diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
index 0a92a7c..4f29e5f1 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss
@@ -31,3 +31,31 @@
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index b7f9d3b..72651f7 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -232,7 +232,7 @@
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 
diff --git a/Documentation/arm/tcm.txt b/Documentation/arm/tcm.txt
new file mode 100644
index 0000000..77fd937
--- /dev/null
+++ b/Documentation/arm/tcm.txt
@@ -0,0 +1,147 @@
+ARM TCM (Tightly-Coupled Memory) handling in Linux
+----
+Written by Linus Walleij <linus.walleij@stericsson.com>
+
+Some ARM SoC:s have a so-called TCM (Tightly-Coupled Memory).
+This is usually just a few (4-64) KiB of RAM inside the ARM
+processor.
+
+Due to being embedded inside the CPU The TCM has a
+Harvard-architecture, so there is an ITCM (instruction TCM)
+and a DTCM (data TCM). The DTCM can not contain any
+instructions, but the ITCM can actually contain data.
+The size of DTCM or ITCM is minimum 4KiB so the typical
+minimum configuration is 4KiB ITCM and 4KiB DTCM.
+
+ARM CPU:s have special registers to read out status, physical
+location and size of TCM memories. arch/arm/include/asm/cputype.h
+defines a CPUID_TCM register that you can read out from the
+system control coprocessor. Documentation from ARM can be found
+at http://infocenter.arm.com, search for "TCM Status Register"
+to see documents for all CPUs. Reading this register you can
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
+
+There is further a TCM region register (search for "TCM Region
+Registers" at the ARM site) that can report and modify the location
+size of TCM memories at runtime. This is used to read out and modify
+TCM location and size. Notice that this is not a MMU table: you
+actually move the physical location of the TCM around. At the
+place you put it, it will mask any underlying RAM from the
+CPU so it is usually wise not to overlap any physical RAM with
+the TCM.
+
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
+
+TCM is used for a few things:
+
+- FIQ and other interrupt handlers that need deterministic
+  timing and cannot wait for cache misses.
+
+- Idle loops where all external RAM is set to self-refresh
+  retention mode, so only on-chip RAM is accessible by
+  the CPU and then we hang inside ITCM waiting for an
+  interrupt.
+
+- Other operations which implies shutting off or reconfiguring
+  the external RAM controller.
+
+There is an interface for using TCM on the ARM architecture
+in <asm/tcm.h>. Using this interface it is possible to:
+
+- Define the physical address and size of ITCM and DTCM.
+
+- Tag functions to be compiled into ITCM.
+
+- Tag data and constants to be allocated to DTCM and ITCM.
+
+- Have the remaining TCM RAM added to a special
+  allocation pool with gen_pool_create() and gen_pool_add()
+  and provice tcm_alloc() and tcm_free() for this
+  memory. Such a heap is great for things like saving
+  device state when shutting off device power domains.
+
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
+
+Functions to go into itcm can be tagged like this:
+int __tcmfunc foo(int bar);
+
+Variables to go into dtcm can be tagged like this:
+int __tcmdata foo;
+
+Constants can be tagged like this:
+int __tcmconst foo;
+
+To put assembler into TCM just use
+.section ".tcm.text" or .section ".tcm.data"
+respectively.
+
+Example code:
+
+#include <asm/tcm.h>
+
+/* Uninitialized data */
+static u32 __tcmdata tcmvar;
+/* Initialized data */
+static u32 __tcmdata tcmassigned = 0x2BADBABEU;
+/* Constant */
+static const u32 __tcmconst tcmconst = 0xCAFEBABEU;
+
+static void __tcmlocalfunc tcm_to_tcm(void)
+{
+	int i;
+	for (i = 0; i < 100; i++)
+		tcmvar ++;
+}
+
+static void __tcmfunc hello_tcm(void)
+{
+	/* Some abstract code that runs in ITCM */
+	int i;
+	for (i = 0; i < 100; i++) {
+		tcmvar ++;
+	}
+	tcm_to_tcm();
+}
+
+static void __init test_tcm(void)
+{
+	u32 *tcmem;
+	int i;
+
+	hello_tcm();
+	printk("Hello TCM executed from ITCM RAM\n");
+
+	printk("TCM variable from testrun: %u @ %p\n", tcmvar, &tcmvar);
+	tcmvar = 0xDEADBEEFU;
+	printk("TCM variable: 0x%x @ %p\n", tcmvar, &tcmvar);
+
+	printk("TCM assigned variable: 0x%x @ %p\n", tcmassigned, &tcmassigned);
+
+	printk("TCM constant: 0x%x @ %p\n", tcmconst, &tcmconst);
+
+	/* Allocate some TCM memory from the pool */
+	tcmem = tcm_alloc(20);
+	if (tcmem) {
+		printk("TCM Allocated 20 bytes of TCM @ %p\n", tcmem);
+		tcmem[0] = 0xDEADBEEFU;
+		tcmem[1] = 0x2BADBABEU;
+		tcmem[2] = 0xCAFEBABEU;
+		tcmem[3] = 0xDEADBEEFU;
+		tcmem[4] = 0x2BADBABEU;
+		for (i = 0; i < 5; i++)
+			printk("TCM tcmem[%d] = %08x\n", i, tcmem[i]);
+		tcm_free(tcmem, 20);
+	}
+}
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 18b5ec8..bf4f4b7 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -282,9 +282,16 @@
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index b5aee78..2c48f94 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1113,7 +1113,6 @@
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 
diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt
index b58b84b..eed520f 100644
--- a/Documentation/filesystems/vfat.txt
+++ b/Documentation/filesystems/vfat.txt
@@ -102,7 +102,7 @@
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps
diff --git a/Documentation/hwmon/ltc4215 b/Documentation/hwmon/ltc4215
index 2e6a21e..c196a18 100644
--- a/Documentation/hwmon/ltc4215
+++ b/Documentation/hwmon/ltc4215
@@ -22,12 +22,13 @@
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries
diff --git a/Documentation/hwmon/ltc4245 b/Documentation/hwmon/ltc4245
index bae7a3a..02838a4 100644
--- a/Documentation/hwmon/ltc4245
+++ b/Documentation/hwmon/ltc4245
@@ -23,12 +23,13 @@
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries
diff --git a/Documentation/i2c/instantiating-devices b/Documentation/i2c/instantiating-devices
index c740b7b..e894902 100644
--- a/Documentation/i2c/instantiating-devices
+++ b/Documentation/i2c/instantiating-devices
@@ -188,7 +188,7 @@
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:
diff --git a/Documentation/isdn/README.gigaset b/Documentation/isdn/README.gigaset
index f996310..0fc9831 100644
--- a/Documentation/isdn/README.gigaset
+++ b/Documentation/isdn/README.gigaset
@@ -5,7 +5,7 @@
      ------------
 1.1. Hardware
      --------
-     This release supports the connection of the Gigaset 307x/417x family of
+     This driver supports the connection of the Gigaset 307x/417x family of
      ISDN DECT bases via Gigaset M101 Data, Gigaset M105 Data or direct USB
      connection. The following devices are reported to be compatible:
 
@@ -33,7 +33,7 @@
               http://gigaset307x.sourceforge.net/
 
      We had also reports from users of Gigaset M105 who could use the drivers
-     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.4.)
+     with SX 100 and CX 100 ISDN bases (only in unimodem mode, see section 2.5.)
      If you have another device that works with our driver, please let us know.
 
      Chances of getting an USB device to work are good if the output of
@@ -49,7 +49,7 @@
      --------
      The driver works with ISDN4linux and so can be used with any software
      which is able to use ISDN4linux for ISDN connections (voice or data).
-     CAPI4Linux support is planned but not yet available.
+     Experimental Kernel CAPI support is available as a compilation option.
 
      There are some user space tools available at
      http://sourceforge.net/projects/gigaset307x/
@@ -102,20 +102,28 @@
 2.3. ISDN4linux
      ----------
      This is the "normal" mode of operation. After loading the module you can
-     set up the ISDN system just as you'd do with any ISDN card.
-     Your distribution should provide some configuration utility.
-     If not, you can use some HOWTOs like
+     set up the ISDN system just as you'd do with any ISDN card supported by
+     the ISDN4Linux subsystem. Most distributions provide some configuration
+     utility. If not, you can use some HOWTOs like
          http://www.linuxhaven.de/dlhp/HOWTO/DE-ISDN-HOWTO-5.html
-     If this doesn't work, because you have some recent device like SX100 where
+     If this doesn't work, because you have some device like SX100 where
      debug output (see section 3.2.) shows something like this when dialing
          CMD Received: ERROR
          Available Params: 0
          Connection State: 0, Response: -1
          gigaset_process_response: resp_code -1 in ConState 0 !
          Timeout occurred
-     you might need to use unimodem mode:
+     you might need to use unimodem mode. (see section 2.5.)
 
-2.4. Unimodem mode
+2.4. CAPI
+     ----
+     If the driver is compiled with CAPI support (kernel configuration option
+     GIGASET_CAPI, experimental) it can also be used with CAPI 2.0 kernel and
+     user space applications.  ISDN4Linux is supported in this configuration
+     via the capidrv compatibility driver. The kernel module capidrv.ko must
+     be loaded explicitly ("modprobe capidrv") if needed.
+
+2.5. Unimodem mode
      -------------
      This is needed for some devices [e.g. SX100] as they have problems with
      the "normal" commands.
@@ -160,7 +168,7 @@
      configuration file like /etc/modprobe.conf.local,
      using that should be preferred.
 
-2.5. Call-ID (CID) mode
+2.6. Call-ID (CID) mode
      ------------------
      Call-IDs are numbers used to tag commands to, and responses from, the
      Gigaset base in order to support the simultaneous handling of multiple
@@ -188,7 +196,7 @@
      You can also use /sys/class/tty/ttyGxy/cidmode for changing the CID mode
      setting (ttyGxy is ttyGU0 or ttyGB0).
 
-2.6. Unregistered Wireless Devices (M101/M105)
+2.7. Unregistered Wireless Devices (M101/M105)
      -----------------------------------------
      The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
      the M101 and M105 wireless devices to be used as ISDN devices for ISDN
@@ -228,7 +236,7 @@
         You have two or more DECT data adapters (M101/M105) and only the
         first one you turn on works.
      Solution:
-        Select Unimodem mode for all DECT data adapters. (see section 2.4.)
+        Select Unimodem mode for all DECT data adapters. (see section 2.5.)
 
      Problem:
 	Messages like this:
@@ -236,7 +244,7 @@
 	appear in your syslog.
      Solution:
 	Check whether your M10x wireless device is correctly registered to the
-	Gigaset base. (see section 2.6.)
+	Gigaset base. (see section 2.7.)
 
 3.2. Telling the driver to provide more information
      ----------------------------------------------
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 6fa7292..02df20b 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2589,6 +2589,9 @@
 	uart6850=	[HW,OSS]
 			Format: <io>,<irq>
 
+	uhash_entries=	[KNL,NET]
+			Set number of hash buckets for UDP/UDP-Lite connections
+
 	uhci-hcd.ignore_oc=
 			[USB] Ignore overcurrent events (default N).
 			Some badly-designed motherboards generate lots of
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 6d03487..aafcaa6 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -199,18 +199,22 @@
 
 Not all bits in the mask can be modified.  Not all bits that can be
 modified do anything.  Not all hot keys can be individually controlled
-by the mask.  Some models do not support the mask at all, and in those
-models, hot keys cannot be controlled individually.  The behaviour of
-the mask is, therefore, highly dependent on the ThinkPad model.
+by the mask.  Some models do not support the mask at all.  The behaviour
+of the mask is, therefore, highly dependent on the ThinkPad model.
+
+The driver will filter out any unmasked hotkeys, so even if the firmware
+doesn't allow disabling an specific hotkey, the driver will not report
+events for unmasked hotkeys.
 
 Note that unmasking some keys prevents their default behavior.  For
 example, if Fn+F5 is unmasked, that key will no longer enable/disable
-Bluetooth by itself.
+Bluetooth by itself in firmware.
 
-Note also that not all Fn key combinations are supported through ACPI.
-For example, on the X40, the brightness, volume and "Access IBM" buttons
-do not generate ACPI events even with this driver.  They *can* be used
-through the "ThinkPad Buttons" utility, see http://www.nongnu.org/tpb/
+Note also that not all Fn key combinations are supported through ACPI
+depending on the ThinkPad model and firmware version.  On those
+ThinkPads, it is still possible to support some extra hotkeys by
+polling the "CMOS NVRAM" at least 10 times per second.  The driver
+attempts to enables this functionality automatically when required.
 
 procfs notes:
 
@@ -255,18 +259,11 @@
 		1: does nothing
 
 	hotkey_mask:
-		bit mask to enable driver-handling (and depending on
+		bit mask to enable reporting (and depending on
 		the firmware, ACPI event generation) for each hot key
 		(see above).  Returns the current status of the hot keys
 		mask, and allows one to modify it.
 
-		Note: when NVRAM polling is active, the firmware mask
-		will be different from the value returned by
-		hotkey_mask.  The driver will retain enabled bits for
-		hotkeys that are under NVRAM polling even if the
-		firmware refuses them, and will not set these bits on
-		the firmware hot key mask.
-
 	hotkey_all_mask:
 		bit mask that should enable event reporting for all
 		supported hot keys, when echoed to hotkey_mask above.
@@ -279,7 +276,8 @@
 		bit mask that should enable event reporting for all
 		supported hot keys, except those which are always
 		handled by the firmware anyway.  Echo it to
-		hotkey_mask above, to use.
+		hotkey_mask above, to use.  This is the default mask
+		used by the driver.
 
 	hotkey_source_mask:
 		bit mask that selects which hot keys will the driver
@@ -287,9 +285,10 @@
 		based on the capabilities reported by the ACPI firmware,
 		but it can be overridden at runtime.
 
-		Hot keys whose bits are set in both hotkey_source_mask
-		and also on hotkey_mask are polled for in NVRAM.  Only a
-		few hot keys are available through CMOS NVRAM polling.
+		Hot keys whose bits are set in hotkey_source_mask are
+		polled for in NVRAM, and reported as hotkey events if
+		enabled in hotkey_mask.  Only a few hot keys are
+		available through CMOS NVRAM polling.
 
 		Warning: when in NVRAM mode, the volume up/down/mute
 		keys are synthesized according to changes in the mixer,
@@ -525,6 +524,7 @@
 0x2305		System is waking up from suspend to eject bay
 0x2404		System is waking up from hibernation to undock
 0x2405		System is waking up from hibernation to eject bay
+0x5010		Brightness level changed/control event
 
 The above events are never propagated by the driver.
 
@@ -532,7 +532,6 @@
 0x4003		Undocked (see 0x2x04), can sleep again
 0x500B		Tablet pen inserted into its storage bay
 0x500C		Tablet pen removed from its storage bay
-0x5010		Brightness level changed (newer Lenovo BIOSes)
 
 The above events are propagated by the driver.
 
@@ -621,6 +620,8 @@
 2. Do *NOT* load up ACPI video, enable the hotkeys in thinkpad-acpi,
    and map them to KEY_BRIGHTNESS_UP and KEY_BRIGHTNESS_DOWN.  Process
    these keys on userspace somehow (e.g. by calling xbacklight).
+   The driver will do this automatically if it detects that ACPI video
+   has been disabled.
 
 
 Bluetooth
@@ -1459,3 +1460,8 @@
 0x020400:	Marker for 16 LEDs support.  Also, LEDs that are known
 		to not exist in a given model are not registered with
 		the LED sysfs class anymore.
+
+0x020500:	Updated hotkey driver, hotkey_mask is always available
+		and it is always able to disable hot keys.  Very old
+		thinkpads are properly supported.  hotkey_bios_mask
+		is deprecated and marked for removal.
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/misc-devices/eeprom
similarity index 100%
rename from Documentation/i2c/chips/eeprom
rename to Documentation/misc-devices/eeprom
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/misc-devices/max6875
similarity index 94%
rename from Documentation/i2c/chips/max6875
rename to Documentation/misc-devices/max6875
index 10ca43c..1e89ee3 100644
--- a/Documentation/i2c/chips/max6875
+++ b/Documentation/misc-devices/max6875
@@ -42,10 +42,12 @@
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index d5181ce..61f516b 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -1,7 +1,7 @@
 
 		Linux Ethernet Bonding Driver HOWTO
 
-		Latest update: 12 November 2007
+		Latest update: 23 September 2009
 
 Initial release : Thomas Davis <tadavis at lbl.gov>
 Corrections, HA extensions : 2000/10/03-15 :
@@ -614,6 +614,46 @@
 
 	The primary option is only valid for active-backup mode.
 
+primary_reselect
+
+	Specifies the reselection policy for the primary slave.  This
+	affects how the primary slave is chosen to become the active slave
+	when failure of the active slave or recovery of the primary slave
+	occurs.  This option is designed to prevent flip-flopping between
+	the primary slave and other slaves.  Possible values are:
+
+	always or 0 (default)
+
+		The primary slave becomes the active slave whenever it
+		comes back up.
+
+	better or 1
+
+		The primary slave becomes the active slave when it comes
+		back up, if the speed and duplex of the primary slave is
+		better than the speed and duplex of the current active
+		slave.
+
+	failure or 2
+
+		The primary slave becomes the active slave only if the
+		current active slave fails and the primary slave is up.
+
+	The primary_reselect setting is ignored in two cases:
+
+		If no slaves are active, the first slave to recover is
+		made the active slave.
+
+		When initially enslaved, the primary slave is always made
+		the active slave.
+
+	Changing the primary_reselect policy via sysfs will cause an
+	immediate selection of the best active slave according to the new
+	policy.  This may or may not result in a change of the active
+	slave, depending upon the circumstances.
+
+	This option was added for bonding version 3.6.0.
+
 updelay
 
 	Specifies the time, in milliseconds, to wait before enabling a
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index fbe427a..a0e134d 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1086,6 +1086,24 @@
 	2: Enable DAD, and disable IPv6 operation if MAC-based duplicate
 	   link-local address has been found.
 
+force_tllao - BOOLEAN
+	Enable sending the target link-layer address option even when
+	responding to a unicast neighbor solicitation.
+	Default: FALSE
+
+	Quoting from RFC 2461, section 4.4, Target link-layer address:
+
+	"The option MUST be included for multicast solicitations in order to
+	avoid infinite Neighbor Solicitation "recursion" when the peer node
+	does not have a cache entry to return a Neighbor Advertisements
+	message.  When responding to unicast solicitations, the option can be
+	omitted since the sender of the solicitation has the correct link-
+	layer address; otherwise it would not have be able to send the unicast
+	solicitation in the first place. However, including the link-layer
+	address in this case adds little overhead and eliminates a potential
+	race condition where the sender deletes the cached link-layer address
+	prior to receiving a response to a previous solicitation."
+
 icmp/*:
 ratelimit - INTEGER
 	Limit the maximal rates for sending ICMPv6 packets.
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
index f1708b7..75fddb4 100644
--- a/Documentation/sound/alsa/HD-Audio-Models.txt
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -209,6 +209,7 @@
   laptop	laptop with HP jack sensing
   mobile	mobile devices with HP jack sensing
   thinkpad	Lenovo Thinkpad X300
+  touchsmart	HP Touchsmart
 
 AD1884
 ======
diff --git a/Documentation/w1/masters/ds2482 b/Documentation/w1/masters/ds2482
index 9210d6f..299b91c 100644
--- a/Documentation/w1/masters/ds2482
+++ b/Documentation/w1/masters/ds2482
@@ -24,8 +24,8 @@
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
 
diff --git a/MAINTAINERS b/MAINTAINERS
index c856aee..0350ace 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -257,6 +257,13 @@
 S:	Supported
 F:	drivers/acpi/fan.c
 
+ACPI PROCESSOR AGGREGATOR DRIVER
+M:	Shaohua Li <shaohua.li@intel.com>
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Supported
+F:	drivers/acpi/acpi_pad.c
+
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -646,24 +653,24 @@
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -683,7 +690,7 @@
 ARM/INTEL IXP4XX ARM ARCHITECTURE
 M:	Imre Kaloz <kaloz@openwrt.org>
 M:	Krzysztof Halasa <khc@pm.waw.pl>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/
 
@@ -691,7 +698,7 @@
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -740,20 +747,37 @@
 M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
-ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
+ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmtx.h
+F:	arch/arm/mach-pxa/palmtx.c
+F:	arch/arm/mach-pxa/include/mach/palmt5.h
+F:	arch/arm/mach-pxa/palmt5.c
+F:	arch/arm/mach-pxa/include/mach/palmld.h
+F:	arch/arm/mach-pxa/palmld.c
+F:	arch/arm/mach-pxa/include/mach/palmte2.h
+F:	arch/arm/mach-pxa/palmte2.c
+F:	arch/arm/mach-pxa/include/mach/palmtc.h
+F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO 680 SUPPORT
 M:	Tomas Cech <sleep_walker@suse.cz>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/treo680.h
+F:	arch/arm/mach-pxa/treo680.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
+L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmz72.h
+F:	arch/arm/mach-pxa/palmz72.c
 
 ARM/PLEB SUPPORT
 M:	Peter Chubb <pleb@gelato.unsw.edu.au>
@@ -1062,7 +1086,6 @@
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-M:	Michael Buesch <mb@bu3sch.de>
 M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
@@ -2678,7 +2701,7 @@
 
 INTEL IOP-ADMA DMA DRIVER
 M:	Dan Williams <dan.j.williams@intel.com>
-S:	Supported
+S:	Maintained
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
diff --git a/Makefile b/Makefile
index f908acc..e50569a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
-SUBLEVEL = 31
-EXTRAVERSION =
+SUBLEVEL = 32
+EXTRAVERSION = -rc3
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h
index 26773e3..06edfef 100644
--- a/arch/alpha/include/asm/socket.h
+++ b/arch/alpha/include/asm/socket.h
@@ -67,6 +67,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index 19b8632..6f80ca4 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -13,6 +13,5 @@
 struct task_struct init_task = INIT_TASK(init_task);
 EXPORT_SYMBOL(init_task);
 
-union thread_union init_thread_union
-	__attribute__((section(".data.init_thread")))
-	= { INIT_THREAD_INFO(init_task) };
+union thread_union init_thread_union __init_task_data =
+	{ INIT_THREAD_INFO(init_task) };
diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S
index 95c9aef..cda6b8b 100644
--- a/arch/alpha/kernel/systbls.S
+++ b/arch/alpha/kernel/systbls.S
@@ -497,6 +497,7 @@
 	.quad sys_signalfd
 	.quad sys_ni_syscall
 	.quad sys_eventfd
+	.quad sys_recvmmsg
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object
diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S
index 6dc03c3..003ef4c 100644
--- a/arch/alpha/kernel/vmlinux.lds.S
+++ b/arch/alpha/kernel/vmlinux.lds.S
@@ -1,4 +1,5 @@
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/thread_info.h>
 #include <asm/page.h>
 
 OUTPUT_FORMAT("elf64-alpha")
@@ -31,88 +32,21 @@
 	} :kernel
 
 	RODATA
-
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	/* Will be freed after init */
-	. = ALIGN(PAGE_SIZE);
-	/* Init code and data */
-	__init_begin = .;
-	.init.text : {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-
-	. = ALIGN(8);
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
-	. = ALIGN(8);
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-
-	. = ALIGN(8);
-	SECURITY_INIT
-
+	__init_begin = ALIGN(PAGE_SIZE);
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	INIT_DATA_SECTION(16)
 	PERCPU(PAGE_SIZE)
-
-	. = ALIGN(2 * PAGE_SIZE);
+	/* Align to THREAD_SIZE rather than PAGE_SIZE here so any padding page
+	   needed for the THREAD_SIZE aligned init_task gets freed after init */
+	. = ALIGN(THREAD_SIZE);
 	__init_end = .;
 	/* Freed after init ends here */
 
-	/* Note 2 page alignment above.  */
-	.data.init_thread : {
-		*(.data.init_thread)
-	}
-
-	. = ALIGN(PAGE_SIZE);
-	.data.page_aligned : {
-		*(.data.page_aligned)
-	}
-
-	. = ALIGN(64);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
-
 	_data = .;
-	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
+	RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
 
 	.got : {
 		*(.got)
@@ -122,16 +56,7 @@
 	}
 	_edata = .;	/* End of data section */
 
-	__bss_start = .;
-	.sbss : {
-		*(.sbss)
-		*(.scommon)
-	}
-	.bss : {
-		*(.bss)
-		*(COMMON)
-	}
-	__bss_stop = .;
+	BSS_SECTION(0, 0, 0)
 	_end = .;
 
 	.mdebug 0 : {
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index d778a69..1c4119c 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -46,6 +46,10 @@
 	depends on GENERIC_CLOCKEVENTS
 	default y if SMP && !LOCAL_TIMERS
 
+config HAVE_TCM
+	bool
+	select GENERIC_ALLOCATOR
+
 config NO_IOPORT
 	bool
 
@@ -649,6 +653,7 @@
 	bool "ST-Ericsson U300 Series"
 	depends on MMU
 	select CPU_ARM926T
+	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_VIC
 	select GENERIC_TIME
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index 2293f0c..bd36c77 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -865,6 +865,7 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_set_dir);
 
 int locomo_gpio_read_level(struct device *dev, unsigned int bits)
 {
@@ -882,6 +883,7 @@
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_level);
 
 int locomo_gpio_read_output(struct device *dev, unsigned int bits)
 {
@@ -899,6 +901,7 @@
 	ret &= bits;
 	return ret;
 }
+EXPORT_SYMBOL(locomo_gpio_read_output);
 
 void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set)
 {
@@ -920,6 +923,7 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_gpio_write);
 
 static void locomo_m62332_sendbit(void *mapbase, int bit)
 {
@@ -1084,13 +1088,12 @@
 
 	spin_unlock_irqrestore(&lchip->lock, flags);
 }
+EXPORT_SYMBOL(locomo_m62332_senddata);
 
 /*
  *	Frontlight control
  */
 
-static struct locomo *locomo_chip_driver(struct locomo_dev *ldev);
-
 void locomo_frontlight_set(struct locomo_dev *dev, int duty, int vr, int bpwf)
 {
 	unsigned long flags;
@@ -1182,11 +1185,13 @@
 	driver->drv.bus = &locomo_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_register);
 
 void locomo_driver_unregister(struct locomo_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(locomo_driver_unregister);
 
 static int __init locomo_init(void)
 {
@@ -1208,11 +1213,3 @@
 MODULE_DESCRIPTION("Sharp LoCoMo core driver");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("John Lenz <lenz@cs.wisc.edu>");
-
-EXPORT_SYMBOL(locomo_driver_register);
-EXPORT_SYMBOL(locomo_driver_unregister);
-EXPORT_SYMBOL(locomo_gpio_set_dir);
-EXPORT_SYMBOL(locomo_gpio_read_level);
-EXPORT_SYMBOL(locomo_gpio_read_output);
-EXPORT_SYMBOL(locomo_gpio_write);
-EXPORT_SYMBOL(locomo_m62332_senddata);
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index ef12794..8ba7044 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -1032,6 +1032,7 @@
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);
diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c
index 920ced0..f232941 100644
--- a/arch/arm/common/vic.c
+++ b/arch/arm/common/vic.c
@@ -22,6 +22,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/sysdev.h>
+#include <linux/device.h>
 #include <linux/amba/bus.h>
 
 #include <asm/mach/irq.h>
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index 1502957..f6aed77 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -90,7 +90,6 @@
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index eec4882..ed2d59d 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,29 +1,26 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Wed Dec 12 16:11:27 2007
+# Linux kernel version: 2.6.31-rc6
+# Tue Aug 18 13:41:41 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,21 +37,39 @@
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -67,29 +82,48 @@
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -103,6 +137,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -112,15 +147,15 @@
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
@@ -128,19 +163,26 @@
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_IOP3XX_ATU=y
 
 #
 # IOP33x Implementation Options
@@ -151,14 +193,6 @@
 #
 CONFIG_ARCH_IQ80331=y
 CONFIG_MACH_IQ80332=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_IOP=y
 
 #
@@ -168,6 +202,7 @@
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -178,7 +213,6 @@
 #
 # CONFIG_ARM_THUMB is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
 # CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
@@ -190,41 +224,55 @@
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
 # Kernel Features
 #
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 # CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc"
+CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp cachepolicy=writealloc iop3xx_init_atu=y"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
 # Floating point emulation
 #
 
@@ -239,6 +287,8 @@
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -247,11 +297,7 @@
 # Power management options
 #
 # CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
 #
@@ -264,6 +310,7 @@
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -310,6 +357,7 @@
 # CONFIG_IPV6_SIT is not set
 # CONFIG_IPV6_TUNNEL is not set
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -317,6 +365,7 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -326,24 +375,31 @@
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
 # CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
 
 #
-# Wireless
+# CFG80211 needs to be enabled for MAC80211
 #
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -357,7 +413,9 @@
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -366,12 +424,14 @@
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 CONFIG_MTD_REDBOOT_PARTS_READONLY=y
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
@@ -421,9 +481,7 @@
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
@@ -447,6 +505,11 @@
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -463,14 +526,29 @@
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
+CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
@@ -492,10 +570,6 @@
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -512,6 +586,8 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -520,13 +596,18 @@
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -543,15 +624,18 @@
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
+CONFIG_MD_AUTODETECT=y
 CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 # CONFIG_MD_RAID10 is not set
 CONFIG_MD_RAID456=y
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
@@ -568,27 +652,34 @@
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_IP1000 is not set
 # CONFIG_ARCNET is not set
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 CONFIG_E1000=y
-CONFIG_E1000_NAPI=y
-# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
 # CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -596,23 +687,34 @@
 # CONFIG_SIS190 is not set
 # CONFIG_SKGE is not set
 # CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 CONFIG_NETDEV_10000=y
 # CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
 # CONFIG_CHELSIO_T3 is not set
+# CONFIG_ENIC is not set
 # CONFIG_IXGBE is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
 # CONFIG_MYRI10GE is not set
 # CONFIG_NETXEN_NIC is not set
 # CONFIG_NIU is not set
+# CONFIG_MLX4_EN is not set
 # CONFIG_MLX4_CORE is not set
 # CONFIG_TEHUTI is not set
+# CONFIG_BNX2X is not set
+# CONFIG_QLGE is not set
+# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
 # CONFIG_TR is not set
 
 #
@@ -620,13 +722,16 @@
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
 # CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -670,10 +775,13 @@
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
 
 #
 # Serial drivers
@@ -692,11 +800,12 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -705,67 +814,97 @@
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
-# CONFIG_I2C_ALGOBIT is not set
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_IOP3XX=y
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IOP3XX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
 
 #
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
 # Miscellaneous I2C Chip support
 #
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# SPI support
+# Memory mapped GPIO expanders:
 #
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
@@ -773,13 +912,17 @@
 # CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
 # CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
 # CONFIG_SENSORS_ATXP1 is not set
 # CONFIG_SENSORS_DS1621 is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
 # CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_GL520SM is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -794,16 +937,23 @@
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_MAX6650 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_DME1737 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -812,28 +962,38 @@
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
 #
+# CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -854,15 +1014,16 @@
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-
-#
-# Sound
-#
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
 # CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -870,14 +1031,21 @@
 # CONFIG_USB is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# Enable Host or Gadget support to see Inventra options
 #
 
 #
-# USB Gadget Support
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 # CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_UWB is not set
 # CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
@@ -893,6 +1061,12 @@
 # DMA Clients
 #
 CONFIG_NET_DMA=y
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
@@ -901,10 +1075,11 @@
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
@@ -913,17 +1088,23 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -941,15 +1122,13 @@
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -959,29 +1138,31 @@
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
 CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
+CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
-CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1013,9 +1194,6 @@
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_NLS is not set
 # CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 
 #
 # Kernel hacking
@@ -1023,6 +1201,7 @@
 # CONFIG_PRINTK_TIME is not set
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
@@ -1030,10 +1209,17 @@
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
 CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1047,16 +1233,41 @@
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
 CONFIG_DEBUG_LL=y
 # CONFIG_DEBUG_ICEDCC is not set
 
@@ -1065,24 +1276,117 @@
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_XOR_BLOCKS=y
 CONFIG_ASYNC_CORE=y
 CONFIG_ASYNC_MEMCPY=y
 CONFIG_ASYNC_XOR=y
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/littleton_defconfig b/arch/arm/configs/littleton_defconfig
deleted file mode 100644
index 1db4969..0000000
--- a/arch/arm/configs/littleton_defconfig
+++ /dev/null
@@ -1,783 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc5
-# Fri Dec 21 11:06:19 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-# CONFIG_CPU_PXA320 is not set
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-# CONFIG_MACH_ZYLONITE is not set
-CONFIG_MACH_LITTLETON=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-CONFIG_PXA_SSP=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=64M"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-CONFIG_FONT_8x16=y
-# CONFIG_FONT_6x11 is not set
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_MAGIC_SYSRQ=y
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_HW=y
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_CRC_CCITT=y
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
new file mode 100644
index 0000000..733b851
--- /dev/null
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -0,0 +1,1332 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc1
+# Mon Jul 13 22:48:49 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_CLASSIC_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+# CONFIG_MODULE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Supported PXA3xx Processor Variants
+#
+CONFIG_CPU_PXA300=y
+CONFIG_CPU_PXA310=y
+CONFIG_CPU_PXA320=y
+CONFIG_CPU_PXA930=y
+CONFIG_CPU_PXA935=y
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+CONFIG_MACH_ZYLONITE=y
+CONFIG_MACH_LITTLETON=y
+CONFIG_MACH_TAVOREVB=y
+CONFIG_MACH_SAAR=y
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_PXA3xx=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSC3=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_IO_36=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_XSC3L2=y
+CONFIG_IWMMXT=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=64M debug"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_H1900 is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_SHARPSL is not set
+CONFIG_MTD_NAND_PXA3xx=y
+CONFIG_MTD_NAND_PXA3xx_BUILTIN=y
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+CONFIG_KEYBOARD_PXA27x=y
+CONFIG_KEYBOARD_PXA930_ROTARY=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+CONFIG_MOUSE_PXA930_TRKBALL=y
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+CONFIG_TOUCHSCREEN_DA9034=y
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+# CONFIG_I2C_ALGOBIT is not set
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+CONFIG_GPIO_MAX732X=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_GPIO_MAX7301=y
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_SUPPLY_DEBUG=y
+CONFIG_PDA_POWER=y
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+CONFIG_BATTERY_DA9030=y
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+CONFIG_PMIC_DA903X=y
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=y
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+# CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_DA903X=y
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+CONFIG_FONT_6x11=y
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+CONFIG_LEDS_DA903X=m
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
new file mode 100644
index 0000000..33bb725
--- /dev/null
+++ b/arch/arm/configs/xcep_defconfig
@@ -0,0 +1,1129 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.31-rc6
+# Thu Aug 20 09:02:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=".xcep-itech"
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+# CONFIG_UID16 is not set
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+# CONFIG_SHMEM is not set
+CONFIG_AIO=y
+
+#
+# Performance Counters
+#
+# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_MARKERS=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLOCK is not set
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+# CONFIG_MACH_ZYLONITE is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_PXA_EZX is not set
+CONFIG_MACH_XCEP=y
+CONFIG_PXA25x=y
+CONFIG_PXA_SSP=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=mtd4 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=m
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+
+#
+# SCSI device support
+#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_PXA=y
+CONFIG_SERIAL_PXA_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=m
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=m
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=m
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+CONFIG_SENSORS_ADM1021=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+CONFIG_SENSORS_MAX6650=m
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_FILE_LOCKING=y
+# CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=m
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=m
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=m
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="utf8"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/zylonite_defconfig b/arch/arm/configs/zylonite_defconfig
deleted file mode 100644
index 7949d04..0000000
--- a/arch/arm/configs/zylonite_defconfig
+++ /dev/null
@@ -1,736 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23
-# Tue Oct 23 13:33:20 2007
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-# CONFIG_EMBEDDED is not set
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_PNX4008 is not set
-CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-
-#
-# Intel PXA2xx/PXA3xx Implementations
-#
-
-#
-# Supported PXA3xx Processor Variants
-#
-CONFIG_CPU_PXA300=y
-CONFIG_CPU_PXA310=y
-CONFIG_CPU_PXA320=y
-# CONFIG_ARCH_LUBBOCK is not set
-# CONFIG_MACH_LOGICPD_PXA270 is not set
-# CONFIG_MACH_MAINSTONE is not set
-# CONFIG_ARCH_PXA_IDP is not set
-# CONFIG_PXA_SHARPSL is not set
-# CONFIG_MACH_TRIZEPS4 is not set
-# CONFIG_MACH_EM_X270 is not set
-CONFIG_MACH_ZYLONITE=y
-# CONFIG_MACH_ARMCORE is not set
-CONFIG_PXA3xx=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_XSC3=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_IO_36=y
-
-#
-# Processor Features
-#
-# CONFIG_ARM_THUMB is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-CONFIG_IWMMXT=y
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_PREEMPT is not set
-CONFIG_HZ=100
-CONFIG_AEABI=y
-CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfs/rootfs/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS0,38400 mem=64M debug"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_FPE_NWFPE=y
-# CONFIG_FPE_NWFPE_XP is not set
-# CONFIG_FPE_FASTFPE is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_SUSPEND_UP_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-CONFIG_FB=y
-# CONFIG_FIRMWARE_EDID is not set
-# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-# CONFIG_FB_SYS_FILLRECT is not set
-# CONFIG_FB_SYS_COPYAREA is not set
-# CONFIG_FB_SYS_IMAGEBLIT is not set
-# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-
-#
-# Frame buffer hardware drivers
-#
-# CONFIG_FB_S1D13XXX is not set
-CONFIG_FB_PXA=y
-# CONFIG_FB_PXA_PARAMETERS is not set
-# CONFIG_FB_MBX is not set
-# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FONTS=y
-# CONFIG_FONT_8x8 is not set
-# CONFIG_FONT_8x16 is not set
-CONFIG_FONT_6x11=y
-# CONFIG_FONT_7x14 is not set
-# CONFIG_FONT_PEARL_8x8 is not set
-# CONFIG_FONT_ACORN_8x8 is not set
-# CONFIG_FONT_MINI_4x6 is not set
-# CONFIG_FONT_SUN8x16 is not set
-# CONFIG_FONT_SUN12x22 is not set
-# CONFIG_FONT_10x18 is not set
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_DIRECTIO=y
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_ACL_SUPPORT=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_BIND34 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-CONFIG_DEBUG_USER=y
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_MANAGER=y
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_HW is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h
index 9ed2377..d0daeab 100644
--- a/arch/arm/include/asm/atomic.h
+++ b/arch/arm/include/asm/atomic.h
@@ -19,31 +19,21 @@
 
 #ifdef __KERNEL__
 
+/*
+ * On ARM, ordinary assignment (str instruction) doesn't clear the local
+ * strex/ldrex monitor on some implementations. The reason we can use it for
+ * atomic_set() is the clrex or dummy strex done on every exception return.
+ */
 #define atomic_read(v)	((v)->counter)
+#define atomic_set(v,i)	(((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
 
 /*
  * ARMv6 UP and SMP safe atomic ops.  We use load exclusive and
  * store exclusive to ensure that these are atomic.  We may loop
- * to ensure that the update happens.  Writing to 'v->counter'
- * without using the following operations WILL break the atomic
- * nature of these ops.
+ * to ensure that the update happens.
  */
-static inline void atomic_set(atomic_t *v, int i)
-{
-	unsigned long tmp;
-
-	__asm__ __volatile__("@ atomic_set\n"
-"1:	ldrex	%0, [%1]\n"
-"	strex	%0, %2, [%1]\n"
-"	teq	%0, #0\n"
-"	bne	1b"
-	: "=&r" (tmp)
-	: "r" (&v->counter), "r" (i)
-	: "cc");
-}
-
 static inline void atomic_add(int i, atomic_t *v)
 {
 	unsigned long tmp;
@@ -163,8 +153,6 @@
 #error SMP not supported on pre-ARMv6 CPUs
 #endif
 
-#define atomic_set(v,i)	(((v)->counter) = (i))
-
 static inline int atomic_add_return(int i, atomic_t *v)
 {
 	unsigned long flags;
diff --git a/arch/arm/include/asm/cache.h b/arch/arm/include/asm/cache.h
index feaa75f..66c160b 100644
--- a/arch/arm/include/asm/cache.h
+++ b/arch/arm/include/asm/cache.h
@@ -4,7 +4,7 @@
 #ifndef __ASMARM_CACHE_H
 #define __ASMARM_CACHE_H
 
-#define L1_CACHE_SHIFT		5
+#define L1_CACHE_SHIFT		CONFIG_ARM_L1_CACHE_SHIFT
 #define L1_CACHE_BYTES		(1 << L1_CACHE_SHIFT)
 
 /*
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index b3e656c..20ae96c 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -63,6 +63,11 @@
 	return read_cpuid(CPUID_CACHETYPE);
 }
 
+static inline unsigned int __attribute_const__ read_cpuid_tcmstatus(void)
+{
+	return read_cpuid(CPUID_TCM);
+}
+
 /*
  * Intel's XScale3 core supports some v6 features (supersections, L2)
  * but advertises itself as v5 as it does not support the v6 ISA.  For
@@ -73,7 +78,10 @@
 #else
 static inline int cpu_is_xsc3(void)
 {
-	if ((read_cpuid_id() & 0xffffe000) == 0x69056000)
+	unsigned int id;
+	id = read_cpuid_id() & 0xffffe000;
+	/* It covers both Intel ID and Marvell ID */
+	if ((id == 0x69056000) || (id == 0x56056000))
 		return 1;
 
 	return 0;
diff --git a/arch/arm/include/asm/glue.h b/arch/arm/include/asm/glue.h
index a0e39d5d00..234a3fc 100644
--- a/arch/arm/include/asm/glue.h
+++ b/arch/arm/include/asm/glue.h
@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER legacy_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 4b8e7f5..8d60ad26 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -215,6 +215,7 @@
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
new file mode 100644
index 0000000..59303e2
--- /dev/null
+++ b/arch/arm/include/asm/smp_plat.h
@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 92ac61d..90ffd04 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h
new file mode 100644
index 0000000..5929ef5
--- /dev/null
+++ b/arch/arm/include/asm/tcm.h
@@ -0,0 +1,31 @@
+/*
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ */
+#ifndef __ASMARM_TCM_H
+#define __ASMARM_TCM_H
+
+#ifndef CONFIG_HAVE_TCM
+#error "You should not be including tcm.h unless you have a TCM!"
+#endif
+
+#include <linux/compiler.h>
+
+/* Tag variables with this */
+#define __tcmdata __section(.tcm.data)
+/* Tag constants with this */
+#define __tcmconst __section(.tcm.rodata)
+/* Tag functions inside TCM called from outside TCM with this */
+#define __tcmfunc __attribute__((long_call)) __section(.tcm.text) noinline
+/* Tag function inside TCM called from inside TCM  with this */
+#define __tcmlocalfunc __section(.tcm.text)
+
+void *tcm_alloc(size_t len);
+void tcm_free(void *addr, size_t len);
+
+#endif
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 073e85b..bc63116 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -35,7 +35,9 @@
 
 #define ARM(x...)
 #define THUMB(x...)	x
+#ifdef __ASSEMBLY__
 #define W(instr)	instr.w
+#endif
 #define BSYM(sym)	sym + 1
 
 #else	/* !CONFIG_THUMB2_KERNEL */
@@ -45,7 +47,9 @@
 
 #define ARM(x...)	x
 #define THUMB(x...)
+#ifdef __ASSEMBLY__
 #define W(instr)	instr
+#endif
 #define BSYM(sym)	sym
 
 #endif	/* CONFIG_THUMB2_KERNEL */
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 89f7ead..7020217 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index c446aef..79087dd 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -35,6 +35,7 @@
 obj-$(CONFIG_ARM_THUMBEE)	+= thumbee.o
 obj-$(CONFIG_KGDB)		+= kgdb.o
 obj-$(CONFIG_ARM_UNWIND)	+= unwind.o
+obj-$(CONFIG_HAVE_TCM)		+= tcm.o
 
 obj-$(CONFIG_CRUNCH)		+= crunch.o crunch-bits.o
 AFLAGS_crunch-bits.o		:= -Wa,-mcpu=ep9312
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fafce1b..f58c115 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -374,6 +374,7 @@
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
+/* 365 */	CALL(sys_recvmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3d727a8..322410b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -272,7 +272,15 @@
 	@
 	@  r0 - instruction
 	@
+#ifndef	CONFIG_THUMB2_KERNEL
 	ldr	r0, [r2, #-4]
+#else
+	ldrh	r0, [r2, #-2]			@ Thumb instruction at LR - 2
+	and	r9, r0, #0xf800
+	cmp	r9, #0xe800			@ 32-bit instruction if xx >= 0
+	ldrhhs	r9, [r2]			@ bottom 16 bits
+	orrhs	r0, r9, r0, lsl #16
+#endif
 	adr	r9, BSYM(1f)
 	bl	call_fpe
 
@@ -303,22 +311,16 @@
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -678,7 +680,9 @@
 	.word	no_fp
 	.previous
 
-no_fp:	mov	pc, lr
+ENTRY(no_fp)
+	mov	pc, lr
+ENDPROC(no_fp)
 
 __und_usr_unknown:
 	enable_irq
@@ -691,16 +695,16 @@
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */
@@ -734,13 +738,6 @@
 #ifdef CONFIG_MMU
 	ldr	r6, [r2, #TI_CPU_DOMAIN]
 #endif
-#if __LINUX_ARM_ARCH__ >= 6
-#ifdef CONFIG_CPU_32v6K
-	clrex
-#else
-	strex	r5, r4, [ip]			@ Clear exclusive monitor
-#endif
-#endif
 #if defined(CONFIG_HAS_TLS_REG)
 	mcr	p15, 0, r3, c13, c0, 3		@ set TLS register
 #elif !defined(CONFIG_TLS_REG_EMUL)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 807cfeb..f0fe95b 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -126,7 +126,7 @@
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -425,13 +425,6 @@
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a4eaf4f..ac34c0d 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -76,13 +76,27 @@
 #ifndef CONFIG_THUMB2_KERNEL
 	.macro	svc_exit, rpsr
 	msr	spsr_cxsf, \rpsr
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
 	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#elif defined (CONFIG_CPU_V6)
+	ldr	r0, [sp]
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+	ldmib	sp, {r1 - pc}^			@ load r1 - pc, cpsr
+#else
+	ldmia	sp, {r0 - pc}^			@ load r0 - pc, cpsr
+#endif
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
 	ldr	lr, [sp, #\offset + S_PC]!	@ get pc
 	msr	spsr_cxsf, r1			@ save in spsr_svc
+#if defined(CONFIG_CPU_32v6K)
+	clrex					@ clear the exclusive monitor
+#elif defined (CONFIG_CPU_V6)
+	strex	r1, r2, [sp]			@ clear the exclusive monitor
+#endif
 	.if	\fast
 	ldmdb	sp, {r1 - lr}^			@ get calling r1 - lr
 	.else
@@ -98,6 +112,7 @@
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
+	clrex					@ clear the exclusive monitor
 	ldr	r0, [sp, #S_SP]			@ top of the stack
 	ldr	r1, [sp, #S_PC]			@ return address
 	tst	r0, #4				@ orig stack 8-byte aligned?
@@ -110,6 +125,7 @@
 	.endm
 
 	.macro	restore_user_regs, fast = 0, offset = 0
+	clrex					@ clear the exclusive monitor
 	mov	r2, sp
 	load_user_sp_lr r2, r3, \offset + S_SP	@ calling sp, lr
 	ldr	r1, [sp, #\offset + S_PSR]	@ get calling cpsr
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 93ad576..885a721 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE
diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c
index f692efd..60c62c3 100644
--- a/arch/arm/kernel/kprobes.c
+++ b/arch/arm/kernel/kprobes.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/kprobes.h>
 #include <linux/module.h>
+#include <linux/stop_machine.h>
 #include <linux/stringify.h>
 #include <asm/traps.h>
 #include <asm/cacheflush.h>
@@ -83,10 +84,24 @@
 	flush_insns(p->addr, 1);
 }
 
+/*
+ * The actual disarming is done here on each CPU and synchronized using
+ * stop_machine. This synchronization is necessary on SMP to avoid removing
+ * a probe between the moment the 'Undefined Instruction' exception is raised
+ * and the moment the exception handler reads the faulting instruction from
+ * memory.
+ */
+int __kprobes __arch_disarm_kprobe(void *p)
+{
+	struct kprobe *kp = p;
+	*kp->addr = kp->opcode;
+	flush_insns(kp->addr, 1);
+	return 0;
+}
+
 void __kprobes arch_disarm_kprobe(struct kprobe *p)
 {
-	*p->addr = p->opcode;
-	flush_insns(p->addr, 1);
+	stop_machine(__arch_disarm_kprobe, p, &cpu_online_map);
 }
 
 void __kprobes arch_remove_kprobe(struct kprobe *p)
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index d4d4f77..c6c57b6 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -45,6 +45,7 @@
 
 #include "compat.h"
 #include "atags.h"
+#include "tcm.h"
 
 #ifndef MEM_SIZE
 #define MEM_SIZE	(16*1024*1024)
@@ -749,6 +750,7 @@
 #endif
 
 	cpu_init();
+	tcm_init();
 
 	/*
 	 * Set up various architecture-specific pointers
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index e0d3277..57162af 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -153,7 +154,7 @@
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -200,7 +201,7 @@
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -214,7 +215,7 @@
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -586,12 +587,6 @@
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index d8c88c6..a73a34d 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -166,10 +166,12 @@
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif
diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c
new file mode 100644
index 0000000..e503038
--- /dev/null
+++ b/arch/arm/kernel/tcm.c
@@ -0,0 +1,246 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/ioport.h>
+#include <linux/genalloc.h>
+#include <linux/string.h> /* memcpy */
+#include <asm/page.h> /* PAGE_SHIFT */
+#include <asm/cputype.h>
+#include <asm/mach/map.h>
+#include <mach/memory.h>
+#include "tcm.h"
+
+/* Scream and warn about misuse */
+#if !defined(ITCM_OFFSET) || !defined(ITCM_END) || \
+    !defined(DTCM_OFFSET) || !defined(DTCM_END)
+#error "TCM support selected but offsets not defined!"
+#endif
+
+static struct gen_pool *tcm_pool;
+
+/* TCM section definitions from the linker */
+extern char __itcm_start, __sitcm_text, __eitcm_text;
+extern char __dtcm_start, __sdtcm_data, __edtcm_data;
+
+/*
+ * TCM memory resources
+ */
+static struct resource dtcm_res = {
+	.name = "DTCM RAM",
+	.start = DTCM_OFFSET,
+	.end = DTCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct resource itcm_res = {
+	.name = "ITCM RAM",
+	.start = ITCM_OFFSET,
+	.end = ITCM_END,
+	.flags = IORESOURCE_MEM
+};
+
+static struct map_desc dtcm_iomap[] __initdata = {
+	{
+		.virtual	= DTCM_OFFSET,
+		.pfn		= __phys_to_pfn(DTCM_OFFSET),
+		.length		= (DTCM_END - DTCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+static struct map_desc itcm_iomap[] __initdata = {
+	{
+		.virtual	= ITCM_OFFSET,
+		.pfn		= __phys_to_pfn(ITCM_OFFSET),
+		.length		= (ITCM_END - ITCM_OFFSET + 1),
+		.type		= MT_UNCACHED
+	}
+};
+
+/*
+ * Allocate a chunk of TCM memory
+ */
+void *tcm_alloc(size_t len)
+{
+	unsigned long vaddr;
+
+	if (!tcm_pool)
+		return NULL;
+
+	vaddr = gen_pool_alloc(tcm_pool, len);
+	if (!vaddr)
+		return NULL;
+
+	return (void *) vaddr;
+}
+EXPORT_SYMBOL(tcm_alloc);
+
+/*
+ * Free a chunk of TCM memory
+ */
+void tcm_free(void *addr, size_t len)
+{
+	gen_pool_free(tcm_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(tcm_free);
+
+
+static void __init setup_tcm_bank(u8 type, u32 offset, u32 expected_size)
+{
+	const int tcm_sizes[16] = { 0, -1, -1, 4, 8, 16, 32, 64, 128,
+				    256, 512, 1024, -1, -1, -1, -1 };
+	u32 tcm_region;
+	int tcm_size;
+
+	/* Read the special TCM region register c9, 0 */
+	if (!type)
+		asm("mrc	p15, 0, %0, c9, c1, 0"
+		    : "=r" (tcm_region));
+	else
+		asm("mrc	p15, 0, %0, c9, c1, 1"
+		    : "=r" (tcm_region));
+
+	tcm_size = tcm_sizes[(tcm_region >> 2) & 0x0f];
+	if (tcm_size < 0) {
+		pr_err("CPU: %sTCM of unknown size!\n",
+			type ? "I" : "D");
+	} else {
+		pr_info("CPU: found %sTCM %dk @ %08x, %senabled\n",
+			type ? "I" : "D",
+			tcm_size,
+			(tcm_region & 0xfffff000U),
+			(tcm_region & 1) ? "" : "not ");
+	}
+
+	if (tcm_size != expected_size) {
+		pr_crit("CPU: %sTCM was detected %dk but expected %dk!\n",
+		       type ? "I" : "D",
+		       tcm_size,
+		       expected_size);
+		/* Adjust to the expected size? what can we do... */
+	}
+
+	/* Force move the TCM bank to where we want it, enable */
+	tcm_region = offset | (tcm_region & 0x00000ffeU) | 1;
+
+	if (!type)
+		asm("mcr	p15, 0, %0, c9, c1, 0"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+	else
+		asm("mcr	p15, 0, %0, c9, c1, 1"
+		    : /* No output operands */
+		    : "r" (tcm_region));
+
+	pr_debug("CPU: moved %sTCM %dk to %08x, enabled\n",
+		 type ? "I" : "D",
+		 tcm_size,
+		 (tcm_region & 0xfffff000U));
+}
+
+/*
+ * This initializes the TCM memory
+ */
+void __init tcm_init(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	char *start;
+	char *end;
+	char *ram;
+
+	/* Setup DTCM if present */
+	if (tcm_status & (1 << 16)) {
+		setup_tcm_bank(0, DTCM_OFFSET,
+			       (DTCM_END - DTCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &dtcm_res);
+		iotable_init(dtcm_iomap, 1);
+		/* Copy data from RAM to DTCM */
+		start = &__sdtcm_data;
+		end   = &__edtcm_data;
+		ram   = &__dtcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU DTCM: copied data from %p - %p\n", start, end);
+	}
+
+	/* Setup ITCM if present */
+	if (tcm_status & 1) {
+		setup_tcm_bank(1, ITCM_OFFSET,
+			       (ITCM_END - ITCM_OFFSET + 1) >> 10);
+		request_resource(&iomem_resource, &itcm_res);
+		iotable_init(itcm_iomap, 1);
+		/* Copy code from RAM to ITCM */
+		start = &__sitcm_text;
+		end   = &__eitcm_text;
+		ram   = &__itcm_start;
+		memcpy(start, ram, (end-start));
+		pr_debug("CPU ITCM: copied code from %p - %p\n", start, end);
+	}
+}
+
+/*
+ * This creates the TCM memory pool and has to be done later,
+ * during the core_initicalls, since the allocator is not yet
+ * up and running when the first initialization runs.
+ */
+static int __init setup_tcm_pool(void)
+{
+	u32 tcm_status = read_cpuid_tcmstatus();
+	u32 dtcm_pool_start = (u32) &__edtcm_data;
+	u32 itcm_pool_start = (u32) &__eitcm_text;
+	int ret;
+
+	/*
+	 * Set up malloc pool, 2^2 = 4 bytes granularity since
+	 * the TCM is sometimes just 4 KiB. NB: pages and cache
+	 * line alignments does not matter in TCM!
+	 */
+	tcm_pool = gen_pool_create(2, -1);
+
+	pr_debug("Setting up TCM memory pool\n");
+
+	/* Add the rest of DTCM to the TCM pool */
+	if (tcm_status & (1 << 16)) {
+		if (dtcm_pool_start < DTCM_END) {
+			ret = gen_pool_add(tcm_pool, dtcm_pool_start,
+					   DTCM_END - dtcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU DTCM: could not add DTCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU DTCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 DTCM_END - dtcm_pool_start + 1,
+				 dtcm_pool_start);
+		}
+	}
+
+	/* Add the rest of ITCM to the TCM pool */
+	if (tcm_status & 1) {
+		if (itcm_pool_start < ITCM_END) {
+			ret = gen_pool_add(tcm_pool, itcm_pool_start,
+					   ITCM_END - itcm_pool_start + 1, -1);
+			if (ret) {
+				pr_err("CPU ITCM: could not add ITCM " \
+				       "remainder to pool!\n");
+				return ret;
+			}
+			pr_debug("CPU ITCM: Added %08x bytes @ %08x to " \
+				 "the TCM memory pool\n",
+				 ITCM_END - itcm_pool_start + 1,
+				 itcm_pool_start);
+		}
+	}
+	return 0;
+}
+
+core_initcall(setup_tcm_pool);
diff --git a/arch/arm/kernel/tcm.h b/arch/arm/kernel/tcm.h
new file mode 100644
index 0000000..8015ad4
--- /dev/null
+++ b/arch/arm/kernel/tcm.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * TCM memory handling for ARM systems
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Rickard Andersson <rickard.andersson@stericsson.com>
+ */
+
+#ifdef CONFIG_HAVE_TCM
+void __init tcm_init(void);
+#else
+/* No TCM support, just blank inlines to be optimized out */
+inline void tcm_init(void)
+{
+}
+#endif
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 57eb0f6..467b69e 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -418,12 +418,14 @@
 static inline void
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
+	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
 		return;
 
-	vma = find_vma(current->active_mm, start);
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
 	if (vma && vma->vm_start < end) {
 		if (start < vma->vm_start)
 			start = vma->vm_start;
@@ -432,6 +434,7 @@
 
 		flush_cache_user_range(vma, start, end);
 	}
+	up_read(&mm->mmap_sem);
 }
 
 /*
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index 5cc4812..aecf87df 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -199,6 +199,63 @@
 	}
 	_edata_loc = __data_loc + SIZEOF(.data);
 
+#ifdef CONFIG_HAVE_TCM
+        /*
+	 * We align everything to a page boundary so we can
+	 * free it after init has commenced and TCM contents have
+	 * been copied to its destination.
+	 */
+	.tcm_start : {
+		. = ALIGN(PAGE_SIZE);
+		__tcm_start = .;
+		__itcm_start = .;
+	}
+
+	/*
+	 * Link these to the ITCM RAM
+	 * Put VMA to the TCM address and LMA to the common RAM
+	 * and we'll upload the contents from RAM to TCM and free
+	 * the used RAM after that.
+	 */
+	.text_itcm ITCM_OFFSET : AT(__itcm_start)
+	{
+		__sitcm_text = .;
+		*(.tcm.text)
+		*(.tcm.rodata)
+		. = ALIGN(4);
+		__eitcm_text = .;
+	}
+
+	/*
+	 * Reset the dot pointer, this is needed to create the
+	 * relative __dtcm_start below (to be used as extern in code).
+	 */
+	. = ADDR(.tcm_start) + SIZEOF(.tcm_start) + SIZEOF(.text_itcm);
+
+	.dtcm_start : {
+		__dtcm_start = .;
+	}
+
+	/* TODO: add remainder of ITCM as well, that can be used for data! */
+	.data_dtcm DTCM_OFFSET : AT(__dtcm_start)
+	{
+		. = ALIGN(4);
+		__sdtcm_data = .;
+		*(.tcm.data)
+		. = ALIGN(4);
+		__edtcm_data = .;
+	}
+
+	/* Reset the dot pointer or the linker gets confused */
+	. = ADDR(.dtcm_start) + SIZEOF(.data_dtcm);
+
+	/* End marker for freeing TCM copy in linked object */
+	.tcm_end : AT(ADDR(.dtcm_start) + SIZEOF(.data_dtcm)){
+		. = ALIGN(PAGE_SIZE);
+		__tcm_end = .;
+	}
+#endif
+
 	.bss : {
 		__bss_start = .;	/* BSS				*/
 		*(.bss)
diff --git a/arch/arm/lib/copy_page.S b/arch/arm/lib/copy_page.S
index 6ae04db..6ee2f67 100644
--- a/arch/arm/lib/copy_page.S
+++ b/arch/arm/lib/copy_page.S
@@ -12,8 +12,9 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <asm/asm-offsets.h>
+#include <asm/cache.h>
 
-#define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
+#define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
 
 		.text
 		.align	5
@@ -26,17 +27,16 @@
 ENTRY(copy_page)
 		stmfd	sp!, {r4, lr}			@	2
 	PLD(	pld	[r1, #0]		)
-	PLD(	pld	[r1, #32]		)
+	PLD(	pld	[r1, #L1_CACHE_BYTES]		)
 		mov	r2, #COPY_COUNT			@	1
 		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-1:	PLD(	pld	[r1, #64]		)
-	PLD(	pld	[r1, #96]		)
-2:		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
-		stmia	r0!, {r3, r4, ip, lr}		@	4
-		ldmia	r1!, {r3, r4, ip, lr}		@	4+1
+1:	PLD(	pld	[r1, #2 * L1_CACHE_BYTES])
+	PLD(	pld	[r1, #3 * L1_CACHE_BYTES])
+2:
+	.rept	(2 * L1_CACHE_BYTES / 16 - 1)
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmia	r1!, {r3, r4, ip, lr}		@	4
+	.endr
 		subs	r2, r2, #1			@	1
 		stmia	r0!, {r3, r4, ip, lr}		@	4
 		ldmgtia	r1!, {r3, r4, ip, lr}		@	4
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index 412aa49..d1f775e 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -771,9 +771,9 @@
  *  AC97
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
 static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct atmel_ac97_data ac97_data;
+static struct ac97c_platform_data ac97_data;
 
 static struct resource ac97_resources[] = {
 	[0] = {
@@ -789,7 +789,7 @@
 };
 
 static struct platform_device at91cap9_ac97_device = {
-	.name		= "ac97c",
+	.name		= "atmel_ac97c",
 	.id		= 1,
 	.dev		= {
 				.dma_mask		= &ac97_dmamask,
@@ -800,7 +800,7 @@
 	.num_resources	= ARRAY_SIZE(ac97_resources),
 };
 
-void __init at91_add_device_ac97(struct atmel_ac97_data *data)
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
 {
 	if (!data)
 		return;
@@ -818,7 +818,7 @@
 	platform_device_register(&at91cap9_ac97_device);
 }
 #else
-void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index d746e86..d581cff 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -24,11 +24,59 @@
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
 /* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 8,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9G45_ID_DMA,
+		.end	= AT91SAM9G45_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  USB Host (OHCI)
  * -------------------------------------------------------------------- */
 
@@ -550,6 +598,61 @@
 
 
 /* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_AC97C,
+		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_AC97C,
+		.end	= AT91SAM9G45_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9g45_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9g45_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
@@ -1220,6 +1323,7 @@
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 7281865..d345f54 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -21,11 +21,57 @@
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91sam9_smc.h>
+#include <mach/at_hdmac.h>
 
 #include "generic.h"
 
 
 /* --------------------------------------------------------------------
+ *  HDMAC - AHB DMA Controller
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
+static u64 hdmac_dmamask = DMA_BIT_MASK(32);
+
+static struct at_dma_platform_data atdma_pdata = {
+	.nr_channels	= 2,
+};
+
+static struct resource hdmac_resources[] = {
+	[0] = {
+		.start	= AT91_BASE_SYS + AT91_DMA,
+		.end	= AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= AT91SAM9RL_ID_DMA,
+		.end	= AT91SAM9RL_ID_DMA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at_hdmac_device = {
+	.name		= "at_hdmac",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &hdmac_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &atdma_pdata,
+	},
+	.resource	= hdmac_resources,
+	.num_resources	= ARRAY_SIZE(hdmac_resources),
+};
+
+void __init at91_add_device_hdmac(void)
+{
+	dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
+	platform_device_register(&at_hdmac_device);
+}
+#else
+void __init at91_add_device_hdmac(void) {}
+#endif
+
+/* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
@@ -398,6 +444,61 @@
 
 
 /* --------------------------------------------------------------------
+ *  AC97
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
+static u64 ac97_dmamask = DMA_BIT_MASK(32);
+static struct ac97c_platform_data ac97_data;
+
+static struct resource ac97_resources[] = {
+	[0] = {
+		.start	= AT91SAM9RL_BASE_AC97C,
+		.end	= AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9RL_ID_AC97C,
+		.end	= AT91SAM9RL_ID_AC97C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91sam9rl_ac97_device = {
+	.name		= "atmel_ac97c",
+	.id		= 0,
+	.dev		= {
+				.dma_mask		= &ac97_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &ac97_data,
+	},
+	.resource	= ac97_resources,
+	.num_resources	= ARRAY_SIZE(ac97_resources),
+};
+
+void __init at91_add_device_ac97(struct ac97c_platform_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_A_periph(AT91_PIN_PD1, 0);	/* AC97FS */
+	at91_set_A_periph(AT91_PIN_PD2, 0);	/* AC97CK */
+	at91_set_A_periph(AT91_PIN_PD3, 0);	/* AC97TX */
+	at91_set_A_periph(AT91_PIN_PD4, 0);	/* AC97RX */
+
+	/* reset */
+	if (data->reset_pin)
+		at91_set_gpio_output(data->reset_pin, 0);
+
+	ac97_data = *data;
+	platform_device_register(&at91sam9rl_ac97_device);
+}
+#else
+void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  LCD Controller
  * -------------------------------------------------------------------- */
 
@@ -1103,6 +1204,7 @@
  */
 static int __init at91_add_standard_devices(void)
 {
+	at91_add_device_hdmac();
 	at91_add_device_rtc();
 	at91_add_device_rtt();
 	at91_add_device_watchdog();
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 83a1a0f..d694087 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -364,7 +364,7 @@
 /*
  * AC97
  */
-static struct atmel_ac97_data cap9adk_ac97_data = {
+static struct ac97c_platform_data cap9adk_ac97_data = {
 //	.reset_pin	= ... not connected
 };
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 8c0b71c..7c1e382 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -340,7 +340,7 @@
 /*
  * AC97
  */
-static struct atmel_ac97_data neocore926_ac97_data = {
+static struct ac97c_platform_data neocore926_ac97_data = {
 	.reset_pin	= AT91_PIN_PA13,
 };
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index b8558ea..64c3843 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -311,6 +311,14 @@
 
 
 /*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
+/*
  * LEDs ... these could all be PWM-driven, for variable brightness
  */
 static struct gpio_led ek_leds[] = {
@@ -372,6 +380,8 @@
 	at91_add_device_lcdc(&ek_lcdc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 94ffb5c..bd28e98 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -211,6 +211,14 @@
 
 
 /*
+ * AC97
+ * reset_pin is not connected: NRST
+ */
+static struct ac97c_platform_data ek_ac97_data = {
+};
+
+
+/*
  * LEDs
  */
 static struct gpio_led ek_leds[] = {
@@ -299,6 +307,8 @@
 	at91_add_device_mmc(0, &ek_mmc_data);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* AC97 */
+	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
 	at91_add_device_tsadcc();
 	/* LEDs */
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 492c649..4b4f692 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -31,7 +31,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <linux/amba/bus.h>
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
 #include <asm/clkdev.h>
@@ -45,7 +44,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <cfg_global.h>
 
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index a1d5e7d..52dd804 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2a318eb..3f35293 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -19,6 +19,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/kmi.h>
 #include <linux/amba/clcd.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
 
@@ -400,7 +400,7 @@
 	return status & 8;
 }
 
-static struct mmc_platform_data mmc_data = {
+static struct mmci_platform_data mmc_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index f1d72b2..901cc20 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -486,7 +486,7 @@
 	return ret;
 }
 
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
 }
diff --git a/arch/arm/mach-iop32x/include/mach/iop32x.h b/arch/arm/mach-iop32x/include/mach/iop32x.h
index abd9eb4..941f363 100644
--- a/arch/arm/mach-iop32x/include/mach/iop32x.h
+++ b/arch/arm/mach-iop32x/include/mach/iop32x.h
@@ -31,7 +31,5 @@
 #define IOP32X_MAX_RAM_SIZE            0x40000000UL
 #define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif
diff --git a/arch/arm/mach-iop33x/include/mach/iop33x.h b/arch/arm/mach-iop33x/include/mach/iop33x.h
index 2456731..a89c0a2 100644
--- a/arch/arm/mach-iop33x/include/mach/iop33x.h
+++ b/arch/arm/mach-iop33x/include/mach/iop33x.h
@@ -36,8 +36,6 @@
 #define IOP33X_MAX_RAM_SIZE		0x80000000UL
 #define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
 
 
 #endif
diff --git a/arch/arm/mach-ns9xxx/clock.c b/arch/arm/mach-ns9xxx/clock.c
index 44ed20d..cf81cbc 100644
--- a/arch/arm/mach-ns9xxx/clock.c
+++ b/arch/arm/mach-ns9xxx/clock.c
@@ -195,7 +195,7 @@
 	return single_open(file, clk_debugfs_show, NULL);
 }
 
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
 	.open = clk_debugfs_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index 4ef26fa..e5dcdf7 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -38,7 +38,7 @@
 	{ .jtag_id = 0xb574, .die_rev = 0x2, .omap_id = 0x03310315, .type = 0x03100000},
 	{ .jtag_id = 0x355f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300100},
 	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x07300300},
-	{ .jtag_id = 0xb55f, .die_rev = 0x0, .omap_id = 0x03320500, .type = 0x08500000},
+	{ .jtag_id = 0xb62c, .die_rev = 0x1, .omap_id = 0x03320500, .type = 0x08500000},
 	{ .jtag_id = 0xb470, .die_rev = 0x0, .omap_id = 0x03310100, .type = 0x15100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x0, .omap_id = 0x03320000, .type = 0x16100000},
 	{ .jtag_id = 0xb576, .die_rev = 0x2, .omap_id = 0x03320100, .type = 0x16110000},
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd57ec7..efaf053 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -54,7 +54,7 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static int sdp3430_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -88,11 +88,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data sdp3430_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 5,
 	.cols		= 6,
-	.keymap		= sdp3430_keymap,
-	.keymapsize	= ARRAY_SIZE(sdp3430_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ec6854c..d110a7f 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -80,7 +80,7 @@
 	},
 };
 
-static int ldp_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_1),
 	KEY(1, 0, KEY_2),
 	KEY(2, 0, KEY_3),
@@ -101,11 +101,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 6,
 	.cols		= 6,
-	.keymap		= ldp_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(ldp_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 500c995..70df6b4 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -139,8 +139,13 @@
 static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_cfg_reg(AG9_34XX_GPIO23);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_cfg_reg(AH8_34XX_GPIO29);
+	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(AH8_34XX_GPIO29);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index d50b9be..e4ec0c5 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -159,7 +159,7 @@
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
-static int omap3evm_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
 	KEY(0, 2, KEY_A),
@@ -178,11 +178,15 @@
 	KEY(3, 3, KEY_P)
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data omap3evm_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 4,
 	.cols		= 4,
-	.keymap		= omap3evm_keymap,
-	.keymapsize	= ARRAY_SIZE(omap3evm_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index b43f6e3..7f6bf87 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -133,7 +133,7 @@
 	omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
 }
 
-static int pandora_keypad_map[] = {
+static int board_keymap[] = {
 	/* col, row, code */
 	KEY(0, 0, KEY_9),
 	KEY(0, 1, KEY_0),
@@ -180,11 +180,15 @@
 	KEY(5, 2, KEY_FN),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data pandora_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 6,
-	.keymap		= pandora_keypad_map,
-	.keymapsize	= ARRAY_SIZE(pandora_keypad_map),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e6e8290..b45ad31 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -36,7 +36,7 @@
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
-static int rx51_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_W),
 	KEY(0, 2, KEY_E),
@@ -83,11 +83,15 @@
 	KEY(0xff, 5, KEY_F10),
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data rx51_kp_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= rx51_keymap,
-	.keymapsize	= ARRAY_SIZE(rx51_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 324009e..b7b3220 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -27,7 +27,7 @@
 #include "mmc-twl4030.h"
 
 /* Zoom2 has Qwerty keyboard*/
-static int zoom2_twl4030_keymap[] = {
+static int board_keymap[] = {
 	KEY(0, 0, KEY_E),
 	KEY(1, 0, KEY_R),
 	KEY(2, 0, KEY_T),
@@ -82,11 +82,15 @@
 	0
 };
 
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
 static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
 	.rows		= 8,
 	.cols		= 8,
-	.keymap		= zoom2_twl4030_keymap,
-	.keymapsize	= ARRAY_SIZE(zoom2_twl4030_keymap),
 	.rep		= 1,
 };
 
diff --git a/arch/arm/mach-omap2/cm4xxx.c b/arch/arm/mach-omap2/cm4xxx.c
index e4ebd6d..4af76bb 100644
--- a/arch/arm/mach-omap2/cm4xxx.c
+++ b/arch/arm/mach-omap2/cm4xxx.c
@@ -22,7 +22,6 @@
 #include <asm/atomic.h>
 
 #include "cm.h"
-#include "cm-regbits-4xxx.h"
 
 /* XXX move this to cm.h */
 /* MAX_MODULE_READY_TIME: max milliseconds for module to leave idle */
@@ -50,19 +49,7 @@
  */
 int omap4_cm_wait_idlest_ready(u32 prcm_mod, u8 prcm_dev_offs)
 {
-	int i = 0;
-	u8 cm_id;
-	u16 prcm_mod_offs;
-	u32 mask = OMAP4_PRCM_CM_CLKCTRL_IDLEST_MASK;
-
-	cm_id = prcm_mod >> OMAP4_PRCM_MOD_CM_ID_SHIFT;
-	prcm_mod_offs = prcm_mod & OMAP4_PRCM_MOD_OFFS_MASK;
-
-	while (((omap4_cm_read_mod_reg(cm_id, prcm_mod_offs, prcm_dev_offs,
-				       OMAP4_CM_CLKCTRL_DREG) & mask) != 0) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
-
-	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+	/* FIXME: Add clock manager related code */
+	return 0;
 }
 
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index bcfcfc7..faf7a1e 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -355,29 +355,60 @@
 };
 #endif
 
-static void omap_init_mcspi(void)
+#ifdef CONFIG_ARCH_OMAP4
+static inline void omap4_mcspi_fixup(void)
 {
-	if (cpu_is_omap44xx()) {
-		omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
-		omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
-		omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
-		omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
-		omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
-		omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
-		omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
-		omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
-	}
-	platform_device_register(&omap2_mcspi1);
-	platform_device_register(&omap2_mcspi2);
+	omap2_mcspi1_resources[0].start	= OMAP4_MCSPI1_BASE;
+	omap2_mcspi1_resources[0].end	= OMAP4_MCSPI1_BASE + 0xff;
+	omap2_mcspi2_resources[0].start	= OMAP4_MCSPI2_BASE;
+	omap2_mcspi2_resources[0].end	= OMAP4_MCSPI2_BASE + 0xff;
+	omap2_mcspi3_resources[0].start	= OMAP4_MCSPI3_BASE;
+	omap2_mcspi3_resources[0].end	= OMAP4_MCSPI3_BASE + 0xff;
+	omap2_mcspi4_resources[0].start	= OMAP4_MCSPI4_BASE;
+	omap2_mcspi4_resources[0].end	= OMAP4_MCSPI4_BASE + 0xff;
+}
+#else
+static inline void omap4_mcspi_fixup(void)
+{
+}
+#endif
+
 #if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3) || \
 	defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi3);
+static inline void omap2_mcspi3_init(void)
+{
+	platform_device_register(&omap2_mcspi3);
+}
+#else
+static inline void omap2_mcspi3_init(void)
+{
+}
 #endif
+
 #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
-	if (cpu_is_omap343x() || cpu_is_omap44xx())
-		platform_device_register(&omap2_mcspi4);
+static inline void omap2_mcspi4_init(void)
+{
+	platform_device_register(&omap2_mcspi4);
+}
+#else
+static inline void omap2_mcspi4_init(void)
+{
+}
 #endif
+
+static void omap_init_mcspi(void)
+{
+	if (cpu_is_omap44xx())
+		omap4_mcspi_fixup();
+
+	platform_device_register(&omap2_mcspi1);
+	platform_device_register(&omap2_mcspi2);
+
+	if (cpu_is_omap2430() || cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi3_init();
+
+	if (cpu_is_omap343x() || cpu_is_omap44xx())
+		omap2_mcspi4_init();
 }
 
 #else
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 7574b6f..e3a3bad 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -294,10 +294,10 @@
 	else if (cpu_is_omap34xx())
 		hwmods = omap34xx_hwmods;
 
-	omap_hwmod_init(hwmods);
-	omap2_mux_init();
 #ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
 	/* The OPP tables have to be registered before a clk init */
+	omap_hwmod_init(hwmods);
+	omap2_mux_init();
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 2d9b5cc..4a0e1cd 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -79,7 +79,7 @@
 		l = iommu_read_reg(obj, MMU_SYSSTATUS);
 		if (l & MMU_SYS_RESETDONE)
 			break;
-	} while (time_after(jiffies, timeout));
+	} while (!time_after(jiffies, timeout));
 
 	if (!(l & MMU_SYS_RESETDONE)) {
 		dev_err(obj->dev, "can't take mmu out of reset\n");
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index 6f71f37..c035ad3 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -30,6 +30,14 @@
 #define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
 #define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
 
+/* SYSCONFIG: register bit definition */
+#define AUTOIDLE	(1 << 0)
+#define SOFTRESET	(1 << 1)
+#define SMARTIDLE	(2 << 3)
+
+/* SYSSTATUS: register bit definition */
+#define RESETDONE	(1 << 0)
+
 #define MBOX_REG_SIZE			0x120
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
 
@@ -69,21 +77,33 @@
 /* Mailbox H/W preparations */
 static int omap2_mbox_startup(struct omap_mbox *mbox)
 {
-	unsigned int l;
+	u32 l;
+	unsigned long timeout;
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		printk("Could not get mailboxes_ick\n");
+		pr_err("Can't get mailboxes_ick\n");
 		return -ENODEV;
 	}
 	clk_enable(mbox_ick_handle);
 
+	mbox_write_reg(SOFTRESET, MAILBOX_SYSCONFIG);
+	timeout = jiffies + msecs_to_jiffies(20);
+	do {
+		l = mbox_read_reg(MAILBOX_SYSSTATUS);
+		if (l & RESETDONE)
+			break;
+	} while (!time_after(jiffies, timeout));
+
+	if (!(l & RESETDONE)) {
+		pr_err("Can't take mmu out of reset\n");
+		return -ENODEV;
+	}
+
 	l = mbox_read_reg(MAILBOX_REVISION);
 	pr_info("omap mailbox rev %d.%d\n", (l & 0xf0) >> 4, (l & 0x0f));
 
-	/* set smart-idle & autoidle */
-	l = mbox_read_reg(MAILBOX_SYSCONFIG);
-	l |= 0x00000011;
+	l = SMARTIDLE | AUTOIDLE;
 	mbox_write_reg(l, MAILBOX_SYSCONFIG);
 
 	omap2_mbox_enable_irq(mbox, IRQ_RX);
@@ -156,6 +176,9 @@
 	u32 bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
 
 	mbox_write_reg(bit, p->irqstatus);
+
+	/* Flush posted write for irq status to avoid spurious interrupts */
+	mbox_read_reg(p->irqstatus);
 }
 
 static int omap2_mbox_is_irq(struct omap_mbox *mbox,
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 2daa595..b5fac32 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -460,6 +460,8 @@
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
+MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
 MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
@@ -472,6 +474,8 @@
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
+MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
+		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
 		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
 MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a529c7..ae21868 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -110,7 +110,7 @@
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
 #ifdef CONFIG_ARCH_OMAP4
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -126,7 +126,7 @@
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= IO_ADDRESS(OMAP_UART4_BASE),
+		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -579,7 +579,7 @@
 	{
 		.pdev = {
 			.name			= "serial8250",
-			.id			= 3
+			.id			= 3,
 			.dev			= {
 				.platform_data	= serial_platform_data3,
 			},
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 89c992b..a6f8eab 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -21,6 +21,11 @@
 
 config CPU_PXA935
 	bool "PXA935 (codename Tavor-P65)"
+	select CPU_PXA930
+
+config CPU_PXA950
+	bool "PXA950 (codename Tavor-PV2)"
+	select CPU_PXA930
 
 endmenu
 
@@ -79,6 +84,12 @@
 	bool "Nec Mobilepro 900/c"
 	select PXA25x
 
+config MACH_BALLOON3
+	bool "Balloon 3 board"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
 	select PXA25x
@@ -371,6 +382,15 @@
 	  Say Y here if you intend to run this kernel on a Palm Tungsten|E2
 	  handheld computer.
 
+config MACH_PALMTC
+	bool "Palm Tungsten|C"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA25x
+	help
+	  Say Y here if you intend to run this kernel on a Palm Tungsten|C
+	  handheld computer.
+
 config MACH_PALMT5
 	bool "Palm Tungsten|T5"
 	default y
@@ -458,6 +478,7 @@
 	select PXA27x
 	select IWMMXT
 	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_EZX_A780
 	bool "Motorola EZX A780"
@@ -489,6 +510,21 @@
 	default y
 	depends on PXA_EZX
 
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
+	help
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
+
 endmenu
 
 config PXA25x
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index d4c6122..f10e152 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -31,6 +31,7 @@
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
 obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
@@ -58,6 +59,7 @@
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
 obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
 obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
 obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
 obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
@@ -78,6 +80,8 @@
 obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
 obj-$(CONFIG_PXA_EZX)           += ezx.o
 
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
+
 obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
 obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
 obj-$(CONFIG_MACH_CSB726)	+= csb726.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
new file mode 100644
index 0000000..f23138b
--- /dev/null
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -0,0 +1,361 @@
+/*
+ *  linux/arch/arm/mach-pxa/balloon3.c
+ *
+ *  Support for Balloonboard.org Balloon3 board.
+ *
+ *  Author:	Nick Bane, Wookey, Jonathan McDowell
+ *  Created:	June, 2006
+ *  Copyright:	Toby Churchill Ltd
+ *  Derived from mainstone.c, by Nico Pitre
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/sched.h>
+#include <linux/bitops.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/types.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/flash.h>
+
+#include <mach/pxa27x.h>
+#include <mach/balloon3.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include <plat/i2c.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long balloon3_irq_enabled;
+
+static unsigned long balloon3_features_present =
+		(1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) |
+		(1 << BALLOON3_FEATURE_AUDIO) |
+		(1 << BALLOON3_FEATURE_TOPPOLY);
+
+int balloon3_has(enum balloon3_features feature)
+{
+	return (balloon3_features_present & (1 << feature)) ? 1 : 0;
+}
+EXPORT_SYMBOL_GPL(balloon3_has);
+
+int __init parse_balloon3_features(char *arg)
+{
+	if (!arg)
+		return 0;
+
+	return strict_strtoul(arg, 0, &balloon3_features_present);
+}
+early_param("balloon3_features", parse_balloon3_features);
+
+static void balloon3_mask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled &= ~(1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static void balloon3_unmask_irq(unsigned int irq)
+{
+	int balloon3_irq = (irq - BALLOON3_IRQ(0));
+	balloon3_irq_enabled |= (1 << balloon3_irq);
+	__raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG);
+}
+
+static struct irq_chip balloon3_irq_chip = {
+	.name		= "FPGA",
+	.ack		= balloon3_mask_irq,
+	.mask		= balloon3_mask_irq,
+	.unmask		= balloon3_unmask_irq,
+};
+
+static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+					balloon3_irq_enabled;
+
+	do {
+		/* clear useless edge notification */
+		if (desc->chip->ack)
+			desc->chip->ack(BALLOON3_AUX_NIRQ);
+		while (pending) {
+			irq = BALLOON3_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+			pending &= pending - 1;
+		}
+		pending = __raw_readl(BALLOON3_INT_CONTROL_REG) &
+				balloon3_irq_enabled;
+	} while (pending);
+}
+
+static void __init balloon3_init_irq(void)
+{
+	int irq;
+
+	pxa27x_init_irq();
+	/* setup extra Balloon3 irqs */
+	for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) {
+		set_irq_chip(irq, &balloon3_irq_chip);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler);
+	set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING);
+
+	pr_debug("%s: chained handler installed - irq %d automatically "
+		"enabled\n", __func__, BALLOON3_AUX_NIRQ);
+}
+
+static void balloon3_backlight_power(int on)
+{
+	pr_debug("%s: power is %s\n", __func__, on ? "on" : "off");
+	gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on);
+}
+
+static unsigned long balloon3_lcd_pin_config[] = {
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	GPIO99_GPIO,		/* Backlight */
+};
+
+static struct pxafb_mode_info balloon3_lcd_modes[] = {
+	{
+		.pixclock		= 38000,
+		.xres			= 480,
+		.yres			= 640,
+		.bpp			= 16,
+		.hsync_len		= 8,
+		.left_margin		= 8,
+		.right_margin		= 8,
+		.vsync_len		= 2,
+		.upper_margin		= 4,
+		.lower_margin		= 5,
+		.sync			= 0,
+	},
+};
+
+static struct pxafb_mach_info balloon3_pxafb_info = {
+	.modes			= balloon3_lcd_modes,
+	.num_modes		= ARRAY_SIZE(balloon3_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_backlight_power	= balloon3_backlight_power,
+};
+
+static unsigned long balloon3_mmc_pin_config[] = {
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+};
+
+static void balloon3_mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask) {
+		pr_debug("%s: on\n", __func__);
+		/* FIXME something to prod here? */
+	} else {
+		pr_debug("%s: off\n", __func__);
+		/* FIXME something to prod here? */
+	}
+}
+
+static struct pxamci_platform_data balloon3_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 	= balloon3_mci_setpower,
+};
+
+static int balloon3_udc_is_connected(void)
+{
+	pr_debug("%s: udc connected\n", __func__);
+	return 1;
+}
+
+static void balloon3_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_CONNECT:
+		UP2OCR |= (UP2OCR_DPPUE + UP2OCR_DPPUBE);
+		pr_debug("%s: connect\n", __func__);
+		break;
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		UP2OCR &= ~UP2OCR_DPPUE;
+		pr_debug("%s: disconnect\n", __func__);
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info balloon3_udc_info = {
+	.udc_is_connected = balloon3_udc_is_connected,
+	.udc_command      = balloon3_udc_command,
+};
+
+static struct pxaficp_platform_data balloon3_ficp_platform_data = {
+	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+};
+
+static unsigned long balloon3_ohci_pin_config[] = {
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+};
+
+static struct pxaohci_platform_data balloon3_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static unsigned long balloon3_pin_config[] __initdata = {
+	/* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* Wakeup GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* NAND & IDLE LED GPIOs */
+	GPIO9_GPIO,
+	GPIO10_GPIO,
+};
+
+static struct gpio_led balloon3_gpio_leds[] = {
+	{
+		.name			= "balloon3:green:idle",
+		.default_trigger	= "heartbeat",
+		.gpio			= BALLOON3_GPIO_LED_IDLE,
+		.active_low		= 1,
+	},
+	{
+		.name			= "balloon3:green:nand",
+		.default_trigger	= "nand-disk",
+		.gpio			= BALLOON3_GPIO_LED_NAND,
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data balloon3_gpio_leds_platform_data = {
+	.leds		= balloon3_gpio_leds,
+	.num_leds	= ARRAY_SIZE(balloon3_gpio_leds),
+};
+
+static struct platform_device balloon3led_device = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &balloon3_gpio_leds_platform_data,
+	},
+};
+
+static void __init balloon3_init(void)
+{
+	pr_info("Initialising Balloon3\n");
+
+	/* system bus arbiter setting
+	 * - Core_Park
+	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
+	 */
+	ARB_CNTRL = ARB_CORE_PARK | 0x234;
+
+	pxa_set_i2c_info(NULL);
+	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
+		pxa_set_ac97_info(NULL);
+
+	if (balloon3_has(BALLOON3_FEATURE_TOPPOLY)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config));
+		gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT,
+			"LCD Backlight Power");
+		gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1);
+		set_pxa_fb_info(&balloon3_pxafb_info);
+	}
+
+	if (balloon3_has(BALLOON3_FEATURE_MMC)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config));
+		pxa_set_mci_info(&balloon3_mci_platform_data);
+	}
+	pxa_set_ficp_info(&balloon3_ficp_platform_data);
+	if (balloon3_has(BALLOON3_FEATURE_OHCI)) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ohci_pin_config));
+		pxa_set_ohci_info(&balloon3_ohci_platform_data);
+	}
+	pxa_set_udc_info(&balloon3_udc_info);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config));
+
+	platform_device_register(&balloon3led_device);
+}
+
+static struct map_desc balloon3_io_desc[] __initdata = {
+	{	/* CPLD/FPGA */
+		.virtual	=  BALLOON3_FPGA_VIRT,
+		.pfn		= __phys_to_pfn(BALLOON3_FPGA_PHYS),
+		.length		= BALLOON3_FPGA_LENGTH,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init balloon3_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc));
+}
+
+MACHINE_START(BALLOON3, "Balloon3")
+	/* Maintainer: Nick Bane. */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= balloon3_map_io,
+	.init_irq	= balloon3_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= balloon3_init,
+	.boot_params	= PHYS_OFFSET + 0x100,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index 5599bce..978a366 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -12,7 +12,6 @@
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
-	struct clk		*other;
 };
 
 #define INIT_CLKREG(_clk,_devname,_conname)		\
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 1d2cec2..eea78b6 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -13,13 +13,18 @@
 #include <linux/sysdev.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
+#include <linux/delay.h>
 
 #include <linux/rtc-v3020.h>
 #include <video/mbxfb.h>
 
+#include <linux/spi/spi.h>
+#include <linux/spi/libertas_spi.h>
+
 #include <mach/pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/mmc.h>
+#include <mach/pxa2xx_spi.h>
 
 #include "generic.h"
 
@@ -34,6 +39,10 @@
 /* MMC power enable */
 #define GPIO105_MMC_POWER	(105)
 
+/* WLAN GPIOS */
+#define GPIO19_WLAN_STRAP	(19)
+#define GPIO102_WLAN_RST	(102)
+
 static unsigned long cmx270_pin_config[] = {
 	/* AC'97 */
 	GPIO28_AC97_BITCLK,
@@ -94,8 +103,8 @@
 	GPIO26_SSP1_RXD,
 
 	/* SSP2 */
-	GPIO19_SSP2_SCLK,
-	GPIO14_SSP2_SFRM,
+	GPIO19_GPIO,	/* SSP2 clock is used as GPIO for Libertas pin-strap */
+	GPIO14_GPIO,
 	GPIO87_SSP2_TXD,
 	GPIO88_SSP2_RXD,
 
@@ -123,6 +132,7 @@
 	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
 	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
 	GPIO53_GPIO,				/* PC card reset */
+	GPIO102_GPIO,				/* WLAN reset */
 
 	/* NAND controls */
 	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
@@ -131,6 +141,7 @@
 	/* interrupts */
 	GPIO10_GPIO,	/* DM9000 interrupt */
 	GPIO83_GPIO,	/* MMC card detect */
+	GPIO95_GPIO,	/* WLAN interrupt */
 };
 
 /* V3020 RTC */
@@ -271,56 +282,12 @@
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-static int cmx270_mci_init(struct device *dev,
-			   irq_handler_t cmx270_detect_int,
-			   void *data)
-{
-	int err;
-
-	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
-	if (err) {
-		dev_warn(dev, "power gpio unavailable\n");
-		return err;
-	}
-
-	gpio_direction_output(GPIO105_MMC_POWER, 0);
-
-	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		gpio_free(GPIO105_MMC_POWER);
-		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
-			" request MMC card detect IRQ\n");
-	}
-
-	return err;
-}
-
-static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask) {
-		dev_dbg(dev, "power on\n");
-		gpio_set_value(GPIO105_MMC_POWER, 0);
-	} else {
-		gpio_set_value(GPIO105_MMC_POWER, 1);
-		dev_dbg(dev, "power off\n");
-	}
-}
-
-static void cmx270_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CMX270_MMC_IRQ, data);
-	gpio_free(GPIO105_MMC_POWER);
-}
-
 static struct pxamci_platform_data cmx270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cmx270_mci_init,
-	.setpower 	= cmx270_mci_setpower,
-	.exit		= cmx270_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO83_MMC_IRQ,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO105_MMC_POWER,
+	.gpio_power_invert	= 1,
 };
 
 static void __init cmx270_init_mmc(void)
@@ -331,6 +298,100 @@
 static inline void cmx270_init_mmc(void) {}
 #endif
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master cm_x270_spi_info = {
+	.num_chipselect	= 1,
+	.enable_dma	= 1,
+};
+
+static struct pxa2xx_spi_chip cm_x270_libertas_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.timeout	= 1000,
+	.gpio_cs	= 14,
+};
+
+static unsigned long cm_x270_libertas_pin_config[] = {
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_GPIO,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+};
+
+static int cm_x270_libertas_setup(struct spi_device *spi)
+{
+	int err = gpio_request(GPIO19_WLAN_STRAP, "WLAN STRAP");
+	if (err)
+		return err;
+
+	err = gpio_request(GPIO102_WLAN_RST, "WLAN RST");
+	if (err)
+		goto err_free_strap;
+
+	err = gpio_direction_output(GPIO102_WLAN_RST, 0);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	err = gpio_direction_output(GPIO19_WLAN_STRAP, 1);
+	if (err)
+		goto err_free_strap;
+	msleep(100);
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cm_x270_libertas_pin_config));
+
+	gpio_set_value(GPIO102_WLAN_RST, 1);
+	msleep(100);
+
+	spi->bits_per_word = 16;
+	spi_setup(spi);
+
+	return 0;
+
+err_free_strap:
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return err;
+}
+
+static int cm_x270_libertas_teardown(struct spi_device *spi)
+{
+	gpio_set_value(GPIO102_WLAN_RST, 0);
+	gpio_free(GPIO102_WLAN_RST);
+	gpio_free(GPIO19_WLAN_STRAP);
+
+	return 0;
+}
+
+struct libertas_spi_platform_data cm_x270_libertas_pdata = {
+	.use_dummy_writes	= 1,
+	.setup			= cm_x270_libertas_setup,
+	.teardown		= cm_x270_libertas_teardown,
+};
+
+static struct spi_board_info cm_x270_spi_devices[] __initdata = {
+	{
+		.modalias		= "libertas_spi",
+		.max_speed_hz		= 13000000,
+		.bus_num		= 2,
+		.irq			= gpio_to_irq(95),
+		.chip_select		= 0,
+		.controller_data	= &cm_x270_libertas_chip,
+		.platform_data		= &cm_x270_libertas_pdata,
+	},
+};
+
+static void __init cmx270_init_spi(void)
+{
+	pxa2xx_set_spi_info(2, &cm_x270_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(cm_x270_spi_devices));
+}
+#else
+static inline void cmx270_init_spi(void) {}
+#endif
+
 void __init cmx270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@@ -343,4 +404,5 @@
 	cmx270_init_mmc();
 	cmx270_init_ohci();
 	cmx270_init_2700G();
+	cmx270_init_spi();
 }
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 465da26..aac2cda 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -306,68 +306,21 @@
 }
 
 static struct pxamci_platform_data cm_x300_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci_init,
-	.exit		= cm_x300_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= cm_x300_mci_init,
+	.exit			= cm_x300_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
-static int cm_x300_mci2_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO85_MMC2_WP);
-}
-
-static int cm_x300_mci2_init(struct device *dev,
-			     irq_handler_t cm_x300_detect_int,
-			     void *data)
-{
-	int err;
-
-	/*
-	 * setup GPIO for CM-X300 MMC controller
-	 */
-	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(GPIO82_MMC2_IRQ);
-
-	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(GPIO85_MMC2_WP);
-
-	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(GPIO85_MMC2_WP);
-err_request_wp:
-	gpio_free(GPIO82_MMC2_IRQ);
-err_request_cd:
-	return err;
-}
-
-static void cm_x300_mci2_exit(struct device *dev, void *data)
-{
-	free_irq(CM_X300_MMC2_IRQ, data);
-	gpio_free(GPIO82_MMC2_IRQ);
-	gpio_free(GPIO85_MMC2_WP);
-}
-
 static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= cm_x300_mci2_init,
-	.exit		= cm_x300_mci2_exit,
-	.get_ro		= cm_x300_mci2_ro,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC2_IRQ,
+	.gpio_card_ro		= GPIO85_MMC2_WP,
+	.gpio_power		= -1,
 };
 
 static void __init cm_x300_init_mmc(void)
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 7c9c34c..37c239c 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -172,6 +172,7 @@
 {
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa300_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO39_GPIO));
 	colibri_pxa310_init_ac97();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index a18d37b..4945728 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -164,15 +164,48 @@
 static inline void colibri_pxa320_init_ac97(void) {}
 #endif
 
+/*
+ * The following configuration is verified to work with the Toradex Orchid
+ * carrier board
+ */
+static mfp_cfg_t colibri_pxa320_uart_pin_config[] __initdata = {
+	/* UART 1 configuration (may be set by bootloader) */
+	GPIO99_UART1_CTS,
+	GPIO104_UART1_RTS,
+	GPIO97_UART1_RXD,
+	GPIO98_UART1_TXD,
+	GPIO101_UART1_DTR,
+	GPIO103_UART1_DSR,
+	GPIO100_UART1_DCD,
+	GPIO102_UART1_RI,
+
+	/* UART 2 configuration */
+	GPIO109_UART2_CTS,
+	GPIO112_UART2_RTS,
+	GPIO110_UART2_RXD,
+	GPIO111_UART2_TXD,
+
+	/* UART 3 configuration */
+	GPIO30_UART3_RXD,
+	GPIO31_UART3_TXD,
+};
+
+static void __init colibri_pxa320_init_uart(void)
+{
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_uart_pin_config));
+}
+
 void __init colibri_pxa320_init(void)
 {
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
+	colibri_pxa3xx_init_nand();
 	colibri_pxa320_init_lcd();
 	colibri_pxa3xx_init_lcd(mfp_to_gpio(GPIO49_GPIO));
 	colibri_pxa320_init_ac97();
 	colibri_pxa3xx_init_mmc(ARRAY_AND_SIZE(colibri_pxa320_mmc_pin_config),
 				mfp_to_gpio(MFP_PIN_GPIO28));
+	colibri_pxa320_init_uart();
 }
 
 MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index ea34e34..efebaf4 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,6 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -95,10 +96,13 @@
 }
 
 static struct pxamci_platform_data colibri_pxa3xx_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init		= colibri_pxa3xx_mci_init,
-	.exit		= colibri_pxa3xx_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init			= colibri_pxa3xx_mci_init,
+	.exit			= colibri_pxa3xx_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 void __init colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin)
@@ -154,3 +158,43 @@
 }
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition colibri_nand_partitions[] = {
+	{
+		.name        = "bootloader",
+		.offset      = 0,
+		.size        = SZ_512K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	{
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data colibri_nand_info = {
+	.enable_arbiter	= 1,
+	.keep_config	= 1,
+	.parts		= colibri_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(colibri_nand_partitions),
+};
+
+void __init colibri_pxa3xx_init_nand(void)
+{
+	pxa3xx_set_nand_info(&colibri_nand_info);
+}
+#endif
+
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 5363e1a..b536b5a 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -29,6 +29,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
@@ -104,6 +105,28 @@
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 
+	/* GPIO Matrix Keypad */
+	GPIO66_GPIO,	/* column 0 */
+	GPIO67_GPIO,	/* column 1 */
+	GPIO68_GPIO,	/* column 2 */
+	GPIO69_GPIO,	/* column 3 */
+	GPIO70_GPIO,	/* column 4 */
+	GPIO71_GPIO,	/* column 5 */
+	GPIO72_GPIO,	/* column 6 */
+	GPIO73_GPIO,	/* column 7 */
+	GPIO74_GPIO,	/* column 8 */
+	GPIO75_GPIO,	/* column 9 */
+	GPIO76_GPIO,	/* column 10 */
+	GPIO77_GPIO,	/* column 11 */
+	GPIO58_GPIO,	/* row 0 */
+	GPIO59_GPIO,	/* row 1 */
+	GPIO60_GPIO,	/* row 2 */
+	GPIO61_GPIO,	/* row 3 */
+	GPIO62_GPIO,	/* row 4 */
+	GPIO63_GPIO,	/* row 5 */
+	GPIO64_GPIO,	/* row 6 */
+	GPIO65_GPIO,	/* row 7 */
+
 	/* GPIO */
 	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
 	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
@@ -267,9 +290,115 @@
 /*
  * Corgi Keyboard Device
  */
+#define CORGI_KEY_CALENDER	KEY_F1
+#define CORGI_KEY_ADDRESS	KEY_F2
+#define CORGI_KEY_FN		KEY_F3
+#define CORGI_KEY_CANCEL	KEY_F4
+#define CORGI_KEY_OFF		KEY_SUSPEND
+#define CORGI_KEY_EXOK		KEY_F5
+#define CORGI_KEY_EXCANCEL	KEY_F6
+#define CORGI_KEY_EXJOGDOWN	KEY_F7
+#define CORGI_KEY_EXJOGUP	KEY_F8
+#define CORGI_KEY_JAP1		KEY_LEFTCTRL
+#define CORGI_KEY_JAP2		KEY_LEFTALT
+#define CORGI_KEY_MAIL		KEY_F10
+#define CORGI_KEY_OK		KEY_F11
+#define CORGI_KEY_MENU		KEY_F12
+
+static const uint32_t corgikbd_keymap[] = {
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, CORGI_KEY_CALENDER),
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, CORGI_KEY_ADDRESS),
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 10, KEY_LEFTSHIFT),
+	KEY(5, 0, CORGI_KEY_MAIL),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 11, CORGI_KEY_FN),
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, CORGI_KEY_JAP1),
+	KEY(6, 2, CORGI_KEY_JAP2),
+	KEY(6, 3, CORGI_KEY_CANCEL),
+	KEY(6, 4, CORGI_KEY_OK),
+	KEY(6, 5, CORGI_KEY_MENU),
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+	KEY(7, 0, CORGI_KEY_OFF),
+	KEY(7, 1, CORGI_KEY_EXOK),
+	KEY(7, 2, CORGI_KEY_EXCANCEL),
+	KEY(7, 3, CORGI_KEY_EXJOGDOWN),
+	KEY(7, 4, CORGI_KEY_EXJOGUP),
+};
+
+static struct matrix_keymap_data corgikbd_keymap_data = {
+	.keymap		= corgikbd_keymap,
+	.keymap_size	= ARRAY_SIZE(corgikbd_keymap),
+};
+
+static const int corgikbd_row_gpios[] =
+		{ 58, 59, 60, 61, 62, 63, 64, 65 };
+static const int corgikbd_col_gpios[] =
+		{ 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77 };
+
+static struct matrix_keypad_platform_data corgikbd_pdata = {
+	.keymap_data		= &corgikbd_keymap_data,
+	.row_gpios		= corgikbd_row_gpios,
+	.col_gpios		= corgikbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(corgikbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(corgikbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device corgikbd_device = {
-	.name		= "corgi-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &corgikbd_pdata,
+	},
 };
 
 /*
@@ -307,111 +436,20 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data corgi_mci_platform_data;
-
-static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
-	if (err)
-		goto err_free_2;
-
-	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
-	gpio_direction_input(CORGI_GPIO_nSD_WP);
-	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
-
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-				IRQF_DISABLED | IRQF_TRIGGER_RISING |
-				IRQF_TRIGGER_FALLING,
-				"MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_3;
-	}
-	return 0;
-
-err_free_3:
-	gpio_free(CORGI_GPIO_SD_PWR);
-err_free_2:
-	gpio_free(CORGI_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
-static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
-}
-
-static int corgi_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CORGI_GPIO_nSD_WP);
-}
-
-static void corgi_mci_exit(struct device *dev, void *data)
-{
-	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(CORGI_GPIO_SD_PWR);
-	gpio_free(CORGI_GPIO_nSD_WP);
-	gpio_free(CORGI_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data corgi_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= corgi_mci_init,
-	.get_ro		= corgi_mci_get_ro,
-	.setpower 	= corgi_mci_setpower,
-	.exit		= corgi_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
+	.gpio_power		= CORGI_GPIO_SD_PWR,
 };
 
 
 /*
  * Irda
  */
-static void corgi_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int corgi_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void corgi_irda_shutdown(struct device *dev)
-{
-	gpio_free(CORGI_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
+	.gpio_pwdown		= CORGI_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= corgi_irda_transceiver_mode,
-	.startup		= corgi_irda_startup,
-	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -636,6 +674,7 @@
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 7d3e1b4..79141f8 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -130,61 +130,17 @@
 static int csb726_mci_init(struct device *dev,
 		irq_handler_t detect, void *data)
 {
-	int err;
-
 	csb726_mci_data.detect_delay = msecs_to_jiffies(500);
-
-	err = gpio_request(CSB726_GPIO_MMC_DETECT, "MMC detect");
-	if (err)
-		goto err_det_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_DETECT);
-	if (err)
-		goto err_det_dir;
-
-	err = gpio_request(CSB726_GPIO_MMC_RO, "MMC ro");
-	if (err)
-		goto err_ro_req;
-
-	err = gpio_direction_input(CSB726_GPIO_MMC_RO);
-	if (err)
-		goto err_ro_dir;
-
-	err = request_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), detect,
-			IRQF_DISABLED, "MMC card detect", data);
-	if (err)
-		goto err_irq;
-
 	return 0;
-
-err_irq:
-err_ro_dir:
-	gpio_free(CSB726_GPIO_MMC_RO);
-err_ro_req:
-err_det_dir:
-	gpio_free(CSB726_GPIO_MMC_DETECT);
-err_det_req:
-	return err;
-}
-
-static int csb726_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(CSB726_GPIO_MMC_RO);
-}
-
-static void csb726_mci_exit(struct device *dev, void *data)
-{
-	free_irq(gpio_to_irq(CSB726_GPIO_MMC_DETECT), data);
-	gpio_free(CSB726_GPIO_MMC_RO);
-	gpio_free(CSB726_GPIO_MMC_DETECT);
 }
 
 static struct pxamci_platform_data csb726_mci = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= csb726_mci_init,
-	.get_ro		= csb726_mci_get_ro,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init			= csb726_mci_init,
 	/* FIXME setpower */
-	.exit		= csb726_mci_exit,
+	.gpio_card_detect	= CSB726_GPIO_MMC_DETECT,
+	.gpio_card_ro		= CSB726_GPIO_MMC_RO,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data csb726_ohci_platform_data = {
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index ecc08f3..46fabe1c 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -935,6 +935,33 @@
 {
 	pxa_register_device(&pxa3xx_device_nand, info);
 }
+
+static struct resource pxa3xx_resources_gcu[] = {
+	{
+		.start	= 0x54000000,
+		.end	= 0x54000fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IRQ_GCU,
+		.end	= IRQ_GCU,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa3xx_gcu_dmamask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_gcu = {
+	.name		= "pxa3xx-gcu",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_gcu),
+	.resource	= pxa3xx_resources_gcu,
+	.dev		= {
+		.dma_mask = &pxa3xx_gcu_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+};
+
 #endif /* CONFIG_PXA3xx */
 
 /* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index ecc24a4..93817d9 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -35,4 +35,6 @@
 extern struct platform_device pxa3xx_device_nand;
 extern struct platform_device pxa3xx_device_i2c_power;
 
+extern struct platform_device pxa3xx_device_gcu;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index a36fc17..49acdfa 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -199,7 +199,6 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 1d00110..4052ece 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -200,7 +200,6 @@
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_udc_info(&e7xx_udc_mach_info);
 	pxa_set_ac97_info(NULL);
-	e7xx_irda_init();
 	pxa_set_ficp_info(&e7xx_ficp_platform_data);
 }
 
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9cd0946..aec7f42 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -646,13 +646,16 @@
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
-			  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
-			  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
-			  MMC_VDD_30_31|MMC_VDD_31_32,
-	.init 		= em_x270_mci_init,
-	.setpower 	= em_x270_mci_setpower,
-	.exit		= em_x270_mci_exit,
+	.ocr_mask		= MMC_VDD_20_21|MMC_VDD_21_22|MMC_VDD_22_23|
+				  MMC_VDD_24_25|MMC_VDD_25_26|MMC_VDD_26_27|
+				  MMC_VDD_27_28|MMC_VDD_28_29|MMC_VDD_29_30|
+				  MMC_VDD_30_31|MMC_VDD_31_32,
+	.init 			= em_x270_mci_init,
+	.setpower 		= em_x270_mci_setpower,
+	.exit			= em_x270_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init em_x270_init_mmc(void)
@@ -1022,22 +1025,32 @@
 	return 0;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0,
-	.power = em_x270_sensor_power,
-};
-
 static struct i2c_board_info em_x270_i2c_cam_info[] = {
 	{
 		I2C_BOARD_INFO("mt9m111", 0x48),
+	},
+};
+
+static struct soc_camera_link iclink = {
+	.bus_id		= 0,
+	.power		= em_x270_sensor_power,
+	.board_info	= &em_x270_i2c_cam_info[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
+static struct platform_device em_x270_camera = {
+	.name	= "soc-camera-pdrv",
+	.id	= -1,
+	.dev	= {
 		.platform_data = &iclink,
 	},
 };
 
 static void  __init em_x270_init_camera(void)
 {
-	i2c_register_board_info(0, ARRAY_AND_SIZE(em_x270_i2c_cam_info));
 	pxa_set_camera_info(&em_x270_camera_platform_data);
+	platform_device_register(&em_x270_camera);
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1103,6 +1116,7 @@
 REGULATOR_CONSUMER(ldo10, &pxa_device_mci.dev, "vcc sdio");
 REGULATOR_CONSUMER(ldo12, NULL, "vcc usb");
 REGULATOR_CONSUMER(ldo19, &em_x270_gprs_userspace_consumer.dev, "vcc gprs");
+REGULATOR_CONSUMER(buck2, NULL, "vcc_core");
 
 #define REGULATOR_INIT(_ldo, _min_uV, _max_uV, _ops_mask)		\
 	static struct regulator_init_data _ldo##_data = {		\
@@ -1125,6 +1139,7 @@
 	       REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_VOLTAGE);
 REGULATOR_INIT(ldo12, 3000000, 3000000, REGULATOR_CHANGE_STATUS);
 REGULATOR_INIT(ldo19, 3200000, 3200000, REGULATOR_CHANGE_STATUS);
+REGULATOR_INIT(buck2, 1000000, 1650000, REGULATOR_CHANGE_VOLTAGE);
 
 struct led_info em_x270_led_info = {
 	.name = "em-x270:orange",
@@ -1194,6 +1209,8 @@
 	DA9030_LDO(12),
 	DA9030_LDO(19),
 
+	DA9030_SUBDEV(regulator, BUCK2, &buck2_data),
+
 	DA9030_SUBDEV(led, LED_PC, &em_x270_led_info),
 	DA9030_SUBDEV(backlight, WLED, &em_x270_led_info),
 	DA9030_SUBDEV(battery, BAT, &em_x270_batterty_info),
@@ -1245,7 +1262,6 @@
 
 static void __init em_x270_module_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
 
 	mmc_cd = GPIO13_MMC_CD;
@@ -1257,7 +1273,6 @@
 
 static void __init em_x270_exeda_init(void)
 {
-	pr_info("%s\n", __func__);
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(exeda_pin_config));
 
 	mmc_cd = GPIO114_MMC_CD;
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index c60dadf..91417f0 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -47,44 +47,9 @@
 	.gpio_pullup_inverted = 1
 };
 
-static void e7xx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	if (mode & IR_OFF) {
-		gpio_set_value(GPIO_E7XX_IR_OFF, 1);
-		pxa2xx_transceiver_mode(dev, mode);
-	} else {
-		pxa2xx_transceiver_mode(dev, mode);
-		gpio_set_value(GPIO_E7XX_IR_OFF, 0);
-	}
-}
-
-int e7xx_irda_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_E7XX_IR_OFF, "IrDA power");
-	if (ret)
-		goto out;
-
-	ret = gpio_direction_output(GPIO_E7XX_IR_OFF, 0);
-	if (ret)
-		goto out;
-
-	e7xx_irda_transceiver_mode(NULL, IR_SIRMODE | IR_OFF);
-out:
-	return ret;
-}
-
-static void e7xx_irda_shutdown(struct device *dev)
-{
-	e7xx_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
-	gpio_free(GPIO_E7XX_IR_OFF);
-}
-
 struct pxaficp_platform_data e7xx_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = e7xx_irda_transceiver_mode,
-	.shutdown = e7xx_irda_shutdown,
+	.gpio_pwdown		= GPIO_E7XX_IR_OFF,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 int eseries_tmio_enable(struct platform_device *dev)
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index ca9912e..1708c01 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -88,7 +88,10 @@
 
 #ifdef CONFIG_MMC_PXA
 static struct pxamci_platform_data gumstix_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect 	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init gumstix_mmc_init(void)
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 81359d5..abff9e1 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -45,6 +45,7 @@
 #include <mach/irda.h>
 #include <mach/pxa2xx_spi.h>
 
+#include <video/platform_lcd.h>
 #include <video/w100fb.h>
 
 #include "devices.h"
@@ -174,14 +175,9 @@
  * IRDA
  */
 
-static void irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO105_HX4700_nIR_ON, mode & IR_OFF);
-}
-
 static struct pxaficp_platform_data ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = irda_transceiver_mode,
+	.gpio_pwdown		= GPIO105_HX4700_nIR_ON,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
@@ -368,8 +364,6 @@
  * LCD - Sony display connected to ATI Imageon w3220
  */
 
-static int lcd_power;
-
 static void sony_lcd_init(void)
 {
 	gpio_set_value(GPIO84_HX4700_LCD_SQN, 1);
@@ -410,35 +404,6 @@
 	gpio_set_value(GPIO110_HX4700_LCD_LVDD_3V3_ON, 0);
 }
 
-static int hx4700_lcd_set_power(struct lcd_device *ldev, int level)
-{
-	switch (level) {
-	case FB_BLANK_UNBLANK:
-		sony_lcd_init();
-		break;
-	case FB_BLANK_NORMAL:
-	case FB_BLANK_VSYNC_SUSPEND:
-	case FB_BLANK_HSYNC_SUSPEND:
-	case FB_BLANK_POWERDOWN:
-		sony_lcd_off();
-		break;
-	}
-	lcd_power = level;
-	return 0;
-}
-
-static int hx4700_lcd_get_power(struct lcd_device *lm)
-{
-	return lcd_power;
-}
-
-static struct lcd_ops hx4700_lcd_ops = {
-	.get_power = hx4700_lcd_get_power,
-	.set_power = hx4700_lcd_set_power,
-};
-
-static struct lcd_device *hx4700_lcd_device;
-
 #ifdef CONFIG_PM
 static void w3220_lcd_suspend(struct w100fb_par *wfb)
 {
@@ -573,6 +538,27 @@
 	.resource      = w3220_resources,
 };
 
+static void hx4700_lcd_set_power(struct plat_lcd_data *pd, unsigned int power)
+{
+	if (power)
+		sony_lcd_init();
+	else
+		sony_lcd_off();
+}
+
+static struct plat_lcd_data hx4700_lcd_data = {
+	.set_power = hx4700_lcd_set_power,
+};
+
+static struct platform_device hx4700_lcd = {
+	.name = "platform-lcd",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &hx4700_lcd_data,
+		.parent        = &w3220.dev,
+	},
+};
+
 /*
  * Backlight
  */
@@ -872,9 +858,6 @@
 	pxa2xx_set_spi_info(2, &pxa_ssp2_master_info);
 	spi_register_board_info(ARRAY_AND_SIZE(tsc2046_board_info));
 
-	hx4700_lcd_device = lcd_device_register("w100fb", NULL,
-					(void *)&w3220_info, &hx4700_lcd_ops);
-
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 0);
 	mdelay(10);
 	gpio_set_value(GPIO71_HX4700_ASIC3_nRESET, 1);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6243b5..b6486ef 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -168,7 +168,10 @@
 };
 
 static struct pxamci_platform_data idp_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init idp_init(void)
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 961807d..2a4945d 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -389,6 +389,9 @@
 static struct pxamci_platform_data imote2_mci_platform_data = {
 	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, /* default anyway */
 	.get_ro = imote2_mci_get_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power = -1,
 };
 
 static struct mtd_partition imote2flash_partitions[] = {
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
new file mode 100644
index 0000000..bfec09b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -0,0 +1,134 @@
+/*
+ *  linux/include/asm-arm/arch-pxa/balloon3.h
+ *
+ *  Authors:	Nick Bane and Wookey
+ *  Created:	Oct, 2005
+ *  Copyright:	Toby Churchill Ltd
+ *  Cribbed from mainstone.c, by Nicholas Pitre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_BALLOON3_H
+#define ASM_ARCH_BALLOON3_H
+
+enum balloon3_features {
+	BALLOON3_FEATURE_OHCI,
+	BALLOON3_FEATURE_MMC,
+	BALLOON3_FEATURE_CF,
+	BALLOON3_FEATURE_AUDIO,
+	BALLOON3_FEATURE_TOPPOLY,
+};
+
+#define BALLOON3_FPGA_PHYS	PXA_CS4_PHYS
+#define BALLOON3_FPGA_VIRT	(0xf1000000)	/* as per balloon2 */
+#define BALLOON3_FPGA_LENGTH	0x01000000
+
+/* FPGA/CPLD registers */
+#define BALLOON3_PCMCIA0_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+/* fixme - same for now */
+#define BALLOON3_PCMCIA1_REG		(BALLOON3_FPGA_VIRT + 0x00e00008)
+#define BALLOON3_NANDIO_IO_REG		(BALLOON3_FPGA_VIRT + 0x00e00000)
+/* fpga/cpld interrupt control register */
+#define BALLOON3_INT_CONTROL_REG	(BALLOON3_FPGA_VIRT + 0x00e0000C)
+#define BALLOON3_NANDIO_CTL2_REG 	(BALLOON3_FPGA_VIRT + 0x00e00010)
+#define BALLOON3_NANDIO_CTL_REG 	(BALLOON3_FPGA_VIRT + 0x00e00014)
+#define BALLOON3_VERSION_REG		(BALLOON3_FPGA_VIRT + 0x00e0001c)
+
+#define BALLOON3_SAMOSA_ADDR_REG	(BALLOON3_FPGA_VIRT + 0x00c00000)
+#define BALLOON3_SAMOSA_DATA_REG	(BALLOON3_FPGA_VIRT + 0x00c00004)
+#define BALLOON3_SAMOSA_STATUS_REG	(BALLOON3_FPGA_VIRT + 0x00c0001c)
+
+/* GPIOs for irqs */
+#define BALLOON3_GPIO_AUX_NIRQ		(94)
+#define BALLOON3_GPIO_CODEC_IRQ		(95)
+
+/* Timer and Idle LED locations */
+#define BALLOON3_GPIO_LED_NAND		(9)
+#define BALLOON3_GPIO_LED_IDLE		(10)
+
+/* backlight control */
+#define BALLOON3_GPIO_RUN_BACKLIGHT	(99)
+
+#define BALLOON3_GPIO_S0_CD		(105)
+
+/* FPGA Interrupt Mask/Acknowledge Register */
+#define BALLOON3_INT_S0_IRQ		(1 << 0)  /* PCMCIA 0 IRQ */
+#define BALLOON3_INT_S0_STSCHG		(1 << 1)  /* PCMCIA 0 status changed */
+
+/* CF Status Register */
+#define BALLOON3_PCMCIA_nIRQ		(1 << 0)  /* IRQ / ready signal */
+#define BALLOON3_PCMCIA_nSTSCHG_BVD1	(1 << 1)
+					/* VDD sense / card status changed */
+
+/* CF control register (write) */
+#define BALLOON3_PCMCIA_RESET		(1 << 0)   /* Card reset signal */
+#define BALLOON3_PCMCIA_ENABLE		(1 << 1)
+#define BALLOON3_PCMCIA_ADD_ENABLE	(1 << 2)
+
+/* CPLD (and FPGA) interface definitions */
+#define CPLD_LCD0_DATA_SET             0x00
+#define CPLD_LCD0_DATA_CLR             0x10
+#define CPLD_LCD0_COMMAND_SET          0x01
+#define CPLD_LCD0_COMMAND_CLR          0x11
+#define CPLD_LCD1_DATA_SET             0x02
+#define CPLD_LCD1_DATA_CLR             0x12
+#define CPLD_LCD1_COMMAND_SET          0x03
+#define CPLD_LCD1_COMMAND_CLR          0x13
+
+#define CPLD_MISC_SET                  0x07
+#define CPLD_MISC_CLR                  0x17
+#define CPLD_MISC_LOON_NRESET_BIT      0
+#define CPLD_MISC_LOON_UNSUSP_BIT      1
+#define CPLD_MISC_RUN_5V_BIT           2
+#define CPLD_MISC_CHG_D0_BIT           3
+#define CPLD_MISC_CHG_D1_BIT           4
+#define CPLD_MISC_DAC_NCS_BIT          5
+
+#define CPLD_LCD_SET                   0x08
+#define CPLD_LCD_CLR                   0x18
+#define CPLD_LCD_BACKLIGHT_EN_0_BIT    0
+#define CPLD_LCD_BACKLIGHT_EN_1_BIT    1
+#define CPLD_LCD_LED_RED_BIT           4
+#define CPLD_LCD_LED_GREEN_BIT         5
+#define CPLD_LCD_NRESET_BIT            7
+
+#define CPLD_LCD_RO_SET                0x09
+#define CPLD_LCD_RO_CLR                0x19
+#define CPLD_LCD_RO_LCD0_nWAIT_BIT     0
+#define CPLD_LCD_RO_LCD1_nWAIT_BIT     1
+
+#define CPLD_SERIAL_SET                0x0a
+#define CPLD_SERIAL_CLR                0x1a
+#define CPLD_SERIAL_GSM_RI_BIT         0
+#define CPLD_SERIAL_GSM_CTS_BIT        1
+#define CPLD_SERIAL_GSM_DTR_BIT        2
+#define CPLD_SERIAL_LPR_CTS_BIT        3
+#define CPLD_SERIAL_TC232_CTS_BIT      4
+#define CPLD_SERIAL_TC232_DSR_BIT      5
+
+#define CPLD_SROUTING_SET              0x0b
+#define CPLD_SROUTING_CLR              0x1b
+#define CPLD_SROUTING_MSP430_LPR       0
+#define CPLD_SROUTING_MSP430_TC232     1
+#define CPLD_SROUTING_MSP430_GSM       2
+#define CPLD_SROUTING_LOON_LPR         (0 << 4)
+#define CPLD_SROUTING_LOON_TC232       (1 << 4)
+#define CPLD_SROUTING_LOON_GSM         (2 << 4)
+
+#define CPLD_AROUTING_SET              0x0c
+#define CPLD_AROUTING_CLR              0x1c
+#define CPLD_AROUTING_MIC2PHONE_BIT    0
+#define CPLD_AROUTING_PHONE2INT_BIT    1
+#define CPLD_AROUTING_PHONE2EXT_BIT    2
+#define CPLD_AROUTING_LOONL2INT_BIT    3
+#define CPLD_AROUTING_LOONL2EXT_BIT    4
+#define CPLD_AROUTING_LOONR2PHONE_BIT  5
+#define CPLD_AROUTING_LOONR2INT_BIT    6
+#define CPLD_AROUTING_LOONR2EXT_BIT    7
+
+extern int balloon3_has(enum balloon3_features feature);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index a88d7ca..811743c 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -23,6 +23,12 @@
 extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data);
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+extern void colibri_pxa3xx_init_nand(void);
+#else
+static inline void colibri_pxa3xx_init_nand(void) {}
+#endif
+
 /* physical memory regions */
 #define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
 
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
index f6b4bf3..2418806 100644
--- a/arch/arm/mach-pxa/include/mach/entry-macro.S
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -24,34 +24,27 @@
 		mov	\tmp, \tmp, lsr #13
 		and	\tmp, \tmp, #0x7		@ Core G
 		cmp	\tmp, #1
-		bhi	1004f
+		bhi	1002f
 
+		@ Core Generation 1 (PXA25x)
 		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
 		add	\base, \base, #0x00d00000
 		ldr	\irqstat, [\base, #0]		@ ICIP
 		ldr	\irqnr, [\base, #4]		@ ICMR
-		b	1002f
 
-1004:
-		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
-		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
-		ands	\irqnr, \irqstat, \irqnr
-		beq	1003f
-		rsb	\irqstat, \irqnr, #0
-		and	\irqstat, \irqstat, \irqnr
-		clz	\irqnr, \irqstat
-		rsb	\irqnr, \irqnr, #31
-		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
-		b	1001f
-1003:
-		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
-		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
-1002:
 		ands	\irqnr, \irqstat, \irqnr
 		beq	1001f
 		rsb	\irqstat, \irqnr, #0
 		and	\irqstat, \irqstat, \irqnr
 		clz	\irqnr, \irqstat
 		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
+		b	1001f
+1002:
+		@ Core Generation 2 (PXA27x) or Core Generation 3 (PXA3xx)
+		mrc	p6, 0, \irqstat, c5, c0, 0	@ ICHP
+		tst	\irqstat, #0x80000000
+		beq	1001f
+		bic	\irqstat, \irqstat, #0x80000000
+		mov	\irqnr, \irqstat, lsr #16
 1001:
 		.endm
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index 16ab795..aa3d9f7 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -197,6 +197,16 @@
 #define __cpu_is_pxa935(id)	(0)
 #endif
 
+#ifdef CONFIG_CPU_PXA950
+#define __cpu_is_pxa950(id)                             \
+	({                                              \
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		id == 0x697;				\
+	 })
+#else
+#define __cpu_is_pxa950(id)	(0)
+#endif
+
 #define cpu_is_pxa210()					\
 	({						\
 		__cpu_is_pxa210(read_cpuid_id());	\
@@ -249,6 +259,13 @@
 		__cpu_is_pxa935(id);			\
 	 })
 
+#define cpu_is_pxa950()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa950(id);			\
+	 })
+
+
 /*
  * CPUID Core Generation Bit
  * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
index 0a50c3c..3cd41f7 100644
--- a/arch/arm/mach-pxa/include/mach/irda.h
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -12,6 +12,8 @@
 	void (*transceiver_mode)(struct device *dev, int mode);
 	int (*startup)(struct device *dev);
 	void (*shutdown)(struct device *dev);
+	int gpio_pwdown;		/* powerdown GPIO for the IrDA chip */
+	bool gpio_pwdown_inverted;	/* gpio_pwdown is inverted */
 };
 
 extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 6a1d959..3677a9a 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -68,9 +68,10 @@
 #ifdef CONFIG_PXA3xx
 #define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
 #define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_COMM_WDT	PXA_IRQ(35) 	/* Comm WDT interrupt */
 #define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
 #define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
-#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_GCU		PXA_IRQ(39)	/* Graphics Controller */
 #define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
 #define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
 #define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
@@ -81,8 +82,31 @@
 #define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
 #endif
 
-#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
-#define PXA_GPIO_IRQ_NUM	(128)
+#ifdef CONFIG_CPU_PXA935
+#define IRQ_U2O		PXA_IRQ(64)	/* USB OTG 2.0 Controller (PXA935) */
+#define IRQ_U2H		PXA_IRQ(65)	/* USB Host 2.0 Controller (PXA935) */
+
+#define IRQ_MMC3_PXA935	PXA_IRQ(72)	/* MMC3 Controller (PXA935) */
+#define IRQ_MMC4_PXA935	PXA_IRQ(73)	/* MMC4 Controller (PXA935) */
+#define IRQ_MMC5_PXA935	PXA_IRQ(74)	/* MMC5 Controller (PXA935) */
+
+#define IRQ_U2P		PXA_IRQ(93)	/* USB PHY D+/D- Lines (PXA935) */
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define IRQ_ENHROT	PXA_IRQ(37)	/* Enhanced Rotary (PXA930) */
+#define IRQ_ACIPC0	PXA_IRQ(5)
+#define IRQ_ACIPC1	PXA_IRQ(40)
+#define IRQ_ACIPC2	PXA_IRQ(19)
+#define IRQ_TRKBALL	PXA_IRQ(43)	/* Track Ball */
+#endif
+
+#ifdef CONFIG_CPU_PXA950
+#define IRQ_GC500	PXA_IRQ(70)	/* Graphics Controller (PXA950) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(96)
+#define PXA_GPIO_IRQ_NUM	(192)
 
 #define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
 #define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
@@ -105,6 +129,8 @@
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 70)
 #elif defined(CONFIG_MACH_ZYLONITE)
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 32)
+#elif defined(CONFIG_PXA_EZX)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 23)
 #else
 #define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
 #endif
@@ -237,6 +263,16 @@
 #define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
 #define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
 
+/* Balloon3 Interrupts */
+#define BALLOON3_IRQ(x)		(IRQ_BOARD_START + (x))
+
+#define BALLOON3_BP_CF_NRDY_IRQ	BALLOON3_IRQ(0)
+#define BALLOON3_BP_NSTSCHG_IRQ	BALLOON3_IRQ(1)
+
+#define BALLOON3_AUX_NIRQ	IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ	IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ	IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+
 /* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
 #define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
 #define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
index 4821850..271e249 100644
--- a/arch/arm/mach-pxa/include/mach/mfp.h
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -16,305 +16,6 @@
 #ifndef __ASM_ARCH_MFP_H
 #define __ASM_ARCH_MFP_H
 
-#define mfp_to_gpio(m)	((m) % 128)
-
-/* list of all the configurable MFP pins */
-enum {
-	MFP_PIN_INVALID = -1,
-
-	MFP_PIN_GPIO0 = 0,
-	MFP_PIN_GPIO1,
-	MFP_PIN_GPIO2,
-	MFP_PIN_GPIO3,
-	MFP_PIN_GPIO4,
-	MFP_PIN_GPIO5,
-	MFP_PIN_GPIO6,
-	MFP_PIN_GPIO7,
-	MFP_PIN_GPIO8,
-	MFP_PIN_GPIO9,
-	MFP_PIN_GPIO10,
-	MFP_PIN_GPIO11,
-	MFP_PIN_GPIO12,
-	MFP_PIN_GPIO13,
-	MFP_PIN_GPIO14,
-	MFP_PIN_GPIO15,
-	MFP_PIN_GPIO16,
-	MFP_PIN_GPIO17,
-	MFP_PIN_GPIO18,
-	MFP_PIN_GPIO19,
-	MFP_PIN_GPIO20,
-	MFP_PIN_GPIO21,
-	MFP_PIN_GPIO22,
-	MFP_PIN_GPIO23,
-	MFP_PIN_GPIO24,
-	MFP_PIN_GPIO25,
-	MFP_PIN_GPIO26,
-	MFP_PIN_GPIO27,
-	MFP_PIN_GPIO28,
-	MFP_PIN_GPIO29,
-	MFP_PIN_GPIO30,
-	MFP_PIN_GPIO31,
-	MFP_PIN_GPIO32,
-	MFP_PIN_GPIO33,
-	MFP_PIN_GPIO34,
-	MFP_PIN_GPIO35,
-	MFP_PIN_GPIO36,
-	MFP_PIN_GPIO37,
-	MFP_PIN_GPIO38,
-	MFP_PIN_GPIO39,
-	MFP_PIN_GPIO40,
-	MFP_PIN_GPIO41,
-	MFP_PIN_GPIO42,
-	MFP_PIN_GPIO43,
-	MFP_PIN_GPIO44,
-	MFP_PIN_GPIO45,
-	MFP_PIN_GPIO46,
-	MFP_PIN_GPIO47,
-	MFP_PIN_GPIO48,
-	MFP_PIN_GPIO49,
-	MFP_PIN_GPIO50,
-	MFP_PIN_GPIO51,
-	MFP_PIN_GPIO52,
-	MFP_PIN_GPIO53,
-	MFP_PIN_GPIO54,
-	MFP_PIN_GPIO55,
-	MFP_PIN_GPIO56,
-	MFP_PIN_GPIO57,
-	MFP_PIN_GPIO58,
-	MFP_PIN_GPIO59,
-	MFP_PIN_GPIO60,
-	MFP_PIN_GPIO61,
-	MFP_PIN_GPIO62,
-	MFP_PIN_GPIO63,
-	MFP_PIN_GPIO64,
-	MFP_PIN_GPIO65,
-	MFP_PIN_GPIO66,
-	MFP_PIN_GPIO67,
-	MFP_PIN_GPIO68,
-	MFP_PIN_GPIO69,
-	MFP_PIN_GPIO70,
-	MFP_PIN_GPIO71,
-	MFP_PIN_GPIO72,
-	MFP_PIN_GPIO73,
-	MFP_PIN_GPIO74,
-	MFP_PIN_GPIO75,
-	MFP_PIN_GPIO76,
-	MFP_PIN_GPIO77,
-	MFP_PIN_GPIO78,
-	MFP_PIN_GPIO79,
-	MFP_PIN_GPIO80,
-	MFP_PIN_GPIO81,
-	MFP_PIN_GPIO82,
-	MFP_PIN_GPIO83,
-	MFP_PIN_GPIO84,
-	MFP_PIN_GPIO85,
-	MFP_PIN_GPIO86,
-	MFP_PIN_GPIO87,
-	MFP_PIN_GPIO88,
-	MFP_PIN_GPIO89,
-	MFP_PIN_GPIO90,
-	MFP_PIN_GPIO91,
-	MFP_PIN_GPIO92,
-	MFP_PIN_GPIO93,
-	MFP_PIN_GPIO94,
-	MFP_PIN_GPIO95,
-	MFP_PIN_GPIO96,
-	MFP_PIN_GPIO97,
-	MFP_PIN_GPIO98,
-	MFP_PIN_GPIO99,
-	MFP_PIN_GPIO100,
-	MFP_PIN_GPIO101,
-	MFP_PIN_GPIO102,
-	MFP_PIN_GPIO103,
-	MFP_PIN_GPIO104,
-	MFP_PIN_GPIO105,
-	MFP_PIN_GPIO106,
-	MFP_PIN_GPIO107,
-	MFP_PIN_GPIO108,
-	MFP_PIN_GPIO109,
-	MFP_PIN_GPIO110,
-	MFP_PIN_GPIO111,
-	MFP_PIN_GPIO112,
-	MFP_PIN_GPIO113,
-	MFP_PIN_GPIO114,
-	MFP_PIN_GPIO115,
-	MFP_PIN_GPIO116,
-	MFP_PIN_GPIO117,
-	MFP_PIN_GPIO118,
-	MFP_PIN_GPIO119,
-	MFP_PIN_GPIO120,
-	MFP_PIN_GPIO121,
-	MFP_PIN_GPIO122,
-	MFP_PIN_GPIO123,
-	MFP_PIN_GPIO124,
-	MFP_PIN_GPIO125,
-	MFP_PIN_GPIO126,
-	MFP_PIN_GPIO127,
-	MFP_PIN_GPIO0_2,
-	MFP_PIN_GPIO1_2,
-	MFP_PIN_GPIO2_2,
-	MFP_PIN_GPIO3_2,
-	MFP_PIN_GPIO4_2,
-	MFP_PIN_GPIO5_2,
-	MFP_PIN_GPIO6_2,
-	MFP_PIN_GPIO7_2,
-	MFP_PIN_GPIO8_2,
-	MFP_PIN_GPIO9_2,
-	MFP_PIN_GPIO10_2,
-	MFP_PIN_GPIO11_2,
-	MFP_PIN_GPIO12_2,
-	MFP_PIN_GPIO13_2,
-	MFP_PIN_GPIO14_2,
-	MFP_PIN_GPIO15_2,
-	MFP_PIN_GPIO16_2,
-	MFP_PIN_GPIO17_2,
-
-	MFP_PIN_ULPI_STP,
-	MFP_PIN_ULPI_NXT,
-	MFP_PIN_ULPI_DIR,
-
-	MFP_PIN_nXCVREN,
-	MFP_PIN_DF_CLE_nOE,
-	MFP_PIN_DF_nADV1_ALE,
-	MFP_PIN_DF_SCLK_E,
-	MFP_PIN_DF_SCLK_S,
-	MFP_PIN_nBE0,
-	MFP_PIN_nBE1,
-	MFP_PIN_DF_nADV2_ALE,
-	MFP_PIN_DF_INT_RnB,
-	MFP_PIN_DF_nCS0,
-	MFP_PIN_DF_nCS1,
-	MFP_PIN_nLUA,
-	MFP_PIN_nLLA,
-	MFP_PIN_DF_nWE,
-	MFP_PIN_DF_ALE_nWE,
-	MFP_PIN_DF_nRE_nOE,
-	MFP_PIN_DF_ADDR0,
-	MFP_PIN_DF_ADDR1,
-	MFP_PIN_DF_ADDR2,
-	MFP_PIN_DF_ADDR3,
-	MFP_PIN_DF_IO0,
-	MFP_PIN_DF_IO1,
-	MFP_PIN_DF_IO2,
-	MFP_PIN_DF_IO3,
-	MFP_PIN_DF_IO4,
-	MFP_PIN_DF_IO5,
-	MFP_PIN_DF_IO6,
-	MFP_PIN_DF_IO7,
-	MFP_PIN_DF_IO8,
-	MFP_PIN_DF_IO9,
-	MFP_PIN_DF_IO10,
-	MFP_PIN_DF_IO11,
-	MFP_PIN_DF_IO12,
-	MFP_PIN_DF_IO13,
-	MFP_PIN_DF_IO14,
-	MFP_PIN_DF_IO15,
-
-	/* additional pins on PXA930 */
-	MFP_PIN_GSIM_UIO,
-	MFP_PIN_GSIM_UCLK,
-	MFP_PIN_GSIM_UDET,
-	MFP_PIN_GSIM_nURST,
-	MFP_PIN_PMIC_INT,
-	MFP_PIN_RDY,
-
-	MFP_PIN_MAX,
-};
-
-/*
- * a possible MFP configuration is represented by a 32-bit integer
- *
- * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
- * bit 10..12 - Alternate Function Selection
- * bit 13..15 - Drive Strength
- * bit 16..18 - Low Power Mode State
- * bit 19..20 - Low Power Mode Edge Detection
- * bit 21..22 - Run Mode Pull State
- *
- * to facilitate the definition, the following macros are provided
- *
- * MFP_CFG_DEFAULT - default MFP configuration value, with
- * 		  alternate function = 0,
- * 		  drive strength = fast 3mA (MFP_DS03X)
- * 		  low power mode = default
- * 		  edge detection = none
- *
- * MFP_CFG	- default MFPR value with alternate function
- * MFP_CFG_DRV	- default MFPR value with alternate function and
- * 		  pin drive strength
- * MFP_CFG_LPM	- default MFPR value with alternate function and
- * 		  low power mode
- * MFP_CFG_X	- default MFPR value with alternate function,
- * 		  pin drive strength and low power mode
- */
-
-typedef unsigned long mfp_cfg_t;
-
-#define MFP_PIN(x)		((x) & 0x3ff)
-
-#define MFP_AF0			(0x0 << 10)
-#define MFP_AF1			(0x1 << 10)
-#define MFP_AF2			(0x2 << 10)
-#define MFP_AF3			(0x3 << 10)
-#define MFP_AF4			(0x4 << 10)
-#define MFP_AF5			(0x5 << 10)
-#define MFP_AF6			(0x6 << 10)
-#define MFP_AF7			(0x7 << 10)
-#define MFP_AF_MASK		(0x7 << 10)
-#define MFP_AF(x)		(((x) >> 10) & 0x7)
-
-#define MFP_DS01X		(0x0 << 13)
-#define MFP_DS02X		(0x1 << 13)
-#define MFP_DS03X		(0x2 << 13)
-#define MFP_DS04X		(0x3 << 13)
-#define MFP_DS06X		(0x4 << 13)
-#define MFP_DS08X		(0x5 << 13)
-#define MFP_DS10X		(0x6 << 13)
-#define MFP_DS13X		(0x7 << 13)
-#define MFP_DS_MASK		(0x7 << 13)
-#define MFP_DS(x)		(((x) >> 13) & 0x7)
-
-#define MFP_LPM_DEFAULT		(0x0 << 16)
-#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
-#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
-#define MFP_LPM_PULL_LOW	(0x3 << 16)
-#define MFP_LPM_PULL_HIGH	(0x4 << 16)
-#define MFP_LPM_FLOAT		(0x5 << 16)
-#define MFP_LPM_INPUT		(0x6 << 16)
-#define MFP_LPM_STATE_MASK	(0x7 << 16)
-#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
-
-#define MFP_LPM_EDGE_NONE	(0x0 << 19)
-#define MFP_LPM_EDGE_RISE	(0x1 << 19)
-#define MFP_LPM_EDGE_FALL	(0x2 << 19)
-#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
-#define MFP_LPM_EDGE_MASK	(0x3 << 19)
-#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
-
-#define MFP_PULL_NONE		(0x0 << 21)
-#define MFP_PULL_LOW		(0x1 << 21)
-#define MFP_PULL_HIGH		(0x2 << 21)
-#define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
-
-#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
-				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
-
-#define MFP_CFG(pin, af)		\
-	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
-
-#define MFP_CFG_DRV(pin, af, drv)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
-
-#define MFP_CFG_LPM(pin, af, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
-
-#define MFP_CFG_X(pin, af, drv, lpm)	\
-	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
-	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+#include <plat/mfp.h>
 
 #endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
index 6d1304c..02a69dc 100644
--- a/arch/arm/mach-pxa/include/mach/mmc.h
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -14,6 +14,11 @@
 	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
+	int gpio_card_detect;			/* gpio detecting card insertion */
+	int gpio_card_ro;			/* gpio detecting read only toggle */
+	bool gpio_card_ro_invert;		/* gpio ro is inverted */
+	int gpio_power;				/* gpio powering up MMC bus */
+	bool gpio_power_invert;			/* gpio power is inverted */
 };
 
 extern void pxa_set_mci_info(struct pxamci_platform_data *info);
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
new file mode 100644
index 0000000..3dc9b07
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -0,0 +1,86 @@
+/*
+ * linux/include/asm-arm/arch-pxa/palmtc-gpio.h
+ *
+ * GPIOs and interrupts for Palm Tungsten|C Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Marek Vasut <marek.vasut@gmail.com>
+ *		Holger Bocklet <bitz.email@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTC_H_
+#define _INCLUDE_PALMTC_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTC_EARPHONE_DETECT	2
+#define GPIO_NR_PALMTC_CRADLE_DETECT	5
+#define GPIO_NR_PALMTC_HOTSYNC_BUTTON	7
+
+/* SD/MMC */
+#define GPIO_NR_PALMTC_SD_DETECT_N	12
+#define GPIO_NR_PALMTC_SD_POWER		32
+#define GPIO_NR_PALMTC_SD_READONLY	54
+
+/* WLAN */
+#define GPIO_NR_PALMTC_PCMCIA_READY	13
+#define GPIO_NR_PALMTC_PCMCIA_PWRREADY	14
+#define GPIO_NR_PALMTC_PCMCIA_POWER1	15
+#define GPIO_NR_PALMTC_PCMCIA_POWER2	33
+#define GPIO_NR_PALMTC_PCMCIA_POWER3	55
+#define GPIO_NR_PALMTC_PCMCIA_RESET	78
+
+/* UDC */
+#define GPIO_NR_PALMTC_USB_DETECT_N	4
+#define GPIO_NR_PALMTC_USB_POWER	36
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTC_BL_POWER		16
+#define GPIO_NR_PALMTC_LCD_POWER	44
+#define GPIO_NR_PALMTC_LCD_BLANK	38
+
+/* UART */
+#define GPIO_NR_PALMTC_RS232_POWER	37
+
+/* IRDA */
+#define GPIO_NR_PALMTC_IR_DISABLE	45
+
+/* IRQs */
+#define IRQ_GPIO_PALMTC_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY	IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+
+/* UCB1400 GPIOs */
+#define GPIO_NR_PALMTC_POWER_DETECT	(0x80 | 0x00)
+#define GPIO_NR_PALMTC_HEADPHONE_DETECT	(0x80 | 0x01)
+#define GPIO_NR_PALMTC_SPEAKER_ENABLE	(0x80 | 0x03)
+#define GPIO_NR_PALMTC_VIBRA_POWER	(0x80 | 0x05)
+#define GPIO_NR_PALMTC_LED_POWER	(0x80 | 0x07)
+
+/** HERE ARE INIT VALUES **/
+#define PALMTC_UCB1400_GPIO_OFFSET	0x80
+
+/* BATTERY */
+#define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
+#define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTC_MAX_LIFE_MINS		240	/* on-life in minutes */
+
+#define PALMTC_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTC_MAX_INTENSITY		0xFE
+#define PALMTC_DEFAULT_INTENSITY	0x7E
+#define PALMTC_LIMIT_MASK		0x7F
+#define PALMTC_PRESCALER		0x3F
+#define PALMTC_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index e74082c..1be0db6 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -82,6 +82,11 @@
 #define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
 #define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
 
+#define PALMTX_NAND_ALE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 24))
+#define PALMTX_NAND_CLE_PHYS	(PALMTX_PHYS_NAND_START | (1 << 25))
+#define PALMTX_NAND_ALE_VIRT	0xff100000
+#define PALMTX_NAND_CLE_VIRT	0xff200000
+
 /* TOUCHSCREEN */
 #define AC97_LINK_FRAME			21
 
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
index 7d1a059..e91d63c 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -208,7 +208,7 @@
 #define CKEN_MVED	43	/* < MVED clock enable */
 
 /* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
-#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
-#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+#define CKEN_PXA300_GCU		42	/* Graphics controller clock enable */
+#define CKEN_PXA320_GCU		7	/* Graphics controller clock enable */
 
 #endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index 6932720..f73061c 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -118,7 +118,8 @@
 	u_int		fixed_modes:1,
 			cmap_inverse:1,
 			cmap_static:1,
-			unused:29;
+			acceleration_enabled:1,
+			unused:28;
 
 	/* The following should be defined in LCCR0
 	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h
index ad23e74..68464ce 100644
--- a/arch/arm/mach-pxa/include/mach/regs-intc.h
+++ b/arch/arm/mach-pxa/include/mach/regs-intc.h
@@ -13,6 +13,7 @@
 #define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
 #define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
 #define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+#define ICHP		__REG(0x40D00018)  /* Interrupt Controller Highest Priority Register */
 
 #define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
 #define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
@@ -20,4 +21,14 @@
 #define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
 #define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
 
+#define ICIP3		__REG(0x40D00130)  /* Interrupt Controller IRQ Pending Register 3 */
+#define ICMR3		__REG(0x40D00134)  /* Interrupt Controller Mask Register 3 */
+#define ICLR3		__REG(0x40D00138)  /* Interrupt Controller Level Register 3 */
+#define ICFP3		__REG(0x40D0013C)  /* Interrupt Controller FIQ Pending Register 3 */
+#define ICPR3		__REG(0x40D00140)  /* Interrupt Controller Pending Register 3 */
+
+#define IPR(x)		__REG(0x40D0001C + (x < 32 ? (x << 2)		\
+				: (x < 64 ? (0x94 + ((x - 32) << 2))	\
+				: (0x128 + ((x - 64) << 2)))))
+
 #endif /* __ASM_MACH_REGS_INTC_H */
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
index b547494..237734b 100644
--- a/arch/arm/mach-pxa/include/mach/uncompress.h
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -37,7 +37,7 @@
 {
 	if (machine_is_littleton() || machine_is_intelmote2()
 	    || machine_is_csb726() || machine_is_stargate2()
-	    || machine_is_cm_x300())
+	    || machine_is_cm_x300() || machine_is_balloon3())
 		UART = STUART;
 }
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index f6e0300..d694ce2 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -120,7 +120,7 @@
 
 void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 {
-	int irq;
+	int irq, i;
 
 	pxa_internal_irq_nr = irq_nr;
 
@@ -129,6 +129,12 @@
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
 
+	/* initialize interrupt priority */
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < irq_nr; i++)
+			IPR(i) = i | (1 << 31);
+	}
+
 	/* only unmasked interrupts kick us out of idle */
 	ICCR = 1;
 
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 55b3788..1384895 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -265,45 +265,12 @@
 #endif
 
 #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
-static int littleton_mci_init(struct device *dev,
-			      irq_handler_t littleton_detect_int, void *data)
-{
-	int err, gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-
-	gpio_direction_input(gpio_cd);
-
-	err = request_irq(gpio_to_irq(gpio_cd), littleton_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "mmc card detect", data);
-	if (err) {
-		dev_err(dev, "failed to request card detect IRQ\n");
-		goto err_request_irq;
-	}
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void littleton_mci_exit(struct device *dev, void *data)
-{
-	int gpio_cd = GPIO_MMC1_CARD_DETECT;
-
-	free_irq(gpio_to_irq(gpio_cd), data);
-	gpio_free(gpio_cd);
-}
-
 static struct pxamci_platform_data littleton_mci_platform_data = {
-	.detect_delay	= 20,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= littleton_mci_init,
-	.exit		= littleton_mci_exit,
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_MMC1_CARD_DETECT,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void __init littleton_init_mmc(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index f04c833..c6a94d3 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -482,11 +482,14 @@
 }
 
 static struct pxamci_platform_data lubbock_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.detect_delay	= 1,
-	.init 		= lubbock_mci_init,
-	.get_ro		= lubbock_mci_get_ro,
-	.exit 		= lubbock_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay		= 1,
+	.init 			= lubbock_mci_init,
+	.get_ro			= lubbock_mci_get_ro,
+	.exit 			= lubbock_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
@@ -504,8 +507,9 @@
 }
 
 static struct pxaficp_platform_data lubbock_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE,
-	.transceiver_mode = lubbock_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE,
+	.transceiver_mode	= lubbock_irda_transceiver_mode,
 };
 
 static void __init lubbock_init(void)
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index ca39669..5360c07 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -140,15 +140,9 @@
  * IRDA
  */
 
-static void magician_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data magician_ficp_info = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = magician_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO83_MAGICIAN_nIR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /*
@@ -651,55 +645,24 @@
 static int magician_mci_init(struct device *dev,
 				irq_handler_t detect_irq, void *data)
 {
-	int err;
-
-	err = request_irq(IRQ_MAGICIAN_SD, detect_irq,
+	return request_irq(IRQ_MAGICIAN_SD, detect_irq,
 				IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
-				"MMC card detect", data);
-	if (err)
-		goto err_request_irq;
-	err = gpio_request(EGPIO_MAGICIAN_SD_POWER, "SD_POWER");
-	if (err)
-		goto err_request_power;
-	err = gpio_request(EGPIO_MAGICIAN_nSD_READONLY, "nSD_READONLY");
-	if (err)
-		goto err_request_readonly;
-
-	return 0;
-
-err_request_readonly:
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
-err_request_power:
-	free_irq(IRQ_MAGICIAN_SD, data);
-err_request_irq:
-	return err;
-}
-
-static void magician_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *pdata = dev->platform_data;
-
-	gpio_set_value(EGPIO_MAGICIAN_SD_POWER, (1 << vdd) & pdata->ocr_mask);
-}
-
-static int magician_mci_get_ro(struct device *dev)
-{
-	return (!gpio_get_value(EGPIO_MAGICIAN_nSD_READONLY));
+				"mmc card detect", data);
 }
 
 static void magician_mci_exit(struct device *dev, void *data)
 {
-	gpio_free(EGPIO_MAGICIAN_nSD_READONLY);
-	gpio_free(EGPIO_MAGICIAN_SD_POWER);
 	free_irq(IRQ_MAGICIAN_SD, data);
 }
 
 static struct pxamci_platform_data magician_mci_info = {
-	.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init     = magician_mci_init,
-	.get_ro   = magician_mci_get_ro,
-	.setpower = magician_mci_setpower,
-	.exit     = magician_mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init     		= magician_mci_init,
+	.exit     		= magician_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= EGPIO_MAGICIAN_nSD_READONLY,
+	.gpio_card_ro_invert	= 1,
+	.gpio_power		= EGPIO_MAGICIAN_SD_POWER,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index f4dabf0..a4eeae3 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -450,10 +450,13 @@
 }
 
 static struct pxamci_platform_data mainstone_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= mainstone_mci_init,
-	.setpower 	= mainstone_mci_setpower,
-	.exit		= mainstone_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= mainstone_mci_init,
+	.setpower 		= mainstone_mci_setpower,
+	.exit			= mainstone_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
@@ -476,8 +479,9 @@
 }
 
 static struct pxaficp_platform_data mainstone_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = mainstone_irda_transceiver_mode,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= mainstone_irda_transceiver_mode,
 };
 
 static struct gpio_keys_button gpio_keys_button[] = {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 2d28132..3cab452 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -434,72 +434,15 @@
 /*
  * SDIO/MMC Card controller
  */
-static void mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-
-	if ((1 << vdd) & p_d->ocr_mask)
-		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
-	else
-		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
-}
-
-static int mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO78_SDIO_RO);
-}
-
-struct gpio_ress mci_gpios[] = {
-	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
-	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
-	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
-};
-
-static void mci_exit(struct device *dev, void *data)
-{
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
-}
-
-static struct pxamci_platform_data mioa701_mci_info;
-
 /**
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
-{
-	int rc;
-	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
-
-	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
-	if (rc)
-		goto err_gpio;
-	/* enable RE/FE interrupt on card insertion and removal */
-	rc = request_irq(irq, detect_int,
-			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			 IRQF_TRIGGER_FALLING,
-			 "MMC card detect", data);
-	if (rc)
-		goto err_irq;
-
-	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
-	return 0;
-
-err_irq:
-	dev_err(dev, "mioa701_mci_init: MMC/SD:"
-		" can't request MMC card detect IRQ\n");
-	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
-err_gpio:
-	return rc;
-}
-
 static struct pxamci_platform_data mioa701_mci_info = {
-	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init	  = mci_init,
-	.get_ro	  = mci_get_ro,
-	.setpower = mci_setpower,
-	.exit	  = mci_exit,
+	.ocr_mask 		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO15_SDIO_INSERT,
+	.gpio_card_ro		= GPIO78_SDIO_RO,
+	.gpio_power		= GPIO91_SDIO_EN,
 };
 
 /* FlashRAM */
@@ -765,19 +708,20 @@
 	},
 };
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match id in pxa27x_device_camera in device.c */
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata mioa701_i2c_devices[] = {
 	{
-		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("mt9m111", 0x5d),
-		.platform_data = &iclink,
 	},
 };
 
+static struct soc_camera_link iclink = {
+	.bus_id		= 0, /* Match id in pxa27x_device_camera in device.c */
+	.board_info	= &mioa701_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9m111",
+};
+
 struct i2c_pxa_platform_data i2c_pdata = {
 	.fast_mode = 1,
 };
@@ -811,6 +755,7 @@
 MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
 MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
 MIO_SIMPLE_DEV(gpio_vbus,	  "gpio-vbus",      &gpio_vbus_data);
+MIO_SIMPLE_DEV(mioa701_camera,	  "soc-camera-pdrv",&iclink);
 
 static struct platform_device *devices[] __initdata = {
 	&mioa701_gpio_keys,
@@ -821,6 +766,7 @@
 	&power_dev,
 	&strataflash,
 	&gpio_vbus,
+	&mioa701_camera,
 	&mioa701_board,
 };
 
@@ -841,7 +787,7 @@
 static struct gpio_ress global_gpios[] = {
 	MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"),
 	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
-	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"),
 };
 
 static void __init mioa701_machine_init(void)
@@ -855,6 +801,7 @@
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&mioa701_mci_info);
 	pxa_set_keypad_info(&mioa701_keypad_info);
 	wm97xx_bat_set_pdata(&mioa701_battery_data);
@@ -869,7 +816,6 @@
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
-	i2c_register_board_info(0, ARRAY_AND_SIZE(mioa701_i2c_devices));
 }
 
 static void mioa701_machine_exit(void)
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 169fcc1..1ad029d 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -25,6 +25,9 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/sysdev.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -141,85 +144,50 @@
 };
 
 /******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmld_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmld_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmld_partitions,
+		.nr_parts	= ARRAY_SIZE(palmld_partitions)
+	}
+};
+
+static struct resource palmld_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_4M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmld_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmld_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmld_flash_data,
+	},
+};
+
+/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmld_mci_init(struct device *dev, irq_handler_t palmld_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMLD_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N),
-			palmld_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMLD_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMLD_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMLD_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmld_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMLD_SD_READONLY);
-	gpio_free(GPIO_NR_PALMLD_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMLD_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMLD_SD_DETECT_N);
-}
-
-static void palmld_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMLD_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmld_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMLD_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmld_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmld_mci_power,
-	.get_ro		= palmld_mci_get_ro,
-	.init 		= palmld_mci_init,
-	.exit		= palmld_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMLD_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMLD_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMLD_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -336,35 +304,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmld_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMLD_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMLD_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmld_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMLD_IR_DISABLE);
-}
-
-static void palmld_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMLD_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmld_ficp_platform_data = {
-	.startup		= palmld_irda_startup,
-	.shutdown		= palmld_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmld_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMLD_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -560,6 +502,7 @@
 	&power_supply,
 	&palmld_asoc,
 	&palmld_hdd,
+	&palmld_flash,
 };
 
 static struct map_desc palmld_io_desc[] __initdata = {
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 33f726f..2dd7ce2 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -124,83 +124,12 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmt5_mci_init(struct device *dev, irq_handler_t palmt5_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMT5_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N),
-			palmt5_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMT5_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMT5_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMT5_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMT5_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmt5_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMT5_SD_READONLY);
-	gpio_free(GPIO_NR_PALMT5_SD_POWER);
-	free_irq(IRQ_GPIO_PALMT5_SD_DETECT_N, data);
-	gpio_free(GPIO_NR_PALMT5_SD_DETECT_N);
-}
-
-static void palmt5_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMT5_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmt5_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMT5_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmt5_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmt5_mci_power,
-	.get_ro		= palmt5_mci_get_ro,
-	.init 		= palmt5_mci_init,
-	.exit		= palmt5_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMT5_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMT5_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMT5_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -314,35 +243,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmt5_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMT5_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMT5_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmt5_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMT5_IR_DISABLE);
-}
-
-static void palmt5_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMT5_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmt5_ficp_platform_data = {
-	.startup		= palmt5_irda_startup,
-	.shutdown		= palmt5_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmt5_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMT5_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
new file mode 100644
index 0000000..bb2cc0d
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -0,0 +1,436 @@
+/*
+ * linux/arch/arm/mach-pxa/palmtc.c
+ *
+ * Support for the Palm Tungsten|C
+ *
+ * Author:	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Petr Blaha <p3t3@centrum.cz>
+ *		Chetan S. Kumar <shivakumar.chetan@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/input.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/ucb1400.h>
+#include <linux/power_supply.h>
+#include <linux/gpio_keys.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtc.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/irda.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx-regs.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtc_pin_config[] __initdata = {
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+	GPIO12_GPIO,	/* detect */
+	GPIO32_GPIO,	/* power */
+	GPIO54_GPIO,	/* r/o switch */
+
+	/* PCMCIA */
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO49_nPWE,
+	GPIO48_nPOE,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO57_nIOIS16,
+	GPIO56_nPWAIT,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO45_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO17_PWM1_OUT,
+
+	/* USB */
+	GPIO4_GPIO,	/* detect */
+	GPIO36_GPIO,	/* pullup */
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* MATRIX KEYPAD */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 0 */
+	GPIO9_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 1 */
+	GPIO10_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 2 */
+	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* in 3 */
+	GPIO18_GPIO | MFP_LPM_DRIVE_LOW,	/* out 0 */
+	GPIO19_GPIO | MFP_LPM_DRIVE_LOW,	/* out 1 */
+	GPIO20_GPIO | MFP_LPM_DRIVE_LOW,	/* out 2 */
+	GPIO21_GPIO | MFP_LPM_DRIVE_LOW,	/* out 3 */
+	GPIO22_GPIO | MFP_LPM_DRIVE_LOW,	/* out 4 */
+	GPIO23_GPIO | MFP_LPM_DRIVE_LOW,	/* out 5 */
+	GPIO24_GPIO | MFP_LPM_DRIVE_LOW,	/* out 6 */
+	GPIO25_GPIO | MFP_LPM_DRIVE_LOW,	/* out 7 */
+	GPIO26_GPIO | MFP_LPM_DRIVE_LOW,	/* out 8 */
+	GPIO27_GPIO | MFP_LPM_DRIVE_LOW,	/* out 9 */
+	GPIO79_GPIO | MFP_LPM_DRIVE_LOW,	/* out 10 */
+	GPIO80_GPIO | MFP_LPM_DRIVE_LOW,	/* out 11 */
+
+	/* PXA GPIO KEYS */
+	GPIO7_GPIO | WAKEUP_ON_EDGE_BOTH,	/* hotsync button on cradle */
+
+	/* MISC */
+	GPIO1_RST,	/* reset */
+	GPIO2_GPIO,	/* earphone detect */
+	GPIO16_GPIO,	/* backlight switch */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static struct pxamci_platform_data palmtc_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_power		= GPIO_NR_PALMTC_SD_POWER,
+	.gpio_card_ro		= GPIO_NR_PALMTC_SD_READONLY,
+	.gpio_card_detect	= GPIO_NR_PALMTC_SD_DETECT_N,
+	.detect_delay		= 20,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtc_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTC_HOTSYNC_BUTTON, 1, "HotSync Button", EV_KEY, 1},
+};
+
+static struct gpio_keys_platform_data palmtc_pxa_keys_data = {
+	.buttons	= palmtc_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtc_pxa_buttons),
+};
+
+static struct platform_device palmtc_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtc_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_BL_POWER, 1);
+	if (ret)
+		goto err2;
+
+	return 0;
+
+err2:
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtc_backlight_notify(int brightness)
+{
+	/* backlight is on when GPIO16 AF0 is high */
+	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
+	return brightness;
+}
+
+static void palmtc_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTC_BL_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtc_backlight_data = {
+	.pwm_id		= 1,
+	.max_brightness	= PALMTC_MAX_INTENSITY,
+	.dft_brightness	= PALMTC_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTC_PERIOD_NS,
+	.init		= palmtc_backlight_init,
+	.notify		= palmtc_backlight_notify,
+	.exit		= palmtc_backlight_exit,
+};
+
+static struct platform_device palmtc_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa25x_device_pwm1.dev,
+		.platform_data	= &palmtc_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static struct pxaficp_platform_data palmtc_ficp_platform_data = {
+	.gpio_pwdown		= GPIO_NR_PALMTC_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+};
+
+/******************************************************************************
+ * Keyboard
+ ******************************************************************************/
+static const uint32_t palmtc_matrix_keys[] = {
+	KEY(0, 0, KEY_F1),
+	KEY(0, 1, KEY_X),
+	KEY(0, 2, KEY_POWER),
+	KEY(0, 3, KEY_TAB),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_LEFTSHIFT),
+	KEY(0, 7, KEY_Z),
+	KEY(0, 8, KEY_S),
+	KEY(0, 9, KEY_W),
+	KEY(0, 10, KEY_E),
+	KEY(0, 11, KEY_UP),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_DOWN),
+	KEY(1, 3, KEY_D),
+	KEY(1, 4, KEY_C),
+	KEY(1, 5, KEY_F),
+	KEY(1, 6, KEY_R),
+	KEY(1, 7, KEY_SPACE),
+	KEY(1, 8, KEY_V),
+	KEY(1, 9, KEY_G),
+	KEY(1, 10, KEY_T),
+	KEY(1, 11, KEY_LEFT),
+
+	KEY(2, 0, KEY_F3),
+	KEY(2, 1, KEY_LEFTCTRL),
+	KEY(2, 3, KEY_H),
+	KEY(2, 4, KEY_Y),
+	KEY(2, 5, KEY_N),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_U),
+	KEY(2, 8, KEY_M),
+	KEY(2, 9, KEY_K),
+	KEY(2, 10, KEY_I),
+	KEY(2, 11, KEY_RIGHT),
+
+	KEY(3, 0, KEY_F4),
+	KEY(3, 1, KEY_ENTER),
+	KEY(3, 3, KEY_DOT),
+	KEY(3, 4, KEY_L),
+	KEY(3, 5, KEY_O),
+	KEY(3, 6, KEY_LEFTALT),
+	KEY(3, 7, KEY_ENTER),
+	KEY(3, 8, KEY_BACKSPACE),
+	KEY(3, 9, KEY_P),
+	KEY(3, 10, KEY_B),
+	KEY(3, 11, KEY_FN),
+};
+
+const struct matrix_keymap_data palmtc_keymap_data = {
+	.keymap			= palmtc_matrix_keys,
+	.keymap_size		= ARRAY_SIZE(palmtc_matrix_keys),
+};
+
+const static unsigned int palmtc_keypad_row_gpios[] = {
+	0, 9, 10, 11
+};
+
+const static unsigned int palmtc_keypad_col_gpios[] = {
+	18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80
+};
+
+static struct matrix_keypad_platform_data palmtc_keypad_platform_data = {
+	.keymap_data	= &palmtc_keymap_data,
+	.col_gpios	= palmtc_keypad_row_gpios,
+	.num_col_gpios	= 12,
+	.row_gpios	= palmtc_keypad_col_gpios,
+	.num_row_gpios	= 4,
+	.active_low	= 1,
+
+	.debounce_ms		= 20,
+	.col_scan_delay_us	= 5,
+};
+
+static struct platform_device palmtc_keyboard = {
+	.name	= "matrix-keypad",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtc_keypad_platform_data,
+	},
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static struct pxa2xx_udc_mach_info palmtc_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTC_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.gpio_pullup		= GPIO_NR_PALMTC_USB_POWER,
+};
+
+/******************************************************************************
+ * Touchscreen / Battery / GPIO-extender
+ ******************************************************************************/
+static struct platform_device palmtc_ucb1400_core = {
+	.name	= "ucb1400_core",
+	.id	= -1,
+};
+
+/******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct resource palmtc_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_16M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct mtd_partition palmtc_flash_parts[] = {
+	{
+		.name	= "U-Boot Bootloader",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "Linux Kernel",
+		.offset	= 0x40000,
+		.size	= 0x2c0000,
+	},
+	{
+		.name	= "Filesystem",
+		.offset	= 0x300000,
+		.size	= 0xcc0000,
+	},
+	{
+		.name	= "U-Boot Environment",
+		.offset	= 0xfc0000,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct physmap_flash_data palmtc_flash_data = {
+	.width		= 4,
+	.parts		= palmtc_flash_parts,
+	.nr_parts	= ARRAY_SIZE(palmtc_flash_parts),
+};
+
+static struct platform_device palmtc_flash = {
+	.name		= "physmap-flash",
+	.id		= -1,
+	.resource	= &palmtc_flash_resource,
+	.num_resources	= 1,
+	.dev = {
+		.platform_data	= &palmtc_flash_data,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtc_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtc_lcd_screen = {
+	.modes			= palmtc_lcd_modes,
+	.num_modes		= ARRAY_SIZE(palmtc_lcd_modes),
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmtc_backlight,
+	&palmtc_ucb1400_core,
+	&palmtc_keyboard,
+	&palmtc_pxa_keys,
+	&palmtc_flash,
+};
+
+static void __init palmtc_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
+
+	set_pxa_fb_info(&palmtc_lcd_screen);
+	pxa_set_mci_info(&palmtc_mci_platform_data);
+	pxa_set_udc_info(&palmtc_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtc_ficp_platform_data);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+};
+
+MACHINE_START(PALMTC, "Palm Tungsten|C")
+	.phys_io	= 0x40000000,
+	.boot_params 	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtc_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index d823b09..277c406 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -117,83 +117,11 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmte2_mci_init(struct device *dev,
-				irq_handler_t palmte2_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N),
-			palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmte2_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTE2_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTE2_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N);
-}
-
-static void palmte2_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmte2_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmte2_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmte2_mci_power,
-	.get_ro		= palmte2_mci_get_ro,
-	.init 		= palmte2_mci_init,
-	.exit		= palmte2_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTE2_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTE2_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTE2_SD_POWER,
 };
 
 /******************************************************************************
@@ -287,35 +215,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmte2_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmte2_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTE2_IR_DISABLE);
-}
-
-static void palmte2_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmte2_ficp_platform_data = {
-	.startup		= palmte2_irda_startup,
-	.shutdown		= palmte2_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmte2_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTE2_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 83d0208..76a2b37 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -28,6 +28,10 @@
 #include <linux/wm97xx_batt.h>
 #include <linux/power_supply.h>
 #include <linux/usb/gpio_vbus.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -131,6 +135,10 @@
 	GPIO34_FFUART_RXD,
 	GPIO39_FFUART_TXD,
 
+	/* NAND */
+	GPIO15_nCS_1,
+	GPIO18_RDY,
+
 	/* MISC. */
 	GPIO10_GPIO,	/* hotsync button */
 	GPIO12_GPIO,	/* power detect */
@@ -138,85 +146,50 @@
 };
 
 /******************************************************************************
+ * NOR Flash
+ ******************************************************************************/
+static struct mtd_partition palmtx_partitions[] = {
+	{
+		.name		= "Flash",
+		.offset		= 0x00000000,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0
+	}
+};
+
+static struct physmap_flash_data palmtx_flash_data[] = {
+	{
+		.width		= 2,			/* bankwidth in bytes */
+		.parts		= palmtx_partitions,
+		.nr_parts	= ARRAY_SIZE(palmtx_partitions)
+	}
+};
+
+static struct resource palmtx_flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device palmtx_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.resource	= &palmtx_flash_resource,
+	.num_resources	= 1,
+	.dev 		= {
+		.platform_data = palmtx_flash_data,
+	},
+};
+
+/******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
-				void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMTX_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N),
-			palmtx_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMTX_SD_POWER, 0);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMTX_SD_READONLY);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmtx_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
-	gpio_free(GPIO_NR_PALMTX_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_PALMTX_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMTX_SD_DETECT_N);
-}
-
-static void palmtx_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int palmtx_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
-}
-
 static struct pxamci_platform_data palmtx_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmtx_mci_power,
-	.get_ro		= palmtx_mci_get_ro,
-	.init 		= palmtx_mci_init,
-	.exit		= palmtx_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMTX_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMTX_SD_READONLY,
+	.gpio_power		= GPIO_NR_PALMTX_SD_POWER,
+	.detect_delay		= 20,
 };
 
 /******************************************************************************
@@ -330,35 +303,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmtx_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMTX_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMTX_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmtx_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMTX_IR_DISABLE);
-}
-
-static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmtx_ficp_platform_data = {
-	.startup		= palmtx_irda_startup,
-	.shutdown		= palmtx_irda_shutdown,
-	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode	= palmtx_irda_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_PALMTX_IR_DISABLE,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -493,6 +440,68 @@
 };
 
 /******************************************************************************
+ * NAND Flash
+ ******************************************************************************/
+static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
+				 unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	if (ctrl & NAND_CLE)
+		writeb(cmd, PALMTX_NAND_CLE_VIRT);
+	else if (ctrl & NAND_ALE)
+		writeb(cmd, PALMTX_NAND_ALE_VIRT);
+	else
+		writeb(cmd, nandaddr);
+}
+
+static struct mtd_partition palmtx_partition_info[] = {
+	[0] = {
+		.name	= "palmtx-0",
+		.offset	= 0,
+		.size	= MTDPART_SIZ_FULL
+	},
+};
+
+static const char *palmtx_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data palmtx_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(palmtx_partition_info),
+		.partitions		= palmtx_partition_info,
+		.chip_delay		= 20,
+		.part_probe_types 	= palmtx_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= palmtx_nand_cmd_ctl,
+	},
+};
+
+static struct resource palmtx_nand_resource[] = {
+	[0]	= {
+		.start	= PXA_CS1_PHYS,
+		.end	= PXA_CS1_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device palmtx_nand = {
+	.name		= "gen_nand",
+	.num_resources	= ARRAY_SIZE(palmtx_nand_resource),
+	.resource	= palmtx_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &palmtx_nand_platdata,
+	}
+};
+
+/******************************************************************************
  * Power management - standby
  ******************************************************************************/
 static void __init palmtx_pm_init(void)
@@ -518,6 +527,8 @@
 	&power_supply,
 	&palmtx_asoc,
 	&palmtx_gpio_vbus,
+	&palmtx_flash,
+	&palmtx_nand,
 };
 
 static struct map_desc palmtx_io_desc[] __initdata = {
@@ -525,8 +536,18 @@
 	.virtual	= PALMTX_PCMCIA_VIRT,
 	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
 	.length		= PALMTX_PCMCIA_SIZE,
-	.type		= MT_DEVICE
-},
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_ALE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_ALE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}, {
+	.virtual	= PALMTX_NAND_CLE_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_NAND_CLE_PHYS),
+	.length		= SZ_1M,
+	.type		= MT_DEVICE,
+}
 };
 
 static void __init palmtx_map_io(void)
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c3645aa..c2bf493 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -129,88 +129,14 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int palmz72_mci_init(struct device *dev,
-				irq_handler_t palmz72_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
-	if (err)
-		goto err;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
-	if (err)
-		goto err2;
-	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
-			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
-				__func__);
-		goto err2;
-	}
-
-	/* SD_POWER is not actually power, but it is more like chip
-	 * select, i.e. it is inverted */
-
-	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
-	if (err)
-		goto err3;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	if (err)
-		goto err4;
-	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
-	if (err)
-		goto err4;
-	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
-	if (err)
-		goto err5;
-
-	printk(KERN_DEBUG "%s: irq registered\n", __func__);
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-err4:
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void palmz72_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
-	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
-	gpio_free(GPIO_NR_PALMZ72_SD_RO);
-}
-
-static void palmz72_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	if (p_d->ocr_mask & (1 << vdd))
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
-	else
-		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
-}
-
-static int palmz72_mci_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
-}
-
+/* SD_POWER is not actually power, but it is more like chip
+ * select, i.e. it is inverted */
 static struct pxamci_platform_data palmz72_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= palmz72_mci_power,
-	.get_ro		= palmz72_mci_ro,
-	.init 		= palmz72_mci_init,
-	.exit		= palmz72_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_PALMZ72_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_PALMZ72_SD_RO,
+	.gpio_power		= GPIO_NR_PALMZ72_SD_POWER_N,
+	.gpio_power_invert	= 1,
 };
 
 /******************************************************************************
@@ -304,35 +230,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static int palmz72_irda_startup(struct device *dev)
-{
-	int err;
-	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
-	if (err)
-		goto err;
-	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
-	if (err)
-		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-err:
-	return err;
-}
-
-static void palmz72_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
-}
-
-static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
 static struct pxaficp_platform_data palmz72_ficp_platform_data = {
-	.startup		= palmz72_irda_startup,
-	.shutdown		= palmz72_irda_shutdown,
+	.gpio_pwdown		= GPIO_NR_PALMZ72_IR_DISABLE,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= palmz72_irda_transceiver_mode,
 };
 
 /******************************************************************************
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 01791d7..bbda570 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -321,11 +321,14 @@
 #define MSECS_PER_JIFFY (1000/HZ)
 
 static struct pxamci_platform_data pcm990_mci_platform_data = {
-	.detect_delay	= 250 / MSECS_PER_JIFFY,
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.init 		= pcm990_mci_init,
-	.setpower 	= pcm990_mci_setpower,
-	.exit		= pcm990_mci_exit,
+	.detect_delay		= 250 / MSECS_PER_JIFFY,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init 			= pcm990_mci_init,
+	.setpower 		= pcm990_mci_setpower,
+	.exit			= pcm990_mci_exit,
+	.gpio_card_detect	= -1,
+	.gpio_card_ro		= -1,
+	.gpio_power		= -1,
 };
 
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
@@ -427,25 +430,56 @@
 	gpio_bus_switch = -EINVAL;
 }
 
-static struct soc_camera_link iclink = {
-	.bus_id	= 0, /* Must match with the camera ID above */
-	.query_bus_param = pcm990_camera_query_bus_param,
-	.set_bus_param = pcm990_camera_set_bus_param,
-	.free_bus = pcm990_camera_free_bus,
-};
-
 /* Board I2C devices. */
 static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 	{
 		/* Must initialize before the camera(s) */
 		I2C_BOARD_INFO("pca9536", 0x41),
 		.platform_data = &pca9536_data,
-	}, {
+	},
+};
+
+static struct i2c_board_info pcm990_camera_i2c[] = {
+	{
 		I2C_BOARD_INFO("mt9v022", 0x48),
-		.platform_data = &iclink, /* With extender */
 	}, {
 		I2C_BOARD_INFO("mt9m001", 0x5d),
-		.platform_data = &iclink, /* With extender */
+	},
+};
+
+static struct soc_camera_link iclink[] = {
+	{
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[0],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9v022",
+	}, {
+		.bus_id			= 0, /* Must match with the camera ID */
+		.board_info		= &pcm990_camera_i2c[1],
+		.i2c_adapter_id		= 0,
+		.query_bus_param	= pcm990_camera_query_bus_param,
+		.set_bus_param		= pcm990_camera_set_bus_param,
+		.free_bus		= pcm990_camera_free_bus,
+		.module_name		= "mt9m001",
+	},
+};
+
+static struct platform_device pcm990_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &iclink[0],
+		},
+	}, {
+		.name	= "soc-camera-pdrv",
+		.id	= 1,
+		.dev	= {
+			.platform_data = &iclink[1],
+		},
 	},
 };
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
@@ -501,6 +535,9 @@
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
+
+	platform_device_register(&pcm990_camera[0]);
+	platform_device_register(&pcm990_camera[1]);
 #endif
 
 	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 9352d4a..a186994 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -245,20 +245,10 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-static struct pxamci_platform_data poodle_mci_platform_data;
-
 static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int, void *data)
 {
 	int err;
 
-	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
 	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
 	if (err)
 		goto err_free_2;
@@ -267,34 +257,14 @@
 	if (err)
 		goto err_free_3;
 
-	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
-	gpio_direction_input(POODLE_GPIO_nSD_WP);
-
 	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
 	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
-	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_4;
-	}
-
 	return 0;
 
-err_free_4:
-	gpio_free(POODLE_GPIO_SD_PWR1);
 err_free_3:
 	gpio_free(POODLE_GPIO_SD_PWR);
 err_free_2:
-	gpio_free(POODLE_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(POODLE_GPIO_nSD_DETECT);
-err_out:
 	return err;
 }
 
@@ -312,62 +282,29 @@
 	}
 }
 
-static int poodle_mci_get_ro(struct device *dev)
-{
-	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
-	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
-}
-
-
 static void poodle_mci_exit(struct device *dev, void *data)
 {
-	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
 	gpio_free(POODLE_GPIO_SD_PWR1);
 	gpio_free(POODLE_GPIO_SD_PWR);
-	gpio_free(POODLE_GPIO_nSD_WP);
-	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= poodle_mci_init,
-	.get_ro		= poodle_mci_get_ro,
-	.setpower 	= poodle_mci_setpower,
-	.exit		= poodle_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 			= poodle_mci_init,
+	.setpower 		= poodle_mci_setpower,
+	.exit			= poodle_mci_exit,
+	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
 /*
  * Irda
  */
-static void poodle_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int poodle_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
-	if (err)
-		return err;
-
-	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
-	return 0;
-}
-
-static void poodle_irda_shutdown(struct device *dev)
-{
-	gpio_free(POODLE_GPIO_IR_ON);
-}
-
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
+	.gpio_pwdown		= POODLE_GPIO_IR_ON,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= poodle_irda_transceiver_mode,
-	.startup		= poodle_irda_startup,
-	.shutdown		= poodle_irda_shutdown,
 };
 
 
@@ -521,6 +458,7 @@
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
 	pxa_set_udc_info(&udc_info);
+	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
index 2f3394f..8682704 100644
--- a/arch/arm/mach-pxa/pxa2xx.c
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -52,3 +52,4 @@
 	} else
 		BUG();
 }
+EXPORT_SYMBOL_GPL(pxa2xx_transceiver_mode);
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 4ba6d21..f4af6e2b 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -84,9 +84,11 @@
 };
 
 static DEFINE_PXA3_CKEN(common_nand, NAND, 156000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0);
 
 static struct clk_lookup common_clkregs[] = {
 	INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0);
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 8b3d97e..c7373e7 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -78,9 +78,11 @@
 };
 
 static DEFINE_PXA3_CKEN(pxa320_nand, NAND, 104000000, 0);
+static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0);
 
 static struct clk_lookup pxa320_clkregs[] = {
 	INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL),
+	INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL),
 };
 
 static int __init pxa320_init(void)
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
index 7113174..0642920 100644
--- a/arch/arm/mach-pxa/pxa930.c
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -176,13 +176,30 @@
 	MFP_ADDR_END,
 };
 
+static struct mfp_addr_map pxa935_mfp_addr_map[] __initdata = {
+	MFP_ADDR(GPIO159, 0x0524),
+	MFP_ADDR(GPIO163, 0x0534),
+	MFP_ADDR(GPIO167, 0x0544),
+	MFP_ADDR(GPIO168, 0x0548),
+	MFP_ADDR(GPIO169, 0x054c),
+	MFP_ADDR(GPIO170, 0x0550),
+	MFP_ADDR(GPIO171, 0x0554),
+	MFP_ADDR(GPIO172, 0x0558),
+	MFP_ADDR(GPIO173, 0x055c),
+
+	MFP_ADDR_END,
+};
+
 static int __init pxa930_init(void)
 {
-	if (cpu_is_pxa930()) {
+	if (cpu_is_pxa930() || cpu_is_pxa935()) {
 		mfp_init_base(io_p2v(MFPR_BASE));
 		mfp_init_addr(pxa930_mfp_addr_map);
 	}
 
+	if (cpu_is_pxa935())
+		mfp_init_addr(pxa935_mfp_addr_map);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index dda310f..ee8d603 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -24,6 +24,7 @@
 #include <linux/spi/ads7846.h>
 #include <linux/spi/corgi_lcd.h>
 #include <linux/mtd/sharpsl.h>
+#include <linux/input/matrix_keypad.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -111,6 +112,26 @@
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* GPIO matrix keypad */
+	GPIO88_GPIO,	/* column 0 */
+	GPIO23_GPIO,	/* column 1 */
+	GPIO24_GPIO,	/* column 2 */
+	GPIO25_GPIO,	/* column 3 */
+	GPIO26_GPIO,	/* column 4 */
+	GPIO27_GPIO,	/* column 5 */
+	GPIO52_GPIO,	/* column 6 */
+	GPIO103_GPIO,	/* column 7 */
+	GPIO107_GPIO,	/* column 8 */
+	GPIO108_GPIO,	/* column 9 */
+	GPIO114_GPIO,	/* column 10 */
+	GPIO12_GPIO,	/* row 0 */
+	GPIO17_GPIO,	/* row 1 */
+	GPIO91_GPIO,	/* row 2 */
+	GPIO34_GPIO,	/* row 3 */
+	GPIO36_GPIO,	/* row 4 */
+	GPIO38_GPIO,	/* row 5 */
+	GPIO39_GPIO,	/* row 6 */
+
 	/* I2C */
 	GPIO117_I2C_SCL,
 	GPIO118_I2C_SDA,
@@ -242,9 +263,115 @@
 /*
  * Spitz Keyboard Device
  */
+#define SPITZ_KEY_CALENDAR	KEY_F1
+#define SPITZ_KEY_ADDRESS	KEY_F2
+#define SPITZ_KEY_FN		KEY_F3
+#define SPITZ_KEY_CANCEL	KEY_F4
+#define SPITZ_KEY_EXOK		KEY_F5
+#define SPITZ_KEY_EXCANCEL	KEY_F6
+#define SPITZ_KEY_EXJOGDOWN	KEY_F7
+#define SPITZ_KEY_EXJOGUP	KEY_F8
+#define SPITZ_KEY_JAP1		KEY_LEFTALT
+#define SPITZ_KEY_JAP2		KEY_RIGHTCTRL
+#define SPITZ_KEY_SYNC		KEY_F9
+#define SPITZ_KEY_MAIL		KEY_F10
+#define SPITZ_KEY_OK		KEY_F11
+#define SPITZ_KEY_MENU		KEY_F12
+
+static const uint32_t spitzkbd_keymap[] = {
+	KEY(0, 0, KEY_LEFTCTRL),
+	KEY(0, 1, KEY_1),
+	KEY(0, 2, KEY_3),
+	KEY(0, 3, KEY_5),
+	KEY(0, 4, KEY_6),
+	KEY(0, 5, KEY_7),
+	KEY(0, 6, KEY_9),
+	KEY(0, 7, KEY_0),
+	KEY(0, 8, KEY_BACKSPACE),
+	KEY(0, 9, SPITZ_KEY_EXOK),	/* EXOK */
+	KEY(0, 10, SPITZ_KEY_EXCANCEL),	/* EXCANCEL */
+	KEY(1, 1, KEY_2),
+	KEY(1, 2, KEY_4),
+	KEY(1, 3, KEY_R),
+	KEY(1, 4, KEY_Y),
+	KEY(1, 5, KEY_8),
+	KEY(1, 6, KEY_I),
+	KEY(1, 7, KEY_O),
+	KEY(1, 8, KEY_P),
+	KEY(1, 9, SPITZ_KEY_EXJOGDOWN),	/* EXJOGDOWN */
+	KEY(1, 10, SPITZ_KEY_EXJOGUP),	/* EXJOGUP */
+	KEY(2, 0, KEY_TAB),
+	KEY(2, 1, KEY_Q),
+	KEY(2, 2, KEY_E),
+	KEY(2, 3, KEY_T),
+	KEY(2, 4, KEY_G),
+	KEY(2, 5, KEY_U),
+	KEY(2, 6, KEY_J),
+	KEY(2, 7, KEY_K),
+	KEY(3, 0, SPITZ_KEY_ADDRESS),	/* ADDRESS */
+	KEY(3, 1, KEY_W),
+	KEY(3, 2, KEY_S),
+	KEY(3, 3, KEY_F),
+	KEY(3, 4, KEY_V),
+	KEY(3, 5, KEY_H),
+	KEY(3, 6, KEY_M),
+	KEY(3, 7, KEY_L),
+	KEY(3, 9, KEY_RIGHTSHIFT),
+	KEY(4, 0, SPITZ_KEY_CALENDAR),	/* CALENDAR */
+	KEY(4, 1, KEY_A),
+	KEY(4, 2, KEY_D),
+	KEY(4, 3, KEY_C),
+	KEY(4, 4, KEY_B),
+	KEY(4, 5, KEY_N),
+	KEY(4, 6, KEY_DOT),
+	KEY(4, 8, KEY_ENTER),
+	KEY(4, 9, KEY_LEFTSHIFT),
+	KEY(5, 0, SPITZ_KEY_MAIL),	/* MAIL */
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_X),
+	KEY(5, 3, KEY_MINUS),
+	KEY(5, 4, KEY_SPACE),
+	KEY(5, 5, KEY_COMMA),
+	KEY(5, 7, KEY_UP),
+	KEY(5, 10, SPITZ_KEY_FN),	/* FN */
+	KEY(6, 0, KEY_SYSRQ),
+	KEY(6, 1, SPITZ_KEY_JAP1),	/* JAP1 */
+	KEY(6, 2, SPITZ_KEY_JAP2),	/* JAP2 */
+	KEY(6, 3, SPITZ_KEY_CANCEL),	/* CANCEL */
+	KEY(6, 4, SPITZ_KEY_OK),	/* OK */
+	KEY(6, 5, SPITZ_KEY_MENU),	/* MENU */
+	KEY(6, 6, KEY_LEFT),
+	KEY(6, 7, KEY_DOWN),
+	KEY(6, 8, KEY_RIGHT),
+};
+
+static const struct matrix_keymap_data spitzkbd_keymap_data = {
+	.keymap		= spitzkbd_keymap,
+	.keymap_size	= ARRAY_SIZE(spitzkbd_keymap),
+};
+
+static const uint32_t spitzkbd_row_gpios[] =
+		{ 12, 17, 91, 34, 36, 38, 39 };
+static const uint32_t spitzkbd_col_gpios[] =
+		{ 88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114 };
+
+static struct matrix_keypad_platform_data spitzkbd_pdata = {
+	.keymap_data		= &spitzkbd_keymap_data,
+	.row_gpios		= spitzkbd_row_gpios,
+	.col_gpios		= spitzkbd_col_gpios,
+	.num_row_gpios		= ARRAY_SIZE(spitzkbd_row_gpios),
+	.num_col_gpios		= ARRAY_SIZE(spitzkbd_col_gpios),
+	.col_scan_delay_us	= 10,
+	.debounce_ms		= 10,
+	.wakeup			= 1,
+};
+
 static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
+	.name		= "matrix-keypad",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitzkbd_pdata,
+	},
 };
 
 
@@ -296,6 +423,7 @@
 	.vref_delay_usecs	= 100,
 	.x_plate_ohms		= 419,
 	.y_plate_ohms		= 486,
+	.pressure_max		= 1024,
 	.gpio_pendown		= SPITZ_GPIO_TP_INT,
 	.wait_for_sync		= spitz_wait_for_hsync,
 };
@@ -378,45 +506,6 @@
  * The card detect interrupt isn't debounced so we delay it by 250ms
  * to give the card a chance to fully insert/eject.
  */
-
-static struct pxamci_platform_data spitz_mci_platform_data;
-
-static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, void *data)
-{
-	int err;
-
-	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
-	if (err)
-		goto err_out;
-
-	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
-	if (err)
-		goto err_free_1;
-
-	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
-	gpio_direction_input(SPITZ_GPIO_nSD_WP);
-
-	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
-			  IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
-				__func__);
-		goto err_free_2;
-	}
-	return 0;
-
-err_free_2:
-	gpio_free(SPITZ_GPIO_nSD_WP);
-err_free_1:
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-err_out:
-	return err;
-}
-
 static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
@@ -427,24 +516,12 @@
 		spitz_card_pwr_ctrl(SPITZ_PWR_SD, 0x0000);
 }
 
-static int spitz_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(SPITZ_GPIO_nSD_WP);
-}
-
-static void spitz_mci_exit(struct device *dev, void *data)
-{
-	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(SPITZ_GPIO_nSD_WP);
-	gpio_free(SPITZ_GPIO_nSD_DETECT);
-}
-
 static struct pxamci_platform_data spitz_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= spitz_mci_init,
-	.get_ro		= spitz_mci_get_ro,
-	.setpower 	= spitz_mci_setpower,
-	.exit		= spitz_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.setpower 		= spitz_mci_setpower,
+	.gpio_card_detect	= SPITZ_GPIO_nSD_DETECT,
+	.gpio_card_ro		= SPITZ_GPIO_nSD_WP,
+	.gpio_power		= -1,
 };
 
 
@@ -484,50 +561,10 @@
 /*
  * Irda
  */
-static int spitz_irda_startup(struct device *dev)
-{
-	int rc;
-
-	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
-	if (rc)
-		goto err;
-
-	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
-	if (rc)
-		goto err_dir;
-
-	return 0;
-
-err_dir:
-	gpio_free(SPITZ_GPIO_IR_ON);
-err:
-	return rc;
-}
-
-static void spitz_irda_shutdown(struct device *dev)
-{
-	gpio_free(SPITZ_GPIO_IR_ON);
-}
-
-static void spitz_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-#ifdef CONFIG_MACH_AKITA
-static void akita_irda_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-#endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
+/* .gpio_pwdown is set in spitz_init() and akita_init() accordingly */
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
-	.transceiver_mode	= spitz_irda_transceiver_mode,
-	.startup		= spitz_irda_startup,
-	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -695,6 +732,7 @@
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
+	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
@@ -705,6 +743,8 @@
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
 static void __init spitz_init(void)
 {
+	spitz_ficp_platform_data.gpio_pwdown = SPITZ_GPIO_IR_ON;
+
 	platform_scoop_config = &spitz_pcmcia_config;
 
 	common_init();
@@ -747,7 +787,7 @@
 
 static void __init akita_init(void)
 {
-	spitz_ficp_platform_data.transceiver_mode = akita_irda_transceiver_mode;
+	spitz_ficp_platform_data.gpio_pwdown = AKITA_GPIO_IR_ON;
 
 	sharpsl_nand_platform_data.badblock_pattern = &sharpsl_akita_bbt;
 	sharpsl_nand_platform_data.ecc_layout = &akita_oobinfo;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 117ad59..e81a526 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -247,49 +247,10 @@
 /*
  * MMC/SD Device
  */
-static struct pxamci_platform_data tosa_mci_platform_data;
-
 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
 {
 	int err;
 
-	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
-
-	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
-		goto err_gpio_detect;
-	}
-	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
-	if (err)
-		goto err_gpio_detect_dir;
-
-	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				"MMC/SD card detect", data);
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-		goto err_irq;
-	}
-
-	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
-		goto err_gpio_wp;
-	}
-	err = gpio_direction_input(TOSA_GPIO_SD_WP);
-	if (err)
-		goto err_gpio_wp_dir;
-
-	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
-	if (err) {
-		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
-		goto err_gpio_pwr;
-	}
-	err = gpio_direction_output(TOSA_GPIO_PWR_ON, 0);
-	if (err)
-		goto err_gpio_pwr_dir;
-
 	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
@@ -304,51 +265,21 @@
 err_gpio_int_dir:
 	gpio_free(TOSA_GPIO_nSD_INT);
 err_gpio_int:
-err_gpio_pwr_dir:
-	gpio_free(TOSA_GPIO_PWR_ON);
-err_gpio_pwr:
-err_gpio_wp_dir:
-	gpio_free(TOSA_GPIO_SD_WP);
-err_gpio_wp:
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-err_irq:
-err_gpio_detect_dir:
-	gpio_free(TOSA_GPIO_nSD_DETECT);
-err_gpio_detect:
 	return err;
 }
 
-static void tosa_mci_setpower(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 1);
-	} else {
-		gpio_set_value(TOSA_GPIO_PWR_ON, 0);
-	}
-}
-
-static int tosa_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(TOSA_GPIO_SD_WP);
-}
-
 static void tosa_mci_exit(struct device *dev, void *data)
 {
 	gpio_free(TOSA_GPIO_nSD_INT);
-	gpio_free(TOSA_GPIO_PWR_ON);
-	gpio_free(TOSA_GPIO_SD_WP);
-	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
-	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
-	.ocr_mask       = MMC_VDD_32_33|MMC_VDD_33_34,
-	.init           = tosa_mci_init,
-	.get_ro		= tosa_mci_get_ro,
-	.setpower       = tosa_mci_setpower,
-	.exit           = tosa_mci_exit,
+	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init           	= tosa_mci_init,
+	.exit           	= tosa_mci_exit,
+	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
+	.gpio_card_ro		= TOSA_GPIO_SD_WP,
+	.gpio_power		= TOSA_GPIO_PWR_ON,
 };
 
 /*
@@ -406,10 +337,11 @@
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = tosa_irda_transceiver_mode,
-	.startup = tosa_irda_startup,
-	.shutdown = tosa_irda_shutdown,
+	.gpio_pwdown		= -1,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= tosa_irda_transceiver_mode,
+	.startup		= tosa_irda_startup,
+	.shutdown		= tosa_irda_shutdown,
 };
 
 /*
@@ -910,6 +842,7 @@
 	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
 	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
 
+	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/treo680.c
index 753ec4d..fe08507 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/treo680.c
@@ -153,87 +153,11 @@
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
-static int treo680_mci_init(struct device *dev,
-		irq_handler_t treo680_detect_int, void *data)
-{
-	int err = 0;
-
-	/* Setup an interrupt for detecting card insert/remove events */
-	err = gpio_request(GPIO_NR_TREO680_SD_DETECT_N, "SD IRQ");
-
-	if (err)
-		goto err;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_DETECT_N);
-	if (err)
-		goto err2;
-
-	err = request_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N),
-			treo680_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
-			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
-			"SD/MMC card detect", data);
-
-	if (err) {
-		dev_err(dev, "%s: cannot request SD/MMC card detect IRQ\n",
-			     __func__);
-		goto err2;
-	}
-
-	err = gpio_request(GPIO_NR_TREO680_SD_POWER, "SD_POWER");
-	if (err)
-		goto err3;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_SD_POWER, 1);
-	if (err)
-		goto err4;
-
-	err = gpio_request(GPIO_NR_TREO680_SD_READONLY, "SD_READONLY");
-	if (err)
-		goto err4;
-
-	err = gpio_direction_input(GPIO_NR_TREO680_SD_READONLY);
-	if (err)
-		goto err5;
-
-	return 0;
-
-err5:
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-err4:
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-err3:
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-err2:
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-err:
-	return err;
-}
-
-static void treo680_mci_exit(struct device *dev, void *data)
-{
-	gpio_free(GPIO_NR_TREO680_SD_READONLY);
-	gpio_free(GPIO_NR_TREO680_SD_POWER);
-	free_irq(gpio_to_irq(GPIO_NR_TREO680_SD_DETECT_N), data);
-	gpio_free(GPIO_NR_TREO680_SD_DETECT_N);
-}
-
-static void treo680_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data *p_d = dev->platform_data;
-	gpio_set_value(GPIO_NR_TREO680_SD_POWER, p_d->ocr_mask & (1 << vdd));
-}
-
-static int treo680_mci_get_ro(struct device *dev)
-{
-	return gpio_get_value(GPIO_NR_TREO680_SD_READONLY);
-}
-
 static struct pxamci_platform_data treo680_mci_platform_data = {
-	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.setpower	= treo680_mci_power,
-	.get_ro		= treo680_mci_get_ro,
-	.init 		= treo680_mci_init,
-	.exit		= treo680_mci_exit,
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
+	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
 
 /******************************************************************************
@@ -330,16 +254,9 @@
 	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
 	if (ret)
 		goto err2;
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
-	if (ret)
-		goto err2;
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
-	if (ret)
-		goto err3;
 
 	return 0;
-err3:
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
+
 err2:
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
 err:
@@ -355,7 +272,6 @@
 static void treo680_backlight_exit(struct device *dev)
 {
 	gpio_free(GPIO_NR_TREO680_BL_POWER);
-	gpio_free(GPIO_NR_TREO680_LCD_POWER);
 }
 
 static struct platform_pwm_backlight_data treo680_backlight_data = {
@@ -379,44 +295,9 @@
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static void treo680_transceiver_mode(struct device *dev, int mode)
-{
-	gpio_set_value(GPIO_NR_TREO680_IR_EN, mode & IR_OFF);
-	pxa2xx_transceiver_mode(dev, mode);
-}
-
-static int treo680_irda_startup(struct device *dev)
-{
-	int err;
-
-	err = gpio_request(GPIO_NR_TREO680_IR_EN, "Ir port disable");
-	if (err)
-		goto err1;
-
-	err = gpio_direction_output(GPIO_NR_TREO680_IR_EN, 1);
-	if (err)
-		goto err2;
-
-	return 0;
-
-err2:
-	dev_err(dev, "treo680_irda: cannot change IR gpio direction\n");
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-err1:
-	dev_err(dev, "treo680_irda: cannot allocate IR gpio\n");
-	return err;
-}
-
-static void treo680_irda_shutdown(struct device *dev)
-{
-	gpio_free(GPIO_NR_TREO680_IR_EN);
-}
-
 static struct pxaficp_platform_data treo680_ficp_info = {
-	.transceiver_cap  = IR_FIRMODE | IR_SIRMODE | IR_OFF,
-	.startup          = treo680_irda_startup,
-	.shutdown         = treo680_irda_shutdown,
-	.transceiver_mode = treo680_transceiver_mode,
+	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
@@ -546,6 +427,11 @@
 },
 };
 
+static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+{
+	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+}
+
 static struct pxafb_mach_info treo680_lcd_screen = {
 	.modes		= treo680_lcd_modes,
 	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
@@ -585,11 +471,32 @@
 	}
 }
 
+static void __init treo680_lcd_power_init(void)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	if (ret) {
+		pr_err("Treo680: LCD power GPIO request failed!\n");
+		return;
+	}
+
+	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	if (ret) {
+		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
+		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		return;
+	}
+
+	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+}
+
 static void __init treo680_init(void)
 {
 	treo680_pm_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
 	pxa_set_keypad_info(&treo680_keypad_platform_data);
+	treo680_lcd_power_init();
 	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
 	treo680_udc_init();
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 825f540..3981e03 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -367,6 +367,9 @@
 	.exit		= trizeps4_mci_exit,
 	.get_ro		= NULL,	/* write-protection not supported */
 	.setpower 	= NULL,	/* power-switching not supported */
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 /****************************************************************************
@@ -412,6 +415,7 @@
 }
 
 static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.gpio_pwdown		= -1,
 	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
 	.transceiver_mode	= trizeps4_irda_transceiver_mode,
 	.startup		= trizeps4_irda_startup,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
new file mode 100644
index 0000000..3fd79cb
--- /dev/null
+++ b/arch/arm/mach-pxa/xcep.c
@@ -0,0 +1,187 @@
+/*  linux/arch/arm/mach-pxa/xcep.c
+ *
+ *  Support for the Iskratel Electronics XCEP platform as used in
+ *  the Libera instruments from Instrumentation Technologies.
+ *
+ *  Author:     Ales Bardorfer <ales@i-tech.si>
+ *  Contributions by: Abbott, MG (Michael) <michael.abbott@diamond.ac.uk>
+ *  Contributions by: Matej Kenda <matej.kenda@i-tech.si>
+ *  Created:    June 2006
+ *  Copyright:  (C) 2006-2009 Instrumentation Technologies
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+
+#include "generic.h"
+
+#define XCEP_ETH_PHYS		(PXA_CS3_PHYS + 0x00000300)
+#define XCEP_ETH_PHYS_END	(PXA_CS3_PHYS + 0x000fffff)
+#define XCEP_ETH_ATTR		(PXA_CS3_PHYS + 0x02000000)
+#define XCEP_ETH_ATTR_END	(PXA_CS3_PHYS + 0x020fffff)
+#define XCEP_ETH_IRQ		IRQ_GPIO0
+
+/*  XCEP CPLD base */
+#define XCEP_CPLD_BASE		0xf0000000
+
+
+/* Flash partitions. */
+
+static struct mtd_partition xcep_partitions[] = {
+	{
+		.name =		"Bootloader",
+		.size =		0x00040000,
+		.offset =	0,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Bootloader ENV",
+		.size =		0x00040000,
+		.offset =	0x00040000,
+		.mask_flags =	MTD_WRITEABLE
+	}, {
+		.name =		"Kernel",
+		.size =		0x00100000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Rescue fs",
+		.size =		0x00280000,
+		.offset =	0x00180000,
+	}, {
+		.name =		"Filesystem",
+		.size =		MTDPART_SIZ_FULL,
+		.offset =	0x00400000
+	}
+};
+
+static struct physmap_flash_data xcep_flash_data[] = {
+	{
+		.width		= 4,		/* bankwidth in bytes */
+		.parts		= xcep_partitions,
+		.nr_parts	= ARRAY_SIZE(xcep_partitions)
+	}
+};
+
+static struct resource flash_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_32M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+	.name	= "physmap-flash",
+	.id	= 0,
+	.dev 	= {
+		.platform_data = xcep_flash_data,
+	},
+	.resource = &flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/* SMC LAN91C111 network controller. */
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= XCEP_ETH_PHYS,
+		.end	= XCEP_ETH_PHYS_END,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= XCEP_ETH_IRQ,
+		.end	= XCEP_ETH_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= "smc91x-attrib",
+		.start	= XCEP_ETH_ATTR,
+		.end	= XCEP_ETH_ATTR_END,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata xcep_smc91x_info = {
+	.flags	= SMC91X_USE_32BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &xcep_smc91x_info,
+	},
+};
+
+
+static struct platform_device *devices[] __initdata = {
+	&flash_device,
+	&smc91x_device,
+};
+
+
+/* We have to state that there are HWMON devices on the I2C bus on XCEP.
+ * Drivers for HWMON verify capabilities of the adapter when loading and
+ * refuse to attach if the adapter doesn't support HWMON class of devices.
+ * See also Documentation/i2c/porting-clients. */
+static struct i2c_pxa_platform_data xcep_i2c_platform_data  = {
+	.class = I2C_CLASS_HWMON
+};
+
+
+static mfp_cfg_t xcep_pin_config[] __initdata = {
+	GPIO79_nCS_3,	/* SMC 91C111 chip select. */
+	GPIO80_nCS_4,	/* CPLD chip select. */
+	/* SSP communication to MSP430 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO27_SSP1_EXTCLK
+};
+
+static void __init xcep_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
+
+	/* See Intel XScale Developer's Guide for details */
+	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
+	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
+	/* Set RDF and RDN to appropriate values (chip select 5 (fpga)) */
+	MSC2 = (MSC2 & 0xffff) | 0x72A00000;
+
+	platform_add_devices(ARRAY_AND_SIZE(devices));
+	pxa_set_i2c_info(&xcep_i2c_platform_data);
+}
+
+MACHINE_START(XCEP, "Iskratel XCEP")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.init_machine	= xcep_init,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 218d200..09784d3 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -290,6 +290,9 @@
 	.init 		= zylonite_mci_init,
 	.exit		= zylonite_mci_exit,
 	.get_ro		= zylonite_mci_ro,
+	.gpio_card_detect = -1,
+	.gpio_card_ro	= -1,
+	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index dc3519c5..a2083b6 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -30,6 +30,7 @@
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 #include <linux/ata_platform.h>
+#include <linux/amba/mmci.h>
 
 #include <asm/clkdev.h>
 #include <asm/system.h>
@@ -44,7 +45,6 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <asm/hardware/gic.h>
 
@@ -237,14 +237,14 @@
 	return readl(REALVIEW_SYSMCI) & mask;
 }
 
-struct mmc_platform_data realview_mmc0_plat_data = {
+struct mmci_platform_data realview_mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 17,
 	.gpio_cd	= 16,
 };
 
-struct mmc_platform_data realview_mmc1_plat_data = {
+struct mmci_platform_data realview_mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= realview_mmc_status,
 	.gpio_wp	= 19,
@@ -296,31 +296,31 @@
 
 static struct clk_lookup lookups[] = {
 	{	/* UART0 */
-		.dev_id		= "dev:f1",
+		.dev_id		= "dev:uart0",
 		.clk		= &ref24_clk,
 	}, {	/* UART1 */
-		.dev_id		= "dev:f2",
+		.dev_id		= "dev:uart1",
 		.clk		= &ref24_clk,
 	}, {	/* UART2 */
-		.dev_id		= "dev:f3",
+		.dev_id		= "dev:uart2",
 		.clk		= &ref24_clk,
 	}, {	/* UART3 */
-		.dev_id		= "fpga:09",
+		.dev_id		= "fpga:uart3",
 		.clk		= &ref24_clk,
 	}, {	/* KMI0 */
-		.dev_id		= "fpga:06",
+		.dev_id		= "fpga:kmi0",
 		.clk		= &ref24_clk,
 	}, {	/* KMI1 */
-		.dev_id		= "fpga:07",
+		.dev_id		= "fpga:kmi1",
 		.clk		= &ref24_clk,
 	}, {	/* MMC0 */
-		.dev_id		= "fpga:05",
+		.dev_id		= "fpga:mmc0",
 		.clk		= &ref24_clk,
 	}, {	/* EB:CLCD */
-		.dev_id		= "dev:20",
+		.dev_id		= "dev:clcd",
 		.clk		= &oscvco_clk,
 	}, {	/* PB:CLCD */
-		.dev_id		= "issp:20",
+		.dev_id		= "issp:clcd",
 		.clk		= &oscvco_clk,
 	}
 };
diff --git a/arch/arm/mach-realview/core.h b/arch/arm/mach-realview/core.h
index 59a337b..46cd6ac 100644
--- a/arch/arm/mach-realview/core.h
+++ b/arch/arm/mach-realview/core.h
@@ -47,8 +47,8 @@
 extern struct platform_device realview_flash_device;
 extern struct platform_device realview_cf_device;
 extern struct platform_device realview_i2c_device;
-extern struct mmc_platform_data realview_mmc0_plat_data;
-extern struct mmc_platform_data realview_mmc1_plat_data;
+extern struct mmci_platform_data realview_mmc0_plat_data;
+extern struct mmci_platform_data realview_mmc1_plat_data;
 extern struct clcd_board clcd_plat_data;
 extern void __iomem *gic_cpu_base_addr;
 extern void __iomem *timer0_va_base;
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index abd13b4..1d65e64 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-eb.h>
@@ -193,27 +193,27 @@
 #define EB_SSP_DMA	{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,  "fpga:04", AACI,     NULL);
-AMBA_DEVICE(mmc0,  "fpga:05", MMCI0,    &realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,  "fpga:06", KMI0,     NULL);
-AMBA_DEVICE(kmi1,  "fpga:07", KMI1,     NULL);
-AMBA_DEVICE(uart3, "fpga:09", EB_UART3, NULL);
+AMBA_DEVICE(aaci,  "fpga:aaci",  AACI,     NULL);
+AMBA_DEVICE(mmc0,  "fpga:mmc0",  MMCI0,    &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,  "fpga:kmi0",  KMI0,     NULL);
+AMBA_DEVICE(kmi1,  "fpga:kmi1",  KMI1,     NULL);
+AMBA_DEVICE(uart3, "fpga:uart3", EB_UART3, NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,   "dev:00",  EB_SMC,   NULL);
-AMBA_DEVICE(clcd,  "dev:20",  EB_CLCD,  &clcd_plat_data);
-AMBA_DEVICE(dmac,  "dev:30",  DMAC,     NULL);
-AMBA_DEVICE(sctl,  "dev:e0",  SCTL,     NULL);
-AMBA_DEVICE(wdog,  "dev:e1",  EB_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0, "dev:e4",  EB_GPIO0, &gpio0_plat_data);
-AMBA_DEVICE(gpio1, "dev:e5",  GPIO1,    &gpio1_plat_data);
-AMBA_DEVICE(gpio2, "dev:e6",  GPIO2,    &gpio2_plat_data);
-AMBA_DEVICE(rtc,   "dev:e8",  EB_RTC,   NULL);
-AMBA_DEVICE(sci0,  "dev:f0",  SCI,      NULL);
-AMBA_DEVICE(uart0, "dev:f1",  EB_UART0, NULL);
-AMBA_DEVICE(uart1, "dev:f2",  EB_UART1, NULL);
-AMBA_DEVICE(uart2, "dev:f3",  EB_UART2, NULL);
-AMBA_DEVICE(ssp0,  "dev:f4",  EB_SSP,   NULL);
+AMBA_DEVICE(smc,   "dev:smc",   EB_SMC,   NULL);
+AMBA_DEVICE(clcd,  "dev:clcd",  EB_CLCD,  &clcd_plat_data);
+AMBA_DEVICE(dmac,  "dev:dmac",  DMAC,     NULL);
+AMBA_DEVICE(sctl,  "dev:sctl",  SCTL,     NULL);
+AMBA_DEVICE(wdog,  "dev:wdog",  EB_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:gpio0", EB_GPIO0, &gpio0_plat_data);
+AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1,    &gpio1_plat_data);
+AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2,    &gpio2_plat_data);
+AMBA_DEVICE(rtc,   "dev:rtc",   EB_RTC,   NULL);
+AMBA_DEVICE(sci0,  "dev:sci0",  SCI,      NULL);
+AMBA_DEVICE(uart0, "dev:uart0", EB_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:uart1", EB_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:uart2", EB_UART2, NULL);
+AMBA_DEVICE(ssp0,  "dev:ssp0",  EB_SSP,   NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 17fbb0e..2817fe0 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb1176.h>
@@ -170,29 +170,29 @@
 #define PB1176_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB1176_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB1176_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB1176_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB1176_WATCHDOG,	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB1176_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB1176_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB1176_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB1176_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB1176_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB1176_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB1176_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB1176_WATCHDOG,	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB1176_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB1176_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB1176_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB1176_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB1176_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB1176_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB1176_CLCD,	&clcd_plat_data);
-//AMBA_DEVICE(dmac,	"issp:30",	PB1176_DMAC,	NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB1176_CLCD,	&clcd_plat_data);
+//AMBA_DEVICE(dmac,	"issp:dmac",	PB1176_DMAC,	NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 //	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index fdd042b..94680fc 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/board-pb11mp.h>
@@ -172,29 +172,29 @@
 #define PB11MP_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PB11MP_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PB11MP_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PB11MP_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PB11MP_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PB11MP_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PB11MP_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PB11MP_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PB11MP_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PB11MP_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PB11MP_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PB11MP_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PB11MP_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PB11MP_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PB11MP_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PB11MP_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PB11MP_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PB11MP_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PB11MP_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PB11MP_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PB11MP_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 70bba99..941beb2 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
@@ -162,29 +162,29 @@
 #define PBA8_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBA8_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBA8_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBA8_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBA8_WATCHDOG, NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBA8_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBA8_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBA8_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBA8_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBA8_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBA8_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBA8_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBA8_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBA8_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBA8_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBA8_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBA8_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBA8_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBA8_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBA8_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBA8_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ce6c5d2..7e4bc6c 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -23,6 +23,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <asm/irq.h>
@@ -34,7 +35,6 @@
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 #include <asm/mach/time.h>
 
 #include <mach/hardware.h>
@@ -182,29 +182,29 @@
 #define PBX_SSP_DMA		{ 9, 8 }
 
 /* FPGA Primecells */
-AMBA_DEVICE(aaci,	"fpga:04",	AACI,		NULL);
-AMBA_DEVICE(mmc0,	"fpga:05",	MMCI0,		&realview_mmc0_plat_data);
-AMBA_DEVICE(kmi0,	"fpga:06",	KMI0,		NULL);
-AMBA_DEVICE(kmi1,	"fpga:07",	KMI1,		NULL);
-AMBA_DEVICE(uart3,	"fpga:09",	PBX_UART3,	NULL);
+AMBA_DEVICE(aaci,	"fpga:aaci",	AACI,		NULL);
+AMBA_DEVICE(mmc0,	"fpga:mmc0",	MMCI0,		&realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0,	"fpga:kmi0",	KMI0,		NULL);
+AMBA_DEVICE(kmi1,	"fpga:kmi1",	KMI1,		NULL);
+AMBA_DEVICE(uart3,	"fpga:uart3",	PBX_UART3,	NULL);
 
 /* DevChip Primecells */
-AMBA_DEVICE(smc,	"dev:00",	PBX_SMC,	NULL);
-AMBA_DEVICE(sctl,	"dev:e0",	SCTL,		NULL);
-AMBA_DEVICE(wdog,	"dev:e1",	PBX_WATCHDOG, 	NULL);
-AMBA_DEVICE(gpio0,	"dev:e4",	PBX_GPIO0,	&gpio0_plat_data);
-AMBA_DEVICE(gpio1,	"dev:e5",	GPIO1,		&gpio1_plat_data);
-AMBA_DEVICE(gpio2,	"dev:e6",	GPIO2,		&gpio2_plat_data);
-AMBA_DEVICE(rtc,	"dev:e8",	PBX_RTC,	NULL);
-AMBA_DEVICE(sci0,	"dev:f0",	SCI,		NULL);
-AMBA_DEVICE(uart0,	"dev:f1",	PBX_UART0,	NULL);
-AMBA_DEVICE(uart1,	"dev:f2",	PBX_UART1,	NULL);
-AMBA_DEVICE(uart2,	"dev:f3",	PBX_UART2,	NULL);
-AMBA_DEVICE(ssp0,	"dev:f4",	PBX_SSP,	NULL);
+AMBA_DEVICE(smc,	"dev:smc",	PBX_SMC,	NULL);
+AMBA_DEVICE(sctl,	"dev:sctl",	SCTL,		NULL);
+AMBA_DEVICE(wdog,	"dev:wdog",	PBX_WATCHDOG, 	NULL);
+AMBA_DEVICE(gpio0,	"dev:gpio0",	PBX_GPIO0,	&gpio0_plat_data);
+AMBA_DEVICE(gpio1,	"dev:gpio1",	GPIO1,		&gpio1_plat_data);
+AMBA_DEVICE(gpio2,	"dev:gpio2",	GPIO2,		&gpio2_plat_data);
+AMBA_DEVICE(rtc,	"dev:rtc",	PBX_RTC,	NULL);
+AMBA_DEVICE(sci0,	"dev:sci0",	SCI,		NULL);
+AMBA_DEVICE(uart0,	"dev:uart0",	PBX_UART0,	NULL);
+AMBA_DEVICE(uart1,	"dev:uart1",	PBX_UART1,	NULL);
+AMBA_DEVICE(uart2,	"dev:uart2",	PBX_UART2,	NULL);
+AMBA_DEVICE(ssp0,	"dev:ssp0",	PBX_SSP,	NULL);
 
 /* Primecells on the NEC ISSP chip */
-AMBA_DEVICE(clcd,	"issp:20",	PBX_CLCD,	&clcd_plat_data);
-AMBA_DEVICE(dmac,	"issp:30",	DMAC,		NULL);
+AMBA_DEVICE(clcd,	"issp:clcd",	PBX_CLCD,	&clcd_plat_data);
+AMBA_DEVICE(dmac,	"issp:dmac",	DMAC,		NULL);
 
 static struct amba_device *amba_devs[] __initdata = {
 	&dmac_device,
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index d8c023d..3d4e9da 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -77,6 +77,7 @@
 	select CPU_S3C2410
 	select PM_H1940 if PM
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
@@ -89,6 +90,7 @@
 	bool "Acer N30 family"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you want suppt for the Acer N30, Acer N35,
 	  Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
@@ -103,6 +105,7 @@
 	select S3C24XX_DCLK
 	select ISA
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec Electronics EB2410ITX
 	  development board (also known as BAST)
@@ -111,6 +114,7 @@
  	bool "NexVision OTOM Board"
  	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision OTOM board
 
@@ -154,6 +158,7 @@
 	bool "QT2410"
 	select CPU_S3C2410
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	   Say Y here if you are using the Armzone QT2410
 
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index 35c1bde..c2bdc46 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -48,6 +48,7 @@
 	bool "Logitech Jive"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Logitech Jive.
 
@@ -61,6 +62,7 @@
 	select MACH_S3C2413
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an SMDK2413
 
@@ -84,6 +86,7 @@
 	bool "VMSTMS"
 	select CPU_S3C2412
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using an VSTMS board
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index 8ae1b28..d7bba91 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -48,6 +48,7 @@
 	select S3C2440_XTAL_12000000
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
@@ -57,6 +58,7 @@
 	select CPU_S3C2440
 	select S3C2440_XTAL_16934400
 	select PM_H1940 if PM
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the HP iPAQ rx3715.
 
@@ -66,6 +68,7 @@
 	select S3C2440_XTAL_16934400
 	select MACH_SMDK
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the SMDK2440.
 
@@ -74,6 +77,7 @@
  	select CPU_S3C2440
 	select S3C2440_XTAL_12000000
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
  	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
 
@@ -88,6 +92,7 @@
 	bool "Avantech AT2440EVB development board"
 	select CPU_S3C2440
 	select S3C_DEV_USB_HOST
+	select S3C_DEV_NAND
 	help
 	  Say Y here if you are using the AT2440EVB development board
 
@@ -97,6 +102,7 @@
 	select EEPROM_AT24
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
+	select S3C_DEV_NAND
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index f5af212..770b720 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -26,6 +26,7 @@
        bool "SMDK6400"
 	select CPU_S3C6400
 	select S3C_DEV_HSMMC
+	select S3C_DEV_NAND
 	select S3C6400_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDK6400
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index f9d0f09..53fc3ff 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -102,6 +102,7 @@
 	bool "Airgoo HMT"
 	select CPU_S3C6410
 	select S3C_DEV_FB
+	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
 	select S3C64XX_SETUP_FB_24BPP
 	select HAVE_PWM
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 81ffff7..4e5c07f 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -71,11 +71,6 @@
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
 	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
-config SA1100_H3XXX
-	bool
-	depends on SA1100_H3100 || SA1100_H3600
-	default y
-
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index 95f9c5a6..cb4521a 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -39,7 +39,7 @@
 
 static sa1100_dma_t dma_chan[SA1100_DMA_CHANNELS];
 
-static spinlock_t dma_list_lock;
+static DEFINE_SPINLOCK(dma_list_lock);
 
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
diff --git a/arch/arm/mach-sa1100/time.c b/arch/arm/mach-sa1100/time.c
index 95d92e8..b9cbb56 100644
--- a/arch/arm/mach-sa1100/time.c
+++ b/arch/arm/mach-sa1100/time.c
@@ -77,7 +77,7 @@
 	.set_mode	= sa1100_osmr0_set_mode,
 };
 
-static cycle_t sa1100_read_oscr(void)
+static cycle_t sa1100_read_oscr(struct clocksource *s)
 {
 	return OSCR;
 }
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 337b9aa..801b21e 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -81,6 +81,18 @@
 		Memory Interface) from both from access and application
 		side.
 
+config MACH_U300_SPIDUMMY
+	bool "SSP/SPI dummy chip"
+	select SPI
+	select SPI_MASTER
+	select SPI_PL022
+	help
+		This creates a small kernel module that creates a dummy
+		SPI device to be used for loopback tests. Regularly used
+		to test reference designs. If you're not testing SPI,
+		you don't need it. Selecting this will activate the
+		SPI framework and ARM PL022 support.
+
 comment "All the settings below must match the bootloader's settings"
 
 config MACH_U300_ACCESS_MEM_SIZE
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 24950e0..885b5c0 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -9,3 +9,6 @@
 
 obj-$(CONFIG_ARCH_U300)	          += u300.o
 obj-$(CONFIG_MMC)                 += mmc.o
+obj-$(CONFIG_SPI_PL022)           += spi.o
+obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
+obj-$(CONFIG_I2C_STU300)          += i2c.o
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 2e9b8cc..be60d6d 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -32,6 +32,8 @@
 
 #include "clock.h"
 #include "mmc.h"
+#include "spi.h"
+#include "i2c.h"
 
 /*
  * Static I/O mappings that are needed for booting the U300 platforms. The
@@ -378,14 +380,14 @@
 };
 
 static struct platform_device i2c0_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 0,
 	.num_resources = ARRAY_SIZE(i2c0_resources),
 	.resource = i2c0_resources,
 };
 
 static struct platform_device i2c1_device = {
-	.name = "stddci2c",
+	.name = "stu300",
 	.id = 1,
 	.num_resources = ARRAY_SIZE(i2c1_resources),
 	.resource = i2c1_resources,
@@ -611,6 +613,8 @@
 	/* Wait for the PLL208 to lock if not locked in yet */
 	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
 		 U300_SYSCON_CSR_PLL208_LOCK_IND));
+	/* Initialize SPI device with some board specifics */
+	u300_spi_init(&pl022_device);
 
 	/* Register the AMBA devices in the AMBA bus abstraction layer */
 	u300_clock_primecells();
@@ -622,6 +626,12 @@
 
 	u300_assign_physmem();
 
+	/* Register subdevices on the I2C buses */
+	u300_i2c_register_board_devices();
+
+	/* Register subdevices on the SPI bus */
+	u300_spi_register_board_devices();
+
 	/* Register the platform devices */
 	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
 
diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c
new file mode 100644
index 0000000..962f9de
--- /dev/null
+++ b/arch/arm/mach-u300/dummyspichip.c
@@ -0,0 +1,290 @@
+/*
+ * arch/arm/mach-u300/dummyspichip.c
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * This is a dummy loopback SPI "chip" used for testing SPI.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/sysfs.h>
+#include <linux/mutex.h>
+#include <linux/spi/spi.h>
+#include <linux/dma-mapping.h>
+/*
+ * WARNING! Do not include this pl022-specific controller header
+ * for any generic driver. It is only done in this dummy chip
+ * because we alter the chip configuration in order to test some
+ * different settings on the loopback device. Normal chip configs
+ * shall be STATIC and not altered by the driver!
+ */
+#include <linux/amba/pl022.h>
+
+struct dummy {
+	struct device *dev;
+	struct mutex lock;
+};
+
+#define DMA_TEST_SIZE 2048
+
+/* When we cat /sys/bus/spi/devices/spi0.0/looptest this will be triggered */
+static ssize_t dummy_looptest(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	/*
+	 * WARNING! Do not dereference the chip-specific data in any normal
+	 * driver for a chip. It is usually STATIC and shall not be read
+	 * or written to. Your chip driver should NOT depend on fields in this
+	 * struct, this is just used here to alter the behaviour of the chip
+	 * in order to perform tests.
+	 */
+	struct pl022_config_chip *chip_info = spi->controller_data;
+	int status;
+	u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD,
+			0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05,
+			0xF0, 0x0D};
+	u8 rxbuf[14];
+	u8 *bigtxbuf_virtual;
+	u8 *bigrxbuf_virtual;
+
+	if (mutex_lock_interruptible(&p_dummy->lock))
+		return -ERESTARTSYS;
+
+	bigtxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+	if (bigtxbuf_virtual == NULL) {
+		status = -ENOMEM;
+		goto out;
+	}
+	bigrxbuf_virtual = kmalloc(DMA_TEST_SIZE, GFP_KERNEL);
+
+	/* Fill TXBUF with some happy pattern */
+	memset(bigtxbuf_virtual, 0xAA, DMA_TEST_SIZE);
+
+	/*
+	 * Force chip to 8 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_8;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	/* Now run the tests for 8bit mode */
+	pr_info("Simple test 1: write 0xAA byte, read back garbage byte "
+		"in 8bit mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status < 0)
+		pr_warning("Siple test 1: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 1: SUCCESS!\n");
+
+	pr_info("Simple test 2: write 8 bytes, read back 8 bytes garbage "
+		"in 8bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 2: SUCCESS!\n");
+
+	pr_info("Simple test 3: write 14 bytes, read back 14 bytes garbage "
+		"in 8bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 3: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 3: SUCCESS!\n");
+
+	pr_info("Simple test 4: write 8 bytes with spi_write(), read 8 "
+		"bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 4 step 2: SUCCESS!\n");
+
+	pr_info("Simple test 5: write 14 bytes with spi_write(), read "
+		"14 bytes garbage with spi_read() in 8bit mode\n");
+	status = spi_write(spi, &txbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5 step 1: SUCCESS!\n");
+	status = spi_read(spi, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 5: SUCCESS!\n");
+
+	pr_info("Simple test 6: write %d bytes with spi_write(), "
+		"read %d bytes garbage with spi_read() in 8bit mode\n",
+		DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6 step 1: SUCCESS!\n");
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 6: SUCCESS!\n");
+
+
+	/*
+	 * Force chip to 16 bit mode
+	 * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC!
+	 */
+	chip_info->data_size = SSP_DATA_BITS_16;
+	/* You should NOT DO THIS EITHER */
+	spi->master->setup(spi);
+
+	pr_info("Simple test 7: write 0xAA byte, read back garbage byte "
+		"in 16bit bus mode\n");
+	status = spi_w8r8(spi, 0xAA);
+	if (status == -EIO)
+		pr_info("Simple test 7: SUCCESS! (expected failure with "
+			"status EIO)\n");
+	else if (status < 0)
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "failed with status %d\n", status);
+	else
+		pr_warning("Siple test 7: FAILURE: spi_write_then_read "
+			   "succeeded but it was expected to fail!\n");
+
+	pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
+		"in 16bit mode (full FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
+	if (status < 0)
+		pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
+			   "failed with status %d\n", status);
+	else
+		pr_info("Simple test 8: SUCCESS!\n");
+
+	pr_info("Simple test 9: write 14 bytes, read back 14 bytes garbage "
+		"in 16bit mode (see if we overflow FIFO)\n");
+	status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
+	if (status < 0)
+		pr_warning("Simple test 9: FAILURE: failed with status %d "
+			   "(probably FIFO overrun)\n", status);
+	else
+		pr_info("Simple test 9: SUCCESS!\n");
+
+	pr_info("Simple test 10: write %d bytes with spi_write(), "
+	       "read %d bytes garbage with spi_read() in 16bit mode\n",
+	       DMA_TEST_SIZE, DMA_TEST_SIZE);
+	status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10 step 1: SUCCESS!\n");
+
+	status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
+	if (status < 0)
+		pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
+			   "failed with status %d (probably FIFO overrun)\n",
+			   status);
+	else
+		pr_info("Simple test 10: SUCCESS!\n");
+
+	status = sprintf(buf, "loop test complete\n");
+	kfree(bigrxbuf_virtual);
+	kfree(bigtxbuf_virtual);
+ out:
+	mutex_unlock(&p_dummy->lock);
+	return status;
+}
+
+static DEVICE_ATTR(looptest, S_IRUGO, dummy_looptest, NULL);
+
+static int __devinit pl022_dummy_probe(struct spi_device *spi)
+{
+	struct dummy *p_dummy;
+	int status;
+
+	dev_info(&spi->dev, "probing dummy SPI device\n");
+
+	p_dummy = kzalloc(sizeof *p_dummy, GFP_KERNEL);
+	if (!p_dummy)
+		return -ENOMEM;
+
+	dev_set_drvdata(&spi->dev, p_dummy);
+	mutex_init(&p_dummy->lock);
+
+	/* sysfs hook */
+	status = device_create_file(&spi->dev, &dev_attr_looptest);
+	if (status) {
+		dev_dbg(&spi->dev, "device_create_file looptest failure.\n");
+		goto out_dev_create_looptest_failed;
+	}
+
+	return 0;
+
+out_dev_create_looptest_failed:
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+	return status;
+}
+
+static int __devexit pl022_dummy_remove(struct spi_device *spi)
+{
+	struct dummy *p_dummy = dev_get_drvdata(&spi->dev);
+
+	dev_info(&spi->dev, "removing dummy SPI device\n");
+	device_remove_file(&spi->dev, &dev_attr_looptest);
+	dev_set_drvdata(&spi->dev, NULL);
+	kfree(p_dummy);
+
+	return 0;
+}
+
+static struct spi_driver pl022_dummy_driver = {
+	.driver = {
+		.name	= "spi-dummy",
+		.owner	= THIS_MODULE,
+	},
+	.probe	= pl022_dummy_probe,
+	.remove	= __devexit_p(pl022_dummy_remove),
+};
+
+static int __init pl022_init_dummy(void)
+{
+	return spi_register_driver(&pl022_dummy_driver);
+}
+
+static void __exit pl022_exit_dummy(void)
+{
+	spi_unregister_driver(&pl022_dummy_driver);
+}
+
+module_init(pl022_init_dummy);
+module_exit(pl022_exit_dummy);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP/SPI DUMMY Linux driver");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-u300/gpio.c b/arch/arm/mach-u300/gpio.c
index 308cdb1..0b35826 100644
--- a/arch/arm/mach-u300/gpio.c
+++ b/arch/arm/mach-u300/gpio.c
@@ -25,11 +25,6 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 
-/* Need access to SYSCON registers for PADmuxing */
-#include <mach/syscon.h>
-
-#include "padmux.h"
-
 /* Reference to GPIO block clock */
 static struct clk *clk;
 
@@ -286,6 +281,16 @@
 }
 EXPORT_SYMBOL(gpio_unregister_callback);
 
+/* Non-zero means valid */
+int gpio_is_valid(int number)
+{
+	if (number >= 0 &&
+	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
+		return 1;
+	return 0;
+}
+EXPORT_SYMBOL(gpio_is_valid);
+
 int gpio_request(unsigned gpio, const char *label)
 {
 	if (gpio_pin[gpio].users)
@@ -606,14 +611,6 @@
 	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
 #endif
 
-	/* Set up some padmuxing here */
-#ifdef CONFIG_MMC
-	pmx_set_mission_mode_mmc();
-#endif
-#ifdef CONFIG_SPI_PL022
-	pmx_set_mission_mode_spi();
-#endif
-
 	gpio_set_initial_values();
 
 	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
new file mode 100644
index 0000000..10be1f8
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.c
@@ -0,0 +1,43 @@
+/*
+ * arch/arm/mach-u300/i2c.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <mach/irqs.h>
+
+static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
+	{
+		.type = "ab3100",
+		.addr = 0x48,
+		.irq = IRQ_U300_IRQ0_EXT,
+	},
+};
+
+static struct i2c_board_info __initdata bus1_i2c_board_info[] = {
+#ifdef CONFIG_MACH_U300_BS335
+	{
+		.type = "fwcam",
+		.addr = 0x10,
+	},
+	{
+		.type = "fwcam",
+		.addr = 0x5d,
+	},
+#else
+	{ },
+#endif
+};
+
+void __init u300_i2c_register_board_devices(void)
+{
+	i2c_register_board_info(0, bus0_i2c_board_info,
+				ARRAY_SIZE(bus0_i2c_board_info));
+	i2c_register_board_info(1, bus1_i2c_board_info,
+				ARRAY_SIZE(bus1_i2c_board_info));
+}
diff --git a/arch/arm/mach-u300/i2c.h b/arch/arm/mach-u300/i2c.h
new file mode 100644
index 0000000..485c02e
--- /dev/null
+++ b/arch/arm/mach-u300/i2c.h
@@ -0,0 +1,23 @@
+/*
+ * arch/arm/mach-u300/i2c.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Register board i2c devices
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef MACH_U300_I2C_H
+#define MACH_U300_I2C_H
+
+#ifdef CONFIG_I2C_STU300
+void __init u300_i2c_register_board_devices(void);
+#else
+/* Compile out this stuff if no I2C adapter is available */
+static inline void __init u300_i2c_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index c817412..7b1fc98 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -258,6 +258,7 @@
 #define PIN_TO_PORT(val) (val >> 3)
 
 /* These can be found in arch/arm/mach-u300/gpio.c */
+extern int gpio_is_valid(int number);
 extern int gpio_request(unsigned gpio, const char *label);
 extern void gpio_free(unsigned gpio);
 extern int gpio_direction_input(unsigned gpio);
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index bf134bc..ab000df 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -35,6 +35,14 @@
 #endif
 
 /*
+ * TCM memory whereabouts
+ */
+#define ITCM_OFFSET	0xffff2000
+#define ITCM_END	0xffff3fff
+#define DTCM_OFFSET	0xffff4000
+#define DTCM_END	0xffff5fff
+
+/*
  * We enable a real big DMA buffer if need be.
  */
 #define CONSISTENT_DMA_SIZE SZ_4M
diff --git a/arch/arm/mach-u300/include/mach/syscon.h b/arch/arm/mach-u300/include/mach/syscon.h
index 1c90d1b..7444f5c 100644
--- a/arch/arm/mach-u300/include/mach/syscon.h
+++ b/arch/arm/mach-u300/include/mach/syscon.h
@@ -240,8 +240,13 @@
 #define U300_SYSCON_PMC1LR_CDI_MASK				(0xC000)
 #define U300_SYSCON_PMC1LR_CDI_CDI				(0x0000)
 #define U300_SYSCON_PMC1LR_CDI_EMIF				(0x4000)
+#ifdef CONFIG_MACH_U300_BS335
+#define U300_SYSCON_PMC1LR_CDI_CDI2				(0x8000)
+#define U300_SYSCON_PMC1LR_CDI_WCDMA_APP_GPIO			(0xC000)
+#elif CONFIG_MACH_U300_BS365
 #define U300_SYSCON_PMC1LR_CDI_GPIO				(0x8000)
 #define U300_SYSCON_PMC1LR_CDI_WCDMA				(0xC000)
+#endif
 #define U300_SYSCON_PMC1LR_PDI_MASK				(0x3000)
 #define U300_SYSCON_PMC1LR_PDI_PDI				(0x0000)
 #define U300_SYSCON_PMC1LR_PDI_EGG				(0x1000)
@@ -345,19 +350,69 @@
 #define U300_SYSCON_MMCR_MASK					(0x0003)
 #define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE			(0x0002)
 #define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE			(0x0001)
-
+/* Pull up/down control (R/W) */
+#define U300_SYSCON_PUCR					(0x104)
+#define U300_SYSCON_PUCR_EMIF_1_WAIT_N_PU_ENABLE		(0x0200)
+#define U300_SYSCON_PUCR_EMIF_1_NFIF_READY_PU_ENABLE		(0x0100)
+#define U300_SYSCON_PUCR_EMIF_1_16BIT_PU_ENABLE			(0x0080)
+#define U300_SYSCON_PUCR_EMIF_1_8BIT_PU_ENABLE			(0x0040)
+#define U300_SYSCON_PUCR_KEY_IN_PU_EN_MASK			(0x003F)
+/* Padmux 2 control */
+#define U300_SYSCON_PMC2R					(0x100)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MASK			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_0_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_0_EMIF_SDRAM			(0x0040)
+#define U300_SYSCON_PMC2R_APP_MISC_0_MMC			(0x0080)
+#define U300_SYSCON_PMC2R_APP_MISC_0_CDI2			(0x00C0)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MASK			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_1_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_1_EMIF_SDRAM			(0x0100)
+#define U300_SYSCON_PMC2R_APP_MISC_1_MMC			(0x0200)
+#define U300_SYSCON_PMC2R_APP_MISC_1_CDI2			(0x0300)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MASK			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_2_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_2_EMIF_SDRAM			(0x0400)
+#define U300_SYSCON_PMC2R_APP_MISC_2_MMC			(0x0800)
+#define U300_SYSCON_PMC2R_APP_MISC_2_CDI2			(0x0C00)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MASK			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_EMIF_SDRAM			(0x1000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_MMC			(0x2000)
+#define U300_SYSCON_PMC2R_APP_MISC_3_CDI2			(0x3000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MASK			(0xC000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_EMIF_SDRAM			(0x4000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_MMC			(0x8000)
+#define U300_SYSCON_PMC2R_APP_MISC_4_ACC_GPIO			(0xC000)
 /* TODO: More SYSCON registers missing */
 #define U300_SYSCON_PMC3R					(0x10c)
 #define U300_SYSCON_PMC3R_APP_MISC_11_MASK			(0xc000)
 #define U300_SYSCON_PMC3R_APP_MISC_11_SPI			(0x4000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_MASK			(0x3000)
 #define U300_SYSCON_PMC3R_APP_MISC_10_SPI			(0x1000)
-/* TODO: Missing other configs, I just added the SPI stuff */
-
+/* TODO: Missing other configs */
+#define U300_SYSCON_PMC4R					(0x168)
+#define U300_SYSCON_PMC4R_APP_MISC_12_MASK			(0x0003)
+#define U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_MASK			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_13_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA			(0x0004)
+#define U300_SYSCON_PMC4R_APP_MISC_13_SMIA2			(0x0008)
+#define U300_SYSCON_PMC4R_APP_MISC_13_APP_GPIO			(0x000C)
+#define U300_SYSCON_PMC4R_APP_MISC_14_MASK			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI			(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_14_SMIA			(0x0010)
+#define U300_SYSCON_PMC4R_APP_MISC_14_CDI2			(0x0020)
+#define U300_SYSCON_PMC4R_APP_MISC_14_APP_GPIO			(0x0030)
+#define U300_SYSCON_PMC4R_APP_MISC_16_MASK			(0x0300)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_GPIO_13		(0x0000)
+#define U300_SYSCON_PMC4R_APP_MISC_16_APP_UART1_CTS		(0x0100)
+#define U300_SYSCON_PMC4R_APP_MISC_16_EMIF_1_STATIC_CS5_N	(0x0200)
 /* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */
 #define U300_SYSCON_S0CCR					(0x120)
 #define U300_SYSCON_S0CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S0CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S0CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -375,6 +430,7 @@
 #define U300_SYSCON_S1CCR					(0x124)
 #define U300_SYSCON_S1CCR_FIELD_MASK				(0x43FF)
 #define U300_SYSCON_S1CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S1CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -393,6 +449,7 @@
 #define U300_SYSCON_S2CCR_FIELD_MASK				(0xC3FF)
 #define U300_SYSCON_S2CCR_CLK_STEAL				(0x8000)
 #define U300_SYSCON_S2CCR_CLOCK_REQ				(0x4000)
+#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR			(0x2000)
 #define U300_SYSCON_S2CCR_CLOCK_INV				(0x0200)
 #define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK			(0x01E0)
 #define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK			(0x001E)
@@ -425,6 +482,44 @@
 #define U300_SYSCON_MCR_PMGEN_CR_0_EMIF_0_SDRAM			(0x000C)
 #define U300_SYSCON_MCR_PM1G_MODE_ENABLE			(0x0002)
 #define U300_SYSCON_MCR_PMTG5_MODE_ENABLE			(0x0001)
+/* SC_PLL_IRQ_CONTROL 16bit (R/W) */
+#define U300_SYSCON_PICR					(0x0130)
+#define U300_SYSCON_PICR_MASK					(0x00FF)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE		(0x0080)
+#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE		(0x0040)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE		(0x0020)
+#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE		(0x0010)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE		(0x0008)
+#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE		(0x0004)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE		(0x0002)
+#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE		(0x0001)
+/* SC_PLL_IRQ_STATUS 16 bit (R/-) */
+#define U300_SYSCON_PISR					(0x0134)
+#define U300_SYSCON_PISR_MASK					(0x000F)
+#define U300_SYSCON_PISR_PLL13_UNLOCK_IND			(0x0008)
+#define U300_SYSCON_PISR_PLL13_LOCK_IND				(0x0004)
+#define U300_SYSCON_PISR_PLL208_UNLOCK_IND			(0x0002)
+#define U300_SYSCON_PISR_PLL208_LOCK_IND			(0x0001)
+/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */
+#define U300_SYSCON_PICLR					(0x0138)
+#define U300_SYSCON_PICLR_MASK					(0x000F)
+#define U300_SYSCON_PICLR_RWMASK				(0x0000)
+#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC			(0x0008)
+#define U300_SYSCON_PICLR_PLL13_LOCK_SC				(0x0004)
+#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC			(0x0002)
+#define U300_SYSCON_PICLR_PLL208_LOCK_SC			(0x0001)
+/* CAMIF_CONTROL 16 bit (-/W) */
+#define U300_SYSCON_CICR					(0x013C)
+#define U300_SYSCON_CICR_MASK					(0x0FFF)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_MASK		(0x0F00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT1		(0x0C00)
+#define U300_SYSCON_CICR_APP_SUBLVDS_TESTMODE_PORT0		(0x0300)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_MASK		(0x00F0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT1		(0x00C0)
+#define U300_SYSCON_CICR_APP_SUBLVDS_RESCON_PORT0		(0x0030)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_MASK		(0x000F)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT1		(0x000C)
+#define U300_SYSCON_CICR_APP_SUBLVDS_PWR_DWN_N_PORT0		(0x0003)
 /* Clock activity observability register 0 */
 #define U300_SYSCON_C0OAR					(0x140)
 #define U300_SYSCON_C0OAR_MASK					(0xFFFF)
@@ -513,7 +608,7 @@
 /**
  * CPU medium frequency in MHz
  */
-#define SYSCON_CPU_CLOCK_MEDIUM  104
+#define SYSCON_CPU_CLOCK_MEDIUM   52
 /**
  * CPU low frequency in MHz
  */
@@ -527,7 +622,7 @@
 /**
  * EMIF medium frequency in MHz
  */
-#define SYSCON_EMIF_CLOCK_MEDIUM 104
+#define SYSCON_EMIF_CLOCK_MEDIUM  52
 /**
  * EMIF low frequency in MHz
  */
@@ -541,7 +636,7 @@
 /**
  * AHB medium frequency in MHz
  */
-#define SYSCON_AHB_CLOCK_MEDIUM   52
+#define SYSCON_AHB_CLOCK_MEDIUM   26
 /**
  * AHB low frequency in MHz
  */
@@ -553,6 +648,15 @@
   SYSCON_BM_VIDEO_ENC
 };
 
+/* Selectr a resistor or a set of resistors */
+enum syscon_pull_up_down {
+  SYSCON_PU_KEY_IN_EN,
+  SYSCON_PU_EMIF_1_8_BIT_EN,
+  SYSCON_PU_EMIF_1_16_BIT_EN,
+  SYSCON_PU_EMIF_1_NFIF_READY_EN,
+  SYSCON_PU_EMIF_1_NFIF_WAIT_N_EN,
+};
+
 /*
  * Note that this array must match the order of the array "clk_reg"
  * in syscon.c
@@ -575,6 +679,7 @@
   SYSCON_CLKCONTROL_SPI,
   SYSCON_CLKCONTROL_I2S0_CORE,
   SYSCON_CLKCONTROL_I2S1_CORE,
+  SYSCON_CLKCONTROL_UART1,
   SYSCON_CLKCONTROL_AAIF,
   SYSCON_CLKCONTROL_AHB,
   SYSCON_CLKCONTROL_APEX,
@@ -604,7 +709,8 @@
 
 enum syscon_sysclk_req {
   SYSCON_SYSCLKREQ_DISABLED,
-  SYSCON_SYSCLKREQ_ACTIVE_LOW
+  SYSCON_SYSCLKREQ_ACTIVE_LOW,
+  SYSCON_SYSCLKREQ_MONITOR
 };
 
 enum syscon_clk_mode {
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 585cc01..7b6b016 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -19,15 +19,16 @@
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
 
-#include <asm/mach/mmc.h>
 #include "mmc.h"
+#include "padmux.h"
 
 struct mmci_card_event {
 	struct input_dev *mmc_input;
 	int mmc_inserted;
 	struct work_struct workq;
-	struct mmc_platform_data mmc0_plat_data;
+	struct mmci_platform_data mmc0_plat_data;
 };
 
 static unsigned int mmc_status(struct device *dev)
@@ -146,6 +147,7 @@
 {
 	struct mmci_card_event *mmci_card;
 	struct device *mmcsd_device = &adev->dev;
+	struct pmx *pmx;
 	int ret = 0;
 
 	mmci_card = kzalloc(sizeof(struct mmci_card_event), GFP_KERNEL);
@@ -158,6 +160,8 @@
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
+	mmci_card->mmc0_plat_data.capabilities = MMC_CAP_MMC_HIGHSPEED |
+		MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA;
 
 	mmcsd_device->platform_data = (void *) &mmci_card->mmc0_plat_data;
 
@@ -207,6 +211,20 @@
 
 	input_set_drvdata(mmci_card->mmc_input, mmci_card);
 
+	/*
+	 * Setup padmuxing for MMC. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(mmcsd_device, U300_APP_PMX_MMC_SETTING);
+
+	if (IS_ERR(pmx))
+		pr_warning("Could not get padmux handle\n");
+	else {
+		ret = pmx_activate(mmcsd_device, pmx);
+		if (IS_ERR_VALUE(ret))
+			pr_warning("Could not activate padmuxing\n");
+	}
+
 	ret = gpio_register_callback(U300_GPIO_PIN_MMC_CD, mmci_callback,
 				     mmci_card);
 
diff --git a/arch/arm/mach-u300/padmux.c b/arch/arm/mach-u300/padmux.c
index f366456..4c93c6c 100644
--- a/arch/arm/mach-u300/padmux.c
+++ b/arch/arm/mach-u300/padmux.c
@@ -6,53 +6,362 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX functions
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
-#include <linux/io.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/bug.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <mach/u300-regs.h>
 #include <mach/syscon.h>
-
 #include "padmux.h"
 
-/* Set the PAD MUX to route the MMC reader correctly to GPIO0. */
-void pmx_set_mission_mode_mmc(void)
-{
-	u16 val;
+static DEFINE_MUTEX(pmx_mutex);
 
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val &= ~U300_SYSCON_PMC1LR_MMCSD_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1LR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	val &= ~U300_SYSCON_PMC1HR_APP_GPIO_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_GPIO_1_MMC;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+const u32 pmx_registers[] = {
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1LR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC2R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC3R),
+	(U300_SYSCON_VBASE + U300_SYSCON_PMC4R)
+};
+
+/* High level functionality */
+
+/* Lazy dog:
+ * onmask = {
+ *   {"PMC1LR" mask, "PMC1LR" value},
+ *   {"PMC1HR" mask, "PMC1HR" value},
+ *   {"PMC2R"  mask, "PMC2R"  value},
+ *   {"PMC3R"  mask, "PMC3R"  value},
+ *   {"PMC4R"  mask, "PMC4R"  value}
+ * }
+ */
+static struct pmx mmc_setting = {
+	.setting = U300_APP_PMX_MMC_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "MMC",
+	.onmask = {
+		   {U300_SYSCON_PMC1LR_MMCSD_MASK,
+		    U300_SYSCON_PMC1LR_MMCSD_MMCSD},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0},
+		   {U300_SYSCON_PMC4R_APP_MISC_12_MASK,
+		    U300_SYSCON_PMC4R_APP_MISC_12_APP_GPIO}
+		   },
+};
+
+static struct pmx spi_setting = {
+	.setting = U300_APP_PMX_SPI_SETTING,
+	.default_on = false,
+	.activated = false,
+	.name = "SPI",
+	.onmask = {{0, 0},
+		   {U300_SYSCON_PMC1HR_APP_SPI_2_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK,
+		    U300_SYSCON_PMC1HR_APP_SPI_2_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI |
+		    U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI},
+		   {0, 0},
+		   {0, 0},
+		   {0, 0}
+		   },
+};
+
+/* Available padmux settings */
+static struct pmx *pmx_settings[] = {
+	&mmc_setting,
+	&spi_setting,
+};
+
+static void update_registers(struct pmx *pmx, bool activate)
+{
+	u16 regval, val, mask;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(pmx_registers); i++) {
+		if (activate)
+			val = pmx->onmask[i].val;
+		else
+			val = 0;
+
+		mask = pmx->onmask[i].mask;
+		if (mask != 0) {
+			regval = readw(pmx_registers[i]);
+			regval &= ~mask;
+			regval |= val;
+			writew(regval, pmx_registers[i]);
+		}
+	}
 }
 
-void pmx_set_mission_mode_spi(void)
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting)
 {
-	u16 val;
+	int i;
+	struct pmx *pmx = ERR_PTR(-ENOENT);
 
-	/* Set up padmuxing so the SPI port and its chipselects are active */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
-	/*
-	 * Activate the SPI port (disable the use of these pins for generic
-	 * GPIO, DSP, AAIF
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_2_SPI;
-	/*
-	 * Use GPIO pin SPI CS1 for CS1 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_1_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_1_SPI;
-	/*
-	 * Use GPIO pin SPI CS2 for CS2 actually (it can be used for other
-	 * things also)
-	 */
-	val &= ~U300_SYSCON_PMC1HR_APP_SPI_CS_2_MASK;
-	val |= U300_SYSCON_PMC1HR_APP_SPI_CS_2_SPI;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMC1HR);
+	if (dev == NULL)
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (setting == pmx_settings[i]->setting) {
+
+			if (pmx_settings[i]->dev != NULL) {
+				WARN(1, "padmux: required setting "
+				     "in use by another consumer\n");
+			} else {
+				pmx = pmx_settings[i];
+				pmx->dev = dev;
+				dev_dbg(dev, "padmux: setting nr %d is now "
+					"bound to %s and ready to use\n",
+					setting, dev_name(dev));
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return pmx;
 }
+EXPORT_SYMBOL(pmx_get);
+
+int pmx_put(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot release handle as "
+					"it is bound to another consumer\n");
+				ret = -EINVAL;
+				break;
+			} else {
+				pmx_settings[i]->dev = NULL;
+				ret = 0;
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_put);
+
+int pmx_activate(struct device *dev, struct pmx *pmx)
+{
+	int i, j, ret;
+	ret = 0;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+
+	/* Make sure the required bits are not used */
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL || pmx_settings[i] == pmx)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			if (pmx_settings[i]->onmask[j].mask & pmx->
+				onmask[j].mask) {
+				/* More than one entry on the same bits */
+				WARN(1, "padmux: cannot activate "
+					"setting. Bit conflict with "
+					"an active setting\n");
+
+				ret = -EUSERS;
+				goto exit;
+			}
+		}
+	}
+	update_registers(pmx, true);
+	pmx->activated = true;
+	dev_dbg(dev, "padmux: setting nr %d is activated\n",
+		pmx->setting);
+
+exit:
+	mutex_unlock(&pmx_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(pmx_activate);
+
+int pmx_deactivate(struct device *dev, struct pmx *pmx)
+{
+	int i;
+	int ret = -ENOENT;
+
+	if (pmx == NULL || dev == NULL)
+		return -EINVAL;
+
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (pmx_settings[i]->dev == NULL)
+			continue;
+
+		if (pmx->setting == pmx_settings[i]->setting) {
+
+			if (dev != pmx->dev) {
+				WARN(1, "padmux: cannot deactivate "
+				     "pmx setting as it was activated "
+				     "by another consumer\n");
+
+				ret = -EBUSY;
+				continue;
+			} else {
+				update_registers(pmx, false);
+				pmx_settings[i]->dev = NULL;
+				pmx->activated = false;
+				ret = 0;
+				dev_dbg(dev, "padmux: setting nr %d is deactivated",
+					pmx->setting);
+				break;
+			}
+		}
+	}
+	mutex_unlock(&pmx_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL(pmx_deactivate);
+
+/*
+ * For internal use only. If it is to be exported,
+ * it should be reentrant. Notice that pmx_activate
+ * (i.e. runtime settings) always override default settings.
+ */
+static int pmx_set_default(void)
+{
+	/* Used to identify several entries on the same bits */
+	u16 modbits[ARRAY_SIZE(pmx_registers)];
+
+	int i, j;
+
+	memset(modbits, 0, ARRAY_SIZE(pmx_registers) * sizeof(u16));
+
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+
+		if (!pmx_settings[i]->default_on)
+			continue;
+
+		for (j = 0; j < ARRAY_SIZE(pmx_registers); j++) {
+
+			/* Make sure there is only one entry on the same bits */
+			if (modbits[j] & pmx_settings[i]->onmask[j].mask) {
+				BUG();
+				return -EUSERS;
+			}
+			modbits[j] |= pmx_settings[i]->onmask[j].mask;
+		}
+		update_registers(pmx_settings[i], true);
+	}
+	return 0;
+}
+
+#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
+static int pmx_show(struct seq_file *s, void *data)
+{
+	int i;
+	seq_printf(s, "-------------------------------------------------\n");
+	seq_printf(s, "SETTING     BOUND TO DEVICE               STATE\n");
+	seq_printf(s, "-------------------------------------------------\n");
+	mutex_lock(&pmx_mutex);
+	for (i = 0; i < ARRAY_SIZE(pmx_settings); i++) {
+		/* Format pmx and device name nicely */
+		char cdp[33];
+		int chars;
+
+		chars = snprintf(&cdp[0], 17, "%s", pmx_settings[i]->name);
+		while (chars < 16) {
+			cdp[chars] = ' ';
+			chars++;
+		}
+		chars = snprintf(&cdp[16], 17, "%s", pmx_settings[i]->dev ?
+				dev_name(pmx_settings[i]->dev) : "N/A");
+		while (chars < 16) {
+			cdp[chars+16] = ' ';
+			chars++;
+		}
+		cdp[32] = '\0';
+
+		seq_printf(s,
+			"%s\t%s\n",
+			&cdp[0],
+			pmx_settings[i]->activated ?
+			"ACTIVATED" : "DEACTIVATED"
+			);
+
+	}
+	mutex_unlock(&pmx_mutex);
+	return 0;
+}
+
+static int pmx_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, pmx_show, NULL);
+}
+
+static const struct file_operations pmx_operations = {
+	.owner		= THIS_MODULE,
+	.open		= pmx_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int __init init_pmx_read_debugfs(void)
+{
+	/* Expose a simple debugfs interface to view pmx settings */
+	(void) debugfs_create_file("padmux", S_IFREG | S_IRUGO,
+				   NULL, NULL,
+				   &pmx_operations);
+	return 0;
+}
+
+/*
+ * This needs to come in after the core_initcall(),
+ * because debugfs is not available until
+ * the subsystems come up.
+ */
+module_init(init_pmx_read_debugfs);
+#endif
+
+static int __init pmx_init(void)
+{
+	int ret;
+
+	ret = pmx_set_default();
+
+	if (IS_ERR_VALUE(ret))
+		pr_crit("padmux: default settings could not be set\n");
+
+	return 0;
+}
+
+/* Should be initialized before consumers */
+core_initcall(pmx_init);
diff --git a/arch/arm/mach-u300/padmux.h b/arch/arm/mach-u300/padmux.h
index 8c2099a..6e8b860 100644
--- a/arch/arm/mach-u300/padmux.h
+++ b/arch/arm/mach-u300/padmux.h
@@ -6,14 +6,34 @@
  * Copyright (C) 2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * U300 PADMUX API
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- *
+ * Author: Martin Persson <martin.persson@stericsson.com>
  */
 
 #ifndef __MACH_U300_PADMUX_H
 #define __MACH_U300_PADMUX_H
 
-void pmx_set_mission_mode_mmc(void);
-void pmx_set_mission_mode_spi(void);
+enum pmx_settings {
+	U300_APP_PMX_MMC_SETTING,
+	U300_APP_PMX_SPI_SETTING
+};
+
+struct pmx_onmask {
+	u16 mask;		/* Mask bits */
+	u16 val;		/* Value when active */
+};
+
+struct pmx {
+	struct device *dev;
+	enum pmx_settings setting;
+	char *name;
+	bool activated;
+	bool default_on;
+	struct pmx_onmask onmask[];
+};
+
+struct pmx *pmx_get(struct device *dev, enum pmx_settings setting);
+int pmx_put(struct device *dev, struct pmx *pmx);
+int pmx_activate(struct device *dev, struct pmx *pmx);
+int pmx_deactivate(struct device *dev, struct pmx *pmx);
 
 #endif
diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c
new file mode 100644
index 0000000..f0e887b
--- /dev/null
+++ b/arch/arm/mach-u300/spi.c
@@ -0,0 +1,124 @@
+/*
+ * arch/arm/mach-u300/spi.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/spi/spi.h>
+#include <linux/amba/pl022.h>
+#include <linux/err.h>
+#include "padmux.h"
+
+/*
+ * The following is for the actual devices on the SSP/SPI bus
+ */
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+static void select_dummy_chip(u32 chipselect)
+{
+	pr_debug("CORE: %s called with CS=0x%x (%s)\n",
+		 __func__,
+		 chipselect,
+		 chipselect ? "unselect chip" : "select chip");
+	/*
+	 * Here you would write the chip select value to the GPIO pins if
+	 * this was a real chip (but this is a loopback dummy).
+	 */
+}
+
+struct pl022_config_chip dummy_chip_info = {
+	/* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */
+	.lbm = LOOPBACK_ENABLED,
+	/*
+	 * available POLLING_TRANSFER and INTERRUPT_TRANSFER,
+	 * DMA_TRANSFER does not work
+	 */
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* We can only act as master but SSP_SLAVE is possible in theory */
+	.hierarchy = SSP_MASTER,
+	/* 0 = drive TX even as slave, 1 = do not drive TX as slave */
+	.slave_tx_disable = 0,
+	/* LSB first */
+	.endian_tx = SSP_TX_LSB,
+	.endian_rx = SSP_RX_LSB,
+	.data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_LOW,
+	.ctrl_len = SSP_BITS_12,
+	.wait_state = SSP_MWIRE_WAIT_ZERO,
+	.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+	/*
+	 * This is where you insert a call to a function to enable CS
+	 * (usually GPIO) for a certain chip.
+	 */
+	.cs_control = select_dummy_chip,
+};
+#endif
+
+static struct spi_board_info u300_spi_devices[] = {
+#ifdef CONFIG_MACH_U300_SPIDUMMY
+	{
+		/* A dummy chip used for loopback tests */
+		.modalias       = "spi-dummy",
+		/* Really dummy, pass in additional chip config here */
+		.platform_data  = NULL,
+		/* This defines how the controller shall handle the device */
+		.controller_data = &dummy_chip_info,
+		/* .irq - no external IRQ routed from this device */
+		.max_speed_hz   = 1000000,
+		.bus_num        = 0, /* Only one bus on this chip */
+		.chip_select    = 0,
+		/* Means SPI_CS_HIGH, change if e.g low CS */
+		.mode           = 0,
+	},
+#endif
+};
+
+static struct pl022_ssp_controller ssp_platform_data = {
+	/* If you have several SPI buses this varies, we have only bus 0 */
+	.bus_id = 0,
+	/* Set this to 1 when we think we got DMA working */
+	.enable_dma = 0,
+	/*
+	 * On the APP CPU GPIO 4, 5 and 6 are connected as generic
+	 * chip selects for SPI. (Same on U330, U335 and U365.)
+	 * TODO: make sure the GPIO driver can select these properly
+	 * and do padmuxing accordingly too.
+	 */
+	.num_chipselect = 3,
+};
+
+
+void __init u300_spi_init(struct amba_device *adev)
+{
+	struct pmx *pmx;
+
+	adev->dev.platform_data = &ssp_platform_data;
+	/*
+	 * Setup padmuxing for SPI. Since this must always be
+	 * compiled into the kernel, pmx is never released.
+	 */
+	pmx = pmx_get(&adev->dev, U300_APP_PMX_SPI_SETTING);
+
+	if (IS_ERR(pmx))
+		dev_warn(&adev->dev, "Could not get padmux handle\n");
+	else {
+		int ret;
+
+		ret = pmx_activate(&adev->dev, pmx);
+		if (IS_ERR_VALUE(ret))
+			dev_warn(&adev->dev, "Could not activate padmuxing\n");
+	}
+
+}
+void __init u300_spi_register_board_devices(void)
+{
+	/* Register any SPI devices */
+	spi_register_board_info(u300_spi_devices, ARRAY_SIZE(u300_spi_devices));
+}
diff --git a/arch/arm/mach-u300/spi.h b/arch/arm/mach-u300/spi.h
new file mode 100644
index 0000000..bd3d867
--- /dev/null
+++ b/arch/arm/mach-u300/spi.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-u300/spi.h
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#ifndef SPI_H
+#define SPI_H
+#include <linux/amba/bus.h>
+
+#ifdef CONFIG_SPI_PL022
+void __init u300_spi_init(struct amba_device *adev);
+void __init u300_spi_register_board_devices(void);
+#else
+/* Compile out SPI support if PL022 is not selected */
+static inline void __init u300_spi_init(struct amba_device *adev)
+{
+}
+static inline void __init u300_spi_register_board_devices(void)
+{
+}
+#endif
+
+#endif
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
index cce5320..26d26f5 100644
--- a/arch/arm/mach-u300/timer.c
+++ b/arch/arm/mach-u300/timer.c
@@ -346,6 +346,21 @@
 	.flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
+/*
+ * Override the global weak sched_clock symbol with this
+ * local implementation which uses the clocksource to get some
+ * better resolution when scheduling the kernel. We accept that
+ * this wraps around for now, since it is just a relative time
+ * stamp. (Inspired by OMAP implementation.)
+ */
+unsigned long long notrace sched_clock(void)
+{
+	return clocksource_cyc2ns(clocksource_u300_1mhz.read(
+				  &clocksource_u300_1mhz),
+				  clocksource_u300_1mhz.mult,
+				  clocksource_u300_1mhz.shift);
+}
+
 
 /*
  * This sets up the system timers, clock source and clock event.
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 975eae4..e13be7c 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -27,6 +27,7 @@
 #include <linux/amba/bus.h>
 #include <linux/amba/clcd.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 #include <linux/cnt32_to_63.h>
@@ -47,7 +48,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 #include "clock.h"
@@ -369,7 +369,7 @@
 	return readl(VERSATILE_SYSMCI) & mask;
 }
 
-static struct mmc_platform_data mmc0_plat_data = {
+static struct mmci_platform_data mmc0_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 9af8d81..239cd30 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -24,6 +24,7 @@
 #include <linux/sysdev.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl061.h>
+#include <linux/amba/mmci.h>
 #include <linux/io.h>
 
 #include <mach/hardware.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/mmc.h>
 
 #include "core.h"
 
@@ -41,7 +41,7 @@
 #define IRQ_MMCI1A	IRQ_SIC_MMCI1A
 #endif
 
-static struct mmc_platform_data mmc1_plat_data = {
+static struct mmci_platform_data mmc1_plat_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
 	.status		= mmc_status,
 	.gpio_wp	= -1,
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5fe595a..e993140 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -17,7 +17,7 @@
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  The ARM610 is the successor to the ARM3 processor
 	  and was produced by VLSI Technology Inc.
@@ -31,7 +31,7 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
@@ -49,7 +49,7 @@
 	select CPU_CP15_MMU
 	select CPU_COPY_V3 if MMU
 	select CPU_TLB_V3 if MMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	help
 	  A 32-bit RISC microprocessor based on the ARM7 processor core
 	  designed by Advanced RISC Machines Ltd. The ARM710 is the
@@ -64,7 +64,7 @@
 	bool "Support ARM720T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -83,7 +83,7 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_LV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V3	# although the core is v4t
 	select CPU_CP15_MPU
 	help
@@ -100,7 +100,7 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4
 	help
 	  A 32-bit RISC microprocessor based on the ARM9 processor core
@@ -114,7 +114,7 @@
 	bool "Support ARM920T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -135,7 +135,7 @@
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -154,7 +154,7 @@
  	bool "Support ARM925T processor" if ARCH_OMAP1
 	select CPU_32v4T
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -173,7 +173,7 @@
 	bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
 	select CPU_32v5
 	select CPU_ABRT_EV5TJ
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU
@@ -191,7 +191,7 @@
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_CACHE_FA
@@ -210,7 +210,7 @@
 	depends on !MMU
 	select CPU_32v4T
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -228,7 +228,7 @@
 	depends on !MMU
 	select CPU_32v5
 	select CPU_ABRT_NOMMU
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MPU
 	help
@@ -244,7 +244,7 @@
 	bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -262,7 +262,7 @@
 	bool "Support ARM1020E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -275,7 +275,7 @@
 	bool "Support ARM1022E processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV4T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -293,7 +293,7 @@
 	bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
 	select CPU_32v5
 	select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_V4WB if MMU # can probably do better
@@ -311,7 +311,7 @@
 	select CPU_32v3 if ARCH_RPC
 	select CPU_32v4 if !ARCH_RPC
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -331,7 +331,7 @@
 	bool
 	select CPU_32v4
 	select CPU_ABRT_EV4
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_V4WB
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
@@ -342,7 +342,7 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -352,7 +352,7 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -363,7 +363,7 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_TLB_V4WBI if MMU
@@ -374,7 +374,7 @@
 	bool
 	select CPU_32v5
 	select CPU_ABRT_EV5T
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_LEGACY
 	select CPU_CACHE_VIVT
 	select CPU_CP15_MMU
 	select CPU_COPY_FEROCEON if MMU
@@ -394,7 +394,7 @@
 	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
 	select CPU_32v6
 	select CPU_ABRT_EV6
-	select CPU_PABRT_NOIFAR
+	select CPU_PABRT_V6
 	select CPU_CACHE_V6
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -420,7 +420,7 @@
 	select CPU_32v6K
 	select CPU_32v7
 	select CPU_ABRT_EV7
-	select CPU_PABRT_IFAR
+	select CPU_PABRT_V7
 	select CPU_CACHE_V7
 	select CPU_CACHE_VIPT
 	select CPU_CP15_MMU
@@ -482,10 +482,13 @@
 config CPU_ABRT_EV7
 	bool
 
-config CPU_PABRT_IFAR
+config CPU_PABRT_LEGACY
 	bool
 
-config CPU_PABRT_NOIFAR
+config CPU_PABRT_V6
+	bool
+
+config CPU_PABRT_V7
 	bool
 
 # The cache model
@@ -771,3 +774,8 @@
 	select OUTER_CACHE
 	help
 	  This option enables the L2 cache on XScale3.
+
+config ARM_L1_CACHE_SHIFT
+	int
+	default 6 if ARCH_OMAP3
+	default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 63e3f6d..055cb2aa 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -27,6 +27,10 @@
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
+obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
+obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
+
 obj-$(CONFIG_CPU_CACHE_V3)	+= cache-v3.o
 obj-$(CONFIG_CPU_CACHE_V4)	+= cache-v4.o
 obj-$(CONFIG_CPU_CACHE_V4WT)	+= cache-v4wt.o
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index cc8829d..ae0e25f 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -25,6 +25,19 @@
 
 #include "fault.h"
 
+/*
+ * Fault status register encodings.  We steal bit 31 for our own purposes.
+ */
+#define FSR_LNX_PF		(1 << 31)
+#define FSR_WRITE		(1 << 11)
+#define FSR_FS4			(1 << 10)
+#define FSR_FS3_0		(15)
+
+static inline int fsr_fs(unsigned int fsr)
+{
+	return (fsr & FSR_FS3_0) | (fsr & FSR_FS4) >> 6;
+}
+
 #ifdef CONFIG_MMU
 
 #ifdef CONFIG_KPROBES
@@ -182,18 +195,35 @@
 #define VM_FAULT_BADMAP		0x010000
 #define VM_FAULT_BADACCESS	0x020000
 
-static int
+/*
+ * Check that the permissions on the VMA allow for the fault which occurred.
+ * If we encountered a write fault, we must have write permission, otherwise
+ * we allow any permission.
+ */
+static inline bool access_error(unsigned int fsr, struct vm_area_struct *vma)
+{
+	unsigned int mask = VM_READ | VM_WRITE | VM_EXEC;
+
+	if (fsr & FSR_WRITE)
+		mask = VM_WRITE;
+	if (fsr & FSR_LNX_PF)
+		mask = VM_EXEC;
+
+	return vma->vm_flags & mask ? false : true;
+}
+
+static int __kprobes
 __do_page_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr,
 		struct task_struct *tsk)
 {
 	struct vm_area_struct *vma;
-	int fault, mask;
+	int fault;
 
 	vma = find_vma(mm, addr);
 	fault = VM_FAULT_BADMAP;
-	if (!vma)
+	if (unlikely(!vma))
 		goto out;
-	if (vma->vm_start > addr)
+	if (unlikely(vma->vm_start > addr))
 		goto check_stack;
 
 	/*
@@ -201,47 +231,24 @@
 	 * memory access, so we can handle it.
 	 */
 good_area:
-	if (fsr & (1 << 11)) /* write? */
-		mask = VM_WRITE;
-	else
-		mask = VM_READ|VM_EXEC|VM_WRITE;
-
-	fault = VM_FAULT_BADACCESS;
-	if (!(vma->vm_flags & mask))
+	if (access_error(fsr, vma)) {
+		fault = VM_FAULT_BADACCESS;
 		goto out;
+	}
 
 	/*
-	 * If for any reason at all we couldn't handle
-	 * the fault, make sure we exit gracefully rather
-	 * than endlessly redo the fault.
+	 * If for any reason at all we couldn't handle the fault, make
+	 * sure we exit gracefully rather than endlessly redo the fault.
 	 */
-survive:
-	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & (1 << 11)) ? FAULT_FLAG_WRITE : 0);
-	if (unlikely(fault & VM_FAULT_ERROR)) {
-		if (fault & VM_FAULT_OOM)
-			goto out_of_memory;
-		else if (fault & VM_FAULT_SIGBUS)
-			return fault;
-		BUG();
-	}
+	fault = handle_mm_fault(mm, vma, addr & PAGE_MASK, (fsr & FSR_WRITE) ? FAULT_FLAG_WRITE : 0);
+	if (unlikely(fault & VM_FAULT_ERROR))
+		return fault;
 	if (fault & VM_FAULT_MAJOR)
 		tsk->maj_flt++;
 	else
 		tsk->min_flt++;
 	return fault;
 
-out_of_memory:
-	if (!is_global_init(tsk))
-		goto out;
-
-	/*
-	 * If we are out of memory for pid1, sleep for a while and retry
-	 */
-	up_read(&mm->mmap_sem);
-	yield();
-	down_read(&mm->mmap_sem);
-	goto survive;
-
 check_stack:
 	if (vma->vm_flags & VM_GROWSDOWN && !expand_stack(vma, addr))
 		goto good_area;
@@ -278,6 +285,13 @@
 		if (!user_mode(regs) && !search_exception_tables(regs->ARM_pc))
 			goto no_context;
 		down_read(&mm->mmap_sem);
+	} else {
+		/*
+		 * The above down_read_trylock() might have succeeded in
+		 * which case, we'll have missed the might_sleep() from
+		 * down_read()
+		 */
+		might_sleep();
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);
@@ -289,6 +303,16 @@
 	if (likely(!(fault & (VM_FAULT_ERROR | VM_FAULT_BADMAP | VM_FAULT_BADACCESS))))
 		return 0;
 
+	if (fault & VM_FAULT_OOM) {
+		/*
+		 * We ran out of memory, call the OOM killer, and return to
+		 * userspace (which will retry the fault, or kill us if we
+		 * got oom-killed)
+		 */
+		pagefault_out_of_memory();
+		return 0;
+	}
+
 	/*
 	 * If we are in kernel mode at this point, we
 	 * have no context to handle this fault with.
@@ -296,16 +320,6 @@
 	if (!user_mode(regs))
 		goto no_context;
 
-	if (fault & VM_FAULT_OOM) {
-		/*
-		 * We ran out of memory, or some other thing
-		 * happened to us that made us unable to handle
-		 * the page fault gracefully.
-		 */
-		printk("VM: killing process %s\n", tsk->comm);
-		do_group_exit(SIGKILL);
-		return 0;
-	}
 	if (fault & VM_FAULT_SIGBUS) {
 		/*
 		 * We had some memory, but were unable to
@@ -489,10 +503,10 @@
 asmlinkage void __exception
 do_DataAbort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 {
-	const struct fsr_info *inf = fsr_info + (fsr & 15) + ((fsr & (1 << 10)) >> 6);
+	const struct fsr_info *inf = fsr_info + fsr_fs(fsr);
 	struct siginfo info;
 
-	if (!inf->fn(addr, fsr, regs))
+	if (!inf->fn(addr, fsr & ~FSR_LNX_PF, regs))
 		return;
 
 	printk(KERN_ALERT "Unhandled fault: %s (0x%03x) at 0x%08lx\n",
@@ -505,9 +519,58 @@
 	arm_notify_die("", regs, &info, fsr, 0);
 }
 
+
+static struct fsr_info ifsr_info[] = {
+	{ do_bad,		SIGBUS,  0,		"unknown 0"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 1"			   },
+	{ do_bad,		SIGBUS,  0,		"debug event"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section access flag fault"	   },
+	{ do_bad,		SIGBUS,  0,		"unknown 4"			   },
+	{ do_translation_fault,	SIGSEGV, SEGV_MAPERR,	"section translation fault"	   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page access flag fault"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_MAPERR,	"page translation fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on non-linefetch"  },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"section domain fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 10"			   },
+	{ do_bad,		SIGSEGV, SEGV_ACCERR,	"page domain fault"		   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_sect_fault,	SIGSEGV, SEGV_ACCERR,	"section permission fault"	   },
+	{ do_bad,		SIGBUS,	 0,		"external abort on translation"	   },
+	{ do_page_fault,	SIGSEGV, SEGV_ACCERR,	"page permission fault"		   },
+	{ do_bad,		SIGBUS,  0,		"unknown 16"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 17"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 18"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 19"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 20"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 21"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 22"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 23"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 24"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 25"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 26"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 27"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 28"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 29"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 30"			   },
+	{ do_bad,		SIGBUS,  0,		"unknown 31"			   },
+};
+
 asmlinkage void __exception
-do_PrefetchAbort(unsigned long addr, struct pt_regs *regs)
+do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
 {
-	do_translation_fault(addr, 0, regs);
+	const struct fsr_info *inf = ifsr_info + fsr_fs(ifsr);
+	struct siginfo info;
+
+	if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
+		return;
+
+	printk(KERN_ALERT "Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
+		inf->name, ifsr, addr);
+
+	info.si_signo = inf->sig;
+	info.si_errno = 0;
+	info.si_code  = inf->code;
+	info.si_addr  = (void __user *)addr;
+	arm_notify_die("", regs, &info, ifsr, 0);
 }
 
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index f982606..877c492 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -613,6 +613,14 @@
 
 void free_initmem(void)
 {
+#ifdef CONFIG_HAVE_TCM
+	extern char *__tcm_start, *__tcm_end;
+
+	totalram_pages += free_area(__phys_to_pfn(__pa(__tcm_start)),
+				    __phys_to_pfn(__pa(__tcm_end)),
+				    "TCM link");
+#endif
+
 	if (!machine_is_integrator() && !machine_is_cintegrator())
 		totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)),
 					    __phys_to_pfn(__pa(__init_end)),
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index f7457fe..2b79964 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -124,7 +124,7 @@
 {
 	if (addr < PHYS_OFFSET)
 		return 0;
-	if (addr + size >= __pa(high_memory - 1))
+	if (addr + size > __pa(high_memory - 1) + 1)
 		return 0;
 
 	return 1;
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 4426ee6..02243ee 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -21,6 +21,7 @@
 #include <asm/cachetype.h>
 #include <asm/setup.h>
 #include <asm/sizes.h>
+#include <asm/smp_plat.h>
 #include <asm/tlb.h>
 #include <asm/highmem.h>
 
@@ -709,10 +710,6 @@
 			if (meminfo.nr_banks >= NR_BANKS) {
 				printk(KERN_CRIT "NR_BANKS too low, "
 						 "ignoring high memory\n");
-			} else if (cache_is_vipt_aliasing()) {
-				printk(KERN_CRIT "HIGHMEM is not yet supported "
-						 "with VIPT aliasing cache, "
-						 "ignoring high memory\n");
 			} else {
 				memmove(bank + 1, bank,
 					(meminfo.nr_banks - i) * sizeof(*bank));
@@ -726,6 +723,8 @@
 			bank->size = VMALLOC_MIN - __va(bank->start);
 		}
 #else
+		bank->highmem = highmem;
+
 		/*
 		 * Check whether this memory bank would entirely overlap
 		 * the vmalloc area.
@@ -754,6 +753,38 @@
 #endif
 		j++;
 	}
+#ifdef CONFIG_HIGHMEM
+	if (highmem) {
+		const char *reason = NULL;
+
+		if (cache_is_vipt_aliasing()) {
+			/*
+			 * Interactions between kmap and other mappings
+			 * make highmem support with aliasing VIPT caches
+			 * rather difficult.
+			 */
+			reason = "with VIPT aliasing cache";
+#ifdef CONFIG_SMP
+		} else if (tlb_ops_need_broadcast()) {
+			/*
+			 * kmap_high needs to occasionally flush TLB entries,
+			 * however, if the TLB entries need to be broadcast
+			 * we may deadlock:
+			 *  kmap_high(irqs off)->flush_all_zero_pkmaps->
+			 *  flush_tlb_kernel_range->smp_call_function_many
+			 *   (must not be called with irqs off)
+			 */
+			reason = "without hardware TLB ops broadcasting";
+#endif
+		}
+		if (reason) {
+			printk(KERN_CRIT "HIGHMEM is not supported %s, ignoring high memory\n",
+				reason);
+			while (j > 0 && meminfo.bank[j - 1].highmem)
+				j--;
+		}
+	}
+#endif
 	meminfo.nr_banks = j;
 }
 
diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S
new file mode 100644
index 0000000..87970eb
--- /dev/null
+++ b/arch/arm/mm/pabort-legacy.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: legacy_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = Simulated IFSR with section translation fault status
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(legacy_pabort)
+	mov	r1, #5
+	mov	pc, lr
+ENDPROC(legacy_pabort)
diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S
new file mode 100644
index 0000000..06e3d1e
--- /dev/null
+++ b/arch/arm/mm/pabort-v6.S
@@ -0,0 +1,19 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v6_pabort)
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v6_pabort)
diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S
new file mode 100644
index 0000000..a8b3b30
--- /dev/null
+++ b/arch/arm/mm/pabort-v7.S
@@ -0,0 +1,20 @@
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Function: v6_pabort
+ *
+ * Params  : r0 = address of aborted instruction
+ *
+ * Returns : r0 = address of abort
+ *	   : r1 = IFSR
+ *
+ * Purpose : obtain information about current prefetch abort.
+ */
+
+	.align	5
+ENTRY(v7_pabort)
+	mrc	p15, 0, r0, c6, c0, 2		@ get IFAR
+	mrc	p15, 0, r1, c5, c0, 1		@ get IFSR
+	mov	pc, lr
+ENDPROC(v7_pabort)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index b5551bf..d9fb4b9 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -449,7 +449,7 @@
 	.type	arm1020_processor_functions, #object
 arm1020_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020_proc_init
 	.word	cpu_arm1020_proc_fin
 	.word	cpu_arm1020_reset
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 8bc6740..7453b75 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -430,7 +430,7 @@
 	.type	arm1020e_processor_functions, #object
 arm1020e_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1020e_proc_init
 	.word	cpu_arm1020e_proc_fin
 	.word	cpu_arm1020e_reset
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 2cd03e6..8eb72d7 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -413,7 +413,7 @@
 	.type	arm1022_processor_functions, #object
 arm1022_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1022_proc_init
 	.word	cpu_arm1022_proc_fin
 	.word	cpu_arm1022_reset
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index ad961a8..3b59f0d 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -408,7 +408,7 @@
 	.type	arm1026_processor_functions, #object
 arm1026_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm1026_proc_init
 	.word	cpu_arm1026_proc_fin
 	.word	cpu_arm1026_reset
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 80d6e1d..3f9cd3d 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -278,7 +278,7 @@
 		.type	arm6_processor_functions, #object
 ENTRY(arm6_processor_functions)
 		.word	cpu_arm6_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm6_proc_init
 		.word	cpu_arm6_proc_fin
 		.word	cpu_arm6_reset
@@ -295,7 +295,7 @@
 		.type	arm7_processor_functions, #object
 ENTRY(arm7_processor_functions)
 		.word	cpu_arm7_data_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7_proc_init
 		.word	cpu_arm7_proc_fin
 		.word	cpu_arm7_reset
diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S
index 85ae186..0b62de2 100644
--- a/arch/arm/mm/proc-arm720.S
+++ b/arch/arm/mm/proc-arm720.S
@@ -181,7 +181,7 @@
 		.type	arm720_processor_functions, #object
 ENTRY(arm720_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm720_proc_init
 		.word	cpu_arm720_proc_fin
 		.word	cpu_arm720_reset
diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S
index 4f95bee..01860cd 100644
--- a/arch/arm/mm/proc-arm740.S
+++ b/arch/arm/mm/proc-arm740.S
@@ -126,7 +126,7 @@
 	.type	arm740_processor_functions, #object
 ENTRY(arm740_processor_functions)
 	.word	v4t_late_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm740_proc_init
 	.word	cpu_arm740_proc_fin
 	.word	cpu_arm740_reset
diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S
index 93e05fa..1201b98 100644
--- a/arch/arm/mm/proc-arm7tdmi.S
+++ b/arch/arm/mm/proc-arm7tdmi.S
@@ -64,7 +64,7 @@
 		.type	arm7tdmi_processor_functions, #object
 ENTRY(arm7tdmi_processor_functions)
 		.word	v4t_late_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm7tdmi_proc_init
 		.word	cpu_arm7tdmi_proc_fin
 		.word	cpu_arm7tdmi_reset
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 914d688..2b7c197 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -395,7 +395,7 @@
 	.type	arm920_processor_functions, #object
 arm920_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm920_proc_init
 	.word	cpu_arm920_proc_fin
 	.word	cpu_arm920_reset
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 51c9c98..06a1aa4 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -399,7 +399,7 @@
 	.type	arm922_processor_functions, #object
 arm922_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm922_proc_init
 	.word	cpu_arm922_proc_fin
 	.word	cpu_arm922_reset
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 2724526..cb53435 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -462,7 +462,7 @@
 	.type	arm925_processor_functions, #object
 arm925_processor_functions:
 	.word	v4t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm925_proc_init
 	.word	cpu_arm925_proc_fin
 	.word	cpu_arm925_reset
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 5446693..1c48487 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -415,7 +415,7 @@
 	.type	arm926_processor_functions, #object
 arm926_processor_functions:
 	.word	v5tj_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm926_proc_init
 	.word	cpu_arm926_proc_fin
 	.word	cpu_arm926_reset
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index f595117..5b0f846 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -322,7 +322,7 @@
 	.type	arm940_processor_functions, #object
 ENTRY(arm940_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm940_proc_init
 	.word	cpu_arm940_proc_fin
 	.word	cpu_arm940_reset
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index e03f6ff..40c0449 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -377,7 +377,7 @@
 	.type	arm946_processor_functions, #object
 ENTRY(arm946_processor_functions)
 	.word	nommu_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_arm946_proc_init
 	.word	cpu_arm946_proc_fin
 	.word	cpu_arm946_reset
diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S
index be6c11d..28545c2 100644
--- a/arch/arm/mm/proc-arm9tdmi.S
+++ b/arch/arm/mm/proc-arm9tdmi.S
@@ -64,7 +64,7 @@
 		.type	arm9tdmi_processor_functions, #object
 ENTRY(arm9tdmi_processor_functions)
 		.word	nommu_early_abort
-		.word	pabort_noifar
+		.word	legacy_pabort
 		.word	cpu_arm9tdmi_proc_init
 		.word	cpu_arm9tdmi_proc_fin
 		.word	cpu_arm9tdmi_reset
diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S
index 08b8a95..08f5ac2 100644
--- a/arch/arm/mm/proc-fa526.S
+++ b/arch/arm/mm/proc-fa526.S
@@ -191,7 +191,7 @@
 	.type	fa526_processor_functions, #object
 fa526_processor_functions:
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_fa526_proc_init
 	.word	cpu_fa526_proc_fin
 	.word	cpu_fa526_reset
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index 0fe1f8f..d0d7795 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -499,7 +499,7 @@
 	.type	feroceon_processor_functions, #object
 feroceon_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_feroceon_proc_init
 	.word	cpu_feroceon_proc_fin
 	.word	cpu_feroceon_reset
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 540f507..52b5fd7 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -359,7 +359,7 @@
 	.type	mohawk_processor_functions, #object
 mohawk_processor_functions:
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_mohawk_proc_init
 	.word	cpu_mohawk_proc_fin
 	.word	cpu_mohawk_reset
diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S
index 90a7e52..7b706b3 100644
--- a/arch/arm/mm/proc-sa110.S
+++ b/arch/arm/mm/proc-sa110.S
@@ -199,7 +199,7 @@
 	.type	sa110_processor_functions, #object
 ENTRY(sa110_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa110_proc_init
 	.word	cpu_sa110_proc_fin
 	.word	cpu_sa110_reset
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 451e2d9..ee77002 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -214,7 +214,7 @@
 	.type	sa1100_processor_functions, #object
 ENTRY(sa1100_processor_functions)
 	.word	v4_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_sa1100_proc_init
 	.word	cpu_sa1100_proc_fin
 	.word	cpu_sa1100_reset
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 524ddae..194737d 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -191,7 +191,7 @@
 	.type	v6_processor_functions, #object
 ENTRY(v6_processor_functions)
 	.word	v6_early_abort
-	.word	pabort_noifar
+	.word	v6_pabort
 	.word	cpu_v6_proc_init
 	.word	cpu_v6_proc_fin
 	.word	cpu_v6_reset
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index f3fa1c3..23ebcf6 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -295,7 +295,7 @@
 	.type	v7_processor_functions, #object
 ENTRY(v7_processor_functions)
 	.word	v7_early_abort
-	.word	pabort_ifar
+	.word	v7_pabort
 	.word	cpu_v7_proc_init
 	.word	cpu_v7_proc_fin
 	.word	cpu_v7_reset
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 33515c2..2028f37 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -428,7 +428,7 @@
 	.type	xsc3_processor_functions, #object
 ENTRY(xsc3_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xsc3_proc_init
 	.word	cpu_xsc3_proc_fin
 	.word	cpu_xsc3_reset
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 4233942..f056c28 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -511,7 +511,7 @@
 	.type	xscale_processor_functions, #object
 ENTRY(xscale_processor_functions)
 	.word	v5t_early_abort
-	.word	pabort_noifar
+	.word	legacy_pabort
 	.word	cpu_xscale_proc_init
 	.word	cpu_xscale_proc_fin
 	.word	cpu_xscale_reset
diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c
index 77fa7cc..ce31f31 100644
--- a/arch/arm/plat-iop/pci.c
+++ b/arch/arm/plat-iop/pci.c
@@ -257,7 +257,8 @@
 	*IOP3XX_OUMWTVR0 = 0;
 
 	/* Outbound window 1 */
-	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA + IOP3XX_PCI_MEM_WINDOW_SIZE;
+	*IOP3XX_OMWTVR1 = IOP3XX_PCI_LOWER_MEM_BA +
+			  IOP3XX_PCI_MEM_WINDOW_SIZE / 2;
 	*IOP3XX_OUMWTVR1 = 0;
 
 	/* BAR 3 ( Disabled ) */
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 3695bbe..8da95d5 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -85,7 +85,7 @@
 {
 	u32 timer_ctl;
 
-	ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
+	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
 	ticks_per_usec = tick_rate / 1000000;
 	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 693839c..71ebd7f 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -250,7 +250,7 @@
 
 #ifdef CONFIG_ARCH_OMAP850
 static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_BASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
+	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
 	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
 	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/mach/keypad.h
index 45ea3ae..d91b9be 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/mach/keypad.h
@@ -10,6 +10,8 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
+#include <linux/input/matrix_keypad.h>
+
 struct omap_kp_platform_data {
 	int rows;
 	int cols;
@@ -35,9 +37,6 @@
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
-#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
-#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
-						KEY_PERSISTENT)
 
 #endif
 
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h
index 98dfab6..0f49d2d 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/mach/mux.h
@@ -840,12 +840,14 @@
 	 */
 	AF26_34XX_GPIO0,
 	AF22_34XX_GPIO9,
+	AG9_34XX_GPIO23,
 	AH8_34XX_GPIO29,
 	U8_34XX_GPIO54_OUT,
 	U8_34XX_GPIO54_DOWN,
 	L8_34XX_GPIO63,
 	G25_34XX_GPIO86_OUT,
 	AG4_34XX_GPIO134_OUT,
+	AF4_34XX_GPIO135_OUT,
 	AE4_34XX_GPIO136_OUT,
 	AF6_34XX_GPIO140_UP,
 	AE6_34XX_GPIO141,
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index 6fc52fc..57f7122 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -199,7 +199,8 @@
 		va += bytes;
 	}
 
-	flush_cache_vmap(new->addr, new->addr + total);
+	flush_cache_vmap((unsigned long)new->addr,
+				(unsigned long)(new->addr + total));
 	return new->addr;
 
 err_out:
@@ -390,7 +391,7 @@
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap(_va, va_end);
+	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c
index 70aeee4..2975798 100644
--- a/arch/arm/plat-pxa/dma.c
+++ b/arch/arm/plat-pxa/dma.c
@@ -17,22 +17,266 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/errno.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/system.h>
 #include <asm/irq.h>
+#include <asm/memory.h>
 #include <mach/hardware.h>
 #include <mach/dma.h>
 
+#define DMA_DEBUG_NAME		"pxa_dma"
+#define DMA_MAX_REQUESTERS	64
+
 struct dma_channel {
 	char *name;
 	pxa_dma_prio prio;
 	void (*irq_handler)(int, void *);
 	void *data;
+	spinlock_t lock;
 };
 
 static struct dma_channel *dma_channels;
 static int num_dma_channels;
 
+/*
+ * Debug fs
+ */
+#ifdef CONFIG_DEBUG_FS
+#include <linux/debugfs.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+static struct dentry *dbgfs_root, *dbgfs_state, **dbgfs_chan;
+
+static int dbg_show_requester_chan(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i;
+	u32 drcmr;
+
+	pos += seq_printf(s, "DMA channel %d requesters list :\n", chan);
+	for (i = 0; i < DMA_MAX_REQUESTERS; i++) {
+		drcmr = DRCMR(i);
+		if ((drcmr & DRCMR_CHLNUM) == chan)
+			pos += seq_printf(s, "\tRequester %d (MAPVLD=%d)\n", i,
+					  !!(drcmr & DRCMR_MAPVLD));
+	}
+	return pos;
+}
+
+static inline int dbg_burst_from_dcmd(u32 dcmd)
+{
+	int burst = (dcmd >> 16) & 0x3;
+
+	return burst ? 4 << burst : 0;
+}
+
+static int is_phys_valid(unsigned long addr)
+{
+	return pfn_valid(__phys_to_pfn(addr));
+}
+
+#define DCSR_STR(flag) (dcsr & DCSR_##flag ? #flag" " : "")
+#define DCMD_STR(flag) (dcmd & DCMD_##flag ? #flag" " : "")
+
+static int dbg_show_descriptors(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	int i, max_show = 20, burst, width;
+	u32 dcmd;
+	unsigned long phys_desc;
+	struct pxa_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&dma_channels[chan].lock, flags);
+	phys_desc = DDADR(chan);
+
+	pos += seq_printf(s, "DMA channel %d descriptors :\n", chan);
+	pos += seq_printf(s, "[%03d] First descriptor unknown\n", 0);
+	for (i = 1; i < max_show && is_phys_valid(phys_desc); i++) {
+		desc = phys_to_virt(phys_desc);
+		dcmd = desc->dcmd;
+		burst = dbg_burst_from_dcmd(dcmd);
+		width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+		pos += seq_printf(s, "[%03d] Desc at %08lx(virt %p)\n",
+				  i, phys_desc, desc);
+		pos += seq_printf(s, "\tDDADR = %08x\n", desc->ddadr);
+		pos += seq_printf(s, "\tDSADR = %08x\n", desc->dsadr);
+		pos += seq_printf(s, "\tDTADR = %08x\n", desc->dtadr);
+		pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d"
+				  " width=%d len=%d)\n",
+				  dcmd,
+				  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+				  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+				  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+				  DCMD_STR(ENDIAN), burst, width,
+				  dcmd & DCMD_LENGTH);
+		phys_desc = desc->ddadr;
+	}
+	if (i == max_show)
+		pos += seq_printf(s, "[%03d] Desc at %08lx ... max display reached\n",
+				  i, phys_desc);
+	else
+		pos += seq_printf(s, "[%03d] Desc at %08lx is %s\n",
+				  i, phys_desc, phys_desc == DDADR_STOP ?
+				  "DDADR_STOP" : "invalid");
+
+	spin_unlock_irqrestore(&dma_channels[chan].lock, flags);
+	return pos;
+}
+
+static int dbg_show_chan_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+	int chan = (int)s->private;
+	u32 dcsr, dcmd;
+	int burst, width;
+	static char *str_prio[] = { "high", "normal", "low" };
+
+	dcsr = DCSR(chan);
+	dcmd = DCMD(chan);
+	burst = dbg_burst_from_dcmd(dcmd);
+	width = (1 << ((dcmd >> 14) & 0x3)) >> 1;
+
+	pos += seq_printf(s, "DMA channel %d\n", chan);
+	pos += seq_printf(s, "\tPriority : %s\n",
+			  str_prio[dma_channels[chan].prio]);
+	pos += seq_printf(s, "\tUnaligned transfer bit: %s\n",
+			  DALGN & (1 << chan) ? "yes" : "no");
+	pos += seq_printf(s, "\tDCSR  = %08x (%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+			  dcsr, DCSR_STR(RUN), DCSR_STR(NODESC),
+			  DCSR_STR(STOPIRQEN), DCSR_STR(EORIRQEN),
+			  DCSR_STR(EORJMPEN), DCSR_STR(EORSTOPEN),
+			  DCSR_STR(SETCMPST), DCSR_STR(CLRCMPST),
+			  DCSR_STR(CMPST), DCSR_STR(EORINTR), DCSR_STR(REQPEND),
+			  DCSR_STR(STOPSTATE), DCSR_STR(ENDINTR),
+			  DCSR_STR(STARTINTR), DCSR_STR(BUSERR));
+
+	pos += seq_printf(s, "\tDCMD  = %08x (%s%s%s%s%s%s%sburst=%d width=%d"
+			  " len=%d)\n",
+			  dcmd,
+			  DCMD_STR(INCSRCADDR), DCMD_STR(INCTRGADDR),
+			  DCMD_STR(FLOWSRC), DCMD_STR(FLOWTRG),
+			  DCMD_STR(STARTIRQEN), DCMD_STR(ENDIRQEN),
+			  DCMD_STR(ENDIAN), burst, width, dcmd & DCMD_LENGTH);
+	pos += seq_printf(s, "\tDSADR = %08x\n", DSADR(chan));
+	pos += seq_printf(s, "\tDTADR = %08x\n", DTADR(chan));
+	pos += seq_printf(s, "\tDDADR = %08x\n", DDADR(chan));
+	return pos;
+}
+
+static int dbg_show_state(struct seq_file *s, void *p)
+{
+	int pos = 0;
+
+	/* basic device status */
+	pos += seq_printf(s, "DMA engine status\n");
+	pos += seq_printf(s, "\tChannel number: %d\n", num_dma_channels);
+
+	return pos;
+}
+
+#define DBGFS_FUNC_DECL(name) \
+static int dbg_open_##name(struct inode *inode, struct file *file) \
+{ \
+	return single_open(file, dbg_show_##name, inode->i_private); \
+} \
+static const struct file_operations dbg_fops_##name = { \
+	.owner		= THIS_MODULE, \
+	.open		= dbg_open_##name, \
+	.llseek		= seq_lseek, \
+	.read		= seq_read, \
+	.release	= single_release, \
+}
+
+DBGFS_FUNC_DECL(state);
+DBGFS_FUNC_DECL(chan_state);
+DBGFS_FUNC_DECL(descriptors);
+DBGFS_FUNC_DECL(requester_chan);
+
+static struct dentry *pxa_dma_dbg_alloc_chan(int ch, struct dentry *chandir)
+{
+	char chan_name[11];
+	struct dentry *chan, *chan_state = NULL, *chan_descr = NULL;
+	struct dentry *chan_reqs = NULL;
+	void *dt;
+
+	scnprintf(chan_name, sizeof(chan_name), "%d", ch);
+	chan = debugfs_create_dir(chan_name, chandir);
+	dt = (void *)ch;
+
+	if (chan)
+		chan_state = debugfs_create_file("state", 0400, chan, dt,
+						 &dbg_fops_chan_state);
+	if (chan_state)
+		chan_descr = debugfs_create_file("descriptors", 0400, chan, dt,
+						 &dbg_fops_descriptors);
+	if (chan_descr)
+		chan_reqs = debugfs_create_file("requesters", 0400, chan, dt,
+						&dbg_fops_requester_chan);
+	if (!chan_reqs)
+		goto err_state;
+
+	return chan;
+
+err_state:
+	debugfs_remove_recursive(chan);
+	return NULL;
+}
+
+static void pxa_dma_init_debugfs(void)
+{
+	int i;
+	struct dentry *chandir;
+
+	dbgfs_root = debugfs_create_dir(DMA_DEBUG_NAME, NULL);
+	if (IS_ERR(dbgfs_root) || !dbgfs_root)
+		goto err_root;
+
+	dbgfs_state = debugfs_create_file("state", 0400, dbgfs_root, NULL,
+					  &dbg_fops_state);
+	if (!dbgfs_state)
+		goto err_state;
+
+	dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
+			     GFP_KERNEL);
+	if (!dbgfs_state)
+		goto err_alloc;
+
+	chandir = debugfs_create_dir("channels", dbgfs_root);
+	if (!chandir)
+		goto err_chandir;
+
+	for (i = 0; i < num_dma_channels; i++) {
+		dbgfs_chan[i] = pxa_dma_dbg_alloc_chan(i, chandir);
+		if (!dbgfs_chan[i])
+			goto err_chans;
+	}
+
+	return;
+err_chans:
+err_chandir:
+	kfree(dbgfs_chan);
+err_alloc:
+err_state:
+	debugfs_remove_recursive(dbgfs_root);
+err_root:
+	pr_err("pxa_dma: debugfs is not available\n");
+}
+
+static void __exit pxa_dma_cleanup_debugfs(void)
+{
+	debugfs_remove_recursive(dbgfs_root);
+}
+#else
+static inline void pxa_dma_init_debugfs(void) {}
+static inline void pxa_dma_cleanup_debugfs(void) {}
+#endif
+
 int pxa_request_dma (char *name, pxa_dma_prio prio,
 			void (*irq_handler)(int, void *),
 			void *data)
@@ -71,6 +315,7 @@
 	local_irq_restore(flags);
 	return i;
 }
+EXPORT_SYMBOL(pxa_request_dma);
 
 void pxa_free_dma (int dma_ch)
 {
@@ -88,24 +333,26 @@
 	dma_channels[dma_ch].name = NULL;
 	local_irq_restore(flags);
 }
+EXPORT_SYMBOL(pxa_free_dma);
 
 static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 {
 	int i, dint = DINT;
+	struct dma_channel *channel;
 
-	for (i = 0; i < num_dma_channels; i++) {
-		if (dint & (1 << i)) {
-			struct dma_channel *channel = &dma_channels[i];
-			if (channel->name && channel->irq_handler) {
-				channel->irq_handler(i, channel->data);
-			} else {
-				/*
-				 * IRQ for an unregistered DMA channel:
-				 * let's clear the interrupts and disable it.
-				 */
-				printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
-				DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
-			}
+	while (dint) {
+		i = __ffs(dint);
+		dint &= (dint - 1);
+		channel = &dma_channels[i];
+		if (channel->name && channel->irq_handler) {
+			channel->irq_handler(i, channel->data);
+		} else {
+			/*
+			 * IRQ for an unregistered DMA channel:
+			 * let's clear the interrupts and disable it.
+			 */
+			printk (KERN_WARNING "spurious IRQ for DMA channel %d\n", i);
+			DCSR(i) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
 		}
 	}
 	return IRQ_HANDLED;
@@ -127,6 +374,7 @@
 	for (i = 0; i < num_ch; i++) {
 		DCSR(i) = 0;
 		dma_channels[i].prio = min((i & 0xf) >> 2, DMA_PRIO_LOW);
+		spin_lock_init(&dma_channels[i].lock);
 	}
 
 	ret = request_irq(irq, dma_irq_handler, IRQF_DISABLED, "DMA", NULL);
@@ -135,10 +383,9 @@
 		kfree(dma_channels);
 		return ret;
 	}
-
 	num_dma_channels = num_ch;
+
+	pxa_dma_init_debugfs();
+
 	return 0;
 }
-
-EXPORT_SYMBOL(pxa_request_dma);
-EXPORT_SYMBOL(pxa_free_dma);
diff --git a/arch/arm/plat-pxa/include/plat/mfp.h b/arch/arm/plat-pxa/include/plat/mfp.h
index 6401946..22086e6 100644
--- a/arch/arm/plat-pxa/include/plat/mfp.h
+++ b/arch/arm/plat-pxa/include/plat/mfp.h
@@ -150,6 +150,74 @@
 	MFP_PIN_GPIO125,
 	MFP_PIN_GPIO126,
 	MFP_PIN_GPIO127,
+
+	MFP_PIN_GPIO128,
+	MFP_PIN_GPIO129,
+	MFP_PIN_GPIO130,
+	MFP_PIN_GPIO131,
+	MFP_PIN_GPIO132,
+	MFP_PIN_GPIO133,
+	MFP_PIN_GPIO134,
+	MFP_PIN_GPIO135,
+	MFP_PIN_GPIO136,
+	MFP_PIN_GPIO137,
+	MFP_PIN_GPIO138,
+	MFP_PIN_GPIO139,
+	MFP_PIN_GPIO140,
+	MFP_PIN_GPIO141,
+	MFP_PIN_GPIO142,
+	MFP_PIN_GPIO143,
+	MFP_PIN_GPIO144,
+	MFP_PIN_GPIO145,
+	MFP_PIN_GPIO146,
+	MFP_PIN_GPIO147,
+	MFP_PIN_GPIO148,
+	MFP_PIN_GPIO149,
+	MFP_PIN_GPIO150,
+	MFP_PIN_GPIO151,
+	MFP_PIN_GPIO152,
+	MFP_PIN_GPIO153,
+	MFP_PIN_GPIO154,
+	MFP_PIN_GPIO155,
+	MFP_PIN_GPIO156,
+	MFP_PIN_GPIO157,
+	MFP_PIN_GPIO158,
+	MFP_PIN_GPIO159,
+	MFP_PIN_GPIO160,
+	MFP_PIN_GPIO161,
+	MFP_PIN_GPIO162,
+	MFP_PIN_GPIO163,
+	MFP_PIN_GPIO164,
+	MFP_PIN_GPIO165,
+	MFP_PIN_GPIO166,
+	MFP_PIN_GPIO167,
+	MFP_PIN_GPIO168,
+	MFP_PIN_GPIO169,
+	MFP_PIN_GPIO170,
+	MFP_PIN_GPIO171,
+	MFP_PIN_GPIO172,
+	MFP_PIN_GPIO173,
+	MFP_PIN_GPIO174,
+	MFP_PIN_GPIO175,
+	MFP_PIN_GPIO176,
+	MFP_PIN_GPIO177,
+	MFP_PIN_GPIO178,
+	MFP_PIN_GPIO179,
+	MFP_PIN_GPIO180,
+	MFP_PIN_GPIO181,
+	MFP_PIN_GPIO182,
+	MFP_PIN_GPIO183,
+	MFP_PIN_GPIO184,
+	MFP_PIN_GPIO185,
+	MFP_PIN_GPIO186,
+	MFP_PIN_GPIO187,
+	MFP_PIN_GPIO188,
+	MFP_PIN_GPIO189,
+	MFP_PIN_GPIO190,
+	MFP_PIN_GPIO191,
+
+	MFP_PIN_GPIO255 = 255,
+
 	MFP_PIN_GPIO0_2,
 	MFP_PIN_GPIO1_2,
 	MFP_PIN_GPIO2_2,
@@ -325,8 +393,9 @@
 #define MFP_PULL_LOW		(0x1 << 21)
 #define MFP_PULL_HIGH		(0x2 << 21)
 #define MFP_PULL_BOTH		(0x3 << 21)
-#define MFP_PULL_MASK		(0x3 << 21)
-#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+#define MFP_PULL_FLOAT		(0x4 << 21)
+#define MFP_PULL_MASK		(0x7 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x7)
 
 #define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
 				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index e716c62..9405d03 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -77,11 +77,13 @@
  * MFPR_PULL_LOW        1         0        1
  * MFPR_PULL_HIGH       1         1        0
  * MFPR_PULL_BOTH       1         1        1
+ * MFPR_PULL_FLOAT	1         0        0
  */
 #define MFPR_PULL_NONE		(0)
 #define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
 #define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
 #define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+#define MFPR_PULL_FLOAT		(MFPR_PULL_SEL)
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
@@ -116,6 +118,7 @@
 	MFPR_PULL_LOW,
 	MFPR_PULL_HIGH,
 	MFPR_PULL_BOTH,
+	MFPR_PULL_FLOAT,
 };
 
 /* mapping of MFP_LPM_EDGE_* definitions to MFPR_EDGE_* register bits */
diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c
index 260fdc6..5ff24e0 100644
--- a/arch/arm/plat-s3c/gpio.c
+++ b/arch/arm/plat-s3c/gpio.c
@@ -28,7 +28,7 @@
 
 	gpn = chip->chip.base;
 	for (i = 0; i < chip->chip.ngpio; i++, gpn++) {
-		BUG_ON(gpn > ARRAY_SIZE(s3c_gpios));
+		BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios));
 		s3c_gpios[gpn] = chip;
 	}
 }
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index 2d0852a..c2cef61 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -2,8 +2,11 @@
 #define _ARCH_MCI_H
 
 struct s3c24xx_mci_pdata {
+	unsigned int	no_wprotect : 1;
+	unsigned int	no_detect : 1;
 	unsigned int	wprotect_invert : 1;
 	unsigned int	detect_invert : 1;   /* set => detect active high. */
+	unsigned int	use_dma : 1;
 
 	unsigned int	gpio_detect;
 	unsigned int	gpio_wprotect;
diff --git a/arch/arm/plat-s3c64xx/dma.c b/arch/arm/plat-s3c64xx/dma.c
index 67aa93d..266a107 100644
--- a/arch/arm/plat-s3c64xx/dma.c
+++ b/arch/arm/plat-s3c64xx/dma.c
@@ -345,13 +345,13 @@
 	if (!chan)
 		return -EINVAL;
 
-	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+	buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_ATOMIC);
 	if (!buff) {
 		printk(KERN_ERR "%s: no memory for buffer\n", __func__);
 		return -ENOMEM;
 	}
 
-	lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+	lli = dma_pool_alloc(dma_pool, GFP_ATOMIC, &buff->lli_dma);
 	if (!lli) {
 		printk(KERN_ERR "%s: no memory for lli\n", __func__);
 		ret = -ENOMEM;
@@ -697,7 +697,7 @@
 
 	printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
 
-	dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+	dma_pool = dma_pool_create("DMA-LLI", NULL, sizeof(struct pl080s_lli), 16, 0);
 	if (!dma_pool) {
 		printk(KERN_ERR "%s: failed to create pool\n", __func__);
 		return -ENOMEM;
diff --git a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
index 0c30dd9..8f76a1e 100644
--- a/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+++ b/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
@@ -26,7 +26,7 @@
 	struct s3c64xx_dma_buff *next;
 
 	void			*pw;
-	struct pl080_lli	*lli;
+	struct pl080s_lli	*lli;
 	dma_addr_t		 lli_dma;
 };
 
diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h
index 743a700..7956fd3 100644
--- a/arch/arm/plat-s3c64xx/include/plat/irqs.h
+++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h
@@ -194,9 +194,17 @@
 
 #define IRQ_EINT_GROUP(group, no)	(IRQ_EINT_GROUP##group##_BASE + (no))
 
+/* Define a group of interrupts for board-specific use (eg, for MFD
+ * interrupt controllers). */
+#define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+
+#define IRQ_BOARD_NR 16
+
+#define IRQ_BOARD_END (IRQ_BOARD_START + IRQ_BOARD_NR)
+
 /* Set the default NR_IRQS */
 
-#define NR_IRQS	(IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1)
+#define NR_IRQS	(IRQ_BOARD_END + 1)
 
 #endif /* __ASM_PLAT_S3C64XX_IRQS_H */
 
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index febac19..9745852 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -302,8 +302,8 @@
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
@@ -328,6 +328,8 @@
 		clksrc |= src_nr << sclk->shift;
 
 		__raw_writel(clksrc, S3C_CLK_SRC);
+
+		clk->parent = parent;
 		return 0;
 	}
 
@@ -343,7 +345,7 @@
 	if (rate > parent_rate)
 		rate = parent_rate;
 	else {
-		div = rate / parent_rate;
+		div = parent_rate / rate;
 
 		if (div == 0)
 			div = 1;
diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c
index d2f4977..ef88f25 100644
--- a/arch/arm/plat-stmp3xxx/dma.c
+++ b/arch/arm/plat-stmp3xxx/dma.c
@@ -264,7 +264,7 @@
 					stmp3xxx_dma_free_command(ch,
 								  &descriptors
 								  [i]);
-				} while (i-- >= 0);
+				} while (i-- > 0);
 			}
 			return err;
 		}
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c8c55b4..94be7bb 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Sep 12 12:00:16 2009
+# Last update: Fri Sep 18 21:42:00 2009
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1638,7 +1638,7 @@
 aml_m8050		MACH_AML_M8050		AML_M8050		1644
 mx35_3ds		MACH_MX35_3DS		MX35_3DS		1645
 mars			MACH_MARS		MARS			1646
-ntosd_644xa		MACH_NTOSD_644XA	NTOSD_644XA		1647
+neuros_osd2		MACH_NEUROS_OSD2	NEUROS_OSD2		1647
 badger			MACH_BADGER		BADGER			1648
 trizeps4wl		MACH_TRIZEPS4WL		TRIZEPS4WL		1649
 trizeps5		MACH_TRIZEPS5		TRIZEPS5		1650
@@ -1654,7 +1654,7 @@
 zoran43xx		MACH_ZORAN43XX		ZORAN43XX		1660
 sonix926		MACH_SONIX926		SONIX926		1661
 celestialsemi		MACH_CELESTIALSEMI	CELESTIALSEMI		1662
-cc9m2443		MACH_CC9M2443		CC9M2443		1663
+cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1663
 tw5334			MACH_TW5334		TW5334			1664
 omap_htcartemis		MACH_HTCARTEMIS		HTCARTEMIS		1665
 nal_hlite		MACH_NAL_HLITE		NAL_HLITE		1666
@@ -1802,7 +1802,7 @@
 rd88f5181l_ge		MACH_RD88F5181L_GE	RD88F5181L_GE		1812
 sifmain			MACH_SIFMAIN		SIFMAIN			1813
 sam9_l9261		MACH_SAM9_L9261		SAM9_L9261		1814
-cc9m2443js		MACH_CC9M2443JS		CC9M2443JS		1815
+cc9m2443		MACH_CC9M2443		CC9M2443		1815
 xaria300		MACH_XARIA300		XARIA300		1816
 it9200			MACH_IT9200		IT9200			1817
 rd88f5181l_fxo		MACH_RD88F5181L_FXO	RD88F5181L_FXO		1818
@@ -2409,3 +2409,15 @@
 pss2			MACH_PSS2		PSS2			2423
 davinci_apm150		MACH_DAVINCI_APM150	DAVINCI_APM150		2424
 str9100			MACH_STR9100		STR9100			2425
+net5big			MACH_NET5BIG		NET5BIG			2426
+seabed9263		MACH_SEABED9263		SEABED9263		2427
+mx51_m2id		MACH_MX51_M2ID		MX51_M2ID		2428
+octvocplus_eb		MACH_OCTVOCPLUS_EB	OCTVOCPLUS_EB		2429
+klk_firefox		MACH_KLK_FIREFOX	KLK_FIREFOX		2430
+klk_wirma_module	MACH_KLK_WIRMA_MODULE	KLK_WIRMA_MODULE	2431
+klk_wirma_mmi		MACH_KLK_WIRMA_MMI	KLK_WIRMA_MMI		2432
+supersonic		MACH_SUPERSONIC		SUPERSONIC		2433
+liberty			MACH_LIBERTY		LIBERTY			2434
+mh355			MACH_MH355		MH355			2435
+pc7802			MACH_PC7802		PC7802			2436
+gnet_sgc		MACH_GNET_SGC		GNET_SGC		2437
diff --git a/arch/avr32/include/asm/socket.h b/arch/avr32/include/asm/socket.h
index fe863f9..c8d1fae 100644
--- a/arch/avr32/include/asm/socket.h
+++ b/arch/avr32/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* __ASM_AVR32_SOCKET_H */
diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S
index 7ee0057..e76bad1 100644
--- a/arch/avr32/kernel/syscall_table.S
+++ b/arch/avr32/kernel/syscall_table.S
@@ -295,4 +295,5 @@
 	.long	sys_signalfd
 	.long	sys_ni_syscall		/* 280, was sys_timerfd */
 	.long	sys_eventfd
+	.long	sys_recvmmsg
 	.long	sys_ni_syscall		/* r8 is saturated at nr_syscalls */
diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S
index 21ac7c2..ffd90fb 100644
--- a/arch/blackfin/kernel/vmlinux.lds.S
+++ b/arch/blackfin/kernel/vmlinux.lds.S
@@ -96,8 +96,7 @@
 	{
 		__sdata = .;
 		/* This gets done first, so the glob doesn't suck it in */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(32)
 
 #if !L1_DATA_A_LENGTH
 		. = ALIGN(32);
@@ -116,12 +115,7 @@
 		DATA_DATA
 		CONSTRUCTORS
 
-		/* make sure the init_task is aligned to the
-		 * kernel thread size so we can locate the kernel
-		 * stack properly and quickly.
-		 */
-		. = ALIGN(THREAD_SIZE);
-		*(.init_task.data)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 		__edata = .;
 	}
@@ -134,39 +128,10 @@
 	. = ALIGN(PAGE_SIZE);
 	___init_begin = .;
 
-	.init.text :
-	{
-		. = ALIGN(PAGE_SIZE);
-		__sinittext = .;
-		INIT_TEXT
-		__einittext = .;
-	}
-	.init.data :
-	{
-		. = ALIGN(16);
-		INIT_DATA
-	}
-	.init.setup :
-	{
-		. = ALIGN(16);
-		___setup_start = .;
-		*(.init.setup)
-		___setup_end = .;
-	}
-	.initcall.init :
-	{
-		___initcall_start = .;
-		INITCALLS
-		___initcall_end = .;
-	}
-	.con_initcall.init :
-	{
-		___con_initcall_start = .;
-		*(.con_initcall.init)
-		___con_initcall_end = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
+	. = ALIGN(16);
+	INIT_DATA_SECTION(16)
 	PERCPU(4)
-	SECURITY_INIT
 
 	/* we have to discard exit text and such at runtime, not link time, to
 	 * handle embedded cross-section references (alt instructions, bug
@@ -181,18 +146,9 @@
 		EXIT_DATA
 	}
 
-	.init.ramfs :
-	{
-		. = ALIGN(4);
-		___initramfs_start = .;
-		*(.init.ramfs)
-		. = ALIGN(4);
-		___initramfs_end = .;
-	}
-
 	__l1_lma_start = .;
 
-	.text_l1 L1_CODE_START : AT(LOADADDR(.init.ramfs) + SIZEOF(.init.ramfs))
+	.text_l1 L1_CODE_START : AT(LOADADDR(.exit.data) + SIZEOF(.exit.data))
 	{
 		. = ALIGN(4);
 		__stext_l1 = .;
diff --git a/arch/blackfin/mach-bf561/coreb.c b/arch/blackfin/mach-bf561/coreb.c
index 93635a7..1e60a92 100644
--- a/arch/blackfin/mach-bf561/coreb.c
+++ b/arch/blackfin/mach-bf561/coreb.c
@@ -48,7 +48,7 @@
 	return ret;
 }
 
-static struct file_operations coreb_fops = {
+static const struct file_operations coreb_fops = {
 	.owner   = THIS_MODULE,
 	.ioctl   = coreb_ioctl,
 };
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 1e7cac2..4869272 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -1621,6 +1621,7 @@
 	.long _sys_pwritev
 	.long _sys_rt_tgsigqueueinfo
 	.long _sys_perf_event_open
+	.long _sys_recvmmsg		/* 370 */
 
 	.rept NR_syscalls-(.-_sys_call_table)/4
 	.long _sys_ni_syscall
diff --git a/arch/cris/arch-v10/drivers/sync_serial.c b/arch/cris/arch-v10/drivers/sync_serial.c
index 6cc1a03..562b9a7f 100644
--- a/arch/cris/arch-v10/drivers/sync_serial.c
+++ b/arch/cris/arch-v10/drivers/sync_serial.c
@@ -244,7 +244,7 @@
 
 #define NUMBER_OF_PORTS 2
 
-static struct file_operations sync_serial_fops = {
+static const struct file_operations sync_serial_fops = {
 	.owner   = THIS_MODULE,
 	.write   = sync_serial_write,
 	.read    = sync_serial_read,
diff --git a/arch/cris/arch-v10/kernel/time.c b/arch/cris/arch-v10/kernel/time.c
index 2b73c7a..31ca141 100644
--- a/arch/cris/arch-v10/kernel/time.c
+++ b/arch/cris/arch-v10/kernel/time.c
@@ -28,7 +28,6 @@
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 unsigned long get_ns_in_jiffie(void)
diff --git a/arch/cris/arch-v32/drivers/mach-fs/gpio.c b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
index fe1fde8..d89ab80 100644
--- a/arch/cris/arch-v32/drivers/mach-fs/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-fs/gpio.c
@@ -855,7 +855,7 @@
 	return 0;
 }
 
-struct file_operations gpio_fops = {
+static const struct file_operations gpio_fops = {
 	.owner       = THIS_MODULE,
 	.poll        = gpio_poll,
 	.ioctl       = gpio_ioctl,
diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c
index d2a3ff8..058addd 100644
--- a/arch/cris/arch-v32/kernel/smp.c
+++ b/arch/cris/arch-v32/kernel/smp.c
@@ -52,8 +52,6 @@
 static struct vm_area_struct* flush_vma;
 static unsigned long flush_addr;
 
-extern int setup_irq(int, struct irqaction *);
-
 /* Mode registers */
 static unsigned long irq_regs[NR_CPUS] = {
   regi_irq,
diff --git a/arch/cris/arch-v32/kernel/time.c b/arch/cris/arch-v32/kernel/time.c
index 65633d0..b1920d8 100644
--- a/arch/cris/arch-v32/kernel/time.c
+++ b/arch/cris/arch-v32/kernel/time.c
@@ -46,7 +46,6 @@
 
 extern void update_xtime_from_cmos(void);
 extern int set_rtc_mmss(unsigned long nowtime);
-extern int setup_irq(int, struct irqaction *);
 extern int have_rtc;
 
 #ifdef CONFIG_CPU_FREQ
diff --git a/arch/cris/arch-v32/mach-a3/io.c b/arch/cris/arch-v32/mach-a3/io.c
index c22f67e..090ceb9 100644
--- a/arch/cris/arch-v32/mach-a3/io.c
+++ b/arch/cris/arch-v32/mach-a3/io.c
@@ -36,7 +36,7 @@
 	},
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
diff --git a/arch/cris/arch-v32/mach-fs/io.c b/arch/cris/arch-v32/mach-fs/io.c
index cb6327b..a695866 100644
--- a/arch/cris/arch-v32/mach-fs/io.c
+++ b/arch/cris/arch-v32/mach-fs/io.c
@@ -52,7 +52,7 @@
 	}
 };
 
-#define NBR_OF_PORTS sizeof(crisv32_ioports)/sizeof(struct crisv32_ioport)
+#define NBR_OF_PORTS ARRAY_SIZE(crisv32_ioports)
 
 struct crisv32_iopin crisv32_led_net0_green;
 struct crisv32_iopin crisv32_led_net0_red;
diff --git a/arch/cris/include/arch-v10/arch/mmu.h b/arch/cris/include/arch-v10/arch/mmu.h
index df84f17..e829e5a 100644
--- a/arch/cris/include/arch-v10/arch/mmu.h
+++ b/arch/cris/include/arch-v10/arch/mmu.h
@@ -33,10 +33,10 @@
 
 /* CRIS PTE bits (see R_TLB_LO in the register description)
  *
- *   Bit:  31-13 12-------4    3        2       1       0  
- *         ________________________________________________
- *        | pfn | reserved | global | valid | kernel | we  |
- *        |_____|__________|________|_______|________|_____|
+ *   Bit:  31     30-13 12-------4    3        2       1       0
+ *         _______________________________________________________
+ *        | cache |pfn | reserved | global | valid | kernel | we  |
+ *        |_______|____|__________|________|_______|________|_____|
  *
  * (pfn = physical frame number)
  */
@@ -53,6 +53,7 @@
 #define _PAGE_VALID	   (1<<2) /* page is valid */
 #define _PAGE_SILENT_READ  (1<<2) /* synonym */
 #define _PAGE_GLOBAL       (1<<3) /* global page - context is ignored */
+#define _PAGE_NO_CACHE	   (1<<31) /* part of the uncached memory map */
 
 /* Bits the HW doesn't care about but the kernel uses them in SW */
 
diff --git a/arch/cris/include/arch-v32/arch/mmu.h b/arch/cris/include/arch-v32/arch/mmu.h
index 6bcdc3f..c1a13e0 100644
--- a/arch/cris/include/arch-v32/arch/mmu.h
+++ b/arch/cris/include/arch-v32/arch/mmu.h
@@ -28,10 +28,10 @@
 /*
  * CRISv32 PTE bits:
  *
- *  Bit:  31-13  12-5     4        3       2        1        0
- *       +-----+------+--------+-------+--------+-------+---------+
- *       | pfn | zero | global | valid | kernel | write | execute |
- *       +-----+------+--------+-------+--------+-------+---------+
+ *  Bit:   31     30-13  12-5     4        3       2        1        0
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
+ *       | cache | pfn | zero | global | valid | kernel | write | execute |
+ *       +-------+-----+------+--------+-------+--------+-------+---------+
  */
 
 /*
@@ -45,6 +45,8 @@
 #define _PAGE_VALID         (1 << 3)	/* Page is valid. */
 #define _PAGE_SILENT_READ   (1 << 3)	/* Same as above. */
 #define _PAGE_GLOBAL        (1 << 4)	/* Global page. */
+#define _PAGE_NO_CACHE	    (1 << 31)	/* part of the uncached memory map */
+
 
 /*
  * The hardware doesn't care about these bits, but the kernel uses them in
diff --git a/arch/cris/include/asm/hardirq.h b/arch/cris/include/asm/hardirq.h
index 74178ad..17bb12d 100644
--- a/arch/cris/include/asm/hardirq.h
+++ b/arch/cris/include/asm/hardirq.h
@@ -2,16 +2,6 @@
 #define __ASM_HARDIRQ_H
 
 #include <asm/irq.h>
-#include <linux/threads.h>
-#include <linux/cache.h>
-
-typedef struct {
-	unsigned int __softirq_pending;
-} ____cacheline_aligned irq_cpustat_t;
-
-#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */
-
-void ack_bad_irq(unsigned int irq);
 
 #define HARDIRQ_BITS	8
 
@@ -24,4 +14,6 @@
 # error HARDIRQ_BITS is too low!
 #endif
 
+#include <asm-generic/hardirq.h>
+
 #endif /* __ASM_HARDIRQ_H */
diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h
index 50aa974..1fcce00 100644
--- a/arch/cris/include/asm/pgtable.h
+++ b/arch/cris/include/asm/pgtable.h
@@ -197,6 +197,8 @@
 static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
 { pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); return pte; }
 
+#define pgprot_noncached(prot) __pgprot((pgprot_val(prot) | _PAGE_NO_CACHE))
+
 
 /* pte_val refers to a page in the 0x4xxxxxxx physical DRAM interval
  * __pte_page(pte_val) refers to the "virtual" DRAM interval
diff --git a/arch/cris/include/asm/socket.h b/arch/cris/include/asm/socket.h
index 45ec49b..1a4a619 100644
--- a/arch/cris/include/asm/socket.h
+++ b/arch/cris/include/asm/socket.h
@@ -62,6 +62,8 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
 
diff --git a/arch/cris/kernel/irq.c b/arch/cris/kernel/irq.c
index 7f642fc..0ca7d98 100644
--- a/arch/cris/kernel/irq.c
+++ b/arch/cris/kernel/irq.c
@@ -38,11 +38,6 @@
 
 #include <asm/io.h>
 
-void ack_bad_irq(unsigned int irq)
-{
-	printk("unexpected IRQ trap at vector %02x\n", irq);
-}
-
 int show_interrupts(struct seq_file *p, void *v)
 {
 	int i = *(loff_t *) v, j;
diff --git a/arch/cris/kernel/vmlinux.lds.S b/arch/cris/kernel/vmlinux.lds.S
index 6c81836..bbfda67 100644
--- a/arch/cris/kernel/vmlinux.lds.S
+++ b/arch/cris/kernel/vmlinux.lds.S
@@ -51,10 +51,7 @@
 	_etext = . ;			/* End of text section. */
 	__etext = .;
 
-	. = ALIGN(4);			/* Exception table. */
-	__start___ex_table = .;
-	__ex_table : { *(__ex_table) }
-	__stop___ex_table = .;
+	EXCEPTION_TABLE(4)
 
 	RODATA
 
@@ -67,36 +64,24 @@
 	__edata = . ;			/* End of data section. */
 	_edata = . ;
 
-	. = ALIGN(PAGE_SIZE);	/* init_task and stack, must be aligned. */
-	.data.init_task : { *(.data.init_task) }
+	INIT_TASK_DATA_SECTION(PAGE_SIZE)
 
 	. = ALIGN(PAGE_SIZE);		/* Init code and data. */
 	__init_begin = .;
-	.init.text : {
-		   _sinittext = .;
-		   INIT_TEXT
-		   _einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 	.init.data : { INIT_DATA }
-	. = ALIGN(16);
-	__setup_start = .;
-	.init.setup : { *(.init.setup) }
-	__setup_end = .;
+	.init.setup : { INIT_SETUP(16) }
 #ifdef CONFIG_ETRAX_ARCH_V32
 	__start___param = .;
 	__param : { *(__param) }
 	__stop___param = .;
 #endif
 	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
+		INIT_CALLS
 	}
 
 	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 	SECURITY_INIT
 
@@ -114,9 +99,7 @@
 	PERCPU(PAGE_SIZE)
 
 	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
 #endif
 
@@ -130,11 +113,7 @@
 	__init_end = .;
 
 	__data_end = . ;		/* Move to _edata ? */
-	__bss_start = .;		/* BSS. */
-	.bss : {
-		*(COMMON)
-		*(.bss)
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. =  ALIGN (0x20);
 	_end = .;
diff --git a/arch/frv/include/asm/socket.h b/arch/frv/include/asm/socket.h
index 2dea726..a6b2688 100644
--- a/arch/frv/include/asm/socket.h
+++ b/arch/frv/include/asm/socket.h
@@ -60,5 +60,7 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
 
diff --git a/arch/frv/mb93090-mb00/Makefile b/arch/frv/mb93090-mb00/Makefile
index 76595e8..b73b542 100644
--- a/arch/frv/mb93090-mb00/Makefile
+++ b/arch/frv/mb93090-mb00/Makefile
@@ -11,3 +11,5 @@
 obj-y += pci-dma-nommu.o
 endif
 endif
+
+obj-$(CONFIG_MTD) += flash.o
diff --git a/arch/frv/mb93090-mb00/flash.c b/arch/frv/mb93090-mb00/flash.c
new file mode 100644
index 0000000..c0e3707
--- /dev/null
+++ b/arch/frv/mb93090-mb00/flash.c
@@ -0,0 +1,90 @@
+/* Flash mappings for the MB93090-MB00 motherboard
+ *
+ * Copyright (C) 2009 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#define MB93090_BOOTROM_ADDR	0xFF000000	/* Boot ROM */
+#define MB93090_BOOTROM_SIZE	(2 * 1024 * 1024)
+#define MB93090_USERROM_ADDR	0xFF200000	/* User ROM */
+#define MB93090_USERROM_SIZE	(2 * 1024 * 1024)
+
+/*
+ * default MTD partition table for both main flash devices, expected to be
+ * overridden by RedBoot
+ */
+static struct mtd_partition mb93090_partitions[] = {
+	{
+		.name		= "Filesystem",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0,
+	}
+};
+
+/*
+ * Definition of the MB93090 Boot ROM (on the CPU card)
+ */
+static struct physmap_flash_data mb93090_bootrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_bootrom_resource = {
+	.start		= MB93090_BOOTROM_ADDR,
+	.end		= MB93090_BOOTROM_ADDR + MB93090_BOOTROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_bootrom = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev.platform_data = &mb93090_bootrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_bootrom_resource,
+};
+
+/*
+ * Definition of the MB93090 User ROM definition (on the motherboard)
+ */
+static struct physmap_flash_data mb93090_userrom_data = {
+	.width		= 2,
+	.nr_parts	= 2,
+	.parts		= mb93090_partitions,
+};
+
+static struct resource mb93090_userrom_resource = {
+	.start		= MB93090_USERROM_ADDR,
+	.end		= MB93090_USERROM_ADDR + MB93090_USERROM_SIZE - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device mb93090_userrom = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev.platform_data = &mb93090_userrom_data,
+	.num_resources	= 1,
+	.resource	= &mb93090_userrom_resource,
+};
+
+/*
+ * register the MB93090 flashes
+ */
+static int __init mb93090_mtd_init(void)
+{
+	platform_device_register(&mb93090_bootrom);
+	platform_device_register(&mb93090_userrom);
+	return 0;
+}
+
+module_init(mb93090_mtd_init);
diff --git a/arch/h8300/include/asm/socket.h b/arch/h8300/include/asm/socket.h
index 1547f01..04c0f45 100644
--- a/arch/h8300/include/asm/socket.h
+++ b/arch/h8300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S
index 662b02e..b9e24907 100644
--- a/arch/h8300/kernel/vmlinux.lds.S
+++ b/arch/h8300/kernel/vmlinux.lds.S
@@ -1,5 +1,6 @@
 #define VMLINUX_SYMBOL(_sym_) _##_sym_
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
 
 /* target memory map */
 #ifdef CONFIG_H8300H_GENERIC
@@ -79,11 +80,8 @@
 	SCHED_TEXT
 	LOCK_TEXT
 	__etext = . ;
-	. = ALIGN(16);          /* Exception table              */
-	___start___ex_table = .;
-		*(__ex_table)
-	___stop___ex_table = .;
 	}
+	EXCEPTION_TABLE(16)
 
 	RODATA
 #if defined(CONFIG_ROMKERNEL)
@@ -100,8 +98,7 @@
 	__sdata = . ;
 	___data_start = . ;
 
-	. = ALIGN(0x2000) ;
-		*(.data.init_task)
+	INIT_TASK_DATA(0x2000)
 	. = ALIGN(0x4) ;
 		DATA_DATA
 	. = ALIGN(0x4) ;
@@ -114,24 +111,16 @@
 	__einittext = .; 
 		INIT_DATA
 	. = ALIGN(0x4) ;
+	INIT_SETUP(0x4)
 	___setup_start = .;
 		*(.init.setup)
 	. = ALIGN(0x4) ;
 	___setup_end = .;
-	___initcall_start = .;
-		INITCALLS
-	___initcall_end = .;
-	___con_initcall_start = .;
-		*(.con_initcall.init)
-	___con_initcall_end = .;
+	INIT_CALLS
+	CON_INITCALL
 		EXIT_TEXT
 		EXIT_DATA
-#if defined(CONFIG_BLK_DEV_INITRD)
-		. = ALIGN(4);
-	___initramfs_start = .;
-  		*(.init.ramfs)
-  	___initramfs_end = .;
-#endif
+	INIT_RAM_FS
 	. = ALIGN(0x4) ;
 	___init_end = .;
 	__edata = . ;
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6851e52..1ee596c 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -60,9 +60,7 @@
        bool
 
 config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
+	def_bool n
 
 config RWSEM_XCHGADD_ALGORITHM
 	bool
diff --git a/arch/ia64/ia32/binfmt_elf32.c b/arch/ia64/ia32/binfmt_elf32.c
index f92bdaa..c69552b 100644
--- a/arch/ia64/ia32/binfmt_elf32.c
+++ b/arch/ia64/ia32/binfmt_elf32.c
@@ -69,11 +69,11 @@
 }
 
 
-static struct vm_operations_struct ia32_shared_page_vm_ops = {
+static const struct vm_operations_struct ia32_shared_page_vm_ops = {
 	.fault = ia32_install_shared_page
 };
 
-static struct vm_operations_struct ia32_gate_page_vm_ops = {
+static const struct vm_operations_struct ia32_gate_page_vm_ops = {
 	.fault = ia32_install_gate_page
 };
 
diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index 0f82cc2..91df968 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -89,10 +89,12 @@
 #define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq)				\
 	((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
 
+#ifdef	CONFIG_ACPI
 #define acpi_disabled 0	/* ACPI always enabled on IA64 */
 #define acpi_noirq 0	/* ACPI always enabled on IA64 */
 #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */
 #define acpi_strict 1	/* no ACPI spec workarounds on IA64 */
+#endif
 #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */
 static inline void disable_acpi(void) { }
 
diff --git a/arch/ia64/include/asm/socket.h b/arch/ia64/include/asm/socket.h
index 0b0d5ff..51427ea 100644
--- a/arch/ia64/include/asm/socket.h
+++ b/arch/ia64/include/asm/socket.h
@@ -69,4 +69,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_IA64_SOCKET_H */
diff --git a/arch/ia64/include/asm/spinlock.h b/arch/ia64/include/asm/spinlock.h
index 13ab715..30bb930 100644
--- a/arch/ia64/include/asm/spinlock.h
+++ b/arch/ia64/include/asm/spinlock.h
@@ -19,103 +19,106 @@
 
 #define __raw_spin_lock_init(x)			((x)->lock = 0)
 
-#ifdef ASM_SUPPORTED
 /*
- * Try to get the lock.  If we fail to get the lock, make a non-standard call to
- * ia64_spinlock_contention().  We do not use a normal call because that would force all
- * callers of __raw_spin_lock() to be non-leaf routines.  Instead, ia64_spinlock_contention() is
- * carefully coded to touch only those registers that __raw_spin_lock() marks "clobbered".
+ * Ticket locks are conceptually two parts, one indicating the current head of
+ * the queue, and the other indicating the current tail. The lock is acquired
+ * by atomically noting the tail and incrementing it by one (thus adding
+ * ourself to the queue and noting our position), then waiting until the head
+ * becomes equal to the the initial value of the tail.
+ *
+ *   63                     32  31                      0
+ *  +----------------------------------------------------+
+ *  |  next_ticket_number      |     now_serving         |
+ *  +----------------------------------------------------+
  */
 
-#define IA64_SPINLOCK_CLOBBERS "ar.ccv", "ar.pfs", "p14", "p15", "r27", "r28", "r29", "r30", "b6", "memory"
+#define TICKET_SHIFT	32
 
-static inline void
-__raw_spin_lock_flags (raw_spinlock_t *lock, unsigned long flags)
+static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
-	register volatile unsigned int *ptr asm ("r31") = &lock->lock;
+	int	*p = (int *)&lock->lock, turn, now_serving;
 
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention_pre3_4;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) br.cond.spnt.many b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("{\n\t"
-		      "  mov ar.ccv = r0\n\t"
-		      "  mov r28 = ip\n\t"
-		      "  mov r30 = 1;;\n\t"
-		      "}\n\t"
-		      "cmpxchg4.acq r30 = [%1], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov r27=%2\n\t"
-		      "(p14) brl.cond.spnt.many ia64_spinlock_contention_pre3_4;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#else
-# ifdef CONFIG_ITANIUM
-	/* don't use brl on Itanium... */
-	/* mis-declare, so we get the entry-point, not it's function descriptor: */
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv\n\t"
-		      "movl r29 = ia64_spinlock_contention;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "mov b6 = r29;;\n\t"
-		      "(p14) br.call.spnt.many b6 = b6"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# else
-	asm volatile ("mov r30 = 1\n\t"
-		      "mov r27=%2\n\t"
-		      "mov ar.ccv = r0;;\n\t"
-		      "cmpxchg4.acq r30 = [%0], r30, ar.ccv;;\n\t"
-		      "cmp4.ne p14, p0 = r30, r0\n\t"
-		      "(p14) brl.call.spnt.many b6=ia64_spinlock_contention;;"
-		      : "=r"(ptr) : "r"(ptr), "r" (flags) : IA64_SPINLOCK_CLOBBERS);
-# endif /* CONFIG_MCKINLEY */
-#endif
+	now_serving = *p;
+	turn = ia64_fetchadd(1, p+1, acq);
+
+	if (turn == now_serving)
+		return;
+
+	do {
+		cpu_relax();
+	} while (ACCESS_ONCE(*p) != turn);
 }
 
-#define __raw_spin_lock(lock) __raw_spin_lock_flags(lock, 0)
+static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock), try;
 
-/* Unlock by doing an ordered store and releasing the cacheline with nta */
-static inline void __raw_spin_unlock(raw_spinlock_t *x) {
-	barrier();
-	asm volatile ("st4.rel.nta [%0] = r0\n\t" :: "r"(x));
+	if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) {
+		try = tmp + (1L << TICKET_SHIFT);
+
+		return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp;
+	}
+	return 0;
 }
 
-#else /* !ASM_SUPPORTED */
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
-# define __raw_spin_lock(x)								\
-do {											\
-	__u32 *ia64_spinlock_ptr = (__u32 *) (x);					\
-	__u64 ia64_spinlock_val;							\
-	ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);			\
-	if (unlikely(ia64_spinlock_val)) {						\
-		do {									\
-			while (*ia64_spinlock_ptr)					\
-				ia64_barrier();						\
-			ia64_spinlock_val = ia64_cmpxchg4_acq(ia64_spinlock_ptr, 1, 0);	\
-		} while (ia64_spinlock_val);						\
-	}										\
-} while (0)
-#define __raw_spin_unlock(x)	do { barrier(); ((raw_spinlock_t *) x)->lock = 0; } while (0)
-#endif /* !ASM_SUPPORTED */
+static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
+{
+	int	*p = (int *)&lock->lock;
 
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_trylock(x)		(cmpxchg_acq(&(x)->lock, 0, 1) == 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+	(void)ia64_fetchadd(1, p, rel);
+}
+
+static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
+
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1));
+}
+
+static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
+{
+	long tmp = ACCESS_ONCE(lock->lock);
+
+	return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1;
+}
+
+static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_locked(lock);
+}
+
+static inline int __raw_spin_is_contended(raw_spinlock_t *lock)
+{
+	return __ticket_spin_is_contended(lock);
+}
+#define __raw_spin_is_contended	__raw_spin_is_contended
+
+static __always_inline void __raw_spin_lock(raw_spinlock_t *lock)
+{
+	__ticket_spin_lock(lock);
+}
+
+static __always_inline int __raw_spin_trylock(raw_spinlock_t *lock)
+{
+	return __ticket_spin_trylock(lock);
+}
+
+static __always_inline void __raw_spin_unlock(raw_spinlock_t *lock)
+{
+	__ticket_spin_unlock(lock);
+}
+
+static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
+						  unsigned long flags)
+{
+	__raw_spin_lock(lock);
+}
+
+static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	while (__raw_spin_is_locked(lock))
+		cpu_relax();
+}
 
 #define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)
 #define __raw_write_can_lock(rw)	(*(volatile int *)(rw) == 0)
diff --git a/arch/ia64/include/asm/spinlock_types.h b/arch/ia64/include/asm/spinlock_types.h
index 474e46f..b61d136 100644
--- a/arch/ia64/include/asm/spinlock_types.h
+++ b/arch/ia64/include/asm/spinlock_types.h
@@ -6,7 +6,7 @@
 #endif
 
 typedef struct {
-	volatile unsigned int lock;
+	volatile unsigned long lock;
 } raw_spinlock_t;
 
 #define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h
index 5a5347f..9c72e36 100644
--- a/arch/ia64/include/asm/unistd.h
+++ b/arch/ia64/include/asm/unistd.h
@@ -311,11 +311,12 @@
 #define __NR_preadv			1319
 #define __NR_pwritev			1320
 #define __NR_rt_tgsigqueueinfo		1321
+#define __NR_rt_recvmmsg		1322
 
 #ifdef __KERNEL__
 
 
-#define NR_syscalls			298 /* length of syscall table */
+#define NR_syscalls			299 /* length of syscall table */
 
 /*
  * The following defines stop scripts/checksyscalls.sh from complaining about
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index d0e7d37..d75b872 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1806,6 +1806,7 @@
 	data8 sys_preadv
 	data8 sys_pwritev			// 1320
 	data8 sys_rt_tgsigqueueinfo
+	data8 sys_recvmmsg
 
 	.org sys_call_table + 8*NR_syscalls	// guard against failures to increase NR_syscalls
 #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */
diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S
index 1a6e445..696eff2 100644
--- a/arch/ia64/kernel/head.S
+++ b/arch/ia64/kernel/head.S
@@ -1130,95 +1130,6 @@
 #endif /* CONFIG_IA64_BRL_EMU */
 
 #ifdef CONFIG_SMP
-	/*
-	 * This routine handles spinlock contention.  It uses a non-standard calling
-	 * convention to avoid converting leaf routines into interior routines.  Because
-	 * of this special convention, there are several restrictions:
-	 *
-	 * - do not use gp relative variables, this code is called from the kernel
-	 *   and from modules, r1 is undefined.
-	 * - do not use stacked registers, the caller owns them.
-	 * - do not use the scratch stack space, the caller owns it.
-	 * - do not use any registers other than the ones listed below
-	 *
-	 * Inputs:
-	 *   ar.pfs - saved CFM of caller
-	 *   ar.ccv - 0 (and available for use)
-	 *   r27    - flags from spin_lock_irqsave or 0.  Must be preserved.
-	 *   r28    - available for use.
-	 *   r29    - available for use.
-	 *   r30    - available for use.
-	 *   r31    - address of lock, available for use.
-	 *   b6     - return address
-	 *   p14    - available for use.
-	 *   p15    - used to track flag status.
-	 *
-	 * If you patch this code to use more registers, do not forget to update
-	 * the clobber lists for spin_lock() in arch/ia64/include/asm/spinlock.h.
-	 */
-
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-
-GLOBAL_ENTRY(ia64_spinlock_contention_pre3_4)
-	.prologue
-	.save ar.pfs, r0	// this code effectively has a zero frame size
-	.save rp, r28
-	.body
-	nop 0
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	.restore sp		// pop existing prologue after next insn
-	mov b6 = r28
-	.prologue
-	.save ar.pfs, r0
-	.altrp b6
-	.body
-	;;
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	nop 0
-	;;
-	cmp4.ne p14,p0=r30,r0
-(p14)	br.cond.sptk.few .wait
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	br.cond.sptk.few b6	// lock is now free, try to acquire
-	.global ia64_spinlock_contention_pre3_4_end	// for kernprof
-ia64_spinlock_contention_pre3_4_end:
-END(ia64_spinlock_contention_pre3_4)
-
-#else
-
-GLOBAL_ENTRY(ia64_spinlock_contention)
-	.prologue
-	.altrp b6
-	.body
-	tbit.nz p15,p0=r27,IA64_PSR_I_BIT
-	;;
-.wait:
-(p15)	ssm psr.i		// reenable interrupts if they were on
-				// DavidM says that srlz.d is slow and is not required in this case
-.wait2:
-	// exponential backoff, kdb, lockmeter etc. go in here
-	hint @pause
-	ld4 r30=[r31]		// don't use ld4.bias; if it's contended, we won't write the word
-	;;
-	cmp4.ne p14,p0=r30,r0
-	mov r30 = 1
-(p14)	br.cond.sptk.few .wait2
-(p15)	rsm psr.i		// disable interrupts if we reenabled them
-	;;
-	cmpxchg4.acq r30=[r31], r30, ar.ccv
-	;;
-	cmp4.ne p14,p0=r0,r30
-(p14)	br.cond.sptk.few .wait
-
-	br.ret.sptk.many b6	// lock is now taken
-END(ia64_spinlock_contention)
-
-#endif
 
 #ifdef CONFIG_HOTPLUG_CPU
 GLOBAL_ENTRY(ia64_jump_to_sal)
diff --git a/arch/ia64/kernel/ia64_ksyms.c b/arch/ia64/kernel/ia64_ksyms.c
index 8ebccb5..14d39e3 100644
--- a/arch/ia64/kernel/ia64_ksyms.c
+++ b/arch/ia64/kernel/ia64_ksyms.c
@@ -84,26 +84,6 @@
 #include <asm/unwind.h>
 EXPORT_SYMBOL(unw_init_running);
 
-#ifdef ASM_SUPPORTED
-# ifdef CONFIG_SMP
-#  if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention_pre3_4;
-EXPORT_SYMBOL(ia64_spinlock_contention_pre3_4);
-#  else
-/*
- * This is not a normal routine and we don't want a function descriptor for it, so we use
- * a fake declaration here.
- */
-extern char ia64_spinlock_contention;
-EXPORT_SYMBOL(ia64_spinlock_contention);
-#  endif
-# endif
-#endif
-
 #if defined(CONFIG_IA64_ESI) || defined(CONFIG_IA64_ESI_MODULE)
 extern void esi_call_phys (void);
 EXPORT_SYMBOL_GPL(esi_call_phys);
diff --git a/arch/ia64/oprofile/backtrace.c b/arch/ia64/oprofile/backtrace.c
index adb0156..5cdd7e4 100644
--- a/arch/ia64/oprofile/backtrace.c
+++ b/arch/ia64/oprofile/backtrace.c
@@ -32,24 +32,6 @@
 	u64 *prev_pfs_loc;	/* state for WAR for old spinlock ool code */
 } ia64_backtrace_t;
 
-#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-/*
- * Returns non-zero if the PC is in the spinlock contention out-of-line code
- * with non-standard calling sequence (on older compilers).
- */
-static __inline__ int in_old_ool_spinlock_code(unsigned long pc)
-{
-	extern const char ia64_spinlock_contention_pre3_4[] __attribute__ ((weak));
-	extern const char ia64_spinlock_contention_pre3_4_end[] __attribute__ ((weak));
-	unsigned long sc_start = (unsigned long)ia64_spinlock_contention_pre3_4;
-	unsigned long sc_end = (unsigned long)ia64_spinlock_contention_pre3_4_end;
-	return (sc_start && sc_end && pc >= sc_start && pc < sc_end);
-}
-#else
-/* Newer spinlock code does a proper br.call and works fine with the unwinder */
-#define in_old_ool_spinlock_code(pc)	0
-#endif
-
 /* Returns non-zero if the PC is in the Interrupt Vector Table */
 static __inline__ int in_ivt_code(unsigned long pc)
 {
@@ -80,7 +62,7 @@
 	 */
 	if (bt->prev_pfs_loc && bt->regs && bt->frame.pfs_loc == bt->prev_pfs_loc)
 		bt->frame.pfs_loc = &bt->regs->ar_pfs;
-	bt->prev_pfs_loc = (in_old_ool_spinlock_code(bt->frame.ip) ? bt->frame.pfs_loc : NULL);
+	bt->prev_pfs_loc = NULL;
 
 	return unw_unwind(&bt->frame) == 0;
 }
diff --git a/arch/m32r/include/asm/io.h b/arch/m32r/include/asm/io.h
index d06933b..4010f1f 100644
--- a/arch/m32r/include/asm/io.h
+++ b/arch/m32r/include/asm/io.h
@@ -162,6 +162,13 @@
 #define __raw_writew writew
 #define __raw_writel writel
 
+#define ioread8 read
+#define ioread16 readw
+#define ioread32 readl
+#define iowrite8 writeb
+#define iowrite16 writew
+#define iowrite32 writel
+
 #define mmiowb()
 
 #define flush_write_buffers() do { } while (0)  /* M32R_FIXME */
diff --git a/arch/m32r/include/asm/page.h b/arch/m32r/include/asm/page.h
index 11777f7..725ede8 100644
--- a/arch/m32r/include/asm/page.h
+++ b/arch/m32r/include/asm/page.h
@@ -1,9 +1,11 @@
 #ifndef _ASM_M32R_PAGE_H
 #define _ASM_M32R_PAGE_H
 
+#include <linux/const.h>
+
 /* PAGE_SHIFT determines the page size */
 #define PAGE_SHIFT	12
-#define PAGE_SIZE	(1UL << PAGE_SHIFT)
+#define PAGE_SIZE	(_AC(1, UL) << PAGE_SHIFT)
 #define PAGE_MASK	(~(PAGE_SIZE-1))
 
 #ifndef __ASSEMBLY__
diff --git a/arch/m32r/include/asm/processor.h b/arch/m32r/include/asm/processor.h
index 1a997fc..8397c24 100644
--- a/arch/m32r/include/asm/processor.h
+++ b/arch/m32r/include/asm/processor.h
@@ -140,8 +140,6 @@
 #define KSTK_EIP(tsk)  ((tsk)->thread.lr)
 #define KSTK_ESP(tsk)  ((tsk)->thread.sp)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 #define cpu_relax()	barrier()
 
 #endif /* _ASM_M32R_PROCESSOR_H */
diff --git a/arch/m32r/include/asm/socket.h b/arch/m32r/include/asm/socket.h
index 3390a86..469787c3 100644
--- a/arch/m32r/include/asm/socket.h
+++ b/arch/m32r/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_M32R_SOCKET_H */
diff --git a/arch/m32r/include/asm/thread_info.h b/arch/m32r/include/asm/thread_info.h
index 7157815..ed240b6 100644
--- a/arch/m32r/include/asm/thread_info.h
+++ b/arch/m32r/include/asm/thread_info.h
@@ -55,6 +55,8 @@
 
 #define PREEMPT_ACTIVE		0x10000000
 
+#define THREAD_SIZE (PAGE_SIZE << 1)
+
 /*
  * macros/functions for gaining access to the thread information structure
  */
@@ -76,8 +78,6 @@
 #define init_thread_info	(init_thread_union.thread_info)
 #define init_stack		(init_thread_union.stack)
 
-#define THREAD_SIZE (2*PAGE_SIZE)
-
 /* how to get the thread information struct from C */
 static inline struct thread_info *current_thread_info(void)
 {
@@ -125,17 +125,6 @@
 	return ti->flags >> TI_FLAG_FAULT_CODE_SHIFT;
 }
 
-#else /* !__ASSEMBLY__ */
-
-#define THREAD_SIZE	8192
-
-/* how to get the thread information struct from ASM */
-#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
-	.macro GET_THREAD_INFO reg
-	ldi	\reg, #-THREAD_SIZE
-	and	\reg, sp
-	.endm
-
 #endif
 
 /*
diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S
index 612d35b..4038698 100644
--- a/arch/m32r/kernel/entry.S
+++ b/arch/m32r/kernel/entry.S
@@ -118,6 +118,13 @@
 #define resume_kernel		restore_all
 #endif
 
+/* how to get the thread information struct from ASM */
+#define GET_THREAD_INFO(reg)	GET_THREAD_INFO reg
+	.macro GET_THREAD_INFO reg
+	ldi	\reg, #-THREAD_SIZE
+	and	\reg, sp
+	.endm
+
 ENTRY(ret_from_fork)
 	pop	r0
 	bl	schedule_tail
diff --git a/arch/m32r/kernel/head.S b/arch/m32r/kernel/head.S
index 0a71944..a46652d 100644
--- a/arch/m32r/kernel/head.S
+++ b/arch/m32r/kernel/head.S
@@ -268,13 +268,13 @@
 /*------------------------------------------------------------------------
  * Stack area
  */
-	.section .spi
+	.section .init.data, "aw"
 	ALIGN
 	.global spi_stack_top
 	.zero	1024
 spi_stack_top:
 
-	.section .spu
+	.section .init.data, "aw"
 	ALIGN
 	.global spu_stack_top
 	.zero	1024
diff --git a/arch/m32r/kernel/m32r_ksyms.c b/arch/m32r/kernel/m32r_ksyms.c
index 22624b5..7005707 100644
--- a/arch/m32r/kernel/m32r_ksyms.c
+++ b/arch/m32r/kernel/m32r_ksyms.c
@@ -23,12 +23,6 @@
 EXPORT_SYMBOL(iounmap);
 EXPORT_SYMBOL(kernel_thread);
 
-/* Networking helper routines. */
-/* Delay loops */
-EXPORT_SYMBOL(__udelay);
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-
 EXPORT_SYMBOL(strncpy_from_user);
 EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(clear_user);
diff --git a/arch/m32r/kernel/time.c b/arch/m32r/kernel/time.c
index ba61c4c..e7fee0f1 100644
--- a/arch/m32r/kernel/time.c
+++ b/arch/m32r/kernel/time.c
@@ -33,6 +33,15 @@
 
 #include <asm/hw_irq.h>
 
+#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
+/* this needs a better home */
+DEFINE_SPINLOCK(rtc_lock);
+
+#ifdef CONFIG_RTC_DRV_CMOS_MODULE
+EXPORT_SYMBOL(rtc_lock);
+#endif
+#endif  /* pc-style 'CMOS' RTC support */
+
 #ifdef CONFIG_SMP
 extern void smp_local_timer_interrupt(void);
 #endif
diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c
index 03b14e5..fbd1090 100644
--- a/arch/m32r/kernel/traps.c
+++ b/arch/m32r/kernel/traps.c
@@ -104,8 +104,8 @@
 	eit_vector[186] = (unsigned long)smp_call_function_interrupt;
 	eit_vector[187] = (unsigned long)smp_ipi_timer_interrupt;
 	eit_vector[188] = (unsigned long)smp_flush_cache_all_interrupt;
-	eit_vector[189] = (unsigned long)smp_call_function_single_interrupt;
-	eit_vector[190] = 0;
+	eit_vector[189] = 0;	/* CPU_BOOT_IPI */
+	eit_vector[190] = (unsigned long)smp_call_function_single_interrupt;
 	eit_vector[191] = 0;
 #endif
 	_flush_cache_copyback_all();
diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S
index de5e21c..8ceb618 100644
--- a/arch/m32r/kernel/vmlinux.lds.S
+++ b/arch/m32r/kernel/vmlinux.lds.S
@@ -4,6 +4,7 @@
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/addrspace.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 
 OUTPUT_ARCH(m32r)
 #if defined(__LITTLE_ENDIAN__)
@@ -40,83 +41,22 @@
 #endif
   _etext = .;			/* End of text section */
 
-  . = ALIGN(16);		/* Exception table */
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
+  EXCEPTION_TABLE(16)
   RODATA
-
-  /* writeable */
-  .data : {			/* Data */
-	*(.spu)
-	*(.spi)
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  . = ALIGN(4096);
-  __nosave_begin = .;
-  .data_nosave : { *(.data.nosave) }
-  . = ALIGN(4096);
-  __nosave_end = .;
-
-  . = ALIGN(32);
-  .data.cacheline_aligned : { *(.data.cacheline_aligned) }
-
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
   _edata = .;			/* End of data section */
 
-  . = ALIGN(8192);		/* init_task */
-  .data.init_task : { *(.data.init_task) }
-
   /* will be freed after init */
-  . = ALIGN(4096);		/* Init code and data */
+  . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA }
-  . = ALIGN(16);
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-  SECURITY_INIT
-  . = ALIGN(4);
-  __alt_instructions = .;
-  .altinstructions : { *(.altinstructions) }
-  __alt_instructions_end = .;
-  .altinstr_replacement : { *(.altinstr_replacement) }
-  /* .exit.text is discard at runtime, not link time, to deal with references
-     from .altinstructions and .eh_frame */
-  .exit.text : { EXIT_TEXT }
-  .exit.data : { EXIT_DATA }
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start = .;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-  . = ALIGN(4096);
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
+  PERCPU(PAGE_SIZE)
+  . = ALIGN(PAGE_SIZE);
   __init_end = .;
   /* freed after init ends here */
 
-  __bss_start = .;		/* BSS */
-  .bss : { *(.bss) }
-  . = ALIGN(4);
-  __bss_stop = .;
+  BSS_SECTION(0, 0, 4)
 
   _end = . ;
 
diff --git a/arch/m32r/lib/delay.c b/arch/m32r/lib/delay.c
index ced549b..940f483 100644
--- a/arch/m32r/lib/delay.c
+++ b/arch/m32r/lib/delay.c
@@ -122,4 +122,8 @@
 {
 	__const_udelay(nsecs * 0x00005);  /* 2**32 / 1000000000 (rounded up) */
 }
+
+EXPORT_SYMBOL(__delay);
+EXPORT_SYMBOL(__const_udelay);
+EXPORT_SYMBOL(__udelay);
 EXPORT_SYMBOL(__ndelay);
diff --git a/arch/m32r/mm/discontig.c b/arch/m32r/mm/discontig.c
index b7a78ad..5d2858f 100644
--- a/arch/m32r/mm/discontig.c
+++ b/arch/m32r/mm/discontig.c
@@ -32,6 +32,9 @@
 } mem_prof_t;
 static mem_prof_t mem_prof[MAX_NUMNODES];
 
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+
 static void __init mem_prof_init(void)
 {
 	unsigned long start_pfn, holes, free_pfn;
@@ -42,7 +45,7 @@
 	/* Node#0 SDRAM */
 	mp = &mem_prof[0];
 	mp->start_pfn = PFN_UP(CONFIG_MEMORY_START);
-	mp->pages = PFN_DOWN(CONFIG_MEMORY_SIZE);
+	mp->pages = PFN_DOWN(memory_end - memory_start);
 	mp->holes = 0;
 	mp->free_pfn = PFN_UP(__pa(_end));
 
diff --git a/arch/m32r/mm/mmu.S b/arch/m32r/mm/mmu.S
index 49a6d16..e9491a5 100644
--- a/arch/m32r/mm/mmu.S
+++ b/arch/m32r/mm/mmu.S
@@ -150,9 +150,13 @@
 
 	; pmd = pmd_offset(pgd, address);
 	ld	r3, @r3			; r3: pmd data
-	ldi	r2, #-4096
 	beqz	r3, 3f			; pmd_none(*pmd) ?
 
+	and3	r2, r3, #0xfff
+	add3	r2, r2, #-355		; _KERNPG_TABLE(=0x163)
+	bnez	r2, 3f			; pmd_bad(*pmd) ?
+	ldi	r2, #-4096
+
 	; pte = pte_offset(pmd, address);
 	and	r2, r3			; r2: pte base addr
 	srl3	r3, r0, #10
@@ -263,9 +267,9 @@
 	ld	r1, @r3			; r1: pmd
 	beqz	r1, 3f			; pmd_none(*pmd) ?
 ;
-	and3	r1, r1, #0xeff
-	ldi	r4, #611		; _KERNPG_TABLE(=611)
-	bne	r1, r4, 3f		; !pmd_bad(*pmd) ?
+	and3	r1, r1, #0x3ff
+	ldi	r4, #0x163		; _KERNPG_TABLE(=0x163)
+	bne	r1, r4, 3f		; pmd_bad(*pmd) ?
 
 	.fillinsn
 4:
diff --git a/arch/m68k/include/asm/hardirq_mm.h b/arch/m68k/include/asm/hardirq_mm.h
index 554f65b..394ee94 100644
--- a/arch/m68k/include/asm/hardirq_mm.h
+++ b/arch/m68k/include/asm/hardirq_mm.h
@@ -1,8 +1,16 @@
 #ifndef __M68K_HARDIRQ_H
 #define __M68K_HARDIRQ_H
 
-#define HARDIRQ_BITS	8
+#include <linux/threads.h>
+#include <linux/cache.h>
 
-#include <asm-generic/hardirq.h>
+/* entry.S is sensitive to the offsets of these fields */
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
 
 #endif
diff --git a/arch/m68k/include/asm/socket.h b/arch/m68k/include/asm/socket.h
index eee01cc..9bf49c8 100644
--- a/arch/m68k/include/asm/socket.h
+++ b/arch/m68k/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index ecec191..c1ab1dc 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -371,3 +371,4 @@
 	.long sys_ni_syscall
 	.long sys_rt_tgsigqueueinfo	/* 365 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c
index 3ab6d80..19c1c82 100644
--- a/arch/mips/alchemy/common/dbdma.c
+++ b/arch/mips/alchemy/common/dbdma.c
@@ -175,7 +175,7 @@
 #define DBDEV_TAB_SIZE	ARRAY_SIZE(dbdev_tab)
 
 #ifdef CONFIG_PM
-static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
+static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
 #endif
 
 
@@ -993,14 +993,13 @@
 	au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
 
 	/* save channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
 		au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
 		au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
 		au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
 		au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
 		au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
-		au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
 
 		/* halt channel */
 		au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
@@ -1027,14 +1026,13 @@
 	au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
 
 	/* restore channel configurations */
-	for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
+	for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
 		au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
 		au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
 		au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
 		au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
 		au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
 		au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
-		au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
 		au_sync();
 		addr += 0x100;	/* next channel base */
 	}
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
index dfbfd7e..938b1d0 100644
--- a/arch/mips/basler/excite/excite_iodev.c
+++ b/arch/mips/basler/excite/excite_iodev.c
@@ -112,10 +112,8 @@
 {
 	int ret;
 
-	lock_kernel();
 	ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
 			   iodev_name, &miscdev);
-	unlock_kernel();
 
 	return ret;
 }
diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile
index aaa585c..c146d1e 100644
--- a/arch/mips/bcm63xx/Makefile
+++ b/arch/mips/bcm63xx/Makefile
@@ -1,5 +1,5 @@
 obj-y		+= clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-		   dev-dsp.o dev-enet.o
+		   dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 obj-y		+= boards/
diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c
index fd77f54..78e155d 100644
--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -20,10 +20,11 @@
 #include <bcm63xx_cpu.h>
 #include <bcm63xx_regs.h>
 #include <bcm63xx_io.h>
-#include <bcm63xx_board.h>
 #include <bcm63xx_dev_pci.h>
 #include <bcm63xx_dev_enet.h>
 #include <bcm63xx_dev_dsp.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_dev_uart.h>
 #include <board_bcm963xx.h>
 
 #define PFX	"board_bcm963xx: "
@@ -793,6 +794,11 @@
 {
 	u32 val;
 
+	bcm63xx_uart_register();
+
+	if (board.has_pccard)
+		bcm63xx_pcmcia_register();
+
 	if (board.has_enet0 &&
 	    !board_get_mac_address(board.enet0.mac_addr))
 		bcm63xx_enet_register(0, &board.enet0);
diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c
new file mode 100644
index 0000000..de4d917
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-pcmcia.c
@@ -0,0 +1,144 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <asm/bootinfo.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cs.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_pcmcia.h>
+#include <bcm63xx_io.h>
+#include <bcm63xx_regs.h>
+
+static struct resource pcmcia_resources[] = {
+	/* pcmcia registers */
+	{
+		/* start & end filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* pcmcia memory zone resources */
+	{
+		.start		= BCM_PCMCIA_COMMON_BASE_PA,
+		.end		= BCM_PCMCIA_COMMON_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_ATTR_BASE_PA,
+		.end		= BCM_PCMCIA_ATTR_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_MEM,
+	},
+
+	/* PCMCIA irq */
+	{
+		/* start filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+
+	/* declare PCMCIA IO resource also */
+	{
+		.start		= BCM_PCMCIA_IO_BASE_PA,
+		.end		= BCM_PCMCIA_IO_END_PA,
+		.flags		= IORESOURCE_IO,
+	},
+};
+
+static struct bcm63xx_pcmcia_platform_data pd;
+
+static struct platform_device bcm63xx_pcmcia_device = {
+	.name		= "bcm63xx_pcmcia",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(pcmcia_resources),
+	.resource	= pcmcia_resources,
+	.dev		= {
+		.platform_data = &pd,
+	},
+};
+
+static int __init config_pcmcia_cs(unsigned int cs,
+				   u32 base, unsigned int size)
+{
+	int ret;
+
+	ret = bcm63xx_set_cs_status(cs, 0);
+	if (!ret)
+		ret = bcm63xx_set_cs_base(cs, base, size);
+	if (!ret)
+		ret = bcm63xx_set_cs_status(cs, 1);
+	return ret;
+}
+
+static const __initdata struct {
+	unsigned int	cs;
+	unsigned int	base;
+	unsigned int	size;
+} pcmcia_cs[3] = {
+	{
+		.cs	= MPI_CS_PCMCIA_COMMON,
+		.base	= BCM_PCMCIA_COMMON_BASE_PA,
+		.size	= BCM_PCMCIA_COMMON_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_ATTR,
+		.base	= BCM_PCMCIA_ATTR_BASE_PA,
+		.size	= BCM_PCMCIA_ATTR_SIZE
+	},
+	{
+		.cs	= MPI_CS_PCMCIA_IO,
+		.base	= BCM_PCMCIA_IO_BASE_PA,
+		.size	= BCM_PCMCIA_IO_SIZE
+	},
+};
+
+int __init bcm63xx_pcmcia_register(void)
+{
+	int ret, i;
+
+	if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
+		return 0;
+
+	/* use correct pcmcia ready gpio depending on processor */
+	switch (bcm63xx_get_cpu_id()) {
+	case BCM6348_CPU_ID:
+		pd.ready_gpio = 22;
+		break;
+
+	case BCM6358_CPU_ID:
+		pd.ready_gpio = 18;
+		break;
+
+	default:
+		return -ENODEV;
+	}
+
+	pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
+	pcmcia_resources[0].end = pcmcia_resources[0].start +
+		RSET_PCMCIA_SIZE - 1;
+	pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
+
+	/* configure pcmcia chip selects */
+	for (i = 0; i < 3; i++) {
+		ret = config_pcmcia_cs(pcmcia_cs[i].cs,
+				       pcmcia_cs[i].base,
+				       pcmcia_cs[i].size);
+		if (ret)
+			goto out_err;
+	}
+
+	return platform_device_register(&bcm63xx_pcmcia_device);
+
+out_err:
+	printk(KERN_ERR "unable to set pcmcia chip select\n");
+	return ret;
+}
diff --git a/arch/mips/bcm63xx/dev-uart.c b/arch/mips/bcm63xx/dev-uart.c
new file mode 100644
index 0000000..5f3d89c
--- /dev/null
+++ b/arch/mips/bcm63xx/dev-uart.c
@@ -0,0 +1,41 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <bcm63xx_cpu.h>
+#include <bcm63xx_dev_uart.h>
+
+static struct resource uart_resources[] = {
+	{
+		.start		= -1, /* filled at runtime */
+		.end		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= -1, /* filled at runtime */
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device bcm63xx_uart_device = {
+	.name		= "bcm63xx_uart",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(uart_resources),
+	.resource	= uart_resources,
+};
+
+int __init bcm63xx_uart_register(void)
+{
+	uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
+	uart_resources[0].end = uart_resources[0].start;
+	uart_resources[0].end += RSET_UART_SIZE - 1;
+	uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
+	return platform_device_register(&bcm63xx_uart_device);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
new file mode 100644
index 0000000..2beb3969
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pcmcia.h
@@ -0,0 +1,13 @@
+#ifndef BCM63XX_DEV_PCMCIA_H_
+#define BCM63XX_DEV_PCMCIA_H_
+
+/*
+ * PCMCIA driver platform data
+ */
+struct bcm63xx_pcmcia_platform_data {
+	unsigned int ready_gpio;
+};
+
+int bcm63xx_pcmcia_register(void);
+
+#endif /* BCM63XX_DEV_PCMCIA_H_ */
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
new file mode 100644
index 0000000..bf348f5
--- /dev/null
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_uart.h
@@ -0,0 +1,6 @@
+#ifndef BCM63XX_DEV_UART_H_
+#define BCM63XX_DEV_UART_H_
+
+int bcm63xx_uart_register(void);
+
+#endif /* BCM63XX_DEV_UART_H_ */
diff --git a/arch/mips/include/asm/smp.h b/arch/mips/include/asm/smp.h
index e15f11a..af42385 100644
--- a/arch/mips/include/asm/smp.h
+++ b/arch/mips/include/asm/smp.h
@@ -77,7 +77,18 @@
 
 extern asmlinkage void smp_call_function_interrupt(void);
 
-extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+static inline void arch_send_call_function_single_ipi(int cpu)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
+}
+
+static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
+{
+	extern struct plat_smp_ops *mp_ops;     /* private */
+
+	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
+}
 
 #endif /* __ASM_SMP_H */
diff --git a/arch/mips/include/asm/socket.h b/arch/mips/include/asm/socket.h
index ae05acc..9de5190 100644
--- a/arch/mips/include/asm/socket.h
+++ b/arch/mips/include/asm/socket.h
@@ -80,6 +80,8 @@
 #define SO_TIMESTAMPING		37
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             40
+
 #ifdef __KERNEL__
 
 /** sock_type - Socket types
diff --git a/arch/mips/include/asm/unaligned.h b/arch/mips/include/asm/unaligned.h
index 7924049..42f66c3 100644
--- a/arch/mips/include/asm/unaligned.h
+++ b/arch/mips/include/asm/unaligned.h
@@ -12,17 +12,17 @@
 #if defined(__MIPSEB__)
 # include <linux/unaligned/be_struct.h>
 # include <linux/unaligned/le_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_be
 # define put_unaligned	__put_unaligned_be
 #elif defined(__MIPSEL__)
 # include <linux/unaligned/le_struct.h>
 # include <linux/unaligned/be_byteshift.h>
-# include <linux/unaligned/generic.h>
 # define get_unaligned	__get_unaligned_le
 # define put_unaligned	__put_unaligned_le
 #else
 #  error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
 #endif
 
+# include <linux/unaligned/generic.h>
+
 #endif /* _ASM_MIPS_UNALIGNED_H */
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index e961221..eecd2a9 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -2,6 +2,8 @@
 # Makefile for the Linux/MIPS kernel.
 #
 
+CPPFLAGS_vmlinux.lds := $(KBUILD_CFLAGS)
+
 extra-y		:= head.o init_task.o vmlinux.lds
 
 obj-y		+= cpu-probe.o branch.o entry.o genex.o irq.o process.o \
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index f2397f0..ad4e017 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -172,13 +172,20 @@
 }
 
 
-static void sp_setfsuidgid( uid_t uid, gid_t gid)
+static int sp_setfsuidgid(uid_t uid, gid_t gid)
 {
-	current->cred->fsuid = uid;
-	current->cred->fsgid = gid;
+	struct cred *new;
 
-	key_fsuid_changed(current);
-	key_fsgid_changed(current);
+	new = prepare_creds();
+	if (!new)
+		return -ENOMEM;
+
+	new->fsuid = uid;
+	new->fsgid = gid;
+
+	commit_creds(new);
+
+	return 0;
 }
 
 /*
@@ -196,7 +203,7 @@
 	mm_segment_t old_fs;
 	struct timeval tv;
 	struct timezone tz;
-	int cmd;
+	int err, cmd;
 
 	char *vcwd;
 	int size;
@@ -225,8 +232,11 @@
 	/* Run the syscall at the privilege of the user who loaded the
 	   SP program */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
+		if (!err)
+			pr_err("Change of creds failed\n");
+	}
 
 	switch (sc.cmd) {
 	/* needs the flags argument translating from SDE kit to
@@ -283,8 +293,11 @@
 		break;
  	} /* switch */
 
-	if (vpe_getuid(tclimit))
-		sp_setfsuidgid( 0, 0);
+	if (vpe_getuid(tclimit)) {
+		err = sp_setfsuidgid(0, 0);
+		if (!err)
+			pr_err("restoring old creds failed\n");
+	}
 
 	old_fs = get_fs();
 	set_fs(KERNEL_DS);
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index a10ebfd..364f066 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,8 +72,9 @@
 */
 static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
 {
+	unsigned int vpeflags;
+	unsigned long flags;
 	int i;
-	unsigned int flags, vpeflags;
 
 	/* Ought not to be strictly necessary for SMTC builds */
 	local_irq_save(flags);
@@ -392,20 +393,12 @@
 
 static int file_open(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-	int err;
-
-	lock_kernel();
-	err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
-	unlock_kernel();
-	return err;
+	return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
 }
 
 static int file_release(struct inode *inode, struct file *filp)
 {
-	int minor = iminor(inode);
-
-	return rtlx_release(minor);
+	return rtlx_release(iminor(inode));
 }
 
 static unsigned int file_poll(struct file *file, poll_table * wait)
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index fd2a9bb..17202bb 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -583,6 +583,7 @@
 	sys	sys_rt_tgsigqueueinfo	4
 	sys	sys_perf_event_open	5
 	sys	sys_accept4		4
+	sys     sys_recvmmsg            5
 	.endm
 
 	/* We pre-compute the number of _instruction_ bytes needed to
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 18bf7f3..a8a6c59 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -420,4 +420,5 @@
 	PTR	sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index 6ebc079..5154e64 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -418,4 +418,5 @@
 	PTR	compat_sys_rt_tgsigqueueinfo	/* 5295 */
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9bbf977..d0eff53 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -538,4 +538,5 @@
 	PTR	compat_sys_rt_tgsigqueueinfo
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
+	PTR     compat_sys_recvmmsg
 	.size	sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 4eb106c..e72e684 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -32,7 +32,6 @@
 #include <linux/cpumask.h>
 #include <linux/cpu.h>
 #include <linux/err.h>
-#include <linux/smp.h>
 
 #include <asm/atomic.h>
 #include <asm/cpu.h>
@@ -128,19 +127,6 @@
 	cpu_idle();
 }
 
-void arch_send_call_function_ipi_mask(const struct cpumask *mask)
-{
-	mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
-}
-
-/*
- * We reuse the same vector for the single IPI
- */
-void arch_send_call_function_single_ipi(int cpu)
-{
-	mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
-}
-
 /*
  * Call into both interrupt handlers, as we share the IPI for them
  */
diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c
index 67153a0..4d181df4 100644
--- a/arch/mips/kernel/smtc.c
+++ b/arch/mips/kernel/smtc.c
@@ -1098,9 +1098,8 @@
 
 static struct irqaction irq_ipi = {
 	.handler	= ipi_interrupt,
-	.flags		= IRQF_DISABLED,
-	.name		= "SMTC_IPI",
-	.flags		= IRQF_PERCPU
+	.flags		= IRQF_DISABLED | IRQF_PERCPU,
+	.name		= "SMTC_IPI"
 };
 
 static void setup_cross_vpe_interrupts(unsigned int nvpe)
diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S
index 9bf0e3d..162b299 100644
--- a/arch/mips/kernel/vmlinux.lds.S
+++ b/arch/mips/kernel/vmlinux.lds.S
@@ -11,15 +11,15 @@
 	note PT_NOTE FLAGS(4);	/* R__ */
 }
 
-ifdef CONFIG_32BIT
-	ifdef CONFIG_CPU_LITTLE_ENDIAN
+#ifdef CONFIG_32BIT
+	#ifdef CONFIG_CPU_LITTLE_ENDIAN
 		jiffies  = jiffies_64;
-	else
+	#else
 		jiffies  = jiffies_64 + 4;
-	endif
-else
+	#endif
+#else
 	jiffies  = jiffies_64;
-endif
+#endif
 
 SECTIONS
 {
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index eb6c4c5..03092ab 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -144,14 +144,15 @@
 };
 
 struct {
-	/* Virtual processing elements */
-	struct list_head vpe_list;
-
-	/* Thread contexts */
-	struct list_head tc_list;
+	spinlock_t vpe_list_lock;
+	struct list_head vpe_list;	/* Virtual processing elements */
+	spinlock_t tc_list_lock;
+	struct list_head tc_list;	/* Thread contexts */
 } vpecontrol = {
-	.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
-	.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
+	.vpe_list_lock	= SPIN_LOCK_UNLOCKED,
+	.vpe_list	= LIST_HEAD_INIT(vpecontrol.vpe_list),
+	.tc_list_lock	= SPIN_LOCK_UNLOCKED,
+	.tc_list	= LIST_HEAD_INIT(vpecontrol.tc_list)
 };
 
 static void release_progmem(void *ptr);
@@ -159,28 +160,38 @@
 /* get the vpe associated with this minor */
 static struct vpe *get_vpe(int minor)
 {
-	struct vpe *v;
+	struct vpe *res, *v;
 
 	if (!cpu_has_mipsmt)
 		return NULL;
 
+	res = NULL;
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_for_each_entry(v, &vpecontrol.vpe_list, list) {
-		if (v->minor == minor)
-			return v;
+		if (v->minor == minor) {
+			res = v;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
-	return NULL;
+	return res;
 }
 
 /* get the vpe associated with this minor */
 static struct tc *get_tc(int index)
 {
-	struct tc *t;
+	struct tc *res, *t;
 
+	res = NULL;
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_for_each_entry(t, &vpecontrol.tc_list, list) {
-		if (t->index == index)
-			return t;
+		if (t->index == index) {
+			res = t;
+			break;
+		}
 	}
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 	return NULL;
 }
@@ -190,15 +201,17 @@
 {
 	struct vpe *v;
 
-	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
+	if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
 		return NULL;
-	}
 
 	INIT_LIST_HEAD(&v->tc);
+	spin_lock(&vpecontrol.vpe_list_lock);
 	list_add_tail(&v->list, &vpecontrol.vpe_list);
+	spin_unlock(&vpecontrol.vpe_list_lock);
 
 	INIT_LIST_HEAD(&v->notify);
 	v->minor = minor;
+
 	return v;
 }
 
@@ -212,7 +225,10 @@
 
 	INIT_LIST_HEAD(&tc->tc);
 	tc->index = index;
+
+	spin_lock(&vpecontrol.tc_list_lock);
 	list_add_tail(&tc->list, &vpecontrol.tc_list);
+	spin_unlock(&vpecontrol.tc_list_lock);
 
 out:
 	return tc;
@@ -227,7 +243,7 @@
 	kfree(v);
 }
 
-static void dump_mtregs(void)
+static void __maybe_unused dump_mtregs(void)
 {
 	unsigned long val;
 
@@ -1048,20 +1064,19 @@
 	enum vpe_state state;
 	struct vpe_notifications *not;
 	struct vpe *v;
-	int ret, err = 0;
+	int ret;
 
-	lock_kernel();
 	if (minor != iminor(inode)) {
 		/* assume only 1 device at the moment. */
-		printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: only vpe1 is supported\n");
+
+		return -ENODEV;
 	}
 
 	if ((v = get_vpe(tclimit)) == NULL) {
-		printk(KERN_WARNING "VPE loader: unable to get vpe\n");
-		err = -ENODEV;
-		goto out;
+		pr_warning("VPE loader: unable to get vpe\n");
+
+		return -ENODEV;
 	}
 
 	state = xchg(&v->state, VPE_STATE_INUSE);
@@ -1101,8 +1116,8 @@
 	v->shared_ptr = NULL;
 	v->__start = 0;
 
-out:
 	unlock_kernel();
+
 	return 0;
 }
 
@@ -1594,14 +1609,14 @@
 {
 	struct vpe *v, *n;
 
-	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
-		if (v->state != VPE_STATE_UNUSED) {
-			release_vpe(v);
-		}
-	}
-
 	device_del(&vpe_device);
 	unregister_chrdev(major, module_name);
+
+	/* No locking needed here */
+	list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
+		if (v->state != VPE_STATE_UNUSED)
+			release_vpe(v);
+	}
 }
 
 module_init(vpe_module_init);
diff --git a/arch/mips/mm/sc-mips.c b/arch/mips/mm/sc-mips.c
index b55c2d1..5ab5fa8 100644
--- a/arch/mips/mm/sc-mips.c
+++ b/arch/mips/mm/sc-mips.c
@@ -32,6 +32,11 @@
  */
 static void mips_sc_inv(unsigned long addr, unsigned long size)
 {
+	unsigned long lsize = cpu_scache_line_size();
+	unsigned long almask = ~(lsize - 1);
+
+	cache_op(Hit_Writeback_Inv_SD, addr & almask);
+	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
 	blast_inv_scache_range(addr, addr + size);
 }
 
diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c
index 655cb8d..deed1d5 100644
--- a/arch/mips/oprofile/op_model_loongson2.c
+++ b/arch/mips/oprofile/op_model_loongson2.c
@@ -44,7 +44,7 @@
 	unsigned int ctrl;
 	unsigned long long reset_counter1;
 	unsigned long long reset_counter2;
-	int cnt1_enalbed, cnt2_enalbed;
+	int cnt1_enabled, cnt2_enabled;
 } reg;
 
 DEFINE_SPINLOCK(sample_lock);
@@ -81,8 +81,8 @@
 
 	reg.ctrl = ctrl;
 
-	reg.cnt1_enalbed = cfg[0].enabled;
-	reg.cnt2_enalbed = cfg[1].enabled;
+	reg.cnt1_enabled = cfg[0].enabled;
+	reg.cnt2_enabled = cfg[1].enabled;
 
 }
 
@@ -99,7 +99,7 @@
 static void loongson2_cpu_start(void *args)
 {
 	/* Start all counters on current CPU */
-	if (reg.cnt1_enalbed || reg.cnt2_enalbed)
+	if (reg.cnt1_enabled || reg.cnt2_enabled)
 		write_c0_perfctrl(reg.ctrl);
 }
 
@@ -125,7 +125,7 @@
 	 */
 
 	/* Check whether the irq belongs to me */
-	enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
+	enabled = reg.cnt1_enabled | reg.cnt2_enabled;
 	if (!enabled)
 		return IRQ_NONE;
 
@@ -136,12 +136,12 @@
 	spin_lock_irqsave(&sample_lock, flags);
 
 	if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt1_enalbed)
+		if (reg.cnt1_enabled)
 			oprofile_add_sample(regs, 0);
 		counter1 = reg.reset_counter1;
 	}
 	if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
-		if (reg.cnt2_enalbed)
+		if (reg.cnt2_enabled)
 			oprofile_add_sample(regs, 1);
 		counter2 = reg.reset_counter2;
 	}
diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c
index 109c95c..32548b5 100644
--- a/arch/mips/pci/ops-pmcmsp.c
+++ b/arch/mips/pci/ops-pmcmsp.c
@@ -385,6 +385,7 @@
 	unsigned long intr;
 	unsigned long value;
 	static char pciirqflag;
+	int ret;
 #if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
 	unsigned int	vpe_status;
 #endif
@@ -402,11 +403,13 @@
 	 * allocation assigns an interrupt handler to the interrupt.
 	 */
 	if (pciirqflag == 0) {
-		request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
+		ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
 				bpci_interrupt,
 				IRQF_SHARED | IRQF_DISABLED,
 				"PMC MSP PCI Host",
 				preg);
+		if (ret != 0)
+			return ret;
 		pciirqflag = ~0;
 	}
 
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index 9aa8f29..c6851df 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -165,7 +165,7 @@
 	REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
 }
 
-static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
+static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 {
 	unsigned int i;
 
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index ba59839..4070268 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -117,10 +117,6 @@
 	unsigned long flags;
 	unsigned int irq_dirty;
 
-	if (cpumask_weight(mask) != 1) {
-		printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
-		return -1;
-	}
 	i = cpumask_first(mask);
 
 	/* Convert logical CPU to physical CPU */
diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c
index 637a194..15ea778 100644
--- a/arch/mips/sibyte/common/sb_tbprof.c
+++ b/arch/mips/sibyte/common/sb_tbprof.c
@@ -403,36 +403,31 @@
 static int sbprof_tb_open(struct inode *inode, struct file *filp)
 {
 	int minor;
-	int err = 0;
 
-	lock_kernel();
 	minor = iminor(inode);
-	if (minor != 0) {
-		err = -ENODEV;
-		goto out;
-	}
+	if (minor != 0)
+		return -ENODEV;
 
-	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
-		err = -EBUSY;
-		goto out;
-	}
+	if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
+		return -EBUSY;
 
 	memset(&sbp, 0, sizeof(struct sbprof_tb));
 	sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
 	if (!sbp.sbprof_tbbuf) {
-		err = -ENOMEM;
-		goto out;
+		sbp.open = SB_CLOSED;
+		wmb();
+		return -ENOMEM;
 	}
+
 	memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
 	init_waitqueue_head(&sbp.tb_sync);
 	init_waitqueue_head(&sbp.tb_read);
 	mutex_init(&sbp.lock);
 
 	sbp.open = SB_OPEN;
+	wmb();
 
-  out:
-	unlock_kernel();
-	return err;
+	return 0;
 }
 
 static int sbprof_tb_release(struct inode *inode, struct file *filp)
@@ -440,7 +435,7 @@
 	int minor;
 
 	minor = iminor(inode);
-	if (minor != 0 || !sbp.open)
+	if (minor != 0 || sbp.open != SB_CLOSED)
 		return -ENODEV;
 
 	mutex_lock(&sbp.lock);
@@ -449,7 +444,8 @@
 		sbprof_zbprof_stop();
 
 	vfree(sbp.sbprof_tbbuf);
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 
 	mutex_unlock(&sbp.lock);
 
@@ -583,7 +579,8 @@
 	}
 	tb_dev = dev;
 
-	sbp.open = 0;
+	sbp.open = SB_CLOSED;
+	wmb();
 	tb_period = zbbus_mhz * 10000LL;
 	pr_info(DEVNAME ": initialized - tb_period = %lld\n",
 		(long long) tb_period);
diff --git a/arch/mips/sibyte/swarm/setup.c b/arch/mips/sibyte/swarm/setup.c
index 623ffc9..5277aac 100644
--- a/arch/mips/sibyte/swarm/setup.c
+++ b/arch/mips/sibyte/swarm/setup.c
@@ -106,7 +106,7 @@
 		break;
 	}
 	ts->tv_sec = sec;
-	tv->tv_nsec = 0;
+	ts->tv_nsec = 0;
 }
 
 int rtc_mips_set_time(unsigned long sec)
diff --git a/arch/mn10300/include/asm/socket.h b/arch/mn10300/include/asm/socket.h
index 4df75af..4e60c42 100644
--- a/arch/mn10300/include/asm/socket.h
+++ b/arch/mn10300/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/mn10300/include/asm/uaccess.h b/arch/mn10300/include/asm/uaccess.h
index 8a3a4dd..167e10f 100644
--- a/arch/mn10300/include/asm/uaccess.h
+++ b/arch/mn10300/include/asm/uaccess.h
@@ -129,42 +129,47 @@
 struct __large_struct { unsigned long buf[100]; };
 #define __m(x) (*(struct __large_struct *)(x))
 
-#define __get_user_nocheck(x, ptr, size)	\
-({						\
-	__typeof(*(ptr)) __gu_val;		\
-	unsigned long __gu_addr;		\
-	int __gu_err;				\
-	__gu_addr = (unsigned long) (ptr);	\
-	switch (size) {				\
-	case 1:  __get_user_asm("bu"); break;	\
-	case 2:  __get_user_asm("hu"); break;	\
-	case 4:  __get_user_asm(""  ); break;	\
-	default: __get_user_unknown(); break;	\
-	}					\
-	x = (__typeof__(*(ptr))) __gu_val;	\
-	__gu_err;				\
+#define __get_user_nocheck(x, ptr, size)				\
+({									\
+	unsigned long __gu_addr;					\
+	int __gu_err;							\
+	__gu_addr = (unsigned long) (ptr);				\
+	switch (size) {							\
+	case 1: {							\
+		unsigned char __gu_val;					\
+		__get_user_asm("bu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 2: {							\
+		unsigned short __gu_val;				\
+		__get_user_asm("hu");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	case 4: {							\
+		unsigned int __gu_val;					\
+		__get_user_asm("");					\
+		(x) = *(__force __typeof__(*(ptr))*) &__gu_val;		\
+		break;							\
+	}								\
+	default:							\
+		__get_user_unknown();					\
+		break;							\
+	}								\
+	__gu_err;							\
 })
 
-#define __get_user_check(x, ptr, size)			\
-({							\
-	__typeof__(*(ptr)) __gu_val;			\
-	unsigned long __gu_addr;			\
-	int __gu_err;					\
-	__gu_addr = (unsigned long) (ptr);		\
-	if (likely(__access_ok(__gu_addr,size))) {	\
-		switch (size) {				\
-		case 1:  __get_user_asm("bu"); break;	\
-		case 2:  __get_user_asm("hu"); break;	\
-		case 4:  __get_user_asm(""  ); break;	\
-		default: __get_user_unknown(); break;	\
-		}					\
-	}						\
-	else {						\
-		__gu_err = -EFAULT;			\
-		__gu_val = 0;				\
-	}						\
-	x = (__typeof__(*(ptr))) __gu_val;		\
-	__gu_err;					\
+#define __get_user_check(x, ptr, size)					\
+({									\
+	int _e;								\
+	if (likely(__access_ok((unsigned long) (ptr), (size))))		\
+		_e = __get_user_nocheck((x), (ptr), (size));		\
+	else {								\
+		_e = -EFAULT;						\
+		(x) = (__typeof__(x))0;					\
+	}								\
+	_e;								\
 })
 
 #define __get_user_asm(INSN)					\
diff --git a/arch/mn10300/kernel/vmlinux.lds.S b/arch/mn10300/kernel/vmlinux.lds.S
index 76f41bd..10549dc 100644
--- a/arch/mn10300/kernel/vmlinux.lds.S
+++ b/arch/mn10300/kernel/vmlinux.lds.S
@@ -44,24 +44,8 @@
   RO_DATA(PAGE_SIZE)
 
   /* writeable */
-  .data : {			/* Data */
-	DATA_DATA
-	CONSTRUCTORS
-	}
-
-  .data_nosave : { NOSAVE_DATA; }
-
-  .data.page_aligned : { PAGE_ALIGNED_DATA(PAGE_SIZE); }
-  .data.cacheline_aligned : { CACHELINE_ALIGNED_DATA(32); }
-
-  /* rarely changed data like cpu maps */
-  . = ALIGN(32);
-  .data.read_mostly : AT(ADDR(.data.read_mostly)) {
-	READ_MOSTLY_DATA(32);
-	_edata = .;		/* End of data section */
-  }
-
-  .data.init_task : { INIT_TASK_DATA(THREAD_SIZE); }
+  RW_DATA_SECTION(32, PAGE_SIZE, THREAD_SIZE)
+  _edata = .;
 
   /* might get freed after init */
   . = ALIGN(PAGE_SIZE);
@@ -74,22 +58,8 @@
   /* will be freed after init */
   . = ALIGN(PAGE_SIZE);		/* Init code and data */
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT;
-	_einittext = .;
-  }
-  .init.data : { INIT_DATA; }
-  .setup.init : { INIT_SETUP(16); }
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-  .con_initcall.init : { CON_INITCALL; }
-
-  SECURITY_INIT
+  INIT_TEXT_SECTION(PAGE_SIZE)
+  INIT_DATA_SECTION(16)
   . = ALIGN(4);
   __alt_instructions = .;
   .altinstructions : { *(.altinstructions) }
@@ -100,8 +70,6 @@
 	.exit.text : { EXIT_TEXT; }
 	.exit.data : { EXIT_DATA; }
 
-  .init.ramfs : { INIT_RAM_FS; }
-
   PERCPU(32)
   . = ALIGN(PAGE_SIZE);
   __init_end = .;
diff --git a/arch/mn10300/unit-asb2303/include/unit/clock.h b/arch/mn10300/unit-asb2303/include/unit/clock.h
index 8b450e9..2a0bf79 100644
--- a/arch/mn10300/unit-asb2303/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2303/include/unit/clock.h
@@ -20,9 +20,9 @@
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
index 7d51484..67be3f2 100644
--- a/arch/mn10300/unit-asb2305/include/unit/clock.h
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -20,9 +20,9 @@
 extern unsigned long mn10300_iobclk;
 extern unsigned long mn10300_tsc_per_HZ;
 
-#define MN10300_IOCLK		((unsigned long)mn10300_ioclk)
+#define MN10300_IOCLK		mn10300_ioclk
 /* If this processors has a another clock, uncomment the below. */
-/* #define MN10300_IOBCLK	((unsigned long)mn10300_iobclk) */
+/* #define MN10300_IOBCLK	mn10300_iobclk */
 
 #else /* !CONFIG_MN10300_RTC */
 
@@ -35,7 +35,7 @@
 #define MN10300_TSCCLK		MN10300_IOCLK
 
 #ifdef CONFIG_MN10300_RTC
-#define MN10300_TSC_PER_HZ	((unsigned long)mn10300_tsc_per_HZ)
+#define MN10300_TSC_PER_HZ	mn10300_tsc_per_HZ
 #else /* !CONFIG_MN10300_RTC */
 #define MN10300_TSC_PER_HZ	(MN10300_TSCCLK/HZ)
 #endif /* !CONFIG_MN10300_RTC */
diff --git a/arch/parisc/include/asm/socket.h b/arch/parisc/include/asm/socket.h
index 960b1e5..225b7d6 100644
--- a/arch/parisc/include/asm/socket.h
+++ b/arch/parisc/include/asm/socket.h
@@ -59,6 +59,8 @@
 #define SO_TIMESTAMPING		0x4020
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x4021
+
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index aea1784..775be27 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -77,13 +77,7 @@
 	 */
 	. = ALIGN(PAGE_SIZE);
 	data_start = .;
-	. = ALIGN(16);
-	/* Exception table */
-	__ex_table : {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(16)
 
 	NOTES
 
@@ -94,23 +88,8 @@
 		__stop___unwind = .;
 	}
 
-	/* rarely changed data like cpu maps */
-	. = ALIGN(16);
-	.data.read_mostly : {
-		*(.data.read_mostly)
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
 	/* Data */
-	.data : {
-		DATA_DATA
-		CONSTRUCTORS
-	}
-
-	. = ALIGN(L1_CACHE_BYTES);
-	.data.cacheline_aligned : {
-		*(.data.cacheline_aligned)
-	}
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
 
 	/* PA-RISC locks requires 16-byte alignment */
 	. = ALIGN(16);
@@ -118,17 +97,6 @@
 		*(.data.lock_aligned)
 	}
 
-	/* nosave data is really only used for software suspend...it's here
-	 * just in case we ever implement it
-	 */
-	. = ALIGN(PAGE_SIZE);
-	__nosave_begin = .;
-	.data_nosave : {
-		*(.data.nosave)
-	}
-	. = ALIGN(PAGE_SIZE);
-	__nosave_end = .;
-
 	/* End of data section */
 	_edata = .;
 
@@ -147,14 +115,6 @@
 	}
 	__bss_stop = .;
 
-
-	/* assembler code expects init_task to be 16k aligned */
-	. = ALIGN(16384);
-	/* init_task */
-	.data.init_task : {
-		*(.data.init_task)
-	}
-
 #ifdef CONFIG_64BIT
 	. = ALIGN(16);
 	/* Linkage tables */
@@ -172,64 +132,8 @@
 	/* reserve space for interrupt stack by aligning __init* to 16k */
 	. = ALIGN(16384);
 	__init_begin = .;
-	.init.text : { 
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
-	.init.data : {
-		INIT_DATA
-	}
-	. = ALIGN(16);
-	.init.setup : {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-	.con_initcall.init : {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
-	SECURITY_INIT
-
-	/* alternate instruction replacement.  This is a mechanism x86 uses
-	 * to detect the CPU type and replace generic instruction sequences
-	 * with CPU specific ones.  We don't currently do this in PA, but
-	 * it seems like a good idea...
-	 */
-	. = ALIGN(4);
-	.altinstructions : {
-		__alt_instructions = .;
-		*(.altinstructions)
-		__alt_instructions_end = .; 
-	} 
-	.altinstr_replacement : {
-		*(.altinstr_replacement)
-	} 
-
-	/* .exit.text is discard at runtime, not link time, to deal with references
-	 *  from .altinstructions and .eh_frame
-	 */
-	.exit.text : {
-		EXIT_TEXT
-	}
-	.exit.data : {
-		EXIT_DATA
-	}
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
+	INIT_TEXT_SECTION(16384)
+	INIT_DATA_SECTION(16)
 
 	PERCPU(PAGE_SIZE)
 	. = ALIGN(PAGE_SIZE);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4fd4790..10a0a54 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -385,9 +385,15 @@
 
 config NODES_SHIFT
 	int
+	default "8" if PPC64
 	default "4"
 	depends on NEED_MULTIPLE_NODES
 
+config MAX_ACTIVE_REGIONS
+	int
+	default "256" if PPC64
+	default "32"
+
 config ARCH_SELECT_MEMORY_MODEL
 	def_bool y
 	depends on PPC64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index aacf629..1a54a3b 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -164,6 +164,17 @@
 
 boot := arch/$(ARCH)/boot
 
+ifeq ($(CONFIG_RELOCATABLE),y)
+quiet_cmd_relocs_check = CALL    $<
+      cmd_relocs_check = perl $< "$(OBJDUMP)" "$(obj)/vmlinux"
+
+PHONY += relocs_check
+relocs_check: arch/powerpc/relocs_check.pl vmlinux
+	$(call cmd,relocs_check)
+
+zImage: relocs_check
+endif
+
 $(BOOT_TARGETS): vmlinux
 	$(Q)$(MAKE) ARCH=ppc64 $(build)=$(boot) $(patsubst %,$(boot)/%,$@)
 
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index 9dade15..6d94d27 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -15,7 +15,16 @@
 
 	/* DMA operations on that device */
 	struct dma_map_ops	*dma_ops;
-	void			*dma_data;
+
+	/*
+	 * When an iommu is in use, dma_data is used as a ptr to the base of the
+	 * iommu_table.  Otherwise, it is a simple numerical offset.
+	 */
+	union {
+		dma_addr_t	dma_offset;
+		void		*iommu_table_base;
+	} dma_data;
+
 #ifdef CONFIG_SWIOTLB
 	dma_addr_t		max_direct_dma_addr;
 #endif
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index cb2ca41..e281dae 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -26,7 +26,6 @@
 extern void dma_direct_free_coherent(struct device *dev, size_t size,
 				     void *vaddr, dma_addr_t dma_handle);
 
-extern unsigned long get_dma_direct_offset(struct device *dev);
 
 #ifdef CONFIG_NOT_COHERENT_CACHE
 /*
@@ -90,6 +89,28 @@
 	dev->archdata.dma_ops = ops;
 }
 
+/*
+ * get_dma_offset()
+ *
+ * Get the dma offset on configurations where the dma address can be determined
+ * from the physical address by looking at a simple offset.  Direct dma and
+ * swiotlb use this function, but it is typically not used by implementations
+ * with an iommu.
+ */
+static inline dma_addr_t get_dma_offset(struct device *dev)
+{
+	if (dev)
+		return dev->archdata.dma_data.dma_offset;
+
+	return PCI_DRAM_OFFSET;
+}
+
+static inline void set_dma_offset(struct device *dev, dma_addr_t off)
+{
+	if (dev)
+		dev->archdata.dma_data.dma_offset = off;
+}
+
 /* this will be removed soon */
 #define flush_write_buffers()
 
@@ -181,12 +202,12 @@
 
 static inline dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
 {
-	return paddr + get_dma_direct_offset(dev);
+	return paddr + get_dma_offset(dev);
 }
 
 static inline phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
 {
-	return daddr - get_dma_direct_offset(dev);
+	return daddr - get_dma_offset(dev);
 }
 
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
diff --git a/arch/powerpc/include/asm/iommu.h b/arch/powerpc/include/asm/iommu.h
index 7464c0d..edfc980 100644
--- a/arch/powerpc/include/asm/iommu.h
+++ b/arch/powerpc/include/asm/iommu.h
@@ -70,6 +70,16 @@
 
 struct scatterlist;
 
+static inline void set_iommu_table_base(struct device *dev, void *base)
+{
+	dev->archdata.dma_data.iommu_table_base = base;
+}
+
+static inline void *get_iommu_table_base(struct device *dev)
+{
+	return dev->archdata.dma_data.iommu_table_base;
+}
+
 /* Frees table for an individual device node */
 extern void iommu_free_table(struct iommu_table *tbl, const char *node_name);
 
diff --git a/arch/powerpc/include/asm/pmc.h b/arch/powerpc/include/asm/pmc.h
index ccc68b5..5a9ede4 100644
--- a/arch/powerpc/include/asm/pmc.h
+++ b/arch/powerpc/include/asm/pmc.h
@@ -29,7 +29,7 @@
 void release_pmc_hardware(void);
 void ppc_enable_pmcs(void);
 
-#ifdef CONFIG_PPC64
+#ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/lppaca.h>
 
 static inline void ppc_set_pmu_inuse(int inuse)
diff --git a/arch/powerpc/include/asm/pte-40x.h b/arch/powerpc/include/asm/pte-40x.h
index 6c3e1f4..ec0b0b0 100644
--- a/arch/powerpc/include/asm/pte-40x.h
+++ b/arch/powerpc/include/asm/pte-40x.h
@@ -43,6 +43,7 @@
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
 #define	_PAGE_USER	0x010	/* matches one of the zone permission bits */
+#define	_PAGE_SPECIAL	0x020	/* software: Special page */
 #define	_PAGE_RW	0x040	/* software: Writes permitted */
 #define	_PAGE_DIRTY	0x080	/* software: dirty page */
 #define _PAGE_HWWRITE	0x100	/* hardware: Dirty & RW, set in exception */
diff --git a/arch/powerpc/include/asm/pte-8xx.h b/arch/powerpc/include/asm/pte-8xx.h
index 94e9797..dd5ea95 100644
--- a/arch/powerpc/include/asm/pte-8xx.h
+++ b/arch/powerpc/include/asm/pte-8xx.h
@@ -32,6 +32,7 @@
 #define _PAGE_FILE	0x0002	/* when !present: nonlinear file mapping */
 #define _PAGE_NO_CACHE	0x0002	/* I: cache inhibit */
 #define _PAGE_SHARED	0x0004	/* No ASID (context) compare */
+#define _PAGE_SPECIAL	0x0008	/* SW entry, forced to 0 by the TLB miss */
 
 /* These five software bits must be masked out when the entry is loaded
  * into the TLB.
diff --git a/arch/powerpc/include/asm/pte-common.h b/arch/powerpc/include/asm/pte-common.h
index c3b6507..f2b3701 100644
--- a/arch/powerpc/include/asm/pte-common.h
+++ b/arch/powerpc/include/asm/pte-common.h
@@ -25,9 +25,6 @@
 #ifndef _PAGE_WRITETHRU
 #define _PAGE_WRITETHRU	0
 #endif
-#ifndef _PAGE_SPECIAL
-#define _PAGE_SPECIAL	0
-#endif
 #ifndef _PAGE_4K_PFN
 #define _PAGE_4K_PFN		0
 #endif
@@ -179,7 +176,5 @@
 #define HAVE_PAGE_AGP
 
 /* Advertise support for _PAGE_SPECIAL */
-#ifdef _PAGE_SPECIAL
 #define __HAVE_ARCH_PTE_SPECIAL
-#endif
 
diff --git a/arch/powerpc/include/asm/socket.h b/arch/powerpc/include/asm/socket.h
index 3ab8b3e..866f760 100644
--- a/arch/powerpc/include/asm/socket.h
+++ b/arch/powerpc/include/asm/socket.h
@@ -67,4 +67,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _ASM_POWERPC_SOCKET_H */
diff --git a/arch/powerpc/kernel/dma-iommu.c b/arch/powerpc/kernel/dma-iommu.c
index 87ddb3f..37771a5 100644
--- a/arch/powerpc/kernel/dma-iommu.c
+++ b/arch/powerpc/kernel/dma-iommu.c
@@ -18,7 +18,7 @@
 static void *dma_iommu_alloc_coherent(struct device *dev, size_t size,
 				      dma_addr_t *dma_handle, gfp_t flag)
 {
-	return iommu_alloc_coherent(dev, dev->archdata.dma_data, size,
+	return iommu_alloc_coherent(dev, get_iommu_table_base(dev), size,
 				    dma_handle, device_to_mask(dev), flag,
 				    dev_to_node(dev));
 }
@@ -26,7 +26,7 @@
 static void dma_iommu_free_coherent(struct device *dev, size_t size,
 				    void *vaddr, dma_addr_t dma_handle)
 {
-	iommu_free_coherent(dev->archdata.dma_data, size, vaddr, dma_handle);
+	iommu_free_coherent(get_iommu_table_base(dev), size, vaddr, dma_handle);
 }
 
 /* Creates TCEs for a user provided buffer.  The user buffer must be
@@ -39,8 +39,8 @@
 				     enum dma_data_direction direction,
 				     struct dma_attrs *attrs)
 {
-	return iommu_map_page(dev, dev->archdata.dma_data, page, offset, size,
-			      device_to_mask(dev), direction, attrs);
+	return iommu_map_page(dev, get_iommu_table_base(dev), page, offset,
+			      size, device_to_mask(dev), direction, attrs);
 }
 
 
@@ -48,7 +48,7 @@
 				 size_t size, enum dma_data_direction direction,
 				 struct dma_attrs *attrs)
 {
-	iommu_unmap_page(dev->archdata.dma_data, dma_handle, size, direction,
+	iommu_unmap_page(get_iommu_table_base(dev), dma_handle, size, direction,
 			 attrs);
 }
 
@@ -57,7 +57,7 @@
 			    int nelems, enum dma_data_direction direction,
 			    struct dma_attrs *attrs)
 {
-	return iommu_map_sg(dev, dev->archdata.dma_data, sglist, nelems,
+	return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
 			    device_to_mask(dev), direction, attrs);
 }
 
@@ -65,14 +65,14 @@
 		int nelems, enum dma_data_direction direction,
 		struct dma_attrs *attrs)
 {
-	iommu_unmap_sg(dev->archdata.dma_data, sglist, nelems, direction,
+	iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
 		       attrs);
 }
 
 /* We support DMA to/from any memory page via the iommu */
 static int dma_iommu_dma_supported(struct device *dev, u64 mask)
 {
-	struct iommu_table *tbl = dev->archdata.dma_data;
+	struct iommu_table *tbl = get_iommu_table_base(dev);
 
 	if (!tbl || tbl->it_offset > mask) {
 		printk(KERN_INFO
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 21b784d..6215062 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -21,13 +21,6 @@
  * default the offset is PCI_DRAM_OFFSET.
  */
 
-unsigned long get_dma_direct_offset(struct device *dev)
-{
-	if (dev)
-		return (unsigned long)dev->archdata.dma_data;
-
-	return PCI_DRAM_OFFSET;
-}
 
 void *dma_direct_alloc_coherent(struct device *dev, size_t size,
 				dma_addr_t *dma_handle, gfp_t flag)
@@ -37,7 +30,7 @@
 	ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
 	if (ret == NULL)
 		return NULL;
-	*dma_handle += get_dma_direct_offset(dev);
+	*dma_handle += get_dma_offset(dev);
 	return ret;
 #else
 	struct page *page;
@@ -51,7 +44,7 @@
 		return NULL;
 	ret = page_address(page);
 	memset(ret, 0, size);
-	*dma_handle = virt_to_abs(ret) + get_dma_direct_offset(dev);
+	*dma_handle = virt_to_abs(ret) + get_dma_offset(dev);
 
 	return ret;
 #endif
@@ -75,7 +68,7 @@
 	int i;
 
 	for_each_sg(sgl, sg, nents, i) {
-		sg->dma_address = sg_phys(sg) + get_dma_direct_offset(dev);
+		sg->dma_address = sg_phys(sg) + get_dma_offset(dev);
 		sg->dma_length = sg->length;
 		__dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
 	}
@@ -110,7 +103,7 @@
 {
 	BUG_ON(dir == DMA_NONE);
 	__dma_sync_page(page, offset, size, dir);
-	return page_to_phys(page) + offset + get_dma_direct_offset(dev);
+	return page_to_phys(page) + offset + get_dma_offset(dev);
 }
 
 static inline void dma_direct_unmap_page(struct device *dev,
diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S
index 9048f96..24dcc0e 100644
--- a/arch/powerpc/kernel/exceptions-64e.S
+++ b/arch/powerpc/kernel/exceptions-64e.S
@@ -17,7 +17,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/thread_info.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/bug.h>
 #include <asm/irqflags.h>
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index e9f4840..bb8209e 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1117,7 +1117,7 @@
 
 		/* Hook up default DMA ops */
 		sd->dma_ops = pci_dma_ops;
-		sd->dma_data = (void *)PCI_DRAM_OFFSET;
+		set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
 
 		/* Additional platform DMA/iommu setup */
 		if (ppc_md.pci_dma_dev_setup)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 0a32164..1168c5f 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1165,7 +1165,22 @@
 
 unsigned long arch_randomize_brk(struct mm_struct *mm)
 {
-	unsigned long ret = PAGE_ALIGN(mm->brk + brk_rnd());
+	unsigned long base = mm->brk;
+	unsigned long ret;
+
+#ifdef CONFIG_PPC64
+	/*
+	 * If we are using 1TB segments and we are allowed to randomise
+	 * the heap, we can put it above 1TB so it is backed by a 1TB
+	 * segment. Otherwise the heap will be in the bottom 1TB
+	 * which always uses 256MB segments and this may result in a
+	 * performance penalty.
+	 */
+	if (!is_32bit_task() && (mmu_highuser_ssize == MMU_SEGSIZE_1T))
+		base = max_t(unsigned long, mm->brk, 1UL << SID_SHIFT_1T);
+#endif
+
+	ret = PAGE_ALIGN(base + brk_rnd());
 
 	if (ret < mm->brk)
 		return mm->brk;
diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c
index 864334b..bafac2e 100644
--- a/arch/powerpc/kernel/prom_init.c
+++ b/arch/powerpc/kernel/prom_init.c
@@ -800,7 +800,7 @@
 	root = call_prom("open", 1, 1, ADDR("/"));
 	if (root != 0) {
 		/* try calling the ibm,client-architecture-support method */
-		prom_printf("Calling ibm,client-architecture...");
+		prom_printf("Calling ibm,client-architecture-support...");
 		if (call_prom_ret("call-method", 3, 2, &ret,
 				  ADDR("ibm,client-architecture-support"),
 				  root,
@@ -814,6 +814,7 @@
 			return;
 		}
 		call_prom("close", 1, 0, root);
+		prom_printf(" not implemented\n");
 	}
 
 	/* no ibm,client-architecture-support call, try the old way */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 3faaf29..94e2df3 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -241,6 +241,13 @@
 	}
 
 	/*
+	 * Put vDSO base into mm struct. We need to do this before calling
+	 * install_special_mapping or the perf counter mmap tracking code
+	 * will fail to recognise it as a vDSO (since arch_vma_name fails).
+	 */
+	current->mm->context.vdso_base = vdso_base;
+
+	/*
 	 * our vma flags don't have VM_WRITE so by default, the process isn't
 	 * allowed to write those pages.
 	 * gdb can break that with ptrace interface, and thus trigger COW on
@@ -260,11 +267,10 @@
 				     VM_MAYREAD|VM_MAYWRITE|VM_MAYEXEC|
 				     VM_ALWAYSDUMP,
 				     vdso_pagelist);
-	if (rc)
+	if (rc) {
+		current->mm->context.vdso_base = 0;
 		goto fail_mmapsem;
-
-	/* Put vDSO base into mm struct */
-	current->mm->context.vdso_base = vdso_base;
+	}
 
 	up_write(&mm->mmap_sem);
 	return 0;
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index bc7b41e..77f6421 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -1054,6 +1054,8 @@
 		return NULL;
 
 	tbl = kmalloc(sizeof(*tbl), GFP_KERNEL);
+	if (tbl == NULL)
+		return NULL;
 
 	of_parse_dma_window(dev->dev.archdata.of_node, dma_window,
 			    &tbl->it_index, &offset, &size);
@@ -1233,7 +1235,7 @@
 		vio_cmo_set_dma_ops(viodev);
 	else
 		viodev->dev.archdata.dma_ops = &dma_iommu_ops;
-	viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev);
+	set_iommu_table_base(&viodev->dev, vio_build_iommu_table(viodev));
 	set_dev_node(&viodev->dev, of_node_to_nid(of_node));
 
 	/* init generic 'struct device' fields: */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 58da407..f564293 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -6,6 +6,7 @@
 #include <asm/page.h>
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
+#include <asm/thread_info.h>
 
 ENTRY(_stext)
 
@@ -71,12 +72,7 @@
 	/* Read-only data */
 	RODATA
 
-	/* Exception & bug tables */
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	}
+	EXCEPTION_TABLE(0)
 
 	NOTES :kernel :notes
 
@@ -93,12 +89,7 @@
  */
 	. = ALIGN(PAGE_SIZE);
 	__init_begin = .;
-
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	} :kernel
+	INIT_TEXT_SECTION(PAGE_SIZE) :kernel
 
 	/* .exit.text is discarded at runtime, not link time,
 	 * to deal with references from __bug_table
@@ -122,23 +113,16 @@
 #endif
 	}
 
-	. = ALIGN(16);
 	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
+		INIT_SETUP(16)
 	}
 
 	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-		}
+		INIT_CALLS
+	}
 
 	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
+		CON_INITCALL
 	}
 
 	SECURITY_INIT
@@ -169,14 +153,10 @@
 		__stop___fw_ftr_fixup = .;
 	}
 #endif
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
 	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
+		INIT_RAM_FS
 	}
-#endif
+
 	PERCPU(PAGE_SIZE)
 
 	. = ALIGN(8);
@@ -240,36 +220,24 @@
 #endif
 
 	/* The initial task and kernel stack */
-#ifdef CONFIG_PPC32
-	. = ALIGN(8192);
-#else
-	. = ALIGN(16384);
-#endif
 	.data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
-		*(.data.page_aligned)
+		PAGE_ALIGNED_DATA(PAGE_SIZE)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
-		*(.data.cacheline_aligned)
+		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(L1_CACHE_BYTES);
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
-		*(.data.read_mostly)
+		READ_MOSTLY_DATA(L1_CACHE_BYTES)
 	}
 
-	. = ALIGN(PAGE_SIZE);
 	.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
+		NOSAVE_DATA
 	}
 
 	. = ALIGN(PAGE_SIZE);
@@ -280,14 +248,7 @@
  * And finally the bss
  */
 
-	.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
-		__bss_start = .;
-		*(.sbss) *(.scommon)
-		*(.dynbss)
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-	}
+	BSS_SECTION(0, 0, 0)
 
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
diff --git a/arch/powerpc/kvm/timing.c b/arch/powerpc/kvm/timing.c
index 47ee603..2aa371e 100644
--- a/arch/powerpc/kvm/timing.c
+++ b/arch/powerpc/kvm/timing.c
@@ -201,7 +201,7 @@
 	return single_open(file, kvmppc_exit_timing_show, inode->i_private);
 }
 
-static struct file_operations kvmppc_exit_timing_fops = {
+static const struct file_operations kvmppc_exit_timing_fops = {
 	.owner   = THIS_MODULE,
 	.open    = kvmppc_exit_timing_open,
 	.read    = seq_read,
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index 83f1551..5304093 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -30,6 +30,8 @@
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
 
+#include "mmu_decl.h"
+
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
 #ifdef CONFIG_SMP
@@ -166,7 +168,7 @@
  * support falls into the same category.
  */
 
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	pte = __pte(pte_val(pte) & ~_PAGE_HPTEFLAGS);
 	if (pte_looks_normal(pte) && !(cpu_has_feature(CPU_FTR_COHERENT_ICACHE) ||
@@ -175,6 +177,17 @@
 		if (!pg)
 			return pte;
 		if (!test_bit(PG_arch_1, &pg->flags)) {
+#ifdef CONFIG_8xx
+			/* On 8xx, cache control instructions (particularly
+			 * "dcbst" from flush_dcache_icache) fault as write
+			 * operation if there is an unpopulated TLB entry
+			 * for the address in question. To workaround that,
+			 * we invalidate the TLB here, thus avoiding dcbst
+			 * misbehaviour.
+			 */
+			/* 8xx doesn't care about PID, size or ind args */
+			_tlbil_va(addr, 0, 0, 0);
+#endif /* CONFIG_8xx */
 			flush_dcache_icache_page(pg);
 			set_bit(PG_arch_1, &pg->flags);
 		}
@@ -194,7 +207,7 @@
  * as we don't have two bits to spare for _PAGE_EXEC and _PAGE_HWEXEC so
  * instead we "filter out" the exec permission for non clean pages.
  */
-static pte_t set_pte_filter(pte_t pte)
+static pte_t set_pte_filter(pte_t pte, unsigned long addr)
 {
 	struct page *pg;
 
@@ -276,7 +289,7 @@
 	 * this context might not have been activated yet when this
 	 * is called.
 	 */
-	pte = set_pte_filter(pte);
+	pte = set_pte_filter(pte, addr);
 
 	/* Perform the setting of the PTE */
 	__set_pte_at(mm, addr, ptep, pte, 0);
diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S
index ef1cccf..f288279 100644
--- a/arch/powerpc/mm/tlb_low_64e.S
+++ b/arch/powerpc/mm/tlb_low_64e.S
@@ -18,7 +18,6 @@
 #include <asm/asm-offsets.h>
 #include <asm/cputable.h>
 #include <asm/pgtable.h>
-#include <asm/reg.h>
 #include <asm/exception-64e.h>
 #include <asm/ppc-opcode.h>
 
diff --git a/arch/powerpc/platforms/cell/beat_iommu.c b/arch/powerpc/platforms/cell/beat_iommu.c
index 93b0efd..39d361c 100644
--- a/arch/powerpc/platforms/cell/beat_iommu.c
+++ b/arch/powerpc/platforms/cell/beat_iommu.c
@@ -77,7 +77,7 @@
 static void celleb_dma_dev_setup(struct device *dev)
 {
 	dev->archdata.dma_ops = get_pci_dma_ops();
-	dev->archdata.dma_data = (void *)celleb_dma_direct_offset;
+	set_dma_offset(dev, celleb_dma_direct_offset);
 }
 
 static void celleb_pci_dma_dev_setup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/cell/iommu.c b/arch/powerpc/platforms/cell/iommu.c
index 416db17..ca5bfdf 100644
--- a/arch/powerpc/platforms/cell/iommu.c
+++ b/arch/powerpc/platforms/cell/iommu.c
@@ -657,15 +657,13 @@
 
 static void cell_dma_dev_setup(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
-
 	/* Order is important here, these are not mutually exclusive */
 	if (get_dma_ops(dev) == &dma_iommu_fixed_ops)
 		cell_dma_dev_setup_fixed(dev);
 	else if (get_pci_dma_ops() == &dma_iommu_ops)
-		archdata->dma_data = cell_get_iommu_table(dev);
+		set_iommu_table_base(dev, cell_get_iommu_table(dev));
 	else if (get_pci_dma_ops() == &dma_direct_ops)
-		archdata->dma_data = (void *)cell_dma_direct_offset;
+		set_dma_offset(dev, cell_dma_direct_offset);
 	else
 		BUG();
 }
@@ -973,11 +971,10 @@
 
 static void cell_dma_dev_setup_fixed(struct device *dev)
 {
-	struct dev_archdata *archdata = &dev->archdata;
 	u64 addr;
 
 	addr = cell_iommu_get_fixed_address(dev) + dma_iommu_fixed_base;
-	archdata->dma_data = (void *)addr;
+	set_dma_offset(dev, addr);
 
 	dev_dbg(dev, "iommu: fixed addr = %llx\n", addr);
 }
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 8f079b8..884e8bc 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -147,7 +147,7 @@
 	__simple_attr_check_format(__fmt, 0ull);			\
 	return spufs_attr_open(inode, file, __get, __set, __fmt);	\
 }									\
-static struct file_operations __fops = {				\
+static const struct file_operations __fops = {				\
 	.owner	 = THIS_MODULE,						\
 	.open	 = __fops ## _open,					\
 	.release = spufs_attr_release,					\
@@ -309,7 +309,7 @@
 	return len;
 }
 
-static struct vm_operations_struct spufs_mem_mmap_vmops = {
+static const struct vm_operations_struct spufs_mem_mmap_vmops = {
 	.fault = spufs_mem_mmap_fault,
 	.access = spufs_mem_mmap_access,
 };
@@ -436,7 +436,7 @@
 	return spufs_ps_fault(vma, vmf, 0x4000, SPUFS_CNTL_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_cntl_mmap_vmops = {
+static const struct vm_operations_struct spufs_cntl_mmap_vmops = {
 	.fault = spufs_cntl_mmap_fault,
 };
 
@@ -1143,7 +1143,7 @@
 #endif
 }
 
-static struct vm_operations_struct spufs_signal1_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal1_mmap_vmops = {
 	.fault = spufs_signal1_mmap_fault,
 };
 
@@ -1279,7 +1279,7 @@
 #endif
 }
 
-static struct vm_operations_struct spufs_signal2_mmap_vmops = {
+static const struct vm_operations_struct spufs_signal2_mmap_vmops = {
 	.fault = spufs_signal2_mmap_fault,
 };
 
@@ -1397,7 +1397,7 @@
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_MSS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mss_mmap_vmops = {
+static const struct vm_operations_struct spufs_mss_mmap_vmops = {
 	.fault = spufs_mss_mmap_fault,
 };
 
@@ -1458,7 +1458,7 @@
 	return spufs_ps_fault(vma, vmf, 0x0000, SPUFS_PS_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_psmap_mmap_vmops = {
+static const struct vm_operations_struct spufs_psmap_mmap_vmops = {
 	.fault = spufs_psmap_mmap_fault,
 };
 
@@ -1517,7 +1517,7 @@
 	return spufs_ps_fault(vma, vmf, 0x3000, SPUFS_MFC_MAP_SIZE);
 }
 
-static struct vm_operations_struct spufs_mfc_mmap_vmops = {
+static const struct vm_operations_struct spufs_mfc_mmap_vmops = {
 	.fault = spufs_mfc_mmap_fault,
 };
 
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index 6c1e101..9d53cb4 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -193,7 +193,7 @@
 		pdn->iommu_table = iommu_init_table(tbl, -1);
 	else
 		kfree(tbl);
-	pdev->dev.archdata.dma_data = pdn->iommu_table;
+	set_iommu_table_base(&pdev->dev, pdn->iommu_table);
 }
 #else
 #define pci_dma_dev_setup_iseries	NULL
diff --git a/arch/powerpc/platforms/pasemi/iommu.c b/arch/powerpc/platforms/pasemi/iommu.c
index a0ff03a..7b1d608 100644
--- a/arch/powerpc/platforms/pasemi/iommu.c
+++ b/arch/powerpc/platforms/pasemi/iommu.c
@@ -189,7 +189,7 @@
 	}
 #endif
 
-	dev->dev.archdata.dma_data = &iommu_table_iobmap;
+	set_iommu_table_base(&dev->dev, &iommu_table_iobmap);
 }
 
 static void pci_dma_bus_setup_null(struct pci_bus *b) { }
diff --git a/arch/powerpc/platforms/pseries/dtl.c b/arch/powerpc/platforms/pseries/dtl.c
index ab69925..937a544 100644
--- a/arch/powerpc/platforms/pseries/dtl.c
+++ b/arch/powerpc/platforms/pseries/dtl.c
@@ -209,7 +209,7 @@
 	return n_read * sizeof(struct dtl_entry);
 }
 
-static struct file_operations dtl_fops = {
+static const struct file_operations dtl_fops = {
 	.open		= dtl_file_open,
 	.release	= dtl_file_release,
 	.read		= dtl_file_read,
diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c
index 661c8e0..1a0000a 100644
--- a/arch/powerpc/platforms/pseries/iommu.c
+++ b/arch/powerpc/platforms/pseries/iommu.c
@@ -482,7 +482,7 @@
 				   phb->node);
 		iommu_table_setparms(phb, dn, tbl);
 		PCI_DN(dn)->iommu_table = iommu_init_table(tbl, phb->node);
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 		return;
 	}
 
@@ -494,7 +494,7 @@
 		dn = dn->parent;
 
 	if (dn && PCI_DN(dn))
-		dev->dev.archdata.dma_data = PCI_DN(dn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(dn)->iommu_table);
 	else
 		printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
 		       pci_name(dev));
@@ -538,7 +538,7 @@
 	 */
 	if (dma_window == NULL || pdn->parent == NULL) {
 		pr_debug("  no dma window for device, linking to parent\n");
-		dev->dev.archdata.dma_data = PCI_DN(pdn)->iommu_table;
+		set_iommu_table_base(&dev->dev, PCI_DN(pdn)->iommu_table);
 		return;
 	}
 
@@ -554,7 +554,7 @@
 		pr_debug("  found DMA window, table: %p\n", pci->iommu_table);
 	}
 
-	dev->dev.archdata.dma_data = pci->iommu_table;
+	set_iommu_table_base(&dev->dev, pci->iommu_table);
 }
 #else  /* CONFIG_PCI */
 #define pci_dma_bus_setup_pSeries	NULL
diff --git a/arch/powerpc/relocs_check.pl b/arch/powerpc/relocs_check.pl
new file mode 100755
index 0000000..d257109
--- /dev/null
+++ b/arch/powerpc/relocs_check.pl
@@ -0,0 +1,56 @@
+#!/usr/bin/perl
+
+# Copyright © 2009 IBM Corporation
+
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+
+# This script checks the relcoations of a vmlinux for "suspicious"
+# relocations.
+
+use strict;
+use warnings;
+
+if ($#ARGV != 1) {
+	die "$0 [path to objdump] [path to vmlinux]\n";
+}
+
+# Have Kbuild supply the path to objdump so we handle cross compilation.
+my $objdump = shift;
+my $vmlinux = shift;
+my $bad_relocs_count = 0;
+my $bad_relocs = "";
+my $old_binutils = 0;
+
+open(FD, "$objdump -R $vmlinux|") or die;
+while (<FD>) {
+	study $_;
+
+	# Only look at relcoation lines.
+	next if (!/\s+R_/);
+
+	# These relocations are okay
+	next if (/R_PPC64_RELATIVE/ or /R_PPC64_NONE/ or
+	         /R_PPC64_ADDR64\s+mach_/);
+
+	# If we see this type of relcoation it's an idication that
+	# we /may/ be using an old version of binutils.
+	if (/R_PPC64_UADDR64/) {
+		$old_binutils++;
+	}
+
+	$bad_relocs_count++;
+	$bad_relocs .= $_;
+}
+
+if ($bad_relocs_count) {
+	print "WARNING: $bad_relocs_count bad relocations\n";
+	print $bad_relocs;
+}
+
+if ($old_binutils) {
+	print "WARNING: You need at binutils >= 2.19 to build a ".
+	      "CONFIG_RELCOATABLE kernel\n";
+}
diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c
index 89639ec..ae3c4db 100644
--- a/arch/powerpc/sysdev/dart_iommu.c
+++ b/arch/powerpc/sysdev/dart_iommu.c
@@ -297,7 +297,7 @@
 	/* We only have one iommu table on the mac for now, which makes
 	 * things simple. Setup all PCI devices to point to this table
 	 */
-	dev->dev.archdata.dma_data = &iommu_table_dart;
+	set_iommu_table_base(&dev->dev, &iommu_table_dart);
 }
 
 static void pci_dma_bus_setup_dart(struct pci_bus *bus)
diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c
index 0e09a45..c6f0a71b 100644
--- a/arch/powerpc/xmon/xmon.c
+++ b/arch/powerpc/xmon/xmon.c
@@ -335,6 +335,16 @@
 }
 #endif
 
+static inline int unrecoverable_excp(struct pt_regs *regs)
+{
+#ifdef CONFIG_4xx
+	/* We have no MSR_RI bit on 4xx, so we simply return false */
+	return 0;
+#else
+	return ((regs->msr & MSR_RI) == 0);
+#endif
+}
+
 static int xmon_core(struct pt_regs *regs, int fromipi)
 {
 	int cmd = 0;
@@ -388,7 +398,7 @@
 	bp = NULL;
 	if ((regs->msr & (MSR_IR|MSR_PR|MSR_SF)) == (MSR_IR|MSR_SF))
 		bp = at_breakpoint(regs->nip);
-	if (bp || (regs->msr & MSR_RI) == 0)
+	if (bp || unrecoverable_excp(regs))
 		fromipi = 0;
 
 	if (!fromipi) {
@@ -399,7 +409,7 @@
 			       cpu, BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		release_output_lock();
@@ -490,7 +500,7 @@
 			printf("Stopped at breakpoint %x (", BP_NUM(bp));
 			xmon_print_symbol(regs->nip, " ", ")\n");
 		}
-		if ((regs->msr & MSR_RI) == 0)
+		if (unrecoverable_excp(regs))
 			printf("WARNING: exception is not recoverable, "
 			       "can't continue\n");
 		remove_bpts();
diff --git a/arch/s390/include/asm/socket.h b/arch/s390/include/asm/socket.h
index e42df89..fdff1e9 100644
--- a/arch/s390/include/asm/socket.h
+++ b/arch/s390/include/asm/socket.h
@@ -68,4 +68,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index 96bc169..5f9881e1 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -121,6 +121,7 @@
 struct sh_eth_plat_data sh_eth_plat = {
 	.phy = 0x1f, /* SMSC LAN8700 */
 	.edmac_endian = EDMAC_LITTLE_ENDIAN,
+	.ether_link_active_low = 1
 };
 
 static struct platform_device sh_eth_device = {
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 00973e0..e78c3be 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -22,6 +22,7 @@
 #include <linux/usb/r8a66597.h>
 #include <video/sh_mobile_lcdc.h>
 #include <media/sh_mobile_ceu.h>
+#include <sound/sh_fsi.h>
 #include <asm/io.h>
 #include <asm/heartbeat.h>
 #include <asm/sh_eth.h>
@@ -255,6 +256,65 @@
 	},
 };
 
+/* FSI */
+/*
+ * FSI-A use external clock which came from ak464x.
+ * So, we should change parent of fsi
+ */
+#define FCLKACR		0xa4150008
+static void fsimck_init(struct clk *clk)
+{
+	u32 status = ctrl_inl(clk->enable_reg);
+
+	/* use external clock */
+	status &= ~0x000000ff;
+	status |= 0x00000080;
+	ctrl_outl(status, clk->enable_reg);
+}
+
+static struct clk_ops fsimck_clk_ops = {
+	.init = fsimck_init,
+};
+
+static struct clk fsimcka_clk = {
+	.name		= "fsimcka_clk",
+	.id		= -1,
+	.ops		= &fsimck_clk_ops,
+	.enable_reg	= (void __iomem *)FCLKACR,
+	.rate		= 0, /* unknown */
+};
+
+struct sh_fsi_platform_info fsi_info = {
+	.porta_flags = SH_FSI_BRS_INV |
+		       SH_FSI_OUT_SLAVE_MODE |
+		       SH_FSI_IN_SLAVE_MODE |
+		       SH_FSI_OFMT(PCM) |
+		       SH_FSI_IFMT(PCM),
+};
+
+static struct resource fsi_resources[] = {
+	[0] = {
+		.name	= "FSI",
+		.start	= 0xFE3C0000,
+		.end	= 0xFE3C021d,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = 108,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device fsi_device = {
+	.name		= "sh_fsi",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(fsi_resources),
+	.resource	= fsi_resources,
+	.dev	= {
+		.platform_data	= &fsi_info,
+	},
+};
+
 /* KEYSC in SoC (Needs SW33-2 set to ON) */
 static struct sh_keysc_info keysc_info = {
 	.mode = SH_KEYSC_MODE_1,
@@ -399,6 +459,7 @@
 	&sh_eth_device,
 	&sh7724_usb0_host_device,
 	&sh7724_usb1_gadget_device,
+	&fsi_device,
 };
 
 #define EEPROM_OP   0xBA206000
@@ -466,11 +527,13 @@
 static int __init devices_setup(void)
 {
 	u16 sw = ctrl_inw(SW4140); /* select camera, monitor */
+	struct clk *fsia_clk;
 
 	/* Reset Release */
 	ctrl_outw(ctrl_inw(FPGA_OUT) &
 		  ~((1 << 1)  | /* LAN */
 		    (1 << 6)  | /* VIDEO DAC */
+		    (1 << 7)  | /* AK4643 */
 		    (1 << 12) | /* USB0 */
 		    (1 << 14)), /* RMII */
 		  FPGA_OUT);
@@ -609,6 +672,32 @@
 	gpio_request(GPIO_FN_KEYOUT1,     NULL);
 	gpio_request(GPIO_FN_KEYOUT0,     NULL);
 
+	/* enable FSI */
+	gpio_request(GPIO_FN_FSIMCKB,    NULL);
+	gpio_request(GPIO_FN_FSIMCKA,    NULL);
+	gpio_request(GPIO_FN_FSIOASD,    NULL);
+	gpio_request(GPIO_FN_FSIIABCK,   NULL);
+	gpio_request(GPIO_FN_FSIIALRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOABCK,   NULL);
+	gpio_request(GPIO_FN_FSIOALRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
+	gpio_request(GPIO_FN_FSIIBSD,    NULL);
+	gpio_request(GPIO_FN_FSIOBSD,    NULL);
+	gpio_request(GPIO_FN_FSIIBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIIBLRCK,  NULL);
+	gpio_request(GPIO_FN_FSIOBBCK,   NULL);
+	gpio_request(GPIO_FN_FSIOBLRCK,  NULL);
+	gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
+	gpio_request(GPIO_FN_FSIIASD,    NULL);
+
+	/* change parent of FSI A */
+	fsia_clk = clk_get(NULL, "fsia_clk");
+	clk_register(&fsimcka_clk);
+	clk_set_parent(fsia_clk, &fsimcka_clk);
+	clk_set_rate(fsia_clk, 11000);
+	clk_set_rate(&fsimcka_clk, 11000);
+	clk_put(fsia_clk);
+
 	/*
 	 * enable SH-Eth
 	 *
diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig
index 6c38a43..2f78d01 100644
--- a/arch/sh/configs/ap325rxa_defconfig
+++ b/arch/sh/configs/ap325rxa_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:04:11 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:22:50 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -107,6 +118,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 CONFIG_CPU_SUBTYPE_SH7723=y
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp"
 
 #
@@ -316,7 +334,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -364,6 +388,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +418,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +426,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +438,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -422,9 +448,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -480,6 +506,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -583,7 +610,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -637,12 +663,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -726,6 +750,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -736,6 +761,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -757,9 +783,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -780,6 +803,11 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -804,11 +832,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +860,12 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -957,6 +993,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -992,6 +1030,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1003,6 +1042,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1056,8 +1096,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1122,7 +1164,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1202,6 +1243,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1212,8 +1254,11 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1221,6 +1266,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1234,7 +1280,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1275,11 +1320,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1341,5 +1388,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig
index 95717a0..aedbd4f 100644
--- a/arch/sh/configs/dreamcast_defconfig
+++ b/arch/sh/configs/dreamcast_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:24:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:07 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -86,19 +96,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -108,6 +119,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +234,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,7 +339,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 panic=3"
 
 #
@@ -395,6 +413,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -424,6 +443,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -431,7 +451,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +463,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -496,7 +516,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -561,10 +585,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -605,13 +626,14 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_MAPLE=y
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -675,11 +697,15 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -716,6 +742,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -807,7 +834,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -861,8 +887,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -922,7 +950,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -949,6 +976,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -958,8 +986,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -967,6 +998,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -980,7 +1012,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1012,11 +1043,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1079,5 +1112,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ecovec24-romimage_defconfig b/arch/sh/configs/ecovec24-romimage_defconfig
index 9a22c64..0774924 100644
--- a/arch/sh/configs/ecovec24-romimage_defconfig
+++ b/arch/sh/configs/ecovec24-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Tue Sep  8 13:56:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:56:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -59,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -79,15 +80,9 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-CONFIG_INITRAMFS_COMPRESSION_NONE=y
-# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -107,20 +102,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -237,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +314,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -382,6 +378,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -422,6 +419,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -530,10 +528,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -625,6 +620,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -657,9 +653,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -693,11 +686,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -717,6 +713,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -771,6 +768,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -875,6 +873,7 @@
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 # CONFIG_FSNOTIFY is not set
 # CONFIG_DNOTIFY is not set
@@ -975,6 +974,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -989,7 +989,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/ecovec24_defconfig b/arch/sh/configs/ecovec24_defconfig
index 2050a766..ac64697 100644
--- a/arch/sh/configs/ecovec24_defconfig
+++ b/arch/sh/configs/ecovec24_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc7
-# Wed Aug 26 09:09:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:45:39 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -97,20 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -232,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +315,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0, console=ttySC0,115200 root=/dev/nfs ip=dhcp mem=120M memchunk.vpu=4m"
 
 #
@@ -388,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -417,6 +420,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -424,7 +428,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -437,6 +440,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -446,9 +450,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -504,6 +508,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -666,10 +671,7 @@
 # CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -713,11 +715,15 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -771,6 +777,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -804,9 +811,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -856,11 +860,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,8 +888,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -936,8 +946,10 @@
 CONFIG_VIDEO_SH_MOBILE_CEU=y
 # CONFIG_V4L_USB_DRIVERS is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
 # CONFIG_USB_MR800 is not set
 # CONFIG_RADIO_TEA5764 is not set
 # CONFIG_DAB is not set
@@ -1003,7 +1015,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1026,6 +1037,7 @@
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1070,6 +1082,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -1161,6 +1174,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1208,6 +1223,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1265,6 +1281,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1329,7 +1346,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1409,6 +1425,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1423,7 +1440,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1446,7 +1463,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1487,11 +1503,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig
index 497414c..86c9bc0 100644
--- a/arch/sh/configs/edosk7705_defconfig
+++ b/arch/sh/configs/edosk7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:35 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,17 +39,24 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_CGROUPS is not set
@@ -70,18 +80,19 @@
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -89,6 +100,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
@@ -125,6 +140,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -165,7 +181,6 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -173,6 +188,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -250,7 +266,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,11 +338,14 @@
 # CONFIG_R3964 is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -409,6 +429,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -416,8 +437,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -425,6 +449,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -449,4 +474,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig
index 77684ed..4c0f82b 100644
--- a/arch/sh/configs/edosk7760_defconfig
+++ b/arch/sh/configs/edosk7760_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:25:55 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:57:30 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_edosk7760"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -51,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,6 +123,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -124,7 +139,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -171,6 +186,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -216,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -304,7 +321,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x02000000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0.3:/scripts/filesys ip=192.168.0.4"
 
 #
@@ -367,6 +385,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -396,6 +415,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -403,7 +423,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -416,6 +435,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -426,9 +446,9 @@
 CONFIG_MTD=y
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,10 +583,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -649,6 +666,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -659,6 +677,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH7760=y
 # CONFIG_I2C_SH_MOBILE is not set
@@ -680,20 +699,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 CONFIG_I2C_DEBUG_CORE=y
 CONFIG_I2C_DEBUG_ALGO=y
 CONFIG_I2C_DEBUG_BUS=y
 CONFIG_I2C_DEBUG_CHIP=y
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -712,8 +732,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -837,8 +859,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -900,7 +924,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -974,6 +997,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1010,18 +1034,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1029,6 +1058,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1045,11 +1075,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1064,7 +1094,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1100,11 +1129,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1168,5 +1199,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/espt_defconfig b/arch/sh/configs/espt_defconfig
index 881128e..9b78551 100644
--- a/arch/sh/configs/espt_defconfig
+++ b/arch/sh/configs/espt_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:27:21 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:58:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=bootp"
 
 #
@@ -371,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +432,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -421,9 +442,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -477,6 +498,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -554,7 +576,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -610,10 +631,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -705,11 +723,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -819,6 +841,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -888,6 +911,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -930,8 +954,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -997,7 +1023,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1071,6 +1096,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1082,11 +1108,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1096,6 +1126,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1109,7 +1140,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1141,11 +1171,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1208,5 +1240,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig
index 3249d46..f59be44 100644
--- a/arch/sh/configs/hp6xx_defconfig
+++ b/arch/sh/configs/hp6xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:12 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 17:59:45 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 CONFIG_BSD_PROCESS_ACCT=y
@@ -46,11 +55,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,18 +91,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -100,6 +111,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -107,7 +122,7 @@
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -154,6 +169,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -199,6 +215,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -288,7 +305,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -322,6 +340,7 @@
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_HIBERNATION is not set
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 # CONFIG_CPU_IDLE is not set
 # CONFIG_NET is not set
 
@@ -390,7 +409,6 @@
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -399,6 +417,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -428,13 +447,14 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 CONFIG_KEYBOARD_HP6XX=y
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -452,6 +472,7 @@
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -507,11 +528,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -663,7 +688,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -725,7 +752,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -782,6 +808,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -791,8 +818,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -800,6 +830,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -813,7 +844,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -854,11 +884,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -920,4 +952,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/kfr2r09-romimage_defconfig b/arch/sh/configs/kfr2r09-romimage_defconfig
index c0f9263..02590e1 100644
--- a/arch/sh/configs/kfr2r09-romimage_defconfig
+++ b/arch/sh/configs/kfr2r09-romimage_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:09:16 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:01:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -58,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -78,15 +79,9 @@
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_ROOT_GID=0
 CONFIG_RD_GZIP=y
 # CONFIG_RD_BZIP2 is not set
 # CONFIG_RD_LZMA is not set
-# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
-# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -106,20 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -173,6 +167,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -219,6 +214,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -301,7 +297,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 quiet"
 
 #
@@ -324,6 +321,7 @@
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -362,6 +360,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +401,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -489,6 +489,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -520,9 +521,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -556,11 +554,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -580,6 +581,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -718,6 +720,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -732,7 +735,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/kfr2r09_defconfig b/arch/sh/configs/kfr2r09_defconfig
index cef6131..8ae65d2 100644
--- a/arch/sh/configs/kfr2r09_defconfig
+++ b/arch/sh/configs/kfr2r09_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 21:58:52 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:54:22 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -60,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -102,20 +103,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -190,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -236,6 +237,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -319,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC1,115200"
 
 #
@@ -343,6 +346,7 @@
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -383,6 +387,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -423,6 +428,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -432,9 +438,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -500,7 +506,12 @@
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
 # CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_ONENAND=y
+# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
+CONFIG_MTD_ONENAND_GENERIC=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
 
 #
 # LPDDR flash memory drivers
@@ -564,11 +575,15 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
@@ -621,6 +636,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -653,9 +669,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -689,11 +702,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -713,6 +729,7 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
@@ -856,6 +873,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -941,6 +960,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1002,6 +1022,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1016,7 +1037,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig
index ba05739..c2a9a39 100644
--- a/arch/sh/configs/landisk_defconfig
+++ b/arch/sh/configs/landisk_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:28:45 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:05:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -411,6 +429,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,6 +461,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -449,7 +469,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -462,6 +481,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -631,6 +651,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
@@ -653,7 +674,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -729,6 +754,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -754,10 +780,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -868,10 +891,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -886,9 +919,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -910,6 +941,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -928,11 +960,11 @@
 CONFIG_FONT_8x16=y
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -961,6 +993,7 @@
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1011,6 +1044,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1177,8 +1211,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1251,7 +1287,6 @@
 CONFIG_UFS_FS=m
 # CONFIG_UFS_FS_WRITE is not set
 # CONFIG_UFS_DEBUG is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=m
 CONFIG_NFS_V3=y
@@ -1331,6 +1366,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1340,8 +1376,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1350,6 +1389,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1363,7 +1403,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1395,11 +1434,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1462,5 +1503,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig
index c0bc2fd..ec0c0b4 100644
--- a/arch/sh/configs/lboxre2_defconfig
+++ b/arch/sh/configs/lboxre2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:29:50 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:09:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,19 +93,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -116,7 +131,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -163,6 +178,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -208,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/sda1"
 
 #
@@ -411,6 +429,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +459,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +467,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -460,6 +479,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -572,12 +592,14 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -599,6 +621,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -627,6 +650,7 @@
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -645,7 +669,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -725,6 +753,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -750,10 +779,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -863,10 +889,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -881,9 +917,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -905,6 +939,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -923,7 +958,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1021,8 +1055,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1089,7 +1125,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1155,6 +1190,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,8 +1200,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1174,6 +1213,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1187,7 +1227,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1219,11 +1258,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1286,5 +1327,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig
index c5859e8..79091e3 100644
--- a/arch/sh/configs/magicpanelr2_defconfig
+++ b/arch/sh/configs/magicpanelr2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:30:31 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:10:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 # CONFIG_GROUP_SCHED is not set
@@ -91,18 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +323,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -368,6 +386,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -397,6 +416,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -404,7 +424,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -417,6 +436,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -428,9 +448,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -589,10 +609,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -631,13 +648,15 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -701,6 +720,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -721,11 +745,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -829,8 +856,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -900,7 +929,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -976,6 +1004,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1006,24 +1035,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1036,16 +1071,15 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1077,5 +1111,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig
index e5a21e1..6bb5976 100644
--- a/arch/sh/configs/microdev_defconfig
+++ b/arch/sh/configs/microdev_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:31:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:14:35 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -106,6 +117,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@
 CONFIG_CPU_SUBTYPE_SH4_202=y
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -211,6 +227,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/hda1"
 
 #
@@ -364,6 +382,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -393,6 +412,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -400,7 +420,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -413,6 +432,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -499,10 +519,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -561,10 +578,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -575,9 +602,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -662,8 +687,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -726,12 +753,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -803,6 +830,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -812,8 +840,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -821,6 +852,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -834,7 +866,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -875,11 +906,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -943,5 +976,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index b18cfd3..6501828 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 16:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:17:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -89,19 +99,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -111,6 +123,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +139,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -138,7 +155,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +242,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -308,7 +327,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 earlyprintk=serial ip=on root=/dev/nfs ip=dhcp"
 
 #
@@ -328,7 +348,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -376,6 +402,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -406,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -414,7 +442,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -427,6 +454,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -436,9 +464,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,7 +613,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +648,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -659,14 +683,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -715,6 +744,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -725,6 +755,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -746,15 +777,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -777,11 +810,14 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -801,8 +837,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -922,7 +960,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -952,13 +989,13 @@
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
-CONFIG_SUPERH_BUILT_IN_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
@@ -1017,6 +1054,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1064,8 +1102,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1126,7 +1166,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1161,6 +1200,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1172,11 +1212,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1188,6 +1232,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1201,7 +1246,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
 CONFIG_CRYPTO_BLKCIPHER2=y
@@ -1240,11 +1284,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1308,5 +1354,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/polaris_defconfig b/arch/sh/configs/polaris_defconfig
index 67edd3f..7fc1952 100644
--- a/arch/sh/configs/polaris_defconfig
+++ b/arch/sh/configs/polaris_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:33:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:20:53 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,18 +101,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +319,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=/dev/mtdblock2 rootfstype=jffs2 mem=63M mtdparts=physmap-flash.0:0x00100000(bootloader)ro,0x00500000(Kernel)ro,0x00A00000(Filesystem)"
 
 #
@@ -363,6 +381,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +422,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -414,9 +434,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -577,10 +597,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -666,11 +683,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -770,8 +791,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -841,7 +864,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -877,6 +899,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -916,18 +939,23 @@
 # CONFIG_DEBUG_LIST is not set
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -935,6 +963,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -947,16 +976,15 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0x00000000
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4000150
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -987,5 +1015,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig
index 107a8e3..903b021 100644
--- a/arch/sh/configs/r7780mp_defconfig
+++ b/arch/sh/configs/r7780mp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:34:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:24:31 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,20 +102,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +127,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -174,6 +191,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -229,6 +247,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -315,7 +334,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -396,6 +416,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -428,6 +449,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -436,7 +458,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -449,6 +470,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -460,9 +482,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -513,6 +535,7 @@
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_PCI is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_PLATRAM is not set
 
@@ -651,11 +674,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -677,6 +702,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -704,6 +730,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -722,7 +749,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,6 +835,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -829,10 +861,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -873,13 +902,17 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -933,6 +966,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -961,6 +995,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -987,19 +1022,26 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1049,6 +1091,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,7 +1103,6 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -1081,14 +1123,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1101,11 +1146,11 @@
 # CONFIG_DISPLAY_SUPPORT is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1169,6 +1214,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1221,8 +1267,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1289,12 +1337,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1370,6 +1418,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1404,21 +1453,27 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1427,6 +1482,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1445,11 +1501,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1464,7 +1520,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1506,11 +1561,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1573,5 +1630,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig
index 8a3dc30..27ff46c 100644
--- a/arch/sh/configs/r7785rp_defconfig
+++ b/arch/sh/configs/r7785rp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:37:20 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:29:23 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +44,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -56,12 +65,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,20 +102,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -117,6 +128,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -129,7 +145,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +194,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -231,7 +248,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -239,6 +255,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -338,7 +355,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -419,6 +437,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=m
@@ -452,6 +471,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -460,7 +480,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -473,6 +492,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -591,11 +611,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -617,6 +639,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -644,6 +667,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -662,7 +686,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -721,6 +749,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -746,10 +775,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -790,14 +816,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -851,6 +882,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -879,6 +911,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_HIGHLANDER=y
 # CONFIG_I2C_OCORES is not set
@@ -906,15 +939,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -935,14 +970,24 @@
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -993,6 +1038,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1004,9 +1050,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1026,14 +1070,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1099,11 +1146,11 @@
 # CONFIG_LOGO is not set
 CONFIG_SOUND=m
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -1167,6 +1214,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1219,8 +1267,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1286,12 +1336,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1367,6 +1417,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1401,22 +1452,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1425,6 +1483,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1442,11 +1501,11 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_4KSTACKS=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1461,7 +1520,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1503,11 +1561,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1571,5 +1631,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig
index 55c3656..c40db12 100644
--- a/arch/sh/configs/rsk7201_defconfig
+++ b/arch/sh/configs/rsk7201_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:39:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:34:29 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
@@ -45,11 +54,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -86,19 +96,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -117,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -285,7 +303,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -309,6 +328,7 @@
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 # CONFIG_NET is not set
@@ -327,9 +347,9 @@
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -498,6 +518,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -597,7 +622,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -632,7 +659,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -668,7 +694,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -686,6 +711,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -698,11 +724,15 @@
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -712,6 +742,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -741,4 +772,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
index 69e6199..5cabdb3 100644
--- a/arch/sh/configs/rsk7203_defconfig
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:40:44 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:35:04 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 # CONFIG_IKCONFIG_PROC is not set
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +103,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -124,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -172,6 +189,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -308,7 +326,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
 
 #
@@ -332,6 +351,7 @@
 #
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -373,6 +393,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +424,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +432,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,9 +453,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
@@ -591,10 +612,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -679,6 +697,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -699,6 +722,10 @@
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -741,7 +768,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -764,6 +790,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -811,6 +838,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
@@ -954,8 +982,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -990,7 +1020,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -1016,7 +1045,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1090,6 +1118,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1129,22 +1158,28 @@
 CONFIG_DEBUG_LIST=y
 CONFIG_DEBUG_SG=y
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1152,6 +1187,7 @@
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1170,10 +1206,10 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
 CONFIG_EARLY_PRINTK=y
-CONFIG_DEBUG_BOOTMEM=y
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1203,5 +1239,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig
index c6e9b1c..f521e82 100644
--- a/arch/sh/configs/rts7751r2d1_defconfig
+++ b/arch/sh/configs/rts7751r2d1_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:42:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:36:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -542,11 +564,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -568,6 +592,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -595,6 +620,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -613,7 +639,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -673,6 +703,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -694,6 +725,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -719,10 +751,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -840,10 +869,20 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -862,9 +901,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -880,12 +917,15 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -969,6 +1009,7 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1071,7 +1112,6 @@
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1094,6 +1134,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1142,6 +1183,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1213,6 +1255,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1252,6 +1295,7 @@
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1293,8 +1337,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1357,7 +1403,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1423,6 +1468,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1434,11 +1480,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1450,6 +1500,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1463,7 +1514,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1495,11 +1545,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1614,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig
index bc10469..a156cd1 100644
--- a/arch/sh/configs/rts7751r2dplus_defconfig
+++ b/arch/sh/configs/rts7751r2dplus_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:19 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:39:48 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,8 +29,10 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_IO_TRAPPED=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,20 +94,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -107,6 +119,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +322,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=serial"
 
 #
@@ -378,6 +398,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -408,6 +429,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -416,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -429,6 +450,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -438,9 +460,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,6 +521,7 @@
 # CONFIG_MTD_PMC551 is not set
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -627,11 +650,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -653,6 +678,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -680,6 +706,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -698,7 +725,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -758,6 +789,7 @@
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -779,6 +811,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,10 +837,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -925,10 +955,20 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_ADCXX is not set
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
@@ -947,9 +987,7 @@
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
 # CONFIG_SENSORS_LIS3_SPI is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -965,12 +1003,15 @@
 CONFIG_MFD_SM501=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 CONFIG_VIDEO_OUTPUT_CONTROL=m
@@ -1054,6 +1095,7 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
@@ -1156,7 +1198,6 @@
 CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1179,6 +1220,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1227,6 +1269,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1298,6 +1341,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1337,6 +1381,7 @@
 CONFIG_RTC_DRV_R9701=y
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1378,8 +1423,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1443,7 +1490,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1509,6 +1555,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1520,11 +1567,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1536,6 +1587,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1549,7 +1601,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1581,11 +1632,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1648,5 +1701,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig
index 753fb27..055536b 100644
--- a/arch/sh/configs/sdk7780_defconfig
+++ b/arch/sh/configs/sdk7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:43:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:40:25 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION="_SDK7780"
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -88,20 +98,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -110,6 +121,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -122,7 +137,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -225,6 +241,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x01800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="mem=128M console=tty0 console=ttySC0,115200 ip=bootp root=/dev/nfs nfsroot=192.168.0.1:/home/rootfs"
 
 #
@@ -435,6 +453,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -496,6 +515,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -503,7 +523,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -516,6 +535,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -677,12 +697,14 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -704,6 +726,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -732,6 +755,7 @@
 # CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -760,7 +784,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -804,10 +832,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -862,12 +887,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -875,6 +901,7 @@
 CONFIG_MOUSE_PS2_SYNAPTICS=y
 CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
 # CONFIG_MOUSE_PS2_TOUCHKIT is not set
 # CONFIG_MOUSE_SERIAL is not set
 # CONFIG_MOUSE_APPLETOUCH is not set
@@ -947,6 +974,11 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -954,7 +986,6 @@
 # CONFIG_BATTERY_DS2760 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -986,6 +1017,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1072,11 +1104,11 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1099,6 +1131,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1149,6 +1182,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
@@ -1278,6 +1312,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1345,7 +1380,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1425,6 +1459,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_UNUSED_SYMBOLS=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1461,18 +1496,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1480,6 +1520,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1495,11 +1536,11 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1514,7 +1555,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -1550,11 +1590,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1617,5 +1659,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 8dd2f13..1cd1777 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:46:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:45:28 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
@@ -53,12 +62,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -105,19 +114,21 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -126,6 +137,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -137,7 +153,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +201,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -319,7 +336,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
 
 #
@@ -389,6 +407,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -419,6 +438,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -426,7 +446,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -448,9 +467,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -588,10 +607,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -647,11 +663,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -746,8 +766,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -782,8 +804,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
@@ -809,7 +829,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -846,6 +865,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -882,20 +902,27 @@
 CONFIG_DEBUG_LIST=y
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -904,6 +931,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -920,10 +948,10 @@
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -938,7 +966,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_HASH=y
@@ -974,11 +1001,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1046,5 +1075,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig
index 18f46de..5531444 100644
--- a/arch/sh/configs/se7343_defconfig
+++ b/arch/sh/configs/se7343_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:07 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:46:55 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -88,18 +98,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -108,6 +119,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -119,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -135,7 +150,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -169,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,6 +230,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200"
 
 #
@@ -316,7 +334,12 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -360,6 +383,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -389,6 +413,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -396,7 +421,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -418,9 +442,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -560,10 +584,7 @@
 CONFIG_MII=y
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -671,6 +692,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,6 +703,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -702,20 +725,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -734,8 +758,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -788,6 +814,7 @@
 # CONFIG_LOGO is not set
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
@@ -822,7 +849,6 @@
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -845,6 +871,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -877,6 +904,7 @@
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -891,6 +919,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 CONFIG_USB_ISP116X_HCD=y
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -990,8 +1019,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1028,8 +1059,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1062,7 +1091,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1140,6 +1168,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1149,8 +1178,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1160,6 +1192,7 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1173,7 +1206,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1205,11 +1237,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1273,5 +1307,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig
index 724bb77..6921b19 100644
--- a/arch/sh/configs/se7619_defconfig
+++ b/arch/sh/configs/se7619_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:47:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:05 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,17 +40,24 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -73,31 +83,36 @@
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -144,6 +159,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -262,7 +278,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -469,11 +486,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -507,7 +528,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -559,7 +579,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -594,7 +616,6 @@
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
 # CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
@@ -619,7 +640,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -637,6 +657,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -645,8 +666,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -654,6 +678,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -680,4 +705,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig
index 6ca6a2f..3abb068 100644
--- a/arch/sh/configs/se7705_defconfig
+++ b/arch/sh/configs/se7705_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:48:18 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:50:52 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -102,6 +113,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -113,7 +128,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -160,6 +175,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -205,6 +221,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -289,7 +306,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -355,6 +373,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -384,6 +403,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -391,7 +411,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -409,9 +428,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -547,10 +566,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -642,10 +658,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -656,9 +682,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -692,7 +716,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -746,7 +769,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -815,7 +840,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -849,6 +873,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -857,8 +882,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -866,6 +894,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -878,7 +907,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -910,11 +938,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -979,5 +1009,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig
index b8aae11..1a43cfe 100644
--- a/arch/sh/configs/se7712_defconfig
+++ b/arch/sh/configs/se7712_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:49:00 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:53:32 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -84,18 +94,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
@@ -368,6 +386,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -433,6 +452,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -440,7 +460,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -464,9 +483,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -597,7 +616,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -605,6 +623,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -658,10 +677,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -719,11 +735,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -828,8 +848,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -866,8 +888,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -900,7 +920,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -935,6 +954,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -964,24 +984,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -994,14 +1020,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1016,7 +1041,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1059,11 +1083,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1127,5 +1153,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig
index 306e21c..b8a3c8c 100644
--- a/arch/sh/configs/se7721_defconfig
+++ b/arch/sh/configs/se7721_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:50:49 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:11 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -89,18 +99,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -109,6 +120,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -120,7 +135,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -167,6 +182,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -212,6 +228,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -296,7 +313,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2"
 
 #
@@ -373,6 +391,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -438,6 +457,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -445,7 +465,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +488,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -606,6 +625,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -621,10 +641,7 @@
 # CONFIG_NET_ETHERNET is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -672,12 +689,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 # CONFIG_MOUSE_PS2 is not set
 # CONFIG_MOUSE_SERIAL is not set
@@ -725,6 +743,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -762,7 +785,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -785,6 +807,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -831,6 +854,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -900,6 +924,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -961,8 +986,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -1002,8 +1029,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -1036,7 +1061,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1095,6 +1119,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1124,24 +1149,30 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1154,14 +1185,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1176,7 +1206,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1219,11 +1248,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1287,5 +1318,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig
index 6194382..d709b7f 100644
--- a/arch/sh/configs/se7722_defconfig
+++ b/arch/sh/configs/se7722_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 12:54:24 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:57:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +157,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +192,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +250,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -317,7 +335,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -336,7 +355,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -381,6 +406,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +436,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -417,7 +444,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -430,6 +456,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -494,7 +521,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -502,6 +528,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -535,10 +562,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -577,12 +601,13 @@
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -631,10 +656,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -645,9 +680,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -681,7 +714,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -778,8 +810,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -839,7 +873,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -866,6 +899,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -878,8 +912,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -889,6 +926,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -902,7 +940,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -934,11 +971,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1002,5 +1041,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7724_defconfig b/arch/sh/configs/se7724_defconfig
index 3ee783a0..56b0b9f 100644
--- a/arch/sh/configs/se7724_defconfig
+++ b/arch/sh/configs/se7724_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Mon Jun 29 16:28:43 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:50:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -42,6 +42,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,11 +60,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -91,20 +98,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -144,7 +150,7 @@
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -178,6 +184,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -249,6 +257,8 @@
 #
 CONFIG_SOLUTION_ENGINE=y
 CONFIG_SH_7724_SOLUTION_ENGINE=y
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -269,7 +279,10 @@
 #
 # DMA support
 #
-# CONFIG_SH_DMA is not set
+CONFIG_SH_DMA_API=y
+CONFIG_SH_DMA=y
+CONFIG_NR_ONCHIP_DMA_CHANNELS=12
+# CONFIG_NR_DMA_CHANNELS_BOOL is not set
 
 #
 # Companion Chips
@@ -305,7 +318,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=tty1 console=ttySC3,115200 root=/dev/nfs ip=dhcp memchunk.vpu=4m"
 
 #
@@ -325,7 +339,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -373,6 +393,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -402,6 +423,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -409,7 +431,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +443,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +453,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -489,6 +511,7 @@
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -648,12 +671,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -697,14 +718,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_SH_KEYSC=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -754,6 +780,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -764,6 +791,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
@@ -786,9 +814,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -838,11 +863,15 @@
 #
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -862,8 +891,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
@@ -876,24 +907,24 @@
 CONFIG_VIDEO_V4L2_COMMON=y
 # CONFIG_VIDEO_ALLOW_V4L1 is not set
 CONFIG_VIDEO_V4L1_COMPAT=y
-# CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER=m
 # CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=y
-CONFIG_MEDIA_TUNER_TDA8290=y
-CONFIG_MEDIA_TUNER_TDA9887=y
-CONFIG_MEDIA_TUNER_TEA5761=y
-CONFIG_MEDIA_TUNER_TEA5767=y
-CONFIG_MEDIA_TUNER_MT20XX=y
-CONFIG_MEDIA_TUNER_XC2028=y
-CONFIG_MEDIA_TUNER_XC5000=y
-CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
 CONFIG_VIDEO_V4L2=y
 CONFIG_VIDEOBUF_GEN=y
 CONFIG_VIDEOBUF_DMA_CONTIG=y
@@ -904,6 +935,7 @@
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_VIDEO_AU0828 is not set
 CONFIG_SOC_CAMERA=y
 # CONFIG_SOC_CAMERA_MT9M001 is not set
 # CONFIG_SOC_CAMERA_MT9M111 is not set
@@ -919,15 +951,18 @@
 CONFIG_USB_GSPCA=m
 # CONFIG_USB_M5602 is not set
 # CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GL860 is not set
 # CONFIG_USB_GSPCA_CONEX is not set
 # CONFIG_USB_GSPCA_ETOMS is not set
 # CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_JEILINJ is not set
 # CONFIG_USB_GSPCA_MARS is not set
 # CONFIG_USB_GSPCA_MR97310A is not set
 # CONFIG_USB_GSPCA_OV519 is not set
 # CONFIG_USB_GSPCA_OV534 is not set
 # CONFIG_USB_GSPCA_PAC207 is not set
 # CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SN9C20X is not set
 # CONFIG_USB_GSPCA_SONIXB is not set
 # CONFIG_USB_GSPCA_SONIXJ is not set
 # CONFIG_USB_GSPCA_SPCA500 is not set
@@ -957,6 +992,26 @@
 # CONFIG_USB_STKWEBCAM is not set
 # CONFIG_USB_S2255 is not set
 # CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DVB_MAX_ADAPTERS=8
+# CONFIG_DVB_DYNAMIC_MINORS is not set
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+# CONFIG_DVB_USB is not set
+# CONFIG_SMS_SIANO_MDTV is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
 # CONFIG_DAB is not set
 
 #
@@ -1017,10 +1072,80 @@
 # CONFIG_LOGO_SUPERH_MONO is not set
 # CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_LOGO_SUPERH_CLUT224=y
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+
+#
+# SoC Audio support for SuperH
+#
+CONFIG_SND_SOC_SH4_FSI=m
+CONFIG_SND_FSI_AK4642=y
+CONFIG_SND_SOC_I2C_AND_SPI=m
+CONFIG_SND_SOC_ALL_CODECS=m
+CONFIG_SND_SOC_WM_HUBS=m
+CONFIG_SND_SOC_AD1836=m
+CONFIG_SND_SOC_AD1938=m
+CONFIG_SND_SOC_AD73311=m
+CONFIG_SND_SOC_AK4104=m
+CONFIG_SND_SOC_AK4535=m
+CONFIG_SND_SOC_AK4642=m
+CONFIG_SND_SOC_CS4270=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_PCM3008=m
+CONFIG_SND_SOC_SPDIF=m
+CONFIG_SND_SOC_SSM2602=m
+CONFIG_SND_SOC_TLV320AIC23=m
+CONFIG_SND_SOC_TLV320AIC26=m
+CONFIG_SND_SOC_TLV320AIC3X=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_UDA1380=m
+CONFIG_SND_SOC_WM8510=m
+CONFIG_SND_SOC_WM8523=m
+CONFIG_SND_SOC_WM8580=m
+CONFIG_SND_SOC_WM8728=m
+CONFIG_SND_SOC_WM8731=m
+CONFIG_SND_SOC_WM8750=m
+CONFIG_SND_SOC_WM8753=m
+CONFIG_SND_SOC_WM8776=m
+CONFIG_SND_SOC_WM8900=m
+CONFIG_SND_SOC_WM8903=m
+CONFIG_SND_SOC_WM8940=m
+CONFIG_SND_SOC_WM8960=m
+CONFIG_SND_SOC_WM8961=m
+CONFIG_SND_SOC_WM8971=m
+CONFIG_SND_SOC_WM8974=m
+CONFIG_SND_SOC_WM8988=m
+CONFIG_SND_SOC_WM8990=m
+CONFIG_SND_SOC_WM8993=m
+CONFIG_SND_SOC_WM9081=m
+CONFIG_SND_SOC_MAX9877=m
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1043,6 +1168,7 @@
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 # CONFIG_HID_LOGITECH is not set
 # CONFIG_HID_MICROSOFT is not set
@@ -1072,6 +1198,7 @@
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -1086,9 +1213,11 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
 # CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
@@ -1151,9 +1280,46 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+CONFIG_USB_GADGET_R8A66597=y
+CONFIG_USB_R8A66597=y
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
 
 #
 # OTG and related infrastructure
@@ -1176,6 +1342,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
@@ -1223,6 +1391,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1279,6 +1448,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1343,7 +1513,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1423,6 +1592,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1433,8 +1603,11 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1442,6 +1615,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1455,7 +1629,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1496,11 +1669,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1562,5 +1737,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig
index 564bf7b..7bc926c 100644
--- a/arch/sh/configs/se7750_defconfig
+++ b/arch/sh/configs/se7750_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:00:01 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 18:58:58 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -84,18 +94,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -104,6 +115,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -291,7 +308,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -358,6 +376,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -387,6 +406,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -394,7 +414,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -412,9 +431,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -563,7 +582,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -599,10 +617,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -665,10 +680,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -679,9 +704,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -766,8 +789,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -838,7 +863,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -885,6 +909,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -894,8 +919,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -903,6 +931,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -916,7 +945,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -948,11 +976,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1016,5 +1046,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig
index eb431c4..c20ae5e 100644
--- a/arch/sh/configs/se7751_defconfig
+++ b/arch/sh/configs/se7751_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:02:26 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:01:41 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +133,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +180,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +226,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -295,7 +312,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400"
 
 #
@@ -382,6 +400,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,6 +430,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -418,7 +438,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,9 +455,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -574,10 +593,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -632,10 +648,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -646,9 +672,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -734,8 +758,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -806,7 +832,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -833,6 +858,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -842,8 +868,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -851,6 +880,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -864,7 +894,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -896,11 +925,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -965,5 +996,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig
index 756beec..82baeef 100644
--- a/arch/sh/configs/se7780_defconfig
+++ b/arch/sh/configs/se7780_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:03:56 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:03:59 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -81,19 +91,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -101,6 +112,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -112,7 +128,8 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -159,6 +176,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 CONFIG_CPU_SUBTYPE_SH7780=y
@@ -199,7 +217,6 @@
 CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -207,6 +224,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -287,8 +305,9 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00810000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1"
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
+CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1"
 
 #
 # Bus options
@@ -382,6 +401,7 @@
 # CONFIG_BT is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -389,7 +409,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -406,9 +425,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -549,6 +568,7 @@
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
 # CONFIG_SCSI_SAS_LIBSAS is not set
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
@@ -587,11 +607,13 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +634,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD64X is not set
 # CONFIG_PATA_CS5520 is not set
@@ -630,6 +653,7 @@
 # CONFIG_PATA_NS87410 is not set
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -648,8 +672,13 @@
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
@@ -724,10 +753,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -821,10 +847,19 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_IT87 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
@@ -833,7 +868,6 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 CONFIG_THERMAL=y
 # CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
@@ -857,6 +891,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -937,11 +972,11 @@
 CONFIG_LOGO_SUPERH_CLUT224=y
 CONFIG_SOUND=y
 CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 # CONFIG_SND is not set
 CONFIG_SOUND_PRIME=y
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -964,6 +999,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1009,6 +1045,7 @@
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1243,6 +1280,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1253,8 +1291,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1263,6 +1304,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1276,7 +1318,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_NULL is not set
@@ -1309,6 +1350,7 @@
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1371,5 +1413,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 7fedaae..dd0e890 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:04:41 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:07:14 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +62,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -91,20 +101,22 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -126,7 +143,7 @@
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -218,6 +236,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -302,7 +321,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 
 #
@@ -382,6 +402,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -419,7 +441,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -432,6 +453,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 # CONFIG_STANDALONE is not set
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
@@ -591,6 +613,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -603,7 +626,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -679,6 +706,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -704,10 +732,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -804,10 +829,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -822,9 +857,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -861,6 +894,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -879,7 +913,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -944,8 +977,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1011,12 +1046,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1108,6 +1143,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1119,11 +1155,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1134,6 +1174,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_EARLY_PRINTK is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1147,7 +1188,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1189,11 +1229,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1259,5 +1301,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig
index c296ca5..662156e 100644
--- a/arch/sh/configs/sh7710voipgw_defconfig
+++ b/arch/sh/configs/sh7710voipgw_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:13 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:11:49 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -49,11 +58,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -87,18 +97,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -107,6 +118,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +134,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -165,6 +181,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,6 +227,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -292,7 +310,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +393,7 @@
 # CONFIG_IP_NF_ARPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -440,6 +460,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -447,7 +468,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -469,9 +489,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -605,10 +625,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -686,6 +703,11 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
@@ -723,7 +745,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 # CONFIG_HID_PID is not set
 
@@ -775,8 +796,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -813,8 +836,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
@@ -847,7 +868,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -874,6 +894,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -883,8 +904,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -893,6 +917,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -906,7 +931,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -938,11 +962,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1006,5 +1032,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7724_generic_defconfig b/arch/sh/configs/sh7724_generic_defconfig
index ba26be1..e06719a 100644
--- a/arch/sh/configs/sh7724_generic_defconfig
+++ b/arch/sh/configs/sh7724_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:06:48 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:14:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -46,14 +55,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -92,19 +99,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -113,13 +122,18 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -169,6 +183,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 CONFIG_CPU_SUBTYPE_SH7724=y
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +229,6 @@
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +236,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -246,6 +261,8 @@
 # Board support
 #
 # CONFIG_SH_7724_SOLUTION_ENGINE is not set
+# CONFIG_SH_KFR2R09 is not set
+# CONFIG_SH_ECOVEC is not set
 
 #
 # Timer and clock configuration
@@ -318,7 +335,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -345,6 +363,7 @@
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+CONFIG_PM_RUNTIME=y
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -427,6 +446,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -437,6 +457,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -456,20 +477,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -488,8 +510,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -540,6 +564,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -587,7 +612,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -642,6 +669,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -654,11 +682,15 @@
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -668,6 +700,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -692,4 +725,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig
index b1d9b23..194ff70 100644
--- a/arch/sh/configs/sh7763rdp_defconfig
+++ b/arch/sh/configs/sh7763rdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:07:15 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:15:37 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -48,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -92,19 +102,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -114,6 +126,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +142,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -173,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 CONFIG_CPU_SUBTYPE_SH7763=y
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -214,7 +232,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -222,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -303,7 +321,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10"
 
 #
@@ -371,6 +390,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -401,6 +421,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -409,7 +430,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -422,6 +442,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -431,9 +452,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AR7_PARTS is not set
@@ -488,6 +509,7 @@
 CONFIG_MTD_COMPLEX_MAPPINGS=y
 CONFIG_MTD_PHYSMAP=y
 # CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_GPIO_ADDR is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -565,7 +587,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -621,10 +642,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -716,11 +734,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -830,6 +852,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -899,6 +922,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -923,6 +947,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -956,8 +982,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1022,7 +1050,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1096,6 +1123,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1107,11 +1135,15 @@
 # CONFIG_LATENCYTOP is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -1121,6 +1153,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1134,7 +1167,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1166,11 +1198,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1232,5 +1266,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7770_generic_defconfig b/arch/sh/configs/sh7770_generic_defconfig
index 426a88f..34bed55 100644
--- a/arch/sh/configs/sh7770_generic_defconfig
+++ b/arch/sh/configs/sh7770_generic_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:05 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:17:16 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -37,6 +40,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -45,14 +54,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_GROUP_SCHED=y
@@ -91,19 +98,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -112,13 +121,18 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -166,6 +180,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 CONFIG_CPU_SUBTYPE_SH7770=y
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -210,7 +225,6 @@
 #
 # Memory hotplug is currently incompatible with Software Suspend
 #
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -218,6 +232,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -313,7 +328,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -338,6 +354,7 @@
 CONFIG_HIBERNATION_NVS=y
 CONFIG_HIBERNATION=y
 CONFIG_PM_STD_PARTITION=""
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_CPU_IDLE_GOV_MENU=y
@@ -420,6 +437,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -430,6 +448,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_SH_MOBILE=y
 # CONFIG_I2C_SIMTEC is not set
@@ -449,20 +468,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -481,8 +501,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -533,6 +555,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -580,7 +603,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -635,6 +660,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -647,11 +673,15 @@
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
@@ -661,6 +691,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -685,4 +716,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_32bit_defconfig b/arch/sh/configs/sh7785lcr_32bit_defconfig
index ed316f6..51cbaed 100644
--- a/arch/sh/configs/sh7785lcr_32bit_defconfig
+++ b/arch/sh/configs/sh7785lcr_32bit_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:08:29 2009
+# Linux kernel version: 2.6.31
+# Fri Sep 25 11:39:20 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,10 +43,17 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
@@ -53,11 +62,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -67,8 +77,7 @@
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -79,7 +88,7 @@
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
@@ -93,28 +102,37 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+CONFIG_PERF_COUNTERS=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
-# CONFIG_OPROFILE is not set
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+CONFIG_GCOV_KERNEL=y
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +145,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +194,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +234,12 @@
 # CONFIG_PAGE_SIZE_8KB is not set
 # CONFIG_PAGE_SIZE_16KB is not set
 # CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_HUGETLB_PAGE_SIZE_64K=y
+# CONFIG_HUGETLB_PAGE_SIZE_256K is not set
+# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_4MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_64MB is not set
+# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_FLATMEM_MANUAL is not set
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -223,7 +248,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -231,6 +255,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -256,6 +281,7 @@
 #
 # CONFIG_SH_HIGHLANDER is not set
 CONFIG_SH_SH7785LCR=y
+# CONFIG_SH_SH7785LCR_PT is not set
 
 #
 # Timer and clock configuration
@@ -264,14 +290,29 @@
 CONFIG_SH_PCLK_FREQ=50000000
 CONFIG_SH_CLK_CPG=y
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 
 #
 # CPU Frequency scaling
 #
-# CONFIG_CPU_FREQ is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
 
 #
 # DMA support
@@ -299,12 +340,12 @@
 CONFIG_SCHED_HRTICK=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
-# CONFIG_SECCOMP is not set
+CONFIG_SECCOMP=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_GUSA=y
-# CONFIG_SPARSE_IRQ is not set
+CONFIG_SPARSE_IRQ=y
 
 #
 # Boot options
@@ -312,7 +353,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -321,8 +363,7 @@
 CONFIG_SH_PCIDMA_NONCOHERENT=y
 # CONFIG_PCIEPORTBUS is not set
 # CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCI_LEGACY=y
-# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
@@ -339,8 +380,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
-# CONFIG_CPU_IDLE is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 CONFIG_NET=y
 
 #
@@ -392,6 +438,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -414,6 +461,8 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -421,6 +470,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -429,7 +479,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -442,18 +491,17 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -538,7 +586,8 @@
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
@@ -561,7 +610,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
@@ -591,6 +640,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -612,6 +662,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -639,6 +690,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -657,7 +709,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -690,6 +746,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -697,12 +754,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
+# CONFIG_WLAN is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -739,25 +791,42 @@
 # Userland interfaces
 #
 CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
 
 #
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
-# CONFIG_INPUT_MOUSE is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -766,7 +835,12 @@
 #
 # Hardware I/O ports
 #
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_I8042=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -777,7 +851,7 @@
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_DEVKMEM=y
+# CONFIG_DEVKMEM is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 # CONFIG_NOZOMI is not set
 
@@ -796,12 +870,10 @@
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -809,6 +881,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -838,6 +911,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -864,21 +938,42 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_ALIM7101_WDT is not set
+CONFIG_SH_WDT=y
+# CONFIG_SH_WDT_MMAP is not set
+
+#
+# PCI-based Watchdog Cards
+#
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -896,14 +991,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGA_ARB is not set
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -915,12 +1013,11 @@
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
-CONFIG_FB_SYS_FILLRECT=m
-CONFIG_FB_SYS_COPYAREA=m
-CONFIG_FB_SYS_IMAGEBLIT=m
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
 # CONFIG_FB_FOREIGN_ENDIAN is not set
-CONFIG_FB_SYS_FOPS=m
-CONFIG_FB_DEFERRED_IO=y
+# CONFIG_FB_SYS_FOPS is not set
 # CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
@@ -955,7 +1052,7 @@
 # CONFIG_FB_ARK is not set
 # CONFIG_FB_PM3 is not set
 # CONFIG_FB_CARMINE is not set
-CONFIG_FB_SH_MOBILE_LCDC=m
+# CONFIG_FB_SH_MOBILE_LCDC is not set
 CONFIG_FB_SM501=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
@@ -981,14 +1078,112 @@
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
-# CONFIG_LOGO_SUPERH_CLUT224 is not set
-# CONFIG_SOUND is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+CONFIG_LOGO_SUPERH_MONO=y
+CONFIG_LOGO_SUPERH_VGA16=y
+CONFIG_LOGO_SUPERH_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=y
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+CONFIG_SND_DYNAMIC_MINORS=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=y
+CONFIG_SND_OPL3_LIB_SEQ=y
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_MPU401_UART=y
+CONFIG_SND_OPL3_LIB=y
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_PCI=y
+# CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CA0106 is not set
+CONFIG_SND_CMIPCI=y
+# CONFIG_SND_OXYGEN is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CTXFI is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_HDA_INTEL is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_HIFIER is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VIRTUOSO is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_YMFPCI is not set
+# CONFIG_SND_SUPERH is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1001,34 +1196,39 @@
 #
 # Special HID drivers
 #
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-# CONFIG_HID_DRAGONRISE is not set
-CONFIG_HID_EZKEY=y
-# CONFIG_HID_KYE is not set
-CONFIG_HID_GYRATION=y
-# CONFIG_HID_KENSINGTON is not set
-CONFIG_HID_LOGITECH=y
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+CONFIG_HID_DRAGONRISE=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+CONFIG_HID_KYE=m
+CONFIG_HID_GYRATION=m
+CONFIG_HID_TWINHAN=m
+CONFIG_HID_KENSINGTON=m
+CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+CONFIG_HID_NTRIG=m
+CONFIG_HID_PANTHERLORD=m
 # CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_HID_GREENASIA is not set
-# CONFIG_HID_SMARTJOYPLUS is not set
-# CONFIG_HID_TOPSEED is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+CONFIG_HID_GREENASIA=m
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=m
+# CONFIG_SMARTJOYPLUS_FF is not set
+CONFIG_HID_TOPSEED=m
 # CONFIG_HID_THRUSTMASTER is not set
-# CONFIG_HID_ZEROPLUS is not set
+CONFIG_HID_ZEROPLUS=m
+# CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1040,13 +1240,14 @@
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
+# CONFIG_USB_MON is not set
 # CONFIG_USB_WUSB is not set
 # CONFIG_USB_WUSB_CBAF is not set
 
@@ -1061,10 +1262,8 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=m
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_UHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
@@ -1133,7 +1332,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-CONFIG_USB_TEST=m
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -1143,7 +1342,29 @@
 #
 # CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=m
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_TIFM_SD is not set
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1179,6 +1400,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1203,9 +1425,20 @@
 #
 # CONFIG_RTC_DRV_SH is not set
 # CONFIG_RTC_DRV_GENERIC is not set
-# CONFIG_DMADEVICES is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_UIO is not set
+CONFIG_UIO=m
+# CONFIG_UIO_CIF is not set
+# CONFIG_UIO_PDRV is not set
+# CONFIG_UIO_PDRV_GENIRQ is not set
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_AEC is not set
+# CONFIG_UIO_SERCOS3 is not set
+# CONFIG_UIO_PCI_GENERIC is not set
 
 #
 # TI VLYNQ
@@ -1225,13 +1458,15 @@
 # CONFIG_EXT3_FS_SECURITY is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1275,9 +1510,9 @@
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLBFS is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_CONFIGFS_FS=y
 CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
@@ -1297,20 +1532,20 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
-CONFIG_NFSD_V4=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
+CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
@@ -1373,85 +1608,69 @@
 # Kernel hacking
 #
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_DEBUG_KERNEL is not set
 CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
-# CONFIG_RCU_TORTURE_TEST is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
+CONFIG_LATENCYTOP=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_TRACER_MAX_TRACE=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_GENERIC_TRACER=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
+CONFIG_FUNCTION_TRACER=y
+CONFIG_FUNCTION_GRAPH_TRACER=y
+CONFIG_IRQSOFF_TRACER=y
 # CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+CONFIG_SCHED_TRACER=y
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
 # CONFIG_PROFILE_ALL_BRANCHES is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_STACK_TRACER=y
+CONFIG_KMEMTRACE=y
+CONFIG_WORKQUEUE_TRACER=y
 # CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_DYNAMIC_FTRACE=y
+# CONFIG_FUNCTION_PROFILER is not set
+CONFIG_FTRACE_MCOUNT_RECORD=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_4KSTACKS is not set
-# CONFIG_DUMP_CODE is not set
-# CONFIG_SH_NO_BSS_INIT is not set
+CONFIG_DWARF_UNWINDER=y
+CONFIG_MCOUNT=y
 
 #
 # Security options
@@ -1465,7 +1684,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1507,11 +1725,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1556,7 +1776,7 @@
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-# CONFIG_BINARY_PRINTF is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1573,5 +1793,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig
index 004e6f5..8c2c47e 100644
--- a/arch/sh/configs/sh7785lcr_defconfig
+++ b/arch/sh/configs/sh7785lcr_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:09:34 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:23:18 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,8 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
-CONFIG_IO_TRAPPED=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -41,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -53,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -93,19 +102,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -115,6 +125,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -127,7 +141,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -224,6 +239,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -306,7 +322,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -386,6 +403,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +433,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -423,7 +442,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -436,6 +454,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -445,9 +464,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -585,6 +604,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 # CONFIG_SATA_SIL24 is not set
@@ -606,6 +626,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -633,6 +654,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -651,7 +673,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -684,6 +710,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -691,10 +718,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -744,13 +768,17 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -803,6 +831,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -832,6 +861,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -858,20 +888,21 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -890,14 +921,17 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -982,7 +1016,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1005,6 +1038,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1055,6 +1089,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=m
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1173,6 +1208,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1224,8 +1260,10 @@
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1291,12 +1329,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -1372,6 +1410,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1407,18 +1446,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
@@ -1426,6 +1470,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1440,11 +1485,11 @@
 # CONFIG_KGDB is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1459,7 +1504,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1501,11 +1545,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1567,5 +1613,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig
index ad7d609..92115e6 100644
--- a/arch/sh/configs/shmin_defconfig
+++ b/arch/sh/configs/shmin_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:10:33 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:27:17 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -13,6 +13,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -26,7 +27,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -36,6 +39,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 # CONFIG_SWAP is not set
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
@@ -46,11 +55,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -77,18 +87,19 @@
 CONFIG_EVENTFD=y
 # CONFIG_SHMEM is not set
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -96,12 +107,16 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -148,6 +163,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -193,6 +209,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -274,7 +291,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00210000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 "
 
 #
@@ -339,6 +357,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -368,6 +387,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -375,7 +395,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -529,10 +548,7 @@
 # CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_NETDEV_10000=y
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -591,11 +607,15 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -672,7 +692,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -709,8 +731,6 @@
 CONFIG_PROC_SYSCTL=y
 CONFIG_PROC_PAGE_MONITOR=y
 # CONFIG_SYSFS is not set
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLBFS is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_MISC_FILESYSTEMS=y
@@ -732,7 +752,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -768,6 +787,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
@@ -775,8 +795,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -785,6 +808,7 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -797,7 +821,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -828,11 +851,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -895,5 +920,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig
index 207b0c9..e3858d7 100644
--- a/arch/sh/configs/shx3_defconfig
+++ b/arch/sh/configs/shx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:11:03 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:29:26 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -30,7 +31,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -55,12 +64,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
-# CONFIG_TREE_RCU is not set
-CONFIG_PREEMPT_RCU=y
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
 CONFIG_RCU_TRACE=y
-# CONFIG_TREE_RCU_TRACE is not set
-CONFIG_PREEMPT_RCU_TRACE=y
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+CONFIG_TREE_RCU_TRACE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,19 +120,21 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_EVENT_PROFILE=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 # CONFIG_SLUB is not set
 CONFIG_SLOB=y
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -135,6 +146,11 @@
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
@@ -147,7 +163,7 @@
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -196,6 +212,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -256,6 +273,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -353,7 +371,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00010000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00010000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel"
 
 #
@@ -438,6 +457,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -489,6 +509,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -562,7 +583,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -570,6 +590,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -602,12 +623,10 @@
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -675,6 +694,7 @@
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=m
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -685,6 +705,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -706,9 +727,6 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -729,11 +747,15 @@
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -762,8 +784,12 @@
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
@@ -808,6 +834,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=m
 # CONFIG_USB_HWA_HCD is not set
@@ -862,6 +889,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -876,10 +904,11 @@
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -939,6 +968,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -950,6 +980,7 @@
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1002,8 +1033,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1063,7 +1096,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -1129,6 +1161,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1164,22 +1197,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_RING_BUFFER=y
 CONFIG_EVENT_TRACING=y
 CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
@@ -1188,6 +1228,7 @@
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1205,10 +1246,10 @@
 CONFIG_SH_STANDARD_BIOS=y
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-CONFIG_DEBUG_STACKOVERFLOW=y
+# CONFIG_STACK_DEBUG is not set
 CONFIG_DEBUG_STACK_USAGE=y
 CONFIG_DUMP_CODE=y
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1223,7 +1264,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1255,11 +1295,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1322,5 +1364,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig
index 2be2d75..cb919a0 100644
--- a/arch/sh/configs/snapgear_defconfig
+++ b/arch/sh/configs/snapgear_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc6
-# Thu Aug 20 15:03:04 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:33:00 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -57,11 +57,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -95,21 +96,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
-CONFIG_HAVE_PERF_COUNTERS=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
 # CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
@@ -175,6 +175,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -220,6 +221,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -312,7 +314,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -374,6 +377,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -403,6 +407,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
@@ -410,7 +415,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -618,10 +622,7 @@
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -714,7 +715,6 @@
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -736,6 +736,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -818,6 +819,7 @@
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -882,7 +884,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 # CONFIG_NFS_FS is not set
 # CONFIG_NFSD is not set
@@ -909,6 +910,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -922,7 +924,7 @@
 CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig
index 5d97026..b9fe960 100644
--- a/arch/sh/configs/systemh_defconfig
+++ b/arch/sh/configs/systemh_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:35:03 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -27,7 +28,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 # CONFIG_SYSVIPC is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
@@ -45,11 +54,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -83,18 +93,19 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -103,6 +114,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -115,7 +130,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -162,6 +177,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -207,6 +223,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -294,7 +311,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -402,10 +420,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -416,9 +444,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -495,7 +521,9 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -559,7 +587,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -577,6 +604,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -586,8 +614,11 @@
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -595,6 +626,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -623,4 +655,5 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig
index 7ad080e..2ca79ed 100644
--- a/arch/sh/configs/titan_defconfig
+++ b/arch/sh/configs/titan_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:12:54 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:36:36 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -28,7 +29,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -38,6 +41,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -50,11 +59,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
@@ -90,19 +100,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_IOREMAP_PROT=y
@@ -111,6 +122,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -123,7 +138,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -170,6 +185,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -215,6 +231,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -307,7 +324,8 @@
 CONFIG_BOOT_LINK_OFFSET=0x009e0000
 CONFIG_ENTRY_OFFSET=0x00001000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
 
 #
@@ -509,6 +527,7 @@
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 CONFIG_STP=y
@@ -595,6 +614,7 @@
 CONFIG_FIB_RULES=y
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -603,7 +623,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -616,6 +635,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -628,9 +648,9 @@
 CONFIG_MTD=m
 CONFIG_MTD_DEBUG=y
 CONFIG_MTD_DEBUG_VERBOSE=0
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 # CONFIG_MTD_PARTITIONS is not set
-# CONFIG_MTD_TESTS is not set
 
 #
 # User Modules And Translation Layers
@@ -820,6 +840,7 @@
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_PMCRAID is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
@@ -832,7 +853,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -931,6 +956,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -956,10 +982,7 @@
 # CONFIG_SFC is not set
 # CONFIG_BE2NET is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -1087,10 +1110,20 @@
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_I5K_AMB is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
@@ -1105,9 +1138,7 @@
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -1149,6 +1180,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1167,7 +1199,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1217,6 +1248,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1416,8 +1448,10 @@
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1489,7 +1523,6 @@
 CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1591,6 +1624,7 @@
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1621,23 +1655,29 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_FRAME_POINTER is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_FTRACE_SYSCALLS is not set
 # CONFIG_BOOT_TRACER is not set
 CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
@@ -1650,14 +1690,13 @@
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-# CONFIG_KMEMCHECK is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1672,7 +1711,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD=y
@@ -1715,11 +1753,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+# CONFIG_CRYPTO_GHASH is not set
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1790,5 +1830,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig
index 608fe56..b012ca7 100644
--- a/arch/sh/configs/ul2_defconfig
+++ b/arch/sh/configs/ul2_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:14:36 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:42:33 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,6 +14,7 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 # CONFIG_GENERIC_GPIO is not set
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
@@ -29,7 +30,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -40,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -52,11 +61,12 @@
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,19 +101,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-# CONFIG_MARKERS is not set
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -113,6 +124,10 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -125,7 +140,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -141,7 +156,7 @@
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-# CONFIG_FREEZER is not set
+CONFIG_FREEZER=y
 
 #
 # System type
@@ -176,6 +191,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -233,6 +249,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -314,7 +331,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_OVERWRITE=y
+# CONFIG_CMDLINE_EXTEND is not set
 CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/nfs ip=dhcp"
 
 #
@@ -334,7 +352,13 @@
 #
 # Power management options (EXPERIMENTAL)
 #
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_HIBERNATION is not set
+CONFIG_PM_RUNTIME=y
 # CONFIG_CPU_IDLE is not set
 CONFIG_NET=y
 
@@ -382,6 +406,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -411,19 +436,17 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
 # CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
-CONFIG_MAC80211_DEFAULT_PS=y
-CONFIG_MAC80211_DEFAULT_PS_VALUE=1
-
-#
-# Rate control algorithm selection
-#
 CONFIG_MAC80211_RC_PID=y
 # CONFIG_MAC80211_RC_MINSTREL is not set
 CONFIG_MAC80211_RC_DEFAULT_PID=y
@@ -444,6 +467,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -453,9 +477,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -590,7 +614,6 @@
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_LIBFC is not set
 # CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
@@ -598,6 +621,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 CONFIG_ATA_SFF=y
 # CONFIG_SATA_MV is not set
@@ -631,10 +655,7 @@
 # CONFIG_KS8842 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
@@ -648,12 +669,13 @@
 # CONFIG_RTL8187 is not set
 # CONFIG_MAC80211_HWSIM is not set
 # CONFIG_P54_COMMON is not set
-# CONFIG_AR9170_USB is not set
+# CONFIG_ATH_COMMON is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
 # CONFIG_IWM is not set
 
 #
@@ -750,10 +772,20 @@
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
 # CONFIG_SENSORS_IT87 is not set
@@ -764,9 +796,7 @@
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -813,6 +843,7 @@
 # CONFIG_USB_DEVICEFS is not set
 CONFIG_USB_DEVICE_CLASS=y
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
@@ -827,9 +858,9 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 CONFIG_USB_R8A66597_HCD=y
-# CONFIG_SUPERH_ON_CHIP_R8A66597 is not set
 # CONFIG_USB_HWA_HCD is not set
 
 #
@@ -893,6 +924,7 @@
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 # CONFIG_USB_GADGET is not set
@@ -917,6 +949,8 @@
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -949,8 +983,10 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1014,7 +1050,6 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
@@ -1091,6 +1126,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1103,8 +1139,11 @@
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DMA_API_DEBUG is not set
@@ -1112,6 +1151,7 @@
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
+# CONFIG_DWARF_UNWINDER is not set
 
 #
 # Security options
@@ -1125,7 +1165,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1167,11 +1206,13 @@
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 CONFIG_CRYPTO_MICHAEL_MIC=y
@@ -1235,5 +1276,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig
index ee1987e..9f8aee5 100644
--- a/arch/sh/configs/urquell_defconfig
+++ b/arch/sh/configs/urquell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30
-# Thu Jun 18 13:15:28 2009
+# Linux kernel version: 2.6.31
+# Thu Sep 24 19:46:13 2009
 #
 CONFIG_SUPERH=y
 CONFIG_SUPERH32=y
@@ -14,11 +14,13 @@
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 # CONFIG_ARCH_SUSPEND_POSSIBLE is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_SYS_SUPPORTS_SMP=y
 CONFIG_SYS_SUPPORTS_NUMA=y
 CONFIG_SYS_SUPPORTS_PCI=y
 CONFIG_SYS_SUPPORTS_TMU=y
@@ -29,7 +31,9 @@
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_NO_VIRT_TO_BUS=y
 CONFIG_ARCH_HAS_DEFAULT_IDLE=y
+CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,6 +43,12 @@
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -54,14 +64,12 @@
 #
 # RCU Subsystem
 #
-# CONFIG_CLASSIC_RCU is not set
 CONFIG_TREE_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -111,20 +119,20 @@
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
-CONFIG_MARKERS=y
 # CONFIG_OPROFILE is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
@@ -134,6 +142,11 @@
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
 CONFIG_HAVE_DMA_API_DEBUG=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -195,6 +208,7 @@
 # CONFIG_CPU_SUBTYPE_SH4_202 is not set
 # CONFIG_CPU_SUBTYPE_SH7723 is not set
 # CONFIG_CPU_SUBTYPE_SH7724 is not set
+# CONFIG_CPU_SUBTYPE_SH7757 is not set
 # CONFIG_CPU_SUBTYPE_SH7763 is not set
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -244,7 +258,6 @@
 CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_STATIC=y
 # CONFIG_MEMORY_HOTPLUG is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
 # CONFIG_PHYS_ADDR_T_64BIT is not set
@@ -252,6 +265,7 @@
 CONFIG_NR_QUICK=2
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 
 #
@@ -322,6 +336,7 @@
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_SECCOMP=y
+# CONFIG_SMP is not set
 CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
@@ -334,7 +349,8 @@
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 CONFIG_ENTRY_OFFSET=0x00001000
-# CONFIG_CMDLINE_BOOL is not set
+# CONFIG_CMDLINE_OVERWRITE is not set
+# CONFIG_CMDLINE_EXTEND is not set
 
 #
 # Bus options
@@ -343,6 +359,8 @@
 # CONFIG_SH_PCIDMA_NONCOHERENT is not set
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 CONFIG_PCIEASPM=y
 CONFIG_PCIEASPM_DEBUG=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
@@ -367,6 +385,7 @@
 CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_HIBERNATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_CPU_IDLE=y
 CONFIG_CPU_IDLE_GOV_LADDER=y
 CONFIG_NET=y
@@ -420,6 +439,7 @@
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -442,7 +462,6 @@
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
-# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
@@ -450,6 +469,7 @@
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
@@ -458,7 +478,6 @@
 #
 # CFG80211 needs to be enabled for MAC80211
 #
-CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +490,7 @@
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -480,9 +500,9 @@
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -620,6 +640,7 @@
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
 CONFIG_SATA_PMP=y
 # CONFIG_SATA_AHCI is not set
 CONFIG_SATA_SIL24=y
@@ -641,6 +662,7 @@
 # CONFIG_PATA_ALI is not set
 # CONFIG_PATA_AMD is not set
 # CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
 # CONFIG_PATA_ATIIXP is not set
 # CONFIG_PATA_CMD640_PCI is not set
 # CONFIG_PATA_CMD64X is not set
@@ -668,6 +690,7 @@
 # CONFIG_PATA_OPTIDMA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
 # CONFIG_PATA_RZ1000 is not set
 # CONFIG_PATA_SC1200 is not set
 # CONFIG_PATA_SERVERWORKS is not set
@@ -686,7 +709,11 @@
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -782,6 +809,7 @@
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -789,10 +817,7 @@
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -842,14 +867,19 @@
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_SH_KEYSC is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -902,6 +932,7 @@
 CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_ALGOPCA=y
@@ -931,6 +962,7 @@
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SH_MOBILE is not set
@@ -958,15 +990,17 @@
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -987,14 +1021,24 @@
 # PCI GPIO expanders:
 #
 # CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
 
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -1045,6 +1089,7 @@
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,9 +1101,7 @@
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-CONFIG_THERMAL_HWMON=y
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -1079,8 +1122,10 @@
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
 CONFIG_MEDIA_SUPPORT=y
 
@@ -1099,6 +1144,7 @@
 #
 # Graphics support
 #
+CONFIG_VGA_ARB=y
 # CONFIG_DRM is not set
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
@@ -1183,7 +1229,6 @@
 # CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1206,6 +1251,7 @@
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1255,6 +1301,7 @@
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1373,6 +1420,7 @@
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1422,6 +1470,7 @@
 CONFIG_EXT4_FS_XATTR=y
 # CONFIG_EXT4_FS_POSIX_ACL is not set
 # CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_JBD2=y
@@ -1431,9 +1480,11 @@
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 CONFIG_BTRFS_FS=y
 # CONFIG_BTRFS_FS_POSIX_ACL is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1499,12 +1550,12 @@
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1576,6 +1627,7 @@
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1610,18 +1662,23 @@
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_TRACING_SUPPORT=y
 # CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
@@ -1633,11 +1690,11 @@
 CONFIG_EARLY_SCIF_CONSOLE=y
 CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffeb0000
 CONFIG_EARLY_PRINTK=y
-# CONFIG_DEBUG_BOOTMEM is not set
-# CONFIG_DEBUG_STACKOVERFLOW is not set
+# CONFIG_STACK_DEBUG is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_4KSTACKS is not set
 # CONFIG_DUMP_CODE is not set
+# CONFIG_DWARF_UNWINDER is not set
 # CONFIG_SH_NO_BSS_INIT is not set
 
 #
@@ -1652,7 +1709,6 @@
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1694,11 +1750,13 @@
 #
 CONFIG_CRYPTO_HMAC=y
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
@@ -1764,5 +1822,6 @@
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
 CONFIG_GENERIC_ATOMIC64=y
diff --git a/arch/sh/include/asm/sh_eth.h b/arch/sh/include/asm/sh_eth.h
index acf9970..f739061 100644
--- a/arch/sh/include/asm/sh_eth.h
+++ b/arch/sh/include/asm/sh_eth.h
@@ -7,6 +7,7 @@
 	int phy;
 	int edmac_endian;
 
+	unsigned char mac_addr[6];
 	unsigned no_ether_link:1;
 	unsigned ether_link_active_low:1;
 };
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 3509775..5491b09 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -17,6 +17,7 @@
 #include <linux/sh_timer.h>
 #include <asm/clock.h>
 #include <asm/mmzone.h>
+#include <asm/dma-sh.h>
 #include <cpu/sh7722.h>
 
 static struct resource rtc_resources[] = {
@@ -373,6 +374,18 @@
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = 0,
+};
+
+static struct platform_device dma_device = {
+	.name		= "sh-dma-engine",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7722_devices[] __initdata = {
 	&cmt_device,
 	&tmu0_device,
@@ -385,6 +398,7 @@
 	&vpu_device,
 	&veu_device,
 	&jpu_device,
+	&dma_device,
 };
 
 static int __init sh7722_devices_setup(void)
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
index 2c901f4..12ff56f 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7780.c
@@ -13,6 +13,7 @@
 #include <linux/io.h>
 #include <linux/serial_sci.h>
 #include <linux/sh_timer.h>
+#include <asm/dma-sh.h>
 
 static struct sh_timer_config tmu0_platform_data = {
 	.name = "TMU0",
@@ -240,6 +241,18 @@
 	},
 };
 
+static struct sh_dmae_pdata dma_platform_data = {
+	.mode = (SHDMA_MIX_IRQ | SHDMA_DMAOR1),
+};
+
+static struct platform_device dma_device = {
+	.name           = "sh-dma-engine",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &dma_platform_data,
+	},
+};
+
 static struct platform_device *sh7780_devices[] __initdata = {
 	&tmu0_device,
 	&tmu1_device,
@@ -249,6 +262,7 @@
 	&tmu5_device,
 	&rtc_device,
 	&sci_device,
+	&dma_device,
 };
 
 static int __init sh7780_devices_setup(void)
diff --git a/arch/sh/kernel/dwarf.c b/arch/sh/kernel/dwarf.c
index bc4d8d7..03b3616 100644
--- a/arch/sh/kernel/dwarf.c
+++ b/arch/sh/kernel/dwarf.c
@@ -24,7 +24,6 @@
 #include <asm/unwinder.h>
 #include <asm/sections.h>
 #include <asm/unaligned.h>
-#include <asm/dwarf.h>
 #include <asm/stacktrace.h>
 
 /* Reserve enough memory for two stack frames */
diff --git a/arch/sh/kernel/syscalls_64.S b/arch/sh/kernel/syscalls_64.S
index 5bfde6c..07d2aae 100644
--- a/arch/sh/kernel/syscalls_64.S
+++ b/arch/sh/kernel/syscalls_64.S
@@ -391,3 +391,4 @@
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo
 	.long sys_perf_event_open
+	.long sys_recvmmsg		/* 365 */
diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c
index 6aba9af..69bb165 100644
--- a/arch/sh/kernel/traps_32.c
+++ b/arch/sh/kernel/traps_32.c
@@ -452,6 +452,12 @@
 	u_int rm;
 	int ret, index;
 
+	/*
+	 * XXX: We can't handle mixed 16/32-bit instructions yet
+	 */
+	if (instruction_size(instruction) != 2)
+		return -EINVAL;
+
 	index = (instruction>>8)&15;	/* 0x0F00 */
 	rm = regs->regs[index];
 
@@ -619,9 +625,9 @@
 
 		se_user += 1;
 
-#ifndef CONFIG_CPU_SH2A
 		set_fs(USER_DS);
-		if (copy_from_user(&instruction, (u16 *)(regs->pc & ~1), 2)) {
+		if (copy_from_user(&instruction, (insn_size_t *)(regs->pc & ~1),
+				   sizeof(instruction))) {
 			set_fs(oldfs);
 			goto uspace_segv;
 		}
@@ -633,7 +639,6 @@
 			       "in \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
 			       current->comm, current->pid, (void *)regs->pc,
 			       instruction);
-#endif
 
 		if (se_usermode & 2)
 			goto fixup;
@@ -673,12 +678,6 @@
 	} else {
 		se_sys += 1;
 
-		if (se_kernmode_warn)
-			printk(KERN_NOTICE "Unaligned kernel access "
-			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
-			       current->comm, current->pid, (void *)regs->pc,
-			       instruction);
-
 		if (regs->pc & 1)
 			die("unaligned program counter", regs, error_code);
 
@@ -692,6 +691,12 @@
 			die("insn faulting in do_address_error", regs, 0);
 		}
 
+		if (se_kernmode_warn)
+			printk(KERN_NOTICE "Unaligned kernel access "
+			       "on behalf of \"%s\" pid=%d pc=0x%p ins=0x%04hx\n",
+			       current->comm, current->pid, (void *)regs->pc,
+			       instruction);
+
 		handle_unaligned_access(instruction, regs,
 					&user_mem_access, 0);
 		set_fs(oldfs);
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 97fca46..ac45aab 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -102,6 +102,9 @@
 config NEED_PER_CPU_EMBED_FIRST_CHUNK
 	def_bool y if SPARC64
 
+config NEED_PER_CPU_PAGE_FIRST_CHUNK
+	def_bool y if SPARC64
+
 config GENERIC_HARDIRQS_NO__DO_IRQ
 	bool
 	def_bool y if SPARC64
diff --git a/arch/sparc/include/asm/socket.h b/arch/sparc/include/asm/socket.h
index 3a5ae3d..9d3fefc 100644
--- a/arch/sparc/include/asm/socket.h
+++ b/arch/sparc/include/asm/socket.h
@@ -56,6 +56,8 @@
 #define SO_TIMESTAMPING		0x0023
 #define SCM_TIMESTAMPING	SO_TIMESTAMPING
 
+#define SO_RXQ_OVFL             0x0024
+
 /* Security levels - as per NRL IPv6 - don't actually do anything */
 #define SO_SECURITY_AUTHENTICATION		0x5001
 #define SO_SECURITY_ENCRYPTION_TRANSPORT	0x5002
diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h
index 42f2316..d8d25bd 100644
--- a/arch/sparc/include/asm/unistd.h
+++ b/arch/sparc/include/asm/unistd.h
@@ -396,8 +396,9 @@
 #define __NR_pwritev		325
 #define __NR_rt_tgsigqueueinfo	326
 #define __NR_perf_event_open	327
+#define __NR_recvmmsg		328
 
-#define NR_SYSCALLS		328
+#define NR_SYSCALLS		329
 
 #ifdef __32bit_syscall_numbers__
 /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants,
diff --git a/arch/sparc/include/asm/vio.h b/arch/sparc/include/asm/vio.h
index 6cdbf7e..9d83d3b 100644
--- a/arch/sparc/include/asm/vio.h
+++ b/arch/sparc/include/asm/vio.h
@@ -258,8 +258,6 @@
 static inline u32 vio_dring_avail(struct vio_dring_state *dr,
 				  unsigned int ring_size)
 {
-	MAYBE_BUILD_BUG_ON(!is_power_of_2(ring_size));
-
 	return (dr->pending -
 		((dr->prod - dr->cons) & (ring_size - 1)));
 }
diff --git a/arch/sparc/kernel/smp_64.c b/arch/sparc/kernel/smp_64.c
index ff68373..aa36223 100644
--- a/arch/sparc/kernel/smp_64.c
+++ b/arch/sparc/kernel/smp_64.c
@@ -1420,7 +1420,7 @@
 	free_bootmem(__pa(ptr), size);
 }
 
-static int pcpu_cpu_distance(unsigned int from, unsigned int to)
+static int __init pcpu_cpu_distance(unsigned int from, unsigned int to)
 {
 	if (cpu_to_node(from) == cpu_to_node(to))
 		return LOCAL_DISTANCE;
@@ -1428,18 +1428,53 @@
 		return REMOTE_DISTANCE;
 }
 
+static void __init pcpu_populate_pte(unsigned long addr)
+{
+	pgd_t *pgd = pgd_offset_k(addr);
+	pud_t *pud;
+	pmd_t *pmd;
+
+	pud = pud_offset(pgd, addr);
+	if (pud_none(*pud)) {
+		pmd_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pud_populate(&init_mm, pud, new);
+	}
+
+	pmd = pmd_offset(pud, addr);
+	if (!pmd_present(*pmd)) {
+		pte_t *new;
+
+		new = __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, PAGE_SIZE);
+		pmd_populate_kernel(&init_mm, pmd, new);
+	}
+}
+
 void __init setup_per_cpu_areas(void)
 {
 	unsigned long delta;
 	unsigned int cpu;
-	int rc;
+	int rc = -EINVAL;
 
-	rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
-				    PERCPU_DYNAMIC_RESERVE, 4 << 20,
-				    pcpu_cpu_distance, pcpu_alloc_bootmem,
-				    pcpu_free_bootmem);
-	if (rc)
-		panic("failed to initialize first chunk (%d)", rc);
+	if (pcpu_chosen_fc != PCPU_FC_PAGE) {
+		rc = pcpu_embed_first_chunk(PERCPU_MODULE_RESERVE,
+					    PERCPU_DYNAMIC_RESERVE, 4 << 20,
+					    pcpu_cpu_distance,
+					    pcpu_alloc_bootmem,
+					    pcpu_free_bootmem);
+		if (rc)
+			pr_warning("PERCPU: %s allocator failed (%d), "
+				   "falling back to page size\n",
+				   pcpu_fc_names[pcpu_chosen_fc], rc);
+	}
+	if (rc < 0)
+		rc = pcpu_page_first_chunk(PERCPU_MODULE_RESERVE,
+					   pcpu_alloc_bootmem,
+					   pcpu_free_bootmem,
+					   pcpu_populate_pte);
+	if (rc < 0)
+		panic("cannot initialize percpu area (err=%d)", rc);
 
 	delta = (unsigned long)pcpu_base_addr - (unsigned long)__per_cpu_start;
 	for_each_possible_cpu(cpu)
diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S
index 0f1658d..ceb1530 100644
--- a/arch/sparc/kernel/systbls_32.S
+++ b/arch/sparc/kernel/systbls_32.S
@@ -82,5 +82,5 @@
 /*310*/	.long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 /*315*/	.long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+/*325*/	.long sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
 
diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S
index 009825f..f37bef7 100644
--- a/arch/sparc/kernel/systbls_64.S
+++ b/arch/sparc/kernel/systbls_64.S
@@ -83,7 +83,7 @@
 /*310*/	.word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate
 	.word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv
-	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word compat_sys_pwritev, compat_sys_rt_tgsigqueueinfo, sys_perf_event_open, compat_sys_recvmmsg
 
 #endif /* CONFIG_COMPAT */
 
@@ -158,4 +158,4 @@
 /*310*/	.word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate
 	.word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1
 /*320*/	.word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv
-	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open
+	.word sys_pwritev, sys_rt_tgsigqueueinfo, sys_perf_event_open, sys_recvmmsg
diff --git a/arch/um/include/asm/common.lds.S b/arch/um/include/asm/common.lds.S
index 37ecc55..ac55b9e 100644
--- a/arch/um/include/asm/common.lds.S
+++ b/arch/um/include/asm/common.lds.S
@@ -16,11 +16,7 @@
 
   . = ALIGN(4096);
   .note : { *(.note.*) }
-  __ex_table : {
-	__start___ex_table = .;
-	*(__ex_table)
-	__stop___ex_table = .;
-  }
+  EXCEPTION_TABLE(0)
 
   BUG_TABLE
 
@@ -43,28 +39,17 @@
   }
 	
   .init.setup : {
-	__setup_start = .;
-	*(.init.setup)
-	__setup_end = .;
+	INIT_SETUP(0)
   }
 
-  . = ALIGN(32);
-  .data.percpu : {
-	__per_cpu_start = . ;
-	*(.data.percpu)
-	__per_cpu_end = . ;
-  }
+  PERCPU(32)
 	
   .initcall.init : {
-	__initcall_start = .;
-	INITCALLS
-	__initcall_end = .;
+	INIT_CALLS
   }
 
   .con_initcall.init : {
-	__con_initcall_start = .;
-	*(.con_initcall.init)
-	__con_initcall_end = .;
+	CON_INITCALL
   }
 
   .uml.initcall.init : {
@@ -118,8 +103,6 @@
 
    . = ALIGN(4096);
   .init.ramfs : {
-	__initramfs_start = .;
-	*(.init.ramfs)
-	__initramfs_end = .;
+	INIT_RAM_FS
   }
 
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 715a188..7fcad58 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -16,11 +16,7 @@
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   . = ALIGN(PAGE_SIZE);
 
@@ -96,8 +92,7 @@
   .init_array     : { *(.init_array) }
   .fini_array     : { *(.fini_array) }
   .data           : {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 2ebd397..e7a6cca 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -22,11 +22,7 @@
   _text = .;
   _stext = .;
   __init_begin = .;
-  .init.text : {
-	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
   . = ALIGN(PAGE_SIZE);
 
   .text      :
@@ -52,8 +48,7 @@
   init.data : { INIT_DATA }
   .data    :
   {
-    . = ALIGN(KERNEL_STACK_SIZE);		/* init_task */
-    *(.data.init_task)
+    INIT_TASK_DATA(KERNEL_STACK_SIZE)
     . = ALIGN(KERNEL_STACK_SIZE);
     *(.data.init_irqstack)
     DATA_DATA
@@ -81,19 +76,10 @@
   _edata  =  .;
   PROVIDE (edata = .);
   . = ALIGN(PAGE_SIZE);
-  .sbss      :
-  {
-   __bss_start = .;
-   PROVIDE(_bss_start = .);
-   *(.sbss)
-   *(.scommon)
-  }
-  .bss       :
-  {
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
+  __bss_start = .;
+  PROVIDE(_bss_start = .);
+  SBSS(0)
+  BSS(0)
   _end = .;
   PROVIDE (end = .);
 
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 9369879..8da9374 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -432,6 +432,17 @@
 	  of Flat Logical.  You will need a new lynxer.elf file to flash your
 	  firmware with - send email to <Martin.Bligh@us.ibm.com>.
 
+config X86_SUPPORTS_MEMORY_FAILURE
+	bool
+	# MCE code calls memory_failure():
+	depends on X86_MCE
+	# On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
+	depends on !X86_NUMAQ
+	# On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH:
+	depends on X86_64 || !SPARSEMEM
+	select ARCH_SUPPORTS_MEMORY_FAILURE
+	default y
+
 config X86_VISWS
 	bool "SGI 320/540 (Visual Workstation)"
 	depends on X86_32 && PCI && X86_MPPARSE && PCI_GODIRECT
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 75e4f00..f543b70 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -23,13 +23,14 @@
  */
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/page_types.h>
 #include <asm/boot.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head","ax",@progbits
+	__HEAD
 ENTRY(startup_32)
 	cld
 	/*
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index f62c284..077e1b6 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -24,6 +24,7 @@
 	.code32
 	.text
 
+#include <linux/init.h>
 #include <linux/linkage.h>
 #include <asm/segment.h>
 #include <asm/pgtable_types.h>
@@ -33,7 +34,7 @@
 #include <asm/processor-flags.h>
 #include <asm/asm-offsets.h>
 
-	.section ".text.head"
+	__HEAD
 	.code32
 ENTRY(startup_32)
 	cld
diff --git a/arch/x86/boot/compressed/vmlinux.lds.S b/arch/x86/boot/compressed/vmlinux.lds.S
index cc353e1..f4193bb 100644
--- a/arch/x86/boot/compressed/vmlinux.lds.S
+++ b/arch/x86/boot/compressed/vmlinux.lds.S
@@ -1,3 +1,5 @@
+#include <asm-generic/vmlinux.lds.h>
+
 OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
 
 #undef i386
@@ -18,9 +20,9 @@
 	 * address 0.
 	 */
 	. = 0;
-	.text.head : {
+	.head.text : {
 		_head = . ;
-		*(.text.head)
+		HEAD_TEXT
 		_ehead = . ;
 	}
 	.rodata.compressed : {
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 74619c4..11a6c79 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -832,4 +832,5 @@
 	.quad compat_sys_pwritev
 	.quad compat_sys_rt_tgsigqueueinfo	/* 335 */
 	.quad sys_perf_event_open
+	.quad compat_sys_recvmmsg
 ia32_syscall_end:
diff --git a/arch/x86/include/asm/checksum_32.h b/arch/x86/include/asm/checksum_32.h
index 7c5ef8b..46fc474 100644
--- a/arch/x86/include/asm/checksum_32.h
+++ b/arch/x86/include/asm/checksum_32.h
@@ -161,7 +161,8 @@
 	    "adcl $0, %0	;\n"
 	    : "=&r" (sum)
 	    : "r" (saddr), "r" (daddr),
-	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+	      "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+	    : "memory");
 
 	return csum_fold(sum);
 }
diff --git a/arch/x86/include/asm/cmpxchg_32.h b/arch/x86/include/asm/cmpxchg_32.h
index 82ceb78..ee1931b 100644
--- a/arch/x86/include/asm/cmpxchg_32.h
+++ b/arch/x86/include/asm/cmpxchg_32.h
@@ -312,19 +312,23 @@
 
 extern unsigned long long cmpxchg_486_u64(volatile void *, u64, u64);
 
-#define cmpxchg64(ptr, o, n)						\
-({									\
-	__typeof__(*(ptr)) __ret;					\
-	if (likely(boot_cpu_data.x86 > 4))				\
-		__ret = (__typeof__(*(ptr)))__cmpxchg64((ptr),		\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	else								\
-		__ret = (__typeof__(*(ptr)))cmpxchg_486_u64((ptr),	\
-				(unsigned long long)(o),		\
-				(unsigned long long)(n));		\
-	__ret;								\
-})
+#define cmpxchg64(ptr, o, n)					\
+({								\
+	__typeof__(*(ptr)) __ret;				\
+	__typeof__(*(ptr)) __old = (o);				\
+	__typeof__(*(ptr)) __new = (n);				\
+	alternative_io("call cmpxchg8b_emu",			\
+			"lock; cmpxchg8b (%%esi)" ,		\
+		       X86_FEATURE_CX8,				\
+		       "=A" (__ret),				\
+		       "S" ((ptr)), "0" (__old),		\
+		       "b" ((unsigned int)__new),		\
+		       "c" ((unsigned int)(__new>>32))		\
+		       : "memory");				\
+	__ret; })
+
+
+
 #define cmpxchg64_local(ptr, o, n)					\
 ({									\
 	__typeof__(*(ptr)) __ret;					\
diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h
index 7b467bf..d1f4a76 100644
--- a/arch/x86/include/asm/pgtable_types.h
+++ b/arch/x86/include/asm/pgtable_types.h
@@ -277,6 +277,7 @@
 typedef struct page *pgtable_t;
 
 extern pteval_t __supported_pte_mask;
+extern void set_nx(void);
 extern int nx_enabled;
 
 #define pgprot_writecombine	pgprot_writecombine
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 6f0695d..25a9284 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -165,21 +165,11 @@
 	return 0;
 }
 
-static inline int cpu_to_node(int cpu)
-{
-	return 0;
-}
-
 static inline int early_cpu_to_node(int cpu)
 {
 	return 0;
 }
 
-static inline const struct cpumask *cpumask_of_node(int node)
-{
-	return cpu_online_mask;
-}
-
 static inline void setup_node_to_cpumask_map(void) { }
 
 #endif
diff --git a/arch/x86/include/asm/unistd_32.h b/arch/x86/include/asm/unistd_32.h
index 6fb3c20..3baf379 100644
--- a/arch/x86/include/asm/unistd_32.h
+++ b/arch/x86/include/asm/unistd_32.h
@@ -342,10 +342,11 @@
 #define __NR_pwritev		334
 #define __NR_rt_tgsigqueueinfo	335
 #define __NR_perf_event_open	336
+#define __NR_recvmmsg		337
 
 #ifdef __KERNEL__
 
-#define NR_syscalls 337
+#define NR_syscalls 338
 
 #define __ARCH_WANT_IPC_PARSE_VERSION
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/include/asm/unistd_64.h b/arch/x86/include/asm/unistd_64.h
index 8d3ad0a..4843f7b 100644
--- a/arch/x86/include/asm/unistd_64.h
+++ b/arch/x86/include/asm/unistd_64.h
@@ -661,6 +661,8 @@
 __SYSCALL(__NR_rt_tgsigqueueinfo, sys_rt_tgsigqueueinfo)
 #define __NR_perf_event_open			298
 __SYSCALL(__NR_perf_event_open, sys_perf_event_open)
+#define __NR_recvmmsg				299
+__SYSCALL(__NR_recvmmsg, sys_recvmmsg)
 
 #ifndef __NO_STUBS
 #define __ARCH_WANT_OLD_READDIR
diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c
index 8c44c23..59cdfa4 100644
--- a/arch/x86/kernel/acpi/cstate.c
+++ b/arch/x86/kernel/acpi/cstate.c
@@ -48,7 +48,7 @@
 	 * P4, Core and beyond CPUs
 	 */
 	if (c->x86_vendor == X86_VENDOR_INTEL &&
-	    (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14)))
+	    (c->x86 > 0xf || (c->x86 == 6 && c->x86_model >= 14)))
 			flags->bm_control = 0;
 }
 EXPORT_SYMBOL(acpi_processor_power_init_bm_check);
diff --git a/arch/x86/kernel/cpu/mcheck/mce-inject.c b/arch/x86/kernel/cpu/mcheck/mce-inject.c
index 7029f0e..472763d 100644
--- a/arch/x86/kernel/cpu/mcheck/mce-inject.c
+++ b/arch/x86/kernel/cpu/mcheck/mce-inject.c
@@ -98,8 +98,9 @@
 };
 
 /* Inject mce on current CPU */
-static int raise_local(struct mce *m)
+static int raise_local(void)
 {
+	struct mce *m = &__get_cpu_var(injectm);
 	int context = MCJ_CTX(m->inject_flags);
 	int ret = 0;
 	int cpu = m->extcpu;
@@ -167,12 +168,12 @@
 			}
 			cpu_relax();
 		}
-		raise_local(m);
+		raise_local();
 		put_cpu();
 		put_online_cpus();
 	} else
 #endif
-		raise_local(m);
+		raise_local();
 }
 
 /* Error injection interface */
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 2f5aab2..183c345 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -204,10 +204,7 @@
 static void print_mce_tail(void)
 {
 	printk(KERN_EMERG "This is not a software problem!\n"
-#if (!defined(CONFIG_EDAC) || !defined(CONFIG_CPU_SUP_AMD))
-	       "Run through mcelog --ascii to decode and contact your hardware vendor\n"
-#endif
-	       );
+	       "Run through mcelog --ascii to decode and contact your hardware vendor\n");
 }
 
 #define PANIC_TIMEOUT 5 /* 5 seconds */
@@ -305,13 +302,25 @@
 static u64 mce_rdmsrl(u32 msr)
 {
 	u64 v;
+
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset < 0)
 			return 0;
 		return *(u64 *)((char *)&__get_cpu_var(injectm) + offset);
 	}
-	rdmsrl(msr, v);
+
+	if (rdmsrl_safe(msr, &v)) {
+		WARN_ONCE(1, "mce: Unable to read msr %d!\n", msr);
+		/*
+		 * Return zero in case the access faulted. This should
+		 * not happen normally but can happen if the CPU does
+		 * something weird, or if the code is buggy.
+		 */
+		v = 0;
+	}
+
 	return v;
 }
 
@@ -319,6 +328,7 @@
 {
 	if (__get_cpu_var(injectm).finished) {
 		int offset = msr_to_offset(msr);
+
 		if (offset >= 0)
 			*(u64 *)((char *)&__get_cpu_var(injectm) + offset) = v;
 		return;
@@ -415,7 +425,7 @@
 		m->ip = mce_rdmsrl(rip_msr);
 }
 
-#ifdef CONFIG_X86_LOCAL_APIC 
+#ifdef CONFIG_X86_LOCAL_APIC
 /*
  * Called after interrupts have been reenabled again
  * when a MCE happened during an interrupts off region
@@ -1172,6 +1182,7 @@
 		return -ENOMEM;
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		b->ctl = -1ULL;
 		b->init = 1;
 	}
@@ -1203,6 +1214,7 @@
 	banks = b;
 	if (!mce_banks) {
 		int err = mce_banks_init();
+
 		if (err)
 			return err;
 	}
@@ -1237,6 +1249,7 @@
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (!b->init)
 			continue;
 		wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
@@ -1626,6 +1639,7 @@
 
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1911,6 +1925,7 @@
 		cmci_clear();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), 0);
 	}
@@ -1928,6 +1943,7 @@
 		cmci_reenable();
 	for (i = 0; i < banks; i++) {
 		struct mce_bank *b = &mce_banks[i];
+
 		if (b->init)
 			wrmsrl(MSR_IA32_MCx_CTL(i), b->ctl);
 	}
diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c
index 63a56d1..b3a1dba 100644
--- a/arch/x86/kernel/cpu/mcheck/therm_throt.c
+++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c
@@ -34,20 +34,31 @@
 /* How long to wait between reporting thermal events */
 #define CHECK_INTERVAL		(300 * HZ)
 
-static DEFINE_PER_CPU(__u64, next_check) = INITIAL_JIFFIES;
-static DEFINE_PER_CPU(unsigned long, thermal_throttle_count);
-static DEFINE_PER_CPU(bool, thermal_throttle_active);
+/*
+ * Current thermal throttling state:
+ */
+struct thermal_state {
+	bool			is_throttled;
 
-static atomic_t therm_throt_en		= ATOMIC_INIT(0);
+	u64			next_check;
+	unsigned long		throttle_count;
+	unsigned long		last_throttle_count;
+};
+
+static DEFINE_PER_CPU(struct thermal_state, thermal_state);
+
+static atomic_t therm_throt_en	= ATOMIC_INIT(0);
 
 #ifdef CONFIG_SYSFS
 #define define_therm_throt_sysdev_one_ro(_name)				\
 	static SYSDEV_ATTR(_name, 0444, therm_throt_sysdev_show_##_name, NULL)
 
 #define define_therm_throt_sysdev_show_func(name)			\
-static ssize_t therm_throt_sysdev_show_##name(struct sys_device *dev,	\
-					struct sysdev_attribute *attr,	\
-					      char *buf)		\
+									\
+static ssize_t therm_throt_sysdev_show_##name(				\
+			struct sys_device *dev,				\
+			struct sysdev_attribute *attr,			\
+			char *buf)					\
 {									\
 	unsigned int cpu = dev->id;					\
 	ssize_t ret;							\
@@ -55,7 +66,7 @@
 	preempt_disable();	/* CPU hotplug */			\
 	if (cpu_online(cpu))						\
 		ret = sprintf(buf, "%lu\n",				\
-			      per_cpu(thermal_throttle_##name, cpu));	\
+			      per_cpu(thermal_state, cpu).name);	\
 	else								\
 		ret = 0;						\
 	preempt_enable();						\
@@ -63,11 +74,11 @@
 	return ret;							\
 }
 
-define_therm_throt_sysdev_show_func(count);
-define_therm_throt_sysdev_one_ro(count);
+define_therm_throt_sysdev_show_func(throttle_count);
+define_therm_throt_sysdev_one_ro(throttle_count);
 
 static struct attribute *thermal_throttle_attrs[] = {
-	&attr_count.attr,
+	&attr_throttle_count.attr,
 	NULL
 };
 
@@ -93,33 +104,39 @@
  *          1 : Event should be logged further, and a message has been
  *              printed to the syslog.
  */
-static int therm_throt_process(int curr)
+static int therm_throt_process(bool is_throttled)
 {
-	unsigned int cpu = smp_processor_id();
-	__u64 tmp_jiffs = get_jiffies_64();
-	bool was_throttled = __get_cpu_var(thermal_throttle_active);
-	bool is_throttled = __get_cpu_var(thermal_throttle_active) = curr;
+	struct thermal_state *state;
+	unsigned int this_cpu;
+	bool was_throttled;
+	u64 now;
+
+	this_cpu = smp_processor_id();
+	now = get_jiffies_64();
+	state = &per_cpu(thermal_state, this_cpu);
+
+	was_throttled = state->is_throttled;
+	state->is_throttled = is_throttled;
 
 	if (is_throttled)
-		__get_cpu_var(thermal_throttle_count)++;
+		state->throttle_count++;
 
-	if (!(was_throttled ^ is_throttled) &&
-	    time_before64(tmp_jiffs, __get_cpu_var(next_check)))
+	if (time_before64(now, state->next_check) &&
+			state->throttle_count != state->last_throttle_count)
 		return 0;
 
-	__get_cpu_var(next_check) = tmp_jiffs + CHECK_INTERVAL;
+	state->next_check = now + CHECK_INTERVAL;
+	state->last_throttle_count = state->throttle_count;
 
 	/* if we just entered the thermal event */
 	if (is_throttled) {
-		printk(KERN_CRIT "CPU%d: Temperature above threshold, "
-		       "cpu clock throttled (total events = %lu)\n",
-		       cpu, __get_cpu_var(thermal_throttle_count));
+		printk(KERN_CRIT "CPU%d: Temperature above threshold, cpu clock throttled (total events = %lu)\n", this_cpu, state->throttle_count);
 
 		add_taint(TAINT_MACHINE_CHECK);
 		return 1;
 	}
 	if (was_throttled) {
-		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", cpu);
+		printk(KERN_INFO "CPU%d: Temperature/speed normal\n", this_cpu);
 		return 1;
 	}
 
@@ -213,7 +230,7 @@
 	__u64 msr_val;
 
 	rdmsrl(MSR_IA32_THERM_STATUS, msr_val);
-	if (therm_throt_process(msr_val & THERM_STATUS_PROCHOT))
+	if (therm_throt_process((msr_val & THERM_STATUS_PROCHOT) != 0))
 		mce_log_therm_throt_event(msr_val);
 }
 
diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c
index a3c7adb..b5801c3 100644
--- a/arch/x86/kernel/cpu/perf_event.c
+++ b/arch/x86/kernel/cpu/perf_event.c
@@ -1790,6 +1790,9 @@
 void set_perf_event_pending(void)
 {
 #ifdef CONFIG_X86_LOCAL_APIC
+	if (!x86_pmu.apic || !x86_pmu_initialized())
+		return;
+
 	apic->send_IPI_self(LOCAL_PENDING_VECTOR);
 #endif
 }
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index 2acfd3f..41fd965 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -178,6 +178,11 @@
 
 static inline void early_console_register(struct console *con, int keep_early)
 {
+	if (early_console->index != -1) {
+		printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
+		       con->name);
+		return;
+	}
 	early_console = con;
 	if (keep_early)
 		early_console->flags &= ~CON_BOOT;
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 218aad7..050c278 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -79,7 +79,7 @@
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
-.section .text.head,"ax",@progbits
+__HEAD
 ENTRY(startup_32)
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index d0bc0a1..780cd92 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -40,7 +40,7 @@
 L3_START_KERNEL = pud_index(__START_KERNEL_map)
 
 	.text
-	.section .text.head
+	__HEAD
 	.code64
 	.globl startup_64
 startup_64:
diff --git a/arch/x86/kernel/i386_ksyms_32.c b/arch/x86/kernel/i386_ksyms_32.c
index 43cec6b..1736c5a 100644
--- a/arch/x86/kernel/i386_ksyms_32.c
+++ b/arch/x86/kernel/i386_ksyms_32.c
@@ -10,6 +10,14 @@
 EXPORT_SYMBOL(mcount);
 #endif
 
+/*
+ * Note, this is a prototype to get at the symbol for
+ * the export, but dont use it from C code, it is used
+ * by assembly code and is not using C calling convention!
+ */
+extern void cmpxchg8b_emu(void);
+EXPORT_SYMBOL(cmpxchg8b_emu);
+
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_partial_copy_generic);
 
diff --git a/arch/x86/kernel/syscall_table_32.S b/arch/x86/kernel/syscall_table_32.S
index 0157cd2..70c2125 100644
--- a/arch/x86/kernel/syscall_table_32.S
+++ b/arch/x86/kernel/syscall_table_32.S
@@ -336,3 +336,4 @@
 	.long sys_pwritev
 	.long sys_rt_tgsigqueueinfo	/* 335 */
 	.long sys_perf_event_open
+	.long sys_recvmmsg
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a665c71..7e37dce 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -72,11 +72,9 @@
 
 /*
  * The IDT has to be page-aligned to simplify the Pentium
- * F0 0F bug workaround.. We have a special link segment
- * for this.
+ * F0 0F bug workaround.
  */
-gate_desc idt_table[NR_VECTORS]
-	__attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, };
+gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
 #endif
 
 DECLARE_BITMAP(used_vectors, NR_VECTORS);
diff --git a/arch/x86/kernel/tsc_sync.c b/arch/x86/kernel/tsc_sync.c
index 027b5b4..f379309 100644
--- a/arch/x86/kernel/tsc_sync.c
+++ b/arch/x86/kernel/tsc_sync.c
@@ -114,7 +114,7 @@
 		return;
 
 	if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
-		pr_info("Skipping synchronization checks as TSC is reliable.\n");
+		printk_once(KERN_INFO "Skipping synchronization checks as TSC is reliable.\n");
 		return;
 	}
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index a46accc..92929fb 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -65,17 +65,11 @@
 #endif
 
 	/* Text and read-only data */
-
-	/* bootstrapping code */
-	.text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
-		_text = .;
-		*(.text.head)
-	} :text = 0x9090
-
-	/* The rest of the text */
 	.text :  AT(ADDR(.text) - LOAD_OFFSET) {
+		_text = .;
+		/* bootstrapping code */
+		HEAD_TEXT
 #ifdef CONFIG_X86_32
-		/* not really needed, already page aligned */
 		. = ALIGN(PAGE_SIZE);
 		*(.text.page_aligned)
 #endif
@@ -94,13 +88,7 @@
 
 	NOTES :text :note
 
-	/* Exception table */
-	. = ALIGN(16);
-	__ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
-		__start___ex_table = .;
-		*(__ex_table)
-		__stop___ex_table = .;
-	} :text = 0x9090
+	EXCEPTION_TABLE(16) :text = 0x9090
 
 	RO_DATA(PAGE_SIZE)
 
@@ -118,7 +106,6 @@
 #endif
 
 		PAGE_ALIGNED_DATA(PAGE_SIZE)
-		*(.data.idt)
 
 		CACHELINE_ALIGNED_DATA(CONFIG_X86_L1_CACHE_BYTES)
 
@@ -135,24 +122,21 @@
 #ifdef CONFIG_X86_64
 
 #define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data) + SIZEOF(.data) + \
-                            PAGE_SIZE - 1) & ~(PAGE_SIZE - 1))
 
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD_OFFSET (VSYSCALL_ADDR - __vsyscall_0 + LOAD_OFFSET)
 #define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
 
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0)
 #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
 
+	. = ALIGN(4096);
+	__vsyscall_0 = .;
+
 	. = VSYSCALL_ADDR;
-	.vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+	.vsyscall_0 : AT(VLOAD(.vsyscall_0)) {
 		*(.vsyscall_0)
 	} :user
 
-	__vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
 	. = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
 	.vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
 		*(.vsyscall_fn)
@@ -192,11 +176,9 @@
 		*(.vsyscall_3)
 	}
 
-	. = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+	. = __vsyscall_0 + PAGE_SIZE;
 
 #undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
 #undef VLOAD_OFFSET
 #undef VLOAD
 #undef VVIRT_OFFSET
@@ -219,36 +201,12 @@
 	PERCPU_VADDR(0, :percpu)
 #endif
 
-	.init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
-		_sinittext = .;
-		INIT_TEXT
-		_einittext = .;
-	}
+	INIT_TEXT_SECTION(PAGE_SIZE)
 #ifdef CONFIG_X86_64
 	:init
 #endif
 
-	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
-		INIT_DATA
-	}
-
-	. = ALIGN(16);
-	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
-		__setup_start = .;
-		*(.init.setup)
-		__setup_end = .;
-	}
-	.initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
-		__initcall_start = .;
-		INITCALLS
-		__initcall_end = .;
-	}
-
-	.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
-		__con_initcall_start = .;
-		*(.con_initcall.init)
-		__con_initcall_end = .;
-	}
+	INIT_DATA_SECTION(16)
 
 	.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
 		__x86_cpu_dev_start = .;
@@ -256,8 +214,6 @@
 		__x86_cpu_dev_end = .;
 	}
 
-	SECURITY_INIT
-
 	. = ALIGN(8);
 	.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
 		__parainstructions = .;
@@ -288,15 +244,6 @@
 		EXIT_DATA
 	}
 
-#ifdef CONFIG_BLK_DEV_INITRD
-	. = ALIGN(PAGE_SIZE);
-	.init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
-		__initramfs_start = .;
-		*(.init.ramfs)
-		__initramfs_end = .;
-	}
-#endif
-
 #if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
 	PERCPU(PAGE_SIZE)
 #endif
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 9e60920..3e549b8 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -15,7 +15,7 @@
         obj-y += atomic64_32.o
         lib-y += checksum_32.o
         lib-y += strstr_32.o
-        lib-y += semaphore_32.o string_32.o
+        lib-y += semaphore_32.o string_32.o cmpxchg8b_emu.o
 
         lib-$(CONFIG_X86_USE_3DNOW) += mmx_32.o
 else
diff --git a/arch/x86/lib/cmpxchg8b_emu.S b/arch/x86/lib/cmpxchg8b_emu.S
new file mode 100644
index 0000000..828cb71
--- /dev/null
+++ b/arch/x86/lib/cmpxchg8b_emu.S
@@ -0,0 +1,57 @@
+/*
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License
+ *	as published by the Free Software Foundation; version 2
+ *	of the License.
+ *
+ */
+
+#include <linux/linkage.h>
+#include <asm/alternative-asm.h>
+#include <asm/frame.h>
+#include <asm/dwarf2.h>
+
+
+.text
+
+/*
+ * Inputs:
+ * %esi : memory location to compare
+ * %eax : low 32 bits of old value
+ * %edx : high 32 bits of old value
+ * %ebx : low 32 bits of new value
+ * %ecx : high 32 bits of new value
+ */
+ENTRY(cmpxchg8b_emu)
+CFI_STARTPROC
+
+#
+# Emulate 'cmpxchg8b (%esi)' on UP except we don't
+# set the whole ZF thing (caller will just compare
+# eax:edx with the expected value)
+#
+cmpxchg8b_emu:
+	pushfl
+	cli
+
+	cmpl  (%esi), %eax
+	jne not_same
+	cmpl 4(%esi), %edx
+	jne half_same
+
+	movl %ebx,  (%esi)
+	movl %ecx, 4(%esi)
+
+	popfl
+	ret
+
+ not_same:
+	movl  (%esi), %eax
+ half_same:
+	movl 4(%esi), %edx
+
+	popfl
+	ret
+
+CFI_ENDPROC
+ENDPROC(cmpxchg8b_emu)
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 9b5a9f5..06630d2 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -1,9 +1,10 @@
 obj-y	:=  init.o init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \
-	    pat.o pgtable.o physaddr.o gup.o
+	    pat.o pgtable.o physaddr.o gup.o setup_nx.o
 
 # Make sure __phys_addr has no stackprotector
 nostackp := $(call cc-option, -fno-stack-protector)
 CFLAGS_physaddr.o		:= $(nostackp)
+CFLAGS_setup_nx.o		:= $(nostackp)
 
 obj-$(CONFIG_SMP)		+= tlb.o
 
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index 0607119..73ffd55 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -28,69 +28,6 @@
 #endif
 ;
 
-int nx_enabled;
-
-#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec = on|off
- *
- * Control non-executable mappings for processes.
- *
- * on      Enable
- * off     Disable
- */
-static int __init noexec_setup(char *str)
-{
-	if (!str)
-		return -EINVAL;
-	if (!strncmp(str, "on", 2)) {
-		__supported_pte_mask |= _PAGE_NX;
-		disable_nx = 0;
-	} else if (!strncmp(str, "off", 3)) {
-		disable_nx = 1;
-		__supported_pte_mask &= ~_PAGE_NX;
-	}
-	return 0;
-}
-early_param("noexec", noexec_setup);
-#endif
-
-#ifdef CONFIG_X86_PAE
-static void __init set_nx(void)
-{
-	unsigned int v[4], l, h;
-
-	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
-		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
-		if ((v[3] & (1 << 20)) && !disable_nx) {
-			rdmsr(MSR_EFER, l, h);
-			l |= EFER_NX;
-			wrmsr(MSR_EFER, l, h);
-			nx_enabled = 1;
-			__supported_pte_mask |= _PAGE_NX;
-		}
-	}
-}
-#else
-static inline void set_nx(void)
-{
-}
-#endif
-
-#ifdef CONFIG_X86_64
-void __cpuinit check_efer(void)
-{
-	unsigned long efer;
-
-	rdmsrl(MSR_EFER, efer);
-	if (!(efer & EFER_NX) || disable_nx)
-		__supported_pte_mask &= ~_PAGE_NX;
-}
-#endif
-
 static void __init find_early_table_space(unsigned long end, int use_pse,
 					  int use_gbpages)
 {
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 7257cf3..e78cd0e 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -81,6 +81,7 @@
 void pat_init(void)
 {
 	u64 pat;
+	bool boot_cpu = !boot_pat_state;
 
 	if (!pat_enabled)
 		return;
@@ -122,8 +123,10 @@
 		rdmsrl(MSR_IA32_CR_PAT, boot_pat_state);
 
 	wrmsrl(MSR_IA32_CR_PAT, pat);
-	printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
-	       smp_processor_id(), boot_pat_state, pat);
+
+	if (boot_cpu)
+		printk(KERN_INFO "x86 PAT enabled: cpu %d, old 0x%Lx, new 0x%Lx\n",
+		       smp_processor_id(), boot_pat_state, pat);
 }
 
 #undef PAT
diff --git a/arch/x86/mm/setup_nx.c b/arch/x86/mm/setup_nx.c
new file mode 100644
index 0000000..513d8ed
--- /dev/null
+++ b/arch/x86/mm/setup_nx.c
@@ -0,0 +1,69 @@
+#include <linux/spinlock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+
+#include <asm/pgtable.h>
+
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on      Enable
+ * off     Disable
+ */
+static int __init noexec_setup(char *str)
+{
+	if (!str)
+		return -EINVAL;
+	if (!strncmp(str, "on", 2)) {
+		__supported_pte_mask |= _PAGE_NX;
+		disable_nx = 0;
+	} else if (!strncmp(str, "off", 3)) {
+		disable_nx = 1;
+		__supported_pte_mask &= ~_PAGE_NX;
+	}
+	return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+void __init set_nx(void)
+{
+	unsigned int v[4], l, h;
+
+	if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+		cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+		if ((v[3] & (1 << 20)) && !disable_nx) {
+			rdmsr(MSR_EFER, l, h);
+			l |= EFER_NX;
+			wrmsr(MSR_EFER, l, h);
+			nx_enabled = 1;
+			__supported_pte_mask |= _PAGE_NX;
+		}
+	}
+}
+#else
+void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+	unsigned long efer;
+
+	rdmsrl(MSR_EFER, efer);
+	if (!(efer & EFER_NX) || disable_nx)
+		__supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 52e62e5..b22d13b 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -266,7 +266,7 @@
 	pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat);
 }
 
-static struct vm_operations_struct pci_mmap_ops = {
+static const struct vm_operations_struct pci_mmap_ops = {
 	.access = generic_access_phys,
 };
 
diff --git a/arch/x86/xen/debugfs.c b/arch/x86/xen/debugfs.c
index b53225d..e133ce2 100644
--- a/arch/x86/xen/debugfs.c
+++ b/arch/x86/xen/debugfs.c
@@ -100,7 +100,7 @@
 	return 0;
 }
 
-static struct file_operations u32_array_fops = {
+static const struct file_operations u32_array_fops = {
 	.owner	= THIS_MODULE,
 	.open	= u32_array_open,
 	.release= xen_array_release,
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c
index 544eb74..3439616 100644
--- a/arch/x86/xen/enlighten.c
+++ b/arch/x86/xen/enlighten.c
@@ -1082,6 +1082,11 @@
 
 	__supported_pte_mask |= _PAGE_IOMAP;
 
+#ifdef CONFIG_X86_64
+	/* Work out if we support NX */
+	check_efer();
+#endif
+
 	xen_setup_features();
 
 	/* Get mfn list */
@@ -1123,11 +1128,6 @@
 
 	pgd = (pgd_t *)xen_start_info->pt_base;
 
-#ifdef CONFIG_X86_64
-	/* Work out if we support NX */
-	check_efer();
-#endif
-
 	/* Don't do the full vcpu_info placement stuff until we have a
 	   possible map and a non-dummy shared_info. */
 	per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
diff --git a/arch/xtensa/include/asm/socket.h b/arch/xtensa/include/asm/socket.h
index beb3a6b..cbdf2ff 100644
--- a/arch/xtensa/include/asm/socket.h
+++ b/arch/xtensa/include/asm/socket.h
@@ -71,4 +71,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif	/* _XTENSA_SOCKET_H */
diff --git a/arch/xtensa/include/asm/unistd.h b/arch/xtensa/include/asm/unistd.h
index c092c8f..4e55dc7 100644
--- a/arch/xtensa/include/asm/unistd.h
+++ b/arch/xtensa/include/asm/unistd.h
@@ -681,8 +681,10 @@
 __SYSCALL(305, sys_ni_syscall, 0)
 #define __NR_eventfd				306
 __SYSCALL(306, sys_eventfd, 1)
+#define __NR_recvmmsg				307
+__SYSCALL(307, sys_recvmmsg, 5)
 
-#define __NR_syscall_count			307
+#define __NR_syscall_count			308
 
 /*
  * sysxtensa syscall handler
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 921b6ff..9b52615 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -15,6 +15,8 @@
  */
 
 #include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
+#include <asm/thread_info.h>
 
 #include <variant/core.h>
 #include <platform/hardware.h>
@@ -107,41 +109,18 @@
 
   .fixup   : { *(.fixup) }
 
-  . = ALIGN(16);
-
-  __ex_table : {
-    __start___ex_table = .;
-    *(__ex_table)
-    __stop___ex_table = .;
-  }
-
+  EXCEPTION_TABLE(16)
   /* Data section */
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
   _fdata = .;
-  .data :
-  {
-    DATA_DATA
-    CONSTRUCTORS
-    . = ALIGN(XCHAL_ICACHE_LINESIZE);
-    *(.data.cacheline_aligned)
-  }
-
+  RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
   _edata = .;
 
-  /* The initial task */
-  . = ALIGN(8192);
-  .data.init_task : { *(.data.init_task) }
-
   /* Initialization code and data: */
 
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
   __init_begin = .;
-  .init.text : {
-  	_sinittext = .;
-	INIT_TEXT
-	_einittext = .;
-  }
+  INIT_TEXT_SECTION(PAGE_SIZE)
 
   .init.data :
   {
@@ -168,36 +147,15 @@
 		   .DebugInterruptVector.text);
   
     __boot_reloc_table_end = ABSOLUTE(.) ;
+
+    INIT_SETUP(XCHAL_ICACHE_LINESIZE)
+    INIT_CALLS
+    CON_INITCALL
+    SECURITY_INITCALL
+    INIT_RAM_FS
   }
 
-  . = ALIGN(XCHAL_ICACHE_LINESIZE);
-
-  __setup_start = .;
-  .init.setup : { *(.init.setup) }
-  __setup_end = .;
-
-  __initcall_start = .;
-  .initcall.init : {
-	INITCALLS
-  }
-  __initcall_end = .;
-
-  __con_initcall_start = .;
-  .con_initcall.init : { *(.con_initcall.init) }
-  __con_initcall_end = .;
-
-  SECURITY_INIT
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-  . = ALIGN(4096);
-  __initramfs_start =.;
-  .init.ramfs : { *(.init.ramfs) }
-  __initramfs_end = .;
-#endif
-
-  PERCPU(4096)
-
+  PERCPU(PAGE_SIZE)
 
   /* We need this dummy segment here */
 
@@ -252,16 +210,11 @@
 		  .DoubleExceptionVector.literal)
 
   . = (LOADADDR( .DoubleExceptionVector.text ) + SIZEOF( .DoubleExceptionVector.text ) + 3) & ~ 3;
-  . = ALIGN(1 << 12);
+  . = ALIGN(PAGE_SIZE);
 
   __init_end = .;
 
-  . = ALIGN(8192);
-
-  /* BSS section */
-  _bss_start = .;
-  .bss : { *(.bss.page_aligned) *(.bss) }
-  _bss_end = .;
+  BSS_SECTION(0, 8192, 0)
 
   _end = .;
 
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index 6593ab3..8873b9b 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -350,6 +350,7 @@
 
 	if (bio->bi_private)
 		complete(bio->bi_private);
+	__free_page(bio_page(bio));
 
 	bio_put(bio);
 }
@@ -372,30 +373,50 @@
 	struct request_queue *q = bdev_get_queue(bdev);
 	int type = flags & DISCARD_FL_BARRIER ?
 		DISCARD_BARRIER : DISCARD_NOBARRIER;
+	struct bio *bio;
+	struct page *page;
 	int ret = 0;
 
 	if (!q)
 		return -ENXIO;
 
-	if (!q->prepare_discard_fn)
+	if (!blk_queue_discard(q))
 		return -EOPNOTSUPP;
 
 	while (nr_sects && !ret) {
-		struct bio *bio = bio_alloc(gfp_mask, 0);
-		if (!bio)
-			return -ENOMEM;
+		unsigned int sector_size = q->limits.logical_block_size;
+		unsigned int max_discard_sectors =
+			min(q->limits.max_discard_sectors, UINT_MAX >> 9);
 
+		bio = bio_alloc(gfp_mask, 1);
+		if (!bio)
+			goto out;
+		bio->bi_sector = sector;
 		bio->bi_end_io = blkdev_discard_end_io;
 		bio->bi_bdev = bdev;
 		if (flags & DISCARD_FL_WAIT)
 			bio->bi_private = &wait;
 
-		bio->bi_sector = sector;
+		/*
+		 * Add a zeroed one-sector payload as that's what
+		 * our current implementations need.  If we'll ever need
+		 * more the interface will need revisiting.
+		 */
+		page = alloc_page(GFP_KERNEL | __GFP_ZERO);
+		if (!page)
+			goto out_free_bio;
+		if (bio_add_pc_page(q, bio, page, sector_size, 0) < sector_size)
+			goto out_free_page;
 
-		if (nr_sects > queue_max_hw_sectors(q)) {
-			bio->bi_size = queue_max_hw_sectors(q) << 9;
-			nr_sects -= queue_max_hw_sectors(q);
-			sector += queue_max_hw_sectors(q);
+		/*
+		 * And override the bio size - the way discard works we
+		 * touch many more blocks on disk than the actual payload
+		 * length.
+		 */
+		if (nr_sects > max_discard_sectors) {
+			bio->bi_size = max_discard_sectors << 9;
+			nr_sects -= max_discard_sectors;
+			sector += max_discard_sectors;
 		} else {
 			bio->bi_size = nr_sects << 9;
 			nr_sects = 0;
@@ -414,5 +435,11 @@
 		bio_put(bio);
 	}
 	return ret;
+out_free_page:
+	__free_page(page);
+out_free_bio:
+	bio_put(bio);
+out:
+	return -ENOMEM;
 }
 EXPORT_SYMBOL(blkdev_issue_discard);
diff --git a/block/blk-core.c b/block/blk-core.c
index 8135228..81f3431 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -34,6 +34,7 @@
 #include "blk.h"
 
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_remap);
+EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
 EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
 
 static int __make_request(struct request_queue *q, struct bio *bio);
@@ -69,7 +70,7 @@
 		part_stat_inc(cpu, part, merges[rw]);
 	else {
 		part_round_stats(cpu, part);
-		part_inc_in_flight(part, rw);
+		part_inc_in_flight(part);
 	}
 
 	part_stat_unlock();
@@ -1031,7 +1032,7 @@
 
 	if (part->in_flight) {
 		__part_stat_add(cpu, part, time_in_queue,
-				part_in_flight(part) * (now - part->stamp));
+				part->in_flight * (now - part->stamp));
 		__part_stat_add(cpu, part, io_ticks, (now - part->stamp));
 	}
 	part->stamp = now;
@@ -1124,7 +1125,6 @@
 		req->cmd_flags |= REQ_DISCARD;
 		if (bio_rw_flagged(bio, BIO_RW_BARRIER))
 			req->cmd_flags |= REQ_SOFTBARRIER;
-		req->q->prepare_discard_fn(req->q, req);
 	} else if (unlikely(bio_rw_flagged(bio, BIO_RW_BARRIER)))
 		req->cmd_flags |= REQ_HARDBARRIER;
 
@@ -1437,7 +1437,8 @@
 			goto end_io;
 		}
 
-		if (unlikely(nr_sectors > queue_max_hw_sectors(q))) {
+		if (unlikely(!bio_rw_flagged(bio, BIO_RW_DISCARD) &&
+			     nr_sectors > queue_max_hw_sectors(q))) {
 			printk(KERN_ERR "bio too big device %s (%u > %u)\n",
 			       bdevname(bio->bi_bdev, b),
 			       bio_sectors(bio),
@@ -1470,7 +1471,7 @@
 			goto end_io;
 
 		if (bio_rw_flagged(bio, BIO_RW_DISCARD) &&
-		    !q->prepare_discard_fn) {
+		    !blk_queue_discard(q)) {
 			err = -EOPNOTSUPP;
 			goto end_io;
 		}
@@ -1738,7 +1739,7 @@
 		part_stat_inc(cpu, part, ios[rw]);
 		part_stat_add(cpu, part, ticks[rw], duration);
 		part_round_stats(cpu, part);
-		part_dec_in_flight(part, rw);
+		part_dec_in_flight(part);
 
 		part_stat_unlock();
 	}
@@ -2491,6 +2492,14 @@
 }
 EXPORT_SYMBOL(kblockd_schedule_work);
 
+int kblockd_schedule_delayed_work(struct request_queue *q,
+				  struct delayed_work *work,
+				  unsigned long delay)
+{
+	return queue_delayed_work(kblockd_workqueue, work, delay);
+}
+EXPORT_SYMBOL(kblockd_schedule_delayed_work);
+
 int __init blk_dev_init(void)
 {
 	BUILD_BUG_ON(__REQ_NR_BITS > 8 *
diff --git a/block/blk-merge.c b/block/blk-merge.c
index 99cb5cf..b0de857 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -351,7 +351,7 @@
 		part = disk_map_sector_rcu(req->rq_disk, blk_rq_pos(req));
 
 		part_round_stats(cpu, part);
-		part_dec_in_flight(part, rq_data_dir(req));
+		part_dec_in_flight(part);
 
 		part_stat_unlock();
 	}
diff --git a/block/blk-settings.c b/block/blk-settings.c
index 83413ff..e0695bc 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -34,23 +34,6 @@
 EXPORT_SYMBOL(blk_queue_prep_rq);
 
 /**
- * blk_queue_set_discard - set a discard_sectors function for queue
- * @q:		queue
- * @dfn:	prepare_discard function
- *
- * It's possible for a queue to register a discard callback which is used
- * to transform a discard request into the appropriate type for the
- * hardware. If none is registered, then discard requests are failed
- * with %EOPNOTSUPP.
- *
- */
-void blk_queue_set_discard(struct request_queue *q, prepare_discard_fn *dfn)
-{
-	q->prepare_discard_fn = dfn;
-}
-EXPORT_SYMBOL(blk_queue_set_discard);
-
-/**
  * blk_queue_merge_bvec - set a merge_bvec function for queue
  * @q:		queue
  * @mbfn:	merge_bvec_fn
@@ -111,7 +94,9 @@
 	lim->max_hw_segments = MAX_HW_SEGMENTS;
 	lim->seg_boundary_mask = BLK_SEG_BOUNDARY_MASK;
 	lim->max_segment_size = MAX_SEGMENT_SIZE;
-	lim->max_sectors = lim->max_hw_sectors = SAFE_MAX_SECTORS;
+	lim->max_sectors = BLK_DEF_MAX_SECTORS;
+	lim->max_hw_sectors = INT_MAX;
+	lim->max_discard_sectors = SAFE_MAX_SECTORS;
 	lim->logical_block_size = lim->physical_block_size = lim->io_min = 512;
 	lim->bounce_pfn = (unsigned long)(BLK_BOUNCE_ANY >> PAGE_SHIFT);
 	lim->alignment_offset = 0;
@@ -164,6 +149,7 @@
 	q->unplug_timer.data = (unsigned long)q;
 
 	blk_set_default_limits(&q->limits);
+	blk_queue_max_sectors(q, SAFE_MAX_SECTORS);
 
 	/*
 	 * If the caller didn't supply a lock, fall back to our embedded
@@ -254,6 +240,18 @@
 EXPORT_SYMBOL(blk_queue_max_hw_sectors);
 
 /**
+ * blk_queue_max_discard_sectors - set max sectors for a single discard
+ * @q:  the request queue for the device
+ * @max_discard: maximum number of sectors to discard
+ **/
+void blk_queue_max_discard_sectors(struct request_queue *q,
+		unsigned int max_discard_sectors)
+{
+	q->limits.max_discard_sectors = max_discard_sectors;
+}
+EXPORT_SYMBOL(blk_queue_max_discard_sectors);
+
+/**
  * blk_queue_max_phys_segments - set max phys segments for a request for this queue
  * @q:  the request queue for the device
  * @max_segments:  max number of segments
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index b78c9c3..8a6d81a 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -452,6 +452,7 @@
 	if (ret) {
 		kobject_uevent(&q->kobj, KOBJ_REMOVE);
 		kobject_del(&q->kobj);
+		blk_trace_remove_sysfs(disk_to_dev(disk));
 		return ret;
 	}
 
@@ -465,11 +466,11 @@
 	if (WARN_ON(!q))
 		return;
 
-	if (q->request_fn) {
+	if (q->request_fn)
 		elv_unregister_queue(q);
 
-		kobject_uevent(&q->kobj, KOBJ_REMOVE);
-		kobject_del(&q->kobj);
-		kobject_put(&disk_to_dev(disk)->kobj);
-	}
+	kobject_uevent(&q->kobj, KOBJ_REMOVE);
+	kobject_del(&q->kobj);
+	blk_trace_remove_sysfs(disk_to_dev(disk));
+	kobject_put(&disk_to_dev(disk)->kobj);
 }
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 1ca813b..9c4b679 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -150,7 +150,7 @@
 	 * idle window management
 	 */
 	struct timer_list idle_slice_timer;
-	struct work_struct unplug_work;
+	struct delayed_work unplug_work;
 
 	struct cfq_queue *active_queue;
 	struct cfq_io_context *active_cic;
@@ -173,6 +173,7 @@
 	unsigned int cfq_slice[2];
 	unsigned int cfq_slice_async_rq;
 	unsigned int cfq_slice_idle;
+	unsigned int cfq_latency;
 
 	struct list_head cic_list;
 
@@ -180,6 +181,8 @@
 	 * Fallback dummy cfqq for extreme OOM conditions
 	 */
 	struct cfq_queue oom_cfqq;
+
+	unsigned long last_end_sync_rq;
 };
 
 enum cfqq_state_flags {
@@ -265,11 +268,13 @@
  * scheduler run of queue, if there are requests pending and no one in the
  * driver that will restart queueing
  */
-static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
+static inline void cfq_schedule_dispatch(struct cfq_data *cfqd,
+					 unsigned long delay)
 {
 	if (cfqd->busy_queues) {
 		cfq_log(cfqd, "schedule dispatch");
-		kblockd_schedule_work(cfqd->queue, &cfqd->unplug_work);
+		kblockd_schedule_delayed_work(cfqd->queue, &cfqd->unplug_work,
+						delay);
 	}
 }
 
@@ -1326,13 +1331,31 @@
 			return 0;
 
 		/*
-		 * we are the only queue, allow up to 4 times of 'quantum'
+		 * Sole queue user, allow bigger slice
 		 */
-		if (cfqq->dispatched >= 4 * max_dispatch)
-			return 0;
+		max_dispatch *= 4;
 	}
 
 	/*
+	 * Async queues must wait a bit before being allowed dispatch.
+	 * We also ramp up the dispatch depth gradually for async IO,
+	 * based on the last sync IO we serviced
+	 */
+	if (!cfq_cfqq_sync(cfqq) && cfqd->cfq_latency) {
+		unsigned long last_sync = jiffies - cfqd->last_end_sync_rq;
+		unsigned int depth;
+
+		depth = last_sync / cfqd->cfq_slice[1];
+		if (!depth && !cfqq->dispatched)
+			depth = 1;
+		if (depth < max_dispatch)
+			max_dispatch = depth;
+	}
+
+	if (cfqq->dispatched >= max_dispatch)
+		return 0;
+
+	/*
 	 * Dispatch a request from this cfqq
 	 */
 	cfq_dispatch_request(cfqd, cfqq);
@@ -1376,7 +1399,7 @@
 
 	if (unlikely(cfqd->active_queue == cfqq)) {
 		__cfq_slice_expired(cfqd, cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
+		cfq_schedule_dispatch(cfqd, 0);
 	}
 
 	kmem_cache_free(cfq_pool, cfqq);
@@ -1471,7 +1494,7 @@
 {
 	if (unlikely(cfqq == cfqd->active_queue)) {
 		__cfq_slice_expired(cfqd, cfqq, 0);
-		cfq_schedule_dispatch(cfqd);
+		cfq_schedule_dispatch(cfqd, 0);
 	}
 
 	cfq_put_queue(cfqq);
@@ -1951,7 +1974,7 @@
 	enable_idle = old_idle = cfq_cfqq_idle_window(cfqq);
 
 	if (!atomic_read(&cic->ioc->nr_tasks) || !cfqd->cfq_slice_idle ||
-	    (cfqd->hw_tag && CIC_SEEKY(cic)))
+	    (!cfqd->cfq_latency && cfqd->hw_tag && CIC_SEEKY(cic)))
 		enable_idle = 0;
 	else if (sample_valid(cic->ttime_samples)) {
 		if (cic->ttime_mean > cfqd->cfq_slice_idle)
@@ -2157,8 +2180,10 @@
 	if (cfq_cfqq_sync(cfqq))
 		cfqd->sync_flight--;
 
-	if (sync)
+	if (sync) {
 		RQ_CIC(rq)->last_end_request = now;
+		cfqd->last_end_sync_rq = now;
+	}
 
 	/*
 	 * If this is the active queue, check if it needs to be expired,
@@ -2186,7 +2211,7 @@
 	}
 
 	if (!rq_in_driver(cfqd))
-		cfq_schedule_dispatch(cfqd);
+		cfq_schedule_dispatch(cfqd, 0);
 }
 
 /*
@@ -2316,7 +2341,7 @@
 	if (cic)
 		put_io_context(cic->ioc);
 
-	cfq_schedule_dispatch(cfqd);
+	cfq_schedule_dispatch(cfqd, 0);
 	spin_unlock_irqrestore(q->queue_lock, flags);
 	cfq_log(cfqd, "set_request fail");
 	return 1;
@@ -2325,7 +2350,7 @@
 static void cfq_kick_queue(struct work_struct *work)
 {
 	struct cfq_data *cfqd =
-		container_of(work, struct cfq_data, unplug_work);
+		container_of(work, struct cfq_data, unplug_work.work);
 	struct request_queue *q = cfqd->queue;
 
 	spin_lock_irq(q->queue_lock);
@@ -2379,7 +2404,7 @@
 expire:
 	cfq_slice_expired(cfqd, timed_out);
 out_kick:
-	cfq_schedule_dispatch(cfqd);
+	cfq_schedule_dispatch(cfqd, 0);
 out_cont:
 	spin_unlock_irqrestore(cfqd->queue->queue_lock, flags);
 }
@@ -2387,7 +2412,7 @@
 static void cfq_shutdown_timer_wq(struct cfq_data *cfqd)
 {
 	del_timer_sync(&cfqd->idle_slice_timer);
-	cancel_work_sync(&cfqd->unplug_work);
+	cancel_delayed_work_sync(&cfqd->unplug_work);
 }
 
 static void cfq_put_async_queues(struct cfq_data *cfqd)
@@ -2469,7 +2494,7 @@
 	cfqd->idle_slice_timer.function = cfq_idle_slice_timer;
 	cfqd->idle_slice_timer.data = (unsigned long) cfqd;
 
-	INIT_WORK(&cfqd->unplug_work, cfq_kick_queue);
+	INIT_DELAYED_WORK(&cfqd->unplug_work, cfq_kick_queue);
 
 	cfqd->cfq_quantum = cfq_quantum;
 	cfqd->cfq_fifo_expire[0] = cfq_fifo_expire[0];
@@ -2480,8 +2505,9 @@
 	cfqd->cfq_slice[1] = cfq_slice_sync;
 	cfqd->cfq_slice_async_rq = cfq_slice_async_rq;
 	cfqd->cfq_slice_idle = cfq_slice_idle;
+	cfqd->cfq_latency = 1;
 	cfqd->hw_tag = 1;
-
+	cfqd->last_end_sync_rq = jiffies;
 	return cfqd;
 }
 
@@ -2549,6 +2575,7 @@
 SHOW_FUNCTION(cfq_slice_sync_show, cfqd->cfq_slice[1], 1);
 SHOW_FUNCTION(cfq_slice_async_show, cfqd->cfq_slice[0], 1);
 SHOW_FUNCTION(cfq_slice_async_rq_show, cfqd->cfq_slice_async_rq, 0);
+SHOW_FUNCTION(cfq_low_latency_show, cfqd->cfq_latency, 0);
 #undef SHOW_FUNCTION
 
 #define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV)			\
@@ -2580,6 +2607,7 @@
 STORE_FUNCTION(cfq_slice_async_store, &cfqd->cfq_slice[0], 1, UINT_MAX, 1);
 STORE_FUNCTION(cfq_slice_async_rq_store, &cfqd->cfq_slice_async_rq, 1,
 		UINT_MAX, 0);
+STORE_FUNCTION(cfq_low_latency_store, &cfqd->cfq_latency, 0, 1, 0);
 #undef STORE_FUNCTION
 
 #define CFQ_ATTR(name) \
@@ -2595,6 +2623,7 @@
 	CFQ_ATTR(slice_async),
 	CFQ_ATTR(slice_async_rq),
 	CFQ_ATTR(slice_idle),
+	CFQ_ATTR(low_latency),
 	__ATTR_NULL
 };
 
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index 7865a34..9bd086c 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -21,6 +21,11 @@
 	return put_user(val, (compat_int_t __user *)compat_ptr(arg));
 }
 
+static int compat_put_uint(unsigned long arg, unsigned int val)
+{
+	return put_user(val, (compat_uint_t __user *)compat_ptr(arg));
+}
+
 static int compat_put_long(unsigned long arg, long val)
 {
 	return put_user(val, (compat_long_t __user *)compat_ptr(arg));
@@ -734,6 +739,14 @@
 	switch (cmd) {
 	case HDIO_GETGEO:
 		return compat_hdio_getgeo(disk, bdev, compat_ptr(arg));
+	case BLKPBSZGET:
+		return compat_put_uint(arg, bdev_physical_block_size(bdev));
+	case BLKIOMIN:
+		return compat_put_uint(arg, bdev_io_min(bdev));
+	case BLKIOOPT:
+		return compat_put_uint(arg, bdev_io_opt(bdev));
+	case BLKALIGNOFF:
+		return compat_put_int(arg, bdev_alignment_offset(bdev));
 	case BLKFLSBUF:
 	case BLKROSET:
 	case BLKDISCARD:
diff --git a/block/genhd.c b/block/genhd.c
index 517e433..5a0861d 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -869,7 +869,6 @@
 static DEVICE_ATTR(alignment_offset, S_IRUGO, disk_alignment_offset_show, NULL);
 static DEVICE_ATTR(capability, S_IRUGO, disk_capability_show, NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
-static DEVICE_ATTR(inflight, S_IRUGO, part_inflight_show, NULL);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 static struct device_attribute dev_attr_fail =
 	__ATTR(make-it-fail, S_IRUGO|S_IWUSR, part_fail_show, part_fail_store);
@@ -889,7 +888,6 @@
 	&dev_attr_alignment_offset.attr,
 	&dev_attr_capability.attr,
 	&dev_attr_stat.attr,
-	&dev_attr_inflight.attr,
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 	&dev_attr_fail.attr,
 #endif
@@ -1055,7 +1053,7 @@
 			   part_stat_read(hd, merges[1]),
 			   (unsigned long long)part_stat_read(hd, sectors[1]),
 			   jiffies_to_msecs(part_stat_read(hd, ticks[1])),
-			   part_in_flight(hd),
+			   hd->in_flight,
 			   jiffies_to_msecs(part_stat_read(hd, io_ticks)),
 			   jiffies_to_msecs(part_stat_read(hd, time_in_queue))
 			);
diff --git a/block/ioctl.c b/block/ioctl.c
index d3e6b58..1f4d1de 100644
--- a/block/ioctl.c
+++ b/block/ioctl.c
@@ -138,6 +138,11 @@
 	return put_user(val, (int __user *)arg);
 }
 
+static int put_uint(unsigned long arg, unsigned int val)
+{
+	return put_user(val, (unsigned int __user *)arg);
+}
+
 static int put_long(unsigned long arg, long val)
 {
 	return put_user(val, (long __user *)arg);
@@ -263,10 +268,18 @@
 		return put_long(arg, (bdi->ra_pages * PAGE_CACHE_SIZE) / 512);
 	case BLKROGET:
 		return put_int(arg, bdev_read_only(bdev) != 0);
-	case BLKBSZGET: /* get the logical block size (cf. BLKSSZGET) */
+	case BLKBSZGET: /* get block device soft block size (cf. BLKSSZGET) */
 		return put_int(arg, block_size(bdev));
-	case BLKSSZGET: /* get block device hardware sector size */
+	case BLKSSZGET: /* get block device logical block size */
 		return put_int(arg, bdev_logical_block_size(bdev));
+	case BLKPBSZGET: /* get block device physical block size */
+		return put_uint(arg, bdev_physical_block_size(bdev));
+	case BLKIOMIN:
+		return put_uint(arg, bdev_io_min(bdev));
+	case BLKIOOPT:
+		return put_uint(arg, bdev_io_opt(bdev));
+	case BLKALIGNOFF:
+		return put_int(arg, bdev_alignment_offset(bdev));
 	case BLKSECTGET:
 		return put_ushort(arg, queue_max_sectors(bdev_get_queue(bdev)));
 	case BLKRASET:
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig
index dd8729d..0ed42d8 100644
--- a/drivers/acpi/Kconfig
+++ b/drivers/acpi/Kconfig
@@ -211,6 +211,18 @@
 	select ACPI_CONTAINER
 	default y
 
+config ACPI_PROCESSOR_AGGREGATOR
+	tristate "Processor Aggregator"
+	depends on ACPI_PROCESSOR
+	depends on EXPERIMENTAL
+	depends on X86
+	help
+	  ACPI 4.0 defines processor Aggregator, which enables OS to perform
+	  specfic processor configuration and control that applies to all
+	  processors in the platform. Currently only logical processor idling
+	  is defined, which is to reduce power consumption. This driver
+	  support the new device.
+
 config ACPI_THERMAL
 	tristate "Thermal Zone"
 	depends on ACPI_PROCESSOR
diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile
index 82cd49d..7702118 100644
--- a/drivers/acpi/Makefile
+++ b/drivers/acpi/Makefile
@@ -62,3 +62,5 @@
 processor-y			:= processor_core.o processor_throttling.o
 processor-y			+= processor_idle.o processor_thermal.o
 processor-$(CONFIG_CPU_FREQ)	+= processor_perflib.o
+
+obj-$(CONFIG_ACPI_PROCESSOR_AGGREGATOR) += acpi_pad.o
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
new file mode 100644
index 0000000..0d2cdb8
--- /dev/null
+++ b/drivers/acpi/acpi_pad.c
@@ -0,0 +1,514 @@
+/*
+ * acpi_pad.c ACPI Processor Aggregator Driver
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpumask.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/cpu.h>
+#include <linux/clockchips.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+
+#define ACPI_PROCESSOR_AGGREGATOR_CLASS	"processor_aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME "Processor Aggregator"
+#define ACPI_PROCESSOR_AGGREGATOR_NOTIFY 0x80
+static DEFINE_MUTEX(isolated_cpus_lock);
+
+#define MWAIT_SUBSTATE_MASK	(0xf)
+#define MWAIT_CSTATE_MASK	(0xf)
+#define MWAIT_SUBSTATE_SIZE	(4)
+#define CPUID_MWAIT_LEAF (5)
+#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1)
+#define CPUID5_ECX_INTERRUPT_BREAK	(0x2)
+static unsigned long power_saving_mwait_eax;
+static void power_saving_mwait_init(void)
+{
+	unsigned int eax, ebx, ecx, edx;
+	unsigned int highest_cstate = 0;
+	unsigned int highest_subcstate = 0;
+	int i;
+
+	if (!boot_cpu_has(X86_FEATURE_MWAIT))
+		return;
+	if (boot_cpu_data.cpuid_level < CPUID_MWAIT_LEAF)
+		return;
+
+	cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx);
+
+	if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) ||
+	    !(ecx & CPUID5_ECX_INTERRUPT_BREAK))
+		return;
+
+	edx >>= MWAIT_SUBSTATE_SIZE;
+	for (i = 0; i < 7 && edx; i++, edx >>= MWAIT_SUBSTATE_SIZE) {
+		if (edx & MWAIT_SUBSTATE_MASK) {
+			highest_cstate = i;
+			highest_subcstate = edx & MWAIT_SUBSTATE_MASK;
+		}
+	}
+	power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) |
+		(highest_subcstate - 1);
+
+	for_each_online_cpu(i)
+		clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i);
+
+#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86)
+	switch (boot_cpu_data.x86_vendor) {
+	case X86_VENDOR_AMD:
+	case X86_VENDOR_INTEL:
+		/*
+		 * AMD Fam10h TSC will tick in all
+		 * C/P/S0/S1 states when this bit is set.
+		 */
+		if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
+			return;
+
+		/*FALL THROUGH*/
+	default:
+		/* TSC could halt in idle, so notify users */
+		mark_tsc_unstable("TSC halts in idle");
+	}
+#endif
+}
+
+static unsigned long cpu_weight[NR_CPUS];
+static int tsk_in_cpu[NR_CPUS] = {[0 ... NR_CPUS-1] = -1};
+static DECLARE_BITMAP(pad_busy_cpus_bits, NR_CPUS);
+static void round_robin_cpu(unsigned int tsk_index)
+{
+	struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+	cpumask_var_t tmp;
+	int cpu;
+	unsigned long min_weight = -1, preferred_cpu;
+
+	if (!alloc_cpumask_var(&tmp, GFP_KERNEL))
+		return;
+
+	mutex_lock(&isolated_cpus_lock);
+	cpumask_clear(tmp);
+	for_each_cpu(cpu, pad_busy_cpus)
+		cpumask_or(tmp, tmp, topology_thread_cpumask(cpu));
+	cpumask_andnot(tmp, cpu_online_mask, tmp);
+	/* avoid HT sibilings if possible */
+	if (cpumask_empty(tmp))
+		cpumask_andnot(tmp, cpu_online_mask, pad_busy_cpus);
+	if (cpumask_empty(tmp)) {
+		mutex_unlock(&isolated_cpus_lock);
+		return;
+	}
+	for_each_cpu(cpu, tmp) {
+		if (cpu_weight[cpu] < min_weight) {
+			min_weight = cpu_weight[cpu];
+			preferred_cpu = cpu;
+		}
+	}
+
+	if (tsk_in_cpu[tsk_index] != -1)
+		cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+	tsk_in_cpu[tsk_index] = preferred_cpu;
+	cpumask_set_cpu(preferred_cpu, pad_busy_cpus);
+	cpu_weight[preferred_cpu]++;
+	mutex_unlock(&isolated_cpus_lock);
+
+	set_cpus_allowed_ptr(current, cpumask_of(preferred_cpu));
+}
+
+static void exit_round_robin(unsigned int tsk_index)
+{
+	struct cpumask *pad_busy_cpus = to_cpumask(pad_busy_cpus_bits);
+	cpumask_clear_cpu(tsk_in_cpu[tsk_index], pad_busy_cpus);
+	tsk_in_cpu[tsk_index] = -1;
+}
+
+static unsigned int idle_pct = 5; /* percentage */
+static unsigned int round_robin_time = 10; /* second */
+static int power_saving_thread(void *data)
+{
+	struct sched_param param = {.sched_priority = 1};
+	int do_sleep;
+	unsigned int tsk_index = (unsigned long)data;
+	u64 last_jiffies = 0;
+
+	sched_setscheduler(current, SCHED_RR, &param);
+
+	while (!kthread_should_stop()) {
+		int cpu;
+		u64 expire_time;
+
+		try_to_freeze();
+
+		/* round robin to cpus */
+		if (last_jiffies + round_robin_time * HZ < jiffies) {
+			last_jiffies = jiffies;
+			round_robin_cpu(tsk_index);
+		}
+
+		do_sleep = 0;
+
+		current_thread_info()->status &= ~TS_POLLING;
+		/*
+		 * TS_POLLING-cleared state must be visible before we test
+		 * NEED_RESCHED:
+		 */
+		smp_mb();
+
+		expire_time = jiffies + HZ * (100 - idle_pct) / 100;
+
+		while (!need_resched()) {
+			local_irq_disable();
+			cpu = smp_processor_id();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER,
+				&cpu);
+			stop_critical_timings();
+
+			__monitor((void *)&current_thread_info()->flags, 0, 0);
+			smp_mb();
+			if (!need_resched())
+				__mwait(power_saving_mwait_eax, 1);
+
+			start_critical_timings();
+			clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT,
+				&cpu);
+			local_irq_enable();
+
+			if (jiffies > expire_time) {
+				do_sleep = 1;
+				break;
+			}
+		}
+
+		current_thread_info()->status |= TS_POLLING;
+
+		/*
+		 * current sched_rt has threshold for rt task running time.
+		 * When a rt task uses 95% CPU time, the rt thread will be
+		 * scheduled out for 5% CPU time to not starve other tasks. But
+		 * the mechanism only works when all CPUs have RT task running,
+		 * as if one CPU hasn't RT task, RT task from other CPUs will
+		 * borrow CPU time from this CPU and cause RT task use > 95%
+		 * CPU time. To make 'avoid staration' work, takes a nap here.
+		 */
+		if (do_sleep)
+			schedule_timeout_killable(HZ * idle_pct / 100);
+	}
+
+	exit_round_robin(tsk_index);
+	return 0;
+}
+
+static struct task_struct *ps_tsks[NR_CPUS];
+static unsigned int ps_tsk_num;
+static int create_power_saving_task(void)
+{
+	ps_tsks[ps_tsk_num] = kthread_run(power_saving_thread,
+		(void *)(unsigned long)ps_tsk_num,
+		"power_saving/%d", ps_tsk_num);
+	if (ps_tsks[ps_tsk_num]) {
+		ps_tsk_num++;
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static void destroy_power_saving_task(void)
+{
+	if (ps_tsk_num > 0) {
+		ps_tsk_num--;
+		kthread_stop(ps_tsks[ps_tsk_num]);
+	}
+}
+
+static void set_power_saving_task_num(unsigned int num)
+{
+	if (num > ps_tsk_num) {
+		while (ps_tsk_num < num) {
+			if (create_power_saving_task())
+				return;
+		}
+	} else if (num < ps_tsk_num) {
+		while (ps_tsk_num > num)
+			destroy_power_saving_task();
+	}
+}
+
+static int acpi_pad_idle_cpus(unsigned int num_cpus)
+{
+	get_online_cpus();
+
+	num_cpus = min_t(unsigned int, num_cpus, num_online_cpus());
+	set_power_saving_task_num(num_cpus);
+
+	put_online_cpus();
+	return 0;
+}
+
+static uint32_t acpi_pad_idle_cpus_num(void)
+{
+	return ps_tsk_num;
+}
+
+static ssize_t acpi_pad_rrtime_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	if (num < 1 || num >= 100)
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	round_robin_time = num;
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_rrtime_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d", round_robin_time);
+}
+static DEVICE_ATTR(rrtime, S_IRUGO|S_IWUSR,
+	acpi_pad_rrtime_show,
+	acpi_pad_rrtime_store);
+
+static ssize_t acpi_pad_idlepct_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	if (num < 1 || num >= 100)
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	idle_pct = num;
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_idlepct_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%d", idle_pct);
+}
+static DEVICE_ATTR(idlepct, S_IRUGO|S_IWUSR,
+	acpi_pad_idlepct_show,
+	acpi_pad_idlepct_store);
+
+static ssize_t acpi_pad_idlecpus_store(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t count)
+{
+	unsigned long num;
+	if (strict_strtoul(buf, 0, &num))
+		return -EINVAL;
+	mutex_lock(&isolated_cpus_lock);
+	acpi_pad_idle_cpus(num);
+	mutex_unlock(&isolated_cpus_lock);
+	return count;
+}
+
+static ssize_t acpi_pad_idlecpus_show(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	return cpumask_scnprintf(buf, PAGE_SIZE,
+		to_cpumask(pad_busy_cpus_bits));
+}
+static DEVICE_ATTR(idlecpus, S_IRUGO|S_IWUSR,
+	acpi_pad_idlecpus_show,
+	acpi_pad_idlecpus_store);
+
+static int acpi_pad_add_sysfs(struct acpi_device *device)
+{
+	int result;
+
+	result = device_create_file(&device->dev, &dev_attr_idlecpus);
+	if (result)
+		return -ENODEV;
+	result = device_create_file(&device->dev, &dev_attr_idlepct);
+	if (result) {
+		device_remove_file(&device->dev, &dev_attr_idlecpus);
+		return -ENODEV;
+	}
+	result = device_create_file(&device->dev, &dev_attr_rrtime);
+	if (result) {
+		device_remove_file(&device->dev, &dev_attr_idlecpus);
+		device_remove_file(&device->dev, &dev_attr_idlepct);
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static void acpi_pad_remove_sysfs(struct acpi_device *device)
+{
+	device_remove_file(&device->dev, &dev_attr_idlecpus);
+	device_remove_file(&device->dev, &dev_attr_idlepct);
+	device_remove_file(&device->dev, &dev_attr_rrtime);
+}
+
+/* Query firmware how many CPUs should be idle */
+static int acpi_pad_pur(acpi_handle handle, int *num_cpus)
+{
+	struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+	acpi_status status;
+	union acpi_object *package;
+	int rev, num, ret = -EINVAL;
+
+	status = acpi_evaluate_object(handle, "_PUR", NULL, &buffer);
+	if (ACPI_FAILURE(status))
+		return -EINVAL;
+	package = buffer.pointer;
+	if (package->type != ACPI_TYPE_PACKAGE || package->package.count != 2)
+		goto out;
+	rev = package->package.elements[0].integer.value;
+	num = package->package.elements[1].integer.value;
+	if (rev != 1)
+		goto out;
+	*num_cpus = num;
+	ret = 0;
+out:
+	kfree(buffer.pointer);
+	return ret;
+}
+
+/* Notify firmware how many CPUs are idle */
+static void acpi_pad_ost(acpi_handle handle, int stat,
+	uint32_t idle_cpus)
+{
+	union acpi_object params[3] = {
+		{.type = ACPI_TYPE_INTEGER,},
+		{.type = ACPI_TYPE_INTEGER,},
+		{.type = ACPI_TYPE_BUFFER,},
+	};
+	struct acpi_object_list arg_list = {3, params};
+
+	params[0].integer.value = ACPI_PROCESSOR_AGGREGATOR_NOTIFY;
+	params[1].integer.value =  stat;
+	params[2].buffer.length = 4;
+	params[2].buffer.pointer = (void *)&idle_cpus;
+	acpi_evaluate_object(handle, "_OST", &arg_list, NULL);
+}
+
+static void acpi_pad_handle_notify(acpi_handle handle)
+{
+	int num_cpus, ret;
+	uint32_t idle_cpus;
+
+	mutex_lock(&isolated_cpus_lock);
+	if (acpi_pad_pur(handle, &num_cpus)) {
+		mutex_unlock(&isolated_cpus_lock);
+		return;
+	}
+	ret = acpi_pad_idle_cpus(num_cpus);
+	idle_cpus = acpi_pad_idle_cpus_num();
+	if (!ret)
+		acpi_pad_ost(handle, 0, idle_cpus);
+	else
+		acpi_pad_ost(handle, 1, 0);
+	mutex_unlock(&isolated_cpus_lock);
+}
+
+static void acpi_pad_notify(acpi_handle handle, u32 event,
+	void *data)
+{
+	struct acpi_device *device = data;
+
+	switch (event) {
+	case ACPI_PROCESSOR_AGGREGATOR_NOTIFY:
+		acpi_pad_handle_notify(handle);
+		acpi_bus_generate_proc_event(device, event, 0);
+		acpi_bus_generate_netlink_event(device->pnp.device_class,
+			dev_name(&device->dev), event, 0);
+		break;
+	default:
+		printk(KERN_WARNING"Unsupported event [0x%x]\n", event);
+		break;
+	}
+}
+
+static int acpi_pad_add(struct acpi_device *device)
+{
+	acpi_status status;
+
+	strcpy(acpi_device_name(device), ACPI_PROCESSOR_AGGREGATOR_DEVICE_NAME);
+	strcpy(acpi_device_class(device), ACPI_PROCESSOR_AGGREGATOR_CLASS);
+
+	if (acpi_pad_add_sysfs(device))
+		return -ENODEV;
+
+	status = acpi_install_notify_handler(device->handle,
+		ACPI_DEVICE_NOTIFY, acpi_pad_notify, device);
+	if (ACPI_FAILURE(status)) {
+		acpi_pad_remove_sysfs(device);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int acpi_pad_remove(struct acpi_device *device,
+	int type)
+{
+	mutex_lock(&isolated_cpus_lock);
+	acpi_pad_idle_cpus(0);
+	mutex_unlock(&isolated_cpus_lock);
+
+	acpi_remove_notify_handler(device->handle,
+		ACPI_DEVICE_NOTIFY, acpi_pad_notify);
+	acpi_pad_remove_sysfs(device);
+	return 0;
+}
+
+static const struct acpi_device_id pad_device_ids[] = {
+	{"ACPI000C", 0},
+	{"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, pad_device_ids);
+
+static struct acpi_driver acpi_pad_driver = {
+	.name = "processor_aggregator",
+	.class = ACPI_PROCESSOR_AGGREGATOR_CLASS,
+	.ids = pad_device_ids,
+	.ops = {
+		.add = acpi_pad_add,
+		.remove = acpi_pad_remove,
+	},
+};
+
+static int __init acpi_pad_init(void)
+{
+	power_saving_mwait_init();
+	if (power_saving_mwait_eax == 0)
+		return -EINVAL;
+
+	return acpi_bus_register_driver(&acpi_pad_driver);
+}
+
+static void __exit acpi_pad_exit(void)
+{
+	acpi_bus_unregister_driver(&acpi_pad_driver);
+}
+
+module_init(acpi_pad_init);
+module_exit(acpi_pad_exit);
+MODULE_AUTHOR("Shaohua Li<shaohua.li@intel.com>");
+MODULE_DESCRIPTION("ACPI Processor Aggregator Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index 135fbfe..7411915 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -94,36 +94,33 @@
 
 EXPORT_SYMBOL(acpi_bus_get_device);
 
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta)
+{
+	acpi_status status;
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, sta);
+	if (ACPI_SUCCESS(status))
+		return AE_OK;
+
+	if (status == AE_NOT_FOUND) {
+		*sta = ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
+		       ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+		return AE_OK;
+	}
+	return status;
+}
+
 int acpi_bus_get_status(struct acpi_device *device)
 {
-	acpi_status status = AE_OK;
-	unsigned long long sta = 0;
+	acpi_status status;
+	unsigned long long sta;
 
+	status = acpi_bus_get_status_handle(device->handle, &sta);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
-	if (!device)
-		return -EINVAL;
-
-	/*
-	 * Evaluate _STA if present.
-	 */
-	if (device->flags.dynamic_status) {
-		status =
-		    acpi_evaluate_integer(device->handle, "_STA", NULL, &sta);
-		if (ACPI_FAILURE(status))
-			return -ENODEV;
-		STRUCT_TO_INT(device->status) = (int)sta;
-	}
-
-	/*
-	 * According to ACPI spec some device can be present and functional
-	 * even if the parent is not present but functional.
-	 * In such conditions the child device should not inherit the status
-	 * from the parent.
-	 */
-	else
-		STRUCT_TO_INT(device->status) =
-		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
-		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
+	STRUCT_TO_INT(device->status) = (int) sta;
 
 	if (device->status.functional && !device->status.present) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]: "
@@ -135,10 +132,8 @@
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device [%s] status [%08x]\n",
 			  device->pnp.bus_id,
 			  (u32) STRUCT_TO_INT(device->status)));
-
 	return 0;
 }
-
 EXPORT_SYMBOL(acpi_bus_get_status);
 
 void acpi_bus_private_data_handler(acpi_handle handle,
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index 3a2cfef..7338b6a 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -67,7 +67,7 @@
 	struct list_head dependent_devices;
 	struct list_head hotplug_devices;
 
-	struct list_head sibiling;
+	struct list_head sibling;
 	struct platform_device *dock_device;
 };
 static LIST_HEAD(dock_stations);
@@ -275,7 +275,7 @@
 
 	if (is_dock(handle))
 		return 1;
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		if (find_dock_dependent_device(dock_station, handle))
 			return 1;
 	}
@@ -619,7 +619,7 @@
 	 * make sure this handle is for a device dependent on the dock,
 	 * this would include the dock station itself
 	 */
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		/*
 		 * An ATA bay can be in a dock and itself can be ejected
 		 * seperately, so there are two 'dock stations' which need the
@@ -651,7 +651,7 @@
 	if (!dock_station_count)
 		return;
 
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		dd = find_dock_dependent_device(dock_station, handle);
 		if (dd)
 			dock_del_hotplug_device(dock_station, dd);
@@ -787,7 +787,7 @@
 	if (event != ACPI_NOTIFY_BUS_CHECK && event != ACPI_NOTIFY_DEVICE_CHECK
 	   && event != ACPI_NOTIFY_EJECT_REQUEST)
 		return 0;
-	list_for_each_entry(dock_station, &dock_stations, sibiling) {
+	list_for_each_entry(dock_station, &dock_stations, sibling) {
 		if (dock_station->handle == handle) {
 			struct dock_data *dock_data;
 
@@ -958,7 +958,7 @@
 	dock_station->last_dock_time = jiffies - HZ;
 	INIT_LIST_HEAD(&dock_station->dependent_devices);
 	INIT_LIST_HEAD(&dock_station->hotplug_devices);
-	INIT_LIST_HEAD(&dock_station->sibiling);
+	INIT_LIST_HEAD(&dock_station->sibling);
 	spin_lock_init(&dock_station->dd_lock);
 	mutex_init(&dock_station->hp_lock);
 	ATOMIC_INIT_NOTIFIER_HEAD(&dock_notifier_list);
@@ -1044,7 +1044,7 @@
 	add_dock_dependent_device(dock_station, dd);
 
 	dock_station_count++;
-	list_add(&dock_station->sibiling, &dock_stations);
+	list_add(&dock_station->sibling, &dock_stations);
 	return 0;
 
 dock_add_err_unregister:
@@ -1149,7 +1149,7 @@
 	struct dock_station *tmp;
 
 	unregister_acpi_bus_notifier(&dock_acpi_notifier);
-	list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibiling)
+	list_for_each_entry_safe(dock_station, tmp, &dock_stations, sibling)
 		dock_remove(dock_station);
 }
 
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index f707960..baef28c 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -119,6 +119,8 @@
 } *boot_ec, *first_ec;
 
 static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */
+static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
+static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
 
 /* --------------------------------------------------------------------------
                              Transaction Management
@@ -232,10 +234,8 @@
 			}
 			advance_transaction(ec, acpi_ec_read_status(ec));
 		} while (time_before(jiffies, delay));
-		if (!ec->curr->irq_count ||
-		    (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF))
+		if (acpi_ec_read_status(ec) & ACPI_EC_FLAG_IBF)
 			break;
-		/* try restart command if we get any false interrupts */
 		pr_debug(PREFIX "controller reset, restart transaction\n");
 		spin_lock_irqsave(&ec->curr_lock, flags);
 		start_transaction(ec);
@@ -899,6 +899,44 @@
 	{"", 0},
 };
 
+/* Some BIOS do not survive early DSDT scan, skip it */
+static int ec_skip_dsdt_scan(const struct dmi_system_id *id)
+{
+	EC_FLAGS_SKIP_DSDT_SCAN = 1;
+	return 0;
+}
+
+/* ASUStek often supplies us with broken ECDT, validate it */
+static int ec_validate_ecdt(const struct dmi_system_id *id)
+{
+	EC_FLAGS_VALIDATE_ECDT = 1;
+	return 0;
+}
+
+/* MSI EC needs special treatment, enable it */
+static int ec_flag_msi(const struct dmi_system_id *id)
+{
+	EC_FLAGS_MSI = 1;
+	EC_FLAGS_VALIDATE_ECDT = 1;
+	return 0;
+}
+
+static struct dmi_system_id __initdata ec_dmi_table[] = {
+	{
+	ec_skip_dsdt_scan, "Compal JFL92", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "COMPAL"),
+	DMI_MATCH(DMI_BOARD_NAME, "JFL92") }, NULL},
+	{
+	ec_flag_msi, "MSI hardware", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "Micro-Star"),
+	DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star") }, NULL},
+	{
+	ec_validate_ecdt, "ASUS hardware", {
+	DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
+	{},
+};
+
+
 int __init acpi_ec_ecdt_probe(void)
 {
 	acpi_status status;
@@ -911,11 +949,7 @@
 	/*
 	 * Generate a boot ec context
 	 */
-	if (dmi_name_in_vendors("Micro-Star") ||
-	    dmi_name_in_vendors("Notebook")) {
-		pr_info(PREFIX "Enabling special treatment for EC from MSI.\n");
-		EC_FLAGS_MSI = 1;
-	}
+	dmi_check_system(ec_dmi_table);
 	status = acpi_get_table(ACPI_SIG_ECDT, 1,
 				(struct acpi_table_header **)&ecdt_ptr);
 	if (ACPI_SUCCESS(status)) {
@@ -926,7 +960,7 @@
 		boot_ec->handle = ACPI_ROOT_OBJECT;
 		acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
 		/* Don't trust ECDT, which comes from ASUSTek */
-		if (!dmi_name_in_vendors("ASUS") && EC_FLAGS_MSI == 0)
+		if (!EC_FLAGS_VALIDATE_ECDT)
 			goto install;
 		saved_ec = kmalloc(sizeof(struct acpi_ec), GFP_KERNEL);
 		if (!saved_ec)
@@ -934,6 +968,10 @@
 		memcpy(saved_ec, boot_ec, sizeof(struct acpi_ec));
 	/* fall through */
 	}
+
+	if (EC_FLAGS_SKIP_DSDT_SCAN)
+		return -ENODEV;
+
 	/* This workaround is needed only on some broken machines,
 	 * which require early EC, but fail to provide ECDT */
 	printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n");
diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c
index 5633b86..7c1c59e 100644
--- a/drivers/acpi/osl.c
+++ b/drivers/acpi/osl.c
@@ -1161,7 +1161,13 @@
 			       res_list_elem->name,
 			       (long long) res_list_elem->start,
 			       (long long) res_list_elem->end);
-			printk(KERN_INFO "ACPI: Device needs an ACPI driver\n");
+			if (acpi_enforce_resources == ENFORCE_RESOURCES_LAX)
+				printk(KERN_NOTICE "ACPI: This conflict may"
+				       " cause random problems and system"
+				       " instability\n");
+			printk(KERN_INFO "ACPI: If an ACPI driver is available"
+			       " for this device, you should use it instead of"
+			       " the native driver\n");
 		}
 		if (acpi_enforce_resources == ENFORCE_RESOURCES_STRICT)
 			return -EBUSY;
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index d0d550d..f8b6f55 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -398,6 +398,8 @@
 
 	if (len > 4)
 		len = 4;
+	if (len < 0)
+		return -EFAULT;
 
 	if (copy_from_user(strbuf, buffer, len))
 		return -EFAULT;
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index c2d4d6e..c567b46 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -863,13 +863,6 @@
 		goto err_remove_sysfs;
 	}
 
-	if (pr->flags.throttling) {
-		printk(KERN_INFO PREFIX "%s [%s] (supports",
-		       acpi_device_name(device), acpi_device_bid(device));
-		printk(" %d throttling states", pr->throttling.state_count);
-		printk(")\n");
-	}
-
 	return 0;
 
 err_remove_sysfs:
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index cc61a62..bbd066e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1166,7 +1166,6 @@
 #ifdef CONFIG_ACPI_PROCFS
 	struct proc_dir_entry *entry = NULL;
 #endif
-	unsigned int i;
 
 	if (boot_option_idle_override)
 		return 0;
@@ -1214,13 +1213,6 @@
 		acpi_processor_setup_cpuidle(pr);
 		if (cpuidle_register_device(&pr->power.dev))
 			return -EIO;
-
-		printk(KERN_INFO PREFIX "CPU%d (power states:", pr->id);
-		for (i = 1; i <= pr->power.count; i++)
-			if (pr->power.states[i].valid)
-				printk(" C%d[C%d]", i,
-				       pr->power.states[i].type);
-		printk(")\n");
 	}
 #ifdef CONFIG_ACPI_PROCFS
 	/* 'power' [R] */
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index 408ebde..14a7481 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -22,6 +22,8 @@
 #define ACPI_BUS_HID			"LNXSYBUS"
 #define ACPI_BUS_DEVICE_NAME		"System Bus"
 
+#define ACPI_IS_ROOT_DEVICE(device)    (!(device)->parent)
+
 static LIST_HEAD(acpi_device_list);
 static LIST_HEAD(acpi_bus_id_list);
 DEFINE_MUTEX(acpi_device_lock);
@@ -43,40 +45,19 @@
 {
 	int len;
 	int count;
-
-	if (!acpi_dev->flags.hardware_id && !acpi_dev->flags.compatible_ids)
-		return -ENODEV;
+	struct acpi_hardware_id *id;
 
 	len = snprintf(modalias, size, "acpi:");
 	size -= len;
 
-	if (acpi_dev->flags.hardware_id) {
-		count = snprintf(&modalias[len], size, "%s:",
-				 acpi_dev->pnp.hardware_id);
+	list_for_each_entry(id, &acpi_dev->pnp.ids, list) {
+		count = snprintf(&modalias[len], size, "%s:", id->id);
 		if (count < 0 || count >= size)
 			return -EINVAL;
 		len += count;
 		size -= count;
 	}
 
-	if (acpi_dev->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list;
-		int i;
-
-		cid_list = acpi_dev->pnp.cid_list;
-		for (i = 0; i < cid_list->count; i++) {
-			count = snprintf(&modalias[len], size, "%s:",
-					 cid_list->ids[i].string);
-			if (count < 0 || count >= size) {
-				printk(KERN_ERR PREFIX "%s cid[%i] exceeds event buffer size",
-				       acpi_dev->pnp.device_name, i);
-				break;
-			}
-			len += count;
-			size -= count;
-		}
-	}
-
 	modalias[len] = '\0';
 	return len;
 }
@@ -183,7 +164,7 @@
 acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
-	return sprintf(buf, "%s\n", acpi_dev->pnp.hardware_id);
+	return sprintf(buf, "%s\n", acpi_device_hid(acpi_dev));
 }
 static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
 
@@ -219,17 +200,13 @@
 			goto end;
 	}
 
-	if (dev->flags.hardware_id) {
-		result = device_create_file(&dev->dev, &dev_attr_hid);
-		if (result)
-			goto end;
-	}
+	result = device_create_file(&dev->dev, &dev_attr_hid);
+	if (result)
+		goto end;
 
-	if (dev->flags.hardware_id || dev->flags.compatible_ids) {
-		result = device_create_file(&dev->dev, &dev_attr_modalias);
-		if (result)
-			goto end;
-	}
+	result = device_create_file(&dev->dev, &dev_attr_modalias);
+	if (result)
+		goto end;
 
         /*
          * If device has _EJ0, 'eject' file is created that is used to trigger
@@ -255,11 +232,8 @@
 	if (ACPI_SUCCESS(status))
 		device_remove_file(&dev->dev, &dev_attr_eject);
 
-	if (dev->flags.hardware_id || dev->flags.compatible_ids)
-		device_remove_file(&dev->dev, &dev_attr_modalias);
-
-	if (dev->flags.hardware_id)
-		device_remove_file(&dev->dev, &dev_attr_hid);
+	device_remove_file(&dev->dev, &dev_attr_modalias);
+	device_remove_file(&dev->dev, &dev_attr_hid);
 	if (dev->handle)
 		device_remove_file(&dev->dev, &dev_attr_path);
 }
@@ -271,6 +245,7 @@
 			  const struct acpi_device_id *ids)
 {
 	const struct acpi_device_id *id;
+	struct acpi_hardware_id *hwid;
 
 	/*
 	 * If the device is not present, it is unnecessary to load device
@@ -279,40 +254,30 @@
 	if (!device->status.present)
 		return -ENODEV;
 
-	if (device->flags.hardware_id) {
-		for (id = ids; id->id[0]; id++) {
-			if (!strcmp((char*)id->id, device->pnp.hardware_id))
+	for (id = ids; id->id[0]; id++)
+		list_for_each_entry(hwid, &device->pnp.ids, list)
+			if (!strcmp((char *) id->id, hwid->id))
 				return 0;
-		}
-	}
-
-	if (device->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list = device->pnp.cid_list;
-		int i;
-
-		for (id = ids; id->id[0]; id++) {
-			/* compare multiple _CID entries against driver ids */
-			for (i = 0; i < cid_list->count; i++) {
-				if (!strcmp((char*)id->id,
-					    cid_list->ids[i].string))
-					return 0;
-			}
-		}
-	}
 
 	return -ENOENT;
 }
 EXPORT_SYMBOL(acpi_match_device_ids);
 
+static void acpi_free_ids(struct acpi_device *device)
+{
+	struct acpi_hardware_id *id, *tmp;
+
+	list_for_each_entry_safe(id, tmp, &device->pnp.ids, list) {
+		kfree(id->id);
+		kfree(id);
+	}
+}
+
 static void acpi_device_release(struct device *dev)
 {
 	struct acpi_device *acpi_dev = to_acpi_device(dev);
 
-	kfree(acpi_dev->pnp.cid_list);
-	if (acpi_dev->flags.hardware_id)
-		kfree(acpi_dev->pnp.hardware_id);
-	if (acpi_dev->flags.unique_id)
-		kfree(acpi_dev->pnp.unique_id);
+	acpi_free_ids(acpi_dev);
 	kfree(acpi_dev);
 }
 
@@ -378,15 +343,13 @@
 static int acpi_device_install_notify_handler(struct acpi_device *device)
 {
 	acpi_status status;
-	char *hid;
 
-	hid = acpi_device_hid(device);
-	if (!strcmp(hid, ACPI_BUTTON_HID_POWERF))
+	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
 						     acpi_device_notify_fixed,
 						     device);
-	else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEPF))
+	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		status =
 		    acpi_install_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
 						     acpi_device_notify_fixed,
@@ -404,10 +367,10 @@
 
 static void acpi_device_remove_notify_handler(struct acpi_device *device)
 {
-	if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF))
+	if (device->device_type == ACPI_BUS_TYPE_POWER_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_POWER_BUTTON,
 						acpi_device_notify_fixed);
-	else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF))
+	else if (device->device_type == ACPI_BUS_TYPE_SLEEP_BUTTON)
 		acpi_remove_fixed_event_handler(ACPI_EVENT_SLEEP_BUTTON,
 						acpi_device_notify_fixed);
 	else
@@ -474,12 +437,12 @@
 	.uevent		= acpi_device_uevent,
 };
 
-static int acpi_device_register(struct acpi_device *device,
-				 struct acpi_device *parent)
+static int acpi_device_register(struct acpi_device *device)
 {
 	int result;
 	struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
 	int found = 0;
+
 	/*
 	 * Linkage
 	 * -------
@@ -501,8 +464,9 @@
 	 * If failed, create one and link it into acpi_bus_id_list
 	 */
 	list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
-		if(!strcmp(acpi_device_bus_id->bus_id, device->flags.hardware_id? device->pnp.hardware_id : "device")) {
-			acpi_device_bus_id->instance_no ++;
+		if (!strcmp(acpi_device_bus_id->bus_id,
+			    acpi_device_hid(device))) {
+			acpi_device_bus_id->instance_no++;
 			found = 1;
 			kfree(new_bus_id);
 			break;
@@ -510,7 +474,7 @@
 	}
 	if (!found) {
 		acpi_device_bus_id = new_bus_id;
-		strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
+		strcpy(acpi_device_bus_id->bus_id, acpi_device_hid(device));
 		acpi_device_bus_id->instance_no = 0;
 		list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
 	}
@@ -524,7 +488,7 @@
 	mutex_unlock(&acpi_device_lock);
 
 	if (device->parent)
-		device->dev.parent = &parent->dev;
+		device->dev.parent = &device->parent->dev;
 	device->dev.bus = &acpi_bus_type;
 	device->dev.release = &acpi_device_release;
 	result = device_register(&device->dev);
@@ -664,6 +628,33 @@
 /* --------------------------------------------------------------------------
                                  Device Enumeration
    -------------------------------------------------------------------------- */
+static struct acpi_device *acpi_bus_get_parent(acpi_handle handle)
+{
+	acpi_status status;
+	int ret;
+	struct acpi_device *device;
+
+	/*
+	 * Fixed hardware devices do not appear in the namespace and do not
+	 * have handles, but we fabricate acpi_devices for them, so we have
+	 * to deal with them specially.
+	 */
+	if (handle == NULL)
+		return acpi_root;
+
+	do {
+		status = acpi_get_parent(handle, &handle);
+		if (status == AE_NULL_ENTRY)
+			return NULL;
+		if (ACPI_FAILURE(status))
+			return acpi_root;
+
+		ret = acpi_bus_get_device(handle, &device);
+		if (ret == 0)
+			return device;
+	} while (1);
+}
+
 acpi_status
 acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
 {
@@ -876,11 +867,6 @@
 	if (ACPI_SUCCESS(status))
 		device->flags.dynamic_status = 1;
 
-	/* Presence of _CID indicates 'compatible_ids' */
-	status = acpi_get_handle(device->handle, "_CID", &temp);
-	if (ACPI_SUCCESS(status))
-		device->flags.compatible_ids = 1;
-
 	/* Presence of _RMV indicates 'removable' */
 	status = acpi_get_handle(device->handle, "_RMV", &temp);
 	if (ACPI_SUCCESS(status))
@@ -918,8 +904,7 @@
 	return 0;
 }
 
-static void acpi_device_get_busid(struct acpi_device *device,
-				  acpi_handle handle, int type)
+static void acpi_device_get_busid(struct acpi_device *device)
 {
 	char bus_id[5] = { '?', 0 };
 	struct acpi_buffer buffer = { sizeof(bus_id), bus_id };
@@ -931,10 +916,12 @@
 	 * The device's Bus ID is simply the object name.
 	 * TBD: Shouldn't this value be unique (within the ACPI namespace)?
 	 */
-	switch (type) {
-	case ACPI_BUS_TYPE_SYSTEM:
+	if (ACPI_IS_ROOT_DEVICE(device)) {
 		strcpy(device->pnp.bus_id, "ACPI");
-		break;
+		return;
+	}
+
+	switch (device->device_type) {
 	case ACPI_BUS_TYPE_POWER_BUTTON:
 		strcpy(device->pnp.bus_id, "PWRF");
 		break;
@@ -942,7 +929,7 @@
 		strcpy(device->pnp.bus_id, "SLPF");
 		break;
 	default:
-		acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
+		acpi_get_name(device->handle, ACPI_SINGLE_NAME, &buffer);
 		/* Clean up trailing underscores (if any) */
 		for (i = 3; i > 1; i--) {
 			if (bus_id[i] == '_')
@@ -1000,204 +987,134 @@
 	return acpi_get_handle(device->handle, "_DCK", &tmp);
 }
 
-static struct acpica_device_id_list*
-acpi_add_cid(
-	struct acpi_device_info         *info,
-	struct acpica_device_id         *new_cid)
+char *acpi_device_hid(struct acpi_device *device)
 {
-	struct acpica_device_id_list    *cid;
-	char                            *next_id_string;
-	acpi_size                       cid_length;
-	acpi_size                       new_cid_length;
-	u32                             i;
+	struct acpi_hardware_id *hid;
 
+	hid = list_first_entry(&device->pnp.ids, struct acpi_hardware_id, list);
+	return hid->id;
+}
+EXPORT_SYMBOL(acpi_device_hid);
 
-	/* Allocate new CID list with room for the new CID */
+static void acpi_add_id(struct acpi_device *device, const char *dev_id)
+{
+	struct acpi_hardware_id *id;
 
-	if (!new_cid)
-		new_cid_length = info->compatible_id_list.list_size;
-	else if (info->compatible_id_list.list_size)
-		new_cid_length = info->compatible_id_list.list_size +
-			new_cid->length + sizeof(struct acpica_device_id);
-	else
-		new_cid_length = sizeof(struct acpica_device_id_list) + new_cid->length;
+	id = kmalloc(sizeof(*id), GFP_KERNEL);
+	if (!id)
+		return;
 
-	cid = ACPI_ALLOCATE_ZEROED(new_cid_length);
-	if (!cid) {
-		return NULL;
+	id->id = kmalloc(strlen(dev_id) + 1, GFP_KERNEL);
+	if (!id->id) {
+		kfree(id);
+		return;
 	}
 
-	cid->list_size = new_cid_length;
-	cid->count = info->compatible_id_list.count;
-	if (new_cid)
-		cid->count++;
-	next_id_string = (char *) cid->ids + (cid->count * sizeof(struct acpica_device_id));
-
-	/* Copy all existing CIDs */
-
-	for (i = 0; i < info->compatible_id_list.count; i++) {
-		cid_length = info->compatible_id_list.ids[i].length;
-		cid->ids[i].string = next_id_string;
-		cid->ids[i].length = cid_length;
-
-		ACPI_MEMCPY(next_id_string, info->compatible_id_list.ids[i].string,
-			cid_length);
-
-		next_id_string += cid_length;
-	}
-
-	/* Append the new CID */
-
-	if (new_cid) {
-		cid->ids[i].string = next_id_string;
-		cid->ids[i].length = new_cid->length;
-
-		ACPI_MEMCPY(next_id_string, new_cid->string, new_cid->length);
-	}
-
-	return cid;
+	strcpy(id->id, dev_id);
+	list_add_tail(&id->list, &device->pnp.ids);
 }
 
-static void acpi_device_set_id(struct acpi_device *device,
-			       struct acpi_device *parent, acpi_handle handle,
-			       int type)
+static void acpi_device_set_id(struct acpi_device *device)
 {
-	struct acpi_device_info *info = NULL;
-	char *hid = NULL;
-	char *uid = NULL;
-	struct acpica_device_id_list *cid_list = NULL;
-	char *cid_add = NULL;
 	acpi_status status;
+	struct acpi_device_info *info;
+	struct acpica_device_id_list *cid_list;
+	int i;
 
-	switch (type) {
+	switch (device->device_type) {
 	case ACPI_BUS_TYPE_DEVICE:
-		status = acpi_get_object_info(handle, &info);
+		if (ACPI_IS_ROOT_DEVICE(device)) {
+			acpi_add_id(device, ACPI_SYSTEM_HID);
+			break;
+		} else if (ACPI_IS_ROOT_DEVICE(device->parent)) {
+			/* \_SB_, the only root-level namespace device */
+			acpi_add_id(device, ACPI_BUS_HID);
+			strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
+			strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
+			break;
+		}
+
+		status = acpi_get_object_info(device->handle, &info);
 		if (ACPI_FAILURE(status)) {
 			printk(KERN_ERR PREFIX "%s: Error reading device info\n", __func__);
 			return;
 		}
 
 		if (info->valid & ACPI_VALID_HID)
-			hid = info->hardware_id.string;
-		if (info->valid & ACPI_VALID_UID)
-			uid = info->unique_id.string;
-		if (info->valid & ACPI_VALID_CID)
+			acpi_add_id(device, info->hardware_id.string);
+		if (info->valid & ACPI_VALID_CID) {
 			cid_list = &info->compatible_id_list;
+			for (i = 0; i < cid_list->count; i++)
+				acpi_add_id(device, cid_list->ids[i].string);
+		}
 		if (info->valid & ACPI_VALID_ADR) {
 			device->pnp.bus_address = info->address;
 			device->flags.bus_address = 1;
 		}
 
-		/* If we have a video/bay/dock device, add our selfdefined
-		   HID to the CID list. Like that the video/bay/dock drivers
-		   will get autoloaded and the device might still match
-		   against another driver.
-		*/
+		kfree(info);
+
+		/*
+		 * Some devices don't reliably have _HIDs & _CIDs, so add
+		 * synthetic HIDs to make sure drivers can find them.
+		 */
 		if (acpi_is_video_device(device))
-			cid_add = ACPI_VIDEO_HID;
+			acpi_add_id(device, ACPI_VIDEO_HID);
 		else if (ACPI_SUCCESS(acpi_bay_match(device)))
-			cid_add = ACPI_BAY_HID;
+			acpi_add_id(device, ACPI_BAY_HID);
 		else if (ACPI_SUCCESS(acpi_dock_match(device)))
-			cid_add = ACPI_DOCK_HID;
+			acpi_add_id(device, ACPI_DOCK_HID);
 
 		break;
 	case ACPI_BUS_TYPE_POWER:
-		hid = ACPI_POWER_HID;
+		acpi_add_id(device, ACPI_POWER_HID);
 		break;
 	case ACPI_BUS_TYPE_PROCESSOR:
-		hid = ACPI_PROCESSOR_OBJECT_HID;
-		break;
-	case ACPI_BUS_TYPE_SYSTEM:
-		hid = ACPI_SYSTEM_HID;
+		acpi_add_id(device, ACPI_PROCESSOR_OBJECT_HID);
 		break;
 	case ACPI_BUS_TYPE_THERMAL:
-		hid = ACPI_THERMAL_HID;
+		acpi_add_id(device, ACPI_THERMAL_HID);
 		break;
 	case ACPI_BUS_TYPE_POWER_BUTTON:
-		hid = ACPI_BUTTON_HID_POWERF;
+		acpi_add_id(device, ACPI_BUTTON_HID_POWERF);
 		break;
 	case ACPI_BUS_TYPE_SLEEP_BUTTON:
-		hid = ACPI_BUTTON_HID_SLEEPF;
+		acpi_add_id(device, ACPI_BUTTON_HID_SLEEPF);
 		break;
 	}
 
 	/*
-	 * \_SB
-	 * ----
-	 * Fix for the system root bus device -- the only root-level device.
+	 * We build acpi_devices for some objects that don't have _HID or _CID,
+	 * e.g., PCI bridges and slots.  Drivers can't bind to these objects,
+	 * but we do use them indirectly by traversing the acpi_device tree.
+	 * This generic ID isn't useful for driver binding, but it provides
+	 * the useful property that "every acpi_device has an ID."
 	 */
-	if (((acpi_handle)parent == ACPI_ROOT_OBJECT) && (type == ACPI_BUS_TYPE_DEVICE)) {
-		hid = ACPI_BUS_HID;
-		strcpy(device->pnp.device_name, ACPI_BUS_DEVICE_NAME);
-		strcpy(device->pnp.device_class, ACPI_BUS_CLASS);
-	}
-
-	if (hid) {
-		device->pnp.hardware_id = ACPI_ALLOCATE_ZEROED(strlen (hid) + 1);
-		if (device->pnp.hardware_id) {
-			strcpy(device->pnp.hardware_id, hid);
-			device->flags.hardware_id = 1;
-		}
-	}
-	if (!device->flags.hardware_id)
-		device->pnp.hardware_id = "";
-
-	if (uid) {
-		device->pnp.unique_id = ACPI_ALLOCATE_ZEROED(strlen (uid) + 1);
-		if (device->pnp.unique_id) {
-			strcpy(device->pnp.unique_id, uid);
-			device->flags.unique_id = 1;
-		}
-	}
-	if (!device->flags.unique_id)
-		device->pnp.unique_id = "";
-
-	if (cid_list || cid_add) {
-		struct acpica_device_id_list *list;
-
-		if (cid_add) {
-			struct acpica_device_id cid;
-			cid.length = strlen (cid_add) + 1;
-			cid.string = cid_add;
-
-			list = acpi_add_cid(info, &cid);
-		} else {
-			list = acpi_add_cid(info, NULL);
-		}
-
-		if (list) {
-			device->pnp.cid_list = list;
-			if (cid_add)
-				device->flags.compatible_ids = 1;
-		}
-	}
-
-	kfree(info);
+	if (list_empty(&device->pnp.ids))
+		acpi_add_id(device, "device");
 }
 
-static int acpi_device_set_context(struct acpi_device *device, int type)
+static int acpi_device_set_context(struct acpi_device *device)
 {
-	acpi_status status = AE_OK;
-	int result = 0;
+	acpi_status status;
+
 	/*
 	 * Context
 	 * -------
 	 * Attach this 'struct acpi_device' to the ACPI object.  This makes
-	 * resolutions from handle->device very efficient.  Note that we need
-	 * to be careful with fixed-feature devices as they all attach to the
-	 * root object.
+	 * resolutions from handle->device very efficient.  Fixed hardware
+	 * devices have no handles, so we skip them.
 	 */
-	if (type != ACPI_BUS_TYPE_POWER_BUTTON &&
-	    type != ACPI_BUS_TYPE_SLEEP_BUTTON) {
-		status = acpi_attach_data(device->handle,
-					  acpi_bus_data_handler, device);
+	if (!device->handle)
+		return 0;
 
-		if (ACPI_FAILURE(status)) {
-			printk(KERN_ERR PREFIX "Error attaching device data\n");
-			result = -ENODEV;
-		}
-	}
-	return result;
+	status = acpi_attach_data(device->handle,
+				  acpi_bus_data_handler, device);
+	if (ACPI_SUCCESS(status))
+		return 0;
+
+	printk(KERN_ERR PREFIX "Error attaching device data\n");
+	return -ENODEV;
 }
 
 static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
@@ -1223,17 +1140,14 @@
 	return 0;
 }
 
-static int
-acpi_add_single_object(struct acpi_device **child,
-		       struct acpi_device *parent, acpi_handle handle, int type,
-			struct acpi_bus_ops *ops)
+static int acpi_add_single_object(struct acpi_device **child,
+				  acpi_handle handle, int type,
+				  unsigned long long sta,
+				  struct acpi_bus_ops *ops)
 {
-	int result = 0;
-	struct acpi_device *device = NULL;
-
-
-	if (!child)
-		return -EINVAL;
+	int result;
+	struct acpi_device *device;
+	struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
 
 	device = kzalloc(sizeof(struct acpi_device), GFP_KERNEL);
 	if (!device) {
@@ -1241,75 +1155,31 @@
 		return -ENOMEM;
 	}
 
+	INIT_LIST_HEAD(&device->pnp.ids);
+	device->device_type = type;
 	device->handle = handle;
-	device->parent = parent;
+	device->parent = acpi_bus_get_parent(handle);
 	device->bus_ops = *ops; /* workround for not call .start */
+	STRUCT_TO_INT(device->status) = sta;
 
-
-	acpi_device_get_busid(device, handle, type);
+	acpi_device_get_busid(device);
 
 	/*
 	 * Flags
 	 * -----
-	 * Get prior to calling acpi_bus_get_status() so we know whether
-	 * or not _STA is present.  Note that we only look for object
-	 * handles -- cannot evaluate objects until we know the device is
-	 * present and properly initialized.
+	 * Note that we only look for object handles -- cannot evaluate objects
+	 * until we know the device is present and properly initialized.
 	 */
 	result = acpi_bus_get_flags(device);
 	if (result)
 		goto end;
 
 	/*
-	 * Status
-	 * ------
-	 * See if the device is present.  We always assume that non-Device
-	 * and non-Processor objects (e.g. thermal zones, power resources,
-	 * etc.) are present, functioning, etc. (at least when parent object
-	 * is present).  Note that _STA has a different meaning for some
-	 * objects (e.g. power resources) so we need to be careful how we use
-	 * it.
-	 */
-	switch (type) {
-	case ACPI_BUS_TYPE_PROCESSOR:
-	case ACPI_BUS_TYPE_DEVICE:
-		result = acpi_bus_get_status(device);
-		if (ACPI_FAILURE(result)) {
-			result = -ENODEV;
-			goto end;
-		}
-		/*
-		 * When the device is neither present nor functional, the
-		 * device should not be added to Linux ACPI device tree.
-		 * When the status of the device is not present but functinal,
-		 * it should be added to Linux ACPI tree. For example : bay
-		 * device , dock device.
-		 * In such conditions it is unncessary to check whether it is
-		 * bay device or dock device.
-		 */
-		if (!device->status.present && !device->status.functional) {
-			result = -ENODEV;
-			goto end;
-		}
-		break;
-	default:
-		STRUCT_TO_INT(device->status) =
-		    ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED |
-		    ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING;
-		break;
-	}
-
-	/*
 	 * Initialize Device
 	 * -----------------
 	 * TBD: Synch with Core's enumeration/initialization process.
 	 */
-
-	/*
-	 * Hardware ID, Unique ID, & Bus Address
-	 * -------------------------------------
-	 */
-	acpi_device_set_id(device, parent, handle, type);
+	acpi_device_set_id(device);
 
 	/*
 	 * Power Management
@@ -1341,10 +1211,10 @@
 			goto end;
 	}
 
-	if ((result = acpi_device_set_context(device, type)))
+	if ((result = acpi_device_set_context(device)))
 		goto end;
 
-	result = acpi_device_register(device, parent);
+	result = acpi_device_register(device);
 
 	/*
 	 * Bind _ADR-Based Devices when hot add
@@ -1355,165 +1225,143 @@
 	}
 
 end:
-	if (!result)
+	if (!result) {
+		acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+			"Adding %s [%s] parent %s\n", dev_name(&device->dev),
+			 (char *) buffer.pointer,
+			 device->parent ? dev_name(&device->parent->dev) :
+					  "(null)"));
+		kfree(buffer.pointer);
 		*child = device;
-	else
+	} else
 		acpi_device_release(&device->dev);
 
 	return result;
 }
 
-static int acpi_bus_scan(struct acpi_device *start, struct acpi_bus_ops *ops)
+#define ACPI_STA_DEFAULT (ACPI_STA_DEVICE_PRESENT | ACPI_STA_DEVICE_ENABLED | \
+			  ACPI_STA_DEVICE_UI      | ACPI_STA_DEVICE_FUNCTIONING)
+
+static int acpi_bus_type_and_status(acpi_handle handle, int *type,
+				    unsigned long long *sta)
 {
-	acpi_status status = AE_OK;
-	struct acpi_device *parent = NULL;
-	struct acpi_device *child = NULL;
-	acpi_handle phandle = NULL;
-	acpi_handle chandle = NULL;
-	acpi_object_type type = 0;
-	u32 level = 1;
+	acpi_status status;
+	acpi_object_type acpi_type;
 
+	status = acpi_get_type(handle, &acpi_type);
+	if (ACPI_FAILURE(status))
+		return -ENODEV;
 
-	if (!start)
-		return -EINVAL;
-
-	parent = start;
-	phandle = start->handle;
-
-	/*
-	 * Parse through the ACPI namespace, identify all 'devices', and
-	 * create a new 'struct acpi_device' for each.
-	 */
-	while ((level > 0) && parent) {
-
-		status = acpi_get_next_object(ACPI_TYPE_ANY, phandle,
-					      chandle, &chandle);
-
-		/*
-		 * If this scope is exhausted then move our way back up.
-		 */
-		if (ACPI_FAILURE(status)) {
-			level--;
-			chandle = phandle;
-			acpi_get_parent(phandle, &phandle);
-			if (parent->parent)
-				parent = parent->parent;
-			continue;
-		}
-
-		status = acpi_get_type(chandle, &type);
+	switch (acpi_type) {
+	case ACPI_TYPE_ANY:		/* for ACPI_ROOT_OBJECT */
+	case ACPI_TYPE_DEVICE:
+		*type = ACPI_BUS_TYPE_DEVICE;
+		status = acpi_bus_get_status_handle(handle, sta);
 		if (ACPI_FAILURE(status))
-			continue;
-
-		/*
-		 * If this is a scope object then parse it (depth-first).
-		 */
-		if (type == ACPI_TYPE_LOCAL_SCOPE) {
-			level++;
-			phandle = chandle;
-			chandle = NULL;
-			continue;
-		}
-
-		/*
-		 * We're only interested in objects that we consider 'devices'.
-		 */
-		switch (type) {
-		case ACPI_TYPE_DEVICE:
-			type = ACPI_BUS_TYPE_DEVICE;
-			break;
-		case ACPI_TYPE_PROCESSOR:
-			type = ACPI_BUS_TYPE_PROCESSOR;
-			break;
-		case ACPI_TYPE_THERMAL:
-			type = ACPI_BUS_TYPE_THERMAL;
-			break;
-		case ACPI_TYPE_POWER:
-			type = ACPI_BUS_TYPE_POWER;
-			break;
-		default:
-			continue;
-		}
-
-		if (ops->acpi_op_add)
-			status = acpi_add_single_object(&child, parent,
-				chandle, type, ops);
-		else
-			status = acpi_bus_get_device(chandle, &child);
-
+			return -ENODEV;
+		break;
+	case ACPI_TYPE_PROCESSOR:
+		*type = ACPI_BUS_TYPE_PROCESSOR;
+		status = acpi_bus_get_status_handle(handle, sta);
 		if (ACPI_FAILURE(status))
-			continue;
-
-		if (ops->acpi_op_start && !(ops->acpi_op_add)) {
-			status = acpi_start_single_object(child);
-			if (ACPI_FAILURE(status))
-				continue;
-		}
-
-		/*
-		 * If the device is present, enabled, and functioning then
-		 * parse its scope (depth-first).  Note that we need to
-		 * represent absent devices to facilitate PnP notifications
-		 * -- but only the subtree head (not all of its children,
-		 * which will be enumerated when the parent is inserted).
-		 *
-		 * TBD: Need notifications and other detection mechanisms
-		 *      in place before we can fully implement this.
-		 */
-		 /*
-		 * When the device is not present but functional, it is also
-		 * necessary to scan the children of this device.
-		 */
-		if (child->status.present || (!child->status.present &&
-					child->status.functional)) {
-			status = acpi_get_next_object(ACPI_TYPE_ANY, chandle,
-						      NULL, NULL);
-			if (ACPI_SUCCESS(status)) {
-				level++;
-				phandle = chandle;
-				chandle = NULL;
-				parent = child;
-			}
-		}
+			return -ENODEV;
+		break;
+	case ACPI_TYPE_THERMAL:
+		*type = ACPI_BUS_TYPE_THERMAL;
+		*sta = ACPI_STA_DEFAULT;
+		break;
+	case ACPI_TYPE_POWER:
+		*type = ACPI_BUS_TYPE_POWER;
+		*sta = ACPI_STA_DEFAULT;
+		break;
+	default:
+		return -ENODEV;
 	}
 
 	return 0;
 }
 
+static acpi_status acpi_bus_check_add(acpi_handle handle, u32 lvl,
+				      void *context, void **return_value)
+{
+	struct acpi_bus_ops *ops = context;
+	int type;
+	unsigned long long sta;
+	struct acpi_device *device;
+	acpi_status status;
+	int result;
+
+	result = acpi_bus_type_and_status(handle, &type, &sta);
+	if (result)
+		return AE_OK;
+
+	if (!(sta & ACPI_STA_DEVICE_PRESENT) &&
+	    !(sta & ACPI_STA_DEVICE_FUNCTIONING))
+		return AE_CTRL_DEPTH;
+
+	/*
+	 * We may already have an acpi_device from a previous enumeration.  If
+	 * so, we needn't add it again, but we may still have to start it.
+	 */
+	device = NULL;
+	acpi_bus_get_device(handle, &device);
+	if (ops->acpi_op_add && !device)
+		acpi_add_single_object(&device, handle, type, sta, ops);
+
+	if (!device)
+		return AE_CTRL_DEPTH;
+
+	if (ops->acpi_op_start && !(ops->acpi_op_add)) {
+		status = acpi_start_single_object(device);
+		if (ACPI_FAILURE(status))
+			return AE_CTRL_DEPTH;
+	}
+
+	if (!*return_value)
+		*return_value = device;
+	return AE_OK;
+}
+
+static int acpi_bus_scan(acpi_handle handle, struct acpi_bus_ops *ops,
+			 struct acpi_device **child)
+{
+	acpi_status status;
+	void *device = NULL;
+
+	status = acpi_bus_check_add(handle, 0, ops, &device);
+	if (ACPI_SUCCESS(status))
+		acpi_walk_namespace(ACPI_TYPE_ANY, handle, ACPI_UINT32_MAX,
+				    acpi_bus_check_add, ops, &device);
+
+	if (child)
+		*child = device;
+	return 0;
+}
+
 int
 acpi_bus_add(struct acpi_device **child,
 	     struct acpi_device *parent, acpi_handle handle, int type)
 {
-	int result;
 	struct acpi_bus_ops ops;
 
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 
-	result = acpi_add_single_object(child, parent, handle, type, &ops);
-	if (!result)
-		result = acpi_bus_scan(*child, &ops);
-
-	return result;
+	acpi_bus_scan(handle, &ops, child);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_bus_add);
 
 int acpi_bus_start(struct acpi_device *device)
 {
-	int result;
 	struct acpi_bus_ops ops;
 
+	memset(&ops, 0, sizeof(ops));
+	ops.acpi_op_start = 1;
 
-	if (!device)
-		return -EINVAL;
-
-	result = acpi_start_single_object(device);
-	if (!result) {
-		memset(&ops, 0, sizeof(ops));
-		ops.acpi_op_start = 1;
-		result = acpi_bus_scan(device, &ops);
-	}
-	return result;
+	acpi_bus_scan(device->handle, &ops, NULL);
+	return 0;
 }
 EXPORT_SYMBOL(acpi_bus_start);
 
@@ -1572,15 +1420,12 @@
 }
 EXPORT_SYMBOL_GPL(acpi_bus_trim);
 
-static int acpi_bus_scan_fixed(struct acpi_device *root)
+static int acpi_bus_scan_fixed(void)
 {
 	int result = 0;
 	struct acpi_device *device = NULL;
 	struct acpi_bus_ops ops;
 
-	if (!root)
-		return -ENODEV;
-
 	memset(&ops, 0, sizeof(ops));
 	ops.acpi_op_add = 1;
 	ops.acpi_op_start = 1;
@@ -1589,16 +1434,16 @@
 	 * Enumerate all fixed-feature devices.
 	 */
 	if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
-		result = acpi_add_single_object(&device, acpi_root,
-						NULL,
+		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_POWER_BUTTON,
+						ACPI_STA_DEFAULT,
 						&ops);
 	}
 
 	if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
-		result = acpi_add_single_object(&device, acpi_root,
-						NULL,
+		result = acpi_add_single_object(&device, NULL,
 						ACPI_BUS_TYPE_SLEEP_BUTTON,
+						ACPI_STA_DEFAULT,
 						&ops);
 	}
 
@@ -1621,24 +1466,15 @@
 	}
 
 	/*
-	 * Create the root device in the bus's device tree
-	 */
-	result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
-					ACPI_BUS_TYPE_SYSTEM, &ops);
-	if (result)
-		goto Done;
-
-	/*
 	 * Enumerate devices in the ACPI namespace.
 	 */
-	result = acpi_bus_scan_fixed(acpi_root);
+	result = acpi_bus_scan(ACPI_ROOT_OBJECT, &ops, &acpi_root);
 
 	if (!result)
-		result = acpi_bus_scan(acpi_root, &ops);
+		result = acpi_bus_scan_fixed();
 
 	if (result)
 		acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
 
-Done:
 	return result;
 }
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 94b1a4c..f6e54bf 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -285,7 +285,7 @@
 						struct file *file);
 static ssize_t acpi_video_device_write_brightness(struct file *file,
 	const char __user *buffer, size_t count, loff_t *data);
-static struct file_operations acpi_video_device_brightness_fops = {
+static const struct file_operations acpi_video_device_brightness_fops = {
 	.owner = THIS_MODULE,
 	.open = acpi_video_device_brightness_open_fs,
 	.read = seq_read,
@@ -1986,6 +1986,10 @@
 
 	result = acpi_video_device_lcd_set_level(device, level_next);
 
+	if (!result)
+		backlight_force_update(device->backlight,
+				       BACKLIGHT_UPDATE_HOTKEY);
+
 out:
 	if (result)
 		printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c
index f766cc4..bc53fed 100644
--- a/drivers/atm/fore200e.c
+++ b/drivers/atm/fore200e.c
@@ -2906,8 +2906,8 @@
 	u32 media_index    = FORE200E_MEDIA_INDEX(fore200e->bus->read(&fore200e->cp_queues->media_type));
 	u32 oc3_index;
 
-	if ((media_index < 0) || (media_index > 4))
-	    media_index = 5;
+	if (media_index > 4)
+		media_index = 5;
 	
 	switch (fore200e->loop_mode) {
 	    case ATM_LM_NONE:    oc3_index = 0;
diff --git a/drivers/atm/he.c b/drivers/atm/he.c
index 7066703..e906658 100644
--- a/drivers/atm/he.c
+++ b/drivers/atm/he.c
@@ -2739,7 +2739,7 @@
 			spin_lock_irqsave(&he_dev->global_lock, flags);
 			switch (reg.type) {
 				case HE_REGTYPE_PCI:
-					if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) {
+					if (reg.addr >= HE_REGMAP_SIZE) {
 						err = -EINVAL;
 						break;
 					}
diff --git a/drivers/block/DAC960.c b/drivers/block/DAC960.c
index 6fa7b0f..eb4fa19 100644
--- a/drivers/block/DAC960.c
+++ b/drivers/block/DAC960.c
@@ -38,6 +38,7 @@
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/reboot.h>
 #include <linux/spinlock.h>
 #include <linux/timer.h>
@@ -6422,16 +6423,10 @@
   return true;
 }
 
-
-/*
-  DAC960_ProcReadStatus implements reading /proc/rd/status.
-*/
-
-static int DAC960_ProcReadStatus(char *Page, char **Start, off_t Offset,
-				 int Count, int *EOF, void *Data)
+static int dac960_proc_show(struct seq_file *m, void *v)
 {
   unsigned char *StatusMessage = "OK\n";
-  int ControllerNumber, BytesAvailable;
+  int ControllerNumber;
   for (ControllerNumber = 0;
        ControllerNumber < DAC960_ControllerCount;
        ControllerNumber++)
@@ -6444,52 +6439,49 @@
 	  break;
 	}
     }
-  BytesAvailable = strlen(StatusMessage) - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &StatusMessage[Offset], Count);
-  return Count;
+  seq_puts(m, StatusMessage);
+  return 0;
 }
 
-
-/*
-  DAC960_ProcReadInitialStatus implements reading /proc/rd/cN/initial_status.
-*/
-
-static int DAC960_ProcReadInitialStatus(char *Page, char **Start, off_t Offset,
-					int Count, int *EOF, void *Data)
+static int dac960_proc_open(struct inode *inode, struct file *file)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
-  int BytesAvailable = Controller->InitialStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->CombinedStatusBuffer[Offset], Count);
-  return Count;
+	return single_open(file, dac960_proc_show, NULL);
 }
 
+static const struct file_operations dac960_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-/*
-  DAC960_ProcReadCurrentStatus implements reading /proc/rd/cN/current_status.
-*/
-
-static int DAC960_ProcReadCurrentStatus(char *Page, char **Start, off_t Offset,
-					int Count, int *EOF, void *Data)
+static int dac960_initial_status_proc_show(struct seq_file *m, void *v)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+	DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
+	seq_printf(m, "%.*s", Controller->InitialStatusLength, Controller->CombinedStatusBuffer);
+	return 0;
+}
+
+static int dac960_initial_status_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_initial_status_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations dac960_initial_status_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_initial_status_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int dac960_current_status_proc_show(struct seq_file *m, void *v)
+{
+  DAC960_Controller_T *Controller = (DAC960_Controller_T *) m->private;
   unsigned char *StatusMessage =
     "No Rebuild or Consistency Check in Progress\n";
   int ProgressMessageLength = strlen(StatusMessage);
-  int BytesAvailable;
   if (jiffies != Controller->LastCurrentStatusTime)
     {
       Controller->CurrentStatusLength = 0;
@@ -6513,49 +6505,41 @@
 	}
       Controller->LastCurrentStatusTime = jiffies;
     }
-  BytesAvailable = Controller->CurrentStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->CurrentStatusBuffer[Offset], Count);
-  return Count;
+	seq_printf(m, "%.*s", Controller->CurrentStatusLength, Controller->CurrentStatusBuffer);
+	return 0;
 }
 
-
-/*
-  DAC960_ProcReadUserCommand implements reading /proc/rd/cN/user_command.
-*/
-
-static int DAC960_ProcReadUserCommand(char *Page, char **Start, off_t Offset,
-				      int Count, int *EOF, void *Data)
+static int dac960_current_status_proc_open(struct inode *inode, struct file *file)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
-  int BytesAvailable = Controller->UserStatusLength - Offset;
-  if (Count >= BytesAvailable)
-    {
-      Count = BytesAvailable;
-      *EOF = true;
-    }
-  if (Count <= 0) return 0;
-  *Start = Page;
-  memcpy(Page, &Controller->UserStatusBuffer[Offset], Count);
-  return Count;
+	return single_open(file, dac960_current_status_proc_show, PDE(inode)->data);
 }
 
+static const struct file_operations dac960_current_status_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_current_status_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 
-/*
-  DAC960_ProcWriteUserCommand implements writing /proc/rd/cN/user_command.
-*/
+static int dac960_user_command_proc_show(struct seq_file *m, void *v)
+{
+	DAC960_Controller_T *Controller = (DAC960_Controller_T *)m->private;
 
-static int DAC960_ProcWriteUserCommand(struct file *file,
+	seq_printf(m, "%.*s", Controller->UserStatusLength, Controller->UserStatusBuffer);
+	return 0;
+}
+
+static int dac960_user_command_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, dac960_user_command_proc_show, PDE(inode)->data);
+}
+
+static ssize_t dac960_user_command_proc_write(struct file *file,
 				       const char __user *Buffer,
-				       unsigned long Count, void *Data)
+				       size_t Count, loff_t *pos)
 {
-  DAC960_Controller_T *Controller = (DAC960_Controller_T *) Data;
+  DAC960_Controller_T *Controller = (DAC960_Controller_T *) PDE(file->f_path.dentry->d_inode)->data;
   unsigned char CommandBuffer[80];
   int Length;
   if (Count > sizeof(CommandBuffer)-1) return -EINVAL;
@@ -6572,6 +6556,14 @@
 	    ? Count : -EBUSY);
 }
 
+static const struct file_operations dac960_user_command_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= dac960_user_command_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+	.write		= dac960_user_command_proc_write,
+};
 
 /*
   DAC960_CreateProcEntries creates the /proc/rd/... entries for the
@@ -6586,23 +6578,17 @@
 
 	if (DAC960_ProcDirectoryEntry == NULL) {
   		DAC960_ProcDirectoryEntry = proc_mkdir("rd", NULL);
-  		StatusProcEntry = create_proc_read_entry("status", 0,
+  		StatusProcEntry = proc_create("status", 0,
 					   DAC960_ProcDirectoryEntry,
-					   DAC960_ProcReadStatus, NULL);
+					   &dac960_proc_fops);
 	}
 
       sprintf(Controller->ControllerName, "c%d", Controller->ControllerNumber);
       ControllerProcEntry = proc_mkdir(Controller->ControllerName,
 				       DAC960_ProcDirectoryEntry);
-      create_proc_read_entry("initial_status", 0, ControllerProcEntry,
-			     DAC960_ProcReadInitialStatus, Controller);
-      create_proc_read_entry("current_status", 0, ControllerProcEntry,
-			     DAC960_ProcReadCurrentStatus, Controller);
-      UserCommandProcEntry =
-	create_proc_read_entry("user_command", S_IWUSR | S_IRUSR,
-			       ControllerProcEntry, DAC960_ProcReadUserCommand,
-			       Controller);
-      UserCommandProcEntry->write_proc = DAC960_ProcWriteUserCommand;
+      proc_create_data("initial_status", 0, ControllerProcEntry, &dac960_initial_status_proc_fops, Controller);
+      proc_create_data("current_status", 0, ControllerProcEntry, &dac960_current_status_proc_fops, Controller);
+      UserCommandProcEntry = proc_create_data("user_command", S_IWUSR | S_IRUSR, ControllerProcEntry, &dac960_user_command_proc_fops, Controller);
       Controller->ControllerProcEntry = ControllerProcEntry;
 }
 
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 24c3e21..fb5be2d 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -36,9 +36,11 @@
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
 #include <linux/init.h>
+#include <linux/jiffies.h>
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
 #include <linux/compat.h>
+#include <linux/mutex.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 
@@ -155,6 +157,10 @@
 
 static ctlr_info_t *hba[MAX_CTLR];
 
+static struct task_struct *cciss_scan_thread;
+static DEFINE_MUTEX(scan_mutex);
+static LIST_HEAD(scan_q);
+
 static void do_cciss_request(struct request_queue *q);
 static irqreturn_t do_cciss_intr(int irq, void *dev_id);
 static int cciss_open(struct block_device *bdev, fmode_t mode);
@@ -164,9 +170,9 @@
 static int cciss_getgeo(struct block_device *bdev, struct hd_geometry *geo);
 
 static int cciss_revalidate(struct gendisk *disk);
-static int rebuild_lun_table(ctlr_info_t *h, int first_time);
+static int rebuild_lun_table(ctlr_info_t *h, int first_time, int via_ioctl);
 static int deregister_disk(ctlr_info_t *h, int drv_index,
-			   int clear_all);
+			   int clear_all, int via_ioctl);
 
 static void cciss_read_capacity(int ctlr, int logvol, int withirq,
 			sector_t *total_size, unsigned int *block_size);
@@ -189,8 +195,13 @@
 static int process_sendcmd_error(ctlr_info_t *h, CommandList_struct *c);
 
 static void fail_all_cmds(unsigned long ctlr);
+static int add_to_scan_list(struct ctlr_info *h);
 static int scan_thread(void *data);
 static int check_for_unit_attention(ctlr_info_t *h, CommandList_struct *c);
+static void cciss_hba_release(struct device *dev);
+static void cciss_device_release(struct device *dev);
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index);
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index);
 
 #ifdef CONFIG_PROC_FS
 static void cciss_procinit(int i);
@@ -245,7 +256,10 @@
 
 #include "cciss_scsi.c"		/* For SCSI tape support */
 
-#define RAID_UNKNOWN 6
+static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
+	"UNKNOWN"
+};
+#define RAID_UNKNOWN (sizeof(raid_label) / sizeof(raid_label[0])-1)
 
 #ifdef CONFIG_PROC_FS
 
@@ -255,9 +269,6 @@
 #define ENG_GIG 1000000000
 #define ENG_GIG_FACTOR (ENG_GIG/512)
 #define ENGAGE_SCSI	"engage scsi"
-static const char *raid_label[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
-	"UNKNOWN"
-};
 
 static struct proc_dir_entry *proc_cciss;
 
@@ -318,7 +329,7 @@
 	ctlr_info_t *h = seq->private;
 	unsigned ctlr = h->ctlr;
 	loff_t *pos = v;
-	drive_info_struct *drv = &h->drv[*pos];
+	drive_info_struct *drv = h->drv[*pos];
 
 	if (*pos > h->highest_lun)
 		return 0;
@@ -331,7 +342,7 @@
 	vol_sz_frac *= 100;
 	sector_div(vol_sz_frac, ENG_GIG_FACTOR);
 
-	if (drv->raid_level > 5)
+	if (drv->raid_level < 0 || drv->raid_level > RAID_UNKNOWN)
 		drv->raid_level = RAID_UNKNOWN;
 	seq_printf(seq, "cciss/c%dd%d:"
 			"\t%4u.%02uGB\tRAID %s\n",
@@ -426,7 +437,7 @@
 	return err;
 }
 
-static struct file_operations cciss_proc_fops = {
+static const struct file_operations cciss_proc_fops = {
 	.owner	 = THIS_MODULE,
 	.open    = cciss_seq_open,
 	.read    = seq_read,
@@ -454,9 +465,19 @@
 #define to_hba(n) container_of(n, struct ctlr_info, dev)
 #define to_drv(n) container_of(n, drive_info_struct, dev)
 
-static struct device_type cciss_host_type = {
-	.name		= "cciss_host",
-};
+static ssize_t host_store_rescan(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct ctlr_info *h = to_hba(dev);
+
+	add_to_scan_list(h);
+	wake_up_process(cciss_scan_thread);
+	wait_for_completion_interruptible(&h->scan_wait);
+
+	return count;
+}
+DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 
 static ssize_t dev_show_unique_id(struct device *dev,
 				 struct device_attribute *attr,
@@ -560,11 +581,101 @@
 }
 DEVICE_ATTR(rev, S_IRUGO, dev_show_rev, NULL);
 
+static ssize_t cciss_show_lunid(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	unsigned long flags;
+	unsigned char lunid[8];
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	if (!drv->heads) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -ENOTTY;
+	}
+	memcpy(lunid, drv->LunID, sizeof(lunid));
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	return snprintf(buf, 20, "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+		lunid[0], lunid[1], lunid[2], lunid[3],
+		lunid[4], lunid[5], lunid[6], lunid[7]);
+}
+DEVICE_ATTR(lunid, S_IRUGO, cciss_show_lunid, NULL);
+
+static ssize_t cciss_show_raid_level(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	int raid;
+	unsigned long flags;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	raid = drv->raid_level;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	if (raid < 0 || raid > RAID_UNKNOWN)
+		raid = RAID_UNKNOWN;
+
+	return snprintf(buf, strlen(raid_label[raid]) + 7, "RAID %s\n",
+			raid_label[raid]);
+}
+DEVICE_ATTR(raid_level, S_IRUGO, cciss_show_raid_level, NULL);
+
+static ssize_t cciss_show_usage_count(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	drive_info_struct *drv = to_drv(dev);
+	struct ctlr_info *h = to_hba(drv->dev.parent);
+	unsigned long flags;
+	int count;
+
+	spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
+	if (h->busy_configuring) {
+		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+		return -EBUSY;
+	}
+	count = drv->usage_count;
+	spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
+	return snprintf(buf, 20, "%d\n", count);
+}
+DEVICE_ATTR(usage_count, S_IRUGO, cciss_show_usage_count, NULL);
+
+static struct attribute *cciss_host_attrs[] = {
+	&dev_attr_rescan.attr,
+	NULL
+};
+
+static struct attribute_group cciss_host_attr_group = {
+	.attrs = cciss_host_attrs,
+};
+
+static const struct attribute_group *cciss_host_attr_groups[] = {
+	&cciss_host_attr_group,
+	NULL
+};
+
+static struct device_type cciss_host_type = {
+	.name		= "cciss_host",
+	.groups		= cciss_host_attr_groups,
+	.release	= cciss_hba_release,
+};
+
 static struct attribute *cciss_dev_attrs[] = {
 	&dev_attr_unique_id.attr,
 	&dev_attr_model.attr,
 	&dev_attr_vendor.attr,
 	&dev_attr_rev.attr,
+	&dev_attr_lunid.attr,
+	&dev_attr_raid_level.attr,
+	&dev_attr_usage_count.attr,
 	NULL
 };
 
@@ -580,12 +691,24 @@
 static struct device_type cciss_dev_type = {
 	.name		= "cciss_device",
 	.groups		= cciss_dev_attr_groups,
+	.release	= cciss_device_release,
 };
 
 static struct bus_type cciss_bus_type = {
 	.name		= "cciss",
 };
 
+/*
+ * cciss_hba_release is called when the reference count
+ * of h->dev goes to zero.
+ */
+static void cciss_hba_release(struct device *dev)
+{
+	/*
+	 * nothing to do, but need this to avoid a warning
+	 * about not having a release handler from lib/kref.c.
+	 */
+}
 
 /*
  * Initialize sysfs entry for each controller.  This sets up and registers
@@ -609,6 +732,16 @@
 static void cciss_destroy_hba_sysfs_entry(struct ctlr_info *h)
 {
 	device_del(&h->dev);
+	put_device(&h->dev); /* final put. */
+}
+
+/* cciss_device_release is called when the reference count
+ * of h->drv[x]dev goes to zero.
+ */
+static void cciss_device_release(struct device *dev)
+{
+	drive_info_struct *drv = to_drv(dev);
+	kfree(drv);
 }
 
 /*
@@ -617,24 +750,39 @@
  * /sys/bus/pci/devices/<dev/ccis#/. We also create a link from
  * /sys/block/cciss!c#d# to this entry.
  */
-static int cciss_create_ld_sysfs_entry(struct ctlr_info *h,
-				       drive_info_struct *drv,
+static long cciss_create_ld_sysfs_entry(struct ctlr_info *h,
 				       int drv_index)
 {
-	device_initialize(&drv->dev);
-	drv->dev.type = &cciss_dev_type;
-	drv->dev.bus = &cciss_bus_type;
-	dev_set_name(&drv->dev, "c%dd%d", h->ctlr, drv_index);
-	drv->dev.parent = &h->dev;
-	return device_add(&drv->dev);
+	struct device *dev;
+
+	if (h->drv[drv_index]->device_initialized)
+		return 0;
+
+	dev = &h->drv[drv_index]->dev;
+	device_initialize(dev);
+	dev->type = &cciss_dev_type;
+	dev->bus = &cciss_bus_type;
+	dev_set_name(dev, "c%dd%d", h->ctlr, drv_index);
+	dev->parent = &h->dev;
+	h->drv[drv_index]->device_initialized = 1;
+	return device_add(dev);
 }
 
 /*
  * Remove sysfs entries for a logical drive.
  */
-static void cciss_destroy_ld_sysfs_entry(drive_info_struct *drv)
+static void cciss_destroy_ld_sysfs_entry(struct ctlr_info *h, int drv_index,
+	int ctlr_exiting)
 {
-	device_del(&drv->dev);
+	struct device *dev = &h->drv[drv_index]->dev;
+
+	/* special case for c*d0, we only destroy it on controller exit */
+	if (drv_index == 0 && !ctlr_exiting)
+		return;
+
+	device_del(dev);
+	put_device(dev); /* the "final" put. */
+	h->drv[drv_index] = NULL;
 }
 
 /*
@@ -751,7 +899,7 @@
 	printk(KERN_DEBUG "cciss_open %s\n", bdev->bd_disk->disk_name);
 #endif				/* CCISS_DEBUG */
 
-	if (host->busy_initializing || drv->busy_configuring)
+	if (drv->busy_configuring)
 		return -EBUSY;
 	/*
 	 * Root is allowed to open raw volume zero even if it's not configured
@@ -767,7 +915,8 @@
 			if (MINOR(bdev->bd_dev) & 0x0f) {
 				return -ENXIO;
 				/* if it is, make sure we have a LUN ID */
-			} else if (drv->LunID == 0) {
+			} else if (memcmp(drv->LunID, CTLR_LUNID,
+				sizeof(drv->LunID))) {
 				return -ENXIO;
 			}
 		}
@@ -1132,12 +1281,13 @@
 	case CCISS_DEREGDISK:
 	case CCISS_REGNEWD:
 	case CCISS_REVALIDVOLS:
-		return rebuild_lun_table(host, 0);
+		return rebuild_lun_table(host, 0, 1);
 
 	case CCISS_GETLUNINFO:{
 			LogvolInfo_struct luninfo;
 
-			luninfo.LunID = drv->LunID;
+			memcpy(&luninfo.LunID, drv->LunID,
+				sizeof(luninfo.LunID));
 			luninfo.num_opens = drv->usage_count;
 			luninfo.num_parts = 0;
 			if (copy_to_user(argp, &luninfo,
@@ -1475,7 +1625,10 @@
 		/* make sure the disk has been added and the drive is real
 		 * because this can be called from the middle of init_one.
 		 */
-		if (!(h->drv[curr_queue].queue) || !(h->drv[curr_queue].heads))
+		if (!h->drv[curr_queue])
+			continue;
+		if (!(h->drv[curr_queue]->queue) ||
+			!(h->drv[curr_queue]->heads))
 			continue;
 		blk_start_queue(h->gendisk[curr_queue]->queue);
 
@@ -1532,13 +1685,11 @@
 	spin_unlock_irqrestore(&h->lock, flags);
 }
 
-static void log_unit_to_scsi3addr(ctlr_info_t *h, unsigned char scsi3addr[],
-	uint32_t log_unit)
+static inline void log_unit_to_scsi3addr(ctlr_info_t *h,
+	unsigned char scsi3addr[], uint32_t log_unit)
 {
-	log_unit = h->drv[log_unit].LunID & 0x03fff;
-	memset(&scsi3addr[4], 0, 4);
-	memcpy(&scsi3addr[0], &log_unit, 4);
-	scsi3addr[3] |= 0x40;
+	memcpy(scsi3addr, h->drv[log_unit]->LunID,
+		sizeof(h->drv[log_unit]->LunID));
 }
 
 /* This function gets the SCSI vendor, model, and revision of a logical drive
@@ -1615,16 +1766,23 @@
 	return;
 }
 
-static void cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
+/*
+ * cciss_add_disk sets up the block device queue for a logical drive
+ */
+static int cciss_add_disk(ctlr_info_t *h, struct gendisk *disk,
 				int drv_index)
 {
 	disk->queue = blk_init_queue(do_cciss_request, &h->lock);
+	if (!disk->queue)
+		goto init_queue_failure;
 	sprintf(disk->disk_name, "cciss/c%dd%d", h->ctlr, drv_index);
 	disk->major = h->major;
 	disk->first_minor = drv_index << NWD_SHIFT;
 	disk->fops = &cciss_fops;
-	disk->private_data = &h->drv[drv_index];
-	disk->driverfs_dev = &h->drv[drv_index].dev;
+	if (cciss_create_ld_sysfs_entry(h, drv_index))
+		goto cleanup_queue;
+	disk->private_data = h->drv[drv_index];
+	disk->driverfs_dev = &h->drv[drv_index]->dev;
 
 	/* Set up queue information */
 	blk_queue_bounce_limit(disk->queue, h->pdev->dma_mask);
@@ -1642,14 +1800,21 @@
 	disk->queue->queuedata = h;
 
 	blk_queue_logical_block_size(disk->queue,
-				     h->drv[drv_index].block_size);
+				     h->drv[drv_index]->block_size);
 
 	/* Make sure all queue data is written out before */
-	/* setting h->drv[drv_index].queue, as setting this */
+	/* setting h->drv[drv_index]->queue, as setting this */
 	/* allows the interrupt handler to start the queue */
 	wmb();
-	h->drv[drv_index].queue = disk->queue;
+	h->drv[drv_index]->queue = disk->queue;
 	add_disk(disk);
+	return 0;
+
+cleanup_queue:
+	blk_cleanup_queue(disk->queue);
+	disk->queue = NULL;
+init_queue_failure:
+	return -1;
 }
 
 /* This function will check the usage_count of the drive to be updated/added.
@@ -1662,7 +1827,8 @@
  * is also the controller node.  Any changes to disk 0 will show up on
  * the next reboot.
  */
-static void cciss_update_drive_info(int ctlr, int drv_index, int first_time)
+static void cciss_update_drive_info(int ctlr, int drv_index, int first_time,
+	int via_ioctl)
 {
 	ctlr_info_t *h = hba[ctlr];
 	struct gendisk *disk;
@@ -1672,21 +1838,13 @@
 	unsigned long flags = 0;
 	int ret = 0;
 	drive_info_struct *drvinfo;
-	int was_only_controller_node;
 
 	/* Get information about the disk and modify the driver structure */
 	inq_buff = kmalloc(sizeof(InquiryData_struct), GFP_KERNEL);
-	drvinfo = kmalloc(sizeof(*drvinfo), GFP_KERNEL);
+	drvinfo = kzalloc(sizeof(*drvinfo), GFP_KERNEL);
 	if (inq_buff == NULL || drvinfo == NULL)
 		goto mem_msg;
 
-	/* See if we're trying to update the "controller node"
-	 * this will happen the when the first logical drive gets
-	 * created by ACU.
-	 */
-	was_only_controller_node = (drv_index == 0 &&
-				h->drv[0].raid_level == -1);
-
 	/* testing to see if 16-byte CDBs are already being used */
 	if (h->cciss_read == CCISS_READ_16) {
 		cciss_read_capacity_16(h->ctlr, drv_index, 1,
@@ -1719,16 +1877,19 @@
 				drvinfo->model, drvinfo->rev);
 	cciss_get_serial_no(ctlr, drv_index, 1, drvinfo->serial_no,
 			sizeof(drvinfo->serial_no));
+	/* Save the lunid in case we deregister the disk, below. */
+	memcpy(drvinfo->LunID, h->drv[drv_index]->LunID,
+		sizeof(drvinfo->LunID));
 
 	/* Is it the same disk we already know, and nothing's changed? */
-	if (h->drv[drv_index].raid_level != -1 &&
+	if (h->drv[drv_index]->raid_level != -1 &&
 		((memcmp(drvinfo->serial_no,
-				h->drv[drv_index].serial_no, 16) == 0) &&
-		drvinfo->block_size == h->drv[drv_index].block_size &&
-		drvinfo->nr_blocks == h->drv[drv_index].nr_blocks &&
-		drvinfo->heads == h->drv[drv_index].heads &&
-		drvinfo->sectors == h->drv[drv_index].sectors &&
-		drvinfo->cylinders == h->drv[drv_index].cylinders))
+				h->drv[drv_index]->serial_no, 16) == 0) &&
+		drvinfo->block_size == h->drv[drv_index]->block_size &&
+		drvinfo->nr_blocks == h->drv[drv_index]->nr_blocks &&
+		drvinfo->heads == h->drv[drv_index]->heads &&
+		drvinfo->sectors == h->drv[drv_index]->sectors &&
+		drvinfo->cylinders == h->drv[drv_index]->cylinders))
 			/* The disk is unchanged, nothing to update */
 			goto freeret;
 
@@ -1738,18 +1899,17 @@
 	 * If the disk already exists then deregister it before proceeding
 	 * (unless it's the first disk (for the controller node).
 	 */
-	if (h->drv[drv_index].raid_level != -1 && drv_index != 0) {
+	if (h->drv[drv_index]->raid_level != -1 && drv_index != 0) {
 		printk(KERN_WARNING "disk %d has changed.\n", drv_index);
 		spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
-		h->drv[drv_index].busy_configuring = 1;
+		h->drv[drv_index]->busy_configuring = 1;
 		spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
 
-		/* deregister_disk sets h->drv[drv_index].queue = NULL
+		/* deregister_disk sets h->drv[drv_index]->queue = NULL
 		 * which keeps the interrupt handler from starting
 		 * the queue.
 		 */
-		ret = deregister_disk(h, drv_index, 0);
-		h->drv[drv_index].busy_configuring = 0;
+		ret = deregister_disk(h, drv_index, 0, via_ioctl);
 	}
 
 	/* If the disk is in use return */
@@ -1757,22 +1917,31 @@
 		goto freeret;
 
 	/* Save the new information from cciss_geometry_inquiry
-	 * and serial number inquiry.
+	 * and serial number inquiry.  If the disk was deregistered
+	 * above, then h->drv[drv_index] will be NULL.
 	 */
-	h->drv[drv_index].block_size = drvinfo->block_size;
-	h->drv[drv_index].nr_blocks = drvinfo->nr_blocks;
-	h->drv[drv_index].heads = drvinfo->heads;
-	h->drv[drv_index].sectors = drvinfo->sectors;
-	h->drv[drv_index].cylinders = drvinfo->cylinders;
-	h->drv[drv_index].raid_level = drvinfo->raid_level;
-	memcpy(h->drv[drv_index].serial_no, drvinfo->serial_no, 16);
-	memcpy(h->drv[drv_index].vendor, drvinfo->vendor, VENDOR_LEN + 1);
-	memcpy(h->drv[drv_index].model, drvinfo->model, MODEL_LEN + 1);
-	memcpy(h->drv[drv_index].rev, drvinfo->rev, REV_LEN + 1);
+	if (h->drv[drv_index] == NULL) {
+		drvinfo->device_initialized = 0;
+		h->drv[drv_index] = drvinfo;
+		drvinfo = NULL; /* so it won't be freed below. */
+	} else {
+		/* special case for cxd0 */
+		h->drv[drv_index]->block_size = drvinfo->block_size;
+		h->drv[drv_index]->nr_blocks = drvinfo->nr_blocks;
+		h->drv[drv_index]->heads = drvinfo->heads;
+		h->drv[drv_index]->sectors = drvinfo->sectors;
+		h->drv[drv_index]->cylinders = drvinfo->cylinders;
+		h->drv[drv_index]->raid_level = drvinfo->raid_level;
+		memcpy(h->drv[drv_index]->serial_no, drvinfo->serial_no, 16);
+		memcpy(h->drv[drv_index]->vendor, drvinfo->vendor,
+			VENDOR_LEN + 1);
+		memcpy(h->drv[drv_index]->model, drvinfo->model, MODEL_LEN + 1);
+		memcpy(h->drv[drv_index]->rev, drvinfo->rev, REV_LEN + 1);
+	}
 
 	++h->num_luns;
 	disk = h->gendisk[drv_index];
-	set_capacity(disk, h->drv[drv_index].nr_blocks);
+	set_capacity(disk, h->drv[drv_index]->nr_blocks);
 
 	/* If it's not disk 0 (drv_index != 0)
 	 * or if it was disk 0, but there was previously
@@ -1780,8 +1949,15 @@
 	 * (raid_leve == -1) then we want to update the
 	 * logical drive's information.
 	 */
-	if (drv_index || first_time)
-		cciss_add_disk(h, disk, drv_index);
+	if (drv_index || first_time) {
+		if (cciss_add_disk(h, disk, drv_index) != 0) {
+			cciss_free_gendisk(h, drv_index);
+			cciss_free_drive_info(h, drv_index);
+			printk(KERN_WARNING "cciss:%d could not update "
+				"disk %d\n", h->ctlr, drv_index);
+			--h->num_luns;
+		}
+	}
 
 freeret:
 	kfree(inq_buff);
@@ -1793,28 +1969,70 @@
 }
 
 /* This function will find the first index of the controllers drive array
- * that has a -1 for the raid_level and will return that index.  This is
- * where new drives will be added.  If the index to be returned is greater
- * than the highest_lun index for the controller then highest_lun is set
- * to this new index.  If there are no available indexes then -1 is returned.
- * "controller_node" is used to know if this is a real logical drive, or just
- * the controller node, which determines if this counts towards highest_lun.
+ * that has a null drv pointer and allocate the drive info struct and
+ * will return that index   This is where new drives will be added.
+ * If the index to be returned is greater than the highest_lun index for
+ * the controller then highest_lun is set * to this new index.
+ * If there are no available indexes or if tha allocation fails, then -1
+ * is returned.  * "controller_node" is used to know if this is a real
+ * logical drive, or just the controller node, which determines if this
+ * counts towards highest_lun.
  */
-static int cciss_find_free_drive_index(int ctlr, int controller_node)
+static int cciss_alloc_drive_info(ctlr_info_t *h, int controller_node)
 {
 	int i;
+	drive_info_struct *drv;
 
+	/* Search for an empty slot for our drive info */
 	for (i = 0; i < CISS_MAX_LUN; i++) {
-		if (hba[ctlr]->drv[i].raid_level == -1) {
-			if (i > hba[ctlr]->highest_lun)
-				if (!controller_node)
-					hba[ctlr]->highest_lun = i;
+
+		/* if not cxd0 case, and it's occupied, skip it. */
+		if (h->drv[i] && i != 0)
+			continue;
+		/*
+		 * If it's cxd0 case, and drv is alloc'ed already, and a
+		 * disk is configured there, skip it.
+		 */
+		if (i == 0 && h->drv[i] && h->drv[i]->raid_level != -1)
+			continue;
+
+		/*
+		 * We've found an empty slot.  Update highest_lun
+		 * provided this isn't just the fake cxd0 controller node.
+		 */
+		if (i > h->highest_lun && !controller_node)
+			h->highest_lun = i;
+
+		/* If adding a real disk at cxd0, and it's already alloc'ed */
+		if (i == 0 && h->drv[i] != NULL)
 			return i;
-		}
+
+		/*
+		 * Found an empty slot, not already alloc'ed.  Allocate it.
+		 * Mark it with raid_level == -1, so we know it's new later on.
+		 */
+		drv = kzalloc(sizeof(*drv), GFP_KERNEL);
+		if (!drv)
+			return -1;
+		drv->raid_level = -1; /* so we know it's new */
+		h->drv[i] = drv;
+		return i;
 	}
 	return -1;
 }
 
+static void cciss_free_drive_info(ctlr_info_t *h, int drv_index)
+{
+	kfree(h->drv[drv_index]);
+	h->drv[drv_index] = NULL;
+}
+
+static void cciss_free_gendisk(ctlr_info_t *h, int drv_index)
+{
+	put_disk(h->gendisk[drv_index]);
+	h->gendisk[drv_index] = NULL;
+}
+
 /* cciss_add_gendisk finds a free hba[]->drv structure
  * and allocates a gendisk if needed, and sets the lunid
  * in the drvinfo structure.   It returns the index into
@@ -1824,13 +2042,15 @@
  * a means to talk to the controller in case no logical
  * drives have yet been configured.
  */
-static int cciss_add_gendisk(ctlr_info_t *h, __u32 lunid, int controller_node)
+static int cciss_add_gendisk(ctlr_info_t *h, unsigned char lunid[],
+	int controller_node)
 {
 	int drv_index;
 
-	drv_index = cciss_find_free_drive_index(h->ctlr, controller_node);
+	drv_index = cciss_alloc_drive_info(h, controller_node);
 	if (drv_index == -1)
 		return -1;
+
 	/*Check if the gendisk needs to be allocated */
 	if (!h->gendisk[drv_index]) {
 		h->gendisk[drv_index] =
@@ -1839,23 +2059,24 @@
 			printk(KERN_ERR "cciss%d: could not "
 				"allocate a new disk %d\n",
 				h->ctlr, drv_index);
-			return -1;
+			goto err_free_drive_info;
 		}
 	}
-	h->drv[drv_index].LunID = lunid;
-	if (cciss_create_ld_sysfs_entry(h, &h->drv[drv_index], drv_index))
+	memcpy(h->drv[drv_index]->LunID, lunid,
+		sizeof(h->drv[drv_index]->LunID));
+	if (cciss_create_ld_sysfs_entry(h, drv_index))
 		goto err_free_disk;
-
 	/* Don't need to mark this busy because nobody */
 	/* else knows about this disk yet to contend */
 	/* for access to it. */
-	h->drv[drv_index].busy_configuring = 0;
+	h->drv[drv_index]->busy_configuring = 0;
 	wmb();
 	return drv_index;
 
 err_free_disk:
-	put_disk(h->gendisk[drv_index]);
-	h->gendisk[drv_index] = NULL;
+	cciss_free_gendisk(h, drv_index);
+err_free_drive_info:
+	cciss_free_drive_info(h, drv_index);
 	return -1;
 }
 
@@ -1872,21 +2093,25 @@
 	if (h->gendisk[0] != NULL) /* already did this? Then bail. */
 		return;
 
-	drv_index = cciss_add_gendisk(h, 0, 1);
-	if (drv_index == -1) {
-		printk(KERN_WARNING "cciss%d: could not "
-			"add disk 0.\n", h->ctlr);
-		return;
-	}
-	h->drv[drv_index].block_size = 512;
-	h->drv[drv_index].nr_blocks = 0;
-	h->drv[drv_index].heads = 0;
-	h->drv[drv_index].sectors = 0;
-	h->drv[drv_index].cylinders = 0;
-	h->drv[drv_index].raid_level = -1;
-	memset(h->drv[drv_index].serial_no, 0, 16);
+	drv_index = cciss_add_gendisk(h, CTLR_LUNID, 1);
+	if (drv_index == -1)
+		goto error;
+	h->drv[drv_index]->block_size = 512;
+	h->drv[drv_index]->nr_blocks = 0;
+	h->drv[drv_index]->heads = 0;
+	h->drv[drv_index]->sectors = 0;
+	h->drv[drv_index]->cylinders = 0;
+	h->drv[drv_index]->raid_level = -1;
+	memset(h->drv[drv_index]->serial_no, 0, 16);
 	disk = h->gendisk[drv_index];
-	cciss_add_disk(h, disk, drv_index);
+	if (cciss_add_disk(h, disk, drv_index) == 0)
+		return;
+	cciss_free_gendisk(h, drv_index);
+	cciss_free_drive_info(h, drv_index);
+error:
+	printk(KERN_WARNING "cciss%d: could not "
+		"add disk 0.\n", h->ctlr);
+	return;
 }
 
 /* This function will add and remove logical drives from the Logical
@@ -1897,7 +2122,8 @@
  * INPUT
  * h		= The controller to perform the operations on
  */
-static int rebuild_lun_table(ctlr_info_t *h, int first_time)
+static int rebuild_lun_table(ctlr_info_t *h, int first_time,
+	int via_ioctl)
 {
 	int ctlr = h->ctlr;
 	int num_luns;
@@ -1907,7 +2133,7 @@
 	int i;
 	int drv_found;
 	int drv_index = 0;
-	__u32 lunid = 0;
+	unsigned char lunid[8] = CTLR_LUNID;
 	unsigned long flags;
 
 	if (!capable(CAP_SYS_RAWIO))
@@ -1960,13 +2186,13 @@
 		drv_found = 0;
 
 		/* skip holes in the array from already deleted drives */
-		if (h->drv[i].raid_level == -1)
+		if (h->drv[i] == NULL)
 			continue;
 
 		for (j = 0; j < num_luns; j++) {
-			memcpy(&lunid, &ld_buff->LUN[j][0], 4);
-			lunid = le32_to_cpu(lunid);
-			if (h->drv[i].LunID == lunid) {
+			memcpy(lunid, &ld_buff->LUN[j][0], sizeof(lunid));
+			if (memcmp(h->drv[i]->LunID, lunid,
+				sizeof(lunid)) == 0) {
 				drv_found = 1;
 				break;
 			}
@@ -1974,11 +2200,11 @@
 		if (!drv_found) {
 			/* Deregister it from the OS, it's gone. */
 			spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
-			h->drv[i].busy_configuring = 1;
+			h->drv[i]->busy_configuring = 1;
 			spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
-			return_code = deregister_disk(h, i, 1);
-			cciss_destroy_ld_sysfs_entry(&h->drv[i]);
-			h->drv[i].busy_configuring = 0;
+			return_code = deregister_disk(h, i, 1, via_ioctl);
+			if (h->drv[i] != NULL)
+				h->drv[i]->busy_configuring = 0;
 		}
 	}
 
@@ -1992,17 +2218,16 @@
 
 		drv_found = 0;
 
-		memcpy(&lunid, &ld_buff->LUN[i][0], 4);
-		lunid = le32_to_cpu(lunid);
-
+		memcpy(lunid, &ld_buff->LUN[i][0], sizeof(lunid));
 		/* Find if the LUN is already in the drive array
 		 * of the driver.  If so then update its info
 		 * if not in use.  If it does not exist then find
 		 * the first free index and add it.
 		 */
 		for (j = 0; j <= h->highest_lun; j++) {
-			if (h->drv[j].raid_level != -1 &&
-				h->drv[j].LunID == lunid) {
+			if (h->drv[j] != NULL &&
+				memcmp(h->drv[j]->LunID, lunid,
+					sizeof(h->drv[j]->LunID)) == 0) {
 				drv_index = j;
 				drv_found = 1;
 				break;
@@ -2015,7 +2240,8 @@
 			if (drv_index == -1)
 				goto freeret;
 		}
-		cciss_update_drive_info(ctlr, drv_index, first_time);
+		cciss_update_drive_info(ctlr, drv_index, first_time,
+			via_ioctl);
 	}		/* end for */
 
 freeret:
@@ -2032,6 +2258,25 @@
 	goto freeret;
 }
 
+static void cciss_clear_drive_info(drive_info_struct *drive_info)
+{
+	/* zero out the disk size info */
+	drive_info->nr_blocks = 0;
+	drive_info->block_size = 0;
+	drive_info->heads = 0;
+	drive_info->sectors = 0;
+	drive_info->cylinders = 0;
+	drive_info->raid_level = -1;
+	memset(drive_info->serial_no, 0, sizeof(drive_info->serial_no));
+	memset(drive_info->model, 0, sizeof(drive_info->model));
+	memset(drive_info->rev, 0, sizeof(drive_info->rev));
+	memset(drive_info->vendor, 0, sizeof(drive_info->vendor));
+	/*
+	 * don't clear the LUNID though, we need to remember which
+	 * one this one is.
+	 */
+}
+
 /* This function will deregister the disk and it's queue from the
  * kernel.  It must be called with the controller lock held and the
  * drv structures busy_configuring flag set.  It's parameters are:
@@ -2046,43 +2291,48 @@
  *             the disk in preparation for re-adding it.  In this case
  *             the highest_lun should be left unchanged and the LunID
  *             should not be cleared.
+ * via_ioctl
+ *    This indicates whether we've reached this path via ioctl.
+ *    This affects the maximum usage count allowed for c0d0 to be messed with.
+ *    If this path is reached via ioctl(), then the max_usage_count will
+ *    be 1, as the process calling ioctl() has got to have the device open.
+ *    If we get here via sysfs, then the max usage count will be zero.
 */
 static int deregister_disk(ctlr_info_t *h, int drv_index,
-			   int clear_all)
+			   int clear_all, int via_ioctl)
 {
 	int i;
 	struct gendisk *disk;
 	drive_info_struct *drv;
+	int recalculate_highest_lun;
 
 	if (!capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
-	drv = &h->drv[drv_index];
+	drv = h->drv[drv_index];
 	disk = h->gendisk[drv_index];
 
 	/* make sure logical volume is NOT is use */
 	if (clear_all || (h->gendisk[0] == disk)) {
-		if (drv->usage_count > 1)
+		if (drv->usage_count > via_ioctl)
 			return -EBUSY;
 	} else if (drv->usage_count > 0)
 		return -EBUSY;
 
+	recalculate_highest_lun = (drv == h->drv[h->highest_lun]);
+
 	/* invalidate the devices and deregister the disk.  If it is disk
 	 * zero do not deregister it but just zero out it's values.  This
 	 * allows us to delete disk zero but keep the controller registered.
 	 */
 	if (h->gendisk[0] != disk) {
 		struct request_queue *q = disk->queue;
-		if (disk->flags & GENHD_FL_UP)
+		if (disk->flags & GENHD_FL_UP) {
+			cciss_destroy_ld_sysfs_entry(h, drv_index, 0);
 			del_gendisk(disk);
-		if (q) {
-			blk_cleanup_queue(q);
-			/* Set drv->queue to NULL so that we do not try
-			 * to call blk_start_queue on this queue in the
-			 * interrupt handler
-			 */
-			drv->queue = NULL;
 		}
+		if (q)
+			blk_cleanup_queue(q);
 		/* If clear_all is set then we are deleting the logical
 		 * drive, not just refreshing its info.  For drives
 		 * other than disk 0 we will call put_disk.  We do not
@@ -2105,34 +2355,20 @@
 		}
 	} else {
 		set_capacity(disk, 0);
+		cciss_clear_drive_info(drv);
 	}
 
 	--h->num_luns;
-	/* zero out the disk size info */
-	drv->nr_blocks = 0;
-	drv->block_size = 0;
-	drv->heads = 0;
-	drv->sectors = 0;
-	drv->cylinders = 0;
-	drv->raid_level = -1;	/* This can be used as a flag variable to
-				 * indicate that this element of the drive
-				 * array is free.
-				 */
 
-	if (clear_all) {
-		/* check to see if it was the last disk */
-		if (drv == h->drv + h->highest_lun) {
-			/* if so, find the new hightest lun */
-			int i, newhighest = -1;
-			for (i = 0; i <= h->highest_lun; i++) {
-				/* if the disk has size > 0, it is available */
-				if (h->drv[i].heads)
-					newhighest = i;
-			}
-			h->highest_lun = newhighest;
+	/* if it was the last disk, find the new hightest lun */
+	if (clear_all && recalculate_highest_lun) {
+		int i, newhighest = -1;
+		for (i = 0; i <= h->highest_lun; i++) {
+			/* if the disk has size > 0, it is available */
+			if (h->drv[i] && h->drv[i]->heads)
+				newhighest = i;
 		}
-
-		drv->LunID = 0;
+		h->highest_lun = newhighest;
 	}
 	return 0;
 }
@@ -2479,8 +2715,6 @@
 	} else {		/* Get geometry failed */
 		printk(KERN_WARNING "cciss: reading geometry failed\n");
 	}
-	printk(KERN_INFO "      heads=%d, sectors=%d, cylinders=%d\n\n",
-	       drv->heads, drv->sectors, drv->cylinders);
 }
 
 static void
@@ -2514,9 +2748,6 @@
 		*total_size = 0;
 		*block_size = BLOCK_SIZE;
 	}
-	if (*total_size != 0)
-		printk(KERN_INFO "      blocks= %llu block_size= %d\n",
-		(unsigned long long)*total_size+1, *block_size);
 	kfree(buf);
 }
 
@@ -2568,7 +2799,8 @@
 	InquiryData_struct *inq_buff = NULL;
 
 	for (logvol = 0; logvol < CISS_MAX_LUN; logvol++) {
-		if (h->drv[logvol].LunID == drv->LunID) {
+		if (memcmp(h->drv[logvol]->LunID, drv->LunID,
+			sizeof(drv->LunID)) == 0) {
 			FOUND = 1;
 			break;
 		}
@@ -3053,8 +3285,7 @@
 	/* The first 2 bits are reserved for controller error reporting. */
 	c->Header.Tag.lower = (c->cmdindex << 3);
 	c->Header.Tag.lower |= 0x04;	/* flag for direct lookup. */
-	c->Header.LUN.LogDev.VolId = drv->LunID;
-	c->Header.LUN.LogDev.Mode = 1;
+	memcpy(&c->Header.LUN, drv->LunID, sizeof(drv->LunID));
 	c->Request.CDBLen = 10;	// 12 byte commands not in FW yet;
 	c->Request.Type.Type = TYPE_CMD;	// It is a command.
 	c->Request.Type.Attribute = ATTR_SIMPLE;
@@ -3232,20 +3463,121 @@
 	return IRQ_HANDLED;
 }
 
+/**
+ * add_to_scan_list() - add controller to rescan queue
+ * @h:		      Pointer to the controller.
+ *
+ * Adds the controller to the rescan queue if not already on the queue.
+ *
+ * returns 1 if added to the queue, 0 if skipped (could be on the
+ * queue already, or the controller could be initializing or shutting
+ * down).
+ **/
+static int add_to_scan_list(struct ctlr_info *h)
+{
+	struct ctlr_info *test_h;
+	int found = 0;
+	int ret = 0;
+
+	if (h->busy_initializing)
+		return 0;
+
+	if (!mutex_trylock(&h->busy_shutting_down))
+		return 0;
+
+	mutex_lock(&scan_mutex);
+	list_for_each_entry(test_h, &scan_q, scan_list) {
+		if (test_h == h) {
+			found = 1;
+			break;
+		}
+	}
+	if (!found && !h->busy_scanning) {
+		INIT_COMPLETION(h->scan_wait);
+		list_add_tail(&h->scan_list, &scan_q);
+		ret = 1;
+	}
+	mutex_unlock(&scan_mutex);
+	mutex_unlock(&h->busy_shutting_down);
+
+	return ret;
+}
+
+/**
+ * remove_from_scan_list() - remove controller from rescan queue
+ * @h:			   Pointer to the controller.
+ *
+ * Removes the controller from the rescan queue if present. Blocks if
+ * the controller is currently conducting a rescan.
+ **/
+static void remove_from_scan_list(struct ctlr_info *h)
+{
+	struct ctlr_info *test_h, *tmp_h;
+	int scanning = 0;
+
+	mutex_lock(&scan_mutex);
+	list_for_each_entry_safe(test_h, tmp_h, &scan_q, scan_list) {
+		if (test_h == h) {
+			list_del(&h->scan_list);
+			complete_all(&h->scan_wait);
+			mutex_unlock(&scan_mutex);
+			return;
+		}
+	}
+	if (&h->busy_scanning)
+		scanning = 0;
+	mutex_unlock(&scan_mutex);
+
+	if (scanning)
+		wait_for_completion(&h->scan_wait);
+}
+
+/**
+ * scan_thread() - kernel thread used to rescan controllers
+ * @data:	 Ignored.
+ *
+ * A kernel thread used scan for drive topology changes on
+ * controllers. The thread processes only one controller at a time
+ * using a queue.  Controllers are added to the queue using
+ * add_to_scan_list() and removed from the queue either after done
+ * processing or using remove_from_scan_list().
+ *
+ * returns 0.
+ **/
 static int scan_thread(void *data)
 {
-	ctlr_info_t *h = data;
-	int rc;
-	DECLARE_COMPLETION_ONSTACK(wait);
-	h->rescan_wait = &wait;
+	struct ctlr_info *h;
 
-	for (;;) {
-		rc = wait_for_completion_interruptible(&wait);
+	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule();
 		if (kthread_should_stop())
 			break;
-		if (!rc)
-			rebuild_lun_table(h, 0);
+
+		while (1) {
+			mutex_lock(&scan_mutex);
+			if (list_empty(&scan_q)) {
+				mutex_unlock(&scan_mutex);
+				break;
+			}
+
+			h = list_entry(scan_q.next,
+				       struct ctlr_info,
+				       scan_list);
+			list_del(&h->scan_list);
+			h->busy_scanning = 1;
+			mutex_unlock(&scan_mutex);
+
+			if (h) {
+				rebuild_lun_table(h, 0, 0);
+				complete_all(&h->scan_wait);
+				mutex_lock(&scan_mutex);
+				h->busy_scanning = 0;
+				mutex_unlock(&scan_mutex);
+			}
+		}
 	}
+
 	return 0;
 }
 
@@ -3268,8 +3600,8 @@
 	case REPORT_LUNS_CHANGED:
 		printk(KERN_WARNING "cciss%d: report LUN data "
 			"changed\n", h->ctlr);
-		if (h->rescan_wait)
-			complete(h->rescan_wait);
+		add_to_scan_list(h);
+		wake_up_process(cciss_scan_thread);
 		return 1;
 	break;
 	case POWER_OR_RESET:
@@ -3489,7 +3821,7 @@
 		if (scratchpad == CCISS_FIRMWARE_READY)
 			break;
 		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(HZ / 10);	/* wait 100ms */
+		schedule_timeout(msecs_to_jiffies(100));	/* wait 100ms */
 	}
 	if (scratchpad != CCISS_FIRMWARE_READY) {
 		printk(KERN_WARNING "cciss: Board not ready.  Timed out.\n");
@@ -3615,7 +3947,7 @@
 			break;
 		/* delay and try again */
 		set_current_state(TASK_INTERRUPTIBLE);
-		schedule_timeout(10);
+		schedule_timeout(msecs_to_jiffies(1));
 	}
 
 #ifdef CCISS_DEBUG
@@ -3669,15 +4001,16 @@
 	return -1;
 }
 
-static void free_hba(int i)
+static void free_hba(int n)
 {
-	ctlr_info_t *p = hba[i];
-	int n;
+	ctlr_info_t *h = hba[n];
+	int i;
 
-	hba[i] = NULL;
-	for (n = 0; n < CISS_MAX_LUN; n++)
-		put_disk(p->gendisk[n]);
-	kfree(p);
+	hba[n] = NULL;
+	for (i = 0; i < h->highest_lun + 1; i++)
+		if (h->gendisk[i] != NULL)
+			put_disk(h->gendisk[i]);
+	kfree(h);
 }
 
 /* Send a message CDB to the firmware. */
@@ -3918,6 +4251,7 @@
 	hba[i]->busy_initializing = 1;
 	INIT_HLIST_HEAD(&hba[i]->cmpQ);
 	INIT_HLIST_HEAD(&hba[i]->reqQ);
+	mutex_init(&hba[i]->busy_shutting_down);
 
 	if (cciss_pci_init(hba[i], pdev) != 0)
 		goto clean0;
@@ -3926,6 +4260,8 @@
 	hba[i]->ctlr = i;
 	hba[i]->pdev = pdev;
 
+	init_completion(&hba[i]->scan_wait);
+
 	if (cciss_create_hba_sysfs_entry(hba[i]))
 		goto clean0;
 
@@ -4001,8 +4337,7 @@
 	hba[i]->num_luns = 0;
 	hba[i]->highest_lun = -1;
 	for (j = 0; j < CISS_MAX_LUN; j++) {
-		hba[i]->drv[j].raid_level = -1;
-		hba[i]->drv[j].queue = NULL;
+		hba[i]->drv[j] = NULL;
 		hba[i]->gendisk[j] = NULL;
 	}
 
@@ -4035,14 +4370,8 @@
 
 	hba[i]->cciss_max_sectors = 2048;
 
+	rebuild_lun_table(hba[i], 1, 0);
 	hba[i]->busy_initializing = 0;
-
-	rebuild_lun_table(hba[i], 1);
-	hba[i]->cciss_scan_thread = kthread_run(scan_thread, hba[i],
-				"cciss_scan%02d", i);
-	if (IS_ERR(hba[i]->cciss_scan_thread))
-		return PTR_ERR(hba[i]->cciss_scan_thread);
-
 	return 1;
 
 clean4:
@@ -4063,12 +4392,7 @@
 	cciss_destroy_hba_sysfs_entry(hba[i]);
 clean0:
 	hba[i]->busy_initializing = 0;
-	/* cleanup any queues that may have been initialized */
-	for (j=0; j <= hba[i]->highest_lun; j++){
-		drive_info_struct *drv = &(hba[i]->drv[j]);
-		if (drv->queue)
-			blk_cleanup_queue(drv->queue);
-	}
+
 	/*
 	 * Deliberately omit pci_disable_device(): it does something nasty to
 	 * Smart Array controllers that pci_enable_device does not undo
@@ -4125,8 +4449,9 @@
 		return;
 	}
 
-	kthread_stop(hba[i]->cciss_scan_thread);
+	mutex_lock(&hba[i]->busy_shutting_down);
 
+	remove_from_scan_list(hba[i]);
 	remove_proc_entry(hba[i]->devname, proc_cciss);
 	unregister_blkdev(hba[i]->major, hba[i]->devname);
 
@@ -4136,8 +4461,10 @@
 		if (disk) {
 			struct request_queue *q = disk->queue;
 
-			if (disk->flags & GENHD_FL_UP)
+			if (disk->flags & GENHD_FL_UP) {
+				cciss_destroy_ld_sysfs_entry(hba[i], j, 1);
 				del_gendisk(disk);
+			}
 			if (q)
 				blk_cleanup_queue(q);
 		}
@@ -4170,6 +4497,7 @@
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
 	cciss_destroy_hba_sysfs_entry(hba[i]);
+	mutex_unlock(&hba[i]->busy_shutting_down);
 	free_hba(i);
 }
 
@@ -4202,15 +4530,25 @@
 	if (err)
 		return err;
 
+	/* Start the scan thread */
+	cciss_scan_thread = kthread_run(scan_thread, NULL, "cciss_scan");
+	if (IS_ERR(cciss_scan_thread)) {
+		err = PTR_ERR(cciss_scan_thread);
+		goto err_bus_unregister;
+	}
+
 	/* Register for our PCI devices */
 	err = pci_register_driver(&cciss_pci_driver);
 	if (err)
-		goto err_bus_register;
+		goto err_thread_stop;
 
-	return 0;
+	return err;
 
-err_bus_register:
+err_thread_stop:
+	kthread_stop(cciss_scan_thread);
+err_bus_unregister:
 	bus_unregister(&cciss_bus_type);
+
 	return err;
 }
 
@@ -4227,6 +4565,7 @@
 			cciss_remove_one(hba[i]->pdev);
 		}
 	}
+	kthread_stop(cciss_scan_thread);
 	remove_proc_entry("driver/cciss", NULL);
 	bus_unregister(&cciss_bus_type);
 }
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 06a5db2..31524cf 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -2,6 +2,7 @@
 #define CCISS_H
 
 #include <linux/genhd.h>
+#include <linux/mutex.h>
 
 #include "cciss_cmd.h"
 
@@ -29,7 +30,7 @@
 };
 typedef struct _drive_info_struct
 {
- 	__u32   LunID;	
+	unsigned char LunID[8];
 	int 	usage_count;
 	struct request_queue *queue;
 	sector_t nr_blocks;
@@ -51,6 +52,7 @@
 	char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
 	char model[MODEL_LEN + 1];   /* SCSI model string */
 	char rev[REV_LEN + 1];       /* SCSI revision string */
+	char device_initialized;     /* indicates whether dev is initialized */
 } drive_info_struct;
 
 struct ctlr_info 
@@ -86,7 +88,7 @@
 	BYTE	cciss_read_capacity;
 
 	// information about each logical volume
-	drive_info_struct drv[CISS_MAX_LUN];
+	drive_info_struct *drv[CISS_MAX_LUN];
 
 	struct access_method access;
 
@@ -108,6 +110,8 @@
 	int			nr_frees; 
 	int			busy_configuring;
 	int			busy_initializing;
+	int			busy_scanning;
+	struct mutex		busy_shutting_down;
 
 	/* This element holds the zero based queue number of the last
 	 * queue to be started.  It is used for fairness.
@@ -122,8 +126,8 @@
 	/* and saved for later processing */
 #endif
 	unsigned char alive;
-	struct completion *rescan_wait;
-	struct task_struct *cciss_scan_thread;
+	struct list_head scan_list;
+	struct completion scan_wait;
 	struct device dev;
 };
 
diff --git a/drivers/block/cpqarray.c b/drivers/block/cpqarray.c
index b82d438..6422651 100644
--- a/drivers/block/cpqarray.c
+++ b/drivers/block/cpqarray.c
@@ -32,6 +32,7 @@
 #include <linux/blkpg.h>
 #include <linux/timer.h>
 #include <linux/proc_fs.h>
+#include <linux/seq_file.h>
 #include <linux/init.h>
 #include <linux/hdreg.h>
 #include <linux/spinlock.h>
@@ -177,7 +178,6 @@
 
 #ifdef CONFIG_PROC_FS
 static void ida_procinit(int i);
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data);
 #else
 static void ida_procinit(int i) {}
 #endif
@@ -206,6 +206,7 @@
 #ifdef CONFIG_PROC_FS
 
 static struct proc_dir_entry *proc_array;
+static const struct file_operations ida_proc_fops;
 
 /*
  * Get us a file in /proc/array that says something about each controller.
@@ -218,19 +219,16 @@
 		if (!proc_array) return;
 	}
 
-	create_proc_read_entry(hba[i]->devname, 0, proc_array,
-			       ida_proc_get_info, hba[i]);
+	proc_create_data(hba[i]->devname, 0, proc_array, &ida_proc_fops, hba[i]);
 }
 
 /*
  * Report information about this controller.
  */
-static int ida_proc_get_info(char *buffer, char **start, off_t offset, int length, int *eof, void *data)
+static int ida_proc_show(struct seq_file *m, void *v)
 {
-	off_t pos = 0;
-	off_t len = 0;
-	int size, i, ctlr;
-	ctlr_info_t *h = (ctlr_info_t*)data;
+	int i, ctlr;
+	ctlr_info_t *h = (ctlr_info_t*)m->private;
 	drv_info_t *drv;
 #ifdef CPQ_PROC_PRINT_QUEUES
 	cmdlist_t *c;
@@ -238,7 +236,7 @@
 #endif
 
 	ctlr = h->ctlr;
-	size = sprintf(buffer, "%s:  Compaq %s Controller\n"
+	seq_printf(m, "%s:  Compaq %s Controller\n"
 		"       Board ID: 0x%08lx\n"
 		"       Firmware Revision: %c%c%c%c\n"
 		"       Controller Sig: 0x%08lx\n"
@@ -258,55 +256,54 @@
 		h->log_drives, h->phys_drives,
 		h->Qdepth, h->maxQsinceinit);
 
-	pos += size; len += size;
-	
-	size = sprintf(buffer+len, "Logical Drive Info:\n");
-	pos += size; len += size;
+	seq_puts(m, "Logical Drive Info:\n");
 
 	for(i=0; i<h->log_drives; i++) {
 		drv = &h->drv[i];
-		size = sprintf(buffer+len, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
+		seq_printf(m, "ida/c%dd%d: blksz=%d nr_blks=%d\n",
 				ctlr, i, drv->blk_size, drv->nr_blks);
-		pos += size; len += size;
 	}
 
 #ifdef CPQ_PROC_PRINT_QUEUES
 	spin_lock_irqsave(IDA_LOCK(h->ctlr), flags); 
-	size = sprintf(buffer+len, "\nCurrent Queues:\n");
-	pos += size; len += size;
+	seq_puts(m, "\nCurrent Queues:\n");
 
 	c = h->reqQ;
-	size = sprintf(buffer+len, "reqQ = %p", c); pos += size; len += size;
+	seq_printf(m, "reqQ = %p", c);
 	if (c) c=c->next;
 	while(c && c != h->reqQ) {
-		size = sprintf(buffer+len, "->%p", c);
-		pos += size; len += size;
+		seq_printf(m, "->%p", c);
 		c=c->next;
 	}
 
 	c = h->cmpQ;
-	size = sprintf(buffer+len, "\ncmpQ = %p", c); pos += size; len += size;
+	seq_printf(m, "\ncmpQ = %p", c);
 	if (c) c=c->next;
 	while(c && c != h->cmpQ) {
-		size = sprintf(buffer+len, "->%p", c);
-		pos += size; len += size;
+		seq_printf(m, "->%p", c);
 		c=c->next;
 	}
 
-	size = sprintf(buffer+len, "\n"); pos += size; len += size;
+	seq_putc(m, '\n');
 	spin_unlock_irqrestore(IDA_LOCK(h->ctlr), flags); 
 #endif
-	size = sprintf(buffer+len, "nr_allocs = %d\nnr_frees = %d\n",
+	seq_printf(m, "nr_allocs = %d\nnr_frees = %d\n",
 			h->nr_allocs, h->nr_frees);
-	pos += size; len += size;
-
-	*eof = 1;
-	*start = buffer+offset;
-	len -= offset;
-	if (len>length)
-		len = length;
-	return len;
+	return 0;
 }
+
+static int ida_proc_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ida_proc_show, PDE(inode)->data);
+}
+
+static const struct file_operations ida_proc_fops = {
+	.owner		= THIS_MODULE,
+	.open		= ida_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
 #endif /* CONFIG_PROC_FS */
 
 module_param_array(eisa, int, NULL, 0);
diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h
index d6f36c0..870f12c 100644
--- a/drivers/char/agp/agp.h
+++ b/drivers/char/agp/agp.h
@@ -131,7 +131,7 @@
 struct agp_bridge_data {
 	const struct agp_version *version;
 	const struct agp_bridge_driver *driver;
-	struct vm_operations_struct *vm_ops;
+	const struct vm_operations_struct *vm_ops;
 	void *previous_size;
 	void *current_size;
 	void *dev_private_data;
diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c
index 5ea4da8..dd84af4 100644
--- a/drivers/char/agp/alpha-agp.c
+++ b/drivers/char/agp/alpha-agp.c
@@ -40,7 +40,7 @@
 	{ 0, 0, 0 }, /* filled in by alpha_core_agp_setup */
 };
 
-struct vm_operations_struct alpha_core_agp_vm_ops = {
+static const struct vm_operations_struct alpha_core_agp_vm_ops = {
 	.fault = alpha_core_agp_vm_fault,
 };
 
diff --git a/drivers/char/apm-emulation.c b/drivers/char/apm-emulation.c
index aaca402..4f568cb 100644
--- a/drivers/char/apm-emulation.c
+++ b/drivers/char/apm-emulation.c
@@ -393,7 +393,7 @@
 	return as ? 0 : -ENOMEM;
 }
 
-static struct file_operations apm_bios_fops = {
+static const struct file_operations apm_bios_fops = {
 	.owner		= THIS_MODULE,
 	.read		= apm_read,
 	.poll		= apm_poll,
diff --git a/drivers/char/bfin-otp.c b/drivers/char/bfin-otp.c
index e3dd24b..836d4f0 100644
--- a/drivers/char/bfin-otp.c
+++ b/drivers/char/bfin-otp.c
@@ -217,7 +217,7 @@
 # define bfin_otp_ioctl NULL
 #endif
 
-static struct file_operations bfin_otp_fops = {
+static const struct file_operations bfin_otp_fops = {
 	.owner          = THIS_MODULE,
 	.unlocked_ioctl = bfin_otp_ioctl,
 	.read           = bfin_otp_read,
diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c
index df5038b..4254457 100644
--- a/drivers/char/cyclades.c
+++ b/drivers/char/cyclades.c
@@ -3354,7 +3354,7 @@
 			continue;
 		}
 #ifdef MODULE
-		if (isparam && irq[i])
+		if (isparam && i < NR_CARDS && irq[i])
 			cy_isa_irq = irq[i];
 		else
 #endif
diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c
index 52e0658..045c930 100644
--- a/drivers/char/dtlk.c
+++ b/drivers/char/dtlk.c
@@ -56,6 +56,7 @@
 #include <linux/errno.h>	/* for -EBUSY */
 #include <linux/ioport.h>	/* for request_region */
 #include <linux/delay.h>	/* for loops_per_jiffy */
+#include <linux/sched.h>
 #include <linux/smp_lock.h>	/* cycle_kernel_lock() */
 #include <asm/io.h>		/* for inb_p, outb_p, inb, outb, etc. */
 #include <asm/uaccess.h>	/* for get_user, etc. */
diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c
index 25ce15b..a632f25 100644
--- a/drivers/char/hvc_console.c
+++ b/drivers/char/hvc_console.c
@@ -678,7 +678,7 @@
 EXPORT_SYMBOL_GPL(hvc_poll);
 
 /**
- * hvc_resize() - Update terminal window size information.
+ * __hvc_resize() - Update terminal window size information.
  * @hp:		HVC console pointer
  * @ws:		Terminal window size structure
  *
@@ -687,12 +687,12 @@
  *
  * Locking:	Locking free; the function MUST be called holding hp->lock
  */
-void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+void __hvc_resize(struct hvc_struct *hp, struct winsize ws)
 {
 	hp->ws = ws;
 	schedule_work(&hp->tty_resize);
 }
-EXPORT_SYMBOL_GPL(hvc_resize);
+EXPORT_SYMBOL_GPL(__hvc_resize);
 
 /*
  * This kthread is either polling or interrupt driven.  This is determined by
diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h
index 3c85d78..10950ca 100644
--- a/drivers/char/hvc_console.h
+++ b/drivers/char/hvc_console.h
@@ -28,6 +28,7 @@
 #define HVC_CONSOLE_H
 #include <linux/kref.h>
 #include <linux/tty.h>
+#include <linux/spinlock.h>
 
 /*
  * This is the max number of console adapters that can/will be found as
@@ -88,7 +89,16 @@
 void hvc_kick(void);
 
 /* Resize hvc tty terminal window */
-extern void hvc_resize(struct hvc_struct *hp, struct winsize ws);
+extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
+
+static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&hp->lock, flags);
+	__hvc_resize(hp, ws);
+	spin_unlock_irqrestore(&hp->lock, flags);
+}
 
 /* default notifier for irq based notification */
 extern int notifier_add_irq(struct hvc_struct *hp, int data);
diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c
index 0ecac7e..b8a5d65 100644
--- a/drivers/char/hvc_iucv.c
+++ b/drivers/char/hvc_iucv.c
@@ -273,7 +273,9 @@
 	case MSG_TYPE_WINSIZE:
 		if (rb->mbuf->datalen != sizeof(struct winsize))
 			break;
-		hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
+		/* The caller must ensure that the hvc is locked, which
+		 * is the case when called from hvc_iucv_get_chars() */
+		__hvc_resize(priv->hvc, *((struct winsize *) rb->mbuf->data));
 		break;
 
 	case MSG_TYPE_ERROR:	/* ignored ... */
diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c
index 00dd3de..06aad08 100644
--- a/drivers/char/hw_random/omap-rng.c
+++ b/drivers/char/hw_random/omap-rng.c
@@ -116,7 +116,7 @@
 	if (!res)
 		return -ENOENT;
 
-	mem = request_mem_region(res->start, res->end - res->start + 1,
+	mem = request_mem_region(res->start, resource_size(res),
 				 pdev->name);
 	if (mem == NULL) {
 		ret = -EBUSY;
@@ -124,7 +124,7 @@
 	}
 
 	dev_set_drvdata(&pdev->dev, mem);
-	rng_base = ioremap(res->start, res->end - res->start + 1);
+	rng_base = ioremap(res->start, resource_size(res));
 	if (!rng_base) {
 		ret = -ENOMEM;
 		goto err_ioremap;
diff --git a/drivers/char/ipmi/ipmi_devintf.c b/drivers/char/ipmi/ipmi_devintf.c
index 41fc11d..65545de 100644
--- a/drivers/char/ipmi/ipmi_devintf.c
+++ b/drivers/char/ipmi/ipmi_devintf.c
@@ -36,6 +36,7 @@
 #include <linux/errno.h>
 #include <asm/system.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/ipmi.h>
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index 0905079..ec5e3f8 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -35,6 +35,7 @@
 #include <linux/errno.h>
 #include <asm/system.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
diff --git a/drivers/char/mem.c b/drivers/char/mem.c
index 6c8b65d..a074fce 100644
--- a/drivers/char/mem.c
+++ b/drivers/char/mem.c
@@ -301,7 +301,7 @@
 }
 #endif
 
-static struct vm_operations_struct mmap_mem_ops = {
+static const struct vm_operations_struct mmap_mem_ops = {
 #ifdef CONFIG_HAVE_IOREMAP_PROT
 	.access = generic_access_phys
 #endif
diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c
index 30f095a..1997270 100644
--- a/drivers/char/mspec.c
+++ b/drivers/char/mspec.c
@@ -239,7 +239,7 @@
 	return VM_FAULT_NOPAGE;
 }
 
-static struct vm_operations_struct mspec_vm_ops = {
+static const struct vm_operations_struct mspec_vm_ops = {
 	.open = mspec_open,
 	.close = mspec_close,
 	.fault = mspec_fault,
diff --git a/drivers/char/pty.c b/drivers/char/pty.c
index 53761ce..e066c4f 100644
--- a/drivers/char/pty.c
+++ b/drivers/char/pty.c
@@ -261,6 +261,9 @@
 	return 0;
 }
 
+/* Traditional BSD devices */
+#ifdef CONFIG_LEGACY_PTYS
+
 static int pty_install(struct tty_driver *driver, struct tty_struct *tty)
 {
 	struct tty_struct *o_tty;
@@ -310,24 +313,6 @@
 	return -ENOMEM;
 }
 
-
-static const struct tty_operations pty_ops = {
-	.install = pty_install,
-	.open = pty_open,
-	.close = pty_close,
-	.write = pty_write,
-	.write_room = pty_write_room,
-	.flush_buffer = pty_flush_buffer,
-	.chars_in_buffer = pty_chars_in_buffer,
-	.unthrottle = pty_unthrottle,
-	.set_termios = pty_set_termios,
-	.resize = pty_resize
-};
-
-/* Traditional BSD devices */
-#ifdef CONFIG_LEGACY_PTYS
-static struct tty_driver *pty_driver, *pty_slave_driver;
-
 static int pty_bsd_ioctl(struct tty_struct *tty, struct file *file,
 			 unsigned int cmd, unsigned long arg)
 {
@@ -341,7 +326,12 @@
 static int legacy_count = CONFIG_LEGACY_PTY_COUNT;
 module_param(legacy_count, int, 0);
 
-static const struct tty_operations pty_ops_bsd = {
+/*
+ * The master side of a pty can do TIOCSPTLCK and thus
+ * has pty_bsd_ioctl.
+ */
+static const struct tty_operations master_pty_ops_bsd = {
+	.install = pty_install,
 	.open = pty_open,
 	.close = pty_close,
 	.write = pty_write,
@@ -354,8 +344,23 @@
 	.resize = pty_resize
 };
 
+static const struct tty_operations slave_pty_ops_bsd = {
+	.install = pty_install,
+	.open = pty_open,
+	.close = pty_close,
+	.write = pty_write,
+	.write_room = pty_write_room,
+	.flush_buffer = pty_flush_buffer,
+	.chars_in_buffer = pty_chars_in_buffer,
+	.unthrottle = pty_unthrottle,
+	.set_termios = pty_set_termios,
+	.resize = pty_resize
+};
+
 static void __init legacy_pty_init(void)
 {
+	struct tty_driver *pty_driver, *pty_slave_driver;
+
 	if (legacy_count <= 0)
 		return;
 
@@ -383,7 +388,7 @@
 	pty_driver->init_termios.c_ospeed = 38400;
 	pty_driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_REAL_RAW;
 	pty_driver->other = pty_slave_driver;
-	tty_set_operations(pty_driver, &pty_ops);
+	tty_set_operations(pty_driver, &master_pty_ops_bsd);
 
 	pty_slave_driver->owner = THIS_MODULE;
 	pty_slave_driver->driver_name = "pty_slave";
@@ -399,7 +404,7 @@
 	pty_slave_driver->flags = TTY_DRIVER_RESET_TERMIOS |
 					TTY_DRIVER_REAL_RAW;
 	pty_slave_driver->other = pty_driver;
-	tty_set_operations(pty_slave_driver, &pty_ops);
+	tty_set_operations(pty_slave_driver, &slave_pty_ops_bsd);
 
 	if (tty_register_driver(pty_driver))
 		panic("Couldn't register pty driver");
diff --git a/drivers/char/serial167.c b/drivers/char/serial167.c
index 5942a9d..452370a 100644
--- a/drivers/char/serial167.c
+++ b/drivers/char/serial167.c
@@ -220,8 +220,7 @@
 		return 1;
 	}
 
-	if ((long)info < (long)(&cy_port[0])
-	    || (long)(&cy_port[NR_PORTS]) < (long)info) {
+	if (info < &cy_port[0] || info >= &cy_port[NR_PORTS]) {
 		printk("Warning: cyclades_port out of range for (%s) in %s\n",
 				name, routine);
 		return 1;
@@ -520,15 +519,13 @@
 		panic("TxInt on debug port!!!");
 	}
 #endif
-
-	info = &cy_port[channel];
-
 	/* validate the port number (as configured and open) */
 	if ((channel < 0) || (NR_PORTS <= channel)) {
 		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
 		base_addr[CyTEOIR] = CyNOTRANS;
 		return IRQ_HANDLED;
 	}
+	info = &cy_port[channel];
 	info->last_active = jiffies;
 	if (info->tty == 0) {
 		base_addr[CyIER] &= ~(CyTxMpty | CyTxRdy);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index ea18a12..59499ee 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1389,7 +1389,7 @@
  *	of ttys that the driver keeps.
  *
  *	This method gets called from a work queue so that the driver private
- *	shutdown ops can sleep (needed for USB at least)
+ *	cleanup ops can sleep (needed for USB at least)
  */
 static void release_one_tty(struct work_struct *work)
 {
@@ -1397,10 +1397,9 @@
 		container_of(work, struct tty_struct, hangup_work);
 	struct tty_driver *driver = tty->driver;
 
-	if (tty->ops->shutdown)
-		tty->ops->shutdown(tty);
-	else
-		tty_shutdown(tty);
+	if (tty->ops->cleanup)
+		tty->ops->cleanup(tty);
+
 	tty->magic = 0;
 	tty_driver_kref_put(driver);
 	module_put(driver->owner);
@@ -1415,6 +1414,12 @@
 static void queue_release_one_tty(struct kref *kref)
 {
 	struct tty_struct *tty = container_of(kref, struct tty_struct, kref);
+
+	if (tty->ops->shutdown)
+		tty->ops->shutdown(tty);
+	else
+		tty_shutdown(tty);
+
 	/* The hangup queue is now free so we can reuse it rather than
 	   waste a chunk of memory for each port */
 	INIT_WORK(&tty->hangup_work, release_one_tty);
diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c
index aafdbae..feb5507 100644
--- a/drivers/char/tty_ldisc.c
+++ b/drivers/char/tty_ldisc.c
@@ -518,7 +518,7 @@
 static int tty_ldisc_halt(struct tty_struct *tty)
 {
 	clear_bit(TTY_LDISC, &tty->flags);
-	return cancel_delayed_work(&tty->buf.work);
+	return cancel_delayed_work_sync(&tty->buf.work);
 }
 
 /**
@@ -756,12 +756,9 @@
 	 * N_TTY.
 	 */
 	if (tty->driver->flags & TTY_DRIVER_RESET_TERMIOS) {
-		/* Make sure the old ldisc is quiescent */
-		tty_ldisc_halt(tty);
-		flush_scheduled_work();
-
 		/* Avoid racing set_ldisc or tty_ldisc_release */
 		mutex_lock(&tty->ldisc_mutex);
+		tty_ldisc_halt(tty);
 		if (tty->ldisc) {	/* Not yet closed */
 			/* Switch back to N_TTY */
 			tty_ldisc_reinit(tty);
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index 29c651a..6b36ee5 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -981,8 +981,10 @@
 			goto eperm;
 
 		if (copy_from_user(&vsa, (struct vt_setactivate __user *)arg,
-						sizeof(struct vt_setactivate)))
-			return -EFAULT;
+					sizeof(struct vt_setactivate))) {
+			ret = -EFAULT;
+			goto out;
+		}
 		if (vsa.console == 0 || vsa.console > MAX_NR_CONSOLES)
 			ret = -ENXIO;
 		else {
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index f40ab69..4846d50 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -559,7 +559,7 @@
 	return status;
 }
 
-static struct file_operations hwicap_fops = {
+static const struct file_operations hwicap_fops = {
 	.owner = THIS_MODULE,
 	.write = hwicap_write,
 	.read = hwicap_read,
diff --git a/drivers/firewire/core-cdev.c b/drivers/firewire/core-cdev.c
index ced186d..5089331 100644
--- a/drivers/firewire/core-cdev.c
+++ b/drivers/firewire/core-cdev.c
@@ -33,6 +33,7 @@
 #include <linux/mutex.h>
 #include <linux/poll.h>
 #include <linux/preempt.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/time.h>
 #include <linux/uaccess.h>
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index bb11a42..662ed92 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -1487,7 +1487,7 @@
 	return single_open(file, gpiolib_show, NULL);
 }
 
-static struct file_operations gpiolib_operations = {
+static const struct file_operations gpiolib_operations = {
 	.open		= gpiolib_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c
index ba728ad..8e7b0eb 100644
--- a/drivers/gpu/drm/drm_crtc.c
+++ b/drivers/gpu/drm/drm_crtc.c
@@ -482,6 +482,7 @@
 	list_for_each_entry_safe(mode, t, &connector->user_modes, head)
 		drm_mode_remove(connector, mode);
 
+	kfree(connector->fb_helper_private);
 	mutex_lock(&dev->mode_config.mutex);
 	drm_mode_object_put(dev, &connector->base);
 	list_del(&connector->head);
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index fe86974..1fe4e1d 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -32,6 +32,7 @@
 #include "drmP.h"
 #include "drm_crtc.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 
 static void drm_mode_validate_flag(struct drm_connector *connector,
 				   int flags)
@@ -90,7 +91,15 @@
 	list_for_each_entry_safe(mode, t, &connector->modes, head)
 		mode->status = MODE_UNVERIFIED;
 
-	connector->status = connector->funcs->detect(connector);
+	if (connector->force) {
+		if (connector->force == DRM_FORCE_ON)
+			connector->status = connector_status_connected;
+		else
+			connector->status = connector_status_disconnected;
+		if (connector->funcs->force)
+			connector->funcs->force(connector);
+	} else
+		connector->status = connector->funcs->detect(connector);
 
 	if (connector->status == connector_status_disconnected) {
 		DRM_DEBUG_KMS("%s is disconnected\n",
@@ -267,6 +276,65 @@
 	return NULL;
 }
 
+static bool drm_has_cmdline_mode(struct drm_connector *connector)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	return cmdline_mode->specified;
+}
+
+static struct drm_display_mode *drm_pick_cmdline_mode(struct drm_connector *connector, int width, int height)
+{
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+	struct drm_display_mode *mode = NULL;
+
+	if (!fb_help_conn)
+		return mode;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (cmdline_mode->specified == false)
+		return mode;
+
+	/* attempt to find a matching mode in the list of modes
+	 *  we have gotten so far, if not add a CVT mode that conforms
+	 */
+	if (cmdline_mode->rb || cmdline_mode->margins)
+		goto create_mode;
+
+	list_for_each_entry(mode, &connector->modes, head) {
+		/* check width/height */
+		if (mode->hdisplay != cmdline_mode->xres ||
+		    mode->vdisplay != cmdline_mode->yres)
+			continue;
+
+		if (cmdline_mode->refresh_specified) {
+			if (mode->vrefresh != cmdline_mode->refresh)
+				continue;
+		}
+
+		if (cmdline_mode->interlace) {
+			if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
+				continue;
+		}
+		return mode;
+	}
+
+create_mode:
+	mode = drm_cvt_mode(connector->dev, cmdline_mode->xres,
+			    cmdline_mode->yres,
+			    cmdline_mode->refresh_specified ? cmdline_mode->refresh : 60,
+			    cmdline_mode->rb, cmdline_mode->interlace,
+			    cmdline_mode->margins);
+	list_add(&mode->head, &connector->modes);
+	return mode;
+}
+
 static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
 {
 	bool enable;
@@ -317,10 +385,16 @@
 			continue;
 		}
 
-		DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
-			  connector->base.id);
+		DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
+			      connector->base.id);
 
-		modes[i] = drm_has_preferred_mode(connector, width, height);
+		/* got for command line mode first */
+		modes[i] = drm_pick_cmdline_mode(connector, width, height);
+		if (!modes[i]) {
+			DRM_DEBUG_KMS("looking for preferred mode on connector %d\n",
+				      connector->base.id);
+			modes[i] = drm_has_preferred_mode(connector, width, height);
+		}
 		/* No preferred modes, pick one off the list */
 		if (!modes[i] && !list_empty(&connector->modes)) {
 			list_for_each_entry(modes[i], &connector->modes, head)
@@ -369,6 +443,8 @@
 	my_score = 1;
 	if (connector->status == connector_status_connected)
 		my_score++;
+	if (drm_has_cmdline_mode(connector))
+		my_score++;
 	if (drm_has_preferred_mode(connector, width, height))
 		my_score++;
 
@@ -943,6 +1019,8 @@
 {
 	int count = 0;
 
+	drm_fb_helper_parse_command_line(dev);
+
 	count = drm_helper_probe_connector_modes(dev,
 						 dev->mode_config.max_width,
 						 dev->mode_config.max_height);
@@ -950,7 +1028,7 @@
 	/*
 	 * we shouldn't end up with no modes here.
 	 */
-	WARN(!count, "Connected connector with 0 modes\n");
+	WARN(!count, "No connectors reported connected with modes\n");
 
 	drm_setup_crtcs(dev);
 
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index 90d76ba..3c0d2b3 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -109,7 +109,9 @@
 
 
 /* Valid EDID header has these bytes */
-static u8 edid_header[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00 };
+static const u8 edid_header[] = {
+	0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00
+};
 
 /**
  * edid_is_valid - sanity check EDID data
@@ -500,6 +502,19 @@
 	}
 	return mode;
 }
+
+/*
+ * 0 is reserved.  The spec says 0x01 fill for unused timings.  Some old
+ * monitors fill with ascii space (0x20) instead.
+ */
+static int
+bad_std_timing(u8 a, u8 b)
+{
+	return (a == 0x00 && b == 0x00) ||
+	       (a == 0x01 && b == 0x01) ||
+	       (a == 0x20 && b == 0x20);
+}
+
 /**
  * drm_mode_std - convert standard mode info (width, height, refresh) into mode
  * @t: standard timing params
@@ -513,6 +528,7 @@
  */
 struct drm_display_mode *drm_mode_std(struct drm_device *dev,
 				      struct std_timing *t,
+				      int revision,
 				      int timing_level)
 {
 	struct drm_display_mode *mode;
@@ -523,14 +539,20 @@
 	unsigned vfreq = (t->vfreq_aspect & EDID_TIMING_VFREQ_MASK)
 		>> EDID_TIMING_VFREQ_SHIFT;
 
+	if (bad_std_timing(t->hsize, t->vfreq_aspect))
+		return NULL;
+
 	/* According to the EDID spec, the hdisplay = hsize * 8 + 248 */
 	hsize = t->hsize * 8 + 248;
 	/* vrefresh_rate = vfreq + 60 */
 	vrefresh_rate = vfreq + 60;
 	/* the vdisplay is calculated based on the aspect ratio */
-	if (aspect_ratio == 0)
-		vsize = (hsize * 10) / 16;
-	else if (aspect_ratio == 1)
+	if (aspect_ratio == 0) {
+		if (revision < 3)
+			vsize = hsize;
+		else
+			vsize = (hsize * 10) / 16;
+	} else if (aspect_ratio == 1)
 		vsize = (hsize * 3) / 4;
 	else if (aspect_ratio == 2)
 		vsize = (hsize * 4) / 5;
@@ -538,7 +560,8 @@
 		vsize = (hsize * 9) / 16;
 	/* HDTV hack */
 	if (hsize == 1360 && vsize == 765 && vrefresh_rate == 60) {
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		mode->hdisplay = 1366;
 		mode->vsync_start = mode->vsync_start - 1;
 		mode->vsync_end = mode->vsync_end - 1;
@@ -557,7 +580,8 @@
 		mode = drm_gtf_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
 		break;
 	case LEVEL_CVT:
-		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0);
+		mode = drm_cvt_mode(dev, hsize, vsize, vrefresh_rate, 0, 0,
+				    false);
 		break;
 	}
 	return mode;
@@ -779,7 +803,7 @@
 			continue;
 
 		newmode = drm_mode_std(dev, &edid->standard_timings[i],
-					timing_level);
+				       edid->revision, timing_level);
 		if (newmode) {
 			drm_mode_probed_add(connector, newmode);
 			modes++;
@@ -829,13 +853,13 @@
 			case EDID_DETAIL_MONITOR_CPDATA:
 				break;
 			case EDID_DETAIL_STD_MODES:
-				/* Five modes per detailed section */
-				for (j = 0; j < 5; i++) {
+				for (j = 0; j < 6; i++) {
 					struct std_timing *std;
 					struct drm_display_mode *newmode;
 
 					std = &data->data.timings[j];
 					newmode = drm_mode_std(dev, std,
+							       edid->revision,
 							       timing_level);
 					if (newmode) {
 						drm_mode_probed_add(connector, newmode);
@@ -964,7 +988,9 @@
 				struct drm_display_mode *newmode;
 
 				std = &data->data.timings[j];
-				newmode = drm_mode_std(dev, std, timing_level);
+				newmode = drm_mode_std(dev, std,
+						       edid->revision,
+						       timing_level);
 				if (newmode) {
 					drm_mode_probed_add(connector, newmode);
 					modes++;
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 2c46713..819ddcb 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -40,6 +40,199 @@
 
 static LIST_HEAD(kernel_fb_helper_list);
 
+int drm_fb_helper_add_connector(struct drm_connector *connector)
+{
+	connector->fb_helper_private = kzalloc(sizeof(struct drm_fb_helper_connector), GFP_KERNEL);
+	if (!connector->fb_helper_private)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL(drm_fb_helper_add_connector);
+
+static int my_atoi(const char *name)
+{
+	int val = 0;
+
+	for (;; name++) {
+		switch (*name) {
+		case '0' ... '9':
+			val = 10*val+(*name-'0');
+			break;
+		default:
+			return val;
+		}
+	}
+}
+
+/**
+ * drm_fb_helper_connector_parse_command_line - parse command line for connector
+ * @connector - connector to parse line for
+ * @mode_option - per connector mode option
+ *
+ * This parses the connector specific then generic command lines for
+ * modes and options to configure the connector.
+ *
+ * This uses the same parameters as the fb modedb.c, except for extra
+ *	<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ *
+ * enable/enable Digital/disable bit at the end
+ */
+static bool drm_fb_helper_connector_parse_command_line(struct drm_connector *connector,
+						       const char *mode_option)
+{
+	const char *name;
+	unsigned int namelen;
+	int res_specified = 0, bpp_specified = 0, refresh_specified = 0;
+	unsigned int xres = 0, yres = 0, bpp = 32, refresh = 0;
+	int yres_specified = 0, cvt = 0, rb = 0, interlace = 0, margins = 0;
+	int i;
+	enum drm_connector_force force = DRM_FORCE_UNSPECIFIED;
+	struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+	struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+	if (!fb_help_conn)
+		return false;
+
+	cmdline_mode = &fb_help_conn->cmdline_mode;
+	if (!mode_option)
+		mode_option = fb_mode_option;
+
+	if (!mode_option) {
+		cmdline_mode->specified = false;
+		return false;
+	}
+
+	name = mode_option;
+	namelen = strlen(name);
+	for (i = namelen-1; i >= 0; i--) {
+		switch (name[i]) {
+		case '@':
+			namelen = i;
+			if (!refresh_specified && !bpp_specified &&
+			    !yres_specified) {
+				refresh = my_atoi(&name[i+1]);
+				refresh_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case '-':
+			namelen = i;
+			if (!bpp_specified && !yres_specified) {
+				bpp = my_atoi(&name[i+1]);
+				bpp_specified = 1;
+				if (cvt || rb)
+					cvt = 0;
+			} else
+				goto done;
+			break;
+		case 'x':
+			if (!yres_specified) {
+				yres = my_atoi(&name[i+1]);
+				yres_specified = 1;
+			} else
+				goto done;
+		case '0' ... '9':
+			break;
+		case 'M':
+			if (!yres_specified)
+				cvt = 1;
+			break;
+		case 'R':
+			if (!cvt)
+				rb = 1;
+			break;
+		case 'm':
+			if (!cvt)
+				margins = 1;
+			break;
+		case 'i':
+			if (!cvt)
+				interlace = 1;
+			break;
+		case 'e':
+			force = DRM_FORCE_ON;
+			break;
+		case 'D':
+			if ((connector->connector_type != DRM_MODE_CONNECTOR_DVII) ||
+			    (connector->connector_type != DRM_MODE_CONNECTOR_HDMIB))
+				force = DRM_FORCE_ON;
+			else
+				force = DRM_FORCE_ON_DIGITAL;
+			break;
+		case 'd':
+			force = DRM_FORCE_OFF;
+			break;
+		default:
+			goto done;
+		}
+	}
+	if (i < 0 && yres_specified) {
+		xres = my_atoi(name);
+		res_specified = 1;
+	}
+done:
+
+	DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+		drm_get_connector_name(connector), xres, yres,
+		(refresh) ? refresh : 60, (rb) ? " reduced blanking" :
+		"", (margins) ? " with margins" : "", (interlace) ?
+		" interlaced" : "");
+
+	if (force) {
+		const char *s;
+		switch (force) {
+		case DRM_FORCE_OFF: s = "OFF"; break;
+		case DRM_FORCE_ON_DIGITAL: s = "ON - dig"; break;
+		default:
+		case DRM_FORCE_ON: s = "ON"; break;
+		}
+
+		DRM_INFO("forcing %s connector %s\n",
+			 drm_get_connector_name(connector), s);
+		connector->force = force;
+	}
+
+	if (res_specified) {
+		cmdline_mode->specified = true;
+		cmdline_mode->xres = xres;
+		cmdline_mode->yres = yres;
+	}
+
+	if (refresh_specified) {
+		cmdline_mode->refresh_specified = true;
+		cmdline_mode->refresh = refresh;
+	}
+
+	if (bpp_specified) {
+		cmdline_mode->bpp_specified = true;
+		cmdline_mode->bpp = bpp;
+	}
+	cmdline_mode->rb = rb ? true : false;
+	cmdline_mode->cvt = cvt  ? true : false;
+	cmdline_mode->interlace = interlace ? true : false;
+
+	return true;
+}
+
+int drm_fb_helper_parse_command_line(struct drm_device *dev)
+{
+	struct drm_connector *connector;
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		char *option = NULL;
+
+		/* do something on return - turn off connector maybe */
+		if (fb_get_options(drm_get_connector_name(connector), &option))
+			continue;
+
+		drm_fb_helper_connector_parse_command_line(connector, option);
+	}
+	return 0;
+}
+
 bool drm_fb_helper_force_kernel_mode(void)
 {
 	int i = 0;
@@ -87,6 +280,7 @@
 }
 EXPORT_SYMBOL(drm_fb_helper_restore);
 
+#ifdef CONFIG_MAGIC_SYSRQ
 static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
 {
 	drm_fb_helper_restore();
@@ -103,6 +297,7 @@
 	.help_msg = "force-fb(V)",
 	.action_msg = "Restore framebuffer console",
 };
+#endif
 
 static void drm_fb_helper_on(struct fb_info *info)
 {
@@ -484,6 +679,8 @@
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr))
 {
 	struct drm_crtc *crtc;
@@ -497,8 +694,43 @@
 	struct drm_framebuffer *fb;
 	struct drm_mode_set *modeset = NULL;
 	struct drm_fb_helper *fb_helper;
+	uint32_t surface_depth = 24, surface_bpp = 32;
 
 	/* first up get a count of crtcs now in use and new min/maxes width/heights */
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+		struct drm_fb_helper_connector *fb_help_conn = connector->fb_helper_private;
+
+		struct drm_fb_helper_cmdline_mode *cmdline_mode;
+
+		if (!fb_help_conn)
+			continue;
+		
+		cmdline_mode = &fb_help_conn->cmdline_mode;
+
+		if (cmdline_mode->bpp_specified) {
+			switch (cmdline_mode->bpp) {
+			case 8:
+				surface_depth = surface_bpp = 8;
+				break;
+			case 15:
+				surface_depth = 15;
+				surface_bpp = 16;
+				break;
+			case 16:
+				surface_depth = surface_bpp = 16;
+				break;
+			case 24:
+				surface_depth = surface_bpp = 24;
+				break;
+			case 32:
+				surface_depth = 24;
+				surface_bpp = 32;
+				break;
+			}
+			break;
+		}
+	}
+
 	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
 		if (drm_helper_crtc_in_use(crtc)) {
 			if (crtc->desired_mode) {
@@ -527,7 +759,8 @@
 	/* do we have an fb already? */
 	if (list_empty(&dev->mode_config.fb_kernel_list)) {
 		ret = (*fb_create)(dev, fb_width, fb_height, surface_width,
-				   surface_height, &fb);
+				   surface_height, surface_depth, surface_bpp,
+				   &fb);
 		if (ret)
 			return -EINVAL;
 		new_fb = 1;
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 49404ce..51f6772 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -88,7 +88,7 @@
 #define HV_FACTOR			1000
 struct drm_display_mode *drm_cvt_mode(struct drm_device *dev, int hdisplay,
 				      int vdisplay, int vrefresh,
-				      bool reduced, bool interlaced)
+				      bool reduced, bool interlaced, bool margins)
 {
 	/* 1) top/bottom margin size (% of height) - default: 1.8, */
 #define	CVT_MARGIN_PERCENTAGE		18
@@ -101,7 +101,6 @@
 	/* Pixel Clock step (kHz) */
 #define CVT_CLOCK_STEP			250
 	struct drm_display_mode *drm_mode;
-	bool margins = false;
 	unsigned int vfieldrate, hperiod;
 	int hdisplay_rnd, hmargin, vdisplay_rnd, vmargin, vsync;
 	int interlace;
diff --git a/drivers/gpu/drm/drm_vm.c b/drivers/gpu/drm/drm_vm.c
index 7e1fbe5..4ac900f 100644
--- a/drivers/gpu/drm/drm_vm.c
+++ b/drivers/gpu/drm/drm_vm.c
@@ -369,28 +369,28 @@
 }
 
 /** AGP virtual memory operations */
-static struct vm_operations_struct drm_vm_ops = {
+static const struct vm_operations_struct drm_vm_ops = {
 	.fault = drm_vm_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
 };
 
 /** Shared virtual memory operations */
-static struct vm_operations_struct drm_vm_shm_ops = {
+static const struct vm_operations_struct drm_vm_shm_ops = {
 	.fault = drm_vm_shm_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_shm_close,
 };
 
 /** DMA virtual memory operations */
-static struct vm_operations_struct drm_vm_dma_ops = {
+static const struct vm_operations_struct drm_vm_dma_ops = {
 	.fault = drm_vm_dma_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
 };
 
 /** Scatter-gather virtual memory operations */
-static struct vm_operations_struct drm_vm_sg_ops = {
+static const struct vm_operations_struct drm_vm_sg_ops = {
 	.fault = drm_vm_sg_fault,
 	.open = drm_vm_open,
 	.close = drm_vm_close,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 7ba4a23..e85d7e9 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -110,6 +110,7 @@
 static int intelfb_create(struct drm_device *dev, uint32_t fb_width,
 			  uint32_t fb_height, uint32_t surface_width,
 			  uint32_t surface_height,
+			  uint32_t surface_depth, uint32_t surface_bpp,
 			  struct drm_framebuffer **fb_p)
 {
 	struct fb_info *info;
@@ -125,9 +126,9 @@
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
 
-	mode_cmd.bpp = 32;
+	mode_cmd.bpp = surface_bpp;
 	mode_cmd.pitch = ALIGN(mode_cmd.width * ((mode_cmd.bpp + 1) / 8), 64);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	size = ALIGN(size, PAGE_SIZE);
diff --git a/drivers/gpu/drm/radeon/.gitignore b/drivers/gpu/drm/radeon/.gitignore
new file mode 100644
index 0000000..403eb3a
--- /dev/null
+++ b/drivers/gpu/drm/radeon/.gitignore
@@ -0,0 +1,3 @@
+mkregtable
+*_reg_safe.h
+
diff --git a/drivers/gpu/drm/radeon/avivod.h b/drivers/gpu/drm/radeon/avivod.h
index e2b92c4..d4e6e6e 100644
--- a/drivers/gpu/drm/radeon/avivod.h
+++ b/drivers/gpu/drm/radeon/avivod.h
@@ -57,13 +57,4 @@
 #define	VGA_RENDER_CONTROL				0x0300
 #define		VGA_VSTATUS_CNTL_MASK				0x00030000
 
-/* AVIVO disable VGA rendering */
-static inline void radeon_avivo_vga_render_disable(struct radeon_device *rdev)
-{
-	u32 vga_render;
-	vga_render = RREG32(VGA_RENDER_CONTROL);
-	vga_render &= ~VGA_VSTATUS_CNTL_MASK;
-	WREG32(VGA_RENDER_CONTROL, vga_render);
-}
-
 #endif
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index be51c5f..e6cce24 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -863,13 +863,11 @@
 void r100_cs_dump_packet(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	volatile uint32_t *ib;
 	unsigned i;
 	unsigned idx;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx;
 	for (i = 0; i <= (pkt->count + 1); i++, idx++) {
 		DRM_INFO("ib[%d]=0x%08X\n", idx, ib[idx]);
@@ -896,7 +894,7 @@
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -939,7 +937,6 @@
  */
 int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct drm_mode_object *obj;
 	struct drm_crtc *crtc;
 	struct radeon_crtc *radeon_crtc;
@@ -947,8 +944,9 @@
 	int crtc_id;
 	int r;
 	uint32_t header, h_idx, reg;
+	volatile uint32_t *ib;
 
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	ib = p->ib->ptr;
 
 	/* parse the wait until */
 	r = r100_cs_packet_parse(p, &waitreloc, p->idx);
@@ -963,24 +961,24 @@
 		return r;
 	}
 
-	if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+	if (radeon_get_ib_value(p, waitreloc.idx + 1) != RADEON_WAIT_CRTC_VLINE) {
 		DRM_ERROR("vline wait had illegal wait until\n");
 		r = -EINVAL;
 		return r;
 	}
 
 	/* jump over the NOP */
-	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx + waitreloc.count + 2);
 	if (r)
 		return r;
 
 	h_idx = p->idx - 2;
-	p->idx += waitreloc.count;
-	p->idx += p3reloc.count;
+	p->idx += waitreloc.count + 2;
+	p->idx += p3reloc.count + 2;
 
-	header = ib_chunk->kdata[h_idx];
-	crtc_id = ib_chunk->kdata[h_idx + 5];
-	reg = ib_chunk->kdata[h_idx] >> 2;
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 5);
+	reg = header >> 2;
 	mutex_lock(&p->rdev->ddev->mode_config.mutex);
 	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
 	if (!obj) {
@@ -994,16 +992,16 @@
 
 	if (!crtc->enabled) {
 		/* if the CRTC isn't enabled - we need to nop out the wait until */
-		ib_chunk->kdata[h_idx + 2] = PACKET2(0);
-		ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
 	} else if (crtc_id == 1) {
 		switch (reg) {
 		case AVIVO_D1MODE_VLINE_START_END:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
 			break;
 		case RADEON_CRTC_GUI_TRIG_VLINE:
-			header &= R300_CP_PACKET0_REG_MASK;
+			header &= ~R300_CP_PACKET0_REG_MASK;
 			header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
 			break;
 		default:
@@ -1011,8 +1009,8 @@
 			r = -EINVAL;
 			goto out;
 		}
-		ib_chunk->kdata[h_idx] = header;
-		ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+		ib[h_idx] = header;
+		ib[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
 	}
 out:
 	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
@@ -1033,7 +1031,6 @@
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -1044,7 +1041,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -1057,7 +1053,7 @@
 		r100_cs_dump_packet(p, &p3reloc);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -1126,7 +1122,6 @@
 			      struct radeon_cs_packet *pkt,
 			      unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -1134,11 +1129,13 @@
 	int r;
 	int i, face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
 
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -1166,8 +1163,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1178,8 +1175,8 @@
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_TXOFFSET_0:
 	case RADEON_PP_TXOFFSET_1:
@@ -1192,7 +1189,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T0_0:
@@ -1208,8 +1205,8 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[0].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[0].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[0].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T1_0:
@@ -1225,8 +1222,8 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[1].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[1].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[1].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_PP_CUBIC_OFFSET_T2_0:
@@ -1242,12 +1239,12 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[2].cube_info[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[2].cube_info[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[2].cube_info[i].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1263,17 +1260,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -1291,13 +1288,13 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -1321,44 +1318,44 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case RADEON_SE_VTX_FMT:
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx]);
+		track->vtx_size = r100_get_vtx_size(idx_value);
 		break;
 	case RADEON_PP_TEX_SIZE_0:
 	case RADEON_PP_TEX_SIZE_1:
 	case RADEON_PP_TEX_SIZE_2:
 		i = (reg - RADEON_PP_TEX_SIZE_0) / 8;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case RADEON_PP_TEX_PITCH_0:
 	case RADEON_PP_TEX_PITCH_1:
 	case RADEON_PP_TEX_PITCH_2:
 		i = (reg - RADEON_PP_TEX_PITCH_0) / 8;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case RADEON_PP_TXFILTER_0:
 	case RADEON_PP_TXFILTER_1:
 	case RADEON_PP_TXFILTER_2:
 		i = (reg - RADEON_PP_TXFILTER_0) / 24;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & RADEON_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & RADEON_MAX_MIP_LEVEL_MASK)
 						 >> RADEON_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -1366,16 +1363,16 @@
 	case RADEON_PP_TXFORMAT_1:
 	case RADEON_PP_TXFORMAT_2:
 		i = (reg - RADEON_PP_TXFORMAT_0) / 24;
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_NON_POWER2) {
+		if (idx_value & RADEON_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		if (ib_chunk->kdata[idx] & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
+		if (idx_value & RADEON_TXFORMAT_CUBIC_MAP_ENABLE)
 			track->textures[i].tex_coord_type = 2;
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case RADEON_TXFORMAT_I8:
 		case RADEON_TXFORMAT_RGB332:
 		case RADEON_TXFORMAT_Y8:
@@ -1402,13 +1399,13 @@
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case RADEON_PP_CUBIC_FACES_0:
 	case RADEON_PP_CUBIC_FACES_1:
 	case RADEON_PP_CUBIC_FACES_2:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - RADEON_PP_CUBIC_FACES_0) / 4;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
@@ -1427,15 +1424,14 @@
 					 struct radeon_cs_packet *pkt,
 					 struct radeon_object *robj)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	unsigned idx;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 	idx = pkt->idx + 1;
-	if ((ib_chunk->kdata[idx+2] + 1) > radeon_object_size(robj)) {
+	value = radeon_get_ib_value(p, idx + 2);
+	if ((value + 1) > radeon_object_size(robj)) {
 		DRM_ERROR("[drm] Buffer too small for PACKET3 INDX_BUFFER "
 			  "(need %u have %lu) !\n",
-			  ib_chunk->kdata[idx+2] + 1,
+			  value + 1,
 			  radeon_object_size(robj));
 		return -EINVAL;
 	}
@@ -1445,59 +1441,20 @@
 static int r100_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	unsigned idx;
-	unsigned i, c;
 	volatile uint32_t *ib;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch (pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++];
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i += 2, idx += 3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1506,7 +1463,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx+1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1520,27 +1477,27 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = radeon_get_ib_value(p, idx) + ((u32)reloc->lobj.gpu_offset);
 		track->num_arrays = 1;
-		track->vtx_size = r100_get_vtx_size(ib_chunk->kdata[idx+2]);
+		track->vtx_size = r100_get_vtx_size(radeon_get_ib_value(p, idx + 2));
 
 		track->arrays[0].robj = reloc->robj;
 		track->arrays[0].esize = track->vtx_size;
 
-		track->max_indx = ib_chunk->kdata[idx+1];
+		track->max_indx = radeon_get_ib_value(p, idx+1);
 
-		track->vap_vf_cntl = ib_chunk->kdata[idx+3];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx+3);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 	case PACKET3_3D_DRAW_IMMD:
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1548,11 +1505,11 @@
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_IMMD_2:
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
@@ -1560,28 +1517,28 @@
 		break;
 		/* triggers drawing using in-packet vertex data */
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing using indices to vertex buffer */
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
 		break;
 		/* triggers drawing of vertex buffers setup elsewhere */
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r)
 			return r;
diff --git a/drivers/gpu/drm/radeon/r100_track.h b/drivers/gpu/drm/radeon/r100_track.h
index 70a82ed..0daf0d7 100644
--- a/drivers/gpu/drm/radeon/r100_track.h
+++ b/drivers/gpu/drm/radeon/r100_track.h
@@ -84,6 +84,8 @@
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg);
 
+
+
 static inline int r100_reloc_pitch_offset(struct radeon_cs_parser *p,
 					  struct radeon_cs_packet *pkt,
 					  unsigned idx,
@@ -93,9 +95,7 @@
 	u32 tile_flags = 0;
 	u32 tmp;
 	struct radeon_cs_reloc *reloc;
-	struct radeon_cs_chunk *ib_chunk;
-
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
+	u32 value;
 
 	r = r100_cs_packet_next_reloc(p, &reloc);
 	if (r) {
@@ -104,7 +104,8 @@
 		r100_cs_dump_packet(p, pkt);
 		return r;
 	}
-	tmp = ib_chunk->kdata[idx] & 0x003fffff;
+	value = radeon_get_ib_value(p, idx);
+	tmp = value & 0x003fffff;
 	tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
 
 	if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
@@ -119,6 +120,64 @@
 	}
 
 	tmp |= tile_flags;
-	p->ib->ptr[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
+	p->ib->ptr[idx] = (value & 0x3fc00000) | tmp;
 	return 0;
 }
+
+static inline int r100_packet3_load_vbpntr(struct radeon_cs_parser *p,
+					   struct radeon_cs_packet *pkt,
+					   int idx)
+{
+	unsigned c, i;
+	struct radeon_cs_reloc *reloc;
+	struct r100_cs_track *track;
+	int r = 0;
+	volatile uint32_t *ib;
+	u32 idx_value;
+
+	ib = p->ib->ptr;
+	track = (struct r100_cs_track *)p->track;
+	c = radeon_get_ib_value(p, idx++) & 0x1F;
+	track->num_arrays = c;
+	for (i = 0; i < (c - 1); i+=2, idx+=3) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize &= 0x7F;
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+				  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		ib[idx+2] = radeon_get_ib_value(p, idx + 2) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 1].robj = reloc->robj;
+		track->arrays[i + 1].esize = idx_value >> 24;
+		track->arrays[i + 1].esize &= 0x7F;
+	}
+	if (c & 1) {
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for packet3 %d\n",
+					  pkt->opcode);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		idx_value = radeon_get_ib_value(p, idx);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
+		track->arrays[i + 0].robj = reloc->robj;
+		track->arrays[i + 0].esize = idx_value >> 8;
+		track->arrays[i + 0].esize &= 0x7F;
+	}
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index 568c74b..cf7fea5 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -96,7 +96,6 @@
 		       struct radeon_cs_packet *pkt,
 		       unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
@@ -105,11 +104,11 @@
 	int i;
 	int face;
 	u32 tile_flags = 0;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
-
+	idx_value = radeon_get_ib_value(p, idx);
 	switch (reg) {
 	case RADEON_CRTC_GUI_TRIG_VLINE:
 		r = r100_cs_packet_parse_vline(p);
@@ -137,8 +136,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_RB3D_COLOROFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -149,8 +148,8 @@
 			return r;
 		}
 		track->cb[0].robj = reloc->robj;
-		track->cb[0].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[0].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R200_PP_TXOFFSET_0:
 	case R200_PP_TXOFFSET_1:
@@ -166,7 +165,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	case R200_PP_CUBIC_OFFSET_F1_0:
@@ -208,12 +207,12 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		track->textures[i].cube_info[face - 1].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->textures[i].cube_info[face - 1].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].cube_info[face - 1].robj = reloc->robj;
 		break;
 	case RADEON_RE_WIDTH_HEIGHT:
-		track->maxy = ((ib_chunk->kdata[idx] >> 16) & 0x7FF);
+		track->maxy = ((idx_value >> 16) & 0x7FF);
 		break;
 	case RADEON_RB3D_COLORPITCH:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -229,17 +228,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->cb[0].pitch = ib_chunk->kdata[idx] & RADEON_COLORPITCH_MASK;
+		track->cb[0].pitch = idx_value & RADEON_COLORPITCH_MASK;
 		break;
 	case RADEON_RB3D_DEPTHPITCH:
-		track->zb.pitch = ib_chunk->kdata[idx] & RADEON_DEPTHPITCH_MASK;
+		track->zb.pitch = idx_value & RADEON_DEPTHPITCH_MASK;
 		break;
 	case RADEON_RB3D_CNTL:
-		switch ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
+		switch ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f) {
 		case 7:
 		case 8:
 		case 9:
@@ -257,18 +256,18 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
+				  ((idx_value >> RADEON_RB3D_COLOR_FORMAT_SHIFT) & 0x1f));
 			return -EINVAL;
 		}
-		if (ib_chunk->kdata[idx] & RADEON_DEPTHXY_OFFSET_ENABLE) {
+		if (idx_value & RADEON_DEPTHXY_OFFSET_ENABLE) {
 			DRM_ERROR("No support for depth xy offset in kms\n");
 			return -EINVAL;
 		}
 
-		track->z_enabled = !!(ib_chunk->kdata[idx] & RADEON_Z_ENABLE);
+		track->z_enabled = !!(idx_value & RADEON_Z_ENABLE);
 		break;
 	case RADEON_RB3D_ZSTENCILCNTL:
-		switch (ib_chunk->kdata[idx] & 0xf) {
+		switch (idx_value & 0xf) {
 		case 0:
 			track->zb.cpp = 2;
 			break;
@@ -292,27 +291,27 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case RADEON_PP_CNTL:
 		{
-			uint32_t temp = ib_chunk->kdata[idx] >> 4;
+			uint32_t temp = idx_value >> 4;
 			for (i = 0; i < track->num_texture; i++)
 				track->textures[i].enabled = !!(temp & (1 << i));
 		}
 		break;
 	case RADEON_SE_VF_CNTL:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x210c:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case R200_SE_VTX_FMT_0:
-		track->vtx_size = r200_get_vtx_size_0(ib_chunk->kdata[idx]);
+		track->vtx_size = r200_get_vtx_size_0(idx_value);
 		break;
 	case R200_SE_VTX_FMT_1:
-		track->vtx_size += r200_get_vtx_size_1(ib_chunk->kdata[idx]);
+		track->vtx_size += r200_get_vtx_size_1(idx_value);
 		break;
 	case R200_PP_TXSIZE_0:
 	case R200_PP_TXSIZE_1:
@@ -321,8 +320,8 @@
 	case R200_PP_TXSIZE_4:
 	case R200_PP_TXSIZE_5:
 		i = (reg - R200_PP_TXSIZE_0) / 32;
-		track->textures[i].width = (ib_chunk->kdata[idx] & RADEON_TEX_USIZE_MASK) + 1;
-		track->textures[i].height = ((ib_chunk->kdata[idx] & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
+		track->textures[i].width = (idx_value & RADEON_TEX_USIZE_MASK) + 1;
+		track->textures[i].height = ((idx_value & RADEON_TEX_VSIZE_MASK) >> RADEON_TEX_VSIZE_SHIFT) + 1;
 		break;
 	case R200_PP_TXPITCH_0:
 	case R200_PP_TXPITCH_1:
@@ -331,7 +330,7 @@
 	case R200_PP_TXPITCH_4:
 	case R200_PP_TXPITCH_5:
 		i = (reg - R200_PP_TXPITCH_0) / 32;
-		track->textures[i].pitch = ib_chunk->kdata[idx] + 32;
+		track->textures[i].pitch = idx_value + 32;
 		break;
 	case R200_PP_TXFILTER_0:
 	case R200_PP_TXFILTER_1:
@@ -340,12 +339,12 @@
 	case R200_PP_TXFILTER_4:
 	case R200_PP_TXFILTER_5:
 		i = (reg - R200_PP_TXFILTER_0) / 32;
-		track->textures[i].num_levels = ((ib_chunk->kdata[idx] & R200_MAX_MIP_LEVEL_MASK)
+		track->textures[i].num_levels = ((idx_value & R200_MAX_MIP_LEVEL_MASK)
 						 >> R200_MAX_MIP_LEVEL_SHIFT);
-		tmp = (ib_chunk->kdata[idx] >> 23) & 0x7;
+		tmp = (idx_value >> 23) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_w = false;
-		tmp = (ib_chunk->kdata[idx] >> 27) & 0x7;
+		tmp = (idx_value >> 27) & 0x7;
 		if (tmp == 2 || tmp == 6)
 			track->textures[i].roundup_h = false;
 		break;
@@ -364,8 +363,8 @@
 	case R200_PP_TXFORMAT_X_4:
 	case R200_PP_TXFORMAT_X_5:
 		i = (reg - R200_PP_TXFORMAT_X_0) / 32;
-		track->textures[i].txdepth = ib_chunk->kdata[idx] & 0x7;
-		tmp = (ib_chunk->kdata[idx] >> 16) & 0x3;
+		track->textures[i].txdepth = idx_value & 0x7;
+		tmp = (idx_value >> 16) & 0x3;
 		/* 2D, 3D, CUBE */
 		switch (tmp) {
 		case 0:
@@ -389,14 +388,14 @@
 	case R200_PP_TXFORMAT_4:
 	case R200_PP_TXFORMAT_5:
 		i = (reg - R200_PP_TXFORMAT_0) / 32;
-		if (ib_chunk->kdata[idx] & R200_TXFORMAT_NON_POWER2) {
+		if (idx_value & R200_TXFORMAT_NON_POWER2) {
 			track->textures[i].use_pitch = 1;
 		} else {
 			track->textures[i].use_pitch = 0;
-			track->textures[i].width = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
-			track->textures[i].height = 1 << ((ib_chunk->kdata[idx] >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
+			track->textures[i].width = 1 << ((idx_value >> RADEON_TXFORMAT_WIDTH_SHIFT) & RADEON_TXFORMAT_WIDTH_MASK);
+			track->textures[i].height = 1 << ((idx_value >> RADEON_TXFORMAT_HEIGHT_SHIFT) & RADEON_TXFORMAT_HEIGHT_MASK);
 		}
-		switch ((ib_chunk->kdata[idx] & RADEON_TXFORMAT_FORMAT_MASK)) {
+		switch ((idx_value & RADEON_TXFORMAT_FORMAT_MASK)) {
 		case R200_TXFORMAT_I8:
 		case R200_TXFORMAT_RGB332:
 		case R200_TXFORMAT_Y8:
@@ -424,8 +423,8 @@
 			track->textures[i].cpp = 4;
 			break;
 		}
-		track->textures[i].cube_info[4].width = 1 << ((ib_chunk->kdata[idx] >> 16) & 0xf);
-		track->textures[i].cube_info[4].height = 1 << ((ib_chunk->kdata[idx] >> 20) & 0xf);
+		track->textures[i].cube_info[4].width = 1 << ((idx_value >> 16) & 0xf);
+		track->textures[i].cube_info[4].height = 1 << ((idx_value >> 20) & 0xf);
 		break;
 	case R200_PP_CUBIC_FACES_0:
 	case R200_PP_CUBIC_FACES_1:
@@ -433,7 +432,7 @@
 	case R200_PP_CUBIC_FACES_3:
 	case R200_PP_CUBIC_FACES_4:
 	case R200_PP_CUBIC_FACES_5:
-		tmp = ib_chunk->kdata[idx];
+		tmp = idx_value;
 		i = (reg - R200_PP_CUBIC_FACES_0) / 32;
 		for (face = 0; face < 4; face++) {
 			track->textures[i].cube_info[face].width = 1 << ((tmp >> (face * 8)) & 0xf);
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index bb151ec..1ebea8c 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -697,17 +697,18 @@
 		struct radeon_cs_packet *pkt,
 		unsigned idx, unsigned reg)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	uint32_t tmp, tile_flags = 0;
 	unsigned i;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r100_cs_track *)p->track;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch(reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
 	case RADEON_CRTC_GUI_TRIG_VLINE:
@@ -738,8 +739,8 @@
 			return r;
 		}
 		track->cb[i].robj = reloc->robj;
-		track->cb[i].offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->cb[i].offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_ZB_DEPTHOFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -750,8 +751,8 @@
 			return r;
 		}
 		track->zb.robj = reloc->robj;
-		track->zb.offset = ib_chunk->kdata[idx];
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		track->zb.offset = idx_value;
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case R300_TX_OFFSET_0:
 	case R300_TX_OFFSET_0+4:
@@ -777,32 +778,32 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		track->textures[i].robj = reloc->robj;
 		break;
 	/* Tracked registers */
 	case 0x2084:
 		/* VAP_VF_CNTL */
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = idx_value;
 		break;
 	case 0x20B4:
 		/* VAP_VTX_SIZE */
-		track->vtx_size = ib_chunk->kdata[idx] & 0x7F;
+		track->vtx_size = idx_value & 0x7F;
 		break;
 	case 0x2134:
 		/* VAP_VF_MAX_VTX_INDX */
-		track->max_indx = ib_chunk->kdata[idx] & 0x00FFFFFFUL;
+		track->max_indx = idx_value & 0x00FFFFFFUL;
 		break;
 	case 0x43E4:
 		/* SC_SCISSOR1 */
-		track->maxy = ((ib_chunk->kdata[idx] >> 13) & 0x1FFF) + 1;
+		track->maxy = ((idx_value >> 13) & 0x1FFF) + 1;
 		if (p->rdev->family < CHIP_RV515) {
 			track->maxy -= 1440;
 		}
 		break;
 	case 0x4E00:
 		/* RB3D_CCTL */
-		track->num_cb = ((ib_chunk->kdata[idx] >> 5) & 0x3) + 1;
+		track->num_cb = ((idx_value >> 5) & 0x3) + 1;
 		break;
 	case 0x4E38:
 	case 0x4E3C:
@@ -825,13 +826,13 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
 		i = (reg - 0x4E38) >> 2;
-		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
-		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
+		track->cb[i].pitch = idx_value & 0x3FFE;
+		switch (((idx_value >> 21) & 0xF)) {
 		case 9:
 		case 11:
 		case 12:
@@ -854,13 +855,13 @@
 			break;
 		default:
 			DRM_ERROR("Invalid color buffer format (%d) !\n",
-				  ((ib_chunk->kdata[idx] >> 21) & 0xF));
+				  ((idx_value >> 21) & 0xF));
 			return -EINVAL;
 		}
 		break;
 	case 0x4F00:
 		/* ZB_CNTL */
-		if (ib_chunk->kdata[idx] & 2) {
+		if (idx_value & 2) {
 			track->z_enabled = true;
 		} else {
 			track->z_enabled = false;
@@ -868,7 +869,7 @@
 		break;
 	case 0x4F10:
 		/* ZB_FORMAT */
-		switch ((ib_chunk->kdata[idx] & 0xF)) {
+		switch ((idx_value & 0xF)) {
 		case 0:
 		case 1:
 			track->zb.cpp = 2;
@@ -878,7 +879,7 @@
 			break;
 		default:
 			DRM_ERROR("Invalid z buffer format (%d) !\n",
-				  (ib_chunk->kdata[idx] & 0xF));
+				  (idx_value & 0xF));
 			return -EINVAL;
 		}
 		break;
@@ -897,17 +898,17 @@
 		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
 			tile_flags |= R300_DEPTHMICROTILE_TILED;;
 
-		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp = idx_value & ~(0x7 << 16);
 		tmp |= tile_flags;
 		ib[idx] = tmp;
 
-		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
+		track->zb.pitch = idx_value & 0x3FFC;
 		break;
 	case 0x4104:
 		for (i = 0; i < 16; i++) {
 			bool enabled;
 
-			enabled = !!(ib_chunk->kdata[idx] & (1 << i));
+			enabled = !!(idx_value & (1 << i));
 			track->textures[i].enabled = enabled;
 		}
 		break;
@@ -929,9 +930,9 @@
 	case 0x44FC:
 		/* TX_FORMAT1_[0-15] */
 		i = (reg - 0x44C0) >> 2;
-		tmp = (ib_chunk->kdata[idx] >> 25) & 0x3;
+		tmp = (idx_value >> 25) & 0x3;
 		track->textures[i].tex_coord_type = tmp;
-		switch ((ib_chunk->kdata[idx] & 0x1F)) {
+		switch ((idx_value & 0x1F)) {
 		case R300_TX_FORMAT_X8:
 		case R300_TX_FORMAT_Y4X4:
 		case R300_TX_FORMAT_Z3Y3X2:
@@ -971,7 +972,7 @@
 			break;
 		default:
 			DRM_ERROR("Invalid texture format %u\n",
-				  (ib_chunk->kdata[idx] & 0x1F));
+				  (idx_value & 0x1F));
 			return -EINVAL;
 			break;
 		}
@@ -994,11 +995,11 @@
 	case 0x443C:
 		/* TX_FILTER0_[0-15] */
 		i = (reg - 0x4400) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7;
+		tmp = idx_value & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_w = false;
 		}
-		tmp = (ib_chunk->kdata[idx] >> 3) & 0x7;
+		tmp = (idx_value >> 3) & 0x7;
 		if (tmp == 2 || tmp == 4 || tmp == 6) {
 			track->textures[i].roundup_h = false;
 		}
@@ -1021,12 +1022,12 @@
 	case 0x453C:
 		/* TX_FORMAT2_[0-15] */
 		i = (reg - 0x4500) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x3FFF;
+		tmp = idx_value & 0x3FFF;
 		track->textures[i].pitch = tmp + 1;
 		if (p->rdev->family >= CHIP_RV515) {
-			tmp = ((ib_chunk->kdata[idx] >> 15) & 1) << 11;
+			tmp = ((idx_value >> 15) & 1) << 11;
 			track->textures[i].width_11 = tmp;
-			tmp = ((ib_chunk->kdata[idx] >> 16) & 1) << 11;
+			tmp = ((idx_value >> 16) & 1) << 11;
 			track->textures[i].height_11 = tmp;
 		}
 		break;
@@ -1048,15 +1049,15 @@
 	case 0x44BC:
 		/* TX_FORMAT0_[0-15] */
 		i = (reg - 0x4480) >> 2;
-		tmp = ib_chunk->kdata[idx] & 0x7FF;
+		tmp = idx_value & 0x7FF;
 		track->textures[i].width = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 11) & 0x7FF;
+		tmp = (idx_value >> 11) & 0x7FF;
 		track->textures[i].height = tmp + 1;
-		tmp = (ib_chunk->kdata[idx] >> 26) & 0xF;
+		tmp = (idx_value >> 26) & 0xF;
 		track->textures[i].num_levels = tmp;
-		tmp = ib_chunk->kdata[idx] & (1 << 31);
+		tmp = idx_value & (1 << 31);
 		track->textures[i].use_pitch = !!tmp;
-		tmp = (ib_chunk->kdata[idx] >> 22) & 0xF;
+		tmp = (idx_value >> 22) & 0xF;
 		track->textures[i].txdepth = tmp;
 		break;
 	case R300_ZB_ZPASS_ADDR:
@@ -1067,7 +1068,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx] = idx_value + ((u32)reloc->lobj.gpu_offset);
 		break;
 	case 0x4be8:
 		/* valid register only on RV530 */
@@ -1085,60 +1086,20 @@
 static int r300_packet3_check(struct radeon_cs_parser *p,
 			      struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
-
 	struct radeon_cs_reloc *reloc;
 	struct r100_cs_track *track;
 	volatile uint32_t *ib;
 	unsigned idx;
-	unsigned i, c;
 	int r;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
 	track = (struct r100_cs_track *)p->track;
 	switch(pkt->opcode) {
 	case PACKET3_3D_LOAD_VBPNTR:
-		c = ib_chunk->kdata[idx++] & 0x1F;
-		track->num_arrays = c;
-		for (i = 0; i < (c - 1); i+=2, idx+=3) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+2] = ib_chunk->kdata[idx+2] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 1].robj = reloc->robj;
-			track->arrays[i + 1].esize = ib_chunk->kdata[idx] >> 24;
-			track->arrays[i + 1].esize &= 0x7F;
-		}
-		if (c & 1) {
-			r = r100_cs_packet_next_reloc(p, &reloc);
-			if (r) {
-				DRM_ERROR("No reloc for packet3 %d\n",
-					  pkt->opcode);
-				r100_cs_dump_packet(p, pkt);
-				return r;
-			}
-			ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
-			track->arrays[i + 0].robj = reloc->robj;
-			track->arrays[i + 0].esize = ib_chunk->kdata[idx] >> 8;
-			track->arrays[i + 0].esize &= 0x7F;
-		}
+		r = r100_packet3_load_vbpntr(p, pkt, idx);
+		if (r)
+			return r;
 		break;
 	case PACKET3_INDX_BUFFER:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1147,7 +1108,7 @@
 			r100_cs_dump_packet(p, pkt);
 			return r;
 		}
-		ib[idx+1] = ib_chunk->kdata[idx+1] + ((u32)reloc->lobj.gpu_offset);
+		ib[idx+1] = radeon_get_ib_value(p, idx + 1) + ((u32)reloc->lobj.gpu_offset);
 		r = r100_cs_track_check_pkt3_indx_buffer(p, pkt, reloc->robj);
 		if (r) {
 			return r;
@@ -1158,11 +1119,11 @@
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx+1] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx + 1) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx+1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		track->immd_dwords = pkt->count - 1;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1173,11 +1134,11 @@
 		/* Number of dwords is vtx_size * (num_vertices - 1)
 		 * PRIM_WALK must be equal to 3 vertex data in embedded
 		 * in cmd stream */
-		if (((ib_chunk->kdata[idx] >> 4) & 0x3) != 3) {
+		if (((radeon_get_ib_value(p, idx) >> 4) & 0x3) != 3) {
 			DRM_ERROR("PRIM_WALK must be 3 for IMMD draw\n");
 			return -EINVAL;
 		}
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		track->immd_dwords = pkt->count;
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
@@ -1185,28 +1146,28 @@
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_VBUF_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX:
-		track->vap_vf_cntl = ib_chunk->kdata[idx + 1];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx + 1);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
 		}
 		break;
 	case PACKET3_3D_DRAW_INDX_2:
-		track->vap_vf_cntl = ib_chunk->kdata[idx];
+		track->vap_vf_cntl = radeon_get_ib_value(p, idx);
 		r = r100_cs_track_check(p->rdev, track);
 		if (r) {
 			return r;
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index e1d5e03..868add6 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,8 @@
 #define AVIVO_D1MODE_VBLANK_STATUS              0x6534
 #       define AVIVO_VBLANK_ACK                 (1 << 4)
 #define AVIVO_D1MODE_VLINE_START_END            0x6538
+#define AVIVO_D1MODE_VLINE_STATUS               0x653c
+#       define AVIVO_D1MODE_VLINE_STAT          (1 << 12)
 #define AVIVO_DxMODE_INT_MASK                   0x6540
 #       define AVIVO_D1MODE_INT_MASK            (1 << 0)
 #       define AVIVO_D2MODE_INT_MASK            (1 << 8)
@@ -502,6 +504,7 @@
 
 #define AVIVO_D2MODE_VBLANK_STATUS              0x6d34
 #define AVIVO_D2MODE_VLINE_START_END            0x6d38
+#define AVIVO_D2MODE_VLINE_STATUS               0x6d3c
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index d4b0b9d..0bf13fc 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -26,108 +26,13 @@
  *          Jerome Glisse
  */
 #include "drmP.h"
-#include "radeon_reg.h"
 #include "radeon.h"
+#include "atom.h"
+#include "r520d.h"
 
-/* r520,rv530,rv560,rv570,r580 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
-int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
-int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
+/* This files gather functions specifics to: r520,rv530,rv560,rv570,r580 */
 
-/* This files gather functions specifics to:
- * r520,rv530,rv560,rv570,r580
- *
- * Some of these functions might be used by newer ASICs.
- */
-void r520_gpu_init(struct radeon_device *rdev);
-int r520_mc_wait_for_idle(struct radeon_device *rdev);
-
-
-/*
- * MC
- */
-int r520_mc_init(struct radeon_device *rdev)
-{
-	uint32_t tmp;
-	int r;
-
-	if (r100_debugfs_rbbm_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
-	}
-	if (rv515_debugfs_pipes_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-	if (rv515_debugfs_ga_info_init(rdev)) {
-		DRM_ERROR("Failed to register debugfs file for pipes !\n");
-	}
-
-	r520_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (r520_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(R520_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(R520_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(R520_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(R520_MC_AGP_LOCATION, tmp);
-		WREG32_MC(R520_MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(R520_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(R520_MC_AGP_BASE, 0);
-		WREG32_MC(R520_MC_AGP_BASE_2, 0);
-	}
-	return 0;
-}
-
-void r520_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
-void r520_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
-int r520_mc_wait_for_idle(struct radeon_device *rdev)
+static int r520_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
 	uint32_t tmp;
@@ -143,12 +48,12 @@
 	return -1;
 }
 
-void r520_gpu_init(struct radeon_device *rdev)
+static void r520_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
 
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/*
 	 * DST_PIPE_CONFIG		0x170C
 	 * GB_TILE_CONFIG		0x4018
@@ -186,10 +91,6 @@
 	}
 }
 
-
-/*
- * VRAM info
- */
 static void r520_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -233,7 +134,168 @@
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-void r520_bandwidth_update(struct radeon_device *rdev)
+void r520_mc_program(struct radeon_device *rdev)
 {
-	rv515_bandwidth_avivo_update(rdev);
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (r520_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000004_MC_FB_LOCATION,
+			S_000004_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000004_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000005_MC_AGP_LOCATION,
+			S_000005_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000005_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000006_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000007_AGP_BASE_2,
+			S_000007_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000005_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000006_AGP_BASE, 0);
+		WREG32_MC(R_000007_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+static int r520_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	r520_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	r520_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int r520_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return r520_startup(rdev);
+}
+
+int r520_init(struct radeon_device *rdev)
+{
+	int r;
+
+	rdev->new_init_path = true;
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	r520_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = r520_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
+	return 0;
 }
diff --git a/drivers/gpu/drm/radeon/r520d.h b/drivers/gpu/drm/radeon/r520d.h
new file mode 100644
index 0000000..61af61f
--- /dev/null
+++ b/drivers/gpu/drm/radeon/r520d.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __R520D_H__
+#define __R520D_H__
+
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+
+
+#define R_000004_MC_FB_LOCATION                      0x000004
+#define   S_000004_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000004_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000004_MC_FB_START                         0xFFFF0000
+#define   S_000004_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000004_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000004_MC_FB_TOP                           0x0000FFFF
+#define R_000005_MC_AGP_LOCATION                     0x000005
+#define   S_000005_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000005_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000005_MC_AGP_START                        0xFFFF0000
+#define   S_000005_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000005_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000005_MC_AGP_TOP                          0x0000FFFF
+#define R_000006_AGP_BASE                            0x000006
+#define   S_000006_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000006_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000006_AGP_BASE_ADDR                       0x00000000
+#define R_000007_AGP_BASE_2                          0x000007
+#define   S_000007_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000007_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000007_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+#endif
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index eab31c1..2e4e60e 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -33,8 +33,8 @@
 #include "radeon.h"
 #include "radeon_mode.h"
 #include "r600d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define PFP_UCODE_SIZE 576
 #define PM4_UCODE_SIZE 1792
@@ -342,7 +342,7 @@
 
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 int r600_mc_init(struct radeon_device *rdev)
@@ -380,6 +380,13 @@
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c
index 33b89cd..d28970d 100644
--- a/drivers/gpu/drm/radeon/r600_cs.c
+++ b/drivers/gpu/drm/radeon/r600_cs.c
@@ -28,7 +28,6 @@
 #include "drmP.h"
 #include "radeon.h"
 #include "r600d.h"
-#include "avivod.h"
 
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc);
@@ -57,7 +56,7 @@
 			  idx, ib_chunk->length_dw);
 		return -EINVAL;
 	}
-	header = ib_chunk->kdata[idx];
+	header = radeon_get_ib_value(p, idx);
 	pkt->idx = idx;
 	pkt->type = CP_PACKET_GET_TYPE(header);
 	pkt->count = CP_PACKET_GET_COUNT(header);
@@ -98,7 +97,6 @@
 static int r600_cs_packet_next_reloc_mm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -109,7 +107,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -121,7 +118,7 @@
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -146,7 +143,6 @@
 static int r600_cs_packet_next_reloc_nomm(struct radeon_cs_parser *p,
 					struct radeon_cs_reloc **cs_reloc)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_chunk *relocs_chunk;
 	struct radeon_cs_packet p3reloc;
 	unsigned idx;
@@ -157,7 +153,6 @@
 		return -EINVAL;
 	}
 	*cs_reloc = NULL;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	relocs_chunk = &p->chunks[p->chunk_relocs_idx];
 	r = r600_cs_packet_parse(p, &p3reloc, p->idx);
 	if (r) {
@@ -169,7 +164,7 @@
 			  p3reloc.idx);
 		return -EINVAL;
 	}
-	idx = ib_chunk->kdata[p3reloc.idx + 1];
+	idx = radeon_get_ib_value(p, p3reloc.idx + 1);
 	if (idx >= relocs_chunk->length_dw) {
 		DRM_ERROR("Relocs at %d after relocations chunk end %d !\n",
 			  idx, relocs_chunk->length_dw);
@@ -181,13 +176,136 @@
 	return 0;
 }
 
+/**
+ * r600_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET3 - WAIT_REG_MEM poll vline status reg
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT_REG_MEM packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+static int r600_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, wait_reg_mem;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg, wait_reg_mem_info;
+	volatile uint32_t *ib;
+
+	ib = p->ib->ptr;
+
+	/* parse the WAIT_REG_MEM */
+	r = r600_cs_packet_parse(p, &wait_reg_mem, p->idx);
+	if (r)
+		return r;
+
+	/* check its a WAIT_REG_MEM */
+	if (wait_reg_mem.type != PACKET_TYPE3 ||
+	    wait_reg_mem.opcode != PACKET3_WAIT_REG_MEM) {
+		DRM_ERROR("vline wait missing WAIT_REG_MEM segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	wait_reg_mem_info = radeon_get_ib_value(p, wait_reg_mem.idx + 1);
+	/* bit 4 is reg (0) or mem (1) */
+	if (wait_reg_mem_info & 0x10) {
+		DRM_ERROR("vline WAIT_REG_MEM waiting on MEM rather than REG\n");
+		r = -EINVAL;
+		return r;
+	}
+	/* waiting for value to be equal */
+	if ((wait_reg_mem_info & 0x7) != 0x3) {
+		DRM_ERROR("vline WAIT_REG_MEM function not equal\n");
+		r = -EINVAL;
+		return r;
+	}
+	if ((radeon_get_ib_value(p, wait_reg_mem.idx + 2) << 2) != AVIVO_D1MODE_VLINE_STATUS) {
+		DRM_ERROR("vline WAIT_REG_MEM bad reg\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (radeon_get_ib_value(p, wait_reg_mem.idx + 5) != AVIVO_D1MODE_VLINE_STAT) {
+		DRM_ERROR("vline WAIT_REG_MEM bad bit mask\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = r600_cs_packet_parse(p, &p3reloc, p->idx + wait_reg_mem.count + 2);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += wait_reg_mem.count + 2;
+	p->idx += p3reloc.count + 2;
+
+	header = radeon_get_ib_value(p, h_idx);
+	crtc_id = radeon_get_ib_value(p, h_idx + 2 + 7 + 1);
+	reg = header >> 2;
+	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the WAIT_REG_MEM */
+		ib[h_idx + 2] = PACKET2(0);
+		ib[h_idx + 3] = PACKET2(0);
+		ib[h_idx + 4] = PACKET2(0);
+		ib[h_idx + 5] = PACKET2(0);
+		ib[h_idx + 6] = PACKET2(0);
+		ib[h_idx + 7] = PACKET2(0);
+		ib[h_idx + 8] = PACKET2(0);
+	} else if (crtc_id == 1) {
+		switch (reg) {
+		case AVIVO_D1MODE_VLINE_START_END:
+			header &= ~R600_CP_PACKET0_REG_MASK;
+			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+		ib[h_idx] = header;
+		ib[h_idx + 4] = AVIVO_D2MODE_VLINE_STATUS >> 2;
+	}
+out:
+	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+	return r;
+}
+
 static int r600_packet0_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt,
 				unsigned idx, unsigned reg)
 {
+	int r;
+
 	switch (reg) {
 	case AVIVO_D1MODE_VLINE_START_END:
-	case AVIVO_D2MODE_VLINE_START_END:
+		r = r600_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			return r;
+		}
 		break;
 	default:
 		printk(KERN_ERR "Forbidden register 0x%04X in cs at %d\n",
@@ -218,17 +336,18 @@
 static int r600_packet3_check(struct radeon_cs_parser *p,
 				struct radeon_cs_packet *pkt)
 {
-	struct radeon_cs_chunk *ib_chunk;
 	struct radeon_cs_reloc *reloc;
 	volatile u32 *ib;
 	unsigned idx;
 	unsigned i;
 	unsigned start_reg, end_reg, reg;
 	int r;
+	u32 idx_value;
 
 	ib = p->ib->ptr;
-	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	idx = pkt->idx + 1;
+	idx_value = radeon_get_ib_value(p, idx);
+
 	switch (pkt->opcode) {
 	case PACKET3_START_3D_CMDBUF:
 		if (p->family >= CHIP_RV770 || pkt->count) {
@@ -259,8 +378,8 @@
 			DRM_ERROR("bad DRAW_INDEX\n");
 			return -EINVAL;
 		}
-		ib[idx+0] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+1] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+0] = idx_value + (u32)(reloc->lobj.gpu_offset & 0xffffffff);
+		ib[idx+1] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_DRAW_INDEX_AUTO:
 		if (pkt->count != 1) {
@@ -281,14 +400,14 @@
 			return -EINVAL;
 		}
 		/* bit 4 is reg (0) or mem (1) */
-		if (ib_chunk->kdata[idx+0] & 0x10) {
+		if (idx_value & 0x10) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad WAIT_REG_MEM\n");
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] = upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_SURFACE_SYNC:
@@ -297,8 +416,8 @@
 			return -EINVAL;
 		}
 		/* 0xffffffff/0x0 is flush all cache flag */
-		if (ib_chunk->kdata[idx+1] != 0xffffffff ||
-		    ib_chunk->kdata[idx+2] != 0) {
+		if (radeon_get_ib_value(p, idx + 1) != 0xffffffff ||
+		    radeon_get_ib_value(p, idx + 2) != 0) {
 			r = r600_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("bad SURFACE_SYNC\n");
@@ -319,7 +438,7 @@
 				return -EINVAL;
 			}
 			ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-			ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+			ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		}
 		break;
 	case PACKET3_EVENT_WRITE_EOP:
@@ -333,10 +452,10 @@
 			return -EINVAL;
 		}
 		ib[idx+1] += (u32)(reloc->lobj.gpu_offset & 0xffffffff);
-		ib[idx+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+		ib[idx+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 		break;
 	case PACKET3_SET_CONFIG_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONFIG_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONFIG_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONFIG_REG_END) ||
@@ -356,7 +475,7 @@
 		}
 		break;
 	case PACKET3_SET_CONTEXT_REG:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CONTEXT_REG_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CONTEXT_REG_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CONTEXT_REG_END) ||
@@ -421,7 +540,7 @@
 			DRM_ERROR("bad SET_RESOURCE\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_RESOURCE_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_RESOURCE_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_RESOURCE_OFFSET) ||
 		    (start_reg >= PACKET3_SET_RESOURCE_END) ||
@@ -430,7 +549,7 @@
 			return -EINVAL;
 		}
 		for (i = 0; i < (pkt->count / 7); i++) {
-			switch (G__SQ_VTX_CONSTANT_TYPE(ib[idx+(i*7)+6+1])) {
+			switch (G__SQ_VTX_CONSTANT_TYPE(radeon_get_ib_value(p, idx+(i*7)+6+1))) {
 			case SQ_TEX_VTX_VALID_TEXTURE:
 				/* tex base */
 				r = r600_cs_packet_next_reloc(p, &reloc);
@@ -455,7 +574,7 @@
 					return -EINVAL;
 				}
 				ib[idx+1+(i*7)+0] += (u32)((reloc->lobj.gpu_offset) & 0xffffffff);
-				ib[idx+1+(i*7)+2] |= upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
+				ib[idx+1+(i*7)+2] += upper_32_bits(reloc->lobj.gpu_offset) & 0xff;
 				break;
 			case SQ_TEX_VTX_INVALID_TEXTURE:
 			case SQ_TEX_VTX_INVALID_BUFFER:
@@ -466,7 +585,7 @@
 		}
 		break;
 	case PACKET3_SET_ALU_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_ALU_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_ALU_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_ALU_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_ALU_CONST_END) ||
@@ -476,7 +595,7 @@
 		}
 		break;
 	case PACKET3_SET_BOOL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_BOOL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_BOOL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_BOOL_CONST_END) ||
@@ -486,7 +605,7 @@
 		}
 		break;
 	case PACKET3_SET_LOOP_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_LOOP_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_LOOP_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_LOOP_CONST_END) ||
@@ -496,7 +615,7 @@
 		}
 		break;
 	case PACKET3_SET_CTL_CONST:
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_CTL_CONST_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_CTL_CONST_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_CTL_CONST_OFFSET) ||
 		    (start_reg >= PACKET3_SET_CTL_CONST_END) ||
@@ -510,7 +629,7 @@
 			DRM_ERROR("bad SET_SAMPLER\n");
 			return -EINVAL;
 		}
-		start_reg = (ib[idx+0] << 2) + PACKET3_SET_SAMPLER_OFFSET;
+		start_reg = (idx_value << 2) + PACKET3_SET_SAMPLER_OFFSET;
 		end_reg = 4 * pkt->count + start_reg - 4;
 		if ((start_reg < PACKET3_SET_SAMPLER_OFFSET) ||
 		    (start_reg >= PACKET3_SET_SAMPLER_END) ||
@@ -602,6 +721,8 @@
 	kfree(parser->relocs);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -639,7 +760,6 @@
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	*l = parser.ib->length_dw;
 	r = r600_cs_parse(&parser);
 	if (r) {
@@ -647,6 +767,12 @@
 		r600_cs_parser_fini(&parser, r);
 		return r;
 	}
+	r = radeon_cs_finish_pages(&parser);
+	if (r) {
+		DRM_ERROR("Invalid command stream !\n");
+		r600_cs_parser_fini(&parser, r);
+		return r;
+	}
 	r600_cs_parser_fini(&parser, r);
 	return r;
 }
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 6311b13..950b346 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -44,6 +44,24 @@
  *	- TESTING, TESTING, TESTING
  */
 
+/* Initialization path:
+ *  We expect that acceleration initialization might fail for various
+ *  reasons even thought we work hard to make it works on most
+ *  configurations. In order to still have a working userspace in such
+ *  situation the init path must succeed up to the memory controller
+ *  initialization point. Failure before this point are considered as
+ *  fatal error. Here is the init callchain :
+ *      radeon_device_init  perform common structure, mutex initialization
+ *      asic_init           setup the GPU memory layout and perform all
+ *                          one time initialization (failure in this
+ *                          function are considered fatal)
+ *      asic_startup        setup the GPU acceleration, in order to
+ *                          follow guideline the first thing this
+ *                          function should do is setting the GPU
+ *                          memory controller (only MC setup failure
+ *                          are considered as fatal)
+ */
+
 #include <asm/atomic.h>
 #include <linux/wait.h>
 #include <linux/list.h>
@@ -342,7 +360,7 @@
 	unsigned long		idx;
 	uint64_t		gpu_addr;
 	struct radeon_fence	*fence;
-	volatile uint32_t	*ptr;
+	uint32_t	*ptr;
 	uint32_t		length_dw;
 };
 
@@ -415,7 +433,12 @@
 struct radeon_cs_chunk {
 	uint32_t		chunk_id;
 	uint32_t		length_dw;
+	int kpage_idx[2];
+	uint32_t                *kpage[2];
 	uint32_t		*kdata;
+	void __user *user_ptr;
+	int last_copied_page;
+	int last_page_index;
 };
 
 struct radeon_cs_parser {
@@ -438,8 +461,38 @@
 	struct radeon_ib	*ib;
 	void			*track;
 	unsigned		family;
+	int parser_error;
 };
 
+extern int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx);
+extern int radeon_cs_finish_pages(struct radeon_cs_parser *p);
+
+
+static inline u32 radeon_get_ib_value(struct radeon_cs_parser *p, int idx)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	u32 pg_idx, pg_offset;
+	u32 idx_value = 0;
+	int new_page;
+
+	pg_idx = (idx * 4) / PAGE_SIZE;
+	pg_offset = (idx * 4) % PAGE_SIZE;
+
+	if (ibc->kpage_idx[0] == pg_idx)
+		return ibc->kpage[0][pg_offset/4];
+	if (ibc->kpage_idx[1] == pg_idx)
+		return ibc->kpage[1][pg_offset/4];
+
+	new_page = radeon_cs_update_pages(p, pg_idx);
+	if (new_page < 0) {
+		p->parser_error = new_page;
+		return 0;
+	}
+
+	idx_value = ibc->kpage[new_page][pg_offset/4];
+	return idx_value;
+}
+
 struct radeon_cs_packet {
 	unsigned	idx;
 	unsigned	type;
@@ -943,6 +996,7 @@
 extern void radeon_scratch_init(struct radeon_device *rdev);
 extern void radeon_surface_init(struct radeon_device *rdev);
 extern int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data);
+extern void radeon_atom_set_clock_gating(struct radeon_device *rdev, int enable);
 
 /* r100,rv100,rs100,rv200,rs200,r200,rv250,rs300,rv280 */
 struct r100_mc_save {
@@ -974,6 +1028,9 @@
 extern void r100_wb_disable(struct radeon_device *rdev);
 extern void r100_wb_fini(struct radeon_device *rdev);
 extern int r100_wb_init(struct radeon_device *rdev);
+extern void r100_hdp_reset(struct radeon_device *rdev);
+extern int r100_rb2d_reset(struct radeon_device *rdev);
+extern int r100_cp_reset(struct radeon_device *rdev);
 
 /* r300,r350,rv350,rv370,rv380 */
 extern void r300_set_reg_safe(struct radeon_device *rdev);
@@ -985,12 +1042,29 @@
 extern void rv370_pcie_gart_disable(struct radeon_device *rdev);
 
 /* r420,r423,rv410 */
+extern int r420_mc_init(struct radeon_device *rdev);
 extern u32 r420_mc_rreg(struct radeon_device *rdev, u32 reg);
 extern void r420_mc_wreg(struct radeon_device *rdev, u32 reg, u32 v);
 extern int r420_debugfs_pipes_info_init(struct radeon_device *rdev);
+extern void r420_pipes_init(struct radeon_device *rdev);
 
 /* rv515 */
+struct rv515_mc_save {
+	u32 d1vga_control;
+	u32 d2vga_control;
+	u32 vga_render_control;
+	u32 vga_hdp_control;
+	u32 d1crtc_control;
+	u32 d2crtc_control;
+};
 extern void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+extern void rv515_vga_render_disable(struct radeon_device *rdev);
+extern void rv515_set_safe_registers(struct radeon_device *rdev);
+extern void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save);
+extern void rv515_clock_startup(struct radeon_device *rdev);
+extern void rv515_debugfs(struct radeon_device *rdev);
+extern int rv515_suspend(struct radeon_device *rdev);
 
 /* rs690, rs740 */
 extern void rs690_line_buffer_adjust(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 8968f78..c8a4e7b 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -420,41 +420,43 @@
  * rv515
  */
 int rv515_init(struct radeon_device *rdev);
-void rv515_errata(struct radeon_device *rdev);
-void rv515_vram_info(struct radeon_device *rdev);
+void rv515_fini(struct radeon_device *rdev);
 int rv515_gpu_reset(struct radeon_device *rdev);
-int rv515_mc_init(struct radeon_device *rdev);
-void rv515_mc_fini(struct radeon_device *rdev);
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_bandwidth_update(struct radeon_device *rdev);
+int rv515_resume(struct radeon_device *rdev);
+int rv515_suspend(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
 	.init = &rv515_init,
-	.errata = &rv515_errata,
-	.vram_info = &rv515_vram_info,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &rv515_resume,
+	.errata = NULL,
+	.vram_info = NULL,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &rv515_mc_init,
-	.mc_fini = &rv515_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
+	.mc_init = NULL,
+	.mc_fini = NULL,
+	.wb_init = NULL,
+	.wb_fini = NULL,
 	.gart_init = &rv370_pcie_gart_init,
 	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
+	.gart_enable = NULL,
+	.gart_disable = NULL,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
+	.cp_init = NULL,
+	.cp_fini = NULL,
+	.cp_disable = NULL,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
+	.ib_test = NULL,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -476,35 +478,35 @@
 /*
  * r520,rv530,rv560,rv570,r580
  */
-void r520_errata(struct radeon_device *rdev);
-void r520_vram_info(struct radeon_device *rdev);
-int r520_mc_init(struct radeon_device *rdev);
-void r520_mc_fini(struct radeon_device *rdev);
-void r520_bandwidth_update(struct radeon_device *rdev);
+int r520_init(struct radeon_device *rdev);
+int r520_resume(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
-	.init = &rv515_init,
-	.errata = &r520_errata,
-	.vram_info = &r520_vram_info,
+	.init = &r520_init,
+	.fini = &rv515_fini,
+	.suspend = &rv515_suspend,
+	.resume = &r520_resume,
+	.errata = NULL,
+	.vram_info = NULL,
 	.vga_set_state = &r100_vga_set_state,
 	.gpu_reset = &rv515_gpu_reset,
-	.mc_init = &r520_mc_init,
-	.mc_fini = &r520_mc_fini,
-	.wb_init = &r100_wb_init,
-	.wb_fini = &r100_wb_fini,
-	.gart_init = &rv370_pcie_gart_init,
-	.gart_fini = &rv370_pcie_gart_fini,
-	.gart_enable = &rv370_pcie_gart_enable,
-	.gart_disable = &rv370_pcie_gart_disable,
+	.mc_init = NULL,
+	.mc_fini = NULL,
+	.wb_init = NULL,
+	.wb_fini = NULL,
+	.gart_init = NULL,
+	.gart_fini = NULL,
+	.gart_enable = NULL,
+	.gart_disable = NULL,
 	.gart_tlb_flush = &rv370_pcie_gart_tlb_flush,
 	.gart_set_page = &rv370_pcie_gart_set_page,
-	.cp_init = &r100_cp_init,
-	.cp_fini = &r100_cp_fini,
-	.cp_disable = &r100_cp_disable,
+	.cp_init = NULL,
+	.cp_fini = NULL,
+	.cp_disable = NULL,
 	.cp_commit = &r100_cp_commit,
 	.ring_start = &rv515_ring_start,
 	.ring_test = &r100_ring_test,
 	.ring_ib_execute = &r100_ring_ib_execute,
-	.ib_test = &r100_ib_test,
+	.ib_test = NULL,
 	.irq_set = &rs600_irq_set,
 	.irq_process = &rs600_irq_process,
 	.get_vblank_counter = &rs600_get_vblank_counter,
@@ -519,7 +521,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r100_set_surface_reg,
 	.clear_surface_reg = r100_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -596,7 +598,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 /*
@@ -646,7 +648,7 @@
 	.set_clock_gating = &radeon_atom_set_clock_gating,
 	.set_surface_reg = r600_set_surface_reg,
 	.clear_surface_reg = r600_clear_surface_reg,
-	.bandwidth_update = &r520_bandwidth_update,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 7437421..5b6c08c 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -272,12 +272,9 @@
 			    (le16_to_cpu(path->usConnObjectId) &
 			     OBJECT_TYPE_MASK) >> OBJECT_TYPE_SHIFT;
 
-			if ((le16_to_cpu(path->usDeviceTag) ==
-			     ATOM_DEVICE_TV1_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_TV2_SUPPORT)
-			    || (le16_to_cpu(path->usDeviceTag) ==
-				ATOM_DEVICE_CV_SUPPORT))
+			/* TODO CV support */
+			if (le16_to_cpu(path->usDeviceTag) ==
+				ATOM_DEVICE_CV_SUPPORT)
 				continue;
 
 			if ((rdev->family == CHIP_RS780) &&
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index af1d551..e376be4 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -26,6 +26,7 @@
 #include "drmP.h"
 #include "drm_edid.h"
 #include "drm_crtc_helper.h"
+#include "drm_fb_helper.h"
 #include "radeon_drm.h"
 #include "radeon.h"
 #include "atom.h"
@@ -245,7 +246,7 @@
 		if (common_modes[i].w < 320 || common_modes[i].h < 200)
 			continue;
 
-		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false);
+		mode = drm_cvt_mode(dev, common_modes[i].w, common_modes[i].h, 60, false, false, false);
 		drm_mode_probed_add(connector, mode);
 	}
 }
@@ -559,7 +560,7 @@
 		radeon_add_common_modes(encoder, connector);
 	else {
 		/* only 800x600 is supported right now on pre-avivo chips */
-		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false);
+		tv_mode = drm_cvt_mode(dev, 800, 600, 60, false, false, false);
 		tv_mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
 		drm_mode_probed_add(connector, tv_mode);
 	}
@@ -743,6 +744,15 @@
 	return NULL;
 }
 
+static void radeon_dvi_force(struct drm_connector *connector)
+{
+	struct radeon_connector *radeon_connector = to_radeon_connector(connector);
+	if (connector->force == DRM_FORCE_ON)
+		radeon_connector->use_digital = false;
+	if (connector->force == DRM_FORCE_ON_DIGITAL)
+		radeon_connector->use_digital = true;
+}
+
 struct drm_connector_helper_funcs radeon_dvi_connector_helper_funcs = {
 	.get_modes = radeon_dvi_get_modes,
 	.mode_valid = radeon_vga_mode_valid,
@@ -755,6 +765,7 @@
 	.fill_modes = drm_helper_probe_single_connector_modes,
 	.set_property = radeon_connector_set_property,
 	.destroy = radeon_connector_destroy,
+	.force = radeon_dvi_force,
 };
 
 void
@@ -771,6 +782,7 @@
 	struct radeon_connector *radeon_connector;
 	struct radeon_connector_atom_dig *radeon_dig_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -796,24 +808,30 @@
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -827,7 +845,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
@@ -837,6 +857,7 @@
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.coherent_mode_property,
 					      1);
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -850,7 +871,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "HDMI");
 			if (!radeon_connector->ddc_bus)
@@ -869,7 +892,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DP");
 			if (!radeon_connector->ddc_bus)
@@ -882,11 +907,14 @@
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
+			drm_connector_attach_property(&radeon_connector->base,
+						      rdev->mode_info.load_detect_property,
+						      1);
 		}
-		drm_connector_attach_property(&radeon_connector->base,
-					      rdev->mode_info.load_detect_property,
-					      1);
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
@@ -896,7 +924,9 @@
 		radeon_dig_connector->igp_lane_info = igp_lane_info;
 		radeon_connector->con_priv = radeon_dig_connector;
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
@@ -932,6 +962,7 @@
 	struct drm_connector *connector;
 	struct radeon_connector *radeon_connector;
 	uint32_t subpixel_order = SubPixelNone;
+	int ret;
 
 	/* fixme - tv/cv/din */
 	if (connector_type == DRM_MODE_CONNECTOR_Unknown)
@@ -957,24 +988,30 @@
 	switch (connector_type) {
 	case DRM_MODE_CONNECTOR_VGA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "VGA");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
 		break;
 	case DRM_MODE_CONNECTOR_DVIA:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_vga_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
 		}
+		radeon_connector->dac_load_detect = true;
 		drm_connector_attach_property(&radeon_connector->base,
 					      rdev->mode_info.load_detect_property,
 					      1);
@@ -982,11 +1019,14 @@
 	case DRM_MODE_CONNECTOR_DVII:
 	case DRM_MODE_CONNECTOR_DVID:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_dvi_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_dvi_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "DVI");
 			if (!radeon_connector->ddc_bus)
 				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -998,7 +1038,10 @@
 	case DRM_MODE_CONNECTOR_9PinDIN:
 		if (radeon_tv == 1) {
 			drm_connector_init(dev, &radeon_connector->base, &radeon_tv_connector_funcs, connector_type);
-			drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			ret = drm_connector_helper_add(&radeon_connector->base, &radeon_tv_connector_helper_funcs);
+			if (ret)
+				goto failed;
+			radeon_connector->dac_load_detect = true;
 			drm_connector_attach_property(&radeon_connector->base,
 						      rdev->mode_info.load_detect_property,
 						      1);
@@ -1006,7 +1049,9 @@
 		break;
 	case DRM_MODE_CONNECTOR_LVDS:
 		drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
-		drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		ret = drm_connector_helper_add(&radeon_connector->base, &radeon_lvds_connector_helper_funcs);
+		if (ret)
+			goto failed;
 		if (i2c_bus->valid) {
 			radeon_connector->ddc_bus = radeon_i2c_create(dev, i2c_bus, "LVDS");
 			if (!radeon_connector->ddc_bus)
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index 12f5990..5ab2cf9 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -142,15 +142,31 @@
 		}
 
 		p->chunks[i].length_dw = user_chunk.length_dw;
-		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		p->chunks[i].user_ptr = (void __user *)(unsigned long)user_chunk.chunk_data;
 
-		size = p->chunks[i].length_dw * sizeof(uint32_t);
-		p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
-		if (p->chunks[i].kdata == NULL) {
-			return -ENOMEM;
-		}
-		if (DRM_COPY_FROM_USER(p->chunks[i].kdata, cdata, size)) {
-			return -EFAULT;
+		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
+		if (p->chunks[i].chunk_id != RADEON_CHUNK_ID_IB) {
+			size = p->chunks[i].length_dw * sizeof(uint32_t);
+			p->chunks[i].kdata = kmalloc(size, GFP_KERNEL);
+			if (p->chunks[i].kdata == NULL) {
+				return -ENOMEM;
+			}
+			if (DRM_COPY_FROM_USER(p->chunks[i].kdata,
+					       p->chunks[i].user_ptr, size)) {
+				return -EFAULT;
+			}
+		} else {
+			p->chunks[i].kpage[0] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			p->chunks[i].kpage[1] = kmalloc(PAGE_SIZE, GFP_KERNEL);
+			if (p->chunks[i].kpage[0] == NULL || p->chunks[i].kpage[1] == NULL) {
+				kfree(p->chunks[i].kpage[0]);
+				kfree(p->chunks[i].kpage[1]);
+				return -ENOMEM;
+			}
+			p->chunks[i].kpage_idx[0] = -1;
+			p->chunks[i].kpage_idx[1] = -1;
+			p->chunks[i].last_copied_page = -1;
+			p->chunks[i].last_page_index = ((p->chunks[i].length_dw * 4) - 1) / PAGE_SIZE;
 		}
 	}
 	if (p->chunks[p->chunk_ib_idx].length_dw > (16 * 1024)) {
@@ -190,6 +206,8 @@
 	kfree(parser->relocs_ptr);
 	for (i = 0; i < parser->nchunks; i++) {
 		kfree(parser->chunks[i].kdata);
+		kfree(parser->chunks[i].kpage[0]);
+		kfree(parser->chunks[i].kpage[1]);
 	}
 	kfree(parser->chunks);
 	kfree(parser->chunks_array);
@@ -238,8 +256,14 @@
 	 * uncached). */
 	ib_chunk = &parser.chunks[parser.chunk_ib_idx];
 	parser.ib->length_dw = ib_chunk->length_dw;
-	memcpy((void *)parser.ib->ptr, ib_chunk->kdata, ib_chunk->length_dw*4);
 	r = radeon_cs_parse(&parser);
+	if (r || parser.parser_error) {
+		DRM_ERROR("Invalid command stream !\n");
+		radeon_cs_parser_fini(&parser, r);
+		mutex_unlock(&rdev->cs_mutex);
+		return r;
+	}
+	r = radeon_cs_finish_pages(&parser);
 	if (r) {
 		DRM_ERROR("Invalid command stream !\n");
 		radeon_cs_parser_fini(&parser, r);
@@ -254,3 +278,64 @@
 	mutex_unlock(&rdev->cs_mutex);
 	return r;
 }
+
+int radeon_cs_finish_pages(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i <= ibc->last_page_index; i++) {
+		if (i == ibc->last_page_index) {
+			size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+		}
+		
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       size))
+			return -EFAULT;
+	}
+	return 0;
+}
+
+int radeon_cs_update_pages(struct radeon_cs_parser *p, int pg_idx)
+{
+	int new_page;
+	struct radeon_cs_chunk *ibc = &p->chunks[p->chunk_ib_idx];
+	int i;
+	int size = PAGE_SIZE;
+
+	for (i = ibc->last_copied_page + 1; i < pg_idx; i++) {
+		if (DRM_COPY_FROM_USER(p->ib->ptr + (i * (PAGE_SIZE/4)),
+				       ibc->user_ptr + (i * PAGE_SIZE),
+				       PAGE_SIZE)) {
+			p->parser_error = -EFAULT;
+			return 0;
+		}
+	}
+
+	new_page = ibc->kpage_idx[0] < ibc->kpage_idx[1] ? 0 : 1;
+
+	if (pg_idx == ibc->last_page_index) {
+		size = (ibc->length_dw * 4) % PAGE_SIZE;
+			if (size == 0)
+				size = PAGE_SIZE;
+	}
+
+	if (DRM_COPY_FROM_USER(ibc->kpage[new_page],
+			       ibc->user_ptr + (pg_idx * PAGE_SIZE),
+			       size)) {
+		p->parser_error = -EFAULT;
+		return 0;
+	}
+
+	/* copy to IB here */
+	memcpy((void *)(p->ib->ptr+(pg_idx*(PAGE_SIZE/4))), ibc->kpage[new_page], size);
+
+	ibc->last_copied_page = pg_idx;
+	ibc->kpage_idx[new_page] = pg_idx;
+
+	return new_page;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index daf5db7..ec835d5 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -532,10 +532,13 @@
 
 	if (radeon_agpmode == -1) {
 		rdev->flags &= ~RADEON_IS_AGP;
-		if (rdev->family >= CHIP_RV515 ||
-		    rdev->family == CHIP_RV380 ||
-		    rdev->family == CHIP_RV410 ||
-		    rdev->family == CHIP_R423) {
+		if (rdev->family >= CHIP_R600) {
+			DRM_INFO("Forcing AGP to PCIE mode\n");
+			rdev->flags |= RADEON_IS_PCIE;
+		} else if (rdev->family >= CHIP_RV515 ||
+			   rdev->family == CHIP_RV380 ||
+			   rdev->family == CHIP_RV410 ||
+			   rdev->family == CHIP_R423) {
 			DRM_INFO("Forcing AGP to PCIE mode\n");
 			rdev->flags |= RADEON_IS_PCIE;
 			rdev->asic->gart_init = &rv370_pcie_gart_init;
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 50fce49..7f50fb8 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -62,9 +62,6 @@
 int radeon_driver_irq_postinstall_kms(struct drm_device *dev);
 void radeon_driver_irq_uninstall_kms(struct drm_device *dev);
 irqreturn_t radeon_driver_irq_handler_kms(DRM_IRQ_ARGS);
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master);
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master);
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
 			 struct drm_file *file_priv);
 int radeon_gem_object_init(struct drm_gem_object *obj);
@@ -260,8 +257,6 @@
 	.get_vblank_counter = radeon_get_vblank_counter_kms,
 	.enable_vblank = radeon_enable_vblank_kms,
 	.disable_vblank = radeon_disable_vblank_kms,
-	.master_create = radeon_master_create_kms,
-	.master_destroy = radeon_master_destroy_kms,
 #if defined(CONFIG_DEBUG_FS)
 	.debugfs_init = radeon_debugfs_init,
 	.debugfs_cleanup = radeon_debugfs_cleanup,
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 944e4fa..1ba704e 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -128,6 +128,7 @@
 int radeonfb_create(struct drm_device *dev,
 		    uint32_t fb_width, uint32_t fb_height,
 		    uint32_t surface_width, uint32_t surface_height,
+		    uint32_t surface_depth, uint32_t surface_bpp,
 		    struct drm_framebuffer **fb_p)
 {
 	struct radeon_device *rdev = dev->dev_private;
@@ -148,10 +149,10 @@
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
-	mode_cmd.bpp = 32;
+	mode_cmd.bpp = surface_bpp;
 	/* need to align pitch with crtc limits */
 	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
-	mode_cmd.depth = 24;
+	mode_cmd.depth = surface_depth;
 
 	size = mode_cmd.pitch * mode_cmd.height;
 	aligned_size = ALIGN(size, PAGE_SIZE);
@@ -290,13 +291,26 @@
 	return ret;
 }
 
+static char *mode_option;
+int radeon_parse_options(char *options)
+{
+	char *this_opt;
+
+	if (!options || !*options)
+		return 0;
+
+	while ((this_opt = strsep(&options, ",")) != NULL) {
+		if (!*this_opt)
+			continue;
+		mode_option = this_opt;
+	}
+	return 0;
+}
+
 int radeonfb_probe(struct drm_device *dev)
 {
-	int ret;
-	ret = drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
-	return ret;
+	return drm_fb_helper_single_fb_probe(dev, &radeonfb_create);
 }
-EXPORT_SYMBOL(radeonfb_probe);
 
 int radeonfb_remove(struct drm_device *dev, struct drm_framebuffer *fb)
 {
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 709bd89..ba12862 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -201,55 +201,6 @@
 
 
 /*
- * For multiple master (like multiple X).
- */
-struct drm_radeon_master_private {
-	drm_local_map_t *sarea;
-	drm_radeon_sarea_t *sarea_priv;
-};
-
-int radeon_master_create_kms(struct drm_device *dev, struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv;
-	unsigned long sareapage;
-	int ret;
-
-	master_priv = kzalloc(sizeof(*master_priv), GFP_KERNEL);
-	if (master_priv == NULL) {
-		return -ENOMEM;
-	}
-	/* prebuild the SAREA */
-	sareapage = max_t(unsigned long, SAREA_MAX, PAGE_SIZE);
-	ret = drm_addmap(dev, 0, sareapage, _DRM_SHM,
-			 _DRM_CONTAINS_LOCK,
-			 &master_priv->sarea);
-	if (ret) {
-		DRM_ERROR("SAREA setup failed\n");
-		return ret;
-	}
-	master_priv->sarea_priv = master_priv->sarea->handle + sizeof(struct drm_sarea);
-	master_priv->sarea_priv->pfCurrentPage = 0;
-	master->driver_priv = master_priv;
-	return 0;
-}
-
-void radeon_master_destroy_kms(struct drm_device *dev,
-			       struct drm_master *master)
-{
-	struct drm_radeon_master_private *master_priv = master->driver_priv;
-
-	if (master_priv == NULL) {
-		return;
-	}
-	if (master_priv->sarea) {
-		drm_rmmap_locked(dev, master_priv->sarea);
-	}
-	kfree(master_priv);
-	master->driver_priv = NULL;
-}
-
-
-/*
  * IOCTL.
  */
 int radeon_dma_ioctl_kms(struct drm_device *dev, void *data,
diff --git a/drivers/gpu/drm/radeon/radeon_reg.h b/drivers/gpu/drm/radeon/radeon_reg.h
index 21da871..bfa1ab9 100644
--- a/drivers/gpu/drm/radeon/radeon_reg.h
+++ b/drivers/gpu/drm/radeon/radeon_reg.h
@@ -3333,6 +3333,7 @@
 #       define RADEON_CP_PACKET_MAX_DWORDS          (1 << 12)
 #       define RADEON_CP_PACKET0_REG_MASK           0x000007ff
 #       define R300_CP_PACKET0_REG_MASK             0x00001fff
+#       define R600_CP_PACKET0_REG_MASK             0x0000ffff
 #       define RADEON_CP_PACKET1_REG0_MASK          0x000007ff
 #       define RADEON_CP_PACKET1_REG1_MASK          0x003ff800
 
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index acd889c..765bd18 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -530,7 +530,7 @@
 }
 
 static struct vm_operations_struct radeon_ttm_vm_ops;
-static struct vm_operations_struct *ttm_vm_ops = NULL;
+static const struct vm_operations_struct *ttm_vm_ops = NULL;
 
 static int radeon_ttm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 {
@@ -689,9 +689,6 @@
 
 #define RADEON_DEBUGFS_MEM_TYPES 2
 
-static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
-static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
-
 #if defined(CONFIG_DEBUG_FS)
 static int radeon_mm_dump_table(struct seq_file *m, void *data)
 {
@@ -711,9 +708,11 @@
 
 static int radeon_ttm_debugfs_init(struct radeon_device *rdev)
 {
+#if defined(CONFIG_DEBUG_FS)
+	static struct drm_info_list radeon_mem_types_list[RADEON_DEBUGFS_MEM_TYPES];
+	static char radeon_mem_types_names[RADEON_DEBUGFS_MEM_TYPES][32];
 	unsigned i;
 
-#if defined(CONFIG_DEBUG_FS)
 	for (i = 0; i < RADEON_DEBUGFS_MEM_TYPES; i++) {
 		if (i == 0)
 			sprintf(radeon_mem_types_names[i], "radeon_vram_mm");
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index 0e791e26..4a4fe1c 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -28,7 +28,6 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
-#include "avivod.h"
 
 #include "rs600_reg_safe.h"
 
@@ -45,7 +44,6 @@
  */
 void rs600_gpu_init(struct radeon_device *rdev);
 int rs600_mc_wait_for_idle(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
 
 /*
@@ -198,7 +196,7 @@
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 
 	tmp = RREG32(AVIVO_D1VGA_CONTROL);
 	WREG32(AVIVO_D1VGA_CONTROL, tmp & ~AVIVO_DVGA_CONTROL_MODE_ENABLE);
@@ -346,20 +344,6 @@
 /*
  * Global GPU functions
  */
-void rs600_disable_vga(struct radeon_device *rdev)
-{
-	unsigned tmp;
-
-	WREG32(0x330, 0);
-	WREG32(0x338, 0);
-	tmp = RREG32(0x300);
-	tmp &= ~(3 << 16);
-	WREG32(0x300, tmp);
-	WREG32(0x308, (1 << 8));
-	WREG32(0x310, rdev->mc.vram_location);
-	WREG32(0x594, 0);
-}
-
 int rs600_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -385,7 +369,7 @@
 {
 	/* FIXME: HDP same place on rs600 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
 	if (rs600_mc_wait_for_idle(rdev)) {
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 0f585ca..7a0098d 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -40,7 +40,6 @@
 int rs400_gart_enable(struct radeon_device *rdev);
 void rs400_gart_adjust_size(struct radeon_device *rdev);
 void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
 /* This files gather functions specifics to :
  * rs690,rs740
@@ -125,7 +124,7 @@
 {
 	/* FIXME: HDP same place on rs690 ? */
 	r100_hdp_reset(rdev);
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 	/* FIXME: is this correct ? */
 	r420_pipes_init(rdev);
 	if (rs690_mc_wait_for_idle(rdev)) {
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index fd79974..e53b5ca 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -29,37 +29,17 @@
 #include "drmP.h"
 #include "rv515d.h"
 #include "radeon.h"
-
+#include "atom.h"
 #include "rv515_reg_safe.h"
-/* rv515 depends on : */
-void r100_hdp_reset(struct radeon_device *rdev);
-int r100_cp_reset(struct radeon_device *rdev);
-int r100_rb2d_reset(struct radeon_device *rdev);
-int r100_gui_wait_for_idle(struct radeon_device *rdev);
-int r100_cp_init(struct radeon_device *rdev, unsigned ring_size);
-void r420_pipes_init(struct radeon_device *rdev);
-void rs600_mc_disable_clients(struct radeon_device *rdev);
-void rs600_disable_vga(struct radeon_device *rdev);
 
-/* This files gather functions specifics to:
- * rv515
- *
- * Some of these functions might be used by newer ASICs.
- */
+/* This files gather functions specifics to: rv515 */
 int rv515_debugfs_pipes_info_init(struct radeon_device *rdev);
 int rv515_debugfs_ga_info_init(struct radeon_device *rdev);
 void rv515_gpu_init(struct radeon_device *rdev);
 int rv515_mc_wait_for_idle(struct radeon_device *rdev);
 
-
-/*
- * MC
- */
-int rv515_mc_init(struct radeon_device *rdev)
+void rv515_debugfs(struct radeon_device *rdev)
 {
-	uint32_t tmp;
-	int r;
-
 	if (r100_debugfs_rbbm_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for RBBM !\n");
 	}
@@ -69,67 +49,8 @@
 	if (rv515_debugfs_ga_info_init(rdev)) {
 		DRM_ERROR("Failed to register debugfs file for pipes !\n");
 	}
-
-	rv515_gpu_init(rdev);
-	rv370_pcie_gart_disable(rdev);
-
-	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
-	rdev->mc.gtt_location = 0xFFFFFFFFUL;
-	if (rdev->flags & RADEON_IS_AGP) {
-		r = radeon_agp_init(rdev);
-		if (r) {
-			printk(KERN_WARNING "[drm] Disabling AGP\n");
-			rdev->flags &= ~RADEON_IS_AGP;
-			rdev->mc.gtt_size = radeon_gart_size * 1024 * 1024;
-		} else {
-			rdev->mc.gtt_location = rdev->mc.agp_base;
-		}
-	}
-	r = radeon_mc_setup(rdev);
-	if (r) {
-		return r;
-	}
-
-	/* Program GPU memory space */
-	rs600_mc_disable_clients(rdev);
-	if (rv515_mc_wait_for_idle(rdev)) {
-		printk(KERN_WARNING "Failed to wait MC idle while "
-		       "programming pipes. Bad things might happen.\n");
-	}
-	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
-	tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32(0x134, tmp);
-	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
-	tmp = REG_SET(MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(MC_FB_LOCATION, tmp);
-	WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
-	WREG32(0x310, rdev->mc.vram_location);
-	if (rdev->flags & RADEON_IS_AGP) {
-		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(MC_AGP_LOCATION, tmp);
-		WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	} else {
-		WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(MC_AGP_BASE, 0);
-		WREG32_MC(MC_AGP_BASE_2, 0);
-	}
-	return 0;
 }
 
-void rv515_mc_fini(struct radeon_device *rdev)
-{
-}
-
-
-/*
- * Global GPU functions
- */
 void rv515_ring_start(struct radeon_device *rdev)
 {
 	int r;
@@ -198,11 +119,6 @@
 	radeon_ring_unlock_commit(rdev);
 }
 
-void rv515_errata(struct radeon_device *rdev)
-{
-	rdev->pll_errata = 0;
-}
-
 int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 {
 	unsigned i;
@@ -219,6 +135,12 @@
 	return -1;
 }
 
+void rv515_vga_render_disable(struct radeon_device *rdev)
+{
+	WREG32(R_000300_VGA_RENDER_CONTROL,
+		RREG32(R_000300_VGA_RENDER_CONTROL) & C_000300_VGA_VSTATUS_CNTL);
+}
+
 void rv515_gpu_init(struct radeon_device *rdev)
 {
 	unsigned pipe_select_current, gb_pipe_select, tmp;
@@ -231,7 +153,7 @@
 		       "reseting GPU. Bad things might happen.\n");
 	}
 
-	rs600_disable_vga(rdev);
+	rv515_vga_render_disable(rdev);
 
 	r420_pipes_init(rdev);
 	gb_pipe_select = RREG32(0x402C);
@@ -335,10 +257,6 @@
 	return 0;
 }
 
-
-/*
- * VRAM info
- */
 static void rv515_vram_get_type(struct radeon_device *rdev)
 {
 	uint32_t tmp;
@@ -374,10 +292,6 @@
 	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
-
-/*
- * Indirect registers accessor
- */
 uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
@@ -395,9 +309,6 @@
 	WREG32(MC_IND_INDEX, 0);
 }
 
-/*
- * Debugfs info
- */
 #if defined(CONFIG_DEBUG_FS)
 static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
 {
@@ -459,13 +370,258 @@
 #endif
 }
 
-/*
- * Asic initialization
- */
-int rv515_init(struct radeon_device *rdev)
+void rv515_mc_stop(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	save->d1vga_control = RREG32(R_000330_D1VGA_CONTROL);
+	save->d2vga_control = RREG32(R_000338_D2VGA_CONTROL);
+	save->vga_render_control = RREG32(R_000300_VGA_RENDER_CONTROL);
+	save->vga_hdp_control = RREG32(R_000328_VGA_HDP_CONTROL);
+	save->d1crtc_control = RREG32(R_006080_D1CRTC_CONTROL);
+	save->d2crtc_control = RREG32(R_006880_D2CRTC_CONTROL);
+
+	/* Stop all video */
+	WREG32(R_000330_D1VGA_CONTROL, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000300_VGA_RENDER_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, 0);
+	WREG32(R_006880_D2CRTC_CONTROL, 0);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+}
+
+void rv515_mc_resume(struct radeon_device *rdev, struct rv515_mc_save *save)
+{
+	WREG32(R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS, rdev->mc.vram_start);
+	WREG32(R_000310_VGA_MEMORY_BASE_ADDRESS, rdev->mc.vram_start);
+	/* Unlock host access */
+	WREG32(R_000328_VGA_HDP_CONTROL, save->vga_hdp_control);
+	mdelay(1);
+	/* Restore video state */
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 1);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 1);
+	WREG32(R_006080_D1CRTC_CONTROL, save->d1crtc_control);
+	WREG32(R_006880_D2CRTC_CONTROL, save->d2crtc_control);
+	WREG32(R_0060E8_D1CRTC_UPDATE_LOCK, 0);
+	WREG32(R_0068E8_D2CRTC_UPDATE_LOCK, 0);
+	WREG32(R_000330_D1VGA_CONTROL, save->d1vga_control);
+	WREG32(R_000338_D2VGA_CONTROL, save->d2vga_control);
+	WREG32(R_000300_VGA_RENDER_CONTROL, save->vga_render_control);
+}
+
+void rv515_mc_program(struct radeon_device *rdev)
+{
+	struct rv515_mc_save save;
+
+	/* Stops all mc clients */
+	rv515_mc_stop(rdev, &save);
+
+	/* Wait for mc idle */
+	if (rv515_mc_wait_for_idle(rdev))
+		dev_warn(rdev->dev, "Wait MC idle timeout before updating MC.\n");
+	/* Write VRAM size in case we are limiting it */
+	WREG32(R_0000F8_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Program MC, should be a 32bits limited address space */
+	WREG32_MC(R_000001_MC_FB_LOCATION,
+			S_000001_MC_FB_START(rdev->mc.vram_start >> 16) |
+			S_000001_MC_FB_TOP(rdev->mc.vram_end >> 16));
+	WREG32(R_000134_HDP_FB_LOCATION,
+		S_000134_HDP_FB_START(rdev->mc.vram_start >> 16));
+	if (rdev->flags & RADEON_IS_AGP) {
+		WREG32_MC(R_000002_MC_AGP_LOCATION,
+			S_000002_MC_AGP_START(rdev->mc.gtt_start >> 16) |
+			S_000002_MC_AGP_TOP(rdev->mc.gtt_end >> 16));
+		WREG32_MC(R_000003_MC_AGP_BASE, lower_32_bits(rdev->mc.agp_base));
+		WREG32_MC(R_000004_MC_AGP_BASE_2,
+			S_000004_AGP_BASE_ADDR_2(upper_32_bits(rdev->mc.agp_base)));
+	} else {
+		WREG32_MC(R_000002_MC_AGP_LOCATION, 0xFFFFFFFF);
+		WREG32_MC(R_000003_MC_AGP_BASE, 0);
+		WREG32_MC(R_000004_MC_AGP_BASE_2, 0);
+	}
+
+	rv515_mc_resume(rdev, &save);
+}
+
+void rv515_clock_startup(struct radeon_device *rdev)
+{
+	if (radeon_dynclks != -1 && radeon_dynclks)
+		radeon_atom_set_clock_gating(rdev, 1);
+	/* We need to force on some of the block */
+	WREG32_PLL(R_00000F_CP_DYN_CNTL,
+		RREG32_PLL(R_00000F_CP_DYN_CNTL) | S_00000F_CP_FORCEON(1));
+	WREG32_PLL(R_000011_E2_DYN_CNTL,
+		RREG32_PLL(R_000011_E2_DYN_CNTL) | S_000011_E2_FORCEON(1));
+	WREG32_PLL(R_000013_IDCT_DYN_CNTL,
+		RREG32_PLL(R_000013_IDCT_DYN_CNTL) | S_000013_IDCT_FORCEON(1));
+}
+
+static int rv515_startup(struct radeon_device *rdev)
+{
+	int r;
+
+	rv515_mc_program(rdev);
+	/* Resume clock */
+	rv515_clock_startup(rdev);
+	/* Initialize GPU configuration (# pipes, ...) */
+	rv515_gpu_init(rdev);
+	/* Initialize GART (initialize after TTM so we can allocate
+	 * memory through TTM but finalize after TTM) */
+	if (rdev->flags & RADEON_IS_PCIE) {
+		r = rv370_pcie_gart_enable(rdev);
+		if (r)
+			return r;
+	}
+	/* Enable IRQ */
+	rdev->irq.sw_int = true;
+	r100_irq_set(rdev);
+	/* 1M ring buffer */
+	r = r100_cp_init(rdev, 1024 * 1024);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing CP (%d).\n", r);
+		return r;
+	}
+	r = r100_wb_init(rdev);
+	if (r)
+		dev_err(rdev->dev, "failled initializing WB (%d).\n", r);
+	r = r100_ib_init(rdev);
+	if (r) {
+		dev_err(rdev->dev, "failled initializing IB (%d).\n", r);
+		return r;
+	}
+	return 0;
+}
+
+int rv515_resume(struct radeon_device *rdev)
+{
+	/* Make sur GART are not working */
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	/* Resume clock before doing reset */
+	rv515_clock_startup(rdev);
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev, "GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* post */
+	atom_asic_init(rdev->mode_info.atom_context);
+	/* Resume clock after posting */
+	rv515_clock_startup(rdev);
+	return rv515_startup(rdev);
+}
+
+int rv515_suspend(struct radeon_device *rdev)
+{
+	r100_cp_disable(rdev);
+	r100_wb_disable(rdev);
+	r100_irq_disable(rdev);
+	if (rdev->flags & RADEON_IS_PCIE)
+		rv370_pcie_gart_disable(rdev);
+	return 0;
+}
+
+void rv515_set_safe_registers(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = rv515_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(rv515_reg_safe_bm);
+}
+
+void rv515_fini(struct radeon_device *rdev)
+{
+	rv515_suspend(rdev);
+	r100_cp_fini(rdev);
+	r100_wb_fini(rdev);
+	r100_ib_fini(rdev);
+	radeon_gem_fini(rdev);
+    rv370_pcie_gart_fini(rdev);
+	radeon_agp_fini(rdev);
+	radeon_irq_kms_fini(rdev);
+	radeon_fence_driver_fini(rdev);
+	radeon_object_fini(rdev);
+	radeon_atombios_fini(rdev);
+	kfree(rdev->bios);
+	rdev->bios = NULL;
+}
+
+int rv515_init(struct radeon_device *rdev)
+{
+	int r;
+
+	rdev->new_init_path = true;
+	/* Initialize scratch registers */
+	radeon_scratch_init(rdev);
+	/* Initialize surface registers */
+	radeon_surface_init(rdev);
+	/* TODO: disable VGA need to use VGA request */
+	/* BIOS*/
+	if (!radeon_get_bios(rdev)) {
+		if (ASIC_IS_AVIVO(rdev))
+			return -EINVAL;
+	}
+	if (rdev->is_atom_bios) {
+		r = radeon_atombios_init(rdev);
+		if (r)
+			return r;
+	} else {
+		dev_err(rdev->dev, "Expecting atombios for RV515 GPU\n");
+		return -EINVAL;
+	}
+	/* Reset gpu before posting otherwise ATOM will enter infinite loop */
+	if (radeon_gpu_reset(rdev)) {
+		dev_warn(rdev->dev,
+			"GPU reset failed ! (0xE40=0x%08X, 0x7C0=0x%08X)\n",
+			RREG32(R_000E40_RBBM_STATUS),
+			RREG32(R_0007C0_CP_STAT));
+	}
+	/* check if cards are posted or not */
+	if (!radeon_card_posted(rdev) && rdev->bios) {
+		DRM_INFO("GPU not posted. posting now...\n");
+		atom_asic_init(rdev->mode_info.atom_context);
+	}
+	/* Initialize clocks */
+	radeon_get_clock_info(rdev->ddev);
+	/* Get vram informations */
+	rv515_vram_info(rdev);
+	/* Initialize memory controller (also test AGP) */
+	r = r420_mc_init(rdev);
+	if (r)
+		return r;
+	rv515_debugfs(rdev);
+	/* Fence driver */
+	r = radeon_fence_driver_init(rdev);
+	if (r)
+		return r;
+	r = radeon_irq_kms_init(rdev);
+	if (r)
+		return r;
+	/* Memory manager */
+	r = radeon_object_init(rdev);
+	if (r)
+		return r;
+	r = rv370_pcie_gart_init(rdev);
+	if (r)
+		return r;
+	rv515_set_safe_registers(rdev);
+	rdev->accel_working = true;
+	r = rv515_startup(rdev);
+	if (r) {
+		/* Somethings want wront with the accel init stop accel */
+		dev_err(rdev->dev, "Disabling GPU acceleration\n");
+		rv515_suspend(rdev);
+		r100_cp_fini(rdev);
+		r100_wb_fini(rdev);
+		r100_ib_fini(rdev);
+		rv370_pcie_gart_fini(rdev);
+		radeon_agp_fini(rdev);
+		radeon_irq_kms_fini(rdev);
+		rdev->accel_working = false;
+	}
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/radeon/rv515d.h b/drivers/gpu/drm/radeon/rv515d.h
index a65e17e..fc216e4 100644
--- a/drivers/gpu/drm/radeon/rv515d.h
+++ b/drivers/gpu/drm/radeon/rv515d.h
@@ -216,5 +216,388 @@
 #define CP_PACKET0_GET_ONE_REG_WR(h) (((h) >> 15) & 1)
 #define CP_PACKET3_GET_OPCODE(h) (((h) >> 8) & 0xFF)
 
-#endif
+/* Registers */
+#define R_0000F8_CONFIG_MEMSIZE                      0x0000F8
+#define   S_0000F8_CONFIG_MEMSIZE(x)                   (((x) & 0xFFFFFFFF) << 0)
+#define   G_0000F8_CONFIG_MEMSIZE(x)                   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_0000F8_CONFIG_MEMSIZE                      0x00000000
+#define R_000134_HDP_FB_LOCATION                     0x000134
+#define   S_000134_HDP_FB_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000134_HDP_FB_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000134_HDP_FB_START                        0xFFFF0000
+#define R_000300_VGA_RENDER_CONTROL                  0x000300
+#define   S_000300_VGA_BLINK_RATE(x)                   (((x) & 0x1F) << 0)
+#define   G_000300_VGA_BLINK_RATE(x)                   (((x) >> 0) & 0x1F)
+#define   C_000300_VGA_BLINK_RATE                      0xFFFFFFE0
+#define   S_000300_VGA_BLINK_MODE(x)                   (((x) & 0x3) << 5)
+#define   G_000300_VGA_BLINK_MODE(x)                   (((x) >> 5) & 0x3)
+#define   C_000300_VGA_BLINK_MODE                      0xFFFFFF9F
+#define   S_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) & 0x1) << 7)
+#define   G_000300_VGA_CURSOR_BLINK_INVERT(x)          (((x) >> 7) & 0x1)
+#define   C_000300_VGA_CURSOR_BLINK_INVERT             0xFFFFFF7F
+#define   S_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) & 0x1) << 8)
+#define   G_000300_VGA_EXTD_ADDR_COUNT_ENABLE(x)       (((x) >> 8) & 0x1)
+#define   C_000300_VGA_EXTD_ADDR_COUNT_ENABLE          0xFFFFFEFF
+#define   S_000300_VGA_VSTATUS_CNTL(x)                 (((x) & 0x3) << 16)
+#define   G_000300_VGA_VSTATUS_CNTL(x)                 (((x) >> 16) & 0x3)
+#define   C_000300_VGA_VSTATUS_CNTL                    0xFFFCFFFF
+#define   S_000300_VGA_LOCK_8DOT(x)                    (((x) & 0x1) << 24)
+#define   G_000300_VGA_LOCK_8DOT(x)                    (((x) >> 24) & 0x1)
+#define   C_000300_VGA_LOCK_8DOT                       0xFEFFFFFF
+#define   S_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) & 0x1) << 25)
+#define   G_000300_VGAREG_LINECMP_COMPATIBILITY_SEL(x) (((x) >> 25) & 0x1)
+#define   C_000300_VGAREG_LINECMP_COMPATIBILITY_SEL    0xFDFFFFFF
+#define R_000310_VGA_MEMORY_BASE_ADDRESS             0x000310
+#define   S_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) & 0xFFFFFFFF) << 0)
+#define   G_000310_VGA_MEMORY_BASE_ADDRESS(x)          (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000310_VGA_MEMORY_BASE_ADDRESS             0x00000000
+#define R_000328_VGA_HDP_CONTROL                     0x000328
+#define   S_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) & 0x1) << 0)
+#define   G_000328_VGA_MEM_PAGE_SELECT_EN(x)           (((x) >> 0) & 0x1)
+#define   C_000328_VGA_MEM_PAGE_SELECT_EN              0xFFFFFFFE
+#define   S_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) & 0x1) << 8)
+#define   G_000328_VGA_RBBM_LOCK_DISABLE(x)            (((x) >> 8) & 0x1)
+#define   C_000328_VGA_RBBM_LOCK_DISABLE               0xFFFFFEFF
+#define   S_000328_VGA_SOFT_RESET(x)                   (((x) & 0x1) << 16)
+#define   G_000328_VGA_SOFT_RESET(x)                   (((x) >> 16) & 0x1)
+#define   C_000328_VGA_SOFT_RESET                      0xFFFEFFFF
+#define   S_000328_VGA_TEST_RESET_CONTROL(x)           (((x) & 0x1) << 24)
+#define   G_000328_VGA_TEST_RESET_CONTROL(x)           (((x) >> 24) & 0x1)
+#define   C_000328_VGA_TEST_RESET_CONTROL              0xFEFFFFFF
+#define R_000330_D1VGA_CONTROL                       0x000330
+#define   S_000330_D1VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000330_D1VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000330_D1VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000330_D1VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000330_D1VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000330_D1VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000330_D1VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000330_D1VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000330_D1VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000330_D1VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000330_D1VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000330_D1VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000330_D1VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000330_D1VGA_ROTATE                        0xFCFFFFFF
+#define R_000338_D2VGA_CONTROL                       0x000338
+#define   S_000338_D2VGA_MODE_ENABLE(x)                (((x) & 0x1) << 0)
+#define   G_000338_D2VGA_MODE_ENABLE(x)                (((x) >> 0) & 0x1)
+#define   C_000338_D2VGA_MODE_ENABLE                   0xFFFFFFFE
+#define   S_000338_D2VGA_TIMING_SELECT(x)              (((x) & 0x1) << 8)
+#define   G_000338_D2VGA_TIMING_SELECT(x)              (((x) >> 8) & 0x1)
+#define   C_000338_D2VGA_TIMING_SELECT                 0xFFFFFEFF
+#define   S_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) & 0x1) << 9)
+#define   G_000338_D2VGA_SYNC_POLARITY_SELECT(x)       (((x) >> 9) & 0x1)
+#define   C_000338_D2VGA_SYNC_POLARITY_SELECT          0xFFFFFDFF
+#define   S_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) & 0x1) << 10)
+#define   G_000338_D2VGA_OVERSCAN_TIMING_SELECT(x)     (((x) >> 10) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_TIMING_SELECT        0xFFFFFBFF
+#define   S_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) & 0x1) << 16)
+#define   G_000338_D2VGA_OVERSCAN_COLOR_EN(x)          (((x) >> 16) & 0x1)
+#define   C_000338_D2VGA_OVERSCAN_COLOR_EN             0xFFFEFFFF
+#define   S_000338_D2VGA_ROTATE(x)                     (((x) & 0x3) << 24)
+#define   G_000338_D2VGA_ROTATE(x)                     (((x) >> 24) & 0x3)
+#define   C_000338_D2VGA_ROTATE                        0xFCFFFFFF
+#define R_0007C0_CP_STAT                             0x0007C0
+#define   S_0007C0_MRU_BUSY(x)                         (((x) & 0x1) << 0)
+#define   G_0007C0_MRU_BUSY(x)                         (((x) >> 0) & 0x1)
+#define   C_0007C0_MRU_BUSY                            0xFFFFFFFE
+#define   S_0007C0_MWU_BUSY(x)                         (((x) & 0x1) << 1)
+#define   G_0007C0_MWU_BUSY(x)                         (((x) >> 1) & 0x1)
+#define   C_0007C0_MWU_BUSY                            0xFFFFFFFD
+#define   S_0007C0_RSIU_BUSY(x)                        (((x) & 0x1) << 2)
+#define   G_0007C0_RSIU_BUSY(x)                        (((x) >> 2) & 0x1)
+#define   C_0007C0_RSIU_BUSY                           0xFFFFFFFB
+#define   S_0007C0_RCIU_BUSY(x)                        (((x) & 0x1) << 3)
+#define   G_0007C0_RCIU_BUSY(x)                        (((x) >> 3) & 0x1)
+#define   C_0007C0_RCIU_BUSY                           0xFFFFFFF7
+#define   S_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) & 0x1) << 9)
+#define   G_0007C0_CSF_PRIMARY_BUSY(x)                 (((x) >> 9) & 0x1)
+#define   C_0007C0_CSF_PRIMARY_BUSY                    0xFFFFFDFF
+#define   S_0007C0_CSF_INDIRECT_BUSY(x)                (((x) & 0x1) << 10)
+#define   G_0007C0_CSF_INDIRECT_BUSY(x)                (((x) >> 10) & 0x1)
+#define   C_0007C0_CSF_INDIRECT_BUSY                   0xFFFFFBFF
+#define   S_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) & 0x1) << 11)
+#define   G_0007C0_CSQ_PRIMARY_BUSY(x)                 (((x) >> 11) & 0x1)
+#define   C_0007C0_CSQ_PRIMARY_BUSY                    0xFFFFF7FF
+#define   S_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) & 0x1) << 12)
+#define   G_0007C0_CSQ_INDIRECT_BUSY(x)                (((x) >> 12) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT_BUSY                   0xFFFFEFFF
+#define   S_0007C0_CSI_BUSY(x)                         (((x) & 0x1) << 13)
+#define   G_0007C0_CSI_BUSY(x)                         (((x) >> 13) & 0x1)
+#define   C_0007C0_CSI_BUSY                            0xFFFFDFFF
+#define   S_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) & 0x1) << 14)
+#define   G_0007C0_CSF_INDIRECT2_BUSY(x)               (((x) >> 14) & 0x1)
+#define   C_0007C0_CSF_INDIRECT2_BUSY                  0xFFFFBFFF
+#define   S_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) & 0x1) << 15)
+#define   G_0007C0_CSQ_INDIRECT2_BUSY(x)               (((x) >> 15) & 0x1)
+#define   C_0007C0_CSQ_INDIRECT2_BUSY                  0xFFFF7FFF
+#define   S_0007C0_GUIDMA_BUSY(x)                      (((x) & 0x1) << 28)
+#define   G_0007C0_GUIDMA_BUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_0007C0_GUIDMA_BUSY                         0xEFFFFFFF
+#define   S_0007C0_VIDDMA_BUSY(x)                      (((x) & 0x1) << 29)
+#define   G_0007C0_VIDDMA_BUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_0007C0_VIDDMA_BUSY                         0xDFFFFFFF
+#define   S_0007C0_CMDSTRM_BUSY(x)                     (((x) & 0x1) << 30)
+#define   G_0007C0_CMDSTRM_BUSY(x)                     (((x) >> 30) & 0x1)
+#define   C_0007C0_CMDSTRM_BUSY                        0xBFFFFFFF
+#define   S_0007C0_CP_BUSY(x)                          (((x) & 0x1) << 31)
+#define   G_0007C0_CP_BUSY(x)                          (((x) >> 31) & 0x1)
+#define   C_0007C0_CP_BUSY                             0x7FFFFFFF
+#define R_000E40_RBBM_STATUS                         0x000E40
+#define   S_000E40_CMDFIFO_AVAIL(x)                    (((x) & 0x7F) << 0)
+#define   G_000E40_CMDFIFO_AVAIL(x)                    (((x) >> 0) & 0x7F)
+#define   C_000E40_CMDFIFO_AVAIL                       0xFFFFFF80
+#define   S_000E40_HIRQ_ON_RBB(x)                      (((x) & 0x1) << 8)
+#define   G_000E40_HIRQ_ON_RBB(x)                      (((x) >> 8) & 0x1)
+#define   C_000E40_HIRQ_ON_RBB                         0xFFFFFEFF
+#define   S_000E40_CPRQ_ON_RBB(x)                      (((x) & 0x1) << 9)
+#define   G_000E40_CPRQ_ON_RBB(x)                      (((x) >> 9) & 0x1)
+#define   C_000E40_CPRQ_ON_RBB                         0xFFFFFDFF
+#define   S_000E40_CFRQ_ON_RBB(x)                      (((x) & 0x1) << 10)
+#define   G_000E40_CFRQ_ON_RBB(x)                      (((x) >> 10) & 0x1)
+#define   C_000E40_CFRQ_ON_RBB                         0xFFFFFBFF
+#define   S_000E40_HIRQ_IN_RTBUF(x)                    (((x) & 0x1) << 11)
+#define   G_000E40_HIRQ_IN_RTBUF(x)                    (((x) >> 11) & 0x1)
+#define   C_000E40_HIRQ_IN_RTBUF                       0xFFFFF7FF
+#define   S_000E40_CPRQ_IN_RTBUF(x)                    (((x) & 0x1) << 12)
+#define   G_000E40_CPRQ_IN_RTBUF(x)                    (((x) >> 12) & 0x1)
+#define   C_000E40_CPRQ_IN_RTBUF                       0xFFFFEFFF
+#define   S_000E40_CFRQ_IN_RTBUF(x)                    (((x) & 0x1) << 13)
+#define   G_000E40_CFRQ_IN_RTBUF(x)                    (((x) >> 13) & 0x1)
+#define   C_000E40_CFRQ_IN_RTBUF                       0xFFFFDFFF
+#define   S_000E40_CF_PIPE_BUSY(x)                     (((x) & 0x1) << 14)
+#define   G_000E40_CF_PIPE_BUSY(x)                     (((x) >> 14) & 0x1)
+#define   C_000E40_CF_PIPE_BUSY                        0xFFFFBFFF
+#define   S_000E40_ENG_EV_BUSY(x)                      (((x) & 0x1) << 15)
+#define   G_000E40_ENG_EV_BUSY(x)                      (((x) >> 15) & 0x1)
+#define   C_000E40_ENG_EV_BUSY                         0xFFFF7FFF
+#define   S_000E40_CP_CMDSTRM_BUSY(x)                  (((x) & 0x1) << 16)
+#define   G_000E40_CP_CMDSTRM_BUSY(x)                  (((x) >> 16) & 0x1)
+#define   C_000E40_CP_CMDSTRM_BUSY                     0xFFFEFFFF
+#define   S_000E40_E2_BUSY(x)                          (((x) & 0x1) << 17)
+#define   G_000E40_E2_BUSY(x)                          (((x) >> 17) & 0x1)
+#define   C_000E40_E2_BUSY                             0xFFFDFFFF
+#define   S_000E40_RB2D_BUSY(x)                        (((x) & 0x1) << 18)
+#define   G_000E40_RB2D_BUSY(x)                        (((x) >> 18) & 0x1)
+#define   C_000E40_RB2D_BUSY                           0xFFFBFFFF
+#define   S_000E40_RB3D_BUSY(x)                        (((x) & 0x1) << 19)
+#define   G_000E40_RB3D_BUSY(x)                        (((x) >> 19) & 0x1)
+#define   C_000E40_RB3D_BUSY                           0xFFF7FFFF
+#define   S_000E40_VAP_BUSY(x)                         (((x) & 0x1) << 20)
+#define   G_000E40_VAP_BUSY(x)                         (((x) >> 20) & 0x1)
+#define   C_000E40_VAP_BUSY                            0xFFEFFFFF
+#define   S_000E40_RE_BUSY(x)                          (((x) & 0x1) << 21)
+#define   G_000E40_RE_BUSY(x)                          (((x) >> 21) & 0x1)
+#define   C_000E40_RE_BUSY                             0xFFDFFFFF
+#define   S_000E40_TAM_BUSY(x)                         (((x) & 0x1) << 22)
+#define   G_000E40_TAM_BUSY(x)                         (((x) >> 22) & 0x1)
+#define   C_000E40_TAM_BUSY                            0xFFBFFFFF
+#define   S_000E40_TDM_BUSY(x)                         (((x) & 0x1) << 23)
+#define   G_000E40_TDM_BUSY(x)                         (((x) >> 23) & 0x1)
+#define   C_000E40_TDM_BUSY                            0xFF7FFFFF
+#define   S_000E40_PB_BUSY(x)                          (((x) & 0x1) << 24)
+#define   G_000E40_PB_BUSY(x)                          (((x) >> 24) & 0x1)
+#define   C_000E40_PB_BUSY                             0xFEFFFFFF
+#define   S_000E40_TIM_BUSY(x)                         (((x) & 0x1) << 25)
+#define   G_000E40_TIM_BUSY(x)                         (((x) >> 25) & 0x1)
+#define   C_000E40_TIM_BUSY                            0xFDFFFFFF
+#define   S_000E40_GA_BUSY(x)                          (((x) & 0x1) << 26)
+#define   G_000E40_GA_BUSY(x)                          (((x) >> 26) & 0x1)
+#define   C_000E40_GA_BUSY                             0xFBFFFFFF
+#define   S_000E40_CBA2D_BUSY(x)                       (((x) & 0x1) << 27)
+#define   G_000E40_CBA2D_BUSY(x)                       (((x) >> 27) & 0x1)
+#define   C_000E40_CBA2D_BUSY                          0xF7FFFFFF
+#define   S_000E40_RBBM_HIBUSY(x)                      (((x) & 0x1) << 28)
+#define   G_000E40_RBBM_HIBUSY(x)                      (((x) >> 28) & 0x1)
+#define   C_000E40_RBBM_HIBUSY                         0xEFFFFFFF
+#define   S_000E40_SKID_CFBUSY(x)                      (((x) & 0x1) << 29)
+#define   G_000E40_SKID_CFBUSY(x)                      (((x) >> 29) & 0x1)
+#define   C_000E40_SKID_CFBUSY                         0xDFFFFFFF
+#define   S_000E40_VAP_VF_BUSY(x)                      (((x) & 0x1) << 30)
+#define   G_000E40_VAP_VF_BUSY(x)                      (((x) >> 30) & 0x1)
+#define   C_000E40_VAP_VF_BUSY                         0xBFFFFFFF
+#define   S_000E40_GUI_ACTIVE(x)                       (((x) & 0x1) << 31)
+#define   G_000E40_GUI_ACTIVE(x)                       (((x) >> 31) & 0x1)
+#define   C_000E40_GUI_ACTIVE                          0x7FFFFFFF
+#define R_006080_D1CRTC_CONTROL                      0x006080
+#define   S_006080_D1CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006080_D1CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006080_D1CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006080_D1CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006080_D1CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006080_D1CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006080_D1CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006080_D1CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006080_D1CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006080_D1CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006080_D1CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0060E8_D1CRTC_UPDATE_LOCK                  0x0060E8
+#define   S_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0060E8_D1CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0060E8_D1CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x006110
+#define   S_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006110_D1GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x006118
+#define   S_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006118_D1GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
+#define R_006880_D2CRTC_CONTROL                      0x006880
+#define   S_006880_D2CRTC_MASTER_EN(x)                 (((x) & 0x1) << 0)
+#define   G_006880_D2CRTC_MASTER_EN(x)                 (((x) >> 0) & 0x1)
+#define   C_006880_D2CRTC_MASTER_EN                    0xFFFFFFFE
+#define   S_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) & 0x1) << 4)
+#define   G_006880_D2CRTC_SYNC_RESET_SEL(x)            (((x) >> 4) & 0x1)
+#define   C_006880_D2CRTC_SYNC_RESET_SEL               0xFFFFFFEF
+#define   S_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) & 0x3) << 8)
+#define   G_006880_D2CRTC_DISABLE_POINT_CNTL(x)        (((x) >> 8) & 0x3)
+#define   C_006880_D2CRTC_DISABLE_POINT_CNTL           0xFFFFFCFF
+#define   S_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) & 0x1) << 16)
+#define   G_006880_D2CRTC_CURRENT_MASTER_EN_STATE(x)   (((x) >> 16) & 0x1)
+#define   C_006880_D2CRTC_CURRENT_MASTER_EN_STATE      0xFFFEFFFF
+#define   S_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) & 0x1) << 24)
+#define   G_006880_D2CRTC_DISP_READ_REQUEST_DISABLE(x) (((x) >> 24) & 0x1)
+#define   C_006880_D2CRTC_DISP_READ_REQUEST_DISABLE    0xFEFFFFFF
+#define R_0068E8_D2CRTC_UPDATE_LOCK                  0x0068E8
+#define   S_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) & 0x1) << 0)
+#define   G_0068E8_D2CRTC_UPDATE_LOCK(x)               (((x) >> 0) & 0x1)
+#define   C_0068E8_D2CRTC_UPDATE_LOCK                  0xFFFFFFFE
+#define R_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x006910
+#define   S_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) & 0xFFFFFFFF) << 0)
+#define   G_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS(x)   (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006910_D2GRPH_PRIMARY_SURFACE_ADDRESS      0x00000000
+#define R_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x006918
+#define   S_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) & 0xFFFFFFFF) << 0)
+#define   G_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS(x) (((x) >> 0) & 0xFFFFFFFF)
+#define   C_006918_D2GRPH_SECONDARY_SURFACE_ADDRESS    0x00000000
 
+
+#define R_000001_MC_FB_LOCATION                      0x000001
+#define   S_000001_MC_FB_START(x)                      (((x) & 0xFFFF) << 0)
+#define   G_000001_MC_FB_START(x)                      (((x) >> 0) & 0xFFFF)
+#define   C_000001_MC_FB_START                         0xFFFF0000
+#define   S_000001_MC_FB_TOP(x)                        (((x) & 0xFFFF) << 16)
+#define   G_000001_MC_FB_TOP(x)                        (((x) >> 16) & 0xFFFF)
+#define   C_000001_MC_FB_TOP                           0x0000FFFF
+#define R_000002_MC_AGP_LOCATION                     0x000002
+#define   S_000002_MC_AGP_START(x)                     (((x) & 0xFFFF) << 0)
+#define   G_000002_MC_AGP_START(x)                     (((x) >> 0) & 0xFFFF)
+#define   C_000002_MC_AGP_START                        0xFFFF0000
+#define   S_000002_MC_AGP_TOP(x)                       (((x) & 0xFFFF) << 16)
+#define   G_000002_MC_AGP_TOP(x)                       (((x) >> 16) & 0xFFFF)
+#define   C_000002_MC_AGP_TOP                          0x0000FFFF
+#define R_000003_MC_AGP_BASE                         0x000003
+#define   S_000003_AGP_BASE_ADDR(x)                    (((x) & 0xFFFFFFFF) << 0)
+#define   G_000003_AGP_BASE_ADDR(x)                    (((x) >> 0) & 0xFFFFFFFF)
+#define   C_000003_AGP_BASE_ADDR                       0x00000000
+#define R_000004_MC_AGP_BASE_2                       0x000004
+#define   S_000004_AGP_BASE_ADDR_2(x)                  (((x) & 0xF) << 0)
+#define   G_000004_AGP_BASE_ADDR_2(x)                  (((x) >> 0) & 0xF)
+#define   C_000004_AGP_BASE_ADDR_2                     0xFFFFFFF0
+
+
+#define R_00000F_CP_DYN_CNTL                         0x00000F
+#define   S_00000F_CP_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_00000F_CP_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_00000F_CP_FORCEON                          0xFFFFFFFE
+#define   S_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_00000F_CP_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_00000F_CP_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_00000F_CP_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_00000F_CP_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_00000F_CP_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_00000F_CP_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_00000F_CP_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_00000F_CP_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_00000F_CP_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_00000F_CP_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_00000F_CP_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_00000F_CP_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_00000F_CP_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_00000F_CP_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_00000F_CP_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_00000F_CP_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_00000F_CP_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_00000F_CP_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_00000F_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_00000F_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_00000F_SPARE                               0xFF3FFFFF
+#define   S_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_00000F_CP_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_00000F_CP_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000011_E2_DYN_CNTL                         0x000011
+#define   S_000011_E2_FORCEON(x)                       (((x) & 0x1) << 0)
+#define   G_000011_E2_FORCEON(x)                       (((x) >> 0) & 0x1)
+#define   C_000011_E2_FORCEON                          0xFFFFFFFE
+#define   S_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) & 0x1) << 1)
+#define   G_000011_E2_MAX_DYN_STOP_LAT(x)              (((x) >> 1) & 0x1)
+#define   C_000011_E2_MAX_DYN_STOP_LAT                 0xFFFFFFFD
+#define   S_000011_E2_CLOCK_STATUS(x)                  (((x) & 0x1) << 2)
+#define   G_000011_E2_CLOCK_STATUS(x)                  (((x) >> 2) & 0x1)
+#define   C_000011_E2_CLOCK_STATUS                     0xFFFFFFFB
+#define   S_000011_E2_PROG_SHUTOFF(x)                  (((x) & 0x1) << 3)
+#define   G_000011_E2_PROG_SHUTOFF(x)                  (((x) >> 3) & 0x1)
+#define   C_000011_E2_PROG_SHUTOFF                     0xFFFFFFF7
+#define   S_000011_E2_PROG_DELAY_VALUE(x)              (((x) & 0xFF) << 4)
+#define   G_000011_E2_PROG_DELAY_VALUE(x)              (((x) >> 4) & 0xFF)
+#define   C_000011_E2_PROG_DELAY_VALUE                 0xFFFFF00F
+#define   S_000011_E2_LOWER_POWER_IDLE(x)              (((x) & 0xFF) << 12)
+#define   G_000011_E2_LOWER_POWER_IDLE(x)              (((x) >> 12) & 0xFF)
+#define   C_000011_E2_LOWER_POWER_IDLE                 0xFFF00FFF
+#define   S_000011_E2_LOWER_POWER_IGNORE(x)            (((x) & 0x1) << 20)
+#define   G_000011_E2_LOWER_POWER_IGNORE(x)            (((x) >> 20) & 0x1)
+#define   C_000011_E2_LOWER_POWER_IGNORE               0xFFEFFFFF
+#define   S_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) & 0x1) << 21)
+#define   G_000011_E2_NORMAL_POWER_IGNORE(x)           (((x) >> 21) & 0x1)
+#define   C_000011_E2_NORMAL_POWER_IGNORE              0xFFDFFFFF
+#define   S_000011_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000011_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000011_SPARE                               0xFF3FFFFF
+#define   S_000011_E2_NORMAL_POWER_BUSY(x)             (((x) & 0xFF) << 24)
+#define   G_000011_E2_NORMAL_POWER_BUSY(x)             (((x) >> 24) & 0xFF)
+#define   C_000011_E2_NORMAL_POWER_BUSY                0x00FFFFFF
+#define R_000013_IDCT_DYN_CNTL                       0x000013
+#define   S_000013_IDCT_FORCEON(x)                     (((x) & 0x1) << 0)
+#define   G_000013_IDCT_FORCEON(x)                     (((x) >> 0) & 0x1)
+#define   C_000013_IDCT_FORCEON                        0xFFFFFFFE
+#define   S_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) & 0x1) << 1)
+#define   G_000013_IDCT_MAX_DYN_STOP_LAT(x)            (((x) >> 1) & 0x1)
+#define   C_000013_IDCT_MAX_DYN_STOP_LAT               0xFFFFFFFD
+#define   S_000013_IDCT_CLOCK_STATUS(x)                (((x) & 0x1) << 2)
+#define   G_000013_IDCT_CLOCK_STATUS(x)                (((x) >> 2) & 0x1)
+#define   C_000013_IDCT_CLOCK_STATUS                   0xFFFFFFFB
+#define   S_000013_IDCT_PROG_SHUTOFF(x)                (((x) & 0x1) << 3)
+#define   G_000013_IDCT_PROG_SHUTOFF(x)                (((x) >> 3) & 0x1)
+#define   C_000013_IDCT_PROG_SHUTOFF                   0xFFFFFFF7
+#define   S_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) & 0xFF) << 4)
+#define   G_000013_IDCT_PROG_DELAY_VALUE(x)            (((x) >> 4) & 0xFF)
+#define   C_000013_IDCT_PROG_DELAY_VALUE               0xFFFFF00F
+#define   S_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) & 0xFF) << 12)
+#define   G_000013_IDCT_LOWER_POWER_IDLE(x)            (((x) >> 12) & 0xFF)
+#define   C_000013_IDCT_LOWER_POWER_IDLE               0xFFF00FFF
+#define   S_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) & 0x1) << 20)
+#define   G_000013_IDCT_LOWER_POWER_IGNORE(x)          (((x) >> 20) & 0x1)
+#define   C_000013_IDCT_LOWER_POWER_IGNORE             0xFFEFFFFF
+#define   S_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) & 0x1) << 21)
+#define   G_000013_IDCT_NORMAL_POWER_IGNORE(x)         (((x) >> 21) & 0x1)
+#define   C_000013_IDCT_NORMAL_POWER_IGNORE            0xFFDFFFFF
+#define   S_000013_SPARE(x)                            (((x) & 0x3) << 22)
+#define   G_000013_SPARE(x)                            (((x) >> 22) & 0x3)
+#define   C_000013_SPARE                               0xFF3FFFFF
+#define   S_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) & 0xFF) << 24)
+#define   G_000013_IDCT_NORMAL_POWER_BUSY(x)           (((x) >> 24) & 0xFF)
+#define   C_000013_IDCT_NORMAL_POWER_BUSY              0x00FFFFFF
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index b574c73..e0b97d1 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -31,8 +31,8 @@
 #include "radeon.h"
 #include "radeon_drm.h"
 #include "rv770d.h"
-#include "avivod.h"
 #include "atom.h"
+#include "avivod.h"
 
 #define R700_PFP_UCODE_SIZE 848
 #define R700_PM4_UCODE_SIZE 1360
@@ -231,7 +231,7 @@
 
 	/* we need to own VRAM, so turn off the VGA renderer here
 	 * to stop it overwriting our objects */
-	radeon_avivo_vga_render_disable(rdev);
+	rv515_vga_render_disable(rdev);
 }
 
 
@@ -801,6 +801,13 @@
 	/* Setup GPU memory space */
 	rdev->mc.mc_vram_size = RREG32(CONFIG_MEMSIZE);
 	rdev->mc.real_vram_size = RREG32(CONFIG_MEMSIZE);
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
 		if (r)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index 33de763..1c040d0 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -228,7 +228,7 @@
 	vma->vm_private_data = NULL;
 }
 
-static struct vm_operations_struct ttm_bo_vm_ops = {
+static const struct vm_operations_struct ttm_bo_vm_ops = {
 	.fault = ttm_bo_vm_fault,
 	.open = ttm_bo_vm_open,
 	.close = ttm_bo_vm_close
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index 0c6639e..ba05275 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -30,6 +30,7 @@
 #include <linux/major.h>
 #include <linux/hid.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 #include <linux/smp_lock.h>
 
 #include <linux/hidraw.h>
diff --git a/drivers/hwmon/fschmd.c b/drivers/hwmon/fschmd.c
index ea955ed..2a7a85a 100644
--- a/drivers/hwmon/fschmd.c
+++ b/drivers/hwmon/fschmd.c
@@ -915,7 +915,7 @@
 	return ret;
 }
 
-static struct file_operations watchdog_fops = {
+static const struct file_operations watchdog_fops = {
 	.owner = THIS_MODULE,
 	.llseek = no_llseek,
 	.open = watchdog_open,
diff --git a/drivers/hwmon/ltc4215.c b/drivers/hwmon/ltc4215.c
index 6c9a041..00d975e 100644
--- a/drivers/hwmon/ltc4215.c
+++ b/drivers/hwmon/ltc4215.c
@@ -20,11 +20,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4215);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4215_cmd {
 	LTC4215_CONTROL			= 0x00, /* rw */
@@ -246,9 +241,13 @@
 static int ltc4215_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	struct ltc4215_data *data;
 	int ret;
 
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -294,56 +293,20 @@
 	return 0;
 }
 
-static int ltc4215_detect(struct i2c_client *client,
-			  int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	if (kind < 0) {		/* probed detection - check the chip type */
-		s32 v;		/* 8 bits from the chip, or -ERRNO */
-
-		/*
-		 * Register 0x01 bit b7 is reserved, expect 0
-		 * Register 0x03 bit b6 and b7 are reserved, expect 0
-		 */
-		v = i2c_smbus_read_byte_data(client, LTC4215_ALERT);
-		if (v < 0 || (v & (1 << 7)) != 0)
-			return -ENODEV;
-
-		v = i2c_smbus_read_byte_data(client, LTC4215_FAULT);
-		if (v < 0 || (v & ((1 << 6) | (1 << 7))) != 0)
-				return -ENODEV;
-	}
-
-	strlcpy(info->type, "ltc4215", I2C_NAME_SIZE);
-	dev_info(&adapter->dev, "ltc4215 %s at address 0x%02x\n",
-			kind < 0 ? "probed" : "forced",
-			client->addr);
-
-	return 0;
-}
-
 static const struct i2c_device_id ltc4215_id[] = {
-	{ "ltc4215", ltc4215 },
+	{ "ltc4215", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4215_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4215_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ltc4215",
 	},
 	.probe		= ltc4215_probe,
 	.remove		= ltc4215_remove,
 	.id_table	= ltc4215_id,
-	.detect		= ltc4215_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init ltc4215_init(void)
diff --git a/drivers/hwmon/ltc4245.c b/drivers/hwmon/ltc4245.c
index e389643..65c232a 100644
--- a/drivers/hwmon/ltc4245.c
+++ b/drivers/hwmon/ltc4245.c
@@ -22,15 +22,6 @@
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
 
-/* Valid addresses are 0x20 - 0x3f
- *
- * For now, we do not probe, since some of these addresses
- * are known to be unfriendly to probing */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(ltc4245);
-
 /* Here are names of the chip's registers (a.k.a. commands) */
 enum ltc4245_cmd {
 	LTC4245_STATUS			= 0x00, /* readonly */
@@ -369,9 +360,13 @@
 static int ltc4245_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct i2c_adapter *adapter = client->adapter;
 	struct ltc4245_data *data;
 	int ret;
 
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -ENODEV;
+
 	data = kzalloc(sizeof(*data), GFP_KERNEL);
 	if (!data) {
 		ret = -ENOMEM;
@@ -418,136 +413,20 @@
 	return 0;
 }
 
-/* Check that some bits in a control register appear at all possible
- * locations without changing value
- *
- * @client: the i2c client to use
- * @reg: the register to read
- * @bits: the bits to check (0xff checks all bits,
- *                           0x03 checks only the last two bits)
- *
- * return -ERRNO if the register read failed
- * return -ENODEV if the register value doesn't stay constant at all
- * possible addresses
- *
- * return 0 for success
- */
-static int ltc4245_check_control_reg(struct i2c_client *client, u8 reg, u8 bits)
-{
-	int i;
-	s32 v, voff1, voff2;
-
-	/* Read register and check for error */
-	v = i2c_smbus_read_byte_data(client, reg);
-	if (v < 0)
-		return v;
-
-	v &= bits;
-
-	for (i = 0x00; i < 0xff; i += 0x20) {
-
-		voff1 = i2c_smbus_read_byte_data(client, reg + i);
-		if (voff1 < 0)
-			return voff1;
-
-		voff2 = i2c_smbus_read_byte_data(client, reg + i + 0x08);
-		if (voff2 < 0)
-			return voff2;
-
-		voff1 &= bits;
-		voff2 &= bits;
-
-		if (v != voff1 || v != voff2)
-			return -ENODEV;
-	}
-
-	return 0;
-}
-
-static int ltc4245_detect(struct i2c_client *client,
-			  int kind,
-			  struct i2c_board_info *info)
-{
-	struct i2c_adapter *adapter = client->adapter;
-
-	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -ENODEV;
-
-	if (kind < 0) {		/* probed detection - check the chip type */
-		s32 v;		/* 8 bits from the chip, or -ERRNO */
-
-		/* Chip registers 0x00-0x07 are control registers
-		 * Chip registers 0x10-0x1f are data registers
-		 *
-		 * Address bits b7-b5 are ignored. This makes the chip "repeat"
-		 * in steps of 0x20. Any control registers should appear with
-		 * the same values across all duplicated addresses.
-		 *
-		 * Register 0x02 bit b2 is reserved, expect 0
-		 * Register 0x07 bits b7 to b4 are reserved, expect 0
-		 *
-		 * Registers 0x01, 0x02 are control registers and should not
-		 * change on their own.
-		 *
-		 * Register 0x06 bits b6 and b7 are control bits, and should
-		 * not change on their own.
-		 *
-		 * Register 0x07 bits b3 to b0 are control bits, and should
-		 * not change on their own.
-		 */
-
-		/* read register 0x02 reserved bit, expect 0 */
-		v = i2c_smbus_read_byte_data(client, LTC4245_CONTROL);
-		if (v < 0 || (v & 0x04) != 0)
-			return -ENODEV;
-
-		/* read register 0x07 reserved bits, expect 0 */
-		v = i2c_smbus_read_byte_data(client, LTC4245_ADCADR);
-		if (v < 0 || (v & 0xf0) != 0)
-			return -ENODEV;
-
-		/* check that the alert register appears at all locations */
-		if (ltc4245_check_control_reg(client, LTC4245_ALERT, 0xff))
-			return -ENODEV;
-
-		/* check that the control register appears at all locations */
-		if (ltc4245_check_control_reg(client, LTC4245_CONTROL, 0xff))
-			return -ENODEV;
-
-		/* check that register 0x06 bits b6 and b7 stay constant */
-		if (ltc4245_check_control_reg(client, LTC4245_GPIO, 0xc0))
-			return -ENODEV;
-
-		/* check that register 0x07 bits b3-b0 stay constant */
-		if (ltc4245_check_control_reg(client, LTC4245_ADCADR, 0x0f))
-			return -ENODEV;
-	}
-
-	strlcpy(info->type, "ltc4245", I2C_NAME_SIZE);
-	dev_info(&adapter->dev, "ltc4245 %s at address 0x%02x\n",
-			kind < 0 ? "probed" : "forced",
-			client->addr);
-
-	return 0;
-}
-
 static const struct i2c_device_id ltc4245_id[] = {
-	{ "ltc4245", ltc4245 },
+	{ "ltc4245", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ltc4245_id);
 
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4245_driver = {
-	.class		= I2C_CLASS_HWMON,
 	.driver = {
 		.name	= "ltc4245",
 	},
 	.probe		= ltc4245_probe,
 	.remove		= ltc4245_remove,
 	.id_table	= ltc4245_id,
-	.detect		= ltc4245_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init ltc4245_init(void)
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6bedd2f..737335f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -477,8 +477,8 @@
 	  will be called i2c-pnx.
 
 config I2C_PXA
-	tristate "Intel PXA2XX I2C adapter (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && ARCH_PXA
+	tristate "Intel PXA2XX I2C adapter"
+	depends on ARCH_PXA || ARCH_MMP
 	help
 	  If you have devices in the PXA I2C bus, say yes to this option.
 	  This driver can also be built as a module.  If so, the module
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index f7d6fe9..8f0b90e 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -364,7 +364,7 @@
 	error = acpi_check_region(amd756_ioport, SMB_IOSIZE,
 				  amd756_driver.name);
 	if (error)
-		return error;
+		return -ENODEV;
 
 	if (!request_region(amd756_ioport, SMB_IOSIZE, amd756_driver.name)) {
 		dev_err(&pdev->dev, "SMB region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c
index a7c5990..5b4ad86 100644
--- a/drivers/i2c/busses/i2c-amd8111.c
+++ b/drivers/i2c/busses/i2c-amd8111.c
@@ -376,8 +376,10 @@
 	smbus->size = pci_resource_len(dev, 0);
 
 	error = acpi_check_resource_conflict(&dev->resource[0]);
-	if (error)
+	if (error) {
+		error = -ENODEV;
 		goto out_kfree;
+	}
 
 	if (!request_region(smbus->base, smbus->size, amd8111_driver.name)) {
 		error = -EBUSY;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 9d2c5ad..55edcfe 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -732,8 +732,10 @@
 	}
 
 	err = acpi_check_resource_conflict(&dev->resource[SMBBAR]);
-	if (err)
+	if (err) {
+		err = -ENODEV;
 		goto exit;
+	}
 
 	err = pci_request_region(dev, SMBBAR, i801_driver.name);
 	if (err) {
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index 9f6b8e0..dba6eb0 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -281,7 +281,7 @@
 		return -ENODEV;
 	}
 	if (acpi_check_region(sch_smba, SMBIOSIZE, sch_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 	if (!request_region(sch_smba, SMBIOSIZE, sch_driver.name)) {
 		dev_err(&dev->dev, "SMBus region 0x%x already in use!\n",
 			sch_smba);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a782c7a..d26a972 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -169,7 +169,7 @@
 	}
 
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 
 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
@@ -260,7 +260,7 @@
 
 	piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0;
 	if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name))
-		return -EBUSY;
+		return -ENODEV;
 
 	if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) {
 		dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index 276a046..b4a55d4 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -369,9 +369,8 @@
 		goto err;
 
 	snprintf(smbus_cmi->adapter.name, sizeof(smbus_cmi->adapter.name),
-		"SMBus CMI adapter %s (%s)",
-		acpi_device_name(device),
-		acpi_device_uid(device));
+		"SMBus CMI adapter %s",
+		acpi_device_name(device));
 	smbus_cmi->adapter.owner = THIS_MODULE;
 	smbus_cmi->adapter.algo = &acpi_smbus_cmi_algorithm;
 	smbus_cmi->adapter.algo_data = smbus_cmi;
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8295885..1649963 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -280,7 +280,7 @@
 
 	retval = acpi_check_resource_conflict(&dev->resource[SIS96x_BAR]);
 	if (retval)
-		return retval;
+		return -ENODEV;
 
 	/* Everything is happy, let's grab the memory and set things up. */
 	if (!request_region(sis96x_smbus_base, SMB_IOSIZE,
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 54d810a..e4b1543 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -365,7 +365,7 @@
 found:
 	error = acpi_check_region(vt596_smba, 8, vt596_driver.name);
 	if (error)
-		return error;
+		return -ENODEV;
 
 	if (!request_region(vt596_smba, 8, vt596_driver.name)) {
 		dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n",
diff --git a/drivers/ieee1394/dma.c b/drivers/ieee1394/dma.c
index 1aba8c1..8e7e334 100644
--- a/drivers/ieee1394/dma.c
+++ b/drivers/ieee1394/dma.c
@@ -247,7 +247,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct dma_region_vm_ops = {
+static const struct vm_operations_struct dma_region_vm_ops = {
 	.fault = dma_region_pagefault,
 };
 
diff --git a/drivers/infiniband/core/mad_rmpp.c b/drivers/infiniband/core/mad_rmpp.c
index 57a3c6f..4e0f2829 100644
--- a/drivers/infiniband/core/mad_rmpp.c
+++ b/drivers/infiniband/core/mad_rmpp.c
@@ -37,7 +37,8 @@
 enum rmpp_state {
 	RMPP_STATE_ACTIVE,
 	RMPP_STATE_TIMEOUT,
-	RMPP_STATE_COMPLETE
+	RMPP_STATE_COMPLETE,
+	RMPP_STATE_CANCELING
 };
 
 struct mad_rmpp_recv {
@@ -87,18 +88,22 @@
 
 	spin_lock_irqsave(&agent->lock, flags);
 	list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
+		if (rmpp_recv->state != RMPP_STATE_COMPLETE)
+			ib_free_recv_mad(rmpp_recv->rmpp_wc);
+		rmpp_recv->state = RMPP_STATE_CANCELING;
+	}
+	spin_unlock_irqrestore(&agent->lock, flags);
+
+	list_for_each_entry(rmpp_recv, &agent->rmpp_list, list) {
 		cancel_delayed_work(&rmpp_recv->timeout_work);
 		cancel_delayed_work(&rmpp_recv->cleanup_work);
 	}
-	spin_unlock_irqrestore(&agent->lock, flags);
 
 	flush_workqueue(agent->qp_info->port_priv->wq);
 
 	list_for_each_entry_safe(rmpp_recv, temp_rmpp_recv,
 				 &agent->rmpp_list, list) {
 		list_del(&rmpp_recv->list);
-		if (rmpp_recv->state != RMPP_STATE_COMPLETE)
-			ib_free_recv_mad(rmpp_recv->rmpp_wc);
 		destroy_rmpp_recv(rmpp_recv);
 	}
 }
@@ -260,6 +265,10 @@
 	unsigned long flags;
 
 	spin_lock_irqsave(&rmpp_recv->agent->lock, flags);
+	if (rmpp_recv->state == RMPP_STATE_CANCELING) {
+		spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
+		return;
+	}
 	list_del(&rmpp_recv->list);
 	spin_unlock_irqrestore(&rmpp_recv->agent->lock, flags);
 	destroy_rmpp_recv(rmpp_recv);
diff --git a/drivers/infiniband/core/ucm.c b/drivers/infiniband/core/ucm.c
index 51bd966..f504c9b 100644
--- a/drivers/infiniband/core/ucm.c
+++ b/drivers/infiniband/core/ucm.c
@@ -38,6 +38,7 @@
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/file.h>
 #include <linux/mount.h>
 #include <linux/cdev.h>
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 8c46f22..7de0296 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -44,6 +44,7 @@
 #include <linux/mutex.h>
 #include <linux/kref.h>
 #include <linux/compat.h>
+#include <linux/sched.h>
 #include <linux/semaphore.h>
 
 #include <asm/uaccess.h>
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index d3fff9e..aec0fbd 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -40,6 +40,7 @@
 #include <linux/err.h>
 #include <linux/fs.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/file.h>
 #include <linux/mount.h>
 #include <linux/cdev.h>
diff --git a/drivers/infiniband/hw/ehca/ehca_uverbs.c b/drivers/infiniband/hw/ehca/ehca_uverbs.c
index 3cb688d..f1565ca 100644
--- a/drivers/infiniband/hw/ehca/ehca_uverbs.c
+++ b/drivers/infiniband/hw/ehca/ehca_uverbs.c
@@ -95,7 +95,7 @@
 		     vma->vm_start, vma->vm_end, *count);
 }
 
-static struct vm_operations_struct vm_ops = {
+static const struct vm_operations_struct vm_ops = {
 	.open =	ehca_mm_open,
 	.close = ehca_mm_close,
 };
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 38a2870..40dbe54 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -1151,7 +1151,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct ipath_file_vm_ops = {
+static const struct vm_operations_struct ipath_file_vm_ops = {
 	.fault = ipath_file_vma_fault,
 };
 
diff --git a/drivers/infiniband/hw/ipath/ipath_mmap.c b/drivers/infiniband/hw/ipath/ipath_mmap.c
index fa830e2..b28865f 100644
--- a/drivers/infiniband/hw/ipath/ipath_mmap.c
+++ b/drivers/infiniband/hw/ipath/ipath_mmap.c
@@ -74,7 +74,7 @@
 	kref_put(&ip->ref, ipath_release_mmap_info);
 }
 
-static struct vm_operations_struct ipath_vm_ops = {
+static const struct vm_operations_struct ipath_vm_ops = {
 	.open =     ipath_vma_open,
 	.close =    ipath_vma_close,
 };
diff --git a/drivers/infiniband/hw/mthca/mthca_catas.c b/drivers/infiniband/hw/mthca/mthca_catas.c
index 056b2a4..0aa0110 100644
--- a/drivers/infiniband/hw/mthca/mthca_catas.c
+++ b/drivers/infiniband/hw/mthca/mthca_catas.c
@@ -68,11 +68,16 @@
 	spin_unlock_irq(&catas_lock);
 
 	list_for_each_entry_safe(dev, tmpdev, &tlist, catas_err.list) {
+		struct pci_dev *pdev = dev->pdev;
 		ret = __mthca_restart_one(dev->pdev);
+		/* 'dev' now is not valid */
 		if (ret)
-			mthca_err(dev, "Reset failed (%d)\n", ret);
-		else
-			mthca_dbg(dev, "Reset succeeded\n");
+			printk(KERN_ERR "mthca %s: Reset failed (%d)\n",
+			       pci_name(pdev), ret);
+		else {
+			struct mthca_dev *d = pci_get_drvdata(pdev);
+			mthca_dbg(d, "Reset succeeded\n");
+		}
 	}
 
 	mutex_unlock(&mthca_device_mutex);
diff --git a/drivers/infiniband/hw/nes/nes_nic.c b/drivers/infiniband/hw/nes/nes_nic.c
index 538e409..de18fdf 100644
--- a/drivers/infiniband/hw/nes/nes_nic.c
+++ b/drivers/infiniband/hw/nes/nes_nic.c
@@ -1080,11 +1080,14 @@
 
 
 /**
- * nes_netdev_get_stats_count
+ * nes_netdev_get_sset_count
  */
-static int nes_netdev_get_stats_count(struct net_device *netdev)
+static int nes_netdev_get_sset_count(struct net_device *netdev, int stringset)
 {
-	return NES_ETHTOOL_STAT_COUNT;
+	if (stringset == ETH_SS_STATS)
+		return NES_ETHTOOL_STAT_COUNT;
+	else
+		return -EINVAL;
 }
 
 
@@ -1264,7 +1267,6 @@
 	sprintf(drvinfo->fw_version, "%u.%u", nesadapter->firmware_version>>16,
 				nesadapter->firmware_version & 0x000000ff);
 	strcpy(drvinfo->version, DRV_VERSION);
-	drvinfo->n_stats = nes_netdev_get_stats_count(netdev);
 	drvinfo->testinfo_len = 0;
 	drvinfo->eedump_len = 0;
 	drvinfo->regdump_len = 0;
@@ -1516,7 +1518,7 @@
 	.get_rx_csum = nes_netdev_get_rx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.get_strings = nes_netdev_get_strings,
-	.get_stats_count = nes_netdev_get_stats_count,
+	.get_sset_count = nes_netdev_get_sset_count,
 	.get_ethtool_stats = nes_netdev_get_ethtool_stats,
 	.get_drvinfo = nes_netdev_get_drvinfo,
 	.get_coalesce = nes_netdev_get_coalesce,
@@ -1566,7 +1568,6 @@
 	.ndo_set_mac_address	= nes_netdev_set_mac_address,
 	.ndo_set_multicast_list = nes_netdev_set_multicast_list,
 	.ndo_change_mtu		= nes_netdev_change_mtu,
-	.ndo_set_mac_address 	= eth_mac_addr,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_vlan_rx_register 	= nes_netdev_vlan_rx_register,
 };
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index 25874fc..8763c1e 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -362,12 +362,19 @@
 {
 	struct ipoib_dev_priv *priv = container_of(work, struct ipoib_dev_priv,
 						   carrier_on_task);
+	struct ib_port_attr attr;
 
 	/*
 	 * Take rtnl_lock to avoid racing with ipoib_stop() and
 	 * turning the carrier back on while a device is being
 	 * removed.
 	 */
+	if (ib_query_port(priv->ca, priv->port, &attr) ||
+	    attr.state != IB_PORT_ACTIVE) {
+		ipoib_dbg(priv, "Keeping carrier off until IB port is active\n");
+		return;
+	}
+
 	rtnl_lock();
 	netif_carrier_on(priv->dev);
 	rtnl_unlock();
diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c
index 1148140..dee6706 100644
--- a/drivers/input/evdev.c
+++ b/drivers/input/evdev.c
@@ -13,6 +13,7 @@
 #define EVDEV_BUFFER_SIZE	64
 
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/input/input.c b/drivers/input/input.c
index e828aab..c6f88eb 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -17,6 +17,7 @@
 #include <linux/random.h>
 #include <linux/major.h>
 #include <linux/proc_fs.h>
+#include <linux/sched.h>
 #include <linux/seq_file.h>
 #include <linux/poll.h>
 #include <linux/device.h>
@@ -1273,6 +1274,7 @@
 		}						\
 	} while (0)
 
+#ifdef CONFIG_PM
 static void input_dev_reset(struct input_dev *dev, bool activate)
 {
 	if (!dev->event)
@@ -1287,7 +1289,6 @@
 	}
 }
 
-#ifdef CONFIG_PM
 static int input_dev_suspend(struct device *dev)
 {
 	struct input_dev *input_dev = to_input_dev(dev);
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 901b252..b1bd6dd 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -18,6 +18,7 @@
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/major.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/mm.h>
 #include <linux/miscdevice.h>
diff --git a/drivers/input/misc/uinput.c b/drivers/input/misc/uinput.c
index c5a49ab..d3f5724 100644
--- a/drivers/input/misc/uinput.c
+++ b/drivers/input/misc/uinput.c
@@ -30,6 +30,7 @@
  *		- first public version
  */
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
diff --git a/drivers/input/mousedev.c b/drivers/input/mousedev.c
index 966b886..a13d80f 100644
--- a/drivers/input/mousedev.c
+++ b/drivers/input/mousedev.c
@@ -13,6 +13,7 @@
 #define MOUSEDEV_MINORS		32
 #define MOUSEDEV_MIX		31
 
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/smp_lock.h>
 #include <linux/poll.h>
diff --git a/drivers/isdn/divert/divert_procfs.c b/drivers/isdn/divert/divert_procfs.c
index 8b256a6..3697c40 100644
--- a/drivers/isdn/divert/divert_procfs.c
+++ b/drivers/isdn/divert/divert_procfs.c
@@ -16,6 +16,7 @@
 #else
 #include <linux/fs.h>
 #endif
+#include <linux/sched.h>
 #include <linux/isdnif.h>
 #include <net/net_namespace.h>
 #include "isdn_divert.h"
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig
index 18ab865..dcefedc 100644
--- a/drivers/isdn/gigaset/Kconfig
+++ b/drivers/isdn/gigaset/Kconfig
@@ -1,6 +1,5 @@
 menuconfig ISDN_DRV_GIGASET
 	tristate "Siemens Gigaset support"
-	depends on ISDN_I4L
 	select CRC_CCITT
 	select BITREVERSE
 	help
@@ -11,9 +10,33 @@
 	  If you have one of these devices, say M here and for at least
 	  one of the connection specific parts that follow.
 	  This will build a module called "gigaset".
+	  Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
+	  as a module, you have to build this driver as a module too,
+	  otherwise the Gigaset device won't show up as an ISDN device.
 
 if ISDN_DRV_GIGASET
 
+config GIGASET_CAPI
+	bool "Gigaset CAPI support (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
+	default ISDN_I4L='n'
+	help
+	  Build the Gigaset driver as a CAPI 2.0 driver interfacing with
+	  the Kernel CAPI subsystem. To use it with the old ISDN4Linux
+	  subsystem you'll have to enable the capidrv glue driver.
+	  (select ISDN_CAPI_CAPIDRV.)
+	  Say N to build the old native ISDN4Linux variant.
+
+config GIGASET_I4L
+	bool
+	depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
+	default !GIGASET_CAPI
+
+config GIGASET_DUMMYLL
+	bool
+	default !GIGASET_CAPI&&!GIGASET_I4L
+
 config GIGASET_BASE
 	tristate "Gigaset base station support"
 	depends on USB
diff --git a/drivers/isdn/gigaset/Makefile b/drivers/isdn/gigaset/Makefile
index e9d3189..c453b72 100644
--- a/drivers/isdn/gigaset/Makefile
+++ b/drivers/isdn/gigaset/Makefile
@@ -1,4 +1,7 @@
-gigaset-y := common.o interface.o proc.o ev-layer.o i4l.o asyncdata.o
+gigaset-y := common.o interface.o proc.o ev-layer.o asyncdata.o
+gigaset-$(CONFIG_GIGASET_CAPI) += capi.o
+gigaset-$(CONFIG_GIGASET_I4L) += i4l.o
+gigaset-$(CONFIG_GIGASET_DUMMYLL) += dummyll.o
 usb_gigaset-y := usb-gigaset.o
 ser_gigaset-y := ser-gigaset.o
 bas_gigaset-y := bas-gigaset.o isocdata.o
diff --git a/drivers/isdn/gigaset/asyncdata.c b/drivers/isdn/gigaset/asyncdata.c
index 44a58e6..ccb2a7b 100644
--- a/drivers/isdn/gigaset/asyncdata.c
+++ b/drivers/isdn/gigaset/asyncdata.c
@@ -19,7 +19,7 @@
 
 /* check if byte must be stuffed/escaped
  * I'm not sure which data should be encoded.
- * Therefore I will go the hard way and decode every value
+ * Therefore I will go the hard way and encode every value
  * less than 0x20, the flag sequence and the control escape char.
  */
 static inline int muststuff(unsigned char c)
@@ -35,303 +35,383 @@
 
 /* == data input =========================================================== */
 
-/* process a block of received bytes in command mode (modem response)
+/* process a block of received bytes in command mode
+ * (mstate != MS_LOCKED && (inputstate & INS_command))
+ * Append received bytes to the command response buffer and forward them
+ * line by line to the response handler. Exit whenever a mode/state change
+ * might have occurred.
  * Return value:
  *	number of processed bytes
  */
-static inline int cmd_loop(unsigned char c, unsigned char *src, int numbytes,
-			   struct inbuf_t *inbuf)
+static unsigned cmd_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
+	unsigned char *src = inbuf->data + inbuf->head;
 	struct cardstate *cs = inbuf->cs;
-	unsigned cbytes      = cs->cbytes;
-	int inputstate = inbuf->inputstate;
-	int startbytes = numbytes;
+	unsigned cbytes = cs->cbytes;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	for (;;) {
-		cs->respdata[cbytes] = c;
-		if (c == 10 || c == 13) {
-			gig_dbg(DEBUG_TRANSCMD, "%s: End of Command (%d Bytes)",
-				__func__, cbytes);
-			cs->cbytes = cbytes;
-			gigaset_handle_modem_response(cs); /* can change
-							      cs->dle */
-			cbytes = 0;
+	while (procbytes < numbytes) {
+		c = *src++;
+		procbytes++;
 
-			if (cs->dle &&
-			    !(inputstate & INS_DLE_command)) {
-				inputstate &= ~INS_command;
+		switch (c) {
+		case '\n':
+			if (cbytes == 0 && cs->respdata[0] == '\r') {
+				/* collapse LF with preceding CR */
+				cs->respdata[0] = 0;
 				break;
 			}
-		} else {
-			/* advance in line buffer, checking for overflow */
-			if (cbytes < MAX_RESP_SIZE - 1)
-				cbytes++;
-			else
-				dev_warn(cs->dev, "response too large\n");
-		}
+			/* --v-- fall through --v-- */
+		case '\r':
+			/* end of message line, pass to response handler */
+			gig_dbg(DEBUG_TRANSCMD, "%s: End of Message (%d Bytes)",
+				__func__, cbytes);
+			if (cbytes >= MAX_RESP_SIZE) {
+				dev_warn(cs->dev, "response too large (%d)\n",
+					 cbytes);
+				cbytes = MAX_RESP_SIZE;
+			}
+			cs->cbytes = cbytes;
+			gigaset_handle_modem_response(cs);
+			cbytes = 0;
 
-		if (!numbytes)
-			break;
-		c = *src++;
-		--numbytes;
-		if (c == DLE_FLAG &&
-		    (cs->dle || inputstate & INS_DLE_command)) {
-			inputstate |= INS_DLE_char;
-			break;
+			/* store EOL byte for CRLF collapsing */
+			cs->respdata[0] = c;
+
+			/* cs->dle may have changed */
+			if (cs->dle && !(inbuf->inputstate & INS_DLE_command))
+				inbuf->inputstate &= ~INS_command;
+
+			/* return for reevaluating state */
+			goto exit;
+
+		case DLE_FLAG:
+			if (inbuf->inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inbuf->inputstate &= ~INS_DLE_char;
+			} else if (cs->dle ||
+				   (inbuf->inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inbuf->inputstate |= INS_DLE_char;
+				goto exit;
+			}
+			/* quoted or not in DLE mode: treat as regular data */
+			/* --v-- fall through --v-- */
+		default:
+			/* append to line buffer if possible */
+			if (cbytes < MAX_RESP_SIZE)
+				cs->respdata[cbytes] = c;
+			cbytes++;
 		}
 	}
-
+exit:
 	cs->cbytes = cbytes;
-	inbuf->inputstate = inputstate;
-
-	return startbytes - numbytes;
+	return procbytes;
 }
 
-/* process a block of received bytes in lock mode (tty i/f)
+/* process a block of received bytes in lock mode
+ * All received bytes are passed unmodified to the tty i/f.
  * Return value:
  *	number of processed bytes
  */
-static inline int lock_loop(unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned lock_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
-	struct cardstate *cs = inbuf->cs;
+	unsigned char *src = inbuf->data + inbuf->head;
 
-	gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response",
-			   numbytes, src);
-	gigaset_if_receive(cs, src, numbytes);
-
+	gigaset_dbg_buffer(DEBUG_LOCKCMD, "received response", numbytes, src);
+	gigaset_if_receive(inbuf->cs, src, numbytes);
 	return numbytes;
 }
 
+/* set up next receive skb for data mode
+ */
+static void new_rcv_skb(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	unsigned short hw_hdr_len = cs->hw_hdr_len;
+
+	if (bcs->ignore) {
+		bcs->skb = NULL;
+		return;
+	}
+
+	bcs->skb = dev_alloc_skb(SBUFSIZE + hw_hdr_len);
+	if (bcs->skb == NULL) {
+		dev_warn(cs->dev, "could not allocate new skb\n");
+		return;
+	}
+	skb_reserve(bcs->skb, hw_hdr_len);
+}
+
 /* process a block of received bytes in HDLC data mode
+ * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 == L2_HDLC)
  * Collect HDLC frames, undoing byte stuffing and watching for DLE escapes.
  * When a frame is complete, check the FCS and pass valid frames to the LL.
  * If DLE is encountered, return immediately to let the caller handle it.
  * Return value:
  *	number of processed bytes
- *	numbytes (all bytes processed) on error --FIXME
  */
-static inline int hdlc_loop(unsigned char c, unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned hdlc_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
 	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = inbuf->bcs;
+	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
 	__u16 fcs = bcs->fcs;
 	struct sk_buff *skb = bcs->skb;
-	unsigned char error;
-	struct sk_buff *compskb;
-	int startbytes = numbytes;
-	int l;
+	unsigned char *src = inbuf->data + inbuf->head;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	if (unlikely(inputstate & INS_byte_stuff)) {
+	if (inputstate & INS_byte_stuff) {
+		if (!numbytes)
+			return 0;
 		inputstate &= ~INS_byte_stuff;
 		goto byte_stuff;
 	}
-	for (;;) {
-		if (unlikely(c == PPP_ESCAPE)) {
-			if (unlikely(!numbytes)) {
-				inputstate |= INS_byte_stuff;
+
+	while (procbytes < numbytes) {
+		c = *src++;
+		procbytes++;
+		if (c == DLE_FLAG) {
+			if (inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inputstate &= ~INS_DLE_char;
+			} else if (cs->dle || (inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inputstate |= INS_DLE_char;
 				break;
 			}
-			c = *src++;
-			--numbytes;
-			if (unlikely(c == DLE_FLAG &&
-				     (cs->dle ||
-				      inbuf->inputstate & INS_DLE_command))) {
-				inbuf->inputstate |= INS_DLE_char;
+		}
+
+		if (c == PPP_ESCAPE) {
+			/* byte stuffing indicator: pull in next byte */
+			if (procbytes >= numbytes) {
+				/* end of buffer, save for later processing */
 				inputstate |= INS_byte_stuff;
 				break;
 			}
 byte_stuff:
+			c = *src++;
+			procbytes++;
+			if (c == DLE_FLAG) {
+				if (inputstate & INS_DLE_char) {
+					/* quoted DLE: clear quote flag */
+					inputstate &= ~INS_DLE_char;
+				} else if (cs->dle ||
+					   (inputstate & INS_DLE_command)) {
+					/* DLE escape, pass up for handling */
+					inputstate |=
+						INS_DLE_char | INS_byte_stuff;
+					break;
+				}
+			}
 			c ^= PPP_TRANS;
-			if (unlikely(!muststuff(c)))
+#ifdef CONFIG_GIGASET_DEBUG
+			if (!muststuff(c))
 				gig_dbg(DEBUG_HDLC, "byte stuffed: 0x%02x", c);
-		} else if (unlikely(c == PPP_FLAG)) {
-			if (unlikely(inputstate & INS_skip_frame)) {
-#ifdef CONFIG_GIGASET_DEBUG
-				if (!(inputstate & INS_have_data)) { /* 7E 7E */
-					++bcs->emptycount;
-				} else
-					gig_dbg(DEBUG_HDLC,
-					    "7e----------------------------");
 #endif
-
-				/* end of frame */
-				error = 1;
-				gigaset_rcv_error(NULL, cs, bcs);
-			} else if (!(inputstate & INS_have_data)) { /* 7E 7E */
-#ifdef CONFIG_GIGASET_DEBUG
-				++bcs->emptycount;
-#endif
-				break;
-			} else {
+		} else if (c == PPP_FLAG) {
+			/* end of frame: process content if any */
+			if (inputstate & INS_have_data) {
 				gig_dbg(DEBUG_HDLC,
 					"7e----------------------------");
 
-				/* end of frame */
-				error = 0;
-
-				if (unlikely(fcs != PPP_GOODFCS)) {
+				/* check and pass received frame */
+				if (!skb) {
+					/* skipped frame */
+					gigaset_isdn_rcv_err(bcs);
+				} else if (skb->len < 2) {
+					/* frame too short for FCS */
+					dev_warn(cs->dev,
+						 "short frame (%d)\n",
+						 skb->len);
+					gigaset_isdn_rcv_err(bcs);
+					dev_kfree_skb_any(skb);
+				} else if (fcs != PPP_GOODFCS) {
+					/* frame check error */
 					dev_err(cs->dev,
 				"Checksum failed, %u bytes corrupted!\n",
 						skb->len);
-					compskb = NULL;
-					gigaset_rcv_error(compskb, cs, bcs);
-					error = 1;
+					gigaset_isdn_rcv_err(bcs);
+					dev_kfree_skb_any(skb);
 				} else {
-					if (likely((l = skb->len) > 2)) {
-						skb->tail -= 2;
-						skb->len -= 2;
-					} else {
-						dev_kfree_skb(skb);
-						skb = NULL;
-						inputstate |= INS_skip_frame;
-						if (l == 1) {
-							dev_err(cs->dev,
-						  "invalid packet size (1)!\n");
-							error = 1;
-							gigaset_rcv_error(NULL,
-								cs, bcs);
-						}
-					}
-					if (likely(!(error ||
-						     (inputstate &
-						      INS_skip_frame)))) {
-						gigaset_rcv_skb(skb, cs, bcs);
-					}
+					/* good frame */
+					__skb_trim(skb, skb->len - 2);
+					gigaset_skb_rcvd(bcs, skb);
+				}
+
+				/* prepare reception of next frame */
+				inputstate &= ~INS_have_data;
+				new_rcv_skb(bcs);
+				skb = bcs->skb;
+			} else {
+				/* empty frame (7E 7E) */
+#ifdef CONFIG_GIGASET_DEBUG
+				++bcs->emptycount;
+#endif
+				if (!skb) {
+					/* skipped (?) */
+					gigaset_isdn_rcv_err(bcs);
+					new_rcv_skb(bcs);
+					skb = bcs->skb;
 				}
 			}
 
-			if (unlikely(error))
-				if (skb)
-					dev_kfree_skb(skb);
-
 			fcs = PPP_INITFCS;
-			inputstate &= ~(INS_have_data | INS_skip_frame);
-			if (unlikely(bcs->ignore)) {
-				inputstate |= INS_skip_frame;
-				skb = NULL;
-			} else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)) {
-				skb_reserve(skb, HW_HDR_LEN);
-			} else {
-				dev_warn(cs->dev,
-					 "could not allocate new skb\n");
-				inputstate |= INS_skip_frame;
-			}
-
-			break;
-		} else if (unlikely(muststuff(c))) {
+			continue;
+#ifdef CONFIG_GIGASET_DEBUG
+		} else if (muststuff(c)) {
 			/* Should not happen. Possible after ZDLE=1<CR><LF>. */
 			gig_dbg(DEBUG_HDLC, "not byte stuffed: 0x%02x", c);
+#endif
 		}
 
-		/* add character */
-
+		/* regular data byte, append to skb */
 #ifdef CONFIG_GIGASET_DEBUG
-		if (unlikely(!(inputstate & INS_have_data))) {
+		if (!(inputstate & INS_have_data)) {
 			gig_dbg(DEBUG_HDLC, "7e (%d x) ================",
 				bcs->emptycount);
 			bcs->emptycount = 0;
 		}
 #endif
-
 		inputstate |= INS_have_data;
-
-		if (likely(!(inputstate & INS_skip_frame))) {
-			if (unlikely(skb->len == SBUFSIZE)) {
+		if (skb) {
+			if (skb->len == SBUFSIZE) {
 				dev_warn(cs->dev, "received packet too long\n");
 				dev_kfree_skb_any(skb);
-				skb = NULL;
-				inputstate |= INS_skip_frame;
-				break;
+				/* skip remainder of packet */
+				bcs->skb = skb = NULL;
+			} else {
+				*__skb_put(skb, 1) = c;
+				fcs = crc_ccitt_byte(fcs, c);
 			}
-			*__skb_put(skb, 1) = c;
-			fcs = crc_ccitt_byte(fcs, c);
-		}
-
-		if (unlikely(!numbytes))
-			break;
-		c = *src++;
-		--numbytes;
-		if (unlikely(c == DLE_FLAG &&
-			     (cs->dle ||
-			      inbuf->inputstate & INS_DLE_command))) {
-			inbuf->inputstate |= INS_DLE_char;
-			break;
 		}
 	}
+
 	bcs->inputstate = inputstate;
 	bcs->fcs = fcs;
-	bcs->skb = skb;
-	return startbytes - numbytes;
+	return procbytes;
 }
 
 /* process a block of received bytes in transparent data mode
+ * (mstate != MS_LOCKED && !(inputstate & INS_command) && proto2 != L2_HDLC)
  * Invert bytes, undoing byte stuffing and watching for DLE escapes.
  * If DLE is encountered, return immediately to let the caller handle it.
  * Return value:
  *	number of processed bytes
- *	numbytes (all bytes processed) on error --FIXME
  */
-static inline int iraw_loop(unsigned char c, unsigned char *src, int numbytes,
-			    struct inbuf_t *inbuf)
+static unsigned iraw_loop(unsigned numbytes, struct inbuf_t *inbuf)
 {
 	struct cardstate *cs = inbuf->cs;
-	struct bc_state *bcs = inbuf->bcs;
+	struct bc_state *bcs = cs->bcs;
 	int inputstate = bcs->inputstate;
 	struct sk_buff *skb = bcs->skb;
-	int startbytes = numbytes;
+	unsigned char *src = inbuf->data + inbuf->head;
+	unsigned procbytes = 0;
+	unsigned char c;
 
-	for (;;) {
-		/* add character */
-		inputstate |= INS_have_data;
+	if (!skb) {
+		/* skip this block */
+		new_rcv_skb(bcs);
+		return numbytes;
+	}
 
-		if (likely(!(inputstate & INS_skip_frame))) {
-			if (unlikely(skb->len == SBUFSIZE)) {
-				//FIXME just pass skb up and allocate a new one
-				dev_warn(cs->dev, "received packet too long\n");
-				dev_kfree_skb_any(skb);
-				skb = NULL;
-				inputstate |= INS_skip_frame;
+	while (procbytes < numbytes && skb->len < SBUFSIZE) {
+		c = *src++;
+		procbytes++;
+
+		if (c == DLE_FLAG) {
+			if (inputstate & INS_DLE_char) {
+				/* quoted DLE: clear quote flag */
+				inputstate &= ~INS_DLE_char;
+			} else if (cs->dle || (inputstate & INS_DLE_command)) {
+				/* DLE escape, pass up for handling */
+				inputstate |= INS_DLE_char;
 				break;
 			}
-			*__skb_put(skb, 1) = bitrev8(c);
 		}
 
-		if (unlikely(!numbytes))
-			break;
-		c = *src++;
-		--numbytes;
-		if (unlikely(c == DLE_FLAG &&
-			     (cs->dle ||
-			      inbuf->inputstate & INS_DLE_command))) {
-			inbuf->inputstate |= INS_DLE_char;
-			break;
-		}
+		/* regular data byte: append to current skb */
+		inputstate |= INS_have_data;
+		*__skb_put(skb, 1) = bitrev8(c);
 	}
 
 	/* pass data up */
-	if (likely(inputstate & INS_have_data)) {
-		if (likely(!(inputstate & INS_skip_frame))) {
-			gigaset_rcv_skb(skb, cs, bcs);
-		}
-		inputstate &= ~(INS_have_data | INS_skip_frame);
-		if (unlikely(bcs->ignore)) {
-			inputstate |= INS_skip_frame;
-			skb = NULL;
-		} else if (likely((skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN))
-				  != NULL)) {
-			skb_reserve(skb, HW_HDR_LEN);
-		} else {
-			dev_warn(cs->dev, "could not allocate new skb\n");
-			inputstate |= INS_skip_frame;
-		}
+	if (inputstate & INS_have_data) {
+		gigaset_skb_rcvd(bcs, skb);
+		inputstate &= ~INS_have_data;
+		new_rcv_skb(bcs);
 	}
 
 	bcs->inputstate = inputstate;
-	bcs->skb = skb;
-	return startbytes - numbytes;
+	return procbytes;
+}
+
+/* process DLE escapes
+ * Called whenever a DLE sequence might be encountered in the input stream.
+ * Either processes the entire DLE sequence or, if that isn't possible,
+ * notes the fact that an initial DLE has been received in the INS_DLE_char
+ * inputstate flag and resumes processing of the sequence on the next call.
+ */
+static void handle_dle(struct inbuf_t *inbuf)
+{
+	struct cardstate *cs = inbuf->cs;
+
+	if (cs->mstate == MS_LOCKED)
+		return;		/* no DLE processing in lock mode */
+
+	if (!(inbuf->inputstate & INS_DLE_char)) {
+		/* no DLE pending */
+		if (inbuf->data[inbuf->head] == DLE_FLAG &&
+		    (cs->dle || inbuf->inputstate & INS_DLE_command)) {
+			/* start of DLE sequence */
+			inbuf->head++;
+			if (inbuf->head == inbuf->tail ||
+			    inbuf->head == RBUFSIZE) {
+				/* end of buffer, save for later processing */
+				inbuf->inputstate |= INS_DLE_char;
+				return;
+			}
+		} else {
+			/* regular data byte */
+			return;
+		}
+	}
+
+	/* consume pending DLE */
+	inbuf->inputstate &= ~INS_DLE_char;
+
+	switch (inbuf->data[inbuf->head]) {
+	case 'X':	/* begin of event message */
+		if (inbuf->inputstate & INS_command)
+			dev_notice(cs->dev,
+				   "received <DLE>X in command mode\n");
+		inbuf->inputstate |= INS_command | INS_DLE_command;
+		inbuf->head++;	/* byte consumed */
+		break;
+	case '.':	/* end of event message */
+		if (!(inbuf->inputstate & INS_DLE_command))
+			dev_notice(cs->dev,
+				   "received <DLE>. without <DLE>X\n");
+		inbuf->inputstate &= ~INS_DLE_command;
+		/* return to data mode if in DLE mode */
+		if (cs->dle)
+			inbuf->inputstate &= ~INS_command;
+		inbuf->head++;	/* byte consumed */
+		break;
+	case DLE_FLAG:	/* DLE in data stream */
+		/* mark as quoted */
+		inbuf->inputstate |= INS_DLE_char;
+		if (!(cs->dle || inbuf->inputstate & INS_DLE_command))
+			dev_notice(cs->dev,
+				   "received <DLE><DLE> not in DLE mode\n");
+		break;	/* quoted byte left in buffer */
+	default:
+		dev_notice(cs->dev, "received <DLE><%02x>\n",
+			   inbuf->data[inbuf->head]);
+		/* quoted byte left in buffer */
+	}
 }
 
 /**
@@ -345,94 +425,39 @@
  */
 void gigaset_m10x_input(struct inbuf_t *inbuf)
 {
-	struct cardstate *cs;
-	unsigned tail, head, numbytes;
-	unsigned char *src, c;
-	int procbytes;
+	struct cardstate *cs = inbuf->cs;
+	unsigned numbytes, procbytes;
 
-	head = inbuf->head;
-	tail = inbuf->tail;
-	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", head, tail);
+	gig_dbg(DEBUG_INTR, "buffer state: %u -> %u", inbuf->head, inbuf->tail);
 
-	if (head != tail) {
-		cs = inbuf->cs;
-		src = inbuf->data + head;
-		numbytes = (head > tail ? RBUFSIZE : tail) - head;
+	while (inbuf->head != inbuf->tail) {
+		/* check for DLE escape */
+		handle_dle(inbuf);
+
+		/* process a contiguous block of bytes */
+		numbytes = (inbuf->head > inbuf->tail ?
+			    RBUFSIZE : inbuf->tail) - inbuf->head;
 		gig_dbg(DEBUG_INTR, "processing %u bytes", numbytes);
+		/*
+		 * numbytes may be 0 if handle_dle() ate the last byte.
+		 * This does no harm, *_loop() will just return 0 immediately.
+		 */
 
-		while (numbytes) {
-			if (cs->mstate == MS_LOCKED) {
-				procbytes = lock_loop(src, numbytes, inbuf);
-				src += procbytes;
-				numbytes -= procbytes;
-			} else {
-				c = *src++;
-				--numbytes;
-				if (c == DLE_FLAG && (cs->dle ||
-				    inbuf->inputstate & INS_DLE_command)) {
-					if (!(inbuf->inputstate & INS_DLE_char)) {
-						inbuf->inputstate |= INS_DLE_char;
-						goto nextbyte;
-					}
-					/* <DLE> <DLE> => <DLE> in data stream */
-					inbuf->inputstate &= ~INS_DLE_char;
-				}
+		if (cs->mstate == MS_LOCKED)
+			procbytes = lock_loop(numbytes, inbuf);
+		else if (inbuf->inputstate & INS_command)
+			procbytes = cmd_loop(numbytes, inbuf);
+		else if (cs->bcs->proto2 == L2_HDLC)
+			procbytes = hdlc_loop(numbytes, inbuf);
+		else
+			procbytes = iraw_loop(numbytes, inbuf);
+		inbuf->head += procbytes;
 
-				if (!(inbuf->inputstate & INS_DLE_char)) {
+		/* check for buffer wraparound */
+		if (inbuf->head >= RBUFSIZE)
+			inbuf->head = 0;
 
-					/* FIXME use function pointers?  */
-					if (inbuf->inputstate & INS_command)
-						procbytes = cmd_loop(c, src, numbytes, inbuf);
-					else if (inbuf->bcs->proto2 == ISDN_PROTO_L2_HDLC)
-						procbytes = hdlc_loop(c, src, numbytes, inbuf);
-					else
-						procbytes = iraw_loop(c, src, numbytes, inbuf);
-
-					src += procbytes;
-					numbytes -= procbytes;
-				} else {  /* DLE char */
-					inbuf->inputstate &= ~INS_DLE_char;
-					switch (c) {
-					case 'X': /*begin of command*/
-						if (inbuf->inputstate & INS_command)
-							dev_warn(cs->dev,
-					"received <DLE> 'X' in command mode\n");
-						inbuf->inputstate |=
-							INS_command | INS_DLE_command;
-						break;
-					case '.': /*end of command*/
-						if (!(inbuf->inputstate & INS_command))
-							dev_warn(cs->dev,
-					"received <DLE> '.' in hdlc mode\n");
-						inbuf->inputstate &= cs->dle ?
-							~(INS_DLE_command|INS_command)
-							: ~INS_DLE_command;
-						break;
-					//case DLE_FLAG: /*DLE_FLAG in data stream*/ /* schon oben behandelt! */
-					default:
-						dev_err(cs->dev,
-						      "received 0x10 0x%02x!\n",
-							(int) c);
-						/* FIXME: reset driver?? */
-					}
-				}
-			}
-nextbyte:
-			if (!numbytes) {
-				/* end of buffer, check for wrap */
-				if (head > tail) {
-					head = 0;
-					src = inbuf->data;
-					numbytes = tail;
-				} else {
-					head = tail;
-					break;
-				}
-			}
-		}
-
-		gig_dbg(DEBUG_INTR, "setting head to %u", head);
-		inbuf->head = head;
+		gig_dbg(DEBUG_INTR, "head set to %u", inbuf->head);
 	}
 }
 EXPORT_SYMBOL_GPL(gigaset_m10x_input);
@@ -440,16 +465,16 @@
 
 /* == data output ========================================================== */
 
-/* Encoding of a PPP packet into an octet stuffed HDLC frame
- * with FCS, opening and closing flags.
+/*
+ * Encode a data packet into an octet stuffed HDLC frame with FCS,
+ * opening and closing flags, preserving headroom data.
  * parameters:
- *	skb	skb containing original packet (freed upon return)
- *	head	number of headroom bytes to allocate in result skb
- *	tail	number of tailroom bytes to allocate in result skb
+ *	skb		skb containing original packet (freed upon return)
  * Return value:
  *	pointer to newly allocated skb containing the result frame
+ *	and the original link layer header, NULL on error
  */
-static struct sk_buff *HDLC_Encode(struct sk_buff *skb, int head, int tail)
+static struct sk_buff *HDLC_Encode(struct sk_buff *skb)
 {
 	struct sk_buff *hdlc_skb;
 	__u16 fcs;
@@ -471,16 +496,19 @@
 
 	/* size of new buffer: original size + number of stuffing bytes
 	 * + 2 bytes FCS + 2 stuffing bytes for FCS (if needed) + 2 flag bytes
+	 * + room for link layer header
 	 */
-	hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + tail + head);
+	hdlc_skb = dev_alloc_skb(skb->len + stuf_cnt + 6 + skb->mac_len);
 	if (!hdlc_skb) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NULL;
 	}
-	skb_reserve(hdlc_skb, head);
 
-	/* Copy acknowledge request into new skb */
-	memcpy(hdlc_skb->head, skb->head, 2);
+	/* Copy link layer header into new skb */
+	skb_reset_mac_header(hdlc_skb);
+	skb_reserve(hdlc_skb, skb->mac_len);
+	memcpy(skb_mac_header(hdlc_skb), skb_mac_header(skb), skb->mac_len);
+	hdlc_skb->mac_len = skb->mac_len;
 
 	/* Add flag sequence in front of everything.. */
 	*(skb_put(hdlc_skb, 1)) = PPP_FLAG;
@@ -511,33 +539,42 @@
 
 	*(skb_put(hdlc_skb, 1)) = PPP_FLAG;
 
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return hdlc_skb;
 }
 
-/* Encoding of a raw packet into an octet stuffed bit inverted frame
+/*
+ * Encode a data packet into an octet stuffed raw bit inverted frame,
+ * preserving headroom data.
  * parameters:
- *	skb	skb containing original packet (freed upon return)
- *	head	number of headroom bytes to allocate in result skb
- *	tail	number of tailroom bytes to allocate in result skb
+ *	skb		skb containing original packet (freed upon return)
  * Return value:
  *	pointer to newly allocated skb containing the result frame
+ *	and the original link layer header, NULL on error
  */
-static struct sk_buff *iraw_encode(struct sk_buff *skb, int head, int tail)
+static struct sk_buff *iraw_encode(struct sk_buff *skb)
 {
 	struct sk_buff *iraw_skb;
 	unsigned char c;
 	unsigned char *cp;
 	int len;
 
-	/* worst case: every byte must be stuffed */
-	iraw_skb = dev_alloc_skb(2*skb->len + tail + head);
+	/* size of new buffer (worst case = every byte must be stuffed):
+	 * 2 * original size + room for link layer header
+	 */
+	iraw_skb = dev_alloc_skb(2*skb->len + skb->mac_len);
 	if (!iraw_skb) {
-		dev_kfree_skb(skb);
+		dev_kfree_skb_any(skb);
 		return NULL;
 	}
-	skb_reserve(iraw_skb, head);
 
+	/* copy link layer header into new skb */
+	skb_reset_mac_header(iraw_skb);
+	skb_reserve(iraw_skb, skb->mac_len);
+	memcpy(skb_mac_header(iraw_skb), skb_mac_header(skb), skb->mac_len);
+	iraw_skb->mac_len = skb->mac_len;
+
+	/* copy and stuff data */
 	cp = skb->data;
 	len = skb->len;
 	while (len--) {
@@ -546,7 +583,7 @@
 			*(skb_put(iraw_skb, 1)) = c;
 		*(skb_put(iraw_skb, 1)) = c;
 	}
-	dev_kfree_skb(skb);
+	dev_kfree_skb_any(skb);
 	return iraw_skb;
 }
 
@@ -555,8 +592,10 @@
  * @bcs:	B channel descriptor structure.
  * @skb:	data to send.
  *
- * Called by i4l.c to encode and queue an skb for sending, and start
+ * Called by LL to encode and queue an skb for sending, and start
  * transmission if necessary.
+ * Once the payload data has been transmitted completely, gigaset_skb_sent()
+ * will be called with the skb's link layer header preserved.
  *
  * Return value:
  *	number of bytes accepted for sending (skb->len) if ok,
@@ -564,24 +603,25 @@
  */
 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb)
 {
+	struct cardstate *cs = bcs->cs;
 	unsigned len = skb->len;
 	unsigned long flags;
 
-	if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
-		skb = HDLC_Encode(skb, HW_HDR_LEN, 0);
+	if (bcs->proto2 == L2_HDLC)
+		skb = HDLC_Encode(skb);
 	else
-		skb = iraw_encode(skb, HW_HDR_LEN, 0);
+		skb = iraw_encode(skb);
 	if (!skb) {
-		dev_err(bcs->cs->dev,
+		dev_err(cs->dev,
 			"unable to allocate memory for encoding!\n");
 		return -ENOMEM;
 	}
 
 	skb_queue_tail(&bcs->squeue, skb);
-	spin_lock_irqsave(&bcs->cs->lock, flags);
-	if (bcs->cs->connected)
-		tasklet_schedule(&bcs->cs->write_tasklet);
-	spin_unlock_irqrestore(&bcs->cs->lock, flags);
+	spin_lock_irqsave(&cs->lock, flags);
+	if (cs->connected)
+		tasklet_schedule(&cs->write_tasklet);
+	spin_unlock_irqrestore(&cs->lock, flags);
 
 	return len;	/* ok so far */
 }
diff --git a/drivers/isdn/gigaset/bas-gigaset.c b/drivers/isdn/gigaset/bas-gigaset.c
index 5ed1d99..9fd19db 100644
--- a/drivers/isdn/gigaset/bas-gigaset.c
+++ b/drivers/isdn/gigaset/bas-gigaset.c
@@ -57,7 +57,7 @@
 #define USB_SX353_PRODUCT_ID    0x0022
 
 /* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table[] = {
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3070_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_3075_PRODUCT_ID) },
 	{ USB_DEVICE(USB_GIGA_VENDOR_ID, USB_SX303_PRODUCT_ID) },
@@ -137,7 +137,7 @@
 #define BS_RESETTING	0x200	/* waiting for HD_RESET_INTERRUPT_PIPE_ACK */
 
 
-static struct gigaset_driver *driver = NULL;
+static struct gigaset_driver *driver;
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver gigaset_usb_driver = {
@@ -601,11 +601,12 @@
 	ucs->dr_cmd_in.wLength = cpu_to_le16(ucs->rcvbuf_size);
 	usb_fill_control_urb(ucs->urb_cmd_in, ucs->udev,
 			     usb_rcvctrlpipe(ucs->udev, 0),
-			     (unsigned char*) & ucs->dr_cmd_in,
+			     (unsigned char *) &ucs->dr_cmd_in,
 			     ucs->rcvbuf, ucs->rcvbuf_size,
 			     read_ctrl_callback, cs->inbuf);
 
-	if ((ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC)) != 0) {
+	ret = usb_submit_urb(ucs->urb_cmd_in, GFP_ATOMIC);
+	if (ret != 0) {
 		update_basstate(ucs, 0, BS_ATRDPEND);
 		dev_err(cs->dev, "could not submit HD_READ_ATMESSAGE: %s\n",
 			get_usb_rcmsg(ret));
@@ -652,13 +653,11 @@
 		return;
 	case -ENODEV:			/* device removed */
 	case -ESHUTDOWN:		/* device shut down */
-		//FIXME use this as disconnect indicator?
 		gig_dbg(DEBUG_USBREQ, "%s: device disconnected", __func__);
 		return;
 	default:		/* severe trouble */
 		dev_warn(cs->dev, "interrupt read: %s\n",
 			 get_usb_statmsg(status));
-		//FIXME corrective action? resubmission always ok?
 		goto resubmit;
 	}
 
@@ -742,7 +741,8 @@
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf_size = 0;
 		}
-		if ((ucs->rcvbuf = kmalloc(l, GFP_ATOMIC)) == NULL) {
+		ucs->rcvbuf = kmalloc(l, GFP_ATOMIC);
+		if (ucs->rcvbuf == NULL) {
 			spin_unlock_irqrestore(&cs->lock, flags);
 			dev_err(cs->dev, "out of memory receiving AT data\n");
 			error_reset(cs);
@@ -750,12 +750,12 @@
 		}
 		ucs->rcvbuf_size = l;
 		ucs->retry_cmd_in = 0;
-		if ((rc = atread_submit(cs, BAS_TIMEOUT)) < 0) {
+		rc = atread_submit(cs, BAS_TIMEOUT);
+		if (rc < 0) {
 			kfree(ucs->rcvbuf);
 			ucs->rcvbuf = NULL;
 			ucs->rcvbuf_size = 0;
 			if (rc != -ENODEV) {
-				//FIXME corrective action?
 				spin_unlock_irqrestore(&cs->lock, flags);
 				error_reset(cs);
 				break;
@@ -911,7 +911,7 @@
 	int rc;
 
 	/* initialize L2 reception */
-	if (bcs->proto2 == ISDN_PROTO_L2_HDLC)
+	if (bcs->proto2 == L2_HDLC)
 		bcs->inputstate |= INS_flag_hunt;
 
 	/* submit all isochronous input URBs */
@@ -940,7 +940,8 @@
 		}
 
 		dump_urb(DEBUG_ISO, "Initial isoc read", urb);
-		if ((rc = usb_submit_urb(urb, GFP_ATOMIC)) != 0)
+		rc = usb_submit_urb(urb, GFP_ATOMIC);
+		if (rc != 0)
 			goto error;
 	}
 
@@ -1045,7 +1046,8 @@
 
 		/* compute frame length according to flow control */
 		ifd->length = BAS_NORMFRAME;
-		if ((corrbytes = atomic_read(&ubc->corrbytes)) != 0) {
+		corrbytes = atomic_read(&ubc->corrbytes);
+		if (corrbytes != 0) {
 			gig_dbg(DEBUG_ISO, "%s: corrbytes=%d",
 				__func__, corrbytes);
 			if (corrbytes > BAS_HIGHFRAME - BAS_NORMFRAME)
@@ -1064,7 +1066,7 @@
 					"%s: buffer busy at frame %d",
 					__func__, nframe);
 				/* tasklet will be restarted from
-				   gigaset_send_skb() */
+				   gigaset_isoc_send_skb() */
 			} else {
 				dev_err(ucx->bcs->cs->dev,
 					"%s: buffer error %d at frame %d\n",
@@ -1284,7 +1286,8 @@
 	for (;;) {
 		/* retrieve URB */
 		spin_lock_irqsave(&ubc->isoinlock, flags);
-		if (!(urb = ubc->isoindone)) {
+		urb = ubc->isoindone;
+		if (!urb) {
 			spin_unlock_irqrestore(&ubc->isoinlock, flags);
 			return;
 		}
@@ -1371,7 +1374,7 @@
 				 "isochronous read: %d data bytes missing\n",
 				 totleft);
 
-	error:
+error:
 		/* URB processed, resubmit */
 		for (frame = 0; frame < BAS_NUMFRAMES; frame++) {
 			urb->iso_frame_desc[frame].status = 0;
@@ -1568,7 +1571,7 @@
 	ucs->dr_ctrl.wLength = 0;
 	usb_fill_control_urb(ucs->urb_ctrl, ucs->udev,
 			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char*) &ucs->dr_ctrl, NULL, 0,
+			     (unsigned char *) &ucs->dr_ctrl, NULL, 0,
 			     write_ctrl_callback, ucs);
 	ucs->retry_ctrl = 0;
 	ret = usb_submit_urb(ucs->urb_ctrl, GFP_ATOMIC);
@@ -1621,7 +1624,8 @@
 		return -EHOSTUNREACH;
 	}
 
-	if ((ret = starturbs(bcs)) < 0) {
+	ret = starturbs(bcs);
+	if (ret < 0) {
 		dev_err(cs->dev,
 			"could not start isochronous I/O for channel B%d: %s\n",
 			bcs->channel + 1,
@@ -1633,7 +1637,8 @@
 	}
 
 	req = bcs->channel ? HD_OPEN_B2CHANNEL : HD_OPEN_B1CHANNEL;
-	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0) {
+	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
+	if (ret < 0) {
 		dev_err(cs->dev, "could not open channel B%d\n",
 			bcs->channel + 1);
 		stopurbs(bcs->hw.bas);
@@ -1677,7 +1682,8 @@
 
 	/* channel running: tell device to close it */
 	req = bcs->channel ? HD_CLOSE_B2CHANNEL : HD_CLOSE_B1CHANNEL;
-	if ((ret = req_submit(bcs, req, 0, BAS_TIMEOUT)) < 0)
+	ret = req_submit(bcs, req, 0, BAS_TIMEOUT);
+	if (ret < 0)
 		dev_err(cs->dev, "closing channel B%d failed\n",
 			bcs->channel + 1);
 
@@ -1703,10 +1709,12 @@
 	gig_dbg(DEBUG_TRANSCMD|DEBUG_LOCKCMD,
 		"write_command: sent %u bytes, %u left",
 		cs->curlen, cs->cmdbytes);
-	if ((cs->cmdbuf = cb->next) != NULL) {
+	if (cb->next != NULL) {
+		cs->cmdbuf = cb->next;
 		cs->cmdbuf->prev = NULL;
 		cs->curlen = cs->cmdbuf->len;
 	} else {
+		cs->cmdbuf = NULL;
 		cs->lastcmdbuf = NULL;
 		cs->curlen = 0;
 	}
@@ -1833,7 +1841,7 @@
 	ucs->dr_cmd_out.wLength = cpu_to_le16(len);
 	usb_fill_control_urb(ucs->urb_cmd_out, ucs->udev,
 			     usb_sndctrlpipe(ucs->udev, 0),
-			     (unsigned char*) &ucs->dr_cmd_out, buf, len,
+			     (unsigned char *) &ucs->dr_cmd_out, buf, len,
 			     write_command_callback, cs);
 	rc = usb_submit_urb(ucs->urb_cmd_out, GFP_ATOMIC);
 	if (unlikely(rc)) {
@@ -1953,7 +1961,8 @@
 
 	if (len > IF_WRITEBUF)
 		len = IF_WRITEBUF;
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		rc = -ENOMEM;
 		goto notqueued;
@@ -2100,7 +2109,8 @@
 	}
 	ubc->isooutdone = ubc->isooutfree = ubc->isooutovfl = NULL;
 	ubc->numsub = 0;
-	if (!(ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL))) {
+	ubc->isooutbuf = kmalloc(sizeof(struct isowbuf_t), GFP_KERNEL);
+	if (!ubc->isooutbuf) {
 		pr_err("out of memory\n");
 		kfree(ubc);
 		bcs->hw.bas = NULL;
@@ -2252,7 +2262,8 @@
 		gig_dbg(DEBUG_ANY,
 			"%s: wrong alternate setting %d - trying to switch",
 			__func__, hostif->desc.bAlternateSetting);
-		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3) < 0) {
+		if (usb_set_interface(udev, hostif->desc.bInterfaceNumber, 3)
+		    < 0) {
 			dev_warn(&udev->dev, "usb_set_interface failed, "
 				 "device %d interface %d altsetting %d\n",
 				 udev->devnum, hostif->desc.bInterfaceNumber,
@@ -2321,14 +2332,16 @@
 					(endpoint->bEndpointAddress) & 0x0f),
 			 ucs->int_in_buf, IP_MSGSIZE, read_int_callback, cs,
 			 endpoint->bInterval);
-	if ((rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL)) != 0) {
+	rc = usb_submit_urb(ucs->urb_int_in, GFP_KERNEL);
+	if (rc != 0) {
 		dev_err(cs->dev, "could not submit interrupt URB: %s\n",
 			get_usb_rcmsg(rc));
 		goto error;
 	}
 
 	/* tell the device that the driver is ready */
-	if ((rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0)) != 0)
+	rc = req_submit(cs->bcs, HD_DEVICE_INIT_ACK, 0, 0);
+	if (rc != 0)
 		goto error;
 
 	/* tell common part that the device is ready */
@@ -2524,9 +2537,10 @@
 	int result;
 
 	/* allocate memory for our driver state and intialize it */
-	if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				       GIGASET_MODULENAME, GIGASET_DEVNAME,
-				       &gigops, THIS_MODULE)) == NULL)
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+				    GIGASET_MODULENAME, GIGASET_DEVNAME,
+				    &gigops, THIS_MODULE);
+	if (driver == NULL)
 		goto error;
 
 	/* register this driver with the USB subsystem */
diff --git a/drivers/isdn/gigaset/capi.c b/drivers/isdn/gigaset/capi.c
new file mode 100644
index 0000000..3f5cd06
--- /dev/null
+++ b/drivers/isdn/gigaset/capi.c
@@ -0,0 +1,2292 @@
+/*
+ * Kernel CAPI interface for the Gigaset driver
+ *
+ * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
+ *
+ * =====================================================================
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+#include <linux/ctype.h>
+#include <linux/isdn/capilli.h>
+#include <linux/isdn/capicmd.h>
+#include <linux/isdn/capiutil.h>
+
+/* missing from kernelcapi.h */
+#define CapiNcpiNotSupportedByProtocol	0x0001
+#define CapiFlagsNotSupportedByProtocol	0x0002
+#define CapiAlertAlreadySent		0x0003
+#define CapiFacilitySpecificFunctionNotSupported	0x3011
+
+/* missing from capicmd.h */
+#define CAPI_CONNECT_IND_BASELEN	(CAPI_MSG_BASELEN+4+2+8*1)
+#define CAPI_CONNECT_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN+4+3*1)
+#define CAPI_CONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN+4+1)
+#define CAPI_CONNECT_B3_ACTIVE_IND_BASELEN	(CAPI_MSG_BASELEN+4+1)
+#define CAPI_DATA_B3_REQ_LEN64		(CAPI_MSG_BASELEN+4+4+2+2+2+8)
+#define CAPI_DATA_B3_CONF_LEN		(CAPI_MSG_BASELEN+4+2+2)
+#define CAPI_DISCONNECT_IND_LEN		(CAPI_MSG_BASELEN+4+2)
+#define CAPI_DISCONNECT_B3_IND_BASELEN	(CAPI_MSG_BASELEN+4+2+1)
+#define CAPI_FACILITY_CONF_BASELEN	(CAPI_MSG_BASELEN+4+2+2+1)
+/* most _CONF messages contain only Controller/PLCI/NCCI and Info parameters */
+#define CAPI_STDCONF_LEN		(CAPI_MSG_BASELEN+4+2)
+
+#define CAPI_FACILITY_HANDSET	0x0000
+#define CAPI_FACILITY_DTMF	0x0001
+#define CAPI_FACILITY_V42BIS	0x0002
+#define CAPI_FACILITY_SUPPSVC	0x0003
+#define CAPI_FACILITY_WAKEUP	0x0004
+#define CAPI_FACILITY_LI	0x0005
+
+#define CAPI_SUPPSVC_GETSUPPORTED	0x0000
+
+/* missing from capiutil.h */
+#define CAPIMSG_PLCI_PART(m)	CAPIMSG_U8(m, 9)
+#define CAPIMSG_NCCI_PART(m)	CAPIMSG_U16(m, 10)
+#define CAPIMSG_HANDLE_REQ(m)	CAPIMSG_U16(m, 18) /* DATA_B3_REQ/_IND only! */
+#define CAPIMSG_FLAGS(m)	CAPIMSG_U16(m, 20)
+#define CAPIMSG_SETCONTROLLER(m, contr)	capimsg_setu8(m, 8, contr)
+#define CAPIMSG_SETPLCI_PART(m, plci)	capimsg_setu8(m, 9, plci)
+#define CAPIMSG_SETNCCI_PART(m, ncci)	capimsg_setu16(m, 10, ncci)
+#define CAPIMSG_SETFLAGS(m, flags)	capimsg_setu16(m, 20, flags)
+
+/* parameters with differing location in DATA_B3_CONF/_RESP: */
+#define CAPIMSG_SETHANDLE_CONF(m, handle)	capimsg_setu16(m, 12, handle)
+#define	CAPIMSG_SETINFO_CONF(m, info)		capimsg_setu16(m, 14, info)
+
+/* Flags (DATA_B3_REQ/_IND) */
+#define CAPI_FLAGS_DELIVERY_CONFIRMATION	0x04
+#define CAPI_FLAGS_RESERVED			(~0x1f)
+
+/* buffer sizes */
+#define MAX_BC_OCTETS 11
+#define MAX_HLC_OCTETS 3
+#define MAX_NUMBER_DIGITS 20
+#define MAX_FMT_IE_LEN 20
+
+/* values for gigaset_capi_appl.connected */
+#define APCONN_NONE	0	/* inactive/listening */
+#define APCONN_SETUP	1	/* connecting */
+#define APCONN_ACTIVE	2	/* B channel up */
+
+/* registered application data structure */
+struct gigaset_capi_appl {
+	struct list_head ctrlist;
+	struct gigaset_capi_appl *bcnext;
+	u16 id;
+	u16 nextMessageNumber;
+	u32 listenInfoMask;
+	u32 listenCIPmask;
+	int connected;
+};
+
+/* CAPI specific controller data structure */
+struct gigaset_capi_ctr {
+	struct capi_ctr ctr;
+	struct list_head appls;
+	struct sk_buff_head sendqueue;
+	atomic_t sendqlen;
+	/* two _cmsg structures possibly used concurrently: */
+	_cmsg hcmsg;	/* for message composition triggered from hardware */
+	_cmsg acmsg;	/* for dissection of messages sent from application */
+	u8 bc_buf[MAX_BC_OCTETS+1];
+	u8 hlc_buf[MAX_HLC_OCTETS+1];
+	u8 cgpty_buf[MAX_NUMBER_DIGITS+3];
+	u8 cdpty_buf[MAX_NUMBER_DIGITS+2];
+};
+
+/* CIP Value table (from CAPI 2.0 standard, ch. 6.1) */
+static struct {
+	u8 *bc;
+	u8 *hlc;
+} cip2bchlc[] = {
+	[1] = { "8090A3", NULL },
+		/* Speech (A-law) */
+	[2] = { "8890", NULL },
+		/* Unrestricted digital information */
+	[3] = { "8990", NULL },
+		/* Restricted digital information */
+	[4] = { "9090A3", NULL },
+		/* 3,1 kHz audio (A-law) */
+	[5] = { "9190", NULL },
+		/* 7 kHz audio */
+	[6] = { "9890", NULL },
+		/* Video */
+	[7] = { "88C0C6E6", NULL },
+		/* Packet mode */
+	[8] = { "8890218F", NULL },
+		/* 56 kbit/s rate adaptation */
+	[9] = { "9190A5", NULL },
+		/* Unrestricted digital information with tones/announcements */
+	[16] = { "8090A3", "9181" },
+		/* Telephony */
+	[17] = { "9090A3", "9184" },
+		/* Group 2/3 facsimile */
+	[18] = { "8890", "91A1" },
+		/* Group 4 facsimile Class 1 */
+	[19] = { "8890", "91A4" },
+		/* Teletex service basic and mixed mode
+		   and Group 4 facsimile service Classes II and III */
+	[20] = { "8890", "91A8" },
+		/* Teletex service basic and processable mode */
+	[21] = { "8890", "91B1" },
+		/* Teletex service basic mode */
+	[22] = { "8890", "91B2" },
+		/* International interworking for Videotex */
+	[23] = { "8890", "91B5" },
+		/* Telex */
+	[24] = { "8890", "91B8" },
+		/* Message Handling Systems in accordance with X.400 */
+	[25] = { "8890", "91C1" },
+		/* OSI application in accordance with X.200 */
+	[26] = { "9190A5", "9181" },
+		/* 7 kHz telephony */
+	[27] = { "9190A5", "916001" },
+		/* Video telephony, first connection */
+	[28] = { "8890", "916002" },
+		/* Video telephony, second connection */
+};
+
+/*
+ * helper functions
+ * ================
+ */
+
+/*
+ * emit unsupported parameter warning
+ */
+static inline void ignore_cstruct_param(struct cardstate *cs, _cstruct param,
+				       char *msgname, char *paramname)
+{
+	if (param && *param)
+		dev_warn(cs->dev, "%s: ignoring unsupported parameter: %s\n",
+			 msgname, paramname);
+}
+
+/*
+ * check for legal hex digit
+ */
+static inline int ishexdigit(char c)
+{
+	if (c >= '0' && c <= '9')
+		return 1;
+	if (c >= 'A' && c <= 'F')
+		return 1;
+	if (c >= 'a' && c <= 'f')
+		return 1;
+	return 0;
+}
+
+/*
+ * convert hex to binary
+ */
+static inline u8 hex2bin(char c)
+{
+	int result = c & 0x0f;
+	if (c & 0x40)
+		result += 9;
+	return result;
+}
+
+/*
+ * convert an IE from Gigaset hex string to ETSI binary representation
+ * including length byte
+ * return value: result length, -1 on error
+ */
+static int encode_ie(char *in, u8 *out, int maxlen)
+{
+	int l = 0;
+	while (*in) {
+		if (!ishexdigit(in[0]) || !ishexdigit(in[1]) || l >= maxlen)
+			return -1;
+		out[++l] = (hex2bin(in[0]) << 4) + hex2bin(in[1]);
+		in += 2;
+	}
+	out[0] = l;
+	return l;
+}
+
+/*
+ * convert an IE from ETSI binary representation including length byte
+ * to Gigaset hex string
+ */
+static void decode_ie(u8 *in, char *out)
+{
+	int i = *in;
+	while (i-- > 0) {
+		/* ToDo: conversion to upper case necessary? */
+		*out++ = toupper(hex_asc_hi(*++in));
+		*out++ = toupper(hex_asc_lo(*in));
+	}
+}
+
+/*
+ * retrieve application data structure for an application ID
+ */
+static inline struct gigaset_capi_appl *
+get_appl(struct gigaset_capi_ctr *iif, u16 appl)
+{
+	struct gigaset_capi_appl *ap;
+
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (ap->id == appl)
+			return ap;
+	return NULL;
+}
+
+/*
+ * dump CAPI message to kernel messages for debugging
+ */
+static inline void dump_cmsg(enum debuglevel level, const char *tag, _cmsg *p)
+{
+#ifdef CONFIG_GIGASET_DEBUG
+	_cdebbuf *cdb;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
+	cdb = capi_cmsg2str(p);
+	if (cdb) {
+		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId, cdb->buf);
+		cdebbuf_free(cdb);
+	} else {
+		gig_dbg(level, "%s: [%d] %s", tag, p->ApplId,
+			capi_cmd2str(p->Command, p->Subcommand));
+	}
+#endif
+}
+
+static inline void dump_rawmsg(enum debuglevel level, const char *tag,
+			       unsigned char *data)
+{
+#ifdef CONFIG_GIGASET_DEBUG
+	char *dbgline;
+	int i, l;
+
+	if (!(gigaset_debuglevel & level))
+		return;
+
+	l = CAPIMSG_LEN(data);
+	if (l < 12) {
+		gig_dbg(level, "%s: ??? LEN=%04d", tag, l);
+		return;
+	}
+	gig_dbg(level, "%s: 0x%02x:0x%02x: ID=%03d #0x%04x LEN=%04d NCCI=0x%x",
+		tag, CAPIMSG_COMMAND(data), CAPIMSG_SUBCOMMAND(data),
+		CAPIMSG_APPID(data), CAPIMSG_MSGID(data), l,
+		CAPIMSG_CONTROL(data));
+	l -= 12;
+	dbgline = kmalloc(3*l, GFP_ATOMIC);
+	if (!dbgline)
+		return;
+	for (i = 0; i < l; i++) {
+		dbgline[3*i] = hex_asc_hi(data[12+i]);
+		dbgline[3*i+1] = hex_asc_lo(data[12+i]);
+		dbgline[3*i+2] = ' ';
+	}
+	dbgline[3*l-1] = '\0';
+	gig_dbg(level, "  %s", dbgline);
+	kfree(dbgline);
+	if (CAPIMSG_COMMAND(data) == CAPI_DATA_B3 &&
+	    (CAPIMSG_SUBCOMMAND(data) == CAPI_REQ ||
+	     CAPIMSG_SUBCOMMAND(data) == CAPI_IND) &&
+	    CAPIMSG_DATALEN(data) > 0) {
+		l = CAPIMSG_DATALEN(data);
+		dbgline = kmalloc(3*l, GFP_ATOMIC);
+		if (!dbgline)
+			return;
+		data += CAPIMSG_LEN(data);
+		for (i = 0; i < l; i++) {
+			dbgline[3*i] = hex_asc_hi(data[i]);
+			dbgline[3*i+1] = hex_asc_lo(data[i]);
+			dbgline[3*i+2] = ' ';
+		}
+		dbgline[3*l-1] = '\0';
+		gig_dbg(level, "  %s", dbgline);
+		kfree(dbgline);
+	}
+#endif
+}
+
+/*
+ * format CAPI IE as string
+ */
+
+static const char *format_ie(const char *ie)
+{
+	static char result[3*MAX_FMT_IE_LEN];
+	int len, count;
+	char *pout = result;
+
+	if (!ie)
+		return "NULL";
+
+	count = len = ie[0];
+	if (count > MAX_FMT_IE_LEN)
+		count = MAX_FMT_IE_LEN-1;
+	while (count--) {
+		*pout++ = hex_asc_hi(*++ie);
+		*pout++ = hex_asc_lo(*ie);
+		*pout++ = ' ';
+	}
+	if (len > MAX_FMT_IE_LEN) {
+		*pout++ = '.';
+		*pout++ = '.';
+		*pout++ = '.';
+	}
+	*--pout = 0;
+	return result;
+}
+
+
+/*
+ * driver interface functions
+ * ==========================
+ */
+
+/**
+ * gigaset_skb_sent() - acknowledge transmission of outgoing skb
+ * @bcs:	B channel descriptor structure.
+ * @skb:	sent data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when the data in a
+ * skb has been successfully sent, for signalling completion to the LL.
+ */
+void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *dskb)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	unsigned char *req = skb_mac_header(dskb);
+	struct sk_buff *cskb;
+	u16 flags;
+
+	/* update statistics */
+	++bcs->trans_up;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	/* don't send further B3 messages if disconnected */
+	if (ap->connected < APCONN_ACTIVE) {
+		gig_dbg(DEBUG_LLDATA, "disconnected, discarding ack");
+		return;
+	}
+
+	/* ToDo: honor unset "delivery confirmation" bit */
+	flags = CAPIMSG_FLAGS(req);
+
+	/* build DATA_B3_CONF message */
+	cskb = alloc_skb(CAPI_DATA_B3_CONF_LEN, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	/* frequent message, avoid _cmsg overhead */
+	CAPIMSG_SETLEN(cskb->data, CAPI_DATA_B3_CONF_LEN);
+	CAPIMSG_SETAPPID(cskb->data, ap->id);
+	CAPIMSG_SETCOMMAND(cskb->data, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(cskb->data,  CAPI_CONF);
+	CAPIMSG_SETMSGID(cskb->data, CAPIMSG_MSGID(req));
+	CAPIMSG_SETCONTROLLER(cskb->data, iif->ctr.cnr);
+	CAPIMSG_SETPLCI_PART(cskb->data, bcs->channel + 1);
+	CAPIMSG_SETNCCI_PART(cskb->data, 1);
+	CAPIMSG_SETHANDLE_CONF(cskb->data, CAPIMSG_HANDLE_REQ(req));
+	if (flags & ~CAPI_FLAGS_DELIVERY_CONFIRMATION)
+		CAPIMSG_SETINFO_CONF(cskb->data,
+				     CapiFlagsNotSupportedByProtocol);
+	else
+		CAPIMSG_SETINFO_CONF(cskb->data, CAPI_NOERROR);
+
+	/* emit message */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_CONF", cskb->data);
+	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_sent);
+
+/**
+ * gigaset_skb_rcvd() - pass received skb to LL
+ * @bcs:	B channel descriptor structure.
+ * @skb:	received data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when user data has
+ * been successfully received, for passing to the LL.
+ * Warning: skb must not be accessed anymore!
+ */
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	int len = skb->len;
+
+	/* update statistics */
+	bcs->trans_down++;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	/* don't send further B3 messages if disconnected */
+	if (ap->connected < APCONN_ACTIVE) {
+		gig_dbg(DEBUG_LLDATA, "disconnected, discarding data");
+		dev_kfree_skb_any(skb);
+		return;
+	}
+
+	/*
+	 * prepend DATA_B3_IND message to payload
+	 * Parameters: NCCI = 1, all others 0/unused
+	 * frequent message, avoid _cmsg overhead
+	 */
+	skb_push(skb, CAPI_DATA_B3_REQ_LEN);
+	CAPIMSG_SETLEN(skb->data, CAPI_DATA_B3_REQ_LEN);
+	CAPIMSG_SETAPPID(skb->data, ap->id);
+	CAPIMSG_SETCOMMAND(skb->data, CAPI_DATA_B3);
+	CAPIMSG_SETSUBCOMMAND(skb->data,  CAPI_IND);
+	CAPIMSG_SETMSGID(skb->data, ap->nextMessageNumber++);
+	CAPIMSG_SETCONTROLLER(skb->data, iif->ctr.cnr);
+	CAPIMSG_SETPLCI_PART(skb->data, bcs->channel + 1);
+	CAPIMSG_SETNCCI_PART(skb->data, 1);
+	/* Data parameter not used */
+	CAPIMSG_SETDATALEN(skb->data, len);
+	/* Data handle parameter not used */
+	CAPIMSG_SETFLAGS(skb->data, 0);
+	/* Data64 parameter not present */
+
+	/* emit message */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_IND", skb->data);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+/**
+ * gigaset_isdn_rcv_err() - signal receive error
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when a receive error
+ * has occurred, for signalling to the LL.
+ */
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+	/* if currently ignoring packets, just count down */
+	if (bcs->ignore) {
+		bcs->ignore--;
+		return;
+	}
+
+	/* update statistics */
+	bcs->corrupted++;
+
+	/* ToDo: signal error -> LL */
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
+/**
+ * gigaset_isdn_icall() - signal incoming call
+ * @at_state:	connection state structure.
+ *
+ * Called by main module at tasklet level to notify the LL that an incoming
+ * call has been received. @at_state contains the parameters of the call.
+ *
+ * Return value: call disposition (ICALL_*)
+ */
+int gigaset_isdn_icall(struct at_state_t *at_state)
+{
+	struct cardstate *cs = at_state->cs;
+	struct bc_state *bcs = at_state->bcs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap;
+	u32 actCIPmask;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+	int i;
+
+	/*
+	 * ToDo: signal calls without a free B channel, too
+	 * (requires a u8 handle for the at_state structure that can
+	 * be stored in the PLCI and used in the CONNECT_RESP message
+	 * handler to retrieve it)
+	 */
+	if (!bcs)
+		return ICALL_IGNORE;
+
+	/* prepare CONNECT_IND message, using B channel number as PLCI */
+	capi_cmsg_header(&iif->hcmsg, 0, CAPI_CONNECT, CAPI_IND, 0,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+
+	/* minimum size, all structs empty */
+	msgsize = CAPI_CONNECT_IND_BASELEN;
+
+	/* Bearer Capability (mandatory) */
+	if (at_state->str_var[STR_ZBC]) {
+		/* pass on BC from Gigaset */
+		if (encode_ie(at_state->str_var[STR_ZBC], iif->bc_buf,
+			      MAX_BC_OCTETS) < 0) {
+			dev_warn(cs->dev, "RING ignored - bad BC %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+
+		/* look up corresponding CIP value */
+		iif->hcmsg.CIPValue = 0;	/* default if nothing found */
+		for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
+			if (cip2bchlc[i].bc != NULL &&
+			    cip2bchlc[i].hlc == NULL &&
+			    !strcmp(cip2bchlc[i].bc,
+				    at_state->str_var[STR_ZBC])) {
+				iif->hcmsg.CIPValue = i;
+				break;
+			}
+	} else {
+		/* no BC (internal call): assume CIP 1 (speech, A-law) */
+		iif->hcmsg.CIPValue = 1;
+		encode_ie(cip2bchlc[1].bc, iif->bc_buf, MAX_BC_OCTETS);
+	}
+	iif->hcmsg.BC = iif->bc_buf;
+	msgsize += iif->hcmsg.BC[0];
+
+	/* High Layer Compatibility (optional) */
+	if (at_state->str_var[STR_ZHLC]) {
+		/* pass on HLC from Gigaset */
+		if (encode_ie(at_state->str_var[STR_ZHLC], iif->hlc_buf,
+			      MAX_HLC_OCTETS) < 0) {
+			dev_warn(cs->dev, "RING ignored - bad HLC %s\n",
+				 at_state->str_var[STR_ZHLC]);
+			return ICALL_IGNORE;
+		}
+		iif->hcmsg.HLC = iif->hlc_buf;
+		msgsize += iif->hcmsg.HLC[0];
+
+		/* look up corresponding CIP value */
+		/* keep BC based CIP value if none found */
+		if (at_state->str_var[STR_ZBC])
+			for (i = 0; i < ARRAY_SIZE(cip2bchlc); i++)
+				if (cip2bchlc[i].hlc != NULL &&
+				    !strcmp(cip2bchlc[i].hlc,
+					    at_state->str_var[STR_ZHLC]) &&
+				    !strcmp(cip2bchlc[i].bc,
+					    at_state->str_var[STR_ZBC])) {
+					iif->hcmsg.CIPValue = i;
+					break;
+				}
+	}
+
+	/* Called Party Number (optional) */
+	if (at_state->str_var[STR_ZCPN]) {
+		i = strlen(at_state->str_var[STR_ZCPN]);
+		if (i > MAX_NUMBER_DIGITS) {
+			dev_warn(cs->dev, "RING ignored - bad number %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+		iif->cdpty_buf[0] = i + 1;
+		iif->cdpty_buf[1] = 0x80; /* type / numbering plan unknown */
+		memcpy(iif->cdpty_buf+2, at_state->str_var[STR_ZCPN], i);
+		iif->hcmsg.CalledPartyNumber = iif->cdpty_buf;
+		msgsize += iif->hcmsg.CalledPartyNumber[0];
+	}
+
+	/* Calling Party Number (optional) */
+	if (at_state->str_var[STR_NMBR]) {
+		i = strlen(at_state->str_var[STR_NMBR]);
+		if (i > MAX_NUMBER_DIGITS) {
+			dev_warn(cs->dev, "RING ignored - bad number %s\n",
+				 at_state->str_var[STR_ZBC]);
+			return ICALL_IGNORE;
+		}
+		iif->cgpty_buf[0] = i + 2;
+		iif->cgpty_buf[1] = 0x00; /* type / numbering plan unknown */
+		iif->cgpty_buf[2] = 0x80; /* pres. allowed, not screened */
+		memcpy(iif->cgpty_buf+3, at_state->str_var[STR_NMBR], i);
+		iif->hcmsg.CallingPartyNumber = iif->cgpty_buf;
+		msgsize += iif->hcmsg.CallingPartyNumber[0];
+	}
+
+	/* remaining parameters (not supported, always left NULL):
+	 * - CalledPartySubaddress
+	 * - CallingPartySubaddress
+	 * - AdditionalInfo
+	 *   - BChannelinformation
+	 *   - Keypadfacility
+	 *   - Useruserdata
+	 *   - Facilitydataarray
+	 */
+
+	gig_dbg(DEBUG_CMD, "icall: PLCI %x CIP %d BC %s",
+		iif->hcmsg.adr.adrPLCI, iif->hcmsg.CIPValue,
+		format_ie(iif->hcmsg.BC));
+	gig_dbg(DEBUG_CMD, "icall: HLC %s",
+		format_ie(iif->hcmsg.HLC));
+	gig_dbg(DEBUG_CMD, "icall: CgPty %s",
+		format_ie(iif->hcmsg.CallingPartyNumber));
+	gig_dbg(DEBUG_CMD, "icall: CdPty %s",
+		format_ie(iif->hcmsg.CalledPartyNumber));
+
+	/* scan application list for matching listeners */
+	bcs->ap = NULL;
+	actCIPmask = 1 | (1 << iif->hcmsg.CIPValue);
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (actCIPmask & ap->listenCIPmask) {
+			/* build CONNECT_IND message for this application */
+			iif->hcmsg.ApplId = ap->id;
+			iif->hcmsg.Messagenumber = ap->nextMessageNumber++;
+
+			skb = alloc_skb(msgsize, GFP_ATOMIC);
+			if (!skb) {
+				dev_err(cs->dev, "%s: out of memory\n",
+					__func__);
+				break;
+			}
+			capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+			dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+
+			/* add to listeners on this B channel, update state */
+			ap->bcnext = bcs->ap;
+			bcs->ap = ap;
+			bcs->chstate |= CHS_NOTIFY_LL;
+			ap->connected = APCONN_SETUP;
+
+			/* emit message */
+			capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+		}
+
+	/*
+	 * Return "accept" if any listeners.
+	 * Gigaset will send ALERTING.
+	 * There doesn't seem to be a way to avoid this.
+	 */
+	return bcs->ap ? ICALL_ACCEPT : ICALL_IGNORE;
+}
+
+/*
+ * send a DISCONNECT_IND message to an application
+ * does not sleep, clobbers the controller's hcmsg structure
+ */
+static void send_disconnect_ind(struct bc_state *bcs,
+				struct gigaset_capi_appl *ap, u16 reason)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct sk_buff *skb;
+
+	if (ap->connected == APCONN_NONE)
+		return;
+
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+	iif->hcmsg.Reason = reason;
+	skb = alloc_skb(CAPI_DISCONNECT_IND_LEN, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, CAPI_DISCONNECT_IND_LEN));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	ap->connected = APCONN_NONE;
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * send a DISCONNECT_B3_IND message to an application
+ * Parameters: NCCI = 1, NCPI empty, Reason_B3 = 0
+ * does not sleep, clobbers the controller's hcmsg structure
+ */
+static void send_disconnect_b3_ind(struct bc_state *bcs,
+				   struct gigaset_capi_appl *ap)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct sk_buff *skb;
+
+	/* nothing to do if no logical connection active */
+	if (ap->connected < APCONN_ACTIVE)
+		return;
+	ap->connected = APCONN_SETUP;
+
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
+	skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg,
+			  __skb_put(skb, CAPI_DISCONNECT_B3_IND_BASELEN));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_connD() - signal D channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the D channel
+ * connection has been established.
+ */
+void gigaset_isdn_connD(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+	if (ap->connected == APCONN_NONE) {
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+
+	/* prepare CONNECT_ACTIVE_IND message
+	 * Note: LLC not supported by device
+	 */
+	capi_cmsg_header(&iif->hcmsg, ap->id, CAPI_CONNECT_ACTIVE, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8));
+
+	/* minimum size, all structs empty */
+	msgsize = CAPI_CONNECT_ACTIVE_IND_BASELEN;
+
+	/* ToDo: set parameter: Connected number
+	 * (requires ev-layer state machine extension to collect
+	 * ZCON device reply)
+	 */
+
+	/* build and emit CONNECT_ACTIVE_IND message */
+	skb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_hupD() - signal D channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the D channel
+ * connection has been shut down.
+ */
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+	struct gigaset_capi_appl *ap;
+
+	/*
+	 * ToDo: pass on reason code reported by device
+	 * (requires ev-layer state machine extension to collect
+	 * ZCAU device reply)
+	 */
+	for (ap = bcs->ap; ap != NULL; ap = ap->bcnext) {
+		send_disconnect_b3_ind(bcs, ap);
+		send_disconnect_ind(bcs, ap, 0);
+	}
+	bcs->ap = NULL;
+}
+
+/**
+ * gigaset_isdn_connB() - signal B channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module at tasklet level to notify the LL that the B channel
+ * connection has been established.
+ */
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_ctr *iif = cs->iif;
+	struct gigaset_capi_appl *ap = bcs->ap;
+	struct sk_buff *skb;
+	unsigned int msgsize;
+	u8 command;
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+	while (ap->bcnext) {
+		/* this should never happen */
+		dev_warn(cs->dev, "%s: dropping extra application %u\n",
+			 __func__, ap->bcnext->id);
+		send_disconnect_ind(bcs, ap->bcnext,
+				    CapiCallGivenToOtherApplication);
+		ap->bcnext = ap->bcnext->bcnext;
+	}
+	if (!ap->connected) {
+		dev_warn(cs->dev, "%s: application %u not connected\n",
+			 __func__, ap->id);
+		return;
+	}
+
+	/*
+	 * emit CONNECT_B3_ACTIVE_IND if we already got CONNECT_B3_REQ;
+	 * otherwise we have to emit CONNECT_B3_IND first, and follow up with
+	 * CONNECT_B3_ACTIVE_IND in reply to CONNECT_B3_RESP
+	 * Parameters in both cases always: NCCI = 1, NCPI empty
+	 */
+	if (ap->connected >= APCONN_ACTIVE) {
+		command = CAPI_CONNECT_B3_ACTIVE;
+		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
+	} else {
+		command = CAPI_CONNECT_B3;
+		msgsize = CAPI_CONNECT_B3_IND_BASELEN;
+	}
+	capi_cmsg_header(&iif->hcmsg, ap->id, command, CAPI_IND,
+			 ap->nextMessageNumber++,
+			 iif->ctr.cnr | ((bcs->channel + 1) << 8) | (1 << 16));
+	skb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!skb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(&iif->hcmsg, __skb_put(skb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, &iif->hcmsg);
+	ap->connected = APCONN_ACTIVE;
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/**
+ * gigaset_isdn_hupB() - signal B channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+	struct cardstate *cs = bcs->cs;
+	struct gigaset_capi_appl *ap = bcs->ap;
+
+	/* ToDo: assure order of DISCONNECT_B3_IND and DISCONNECT_IND ? */
+
+	if (!ap) {
+		dev_err(cs->dev, "%s: no application\n", __func__);
+		return;
+	}
+
+	send_disconnect_b3_ind(bcs, ap);
+}
+
+/**
+ * gigaset_isdn_start() - signal device availability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is available for
+ * use.
+ */
+void gigaset_isdn_start(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+
+	/* fill profile data: manufacturer name */
+	strcpy(iif->ctr.manu, "Siemens");
+	/* CAPI and device version */
+	iif->ctr.version.majorversion = 2;		/* CAPI 2.0 */
+	iif->ctr.version.minorversion = 0;
+	/* ToDo: check/assert cs->gotfwver? */
+	iif->ctr.version.majormanuversion = cs->fwver[0];
+	iif->ctr.version.minormanuversion = cs->fwver[1];
+	/* number of B channels supported */
+	iif->ctr.profile.nbchannel = cs->channels;
+	/* global options: internal controller, supplementary services */
+	iif->ctr.profile.goptions = 0x11;
+	/* B1 protocols: 64 kbit/s HDLC or transparent */
+	iif->ctr.profile.support1 =  0x03;
+	/* B2 protocols: transparent only */
+	/* ToDo: X.75 SLP ? */
+	iif->ctr.profile.support2 =  0x02;
+	/* B3 protocols: transparent only */
+	iif->ctr.profile.support3 =  0x01;
+	/* no serial number */
+	strcpy(iif->ctr.serial, "0");
+	capi_ctr_ready(&iif->ctr);
+}
+
+/**
+ * gigaset_isdn_stop() - signal device unavailability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is no longer
+ * available for use.
+ */
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+	capi_ctr_down(&iif->ctr);
+}
+
+/*
+ * kernel CAPI callback methods
+ * ============================
+ */
+
+/*
+ * load firmware
+ */
+static int gigaset_load_firmware(struct capi_ctr *ctr, capiloaddata *data)
+{
+	struct cardstate *cs = ctr->driverdata;
+
+	/* AVM specific operation, not needed for Gigaset -- ignore */
+	dev_notice(cs->dev, "load_firmware ignored\n");
+
+	return 0;
+}
+
+/*
+ * reset (deactivate) controller
+ */
+static void gigaset_reset_ctr(struct capi_ctr *ctr)
+{
+	struct cardstate *cs = ctr->driverdata;
+
+	/* AVM specific operation, not needed for Gigaset -- ignore */
+	dev_notice(cs->dev, "reset_ctr ignored\n");
+}
+
+/*
+ * register CAPI application
+ */
+static void gigaset_register_appl(struct capi_ctr *ctr, u16 appl,
+			   capi_register_params *rp)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = ctr->driverdata;
+	struct gigaset_capi_appl *ap;
+
+	list_for_each_entry(ap, &iif->appls, ctrlist)
+		if (ap->id == appl) {
+			dev_notice(cs->dev,
+				   "application %u already registered\n", appl);
+			return;
+		}
+
+	ap = kzalloc(sizeof(*ap), GFP_KERNEL);
+	if (!ap) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	ap->id = appl;
+
+	list_add(&ap->ctrlist, &iif->appls);
+}
+
+/*
+ * release CAPI application
+ */
+static void gigaset_release_appl(struct capi_ctr *ctr, u16 appl)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = iif->ctr.driverdata;
+	struct gigaset_capi_appl *ap, *tmp;
+
+	list_for_each_entry_safe(ap, tmp, &iif->appls, ctrlist)
+		if (ap->id == appl) {
+			if (ap->connected != APCONN_NONE) {
+				dev_err(cs->dev,
+					"%s: application %u still connected\n",
+					__func__, ap->id);
+				/* ToDo: clear active connection */
+			}
+			list_del(&ap->ctrlist);
+			kfree(ap);
+		}
+
+}
+
+/*
+ * =====================================================================
+ * outgoing CAPI message handler
+ * =====================================================================
+ */
+
+/*
+ * helper function: emit reply message with given Info value
+ */
+static void send_conf(struct gigaset_capi_ctr *iif,
+		      struct gigaset_capi_appl *ap,
+		      struct sk_buff *skb,
+		      u16 info)
+{
+	/*
+	 * _CONF replies always only have NCCI and Info parameters
+	 * so they'll fit into the _REQ message skb
+	 */
+	capi_cmsg_answer(&iif->acmsg);
+	iif->acmsg.Info = info;
+	capi_cmsg2message(&iif->acmsg, skb->data);
+	__skb_trim(skb, CAPI_STDCONF_LEN);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * process FACILITY_REQ message
+ */
+static void do_facility_req(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct sk_buff *cskb;
+	u8 *pparam;
+	unsigned int msgsize = CAPI_FACILITY_CONF_BASELEN;
+	u16 function, info;
+	static u8 confparam[10];	/* max. 9 octets + length byte */
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/*
+	 * Facility Request Parameter is not decoded by capi_message2cmsg()
+	 * encoding depends on Facility Selector
+	 */
+	switch (cmsg->FacilitySelector) {
+	case CAPI_FACILITY_DTMF:	/* ToDo */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* DTMF information: Unknown DTMF request */
+		capimsg_setu16(confparam, 1, 2);
+		break;
+
+	case CAPI_FACILITY_V42BIS:	/* not supported */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* V.42 bis information: not available */
+		capimsg_setu16(confparam, 1, 1);
+		break;
+
+	case CAPI_FACILITY_SUPPSVC:
+		/* decode Function parameter */
+		pparam = cmsg->FacilityRequestParameter;
+		if (pparam == NULL || *pparam < 2) {
+			dev_notice(cs->dev, "%s: %s missing\n", "FACILITY_REQ",
+				   "Facility Request Parameter");
+			send_conf(iif, ap, skb, CapiIllMessageParmCoding);
+			return;
+		}
+		function = CAPIMSG_U16(pparam, 1);
+		switch (function) {
+		case CAPI_SUPPSVC_GETSUPPORTED:
+			info = CapiSuccess;
+			/* Supplementary Service specific parameter */
+			confparam[3] = 6;	/* length */
+			/* Supplementary services info: Success */
+			capimsg_setu16(confparam, 4, CapiSuccess);
+			/* Supported Services: none */
+			capimsg_setu32(confparam, 6, 0);
+			break;
+		/* ToDo: add supported services */
+		default:
+			info = CapiFacilitySpecificFunctionNotSupported;
+			/* Supplementary Service specific parameter */
+			confparam[3] = 2;	/* length */
+			/* Supplementary services info: not supported */
+			capimsg_setu16(confparam, 4,
+				       CapiSupplementaryServiceNotSupported);
+		}
+
+		/* Facility confirmation parameter */
+		confparam[0] = confparam[3] + 3;	/* total length */
+		/* Function: copy from _REQ message */
+		capimsg_setu16(confparam, 1, function);
+		/* Supplementary Service specific parameter already set above */
+		break;
+
+	case CAPI_FACILITY_WAKEUP:	/* ToDo */
+		info = CapiFacilityNotSupported;
+		confparam[0] = 2;	/* length */
+		/* Number of accepted awake request parameters: 0 */
+		capimsg_setu16(confparam, 1, 0);
+		break;
+
+	default:
+		info = CapiFacilityNotSupported;
+		confparam[0] = 0;	/* empty struct */
+	}
+
+	/* send FACILITY_CONF with given Info and confirmation parameter */
+	capi_cmsg_answer(cmsg);
+	cmsg->Info = info;
+	cmsg->FacilityConfirmationParameter = confparam;
+	msgsize += confparam[0];	/* length */
+	cskb = alloc_skb(msgsize, GFP_ATOMIC);
+	if (!cskb) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		return;
+	}
+	capi_cmsg2message(cmsg, __skb_put(cskb, msgsize));
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, cskb);
+}
+
+
+/*
+ * process LISTEN_REQ message
+ * just store the masks in the application data structure
+ */
+static void do_listen_req(struct gigaset_capi_ctr *iif,
+			  struct gigaset_capi_appl *ap,
+			  struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+
+	/* store listening parameters */
+	ap->listenInfoMask = iif->acmsg.InfoMask;
+	ap->listenCIPmask = iif->acmsg.CIPmask;
+	send_conf(iif, ap, skb, CapiSuccess);
+}
+
+/*
+ * process ALERT_REQ message
+ * nothing to do, Gigaset always alerts anyway
+ */
+static void do_alert_req(struct gigaset_capi_ctr *iif,
+			 struct gigaset_capi_appl *ap,
+			 struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb, CapiAlertAlreadySent);
+}
+
+/*
+ * process CONNECT_REQ message
+ * allocate a B channel, prepare dial commands, queue a DIAL event,
+ * emit CONNECT_CONF reply
+ */
+static void do_connect_req(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	char **commands;
+	char *s;
+	u8 *pp;
+	int i, l;
+	u16 info;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* get free B channel & construct PLCI */
+	bcs = gigaset_get_free_channel(cs);
+	if (!bcs) {
+		dev_notice(cs->dev, "%s: no B channel available\n",
+			   "CONNECT_REQ");
+		send_conf(iif, ap, skb, CapiNoPlciAvailable);
+		return;
+	}
+	ap->bcnext = NULL;
+	bcs->ap = ap;
+	cmsg->adr.adrPLCI |= (bcs->channel + 1) << 8;
+
+	/* build command table */
+	commands = kzalloc(AT_NUM*(sizeof *commands), GFP_KERNEL);
+	if (!commands)
+		goto oom;
+
+	/* encode parameter: Called party number */
+	pp = cmsg->CalledPartyNumber;
+	if (pp == NULL || *pp == 0) {
+		dev_notice(cs->dev, "%s: %s missing\n",
+			   "CONNECT_REQ", "Called party number");
+		info = CapiIllMessageParmCoding;
+		goto error;
+	}
+	l = *pp++;
+	/* check type of number/numbering plan byte */
+	switch (*pp) {
+	case 0x80:	/* unknown type / unknown numbering plan */
+	case 0x81:	/* unknown type / ISDN/Telephony numbering plan */
+		break;
+	default:	/* others: warn about potential misinterpretation */
+		dev_notice(cs->dev, "%s: %s type/plan 0x%02x unsupported\n",
+			   "CONNECT_REQ", "Called party number", *pp);
+	}
+	pp++;
+	l--;
+	/* translate "**" internal call prefix to CTP value */
+	if (l >= 2 && pp[0] == '*' && pp[1] == '*') {
+		s = "^SCTP=0\r";
+		pp += 2;
+		l -= 2;
+	} else {
+		s = "^SCTP=1\r";
+	}
+	commands[AT_TYPE] = kstrdup(s, GFP_KERNEL);
+	if (!commands[AT_TYPE])
+		goto oom;
+	commands[AT_DIAL] = kmalloc(l+3, GFP_KERNEL);
+	if (!commands[AT_DIAL])
+		goto oom;
+	snprintf(commands[AT_DIAL], l+3, "D%.*s\r", l, pp);
+
+	/* encode parameter: Calling party number */
+	pp = cmsg->CallingPartyNumber;
+	if (pp != NULL && *pp > 0) {
+		l = *pp++;
+
+		/* check type of number/numbering plan byte */
+		/* ToDo: allow for/handle Ext=1? */
+		switch (*pp) {
+		case 0x00:	/* unknown type / unknown numbering plan */
+		case 0x01:	/* unknown type / ISDN/Telephony num. plan */
+			break;
+		default:
+			dev_notice(cs->dev,
+				   "%s: %s type/plan 0x%02x unsupported\n",
+				   "CONNECT_REQ", "Calling party number", *pp);
+		}
+		pp++;
+		l--;
+
+		/* check presentation indicator */
+		if (!l) {
+			dev_notice(cs->dev, "%s: %s IE truncated\n",
+				   "CONNECT_REQ", "Calling party number");
+			info = CapiIllMessageParmCoding;
+			goto error;
+		}
+		switch (*pp & 0xfc) { /* ignore Screening indicator */
+		case 0x80:	/* Presentation allowed */
+			s = "^SCLIP=1\r";
+			break;
+		case 0xa0:	/* Presentation restricted */
+			s = "^SCLIP=0\r";
+			break;
+		default:
+			dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+				   "CONNECT_REQ",
+				   "Presentation/Screening indicator",
+				   *pp);
+			s = "^SCLIP=1\r";
+		}
+		commands[AT_CLIP] = kstrdup(s, GFP_KERNEL);
+		if (!commands[AT_CLIP])
+			goto oom;
+		pp++;
+		l--;
+
+		if (l) {
+			/* number */
+			commands[AT_MSN] = kmalloc(l+8, GFP_KERNEL);
+			if (!commands[AT_MSN])
+				goto oom;
+			snprintf(commands[AT_MSN], l+8, "^SMSN=%*s\r", l, pp);
+		}
+	}
+
+	/* check parameter: CIP Value */
+	if (cmsg->CIPValue > ARRAY_SIZE(cip2bchlc) ||
+	    (cmsg->CIPValue > 0 && cip2bchlc[cmsg->CIPValue].bc == NULL)) {
+		dev_notice(cs->dev, "%s: unknown CIP value %d\n",
+			   "CONNECT_REQ", cmsg->CIPValue);
+		info = CapiCipValueUnknown;
+		goto error;
+	}
+
+	/* check/encode parameter: BC */
+	if (cmsg->BC && cmsg->BC[0]) {
+		/* explicit BC overrides CIP */
+		l = 2*cmsg->BC[0] + 7;
+		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_BC])
+			goto oom;
+		strcpy(commands[AT_BC], "^SBC=");
+		decode_ie(cmsg->BC, commands[AT_BC]+5);
+		strcpy(commands[AT_BC] + l - 2, "\r");
+	} else if (cip2bchlc[cmsg->CIPValue].bc) {
+		l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
+		commands[AT_BC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_BC])
+			goto oom;
+		snprintf(commands[AT_BC], l, "^SBC=%s\r",
+			 cip2bchlc[cmsg->CIPValue].bc);
+	}
+
+	/* check/encode parameter: HLC */
+	if (cmsg->HLC && cmsg->HLC[0]) {
+		/* explicit HLC overrides CIP */
+		l = 2*cmsg->HLC[0] + 7;
+		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_HLC])
+			goto oom;
+		strcpy(commands[AT_HLC], "^SHLC=");
+		decode_ie(cmsg->HLC, commands[AT_HLC]+5);
+		strcpy(commands[AT_HLC] + l - 2, "\r");
+	} else if (cip2bchlc[cmsg->CIPValue].hlc) {
+		l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
+		commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
+		if (!commands[AT_HLC])
+			goto oom;
+		snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
+			 cip2bchlc[cmsg->CIPValue].hlc);
+	}
+
+	/* check/encode parameter: B Protocol */
+	if (cmsg->BProtocol == CAPI_DEFAULT) {
+		bcs->proto2 = L2_HDLC;
+		dev_warn(cs->dev,
+		    "B2 Protocol X.75 SLP unsupported, using Transparent\n");
+	} else {
+		switch (cmsg->B1protocol) {
+		case 0:
+			bcs->proto2 = L2_HDLC;
+			break;
+		case 1:
+			bcs->proto2 = L2_BITSYNC;
+			break;
+		default:
+			dev_warn(cs->dev,
+			    "B1 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B1protocol);
+			bcs->proto2 = L2_BITSYNC;
+		}
+		if (cmsg->B2protocol != 1)
+			dev_warn(cs->dev,
+			    "B2 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B2protocol);
+		if (cmsg->B3protocol != 0)
+			dev_warn(cs->dev,
+			    "B3 Protocol %u unsupported, using Transparent\n",
+				 cmsg->B3protocol);
+		ignore_cstruct_param(cs, cmsg->B1configuration,
+					"CONNECT_REQ", "B1 Configuration");
+		ignore_cstruct_param(cs, cmsg->B2configuration,
+					"CONNECT_REQ", "B2 Configuration");
+		ignore_cstruct_param(cs, cmsg->B3configuration,
+					"CONNECT_REQ", "B3 Configuration");
+	}
+	commands[AT_PROTO] = kmalloc(9, GFP_KERNEL);
+	if (!commands[AT_PROTO])
+		goto oom;
+	snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+
+	/* ToDo: check/encode remaining parameters */
+	ignore_cstruct_param(cs, cmsg->CalledPartySubaddress,
+					"CONNECT_REQ", "Called pty subaddr");
+	ignore_cstruct_param(cs, cmsg->CallingPartySubaddress,
+					"CONNECT_REQ", "Calling pty subaddr");
+	ignore_cstruct_param(cs, cmsg->LLC,
+					"CONNECT_REQ", "LLC");
+	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+		ignore_cstruct_param(cs, cmsg->BChannelinformation,
+					"CONNECT_REQ", "B Channel Information");
+		ignore_cstruct_param(cs, cmsg->Keypadfacility,
+					"CONNECT_REQ", "Keypad Facility");
+		ignore_cstruct_param(cs, cmsg->Useruserdata,
+					"CONNECT_REQ", "User-User Data");
+		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+					"CONNECT_REQ", "Facility Data Array");
+	}
+
+	/* encode parameter: B channel to use */
+	commands[AT_ISO] = kmalloc(9, GFP_KERNEL);
+	if (!commands[AT_ISO])
+		goto oom;
+	snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
+		 (unsigned) bcs->channel + 1);
+
+	/* queue & schedule EV_DIAL event */
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
+			       bcs->at_state.seq_index, NULL))
+		goto oom;
+	gig_dbg(DEBUG_CMD, "scheduling DIAL");
+	gigaset_schedule_event(cs);
+	ap->connected = APCONN_SETUP;
+	send_conf(iif, ap, skb, CapiSuccess);
+	return;
+
+oom:
+	dev_err(cs->dev, "%s: out of memory\n", __func__);
+	info = CAPI_MSGOSRESOURCEERR;
+error:
+	if (commands)
+		for (i = 0; i < AT_NUM; i++)
+			kfree(commands[i]);
+	kfree(commands);
+	gigaset_free_channel(bcs);
+	send_conf(iif, ap, skb, info);
+}
+
+/*
+ * process CONNECT_RESP message
+ * checks protocol parameters and queues an ACCEPT or HUP event
+ */
+static void do_connect_resp(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	struct gigaset_capi_appl *oap;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	dev_kfree_skb_any(skb);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_RESP", "PLCI", cmsg->adr.adrPLCI);
+		return;
+	}
+	bcs = cs->bcs + channel - 1;
+
+	switch (cmsg->Reject) {
+	case 0:		/* Accept */
+		/* drop all competing applications, keep only this one */
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
+			if (oap != ap)
+				send_disconnect_ind(bcs, oap,
+					CapiCallGivenToOtherApplication);
+		ap->bcnext = NULL;
+		bcs->ap = ap;
+		bcs->chstate |= CHS_NOTIFY_LL;
+
+		/* check/encode B channel protocol */
+		if (cmsg->BProtocol == CAPI_DEFAULT) {
+			bcs->proto2 = L2_HDLC;
+			dev_warn(cs->dev,
+		"B2 Protocol X.75 SLP unsupported, using Transparent\n");
+		} else {
+			switch (cmsg->B1protocol) {
+			case 0:
+				bcs->proto2 = L2_HDLC;
+				break;
+			case 1:
+				bcs->proto2 = L2_BITSYNC;
+				break;
+			default:
+				dev_warn(cs->dev,
+			"B1 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B1protocol);
+				bcs->proto2 = L2_BITSYNC;
+			}
+			if (cmsg->B2protocol != 1)
+				dev_warn(cs->dev,
+			"B2 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B2protocol);
+			if (cmsg->B3protocol != 0)
+				dev_warn(cs->dev,
+			"B3 Protocol %u unsupported, using Transparent\n",
+					 cmsg->B3protocol);
+			ignore_cstruct_param(cs, cmsg->B1configuration,
+					"CONNECT_RESP", "B1 Configuration");
+			ignore_cstruct_param(cs, cmsg->B2configuration,
+					"CONNECT_RESP", "B2 Configuration");
+			ignore_cstruct_param(cs, cmsg->B3configuration,
+					"CONNECT_RESP", "B3 Configuration");
+		}
+
+		/* ToDo: check/encode remaining parameters */
+		ignore_cstruct_param(cs, cmsg->ConnectedNumber,
+					"CONNECT_RESP", "Connected Number");
+		ignore_cstruct_param(cs, cmsg->ConnectedSubaddress,
+					"CONNECT_RESP", "Connected Subaddress");
+		ignore_cstruct_param(cs, cmsg->LLC,
+					"CONNECT_RESP", "LLC");
+		if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+			ignore_cstruct_param(cs, cmsg->BChannelinformation,
+					"CONNECT_RESP", "BChannel Information");
+			ignore_cstruct_param(cs, cmsg->Keypadfacility,
+					"CONNECT_RESP", "Keypad Facility");
+			ignore_cstruct_param(cs, cmsg->Useruserdata,
+					"CONNECT_RESP", "User-User Data");
+			ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+					"CONNECT_RESP", "Facility Data Array");
+		}
+
+		/* Accept call */
+		if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+				       EV_ACCEPT, NULL, 0, NULL))
+			return;
+		gig_dbg(DEBUG_CMD, "scheduling ACCEPT");
+		gigaset_schedule_event(cs);
+		return;
+
+	case 1:			/* Ignore */
+		/* send DISCONNECT_IND to this application */
+		send_disconnect_ind(bcs, ap, 0);
+
+		/* remove it from the list of listening apps */
+		if (bcs->ap == ap) {
+			bcs->ap = ap->bcnext;
+			if (bcs->ap == NULL)
+				/* last one: stop ev-layer hupD notifications */
+				bcs->chstate &= ~CHS_NOTIFY_LL;
+			return;
+		}
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext) {
+			if (oap->bcnext == ap) {
+				oap->bcnext = oap->bcnext->bcnext;
+				return;
+			}
+		}
+		dev_err(cs->dev, "%s: application %u not found\n",
+			__func__, ap->id);
+		return;
+
+	default:		/* Reject */
+		/* drop all competing applications, keep only this one */
+		for (oap = bcs->ap; oap != NULL; oap = oap->bcnext)
+			if (oap != ap)
+				send_disconnect_ind(bcs, oap,
+					CapiCallGivenToOtherApplication);
+		ap->bcnext = NULL;
+		bcs->ap = ap;
+
+		/* reject call - will trigger DISCONNECT_IND for this app */
+		dev_info(cs->dev, "%s: Reject=%x\n",
+			 "CONNECT_RESP", cmsg->Reject);
+		if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+				       EV_HUP, NULL, 0, NULL))
+			return;
+		gig_dbg(DEBUG_CMD, "scheduling HUP");
+		gigaset_schedule_event(cs);
+		return;
+	}
+}
+
+/*
+ * process CONNECT_B3_REQ message
+ * build NCCI and emit CONNECT_B3_CONF reply
+ */
+static void do_connect_b3_req(struct gigaset_capi_ctr *iif,
+			      struct gigaset_capi_appl *ap,
+			      struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_B3_REQ", "PLCI", cmsg->adr.adrPLCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+
+	/* mark logical connection active */
+	ap->connected = APCONN_ACTIVE;
+
+	/* build NCCI: always 1 (one B3 connection only) */
+	cmsg->adr.adrNCCI |= 1 << 16;
+
+	/* NCPI parameter: not applicable for B3 Transparent */
+	ignore_cstruct_param(cs, cmsg->NCPI, "CONNECT_B3_REQ", "NCPI");
+	send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+				CapiNcpiNotSupportedByProtocol : CapiSuccess);
+}
+
+/*
+ * process CONNECT_B3_RESP message
+ * Depending on the Reject parameter, either emit CONNECT_B3_ACTIVE_IND
+ * or queue EV_HUP and emit DISCONNECT_B3_IND.
+ * The emitted message is always shorter than the received one,
+ * allowing to reuse the skb.
+ */
+static void do_connect_b3_resp(struct gigaset_capi_ctr *iif,
+			       struct gigaset_capi_appl *ap,
+			       struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	int channel;
+	unsigned int msgsize;
+	u8 command;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number and NCCI */
+	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels ||
+	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "CONNECT_B3_RESP", "NCCI", cmsg->adr.adrNCCI);
+		dev_kfree_skb_any(skb);
+		return;
+	}
+	bcs = &cs->bcs[channel-1];
+
+	if (cmsg->Reject) {
+		/* Reject: clear B3 connect received flag */
+		ap->connected = APCONN_SETUP;
+
+		/* trigger hangup, causing eventual DISCONNECT_IND */
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_HUP, NULL, 0, NULL)) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			dev_kfree_skb_any(skb);
+			return;
+		}
+		gig_dbg(DEBUG_CMD, "scheduling HUP");
+		gigaset_schedule_event(cs);
+
+		/* emit DISCONNECT_B3_IND */
+		command = CAPI_DISCONNECT_B3;
+		msgsize = CAPI_DISCONNECT_B3_IND_BASELEN;
+	} else {
+		/*
+		 * Accept: emit CONNECT_B3_ACTIVE_IND immediately, as
+		 * we only send CONNECT_B3_IND if the B channel is up
+		 */
+		command = CAPI_CONNECT_B3_ACTIVE;
+		msgsize = CAPI_CONNECT_B3_ACTIVE_IND_BASELEN;
+	}
+	capi_cmsg_header(cmsg, ap->id, command, CAPI_IND,
+			 ap->nextMessageNumber++, cmsg->adr.adrNCCI);
+	__skb_trim(skb, msgsize);
+	capi_cmsg2message(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+	capi_ctr_handle_message(&iif->ctr, ap->id, skb);
+}
+
+/*
+ * process DISCONNECT_REQ message
+ * schedule EV_HUP and emit DISCONNECT_B3_IND if necessary,
+ * emit DISCONNECT_CONF reply
+ */
+static void do_disconnect_req(struct gigaset_capi_ctr *iif,
+			      struct gigaset_capi_appl *ap,
+			      struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	struct bc_state *bcs;
+	_cmsg *b3cmsg;
+	struct sk_buff *b3skb;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number from PLCI */
+	channel = (cmsg->adr.adrPLCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DISCONNECT_REQ", "PLCI", cmsg->adr.adrPLCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+	bcs = cs->bcs + channel - 1;
+
+	/* ToDo: process parameter: Additional info */
+	if (cmsg->AdditionalInfo != CAPI_DEFAULT) {
+		ignore_cstruct_param(cs, cmsg->BChannelinformation,
+				     "DISCONNECT_REQ", "B Channel Information");
+		ignore_cstruct_param(cs, cmsg->Keypadfacility,
+				     "DISCONNECT_REQ", "Keypad Facility");
+		ignore_cstruct_param(cs, cmsg->Useruserdata,
+				     "DISCONNECT_REQ", "User-User Data");
+		ignore_cstruct_param(cs, cmsg->Facilitydataarray,
+				     "DISCONNECT_REQ", "Facility Data Array");
+	}
+
+	/* skip if DISCONNECT_IND already sent */
+	if (!ap->connected)
+		return;
+
+	/* check for active logical connection */
+	if (ap->connected >= APCONN_ACTIVE) {
+		/*
+		 * emit DISCONNECT_B3_IND with cause 0x3301
+		 * use separate cmsg structure, as the content of iif->acmsg
+		 * is still needed for creating the _CONF message
+		 */
+		b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL);
+		if (!b3cmsg) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+			return;
+		}
+		capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
+				 ap->nextMessageNumber++,
+				 cmsg->adr.adrPLCI | (1 << 16));
+		b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
+		b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
+		if (b3skb == NULL) {
+			dev_err(cs->dev, "%s: out of memory\n", __func__);
+			send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+			return;
+		}
+		capi_cmsg2message(b3cmsg,
+			__skb_put(b3skb, CAPI_DISCONNECT_B3_IND_BASELEN));
+		kfree(b3cmsg);
+		capi_ctr_handle_message(&iif->ctr, ap->id, b3skb);
+	}
+
+	/* trigger hangup, causing eventual DISCONNECT_IND */
+	if (!gigaset_add_event(cs, &bcs->at_state, EV_HUP, NULL, 0, NULL)) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+	gig_dbg(DEBUG_CMD, "scheduling HUP");
+	gigaset_schedule_event(cs);
+
+	/* emit reply */
+	send_conf(iif, ap, skb, CapiSuccess);
+}
+
+/*
+ * process DISCONNECT_B3_REQ message
+ * schedule EV_HUP and emit DISCONNECT_B3_CONF reply
+ */
+static void do_disconnect_b3_req(struct gigaset_capi_ctr *iif,
+				 struct gigaset_capi_appl *ap,
+				 struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	_cmsg *cmsg = &iif->acmsg;
+	int channel;
+
+	/* decode message */
+	capi_message2cmsg(cmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, cmsg);
+
+	/* extract and check channel number and NCCI */
+	channel = (cmsg->adr.adrNCCI >> 8) & 0xff;
+	if (!channel || channel > cs->channels ||
+	    ((cmsg->adr.adrNCCI >> 16) & 0xffff) != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DISCONNECT_B3_REQ", "NCCI", cmsg->adr.adrNCCI);
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+
+	/* reject if logical connection not active */
+	if (ap->connected < APCONN_ACTIVE) {
+		send_conf(iif, ap, skb,
+			  CapiMessageNotSupportedInCurrentState);
+		return;
+	}
+
+	/* trigger hangup, causing eventual DISCONNECT_B3_IND */
+	if (!gigaset_add_event(cs, &cs->bcs[channel-1].at_state,
+			       EV_HUP, NULL, 0, NULL)) {
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+	gig_dbg(DEBUG_CMD, "scheduling HUP");
+	gigaset_schedule_event(cs);
+
+	/* NCPI parameter: not applicable for B3 Transparent */
+	ignore_cstruct_param(cs, cmsg->NCPI,
+				"DISCONNECT_B3_REQ", "NCPI");
+	send_conf(iif, ap, skb, (cmsg->NCPI && cmsg->NCPI[0]) ?
+				CapiNcpiNotSupportedByProtocol : CapiSuccess);
+}
+
+/*
+ * process DATA_B3_REQ message
+ */
+static void do_data_b3_req(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	struct cardstate *cs = iif->ctr.driverdata;
+	int channel = CAPIMSG_PLCI_PART(skb->data);
+	u16 ncci = CAPIMSG_NCCI_PART(skb->data);
+	u16 msglen = CAPIMSG_LEN(skb->data);
+	u16 datalen = CAPIMSG_DATALEN(skb->data);
+	u16 flags = CAPIMSG_FLAGS(skb->data);
+
+	/* frequent message, avoid _cmsg overhead */
+	dump_rawmsg(DEBUG_LLDATA, "DATA_B3_REQ", skb->data);
+
+	gig_dbg(DEBUG_LLDATA,
+		"Receiving data from LL (ch: %d, flg: %x, sz: %d|%d)",
+		channel, flags, msglen, datalen);
+
+	/* check parameters */
+	if (channel == 0 || channel > cs->channels || ncci != 1) {
+		dev_notice(cs->dev, "%s: invalid %s 0x%02x\n",
+			   "DATA_B3_REQ", "NCCI", CAPIMSG_NCCI(skb->data));
+		send_conf(iif, ap, skb, CapiIllContrPlciNcci);
+		return;
+	}
+	if (msglen != CAPI_DATA_B3_REQ_LEN && msglen != CAPI_DATA_B3_REQ_LEN64)
+		dev_notice(cs->dev, "%s: unexpected length %d\n",
+			   "DATA_B3_REQ", msglen);
+	if (msglen + datalen != skb->len)
+		dev_notice(cs->dev, "%s: length mismatch (%d+%d!=%d)\n",
+			   "DATA_B3_REQ", msglen, datalen, skb->len);
+	if (msglen + datalen > skb->len) {
+		/* message too short for announced data length */
+		send_conf(iif, ap, skb, CapiIllMessageParmCoding); /* ? */
+		return;
+	}
+	if (flags & CAPI_FLAGS_RESERVED) {
+		dev_notice(cs->dev, "%s: reserved flags set (%x)\n",
+			   "DATA_B3_REQ", flags);
+		send_conf(iif, ap, skb, CapiIllMessageParmCoding);
+		return;
+	}
+
+	/* reject if logical connection not active */
+	if (ap->connected < APCONN_ACTIVE) {
+		send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
+		return;
+	}
+
+	/* pull CAPI message into link layer header */
+	skb_reset_mac_header(skb);
+	skb->mac_len = msglen;
+	skb_pull(skb, msglen);
+
+	/* pass to device-specific module */
+	if (cs->ops->send_skb(&cs->bcs[channel-1], skb) < 0) {
+		send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
+		return;
+	}
+
+	/* DATA_B3_CONF reply will be sent by gigaset_skb_sent() */
+
+	/*
+	 * ToDo: honor unset "delivery confirmation" bit
+	 * (send DATA_B3_CONF immediately?)
+	 */
+}
+
+/*
+ * process RESET_B3_REQ message
+ * just always reply "not supported by current protocol"
+ */
+static void do_reset_b3_req(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb,
+		  CapiResetProcedureNotSupportedByCurrentProtocol);
+}
+
+/*
+ * dump unsupported/ignored messages at most twice per minute,
+ * some apps send those very frequently
+ */
+static unsigned long ignored_msg_dump_time;
+
+/*
+ * unsupported CAPI message handler
+ */
+static void do_unsupported(struct gigaset_capi_ctr *iif,
+			   struct gigaset_capi_appl *ap,
+			   struct sk_buff *skb)
+{
+	/* decode message */
+	capi_message2cmsg(&iif->acmsg, skb->data);
+	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000))
+		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	send_conf(iif, ap, skb, CapiMessageNotSupportedInCurrentState);
+}
+
+/*
+ * CAPI message handler: no-op
+ */
+static void do_nothing(struct gigaset_capi_ctr *iif,
+		       struct gigaset_capi_appl *ap,
+		       struct sk_buff *skb)
+{
+	if (printk_timed_ratelimit(&ignored_msg_dump_time, 30 * 1000)) {
+		/* decode message */
+		capi_message2cmsg(&iif->acmsg, skb->data);
+		dump_cmsg(DEBUG_CMD, __func__, &iif->acmsg);
+	}
+	dev_kfree_skb_any(skb);
+}
+
+static void do_data_b3_resp(struct gigaset_capi_ctr *iif,
+			    struct gigaset_capi_appl *ap,
+			    struct sk_buff *skb)
+{
+	dump_rawmsg(DEBUG_LLDATA, __func__, skb->data);
+	dev_kfree_skb_any(skb);
+}
+
+/* table of outgoing CAPI message handlers with lookup function */
+typedef void (*capi_send_handler_t)(struct gigaset_capi_ctr *,
+				    struct gigaset_capi_appl *,
+				    struct sk_buff *);
+
+static struct {
+	u16 cmd;
+	capi_send_handler_t handler;
+} capi_send_handler_table[] = {
+	/* most frequent messages first for faster lookup */
+	{ CAPI_DATA_B3_REQ, do_data_b3_req },
+	{ CAPI_DATA_B3_RESP, do_data_b3_resp },
+
+	{ CAPI_ALERT_REQ, do_alert_req },
+	{ CAPI_CONNECT_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_B3_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_B3_REQ, do_connect_b3_req },
+	{ CAPI_CONNECT_B3_RESP, do_connect_b3_resp },
+	{ CAPI_CONNECT_B3_T90_ACTIVE_RESP, do_nothing },
+	{ CAPI_CONNECT_REQ, do_connect_req },
+	{ CAPI_CONNECT_RESP, do_connect_resp },
+	{ CAPI_DISCONNECT_B3_REQ, do_disconnect_b3_req },
+	{ CAPI_DISCONNECT_B3_RESP, do_nothing },
+	{ CAPI_DISCONNECT_REQ, do_disconnect_req },
+	{ CAPI_DISCONNECT_RESP, do_nothing },
+	{ CAPI_FACILITY_REQ, do_facility_req },
+	{ CAPI_FACILITY_RESP, do_nothing },
+	{ CAPI_LISTEN_REQ, do_listen_req },
+	{ CAPI_SELECT_B_PROTOCOL_REQ, do_unsupported },
+	{ CAPI_RESET_B3_REQ, do_reset_b3_req },
+	{ CAPI_RESET_B3_RESP, do_nothing },
+
+	/*
+	 * ToDo: support overlap sending (requires ev-layer state
+	 * machine extension to generate additional ATD commands)
+	 */
+	{ CAPI_INFO_REQ, do_unsupported },
+	{ CAPI_INFO_RESP, do_nothing },
+
+	/*
+	 * ToDo: what's the proper response for these?
+	 */
+	{ CAPI_MANUFACTURER_REQ, do_nothing },
+	{ CAPI_MANUFACTURER_RESP, do_nothing },
+};
+
+/* look up handler */
+static inline capi_send_handler_t lookup_capi_send_handler(const u16 cmd)
+{
+	size_t i;
+
+	for (i = 0; i < ARRAY_SIZE(capi_send_handler_table); i++)
+		if (capi_send_handler_table[i].cmd == cmd)
+			return capi_send_handler_table[i].handler;
+	return NULL;
+}
+
+
+/**
+ * gigaset_send_message() - accept a CAPI message from an application
+ * @ctr:	controller descriptor structure.
+ * @skb:	CAPI message.
+ *
+ * Return value: CAPI error code
+ * Note: capidrv (and probably others, too) only uses the return value to
+ * decide whether it has to free the skb (only if result != CAPI_NOERROR (0))
+ */
+static u16 gigaset_send_message(struct capi_ctr *ctr, struct sk_buff *skb)
+{
+	struct gigaset_capi_ctr *iif
+		= container_of(ctr, struct gigaset_capi_ctr, ctr);
+	struct cardstate *cs = ctr->driverdata;
+	struct gigaset_capi_appl *ap;
+	capi_send_handler_t handler;
+
+	/* can only handle linear sk_buffs */
+	if (skb_linearize(skb) < 0) {
+		dev_warn(cs->dev, "%s: skb_linearize failed\n", __func__);
+		return CAPI_MSGOSRESOURCEERR;
+	}
+
+	/* retrieve application data structure */
+	ap = get_appl(iif, CAPIMSG_APPID(skb->data));
+	if (!ap) {
+		dev_notice(cs->dev, "%s: application %u not registered\n",
+			   __func__, CAPIMSG_APPID(skb->data));
+		return CAPI_ILLAPPNR;
+	}
+
+	/* look up command */
+	handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
+	if (!handler) {
+		/* unknown/unsupported message type */
+		if (printk_ratelimit())
+			dev_notice(cs->dev, "%s: unsupported message %u\n",
+				   __func__, CAPIMSG_CMD(skb->data));
+		return CAPI_ILLCMDORSUBCMDORMSGTOSMALL;
+	}
+
+	/* serialize */
+	if (atomic_add_return(1, &iif->sendqlen) > 1) {
+		/* queue behind other messages */
+		skb_queue_tail(&iif->sendqueue, skb);
+		return CAPI_NOERROR;
+	}
+
+	/* process message */
+	handler(iif, ap, skb);
+
+	/* process other messages arrived in the meantime */
+	while (atomic_sub_return(1, &iif->sendqlen) > 0) {
+		skb = skb_dequeue(&iif->sendqueue);
+		if (!skb) {
+			/* should never happen */
+			dev_err(cs->dev, "%s: send queue empty\n", __func__);
+			continue;
+		}
+		ap = get_appl(iif, CAPIMSG_APPID(skb->data));
+		if (!ap) {
+			/* could that happen? */
+			dev_warn(cs->dev, "%s: application %u vanished\n",
+				 __func__, CAPIMSG_APPID(skb->data));
+			continue;
+		}
+		handler = lookup_capi_send_handler(CAPIMSG_CMD(skb->data));
+		if (!handler) {
+			/* should never happen */
+			dev_err(cs->dev, "%s: handler %x vanished\n",
+				__func__, CAPIMSG_CMD(skb->data));
+			continue;
+		}
+		handler(iif, ap, skb);
+	}
+
+	return CAPI_NOERROR;
+}
+
+/**
+ * gigaset_procinfo() - build single line description for controller
+ * @ctr:	controller descriptor structure.
+ *
+ * Return value: pointer to generated string (null terminated)
+ */
+static char *gigaset_procinfo(struct capi_ctr *ctr)
+{
+	return ctr->name;	/* ToDo: more? */
+}
+
+/**
+ * gigaset_ctr_read_proc() - build controller proc file entry
+ * @page:	buffer of PAGE_SIZE bytes for receiving the entry.
+ * @start:	unused.
+ * @off:	unused.
+ * @count:	unused.
+ * @eof:	unused.
+ * @ctr:	controller descriptor structure.
+ *
+ * Return value: length of generated entry
+ */
+static int gigaset_ctr_read_proc(char *page, char **start, off_t off,
+			  int count, int *eof, struct capi_ctr *ctr)
+{
+	struct cardstate *cs = ctr->driverdata;
+	char *s;
+	int i;
+	int len = 0;
+	len += sprintf(page+len, "%-16s %s\n", "name", ctr->name);
+	len += sprintf(page+len, "%-16s %s %s\n", "dev",
+			dev_driver_string(cs->dev), dev_name(cs->dev));
+	len += sprintf(page+len, "%-16s %d\n", "id", cs->myid);
+	if (cs->gotfwver)
+		len += sprintf(page+len, "%-16s %d.%d.%d.%d\n", "firmware",
+			cs->fwver[0], cs->fwver[1], cs->fwver[2], cs->fwver[3]);
+	len += sprintf(page+len, "%-16s %d\n", "channels",
+			cs->channels);
+	len += sprintf(page+len, "%-16s %s\n", "onechannel",
+			cs->onechannel ? "yes" : "no");
+
+	switch (cs->mode) {
+	case M_UNKNOWN:
+		s = "unknown";
+		break;
+	case M_CONFIG:
+		s = "config";
+		break;
+	case M_UNIMODEM:
+		s = "Unimodem";
+		break;
+	case M_CID:
+		s = "CID";
+		break;
+	default:
+		s = "??";
+	}
+	len += sprintf(page+len, "%-16s %s\n", "mode", s);
+
+	switch (cs->mstate) {
+	case MS_UNINITIALIZED:
+		s = "uninitialized";
+		break;
+	case MS_INIT:
+		s = "init";
+		break;
+	case MS_LOCKED:
+		s = "locked";
+		break;
+	case MS_SHUTDOWN:
+		s = "shutdown";
+		break;
+	case MS_RECOVER:
+		s = "recover";
+		break;
+	case MS_READY:
+		s = "ready";
+		break;
+	default:
+		s = "??";
+	}
+	len += sprintf(page+len, "%-16s %s\n", "mstate", s);
+
+	len += sprintf(page+len, "%-16s %s\n", "running",
+			cs->running ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "connected",
+			cs->connected ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "isdn_up",
+			cs->isdn_up ? "yes" : "no");
+	len += sprintf(page+len, "%-16s %s\n", "cidmode",
+			cs->cidmode ? "yes" : "no");
+
+	for (i = 0; i < cs->channels; i++) {
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "corrupted",
+				cs->bcs[i].corrupted);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_down",
+				cs->bcs[i].trans_down);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "trans_up",
+				cs->bcs[i].trans_up);
+		len += sprintf(page+len, "[%d]%-13s %d\n", i, "chstate",
+				cs->bcs[i].chstate);
+		switch (cs->bcs[i].proto2) {
+		case L2_BITSYNC:
+			s = "bitsync";
+			break;
+		case L2_HDLC:
+			s = "HDLC";
+			break;
+		case L2_VOICE:
+			s = "voice";
+			break;
+		default:
+			s = "??";
+		}
+		len += sprintf(page+len, "[%d]%-13s %s\n", i, "proto2", s);
+	}
+	return len;
+}
+
+
+static struct capi_driver capi_driver_gigaset = {
+	.name		= "gigaset",
+	.revision	= "1.0",
+};
+
+/**
+ * gigaset_isdn_register() - register to LL
+ * @cs:		device descriptor structure.
+ * @isdnid:	device name.
+ *
+ * Called by main module to register the device with the LL.
+ *
+ * Return value: 1 for success, 0 for failure
+ */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	struct gigaset_capi_ctr *iif;
+	int rc;
+
+	pr_info("Kernel CAPI interface\n");
+
+	iif = kmalloc(sizeof(*iif), GFP_KERNEL);
+	if (!iif) {
+		pr_err("%s: out of memory\n", __func__);
+		return 0;
+	}
+
+	/* register driver with CAPI (ToDo: what for?) */
+	register_capi_driver(&capi_driver_gigaset);
+
+	/* prepare controller structure */
+	iif->ctr.owner         = THIS_MODULE;
+	iif->ctr.driverdata    = cs;
+	strncpy(iif->ctr.name, isdnid, sizeof(iif->ctr.name));
+	iif->ctr.driver_name   = "gigaset";
+	iif->ctr.load_firmware = gigaset_load_firmware;
+	iif->ctr.reset_ctr     = gigaset_reset_ctr;
+	iif->ctr.register_appl = gigaset_register_appl;
+	iif->ctr.release_appl  = gigaset_release_appl;
+	iif->ctr.send_message  = gigaset_send_message;
+	iif->ctr.procinfo      = gigaset_procinfo;
+	iif->ctr.ctr_read_proc = gigaset_ctr_read_proc;
+	INIT_LIST_HEAD(&iif->appls);
+	skb_queue_head_init(&iif->sendqueue);
+	atomic_set(&iif->sendqlen, 0);
+
+	/* register controller with CAPI */
+	rc = attach_capi_ctr(&iif->ctr);
+	if (rc) {
+		pr_err("attach_capi_ctr failed (%d)\n", rc);
+		unregister_capi_driver(&capi_driver_gigaset);
+		kfree(iif);
+		return 0;
+	}
+
+	cs->iif = iif;
+	cs->hw_hdr_len = CAPI_DATA_B3_REQ_LEN;
+	return 1;
+}
+
+/**
+ * gigaset_isdn_unregister() - unregister from LL
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to unregister the device from the LL.
+ */
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+	struct gigaset_capi_ctr *iif = cs->iif;
+
+	detach_capi_ctr(&iif->ctr);
+	kfree(iif);
+	cs->iif = NULL;
+	unregister_capi_driver(&capi_driver_gigaset);
+}
diff --git a/drivers/isdn/gigaset/common.c b/drivers/isdn/gigaset/common.c
index 33dcd8d..c438cfc 100644
--- a/drivers/isdn/gigaset/common.c
+++ b/drivers/isdn/gigaset/common.c
@@ -108,7 +108,7 @@
 {
 	int i, r;
 
-	cs->control_state = TIOCM_RTS; //FIXME
+	cs->control_state = TIOCM_RTS;
 
 	r = setflags(cs, TIOCM_DTR, 200);
 	if (r < 0)
@@ -132,10 +132,10 @@
 
 error:
 	dev_err(cs->dev, "error %d on setuartbits\n", -r);
-	cs->control_state = TIOCM_RTS|TIOCM_DTR; // FIXME is this a good value?
+	cs->control_state = TIOCM_RTS|TIOCM_DTR;
 	cs->ops->set_modem_ctrl(cs, 0, TIOCM_RTS|TIOCM_DTR);
 
-	return -1; //r
+	return -1;
 }
 
 static int test_timeout(struct at_state_t *at_state)
@@ -150,10 +150,9 @@
 	}
 
 	if (!gigaset_add_event(at_state->cs, at_state, EV_TIMEOUT, NULL,
-			       at_state->timer_index, NULL)) {
-		//FIXME what should we do?
-	}
-
+			       at_state->timer_index, NULL))
+			dev_err(at_state->cs->dev, "%s: out of memory\n",
+				__func__);
 	return 1;
 }
 
@@ -207,6 +206,32 @@
 	return 1;
 }
 
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs)
+{
+	unsigned long flags;
+	int i;
+
+	spin_lock_irqsave(&cs->lock, flags);
+	if (!try_module_get(cs->driver->owner)) {
+		gig_dbg(DEBUG_ANY,
+			"could not get module for allocating channel");
+		spin_unlock_irqrestore(&cs->lock, flags);
+		return NULL;
+	}
+	for (i = 0; i < cs->channels; ++i)
+		if (!cs->bcs[i].use_count) {
+			++cs->bcs[i].use_count;
+			cs->bcs[i].busy = 1;
+			spin_unlock_irqrestore(&cs->lock, flags);
+			gig_dbg(DEBUG_ANY, "allocated channel %d", i);
+			return cs->bcs + i;
+		}
+	module_put(cs->driver->owner);
+	spin_unlock_irqrestore(&cs->lock, flags);
+	gig_dbg(DEBUG_ANY, "no free channel");
+	return NULL;
+}
+
 void gigaset_free_channel(struct bc_state *bcs)
 {
 	unsigned long flags;
@@ -367,16 +392,15 @@
 	int i;
 
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->hw", bcs->channel);
-	if (!bcs->cs->ops->freebcshw(bcs)) {
+	if (!bcs->cs->ops->freebcshw(bcs))
 		gig_dbg(DEBUG_INIT, "failed");
-	}
 
 	gig_dbg(DEBUG_INIT, "clearing bcs[%d]->at_state", bcs->channel);
 	clear_at_state(&bcs->at_state);
 	gig_dbg(DEBUG_INIT, "freeing bcs[%d]->skb", bcs->channel);
+	dev_kfree_skb(bcs->skb);
+	bcs->skb = NULL;
 
-	if (bcs->skb)
-		dev_kfree_skb(bcs->skb);
 	for (i = 0; i < AT_NUM; ++i) {
 		kfree(bcs->commands[i]);
 		bcs->commands[i] = NULL;
@@ -463,6 +487,12 @@
 
 	switch (cs->cs_init) {
 	default:
+		/* clear B channel structures */
+		for (i = 0; i < cs->channels; ++i) {
+			gig_dbg(DEBUG_INIT, "clearing bcs[%d]", i);
+			gigaset_freebcs(cs->bcs + i);
+		}
+
 		/* clear device sysfs */
 		gigaset_free_dev_sysfs(cs);
 
@@ -471,28 +501,20 @@
 		gig_dbg(DEBUG_INIT, "clearing hw");
 		cs->ops->freecshw(cs);
 
-		//FIXME cmdbuf
-
 		/* fall through */
 	case 2: /* error in initcshw */
 		/* Deregister from LL */
 		make_invalid(cs, VALID_ID);
-		gig_dbg(DEBUG_INIT, "clearing iif");
-		gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
+		gigaset_isdn_unregister(cs);
 
 		/* fall through */
-	case 1: /* error when regestering to LL */
+	case 1: /* error when registering to LL */
 		gig_dbg(DEBUG_INIT, "clearing at_state");
 		clear_at_state(&cs->at_state);
 		dealloc_at_states(cs);
 
 		/* fall through */
-	case 0: /* error in one call to initbcs */
-		for (i = 0; i < cs->channels; ++i) {
-			gig_dbg(DEBUG_INIT, "clearing bcs[%d]", i);
-			gigaset_freebcs(cs->bcs + i);
-		}
-
+	case 0:	/* error in basic setup */
 		clear_events(cs);
 		gig_dbg(DEBUG_INIT, "freeing inbuf");
 		kfree(cs->inbuf);
@@ -534,16 +556,13 @@
 }
 
 
-static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct bc_state *bcs,
-			       struct cardstate *cs, int inputstate)
+static void gigaset_inbuf_init(struct inbuf_t *inbuf, struct cardstate *cs)
 /* inbuf->read must be allocated before! */
 {
 	inbuf->head = 0;
 	inbuf->tail = 0;
 	inbuf->cs = cs;
-	inbuf->bcs = bcs; /*base driver: NULL*/
-	inbuf->rcvbuf = NULL;
-	inbuf->inputstate = inputstate;
+	inbuf->inputstate = INS_command;
 }
 
 /**
@@ -599,7 +618,7 @@
 {
 	int i;
 
-	bcs->tx_skb = NULL; //FIXME -> hw part
+	bcs->tx_skb = NULL;
 
 	skb_queue_head_init(&bcs->squeue);
 
@@ -618,13 +637,13 @@
 	bcs->fcs = PPP_INITFCS;
 	bcs->inputstate = 0;
 	if (cs->ignoreframes) {
-		bcs->inputstate |= INS_skip_frame;
 		bcs->skb = NULL;
-	} else if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
-	else {
-		pr_err("out of memory\n");
-		bcs->inputstate |= INS_skip_frame;
+	} else {
+		bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
+		if (bcs->skb != NULL)
+			skb_reserve(bcs->skb, cs->hw_hdr_len);
+		else
+			pr_err("out of memory\n");
 	}
 
 	bcs->channel = channel;
@@ -645,8 +664,8 @@
 	gig_dbg(DEBUG_INIT, "  failed");
 
 	gig_dbg(DEBUG_INIT, "  freeing bcs[%d]->skb", channel);
-	if (bcs->skb)
-		dev_kfree_skb(bcs->skb);
+	dev_kfree_skb(bcs->skb);
+	bcs->skb = NULL;
 
 	return NULL;
 }
@@ -673,12 +692,13 @@
 				 int onechannel, int ignoreframes,
 				 int cidmode, const char *modulename)
 {
-	struct cardstate *cs = NULL;
+	struct cardstate *cs;
 	unsigned long flags;
 	int i;
 
 	gig_dbg(DEBUG_INIT, "allocating cs");
-	if (!(cs = alloc_cs(drv))) {
+	cs = alloc_cs(drv);
+	if (!cs) {
 		pr_err("maximum number of devices exceeded\n");
 		return NULL;
 	}
@@ -726,14 +746,6 @@
 	cs->mode = M_UNKNOWN;
 	cs->mstate = MS_UNINITIALIZED;
 
-	for (i = 0; i < channels; ++i) {
-		gig_dbg(DEBUG_INIT, "setting up bcs[%d].read", i);
-		if (!gigaset_initbcs(cs->bcs + i, cs, i)) {
-			pr_err("could not allocate channel %d data\n", i);
-			goto error;
-		}
-	}
-
 	++cs->cs_init;
 
 	gig_dbg(DEBUG_INIT, "setting up at_state");
@@ -743,10 +755,7 @@
 	cs->cbytes = 0;
 
 	gig_dbg(DEBUG_INIT, "setting up inbuf");
-	if (onechannel) {			//FIXME distinction necessary?
-		gigaset_inbuf_init(cs->inbuf, cs->bcs, cs, INS_command);
-	} else
-		gigaset_inbuf_init(cs->inbuf, NULL,    cs, INS_command);
+	gigaset_inbuf_init(cs->inbuf, cs);
 
 	cs->connected = 0;
 	cs->isdn_up = 0;
@@ -758,7 +767,7 @@
 	cs->cmdbytes = 0;
 
 	gig_dbg(DEBUG_INIT, "setting up iif");
-	if (!gigaset_register_to_LL(cs, modulename)) {
+	if (!gigaset_isdn_register(cs, modulename)) {
 		pr_err("error registering ISDN device\n");
 		goto error;
 	}
@@ -777,6 +786,15 @@
 	/* set up device sysfs */
 	gigaset_init_dev_sysfs(cs);
 
+	/* set up channel data structures */
+	for (i = 0; i < channels; ++i) {
+		gig_dbg(DEBUG_INIT, "setting up bcs[%d]", i);
+		if (!gigaset_initbcs(cs->bcs + i, cs, i)) {
+			pr_err("could not allocate channel %d data\n", i);
+			goto error;
+		}
+	}
+
 	spin_lock_irqsave(&cs->lock, flags);
 	cs->running = 1;
 	spin_unlock_irqrestore(&cs->lock, flags);
@@ -824,9 +842,10 @@
 	bcs->chstate = 0;
 
 	bcs->ignore = cs->ignoreframes;
-	if (bcs->ignore)
-		bcs->inputstate |= INS_skip_frame;
-
+	if (bcs->ignore) {
+		dev_kfree_skb(bcs->skb);
+		bcs->skb = NULL;
+	}
 
 	cs->ops->reinitbcshw(bcs);
 }
@@ -847,8 +866,6 @@
 	free_strings(&cs->at_state);
 	gigaset_at_init(&cs->at_state, NULL, cs, 0);
 
-	kfree(cs->inbuf->rcvbuf);
-	cs->inbuf->rcvbuf = NULL;
 	cs->inbuf->inputstate = INS_command;
 	cs->inbuf->head = 0;
 	cs->inbuf->tail = 0;
@@ -911,15 +928,13 @@
 		cs->ops->baud_rate(cs, B115200);
 		cs->ops->set_line_ctrl(cs, CS8);
 		cs->control_state = TIOCM_DTR|TIOCM_RTS;
-	} else {
-		//FIXME use some saved values?
 	}
 
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_START, NULL, 0, NULL)) {
 		cs->waiting = 0;
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto error;
 	}
 
@@ -959,7 +974,7 @@
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_SHUTDOWN, NULL, 0, NULL)) {
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto exit;
 	}
 
@@ -990,7 +1005,7 @@
 	cs->waiting = 1;
 
 	if (!gigaset_add_event(cs, &cs->at_state, EV_STOP, NULL, 0, NULL)) {
-		//FIXME what should we do?
+		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		goto exit;
 	}
 
diff --git a/drivers/isdn/gigaset/dummyll.c b/drivers/isdn/gigaset/dummyll.c
new file mode 100644
index 0000000..5b27c99
--- /dev/null
+++ b/drivers/isdn/gigaset/dummyll.c
@@ -0,0 +1,68 @@
+/*
+ * Dummy LL interface for the Gigaset driver
+ *
+ * Copyright (c) 2009 by Tilman Schmidt <tilman@imap.cc>.
+ *
+ * =====================================================================
+ *	This program is free software; you can redistribute it and/or
+ *	modify it under the terms of the GNU General Public License as
+ *	published by the Free Software Foundation; either version 2 of
+ *	the License, or (at your option) any later version.
+ * =====================================================================
+ */
+
+#include "gigaset.h"
+
+void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_sent);
+
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
+int gigaset_isdn_icall(struct at_state_t *at_state)
+{
+	return ICALL_IGNORE;
+}
+
+void gigaset_isdn_connD(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+}
+
+void gigaset_isdn_start(struct cardstate *cs)
+{
+}
+
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+}
+
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	pr_info("no ISDN subsystem interface\n");
+	return 1;
+}
+
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+}
diff --git a/drivers/isdn/gigaset/ev-layer.c b/drivers/isdn/gigaset/ev-layer.c
index cc768ca..ddeb045 100644
--- a/drivers/isdn/gigaset/ev-layer.c
+++ b/drivers/isdn/gigaset/ev-layer.c
@@ -40,8 +40,8 @@
 
 /* Possible ASCII responses */
 #define RSP_OK		0
-//#define RSP_BUSY	1
-//#define RSP_CONNECT	2
+#define RSP_BUSY	1
+#define RSP_CONNECT	2
 #define RSP_ZGCI	3
 #define RSP_RING	4
 #define RSP_ZAOC	5
@@ -68,7 +68,6 @@
 #define RSP_ZHLC	(RSP_STR + STR_ZHLC)
 #define RSP_ERROR	-1	/* ERROR              */
 #define RSP_WRONG_CID	-2	/* unknown cid in cmd */
-//#define RSP_EMPTY	-3
 #define RSP_UNKNOWN	-4	/* unknown response   */
 #define RSP_FAIL	-5	/* internal error     */
 #define RSP_INVAL	-6	/* invalid response   */
@@ -76,9 +75,9 @@
 #define RSP_NONE	-19
 #define RSP_STRING	-20
 #define RSP_NULL	-21
-//#define RSP_RETRYFAIL	-22
-//#define RSP_RETRY	-23
-//#define RSP_SKIP	-24
+#define RSP_RETRYFAIL	-22
+#define RSP_RETRY	-23
+#define RSP_SKIP	-24
 #define RSP_INIT	-27
 #define RSP_ANY		-26
 #define RSP_LAST	-28
@@ -127,7 +126,6 @@
 #define ACT_NOTIFY_BC_UP	39
 #define ACT_DIAL		40
 #define ACT_ACCEPT		41
-#define ACT_PROTO_L2		42
 #define ACT_HUP			43
 #define ACT_IF_LOCK		44
 #define ACT_START		45
@@ -159,229 +157,229 @@
 #define SEQ_UMMODE	11
 
 
-// 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid), 400: hup, 500: reset, 600: dial, 700: ring
+/* 100: init, 200: dle0, 250:dle1, 300: get cid (dial), 350: "hup" (no cid),
+ * 400: hup, 500: reset, 600: dial, 700: ring */
 struct reply_t gigaset_tab_nocid[] =
 {
-	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
+/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
+ * action, command */
 
-	/* initialize device, set cid mode if possible */
-	//{RSP_INIT,     -1, -1,100,                900, 0, {ACT_TEST}},
-	//{RSP_ERROR,   900,900, -1,                  0, 0, {ACT_FAILINIT}},
-	//{RSP_OK,      900,900, -1,                100, INIT_TIMEOUT,
-	//                                                  {ACT_TIMEOUT}},
+/* initialize device, set cid mode if possible */
+{RSP_INIT,	 -1,  -1, SEQ_INIT,		100,  1, {ACT_TIMEOUT} },
 
-	{RSP_INIT,     -1, -1,SEQ_INIT,           100, INIT_TIMEOUT,
-							  {ACT_TIMEOUT}},                /* wait until device is ready */
+{EV_TIMEOUT,	100, 100, -1,			101,  3, {0},	"Z\r"},
+{RSP_OK,	101, 103, -1,			120,  5, {ACT_GETSTRING},
+								"+GMR\r"},
 
-	{EV_TIMEOUT,  100,100, -1,                101, 3, {0},             "Z\r"},       /* device in transparent mode? try to initialize it. */
-	{RSP_OK,      101,103, -1,                120, 5, {ACT_GETSTRING}, "+GMR\r"},    /* get version */
+{EV_TIMEOUT,	101, 101, -1,			102,  5, {0},	"Z\r"},
+{RSP_ERROR,	101, 101, -1,			102,  5, {0},	"Z\r"},
 
-	{EV_TIMEOUT,  101,101, -1,                102, 5, {0},             "Z\r"},       /* timeout => try once again. */
-	{RSP_ERROR,   101,101, -1,                102, 5, {0},             "Z\r"},       /* error => try once again. */
+{EV_TIMEOUT,	102, 102, -1,			108,  5, {ACT_SETDLE1},
+								"^SDLE=0\r"},
+{RSP_OK,	108, 108, -1,			104, -1},
+{RSP_ZDLE,	104, 104,  0,			103,  5, {0},	"Z\r"},
+{EV_TIMEOUT,	104, 104, -1,			  0,  0, {ACT_FAILINIT} },
+{RSP_ERROR,	108, 108, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{EV_TIMEOUT,  102,102, -1,                108, 5, {ACT_SETDLE1},   "^SDLE=0\r"}, /* timeout => try again in DLE mode. */
-	{RSP_OK,      108,108, -1,                104,-1},
-	{RSP_ZDLE,    104,104,  0,                103, 5, {0},             "Z\r"},
-	{EV_TIMEOUT,  104,104, -1,                  0, 0, {ACT_FAILINIT}},
-	{RSP_ERROR,   108,108, -1,                  0, 0, {ACT_FAILINIT}},
+{EV_TIMEOUT,	108, 108, -1,			105,  2, {ACT_SETDLE0,
+							  ACT_HUPMODEM,
+							  ACT_TIMEOUT} },
+{EV_TIMEOUT,	105, 105, -1,			103,  5, {0},	"Z\r"},
 
-	{EV_TIMEOUT,  108,108, -1,                105, 2, {ACT_SETDLE0,
-							   ACT_HUPMODEM,
-							   ACT_TIMEOUT}},                /* still timeout => connection in unimodem mode? */
-	{EV_TIMEOUT,  105,105, -1,                103, 5, {0},             "Z\r"},
+{RSP_ERROR,	102, 102, -1,			107,  5, {0},	"^GETPRE\r"},
+{RSP_OK,	107, 107, -1,			  0,  0, {ACT_CONFIGMODE} },
+{RSP_ERROR,	107, 107, -1,			  0,  0, {ACT_FAILINIT} },
+{EV_TIMEOUT,	107, 107, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{RSP_ERROR,   102,102, -1,                107, 5, {0},             "^GETPRE\r"}, /* ERROR on ATZ => maybe in config mode? */
-	{RSP_OK,      107,107, -1,                  0, 0, {ACT_CONFIGMODE}},
-	{RSP_ERROR,   107,107, -1,                  0, 0, {ACT_FAILINIT}},
-	{EV_TIMEOUT,  107,107, -1,                  0, 0, {ACT_FAILINIT}},
+{RSP_ERROR,	103, 103, -1,			  0,  0, {ACT_FAILINIT} },
+{EV_TIMEOUT,	103, 103, -1,			  0,  0, {ACT_FAILINIT} },
 
-	{RSP_ERROR,   103,103, -1,                  0, 0, {ACT_FAILINIT}},
-	{EV_TIMEOUT,  103,103, -1,                  0, 0, {ACT_FAILINIT}},
+{RSP_STRING,	120, 120, -1,			121, -1, {ACT_SETVER} },
 
-	{RSP_STRING,  120,120, -1,                121,-1, {ACT_SETVER}},
+{EV_TIMEOUT,	120, 121, -1,			  0,  0, {ACT_FAILVER,
+							  ACT_INIT} },
+{RSP_ERROR,	120, 121, -1,			  0,  0, {ACT_FAILVER,
+							  ACT_INIT} },
+{RSP_OK,	121, 121, -1,			  0,  0, {ACT_GOTVER,
+							  ACT_INIT} },
 
-	{EV_TIMEOUT,  120,121, -1,                  0, 0, {ACT_FAILVER, ACT_INIT}},
-	{RSP_ERROR,   120,121, -1,                  0, 0, {ACT_FAILVER, ACT_INIT}},
-	{RSP_OK,      121,121, -1,                  0, 0, {ACT_GOTVER,  ACT_INIT}},
+/* leave dle mode */
+{RSP_INIT,	  0,   0, SEQ_DLE0,		201,  5, {0},	"^SDLE=0\r"},
+{RSP_OK,	201, 201, -1,			202, -1},
+{RSP_ZDLE,	202, 202,  0,			  0,  0, {ACT_DLE0} },
+{RSP_NODEV,	200, 249, -1,			  0,  0, {ACT_FAKEDLE0} },
+{RSP_ERROR,	200, 249, -1,			  0,  0, {ACT_FAILDLE0} },
+{EV_TIMEOUT,	200, 249, -1,			  0,  0, {ACT_FAILDLE0} },
 
-	/* leave dle mode */
-	{RSP_INIT,      0,  0,SEQ_DLE0,           201, 5, {0},             "^SDLE=0\r"},
-	{RSP_OK,      201,201, -1,                202,-1},
-	{RSP_ZDLE,    202,202,  0,                  0, 0, {ACT_DLE0}},
-	{RSP_NODEV,   200,249, -1,                  0, 0, {ACT_FAKEDLE0}},
-	{RSP_ERROR,   200,249, -1,                  0, 0, {ACT_FAILDLE0}},
-	{EV_TIMEOUT,  200,249, -1,                  0, 0, {ACT_FAILDLE0}},
+/* enter dle mode */
+{RSP_INIT,	  0,   0, SEQ_DLE1,		251,  5, {0},	"^SDLE=1\r"},
+{RSP_OK,	251, 251, -1,			252, -1},
+{RSP_ZDLE,	252, 252,  1,			  0,  0, {ACT_DLE1} },
+{RSP_ERROR,	250, 299, -1,			  0,  0, {ACT_FAILDLE1} },
+{EV_TIMEOUT,	250, 299, -1,			  0,  0, {ACT_FAILDLE1} },
 
-	/* enter dle mode */
-	{RSP_INIT,      0,  0,SEQ_DLE1,           251, 5, {0},             "^SDLE=1\r"},
-	{RSP_OK,      251,251, -1,                252,-1},
-	{RSP_ZDLE,    252,252,  1,                  0, 0, {ACT_DLE1}},
-	{RSP_ERROR,   250,299, -1,                  0, 0, {ACT_FAILDLE1}},
-	{EV_TIMEOUT,  250,299, -1,                  0, 0, {ACT_FAILDLE1}},
+/* incoming call */
+{RSP_RING,	 -1,  -1, -1,			 -1, -1, {ACT_RING} },
 
-	/* incoming call */
-	{RSP_RING,     -1, -1, -1,                 -1,-1, {ACT_RING}},
+/* get cid */
+{RSP_INIT,	  0,   0, SEQ_CID,		301,  5, {0},	"^SGCI?\r"},
+{RSP_OK,	301, 301, -1,			302, -1},
+{RSP_ZGCI,	302, 302, -1,			  0,  0, {ACT_CID} },
+{RSP_ERROR,	301, 349, -1,			  0,  0, {ACT_FAILCID} },
+{EV_TIMEOUT,	301, 349, -1,			  0,  0, {ACT_FAILCID} },
 
-	/* get cid */
-	//{RSP_INIT,      0,  0,300,                901, 0, {ACT_TEST}},
-	//{RSP_ERROR,   901,901, -1,                  0, 0, {ACT_FAILCID}},
-	//{RSP_OK,      901,901, -1,                301, 5, {0},             "^SGCI?\r"},
+/* enter cid mode */
+{RSP_INIT,	  0,   0, SEQ_CIDMODE,		150,  5, {0},	"^SGCI=1\r"},
+{RSP_OK,	150, 150, -1,			  0,  0, {ACT_CMODESET} },
+{RSP_ERROR,	150, 150, -1,			  0,  0, {ACT_FAILCMODE} },
+{EV_TIMEOUT,	150, 150, -1,			  0,  0, {ACT_FAILCMODE} },
 
-	{RSP_INIT,      0,  0,SEQ_CID,            301, 5, {0},             "^SGCI?\r"},
-	{RSP_OK,      301,301, -1,                302,-1},
-	{RSP_ZGCI,    302,302, -1,                  0, 0, {ACT_CID}},
-	{RSP_ERROR,   301,349, -1,                  0, 0, {ACT_FAILCID}},
-	{EV_TIMEOUT,  301,349, -1,                  0, 0, {ACT_FAILCID}},
+/* leave cid mode */
+{RSP_INIT,	  0,   0, SEQ_UMMODE,		160,  5, {0},	"Z\r"},
+{RSP_OK,	160, 160, -1,			  0,  0, {ACT_UMODESET} },
+{RSP_ERROR,	160, 160, -1,			  0,  0, {ACT_FAILUMODE} },
+{EV_TIMEOUT,	160, 160, -1,			  0,  0, {ACT_FAILUMODE} },
 
-	/* enter cid mode */
-	{RSP_INIT,      0,  0,SEQ_CIDMODE,        150, 5, {0},             "^SGCI=1\r"},
-	{RSP_OK,      150,150, -1,                  0, 0, {ACT_CMODESET}},
-	{RSP_ERROR,   150,150, -1,                  0, 0, {ACT_FAILCMODE}},
-	{EV_TIMEOUT,  150,150, -1,                  0, 0, {ACT_FAILCMODE}},
+/* abort getting cid */
+{RSP_INIT,	  0,   0, SEQ_NOCID,		  0,  0, {ACT_ABORTCID} },
 
-	/* leave cid mode */
-	//{RSP_INIT,      0,  0,SEQ_UMMODE,         160, 5, {0},             "^SGCI=0\r"},
-	{RSP_INIT,      0,  0,SEQ_UMMODE,         160, 5, {0},             "Z\r"},
-	{RSP_OK,      160,160, -1,                  0, 0, {ACT_UMODESET}},
-	{RSP_ERROR,   160,160, -1,                  0, 0, {ACT_FAILUMODE}},
-	{EV_TIMEOUT,  160,160, -1,                  0, 0, {ACT_FAILUMODE}},
+/* reset */
+{RSP_INIT,	  0,   0, SEQ_SHUTDOWN,		504,  5, {0},	"Z\r"},
+{RSP_OK,	504, 504, -1,			  0,  0, {ACT_SDOWN} },
+{RSP_ERROR,	501, 599, -1,			  0,  0, {ACT_FAILSDOWN} },
+{EV_TIMEOUT,	501, 599, -1,			  0,  0, {ACT_FAILSDOWN} },
+{RSP_NODEV,	501, 599, -1,			  0,  0, {ACT_FAKESDOWN} },
 
-	/* abort getting cid */
-	{RSP_INIT,      0,  0,SEQ_NOCID,            0, 0, {ACT_ABORTCID}},
+{EV_PROC_CIDMODE, -1, -1, -1,			 -1, -1, {ACT_PROC_CIDMODE} },
+{EV_IF_LOCK,	 -1,  -1, -1,			 -1, -1, {ACT_IF_LOCK} },
+{EV_IF_VER,	 -1,  -1, -1,			 -1, -1, {ACT_IF_VER} },
+{EV_START,	 -1,  -1, -1,			 -1, -1, {ACT_START} },
+{EV_STOP,	 -1,  -1, -1,			 -1, -1, {ACT_STOP} },
+{EV_SHUTDOWN,	 -1,  -1, -1,			 -1, -1, {ACT_SHUTDOWN} },
 
-	/* reset */
-	{RSP_INIT,      0,  0,SEQ_SHUTDOWN,       504, 5, {0},             "Z\r"},
-	{RSP_OK,      504,504, -1,                  0, 0, {ACT_SDOWN}},
-	{RSP_ERROR,   501,599, -1,                  0, 0, {ACT_FAILSDOWN}},
-	{EV_TIMEOUT,  501,599, -1,                  0, 0, {ACT_FAILSDOWN}},
-	{RSP_NODEV,   501,599, -1,                  0, 0, {ACT_FAKESDOWN}},
+/* misc. */
+{RSP_ERROR,	 -1,  -1, -1,			 -1, -1, {ACT_ERROR} },
+{RSP_ZCFGT,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCFG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZLOG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZMWI,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZABINFO,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZSMLSTCHG,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
 
-	{EV_PROC_CIDMODE,-1, -1, -1,               -1,-1, {ACT_PROC_CIDMODE}}, //FIXME
-	{EV_IF_LOCK,   -1, -1, -1,                 -1,-1, {ACT_IF_LOCK}}, //FIXME
-	{EV_IF_VER,    -1, -1, -1,                 -1,-1, {ACT_IF_VER}}, //FIXME
-	{EV_START,     -1, -1, -1,                 -1,-1, {ACT_START}}, //FIXME
-	{EV_STOP,      -1, -1, -1,                 -1,-1, {ACT_STOP}}, //FIXME
-	{EV_SHUTDOWN,  -1, -1, -1,                 -1,-1, {ACT_SHUTDOWN}}, //FIXME
-
-	/* misc. */
-	{RSP_ERROR,    -1, -1, -1,                 -1, -1, {ACT_ERROR} },
-	{RSP_EMPTY,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCFGT,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCFG,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZLOG,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZMWI,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZABINFO,  -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZSMLSTCHG,-1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-
-	{RSP_ZCAU,     -1, -1, -1,                 -1,-1, {ACT_ZCAU}},
-	{RSP_NONE,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ANY,      -1, -1, -1,                 -1,-1, {ACT_WARN}},
-	{RSP_LAST}
+{RSP_ZCAU,	 -1,  -1, -1,			 -1, -1, {ACT_ZCAU} },
+{RSP_NONE,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ANY,	 -1,  -1, -1,			 -1, -1, {ACT_WARN} },
+{RSP_LAST}
 };
 
-// 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring, 400: hup, 750: accepted icall
+/* 600: start dialing, 650: dial in progress, 800: connection is up, 700: ring,
+ * 400: hup, 750: accepted icall */
 struct reply_t gigaset_tab_cid[] =
 {
-	/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout, action, command */
+/* resp_code, min_ConState, max_ConState, parameter, new_ConState, timeout,
+ * action, command */
 
-	/* dial */
-	{EV_DIAL,      -1, -1, -1,                 -1,-1, {ACT_DIAL}}, //FIXME
-	{RSP_INIT,      0,  0,SEQ_DIAL,           601, 5, {ACT_CMD+AT_BC}},
-	{RSP_OK,      601,601, -1,                602, 5, {ACT_CMD+AT_HLC}},
-	{RSP_NULL,    602,602, -1,                603, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      602,602, -1,                603, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      603,603, -1,                604, 5, {ACT_CMD+AT_TYPE}},
-	{RSP_OK,      604,604, -1,                605, 5, {ACT_CMD+AT_MSN}},
-	{RSP_OK,      605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_NULL,    605,605, -1,                606, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      606,606, -1,                607, 5, {0}, "+VLS=17\r"},
-	{RSP_OK,      607,607, -1,                608,-1},
-	{RSP_ZSAU,    608,608,ZSAU_PROCEEDING,    609, 5, {ACT_CMD+AT_DIAL}},
-	{RSP_OK,      609,609, -1,                650, 0, {ACT_DIALING}},
+/* dial */
+{EV_DIAL,	 -1,  -1, -1,			 -1, -1, {ACT_DIAL} },
+{RSP_INIT,	  0,   0, SEQ_DIAL,		601,  5, {ACT_CMD+AT_BC} },
+{RSP_OK,	601, 601, -1,			602,  5, {ACT_CMD+AT_HLC} },
+{RSP_NULL,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	602, 602, -1,			603,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	603, 603, -1,			604,  5, {ACT_CMD+AT_TYPE} },
+{RSP_OK,	604, 604, -1,			605,  5, {ACT_CMD+AT_MSN} },
+{RSP_NULL,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
+{RSP_OK,	605, 605, -1,			606,  5, {ACT_CMD+AT_CLIP} },
+{RSP_NULL,	606, 606, -1,			607,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	606, 606, -1,			607,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	607, 607, -1,			608,  5, {0},	"+VLS=17\r"},
+{RSP_OK,	608, 608, -1,			609, -1},
+{RSP_ZSAU,	609, 609, ZSAU_PROCEEDING,	610,  5, {ACT_CMD+AT_DIAL} },
+{RSP_OK,	610, 610, -1,			650,  0, {ACT_DIALING} },
 
-	{RSP_ERROR,   601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
-	{EV_TIMEOUT,  601,609, -1,                  0, 0, {ACT_ABORTDIAL}},
+{RSP_ERROR,	601, 610, -1,			  0,  0, {ACT_ABORTDIAL} },
+{EV_TIMEOUT,	601, 610, -1,			  0,  0, {ACT_ABORTDIAL} },
 
-	/* optional dialing responses */
-	{EV_BC_OPEN,  650,650, -1,                651,-1},
-	{RSP_ZVLS,    608,651, 17,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCTP,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZCPN,    609,651, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ZSAU,    650,651,ZSAU_CALL_DELIVERED, -1,-1, {ACT_DEBUG}},
+/* optional dialing responses */
+{EV_BC_OPEN,	650, 650, -1,			651, -1},
+{RSP_ZVLS,	609, 651, 17,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCTP,	610, 651, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCPN,	610, 651, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZSAU,	650, 651, ZSAU_CALL_DELIVERED,	 -1, -1, {ACT_DEBUG} },
 
-	/* connect */
-	{RSP_ZSAU,    650,650,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
-	{RSP_ZSAU,    651,651,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
-							   ACT_NOTIFY_BC_UP}},
-	{RSP_ZSAU,    750,750,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT}},
-	{RSP_ZSAU,    751,751,ZSAU_ACTIVE,        800,-1, {ACT_CONNECT,
-							   ACT_NOTIFY_BC_UP}},
-	{EV_BC_OPEN,  800,800, -1,                800,-1, {ACT_NOTIFY_BC_UP}},
+/* connect */
+{RSP_ZSAU,	650, 650, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT} },
+{RSP_ZSAU,	651, 651, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT,
+							  ACT_NOTIFY_BC_UP} },
+{RSP_ZSAU,	750, 750, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT} },
+{RSP_ZSAU,	751, 751, ZSAU_ACTIVE,		800, -1, {ACT_CONNECT,
+							  ACT_NOTIFY_BC_UP} },
+{EV_BC_OPEN,	800, 800, -1,			800, -1, {ACT_NOTIFY_BC_UP} },
 
-	/* remote hangup */
-	{RSP_ZSAU,    650,651,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEREJECT}},
-	{RSP_ZSAU,    750,751,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
-	{RSP_ZSAU,    800,800,ZSAU_DISCONNECT_IND,  0, 0, {ACT_REMOTEHUP}},
+/* remote hangup */
+{RSP_ZSAU,	650, 651, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEREJECT} },
+{RSP_ZSAU,	750, 751, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEHUP} },
+{RSP_ZSAU,	800, 800, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_REMOTEHUP} },
 
-	/* hangup */
-	{EV_HUP,       -1, -1, -1,                 -1,-1, {ACT_HUP}}, //FIXME
-	{RSP_INIT,     -1, -1,SEQ_HUP,            401, 5, {0},             "+VLS=0\r"}, /* hang up */ //-1,-1?
-	{RSP_OK,      401,401, -1,                402, 5},
-	{RSP_ZVLS,    402,402,  0,                403, 5},
-	{RSP_ZSAU,    403, 403, ZSAU_DISCONNECT_REQ, -1, -1, {ACT_DEBUG} },
-	{RSP_ZSAU,    403, 403, ZSAU_NULL,            0,  0, {ACT_DISCONNECT} },
-	{RSP_NODEV,   401, 403, -1,                   0,  0, {ACT_FAKEHUP} },
-	{RSP_ERROR,   401,401, -1,                  0, 0, {ACT_ABORTHUP}},
-	{EV_TIMEOUT,  401,403, -1,                  0, 0, {ACT_ABORTHUP}},
+/* hangup */
+{EV_HUP,	 -1,  -1, -1,			 -1, -1, {ACT_HUP} },
+{RSP_INIT,	 -1,  -1, SEQ_HUP,		401,  5, {0},	"+VLS=0\r"},
+{RSP_OK,	401, 401, -1,			402,  5},
+{RSP_ZVLS,	402, 402,  0,			403,  5},
+{RSP_ZSAU,	403, 403, ZSAU_DISCONNECT_REQ,	 -1, -1, {ACT_DEBUG} },
+{RSP_ZSAU,	403, 403, ZSAU_NULL,		  0,  0, {ACT_DISCONNECT} },
+{RSP_NODEV,	401, 403, -1,			  0,  0, {ACT_FAKEHUP} },
+{RSP_ERROR,	401, 401, -1,			  0,  0, {ACT_ABORTHUP} },
+{EV_TIMEOUT,	401, 403, -1,			  0,  0, {ACT_ABORTHUP} },
 
-	{EV_BC_CLOSED,  0,  0, -1,                  0,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME new constate + timeout
+{EV_BC_CLOSED,	  0,   0, -1,			  0, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/* ring */
-	{RSP_ZBC,     700,700, -1,                 -1,-1, {0}},
-	{RSP_ZHLC,    700,700, -1,                 -1,-1, {0}},
-	{RSP_NMBR,    700,700, -1,                 -1,-1, {0}},
-	{RSP_ZCPN,    700,700, -1,                 -1,-1, {0}},
-	{RSP_ZCTP,    700,700, -1,                 -1,-1, {0}},
-	{EV_TIMEOUT,  700,700, -1,               720,720, {ACT_ICALL}},
-	{EV_BC_CLOSED,720,720, -1,                  0,-1, {ACT_NOTIFY_BC_DOWN}},
+/* ring */
+{RSP_ZBC,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZHLC,	700, 700, -1,			 -1, -1, {0} },
+{RSP_NMBR,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZCPN,	700, 700, -1,			 -1, -1, {0} },
+{RSP_ZCTP,	700, 700, -1,			 -1, -1, {0} },
+{EV_TIMEOUT,	700, 700, -1,			720, 720, {ACT_ICALL} },
+{EV_BC_CLOSED,	720, 720, -1,			  0, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/*accept icall*/
-	{EV_ACCEPT,    -1, -1, -1,                 -1,-1, {ACT_ACCEPT}}, //FIXME
-	{RSP_INIT,    720,720,SEQ_ACCEPT,         721, 5, {ACT_CMD+AT_PROTO}},
-	{RSP_OK,      721,721, -1,                722, 5, {ACT_CMD+AT_ISO}},
-	{RSP_OK,      722,722, -1,                723, 5, {0},             "+VLS=17\r"}, /* set "Endgeraetemodus" */
-	{RSP_OK,      723,723, -1,                724, 5, {0}},
-	{RSP_ZVLS,    724,724, 17,                750,50, {ACT_ACCEPTED}},
-	{RSP_ERROR,   721,729, -1,                  0, 0, {ACT_ABORTACCEPT}},
-	{EV_TIMEOUT,  721,729, -1,                  0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_NULL,            0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_ACTIVE,          0, 0, {ACT_ABORTACCEPT}},
-	{RSP_ZSAU,    700,729,ZSAU_DISCONNECT_IND,  0, 0, {ACT_ABORTACCEPT}},
+/*accept icall*/
+{EV_ACCEPT,	 -1,  -1, -1,			 -1, -1, {ACT_ACCEPT} },
+{RSP_INIT,	720, 720, SEQ_ACCEPT,		721,  5, {ACT_CMD+AT_PROTO} },
+{RSP_OK,	721, 721, -1,			722,  5, {ACT_CMD+AT_ISO} },
+{RSP_OK,	722, 722, -1,			723,  5, {0},	"+VLS=17\r"},
+{RSP_OK,	723, 723, -1,			724,  5, {0} },
+{RSP_ZVLS,	724, 724, 17,			750, 50, {ACT_ACCEPTED} },
+{RSP_ERROR,	721, 729, -1,			  0,  0, {ACT_ABORTACCEPT} },
+{EV_TIMEOUT,	721, 729, -1,			  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_NULL,		  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_ACTIVE,		  0,  0, {ACT_ABORTACCEPT} },
+{RSP_ZSAU,	700, 729, ZSAU_DISCONNECT_IND,	  0,  0, {ACT_ABORTACCEPT} },
 
-	{EV_BC_OPEN,  750,750, -1,                751,-1},
-	{EV_TIMEOUT,  750,751, -1,                  0, 0, {ACT_CONNTIMEOUT}},
+{EV_BC_OPEN,	750, 750, -1,			751, -1},
+{EV_TIMEOUT,	750, 751, -1,			  0,  0, {ACT_CONNTIMEOUT} },
 
-	/* B channel closed (general case) */
-	{EV_BC_CLOSED, -1, -1, -1,                 -1,-1, {ACT_NOTIFY_BC_DOWN}}, //FIXME
+/* B channel closed (general case) */
+{EV_BC_CLOSED,	 -1,  -1, -1,			 -1, -1, {ACT_NOTIFY_BC_DOWN} },
 
-	/* misc. */
-	{EV_PROTO_L2,  -1, -1, -1,                 -1,-1, {ACT_PROTO_L2}}, //FIXME
+/* misc. */
+{RSP_ZCON,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCCR,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZAOC,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ZCSTR,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
 
-	{RSP_ZCON,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCCR,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZAOC,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-	{RSP_ZCSTR,    -1, -1, -1,                 -1,-1, {ACT_DEBUG}}, //FIXME
-
-	{RSP_ZCAU,     -1, -1, -1,                 -1,-1, {ACT_ZCAU}},
-	{RSP_NONE,     -1, -1, -1,                 -1,-1, {ACT_DEBUG}},
-	{RSP_ANY,      -1, -1, -1,                 -1,-1, {ACT_WARN}},
-	{RSP_LAST}
+{RSP_ZCAU,	 -1,  -1, -1,			 -1, -1, {ACT_ZCAU} },
+{RSP_NONE,	 -1,  -1, -1,			 -1, -1, {ACT_DEBUG} },
+{RSP_ANY,	 -1,  -1, -1,			 -1, -1, {ACT_WARN} },
+{RSP_LAST}
 };
 
 
-static const struct resp_type_t resp_type[] =
+static const struct resp_type_t {
+	unsigned char	*response;
+	int		resp_code;
+	int		type;
+} resp_type[] =
 {
-	/*{"",		RSP_EMPTY,	RT_NOTHING},*/
 	{"OK",		RSP_OK,		RT_NOTHING},
 	{"ERROR",	RSP_ERROR,	RT_NOTHING},
 	{"ZSAU",	RSP_ZSAU,	RT_ZSAU},
@@ -405,7 +403,21 @@
 	{"ZLOG",	RSP_ZLOG,	RT_NOTHING},
 	{"ZABINFO",	RSP_ZABINFO,	RT_NOTHING},
 	{"ZSMLSTCHG",	RSP_ZSMLSTCHG,	RT_NOTHING},
-	{NULL,0,0}
+	{NULL,		0,		0}
+};
+
+static const struct zsau_resp_t {
+	unsigned char	*str;
+	int		code;
+} zsau_resp[] =
+{
+	{"OUTGOING_CALL_PROCEEDING",	ZSAU_OUTGOING_CALL_PROCEEDING},
+	{"CALL_DELIVERED",		ZSAU_CALL_DELIVERED},
+	{"ACTIVE",			ZSAU_ACTIVE},
+	{"DISCONNECT_IND",		ZSAU_DISCONNECT_IND},
+	{"NULL",			ZSAU_NULL},
+	{"DISCONNECT_REQ",		ZSAU_DISCONNECT_REQ},
+	{NULL,				ZSAU_UNKNOWN}
 };
 
 /*
@@ -470,7 +482,6 @@
 	if (cid < 1 || cid > 65535)
 		return -1;	/* CID out of range */
 	return cid;
-	//FIXME is ;<digit>+ at end of non-CID response really impossible?
 }
 
 /**
@@ -487,6 +498,7 @@
 	int params;
 	int i, j;
 	const struct resp_type_t *rt;
+	const struct zsau_resp_t *zr;
 	int curarg;
 	unsigned long flags;
 	unsigned next, tail, head;
@@ -613,24 +625,14 @@
 				event->parameter = ZSAU_NONE;
 				break;
 			}
-			if (!strcmp(argv[curarg], "OUTGOING_CALL_PROCEEDING"))
-				event->parameter = ZSAU_OUTGOING_CALL_PROCEEDING;
-			else if (!strcmp(argv[curarg], "CALL_DELIVERED"))
-				event->parameter = ZSAU_CALL_DELIVERED;
-			else if (!strcmp(argv[curarg], "ACTIVE"))
-				event->parameter = ZSAU_ACTIVE;
-			else if (!strcmp(argv[curarg], "DISCONNECT_IND"))
-				event->parameter = ZSAU_DISCONNECT_IND;
-			else if (!strcmp(argv[curarg], "NULL"))
-				event->parameter = ZSAU_NULL;
-			else if (!strcmp(argv[curarg], "DISCONNECT_REQ"))
-				event->parameter = ZSAU_DISCONNECT_REQ;
-			else {
-				event->parameter = ZSAU_UNKNOWN;
+			for (zr = zsau_resp; zr->str; ++zr)
+				if (!strcmp(argv[curarg], zr->str))
+					break;
+			event->parameter = zr->code;
+			if (!zr->str)
 				dev_warn(cs->dev,
 					"%s: unknown parameter %s after ZSAU\n",
 					 __func__, argv[curarg]);
-			}
 			++curarg;
 			break;
 		case RT_STRING:
@@ -714,7 +716,7 @@
 		/* notify LL */
 		if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
 			bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-			gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+			gigaset_isdn_hupD(bcs);
 		}
 	} else {
 		/* no B channel assigned: just deallocate */
@@ -872,12 +874,12 @@
 {
 	if (bcs->chstate & CHS_B_UP) {
 		bcs->chstate &= ~CHS_B_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP);
+		gigaset_isdn_hupB(bcs);
 	}
 
 	if (bcs->chstate & (CHS_D_UP | CHS_NOTIFY_LL)) {
 		bcs->chstate &= ~(CHS_D_UP | CHS_NOTIFY_LL);
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+		gigaset_isdn_hupD(bcs);
 	}
 
 	gigaset_free_channel(bcs);
@@ -894,15 +896,17 @@
 	}
 
 	bcs->chstate |= CHS_B_UP;
-	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN);
+	gigaset_isdn_connB(bcs);
 }
 
-static void start_dial(struct at_state_t *at_state, void *data, unsigned seq_index)
+static void start_dial(struct at_state_t *at_state, void *data,
+			unsigned seq_index)
 {
 	struct bc_state *bcs = at_state->bcs;
 	struct cardstate *cs = at_state->cs;
-	int retval;
+	char **commands = data;
 	unsigned long flags;
+	int i;
 
 	bcs->chstate |= CHS_NOTIFY_LL;
 
@@ -913,10 +917,10 @@
 	}
 	spin_unlock_irqrestore(&cs->lock, flags);
 
-	retval = gigaset_isdn_setup_dial(at_state, data);
-	if (retval != 0)
-		goto error;
-
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(bcs->commands[i]);
+		bcs->commands[i] = commands[i];
+	}
 
 	at_state->pending_commands |= PC_CID;
 	gig_dbg(DEBUG_CMD, "Scheduling PC_CID");
@@ -924,6 +928,10 @@
 	return;
 
 error:
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(commands[i]);
+		commands[i] = NULL;
+	}
 	at_state->pending_commands |= PC_NOCID;
 	gig_dbg(DEBUG_CMD, "Scheduling PC_NOCID");
 	cs->commands_pending = 1;
@@ -933,20 +941,31 @@
 static void start_accept(struct at_state_t *at_state)
 {
 	struct cardstate *cs = at_state->cs;
-	int retval;
+	struct bc_state *bcs = at_state->bcs;
+	int i;
 
-	retval = gigaset_isdn_setup_accept(at_state);
+	for (i = 0; i < AT_NUM; ++i) {
+		kfree(bcs->commands[i]);
+		bcs->commands[i] = NULL;
+	}
 
-	if (retval == 0) {
-		at_state->pending_commands |= PC_ACCEPT;
-		gig_dbg(DEBUG_CMD, "Scheduling PC_ACCEPT");
-		cs->commands_pending = 1;
-	} else {
+	bcs->commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
+	bcs->commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
+	if (!bcs->commands[AT_PROTO] || !bcs->commands[AT_ISO]) {
+		dev_err(at_state->cs->dev, "out of memory\n");
 		/* error reset */
 		at_state->pending_commands |= PC_HUP;
 		gig_dbg(DEBUG_CMD, "Scheduling PC_HUP");
 		cs->commands_pending = 1;
+		return;
 	}
+
+	snprintf(bcs->commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+	snprintf(bcs->commands[AT_ISO], 9, "^SISO=%u\r", bcs->channel + 1);
+
+	at_state->pending_commands |= PC_ACCEPT;
+	gig_dbg(DEBUG_CMD, "Scheduling PC_ACCEPT");
+	cs->commands_pending = 1;
 }
 
 static void do_start(struct cardstate *cs)
@@ -957,9 +976,7 @@
 		schedule_init(cs, MS_INIT);
 
 	cs->isdn_up = 1;
-	gigaset_i4l_cmd(cs, ISDN_STAT_RUN);
-					// FIXME: not in locked mode
-					// FIXME 2: only after init sequence
+	gigaset_isdn_start(cs);
 
 	cs->waiting = 0;
 	wake_up(&cs->waitqueue);
@@ -975,7 +992,7 @@
 	/* Tell the LL that the device is not available .. */
 	if (cs->isdn_up) {
 		cs->isdn_up = 0;
-		gigaset_i4l_cmd(cs, ISDN_STAT_STOP);
+		gigaset_isdn_stop(cs);
 	}
 
 	/* The rest is done by cleanup_cs () in user mode. */
@@ -1113,7 +1130,6 @@
 
 		break;
 	case MS_LOCKED:
-		//retval = -EACCES;
 		break;
 	default:
 		return -EBUSY;
@@ -1276,7 +1292,7 @@
 			break;
 		}
 		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+		gigaset_isdn_connD(bcs);
 		cs->ops->init_bchannel(bcs);
 		break;
 	case ACT_DLE1:
@@ -1284,7 +1300,7 @@
 		bcs = cs->bcs + cs->curchannel;
 
 		bcs->chstate |= CHS_D_UP;
-		gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+		gigaset_isdn_connD(bcs);
 		cs->ops->init_bchannel(bcs);
 		break;
 	case ACT_FAKEHUP:
@@ -1369,7 +1385,7 @@
 		cs->cur_at_seq = SEQ_NONE;
 		break;
 
-	case ACT_ABORTACCEPT:	/* hangup/error/timeout during ICALL processing */
+	case ACT_ABORTACCEPT:	/* hangup/error/timeout during ICALL procssng */
 		disconnect(p_at_state);
 		break;
 
@@ -1443,17 +1459,6 @@
 			__func__, at_state->ConState);
 		cs->cur_at_seq = SEQ_NONE;
 		break;
-#ifdef CONFIG_GIGASET_DEBUG
-	case ACT_TEST:
-		{
-			static int count = 3; //2; //1;
-			*p_genresp = 1;
-			*p_resp_code = count ? RSP_ERROR : RSP_OK;
-			if (count > 0)
-				--count;
-		}
-		break;
-#endif
 	case ACT_DEBUG:
 		gig_dbg(DEBUG_ANY, "%s: resp_code %d in ConState %d",
 			__func__, ev->type, at_state->ConState);
@@ -1474,11 +1479,6 @@
 	case ACT_ACCEPT:
 		start_accept(at_state);
 		break;
-	case ACT_PROTO_L2:
-		gig_dbg(DEBUG_CMD, "set protocol to %u",
-			(unsigned) ev->parameter);
-		at_state->bcs->proto2 = ev->parameter;
-		break;
 	case ACT_HUP:
 		at_state->pending_commands |= PC_HUP;
 		cs->commands_pending = 1;
@@ -1493,7 +1493,7 @@
 		do_start(cs);
 		break;
 
-	/* events from the interface */ // FIXME without ACT_xxxx?
+	/* events from the interface */
 	case ACT_IF_LOCK:
 		cs->cmd_result = ev->parameter ? do_lock(cs) : do_unlock(cs);
 		cs->waiting = 0;
@@ -1512,7 +1512,7 @@
 		wake_up(&cs->waitqueue);
 		break;
 
-	/* events from the proc file system */ // FIXME without ACT_xxxx?
+	/* events from the proc file system */
 	case ACT_PROC_CIDMODE:
 		spin_lock_irqsave(&cs->lock, flags);
 		if (ev->parameter != cs->cidmode) {
@@ -1649,7 +1649,8 @@
 	for (curact = 0; curact < MAXACT; ++curact) {
 		/* The row tells us what we should do  ..
 		 */
-		do_action(rep->action[curact], cs, bcs, &at_state, &p_command, &genresp, &resp_code, ev);
+		do_action(rep->action[curact], cs, bcs, &at_state, &p_command,
+			  &genresp, &resp_code, ev);
 		if (!at_state)
 			break; /* may be freed after disconnect */
 	}
@@ -1661,13 +1662,14 @@
 
 		if (genresp) {
 			spin_lock_irqsave(&cs->lock, flags);
-			at_state->timer_expires = 0; //FIXME
-			at_state->timer_active = 0; //FIXME
+			at_state->timer_expires = 0;
+			at_state->timer_active = 0;
 			spin_unlock_irqrestore(&cs->lock, flags);
-			gigaset_add_event(cs, at_state, resp_code, NULL, 0, NULL);
+			gigaset_add_event(cs, at_state, resp_code,
+					  NULL, 0, NULL);
 		} else {
 			/* Send command to modem if not NULL... */
-			if (p_command/*rep->command*/) {
+			if (p_command) {
 				if (cs->connected)
 					send_command(cs, p_command,
 						     sendcid, cs->dle,
@@ -1754,7 +1756,8 @@
 		}
 	}
 
-	/* only switch back to unimodem mode, if no commands are pending and no channels are up */
+	/* only switch back to unimodem mode if no commands are pending and
+	 * no channels are up */
 	spin_lock_irqsave(&cs->lock, flags);
 	if (cs->at_state.pending_commands == PC_UMMODE
 	    && !cs->cidmode
@@ -1813,9 +1816,8 @@
 
 	if (cs->at_state.pending_commands & PC_INIT) {
 		cs->at_state.pending_commands &= ~PC_INIT;
-		cs->dle = 0; //FIXME
+		cs->dle = 0;
 		cs->inbuf->inputstate = INS_command;
-		//FIXME reset card state (or -> LOCK0)?
 		schedule_sequence(cs, &cs->at_state, SEQ_INIT);
 		return;
 	}
diff --git a/drivers/isdn/gigaset/gigaset.h b/drivers/isdn/gigaset/gigaset.h
index a2f6125..e963a6c 100644
--- a/drivers/isdn/gigaset/gigaset.h
+++ b/drivers/isdn/gigaset/gigaset.h
@@ -23,7 +23,6 @@
 #include <linux/compiler.h>
 #include <linux/types.h>
 #include <linux/spinlock.h>
-#include <linux/isdnif.h>
 #include <linux/usb.h>
 #include <linux/skbuff.h>
 #include <linux/netdevice.h>
@@ -35,12 +34,11 @@
 #include <linux/list.h>
 #include <asm/atomic.h>
 
-#define GIG_VERSION {0,5,0,0}
-#define GIG_COMPAT  {0,4,0,0}
+#define GIG_VERSION {0, 5, 0, 0}
+#define GIG_COMPAT  {0, 4, 0, 0}
 
 #define MAX_REC_PARAMS 10	/* Max. number of params in response string */
 #define MAX_RESP_SIZE 512	/* Max. size of a response string */
-#define HW_HDR_LEN 2		/* Header size used to store ack info */
 
 #define MAX_EVENTS 64		/* size of event queue */
 
@@ -135,35 +133,32 @@
 #define OUT_VENDOR_REQ	(USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
 #define IN_VENDOR_REQ	(USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_ENDPOINT)
 
-/* int-in-events 3070 */
+/* interrupt pipe messages */
 #define HD_B1_FLOW_CONTROL		0x80
 #define HD_B2_FLOW_CONTROL		0x81
-#define HD_RECEIVEATDATA_ACK		(0x35)		// 3070
-						// att: HD_RECEIVE>>AT<<DATA_ACK
-#define HD_READY_SEND_ATDATA		(0x36)		// 3070
-#define HD_OPEN_ATCHANNEL_ACK		(0x37)		// 3070
-#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		// 3070
-#define HD_DEVICE_INIT_OK		(0x11)		// ISurf USB + 3070
-#define HD_OPEN_B1CHANNEL_ACK		(0x51)		// ISurf USB + 3070
-#define HD_OPEN_B2CHANNEL_ACK		(0x52)		// ISurf USB + 3070
-#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		// ISurf USB + 3070
-#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		// ISurf USB + 3070
-// 	 Powermangment
-#define HD_SUSPEND_END			(0x61)		// ISurf USB
-//   Configuration
-#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		// ISurf USB + 3070
+#define HD_RECEIVEATDATA_ACK		(0x35)		/* 3070 */
+#define HD_READY_SEND_ATDATA		(0x36)		/* 3070 */
+#define HD_OPEN_ATCHANNEL_ACK		(0x37)		/* 3070 */
+#define HD_CLOSE_ATCHANNEL_ACK		(0x38)		/* 3070 */
+#define HD_DEVICE_INIT_OK		(0x11)		/* ISurf USB + 3070 */
+#define HD_OPEN_B1CHANNEL_ACK		(0x51)		/* ISurf USB + 3070 */
+#define HD_OPEN_B2CHANNEL_ACK		(0x52)		/* ISurf USB + 3070 */
+#define HD_CLOSE_B1CHANNEL_ACK		(0x53)		/* ISurf USB + 3070 */
+#define HD_CLOSE_B2CHANNEL_ACK		(0x54)		/* ISurf USB + 3070 */
+#define HD_SUSPEND_END			(0x61)		/* ISurf USB */
+#define HD_RESET_INTERRUPT_PIPE_ACK	(0xFF)		/* ISurf USB + 3070 */
 
-/* control requests 3070 */
-#define	HD_OPEN_B1CHANNEL		(0x23)		// ISurf USB + 3070
-#define	HD_CLOSE_B1CHANNEL		(0x24)		// ISurf USB + 3070
-#define	HD_OPEN_B2CHANNEL		(0x25)		// ISurf USB + 3070
-#define	HD_CLOSE_B2CHANNEL		(0x26)		// ISurf USB + 3070
-#define HD_RESET_INTERRUPT_PIPE		(0x27)		// ISurf USB + 3070
-#define	HD_DEVICE_INIT_ACK		(0x34)		// ISurf USB + 3070
-#define	HD_WRITE_ATMESSAGE		(0x12)		// 3070
-#define	HD_READ_ATMESSAGE		(0x13)		// 3070
-#define	HD_OPEN_ATCHANNEL		(0x28)		// 3070
-#define	HD_CLOSE_ATCHANNEL		(0x29)		// 3070
+/* control requests */
+#define	HD_OPEN_B1CHANNEL		(0x23)		/* ISurf USB + 3070 */
+#define	HD_CLOSE_B1CHANNEL		(0x24)		/* ISurf USB + 3070 */
+#define	HD_OPEN_B2CHANNEL		(0x25)		/* ISurf USB + 3070 */
+#define	HD_CLOSE_B2CHANNEL		(0x26)		/* ISurf USB + 3070 */
+#define HD_RESET_INTERRUPT_PIPE		(0x27)		/* ISurf USB + 3070 */
+#define	HD_DEVICE_INIT_ACK		(0x34)		/* ISurf USB + 3070 */
+#define	HD_WRITE_ATMESSAGE		(0x12)		/* 3070 */
+#define	HD_READ_ATMESSAGE		(0x13)		/* 3070 */
+#define	HD_OPEN_ATCHANNEL		(0x28)		/* 3070 */
+#define	HD_CLOSE_ATCHANNEL		(0x29)		/* 3070 */
 
 /* number of B channels supported by base driver */
 #define BAS_CHANNELS	2
@@ -193,7 +188,9 @@
 #define AT_PROTO	4
 #define AT_TYPE		5
 #define AT_HLC		6
-#define AT_NUM		7
+#define AT_CLIP		7
+/* total number */
+#define AT_NUM		8
 
 /* variables in struct at_state_t */
 #define VAR_ZSAU	0
@@ -216,7 +213,6 @@
 #define EV_START	-110
 #define EV_STOP		-111
 #define EV_IF_LOCK	-112
-#define EV_PROTO_L2	-113
 #define EV_ACCEPT	-114
 #define EV_DIAL		-115
 #define EV_HUP		-116
@@ -224,12 +220,11 @@
 #define EV_BC_CLOSED	-118
 
 /* input state */
-#define INS_command	0x0001
-#define INS_DLE_char	0x0002
+#define INS_command	0x0001	/* receiving messages (not payload data) */
+#define INS_DLE_char	0x0002	/* DLE flag received (in DLE mode) */
 #define INS_byte_stuff	0x0004
 #define INS_have_data	0x0008
-#define INS_skip_frame	0x0010
-#define INS_DLE_command	0x0020
+#define INS_DLE_command	0x0020	/* DLE message start (<DLE> X) received */
 #define INS_flag_hunt	0x0040
 
 /* channel state */
@@ -259,6 +254,11 @@
 #define SM_LOCKED	0
 #define SM_ISDN		1 /* default */
 
+/* layer 2 protocols (AT^SBPR=...) */
+#define L2_BITSYNC	0
+#define L2_HDLC		1
+#define L2_VOICE	2
+
 struct gigaset_ops;
 struct gigaset_driver;
 
@@ -286,8 +286,6 @@
 extern struct reply_t gigaset_tab_nocid[];
 
 struct inbuf_t {
-	unsigned char		*rcvbuf;	/* usb-gigaset receive buffer */
-	struct bc_state		*bcs;
 	struct cardstate	*cs;
 	int			inputstate;
 	int			head, tail;
@@ -359,12 +357,6 @@
 	struct bc_state		*bcs;
 };
 
-struct resp_type_t {
-	unsigned char	*response;
-	int		resp_code;	/* RSP_XXXX */
-	int		type;		/* RT_XXXX */
-};
-
 struct event_t {
 	int type;
 	void *ptr, *arg;
@@ -395,7 +387,7 @@
 
 	unsigned chstate;		/* bitmap (CHS_*) */
 	int ignore;
-	unsigned proto2;		/* Layer 2 protocol (ISDN_PROTO_L2_*) */
+	unsigned proto2;		/* layer 2 protocol (L2_*) */
 	char *commands[AT_NUM];		/* see AT_XXXX */
 
 #ifdef CONFIG_GIGASET_DEBUG
@@ -410,6 +402,8 @@
 		struct usb_bc_state *usb;	/* usb hardware driver (m105) */
 		struct bas_bc_state *bas;	/* usb hardware driver (base) */
 	} hw;
+
+	void *ap;			/* LL application structure */
 };
 
 struct cardstate {
@@ -456,12 +450,13 @@
 
 	unsigned running;		/* !=0 if events are handled */
 	unsigned connected;		/* !=0 if hardware is connected */
-	unsigned isdn_up;		/* !=0 after ISDN_STAT_RUN */
+	unsigned isdn_up;		/* !=0 after gigaset_isdn_start() */
 
 	unsigned cidmode;
 
 	int myid;			/* id for communication with LL */
-	isdn_if iif;
+	void *iif;			/* LL interface structure */
+	unsigned short hw_hdr_len;	/* headroom needed in data skbs */
 
 	struct reply_t *tabnocid;
 	struct reply_t *tabcid;
@@ -476,8 +471,8 @@
 
 	struct timer_list timer;
 	int retry_count;
-	int dle;			/* !=0 if modem commands/responses are
-					   dle encoded */
+	int dle;			/* !=0 if DLE mode is active
+					   (ZDLE=1 received -- M10x only) */
 	int cur_at_seq;			/* sequence of AT commands being
 					   processed */
 	int curchannel;			/* channel those commands are meant
@@ -616,7 +611,9 @@
 	int (*baud_rate)(struct cardstate *cs, unsigned cflag);
 	int (*set_line_ctrl)(struct cardstate *cs, unsigned cflag);
 
-	/* Called from i4l.c to put an skb into the send-queue. */
+	/* Called from LL interface to put an skb into the send-queue.
+	 * After sending is completed, gigaset_skb_sent() must be called
+	 * with the skb's link layer header preserved. */
 	int (*send_skb)(struct bc_state *bcs, struct sk_buff *skb);
 
 	/* Called from ev-layer.c to process a block of data
@@ -625,7 +622,8 @@
 
 };
 
-/* = Common structures and definitions ======================================= */
+/* = Common structures and definitions =======================================
+ */
 
 /* Parser states for DLE-Event:
  * <DLE-EVENT>: <DLE_FLAG> "X" <EVENT> <DLE_FLAG> "."
@@ -638,8 +636,7 @@
  *  Functions implemented in asyncdata.c
  */
 
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
 int gigaset_m10x_send_skb(struct bc_state *bcs, struct sk_buff *skb);
 
 /* Called from ev-layer.c to process a block of data
@@ -650,8 +647,7 @@
  *  Functions implemented in isocdata.c
  */
 
-/* Called from i4l.c to put an skb into the send-queue.
- * After sending gigaset_skb_sent() should be called. */
+/* Called from LL interface to put an skb into the send queue. */
 int gigaset_isoc_send_skb(struct bc_state *bcs, struct sk_buff *skb);
 
 /* Called from ev-layer.c to process a block of data
@@ -674,36 +670,26 @@
 int gigaset_isowbuf_getbytes(struct isowbuf_t *iwb, int size);
 
 /* ===========================================================================
- *  Functions implemented in i4l.c/gigaset.h
+ *  Functions implemented in LL interface
  */
 
-/* Called by gigaset_initcs() for setting up with the isdn4linux subsystem */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid);
+/* Called from common.c for setting up/shutting down with the ISDN subsystem */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid);
+void gigaset_isdn_unregister(struct cardstate *cs);
 
-/* Called from xxx-gigaset.c to indicate completion of sending an skb */
+/* Called from hardware module to indicate completion of an skb */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb);
+void gigaset_isdn_rcv_err(struct bc_state *bcs);
 
 /* Called from common.c/ev-layer.c to indicate events relevant to the LL */
+void gigaset_isdn_start(struct cardstate *cs);
+void gigaset_isdn_stop(struct cardstate *cs);
 int gigaset_isdn_icall(struct at_state_t *at_state);
-int gigaset_isdn_setup_accept(struct at_state_t *at_state);
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data);
-
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd);
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd);
-
-
-static inline void gigaset_isdn_rcv_err(struct bc_state *bcs)
-{
-	isdn_ctrl response;
-
-	/* error -> LL */
-	gig_dbg(DEBUG_CMD, "sending L1ERR");
-	response.driver = bcs->cs->myid;
-	response.command = ISDN_STAT_L1ERR;
-	response.arg = bcs->channel;
-	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
-	bcs->cs->iif.statcallb(&response);
-}
+void gigaset_isdn_connD(struct bc_state *bcs);
+void gigaset_isdn_hupD(struct bc_state *bcs);
+void gigaset_isdn_connB(struct bc_state *bcs);
+void gigaset_isdn_hupB(struct bc_state *bcs);
 
 /* ===========================================================================
  *  Functions implemented in ev-layer.c
@@ -732,6 +718,7 @@
 void gigaset_at_init(struct at_state_t *at_state, struct bc_state *bcs,
 		     struct cardstate *cs, int cid);
 int gigaset_get_channel(struct bc_state *bcs);
+struct bc_state *gigaset_get_free_channel(struct cardstate *cs);
 void gigaset_free_channel(struct bc_state *bcs);
 int gigaset_get_channels(struct cardstate *cs);
 void gigaset_free_channels(struct cardstate *cs);
@@ -781,7 +768,7 @@
 				  void *ptr, int parameter, void *arg);
 
 /* Called on CONFIG1 command from frontend. */
-int gigaset_enterconfigmode(struct cardstate *cs); //0: success <0: errorcode
+int gigaset_enterconfigmode(struct cardstate *cs);
 
 /* cs->lock must not be locked */
 static inline void gigaset_schedule_event(struct cardstate *cs)
@@ -816,35 +803,6 @@
 /* handling routines for sk_buff */
 /* ============================= */
 
-/* pass received skb to LL
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_skb(struct sk_buff *skb,
-				   struct cardstate *cs,
-				   struct bc_state *bcs)
-{
-	cs->iif.rcvcallb_skb(cs->myid, bcs->channel, skb);
-	bcs->trans_down++;
-}
-
-/* handle reception of corrupted skb
- * Warning: skb must not be accessed anymore!
- */
-static inline void gigaset_rcv_error(struct sk_buff *procskb,
-				     struct cardstate *cs,
-				     struct bc_state *bcs)
-{
-	if (procskb)
-		dev_kfree_skb(procskb);
-
-	if (bcs->ignore)
-		--bcs->ignore;
-	else {
-		++bcs->corrupted;
-		gigaset_isdn_rcv_err(bcs);
-	}
-}
-
 /* append received bytes to inbuf */
 int gigaset_fill_inbuf(struct inbuf_t *inbuf, const unsigned char *src,
 		       unsigned numbytes);
diff --git a/drivers/isdn/gigaset/i4l.c b/drivers/isdn/gigaset/i4l.c
index 654489d..c129ee4 100644
--- a/drivers/isdn/gigaset/i4l.c
+++ b/drivers/isdn/gigaset/i4l.c
@@ -14,6 +14,9 @@
  */
 
 #include "gigaset.h"
+#include <linux/isdnif.h>
+
+#define HW_HDR_LEN	2	/* Header size used to store ack info */
 
 /* == Handling of I4L IO =====================================================*/
 
@@ -36,12 +39,12 @@
 static int writebuf_from_LL(int driverID, int channel, int ack,
 			    struct sk_buff *skb)
 {
-	struct cardstate *cs;
+	struct cardstate *cs = gigaset_get_cs_by_id(driverID);
 	struct bc_state *bcs;
+	unsigned char *ack_header;
 	unsigned len;
-	unsigned skblen;
 
-	if (!(cs = gigaset_get_cs_by_id(driverID))) {
+	if (!cs) {
 		pr_err("%s: invalid driver ID (%d)\n", __func__, driverID);
 		return -ENODEV;
 	}
@@ -75,11 +78,23 @@
 		return -EINVAL;
 	}
 
-	skblen = ack ? len : 0;
-	skb->head[0] = skblen & 0xff;
-	skb->head[1] = skblen >> 8;
-	gig_dbg(DEBUG_MCMD, "skb: len=%u, skblen=%u: %02x %02x",
-		len, skblen, (unsigned) skb->head[0], (unsigned) skb->head[1]);
+	/* set up acknowledgement header */
+	if (skb_headroom(skb) < HW_HDR_LEN) {
+		/* should never happen */
+		dev_err(cs->dev, "%s: insufficient skb headroom\n", __func__);
+		return -ENOMEM;
+	}
+	skb_set_mac_header(skb, -HW_HDR_LEN);
+	skb->mac_len = HW_HDR_LEN;
+	ack_header = skb_mac_header(skb);
+	if (ack) {
+		ack_header[0] = len & 0xff;
+		ack_header[1] = len >> 8;
+	} else {
+		ack_header[0] = ack_header[1] = 0;
+	}
+	gig_dbg(DEBUG_MCMD, "skb: len=%u, ack=%d: %02x %02x",
+		len, ack, ack_header[0], ack_header[1]);
 
 	/* pass to device-specific module */
 	return cs->ops->send_skb(bcs, skb);
@@ -95,6 +110,8 @@
  */
 void gigaset_skb_sent(struct bc_state *bcs, struct sk_buff *skb)
 {
+	isdn_if *iif = bcs->cs->iif;
+	unsigned char *ack_header = skb_mac_header(skb);
 	unsigned len;
 	isdn_ctrl response;
 
@@ -104,8 +121,7 @@
 		dev_warn(bcs->cs->dev, "%s: skb->len==%d\n",
 			 __func__, skb->len);
 
-	len = (unsigned char) skb->head[0] |
-	      (unsigned) (unsigned char) skb->head[1] << 8;
+	len = ack_header[0] + ((unsigned) ack_header[1] << 8);
 	if (len) {
 		gig_dbg(DEBUG_MCMD, "ACKing to LL (id: %d, ch: %d, sz: %u)",
 			bcs->cs->myid, bcs->channel, len);
@@ -114,71 +130,177 @@
 		response.command = ISDN_STAT_BSENT;
 		response.arg = bcs->channel;
 		response.parm.length = len;
-		bcs->cs->iif.statcallb(&response);
+		iif->statcallb(&response);
 	}
 }
 EXPORT_SYMBOL_GPL(gigaset_skb_sent);
 
+/**
+ * gigaset_skb_rcvd() - pass received skb to LL
+ * @bcs:	B channel descriptor structure.
+ * @skb:	received data.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when user data has
+ * been successfully received, for passing to the LL.
+ * Warning: skb must not be accessed anymore!
+ */
+void gigaset_skb_rcvd(struct bc_state *bcs, struct sk_buff *skb)
+{
+	isdn_if *iif = bcs->cs->iif;
+
+	iif->rcvcallb_skb(bcs->cs->myid, bcs->channel, skb);
+	bcs->trans_down++;
+}
+EXPORT_SYMBOL_GPL(gigaset_skb_rcvd);
+
+/**
+ * gigaset_isdn_rcv_err() - signal receive error
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by hardware module {bas,ser,usb}_gigaset when a receive error
+ * has occurred, for signalling to the LL.
+ */
+void gigaset_isdn_rcv_err(struct bc_state *bcs)
+{
+	isdn_if *iif = bcs->cs->iif;
+	isdn_ctrl response;
+
+	/* if currently ignoring packets, just count down */
+	if (bcs->ignore) {
+		bcs->ignore--;
+		return;
+	}
+
+	/* update statistics */
+	bcs->corrupted++;
+
+	/* error -> LL */
+	gig_dbg(DEBUG_CMD, "sending L1ERR");
+	response.driver = bcs->cs->myid;
+	response.command = ISDN_STAT_L1ERR;
+	response.arg = bcs->channel;
+	response.parm.errcode = ISDN_STAT_L1ERR_RECV;
+	iif->statcallb(&response);
+}
+EXPORT_SYMBOL_GPL(gigaset_isdn_rcv_err);
+
 /* This function will be called by LL to send commands
  * NOTE: LL ignores the returned value, for commands other than ISDN_CMD_IOCTL,
  * so don't put too much effort into it.
  */
 static int command_from_LL(isdn_ctrl *cntrl)
 {
-	struct cardstate *cs = gigaset_get_cs_by_id(cntrl->driver);
+	struct cardstate *cs;
 	struct bc_state *bcs;
 	int retval = 0;
-	struct setup_parm *sp;
+	char **commands;
+	int ch;
+	int i;
+	size_t l;
 
 	gigaset_debugdrivers();
 
-	if (!cs) {
+	gig_dbg(DEBUG_CMD, "driver: %d, command: %d, arg: 0x%lx",
+		cntrl->driver, cntrl->command, cntrl->arg);
+
+	cs = gigaset_get_cs_by_id(cntrl->driver);
+	if (cs == NULL) {
 		pr_err("%s: invalid driver ID (%d)\n", __func__, cntrl->driver);
 		return -ENODEV;
 	}
+	ch = cntrl->arg & 0xff;
 
 	switch (cntrl->command) {
 	case ISDN_CMD_IOCTL:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_IOCTL (driver: %d, arg: %ld)",
-			cntrl->driver, cntrl->arg);
-
 		dev_warn(cs->dev, "ISDN_CMD_IOCTL not supported\n");
 		return -EINVAL;
 
 	case ISDN_CMD_DIAL:
 		gig_dbg(DEBUG_ANY,
-			"ISDN_CMD_DIAL (driver: %d, ch: %ld, "
-			"phone: %s, ownmsn: %s, si1: %d, si2: %d)",
-			cntrl->driver, cntrl->arg,
+			"ISDN_CMD_DIAL (phone: %s, msn: %s, si1: %d, si2: %d)",
 			cntrl->parm.setup.phone, cntrl->parm.setup.eazmsn,
 			cntrl->parm.setup.si1, cntrl->parm.setup.si2);
 
-		if (cntrl->arg >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_DIAL: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_DIAL: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		bcs = cs->bcs + cntrl->arg;
-
+		bcs = cs->bcs + ch;
 		if (!gigaset_get_channel(bcs)) {
 			dev_err(cs->dev, "ISDN_CMD_DIAL: channel not free\n");
 			return -EBUSY;
 		}
 
-		sp = kmalloc(sizeof *sp, GFP_ATOMIC);
-		if (!sp) {
+		commands = kzalloc(AT_NUM*(sizeof *commands), GFP_ATOMIC);
+		if (!commands) {
 			gigaset_free_channel(bcs);
 			dev_err(cs->dev, "ISDN_CMD_DIAL: out of memory\n");
 			return -ENOMEM;
 		}
-		*sp = cntrl->parm.setup;
 
-		if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, sp,
+		l = 3 + strlen(cntrl->parm.setup.phone);
+		commands[AT_DIAL] = kmalloc(l, GFP_ATOMIC);
+		if (!commands[AT_DIAL])
+			goto oom;
+		if (cntrl->parm.setup.phone[0] == '*' &&
+		    cntrl->parm.setup.phone[1] == '*') {
+			/* internal call: translate ** prefix to CTP value */
+			commands[AT_TYPE] = kstrdup("^SCTP=0\r", GFP_ATOMIC);
+			if (!commands[AT_TYPE])
+				goto oom;
+			snprintf(commands[AT_DIAL], l,
+				 "D%s\r", cntrl->parm.setup.phone+2);
+		} else {
+			commands[AT_TYPE] = kstrdup("^SCTP=1\r", GFP_ATOMIC);
+			if (!commands[AT_TYPE])
+				goto oom;
+			snprintf(commands[AT_DIAL], l,
+				 "D%s\r", cntrl->parm.setup.phone);
+		}
+
+		l = strlen(cntrl->parm.setup.eazmsn);
+		if (l) {
+			l += 8;
+			commands[AT_MSN] = kmalloc(l, GFP_ATOMIC);
+			if (!commands[AT_MSN])
+				goto oom;
+			snprintf(commands[AT_MSN], l, "^SMSN=%s\r",
+				 cntrl->parm.setup.eazmsn);
+		}
+
+		switch (cntrl->parm.setup.si1) {
+		case 1:		/* audio */
+			/* BC = 9090A3: 3.1 kHz audio, A-law */
+			commands[AT_BC] = kstrdup("^SBC=9090A3\r", GFP_ATOMIC);
+			if (!commands[AT_BC])
+				goto oom;
+			break;
+		case 7:		/* data */
+		default:	/* hope the app knows what it is doing */
+			/* BC = 8890: unrestricted digital information */
+			commands[AT_BC] = kstrdup("^SBC=8890\r", GFP_ATOMIC);
+			if (!commands[AT_BC])
+				goto oom;
+		}
+		/* ToDo: other si1 values, inspect si2, set HLC/LLC */
+
+		commands[AT_PROTO] = kmalloc(9, GFP_ATOMIC);
+		if (!commands[AT_PROTO])
+			goto oom;
+		snprintf(commands[AT_PROTO], 9, "^SBPR=%u\r", bcs->proto2);
+
+		commands[AT_ISO] = kmalloc(9, GFP_ATOMIC);
+		if (!commands[AT_ISO])
+			goto oom;
+		snprintf(commands[AT_ISO], 9, "^SISO=%u\r",
+			 (unsigned) bcs->channel + 1);
+
+		if (!gigaset_add_event(cs, &bcs->at_state, EV_DIAL, commands,
 				       bcs->at_state.seq_index, NULL)) {
-			//FIXME what should we do?
-			kfree(sp);
+			for (i = 0; i < AT_NUM; ++i)
+				kfree(commands[i]);
+			kfree(commands);
 			gigaset_free_channel(bcs);
 			return -ENOMEM;
 		}
@@ -186,115 +308,102 @@
 		gig_dbg(DEBUG_CMD, "scheduling DIAL");
 		gigaset_schedule_event(cs);
 		break;
-	case ISDN_CMD_ACCEPTD: //FIXME
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTD");
-
-		if (cntrl->arg >= cs->channels) {
+	case ISDN_CMD_ACCEPTD:
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_ACCEPTD: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state,
-				       EV_ACCEPT, NULL, 0, NULL)) {
-			//FIXME what should we do?
+		bcs = cs->bcs + ch;
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_ACCEPT, NULL, 0, NULL))
 			return -ENOMEM;
-		}
 
 		gig_dbg(DEBUG_CMD, "scheduling ACCEPT");
 		gigaset_schedule_event(cs);
 
 		break;
 	case ISDN_CMD_ACCEPTB:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ACCEPTB");
 		break;
 	case ISDN_CMD_HANGUP:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_HANGUP (ch: %d)",
-			(int) cntrl->arg);
-
-		if (cntrl->arg >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_HANGUP: invalid channel (%d)\n",
-				(int) cntrl->arg);
+				"ISDN_CMD_HANGUP: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg].at_state,
-				       EV_HUP, NULL, 0, NULL)) {
-			//FIXME what should we do?
+		bcs = cs->bcs + ch;
+		if (!gigaset_add_event(cs, &bcs->at_state,
+				       EV_HUP, NULL, 0, NULL))
 			return -ENOMEM;
-		}
 
 		gig_dbg(DEBUG_CMD, "scheduling HUP");
 		gigaset_schedule_event(cs);
 
 		break;
-	case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */ //FIXME
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_CLREAZ");
+	case ISDN_CMD_CLREAZ: /* Do not signal incoming signals */
+		dev_info(cs->dev, "ignoring ISDN_CMD_CLREAZ\n");
 		break;
-	case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */ //FIXME
-		gig_dbg(DEBUG_ANY,
-			"ISDN_CMD_SETEAZ (id: %d, ch: %ld, number: %s)",
-			cntrl->driver, cntrl->arg, cntrl->parm.num);
+	case ISDN_CMD_SETEAZ: /* Signal incoming calls for given MSN */
+		dev_info(cs->dev, "ignoring ISDN_CMD_SETEAZ (%s)\n",
+			 cntrl->parm.num);
 		break;
 	case ISDN_CMD_SETL2: /* Set L2 to given protocol */
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL2 (ch: %ld, proto: %lx)",
-			cntrl->arg & 0xff, (cntrl->arg >> 8));
-
-		if ((cntrl->arg & 0xff) >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL2: invalid channel (%d)\n",
-				(int) cntrl->arg & 0xff);
+				"ISDN_CMD_SETL2: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
-
-		if (!gigaset_add_event(cs, &cs->bcs[cntrl->arg & 0xff].at_state,
-				       EV_PROTO_L2, NULL, cntrl->arg >> 8,
-				       NULL)) {
-			//FIXME what should we do?
-			return -ENOMEM;
+		bcs = cs->bcs + ch;
+		if (bcs->chstate & CHS_D_UP) {
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL2: channel active (%d)\n", ch);
+			return -EINVAL;
 		}
-
-		gig_dbg(DEBUG_CMD, "scheduling PROTO_L2");
-		gigaset_schedule_event(cs);
+		switch (cntrl->arg >> 8) {
+		case ISDN_PROTO_L2_HDLC:
+			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_HDLC");
+			bcs->proto2 = L2_HDLC;
+			break;
+		case ISDN_PROTO_L2_TRANS:
+			gig_dbg(DEBUG_CMD, "ISDN_CMD_SETL2: setting L2_VOICE");
+			bcs->proto2 = L2_VOICE;
+			break;
+		default:
+			dev_err(cs->dev,
+				"ISDN_CMD_SETL2: unsupported protocol (%lu)\n",
+				cntrl->arg >> 8);
+			return -EINVAL;
+		}
 		break;
 	case ISDN_CMD_SETL3: /* Set L3 to given protocol */
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_SETL3 (ch: %ld, proto: %lx)",
-			cntrl->arg & 0xff, (cntrl->arg >> 8));
-
-		if ((cntrl->arg & 0xff) >= cs->channels) {
+		if (ch >= cs->channels) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: invalid channel (%d)\n",
-				(int) cntrl->arg & 0xff);
+				"ISDN_CMD_SETL3: invalid channel (%d)\n", ch);
 			return -EINVAL;
 		}
 
 		if (cntrl->arg >> 8 != ISDN_PROTO_L3_TRANS) {
 			dev_err(cs->dev,
-				"ISDN_CMD_SETL3: invalid protocol %lu\n",
+				"ISDN_CMD_SETL3: unsupported protocol (%lu)\n",
 				cntrl->arg >> 8);
 			return -EINVAL;
 		}
 
 		break;
 	case ISDN_CMD_PROCEED:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROCEED"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROCEED");
 		break;
 	case ISDN_CMD_ALERT:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_ALERT");
 		if (cntrl->arg >= cs->channels) {
 			dev_err(cs->dev,
 				"ISDN_CMD_ALERT: invalid channel (%d)\n",
 				(int) cntrl->arg);
 			return -EINVAL;
 		}
-		//bcs = cs->bcs + cntrl->arg;
-		//bcs->proto2 = -1;
-		// FIXME
 		break;
 	case ISDN_CMD_REDIR:
-		gig_dbg(DEBUG_ANY, "ISDN_CMD_REDIR"); //FIXME
+		gig_dbg(DEBUG_ANY, "ISDN_CMD_REDIR");
 		break;
 	case ISDN_CMD_PROT_IO:
 		gig_dbg(DEBUG_ANY, "ISDN_CMD_PROT_IO");
@@ -324,149 +433,34 @@
 	}
 
 	return retval;
+
+oom:
+	dev_err(bcs->cs->dev, "out of memory\n");
+	for (i = 0; i < AT_NUM; ++i)
+		kfree(commands[i]);
+	return -ENOMEM;
 }
 
-void gigaset_i4l_cmd(struct cardstate *cs, int cmd)
+static void gigaset_i4l_cmd(struct cardstate *cs, int cmd)
 {
+	isdn_if *iif = cs->iif;
 	isdn_ctrl command;
 
 	command.driver = cs->myid;
 	command.command = cmd;
 	command.arg = 0;
-	cs->iif.statcallb(&command);
+	iif->statcallb(&command);
 }
 
-void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd)
+static void gigaset_i4l_channel_cmd(struct bc_state *bcs, int cmd)
 {
+	isdn_if *iif = bcs->cs->iif;
 	isdn_ctrl command;
 
 	command.driver = bcs->cs->myid;
 	command.command = cmd;
 	command.arg = bcs->channel;
-	bcs->cs->iif.statcallb(&command);
-}
-
-int gigaset_isdn_setup_dial(struct at_state_t *at_state, void *data)
-{
-	struct bc_state *bcs = at_state->bcs;
-	unsigned proto;
-	const char *bc;
-	size_t length[AT_NUM];
-	size_t l;
-	int i;
-	struct setup_parm *sp = data;
-
-	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
-		proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	case ISDN_PROTO_L2_TRANS:
-		proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	default:
-		dev_err(bcs->cs->dev, "%s: invalid L2 protocol: %u\n",
-			__func__, bcs->proto2);
-		return -EINVAL;
-	}
-
-	switch (sp->si1) {
-	case 1:		/* audio */
-		bc = "9090A3";	/* 3.1 kHz audio, A-law */
-		break;
-	case 7:		/* data */
-	default:	/* hope the app knows what it is doing */
-		bc = "8890";	/* unrestricted digital information */
-	}
-	//FIXME add missing si1 values from 1TR6, inspect si2, set HLC/LLC
-
-	length[AT_DIAL ] = 1 + strlen(sp->phone) + 1 + 1;
-	l = strlen(sp->eazmsn);
-	length[AT_MSN  ] = l ? 6 + l + 1 + 1 : 0;
-	length[AT_BC   ] = 5 + strlen(bc) + 1 + 1;
-	length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */
-	length[AT_ISO  ] = 6 + 1 + 1 + 1; /* channel: 1 character */
-	length[AT_TYPE ] = 6 + 1 + 1 + 1; /* call type: 1 character */
-	length[AT_HLC  ] = 0;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-		if (length[i] &&
-		    !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) {
-			dev_err(bcs->cs->dev, "out of memory\n");
-			return -ENOMEM;
-		}
-	}
-
-	/* type = 1: extern, 0: intern, 2: recall, 3: door, 4: centrex */
-	if (sp->phone[0] == '*' && sp->phone[1] == '*') {
-		/* internal call: translate ** prefix to CTP value */
-		snprintf(bcs->commands[AT_DIAL], length[AT_DIAL],
-			 "D%s\r", sp->phone+2);
-		strncpy(bcs->commands[AT_TYPE], "^SCTP=0\r", length[AT_TYPE]);
-	} else {
-		snprintf(bcs->commands[AT_DIAL], length[AT_DIAL],
-			 "D%s\r", sp->phone);
-		strncpy(bcs->commands[AT_TYPE], "^SCTP=1\r", length[AT_TYPE]);
-	}
-
-	if (bcs->commands[AT_MSN])
-		snprintf(bcs->commands[AT_MSN], length[AT_MSN],
-			 "^SMSN=%s\r", sp->eazmsn);
-	snprintf(bcs->commands[AT_BC   ], length[AT_BC   ],
-		 "^SBC=%s\r", bc);
-	snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
-		 "^SBPR=%u\r", proto);
-	snprintf(bcs->commands[AT_ISO  ], length[AT_ISO  ],
-		 "^SISO=%u\r", (unsigned)bcs->channel + 1);
-
-	return 0;
-}
-
-int gigaset_isdn_setup_accept(struct at_state_t *at_state)
-{
-	unsigned proto;
-	size_t length[AT_NUM];
-	int i;
-	struct bc_state *bcs = at_state->bcs;
-
-	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
-		proto = 1; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	case ISDN_PROTO_L2_TRANS:
-		proto = 2; /* 0: Bitsynchron, 1: HDLC, 2: voice */
-		break;
-	default:
-		dev_err(at_state->cs->dev, "%s: invalid protocol: %u\n",
-			__func__, bcs->proto2);
-		return -EINVAL;
-	}
-
-	length[AT_DIAL ] = 0;
-	length[AT_MSN  ] = 0;
-	length[AT_BC   ] = 0;
-	length[AT_PROTO] = 6 + 1 + 1 + 1; /* proto: 1 character */
-	length[AT_ISO  ] = 6 + 1 + 1 + 1; /* channel: 1 character */
-	length[AT_TYPE ] = 0;
-	length[AT_HLC  ] = 0;
-
-	for (i = 0; i < AT_NUM; ++i) {
-		kfree(bcs->commands[i]);
-		bcs->commands[i] = NULL;
-		if (length[i] &&
-		    !(bcs->commands[i] = kmalloc(length[i], GFP_ATOMIC))) {
-			dev_err(at_state->cs->dev, "out of memory\n");
-			return -ENOMEM;
-		}
-	}
-
-	snprintf(bcs->commands[AT_PROTO], length[AT_PROTO],
-		 "^SBPR=%u\r", proto);
-	snprintf(bcs->commands[AT_ISO  ], length[AT_ISO  ],
-		 "^SISO=%u\r", (unsigned) bcs->channel + 1);
-
-	return 0;
+	iif->statcallb(&command);
 }
 
 /**
@@ -482,13 +476,14 @@
 {
 	struct cardstate *cs = at_state->cs;
 	struct bc_state *bcs = at_state->bcs;
+	isdn_if *iif = cs->iif;
 	isdn_ctrl response;
 	int retval;
 
 	/* fill ICALL structure */
 	response.parm.setup.si1 = 0;	/* default: unknown */
 	response.parm.setup.si2 = 0;
-	response.parm.setup.screen = 0;	//FIXME how to set these?
+	response.parm.setup.screen = 0;
 	response.parm.setup.plan = 0;
 	if (!at_state->str_var[STR_ZBC]) {
 		/* no BC (internal call): assume speech, A-law */
@@ -509,29 +504,27 @@
 		return ICALL_IGNORE;
 	}
 	if (at_state->str_var[STR_NMBR]) {
-		strncpy(response.parm.setup.phone, at_state->str_var[STR_NMBR],
-			sizeof response.parm.setup.phone - 1);
-		response.parm.setup.phone[sizeof response.parm.setup.phone - 1] = 0;
+		strlcpy(response.parm.setup.phone, at_state->str_var[STR_NMBR],
+			sizeof response.parm.setup.phone);
 	} else
 		response.parm.setup.phone[0] = 0;
 	if (at_state->str_var[STR_ZCPN]) {
-		strncpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN],
-			sizeof response.parm.setup.eazmsn - 1);
-		response.parm.setup.eazmsn[sizeof response.parm.setup.eazmsn - 1] = 0;
+		strlcpy(response.parm.setup.eazmsn, at_state->str_var[STR_ZCPN],
+			sizeof response.parm.setup.eazmsn);
 	} else
 		response.parm.setup.eazmsn[0] = 0;
 
 	if (!bcs) {
 		dev_notice(cs->dev, "no channel for incoming call\n");
 		response.command = ISDN_STAT_ICALLW;
-		response.arg = 0; //FIXME
+		response.arg = 0;
 	} else {
 		gig_dbg(DEBUG_CMD, "Sending ICALL");
 		response.command = ISDN_STAT_ICALL;
-		response.arg = bcs->channel; //FIXME
+		response.arg = bcs->channel;
 	}
 	response.driver = cs->myid;
-	retval = cs->iif.statcallb(&response);
+	retval = iif->statcallb(&response);
 	gig_dbg(DEBUG_CMD, "Response: %d", retval);
 	switch (retval) {
 	case 0:	/* no takers */
@@ -560,16 +553,109 @@
 	}
 }
 
-/* Set Callback function pointer */
-int gigaset_register_to_LL(struct cardstate *cs, const char *isdnid)
+/**
+ * gigaset_isdn_connD() - signal D channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the D channel connection has
+ * been established.
+ */
+void gigaset_isdn_connD(struct bc_state *bcs)
 {
-	isdn_if *iif = &cs->iif;
+	gig_dbg(DEBUG_CMD, "sending DCONN");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DCONN);
+}
 
-	gig_dbg(DEBUG_ANY, "Register driver capabilities to LL");
+/**
+ * gigaset_isdn_hupD() - signal D channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the D channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupD(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending DHUP");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_DHUP);
+}
+
+/**
+ * gigaset_isdn_connB() - signal B channel connect
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been established.
+ */
+void gigaset_isdn_connB(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending BCONN");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BCONN);
+}
+
+/**
+ * gigaset_isdn_hupB() - signal B channel hangup
+ * @bcs:	B channel descriptor structure.
+ *
+ * Called by main module to notify the LL that the B channel connection has
+ * been shut down.
+ */
+void gigaset_isdn_hupB(struct bc_state *bcs)
+{
+	gig_dbg(DEBUG_CMD, "sending BHUP");
+	gigaset_i4l_channel_cmd(bcs, ISDN_STAT_BHUP);
+}
+
+/**
+ * gigaset_isdn_start() - signal device availability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is available for
+ * use.
+ */
+void gigaset_isdn_start(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending RUN");
+	gigaset_i4l_cmd(cs, ISDN_STAT_RUN);
+}
+
+/**
+ * gigaset_isdn_stop() - signal device unavailability
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to notify the LL that the device is no longer
+ * available for use.
+ */
+void gigaset_isdn_stop(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending STOP");
+	gigaset_i4l_cmd(cs, ISDN_STAT_STOP);
+}
+
+/**
+ * gigaset_isdn_register() - register to LL
+ * @cs:		device descriptor structure.
+ * @isdnid:	device name.
+ *
+ * Called by main module to register the device with the LL.
+ *
+ * Return value: 1 for success, 0 for failure
+ */
+int gigaset_isdn_register(struct cardstate *cs, const char *isdnid)
+{
+	isdn_if *iif;
+
+	pr_info("ISDN4Linux interface\n");
+
+	iif = kmalloc(sizeof *iif, GFP_KERNEL);
+	if (!iif) {
+		pr_err("out of memory\n");
+		return 0;
+	}
 
 	if (snprintf(iif->id, sizeof iif->id, "%s_%u", isdnid, cs->minor_index)
 	    >= sizeof iif->id) {
 		pr_err("ID too long: %s\n", isdnid);
+		kfree(iif);
 		return 0;
 	}
 
@@ -593,9 +679,26 @@
 
 	if (!register_isdn(iif)) {
 		pr_err("register_isdn failed\n");
+		kfree(iif);
 		return 0;
 	}
 
+	cs->iif = iif;
 	cs->myid = iif->channels;		/* Set my device id */
+	cs->hw_hdr_len = HW_HDR_LEN;
 	return 1;
 }
+
+/**
+ * gigaset_isdn_unregister() - unregister from LL
+ * @cs:		device descriptor structure.
+ *
+ * Called by main module to unregister the device from the LL.
+ */
+void gigaset_isdn_unregister(struct cardstate *cs)
+{
+	gig_dbg(DEBUG_CMD, "sending UNLOAD");
+	gigaset_i4l_cmd(cs, ISDN_STAT_UNLOAD);
+	kfree(cs->iif);
+	cs->iif = NULL;
+}
diff --git a/drivers/isdn/gigaset/interface.c b/drivers/isdn/gigaset/interface.c
index 6a8e138..577809c 100644
--- a/drivers/isdn/gigaset/interface.c
+++ b/drivers/isdn/gigaset/interface.c
@@ -162,7 +162,7 @@
 		return -ENODEV;
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 	tty->driver_data = cs;
 
 	++cs->open_count;
@@ -171,7 +171,7 @@
 		spin_lock_irqsave(&cs->lock, flags);
 		cs->tty = tty;
 		spin_unlock_irqrestore(&cs->lock, flags);
-		tty->low_latency = 1; //FIXME test
+		tty->low_latency = 1;
 	}
 
 	mutex_unlock(&cs->mutex);
@@ -228,7 +228,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s(0x%x)", cs->minor_index, __func__, cmd);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -299,9 +299,8 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
-	// FIXME read from device?
 	retval = cs->control_state & (TIOCM_RTS|TIOCM_DTR);
 
 	mutex_unlock(&cs->mutex);
@@ -326,7 +325,7 @@
 		cs->minor_index, __func__, set, clear);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -356,7 +355,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -390,7 +389,7 @@
 	gig_dbg(DEBUG_IF, "%u: %s()", cs->minor_index, __func__);
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	if (!cs->connected) {
 		gig_dbg(DEBUG_IF, "not connected");
@@ -455,9 +454,8 @@
 		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
 	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else {
-		//FIXME
-	}
+	else
+		gig_dbg(DEBUG_ANY, "%s: not implemented\n", __func__);
 
 	mutex_unlock(&cs->mutex);
 }
@@ -480,9 +478,8 @@
 		gig_dbg(DEBUG_IF, "not connected");	/* nothing to do */
 	else if (!cs->open_count)
 		dev_warn(cs->dev, "%s: device not opened\n", __func__);
-	else {
-		//FIXME
-	}
+	else
+		gig_dbg(DEBUG_ANY, "%s: not implemented\n", __func__);
 
 	mutex_unlock(&cs->mutex);
 }
@@ -515,10 +512,9 @@
 		goto out;
 	}
 
-	// stolen from mct_u232.c
 	iflag = tty->termios->c_iflag;
 	cflag = tty->termios->c_cflag;
-	old_cflag = old ? old->c_cflag : cflag; //FIXME?
+	old_cflag = old ? old->c_cflag : cflag;
 	gig_dbg(DEBUG_IF, "%u: iflag %x cflag %x old %x",
 		cs->minor_index, iflag, cflag, old_cflag);
 
@@ -632,7 +628,8 @@
 	struct tty_struct *tty;
 
 	spin_lock_irqsave(&cs->lock, flags);
-	if ((tty = cs->tty) == NULL)
+	tty = cs->tty;
+	if (tty == NULL)
 		gig_dbg(DEBUG_ANY, "receive on closed device");
 	else {
 		tty_buffer_request_room(tty, len);
@@ -659,9 +656,9 @@
 
 	drv->have_tty = 0;
 
-	if ((drv->tty = alloc_tty_driver(minors)) == NULL)
+	drv->tty = tty = alloc_tty_driver(minors);
+	if (tty == NULL)
 		goto enomem;
-	tty = drv->tty;
 
 	tty->magic =		TTY_DRIVER_MAGIC,
 	tty->major =		GIG_MAJOR,
@@ -676,8 +673,8 @@
 
 	tty->owner =		THIS_MODULE;
 
-	tty->init_termios          = tty_std_termios; //FIXME
-	tty->init_termios.c_cflag  = B9600 | CS8 | CREAD | HUPCL | CLOCAL; //FIXME
+	tty->init_termios          = tty_std_termios;
+	tty->init_termios.c_cflag  = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
 	tty_set_operations(tty, &if_ops);
 
 	ret = tty_register_driver(tty);
diff --git a/drivers/isdn/gigaset/isocdata.c b/drivers/isdn/gigaset/isocdata.c
index 9f3ef7b..85394a6 100644
--- a/drivers/isdn/gigaset/isocdata.c
+++ b/drivers/isdn/gigaset/isocdata.c
@@ -41,7 +41,8 @@
 
 	read = iwb->read;
 	write = iwb->write;
-	if ((freebytes = read - write) > 0) {
+	freebytes = read - write;
+	if (freebytes > 0) {
 		/* no wraparound: need padding space within regular area */
 		return freebytes - BAS_OUTBUFPAD;
 	} else if (read < BAS_OUTBUFPAD) {
@@ -53,29 +54,6 @@
 	}
 }
 
-/* compare two offsets within the buffer
- * The buffer is seen as circular, with the read position as start
- * returns -1/0/1 if position a </=/> position b without crossing 'read'
- */
-static inline int isowbuf_poscmp(struct isowbuf_t *iwb, int a, int b)
-{
-	int read;
-	if (a == b)
-		return 0;
-	read = iwb->read;
-	if (a < b) {
-		if (a < read && read <= b)
-			return +1;
-		else
-			return -1;
-	} else {
-		if (b < read && read <= a)
-			return -1;
-		else
-			return +1;
-	}
-}
-
 /* start writing
  * acquire the write semaphore
  * return true if acquired, false if busy
@@ -271,7 +249,7 @@
  *        bit 14..13 = number of bits added by stuffing
  */
 static const u16 stufftab[5 * 256] = {
-// previous 1s = 0:
+/* previous 1s = 0: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x000f,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x201f,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x002f,
@@ -289,7 +267,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x0cef,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x2ddf,
 
-// previous 1s = 1:
+/* previous 1s = 1: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x0007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x200f,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x0017, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x202f,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x0027, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x204f,
@@ -307,7 +285,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x0ce7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dcf,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x10f7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x31ef,
 
-// previous 1s = 2:
+/* previous 1s = 2: */
  0x0000, 0x0001, 0x0002, 0x0003, 0x0004, 0x0005, 0x0006, 0x2007, 0x0008, 0x0009, 0x000a, 0x000b, 0x000c, 0x000d, 0x000e, 0x2017,
  0x0010, 0x0011, 0x0012, 0x0013, 0x0014, 0x0015, 0x0016, 0x2027, 0x0018, 0x0019, 0x001a, 0x001b, 0x001c, 0x001d, 0x001e, 0x2037,
  0x0020, 0x0021, 0x0022, 0x0023, 0x0024, 0x0025, 0x0026, 0x2047, 0x0028, 0x0029, 0x002a, 0x002b, 0x002c, 0x002d, 0x002e, 0x2057,
@@ -325,7 +303,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x0ce3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dc7, 0x0ce8, 0x0ce9, 0x0cea, 0x0ceb, 0x0cec, 0x0ced, 0x0cee, 0x2dd7,
  0x10f0, 0x10f1, 0x10f2, 0x10f3, 0x10f4, 0x10f5, 0x10f6, 0x31e7, 0x20f8, 0x20f9, 0x20fa, 0x20fb, 0x257c, 0x257d, 0x29be, 0x41f7,
 
-// previous 1s = 3:
+/* previous 1s = 3: */
  0x0000, 0x0001, 0x0002, 0x2003, 0x0004, 0x0005, 0x0006, 0x200b, 0x0008, 0x0009, 0x000a, 0x2013, 0x000c, 0x000d, 0x000e, 0x201b,
  0x0010, 0x0011, 0x0012, 0x2023, 0x0014, 0x0015, 0x0016, 0x202b, 0x0018, 0x0019, 0x001a, 0x2033, 0x001c, 0x001d, 0x001e, 0x203b,
  0x0020, 0x0021, 0x0022, 0x2043, 0x0024, 0x0025, 0x0026, 0x204b, 0x0028, 0x0029, 0x002a, 0x2053, 0x002c, 0x002d, 0x002e, 0x205b,
@@ -343,7 +321,7 @@
  0x0ce0, 0x0ce1, 0x0ce2, 0x2dc3, 0x0ce4, 0x0ce5, 0x0ce6, 0x2dcb, 0x0ce8, 0x0ce9, 0x0cea, 0x2dd3, 0x0cec, 0x0ced, 0x0cee, 0x2ddb,
  0x10f0, 0x10f1, 0x10f2, 0x31e3, 0x10f4, 0x10f5, 0x10f6, 0x31eb, 0x20f8, 0x20f9, 0x20fa, 0x41f3, 0x257c, 0x257d, 0x29be, 0x46fb,
 
-// previous 1s = 4:
+/* previous 1s = 4: */
  0x0000, 0x2001, 0x0002, 0x2005, 0x0004, 0x2009, 0x0006, 0x200d, 0x0008, 0x2011, 0x000a, 0x2015, 0x000c, 0x2019, 0x000e, 0x201d,
  0x0010, 0x2021, 0x0012, 0x2025, 0x0014, 0x2029, 0x0016, 0x202d, 0x0018, 0x2031, 0x001a, 0x2035, 0x001c, 0x2039, 0x001e, 0x203d,
  0x0020, 0x2041, 0x0022, 0x2045, 0x0024, 0x2049, 0x0026, 0x204d, 0x0028, 0x2051, 0x002a, 0x2055, 0x002c, 0x2059, 0x002e, 0x205d,
@@ -367,7 +345,8 @@
  * parameters:
  *	cin	input byte
  *	ones	number of trailing '1' bits in result before this step
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	number of trailing '1' bits in result after this step
  */
@@ -408,7 +387,8 @@
  * parameters:
  *	in	input buffer
  *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	position of end of packet in output buffer on success,
  *	-EAGAIN if write semaphore busy or buffer full
@@ -440,7 +420,8 @@
 		fcs = crc_ccitt_byte(fcs, c);
 	}
 
-	/* bitstuff and append FCS (complemented, least significant byte first) */
+	/* bitstuff and append FCS
+	 * (complemented, least significant byte first) */
 	fcs ^= 0xffff;
 	ones = hdlc_bitstuff_byte(iwb, fcs & 0x00ff, ones);
 	ones = hdlc_bitstuff_byte(iwb, (fcs >> 8) & 0x00ff, ones);
@@ -459,7 +440,8 @@
  * parameters:
  *	in	input buffer
  *	count	number of bytes in input buffer
- *	iwb	pointer to output buffer structure (write semaphore must be held)
+ *	iwb	pointer to output buffer structure
+ *		(write semaphore must be held)
  * return value:
  *	position of end of packet in output buffer on success,
  *	-EAGAIN if write semaphore busy or buffer full
@@ -500,7 +482,7 @@
 	int result;
 
 	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
+	case L2_HDLC:
 		result = hdlc_buildframe(bcs->hw.bas->isooutbuf, in, len);
 		gig_dbg(DEBUG_ISO, "%s: %d bytes HDLC -> %d",
 			__func__, len, result);
@@ -542,8 +524,9 @@
 	if (likely(bcs->skb != NULL))
 		skb_trim(bcs->skb, 0);
 	else if (!bcs->ignore) {
-		if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-			skb_reserve(bcs->skb, HW_HDR_LEN);
+		bcs->skb = dev_alloc_skb(SBUFSIZE + bcs->cs->hw_hdr_len);
+		if (bcs->skb)
+			skb_reserve(bcs->skb, bcs->cs->hw_hdr_len);
 		else
 			dev_err(bcs->cs->dev, "could not allocate skb\n");
 	}
@@ -557,43 +540,46 @@
  */
 static inline void hdlc_done(struct bc_state *bcs)
 {
+	struct cardstate *cs = bcs->cs;
 	struct sk_buff *procskb;
+	unsigned int len;
 
 	if (unlikely(bcs->ignore)) {
 		bcs->ignore--;
 		hdlc_flush(bcs);
 		return;
 	}
-
-	if ((procskb = bcs->skb) == NULL) {
+	procskb = bcs->skb;
+	if (procskb == NULL) {
 		/* previous error */
 		gig_dbg(DEBUG_ISO, "%s: skb=NULL", __func__);
-		gigaset_rcv_error(NULL, bcs->cs, bcs);
+		gigaset_isdn_rcv_err(bcs);
 	} else if (procskb->len < 2) {
-		dev_notice(bcs->cs->dev, "received short frame (%d octets)\n",
+		dev_notice(cs->dev, "received short frame (%d octets)\n",
 			   procskb->len);
 		bcs->hw.bas->runts++;
-		gigaset_rcv_error(procskb, bcs->cs, bcs);
+		dev_kfree_skb_any(procskb);
+		gigaset_isdn_rcv_err(bcs);
 	} else if (bcs->fcs != PPP_GOODFCS) {
-		dev_notice(bcs->cs->dev, "frame check error (0x%04x)\n",
-			   bcs->fcs);
+		dev_notice(cs->dev, "frame check error (0x%04x)\n", bcs->fcs);
 		bcs->hw.bas->fcserrs++;
-		gigaset_rcv_error(procskb, bcs->cs, bcs);
+		dev_kfree_skb_any(procskb);
+		gigaset_isdn_rcv_err(bcs);
 	} else {
-		procskb->len -= 2;		/* subtract FCS */
-		procskb->tail -= 2;
-		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)",
-			__func__, procskb->len);
+		len = procskb->len;
+		__skb_trim(procskb, len -= 2);	/* subtract FCS */
+		gig_dbg(DEBUG_ISO, "%s: good frame (%d octets)", __func__, len);
 		dump_bytes(DEBUG_STREAM_DUMP,
-			   "rcv data", procskb->data, procskb->len);
-		bcs->hw.bas->goodbytes += procskb->len;
-		gigaset_rcv_skb(procskb, bcs->cs, bcs);
+			   "rcv data", procskb->data, len);
+		bcs->hw.bas->goodbytes += len;
+		gigaset_skb_rcvd(bcs, procskb);
 	}
 
-	if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
+	bcs->skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
+	if (bcs->skb)
+		skb_reserve(bcs->skb, cs->hw_hdr_len);
 	else
-		dev_err(bcs->cs->dev, "could not allocate skb\n");
+		dev_err(cs->dev, "could not allocate skb\n");
 	bcs->fcs = PPP_INITFCS;
 }
 
@@ -610,12 +596,8 @@
 
 	dev_notice(bcs->cs->dev, "received partial byte (%d bits)\n", inbits);
 	bcs->hw.bas->alignerrs++;
-	gigaset_rcv_error(bcs->skb, bcs->cs, bcs);
-
-	if ((bcs->skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN)) != NULL)
-		skb_reserve(bcs->skb, HW_HDR_LEN);
-	else
-		dev_err(bcs->cs->dev, "could not allocate skb\n");
+	gigaset_isdn_rcv_err(bcs);
+	__skb_trim(bcs->skb, 0);
 	bcs->fcs = PPP_INITFCS;
 }
 
@@ -646,10 +628,10 @@
 };
 
 /* hdlc_unpack
- * perform HDLC frame processing (bit unstuffing, flag detection, FCS calculation)
- * on a sequence of received data bytes (8 bits each, LSB first)
- * pass on successfully received, complete frames as SKBs via gigaset_rcv_skb
- * notify of errors via gigaset_rcv_error
+ * perform HDLC frame processing (bit unstuffing, flag detection, FCS
+ * calculation) on a sequence of received data bytes (8 bits each, LSB first)
+ * pass on successfully received, complete frames as SKBs via gigaset_skb_rcvd
+ * notify of errors via gigaset_isdn_rcv_err
  * tally frames, errors etc. in BC structure counters
  * parameters:
  *	src	received data
@@ -665,9 +647,12 @@
 
 	/* load previous state:
 	 * inputstate = set of flag bits:
-	 * - INS_flag_hunt: no complete opening flag received since connection setup or last abort
-	 * - INS_have_data: at least one complete data byte received since last flag
-	 * seqlen = number of consecutive '1' bits in last 7 input stream bits (0..7)
+	 * - INS_flag_hunt: no complete opening flag received since connection
+	 *                  setup or last abort
+	 * - INS_have_data: at least one complete data byte received since last
+	 *                  flag
+	 * seqlen = number of consecutive '1' bits in last 7 input stream bits
+	 *          (0..7)
 	 * inbyte = accumulated partial data byte (if !INS_flag_hunt)
 	 * inbits = number of valid bits in inbyte, starting at LSB (0..6)
 	 */
@@ -701,9 +686,11 @@
 				inbyte = c >> (lead1 + 1);
 				inbits = 7 - lead1;
 				if (trail1 >= 8) {
-					/* interior stuffing: omitting the MSB handles most cases */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					inbits--;
-					/* correct the incorrectly handled cases individually */
 					switch (c) {
 					case 0xbe:
 						inbyte = 0x3f;
@@ -729,13 +716,14 @@
 			hdlc_flush(bcs);
 			inputstate |= INS_flag_hunt;
 		} else if (seqlen == 6) {
-			/* closing flag, including (6 - lead1) '1's and one '0' from inbits */
+			/* closing flag, including (6 - lead1) '1's
+			 * and one '0' from inbits */
 			if (inbits > 7 - lead1) {
 				hdlc_frag(bcs, inbits + lead1 - 7);
 				inputstate &= ~INS_have_data;
 			} else {
 				if (inbits < 7 - lead1)
-					ubc->stolen0s ++;
+					ubc->stolen0s++;
 				if (inputstate & INS_have_data) {
 					hdlc_done(bcs);
 					inputstate &= ~INS_have_data;
@@ -744,7 +732,7 @@
 
 			if (c == PPP_FLAG) {
 				/* complete flag, LSB overlaps preceding flag */
-				ubc->shared0s ++;
+				ubc->shared0s++;
 				inbits = 0;
 				inbyte = 0;
 			} else if (trail1 != 7) {
@@ -752,9 +740,11 @@
 				inbyte = c >> (lead1 + 1);
 				inbits = 7 - lead1;
 				if (trail1 >= 8) {
-					/* interior stuffing: omitting the MSB handles most cases */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					inbits--;
-					/* correct the incorrectly handled cases individually */
 					switch (c) {
 					case 0xbe:
 						inbyte = 0x3f;
@@ -762,7 +752,8 @@
 					}
 				}
 			} else {
-				/* abort sequence follows, skb already empty anyway */
+				/* abort sequence follows,
+				 * skb already empty anyway */
 				ubc->aborts++;
 				inputstate |= INS_flag_hunt;
 			}
@@ -787,14 +778,17 @@
 			} else {
 				/* stuffed data */
 				if (trail1 < 7) { /* => seqlen == 5 */
-					/* stuff bit at position lead1, no interior stuffing */
+					/* stuff bit at position lead1,
+					 * no interior stuffing */
 					unsigned char mask = (1 << lead1) - 1;
 					c = (c & mask) | ((c & ~mask) >> 1);
 					inbyte |= c << inbits;
 					inbits += 7;
 				} else if (seqlen < 5) { /* trail1 >= 8 */
-					/* interior stuffing: omitting the MSB handles most cases */
-					/* correct the incorrectly handled cases individually */
+					/* interior stuffing:
+					 * omitting the MSB handles most cases,
+					 * correct the incorrectly handled
+					 * cases individually */
 					switch (c) {
 					case 0xbe:
 						c = 0x7e;
@@ -804,8 +798,9 @@
 					inbits += 7;
 				} else { /* seqlen == 5 && trail1 >= 8 */
 
-					/* stuff bit at lead1 *and* interior stuffing */
-					switch (c) {	/* unstuff individually */
+					/* stuff bit at lead1 *and* interior
+					 * stuffing -- unstuff individually */
+					switch (c) {
 					case 0x7d:
 						c = 0x3f;
 						break;
@@ -841,7 +836,7 @@
 }
 
 /* trans_receive
- * pass on received USB frame transparently as SKB via gigaset_rcv_skb
+ * pass on received USB frame transparently as SKB via gigaset_skb_rcvd
  * invert bytes
  * tally frames, errors etc. in BC structure counters
  * parameters:
@@ -852,6 +847,7 @@
 static inline void trans_receive(unsigned char *src, unsigned count,
 				 struct bc_state *bcs)
 {
+	struct cardstate *cs = bcs->cs;
 	struct sk_buff *skb;
 	int dobytes;
 	unsigned char *dst;
@@ -861,13 +857,14 @@
 		hdlc_flush(bcs);
 		return;
 	}
-	if (unlikely((skb = bcs->skb) == NULL)) {
-		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
+	skb = bcs->skb;
+	if (unlikely(skb == NULL)) {
+		bcs->skb = skb = dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
 		if (!skb) {
-			dev_err(bcs->cs->dev, "could not allocate skb\n");
+			dev_err(cs->dev, "could not allocate skb\n");
 			return;
 		}
-		skb_reserve(skb, HW_HDR_LEN);
+		skb_reserve(skb, cs->hw_hdr_len);
 	}
 	bcs->hw.bas->goodbytes += skb->len;
 	dobytes = TRANSBUFSIZE - skb->len;
@@ -881,23 +878,24 @@
 		if (dobytes == 0) {
 			dump_bytes(DEBUG_STREAM_DUMP,
 				   "rcv data", skb->data, skb->len);
-			gigaset_rcv_skb(skb, bcs->cs, bcs);
-			bcs->skb = skb = dev_alloc_skb(SBUFSIZE + HW_HDR_LEN);
+			gigaset_skb_rcvd(bcs, skb);
+			bcs->skb = skb =
+				dev_alloc_skb(SBUFSIZE + cs->hw_hdr_len);
 			if (!skb) {
-				dev_err(bcs->cs->dev,
-					"could not allocate skb\n");
+				dev_err(cs->dev, "could not allocate skb\n");
 				return;
 			}
-			skb_reserve(bcs->skb, HW_HDR_LEN);
+			skb_reserve(skb, cs->hw_hdr_len);
 			dobytes = TRANSBUFSIZE;
 		}
 	}
 }
 
-void gigaset_isoc_receive(unsigned char *src, unsigned count, struct bc_state *bcs)
+void gigaset_isoc_receive(unsigned char *src, unsigned count,
+			  struct bc_state *bcs)
 {
 	switch (bcs->proto2) {
-	case ISDN_PROTO_L2_HDLC:
+	case L2_HDLC:
 		hdlc_unpack(src, count, bcs);
 		break;
 	default:		/* assume transparent */
@@ -981,8 +979,10 @@
  * @bcs:	B channel descriptor structure.
  * @skb:	data to send.
  *
- * Called by i4l.c to queue an skb for sending, and start transmission if
+ * Called by LL to queue an skb for sending, and start transmission if
  * necessary.
+ * Once the payload data has been transmitted completely, gigaset_skb_sent()
+ * will be called with the skb's link layer header preserved.
  *
  * Return value:
  *	number of bytes accepted for sending (skb->len) if ok,
diff --git a/drivers/isdn/gigaset/proc.c b/drivers/isdn/gigaset/proc.c
index 9715aad..758a00c 100644
--- a/drivers/isdn/gigaset/proc.c
+++ b/drivers/isdn/gigaset/proc.c
@@ -39,7 +39,7 @@
 			return -EINVAL;
 
 	if (mutex_lock_interruptible(&cs->mutex))
-		return -ERESTARTSYS; // FIXME -EINTR?
+		return -ERESTARTSYS;
 
 	cs->waiting = 1;
 	if (!gigaset_add_event(cs, &cs->at_state, EV_PROC_CIDMODE,
diff --git a/drivers/isdn/gigaset/ser-gigaset.c b/drivers/isdn/gigaset/ser-gigaset.c
index 3071a52..ac3409e 100644
--- a/drivers/isdn/gigaset/ser-gigaset.c
+++ b/drivers/isdn/gigaset/ser-gigaset.c
@@ -164,9 +164,15 @@
 {
 	struct cardstate *cs = (struct cardstate *) data;
 	struct bc_state *bcs;
+	struct sk_buff *nextskb;
 	int sent = 0;
 
-	if (!cs || !(bcs = cs->bcs)) {
+	if (!cs) {
+		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
+		return;
+	}
+	bcs = cs->bcs;
+	if (!bcs) {
 		gig_dbg(DEBUG_OUTPUT, "%s: no cardstate", __func__);
 		return;
 	}
@@ -179,9 +185,11 @@
 			return;
 
 		/* no command to send; get skb */
-		if (!(bcs->tx_skb = skb_dequeue(&bcs->squeue)))
+		nextskb = skb_dequeue(&bcs->squeue);
+		if (!nextskb)
 			/* no skb either, nothing to do */
 			return;
+		bcs->tx_skb = nextskb;
 
 		gig_dbg(DEBUG_INTR, "Dequeued skb (Adr: %lx)",
 			(unsigned long) bcs->tx_skb);
@@ -236,19 +244,20 @@
  *	number of bytes queued, or error code < 0
  */
 static int gigaset_write_cmd(struct cardstate *cs, const unsigned char *buf,
-                             int len, struct tasklet_struct *wake_tasklet)
+			     int len, struct tasklet_struct *wake_tasklet)
 {
 	struct cmdbuf_t *cb;
 	unsigned long flags;
 
 	gigaset_dbg_buffer(cs->mstate != MS_LOCKED ?
-	                     DEBUG_TRANSCMD : DEBUG_LOCKCMD,
-	                   "CMD Transmit", len, buf);
+				DEBUG_TRANSCMD : DEBUG_LOCKCMD,
+			   "CMD Transmit", len, buf);
 
 	if (len <= 0)
 		return 0;
 
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory!\n", __func__);
 		return -ENOMEM;
 	}
@@ -392,7 +401,6 @@
 	struct platform_device *pdev = to_platform_device(dev);
 
 	/* adapted from platform_device_release() in drivers/base/platform.c */
-	//FIXME is this actually necessary?
 	kfree(dev->platform_data);
 	kfree(pdev->resource);
 }
@@ -404,16 +412,20 @@
 static int gigaset_initcshw(struct cardstate *cs)
 {
 	int rc;
+	struct ser_cardstate *scs;
 
-	if (!(cs->hw.ser = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL))) {
+	scs = kzalloc(sizeof(struct ser_cardstate), GFP_KERNEL);
+	if (!scs) {
 		pr_err("out of memory\n");
 		return 0;
 	}
+	cs->hw.ser = scs;
 
 	cs->hw.ser->dev.name = GIGASET_MODULENAME;
 	cs->hw.ser->dev.id = cs->minor_index;
 	cs->hw.ser->dev.dev.release = gigaset_device_release;
-	if ((rc = platform_device_register(&cs->hw.ser->dev)) != 0) {
+	rc = platform_device_register(&cs->hw.ser->dev);
+	if (rc != 0) {
 		pr_err("error %d registering platform device\n", rc);
 		kfree(cs->hw.ser);
 		cs->hw.ser = NULL;
@@ -422,7 +434,7 @@
 	dev_set_drvdata(&cs->hw.ser->dev.dev, cs);
 
 	tasklet_init(&cs->write_tasklet,
-	             &gigaset_modem_fill, (unsigned long) cs);
+		     &gigaset_modem_fill, (unsigned long) cs);
 	return 1;
 }
 
@@ -434,7 +446,8 @@
  * Called by "gigaset_start" and "gigaset_enterconfigmode" in common.c
  * and by "if_lock" and "if_termios" in interface.c
  */
-static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state)
+static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state,
+				  unsigned new_state)
 {
 	struct tty_struct *tty = cs->hw.ser->tty;
 	unsigned int set, clear;
@@ -520,8 +533,8 @@
 	}
 
 	/* allocate memory for our device state and intialize it */
-	if (!(cs = gigaset_initcs(driver, 1, 1, 0, cidmode,
-				  GIGASET_MODULENAME)))
+	cs = gigaset_initcs(driver, 1, 1, 0, cidmode, GIGASET_MODULENAME);
+	if (!cs)
 		goto error;
 
 	cs->dev = &cs->hw.ser->dev.dev;
@@ -690,7 +703,8 @@
 
 	if (!cs)
 		return;
-	if (!(inbuf = cs->inbuf)) {
+	inbuf = cs->inbuf;
+	if (!inbuf) {
 		dev_err(cs->dev, "%s: no inbuf\n", __func__);
 		cs_put(cs);
 		return;
@@ -770,18 +784,21 @@
 	int rc;
 
 	gig_dbg(DEBUG_INIT, "%s", __func__);
-	if ((rc = platform_driver_register(&device_driver)) != 0) {
+	rc = platform_driver_register(&device_driver);
+	if (rc != 0) {
 		pr_err("error %d registering platform driver\n", rc);
 		return rc;
 	}
 
 	/* allocate memory for our driver state and intialize it */
-	if (!(driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
 					  GIGASET_MODULENAME, GIGASET_DEVNAME,
-					  &ops, THIS_MODULE)))
+					  &ops, THIS_MODULE);
+	if (!driver)
 		goto error;
 
-	if ((rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc)) != 0) {
+	rc = tty_register_ldisc(N_GIGASET_M101, &gigaset_ldisc);
+	if (rc != 0) {
 		pr_err("error %d registering line discipline\n", rc);
 		goto error;
 	}
@@ -808,7 +825,8 @@
 		driver = NULL;
 	}
 
-	if ((rc = tty_unregister_ldisc(N_GIGASET_M101)) != 0)
+	rc = tty_unregister_ldisc(N_GIGASET_M101);
+	if (rc != 0)
 		pr_err("error %d unregistering line discipline\n", rc);
 
 	platform_driver_unregister(&device_driver);
diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c
index 4deb1ab0..f56b2a8 100644
--- a/drivers/isdn/gigaset/usb-gigaset.c
+++ b/drivers/isdn/gigaset/usb-gigaset.c
@@ -43,14 +43,14 @@
 #define GIGASET_MODULENAME "usb_gigaset"
 #define GIGASET_DEVNAME    "ttyGU"
 
-#define IF_WRITEBUF 2000 //FIXME  // WAKEUP_CHARS: 256
+#define IF_WRITEBUF 2000	/* arbitrary limit */
 
 /* Values for the Gigaset M105 Data */
 #define USB_M105_VENDOR_ID	0x0681
 #define USB_M105_PRODUCT_ID	0x0009
 
 /* table of devices that work with this driver */
-static const struct usb_device_id gigaset_table [] = {
+static const struct usb_device_id gigaset_table[] = {
 	{ USB_DEVICE(USB_M105_VENDOR_ID, USB_M105_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
@@ -97,8 +97,8 @@
  *       41 19 -- -- -- -- 06 00 00 00 00 xx 11 13
  *            Used after every "configuration sequence" (RQ 12, RQs 01/03/13).
  *            xx is usually 0x00 but was 0x7e before starting data transfer
- *            in unimodem mode. So, this might be an array of characters that need
- *            special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
+ *            in unimodem mode. So, this might be an array of characters that
+ *            need special treatment ("commit all bufferd data"?), 11=^Q, 13=^S.
  *
  * Unimodem mode: use "modprobe ppp_async flag_time=0" as the device _needs_ two
  * flags per packet.
@@ -114,7 +114,7 @@
 static int gigaset_resume(struct usb_interface *intf);
 static int gigaset_pre_reset(struct usb_interface *intf);
 
-static struct gigaset_driver *driver = NULL;
+static struct gigaset_driver *driver;
 
 /* usb specific object needed to register this driver with the usb subsystem */
 static struct usb_driver gigaset_usb_driver = {
@@ -141,6 +141,7 @@
 	struct urb		*bulk_out_urb;
 
 	/* Input buffer */
+	unsigned char		*rcvbuf;
 	int			rcvbuf_size;
 	struct urb		*read_urb;
 	__u8			int_in_endpointAddr;
@@ -164,13 +165,11 @@
 	val = tiocm_to_gigaset(new_state);
 
 	gig_dbg(DEBUG_USBREQ, "set flags 0x%02x with mask 0x%02x", val, mask);
-	// don't use this in an interrupt/BH
 	r = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 7, 0x41,
 			    (val & 0xff) | ((mask & 0xff) << 8), 0,
 			    NULL, 0, 2000 /* timeout? */);
 	if (r < 0)
 		return r;
-	//..
 	return 0;
 }
 
@@ -220,7 +219,6 @@
 	cflag &= CBAUD;
 
 	switch (cflag) {
-	//FIXME more values?
 	case    B300: rate =     300; break;
 	case    B600: rate =     600; break;
 	case   B1200: rate =    1200; break;
@@ -273,7 +271,7 @@
 	/* set the number of stop bits */
 	if (cflag & CSTOPB) {
 		if ((cflag & CSIZE) == CS5)
-			val |= 1; /* 1.5 stop bits */ //FIXME is this okay?
+			val |= 1; /* 1.5 stop bits */
 		else
 			val |= 2; /* 2 stop bits */
 	}
@@ -282,7 +280,7 @@
 }
 
 
- /*================================================================================================================*/
+/*============================================================================*/
 static int gigaset_init_bchannel(struct bc_state *bcs)
 {
 	/* nothing to do for M10x */
@@ -344,7 +342,6 @@
 			if (write_modem(cs) < 0) {
 				gig_dbg(DEBUG_OUTPUT,
 					"modem_fill: write_modem failed");
-				// FIXME should we tell the LL?
 				again = 1; /* no callback will be called! */
 			}
 		}
@@ -356,8 +353,8 @@
  */
 static void gigaset_read_int_callback(struct urb *urb)
 {
-	struct inbuf_t *inbuf = urb->context;
-	struct cardstate *cs = inbuf->cs;
+	struct cardstate *cs = urb->context;
+	struct inbuf_t *inbuf = cs->inbuf;
 	int status = urb->status;
 	int r;
 	unsigned numbytes;
@@ -368,7 +365,7 @@
 		numbytes = urb->actual_length;
 
 		if (numbytes) {
-			src = inbuf->rcvbuf;
+			src = cs->hw.usb->rcvbuf;
 			if (unlikely(*src))
 				dev_warn(cs->dev,
 				    "%s: There was no leading 0, but 0x%02x!\n",
@@ -440,7 +437,7 @@
 	struct cmdbuf_t *tcb;
 	unsigned long flags;
 	int count;
-	int status = -ENOENT; // FIXME
+	int status = -ENOENT;
 	struct usb_cardstate *ucs = cs->hw.usb;
 
 	do {
@@ -480,7 +477,9 @@
 			ucs->busy = 1;
 
 			spin_lock_irqsave(&cs->lock, flags);
-			status = cs->connected ? usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) : -ENODEV;
+			status = cs->connected ?
+				usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC) :
+				-ENODEV;
 			spin_unlock_irqrestore(&cs->lock, flags);
 
 			if (status) {
@@ -510,8 +509,8 @@
 
 	if (len <= 0)
 		return 0;
-
-	if (!(cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC))) {
+	cb = kmalloc(sizeof(struct cmdbuf_t) + len, GFP_ATOMIC);
+	if (!cb) {
 		dev_err(cs->dev, "%s: out of memory\n", __func__);
 		return -ENOMEM;
 	}
@@ -637,9 +636,7 @@
 		return -EINVAL;
 	}
 
-	/* Copy data to bulk out buffer and  // FIXME copying not necessary
-	 * transmit data
-	 */
+	/* Copy data to bulk out buffer and transmit data */
 	count = min(bcs->tx_skb->len, (unsigned) ucs->bulk_out_size);
 	skb_copy_from_linear_data(bcs->tx_skb, ucs->bulk_out_buffer, count);
 	skb_pull(bcs->tx_skb, count);
@@ -650,7 +647,8 @@
 	if (cs->connected) {
 		usb_fill_bulk_urb(ucs->bulk_out_urb, ucs->udev,
 				  usb_sndbulkpipe(ucs->udev,
-						  ucs->bulk_out_endpointAddr & 0x0f),
+						  ucs->bulk_out_endpointAddr &
+						  0x0f),
 				  ucs->bulk_out_buffer, count,
 				  gigaset_write_bulk_callback, cs);
 		ret = usb_submit_urb(ucs->bulk_out_urb, GFP_ATOMIC);
@@ -666,7 +664,7 @@
 
 	if (!bcs->tx_skb->len) {
 		/* skb sent completely */
-		gigaset_skb_sent(bcs, bcs->tx_skb); //FIXME also, when ret<0?
+		gigaset_skb_sent(bcs, bcs->tx_skb);
 
 		gig_dbg(DEBUG_INTR, "kfree skb (Adr: %lx)!",
 			(unsigned long) bcs->tx_skb);
@@ -763,8 +761,8 @@
 	buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
 	ucs->rcvbuf_size = buffer_size;
 	ucs->int_in_endpointAddr = endpoint->bEndpointAddress;
-	cs->inbuf[0].rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
-	if (!cs->inbuf[0].rcvbuf) {
+	ucs->rcvbuf = kmalloc(buffer_size, GFP_KERNEL);
+	if (!ucs->rcvbuf) {
 		dev_err(cs->dev, "Couldn't allocate rcvbuf\n");
 		retval = -ENOMEM;
 		goto error;
@@ -773,9 +771,9 @@
 	usb_fill_int_urb(ucs->read_urb, udev,
 			 usb_rcvintpipe(udev,
 					endpoint->bEndpointAddress & 0x0f),
-			 cs->inbuf[0].rcvbuf, buffer_size,
+			 ucs->rcvbuf, buffer_size,
 			 gigaset_read_int_callback,
-			 cs->inbuf + 0, endpoint->bInterval);
+			 cs, endpoint->bInterval);
 
 	retval = usb_submit_urb(ucs->read_urb, GFP_KERNEL);
 	if (retval) {
@@ -789,7 +787,7 @@
 
 	if (!gigaset_start(cs)) {
 		tasklet_kill(&cs->write_tasklet);
-		retval = -ENODEV; //FIXME
+		retval = -ENODEV;
 		goto error;
 	}
 	return 0;
@@ -798,11 +796,11 @@
 	usb_kill_urb(ucs->read_urb);
 	kfree(ucs->bulk_out_buffer);
 	usb_free_urb(ucs->bulk_out_urb);
-	kfree(cs->inbuf[0].rcvbuf);
+	kfree(ucs->rcvbuf);
 	usb_free_urb(ucs->read_urb);
 	usb_set_intfdata(interface, NULL);
 	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
 	usb_put_dev(ucs->udev);
 	ucs->udev = NULL;
 	ucs->interface = NULL;
@@ -831,10 +829,10 @@
 
 	kfree(ucs->bulk_out_buffer);
 	usb_free_urb(ucs->bulk_out_urb);
-	kfree(cs->inbuf[0].rcvbuf);
+	kfree(ucs->rcvbuf);
 	usb_free_urb(ucs->read_urb);
 	ucs->read_urb = ucs->bulk_out_urb = NULL;
-	cs->inbuf[0].rcvbuf = ucs->bulk_out_buffer = NULL;
+	ucs->rcvbuf = ucs->bulk_out_buffer = NULL;
 
 	usb_put_dev(ucs->udev);
 	ucs->interface = NULL;
@@ -916,9 +914,10 @@
 	int result;
 
 	/* allocate memory for our driver state and intialize it */
-	if ((driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
-				       GIGASET_MODULENAME, GIGASET_DEVNAME,
-				       &ops, THIS_MODULE)) == NULL)
+	driver = gigaset_initdriver(GIGASET_MINOR, GIGASET_MINORS,
+				    GIGASET_MODULENAME, GIGASET_DEVNAME,
+				    &ops, THIS_MODULE);
+	if (driver == NULL)
 		goto error;
 
 	/* register this driver with the USB subsystem */
diff --git a/drivers/isdn/mISDN/socket.c b/drivers/isdn/mISDN/socket.c
index feb0fa4..fcfe17a 100644
--- a/drivers/isdn/mISDN/socket.c
+++ b/drivers/isdn/mISDN/socket.c
@@ -779,7 +779,7 @@
 }
 
 static int
-mISDN_sock_create(struct net *net, struct socket *sock, int proto)
+mISDN_sock_create(struct net *net, struct socket *sock, int proto, int kern)
 {
 	int err = -EPROTONOSUPPORT;
 
@@ -808,8 +808,7 @@
 	return err;
 }
 
-static struct
-net_proto_family mISDN_sock_family_ops = {
+static const struct net_proto_family mISDN_sock_family_ops = {
 	.owner  = THIS_MODULE,
 	.family = PF_ISDN,
 	.create = mISDN_sock_create,
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 7c8e7122a..e4f599f 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -150,9 +150,9 @@
 	tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
 	depends on LEDS_CLASS && I2C
 	help
-    This option enables support for LEDs connected to the National
-    Semiconductor LP3944 Lighting Management Unit (LMU) also known as
-    Fun Light Chip.
+	  This option enables support for LEDs connected to the National
+	  Semiconductor LP3944 Lighting Management Unit (LMU) also known as
+	  Fun Light Chip.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called leds-lp3944.
@@ -195,6 +195,13 @@
 	  LED driver chips accessed via the I2C bus.  Supported
 	  devices include PCA9550, PCA9551, PCA9552, and PCA9553.
 
+config LEDS_WM831X_STATUS
+	tristate "LED support for status LEDs on WM831x PMICs"
+	depends on LEDS_CLASS && MFD_WM831X
+	help
+	  This option enables support for the status LEDs of the WM831x
+          series of PMICs.
+
 config LEDS_WM8350
 	tristate "LED Support for WM8350 AudioPlus PMIC"
 	depends on LEDS_CLASS && MFD_WM8350
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e8cdcf7..46d7270 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -26,6 +26,7 @@
 obj-$(CONFIG_LEDS_FSG)			+= leds-fsg.o
 obj-$(CONFIG_LEDS_PCA955X)		+= leds-pca955x.o
 obj-$(CONFIG_LEDS_DA903X)		+= leds-da903x.o
+obj-$(CONFIG_LEDS_WM831X_STATUS)	+= leds-wm831x-status.o
 obj-$(CONFIG_LEDS_WM8350)		+= leds-wm8350.o
 obj-$(CONFIG_LEDS_PWM)			+= leds-pwm.o
 
diff --git a/drivers/leds/leds-clevo-mail.c b/drivers/leds/leds-clevo-mail.c
index f2242db..a498135 100644
--- a/drivers/leds/leds-clevo-mail.c
+++ b/drivers/leds/leds-clevo-mail.c
@@ -153,7 +153,7 @@
 	.flags			= LED_CORE_SUSPENDRESUME,
 };
 
-static int __init clevo_mail_led_probe(struct platform_device *pdev)
+static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
 {
 	return led_classdev_register(&pdev->dev, &clevo_mail_led);
 }
diff --git a/drivers/leds/leds-cobalt-qube.c b/drivers/leds/leds-cobalt-qube.c
index 059aa29..8816806 100644
--- a/drivers/leds/leds-cobalt-qube.c
+++ b/drivers/leds/leds-cobalt-qube.c
@@ -28,7 +28,7 @@
 }
 
 static struct led_classdev qube_front_led = {
-	.name			= "qube-front",
+	.name			= "qube::front",
 	.brightness		= LED_FULL,
 	.brightness_set		= qube_front_led_set,
 	.default_trigger	= "ide-disk",
diff --git a/drivers/leds/leds-cobalt-raq.c b/drivers/leds/leds-cobalt-raq.c
index 5f1ce81..defc212 100644
--- a/drivers/leds/leds-cobalt-raq.c
+++ b/drivers/leds/leds-cobalt-raq.c
@@ -49,7 +49,7 @@
 }
 
 static struct led_classdev raq_web_led = {
-	.name		= "raq-web",
+	.name		= "raq::web",
 	.brightness_set	= raq_web_led_set,
 };
 
@@ -70,7 +70,7 @@
 }
 
 static struct led_classdev raq_power_off_led = {
-	.name			= "raq-power-off",
+	.name			= "raq::power-off",
 	.brightness_set		= raq_power_off_led_set,
 	.default_trigger	= "power-off",
 };
diff --git a/drivers/leds/leds-gpio.c b/drivers/leds/leds-gpio.c
index 6b06638..7467980 100644
--- a/drivers/leds/leds-gpio.c
+++ b/drivers/leds/leds-gpio.c
@@ -80,7 +80,7 @@
 
 	/* skip leds that aren't available */
 	if (!gpio_is_valid(template->gpio)) {
-		printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", 
+		printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
 				template->gpio, template->name);
 		return 0;
 	}
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index dba8921..adc561e 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -19,9 +19,6 @@
 #include <linux/workqueue.h>
 #include <linux/leds-pca9532.h>
 
-static const unsigned short normal_i2c[] = { /*0x60,*/ I2C_CLIENT_END};
-I2C_CLIENT_INSMOD_1(pca9532);
-
 #define PCA9532_REG_PSC(i) (0x2+(i)*2)
 #define PCA9532_REG_PWM(i) (0x3+(i)*2)
 #define PCA9532_REG_LS0  0x6
@@ -34,7 +31,7 @@
 	struct i2c_client *client;
 	struct pca9532_led leds[16];
 	struct mutex update_lock;
-	struct input_dev    *idev;
+	struct input_dev *idev;
 	struct work_struct work;
 	u8 pwm[2];
 	u8 psc[2];
@@ -53,9 +50,9 @@
 
 static struct i2c_driver pca9532_driver = {
 	.driver = {
-		.name   = "pca9532",
+		.name = "pca9532",
 	},
-	.probe  = pca9532_probe,
+	.probe = pca9532_probe,
 	.remove = pca9532_remove,
 	.id_table = pca9532_id,
 };
@@ -149,7 +146,7 @@
 
 	if (*delay_on == 0 && *delay_off == 0) {
 	/* led subsystem ask us for a blink rate */
-		*delay_on  = 1000;
+		*delay_on = 1000;
 		*delay_off = 1000;
 	}
 	if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
@@ -227,7 +224,7 @@
 			break;
 		case PCA9532_TYPE_LED:
 			led->state = pled->state;
-			led->name =  pled->name;
+			led->name = pled->name;
 			led->ldev.name = led->name;
 			led->ldev.brightness = LED_OFF;
 			led->ldev.brightness_set = pca9532_set_brightness;
@@ -254,7 +251,7 @@
 			data->idev->name = pled->name;
 			data->idev->phys = "i2c/pca9532";
 			data->idev->id.bustype = BUS_HOST;
-			data->idev->id.vendor  = 0x001f;
+			data->idev->id.vendor = 0x001f;
 			data->idev->id.product = 0x0001;
 			data->idev->id.version = 0x0100;
 			data->idev->evbit[0] = BIT_MASK(EV_SND);
diff --git a/drivers/leds/leds-wm831x-status.c b/drivers/leds/leds-wm831x-status.c
new file mode 100644
index 0000000..c586d05
--- /dev/null
+++ b/drivers/leds/leds-wm831x-status.c
@@ -0,0 +1,341 @@
+/*
+ * LED driver for WM831x status LEDs
+ *
+ * Copyright(C) 2009 Wolfson Microelectronics PLC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/status.h>
+
+
+struct wm831x_status {
+	struct led_classdev cdev;
+	struct wm831x *wm831x;
+	struct work_struct work;
+	struct mutex mutex;
+
+	spinlock_t value_lock;
+	int reg;     /* Control register */
+	int reg_val; /* Control register value */
+
+	int blink;
+	int blink_time;
+	int blink_cyc;
+	int src;
+	enum led_brightness brightness;
+};
+
+#define to_wm831x_status(led_cdev) \
+	container_of(led_cdev, struct wm831x_status, cdev)
+
+static void wm831x_status_work(struct work_struct *work)
+{
+	struct wm831x_status *led = container_of(work, struct wm831x_status,
+						 work);
+	unsigned long flags;
+
+	mutex_lock(&led->mutex);
+
+	led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
+			  WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
+	if (led->blink) {
+		led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
+		led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
+		led->reg_val |= led->blink_cyc;
+	} else {
+		if (led->brightness != LED_OFF)
+			led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
+	}
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+
+	wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
+
+	mutex_unlock(&led->mutex);
+}
+
+static void wm831x_status_set(struct led_classdev *led_cdev,
+			   enum led_brightness value)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&led->value_lock, flags);
+	led->brightness = value;
+	if (value == LED_OFF)
+		led->blink = 0;
+	schedule_work(&led->work);
+	spin_unlock_irqrestore(&led->value_lock, flags);
+}
+
+static int wm831x_status_blink_set(struct led_classdev *led_cdev,
+				   unsigned long *delay_on,
+				   unsigned long *delay_off)
+{
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	unsigned long flags;
+	int ret = 0;
+
+	/* Pick some defaults if we've not been given times */
+	if (*delay_on == 0 && *delay_off == 0) {
+		*delay_on = 250;
+		*delay_off = 250;
+	}
+
+	spin_lock_irqsave(&led->value_lock, flags);
+
+	/* We only have a limited selection of settings, see if we can
+	 * support the configuration we're being given */
+	switch (*delay_on) {
+	case 1000:
+		led->blink_time = 0;
+		break;
+	case 250:
+		led->blink_time = 1;
+		break;
+	case 125:
+		led->blink_time = 2;
+		break;
+	case 62:
+	case 63:
+		/* Actually 62.5ms */
+		led->blink_time = 3;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	if (ret == 0) {
+		switch (*delay_off / *delay_on) {
+		case 1:
+			led->blink_cyc = 0;
+			break;
+		case 3:
+			led->blink_cyc = 1;
+			break;
+		case 4:
+			led->blink_cyc = 2;
+			break;
+		case 8:
+			led->blink_cyc = 3;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+	}
+
+	if (ret == 0)
+		led->blink = 1;
+	else
+		led->blink = 0;
+
+	/* Always update; if we fail turn off blinking since we expect
+	 * a software fallback. */
+	schedule_work(&led->work);
+
+	spin_unlock_irqrestore(&led->value_lock, flags);
+
+	return ret;
+}
+
+static const char *led_src_texts[] = {
+	"otp",
+	"power",
+	"charger",
+	"soft",
+};
+
+static ssize_t wm831x_status_src_show(struct device *dev,
+				      struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	int i;
+	ssize_t ret = 0;
+
+	mutex_lock(&led->mutex);
+
+	for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
+		if (i == led->src)
+			ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
+		else
+			ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
+
+	mutex_unlock(&led->mutex);
+
+	ret += sprintf(&buf[ret], "\n");
+
+	return ret;
+}
+
+static ssize_t wm831x_status_src_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct wm831x_status *led = to_wm831x_status(led_cdev);
+	char name[20];
+	int i;
+	size_t len;
+
+	name[sizeof(name) - 1] = '\0';
+	strncpy(name, buf, sizeof(name) - 1);
+	len = strlen(name);
+
+	if (len && name[len - 1] == '\n')
+		name[len - 1] = '\0';
+
+	for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
+		if (!strcmp(name, led_src_texts[i])) {
+			mutex_lock(&led->mutex);
+
+			led->src = i;
+			schedule_work(&led->work);
+
+			mutex_unlock(&led->mutex);
+		}
+	}
+
+	return size;
+}
+
+static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
+
+static int wm831x_status_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *chip_pdata;
+	struct wm831x_status_pdata pdata;
+	struct wm831x_status *drvdata;
+	struct resource *res;
+	int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
+	int ret;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (res == NULL) {
+		dev_err(&pdev->dev, "No I/O resource\n");
+		ret = -EINVAL;
+		goto err;
+	}
+
+	drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
+	if (!drvdata)
+		return -ENOMEM;
+	dev_set_drvdata(&pdev->dev, drvdata);
+
+	drvdata->wm831x = wm831x;
+	drvdata->reg = res->start;
+
+	if (wm831x->dev->platform_data)
+		chip_pdata = wm831x->dev->platform_data;
+	else
+		chip_pdata = NULL;
+
+	memset(&pdata, 0, sizeof(pdata));
+	if (chip_pdata && chip_pdata->status[id])
+		memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
+	else
+		pdata.name = dev_name(&pdev->dev);
+
+	mutex_init(&drvdata->mutex);
+	INIT_WORK(&drvdata->work, wm831x_status_work);
+	spin_lock_init(&drvdata->value_lock);
+
+	/* We cache the configuration register and read startup values
+	 * from it. */
+	drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
+
+	if (drvdata->reg_val & WM831X_LED_MODE_MASK)
+		drvdata->brightness = LED_FULL;
+	else
+		drvdata->brightness = LED_OFF;
+
+	/* Set a default source if configured, otherwise leave the
+	 * current hardware setting.
+	 */
+	if (pdata.default_src == WM831X_STATUS_PRESERVE) {
+		drvdata->src = drvdata->reg_val;
+		drvdata->src &= WM831X_LED_SRC_MASK;
+		drvdata->src >>= WM831X_LED_SRC_SHIFT;
+	} else {
+		drvdata->src = pdata.default_src - 1;
+	}
+
+	drvdata->cdev.name = pdata.name;
+	drvdata->cdev.default_trigger = pdata.default_trigger;
+	drvdata->cdev.brightness_set = wm831x_status_set;
+	drvdata->cdev.blink_set = wm831x_status_blink_set;
+
+	ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
+		goto err_led;
+	}
+
+	ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
+	if (ret != 0)
+		dev_err(&pdev->dev,
+			"No source control for LED: %d\n", ret);
+
+	return 0;
+
+err_led:
+	led_classdev_unregister(&drvdata->cdev);
+	kfree(drvdata);
+err:
+	return ret;
+}
+
+static int wm831x_status_remove(struct platform_device *pdev)
+{
+	struct wm831x_status *drvdata = platform_get_drvdata(pdev);
+
+	device_remove_file(drvdata->cdev.dev, &dev_attr_src);
+	led_classdev_unregister(&drvdata->cdev);
+	kfree(drvdata);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_status_driver = {
+	.driver = {
+		   .name = "wm831x-status",
+		   .owner = THIS_MODULE,
+		   },
+	.probe = wm831x_status_probe,
+	.remove = wm831x_status_remove,
+};
+
+static int __devinit wm831x_status_init(void)
+{
+	return platform_driver_register(&wm831x_status_driver);
+}
+module_init(wm831x_status_init);
+
+static void wm831x_status_exit(void)
+{
+	platform_driver_unregister(&wm831x_status_driver);
+}
+module_exit(wm831x_status_exit);
+
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x status LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-status");
diff --git a/drivers/leds/ledtrig-gpio.c b/drivers/leds/ledtrig-gpio.c
index 1bc5db4..f591337 100644
--- a/drivers/leds/ledtrig-gpio.c
+++ b/drivers/leds/ledtrig-gpio.c
@@ -44,22 +44,22 @@
 			struct gpio_trig_data, work);
 	int tmp;
 
-       if (!gpio_data->gpio)
-	       return;
+	if (!gpio_data->gpio)
+		return;
 
-       tmp = gpio_get_value(gpio_data->gpio);
-       if (gpio_data->inverted)
-	       tmp = !tmp;
+	tmp = gpio_get_value(gpio_data->gpio);
+	if (gpio_data->inverted)
+		tmp = !tmp;
 
-       if (tmp) {
-               if (gpio_data->desired_brightness)
-                       led_set_brightness(gpio_data->led,
-                                       gpio_data->desired_brightness);
-               else
-                       led_set_brightness(gpio_data->led, LED_FULL);
-       } else {
-               led_set_brightness(gpio_data->led, LED_OFF);
-       }
+	if (tmp) {
+		if (gpio_data->desired_brightness)
+			led_set_brightness(gpio_data->led,
+					   gpio_data->desired_brightness);
+		else
+			led_set_brightness(gpio_data->led, LED_FULL);
+	} else {
+		led_set_brightness(gpio_data->led, LED_OFF);
+	}
 }
 
 static ssize_t gpio_trig_brightness_show(struct device *dev,
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index b4d3f7c..bd16323 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -508,7 +508,7 @@
  * uses: reading and writing a character device called /dev/lguest.  All the
  * work happens in the read(), write() and close() routines:
  */
-static struct file_operations lguest_fops = {
+static const struct file_operations lguest_fops = {
 	.owner	 = THIS_MODULE,
 	.release = close,
 	.write	 = write,
diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c
index fde377c..556f0fe 100644
--- a/drivers/macintosh/therm_adt746x.c
+++ b/drivers/macintosh/therm_adt746x.c
@@ -124,6 +124,8 @@
 	return data;
 }
 
+static struct i2c_driver thermostat_driver;
+
 static int
 attach_thermostat(struct i2c_adapter *adapter)
 {
@@ -148,7 +150,7 @@
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &thermostat_driver.clients);
 	return 0;
 }
 
diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c
index a028598..ea32c7e 100644
--- a/drivers/macintosh/therm_pm72.c
+++ b/drivers/macintosh/therm_pm72.c
@@ -286,6 +286,8 @@
 	},
 };
 
+static struct i2c_driver therm_pm72_driver;
+
 /*
  * Utility function to create an i2c_client structure and
  * attach it to one of u3 adapters
@@ -318,7 +320,7 @@
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&clt->detected, &clt->driver->clients);
+	list_add_tail(&clt->detected, &therm_pm72_driver.clients);
 	return clt;
 }
 
diff --git a/drivers/macintosh/via-pmu-led.c b/drivers/macintosh/via-pmu-led.c
index 55ad956..d242976 100644
--- a/drivers/macintosh/via-pmu-led.c
+++ b/drivers/macintosh/via-pmu-led.c
@@ -72,7 +72,7 @@
 }
 
 static struct led_classdev pmu_led = {
-	.name = "pmu-front-led",
+	.name = "pmu-led::front",
 #ifdef CONFIG_ADB_PMU_LED_IDE
 	.default_trigger = "ide-disk",
 #endif
diff --git a/drivers/macintosh/windfarm_lm75_sensor.c b/drivers/macintosh/windfarm_lm75_sensor.c
index 529886c..ed6426a 100644
--- a/drivers/macintosh/windfarm_lm75_sensor.c
+++ b/drivers/macintosh/windfarm_lm75_sensor.c
@@ -115,6 +115,8 @@
 	return rc;
 }
 
+static struct i2c_driver wf_lm75_driver;
+
 static struct i2c_client *wf_lm75_create(struct i2c_adapter *adapter,
 					     u8 addr, int ds1775,
 					     const char *loc)
@@ -157,7 +159,7 @@
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_lm75_driver.clients);
 	return client;
  fail:
 	return NULL;
diff --git a/drivers/macintosh/windfarm_max6690_sensor.c b/drivers/macintosh/windfarm_max6690_sensor.c
index e2a55ec..a67b349 100644
--- a/drivers/macintosh/windfarm_max6690_sensor.c
+++ b/drivers/macintosh/windfarm_max6690_sensor.c
@@ -88,6 +88,8 @@
 	return rc;
 }
 
+static struct i2c_driver wf_max6690_driver;
+
 static struct i2c_client *wf_max6690_create(struct i2c_adapter *adapter,
 					    u8 addr, const char *loc)
 {
@@ -119,7 +121,7 @@
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_max6690_driver.clients);
 	return client;
 
  fail:
diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c
index 5da729e..e20330a 100644
--- a/drivers/macintosh/windfarm_smu_sat.c
+++ b/drivers/macintosh/windfarm_smu_sat.c
@@ -194,6 +194,8 @@
 	.owner		= THIS_MODULE,
 };
 
+static struct i2c_driver wf_sat_driver;
+
 static void wf_sat_create(struct i2c_adapter *adapter, struct device_node *dev)
 {
 	struct i2c_board_info info;
@@ -222,7 +224,7 @@
 	 * Let i2c-core delete that device on driver removal.
 	 * This is safe because i2c-core holds the core_lock mutex for us.
 	 */
-	list_add_tail(&client->detected, &client->driver->clients);
+	list_add_tail(&client->detected, &wf_sat_driver.clients);
 }
 
 static int wf_sat_probe(struct i2c_client *client,
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 376f1ab..23e76fe 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -130,7 +130,7 @@
 	/*
 	 * A list of ios that arrived while we were suspended.
 	 */
-	atomic_t pending[2];
+	atomic_t pending;
 	wait_queue_head_t wait;
 	struct work_struct work;
 	struct bio_list deferred;
@@ -453,14 +453,13 @@
 {
 	struct mapped_device *md = io->md;
 	int cpu;
-	int rw = bio_data_dir(io->bio);
 
 	io->start_time = jiffies;
 
 	cpu = part_stat_lock();
 	part_round_stats(cpu, &dm_disk(md)->part0);
 	part_stat_unlock();
-	dm_disk(md)->part0.in_flight[rw] = atomic_inc_return(&md->pending[rw]);
+	dm_disk(md)->part0.in_flight = atomic_inc_return(&md->pending);
 }
 
 static void end_io_acct(struct dm_io *io)
@@ -480,9 +479,8 @@
 	 * After this is decremented the bio must not be touched if it is
 	 * a barrier.
 	 */
-	dm_disk(md)->part0.in_flight[rw] = pending =
-		atomic_dec_return(&md->pending[rw]);
-	pending += atomic_read(&md->pending[rw^0x1]);
+	dm_disk(md)->part0.in_flight = pending =
+		atomic_dec_return(&md->pending);
 
 	/* nudge anyone waiting on suspend queue */
 	if (!pending)
@@ -1787,8 +1785,7 @@
 	if (!md->disk)
 		goto bad_disk;
 
-	atomic_set(&md->pending[0], 0);
-	atomic_set(&md->pending[1], 0);
+	atomic_set(&md->pending, 0);
 	init_waitqueue_head(&md->wait);
 	INIT_WORK(&md->work, dm_wq_work);
 	init_waitqueue_head(&md->eventq);
@@ -2091,8 +2088,7 @@
 				break;
 			}
 			spin_unlock_irqrestore(q->queue_lock, flags);
-		} else if (!atomic_read(&md->pending[0]) &&
-					!atomic_read(&md->pending[1]))
+		} else if (!atomic_read(&md->pending))
 			break;
 
 		if (interruptible == TASK_INTERRUPTIBLE &&
diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c
index 3750ff4..c37790a 100644
--- a/drivers/media/dvb/dvb-core/dmxdev.c
+++ b/drivers/media/dvb/dvb-core/dmxdev.c
@@ -20,6 +20,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
@@ -1203,7 +1204,7 @@
 	return mask;
 }
 
-static struct file_operations dvb_dvr_fops = {
+static const struct file_operations dvb_dvr_fops = {
 	.owner = THIS_MODULE,
 	.read = dvb_dvr_read,
 	.write = dvb_dvr_write,
diff --git a/drivers/media/dvb/dvb-core/dvb_demux.c b/drivers/media/dvb/dvb-core/dvb_demux.c
index eef6d36..91c537b 100644
--- a/drivers/media/dvb/dvb-core/dvb_demux.c
+++ b/drivers/media/dvb/dvb-core/dvb_demux.c
@@ -21,6 +21,7 @@
  *
  */
 
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/slab.h>
 #include <linux/vmalloc.h>
diff --git a/drivers/media/dvb/firewire/firedtv-ci.c b/drivers/media/dvb/firewire/firedtv-ci.c
index eeb80d0..853e04b 100644
--- a/drivers/media/dvb/firewire/firedtv-ci.c
+++ b/drivers/media/dvb/firewire/firedtv-ci.c
@@ -215,7 +215,7 @@
 	return POLLIN;
 }
 
-static struct file_operations fdtv_ca_fops = {
+static const struct file_operations fdtv_ca_fops = {
 	.owner		= THIS_MODULE,
 	.ioctl		= dvb_generic_ioctl,
 	.open		= dvb_generic_open,
diff --git a/drivers/media/radio/radio-cadet.c b/drivers/media/radio/radio-cadet.c
index 8b14401..482d0f3b 100644
--- a/drivers/media/radio/radio-cadet.c
+++ b/drivers/media/radio/radio-cadet.c
@@ -38,6 +38,7 @@
 #include <linux/videodev2.h>	/* V4L2 API defs		*/
 #include <linux/param.h>
 #include <linux/pnp.h>
+#include <linux/sched.h>
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 657c481..10230cb 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -1325,7 +1325,7 @@
 	mutex_unlock(&sbuf->cam->s_mutex);
 }
 
-static struct vm_operations_struct cafe_v4l_vm_ops = {
+static const struct vm_operations_struct cafe_v4l_vm_ops = {
 	.open = cafe_v4l_vm_open,
 	.close = cafe_v4l_vm_close
 };
diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c
index 43ab0ad..2377313 100644
--- a/drivers/media/video/cpia.c
+++ b/drivers/media/video/cpia.c
@@ -31,6 +31,7 @@
 #include <linux/init.h>
 #include <linux/fs.h>
 #include <linux/vmalloc.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/proc_fs.h>
 #include <linux/ctype.h>
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 74092f4..88987a5 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -1496,7 +1496,7 @@
 }
 
 
-static struct vm_operations_struct et61x251_vm_ops = {
+static const struct vm_operations_struct et61x251_vm_ops = {
 	.open = et61x251_vm_open,
 	.close = et61x251_vm_close,
 };
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index cf6540d..23d3fb7 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -99,7 +99,7 @@
 		frame->v4l2_buf.flags &= ~V4L2_BUF_FLAG_MAPPED;
 }
 
-static struct vm_operations_struct gspca_vm_ops = {
+static const struct vm_operations_struct gspca_vm_ops = {
 	.open		= gspca_vm_open,
 	.close		= gspca_vm_close,
 };
diff --git a/drivers/media/video/meye.c b/drivers/media/video/meye.c
index d0765be..4b1bc05 100644
--- a/drivers/media/video/meye.c
+++ b/drivers/media/video/meye.c
@@ -1589,7 +1589,7 @@
 	meye.vma_use_count[idx]--;
 }
 
-static struct vm_operations_struct meye_vm_ops = {
+static const struct vm_operations_struct meye_vm_ops = {
 	.open		= meye_vm_open,
 	.close		= meye_vm_close,
 };
diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c
index 5ab7c5a..65ac474 100644
--- a/drivers/media/video/sh_mobile_ceu_camera.c
+++ b/drivers/media/video/sh_mobile_ceu_camera.c
@@ -404,7 +404,7 @@
 		 "SuperH Mobile CEU driver attached to camera %d\n",
 		 icd->devnum);
 
-	clk_enable(pcdev->clk);
+	pm_runtime_get_sync(ici->v4l2_dev.dev);
 
 	ceu_write(pcdev, CAPSR, 1 << 16); /* reset */
 	while (ceu_read(pcdev, CSTSR) & 1)
@@ -438,7 +438,7 @@
 	}
 	spin_unlock_irqrestore(&pcdev->lock, flags);
 
-	clk_disable(pcdev->clk);
+	pm_runtime_put_sync(ici->v4l2_dev.dev);
 
 	dev_info(icd->dev.parent,
 		 "SuperH Mobile CEU driver detached from camera %d\n",
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 9d84c94..4a7711c 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -2077,7 +2077,7 @@
 }
 
 
-static struct vm_operations_struct sn9c102_vm_ops = {
+static const struct vm_operations_struct sn9c102_vm_ops = {
 	.open = sn9c102_vm_open,
 	.close = sn9c102_vm_close,
 };
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 0b996ea..6b41865 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -790,7 +790,7 @@
 	if (sbuf->mapcount == 0)
 		sbuf->v4lbuf.flags &= ~V4L2_BUF_FLAG_MAPPED;
 }
-static struct vm_operations_struct stk_v4l_vm_ops = {
+static const struct vm_operations_struct stk_v4l_vm_ops = {
 	.open = stk_v4l_vm_open,
 	.close = stk_v4l_vm_close
 };
diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c
index 9e73515..a2bdd80 100644
--- a/drivers/media/video/uvc/uvc_v4l2.c
+++ b/drivers/media/video/uvc/uvc_v4l2.c
@@ -1069,7 +1069,7 @@
 	buffer->vma_use_count--;
 }
 
-static struct vm_operations_struct uvc_vm_ops = {
+static const struct vm_operations_struct uvc_vm_ops = {
 	.open		= uvc_vm_open,
 	.close		= uvc_vm_close,
 };
diff --git a/drivers/media/video/videobuf-dma-contig.c b/drivers/media/video/videobuf-dma-contig.c
index d09ce83a..635ffc7 100644
--- a/drivers/media/video/videobuf-dma-contig.c
+++ b/drivers/media/video/videobuf-dma-contig.c
@@ -105,7 +105,7 @@
 	}
 }
 
-static struct vm_operations_struct videobuf_vm_ops = {
+static const struct vm_operations_struct videobuf_vm_ops = {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
 };
diff --git a/drivers/media/video/videobuf-dma-sg.c b/drivers/media/video/videobuf-dma-sg.c
index a8dd22a..53cdd67 100644
--- a/drivers/media/video/videobuf-dma-sg.c
+++ b/drivers/media/video/videobuf-dma-sg.c
@@ -394,7 +394,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
 {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
diff --git a/drivers/media/video/videobuf-vmalloc.c b/drivers/media/video/videobuf-vmalloc.c
index 30ae30f..35f3900 100644
--- a/drivers/media/video/videobuf-vmalloc.c
+++ b/drivers/media/video/videobuf-vmalloc.c
@@ -116,7 +116,7 @@
 	return;
 }
 
-static struct vm_operations_struct videobuf_vm_ops =
+static const struct vm_operations_struct videobuf_vm_ops =
 {
 	.open     = videobuf_vm_open,
 	.close    = videobuf_vm_close,
diff --git a/drivers/media/video/vino.c b/drivers/media/video/vino.c
index cd6a344..b034a81 100644
--- a/drivers/media/video/vino.c
+++ b/drivers/media/video/vino.c
@@ -3857,7 +3857,7 @@
 	dprintk("vino_vm_close(): count = %d\n", fb->map_count);
 }
 
-static struct vm_operations_struct vino_vm_ops = {
+static const struct vm_operations_struct vino_vm_ops = {
 	.open	= vino_vm_open,
 	.close	= vino_vm_close,
 };
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index b3c6436..312a713 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -935,7 +935,7 @@
 }
 
 
-static struct vm_operations_struct zc0301_vm_ops = {
+static const struct vm_operations_struct zc0301_vm_ops = {
 	.open = zc0301_vm_open,
 	.close = zc0301_vm_close,
 };
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index bcdefb1..47137de 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -3172,7 +3172,7 @@
 	mutex_unlock(&zr->resource_lock);
 }
 
-static struct vm_operations_struct zoran_vm_ops = {
+static const struct vm_operations_struct zoran_vm_ops = {
 	.open = zoran_vm_open,
 	.close = zoran_vm_close,
 };
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
index 5447da1..6134810 100644
--- a/drivers/mfd/ab3100-core.c
+++ b/drivers/mfd/ab3100-core.c
@@ -57,8 +57,6 @@
  * The AB3100 is usually assigned address 0x48 (7-bit)
  * The chip is defined in the platform i2c_board_data section.
  */
-static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
-I2C_CLIENT_INSMOD_1(ab3100);
 
 u8 ab3100_get_chip_type(struct ab3100 *ab3100)
 {
@@ -966,7 +964,7 @@
 }
 
 static const struct i2c_device_id ab3100_id[] = {
-	{ "ab3100", ab3100 },
+	{ "ab3100", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, ab3100_id);
diff --git a/drivers/mfd/ucb1400_core.c b/drivers/mfd/ucb1400_core.c
index 2afc080..fa294b6 100644
--- a/drivers/mfd/ucb1400_core.c
+++ b/drivers/mfd/ucb1400_core.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/sched.h>
 #include <linux/ucb1400.h>
 
 unsigned int ucb1400_adc_read(struct snd_ac97 *ac97, u16 adc_channel,
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index df1f86b..a2ea383 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -249,5 +249,6 @@
 source "drivers/misc/c2port/Kconfig"
 source "drivers/misc/eeprom/Kconfig"
 source "drivers/misc/cb710/Kconfig"
+source "drivers/misc/iwmc3200top/Kconfig"
 
 endif # MISC_DEVICES
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index f982d2e..e311267 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -21,5 +21,6 @@
 obj-$(CONFIG_ISL29003)		+= isl29003.o
 obj-$(CONFIG_EP93XX_PWM)	+= ep93xx_pwm.o
 obj-$(CONFIG_C2PORT)		+= c2port/
+obj-$(CONFIG_IWMC3200TOP)      += iwmc3200top/
 obj-y				+= eeprom/
 obj-y				+= cb710/
diff --git a/drivers/misc/eeprom/max6875.c b/drivers/misc/eeprom/max6875.c
index 3c0c58e..5a6b2bc 100644
--- a/drivers/misc/eeprom/max6875.c
+++ b/drivers/misc/eeprom/max6875.c
@@ -33,12 +33,6 @@
 #include <linux/i2c.h>
 #include <linux/mutex.h>
 
-/* Do not scan - the MAX6875 access method will write to some EEPROM chips */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/* Insmod parameters */
-I2C_CLIENT_INSMOD_1(max6875);
-
 /* The MAX6875 can only read/write 16 bytes at a time */
 #define SLICE_SIZE			16
 #define SLICE_BITS			4
@@ -146,31 +140,21 @@
 	.read = max6875_read,
 };
 
-/* Return 0 if detection is successful, -ENODEV otherwise */
-static int max6875_detect(struct i2c_client *client, int kind,
-			  struct i2c_board_info *info)
+static int max6875_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adapter = client->adapter;
+	struct max6875_data *data;
+	int err;
 
 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WRITE_BYTE_DATA
 				     | I2C_FUNC_SMBUS_READ_BYTE))
 		return -ENODEV;
 
-	/* Only check even addresses */
+	/* Only bind to even addresses */
 	if (client->addr & 1)
 		return -ENODEV;
 
-	strlcpy(info->type, "max6875", I2C_NAME_SIZE);
-
-	return 0;
-}
-
-static int max6875_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
-{
-	struct max6875_data *data;
-	int err;
-
 	if (!(data = kzalloc(sizeof(struct max6875_data), GFP_KERNEL)))
 		return -ENOMEM;
 
@@ -222,9 +206,6 @@
 	.probe		= max6875_probe,
 	.remove		= max6875_remove,
 	.id_table	= max6875_id,
-
-	.detect		= max6875_detect,
-	.address_data	= &addr_data,
 };
 
 static int __init max6875_init(void)
diff --git a/drivers/misc/iwmc3200top/Kconfig b/drivers/misc/iwmc3200top/Kconfig
new file mode 100644
index 0000000..9e4b88f
--- /dev/null
+++ b/drivers/misc/iwmc3200top/Kconfig
@@ -0,0 +1,20 @@
+config IWMC3200TOP
+        tristate "Intel Wireless MultiCom Top Driver"
+        depends on MMC && EXPERIMENTAL
+        select FW_LOADER
+	---help---
+	  Intel Wireless MultiCom 3200 Top driver is responsible for
+	  for firmware load and enabled coms enumeration
+
+config IWMC3200TOP_DEBUG
+	bool "Enable full debug output of iwmc3200top Driver"
+	depends on IWMC3200TOP
+	---help---
+	  Enable full debug output of iwmc3200top Driver
+
+config IWMC3200TOP_DEBUGFS
+	bool "Enable Debugfs debugging interface for iwmc3200top"
+	depends on IWMC3200TOP
+	---help---
+	  Enable creation of debugfs files for iwmc3200top
+
diff --git a/drivers/misc/iwmc3200top/Makefile b/drivers/misc/iwmc3200top/Makefile
new file mode 100644
index 0000000..fbf53fb
--- /dev/null
+++ b/drivers/misc/iwmc3200top/Makefile
@@ -0,0 +1,29 @@
+# iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+# drivers/misc/iwmc3200top/Makefile
+#
+# Copyright (C) 2009 Intel Corporation. All rights reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License version
+# 2 as published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+#
+# Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+#  -
+#
+#
+
+obj-$(CONFIG_IWMC3200TOP)	+= iwmc3200top.o
+iwmc3200top-objs	:= main.o fw-download.o
+iwmc3200top-$(CONFIG_IWMC3200TOP_DEBUG) += log.o
+iwmc3200top-$(CONFIG_IWMC3200TOP_DEBUGFS) += debugfs.o
diff --git a/drivers/misc/iwmc3200top/debugfs.c b/drivers/misc/iwmc3200top/debugfs.c
new file mode 100644
index 0000000..0c8ea0a1
--- /dev/null
+++ b/drivers/misc/iwmc3200top/debugfs.c
@@ -0,0 +1,133 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/debufs.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+#include <linux/debugfs.h>
+
+#include "iwmc3200top.h"
+#include "fw-msg.h"
+#include "log.h"
+#include "debugfs.h"
+
+
+
+/*      Constants definition        */
+#define HEXADECIMAL_RADIX	16
+
+/*      Functions definition        */
+
+
+#define DEBUGFS_ADD(name, parent) do {					\
+	dbgfs->dbgfs_##parent##_files.file_##name =			\
+	debugfs_create_file(#name, 0644, dbgfs->dir_##parent, priv,	\
+				&iwmct_dbgfs_##name##_ops);		\
+} while (0)
+
+#define DEBUGFS_RM(name)  do {		\
+	debugfs_remove(name);		\
+	name = NULL;			\
+} while (0)
+
+#define DEBUGFS_READ_FUNC(name)						\
+ssize_t iwmct_dbgfs_##name##_read(struct file *file,			\
+				  char __user *user_buf,		\
+				  size_t count, loff_t *ppos);
+
+#define DEBUGFS_WRITE_FUNC(name)					\
+ssize_t iwmct_dbgfs_##name##_write(struct file *file,			\
+				   const char __user *user_buf,		\
+				   size_t count, loff_t *ppos);
+
+#define DEBUGFS_READ_FILE_OPS(name)					\
+	DEBUGFS_READ_FUNC(name)						\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {  \
+		.read = iwmct_dbgfs_##name##_read,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+#define DEBUGFS_WRITE_FILE_OPS(name)					\
+	DEBUGFS_WRITE_FUNC(name)					\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {  \
+		.write = iwmct_dbgfs_##name##_write,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+#define DEBUGFS_READ_WRITE_FILE_OPS(name)				\
+	DEBUGFS_READ_FUNC(name)						\
+	DEBUGFS_WRITE_FUNC(name)					\
+	static const struct file_operations iwmct_dbgfs_##name##_ops = {\
+		.write = iwmct_dbgfs_##name##_write,			\
+		.read = iwmct_dbgfs_##name##_read,			\
+		.open = iwmct_dbgfs_open_file_generic,			\
+	};
+
+
+/*      Debugfs file ops definitions        */
+
+/*
+ * Create the debugfs files and directories
+ *
+ */
+void iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name)
+{
+	struct iwmct_debugfs *dbgfs;
+
+	dbgfs = kzalloc(sizeof(struct iwmct_debugfs), GFP_KERNEL);
+	if (!dbgfs) {
+		LOG_ERROR(priv, DEBUGFS, "failed to allocate %zd bytes\n",
+					sizeof(struct iwmct_debugfs));
+		return;
+	}
+
+	priv->dbgfs = dbgfs;
+	dbgfs->name = name;
+	dbgfs->dir_drv = debugfs_create_dir(name, NULL);
+	if (!dbgfs->dir_drv) {
+		LOG_ERROR(priv, DEBUGFS, "failed to create debugfs dir\n");
+		return;
+	}
+
+	return;
+}
+
+/**
+ * Remove the debugfs files and directories
+ *
+ */
+void iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs)
+{
+	if (!dbgfs)
+		return;
+
+	DEBUGFS_RM(dbgfs->dir_drv);
+	kfree(dbgfs);
+	dbgfs = NULL;
+}
+
diff --git a/drivers/misc/iwmc3200top/debugfs.h b/drivers/misc/iwmc3200top/debugfs.h
new file mode 100644
index 0000000..71d4575
--- /dev/null
+++ b/drivers/misc/iwmc3200top/debugfs.h
@@ -0,0 +1,58 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/debufs.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __DEBUGFS_H__
+#define __DEBUGFS_H__
+
+
+#ifdef CONFIG_IWMC3200TOP_DEBUGFS
+
+struct iwmct_debugfs {
+	const char *name;
+	struct dentry *dir_drv;
+	struct dir_drv_files {
+	} dbgfs_drv_files;
+};
+
+void iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name);
+void iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs);
+
+#else /* CONFIG_IWMC3200TOP_DEBUGFS */
+
+struct iwmct_debugfs;
+
+static inline void
+iwmct_dbgfs_register(struct iwmct_priv *priv, const char *name)
+{}
+
+static inline void
+iwmct_dbgfs_unregister(struct iwmct_debugfs *dbgfs)
+{}
+
+#endif /* CONFIG_IWMC3200TOP_DEBUGFS */
+
+#endif /* __DEBUGFS_H__ */
+
diff --git a/drivers/misc/iwmc3200top/fw-download.c b/drivers/misc/iwmc3200top/fw-download.c
new file mode 100644
index 0000000..33cb693
--- /dev/null
+++ b/drivers/misc/iwmc3200top/fw-download.c
@@ -0,0 +1,359 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/fw-download.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/firmware.h>
+#include <linux/mmc/sdio_func.h>
+#include <asm/unaligned.h>
+
+#include "iwmc3200top.h"
+#include "log.h"
+#include "fw-msg.h"
+
+#define CHECKSUM_BYTES_NUM sizeof(u32)
+
+/**
+  init parser struct with file
+ */
+static int iwmct_fw_parser_init(struct iwmct_priv *priv, const u8 *file,
+			      size_t file_size, size_t block_size)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_hdr *fw_hdr = &parser->versions;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	LOG_INFO(priv, FW_DOWNLOAD, "file_size=%zd\n", file_size);
+
+	parser->file = file;
+	parser->file_size = file_size;
+	parser->cur_pos = 0;
+	parser->buf = NULL;
+
+	parser->buf = kzalloc(block_size, GFP_KERNEL);
+	if (!parser->buf) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "kzalloc error\n");
+		return -ENOMEM;
+	}
+	parser->buf_size = block_size;
+
+	/* extract fw versions */
+	memcpy(fw_hdr, parser->file, sizeof(struct iwmct_fw_hdr));
+	LOG_INFO(priv, FW_DOWNLOAD, "fw versions are:\n"
+		"top %u.%u.%u gps %u.%u.%u bt %u.%u.%u tic %s\n",
+		fw_hdr->top_major, fw_hdr->top_minor, fw_hdr->top_revision,
+		fw_hdr->gps_major, fw_hdr->gps_minor, fw_hdr->gps_revision,
+		fw_hdr->bt_major, fw_hdr->bt_minor, fw_hdr->bt_revision,
+		fw_hdr->tic_name);
+
+	parser->cur_pos += sizeof(struct iwmct_fw_hdr);
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+static bool iwmct_checksum(struct iwmct_priv *priv)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	__le32 *file = (__le32 *)parser->file;
+	int i, pad, steps;
+	u32 accum = 0;
+	u32 checksum;
+	u32 mask = 0xffffffff;
+
+	pad = (parser->file_size - CHECKSUM_BYTES_NUM) % 4;
+	steps =  (parser->file_size - CHECKSUM_BYTES_NUM) / 4;
+
+	LOG_INFO(priv, FW_DOWNLOAD, "pad=%d steps=%d\n", pad, steps);
+
+	for (i = 0; i < steps; i++)
+		accum += le32_to_cpu(file[i]);
+
+	if (pad) {
+		mask <<= 8 * (4 - pad);
+		accum += le32_to_cpu(file[steps]) & mask;
+	}
+
+	checksum = get_unaligned_le32((__le32 *)(parser->file +
+			parser->file_size - CHECKSUM_BYTES_NUM));
+
+	LOG_INFO(priv, FW_DOWNLOAD,
+		"compare checksum accum=0x%x to checksum=0x%x\n",
+		accum, checksum);
+
+	return checksum == accum;
+}
+
+static int iwmct_parse_next_section(struct iwmct_priv *priv, const u8 **p_sec,
+				  size_t *sec_size, __le32 *sec_addr)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_dbg *dbg = &priv->dbg;
+	struct iwmct_fw_sec_hdr *sec_hdr;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	while (parser->cur_pos + sizeof(struct iwmct_fw_sec_hdr)
+		<= parser->file_size) {
+
+		sec_hdr = (struct iwmct_fw_sec_hdr *)
+				(parser->file + parser->cur_pos);
+		parser->cur_pos += sizeof(struct iwmct_fw_sec_hdr);
+
+		LOG_INFO(priv, FW_DOWNLOAD,
+			"sec hdr: type=%s addr=0x%x size=%d\n",
+			sec_hdr->type, sec_hdr->target_addr,
+			sec_hdr->data_size);
+
+		if (strcmp(sec_hdr->type, "ENT") == 0)
+			parser->entry_point = le32_to_cpu(sec_hdr->target_addr);
+		else if (strcmp(sec_hdr->type, "LBL") == 0)
+			strcpy(dbg->label_fw, parser->file + parser->cur_pos);
+		else if (((strcmp(sec_hdr->type, "TOP") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_TOP_MSK)) ||
+			 ((strcmp(sec_hdr->type, "GPS") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_GPS_MSK)) ||
+			 ((strcmp(sec_hdr->type, "BTH") == 0) &&
+			  (priv->barker & BARKER_DNLOAD_BT_MSK))) {
+			*sec_addr = sec_hdr->target_addr;
+			*sec_size = le32_to_cpu(sec_hdr->data_size);
+			*p_sec = parser->file + parser->cur_pos;
+			parser->cur_pos += le32_to_cpu(sec_hdr->data_size);
+			return 1;
+		} else if (strcmp(sec_hdr->type, "LOG") != 0)
+			LOG_WARNING(priv, FW_DOWNLOAD,
+				    "skipping section type %s\n",
+				    sec_hdr->type);
+
+		parser->cur_pos += le32_to_cpu(sec_hdr->data_size);
+		LOG_INFO(priv, FW_DOWNLOAD,
+			"finished with section cur_pos=%zd\n", parser->cur_pos);
+	}
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+static int iwmct_download_section(struct iwmct_priv *priv, const u8 *p_sec,
+				size_t sec_size, __le32 addr)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_load_hdr *hdr = (struct iwmct_fw_load_hdr *)parser->buf;
+	const u8 *cur_block = p_sec;
+	size_t sent = 0;
+	int cnt = 0;
+	int ret = 0;
+	u32 cmd = 0;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+	LOG_INFO(priv, FW_DOWNLOAD, "Download address 0x%x size 0x%zx\n",
+				addr, sec_size);
+
+	while (sent < sec_size) {
+		int i;
+		u32 chksm = 0;
+		u32 reset = atomic_read(&priv->reset);
+		/* actual FW data */
+		u32 data_size = min(parser->buf_size - sizeof(*hdr),
+				    sec_size - sent);
+		/* Pad to block size */
+		u32 trans_size = (data_size + sizeof(*hdr) +
+				  IWMC_SDIO_BLK_SIZE - 1) &
+				  ~(IWMC_SDIO_BLK_SIZE - 1);
+		++cnt;
+
+		/* in case of reset, interrupt FW DOWNLAOD */
+		if (reset) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				 "Reset detected. Abort FW download!!!");
+			ret = -ECANCELED;
+			goto exit;
+		}
+
+		memset(parser->buf, 0, parser->buf_size);
+		cmd |= IWMC_OPCODE_WRITE << CMD_HDR_OPCODE_POS;
+		cmd |= IWMC_CMD_SIGNATURE << CMD_HDR_SIGNATURE_POS;
+		cmd |= (priv->dbg.direct ? 1 : 0) << CMD_HDR_DIRECT_ACCESS_POS;
+		cmd |= (priv->dbg.checksum ? 1 : 0) << CMD_HDR_USE_CHECKSUM_POS;
+		hdr->data_size = cpu_to_le32(data_size);
+		hdr->target_addr = addr;
+
+		/* checksum is allowed for sizes divisible by 4 */
+		if (data_size & 0x3)
+			cmd &= ~CMD_HDR_USE_CHECKSUM_MSK;
+
+		memcpy(hdr->data, cur_block, data_size);
+
+
+		if (cmd & CMD_HDR_USE_CHECKSUM_MSK) {
+
+			chksm = data_size + le32_to_cpu(addr) + cmd;
+			for (i = 0; i < data_size >> 2; i++)
+				chksm += ((u32 *)cur_block)[i];
+
+			hdr->block_chksm = cpu_to_le32(chksm);
+			LOG_INFO(priv, FW_DOWNLOAD, "Checksum = 0x%X\n",
+				 hdr->block_chksm);
+		}
+
+		LOG_INFO(priv, FW_DOWNLOAD, "trans#%d, len=%d, sent=%zd, "
+				"sec_size=%zd, startAddress 0x%X\n",
+				cnt, trans_size, sent, sec_size, addr);
+
+		if (priv->dbg.dump)
+			LOG_HEXDUMP(FW_DOWNLOAD, parser->buf, trans_size);
+
+
+		hdr->cmd = cpu_to_le32(cmd);
+		/* send it down */
+		/* TODO: add more proper sending and error checking */
+		ret = iwmct_tx(priv, 0, parser->buf, trans_size);
+		if (ret != 0) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				"iwmct_tx returned %d\n", ret);
+			goto exit;
+		}
+
+		addr = cpu_to_le32(le32_to_cpu(addr) + data_size);
+		sent += data_size;
+		cur_block = p_sec + sent;
+
+		if (priv->dbg.blocks && (cnt + 1) >= priv->dbg.blocks) {
+			LOG_INFO(priv, FW_DOWNLOAD,
+				"Block number limit is reached [%d]\n",
+				priv->dbg.blocks);
+			break;
+		}
+	}
+
+	if (sent < sec_size)
+		ret = -EINVAL;
+exit:
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return ret;
+}
+
+static int iwmct_kick_fw(struct iwmct_priv *priv, bool jump)
+{
+	struct iwmct_parser *parser = &priv->parser;
+	struct iwmct_fw_load_hdr *hdr = (struct iwmct_fw_load_hdr *)parser->buf;
+	int ret;
+	u32 cmd;
+
+	LOG_INFOEX(priv, INIT, "-->\n");
+
+	memset(parser->buf, 0, parser->buf_size);
+	cmd = IWMC_CMD_SIGNATURE << CMD_HDR_SIGNATURE_POS;
+	if (jump) {
+		cmd |= IWMC_OPCODE_JUMP << CMD_HDR_OPCODE_POS;
+		hdr->target_addr = cpu_to_le32(parser->entry_point);
+		LOG_INFO(priv, FW_DOWNLOAD, "jump address 0x%x\n",
+				parser->entry_point);
+	} else {
+		cmd |= IWMC_OPCODE_LAST_COMMAND << CMD_HDR_OPCODE_POS;
+		LOG_INFO(priv, FW_DOWNLOAD, "last command\n");
+	}
+
+	hdr->cmd = cpu_to_le32(cmd);
+
+	LOG_HEXDUMP(FW_DOWNLOAD, parser->buf, sizeof(*hdr));
+	/* send it down */
+	/* TODO: add more proper sending and error checking */
+	ret = iwmct_tx(priv, 0, parser->buf, IWMC_SDIO_BLK_SIZE);
+	if (ret)
+		LOG_INFO(priv, FW_DOWNLOAD, "iwmct_tx returned %d", ret);
+
+	LOG_INFOEX(priv, INIT, "<--\n");
+	return 0;
+}
+
+int iwmct_fw_load(struct iwmct_priv *priv)
+{
+	const struct firmware *raw = NULL;
+	__le32 addr;
+	size_t len;
+	const u8 *pdata;
+	const u8 *name = "iwmc3200top.1.fw";
+	int ret = 0;
+
+	/* clear parser struct */
+	memset(&priv->parser, 0, sizeof(struct iwmct_parser));
+	if (!name) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* get the firmware */
+	ret = request_firmware(&raw, name, &priv->func->dev);
+	if (ret < 0) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "%s request_firmware failed %d\n",
+			  name, ret);
+		goto exit;
+	}
+
+	if (raw->size < sizeof(struct iwmct_fw_sec_hdr)) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "%s smaller then (%zd) (%zd)\n",
+			  name, sizeof(struct iwmct_fw_sec_hdr), raw->size);
+		goto exit;
+	}
+
+	LOG_INFO(priv, FW_DOWNLOAD, "Read firmware '%s'\n", name);
+
+	ret = iwmct_fw_parser_init(priv, raw->data, raw->size, priv->trans_len);
+	if (ret < 0) {
+		LOG_ERROR(priv, FW_DOWNLOAD,
+			  "iwmct_parser_init failed: Reason %d\n", ret);
+		goto exit;
+	}
+
+	/* checksum  */
+	if (!iwmct_checksum(priv)) {
+		LOG_ERROR(priv, FW_DOWNLOAD, "checksum error\n");
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	/* download firmware to device */
+	while (iwmct_parse_next_section(priv, &pdata, &len, &addr)) {
+		if (iwmct_download_section(priv, pdata, len, addr)) {
+			LOG_ERROR(priv, FW_DOWNLOAD,
+				  "%s download section failed\n", name);
+			ret = -EIO;
+			goto exit;
+		}
+	}
+
+	iwmct_kick_fw(priv, !!(priv->barker & BARKER_DNLOAD_JUMP_MSK));
+
+exit:
+	kfree(priv->parser.buf);
+
+	if (raw)
+		release_firmware(raw);
+
+	raw = NULL;
+
+	return ret;
+}
diff --git a/drivers/misc/iwmc3200top/fw-msg.h b/drivers/misc/iwmc3200top/fw-msg.h
new file mode 100644
index 0000000..9e26b75
--- /dev/null
+++ b/drivers/misc/iwmc3200top/fw-msg.h
@@ -0,0 +1,113 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/fw-msg.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __FWMSG_H__
+#define __FWMSG_H__
+
+#define COMM_TYPE_D2H           	0xFF
+#define COMM_TYPE_H2D           	0xEE
+
+#define COMM_CATEGORY_OPERATIONAL      	0x00
+#define COMM_CATEGORY_DEBUG            	0x01
+#define COMM_CATEGORY_TESTABILITY      	0x02
+#define COMM_CATEGORY_DIAGNOSTICS      	0x03
+
+#define OP_DBG_ZSTR_MSG			cpu_to_le16(0x1A)
+
+#define FW_LOG_SRC_MAX			32
+#define FW_LOG_SRC_ALL			255
+
+#define FW_STRING_TABLE_ADDR		cpu_to_le32(0x0C000000)
+
+#define CMD_DBG_LOG_LEVEL		cpu_to_le16(0x0001)
+#define CMD_TST_DEV_RESET		cpu_to_le16(0x0060)
+#define CMD_TST_FUNC_RESET		cpu_to_le16(0x0062)
+#define CMD_TST_IFACE_RESET		cpu_to_le16(0x0064)
+#define CMD_TST_CPU_UTILIZATION		cpu_to_le16(0x0065)
+#define CMD_TST_TOP_DEEP_SLEEP		cpu_to_le16(0x0080)
+#define CMD_TST_WAKEUP			cpu_to_le16(0x0081)
+#define CMD_TST_FUNC_WAKEUP		cpu_to_le16(0x0082)
+#define CMD_TST_FUNC_DEEP_SLEEP_REQUEST	cpu_to_le16(0x0083)
+#define CMD_TST_GET_MEM_DUMP		cpu_to_le16(0x0096)
+
+#define OP_OPR_ALIVE			cpu_to_le16(0x0010)
+#define OP_OPR_CMD_ACK			cpu_to_le16(0x001F)
+#define OP_OPR_CMD_NACK			cpu_to_le16(0x0020)
+#define OP_TST_MEM_DUMP			cpu_to_le16(0x0043)
+
+#define CMD_FLAG_PADDING_256		0x80
+
+#define FW_HCMD_BLOCK_SIZE      	256
+
+struct msg_hdr {
+	u8 type;
+	u8 category;
+	__le16 opcode;
+	u8 seqnum;
+	u8 flags;
+	__le16 length;
+} __attribute__((__packed__));
+
+struct log_hdr {
+	__le32 timestamp;
+	u8 severity;
+	u8 logsource;
+	__le16 reserved;
+} __attribute__((__packed__));
+
+struct mdump_hdr {
+	u8 dmpid;
+	u8 frag;
+	__le16 size;
+	__le32 addr;
+} __attribute__((__packed__));
+
+struct top_msg {
+	struct msg_hdr hdr;
+	union {
+		/* D2H messages */
+		struct {
+			struct log_hdr log_hdr;
+			u8 data[1];
+		} __attribute__((__packed__)) log;
+
+		struct {
+			struct log_hdr log_hdr;
+			struct mdump_hdr md_hdr;
+			u8 data[1];
+		} __attribute__((__packed__)) mdump;
+
+		/* H2D messages */
+		struct {
+			u8 logsource;
+			u8 sevmask;
+		} __attribute__((__packed__)) logdefs[FW_LOG_SRC_MAX];
+		struct mdump_hdr mdump_req;
+	} u;
+} __attribute__((__packed__));
+
+
+#endif /* __FWMSG_H__ */
diff --git a/drivers/misc/iwmc3200top/iwmc3200top.h b/drivers/misc/iwmc3200top/iwmc3200top.h
new file mode 100644
index 0000000..f572fcf
--- /dev/null
+++ b/drivers/misc/iwmc3200top/iwmc3200top.h
@@ -0,0 +1,206 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/iwmc3200top.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __IWMC3200TOP_H__
+#define __IWMC3200TOP_H__
+
+#include <linux/workqueue.h>
+
+#define DRV_NAME "iwmc3200top"
+
+#define IWMC_SDIO_BLK_SIZE			256
+#define IWMC_DEFAULT_TR_BLK			64
+#define IWMC_SDIO_DATA_ADDR			0x0
+#define IWMC_SDIO_INTR_ENABLE_ADDR		0x14
+#define IWMC_SDIO_INTR_STATUS_ADDR		0x13
+#define IWMC_SDIO_INTR_CLEAR_ADDR		0x13
+#define IWMC_SDIO_INTR_GET_SIZE_ADDR		0x2C
+
+#define COMM_HUB_HEADER_LENGTH 16
+#define LOGGER_HEADER_LENGTH   10
+
+
+#define BARKER_DNLOAD_BT_POS		0
+#define BARKER_DNLOAD_BT_MSK		BIT(BARKER_DNLOAD_BT_POS)
+#define BARKER_DNLOAD_GPS_POS		1
+#define BARKER_DNLOAD_GPS_MSK		BIT(BARKER_DNLOAD_GPS_POS)
+#define BARKER_DNLOAD_TOP_POS		2
+#define BARKER_DNLOAD_TOP_MSK		BIT(BARKER_DNLOAD_TOP_POS)
+#define BARKER_DNLOAD_RESERVED1_POS	3
+#define BARKER_DNLOAD_RESERVED1_MSK	BIT(BARKER_DNLOAD_RESERVED1_POS)
+#define BARKER_DNLOAD_JUMP_POS		4
+#define BARKER_DNLOAD_JUMP_MSK		BIT(BARKER_DNLOAD_JUMP_POS)
+#define BARKER_DNLOAD_SYNC_POS		5
+#define BARKER_DNLOAD_SYNC_MSK		BIT(BARKER_DNLOAD_SYNC_POS)
+#define BARKER_DNLOAD_RESERVED2_POS	6
+#define BARKER_DNLOAD_RESERVED2_MSK	(0x3 << BARKER_DNLOAD_RESERVED2_POS)
+#define BARKER_DNLOAD_BARKER_POS	8
+#define BARKER_DNLOAD_BARKER_MSK	(0xffffff << BARKER_DNLOAD_BARKER_POS)
+
+#define IWMC_BARKER_REBOOT 	(0xdeadbe << BARKER_DNLOAD_BARKER_POS)
+/* whole field barker */
+#define IWMC_BARKER_ACK 	0xfeedbabe
+
+#define IWMC_CMD_SIGNATURE 	0xcbbc
+
+#define CMD_HDR_OPCODE_POS		0
+#define CMD_HDR_OPCODE_MSK_MSK		(0xf << CMD_HDR_OPCODE_MSK_POS)
+#define CMD_HDR_RESPONSE_CODE_POS	4
+#define CMD_HDR_RESPONSE_CODE_MSK	(0xf << CMD_HDR_RESPONSE_CODE_POS)
+#define CMD_HDR_USE_CHECKSUM_POS	8
+#define CMD_HDR_USE_CHECKSUM_MSK	BIT(CMD_HDR_USE_CHECKSUM_POS)
+#define CMD_HDR_RESPONSE_REQUIRED_POS	9
+#define CMD_HDR_RESPONSE_REQUIRED_MSK	BIT(CMD_HDR_RESPONSE_REQUIRED_POS)
+#define CMD_HDR_DIRECT_ACCESS_POS	10
+#define CMD_HDR_DIRECT_ACCESS_MSK	BIT(CMD_HDR_DIRECT_ACCESS_POS)
+#define CMD_HDR_RESERVED_POS		11
+#define CMD_HDR_RESERVED_MSK		BIT(0x1f << CMD_HDR_RESERVED_POS)
+#define CMD_HDR_SIGNATURE_POS		16
+#define CMD_HDR_SIGNATURE_MSK		BIT(0xffff << CMD_HDR_SIGNATURE_POS)
+
+enum {
+	IWMC_OPCODE_PING = 0,
+	IWMC_OPCODE_READ = 1,
+	IWMC_OPCODE_WRITE = 2,
+	IWMC_OPCODE_JUMP = 3,
+	IWMC_OPCODE_REBOOT = 4,
+	IWMC_OPCODE_PERSISTENT_WRITE = 5,
+	IWMC_OPCODE_PERSISTENT_READ = 6,
+	IWMC_OPCODE_READ_MODIFY_WRITE = 7,
+	IWMC_OPCODE_LAST_COMMAND = 15
+};
+
+struct iwmct_fw_load_hdr {
+	__le32 cmd;
+	__le32 target_addr;
+	__le32 data_size;
+	__le32 block_chksm;
+	u8 data[0];
+};
+
+/**
+ * struct iwmct_fw_hdr
+ * holds all sw components versions
+ */
+struct iwmct_fw_hdr {
+	u8 top_major;
+	u8 top_minor;
+	u8 top_revision;
+	u8 gps_major;
+	u8 gps_minor;
+	u8 gps_revision;
+	u8 bt_major;
+	u8 bt_minor;
+	u8 bt_revision;
+	u8 tic_name[31];
+};
+
+/**
+ * struct iwmct_fw_sec_hdr
+ * @type: function type
+ * @data_size: section's data size
+ * @target_addr: download address
+ */
+struct iwmct_fw_sec_hdr {
+	u8 type[4];
+	__le32 data_size;
+	__le32 target_addr;
+};
+
+/**
+ * struct iwmct_parser
+ * @file: fw image
+ * @file_size: fw size
+ * @cur_pos: position in file
+ * @buf: temp buf for download
+ * @buf_size: size of buf
+ * @entry_point: address to jump in fw kick-off
+ */
+struct iwmct_parser {
+	const u8 *file;
+	size_t file_size;
+	size_t cur_pos;
+	u8 *buf;
+	size_t buf_size;
+	u32 entry_point;
+	struct iwmct_fw_hdr versions;
+};
+
+
+struct iwmct_work_struct {
+	struct list_head list;
+	ssize_t iosize;
+};
+
+struct iwmct_dbg {
+	int blocks;
+	bool dump;
+	bool jump;
+	bool direct;
+	bool checksum;
+	bool fw_download;
+	int block_size;
+	int download_trans_blks;
+
+	char label_fw[256];
+};
+
+struct iwmct_debugfs;
+
+struct iwmct_priv {
+	struct sdio_func *func;
+	struct iwmct_debugfs *dbgfs;
+	struct iwmct_parser parser;
+	atomic_t reset;
+	atomic_t dev_sync;
+	u32 trans_len;
+	u32 barker;
+	struct iwmct_dbg dbg;
+
+	/* drivers work queue */
+	struct workqueue_struct *wq;
+	struct workqueue_struct *bus_rescan_wq;
+	struct work_struct bus_rescan_worker;
+	struct work_struct isr_worker;
+
+	/* drivers wait queue */
+	wait_queue_head_t wait_q;
+
+	/* rx request list */
+	struct list_head read_req_list;
+};
+
+extern int iwmct_tx(struct iwmct_priv *priv, unsigned int addr,
+		void *src, int count);
+
+extern int iwmct_fw_load(struct iwmct_priv *priv);
+
+extern void iwmct_dbg_init_params(struct iwmct_priv *drv);
+extern void iwmct_dbg_init_drv_attrs(struct device_driver *drv);
+extern void iwmct_dbg_remove_drv_attrs(struct device_driver *drv);
+extern int iwmct_send_hcmd(struct iwmct_priv *priv, u8 *cmd, u16 len);
+
+#endif  /*  __IWMC3200TOP_H__  */
diff --git a/drivers/misc/iwmc3200top/log.c b/drivers/misc/iwmc3200top/log.c
new file mode 100644
index 0000000..d569279
--- /dev/null
+++ b/drivers/misc/iwmc3200top/log.c
@@ -0,0 +1,347 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/log.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/ctype.h>
+#include "fw-msg.h"
+#include "iwmc3200top.h"
+#include "log.h"
+
+/* Maximal hexadecimal string size of the FW memdump message */
+#define LOG_MSG_SIZE_MAX		12400
+
+/* iwmct_logdefs is a global used by log macros */
+u8 iwmct_logdefs[LOG_SRC_MAX];
+static u8 iwmct_fw_logdefs[FW_LOG_SRC_MAX];
+
+
+static int _log_set_log_filter(u8 *logdefs, int size, u8 src, u8 logmask)
+{
+	int i;
+
+	if (src < size)
+		logdefs[src] = logmask;
+	else if (src == LOG_SRC_ALL)
+		for (i = 0; i < size; i++)
+			logdefs[i] = logmask;
+	else
+		return -1;
+
+	return 0;
+}
+
+
+int iwmct_log_set_filter(u8 src, u8 logmask)
+{
+	return _log_set_log_filter(iwmct_logdefs, LOG_SRC_MAX, src, logmask);
+}
+
+
+int iwmct_log_set_fw_filter(u8 src, u8 logmask)
+{
+	return _log_set_log_filter(iwmct_fw_logdefs,
+				   FW_LOG_SRC_MAX, src, logmask);
+}
+
+
+static int log_msg_format_hex(char *str, int slen, u8 *ibuf,
+			      int ilen, char *pref)
+{
+	int pos = 0;
+	int i;
+	int len;
+
+	for (pos = 0, i = 0; pos < slen - 2 && pref[i] != '\0'; i++, pos++)
+		str[pos] = pref[i];
+
+	for (i = 0; pos < slen - 2 && i < ilen; pos += len, i++)
+		len = snprintf(&str[pos], slen - pos - 1, " %2.2X", ibuf[i]);
+
+	if (i < ilen)
+		return -1;
+
+	return 0;
+}
+
+/*	NOTE: This function is not thread safe.
+	Currently it's called only from sdio rx worker - no race there
+*/
+void iwmct_log_top_message(struct iwmct_priv *priv, u8 *buf, int len)
+{
+	struct top_msg *msg;
+	static char logbuf[LOG_MSG_SIZE_MAX];
+
+	msg = (struct top_msg *)buf;
+
+	if (len < sizeof(msg->hdr) + sizeof(msg->u.log.log_hdr)) {
+		LOG_ERROR(priv, FW_MSG, "Log message from TOP "
+			  "is too short %d (expected %zd)\n",
+			  len, sizeof(msg->hdr) + sizeof(msg->u.log.log_hdr));
+		return;
+	}
+
+	if (!(iwmct_fw_logdefs[msg->u.log.log_hdr.logsource] &
+		BIT(msg->u.log.log_hdr.severity)) ||
+	    !(iwmct_logdefs[LOG_SRC_FW_MSG] & BIT(msg->u.log.log_hdr.severity)))
+		return;
+
+	switch (msg->hdr.category) {
+	case COMM_CATEGORY_TESTABILITY:
+		if (!(iwmct_logdefs[LOG_SRC_TST] &
+		      BIT(msg->u.log.log_hdr.severity)))
+			return;
+		if (log_msg_format_hex(logbuf, LOG_MSG_SIZE_MAX, buf,
+				       le16_to_cpu(msg->hdr.length) +
+				       sizeof(msg->hdr), "<TST>"))
+			LOG_WARNING(priv, TST,
+				  "TOP TST message is too long, truncating...");
+		LOG_WARNING(priv, TST, "%s\n", logbuf);
+		break;
+	case COMM_CATEGORY_DEBUG:
+		if (msg->hdr.opcode == OP_DBG_ZSTR_MSG)
+			LOG_INFO(priv, FW_MSG, "%s %s", "<DBG>",
+				       ((u8 *)msg) + sizeof(msg->hdr)
+					+ sizeof(msg->u.log.log_hdr));
+		else {
+			if (log_msg_format_hex(logbuf, LOG_MSG_SIZE_MAX, buf,
+					le16_to_cpu(msg->hdr.length)
+						+ sizeof(msg->hdr),
+					"<DBG>"))
+				LOG_WARNING(priv, FW_MSG,
+					"TOP DBG message is too long,"
+					"truncating...");
+			LOG_WARNING(priv, FW_MSG, "%s\n", logbuf);
+		}
+		break;
+	default:
+		break;
+	}
+}
+
+static int _log_get_filter_str(u8 *logdefs, int logdefsz, char *buf, int size)
+{
+	int i, pos, len;
+	for (i = 0, pos = 0; (pos < size-1) && (i < logdefsz); i++) {
+		len = snprintf(&buf[pos], size - pos - 1, "0x%02X%02X,",
+				i, logdefs[i]);
+		pos += len;
+	}
+	buf[pos-1] = '\n';
+	buf[pos] = '\0';
+
+	if (i < logdefsz)
+		return -1;
+	return 0;
+}
+
+int log_get_filter_str(char *buf, int size)
+{
+	return _log_get_filter_str(iwmct_logdefs, LOG_SRC_MAX, buf, size);
+}
+
+int log_get_fw_filter_str(char *buf, int size)
+{
+	return _log_get_filter_str(iwmct_fw_logdefs, FW_LOG_SRC_MAX, buf, size);
+}
+
+#define HEXADECIMAL_RADIX	16
+#define LOG_SRC_FORMAT		7 /* log level is in format of "0xXXXX," */
+
+ssize_t show_iwmct_log_level(struct device *d,
+				struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *str_buf;
+	int buf_size;
+	ssize_t ret;
+
+	buf_size = (LOG_SRC_FORMAT * LOG_SRC_MAX) + 1;
+	str_buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %d bytes\n", buf_size);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	if (log_get_filter_str(str_buf, buf_size) < 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = sprintf(buf, "%s", str_buf);
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t store_iwmct_log_level(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *token, *str_buf = NULL;
+	long val;
+	ssize_t ret = count;
+	u8 src, mask;
+
+	if (!count)
+		goto exit;
+
+	str_buf = kzalloc(count, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %zd bytes\n", count);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	memcpy(str_buf, buf, count);
+
+	while ((token = strsep(&str_buf, ",")) != NULL) {
+		while (isspace(*token))
+			++token;
+		if (strict_strtol(token, HEXADECIMAL_RADIX, &val)) {
+			LOG_ERROR(priv, DEBUGFS,
+				  "failed to convert string to long %s\n",
+				  token);
+			ret = -EINVAL;
+			goto exit;
+		}
+
+		mask  = val & 0xFF;
+		src = (val & 0XFF00) >> 8;
+		iwmct_log_set_filter(src, mask);
+	}
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t show_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	char *str_buf;
+	int buf_size;
+	ssize_t ret;
+
+	buf_size = (LOG_SRC_FORMAT * FW_LOG_SRC_MAX) + 2;
+
+	str_buf = kzalloc(buf_size, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %d bytes\n", buf_size);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	if (log_get_fw_filter_str(str_buf, buf_size) < 0) {
+		ret = -EINVAL;
+		goto exit;
+	}
+
+	ret = sprintf(buf, "%s", str_buf);
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
+ssize_t store_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	struct top_msg cmd;
+	char *token, *str_buf = NULL;
+	ssize_t ret = count;
+	u16 cmdlen = 0;
+	int i;
+	long val;
+	u8 src, mask;
+
+	if (!count)
+		goto exit;
+
+	str_buf = kzalloc(count, GFP_KERNEL);
+	if (!str_buf) {
+		LOG_ERROR(priv, DEBUGFS,
+			"failed to allocate %zd bytes\n", count);
+		ret = -ENOMEM;
+		goto exit;
+	}
+
+	memcpy(str_buf, buf, count);
+
+	cmd.hdr.type = COMM_TYPE_H2D;
+	cmd.hdr.category = COMM_CATEGORY_DEBUG;
+	cmd.hdr.opcode = CMD_DBG_LOG_LEVEL;
+
+	for (i = 0; ((token = strsep(&str_buf, ",")) != NULL) &&
+		     (i < FW_LOG_SRC_MAX); i++) {
+
+		while (isspace(*token))
+			++token;
+
+		if (strict_strtol(token, HEXADECIMAL_RADIX, &val)) {
+			LOG_ERROR(priv, DEBUGFS,
+				  "failed to convert string to long %s\n",
+				  token);
+			ret = -EINVAL;
+			goto exit;
+		}
+
+		mask  = val & 0xFF; /* LSB */
+		src = (val & 0XFF00) >> 8; /* 2nd least significant byte. */
+		iwmct_log_set_fw_filter(src, mask);
+
+		cmd.u.logdefs[i].logsource = src;
+		cmd.u.logdefs[i].sevmask = mask;
+	}
+
+	cmd.hdr.length = cpu_to_le16(i * sizeof(cmd.u.logdefs[0]));
+	cmdlen = (i * sizeof(cmd.u.logdefs[0]) + sizeof(cmd.hdr));
+
+	ret = iwmct_send_hcmd(priv, (u8 *)&cmd, cmdlen);
+	if (ret) {
+		LOG_ERROR(priv, DEBUGFS,
+			  "Failed to send %d bytes of fwcmd, ret=%zd\n",
+			  cmdlen, ret);
+		goto exit;
+	} else
+		LOG_INFO(priv, DEBUGFS, "fwcmd sent (%d bytes)\n", cmdlen);
+
+	ret = count;
+
+exit:
+	kfree(str_buf);
+	return ret;
+}
+
diff --git a/drivers/misc/iwmc3200top/log.h b/drivers/misc/iwmc3200top/log.h
new file mode 100644
index 0000000..aba8121
--- /dev/null
+++ b/drivers/misc/iwmc3200top/log.h
@@ -0,0 +1,158 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/log.h
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#ifndef __LOG_H__
+#define __LOG_H__
+
+
+/* log severity:
+ * The log levels here match FW log levels
+ * so values need to stay as is */
+#define LOG_SEV_CRITICAL		0
+#define LOG_SEV_ERROR			1
+#define LOG_SEV_WARNING			2
+#define LOG_SEV_INFO			3
+#define LOG_SEV_INFOEX			4
+
+#define LOG_SEV_FILTER_ALL		\
+	(BIT(LOG_SEV_CRITICAL) |	\
+	 BIT(LOG_SEV_ERROR)    |	\
+	 BIT(LOG_SEV_WARNING)  | 	\
+	 BIT(LOG_SEV_INFO)     |	\
+	 BIT(LOG_SEV_INFOEX))
+
+/* log source */
+#define LOG_SRC_INIT			0
+#define LOG_SRC_DEBUGFS			1
+#define LOG_SRC_FW_DOWNLOAD		2
+#define LOG_SRC_FW_MSG			3
+#define LOG_SRC_TST			4
+#define LOG_SRC_IRQ			5
+
+#define	LOG_SRC_MAX			6
+#define	LOG_SRC_ALL			0xFF
+
+/**
+ * Default intitialization runtime log level
+ */
+#ifndef LOG_SEV_FILTER_RUNTIME
+#define LOG_SEV_FILTER_RUNTIME			\
+	(BIT(LOG_SEV_CRITICAL)	|		\
+	 BIT(LOG_SEV_ERROR)	|		\
+	 BIT(LOG_SEV_WARNING))
+#endif
+
+#ifndef FW_LOG_SEV_FILTER_RUNTIME
+#define FW_LOG_SEV_FILTER_RUNTIME	LOG_SEV_FILTER_ALL
+#endif
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+/**
+ * Log macros
+ */
+
+#define priv2dev(priv) (&(priv->func)->dev)
+
+#define LOG_CRITICAL(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_CRITICAL))	\
+		dev_crit(priv2dev(priv), "%s %d: " fmt,			\
+			__func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_ERROR(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_ERROR))	\
+		dev_err(priv2dev(priv), "%s %d: " fmt,			\
+			__func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_WARNING(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_WARNING))	\
+		dev_warn(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_INFO(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFO))		\
+		dev_info(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_INFOEX(priv, src, fmt, args...)				\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFOEX))	\
+		dev_dbg(priv2dev(priv), "%s %d: " fmt,			\
+			 __func__, __LINE__, ##args);			\
+} while (0)
+
+#define LOG_HEXDUMP(src, ptr, len)					\
+do {									\
+	if (iwmct_logdefs[LOG_SRC_ ## src] & BIT(LOG_SEV_INFOEX))	\
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_NONE,	\
+				16, 1, ptr, len, false);		\
+} while (0)
+
+void iwmct_log_top_message(struct iwmct_priv *priv, u8 *buf, int len);
+
+extern u8 iwmct_logdefs[];
+
+int iwmct_log_set_filter(u8 src, u8 logmask);
+int iwmct_log_set_fw_filter(u8 src, u8 logmask);
+
+ssize_t show_iwmct_log_level(struct device *d,
+			struct device_attribute *attr, char *buf);
+ssize_t store_iwmct_log_level(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count);
+ssize_t show_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr, char *buf);
+ssize_t store_iwmct_log_level_fw(struct device *d,
+			struct device_attribute *attr,
+			const char *buf, size_t count);
+
+#else
+
+#define LOG_CRITICAL(priv, src, fmt, args...)
+#define LOG_ERROR(priv, src, fmt, args...)
+#define LOG_WARNING(priv, src, fmt, args...)
+#define LOG_INFO(priv, src, fmt, args...)
+#define LOG_INFOEX(priv, src, fmt, args...)
+#define LOG_HEXDUMP(src, ptr, len)
+
+static inline void iwmct_log_top_message(struct iwmct_priv *priv,
+					 u8 *buf, int len) {}
+static inline int iwmct_log_set_filter(u8 src, u8 logmask) { return 0; }
+static inline int iwmct_log_set_fw_filter(u8 src, u8 logmask) { return 0; }
+
+#endif /* CONFIG_IWMC3200TOP_DEBUG */
+
+int log_get_filter_str(char *buf, int size);
+int log_get_fw_filter_str(char *buf, int size);
+
+#endif /* __LOG_H__ */
diff --git a/drivers/misc/iwmc3200top/main.c b/drivers/misc/iwmc3200top/main.c
new file mode 100644
index 0000000..6e4e491
--- /dev/null
+++ b/drivers/misc/iwmc3200top/main.c
@@ -0,0 +1,699 @@
+/*
+ * iwmc3200top - Intel Wireless MultiCom 3200 Top Driver
+ * drivers/misc/iwmc3200top/main.c
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ *
+ * Author Name: Maxim Grabarnik <maxim.grabarnink@intel.com>
+ *  -
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/debugfs.h>
+#include <linux/mmc/sdio_ids.h>
+#include <linux/mmc/sdio_func.h>
+#include <linux/mmc/sdio.h>
+
+#include "iwmc3200top.h"
+#include "log.h"
+#include "fw-msg.h"
+#include "debugfs.h"
+
+
+#define DRIVER_DESCRIPTION "Intel(R) IWMC 3200 Top Driver"
+#define DRIVER_COPYRIGHT "Copyright (c) 2008 Intel Corporation."
+
+#define IWMCT_VERSION "0.1.62"
+
+#ifdef REPOSITORY_LABEL
+#define RL REPOSITORY_LABEL
+#else
+#define RL local
+#endif
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+#define VD "-d"
+#else
+#define VD
+#endif
+
+#define DRIVER_VERSION IWMCT_VERSION "-"  __stringify(RL) VD
+
+MODULE_DESCRIPTION(DRIVER_DESCRIPTION);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRIVER_COPYRIGHT);
+
+
+/* FIXME: These can be found in sdio_ids.h in newer kernels */
+#ifndef SDIO_INTEL_VENDOR_ID
+#define SDIO_INTEL_VENDOR_ID			0x0089
+#endif
+#ifndef SDIO_DEVICE_ID_INTEL_IWMC3200TOP
+#define SDIO_DEVICE_ID_INTEL_IWMC3200TOP	0x1404
+#endif
+
+/*
+ * This workers main task is to wait for OP_OPR_ALIVE
+ * from TOP FW until ALIVE_MSG_TIMOUT timeout is elapsed.
+ * When OP_OPR_ALIVE received it will issue
+ * a call to "bus_rescan_devices".
+ */
+static void iwmct_rescan_worker(struct work_struct *ws)
+{
+	struct iwmct_priv *priv;
+	int ret;
+
+	priv = container_of(ws, struct iwmct_priv, bus_rescan_worker);
+
+	LOG_INFO(priv, FW_MSG, "Calling bus_rescan\n");
+
+	ret = bus_rescan_devices(priv->func->dev.bus);
+	if (ret < 0)
+		LOG_INFO(priv, FW_DOWNLOAD, "bus_rescan_devices FAILED!!!\n");
+}
+
+static void op_top_message(struct iwmct_priv *priv, struct top_msg *msg)
+{
+	switch (msg->hdr.opcode) {
+	case OP_OPR_ALIVE:
+		LOG_INFO(priv, FW_MSG, "Got ALIVE from device, wake rescan\n");
+		queue_work(priv->bus_rescan_wq, &priv->bus_rescan_worker);
+		break;
+	default:
+		LOG_INFO(priv, FW_MSG, "Received msg opcode 0x%X\n",
+			msg->hdr.opcode);
+		break;
+	}
+}
+
+
+static void handle_top_message(struct iwmct_priv *priv, u8 *buf, int len)
+{
+	struct top_msg *msg;
+
+	msg = (struct top_msg *)buf;
+
+	if (msg->hdr.type != COMM_TYPE_D2H) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP with invalid message type 0x%X\n",
+			msg->hdr.type);
+		return;
+	}
+
+	if (len < sizeof(msg->hdr)) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP is too short for message header "
+			"received %d bytes, expected at least %zd bytes\n",
+			len, sizeof(msg->hdr));
+		return;
+	}
+
+	if (len < le16_to_cpu(msg->hdr.length) + sizeof(msg->hdr)) {
+		LOG_ERROR(priv, FW_MSG,
+			"Message length (%d bytes) is shorter than "
+			"in header (%d bytes)\n",
+			len, le16_to_cpu(msg->hdr.length));
+		return;
+	}
+
+	switch (msg->hdr.category) {
+	case COMM_CATEGORY_OPERATIONAL:
+		op_top_message(priv, (struct top_msg *)buf);
+		break;
+
+	case COMM_CATEGORY_DEBUG:
+	case COMM_CATEGORY_TESTABILITY:
+	case COMM_CATEGORY_DIAGNOSTICS:
+		iwmct_log_top_message(priv, buf, len);
+		break;
+
+	default:
+		LOG_ERROR(priv, FW_MSG,
+			"Message from TOP with unknown category 0x%X\n",
+			msg->hdr.category);
+		break;
+	}
+}
+
+int iwmct_send_hcmd(struct iwmct_priv *priv, u8 *cmd, u16 len)
+{
+	int ret;
+	u8 *buf;
+
+	LOG_INFOEX(priv, FW_MSG, "Sending hcmd:\n");
+
+	/* add padding to 256 for IWMC */
+	((struct top_msg *)cmd)->hdr.flags |= CMD_FLAG_PADDING_256;
+
+	LOG_HEXDUMP(FW_MSG, cmd, len);
+
+	if (len > FW_HCMD_BLOCK_SIZE) {
+		LOG_ERROR(priv, FW_MSG, "size %d exceeded hcmd max size %d\n",
+			  len, FW_HCMD_BLOCK_SIZE);
+		return -1;
+	}
+
+	buf = kzalloc(FW_HCMD_BLOCK_SIZE, GFP_KERNEL);
+	if (!buf) {
+		LOG_ERROR(priv, FW_MSG, "kzalloc error, buf size %d\n",
+			  FW_HCMD_BLOCK_SIZE);
+		return -1;
+	}
+
+	memcpy(buf, cmd, len);
+
+	sdio_claim_host(priv->func);
+	ret = sdio_memcpy_toio(priv->func, IWMC_SDIO_DATA_ADDR, buf,
+			       FW_HCMD_BLOCK_SIZE);
+	sdio_release_host(priv->func);
+
+	kfree(buf);
+	return ret;
+}
+
+int iwmct_tx(struct iwmct_priv *priv, unsigned int addr,
+	void *src, int count)
+{
+	int ret;
+
+	sdio_claim_host(priv->func);
+	ret = sdio_memcpy_toio(priv->func, addr, src, count);
+	sdio_release_host(priv->func);
+
+	return ret;
+}
+
+static void iwmct_irq_read_worker(struct work_struct *ws)
+{
+	struct iwmct_priv *priv;
+	struct iwmct_work_struct *read_req;
+	__le32 *buf = NULL;
+	int ret;
+	int iosize;
+	u32 barker;
+	bool is_barker;
+
+	priv = container_of(ws, struct iwmct_priv, isr_worker);
+
+	LOG_INFO(priv, IRQ, "enter iwmct_irq_read_worker %p\n", ws);
+
+	/* --------------------- Handshake with device -------------------- */
+	sdio_claim_host(priv->func);
+
+	/* all list manipulations have to be protected by
+	 * sdio_claim_host/sdio_release_host */
+	if (list_empty(&priv->read_req_list)) {
+		LOG_ERROR(priv, IRQ, "read_req_list empty in read worker\n");
+		goto exit_release;
+	}
+
+	read_req = list_entry(priv->read_req_list.next,
+			      struct iwmct_work_struct, list);
+
+	list_del(&read_req->list);
+	iosize = read_req->iosize;
+	kfree(read_req);
+
+	buf = kzalloc(iosize, GFP_KERNEL);
+	if (!buf) {
+		LOG_ERROR(priv, IRQ, "kzalloc error, buf size %d\n", iosize);
+		goto exit_release;
+	}
+
+	LOG_INFO(priv, IRQ, "iosize=%d, buf=%p, func=%d\n",
+				iosize, buf, priv->func->num);
+
+	/* read from device */
+	ret = sdio_memcpy_fromio(priv->func, buf, IWMC_SDIO_DATA_ADDR, iosize);
+	if (ret) {
+		LOG_ERROR(priv, IRQ, "error %d reading buffer\n", ret);
+		goto exit_release;
+	}
+
+	LOG_HEXDUMP(IRQ, (u8 *)buf, iosize);
+
+	barker = le32_to_cpu(buf[0]);
+
+	/* Verify whether it's a barker and if not - treat as regular Rx */
+	if (barker == IWMC_BARKER_ACK ||
+	    (barker & BARKER_DNLOAD_BARKER_MSK) == IWMC_BARKER_REBOOT) {
+
+		/* Valid Barker is equal on first 4 dwords */
+		is_barker = (buf[1] == buf[0]) &&
+			    (buf[2] == buf[0]) &&
+			    (buf[3] == buf[0]);
+
+		if (!is_barker) {
+			LOG_WARNING(priv, IRQ,
+				"Potentially inconsistent barker "
+				"%08X_%08X_%08X_%08X\n",
+				le32_to_cpu(buf[0]), le32_to_cpu(buf[1]),
+				le32_to_cpu(buf[2]), le32_to_cpu(buf[3]));
+		}
+	} else {
+		is_barker = false;
+	}
+
+	/* Handle Top CommHub message */
+	if (!is_barker) {
+		sdio_release_host(priv->func);
+		handle_top_message(priv, (u8 *)buf, iosize);
+		goto exit;
+	} else if (barker == IWMC_BARKER_ACK) { /* Handle barkers */
+		if (atomic_read(&priv->dev_sync) == 0) {
+			LOG_ERROR(priv, IRQ,
+				  "ACK barker arrived out-of-sync\n");
+			goto exit_release;
+		}
+
+		/* Continuing to FW download (after Sync is completed)*/
+		atomic_set(&priv->dev_sync, 0);
+		LOG_INFO(priv, IRQ, "ACK barker arrived "
+				"- starting FW download\n");
+	} else { /* REBOOT barker */
+		LOG_INFO(priv, IRQ, "Recieved reboot barker: %x\n", barker);
+		priv->barker = barker;
+
+		if (barker & BARKER_DNLOAD_SYNC_MSK) {
+			/* Send the same barker back */
+			ret = sdio_memcpy_toio(priv->func, IWMC_SDIO_DATA_ADDR,
+					       buf, iosize);
+			if (ret) {
+				LOG_ERROR(priv, IRQ,
+					 "error %d echoing barker\n", ret);
+				goto exit_release;
+			}
+			LOG_INFO(priv, IRQ, "Echoing barker to device\n");
+			atomic_set(&priv->dev_sync, 1);
+			goto exit_release;
+		}
+
+		/* Continuing to FW download (without Sync) */
+		LOG_INFO(priv, IRQ, "No sync requested "
+				    "- starting FW download\n");
+	}
+
+	sdio_release_host(priv->func);
+
+
+	LOG_INFO(priv, IRQ, "barker download request 0x%x is:\n", priv->barker);
+	LOG_INFO(priv, IRQ, "*******  Top FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_TOP_MSK) ? "was" : "not");
+	LOG_INFO(priv, IRQ, "*******  GPS FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_GPS_MSK) ? "was" : "not");
+	LOG_INFO(priv, IRQ, "*******  BT FW %s requested ********\n",
+			(priv->barker & BARKER_DNLOAD_BT_MSK) ? "was" : "not");
+
+	if (priv->dbg.fw_download)
+		iwmct_fw_load(priv);
+	else
+		LOG_ERROR(priv, IRQ, "FW download not allowed\n");
+
+	goto exit;
+
+exit_release:
+	sdio_release_host(priv->func);
+exit:
+	kfree(buf);
+	LOG_INFO(priv, IRQ, "exit iwmct_irq_read_worker\n");
+}
+
+static void iwmct_irq(struct sdio_func *func)
+{
+	struct iwmct_priv *priv;
+	int val, ret;
+	int iosize;
+	int addr = IWMC_SDIO_INTR_GET_SIZE_ADDR;
+	struct iwmct_work_struct *read_req;
+
+	priv = sdio_get_drvdata(func);
+
+	LOG_INFO(priv, IRQ, "enter iwmct_irq\n");
+
+	/* read the function's status register */
+	val = sdio_readb(func, IWMC_SDIO_INTR_STATUS_ADDR, &ret);
+
+	LOG_INFO(priv, IRQ, "iir value = %d, ret=%d\n", val, ret);
+
+	if (!val) {
+		LOG_ERROR(priv, IRQ, "iir = 0, exiting ISR\n");
+		goto exit_clear_intr;
+	}
+
+
+	/*
+	 * read 2 bytes of the transaction size
+	 * IMPORTANT: sdio transaction size has to be read before clearing
+	 * sdio interrupt!!!
+	 */
+	val = sdio_readb(priv->func, addr++, &ret);
+	iosize = val;
+	val = sdio_readb(priv->func, addr++, &ret);
+	iosize += val << 8;
+
+	LOG_INFO(priv, IRQ, "READ size %d\n", iosize);
+
+	if (iosize == 0) {
+		LOG_ERROR(priv, IRQ, "READ size %d, exiting ISR\n", iosize);
+		goto exit_clear_intr;
+	}
+
+	/* allocate a work structure to pass iosize to the worker */
+	read_req = kzalloc(sizeof(struct iwmct_work_struct), GFP_KERNEL);
+	if (!read_req) {
+		LOG_ERROR(priv, IRQ, "failed to allocate read_req, exit ISR\n");
+		goto exit_clear_intr;
+	}
+
+	INIT_LIST_HEAD(&read_req->list);
+	read_req->iosize = iosize;
+
+	list_add_tail(&priv->read_req_list, &read_req->list);
+
+	/* clear the function's interrupt request bit (write 1 to clear) */
+	sdio_writeb(func, 1, IWMC_SDIO_INTR_CLEAR_ADDR, &ret);
+
+	queue_work(priv->wq, &priv->isr_worker);
+
+	LOG_INFO(priv, IRQ, "exit iwmct_irq\n");
+
+	return;
+
+exit_clear_intr:
+	/* clear the function's interrupt request bit (write 1 to clear) */
+	sdio_writeb(func, 1, IWMC_SDIO_INTR_CLEAR_ADDR, &ret);
+}
+
+
+static int blocks;
+module_param(blocks, int, 0604);
+MODULE_PARM_DESC(blocks, "max_blocks_to_send");
+
+static int dump;
+module_param(dump, bool, 0604);
+MODULE_PARM_DESC(dump, "dump_hex_content");
+
+static int jump = 1;
+module_param(jump, bool, 0604);
+
+static int direct = 1;
+module_param(direct, bool, 0604);
+
+static int checksum = 1;
+module_param(checksum, bool, 0604);
+
+static int fw_download = 1;
+module_param(fw_download, bool, 0604);
+
+static int block_size = IWMC_SDIO_BLK_SIZE;
+module_param(block_size, int, 0404);
+
+static int download_trans_blks = IWMC_DEFAULT_TR_BLK;
+module_param(download_trans_blks, int, 0604);
+
+static int rubbish_barker;
+module_param(rubbish_barker, bool, 0604);
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+static int log_level[LOG_SRC_MAX];
+static unsigned int log_level_argc;
+module_param_array(log_level, int, &log_level_argc, 0604);
+MODULE_PARM_DESC(log_level, "log_level");
+
+static int log_level_fw[FW_LOG_SRC_MAX];
+static unsigned int log_level_fw_argc;
+module_param_array(log_level_fw, int, &log_level_fw_argc, 0604);
+MODULE_PARM_DESC(log_level_fw, "log_level_fw");
+#endif
+
+void iwmct_dbg_init_params(struct iwmct_priv *priv)
+{
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+	int i;
+
+	for (i = 0; i < log_level_argc; i++) {
+		dev_notice(&priv->func->dev, "log_level[%d]=0x%X\n",
+						i, log_level[i]);
+		iwmct_log_set_filter((log_level[i] >> 8) & 0xFF,
+			       log_level[i] & 0xFF);
+	}
+	for (i = 0; i < log_level_fw_argc; i++) {
+		dev_notice(&priv->func->dev, "log_level_fw[%d]=0x%X\n",
+						i, log_level_fw[i]);
+		iwmct_log_set_fw_filter((log_level_fw[i] >> 8) & 0xFF,
+				  log_level_fw[i] & 0xFF);
+	}
+#endif
+
+	priv->dbg.blocks = blocks;
+	LOG_INFO(priv, INIT, "blocks=%d\n", blocks);
+	priv->dbg.dump = (bool)dump;
+	LOG_INFO(priv, INIT, "dump=%d\n", dump);
+	priv->dbg.jump = (bool)jump;
+	LOG_INFO(priv, INIT, "jump=%d\n", jump);
+	priv->dbg.direct = (bool)direct;
+	LOG_INFO(priv, INIT, "direct=%d\n", direct);
+	priv->dbg.checksum = (bool)checksum;
+	LOG_INFO(priv, INIT, "checksum=%d\n", checksum);
+	priv->dbg.fw_download = (bool)fw_download;
+	LOG_INFO(priv, INIT, "fw_download=%d\n", fw_download);
+	priv->dbg.block_size = block_size;
+	LOG_INFO(priv, INIT, "block_size=%d\n", block_size);
+	priv->dbg.download_trans_blks = download_trans_blks;
+	LOG_INFO(priv, INIT, "download_trans_blks=%d\n", download_trans_blks);
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+static ssize_t show_iwmct_fw_version(struct device *d,
+				  struct device_attribute *attr, char *buf)
+{
+	struct iwmct_priv *priv = dev_get_drvdata(d);
+	return sprintf(buf, "%s\n", priv->dbg.label_fw);
+}
+static DEVICE_ATTR(cc_label_fw, S_IRUGO, show_iwmct_fw_version, NULL);
+
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+static DEVICE_ATTR(log_level, S_IWUSR | S_IRUGO,
+		   show_iwmct_log_level, store_iwmct_log_level);
+static DEVICE_ATTR(log_level_fw, S_IWUSR | S_IRUGO,
+		   show_iwmct_log_level_fw, store_iwmct_log_level_fw);
+#endif
+
+static struct attribute *iwmct_sysfs_entries[] = {
+	&dev_attr_cc_label_fw.attr,
+#ifdef CONFIG_IWMC3200TOP_DEBUG
+	&dev_attr_log_level.attr,
+	&dev_attr_log_level_fw.attr,
+#endif
+	NULL
+};
+
+static struct attribute_group iwmct_attribute_group = {
+	.name = NULL,		/* put in device directory */
+	.attrs = iwmct_sysfs_entries,
+};
+
+
+static int iwmct_probe(struct sdio_func *func,
+			   const struct sdio_device_id *id)
+{
+	struct iwmct_priv *priv;
+	int ret;
+	int val = 1;
+	int addr = IWMC_SDIO_INTR_ENABLE_ADDR;
+
+	dev_dbg(&func->dev, "enter iwmct_probe\n");
+
+	dev_dbg(&func->dev, "IRQ polling period id %u msecs, HZ is %d\n",
+		jiffies_to_msecs(2147483647), HZ);
+
+	priv = kzalloc(sizeof(struct iwmct_priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&func->dev, "kzalloc error\n");
+		return -ENOMEM;
+	}
+	priv->func = func;
+	sdio_set_drvdata(func, priv);
+
+
+	/* create drivers work queue */
+	priv->wq = create_workqueue(DRV_NAME "_wq");
+	priv->bus_rescan_wq = create_workqueue(DRV_NAME "_rescan_wq");
+	INIT_WORK(&priv->bus_rescan_worker, iwmct_rescan_worker);
+	INIT_WORK(&priv->isr_worker, iwmct_irq_read_worker);
+
+	init_waitqueue_head(&priv->wait_q);
+
+	sdio_claim_host(func);
+	/* FIXME: Remove after it is fixed in the Boot ROM upgrade */
+	func->enable_timeout = 10;
+
+	/* In our HW, setting the block size also wakes up the boot rom. */
+	ret = sdio_set_block_size(func, priv->dbg.block_size);
+	if (ret) {
+		LOG_ERROR(priv, INIT,
+			"sdio_set_block_size() failure: %d\n", ret);
+		goto error_sdio_enable;
+	}
+
+	ret = sdio_enable_func(func);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "sdio_enable_func() failure: %d\n", ret);
+		goto error_sdio_enable;
+	}
+
+	/* init reset and dev_sync states */
+	atomic_set(&priv->reset, 0);
+	atomic_set(&priv->dev_sync, 0);
+
+	/* init read req queue */
+	INIT_LIST_HEAD(&priv->read_req_list);
+
+	/* process configurable parameters */
+	iwmct_dbg_init_params(priv);
+	ret = sysfs_create_group(&func->dev.kobj, &iwmct_attribute_group);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "Failed to register attributes and "
+			 "initialize module_params\n");
+		goto error_dev_attrs;
+	}
+
+	iwmct_dbgfs_register(priv, DRV_NAME);
+
+	if (!priv->dbg.direct && priv->dbg.download_trans_blks > 8) {
+		LOG_INFO(priv, INIT,
+			 "Reducing transaction to 8 blocks = 2K (from %d)\n",
+			 priv->dbg.download_trans_blks);
+		priv->dbg.download_trans_blks = 8;
+	}
+	priv->trans_len = priv->dbg.download_trans_blks * priv->dbg.block_size;
+	LOG_INFO(priv, INIT, "Transaction length = %d\n", priv->trans_len);
+
+	ret = sdio_claim_irq(func, iwmct_irq);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "sdio_claim_irq() failure: %d\n", ret);
+		goto error_claim_irq;
+	}
+
+
+	/* Enable function's interrupt */
+	sdio_writeb(priv->func, val, addr, &ret);
+	if (ret) {
+		LOG_ERROR(priv, INIT, "Failure writing to "
+			  "Interrupt Enable Register (%d): %d\n", addr, ret);
+		goto error_enable_int;
+	}
+
+	sdio_release_host(func);
+
+	LOG_INFO(priv, INIT, "exit iwmct_probe\n");
+
+	return ret;
+
+error_enable_int:
+	sdio_release_irq(func);
+error_claim_irq:
+	sdio_disable_func(func);
+error_dev_attrs:
+	iwmct_dbgfs_unregister(priv->dbgfs);
+	sysfs_remove_group(&func->dev.kobj, &iwmct_attribute_group);
+error_sdio_enable:
+	sdio_release_host(func);
+	return ret;
+}
+
+static void iwmct_remove(struct sdio_func *func)
+{
+	struct iwmct_work_struct *read_req;
+	struct iwmct_priv *priv = sdio_get_drvdata(func);
+
+	priv = sdio_get_drvdata(func);
+
+	LOG_INFO(priv, INIT, "enter\n");
+
+	sdio_claim_host(func);
+	sdio_release_irq(func);
+	sdio_release_host(func);
+
+	/* Safely destroy osc workqueue */
+	destroy_workqueue(priv->bus_rescan_wq);
+	destroy_workqueue(priv->wq);
+
+	sdio_claim_host(func);
+	sdio_disable_func(func);
+	sysfs_remove_group(&func->dev.kobj, &iwmct_attribute_group);
+	iwmct_dbgfs_unregister(priv->dbgfs);
+	sdio_release_host(func);
+
+	/* free read requests */
+	while (!list_empty(&priv->read_req_list)) {
+		read_req = list_entry(priv->read_req_list.next,
+			struct iwmct_work_struct, list);
+
+		list_del(&read_req->list);
+		kfree(read_req);
+	}
+
+	kfree(priv);
+}
+
+
+static const struct sdio_device_id iwmct_ids[] = {
+	{ SDIO_DEVICE(SDIO_INTEL_VENDOR_ID, SDIO_DEVICE_ID_INTEL_IWMC3200TOP)},
+	{ /* end: all zeroes */	},
+};
+
+MODULE_DEVICE_TABLE(sdio, iwmct_ids);
+
+static struct sdio_driver iwmct_driver = {
+	.probe		= iwmct_probe,
+	.remove		= iwmct_remove,
+	.name		= DRV_NAME,
+	.id_table	= iwmct_ids,
+};
+
+static int __init iwmct_init(void)
+{
+	int rc;
+
+	/* Default log filter settings */
+	iwmct_log_set_filter(LOG_SRC_ALL, LOG_SEV_FILTER_RUNTIME);
+	iwmct_log_set_filter(LOG_SRC_FW_MSG, LOG_SEV_FILTER_ALL);
+	iwmct_log_set_fw_filter(LOG_SRC_ALL, FW_LOG_SEV_FILTER_RUNTIME);
+
+	rc = sdio_register_driver(&iwmct_driver);
+
+	return rc;
+}
+
+static void __exit iwmct_exit(void)
+{
+	sdio_unregister_driver(&iwmct_driver);
+}
+
+module_init(iwmct_init);
+module_exit(iwmct_exit);
+
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index fa57b67..90a95ce 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -271,7 +271,7 @@
 	return mask;
 }
 
-static struct file_operations phantom_file_ops = {
+static const struct file_operations phantom_file_ops = {
 	.open = phantom_open,
 	.release = phantom_release,
 	.unlocked_ioctl = phantom_ioctl,
diff --git a/drivers/misc/sgi-gru/grufile.c b/drivers/misc/sgi-gru/grufile.c
index aed6098..41c8fe2 100644
--- a/drivers/misc/sgi-gru/grufile.c
+++ b/drivers/misc/sgi-gru/grufile.c
@@ -53,7 +53,6 @@
 /* Guaranteed user available resources on each node */
 static int max_user_cbrs, max_user_dsr_bytes;
 
-static struct file_operations gru_fops;
 static struct miscdevice gru_miscdev;
 
 
@@ -426,7 +425,7 @@
 	gru_proc_exit();
 }
 
-static struct file_operations gru_fops = {
+static const struct file_operations gru_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= gru_file_unlocked_ioctl,
 	.mmap		= gru_file_mmap,
@@ -438,7 +437,7 @@
 	.fops		= &gru_fops,
 };
 
-struct vm_operations_struct gru_vm_ops = {
+const struct vm_operations_struct gru_vm_ops = {
 	.close		= gru_vma_close,
 	.fault		= gru_fault,
 };
diff --git a/drivers/misc/sgi-gru/grutables.h b/drivers/misc/sgi-gru/grutables.h
index 34ab3d4..46990bc 100644
--- a/drivers/misc/sgi-gru/grutables.h
+++ b/drivers/misc/sgi-gru/grutables.h
@@ -624,7 +624,7 @@
  */
 struct gru_unload_context_req;
 
-extern struct vm_operations_struct gru_vm_ops;
+extern const struct vm_operations_struct gru_vm_ops;
 extern struct device *grudev;
 
 extern struct gru_vma_data *gru_alloc_vma_data(struct vm_area_struct *vma,
diff --git a/drivers/mmc/core/debugfs.c b/drivers/mmc/core/debugfs.c
index 610dbd1..96d10f4 100644
--- a/drivers/mmc/core/debugfs.c
+++ b/drivers/mmc/core/debugfs.c
@@ -240,7 +240,7 @@
 	return 0;
 }
 
-static struct file_operations mmc_dbg_ext_csd_fops = {
+static const struct file_operations mmc_dbg_ext_csd_fops = {
 	.open		= mmc_ext_csd_open,
 	.read		= mmc_ext_csd_read,
 	.release	= mmc_ext_csd_release,
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index 6636354..e1035c8 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -98,6 +98,22 @@
 static const unsigned int speed_unit[8] =
 	{ 10000, 100000, 1000000, 10000000, 0, 0, 0, 0 };
 
+/* FUNCE tuples with these types get passed to SDIO drivers */
+static const unsigned char funce_type_whitelist[] = {
+	4 /* CISTPL_FUNCE_LAN_NODE_ID used in Broadcom cards */
+};
+
+static int cistpl_funce_whitelisted(unsigned char type)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(funce_type_whitelist); i++) {
+		if (funce_type_whitelist[i] == type)
+			return 1;
+	}
+	return 0;
+}
+
 static int cistpl_funce_common(struct mmc_card *card,
 			       const unsigned char *buf, unsigned size)
 {
@@ -120,6 +136,10 @@
 	unsigned vsn;
 	unsigned min_size;
 
+	/* let SDIO drivers take care of whitelisted FUNCE tuples */
+	if (cistpl_funce_whitelisted(buf[0]))
+		return -EILSEQ;
+
 	vsn = func->card->cccr.sdio_vsn;
 	min_size = (vsn == SDIO_SDIO_REV_1_00) ? 28 : 42;
 
@@ -154,13 +174,12 @@
 	else
 		ret = cistpl_funce_common(card, buf, size);
 
-	if (ret) {
+	if (ret && ret != -EILSEQ) {
 		printk(KERN_ERR "%s: bad CISTPL_FUNCE size %u "
 		       "type %u\n", mmc_hostname(card->host), size, buf[0]);
-		return ret;
 	}
 
-	return 0;
+	return ret;
 }
 
 typedef int (tpl_parse_t)(struct mmc_card *, struct sdio_func *,
@@ -253,8 +272,33 @@
 		for (i = 0; i < ARRAY_SIZE(cis_tpl_list); i++)
 			if (cis_tpl_list[i].code == tpl_code)
 				break;
-		if (i >= ARRAY_SIZE(cis_tpl_list)) {
-			/* this tuple is unknown to the core */
+		if (i < ARRAY_SIZE(cis_tpl_list)) {
+			const struct cis_tpl *tpl = cis_tpl_list + i;
+			if (tpl_link < tpl->min_size) {
+				printk(KERN_ERR
+				       "%s: bad CIS tuple 0x%02x"
+				       " (length = %u, expected >= %u)\n",
+				       mmc_hostname(card->host),
+				       tpl_code, tpl_link, tpl->min_size);
+				ret = -EINVAL;
+			} else if (tpl->parse) {
+				ret = tpl->parse(card, func,
+						 this->data, tpl_link);
+			}
+			/*
+			 * We don't need the tuple anymore if it was
+			 * successfully parsed by the SDIO core or if it is
+			 * not going to be parsed by SDIO drivers.
+			 */
+			if (!ret || ret != -EILSEQ)
+				kfree(this);
+		} else {
+			/* unknown tuple */
+			ret = -EILSEQ;
+		}
+
+		if (ret == -EILSEQ) {
+			/* this tuple is unknown to the core or whitelisted */
 			this->next = NULL;
 			this->code = tpl_code;
 			this->size = tpl_link;
@@ -263,19 +307,8 @@
 			printk(KERN_DEBUG
 			       "%s: queuing CIS tuple 0x%02x length %u\n",
 			       mmc_hostname(card->host), tpl_code, tpl_link);
-		} else {
-			const struct cis_tpl *tpl = cis_tpl_list + i;
-			if (tpl_link < tpl->min_size) {
-				printk(KERN_ERR
-				       "%s: bad CIS tuple 0x%02x (length = %u, expected >= %u)\n",
-				       mmc_hostname(card->host),
-				       tpl_code, tpl_link, tpl->min_size);
-				ret = -EINVAL;
-			} else if (tpl->parse) {
-				ret = tpl->parse(card, func,
-						 this->data, tpl_link);
-			}
-			kfree(this);
+			/* keep on analyzing tuples */
+			ret = 0;
 		}
 
 		ptr += tpl_link;
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 7cb057f..432ae83 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -276,6 +276,47 @@
 
 	  If unsure, say N.
 
+config MMC_S3C_HW_SDIO_IRQ
+       bool "Hardware support for SDIO IRQ"
+       depends on MMC_S3C
+       help
+         Enable the hardware support for SDIO interrupts instead of using
+	 the generic polling code.
+
+choice
+	prompt "Samsung S3C SD/MMC transfer code"
+	depends on MMC_S3C
+
+config MMC_S3C_PIO
+	bool "Use PIO transfers only"
+	help
+	  Use PIO to transfer data between memory and the hardware.
+
+	  PIO is slower than DMA as it requires CPU instructions to
+	  move the data. This has been the traditional default for
+	  the S3C MCI driver.
+
+config MMC_S3C_DMA
+	bool "Use DMA transfers only (EXPERIMENTAL)"
+	depends on EXPERIMENTAL
+	help
+	  Use DMA to transfer data between memory and the hardare.
+
+	  Currently, the DMA support in this driver seems to not be
+	  working properly and needs to be debugged before this
+	  option is useful.
+
+config MMC_S3C_PIODMA
+	bool "Support for both PIO and DMA (EXPERIMENTAL)"
+	help
+	  Compile both the PIO and DMA transfer routines into the
+	  driver and let the platform select at run-time which one
+	  is best.
+
+	  See notes for the DMA option.
+
+endchoice
+
 config MMC_SDRICOH_CS
 	tristate "MMC/SD driver for Ricoh Bay1Controllers (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PCI && PCMCIA
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 8741d0f..705a589 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -22,12 +22,13 @@
 #include <linux/clk.h>
 #include <linux/scatterlist.h>
 #include <linux/gpio.h>
+#include <linux/amba/mmci.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/cacheflush.h>
 #include <asm/div64.h>
 #include <asm/io.h>
 #include <asm/sizes.h>
-#include <asm/mach/mmc.h>
 
 #include "mmci.h"
 
@@ -38,6 +39,36 @@
 
 static unsigned int fmax = 515633;
 
+/*
+ * This must be called with host->lock held
+ */
+static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
+{
+	u32 clk = 0;
+
+	if (desired) {
+		if (desired >= host->mclk) {
+			clk = MCI_CLK_BYPASS;
+			host->cclk = host->mclk;
+		} else {
+			clk = host->mclk / (2 * desired) - 1;
+			if (clk >= 256)
+				clk = 255;
+			host->cclk = host->mclk / (2 * (clk + 1));
+		}
+		if (host->hw_designer == 0x80)
+			clk |= MCI_FCEN; /* Bug fix in ST IP block */
+		clk |= MCI_CLK_ENABLE;
+		/* This hasn't proven to be worthwhile */
+		/* clk |= MCI_CLK_PWRSAVE; */
+	}
+
+	if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
+		clk |= MCI_WIDE_BUS;
+
+	writel(clk, host->base + MMCICLOCK);
+}
+
 static void
 mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
 {
@@ -419,30 +450,31 @@
 static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 {
 	struct mmci_host *host = mmc_priv(mmc);
-	u32 clk = 0, pwr = 0;
-
-	if (ios->clock) {
-		if (ios->clock >= host->mclk) {
-			clk = MCI_CLK_BYPASS;
-			host->cclk = host->mclk;
-		} else {
-			clk = host->mclk / (2 * ios->clock) - 1;
-			if (clk >= 256)
-				clk = 255;
-			host->cclk = host->mclk / (2 * (clk + 1));
-		}
-		if (host->hw_designer == AMBA_VENDOR_ST)
-			clk |= MCI_FCEN; /* Bug fix in ST IP block */
-		clk |= MCI_CLK_ENABLE;
-	}
-
-	if (host->plat->translate_vdd)
-		pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
+	u32 pwr = 0;
+	unsigned long flags;
 
 	switch (ios->power_mode) {
 	case MMC_POWER_OFF:
+		if(host->vcc &&
+		   regulator_is_enabled(host->vcc))
+			regulator_disable(host->vcc);
 		break;
 	case MMC_POWER_UP:
+#ifdef CONFIG_REGULATOR
+		if (host->vcc)
+			/* This implicitly enables the regulator */
+			mmc_regulator_set_ocr(host->vcc, ios->vdd);
+#endif
+		/*
+		 * The translate_vdd function is not used if you have
+		 * an external regulator, or your design is really weird.
+		 * Using it would mean sending in power control BOTH using
+		 * a regulator AND the 4 MMCIPWR bits. If we don't have
+		 * a regulator, we might have some other platform specific
+		 * power control behind this translate function.
+		 */
+		if (!host->vcc && host->plat->translate_vdd)
+			pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
 		/* The ST version does not have this, fall through to POWER_ON */
 		if (host->hw_designer != AMBA_VENDOR_ST) {
 			pwr |= MCI_PWR_UP;
@@ -465,12 +497,16 @@
 		}
 	}
 
-	writel(clk, host->base + MMCICLOCK);
+	spin_lock_irqsave(&host->lock, flags);
+
+	mmci_set_clkreg(host, ios->clock);
 
 	if (host->pwr != pwr) {
 		host->pwr = pwr;
 		writel(pwr, host->base + MMCIPOWER);
 	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
 }
 
 static int mmci_get_ro(struct mmc_host *mmc)
@@ -517,7 +553,7 @@
 
 static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
 {
-	struct mmc_platform_data *plat = dev->dev.platform_data;
+	struct mmci_platform_data *plat = dev->dev.platform_data;
 	struct mmci_host *host;
 	struct mmc_host *mmc;
 	int ret;
@@ -583,7 +619,30 @@
 	mmc->ops = &mmci_ops;
 	mmc->f_min = (host->mclk + 511) / 512;
 	mmc->f_max = min(host->mclk, fmax);
-	mmc->ocr_avail = plat->ocr_mask;
+#ifdef CONFIG_REGULATOR
+	/* If we're using the regulator framework, try to fetch a regulator */
+	host->vcc = regulator_get(&dev->dev, "vmmc");
+	if (IS_ERR(host->vcc))
+		host->vcc = NULL;
+	else {
+		int mask = mmc_regulator_get_ocrmask(host->vcc);
+
+		if (mask < 0)
+			dev_err(&dev->dev, "error getting OCR mask (%d)\n",
+				mask);
+		else {
+			host->mmc->ocr_avail = (u32) mask;
+			if (plat->ocr_mask)
+				dev_warn(&dev->dev,
+				 "Provided ocr_mask/setpower will not be used "
+				 "(using regulator instead)\n");
+		}
+	}
+#endif
+	/* Fall back to platform data if no regulator is found */
+	if (host->vcc == NULL)
+		mmc->ocr_avail = plat->ocr_mask;
+	mmc->caps = plat->capabilities;
 
 	/*
 	 * We can do SGIO
@@ -619,7 +678,6 @@
 	writel(0, host->base + MMCIMASK1);
 	writel(0xfff, host->base + MMCICLEAR);
 
-#ifdef CONFIG_GPIOLIB
 	if (gpio_is_valid(plat->gpio_cd)) {
 		ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
 		if (ret == 0)
@@ -638,7 +696,6 @@
 		else if (ret != -ENOSYS)
 			goto err_gpio_wp;
 	}
-#endif
 
 	ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
 	if (ret)
@@ -720,6 +777,10 @@
 		clk_disable(host->clk);
 		clk_put(host->clk);
 
+		if (regulator_is_enabled(host->vcc))
+			regulator_disable(host->vcc);
+		regulator_put(host->vcc);
+
 		mmc_free_host(mmc);
 
 		amba_release_regions(dev);
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 839f264..1ceb9a9 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -161,7 +161,7 @@
 	unsigned int		mclk;
 	unsigned int		cclk;
 	u32			pwr;
-	struct mmc_platform_data *plat;
+	struct mmci_platform_data *plat;
 
 	u8			hw_designer;
 	u8			hw_revision:4;
@@ -175,6 +175,7 @@
 	struct scatterlist	*sg_ptr;
 	unsigned int		sg_off;
 	unsigned int		size;
+	struct regulator	*vcc;
 };
 
 static inline void mmci_init_sg(struct mmci_host *host, struct mmc_data *data)
diff --git a/drivers/mmc/host/pxamci.c b/drivers/mmc/host/pxamci.c
index e55ac79..5e0b152 100644
--- a/drivers/mmc/host/pxamci.c
+++ b/drivers/mmc/host/pxamci.c
@@ -28,6 +28,7 @@
 #include <linux/mmc/host.h>
 #include <linux/io.h>
 #include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
 
 #include <asm/sizes.h>
 
@@ -96,10 +97,18 @@
 
 static inline void pxamci_set_power(struct pxamci_host *host, unsigned int vdd)
 {
+	int on;
+
 #ifdef CONFIG_REGULATOR
 	if (host->vcc)
 		mmc_regulator_set_ocr(host->vcc, vdd);
 #endif
+	if (!host->vcc && host->pdata &&
+	    gpio_is_valid(host->pdata->gpio_power)) {
+		on = ((1 << vdd) & host->pdata->ocr_mask);
+		gpio_set_value(host->pdata->gpio_power,
+			       !!on ^ host->pdata->gpio_power_invert);
+	}
 	if (!host->vcc && host->pdata && host->pdata->setpower)
 		host->pdata->setpower(mmc_dev(host->mmc), vdd);
 }
@@ -421,6 +430,12 @@
 {
 	struct pxamci_host *host = mmc_priv(mmc);
 
+	if (host->pdata && gpio_is_valid(host->pdata->gpio_card_ro)) {
+		if (host->pdata->gpio_card_ro_invert)
+			return !gpio_get_value(host->pdata->gpio_card_ro);
+		else
+			return gpio_get_value(host->pdata->gpio_card_ro);
+	}
 	if (host->pdata && host->pdata->get_ro)
 		return !!host->pdata->get_ro(mmc_dev(mmc));
 	/*
@@ -534,7 +549,7 @@
 	struct mmc_host *mmc;
 	struct pxamci_host *host = NULL;
 	struct resource *r, *dmarx, *dmatx;
-	int ret, irq;
+	int ret, irq, gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
@@ -661,13 +676,63 @@
 	}
 	host->dma_drcmrtx = dmatx->start;
 
+	if (host->pdata) {
+		gpio_cd = host->pdata->gpio_card_detect;
+		gpio_ro = host->pdata->gpio_card_ro;
+		gpio_power = host->pdata->gpio_power;
+	}
+	if (gpio_is_valid(gpio_power)) {
+		ret = gpio_request(gpio_power, "mmc card power");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_power %d\n", gpio_power);
+			goto out;
+		}
+		gpio_direction_output(gpio_power,
+				      host->pdata->gpio_power_invert);
+	}
+	if (gpio_is_valid(gpio_ro)) {
+		ret = gpio_request(gpio_ro, "mmc card read only");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_ro %d\n", gpio_power);
+			goto err_gpio_ro;
+		}
+		gpio_direction_input(gpio_ro);
+	}
+	if (gpio_is_valid(gpio_cd)) {
+		ret = gpio_request(gpio_cd, "mmc card detect");
+		if (ret) {
+			dev_err(&pdev->dev, "Failed requesting gpio_cd %d\n", gpio_power);
+			goto err_gpio_cd;
+		}
+		gpio_direction_input(gpio_cd);
+
+		ret = request_irq(gpio_to_irq(gpio_cd), pxamci_detect_irq,
+				  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				  "mmc card detect", mmc);
+		if (ret) {
+			dev_err(&pdev->dev, "failed to request card detect IRQ\n");
+			goto err_request_irq;
+		}
+	}
+
 	if (host->pdata && host->pdata->init)
 		host->pdata->init(&pdev->dev, pxamci_detect_irq, mmc);
 
+	if (gpio_is_valid(gpio_power) && host->pdata->setpower)
+		dev_warn(&pdev->dev, "gpio_power and setpower() both defined\n");
+	if (gpio_is_valid(gpio_ro) && host->pdata->get_ro)
+		dev_warn(&pdev->dev, "gpio_ro and get_ro() both defined\n");
+
 	mmc_add_host(mmc);
 
 	return 0;
 
+err_request_irq:
+	gpio_free(gpio_cd);
+err_gpio_cd:
+	gpio_free(gpio_ro);
+err_gpio_ro:
+	gpio_free(gpio_power);
  out:
 	if (host) {
 		if (host->dma >= 0)
@@ -688,12 +753,26 @@
 static int pxamci_remove(struct platform_device *pdev)
 {
 	struct mmc_host *mmc = platform_get_drvdata(pdev);
+	int gpio_cd = -1, gpio_ro = -1, gpio_power = -1;
 
 	platform_set_drvdata(pdev, NULL);
 
 	if (mmc) {
 		struct pxamci_host *host = mmc_priv(mmc);
 
+		if (host->pdata) {
+			gpio_cd = host->pdata->gpio_card_detect;
+			gpio_ro = host->pdata->gpio_card_ro;
+			gpio_power = host->pdata->gpio_power;
+		}
+		if (gpio_is_valid(gpio_cd)) {
+			free_irq(gpio_to_irq(gpio_cd), mmc);
+			gpio_free(gpio_cd);
+		}
+		if (gpio_is_valid(gpio_ro))
+			gpio_free(gpio_ro);
+		if (gpio_is_valid(gpio_power))
+			gpio_free(gpio_power);
 		if (host->vcc)
 			regulator_put(host->vcc);
 
@@ -725,20 +804,20 @@
 }
 
 #ifdef CONFIG_PM
-static int pxamci_suspend(struct platform_device *dev, pm_message_t state)
+static int pxamci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (mmc)
-		ret = mmc_suspend_host(mmc, state);
+		ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
 
 	return ret;
 }
 
-static int pxamci_resume(struct platform_device *dev)
+static int pxamci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (mmc)
@@ -746,19 +825,22 @@
 
 	return ret;
 }
-#else
-#define pxamci_suspend	NULL
-#define pxamci_resume	NULL
+
+static struct dev_pm_ops pxamci_pm_ops = {
+	.suspend	= pxamci_suspend,
+	.resume		= pxamci_resume,
+};
 #endif
 
 static struct platform_driver pxamci_driver = {
 	.probe		= pxamci_probe,
 	.remove		= pxamci_remove,
-	.suspend	= pxamci_suspend,
-	.resume		= pxamci_resume,
 	.driver		= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxamci_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 8c08cd7..99b74a3 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -17,6 +17,8 @@
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/cpufreq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
 #include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/io.h>
@@ -58,8 +60,6 @@
 		dev_dbg(&host->pdev->dev, args);  \
 	} while (0)
 
-#define RESSIZE(ressource) (((ressource)->end - (ressource)->start)+1)
-
 static struct s3c2410_dma_client s3cmci_dma_client = {
 	.name		= "s3c-mci",
 };
@@ -164,6 +164,40 @@
 
 #endif /* CONFIG_MMC_DEBUG */
 
+/**
+ * s3cmci_host_usedma - return whether the host is using dma or pio
+ * @host: The host state
+ *
+ * Return true if the host is using DMA to transfer data, else false
+ * to use PIO mode. Will return static data depending on the driver
+ * configuration.
+ */
+static inline bool s3cmci_host_usedma(struct s3cmci_host *host)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+	return false;
+#elif defined(CONFIG_MMC_S3C_DMA)
+	return true;
+#else
+	return host->dodma;
+#endif
+}
+
+/**
+ * s3cmci_host_canpio - return true if host has pio code available
+ *
+ * Return true if the driver has been compiled with the PIO support code
+ * available.
+ */
+static inline bool s3cmci_host_canpio(void)
+{
+#ifdef CONFIG_MMC_S3C_PIO
+	return true;
+#else
+	return false;
+#endif
+}
+
 static inline u32 enable_imask(struct s3cmci_host *host, u32 imask)
 {
 	u32 newmask;
@@ -190,7 +224,33 @@
 
 static inline void clear_imask(struct s3cmci_host *host)
 {
-	writel(0, host->base + host->sdiimsk);
+	u32 mask = readl(host->base + host->sdiimsk);
+
+	/* preserve the SDIO IRQ mask state */
+	mask &= S3C2410_SDIIMSK_SDIOIRQ;
+	writel(mask, host->base + host->sdiimsk);
+}
+
+/**
+ * s3cmci_check_sdio_irq - test whether the SDIO IRQ is being signalled
+ * @host: The host to check.
+ *
+ * Test to see if the SDIO interrupt is being signalled in case the
+ * controller has failed to re-detect a card interrupt. Read GPE8 and
+ * see if it is low and if so, signal a SDIO interrupt.
+ *
+ * This is currently called if a request is finished (we assume that the
+ * bus is now idle) and when the SDIO IRQ is enabled in case the IRQ is
+ * already being indicated.
+*/
+static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
+{
+	if (host->sdio_irqen) {
+		if (gpio_get_value(S3C2410_GPE(8)) == 0) {
+			printk(KERN_DEBUG "%s: signalling irq\n", __func__);
+			mmc_signal_sdio_irq(host->mmc);
+		}
+	}
 }
 
 static inline int get_data_buffer(struct s3cmci_host *host,
@@ -238,6 +298,64 @@
 	return 63 - fifostat;
 }
 
+/**
+ * s3cmci_enable_irq - enable IRQ, after having disabled it.
+ * @host: The device state.
+ * @more: True if more IRQs are expected from transfer.
+ *
+ * Enable the main IRQ if needed after it has been disabled.
+ *
+ * The IRQ can be one of the following states:
+ *	- disabled during IDLE
+ *	- disabled whilst processing data
+ *	- enabled during transfer
+ *	- enabled whilst awaiting SDIO interrupt detection
+ */
+static void s3cmci_enable_irq(struct s3cmci_host *host, bool more)
+{
+	unsigned long flags;
+	bool enable = false;
+
+	local_irq_save(flags);
+
+	host->irq_enabled = more;
+	host->irq_disabled = false;
+
+	enable = more | host->sdio_irqen;
+
+	if (host->irq_state != enable) {
+		host->irq_state = enable;
+
+		if (enable)
+			enable_irq(host->irq);
+		else
+			disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
+/**
+ *
+ */
+static void s3cmci_disable_irq(struct s3cmci_host *host, bool transfer)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	//printk(KERN_DEBUG "%s: transfer %d\n", __func__, transfer);
+
+	host->irq_disabled = transfer;
+
+	if (transfer && host->irq_state) {
+		host->irq_state = false;
+		disable_irq(host->irq);
+	}
+
+	local_irq_restore(flags);
+}
+
 static void do_pio_read(struct s3cmci_host *host)
 {
 	int res;
@@ -374,8 +492,7 @@
 {
 	struct s3cmci_host *host = (struct s3cmci_host *) data;
 
-
-	disable_irq(host->irq);
+	s3cmci_disable_irq(host, true);
 
 	if (host->pio_active == XFER_WRITE)
 		do_pio_write(host);
@@ -395,9 +512,10 @@
 				host->mrq->data->error = -EINVAL;
 		}
 
+		s3cmci_enable_irq(host, false);
 		finalize_request(host);
 	} else
-		enable_irq(host->irq);
+		s3cmci_enable_irq(host, true);
 }
 
 /*
@@ -432,17 +550,27 @@
 	struct s3cmci_host *host = dev_id;
 	struct mmc_command *cmd;
 	u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt, mci_imsk;
-	u32 mci_cclear, mci_dclear;
+	u32 mci_cclear = 0, mci_dclear;
 	unsigned long iflags;
 
+	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
+	mci_imsk = readl(host->base + host->sdiimsk);
+
+	if (mci_dsta & S3C2410_SDIDSTA_SDIOIRQDETECT) {
+		if (mci_imsk & S3C2410_SDIIMSK_SDIOIRQ) {
+			mci_dclear = S3C2410_SDIDSTA_SDIOIRQDETECT;
+			writel(mci_dclear, host->base + S3C2410_SDIDSTA);
+
+			mmc_signal_sdio_irq(host->mmc);
+			return IRQ_HANDLED;
+		}
+	}
+
 	spin_lock_irqsave(&host->complete_lock, iflags);
 
 	mci_csta = readl(host->base + S3C2410_SDICMDSTAT);
-	mci_dsta = readl(host->base + S3C2410_SDIDSTA);
 	mci_dcnt = readl(host->base + S3C2410_SDIDCNT);
 	mci_fsta = readl(host->base + S3C2410_SDIFSTA);
-	mci_imsk = readl(host->base + host->sdiimsk);
-	mci_cclear = 0;
 	mci_dclear = 0;
 
 	if ((host->complete_what == COMPLETION_NONE) ||
@@ -466,7 +594,7 @@
 		goto irq_out;
 	}
 
-	if (!host->dodma) {
+	if (!s3cmci_host_usedma(host)) {
 		if ((host->pio_active == XFER_WRITE) &&
 		    (mci_fsta & S3C2410_SDIFSTA_TFDET)) {
 
@@ -673,6 +801,7 @@
 	dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n",
 		size, mci_dsta, mci_dcnt);
 
+	host->dma_complete = 1;
 	host->complete_what = COMPLETION_FINALIZE;
 
 out:
@@ -683,9 +812,9 @@
 fail_request:
 	host->mrq->data->error = -EINVAL;
 	host->complete_what = COMPLETION_FINALIZE;
-	writel(0, host->base + host->sdiimsk);
-	goto out;
+	clear_imask(host);
 
+	goto out;
 }
 
 static void finalize_request(struct s3cmci_host *host)
@@ -702,8 +831,9 @@
 
 	if (cmd->data && (cmd->error == 0) &&
 	    (cmd->data->error == 0)) {
-		if (host->dodma && (!host->dma_complete)) {
-			dbg(host, dbg_dma, "DMA Missing!\n");
+		if (s3cmci_host_usedma(host) && (!host->dma_complete)) {
+			dbg(host, dbg_dma, "DMA Missing (%d)!\n",
+			    host->dma_complete);
 			return;
 		}
 	}
@@ -728,7 +858,7 @@
 	writel(0, host->base + S3C2410_SDICMDARG);
 	writel(S3C2410_SDIDCON_STOP, host->base + S3C2410_SDIDCON);
 	writel(0, host->base + S3C2410_SDICMDCON);
-	writel(0, host->base + host->sdiimsk);
+	clear_imask(host);
 
 	if (cmd->data && cmd->error)
 		cmd->data->error = cmd->error;
@@ -754,7 +884,7 @@
 	/* If we had an error while transfering data we flush the
 	 * DMA channel and the fifo to clear out any garbage. */
 	if (mrq->data->error != 0) {
-		if (host->dodma)
+		if (s3cmci_host_usedma(host))
 			s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 		if (host->is2440) {
@@ -776,6 +906,8 @@
 request_done:
 	host->complete_what = COMPLETION_NONE;
 	host->mrq = NULL;
+
+	s3cmci_check_sdio_irq(host);
 	mmc_request_done(host->mmc, mrq);
 }
 
@@ -872,7 +1004,7 @@
 
 	dcon  = data->blocks & S3C2410_SDIDCON_BLKNUM_MASK;
 
-	if (host->dodma)
+	if (s3cmci_host_usedma(host))
 		dcon |= S3C2410_SDIDCON_DMAEN;
 
 	if (host->bus_width == MMC_BUS_WIDTH_4)
@@ -950,7 +1082,7 @@
 static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data)
 {
 	int dma_len, i;
-	int rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+	int rw = data->flags & MMC_DATA_WRITE;
 
 	BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR);
 
@@ -958,7 +1090,7 @@
 	s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH);
 
 	dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
-			     (rw) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+			     rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
 
 	if (dma_len == 0)
 		return -ENOMEM;
@@ -969,11 +1101,11 @@
 	for (i = 0; i < dma_len; i++) {
 		int res;
 
-		dbg(host, dbg_dma, "enqueue %i:%u@%u\n", i,
-			sg_dma_address(&data->sg[i]),
-			sg_dma_len(&data->sg[i]));
+		dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i,
+		    sg_dma_address(&data->sg[i]),
+		    sg_dma_len(&data->sg[i]));
 
-		res = s3c2410_dma_enqueue(host->dma, (void *) host,
+		res = s3c2410_dma_enqueue(host->dma, host,
 					  sg_dma_address(&data->sg[i]),
 					  sg_dma_len(&data->sg[i]));
 
@@ -1018,7 +1150,7 @@
 			return;
 		}
 
-		if (host->dodma)
+		if (s3cmci_host_usedma(host))
 			res = s3cmci_prepare_dma(host, cmd->data);
 		else
 			res = s3cmci_prepare_pio(host, cmd->data);
@@ -1037,7 +1169,7 @@
 	s3cmci_send_command(host, cmd);
 
 	/* Enable Interrupt */
-	enable_irq(host->irq);
+	s3cmci_enable_irq(host, true);
 }
 
 static int s3cmci_card_present(struct mmc_host *mmc)
@@ -1049,7 +1181,7 @@
 	if (pdata->gpio_detect == 0)
 		return -ENOSYS;
 
-	ret = s3c2410_gpio_getpin(pdata->gpio_detect) ? 0 : 1;
+	ret = gpio_get_value(pdata->gpio_detect) ? 0 : 1;
 	return ret ^ pdata->detect_invert;
 }
 
@@ -1104,12 +1236,12 @@
 	switch (ios->power_mode) {
 	case MMC_POWER_ON:
 	case MMC_POWER_UP:
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_SDCLK);
-		s3c2410_gpio_cfgpin(S3C2410_GPE6, S3C2410_GPE6_SDCMD);
-		s3c2410_gpio_cfgpin(S3C2410_GPE7, S3C2410_GPE7_SDDAT0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-		s3c2410_gpio_cfgpin(S3C2410_GPE9, S3C2410_GPE9_SDDAT2);
-		s3c2410_gpio_cfgpin(S3C2410_GPE10, S3C2410_GPE10_SDDAT3);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(5), S3C2410_GPE5_SDCLK);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(6), S3C2410_GPE6_SDCMD);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(7), S3C2410_GPE7_SDDAT0);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(9), S3C2410_GPE9_SDDAT2);
+		s3c2410_gpio_cfgpin(S3C2410_GPE(10), S3C2410_GPE10_SDDAT3);
 
 		if (host->pdata->set_power)
 			host->pdata->set_power(ios->power_mode, ios->vdd);
@@ -1121,8 +1253,7 @@
 
 	case MMC_POWER_OFF:
 	default:
-		s3c2410_gpio_setpin(S3C2410_GPE5, 0);
-		s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
+		gpio_direction_output(S3C2410_GPE(5), 0);
 
 		if (host->is2440)
 			mci_con |= S3C2440_SDICON_SDRESET;
@@ -1168,7 +1299,7 @@
 	struct s3c24xx_mci_pdata *pdata = host->pdata;
 	int ret;
 
-	if (pdata->gpio_wprotect == 0)
+	if (pdata->no_wprotect)
 		return 0;
 
 	ret = s3c2410_gpio_getpin(pdata->gpio_wprotect);
@@ -1179,11 +1310,52 @@
 	return ret;
 }
 
+static void s3cmci_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+	struct s3cmci_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	u32 con;
+
+	local_irq_save(flags);
+
+	con = readl(host->base + S3C2410_SDICON);
+	host->sdio_irqen = enable;
+
+	if (enable == host->sdio_irqen)
+		goto same_state;
+
+	if (enable) {
+		con |= S3C2410_SDICON_SDIOIRQ;
+		enable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+
+		if (!host->irq_state && !host->irq_disabled) {
+			host->irq_state = true;
+			enable_irq(host->irq);
+		}
+	} else {
+		disable_imask(host, S3C2410_SDIIMSK_SDIOIRQ);
+		con &= ~S3C2410_SDICON_SDIOIRQ;
+
+		if (!host->irq_enabled && host->irq_state) {
+			disable_irq_nosync(host->irq);
+			host->irq_state = false;
+		}
+	}
+
+	writel(con, host->base + S3C2410_SDICON);
+
+ same_state:
+	local_irq_restore(flags);
+
+	s3cmci_check_sdio_irq(host);
+}
+
 static struct mmc_host_ops s3cmci_ops = {
 	.request	= s3cmci_request,
 	.set_ios	= s3cmci_set_ios,
 	.get_ro		= s3cmci_get_ro,
 	.get_cd		= s3cmci_card_present,
+	.enable_sdio_irq = s3cmci_enable_sdio_irq,
 };
 
 static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
@@ -1246,11 +1418,140 @@
 }
 #endif
 
-static int __devinit s3cmci_probe(struct platform_device *pdev, int is2440)
+
+#ifdef CONFIG_DEBUG_FS
+
+static int s3cmci_state_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+
+	seq_printf(seq, "Register base = 0x%08x\n", (u32)host->base);
+	seq_printf(seq, "Clock rate = %ld\n", host->clk_rate);
+	seq_printf(seq, "Prescale = %d\n", host->prescaler);
+	seq_printf(seq, "is2440 = %d\n", host->is2440);
+	seq_printf(seq, "IRQ = %d\n", host->irq);
+	seq_printf(seq, "IRQ enabled = %d\n", host->irq_enabled);
+	seq_printf(seq, "IRQ disabled = %d\n", host->irq_disabled);
+	seq_printf(seq, "IRQ state = %d\n", host->irq_state);
+	seq_printf(seq, "CD IRQ = %d\n", host->irq_cd);
+	seq_printf(seq, "Do DMA = %d\n", s3cmci_host_usedma(host));
+	seq_printf(seq, "SDIIMSK at %d\n", host->sdiimsk);
+	seq_printf(seq, "SDIDATA at %d\n", host->sdidata);
+
+	return 0;
+}
+
+static int s3cmci_state_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_state_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_state = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_state_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+#define DBG_REG(_r) { .addr = S3C2410_SDI##_r, .name = #_r }
+
+struct s3cmci_reg {
+	unsigned short	addr;
+	unsigned char	*name;
+} debug_regs[] = {
+	DBG_REG(CON),
+	DBG_REG(PRE),
+	DBG_REG(CMDARG),
+	DBG_REG(CMDCON),
+	DBG_REG(CMDSTAT),
+	DBG_REG(RSP0),
+	DBG_REG(RSP1),
+	DBG_REG(RSP2),
+	DBG_REG(RSP3),
+	DBG_REG(TIMER),
+	DBG_REG(BSIZE),
+	DBG_REG(DCON),
+	DBG_REG(DCNT),
+	DBG_REG(DSTA),
+	DBG_REG(FSTA),
+	{}
+};
+
+static int s3cmci_regs_show(struct seq_file *seq, void *v)
+{
+	struct s3cmci_host *host = seq->private;
+	struct s3cmci_reg *rptr = debug_regs;
+
+	for (; rptr->name; rptr++)
+		seq_printf(seq, "SDI%s\t=0x%08x\n", rptr->name,
+			   readl(host->base + rptr->addr));
+
+	seq_printf(seq, "SDIIMSK\t=0x%08x\n", readl(host->base + host->sdiimsk));
+
+	return 0;
+}
+
+static int s3cmci_regs_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, s3cmci_regs_show, inode->i_private);
+}
+
+static const struct file_operations s3cmci_fops_regs = {
+	.owner		= THIS_MODULE,
+	.open		= s3cmci_regs_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static void s3cmci_debugfs_attach(struct s3cmci_host *host)
+{
+	struct device *dev = &host->pdev->dev;
+
+	host->debug_root = debugfs_create_dir(dev_name(dev), NULL);
+	if (IS_ERR(host->debug_root)) {
+		dev_err(dev, "failed to create debugfs root\n");
+		return;
+	}
+
+	host->debug_state = debugfs_create_file("state", 0444,
+						host->debug_root, host,
+						&s3cmci_fops_state);
+
+	if (IS_ERR(host->debug_state))
+		dev_err(dev, "failed to create debug state file\n");
+
+	host->debug_regs = debugfs_create_file("regs", 0444,
+					       host->debug_root, host,
+					       &s3cmci_fops_regs);
+
+	if (IS_ERR(host->debug_regs))
+		dev_err(dev, "failed to create debug regs file\n");
+}
+
+static void s3cmci_debugfs_remove(struct s3cmci_host *host)
+{
+	debugfs_remove(host->debug_regs);
+	debugfs_remove(host->debug_state);
+	debugfs_remove(host->debug_root);
+}
+
+#else
+static inline void s3cmci_debugfs_attach(struct s3cmci_host *host) { }
+static inline void s3cmci_debugfs_remove(struct s3cmci_host *host) { }
+
+#endif /* CONFIG_DEBUG_FS */
+
+static int __devinit s3cmci_probe(struct platform_device *pdev)
 {
 	struct s3cmci_host *host;
 	struct mmc_host	*mmc;
 	int ret;
+	int is2440;
+	int i;
+
+	is2440 = platform_get_device_id(pdev)->driver_data;
 
 	mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
 	if (!mmc) {
@@ -1258,6 +1559,18 @@
 		goto probe_out;
 	}
 
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
+		ret = gpio_request(i, dev_name(&pdev->dev));
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get gpio %d\n", i);
+
+			for (i--; i >= S3C2410_GPE(5); i--)
+				gpio_free(i);
+
+			goto probe_free_host;
+		}
+	}
+
 	host = mmc_priv(mmc);
 	host->mmc 	= mmc;
 	host->pdev	= pdev;
@@ -1282,11 +1595,12 @@
 		host->clk_div	= 2;
 	}
 
-	host->dodma		= 0;
 	host->complete_what 	= COMPLETION_NONE;
 	host->pio_active 	= XFER_NONE;
 
-	host->dma		= S3CMCI_DMA;
+#ifdef CONFIG_MMC_S3C_PIODMA
+	host->dodma		= host->pdata->dma;
+#endif
 
 	host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!host->mem) {
@@ -1294,19 +1608,19 @@
 			"failed to get io memory region resouce.\n");
 
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_free_gpio;
 	}
 
 	host->mem = request_mem_region(host->mem->start,
-				       RESSIZE(host->mem), pdev->name);
+				       resource_size(host->mem), pdev->name);
 
 	if (!host->mem) {
 		dev_err(&pdev->dev, "failed to request io memory region.\n");
 		ret = -ENOENT;
-		goto probe_free_host;
+		goto probe_free_gpio;
 	}
 
-	host->base = ioremap(host->mem->start, RESSIZE(host->mem));
+	host->base = ioremap(host->mem->start, resource_size(host->mem));
 	if (!host->base) {
 		dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
 		ret = -EINVAL;
@@ -1331,31 +1645,60 @@
 	 * ensure we don't lock the system with un-serviceable requests. */
 
 	disable_irq(host->irq);
+	host->irq_state = false;
 
-	host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
-
-	if (host->irq_cd >= 0) {
-		if (request_irq(host->irq_cd, s3cmci_irq_cd,
-				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-				DRIVER_NAME, host)) {
-			dev_err(&pdev->dev, "can't get card detect irq.\n");
-			ret = -ENOENT;
+	if (!host->pdata->no_detect) {
+		ret = gpio_request(host->pdata->gpio_detect, "s3cmci detect");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get detect gpio\n");
 			goto probe_free_irq;
 		}
-	} else {
-		dev_warn(&pdev->dev, "host detect has no irq available\n");
-		s3c2410_gpio_cfgpin(host->pdata->gpio_detect,
-				    S3C2410_GPIO_INPUT);
+
+		host->irq_cd = s3c2410_gpio_getirq(host->pdata->gpio_detect);
+
+		if (host->irq_cd >= 0) {
+			if (request_irq(host->irq_cd, s3cmci_irq_cd,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					DRIVER_NAME, host)) {
+				dev_err(&pdev->dev,
+					"can't get card detect irq.\n");
+				ret = -ENOENT;
+				goto probe_free_gpio_cd;
+			}
+		} else {
+			dev_warn(&pdev->dev,
+				 "host detect has no irq available\n");
+			gpio_direction_input(host->pdata->gpio_detect);
+		}
+	} else
+		host->irq_cd = -1;
+
+	if (!host->pdata->no_wprotect) {
+		ret = gpio_request(host->pdata->gpio_wprotect, "s3cmci wp");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to get writeprotect\n");
+			goto probe_free_irq_cd;
+		}
+
+		gpio_direction_input(host->pdata->gpio_wprotect);
 	}
 
-	if (host->pdata->gpio_wprotect)
-		s3c2410_gpio_cfgpin(host->pdata->gpio_wprotect,
-				    S3C2410_GPIO_INPUT);
+	/* depending on the dma state, get a dma channel to use. */
 
-	if (s3c2410_dma_request(S3CMCI_DMA, &s3cmci_dma_client, NULL) < 0) {
-		dev_err(&pdev->dev, "unable to get DMA channel.\n");
-		ret = -EBUSY;
-		goto probe_free_irq_cd;
+	if (s3cmci_host_usedma(host)) {
+		host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client,
+						host);
+		if (host->dma < 0) {
+			dev_err(&pdev->dev, "cannot get DMA channel.\n");
+			if (!s3cmci_host_canpio()) {
+				ret = -EBUSY;
+				goto probe_free_gpio_wp;
+			} else {
+				dev_warn(&pdev->dev, "falling back to PIO.\n");
+				host->dodma = 0;
+			}
+		}
 	}
 
 	host->clk = clk_get(&pdev->dev, "sdi");
@@ -1363,7 +1706,7 @@
 		dev_err(&pdev->dev, "failed to find clock source.\n");
 		ret = PTR_ERR(host->clk);
 		host->clk = NULL;
-		goto probe_free_host;
+		goto probe_free_dma;
 	}
 
 	ret = clk_enable(host->clk);
@@ -1376,7 +1719,11 @@
 
 	mmc->ops 	= &s3cmci_ops;
 	mmc->ocr_avail	= MMC_VDD_32_33 | MMC_VDD_33_34;
+#ifdef CONFIG_MMC_S3C_HW_SDIO_IRQ
+	mmc->caps	= MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ;
+#else
 	mmc->caps	= MMC_CAP_4_BIT_DATA;
+#endif
 	mmc->f_min 	= host->clk_rate / (host->clk_div * 256);
 	mmc->f_max 	= host->clk_rate / host->clk_div;
 
@@ -1408,8 +1755,12 @@
 		goto free_cpufreq;
 	}
 
+	s3cmci_debugfs_attach(host);
+
 	platform_set_drvdata(pdev, mmc);
-	dev_info(&pdev->dev, "initialisation done.\n");
+	dev_info(&pdev->dev, "%s - using %s, %s SDIO IRQ\n", mmc_hostname(mmc),
+		 s3cmci_host_usedma(host) ? "dma" : "pio",
+		 mmc->caps & MMC_CAP_SDIO_IRQ ? "hw" : "sw");
 
 	return 0;
 
@@ -1422,6 +1773,18 @@
  clk_free:
 	clk_put(host->clk);
 
+ probe_free_dma:
+	if (s3cmci_host_usedma(host))
+		s3c2410_dma_free(host->dma, &s3cmci_dma_client);
+
+ probe_free_gpio_wp:
+	if (!host->pdata->no_wprotect)
+		gpio_free(host->pdata->gpio_wprotect);
+
+ probe_free_gpio_cd:
+	if (!host->pdata->no_detect)
+		gpio_free(host->pdata->gpio_detect);
+
  probe_free_irq_cd:
 	if (host->irq_cd >= 0)
 		free_irq(host->irq_cd, host);
@@ -1433,10 +1796,15 @@
 	iounmap(host->base);
 
  probe_free_mem_region:
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
+	release_mem_region(host->mem->start, resource_size(host->mem));
+
+ probe_free_gpio:
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+		gpio_free(i);
 
  probe_free_host:
 	mmc_free_host(mmc);
+
  probe_out:
 	return ret;
 }
@@ -1449,6 +1817,7 @@
 	if (host->irq_cd >= 0)
 		free_irq(host->irq_cd, host);
 
+	s3cmci_debugfs_remove(host);
 	s3cmci_cpufreq_deregister(host);
 	mmc_remove_host(mmc);
 	clk_disable(host->clk);
@@ -1458,104 +1827,102 @@
 {
 	struct mmc_host		*mmc  = platform_get_drvdata(pdev);
 	struct s3cmci_host	*host = mmc_priv(mmc);
+	struct s3c24xx_mci_pdata *pd = host->pdata;
+	int i;
 
 	s3cmci_shutdown(pdev);
 
 	clk_put(host->clk);
 
 	tasklet_disable(&host->pio_tasklet);
-	s3c2410_dma_free(S3CMCI_DMA, &s3cmci_dma_client);
+
+	if (s3cmci_host_usedma(host))
+		s3c2410_dma_free(host->dma, &s3cmci_dma_client);
 
 	free_irq(host->irq, host);
 
+	if (!pd->no_wprotect)
+		gpio_free(pd->gpio_wprotect);
+
+	if (!pd->no_detect)
+		gpio_free(pd->gpio_detect);
+
+	for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
+		gpio_free(i);
+
+
 	iounmap(host->base);
-	release_mem_region(host->mem->start, RESSIZE(host->mem));
+	release_mem_region(host->mem->start, resource_size(host->mem));
 
 	mmc_free_host(mmc);
 	return 0;
 }
 
-static int __devinit s3cmci_2410_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 0);
-}
+static struct platform_device_id s3cmci_driver_ids[] = {
+	{
+		.name	= "s3c2410-sdi",
+		.driver_data	= 0,
+	}, {
+		.name	= "s3c2412-sdi",
+		.driver_data	= 1,
+	}, {
+		.name	= "s3c2440-sdi",
+		.driver_data	= 1,
+	},
+	{ }
+};
 
-static int __devinit s3cmci_2412_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 1);
-}
+MODULE_DEVICE_TABLE(platform, s3cmci_driver_ids);
 
-static int __devinit s3cmci_2440_probe(struct platform_device *dev)
-{
-	return s3cmci_probe(dev, 1);
-}
 
 #ifdef CONFIG_PM
 
-static int s3cmci_suspend(struct platform_device *dev, pm_message_t state)
+static int s3cmci_suspend(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
+	struct pm_message event = { PM_EVENT_SUSPEND };
 
-	return  mmc_suspend_host(mmc, state);
+	return mmc_suspend_host(mmc, event);
 }
 
-static int s3cmci_resume(struct platform_device *dev)
+static int s3cmci_resume(struct device *dev)
 {
-	struct mmc_host *mmc = platform_get_drvdata(dev);
+	struct mmc_host *mmc = platform_get_drvdata(to_platform_device(dev));
 
 	return mmc_resume_host(mmc);
 }
 
+static struct dev_pm_ops s3cmci_pm = {
+	.suspend	= s3cmci_suspend,
+	.resume		= s3cmci_resume,
+};
+
+#define s3cmci_pm_ops &s3cmci_pm
 #else /* CONFIG_PM */
-#define s3cmci_suspend NULL
-#define s3cmci_resume NULL
+#define s3cmci_pm_ops NULL
 #endif /* CONFIG_PM */
 
 
-static struct platform_driver s3cmci_2410_driver = {
-	.driver.name	= "s3c2410-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2410_probe,
+static struct platform_driver s3cmci_driver = {
+	.driver	= {
+		.name	= "s3c-sdi",
+		.owner	= THIS_MODULE,
+		.pm	= s3cmci_pm_ops,
+	},
+	.id_table	= s3cmci_driver_ids,
+	.probe		= s3cmci_probe,
 	.remove		= __devexit_p(s3cmci_remove),
 	.shutdown	= s3cmci_shutdown,
-	.suspend	= s3cmci_suspend,
-	.resume		= s3cmci_resume,
 };
 
-static struct platform_driver s3cmci_2412_driver = {
-	.driver.name	= "s3c2412-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2412_probe,
-	.remove		= __devexit_p(s3cmci_remove),
-	.shutdown	= s3cmci_shutdown,
-	.suspend	= s3cmci_suspend,
-	.resume		= s3cmci_resume,
-};
-
-static struct platform_driver s3cmci_2440_driver = {
-	.driver.name	= "s3c2440-sdi",
-	.driver.owner	= THIS_MODULE,
-	.probe		= s3cmci_2440_probe,
-	.remove		= __devexit_p(s3cmci_remove),
-	.shutdown	= s3cmci_shutdown,
-	.suspend	= s3cmci_suspend,
-	.resume		= s3cmci_resume,
-};
-
-
 static int __init s3cmci_init(void)
 {
-	platform_driver_register(&s3cmci_2410_driver);
-	platform_driver_register(&s3cmci_2412_driver);
-	platform_driver_register(&s3cmci_2440_driver);
-	return 0;
+	return platform_driver_register(&s3cmci_driver);
 }
 
 static void __exit s3cmci_exit(void)
 {
-	platform_driver_unregister(&s3cmci_2410_driver);
-	platform_driver_unregister(&s3cmci_2412_driver);
-	platform_driver_unregister(&s3cmci_2440_driver);
+	platform_driver_unregister(&s3cmci_driver);
 }
 
 module_init(s3cmci_init);
@@ -1564,6 +1931,3 @@
 MODULE_DESCRIPTION("Samsung S3C MMC/SD Card Interface driver");
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Thomas Kleffel <tk@maintech.de>, Ben Dooks <ben-linux@fluff.org>");
-MODULE_ALIAS("platform:s3c2410-sdi");
-MODULE_ALIAS("platform:s3c2412-sdi");
-MODULE_ALIAS("platform:s3c2440-sdi");
diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h
index ca1ba3d..c76b53d 100644
--- a/drivers/mmc/host/s3cmci.h
+++ b/drivers/mmc/host/s3cmci.h
@@ -8,9 +8,6 @@
  * published by the Free Software Foundation.
  */
 
-/* FIXME: DMA Resource management ?! */
-#define S3CMCI_DMA 0
-
 enum s3cmci_waitfor {
 	COMPLETION_NONE,
 	COMPLETION_FINALIZE,
@@ -42,6 +39,11 @@
 	int			dodma;
 	int			dmatogo;
 
+	bool			irq_disabled;
+	bool			irq_enabled;
+	bool			irq_state;
+	int			sdio_irqen;
+
 	struct mmc_request	*mrq;
 	int			cmd_is_stop;
 
@@ -68,6 +70,12 @@
 	unsigned int		ccnt, dcnt;
 	struct tasklet_struct	pio_tasklet;
 
+#ifdef CONFIG_DEBUG_FS
+	struct dentry		*debug_root;
+	struct dentry		*debug_state;
+	struct dentry		*debug_regs;
+#endif
+
 #ifdef CONFIG_CPU_FREQ
 	struct notifier_block	freq_transition;
 #endif
diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
index 0acbf4f..8ca17a3 100644
--- a/drivers/mtd/mtd_blkdevs.c
+++ b/drivers/mtd/mtd_blkdevs.c
@@ -32,14 +32,6 @@
 	spinlock_t queue_lock;
 };
 
-static int blktrans_discard_request(struct request_queue *q,
-				    struct request *req)
-{
-	req->cmd_type = REQ_TYPE_LINUX_BLOCK;
-	req->cmd[0] = REQ_LB_OP_DISCARD;
-	return 0;
-}
-
 static int do_blktrans_request(struct mtd_blktrans_ops *tr,
 			       struct mtd_blktrans_dev *dev,
 			       struct request *req)
@@ -52,10 +44,6 @@
 
 	buf = req->buffer;
 
-	if (req->cmd_type == REQ_TYPE_LINUX_BLOCK &&
-	    req->cmd[0] == REQ_LB_OP_DISCARD)
-		return tr->discard(dev, block, nsect);
-
 	if (!blk_fs_request(req))
 		return -EIO;
 
@@ -63,6 +51,9 @@
 	    get_capacity(req->rq_disk))
 		return -EIO;
 
+	if (blk_discard_rq(req))
+		return tr->discard(dev, block, nsect);
+
 	switch(rq_data_dir(req)) {
 	case READ:
 		for (; nsect > 0; nsect--, block++, buf += tr->blksize)
@@ -380,8 +371,8 @@
 	tr->blkcore_priv->rq->queuedata = tr;
 	blk_queue_logical_block_size(tr->blkcore_priv->rq, tr->blksize);
 	if (tr->discard)
-		blk_queue_set_discard(tr->blkcore_priv->rq,
-				      blktrans_discard_request);
+		queue_flag_set_unlocked(QUEUE_FLAG_DISCARD,
+					tr->blkcore_priv->rq);
 
 	tr->blkshift = ffs(tr->blksize) - 1;
 
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c
index 975e25b..32031ea 100644
--- a/drivers/net/3c59x.c
+++ b/drivers/net/3c59x.c
@@ -2560,7 +2560,7 @@
 		struct sk_buff *skb;
 		entry = vp->dirty_rx % RX_RING_SIZE;
 		if (vp->rx_skbuff[entry] == NULL) {
-			skb = netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
 			if (skb == NULL) {
 				static unsigned long last_jif;
 				if (time_after(jiffies, last_jif + 10 * HZ)) {
@@ -2572,7 +2572,6 @@
 				break;			/* Bad news!  */
 			}
 
-			skb_reserve(skb, NET_IP_ALIGN);
 			vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
 			vp->rx_skbuff[entry] = skb;
 		}
diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c
index 83a1922..ab451bb 100644
--- a/drivers/net/8139cp.c
+++ b/drivers/net/8139cp.c
@@ -549,14 +549,12 @@
 			pr_debug("%s: rx slot %d status 0x%x len %d\n",
 			       dev->name, rx_tail, status, len);
 
-		new_skb = netdev_alloc_skb(dev, buflen + NET_IP_ALIGN);
+		new_skb = netdev_alloc_skb_ip_align(dev, buflen);
 		if (!new_skb) {
 			dev->stats.rx_dropped++;
 			goto rx_next;
 		}
 
-		skb_reserve(new_skb, NET_IP_ALIGN);
-
 		dma_unmap_single(&cp->pdev->dev, mapping,
 				 buflen, PCI_DMA_FROMDEVICE);
 
@@ -1057,12 +1055,10 @@
 		struct sk_buff *skb;
 		dma_addr_t mapping;
 
-		skb = netdev_alloc_skb(dev, cp->rx_buf_sz + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, cp->rx_buf_sz);
 		if (!skb)
 			goto err_out;
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		mapping = dma_map_single(&cp->pdev->dev, skb->data,
 					 cp->rx_buf_sz, PCI_DMA_FROMDEVICE);
 		cp->rx_skb[i] = skb;
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c
index 4a36287..7e333f7 100644
--- a/drivers/net/8139too.c
+++ b/drivers/net/8139too.c
@@ -2004,9 +2004,8 @@
 		/* Malloc up new buffer, compatible with net-2e. */
 		/* Omit the four octet CRC from the length. */
 
-		skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (likely(skb)) {
-			skb_reserve (skb, NET_IP_ALIGN);	/* 16 byte align the IP fields. */
 #if RX_BUF_IDX == 3
 			wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
 #else
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e19ca4b..e012c2e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1001,7 +1001,7 @@
 
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH || BLACKFIN
+	depends on ARM || SUPERH || BLACKFIN || MIPS
 	select CRC32
 	select MII
 	select PHYLIB
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 2a7b774..0073d19 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -35,11 +35,13 @@
 
 #include <mach/regs-switch.h>
 #include <mach/regs-misc.h>
+#include <asm/mach/irq.h>
+#include <mach/regs-irq.h>
 
 #include "ks8695net.h"
 
 #define MODULENAME	"ks8695_ether"
-#define MODULEVERSION	"1.01"
+#define MODULEVERSION	"1.02"
 
 /*
  * Transmit and device reset timeout, default 5 seconds.
@@ -95,6 +97,9 @@
 #define MAX_RX_DESC 16
 #define MAX_RX_DESC_MASK 0xf
 
+/*napi_weight have better more than rx DMA buffers*/
+#define NAPI_WEIGHT   64
+
 #define MAX_RXBUF_SIZE 0x700
 
 #define TX_RING_DMA_SIZE (sizeof(struct tx_ring_desc) * MAX_TX_DESC)
@@ -120,6 +125,7 @@
  *	@dev: The platform device object for this interface
  *	@dtype: The type of this device
  *	@io_regs: The ioremapped registers for this interface
+ *      @napi : Add support NAPI for Rx
  *	@rx_irq_name: The textual name of the RX IRQ from the platform data
  *	@tx_irq_name: The textual name of the TX IRQ from the platform data
  *	@link_irq_name: The textual name of the link IRQ from the
@@ -143,6 +149,7 @@
  *	@rx_ring_dma: The DMA mapped equivalent of rx_ring
  *	@rx_buffers: The sk_buff mappings for the RX ring
  *	@next_rx_desc_read: The next RX descriptor to read from on IRQ
+ *      @rx_lock: A lock to protect Rx irq function
  *	@msg_enable: The flags for which messages to emit
  */
 struct ks8695_priv {
@@ -152,6 +159,8 @@
 	enum ks8695_dtype dtype;
 	void __iomem *io_regs;
 
+	struct napi_struct	napi;
+
 	const char *rx_irq_name, *tx_irq_name, *link_irq_name;
 	int rx_irq, tx_irq, link_irq;
 
@@ -172,6 +181,7 @@
 	dma_addr_t rx_ring_dma;
 	struct ks8695_skbuff rx_buffers[MAX_RX_DESC];
 	int next_rx_desc_read;
+	spinlock_t rx_lock;
 
 	int msg_enable;
 };
@@ -392,29 +402,82 @@
 }
 
 /**
+ *	ks8695_get_rx_enable_bit - Get rx interrupt enable/status bit
+ *	@ksp: Private data for the KS8695 Ethernet
+ *
+ *    For KS8695 document:
+ *    Interrupt Enable Register (offset 0xE204)
+ *        Bit29 : WAN MAC Receive Interrupt Enable
+ *        Bit16 : LAN MAC Receive Interrupt Enable
+ *    Interrupt Status Register (Offset 0xF208)
+ *        Bit29: WAN MAC Receive Status
+ *        Bit16: LAN MAC Receive Status
+ *    So, this Rx interrrupt enable/status bit number is equal
+ *    as Rx IRQ number.
+ */
+static inline u32 ks8695_get_rx_enable_bit(struct ks8695_priv *ksp)
+{
+	return ksp->rx_irq;
+}
+
+/**
  *	ks8695_rx_irq - Receive IRQ handler
  *	@irq: The IRQ which went off (ignored)
  *	@dev_id: The net_device for the interrupt
  *
- *	Process the RX ring, passing any received packets up to the
- *	host.  If we received anything other than errors, we then
- *	refill the ring.
+ *	Inform NAPI that packet reception needs to be scheduled
  */
+
 static irqreturn_t
 ks8695_rx_irq(int irq, void *dev_id)
 {
 	struct net_device *ndev = (struct net_device *)dev_id;
 	struct ks8695_priv *ksp = netdev_priv(ndev);
+	unsigned long status;
+
+	unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
+
+	spin_lock(&ksp->rx_lock);
+
+	status = readl(KS8695_IRQ_VA + KS8695_INTST);
+
+	/*clean rx status bit*/
+	writel(status | mask_bit , KS8695_IRQ_VA + KS8695_INTST);
+
+	if (status & mask_bit) {
+		if (napi_schedule_prep(&ksp->napi)) {
+			/*disable rx interrupt*/
+			status &= ~mask_bit;
+			writel(status , KS8695_IRQ_VA + KS8695_INTEN);
+			__napi_schedule(&ksp->napi);
+		}
+	}
+
+	spin_unlock(&ksp->rx_lock);
+	return IRQ_HANDLED;
+}
+
+/**
+ *	ks8695_rx - Receive packets  called by NAPI poll method
+ *	@ksp: Private data for the KS8695 Ethernet
+ *	@budget: The max packets would be receive
+ */
+
+static int ks8695_rx(struct ks8695_priv *ksp, int budget)
+{
+	struct net_device *ndev = ksp->ndev;
 	struct sk_buff *skb;
 	int buff_n;
 	u32 flags;
 	int pktlen;
 	int last_rx_processed = -1;
+	int received = 0;
 
 	buff_n = ksp->next_rx_desc_read;
-	do {
-		if (ksp->rx_buffers[buff_n].skb &&
-		    !(ksp->rx_ring[buff_n].status & cpu_to_le32(RDES_OWN))) {
+	while (received < budget
+			&& ksp->rx_buffers[buff_n].skb
+			&& (!(ksp->rx_ring[buff_n].status &
+					cpu_to_le32(RDES_OWN)))) {
 			rmb();
 			flags = le32_to_cpu(ksp->rx_ring[buff_n].status);
 			/* Found an SKB which we own, this means we
@@ -464,7 +527,7 @@
 			/* Relinquish the SKB to the network layer */
 			skb_put(skb, pktlen);
 			skb->protocol = eth_type_trans(skb, ndev);
-			netif_rx(skb);
+			netif_receive_skb(skb);
 
 			/* Record stats */
 			ndev->stats.rx_packets++;
@@ -478,29 +541,56 @@
 			/* Give the ring entry back to the hardware */
 			ksp->rx_ring[buff_n].status = cpu_to_le32(RDES_OWN);
 rx_finished:
+			received++;
 			/* And note this as processed so we can start
 			 * from here next time
 			 */
 			last_rx_processed = buff_n;
-		} else {
-			/* Ran out of things to process, stop now */
-			break;
-		}
-		buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
-	} while (buff_n != ksp->next_rx_desc_read);
+			buff_n = (buff_n + 1) & MAX_RX_DESC_MASK;
+			/*And note which RX descriptor we last did */
+			if (likely(last_rx_processed != -1))
+				ksp->next_rx_desc_read =
+					(last_rx_processed + 1) &
+					MAX_RX_DESC_MASK;
 
-	/* And note which RX descriptor we last did anything with */
-	if (likely(last_rx_processed != -1))
-		ksp->next_rx_desc_read =
-			(last_rx_processed + 1) & MAX_RX_DESC_MASK;
+			/* And refill the buffers */
+			ks8695_refill_rxbuffers(ksp);
 
-	/* And refill the buffers */
-	ks8695_refill_rxbuffers(ksp);
+			/* Kick the RX DMA engine, in case it became
+			 *  suspended */
+			ks8695_writereg(ksp, KS8695_DRSC, 0);
+	}
+	return received;
+}
 
-	/* Kick the RX DMA engine, in case it became suspended */
-	ks8695_writereg(ksp, KS8695_DRSC, 0);
 
-	return IRQ_HANDLED;
+/**
+ *	ks8695_poll - Receive packet by NAPI poll method
+ *	@ksp: Private data for the KS8695 Ethernet
+ *	@budget: The remaining number packets for network subsystem
+ *
+ *     Invoked by the network core when it requests for new
+ *     packets from the driver
+ */
+static int ks8695_poll(struct napi_struct *napi, int budget)
+{
+	struct ks8695_priv *ksp = container_of(napi, struct ks8695_priv, napi);
+	unsigned long  work_done;
+
+	unsigned long isr = readl(KS8695_IRQ_VA + KS8695_INTEN);
+	unsigned long mask_bit = 1 << ks8695_get_rx_enable_bit(ksp);
+
+	work_done = ks8695_rx(ksp, budget);
+
+	if (work_done < budget) {
+		unsigned long flags;
+		spin_lock_irqsave(&ksp->rx_lock, flags);
+		/*enable rx interrupt*/
+		writel(isr | mask_bit, KS8695_IRQ_VA + KS8695_INTEN);
+		__napi_complete(napi);
+		spin_unlock_irqrestore(&ksp->rx_lock, flags);
+	}
+	return work_done;
 }
 
 /**
@@ -1253,6 +1343,7 @@
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 
 	netif_stop_queue(ndev);
+	napi_disable(&ksp->napi);
 	netif_carrier_off(ndev);
 
 	ks8695_shutdown(ksp);
@@ -1287,6 +1378,7 @@
 		return ret;
 	}
 
+	napi_enable(&ksp->napi);
 	netif_start_queue(ndev);
 
 	return 0;
@@ -1472,6 +1564,8 @@
 	SET_ETHTOOL_OPS(ndev, &ks8695_ethtool_ops);
 	ndev->watchdog_timeo	 = msecs_to_jiffies(watchdog);
 
+	netif_napi_add(ndev, &ksp->napi, ks8695_poll, NAPI_WEIGHT);
+
 	/* Retrieve the default MAC addr from the chip. */
 	/* The bootloader should have left it in there for us. */
 
@@ -1505,6 +1599,7 @@
 
 	/* And initialise the queue's lock */
 	spin_lock_init(&ksp->txq_lock);
+	spin_lock_init(&ksp->rx_lock);
 
 	/* Specify the RX DMA ring buffer */
 	ksp->rx_ring = ksp->ring_base + TX_RING_DMA_SIZE;
@@ -1626,6 +1721,7 @@
 	struct ks8695_priv *ksp = netdev_priv(ndev);
 
 	platform_set_drvdata(pdev, NULL);
+	netif_napi_del(&ksp->napi);
 
 	unregister_netdev(ndev);
 	ks8695_release_device(ksp);
diff --git a/drivers/net/atl1c/atl1c_main.c b/drivers/net/atl1c/atl1c_main.c
index 1372e9a9..3b8801a 100644
--- a/drivers/net/atl1c/atl1c_main.c
+++ b/drivers/net/atl1c/atl1c_main.c
@@ -1981,8 +1981,6 @@
 		else {
 			use_tpd = atl1c_get_tpd(adapter, type);
 			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
-			use_tpd = atl1c_get_tpd(adapter, type);
-			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
 		}
 		buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
 		buffer_info->length = buf_len - mapped_len;
diff --git a/drivers/net/atl1e/atl1e_main.c b/drivers/net/atl1e/atl1e_main.c
index 955da73..8b889ab 100644
--- a/drivers/net/atl1e/atl1e_main.c
+++ b/drivers/net/atl1e/atl1e_main.c
@@ -1433,14 +1433,12 @@
 
 			packet_size = ((prrs->word1 >> RRS_PKT_SIZE_SHIFT) &
 					RRS_PKT_SIZE_MASK) - 4; /* CRC */
-			skb = netdev_alloc_skb(netdev,
-					       packet_size + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, packet_size);
 			if (skb == NULL) {
 				dev_warn(&pdev->dev, "%s: Memory squeeze,"
 					"deferring packet.\n", netdev->name);
 				goto skip_pkt;
 			}
-			skb_reserve(skb, NET_IP_ALIGN);
 			skb->dev = netdev;
 			memcpy(skb->data, (u8 *)(prrs + 1), packet_size);
 			skb_put(skb, packet_size);
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 00569dc..963df50 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1864,21 +1864,14 @@
 
 		rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);
 
-		skb = netdev_alloc_skb(adapter->netdev,
-				       adapter->rx_buffer_len + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(adapter->netdev,
+						adapter->rx_buffer_len);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->netdev->stats.rx_dropped++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->alloced = 1;
 		buffer_info->skb = skb;
 		buffer_info->length = (u16) adapter->rx_buffer_len;
diff --git a/drivers/net/atlx/atl2.c b/drivers/net/atlx/atl2.c
index ab68886..0d26807 100644
--- a/drivers/net/atlx/atl2.c
+++ b/drivers/net/atlx/atl2.c
@@ -409,7 +409,7 @@
 		if (rxd->status.ok && rxd->status.pkt_size >= 60) {
 			int rx_size = (int)(rxd->status.pkt_size - 4);
 			/* alloc new buffer */
-			skb = netdev_alloc_skb(netdev, rx_size + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, rx_size);
 			if (NULL == skb) {
 				printk(KERN_WARNING
 					"%s: Mem squeeze, deferring packet.\n",
@@ -421,7 +421,6 @@
 				netdev->stats.rx_dropped++;
 				break;
 			}
-			skb_reserve(skb, NET_IP_ALIGN);
 			skb->dev = netdev;
 			memcpy(skb->data, rxd->packet, rx_size);
 			skb_put(skb, rx_size);
diff --git a/drivers/net/bcm63xx_enet.c b/drivers/net/bcm63xx_enet.c
index ba29dc3..1f6c548 100644
--- a/drivers/net/bcm63xx_enet.c
+++ b/drivers/net/bcm63xx_enet.c
@@ -320,16 +320,13 @@
 		if (len < copybreak) {
 			struct sk_buff *nskb;
 
-			nskb = netdev_alloc_skb(dev, len + NET_IP_ALIGN);
+			nskb = netdev_alloc_skb_ip_align(dev, len);
 			if (!nskb) {
 				/* forget packet, just rearm desc */
 				priv->stats.rx_dropped++;
 				continue;
 			}
 
-			/* since we're copying the data, we can align
-			 * them properly */
-			skb_reserve(nskb, NET_IP_ALIGN);
 			dma_sync_single_for_cpu(kdev, desc->address,
 						len, DMA_FROM_DEVICE);
 			memcpy(nskb->data, skb->data, len);
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index a80da0e..ce75631 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -35,20 +35,31 @@
 #define DRV_VER			"2.101.205"
 #define DRV_NAME		"be2net"
 #define BE_NAME			"ServerEngines BladeEngine2 10Gbps NIC"
+#define BE3_NAME		"ServerEngines BladeEngine3 10Gbps NIC"
 #define OC_NAME			"Emulex OneConnect 10Gbps NIC"
+#define OC_NAME1		"Emulex OneConnect 10Gbps NIC (be3)"
 #define DRV_DESC		BE_NAME "Driver"
 
 #define BE_VENDOR_ID 		0x19a2
 #define BE_DEVICE_ID1		0x211
+#define BE_DEVICE_ID2		0x221
 #define OC_DEVICE_ID1		0x700
 #define OC_DEVICE_ID2		0x701
+#define OC_DEVICE_ID3		0x710
 
 static inline char *nic_name(struct pci_dev *pdev)
 {
-	if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+	switch (pdev->device) {
+	case OC_DEVICE_ID1:
+	case OC_DEVICE_ID2:
 		return OC_NAME;
-	else
+	case OC_DEVICE_ID3:
+		return OC_NAME1;
+	case BE_DEVICE_ID2:
+		return BE3_NAME;
+	default:
 		return BE_NAME;
+	}
 }
 
 /* Number of bytes of an RX frame that are copied to skb->data */
@@ -181,7 +192,6 @@
 
 struct be_stats_obj {
 	struct be_drvr_stats drvr_stats;
-	struct net_device_stats net_stats;
 	struct be_dma_mem cmd;
 };
 
diff --git a/drivers/net/benet/be_cmds.c b/drivers/net/benet/be_cmds.c
index 28a0eda..cc75dd0 100644
--- a/drivers/net/benet/be_cmds.c
+++ b/drivers/net/benet/be_cmds.c
@@ -834,7 +834,7 @@
 
 /* Uses synchronous mcc */
 int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up)
+			bool *link_up, u8 *mac_speed, u16 *link_speed)
 {
 	struct be_mcc_wrb *wrb;
 	struct be_cmd_req_link_status *req;
@@ -855,8 +855,11 @@
 	status = be_mcc_notify_wait(adapter);
 	if (!status) {
 		struct be_cmd_resp_link_status *resp = embedded_payload(wrb);
-		if (resp->mac_speed != PHY_LINK_SPEED_ZERO)
+		if (resp->mac_speed != PHY_LINK_SPEED_ZERO) {
 			*link_up = true;
+			*link_speed = le16_to_cpu(resp->link_speed);
+			*mac_speed = resp->mac_speed;
+		}
 	}
 
 	spin_unlock_bh(&adapter->mcc_lock);
@@ -1129,6 +1132,95 @@
 	return status;
 }
 
+/* Uses sync mcc */
+int be_cmd_set_beacon_state(struct be_adapter *adapter, u8 port_num,
+			u8 bcn, u8 sts, u8 state)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_enable_disable_beacon *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_ENABLE_DISABLE_BEACON, sizeof(*req));
+
+	req->port_num = port_num;
+	req->beacon_state = state;
+	req->beacon_duration = bcn;
+	req->status_duration = sts;
+
+	status = be_mcc_notify_wait(adapter);
+
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+/* Uses sync mcc */
+int be_cmd_get_beacon_state(struct be_adapter *adapter, u8 port_num, u32 *state)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_get_beacon_state *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_GET_BEACON_STATE, sizeof(*req));
+
+	req->port_num = port_num;
+
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_get_beacon_state *resp =
+						embedded_payload(wrb);
+		*state = resp->beacon_state;
+	}
+
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
+/* Uses sync mcc */
+int be_cmd_read_port_type(struct be_adapter *adapter, u32 port,
+				u8 *connector)
+{
+	struct be_mcc_wrb *wrb;
+	struct be_cmd_req_port_type *req;
+	int status;
+
+	spin_lock_bh(&adapter->mcc_lock);
+
+	wrb = wrb_from_mccq(adapter);
+	req = embedded_payload(wrb);
+
+	be_wrb_hdr_prepare(wrb, sizeof(struct be_cmd_resp_port_type), true, 0);
+
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+		OPCODE_COMMON_READ_TRANSRECV_DATA, sizeof(*req));
+
+	req->port = cpu_to_le32(port);
+	req->page_num = cpu_to_le32(TR_PAGE_A0);
+	status = be_mcc_notify_wait(adapter);
+	if (!status) {
+		struct be_cmd_resp_port_type *resp = embedded_payload(wrb);
+			*connector = resp->data.connector;
+	}
+
+	spin_unlock_bh(&adapter->mcc_lock);
+	return status;
+}
+
 int be_cmd_write_flashrom(struct be_adapter *adapter, struct be_dma_mem *cmd,
 			u32 flash_type, u32 flash_opcode, u32 buf_size)
 {
diff --git a/drivers/net/benet/be_cmds.h b/drivers/net/benet/be_cmds.h
index e5f9676..69dc017 100644
--- a/drivers/net/benet/be_cmds.h
+++ b/drivers/net/benet/be_cmds.h
@@ -138,6 +138,9 @@
 #define OPCODE_COMMON_NTWK_PMAC_ADD			59
 #define OPCODE_COMMON_NTWK_PMAC_DEL			60
 #define OPCODE_COMMON_FUNCTION_RESET			61
+#define OPCODE_COMMON_ENABLE_DISABLE_BEACON		69
+#define OPCODE_COMMON_GET_BEACON_STATE			70
+#define OPCODE_COMMON_READ_TRANSRECV_DATA		73
 
 #define OPCODE_ETH_ACPI_CONFIG				2
 #define OPCODE_ETH_PROMISCUOUS				3
@@ -633,9 +636,47 @@
 	u8 mac_fault;
 	u8 mgmt_mac_duplex;
 	u8 mgmt_mac_speed;
-	u16 rsvd0;
+	u16 link_speed;
+	u32 rsvd0;
 } __packed;
 
+/******************** Port Identification ***************************/
+/*    Identifies the type of port attached to NIC     */
+struct be_cmd_req_port_type {
+	struct be_cmd_req_hdr hdr;
+	u32 page_num;
+	u32 port;
+};
+
+enum {
+	TR_PAGE_A0 = 0xa0,
+	TR_PAGE_A2 = 0xa2
+};
+
+struct be_cmd_resp_port_type {
+	struct be_cmd_resp_hdr hdr;
+	u32 page_num;
+	u32 port;
+	struct data {
+		u8 identifier;
+		u8 identifier_ext;
+		u8 connector;
+		u8 transceiver[8];
+		u8 rsvd0[3];
+		u8 length_km;
+		u8 length_hm;
+		u8 length_om1;
+		u8 length_om2;
+		u8 length_cu;
+		u8 length_cu_m;
+		u8 vendor_name[16];
+		u8 rsvd;
+		u8 vendor_oui[3];
+		u8 vendor_pn[16];
+		u8 vendor_rev[4];
+	} data;
+};
+
 /******************** Get FW Version *******************/
 struct be_cmd_req_get_fw_version {
 	struct be_cmd_req_hdr hdr;
@@ -699,6 +740,37 @@
 	u32 rsvd[26];
 };
 
+/******************** Port Beacon ***************************/
+
+#define BEACON_STATE_ENABLED		0x1
+#define BEACON_STATE_DISABLED		0x0
+
+struct be_cmd_req_enable_disable_beacon {
+	struct be_cmd_req_hdr hdr;
+	u8  port_num;
+	u8  beacon_state;
+	u8  beacon_duration;
+	u8  status_duration;
+} __packed;
+
+struct be_cmd_resp_enable_disable_beacon {
+	struct be_cmd_resp_hdr resp_hdr;
+	u32 rsvd0;
+} __packed;
+
+struct be_cmd_req_get_beacon_state {
+	struct be_cmd_req_hdr hdr;
+	u8  port_num;
+	u8  rsvd0;
+	u16 rsvd1;
+} __packed;
+
+struct be_cmd_resp_get_beacon_state {
+	struct be_cmd_resp_hdr resp_hdr;
+	u8 beacon_state;
+	u8 rsvd0[3];
+} __packed;
+
 /****************** Firmware Flash ******************/
 struct flashrom_params {
 	u32 op_code;
@@ -743,7 +815,7 @@
 extern int be_cmd_q_destroy(struct be_adapter *adapter, struct be_queue_info *q,
 			int type);
 extern int be_cmd_link_status_query(struct be_adapter *adapter,
-			bool *link_up);
+			bool *link_up, u8 *mac_speed, u16 *link_speed);
 extern int be_cmd_reset(struct be_adapter *adapter);
 extern int be_cmd_get_stats(struct be_adapter *adapter,
 			struct be_dma_mem *nonemb_cmd);
@@ -765,6 +837,12 @@
 			u32 *port_num, u32 *cap);
 extern int be_cmd_reset_function(struct be_adapter *adapter);
 extern int be_process_mcc(struct be_adapter *adapter);
+extern int be_cmd_set_beacon_state(struct be_adapter *adapter,
+			u8 port_num, u8 beacon, u8 status, u8 state);
+extern int be_cmd_get_beacon_state(struct be_adapter *adapter,
+			u8 port_num, u32 *state);
+extern int be_cmd_read_port_type(struct be_adapter *adapter, u32 port,
+					u8 *connector);
 extern int be_cmd_write_flashrom(struct be_adapter *adapter,
 			struct be_dma_mem *cmd, u32 flash_oper,
 			u32 flash_opcode, u32 buf_size);
diff --git a/drivers/net/benet/be_ethtool.c b/drivers/net/benet/be_ethtool.c
index cda5bf2..edebce9 100644
--- a/drivers/net/benet/be_ethtool.c
+++ b/drivers/net/benet/be_ethtool.c
@@ -234,7 +234,7 @@
 	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
-	struct net_device_stats *net_stats = &adapter->stats.net_stats;
+	struct net_device_stats *net_stats = &netdev->stats;
 	struct be_erx_stats *erx_stats = &hw_stats->erx;
 	void *p = NULL;
 	int i;
@@ -281,16 +281,55 @@
 	}
 }
 
-static int be_get_stats_count(struct net_device *netdev)
+static int be_get_sset_count(struct net_device *netdev, int stringset)
 {
-	return ETHTOOL_STATS_NUM;
+	switch (stringset) {
+	case ETH_SS_STATS:
+		return ETHTOOL_STATS_NUM;
+	default:
+		return -EINVAL;
+	}
 }
 
 static int be_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	ecmd->speed = SPEED_10000;
+	struct be_adapter *adapter = netdev_priv(netdev);
+	u8 mac_speed = 0, connector = 0;
+	u16 link_speed = 0;
+	bool link_up = false;
+
+	be_cmd_link_status_query(adapter, &link_up, &mac_speed, &link_speed);
+
+	/* link_speed is in units of 10 Mbps */
+	if (link_speed) {
+		ecmd->speed = link_speed*10;
+	} else {
+		switch (mac_speed) {
+		case PHY_LINK_SPEED_1GBPS:
+			ecmd->speed = SPEED_1000;
+			break;
+		case PHY_LINK_SPEED_10GBPS:
+			ecmd->speed = SPEED_10000;
+			break;
+		}
+	}
 	ecmd->duplex = DUPLEX_FULL;
 	ecmd->autoneg = AUTONEG_DISABLE;
+	ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_TP);
+
+	be_cmd_read_port_type(adapter, adapter->port_num, &connector);
+	switch (connector) {
+	case 7:
+		ecmd->port = PORT_FIBRE;
+		break;
+	default:
+		ecmd->port = PORT_TP;
+		break;
+	}
+
+	ecmd->phy_address = adapter->port_num;
+	ecmd->transceiver = XCVR_INTERNAL;
+
 	return 0;
 }
 
@@ -333,6 +372,35 @@
 }
 
 static int
+be_phys_id(struct net_device *netdev, u32 data)
+{
+	struct be_adapter *adapter = netdev_priv(netdev);
+	int status;
+	u32 cur;
+
+	if (!netif_running(netdev))
+		return 0;
+
+	be_cmd_get_beacon_state(adapter, adapter->port_num, &cur);
+
+	if (cur == BEACON_STATE_ENABLED)
+		return 0;
+
+	if (data < 2)
+		data = 2;
+
+	status = be_cmd_set_beacon_state(adapter, adapter->port_num, 0, 0,
+			BEACON_STATE_ENABLED);
+	set_current_state(TASK_INTERRUPTIBLE);
+	schedule_timeout(data*HZ);
+
+	status = be_cmd_set_beacon_state(adapter, adapter->port_num, 0, 0,
+			BEACON_STATE_DISABLED);
+
+	return status;
+}
+
+static int
 be_do_flash(struct net_device *netdev, struct ethtool_flash *efl)
 {
 	struct be_adapter *adapter = netdev_priv(netdev);
@@ -364,7 +432,8 @@
 	.get_tso = ethtool_op_get_tso,
 	.set_tso = ethtool_op_set_tso,
 	.get_strings = be_get_stat_strings,
-	.get_stats_count = be_get_stats_count,
+	.phys_id = be_phys_id,
+	.get_sset_count = be_get_sset_count,
 	.get_ethtool_stats = be_get_ethtool_stats,
 	.flash_device = be_do_flash,
 };
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 1f941f0..43180dc 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -31,8 +31,10 @@
 
 static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
 	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+	{ PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID2) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
 	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
+	{ PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID3) },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -141,7 +143,7 @@
 	struct be_rxf_stats *rxf_stats = &hw_stats->rxf;
 	struct be_port_rxf_stats *port_stats =
 			&rxf_stats->port[adapter->port_num];
-	struct net_device_stats *dev_stats = &adapter->stats.net_stats;
+	struct net_device_stats *dev_stats = &adapter->netdev->stats;
 	struct be_erx_stats *erx_stats = &hw_stats->erx;
 
 	dev_stats->rx_packets = port_stats->rx_total_frames;
@@ -269,9 +271,7 @@
 
 static struct net_device_stats *be_get_stats(struct net_device *dev)
 {
-	struct be_adapter *adapter = netdev_priv(dev);
-
-	return &adapter->stats.net_stats;
+	return &dev->stats;
 }
 
 static u32 be_calc_rate(u64 bytes, unsigned long ticks)
@@ -758,7 +758,7 @@
 	if ((adapter->cap == 0x400) && !vtm)
 		vlanf = 0;
 
-	skb = netdev_alloc_skb(adapter->netdev, BE_HDR_LEN + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(adapter->netdev, BE_HDR_LEN);
 	if (!skb) {
 		if (net_ratelimit())
 			dev_warn(&adapter->pdev->dev, "skb alloc failed\n");
@@ -766,8 +766,6 @@
 		return;
 	}
 
-	skb_reserve(skb, NET_IP_ALIGN);
-
 	skb_fill_rx_data(adapter, skb, rxcp);
 
 	if (do_pkt_csum(rxcp, adapter->rx_csum))
@@ -1590,6 +1588,8 @@
 	struct be_eq_obj *tx_eq = &adapter->tx_eq;
 	bool link_up;
 	int status;
+	u8 mac_speed;
+	u16 link_speed;
 
 	/* First time posting */
 	be_post_rx_frags(adapter);
@@ -1608,7 +1608,8 @@
 	/* Rx compl queue may be in unarmed state; rearm it */
 	be_cq_notify(adapter, adapter->rx_obj.cq.id, true, 0);
 
-	status = be_cmd_link_status_query(adapter, &link_up);
+	status = be_cmd_link_status_query(adapter, &link_up, &mac_speed,
+			&link_speed);
 	if (status)
 		return status;
 	be_link_status_update(adapter, link_up);
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 08cddb6..539d23b 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -1466,6 +1466,8 @@
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr |= BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED) {
@@ -1500,6 +1502,8 @@
 	} else if (CHIP_NUM(bp) == CHIP_NUM_5708) {
 		bnx2_read_phy(bp, bp->mii_bmcr, &bmcr);
 		bmcr &= ~BCM5708S_BMCR_FORCE_2500;
+	} else {
+		return;
 	}
 
 	if (bp->autoneg & AUTONEG_SPEED)
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index bbf8422..c3b32f7 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -24,6 +24,10 @@
 #define BCM_VLAN			1
 #endif
 
+#if defined(CONFIG_CNIC) || defined(CONFIG_CNIC_MODULE)
+#define BCM_CNIC 1
+#include "cnic_if.h"
+#endif
 
 #define BNX2X_MULTI_QUEUE
 
@@ -762,7 +766,11 @@
 			(offsetof(struct bnx2x_eth_stats, stat_name) / 4)
 
 
+#ifdef BCM_CNIC
+#define MAX_CONTEXT			15
+#else
 #define MAX_CONTEXT			16
+#endif
 
 union cdu_context {
 	struct eth_context eth;
@@ -811,13 +819,21 @@
 	struct bnx2x_fastpath	fp[MAX_CONTEXT];
 	void __iomem		*regview;
 	void __iomem		*doorbells;
+#ifdef BCM_CNIC
+#define BNX2X_DB_SIZE		(18*BCM_PAGE_SIZE)
+#else
 #define BNX2X_DB_SIZE		(16*BCM_PAGE_SIZE)
+#endif
 
 	struct net_device	*dev;
 	struct pci_dev		*pdev;
 
 	atomic_t		intr_sem;
+#ifdef BCM_CNIC
+	struct msix_entry	msix_table[MAX_CONTEXT+2];
+#else
 	struct msix_entry	msix_table[MAX_CONTEXT+1];
+#endif
 #define INT_MODE_INTx			1
 #define INT_MODE_MSI			2
 #define INT_MODE_MSIX			3
@@ -863,8 +879,8 @@
 
 	/* Flags for marking that there is a STAT_QUERY or
 	   SET_MAC ramrod pending */
-	u8			stats_pending;
-	u8			set_mac_pending;
+	int			stats_pending;
+	int			set_mac_pending;
 
 	/* End of fields used in the performance code paths */
 
@@ -884,6 +900,7 @@
 #define BP_NOMCP(bp)			(bp->flags & NO_MCP_FLAG)
 #define HW_VLAN_TX_FLAG			0x400
 #define HW_VLAN_RX_FLAG			0x800
+#define MF_FUNC_DIS			0x1000
 
 	int			func;
 #define BP_PORT(bp)			(bp->func % PORT_MAX)
@@ -891,6 +908,11 @@
 #define BP_E1HVN(bp)			(bp->func >> 1)
 #define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
 
+#ifdef BCM_CNIC
+#define BCM_CNIC_CID_START		16
+#define BCM_ISCSI_ETH_CL_ID		17
+#endif
+
 	int			pm_cap;
 	int			pcie_cap;
 	int			mrrs;
@@ -944,7 +966,6 @@
 #define BNX2X_STATE_CLOSING_WAIT4_HALT	0x4000
 #define BNX2X_STATE_CLOSING_WAIT4_DELETE 0x5000
 #define BNX2X_STATE_CLOSING_WAIT4_UNLOAD 0x6000
-#define BNX2X_STATE_DISABLED		0xd000
 #define BNX2X_STATE_DIAG		0xe000
 #define BNX2X_STATE_ERROR		0xf000
 
@@ -960,28 +981,51 @@
 #define BNX2X_MAX_MULTICAST		64
 #define BNX2X_MAX_EMUL_MULTI		16
 
+	u32 			rx_mode_cl_mask;
+
 	dma_addr_t		def_status_blk_mapping;
 
 	struct bnx2x_slowpath	*slowpath;
 	dma_addr_t		slowpath_mapping;
 
-#ifdef BCM_ISCSI
-	void    		*t1;
-	dma_addr_t      	t1_mapping;
-	void    		*t2;
-	dma_addr_t      	t2_mapping;
-	void    		*timers;
-	dma_addr_t      	timers_mapping;
-	void    		*qm;
-	dma_addr_t      	qm_mapping;
-#endif
-
 	int			dropless_fc;
 
+#ifdef BCM_CNIC
+	u32			cnic_flags;
+#define BNX2X_CNIC_FLAG_MAC_SET		1
+
+	void			*t1;
+	dma_addr_t		t1_mapping;
+	void			*t2;
+	dma_addr_t		t2_mapping;
+	void			*timers;
+	dma_addr_t		timers_mapping;
+	void			*qm;
+	dma_addr_t		qm_mapping;
+	struct cnic_ops		*cnic_ops;
+	void			*cnic_data;
+	u32			cnic_tag;
+	struct cnic_eth_dev	cnic_eth_dev;
+	struct host_status_block *cnic_sb;
+	dma_addr_t		cnic_sb_mapping;
+#define CNIC_SB_ID(bp)			BP_L_ID(bp)
+	struct eth_spe		*cnic_kwq;
+	struct eth_spe		*cnic_kwq_prod;
+	struct eth_spe		*cnic_kwq_cons;
+	struct eth_spe		*cnic_kwq_last;
+	u16			cnic_kwq_pending;
+	u16			cnic_spq_pending;
+	struct mutex		cnic_mutex;
+	u8			iscsi_mac[6];
+#endif
+
 	int			dmae_ready;
 	/* used to synchronize dmae accesses */
 	struct mutex		dmae_mutex;
 
+	/* used to protect the FW mail box */
+	struct mutex		fw_mb_mutex;
+
 	/* used to synchronize stats collecting */
 	int			stats_state;
 	/* used by dmae command loader */
diff --git a/drivers/net/bnx2x_hsi.h b/drivers/net/bnx2x_hsi.h
index 8e2261f..5258533 100644
--- a/drivers/net/bnx2x_hsi.h
+++ b/drivers/net/bnx2x_hsi.h
@@ -7,6 +7,20 @@
  * the Free Software Foundation.
  */
 
+struct license_key {
+	u32 reserved[6];
+
+#if defined(__BIG_ENDIAN)
+	u16 max_iscsi_init_conn;
+	u16 max_iscsi_trgt_conn;
+#elif defined(__LITTLE_ENDIAN)
+	u16 max_iscsi_trgt_conn;
+	u16 max_iscsi_init_conn;
+#endif
+
+	u32 reserved_a[6];
+};
+
 
 #define PORT_0				0
 #define PORT_1				1
@@ -250,6 +264,7 @@
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_SFX7101	    0x00000800
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727	    0x00000900
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727_NOC   0x00000a00
+#define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823	    0x00000b00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE	    0x0000fd00
 #define PORT_HW_CFG_XGXS_EXT_PHY_TYPE_NOT_CONN	    0x0000ff00
 
@@ -881,7 +896,7 @@
 
 	struct shm_dev_info	dev_info;		 /* 0x8     (0x438) */
 
-	u8			reserved[52*PORT_MAX];
+	struct license_key	drv_lic_key[PORT_MAX];	/* 0x440 (52*2=0x68) */
 
 	/* FW information (for internal FW use) */
 	u32			fw_info_fio_offset;    /* 0x4a8       (0x4) */
@@ -1245,8 +1260,8 @@
 
 
 #define BCM_5710_FW_MAJOR_VERSION			5
-#define BCM_5710_FW_MINOR_VERSION			0
-#define BCM_5710_FW_REVISION_VERSION			21
+#define BCM_5710_FW_MINOR_VERSION			2
+#define BCM_5710_FW_REVISION_VERSION			7
 #define BCM_5710_FW_ENGINEERING_VERSION 		0
 #define BCM_5710_FW_COMPILE_FLAGS			1
 
diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c
index e32d337..41b9b7bd 100644
--- a/drivers/net/bnx2x_link.c
+++ b/drivers/net/bnx2x_link.c
@@ -1107,18 +1107,21 @@
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
 			      &control2);
-
-
-	control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
-
-
+	if (params->speed_cap_mask & PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+		control2 |= MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	else
+		control2 &= ~MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN;
+	DP(NETIF_MSG_LINK, "params->speed_cap_mask = 0x%x, control2 = 0x%x\n",
+		params->speed_cap_mask, control2);
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_SERDES_DIGITAL,
 			      MDIO_SERDES_DIGITAL_A_1000X_CONTROL2,
 			      control2);
 
-	if (phy_flags & PHY_XGXS_FLAG) {
+	if ((phy_flags & PHY_XGXS_FLAG) &&
+	     (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)) {
 		DP(NETIF_MSG_LINK, "XGXS\n");
 
 		CL45_WR_OVER_CL22(bp, params->port,
@@ -1225,7 +1228,7 @@
 				      params->phy_addr,
 				      MDIO_REG_BANK_CL73_USERB0,
 				    MDIO_CL73_USERB0_CL73_UCTRL,
-				    MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL);
+				      0xe);
 
 		/* Enable BAM Station Manager*/
 		CL45_WR_OVER_CL22(bp, params->port,
@@ -1236,29 +1239,25 @@
 			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN |
 			MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN);
 
-		/* Merge CL73 and CL37 aneg resolution */
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_CL73_USERB0,
-				      MDIO_CL73_USERB0_CL73_BAM_CTRL3,
-				      &reg_val);
-
-		if (params->speed_cap_mask &
-		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
-			/* Set the CL73 AN speed */
+		/* Advertise CL73 link speeds */
 			CL45_RD_OVER_CL22(bp, params->port,
 					      params->phy_addr,
 					      MDIO_REG_BANK_CL73_IEEEB1,
 					      MDIO_CL73_IEEEB1_AN_ADV2,
 					      &reg_val);
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4;
+		if (params->speed_cap_mask &
+		    PORT_HW_CFG_SPEED_CAPABILITY_D0_1G)
+			reg_val |= MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX;
 
 			CL45_WR_OVER_CL22(bp, params->port,
 					      params->phy_addr,
 					      MDIO_REG_BANK_CL73_IEEEB1,
 					      MDIO_CL73_IEEEB1_AN_ADV2,
-			  reg_val | MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4);
+				      reg_val);
 
-		}
 		/* CL73 Autoneg Enabled */
 		reg_val = MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN;
 
@@ -1351,6 +1350,7 @@
 
 static void bnx2x_calc_ieee_aneg_adv(struct link_params *params, u16 *ieee_fc)
 {
+	struct bnx2x *bp = params->bp;
 	*ieee_fc = MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX;
 	/* resolve pause mode and advertisement
 	 * Please refer to Table 28B-3 of the 802.3ab-1999 spec */
@@ -1380,18 +1380,30 @@
 		*ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE;
 		break;
 	}
+	DP(NETIF_MSG_LINK, "ieee_fc = 0x%x\n", *ieee_fc);
 }
 
 static void bnx2x_set_ieee_aneg_advertisment(struct link_params *params,
 					   u16 ieee_fc)
 {
 	struct bnx2x *bp = params->bp;
+	u16 val;
 	/* for AN, we are always publishing full duplex */
 
 	CL45_WR_OVER_CL22(bp, params->port,
 			      params->phy_addr,
 			      MDIO_REG_BANK_COMBO_IEEE0,
 			      MDIO_COMBO_IEEE0_AUTO_NEG_ADV, ieee_fc);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, &val);
+	val &= ~MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH;
+	val |= ((ieee_fc<<3) & MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK);
+	CL45_WR_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_CL73_IEEEB1,
+			      MDIO_CL73_IEEEB1_AN_ADV1, val);
 }
 
 static void bnx2x_restart_autoneg(struct link_params *params, u8 enable_cl73)
@@ -1609,6 +1621,39 @@
 	return ret;
 }
 
+static u8 bnx2x_direct_parallel_detect_used(struct link_params *params)
+{
+	struct bnx2x *bp = params->bp;
+	u16 pd_10g, status2_1000x;
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_SERDES_DIGITAL,
+			      MDIO_SERDES_DIGITAL_A_1000X_STATUS2,
+			      &status2_1000x);
+	if (status2_1000x & MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED) {
+		DP(NETIF_MSG_LINK, "1G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+
+	CL45_RD_OVER_CL22(bp, params->port,
+			      params->phy_addr,
+			      MDIO_REG_BANK_10G_PARALLEL_DETECT,
+			      MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS,
+			      &pd_10g);
+
+	if (pd_10g & MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK) {
+		DP(NETIF_MSG_LINK, "10G parallel detect link on port %d\n",
+			 params->port);
+		return 1;
+	}
+	return 0;
+}
 
 static void bnx2x_flow_ctrl_resolve(struct link_params *params,
 				  struct link_vars *vars,
@@ -1627,21 +1672,53 @@
 	    (!(vars->phy_flags & PHY_SGMII_FLAG)) &&
 	    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 	     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT)) {
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-				      MDIO_REG_BANK_COMBO_IEEE0,
-				      MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
-				      &ld_pause);
-		CL45_RD_OVER_CL22(bp, params->port,
-				      params->phy_addr,
-			MDIO_REG_BANK_COMBO_IEEE0,
-			MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
-			&lp_pause);
-		pause_result = (ld_pause &
+		if (bnx2x_direct_parallel_detect_used(params)) {
+			vars->flow_ctrl = params->req_fc_auto_adv;
+			return;
+		}
+		if ((gp_status &
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) ==
+		    (MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE |
+		     MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE)) {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_CL73_IEEEB1,
+					      MDIO_CL73_IEEEB1_AN_ADV1,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+					     params->phy_addr,
+					     MDIO_REG_BANK_CL73_IEEEB1,
+					     MDIO_CL73_IEEEB1_AN_LP_ADV1,
+					     &lp_pause);
+			pause_result = (ld_pause &
+					MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK)
+					>> 8;
+			pause_result |= (lp_pause &
+					MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK)
+					>> 10;
+			DP(NETIF_MSG_LINK, "pause_result CL73 0x%x\n",
+				 pause_result);
+		} else {
+
+			CL45_RD_OVER_CL22(bp, params->port,
+					      params->phy_addr,
+					      MDIO_REG_BANK_COMBO_IEEE0,
+					      MDIO_COMBO_IEEE0_AUTO_NEG_ADV,
+					      &ld_pause);
+			CL45_RD_OVER_CL22(bp, params->port,
+			       params->phy_addr,
+			       MDIO_REG_BANK_COMBO_IEEE0,
+			       MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1,
+			       &lp_pause);
+			pause_result = (ld_pause &
 				MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>5;
-		pause_result |= (lp_pause &
+			pause_result |= (lp_pause &
 				 MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7;
-		DP(NETIF_MSG_LINK, "pause_result 0x%x\n", pause_result);
+			DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n",
+				 pause_result);
+		}
 		bnx2x_pause_resolve(vars, pause_result);
 	} else if ((params->req_flow_ctrl == BNX2X_FLOW_CTRL_AUTO) &&
 		   (bnx2x_ext_phy_resolve_fc(params, vars))) {
@@ -1853,6 +1930,8 @@
 		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
 		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
+		    (XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
 		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726))) {
 			vars->autoneg = AUTO_NEG_ENABLED;
 
@@ -1987,8 +2066,7 @@
 		    GRCBASE_EMAC0 + port*0x400 + EMAC_REG_EMAC_MODE,
 		    mode);
 
-	bnx2x_set_led(bp, params->port, LED_MODE_OPER,
-		    line_speed, params->hw_led_mode, params->chip_id);
+	bnx2x_set_led(params, LED_MODE_OPER, line_speed);
 	return 0;
 }
 
@@ -2122,6 +2200,8 @@
 				       MDIO_PMA_REG_CTRL,
 				       1<<15);
 			break;
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+			break;
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_FAILURE:
 			DP(NETIF_MSG_LINK, "XGXS PHY Failure detected\n");
 			break;
@@ -2512,16 +2592,11 @@
 	/* Need to wait 100ms after reset */
 	msleep(100);
 
-	/* Set serial boot control for external load */
-	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
-		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
-
 	/* Micro controller re-boot */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
-		       MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP);
+		       0x018B);
 
 	/* Set soft reset */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
@@ -2529,14 +2604,10 @@
 		       MDIO_PMA_REG_GEN_CTRL,
 		       MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET);
 
-	/* Set PLL register value to be same like in P13 ver */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_PLL_CTRL,
-		       0x73A0);
+		       MDIO_PMA_REG_MISC_CTRL1, 0x0001);
 
-	/* Clear soft reset.
-	Will automatically reset micro-controller re-boot */
 	bnx2x_cl45_write(bp, port, ext_phy_type, ext_phy_addr,
 		       MDIO_PMA_DEVAD,
 		       MDIO_PMA_REG_GEN_CTRL,
@@ -3462,8 +3533,8 @@
 		       MDIO_PMA_REG_8481_LINK_SIGNAL,
 		       &val1);
 	/* Set bit 2 to 0, and bits [1:0] to 10 */
-	val1 &= ~((1<<0) | (1<<2)); /* Clear bits 0,2*/
-	val1 |= (1<<1); /* Set bit 1 */
+	val1 &= ~((1<<0) | (1<<2) | (1<<7)); /* Clear bits 0,2,7*/
+	val1 |= ((1<<1) | (1<<6)); /* Set bit 1, 6 */
 
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
@@ -3497,36 +3568,19 @@
 		       MDIO_PMA_REG_8481_LED2_MASK,
 		       0);
 
-	/* LED3 (10G/1G/100/10G Activity) */
-	bnx2x_cl45_read(bp, params->port,
-		      ext_phy_type,
-		      ext_phy_addr,
-		      MDIO_PMA_DEVAD,
-		      MDIO_PMA_REG_8481_LINK_SIGNAL,
-		      &val1);
-	/* Enable blink based on source 4(Activity) */
-	val1 &= ~((1<<7) | (1<<8)); /* Clear bits 7,8 */
-	val1 |= (1<<6); /* Set only bit 6 */
+	/* Unmask LED3 for 10G link */
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
 		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_8481_LINK_SIGNAL,
-		       val1);
-
-	bnx2x_cl45_read(bp, params->port,
-		      ext_phy_type,
-		      ext_phy_addr,
-		      MDIO_PMA_DEVAD,
 		      MDIO_PMA_REG_8481_LED3_MASK,
-		      &val1);
-	val1 |= (1<<4); /* Unmask LED3 for 10G link */
+		       0x6);
 	bnx2x_cl45_write(bp, params->port,
 		       ext_phy_type,
 		       ext_phy_addr,
 		       MDIO_PMA_DEVAD,
-		       MDIO_PMA_REG_8481_LED3_MASK,
-		       val1);
+		       MDIO_PMA_REG_8481_LED3_BLINK,
+		       0);
 }
 
 
@@ -3544,7 +3598,10 @@
 			bnx2x_set_preemphasis(params);
 
 		/* forced speed requested? */
-		if (vars->line_speed != SPEED_AUTO_NEG) {
+		if (vars->line_speed != SPEED_AUTO_NEG ||
+		    ((XGXS_EXT_PHY_TYPE(params->ext_phy_config) ==
+		     PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) &&
+			  params->loopback_mode == LOOPBACK_EXT)) {
 			DP(NETIF_MSG_LINK, "not SGMII, no AN\n");
 
 			/* disable autoneg */
@@ -3693,19 +3750,6 @@
 				}
 			}
 			/* Force speed */
-			/* First enable LASI */
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_RX_ALARM_CTRL,
-				       0x0400);
-			bnx2x_cl45_write(bp, params->port,
-				       ext_phy_type,
-				       ext_phy_addr,
-				       MDIO_PMA_DEVAD,
-				       MDIO_PMA_REG_LASI_CTRL, 0x0004);
-
 			if (params->req_line_speed == SPEED_10000) {
 				DP(NETIF_MSG_LINK, "XGXS 8706 force 10Gbps\n");
 
@@ -3715,6 +3759,9 @@
 					       MDIO_PMA_DEVAD,
 					       MDIO_PMA_REG_DIGITAL_CTRL,
 					       0x400);
+				bnx2x_cl45_write(bp, params->port, ext_phy_type,
+					       ext_phy_addr, MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 1);
 			} else {
 				/* Force 1Gbps using autoneg with 1G
 				advertisment */
@@ -3756,6 +3803,17 @@
 					       MDIO_AN_DEVAD,
 					       MDIO_AN_REG_CTRL,
 					       0x1200);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_RX_ALARM_CTRL,
+					       0x0400);
+				bnx2x_cl45_write(bp, params->port,
+					       ext_phy_type,
+					       ext_phy_addr,
+					       MDIO_PMA_DEVAD,
+					       MDIO_PMA_REG_LASI_CTRL, 0x0004);
 
 			}
 			bnx2x_save_bcm_spirom_ver(bp, params->port,
@@ -4291,6 +4349,7 @@
 			break;
 		}
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 			/* This phy uses the NIG latch mechanism since link
 				indication arrives through its LED4 and not via
 				its LASI signal, so we get steady signal
@@ -4298,6 +4357,12 @@
 			bnx2x_bits_en(bp, NIG_REG_LATCH_BC_0 + params->port*4,
 				    1 << NIG_LATCH_BC_ENABLE_MI_INT);
 
+			bnx2x_cl45_write(bp, params->port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 0x0000);
+
 			bnx2x_8481_set_led4(params, ext_phy_type, ext_phy_addr);
 			if (params->req_line_speed == SPEED_AUTO_NEG) {
 
@@ -4394,17 +4459,12 @@
 				    PORT_HW_CFG_SPEED_CAPABILITY_D0_10G) {
 					DP(NETIF_MSG_LINK, "Advertising 10G\n");
 					/* Restart autoneg for 10G*/
-			bnx2x_cl45_read(bp, params->port,
-				      ext_phy_type,
-				      ext_phy_addr,
-				      MDIO_AN_DEVAD,
-				      MDIO_AN_REG_CTRL, &val);
-			val |= 0x200;
+
 			bnx2x_cl45_write(bp, params->port,
 				       ext_phy_type,
 				       ext_phy_addr,
 				       MDIO_AN_DEVAD,
-				       MDIO_AN_REG_CTRL, val);
+				       MDIO_AN_REG_CTRL, 0x3200);
 				}
 			} else {
 				/* Force speed */
@@ -5148,6 +5208,7 @@
 			}
 			break;
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 			/* Check 10G-BaseT link status */
 			/* Check PMD signal ok */
 			bnx2x_cl45_read(bp, params->port, ext_phy_type,
@@ -5363,8 +5424,10 @@
 		     (NIG_STATUS_XGXS0_LINK10G |
 		      NIG_STATUS_XGXS0_LINK_STATUS |
 		      NIG_STATUS_SERDES0_LINK_STATUS));
-	if (XGXS_EXT_PHY_TYPE(params->ext_phy_config)
-	    == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) {
+	if ((XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481) ||
+	(XGXS_EXT_PHY_TYPE(params->ext_phy_config)
+		== PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823)) {
 		bnx2x_8481_rearm_latch_signal(bp, port, is_mi_int);
 	}
 	if (vars->phy_link_up) {
@@ -5477,6 +5540,7 @@
 		status = bnx2x_format_ver(spirom_ver, version, len);
 		break;
 	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481:
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
 		spirom_ver = ((spirom_ver & 0xF80) >> 7) << 16 |
 			(spirom_ver & 0x7F);
 		status = bnx2x_format_ver(spirom_ver, version, len);
@@ -5728,13 +5792,15 @@
 }
 
 
-u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
-	       u16 hw_led_mode, u32 chip_id)
+u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed)
 {
+	u8 port = params->port;
+	u16 hw_led_mode = params->hw_led_mode;
 	u8 rc = 0;
 	u32 tmp;
 	u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
-
+	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config);
+	struct bnx2x *bp = params->bp;
 	DP(NETIF_MSG_LINK, "bnx2x_set_led: port %x, mode %d\n", port, mode);
 	DP(NETIF_MSG_LINK, "speed 0x%x, hw_led_mode 0x%x\n",
 		 speed, hw_led_mode);
@@ -5749,7 +5815,14 @@
 		break;
 
 	case LED_MODE_OPER:
-		REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
+		if (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+			REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+		} else {
+			REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+				   hw_led_mode);
+		}
+
 		REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 +
 			   port*4, 0);
 		/* Set blinking rate to ~15.9Hz */
@@ -5761,7 +5834,7 @@
 		EMAC_WR(bp, EMAC_REG_EMAC_LED,
 			    (tmp & (~EMAC_LED_OVERRIDE)));
 
-		if (!CHIP_IS_E1H(bp) &&
+		if (CHIP_IS_E1(bp) &&
 		    ((speed == SPEED_2500) ||
 		     (speed == SPEED_1000) ||
 		     (speed == SPEED_100) ||
@@ -5864,6 +5937,7 @@
 
 	if (non_ext_phy ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) ||
+	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) ||
 	    (ext_phy_type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) ||
 	    (params->loopback_mode == LOOPBACK_EXT_PHY)) {
 		if (params->req_line_speed == SPEED_AUTO_NEG)
@@ -6030,10 +6104,7 @@
 		REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE +
 			    params->port*4, 0);
 
-		bnx2x_set_led(bp, params->port, LED_MODE_OPER,
-			    vars->line_speed, params->hw_led_mode,
-			    params->chip_id);
-
+		bnx2x_set_led(params, LED_MODE_OPER, vars->line_speed);
 	} else
 	/* No loopback */
 	{
@@ -6091,15 +6162,13 @@
 {
 	struct bnx2x *bp = params->bp;
 	u32 ext_phy_config = params->ext_phy_config;
-	u16 hw_led_mode = params->hw_led_mode;
-	u32 chip_id = params->chip_id;
 	u8 port = params->port;
 	u32 ext_phy_type = XGXS_EXT_PHY_TYPE(ext_phy_config);
 	u32 val = REG_RD(bp, params->shmem_base +
 			     offsetof(struct shmem_region, dev_info.
 				      port_feature_config[params->port].
 				      config));
-
+	DP(NETIF_MSG_LINK, "Resetting the link of port %d\n", port);
 	/* disable attentions */
 	vars->link_status = 0;
 	bnx2x_update_mng(params, vars->link_status);
@@ -6127,7 +6196,7 @@
 	 * Hold it as vars low
 	 */
 	 /* clear link led */
-	bnx2x_set_led(bp, port, LED_MODE_OFF, 0, hw_led_mode, chip_id);
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
 	if (reset_ext_phy) {
 		switch (ext_phy_type) {
 		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT:
@@ -6163,6 +6232,22 @@
 			bnx2x_8726_reset_phy(bp, params->port, ext_phy_addr);
 			break;
 		}
+		case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		{
+			u8 ext_phy_addr =
+				XGXS_EXT_PHY_ADDR(params->ext_phy_config);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_AN_DEVAD,
+				       MDIO_AN_REG_CTRL, 0x0000);
+			bnx2x_cl45_write(bp, port,
+				       PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8481,
+				       ext_phy_addr,
+				       MDIO_PMA_DEVAD,
+				       MDIO_PMA_REG_CTRL, 1);
+			break;
+		}
 		default:
 			/* HW reset */
 			bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_1,
@@ -6198,9 +6283,7 @@
 	u8 port = params->port;
 
 	DP(NETIF_MSG_LINK, "Port %x: Link is down\n", port);
-	bnx2x_set_led(bp, port, LED_MODE_OFF,
-		    0, params->hw_led_mode,
-		    params->chip_id);
+	bnx2x_set_led(params, LED_MODE_OFF, 0);
 
 	/* indicate no mac active */
 	vars->mac_type = MAC_TYPE_NONE;
@@ -6237,15 +6320,13 @@
 	vars->link_status |= LINK_STATUS_LINK_UP;
 	if (link_10g) {
 		bnx2x_bmac_enable(params, vars, 0);
-		bnx2x_set_led(bp, port, LED_MODE_OPER,
-			    SPEED_10000, params->hw_led_mode,
-			    params->chip_id);
-
+		bnx2x_set_led(params, LED_MODE_OPER, SPEED_10000);
 	} else {
-		bnx2x_emac_enable(params, vars, 0);
 		rc = bnx2x_emac_program(params, vars->line_speed,
 				      vars->duplex);
 
+		bnx2x_emac_enable(params, vars, 0);
+
 		/* AN complete? */
 		if (gp_status & MDIO_AN_CL73_OR_37_COMPLETE) {
 			if (!(vars->phy_flags &
@@ -6343,6 +6424,7 @@
 
 	if ((ext_phy_type != PORT_HW_CFG_SERDES_EXT_PHY_TYPE_DIRECT) &&
 	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8705) &&
+	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706) &&
 	    (ext_phy_type != PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726) &&
 	    (ext_phy_link_up && !vars->phy_link_up))
 		bnx2x_init_internal_phy(params, vars, 0);
@@ -6578,6 +6660,13 @@
 	return 0;
 }
 
+
+static u8 bnx2x_84823_common_init_phy(struct bnx2x *bp, u32 shmem_base)
+{
+	/* HW reset */
+	bnx2x_ext_phy_hw_reset(bp, 1);
+	return 0;
+}
 u8 bnx2x_common_init_phy(struct bnx2x *bp, u32 shmem_base)
 {
 	u8 rc = 0;
@@ -6607,7 +6696,9 @@
 		/* GPIO1 affects both ports, so there's need to pull
 		it for single port alone */
 		rc = bnx2x_8726_common_init_phy(bp, shmem_base);
-
+		break;
+	case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM84823:
+		rc = bnx2x_84823_common_init_phy(bp, shmem_base);
 		break;
 	default:
 		DP(NETIF_MSG_LINK,
diff --git a/drivers/net/bnx2x_link.h b/drivers/net/bnx2x_link.h
index f3e2522..40c2981 100644
--- a/drivers/net/bnx2x_link.h
+++ b/drivers/net/bnx2x_link.h
@@ -178,8 +178,7 @@
    Basically, the CLC takes care of the led for the link, but in case one needs
    to set/unset the led unnaturally, set the "mode" to LED_MODE_OPER to
    blink the led, and LED_MODE_OFF to set the led off.*/
-u8 bnx2x_set_led(struct bnx2x *bp, u8 port, u8 mode, u32 speed,
-	       u16 hw_led_mode, u32 chip_id);
+u8 bnx2x_set_led(struct link_params *params, u8 mode, u32 speed);
 #define LED_MODE_OFF	0
 #define LED_MODE_OPER 	2
 
diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c
index 20f0ed9..61974b7 100644
--- a/drivers/net/bnx2x_main.c
+++ b/drivers/net/bnx2x_main.c
@@ -56,8 +56,8 @@
 #include "bnx2x_init_ops.h"
 #include "bnx2x_dump.h"
 
-#define DRV_MODULE_VERSION	"1.52.1"
-#define DRV_MODULE_RELDATE	"2009/08/12"
+#define DRV_MODULE_VERSION	"1.52.1-3"
+#define DRV_MODULE_RELDATE	"2009/11/05"
 #define BNX2X_BC_VER		0x040200
 
 #include <linux/firmware.h>
@@ -742,6 +742,9 @@
 	if (msix) {
 		synchronize_irq(bp->msix_table[0].vector);
 		offset = 1;
+#ifdef BCM_CNIC
+		offset++;
+#endif
 		for_each_queue(bp, i)
 			synchronize_irq(bp->msix_table[i + offset].vector);
 	} else
@@ -966,6 +969,9 @@
 	}
 }
 
+#ifdef BCM_CNIC
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid);
+#endif
 
 static void bnx2x_sp_event(struct bnx2x_fastpath *fp,
 			   union eth_rx_cqe *rr_cqe)
@@ -1022,16 +1028,24 @@
 		bnx2x_fp(bp, cid, state) = BNX2X_FP_STATE_CLOSED;
 		break;
 
+#ifdef BCM_CNIC
+	case (RAMROD_CMD_ID_ETH_CFC_DEL | BNX2X_STATE_OPEN):
+		DP(NETIF_MSG_IFDOWN, "got delete ramrod for CID %d\n", cid);
+		bnx2x_cnic_cfc_comp(bp, cid);
+		break;
+#endif
 
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_OPEN):
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DIAG):
 		DP(NETIF_MSG_IFUP, "got set mac ramrod\n");
-		bp->set_mac_pending = 0;
+		bp->set_mac_pending--;
+		smp_wmb();
 		break;
 
 	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_CLOSING_WAIT4_HALT):
-	case (RAMROD_CMD_ID_ETH_SET_MAC | BNX2X_STATE_DISABLED):
 		DP(NETIF_MSG_IFDOWN, "got (un)set mac ramrod\n");
+		bp->set_mac_pending--;
+		smp_wmb();
 		break;
 
 	default:
@@ -1804,6 +1818,20 @@
 		}
 	}
 
+#ifdef BCM_CNIC
+	mask = 0x2 << CNIC_SB_ID(bp);
+	if (status & (mask | 0x1)) {
+		struct cnic_ops *c_ops = NULL;
+
+		rcu_read_lock();
+		c_ops = rcu_dereference(bp->cnic_ops);
+		if (c_ops)
+			c_ops->cnic_handler(bp->cnic_data, NULL);
+		rcu_read_unlock();
+
+		status &= ~mask;
+	}
+#endif
 
 	if (unlikely(status & 0x1)) {
 		queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
@@ -2128,18 +2156,30 @@
 
 static void bnx2x_link_report(struct bnx2x *bp)
 {
-	if (bp->state == BNX2X_STATE_DISABLED) {
+	if (bp->flags & MF_FUNC_DIS) {
 		netif_carrier_off(bp->dev);
 		printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
 		return;
 	}
 
 	if (bp->link_vars.link_up) {
+		u16 line_speed;
+
 		if (bp->state == BNX2X_STATE_OPEN)
 			netif_carrier_on(bp->dev);
 		printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
 
-		printk("%d Mbps ", bp->link_vars.line_speed);
+		line_speed = bp->link_vars.line_speed;
+		if (IS_E1HMF(bp)) {
+			u16 vn_max_rate;
+
+			vn_max_rate =
+				((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
+				 FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
+			if (vn_max_rate < line_speed)
+				line_speed = vn_max_rate;
+		}
+		printk("%d Mbps ", line_speed);
 
 		if (bp->link_vars.duplex == DUPLEX_FULL)
 			printk("full duplex");
@@ -2304,8 +2344,14 @@
 	}
 
 	/* ... only if all min rates are zeros - disable fairness */
-	if (all_zero)
-		bp->vn_weight_sum = 0;
+	if (all_zero) {
+		bp->cmng.flags.cmng_enables &=
+					~CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
+		DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
+		   "  fairness will be disabled\n");
+	} else
+		bp->cmng.flags.cmng_enables |=
+					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
 }
 
 static void bnx2x_init_vn_minmax(struct bnx2x *bp, int func)
@@ -2324,17 +2370,14 @@
 	} else {
 		vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
 				FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
-		/* If fairness is enabled (not all min rates are zeroes) and
-		   if current min rate is zero - set it to 1.
-		   This is a requirement of the algorithm. */
-		if (bp->vn_weight_sum && (vn_min_rate == 0))
+		/* If min rate is zero - set it to 1 */
+		if (!vn_min_rate)
 			vn_min_rate = DEF_MIN_RATE;
 		vn_max_rate = ((vn_cfg & FUNC_MF_CFG_MAX_BW_MASK) >>
 				FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
 	}
-
 	DP(NETIF_MSG_IFUP,
-	   "func %d: vn_min_rate=%d  vn_max_rate=%d  vn_weight_sum=%d\n",
+	   "func %d: vn_min_rate %d  vn_max_rate %d  vn_weight_sum %d\n",
 	   func, vn_min_rate, vn_max_rate, bp->vn_weight_sum);
 
 	memset(&m_rs_vn, 0, sizeof(struct rate_shaping_vars_per_vn));
@@ -2405,8 +2448,7 @@
 			memset(&(pstats->mac_stx[0]), 0,
 			       sizeof(struct mac_stx));
 		}
-		if ((bp->state == BNX2X_STATE_OPEN) ||
-		    (bp->state == BNX2X_STATE_DISABLED))
+		if (bp->state == BNX2X_STATE_OPEN)
 			bnx2x_stats_handle(bp, STATS_EVENT_LINK_UP);
 	}
 
@@ -2449,9 +2491,7 @@
 
 static void bnx2x__link_status_update(struct bnx2x *bp)
 {
-	int func = BP_FUNC(bp);
-
-	if (bp->state != BNX2X_STATE_OPEN)
+	if ((bp->state != BNX2X_STATE_OPEN) || (bp->flags & MF_FUNC_DIS))
 		return;
 
 	bnx2x_link_status_update(&bp->link_params, &bp->link_vars);
@@ -2461,7 +2501,6 @@
 	else
 		bnx2x_stats_handle(bp, STATS_EVENT_STOP);
 
-	bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 	bnx2x_calc_vn_weight_sum(bp);
 
 	/* indicate link status */
@@ -2501,6 +2540,7 @@
 	u32 cnt = 1;
 	u8 delay = CHIP_REV_IS_SLOW(bp) ? 100 : 10;
 
+	mutex_lock(&bp->fw_mb_mutex);
 	SHMEM_WR(bp, func_mb[func].drv_mb_header, (command | seq));
 	DP(BNX2X_MSG_MCP, "wrote command (%x) to FW MB\n", (command | seq));
 
@@ -2510,8 +2550,8 @@
 
 		rc = SHMEM_RD(bp, func_mb[func].fw_mb_header);
 
-		/* Give the FW up to 2 second (200*10ms) */
-	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 200));
+		/* Give the FW up to 5 second (500*10ms) */
+	} while ((seq != (rc & FW_MSG_SEQ_NUMBER_MASK)) && (cnt++ < 500));
 
 	DP(BNX2X_MSG_MCP, "[after %d ms] read (%x) seq is (%x) from FW MB\n",
 	   cnt*delay, rc, seq);
@@ -2525,32 +2565,24 @@
 		bnx2x_fw_dump(bp);
 		rc = 0;
 	}
+	mutex_unlock(&bp->fw_mb_mutex);
 
 	return rc;
 }
 
 static void bnx2x_set_storm_rx_mode(struct bnx2x *bp);
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set);
+static void bnx2x_set_eth_mac_addr_e1h(struct bnx2x *bp, int set);
 static void bnx2x_set_rx_mode(struct net_device *dev);
 
 static void bnx2x_e1h_disable(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
-	int i;
-
-	bp->rx_mode = BNX2X_RX_MODE_NONE;
-	bnx2x_set_storm_rx_mode(bp);
 
 	netif_tx_disable(bp->dev);
 	bp->dev->trans_start = jiffies;	/* prevent tx timeout */
 
 	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
 
-	bnx2x_set_mac_addr_e1h(bp, 0);
-
-	for (i = 0; i < MC_HASH_SIZE; i++)
-		REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
-
 	netif_carrier_off(bp->dev);
 }
 
@@ -2560,13 +2592,13 @@
 
 	REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 1);
 
-	bnx2x_set_mac_addr_e1h(bp, 1);
-
 	/* Tx queue should be only reenabled */
 	netif_tx_wake_all_queues(bp->dev);
 
-	/* Initialize the receive filter. */
-	bnx2x_set_rx_mode(bp->dev);
+	/*
+	 * Should not call netif_carrier_on since it will be called if the link
+	 * is up when checking for link state
+	 */
 }
 
 static void bnx2x_update_min_max(struct bnx2x *bp)
@@ -2605,21 +2637,23 @@
 
 static void bnx2x_dcc_event(struct bnx2x *bp, u32 dcc_event)
 {
-	int func = BP_FUNC(bp);
-
 	DP(BNX2X_MSG_MCP, "dcc_event 0x%x\n", dcc_event);
-	bp->mf_config = SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 
 	if (dcc_event & DRV_STATUS_DCC_DISABLE_ENABLE_PF) {
 
+		/*
+		 * This is the only place besides the function initialization
+		 * where the bp->flags can change so it is done without any
+		 * locks
+		 */
 		if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
 			DP(NETIF_MSG_IFDOWN, "mf_cfg function disabled\n");
-			bp->state = BNX2X_STATE_DISABLED;
+			bp->flags |= MF_FUNC_DIS;
 
 			bnx2x_e1h_disable(bp);
 		} else {
 			DP(NETIF_MSG_IFUP, "mf_cfg function enabled\n");
-			bp->state = BNX2X_STATE_OPEN;
+			bp->flags &= ~MF_FUNC_DIS;
 
 			bnx2x_e1h_enable(bp);
 		}
@@ -2638,11 +2672,40 @@
 		bnx2x_fw_command(bp, DRV_MSG_CODE_DCC_OK);
 }
 
+/* must be called under the spq lock */
+static inline struct eth_spe *bnx2x_sp_get_next(struct bnx2x *bp)
+{
+	struct eth_spe *next_spe = bp->spq_prod_bd;
+
+	if (bp->spq_prod_bd == bp->spq_last_bd) {
+		bp->spq_prod_bd = bp->spq;
+		bp->spq_prod_idx = 0;
+		DP(NETIF_MSG_TIMER, "end of spq\n");
+	} else {
+		bp->spq_prod_bd++;
+		bp->spq_prod_idx++;
+	}
+	return next_spe;
+}
+
+/* must be called under the spq lock */
+static inline void bnx2x_sp_prod_update(struct bnx2x *bp)
+{
+	int func = BP_FUNC(bp);
+
+	/* Make sure that BD data is updated before writing the producer */
+	wmb();
+
+	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
+	       bp->spq_prod_idx);
+	mmiowb();
+}
+
 /* the slow path queue is odd since completions arrive on the fastpath ring */
 static int bnx2x_sp_post(struct bnx2x *bp, int command, int cid,
 			 u32 data_hi, u32 data_lo, int common)
 {
-	int func = BP_FUNC(bp);
+	struct eth_spe *spe;
 
 	DP(BNX2X_MSG_SP/*NETIF_MSG_TIMER*/,
 	   "SPQE (%x:%x)  command %d  hw_cid %x  data (%x:%x)  left %x\n",
@@ -2664,38 +2727,23 @@
 		return -EBUSY;
 	}
 
+	spe = bnx2x_sp_get_next(bp);
+
 	/* CID needs port number to be encoded int it */
-	bp->spq_prod_bd->hdr.conn_and_cmd_data =
+	spe->hdr.conn_and_cmd_data =
 			cpu_to_le32(((command << SPE_HDR_CMD_ID_SHIFT) |
 				     HW_CID(bp, cid)));
-	bp->spq_prod_bd->hdr.type = cpu_to_le16(ETH_CONNECTION_TYPE);
+	spe->hdr.type = cpu_to_le16(ETH_CONNECTION_TYPE);
 	if (common)
-		bp->spq_prod_bd->hdr.type |=
+		spe->hdr.type |=
 			cpu_to_le16((1 << SPE_HDR_COMMON_RAMROD_SHIFT));
 
-	bp->spq_prod_bd->data.mac_config_addr.hi = cpu_to_le32(data_hi);
-	bp->spq_prod_bd->data.mac_config_addr.lo = cpu_to_le32(data_lo);
+	spe->data.mac_config_addr.hi = cpu_to_le32(data_hi);
+	spe->data.mac_config_addr.lo = cpu_to_le32(data_lo);
 
 	bp->spq_left--;
 
-	if (bp->spq_prod_bd == bp->spq_last_bd) {
-		bp->spq_prod_bd = bp->spq;
-		bp->spq_prod_idx = 0;
-		DP(NETIF_MSG_TIMER, "end of spq\n");
-
-	} else {
-		bp->spq_prod_bd++;
-		bp->spq_prod_idx++;
-	}
-
-	/* Make sure that BD data is updated before writing the producer */
-	wmb();
-
-	REG_WR(bp, BAR_XSTRORM_INTMEM + XSTORM_SPQ_PROD_OFFSET(func),
-	       bp->spq_prod_idx);
-
-	mmiowb();
-
+	bnx2x_sp_prod_update(bp);
 	spin_unlock_bh(&bp->spq_lock);
 	return 0;
 }
@@ -3024,6 +3072,8 @@
 			int func = BP_FUNC(bp);
 
 			REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_12 + func*4, 0);
+			bp->mf_config = SHMEM_RD(bp,
+					   mf_cfg.func_mf_config[func].config);
 			val = SHMEM_RD(bp, func_mb[func].drv_status);
 			if (val & DRV_STATUS_DCC_EVENT_MASK)
 				bnx2x_dcc_event(bp,
@@ -3227,6 +3277,17 @@
 		return IRQ_HANDLED;
 #endif
 
+#ifdef BCM_CNIC
+	{
+		struct cnic_ops *c_ops;
+
+		rcu_read_lock();
+		c_ops = rcu_dereference(bp->cnic_ops);
+		if (c_ops)
+			c_ops->cnic_handler(bp->cnic_data, NULL);
+		rcu_read_unlock();
+	}
+#endif
 	queue_delayed_work(bnx2x_wq, &bp->sp_task, 0);
 
 	return IRQ_HANDLED;
@@ -4640,8 +4701,7 @@
 		}
 	}
 
-	if ((bp->state == BNX2X_STATE_OPEN) ||
-	    (bp->state == BNX2X_STATE_DISABLED))
+	if (bp->state == BNX2X_STATE_OPEN)
 		bnx2x_stats_handle(bp, STATS_EVENT_UPDATE);
 
 timer_restart:
@@ -5235,7 +5295,7 @@
 {
 	struct tstorm_eth_mac_filter_config tstorm_mac_filter = {0};
 	int mode = bp->rx_mode;
-	int mask = (1 << BP_L_ID(bp));
+	int mask = bp->rx_mode_cl_mask;
 	int func = BP_FUNC(bp);
 	int port = BP_PORT(bp);
 	int i;
@@ -5348,6 +5408,7 @@
 	       (*(u32 *)&tstorm_config));
 
 	bp->rx_mode = BNX2X_RX_MODE_NONE; /* no rx until link is up */
+	bp->rx_mode_cl_mask = (1 << BP_L_ID(bp));
 	bnx2x_set_storm_rx_mode(bp);
 
 	for_each_queue(bp, i) {
@@ -5504,20 +5565,18 @@
 		bp->link_vars.line_speed = SPEED_10000;
 		bnx2x_init_port_minmax(bp);
 
+		if (!BP_NOMCP(bp))
+			bp->mf_config =
+			      SHMEM_RD(bp, mf_cfg.func_mf_config[func].config);
 		bnx2x_calc_vn_weight_sum(bp);
 
 		for (vn = VN_0; vn < E1HVN_MAX; vn++)
 			bnx2x_init_vn_minmax(bp, 2*vn + port);
 
 		/* Enable rate shaping and fairness */
-		bp->cmng.flags.cmng_enables =
+		bp->cmng.flags.cmng_enables |=
 					CMNG_FLAGS_PER_PORT_RATE_SHAPING_VN;
-		if (bp->vn_weight_sum)
-			bp->cmng.flags.cmng_enables |=
-					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
-		else
-			DP(NETIF_MSG_IFUP, "All MIN values are zeroes"
-			   "  fairness will be disabled\n");
+
 	} else {
 		/* rate shaping and fairness are disabled */
 		DP(NETIF_MSG_IFUP,
@@ -5565,7 +5624,11 @@
 		fp->state = BNX2X_FP_STATE_CLOSED;
 		fp->index = i;
 		fp->cl_id = BP_L_ID(bp) + i;
+#ifdef BCM_CNIC
+		fp->sb_id = fp->cl_id + 1;
+#else
 		fp->sb_id = fp->cl_id;
+#endif
 		/* Suitable Rx and Tx SBs are served by the same client */
 		if (i >= bp->num_rx_queues)
 			fp->cl_id -= bp->num_rx_queues;
@@ -5867,7 +5930,7 @@
 	msleep(50);
 	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
 	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
-#ifndef BCM_ISCSI
+#ifndef BCM_CNIC
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
 #endif
@@ -6006,6 +6069,9 @@
 static int bnx2x_init_common(struct bnx2x *bp)
 {
 	u32 val, i;
+#ifdef BCM_CNIC
+	u32 wb_write[2];
+#endif
 
 	DP(BNX2X_MSG_MCP, "starting common init  func %d\n", BP_FUNC(bp));
 
@@ -6048,7 +6114,7 @@
 #endif
 
 	REG_WR(bp, PXP2_REG_RQ_CDU_P_SIZE, 2);
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	REG_WR(bp, PXP2_REG_RQ_TM_P_SIZE, 5);
 	REG_WR(bp, PXP2_REG_RQ_QM_P_SIZE, 5);
 	REG_WR(bp, PXP2_REG_RQ_SRC_P_SIZE, 5);
@@ -6091,11 +6157,26 @@
 	bnx2x_read_dmae(bp, USEM_REG_PASSIVE_BUFFER, 3);
 
 	bnx2x_init_block(bp, QM_BLOCK, COMMON_STAGE);
+
+#ifdef BCM_CNIC
+	wb_write[0] = 0;
+	wb_write[1] = 0;
+	for (i = 0; i < 64; i++) {
+		REG_WR(bp, QM_REG_BASEADDR + i*4, 1024 * 4 * (i%16));
+		bnx2x_init_ind_wr(bp, QM_REG_PTRTBL + i*8, wb_write, 2);
+
+		if (CHIP_IS_E1H(bp)) {
+			REG_WR(bp, QM_REG_BASEADDR_EXT_A + i*4, 1024*4*(i%16));
+			bnx2x_init_ind_wr(bp, QM_REG_PTRTBL_EXT_A + i*8,
+					  wb_write, 2);
+		}
+	}
+#endif
 	/* soft reset pulse */
 	REG_WR(bp, QM_REG_SOFT_RESET, 1);
 	REG_WR(bp, QM_REG_SOFT_RESET, 0);
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	bnx2x_init_block(bp, TIMERS_BLOCK, COMMON_STAGE);
 #endif
 
@@ -6109,8 +6190,10 @@
 	bnx2x_init_block(bp, BRB1_BLOCK, COMMON_STAGE);
 	bnx2x_init_block(bp, PRS_BLOCK, COMMON_STAGE);
 	REG_WR(bp, PRS_REG_A_PRSU_20, 0xf);
+#ifndef BCM_CNIC
 	/* set NIC mode */
 	REG_WR(bp, PRS_REG_NIC_MODE, 1);
+#endif
 	if (CHIP_IS_E1H(bp))
 		REG_WR(bp, PRS_REG_E1HOV_MODE, IS_E1HMF(bp));
 
@@ -6145,6 +6228,18 @@
 		/* TODO: replace with something meaningful */
 	}
 	bnx2x_init_block(bp, SRCH_BLOCK, COMMON_STAGE);
+#ifdef BCM_CNIC
+	REG_WR(bp, SRC_REG_KEYSEARCH_0, 0x63285672);
+	REG_WR(bp, SRC_REG_KEYSEARCH_1, 0x24b8f2cc);
+	REG_WR(bp, SRC_REG_KEYSEARCH_2, 0x223aef9b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_3, 0x26001e3a);
+	REG_WR(bp, SRC_REG_KEYSEARCH_4, 0x7ae91116);
+	REG_WR(bp, SRC_REG_KEYSEARCH_5, 0x5ce5230b);
+	REG_WR(bp, SRC_REG_KEYSEARCH_6, 0x298d8adf);
+	REG_WR(bp, SRC_REG_KEYSEARCH_7, 0x6eb0ff09);
+	REG_WR(bp, SRC_REG_KEYSEARCH_8, 0x1830f82f);
+	REG_WR(bp, SRC_REG_KEYSEARCH_9, 0x01e46be7);
+#endif
 	REG_WR(bp, SRC_REG_SOFT_RST, 0);
 
 	if (sizeof(union cdu_context) != 1024)
@@ -6261,38 +6356,14 @@
 	bnx2x_init_block(bp, TCM_BLOCK, init_stage);
 	bnx2x_init_block(bp, UCM_BLOCK, init_stage);
 	bnx2x_init_block(bp, CCM_BLOCK, init_stage);
-#ifdef BCM_ISCSI
-	/* Port0  1
-	 * Port1  385 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->timers_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->timers_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_TM0_L2P + func*4, PXP_ONE_ILT(i));
-
-	/* Port0  2
-	 * Port1  386 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->qm_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->qm_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_QM0_L2P + func*4, PXP_ONE_ILT(i));
-
-	/* Port0  3
-	 * Port1  387 */
-	i++;
-	wb_write[0] = ONCHIP_ADDR1(bp->t1_mapping);
-	wb_write[1] = ONCHIP_ADDR2(bp->t1_mapping);
-	REG_WR_DMAE(bp, PXP2_REG_RQ_ONCHIP_AT + i*8, wb_write, 2);
-	REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
-#endif
 	bnx2x_init_block(bp, XCM_BLOCK, init_stage);
 
-#ifdef BCM_ISCSI
-	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + func*4, 1024/64*20);
-	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + func*4, 31);
+#ifdef BCM_CNIC
+	REG_WR(bp, QM_REG_CONNNUM_0 + port*4, 1024/16 - 1);
 
 	bnx2x_init_block(bp, TIMERS_BLOCK, init_stage);
+	REG_WR(bp, TM_REG_LIN0_SCAN_TIME + port*4, 20);
+	REG_WR(bp, TM_REG_LIN0_MAX_ACTIVE_CID + port*4, 31);
 #endif
 	bnx2x_init_block(bp, DQ_BLOCK, init_stage);
 
@@ -6350,18 +6421,8 @@
 	msleep(5);
 	REG_WR(bp, PBF_REG_INIT_P0 + port*4, 0);
 
-#ifdef BCM_ISCSI
-	/* tell the searcher where the T2 table is */
-	REG_WR(bp, SRC_REG_COUNTFREE0 + func*4, 16*1024/64);
-
-	wb_write[0] = U64_LO(bp->t2_mapping);
-	wb_write[1] = U64_HI(bp->t2_mapping);
-	REG_WR_DMAE(bp, SRC_REG_FIRSTFREE0 + func*4, wb_write, 2);
-	wb_write[0] = U64_LO((u64)bp->t2_mapping + 16*1024 - 64);
-	wb_write[1] = U64_HI((u64)bp->t2_mapping + 16*1024 - 64);
-	REG_WR_DMAE(bp, SRC_REG_LASTFREE0 + func*4, wb_write, 2);
-
-	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + func*4, 10);
+#ifdef BCM_CNIC
+	bnx2x_init_block(bp, SRCH_BLOCK, init_stage);
 #endif
 	bnx2x_init_block(bp, CDU_BLOCK, init_stage);
 	bnx2x_init_block(bp, CFC_BLOCK, init_stage);
@@ -6470,7 +6531,12 @@
 #define PXP_ONE_ILT(x)		(((x) << 10) | x)
 #define PXP_ILT_RANGE(f, l)	(((l) << 10) | f)
 
+#ifdef BCM_CNIC
+#define CNIC_ILT_LINES		127
+#define CNIC_CTX_PER_ILT	16
+#else
 #define CNIC_ILT_LINES		0
+#endif
 
 static void bnx2x_ilt_wr(struct bnx2x *bp, u32 index, dma_addr_t addr)
 {
@@ -6509,6 +6575,46 @@
 		REG_WR(bp, PXP2_REG_PSWRQ_CDU0_L2P + func*4,
 		       PXP_ILT_RANGE(i, i + CNIC_ILT_LINES));
 
+#ifdef BCM_CNIC
+	i += 1 + CNIC_ILT_LINES;
+	bnx2x_ilt_wr(bp, i, bp->timers_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_TM0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_TM_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_TM_LAST_ILT, i);
+	}
+
+	i++;
+	bnx2x_ilt_wr(bp, i, bp->qm_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_QM0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_QM_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_QM_LAST_ILT, i);
+	}
+
+	i++;
+	bnx2x_ilt_wr(bp, i, bp->t1_mapping);
+	if (CHIP_IS_E1(bp))
+		REG_WR(bp, PXP2_REG_PSWRQ_SRC0_L2P + func*4, PXP_ONE_ILT(i));
+	else {
+		REG_WR(bp, PXP2_REG_RQ_SRC_FIRST_ILT, i);
+		REG_WR(bp, PXP2_REG_RQ_SRC_LAST_ILT, i);
+	}
+
+	/* tell the searcher where the T2 table is */
+	REG_WR(bp, SRC_REG_COUNTFREE0 + port*4, 16*1024/64);
+
+	bnx2x_wb_wr(bp, SRC_REG_FIRSTFREE0 + port*16,
+		    U64_LO(bp->t2_mapping), U64_HI(bp->t2_mapping));
+
+	bnx2x_wb_wr(bp, SRC_REG_LASTFREE0 + port*16,
+		    U64_LO((u64)bp->t2_mapping + 16*1024 - 64),
+		    U64_HI((u64)bp->t2_mapping + 16*1024 - 64));
+
+	REG_WR(bp, SRC_REG_NUMBER_HASH_BITS0 + port*4, 10);
+#endif
 
 	if (CHIP_IS_E1H(bp)) {
 		bnx2x_init_block(bp, MISC_BLOCK, FUNC0_STAGE + func);
@@ -6593,6 +6699,9 @@
 	bnx2x_zero_def_sb(bp);
 	for_each_queue(bp, i)
 		bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
+#ifdef BCM_CNIC
+	bnx2x_zero_sb(bp, BP_L_ID(bp) + i);
+#endif
 
 init_hw_err:
 	bnx2x_gunzip_end(bp);
@@ -6668,11 +6777,13 @@
 	BNX2X_PCI_FREE(bp->slowpath, bp->slowpath_mapping,
 		       sizeof(struct bnx2x_slowpath));
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	BNX2X_PCI_FREE(bp->t1, bp->t1_mapping, 64*1024);
 	BNX2X_PCI_FREE(bp->t2, bp->t2_mapping, 16*1024);
 	BNX2X_PCI_FREE(bp->timers, bp->timers_mapping, 8*1024);
 	BNX2X_PCI_FREE(bp->qm, bp->qm_mapping, 128*1024);
+	BNX2X_PCI_FREE(bp->cnic_sb, bp->cnic_sb_mapping,
+		       sizeof(struct host_status_block));
 #endif
 	BNX2X_PCI_FREE(bp->spq, bp->spq_mapping, BCM_PAGE_SIZE);
 
@@ -6751,32 +6862,26 @@
 	BNX2X_PCI_ALLOC(bp->slowpath, &bp->slowpath_mapping,
 			sizeof(struct bnx2x_slowpath));
 
-#ifdef BCM_ISCSI
+#ifdef BCM_CNIC
 	BNX2X_PCI_ALLOC(bp->t1, &bp->t1_mapping, 64*1024);
 
-	/* Initialize T1 */
-	for (i = 0; i < 64*1024; i += 64) {
-		*(u64 *)((char *)bp->t1 + i + 56) = 0x0UL;
-		*(u64 *)((char *)bp->t1 + i + 3) = 0x0UL;
-	}
-
 	/* allocate searcher T2 table
 	   we allocate 1/4 of alloc num for T2
 	  (which is not entered into the ILT) */
 	BNX2X_PCI_ALLOC(bp->t2, &bp->t2_mapping, 16*1024);
 
-	/* Initialize T2 */
+	/* Initialize T2 (for 1024 connections) */
 	for (i = 0; i < 16*1024; i += 64)
-		* (u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
+		*(u64 *)((char *)bp->t2 + i + 56) = bp->t2_mapping + i + 64;
 
-	/* now fixup the last line in the block to point to the next block */
-	*(u64 *)((char *)bp->t2 + 1024*16-8) = bp->t2_mapping;
-
-	/* Timer block array (MAX_CONN*8) phys uncached for now 1024 conns */
+	/* Timer block array (8*MAX_CONN) phys uncached for now 1024 conns */
 	BNX2X_PCI_ALLOC(bp->timers, &bp->timers_mapping, 8*1024);
 
 	/* QM queues (128*MAX_CONN) */
 	BNX2X_PCI_ALLOC(bp->qm, &bp->qm_mapping, 128*1024);
+
+	BNX2X_PCI_ALLOC(bp->cnic_sb, &bp->cnic_sb_mapping,
+			sizeof(struct host_status_block));
 #endif
 
 	/* Slow path ring */
@@ -6852,6 +6957,9 @@
 	DP(NETIF_MSG_IFDOWN, "released sp irq (%d)\n",
 	   bp->msix_table[0].vector);
 
+#ifdef BCM_CNIC
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		DP(NETIF_MSG_IFDOWN, "about to release fp #%d->%d irq  "
 		   "state %x\n", i, bp->msix_table[i + offset].vector,
@@ -6885,6 +6993,12 @@
 	bp->msix_table[0].entry = igu_vec;
 	DP(NETIF_MSG_IFUP, "msix_table[0].entry = %d (slowpath)\n", igu_vec);
 
+#ifdef BCM_CNIC
+	igu_vec = BP_L_ID(bp) + offset;
+	bp->msix_table[1].entry = igu_vec;
+	DP(NETIF_MSG_IFUP, "msix_table[1].entry = %d (CNIC)\n", igu_vec);
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		igu_vec = BP_L_ID(bp) + offset + i;
 		bp->msix_table[i + offset].entry = igu_vec;
@@ -6915,6 +7029,9 @@
 		return -EBUSY;
 	}
 
+#ifdef BCM_CNIC
+	offset++;
+#endif
 	for_each_queue(bp, i) {
 		struct bnx2x_fastpath *fp = &bp->fp[i];
 
@@ -7022,7 +7139,19 @@
  * Init service functions
  */
 
-static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set)
+/**
+ * Sets a MAC in a CAM for a few L2 Clients for E1 chip
+ *
+ * @param bp driver descriptor
+ * @param set set or clear an entry (1 or 0)
+ * @param mac pointer to a buffer containing a MAC
+ * @param cl_bit_vec bit vector of clients to register a MAC for
+ * @param cam_offset offset in a CAM to use
+ * @param with_bcast set broadcast MAC as well
+ */
+static void bnx2x_set_mac_addr_e1_gen(struct bnx2x *bp, int set, u8 *mac,
+				      u32 cl_bit_vec, u8 cam_offset,
+				      u8 with_bcast)
 {
 	struct mac_configuration_cmd *config = bnx2x_sp(bp, mac_config);
 	int port = BP_PORT(bp);
@@ -7031,25 +7160,25 @@
 	 * unicasts 0-31:port0 32-63:port1
 	 * multicast 64-127:port0 128-191:port1
 	 */
-	config->hdr.length = 2;
-	config->hdr.offset = port ? 32 : 0;
-	config->hdr.client_id = bp->fp->cl_id;
+	config->hdr.length = 1 + (with_bcast ? 1 : 0);
+	config->hdr.offset = cam_offset;
+	config->hdr.client_id = 0xff;
 	config->hdr.reserved1 = 0;
 
 	/* primary MAC */
 	config->config_table[0].cam_entry.msb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[0]);
+					swab16(*(u16 *)&mac[0]);
 	config->config_table[0].cam_entry.middle_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[2]);
+					swab16(*(u16 *)&mac[2]);
 	config->config_table[0].cam_entry.lsb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[4]);
+					swab16(*(u16 *)&mac[4]);
 	config->config_table[0].cam_entry.flags = cpu_to_le16(port);
 	if (set)
 		config->config_table[0].target_table_entry.flags = 0;
 	else
 		CAM_INVALIDATE(config->config_table[0]);
 	config->config_table[0].target_table_entry.clients_bit_vector =
-						cpu_to_le32(1 << BP_L_ID(bp));
+						cpu_to_le32(cl_bit_vec);
 	config->config_table[0].target_table_entry.vlan_id = 0;
 
 	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)\n",
@@ -7059,47 +7188,58 @@
 	   config->config_table[0].cam_entry.lsb_mac_addr);
 
 	/* broadcast */
-	config->config_table[1].cam_entry.msb_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.middle_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.lsb_mac_addr = cpu_to_le16(0xffff);
-	config->config_table[1].cam_entry.flags = cpu_to_le16(port);
-	if (set)
-		config->config_table[1].target_table_entry.flags =
-				TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
-	else
-		CAM_INVALIDATE(config->config_table[1]);
-	config->config_table[1].target_table_entry.clients_bit_vector =
-						cpu_to_le32(1 << BP_L_ID(bp));
-	config->config_table[1].target_table_entry.vlan_id = 0;
+	if (with_bcast) {
+		config->config_table[1].cam_entry.msb_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.middle_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.lsb_mac_addr =
+			cpu_to_le16(0xffff);
+		config->config_table[1].cam_entry.flags = cpu_to_le16(port);
+		if (set)
+			config->config_table[1].target_table_entry.flags =
+					TSTORM_CAM_TARGET_TABLE_ENTRY_BROADCAST;
+		else
+			CAM_INVALIDATE(config->config_table[1]);
+		config->config_table[1].target_table_entry.clients_bit_vector =
+							cpu_to_le32(cl_bit_vec);
+		config->config_table[1].target_table_entry.vlan_id = 0;
+	}
 
 	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 		      U64_HI(bnx2x_sp_mapping(bp, mac_config)),
 		      U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 }
 
-static void bnx2x_set_mac_addr_e1h(struct bnx2x *bp, int set)
+/**
+ * Sets a MAC in a CAM for a few L2 Clients for E1H chip
+ *
+ * @param bp driver descriptor
+ * @param set set or clear an entry (1 or 0)
+ * @param mac pointer to a buffer containing a MAC
+ * @param cl_bit_vec bit vector of clients to register a MAC for
+ * @param cam_offset offset in a CAM to use
+ */
+static void bnx2x_set_mac_addr_e1h_gen(struct bnx2x *bp, int set, u8 *mac,
+				       u32 cl_bit_vec, u8 cam_offset)
 {
 	struct mac_configuration_cmd_e1h *config =
 		(struct mac_configuration_cmd_e1h *)bnx2x_sp(bp, mac_config);
 
-	/* CAM allocation for E1H
-	 * unicasts: by func number
-	 * multicast: 20+FUNC*20, 20 each
-	 */
 	config->hdr.length = 1;
-	config->hdr.offset = BP_FUNC(bp);
-	config->hdr.client_id = bp->fp->cl_id;
+	config->hdr.offset = cam_offset;
+	config->hdr.client_id = 0xff;
 	config->hdr.reserved1 = 0;
 
 	/* primary MAC */
 	config->config_table[0].msb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[0]);
+					swab16(*(u16 *)&mac[0]);
 	config->config_table[0].middle_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[2]);
+					swab16(*(u16 *)&mac[2]);
 	config->config_table[0].lsb_mac_addr =
-					swab16(*(u16 *)&bp->dev->dev_addr[4]);
+					swab16(*(u16 *)&mac[4]);
 	config->config_table[0].clients_bit_vector =
-					cpu_to_le32(1 << BP_L_ID(bp));
+					cpu_to_le32(cl_bit_vec);
 	config->config_table[0].vlan_id = 0;
 	config->config_table[0].e1hov_id = cpu_to_le16(bp->e1hov);
 	if (set)
@@ -7108,11 +7248,11 @@
 		config->config_table[0].flags =
 				MAC_CONFIGURATION_ENTRY_E1H_ACTION_TYPE;
 
-	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID %d\n",
+	DP(NETIF_MSG_IFUP, "%s MAC (%04x:%04x:%04x)  E1HOV %d  CLID mask %d\n",
 	   (set ? "setting" : "clearing"),
 	   config->config_table[0].msb_mac_addr,
 	   config->config_table[0].middle_mac_addr,
-	   config->config_table[0].lsb_mac_addr, bp->e1hov, BP_L_ID(bp));
+	   config->config_table[0].lsb_mac_addr, bp->e1hov, cl_bit_vec);
 
 	bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 		      U64_HI(bnx2x_sp_mapping(bp, mac_config)),
@@ -7164,6 +7304,69 @@
 	return -EBUSY;
 }
 
+static void bnx2x_set_eth_mac_addr_e1h(struct bnx2x *bp, int set)
+{
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	bnx2x_set_mac_addr_e1h_gen(bp, set, bp->dev->dev_addr,
+				   (1 << bp->fp->cl_id), BP_FUNC(bp));
+
+	/* Wait for a completion */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+}
+
+static void bnx2x_set_eth_mac_addr_e1(struct bnx2x *bp, int set)
+{
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	bnx2x_set_mac_addr_e1_gen(bp, set, bp->dev->dev_addr,
+				  (1 << bp->fp->cl_id), (BP_PORT(bp) ? 32 : 0),
+				  1);
+
+	/* Wait for a completion */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+}
+
+#ifdef BCM_CNIC
+/**
+ * Set iSCSI MAC(s) at the next enties in the CAM after the ETH
+ * MAC(s). This function will wait until the ramdord completion
+ * returns.
+ *
+ * @param bp driver handle
+ * @param set set or clear the CAM entry
+ *
+ * @return 0 if cussess, -ENODEV if ramrod doesn't return.
+ */
+static int bnx2x_set_iscsi_eth_mac_addr(struct bnx2x *bp, int set)
+{
+	u32 cl_bit_vec = (1 << BCM_ISCSI_ETH_CL_ID);
+
+	bp->set_mac_pending++;
+	smp_wmb();
+
+	/* Send a SET_MAC ramrod */
+	if (CHIP_IS_E1(bp))
+		bnx2x_set_mac_addr_e1_gen(bp, set, bp->iscsi_mac,
+				  cl_bit_vec, (BP_PORT(bp) ? 32 : 0) + 2,
+				  1);
+	else
+		/* CAM allocation for E1H
+		* unicasts: by func number
+		* multicast: 20+FUNC*20, 20 each
+		*/
+		bnx2x_set_mac_addr_e1h_gen(bp, set, bp->iscsi_mac,
+				   cl_bit_vec, E1H_FUNC_MAX + BP_FUNC(bp));
+
+	/* Wait for a completion when setting */
+	bnx2x_wait_ramrod(bp, 0, 0, &bp->set_mac_pending, set ? 0 : 1);
+
+	return 0;
+}
+#endif
+
 static int bnx2x_setup_leading(struct bnx2x *bp)
 {
 	int rc;
@@ -7289,6 +7492,10 @@
 	return rc;
 }
 
+#ifdef BCM_CNIC
+static int bnx2x_cnic_notify(struct bnx2x *bp, int cmd);
+static void bnx2x_setup_cnic_irq_info(struct bnx2x *bp);
+#endif
 
 /* must be called with rtnl_lock */
 static int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
@@ -7427,20 +7634,37 @@
 	if (CHIP_IS_E1H(bp))
 		if (bp->mf_config & FUNC_MF_CFG_FUNC_DISABLED) {
 			DP(NETIF_MSG_IFUP, "mf_cfg function disabled\n");
-			bp->state = BNX2X_STATE_DISABLED;
+			bp->flags |= MF_FUNC_DIS;
 		}
 
 	if (bp->state == BNX2X_STATE_OPEN) {
+#ifdef BCM_CNIC
+		/* Enable Timer scan */
+		REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + BP_PORT(bp)*4, 1);
+#endif
 		for_each_nondefault_queue(bp, i) {
 			rc = bnx2x_setup_multi(bp, i);
 			if (rc)
+#ifdef BCM_CNIC
+				goto load_error4;
+#else
 				goto load_error3;
+#endif
 		}
 
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp, 1);
+			bnx2x_set_eth_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp, 1);
+			bnx2x_set_eth_mac_addr_e1h(bp, 1);
+#ifdef BCM_CNIC
+		/* Set iSCSI L2 MAC */
+		mutex_lock(&bp->cnic_mutex);
+		if (bp->cnic_eth_dev.drv_state & CNIC_DRV_STATE_REGD) {
+			bnx2x_set_iscsi_eth_mac_addr(bp, 1);
+			bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
+		}
+		mutex_unlock(&bp->cnic_mutex);
+#endif
 	}
 
 	if (bp->port.pmf)
@@ -7481,9 +7705,19 @@
 	/* start the timer */
 	mod_timer(&bp->timer, jiffies + bp->current_interval);
 
+#ifdef BCM_CNIC
+	bnx2x_setup_cnic_irq_info(bp);
+	if (bp->state == BNX2X_STATE_OPEN)
+		bnx2x_cnic_notify(bp, CNIC_CTL_START_CMD);
+#endif
 
 	return 0;
 
+#ifdef BCM_CNIC
+load_error4:
+	/* Disable Timer scan */
+	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + BP_PORT(bp)*4, 0);
+#endif
 load_error3:
 	bnx2x_int_disable_sync(bp, 1);
 	if (!BP_NOMCP(bp)) {
@@ -7591,6 +7825,19 @@
 	REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, 0);
 	REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, 0);
 
+#ifdef BCM_CNIC
+	/* Disable Timer scan */
+	REG_WR(bp, TM_REG_EN_LINEAR0_TIMER + port*4, 0);
+	/*
+	 * Wait for at least 10ms and up to 2 second for the timers scan to
+	 * complete
+	 */
+	for (i = 0; i < 200; i++) {
+		msleep(10);
+		if (!REG_RD(bp, TM_REG_LIN0_SCAN_ON + port*4))
+			break;
+	}
+#endif
 	/* Clear ILT */
 	base = FUNC_ILT_BASE(func);
 	for (i = base; i < base + ILT_PER_FUNC; i++)
@@ -7657,6 +7904,9 @@
 	u32 reset_code = 0;
 	int i, cnt, rc;
 
+#ifdef BCM_CNIC
+	bnx2x_cnic_notify(bp, CNIC_CTL_STOP_CMD);
+#endif
 	bp->state = BNX2X_STATE_CLOSING_WAIT4_HALT;
 
 	/* Set "drop all" */
@@ -7703,7 +7953,7 @@
 		struct mac_configuration_cmd *config =
 						bnx2x_sp(bp, mcast_config);
 
-		bnx2x_set_mac_addr_e1(bp, 0);
+		bnx2x_set_eth_mac_addr_e1(bp, 0);
 
 		for (i = 0; i < config->hdr.length; i++)
 			CAM_INVALIDATE(config->config_table[i]);
@@ -7716,6 +7966,9 @@
 		config->hdr.client_id = bp->fp->cl_id;
 		config->hdr.reserved1 = 0;
 
+		bp->set_mac_pending++;
+		smp_wmb();
+
 		bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 			      U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
 			      U64_LO(bnx2x_sp_mapping(bp, mcast_config)), 0);
@@ -7723,13 +7976,22 @@
 	} else { /* E1H */
 		REG_WR(bp, NIG_REG_LLH0_FUNC_EN + port*8, 0);
 
-		bnx2x_set_mac_addr_e1h(bp, 0);
+		bnx2x_set_eth_mac_addr_e1h(bp, 0);
 
 		for (i = 0; i < MC_HASH_SIZE; i++)
 			REG_WR(bp, MC_HASH_OFFSET(bp, i), 0);
 
 		REG_WR(bp, MISC_REG_E1HMF_MODE, 0);
 	}
+#ifdef BCM_CNIC
+	/* Clear iSCSI L2 MAC */
+	mutex_lock(&bp->cnic_mutex);
+	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
+		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
+		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
+	}
+	mutex_unlock(&bp->cnic_mutex);
+#endif
 
 	if (unload_mode == UNLOAD_NORMAL)
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
@@ -8506,6 +8768,14 @@
 		       bp->link_params.req_flow_ctrl, bp->port.advertising);
 }
 
+static void __devinit bnx2x_set_mac_buf(u8 *mac_buf, u32 mac_lo, u16 mac_hi)
+{
+	mac_hi = cpu_to_be16(mac_hi);
+	mac_lo = cpu_to_be32(mac_lo);
+	memcpy(mac_buf, &mac_hi, sizeof(mac_hi));
+	memcpy(mac_buf + sizeof(mac_hi), &mac_lo, sizeof(mac_lo));
+}
+
 static void __devinit bnx2x_get_port_hwinfo(struct bnx2x *bp)
 {
 	int port = BP_PORT(bp);
@@ -8587,14 +8857,15 @@
 
 	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_upper);
 	val = SHMEM_RD(bp, dev_info.port_hw_config[port].mac_lower);
-	bp->dev->dev_addr[0] = (u8)(val2 >> 8 & 0xff);
-	bp->dev->dev_addr[1] = (u8)(val2 & 0xff);
-	bp->dev->dev_addr[2] = (u8)(val >> 24 & 0xff);
-	bp->dev->dev_addr[3] = (u8)(val >> 16 & 0xff);
-	bp->dev->dev_addr[4] = (u8)(val >> 8  & 0xff);
-	bp->dev->dev_addr[5] = (u8)(val & 0xff);
+	bnx2x_set_mac_buf(bp->dev->dev_addr, val, val2);
 	memcpy(bp->link_params.mac_addr, bp->dev->dev_addr, ETH_ALEN);
 	memcpy(bp->dev->perm_addr, bp->dev->dev_addr, ETH_ALEN);
+
+#ifdef BCM_CNIC
+	val2 = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_upper);
+	val = SHMEM_RD(bp, dev_info.port_hw_config[port].iscsi_mac_lower);
+	bnx2x_set_mac_buf(bp->iscsi_mac, val, val2);
+#endif
 }
 
 static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp)
@@ -8690,6 +8961,10 @@
 	smp_wmb(); /* Ensure that bp->intr_sem update is SMP-safe */
 
 	mutex_init(&bp->port.phy_mutex);
+	mutex_init(&bp->fw_mb_mutex);
+#ifdef BCM_CNIC
+	mutex_init(&bp->cnic_mutex);
+#endif
 
 	INIT_DELAYED_WORK(&bp->sp_task, bnx2x_sp_task);
 	INIT_WORK(&bp->reset_task, bnx2x_reset_task);
@@ -8765,20 +9040,23 @@
 	cmd->supported = bp->port.supported;
 	cmd->advertising = bp->port.advertising;
 
-	if (netif_carrier_ok(dev)) {
+	if ((bp->state == BNX2X_STATE_OPEN) &&
+	    !(bp->flags & MF_FUNC_DIS) &&
+	    (bp->link_vars.link_up)) {
 		cmd->speed = bp->link_vars.line_speed;
 		cmd->duplex = bp->link_vars.duplex;
-	} else {
-		cmd->speed = bp->link_params.req_line_speed;
-		cmd->duplex = bp->link_params.req_duplex;
-	}
-	if (IS_E1HMF(bp)) {
-		u16 vn_max_rate;
+		if (IS_E1HMF(bp)) {
+			u16 vn_max_rate;
 
-		vn_max_rate = ((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
+			vn_max_rate =
+				((bp->mf_config & FUNC_MF_CFG_MAX_BW_MASK) >>
 				FUNC_MF_CFG_MAX_BW_SHIFT) * 100;
-		if (vn_max_rate < cmd->speed)
-			cmd->speed = vn_max_rate;
+			if (vn_max_rate < cmd->speed)
+				cmd->speed = vn_max_rate;
+		}
+	} else {
+		cmd->speed = -1;
+		cmd->duplex = -1;
 	}
 
 	if (bp->link_params.switch_cfg == SWITCH_CFG_10G) {
@@ -9163,6 +9441,9 @@
 {
 	struct bnx2x *bp = netdev_priv(dev);
 
+	if (bp->flags & MF_FUNC_DIS)
+		return 0;
+
 	return bp->link_vars.link_up;
 }
 
@@ -9567,8 +9848,7 @@
 
 	} else if (eeprom->magic == 0x50485952) {
 		/* 'PHYR' (0x50485952): re-init link after FW upgrade */
-		if ((bp->state == BNX2X_STATE_OPEN) ||
-		    (bp->state == BNX2X_STATE_DISABLED)) {
+		if (bp->state == BNX2X_STATE_OPEN) {
 			bnx2x_acquire_phy_lock(bp);
 			rc |= bnx2x_link_reset(&bp->link_params,
 					       &bp->link_vars, 1);
@@ -9818,11 +10098,6 @@
 	{ "idle check (online)" }
 };
 
-static int bnx2x_self_test_count(struct net_device *dev)
-{
-	return BNX2X_NUM_TESTS;
-}
-
 static int bnx2x_test_registers(struct bnx2x *bp)
 {
 	int idx, i, rc = -ENODEV;
@@ -10223,14 +10498,16 @@
 	config->hdr.client_id = bp->fp->cl_id;
 	config->hdr.reserved1 = 0;
 
+	bp->set_mac_pending++;
+	smp_wmb();
 	rc = bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 			   U64_HI(bnx2x_sp_mapping(bp, mac_config)),
 			   U64_LO(bnx2x_sp_mapping(bp, mac_config)), 0);
 	if (rc == 0) {
-		bp->set_mac_pending++;
 		for (i = 0; i < 10; i++) {
 			if (!bp->set_mac_pending)
 				break;
+			smp_rmb();
 			msleep_interruptible(10);
 		}
 		if (i == 10)
@@ -10264,7 +10541,7 @@
 		/* disable input for TX port IF */
 		REG_WR(bp, NIG_REG_EGRESS_UMP0_IN_EN + port*4, 0);
 
-		link_up = bp->link_vars.link_up;
+		link_up = (bnx2x_link_test(bp) == 0);
 		bnx2x_nic_unload(bp, UNLOAD_NORMAL);
 		bnx2x_nic_load(bp, LOAD_DIAG);
 		/* wait until link state is restored */
@@ -10436,6 +10713,36 @@
 #define IS_E1HMF_MODE_STAT(bp) \
 			(IS_E1HMF(bp) && !(bp->msglevel & BNX2X_MSG_STATS))
 
+static int bnx2x_get_sset_count(struct net_device *dev, int stringset)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int i, num_stats;
+
+	switch(stringset) {
+	case ETH_SS_STATS:
+		if (is_multi(bp)) {
+			num_stats = BNX2X_NUM_Q_STATS * bp->num_rx_queues;
+			if (!IS_E1HMF_MODE_STAT(bp))
+				num_stats += BNX2X_NUM_STATS;
+		} else {
+			if (IS_E1HMF_MODE_STAT(bp)) {
+				num_stats = 0;
+				for (i = 0; i < BNX2X_NUM_STATS; i++)
+					if (IS_FUNC_STAT(i))
+						num_stats++;
+			} else
+				num_stats = BNX2X_NUM_STATS;
+		}
+		return num_stats;
+
+	case ETH_SS_TEST:
+		return BNX2X_NUM_TESTS;
+
+	default:
+		return -EINVAL;
+	}
+}
+
 static void bnx2x_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
 {
 	struct bnx2x *bp = netdev_priv(dev);
@@ -10473,28 +10780,6 @@
 	}
 }
 
-static int bnx2x_get_stats_count(struct net_device *dev)
-{
-	struct bnx2x *bp = netdev_priv(dev);
-	int i, num_stats;
-
-	if (is_multi(bp)) {
-		num_stats = BNX2X_NUM_Q_STATS * bp->num_rx_queues;
-		if (!IS_E1HMF_MODE_STAT(bp))
-			num_stats += BNX2X_NUM_STATS;
-	} else {
-		if (IS_E1HMF_MODE_STAT(bp)) {
-			num_stats = 0;
-			for (i = 0; i < BNX2X_NUM_STATS; i++)
-				if (IS_FUNC_STAT(i))
-					num_stats++;
-		} else
-			num_stats = BNX2X_NUM_STATS;
-	}
-
-	return num_stats;
-}
-
 static void bnx2x_get_ethtool_stats(struct net_device *dev,
 				    struct ethtool_stats *stats, u64 *buf)
 {
@@ -10570,7 +10855,6 @@
 static int bnx2x_phys_id(struct net_device *dev, u32 data)
 {
 	struct bnx2x *bp = netdev_priv(dev);
-	int port = BP_PORT(bp);
 	int i;
 
 	if (!netif_running(dev))
@@ -10584,13 +10868,10 @@
 
 	for (i = 0; i < (data * 2); i++) {
 		if ((i % 2) == 0)
-			bnx2x_set_led(bp, port, LED_MODE_OPER, SPEED_1000,
-				      bp->link_params.hw_led_mode,
-				      bp->link_params.chip_id);
+			bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
+				      SPEED_1000);
 		else
-			bnx2x_set_led(bp, port, LED_MODE_OFF, 0,
-				      bp->link_params.hw_led_mode,
-				      bp->link_params.chip_id);
+			bnx2x_set_led(&bp->link_params, LED_MODE_OFF, 0);
 
 		msleep_interruptible(500);
 		if (signal_pending(current))
@@ -10598,10 +10879,8 @@
 	}
 
 	if (bp->link_vars.link_up)
-		bnx2x_set_led(bp, port, LED_MODE_OPER,
-			      bp->link_vars.line_speed,
-			      bp->link_params.hw_led_mode,
-			      bp->link_params.chip_id);
+		bnx2x_set_led(&bp->link_params, LED_MODE_OPER,
+			      bp->link_vars.line_speed);
 
 	return 0;
 }
@@ -10637,11 +10916,10 @@
 	.set_sg			= ethtool_op_set_sg,
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= bnx2x_set_tso,
-	.self_test_count	= bnx2x_self_test_count,
 	.self_test		= bnx2x_self_test,
+	.get_sset_count		= bnx2x_get_sset_count,
 	.get_strings		= bnx2x_get_strings,
 	.phys_id		= bnx2x_phys_id,
-	.get_stats_count	= bnx2x_get_stats_count,
 	.get_ethtool_stats	= bnx2x_get_ethtool_stats,
 };
 
@@ -11321,6 +11599,9 @@
 			config->hdr.client_id = bp->fp->cl_id;
 			config->hdr.reserved1 = 0;
 
+			bp->set_mac_pending++;
+			smp_wmb();
+
 			bnx2x_sp_post(bp, RAMROD_CMD_ID_ETH_SET_MAC, 0,
 				   U64_HI(bnx2x_sp_mapping(bp, mcast_config)),
 				   U64_LO(bnx2x_sp_mapping(bp, mcast_config)),
@@ -11370,9 +11651,9 @@
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev)) {
 		if (CHIP_IS_E1(bp))
-			bnx2x_set_mac_addr_e1(bp, 1);
+			bnx2x_set_eth_mac_addr_e1(bp, 1);
 		else
-			bnx2x_set_mac_addr_e1h(bp, 1);
+			bnx2x_set_eth_mac_addr_e1h(bp, 1);
 	}
 
 	return 0;
@@ -12276,4 +12557,287 @@
 module_init(bnx2x_init);
 module_exit(bnx2x_cleanup);
 
+#ifdef BCM_CNIC
+
+/* count denotes the number of new completions we have seen */
+static void bnx2x_cnic_sp_post(struct bnx2x *bp, int count)
+{
+	struct eth_spe *spe;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+	bp->cnic_spq_pending -= count;
+
+	for (; bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending;
+	     bp->cnic_spq_pending++) {
+
+		if (!bp->cnic_kwq_pending)
+			break;
+
+		spe = bnx2x_sp_get_next(bp);
+		*spe = *bp->cnic_kwq_cons;
+
+		bp->cnic_kwq_pending--;
+
+		DP(NETIF_MSG_TIMER, "pending on SPQ %d, on KWQ %d count %d\n",
+		   bp->cnic_spq_pending, bp->cnic_kwq_pending, count);
+
+		if (bp->cnic_kwq_cons == bp->cnic_kwq_last)
+			bp->cnic_kwq_cons = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_cons++;
+	}
+	bnx2x_sp_prod_update(bp);
+	spin_unlock_bh(&bp->spq_lock);
+}
+
+static int bnx2x_cnic_sp_queue(struct net_device *dev,
+			       struct kwqe_16 *kwqes[], u32 count)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int i;
+
+#ifdef BNX2X_STOP_ON_ERROR
+	if (unlikely(bp->panic))
+		return -EIO;
+#endif
+
+	spin_lock_bh(&bp->spq_lock);
+
+	for (i = 0; i < count; i++) {
+		struct eth_spe *spe = (struct eth_spe *)kwqes[i];
+
+		if (bp->cnic_kwq_pending == MAX_SP_DESC_CNT)
+			break;
+
+		*bp->cnic_kwq_prod = *spe;
+
+		bp->cnic_kwq_pending++;
+
+		DP(NETIF_MSG_TIMER, "L5 SPQE %x %x %x:%x pos %d\n",
+		   spe->hdr.conn_and_cmd_data, spe->hdr.type,
+		   spe->data.mac_config_addr.hi,
+		   spe->data.mac_config_addr.lo,
+		   bp->cnic_kwq_pending);
+
+		if (bp->cnic_kwq_prod == bp->cnic_kwq_last)
+			bp->cnic_kwq_prod = bp->cnic_kwq;
+		else
+			bp->cnic_kwq_prod++;
+	}
+
+	spin_unlock_bh(&bp->spq_lock);
+
+	if (bp->cnic_spq_pending < bp->cnic_eth_dev.max_kwqe_pending)
+		bnx2x_cnic_sp_post(bp, 0);
+
+	return i;
+}
+
+static int bnx2x_cnic_ctl_send(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	mutex_lock(&bp->cnic_mutex);
+	c_ops = bp->cnic_ops;
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	mutex_unlock(&bp->cnic_mutex);
+
+	return rc;
+}
+
+static int bnx2x_cnic_ctl_send_bh(struct bnx2x *bp, struct cnic_ctl_info *ctl)
+{
+	struct cnic_ops *c_ops;
+	int rc = 0;
+
+	rcu_read_lock();
+	c_ops = rcu_dereference(bp->cnic_ops);
+	if (c_ops)
+		rc = c_ops->cnic_ctl(bp->cnic_data, ctl);
+	rcu_read_unlock();
+
+	return rc;
+}
+
+/*
+ * for commands that have no data
+ */
+static int bnx2x_cnic_notify(struct bnx2x *bp, int cmd)
+{
+	struct cnic_ctl_info ctl = {0};
+
+	ctl.cmd = cmd;
+
+	return bnx2x_cnic_ctl_send(bp, &ctl);
+}
+
+static void bnx2x_cnic_cfc_comp(struct bnx2x *bp, int cid)
+{
+	struct cnic_ctl_info ctl;
+
+	/* first we tell CNIC and only then we count this as a completion */
+	ctl.cmd = CNIC_CTL_COMPLETION_CMD;
+	ctl.data.comp.cid = cid;
+
+	bnx2x_cnic_ctl_send_bh(bp, &ctl);
+	bnx2x_cnic_sp_post(bp, 1);
+}
+
+static int bnx2x_drv_ctl(struct net_device *dev, struct drv_ctl_info *ctl)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	int rc = 0;
+
+	switch (ctl->cmd) {
+	case DRV_CTL_CTXTBL_WR_CMD: {
+		u32 index = ctl->data.io.offset;
+		dma_addr_t addr = ctl->data.io.dma_addr;
+
+		bnx2x_ilt_wr(bp, index, addr);
+		break;
+	}
+
+	case DRV_CTL_COMPLETION_CMD: {
+		int count = ctl->data.comp.comp_count;
+
+		bnx2x_cnic_sp_post(bp, count);
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_START_L2_CMD: {
+		u32 cli = ctl->data.ring.client_id;
+
+		bp->rx_mode_cl_mask |= (1 << cli);
+		bnx2x_set_storm_rx_mode(bp);
+		break;
+	}
+
+	/* rtnl_lock is held.  */
+	case DRV_CTL_STOP_L2_CMD: {
+		u32 cli = ctl->data.ring.client_id;
+
+		bp->rx_mode_cl_mask &= ~(1 << cli);
+		bnx2x_set_storm_rx_mode(bp);
+		break;
+	}
+
+	default:
+		BNX2X_ERR("unknown command %x\n", ctl->cmd);
+		rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+static void bnx2x_setup_cnic_irq_info(struct bnx2x *bp)
+{
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (bp->flags & USING_MSIX_FLAG) {
+		cp->drv_state |= CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags |= CNIC_IRQ_FL_MSIX;
+		cp->irq_arr[0].vector = bp->msix_table[1].vector;
+	} else {
+		cp->drv_state &= ~CNIC_DRV_STATE_USING_MSIX;
+		cp->irq_arr[0].irq_flags &= ~CNIC_IRQ_FL_MSIX;
+	}
+	cp->irq_arr[0].status_blk = bp->cnic_sb;
+	cp->irq_arr[0].status_blk_num = CNIC_SB_ID(bp);
+	cp->irq_arr[1].status_blk = bp->def_status_blk;
+	cp->irq_arr[1].status_blk_num = DEF_SB_ID;
+
+	cp->num_irq = 2;
+}
+
+static int bnx2x_register_cnic(struct net_device *dev, struct cnic_ops *ops,
+			       void *data)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	if (ops == NULL)
+		return -EINVAL;
+
+	if (atomic_read(&bp->intr_sem) != 0)
+		return -EBUSY;
+
+	bp->cnic_kwq = kzalloc(PAGE_SIZE, GFP_KERNEL);
+	if (!bp->cnic_kwq)
+		return -ENOMEM;
+
+	bp->cnic_kwq_cons = bp->cnic_kwq;
+	bp->cnic_kwq_prod = bp->cnic_kwq;
+	bp->cnic_kwq_last = bp->cnic_kwq + MAX_SP_DESC_CNT;
+
+	bp->cnic_spq_pending = 0;
+	bp->cnic_kwq_pending = 0;
+
+	bp->cnic_data = data;
+
+	cp->num_irq = 0;
+	cp->drv_state = CNIC_DRV_STATE_REGD;
+
+	bnx2x_init_sb(bp, bp->cnic_sb, bp->cnic_sb_mapping, CNIC_SB_ID(bp));
+
+	bnx2x_setup_cnic_irq_info(bp);
+	bnx2x_set_iscsi_eth_mac_addr(bp, 1);
+	bp->cnic_flags |= BNX2X_CNIC_FLAG_MAC_SET;
+	rcu_assign_pointer(bp->cnic_ops, ops);
+
+	return 0;
+}
+
+static int bnx2x_unregister_cnic(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	mutex_lock(&bp->cnic_mutex);
+	if (bp->cnic_flags & BNX2X_CNIC_FLAG_MAC_SET) {
+		bp->cnic_flags &= ~BNX2X_CNIC_FLAG_MAC_SET;
+		bnx2x_set_iscsi_eth_mac_addr(bp, 0);
+	}
+	cp->drv_state = 0;
+	rcu_assign_pointer(bp->cnic_ops, NULL);
+	mutex_unlock(&bp->cnic_mutex);
+	synchronize_rcu();
+	kfree(bp->cnic_kwq);
+	bp->cnic_kwq = NULL;
+
+	return 0;
+}
+
+struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev)
+{
+	struct bnx2x *bp = netdev_priv(dev);
+	struct cnic_eth_dev *cp = &bp->cnic_eth_dev;
+
+	cp->drv_owner = THIS_MODULE;
+	cp->chip_id = CHIP_ID(bp);
+	cp->pdev = bp->pdev;
+	cp->io_base = bp->regview;
+	cp->io_base2 = bp->doorbells;
+	cp->max_kwqe_pending = 8;
+	cp->ctx_blk_size = CNIC_CTX_PER_ILT * sizeof(union cdu_context);
+	cp->ctx_tbl_offset = FUNC_ILT_BASE(BP_FUNC(bp)) + 1;
+	cp->ctx_tbl_len = CNIC_ILT_LINES;
+	cp->starting_cid = BCM_CNIC_CID_START;
+	cp->drv_submit_kwqes_16 = bnx2x_cnic_sp_queue;
+	cp->drv_ctl = bnx2x_drv_ctl;
+	cp->drv_register_cnic = bnx2x_register_cnic;
+	cp->drv_unregister_cnic = bnx2x_unregister_cnic;
+
+	return cp;
+}
+EXPORT_SYMBOL(bnx2x_cnic_probe);
+
+#endif /* BCM_CNIC */
 
diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h
index aa76cba..b668173 100644
--- a/drivers/net/bnx2x_reg.h
+++ b/drivers/net/bnx2x_reg.h
@@ -4772,18 +4772,28 @@
 #define PCI_ID_VAL2					0x438
 
 
-#define MDIO_REG_BANK_CL73_IEEEB0			0x0
-#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL		0x0
+#define MDIO_REG_BANK_CL73_IEEEB0	0x0
+#define MDIO_CL73_IEEEB0_CL73_AN_CONTROL	0x0
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN	0x0200
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN		0x1000
 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST	0x8000
 
-#define MDIO_REG_BANK_CL73_IEEEB1			0x10
-#define MDIO_CL73_IEEEB1_AN_ADV2				0x01
+#define MDIO_REG_BANK_CL73_IEEEB1	0x10
+#define MDIO_CL73_IEEEB1_AN_ADV1		0x00
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE			0x0400
+#define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC		0x0800
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH		0x0C00
+#define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK		0x0C00
+#define MDIO_CL73_IEEEB1_AN_ADV2		0x01
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M		0x0000
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX		0x0020
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4		0x0040
 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR		0x0080
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1		0x03
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE		0x0400
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC		0x0800
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH		0x0C00
+#define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK		0x0C00
 
 #define MDIO_REG_BANK_RX0				0x80b0
 #define MDIO_RX0_RX_STATUS				0x10
@@ -4910,6 +4920,8 @@
 
 
 #define MDIO_REG_BANK_10G_PARALLEL_DETECT		0x8130
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS		0x10
+#define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK		0x8000
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL		0x11
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN	0x1
 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK		0x13
@@ -4934,6 +4946,8 @@
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G			0x0010
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M			0x0008
 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M			0x0000
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2			0x15
+#define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED 		0x0002
 #define MDIO_SERDES_DIGITAL_MISC1				0x18
 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK			0xE000
 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M			0x0000
@@ -5115,6 +5129,7 @@
 #define MDIO_PMA_REG_8481_LED1_MASK	0xa82c
 #define MDIO_PMA_REG_8481_LED2_MASK	0xa82f
 #define MDIO_PMA_REG_8481_LED3_MASK	0xa832
+#define MDIO_PMA_REG_8481_LED3_BLINK	0xa834
 #define MDIO_PMA_REG_8481_SIGNAL_MASK	0xa835
 #define MDIO_PMA_REG_8481_LINK_SIGNAL	0xa83b
 
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index c3fa31c..1d05819 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1956,7 +1956,7 @@
 	struct port *port, *prev_port, *temp_port;
 	struct aggregator *aggregator, *new_aggregator, *temp_aggregator;
 	int select_new_active_agg = 0;
-	
+
 	// find the aggregator related to this slave
 	aggregator = &(SLAVE_AD_INFO(slave).aggregator);
 
@@ -2024,7 +2024,7 @@
 
 				// clear the aggregator
 				ad_clear_agg(aggregator);
-				
+
 				if (select_new_active_agg) {
 					ad_agg_selection_logic(__get_first_agg(port));
 				}
@@ -2075,7 +2075,7 @@
 			}
 		}
 	}
-	port->slave=NULL;	
+	port->slave=NULL;
 }
 
 /**
@@ -2301,7 +2301,7 @@
 }
 
 /*
- * set link state for bonding master: if we have an active 
+ * set link state for bonding master: if we have an active
  * aggregator, we're up, if not, we're down.  Presumes that we cannot
  * have an active aggregator if there are no slaves with link up.
  *
@@ -2395,7 +2395,7 @@
 		goto out;
 	}
 
-	slave_agg_no = bond->xmit_hash_policy(skb, dev, slaves_in_agg);
+	slave_agg_no = bond->xmit_hash_policy(skb, slaves_in_agg);
 
 	bond_for_each_slave(bond, slave, i) {
 		struct aggregator *agg = SLAVE_AD_INFO(slave).port.aggregator;
@@ -2445,9 +2445,6 @@
 	struct slave *slave = NULL;
 	int ret = NET_RX_DROP;
 
-	if (dev_net(dev) != &init_net)
-		goto out;
-
 	if (!(dev->flags & IFF_MASTER))
 		goto out;
 
@@ -2468,4 +2465,3 @@
 
 	return ret;
 }
-
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 9b5936f..0d30d1e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -355,9 +355,6 @@
 	struct arp_pkt *arp = (struct arp_pkt *)skb->data;
 	int res = NET_RX_DROP;
 
-	if (dev_net(bond_dev) != &init_net)
-		goto out;
-
 	while (bond_dev->priv_flags & IFF_802_1Q_VLAN)
 		bond_dev = vlan_dev_real_dev(bond_dev);
 
diff --git a/drivers/net/bonding/bond_ipv6.c b/drivers/net/bonding/bond_ipv6.c
index 83921ab..b72e1dc 100644
--- a/drivers/net/bonding/bond_ipv6.c
+++ b/drivers/net/bonding/bond_ipv6.c
@@ -25,6 +25,7 @@
 #include <net/ipv6.h>
 #include <net/ndisc.h>
 #include <net/addrconf.h>
+#include <net/netns/generic.h>
 #include "bonding.h"
 
 /*
@@ -152,11 +153,9 @@
 	struct net_device *vlan_dev, *event_dev = ifa->idev->dev;
 	struct bonding *bond;
 	struct vlan_entry *vlan;
+	struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
 
-	if (dev_net(event_dev) != &init_net)
-		return NOTIFY_DONE;
-
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 40fb5ee..ecea6c2 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -75,6 +75,7 @@
 #include <linux/jiffies.h>
 #include <net/route.h>
 #include <net/net_namespace.h>
+#include <net/netns/generic.h>
 #include "bonding.h"
 #include "bond_3ad.h"
 #include "bond_alb.h"
@@ -94,6 +95,7 @@
 static int use_carrier	= 1;
 static char *mode;
 static char *primary;
+static char *primary_reselect;
 static char *lacp_rate;
 static char *ad_select;
 static char *xmit_hash_policy;
@@ -126,6 +128,14 @@
 		       "6 for balance-alb");
 module_param(primary, charp, 0);
 MODULE_PARM_DESC(primary, "Primary network device to use");
+module_param(primary_reselect, charp, 0);
+MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
+				   "once it comes up; "
+				   "0 for always (default), "
+				   "1 for only if speed of primary is "
+				   "better, "
+				   "2 for only on active slave "
+				   "failure");
 module_param(lacp_rate, charp, 0);
 MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
 			    "(slow/fast)");
@@ -148,11 +158,7 @@
 static const char * const version =
 	DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";
 
-LIST_HEAD(bond_dev_list);
-
-#ifdef CONFIG_PROC_FS
-static struct proc_dir_entry *bond_proc_dir;
-#endif
+int bond_net_id;
 
 static __be32 arp_target[BOND_MAX_ARP_TARGETS];
 static int arp_ip_count;
@@ -200,6 +206,13 @@
 {	NULL,			-1},
 };
 
+const struct bond_parm_tbl pri_reselect_tbl[] = {
+{	"always",		BOND_PRI_RESELECT_ALWAYS},
+{	"better",		BOND_PRI_RESELECT_BETTER},
+{	"failure",		BOND_PRI_RESELECT_FAILURE},
+{	NULL,			-1},
+};
+
 struct bond_parm_tbl ad_select_tbl[] = {
 {	"stable",	BOND_AD_STABLE},
 {	"bandwidth",	BOND_AD_BANDWIDTH},
@@ -211,7 +224,7 @@
 
 static void bond_send_gratuitous_arp(struct bonding *bond);
 static int bond_init(struct net_device *bond_dev);
-static void bond_deinit(struct net_device *bond_dev);
+static void bond_uninit(struct net_device *bond_dev);
 
 /*---------------------------- General routines -----------------------------*/
 
@@ -1070,6 +1083,25 @@
 
 }
 
+static bool bond_should_change_active(struct bonding *bond)
+{
+	struct slave *prim = bond->primary_slave;
+	struct slave *curr = bond->curr_active_slave;
+
+	if (!prim || !curr || curr->link != BOND_LINK_UP)
+		return true;
+	if (bond->force_primary) {
+		bond->force_primary = false;
+		return true;
+	}
+	if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
+	    (prim->speed < curr->speed ||
+	     (prim->speed == curr->speed && prim->duplex <= curr->duplex)))
+		return false;
+	if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
+		return false;
+	return true;
+}
 
 /**
  * find_best_interface - select the best available slave to be the active one
@@ -1084,7 +1116,7 @@
 	int mintime = bond->params.updelay;
 	int i;
 
-	new_active = old_active = bond->curr_active_slave;
+	new_active = bond->curr_active_slave;
 
 	if (!new_active) { /* there were no active slaves left */
 		if (bond->slave_cnt > 0)   /* found one slave */
@@ -1094,7 +1126,8 @@
 	}
 
 	if ((bond->primary_slave) &&
-	    bond->primary_slave->link == BOND_LINK_UP) {
+	    bond->primary_slave->link == BOND_LINK_UP &&
+	    bond_should_change_active(bond)) {
 		new_active = bond->primary_slave;
 	}
 
@@ -1678,8 +1711,10 @@
 
 	if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
 		/* if there is a primary slave, remember it */
-		if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
+		if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
 			bond->primary_slave = new_slave;
+			bond->force_primary = true;
+		}
 	}
 
 	write_lock_bh(&bond->curr_slave_lock);
@@ -1965,25 +2000,6 @@
 }
 
 /*
-* Destroy a bonding device.
-* Must be under rtnl_lock when this function is called.
-*/
-static void bond_uninit(struct net_device *bond_dev)
-{
-	struct bonding *bond = netdev_priv(bond_dev);
-
-	bond_deinit(bond_dev);
-	bond_destroy_sysfs_entry(bond);
-
-	if (bond->wq)
-		destroy_workqueue(bond->wq);
-
-	netif_addr_lock_bh(bond_dev);
-	bond_mc_list_destroy(bond);
-	netif_addr_unlock_bh(bond_dev);
-}
-
-/*
 * First release a slave and than destroy the bond if no more slaves are left.
 * Must be under rtnl_lock when this function is called.
 */
@@ -2567,7 +2583,7 @@
 		fl.fl4_dst = targets[i];
 		fl.fl4_tos = RTO_ONLINK;
 
-		rv = ip_route_output_key(&init_net, &rt, &fl);
+		rv = ip_route_output_key(dev_net(bond->dev), &rt, &fl);
 		if (rv) {
 			if (net_ratelimit()) {
 				pr_warning(DRV_NAME
@@ -2675,9 +2691,6 @@
 	unsigned char *arp_ptr;
 	__be32 sip, tip;
 
-	if (dev_net(dev) != &init_net)
-		goto out;
-
 	if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
 		goto out;
 
@@ -3201,11 +3214,14 @@
 	}
 
 	if (USES_PRIMARY(bond->params.mode)) {
-		seq_printf(seq, "Primary Slave: %s\n",
+		seq_printf(seq, "Primary Slave: %s",
 			   (bond->primary_slave) ?
 			   bond->primary_slave->dev->name : "None");
+		if (bond->primary_slave)
+			seq_printf(seq, " (primary_reselect %s)",
+		   pri_reselect_tbl[bond->params.primary_reselect].modename);
 
-		seq_printf(seq, "Currently Active Slave: %s\n",
+		seq_printf(seq, "\nCurrently Active Slave: %s\n",
 			   (curr) ? curr->dev->name : "None");
 	}
 
@@ -3334,13 +3350,14 @@
 	.release = seq_release,
 };
 
-static int bond_create_proc_entry(struct bonding *bond)
+static void bond_create_proc_entry(struct bonding *bond)
 {
 	struct net_device *bond_dev = bond->dev;
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
 
-	if (bond_proc_dir) {
+	if (bn->proc_dir) {
 		bond->proc_entry = proc_create_data(bond_dev->name,
-						    S_IRUGO, bond_proc_dir,
+						    S_IRUGO, bn->proc_dir,
 						    &bond_info_fops, bond);
 		if (bond->proc_entry == NULL)
 			pr_warning(DRV_NAME
@@ -3349,14 +3366,15 @@
 		else
 			memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
 	}
-
-	return 0;
 }
 
 static void bond_remove_proc_entry(struct bonding *bond)
 {
-	if (bond_proc_dir && bond->proc_entry) {
-		remove_proc_entry(bond->proc_file_name, bond_proc_dir);
+	struct net_device *bond_dev = bond->dev;
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
+
+	if (bn->proc_dir && bond->proc_entry) {
+		remove_proc_entry(bond->proc_file_name, bn->proc_dir);
 		memset(bond->proc_file_name, 0, IFNAMSIZ);
 		bond->proc_entry = NULL;
 	}
@@ -3365,11 +3383,11 @@
 /* Create the bonding directory under /proc/net, if doesn't exist yet.
  * Caller must hold rtnl_lock.
  */
-static void bond_create_proc_dir(void)
+static void bond_create_proc_dir(struct bond_net *bn)
 {
-	if (!bond_proc_dir) {
-		bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
-		if (!bond_proc_dir)
+	if (!bn->proc_dir) {
+		bn->proc_dir = proc_mkdir(DRV_NAME, bn->net->proc_net);
+		if (!bn->proc_dir)
 			pr_warning(DRV_NAME
 				": Warning: cannot create /proc/net/%s\n",
 				DRV_NAME);
@@ -3379,17 +3397,17 @@
 /* Destroy the bonding directory under /proc/net, if empty.
  * Caller must hold rtnl_lock.
  */
-static void bond_destroy_proc_dir(void)
+static void bond_destroy_proc_dir(struct bond_net *bn)
 {
-	if (bond_proc_dir) {
-		remove_proc_entry(DRV_NAME, init_net.proc_net);
-		bond_proc_dir = NULL;
+	if (bn->proc_dir) {
+		remove_proc_entry(DRV_NAME, bn->net->proc_net);
+		bn->proc_dir = NULL;
 	}
 }
 
 #else /* !CONFIG_PROC_FS */
 
-static int bond_create_proc_entry(struct bonding *bond)
+static void bond_create_proc_entry(struct bonding *bond)
 {
 }
 
@@ -3397,11 +3415,11 @@
 {
 }
 
-static void bond_create_proc_dir(void)
+static void bond_create_proc_dir(struct bond_net *bn)
 {
 }
 
-static void bond_destroy_proc_dir(void)
+static void bond_destroy_proc_dir(struct bond_net *bn)
 {
 }
 
@@ -3418,9 +3436,6 @@
 	bond_remove_proc_entry(bond);
 	bond_create_proc_entry(bond);
 
-	bond_destroy_sysfs_entry(bond);
-	bond_create_sysfs_entry(bond);
-
 	return NOTIFY_DONE;
 }
 
@@ -3432,9 +3447,6 @@
 	switch (event) {
 	case NETDEV_CHANGENAME:
 		return bond_event_changename(event_bond);
-	case NETDEV_UNREGISTER:
-		bond_release_all(event_bond->dev);
-		break;
 	default:
 		break;
 	}
@@ -3526,9 +3538,6 @@
 {
 	struct net_device *event_dev = (struct net_device *)ptr;
 
-	if (dev_net(event_dev) != &init_net)
-		return NOTIFY_DONE;
-
 	pr_debug("event_dev: %s, event: %lx\n",
 		(event_dev ? event_dev->name : "None"),
 		event);
@@ -3561,13 +3570,11 @@
 {
 	struct in_ifaddr *ifa = ptr;
 	struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
+	struct bond_net *bn = net_generic(dev_net(event_dev), bond_net_id);
 	struct bonding *bond;
 	struct vlan_entry *vlan;
 
-	if (dev_net(ifa->ifa_dev->dev) != &init_net)
-		return NOTIFY_DONE;
-
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (bond->dev == event_dev) {
 			switch (event) {
 			case NETDEV_UP:
@@ -3657,8 +3664,7 @@
  * Hash for the output device based upon layer 2 and layer 3 data. If
  * the packet is not IP mimic bond_xmit_hash_policy_l2()
  */
-static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
-				     struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 	struct iphdr *iph = ip_hdr(skb);
@@ -3676,8 +3682,7 @@
  * the packet is a frag or not TCP or UDP, just use layer 3 data.  If it is
  * altogether not IP, mimic bond_xmit_hash_policy_l2()
  */
-static int bond_xmit_hash_policy_l34(struct sk_buff *skb,
-				    struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 	struct iphdr *iph = ip_hdr(skb);
@@ -3701,8 +3706,7 @@
 /*
  * Hash for the output device based upon layer 2 data
  */
-static int bond_xmit_hash_policy_l2(struct sk_buff *skb,
-				   struct net_device *bond_dev, int count)
+static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
 {
 	struct ethhdr *data = (struct ethhdr *)skb->data;
 
@@ -3939,7 +3943,7 @@
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);
+	slave_dev = dev_get_by_name(dev_net(bond_dev), ifr->ifr_slave);
 
 	pr_debug("slave_dev=%p: \n", slave_dev);
 
@@ -4295,7 +4299,7 @@
 	if (!BOND_IS_OK(bond))
 		goto out;
 
-	slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);
+	slave_no = bond->xmit_hash_policy(skb, bond->slave_cnt);
 
 	bond_for_each_slave(bond, slave, i) {
 		slave_no--;
@@ -4576,37 +4580,29 @@
 		cancel_delayed_work(&bond->ad_work);
 }
 
-/* De-initialize device specific data.
- * Caller must hold rtnl_lock.
- */
-static void bond_deinit(struct net_device *bond_dev)
+/*
+* Destroy a bonding device.
+* Must be under rtnl_lock when this function is called.
+*/
+static void bond_uninit(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
 
+	/* Release the bonded slaves */
+	bond_release_all(bond_dev);
+
 	list_del(&bond->bond_list);
 
 	bond_work_cancel_all(bond);
 
 	bond_remove_proc_entry(bond);
-}
 
-/* Unregister and free all bond devices.
- * Caller must hold rtnl_lock.
- */
-static void bond_free_all(void)
-{
-	struct bonding *bond, *nxt;
+	if (bond->wq)
+		destroy_workqueue(bond->wq);
 
-	list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
-		struct net_device *bond_dev = bond->dev;
-
-		bond_work_cancel_all(bond);
-		/* Release the bonded slaves */
-		bond_release_all(bond_dev);
-		unregister_netdevice(bond_dev);
-	}
-
-	bond_destroy_proc_dir();
+	netif_addr_lock_bh(bond_dev);
+	bond_mc_list_destroy(bond);
+	netif_addr_unlock_bh(bond_dev);
 }
 
 /*------------------------- Module initialization ---------------------------*/
@@ -4646,7 +4642,7 @@
 
 static int bond_check_params(struct bond_params *params)
 {
-	int arp_validate_value, fail_over_mac_value;
+	int arp_validate_value, fail_over_mac_value, primary_reselect_value;
 
 	/*
 	 * Convert string parameters.
@@ -4665,7 +4661,8 @@
 		if ((bond_mode != BOND_MODE_XOR) &&
 		    (bond_mode != BOND_MODE_8023AD)) {
 			pr_info(DRV_NAME
-			       ": xor_mode param is irrelevant in mode %s\n",
+				": xmit_hash_policy param is irrelevant in"
+				" mode %s\n",
 			       bond_mode_name(bond_mode));
 		} else {
 			xmit_hashtype = bond_parse_parm(xmit_hash_policy,
@@ -4945,6 +4942,20 @@
 		primary = NULL;
 	}
 
+	if (primary && primary_reselect) {
+		primary_reselect_value = bond_parse_parm(primary_reselect,
+							 pri_reselect_tbl);
+		if (primary_reselect_value == -1) {
+			pr_err(DRV_NAME
+			       ": Error: Invalid primary_reselect \"%s\"\n",
+			       primary_reselect ==
+					NULL ? "NULL" : primary_reselect);
+			return -EINVAL;
+		}
+	} else {
+		primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
+	}
+
 	if (fail_over_mac) {
 		fail_over_mac_value = bond_parse_parm(fail_over_mac,
 						      fail_over_mac_tbl);
@@ -4976,6 +4987,7 @@
 	params->use_carrier = use_carrier;
 	params->lacp_fast = lacp_fast;
 	params->primary[0] = 0;
+	params->primary_reselect = primary_reselect_value;
 	params->fail_over_mac = fail_over_mac_value;
 
 	if (primary) {
@@ -5012,6 +5024,7 @@
 static int bond_init(struct net_device *bond_dev)
 {
 	struct bonding *bond = netdev_priv(bond_dev);
+	struct bond_net *bn = net_generic(dev_net(bond_dev), bond_net_id);
 
 	pr_debug("Begin bond_init for %s\n", bond_dev->name);
 
@@ -5024,30 +5037,41 @@
 	netif_carrier_off(bond_dev);
 
 	bond_create_proc_entry(bond);
-	list_add_tail(&bond->bond_list, &bond_dev_list);
+	list_add_tail(&bond->bond_list, &bn->dev_list);
 
+	bond_prepare_sysfs_group(bond);
 	return 0;
 }
 
+static int bond_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+	if (tb[IFLA_ADDRESS]) {
+		if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+			return -EINVAL;
+		if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+			return -EADDRNOTAVAIL;
+	}
+	return 0;
+}
+
+static struct rtnl_link_ops bond_link_ops __read_mostly = {
+	.kind		= "bond",
+	.priv_size	= sizeof(struct bonding),
+	.setup		= bond_setup,
+	.validate	= bond_validate,
+};
+
 /* Create a new bond based on the specified name and bonding parameters.
  * If name is NULL, obtain a suitable "bond%d" name for us.
  * Caller must NOT hold rtnl_lock; we need to release it here before we
  * set up our sysfs entries.
  */
-int bond_create(const char *name)
+int bond_create(struct net *net, const char *name)
 {
 	struct net_device *bond_dev;
 	int res;
 
 	rtnl_lock();
-	/* Check to see if the bond already exists. */
-	/* FIXME: pass netns from caller */
-	if (name && __dev_get_by_name(&init_net, name)) {
-		pr_err(DRV_NAME ": cannot add bond %s; already exists\n",
-		       name);
-		res = -EEXIST;
-		goto out_rtnl;
-	}
 
 	bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
 				bond_setup);
@@ -5055,9 +5079,12 @@
 		pr_err(DRV_NAME ": %s: eek! can't alloc netdev!\n",
 		       name);
 		res = -ENOMEM;
-		goto out_rtnl;
+		goto out;
 	}
 
+	dev_net_set(bond_dev, net);
+	bond_dev->rtnl_link_ops = &bond_link_ops;
+
 	if (!name) {
 		res = dev_alloc_name(bond_dev, "bond%d");
 		if (res < 0)
@@ -5065,27 +5092,55 @@
 	}
 
 	res = register_netdevice(bond_dev);
-	if (res < 0)
-		goto out_bond;
 
-	res = bond_create_sysfs_entry(netdev_priv(bond_dev));
-	if (res < 0)
-		goto out_unreg;
-
-	rtnl_unlock();
-	return 0;
-
-out_unreg:
-	unregister_netdevice(bond_dev);
-out_bond:
-	bond_deinit(bond_dev);
-out_netdev:
-	free_netdev(bond_dev);
-out_rtnl:
+out:
 	rtnl_unlock();
 	return res;
+out_netdev:
+	free_netdev(bond_dev);
+	goto out;
 }
 
+static int bond_net_init(struct net *net)
+{
+	struct bond_net *bn;
+	int err;
+
+	err = -ENOMEM;
+	bn = kzalloc(sizeof(struct bond_net), GFP_KERNEL);
+	if (bn == NULL)
+		goto out;
+
+	bn->net = net;
+	INIT_LIST_HEAD(&bn->dev_list);
+
+	err = net_assign_generic(net, bond_net_id, bn);
+	if (err)
+		goto out_free;
+
+	bond_create_proc_dir(bn);
+out:
+	return err;
+out_free:
+	kfree(bn);
+	goto out;
+}
+
+static void bond_net_exit(struct net *net)
+{
+	struct bond_net *bn;
+
+	bn = net_generic(net, bond_net_id);
+
+	bond_destroy_proc_dir(bn);
+	kfree(bn);
+}
+
+static struct pernet_operations bond_net_ops = {
+	.init = bond_net_init,
+	.exit = bond_net_exit,
+};
+
 static int __init bonding_init(void)
 {
 	int i;
@@ -5097,10 +5152,16 @@
 	if (res)
 		goto out;
 
-	bond_create_proc_dir();
+	res = register_pernet_gen_subsys(&bond_net_id, &bond_net_ops);
+	if (res)
+		goto out;
+
+	res = rtnl_link_register(&bond_link_ops);
+	if (res)
+		goto err_link;
 
 	for (i = 0; i < max_bonds; i++) {
-		res = bond_create(NULL);
+		res = bond_create(&init_net, NULL);
 		if (res)
 			goto err;
 	}
@@ -5112,14 +5173,13 @@
 	register_netdevice_notifier(&bond_netdev_notifier);
 	register_inetaddr_notifier(&bond_inetaddr_notifier);
 	bond_register_ipv6_notifier();
-
-	goto out;
-err:
-	rtnl_lock();
-	bond_free_all();
-	rtnl_unlock();
 out:
 	return res;
+err:
+	rtnl_link_unregister(&bond_link_ops);
+err_link:
+	unregister_pernet_gen_subsys(bond_net_id, &bond_net_ops);
+	goto out;
 
 }
 
@@ -5131,9 +5191,8 @@
 
 	bond_destroy_sysfs();
 
-	rtnl_lock();
-	bond_free_all();
-	rtnl_unlock();
+	rtnl_link_unregister(&bond_link_ops);
+	unregister_pernet_gen_subsys(bond_net_id, &bond_net_ops);
 }
 
 module_init(bonding_init);
@@ -5142,3 +5201,4 @@
 MODULE_VERSION(DRV_VERSION);
 MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
 MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
+MODULE_ALIAS_RTNL_LINK("bond");
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index ff449de..a59094f 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -35,6 +35,8 @@
 #include <linux/rtnetlink.h>
 #include <linux/etherdevice.h>
 #include <net/net_namespace.h>
+#include <net/netns/generic.h>
+#include <linux/nsproxy.h>
 
 #include "bonding.h"
 
@@ -47,12 +49,14 @@
  */
 static ssize_t bonding_show_bonds(struct class *cls, char *buf)
 {
+	struct net *net = current->nsproxy->net_ns;
+	struct bond_net *bn = net_generic(net, bond_net_id);
 	int res = 0;
 	struct bonding *bond;
 
 	rtnl_lock();
 
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (res > (PAGE_SIZE - IFNAMSIZ)) {
 			/* not enough space for another interface name */
 			if ((PAGE_SIZE - res) > 10)
@@ -69,11 +73,12 @@
 	return res;
 }
 
-static struct net_device *bond_get_by_name(const char *ifname)
+static struct net_device *bond_get_by_name(struct net *net, const char *ifname)
 {
+	struct bond_net *bn = net_generic(net, bond_net_id);
 	struct bonding *bond;
 
-	list_for_each_entry(bond, &bond_dev_list, bond_list) {
+	list_for_each_entry(bond, &bn->dev_list, bond_list) {
 		if (strncmp(bond->dev->name, ifname, IFNAMSIZ) == 0)
 			return bond->dev;
 	}
@@ -91,6 +96,7 @@
 static ssize_t bonding_store_bonds(struct class *cls,
 				   const char *buffer, size_t count)
 {
+	struct net *net = current->nsproxy->net_ns;
 	char command[IFNAMSIZ + 1] = {0, };
 	char *ifname;
 	int rv, res = count;
@@ -104,7 +110,7 @@
 	if (command[0] == '+') {
 		pr_info(DRV_NAME
 			": %s is being created...\n", ifname);
-		rv = bond_create(ifname);
+		rv = bond_create(net, ifname);
 		if (rv) {
 			pr_info(DRV_NAME ": Bond creation failed.\n");
 			res = rv;
@@ -113,7 +119,7 @@
 		struct net_device *bond_dev;
 
 		rtnl_lock();
-		bond_dev = bond_get_by_name(ifname);
+		bond_dev = bond_get_by_name(net, ifname);
 		if (bond_dev) {
 			pr_info(DRV_NAME ": %s is being deleted...\n",
 				ifname);
@@ -238,8 +244,7 @@
 		/* Got a slave name in ifname.  Is it already in the list? */
 		found = 0;
 
-		/* FIXME: get netns from sysfs object */
-		dev = __dev_get_by_name(&init_net, ifname);
+		dev = __dev_get_by_name(dev_net(bond->dev), ifname);
 		if (!dev) {
 			pr_info(DRV_NAME
 			       ": %s: Interface %s does not exist!\n",
@@ -1213,6 +1218,58 @@
 		   bonding_show_primary, bonding_store_primary);
 
 /*
+ * Show and set the primary_reselect flag.
+ */
+static ssize_t bonding_show_primary_reselect(struct device *d,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct bonding *bond = to_bond(d);
+
+	return sprintf(buf, "%s %d\n",
+		       pri_reselect_tbl[bond->params.primary_reselect].modename,
+		       bond->params.primary_reselect);
+}
+
+static ssize_t bonding_store_primary_reselect(struct device *d,
+					      struct device_attribute *attr,
+					      const char *buf, size_t count)
+{
+	int new_value, ret = count;
+	struct bonding *bond = to_bond(d);
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	new_value = bond_parse_parm(buf, pri_reselect_tbl);
+	if (new_value < 0)  {
+		pr_err(DRV_NAME
+		       ": %s: Ignoring invalid primary_reselect value %.*s.\n",
+		       bond->dev->name,
+		       (int) strlen(buf) - 1, buf);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	bond->params.primary_reselect = new_value;
+	pr_info(DRV_NAME ": %s: setting primary_reselect to %s (%d).\n",
+		bond->dev->name, pri_reselect_tbl[new_value].modename,
+		new_value);
+
+	read_lock(&bond->lock);
+	write_lock_bh(&bond->curr_slave_lock);
+	bond_select_active_slave(bond);
+	write_unlock_bh(&bond->curr_slave_lock);
+	read_unlock(&bond->lock);
+out:
+	rtnl_unlock();
+	return ret;
+}
+static DEVICE_ATTR(primary_reselect, S_IRUGO | S_IWUSR,
+		   bonding_show_primary_reselect,
+		   bonding_store_primary_reselect);
+
+/*
  * Show and set the use_carrier flag.
  */
 static ssize_t bonding_show_carrier(struct device *d,
@@ -1501,6 +1558,7 @@
 	&dev_attr_num_unsol_na.attr,
 	&dev_attr_miimon.attr,
 	&dev_attr_primary.attr,
+	&dev_attr_primary_reselect.attr,
 	&dev_attr_use_carrier.attr,
 	&dev_attr_active_slave.attr,
 	&dev_attr_mii_status.attr,
@@ -1563,24 +1621,8 @@
  * Initialize sysfs for each bond.  This sets up and registers
  * the 'bondctl' directory for each individual bond under /sys/class/net.
  */
-int bond_create_sysfs_entry(struct bonding *bond)
+void bond_prepare_sysfs_group(struct bonding *bond)
 {
-	struct net_device *dev = bond->dev;
-	int err;
-
-	err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
-	if (err)
-		pr_emerg("eek! didn't create group!\n");
-
-	return err;
-}
-/*
- * Remove sysfs entries for each bond.
- */
-void bond_destroy_sysfs_entry(struct bonding *bond)
-{
-	struct net_device *dev = bond->dev;
-
-	sysfs_remove_group(&(dev->dev.kobj), &bonding_group);
+	bond->dev->sysfs_groups[0] = &bonding_group;
 }
 
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index 6824771..a51ae7d 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -23,15 +23,13 @@
 #include "bond_3ad.h"
 #include "bond_alb.h"
 
-#define DRV_VERSION	"3.5.0"
-#define DRV_RELDATE	"November 4, 2008"
+#define DRV_VERSION	"3.6.0"
+#define DRV_RELDATE	"September 26, 2009"
 #define DRV_NAME	"bonding"
 #define DRV_DESCRIPTION	"Ethernet Channel Bonding Driver"
 
 #define BOND_MAX_ARP_TARGETS	16
 
-extern struct list_head bond_dev_list;
-
 #define IS_UP(dev)					   \
 	      ((((dev)->flags & IFF_UP) == IFF_UP)	&& \
 	       netif_running(dev)			&& \
@@ -131,6 +129,7 @@
 	int lacp_fast;
 	int ad_select;
 	char primary[IFNAMSIZ];
+	int primary_reselect;
 	__be32 arp_targets[BOND_MAX_ARP_TARGETS];
 };
 
@@ -190,6 +189,7 @@
 	struct   slave *curr_active_slave;
 	struct   slave *current_arp_slave;
 	struct   slave *primary_slave;
+	bool     force_primary;
 	s32      slave_cnt; /* never change this value outside the attach/detach wrappers */
 	rwlock_t lock;
 	rwlock_t curr_slave_lock;
@@ -204,7 +204,7 @@
 #endif /* CONFIG_PROC_FS */
 	struct   list_head bond_list;
 	struct   dev_mc_list *mc_list;
-	int      (*xmit_hash_policy)(struct sk_buff *, struct net_device *, int);
+	int      (*xmit_hash_policy)(struct sk_buff *, int);
 	__be32   master_ip;
 	u16      flags;
 	u16      rr_tx_counter;
@@ -258,6 +258,10 @@
 		|| bond->params.mode == BOND_MODE_ALB;
 }
 
+#define BOND_PRI_RESELECT_ALWAYS	0
+#define BOND_PRI_RESELECT_BETTER	1
+#define BOND_PRI_RESELECT_FAILURE	2
+
 #define BOND_FOM_NONE			0
 #define BOND_FOM_ACTIVE			1
 #define BOND_FOM_FOLLOW			2
@@ -321,12 +325,11 @@
 
 struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
 int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
-int bond_create(const char *name);
+int bond_create(struct net *net, const char *name);
 int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev);
 int bond_create_sysfs(void);
 void bond_destroy_sysfs(void);
-void bond_destroy_sysfs_entry(struct bonding *bond);
-int bond_create_sysfs_entry(struct bonding *bond);
+void bond_prepare_sysfs_group(struct bonding *bond);
 int bond_create_slave_symlinks(struct net_device *master, struct net_device *slave);
 void bond_destroy_slave_symlinks(struct net_device *master, struct net_device *slave);
 int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev);
@@ -341,13 +344,22 @@
 void bond_register_arp(struct bonding *);
 void bond_unregister_arp(struct bonding *);
 
+struct bond_net {
+	struct net *		net;	/* Associated network namespace */
+	struct list_head	dev_list;
+#ifdef CONFIG_PROC_FS
+	struct proc_dir_entry *	proc_dir;
+#endif
+};
+
 /* exported from bond_main.c */
-extern struct list_head bond_dev_list;
+extern int bond_net_id;
 extern const struct bond_parm_tbl bond_lacp_tbl[];
 extern const struct bond_parm_tbl bond_mode_tbl[];
 extern const struct bond_parm_tbl xmit_hashtype_tbl[];
 extern const struct bond_parm_tbl arp_validate_tbl[];
 extern const struct bond_parm_tbl fail_over_mac_tbl[];
+extern const struct bond_parm_tbl pri_reselect_tbl[];
 extern struct bond_parm_tbl ad_select_tbl[];
 
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
@@ -370,4 +382,3 @@
 #endif
 
 #endif /* _LINUX_BONDING_H */
-
diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig
index df32c10..26d77cc 100644
--- a/drivers/net/can/Kconfig
+++ b/drivers/net/can/Kconfig
@@ -95,6 +95,13 @@
 	---help---
 	  This is a driver for the SoC CAN controller in Atmel's AT91SAM9263.
 
+config CAN_TI_HECC
+	depends on CAN_DEV && ARCH_OMAP3
+	tristate "TI High End CAN Controller"
+	---help---
+	  Driver for TI HECC (High End CAN Controller) module found on many
+	  TI devices. The device specifications are available from www.ti.com
+
 config CAN_DEBUG_DEVICES
 	bool "CAN devices debugging messages"
 	depends on CAN
diff --git a/drivers/net/can/Makefile b/drivers/net/can/Makefile
index 0dea627..31f4ab5 100644
--- a/drivers/net/can/Makefile
+++ b/drivers/net/can/Makefile
@@ -11,5 +11,6 @@
 
 obj-$(CONFIG_CAN_SJA1000)	+= sja1000/
 obj-$(CONFIG_CAN_AT91)		+= at91_can.o
+obj-$(CONFIG_CAN_TI_HECC)	+= ti_hecc.o
 
 ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/at91_can.c b/drivers/net/can/at91_can.c
index f67ae28..cbe3fce 100644
--- a/drivers/net/can/at91_can.c
+++ b/drivers/net/can/at91_can.c
@@ -221,38 +221,6 @@
 	set_mb_mode_prio(priv, mb, mode, 0);
 }
 
-static struct sk_buff *alloc_can_skb(struct net_device *dev,
-		struct can_frame **cf)
-{
-	struct sk_buff *skb;
-
-	skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
-	if (unlikely(!skb))
-		return NULL;
-
-	skb->protocol = htons(ETH_P_CAN);
-	skb->ip_summed = CHECKSUM_UNNECESSARY;
-	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
-	return skb;
-}
-
-static struct sk_buff *alloc_can_err_skb(struct net_device *dev,
-		struct can_frame **cf)
-{
-	struct sk_buff *skb;
-
-	skb = alloc_can_skb(dev, cf);
-	if (unlikely(!skb))
-		return NULL;
-
-	memset(*cf, 0, sizeof(struct can_frame));
-	(*cf)->can_id = CAN_ERR_FLAG;
-	(*cf)->can_dlc = CAN_ERR_DLC;
-
-	return skb;
-}
-
 /*
  * Swtich transceiver on or off
  */
@@ -1087,7 +1055,7 @@
 		goto exit_release;
 	}
 
-	dev = alloc_candev(sizeof(struct at91_priv));
+	dev = alloc_candev(sizeof(struct at91_priv), AT91_MB_TX_NUM);
 	if (!dev) {
 		err = -ENOMEM;
 		goto exit_iounmap;
diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c
index f0b9a1e..c3db111 100644
--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -245,7 +245,7 @@
 	struct net_device_stats *stats = &dev->stats;
 	int i;
 
-	for (i = 0; i < CAN_ECHO_SKB_MAX; i++) {
+	for (i = 0; i < priv->echo_skb_max; i++) {
 		if (priv->echo_skb[i]) {
 			kfree_skb(priv->echo_skb[i]);
 			priv->echo_skb[i] = NULL;
@@ -262,10 +262,13 @@
  * of the device driver. The driver must protect access to
  * priv->echo_skb, if necessary.
  */
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx)
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		      unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	/* check flag whether this packet has to be looped back */
 	if (!(dev->flags & IFF_ECHO) || skb->pkt_type != PACKET_LOOPBACK) {
 		kfree_skb(skb);
@@ -311,10 +314,12 @@
  * is handled in the device driver. The driver must protect
  * access to priv->echo_skb, if necessary.
  */
-void can_get_echo_skb(struct net_device *dev, int idx)
+void can_get_echo_skb(struct net_device *dev, unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	if (priv->echo_skb[idx]) {
 		netif_rx(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
@@ -327,10 +332,12 @@
   *
   * The function is typically called when TX failed.
   */
-void can_free_echo_skb(struct net_device *dev, int idx)
+void can_free_echo_skb(struct net_device *dev, unsigned int idx)
 {
 	struct can_priv *priv = netdev_priv(dev);
 
+	BUG_ON(idx >= priv->echo_skb_max);
+
 	if (priv->echo_skb[idx]) {
 		kfree_skb(priv->echo_skb[idx]);
 		priv->echo_skb[idx] = NULL;
@@ -359,17 +366,12 @@
 	can_flush_echo_skb(dev);
 
 	/* send restart message upstream */
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev, &cf);
 	if (skb == NULL) {
 		err = -ENOMEM;
 		goto restart;
 	}
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-	cf->can_id = CAN_ERR_FLAG | CAN_ERR_RESTARTED;
-	cf->can_dlc = CAN_ERR_DLC;
+	cf->can_id |= CAN_ERR_RESTARTED;
 
 	netif_rx(skb);
 
@@ -442,20 +444,66 @@
 	dev->features = NETIF_F_NO_CSUM;
 }
 
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf)
+{
+	struct sk_buff *skb;
+
+	skb = netdev_alloc_skb(dev, sizeof(struct can_frame));
+	if (unlikely(!skb))
+		return NULL;
+
+	skb->protocol = htons(ETH_P_CAN);
+	skb->pkt_type = PACKET_BROADCAST;
+	skb->ip_summed = CHECKSUM_UNNECESSARY;
+	*cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
+	memset(*cf, 0, sizeof(struct can_frame));
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_skb);
+
+struct sk_buff *alloc_can_err_skb(struct net_device *dev, struct can_frame **cf)
+{
+	struct sk_buff *skb;
+
+	skb = alloc_can_skb(dev, cf);
+	if (unlikely(!skb))
+		return NULL;
+
+	(*cf)->can_id = CAN_ERR_FLAG;
+	(*cf)->can_dlc = CAN_ERR_DLC;
+
+	return skb;
+}
+EXPORT_SYMBOL_GPL(alloc_can_err_skb);
+
 /*
  * Allocate and setup space for the CAN network device
  */
-struct net_device *alloc_candev(int sizeof_priv)
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max)
 {
 	struct net_device *dev;
 	struct can_priv *priv;
+	int size;
 
-	dev = alloc_netdev(sizeof_priv, "can%d", can_setup);
+	if (echo_skb_max)
+		size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) +
+			echo_skb_max * sizeof(struct sk_buff *);
+	else
+		size = sizeof_priv;
+
+	dev = alloc_netdev(size, "can%d", can_setup);
 	if (!dev)
 		return NULL;
 
 	priv = netdev_priv(dev);
 
+	if (echo_skb_max) {
+		priv->echo_skb_max = echo_skb_max;
+		priv->echo_skb = (void *)priv +
+			ALIGN(sizeof_priv, sizeof(struct sk_buff *));
+	}
+
 	priv->state = CAN_STATE_STOPPED;
 
 	init_timer(&priv->restart_timer);
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index 16d2ecd..782a47f 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -296,11 +296,9 @@
 	uint8_t dlc;
 	int i;
 
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_skb(dev, &cf);
 	if (skb == NULL)
 		return;
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
 
 	fi = priv->read_reg(priv, REG_FI);
 	dlc = fi & 0x0F;
@@ -323,8 +321,6 @@
 	if (fi & FI_RTR)
 		id |= CAN_RTR_FLAG;
 
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
 	cf->can_id = id;
 	cf->can_dlc = dlc;
 	for (i = 0; i < dlc; i++)
@@ -351,15 +347,9 @@
 	enum can_state state = priv->can.state;
 	uint8_t ecc, alc;
 
-	skb = dev_alloc_skb(sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev, &cf);
 	if (skb == NULL)
 		return -ENOMEM;
-	skb->dev = dev;
-	skb->protocol = htons(ETH_P_CAN);
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-	cf->can_id = CAN_ERR_FLAG;
-	cf->can_dlc = CAN_ERR_DLC;
 
 	if (isrc & IRQ_DOI) {
 		/* data overrun interrupt */
@@ -565,7 +555,8 @@
 	struct net_device *dev;
 	struct sja1000_priv *priv;
 
-	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv);
+	dev = alloc_candev(sizeof(struct sja1000_priv) + sizeof_priv,
+		SJA1000_ECHO_SKB_MAX);
 	if (!dev)
 		return NULL;
 
diff --git a/drivers/net/can/sja1000/sja1000.h b/drivers/net/can/sja1000/sja1000.h
index 302d2c7..97a622b 100644
--- a/drivers/net/can/sja1000/sja1000.h
+++ b/drivers/net/can/sja1000/sja1000.h
@@ -50,6 +50,8 @@
 #include <linux/can/dev.h>
 #include <linux/can/platform/sja1000.h>
 
+#define SJA1000_ECHO_SKB_MAX	1 /* the SJA1000 has one TX buffer object */
+
 #define SJA1000_MAX_IRQ 20	/* max. number of interrupts handled in ISR */
 
 /* SJA1000 registers - manual section 6.4 (Pelican Mode) */
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
new file mode 100644
index 0000000..07e8016
--- /dev/null
+++ b/drivers/net/can/ti_hecc.c
@@ -0,0 +1,993 @@
+/*
+ * TI HECC (CAN) device driver
+ *
+ * This driver supports TI's HECC (High End CAN Controller module) and the
+ * specs for the same is available at <http://www.ti.com>
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/*
+ * Your platform definitions should specify module ram offsets and interrupt
+ * number to use as follows:
+ *
+ * static struct ti_hecc_platform_data am3517_evm_hecc_pdata = {
+ *         .scc_hecc_offset        = 0,
+ *         .scc_ram_offset         = 0x3000,
+ *         .hecc_ram_offset        = 0x3000,
+ *         .mbx_offset             = 0x2000,
+ *         .int_line               = 0,
+ *         .revision               = 1,
+ * };
+ *
+ * Please see include/can/platform/ti_hecc.h for description of above fields
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/skbuff.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/can/platform/ti_hecc.h>
+
+#define DRV_NAME "ti_hecc"
+#define HECC_MODULE_VERSION     "0.7"
+MODULE_VERSION(HECC_MODULE_VERSION);
+#define DRV_DESC "TI High End CAN Controller Driver " HECC_MODULE_VERSION
+
+/* TX / RX Mailbox Configuration */
+#define HECC_MAX_MAILBOXES	32	/* hardware mailboxes - do not change */
+#define MAX_TX_PRIO		0x3F	/* hardware value - do not change */
+
+/*
+ * Important Note: TX mailbox configuration
+ * TX mailboxes should be restricted to the number of SKB buffers to avoid
+ * maintaining SKB buffers separately. TX mailboxes should be a power of 2
+ * for the mailbox logic to work.  Top mailbox numbers are reserved for RX
+ * and lower mailboxes for TX.
+ *
+ * HECC_MAX_TX_MBOX	HECC_MB_TX_SHIFT
+ * 4 (default)		2
+ * 8			3
+ * 16			4
+ */
+#define HECC_MB_TX_SHIFT	2 /* as per table above */
+#define HECC_MAX_TX_MBOX	BIT(HECC_MB_TX_SHIFT)
+
+#define HECC_TX_PRIO_SHIFT	(HECC_MB_TX_SHIFT)
+#define HECC_TX_PRIO_MASK	(MAX_TX_PRIO << HECC_MB_TX_SHIFT)
+#define HECC_TX_MB_MASK		(HECC_MAX_TX_MBOX - 1)
+#define HECC_TX_MASK		((HECC_MAX_TX_MBOX - 1) | HECC_TX_PRIO_MASK)
+#define HECC_TX_MBOX_MASK	(~(BIT(HECC_MAX_TX_MBOX) - 1))
+#define HECC_DEF_NAPI_WEIGHT	HECC_MAX_RX_MBOX
+
+/*
+ * Important Note: RX mailbox configuration
+ * RX mailboxes are further logically split into two - main and buffer
+ * mailboxes. The goal is to get all packets into main mailboxes as
+ * driven by mailbox number and receive priority (higher to lower) and
+ * buffer mailboxes are used to receive pkts while main mailboxes are being
+ * processed. This ensures in-order packet reception.
+ *
+ * Here are the recommended values for buffer mailbox. Note that RX mailboxes
+ * start after TX mailboxes:
+ *
+ * HECC_MAX_RX_MBOX		HECC_RX_BUFFER_MBOX	No of buffer mailboxes
+ * 28				12			8
+ * 16				20			4
+ */
+
+#define HECC_MAX_RX_MBOX	(HECC_MAX_MAILBOXES - HECC_MAX_TX_MBOX)
+#define HECC_RX_BUFFER_MBOX	12 /* as per table above */
+#define HECC_RX_FIRST_MBOX	(HECC_MAX_MAILBOXES - 1)
+#define HECC_RX_HIGH_MBOX_MASK	(~(BIT(HECC_RX_BUFFER_MBOX) - 1))
+
+/* TI HECC module registers */
+#define HECC_CANME		0x0	/* Mailbox enable */
+#define HECC_CANMD		0x4	/* Mailbox direction */
+#define HECC_CANTRS		0x8	/* Transmit request set */
+#define HECC_CANTRR		0xC	/* Transmit request */
+#define HECC_CANTA		0x10	/* Transmission acknowledge */
+#define HECC_CANAA		0x14	/* Abort acknowledge */
+#define HECC_CANRMP		0x18	/* Receive message pending */
+#define HECC_CANRML		0x1C	/* Remote message lost */
+#define HECC_CANRFP		0x20	/* Remote frame pending */
+#define HECC_CANGAM		0x24	/* SECC only:Global acceptance mask */
+#define HECC_CANMC		0x28	/* Master control */
+#define HECC_CANBTC		0x2C	/* Bit timing configuration */
+#define HECC_CANES		0x30	/* Error and status */
+#define HECC_CANTEC		0x34	/* Transmit error counter */
+#define HECC_CANREC		0x38	/* Receive error counter */
+#define HECC_CANGIF0		0x3C	/* Global interrupt flag 0 */
+#define HECC_CANGIM		0x40	/* Global interrupt mask */
+#define HECC_CANGIF1		0x44	/* Global interrupt flag 1 */
+#define HECC_CANMIM		0x48	/* Mailbox interrupt mask */
+#define HECC_CANMIL		0x4C	/* Mailbox interrupt level */
+#define HECC_CANOPC		0x50	/* Overwrite protection control */
+#define HECC_CANTIOC		0x54	/* Transmit I/O control */
+#define HECC_CANRIOC		0x58	/* Receive I/O control */
+#define HECC_CANLNT		0x5C	/* HECC only: Local network time */
+#define HECC_CANTOC		0x60	/* HECC only: Time-out control */
+#define HECC_CANTOS		0x64	/* HECC only: Time-out status */
+#define HECC_CANTIOCE		0x68	/* SCC only:Enhanced TX I/O control */
+#define HECC_CANRIOCE		0x6C	/* SCC only:Enhanced RX I/O control */
+
+/* Mailbox registers */
+#define HECC_CANMID		0x0
+#define HECC_CANMCF		0x4
+#define HECC_CANMDL		0x8
+#define HECC_CANMDH		0xC
+
+#define HECC_SET_REG		0xFFFFFFFF
+#define HECC_CANID_MASK		0x3FF	/* 18 bits mask for extended id's */
+#define HECC_CCE_WAIT_COUNT     100	/* Wait for ~1 sec for CCE bit */
+
+#define HECC_CANMC_SCM		BIT(13)	/* SCC compat mode */
+#define HECC_CANMC_CCR		BIT(12)	/* Change config request */
+#define HECC_CANMC_PDR		BIT(11)	/* Local Power down - for sleep mode */
+#define HECC_CANMC_ABO		BIT(7)	/* Auto Bus On */
+#define HECC_CANMC_STM		BIT(6)	/* Self test mode - loopback */
+#define HECC_CANMC_SRES		BIT(5)	/* Software reset */
+
+#define HECC_CANTIOC_EN		BIT(3)	/* Enable CAN TX I/O pin */
+#define HECC_CANRIOC_EN		BIT(3)	/* Enable CAN RX I/O pin */
+
+#define HECC_CANMID_IDE		BIT(31)	/* Extended frame format */
+#define HECC_CANMID_AME		BIT(30)	/* Acceptance mask enable */
+#define HECC_CANMID_AAM		BIT(29)	/* Auto answer mode */
+
+#define HECC_CANES_FE		BIT(24)	/* form error */
+#define HECC_CANES_BE		BIT(23)	/* bit error */
+#define HECC_CANES_SA1		BIT(22)	/* stuck at dominant error */
+#define HECC_CANES_CRCE		BIT(21)	/* CRC error */
+#define HECC_CANES_SE		BIT(20)	/* stuff bit error */
+#define HECC_CANES_ACKE		BIT(19)	/* ack error */
+#define HECC_CANES_BO		BIT(18)	/* Bus off status */
+#define HECC_CANES_EP		BIT(17)	/* Error passive status */
+#define HECC_CANES_EW		BIT(16)	/* Error warning status */
+#define HECC_CANES_SMA		BIT(5)	/* suspend mode ack */
+#define HECC_CANES_CCE		BIT(4)	/* Change config enabled */
+#define HECC_CANES_PDA		BIT(3)	/* Power down mode ack */
+
+#define HECC_CANBTC_SAM		BIT(7)	/* sample points */
+
+#define HECC_BUS_ERROR		(HECC_CANES_FE | HECC_CANES_BE |\
+				HECC_CANES_CRCE | HECC_CANES_SE |\
+				HECC_CANES_ACKE)
+
+#define HECC_CANMCF_RTR		BIT(4)	/* Remote transmit request */
+
+#define HECC_CANGIF_MAIF	BIT(17)	/* Message alarm interrupt */
+#define HECC_CANGIF_TCOIF	BIT(16) /* Timer counter overflow int */
+#define HECC_CANGIF_GMIF	BIT(15)	/* Global mailbox interrupt */
+#define HECC_CANGIF_AAIF	BIT(14)	/* Abort ack interrupt */
+#define HECC_CANGIF_WDIF	BIT(13)	/* Write denied interrupt */
+#define HECC_CANGIF_WUIF	BIT(12)	/* Wake up interrupt */
+#define HECC_CANGIF_RMLIF	BIT(11)	/* Receive message lost interrupt */
+#define HECC_CANGIF_BOIF	BIT(10)	/* Bus off interrupt */
+#define HECC_CANGIF_EPIF	BIT(9)	/* Error passive interrupt */
+#define HECC_CANGIF_WLIF	BIT(8)	/* Warning level interrupt */
+#define HECC_CANGIF_MBOX_MASK	0x1F	/* Mailbox number mask */
+#define HECC_CANGIM_I1EN	BIT(1)	/* Int line 1 enable */
+#define HECC_CANGIM_I0EN	BIT(0)	/* Int line 0 enable */
+#define HECC_CANGIM_DEF_MASK	0x700	/* only busoff/warning/passive */
+#define HECC_CANGIM_SIL		BIT(2)	/* system interrupts to int line 1 */
+
+/* CAN Bittiming constants as per HECC specs */
+static struct can_bittiming_const ti_hecc_bittiming_const = {
+	.name = DRV_NAME,
+	.tseg1_min = 1,
+	.tseg1_max = 16,
+	.tseg2_min = 1,
+	.tseg2_max = 8,
+	.sjw_max = 4,
+	.brp_min = 1,
+	.brp_max = 256,
+	.brp_inc = 1,
+};
+
+struct ti_hecc_priv {
+	struct can_priv can;	/* MUST be first member/field */
+	struct napi_struct napi;
+	struct net_device *ndev;
+	struct clk *clk;
+	void __iomem *base;
+	u32 scc_ram_offset;
+	u32 hecc_ram_offset;
+	u32 mbx_offset;
+	u32 int_line;
+	spinlock_t mbx_lock; /* CANME register needs protection */
+	u32 tx_head;
+	u32 tx_tail;
+	u32 rx_next;
+};
+
+static inline int get_tx_head_mb(struct ti_hecc_priv *priv)
+{
+	return priv->tx_head & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_tail_mb(struct ti_hecc_priv *priv)
+{
+	return priv->tx_tail & HECC_TX_MB_MASK;
+}
+
+static inline int get_tx_head_prio(struct ti_hecc_priv *priv)
+{
+	return (priv->tx_head >> HECC_TX_PRIO_SHIFT) & MAX_TX_PRIO;
+}
+
+static inline void hecc_write_lam(struct ti_hecc_priv *priv, u32 mbxno, u32 val)
+{
+	__raw_writel(val, priv->base + priv->hecc_ram_offset + mbxno * 4);
+}
+
+static inline void hecc_write_mbx(struct ti_hecc_priv *priv, u32 mbxno,
+	u32 reg, u32 val)
+{
+	__raw_writel(val, priv->base + priv->mbx_offset + mbxno * 0x10 +
+			reg);
+}
+
+static inline u32 hecc_read_mbx(struct ti_hecc_priv *priv, u32 mbxno, u32 reg)
+{
+	return __raw_readl(priv->base + priv->mbx_offset + mbxno * 0x10 +
+			reg);
+}
+
+static inline void hecc_write(struct ti_hecc_priv *priv, u32 reg, u32 val)
+{
+	__raw_writel(val, priv->base + reg);
+}
+
+static inline u32 hecc_read(struct ti_hecc_priv *priv, int reg)
+{
+	return __raw_readl(priv->base + reg);
+}
+
+static inline void hecc_set_bit(struct ti_hecc_priv *priv, int reg,
+	u32 bit_mask)
+{
+	hecc_write(priv, reg, hecc_read(priv, reg) | bit_mask);
+}
+
+static inline void hecc_clear_bit(struct ti_hecc_priv *priv, int reg,
+	u32 bit_mask)
+{
+	hecc_write(priv, reg, hecc_read(priv, reg) & ~bit_mask);
+}
+
+static inline u32 hecc_get_bit(struct ti_hecc_priv *priv, int reg, u32 bit_mask)
+{
+	return (hecc_read(priv, reg) & bit_mask) ? 1 : 0;
+}
+
+static int ti_hecc_get_state(const struct net_device *ndev,
+	enum can_state *state)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	*state = priv->can.state;
+	return 0;
+}
+
+static int ti_hecc_set_btc(struct ti_hecc_priv *priv)
+{
+	struct can_bittiming *bit_timing = &priv->can.bittiming;
+	u32 can_btc;
+
+	can_btc = (bit_timing->phase_seg2 - 1) & 0x7;
+	can_btc |= ((bit_timing->phase_seg1 + bit_timing->prop_seg - 1)
+			& 0xF) << 3;
+	if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) {
+		if (bit_timing->brp > 4)
+			can_btc |= HECC_CANBTC_SAM;
+		else
+			dev_warn(priv->ndev->dev.parent, "WARN: Triple" \
+				"sampling not set due to h/w limitations");
+	}
+	can_btc |= ((bit_timing->sjw - 1) & 0x3) << 8;
+	can_btc |= ((bit_timing->brp - 1) & 0xFF) << 16;
+
+	/* ERM being set to 0 by default meaning resync at falling edge */
+
+	hecc_write(priv, HECC_CANBTC, can_btc);
+	dev_info(priv->ndev->dev.parent, "setting CANBTC=%#x\n", can_btc);
+
+	return 0;
+}
+
+static void ti_hecc_reset(struct net_device *ndev)
+{
+	u32 cnt;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	dev_dbg(ndev->dev.parent, "resetting hecc ...\n");
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SRES);
+
+	/* Set change control request and wait till enabled */
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+
+	/*
+	 * INFO: It has been observed that at times CCE bit may not be
+	 * set and hw seems to be ok even if this bit is not set so
+	 * timing out with a timing of 1ms to respect the specs
+	 */
+	cnt = HECC_CCE_WAIT_COUNT;
+	while (!hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+		--cnt;
+		udelay(10);
+	}
+
+	/*
+	 * Note: On HECC, BTC can be programmed only in initialization mode, so
+	 * it is expected that the can bittiming parameters are set via ip
+	 * utility before the device is opened
+	 */
+	ti_hecc_set_btc(priv);
+
+	/* Clear CCR (and CANMC register) and wait for CCE = 0 enable */
+	hecc_write(priv, HECC_CANMC, 0);
+
+	/*
+	 * INFO: CAN net stack handles bus off and hence disabling auto-bus-on
+	 * hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_ABO);
+	 */
+
+	/*
+	 * INFO: It has been observed that at times CCE bit may not be
+	 * set and hw seems to be ok even if this bit is not set so
+	 */
+	cnt = HECC_CCE_WAIT_COUNT;
+	while (hecc_get_bit(priv, HECC_CANES, HECC_CANES_CCE) && cnt != 0) {
+		--cnt;
+		udelay(10);
+	}
+
+	/* Enable TX and RX I/O Control pins */
+	hecc_write(priv, HECC_CANTIOC, HECC_CANTIOC_EN);
+	hecc_write(priv, HECC_CANRIOC, HECC_CANRIOC_EN);
+
+	/* Clear registers for clean operation */
+	hecc_write(priv, HECC_CANTA, HECC_SET_REG);
+	hecc_write(priv, HECC_CANRMP, HECC_SET_REG);
+	hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+	hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+	hecc_write(priv, HECC_CANME, 0);
+	hecc_write(priv, HECC_CANMD, 0);
+
+	/* SCC compat mode NOT supported (and not needed too) */
+	hecc_set_bit(priv, HECC_CANMC, HECC_CANMC_SCM);
+}
+
+static void ti_hecc_start(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	u32 cnt, mbxno, mbx_mask;
+
+	/* put HECC in initialization mode and set btc */
+	ti_hecc_reset(ndev);
+
+	priv->tx_head = priv->tx_tail = HECC_TX_MASK;
+	priv->rx_next = HECC_RX_FIRST_MBOX;
+
+	/* Enable local and global acceptance mask registers */
+	hecc_write(priv, HECC_CANGAM, HECC_SET_REG);
+
+	/* Prepare configured mailboxes to receive messages */
+	for (cnt = 0; cnt < HECC_MAX_RX_MBOX; cnt++) {
+		mbxno = HECC_MAX_MAILBOXES - 1 - cnt;
+		mbx_mask = BIT(mbxno);
+		hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+		hecc_write_mbx(priv, mbxno, HECC_CANMID, HECC_CANMID_AME);
+		hecc_write_lam(priv, mbxno, HECC_SET_REG);
+		hecc_set_bit(priv, HECC_CANMD, mbx_mask);
+		hecc_set_bit(priv, HECC_CANME, mbx_mask);
+		hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+	}
+
+	/* Prevent message over-write & Enable interrupts */
+	hecc_write(priv, HECC_CANOPC, HECC_SET_REG);
+	if (priv->int_line) {
+		hecc_write(priv, HECC_CANMIL, HECC_SET_REG);
+		hecc_write(priv, HECC_CANGIM, HECC_CANGIM_DEF_MASK |
+			HECC_CANGIM_I1EN | HECC_CANGIM_SIL);
+	} else {
+		hecc_write(priv, HECC_CANMIL, 0);
+		hecc_write(priv, HECC_CANGIM,
+			HECC_CANGIM_DEF_MASK | HECC_CANGIM_I0EN);
+	}
+	priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+static void ti_hecc_stop(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	/* Disable interrupts and disable mailboxes */
+	hecc_write(priv, HECC_CANGIM, 0);
+	hecc_write(priv, HECC_CANMIM, 0);
+	hecc_write(priv, HECC_CANME, 0);
+	priv->can.state = CAN_STATE_STOPPED;
+}
+
+static int ti_hecc_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+	int ret = 0;
+
+	switch (mode) {
+	case CAN_MODE_START:
+		ti_hecc_start(ndev);
+		netif_wake_queue(ndev);
+		break;
+	default:
+		ret = -EOPNOTSUPP;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * ti_hecc_xmit: HECC Transmit
+ *
+ * The transmit mailboxes start from 0 to HECC_MAX_TX_MBOX. In HECC the
+ * priority of the mailbox for tranmission is dependent upon priority setting
+ * field in mailbox registers. The mailbox with highest value in priority field
+ * is transmitted first. Only when two mailboxes have the same value in
+ * priority field the highest numbered mailbox is transmitted first.
+ *
+ * To utilize the HECC priority feature as described above we start with the
+ * highest numbered mailbox with highest priority level and move on to the next
+ * mailbox with the same priority level and so on. Once we loop through all the
+ * transmit mailboxes we choose the next priority level (lower) and so on
+ * until we reach the lowest priority level on the lowest numbered mailbox
+ * when we stop transmission until all mailboxes are transmitted and then
+ * restart at highest numbered mailbox with highest priority.
+ *
+ * Two counters (head and tail) are used to track the next mailbox to transmit
+ * and to track the echo buffer for already transmitted mailbox. The queue
+ * is stopped when all the mailboxes are busy or when there is a priority
+ * value roll-over happens.
+ */
+static netdev_tx_t ti_hecc_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct can_frame *cf = (struct can_frame *)skb->data;
+	u32 mbxno, mbx_mask, data;
+	unsigned long flags;
+
+	mbxno = get_tx_head_mb(priv);
+	mbx_mask = BIT(mbxno);
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	if (unlikely(hecc_read(priv, HECC_CANME) & mbx_mask)) {
+		spin_unlock_irqrestore(&priv->mbx_lock, flags);
+		netif_stop_queue(ndev);
+		dev_err(priv->ndev->dev.parent,
+			"BUG: TX mbx not ready tx_head=%08X, tx_tail=%08X\n",
+			priv->tx_head, priv->tx_tail);
+		return NETDEV_TX_BUSY;
+	}
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	/* Prepare mailbox for transmission */
+	data = min_t(u8, cf->can_dlc, 8);
+	if (cf->can_id & CAN_RTR_FLAG) /* Remote transmission request */
+		data |= HECC_CANMCF_RTR;
+	data |= get_tx_head_prio(priv) << 8;
+	hecc_write_mbx(priv, mbxno, HECC_CANMCF, data);
+
+	if (cf->can_id & CAN_EFF_FLAG) /* Extended frame format */
+		data = (cf->can_id & CAN_EFF_MASK) | HECC_CANMID_IDE;
+	else /* Standard frame format */
+		data = (cf->can_id & CAN_SFF_MASK) << 18;
+	hecc_write_mbx(priv, mbxno, HECC_CANMID, data);
+	hecc_write_mbx(priv, mbxno, HECC_CANMDL,
+		be32_to_cpu(*(u32 *)(cf->data)));
+	if (cf->can_dlc > 4)
+		hecc_write_mbx(priv, mbxno, HECC_CANMDH,
+			be32_to_cpu(*(u32 *)(cf->data + 4)));
+	else
+		*(u32 *)(cf->data + 4) = 0;
+	can_put_echo_skb(skb, ndev, mbxno);
+
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	--priv->tx_head;
+	if ((hecc_read(priv, HECC_CANME) & BIT(get_tx_head_mb(priv))) ||
+		(priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK) {
+		netif_stop_queue(ndev);
+	}
+	hecc_set_bit(priv, HECC_CANME, mbx_mask);
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	hecc_clear_bit(priv, HECC_CANMD, mbx_mask);
+	hecc_set_bit(priv, HECC_CANMIM, mbx_mask);
+	hecc_write(priv, HECC_CANTRS, mbx_mask);
+
+	return NETDEV_TX_OK;
+}
+
+static int ti_hecc_rx_pkt(struct ti_hecc_priv *priv, int mbxno)
+{
+	struct net_device_stats *stats = &priv->ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+	u32 data, mbx_mask;
+	unsigned long flags;
+
+	skb = alloc_can_skb(priv->ndev, &cf);
+	if (!skb) {
+		if (printk_ratelimit())
+			dev_err(priv->ndev->dev.parent,
+				"ti_hecc_rx_pkt: alloc_can_skb() failed\n");
+		return -ENOMEM;
+	}
+
+	mbx_mask = BIT(mbxno);
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMID);
+	if (data & HECC_CANMID_IDE)
+		cf->can_id = (data & CAN_EFF_MASK) | CAN_EFF_FLAG;
+	else
+		cf->can_id = (data >> 18) & CAN_SFF_MASK;
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMCF);
+	if (data & HECC_CANMCF_RTR)
+		cf->can_id |= CAN_RTR_FLAG;
+	cf->can_dlc = data & 0xF;
+	data = hecc_read_mbx(priv, mbxno, HECC_CANMDL);
+	*(u32 *)(cf->data) = cpu_to_be32(data);
+	if (cf->can_dlc > 4) {
+		data = hecc_read_mbx(priv, mbxno, HECC_CANMDH);
+		*(u32 *)(cf->data + 4) = cpu_to_be32(data);
+	} else {
+		*(u32 *)(cf->data + 4) = 0;
+	}
+	spin_lock_irqsave(&priv->mbx_lock, flags);
+	hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+	hecc_write(priv, HECC_CANRMP, mbx_mask);
+	/* enable mailbox only if it is part of rx buffer mailboxes */
+	if (priv->rx_next < HECC_RX_BUFFER_MBOX)
+		hecc_set_bit(priv, HECC_CANME, mbx_mask);
+	spin_unlock_irqrestore(&priv->mbx_lock, flags);
+
+	stats->rx_bytes += cf->can_dlc;
+	netif_receive_skb(skb);
+	stats->rx_packets++;
+
+	return 0;
+}
+
+/*
+ * ti_hecc_rx_poll - HECC receive pkts
+ *
+ * The receive mailboxes start from highest numbered mailbox till last xmit
+ * mailbox. On CAN frame reception the hardware places the data into highest
+ * numbered mailbox that matches the CAN ID filter. Since all receive mailboxes
+ * have same filtering (ALL CAN frames) packets will arrive in the highest
+ * available RX mailbox and we need to ensure in-order packet reception.
+ *
+ * To ensure the packets are received in the right order we logically divide
+ * the RX mailboxes into main and buffer mailboxes. Packets are received as per
+ * mailbox priotity (higher to lower) in the main bank and once it is full we
+ * disable further reception into main mailboxes. While the main mailboxes are
+ * processed in NAPI, further packets are received in buffer mailboxes.
+ *
+ * We maintain a RX next mailbox counter to process packets and once all main
+ * mailboxe packets are passed to the upper stack we enable all of them but
+ * continue to process packets received in buffer mailboxes. With each packet
+ * received from buffer mailbox we enable it immediately so as to handle the
+ * overflow from higher mailboxes.
+ */
+static int ti_hecc_rx_poll(struct napi_struct *napi, int quota)
+{
+	struct net_device *ndev = napi->dev;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	u32 num_pkts = 0;
+	u32 mbx_mask;
+	unsigned long pending_pkts, flags;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	while ((pending_pkts = hecc_read(priv, HECC_CANRMP)) &&
+		num_pkts < quota) {
+		mbx_mask = BIT(priv->rx_next); /* next rx mailbox to process */
+		if (mbx_mask & pending_pkts) {
+			if (ti_hecc_rx_pkt(priv, priv->rx_next) < 0)
+				return num_pkts;
+			++num_pkts;
+		} else if (priv->rx_next > HECC_RX_BUFFER_MBOX) {
+			break; /* pkt not received yet */
+		}
+		--priv->rx_next;
+		if (priv->rx_next == HECC_RX_BUFFER_MBOX) {
+			/* enable high bank mailboxes */
+			spin_lock_irqsave(&priv->mbx_lock, flags);
+			mbx_mask = hecc_read(priv, HECC_CANME);
+			mbx_mask |= HECC_RX_HIGH_MBOX_MASK;
+			hecc_write(priv, HECC_CANME, mbx_mask);
+			spin_unlock_irqrestore(&priv->mbx_lock, flags);
+		} else if (priv->rx_next == HECC_MAX_TX_MBOX - 1) {
+			priv->rx_next = HECC_RX_FIRST_MBOX;
+			break;
+		}
+	}
+
+	/* Enable packet interrupt if all pkts are handled */
+	if (hecc_read(priv, HECC_CANRMP) == 0) {
+		napi_complete(napi);
+		/* Re-enable RX mailbox interrupts */
+		mbx_mask = hecc_read(priv, HECC_CANMIM);
+		mbx_mask |= HECC_TX_MBOX_MASK;
+		hecc_write(priv, HECC_CANMIM, mbx_mask);
+	}
+
+	return num_pkts;
+}
+
+static int ti_hecc_error(struct net_device *ndev, int int_status,
+	int err_status)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	struct can_frame *cf;
+	struct sk_buff *skb;
+
+	/* propogate the error condition to the can stack */
+	skb = alloc_can_err_skb(ndev, &cf);
+	if (!skb) {
+		if (printk_ratelimit())
+			dev_err(priv->ndev->dev.parent,
+				"ti_hecc_error: alloc_can_err_skb() failed\n");
+		return -ENOMEM;
+	}
+
+	if (int_status & HECC_CANGIF_WLIF) { /* warning level int */
+		if ((int_status & HECC_CANGIF_BOIF) == 0) {
+			priv->can.state = CAN_STATE_ERROR_WARNING;
+			++priv->can.can_stats.error_warning;
+			cf->can_id |= CAN_ERR_CRTL;
+			if (hecc_read(priv, HECC_CANTEC) > 96)
+				cf->data[1] |= CAN_ERR_CRTL_TX_WARNING;
+			if (hecc_read(priv, HECC_CANREC) > 96)
+				cf->data[1] |= CAN_ERR_CRTL_RX_WARNING;
+		}
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_EW);
+		dev_dbg(priv->ndev->dev.parent, "Error Warning interrupt\n");
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+	}
+
+	if (int_status & HECC_CANGIF_EPIF) { /* error passive int */
+		if ((int_status & HECC_CANGIF_BOIF) == 0) {
+			priv->can.state = CAN_STATE_ERROR_PASSIVE;
+			++priv->can.can_stats.error_passive;
+			cf->can_id |= CAN_ERR_CRTL;
+			if (hecc_read(priv, HECC_CANTEC) > 127)
+				cf->data[1] |= CAN_ERR_CRTL_TX_PASSIVE;
+			if (hecc_read(priv, HECC_CANREC) > 127)
+				cf->data[1] |= CAN_ERR_CRTL_RX_PASSIVE;
+		}
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_EP);
+		dev_dbg(priv->ndev->dev.parent, "Error passive interrupt\n");
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+	}
+
+	/*
+	 * Need to check busoff condition in error status register too to
+	 * ensure warning interrupts don't hog the system
+	 */
+	if ((int_status & HECC_CANGIF_BOIF) || (err_status & HECC_CANES_BO)) {
+		priv->can.state = CAN_STATE_BUS_OFF;
+		cf->can_id |= CAN_ERR_BUSOFF;
+		hecc_set_bit(priv, HECC_CANES, HECC_CANES_BO);
+		hecc_clear_bit(priv, HECC_CANMC, HECC_CANMC_CCR);
+		/* Disable all interrupts in bus-off to avoid int hog */
+		hecc_write(priv, HECC_CANGIM, 0);
+		can_bus_off(ndev);
+	}
+
+	if (err_status & HECC_BUS_ERROR) {
+		++priv->can.can_stats.bus_error;
+		cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
+		cf->data[2] |= CAN_ERR_PROT_UNSPEC;
+		if (err_status & HECC_CANES_FE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_FE);
+			cf->data[2] |= CAN_ERR_PROT_FORM;
+		}
+		if (err_status & HECC_CANES_BE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_BE);
+			cf->data[2] |= CAN_ERR_PROT_BIT;
+		}
+		if (err_status & HECC_CANES_SE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_SE);
+			cf->data[2] |= CAN_ERR_PROT_STUFF;
+		}
+		if (err_status & HECC_CANES_CRCE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_CRCE);
+			cf->data[2] |= CAN_ERR_PROT_LOC_CRC_SEQ |
+					CAN_ERR_PROT_LOC_CRC_DEL;
+		}
+		if (err_status & HECC_CANES_ACKE) {
+			hecc_set_bit(priv, HECC_CANES, HECC_CANES_ACKE);
+			cf->data[2] |= CAN_ERR_PROT_LOC_ACK |
+					CAN_ERR_PROT_LOC_ACK_DEL;
+		}
+	}
+
+	netif_receive_skb(skb);
+	stats->rx_packets++;
+	stats->rx_bytes += cf->can_dlc;
+	return 0;
+}
+
+static irqreturn_t ti_hecc_interrupt(int irq, void *dev_id)
+{
+	struct net_device *ndev = (struct net_device *)dev_id;
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	struct net_device_stats *stats = &ndev->stats;
+	u32 mbxno, mbx_mask, int_status, err_status;
+	unsigned long ack, flags;
+
+	int_status = hecc_read(priv,
+		(priv->int_line) ? HECC_CANGIF1 : HECC_CANGIF0);
+
+	if (!int_status)
+		return IRQ_NONE;
+
+	err_status = hecc_read(priv, HECC_CANES);
+	if (err_status & (HECC_BUS_ERROR | HECC_CANES_BO |
+		HECC_CANES_EP | HECC_CANES_EW))
+			ti_hecc_error(ndev, int_status, err_status);
+
+	if (int_status & HECC_CANGIF_GMIF) {
+		while (priv->tx_tail - priv->tx_head > 0) {
+			mbxno = get_tx_tail_mb(priv);
+			mbx_mask = BIT(mbxno);
+			if (!(mbx_mask & hecc_read(priv, HECC_CANTA)))
+				break;
+			hecc_clear_bit(priv, HECC_CANMIM, mbx_mask);
+			hecc_write(priv, HECC_CANTA, mbx_mask);
+			spin_lock_irqsave(&priv->mbx_lock, flags);
+			hecc_clear_bit(priv, HECC_CANME, mbx_mask);
+			spin_unlock_irqrestore(&priv->mbx_lock, flags);
+			stats->tx_bytes += hecc_read_mbx(priv, mbxno,
+						HECC_CANMCF) & 0xF;
+			stats->tx_packets++;
+			can_get_echo_skb(ndev, mbxno);
+			--priv->tx_tail;
+		}
+
+		/* restart queue if wrap-up or if queue stalled on last pkt */
+		if (((priv->tx_head == priv->tx_tail) &&
+		((priv->tx_head & HECC_TX_MASK) != HECC_TX_MASK)) ||
+		(((priv->tx_tail & HECC_TX_MASK) == HECC_TX_MASK) &&
+		((priv->tx_head & HECC_TX_MASK) == HECC_TX_MASK)))
+			netif_wake_queue(ndev);
+
+		/* Disable RX mailbox interrupts and let NAPI reenable them */
+		if (hecc_read(priv, HECC_CANRMP)) {
+			ack = hecc_read(priv, HECC_CANMIM);
+			ack &= BIT(HECC_MAX_TX_MBOX) - 1;
+			hecc_write(priv, HECC_CANMIM, ack);
+			napi_schedule(&priv->napi);
+		}
+	}
+
+	/* clear all interrupt conditions - read back to avoid spurious ints */
+	if (priv->int_line) {
+		hecc_write(priv, HECC_CANGIF1, HECC_SET_REG);
+		int_status = hecc_read(priv, HECC_CANGIF1);
+	} else {
+		hecc_write(priv, HECC_CANGIF0, HECC_SET_REG);
+		int_status = hecc_read(priv, HECC_CANGIF0);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ti_hecc_open(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+	int err;
+
+	err = request_irq(ndev->irq, ti_hecc_interrupt, IRQF_SHARED,
+			ndev->name, ndev);
+	if (err) {
+		dev_err(ndev->dev.parent, "error requesting interrupt\n");
+		return err;
+	}
+
+	/* Open common can device */
+	err = open_candev(ndev);
+	if (err) {
+		dev_err(ndev->dev.parent, "open_candev() failed %d\n", err);
+		free_irq(ndev->irq, ndev);
+		return err;
+	}
+
+	clk_enable(priv->clk);
+	ti_hecc_start(ndev);
+	napi_enable(&priv->napi);
+	netif_start_queue(ndev);
+
+	return 0;
+}
+
+static int ti_hecc_close(struct net_device *ndev)
+{
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	netif_stop_queue(ndev);
+	napi_disable(&priv->napi);
+	ti_hecc_stop(ndev);
+	free_irq(ndev->irq, ndev);
+	clk_disable(priv->clk);
+	close_candev(ndev);
+
+	return 0;
+}
+
+static const struct net_device_ops ti_hecc_netdev_ops = {
+	.ndo_open		= ti_hecc_open,
+	.ndo_stop		= ti_hecc_close,
+	.ndo_start_xmit		= ti_hecc_xmit,
+};
+
+static int ti_hecc_probe(struct platform_device *pdev)
+{
+	struct net_device *ndev = (struct net_device *)0;
+	struct ti_hecc_priv *priv;
+	struct ti_hecc_platform_data *pdata;
+	struct resource *mem, *irq;
+	void __iomem *addr;
+	int err = -ENODEV;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data\n");
+		goto probe_exit;
+	}
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!mem) {
+		dev_err(&pdev->dev, "No mem resources\n");
+		goto probe_exit;
+	}
+	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!irq) {
+		dev_err(&pdev->dev, "No irq resource\n");
+		goto probe_exit;
+	}
+	if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) {
+		dev_err(&pdev->dev, "HECC region already claimed\n");
+		err = -EBUSY;
+		goto probe_exit;
+	}
+	addr = ioremap(mem->start, resource_size(mem));
+	if (!addr) {
+		dev_err(&pdev->dev, "ioremap failed\n");
+		err = -ENOMEM;
+		goto probe_exit_free_region;
+	}
+
+	ndev = alloc_candev(sizeof(struct ti_hecc_priv), HECC_MAX_TX_MBOX);
+	if (!ndev) {
+		dev_err(&pdev->dev, "alloc_candev failed\n");
+		err = -ENOMEM;
+		goto probe_exit_iounmap;
+	}
+
+	priv = netdev_priv(ndev);
+	priv->ndev = ndev;
+	priv->base = addr;
+	priv->scc_ram_offset = pdata->scc_ram_offset;
+	priv->hecc_ram_offset = pdata->hecc_ram_offset;
+	priv->mbx_offset = pdata->mbx_offset;
+	priv->int_line = pdata->int_line;
+
+	priv->can.bittiming_const = &ti_hecc_bittiming_const;
+	priv->can.do_set_mode = ti_hecc_do_set_mode;
+	priv->can.do_get_state = ti_hecc_get_state;
+
+	ndev->irq = irq->start;
+	ndev->flags |= IFF_ECHO;
+	platform_set_drvdata(pdev, ndev);
+	SET_NETDEV_DEV(ndev, &pdev->dev);
+	ndev->netdev_ops = &ti_hecc_netdev_ops;
+
+	priv->clk = clk_get(&pdev->dev, "hecc_ck");
+	if (IS_ERR(priv->clk)) {
+		dev_err(&pdev->dev, "No clock available\n");
+		err = PTR_ERR(priv->clk);
+		priv->clk = NULL;
+		goto probe_exit_candev;
+	}
+	priv->can.clock.freq = clk_get_rate(priv->clk);
+	netif_napi_add(ndev, &priv->napi, ti_hecc_rx_poll,
+		HECC_DEF_NAPI_WEIGHT);
+
+	err = register_candev(ndev);
+	if (err) {
+		dev_err(&pdev->dev, "register_candev() failed\n");
+		goto probe_exit_clk;
+	}
+	dev_info(&pdev->dev, "device registered (reg_base=%p, irq=%u)\n",
+		priv->base, (u32) ndev->irq);
+
+	return 0;
+
+probe_exit_clk:
+	clk_put(priv->clk);
+probe_exit_candev:
+	free_candev(ndev);
+probe_exit_iounmap:
+	iounmap(addr);
+probe_exit_free_region:
+	release_mem_region(mem->start, resource_size(mem));
+probe_exit:
+	return err;
+}
+
+static int __devexit ti_hecc_remove(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct net_device *ndev = platform_get_drvdata(pdev);
+	struct ti_hecc_priv *priv = netdev_priv(ndev);
+
+	clk_put(priv->clk);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	iounmap(priv->base);
+	release_mem_region(res->start, resource_size(res));
+	unregister_candev(ndev);
+	free_candev(ndev);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+/* TI HECC netdevice driver: platform driver structure */
+static struct platform_driver ti_hecc_driver = {
+	.driver = {
+		.name    = DRV_NAME,
+		.owner   = THIS_MODULE,
+	},
+	.probe = ti_hecc_probe,
+	.remove = __devexit_p(ti_hecc_remove),
+};
+
+static int __init ti_hecc_init_driver(void)
+{
+	printk(KERN_INFO DRV_DESC "\n");
+	return platform_driver_register(&ti_hecc_driver);
+}
+module_init(ti_hecc_init_driver);
+
+static void __exit ti_hecc_exit_driver(void)
+{
+	printk(KERN_INFO DRV_DESC " unloaded\n");
+	platform_driver_unregister(&ti_hecc_driver);
+}
+module_exit(ti_hecc_exit_driver);
+
+MODULE_AUTHOR("Anant Gole <anantgole@ti.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION(DRV_DESC);
diff --git a/drivers/net/can/usb/ems_usb.c b/drivers/net/can/usb/ems_usb.c
index 9012e0a..3685f3e 100644
--- a/drivers/net/can/usb/ems_usb.c
+++ b/drivers/net/can/usb/ems_usb.c
@@ -232,7 +232,7 @@
 #define INTR_IN_BUFFER_SIZE 4
 
 #define MAX_RX_URBS 10
-#define MAX_TX_URBS CAN_ECHO_SKB_MAX
+#define MAX_TX_URBS 10
 
 struct ems_usb;
 
@@ -311,14 +311,10 @@
 	int i;
 	struct net_device_stats *stats = &dev->netdev->stats;
 
-	skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+	skb = alloc_can_skb(dev->netdev, &cf);
 	if (skb == NULL)
 		return;
 
-	skb->protocol = htons(ETH_P_CAN);
-
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-
 	cf->can_id = msg->msg.can_msg.id;
 	cf->can_dlc = min_t(u8, msg->msg.can_msg.length, 8);
 
@@ -346,18 +342,10 @@
 	struct sk_buff *skb;
 	struct net_device_stats *stats = &dev->netdev->stats;
 
-	skb = netdev_alloc_skb(dev->netdev, sizeof(struct can_frame));
+	skb = alloc_can_err_skb(dev->netdev, &cf);
 	if (skb == NULL)
 		return;
 
-	skb->protocol = htons(ETH_P_CAN);
-
-	cf = (struct can_frame *)skb_put(skb, sizeof(struct can_frame));
-	memset(cf, 0, sizeof(struct can_frame));
-
-	cf->can_id = CAN_ERR_FLAG;
-	cf->can_dlc = CAN_ERR_DLC;
-
 	if (msg->type == CPC_MSG_TYPE_CAN_STATE) {
 		u8 state = msg->msg.can_state;
 
@@ -1012,7 +1000,7 @@
 	struct ems_usb *dev;
 	int i, err = -ENOMEM;
 
-	netdev = alloc_candev(sizeof(struct ems_usb));
+	netdev = alloc_candev(sizeof(struct ems_usb), MAX_TX_URBS);
 	if (!netdev) {
 		dev_err(netdev->dev.parent, "Couldn't alloc candev\n");
 		return -ENOMEM;
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 3bf1b04..e503384 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -33,10 +33,16 @@
 #include <net/route.h>
 #include <net/ipv6.h>
 #include <net/ip6_route.h>
+#include <net/ip6_checksum.h>
 #include <scsi/iscsi_if.h>
 
 #include "cnic_if.h"
 #include "bnx2.h"
+#include "bnx2x_reg.h"
+#include "bnx2x_fw_defs.h"
+#include "bnx2x_hsi.h"
+#include "../scsi/bnx2i/57xx_iscsi_constants.h"
+#include "../scsi/bnx2i/57xx_iscsi_hsi.h"
 #include "cnic.h"
 #include "cnic_defs.h"
 
@@ -59,6 +65,7 @@
 static struct cnic_ulp_ops *cnic_ulp_tbl[MAX_CNIC_ULP_TYPE];
 
 static int cnic_service_bnx2(void *, void *);
+static int cnic_service_bnx2x(void *, void *);
 static int cnic_ctl(void *, struct cnic_ctl_info *);
 
 static struct cnic_ops cnic_bnx2_ops = {
@@ -67,9 +74,14 @@
 	.cnic_ctl	= cnic_ctl,
 };
 
-static void cnic_shutdown_bnx2_rx_ring(struct cnic_dev *);
-static void cnic_init_bnx2_tx_ring(struct cnic_dev *);
-static void cnic_init_bnx2_rx_ring(struct cnic_dev *);
+static struct cnic_ops cnic_bnx2x_ops = {
+	.cnic_owner	= THIS_MODULE,
+	.cnic_handler	= cnic_service_bnx2x,
+	.cnic_ctl	= cnic_ctl,
+};
+
+static void cnic_shutdown_rings(struct cnic_dev *);
+static void cnic_init_rings(struct cnic_dev *);
 static int cnic_cm_set_pg(struct cnic_sock *);
 
 static int cnic_uio_open(struct uio_info *uinfo, struct inode *inode)
@@ -83,10 +95,16 @@
 	if (cp->uio_dev != -1)
 		return -EBUSY;
 
+	rtnl_lock();
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
+		rtnl_unlock();
+		return -ENODEV;
+	}
+
 	cp->uio_dev = iminor(inode);
 
-	cnic_init_bnx2_tx_ring(dev);
-	cnic_init_bnx2_rx_ring(dev);
+	cnic_init_rings(dev);
+	rtnl_unlock();
 
 	return 0;
 }
@@ -96,7 +114,7 @@
 	struct cnic_dev *dev = uinfo->priv;
 	struct cnic_local *cp = dev->cnic_priv;
 
-	cnic_shutdown_bnx2_rx_ring(dev);
+	cnic_shutdown_rings(dev);
 
 	cp->uio_dev = -1;
 	return 0;
@@ -162,6 +180,36 @@
 	ethdev->drv_ctl(dev->netdev, &info);
 }
 
+static void cnic_ctx_tbl_wr(struct cnic_dev *dev, u32 off, dma_addr_t addr)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_io *io = &info.data.io;
+
+	info.cmd = DRV_CTL_CTXTBL_WR_CMD;
+	io->offset = off;
+	io->dma_addr = addr;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
+static void cnic_ring_ctl(struct cnic_dev *dev, u32 cid, u32 cl_id, int start)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	struct drv_ctl_info info;
+	struct drv_ctl_l2_ring *ring = &info.data.ring;
+
+	if (start)
+		info.cmd = DRV_CTL_START_L2_CMD;
+	else
+		info.cmd = DRV_CTL_STOP_L2_CMD;
+
+	ring->cid = cid;
+	ring->client_id = cl_id;
+	ethdev->drv_ctl(dev->netdev, &info);
+}
+
 static void cnic_reg_wr_ind(struct cnic_dev *dev, u32 off, u32 val)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -204,6 +252,19 @@
 	ethdev->drv_ctl(dev->netdev, &info);
 }
 
+static int cnic_get_l5_cid(struct cnic_local *cp, u32 cid, u32 *l5_cid)
+{
+	u32 i;
+
+	for (i = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		if (cp->ctx_tbl[i].cid == cid) {
+			*l5_cid = i;
+			return 0;
+		}
+	}
+	return -EINVAL;
+}
+
 static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 			   struct cnic_sock *csk)
 {
@@ -347,7 +408,7 @@
 {
 	struct cnic_dev *dev;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_register_driver: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -393,7 +454,7 @@
 	struct cnic_ulp_ops *ulp_ops;
 	int i = 0;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_driver: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -449,7 +510,7 @@
 	struct cnic_local *cp = dev->cnic_priv;
 	struct cnic_ulp_ops *ulp_ops;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_register_device: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -490,7 +551,7 @@
 	struct cnic_local *cp = dev->cnic_priv;
 	int i = 0;
 
-	if (ulp_type >= MAX_CNIC_ULP_TYPE) {
+	if (ulp_type < 0 || ulp_type >= MAX_CNIC_ULP_TYPE) {
 		printk(KERN_ERR PFX "cnic_unregister_device: Bad type %d\n",
 		       ulp_type);
 		return -EINVAL;
@@ -635,6 +696,20 @@
 	}
 }
 
+static void cnic_setup_page_tbl_le(struct cnic_dev *dev, struct cnic_dma *dma)
+{
+	int i;
+	u32 *page_table = dma->pgtbl;
+
+	for (i = 0; i < dma->num_pages; i++) {
+		/* Each entry needs to be in little endian format. */
+		*page_table = dma->pg_map_arr[i] & 0xffffffff;
+		page_table++;
+		*page_table = (u32) ((u64) dma->pg_map_arr[i] >> 32);
+		page_table++;
+	}
+}
+
 static int cnic_alloc_dma(struct cnic_dev *dev, struct cnic_dma *dma,
 			  int pages, int use_pg_tbl)
 {
@@ -675,6 +750,21 @@
 	return -ENOMEM;
 }
 
+static void cnic_free_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		if (cp->ctx_arr[i].ctx) {
+			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
+					    cp->ctx_arr[i].ctx,
+					    cp->ctx_arr[i].mapping);
+			cp->ctx_arr[i].ctx = NULL;
+		}
+	}
+}
+
 static void cnic_free_resc(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -702,14 +792,7 @@
 		cp->l2_ring = NULL;
 	}
 
-	for (i = 0; i < cp->ctx_blks; i++) {
-		if (cp->ctx_arr[i].ctx) {
-			pci_free_consistent(dev->pcidev, cp->ctx_blk_size,
-					    cp->ctx_arr[i].ctx,
-					    cp->ctx_arr[i].mapping);
-			cp->ctx_arr[i].ctx = NULL;
-		}
-	}
+	cnic_free_context(dev);
 	kfree(cp->ctx_arr);
 	cp->ctx_arr = NULL;
 	cp->ctx_blks = 0;
@@ -717,6 +800,7 @@
 	cnic_free_dma(dev, &cp->gbl_buf_info);
 	cnic_free_dma(dev, &cp->conn_buf_info);
 	cnic_free_dma(dev, &cp->kwq_info);
+	cnic_free_dma(dev, &cp->kwq_16_data_info);
 	cnic_free_dma(dev, &cp->kcq_info);
 	kfree(cp->iscsi_tbl);
 	cp->iscsi_tbl = NULL;
@@ -808,14 +892,20 @@
 	uinfo->mem[0].size = dev->netdev->mem_end - dev->netdev->mem_start;
 	uinfo->mem[0].memtype = UIO_MEM_PHYS;
 
-	uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
 	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		uinfo->mem[1].addr = (unsigned long) cp->status_blk & PAGE_MASK;
 		if (cp->ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX)
 			uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE * 9;
 		else
 			uinfo->mem[1].size = BNX2_SBLK_MSIX_ALIGN_SIZE;
 
 		uinfo->name = "bnx2_cnic";
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		uinfo->mem[1].addr = (unsigned long) cp->bnx2x_def_status_blk &
+			PAGE_MASK;
+		uinfo->mem[1].size = sizeof(struct host_def_status_block);
+
+		uinfo->name = "bnx2x_cnic";
 	}
 
 	uinfo->mem[1].memtype = UIO_MEM_LOGICAL;
@@ -880,6 +970,151 @@
 	return ret;
 }
 
+static int cnic_alloc_bnx2x_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int ctx_blk_size = cp->ethdev->ctx_blk_size;
+	int total_mem, blks, i, cid_space;
+
+	if (BNX2X_ISCSI_START_CID < ethdev->starting_cid)
+		return -EINVAL;
+
+	cid_space = MAX_ISCSI_TBL_SZ +
+		    (BNX2X_ISCSI_START_CID - ethdev->starting_cid);
+
+	total_mem = BNX2X_CONTEXT_MEM_SIZE * cid_space;
+	blks = total_mem / ctx_blk_size;
+	if (total_mem % ctx_blk_size)
+		blks++;
+
+	if (blks > cp->ethdev->ctx_tbl_len)
+		return -ENOMEM;
+
+	cp->ctx_arr = kzalloc(blks * sizeof(struct cnic_ctx), GFP_KERNEL);
+	if (cp->ctx_arr == NULL)
+		return -ENOMEM;
+
+	cp->ctx_blks = blks;
+	cp->ctx_blk_size = ctx_blk_size;
+	if (BNX2X_CHIP_IS_E1H(cp->chip_id))
+		cp->ctx_align = 0;
+	else
+		cp->ctx_align = ctx_blk_size;
+
+	cp->cids_per_blk = ctx_blk_size / BNX2X_CONTEXT_MEM_SIZE;
+
+	for (i = 0; i < blks; i++) {
+		cp->ctx_arr[i].ctx =
+			pci_alloc_consistent(dev->pcidev, cp->ctx_blk_size,
+					     &cp->ctx_arr[i].mapping);
+		if (cp->ctx_arr[i].ctx == NULL)
+			return -ENOMEM;
+
+		if (cp->ctx_align && cp->ctx_blk_size == ctx_blk_size) {
+			if (cp->ctx_arr[i].mapping & (cp->ctx_align - 1)) {
+				cnic_free_context(dev);
+				cp->ctx_blk_size += cp->ctx_align;
+				i = -1;
+				continue;
+			}
+		}
+	}
+	return 0;
+}
+
+static int cnic_alloc_bnx2x_resc(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int i, j, n, ret, pages;
+	struct cnic_dma *kwq_16_dma = &cp->kwq_16_data_info;
+
+	cp->iscsi_tbl = kzalloc(sizeof(struct cnic_iscsi) * MAX_ISCSI_TBL_SZ,
+				GFP_KERNEL);
+	if (!cp->iscsi_tbl)
+		goto error;
+
+	cp->ctx_tbl = kzalloc(sizeof(struct cnic_context) *
+				  MAX_CNIC_L5_CONTEXT, GFP_KERNEL);
+	if (!cp->ctx_tbl)
+		goto error;
+
+	for (i = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		cp->ctx_tbl[i].proto.iscsi = &cp->iscsi_tbl[i];
+		cp->ctx_tbl[i].ulp_proto_id = CNIC_ULP_ISCSI;
+	}
+
+	pages = PAGE_ALIGN(MAX_CNIC_L5_CONTEXT * CNIC_KWQ16_DATA_SIZE) /
+		PAGE_SIZE;
+
+	ret = cnic_alloc_dma(dev, kwq_16_dma, pages, 0);
+	if (ret)
+		return -ENOMEM;
+
+	n = PAGE_SIZE / CNIC_KWQ16_DATA_SIZE;
+	for (i = 0, j = 0; i < MAX_ISCSI_TBL_SZ; i++) {
+		long off = CNIC_KWQ16_DATA_SIZE * (i % n);
+
+		cp->ctx_tbl[i].kwqe_data = kwq_16_dma->pg_arr[j] + off;
+		cp->ctx_tbl[i].kwqe_data_mapping = kwq_16_dma->pg_map_arr[j] +
+						   off;
+
+		if ((i % n) == (n - 1))
+			j++;
+	}
+
+	ret = cnic_alloc_dma(dev, &cp->kcq_info, KCQ_PAGE_CNT, 0);
+	if (ret)
+		goto error;
+	cp->kcq = (struct kcqe **) cp->kcq_info.pg_arr;
+
+	for (i = 0; i < KCQ_PAGE_CNT; i++) {
+		struct bnx2x_bd_chain_next *next =
+			(struct bnx2x_bd_chain_next *)
+			&cp->kcq[i][MAX_KCQE_CNT];
+		int j = i + 1;
+
+		if (j >= KCQ_PAGE_CNT)
+			j = 0;
+		next->addr_hi = (u64) cp->kcq_info.pg_map_arr[j] >> 32;
+		next->addr_lo = cp->kcq_info.pg_map_arr[j] & 0xffffffff;
+	}
+
+	pages = PAGE_ALIGN(BNX2X_ISCSI_NUM_CONNECTIONS *
+			   BNX2X_ISCSI_CONN_BUF_SIZE) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &cp->conn_buf_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(BNX2X_ISCSI_GLB_BUF_SIZE) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &cp->gbl_buf_info, pages, 0);
+	if (ret)
+		goto error;
+
+	ret = cnic_alloc_bnx2x_context(dev);
+	if (ret)
+		goto error;
+
+	cp->bnx2x_status_blk = cp->status_blk;
+	cp->bnx2x_def_status_blk = cp->ethdev->irq_arr[1].status_blk;
+
+	cp->l2_rx_ring_size = 15;
+
+	ret = cnic_alloc_l2_rings(dev, 4);
+	if (ret)
+		goto error;
+
+	ret = cnic_alloc_uio(dev);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	cnic_free_resc(dev);
+	return -ENOMEM;
+}
+
 static inline u32 cnic_kwq_avail(struct cnic_local *cp)
 {
 	return cp->max_kwq_idx -
@@ -921,6 +1156,880 @@
 	return 0;
 }
 
+static void *cnic_get_kwqe_16_data(struct cnic_local *cp, u32 l5_cid,
+				   union l5cm_specific_data *l5_data)
+{
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	dma_addr_t map;
+
+	map = ctx->kwqe_data_mapping;
+	l5_data->phy_address.lo = (u64) map & 0xffffffff;
+	l5_data->phy_address.hi = (u64) map >> 32;
+	return ctx->kwqe_data;
+}
+
+static int cnic_submit_kwqe_16(struct cnic_dev *dev, u32 cmd, u32 cid,
+				u32 type, union l5cm_specific_data *l5_data)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l5cm_spe kwqe;
+	struct kwqe_16 *kwq[1];
+	int ret;
+
+	kwqe.hdr.conn_and_cmd_data =
+		cpu_to_le32(((cmd << SPE_HDR_CMD_ID_SHIFT) |
+			     BNX2X_HW_CID(cid, cp->func)));
+	kwqe.hdr.type = cpu_to_le16(type);
+	kwqe.hdr.reserved = 0;
+	kwqe.data.phy_address.lo = cpu_to_le32(l5_data->phy_address.lo);
+	kwqe.data.phy_address.hi = cpu_to_le32(l5_data->phy_address.hi);
+
+	kwq[0] = (struct kwqe_16 *) &kwqe;
+
+	spin_lock_bh(&cp->cnic_ulp_lock);
+	ret = cp->ethdev->drv_submit_kwqes_16(dev->netdev, kwq, 1);
+	spin_unlock_bh(&cp->cnic_ulp_lock);
+
+	if (ret == 1)
+		return 0;
+
+	return -EBUSY;
+}
+
+static void cnic_reply_bnx2x_kcqes(struct cnic_dev *dev, int ulp_type,
+				   struct kcqe *cqes[], u32 num_cqes)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_ulp_ops *ulp_ops;
+
+	rcu_read_lock();
+	ulp_ops = rcu_dereference(cp->ulp_ops[ulp_type]);
+	if (likely(ulp_ops)) {
+		ulp_ops->indicate_kcqes(cp->ulp_handle[ulp_type],
+					  cqes, num_cqes);
+	}
+	rcu_read_unlock();
+}
+
+static int cnic_bnx2x_iscsi_init1(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_init1 *req1 = (struct iscsi_kwqe_init1 *) kwqe;
+	int func = cp->func, pages;
+	int hq_bds;
+
+	cp->num_iscsi_tasks = req1->num_tasks_per_conn;
+	cp->num_ccells = req1->num_ccells_per_conn;
+	cp->task_array_size = BNX2X_ISCSI_TASK_CONTEXT_SIZE *
+			      cp->num_iscsi_tasks;
+	cp->r2tq_size = cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS *
+			BNX2X_ISCSI_R2TQE_SIZE;
+	cp->hq_size = cp->num_ccells * BNX2X_ISCSI_HQ_BD_SIZE;
+	pages = PAGE_ALIGN(cp->hq_size) / PAGE_SIZE;
+	hq_bds = pages * (PAGE_SIZE / BNX2X_ISCSI_HQ_BD_SIZE);
+	cp->num_cqs = req1->num_cqs;
+
+	if (!dev->max_iscsi_conn)
+		return 0;
+
+	/* init Tstorm RAM */
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM + TSTORM_ISCSI_RQ_SIZE_OFFSET(func),
+		  req1->rq_num_wqes);
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM + TSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM +
+		  TSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+
+	/* init Ustorm RAM */
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_RQ_BUFFER_SIZE_OFFSET(func),
+		  req1->rq_buffer_size);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_USTRORM_INTMEM +
+		 USTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_RQ_SIZE_OFFSET(func),
+		  req1->rq_num_wqes);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_CQ_SIZE_OFFSET(func),
+		  req1->cq_num_wqes);
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM + USTORM_ISCSI_R2TQ_SIZE_OFFSET(func),
+		  cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS);
+
+	/* init Xstorm RAM */
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_HQ_SIZE_OFFSET(func),
+		  hq_bds);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_SQ_SIZE_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM + XSTORM_ISCSI_R2TQ_SIZE_OFFSET(func),
+		  cp->num_iscsi_tasks * BNX2X_ISCSI_MAX_PENDING_R2TS);
+
+	/* init Cstorm RAM */
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_PAGE_SIZE_OFFSET(func),
+		  PAGE_SIZE);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		 CSTORM_ISCSI_PAGE_SIZE_LOG_OFFSET(func), PAGE_SHIFT);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_ISCSI_NUM_OF_TASKS_OFFSET(func),
+		  req1->num_tasks_per_conn);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_CQ_SIZE_OFFSET(func),
+		  req1->cq_num_wqes);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM + CSTORM_ISCSI_HQ_SIZE_OFFSET(func),
+		  hq_bds);
+
+	return 0;
+}
+
+static int cnic_bnx2x_iscsi_init2(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct iscsi_kwqe_init2 *req2 = (struct iscsi_kwqe_init2 *) kwqe;
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = cp->func;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	if (!dev->max_iscsi_conn) {
+		kcqe.completion_status =
+			ISCSI_KCQE_COMPLETION_STATUS_ISCSI_NOT_SUPPORTED;
+		goto done;
+	}
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		TSTORM_ISCSI_ERROR_BITMAP_OFFSET(func), req2->error_bit_map[0]);
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		TSTORM_ISCSI_ERROR_BITMAP_OFFSET(func) + 4,
+		req2->error_bit_map[1]);
+
+	CNIC_WR16(dev, BAR_USTRORM_INTMEM +
+		  USTORM_ISCSI_CQ_SQN_SIZE_OFFSET(func), req2->max_cq_sqn);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_ERROR_BITMAP_OFFSET(func), req2->error_bit_map[0]);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_ERROR_BITMAP_OFFSET(func) + 4,
+		req2->error_bit_map[1]);
+
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_ISCSI_CQ_SQN_SIZE_OFFSET(func), req2->max_cq_sqn);
+
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+
+done:
+	kcqe.op_code = ISCSI_KCQE_OPCODE_INIT;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+
+	return 0;
+}
+
+static void cnic_free_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+
+	if (ctx->ulp_proto_id == CNIC_ULP_ISCSI) {
+		struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+
+		cnic_free_dma(dev, &iscsi->hq_info);
+		cnic_free_dma(dev, &iscsi->r2tq_info);
+		cnic_free_dma(dev, &iscsi->task_array_info);
+	}
+	cnic_free_id(&cp->cid_tbl, ctx->cid);
+	ctx->cid = 0;
+}
+
+static int cnic_alloc_bnx2x_conn_resc(struct cnic_dev *dev, u32 l5_cid)
+{
+	u32 cid;
+	int ret, pages;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+
+	cid = cnic_alloc_new_id(&cp->cid_tbl);
+	if (cid == -1) {
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	ctx->cid = cid;
+	pages = PAGE_ALIGN(cp->task_array_size) / PAGE_SIZE;
+
+	ret = cnic_alloc_dma(dev, &iscsi->task_array_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(cp->r2tq_size) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &iscsi->r2tq_info, pages, 1);
+	if (ret)
+		goto error;
+
+	pages = PAGE_ALIGN(cp->hq_size) / PAGE_SIZE;
+	ret = cnic_alloc_dma(dev, &iscsi->hq_info, pages, 1);
+	if (ret)
+		goto error;
+
+	return 0;
+
+error:
+	cnic_free_bnx2x_conn_resc(dev, l5_cid);
+	return ret;
+}
+
+static void *cnic_get_bnx2x_ctx(struct cnic_dev *dev, u32 cid, int init,
+				struct regpair *ctx_addr)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int blk = (cid - ethdev->starting_cid) / cp->cids_per_blk;
+	int off = (cid - ethdev->starting_cid) % cp->cids_per_blk;
+	unsigned long align_off = 0;
+	dma_addr_t ctx_map;
+	void *ctx;
+
+	if (cp->ctx_align) {
+		unsigned long mask = cp->ctx_align - 1;
+
+		if (cp->ctx_arr[blk].mapping & mask)
+			align_off = cp->ctx_align -
+				    (cp->ctx_arr[blk].mapping & mask);
+	}
+	ctx_map = cp->ctx_arr[blk].mapping + align_off +
+		(off * BNX2X_CONTEXT_MEM_SIZE);
+	ctx = cp->ctx_arr[blk].ctx + align_off +
+	      (off * BNX2X_CONTEXT_MEM_SIZE);
+	if (init)
+		memset(ctx, 0, BNX2X_CONTEXT_MEM_SIZE);
+
+	ctx_addr->lo = ctx_map & 0xffffffff;
+	ctx_addr->hi = (u64) ctx_map >> 32;
+	return ctx;
+}
+
+static int cnic_setup_bnx2x_ctx(struct cnic_dev *dev, struct kwqe *wqes[],
+				u32 num)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_offload1 *req1 =
+			(struct iscsi_kwqe_conn_offload1 *) wqes[0];
+	struct iscsi_kwqe_conn_offload2 *req2 =
+			(struct iscsi_kwqe_conn_offload2 *) wqes[1];
+	struct iscsi_kwqe_conn_offload3 *req3;
+	struct cnic_context *ctx = &cp->ctx_tbl[req1->iscsi_conn_id];
+	struct cnic_iscsi *iscsi = ctx->proto.iscsi;
+	u32 cid = ctx->cid;
+	u32 hw_cid = BNX2X_HW_CID(cid, cp->func);
+	struct iscsi_context *ictx;
+	struct regpair context_addr;
+	int i, j, n = 2, n_max;
+
+	ctx->ctx_flags = 0;
+	if (!req2->num_additional_wqes)
+		return -EINVAL;
+
+	n_max = req2->num_additional_wqes + 2;
+
+	ictx = cnic_get_bnx2x_ctx(dev, cid, 1, &context_addr);
+	if (ictx == NULL)
+		return -ENOMEM;
+
+	req3 = (struct iscsi_kwqe_conn_offload3 *) wqes[n++];
+
+	ictx->xstorm_ag_context.hq_prod = 1;
+
+	ictx->xstorm_st_context.iscsi.first_burst_length =
+		ISCSI_DEF_FIRST_BURST_LEN;
+	ictx->xstorm_st_context.iscsi.max_send_pdu_length =
+		ISCSI_DEF_MAX_RECV_SEG_LEN;
+	ictx->xstorm_st_context.iscsi.sq_pbl_base.lo =
+		req1->sq_page_table_addr_lo;
+	ictx->xstorm_st_context.iscsi.sq_pbl_base.hi =
+		req1->sq_page_table_addr_hi;
+	ictx->xstorm_st_context.iscsi.sq_curr_pbe.lo = req2->sq_first_pte.hi;
+	ictx->xstorm_st_context.iscsi.sq_curr_pbe.hi = req2->sq_first_pte.lo;
+	ictx->xstorm_st_context.iscsi.hq_pbl_base.lo =
+		iscsi->hq_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.hq_pbl_base.hi =
+		(u64) iscsi->hq_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.hq_curr_pbe_base.lo =
+		iscsi->hq_info.pgtbl[0];
+	ictx->xstorm_st_context.iscsi.hq_curr_pbe_base.hi =
+		iscsi->hq_info.pgtbl[1];
+	ictx->xstorm_st_context.iscsi.r2tq_pbl_base.lo =
+		iscsi->r2tq_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.r2tq_pbl_base.hi =
+		(u64) iscsi->r2tq_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.r2tq_curr_pbe_base.lo =
+		iscsi->r2tq_info.pgtbl[0];
+	ictx->xstorm_st_context.iscsi.r2tq_curr_pbe_base.hi =
+		iscsi->r2tq_info.pgtbl[1];
+	ictx->xstorm_st_context.iscsi.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->xstorm_st_context.iscsi.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	ictx->xstorm_st_context.iscsi.task_pbl_cache_idx =
+		BNX2X_ISCSI_PBL_NOT_CACHED;
+	ictx->xstorm_st_context.iscsi.flags.flags |=
+		XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA;
+	ictx->xstorm_st_context.iscsi.flags.flags |=
+		XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T;
+
+	ictx->tstorm_st_context.iscsi.hdr_bytes_2_fetch = ISCSI_HEADER_SIZE;
+	/* TSTORM requires the base address of RQ DB & not PTE */
+	ictx->tstorm_st_context.iscsi.rq_db_phy_addr.lo =
+		req2->rq_page_table_addr_lo & PAGE_MASK;
+	ictx->tstorm_st_context.iscsi.rq_db_phy_addr.hi =
+		req2->rq_page_table_addr_hi;
+	ictx->tstorm_st_context.iscsi.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->tstorm_st_context.tcp.cwnd = 0x5A8;
+	ictx->tstorm_st_context.tcp.flags2 |=
+		TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN;
+
+	ictx->timers_context.flags |= ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG;
+
+	ictx->ustorm_st_context.ring.rq.pbl_base.lo =
+		req2->rq_page_table_addr_lo & 0xffffffff;
+	ictx->ustorm_st_context.ring.rq.pbl_base.hi =
+		(u64) req2->rq_page_table_addr_hi >> 32;
+	ictx->ustorm_st_context.ring.rq.curr_pbe.lo = req3->qp_first_pte[0].hi;
+	ictx->ustorm_st_context.ring.rq.curr_pbe.hi = req3->qp_first_pte[0].lo;
+	ictx->ustorm_st_context.ring.r2tq.pbl_base.lo =
+		iscsi->r2tq_info.pgtbl_map & 0xffffffff;
+	ictx->ustorm_st_context.ring.r2tq.pbl_base.hi =
+		(u64) iscsi->r2tq_info.pgtbl_map >> 32;
+	ictx->ustorm_st_context.ring.r2tq.curr_pbe.lo =
+		iscsi->r2tq_info.pgtbl[0];
+	ictx->ustorm_st_context.ring.r2tq.curr_pbe.hi =
+		iscsi->r2tq_info.pgtbl[1];
+	ictx->ustorm_st_context.ring.cq_pbl_base.lo =
+		req1->cq_page_table_addr_lo;
+	ictx->ustorm_st_context.ring.cq_pbl_base.hi =
+		req1->cq_page_table_addr_hi;
+	ictx->ustorm_st_context.ring.cq[0].cq_sn = ISCSI_INITIAL_SN;
+	ictx->ustorm_st_context.ring.cq[0].curr_pbe.lo = req2->cq_first_pte.hi;
+	ictx->ustorm_st_context.ring.cq[0].curr_pbe.hi = req2->cq_first_pte.lo;
+	ictx->ustorm_st_context.task_pbe_cache_index =
+		BNX2X_ISCSI_PBL_NOT_CACHED;
+	ictx->ustorm_st_context.task_pdu_cache_index =
+		BNX2X_ISCSI_PDU_HEADER_NOT_CACHED;
+
+	for (i = 1, j = 1; i < cp->num_cqs; i++, j++) {
+		if (j == 3) {
+			if (n >= n_max)
+				break;
+			req3 = (struct iscsi_kwqe_conn_offload3 *) wqes[n++];
+			j = 0;
+		}
+		ictx->ustorm_st_context.ring.cq[i].cq_sn = ISCSI_INITIAL_SN;
+		ictx->ustorm_st_context.ring.cq[i].curr_pbe.lo =
+			req3->qp_first_pte[j].hi;
+		ictx->ustorm_st_context.ring.cq[i].curr_pbe.hi =
+			req3->qp_first_pte[j].lo;
+	}
+
+	ictx->ustorm_st_context.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->ustorm_st_context.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	ictx->ustorm_st_context.tce_phy_addr.lo =
+		iscsi->task_array_info.pgtbl[0];
+	ictx->ustorm_st_context.tce_phy_addr.hi =
+		iscsi->task_array_info.pgtbl[1];
+	ictx->ustorm_st_context.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->ustorm_st_context.num_cqs = cp->num_cqs;
+	ictx->ustorm_st_context.negotiated_rx |= ISCSI_DEF_MAX_RECV_SEG_LEN;
+	ictx->ustorm_st_context.negotiated_rx_and_flags |=
+		ISCSI_DEF_MAX_BURST_LEN;
+	ictx->ustorm_st_context.negotiated_rx |=
+		ISCSI_DEFAULT_MAX_OUTSTANDING_R2T <<
+		USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS_SHIFT;
+
+	ictx->cstorm_st_context.hq_pbl_base.lo =
+		iscsi->hq_info.pgtbl_map & 0xffffffff;
+	ictx->cstorm_st_context.hq_pbl_base.hi =
+		(u64) iscsi->hq_info.pgtbl_map >> 32;
+	ictx->cstorm_st_context.hq_curr_pbe.lo = iscsi->hq_info.pgtbl[0];
+	ictx->cstorm_st_context.hq_curr_pbe.hi = iscsi->hq_info.pgtbl[1];
+	ictx->cstorm_st_context.task_pbl_base.lo =
+		iscsi->task_array_info.pgtbl_map & 0xffffffff;
+	ictx->cstorm_st_context.task_pbl_base.hi =
+		(u64) iscsi->task_array_info.pgtbl_map >> 32;
+	/* CSTORM and USTORM initialization is different, CSTORM requires
+	 * CQ DB base & not PTE addr */
+	ictx->cstorm_st_context.cq_db_base.lo =
+		req1->cq_page_table_addr_lo & PAGE_MASK;
+	ictx->cstorm_st_context.cq_db_base.hi = req1->cq_page_table_addr_hi;
+	ictx->cstorm_st_context.iscsi_conn_id = req1->iscsi_conn_id;
+	ictx->cstorm_st_context.cq_proc_en_bit_map = (1 << cp->num_cqs) - 1;
+	for (i = 0; i < cp->num_cqs; i++) {
+		ictx->cstorm_st_context.cq_c_prod_sqn_arr.sqn[i] =
+			ISCSI_INITIAL_SN;
+		ictx->cstorm_st_context.cq_c_sqn_2_notify_arr.sqn[i] =
+			ISCSI_INITIAL_SN;
+	}
+
+	ictx->xstorm_ag_context.cdu_reserved =
+		CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_XCM_AG,
+				       ISCSI_CONNECTION_TYPE);
+	ictx->ustorm_ag_context.cdu_usage =
+		CDU_RSRVD_VALUE_TYPE_A(hw_cid, CDU_REGION_NUMBER_UCM_AG,
+				       ISCSI_CONNECTION_TYPE);
+	return 0;
+
+}
+
+static int cnic_bnx2x_iscsi_ofld1(struct cnic_dev *dev, struct kwqe *wqes[],
+				   u32 num, int *work)
+{
+	struct iscsi_kwqe_conn_offload1 *req1;
+	struct iscsi_kwqe_conn_offload2 *req2;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+	u32 l5_cid;
+	int ret;
+
+	if (num < 2) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	req1 = (struct iscsi_kwqe_conn_offload1 *) wqes[0];
+	req2 = (struct iscsi_kwqe_conn_offload2 *) wqes[1];
+	if ((num - 2) < req2->num_additional_wqes) {
+		*work = num;
+		return -EINVAL;
+	}
+	*work = 2 + req2->num_additional_wqes;;
+
+	l5_cid = req1->iscsi_conn_id;
+	if (l5_cid >= MAX_ISCSI_TBL_SZ)
+		return -EINVAL;
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = ISCSI_KCQE_OPCODE_OFFLOAD_CONN;
+	kcqe.iscsi_conn_id = l5_cid;
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE;
+
+	if (atomic_inc_return(&cp->iscsi_conn) > dev->max_iscsi_conn) {
+		atomic_dec(&cp->iscsi_conn);
+		ret = 0;
+		goto done;
+	}
+	ret = cnic_alloc_bnx2x_conn_resc(dev, l5_cid);
+	if (ret) {
+		atomic_dec(&cp->iscsi_conn);
+		ret = 0;
+		goto done;
+	}
+	ret = cnic_setup_bnx2x_ctx(dev, wqes, num);
+	if (ret < 0) {
+		cnic_free_bnx2x_conn_resc(dev, l5_cid);
+		atomic_dec(&cp->iscsi_conn);
+		goto done;
+	}
+
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+	kcqe.iscsi_conn_context_id = BNX2X_HW_CID(cp->ctx_tbl[l5_cid].cid,
+						  cp->func);
+
+done:
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+	return ret;
+}
+
+
+static int cnic_bnx2x_iscsi_update(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_update *req =
+		(struct iscsi_kwqe_conn_update *) kwqe;
+	void *data;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid, cid = BNX2X_SW_CID(req->context_id);
+	int ret;
+
+	if (cnic_get_l5_cid(cp, cid, &l5_cid) != 0)
+		return -EINVAL;
+
+	data = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!data)
+		return -ENOMEM;
+
+	memcpy(data, kwqe, sizeof(struct kwqe));
+
+	ret = cnic_submit_kwqe_16(dev, ISCSI_RAMROD_CMD_ID_UPDATE_CONN,
+			req->context_id, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_iscsi_destroy(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct iscsi_kwqe_conn_destroy *req =
+		(struct iscsi_kwqe_conn_destroy *) kwqe;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid = req->reserved0;
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	int ret = 0;
+	struct iscsi_kcqe kcqe;
+	struct kcqe *cqes[1];
+
+	if (!(ctx->ctx_flags & CTX_FL_OFFLD_START))
+		goto skip_cfc_delete;
+
+	while (!time_after(jiffies, ctx->timestamp + (2 * HZ)))
+		msleep(250);
+
+	init_waitqueue_head(&ctx->waitq);
+	ctx->wait_cond = 0;
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_CFC_DEL,
+				  req->context_id,
+				  ETH_CONNECTION_TYPE |
+				  (1 << SPE_HDR_COMMON_RAMROD_SHIFT),
+				  &l5_data);
+	if (ret == 0)
+		wait_event(ctx->waitq, ctx->wait_cond);
+
+skip_cfc_delete:
+	cnic_free_bnx2x_conn_resc(dev, l5_cid);
+
+	atomic_dec(&cp->iscsi_conn);
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.op_code = ISCSI_KCQE_OPCODE_DESTROY_CONN;
+	kcqe.iscsi_conn_id = l5_cid;
+	kcqe.completion_status = ISCSI_KCQE_COMPLETION_STATUS_SUCCESS;
+	kcqe.iscsi_conn_context_id = req->context_id;
+
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_ISCSI, cqes, 1);
+
+	return ret;
+}
+
+static void cnic_init_storm_conn_bufs(struct cnic_dev *dev,
+				      struct l4_kwq_connect_req1 *kwqe1,
+				      struct l4_kwq_connect_req3 *kwqe3,
+				      struct l5cm_active_conn_buffer *conn_buf)
+{
+	struct l5cm_conn_addr_params *conn_addr = &conn_buf->conn_addr_buf;
+	struct l5cm_xstorm_conn_buffer *xstorm_buf =
+		&conn_buf->xstorm_conn_buffer;
+	struct l5cm_tstorm_conn_buffer *tstorm_buf =
+		&conn_buf->tstorm_conn_buffer;
+	struct regpair context_addr;
+	u32 cid = BNX2X_SW_CID(kwqe1->cid);
+	struct in6_addr src_ip, dst_ip;
+	int i;
+	u32 *addrp;
+
+	addrp = (u32 *) &conn_addr->local_ip_addr;
+	for (i = 0; i < 4; i++, addrp++)
+		src_ip.in6_u.u6_addr32[i] = cpu_to_be32(*addrp);
+
+	addrp = (u32 *) &conn_addr->remote_ip_addr;
+	for (i = 0; i < 4; i++, addrp++)
+		dst_ip.in6_u.u6_addr32[i] = cpu_to_be32(*addrp);
+
+	cnic_get_bnx2x_ctx(dev, cid, 0, &context_addr);
+
+	xstorm_buf->context_addr.hi = context_addr.hi;
+	xstorm_buf->context_addr.lo = context_addr.lo;
+	xstorm_buf->mss = 0xffff;
+	xstorm_buf->rcv_buf = kwqe3->rcv_buf;
+	if (kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_NAGLE_ENABLE)
+		xstorm_buf->params |= L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE;
+	xstorm_buf->pseudo_header_checksum =
+		swab16(~csum_ipv6_magic(&src_ip, &dst_ip, 0, IPPROTO_TCP, 0));
+
+	if (!(kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_NO_DELAY_ACK))
+		tstorm_buf->params |=
+			L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE;
+	if (kwqe3->ka_timeout) {
+		tstorm_buf->ka_enable = 1;
+		tstorm_buf->ka_timeout = kwqe3->ka_timeout;
+		tstorm_buf->ka_interval = kwqe3->ka_interval;
+		tstorm_buf->ka_max_probe_count = kwqe3->ka_max_probe_count;
+	}
+	tstorm_buf->rcv_buf = kwqe3->rcv_buf;
+	tstorm_buf->snd_buf = kwqe3->snd_buf;
+	tstorm_buf->max_rt_time = 0xffffffff;
+}
+
+static void cnic_init_bnx2x_mac(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp);
+	u8 *mac = dev->mac_addr;
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR0_OFFSET(func), mac[0]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR1_OFFSET(func), mac[1]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR2_OFFSET(func), mac[2]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR3_OFFSET(func), mac[3]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR4_OFFSET(func), mac[4]);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_LOCAL_MAC_ADDR5_OFFSET(func), mac[5]);
+
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(func), mac[5]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_LSB_LOCAL_MAC_ADDR_OFFSET(func) + 1,
+		 mac[4]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func), mac[3]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 1,
+		 mac[2]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 2,
+		 mac[1]);
+	CNIC_WR8(dev, BAR_TSTRORM_INTMEM +
+		 TSTORM_ISCSI_TCP_VARS_MSB_LOCAL_MAC_ADDR_OFFSET(func) + 3,
+		 mac[0]);
+}
+
+static void cnic_bnx2x_set_tcp_timestamp(struct cnic_dev *dev, int tcp_ts)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 xstorm_flags = XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN;
+	u16 tstorm_flags = 0;
+
+	if (tcp_ts) {
+		xstorm_flags |= XSTORM_L5CM_TCP_FLAGS_TS_ENABLED;
+		tstorm_flags |= TSTORM_L5CM_TCP_FLAGS_TS_ENABLED;
+	}
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(cp->func), xstorm_flags);
+
+	CNIC_WR16(dev, BAR_TSTRORM_INTMEM +
+		  TSTORM_ISCSI_TCP_VARS_FLAGS_OFFSET(cp->func), tstorm_flags);
+}
+
+static int cnic_bnx2x_connect(struct cnic_dev *dev, struct kwqe *wqes[],
+			      u32 num, int *work)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct l4_kwq_connect_req1 *kwqe1 =
+		(struct l4_kwq_connect_req1 *) wqes[0];
+	struct l4_kwq_connect_req3 *kwqe3;
+	struct l5cm_active_conn_buffer *conn_buf;
+	struct l5cm_conn_addr_params *conn_addr;
+	union l5cm_specific_data l5_data;
+	u32 l5_cid = kwqe1->pg_cid;
+	struct cnic_sock *csk = &cp->csk_tbl[l5_cid];
+	struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+	int ret;
+
+	if (num < 2) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	if (kwqe1->conn_flags & L4_KWQ_CONNECT_REQ1_IP_V6)
+		*work = 3;
+	else
+		*work = 2;
+
+	if (num < *work) {
+		*work = num;
+		return -EINVAL;
+	}
+
+	if (sizeof(*conn_buf) > CNIC_KWQ16_DATA_SIZE) {
+		printk(KERN_ERR PFX "%s: conn_buf size too big\n",
+			       dev->netdev->name);
+		return -ENOMEM;
+	}
+	conn_buf = cnic_get_kwqe_16_data(cp, l5_cid, &l5_data);
+	if (!conn_buf)
+		return -ENOMEM;
+
+	memset(conn_buf, 0, sizeof(*conn_buf));
+
+	conn_addr = &conn_buf->conn_addr_buf;
+	conn_addr->remote_addr_0 = csk->ha[0];
+	conn_addr->remote_addr_1 = csk->ha[1];
+	conn_addr->remote_addr_2 = csk->ha[2];
+	conn_addr->remote_addr_3 = csk->ha[3];
+	conn_addr->remote_addr_4 = csk->ha[4];
+	conn_addr->remote_addr_5 = csk->ha[5];
+
+	if (kwqe1->conn_flags & L4_KWQ_CONNECT_REQ1_IP_V6) {
+		struct l4_kwq_connect_req2 *kwqe2 =
+			(struct l4_kwq_connect_req2 *) wqes[1];
+
+		conn_addr->local_ip_addr.ip_addr_hi_hi = kwqe2->src_ip_v6_4;
+		conn_addr->local_ip_addr.ip_addr_hi_lo = kwqe2->src_ip_v6_3;
+		conn_addr->local_ip_addr.ip_addr_lo_hi = kwqe2->src_ip_v6_2;
+
+		conn_addr->remote_ip_addr.ip_addr_hi_hi = kwqe2->dst_ip_v6_4;
+		conn_addr->remote_ip_addr.ip_addr_hi_lo = kwqe2->dst_ip_v6_3;
+		conn_addr->remote_ip_addr.ip_addr_lo_hi = kwqe2->dst_ip_v6_2;
+		conn_addr->params |= L5CM_CONN_ADDR_PARAMS_IP_VERSION;
+	}
+	kwqe3 = (struct l4_kwq_connect_req3 *) wqes[*work - 1];
+
+	conn_addr->local_ip_addr.ip_addr_lo_lo = kwqe1->src_ip;
+	conn_addr->remote_ip_addr.ip_addr_lo_lo = kwqe1->dst_ip;
+	conn_addr->local_tcp_port = kwqe1->src_port;
+	conn_addr->remote_tcp_port = kwqe1->dst_port;
+
+	conn_addr->pmtu = kwqe3->pmtu;
+	cnic_init_storm_conn_bufs(dev, kwqe1, kwqe3, conn_buf);
+
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_LOCAL_VLAN_OFFSET(cp->func), csk->vlan_id);
+
+	cnic_bnx2x_set_tcp_timestamp(dev,
+		kwqe1->tcp_flags & L4_KWQ_CONNECT_REQ1_TIME_STAMP);
+
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_TCP_CONNECT,
+			kwqe1->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	if (!ret)
+		ctx->ctx_flags |= CTX_FL_OFFLD_START;
+
+	return ret;
+}
+
+static int cnic_bnx2x_close(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_close_req *req = (struct l4_kwq_close_req *) kwqe;
+	union l5cm_specific_data l5_data;
+	int ret;
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_CLOSE,
+			req->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+
+static int cnic_bnx2x_reset(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_reset_req *req = (struct l4_kwq_reset_req *) kwqe;
+	union l5cm_specific_data l5_data;
+	int ret;
+
+	memset(&l5_data, 0, sizeof(l5_data));
+	ret = cnic_submit_kwqe_16(dev, L5CM_RAMROD_CMD_ID_ABORT,
+			req->cid, ISCSI_CONNECTION_TYPE, &l5_data);
+	return ret;
+}
+static int cnic_bnx2x_offload_pg(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_offload_pg *req = (struct l4_kwq_offload_pg *) kwqe;
+	struct l4_kcq kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.pg_host_opaque = req->host_opaque;
+	kcqe.pg_cid = req->host_opaque;
+	kcqe.op_code = L4_KCQE_OPCODE_VALUE_OFFLOAD_PG;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_L4, cqes, 1);
+	return 0;
+}
+
+static int cnic_bnx2x_update_pg(struct cnic_dev *dev, struct kwqe *kwqe)
+{
+	struct l4_kwq_update_pg *req = (struct l4_kwq_update_pg *) kwqe;
+	struct l4_kcq kcqe;
+	struct kcqe *cqes[1];
+
+	memset(&kcqe, 0, sizeof(kcqe));
+	kcqe.pg_host_opaque = req->pg_host_opaque;
+	kcqe.pg_cid = req->pg_cid;
+	kcqe.op_code = L4_KCQE_OPCODE_VALUE_UPDATE_PG;
+	cqes[0] = (struct kcqe *) &kcqe;
+	cnic_reply_bnx2x_kcqes(dev, CNIC_ULP_L4, cqes, 1);
+	return 0;
+}
+
+static int cnic_submit_bnx2x_kwqes(struct cnic_dev *dev, struct kwqe *wqes[],
+				   u32 num_wqes)
+{
+	int i, work, ret;
+	u32 opcode;
+	struct kwqe *kwqe;
+
+	if (!test_bit(CNIC_F_CNIC_UP, &dev->flags))
+		return -EAGAIN;		/* bnx2 is down */
+
+	for (i = 0; i < num_wqes; ) {
+		kwqe = wqes[i];
+		opcode = KWQE_OPCODE(kwqe->kwqe_op_flag);
+		work = 1;
+
+		switch (opcode) {
+		case ISCSI_KWQE_OPCODE_INIT1:
+			ret = cnic_bnx2x_iscsi_init1(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_INIT2:
+			ret = cnic_bnx2x_iscsi_init2(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_OFFLOAD_CONN1:
+			ret = cnic_bnx2x_iscsi_ofld1(dev, &wqes[i],
+						     num_wqes - i, &work);
+			break;
+		case ISCSI_KWQE_OPCODE_UPDATE_CONN:
+			ret = cnic_bnx2x_iscsi_update(dev, kwqe);
+			break;
+		case ISCSI_KWQE_OPCODE_DESTROY_CONN:
+			ret = cnic_bnx2x_iscsi_destroy(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_CONNECT1:
+			ret = cnic_bnx2x_connect(dev, &wqes[i], num_wqes - i,
+						 &work);
+			break;
+		case L4_KWQE_OPCODE_VALUE_CLOSE:
+			ret = cnic_bnx2x_close(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_RESET:
+			ret = cnic_bnx2x_reset(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_OFFLOAD_PG:
+			ret = cnic_bnx2x_offload_pg(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_UPDATE_PG:
+			ret = cnic_bnx2x_update_pg(dev, kwqe);
+			break;
+		case L4_KWQE_OPCODE_VALUE_UPLOAD_PG:
+			ret = 0;
+			break;
+		default:
+			ret = 0;
+			printk(KERN_ERR PFX "%s: Unknown type of KWQE(0x%x)\n",
+			       dev->netdev->name, opcode);
+			break;
+		}
+		if (ret < 0)
+			printk(KERN_ERR PFX "%s: KWQE(0x%x) failed\n",
+			       dev->netdev->name, opcode);
+		i += work;
+	}
+	return 0;
+}
+
 static void service_kcqes(struct cnic_dev *dev, int num_cqes)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -987,6 +2096,22 @@
 	return idx;
 }
 
+static u16 cnic_bnx2x_next_idx(u16 idx)
+{
+	idx++;
+	if ((idx & MAX_KCQE_CNT) == MAX_KCQE_CNT)
+		idx++;
+
+	return idx;
+}
+
+static u16 cnic_bnx2x_hw_idx(u16 idx)
+{
+	if ((idx & MAX_KCQE_CNT) == MAX_KCQE_CNT)
+		idx++;
+	return idx;
+}
+
 static int cnic_get_kcqes(struct cnic_dev *dev, u16 hw_prod, u16 *sw_prod)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -1012,7 +2137,7 @@
 	return last_cnt;
 }
 
-static void cnic_chk_bnx2_pkt_rings(struct cnic_local *cp)
+static void cnic_chk_pkt_rings(struct cnic_local *cp)
 {
 	u16 rx_cons = *cp->rx_cons_ptr;
 	u16 tx_cons = *cp->tx_cons_ptr;
@@ -1020,6 +2145,7 @@
 	if (cp->tx_cons != tx_cons || cp->rx_cons != rx_cons) {
 		cp->tx_cons = tx_cons;
 		cp->rx_cons = rx_cons;
+
 		uio_event_notify(cp->cnic_uinfo);
 	}
 }
@@ -1062,7 +2188,7 @@
 
 	cp->kcq_prod_idx = sw_prod;
 
-	cnic_chk_bnx2_pkt_rings(cp);
+	cnic_chk_pkt_rings(cp);
 	return status_idx;
 }
 
@@ -1100,7 +2226,7 @@
 	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod);
 	cp->kcq_prod_idx = sw_prod;
 
-	cnic_chk_bnx2_pkt_rings(cp);
+	cnic_chk_pkt_rings(cp);
 
 	cp->last_status_idx = status_idx;
 	CNIC_WR(dev, BNX2_PCICFG_INT_ACK_CMD, cp->int_num |
@@ -1125,6 +2251,91 @@
 	return IRQ_HANDLED;
 }
 
+static inline void cnic_ack_bnx2x_int(struct cnic_dev *dev, u8 id, u8 storm,
+				      u16 index, u8 op, u8 update)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 hc_addr = (HC_REG_COMMAND_REG + CNIC_PORT(cp) * 32 +
+		       COMMAND_REG_INT_ACK);
+	struct igu_ack_register igu_ack;
+
+	igu_ack.status_block_index = index;
+	igu_ack.sb_id_and_flags =
+			((id << IGU_ACK_REGISTER_STATUS_BLOCK_ID_SHIFT) |
+			 (storm << IGU_ACK_REGISTER_STORM_ID_SHIFT) |
+			 (update << IGU_ACK_REGISTER_UPDATE_INDEX_SHIFT) |
+			 (op << IGU_ACK_REGISTER_INTERRUPT_MODE_SHIFT));
+
+	CNIC_WR(dev, hc_addr, (*(u32 *)&igu_ack));
+}
+
+static void cnic_ack_bnx2x_msix(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+
+	cnic_ack_bnx2x_int(dev, cp->status_blk_num, CSTORM_ID, 0,
+			   IGU_INT_DISABLE, 0);
+}
+
+static void cnic_service_bnx2x_bh(unsigned long data)
+{
+	struct cnic_dev *dev = (struct cnic_dev *) data;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 hw_prod, sw_prod;
+	struct cstorm_status_block_c *sblk =
+		&cp->bnx2x_status_blk->c_status_block;
+	u32 status_idx = sblk->status_block_index;
+	int kcqe_cnt;
+
+	if (unlikely(!test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		return;
+
+	hw_prod = sblk->index_values[HC_INDEX_C_ISCSI_EQ_CONS];
+	hw_prod = cp->hw_idx(hw_prod);
+	sw_prod = cp->kcq_prod_idx;
+	while (sw_prod != hw_prod) {
+		kcqe_cnt = cnic_get_kcqes(dev, hw_prod, &sw_prod);
+		if (kcqe_cnt == 0)
+			goto done;
+
+		service_kcqes(dev, kcqe_cnt);
+
+		/* Tell compiler that sblk fields can change. */
+		barrier();
+		if (status_idx == sblk->status_block_index)
+			break;
+
+		status_idx = sblk->status_block_index;
+		hw_prod = sblk->index_values[HC_INDEX_C_ISCSI_EQ_CONS];
+		hw_prod = cp->hw_idx(hw_prod);
+	}
+
+done:
+	CNIC_WR16(dev, cp->kcq_io_addr, sw_prod + MAX_KCQ_IDX);
+	cnic_ack_bnx2x_int(dev, cp->status_blk_num, CSTORM_ID,
+			   status_idx, IGU_INT_ENABLE, 1);
+
+	cp->kcq_prod_idx = sw_prod;
+	return;
+}
+
+static int cnic_service_bnx2x(void *data, void *status_blk)
+{
+	struct cnic_dev *dev = data;
+	struct cnic_local *cp = dev->cnic_priv;
+	u16 prod = cp->kcq_prod_idx & MAX_KCQ_IDX;
+
+	prefetch(cp->status_blk);
+	prefetch(&cp->kcq[KCQ_PG(prod)][KCQ_IDX(prod)]);
+
+	if (likely(test_bit(CNIC_F_CNIC_UP, &dev->flags)))
+		tasklet_schedule(&cp->cnic_irq_task);
+
+	cnic_chk_pkt_rings(cp);
+
+	return 0;
+}
+
 static void cnic_ulp_stop(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -1197,6 +2408,19 @@
 
 		cnic_put(dev);
 		break;
+	case CNIC_CTL_COMPLETION_CMD: {
+		u32 cid = BNX2X_SW_CID(info->data.comp.cid);
+		u32 l5_cid;
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (cnic_get_l5_cid(cp, cid, &l5_cid) == 0) {
+			struct cnic_context *ctx = &cp->ctx_tbl[l5_cid];
+
+			ctx->wait_cond = 1;
+			wake_up(&ctx->waitq);
+		}
+		break;
+	}
 	default:
 		return -EINVAL;
 	}
@@ -1872,6 +3096,8 @@
 		/* fall through */
 	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
 	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+	case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE:
+	case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD:
 		cp->close_conn(csk, opcode);
 		break;
 
@@ -1957,6 +3183,76 @@
 	return 0;
 }
 
+static void cnic_close_bnx2x_conn(struct cnic_sock *csk, u32 opcode)
+{
+	struct cnic_dev *dev = csk->dev;
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_context *ctx = &cp->ctx_tbl[csk->l5_cid];
+	union l5cm_specific_data l5_data;
+	u32 cmd = 0;
+	int close_complete = 0;
+
+	switch (opcode) {
+	case L4_KCQE_OPCODE_VALUE_RESET_RECEIVED:
+	case L4_KCQE_OPCODE_VALUE_CLOSE_COMP:
+	case L4_KCQE_OPCODE_VALUE_RESET_COMP:
+		if (cnic_ready_to_close(csk, opcode))
+			cmd = L5CM_RAMROD_CMD_ID_SEARCHER_DELETE;
+		break;
+	case L5CM_RAMROD_CMD_ID_SEARCHER_DELETE:
+		cmd = L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD;
+		break;
+	case L5CM_RAMROD_CMD_ID_TERMINATE_OFFLOAD:
+		close_complete = 1;
+		break;
+	}
+	if (cmd) {
+		memset(&l5_data, 0, sizeof(l5_data));
+
+		cnic_submit_kwqe_16(dev, cmd, csk->cid, ISCSI_CONNECTION_TYPE,
+				    &l5_data);
+	} else if (close_complete) {
+		ctx->timestamp = jiffies;
+		cnic_close_conn(csk);
+		cnic_cm_upcall(cp, csk, csk->state);
+	}
+}
+
+static void cnic_cm_stop_bnx2x_hw(struct cnic_dev *dev)
+{
+}
+
+static int cnic_cm_init_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp);
+
+	cnic_init_bnx2x_mac(dev);
+	cnic_bnx2x_set_tcp_timestamp(dev, 1);
+
+	CNIC_WR16(dev, BAR_XSTRORM_INTMEM +
+		  XSTORM_ISCSI_LOCAL_VLAN_OFFSET(func), 0);
+
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_ENABLED_OFFSET(func), 1);
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_GLOBAL_DEL_ACK_COUNTER_MAX_COUNT_OFFSET(func),
+		DEF_MAX_DA_COUNT);
+
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_TTL_OFFSET(func), DEF_TTL);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_TOS_OFFSET(func), DEF_TOS);
+	CNIC_WR8(dev, BAR_XSTRORM_INTMEM +
+		 XSTORM_ISCSI_TCP_VARS_ADV_WND_SCL_OFFSET(func), 2);
+	CNIC_WR(dev, BAR_XSTRORM_INTMEM +
+		XSTORM_TCP_TX_SWS_TIMER_VAL_OFFSET(func), DEF_SWS_TIMER);
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM + TSTORM_TCP_MAX_CWND_OFFSET(func),
+		DEF_MAX_CWND);
+	return 0;
+}
+
 static int cnic_cm_open(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -2464,6 +3760,417 @@
 	return 0;
 }
 
+static void cnic_setup_bnx2x_context(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	u32 start_offset = ethdev->ctx_tbl_offset;
+	int i;
+
+	for (i = 0; i < cp->ctx_blks; i++) {
+		struct cnic_ctx *ctx = &cp->ctx_arr[i];
+		dma_addr_t map = ctx->mapping;
+
+		if (cp->ctx_align) {
+			unsigned long mask = cp->ctx_align - 1;
+
+			map = (map + mask) & ~mask;
+		}
+
+		cnic_ctx_tbl_wr(dev, start_offset + i, map);
+	}
+}
+
+static int cnic_init_bnx2x_irq(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct cnic_eth_dev *ethdev = cp->ethdev;
+	int err = 0;
+
+	tasklet_init(&cp->cnic_irq_task, &cnic_service_bnx2x_bh,
+		     (unsigned long) dev);
+	if (ethdev->drv_state & CNIC_DRV_STATE_USING_MSIX) {
+		err = request_irq(ethdev->irq_arr[0].vector, cnic_irq, 0,
+				  "cnic", dev);
+		if (err)
+			tasklet_disable(&cp->cnic_irq_task);
+	}
+	return err;
+}
+
+static void cnic_enable_bnx2x_int(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 sb_id = cp->status_blk_num;
+	int port = CNIC_PORT(cp);
+
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		 CSTORM_SB_HC_TIMEOUT_C_OFFSET(port, sb_id,
+					       HC_INDEX_C_ISCSI_EQ_CONS),
+		 64 / 12);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_SB_HC_DISABLE_C_OFFSET(port, sb_id,
+						HC_INDEX_C_ISCSI_EQ_CONS), 0);
+}
+
+static void cnic_disable_bnx2x_int_sync(struct cnic_dev *dev)
+{
+}
+
+static void cnic_init_bnx2x_tx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	union eth_tx_bd_types *txbd = (union eth_tx_bd_types *) cp->l2_ring;
+	struct eth_context *context;
+	struct regpair context_addr;
+	dma_addr_t buf_map;
+	int func = CNIC_FUNC(cp);
+	int port = CNIC_PORT(cp);
+	int i;
+	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 val;
+
+	memset(txbd, 0, BCM_PAGE_SIZE);
+
+	buf_map = cp->l2_buf_map;
+	for (i = 0; i < MAX_TX_DESC_CNT; i += 3, txbd += 3) {
+		struct eth_tx_start_bd *start_bd = &txbd->start_bd;
+		struct eth_tx_bd *reg_bd = &((txbd + 2)->reg_bd);
+
+		start_bd->addr_hi = cpu_to_le32((u64) buf_map >> 32);
+		start_bd->addr_lo = cpu_to_le32(buf_map & 0xffffffff);
+		reg_bd->addr_hi = start_bd->addr_hi;
+		reg_bd->addr_lo = start_bd->addr_lo + 0x10;
+		start_bd->nbytes = cpu_to_le16(0x10);
+		start_bd->nbd = cpu_to_le16(3);
+		start_bd->bd_flags.as_bitfield = ETH_TX_BD_FLAGS_START_BD;
+		start_bd->general_data = (UNICAST_ADDRESS <<
+			ETH_TX_START_BD_ETH_ADDR_TYPE_SHIFT);
+		start_bd->general_data |= (1 << ETH_TX_START_BD_HDR_NBDS_SHIFT);
+
+	}
+	context = cnic_get_bnx2x_ctx(dev, BNX2X_ISCSI_L2_CID, 1, &context_addr);
+
+	val = (u64) cp->l2_ring_map >> 32;
+	txbd->next_bd.addr_hi = cpu_to_le32(val);
+
+	context->xstorm_st_context.tx_bd_page_base_hi = val;
+
+	val = (u64) cp->l2_ring_map & 0xffffffff;
+	txbd->next_bd.addr_lo = cpu_to_le32(val);
+
+	context->xstorm_st_context.tx_bd_page_base_lo = val;
+
+	context->cstorm_st_context.sb_index_number =
+		HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS;
+	context->cstorm_st_context.status_block_id = BNX2X_DEF_SB_ID;
+
+	context->xstorm_st_context.statistics_data = (cli |
+				XSTORM_ETH_ST_CONTEXT_STATISTICS_ENABLE);
+
+	context->xstorm_ag_context.cdu_reserved =
+		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
+					CDU_REGION_NUMBER_XCM_AG,
+					ETH_CONNECTION_TYPE);
+
+	/* reset xstorm per client statistics */
+	val = BAR_XSTRORM_INTMEM +
+	      XSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct xstorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	cp->tx_cons_ptr =
+		&cp->bnx2x_def_status_blk->c_def_status_block.index_values[
+			HC_INDEX_DEF_C_ETH_ISCSI_CQ_CONS];
+}
+
+static void cnic_init_bnx2x_rx_ring(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	struct eth_rx_bd *rxbd = (struct eth_rx_bd *) (cp->l2_ring +
+				BCM_PAGE_SIZE);
+	struct eth_rx_cqe_next_page *rxcqe = (struct eth_rx_cqe_next_page *)
+				(cp->l2_ring + (2 * BCM_PAGE_SIZE));
+	struct eth_context *context;
+	struct regpair context_addr;
+	int i;
+	int port = CNIC_PORT(cp);
+	int func = CNIC_FUNC(cp);
+	int cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+	u32 val;
+	struct tstorm_eth_client_config tstorm_client = {0};
+
+	for (i = 0; i < BNX2X_MAX_RX_DESC_CNT; i++, rxbd++) {
+		dma_addr_t buf_map;
+		int n = (i % cp->l2_rx_ring_size) + 1;
+
+		buf_map = cp->l2_buf_map + (n * cp->l2_single_buf_size);
+		rxbd->addr_hi = cpu_to_le32((u64) buf_map >> 32);
+		rxbd->addr_lo = cpu_to_le32(buf_map & 0xffffffff);
+	}
+	context = cnic_get_bnx2x_ctx(dev, BNX2X_ISCSI_L2_CID, 0, &context_addr);
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) >> 32;
+	rxbd->addr_hi = cpu_to_le32(val);
+
+	context->ustorm_st_context.common.bd_page_base_hi = val;
+
+	val = (u64) (cp->l2_ring_map + BCM_PAGE_SIZE) & 0xffffffff;
+	rxbd->addr_lo = cpu_to_le32(val);
+
+	context->ustorm_st_context.common.bd_page_base_lo = val;
+
+	context->ustorm_st_context.common.sb_index_numbers =
+						BNX2X_ISCSI_RX_SB_INDEX_NUM;
+	context->ustorm_st_context.common.clientId = cli;
+	context->ustorm_st_context.common.status_block_id = BNX2X_DEF_SB_ID;
+	context->ustorm_st_context.common.flags =
+		USTORM_ETH_ST_CONTEXT_CONFIG_ENABLE_STATISTICS;
+	context->ustorm_st_context.common.statistics_counter_id = cli;
+	context->ustorm_st_context.common.mc_alignment_log_size = 0;
+	context->ustorm_st_context.common.bd_buff_size =
+						cp->l2_single_buf_size;
+
+	context->ustorm_ag_context.cdu_usage =
+		CDU_RSRVD_VALUE_TYPE_A(BNX2X_HW_CID(BNX2X_ISCSI_L2_CID, func),
+					CDU_REGION_NUMBER_UCM_AG,
+					ETH_CONNECTION_TYPE);
+
+	rxcqe += BNX2X_MAX_RCQ_DESC_CNT;
+	val = (u64) (cp->l2_ring_map + (2 * BCM_PAGE_SIZE)) >> 32;
+	rxcqe->addr_hi = cpu_to_le32(val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_BASE_OFFSET(port, cli) + 4, val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_NEXT_OFFSET(port, cli) + 4, val);
+
+	val = (u64) (cp->l2_ring_map + (2 * BCM_PAGE_SIZE)) & 0xffffffff;
+	rxcqe->addr_lo = cpu_to_le32(val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_BASE_OFFSET(port, cli), val);
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_CQE_PAGE_NEXT_OFFSET(port, cli), val);
+
+	/* client tstorm info */
+	tstorm_client.mtu = cp->l2_single_buf_size - 14;
+	tstorm_client.config_flags =
+			(TSTORM_ETH_CLIENT_CONFIG_E1HOV_REM_ENABLE |
+			TSTORM_ETH_CLIENT_CONFIG_STATSITICS_ENABLE);
+	tstorm_client.statistics_counter_id = cli;
+
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli),
+		   ((u32 *)&tstorm_client)[0]);
+	CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+		   TSTORM_CLIENT_CONFIG_OFFSET(port, cli) + 4,
+		   ((u32 *)&tstorm_client)[1]);
+
+	/* reset tstorm per client statistics */
+	val = BAR_TSTRORM_INTMEM +
+	      TSTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct tstorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	/* reset ustorm per client statistics */
+	val = BAR_USTRORM_INTMEM +
+	      USTORM_PER_COUNTER_ID_STATS_OFFSET(port, cli);
+	for (i = 0; i < sizeof(struct ustorm_per_client_stats) / 4; i++)
+		CNIC_WR(dev, val + i * 4, 0);
+
+	cp->rx_cons_ptr =
+		&cp->bnx2x_def_status_blk->u_def_status_block.index_values[
+			HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS];
+}
+
+static void cnic_get_bnx2x_iscsi_info(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u32 base, addr, val;
+	int port = CNIC_PORT(cp);
+
+	dev->max_iscsi_conn = 0;
+	base = CNIC_RD(dev, MISC_REG_SHARED_MEM_ADDR);
+	if (base < 0xa0000 || base >= 0xc0000)
+		return;
+
+	val = BNX2X_SHMEM_ADDR(base,
+		dev_info.port_hw_config[port].iscsi_mac_upper);
+
+	dev->mac_addr[0] = (u8) (val >> 8);
+	dev->mac_addr[1] = (u8) val;
+
+	val = BNX2X_SHMEM_ADDR(base,
+		dev_info.port_hw_config[port].iscsi_mac_lower);
+
+	dev->mac_addr[2] = (u8) (val >> 24);
+	dev->mac_addr[3] = (u8) (val >> 16);
+	dev->mac_addr[4] = (u8) (val >> 8);
+	dev->mac_addr[5] = (u8) val;
+
+	addr = BNX2X_SHMEM_ADDR(base, validity_map[port]);
+	val = CNIC_RD(dev, addr);
+
+	if (!(val & SHR_MEM_VALIDITY_LIC_NO_KEY_IN_EFFECT)) {
+		u16 val16;
+
+		addr = BNX2X_SHMEM_ADDR(base,
+				drv_lic_key[port].max_iscsi_init_conn);
+		val16 = CNIC_RD16(dev, addr);
+
+		if (val16)
+			val16 ^= 0x1e1e;
+		dev->max_iscsi_conn = val16;
+	}
+	if (BNX2X_CHIP_IS_E1H(cp->chip_id)) {
+		int func = CNIC_FUNC(cp);
+
+		addr = BNX2X_SHMEM_ADDR(base,
+				mf_cfg.func_mf_config[func].e1hov_tag);
+		val = CNIC_RD(dev, addr);
+		val &= FUNC_MF_CFG_E1HOV_TAG_MASK;
+		if (val != FUNC_MF_CFG_E1HOV_TAG_DEFAULT) {
+			addr = BNX2X_SHMEM_ADDR(base,
+				mf_cfg.func_mf_config[func].config);
+			val = CNIC_RD(dev, addr);
+			val &= FUNC_MF_CFG_PROTOCOL_MASK;
+			if (val != FUNC_MF_CFG_PROTOCOL_ISCSI)
+				dev->max_iscsi_conn = 0;
+		}
+	}
+}
+
+static int cnic_start_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	int func = CNIC_FUNC(cp), ret, i;
+	int port = CNIC_PORT(cp);
+	u16 eq_idx;
+	u8 sb_id = cp->status_blk_num;
+
+	ret = cnic_init_id_tbl(&cp->cid_tbl, MAX_ISCSI_TBL_SZ,
+			       BNX2X_ISCSI_START_CID);
+
+	if (ret)
+		return -ENOMEM;
+
+	cp->kcq_io_addr = BAR_CSTRORM_INTMEM +
+			  CSTORM_ISCSI_EQ_PROD_OFFSET(func, 0);
+	cp->kcq_prod_idx = 0;
+
+	cnic_get_bnx2x_iscsi_info(dev);
+
+	/* Only 1 EQ */
+	CNIC_WR16(dev, cp->kcq_io_addr, MAX_KCQ_IDX);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_CONS_OFFSET(func, 0), 0);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(func, 0),
+		cp->kcq_info.pg_map_arr[1] & 0xffffffff);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_OFFSET(func, 0) + 4,
+		(u64) cp->kcq_info.pg_map_arr[1] >> 32);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(func, 0),
+		cp->kcq_info.pg_map_arr[0] & 0xffffffff);
+	CNIC_WR(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_EQE_ADDR_OFFSET(func, 0) + 4,
+		(u64) cp->kcq_info.pg_map_arr[0] >> 32);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_NEXT_PAGE_ADDR_VALID_OFFSET(func, 0), 1);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_SB_NUM_OFFSET(func, 0), cp->status_blk_num);
+	CNIC_WR8(dev, BAR_CSTRORM_INTMEM +
+		CSTORM_ISCSI_EQ_SB_INDEX_OFFSET(func, 0),
+		HC_INDEX_C_ISCSI_EQ_CONS);
+
+	for (i = 0; i < cp->conn_buf_info.num_pages; i++) {
+		CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+			TSTORM_ISCSI_CONN_BUF_PBL_OFFSET(func, i),
+			cp->conn_buf_info.pgtbl[2 * i]);
+		CNIC_WR(dev, BAR_TSTRORM_INTMEM +
+			TSTORM_ISCSI_CONN_BUF_PBL_OFFSET(func, i) + 4,
+			cp->conn_buf_info.pgtbl[(2 * i) + 1]);
+	}
+
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(func),
+		cp->gbl_buf_info.pg_map_arr[0] & 0xffffffff);
+	CNIC_WR(dev, BAR_USTRORM_INTMEM +
+		USTORM_ISCSI_GLOBAL_BUF_PHYS_ADDR_OFFSET(func) + 4,
+		(u64) cp->gbl_buf_info.pg_map_arr[0] >> 32);
+
+	cnic_setup_bnx2x_context(dev);
+
+	eq_idx = CNIC_RD16(dev, BAR_CSTRORM_INTMEM +
+			   CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id) +
+			   offsetof(struct cstorm_status_block_c,
+				    index_values[HC_INDEX_C_ISCSI_EQ_CONS]));
+	if (eq_idx != 0) {
+		printk(KERN_ERR PFX "%s: EQ cons index %x != 0\n",
+		       dev->netdev->name, eq_idx);
+		return -EBUSY;
+	}
+	ret = cnic_init_bnx2x_irq(dev);
+	if (ret)
+		return ret;
+
+	cnic_init_bnx2x_tx_ring(dev);
+	cnic_init_bnx2x_rx_ring(dev);
+
+	return 0;
+}
+
+static void cnic_init_rings(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		cnic_init_bnx2_tx_ring(dev);
+		cnic_init_bnx2_rx_ring(dev);
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+		struct cnic_eth_dev *ethdev = cp->ethdev;
+		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+		union l5cm_specific_data l5_data;
+		struct ustorm_eth_rx_producers rx_prods = {0};
+		void __iomem *doorbell;
+		int i;
+
+		rx_prods.bd_prod = 0;
+		rx_prods.cqe_prod = BNX2X_MAX_RCQ_DESC_CNT;
+		barrier();
+
+		doorbell = ethdev->io_base2 + BAR_USTRORM_INTMEM +
+			USTORM_RX_PRODS_OFFSET(CNIC_PORT(cp), cli);
+
+		for (i = 0; i < sizeof(struct ustorm_eth_rx_producers) / 4; i++)
+			writel(((u32 *) &rx_prods)[i], doorbell + i * 4);
+
+		cnic_init_bnx2x_tx_ring(dev);
+		cnic_init_bnx2x_rx_ring(dev);
+
+		l5_data.phy_address.lo = cli;
+		l5_data.phy_address.hi = 0;
+		cnic_submit_kwqe_16(dev, RAMROD_CMD_ID_ETH_CLIENT_SETUP,
+			BNX2X_ISCSI_L2_CID, ETH_CONNECTION_TYPE, &l5_data);
+		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 1);
+	}
+}
+
+static void cnic_shutdown_rings(struct cnic_dev *dev)
+{
+	if (test_bit(CNIC_F_BNX2_CLASS, &dev->flags)) {
+		cnic_shutdown_bnx2_rx_ring(dev);
+	} else if (test_bit(CNIC_F_BNX2X_CLASS, &dev->flags)) {
+		struct cnic_local *cp = dev->cnic_priv;
+		u32 cli = BNX2X_ISCSI_CL_ID(CNIC_E1HVN(cp));
+
+		cnic_ring_ctl(dev, BNX2X_ISCSI_L2_CID, cli, 0);
+	}
+}
+
 static int cnic_register_netdev(struct cnic_dev *dev)
 {
 	struct cnic_local *cp = dev->cnic_priv;
@@ -2554,6 +4261,22 @@
 	cnic_free_resc(dev);
 }
 
+
+static void cnic_stop_bnx2x_hw(struct cnic_dev *dev)
+{
+	struct cnic_local *cp = dev->cnic_priv;
+	u8 sb_id = cp->status_blk_num;
+	int port = CNIC_PORT(cp);
+
+	cnic_free_irq(dev);
+	CNIC_WR16(dev, BAR_CSTRORM_INTMEM +
+		  CSTORM_SB_HOST_STATUS_BLOCK_C_OFFSET(port, sb_id) +
+		  offsetof(struct cstorm_status_block_c,
+			   index_values[HC_INDEX_C_ISCSI_EQ_CONS]),
+		  0);
+	cnic_free_resc(dev);
+}
+
 static void cnic_stop_hw(struct cnic_dev *dev)
 {
 	if (test_bit(CNIC_F_CNIC_UP, &dev->flags)) {
@@ -2685,6 +4408,57 @@
 	return NULL;
 }
 
+static struct cnic_dev *init_bnx2x_cnic(struct net_device *dev)
+{
+	struct pci_dev *pdev;
+	struct cnic_dev *cdev;
+	struct cnic_local *cp;
+	struct cnic_eth_dev *ethdev = NULL;
+	struct cnic_eth_dev *(*probe)(struct net_device *) = NULL;
+
+	probe = symbol_get(bnx2x_cnic_probe);
+	if (probe) {
+		ethdev = (*probe)(dev);
+		symbol_put(bnx2x_cnic_probe);
+	}
+	if (!ethdev)
+		return NULL;
+
+	pdev = ethdev->pdev;
+	if (!pdev)
+		return NULL;
+
+	dev_hold(dev);
+	cdev = cnic_alloc_dev(dev, pdev);
+	if (cdev == NULL) {
+		dev_put(dev);
+		return NULL;
+	}
+
+	set_bit(CNIC_F_BNX2X_CLASS, &cdev->flags);
+	cdev->submit_kwqes = cnic_submit_bnx2x_kwqes;
+
+	cp = cdev->cnic_priv;
+	cp->ethdev = ethdev;
+	cdev->pcidev = pdev;
+
+	cp->cnic_ops = &cnic_bnx2x_ops;
+	cp->start_hw = cnic_start_bnx2x_hw;
+	cp->stop_hw = cnic_stop_bnx2x_hw;
+	cp->setup_pgtbl = cnic_setup_page_tbl_le;
+	cp->alloc_resc = cnic_alloc_bnx2x_resc;
+	cp->free_resc = cnic_free_resc;
+	cp->start_cm = cnic_cm_init_bnx2x_hw;
+	cp->stop_cm = cnic_cm_stop_bnx2x_hw;
+	cp->enable_int = cnic_enable_bnx2x_int;
+	cp->disable_int_sync = cnic_disable_bnx2x_int_sync;
+	cp->ack_int = cnic_ack_bnx2x_msix;
+	cp->close_conn = cnic_close_bnx2x_conn;
+	cp->next_idx = cnic_bnx2x_next_idx;
+	cp->hw_idx = cnic_bnx2x_hw_idx;
+	return cdev;
+}
+
 static struct cnic_dev *is_cnic_dev(struct net_device *dev)
 {
 	struct ethtool_drvinfo drvinfo;
@@ -2696,6 +4470,8 @@
 
 		if (!strcmp(drvinfo.driver, "bnx2"))
 			cdev = init_bnx2_cnic(dev);
+		if (!strcmp(drvinfo.driver, "bnx2x"))
+			cdev = init_bnx2x_cnic(dev);
 		if (cdev) {
 			write_lock(&cnic_dev_lock);
 			list_add(&cdev->list, &cnic_dev_list);
diff --git a/drivers/net/cnic.h b/drivers/net/cnic.h
index a94b302..241d09a 100644
--- a/drivers/net/cnic.h
+++ b/drivers/net/cnic.h
@@ -227,6 +227,7 @@
 	void				*status_blk;
 	struct status_block_msix	*bnx2_status_blk;
 	struct host_status_block	*bnx2x_status_blk;
+	struct host_def_status_block	*bnx2x_def_status_blk;
 
 	u32				status_blk_num;
 	u32				int_num;
@@ -258,6 +259,7 @@
 	struct cnic_ctx		*ctx_arr;
 	int			ctx_blks;
 	int			ctx_blk_size;
+	unsigned long		ctx_align;
 	int			cids_per_blk;
 
 	u32			chip_id;
@@ -290,11 +292,73 @@
 	u8	reserved[8];
 };
 
+#define ISCSI_DEFAULT_MAX_OUTSTANDING_R2T 	(1)
+
 #define ISCSI_RAMROD_CMD_ID_UPDATE_CONN		(ISCSI_KCQE_OPCODE_UPDATE_CONN)
 #define ISCSI_RAMROD_CMD_ID_INIT		(ISCSI_KCQE_OPCODE_INIT)
 
 #define CDU_REGION_NUMBER_XCM_AG 2
 #define CDU_REGION_NUMBER_UCM_AG 4
 
+#define CDU_VALID_DATA(_cid, _region, _type)	\
+	(((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
+
+#define CDU_CRC8(_cid, _region, _type)	\
+	(calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
+
+#define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)	\
+	(0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
+
+#define BNX2X_CONTEXT_MEM_SIZE		1024
+#define BNX2X_FCOE_CID			16
+
+/* iSCSI client IDs are 17, 19, 21, 23 */
+#define BNX2X_ISCSI_BASE_CL_ID		17
+#define BNX2X_ISCSI_CL_ID(vn)		(BNX2X_ISCSI_BASE_CL_ID + ((vn) << 1))
+
+#define BNX2X_ISCSI_L2_CID		17
+#define BNX2X_ISCSI_START_CID		18
+#define BNX2X_ISCSI_NUM_CONNECTIONS	128
+#define BNX2X_ISCSI_TASK_CONTEXT_SIZE	128
+#define BNX2X_ISCSI_MAX_PENDING_R2TS	4
+#define BNX2X_ISCSI_R2TQE_SIZE		8
+#define BNX2X_ISCSI_HQ_BD_SIZE		64
+#define BNX2X_ISCSI_CONN_BUF_SIZE	64
+#define BNX2X_ISCSI_GLB_BUF_SIZE	64
+#define BNX2X_ISCSI_PBL_NOT_CACHED	0xff
+#define BNX2X_ISCSI_PDU_HEADER_NOT_CACHED	0xff
+#define BNX2X_HW_CID(x, func)		((x) | (((func) % PORT_MAX) << 23) | \
+					 (((func) >> 1) << 17))
+#define BNX2X_SW_CID(x)			(x & 0x1ffff)
+#define BNX2X_CHIP_NUM_57711		0x164f
+#define BNX2X_CHIP_NUM_57711E		0x1650
+#define BNX2X_CHIP_NUM(x)		(x >> 16)
+#define BNX2X_CHIP_IS_57711(x)		\
+	(BNX2X_CHIP_NUM(x) == BNX2X_CHIP_NUM_57711)
+#define BNX2X_CHIP_IS_57711E(x)		\
+	(BNX2X_CHIP_NUM(x) == BNX2X_CHIP_NUM_57711E)
+#define BNX2X_CHIP_IS_E1H(x)		\
+	(BNX2X_CHIP_IS_57711(x) || BNX2X_CHIP_IS_57711E(x))
+#define IS_E1H_OFFSET       		BNX2X_CHIP_IS_E1H(cp->chip_id)
+
+#define BNX2X_RX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
+#define BNX2X_MAX_RX_DESC_CNT		(BNX2X_RX_DESC_CNT - 2)
+#define BNX2X_RCQ_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
+#define BNX2X_MAX_RCQ_DESC_CNT		(BNX2X_RCQ_DESC_CNT - 1)
+
+#define BNX2X_DEF_SB_ID			16
+
+#define BNX2X_ISCSI_RX_SB_INDEX_NUM					\
+		((HC_INDEX_DEF_U_ETH_ISCSI_RX_CQ_CONS << \
+		  USTORM_ETH_ST_CONTEXT_CONFIG_CQE_SB_INDEX_NUMBER_SHIFT) & \
+		 USTORM_ETH_ST_CONTEXT_CONFIG_CQE_SB_INDEX_NUMBER)
+
+#define BNX2X_SHMEM_ADDR(base, field)	(base + \
+					 offsetof(struct shmem_region, field))
+
+#define CNIC_PORT(cp)			((cp)->func % PORT_MAX)
+#define CNIC_FUNC(cp)			((cp)->func)
+#define CNIC_E1HVN(cp)			((cp)->func >> 1)
+
 #endif
 
diff --git a/drivers/net/cnic_defs.h b/drivers/net/cnic_defs.h
index cee80f6..9827b27 100644
--- a/drivers/net/cnic_defs.h
+++ b/drivers/net/cnic_defs.h
@@ -51,6 +51,9 @@
 #define L4_KCQE_COMPLETION_STATUS_SUCCESS		    (0)
 #define L4_KCQE_COMPLETION_STATUS_TIMEOUT        (0x93)
 
+#define L4_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAIL (0x83)
+#define L4_KCQE_COMPLETION_STATUS_OFFLOADED_PG   (0x89)
+
 #define L4_LAYER_CODE (4)
 #define L2_LAYER_CODE (2)
 
@@ -577,4 +580,1918 @@
 	u32 reserved2[6];
 };
 
+/*
+ * bnx2x structures
+ */
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_rq_db {
+	struct regpair pbl_base;
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_r2tq_db {
+	struct regpair pbl_base;
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_cq_db {
+#if defined(__BIG_ENDIAN)
+	u16 cq_sn;
+	u16 prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 prod;
+	u16 cq_sn;
+#endif
+	struct regpair curr_pbe;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct rings_db {
+	struct ustorm_iscsi_rq_db rq;
+	struct ustorm_iscsi_r2tq_db r2tq;
+	struct ustorm_iscsi_cq_db cq[8];
+#if defined(__BIG_ENDIAN)
+	u16 rq_prod;
+	u16 r2tq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 r2tq_prod;
+	u16 rq_prod;
+#endif
+	struct regpair cq_pbl_base;
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct ustorm_iscsi_placement_db {
+	u32 sgl_base_lo;
+	u32 sgl_base_hi;
+	u32 local_sge_0_address_hi;
+	u32 local_sge_0_address_lo;
+#if defined(__BIG_ENDIAN)
+	u16 curr_sge_offset;
+	u16 local_sge_0_size;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_sge_0_size;
+	u16 curr_sge_offset;
+#endif
+	u32 local_sge_1_address_hi;
+	u32 local_sge_1_address_lo;
+#if defined(__BIG_ENDIAN)
+	u16 reserved6;
+	u16 local_sge_1_size;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_sge_1_size;
+	u16 reserved6;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 sgl_size;
+	u8 local_sge_index_2b;
+	u16 reserved7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved7;
+	u8 local_sge_index_2b;
+	u8 sgl_size;
+#endif
+	u32 rem_pdu;
+	u32 place_db_bitfield_1;
+#define USTORM_ISCSI_PLACEMENT_DB_REM_PDU_PAYLOAD (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_REM_PDU_PAYLOAD_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_CQ_ID (0xFF<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_CQ_ID_SHIFT 24
+	u32 place_db_bitfield_2;
+#define USTORM_ISCSI_PLACEMENT_DB_BYTES_2_TRUNCATE (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_BYTES_2_TRUNCATE_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_HOST_SGE_INDEX (0xFF<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_HOST_SGE_INDEX_SHIFT 24
+	u32 nal;
+#define USTORM_ISCSI_PLACEMENT_DB_REM_SGE_SIZE (0xFFFFFF<<0)
+#define USTORM_ISCSI_PLACEMENT_DB_REM_SGE_SIZE_SHIFT 0
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_PADDING_2B (0x3<<24)
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_PADDING_2B_SHIFT 24
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_DIGEST_3B (0x7<<26)
+#define USTORM_ISCSI_PLACEMENT_DB_EXP_DIGEST_3B_SHIFT 26
+#define USTORM_ISCSI_PLACEMENT_DB_NAL_LEN_3B (0x7<<29)
+#define USTORM_ISCSI_PLACEMENT_DB_NAL_LEN_3B_SHIFT 29
+};
+
+/*
+ * Ustorm iSCSI Storm Context
+ */
+struct ustorm_iscsi_st_context {
+	u32 exp_stat_sn;
+	u32 exp_data_sn;
+	struct rings_db ring;
+	struct regpair task_pbl_base;
+	struct regpair tce_phy_addr;
+	struct ustorm_iscsi_placement_db place_db;
+	u32 data_rcv_seq;
+	u32 rem_rcv_len;
+#if defined(__BIG_ENDIAN)
+	u16 hdr_itt;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u16 hdr_itt;
+#endif
+	u32 nal_bytes;
+#if defined(__BIG_ENDIAN)
+	u8 hdr_second_byte_union;
+	u8 bitfield_0;
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU (0x1<<0)
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE (0x1<<1)
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE_SHIFT 1
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1 (0x3F<<2)
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1_SHIFT 2
+	u8 task_pdu_cache_index;
+	u8 task_pbe_cache_index;
+#elif defined(__LITTLE_ENDIAN)
+	u8 task_pbe_cache_index;
+	u8 task_pdu_cache_index;
+	u8 bitfield_0;
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU (0x1<<0)
+#define USTORM_ISCSI_ST_CONTEXT_BMIDDLEOFPDU_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE (0x1<<1)
+#define USTORM_ISCSI_ST_CONTEXT_BFENCECQE_SHIFT 1
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1 (0x3F<<2)
+#define USTORM_ISCSI_ST_CONTEXT_RESERVED1_SHIFT 2
+	u8 hdr_second_byte_union;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved3;
+	u8 reserved2;
+	u8 acDecrement;
+#elif defined(__LITTLE_ENDIAN)
+	u8 acDecrement;
+	u8 reserved2;
+	u16 reserved3;
+#endif
+	u32 task_stat;
+#if defined(__BIG_ENDIAN)
+	u8 hdr_opcode;
+	u8 num_cqs;
+	u16 reserved5;
+#elif defined(__LITTLE_ENDIAN)
+	u16 reserved5;
+	u8 num_cqs;
+	u8 hdr_opcode;
+#endif
+	u32 negotiated_rx;
+#define USTORM_ISCSI_ST_CONTEXT_MAX_RECV_PDU_LENGTH (0xFFFFFF<<0)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_RECV_PDU_LENGTH_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS (0xFF<<24)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_OUTSTANDING_R2TS_SHIFT 24
+	u32 negotiated_rx_and_flags;
+#define USTORM_ISCSI_ST_CONTEXT_MAX_BURST_LENGTH (0xFFFFFF<<0)
+#define USTORM_ISCSI_ST_CONTEXT_MAX_BURST_LENGTH_SHIFT 0
+#define USTORM_ISCSI_ST_CONTEXT_B_CQE_POSTED_OR_HEADER_CACHED (0x1<<24)
+#define USTORM_ISCSI_ST_CONTEXT_B_CQE_POSTED_OR_HEADER_CACHED_SHIFT 24
+#define USTORM_ISCSI_ST_CONTEXT_B_HDR_DIGEST_EN (0x1<<25)
+#define USTORM_ISCSI_ST_CONTEXT_B_HDR_DIGEST_EN_SHIFT 25
+#define USTORM_ISCSI_ST_CONTEXT_B_DATA_DIGEST_EN (0x1<<26)
+#define USTORM_ISCSI_ST_CONTEXT_B_DATA_DIGEST_EN_SHIFT 26
+#define USTORM_ISCSI_ST_CONTEXT_B_PROTOCOL_ERROR (0x1<<27)
+#define USTORM_ISCSI_ST_CONTEXT_B_PROTOCOL_ERROR_SHIFT 27
+#define USTORM_ISCSI_ST_CONTEXT_B_TASK_VALID (0x1<<28)
+#define USTORM_ISCSI_ST_CONTEXT_B_TASK_VALID_SHIFT 28
+#define USTORM_ISCSI_ST_CONTEXT_TASK_TYPE (0x3<<29)
+#define USTORM_ISCSI_ST_CONTEXT_TASK_TYPE_SHIFT 29
+#define USTORM_ISCSI_ST_CONTEXT_B_ALL_DATA_ACKED (0x1<<31)
+#define USTORM_ISCSI_ST_CONTEXT_B_ALL_DATA_ACKED_SHIFT 31
+};
+
+/*
+ * TCP context region, shared in TOE, RDMA and ISCSI
+ */
+struct tstorm_tcp_st_context_section {
+	u32 flags1;
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_SRTT_20B (0xFFFFFF<<0)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_SRTT_20B_SHIFT 0
+#define TSTORM_TCP_ST_CONTEXT_SECTION_PAWS_INVALID (0x1<<24)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_PAWS_INVALID_SHIFT 24
+#define TSTORM_TCP_ST_CONTEXT_SECTION_TIMESTAMP_EXISTS (0x1<<25)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_TIMESTAMP_EXISTS_SHIFT 25
+#define TSTORM_TCP_ST_CONTEXT_SECTION_ISLE_EXISTS (0x1<<26)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_ISLE_EXISTS_SHIFT 26
+#define TSTORM_TCP_ST_CONTEXT_SECTION_STOP_RX_PAYLOAD (0x1<<27)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_STOP_RX_PAYLOAD_SHIFT 27
+#define TSTORM_TCP_ST_CONTEXT_SECTION_KA_ENABLED (0x1<<28)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_KA_ENABLED_SHIFT 28
+#define TSTORM_TCP_ST_CONTEXT_SECTION_FIRST_RTO_ESTIMATE (0x1<<29)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_FIRST_RTO_ESTIMATE_SHIFT 29
+#define TSTORM_TCP_ST_CONTEXT_SECTION_MAX_SEG_RETRANSMIT_EN (0x1<<30)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_MAX_SEG_RETRANSMIT_EN_SHIFT 30
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RESERVED3 (0x1<<31)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RESERVED3_SHIFT 31
+	u32 flags2;
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_VARIATION_20B (0xFFFFFF<<0)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_RTT_VARIATION_20B_SHIFT 0
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN (0x1<<24)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_EN_SHIFT 24
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_COUNTER_EN (0x1<<25)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_DA_COUNTER_EN_SHIFT 25
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_KA_PROBE_SENT (0x1<<26)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_KA_PROBE_SENT_SHIFT 26
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_PERSIST_PROBE_SENT (0x1<<27)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_PERSIST_PROBE_SENT_SHIFT 27
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<28)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 28
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<29)
+#define TSTORM_TCP_ST_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 29
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_SECOND_ISLE_DROPPED (0x1<<30)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_SECOND_ISLE_DROPPED_SHIFT 30
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_DONT_SUPPORT_OOO (0x1<<31)
+#define __TSTORM_TCP_ST_CONTEXT_SECTION_DONT_SUPPORT_OOO_SHIFT 31
+#if defined(__BIG_ENDIAN)
+	u16 reserved_slowpath;
+	u8 tcp_sm_state_3b;
+	u8 rto_exp_3b;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rto_exp_3b;
+	u8 tcp_sm_state_3b;
+	u16 reserved_slowpath;
+#endif
+	u32 rcv_nxt;
+	u32 timestamp_recent;
+	u32 timestamp_recent_time;
+	u32 cwnd;
+	u32 ss_thresh;
+	u32 cwnd_accum;
+	u32 prev_seg_seq;
+	u32 expected_rel_seq;
+	u32 recover;
+#if defined(__BIG_ENDIAN)
+	u8 retransmit_count;
+	u8 ka_max_probe_count;
+	u8 persist_probe_count;
+	u8 ka_probe_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_probe_count;
+	u8 persist_probe_count;
+	u8 ka_max_probe_count;
+	u8 retransmit_count;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 statistics_counter_id;
+	u8 ooo_support_mode;
+	u8 snd_wnd_scale_4b;
+	u8 dup_ack_count;
+#elif defined(__LITTLE_ENDIAN)
+	u8 dup_ack_count;
+	u8 snd_wnd_scale_4b;
+	u8 ooo_support_mode;
+	u8 statistics_counter_id;
+#endif
+	u32 retransmit_start_time;
+	u32 ka_timeout;
+	u32 ka_interval;
+	u32 isle_start_seq;
+	u32 isle_end_seq;
+#if defined(__BIG_ENDIAN)
+	u16 mss;
+	u16 recent_seg_wnd;
+#elif defined(__LITTLE_ENDIAN)
+	u16 recent_seg_wnd;
+	u16 mss;
+#endif
+	u32 reserved4;
+	u32 max_rt_time;
+#if defined(__BIG_ENDIAN)
+	u16 lsb_mac_address;
+	u16 vlan_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 vlan_id;
+	u16 lsb_mac_address;
+#endif
+	u32 msb_mac_address;
+	u32 reserved2;
+};
+
+/*
+ * Termination variables
+ */
+struct iscsi_term_vars {
+	u8 BitMap;
+#define ISCSI_TERM_VARS_TCP_STATE (0xF<<0)
+#define ISCSI_TERM_VARS_TCP_STATE_SHIFT 0
+#define ISCSI_TERM_VARS_FIN_RECEIVED_SBIT (0x1<<4)
+#define ISCSI_TERM_VARS_FIN_RECEIVED_SBIT_SHIFT 4
+#define ISCSI_TERM_VARS_ACK_ON_FIN_RECEIVED_SBIT (0x1<<5)
+#define ISCSI_TERM_VARS_ACK_ON_FIN_RECEIVED_SBIT_SHIFT 5
+#define ISCSI_TERM_VARS_TERM_ON_CHIP (0x1<<6)
+#define ISCSI_TERM_VARS_TERM_ON_CHIP_SHIFT 6
+#define ISCSI_TERM_VARS_RSRV (0x1<<7)
+#define ISCSI_TERM_VARS_RSRV_SHIFT 7
+};
+
+/*
+ * iSCSI context region, used only in iSCSI
+ */
+struct tstorm_iscsi_st_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 rem_tcp_data_len;
+	u16 brb_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 brb_offset;
+	u16 rem_tcp_data_len;
+#endif
+	u32 b2nh;
+#if defined(__BIG_ENDIAN)
+	u16 rq_cons;
+	u8 flags;
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN (0x1<<0)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN_SHIFT 0
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN (0x1<<1)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN_SHIFT 1
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER (0x1<<2)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER_SHIFT 2
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE (0x1<<3)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE_SHIFT 3
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS (0x1<<4)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS_SHIFT 4
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV (0x7<<5)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV_SHIFT 5
+	u8 hdr_bytes_2_fetch;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hdr_bytes_2_fetch;
+	u8 flags;
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN (0x1<<0)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_HDR_DIGEST_EN_SHIFT 0
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN (0x1<<1)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DATA_DIGEST_EN_SHIFT 1
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER (0x1<<2)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_PARTIAL_HEADER_SHIFT 2
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE (0x1<<3)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_FULL_FEATURE_SHIFT 3
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS (0x1<<4)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_B_DROP_ALL_PDUS_SHIFT 4
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV (0x7<<5)
+#define TSTORM_ISCSI_ST_CONTEXT_SECTION_FLAGS_RSRV_SHIFT 5
+	u16 rq_cons;
+#endif
+	struct regpair rq_db_phy_addr;
+#if defined(__BIG_ENDIAN)
+	struct iscsi_term_vars term_vars;
+	u8 scratchpad_idx;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u8 scratchpad_idx;
+	struct iscsi_term_vars term_vars;
+#endif
+	u32 reserved2;
+};
+
+/*
+ * The iSCSI non-aggregative context of Tstorm
+ */
+struct tstorm_iscsi_st_context {
+	struct tstorm_tcp_st_context_section tcp;
+	struct tstorm_iscsi_st_context_section iscsi;
+};
+
+/*
+ * The tcp aggregative context section of Xstorm
+ */
+struct xstorm_tcp_tcp_ag_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars1;
+	u8 __da_cnt;
+	u16 mss;
+#elif defined(__LITTLE_ENDIAN)
+	u16 mss;
+	u8 __da_cnt;
+	u8 __tcp_agg_vars1;
+#endif
+	u32 snd_nxt;
+	u32 tx_wnd;
+	u32 snd_una;
+	u32 local_adv_wnd;
+#if defined(__BIG_ENDIAN)
+	u8 __agg_val8_th;
+	u8 __agg_val8;
+	u16 tcp_agg_vars2;
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG (0x1<<0)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE (0x1<<5)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN (0x1<<7)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN_SHIFT 7
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 tcp_agg_vars2;
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG (0x1<<0)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_UNBLOCKED_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_TIMER_ACTIVE_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_FLAG_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX4_FLAG_SHIFT 4
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE (0x1<<5)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DA_ENABLE_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN (0x1<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ACK_TO_FE_UPDATED_EN_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN (0x1<<7)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX3_CF_EN_SHIFT 7
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN (0x1<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_FIN_FLAG_EN_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<9)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 9
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_SET_RTO_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_UPDATED_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_SHIFT 14
+	u8 __agg_val8;
+	u8 __agg_val8_th;
+#endif
+	u32 ack_to_far_end;
+	u32 rto_timer;
+	u32 ka_timer;
+	u32 ts_to_echo;
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val7_th;
+	u16 __agg_val7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val7;
+	u16 __agg_val7_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars5;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars3;
+	u8 __force_pure_ack_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __force_pure_ack_cnt;
+	u8 __tcp_agg_vars3;
+	u8 __tcp_agg_vars4;
+	u8 __tcp_agg_vars5;
+#endif
+	u32 tcp_agg_vars6;
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_CF_EN (0x1<<0)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TS_TO_ECHO_CF_EN_SHIFT 0
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_EN (0x1<<1)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX8_CF_EN_SHIFT 1
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_EN (0x1<<2)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_EN_SHIFT 2
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN (0x1<<3)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN_SHIFT 3
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX6_FLAG (0x1<<4)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX6_FLAG_SHIFT 4
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX7_FLAG (0x1<<5)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX7_FLAG_SHIFT 5
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX5_CF (0x3<<6)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX5_CF_SHIFT 6
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF (0x3<<8)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX9_CF_SHIFT 8
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF (0x3<<10)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_SHIFT 10
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF (0x3<<12)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_SHIFT 12
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF (0x3<<14)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_SHIFT 14
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX13_CF (0x3<<16)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX13_CF_SHIFT 16
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX14_CF (0x3<<18)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX14_CF_SHIFT 18
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX15_CF (0x3<<20)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX15_CF_SHIFT 20
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX16_CF (0x3<<22)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX16_CF_SHIFT 22
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX17_CF (0x3<<24)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX17_CF_SHIFT 24
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ECE_FLAG (0x1<<26)
+#define XSTORM_TCP_TCP_AG_CONTEXT_SECTION_ECE_FLAG_SHIFT 26
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED71 (0x1<<27)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED71_SHIFT 27
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_FORCE_PURE_ACK_CNT_DIRTY (0x1<<28)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_FORCE_PURE_ACK_CNT_DIRTY_SHIFT 28
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TCP_AUTO_STOP_FLAG (0x1<<29)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_TCP_AUTO_STOP_FLAG_SHIFT 29
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DO_TS_UPDATE_FLAG (0x1<<30)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_DO_TS_UPDATE_FLAG_SHIFT 30
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_CANCEL_RETRANSMIT_FLAG (0x1<<31)
+#define __XSTORM_TCP_TCP_AG_CONTEXT_SECTION_CANCEL_RETRANSMIT_FLAG_SHIFT 31
+#if defined(__BIG_ENDIAN)
+	u16 __agg_misc6;
+	u16 __tcp_agg_vars7;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __tcp_agg_vars7;
+	u16 __agg_misc6;
+#endif
+	u32 __agg_val10;
+	u32 __agg_val10_th;
+#if defined(__BIG_ENDIAN)
+	u16 __reserved3;
+	u8 __reserved2;
+	u8 __da_only_cnt;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __da_only_cnt;
+	u8 __reserved2;
+	u16 __reserved3;
+#endif
+};
+
+/*
+ * The iscsi aggregative context of Xstorm
+ */
+struct xstorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 agg_val1;
+	u8 agg_vars1;
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN_SHIFT 7
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_MORE_TO_SEND_EN_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN (0x1<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_NAGLE_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_UNA_GT_NXT_EN_SHIFT 7
+	u16 agg_val1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_reserved;
+	u8 agg_vars4;
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF (0x3<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN_SHIFT 4
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN (0x1<<5)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN_SHIFT 7
+	u8 agg_vars3;
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 agg_vars2;
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars2;
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF (0x3<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN (0x1<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_SPARE_FLAG_EN_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX8_FLAG_SHIFT 3
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX9_FLAG_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1 (0x3<<5)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE1_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 agg_vars3;
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2 (0x3F<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM2_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF (0x3<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_SHIFT 6
+	u8 agg_vars4;
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF (0x3<<2)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_SHIFT 2
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN (0x1<<4)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_EN_SHIFT 4
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN (0x1<<5)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX19_CF_EN_SHIFT 5
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN (0x1<<6)
+#define __XSTORM_ISCSI_AG_CONTEXT_R2TQ_PROD_CF_EN_SHIFT 6
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN (0x1<<7)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX21_CF_EN_SHIFT 7
+	u8 cdu_reserved;
+#endif
+	u32 more_to_send;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars5;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2 (0x3<<14)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2_SHIFT 14
+	u16 sq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_cons;
+	u16 agg_vars5;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5 (0x3<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE5_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0 (0x3F<<2)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM0_SHIFT 2
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1 (0x3F<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_PHYSICAL_QUEUE_NUM1_SHIFT 8
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2 (0x3<<14)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE2_SHIFT 14
+#endif
+	struct xstorm_tcp_tcp_ag_context_section tcp;
+#if defined(__BIG_ENDIAN)
+	u16 agg_vars7;
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF (0x3<<4)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK (0x1<<10)
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK_SHIFT 10
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+	u8 agg_val3_th;
+	u8 agg_vars6;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7 (0x7<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4_SHIFT 6
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_vars6;
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6 (0x7<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE6_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7 (0x7<<3)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE7_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE4_SHIFT 6
+	u8 agg_val3_th;
+	u16 agg_vars7;
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE (0x7<<0)
+#define __XSTORM_ISCSI_AG_CONTEXT_AGG_VAL11_DECISION_RULE_SHIFT 0
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG (0x1<<3)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX13_FLAG_SHIFT 3
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF (0x3<<4)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX18_CF_SHIFT 4
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3 (0x3<<6)
+#define XSTORM_ISCSI_AG_CONTEXT_DECISION_RULE3_SHIFT 6
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF (0x3<<8)
+#define XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_SHIFT 8
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK (0x1<<10)
+#define __XSTORM_ISCSI_AG_CONTEXT_COMPLETION_SEQ_DECISION_MASK_SHIFT 10
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN (0x1<<11)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX1_CF_EN_SHIFT 11
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG (0x1<<12)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX10_FLAG_SHIFT 12
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG (0x1<<13)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX11_FLAG_SHIFT 13
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG (0x1<<14)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX12_FLAG_SHIFT 14
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG (0x1<<15)
+#define __XSTORM_ISCSI_AG_CONTEXT_AUX2_FLAG_SHIFT 15
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val11_th;
+	u16 __agg_val11;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val11;
+	u16 __agg_val11_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __reserved1;
+	u8 __agg_val6_th;
+	u16 __agg_val9;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val9;
+	u8 __agg_val6_th;
+	u8 __reserved1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 hq_prod;
+	u16 hq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_cons;
+	u16 hq_prod;
+#endif
+	u32 agg_vars8;
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC2 (0xFFFFFF<<0)
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC2_SHIFT 0
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC3 (0xFF<<24)
+#define XSTORM_ISCSI_AG_CONTEXT_AGG_MISC3_SHIFT 24
+#if defined(__BIG_ENDIAN)
+	u16 r2tq_prod;
+	u16 sq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sq_prod;
+	u16 r2tq_prod;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3;
+	u8 agg_val6;
+	u8 agg_val5_th;
+	u8 agg_val5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 agg_val5;
+	u8 agg_val5_th;
+	u8 agg_val6;
+	u8 agg_val3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_misc1;
+	u16 agg_limit1;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_limit1;
+	u16 __agg_misc1;
+#endif
+	u32 hq_cons_tcp_seq;
+	u32 exp_stat_sn;
+	u32 agg_misc5;
+};
+
+/*
+ * The tcp aggregative context section of Tstorm
+ */
+struct tstorm_tcp_tcp_ag_context_section {
+	u32 __agg_val1;
+#if defined(__BIG_ENDIAN)
+	u8 __tcp_agg_vars2;
+	u8 __agg_val3;
+	u16 __agg_val2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_val2;
+	u8 __agg_val3;
+	u8 __tcp_agg_vars2;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val5;
+	u8 __agg_val6;
+	u8 __tcp_agg_vars3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __tcp_agg_vars3;
+	u8 __agg_val6;
+	u16 __agg_val5;
+#endif
+	u32 snd_nxt;
+	u32 rtt_seq;
+	u32 rtt_time;
+	u32 __reserved66;
+	u32 wnd_right_edge;
+	u32 tcp_agg_vars1;
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<0)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 0
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG (0x1<<1)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_LAST_PACKET_FIN_FLAG_SHIFT 1
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF (0x3<<2)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_SHIFT 2
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF (0x3<<4)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_SHIFT 4
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_EN (0x1<<6)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_WND_UPD_CF_EN_SHIFT 6
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_EN (0x1<<7)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TIMEOUT_CF_EN_SHIFT 7
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN (0x1<<8)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_SEQ_EN_SHIFT 8
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_SND_NXT_EN (0x1<<9)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_SND_NXT_EN_SHIFT 9
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG (0x1<<10)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_FLAG_SHIFT 10
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_FLAG (0x1<<11)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_FLAG_SHIFT 11
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_EN (0x1<<12)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_EN_SHIFT 12
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_EN (0x1<<13)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_EN_SHIFT 13
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF (0x3<<14)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX1_CF_SHIFT 14
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF (0x3<<16)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX2_CF_SHIFT 16
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_BLOCKED (0x1<<18)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_TX_BLOCKED_SHIFT 18
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN (0x1<<19)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX10_CF_EN_SHIFT 19
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_EN (0x1<<20)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX11_CF_EN_SHIFT 20
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_EN (0x1<<21)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_AUX12_CF_EN_SHIFT 21
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED1 (0x3<<22)
+#define __TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RESERVED1_SHIFT 22
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ (0xF<<24)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_PEND_SEQ_SHIFT 24
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ (0xF<<28)
+#define TSTORM_TCP_TCP_AG_CONTEXT_SECTION_RETRANSMIT_DONE_SEQ_SHIFT 28
+	u32 snd_max;
+	u32 snd_una;
+	u32 __reserved2;
+};
+
+/*
+ * The iscsi aggregative context of Tstorm
+ */
+struct tstorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u16 ulp_credit;
+	u8 agg_vars1;
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define TSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG (0x1<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX3_FLAG_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG (0x1<<7)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_FLAG_SHIFT 7
+	u16 ulp_credit;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __agg_val4;
+	u16 agg_vars2;
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<11)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 11
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_vars2;
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG (0x1<<0)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_FLAG_SHIFT 0
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG (0x1<<1)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_FLAG_SHIFT 1
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF (0x3<<2)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_SHIFT 2
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF (0x3<<4)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_SHIFT 4
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF (0x3<<6)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_SHIFT 6
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF (0x3<<8)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_SHIFT 8
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG (0x1<<10)
+#define __TSTORM_ISCSI_AG_CONTEXT_AUX7_FLAG_SHIFT 10
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<11)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 11
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN (0x1<<12)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX4_CF_EN_SHIFT 12
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN (0x1<<13)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX5_CF_EN_SHIFT 13
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN (0x1<<14)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX6_CF_EN_SHIFT 14
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN (0x1<<15)
+#define TSTORM_ISCSI_AG_CONTEXT_AUX7_CF_EN_SHIFT 15
+	u16 __agg_val4;
+#endif
+	struct tstorm_tcp_tcp_ag_context_section tcp;
+};
+
+/*
+ * The iscsi aggregative context of Cstorm
+ */
+struct cstorm_iscsi_ag_context {
+	u32 agg_vars1;
+#define CSTORM_ISCSI_AG_CONTEXT_STATE (0xFF<<0)
+#define CSTORM_ISCSI_AG_CONTEXT_STATE_SHIFT 0
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<8)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 8
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<9)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 9
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<10)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 10
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<11)
+#define __CSTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 11
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_SE_CF_EN (0x1<<12)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_SE_CF_EN_SHIFT 12
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_INV_CF_EN (0x1<<13)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED_ULP_RX_INV_CF_EN_SHIFT 13
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF (0x3<<14)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_SHIFT 14
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED66 (0x3<<16)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED66_SHIFT 16
+#define __CSTORM_ISCSI_AG_CONTEXT_FIN_RECEIVED_CF_EN (0x1<<18)
+#define __CSTORM_ISCSI_AG_CONTEXT_FIN_RECEIVED_CF_EN_SHIFT 18
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION0_CF_EN (0x1<<19)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION0_CF_EN_SHIFT 19
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION1_CF_EN (0x1<<20)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION1_CF_EN_SHIFT 20
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION2_CF_EN (0x1<<21)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION2_CF_EN_SHIFT 21
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_EN (0x1<<22)
+#define __CSTORM_ISCSI_AG_CONTEXT_PENDING_COMPLETION3_CF_EN_SHIFT 22
+#define __CSTORM_ISCSI_AG_CONTEXT_REL_SEQ_RULE (0x7<<23)
+#define __CSTORM_ISCSI_AG_CONTEXT_REL_SEQ_RULE_SHIFT 23
+#define CSTORM_ISCSI_AG_CONTEXT_HQ_PROD_RULE (0x3<<26)
+#define CSTORM_ISCSI_AG_CONTEXT_HQ_PROD_RULE_SHIFT 26
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED52 (0x3<<28)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED52_SHIFT 28
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED53 (0x3<<30)
+#define __CSTORM_ISCSI_AG_CONTEXT_RESERVED53_SHIFT 30
+#if defined(__BIG_ENDIAN)
+	u8 __aux1_th;
+	u8 __aux1_val;
+	u16 __agg_vars2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __agg_vars2;
+	u8 __aux1_val;
+	u8 __aux1_th;
+#endif
+	u32 rel_seq;
+	u32 rel_seq_th;
+#if defined(__BIG_ENDIAN)
+	u16 hq_cons;
+	u16 hq_prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_prod;
+	u16 hq_cons;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __reserved62;
+	u8 __reserved61;
+	u8 __reserved60;
+	u8 __reserved59;
+#elif defined(__LITTLE_ENDIAN)
+	u8 __reserved59;
+	u8 __reserved60;
+	u8 __reserved61;
+	u8 __reserved62;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __reserved64;
+	u16 __cq_u_prod0;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod0;
+	u16 __reserved64;
+#endif
+	u32 __cq_u_prod1;
+#if defined(__BIG_ENDIAN)
+	u16 __agg_vars3;
+	u16 __cq_u_prod2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod2;
+	u16 __agg_vars3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __aux2_th;
+	u16 __cq_u_prod3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_u_prod3;
+	u16 __aux2_th;
+#endif
+};
+
+/*
+ * The iscsi aggregative context of Ustorm
+ */
+struct ustorm_iscsi_ag_context {
+#if defined(__BIG_ENDIAN)
+	u8 __aux_counter_flags;
+	u8 agg_vars2;
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 agg_vars1;
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 state;
+#elif defined(__LITTLE_ENDIAN)
+	u8 state;
+	u8 agg_vars1;
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0 (0x1<<0)
+#define __USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM0_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1 (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM1_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2 (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM2_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3 (0x1<<3)
+#define USTORM_ISCSI_AG_CONTEXT_EXISTS_IN_QM3_SHIFT 3
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF (0x3<<4)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_SHIFT 4
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF (0x3<<6)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_SHIFT 6
+	u8 agg_vars2;
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF (0x3<<0)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF (0x3<<2)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_SHIFT 2
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE (0x7<<4)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_MISC4_RULE_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_MASK_SHIFT 7
+	u8 __aux_counter_flags;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 cdu_usage;
+	u8 agg_misc2;
+	u16 __cq_local_comp_itt_val;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __cq_local_comp_itt_val;
+	u8 agg_misc2;
+	u8 cdu_usage;
+#endif
+	u32 agg_misc4;
+#if defined(__BIG_ENDIAN)
+	u8 agg_val3_th;
+	u8 agg_val3;
+	u16 agg_misc3;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_misc3;
+	u8 agg_val3;
+	u8 agg_val3_th;
+#endif
+	u32 agg_val1;
+	u32 agg_misc4_th;
+#if defined(__BIG_ENDIAN)
+	u16 agg_val2_th;
+	u16 agg_val2;
+#elif defined(__LITTLE_ENDIAN)
+	u16 agg_val2;
+	u16 agg_val2_th;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 __reserved2;
+	u8 decision_rules;
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE (0x7<<0)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1_SHIFT 7
+	u8 decision_rule_enable_bits;
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN (0x1<<0)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN (0x1<<4)
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN (0x1<<5)
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN_SHIFT 5
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+#elif defined(__LITTLE_ENDIAN)
+	u8 decision_rule_enable_bits;
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN (0x1<<0)
+#define USTORM_ISCSI_AG_CONTEXT_INV_CF_EN_SHIFT 0
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN (0x1<<1)
+#define USTORM_ISCSI_AG_CONTEXT_COMPLETION_CF_EN_SHIFT 1
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN (0x1<<2)
+#define USTORM_ISCSI_AG_CONTEXT_TX_CF_EN_SHIFT 2
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN (0x1<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_TIMER_CF_EN_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN (0x1<<4)
+#define __USTORM_ISCSI_AG_CONTEXT_CQ_LOCAL_COMP_CF_EN_SHIFT 4
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN (0x1<<5)
+#define __USTORM_ISCSI_AG_CONTEXT_QUEUES_FLUSH_Q0_CF_EN_SHIFT 5
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AUX3_CF_EN_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_DQ_CF_EN_SHIFT 7
+	u8 decision_rules;
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE (0x7<<0)
+#define USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_RULE_SHIFT 0
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE (0x7<<3)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL3_RULE_SHIFT 3
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG (0x1<<6)
+#define __USTORM_ISCSI_AG_CONTEXT_AGG_VAL2_ARM_N_FLAG_SHIFT 6
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1 (0x1<<7)
+#define __USTORM_ISCSI_AG_CONTEXT_RESERVED1_SHIFT 7
+	u16 __reserved2;
+#endif
+};
+
+/*
+ * Timers connection context
+ */
+struct iscsi_timers_block_context {
+	u32 __reserved_0;
+	u32 __reserved_1;
+	u32 __reserved_2;
+	u32 flags;
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS (0x3<<0)
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_NUM_OF_ACTIVE_TIMERS_SHIFT 0
+#define ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG (0x1<<2)
+#define ISCSI_TIMERS_BLOCK_CONTEXT_CONN_VALID_FLG_SHIFT 2
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_RESERVED0 (0x1FFFFFFF<<3)
+#define __ISCSI_TIMERS_BLOCK_CONTEXT_RESERVED0_SHIFT 3
+};
+
+/*
+ * Ethernet context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_eth_context_section {
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_4;
+	u8 remote_addr_5;
+	u8 local_addr_0;
+	u8 local_addr_1;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_1;
+	u8 local_addr_0;
+	u8 remote_addr_5;
+	u8 remote_addr_4;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_0;
+	u8 remote_addr_1;
+	u8 remote_addr_2;
+	u8 remote_addr_3;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_3;
+	u8 remote_addr_2;
+	u8 remote_addr_1;
+	u8 remote_addr_0;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 reserved_vlan_type;
+	u16 params;
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+#elif defined(__LITTLE_ENDIAN)
+	u16 params;
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID (0xFFF<<0)
+#define XSTORM_ETH_CONTEXT_SECTION_VLAN_ID_SHIFT 0
+#define XSTORM_ETH_CONTEXT_SECTION_CFI (0x1<<12)
+#define XSTORM_ETH_CONTEXT_SECTION_CFI_SHIFT 12
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY (0x7<<13)
+#define XSTORM_ETH_CONTEXT_SECTION_PRIORITY_SHIFT 13
+	u16 reserved_vlan_type;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 local_addr_2;
+	u8 local_addr_3;
+	u8 local_addr_4;
+	u8 local_addr_5;
+#elif defined(__LITTLE_ENDIAN)
+	u8 local_addr_5;
+	u8 local_addr_4;
+	u8 local_addr_3;
+	u8 local_addr_2;
+#endif
+};
+
+/*
+ * IpV4 context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_ip_v4_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_id;
+	u16 __pbf_hdr_cmd_rsvd_flags_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_flags_offset;
+	u16 __pbf_hdr_cmd_rsvd_id;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 __pbf_hdr_cmd_rsvd_ver_ihl;
+	u8 tos;
+	u16 __pbf_hdr_cmd_rsvd_length;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_length;
+	u8 tos;
+	u8 __pbf_hdr_cmd_rsvd_ver_ihl;
+#endif
+	u32 ip_local_addr;
+#if defined(__BIG_ENDIAN)
+	u8 ttl;
+	u8 __pbf_hdr_cmd_rsvd_protocol;
+	u16 __pbf_hdr_cmd_rsvd_csum;
+#elif defined(__LITTLE_ENDIAN)
+	u16 __pbf_hdr_cmd_rsvd_csum;
+	u8 __pbf_hdr_cmd_rsvd_protocol;
+	u8 ttl;
+#endif
+	u32 __pbf_hdr_cmd_rsvd_1;
+	u32 ip_remote_addr;
+};
+
+/*
+ * context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_padded_ip_v4_context_section {
+	struct xstorm_ip_v4_context_section ip_v4;
+	u32 reserved1[4];
+};
+
+/*
+ * IpV6 context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_ip_v6_context_section {
+#if defined(__BIG_ENDIAN)
+	u16 pbf_hdr_cmd_rsvd_payload_len;
+	u8 pbf_hdr_cmd_rsvd_nxt_hdr;
+	u8 hop_limit;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hop_limit;
+	u8 pbf_hdr_cmd_rsvd_nxt_hdr;
+	u16 pbf_hdr_cmd_rsvd_payload_len;
+#endif
+	u32 priority_flow_label;
+#define XSTORM_IP_V6_CONTEXT_SECTION_FLOW_LABEL (0xFFFFF<<0)
+#define XSTORM_IP_V6_CONTEXT_SECTION_FLOW_LABEL_SHIFT 0
+#define XSTORM_IP_V6_CONTEXT_SECTION_TRAFFIC_CLASS (0xFF<<20)
+#define XSTORM_IP_V6_CONTEXT_SECTION_TRAFFIC_CLASS_SHIFT 20
+#define XSTORM_IP_V6_CONTEXT_SECTION_PBF_HDR_CMD_RSVD_VER (0xF<<28)
+#define XSTORM_IP_V6_CONTEXT_SECTION_PBF_HDR_CMD_RSVD_VER_SHIFT 28
+	u32 ip_local_addr_lo_hi;
+	u32 ip_local_addr_lo_lo;
+	u32 ip_local_addr_hi_hi;
+	u32 ip_local_addr_hi_lo;
+	u32 ip_remote_addr_lo_hi;
+	u32 ip_remote_addr_lo_lo;
+	u32 ip_remote_addr_hi_hi;
+	u32 ip_remote_addr_hi_lo;
+};
+
+union xstorm_ip_context_section_types {
+	struct xstorm_padded_ip_v4_context_section padded_ip_v4;
+	struct xstorm_ip_v6_context_section ip_v6;
+};
+
+/*
+ * TCP context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_tcp_context_section {
+	u32 snd_max;
+#if defined(__BIG_ENDIAN)
+	u16 remote_port;
+	u16 local_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_port;
+	u16 remote_port;
+#endif
+#if defined(__BIG_ENDIAN)
+	u8 original_nagle_1b;
+	u8 ts_enabled_1b;
+	u16 tcp_params;
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE (0xFF<<0)
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE_SHIFT 0
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT (0x1<<8)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT_SHIFT 8
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED (0x1<<9)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED_SHIFT 9
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED (0x1<<10)
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED_SHIFT 10
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE (0x1<<11)
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE_SHIFT 11
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<12)
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 12
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED (0x1<<13)
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED_SHIFT 13
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER (0x3<<14)
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER_SHIFT 14
+#elif defined(__LITTLE_ENDIAN)
+	u16 tcp_params;
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE (0xFF<<0)
+#define XSTORM_TCP_CONTEXT_SECTION_TOTAL_HEADER_SIZE_SHIFT 0
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT (0x1<<8)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECT_BIT_SHIFT 8
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED (0x1<<9)
+#define __XSTORM_TCP_CONTEXT_SECTION_ECN_ENABLED_SHIFT 9
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED (0x1<<10)
+#define XSTORM_TCP_CONTEXT_SECTION_SACK_ENABLED_SHIFT 10
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE (0x1<<11)
+#define XSTORM_TCP_CONTEXT_SECTION_KA_STATE_SHIFT 11
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG (0x1<<12)
+#define XSTORM_TCP_CONTEXT_SECTION_FIN_SENT_FLAG_SHIFT 12
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED (0x1<<13)
+#define XSTORM_TCP_CONTEXT_SECTION_WINDOW_SATURATED_SHIFT 13
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER (0x3<<14)
+#define XSTORM_TCP_CONTEXT_SECTION_SLOWPATH_QUEUES_FLUSH_COUNTER_SHIFT 14
+	u8 ts_enabled_1b;
+	u8 original_nagle_1b;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 pseudo_csum;
+	u16 window_scaling_factor;
+#elif defined(__LITTLE_ENDIAN)
+	u16 window_scaling_factor;
+	u16 pseudo_csum;
+#endif
+	u32 reserved2;
+	u32 ts_time_diff;
+	u32 __next_timer_expir;
+};
+
+/*
+ * Common context section, shared in TOE, RDMA and ISCSI
+ */
+struct xstorm_common_context_section {
+	struct xstorm_eth_context_section ethernet;
+	union xstorm_ip_context_section_types ip_union;
+	struct xstorm_tcp_context_section tcp;
+#if defined(__BIG_ENDIAN)
+	u16 reserved;
+	u8 statistics_params;
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<0)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 0
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<1)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 1
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID (0x1F<<2)
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID_SHIFT 2
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0 (0x1<<7)
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0_SHIFT 7
+	u8 ip_version_1b;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ip_version_1b;
+	u8 statistics_params;
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS (0x1<<0)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L2_STATSTICS_SHIFT 0
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS (0x1<<1)
+#define XSTORM_COMMON_CONTEXT_SECTION_UPDATE_L4_STATSTICS_SHIFT 1
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID (0x1F<<2)
+#define XSTORM_COMMON_CONTEXT_SECTION_STATISTICS_COUNTER_ID_SHIFT 2
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0 (0x1<<7)
+#define XSTORM_COMMON_CONTEXT_SECTION_RESERVED0_SHIFT 7
+	u16 reserved;
+#endif
+};
+
+/*
+ * Flags used in ISCSI context section
+ */
+struct xstorm_iscsi_context_flags {
+	u8 flags;
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_IMMEDIATE_DATA_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_INITIAL_R2T_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_HEADER_DIGEST (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_HEADER_DIGEST_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_DATA_DIGEST (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_EN_DATA_DIGEST_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_HQ_BD_WRITTEN (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_HQ_BD_WRITTEN_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_LAST_OP_SQ (0x1<<5)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_LAST_OP_SQ_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_UPDATE_SND_NXT (0x1<<6)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_B_UPDATE_SND_NXT_SHIFT 6
+#define XSTORM_ISCSI_CONTEXT_FLAGS_RESERVED4 (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_FLAGS_RESERVED4_SHIFT 7
+};
+
+struct iscsi_task_context_entry_x {
+	u32 data_out_buffer_offset;
+	u32 itt;
+	u32 data_sn;
+};
+
+struct iscsi_task_context_entry_xuc_x_write_only {
+	u32 tx_r2t_sn;
+};
+
+struct iscsi_task_context_entry_xuc_xu_write_both {
+	u32 sgl_base_lo;
+	u32 sgl_base_hi;
+#if defined(__BIG_ENDIAN)
+	u8 sgl_size;
+	u8 sge_index;
+	u16 sge_offset;
+#elif defined(__LITTLE_ENDIAN)
+	u16 sge_offset;
+	u8 sge_index;
+	u8 sgl_size;
+#endif
+};
+
+/*
+ * iSCSI context section
+ */
+struct xstorm_iscsi_context_section {
+	u32 first_burst_length;
+	u32 max_send_pdu_length;
+	struct regpair sq_pbl_base;
+	struct regpair sq_curr_pbe;
+	struct regpair hq_pbl_base;
+	struct regpair hq_curr_pbe_base;
+	struct regpair r2tq_pbl_base;
+	struct regpair r2tq_curr_pbe_base;
+	struct regpair task_pbl_base;
+#if defined(__BIG_ENDIAN)
+	u16 data_out_count;
+	struct xstorm_iscsi_context_flags flags;
+	u8 task_pbl_cache_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 task_pbl_cache_idx;
+	struct xstorm_iscsi_context_flags flags;
+	u16 data_out_count;
+#endif
+	u32 seq_more_2_send;
+	u32 pdu_more_2_send;
+	struct iscsi_task_context_entry_x temp_tce_x;
+	struct iscsi_task_context_entry_xuc_x_write_only temp_tce_x_wr;
+	struct iscsi_task_context_entry_xuc_xu_write_both temp_tce_xu_wr;
+	struct regpair lun;
+	u32 exp_data_transfer_len_ttt;
+	u32 pdu_data_2_rxmit;
+	u32 rxmit_bytes_2_dr;
+#if defined(__BIG_ENDIAN)
+	u16 rxmit_sge_offset;
+	u16 hq_rxmit_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_rxmit_cons;
+	u16 rxmit_sge_offset;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 r2tq_cons;
+	u8 rxmit_flags;
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING (0x3<<5)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT_SHIFT 7
+	u8 rxmit_sge_idx;
+#elif defined(__LITTLE_ENDIAN)
+	u8 rxmit_sge_idx;
+	u8 rxmit_flags;
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD (0x1<<0)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_NEW_HQ_BD_SHIFT 0
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR (0x1<<1)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PDU_HDR_SHIFT 1
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU (0x1<<2)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_END_PDU_SHIFT 2
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR (0x1<<3)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_DR_SHIFT 3
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR (0x1<<4)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_START_DR_SHIFT 4
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING (0x3<<5)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_RXMIT_PADDING_SHIFT 5
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT (0x1<<7)
+#define XSTORM_ISCSI_CONTEXT_SECTION_B_ISCSI_CONT_FAST_RXMIT_SHIFT 7
+	u16 r2tq_cons;
+#endif
+	u32 hq_rxmit_tcp_seq;
+};
+
+/*
+ * Xstorm iSCSI Storm Context
+ */
+struct xstorm_iscsi_st_context {
+	struct xstorm_common_context_section common;
+	struct xstorm_iscsi_context_section iscsi;
+};
+
+/*
+ * CQ DB CQ producer and pending completion counter
+ */
+struct iscsi_cq_db_prod_pnd_cmpltn_cnt {
+#if defined(__BIG_ENDIAN)
+	u16 cntr;
+	u16 prod;
+#elif defined(__LITTLE_ENDIAN)
+	u16 prod;
+	u16 cntr;
+#endif
+};
+
+/*
+ * CQ DB pending completion ITT array
+ */
+struct iscsi_cq_db_prod_pnd_cmpltn_cnt_arr {
+	struct iscsi_cq_db_prod_pnd_cmpltn_cnt prod_pend_comp[8];
+};
+
+/*
+ * Cstorm CQ sequence to notify array, updated by driver
+ */
+struct iscsi_cq_db_sqn_2_notify_arr {
+	u16 sqn[8];
+};
+
+/*
+ * Cstorm iSCSI Storm Context
+ */
+struct cstorm_iscsi_st_context {
+	struct iscsi_cq_db_prod_pnd_cmpltn_cnt_arr cq_c_prod_pend_comp_ctr_arr;
+	struct iscsi_cq_db_sqn_2_notify_arr cq_c_prod_sqn_arr;
+	struct iscsi_cq_db_sqn_2_notify_arr cq_c_sqn_2_notify_arr;
+	struct regpair hq_pbl_base;
+	struct regpair hq_curr_pbe;
+	struct regpair task_pbl_base;
+	struct regpair cq_db_base;
+#if defined(__BIG_ENDIAN)
+	u16 hq_bd_itt;
+	u16 iscsi_conn_id;
+#elif defined(__LITTLE_ENDIAN)
+	u16 iscsi_conn_id;
+	u16 hq_bd_itt;
+#endif
+	u32 hq_bd_data_segment_len;
+	u32 hq_bd_buffer_offset;
+#if defined(__BIG_ENDIAN)
+	u8 timer_entry_idx;
+	u8 cq_proc_en_bit_map;
+	u8 cq_pend_comp_itt_valid_bit_map;
+	u8 hq_bd_opcode;
+#elif defined(__LITTLE_ENDIAN)
+	u8 hq_bd_opcode;
+	u8 cq_pend_comp_itt_valid_bit_map;
+	u8 cq_proc_en_bit_map;
+	u8 timer_entry_idx;
+#endif
+	u32 hq_tcp_seq;
+#if defined(__BIG_ENDIAN)
+	u16 flags;
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN (0x1<<0)
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN_SHIFT 0
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN (0x1<<1)
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN_SHIFT 1
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID (0x1<<2)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID_SHIFT 2
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG (0x1<<3)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG_SHIFT 3
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK (0x1<<4)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK_SHIFT 4
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV (0x7FF<<5)
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV_SHIFT 5
+	u16 hq_cons;
+#elif defined(__LITTLE_ENDIAN)
+	u16 hq_cons;
+	u16 flags;
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN (0x1<<0)
+#define CSTORM_ISCSI_ST_CONTEXT_DATA_DIGEST_EN_SHIFT 0
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN (0x1<<1)
+#define CSTORM_ISCSI_ST_CONTEXT_HDR_DIGEST_EN_SHIFT 1
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID (0x1<<2)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_CTXT_VALID_SHIFT 2
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG (0x1<<3)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_LCL_CMPLN_FLG_SHIFT 3
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK (0x1<<4)
+#define CSTORM_ISCSI_ST_CONTEXT_HQ_BD_WRITE_TASK_SHIFT 4
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV (0x7FF<<5)
+#define CSTORM_ISCSI_ST_CONTEXT_CTRL_FLAGS_RSRV_SHIFT 5
+#endif
+	struct regpair rsrv1;
+};
+
+/*
+ * Iscsi connection context
+ */
+struct iscsi_context {
+	struct ustorm_iscsi_st_context ustorm_st_context;
+	struct tstorm_iscsi_st_context tstorm_st_context;
+	struct xstorm_iscsi_ag_context xstorm_ag_context;
+	struct tstorm_iscsi_ag_context tstorm_ag_context;
+	struct cstorm_iscsi_ag_context cstorm_ag_context;
+	struct ustorm_iscsi_ag_context ustorm_ag_context;
+	struct iscsi_timers_block_context timers_context;
+	struct regpair upb_context;
+	struct xstorm_iscsi_st_context xstorm_st_context;
+	struct regpair xpb_context;
+	struct cstorm_iscsi_st_context cstorm_st_context;
+};
+
+/*
+ * Buffer per connection, used in Tstorm
+ */
+struct iscsi_conn_buf {
+	struct regpair reserved[8];
+};
+
+/*
+ * ipv6 structure
+ */
+struct ip_v6_addr {
+	u32 ip_addr_lo_lo;
+	u32 ip_addr_lo_hi;
+	u32 ip_addr_hi_lo;
+	u32 ip_addr_hi_hi;
+};
+
+/*
+ * l5cm- connection identification params
+ */
+struct l5cm_conn_addr_params {
+	u32 pmtu;
+#if defined(__BIG_ENDIAN)
+	u8 remote_addr_3;
+	u8 remote_addr_2;
+	u8 remote_addr_1;
+	u8 remote_addr_0;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_0;
+	u8 remote_addr_1;
+	u8 remote_addr_2;
+	u8 remote_addr_3;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 params;
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION (0x1<<0)
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION_SHIFT 0
+#define L5CM_CONN_ADDR_PARAMS_RSRV (0x7FFF<<1)
+#define L5CM_CONN_ADDR_PARAMS_RSRV_SHIFT 1
+	u8 remote_addr_5;
+	u8 remote_addr_4;
+#elif defined(__LITTLE_ENDIAN)
+	u8 remote_addr_4;
+	u8 remote_addr_5;
+	u16 params;
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION (0x1<<0)
+#define L5CM_CONN_ADDR_PARAMS_IP_VERSION_SHIFT 0
+#define L5CM_CONN_ADDR_PARAMS_RSRV (0x7FFF<<1)
+#define L5CM_CONN_ADDR_PARAMS_RSRV_SHIFT 1
+#endif
+	struct ip_v6_addr local_ip_addr;
+	struct ip_v6_addr remote_ip_addr;
+	u32 ipv6_flow_label_20b;
+	u32 reserved1;
+#if defined(__BIG_ENDIAN)
+	u16 remote_tcp_port;
+	u16 local_tcp_port;
+#elif defined(__LITTLE_ENDIAN)
+	u16 local_tcp_port;
+	u16 remote_tcp_port;
+#endif
+};
+
+/*
+ * l5cm-xstorm connection buffer
+ */
+struct l5cm_xstorm_conn_buffer {
+#if defined(__BIG_ENDIAN)
+	u16 rsrv1;
+	u16 params;
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE (0x1<<0)
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE_SHIFT 0
+#define L5CM_XSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_XSTORM_CONN_BUFFER_RSRV_SHIFT 1
+#elif defined(__LITTLE_ENDIAN)
+	u16 params;
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE (0x1<<0)
+#define L5CM_XSTORM_CONN_BUFFER_NAGLE_ENABLE_SHIFT 0
+#define L5CM_XSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_XSTORM_CONN_BUFFER_RSRV_SHIFT 1
+	u16 rsrv1;
+#endif
+#if defined(__BIG_ENDIAN)
+	u16 mss;
+	u16 pseudo_header_checksum;
+#elif defined(__LITTLE_ENDIAN)
+	u16 pseudo_header_checksum;
+	u16 mss;
+#endif
+	u32 rcv_buf;
+	u32 rsrv2;
+	struct regpair context_addr;
+};
+
+/*
+ * l5cm-tstorm connection buffer
+ */
+struct l5cm_tstorm_conn_buffer {
+	u32 snd_buf;
+	u32 rcv_buf;
+#if defined(__BIG_ENDIAN)
+	u16 params;
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE (0x1<<0)
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE_SHIFT 0
+#define L5CM_TSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_TSTORM_CONN_BUFFER_RSRV_SHIFT 1
+	u8 ka_max_probe_count;
+	u8 ka_enable;
+#elif defined(__LITTLE_ENDIAN)
+	u8 ka_enable;
+	u8 ka_max_probe_count;
+	u16 params;
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE (0x1<<0)
+#define L5CM_TSTORM_CONN_BUFFER_DELAYED_ACK_ENABLE_SHIFT 0
+#define L5CM_TSTORM_CONN_BUFFER_RSRV (0x7FFF<<1)
+#define L5CM_TSTORM_CONN_BUFFER_RSRV_SHIFT 1
+#endif
+	u32 ka_timeout;
+	u32 ka_interval;
+	u32 max_rt_time;
+};
+
+/*
+ * l5cm connection buffer for active side
+ */
+struct l5cm_active_conn_buffer {
+	struct l5cm_conn_addr_params conn_addr_buf;
+	struct l5cm_xstorm_conn_buffer xstorm_conn_buffer;
+	struct l5cm_tstorm_conn_buffer tstorm_conn_buffer;
+};
+
+/*
+ * l5cm slow path element
+ */
+struct l5cm_packet_size {
+	u32 size;
+	u32 rsrv;
+};
+
+/*
+ * l5cm connection parameters
+ */
+union l5cm_reduce_param_union {
+	u32 passive_side_scramble_key;
+	u32 pcs_id;
+};
+
+/*
+ * l5cm connection parameters
+ */
+struct l5cm_reduce_conn {
+	union l5cm_reduce_param_union param;
+	u32 isn;
+};
+
+/*
+ * l5cm slow path element
+ */
+union l5cm_specific_data {
+	u8 protocol_data[8];
+	struct regpair phy_address;
+	struct l5cm_packet_size packet_size;
+	struct l5cm_reduce_conn reduced_conn;
+};
+
+/*
+ * l5 slow path element
+ */
+struct l5cm_spe {
+	struct spe_hdr hdr;
+	union l5cm_specific_data data;
+};
+
+/*
+ * Tstorm Tcp flags
+ */
+struct tstorm_l5cm_tcp_flags {
+	u16 flags;
+#define TSTORM_L5CM_TCP_FLAGS_VLAN_ID (0xFFF<<0)
+#define TSTORM_L5CM_TCP_FLAGS_VLAN_ID_SHIFT 0
+#define TSTORM_L5CM_TCP_FLAGS_RSRV0 (0x1<<12)
+#define TSTORM_L5CM_TCP_FLAGS_RSRV0_SHIFT 12
+#define TSTORM_L5CM_TCP_FLAGS_TS_ENABLED (0x1<<13)
+#define TSTORM_L5CM_TCP_FLAGS_TS_ENABLED_SHIFT 13
+#define TSTORM_L5CM_TCP_FLAGS_RSRV1 (0x3<<14)
+#define TSTORM_L5CM_TCP_FLAGS_RSRV1_SHIFT 14
+};
+
+/*
+ * Xstorm Tcp flags
+ */
+struct xstorm_l5cm_tcp_flags {
+	u8 flags;
+#define XSTORM_L5CM_TCP_FLAGS_ENC_ENABLED (0x1<<0)
+#define XSTORM_L5CM_TCP_FLAGS_ENC_ENABLED_SHIFT 0
+#define XSTORM_L5CM_TCP_FLAGS_TS_ENABLED (0x1<<1)
+#define XSTORM_L5CM_TCP_FLAGS_TS_ENABLED_SHIFT 1
+#define XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN (0x1<<2)
+#define XSTORM_L5CM_TCP_FLAGS_WND_SCL_EN_SHIFT 2
+#define XSTORM_L5CM_TCP_FLAGS_RSRV (0x1F<<3)
+#define XSTORM_L5CM_TCP_FLAGS_RSRV_SHIFT 3
+};
+
 #endif /* CNIC_DEFS_H */
diff --git a/drivers/net/cnic_if.h b/drivers/net/cnic_if.h
index d8b09ef..8aaf98b 100644
--- a/drivers/net/cnic_if.h
+++ b/drivers/net/cnic_if.h
@@ -12,8 +12,8 @@
 #ifndef CNIC_IF_H
 #define CNIC_IF_H
 
-#define CNIC_MODULE_VERSION	"2.0.1"
-#define CNIC_MODULE_RELDATE	"Oct 01, 2009"
+#define CNIC_MODULE_VERSION	"2.1.0"
+#define CNIC_MODULE_RELDATE	"Oct 10, 2009"
 
 #define CNIC_ULP_RDMA		0
 #define CNIC_ULP_ISCSI		1
@@ -81,6 +81,8 @@
 #define DRV_CTL_CTX_WR_CMD		0x103
 #define DRV_CTL_CTXTBL_WR_CMD		0x104
 #define DRV_CTL_COMPLETION_CMD		0x105
+#define DRV_CTL_START_L2_CMD		0x106
+#define DRV_CTL_STOP_L2_CMD		0x107
 
 struct cnic_ctl_completion {
 	u32	cid;
@@ -105,11 +107,17 @@
 	dma_addr_t	dma_addr;
 };
 
+struct drv_ctl_l2_ring {
+	u32		client_id;
+	u32		cid;
+};
+
 struct drv_ctl_info {
 	int	cmd;
 	union {
 		struct drv_ctl_completion comp;
 		struct drv_ctl_io io;
+		struct drv_ctl_l2_ring ring;
 		char bytes[MAX_DRV_CTL_DATA];
 	} data;
 };
@@ -143,6 +151,7 @@
 	u32		max_kwqe_pending;
 	struct pci_dev	*pdev;
 	void __iomem	*io_base;
+	void __iomem	*io_base2;
 
 	u32		ctx_tbl_offset;
 	u32		ctx_tbl_len;
@@ -298,5 +307,6 @@
 extern int cnic_unregister_driver(int ulp_type);
 
 extern struct cnic_eth_dev *bnx2_cnic_probe(struct net_device *dev);
+extern struct cnic_eth_dev *bnx2x_cnic_probe(struct net_device *dev);
 
 #endif
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 61f9da2..6782223 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -380,9 +380,8 @@
 		return NULL;
 	}
 
-	skb = netdev_alloc_skb(priv->dev, CPMAC_SKB_SIZE);
+	skb = netdev_alloc_skb_ip_align(priv->dev, CPMAC_SKB_SIZE);
 	if (likely(skb)) {
-		skb_reserve(skb, 2);
 		skb_put(desc->skb, desc->datalen);
 		desc->skb->protocol = eth_type_trans(desc->skb, priv->dev);
 		desc->skb->ip_summed = CHECKSUM_NONE;
@@ -991,12 +990,11 @@
 
 	priv->rx_head = &priv->desc_ring[CPMAC_QUEUES];
 	for (i = 0, desc = priv->rx_head; i < priv->ring_size; i++, desc++) {
-		skb = netdev_alloc_skb(dev, CPMAC_SKB_SIZE);
+		skb = netdev_alloc_skb_ip_align(dev, CPMAC_SKB_SIZE);
 		if (unlikely(!skb)) {
 			res = -ENOMEM;
 			goto fail_desc;
 		}
-		skb_reserve(skb, 2);
 		desc->skb = skb;
 		desc->data_mapping = dma_map_single(&dev->dev, skb->data,
 						    CPMAC_SKB_SIZE,
diff --git a/drivers/net/cris/eth_v10.c b/drivers/net/cris/eth_v10.c
index 15c0195..a24be34 100644
--- a/drivers/net/cris/eth_v10.c
+++ b/drivers/net/cris/eth_v10.c
@@ -768,10 +768,24 @@
 
 	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_ADVERTISE, data);
 
-	/* Renegotiate with link partner */
+	data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
 	if (autoneg_normal) {
-	  data = e100_get_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR);
-	data |= BMCR_ANENABLE | BMCR_ANRESTART;
+		/* Renegotiate with link partner */
+		data |= BMCR_ANENABLE | BMCR_ANRESTART;
+	} else {
+		/* Don't negotiate speed or duplex */
+		data &= ~(BMCR_ANENABLE | BMCR_ANRESTART);
+
+		/* Set speed and duplex static */
+		if (current_speed_selection == 10)
+			data &= ~BMCR_SPEED100;
+		else
+			data |= BMCR_SPEED100;
+
+		if (current_duplex != full)
+			data &= ~BMCR_FULLDPLX;
+		else
+			data |= BMCR_FULLDPLX;
 	}
 	e100_set_mdio_reg(dev, np->mii_if.phy_id, MII_BMCR, data);
 }
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 2b1aea6..3e8618b 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -48,12 +48,27 @@
 struct vlan_group;
 struct adapter;
 struct sge_qset;
+struct port_info;
 
 enum {			/* rx_offload flags */
 	T3_RX_CSUM	= 1 << 0,
 	T3_LRO		= 1 << 1,
 };
 
+enum mac_idx_types {
+	LAN_MAC_IDX	= 0,
+	SAN_MAC_IDX,
+
+	MAX_MAC_IDX
+};
+
+struct iscsi_config {
+	__u8	mac_addr[ETH_ALEN];
+	__u32	flags;
+	int (*send)(struct port_info *pi, struct sk_buff **skb);
+	int (*recv)(struct port_info *pi, struct sk_buff *skb);
+};
+
 struct port_info {
 	struct adapter *adapter;
 	struct vlan_group *vlan_grp;
@@ -68,6 +83,7 @@
 	struct net_device_stats netstats;
 	int activity;
 	__be32 iscsi_ipv4addr;
+	struct iscsi_config iscsic;
 
 	int link_fault; /* link fault was detected */
 };
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index 34e776c..c9113d3 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -344,8 +344,10 @@
 
 	init_rx_mode(&rm, dev, dev->mc_list);
 	t3_mac_reset(mac);
+	t3_mac_set_num_ucast(mac, MAX_MAC_IDX);
 	t3_mac_set_mtu(mac, dev->mtu);
-	t3_mac_set_address(mac, 0, dev->dev_addr);
+	t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr);
+	t3_mac_set_address(mac, SAN_MAC_IDX, pi->iscsic.mac_addr);
 	t3_mac_set_rx_mode(mac, &rm);
 	t3_link_start(&pi->phy, mac, &pi->link_config);
 	t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
@@ -903,6 +905,7 @@
 static int write_smt_entry(struct adapter *adapter, int idx)
 {
 	struct cpl_smt_write_req *req;
+	struct port_info *pi = netdev_priv(adapter->port[idx]);
 	struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL);
 
 	if (!skb)
@@ -913,8 +916,8 @@
 	OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx));
 	req->mtu_idx = NMTUS - 1;	/* should be 0 but there's a T3 bug */
 	req->iff = idx;
-	memset(req->src_mac1, 0, sizeof(req->src_mac1));
 	memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN);
+	memcpy(req->src_mac1, pi->iscsic.mac_addr, ETH_ALEN);
 	skb->priority = 1;
 	offload_tx(&adapter->tdev, skb);
 	return 0;
@@ -2516,7 +2519,7 @@
 		return -EINVAL;
 
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-	t3_mac_set_address(&pi->mac, 0, dev->dev_addr);
+	t3_mac_set_address(&pi->mac, LAN_MAC_IDX, dev->dev_addr);
 	if (offload_running(adapter))
 		write_smt_entry(adapter, pi->port_id);
 	return 0;
@@ -2654,7 +2657,7 @@
 			struct cmac *mac = &p->mac;
 
 			t3_mac_set_mtu(mac, dev->mtu);
-			t3_mac_set_address(mac, 0, dev->dev_addr);
+			t3_mac_set_address(mac, LAN_MAC_IDX, dev->dev_addr);
 			cxgb_set_rxmode(dev);
 			t3_link_start(&p->phy, mac, &p->link_config);
 			t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
@@ -3112,6 +3115,14 @@
 #endif
 };
 
+static void __devinit cxgb3_init_iscsi_mac(struct net_device *dev)
+{
+	struct port_info *pi = netdev_priv(dev);
+
+	memcpy(pi->iscsic.mac_addr, dev->dev_addr, ETH_ALEN);
+	pi->iscsic.mac_addr[3] |= 0x80;
+}
+
 static int __devinit init_one(struct pci_dev *pdev,
 			      const struct pci_device_id *ent)
 {
@@ -3270,6 +3281,9 @@
 		goto out_free_dev;
 	}
 
+	for_each_port(adapter, i)
+		cxgb3_init_iscsi_mac(adapter->port[i]);
+
 	/* Driver's ready. Reflect it on LEDs */
 	t3_led_ready(adapter);
 
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index f866128..cf2e1d3 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -1260,7 +1260,7 @@
 		if (should_restart_tx(q) &&
 		    test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
 			q->restarts++;
-			netif_tx_wake_queue(txq);
+			netif_tx_start_queue(txq);
 		}
 	}
 
@@ -1946,10 +1946,9 @@
  *	Check if the ARP request is probing the private IP address
  *	dedicated to iSCSI, generate an ARP reply if so.
  */
-static void cxgb3_arp_process(struct adapter *adapter, struct sk_buff *skb)
+static void cxgb3_arp_process(struct port_info *pi, struct sk_buff *skb)
 {
 	struct net_device *dev = skb->dev;
-	struct port_info *pi;
 	struct arphdr *arp;
 	unsigned char *arp_ptr;
 	unsigned char *sha;
@@ -1972,12 +1971,11 @@
 	arp_ptr += dev->addr_len;
 	memcpy(&tip, arp_ptr, sizeof(tip));
 
-	pi = netdev_priv(dev);
 	if (tip != pi->iscsi_ipv4addr)
 		return;
 
 	arp_send(ARPOP_REPLY, ETH_P_ARP, sip, dev, tip, sha,
-		 dev->dev_addr, sha);
+		 pi->iscsic.mac_addr, sha);
 
 }
 
@@ -1986,6 +1984,19 @@
 	return skb->protocol == htons(ETH_P_ARP);
 }
 
+static void cxgb3_process_iscsi_prov_pack(struct port_info *pi,
+					struct sk_buff *skb)
+{
+	if (is_arp(skb)) {
+		cxgb3_arp_process(pi, skb);
+		return;
+	}
+
+	if (pi->iscsic.recv)
+		pi->iscsic.recv(pi, skb);
+
+}
+
 /**
  *	rx_eth - process an ingress ethernet packet
  *	@adap: the adapter
@@ -2024,13 +2035,12 @@
 				vlan_gro_receive(&qs->napi, grp,
 						 ntohs(p->vlan), skb);
 			else {
-				if (unlikely(pi->iscsi_ipv4addr &&
-				    is_arp(skb))) {
+				if (unlikely(pi->iscsic.flags)) {
 					unsigned short vtag = ntohs(p->vlan) &
 								VLAN_VID_MASK;
 					skb->dev = vlan_group_get_device(grp,
 									 vtag);
-					cxgb3_arp_process(adap, skb);
+					cxgb3_process_iscsi_prov_pack(pi, skb);
 				}
 				__vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
 					  	  rq->polling);
@@ -2041,8 +2051,8 @@
 		if (lro)
 			napi_gro_receive(&qs->napi, skb);
 		else {
-			if (unlikely(pi->iscsi_ipv4addr && is_arp(skb)))
-				cxgb3_arp_process(adap, skb);
+			if (unlikely(pi->iscsic.flags))
+				cxgb3_process_iscsi_prov_pack(pi, skb);
 			netif_receive_skb(skb);
 		}
 	} else
@@ -2125,6 +2135,7 @@
 	if (!complete)
 		return;
 
+	skb_record_rx_queue(skb, qs - &adap->sge.qs[0]);
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 	cpl = qs->lro_va;
 
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index 3179521..79ce8e8 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -164,16 +164,14 @@
 # define EMAC_MBP_MCASTCHAN(ch)		((ch) & 0x7)
 
 /* EMAC mac_control register */
-#define EMAC_MACCONTROL_TXPTYPE		(0x200)
-#define EMAC_MACCONTROL_TXPACEEN	(0x40)
-#define EMAC_MACCONTROL_MIIEN		(0x20)
-#define EMAC_MACCONTROL_GIGABITEN	(0x80)
-#define EMAC_MACCONTROL_GIGABITEN_SHIFT (7)
-#define EMAC_MACCONTROL_FULLDUPLEXEN	(0x1)
+#define EMAC_MACCONTROL_TXPTYPE		BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN	BIT(6)
+#define EMAC_MACCONTROL_GMIIEN		BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN	BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN	BIT(0)
 #define EMAC_MACCONTROL_RMIISPEED_MASK	BIT(15)
 
 /* GIGABIT MODE related bits */
-#define EMAC_DM646X_MACCONTORL_GMIIEN	BIT(5)
 #define EMAC_DM646X_MACCONTORL_GIG	BIT(7)
 #define EMAC_DM646X_MACCONTORL_GIGFORCE	BIT(17)
 
@@ -192,10 +190,10 @@
 #define EMAC_RX_BUFFER_OFFSET_MASK	(0xFFFF)
 
 /* MAC_IN_VECTOR (0x180) register bit fields */
-#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	      (0x20000)
-#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	      (0x10000)
-#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	      (0x0100)
-#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	      (0x01)
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT	BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT	BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC	BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC	BIT(0)
 
 /** NOTE:: For DM646x the IN_VECTOR has changed */
 #define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC	BIT(EMAC_DEF_RX_CH)
@@ -203,7 +201,6 @@
 #define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT	BIT(26)
 #define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT	BIT(27)
 
-
 /* CPPI bit positions */
 #define EMAC_CPPI_SOP_BIT		BIT(31)
 #define EMAC_CPPI_EOP_BIT		BIT(30)
@@ -750,8 +747,7 @@
 
 	if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
 		mac_control = emac_read(EMAC_MACCONTROL);
-		mac_control |= (EMAC_DM646X_MACCONTORL_GMIIEN |
-				EMAC_DM646X_MACCONTORL_GIG |
+		mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
 				EMAC_DM646X_MACCONTORL_GIGFORCE);
 	} else {
 		/* Clear the GIG bit and GIGFORCE bit */
@@ -2108,7 +2104,7 @@
 
 	/* Enable MII */
 	val = emac_read(EMAC_MACCONTROL);
-	val |= (EMAC_MACCONTROL_MIIEN);
+	val |= (EMAC_MACCONTROL_GMIIEN);
 	emac_write(EMAC_MACCONTROL, val);
 
 	/* Enable NAPI and interrupts */
@@ -2810,11 +2806,33 @@
 	return 0;
 }
 
+static
+int davinci_emac_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (netif_running(dev))
+		emac_dev_stop(dev);
+
+	clk_disable(emac_clk);
+
+	return 0;
+}
+
+static int davinci_emac_resume(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	clk_enable(emac_clk);
+
+	if (netif_running(dev))
+		emac_dev_open(dev);
+
+	return 0;
+}
+
 /**
  * davinci_emac_driver: EMAC platform driver structure
- *
- * We implement only probe and remove functions - suspend/resume and
- * others not supported by this module
  */
 static struct platform_driver davinci_emac_driver = {
 	.driver = {
@@ -2823,6 +2841,8 @@
 	},
 	.probe = davinci_emac_probe,
 	.remove = __devexit_p(davinci_emac_remove),
+	.suspend = davinci_emac_suspend,
+	.resume = davinci_emac_resume,
 };
 
 /**
diff --git a/drivers/net/dl2k.c b/drivers/net/dl2k.c
index 7fa7a90..ce8fef1 100644
--- a/drivers/net/dl2k.c
+++ b/drivers/net/dl2k.c
@@ -505,7 +505,8 @@
 			entry = np->old_rx % RX_RING_SIZE;
 			/* Dropped packets don't need to re-allocate */
 			if (np->rx_skbuff[entry] == NULL) {
-				skb = netdev_alloc_skb (dev, np->rx_buf_sz);
+				skb = netdev_alloc_skb_ip_align(dev,
+								np->rx_buf_sz);
 				if (skb == NULL) {
 					np->rx_ring[entry].fraginfo = 0;
 					printk (KERN_INFO
@@ -514,8 +515,6 @@
 					break;
 				}
 				np->rx_skbuff[entry] = skb;
-				/* 16 byte align the IP header */
-				skb_reserve (skb, 2);
 				np->rx_ring[entry].fraginfo =
 				    cpu_to_le64 (pci_map_single
 					 (np->pdev, skb->data, np->rx_buf_sz,
@@ -576,7 +575,9 @@
 	/* Allocate the rx buffers */
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		/* Allocated fixed size of skbuff */
-		struct sk_buff *skb = netdev_alloc_skb (dev, np->rx_buf_sz);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz);
 		np->rx_skbuff[i] = skb;
 		if (skb == NULL) {
 			printk (KERN_ERR
@@ -584,7 +585,6 @@
 				dev->name);
 			break;
 		}
-		skb_reserve (skb, 2);	/* 16 byte align the IP header. */
 		/* Rubicon now supports 40 bits of addressing space. */
 		np->rx_ring[i].fraginfo =
 		    cpu_to_le64 ( pci_map_single (
@@ -871,13 +871,11 @@
 						  PCI_DMA_FROMDEVICE);
 				skb_put (skb = np->rx_skbuff[entry], pkt_len);
 				np->rx_skbuff[entry] = NULL;
-			} else if ((skb = netdev_alloc_skb(dev, pkt_len + 2))) {
+			} else if ((skb = netdev_alloc_skb_ip_align(dev, pkt_len))) {
 				pci_dma_sync_single_for_cpu(np->pdev,
 							    desc_to_dma(desc),
 							    np->rx_buf_sz,
 							    PCI_DMA_FROMDEVICE);
-				/* 16 byte align the IP header */
-				skb_reserve (skb, 2);
 				skb_copy_to_linear_data (skb,
 						  np->rx_skbuff[entry]->data,
 						  pkt_len);
@@ -907,7 +905,7 @@
 		struct sk_buff *skb;
 		/* Dropped packets don't need to re-allocate */
 		if (np->rx_skbuff[entry] == NULL) {
-			skb = netdev_alloc_skb(dev, np->rx_buf_sz);
+			skb = netdev_alloc_skb_ip_align(dev, np->rx_buf_sz);
 			if (skb == NULL) {
 				np->rx_ring[entry].fraginfo = 0;
 				printk (KERN_INFO
@@ -917,8 +915,6 @@
 				break;
 			}
 			np->rx_skbuff[entry] = skb;
-			/* 16 byte align the IP header */
-			skb_reserve (skb, 2);
 			np->rx_ring[entry].fraginfo =
 			    cpu_to_le64 (pci_map_single
 					 (np->pdev, skb->data, np->rx_buf_sz,
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index d19b084..7462fdf 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -621,6 +621,7 @@
 	u16 eeprom_wc;
 	__le16 eeprom[256];
 	spinlock_t mdio_lock;
+	const struct firmware *fw;
 };
 
 static inline void e100_write_flush(struct nic *nic)
@@ -1222,9 +1223,9 @@
 static const struct firmware *e100_request_firmware(struct nic *nic)
 {
 	const char *fw_name;
-	const struct firmware *fw;
+	const struct firmware *fw = nic->fw;
 	u8 timer, bundle, min_size;
-	int err;
+	int err = 0;
 
 	/* do not load u-code for ICH devices */
 	if (nic->flags & ich)
@@ -1240,12 +1241,20 @@
 	else /* No ucode on other devices */
 		return NULL;
 
-	err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+	/* If the firmware has not previously been loaded, request a pointer
+	 * to it. If it was previously loaded, we are reinitializing the
+	 * adapter, possibly in a resume from hibernate, in which case
+	 * request_firmware() cannot be used.
+	 */
+	if (!fw)
+		err = request_firmware(&fw, fw_name, &nic->pdev->dev);
+
 	if (err) {
 		DPRINTK(PROBE, ERR, "Failed to load firmware \"%s\": %d\n",
 			fw_name, err);
 		return ERR_PTR(err);
 	}
+
 	/* Firmware should be precisely UCODE_SIZE (words) plus three bytes
 	   indicating the offsets for BUNDLESMALL, BUNDLEMAX, INTDELAY */
 	if (fw->size != UCODE_SIZE * 4 + 3) {
@@ -1268,7 +1277,10 @@
 		release_firmware(fw);
 		return ERR_PTR(-EINVAL);
 	}
-	/* OK, firmware is validated and ready to use... */
+
+	/* OK, firmware is validated and ready to use. Save a pointer
+	 * to it in the nic */
+	nic->fw = fw;
 	return fw;
 }
 
@@ -1851,11 +1863,10 @@
 #define RFD_BUF_LEN (sizeof(struct rfd) + VLAN_ETH_FRAME_LEN)
 static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx)
 {
-	if (!(rx->skb = netdev_alloc_skb(nic->netdev, RFD_BUF_LEN + NET_IP_ALIGN)))
+	if (!(rx->skb = netdev_alloc_skb_ip_align(nic->netdev, RFD_BUF_LEN)))
 		return -ENOMEM;
 
-	/* Align, init, and map the RFD. */
-	skb_reserve(rx->skb, NET_IP_ALIGN);
+	/* Init, and map the RFD. */
 	skb_copy_to_linear_data(rx->skb, &nic->blank_rfd, sizeof(struct rfd));
 	rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data,
 		RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL);
diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 42e2b7e..a566528 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -302,7 +302,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c
index 490b2b7..ffbae0a 100644
--- a/drivers/net/e1000/e1000_ethtool.c
+++ b/drivers/net/e1000/e1000_ethtool.c
@@ -31,14 +31,22 @@
 #include "e1000.h"
 #include <asm/uaccess.h>
 
+enum {NETDEV_STATS, E1000_STATS};
+
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define E1000_STAT(m) FIELD_SIZEOF(struct e1000_adapter, m), \
-		      offsetof(struct e1000_adapter, m)
+#define E1000_STAT(m)		E1000_STATS, \
+				sizeof(((struct e1000_adapter *)0)->m), \
+		      		offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_packets", E1000_STAT(stats.gprc) },
 	{ "tx_packets", E1000_STAT(stats.gptc) },
@@ -50,19 +58,19 @@
 	{ "tx_multicast", E1000_STAT(stats.mptc) },
 	{ "rx_errors", E1000_STAT(stats.rxerrc) },
 	{ "tx_errors", E1000_STAT(stats.txerrc) },
-	{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", E1000_STAT(stats.mprc) },
 	{ "collisions", E1000_STAT(stats.colc) },
 	{ "rx_length_errors", E1000_STAT(stats.rlerrc) },
-	{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
 	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", E1000_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
 	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
@@ -1830,10 +1838,21 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	e1000_update_stats(adapter);
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *) adapter +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index bcd192c..c938114 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3101,10 +3101,8 @@
 
 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -3196,6 +3194,7 @@
 
 void e1000_update_stats(struct e1000_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	unsigned long flags;
@@ -3288,32 +3287,32 @@
 	}
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
 	/* RLEC on some newer hardware can be incorrect so build
 	* our own version based on RUC and ROC */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
 	adapter->stats.rlerrc = adapter->stats.ruc + adapter->stats.roc;
-	adapter->net_stats.rx_length_errors = adapter->stats.rlerrc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_length_errors = adapter->stats.rlerrc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
 	adapter->stats.txerrc = adapter->stats.ecol + adapter->stats.latecol;
-	adapter->net_stats.tx_errors = adapter->stats.txerrc;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_errors = adapter->stats.txerrc;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 	if (hw->bad_tx_carr_stats_fd &&
 	    adapter->link_duplex == FULL_DUPLEX) {
-		adapter->net_stats.tx_carrier_errors = 0;
+		netdev->stats.tx_carrier_errors = 0;
 		adapter->stats.tncrs = 0;
 	}
 
@@ -3514,8 +3513,8 @@
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
-	adapter->net_stats.tx_bytes += total_tx_bytes;
-	adapter->net_stats.tx_packets += total_tx_packets;
+	netdev->stats.tx_bytes += total_tx_bytes;
+	netdev->stats.tx_packets += total_tx_packets;
 	return (count < tx_ring->count);
 }
 
@@ -3767,8 +3766,8 @@
 
 	adapter->total_rx_packets += total_rx_packets;
 	adapter->total_rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -3867,9 +3866,8 @@
 		 * of reassembly being done in the stack */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -3916,8 +3914,8 @@
 
 	adapter->total_rx_packets += total_rx_packets;
 	adapter->total_rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -3938,9 +3936,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 -
-	                     16 /*for skb_reserve */ -
-	                     NET_IP_ALIGN;
+	unsigned int bufsz = 256 - 16 /*for skb_reserve */ ;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -3952,7 +3948,7 @@
 			goto check_page;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -3965,7 +3961,7 @@
 			DPRINTK(PROBE, ERR, "skb align check failed: %u bytes "
 					     "at %p\n", bufsz, skb->data);
 			/* Try again, without freeing the previous */
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			/* Failed allocation, critical failure */
 			if (!skb) {
 				dev_kfree_skb(oldskb);
@@ -3983,12 +3979,6 @@
 			/* Use new allocation */
 			dev_kfree_skb(oldskb);
 		}
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 check_page:
@@ -4045,7 +4035,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+	unsigned int bufsz = adapter->rx_buffer_len;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -4057,7 +4047,7 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
@@ -4070,7 +4060,7 @@
 			DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes "
 					     "at %p\n", bufsz, skb->data);
 			/* Try again, without freeing the previous */
-			skb = netdev_alloc_skb(netdev, bufsz);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			/* Failed allocation, critical failure */
 			if (!skb) {
 				dev_kfree_skb(oldskb);
@@ -4089,12 +4079,6 @@
 			/* Use new allocation */
 			dev_kfree_skb(oldskb);
 		}
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h
index 189dfa2..00989c5 100644
--- a/drivers/net/e1000e/e1000.h
+++ b/drivers/net/e1000e/e1000.h
@@ -329,7 +329,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in e1000_hw.h */
 	struct e1000_hw hw;
diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c
index 1bf4d2a..0364b91 100644
--- a/drivers/net/e1000e/ethtool.c
+++ b/drivers/net/e1000e/ethtool.c
@@ -35,14 +35,22 @@
 
 #include "e1000.h"
 
+enum {NETDEV_STATS, E1000_STATS};
+
 struct e1000_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define E1000_STAT(m) sizeof(((struct e1000_adapter *)0)->m), \
-		      offsetof(struct e1000_adapter, m)
+#define E1000_STAT(m)		E1000_STATS, \
+				sizeof(((struct e1000_adapter *)0)->m), \
+		      		offsetof(struct e1000_adapter, m)
+#define E1000_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static const struct e1000_stats e1000_gstrings_stats[] = {
 	{ "rx_packets", E1000_STAT(stats.gprc) },
 	{ "tx_packets", E1000_STAT(stats.gptc) },
@@ -52,21 +60,21 @@
 	{ "tx_broadcast", E1000_STAT(stats.bptc) },
 	{ "rx_multicast", E1000_STAT(stats.mprc) },
 	{ "tx_multicast", E1000_STAT(stats.mptc) },
-	{ "rx_errors", E1000_STAT(net_stats.rx_errors) },
-	{ "tx_errors", E1000_STAT(net_stats.tx_errors) },
-	{ "tx_dropped", E1000_STAT(net_stats.tx_dropped) },
+	{ "rx_errors", E1000_NETDEV_STAT(stats.rx_errors) },
+	{ "tx_errors", E1000_NETDEV_STAT(stats.tx_errors) },
+	{ "tx_dropped", E1000_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", E1000_STAT(stats.mprc) },
 	{ "collisions", E1000_STAT(stats.colc) },
-	{ "rx_length_errors", E1000_STAT(net_stats.rx_length_errors) },
-	{ "rx_over_errors", E1000_STAT(net_stats.rx_over_errors) },
+	{ "rx_length_errors", E1000_NETDEV_STAT(stats.rx_length_errors) },
+	{ "rx_over_errors", E1000_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", E1000_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", E1000_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", E1000_STAT(stats.rnbc) },
 	{ "rx_missed_errors", E1000_STAT(stats.mpc) },
 	{ "tx_aborted_errors", E1000_STAT(stats.ecol) },
 	{ "tx_carrier_errors", E1000_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", E1000_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", E1000_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", E1000_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", E1000_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", E1000_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", E1000_STAT(stats.latecol) },
 	{ "tx_deferred_ok", E1000_STAT(stats.dc) },
@@ -327,10 +335,18 @@
 
 		hw->fc.current_mode = hw->fc.requested_mode;
 
-		retval = ((hw->phy.media_type == e1000_media_type_fiber) ?
-			  hw->mac.ops.setup_link(hw) : e1000e_force_mac_fc(hw));
+		if (hw->phy.media_type == e1000_media_type_fiber) {
+			retval = hw->mac.ops.setup_link(hw);
+			/* implicit goto out */
+		} else {
+			retval = e1000e_force_mac_fc(hw);
+			if (retval)
+				goto out;
+			e1000e_set_fc_watermarks(hw);
+		}
 	}
 
+out:
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
@@ -1904,10 +1920,21 @@
 {
 	struct e1000_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	e1000e_update_stats(adapter);
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+e1000_gstrings_stats[i].stat_offset;
+		switch (e1000_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		case E1000_STATS:
+			p = (char *) adapter +
+					e1000_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (e1000_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 0687c6a..3769248 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -167,7 +167,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
+	unsigned int bufsz = adapter->rx_buffer_len;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -179,20 +179,13 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (!skb) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 map_skb:
 		buffer_info->dma = pci_map_single(pdev, skb->data,
@@ -284,21 +277,14 @@
 			     cpu_to_le64(ps_page->dma);
 		}
 
-		skb = netdev_alloc_skb(netdev,
-				       adapter->rx_ps_bsize0 + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(netdev,
+						adapter->rx_ps_bsize0);
 
 		if (!skb) {
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/*
-		 * Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->dma = pci_map_single(pdev, skb->data,
 						  adapter->rx_ps_bsize0,
@@ -359,9 +345,7 @@
 	struct e1000_buffer *buffer_info;
 	struct sk_buff *skb;
 	unsigned int i;
-	unsigned int bufsz = 256 -
-	                     16 /* for skb_reserve */ -
-	                     NET_IP_ALIGN;
+	unsigned int bufsz = 256 - 16 /* for skb_reserve */;
 
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -373,19 +357,13 @@
 			goto check_page;
 		}
 
-		skb = netdev_alloc_skb(netdev, bufsz);
+		skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 check_page:
 		/* allocate a new page if necessary */
@@ -513,9 +491,8 @@
 		 */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -560,8 +537,8 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -690,8 +667,8 @@
 	}
 	adapter->total_tx_bytes += total_tx_bytes;
 	adapter->total_tx_packets += total_tx_packets;
-	adapter->net_stats.tx_bytes += total_tx_bytes;
-	adapter->net_stats.tx_packets += total_tx_packets;
+	netdev->stats.tx_bytes += total_tx_bytes;
+	netdev->stats.tx_packets += total_tx_packets;
 	return (count < tx_ring->count);
 }
 
@@ -871,8 +848,8 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -1051,8 +1028,8 @@
 
 	adapter->total_rx_bytes += total_rx_bytes;
 	adapter->total_rx_packets += total_rx_packets;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 	return cleaned;
 }
 
@@ -3287,6 +3264,7 @@
  **/
 void e1000e_update_stats(struct e1000_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
 	u16 phy_data;
@@ -3381,8 +3359,8 @@
 	adapter->stats.tsctfc += er32(TSCTFC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
@@ -3390,22 +3368,22 @@
 	 * RLEC on some newer hardware can be incorrect so build
 	 * our own version based on RUC and ROC
 	 */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
-	adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+	netdev->stats.rx_length_errors = adapter->stats.ruc +
 					      adapter->stats.roc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
-	adapter->net_stats.tx_errors = adapter->stats.ecol +
+	netdev->stats.tx_errors = adapter->stats.ecol +
 				       adapter->stats.latecol;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
@@ -4254,10 +4232,8 @@
  **/
 static struct net_device_stats *e1000_get_stats(struct net_device *netdev)
 {
-	struct e1000_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 41bd7ae..7f8fcc2 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -447,7 +447,9 @@
 	max_index_mask = q_skba->len - 1;
 	for (i = 0; i < fill_wqes; i++) {
 		u64 tmp_addr;
-		struct sk_buff *skb = netdev_alloc_skb(dev, packet_size);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, packet_size);
 		if (!skb) {
 			q_skba->os_skbs = fill_wqes - i;
 			if (q_skba->os_skbs == q_skba->len - 2) {
@@ -457,7 +459,6 @@
 			}
 			break;
 		}
-		skb_reserve(skb, NET_IP_ALIGN);
 
 		skb_arr[index] = skb;
 		tmp_addr = ehea_map_vaddr(skb->data);
@@ -500,7 +501,7 @@
 {
 	return ehea_refill_rq_def(pr, &pr->rq2_skba, 2,
 				  nr_of_wqes, EHEA_RWQE2_TYPE,
-				  EHEA_RQ2_PKT_SIZE + NET_IP_ALIGN);
+				  EHEA_RQ2_PKT_SIZE);
 }
 
 
@@ -508,7 +509,7 @@
 {
 	return ehea_refill_rq_def(pr, &pr->rq3_skba, 3,
 				  nr_of_wqes, EHEA_RWQE3_TYPE,
-				  EHEA_MAX_PACKET_SIZE + NET_IP_ALIGN);
+				  EHEA_MAX_PACKET_SIZE);
 }
 
 static inline int ehea_check_cqe(struct ehea_cqe *cqe, int *rq_num)
diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index d69d52e..f875751 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -870,19 +870,6 @@
 	dev_kfree_skb_any(buf->os_buf);
 }
 
-static inline struct sk_buff *enic_rq_alloc_skb(struct net_device *netdev,
-	unsigned int size)
-{
-	struct sk_buff *skb;
-
-	skb = netdev_alloc_skb(netdev, size + NET_IP_ALIGN);
-
-	if (skb)
-		skb_reserve(skb, NET_IP_ALIGN);
-
-	return skb;
-}
-
 static int enic_rq_alloc_buf(struct vnic_rq *rq)
 {
 	struct enic *enic = vnic_dev_priv(rq->vdev);
@@ -892,7 +879,7 @@
 	unsigned int os_buf_index = 0;
 	dma_addr_t dma_addr;
 
-	skb = enic_rq_alloc_skb(netdev, len);
+	skb = netdev_alloc_skb_ip_align(netdev, len);
 	if (!skb)
 		return -ENOMEM;
 
diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 590473a..f1c5652 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -405,10 +405,10 @@
 
 		if (ethoc_update_rx_stats(priv, &bd) == 0) {
 			int size = bd.stat >> 16;
-			struct sk_buff *skb = netdev_alloc_skb(dev, size);
+			struct sk_buff *skb;
 
 			size -= 4; /* strip the CRC */
-			skb_reserve(skb, 2); /* align TCP/IP header */
+			skb = netdev_alloc_skb_ip_align(dev, size);
 
 			if (likely(skb)) {
 				void *src = phys_to_virt(bd.addr);
diff --git a/drivers/net/fsl_pq_mdio.c b/drivers/net/fsl_pq_mdio.c
index 6ac4648..4065b7c 100644
--- a/drivers/net/fsl_pq_mdio.c
+++ b/drivers/net/fsl_pq_mdio.c
@@ -3,8 +3,9 @@
  * Provides Bus interface for MIIM regs
  *
  * Author: Andy Fleming <afleming@freescale.com>
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
  *
  * Based on gianfar_mii.c and ucc_geth_mii.c (Li Yang, Kim Phillips)
  *
@@ -189,19 +190,29 @@
 
 
 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
-static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs)
+static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
 {
 	struct gfar __iomem *enet_regs;
+	u32 __iomem *ioremap_tbipa;
+	u64 addr, size;
 
 	/*
 	 * This is mildly evil, but so is our hardware for doing this.
 	 * Also, we have to cast back to struct gfar because of
 	 * definition weirdness done in gianfar.h.
 	 */
-	enet_regs = (struct gfar __iomem *)
-		((char __iomem *)regs - offsetof(struct gfar, gfar_mii_regs));
-
-	return &enet_regs->tbipa;
+	if(of_device_is_compatible(np, "fsl,gianfar-mdio") ||
+		of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+		of_device_is_compatible(np, "gianfar")) {
+		enet_regs = (struct gfar __iomem *)regs;
+		return &enet_regs->tbipa;
+	} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi")) {
+		addr = of_translate_address(np, of_get_address(np, 1, &size, NULL));
+		ioremap_tbipa = ioremap(addr, size);
+		return ioremap_tbipa;
+	} else
+		return NULL;
 }
 #endif
 
@@ -250,11 +261,11 @@
 {
 	struct device_node *np = ofdev->node;
 	struct device_node *tbi;
-	struct fsl_pq_mdio __iomem *regs;
+	struct fsl_pq_mdio __iomem *regs = NULL;
 	u32 __iomem *tbipa;
 	struct mii_bus *new_bus;
 	int tbiaddr = -1;
-	u64 addr, size;
+	u64 addr = 0, size = 0, ioremap_miimcfg = 0;
 	int err = 0;
 
 	new_bus = mdiobus_alloc();
@@ -268,8 +279,22 @@
 	fsl_pq_mdio_bus_name(new_bus->id, np);
 
 	/* Set the PHY base address */
-	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
-	regs = ioremap(addr, size);
+	if (of_device_is_compatible(np,"fsl,gianfar-mdio") ||
+		of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+		of_device_is_compatible(np, "fsl,ucc-mdio") ||
+		of_device_is_compatible(np,"ucc_geth_phy" )) {
+		addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+		ioremap_miimcfg =  container_of(addr, struct fsl_pq_mdio, miimcfg);
+		regs = ioremap(ioremap_miimcfg, size +
+				offsetof(struct fsl_pq_mdio, miimcfg));
+	} else if (of_device_is_compatible(np,"fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi")) {
+		addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
+		regs = ioremap(addr, size);
+	} else {
+		err = -EINVAL;
+		goto err_free_bus;
+	}
 
 	if (NULL == regs) {
 		err = -ENOMEM;
@@ -290,9 +315,15 @@
 
 	if (of_device_is_compatible(np, "fsl,gianfar-mdio") ||
 			of_device_is_compatible(np, "fsl,gianfar-tbi") ||
+			of_device_is_compatible(np, "fsl,etsec2-mdio") ||
+			of_device_is_compatible(np, "fsl,etsec2-tbi") ||
 			of_device_is_compatible(np, "gianfar")) {
 #if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
-		tbipa = get_gfar_tbipa(regs);
+		tbipa = get_gfar_tbipa(regs, np);
+		if (!tbipa) {
+			err = -EINVAL;
+			goto err_free_irqs;
+		}
 #else
 		err = -ENODEV;
 		goto err_free_irqs;
@@ -405,6 +436,12 @@
 	{
 		.compatible = "fsl,gianfar-mdio",
 	},
+	{
+		.compatible = "fsl,etsec2-tbi",
+	},
+	{
+		.compatible = "fsl,etsec2-mdio",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, fsl_pq_mdio_match);
diff --git a/drivers/net/fsl_pq_mdio.h b/drivers/net/fsl_pq_mdio.h
index 36dad52..1f7d865 100644
--- a/drivers/net/fsl_pq_mdio.h
+++ b/drivers/net/fsl_pq_mdio.h
@@ -3,8 +3,9 @@
  * Driver for the MDIO bus controller on Freescale PowerQUICC processors
  *
  * Author: Andy Fleming
+ * Modifier: Sandeep Gopalpet
  *
- * Copyright (c) 2002-2004,2008 Freescale Semiconductor, Inc.
+ * Copyright 2002-2004, 2008-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -23,6 +24,12 @@
 #define MII_READ_COMMAND       0x00000001
 
 struct fsl_pq_mdio {
+	u8 res1[16];
+	u32 ieventm;	/* MDIO Interrupt event register (for etsec2)*/
+	u32 imaskm;	/* MDIO Interrupt mask register (for etsec2)*/
+	u8 res2[4];
+	u32 emapm;	/* MDIO Event mapping register (for etsec2)*/
+	u8 res3[1280];
 	u32 miimcfg;		/* MII management configuration reg */
 	u32 miimcom;		/* MII management command reg */
 	u32 miimadd;		/* MII management address reg */
@@ -31,9 +38,9 @@
 	u32 miimind;		/* MII management indication reg */
 	u8 reserved[28];	/* Space holder */
 	u32 utbipar;		/* TBI phy address reg (only on UCC) */
+	u8 res4[2728];
 } __attribute__ ((packed));
 
-
 int fsl_pq_mdio_read(struct mii_bus *bus, int mii_id, int regnum);
 int fsl_pq_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value);
 int fsl_pq_local_mdio_write(struct fsl_pq_mdio __iomem *regs, int mii_id,
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 5bf31f1..086d40dd 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -8,9 +8,10 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2006 Freescale Semiconductor, Inc.
- * Copyright (c) 2007 MontaVista Software, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
+ * Copyright 2007 MontaVista Software, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -109,7 +110,7 @@
 static void gfar_timeout(struct net_device *dev);
 static int gfar_close(struct net_device *dev);
 struct sk_buff *gfar_new_skb(struct net_device *dev);
-static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
 		struct sk_buff *skb);
 static int gfar_set_mac_address(struct net_device *dev);
 static int gfar_change_mtu(struct net_device *dev, int new_mtu);
@@ -130,8 +131,8 @@
 #ifdef CONFIG_NET_POLL_CONTROLLER
 static void gfar_netpoll(struct net_device *dev);
 #endif
-int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
-static int gfar_clean_tx_ring(struct net_device *dev);
+int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
+static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue);
 static int gfar_process_frame(struct net_device *dev, struct sk_buff *skb,
 			      int amount_pull);
 static void gfar_vlan_rx_register(struct net_device *netdev,
@@ -142,11 +143,277 @@
 static void gfar_clear_exact_match(struct net_device *dev);
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr);
 static int gfar_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb);
 
 MODULE_AUTHOR("Freescale Semiconductor, Inc");
 MODULE_DESCRIPTION("Gianfar Ethernet Driver");
 MODULE_LICENSE("GPL");
 
+static void gfar_init_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
+			    dma_addr_t buf)
+{
+	u32 lstatus;
+
+	bdp->bufPtr = buf;
+
+	lstatus = BD_LFLAG(RXBD_EMPTY | RXBD_INTERRUPT);
+	if (bdp == rx_queue->rx_bd_base + rx_queue->rx_ring_size - 1)
+		lstatus |= BD_LFLAG(RXBD_WRAP);
+
+	eieio();
+
+	bdp->lstatus = lstatus;
+}
+
+static int gfar_init_bds(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct txbd8 *txbdp;
+	struct rxbd8 *rxbdp;
+	int i, j;
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		/* Initialize some variables in our dev structure */
+		tx_queue->num_txbdfree = tx_queue->tx_ring_size;
+		tx_queue->dirty_tx = tx_queue->tx_bd_base;
+		tx_queue->cur_tx = tx_queue->tx_bd_base;
+		tx_queue->skb_curtx = 0;
+		tx_queue->skb_dirtytx = 0;
+
+		/* Initialize Transmit Descriptor Ring */
+		txbdp = tx_queue->tx_bd_base;
+		for (j = 0; j < tx_queue->tx_ring_size; j++) {
+			txbdp->lstatus = 0;
+			txbdp->bufPtr = 0;
+			txbdp++;
+		}
+
+		/* Set the last descriptor in the ring to indicate wrap */
+		txbdp--;
+		txbdp->status |= TXBD_WRAP;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->cur_rx = rx_queue->rx_bd_base;
+		rx_queue->skb_currx = 0;
+		rxbdp = rx_queue->rx_bd_base;
+
+		for (j = 0; j < rx_queue->rx_ring_size; j++) {
+			struct sk_buff *skb = rx_queue->rx_skbuff[j];
+
+			if (skb) {
+				gfar_init_rxbdp(rx_queue, rxbdp,
+						rxbdp->bufPtr);
+			} else {
+				skb = gfar_new_skb(ndev);
+				if (!skb) {
+					pr_err("%s: Can't allocate RX buffers\n",
+							ndev->name);
+					goto err_rxalloc_fail;
+				}
+				rx_queue->rx_skbuff[j] = skb;
+
+				gfar_new_rxbdp(rx_queue, rxbdp, skb);
+			}
+
+			rxbdp++;
+		}
+
+	}
+
+	return 0;
+
+err_rxalloc_fail:
+	free_skb_resources(priv);
+	return -ENOMEM;
+}
+
+static int gfar_alloc_skb_resources(struct net_device *ndev)
+{
+	void *vaddr;
+	dma_addr_t addr;
+	int i, j, k;
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct device *dev = &priv->ofdev->dev;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+
+	priv->total_tx_ring_size = 0;
+	for (i = 0; i < priv->num_tx_queues; i++)
+		priv->total_tx_ring_size += priv->tx_queue[i]->tx_ring_size;
+
+	priv->total_rx_ring_size = 0;
+	for (i = 0; i < priv->num_rx_queues; i++)
+		priv->total_rx_ring_size += priv->rx_queue[i]->rx_ring_size;
+
+	/* Allocate memory for the buffer descriptors */
+	vaddr = dma_alloc_coherent(dev,
+			sizeof(struct txbd8) * priv->total_tx_ring_size +
+			sizeof(struct rxbd8) * priv->total_rx_ring_size,
+			&addr, GFP_KERNEL);
+	if (!vaddr) {
+		if (netif_msg_ifup(priv))
+			pr_err("%s: Could not allocate buffer descriptors!\n",
+			       ndev->name);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		tx_queue->tx_bd_base = (struct txbd8 *) vaddr;
+		tx_queue->tx_bd_dma_base = addr;
+		tx_queue->dev = ndev;
+		/* enet DMA only understands physical addresses */
+		addr    += sizeof(struct txbd8) *tx_queue->tx_ring_size;
+		vaddr   += sizeof(struct txbd8) *tx_queue->tx_ring_size;
+	}
+
+	/* Start the rx descriptor ring where the tx ring leaves off */
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->rx_bd_base = (struct rxbd8 *) vaddr;
+		rx_queue->rx_bd_dma_base = addr;
+		rx_queue->dev = ndev;
+		addr    += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
+		vaddr   += sizeof (struct rxbd8) * rx_queue->rx_ring_size;
+	}
+
+	/* Setup the skbuff rings */
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		tx_queue->tx_skbuff = kmalloc(sizeof(*tx_queue->tx_skbuff) *
+				  tx_queue->tx_ring_size, GFP_KERNEL);
+		if (!tx_queue->tx_skbuff) {
+			if (netif_msg_ifup(priv))
+				pr_err("%s: Could not allocate tx_skbuff\n",
+						ndev->name);
+			goto cleanup;
+		}
+
+		for (k = 0; k < tx_queue->tx_ring_size; k++)
+			tx_queue->tx_skbuff[k] = NULL;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		rx_queue->rx_skbuff = kmalloc(sizeof(*rx_queue->rx_skbuff) *
+				  rx_queue->rx_ring_size, GFP_KERNEL);
+
+		if (!rx_queue->rx_skbuff) {
+			if (netif_msg_ifup(priv))
+				pr_err("%s: Could not allocate rx_skbuff\n",
+				       ndev->name);
+			goto cleanup;
+		}
+
+		for (j = 0; j < rx_queue->rx_ring_size; j++)
+			rx_queue->rx_skbuff[j] = NULL;
+	}
+
+	if (gfar_init_bds(ndev))
+		goto cleanup;
+
+	return 0;
+
+cleanup:
+	free_skb_resources(priv);
+	return -ENOMEM;
+}
+
+static void gfar_init_tx_rx_base(struct gfar_private *priv)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 *baddr;
+	int i;
+
+	baddr = &regs->tbase0;
+	for(i = 0; i < priv->num_tx_queues; i++) {
+		gfar_write(baddr, priv->tx_queue[i]->tx_bd_dma_base);
+		baddr	+= 2;
+	}
+
+	baddr = &regs->rbase0;
+	for(i = 0; i < priv->num_rx_queues; i++) {
+		gfar_write(baddr, priv->rx_queue[i]->rx_bd_dma_base);
+		baddr   += 2;
+	}
+}
+
+static void gfar_init_mac(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 rctrl = 0;
+	u32 tctrl = 0;
+	u32 attrs = 0;
+
+	/* write the tx/rx base registers */
+	gfar_init_tx_rx_base(priv);
+
+	/* Configure the coalescing support */
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
+
+	if (priv->rx_filer_enable)
+		rctrl |= RCTRL_FILREN;
+
+	if (priv->rx_csum_enable)
+		rctrl |= RCTRL_CHECKSUMMING;
+
+	if (priv->extended_hash) {
+		rctrl |= RCTRL_EXTHASH;
+
+		gfar_clear_exact_match(ndev);
+		rctrl |= RCTRL_EMEN;
+	}
+
+	if (priv->padding) {
+		rctrl &= ~RCTRL_PAL_MASK;
+		rctrl |= RCTRL_PADDING(priv->padding);
+	}
+
+	/* keep vlan related bits if it's enabled */
+	if (priv->vlgrp) {
+		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
+		tctrl |= TCTRL_VLINS;
+	}
+
+	/* Init rctrl based on our settings */
+	gfar_write(&regs->rctrl, rctrl);
+
+	if (ndev->features & NETIF_F_IP_CSUM)
+		tctrl |= TCTRL_INIT_CSUM;
+
+	tctrl |= TCTRL_TXSCHED_PRIO;
+
+	gfar_write(&regs->tctrl, tctrl);
+
+	/* Set the extraction length and index */
+	attrs = ATTRELI_EL(priv->rx_stash_size) |
+		ATTRELI_EI(priv->rx_stash_index);
+
+	gfar_write(&regs->attreli, attrs);
+
+	/* Start with defaults, and add stashing or locking
+	 * depending on the approprate variables */
+	attrs = ATTR_INIT_SETTINGS;
+
+	if (priv->bd_stash_en)
+		attrs |= ATTR_BDSTASH;
+
+	if (priv->rx_stash_size != 0)
+		attrs |= ATTR_BUFSTASH;
+
+	gfar_write(&regs->attr, attrs);
+
+	gfar_write(&regs->fifo_tx_thr, priv->fifo_threshold);
+	gfar_write(&regs->fifo_tx_starve, priv->fifo_starve);
+	gfar_write(&regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
+}
+
 static const struct net_device_ops gfar_netdev_ops = {
 	.ndo_open = gfar_enet_open,
 	.ndo_start_xmit = gfar_start_xmit,
@@ -155,6 +422,7 @@
 	.ndo_set_multicast_list = gfar_set_multi,
 	.ndo_tx_timeout = gfar_timeout,
 	.ndo_do_ioctl = gfar_ioctl,
+	.ndo_select_queue = gfar_select_queue,
 	.ndo_vlan_rx_register = gfar_vlan_rx_register,
 	.ndo_set_mac_address = eth_mac_addr,
 	.ndo_validate_addr = eth_validate_addr,
@@ -163,56 +431,252 @@
 #endif
 };
 
+unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
+
+void lock_rx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		spin_lock(&priv->rx_queue[i]->rxlock);
+}
+
+void lock_tx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		spin_lock(&priv->tx_queue[i]->txlock);
+}
+
+void unlock_rx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		spin_unlock(&priv->rx_queue[i]->rxlock);
+}
+
+void unlock_tx_qs(struct gfar_private *priv)
+{
+	int i = 0x0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		spin_unlock(&priv->tx_queue[i]->txlock);
+}
+
 /* Returns 1 if incoming frames use an FCB */
 static inline int gfar_uses_fcb(struct gfar_private *priv)
 {
 	return priv->vlgrp || priv->rx_csum_enable;
 }
 
-static int gfar_of_init(struct net_device *dev)
+u16 gfar_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	return skb_get_queue_mapping(skb);
+}
+static void free_tx_pointers(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_tx_queues; i++)
+		kfree(priv->tx_queue[i]);
+}
+
+static void free_rx_pointers(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_rx_queues; i++)
+		kfree(priv->rx_queue[i]);
+}
+
+static void unmap_group_regs(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < MAXGROUPS; i++)
+		if (priv->gfargrp[i].regs)
+			iounmap(priv->gfargrp[i].regs);
+}
+
+static void disable_napi(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_grps; i++)
+		napi_disable(&priv->gfargrp[i].napi);
+}
+
+static void enable_napi(struct gfar_private *priv)
+{
+	int i = 0;
+
+	for (i = 0; i < priv->num_grps; i++)
+		napi_enable(&priv->gfargrp[i].napi);
+}
+
+static int gfar_parse_group(struct device_node *np,
+		struct gfar_private *priv, const char *model)
+{
+	u32 *queue_mask;
+	u64 addr, size;
+
+	addr = of_translate_address(np,
+			of_get_address(np, 0, &size, NULL));
+	priv->gfargrp[priv->num_grps].regs = ioremap(addr, size);
+
+	if (!priv->gfargrp[priv->num_grps].regs)
+		return -ENOMEM;
+
+	priv->gfargrp[priv->num_grps].interruptTransmit =
+			irq_of_parse_and_map(np, 0);
+
+	/* If we aren't the FEC we have multiple interrupts */
+	if (model && strcasecmp(model, "FEC")) {
+		priv->gfargrp[priv->num_grps].interruptReceive =
+			irq_of_parse_and_map(np, 1);
+		priv->gfargrp[priv->num_grps].interruptError =
+			irq_of_parse_and_map(np,2);
+		if (priv->gfargrp[priv->num_grps].interruptTransmit < 0 ||
+			priv->gfargrp[priv->num_grps].interruptReceive < 0 ||
+			priv->gfargrp[priv->num_grps].interruptError < 0) {
+			return -EINVAL;
+		}
+	}
+
+	priv->gfargrp[priv->num_grps].grp_id = priv->num_grps;
+	priv->gfargrp[priv->num_grps].priv = priv;
+	spin_lock_init(&priv->gfargrp[priv->num_grps].grplock);
+	if(priv->mode == MQ_MG_MODE) {
+		queue_mask = (u32 *)of_get_property(np,
+					"fsl,rx-bit-map", NULL);
+		priv->gfargrp[priv->num_grps].rx_bit_map =
+			queue_mask ?  *queue_mask :(DEFAULT_MAPPING >> priv->num_grps);
+		queue_mask = (u32 *)of_get_property(np,
+					"fsl,tx-bit-map", NULL);
+		priv->gfargrp[priv->num_grps].tx_bit_map =
+			queue_mask ? *queue_mask : (DEFAULT_MAPPING >> priv->num_grps);
+	} else {
+		priv->gfargrp[priv->num_grps].rx_bit_map = 0xFF;
+		priv->gfargrp[priv->num_grps].tx_bit_map = 0xFF;
+	}
+	priv->num_grps++;
+
+	return 0;
+}
+
+static int gfar_of_init(struct of_device *ofdev, struct net_device **pdev)
 {
 	const char *model;
 	const char *ctype;
 	const void *mac_addr;
-	u64 addr, size;
-	int err = 0;
-	struct gfar_private *priv = netdev_priv(dev);
-	struct device_node *np = priv->node;
+	int err = 0, i;
+	struct net_device *dev = NULL;
+	struct gfar_private *priv = NULL;
+	struct device_node *np = ofdev->node;
+	struct device_node *child = NULL;
 	const u32 *stash;
 	const u32 *stash_len;
 	const u32 *stash_idx;
+	unsigned int num_tx_qs, num_rx_qs;
+	u32 *tx_queues, *rx_queues;
 
 	if (!np || !of_device_is_available(np))
 		return -ENODEV;
 
-	/* get a pointer to the register memory */
-	addr = of_translate_address(np, of_get_address(np, 0, &size, NULL));
-	priv->regs = ioremap(addr, size);
+	/* parse the num of tx and rx queues */
+	tx_queues = (u32 *)of_get_property(np, "fsl,num_tx_queues", NULL);
+	num_tx_qs = tx_queues ? *tx_queues : 1;
 
-	if (priv->regs == NULL)
+	if (num_tx_qs > MAX_TX_QS) {
+		printk(KERN_ERR "num_tx_qs(=%d) greater than MAX_TX_QS(=%d)\n",
+				num_tx_qs, MAX_TX_QS);
+		printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+		return -EINVAL;
+	}
+
+	rx_queues = (u32 *)of_get_property(np, "fsl,num_rx_queues", NULL);
+	num_rx_qs = rx_queues ? *rx_queues : 1;
+
+	if (num_rx_qs > MAX_RX_QS) {
+		printk(KERN_ERR "num_rx_qs(=%d) greater than MAX_RX_QS(=%d)\n",
+				num_tx_qs, MAX_TX_QS);
+		printk(KERN_ERR "Cannot do alloc_etherdev, aborting\n");
+		return -EINVAL;
+	}
+
+	*pdev = alloc_etherdev_mq(sizeof(*priv), num_tx_qs);
+	dev = *pdev;
+	if (NULL == dev)
 		return -ENOMEM;
 
-	priv->interruptTransmit = irq_of_parse_and_map(np, 0);
+	priv = netdev_priv(dev);
+	priv->node = ofdev->node;
+	priv->ndev = dev;
+
+	dev->num_tx_queues = num_tx_qs;
+	dev->real_num_tx_queues = num_tx_qs;
+	priv->num_tx_queues = num_tx_qs;
+	priv->num_rx_queues = num_rx_qs;
+	priv->num_grps = 0x0;
 
 	model = of_get_property(np, "model", NULL);
 
-	/* If we aren't the FEC we have multiple interrupts */
-	if (model && strcasecmp(model, "FEC")) {
-		priv->interruptReceive = irq_of_parse_and_map(np, 1);
+	for (i = 0; i < MAXGROUPS; i++)
+		priv->gfargrp[i].regs = NULL;
 
-		priv->interruptError = irq_of_parse_and_map(np, 2);
-
-		if (priv->interruptTransmit < 0 ||
-				priv->interruptReceive < 0 ||
-				priv->interruptError < 0) {
-			err = -EINVAL;
-			goto err_out;
+	/* Parse and initialize group specific information */
+	if (of_device_is_compatible(np, "fsl,etsec2")) {
+		priv->mode = MQ_MG_MODE;
+		for_each_child_of_node(np, child) {
+			err = gfar_parse_group(child, priv, model);
+			if (err)
+				goto err_grp_init;
 		}
+	} else {
+		priv->mode = SQ_SG_MODE;
+		err = gfar_parse_group(np, priv, model);
+		if(err)
+			goto err_grp_init;
 	}
 
+	for (i = 0; i < priv->num_tx_queues; i++)
+	       priv->tx_queue[i] = NULL;
+	for (i = 0; i < priv->num_rx_queues; i++)
+		priv->rx_queue[i] = NULL;
+
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i] =  (struct gfar_priv_tx_q *)kmalloc(
+				sizeof (struct gfar_priv_tx_q), GFP_KERNEL);
+		if (!priv->tx_queue[i]) {
+			err = -ENOMEM;
+			goto tx_alloc_failed;
+		}
+		priv->tx_queue[i]->tx_skbuff = NULL;
+		priv->tx_queue[i]->qindex = i;
+		priv->tx_queue[i]->dev = dev;
+		spin_lock_init(&(priv->tx_queue[i]->txlock));
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i] = (struct gfar_priv_rx_q *)kmalloc(
+					sizeof (struct gfar_priv_rx_q), GFP_KERNEL);
+		if (!priv->rx_queue[i]) {
+			err = -ENOMEM;
+			goto rx_alloc_failed;
+		}
+		priv->rx_queue[i]->rx_skbuff = NULL;
+		priv->rx_queue[i]->qindex = i;
+		priv->rx_queue[i]->dev = dev;
+		spin_lock_init(&(priv->rx_queue[i]->rxlock));
+	}
+
+
 	stash = of_get_property(np, "bd-stash", NULL);
 
-	if(stash) {
+	if (stash) {
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_BD_STASHING;
 		priv->bd_stash_en = 1;
 	}
@@ -270,8 +734,13 @@
 
 	return 0;
 
-err_out:
-	iounmap(priv->regs);
+rx_alloc_failed:
+	free_rx_pointers(priv);
+tx_alloc_failed:
+	free_tx_pointers(priv);
+err_grp_init:
+	unmap_group_regs(priv);
+	free_netdev(dev);
 	return err;
 }
 
@@ -289,6 +758,84 @@
 	return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd);
 }
 
+static unsigned int reverse_bitmap(unsigned int bit_map, unsigned int max_qs)
+{
+	unsigned int new_bit_map = 0x0;
+	int mask = 0x1 << (max_qs - 1), i;
+	for (i = 0; i < max_qs; i++) {
+		if (bit_map & mask)
+			new_bit_map = new_bit_map + (1 << i);
+		mask = mask >> 0x1;
+	}
+	return new_bit_map;
+}
+
+u32 cluster_entry_per_class(struct gfar_private *priv, u32 rqfar, u32 class)
+{
+	u32 rqfpr = FPR_FILER_MASK;
+	u32 rqfcr = 0x0;
+
+	rqfar--;
+	rqfcr = RQFCR_CLE | RQFCR_PID_MASK | RQFCR_CMP_EXACT;
+	ftp_rqfpr[rqfar] = rqfpr;
+	ftp_rqfcr[rqfar] = rqfcr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_NOMATCH;
+	ftp_rqfpr[rqfar] = rqfpr;
+	ftp_rqfcr[rqfar] = rqfcr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_PARSE | RQFCR_CLE | RQFCR_AND;
+	rqfpr = class;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar--;
+	rqfcr = RQFCR_CMP_EXACT | RQFCR_PID_MASK | RQFCR_AND;
+	rqfpr = class;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	return rqfar;
+}
+
+static void gfar_init_filer_table(struct gfar_private *priv)
+{
+	int i = 0x0;
+	u32 rqfar = MAX_FILER_IDX;
+	u32 rqfcr = 0x0;
+	u32 rqfpr = FPR_FILER_MASK;
+
+	/* Default rule */
+	rqfcr = RQFCR_CMP_MATCH;
+	ftp_rqfcr[rqfar] = rqfcr;
+	ftp_rqfpr[rqfar] = rqfpr;
+	gfar_write_filer(priv, rqfar, rqfcr, rqfpr);
+
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_UDP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV6 | RQFPR_TCP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_UDP);
+	rqfar = cluster_entry_per_class(priv, rqfar, RQFPR_IPV4 | RQFPR_TCP);
+
+	/* cur_filer_idx indicated the fisrt non-masked rule */
+	priv->cur_filer_idx = rqfar;
+
+	/* Rest are masked rules */
+	rqfcr = RQFCR_CMP_NOMATCH;
+	for (i = 0; i < rqfar; i++) {
+		ftp_rqfcr[i] = rqfcr;
+		ftp_rqfpr[i] = rqfpr;
+		gfar_write_filer(priv, i, rqfcr, rqfpr);
+	}
+}
+
 /* Set up the ethernet device structure, private data,
  * and anything else we need before we start */
 static int gfar_probe(struct of_device *ofdev,
@@ -297,14 +844,17 @@
 	u32 tempval;
 	struct net_device *dev = NULL;
 	struct gfar_private *priv = NULL;
-	int err = 0;
+	struct gfar __iomem *regs = NULL;
+	int err = 0, i, grp_idx = 0;
 	int len_devname;
+	u32 rstat = 0, tstat = 0, rqueue = 0, tqueue = 0;
+	u32 isrg = 0;
+	u32 *baddr;
 
-	/* Create an ethernet device instance */
-	dev = alloc_etherdev(sizeof (*priv));
+	err = gfar_of_init(ofdev, &dev);
 
-	if (NULL == dev)
-		return -ENOMEM;
+	if (err)
+		return err;
 
 	priv = netdev_priv(dev);
 	priv->ndev = dev;
@@ -312,50 +862,46 @@
 	priv->node = ofdev->node;
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
-	err = gfar_of_init(dev);
-
-	if (err)
-		goto regs_fail;
-
-	spin_lock_init(&priv->txlock);
-	spin_lock_init(&priv->rxlock);
 	spin_lock_init(&priv->bflock);
 	INIT_WORK(&priv->reset_task, gfar_reset_task);
 
 	dev_set_drvdata(&ofdev->dev, priv);
+	regs = priv->gfargrp[0].regs;
 
 	/* Stop the DMA engine now, in case it was running before */
 	/* (The firmware could have used it, and left it running). */
 	gfar_halt(dev);
 
 	/* Reset MAC layer */
-	gfar_write(&priv->regs->maccfg1, MACCFG1_SOFT_RESET);
+	gfar_write(&regs->maccfg1, MACCFG1_SOFT_RESET);
 
 	/* We need to delay at least 3 TX clocks */
 	udelay(2);
 
 	tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW);
-	gfar_write(&priv->regs->maccfg1, tempval);
+	gfar_write(&regs->maccfg1, tempval);
 
 	/* Initialize MACCFG2. */
-	gfar_write(&priv->regs->maccfg2, MACCFG2_INIT_SETTINGS);
+	gfar_write(&regs->maccfg2, MACCFG2_INIT_SETTINGS);
 
 	/* Initialize ECNTRL */
-	gfar_write(&priv->regs->ecntrl, ECNTRL_INIT_SETTINGS);
+	gfar_write(&regs->ecntrl, ECNTRL_INIT_SETTINGS);
 
 	/* Set the dev->base_addr to the gfar reg region */
-	dev->base_addr = (unsigned long) (priv->regs);
+	dev->base_addr = (unsigned long) regs;
 
 	SET_NETDEV_DEV(dev, &ofdev->dev);
 
 	/* Fill in the dev structure */
 	dev->watchdog_timeo = TX_TIMEOUT;
-	netif_napi_add(dev, &priv->napi, gfar_poll, GFAR_DEV_WEIGHT);
 	dev->mtu = 1500;
-
 	dev->netdev_ops = &gfar_netdev_ops;
 	dev->ethtool_ops = &gfar_ethtool_ops;
 
+	/* Register for napi ...We are registering NAPI for each grp */
+	for (i = 0; i < priv->num_grps; i++)
+		netif_napi_add(dev, &priv->gfargrp[i].napi, gfar_poll, GFAR_DEV_WEIGHT);
+
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM) {
 		priv->rx_csum_enable = 1;
 		dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
@@ -371,35 +917,35 @@
 		priv->extended_hash = 1;
 		priv->hash_width = 9;
 
-		priv->hash_regs[0] = &priv->regs->igaddr0;
-		priv->hash_regs[1] = &priv->regs->igaddr1;
-		priv->hash_regs[2] = &priv->regs->igaddr2;
-		priv->hash_regs[3] = &priv->regs->igaddr3;
-		priv->hash_regs[4] = &priv->regs->igaddr4;
-		priv->hash_regs[5] = &priv->regs->igaddr5;
-		priv->hash_regs[6] = &priv->regs->igaddr6;
-		priv->hash_regs[7] = &priv->regs->igaddr7;
-		priv->hash_regs[8] = &priv->regs->gaddr0;
-		priv->hash_regs[9] = &priv->regs->gaddr1;
-		priv->hash_regs[10] = &priv->regs->gaddr2;
-		priv->hash_regs[11] = &priv->regs->gaddr3;
-		priv->hash_regs[12] = &priv->regs->gaddr4;
-		priv->hash_regs[13] = &priv->regs->gaddr5;
-		priv->hash_regs[14] = &priv->regs->gaddr6;
-		priv->hash_regs[15] = &priv->regs->gaddr7;
+		priv->hash_regs[0] = &regs->igaddr0;
+		priv->hash_regs[1] = &regs->igaddr1;
+		priv->hash_regs[2] = &regs->igaddr2;
+		priv->hash_regs[3] = &regs->igaddr3;
+		priv->hash_regs[4] = &regs->igaddr4;
+		priv->hash_regs[5] = &regs->igaddr5;
+		priv->hash_regs[6] = &regs->igaddr6;
+		priv->hash_regs[7] = &regs->igaddr7;
+		priv->hash_regs[8] = &regs->gaddr0;
+		priv->hash_regs[9] = &regs->gaddr1;
+		priv->hash_regs[10] = &regs->gaddr2;
+		priv->hash_regs[11] = &regs->gaddr3;
+		priv->hash_regs[12] = &regs->gaddr4;
+		priv->hash_regs[13] = &regs->gaddr5;
+		priv->hash_regs[14] = &regs->gaddr6;
+		priv->hash_regs[15] = &regs->gaddr7;
 
 	} else {
 		priv->extended_hash = 0;
 		priv->hash_width = 8;
 
-		priv->hash_regs[0] = &priv->regs->gaddr0;
-		priv->hash_regs[1] = &priv->regs->gaddr1;
-		priv->hash_regs[2] = &priv->regs->gaddr2;
-		priv->hash_regs[3] = &priv->regs->gaddr3;
-		priv->hash_regs[4] = &priv->regs->gaddr4;
-		priv->hash_regs[5] = &priv->regs->gaddr5;
-		priv->hash_regs[6] = &priv->regs->gaddr6;
-		priv->hash_regs[7] = &priv->regs->gaddr7;
+		priv->hash_regs[0] = &regs->gaddr0;
+		priv->hash_regs[1] = &regs->gaddr1;
+		priv->hash_regs[2] = &regs->gaddr2;
+		priv->hash_regs[3] = &regs->gaddr3;
+		priv->hash_regs[4] = &regs->gaddr4;
+		priv->hash_regs[5] = &regs->gaddr5;
+		priv->hash_regs[6] = &regs->gaddr6;
+		priv->hash_regs[7] = &regs->gaddr7;
 	}
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_PADDING)
@@ -410,15 +956,70 @@
 	if (dev->features & NETIF_F_IP_CSUM)
 		dev->hard_header_len += GMAC_FCB_LEN;
 
-	priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
-	priv->tx_ring_size = DEFAULT_TX_RING_SIZE;
-	priv->rx_ring_size = DEFAULT_RX_RING_SIZE;
-	priv->num_txbdfree = DEFAULT_TX_RING_SIZE;
+	/* Program the isrg regs only if number of grps > 1 */
+	if (priv->num_grps > 1) {
+		baddr = &regs->isrg0;
+		for (i = 0; i < priv->num_grps; i++) {
+			isrg |= (priv->gfargrp[i].rx_bit_map << ISRG_SHIFT_RX);
+			isrg |= (priv->gfargrp[i].tx_bit_map << ISRG_SHIFT_TX);
+			gfar_write(baddr, isrg);
+			baddr++;
+			isrg = 0x0;
+		}
+	}
 
-	priv->txcoalescing = DEFAULT_TX_COALESCE;
-	priv->txic = DEFAULT_TXIC;
-	priv->rxcoalescing = DEFAULT_RX_COALESCE;
-	priv->rxic = DEFAULT_RXIC;
+	/* Need to reverse the bit maps as  bit_map's MSB is q0
+	 * but, for_each_bit parses from right to left, which
+	 * basically reverses the queue numbers */
+	for (i = 0; i< priv->num_grps; i++) {
+		priv->gfargrp[i].tx_bit_map = reverse_bitmap(
+				priv->gfargrp[i].tx_bit_map, MAX_TX_QS);
+		priv->gfargrp[i].rx_bit_map = reverse_bitmap(
+				priv->gfargrp[i].rx_bit_map, MAX_RX_QS);
+	}
+
+	/* Calculate RSTAT, TSTAT, RQUEUE and TQUEUE values,
+	 * also assign queues to groups */
+	for (grp_idx = 0; grp_idx < priv->num_grps; grp_idx++) {
+		priv->gfargrp[grp_idx].num_rx_queues = 0x0;
+		for_each_bit(i, &priv->gfargrp[grp_idx].rx_bit_map,
+				priv->num_rx_queues) {
+			priv->gfargrp[grp_idx].num_rx_queues++;
+			priv->rx_queue[i]->grp = &priv->gfargrp[grp_idx];
+			rstat = rstat | (RSTAT_CLEAR_RHALT >> i);
+			rqueue = rqueue | ((RQUEUE_EN0 | RQUEUE_EX0) >> i);
+		}
+		priv->gfargrp[grp_idx].num_tx_queues = 0x0;
+		for_each_bit (i, &priv->gfargrp[grp_idx].tx_bit_map,
+				priv->num_tx_queues) {
+			priv->gfargrp[grp_idx].num_tx_queues++;
+			priv->tx_queue[i]->grp = &priv->gfargrp[grp_idx];
+			tstat = tstat | (TSTAT_CLEAR_THALT >> i);
+			tqueue = tqueue | (TQUEUE_EN0 >> i);
+		}
+		priv->gfargrp[grp_idx].rstat = rstat;
+		priv->gfargrp[grp_idx].tstat = tstat;
+		rstat = tstat =0;
+	}
+
+	gfar_write(&regs->rqueue, rqueue);
+	gfar_write(&regs->tqueue, tqueue);
+
+	priv->rx_buffer_size = DEFAULT_RX_BUFFER_SIZE;
+
+	/* Initializing some of the rx/tx queue level parameters */
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i]->tx_ring_size = DEFAULT_TX_RING_SIZE;
+		priv->tx_queue[i]->num_txbdfree = DEFAULT_TX_RING_SIZE;
+		priv->tx_queue[i]->txcoalescing = DEFAULT_TX_COALESCE;
+		priv->tx_queue[i]->txic = DEFAULT_TXIC;
+	}
+
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rx_ring_size = DEFAULT_RX_RING_SIZE;
+		priv->rx_queue[i]->rxcoalescing = DEFAULT_RX_COALESCE;
+		priv->rx_queue[i]->rxic = DEFAULT_RXIC;
+	}
 
 	/* Enable most messages by default */
 	priv->msg_enable = (NETIF_MSG_IFUP << 1 ) - 1;
@@ -439,20 +1040,43 @@
 
 	/* fill out IRQ number and name fields */
 	len_devname = strlen(dev->name);
-	strncpy(&priv->int_name_tx[0], dev->name, len_devname);
-	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		strncpy(&priv->int_name_tx[len_devname],
-			"_tx", sizeof("_tx") + 1);
+	for (i = 0; i < priv->num_grps; i++) {
+		strncpy(&priv->gfargrp[i].int_name_tx[0], dev->name,
+				len_devname);
+		if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
+			strncpy(&priv->gfargrp[i].int_name_tx[len_devname],
+				"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_tx[
+				strlen(priv->gfargrp[i].int_name_tx)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_tx[strlen(
+				priv->gfargrp[i].int_name_tx)],
+				"_tx", sizeof("_tx") + 1);
 
-		strncpy(&priv->int_name_rx[0], dev->name, len_devname);
-		strncpy(&priv->int_name_rx[len_devname],
-			"_rx", sizeof("_rx") + 1);
+			strncpy(&priv->gfargrp[i].int_name_rx[0], dev->name,
+					len_devname);
+			strncpy(&priv->gfargrp[i].int_name_rx[len_devname],
+					"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_rx[
+				strlen(priv->gfargrp[i].int_name_rx)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_rx[strlen(
+				priv->gfargrp[i].int_name_rx)],
+				"_rx", sizeof("_rx") + 1);
 
-		strncpy(&priv->int_name_er[0], dev->name, len_devname);
-		strncpy(&priv->int_name_er[len_devname],
-			"_er", sizeof("_er") + 1);
-	} else
-		priv->int_name_tx[len_devname] = '\0';
+			strncpy(&priv->gfargrp[i].int_name_er[0], dev->name,
+					len_devname);
+			strncpy(&priv->gfargrp[i].int_name_er[len_devname],
+				"_g", sizeof("_g"));
+			priv->gfargrp[i].int_name_er[strlen(
+					priv->gfargrp[i].int_name_er)] = i+48;
+			strncpy(&priv->gfargrp[i].int_name_er[strlen(\
+				priv->gfargrp[i].int_name_er)],
+				"_er", sizeof("_er") + 1);
+		} else
+			priv->gfargrp[i].int_name_tx[len_devname] = '\0';
+	}
+
+	/* Initialize the filer table */
+	gfar_init_filer_table(priv);
 
 	/* Create all the sysfs files */
 	gfar_init_sysfs(dev);
@@ -463,14 +1087,19 @@
 	/* Even more device info helps when determining which kernel */
 	/* provided which set of benchmarks. */
 	printk(KERN_INFO "%s: Running with NAPI enabled\n", dev->name);
-	printk(KERN_INFO "%s: %d/%d RX/TX BD ring size\n",
-	       dev->name, priv->rx_ring_size, priv->tx_ring_size);
+	for (i = 0; i < priv->num_rx_queues; i++)
+		printk(KERN_INFO "%s: :RX BD ring size for Q[%d]: %d\n",
+			dev->name, i, priv->rx_queue[i]->rx_ring_size);
+	for(i = 0; i < priv->num_tx_queues; i++)
+		 printk(KERN_INFO "%s:TX BD ring size for Q[%d]: %d\n",
+			dev->name, i, priv->tx_queue[i]->tx_ring_size);
 
 	return 0;
 
 register_fail:
-	iounmap(priv->regs);
-regs_fail:
+	unmap_group_regs(priv);
+	free_tx_pointers(priv);
+	free_rx_pointers(priv);
 	if (priv->phy_node)
 		of_node_put(priv->phy_node);
 	if (priv->tbi_node)
@@ -491,54 +1120,59 @@
 	dev_set_drvdata(&ofdev->dev, NULL);
 
 	unregister_netdev(priv->ndev);
-	iounmap(priv->regs);
+	unmap_group_regs(priv);
 	free_netdev(priv->ndev);
 
 	return 0;
 }
 
 #ifdef CONFIG_PM
-static int gfar_suspend(struct of_device *ofdev, pm_message_t state)
+
+static int gfar_suspend(struct device *dev)
 {
-	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
-	struct net_device *dev = priv->ndev;
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	u32 tempval;
 
 	int magic_packet = priv->wol_en &&
 		(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
 
-	netif_device_detach(dev);
+	netif_device_detach(ndev);
 
-	if (netif_running(dev)) {
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+	if (netif_running(ndev)) {
 
-		gfar_halt_nodisable(dev);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
+
+		gfar_halt_nodisable(ndev);
 
 		/* Disable Tx, and Rx if wake-on-LAN is disabled. */
-		tempval = gfar_read(&priv->regs->maccfg1);
+		tempval = gfar_read(&regs->maccfg1);
 
 		tempval &= ~MACCFG1_TX_EN;
 
 		if (!magic_packet)
 			tempval &= ~MACCFG1_RX_EN;
 
-		gfar_write(&priv->regs->maccfg1, tempval);
+		gfar_write(&regs->maccfg1, tempval);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_rx_qs(priv);
+		unlock_tx_qs(priv);
+		local_irq_restore(flags);
 
-		napi_disable(&priv->napi);
+		disable_napi(priv);
 
 		if (magic_packet) {
 			/* Enable interrupt on Magic Packet */
-			gfar_write(&priv->regs->imask, IMASK_MAG);
+			gfar_write(&regs->imask, IMASK_MAG);
 
 			/* Enable Magic Packet mode */
-			tempval = gfar_read(&priv->regs->maccfg2);
+			tempval = gfar_read(&regs->maccfg2);
 			tempval |= MACCFG2_MPEN;
-			gfar_write(&priv->regs->maccfg2, tempval);
+			gfar_write(&regs->maccfg2, tempval);
 		} else {
 			phy_stop(priv->phydev);
 		}
@@ -547,17 +1181,18 @@
 	return 0;
 }
 
-static int gfar_resume(struct of_device *ofdev)
+static int gfar_resume(struct device *dev)
 {
-	struct gfar_private *priv = dev_get_drvdata(&ofdev->dev);
-	struct net_device *dev = priv->ndev;
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	u32 tempval;
 	int magic_packet = priv->wol_en &&
 		(priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET);
 
-	if (!netif_running(dev)) {
-		netif_device_attach(dev);
+	if (!netif_running(ndev)) {
+		netif_device_attach(ndev);
 		return 0;
 	}
 
@@ -567,28 +1202,80 @@
 	/* Disable Magic Packet mode, in case something
 	 * else woke us up.
 	 */
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+	lock_rx_qs(priv);
 
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
-
-	tempval = gfar_read(&priv->regs->maccfg2);
+	tempval = gfar_read(&regs->maccfg2);
 	tempval &= ~MACCFG2_MPEN;
-	gfar_write(&priv->regs->maccfg2, tempval);
+	gfar_write(&regs->maccfg2, tempval);
 
-	gfar_start(dev);
+	gfar_start(ndev);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_rx_qs(priv);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
-	netif_device_attach(dev);
+	netif_device_attach(ndev);
 
-	napi_enable(&priv->napi);
+	enable_napi(priv);
 
 	return 0;
 }
+
+static int gfar_restore(struct device *dev)
+{
+	struct gfar_private *priv = dev_get_drvdata(dev);
+	struct net_device *ndev = priv->ndev;
+
+	if (!netif_running(ndev))
+		return 0;
+
+	gfar_init_bds(ndev);
+	init_registers(ndev);
+	gfar_set_mac_address(ndev);
+	gfar_init_mac(ndev);
+	gfar_start(ndev);
+
+	priv->oldlink = 0;
+	priv->oldspeed = 0;
+	priv->oldduplex = -1;
+
+	if (priv->phydev)
+		phy_start(priv->phydev);
+
+	netif_device_attach(ndev);
+	napi_enable(&priv->gfargrp.napi);
+
+	return 0;
+}
+
+static struct dev_pm_ops gfar_pm_ops = {
+	.suspend = gfar_suspend,
+	.resume = gfar_resume,
+	.freeze = gfar_suspend,
+	.thaw = gfar_resume,
+	.restore = gfar_restore,
+};
+
+#define GFAR_PM_OPS (&gfar_pm_ops)
+
+static int gfar_legacy_suspend(struct of_device *ofdev, pm_message_t state)
+{
+	return gfar_suspend(&ofdev->dev);
+}
+
+static int gfar_legacy_resume(struct of_device *ofdev)
+{
+	return gfar_resume(&ofdev->dev);
+}
+
 #else
-#define gfar_suspend NULL
-#define gfar_resume NULL
+
+#define GFAR_PM_OPS NULL
+#define gfar_legacy_suspend NULL
+#define gfar_legacy_resume NULL
+
 #endif
 
 /* Reads the controller's registers to determine what interface
@@ -597,7 +1284,10 @@
 static phy_interface_t gfar_get_interface(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 ecntrl = gfar_read(&priv->regs->ecntrl);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 ecntrl;
+
+	ecntrl = gfar_read(&regs->ecntrl);
 
 	if (ecntrl & ECNTRL_SGMII_MODE)
 		return PHY_INTERFACE_MODE_SGMII;
@@ -719,46 +1409,52 @@
 static void init_registers(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = NULL;
+	int i = 0;
 
-	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, IEVENT_INIT_CLEAR);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Clear IEVENT */
+		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
 
-	/* Initialize IMASK */
-	gfar_write(&priv->regs->imask, IMASK_INIT_CLEAR);
+		/* Initialize IMASK */
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	}
 
+	regs = priv->gfargrp[0].regs;
 	/* Init hash registers to zero */
-	gfar_write(&priv->regs->igaddr0, 0);
-	gfar_write(&priv->regs->igaddr1, 0);
-	gfar_write(&priv->regs->igaddr2, 0);
-	gfar_write(&priv->regs->igaddr3, 0);
-	gfar_write(&priv->regs->igaddr4, 0);
-	gfar_write(&priv->regs->igaddr5, 0);
-	gfar_write(&priv->regs->igaddr6, 0);
-	gfar_write(&priv->regs->igaddr7, 0);
+	gfar_write(&regs->igaddr0, 0);
+	gfar_write(&regs->igaddr1, 0);
+	gfar_write(&regs->igaddr2, 0);
+	gfar_write(&regs->igaddr3, 0);
+	gfar_write(&regs->igaddr4, 0);
+	gfar_write(&regs->igaddr5, 0);
+	gfar_write(&regs->igaddr6, 0);
+	gfar_write(&regs->igaddr7, 0);
 
-	gfar_write(&priv->regs->gaddr0, 0);
-	gfar_write(&priv->regs->gaddr1, 0);
-	gfar_write(&priv->regs->gaddr2, 0);
-	gfar_write(&priv->regs->gaddr3, 0);
-	gfar_write(&priv->regs->gaddr4, 0);
-	gfar_write(&priv->regs->gaddr5, 0);
-	gfar_write(&priv->regs->gaddr6, 0);
-	gfar_write(&priv->regs->gaddr7, 0);
+	gfar_write(&regs->gaddr0, 0);
+	gfar_write(&regs->gaddr1, 0);
+	gfar_write(&regs->gaddr2, 0);
+	gfar_write(&regs->gaddr3, 0);
+	gfar_write(&regs->gaddr4, 0);
+	gfar_write(&regs->gaddr5, 0);
+	gfar_write(&regs->gaddr6, 0);
+	gfar_write(&regs->gaddr7, 0);
 
 	/* Zero out the rmon mib registers if it has them */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		memset_io(&(priv->regs->rmon), 0, sizeof (struct rmon_mib));
+		memset_io(&(regs->rmon), 0, sizeof (struct rmon_mib));
 
 		/* Mask off the CAM interrupts */
-		gfar_write(&priv->regs->rmon.cam1, 0xffffffff);
-		gfar_write(&priv->regs->rmon.cam2, 0xffffffff);
+		gfar_write(&regs->rmon.cam1, 0xffffffff);
+		gfar_write(&regs->rmon.cam2, 0xffffffff);
 	}
 
 	/* Initialize the max receive buffer length */
-	gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
+	gfar_write(&regs->mrblr, priv->rx_buffer_size);
 
 	/* Initialize the Minimum Frame Length Register */
-	gfar_write(&priv->regs->minflr, MINFLR_INIT_SETTINGS);
+	gfar_write(&regs->minflr, MINFLR_INIT_SETTINGS);
 }
 
 
@@ -766,23 +1462,28 @@
 static void gfar_halt_nodisable(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = NULL;
 	u32 tempval;
+	int i = 0;
 
-	/* Mask all interrupts */
-	gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Mask all interrupts */
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
 
-	/* Clear all interrupts */
-	gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+		/* Clear all interrupts */
+		gfar_write(&regs->ievent, IEVENT_INIT_CLEAR);
+	}
 
+	regs = priv->gfargrp[0].regs;
 	/* Stop the DMA, and wait for it to stop */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	if ((tempval & (DMACTRL_GRS | DMACTRL_GTS))
 	    != (DMACTRL_GRS | DMACTRL_GTS)) {
 		tempval |= (DMACTRL_GRS | DMACTRL_GTS);
-		gfar_write(&priv->regs->dmactrl, tempval);
+		gfar_write(&regs->dmactrl, tempval);
 
-		while (!(gfar_read(&priv->regs->ievent) &
+		while (!(gfar_read(&regs->ievent) &
 			 (IEVENT_GRSC | IEVENT_GTSC)))
 			cpu_relax();
 	}
@@ -792,7 +1493,7 @@
 void gfar_halt(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
 	gfar_halt_nodisable(dev);
@@ -803,101 +1504,131 @@
 	gfar_write(&regs->maccfg1, tempval);
 }
 
+static void free_grp_irqs(struct gfar_priv_grp *grp)
+{
+	free_irq(grp->interruptError, grp);
+	free_irq(grp->interruptTransmit, grp);
+	free_irq(grp->interruptReceive, grp);
+}
+
 void stop_gfar(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
 	unsigned long flags;
+	int i;
 
 	phy_stop(priv->phydev);
 
+
 	/* Lock it down */
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+	lock_rx_qs(priv);
 
 	gfar_halt(dev);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_rx_qs(priv);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	/* Free the IRQs */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		free_irq(priv->interruptError, dev);
-		free_irq(priv->interruptTransmit, dev);
-		free_irq(priv->interruptReceive, dev);
+		for (i = 0; i < priv->num_grps; i++)
+			free_grp_irqs(&priv->gfargrp[i]);
 	} else {
-		free_irq(priv->interruptTransmit, dev);
+		for (i = 0; i < priv->num_grps; i++)
+			free_irq(priv->gfargrp[i].interruptTransmit,
+					&priv->gfargrp[i]);
 	}
 
 	free_skb_resources(priv);
+}
 
-	dma_free_coherent(&priv->ofdev->dev,
-			sizeof(struct txbd8)*priv->tx_ring_size
-			+ sizeof(struct rxbd8)*priv->rx_ring_size,
-			priv->tx_bd_base,
-			gfar_read(&regs->tbase0));
+static void free_skb_tx_queue(struct gfar_priv_tx_q *tx_queue)
+{
+	struct txbd8 *txbdp;
+	struct gfar_private *priv = netdev_priv(tx_queue->dev);
+	int i, j;
+
+	txbdp = tx_queue->tx_bd_base;
+
+	for (i = 0; i < tx_queue->tx_ring_size; i++) {
+		if (!tx_queue->tx_skbuff[i])
+			continue;
+
+		dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr,
+				txbdp->length, DMA_TO_DEVICE);
+		txbdp->lstatus = 0;
+		for (j = 0; j < skb_shinfo(tx_queue->tx_skbuff[i])->nr_frags;
+				j++) {
+			txbdp++;
+			dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr,
+					txbdp->length, DMA_TO_DEVICE);
+		}
+		txbdp++;
+		dev_kfree_skb_any(tx_queue->tx_skbuff[i]);
+		tx_queue->tx_skbuff[i] = NULL;
+	}
+	kfree(tx_queue->tx_skbuff);
+}
+
+static void free_skb_rx_queue(struct gfar_priv_rx_q *rx_queue)
+{
+	struct rxbd8 *rxbdp;
+	struct gfar_private *priv = netdev_priv(rx_queue->dev);
+	int i;
+
+	rxbdp = rx_queue->rx_bd_base;
+
+	for (i = 0; i < rx_queue->rx_ring_size; i++) {
+		if (rx_queue->rx_skbuff[i]) {
+			dma_unmap_single(&priv->ofdev->dev,
+					rxbdp->bufPtr, priv->rx_buffer_size,
+					DMA_FROM_DEVICE);
+			dev_kfree_skb_any(rx_queue->rx_skbuff[i]);
+			rx_queue->rx_skbuff[i] = NULL;
+		}
+		rxbdp->lstatus = 0;
+		rxbdp->bufPtr = 0;
+		rxbdp++;
+	}
+	kfree(rx_queue->rx_skbuff);
 }
 
 /* If there are any tx skbs or rx skbs still around, free them.
  * Then free tx_skbuff and rx_skbuff */
 static void free_skb_resources(struct gfar_private *priv)
 {
-	struct rxbd8 *rxbdp;
-	struct txbd8 *txbdp;
-	int i, j;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	int i;
 
 	/* Go through all the buffer descriptors and free their data buffers */
-	txbdp = priv->tx_bd_base;
-
-	for (i = 0; i < priv->tx_ring_size; i++) {
-		if (!priv->tx_skbuff[i])
-			continue;
-
-		dma_unmap_single(&priv->ofdev->dev, txbdp->bufPtr,
-				txbdp->length, DMA_TO_DEVICE);
-		txbdp->lstatus = 0;
-		for (j = 0; j < skb_shinfo(priv->tx_skbuff[i])->nr_frags; j++) {
-			txbdp++;
-			dma_unmap_page(&priv->ofdev->dev, txbdp->bufPtr,
-					txbdp->length, DMA_TO_DEVICE);
-		}
-		txbdp++;
-		dev_kfree_skb_any(priv->tx_skbuff[i]);
-		priv->tx_skbuff[i] = NULL;
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		tx_queue = priv->tx_queue[i];
+		if(!tx_queue->tx_skbuff)
+			free_skb_tx_queue(tx_queue);
 	}
 
-	kfree(priv->tx_skbuff);
-
-	rxbdp = priv->rx_bd_base;
-
-	/* rx_skbuff is not guaranteed to be allocated, so only
-	 * free it and its contents if it is allocated */
-	if(priv->rx_skbuff != NULL) {
-		for (i = 0; i < priv->rx_ring_size; i++) {
-			if (priv->rx_skbuff[i]) {
-				dma_unmap_single(&priv->ofdev->dev, rxbdp->bufPtr,
-						priv->rx_buffer_size,
-						DMA_FROM_DEVICE);
-
-				dev_kfree_skb_any(priv->rx_skbuff[i]);
-				priv->rx_skbuff[i] = NULL;
-			}
-
-			rxbdp->lstatus = 0;
-			rxbdp->bufPtr = 0;
-
-			rxbdp++;
-		}
-
-		kfree(priv->rx_skbuff);
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		rx_queue = priv->rx_queue[i];
+		if(!rx_queue->rx_skbuff)
+			free_skb_rx_queue(rx_queue);
 	}
+
+	dma_free_coherent(&priv->ofdev->dev,
+			sizeof(struct txbd8) * priv->total_tx_ring_size +
+			sizeof(struct rxbd8) * priv->total_rx_ring_size,
+			priv->tx_queue[0]->tx_bd_base,
+			priv->tx_queue[0]->tx_bd_dma_base);
 }
 
 void gfar_start(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
+	int i = 0;
 
 	/* Enable Rx and Tx in MACCFG1 */
 	tempval = gfar_read(&regs->maccfg1);
@@ -905,269 +1636,159 @@
 	gfar_write(&regs->maccfg1, tempval);
 
 	/* Initialize DMACTRL to have WWR and WOP */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	tempval |= DMACTRL_INIT_SETTINGS;
-	gfar_write(&priv->regs->dmactrl, tempval);
+	gfar_write(&regs->dmactrl, tempval);
 
 	/* Make sure we aren't stopped */
-	tempval = gfar_read(&priv->regs->dmactrl);
+	tempval = gfar_read(&regs->dmactrl);
 	tempval &= ~(DMACTRL_GRS | DMACTRL_GTS);
-	gfar_write(&priv->regs->dmactrl, tempval);
+	gfar_write(&regs->dmactrl, tempval);
 
-	/* Clear THLT/RHLT, so that the DMA starts polling now */
-	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT);
-	gfar_write(&regs->rstat, RSTAT_CLEAR_RHALT);
-
-	/* Unmask the interrupts we look for */
-	gfar_write(&regs->imask, IMASK_DEFAULT);
+	for (i = 0; i < priv->num_grps; i++) {
+		regs = priv->gfargrp[i].regs;
+		/* Clear THLT/RHLT, so that the DMA starts polling now */
+		gfar_write(&regs->tstat, priv->gfargrp[i].tstat);
+		gfar_write(&regs->rstat, priv->gfargrp[i].rstat);
+		/* Unmask the interrupts we look for */
+		gfar_write(&regs->imask, IMASK_DEFAULT);
+	}
 
 	dev->trans_start = jiffies;
 }
 
-/* Bring the controller up and running */
-int startup_gfar(struct net_device *dev)
+void gfar_configure_coalescing(struct gfar_private *priv,
+	unsigned int tx_mask, unsigned int rx_mask)
 {
-	struct txbd8 *txbdp;
-	struct rxbd8 *rxbdp;
-	dma_addr_t addr = 0;
-	unsigned long vaddr;
-	int i;
-	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
-	int err = 0;
-	u32 rctrl = 0;
-	u32 tctrl = 0;
-	u32 attrs = 0;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+	u32 *baddr;
+	int i = 0;
 
-	gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	/* Backward compatible case ---- even if we enable
+	 * multiple queues, there's only single reg to program
+	 */
+	gfar_write(&regs->txic, 0);
+	if(likely(priv->tx_queue[0]->txcoalescing))
+		gfar_write(&regs->txic, priv->tx_queue[0]->txic);
 
-	/* Allocate memory for the buffer descriptors */
-	vaddr = (unsigned long) dma_alloc_coherent(&priv->ofdev->dev,
-			sizeof (struct txbd8) * priv->tx_ring_size +
-			sizeof (struct rxbd8) * priv->rx_ring_size,
-			&addr, GFP_KERNEL);
+	gfar_write(&regs->rxic, 0);
+	if(unlikely(priv->rx_queue[0]->rxcoalescing))
+		gfar_write(&regs->rxic, priv->rx_queue[0]->rxic);
 
-	if (vaddr == 0) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate buffer descriptors!\n",
-					dev->name);
-		return -ENOMEM;
-	}
-
-	priv->tx_bd_base = (struct txbd8 *) vaddr;
-
-	/* enet DMA only understands physical addresses */
-	gfar_write(&regs->tbase0, addr);
-
-	/* Start the rx descriptor ring where the tx ring leaves off */
-	addr = addr + sizeof (struct txbd8) * priv->tx_ring_size;
-	vaddr = vaddr + sizeof (struct txbd8) * priv->tx_ring_size;
-	priv->rx_bd_base = (struct rxbd8 *) vaddr;
-	gfar_write(&regs->rbase0, addr);
-
-	/* Setup the skbuff rings */
-	priv->tx_skbuff =
-	    (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
-					priv->tx_ring_size, GFP_KERNEL);
-
-	if (NULL == priv->tx_skbuff) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate tx_skbuff\n",
-					dev->name);
-		err = -ENOMEM;
-		goto tx_skb_fail;
-	}
-
-	for (i = 0; i < priv->tx_ring_size; i++)
-		priv->tx_skbuff[i] = NULL;
-
-	priv->rx_skbuff =
-	    (struct sk_buff **) kmalloc(sizeof (struct sk_buff *) *
-					priv->rx_ring_size, GFP_KERNEL);
-
-	if (NULL == priv->rx_skbuff) {
-		if (netif_msg_ifup(priv))
-			printk(KERN_ERR "%s: Could not allocate rx_skbuff\n",
-					dev->name);
-		err = -ENOMEM;
-		goto rx_skb_fail;
-	}
-
-	for (i = 0; i < priv->rx_ring_size; i++)
-		priv->rx_skbuff[i] = NULL;
-
-	/* Initialize some variables in our dev structure */
-	priv->num_txbdfree = priv->tx_ring_size;
-	priv->dirty_tx = priv->cur_tx = priv->tx_bd_base;
-	priv->cur_rx = priv->rx_bd_base;
-	priv->skb_curtx = priv->skb_dirtytx = 0;
-	priv->skb_currx = 0;
-
-	/* Initialize Transmit Descriptor Ring */
-	txbdp = priv->tx_bd_base;
-	for (i = 0; i < priv->tx_ring_size; i++) {
-		txbdp->lstatus = 0;
-		txbdp->bufPtr = 0;
-		txbdp++;
-	}
-
-	/* Set the last descriptor in the ring to indicate wrap */
-	txbdp--;
-	txbdp->status |= TXBD_WRAP;
-
-	rxbdp = priv->rx_bd_base;
-	for (i = 0; i < priv->rx_ring_size; i++) {
-		struct sk_buff *skb;
-
-		skb = gfar_new_skb(dev);
-
-		if (!skb) {
-			printk(KERN_ERR "%s: Can't allocate RX buffers\n",
-					dev->name);
-
-			goto err_rxalloc_fail;
+	if (priv->mode == MQ_MG_MODE) {
+		baddr = &regs->txic0;
+		for_each_bit (i, &tx_mask, priv->num_tx_queues) {
+			if (likely(priv->tx_queue[i]->txcoalescing)) {
+				gfar_write(baddr + i, 0);
+				gfar_write(baddr + i, priv->tx_queue[i]->txic);
+			}
 		}
 
-		priv->rx_skbuff[i] = skb;
-
-		gfar_new_rxbdp(dev, rxbdp, skb);
-
-		rxbdp++;
+		baddr = &regs->rxic0;
+		for_each_bit (i, &rx_mask, priv->num_rx_queues) {
+			if (likely(priv->rx_queue[i]->rxcoalescing)) {
+				gfar_write(baddr + i, 0);
+				gfar_write(baddr + i, priv->rx_queue[i]->rxic);
+			}
+		}
 	}
+}
 
-	/* Set the last descriptor in the ring to wrap */
-	rxbdp--;
-	rxbdp->status |= RXBD_WRAP;
+static int register_grp_irqs(struct gfar_priv_grp *grp)
+{
+	struct gfar_private *priv = grp->priv;
+	struct net_device *dev = priv->ndev;
+	int err;
 
 	/* If the device has multiple interrupts, register for
 	 * them.  Otherwise, only register for the one */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
 		/* Install our interrupt handlers for Error,
 		 * Transmit, and Receive */
-		if (request_irq(priv->interruptError, gfar_error,
-				0, priv->int_name_er, dev) < 0) {
+		if ((err = request_irq(grp->interruptError, gfar_error, 0,
+				grp->int_name_er,grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptError);
+					dev->name, grp->interruptError);
 
-			err = -1;
-			goto err_irq_fail;
+				goto err_irq_fail;
 		}
 
-		if (request_irq(priv->interruptTransmit, gfar_transmit,
-				0, priv->int_name_tx, dev) < 0) {
+		if ((err = request_irq(grp->interruptTransmit, gfar_transmit,
+				0, grp->int_name_tx, grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptTransmit);
-
-			err = -1;
-
+					dev->name, grp->interruptTransmit);
 			goto tx_irq_fail;
 		}
 
-		if (request_irq(priv->interruptReceive, gfar_receive,
-				0, priv->int_name_rx, dev) < 0) {
+		if ((err = request_irq(grp->interruptReceive, gfar_receive, 0,
+				grp->int_name_rx, grp)) < 0) {
 			if (netif_msg_intr(priv))
-				printk(KERN_ERR "%s: Can't get IRQ %d (receive0)\n",
-						dev->name, priv->interruptReceive);
-
-			err = -1;
+				printk(KERN_ERR "%s: Can't get IRQ %d\n",
+					dev->name, grp->interruptReceive);
 			goto rx_irq_fail;
 		}
 	} else {
-		if (request_irq(priv->interruptTransmit, gfar_interrupt,
-				0, priv->int_name_tx, dev) < 0) {
+		if ((err = request_irq(grp->interruptTransmit, gfar_interrupt, 0,
+				grp->int_name_tx, grp)) < 0) {
 			if (netif_msg_intr(priv))
 				printk(KERN_ERR "%s: Can't get IRQ %d\n",
-					dev->name, priv->interruptTransmit);
-
-			err = -1;
+					dev->name, grp->interruptTransmit);
 			goto err_irq_fail;
 		}
 	}
 
-	phy_start(priv->phydev);
-
-	/* Configure the coalescing support */
-	gfar_write(&regs->txic, 0);
-	if (priv->txcoalescing)
-		gfar_write(&regs->txic, priv->txic);
-
-	gfar_write(&regs->rxic, 0);
-	if (priv->rxcoalescing)
-		gfar_write(&regs->rxic, priv->rxic);
-
-	if (priv->rx_csum_enable)
-		rctrl |= RCTRL_CHECKSUMMING;
-
-	if (priv->extended_hash) {
-		rctrl |= RCTRL_EXTHASH;
-
-		gfar_clear_exact_match(dev);
-		rctrl |= RCTRL_EMEN;
-	}
-
-	if (priv->padding) {
-		rctrl &= ~RCTRL_PAL_MASK;
-		rctrl |= RCTRL_PADDING(priv->padding);
-	}
-
-	/* keep vlan related bits if it's enabled */
-	if (priv->vlgrp) {
-		rctrl |= RCTRL_VLEX | RCTRL_PRSDEP_INIT;
-		tctrl |= TCTRL_VLINS;
-	}
-
-	/* Init rctrl based on our settings */
-	gfar_write(&priv->regs->rctrl, rctrl);
-
-	if (dev->features & NETIF_F_IP_CSUM)
-		tctrl |= TCTRL_INIT_CSUM;
-
-	gfar_write(&priv->regs->tctrl, tctrl);
-
-	/* Set the extraction length and index */
-	attrs = ATTRELI_EL(priv->rx_stash_size) |
-		ATTRELI_EI(priv->rx_stash_index);
-
-	gfar_write(&priv->regs->attreli, attrs);
-
-	/* Start with defaults, and add stashing or locking
-	 * depending on the approprate variables */
-	attrs = ATTR_INIT_SETTINGS;
-
-	if (priv->bd_stash_en)
-		attrs |= ATTR_BDSTASH;
-
-	if (priv->rx_stash_size != 0)
-		attrs |= ATTR_BUFSTASH;
-
-	gfar_write(&priv->regs->attr, attrs);
-
-	gfar_write(&priv->regs->fifo_tx_thr, priv->fifo_threshold);
-	gfar_write(&priv->regs->fifo_tx_starve, priv->fifo_starve);
-	gfar_write(&priv->regs->fifo_tx_starve_shutoff, priv->fifo_starve_off);
-
-	/* Start the controller */
-	gfar_start(dev);
-
 	return 0;
 
 rx_irq_fail:
-	free_irq(priv->interruptTransmit, dev);
+	free_irq(grp->interruptTransmit, grp);
 tx_irq_fail:
-	free_irq(priv->interruptError, dev);
+	free_irq(grp->interruptError, grp);
 err_irq_fail:
-err_rxalloc_fail:
-rx_skb_fail:
-	free_skb_resources(priv);
-tx_skb_fail:
-	dma_free_coherent(&priv->ofdev->dev,
-			sizeof(struct txbd8)*priv->tx_ring_size
-			+ sizeof(struct rxbd8)*priv->rx_ring_size,
-			priv->tx_bd_base,
-			gfar_read(&regs->tbase0));
+	return err;
 
+}
+
+/* Bring the controller up and running */
+int startup_gfar(struct net_device *ndev)
+{
+	struct gfar_private *priv = netdev_priv(ndev);
+	struct gfar __iomem *regs = NULL;
+	int err, i, j;
+
+	for (i = 0; i < priv->num_grps; i++) {
+		regs= priv->gfargrp[i].regs;
+		gfar_write(&regs->imask, IMASK_INIT_CLEAR);
+	}
+
+	regs= priv->gfargrp[0].regs;
+	err = gfar_alloc_skb_resources(ndev);
+	if (err)
+		return err;
+
+	gfar_init_mac(ndev);
+
+	for (i = 0; i < priv->num_grps; i++) {
+		err = register_grp_irqs(&priv->gfargrp[i]);
+		if (err) {
+			for (j = 0; j < i; j++)
+				free_grp_irqs(&priv->gfargrp[j]);
+				goto irq_fail;
+		}
+	}
+
+	/* Start the controller */
+	gfar_start(ndev);
+
+	phy_start(priv->phydev);
+
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
+
+	return 0;
+
+irq_fail:
+	free_skb_resources(priv);
 	return err;
 }
 
@@ -1178,7 +1799,7 @@
 	struct gfar_private *priv = netdev_priv(dev);
 	int err;
 
-	napi_enable(&priv->napi);
+	enable_napi(priv);
 
 	skb_queue_head_init(&priv->rx_recycle);
 
@@ -1189,18 +1810,18 @@
 
 	err = init_phy(dev);
 
-	if(err) {
-		napi_disable(&priv->napi);
+	if (err) {
+		disable_napi(priv);
 		return err;
 	}
 
 	err = startup_gfar(dev);
 	if (err) {
-		napi_disable(&priv->napi);
+		disable_napi(priv);
 		return err;
 	}
 
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 
 	device_set_wakeup_enable(&dev->dev, priv->wol_en);
 
@@ -1269,15 +1890,23 @@
 static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct netdev_queue *txq;
+	struct gfar __iomem *regs = NULL;
 	struct txfcb *fcb = NULL;
 	struct txbd8 *txbdp, *txbdp_start, *base;
 	u32 lstatus;
-	int i;
+	int i, rq = 0;
 	u32 bufaddr;
 	unsigned long flags;
 	unsigned int nr_frags, length;
 
-	base = priv->tx_bd_base;
+
+	rq = skb->queue_mapping;
+	tx_queue = priv->tx_queue[rq];
+	txq = netdev_get_tx_queue(dev, rq);
+	base = tx_queue->tx_bd_base;
+	regs = tx_queue->grp->regs;
 
 	/* make space for additional header when fcb is needed */
 	if (((skb->ip_summed == CHECKSUM_PARTIAL) ||
@@ -1298,21 +1927,21 @@
 	/* total number of fragments in the SKB */
 	nr_frags = skb_shinfo(skb)->nr_frags;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	spin_lock_irqsave(&tx_queue->txlock, flags);
 
 	/* check if there is space to queue this packet */
-	if ((nr_frags+1) > priv->num_txbdfree) {
+	if ((nr_frags+1) > tx_queue->num_txbdfree) {
 		/* no space, stop the queue */
-		netif_stop_queue(dev);
+		netif_tx_stop_queue(txq);
 		dev->stats.tx_fifo_errors++;
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		spin_unlock_irqrestore(&tx_queue->txlock, flags);
 		return NETDEV_TX_BUSY;
 	}
 
 	/* Update transmit stats */
 	dev->stats.tx_bytes += skb->len;
 
-	txbdp = txbdp_start = priv->cur_tx;
+	txbdp = txbdp_start = tx_queue->cur_tx;
 
 	if (nr_frags == 0) {
 		lstatus = txbdp->lstatus | BD_LFLAG(TXBD_LAST | TXBD_INTERRUPT);
@@ -1320,7 +1949,7 @@
 		/* Place the fragment addresses and lengths into the TxBDs */
 		for (i = 0; i < nr_frags; i++) {
 			/* Point at the next BD, wrapping as needed */
-			txbdp = next_txbd(txbdp, base, priv->tx_ring_size);
+			txbdp = next_txbd(txbdp, base, tx_queue->tx_ring_size);
 
 			length = skb_shinfo(skb)->frags[i].size;
 
@@ -1362,7 +1991,7 @@
 	}
 
 	/* setup the TxBD length and buffer pointer for the first BD */
-	priv->tx_skbuff[priv->skb_curtx] = skb;
+	tx_queue->tx_skbuff[tx_queue->skb_curtx] = skb;
 	txbdp_start->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
 			skb_headlen(skb), DMA_TO_DEVICE);
 
@@ -1382,29 +2011,29 @@
 
 	/* Update the current skb pointer to the next entry we will use
 	 * (wrapping if necessary) */
-	priv->skb_curtx = (priv->skb_curtx + 1) &
-		TX_RING_MOD_MASK(priv->tx_ring_size);
+	tx_queue->skb_curtx = (tx_queue->skb_curtx + 1) &
+		TX_RING_MOD_MASK(tx_queue->tx_ring_size);
 
-	priv->cur_tx = next_txbd(txbdp, base, priv->tx_ring_size);
+	tx_queue->cur_tx = next_txbd(txbdp, base, tx_queue->tx_ring_size);
 
 	/* reduce TxBD free count */
-	priv->num_txbdfree -= (nr_frags + 1);
+	tx_queue->num_txbdfree -= (nr_frags + 1);
 
 	dev->trans_start = jiffies;
 
 	/* If the next BD still needs to be cleaned up, then the bds
 	   are full.  We need to tell the kernel to stop sending us stuff. */
-	if (!priv->num_txbdfree) {
-		netif_stop_queue(dev);
+	if (!tx_queue->num_txbdfree) {
+		netif_tx_stop_queue(txq);
 
 		dev->stats.tx_fifo_errors++;
 	}
 
 	/* Tell the DMA to go go go */
-	gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
+	gfar_write(&regs->tstat, TSTAT_CLEAR_THALT >> tx_queue->qindex);
 
 	/* Unlock priv */
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	spin_unlock_irqrestore(&tx_queue->txlock, flags);
 
 	return NETDEV_TX_OK;
 }
@@ -1414,7 +2043,7 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 
-	napi_disable(&priv->napi);
+	disable_napi(priv);
 
 	skb_queue_purge(&priv->rx_recycle);
 	cancel_work_sync(&priv->reset_task);
@@ -1424,7 +2053,7 @@
 	phy_disconnect(priv->phydev);
 	priv->phydev = NULL;
 
-	netif_stop_queue(dev);
+	netif_tx_stop_all_queues(dev);
 
 	return 0;
 }
@@ -1443,50 +2072,55 @@
 		struct vlan_group *grp)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = NULL;
 	unsigned long flags;
 	u32 tempval;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	regs = priv->gfargrp[0].regs;
+	local_irq_save(flags);
+	lock_rx_qs(priv);
 
 	priv->vlgrp = grp;
 
 	if (grp) {
 		/* Enable VLAN tag insertion */
-		tempval = gfar_read(&priv->regs->tctrl);
+		tempval = gfar_read(&regs->tctrl);
 		tempval |= TCTRL_VLINS;
 
-		gfar_write(&priv->regs->tctrl, tempval);
+		gfar_write(&regs->tctrl, tempval);
 
 		/* Enable VLAN tag extraction */
-		tempval = gfar_read(&priv->regs->rctrl);
+		tempval = gfar_read(&regs->rctrl);
 		tempval |= (RCTRL_VLEX | RCTRL_PRSDEP_INIT);
-		gfar_write(&priv->regs->rctrl, tempval);
+		gfar_write(&regs->rctrl, tempval);
 	} else {
 		/* Disable VLAN tag insertion */
-		tempval = gfar_read(&priv->regs->tctrl);
+		tempval = gfar_read(&regs->tctrl);
 		tempval &= ~TCTRL_VLINS;
-		gfar_write(&priv->regs->tctrl, tempval);
+		gfar_write(&regs->tctrl, tempval);
 
 		/* Disable VLAN tag extraction */
-		tempval = gfar_read(&priv->regs->rctrl);
+		tempval = gfar_read(&regs->rctrl);
 		tempval &= ~RCTRL_VLEX;
 		/* If parse is no longer required, then disable parser */
 		if (tempval & RCTRL_REQ_PARSER)
 			tempval |= RCTRL_PRSDEP_INIT;
 		else
 			tempval &= ~RCTRL_PRSDEP_INIT;
-		gfar_write(&priv->regs->rctrl, tempval);
+		gfar_write(&regs->rctrl, tempval);
 	}
 
 	gfar_change_mtu(dev, dev->mtu);
 
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 }
 
 static int gfar_change_mtu(struct net_device *dev, int new_mtu)
 {
 	int tempsize, tempval;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int oldsize = priv->rx_buffer_size;
 	int frame_size = new_mtu + ETH_HLEN;
 
@@ -1518,20 +2152,20 @@
 
 	dev->mtu = new_mtu;
 
-	gfar_write(&priv->regs->mrblr, priv->rx_buffer_size);
-	gfar_write(&priv->regs->maxfrm, priv->rx_buffer_size);
+	gfar_write(&regs->mrblr, priv->rx_buffer_size);
+	gfar_write(&regs->maxfrm, priv->rx_buffer_size);
 
 	/* If the mtu is larger than the max size for standard
 	 * ethernet frames (ie, a jumbo frame), then set maccfg2
 	 * to allow huge frames, and to check the length */
-	tempval = gfar_read(&priv->regs->maccfg2);
+	tempval = gfar_read(&regs->maccfg2);
 
 	if (priv->rx_buffer_size > DEFAULT_RX_BUFFER_SIZE)
 		tempval |= (MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
 	else
 		tempval &= ~(MACCFG2_HUGEFRAME | MACCFG2_LENGTHCHECK);
 
-	gfar_write(&priv->regs->maccfg2, tempval);
+	gfar_write(&regs->maccfg2, tempval);
 
 	if ((oldsize != tempsize) && (dev->flags & IFF_UP))
 		startup_gfar(dev);
@@ -1551,10 +2185,10 @@
 	struct net_device *dev = priv->ndev;
 
 	if (dev->flags & IFF_UP) {
-		netif_stop_queue(dev);
+		netif_tx_stop_all_queues(dev);
 		stop_gfar(dev);
 		startup_gfar(dev);
-		netif_start_queue(dev);
+		netif_tx_start_all_queues(dev);
 	}
 
 	netif_tx_schedule_all(dev);
@@ -1569,24 +2203,27 @@
 }
 
 /* Interrupt Handler for Transmit complete */
-static int gfar_clean_tx_ring(struct net_device *dev)
+static int gfar_clean_tx_ring(struct gfar_priv_tx_q *tx_queue)
 {
+	struct net_device *dev = tx_queue->dev;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_rx_q *rx_queue = NULL;
 	struct txbd8 *bdp;
 	struct txbd8 *lbdp = NULL;
-	struct txbd8 *base = priv->tx_bd_base;
+	struct txbd8 *base = tx_queue->tx_bd_base;
 	struct sk_buff *skb;
 	int skb_dirtytx;
-	int tx_ring_size = priv->tx_ring_size;
+	int tx_ring_size = tx_queue->tx_ring_size;
 	int frags = 0;
 	int i;
 	int howmany = 0;
 	u32 lstatus;
 
-	bdp = priv->dirty_tx;
-	skb_dirtytx = priv->skb_dirtytx;
+	rx_queue = priv->rx_queue[tx_queue->qindex];
+	bdp = tx_queue->dirty_tx;
+	skb_dirtytx = tx_queue->skb_dirtytx;
 
-	while ((skb = priv->tx_skbuff[skb_dirtytx])) {
+	while ((skb = tx_queue->tx_skbuff[skb_dirtytx])) {
 		frags = skb_shinfo(skb)->nr_frags;
 		lbdp = skip_txbd(bdp, frags, base, tx_ring_size);
 
@@ -1618,82 +2255,71 @@
 		 * If there's room in the queue (limit it to rx_buffer_size)
 		 * we add this skb back into the pool, if it's the right size
 		 */
-		if (skb_queue_len(&priv->rx_recycle) < priv->rx_ring_size &&
+		if (skb_queue_len(&priv->rx_recycle) < rx_queue->rx_ring_size &&
 				skb_recycle_check(skb, priv->rx_buffer_size +
 					RXBUF_ALIGNMENT))
 			__skb_queue_head(&priv->rx_recycle, skb);
 		else
 			dev_kfree_skb_any(skb);
 
-		priv->tx_skbuff[skb_dirtytx] = NULL;
+		tx_queue->tx_skbuff[skb_dirtytx] = NULL;
 
 		skb_dirtytx = (skb_dirtytx + 1) &
 			TX_RING_MOD_MASK(tx_ring_size);
 
 		howmany++;
-		priv->num_txbdfree += frags + 1;
+		tx_queue->num_txbdfree += frags + 1;
 	}
 
 	/* If we freed a buffer, we can restart transmission, if necessary */
-	if (netif_queue_stopped(dev) && priv->num_txbdfree)
-		netif_wake_queue(dev);
+	if (__netif_subqueue_stopped(dev, tx_queue->qindex) && tx_queue->num_txbdfree)
+		netif_wake_subqueue(dev, tx_queue->qindex);
 
 	/* Update dirty indicators */
-	priv->skb_dirtytx = skb_dirtytx;
-	priv->dirty_tx = bdp;
+	tx_queue->skb_dirtytx = skb_dirtytx;
+	tx_queue->dirty_tx = bdp;
 
 	dev->stats.tx_packets += howmany;
 
 	return howmany;
 }
 
-static void gfar_schedule_cleanup(struct net_device *dev)
+static void gfar_schedule_cleanup(struct gfar_priv_grp *gfargrp)
 {
-	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
 
-	spin_lock_irqsave(&priv->txlock, flags);
-	spin_lock(&priv->rxlock);
-
-	if (napi_schedule_prep(&priv->napi)) {
-		gfar_write(&priv->regs->imask, IMASK_RTX_DISABLED);
-		__napi_schedule(&priv->napi);
+	spin_lock_irqsave(&gfargrp->grplock, flags);
+	if (napi_schedule_prep(&gfargrp->napi)) {
+		gfar_write(&gfargrp->regs->imask, IMASK_RTX_DISABLED);
+		__napi_schedule(&gfargrp->napi);
 	} else {
 		/*
 		 * Clear IEVENT, so interrupts aren't called again
 		 * because of the packets that have already arrived.
 		 */
-		gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+		gfar_write(&gfargrp->regs->ievent, IEVENT_RTX_MASK);
 	}
+	spin_unlock_irqrestore(&gfargrp->grplock, flags);
 
-	spin_unlock(&priv->rxlock);
-	spin_unlock_irqrestore(&priv->txlock, flags);
 }
 
 /* Interrupt Handler for Transmit complete */
-static irqreturn_t gfar_transmit(int irq, void *dev_id)
+static irqreturn_t gfar_transmit(int irq, void *grp_id)
 {
-	gfar_schedule_cleanup((struct net_device *)dev_id);
+	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
 	return IRQ_HANDLED;
 }
 
-static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
+static void gfar_new_rxbdp(struct gfar_priv_rx_q *rx_queue, struct rxbd8 *bdp,
 		struct sk_buff *skb)
 {
+	struct net_device *dev = rx_queue->dev;
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 lstatus;
+	dma_addr_t buf;
 
-	bdp->bufPtr = dma_map_single(&priv->ofdev->dev, skb->data,
-			priv->rx_buffer_size, DMA_FROM_DEVICE);
-
-	lstatus = BD_LFLAG(RXBD_EMPTY | RXBD_INTERRUPT);
-
-	if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1)
-		lstatus |= BD_LFLAG(RXBD_WRAP);
-
-	eieio();
-
-	bdp->lstatus = lstatus;
+	buf = dma_map_single(&priv->ofdev->dev, skb->data,
+			     priv->rx_buffer_size, DMA_FROM_DEVICE);
+	gfar_init_rxbdp(rx_queue, bdp, buf);
 }
 
 
@@ -1760,9 +2386,9 @@
 	}
 }
 
-irqreturn_t gfar_receive(int irq, void *dev_id)
+irqreturn_t gfar_receive(int irq, void *grp_id)
 {
-	gfar_schedule_cleanup((struct net_device *)dev_id);
+	gfar_schedule_cleanup((struct gfar_priv_grp *)grp_id);
 	return IRQ_HANDLED;
 }
 
@@ -1792,6 +2418,7 @@
 	fcb = (struct rxfcb *)skb->data;
 
 	/* Remove the FCB from the skb */
+	skb_set_queue_mapping(skb, fcb->rq);
 	/* Remove the padded bytes, if there are any */
 	if (amount_pull)
 		skb_pull(skb, amount_pull);
@@ -1818,8 +2445,9 @@
  *   until the budget/quota has been reached. Returns the number
  *   of frames handled
  */
-int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
+int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit)
 {
+	struct net_device *dev = rx_queue->dev;
 	struct rxbd8 *bdp, *base;
 	struct sk_buff *skb;
 	int pkt_len;
@@ -1828,8 +2456,8 @@
 	struct gfar_private *priv = netdev_priv(dev);
 
 	/* Get the first full descriptor */
-	bdp = priv->cur_rx;
-	base = priv->rx_bd_base;
+	bdp = rx_queue->cur_rx;
+	base = rx_queue->rx_bd_base;
 
 	amount_pull = (gfar_uses_fcb(priv) ? GMAC_FCB_LEN : 0) +
 		priv->padding;
@@ -1841,7 +2469,7 @@
 		/* Add another skb for the future */
 		newskb = gfar_new_skb(dev);
 
-		skb = priv->rx_skbuff[priv->skb_currx];
+		skb = rx_queue->rx_skbuff[rx_queue->skb_currx];
 
 		dma_unmap_single(&priv->ofdev->dev, bdp->bufPtr,
 				priv->rx_buffer_size, DMA_FROM_DEVICE);
@@ -1889,46 +2517,77 @@
 
 		}
 
-		priv->rx_skbuff[priv->skb_currx] = newskb;
+		rx_queue->rx_skbuff[rx_queue->skb_currx] = newskb;
 
 		/* Setup the new bdp */
-		gfar_new_rxbdp(dev, bdp, newskb);
+		gfar_new_rxbdp(rx_queue, bdp, newskb);
 
 		/* Update to the next pointer */
-		bdp = next_bd(bdp, base, priv->rx_ring_size);
+		bdp = next_bd(bdp, base, rx_queue->rx_ring_size);
 
 		/* update to point at the next skb */
-		priv->skb_currx =
-		    (priv->skb_currx + 1) &
-		    RX_RING_MOD_MASK(priv->rx_ring_size);
+		rx_queue->skb_currx =
+		    (rx_queue->skb_currx + 1) &
+		    RX_RING_MOD_MASK(rx_queue->rx_ring_size);
 	}
 
 	/* Update the current rxbd pointer to be the next one */
-	priv->cur_rx = bdp;
+	rx_queue->cur_rx = bdp;
 
 	return howmany;
 }
 
 static int gfar_poll(struct napi_struct *napi, int budget)
 {
-	struct gfar_private *priv = container_of(napi, struct gfar_private, napi);
-	struct net_device *dev = priv->ndev;
-	int tx_cleaned = 0;
-	int rx_cleaned = 0;
+	struct gfar_priv_grp *gfargrp = container_of(napi,
+			struct gfar_priv_grp, napi);
+	struct gfar_private *priv = gfargrp->priv;
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	int rx_cleaned = 0, budget_per_queue = 0, rx_cleaned_per_queue = 0;
+	int tx_cleaned = 0, i, left_over_budget = budget, serviced_queues = 0;
+	int num_queues = 0;
 	unsigned long flags;
 
+	num_queues = gfargrp->num_rx_queues;
+	budget_per_queue = budget/num_queues;
+
 	/* Clear IEVENT, so interrupts aren't called again
 	 * because of the packets that have already arrived */
-	gfar_write(&priv->regs->ievent, IEVENT_RTX_MASK);
+	gfar_write(&regs->ievent, IEVENT_RTX_MASK);
 
-	/* If we fail to get the lock, don't bother with the TX BDs */
-	if (spin_trylock_irqsave(&priv->txlock, flags)) {
-		tx_cleaned = gfar_clean_tx_ring(dev);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+	while (num_queues && left_over_budget) {
+
+		budget_per_queue = left_over_budget/num_queues;
+		left_over_budget = 0;
+
+		for_each_bit(i, &gfargrp->rx_bit_map, priv->num_rx_queues) {
+			if (test_bit(i, &serviced_queues))
+				continue;
+			rx_queue = priv->rx_queue[i];
+			tx_queue = priv->tx_queue[rx_queue->qindex];
+
+			/* If we fail to get the lock,
+			 * don't bother with the TX BDs */
+			if (spin_trylock_irqsave(&tx_queue->txlock, flags)) {
+				tx_cleaned += gfar_clean_tx_ring(tx_queue);
+				spin_unlock_irqrestore(&tx_queue->txlock,
+							flags);
+			}
+
+			rx_cleaned_per_queue = gfar_clean_rx_ring(rx_queue,
+							budget_per_queue);
+			rx_cleaned += rx_cleaned_per_queue;
+			if(rx_cleaned_per_queue < budget_per_queue) {
+				left_over_budget = left_over_budget +
+					(budget_per_queue - rx_cleaned_per_queue);
+				set_bit(i, &serviced_queues);
+				num_queues--;
+			}
+		}
 	}
 
-	rx_cleaned = gfar_clean_rx_ring(dev, budget);
-
 	if (tx_cleaned)
 		return budget;
 
@@ -1936,20 +2595,14 @@
 		napi_complete(napi);
 
 		/* Clear the halt bit in RSTAT */
-		gfar_write(&priv->regs->rstat, RSTAT_CLEAR_RHALT);
+		gfar_write(&regs->rstat, gfargrp->rstat);
 
-		gfar_write(&priv->regs->imask, IMASK_DEFAULT);
+		gfar_write(&regs->imask, IMASK_DEFAULT);
 
 		/* If we are coalescing interrupts, update the timer */
 		/* Otherwise, clear it */
-		if (likely(priv->rxcoalescing)) {
-			gfar_write(&priv->regs->rxic, 0);
-			gfar_write(&priv->regs->rxic, priv->rxic);
-		}
-		if (likely(priv->txcoalescing)) {
-			gfar_write(&priv->regs->txic, 0);
-			gfar_write(&priv->regs->txic, priv->txic);
-		}
+		gfar_configure_coalescing(priv,
+				gfargrp->rx_bit_map, gfargrp->tx_bit_map);
 	}
 
 	return rx_cleaned;
@@ -1964,44 +2617,49 @@
 static void gfar_netpoll(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	int i = 0;
 
 	/* If the device has multiple interrupts, run tx/rx */
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_MULTI_INTR) {
-		disable_irq(priv->interruptTransmit);
-		disable_irq(priv->interruptReceive);
-		disable_irq(priv->interruptError);
-		gfar_interrupt(priv->interruptTransmit, dev);
-		enable_irq(priv->interruptError);
-		enable_irq(priv->interruptReceive);
-		enable_irq(priv->interruptTransmit);
+		for (i = 0; i < priv->num_grps; i++) {
+			disable_irq(priv->gfargrp[i].interruptTransmit);
+			disable_irq(priv->gfargrp[i].interruptReceive);
+			disable_irq(priv->gfargrp[i].interruptError);
+			gfar_interrupt(priv->gfargrp[i].interruptTransmit,
+						&priv->gfargrp[i]);
+			enable_irq(priv->gfargrp[i].interruptError);
+			enable_irq(priv->gfargrp[i].interruptReceive);
+			enable_irq(priv->gfargrp[i].interruptTransmit);
+		}
 	} else {
-		disable_irq(priv->interruptTransmit);
-		gfar_interrupt(priv->interruptTransmit, dev);
-		enable_irq(priv->interruptTransmit);
+		for (i = 0; i < priv->num_grps; i++) {
+			disable_irq(priv->gfargrp[i].interruptTransmit);
+			gfar_interrupt(priv->gfargrp[i].interruptTransmit,
+						&priv->gfargrp[i]);
+			enable_irq(priv->gfargrp[i].interruptTransmit);
 	}
 }
 #endif
 
 /* The interrupt handler for devices with one interrupt */
-static irqreturn_t gfar_interrupt(int irq, void *dev_id)
+static irqreturn_t gfar_interrupt(int irq, void *grp_id)
 {
-	struct net_device *dev = dev_id;
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_grp *gfargrp = grp_id;
 
 	/* Save ievent for future reference */
-	u32 events = gfar_read(&priv->regs->ievent);
+	u32 events = gfar_read(&gfargrp->regs->ievent);
 
 	/* Check for reception */
 	if (events & IEVENT_RX_MASK)
-		gfar_receive(irq, dev_id);
+		gfar_receive(irq, grp_id);
 
 	/* Check for transmit completion */
 	if (events & IEVENT_TX_MASK)
-		gfar_transmit(irq, dev_id);
+		gfar_transmit(irq, grp_id);
 
 	/* Check for errors */
 	if (events & IEVENT_ERR_MASK)
-		gfar_error(irq, dev_id);
+		gfar_error(irq, grp_id);
 
 	return IRQ_HANDLED;
 }
@@ -2015,12 +2673,14 @@
 static void adjust_link(struct net_device *dev)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned long flags;
 	struct phy_device *phydev = priv->phydev;
 	int new_state = 0;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
+
 	if (phydev->link) {
 		u32 tempval = gfar_read(&regs->maccfg2);
 		u32 ecntrl = gfar_read(&regs->ecntrl);
@@ -2085,8 +2745,8 @@
 
 	if (new_state && netif_msg_link(priv))
 		phy_print_status(phydev);
-
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 }
 
 /* Update the hash table based on the current list of multicast
@@ -2097,10 +2757,10 @@
 {
 	struct dev_mc_list *mc_ptr;
 	struct gfar_private *priv = netdev_priv(dev);
-	struct gfar __iomem *regs = priv->regs;
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u32 tempval;
 
-	if(dev->flags & IFF_PROMISC) {
+	if (dev->flags & IFF_PROMISC) {
 		/* Set RCTRL to PROM */
 		tempval = gfar_read(&regs->rctrl);
 		tempval |= RCTRL_PROM;
@@ -2112,7 +2772,7 @@
 		gfar_write(&regs->rctrl, tempval);
 	}
 
-	if(dev->flags & IFF_ALLMULTI) {
+	if (dev->flags & IFF_ALLMULTI) {
 		/* Set the hash to rx all multicast frames */
 		gfar_write(&regs->igaddr0, 0xffffffff);
 		gfar_write(&regs->igaddr1, 0xffffffff);
@@ -2164,7 +2824,7 @@
 			em_num = 0;
 		}
 
-		if(dev->mc_count == 0)
+		if (dev->mc_count == 0)
 			return;
 
 		/* Parse the list, and set the appropriate bits */
@@ -2230,10 +2890,11 @@
 static void gfar_set_mac_for_addr(struct net_device *dev, int num, u8 *addr)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int idx;
 	char tmpbuf[MAC_ADDR_LEN];
 	u32 tempval;
-	u32 __iomem *macptr = &priv->regs->macstnaddr1;
+	u32 __iomem *macptr = &regs->macstnaddr1;
 
 	macptr += num*2;
 
@@ -2250,16 +2911,18 @@
 }
 
 /* GFAR error interrupt handler */
-static irqreturn_t gfar_error(int irq, void *dev_id)
+static irqreturn_t gfar_error(int irq, void *grp_id)
 {
-	struct net_device *dev = dev_id;
-	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_grp *gfargrp = grp_id;
+	struct gfar __iomem *regs = gfargrp->regs;
+	struct gfar_private *priv= gfargrp->priv;
+	struct net_device *dev = priv->ndev;
 
 	/* Save ievent for future reference */
-	u32 events = gfar_read(&priv->regs->ievent);
+	u32 events = gfar_read(&regs->ievent);
 
 	/* Clear IEVENT */
-	gfar_write(&priv->regs->ievent, events & IEVENT_ERR_MASK);
+	gfar_write(&regs->ievent, events & IEVENT_ERR_MASK);
 
 	/* Magic Packet is not an error. */
 	if ((priv->device_flags & FSL_GIANFAR_DEV_HAS_MAGIC_PACKET) &&
@@ -2269,7 +2932,7 @@
 	/* Hmm... */
 	if (netif_msg_rx_err(priv) || netif_msg_tx_err(priv))
 		printk(KERN_DEBUG "%s: error interrupt (ievent=0x%08x imask=0x%08x)\n",
-		       dev->name, events, gfar_read(&priv->regs->imask));
+		       dev->name, events, gfar_read(&regs->imask));
 
 	/* Update the error counters */
 	if (events & IEVENT_TXE) {
@@ -2287,7 +2950,7 @@
 			priv->extra_stats.tx_underrun++;
 
 			/* Reactivate the Tx Queues */
-			gfar_write(&priv->regs->tstat, TSTAT_CLEAR_THALT);
+			gfar_write(&regs->tstat, gfargrp->tstat);
 		}
 		if (netif_msg_tx_err(priv))
 			printk(KERN_DEBUG "%s: Transmit Error\n", dev->name);
@@ -2296,11 +2959,11 @@
 		dev->stats.rx_errors++;
 		priv->extra_stats.rx_bsy++;
 
-		gfar_receive(irq, dev_id);
+		gfar_receive(irq, grp_id);
 
 		if (netif_msg_rx_err(priv))
 			printk(KERN_DEBUG "%s: busy error (rstat: %x)\n",
-			       dev->name, gfar_read(&priv->regs->rstat));
+			       dev->name, gfar_read(&regs->rstat));
 	}
 	if (events & IEVENT_BABR) {
 		dev->stats.rx_errors++;
@@ -2331,6 +2994,9 @@
 		.type = "network",
 		.compatible = "gianfar",
 	},
+	{
+		.compatible = "fsl,etsec2",
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(of, gfar_match);
@@ -2342,8 +3008,9 @@
 
 	.probe = gfar_probe,
 	.remove = gfar_remove,
-	.suspend = gfar_suspend,
-	.resume = gfar_resume,
+	.suspend = gfar_legacy_suspend,
+	.resume = gfar_legacy_resume,
+	.driver.pm = GFAR_PM_OPS,
 };
 
 static int __init gfar_init(void)
diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
index 2cd9433..44b63da 100644
--- a/drivers/net/gianfar.h
+++ b/drivers/net/gianfar.h
@@ -7,8 +7,9 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2004 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -74,6 +75,13 @@
 extern const char gfar_driver_name[];
 extern const char gfar_driver_version[];
 
+/* MAXIMUM NUMBER OF QUEUES SUPPORTED */
+#define MAX_TX_QS	0x8
+#define MAX_RX_QS	0x8
+
+/* MAXIMUM NUMBER OF GROUPS SUPPORTED */
+#define MAXGROUPS 0x2
+
 /* These need to be powers of 2 for this driver */
 #define DEFAULT_TX_RING_SIZE	256
 #define DEFAULT_RX_RING_SIZE	256
@@ -171,12 +179,63 @@
 
 #define MINFLR_INIT_SETTINGS	0x00000040
 
+/* Tqueue control */
+#define TQUEUE_EN0		0x00008000
+#define TQUEUE_EN1		0x00004000
+#define TQUEUE_EN2		0x00002000
+#define TQUEUE_EN3		0x00001000
+#define TQUEUE_EN4		0x00000800
+#define TQUEUE_EN5		0x00000400
+#define TQUEUE_EN6		0x00000200
+#define TQUEUE_EN7		0x00000100
+#define TQUEUE_EN_ALL		0x0000FF00
+
+#define TR03WT_WT0_MASK		0xFF000000
+#define TR03WT_WT1_MASK		0x00FF0000
+#define TR03WT_WT2_MASK		0x0000FF00
+#define TR03WT_WT3_MASK		0x000000FF
+
+#define TR47WT_WT4_MASK		0xFF000000
+#define TR47WT_WT5_MASK		0x00FF0000
+#define TR47WT_WT6_MASK		0x0000FF00
+#define TR47WT_WT7_MASK		0x000000FF
+
+/* Rqueue control */
+#define RQUEUE_EX0		0x00800000
+#define RQUEUE_EX1		0x00400000
+#define RQUEUE_EX2		0x00200000
+#define RQUEUE_EX3		0x00100000
+#define RQUEUE_EX4		0x00080000
+#define RQUEUE_EX5		0x00040000
+#define RQUEUE_EX6		0x00020000
+#define RQUEUE_EX7		0x00010000
+#define RQUEUE_EX_ALL		0x00FF0000
+
+#define RQUEUE_EN0		0x00000080
+#define RQUEUE_EN1		0x00000040
+#define RQUEUE_EN2		0x00000020
+#define RQUEUE_EN3		0x00000010
+#define RQUEUE_EN4		0x00000008
+#define RQUEUE_EN5		0x00000004
+#define RQUEUE_EN6		0x00000002
+#define RQUEUE_EN7		0x00000001
+#define RQUEUE_EN_ALL		0x000000FF
+
 /* Init to do tx snooping for buffers and descriptors */
 #define DMACTRL_INIT_SETTINGS   0x000000c3
 #define DMACTRL_GRS             0x00000010
 #define DMACTRL_GTS             0x00000008
 
-#define TSTAT_CLEAR_THALT       0x80000000
+#define TSTAT_CLEAR_THALT_ALL	0xFF000000
+#define TSTAT_CLEAR_THALT	0x80000000
+#define TSTAT_CLEAR_THALT0	0x80000000
+#define TSTAT_CLEAR_THALT1	0x40000000
+#define TSTAT_CLEAR_THALT2	0x20000000
+#define TSTAT_CLEAR_THALT3	0x10000000
+#define TSTAT_CLEAR_THALT4	0x08000000
+#define TSTAT_CLEAR_THALT5	0x04000000
+#define TSTAT_CLEAR_THALT6	0x02000000
+#define TSTAT_CLEAR_THALT7	0x01000000
 
 /* Interrupt coalescing macros */
 #define IC_ICEN			0x80000000
@@ -227,6 +286,13 @@
 #define TCTRL_IPCSEN		0x00004000
 #define TCTRL_TUCSEN		0x00002000
 #define TCTRL_VLINS		0x00001000
+#define TCTRL_THDF		0x00000800
+#define TCTRL_RFCPAUSE		0x00000010
+#define TCTRL_TFCPAUSE		0x00000008
+#define TCTRL_TXSCHED_MASK	0x00000006
+#define TCTRL_TXSCHED_INIT	0x00000000
+#define TCTRL_TXSCHED_PRIO	0x00000002
+#define TCTRL_TXSCHED_WRRS	0x00000004
 #define TCTRL_INIT_CSUM		(TCTRL_TUCSEN | TCTRL_IPCSEN)
 
 #define IEVENT_INIT_CLEAR	0xffffffff
@@ -315,6 +381,84 @@
 #define BD_LFLAG(flags) ((flags) << 16)
 #define BD_LENGTH_MASK		0x0000ffff
 
+#define CLASS_CODE_UNRECOG		0x00
+#define CLASS_CODE_DUMMY1		0x01
+#define CLASS_CODE_ETHERTYPE1		0x02
+#define CLASS_CODE_ETHERTYPE2		0x03
+#define CLASS_CODE_USER_PROG1		0x04
+#define CLASS_CODE_USER_PROG2		0x05
+#define CLASS_CODE_USER_PROG3		0x06
+#define CLASS_CODE_USER_PROG4		0x07
+#define CLASS_CODE_TCP_IPV4		0x08
+#define CLASS_CODE_UDP_IPV4		0x09
+#define CLASS_CODE_AH_ESP_IPV4		0x0a
+#define CLASS_CODE_SCTP_IPV4		0x0b
+#define CLASS_CODE_TCP_IPV6		0x0c
+#define CLASS_CODE_UDP_IPV6		0x0d
+#define CLASS_CODE_AH_ESP_IPV6		0x0e
+#define CLASS_CODE_SCTP_IPV6		0x0f
+
+#define FPR_FILER_MASK	0xFFFFFFFF
+#define MAX_FILER_IDX	0xFF
+
+/* RQFCR register bits */
+#define RQFCR_GPI		0x80000000
+#define RQFCR_HASHTBL_Q		0x00000000
+#define RQFCR_HASHTBL_0		0x00020000
+#define RQFCR_HASHTBL_1		0x00040000
+#define RQFCR_HASHTBL_2		0x00060000
+#define RQFCR_HASHTBL_3		0x00080000
+#define RQFCR_HASH		0x00010000
+#define RQFCR_CLE		0x00000200
+#define RQFCR_RJE		0x00000100
+#define RQFCR_AND		0x00000080
+#define RQFCR_CMP_EXACT		0x00000000
+#define RQFCR_CMP_MATCH		0x00000020
+#define RQFCR_CMP_NOEXACT	0x00000040
+#define RQFCR_CMP_NOMATCH	0x00000060
+
+/* RQFCR PID values */
+#define	RQFCR_PID_MASK		0x00000000
+#define	RQFCR_PID_PARSE		0x00000001
+#define	RQFCR_PID_ARB		0x00000002
+#define	RQFCR_PID_DAH		0x00000003
+#define	RQFCR_PID_DAL		0x00000004
+#define	RQFCR_PID_SAH		0x00000005
+#define	RQFCR_PID_SAL		0x00000006
+#define	RQFCR_PID_ETY		0x00000007
+#define	RQFCR_PID_VID		0x00000008
+#define	RQFCR_PID_PRI		0x00000009
+#define	RQFCR_PID_TOS		0x0000000A
+#define	RQFCR_PID_L4P		0x0000000B
+#define	RQFCR_PID_DIA		0x0000000C
+#define	RQFCR_PID_SIA		0x0000000D
+#define	RQFCR_PID_DPT		0x0000000E
+#define	RQFCR_PID_SPT		0x0000000F
+
+/* RQFPR when PID is 0x0001 */
+#define RQFPR_HDR_GE_512	0x00200000
+#define RQFPR_LERR		0x00100000
+#define RQFPR_RAR		0x00080000
+#define RQFPR_RARQ		0x00040000
+#define RQFPR_AR		0x00020000
+#define RQFPR_ARQ		0x00010000
+#define RQFPR_EBC		0x00008000
+#define RQFPR_VLN		0x00004000
+#define RQFPR_CFI		0x00002000
+#define RQFPR_JUM		0x00001000
+#define RQFPR_IPF		0x00000800
+#define RQFPR_FIF		0x00000400
+#define RQFPR_IPV4		0x00000200
+#define RQFPR_IPV6		0x00000100
+#define RQFPR_ICC		0x00000080
+#define RQFPR_ICV		0x00000040
+#define RQFPR_TCP		0x00000020
+#define RQFPR_UDP		0x00000010
+#define RQFPR_TUC		0x00000008
+#define RQFPR_TUV		0x00000004
+#define RQFPR_PER		0x00000002
+#define RQFPR_EER		0x00000001
+
 /* TxBD status field bits */
 #define TXBD_READY		0x8000
 #define TXBD_PADCRC		0x4000
@@ -503,25 +647,32 @@
 
 struct gfar {
 	u32	tsec_id;	/* 0x.000 - Controller ID register */
-	u8	res1[12];
+	u32	tsec_id2;	/* 0x.004 - Controller ID2 register */
+	u8	res1[8];
 	u32	ievent;		/* 0x.010 - Interrupt Event Register */
 	u32	imask;		/* 0x.014 - Interrupt Mask Register */
 	u32	edis;		/* 0x.018 - Error Disabled Register */
-	u8	res2[4];
+	u32	emapg;		/* 0x.01c - Group Error mapping register */
 	u32	ecntrl;		/* 0x.020 - Ethernet Control Register */
 	u32	minflr;		/* 0x.024 - Minimum Frame Length Register */
 	u32	ptv;		/* 0x.028 - Pause Time Value Register */
 	u32	dmactrl;	/* 0x.02c - DMA Control Register */
 	u32	tbipa;		/* 0x.030 - TBI PHY Address Register */
-	u8	res3[88];
+	u8	res2[28];
+	u32	fifo_rx_pause;	/* 0x.050 - FIFO receive pause start threshold
+					register */
+	u32	fifo_rx_pause_shutoff;	/* x.054 - FIFO receive starve shutoff
+						register */
+	u32	fifo_rx_alarm;	/* 0x.058 - FIFO receive alarm start threshold
+						register */
+	u32	fifo_rx_alarm_shutoff;	/*0x.05c - FIFO receive alarm  starve
+						shutoff register */
+	u8	res3[44];
 	u32	fifo_tx_thr;	/* 0x.08c - FIFO transmit threshold register */
 	u8	res4[8];
 	u32	fifo_tx_starve;	/* 0x.098 - FIFO transmit starve register */
 	u32	fifo_tx_starve_shutoff;	/* 0x.09c - FIFO transmit starve shutoff register */
-	u8	res5[4];
-	u32	fifo_rx_pause;	/* 0x.0a4 - FIFO receive pause threshold register */
-	u32	fifo_rx_alarm;	/* 0x.0a8 - FIFO receive alarm threshold register */
-	u8	res6[84];
+	u8	res5[96];
 	u32	tctrl;		/* 0x.100 - Transmit Control Register */
 	u32	tstat;		/* 0x.104 - Transmit Status Register */
 	u32	dfvlan;		/* 0x.108 - Default VLAN Control word */
@@ -572,7 +723,11 @@
 	u8	res12[8];
 	u32	rxic;		/* 0x.310 - Receive Interrupt Coalescing Configuration Register */
 	u32	rqueue;		/* 0x.314 - Receive queue control register */
-	u8	res13[24];
+	u32	rir0;		/* 0x.318 - Ring mapping register 0 */
+	u32	rir1;		/* 0x.31c - Ring mapping register 1 */
+	u32	rir2;		/* 0x.320 - Ring mapping register 2 */
+	u32	rir3;		/* 0x.324 - Ring mapping register 3 */
+	u8	res13[8];
 	u32	rbifx;		/* 0x.330 - Receive bit field extract control register */
 	u32	rqfar;		/* 0x.334 - Receive queue filing table address register */
 	u32	rqfcr;		/* 0x.338 - Receive queue filing table control register */
@@ -621,7 +776,7 @@
 	u32	maxfrm;		/* 0x.510 - Maximum Frame Length Register */
 	u8	res18[12];
 	u8	gfar_mii_regs[24];	/* See gianfar_phy.h */
-	u8	res19[4];
+	u32	ifctrl;		/* 0x.538 - Interface control register */
 	u32	ifstat;		/* 0x.53c - Interface Status Register */
 	u32	macstnaddr1;	/* 0x.540 - Station Address Part 1 Register */
 	u32	macstnaddr2;	/* 0x.544 - Station Address Part 2 Register */
@@ -682,8 +837,30 @@
 	u8	res23c[248];
 	u32	attr;		/* 0x.bf8 - Attributes Register */
 	u32	attreli;	/* 0x.bfc - Attributes Extract Length and Extract Index Register */
-	u8	res24[1024];
-
+	u8	res24[688];
+	u32	isrg0;		/* 0x.eb0 - Interrupt steering group 0 register */
+	u32	isrg1;		/* 0x.eb4 - Interrupt steering group 1 register */
+	u32	isrg2;		/* 0x.eb8 - Interrupt steering group 2 register */
+	u32	isrg3;		/* 0x.ebc - Interrupt steering group 3 register */
+	u8	res25[16];
+	u32	rxic0;		/* 0x.ed0 - Ring 0 Rx interrupt coalescing */
+	u32	rxic1;		/* 0x.ed4 - Ring 1 Rx interrupt coalescing */
+	u32	rxic2;		/* 0x.ed8 - Ring 2 Rx interrupt coalescing */
+	u32	rxic3;		/* 0x.edc - Ring 3 Rx interrupt coalescing */
+	u32	rxic4;		/* 0x.ee0 - Ring 4 Rx interrupt coalescing */
+	u32	rxic5;		/* 0x.ee4 - Ring 5 Rx interrupt coalescing */
+	u32	rxic6;		/* 0x.ee8 - Ring 6 Rx interrupt coalescing */
+	u32	rxic7;		/* 0x.eec - Ring 7 Rx interrupt coalescing */
+	u8	res26[32];
+	u32	txic0;		/* 0x.f10 - Ring 0 Tx interrupt coalescing */
+	u32	txic1;		/* 0x.f14 - Ring 1 Tx interrupt coalescing */
+	u32	txic2;		/* 0x.f18 - Ring 2 Tx interrupt coalescing */
+	u32	txic3;		/* 0x.f1c - Ring 3 Tx interrupt coalescing */
+	u32	txic4;		/* 0x.f20 - Ring 4 Tx interrupt coalescing */
+	u32	txic5;		/* 0x.f24 - Ring 5 Tx interrupt coalescing */
+	u32	txic6;		/* 0x.f28 - Ring 6 Tx interrupt coalescing */
+	u32	txic7;		/* 0x.f2c - Ring 7 Tx interrupt coalescing */
+	u8	res27[208];
 };
 
 /* Flags related to gianfar device features */
@@ -699,6 +876,133 @@
 #define FSL_GIANFAR_DEV_HAS_BD_STASHING		0x00000200
 #define FSL_GIANFAR_DEV_HAS_BUF_STASHING	0x00000400
 
+#if (MAXGROUPS == 2)
+#define DEFAULT_MAPPING 	0xAA
+#else
+#define DEFAULT_MAPPING 	0xFF
+#endif
+
+#define ISRG_SHIFT_TX	0x10
+#define ISRG_SHIFT_RX	0x18
+
+/* The same driver can operate in two modes */
+/* SQ_SG_MODE: Single Queue Single Group Mode
+ * 		(Backward compatible mode)
+ * MQ_MG_MODE: Multi Queue Multi Group mode
+ */
+enum {
+	SQ_SG_MODE = 0,
+	MQ_MG_MODE
+};
+
+/**
+ *	struct gfar_priv_tx_q - per tx queue structure
+ *	@txlock: per queue tx spin lock
+ *	@tx_skbuff:skb pointers
+ *	@skb_curtx: to be used skb pointer
+ *	@skb_dirtytx:the last used skb pointer
+ *	@qindex: index of this queue
+ *	@dev: back pointer to the dev structure
+ *	@grp: back pointer to the group to which this queue belongs
+ *	@tx_bd_base: First tx buffer descriptor
+ *	@cur_tx: Next free ring entry
+ *	@dirty_tx: First buffer in line to be transmitted
+ *	@tx_ring_size: Tx ring size
+ *	@num_txbdfree: number of free TxBds
+ *	@txcoalescing: enable/disable tx coalescing
+ *	@txic: transmit interrupt coalescing value
+ *	@txcount: coalescing value if based on tx frame count
+ *	@txtime: coalescing value if based on time
+ */
+struct gfar_priv_tx_q {
+	spinlock_t txlock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct sk_buff ** tx_skbuff;
+	/* Buffer descriptor pointers */
+	dma_addr_t tx_bd_dma_base;
+	struct	txbd8 *tx_bd_base;
+	struct	txbd8 *cur_tx;
+	struct	txbd8 *dirty_tx;
+	struct	net_device *dev;
+	struct gfar_priv_grp *grp;
+	u16	skb_curtx;
+	u16	skb_dirtytx;
+	u16	qindex;
+	unsigned int tx_ring_size;
+	unsigned int num_txbdfree;
+	/* Configuration info for the coalescing features */
+	unsigned char txcoalescing;
+	unsigned long txic;
+	unsigned short txcount;
+	unsigned short txtime;
+};
+
+/**
+ *	struct gfar_priv_rx_q - per rx queue structure
+ *	@rxlock: per queue rx spin lock
+ *	@rx_skbuff: skb pointers
+ *	@skb_currx: currently use skb pointer
+ *	@rx_bd_base: First rx buffer descriptor
+ *	@cur_rx: Next free rx ring entry
+ *	@qindex: index of this queue
+ *	@dev: back pointer to the dev structure
+ *	@rx_ring_size: Rx ring size
+ *	@rxcoalescing: enable/disable rx-coalescing
+ *	@rxic: receive interrupt coalescing vlaue
+ */
+
+struct gfar_priv_rx_q {
+	spinlock_t rxlock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct	sk_buff ** rx_skbuff;
+	dma_addr_t rx_bd_dma_base;
+	struct	rxbd8 *rx_bd_base;
+	struct	rxbd8 *cur_rx;
+	struct	net_device *dev;
+	struct gfar_priv_grp *grp;
+	u16	skb_currx;
+	u16	qindex;
+	unsigned int	rx_ring_size;
+	/* RX Coalescing values */
+	unsigned char rxcoalescing;
+	unsigned long rxic;
+};
+
+/**
+ *	struct gfar_priv_grp - per group structure
+ *	@napi: the napi poll function
+ *	@priv: back pointer to the priv structure
+ *	@regs: the ioremapped register space for this group
+ *	@grp_id: group id for this group
+ *	@interruptTransmit: The TX interrupt number for this group
+ *	@interruptReceive: The RX interrupt number for this group
+ *	@interruptError: The ERROR interrupt number for this group
+ *	@int_name_tx: tx interrupt name for this group
+ *	@int_name_rx: rx interrupt name for this group
+ *	@int_name_er: er interrupt name for this group
+ */
+
+struct gfar_priv_grp {
+	spinlock_t grplock __attribute__ ((aligned (SMP_CACHE_BYTES)));
+	struct	napi_struct napi;
+	struct gfar_private *priv;
+	struct gfar __iomem *regs;
+	unsigned int grp_id;
+	unsigned int rx_bit_map;
+	unsigned int tx_bit_map;
+	unsigned int num_tx_queues;
+	unsigned int num_rx_queues;
+	unsigned int rstat;
+	unsigned int tstat;
+	unsigned int imask;
+	unsigned int ievent;
+	unsigned int interruptTransmit;
+	unsigned int interruptReceive;
+	unsigned int interruptError;
+
+	char int_name_tx[GFAR_INT_NAME_MAX];
+	char int_name_rx[GFAR_INT_NAME_MAX];
+	char int_name_er[GFAR_INT_NAME_MAX];
+};
+
 /* Struct stolen almost completely (and shamelessly) from the FCC enet source
  * (Ok, that's not so true anymore, but there is a family resemblence)
  * The GFAR buffer descriptors track the ring buffers.  The rx_bd_base
@@ -709,62 +1013,36 @@
  * the buffer descriptor determines the actual condition.
  */
 struct gfar_private {
-	/* Fields controlled by TX lock */
-	spinlock_t txlock;
 
-	/* Pointer to the array of skbuffs */
-	struct sk_buff ** tx_skbuff;
+	/* Indicates how many tx, rx queues are enabled */
+	unsigned int num_tx_queues;
+	unsigned int num_rx_queues;
+	unsigned int num_grps;
+	unsigned int mode;
 
-	/* next free skb in the array */
-	u16 skb_curtx;
-
-	/* First skb in line to be transmitted */
-	u16 skb_dirtytx;
-
-	/* Configuration info for the coalescing features */
-	unsigned char txcoalescing;
-	unsigned long txic;
-
-	/* Buffer descriptor pointers */
-	struct txbd8 *tx_bd_base;	/* First tx buffer descriptor */
-	struct txbd8 *cur_tx;	        /* Next free ring entry */
-	struct txbd8 *dirty_tx;		/* First buffer in line
-					   to be transmitted */
-	unsigned int tx_ring_size;
-	unsigned int num_txbdfree;	/* number of TxBDs free */
-
-	/* RX Locked fields */
-	spinlock_t rxlock;
+	/* The total tx and rx ring size for the enabled queues */
+	unsigned int total_tx_ring_size;
+	unsigned int total_rx_ring_size;
 
 	struct device_node *node;
 	struct net_device *ndev;
 	struct of_device *ofdev;
-	struct napi_struct napi;
 
-	/* skb array and index */
-	struct sk_buff ** rx_skbuff;
-	u16 skb_currx;
+	struct gfar_priv_grp gfargrp[MAXGROUPS];
+	struct gfar_priv_tx_q *tx_queue[MAX_TX_QS];
+	struct gfar_priv_rx_q *rx_queue[MAX_RX_QS];
 
-	/* RX Coalescing values */
-	unsigned char rxcoalescing;
-	unsigned long rxic;
-
-	struct rxbd8 *rx_bd_base;	/* First Rx buffers */
-	struct rxbd8 *cur_rx;           /* Next free rx ring entry */
-
-	/* RX parameters */
-	unsigned int rx_ring_size;
+	/* RX per device parameters */
 	unsigned int rx_buffer_size;
 	unsigned int rx_stash_size;
 	unsigned int rx_stash_index;
 
+	u32 cur_filer_idx;
+
 	struct sk_buff_head rx_recycle;
 
 	struct vlan_group *vlgrp;
 
-	/* Unprotected fields */
-	/* Pointer to the GFAR memory mapped Registers */
-	struct gfar __iomem *regs;
 
 	/* Hash registers and their width */
 	u32 __iomem *hash_regs[16];
@@ -785,13 +1063,10 @@
 	unsigned char rx_csum_enable:1,
 		extended_hash:1,
 		bd_stash_en:1,
+		rx_filer_enable:1,
 		wol_en:1; /* Wake-on-LAN enabled */
 	unsigned short padding;
 
-	unsigned int interruptTransmit;
-	unsigned int interruptReceive;
-	unsigned int interruptError;
-
 	/* PHY stuff */
 	struct phy_device *phydev;
 	struct mii_bus *mii_bus;
@@ -803,14 +1078,13 @@
 
 	struct work_struct reset_task;
 
-	char int_name_tx[GFAR_INT_NAME_MAX];
-	char int_name_rx[GFAR_INT_NAME_MAX];
-	char int_name_er[GFAR_INT_NAME_MAX];
-
 	/* Network Statistics */
 	struct gfar_extra_stats extra_stats;
 };
 
+extern unsigned int ftp_rqfpr[MAX_FILER_IDX + 1];
+extern unsigned int ftp_rqfcr[MAX_FILER_IDX + 1];
+
 static inline u32 gfar_read(volatile unsigned __iomem *addr)
 {
 	u32 val;
@@ -823,12 +1097,28 @@
 	out_be32(addr, val);
 }
 
+static inline void gfar_write_filer(struct gfar_private *priv,
+		unsigned int far, unsigned int fcr, unsigned int fpr)
+{
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
+
+	gfar_write(&regs->rqfar, far);
+	gfar_write(&regs->rqfcr, fcr);
+	gfar_write(&regs->rqfpr, fpr);
+}
+
+extern void lock_rx_qs(struct gfar_private *priv);
+extern void lock_tx_qs(struct gfar_private *priv);
+extern void unlock_rx_qs(struct gfar_private *priv);
+extern void unlock_tx_qs(struct gfar_private *priv);
 extern irqreturn_t gfar_receive(int irq, void *dev_id);
 extern int startup_gfar(struct net_device *dev);
 extern void stop_gfar(struct net_device *dev);
 extern void gfar_halt(struct net_device *dev);
 extern void gfar_phy_test(struct mii_bus *bus, struct phy_device *phydev,
 		int enable, u32 regnum, u32 read);
+extern void gfar_configure_coalescing(struct gfar_private *priv,
+		unsigned int tx_mask, unsigned int rx_mask);
 void gfar_init_sysfs(struct net_device *dev);
 
 extern const struct ethtool_ops gfar_ethtool_ops;
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 6c144b5..1010367 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -7,8 +7,9 @@
  *
  *  Author: Andy Fleming
  *  Maintainer: Kumar Gala
+ *  Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- *  Copyright (c) 2003,2004 Freescale Semiconductor, Inc.
+ *  Copyright 2003-2006, 2008-2009 Freescale Semiconductor, Inc.
  *
  *  This software may be used and distributed according to
  *  the terms of the GNU Public License, Version 2, incorporated herein
@@ -41,7 +42,7 @@
 #include "gianfar.h"
 
 extern void gfar_start(struct net_device *dev);
-extern int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit);
+extern int gfar_clean_rx_ring(struct gfar_priv_rx_q *rx_queue, int rx_work_limit);
 
 #define GFAR_MAX_COAL_USECS 0xffff
 #define GFAR_MAX_COAL_FRAMES 0xff
@@ -136,10 +137,11 @@
 {
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	u64 *extra = (u64 *) & priv->extra_stats;
 
 	if (priv->device_flags & FSL_GIANFAR_DEV_HAS_RMON) {
-		u32 __iomem *rmon = (u32 __iomem *) & priv->regs->rmon;
+		u32 __iomem *rmon = (u32 __iomem *) &regs->rmon;
 		struct gfar_stats *stats = (struct gfar_stats *) buf;
 
 		for (i = 0; i < GFAR_RMON_LEN; i++)
@@ -197,12 +199,18 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	struct phy_device *phydev = priv->phydev;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct gfar_priv_tx_q *tx_queue = NULL;
 
 	if (NULL == phydev)
 		return -ENODEV;
+	tx_queue = priv->tx_queue[0];
+	rx_queue = priv->rx_queue[0];
 
-	cmd->maxtxpkt = get_icft_value(priv->txic);
-	cmd->maxrxpkt = get_icft_value(priv->rxic);
+	/* etsec-1.7 and older versions have only one txic
+	 * and rxic regs although they support multiple queues */
+	cmd->maxtxpkt = get_icft_value(tx_queue->txic);
+	cmd->maxrxpkt = get_icft_value(rx_queue->rxic);
 
 	return phy_ethtool_gset(phydev, cmd);
 }
@@ -218,7 +226,7 @@
 {
 	int i;
 	struct gfar_private *priv = netdev_priv(dev);
-	u32 __iomem *theregs = (u32 __iomem *) priv->regs;
+	u32 __iomem *theregs = (u32 __iomem *) priv->gfargrp[0].regs;
 	u32 *buf = (u32 *) regbuf;
 
 	for (i = 0; i < sizeof (struct gfar) / sizeof (u32); i++)
@@ -279,6 +287,8 @@
 static int gfar_gcoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_rx_q *rx_queue = NULL;
+	struct gfar_priv_tx_q *tx_queue = NULL;
 	unsigned long rxtime;
 	unsigned long rxcount;
 	unsigned long txtime;
@@ -290,10 +300,13 @@
 	if (NULL == priv->phydev)
 		return -ENODEV;
 
-	rxtime  = get_ictt_value(priv->rxic);
-	rxcount = get_icft_value(priv->rxic);
-	txtime  = get_ictt_value(priv->txic);
-	txcount = get_icft_value(priv->txic);
+	rx_queue = priv->rx_queue[0];
+	tx_queue = priv->tx_queue[0];
+
+	rxtime  = get_ictt_value(rx_queue->rxic);
+	rxcount = get_icft_value(rx_queue->rxic);
+	txtime  = get_ictt_value(tx_queue->txic);
+	txcount = get_icft_value(tx_queue->txic);
 	cvals->rx_coalesce_usecs = gfar_ticks2usecs(priv, rxtime);
 	cvals->rx_max_coalesced_frames = rxcount;
 
@@ -339,16 +352,23 @@
 static int gfar_scoalesce(struct net_device *dev, struct ethtool_coalesce *cvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	int i = 0;
 
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_COALESCE))
 		return -EOPNOTSUPP;
 
 	/* Set up rx coalescing */
+	/* As of now, we will enable/disable coalescing for all
+	 * queues together in case of eTSEC2, this will be modified
+	 * along with the ethtool interface */
 	if ((cvals->rx_coalesce_usecs == 0) ||
-	    (cvals->rx_max_coalesced_frames == 0))
-		priv->rxcoalescing = 0;
-	else
-		priv->rxcoalescing = 1;
+	    (cvals->rx_max_coalesced_frames == 0)) {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 0;
+	} else {
+		for (i = 0; i < priv->num_rx_queues; i++)
+			priv->rx_queue[i]->rxcoalescing = 1;
+	}
 
 	if (NULL == priv->phydev)
 		return -ENODEV;
@@ -366,15 +386,21 @@
 		return -EINVAL;
 	}
 
-	priv->rxic = mk_ic_value(cvals->rx_max_coalesced_frames,
-		gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rxic = mk_ic_value(
+			cvals->rx_max_coalesced_frames,
+			gfar_usecs2ticks(priv, cvals->rx_coalesce_usecs));
+	}
 
 	/* Set up tx coalescing */
 	if ((cvals->tx_coalesce_usecs == 0) ||
-	    (cvals->tx_max_coalesced_frames == 0))
-		priv->txcoalescing = 0;
-	else
-		priv->txcoalescing = 1;
+	    (cvals->tx_max_coalesced_frames == 0)) {
+		for (i = 0; i < priv->num_tx_queues; i++)
+			priv->tx_queue[i]->txcoalescing = 0;
+	} else {
+		for (i = 0; i < priv->num_tx_queues; i++)
+			priv->tx_queue[i]->txcoalescing = 1;
+	}
 
 	/* Check the bounds of the values */
 	if (cvals->tx_coalesce_usecs > GFAR_MAX_COAL_USECS) {
@@ -389,16 +415,13 @@
 		return -EINVAL;
 	}
 
-	priv->txic = mk_ic_value(cvals->tx_max_coalesced_frames,
-		gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
+	for (i = 0; i < priv->num_tx_queues; i++) {
+		priv->tx_queue[i]->txic = mk_ic_value(
+			cvals->tx_max_coalesced_frames,
+			gfar_usecs2ticks(priv, cvals->tx_coalesce_usecs));
+	}
 
-	gfar_write(&priv->regs->rxic, 0);
-	if (priv->rxcoalescing)
-		gfar_write(&priv->regs->rxic, priv->rxic);
-
-	gfar_write(&priv->regs->txic, 0);
-	if (priv->txcoalescing)
-		gfar_write(&priv->regs->txic, priv->txic);
+	gfar_configure_coalescing(priv, 0xFF, 0xFF);
 
 	return 0;
 }
@@ -409,6 +432,11 @@
 static void gfar_gringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
+	struct gfar_priv_tx_q *tx_queue = NULL;
+	struct gfar_priv_rx_q *rx_queue = NULL;
+
+	tx_queue = priv->tx_queue[0];
+	rx_queue = priv->rx_queue[0];
 
 	rvals->rx_max_pending = GFAR_RX_MAX_RING_SIZE;
 	rvals->rx_mini_max_pending = GFAR_RX_MAX_RING_SIZE;
@@ -418,10 +446,10 @@
 	/* Values changeable by the user.  The valid values are
 	 * in the range 1 to the "*_max_pending" counterpart above.
 	 */
-	rvals->rx_pending = priv->rx_ring_size;
-	rvals->rx_mini_pending = priv->rx_ring_size;
-	rvals->rx_jumbo_pending = priv->rx_ring_size;
-	rvals->tx_pending = priv->tx_ring_size;
+	rvals->rx_pending = rx_queue->rx_ring_size;
+	rvals->rx_mini_pending = rx_queue->rx_ring_size;
+	rvals->rx_jumbo_pending = rx_queue->rx_ring_size;
+	rvals->tx_pending = tx_queue->tx_ring_size;
 }
 
 /* Change the current ring parameters, stopping the controller if
@@ -431,7 +459,7 @@
 static int gfar_sringparam(struct net_device *dev, struct ethtool_ringparam *rvals)
 {
 	struct gfar_private *priv = netdev_priv(dev);
-	int err = 0;
+	int err = 0, i = 0;
 
 	if (rvals->rx_pending > GFAR_RX_MAX_RING_SIZE)
 		return -EINVAL;
@@ -451,34 +479,41 @@
 		return -EINVAL;
 	}
 
+
 	if (dev->flags & IFF_UP) {
 		unsigned long flags;
 
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
 
 		gfar_halt(dev);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_rx_qs(priv);
+		unlock_tx_qs(priv);
+		local_irq_restore(flags);
 
-		gfar_clean_rx_ring(dev, priv->rx_ring_size);
+		for (i = 0; i < priv->num_rx_queues; i++)
+			gfar_clean_rx_ring(priv->rx_queue[i],
+					priv->rx_queue[i]->rx_ring_size);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
 	}
 
 	/* Change the size */
-	priv->rx_ring_size = rvals->rx_pending;
-	priv->tx_ring_size = rvals->tx_pending;
-	priv->num_txbdfree = priv->tx_ring_size;
+	for (i = 0; i < priv->num_rx_queues; i++) {
+		priv->rx_queue[i]->rx_ring_size = rvals->rx_pending;
+		priv->tx_queue[i]->tx_ring_size = rvals->tx_pending;
+		priv->tx_queue[i]->num_txbdfree = priv->tx_queue[i]->tx_ring_size;
+	}
 
 	/* Rebuild the rings with the new size */
 	if (dev->flags & IFF_UP) {
 		err = startup_gfar(dev);
-		netif_wake_queue(dev);
+		netif_tx_wake_all_queues(dev);
 	}
 	return err;
 }
@@ -487,23 +522,28 @@
 {
 	struct gfar_private *priv = netdev_priv(dev);
 	unsigned long flags;
-	int err = 0;
+	int err = 0, i = 0;
 
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_CSUM))
 		return -EOPNOTSUPP;
 
+
 	if (dev->flags & IFF_UP) {
 		/* Halt TX and RX, and process the frames which
 		 * have already been received */
-		spin_lock_irqsave(&priv->txlock, flags);
-		spin_lock(&priv->rxlock);
+		local_irq_save(flags);
+		lock_tx_qs(priv);
+		lock_rx_qs(priv);
 
 		gfar_halt(dev);
 
-		spin_unlock(&priv->rxlock);
-		spin_unlock_irqrestore(&priv->txlock, flags);
+		unlock_tx_qs(priv);
+		unlock_rx_qs(priv);
+		local_irq_save(flags);
 
-		gfar_clean_rx_ring(dev, priv->rx_ring_size);
+		for (i = 0; i < priv->num_rx_queues; i++)
+			gfar_clean_rx_ring(priv->rx_queue[i],
+					priv->rx_queue[i]->rx_ring_size);
 
 		/* Now we take down the rings to rebuild them */
 		stop_gfar(dev);
@@ -515,7 +555,7 @@
 
 	if (dev->flags & IFF_UP) {
 		err = startup_gfar(dev);
-		netif_wake_queue(dev);
+		netif_tx_wake_all_queues(dev);
 	}
 	return err;
 }
@@ -605,6 +645,241 @@
 }
 #endif
 
+static int gfar_ethflow_to_class(int flow_type, u64 *class)
+{
+	switch (flow_type) {
+	case TCP_V4_FLOW:
+		*class = CLASS_CODE_TCP_IPV4;
+		break;
+	case UDP_V4_FLOW:
+		*class = CLASS_CODE_UDP_IPV4;
+		break;
+	case AH_V4_FLOW:
+	case ESP_V4_FLOW:
+		*class = CLASS_CODE_AH_ESP_IPV4;
+		break;
+	case SCTP_V4_FLOW:
+		*class = CLASS_CODE_SCTP_IPV4;
+		break;
+	case TCP_V6_FLOW:
+		*class = CLASS_CODE_TCP_IPV6;
+		break;
+	case UDP_V6_FLOW:
+		*class = CLASS_CODE_UDP_IPV6;
+		break;
+	case AH_V6_FLOW:
+	case ESP_V6_FLOW:
+		*class = CLASS_CODE_AH_ESP_IPV6;
+		break;
+	case SCTP_V6_FLOW:
+		*class = CLASS_CODE_SCTP_IPV6;
+		break;
+	default:
+		return 0;
+	}
+
+	return 1;
+}
+
+static void ethflow_to_filer_rules (struct gfar_private *priv, u64 ethflow)
+{
+	u32 fcr = 0x0, fpr = FPR_FILER_MASK;
+
+	if (ethflow & RXH_L2DA) {
+		fcr = RQFCR_PID_DAH |RQFCR_CMP_NOMATCH |
+			RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+
+		fcr = RQFCR_PID_DAL | RQFCR_AND | RQFCR_CMP_NOMATCH |
+				RQFCR_HASH | RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_VLAN) {
+		fcr = RQFCR_PID_VID | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+				RQFCR_AND | RQFCR_HASHTBL_0;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_IP_SRC) {
+		fcr = RQFCR_PID_SIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & (RXH_IP_DST)) {
+		fcr = RQFCR_PID_DIA | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L3_PROTO) {
+		fcr = RQFCR_PID_L4P | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L4_B_0_1) {
+		fcr = RQFCR_PID_SPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	if (ethflow & RXH_L4_B_2_3) {
+		fcr = RQFCR_PID_DPT | RQFCR_CMP_NOMATCH | RQFCR_HASH |
+			RQFCR_AND | RQFCR_HASHTBL_0;
+		ftp_rqfpr[priv->cur_filer_idx] = fpr;
+		ftp_rqfcr[priv->cur_filer_idx] = fcr;
+		gfar_write_filer(priv, priv->cur_filer_idx, fcr, fpr);
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+}
+
+static int gfar_ethflow_to_filer_table(struct gfar_private *priv, u64 ethflow, u64 class)
+{
+	unsigned int last_rule_idx = priv->cur_filer_idx;
+	unsigned int cmp_rqfpr;
+	unsigned int local_rqfpr[MAX_FILER_IDX + 1];
+	unsigned int local_rqfcr[MAX_FILER_IDX + 1];
+	int i = 0x0, k = 0x0;
+	int j = MAX_FILER_IDX, l = 0x0;
+
+	switch (class) {
+	case TCP_V4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4 |RQFPR_TCP;
+		break;
+	case UDP_V4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4 |RQFPR_UDP;
+		break;
+	case TCP_V6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6 |RQFPR_TCP;
+		break;
+	case UDP_V6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6 |RQFPR_UDP;
+		break;
+	case IPV4_FLOW:
+		cmp_rqfpr = RQFPR_IPV4;
+	case IPV6_FLOW:
+		cmp_rqfpr = RQFPR_IPV6;
+		break;
+	default:
+		printk(KERN_ERR "Right now this class is not supported\n");
+		return 0;
+	}
+
+	for (i = 0; i < MAX_FILER_IDX + 1; i++) {
+		local_rqfpr[j] = ftp_rqfpr[i];
+		local_rqfcr[j] = ftp_rqfcr[i];
+		j--;
+		if ((ftp_rqfcr[i] == (RQFCR_PID_PARSE |
+			RQFCR_CLE |RQFCR_AND)) &&
+			(ftp_rqfpr[i] == cmp_rqfpr))
+			break;
+	}
+
+	if (i == MAX_FILER_IDX + 1) {
+		printk(KERN_ERR "No parse rule found, ");
+		printk(KERN_ERR "can't create hash rules\n");
+		return 0;
+	}
+
+	/* If a match was found, then it begins the starting of a cluster rule
+	 * if it was already programmed, we need to overwrite these rules
+	 */
+	for (l = i+1; l < MAX_FILER_IDX; l++) {
+		if ((ftp_rqfcr[l] & RQFCR_CLE) &&
+			!(ftp_rqfcr[l] & RQFCR_AND)) {
+			ftp_rqfcr[l] = RQFCR_CLE | RQFCR_CMP_EXACT |
+				RQFCR_HASHTBL_0 | RQFCR_PID_MASK;
+			ftp_rqfpr[l] = FPR_FILER_MASK;
+			gfar_write_filer(priv, l, ftp_rqfcr[l], ftp_rqfpr[l]);
+			break;
+		}
+
+		if (!(ftp_rqfcr[l] & RQFCR_CLE) && (ftp_rqfcr[l] & RQFCR_AND))
+			continue;
+		else {
+			local_rqfpr[j] = ftp_rqfpr[l];
+			local_rqfcr[j] = ftp_rqfcr[l];
+			j--;
+		}
+	}
+
+	priv->cur_filer_idx = l - 1;
+	last_rule_idx = l;
+
+	/* hash rules */
+	ethflow_to_filer_rules(priv, ethflow);
+
+	/* Write back the popped out rules again */
+	for (k = j+1; k < MAX_FILER_IDX; k++) {
+		ftp_rqfpr[priv->cur_filer_idx] = local_rqfpr[k];
+		ftp_rqfcr[priv->cur_filer_idx] = local_rqfcr[k];
+		gfar_write_filer(priv, priv->cur_filer_idx,
+				local_rqfcr[k], local_rqfpr[k]);
+		if (!priv->cur_filer_idx)
+			break;
+		priv->cur_filer_idx = priv->cur_filer_idx - 1;
+	}
+
+	return 1;
+}
+
+static int gfar_set_hash_opts(struct gfar_private *priv, struct ethtool_rxnfc *cmd)
+{
+	u64 class;
+
+	if (!gfar_ethflow_to_class(cmd->flow_type, &class))
+		return -EINVAL;
+
+	if (class < CLASS_CODE_USER_PROG1 ||
+			class > CLASS_CODE_SCTP_IPV6)
+		return -EINVAL;
+
+	/* write the filer rules here */
+	if (!gfar_ethflow_to_filer_table(priv, cmd->data, cmd->flow_type))
+		return -1;
+
+	return 0;
+}
+
+static int gfar_set_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd)
+{
+	struct gfar_private *priv = netdev_priv(dev);
+	int ret = 0;
+
+	switch(cmd->cmd) {
+	case ETHTOOL_SRXFH:
+		ret = gfar_set_hash_opts(priv, cmd);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
 const struct ethtool_ops gfar_ethtool_ops = {
 	.get_settings = gfar_gsettings,
 	.set_settings = gfar_ssettings,
@@ -630,4 +905,5 @@
 	.get_wol = gfar_get_wol,
 	.set_wol = gfar_set_wol,
 #endif
+	.set_rxnfc = gfar_set_nfc,
 };
diff --git a/drivers/net/gianfar_sysfs.c b/drivers/net/gianfar_sysfs.c
index dd26da7..3724835 100644
--- a/drivers/net/gianfar_sysfs.c
+++ b/drivers/net/gianfar_sysfs.c
@@ -8,8 +8,9 @@
  *
  * Author: Andy Fleming
  * Maintainer: Kumar Gala (galak@kernel.crashing.org)
+ * Modifier: Sandeep Gopalpet <sandeep.kumar@freescale.com>
  *
- * Copyright (c) 2002-2005 Freescale Semiconductor, Inc.
+ * Copyright 2002-2009 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -49,6 +50,7 @@
 				 const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	int new_setting = 0;
 	u32 temp;
 	unsigned long flags;
@@ -56,6 +58,7 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BD_STASHING))
 		return count;
 
+
 	/* Find out the new setting */
 	if (!strncmp("on", buf, count - 1) || !strncmp("1", buf, count - 1))
 		new_setting = 1;
@@ -65,21 +68,24 @@
 	else
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+
+	local_irq_save(flags);
+	lock_rx_qs(priv);
 
 	/* Set the new stashing value */
 	priv->bd_stash_en = new_setting;
 
-	temp = gfar_read(&priv->regs->attr);
+	temp = gfar_read(&regs->attr);
 
 	if (new_setting)
 		temp |= ATTR_BDSTASH;
 	else
 		temp &= ~(ATTR_BDSTASH);
 
-	gfar_write(&priv->regs->attr, temp);
+	gfar_write(&regs->attr, temp);
 
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -99,6 +105,7 @@
 				      const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -106,7 +113,9 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	local_irq_save(flags);
+	lock_rx_qs(priv);
+
 	if (length > priv->rx_buffer_size)
 		goto out;
 
@@ -115,23 +124,24 @@
 
 	priv->rx_stash_size = length;
 
-	temp = gfar_read(&priv->regs->attreli);
+	temp = gfar_read(&regs->attreli);
 	temp &= ~ATTRELI_EL_MASK;
 	temp |= ATTRELI_EL(length);
-	gfar_write(&priv->regs->attreli, temp);
+	gfar_write(&regs->attreli, temp);
 
 	/* Turn stashing on/off as appropriate */
-	temp = gfar_read(&priv->regs->attr);
+	temp = gfar_read(&regs->attr);
 
 	if (length)
 		temp |= ATTR_BUFSTASH;
 	else
 		temp &= ~(ATTR_BUFSTASH);
 
-	gfar_write(&priv->regs->attr, temp);
+	gfar_write(&regs->attr, temp);
 
 out:
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -154,6 +164,7 @@
 				       const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned short index = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -161,7 +172,9 @@
 	if (!(priv->device_flags & FSL_GIANFAR_DEV_HAS_BUF_STASHING))
 		return count;
 
-	spin_lock_irqsave(&priv->rxlock, flags);
+	local_irq_save(flags);
+	lock_rx_qs(priv);
+
 	if (index > priv->rx_stash_size)
 		goto out;
 
@@ -170,13 +183,14 @@
 
 	priv->rx_stash_index = index;
 
-	temp = gfar_read(&priv->regs->attreli);
+	temp = gfar_read(&regs->attreli);
 	temp &= ~ATTRELI_EI_MASK;
 	temp |= ATTRELI_EI(index);
-	gfar_write(&priv->regs->attreli, flags);
+	gfar_write(&regs->attreli, flags);
 
 out:
-	spin_unlock_irqrestore(&priv->rxlock, flags);
+	unlock_rx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -198,6 +212,7 @@
 				       const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int length = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -205,16 +220,18 @@
 	if (length > GFAR_MAX_FIFO_THRESHOLD)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_threshold = length;
 
-	temp = gfar_read(&priv->regs->fifo_tx_thr);
+	temp = gfar_read(&regs->fifo_tx_thr);
 	temp &= ~FIFO_TX_THR_MASK;
 	temp |= length;
-	gfar_write(&priv->regs->fifo_tx_thr, temp);
+	gfar_write(&regs->fifo_tx_thr, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -235,6 +252,7 @@
 				    const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -242,16 +260,18 @@
 	if (num > GFAR_MAX_FIFO_STARVE)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_starve = num;
 
-	temp = gfar_read(&priv->regs->fifo_tx_starve);
+	temp = gfar_read(&regs->fifo_tx_starve);
 	temp &= ~FIFO_TX_STARVE_MASK;
 	temp |= num;
-	gfar_write(&priv->regs->fifo_tx_starve, temp);
+	gfar_write(&regs->fifo_tx_starve, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
@@ -273,6 +293,7 @@
 					const char *buf, size_t count)
 {
 	struct gfar_private *priv = netdev_priv(to_net_dev(dev));
+	struct gfar __iomem *regs = priv->gfargrp[0].regs;
 	unsigned int num = simple_strtoul(buf, NULL, 0);
 	u32 temp;
 	unsigned long flags;
@@ -280,16 +301,18 @@
 	if (num > GFAR_MAX_FIFO_STARVE_OFF)
 		return count;
 
-	spin_lock_irqsave(&priv->txlock, flags);
+	local_irq_save(flags);
+	lock_tx_qs(priv);
 
 	priv->fifo_starve_off = num;
 
-	temp = gfar_read(&priv->regs->fifo_tx_starve_shutoff);
+	temp = gfar_read(&regs->fifo_tx_starve_shutoff);
 	temp &= ~FIFO_TX_STARVE_OFF_MASK;
 	temp |= num;
-	gfar_write(&priv->regs->fifo_tx_starve_shutoff, temp);
+	gfar_write(&regs->fifo_tx_starve_shutoff, temp);
 
-	spin_unlock_irqrestore(&priv->txlock, flags);
+	unlock_tx_qs(priv);
+	local_irq_restore(flags);
 
 	return count;
 }
diff --git a/drivers/net/hamachi.c b/drivers/net/hamachi.c
index 1d5064a..18bd9fe 100644
--- a/drivers/net/hamachi.c
+++ b/drivers/net/hamachi.c
@@ -406,10 +406,9 @@
 /* A few values that may be tweaked. */
 /* Size of each temporary Rx buffer, calculated as:
  * 1518 bytes (ethernet packet) + 2 bytes (to get 8 byte alignment for
- * the card) + 8 bytes of status info + 8 bytes for the Rx Checksum +
- * 2 more because we use skb_reserve.
+ * the card) + 8 bytes of status info + 8 bytes for the Rx Checksum
  */
-#define PKT_BUF_SZ		1538
+#define PKT_BUF_SZ		1536
 
 /* For now, this is going to be set to the maximum size of an ethernet
  * packet.  Eventually, we may want to make it a variable that is
@@ -1151,12 +1150,13 @@
 	}
 	/* Fill in the Rx buffers.  Handle allocation failure gracefully. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
-		struct sk_buff *skb = netdev_alloc_skb(dev, hmp->rx_buf_sz);
+		struct sk_buff *skb;
+
+		skb = netdev_alloc_skb_ip_align(dev, hmp->rx_buf_sz);
 		hmp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;
 
-		skb_reserve(skb, 2); /* 16 byte align the IP header. */
                 hmp->rx_ring[i].addr = cpu_to_leXX(pci_map_single(hmp->pci_dev,
 			skb->data, hmp->rx_buf_sz, PCI_DMA_FROMDEVICE));
 		hmp->rx_ring[i].status_n_length = cpu_to_le32(DescOwn |
@@ -1195,7 +1195,7 @@
 	 * card.  -KDU
 	 */
 	hmp->rx_buf_sz = (dev->mtu <= 1492 ? PKT_BUF_SZ :
-		(((dev->mtu+26+7) & ~7) + 2 + 16));
+		(((dev->mtu+26+7) & ~7) + 16));
 
 	/* Initialize all Rx descriptors. */
 	for (i = 0; i < RX_RING_SIZE; i++) {
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index 7bcaf7c..b3cf95d 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -595,16 +595,16 @@
 					if (!(notbitstream & (0x1fc << j)))
 						state = 0;
 
-					/* not flag received */
-					else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) {
+					/* flag received */
+					else if ((bitstream & (0x1fe << j)) == (0x0fc << j)) {
 						if (state)
 							do_rxpacket(dev);
 						bc->hdlcrx.bufcnt = 0;
 						bc->hdlcrx.bufptr = bc->hdlcrx.buf;
 						state = 1;
 						numbits = 7-j;
-						}
 					}
+				}
 
 				/* stuffed bit */
 				else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) {
diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 3fae875..af117c6 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -2149,9 +2149,12 @@
 	return res;
 }
 
-static int emac_ethtool_get_stats_count(struct net_device *ndev)
+static int emac_ethtool_get_sset_count(struct net_device *ndev, int stringset)
 {
-	return EMAC_ETHTOOL_STATS_COUNT;
+	if (stringset == ETH_SS_STATS)
+		return EMAC_ETHTOOL_STATS_COUNT;
+	else
+		return -EINVAL;
 }
 
 static void emac_ethtool_get_strings(struct net_device *ndev, u32 stringset,
@@ -2182,7 +2185,6 @@
 	info->fw_version[0] = '\0';
 	sprintf(info->bus_info, "PPC 4xx EMAC-%d %s",
 		dev->cell_index, dev->ofdev->node->full_name);
-	info->n_stats = emac_ethtool_get_stats_count(ndev);
 	info->regdump_len = emac_ethtool_get_regs_len(ndev);
 }
 
@@ -2202,7 +2204,7 @@
 	.get_rx_csum = emac_ethtool_get_rx_csum,
 
 	.get_strings = emac_ethtool_get_strings,
-	.get_stats_count = emac_ethtool_get_stats_count,
+	.get_sset_count = emac_ethtool_get_sset_count,
 	.get_ethtool_stats = emac_ethtool_get_ethtool_stats,
 
 	.get_link = ethtool_op_get_link,
diff --git a/drivers/net/ifb.c b/drivers/net/ifb.c
index 030913f..69c2566 100644
--- a/drivers/net/ifb.c
+++ b/drivers/net/ifb.c
@@ -98,13 +98,15 @@
 		stats->tx_packets++;
 		stats->tx_bytes +=skb->len;
 
-		skb->dev = dev_get_by_index(&init_net, skb->iif);
+		rcu_read_lock();
+		skb->dev = dev_get_by_index_rcu(&init_net, skb->iif);
 		if (!skb->dev) {
+			rcu_read_unlock();
 			dev_kfree_skb(skb);
 			stats->tx_dropped++;
 			break;
 		}
-		dev_put(skb->dev);
+		rcu_read_unlock();
 		skb->iif = _dev->ifindex;
 
 		if (from & AT_EGRESS) {
diff --git a/drivers/net/igb/e1000_82575.c b/drivers/net/igb/e1000_82575.c
index f8f5772..5d345e3 100644
--- a/drivers/net/igb/e1000_82575.c
+++ b/drivers/net/igb/e1000_82575.c
@@ -81,6 +81,7 @@
 		break;
 	case E1000_DEV_ID_82576:
 	case E1000_DEV_ID_82576_NS:
+	case E1000_DEV_ID_82576_NS_SERDES:
 	case E1000_DEV_ID_82576_FIBER:
 	case E1000_DEV_ID_82576_SERDES:
 	case E1000_DEV_ID_82576_QUAD_COPPER:
@@ -240,9 +241,10 @@
  **/
 static s32 igb_acquire_phy_82575(struct e1000_hw *hw)
 {
-	u16 mask;
+	u16 mask = E1000_SWFW_PHY0_SM;
 
-	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
 
 	return igb_acquire_swfw_sync_82575(hw, mask);
 }
@@ -256,9 +258,11 @@
  **/
 static void igb_release_phy_82575(struct e1000_hw *hw)
 {
-	u16 mask;
+	u16 mask = E1000_SWFW_PHY0_SM;
 
-	mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
+	if (hw->bus.func == E1000_FUNC_1)
+		mask = E1000_SWFW_PHY1_SM;
+
 	igb_release_swfw_sync_82575(hw, mask);
 }
 
@@ -274,45 +278,23 @@
 static s32 igb_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
 					  u16 *data)
 {
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
+	s32 ret_val = -E1000_ERR_PARAM;
 
 	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
 		hw_dbg("PHY Address %u is out of range\n", offset);
-		return -E1000_ERR_PARAM;
+		goto out;
 	}
 
-	/*
-	 * Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  (E1000_I2CCMD_OPCODE_READ));
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
 
-	wr32(E1000_I2CCMD, i2ccmd);
+	ret_val = igb_read_phy_reg_i2c(hw, offset, data);
 
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Read did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
+	hw->phy.ops.release(hw);
 
-	/* Need to byte-swap the 16-bit value. */
-	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
-
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -327,47 +309,24 @@
 static s32 igb_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset,
 					   u16 data)
 {
-	struct e1000_phy_info *phy = &hw->phy;
-	u32 i, i2ccmd = 0;
-	u16 phy_data_swapped;
+	s32 ret_val = -E1000_ERR_PARAM;
+
 
 	if (offset > E1000_MAX_SGMII_PHY_REG_ADDR) {
 		hw_dbg("PHY Address %d is out of range\n", offset);
-		return -E1000_ERR_PARAM;
+		goto out;
 	}
 
-	/* Swap the data bytes for the I2C interface */
-	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+	ret_val = hw->phy.ops.acquire(hw);
+	if (ret_val)
+		goto out;
 
-	/*
-	 * Set up Op-code, Phy Address, and register address in the I2CCMD
-	 * register.  The MAC will take care of interfacing with the
-	 * PHY to retrieve the desired data.
-	 */
-	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
-		  (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
-		  E1000_I2CCMD_OPCODE_WRITE |
-		  phy_data_swapped);
+	ret_val = igb_write_phy_reg_i2c(hw, offset, data);
 
-	wr32(E1000_I2CCMD, i2ccmd);
+	hw->phy.ops.release(hw);
 
-	/* Poll the ready bit to see if the I2C read completed */
-	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
-		udelay(50);
-		i2ccmd = rd32(E1000_I2CCMD);
-		if (i2ccmd & E1000_I2CCMD_READY)
-			break;
-	}
-	if (!(i2ccmd & E1000_I2CCMD_READY)) {
-		hw_dbg("I2CCMD Write did not complete\n");
-		return -E1000_ERR_PHY;
-	}
-	if (i2ccmd & E1000_I2CCMD_ERROR) {
-		hw_dbg("I2CCMD Error bit set\n");
-		return -E1000_ERR_PHY;
-	}
-
-	return 0;
+out:
+	return ret_val;
 }
 
 /**
@@ -706,9 +665,7 @@
 	s32 ret_val;
 	u16 speed, duplex;
 
-	/* SGMII link check is done through the PCS register. */
-	if ((hw->phy.media_type != e1000_media_type_copper) ||
-	    (igb_sgmii_active_82575(hw))) {
+	if (hw->phy.media_type != e1000_media_type_copper) {
 		ret_val = igb_get_pcs_speed_and_duplex_82575(hw, &speed,
 		                                             &duplex);
 		/*
@@ -723,6 +680,7 @@
 
 	return ret_val;
 }
+
 /**
  *  igb_get_pcs_speed_and_duplex_82575 - Retrieve current speed/duplex
  *  @hw: pointer to the HW structure
@@ -788,13 +746,23 @@
 void igb_shutdown_serdes_link_82575(struct e1000_hw *hw)
 {
 	u32 reg;
+	u16 eeprom_data = 0;
 
 	if (hw->phy.media_type != e1000_media_type_internal_serdes ||
 	    igb_sgmii_active_82575(hw))
 		return;
 
-	/* if the management interface is not enabled, then power down */
-	if (!igb_enable_mng_pass_thru(hw)) {
+	if (hw->bus.func == E1000_FUNC_0)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A, 1, &eeprom_data);
+	else if (hw->bus.func == E1000_FUNC_1)
+		hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_B, 1, &eeprom_data);
+
+	/*
+	 * If APM is not enabled in the EEPROM and management interface is
+	 * not enabled, then power down.
+	 */
+	if (!(eeprom_data & E1000_NVM_APME_82575) &&
+	    !igb_enable_mng_pass_thru(hw)) {
 		/* Disable PCS to turn off link */
 		reg = rd32(E1000_PCS_CFG0);
 		reg &= ~E1000_PCS_CFG_PCS_EN;
@@ -908,6 +876,11 @@
 	for (i = 0; i < mac->mta_reg_count; i++)
 		array_wr32(E1000_MTA, i, 0);
 
+	/* Zero out the Unicast HASH table */
+	hw_dbg("Zeroing the UTA\n");
+	for (i = 0; i < mac->uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, 0);
+
 	/* Setup link and flow control */
 	ret_val = igb_setup_link(hw);
 
@@ -934,7 +907,6 @@
 {
 	u32 ctrl;
 	s32  ret_val;
-	bool link;
 
 	ctrl = rd32(E1000_CTRL);
 	ctrl |= E1000_CTRL_SLU;
@@ -967,53 +939,19 @@
 	if (ret_val)
 		goto out;
 
-	if (hw->mac.autoneg) {
-		/*
-		 * Setup autoneg and flow control advertisement
-		 * and perform autonegotiation.
-		 */
-		ret_val = igb_copper_link_autoneg(hw);
-		if (ret_val)
-			goto out;
-	} else {
-		/*
-		 * PHY will be set to 10H, 10F, 100H or 100F
-		 * depending on user settings.
-		 */
-		hw_dbg("Forcing Speed and Duplex\n");
-		ret_val = hw->phy.ops.force_speed_duplex(hw);
-		if (ret_val) {
-			hw_dbg("Error Forcing Speed and Duplex\n");
-			goto out;
-		}
-	}
-
-	/*
-	 * Check link status. Wait up to 100 microseconds for link to become
-	 * valid.
-	 */
-	ret_val = igb_phy_has_link(hw, COPPER_LINK_UP_LIMIT, 10, &link);
-	if (ret_val)
-		goto out;
-
-	if (link) {
-		hw_dbg("Valid link established!!!\n");
-		/* Config the MAC and PHY after link is up */
-		igb_config_collision_dist(hw);
-		ret_val = igb_config_fc_after_link_up(hw);
-	} else {
-		hw_dbg("Unable to establish link!!!\n");
-	}
-
+	ret_val = igb_setup_copper_link(hw);
 out:
 	return ret_val;
 }
 
 /**
- *  igb_setup_serdes_link_82575 - Setup link for fiber/serdes
+ *  igb_setup_serdes_link_82575 - Setup link for serdes
  *  @hw: pointer to the HW structure
  *
- *  Configures speed and duplex for fiber and serdes links.
+ *  Configure the physical coding sub-layer (PCS) link.  The PCS link is
+ *  used on copper connections where the serialized gigabit media independent
+ *  interface (sgmii), or serdes fiber is being used.  Configures the link
+ *  for auto-negotiation or forces speed/duplex.
  **/
 static s32 igb_setup_serdes_link_82575(struct e1000_hw *hw)
 {
@@ -1086,18 +1024,27 @@
 	 */
 	if (hw->mac.autoneg || igb_sgmii_active_82575(hw)) {
 		/* Set PCS register for autoneg */
-		reg |= E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
-		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
-		       E1000_PCS_LCTL_AN_ENABLE |     /* Enable Autoneg */
-		       E1000_PCS_LCTL_AN_RESTART;     /* Restart autoneg */
+		reg |= E1000_PCS_LCTL_FSV_1000 |  /* Force 1000 */
+		       E1000_PCS_LCTL_FDV_FULL |  /* SerDes Full dplx */
+		       E1000_PCS_LCTL_AN_ENABLE | /* Enable Autoneg */
+		       E1000_PCS_LCTL_AN_RESTART; /* Restart autoneg */
 		hw_dbg("Configuring Autoneg; PCS_LCTL = 0x%08X\n", reg);
 	} else {
-		/* Set PCS register for forced speed */
-		reg |= E1000_PCS_LCTL_FLV_LINK_UP |   /* Force link up */
-		       E1000_PCS_LCTL_FSV_1000 |      /* Force 1000    */
-		       E1000_PCS_LCTL_FDV_FULL |      /* SerDes Full duplex */
-		       E1000_PCS_LCTL_FSD |           /* Force Speed */
-		       E1000_PCS_LCTL_FORCE_LINK;     /* Force Link */
+		/* Check for duplex first */
+		if (hw->mac.forced_speed_duplex & E1000_ALL_FULL_DUPLEX)
+			reg |= E1000_PCS_LCTL_FDV_FULL;
+
+		/* No need to check for 1000/full since the spec states that
+		 * it requires autoneg to be enabled */
+		/* Now set speed */
+		if (hw->mac.forced_speed_duplex & E1000_ALL_100_SPEED)
+			reg |= E1000_PCS_LCTL_FSV_100;
+
+		/* Force speed and force link */
+		reg |= E1000_PCS_LCTL_FSD |
+		       E1000_PCS_LCTL_FORCE_LINK |
+		       E1000_PCS_LCTL_FLV_LINK_UP;
+
 		hw_dbg("Configuring Forced Link; PCS_LCTL = 0x%08X\n", reg);
 	}
 
@@ -1167,9 +1114,18 @@
 {
 	s32 ret_val = 0;
 
-	if (igb_check_alt_mac_addr(hw))
-		ret_val = igb_read_mac_addr(hw);
+	/*
+	 * If there's an alternate MAC address place it in RAR0
+	 * so that it will override the Si installed default perm
+	 * address.
+	 */
+	ret_val = igb_check_alt_mac_addr(hw);
+	if (ret_val)
+		goto out;
 
+	ret_val = igb_read_mac_addr(hw);
+
+out:
 	return ret_val;
 }
 
@@ -1181,61 +1137,59 @@
  **/
 static void igb_clear_hw_cntrs_82575(struct e1000_hw *hw)
 {
-	u32 temp;
-
 	igb_clear_hw_cntrs_base(hw);
 
-	temp = rd32(E1000_PRC64);
-	temp = rd32(E1000_PRC127);
-	temp = rd32(E1000_PRC255);
-	temp = rd32(E1000_PRC511);
-	temp = rd32(E1000_PRC1023);
-	temp = rd32(E1000_PRC1522);
-	temp = rd32(E1000_PTC64);
-	temp = rd32(E1000_PTC127);
-	temp = rd32(E1000_PTC255);
-	temp = rd32(E1000_PTC511);
-	temp = rd32(E1000_PTC1023);
-	temp = rd32(E1000_PTC1522);
+	rd32(E1000_PRC64);
+	rd32(E1000_PRC127);
+	rd32(E1000_PRC255);
+	rd32(E1000_PRC511);
+	rd32(E1000_PRC1023);
+	rd32(E1000_PRC1522);
+	rd32(E1000_PTC64);
+	rd32(E1000_PTC127);
+	rd32(E1000_PTC255);
+	rd32(E1000_PTC511);
+	rd32(E1000_PTC1023);
+	rd32(E1000_PTC1522);
 
-	temp = rd32(E1000_ALGNERRC);
-	temp = rd32(E1000_RXERRC);
-	temp = rd32(E1000_TNCRS);
-	temp = rd32(E1000_CEXTERR);
-	temp = rd32(E1000_TSCTC);
-	temp = rd32(E1000_TSCTFC);
+	rd32(E1000_ALGNERRC);
+	rd32(E1000_RXERRC);
+	rd32(E1000_TNCRS);
+	rd32(E1000_CEXTERR);
+	rd32(E1000_TSCTC);
+	rd32(E1000_TSCTFC);
 
-	temp = rd32(E1000_MGTPRC);
-	temp = rd32(E1000_MGTPDC);
-	temp = rd32(E1000_MGTPTC);
+	rd32(E1000_MGTPRC);
+	rd32(E1000_MGTPDC);
+	rd32(E1000_MGTPTC);
 
-	temp = rd32(E1000_IAC);
-	temp = rd32(E1000_ICRXOC);
+	rd32(E1000_IAC);
+	rd32(E1000_ICRXOC);
 
-	temp = rd32(E1000_ICRXPTC);
-	temp = rd32(E1000_ICRXATC);
-	temp = rd32(E1000_ICTXPTC);
-	temp = rd32(E1000_ICTXATC);
-	temp = rd32(E1000_ICTXQEC);
-	temp = rd32(E1000_ICTXQMTC);
-	temp = rd32(E1000_ICRXDMTC);
+	rd32(E1000_ICRXPTC);
+	rd32(E1000_ICRXATC);
+	rd32(E1000_ICTXPTC);
+	rd32(E1000_ICTXATC);
+	rd32(E1000_ICTXQEC);
+	rd32(E1000_ICTXQMTC);
+	rd32(E1000_ICRXDMTC);
 
-	temp = rd32(E1000_CBTMPC);
-	temp = rd32(E1000_HTDPMC);
-	temp = rd32(E1000_CBRMPC);
-	temp = rd32(E1000_RPTHC);
-	temp = rd32(E1000_HGPTC);
-	temp = rd32(E1000_HTCBDPC);
-	temp = rd32(E1000_HGORCL);
-	temp = rd32(E1000_HGORCH);
-	temp = rd32(E1000_HGOTCL);
-	temp = rd32(E1000_HGOTCH);
-	temp = rd32(E1000_LENERRS);
+	rd32(E1000_CBTMPC);
+	rd32(E1000_HTDPMC);
+	rd32(E1000_CBRMPC);
+	rd32(E1000_RPTHC);
+	rd32(E1000_HGPTC);
+	rd32(E1000_HTCBDPC);
+	rd32(E1000_HGORCL);
+	rd32(E1000_HGORCH);
+	rd32(E1000_HGOTCL);
+	rd32(E1000_HGOTCH);
+	rd32(E1000_LENERRS);
 
 	/* This register should not be read in copper configurations */
 	if (hw->phy.media_type == e1000_media_type_internal_serdes ||
 	    igb_sgmii_active_82575(hw))
-		temp = rd32(E1000_SCVPC);
+		rd32(E1000_SCVPC);
 }
 
 /**
diff --git a/drivers/net/igb/e1000_82575.h b/drivers/net/igb/e1000_82575.h
index ebd146f..b3808ca 100644
--- a/drivers/net/igb/e1000_82575.h
+++ b/drivers/net/igb/e1000_82575.h
@@ -66,6 +66,8 @@
     E1000_EICR_RX_QUEUE3)
 
 /* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */
+#define E1000_IMIREXT_SIZE_BP     0x00001000  /* Packet size bypass */
+#define E1000_IMIREXT_CTRL_BP     0x00080000  /* Bypass check of ctrl bits */
 
 /* Receive Descriptor - Advanced */
 union e1000_adv_rx_desc {
@@ -98,6 +100,7 @@
 
 #define E1000_RXDADV_HDRBUFLEN_MASK      0x7FE0
 #define E1000_RXDADV_HDRBUFLEN_SHIFT     5
+#define E1000_RXDADV_STAT_TS             0x10000 /* Pkt was time stamped */
 
 /* Transmit Descriptor - Advanced */
 union e1000_adv_tx_desc {
@@ -167,6 +170,18 @@
 #define E1000_DCA_TXCTRL_CPUID_SHIFT 24 /* Tx CPUID now in the last byte */
 #define E1000_DCA_RXCTRL_CPUID_SHIFT 24 /* Rx CPUID now in the last byte */
 
+/* ETQF register bit definitions */
+#define E1000_ETQF_FILTER_ENABLE   (1 << 26)
+#define E1000_ETQF_1588            (1 << 30)
+
+/* FTQF register bit definitions */
+#define E1000_FTQF_VF_BP               0x00008000
+#define E1000_FTQF_1588_TIME_STAMP     0x08000000
+#define E1000_FTQF_MASK                0xF0000000
+#define E1000_FTQF_MASK_PROTO_BP       0x10000000
+#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000
+
+#define E1000_NVM_APME_82575          0x0400
 #define MAX_NUM_VFS                   8
 
 #define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31)  /* global VF LB enable */
@@ -202,8 +217,19 @@
 #define E1000_IOVCTL 0x05BBC
 #define E1000_IOVCTL_REUSE_VFQ 0x00000001
 
+#define E1000_RPLOLR_STRVLAN   0x40000000
+#define E1000_RPLOLR_STRCRC    0x80000000
+
+#define E1000_DTXCTL_8023LL     0x0004
+#define E1000_DTXCTL_VLAN_ADDED 0x0008
+#define E1000_DTXCTL_OOS_ENABLE 0x0010
+#define E1000_DTXCTL_MDP_EN     0x0020
+#define E1000_DTXCTL_SPOOF_INT  0x0040
+
 #define ALL_QUEUES   0xFFFF
 
+/* RX packet buffer size defines */
+#define E1000_RXPBS_SIZE_MASK_82576  0x0000007F
 void igb_vmdq_set_loopback_pf(struct e1000_hw *, bool);
 void igb_vmdq_set_replication_pf(struct e1000_hw *, bool);
 
diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index cb91683..48fcab0 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -435,6 +435,39 @@
 /* Flow Control */
 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
 
+#define E1000_TSYNCTXCTL_VALID    0x00000001 /* tx timestamp valid */
+#define E1000_TSYNCTXCTL_ENABLED  0x00000010 /* enable tx timestampping */
+
+#define E1000_TSYNCRXCTL_VALID      0x00000001 /* rx timestamp valid */
+#define E1000_TSYNCRXCTL_TYPE_MASK  0x0000000E /* rx type mask */
+#define E1000_TSYNCRXCTL_TYPE_L2_V2       0x00
+#define E1000_TSYNCRXCTL_TYPE_L4_V1       0x02
+#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2    0x04
+#define E1000_TSYNCRXCTL_TYPE_ALL         0x08
+#define E1000_TSYNCRXCTL_TYPE_EVENT_V2    0x0A
+#define E1000_TSYNCRXCTL_ENABLED    0x00000010 /* enable rx timestampping */
+
+#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK   0x000000FF
+#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE       0x00
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE  0x01
+#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE   0x02
+#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03
+#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04
+
+#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK               0x00000F00
+#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE                 0x0000
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE            0x0100
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE       0x0200
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE      0x0300
+#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE             0x0800
+#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE           0x0900
+#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE  0x0A00
+#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE             0x0B00
+#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE           0x0C00
+#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE           0x0D00
+
+#define E1000_TIMINCA_16NS_SHIFT 24
+
 /* PCI Express Control */
 #define E1000_GCR_CMPL_TMOUT_MASK       0x0000F000
 #define E1000_GCR_CMPL_TMOUT_10ms       0x00001000
diff --git a/drivers/net/igb/e1000_hw.h b/drivers/net/igb/e1000_hw.h
index 119869b..2dc9294 100644
--- a/drivers/net/igb/e1000_hw.h
+++ b/drivers/net/igb/e1000_hw.h
@@ -42,6 +42,7 @@
 #define E1000_DEV_ID_82576_SERDES             0x10E7
 #define E1000_DEV_ID_82576_QUAD_COPPER        0x10E8
 #define E1000_DEV_ID_82576_NS                 0x150A
+#define E1000_DEV_ID_82576_NS_SERDES          0x1518
 #define E1000_DEV_ID_82576_SERDES_QUAD        0x150D
 #define E1000_DEV_ID_82575EB_COPPER           0x10A7
 #define E1000_DEV_ID_82575EB_FIBER_SERDES     0x10A9
@@ -50,8 +51,11 @@
 #define E1000_REVISION_2 2
 #define E1000_REVISION_4 4
 
+#define E1000_FUNC_0     0
 #define E1000_FUNC_1     1
 
+#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1   3
+
 enum e1000_mac_type {
 	e1000_undefined = 0,
 	e1000_82575,
@@ -70,7 +74,6 @@
 	e1000_nvm_unknown = 0,
 	e1000_nvm_none,
 	e1000_nvm_eeprom_spi,
-	e1000_nvm_eeprom_microwire,
 	e1000_nvm_flash_hw,
 	e1000_nvm_flash_sw
 };
@@ -79,8 +82,6 @@
 	e1000_nvm_override_none = 0,
 	e1000_nvm_override_spi_small,
 	e1000_nvm_override_spi_large,
-	e1000_nvm_override_microwire_small,
-	e1000_nvm_override_microwire_large
 };
 
 enum e1000_phy_type {
@@ -339,6 +340,7 @@
 	u16 ifs_ratio;
 	u16 ifs_step_size;
 	u16 mta_reg_count;
+	u16 uta_reg_count;
 
 	/* Maximum size of the MTA register table in all supported adapters */
 	#define MAX_MTA_REG 128
diff --git a/drivers/net/igb/e1000_mac.c b/drivers/net/igb/e1000_mac.c
index 7d76bb0..2ad358a 100644
--- a/drivers/net/igb/e1000_mac.c
+++ b/drivers/net/igb/e1000_mac.c
@@ -185,13 +185,12 @@
 	}
 
 	if (nvm_alt_mac_addr_offset == 0xFFFF) {
-		ret_val = -(E1000_NOT_IMPLEMENTED);
+		/* There is no Alternate MAC Address */
 		goto out;
 	}
 
 	if (hw->bus.func == E1000_FUNC_1)
-		nvm_alt_mac_addr_offset += ETH_ALEN/sizeof(u16);
-
+		nvm_alt_mac_addr_offset += E1000_ALT_MAC_ADDRESS_OFFSET_LAN1;
 	for (i = 0; i < ETH_ALEN; i += 2) {
 		offset = nvm_alt_mac_addr_offset + (i >> 1);
 		ret_val = hw->nvm.ops.read(hw, offset, 1, &nvm_data);
@@ -206,14 +205,16 @@
 
 	/* if multicast bit is set, the alternate address will not be used */
 	if (alt_mac_addr[0] & 0x01) {
-		ret_val = -(E1000_NOT_IMPLEMENTED);
+		hw_dbg("Ignoring Alternate Mac Address with MC bit set\n");
 		goto out;
 	}
 
-	for (i = 0; i < ETH_ALEN; i++)
-		hw->mac.addr[i] = hw->mac.perm_addr[i] = alt_mac_addr[i];
-
-	hw->mac.ops.rar_set(hw, hw->mac.perm_addr, 0);
+	/*
+	 * We have a valid alternate MAC address, and we want to treat it the
+	 * same as the normal permanent MAC address stored by the HW into the
+	 * RAR. Do this by mapping this address into RAR0.
+	 */
+	hw->mac.ops.rar_set(hw, alt_mac_addr, 0);
 
 out:
 	return ret_val;
@@ -246,8 +247,15 @@
 	if (rar_low || rar_high)
 		rar_high |= E1000_RAH_AV;
 
+	/*
+	 * Some bridges will combine consecutive 32-bit writes into
+	 * a single burst write, which will malfunction on some parts.
+	 * The flushes avoid this.
+	 */
 	wr32(E1000_RAL(index), rar_low);
+	wrfl();
 	wr32(E1000_RAH(index), rar_high);
+	wrfl();
 }
 
 /**
@@ -399,45 +407,43 @@
  **/
 void igb_clear_hw_cntrs_base(struct e1000_hw *hw)
 {
-	u32 temp;
-
-	temp = rd32(E1000_CRCERRS);
-	temp = rd32(E1000_SYMERRS);
-	temp = rd32(E1000_MPC);
-	temp = rd32(E1000_SCC);
-	temp = rd32(E1000_ECOL);
-	temp = rd32(E1000_MCC);
-	temp = rd32(E1000_LATECOL);
-	temp = rd32(E1000_COLC);
-	temp = rd32(E1000_DC);
-	temp = rd32(E1000_SEC);
-	temp = rd32(E1000_RLEC);
-	temp = rd32(E1000_XONRXC);
-	temp = rd32(E1000_XONTXC);
-	temp = rd32(E1000_XOFFRXC);
-	temp = rd32(E1000_XOFFTXC);
-	temp = rd32(E1000_FCRUC);
-	temp = rd32(E1000_GPRC);
-	temp = rd32(E1000_BPRC);
-	temp = rd32(E1000_MPRC);
-	temp = rd32(E1000_GPTC);
-	temp = rd32(E1000_GORCL);
-	temp = rd32(E1000_GORCH);
-	temp = rd32(E1000_GOTCL);
-	temp = rd32(E1000_GOTCH);
-	temp = rd32(E1000_RNBC);
-	temp = rd32(E1000_RUC);
-	temp = rd32(E1000_RFC);
-	temp = rd32(E1000_ROC);
-	temp = rd32(E1000_RJC);
-	temp = rd32(E1000_TORL);
-	temp = rd32(E1000_TORH);
-	temp = rd32(E1000_TOTL);
-	temp = rd32(E1000_TOTH);
-	temp = rd32(E1000_TPR);
-	temp = rd32(E1000_TPT);
-	temp = rd32(E1000_MPTC);
-	temp = rd32(E1000_BPTC);
+	rd32(E1000_CRCERRS);
+	rd32(E1000_SYMERRS);
+	rd32(E1000_MPC);
+	rd32(E1000_SCC);
+	rd32(E1000_ECOL);
+	rd32(E1000_MCC);
+	rd32(E1000_LATECOL);
+	rd32(E1000_COLC);
+	rd32(E1000_DC);
+	rd32(E1000_SEC);
+	rd32(E1000_RLEC);
+	rd32(E1000_XONRXC);
+	rd32(E1000_XONTXC);
+	rd32(E1000_XOFFRXC);
+	rd32(E1000_XOFFTXC);
+	rd32(E1000_FCRUC);
+	rd32(E1000_GPRC);
+	rd32(E1000_BPRC);
+	rd32(E1000_MPRC);
+	rd32(E1000_GPTC);
+	rd32(E1000_GORCL);
+	rd32(E1000_GORCH);
+	rd32(E1000_GOTCL);
+	rd32(E1000_GOTCH);
+	rd32(E1000_RNBC);
+	rd32(E1000_RUC);
+	rd32(E1000_RFC);
+	rd32(E1000_ROC);
+	rd32(E1000_RJC);
+	rd32(E1000_TORL);
+	rd32(E1000_TORH);
+	rd32(E1000_TOTL);
+	rd32(E1000_TOTH);
+	rd32(E1000_TPR);
+	rd32(E1000_TPT);
+	rd32(E1000_MPTC);
+	rd32(E1000_BPTC);
 }
 
 /**
diff --git a/drivers/net/igb/e1000_mbx.c b/drivers/net/igb/e1000_mbx.c
index ed9058e..c474cdb 100644
--- a/drivers/net/igb/e1000_mbx.c
+++ b/drivers/net/igb/e1000_mbx.c
@@ -143,12 +143,16 @@
 	if (!countdown || !mbx->ops.check_for_msg)
 		goto out;
 
-	while (mbx->ops.check_for_msg(hw, mbx_id)) {
+	while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) {
 		countdown--;
 		if (!countdown)
 			break;
 		udelay(mbx->usec_delay);
 	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
 out:
 	return countdown ? 0 : -E1000_ERR_MBX;
 }
@@ -168,12 +172,16 @@
 	if (!countdown || !mbx->ops.check_for_ack)
 		goto out;
 
-	while (mbx->ops.check_for_ack(hw, mbx_id)) {
+	while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) {
 		countdown--;
 		if (!countdown)
 			break;
 		udelay(mbx->usec_delay);
 	}
+
+	/* if we failed, all future posted messages fail until reset */
+	if (!countdown)
+		mbx->timeout = 0;
 out:
 	return countdown ? 0 : -E1000_ERR_MBX;
 }
@@ -217,12 +225,13 @@
 static s32 igb_write_posted_mbx(struct e1000_hw *hw, u32 *msg, u16 size, u16 mbx_id)
 {
 	struct e1000_mbx_info *mbx = &hw->mbx;
-	s32 ret_val = 0;
+	s32 ret_val = -E1000_ERR_MBX;
 
-	if (!mbx->ops.write)
+	/* exit if either we can't write or there isn't a defined timeout */
+	if (!mbx->ops.write || !mbx->timeout)
 		goto out;
 
-	/* send msg*/
+	/* send msg */
 	ret_val = mbx->ops.write(hw, msg, size, mbx_id);
 
 	/* if msg sent wait until we receive an ack */
@@ -305,6 +314,30 @@
 }
 
 /**
+ *  igb_obtain_mbx_lock_pf - obtain mailbox lock
+ *  @hw: pointer to the HW structure
+ *  @vf_number: the VF index
+ *
+ *  return SUCCESS if we obtained the mailbox lock
+ **/
+static s32 igb_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number)
+{
+	s32 ret_val = -E1000_ERR_MBX;
+	u32 p2v_mailbox;
+
+
+	/* Take ownership of the buffer */
+	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
+
+	/* reserve mailbox for vf use */
+	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
+	if (p2v_mailbox & E1000_P2VMAILBOX_PFU)
+		ret_val = 0;
+
+	return ret_val;
+}
+
+/**
  *  igb_write_mbx_pf - Places a message in the mailbox
  *  @hw: pointer to the HW structure
  *  @msg: The message buffer
@@ -316,27 +349,17 @@
 static s32 igb_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
                               u16 vf_number)
 {
-	u32 p2v_mailbox;
-	s32 ret_val = 0;
+	s32 ret_val;
 	u16 i;
 
-	/* Take ownership of the buffer */
-	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
-	/* Make sure we have ownership now... */
-	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
-	if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) {
-		/* failed to grab ownership */
-		ret_val = -E1000_ERR_MBX;
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
 		goto out_no_write;
-	}
 
-	/*
-	 * flush any ack or msg which may already be in the queue
-	 * as they are likely the result of an error
-	 */
-	igb_check_for_ack_pf(hw, vf_number);
+	/* flush msg and acks as we are overwriting the message buffer */
 	igb_check_for_msg_pf(hw, vf_number);
+	igb_check_for_ack_pf(hw, vf_number);
 
 	/* copy the caller specified message to the mailbox memory buffer */
 	for (i = 0; i < size; i++)
@@ -367,20 +390,13 @@
 static s32 igb_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size,
                              u16 vf_number)
 {
-	u32 p2v_mailbox;
-	s32 ret_val = 0;
+	s32 ret_val;
 	u16 i;
 
-	/* Take ownership of the buffer */
-	wr32(E1000_P2VMAILBOX(vf_number), E1000_P2VMAILBOX_PFU);
-
-	/* Make sure we have ownership now... */
-	p2v_mailbox = rd32(E1000_P2VMAILBOX(vf_number));
-	if (!(p2v_mailbox & E1000_P2VMAILBOX_PFU)) {
-		/* failed to grab ownership */
-		ret_val = -E1000_ERR_MBX;
+	/* lock the mailbox to prevent pf/vf race condition */
+	ret_val = igb_obtain_mbx_lock_pf(hw, vf_number);
+	if (ret_val)
 		goto out_no_read;
-	}
 
 	/* copy the message to the mailbox memory buffer */
 	for (i = 0; i < size; i++)
@@ -392,8 +408,6 @@
 	/* update stats */
 	hw->mbx.stats.msgs_rx++;
 
-	ret_val = 0;
-
 out_no_read:
 	return ret_val;
 }
diff --git a/drivers/net/igb/e1000_mbx.h b/drivers/net/igb/e1000_mbx.h
index ebc02ea..bb112fb 100644
--- a/drivers/net/igb/e1000_mbx.h
+++ b/drivers/net/igb/e1000_mbx.h
@@ -58,10 +58,12 @@
 #define E1000_VT_MSGINFO_MASK     (0xFF << E1000_VT_MSGINFO_SHIFT)
 
 #define E1000_VF_RESET            0x01 /* VF requests reset */
-#define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests PF to set MAC addr */
-#define E1000_VF_SET_MULTICAST    0x03 /* VF requests PF to set MC addr */
-#define E1000_VF_SET_VLAN         0x04 /* VF requests PF to set VLAN */
-#define E1000_VF_SET_LPE          0x05 /* VF requests PF to set VMOLR.LPE */
+#define E1000_VF_SET_MAC_ADDR     0x02 /* VF requests to set MAC addr */
+#define E1000_VF_SET_MULTICAST    0x03 /* VF requests to set MC addr */
+#define E1000_VF_SET_VLAN         0x04 /* VF requests to set VLAN */
+#define E1000_VF_SET_LPE          0x05 /* VF requests to set VMOLR.LPE */
+#define E1000_VF_SET_PROMISC      0x06 /*VF requests to clear VMOLR.ROPE/MPME*/
+#define E1000_VF_SET_PROMISC_MULTICAST    (0x02 << E1000_VT_MSGINFO_SHIFT)
 
 #define E1000_PF_CONTROL_MSG      0x0100 /* PF control message */
 
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
index a88bfe2..d83b77fa 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/igb/e1000_nvm.c
@@ -78,9 +78,7 @@
 	u32 mask;
 
 	mask = 0x01 << (count - 1);
-	if (nvm->type == e1000_nvm_eeprom_microwire)
-		eecd &= ~E1000_EECD_DO;
-	else if (nvm->type == e1000_nvm_eeprom_spi)
+	if (nvm->type == e1000_nvm_eeprom_spi)
 		eecd |= E1000_EECD_DO;
 
 	do {
@@ -220,22 +218,7 @@
 	struct e1000_nvm_info *nvm = &hw->nvm;
 	u32 eecd = rd32(E1000_EECD);
 
-	if (nvm->type == e1000_nvm_eeprom_microwire) {
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
-		wr32(E1000_EECD, eecd);
-		wrfl();
-		udelay(nvm->delay_usec);
-
-		igb_raise_eec_clk(hw, &eecd);
-
-		/* Select EEPROM */
-		eecd |= E1000_EECD_CS;
-		wr32(E1000_EECD, eecd);
-		wrfl();
-		udelay(nvm->delay_usec);
-
-		igb_lower_eec_clk(hw, &eecd);
-	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+	if (nvm->type == e1000_nvm_eeprom_spi) {
 		/* Toggle CS to flush commands */
 		eecd |= E1000_EECD_CS;
 		wr32(E1000_EECD, eecd);
@@ -263,12 +246,6 @@
 		/* Pull CS high */
 		eecd |= E1000_EECD_CS;
 		igb_lower_eec_clk(hw, &eecd);
-	} else if (hw->nvm.type == e1000_nvm_eeprom_microwire) {
-		/* CS on Microcwire is active-high */
-		eecd &= ~(E1000_EECD_CS | E1000_EECD_DI);
-		wr32(E1000_EECD, eecd);
-		igb_raise_eec_clk(hw, &eecd);
-		igb_lower_eec_clk(hw, &eecd);
 	}
 }
 
@@ -304,14 +281,7 @@
 	u8 spi_stat_reg;
 
 
-	if (nvm->type == e1000_nvm_eeprom_microwire) {
-		/* Clear SK and DI */
-		eecd &= ~(E1000_EECD_DI | E1000_EECD_SK);
-		wr32(E1000_EECD, eecd);
-		/* Set CS */
-		eecd |= E1000_EECD_CS;
-		wr32(E1000_EECD, eecd);
-	} else if (nvm->type == e1000_nvm_eeprom_spi) {
+	if (nvm->type == e1000_nvm_eeprom_spi) {
 		/* Clear SK and CS */
 		eecd &= ~(E1000_EECD_CS | E1000_EECD_SK);
 		wr32(E1000_EECD, eecd);
diff --git a/drivers/net/igb/e1000_phy.c b/drivers/net/igb/e1000_phy.c
index ee46060..83b706c 100644
--- a/drivers/net/igb/e1000_phy.c
+++ b/drivers/net/igb/e1000_phy.c
@@ -39,6 +39,9 @@
 /* Cable length tables */
 static const u16 e1000_m88_cable_length_table[] =
 	{ 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED };
+#define M88E1000_CABLE_LENGTH_TABLE_SIZE \
+                (sizeof(e1000_m88_cable_length_table) / \
+                 sizeof(e1000_m88_cable_length_table[0]))
 
 static const u16 e1000_igp_2_cable_length_table[] =
     { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21,
@@ -109,7 +112,10 @@
  **/
 static s32 igb_phy_reset_dsp(struct e1000_hw *hw)
 {
-	s32 ret_val;
+	s32 ret_val = 0;
+
+	if (!(hw->phy.ops.write_reg))
+		goto out;
 
 	ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1);
 	if (ret_val)
@@ -239,6 +245,103 @@
 }
 
 /**
+ *  igb_read_phy_reg_i2c - Read PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to be read
+ *  @data: pointer to the read data
+ *
+ *  Reads the PHY register at offset using the i2c interface and stores the
+ *  retrieved information in data.
+ **/
+s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          (E1000_I2CCMD_OPCODE_READ));
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Read did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	/* Need to byte-swap the 16-bit value. */
+	*data = ((i2ccmd >> 8) & 0x00FF) | ((i2ccmd << 8) & 0xFF00);
+
+	return 0;
+}
+
+/**
+ *  igb_write_phy_reg_i2c - Write PHY register using i2c
+ *  @hw: pointer to the HW structure
+ *  @offset: register offset to write to
+ *  @data: data to write at register offset
+ *
+ *  Writes the data to PHY register at the offset using the i2c interface.
+ **/
+s32 igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data)
+{
+	struct e1000_phy_info *phy = &hw->phy;
+	u32 i, i2ccmd = 0;
+	u16 phy_data_swapped;
+
+
+	/* Swap the data bytes for the I2C interface */
+	phy_data_swapped = ((data >> 8) & 0x00FF) | ((data << 8) & 0xFF00);
+
+	/*
+	 * Set up Op-code, Phy Address, and register address in the I2CCMD
+	 * register.  The MAC will take care of interfacing with the
+	 * PHY to retrieve the desired data.
+	 */
+	i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) |
+	          (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) |
+	          E1000_I2CCMD_OPCODE_WRITE |
+	          phy_data_swapped);
+
+	wr32(E1000_I2CCMD, i2ccmd);
+
+	/* Poll the ready bit to see if the I2C read completed */
+	for (i = 0; i < E1000_I2CCMD_PHY_TIMEOUT; i++) {
+		udelay(50);
+		i2ccmd = rd32(E1000_I2CCMD);
+		if (i2ccmd & E1000_I2CCMD_READY)
+			break;
+	}
+	if (!(i2ccmd & E1000_I2CCMD_READY)) {
+		hw_dbg("I2CCMD Write did not complete\n");
+		return -E1000_ERR_PHY;
+	}
+	if (i2ccmd & E1000_I2CCMD_ERROR) {
+		hw_dbg("I2CCMD Error bit set\n");
+		return -E1000_ERR_PHY;
+	}
+
+	return 0;
+}
+
+/**
  *  igb_read_phy_reg_igp - Read igp PHY register
  *  @hw: pointer to the HW structure
  *  @offset: register offset to be read
@@ -572,7 +675,7 @@
  *  and restart the negotiation process between the link partner.  If
  *  autoneg_wait_to_complete, then wait for autoneg to complete before exiting.
  **/
-s32 igb_copper_link_autoneg(struct e1000_hw *hw)
+static s32 igb_copper_link_autoneg(struct e1000_hw *hw)
 {
 	struct e1000_phy_info *phy = &hw->phy;
 	s32 ret_val;
@@ -796,6 +899,65 @@
 }
 
 /**
+ *  igb_setup_copper_link - Configure copper link settings
+ *  @hw: pointer to the HW structure
+ *
+ *  Calls the appropriate function to configure the link for auto-neg or forced
+ *  speed and duplex.  Then we check for link, once link is established calls
+ *  to configure collision distance and flow control are called.  If link is
+ *  not established, we return -E1000_ERR_PHY (-2).
+ **/
+s32 igb_setup_copper_link(struct e1000_hw *hw)
+{
+	s32 ret_val;
+	bool link;
+
+
+	if (hw->mac.autoneg) {
+		/*
+		 * Setup autoneg and flow control advertisement and perform
+		 * autonegotiation.
+		 */
+		ret_val = igb_copper_link_autoneg(hw);
+		if (ret_val)
+			goto out;
+	} else {
+		/*
+		 * PHY will be set to 10H, 10F, 100H or 100F
+		 * depending on user settings.
+		 */
+		hw_dbg("Forcing Speed and Duplex\n");
+		ret_val = hw->phy.ops.force_speed_duplex(hw);
+		if (ret_val) {
+			hw_dbg("Error Forcing Speed and Duplex\n");
+			goto out;
+		}
+	}
+
+	/*
+	 * Check link status. Wait up to 100 microseconds for link to become
+	 * valid.
+	 */
+	ret_val = igb_phy_has_link(hw,
+	                           COPPER_LINK_UP_LIMIT,
+	                           10,
+	                           &link);
+	if (ret_val)
+		goto out;
+
+	if (link) {
+		hw_dbg("Valid link established!!!\n");
+		igb_config_collision_dist(hw);
+		ret_val = igb_config_fc_after_link_up(hw);
+	} else {
+		hw_dbg("Unable to establish link!!!\n");
+	}
+
+out:
+	return ret_val;
+}
+
+/**
  *  igb_phy_force_speed_duplex_igp - Force speed/duplex for igp PHY
  *  @hw: pointer to the HW structure
  *
@@ -903,22 +1065,19 @@
 
 	igb_phy_force_speed_duplex_setup(hw, &phy_data);
 
-	/* Reset the phy to commit changes. */
-	phy_data |= MII_CR_RESET;
-
 	ret_val = phy->ops.write_reg(hw, PHY_CONTROL, phy_data);
 	if (ret_val)
 		goto out;
 
-	udelay(1);
+	/* Reset the phy to commit changes. */
+	ret_val = igb_phy_sw_reset(hw);
+	if (ret_val)
+		goto out;
 
 	if (phy->autoneg_wait_to_complete) {
 		hw_dbg("Waiting for forced speed/duplex link on M88 phy.\n");
 
-		ret_val = igb_phy_has_link(hw,
-						     PHY_FORCE_LIMIT,
-						     100000,
-						     &link);
+		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT, 100000, &link);
 		if (ret_val)
 			goto out;
 
@@ -928,8 +1087,8 @@
 			 * Reset the DSP and cross our fingers.
 			 */
 			ret_val = phy->ops.write_reg(hw,
-						      M88E1000_PHY_PAGE_SELECT,
-						      0x001d);
+						     M88E1000_PHY_PAGE_SELECT,
+						     0x001d);
 			if (ret_val)
 				goto out;
 			ret_val = igb_phy_reset_dsp(hw);
@@ -939,7 +1098,7 @@
 
 		/* Try once more */
 		ret_val = igb_phy_has_link(hw, PHY_FORCE_LIMIT,
-					     100000, &link);
+					   100000, &link);
 		if (ret_val)
 			goto out;
 	}
@@ -1051,9 +1210,12 @@
 s32 igb_set_d3_lplu_state(struct e1000_hw *hw, bool active)
 {
 	struct e1000_phy_info *phy = &hw->phy;
-	s32 ret_val;
+	s32 ret_val = 0;
 	u16 data;
 
+	if (!(hw->phy.ops.read_reg))
+		goto out;
+
 	ret_val = phy->ops.read_reg(hw, IGP02E1000_PHY_POWER_MGMT, &data);
 	if (ret_val)
 		goto out;
@@ -1288,8 +1450,14 @@
 		 * it across the board.
 		 */
 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
-		if (ret_val)
-			break;
+		if (ret_val) {
+			/*
+			 * If the first read fails, another entity may have
+			 * ownership of the resources, wait and try again to
+			 * see if they have relinquished the resources yet.
+			 */
+			udelay(usec_interval);
+		}
 		ret_val = hw->phy.ops.read_reg(hw, PHY_STATUS, &phy_status);
 		if (ret_val)
 			break;
@@ -1333,8 +1501,13 @@
 
 	index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >>
 		M88E1000_PSSR_CABLE_LENGTH_SHIFT;
+	if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) {
+		ret_val = -E1000_ERR_PHY;
+		goto out;
+	}
+
 	phy->min_cable_length = e1000_m88_cable_length_table[index];
-	phy->max_cable_length = e1000_m88_cable_length_table[index+1];
+	phy->max_cable_length = e1000_m88_cable_length_table[index + 1];
 
 	phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2;
 
diff --git a/drivers/net/igb/e1000_phy.h b/drivers/net/igb/e1000_phy.h
index ebe4b61..adb9436 100644
--- a/drivers/net/igb/e1000_phy.h
+++ b/drivers/net/igb/e1000_phy.h
@@ -43,7 +43,6 @@
 
 s32  igb_check_downshift(struct e1000_hw *hw);
 s32  igb_check_reset_block(struct e1000_hw *hw);
-s32  igb_copper_link_autoneg(struct e1000_hw *hw);
 s32  igb_copper_link_setup_igp(struct e1000_hw *hw);
 s32  igb_copper_link_setup_m88(struct e1000_hw *hw);
 s32  igb_phy_force_speed_duplex_igp(struct e1000_hw *hw);
@@ -57,10 +56,13 @@
 s32  igb_phy_hw_reset(struct e1000_hw *hw);
 s32  igb_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data);
 s32  igb_set_d3_lplu_state(struct e1000_hw *hw, bool active);
+s32  igb_setup_copper_link(struct e1000_hw *hw);
 s32  igb_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data);
 s32  igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
 				u32 usec_interval, bool *success);
 s32  igb_phy_init_script_igp3(struct e1000_hw *hw);
+s32  igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
+s32  igb_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data);
 
 /* IGP01E1000 Specific Registers */
 #define IGP01E1000_PHY_PORT_CONFIG        0x10 /* Port Config */
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 345d144..934e03b 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -76,59 +76,18 @@
 #define E1000_FCRTV    0x02460  /* Flow Control Refresh Timer Value - RW */
 
 /* IEEE 1588 TIMESYNCH */
-#define E1000_TSYNCTXCTL 0x0B614
-#define E1000_TSYNCTXCTL_VALID (1<<0)
-#define E1000_TSYNCTXCTL_ENABLED (1<<4)
-#define E1000_TSYNCRXCTL 0x0B620
-#define E1000_TSYNCRXCTL_VALID (1<<0)
-#define E1000_TSYNCRXCTL_ENABLED (1<<4)
-enum {
-	E1000_TSYNCRXCTL_TYPE_L2_V2 = 0,
-	E1000_TSYNCRXCTL_TYPE_L4_V1 = (1<<1),
-	E1000_TSYNCRXCTL_TYPE_L2_L4_V2 = (1<<2),
-	E1000_TSYNCRXCTL_TYPE_ALL = (1<<3),
-	E1000_TSYNCRXCTL_TYPE_EVENT_V2 = (1<<3) | (1<<1),
-};
-#define E1000_TSYNCRXCFG 0x05F50
-enum {
-	E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE = 0<<0,
-	E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE = 1<<0,
-	E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE = 2<<0,
-	E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE = 3<<0,
-	E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE = 4<<0,
-
-	E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE = 0<<8,
-	E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE = 1<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE = 2<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE = 3<<8,
-	E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE = 8<<8,
-	E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE = 9<<8,
-	E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE = 0xA<<8,
-	E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE = 0xB<<8,
-	E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE = 0xC<<8,
-	E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE = 0xD<<8,
-};
-#define E1000_SYSTIML 0x0B600
-#define E1000_SYSTIMH 0x0B604
-#define E1000_TIMINCA 0x0B608
-
-#define E1000_RXMTRL     0x0B634
-#define E1000_RXSTMPL 0x0B624
-#define E1000_RXSTMPH 0x0B628
-#define E1000_RXSATRL 0x0B62C
-#define E1000_RXSATRH 0x0B630
-
-#define E1000_TXSTMPL 0x0B618
-#define E1000_TXSTMPH 0x0B61C
-
-#define E1000_ETQF0   0x05CB0
-#define E1000_ETQF1   0x05CB4
-#define E1000_ETQF2   0x05CB8
-#define E1000_ETQF3   0x05CBC
-#define E1000_ETQF4   0x05CC0
-#define E1000_ETQF5   0x05CC4
-#define E1000_ETQF6   0x05CC8
-#define E1000_ETQF7   0x05CCC
+#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */
+#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */
+#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */
+#define E1000_RXSTMPL    0x0B624 /* Rx timestamp Low - RO */
+#define E1000_RXSTMPH    0x0B628 /* Rx timestamp High - RO */
+#define E1000_RXSATRL    0x0B62C /* Rx timestamp attribute low - RO */
+#define E1000_RXSATRH    0x0B630 /* Rx timestamp attribute high - RO */
+#define E1000_TXSTMPL    0x0B618 /* Tx timestamp value Low - RO */
+#define E1000_TXSTMPH    0x0B61C /* Tx timestamp value High - RO */
+#define E1000_SYSTIML    0x0B600 /* System time register Low - RO */
+#define E1000_SYSTIMH    0x0B604 /* System time register High - RO */
+#define E1000_TIMINCA    0x0B608 /* Increment attributes register - RW */
 
 /* Filtering Registers */
 #define E1000_SAQF(_n) (0x5980 + 4 * (_n))
@@ -143,7 +102,9 @@
 #define E1000_ETQF(_n)  (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */
 
 #define E1000_RQDPC(_n) (0x0C030 + ((_n) * 0x40))
+
 /* Split and Replication RX Control - RW */
+#define E1000_RXPBS    0x02404  /* Rx Packet Buffer Size - RW */
 /*
  * Convenience macros
  *
@@ -288,10 +249,17 @@
 #define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
 #define E1000_RA       0x05400  /* Receive Address - RW Array */
 #define E1000_RA2      0x054E0  /* 2nd half of receive address array - RW Array */
+#define E1000_PSRTYPE(_i)       (0x05480 + ((_i) * 4))
 #define E1000_RAL(_i)  (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
                                        (0x054E0 + ((_i - 16) * 8)))
 #define E1000_RAH(_i)  (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
                                        (0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i)     (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i)     (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i)      (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i)      (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i)      (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i)      (0x05F00 + ((_i) * 8))
 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
 #define E1000_VT_CTL   0x0581C  /* VMDq Control - RW */
 #define E1000_WUC      0x05800  /* Wakeup Control - RW */
@@ -331,6 +299,7 @@
 #define E1000_QDE       0x02408 /* Queue Drop Enable - RW */
 #define E1000_DTXSWC    0x03500 /* DMA Tx Switch Control - RW */
 #define E1000_RPLOLR    0x05AF0 /* Replication Offload - RW */
+#define E1000_UTA       0x0A000 /* Unicast Table Array - RW */
 #define E1000_IOVTCL    0x05BBC /* IOV Control Register */
 /* These act per VF so an array friendly macro is used */
 #define E1000_P2VMAILBOX(_n)   (0x00C00 + (4 * (_n)))
diff --git a/drivers/net/igb/igb.h b/drivers/net/igb/igb.h
index 7126fea..3298f5a 100644
--- a/drivers/net/igb/igb.h
+++ b/drivers/net/igb/igb.h
@@ -55,6 +55,8 @@
 #define IGB_DEFAULT_ITR                    3 /* dynamic */
 #define IGB_MAX_ITR_USECS              10000
 #define IGB_MIN_ITR_USECS                 10
+#define NON_Q_VECTORS                      1
+#define MAX_Q_VECTORS                      8
 
 /* Transmit and receive queues */
 #define IGB_MAX_RX_QUEUES     (adapter->vfs_allocated_count ? \
@@ -71,9 +73,14 @@
 	u16 vf_mc_hashes[IGB_MAX_VF_MC_ENTRIES];
 	u16 num_vf_mc_hashes;
 	u16 vlans_enabled;
-	bool clear_to_send;
+	u32 flags;
+	unsigned long last_nack;
 };
 
+#define IGB_VF_FLAG_CTS            0x00000001 /* VF is clear to send data */
+#define IGB_VF_FLAG_UNI_PROMISC    0x00000002 /* VF has unicast promisc */
+#define IGB_VF_FLAG_MULTI_PROMISC  0x00000004 /* VF has multicast promisc */
+
 /* RX descriptor control thresholds.
  * PTHRESH - MAC will consider prefetch if it has fewer than this number of
  *           descriptors available in its onboard memory.
@@ -85,17 +92,19 @@
  *           descriptors until either it has this many to write back, or the
  *           ITR timer expires.
  */
-#define IGB_RX_PTHRESH                    16
+#define IGB_RX_PTHRESH                    (hw->mac.type <= e1000_82576 ? 16 : 8)
 #define IGB_RX_HTHRESH                     8
 #define IGB_RX_WTHRESH                     1
+#define IGB_TX_PTHRESH                     8
+#define IGB_TX_HTHRESH                     1
+#define IGB_TX_WTHRESH                     ((hw->mac.type == e1000_82576 && \
+                                             adapter->msix_entries) ? 0 : 16)
 
 /* this is the size past which hardware will drop packets when setting LPE=0 */
 #define MAXIMUM_ETHERNET_VLAN_SIZE 1522
 
 /* Supported Rx Buffer Sizes */
 #define IGB_RXBUFFER_128   128    /* Used for packet split */
-#define IGB_RXBUFFER_256   256    /* Used for packet split */
-#define IGB_RXBUFFER_512   512
 #define IGB_RXBUFFER_1024  1024
 #define IGB_RXBUFFER_2048  2048
 #define IGB_RXBUFFER_16384 16384
@@ -141,36 +150,55 @@
 struct igb_tx_queue_stats {
 	u64 packets;
 	u64 bytes;
+	u64 restart_queue;
 };
 
 struct igb_rx_queue_stats {
 	u64 packets;
 	u64 bytes;
 	u64 drops;
+	u64 csum_err;
+	u64 alloc_failed;
+};
+
+struct igb_q_vector {
+	struct igb_adapter *adapter; /* backlink */
+	struct igb_ring *rx_ring;
+	struct igb_ring *tx_ring;
+	struct napi_struct napi;
+
+	u32 eims_value;
+	u16 cpu;
+
+	u16 itr_val;
+	u8 set_itr;
+	u8 itr_shift;
+	void __iomem *itr_register;
+
+	char name[IFNAMSIZ + 9];
 };
 
 struct igb_ring {
-	struct igb_adapter *adapter; /* backlink */
-	void *desc;                  /* descriptor ring memory */
-	dma_addr_t dma;              /* phys address of the ring */
-	unsigned int size;           /* length of desc. ring in bytes */
-	unsigned int count;          /* number of desc. in the ring */
+	struct igb_q_vector *q_vector; /* backlink to q_vector */
+	struct net_device *netdev;     /* back pointer to net_device */
+	struct pci_dev *pdev;          /* pci device for dma mapping */
+	dma_addr_t dma;                /* phys address of the ring */
+	void *desc;                    /* descriptor ring memory */
+	unsigned int size;             /* length of desc. ring in bytes */
+	u16 count;                     /* number of desc. in the ring */
 	u16 next_to_use;
 	u16 next_to_clean;
-	u16 head;
-	u16 tail;
+	u8 queue_index;
+	u8 reg_idx;
+	void __iomem *head;
+	void __iomem *tail;
 	struct igb_buffer *buffer_info; /* array of buffer info structs */
 
-	u32 eims_value;
-	u32 itr_val;
-	u16 itr_register;
-	u16 cpu;
-
-	u16 queue_index;
-	u16 reg_idx;
 	unsigned int total_bytes;
 	unsigned int total_packets;
 
+	u32 flags;
+
 	union {
 		/* TX */
 		struct {
@@ -180,16 +208,18 @@
 		/* RX */
 		struct {
 			struct igb_rx_queue_stats rx_stats;
-			u64 rx_queue_drops;
-			struct napi_struct napi;
-			int set_itr;
-			struct igb_ring *buddy;
+			u32 rx_buffer_len;
 		};
 	};
-
-	char name[IFNAMSIZ + 5];
 };
 
+#define IGB_RING_FLAG_RX_CSUM        0x00000001 /* RX CSUM enabled */
+#define IGB_RING_FLAG_RX_SCTP_CSUM   0x00000002 /* SCTP CSUM offload enabled */
+
+#define IGB_RING_FLAG_TX_CTX_IDX     0x00000001 /* HW requires context index */
+
+#define IGB_ADVTXD_DCMD (E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS)
+
 #define E1000_RX_DESC_ADV(R, i)	    \
 	(&(((union e1000_adv_rx_desc *)((R).desc))[i]))
 #define E1000_TX_DESC_ADV(R, i)	    \
@@ -197,6 +227,15 @@
 #define E1000_TX_CTXTDESC_ADV(R, i)	    \
 	(&(((struct e1000_adv_tx_context_desc *)((R).desc))[i]))
 
+/* igb_desc_unused - calculate if we have unused descriptors */
+static inline int igb_desc_unused(struct igb_ring *ring)
+{
+	if (ring->next_to_clean > ring->next_to_use)
+		return ring->next_to_clean - ring->next_to_use - 1;
+
+	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
+}
+
 /* board specific private data structure */
 
 struct igb_adapter {
@@ -205,18 +244,18 @@
 	struct vlan_group *vlgrp;
 	u16 mng_vlan_id;
 	u32 bd_number;
-	u32 rx_buffer_len;
 	u32 wol;
 	u32 en_mng_pt;
 	u16 link_speed;
 	u16 link_duplex;
+
 	unsigned int total_tx_bytes;
 	unsigned int total_tx_packets;
 	unsigned int total_rx_bytes;
 	unsigned int total_rx_packets;
 	/* Interrupt Throttle Rate */
-	u32 itr;
-	u32 itr_setting;
+	u32 rx_itr_setting;
+	u32 tx_itr_setting;
 	u16 tx_itr;
 	u16 rx_itr;
 
@@ -229,13 +268,7 @@
 
 	/* TX */
 	struct igb_ring *tx_ring;      /* One per active queue */
-	unsigned int restart_queue;
 	unsigned long tx_queue_len;
-	u32 txd_cmd;
-	u32 gotc;
-	u64 gotc_old;
-	u64 tpt_old;
-	u64 colc_old;
 	u32 tx_timeout_count;
 
 	/* RX */
@@ -243,20 +276,12 @@
 	int num_tx_queues;
 	int num_rx_queues;
 
-	u64 hw_csum_err;
-	u64 hw_csum_good;
-	u32 alloc_rx_buff_failed;
-	u32 gorc;
-	u64 gorc_old;
-	u16 rx_ps_hdr_size;
 	u32 max_frame_size;
 	u32 min_frame_size;
 
 	/* OS defined structs */
 	struct net_device *netdev;
-	struct napi_struct napi;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 	struct cyclecounter cycles;
 	struct timecounter clock;
 	struct timecompare compare;
@@ -273,6 +298,9 @@
 	struct igb_ring test_rx_ring;
 
 	int msg_enable;
+
+	unsigned int num_q_vectors;
+	struct igb_q_vector *q_vector[MAX_Q_VECTORS];
 	struct msix_entry *msix_entries;
 	u32 eims_enable_mask;
 	u32 eims_other;
@@ -283,8 +311,8 @@
 	u32 eeprom_wol;
 
 	struct igb_ring *multi_tx_table[IGB_ABS_MAX_TX_QUEUES];
-	unsigned int tx_ring_count;
-	unsigned int rx_ring_count;
+	u16 tx_ring_count;
+	u16 rx_ring_count;
 	unsigned int vfs_allocated_count;
 	struct vf_data_storage *vf_data;
 };
@@ -292,9 +320,9 @@
 #define IGB_FLAG_HAS_MSI           (1 << 0)
 #define IGB_FLAG_DCA_ENABLED       (1 << 1)
 #define IGB_FLAG_QUAD_PORT_A       (1 << 2)
-#define IGB_FLAG_NEED_CTX_IDX      (1 << 3)
-#define IGB_FLAG_RX_CSUM_DISABLED  (1 << 4)
+#define IGB_FLAG_QUEUE_PAIRS       (1 << 3)
 
+#define IGB_82576_TSYNC_SHIFT 19
 enum e1000_state_t {
 	__IGB_TESTING,
 	__IGB_RESETTING,
@@ -314,10 +342,18 @@
 extern void igb_reinit_locked(struct igb_adapter *);
 extern void igb_reset(struct igb_adapter *);
 extern int igb_set_spd_dplx(struct igb_adapter *, u16);
-extern int igb_setup_tx_resources(struct igb_adapter *, struct igb_ring *);
-extern int igb_setup_rx_resources(struct igb_adapter *, struct igb_ring *);
+extern int igb_setup_tx_resources(struct igb_ring *);
+extern int igb_setup_rx_resources(struct igb_ring *);
 extern void igb_free_tx_resources(struct igb_ring *);
 extern void igb_free_rx_resources(struct igb_ring *);
+extern void igb_configure_tx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_configure_rx_ring(struct igb_adapter *, struct igb_ring *);
+extern void igb_setup_tctl(struct igb_adapter *);
+extern void igb_setup_rctl(struct igb_adapter *);
+extern netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *, struct igb_ring *);
+extern void igb_unmap_and_free_tx_resource(struct igb_ring *,
+					   struct igb_buffer *);
+extern void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
 extern void igb_update_stats(struct igb_adapter *);
 extern void igb_set_ethtool_ops(struct net_device *);
 
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index aab3d97..90b89a8 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -37,14 +37,22 @@
 
 #include "igb.h"
 
+enum {NETDEV_STATS, IGB_STATS};
+
 struct igb_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define IGB_STAT(m) FIELD_SIZEOF(struct igb_adapter, m), \
-		      offsetof(struct igb_adapter, m)
+#define IGB_STAT(m)		IGB_STATS, \
+				FIELD_SIZEOF(struct igb_adapter, m), \
+				offsetof(struct igb_adapter, m)
+#define IGB_NETDEV_STAT(m)	NETDEV_STATS, \
+				FIELD_SIZEOF(struct net_device, m), \
+				offsetof(struct net_device, m)
+
 static const struct igb_stats igb_gstrings_stats[] = {
 	{ "rx_packets", IGB_STAT(stats.gprc) },
 	{ "tx_packets", IGB_STAT(stats.gptc) },
@@ -54,29 +62,28 @@
 	{ "tx_broadcast", IGB_STAT(stats.bptc) },
 	{ "rx_multicast", IGB_STAT(stats.mprc) },
 	{ "tx_multicast", IGB_STAT(stats.mptc) },
-	{ "rx_errors", IGB_STAT(net_stats.rx_errors) },
-	{ "tx_errors", IGB_STAT(net_stats.tx_errors) },
-	{ "tx_dropped", IGB_STAT(net_stats.tx_dropped) },
+	{ "rx_errors", IGB_NETDEV_STAT(stats.rx_errors) },
+	{ "tx_errors", IGB_NETDEV_STAT(stats.tx_errors) },
+	{ "tx_dropped", IGB_NETDEV_STAT(stats.tx_dropped) },
 	{ "multicast", IGB_STAT(stats.mprc) },
 	{ "collisions", IGB_STAT(stats.colc) },
-	{ "rx_length_errors", IGB_STAT(net_stats.rx_length_errors) },
-	{ "rx_over_errors", IGB_STAT(net_stats.rx_over_errors) },
+	{ "rx_length_errors", IGB_NETDEV_STAT(stats.rx_length_errors) },
+	{ "rx_over_errors", IGB_NETDEV_STAT(stats.rx_over_errors) },
 	{ "rx_crc_errors", IGB_STAT(stats.crcerrs) },
-	{ "rx_frame_errors", IGB_STAT(net_stats.rx_frame_errors) },
+	{ "rx_frame_errors", IGB_NETDEV_STAT(stats.rx_frame_errors) },
 	{ "rx_no_buffer_count", IGB_STAT(stats.rnbc) },
-	{ "rx_queue_drop_packet_count", IGB_STAT(net_stats.rx_fifo_errors) },
+	{ "rx_queue_drop_packet_count", IGB_NETDEV_STAT(stats.rx_fifo_errors) },
 	{ "rx_missed_errors", IGB_STAT(stats.mpc) },
 	{ "tx_aborted_errors", IGB_STAT(stats.ecol) },
 	{ "tx_carrier_errors", IGB_STAT(stats.tncrs) },
-	{ "tx_fifo_errors", IGB_STAT(net_stats.tx_fifo_errors) },
-	{ "tx_heartbeat_errors", IGB_STAT(net_stats.tx_heartbeat_errors) },
+	{ "tx_fifo_errors", IGB_NETDEV_STAT(stats.tx_fifo_errors) },
+	{ "tx_heartbeat_errors", IGB_NETDEV_STAT(stats.tx_heartbeat_errors) },
 	{ "tx_window_errors", IGB_STAT(stats.latecol) },
 	{ "tx_abort_late_coll", IGB_STAT(stats.latecol) },
 	{ "tx_deferred_ok", IGB_STAT(stats.dc) },
 	{ "tx_single_coll_ok", IGB_STAT(stats.scc) },
 	{ "tx_multi_coll_ok", IGB_STAT(stats.mcc) },
 	{ "tx_timeout_count", IGB_STAT(tx_timeout_count) },
-	{ "tx_restart_queue", IGB_STAT(restart_queue) },
 	{ "rx_long_length_errors", IGB_STAT(stats.roc) },
 	{ "rx_short_length_errors", IGB_STAT(stats.ruc) },
 	{ "rx_align_errors", IGB_STAT(stats.algnerrc) },
@@ -87,34 +94,32 @@
 	{ "tx_flow_control_xon", IGB_STAT(stats.xontxc) },
 	{ "tx_flow_control_xoff", IGB_STAT(stats.xofftxc) },
 	{ "rx_long_byte_count", IGB_STAT(stats.gorc) },
-	{ "rx_csum_offload_good", IGB_STAT(hw_csum_good) },
-	{ "rx_csum_offload_errors", IGB_STAT(hw_csum_err) },
 	{ "tx_dma_out_of_sync", IGB_STAT(stats.doosync) },
-	{ "alloc_rx_buff_failed", IGB_STAT(alloc_rx_buff_failed) },
 	{ "tx_smbus", IGB_STAT(stats.mgptc) },
 	{ "rx_smbus", IGB_STAT(stats.mgprc) },
 	{ "dropped_smbus", IGB_STAT(stats.mgpdc) },
 };
 
 #define IGB_QUEUE_STATS_LEN \
-	(((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues)* \
+	((((struct igb_adapter *)netdev_priv(netdev))->num_rx_queues * \
 	  (sizeof(struct igb_rx_queue_stats) / sizeof(u64))) + \
-	 ((((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues) * \
+	 (((struct igb_adapter *)netdev_priv(netdev))->num_tx_queues * \
 	  (sizeof(struct igb_tx_queue_stats) / sizeof(u64))))
 #define IGB_GLOBAL_STATS_LEN	\
-	sizeof(igb_gstrings_stats) / sizeof(struct igb_stats)
+	(sizeof(igb_gstrings_stats) / sizeof(struct igb_stats))
 #define IGB_STATS_LEN (IGB_GLOBAL_STATS_LEN + IGB_QUEUE_STATS_LEN)
 static const char igb_gstrings_test[][ETH_GSTRING_LEN] = {
 	"Register test  (offline)", "Eeprom test    (offline)",
 	"Interrupt test (offline)", "Loopback test  (offline)",
 	"Link test   (on/offline)"
 };
-#define IGB_TEST_LEN sizeof(igb_gstrings_test) / ETH_GSTRING_LEN
+#define IGB_TEST_LEN (sizeof(igb_gstrings_test) / ETH_GSTRING_LEN)
 
 static int igb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	u32 status;
 
 	if (hw->phy.media_type == e1000_media_type_copper) {
 
@@ -149,17 +154,20 @@
 
 	ecmd->transceiver = XCVR_INTERNAL;
 
-	if (rd32(E1000_STATUS) & E1000_STATUS_LU) {
+	status = rd32(E1000_STATUS);
 
-		adapter->hw.mac.ops.get_speed_and_duplex(hw,
-					&adapter->link_speed,
-					&adapter->link_duplex);
-		ecmd->speed = adapter->link_speed;
+	if (status & E1000_STATUS_LU) {
 
-		/* unfortunately FULL_DUPLEX != DUPLEX_FULL
-		 *          and HALF_DUPLEX != DUPLEX_HALF */
+		if ((status & E1000_STATUS_SPEED_1000) ||
+		    hw->phy.media_type != e1000_media_type_copper)
+			ecmd->speed = SPEED_1000;
+		else if (status & E1000_STATUS_SPEED_100)
+			ecmd->speed = SPEED_100;
+		else
+			ecmd->speed = SPEED_10;
 
-		if (adapter->link_duplex == FULL_DUPLEX)
+		if ((status & E1000_STATUS_FD) ||
+		    hw->phy.media_type != e1000_media_type_copper)
 			ecmd->duplex = DUPLEX_FULL;
 		else
 			ecmd->duplex = DUPLEX_HALF;
@@ -250,8 +258,9 @@
 		if (netif_running(adapter->netdev)) {
 			igb_down(adapter);
 			igb_up(adapter);
-		} else
+		} else {
 			igb_reset(adapter);
+		}
 	} else {
 		if (pause->rx_pause && pause->tx_pause)
 			hw->fc.requested_mode = e1000_fc_full;
@@ -275,17 +284,20 @@
 static u32 igb_get_rx_csum(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	return !(adapter->flags & IGB_FLAG_RX_CSUM_DISABLED);
+	return !!(adapter->rx_ring[0].flags & IGB_RING_FLAG_RX_CSUM);
 }
 
 static int igb_set_rx_csum(struct net_device *netdev, u32 data)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	int i;
 
-	if (data)
-		adapter->flags &= ~IGB_FLAG_RX_CSUM_DISABLED;
-	else
-		adapter->flags |= IGB_FLAG_RX_CSUM_DISABLED;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		if (data)
+			adapter->rx_ring[i].flags |= IGB_RING_FLAG_RX_CSUM;
+		else
+			adapter->rx_ring[i].flags &= ~IGB_RING_FLAG_RX_CSUM;
+	}
 
 	return 0;
 }
@@ -301,7 +313,7 @@
 
 	if (data) {
 		netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
-		if (adapter->hw.mac.type == e1000_82576)
+		if (adapter->hw.mac.type >= e1000_82576)
 			netdev->features |= NETIF_F_SCTP_CSUM;
 	} else {
 		netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
@@ -495,19 +507,10 @@
 	regs_buff[119] = adapter->stats.scvpc;
 	regs_buff[120] = adapter->stats.hrmpc;
 
-	/* These should probably be added to e1000_regs.h instead */
-	#define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4))
-	#define E1000_IP4AT_REG(_i)   (0x05840 + ((_i) * 8))
-	#define E1000_IP6AT_REG(_i)   (0x05880 + ((_i) * 4))
-	#define E1000_WUPM_REG(_i)    (0x05A00 + ((_i) * 4))
-	#define E1000_FFMT_REG(_i)    (0x09000 + ((_i) * 8))
-	#define E1000_FFVT_REG(_i)    (0x09800 + ((_i) * 8))
-	#define E1000_FFLT_REG(_i)    (0x05F00 + ((_i) * 8))
-
 	for (i = 0; i < 4; i++)
 		regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
 	for (i = 0; i < 4; i++)
-		regs_buff[125 + i] = rd32(E1000_PSRTYPE_REG(i));
+		regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
 	for (i = 0; i < 4; i++)
 		regs_buff[129 + i] = rd32(E1000_RDBAL(i));
 	for (i = 0; i < 4; i++)
@@ -737,12 +740,12 @@
 	if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending))
 		return -EINVAL;
 
-	new_rx_count = max(ring->rx_pending, (u32)IGB_MIN_RXD);
-	new_rx_count = min(new_rx_count, (u32)IGB_MAX_RXD);
+	new_rx_count = min(ring->rx_pending, (u32)IGB_MAX_RXD);
+	new_rx_count = max(new_rx_count, (u32)IGB_MIN_RXD);
 	new_rx_count = ALIGN(new_rx_count, REQ_RX_DESCRIPTOR_MULTIPLE);
 
-	new_tx_count = max(ring->tx_pending, (u32)IGB_MIN_TXD);
-	new_tx_count = min(new_tx_count, (u32)IGB_MAX_TXD);
+	new_tx_count = min(ring->tx_pending, (u32)IGB_MAX_TXD);
+	new_tx_count = max(new_tx_count, (u32)IGB_MIN_TXD);
 	new_tx_count = ALIGN(new_tx_count, REQ_TX_DESCRIPTOR_MULTIPLE);
 
 	if ((new_tx_count == adapter->tx_ring_count) &&
@@ -787,7 +790,7 @@
 
 		for (i = 0; i < adapter->num_tx_queues; i++) {
 			temp_ring[i].count = new_tx_count;
-			err = igb_setup_tx_resources(adapter, &temp_ring[i]);
+			err = igb_setup_tx_resources(&temp_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
@@ -812,7 +815,7 @@
 
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			temp_ring[i].count = new_rx_count;
-			err = igb_setup_rx_resources(adapter, &temp_ring[i]);
+			err = igb_setup_rx_resources(&temp_ring[i]);
 			if (err) {
 				while (i) {
 					i--;
@@ -943,7 +946,7 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 pat, val;
-	u32 _test[] =
+	static const u32 _test[] =
 		{0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF};
 	for (pat = 0; pat < ARRAY_SIZE(_test); pat++) {
 		wr32(reg, (_test[pat] & write));
@@ -956,6 +959,7 @@
 			return 1;
 		}
 	}
+
 	return 0;
 }
 
@@ -973,6 +977,7 @@
 		*data = reg;
 		return 1;
 	}
+
 	return 0;
 }
 
@@ -995,14 +1000,14 @@
 	u32 value, before, after;
 	u32 i, toggle;
 
-	toggle = 0x7FFFF3FF;
-
 	switch (adapter->hw.mac.type) {
 	case e1000_82576:
 		test = reg_test_82576;
+		toggle = 0x7FFFF3FF;
 		break;
 	default:
 		test = reg_test_82575;
+		toggle = 0x7FFFF3FF;
 		break;
 	}
 
@@ -1080,8 +1085,7 @@
 	*data = 0;
 	/* Read and add up the contents of the EEPROM */
 	for (i = 0; i < (NVM_CHECKSUM_REG + 1); i++) {
-		if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp))
-		    < 0) {
+		if ((adapter->hw.nvm.ops.read(&adapter->hw, i, 1, &temp)) < 0) {
 			*data = 1;
 			break;
 		}
@@ -1097,8 +1101,7 @@
 
 static irqreturn_t igb_test_intr(int irq, void *data)
 {
-	struct net_device *netdev = (struct net_device *) data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = (struct igb_adapter *) data;
 	struct e1000_hw *hw = &adapter->hw;
 
 	adapter->test_icr |= rd32(E1000_ICR);
@@ -1116,32 +1119,36 @@
 	*data = 0;
 
 	/* Hook up test interrupt handler just for this test */
-	if (adapter->msix_entries)
-		/* NOTE: we don't test MSI-X interrupts here, yet */
-		return 0;
-
-	if (adapter->flags & IGB_FLAG_HAS_MSI) {
+	if (adapter->msix_entries) {
+		if (request_irq(adapter->msix_entries[0].vector,
+		                &igb_test_intr, 0, netdev->name, adapter)) {
+			*data = 1;
+			return -1;
+		}
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
 		shared_int = false;
-		if (request_irq(irq, &igb_test_intr, 0, netdev->name, netdev)) {
+		if (request_irq(irq,
+		                &igb_test_intr, 0, netdev->name, adapter)) {
 			*data = 1;
 			return -1;
 		}
 	} else if (!request_irq(irq, &igb_test_intr, IRQF_PROBE_SHARED,
-				netdev->name, netdev)) {
+				netdev->name, adapter)) {
 		shared_int = false;
 	} else if (request_irq(irq, &igb_test_intr, IRQF_SHARED,
-		 netdev->name, netdev)) {
+		 netdev->name, adapter)) {
 		*data = 1;
 		return -1;
 	}
 	dev_info(&adapter->pdev->dev, "testing %s interrupt\n",
 		(shared_int ? "shared" : "unshared"));
+
 	/* Disable all the interrupts */
-	wr32(E1000_IMC, 0xFFFFFFFF);
+	wr32(E1000_IMC, ~0);
 	msleep(10);
 
 	/* Define all writable bits for ICS */
-	switch(hw->mac.type) {
+	switch (hw->mac.type) {
 	case e1000_82575:
 		ics_mask = 0x37F47EDD;
 		break;
@@ -1231,190 +1238,61 @@
 	msleep(10);
 
 	/* Unhook test interrupt handler */
-	free_irq(irq, netdev);
+	if (adapter->msix_entries)
+		free_irq(adapter->msix_entries[0].vector, adapter);
+	else
+		free_irq(irq, adapter);
 
 	return *data;
 }
 
 static void igb_free_desc_rings(struct igb_adapter *adapter)
 {
-	struct igb_ring *tx_ring = &adapter->test_tx_ring;
-	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	int i;
-
-	if (tx_ring->desc && tx_ring->buffer_info) {
-		for (i = 0; i < tx_ring->count; i++) {
-			struct igb_buffer *buf = &(tx_ring->buffer_info[i]);
-			if (buf->dma)
-				pci_unmap_single(pdev, buf->dma, buf->length,
-						 PCI_DMA_TODEVICE);
-			if (buf->skb)
-				dev_kfree_skb(buf->skb);
-		}
-	}
-
-	if (rx_ring->desc && rx_ring->buffer_info) {
-		for (i = 0; i < rx_ring->count; i++) {
-			struct igb_buffer *buf = &(rx_ring->buffer_info[i]);
-			if (buf->dma)
-				pci_unmap_single(pdev, buf->dma,
-						 IGB_RXBUFFER_2048,
-						 PCI_DMA_FROMDEVICE);
-			if (buf->skb)
-				dev_kfree_skb(buf->skb);
-		}
-	}
-
-	if (tx_ring->desc) {
-		pci_free_consistent(pdev, tx_ring->size, tx_ring->desc,
-				    tx_ring->dma);
-		tx_ring->desc = NULL;
-	}
-	if (rx_ring->desc) {
-		pci_free_consistent(pdev, rx_ring->size, rx_ring->desc,
-				    rx_ring->dma);
-		rx_ring->desc = NULL;
-	}
-
-	kfree(tx_ring->buffer_info);
-	tx_ring->buffer_info = NULL;
-	kfree(rx_ring->buffer_info);
-	rx_ring->buffer_info = NULL;
-
-	return;
+	igb_free_tx_resources(&adapter->test_tx_ring);
+	igb_free_rx_resources(&adapter->test_rx_ring);
 }
 
 static int igb_setup_desc_rings(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct igb_ring *tx_ring = &adapter->test_tx_ring;
 	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	struct igb_buffer *buffer_info;
-	u32 rctl;
-	int i, ret_val;
+	struct e1000_hw *hw = &adapter->hw;
+	int ret_val;
 
 	/* Setup Tx descriptor ring and Tx buffers */
+	tx_ring->count = IGB_DEFAULT_TXD;
+	tx_ring->pdev = adapter->pdev;
+	tx_ring->netdev = adapter->netdev;
+	tx_ring->reg_idx = adapter->vfs_allocated_count;
 
-	if (!tx_ring->count)
-		tx_ring->count = IGB_DEFAULT_TXD;
-
-	tx_ring->buffer_info = kcalloc(tx_ring->count,
-				       sizeof(struct igb_buffer),
-				       GFP_KERNEL);
-	if (!tx_ring->buffer_info) {
+	if (igb_setup_tx_resources(tx_ring)) {
 		ret_val = 1;
 		goto err_nomem;
 	}
 
-	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
-	tx_ring->size = ALIGN(tx_ring->size, 4096);
-	tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
-					     &tx_ring->dma);
-	if (!tx_ring->desc) {
-		ret_val = 2;
-		goto err_nomem;
-	}
-	tx_ring->next_to_use = tx_ring->next_to_clean = 0;
-
-	wr32(E1000_TDBAL(0),
-			((u64) tx_ring->dma & 0x00000000FFFFFFFF));
-	wr32(E1000_TDBAH(0), ((u64) tx_ring->dma >> 32));
-	wr32(E1000_TDLEN(0),
-			tx_ring->count * sizeof(union e1000_adv_tx_desc));
-	wr32(E1000_TDH(0), 0);
-	wr32(E1000_TDT(0), 0);
-	wr32(E1000_TCTL,
-			E1000_TCTL_PSP | E1000_TCTL_EN |
-			E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT |
-			E1000_COLLISION_DISTANCE << E1000_COLD_SHIFT);
-
-	for (i = 0; i < tx_ring->count; i++) {
-		union e1000_adv_tx_desc *tx_desc;
-		struct sk_buff *skb;
-		unsigned int size = 1024;
-
-		tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
-		skb = alloc_skb(size, GFP_KERNEL);
-		if (!skb) {
-			ret_val = 3;
-			goto err_nomem;
-		}
-		skb_put(skb, size);
-		buffer_info = &tx_ring->buffer_info[i];
-		buffer_info->skb = skb;
-		buffer_info->length = skb->len;
-		buffer_info->dma = pci_map_single(pdev, skb->data, skb->len,
-		                                  PCI_DMA_TODEVICE);
-		tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
-		tx_desc->read.olinfo_status = cpu_to_le32(skb->len) <<
-		                              E1000_ADVTXD_PAYLEN_SHIFT;
-		tx_desc->read.cmd_type_len = cpu_to_le32(skb->len);
-		tx_desc->read.cmd_type_len |= cpu_to_le32(E1000_TXD_CMD_EOP |
-		                                          E1000_TXD_CMD_IFCS |
-		                                          E1000_TXD_CMD_RS |
-		                                          E1000_ADVTXD_DTYP_DATA |
-		                                          E1000_ADVTXD_DCMD_DEXT);
-	}
+	igb_setup_tctl(adapter);
+	igb_configure_tx_ring(adapter, tx_ring);
 
 	/* Setup Rx descriptor ring and Rx buffers */
+	rx_ring->count = IGB_DEFAULT_RXD;
+	rx_ring->pdev = adapter->pdev;
+	rx_ring->netdev = adapter->netdev;
+	rx_ring->rx_buffer_len = IGB_RXBUFFER_2048;
+	rx_ring->reg_idx = adapter->vfs_allocated_count;
 
-	if (!rx_ring->count)
-		rx_ring->count = IGB_DEFAULT_RXD;
-
-	rx_ring->buffer_info = kcalloc(rx_ring->count,
-				       sizeof(struct igb_buffer),
-				       GFP_KERNEL);
-	if (!rx_ring->buffer_info) {
-		ret_val = 4;
+	if (igb_setup_rx_resources(rx_ring)) {
+		ret_val = 3;
 		goto err_nomem;
 	}
 
-	rx_ring->size = rx_ring->count * sizeof(union e1000_adv_rx_desc);
-	rx_ring->desc = pci_alloc_consistent(pdev, rx_ring->size,
-					     &rx_ring->dma);
-	if (!rx_ring->desc) {
-		ret_val = 5;
-		goto err_nomem;
-	}
-	rx_ring->next_to_use = rx_ring->next_to_clean = 0;
+	/* set the default queue to queue 0 of PF */
+	wr32(E1000_MRQC, adapter->vfs_allocated_count << 3);
 
-	rctl = rd32(E1000_RCTL);
-	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
-	wr32(E1000_RDBAL(0),
-			((u64) rx_ring->dma & 0xFFFFFFFF));
-	wr32(E1000_RDBAH(0),
-			((u64) rx_ring->dma >> 32));
-	wr32(E1000_RDLEN(0), rx_ring->size);
-	wr32(E1000_RDH(0), 0);
-	wr32(E1000_RDT(0), 0);
-	rctl &= ~(E1000_RCTL_LBM_TCVR | E1000_RCTL_LBM_MAC);
-	rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_RDMTS_HALF |
-		(adapter->hw.mac.mc_filter_type << E1000_RCTL_MO_SHIFT);
-	wr32(E1000_RCTL, rctl);
-	wr32(E1000_SRRCTL(0), E1000_SRRCTL_DESCTYPE_ADV_ONEBUF);
+	/* enable receive ring */
+	igb_setup_rctl(adapter);
+	igb_configure_rx_ring(adapter, rx_ring);
 
-	for (i = 0; i < rx_ring->count; i++) {
-		union e1000_adv_rx_desc *rx_desc;
-		struct sk_buff *skb;
-
-		buffer_info = &rx_ring->buffer_info[i];
-		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
-		skb = alloc_skb(IGB_RXBUFFER_2048 + NET_IP_ALIGN,
-				GFP_KERNEL);
-		if (!skb) {
-			ret_val = 6;
-			goto err_nomem;
-		}
-		skb_reserve(skb, NET_IP_ALIGN);
-		buffer_info->skb = skb;
-		buffer_info->dma = pci_map_single(pdev, skb->data,
-		                                  IGB_RXBUFFER_2048,
-		                                  PCI_DMA_FROMDEVICE);
-		rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
-		memset(skb->data, 0x00, skb->len);
-	}
+	igb_alloc_rx_buffers_adv(rx_ring, igb_desc_unused(rx_ring));
 
 	return 0;
 
@@ -1490,7 +1368,10 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 reg;
 
-	if (hw->phy.media_type == e1000_media_type_internal_serdes) {
+	reg = rd32(E1000_CTRL_EXT);
+
+	/* use CTRL_EXT to identify link type as SGMII can appear as copper */
+	if (reg & E1000_CTRL_EXT_LINK_MODE_MASK) {
 		reg = rd32(E1000_RCTL);
 		reg |= E1000_RCTL_LBM_TCVR;
 		wr32(E1000_RCTL, reg);
@@ -1521,11 +1402,9 @@
 		wr32(E1000_PCS_LCTL, reg);
 
 		return 0;
-	} else if (hw->phy.media_type == e1000_media_type_copper) {
-		return igb_set_phy_loopback(adapter);
 	}
 
-	return 7;
+	return igb_set_phy_loopback(adapter);
 }
 
 static void igb_loopback_cleanup(struct igb_adapter *adapter)
@@ -1551,35 +1430,99 @@
 				    unsigned int frame_size)
 {
 	memset(skb->data, 0xFF, frame_size);
-	frame_size &= ~1;
-	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
-	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
-	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+	frame_size /= 2;
+	memset(&skb->data[frame_size], 0xAA, frame_size - 1);
+	memset(&skb->data[frame_size + 10], 0xBE, 1);
+	memset(&skb->data[frame_size + 12], 0xAF, 1);
 }
 
 static int igb_check_lbtest_frame(struct sk_buff *skb, unsigned int frame_size)
 {
-	frame_size &= ~1;
-	if (*(skb->data + 3) == 0xFF)
-		if ((*(skb->data + frame_size / 2 + 10) == 0xBE) &&
-		   (*(skb->data + frame_size / 2 + 12) == 0xAF))
+	frame_size /= 2;
+	if (*(skb->data + 3) == 0xFF) {
+		if ((*(skb->data + frame_size + 10) == 0xBE) &&
+		   (*(skb->data + frame_size + 12) == 0xAF)) {
 			return 0;
+		}
+	}
 	return 13;
 }
 
+static int igb_clean_test_rings(struct igb_ring *rx_ring,
+                                struct igb_ring *tx_ring,
+                                unsigned int size)
+{
+	union e1000_adv_rx_desc *rx_desc;
+	struct igb_buffer *buffer_info;
+	int rx_ntc, tx_ntc, count = 0;
+	u32 staterr;
+
+	/* initialize next to clean and descriptor values */
+	rx_ntc = rx_ring->next_to_clean;
+	tx_ntc = tx_ring->next_to_clean;
+	rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+	staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+
+	while (staterr & E1000_RXD_STAT_DD) {
+		/* check rx buffer */
+		buffer_info = &rx_ring->buffer_info[rx_ntc];
+
+		/* unmap rx buffer, will be remapped by alloc_rx_buffers */
+		pci_unmap_single(rx_ring->pdev,
+		                 buffer_info->dma,
+				 rx_ring->rx_buffer_len,
+				 PCI_DMA_FROMDEVICE);
+		buffer_info->dma = 0;
+
+		/* verify contents of skb */
+		if (!igb_check_lbtest_frame(buffer_info->skb, size))
+			count++;
+
+		/* unmap buffer on tx side */
+		buffer_info = &tx_ring->buffer_info[tx_ntc];
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
+
+		/* increment rx/tx next to clean counters */
+		rx_ntc++;
+		if (rx_ntc == rx_ring->count)
+			rx_ntc = 0;
+		tx_ntc++;
+		if (tx_ntc == tx_ring->count)
+			tx_ntc = 0;
+
+		/* fetch next descriptor */
+		rx_desc = E1000_RX_DESC_ADV(*rx_ring, rx_ntc);
+		staterr = le32_to_cpu(rx_desc->wb.upper.status_error);
+	}
+
+	/* re-map buffers to ring, store next to clean values */
+	igb_alloc_rx_buffers_adv(rx_ring, count);
+	rx_ring->next_to_clean = rx_ntc;
+	tx_ring->next_to_clean = tx_ntc;
+
+	return count;
+}
+
 static int igb_run_loopback_test(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct igb_ring *tx_ring = &adapter->test_tx_ring;
 	struct igb_ring *rx_ring = &adapter->test_rx_ring;
-	struct pci_dev *pdev = adapter->pdev;
-	int i, j, k, l, lc, good_cnt;
-	int ret_val = 0;
-	unsigned long time;
+	int i, j, lc, good_cnt, ret_val = 0;
+	unsigned int size = 1024;
+	netdev_tx_t tx_ret_val;
+	struct sk_buff *skb;
 
-	wr32(E1000_RDT(0), rx_ring->count - 1);
+	/* allocate test skb */
+	skb = alloc_skb(size, GFP_KERNEL);
+	if (!skb)
+		return 11;
 
-	/* Calculate the loop count based on the largest descriptor ring
+	/* place data into test skb */
+	igb_create_lbtest_frame(skb, size);
+	skb_put(skb, size);
+
+	/*
+	 * Calculate the loop count based on the largest descriptor ring
 	 * The idea is to wrap the largest ring a number of times using 64
 	 * send/receive pairs during each loop
 	 */
@@ -1589,50 +1532,36 @@
 	else
 		lc = ((rx_ring->count / 64) * 2) + 1;
 
-	k = l = 0;
 	for (j = 0; j <= lc; j++) { /* loop count loop */
-		for (i = 0; i < 64; i++) { /* send the packets */
-			igb_create_lbtest_frame(tx_ring->buffer_info[k].skb,
-						1024);
-			pci_dma_sync_single_for_device(pdev,
-				tx_ring->buffer_info[k].dma,
-				tx_ring->buffer_info[k].length,
-				PCI_DMA_TODEVICE);
-			k++;
-			if (k == tx_ring->count)
-				k = 0;
-		}
-		wr32(E1000_TDT(0), k);
-		msleep(200);
-		time = jiffies; /* set the start time for the receive */
+		/* reset count of good packets */
 		good_cnt = 0;
-		do { /* receive the sent packets */
-			pci_dma_sync_single_for_cpu(pdev,
-					rx_ring->buffer_info[l].dma,
-					IGB_RXBUFFER_2048,
-					PCI_DMA_FROMDEVICE);
 
-			ret_val = igb_check_lbtest_frame(
-					     rx_ring->buffer_info[l].skb, 1024);
-			if (!ret_val)
+		/* place 64 packets on the transmit queue*/
+		for (i = 0; i < 64; i++) {
+			skb_get(skb);
+			tx_ret_val = igb_xmit_frame_ring_adv(skb, tx_ring);
+			if (tx_ret_val == NETDEV_TX_OK)
 				good_cnt++;
-			l++;
-			if (l == rx_ring->count)
-				l = 0;
-			/* time + 20 msecs (200 msecs on 2.4) is more than
-			 * enough time to complete the receives, if it's
-			 * exceeded, break and error off
-			 */
-		} while (good_cnt < 64 && jiffies < (time + 20));
+		}
+
 		if (good_cnt != 64) {
-			ret_val = 13; /* ret_val is the same as mis-compare */
+			ret_val = 12;
 			break;
 		}
-		if (jiffies >= (time + 20)) {
-			ret_val = 14; /* error code for time out error */
+
+		/* allow 200 milliseconds for packets to go from tx to rx */
+		msleep(200);
+
+		good_cnt = igb_clean_test_rings(rx_ring, tx_ring, size);
+		if (good_cnt != 64) {
+			ret_val = 13;
 			break;
 		}
 	} /* end loop count loop */
+
+	/* free the original skb */
+	kfree_skb(skb);
+
 	return ret_val;
 }
 
@@ -1685,8 +1614,7 @@
 		if (hw->mac.autoneg)
 			msleep(4000);
 
-		if (!(rd32(E1000_STATUS) &
-		      E1000_STATUS_LU))
+		if (!(rd32(E1000_STATUS) & E1000_STATUS_LU))
 			*data = 1;
 	}
 	return *data;
@@ -1868,7 +1796,6 @@
 		adapter->wol |= E1000_WUFC_BC;
 	if (wol->wolopts & WAKE_MAGIC)
 		adapter->wol |= E1000_WUFC_MAG;
-
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	return 0;
@@ -1881,12 +1808,19 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	unsigned long timeout;
 
-	if (!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ))
-		data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ);
+	timeout = data * 1000;
+
+	/*
+	 *  msleep_interruptable only accepts unsigned int so we are limited
+	 * in how long a duration we can wait
+	 */
+	if (!timeout || timeout > UINT_MAX)
+		timeout = UINT_MAX;
 
 	igb_blink_led(hw);
-	msleep_interruptible(data * 1000);
+	msleep_interruptible(timeout);
 
 	igb_led_off(hw);
 	clear_bit(IGB_LED_ON, &adapter->led_status);
@@ -1899,7 +1833,6 @@
 			    struct ethtool_coalesce *ec)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
-	struct e1000_hw *hw = &adapter->hw;
 	int i;
 
 	if ((ec->rx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
@@ -1908,17 +1841,39 @@
 	    (ec->rx_coalesce_usecs == 2))
 		return -EINVAL;
 
-	/* convert to rate of irq's per second */
-	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3) {
-		adapter->itr_setting = ec->rx_coalesce_usecs;
-		adapter->itr = IGB_START_ITR;
-	} else {
-		adapter->itr_setting = ec->rx_coalesce_usecs << 2;
-		adapter->itr = adapter->itr_setting;
-	}
+	if ((ec->tx_coalesce_usecs > IGB_MAX_ITR_USECS) ||
+	    ((ec->tx_coalesce_usecs > 3) &&
+	     (ec->tx_coalesce_usecs < IGB_MIN_ITR_USECS)) ||
+	    (ec->tx_coalesce_usecs == 2))
+		return -EINVAL;
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		wr32(adapter->rx_ring[i].itr_register, adapter->itr);
+	if ((adapter->flags & IGB_FLAG_QUEUE_PAIRS) && ec->tx_coalesce_usecs)
+		return -EINVAL;
+
+	/* convert to rate of irq's per second */
+	if (ec->rx_coalesce_usecs && ec->rx_coalesce_usecs <= 3)
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs;
+	else
+		adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2;
+
+	/* convert to rate of irq's per second */
+	if (adapter->flags & IGB_FLAG_QUEUE_PAIRS)
+		adapter->tx_itr_setting = adapter->rx_itr_setting;
+	else if (ec->tx_coalesce_usecs && ec->tx_coalesce_usecs <= 3)
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs;
+	else
+		adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		if (q_vector->rx_ring)
+			q_vector->itr_val = adapter->rx_itr_setting;
+		else
+			q_vector->itr_val = adapter->tx_itr_setting;
+		if (q_vector->itr_val && q_vector->itr_val <= 3)
+			q_vector->itr_val = IGB_START_ITR;
+		q_vector->set_itr = 1;
+	}
 
 	return 0;
 }
@@ -1928,15 +1883,21 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 
-	if (adapter->itr_setting <= 3)
-		ec->rx_coalesce_usecs = adapter->itr_setting;
+	if (adapter->rx_itr_setting <= 3)
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting;
 	else
-		ec->rx_coalesce_usecs = adapter->itr_setting >> 2;
+		ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2;
+
+	if (!(adapter->flags & IGB_FLAG_QUEUE_PAIRS)) {
+		if (adapter->tx_itr_setting <= 3)
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting;
+		else
+			ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2;
+	}
 
 	return 0;
 }
 
-
 static int igb_nway_reset(struct net_device *netdev)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
@@ -1966,10 +1927,22 @@
 	int stat_count_rx = sizeof(struct igb_rx_queue_stats) / sizeof(u64);
 	int j;
 	int i;
+	char *p = NULL;
 
 	igb_update_stats(adapter);
+
 	for (i = 0; i < IGB_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter+igb_gstrings_stats[i].stat_offset;
+		switch (igb_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					igb_gstrings_stats[i].stat_offset;
+			break;
+		case IGB_STATS:
+			p = (char *) adapter +
+					igb_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (igb_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
@@ -2011,6 +1984,8 @@
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "tx_queue_%u_bytes", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "tx_queue_%u_restart", i);
+			p += ETH_GSTRING_LEN;
 		}
 		for (i = 0; i < adapter->num_rx_queues; i++) {
 			sprintf(p, "rx_queue_%u_packets", i);
@@ -2019,6 +1994,10 @@
 			p += ETH_GSTRING_LEN;
 			sprintf(p, "rx_queue_%u_drops", i);
 			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_csum_err", i);
+			p += ETH_GSTRING_LEN;
+			sprintf(p, "rx_queue_%u_alloc_failed", i);
+			p += ETH_GSTRING_LEN;
 		}
 /*		BUG_ON(p - data != IGB_STATS_LEN * ETH_GSTRING_LEN); */
 		break;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 714c3a4..b044c98 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -63,6 +63,7 @@
 static struct pci_device_id igb_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS), board_82575 },
+	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_NS_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_FIBER), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES), board_82575 },
 	{ PCI_VDEVICE(INTEL, E1000_DEV_ID_82576_SERDES_QUAD), board_82575 },
@@ -81,6 +82,7 @@
 static int igb_setup_all_rx_resources(struct igb_adapter *);
 static void igb_free_all_tx_resources(struct igb_adapter *);
 static void igb_free_all_rx_resources(struct igb_adapter *);
+static void igb_setup_mrqc(struct igb_adapter *);
 void igb_update_stats(struct igb_adapter *);
 static int igb_probe(struct pci_dev *, const struct pci_device_id *);
 static void __devexit igb_remove(struct pci_dev *pdev);
@@ -89,7 +91,6 @@
 static int igb_close(struct net_device *);
 static void igb_configure_tx(struct igb_adapter *);
 static void igb_configure_rx(struct igb_adapter *);
-static void igb_setup_rctl(struct igb_adapter *);
 static void igb_clean_all_tx_rings(struct igb_adapter *);
 static void igb_clean_all_rx_rings(struct igb_adapter *);
 static void igb_clean_tx_ring(struct igb_ring *);
@@ -98,28 +99,22 @@
 static void igb_update_phy_info(unsigned long);
 static void igb_watchdog(unsigned long);
 static void igb_watchdog_task(struct work_struct *);
-static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *,
-					   struct net_device *,
-					   struct igb_ring *);
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
-				      struct net_device *);
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb, struct net_device *);
 static struct net_device_stats *igb_get_stats(struct net_device *);
 static int igb_change_mtu(struct net_device *, int);
 static int igb_set_mac(struct net_device *, void *);
+static void igb_set_uta(struct igb_adapter *adapter);
 static irqreturn_t igb_intr(int irq, void *);
 static irqreturn_t igb_intr_msi(int irq, void *);
 static irqreturn_t igb_msix_other(int irq, void *);
-static irqreturn_t igb_msix_rx(int irq, void *);
-static irqreturn_t igb_msix_tx(int irq, void *);
+static irqreturn_t igb_msix_ring(int irq, void *);
 #ifdef CONFIG_IGB_DCA
-static void igb_update_rx_dca(struct igb_ring *);
-static void igb_update_tx_dca(struct igb_ring *);
+static void igb_update_dca(struct igb_q_vector *);
 static void igb_setup_dca(struct igb_adapter *);
 #endif /* CONFIG_IGB_DCA */
-static bool igb_clean_tx_irq(struct igb_ring *);
+static bool igb_clean_tx_irq(struct igb_q_vector *);
 static int igb_poll(struct napi_struct *, int);
-static bool igb_clean_rx_irq_adv(struct igb_ring *, int *, int);
-static void igb_alloc_rx_buffers_adv(struct igb_ring *, int);
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *, int *, int);
 static int igb_ioctl(struct net_device *, struct ifreq *, int cmd);
 static void igb_tx_timeout(struct net_device *);
 static void igb_reset_task(struct work_struct *);
@@ -127,57 +122,13 @@
 static void igb_vlan_rx_add_vid(struct net_device *, u16);
 static void igb_vlan_rx_kill_vid(struct net_device *, u16);
 static void igb_restore_vlan(struct igb_adapter *);
+static void igb_rar_set_qsel(struct igb_adapter *, u8 *, u32 , u8);
 static void igb_ping_all_vfs(struct igb_adapter *);
 static void igb_msg_task(struct igb_adapter *);
-static int igb_rcv_msg_from_vf(struct igb_adapter *, u32);
-static inline void igb_set_rah_pool(struct e1000_hw *, int , int);
 static void igb_vmm_control(struct igb_adapter *);
-static int igb_set_vf_mac(struct igb_adapter *adapter, int, unsigned char *);
+static int igb_set_vf_mac(struct igb_adapter *, int, unsigned char *);
 static void igb_restore_vf_multicasts(struct igb_adapter *adapter);
 
-static inline void igb_set_vmolr(struct e1000_hw *hw, int vfn)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_VMOLR(vfn));
-	reg_data |= E1000_VMOLR_BAM |	 /* Accept broadcast */
-	            E1000_VMOLR_ROPE |   /* Accept packets matched in UTA */
-	            E1000_VMOLR_ROMPE |  /* Accept packets matched in MTA */
-	            E1000_VMOLR_AUPE |   /* Accept untagged packets */
-	            E1000_VMOLR_STRVLAN; /* Strip vlan tags */
-	wr32(E1000_VMOLR(vfn), reg_data);
-}
-
-static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
-                                 int vfn)
-{
-	struct e1000_hw *hw = &adapter->hw;
-	u32 vmolr;
-
-	/* if it isn't the PF check to see if VFs are enabled and
-	 * increase the size to support vlan tags */
-	if (vfn < adapter->vfs_allocated_count &&
-	    adapter->vf_data[vfn].vlans_enabled)
-		size += VLAN_TAG_SIZE;
-
-	vmolr = rd32(E1000_VMOLR(vfn));
-	vmolr &= ~E1000_VMOLR_RLPML_MASK;
-	vmolr |= size | E1000_VMOLR_LPE;
-	wr32(E1000_VMOLR(vfn), vmolr);
-
-	return 0;
-}
-
-static inline void igb_set_rah_pool(struct e1000_hw *hw, int pool, int entry)
-{
-	u32 reg_data;
-
-	reg_data = rd32(E1000_RAH(entry));
-	reg_data &= ~E1000_RAH_POOL_MASK;
-	reg_data |= E1000_RAH_POOL_1 << pool;;
-	wr32(E1000_RAH(entry), reg_data);
-}
-
 #ifdef CONFIG_PM
 static int igb_suspend(struct pci_dev *, pm_message_t);
 static int igb_resume(struct pci_dev *);
@@ -228,46 +179,12 @@
 	.err_handler = &igb_err_handler
 };
 
-static int global_quad_port_a; /* global quad port a indication */
-
 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 /**
- * Scale the NIC clock cycle by a large factor so that
- * relatively small clock corrections can be added or
- * substracted at each clock tick. The drawbacks of a
- * large factor are a) that the clock register overflows
- * more quickly (not such a big deal) and b) that the
- * increment per tick has to fit into 24 bits.
- *
- * Note that
- *   TIMINCA = IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS *
- *             IGB_TSYNC_SCALE
- *   TIMINCA += TIMINCA * adjustment [ppm] / 1e9
- *
- * The base scale factor is intentionally a power of two
- * so that the division in %struct timecounter can be done with
- * a shift.
- */
-#define IGB_TSYNC_SHIFT (19)
-#define IGB_TSYNC_SCALE (1<<IGB_TSYNC_SHIFT)
-
-/**
- * The duration of one clock cycle of the NIC.
- *
- * @todo This hard-coded value is part of the specification and might change
- * in future hardware revisions. Add revision check.
- */
-#define IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS 16
-
-#if (IGB_TSYNC_SCALE * IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS) >= (1<<24)
-# error IGB_TSYNC_SCALE and/or IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS are too large to fit into TIMINCA
-#endif
-
-/**
  * igb_read_clock - read raw cycle counter (to be used by time counter)
  */
 static cycle_t igb_read_clock(const struct cyclecounter *tc)
@@ -275,11 +192,11 @@
 	struct igb_adapter *adapter =
 		container_of(tc, struct igb_adapter, cycles);
 	struct e1000_hw *hw = &adapter->hw;
-	u64 stamp;
+	u64 stamp = 0;
+	int shift = 0;
 
-	stamp =  rd32(E1000_SYSTIML);
-	stamp |= (u64)rd32(E1000_SYSTIMH) << 32ULL;
-
+	stamp |= (u64)rd32(E1000_SYSTIML) << shift;
+	stamp |= (u64)rd32(E1000_SYSTIMH) << (shift + 32);
 	return stamp;
 }
 
@@ -320,17 +237,6 @@
 #endif
 
 /**
- * igb_desc_unused - calculate if we have unused descriptors
- **/
-static int igb_desc_unused(struct igb_ring *ring)
-{
-	if (ring->next_to_clean > ring->next_to_use)
-		return ring->next_to_clean - ring->next_to_use - 1;
-
-	return ring->count + ring->next_to_clean - ring->next_to_use - 1;
-}
-
-/**
  * igb_init_module - Driver Registration Routine
  *
  * igb_init_module is the first routine called when the driver is
@@ -344,12 +250,9 @@
 
 	printk(KERN_INFO "%s\n", igb_copyright);
 
-	global_quad_port_a = 0;
-
 #ifdef CONFIG_IGB_DCA
 	dca_register_notify(&dca_notifier);
 #endif
-
 	ret = pci_register_driver(&igb_driver);
 	return ret;
 }
@@ -382,8 +285,8 @@
  **/
 static void igb_cache_ring_register(struct igb_adapter *adapter)
 {
-	int i;
-	unsigned int rbase_offset = adapter->vfs_allocated_count;
+	int i = 0, j = 0;
+	u32 rbase_offset = adapter->vfs_allocated_count;
 
 	switch (adapter->hw.mac.type) {
 	case e1000_82576:
@@ -392,23 +295,36 @@
 		 * In order to avoid collision we start at the first free queue
 		 * and continue consuming queues in the same sequence
 		 */
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		break;
+		if (adapter->vfs_allocated_count) {
+			for (; i < adapter->num_rx_queues; i++)
+				adapter->rx_ring[i].reg_idx = rbase_offset +
+				                              Q_IDX_82576(i);
+			for (; j < adapter->num_tx_queues; j++)
+				adapter->tx_ring[j].reg_idx = rbase_offset +
+				                              Q_IDX_82576(j);
+		}
 	case e1000_82575:
 	default:
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = i;
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = i;
+		for (; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].reg_idx = rbase_offset + i;
+		for (; j < adapter->num_tx_queues; j++)
+			adapter->tx_ring[j].reg_idx = rbase_offset + j;
 		break;
 	}
 }
 
+static void igb_free_queues(struct igb_adapter *adapter)
+{
+	kfree(adapter->tx_ring);
+	kfree(adapter->rx_ring);
+
+	adapter->tx_ring = NULL;
+	adapter->rx_ring = NULL;
+
+	adapter->num_rx_queues = 0;
+	adapter->num_tx_queues = 0;
+}
+
 /**
  * igb_alloc_queues - Allocate memory for all rings
  * @adapter: board private structure to initialize
@@ -423,59 +339,61 @@
 	adapter->tx_ring = kcalloc(adapter->num_tx_queues,
 				   sizeof(struct igb_ring), GFP_KERNEL);
 	if (!adapter->tx_ring)
-		return -ENOMEM;
+		goto err;
 
 	adapter->rx_ring = kcalloc(adapter->num_rx_queues,
 				   sizeof(struct igb_ring), GFP_KERNEL);
-	if (!adapter->rx_ring) {
-		kfree(adapter->tx_ring);
-		return -ENOMEM;
-	}
-
-	adapter->rx_ring->buddy = adapter->tx_ring;
+	if (!adapter->rx_ring)
+		goto err;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
 		struct igb_ring *ring = &(adapter->tx_ring[i]);
 		ring->count = adapter->tx_ring_count;
-		ring->adapter = adapter;
 		ring->queue_index = i;
+		ring->pdev = adapter->pdev;
+		ring->netdev = adapter->netdev;
+		/* For 82575, context index must be unique per ring. */
+		if (adapter->hw.mac.type == e1000_82575)
+			ring->flags = IGB_RING_FLAG_TX_CTX_IDX;
 	}
+
 	for (i = 0; i < adapter->num_rx_queues; i++) {
 		struct igb_ring *ring = &(adapter->rx_ring[i]);
 		ring->count = adapter->rx_ring_count;
-		ring->adapter = adapter;
 		ring->queue_index = i;
-		ring->itr_register = E1000_ITR;
-
-		/* set a default napi handler for each rx_ring */
-		netif_napi_add(adapter->netdev, &ring->napi, igb_poll, 64);
+		ring->pdev = adapter->pdev;
+		ring->netdev = adapter->netdev;
+		ring->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
+		ring->flags = IGB_RING_FLAG_RX_CSUM; /* enable rx checksum */
+		/* set flag indicating ring supports SCTP checksum offload */
+		if (adapter->hw.mac.type >= e1000_82576)
+			ring->flags |= IGB_RING_FLAG_RX_SCTP_CSUM;
 	}
 
 	igb_cache_ring_register(adapter);
+
 	return 0;
-}
 
-static void igb_free_queues(struct igb_adapter *adapter)
-{
-	int i;
+err:
+	igb_free_queues(adapter);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		netif_napi_del(&adapter->rx_ring[i].napi);
-
-	adapter->num_rx_queues = 0;
-	adapter->num_tx_queues = 0;
-
-	kfree(adapter->tx_ring);
-	kfree(adapter->rx_ring);
+	return -ENOMEM;
 }
 
 #define IGB_N0_QUEUE -1
-static void igb_assign_vector(struct igb_adapter *adapter, int rx_queue,
-			      int tx_queue, int msix_vector)
+static void igb_assign_vector(struct igb_q_vector *q_vector, int msix_vector)
 {
 	u32 msixbm = 0;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 	u32 ivar, index;
+	int rx_queue = IGB_N0_QUEUE;
+	int tx_queue = IGB_N0_QUEUE;
+
+	if (q_vector->rx_ring)
+		rx_queue = q_vector->rx_ring->reg_idx;
+	if (q_vector->tx_ring)
+		tx_queue = q_vector->tx_ring->reg_idx;
 
 	switch (hw->mac.type) {
 	case e1000_82575:
@@ -483,16 +401,12 @@
 		   bitmask for the EICR/EIMS/EIMC registers.  To assign one
 		   or more queues to a vector, we write the appropriate bits
 		   into the MSIXBM register for that vector. */
-		if (rx_queue > IGB_N0_QUEUE) {
+		if (rx_queue > IGB_N0_QUEUE)
 			msixbm = E1000_EICR_RX_QUEUE0 << rx_queue;
-			adapter->rx_ring[rx_queue].eims_value = msixbm;
-		}
-		if (tx_queue > IGB_N0_QUEUE) {
+		if (tx_queue > IGB_N0_QUEUE)
 			msixbm |= E1000_EICR_TX_QUEUE0 << tx_queue;
-			adapter->tx_ring[tx_queue].eims_value =
-				  E1000_EICR_TX_QUEUE0 << tx_queue;
-		}
 		array_wr32(E1000_MSIXBM(0), msix_vector, msixbm);
+		q_vector->eims_value = msixbm;
 		break;
 	case e1000_82576:
 		/* 82576 uses a table-based method for assigning vectors.
@@ -500,35 +414,34 @@
 		   a vector number along with a "valid" bit.  Sadly, the layout
 		   of the table is somewhat counterintuitive. */
 		if (rx_queue > IGB_N0_QUEUE) {
-			index = (rx_queue >> 1) + adapter->vfs_allocated_count;
+			index = (rx_queue & 0x7);
 			ivar = array_rd32(E1000_IVAR0, index);
-			if (rx_queue & 0x1) {
-				/* vector goes into third byte of register */
-				ivar = ivar & 0xFF00FFFF;
-				ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
-			} else {
+			if (rx_queue < 8) {
 				/* vector goes into low byte of register */
 				ivar = ivar & 0xFFFFFF00;
 				ivar |= msix_vector | E1000_IVAR_VALID;
+			} else {
+				/* vector goes into third byte of register */
+				ivar = ivar & 0xFF00FFFF;
+				ivar |= (msix_vector | E1000_IVAR_VALID) << 16;
 			}
-			adapter->rx_ring[rx_queue].eims_value= 1 << msix_vector;
 			array_wr32(E1000_IVAR0, index, ivar);
 		}
 		if (tx_queue > IGB_N0_QUEUE) {
-			index = (tx_queue >> 1) + adapter->vfs_allocated_count;
+			index = (tx_queue & 0x7);
 			ivar = array_rd32(E1000_IVAR0, index);
-			if (tx_queue & 0x1) {
-				/* vector goes into high byte of register */
-				ivar = ivar & 0x00FFFFFF;
-				ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
-			} else {
+			if (tx_queue < 8) {
 				/* vector goes into second byte of register */
 				ivar = ivar & 0xFFFF00FF;
 				ivar |= (msix_vector | E1000_IVAR_VALID) << 8;
+			} else {
+				/* vector goes into high byte of register */
+				ivar = ivar & 0x00FFFFFF;
+				ivar |= (msix_vector | E1000_IVAR_VALID) << 24;
 			}
-			adapter->tx_ring[tx_queue].eims_value= 1 << msix_vector;
 			array_wr32(E1000_IVAR0, index, ivar);
 		}
+		q_vector->eims_value = 1 << msix_vector;
 		break;
 	default:
 		BUG();
@@ -549,43 +462,10 @@
 	struct e1000_hw *hw = &adapter->hw;
 
 	adapter->eims_enable_mask = 0;
-	if (hw->mac.type == e1000_82576)
-		/* Turn on MSI-X capability first, or our settings
-		 * won't stick.  And it will take days to debug. */
-		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
-				   E1000_GPIE_PBA | E1000_GPIE_EIAME |
- 				   E1000_GPIE_NSICR);
-
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *tx_ring = &adapter->tx_ring[i];
-		igb_assign_vector(adapter, IGB_N0_QUEUE, i, vector++);
-		adapter->eims_enable_mask |= tx_ring->eims_value;
-		if (tx_ring->itr_val)
-			writel(tx_ring->itr_val,
-			       hw->hw_addr + tx_ring->itr_register);
-		else
-			writel(1, hw->hw_addr + tx_ring->itr_register);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *rx_ring = &adapter->rx_ring[i];
-		rx_ring->buddy = NULL;
-		igb_assign_vector(adapter, i, IGB_N0_QUEUE, vector++);
-		adapter->eims_enable_mask |= rx_ring->eims_value;
-		if (rx_ring->itr_val)
-			writel(rx_ring->itr_val,
-			       hw->hw_addr + rx_ring->itr_register);
-		else
-			writel(1, hw->hw_addr + rx_ring->itr_register);
-	}
-
 
 	/* set vector for other causes, i.e. link changes */
 	switch (hw->mac.type) {
 	case e1000_82575:
-		array_wr32(E1000_MSIXBM(0), vector++,
-				      E1000_EIMS_OTHER);
-
 		tmp = rd32(E1000_CTRL_EXT);
 		/* enable MSI-X PBA support*/
 		tmp |= E1000_CTRL_EXT_PBA_CLR;
@@ -595,22 +475,40 @@
 		tmp |= E1000_CTRL_EXT_IRCA;
 
 		wr32(E1000_CTRL_EXT, tmp);
-		adapter->eims_enable_mask |= E1000_EIMS_OTHER;
+
+		/* enable msix_other interrupt */
+		array_wr32(E1000_MSIXBM(0), vector++,
+		                      E1000_EIMS_OTHER);
 		adapter->eims_other = E1000_EIMS_OTHER;
 
 		break;
 
 	case e1000_82576:
-		tmp = (vector++ | E1000_IVAR_VALID) << 8;
-		wr32(E1000_IVAR_MISC, tmp);
+		/* Turn on MSI-X capability first, or our settings
+		 * won't stick.  And it will take days to debug. */
+		wr32(E1000_GPIE, E1000_GPIE_MSIX_MODE |
+		                E1000_GPIE_PBA | E1000_GPIE_EIAME |
+		                E1000_GPIE_NSICR);
 
-		adapter->eims_enable_mask = (1 << (vector)) - 1;
-		adapter->eims_other = 1 << (vector - 1);
+		/* enable msix_other interrupt */
+		adapter->eims_other = 1 << vector;
+		tmp = (vector++ | E1000_IVAR_VALID) << 8;
+
+		wr32(E1000_IVAR_MISC, tmp);
 		break;
 	default:
 		/* do nothing, since nothing else supports MSI-X */
 		break;
 	} /* switch (hw->mac.type) */
+
+	adapter->eims_enable_mask |= adapter->eims_other;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		igb_assign_vector(q_vector, vector++);
+		adapter->eims_enable_mask |= q_vector->eims_value;
+	}
+
 	wrfl();
 }
 
@@ -623,42 +521,39 @@
 static int igb_request_msix(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	int i, err = 0, vector = 0;
 
-	vector = 0;
-
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *ring = &(adapter->tx_ring[i]);
-		sprintf(ring->name, "%s-tx-%d", netdev->name, i);
-		err = request_irq(adapter->msix_entries[vector].vector,
-				  &igb_msix_tx, 0, ring->name,
-				  &(adapter->tx_ring[i]));
-		if (err)
-			goto out;
-		ring->itr_register = E1000_EITR(0) + (vector << 2);
-		ring->itr_val = 976; /* ~4000 ints/sec */
-		vector++;
-	}
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &(adapter->rx_ring[i]);
-		if (strlen(netdev->name) < (IFNAMSIZ - 5))
-			sprintf(ring->name, "%s-rx-%d", netdev->name, i);
-		else
-			memcpy(ring->name, netdev->name, IFNAMSIZ);
-		err = request_irq(adapter->msix_entries[vector].vector,
-				  &igb_msix_rx, 0, ring->name,
-				  &(adapter->rx_ring[i]));
-		if (err)
-			goto out;
-		ring->itr_register = E1000_EITR(0) + (vector << 2);
-		ring->itr_val = adapter->itr;
-		vector++;
-	}
-
 	err = request_irq(adapter->msix_entries[vector].vector,
-			  &igb_msix_other, 0, netdev->name, netdev);
+	                  &igb_msix_other, 0, netdev->name, adapter);
 	if (err)
 		goto out;
+	vector++;
+
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(vector);
+
+		if (q_vector->rx_ring && q_vector->tx_ring)
+			sprintf(q_vector->name, "%s-TxRx-%u", netdev->name,
+			        q_vector->rx_ring->queue_index);
+		else if (q_vector->tx_ring)
+			sprintf(q_vector->name, "%s-tx-%u", netdev->name,
+			        q_vector->tx_ring->queue_index);
+		else if (q_vector->rx_ring)
+			sprintf(q_vector->name, "%s-rx-%u", netdev->name,
+			        q_vector->rx_ring->queue_index);
+		else
+			sprintf(q_vector->name, "%s-unused", netdev->name);
+
+		err = request_irq(adapter->msix_entries[vector].vector,
+		                  &igb_msix_ring, 0, q_vector->name,
+		                  q_vector);
+		if (err)
+			goto out;
+		vector++;
+	}
 
 	igb_configure_msix(adapter);
 	return 0;
@@ -672,11 +567,44 @@
 		pci_disable_msix(adapter->pdev);
 		kfree(adapter->msix_entries);
 		adapter->msix_entries = NULL;
-	} else if (adapter->flags & IGB_FLAG_HAS_MSI)
+	} else if (adapter->flags & IGB_FLAG_HAS_MSI) {
 		pci_disable_msi(adapter->pdev);
-	return;
+	}
 }
 
+/**
+ * igb_free_q_vectors - Free memory allocated for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * This function frees the memory allocated to the q_vectors.  In addition if
+ * NAPI is enabled it will delete any references to the NAPI struct prior
+ * to freeing the q_vector.
+ **/
+static void igb_free_q_vectors(struct igb_adapter *adapter)
+{
+	int v_idx;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[v_idx];
+		adapter->q_vector[v_idx] = NULL;
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+	}
+	adapter->num_q_vectors = 0;
+}
+
+/**
+ * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
+ *
+ * This function resets the device so that it has 0 rx queues, tx queues, and
+ * MSI-X interrupts allocated.
+ */
+static void igb_clear_interrupt_scheme(struct igb_adapter *adapter)
+{
+	igb_free_queues(adapter);
+	igb_free_q_vectors(adapter);
+	igb_reset_interrupt_capability(adapter);
+}
 
 /**
  * igb_set_interrupt_capability - set MSI or MSI-X if supported
@@ -690,11 +618,20 @@
 	int numvecs, i;
 
 	/* Number of supported queues. */
-	/* Having more queues than CPUs doesn't make sense. */
 	adapter->num_rx_queues = min_t(u32, IGB_MAX_RX_QUEUES, num_online_cpus());
 	adapter->num_tx_queues = min_t(u32, IGB_MAX_TX_QUEUES, num_online_cpus());
 
-	numvecs = adapter->num_tx_queues + adapter->num_rx_queues + 1;
+	/* start with one vector for every rx queue */
+	numvecs = adapter->num_rx_queues;
+
+	/* if tx handler is seperate add 1 for every tx queue */
+	numvecs += adapter->num_tx_queues;
+
+	/* store the number of vectors reserved for queues */
+	adapter->num_q_vectors = numvecs;
+
+	/* add 1 vector for link status interrupts */
+	numvecs++;
 	adapter->msix_entries = kcalloc(numvecs, sizeof(struct msix_entry),
 					GFP_KERNEL);
 	if (!adapter->msix_entries)
@@ -728,8 +665,11 @@
 		dev_info(&adapter->pdev->dev, "IOV Disabled\n");
 	}
 #endif
+	adapter->vfs_allocated_count = 0;
+	adapter->flags |= IGB_FLAG_QUEUE_PAIRS;
 	adapter->num_rx_queues = 1;
 	adapter->num_tx_queues = 1;
+	adapter->num_q_vectors = 1;
 	if (!pci_enable_msi(adapter->pdev))
 		adapter->flags |= IGB_FLAG_HAS_MSI;
 out:
@@ -739,6 +679,143 @@
 }
 
 /**
+ * igb_alloc_q_vectors - Allocate memory for interrupt vectors
+ * @adapter: board private structure to initialize
+ *
+ * We allocate one q_vector per queue interrupt.  If allocation fails we
+ * return -ENOMEM.
+ **/
+static int igb_alloc_q_vectors(struct igb_adapter *adapter)
+{
+	struct igb_q_vector *q_vector;
+	struct e1000_hw *hw = &adapter->hw;
+	int v_idx;
+
+	for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) {
+		q_vector = kzalloc(sizeof(struct igb_q_vector), GFP_KERNEL);
+		if (!q_vector)
+			goto err_out;
+		q_vector->adapter = adapter;
+		q_vector->itr_shift = (hw->mac.type == e1000_82575) ? 16 : 0;
+		q_vector->itr_register = hw->hw_addr + E1000_EITR(0);
+		q_vector->itr_val = IGB_START_ITR;
+		q_vector->set_itr = 1;
+		netif_napi_add(adapter->netdev, &q_vector->napi, igb_poll, 64);
+		adapter->q_vector[v_idx] = q_vector;
+	}
+	return 0;
+
+err_out:
+	while (v_idx) {
+		v_idx--;
+		q_vector = adapter->q_vector[v_idx];
+		netif_napi_del(&q_vector->napi);
+		kfree(q_vector);
+		adapter->q_vector[v_idx] = NULL;
+	}
+	return -ENOMEM;
+}
+
+static void igb_map_rx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector;
+
+	q_vector = adapter->q_vector[v_idx];
+	q_vector->rx_ring = &adapter->rx_ring[ring_idx];
+	q_vector->rx_ring->q_vector = q_vector;
+	q_vector->itr_val = adapter->rx_itr_setting;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+static void igb_map_tx_ring_to_vector(struct igb_adapter *adapter,
+                                      int ring_idx, int v_idx)
+{
+	struct igb_q_vector *q_vector;
+
+	q_vector = adapter->q_vector[v_idx];
+	q_vector->tx_ring = &adapter->tx_ring[ring_idx];
+	q_vector->tx_ring->q_vector = q_vector;
+	q_vector->itr_val = adapter->tx_itr_setting;
+	if (q_vector->itr_val && q_vector->itr_val <= 3)
+		q_vector->itr_val = IGB_START_ITR;
+}
+
+/**
+ * igb_map_ring_to_vector - maps allocated queues to vectors
+ *
+ * This function maps the recently allocated queues to vectors.
+ **/
+static int igb_map_ring_to_vector(struct igb_adapter *adapter)
+{
+	int i;
+	int v_idx = 0;
+
+	if ((adapter->num_q_vectors < adapter->num_rx_queues) ||
+	    (adapter->num_q_vectors < adapter->num_tx_queues))
+		return -ENOMEM;
+
+	if (adapter->num_q_vectors >=
+	    (adapter->num_rx_queues + adapter->num_tx_queues)) {
+		for (i = 0; i < adapter->num_rx_queues; i++)
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		for (i = 0; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	} else {
+		for (i = 0; i < adapter->num_rx_queues; i++) {
+			if (i < adapter->num_tx_queues)
+				igb_map_tx_ring_to_vector(adapter, i, v_idx);
+			igb_map_rx_ring_to_vector(adapter, i, v_idx++);
+		}
+		for (; i < adapter->num_tx_queues; i++)
+			igb_map_tx_ring_to_vector(adapter, i, v_idx++);
+	}
+	return 0;
+}
+
+/**
+ * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
+ *
+ * This function initializes the interrupts and allocates all of the queues.
+ **/
+static int igb_init_interrupt_scheme(struct igb_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	int err;
+
+	igb_set_interrupt_capability(adapter);
+
+	err = igb_alloc_q_vectors(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for vectors\n");
+		goto err_alloc_q_vectors;
+	}
+
+	err = igb_alloc_queues(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
+		goto err_alloc_queues;
+	}
+
+	err = igb_map_ring_to_vector(adapter);
+	if (err) {
+		dev_err(&pdev->dev, "Invalid q_vector to ring mapping\n");
+		goto err_map_queues;
+	}
+
+
+	return 0;
+err_map_queues:
+	igb_free_queues(adapter);
+err_alloc_queues:
+	igb_free_q_vectors(adapter);
+err_alloc_q_vectors:
+	igb_reset_interrupt_capability(adapter);
+	return err;
+}
+
+/**
  * igb_request_irq - initialize interrupts
  *
  * Attempts to configure interrupts using the best available
@@ -747,6 +824,7 @@
 static int igb_request_irq(struct igb_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	int err = 0;
 
@@ -755,18 +833,36 @@
 		if (!err)
 			goto request_done;
 		/* fall back to MSI */
-		igb_reset_interrupt_capability(adapter);
+		igb_clear_interrupt_scheme(adapter);
 		if (!pci_enable_msi(adapter->pdev))
 			adapter->flags |= IGB_FLAG_HAS_MSI;
 		igb_free_all_tx_resources(adapter);
 		igb_free_all_rx_resources(adapter);
+		adapter->num_tx_queues = 1;
 		adapter->num_rx_queues = 1;
-		igb_alloc_queues(adapter);
+		adapter->num_q_vectors = 1;
+		err = igb_alloc_q_vectors(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for vectors\n");
+			goto request_done;
+		}
+		err = igb_alloc_queues(adapter);
+		if (err) {
+			dev_err(&pdev->dev,
+			        "Unable to allocate memory for queues\n");
+			igb_free_q_vectors(adapter);
+			goto request_done;
+		}
+		igb_setup_all_tx_resources(adapter);
+		igb_setup_all_rx_resources(adapter);
 	} else {
 		switch (hw->mac.type) {
 		case e1000_82575:
 			wr32(E1000_MSIXBM(0),
-			     (E1000_EICR_RX_QUEUE0 | E1000_EIMS_OTHER));
+			     (E1000_EICR_RX_QUEUE0 |
+			      E1000_EICR_TX_QUEUE0 |
+			      E1000_EIMS_OTHER));
 			break;
 		case e1000_82576:
 			wr32(E1000_IVAR0, E1000_IVAR_VALID);
@@ -778,16 +874,17 @@
 
 	if (adapter->flags & IGB_FLAG_HAS_MSI) {
 		err = request_irq(adapter->pdev->irq, &igb_intr_msi, 0,
-				  netdev->name, netdev);
+				  netdev->name, adapter);
 		if (!err)
 			goto request_done;
+
 		/* fall back to legacy interrupts */
 		igb_reset_interrupt_capability(adapter);
 		adapter->flags &= ~IGB_FLAG_HAS_MSI;
 	}
 
 	err = request_irq(adapter->pdev->irq, &igb_intr, IRQF_SHARED,
-			  netdev->name, netdev);
+			  netdev->name, adapter);
 
 	if (err)
 		dev_err(&adapter->pdev->dev, "Error %d getting interrupt\n",
@@ -799,23 +896,19 @@
 
 static void igb_free_irq(struct igb_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
-
 	if (adapter->msix_entries) {
 		int vector = 0, i;
 
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			free_irq(adapter->msix_entries[vector++].vector,
-				&(adapter->tx_ring[i]));
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			free_irq(adapter->msix_entries[vector++].vector,
-				&(adapter->rx_ring[i]));
+		free_irq(adapter->msix_entries[vector++].vector, adapter);
 
-		free_irq(adapter->msix_entries[vector++].vector, netdev);
-		return;
+		for (i = 0; i < adapter->num_q_vectors; i++) {
+			struct igb_q_vector *q_vector = adapter->q_vector[i];
+			free_irq(adapter->msix_entries[vector++].vector,
+			         q_vector);
+		}
+	} else {
+		free_irq(adapter->pdev->irq, adapter);
 	}
-
-	free_irq(adapter->pdev->irq, netdev);
 }
 
 /**
@@ -826,6 +919,11 @@
 {
 	struct e1000_hw *hw = &adapter->hw;
 
+	/*
+	 * we need to be careful when disabling interrupts.  The VFs are also
+	 * mapped into these registers and so clearing the bits can cause
+	 * issues on the VF drivers so we only need to clear what we set
+	 */
 	if (adapter->msix_entries) {
 		u32 regval = rd32(E1000_EIAM);
 		wr32(E1000_EIAM, regval & ~adapter->eims_enable_mask);
@@ -849,15 +947,17 @@
 	struct e1000_hw *hw = &adapter->hw;
 
 	if (adapter->msix_entries) {
+		u32 ims = E1000_IMS_LSC | E1000_IMS_DOUTSYNC;
 		u32 regval = rd32(E1000_EIAC);
 		wr32(E1000_EIAC, regval | adapter->eims_enable_mask);
 		regval = rd32(E1000_EIAM);
 		wr32(E1000_EIAM, regval | adapter->eims_enable_mask);
 		wr32(E1000_EIMS, adapter->eims_enable_mask);
-		if (adapter->vfs_allocated_count)
+		if (adapter->vfs_allocated_count) {
 			wr32(E1000_MBVFIMR, 0xFF);
-		wr32(E1000_IMS, (E1000_IMS_LSC | E1000_IMS_VMMB |
-		                 E1000_IMS_DOUTSYNC));
+			ims |= E1000_IMS_VMMB;
+		}
+		wr32(E1000_IMS, ims);
 	} else {
 		wr32(E1000_IMS, IMS_ENABLE_MASK);
 		wr32(E1000_IAM, IMS_ENABLE_MASK);
@@ -866,24 +966,23 @@
 
 static void igb_update_mng_vlan(struct igb_adapter *adapter)
 {
-	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	u16 vid = adapter->hw.mng_cookie.vlan_id;
 	u16 old_vid = adapter->mng_vlan_id;
-	if (adapter->vlgrp) {
-		if (!vlan_group_get_device(adapter->vlgrp, vid)) {
-			if (adapter->hw.mng_cookie.status &
-				E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
-				igb_vlan_rx_add_vid(netdev, vid);
-				adapter->mng_vlan_id = vid;
-			} else
-				adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
 
-			if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
-					(vid != old_vid) &&
-			    !vlan_group_get_device(adapter->vlgrp, old_vid))
-				igb_vlan_rx_kill_vid(netdev, old_vid);
-		} else
-			adapter->mng_vlan_id = vid;
+	if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+		/* add VID to filter table */
+		igb_vfta_set(hw, vid, true);
+		adapter->mng_vlan_id = vid;
+	} else {
+		adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+	}
+
+	if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+	    (vid != old_vid) &&
+	    !vlan_group_get_device(adapter->vlgrp, old_vid)) {
+		/* remove VID from filter table */
+		igb_vfta_set(hw, old_vid, false);
 	}
 }
 
@@ -907,7 +1006,6 @@
 			ctrl_ext & ~E1000_CTRL_EXT_DRV_LOAD);
 }
 
-
 /**
  * igb_get_hw_control - get control of the h/w from f/w
  * @adapter: address of board private structure
@@ -942,8 +1040,11 @@
 
 	igb_restore_vlan(adapter);
 
-	igb_configure_tx(adapter);
+	igb_setup_tctl(adapter);
+	igb_setup_mrqc(adapter);
 	igb_setup_rctl(adapter);
+
+	igb_configure_tx(adapter);
 	igb_configure_rx(adapter);
 
 	igb_rx_fifo_flush_82575(&adapter->hw);
@@ -965,7 +1066,6 @@
  * igb_up - Open the interface and prepare it to handle traffic
  * @adapter: board private structure
  **/
-
 int igb_up(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
@@ -976,30 +1076,37 @@
 
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_enable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_enable(&q_vector->napi);
+	}
 	if (adapter->msix_entries)
 		igb_configure_msix(adapter);
 
-	igb_vmm_control(adapter);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
-	igb_set_vmolr(hw, adapter->vfs_allocated_count);
-
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
 	igb_irq_enable(adapter);
 
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
 	netif_tx_start_all_queues(adapter->netdev);
 
-	/* Fire a link change interrupt to start the watchdog. */
-	wr32(E1000_ICS, E1000_ICS_LSC);
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
+
 	return 0;
 }
 
 void igb_down(struct igb_adapter *adapter)
 {
-	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
+	struct e1000_hw *hw = &adapter->hw;
 	u32 tctl, rctl;
 	int i;
 
@@ -1022,8 +1129,10 @@
 	wrfl();
 	msleep(10);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_disable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_disable(&q_vector->napi);
+	}
 
 	igb_irq_disable(adapter);
 
@@ -1062,6 +1171,7 @@
 
 void igb_reset(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct e1000_mac_info *mac = &hw->mac;
 	struct e1000_fc_info *fc = &hw->fc;
@@ -1073,7 +1183,8 @@
 	 */
 	switch (mac->type) {
 	case e1000_82576:
-		pba = E1000_PBA_64K;
+		pba = rd32(E1000_RXPBS);
+		pba &= E1000_RXPBS_SIZE_MASK_82576;
 		break;
 	case e1000_82575:
 	default:
@@ -1148,10 +1259,10 @@
 	if (adapter->vfs_allocated_count) {
 		int i;
 		for (i = 0 ; i < adapter->vfs_allocated_count; i++)
-			adapter->vf_data[i].clear_to_send = false;
+			adapter->vf_data[i].flags = 0;
 
 		/* ping all the active vfs to let them know we are going down */
-			igb_ping_all_vfs(adapter);
+		igb_ping_all_vfs(adapter);
 
 		/* disable transmits and receives */
 		wr32(E1000_VFRE, 0);
@@ -1159,23 +1270,23 @@
 	}
 
 	/* Allow time for pending master requests to run */
-	adapter->hw.mac.ops.reset_hw(&adapter->hw);
+	hw->mac.ops.reset_hw(hw);
 	wr32(E1000_WUC, 0);
 
-	if (adapter->hw.mac.ops.init_hw(&adapter->hw))
-		dev_err(&adapter->pdev->dev, "Hardware Error\n");
+	if (hw->mac.ops.init_hw(hw))
+		dev_err(&pdev->dev, "Hardware Error\n");
 
 	igb_update_mng_vlan(adapter);
 
 	/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
 	wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
 
-	igb_reset_adaptive(&adapter->hw);
-	igb_get_phy_info(&adapter->hw);
+	igb_reset_adaptive(hw);
+	igb_get_phy_info(hw);
 }
 
 static const struct net_device_ops igb_netdev_ops = {
-	.ndo_open 		= igb_open,
+	.ndo_open		= igb_open,
 	.ndo_stop		= igb_close,
 	.ndo_start_xmit		= igb_xmit_frame_adv,
 	.ndo_get_stats		= igb_get_stats,
@@ -1211,10 +1322,11 @@
 	struct net_device *netdev;
 	struct igb_adapter *adapter;
 	struct e1000_hw *hw;
+	u16 eeprom_data = 0;
+	static int global_quad_port_a; /* global quad port a indication */
 	const struct e1000_info *ei = igb_info_tbl[ent->driver_data];
 	unsigned long mmio_start, mmio_len;
 	int err, pci_using_dac;
-	u16 eeprom_data = 0;
 	u16 eeprom_apme_mask = IGB_EEPROM_APME;
 	u32 part_num;
 
@@ -1291,8 +1403,6 @@
 	hw->subsystem_vendor_id = pdev->subsystem_vendor;
 	hw->subsystem_device_id = pdev->subsystem_device;
 
-	/* setup the private structure */
-	hw->back = adapter;
 	/* Copy the default MAC, PHY and NVM function pointers */
 	memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
 	memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
@@ -1302,46 +1412,6 @@
 	if (err)
 		goto err_sw_init;
 
-#ifdef CONFIG_PCI_IOV
-	/* since iov functionality isn't critical to base device function we
-	 * can accept failure.  If it fails we don't allow iov to be enabled */
-	if (hw->mac.type == e1000_82576) {
-		/* 82576 supports a maximum of 7 VFs in addition to the PF */
-		unsigned int num_vfs = (max_vfs > 7) ? 7 : max_vfs;
-		int i;
-		unsigned char mac_addr[ETH_ALEN];
-
-		if (num_vfs) {
-			adapter->vf_data = kcalloc(num_vfs,
-						sizeof(struct vf_data_storage),
-						GFP_KERNEL);
-			if (!adapter->vf_data) {
-				dev_err(&pdev->dev,
-				        "Could not allocate VF private data - "
-					"IOV enable failed\n");
-			} else {
-				err = pci_enable_sriov(pdev, num_vfs);
-				if (!err) {
-					adapter->vfs_allocated_count = num_vfs;
-					dev_info(&pdev->dev,
-					         "%d vfs allocated\n",
-					         num_vfs);
-					for (i = 0;
-					     i < adapter->vfs_allocated_count;
-					     i++) {
-						random_ether_addr(mac_addr);
-						igb_set_vf_mac(adapter, i,
-						               mac_addr);
-					}
-				} else {
-					kfree(adapter->vf_data);
-					adapter->vf_data = NULL;
-				}
-			}
-		}
-	}
-
-#endif
 	/* setup the private structure */
 	err = igb_sw_init(adapter);
 	if (err)
@@ -1349,16 +1419,6 @@
 
 	igb_get_bus_info_pcie(hw);
 
-	/* set flags */
-	switch (hw->mac.type) {
-	case e1000_82575:
-		adapter->flags |= IGB_FLAG_NEED_CTX_IDX;
-		break;
-	case e1000_82576:
-	default:
-		break;
-	}
-
 	hw->phy.autoneg_wait_to_complete = false;
 	hw->mac.adaptive_ifs = true;
 
@@ -1382,7 +1442,6 @@
 	netdev->features |= NETIF_F_IPV6_CSUM;
 	netdev->features |= NETIF_F_TSO;
 	netdev->features |= NETIF_F_TSO6;
-
 	netdev->features |= NETIF_F_GRO;
 
 	netdev->vlan_features |= NETIF_F_TSO;
@@ -1394,10 +1453,10 @@
 	if (pci_using_dac)
 		netdev->features |= NETIF_F_HIGHDMA;
 
-	if (adapter->hw.mac.type == e1000_82576)
+	if (hw->mac.type >= e1000_82576)
 		netdev->features |= NETIF_F_SCTP_CSUM;
 
-	adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
+	adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
 
 	/* before reading the NVM, reset the controller to put the device in a
 	 * known good starting state */
@@ -1439,9 +1498,6 @@
 	hw->fc.requested_mode = e1000_fc_default;
 	hw->fc.current_mode = e1000_fc_default;
 
-	adapter->itr_setting = IGB_DEFAULT_ITR;
-	adapter->itr = IGB_START_ITR;
-
 	igb_validate_mdi_setting(hw);
 
 	/* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
@@ -1508,66 +1564,64 @@
 		dev_info(&pdev->dev, "DCA enabled\n");
 		igb_setup_dca(adapter);
 	}
+
 #endif
+	switch (hw->mac.type) {
+	case e1000_82576:
+		/*
+		 * Initialize hardware timer: we keep it running just in case
+		 * that some program needs it later on.
+		 */
+		memset(&adapter->cycles, 0, sizeof(adapter->cycles));
+		adapter->cycles.read = igb_read_clock;
+		adapter->cycles.mask = CLOCKSOURCE_MASK(64);
+		adapter->cycles.mult = 1;
+		/**
+		 * Scale the NIC clock cycle by a large factor so that
+		 * relatively small clock corrections can be added or
+		 * substracted at each clock tick. The drawbacks of a large
+		 * factor are a) that the clock register overflows more quickly
+		 * (not such a big deal) and b) that the increment per tick has
+		 * to fit into 24 bits.  As a result we need to use a shift of
+		 * 19 so we can fit a value of 16 into the TIMINCA register.
+		 */
+		adapter->cycles.shift = IGB_82576_TSYNC_SHIFT;
+		wr32(E1000_TIMINCA,
+		                (1 << E1000_TIMINCA_16NS_SHIFT) |
+		                (16 << IGB_82576_TSYNC_SHIFT));
 
-	/*
-	 * Initialize hardware timer: we keep it running just in case
-	 * that some program needs it later on.
-	 */
-	memset(&adapter->cycles, 0, sizeof(adapter->cycles));
-	adapter->cycles.read = igb_read_clock;
-	adapter->cycles.mask = CLOCKSOURCE_MASK(64);
-	adapter->cycles.mult = 1;
-	adapter->cycles.shift = IGB_TSYNC_SHIFT;
-	wr32(E1000_TIMINCA,
-	     (1<<24) |
-	     IGB_TSYNC_CYCLE_TIME_IN_NANOSECONDS * IGB_TSYNC_SCALE);
-#if 0
-	/*
-	 * Avoid rollover while we initialize by resetting the time counter.
-	 */
-	wr32(E1000_SYSTIML, 0x00000000);
-	wr32(E1000_SYSTIMH, 0x00000000);
-#else
-	/*
-	 * Set registers so that rollover occurs soon to test this.
-	 */
-	wr32(E1000_SYSTIML, 0x00000000);
-	wr32(E1000_SYSTIMH, 0xFF800000);
-#endif
-	wrfl();
-	timecounter_init(&adapter->clock,
-			 &adapter->cycles,
-			 ktime_to_ns(ktime_get_real()));
+		/* Set registers so that rollover occurs soon to test this. */
+		wr32(E1000_SYSTIML, 0x00000000);
+		wr32(E1000_SYSTIMH, 0xFF800000);
+		wrfl();
 
-	/*
-	 * Synchronize our NIC clock against system wall clock. NIC
-	 * time stamp reading requires ~3us per sample, each sample
-	 * was pretty stable even under load => only require 10
-	 * samples for each offset comparison.
-	 */
-	memset(&adapter->compare, 0, sizeof(adapter->compare));
-	adapter->compare.source = &adapter->clock;
-	adapter->compare.target = ktime_get_real;
-	adapter->compare.num_samples = 10;
-	timecompare_update(&adapter->compare, 0);
-
-#ifdef DEBUG
-	{
-		char buffer[160];
-		printk(KERN_DEBUG
-			"igb: %s: hw %p initialized timer\n",
-			igb_get_time_str(adapter, buffer),
-			&adapter->hw);
+		timecounter_init(&adapter->clock,
+				 &adapter->cycles,
+				 ktime_to_ns(ktime_get_real()));
+		/*
+		 * Synchronize our NIC clock against system wall clock. NIC
+		 * time stamp reading requires ~3us per sample, each sample
+		 * was pretty stable even under load => only require 10
+		 * samples for each offset comparison.
+		 */
+		memset(&adapter->compare, 0, sizeof(adapter->compare));
+		adapter->compare.source = &adapter->clock;
+		adapter->compare.target = ktime_get_real;
+		adapter->compare.num_samples = 10;
+		timecompare_update(&adapter->compare, 0);
+		break;
+	case e1000_82575:
+		/* 82575 does not support timesync */
+	default:
+		break;
 	}
-#endif
 
 	dev_info(&pdev->dev, "Intel(R) Gigabit Ethernet Network Connection\n");
 	/* print bus type/speed/width info */
 	dev_info(&pdev->dev, "%s: (PCIe:%s:%s) %pM\n",
 		 netdev->name,
-		 ((hw->bus.speed == e1000_bus_speed_2500)
-		  ? "2.5Gb/s" : "unknown"),
+		 ((hw->bus.speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
+		                                            "unknown"),
 		 ((hw->bus.width == e1000_bus_width_pcie_x4) ? "Width x4" :
 		  (hw->bus.width == e1000_bus_width_pcie_x2) ? "Width x2" :
 		  (hw->bus.width == e1000_bus_width_pcie_x1) ? "Width x1" :
@@ -1594,15 +1648,14 @@
 
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-
-	igb_free_queues(adapter);
 err_sw_init:
+	igb_clear_interrupt_scheme(adapter);
 	iounmap(hw->hw_addr);
 err_ioremap:
 	free_netdev(netdev);
 err_alloc_etherdev:
-	pci_release_selected_regions(pdev, pci_select_bars(pdev,
-	                             IORESOURCE_MEM));
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 err_pci_reg:
 err_dma:
 	pci_disable_device(pdev);
@@ -1647,12 +1700,10 @@
 
 	unregister_netdev(netdev);
 
-	if (!igb_check_reset_block(&adapter->hw))
-		igb_reset_phy(&adapter->hw);
+	if (!igb_check_reset_block(hw))
+		igb_reset_phy(hw);
 
-	igb_reset_interrupt_capability(adapter);
-
-	igb_free_queues(adapter);
+	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PCI_IOV
 	/* reclaim resources allocated to VFs */
@@ -1668,11 +1719,12 @@
 		dev_info(&pdev->dev, "IOV Disabled\n");
 	}
 #endif
+
 	iounmap(hw->hw_addr);
 	if (hw->flash_address)
 		iounmap(hw->flash_address);
-	pci_release_selected_regions(pdev, pci_select_bars(pdev,
-	                             IORESOURCE_MEM));
+	pci_release_selected_regions(pdev,
+	                             pci_select_bars(pdev, IORESOURCE_MEM));
 
 	free_netdev(netdev);
 
@@ -1682,6 +1734,54 @@
 }
 
 /**
+ * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
+ * @adapter: board private structure to initialize
+ *
+ * This function initializes the vf specific data storage and then attempts to
+ * allocate the VFs.  The reason for ordering it this way is because it is much
+ * mor expensive time wise to disable SR-IOV than it is to allocate and free
+ * the memory for the VFs.
+ **/
+static void __devinit igb_probe_vfs(struct igb_adapter * adapter)
+{
+#ifdef CONFIG_PCI_IOV
+	struct pci_dev *pdev = adapter->pdev;
+
+	if (adapter->vfs_allocated_count > 7)
+		adapter->vfs_allocated_count = 7;
+
+	if (adapter->vfs_allocated_count) {
+		adapter->vf_data = kcalloc(adapter->vfs_allocated_count,
+		                           sizeof(struct vf_data_storage),
+		                           GFP_KERNEL);
+		/* if allocation failed then we do not support SR-IOV */
+		if (!adapter->vf_data) {
+			adapter->vfs_allocated_count = 0;
+			dev_err(&pdev->dev, "Unable to allocate memory for VF "
+			        "Data Storage\n");
+		}
+	}
+
+	if (pci_enable_sriov(pdev, adapter->vfs_allocated_count)) {
+		kfree(adapter->vf_data);
+		adapter->vf_data = NULL;
+#endif /* CONFIG_PCI_IOV */
+		adapter->vfs_allocated_count = 0;
+#ifdef CONFIG_PCI_IOV
+	} else {
+		unsigned char mac_addr[ETH_ALEN];
+		int i;
+		dev_info(&pdev->dev, "%d vfs allocated\n",
+		         adapter->vfs_allocated_count);
+		for (i = 0; i < adapter->vfs_allocated_count; i++) {
+			random_ether_addr(mac_addr);
+			igb_set_vf_mac(adapter, i, mac_addr);
+		}
+	}
+#endif /* CONFIG_PCI_IOV */
+}
+
+/**
  * igb_sw_init - Initialize general software structures (struct igb_adapter)
  * @adapter: board private structure to initialize
  *
@@ -1699,20 +1799,25 @@
 
 	adapter->tx_ring_count = IGB_DEFAULT_TXD;
 	adapter->rx_ring_count = IGB_DEFAULT_RXD;
-	adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-	adapter->rx_ps_hdr_size = 0; /* disable packet split */
+	adapter->rx_itr_setting = IGB_DEFAULT_ITR;
+	adapter->tx_itr_setting = IGB_DEFAULT_ITR;
+
 	adapter->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
 	adapter->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
 
-	/* This call may decrease the number of queues depending on
-	 * interrupt mode. */
-	igb_set_interrupt_capability(adapter);
+#ifdef CONFIG_PCI_IOV
+	if (hw->mac.type == e1000_82576)
+		adapter->vfs_allocated_count = max_vfs;
 
-	if (igb_alloc_queues(adapter)) {
+#endif /* CONFIG_PCI_IOV */
+	/* This call may decrease the number of queues */
+	if (igb_init_interrupt_scheme(adapter)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
 	}
 
+	igb_probe_vfs(adapter);
+
 	/* Explicitly disable IRQ since the NIC can be in any state. */
 	igb_irq_disable(adapter);
 
@@ -1757,21 +1862,12 @@
 
 	/* e1000_power_up_phy(adapter); */
 
-	adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
-	if ((adapter->hw.mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
-		igb_update_mng_vlan(adapter);
-
 	/* before we allocate an interrupt, we must be ready to handle it.
 	 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
 	 * as soon as we call pci_request_irq, so we have to setup our
 	 * clean_rx handler before we do so.  */
 	igb_configure(adapter);
 
-	igb_vmm_control(adapter);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
-	igb_set_vmolr(hw, adapter->vfs_allocated_count);
-
 	err = igb_request_irq(adapter);
 	if (err)
 		goto err_req_irq;
@@ -1779,18 +1875,28 @@
 	/* From here on the code is the same as igb_up() */
 	clear_bit(__IGB_DOWN, &adapter->state);
 
-	for (i = 0; i < adapter->num_rx_queues; i++)
-		napi_enable(&adapter->rx_ring[i].napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		napi_enable(&q_vector->napi);
+	}
 
 	/* Clear any pending interrupts. */
 	rd32(E1000_ICR);
 
 	igb_irq_enable(adapter);
 
+	/* notify VFs that reset has been completed */
+	if (adapter->vfs_allocated_count) {
+		u32 reg_data = rd32(E1000_CTRL_EXT);
+		reg_data |= E1000_CTRL_EXT_PFRSTD;
+		wr32(E1000_CTRL_EXT, reg_data);
+	}
+
 	netif_tx_start_all_queues(netdev);
 
-	/* Fire a link status change interrupt to start the watchdog. */
-	wr32(E1000_ICS, E1000_ICS_LSC);
+	/* start the watchdog. */
+	hw->mac.get_link_status = 1;
+	schedule_work(&adapter->watchdog_task);
 
 	return 0;
 
@@ -1829,28 +1935,18 @@
 	igb_free_all_tx_resources(adapter);
 	igb_free_all_rx_resources(adapter);
 
-	/* kill manageability vlan ID if supported, but not if a vlan with
-	 * the same ID is registered on the host OS (let 8021q kill it) */
-	if ((adapter->hw.mng_cookie.status &
-			  E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	     !(adapter->vlgrp &&
-	       vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
-		igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-
 	return 0;
 }
 
 /**
  * igb_setup_tx_resources - allocate Tx resources (Descriptors)
- * @adapter: board private structure
  * @tx_ring: tx descriptor ring (for a specific queue) to setup
  *
  * Return 0 on success, negative on failure
  **/
-int igb_setup_tx_resources(struct igb_adapter *adapter,
-			   struct igb_ring *tx_ring)
+int igb_setup_tx_resources(struct igb_ring *tx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *pdev = tx_ring->pdev;
 	int size;
 
 	size = sizeof(struct igb_buffer) * tx_ring->count;
@@ -1863,20 +1959,20 @@
 	tx_ring->size = tx_ring->count * sizeof(union e1000_adv_tx_desc);
 	tx_ring->size = ALIGN(tx_ring->size, 4096);
 
-	tx_ring->desc = pci_alloc_consistent(pdev, tx_ring->size,
+	tx_ring->desc = pci_alloc_consistent(pdev,
+	                                     tx_ring->size,
 					     &tx_ring->dma);
 
 	if (!tx_ring->desc)
 		goto err;
 
-	tx_ring->adapter = adapter;
 	tx_ring->next_to_use = 0;
 	tx_ring->next_to_clean = 0;
 	return 0;
 
 err:
 	vfree(tx_ring->buffer_info);
-	dev_err(&adapter->pdev->dev,
+	dev_err(&pdev->dev,
 		"Unable to allocate memory for the transmit descriptor ring\n");
 	return -ENOMEM;
 }
@@ -1890,13 +1986,13 @@
  **/
 static int igb_setup_all_tx_resources(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	int i, err = 0;
-	int r_idx;
 
 	for (i = 0; i < adapter->num_tx_queues; i++) {
-		err = igb_setup_tx_resources(adapter, &adapter->tx_ring[i]);
+		err = igb_setup_tx_resources(&adapter->tx_ring[i]);
 		if (err) {
-			dev_err(&adapter->pdev->dev,
+			dev_err(&pdev->dev,
 				"Allocation for Tx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
 				igb_free_tx_resources(&adapter->tx_ring[i]);
@@ -1905,13 +2001,80 @@
 	}
 
 	for (i = 0; i < IGB_MAX_TX_QUEUES; i++) {
-		r_idx = i % adapter->num_tx_queues;
+		int r_idx = i % adapter->num_tx_queues;
 		adapter->multi_tx_table[i] = &adapter->tx_ring[r_idx];
 	}
 	return err;
 }
 
 /**
+ * igb_setup_tctl - configure the transmit control registers
+ * @adapter: Board private structure
+ **/
+void igb_setup_tctl(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 tctl;
+
+	/* disable queue 0 which is enabled by default on 82575 and 82576 */
+	wr32(E1000_TXDCTL(0), 0);
+
+	/* Program the Transmit Control Register */
+	tctl = rd32(E1000_TCTL);
+	tctl &= ~E1000_TCTL_CT;
+	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
+		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
+
+	igb_config_collision_dist(hw);
+
+	/* Enable transmits */
+	tctl |= E1000_TCTL_EN;
+
+	wr32(E1000_TCTL, tctl);
+}
+
+/**
+ * igb_configure_tx_ring - Configure transmit ring after Reset
+ * @adapter: board private structure
+ * @ring: tx ring to configure
+ *
+ * Configure a transmit ring after a reset.
+ **/
+void igb_configure_tx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 txdctl;
+	u64 tdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+
+	/* disable the queue */
+	txdctl = rd32(E1000_TXDCTL(reg_idx));
+	wr32(E1000_TXDCTL(reg_idx),
+	                txdctl & ~E1000_TXDCTL_QUEUE_ENABLE);
+	wrfl();
+	mdelay(10);
+
+	wr32(E1000_TDLEN(reg_idx),
+	                ring->count * sizeof(union e1000_adv_tx_desc));
+	wr32(E1000_TDBAL(reg_idx),
+	                tdba & 0x00000000ffffffffULL);
+	wr32(E1000_TDBAH(reg_idx), tdba >> 32);
+
+	ring->head = hw->hw_addr + E1000_TDH(reg_idx);
+	ring->tail = hw->hw_addr + E1000_TDT(reg_idx);
+	writel(0, ring->head);
+	writel(0, ring->tail);
+
+	txdctl |= IGB_TX_PTHRESH;
+	txdctl |= IGB_TX_HTHRESH << 8;
+	txdctl |= IGB_TX_WTHRESH << 16;
+
+	txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
+	wr32(E1000_TXDCTL(reg_idx), txdctl);
+}
+
+/**
  * igb_configure_tx - Configure transmit Unit after Reset
  * @adapter: board private structure
  *
@@ -1919,71 +2082,21 @@
  **/
 static void igb_configure_tx(struct igb_adapter *adapter)
 {
-	u64 tdba;
-	struct e1000_hw *hw = &adapter->hw;
-	u32 tctl;
-	u32 txdctl, txctrl;
-	int i, j;
+	int i;
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *ring = &adapter->tx_ring[i];
-		j = ring->reg_idx;
-		wr32(E1000_TDLEN(j),
-		     ring->count * sizeof(union e1000_adv_tx_desc));
-		tdba = ring->dma;
-		wr32(E1000_TDBAL(j),
-		     tdba & 0x00000000ffffffffULL);
-		wr32(E1000_TDBAH(j), tdba >> 32);
-
-		ring->head = E1000_TDH(j);
-		ring->tail = E1000_TDT(j);
-		writel(0, hw->hw_addr + ring->tail);
-		writel(0, hw->hw_addr + ring->head);
-		txdctl = rd32(E1000_TXDCTL(j));
-		txdctl |= E1000_TXDCTL_QUEUE_ENABLE;
-		wr32(E1000_TXDCTL(j), txdctl);
-
-		/* Turn off Relaxed Ordering on head write-backs.  The
-		 * writebacks MUST be delivered in order or it will
-		 * completely screw up our bookeeping.
-		 */
-		txctrl = rd32(E1000_DCA_TXCTRL(j));
-		txctrl &= ~E1000_DCA_TXCTRL_TX_WB_RO_EN;
-		wr32(E1000_DCA_TXCTRL(j), txctrl);
-	}
-
-	/* disable queue 0 to prevent tail bump w/o re-configuration */
-	if (adapter->vfs_allocated_count)
-		wr32(E1000_TXDCTL(0), 0);
-
-	/* Program the Transmit Control Register */
-	tctl = rd32(E1000_TCTL);
-	tctl &= ~E1000_TCTL_CT;
-	tctl |= E1000_TCTL_PSP | E1000_TCTL_RTLC |
-		(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
-
-	igb_config_collision_dist(hw);
-
-	/* Setup Transmit Descriptor Settings for eop descriptor */
-	adapter->txd_cmd = E1000_TXD_CMD_EOP | E1000_TXD_CMD_RS;
-
-	/* Enable transmits */
-	tctl |= E1000_TCTL_EN;
-
-	wr32(E1000_TCTL, tctl);
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		igb_configure_tx_ring(adapter, &adapter->tx_ring[i]);
 }
 
 /**
  * igb_setup_rx_resources - allocate Rx resources (Descriptors)
- * @adapter: board private structure
  * @rx_ring:    rx descriptor ring (for a specific queue) to setup
  *
  * Returns 0 on success, negative on failure
  **/
-int igb_setup_rx_resources(struct igb_adapter *adapter,
-			   struct igb_ring *rx_ring)
+int igb_setup_rx_resources(struct igb_ring *rx_ring)
 {
-	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *pdev = rx_ring->pdev;
 	int size, desc_len;
 
 	size = sizeof(struct igb_buffer) * rx_ring->count;
@@ -2007,13 +2120,12 @@
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
 
-	rx_ring->adapter = adapter;
-
 	return 0;
 
 err:
 	vfree(rx_ring->buffer_info);
-	dev_err(&adapter->pdev->dev, "Unable to allocate memory for "
+	rx_ring->buffer_info = NULL;
+	dev_err(&pdev->dev, "Unable to allocate memory for "
 		"the receive descriptor ring\n");
 	return -ENOMEM;
 }
@@ -2027,12 +2139,13 @@
  **/
 static int igb_setup_all_rx_resources(struct igb_adapter *adapter)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	int i, err = 0;
 
 	for (i = 0; i < adapter->num_rx_queues; i++) {
-		err = igb_setup_rx_resources(adapter, &adapter->rx_ring[i]);
+		err = igb_setup_rx_resources(&adapter->rx_ring[i]);
 		if (err) {
-			dev_err(&adapter->pdev->dev,
+			dev_err(&pdev->dev,
 				"Allocation for Rx Queue %u failed\n", i);
 			for (i--; i >= 0; i--)
 				igb_free_rx_resources(&adapter->rx_ring[i]);
@@ -2044,15 +2157,118 @@
 }
 
 /**
+ * igb_setup_mrqc - configure the multiple receive queue control registers
+ * @adapter: Board private structure
+ **/
+static void igb_setup_mrqc(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 mrqc, rxcsum;
+	u32 j, num_rx_queues, shift = 0, shift2 = 0;
+	union e1000_reta {
+		u32 dword;
+		u8  bytes[4];
+	} reta;
+	static const u8 rsshash[40] = {
+		0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2, 0x41, 0x67,
+		0x25, 0x3d, 0x43, 0xa3, 0x8f, 0xb0, 0xd0, 0xca, 0x2b, 0xcb,
+		0xae, 0x7b, 0x30, 0xb4,	0x77, 0xcb, 0x2d, 0xa3, 0x80, 0x30,
+		0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b, 0xbe, 0xac, 0x01, 0xfa };
+
+	/* Fill out hash function seeds */
+	for (j = 0; j < 10; j++) {
+		u32 rsskey = rsshash[(j * 4)];
+		rsskey |= rsshash[(j * 4) + 1] << 8;
+		rsskey |= rsshash[(j * 4) + 2] << 16;
+		rsskey |= rsshash[(j * 4) + 3] << 24;
+		array_wr32(E1000_RSSRK(0), j, rsskey);
+	}
+
+	num_rx_queues = adapter->num_rx_queues;
+
+	if (adapter->vfs_allocated_count) {
+		/* 82575 and 82576 supports 2 RSS queues for VMDq */
+		switch (hw->mac.type) {
+		case e1000_82576:
+			shift = 3;
+			num_rx_queues = 2;
+			break;
+		case e1000_82575:
+			shift = 2;
+			shift2 = 6;
+		default:
+			break;
+		}
+	} else {
+		if (hw->mac.type == e1000_82575)
+			shift = 6;
+	}
+
+	for (j = 0; j < (32 * 4); j++) {
+		reta.bytes[j & 3] = (j % num_rx_queues) << shift;
+		if (shift2)
+			reta.bytes[j & 3] |= num_rx_queues << shift2;
+		if ((j & 3) == 3)
+			wr32(E1000_RETA(j >> 2), reta.dword);
+	}
+
+	/*
+	 * Disable raw packet checksumming so that RSS hash is placed in
+	 * descriptor on writeback.  No need to enable TCP/UDP/IP checksum
+	 * offloads as they are enabled by default
+	 */
+	rxcsum = rd32(E1000_RXCSUM);
+	rxcsum |= E1000_RXCSUM_PCSD;
+
+	if (adapter->hw.mac.type >= e1000_82576)
+		/* Enable Receive Checksum Offload for SCTP */
+		rxcsum |= E1000_RXCSUM_CRCOFL;
+
+	/* Don't need to set TUOFL or IPOFL, they default to 1 */
+	wr32(E1000_RXCSUM, rxcsum);
+
+	/* If VMDq is enabled then we set the appropriate mode for that, else
+	 * we default to RSS so that an RSS hash is calculated per packet even
+	 * if we are only using one queue */
+	if (adapter->vfs_allocated_count) {
+		if (hw->mac.type > e1000_82575) {
+			/* Set the default pool for the PF's first queue */
+			u32 vtctl = rd32(E1000_VT_CTL);
+			vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
+				   E1000_VT_CTL_DISABLE_DEF_POOL);
+			vtctl |= adapter->vfs_allocated_count <<
+				E1000_VT_CTL_DEFAULT_POOL_SHIFT;
+			wr32(E1000_VT_CTL, vtctl);
+		}
+		if (adapter->num_rx_queues > 1)
+			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
+		else
+			mrqc = E1000_MRQC_ENABLE_VMDQ;
+	} else {
+		mrqc = E1000_MRQC_ENABLE_RSS_4Q;
+	}
+	igb_vmm_control(adapter);
+
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
+		 E1000_MRQC_RSS_FIELD_IPV4_TCP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
+		 E1000_MRQC_RSS_FIELD_IPV6_TCP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP |
+		 E1000_MRQC_RSS_FIELD_IPV6_UDP);
+	mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
+		 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
+
+	wr32(E1000_MRQC, mrqc);
+}
+
+/**
  * igb_setup_rctl - configure the receive control registers
  * @adapter: Board private structure
  **/
-static void igb_setup_rctl(struct igb_adapter *adapter)
+void igb_setup_rctl(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	u32 rctl;
-	u32 srrctl = 0;
-	int i;
 
 	rctl = rd32(E1000_RCTL);
 
@@ -2069,77 +2285,47 @@
 	 */
 	rctl |= E1000_RCTL_SECRC;
 
-	/*
-	 * disable store bad packets and clear size bits.
-	 */
+	/* disable store bad packets and clear size bits. */
 	rctl &= ~(E1000_RCTL_SBP | E1000_RCTL_SZ_256);
 
-	/* enable LPE when to prevent packets larger than max_frame_size */
-		rctl |= E1000_RCTL_LPE;
+	/* enable LPE to prevent packets larger than max_frame_size */
+	rctl |= E1000_RCTL_LPE;
 
-	/* Setup buffer sizes */
-	switch (adapter->rx_buffer_len) {
-	case IGB_RXBUFFER_256:
-		rctl |= E1000_RCTL_SZ_256;
-		break;
-	case IGB_RXBUFFER_512:
-		rctl |= E1000_RCTL_SZ_512;
-		break;
-	default:
-		srrctl = ALIGN(adapter->rx_buffer_len, 1024)
-		         >> E1000_SRRCTL_BSIZEPKT_SHIFT;
-		break;
-	}
-
-	/* 82575 and greater support packet-split where the protocol
-	 * header is placed in skb->data and the packet data is
-	 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
-	 * In the case of a non-split, skb->data is linearly filled,
-	 * followed by the page buffers.  Therefore, skb->data is
-	 * sized to hold the largest protocol header.
-	 */
-	/* allocations using alloc_page take too long for regular MTU
-	 * so only enable packet split for jumbo frames */
-	if (adapter->netdev->mtu > ETH_DATA_LEN) {
-		adapter->rx_ps_hdr_size = IGB_RXBUFFER_128;
-		srrctl |= adapter->rx_ps_hdr_size <<
-			 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
-		srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
-	} else {
-		adapter->rx_ps_hdr_size = 0;
-		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
-	}
+	/* disable queue 0 to prevent tail write w/o re-config */
+	wr32(E1000_RXDCTL(0), 0);
 
 	/* Attention!!!  For SR-IOV PF driver operations you must enable
 	 * queue drop for all VF and PF queues to prevent head of line blocking
 	 * if an un-trusted VF does not provide descriptors to hardware.
 	 */
 	if (adapter->vfs_allocated_count) {
-		u32 vmolr;
-
 		/* set all queue drop enable bits */
 		wr32(E1000_QDE, ALL_QUEUES);
-		srrctl |= E1000_SRRCTL_DROP_EN;
-
-		/* disable queue 0 to prevent tail write w/o re-config */
-		wr32(E1000_RXDCTL(0), 0);
-
-		vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
-		if (rctl & E1000_RCTL_LPE)
-			vmolr |= E1000_VMOLR_LPE;
-		if (adapter->num_rx_queues > 1)
-			vmolr |= E1000_VMOLR_RSSE;
-		wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		int j = adapter->rx_ring[i].reg_idx;
-		wr32(E1000_SRRCTL(j), srrctl);
 	}
 
 	wr32(E1000_RCTL, rctl);
 }
 
+static inline int igb_set_vf_rlpml(struct igb_adapter *adapter, int size,
+                                   int vfn)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr;
+
+	/* if it isn't the PF check to see if VFs are enabled and
+	 * increase the size to support vlan tags */
+	if (vfn < adapter->vfs_allocated_count &&
+	    adapter->vf_data[vfn].vlans_enabled)
+		size += VLAN_TAG_SIZE;
+
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr &= ~E1000_VMOLR_RLPML_MASK;
+	vmolr |= size | E1000_VMOLR_LPE;
+	wr32(E1000_VMOLR(vfn), vmolr);
+
+	return 0;
+}
+
 /**
  * igb_rlpml_set - set maximum receive packet size
  * @adapter: board private structure
@@ -2159,33 +2345,107 @@
 	 * size and set the VMOLR RLPML to the size we need */
 	if (pf_id) {
 		igb_set_vf_rlpml(adapter, max_frame_size, pf_id);
-		max_frame_size = MAX_STD_JUMBO_FRAME_SIZE + VLAN_TAG_SIZE;
+		max_frame_size = MAX_JUMBO_FRAME_SIZE;
 	}
 
 	wr32(E1000_RLPML, max_frame_size);
 }
 
-/**
- * igb_configure_vt_default_pool - Configure VT default pool
- * @adapter: board private structure
- *
- * Configure the default pool
- **/
-static void igb_configure_vt_default_pool(struct igb_adapter *adapter)
+static inline void igb_set_vmolr(struct igb_adapter *adapter, int vfn)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u16 pf_id = adapter->vfs_allocated_count;
-	u32 vtctl;
+	u32 vmolr;
 
-	/* not in sr-iov mode - do nothing */
-	if (!pf_id)
+	/*
+	 * This register exists only on 82576 and newer so if we are older then
+	 * we should exit and do nothing
+	 */
+	if (hw->mac.type < e1000_82576)
 		return;
 
-	vtctl = rd32(E1000_VT_CTL);
-	vtctl &= ~(E1000_VT_CTL_DEFAULT_POOL_MASK |
-		   E1000_VT_CTL_DISABLE_DEF_POOL);
-	vtctl |= pf_id << E1000_VT_CTL_DEFAULT_POOL_SHIFT;
-	wr32(E1000_VT_CTL, vtctl);
+	vmolr = rd32(E1000_VMOLR(vfn));
+	vmolr |= E1000_VMOLR_AUPE |        /* Accept untagged packets */
+	         E1000_VMOLR_STRVLAN;      /* Strip vlan tags */
+
+	/* clear all bits that might not be set */
+	vmolr &= ~(E1000_VMOLR_BAM | E1000_VMOLR_RSSE);
+
+	if (adapter->num_rx_queues > 1 && vfn == adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_RSSE; /* enable RSS */
+	/*
+	 * for VMDq only allow the VFs and pool 0 to accept broadcast and
+	 * multicast packets
+	 */
+	if (vfn <= adapter->vfs_allocated_count)
+		vmolr |= E1000_VMOLR_BAM;	   /* Accept broadcast */
+
+	wr32(E1000_VMOLR(vfn), vmolr);
+}
+
+/**
+ * igb_configure_rx_ring - Configure a receive ring after Reset
+ * @adapter: board private structure
+ * @ring: receive ring to be configured
+ *
+ * Configure the Rx unit of the MAC after a reset.
+ **/
+void igb_configure_rx_ring(struct igb_adapter *adapter,
+                           struct igb_ring *ring)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u64 rdba = ring->dma;
+	int reg_idx = ring->reg_idx;
+	u32 srrctl, rxdctl;
+
+	/* disable the queue */
+	rxdctl = rd32(E1000_RXDCTL(reg_idx));
+	wr32(E1000_RXDCTL(reg_idx),
+	                rxdctl & ~E1000_RXDCTL_QUEUE_ENABLE);
+
+	/* Set DMA base address registers */
+	wr32(E1000_RDBAL(reg_idx),
+	     rdba & 0x00000000ffffffffULL);
+	wr32(E1000_RDBAH(reg_idx), rdba >> 32);
+	wr32(E1000_RDLEN(reg_idx),
+	               ring->count * sizeof(union e1000_adv_rx_desc));
+
+	/* initialize head and tail */
+	ring->head = hw->hw_addr + E1000_RDH(reg_idx);
+	ring->tail = hw->hw_addr + E1000_RDT(reg_idx);
+	writel(0, ring->head);
+	writel(0, ring->tail);
+
+	/* set descriptor configuration */
+	if (ring->rx_buffer_len < IGB_RXBUFFER_1024) {
+		srrctl = ALIGN(ring->rx_buffer_len, 64) <<
+		         E1000_SRRCTL_BSIZEHDRSIZE_SHIFT;
+#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
+		srrctl |= IGB_RXBUFFER_16384 >>
+		          E1000_SRRCTL_BSIZEPKT_SHIFT;
+#else
+		srrctl |= (PAGE_SIZE / 2) >>
+		          E1000_SRRCTL_BSIZEPKT_SHIFT;
+#endif
+		srrctl |= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
+	} else {
+		srrctl = ALIGN(ring->rx_buffer_len, 1024) >>
+		         E1000_SRRCTL_BSIZEPKT_SHIFT;
+		srrctl |= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF;
+	}
+
+	wr32(E1000_SRRCTL(reg_idx), srrctl);
+
+	/* set filtering for VMDQ pools */
+	igb_set_vmolr(adapter, reg_idx & 0x7);
+
+	/* enable receive descriptor fetching */
+	rxdctl = rd32(E1000_RXDCTL(reg_idx));
+	rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
+	rxdctl &= 0xFFF00000;
+	rxdctl |= IGB_RX_PTHRESH;
+	rxdctl |= IGB_RX_HTHRESH << 8;
+	rxdctl |= IGB_RX_WTHRESH << 16;
+	wr32(E1000_RXDCTL(reg_idx), rxdctl);
 }
 
 /**
@@ -2196,112 +2456,19 @@
  **/
 static void igb_configure_rx(struct igb_adapter *adapter)
 {
-	u64 rdba;
-	struct e1000_hw *hw = &adapter->hw;
-	u32 rctl, rxcsum;
-	u32 rxdctl;
 	int i;
 
-	/* disable receives while setting up the descriptors */
-	rctl = rd32(E1000_RCTL);
-	wr32(E1000_RCTL, rctl & ~E1000_RCTL_EN);
-	wrfl();
-	mdelay(10);
+	/* set UTA to appropriate mode */
+	igb_set_uta(adapter);
 
-	if (adapter->itr_setting > 3)
-		wr32(E1000_ITR, adapter->itr);
+	/* set the correct pool for the PF default MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, adapter->hw.mac.addr, 0,
+	                 adapter->vfs_allocated_count);
 
 	/* Setup the HW Rx Head and Tail Descriptor Pointers and
 	 * the Base and Length of the Rx Descriptor Ring */
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *ring = &adapter->rx_ring[i];
-		int j = ring->reg_idx;
-		rdba = ring->dma;
-		wr32(E1000_RDBAL(j),
-		     rdba & 0x00000000ffffffffULL);
-		wr32(E1000_RDBAH(j), rdba >> 32);
-		wr32(E1000_RDLEN(j),
-		     ring->count * sizeof(union e1000_adv_rx_desc));
-
-		ring->head = E1000_RDH(j);
-		ring->tail = E1000_RDT(j);
-		writel(0, hw->hw_addr + ring->tail);
-		writel(0, hw->hw_addr + ring->head);
-
-		rxdctl = rd32(E1000_RXDCTL(j));
-		rxdctl |= E1000_RXDCTL_QUEUE_ENABLE;
-		rxdctl &= 0xFFF00000;
-		rxdctl |= IGB_RX_PTHRESH;
-		rxdctl |= IGB_RX_HTHRESH << 8;
-		rxdctl |= IGB_RX_WTHRESH << 16;
-		wr32(E1000_RXDCTL(j), rxdctl);
-	}
-
-	if (adapter->num_rx_queues > 1) {
-		u32 random[10];
-		u32 mrqc;
-		u32 j, shift;
-		union e1000_reta {
-			u32 dword;
-			u8  bytes[4];
-		} reta;
-
-		get_random_bytes(&random[0], 40);
-
-		if (hw->mac.type >= e1000_82576)
-			shift = 0;
-		else
-			shift = 6;
-		for (j = 0; j < (32 * 4); j++) {
-			reta.bytes[j & 3] =
-				adapter->rx_ring[(j % adapter->num_rx_queues)].reg_idx << shift;
-			if ((j & 3) == 3)
-				writel(reta.dword,
-				       hw->hw_addr + E1000_RETA(0) + (j & ~3));
-		}
-		if (adapter->vfs_allocated_count)
-			mrqc = E1000_MRQC_ENABLE_VMDQ_RSS_2Q;
-		else
-			mrqc = E1000_MRQC_ENABLE_RSS_4Q;
-
-		/* Fill out hash function seeds */
-		for (j = 0; j < 10; j++)
-			array_wr32(E1000_RSSRK(0), j, random[j]);
-
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
-			 E1000_MRQC_RSS_FIELD_IPV4_TCP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6 |
-			 E1000_MRQC_RSS_FIELD_IPV6_TCP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV4_UDP |
-			 E1000_MRQC_RSS_FIELD_IPV6_UDP);
-		mrqc |= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX |
-			 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX);
-
-		wr32(E1000_MRQC, mrqc);
-	} else if (adapter->vfs_allocated_count) {
-		/* Enable multi-queue for sr-iov */
-		wr32(E1000_MRQC, E1000_MRQC_ENABLE_VMDQ);
-	}
-
-	/* Enable Receive Checksum Offload for TCP and UDP */
-	rxcsum = rd32(E1000_RXCSUM);
-	/* Disable raw packet checksumming */
-	rxcsum |= E1000_RXCSUM_PCSD;
-
-	if (adapter->hw.mac.type == e1000_82576)
-		/* Enable Receive Checksum Offload for SCTP */
-		rxcsum |= E1000_RXCSUM_CRCOFL;
-
-	/* Don't need to set TUOFL or IPOFL, they default to 1 */
-	wr32(E1000_RXCSUM, rxcsum);
-
-	/* Set the default pool for the PF's first queue */
-	igb_configure_vt_default_pool(adapter);
-
-	igb_rlpml_set(adapter);
-
-	/* Enable Receives */
-	wr32(E1000_RCTL, rctl);
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		igb_configure_rx_ring(adapter, &adapter->rx_ring[i]);
 }
 
 /**
@@ -2312,14 +2479,17 @@
  **/
 void igb_free_tx_resources(struct igb_ring *tx_ring)
 {
-	struct pci_dev *pdev = tx_ring->adapter->pdev;
-
 	igb_clean_tx_ring(tx_ring);
 
 	vfree(tx_ring->buffer_info);
 	tx_ring->buffer_info = NULL;
 
-	pci_free_consistent(pdev, tx_ring->size, tx_ring->desc, tx_ring->dma);
+	/* if not set, then don't free */
+	if (!tx_ring->desc)
+		return;
+
+	pci_free_consistent(tx_ring->pdev, tx_ring->size,
+	                    tx_ring->desc, tx_ring->dma);
 
 	tx_ring->desc = NULL;
 }
@@ -2338,12 +2508,13 @@
 		igb_free_tx_resources(&adapter->tx_ring[i]);
 }
 
-static void igb_unmap_and_free_tx_resource(struct igb_adapter *adapter,
-					   struct igb_buffer *buffer_info)
+void igb_unmap_and_free_tx_resource(struct igb_ring *tx_ring,
+				    struct igb_buffer *buffer_info)
 {
 	buffer_info->dma = 0;
 	if (buffer_info->skb) {
-		skb_dma_unmap(&adapter->pdev->dev, buffer_info->skb,
+		skb_dma_unmap(&tx_ring->pdev->dev,
+		              buffer_info->skb,
 		              DMA_TO_DEVICE);
 		dev_kfree_skb_any(buffer_info->skb);
 		buffer_info->skb = NULL;
@@ -2358,7 +2529,6 @@
  **/
 static void igb_clean_tx_ring(struct igb_ring *tx_ring)
 {
-	struct igb_adapter *adapter = tx_ring->adapter;
 	struct igb_buffer *buffer_info;
 	unsigned long size;
 	unsigned int i;
@@ -2369,21 +2539,17 @@
 
 	for (i = 0; i < tx_ring->count; i++) {
 		buffer_info = &tx_ring->buffer_info[i];
-		igb_unmap_and_free_tx_resource(adapter, buffer_info);
+		igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
 	}
 
 	size = sizeof(struct igb_buffer) * tx_ring->count;
 	memset(tx_ring->buffer_info, 0, size);
 
 	/* Zero out the descriptor ring */
-
 	memset(tx_ring->desc, 0, tx_ring->size);
 
 	tx_ring->next_to_use = 0;
 	tx_ring->next_to_clean = 0;
-
-	writel(0, adapter->hw.hw_addr + tx_ring->head);
-	writel(0, adapter->hw.hw_addr + tx_ring->tail);
 }
 
 /**
@@ -2406,14 +2572,17 @@
  **/
 void igb_free_rx_resources(struct igb_ring *rx_ring)
 {
-	struct pci_dev *pdev = rx_ring->adapter->pdev;
-
 	igb_clean_rx_ring(rx_ring);
 
 	vfree(rx_ring->buffer_info);
 	rx_ring->buffer_info = NULL;
 
-	pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma);
+	/* if not set, then don't free */
+	if (!rx_ring->desc)
+		return;
+
+	pci_free_consistent(rx_ring->pdev, rx_ring->size,
+	                    rx_ring->desc, rx_ring->dma);
 
 	rx_ring->desc = NULL;
 }
@@ -2438,26 +2607,21 @@
  **/
 static void igb_clean_rx_ring(struct igb_ring *rx_ring)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
 	struct igb_buffer *buffer_info;
-	struct pci_dev *pdev = adapter->pdev;
 	unsigned long size;
 	unsigned int i;
 
 	if (!rx_ring->buffer_info)
 		return;
+
 	/* Free all the Rx ring sk_buffs */
 	for (i = 0; i < rx_ring->count; i++) {
 		buffer_info = &rx_ring->buffer_info[i];
 		if (buffer_info->dma) {
-			if (adapter->rx_ps_hdr_size)
-				pci_unmap_single(pdev, buffer_info->dma,
-						 adapter->rx_ps_hdr_size,
-						 PCI_DMA_FROMDEVICE);
-			else
-				pci_unmap_single(pdev, buffer_info->dma,
-						 adapter->rx_buffer_len,
-						 PCI_DMA_FROMDEVICE);
+			pci_unmap_single(rx_ring->pdev,
+			                 buffer_info->dma,
+					 rx_ring->rx_buffer_len,
+					 PCI_DMA_FROMDEVICE);
 			buffer_info->dma = 0;
 		}
 
@@ -2465,14 +2629,16 @@
 			dev_kfree_skb(buffer_info->skb);
 			buffer_info->skb = NULL;
 		}
+		if (buffer_info->page_dma) {
+			pci_unmap_page(rx_ring->pdev,
+			               buffer_info->page_dma,
+				       PAGE_SIZE / 2,
+				       PCI_DMA_FROMDEVICE);
+			buffer_info->page_dma = 0;
+		}
 		if (buffer_info->page) {
-			if (buffer_info->page_dma)
-				pci_unmap_page(pdev, buffer_info->page_dma,
-					       PAGE_SIZE / 2,
-					       PCI_DMA_FROMDEVICE);
 			put_page(buffer_info->page);
 			buffer_info->page = NULL;
-			buffer_info->page_dma = 0;
 			buffer_info->page_offset = 0;
 		}
 	}
@@ -2485,9 +2651,6 @@
 
 	rx_ring->next_to_clean = 0;
 	rx_ring->next_to_use = 0;
-
-	writel(0, adapter->hw.hw_addr + rx_ring->head);
-	writel(0, adapter->hw.hw_addr + rx_ring->tail);
 }
 
 /**
@@ -2521,13 +2684,103 @@
 	memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
 	memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len);
 
-	igb_rar_set(hw, hw->mac.addr, 0);
-	igb_set_rah_pool(hw, adapter->vfs_allocated_count, 0);
+	/* set the correct pool for the new PF MAC address in entry 0 */
+	igb_rar_set_qsel(adapter, hw->mac.addr, 0,
+	                 adapter->vfs_allocated_count);
 
 	return 0;
 }
 
 /**
+ * igb_write_mc_addr_list - write multicast addresses to MTA
+ * @netdev: network interface device structure
+ *
+ * Writes multicast address list to the MTA hash table.
+ * Returns: -ENOMEM on failure
+ *                0 on no addresses written
+ *                X on writing X addresses to MTA
+ **/
+static int igb_write_mc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	struct dev_mc_list *mc_ptr = netdev->mc_list;
+	u8  *mta_list;
+	u32 vmolr = 0;
+	int i;
+
+	if (!netdev->mc_count) {
+		/* nothing to program, so clear mc list */
+		igb_update_mc_addr_list(hw, NULL, 0);
+		igb_restore_vf_multicasts(adapter);
+		return 0;
+	}
+
+	mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
+	if (!mta_list)
+		return -ENOMEM;
+
+	/* set vmolr receive overflow multicast bit */
+	vmolr |= E1000_VMOLR_ROMPE;
+
+	/* The shared function expects a packed array of only addresses. */
+	mc_ptr = netdev->mc_list;
+
+	for (i = 0; i < netdev->mc_count; i++) {
+		if (!mc_ptr)
+			break;
+		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
+		mc_ptr = mc_ptr->next;
+	}
+	igb_update_mc_addr_list(hw, mta_list, i);
+	kfree(mta_list);
+
+	return netdev->mc_count;
+}
+
+/**
+ * igb_write_uc_addr_list - write unicast addresses to RAR table
+ * @netdev: network interface device structure
+ *
+ * Writes unicast address list to the RAR table.
+ * Returns: -ENOMEM on failure/insufficient address space
+ *                0 on no addresses written
+ *                X on writing X addresses to the RAR table
+ **/
+static int igb_write_uc_addr_list(struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct e1000_hw *hw = &adapter->hw;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	unsigned int rar_entries = hw->mac.rar_entry_count - (vfn + 1);
+	int count = 0;
+
+	/* return ENOMEM indicating insufficient memory for addresses */
+	if (netdev->uc.count > rar_entries)
+		return -ENOMEM;
+
+	if (netdev->uc.count && rar_entries) {
+		struct netdev_hw_addr *ha;
+		list_for_each_entry(ha, &netdev->uc.list, list) {
+			if (!rar_entries)
+				break;
+			igb_rar_set_qsel(adapter, ha->addr,
+			                 rar_entries--,
+			                 vfn);
+			count++;
+		}
+	}
+	/* write the addresses in reverse order to avoid write combining */
+	for (; rar_entries > 0 ; rar_entries--) {
+		wr32(E1000_RAH(rar_entries), 0);
+		wr32(E1000_RAL(rar_entries), 0);
+	}
+	wrfl();
+
+	return count;
+}
+
+/**
  * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
  * @netdev: network interface device structure
  *
@@ -2540,74 +2793,63 @@
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
-	unsigned int rar_entries = hw->mac.rar_entry_count -
-	                           (adapter->vfs_allocated_count + 1);
-	struct dev_mc_list *mc_ptr = netdev->mc_list;
-	u8  *mta_list = NULL;
-	u32 rctl;
-	int i;
+	unsigned int vfn = adapter->vfs_allocated_count;
+	u32 rctl, vmolr = 0;
+	int count;
 
 	/* Check for Promiscuous and All Multicast modes */
 	rctl = rd32(E1000_RCTL);
 
+	/* clear the effected bits */
+	rctl &= ~(E1000_RCTL_UPE | E1000_RCTL_MPE | E1000_RCTL_VFE);
+
 	if (netdev->flags & IFF_PROMISC) {
 		rctl |= (E1000_RCTL_UPE | E1000_RCTL_MPE);
-		rctl &= ~E1000_RCTL_VFE;
+		vmolr |= (E1000_VMOLR_ROPE | E1000_VMOLR_MPME);
 	} else {
-		if (netdev->flags & IFF_ALLMULTI)
+		if (netdev->flags & IFF_ALLMULTI) {
 			rctl |= E1000_RCTL_MPE;
-		else
-			rctl &= ~E1000_RCTL_MPE;
-
-		if (netdev->uc.count > rar_entries)
+			vmolr |= E1000_VMOLR_MPME;
+		} else {
+			/*
+			 * Write addresses to the MTA, if the attempt fails
+			 * then we should just turn on promiscous mode so
+			 * that we can at least receive multicast traffic
+			 */
+			count = igb_write_mc_addr_list(netdev);
+			if (count < 0) {
+				rctl |= E1000_RCTL_MPE;
+				vmolr |= E1000_VMOLR_MPME;
+			} else if (count) {
+				vmolr |= E1000_VMOLR_ROMPE;
+			}
+		}
+		/*
+		 * Write addresses to available RAR registers, if there is not
+		 * sufficient space to store all the addresses then enable
+		 * unicast promiscous mode
+		 */
+		count = igb_write_uc_addr_list(netdev);
+		if (count < 0) {
 			rctl |= E1000_RCTL_UPE;
-		else
-			rctl &= ~E1000_RCTL_UPE;
+			vmolr |= E1000_VMOLR_ROPE;
+		}
 		rctl |= E1000_RCTL_VFE;
 	}
 	wr32(E1000_RCTL, rctl);
 
-	if (netdev->uc.count && rar_entries) {
-		struct netdev_hw_addr *ha;
-		list_for_each_entry(ha, &netdev->uc.list, list) {
-			if (!rar_entries)
-				break;
-			igb_rar_set(hw, ha->addr, rar_entries);
-			igb_set_rah_pool(hw, adapter->vfs_allocated_count,
-			                 rar_entries);
-			rar_entries--;
-		}
-	}
-	/* write the addresses in reverse order to avoid write combining */
-	for (; rar_entries > 0 ; rar_entries--) {
-		wr32(E1000_RAH(rar_entries), 0);
-		wr32(E1000_RAL(rar_entries), 0);
-	}
-	wrfl();
-
-	if (!netdev->mc_count) {
-		/* nothing to program, so clear mc list */
-		igb_update_mc_addr_list(hw, NULL, 0);
-		igb_restore_vf_multicasts(adapter);
+	/*
+	 * In order to support SR-IOV and eventually VMDq it is necessary to set
+	 * the VMOLR to enable the appropriate modes.  Without this workaround
+	 * we will have issues with VLAN tag stripping not being done for frames
+	 * that are only arriving because we are the default pool
+	 */
+	if (hw->mac.type < e1000_82576)
 		return;
-	}
 
-	mta_list = kzalloc(netdev->mc_count * 6, GFP_ATOMIC);
-	if (!mta_list) {
-		dev_err(&adapter->pdev->dev,
-		        "failed to allocate multicast filter list\n");
-		return;
-	}
-
-	/* The shared function expects a packed array of only addresses. */
-	for (i = 0; i < netdev->mc_count; i++) {
-		if (!mc_ptr)
-			break;
-		memcpy(mta_list + (i*ETH_ALEN), mc_ptr->dmi_addr, ETH_ALEN);
-		mc_ptr = mc_ptr->next;
-	}
-	igb_update_mc_addr_list(hw, mta_list, i);
-	kfree(mta_list);
+	vmolr |= rd32(E1000_VMOLR(vfn)) &
+	         ~(E1000_VMOLR_ROPE | E1000_VMOLR_MPME | E1000_VMOLR_ROMPE);
+	wr32(E1000_VMOLR(vfn), vmolr);
 	igb_restore_vf_multicasts(adapter);
 }
 
@@ -2669,37 +2911,34 @@
 static void igb_watchdog_task(struct work_struct *work)
 {
 	struct igb_adapter *adapter = container_of(work,
-					struct igb_adapter, watchdog_task);
+	                                           struct igb_adapter,
+                                                   watchdog_task);
 	struct e1000_hw *hw = &adapter->hw;
 	struct net_device *netdev = adapter->netdev;
 	struct igb_ring *tx_ring = adapter->tx_ring;
 	u32 link;
-	u32 eics = 0;
 	int i;
 
 	link = igb_has_link(adapter);
-	if ((netif_carrier_ok(netdev)) && link)
-		goto link_up;
-
 	if (link) {
 		if (!netif_carrier_ok(netdev)) {
 			u32 ctrl;
-			hw->mac.ops.get_speed_and_duplex(&adapter->hw,
-						   &adapter->link_speed,
-						   &adapter->link_duplex);
+			hw->mac.ops.get_speed_and_duplex(hw,
+			                                 &adapter->link_speed,
+			                                 &adapter->link_duplex);
 
 			ctrl = rd32(E1000_CTRL);
 			/* Links status message must follow this format */
 			printk(KERN_INFO "igb: %s NIC Link is Up %d Mbps %s, "
 				 "Flow Control: %s\n",
-			         netdev->name,
-				 adapter->link_speed,
-				 adapter->link_duplex == FULL_DUPLEX ?
+			       netdev->name,
+			       adapter->link_speed,
+			       adapter->link_duplex == FULL_DUPLEX ?
 				 "Full Duplex" : "Half Duplex",
-				 ((ctrl & E1000_CTRL_TFCE) && (ctrl &
-				 E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
-				 E1000_CTRL_RFCE) ? "RX" : ((ctrl &
-				 E1000_CTRL_TFCE) ? "TX" : "None")));
+			       ((ctrl & E1000_CTRL_TFCE) &&
+			        (ctrl & E1000_CTRL_RFCE)) ? "RX/TX" :
+			       ((ctrl & E1000_CTRL_RFCE) ?  "RX" :
+			       ((ctrl & E1000_CTRL_TFCE) ?  "TX" : "None")));
 
 			/* tweak tx_queue_len according to speed/duplex and
 			 * adjust the timeout factor */
@@ -2743,20 +2982,8 @@
 		}
 	}
 
-link_up:
 	igb_update_stats(adapter);
-
-	hw->mac.tx_packet_delta = adapter->stats.tpt - adapter->tpt_old;
-	adapter->tpt_old = adapter->stats.tpt;
-	hw->mac.collision_delta = adapter->stats.colc - adapter->colc_old;
-	adapter->colc_old = adapter->stats.colc;
-
-	adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
-	adapter->gorc_old = adapter->stats.gorc;
-	adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
-	adapter->gotc_old = adapter->stats.gotc;
-
-	igb_update_adaptive(&adapter->hw);
+	igb_update_adaptive(hw);
 
 	if (!netif_carrier_ok(netdev)) {
 		if (igb_desc_unused(tx_ring) + 1 < tx_ring->count) {
@@ -2771,18 +2998,22 @@
 		}
 	}
 
+	/* Force detection of hung controller every watchdog period */
+	for (i = 0; i < adapter->num_tx_queues; i++)
+		adapter->tx_ring[i].detect_tx_hung = true;
+
 	/* Cause software interrupt to ensure rx ring is cleaned */
 	if (adapter->msix_entries) {
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			eics |= adapter->rx_ring[i].eims_value;
+		u32 eics = 0;
+		for (i = 0; i < adapter->num_q_vectors; i++) {
+			struct igb_q_vector *q_vector = adapter->q_vector[i];
+			eics |= q_vector->eims_value;
+		}
 		wr32(E1000_EICS, eics);
 	} else {
 		wr32(E1000_ICS, E1000_ICS_RXDMT0);
 	}
 
-	/* Force detection of hung controller every watchdog period */
-	tx_ring->detect_tx_hung = true;
-
 	/* Reset the timer */
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		mod_timer(&adapter->watchdog_timer,
@@ -2796,7 +3027,6 @@
 	latency_invalid = 255
 };
 
-
 /**
  * igb_update_ring_itr - update the dynamic ITR value based on packet size
  *
@@ -2811,25 +3041,37 @@
  *      parameter (see igb_param.c)
  *      NOTE:  This function is called only when operating in a multiqueue
  *             receive environment.
- * @rx_ring: pointer to ring
+ * @q_vector: pointer to q_vector
  **/
-static void igb_update_ring_itr(struct igb_ring *rx_ring)
+static void igb_update_ring_itr(struct igb_q_vector *q_vector)
 {
-	int new_val = rx_ring->itr_val;
+	int new_val = q_vector->itr_val;
 	int avg_wire_size = 0;
-	struct igb_adapter *adapter = rx_ring->adapter;
-
-	if (!rx_ring->total_packets)
-		goto clear_counts; /* no packets, so don't do anything */
+	struct igb_adapter *adapter = q_vector->adapter;
 
 	/* For non-gigabit speeds, just fix the interrupt rate at 4000
 	 * ints/sec - ITR timer value of 120 ticks.
 	 */
 	if (adapter->link_speed != SPEED_1000) {
-		new_val = 120;
+		new_val = 976;
 		goto set_itr_val;
 	}
-	avg_wire_size = rx_ring->total_bytes / rx_ring->total_packets;
+
+	if (q_vector->rx_ring && q_vector->rx_ring->total_packets) {
+		struct igb_ring *ring = q_vector->rx_ring;
+		avg_wire_size = ring->total_bytes / ring->total_packets;
+	}
+
+	if (q_vector->tx_ring && q_vector->tx_ring->total_packets) {
+		struct igb_ring *ring = q_vector->tx_ring;
+		avg_wire_size = max_t(u32, avg_wire_size,
+		                      (ring->total_bytes /
+		                       ring->total_packets));
+	}
+
+	/* if avg_wire_size isn't set no work was done */
+	if (!avg_wire_size)
+		goto clear_counts;
 
 	/* Add 24 bytes to size to account for CRC, preamble, and gap */
 	avg_wire_size += 24;
@@ -2844,13 +3086,19 @@
 		new_val = avg_wire_size / 2;
 
 set_itr_val:
-	if (new_val != rx_ring->itr_val) {
-		rx_ring->itr_val = new_val;
-		rx_ring->set_itr = 1;
+	if (new_val != q_vector->itr_val) {
+		q_vector->itr_val = new_val;
+		q_vector->set_itr = 1;
 	}
 clear_counts:
-	rx_ring->total_bytes = 0;
-	rx_ring->total_packets = 0;
+	if (q_vector->rx_ring) {
+		q_vector->rx_ring->total_bytes = 0;
+		q_vector->rx_ring->total_packets = 0;
+	}
+	if (q_vector->tx_ring) {
+		q_vector->tx_ring->total_bytes = 0;
+		q_vector->tx_ring->total_packets = 0;
+	}
 }
 
 /**
@@ -2867,7 +3115,7 @@
  *      NOTE:  These calculations are only valid when operating in a single-
  *             queue environment.
  * @adapter: pointer to adapter
- * @itr_setting: current adapter->itr
+ * @itr_setting: current q_vector->itr_val
  * @packets: the number of packets during this measurement interval
  * @bytes: the number of bytes during this measurement interval
  **/
@@ -2919,8 +3167,9 @@
 
 static void igb_set_itr(struct igb_adapter *adapter)
 {
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	u16 current_itr;
-	u32 new_itr = adapter->itr;
+	u32 new_itr = q_vector->itr_val;
 
 	/* for non-gigabit speeds, just fix the interrupt rate at 4000 */
 	if (adapter->link_speed != SPEED_1000) {
@@ -2934,18 +3183,14 @@
 				    adapter->rx_ring->total_packets,
 				    adapter->rx_ring->total_bytes);
 
-	if (adapter->rx_ring->buddy) {
-		adapter->tx_itr = igb_update_itr(adapter,
-					    adapter->tx_itr,
-					    adapter->tx_ring->total_packets,
-					    adapter->tx_ring->total_bytes);
-		current_itr = max(adapter->rx_itr, adapter->tx_itr);
-	} else {
-		current_itr = adapter->rx_itr;
-	}
+	adapter->tx_itr = igb_update_itr(adapter,
+				    adapter->tx_itr,
+				    adapter->tx_ring->total_packets,
+				    adapter->tx_ring->total_bytes);
+	current_itr = max(adapter->rx_itr, adapter->tx_itr);
 
 	/* conservative mode (itr 3) eliminates the lowest_latency setting */
-	if (adapter->itr_setting == 3 && current_itr == lowest_latency)
+	if (adapter->rx_itr_setting == 3 && current_itr == lowest_latency)
 		current_itr = low_latency;
 
 	switch (current_itr) {
@@ -2966,18 +3211,17 @@
 set_itr_now:
 	adapter->rx_ring->total_bytes = 0;
 	adapter->rx_ring->total_packets = 0;
-	if (adapter->rx_ring->buddy) {
-		adapter->rx_ring->buddy->total_bytes = 0;
-		adapter->rx_ring->buddy->total_packets = 0;
-	}
+	adapter->tx_ring->total_bytes = 0;
+	adapter->tx_ring->total_packets = 0;
 
-	if (new_itr != adapter->itr) {
+	if (new_itr != q_vector->itr_val) {
 		/* this attempts to bias the interrupt rate towards Bulk
 		 * by adding intermediate steps when interrupt rate is
 		 * increasing */
-		new_itr = new_itr > adapter->itr ?
-			     max((new_itr * adapter->itr) /
-			         (new_itr + (adapter->itr >> 2)), new_itr) :
+		new_itr = new_itr > q_vector->itr_val ?
+		             max((new_itr * q_vector->itr_val) /
+		                 (new_itr + (q_vector->itr_val >> 2)),
+		                 new_itr) :
 			     new_itr;
 		/* Don't write the value here; it resets the adapter's
 		 * internal timer, and causes us to delay far longer than
@@ -2985,25 +3229,22 @@
 		 * value at the beginning of the next interrupt so the timing
 		 * ends up being correct.
 		 */
-		adapter->itr = new_itr;
-		adapter->rx_ring->itr_val = new_itr;
-		adapter->rx_ring->set_itr = 1;
+		q_vector->itr_val = new_itr;
+		q_vector->set_itr = 1;
 	}
 
 	return;
 }
 
-
 #define IGB_TX_FLAGS_CSUM		0x00000001
 #define IGB_TX_FLAGS_VLAN		0x00000002
 #define IGB_TX_FLAGS_TSO		0x00000004
 #define IGB_TX_FLAGS_IPV4		0x00000008
-#define IGB_TX_FLAGS_TSTAMP             0x00000010
-#define IGB_TX_FLAGS_VLAN_MASK	0xffff0000
-#define IGB_TX_FLAGS_VLAN_SHIFT	16
+#define IGB_TX_FLAGS_TSTAMP		0x00000010
+#define IGB_TX_FLAGS_VLAN_MASK		0xffff0000
+#define IGB_TX_FLAGS_VLAN_SHIFT		        16
 
-static inline int igb_tso_adv(struct igb_adapter *adapter,
-			      struct igb_ring *tx_ring,
+static inline int igb_tso_adv(struct igb_ring *tx_ring,
 			      struct sk_buff *skb, u32 tx_flags, u8 *hdr_len)
 {
 	struct e1000_adv_tx_context_desc *context_desc;
@@ -3065,8 +3306,8 @@
 	mss_l4len_idx |= (l4len << E1000_ADVTXD_L4LEN_SHIFT);
 
 	/* For 82575, context index must be unique per ring. */
-	if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
-		mss_l4len_idx |= tx_ring->queue_index << 4;
+	if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
+		mss_l4len_idx |= tx_ring->reg_idx << 4;
 
 	context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx);
 	context_desc->seqnum_seed = 0;
@@ -3083,14 +3324,14 @@
 	return true;
 }
 
-static inline bool igb_tx_csum_adv(struct igb_adapter *adapter,
-					struct igb_ring *tx_ring,
-					struct sk_buff *skb, u32 tx_flags)
+static inline bool igb_tx_csum_adv(struct igb_ring *tx_ring,
+				   struct sk_buff *skb, u32 tx_flags)
 {
 	struct e1000_adv_tx_context_desc *context_desc;
-	unsigned int i;
+	struct pci_dev *pdev = tx_ring->pdev;
 	struct igb_buffer *buffer_info;
 	u32 info = 0, tu_cmd = 0;
+	unsigned int i;
 
 	if ((skb->ip_summed == CHECKSUM_PARTIAL) ||
 	    (tx_flags & IGB_TX_FLAGS_VLAN)) {
@@ -3100,6 +3341,7 @@
 
 		if (tx_flags & IGB_TX_FLAGS_VLAN)
 			info |= (tx_flags & IGB_TX_FLAGS_VLAN_MASK);
+
 		info |= (skb_network_offset(skb) << E1000_ADVTXD_MACLEN_SHIFT);
 		if (skb->ip_summed == CHECKSUM_PARTIAL)
 			info |= skb_network_header_len(skb);
@@ -3137,7 +3379,7 @@
 				break;
 			default:
 				if (unlikely(net_ratelimit()))
-					dev_warn(&adapter->pdev->dev,
+					dev_warn(&pdev->dev,
 					    "partial checksum but proto=%x!\n",
 					    skb->protocol);
 				break;
@@ -3146,11 +3388,9 @@
 
 		context_desc->type_tucmd_mlhl = cpu_to_le32(tu_cmd);
 		context_desc->seqnum_seed = 0;
-		if (adapter->flags & IGB_FLAG_NEED_CTX_IDX)
+		if (tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX)
 			context_desc->mss_l4len_idx =
-				cpu_to_le32(tx_ring->queue_index << 4);
-		else
-			context_desc->mss_l4len_idx = 0;
+				cpu_to_le32(tx_ring->reg_idx << 4);
 
 		buffer_info->time_stamp = jiffies;
 		buffer_info->next_to_watch = i;
@@ -3169,11 +3409,11 @@
 #define IGB_MAX_TXD_PWR	16
 #define IGB_MAX_DATA_PER_TXD	(1<<IGB_MAX_TXD_PWR)
 
-static inline int igb_tx_map_adv(struct igb_adapter *adapter,
-				 struct igb_ring *tx_ring, struct sk_buff *skb,
+static inline int igb_tx_map_adv(struct igb_ring *tx_ring, struct sk_buff *skb,
 				 unsigned int first)
 {
 	struct igb_buffer *buffer_info;
+	struct pci_dev *pdev = tx_ring->pdev;
 	unsigned int len = skb_headlen(skb);
 	unsigned int count = 0, i;
 	unsigned int f;
@@ -3181,8 +3421,8 @@
 
 	i = tx_ring->next_to_use;
 
-	if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
-		dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+	if (skb_dma_map(&pdev->dev, skb, DMA_TO_DEVICE)) {
+		dev_err(&pdev->dev, "TX DMA map failed\n");
 		return 0;
 	}
 
@@ -3218,18 +3458,17 @@
 	tx_ring->buffer_info[i].skb = skb;
 	tx_ring->buffer_info[first].next_to_watch = i;
 
-	return count + 1;
+	return ++count;
 }
 
-static inline void igb_tx_queue_adv(struct igb_adapter *adapter,
-				    struct igb_ring *tx_ring,
+static inline void igb_tx_queue_adv(struct igb_ring *tx_ring,
 				    int tx_flags, int count, u32 paylen,
 				    u8 hdr_len)
 {
-	union e1000_adv_tx_desc *tx_desc = NULL;
+	union e1000_adv_tx_desc *tx_desc;
 	struct igb_buffer *buffer_info;
 	u32 olinfo_status = 0, cmd_type_len;
-	unsigned int i;
+	unsigned int i = tx_ring->next_to_use;
 
 	cmd_type_len = (E1000_ADVTXD_DTYP_DATA | E1000_ADVTXD_DCMD_IFCS |
 			E1000_ADVTXD_DCMD_DEXT);
@@ -3254,27 +3493,28 @@
 		olinfo_status |= E1000_TXD_POPTS_TXSM << 8;
 	}
 
-	if ((adapter->flags & IGB_FLAG_NEED_CTX_IDX) &&
-	    (tx_flags & (IGB_TX_FLAGS_CSUM | IGB_TX_FLAGS_TSO |
+	if ((tx_ring->flags & IGB_RING_FLAG_TX_CTX_IDX) &&
+	    (tx_flags & (IGB_TX_FLAGS_CSUM |
+	                 IGB_TX_FLAGS_TSO |
 			 IGB_TX_FLAGS_VLAN)))
-		olinfo_status |= tx_ring->queue_index << 4;
+		olinfo_status |= tx_ring->reg_idx << 4;
 
 	olinfo_status |= ((paylen - hdr_len) << E1000_ADVTXD_PAYLEN_SHIFT);
 
-	i = tx_ring->next_to_use;
-	while (count--) {
+	do {
 		buffer_info = &tx_ring->buffer_info[i];
 		tx_desc = E1000_TX_DESC_ADV(*tx_ring, i);
 		tx_desc->read.buffer_addr = cpu_to_le64(buffer_info->dma);
 		tx_desc->read.cmd_type_len =
 			cpu_to_le32(cmd_type_len | buffer_info->length);
 		tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status);
+		count--;
 		i++;
 		if (i == tx_ring->count)
 			i = 0;
-	}
+	} while (count > 0);
 
-	tx_desc->read.cmd_type_len |= cpu_to_le32(adapter->txd_cmd);
+	tx_desc->read.cmd_type_len |= cpu_to_le32(IGB_ADVTXD_DCMD);
 	/* Force memory writes to complete before letting h/w
 	 * know there are new descriptors to fetch.  (Only
 	 * applicable for weak-ordered memory model archs,
@@ -3282,16 +3522,15 @@
 	wmb();
 
 	tx_ring->next_to_use = i;
-	writel(i, adapter->hw.hw_addr + tx_ring->tail);
+	writel(i, tx_ring->tail);
 	/* we need this if more than one processor can write to our tail
 	 * at a time, it syncronizes IO on IA64/Altix systems */
 	mmiowb();
 }
 
-static int __igb_maybe_stop_tx(struct net_device *netdev,
-			       struct igb_ring *tx_ring, int size)
+static int __igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct net_device *netdev = tx_ring->netdev;
 
 	netif_stop_subqueue(netdev, tx_ring->queue_index);
 
@@ -3307,29 +3546,92 @@
 
 	/* A reprieve! */
 	netif_wake_subqueue(netdev, tx_ring->queue_index);
-	++adapter->restart_queue;
+	tx_ring->tx_stats.restart_queue++;
 	return 0;
 }
 
-static int igb_maybe_stop_tx(struct net_device *netdev,
-			     struct igb_ring *tx_ring, int size)
+static int igb_maybe_stop_tx(struct igb_ring *tx_ring, int size)
 {
 	if (igb_desc_unused(tx_ring) >= size)
 		return 0;
-	return __igb_maybe_stop_tx(netdev, tx_ring, size);
+	return __igb_maybe_stop_tx(tx_ring, size);
 }
 
-static netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
-					   struct net_device *netdev,
-					   struct igb_ring *tx_ring)
+netdev_tx_t igb_xmit_frame_ring_adv(struct sk_buff *skb,
+				    struct igb_ring *tx_ring)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = netdev_priv(tx_ring->netdev);
 	unsigned int first;
 	unsigned int tx_flags = 0;
 	u8 hdr_len = 0;
-	int count = 0;
-	int tso = 0;
-	union skb_shared_tx *shtx;
+	int tso = 0, count;
+	union skb_shared_tx *shtx = skb_tx(skb);
+
+	/* need: 1 descriptor per page,
+	 *       + 2 desc gap to keep tail from touching head,
+	 *       + 1 desc for skb->data,
+	 *       + 1 desc for context descriptor,
+	 * otherwise try next time */
+	if (igb_maybe_stop_tx(tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
+		/* this is a hard error */
+		return NETDEV_TX_BUSY;
+	}
+
+	if (unlikely(shtx->hardware)) {
+		shtx->in_progress = 1;
+		tx_flags |= IGB_TX_FLAGS_TSTAMP;
+	}
+
+	if (vlan_tx_tag_present(skb) && adapter->vlgrp) {
+		tx_flags |= IGB_TX_FLAGS_VLAN;
+		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
+	}
+
+	if (skb->protocol == htons(ETH_P_IP))
+		tx_flags |= IGB_TX_FLAGS_IPV4;
+
+	first = tx_ring->next_to_use;
+	if (skb_is_gso(skb)) {
+		tso = igb_tso_adv(tx_ring, skb, tx_flags, &hdr_len);
+
+		if (tso < 0) {
+			dev_kfree_skb_any(skb);
+			return NETDEV_TX_OK;
+		}
+	}
+
+	if (tso)
+		tx_flags |= IGB_TX_FLAGS_TSO;
+	else if (igb_tx_csum_adv(tx_ring, skb, tx_flags) &&
+	         (skb->ip_summed == CHECKSUM_PARTIAL))
+		tx_flags |= IGB_TX_FLAGS_CSUM;
+
+	/*
+	 * count reflects descriptors mapped, if 0 or less then mapping error
+	 * has occured and we need to rewind the descriptor queue
+	 */
+	count = igb_tx_map_adv(tx_ring, skb, first);
+	if (count <= 0) {
+		dev_kfree_skb_any(skb);
+		tx_ring->buffer_info[first].time_stamp = 0;
+		tx_ring->next_to_use = first;
+		return NETDEV_TX_OK;
+	}
+
+	igb_tx_queue_adv(tx_ring, tx_flags, count, skb->len, hdr_len);
+
+	/* Make sure there is space in the ring for the next send. */
+	igb_maybe_stop_tx(tx_ring, MAX_SKB_FRAGS + 4);
+
+	return NETDEV_TX_OK;
+}
+
+static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
+				      struct net_device *netdev)
+{
+	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_ring *tx_ring;
+	int r_idx = 0;
 
 	if (test_bit(__IGB_DOWN, &adapter->state)) {
 		dev_kfree_skb_any(skb);
@@ -3341,81 +3643,6 @@
 		return NETDEV_TX_OK;
 	}
 
-	/* need: 1 descriptor per page,
-	 *       + 2 desc gap to keep tail from touching head,
-	 *       + 1 desc for skb->data,
-	 *       + 1 desc for context descriptor,
-	 * otherwise try next time */
-	if (igb_maybe_stop_tx(netdev, tx_ring, skb_shinfo(skb)->nr_frags + 4)) {
-		/* this is a hard error */
-		return NETDEV_TX_BUSY;
-	}
-
-	/*
-	 * TODO: check that there currently is no other packet with
-	 * time stamping in the queue
-	 *
-	 * When doing time stamping, keep the connection to the socket
-	 * a while longer: it is still needed by skb_hwtstamp_tx(),
-	 * called either in igb_tx_hwtstamp() or by our caller when
-	 * doing software time stamping.
-	 */
-	shtx = skb_tx(skb);
-	if (unlikely(shtx->hardware)) {
-		shtx->in_progress = 1;
-		tx_flags |= IGB_TX_FLAGS_TSTAMP;
-	}
-
-	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
-		tx_flags |= IGB_TX_FLAGS_VLAN;
-		tx_flags |= (vlan_tx_tag_get(skb) << IGB_TX_FLAGS_VLAN_SHIFT);
-	}
-
-	if (skb->protocol == htons(ETH_P_IP))
-		tx_flags |= IGB_TX_FLAGS_IPV4;
-
-	first = tx_ring->next_to_use;
-	tso = skb_is_gso(skb) ? igb_tso_adv(adapter, tx_ring, skb, tx_flags,
-					      &hdr_len) : 0;
-
-	if (tso < 0) {
-		dev_kfree_skb_any(skb);
-		return NETDEV_TX_OK;
-	}
-
-	if (tso)
-		tx_flags |= IGB_TX_FLAGS_TSO;
-	else if (igb_tx_csum_adv(adapter, tx_ring, skb, tx_flags) &&
-	         (skb->ip_summed == CHECKSUM_PARTIAL))
-		tx_flags |= IGB_TX_FLAGS_CSUM;
-
-	/*
-	 * count reflects descriptors mapped, if 0 then mapping error
-	 * has occured and we need to rewind the descriptor queue
-	 */
-	count = igb_tx_map_adv(adapter, tx_ring, skb, first);
-
-	if (count) {
-		igb_tx_queue_adv(adapter, tx_ring, tx_flags, count,
-			         skb->len, hdr_len);
-		/* Make sure there is space in the ring for the next send. */
-		igb_maybe_stop_tx(netdev, tx_ring, MAX_SKB_FRAGS + 4);
-	} else {
-		dev_kfree_skb_any(skb);
-		tx_ring->buffer_info[first].time_stamp = 0;
-		tx_ring->next_to_use = first;
-	}
-
-	return NETDEV_TX_OK;
-}
-
-static netdev_tx_t igb_xmit_frame_adv(struct sk_buff *skb,
-				      struct net_device *netdev)
-{
-	struct igb_adapter *adapter = netdev_priv(netdev);
-	struct igb_ring *tx_ring;
-
-	int r_idx = 0;
 	r_idx = skb->queue_mapping & (IGB_ABS_MAX_TX_QUEUES - 1);
 	tx_ring = adapter->multi_tx_table[r_idx];
 
@@ -3423,7 +3650,7 @@
 	 * to a flow.  Right now, performance is impacted slightly negatively
 	 * if using multiple tx queues.  If the stack breaks away from a
 	 * single qdisc implementation, we can look at this again. */
-	return igb_xmit_frame_ring_adv(skb, netdev, tx_ring);
+	return igb_xmit_frame_ring_adv(skb, tx_ring);
 }
 
 /**
@@ -3437,6 +3664,7 @@
 
 	/* Do the reset outside of interrupt context */
 	adapter->tx_timeout_count++;
+
 	schedule_work(&adapter->reset_task);
 	wr32(E1000_EICS,
 	     (adapter->eims_enable_mask & ~adapter->eims_other));
@@ -3459,10 +3687,8 @@
  **/
 static struct net_device_stats *igb_get_stats(struct net_device *netdev)
 {
-	struct igb_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -3475,16 +3701,17 @@
 static int igb_change_mtu(struct net_device *netdev, int new_mtu)
 {
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
 	int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
+	u32 rx_buffer_len, i;
 
-	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
-	    (max_frame > MAX_JUMBO_FRAME_SIZE)) {
-		dev_err(&adapter->pdev->dev, "Invalid MTU setting\n");
+	if ((new_mtu < 68) || (max_frame > MAX_JUMBO_FRAME_SIZE)) {
+		dev_err(&pdev->dev, "Invalid MTU setting\n");
 		return -EINVAL;
 	}
 
 	if (max_frame > MAX_STD_JUMBO_FRAME_SIZE) {
-		dev_err(&adapter->pdev->dev, "MTU > 9216 not supported.\n");
+		dev_err(&pdev->dev, "MTU > 9216 not supported.\n");
 		return -EINVAL;
 	}
 
@@ -3493,8 +3720,6 @@
 
 	/* igb_down has a dependency on max_frame_size */
 	adapter->max_frame_size = max_frame;
-	if (netif_running(netdev))
-		igb_down(adapter);
 
 	/* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
 	 * means we reserve 2 more, this pushes us to allocate from the next
@@ -3502,35 +3727,23 @@
 	 * i.e. RXBUFFER_2048 --> size-4096 slab
 	 */
 
-	if (max_frame <= IGB_RXBUFFER_256)
-		adapter->rx_buffer_len = IGB_RXBUFFER_256;
-	else if (max_frame <= IGB_RXBUFFER_512)
-		adapter->rx_buffer_len = IGB_RXBUFFER_512;
-	else if (max_frame <= IGB_RXBUFFER_1024)
-		adapter->rx_buffer_len = IGB_RXBUFFER_1024;
-	else if (max_frame <= IGB_RXBUFFER_2048)
-		adapter->rx_buffer_len = IGB_RXBUFFER_2048;
+	if (max_frame <= IGB_RXBUFFER_1024)
+		rx_buffer_len = IGB_RXBUFFER_1024;
+	else if (max_frame <= MAXIMUM_ETHERNET_VLAN_SIZE)
+		rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
 	else
-#if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
-		adapter->rx_buffer_len = IGB_RXBUFFER_16384;
-#else
-		adapter->rx_buffer_len = PAGE_SIZE / 2;
-#endif
+		rx_buffer_len = IGB_RXBUFFER_128;
 
-	/* if sr-iov is enabled we need to force buffer size to 1K or larger */
-	if (adapter->vfs_allocated_count &&
-	    (adapter->rx_buffer_len < IGB_RXBUFFER_1024))
-		adapter->rx_buffer_len = IGB_RXBUFFER_1024;
+	if (netif_running(netdev))
+		igb_down(adapter);
 
-	/* adjust allocation if LPE protects us, and we aren't using SBP */
-	if ((max_frame == ETH_FRAME_LEN + ETH_FCS_LEN) ||
-	     (max_frame == MAXIMUM_ETHERNET_VLAN_SIZE))
-		adapter->rx_buffer_len = MAXIMUM_ETHERNET_VLAN_SIZE;
-
-	dev_info(&adapter->pdev->dev, "changing MTU from %d to %d\n",
+	dev_info(&pdev->dev, "changing MTU from %d to %d\n",
 		 netdev->mtu, new_mtu);
 	netdev->mtu = new_mtu;
 
+	for (i = 0; i < adapter->num_rx_queues; i++)
+		adapter->rx_ring[i].rx_buffer_len = rx_buffer_len;
+
 	if (netif_running(netdev))
 		igb_up(adapter);
 	else
@@ -3548,9 +3761,13 @@
 
 void igb_update_stats(struct igb_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct pci_dev *pdev = adapter->pdev;
+	u32 rnbc;
 	u16 phy_tmp;
+	int i;
+	u64 bytes, packets;
 
 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
 
@@ -3563,6 +3780,29 @@
 	if (pci_channel_offline(pdev))
 		return;
 
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_rx_queues; i++) {
+		u32 rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0x0FFF;
+		adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
+		netdev->stats.rx_fifo_errors += rqdpc_tmp;
+		bytes += adapter->rx_ring[i].rx_stats.bytes;
+		packets += adapter->rx_ring[i].rx_stats.packets;
+	}
+
+	netdev->stats.rx_bytes = bytes;
+	netdev->stats.rx_packets = packets;
+
+	bytes = 0;
+	packets = 0;
+	for (i = 0; i < adapter->num_tx_queues; i++) {
+		bytes += adapter->tx_ring[i].tx_stats.bytes;
+		packets += adapter->tx_ring[i].tx_stats.packets;
+	}
+	netdev->stats.tx_bytes = bytes;
+	netdev->stats.tx_packets = packets;
+
+	/* read stats registers */
 	adapter->stats.crcerrs += rd32(E1000_CRCERRS);
 	adapter->stats.gprc += rd32(E1000_GPRC);
 	adapter->stats.gorc += rd32(E1000_GORCL);
@@ -3595,7 +3835,9 @@
 	adapter->stats.gptc += rd32(E1000_GPTC);
 	adapter->stats.gotc += rd32(E1000_GOTCL);
 	rd32(E1000_GOTCH); /* clear GOTCL */
-	adapter->stats.rnbc += rd32(E1000_RNBC);
+	rnbc = rd32(E1000_RNBC);
+	adapter->stats.rnbc += rnbc;
+	netdev->stats.rx_fifo_errors += rnbc;
 	adapter->stats.ruc += rd32(E1000_RUC);
 	adapter->stats.rfc += rd32(E1000_RFC);
 	adapter->stats.rjc += rd32(E1000_RJC);
@@ -3614,7 +3856,6 @@
 	adapter->stats.bptc += rd32(E1000_BPTC);
 
 	/* used for adaptive IFS */
-
 	hw->mac.tx_packet_delta = rd32(E1000_TPT);
 	adapter->stats.tpt += hw->mac.tx_packet_delta;
 	hw->mac.collision_delta = rd32(E1000_COLC);
@@ -3637,56 +3878,29 @@
 	adapter->stats.icrxdmtc += rd32(E1000_ICRXDMTC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
-	adapter->net_stats.collisions = adapter->stats.colc;
+	netdev->stats.multicast = adapter->stats.mprc;
+	netdev->stats.collisions = adapter->stats.colc;
 
 	/* Rx Errors */
 
-	if (hw->mac.type != e1000_82575) {
-		u32 rqdpc_tmp;
-		u64 rqdpc_total = 0;
-		int i;
-		/* Read out drops stats per RX queue.  Notice RQDPC (Receive
-		 * Queue Drop Packet Count) stats only gets incremented, if
-		 * the DROP_EN but it set (in the SRRCTL register for that
-		 * queue).  If DROP_EN bit is NOT set, then the some what
-		 * equivalent count is stored in RNBC (not per queue basis).
-		 * Also note the drop count is due to lack of available
-		 * descriptors.
-		 */
-		for (i = 0; i < adapter->num_rx_queues; i++) {
-			rqdpc_tmp = rd32(E1000_RQDPC(i)) & 0xFFF;
-			adapter->rx_ring[i].rx_stats.drops += rqdpc_tmp;
-			rqdpc_total += adapter->rx_ring[i].rx_stats.drops;
-		}
-		adapter->net_stats.rx_fifo_errors = rqdpc_total;
-	}
-
-	/* Note RNBC (Receive No Buffers Count) is an not an exact
-	 * drop count as the hardware FIFO might save the day.  Thats
-	 * one of the reason for saving it in rx_fifo_errors, as its
-	 * potentially not a true drop.
-	 */
-	adapter->net_stats.rx_fifo_errors += adapter->stats.rnbc;
-
 	/* RLEC on some newer hardware can be incorrect so build
 	 * our own version based on RUC and ROC */
-	adapter->net_stats.rx_errors = adapter->stats.rxerrc +
+	netdev->stats.rx_errors = adapter->stats.rxerrc +
 		adapter->stats.crcerrs + adapter->stats.algnerrc +
 		adapter->stats.ruc + adapter->stats.roc +
 		adapter->stats.cexterr;
-	adapter->net_stats.rx_length_errors = adapter->stats.ruc +
+	netdev->stats.rx_length_errors = adapter->stats.ruc +
 					      adapter->stats.roc;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_frame_errors = adapter->stats.algnerrc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
 
 	/* Tx Errors */
-	adapter->net_stats.tx_errors = adapter->stats.ecol +
+	netdev->stats.tx_errors = adapter->stats.ecol +
 				       adapter->stats.latecol;
-	adapter->net_stats.tx_aborted_errors = adapter->stats.ecol;
-	adapter->net_stats.tx_window_errors = adapter->stats.latecol;
-	adapter->net_stats.tx_carrier_errors = adapter->stats.tncrs;
+	netdev->stats.tx_aborted_errors = adapter->stats.ecol;
+	netdev->stats.tx_window_errors = adapter->stats.latecol;
+	netdev->stats.tx_carrier_errors = adapter->stats.tncrs;
 
 	/* Tx Dropped needs to be maintained elsewhere */
 
@@ -3707,14 +3921,12 @@
 
 static irqreturn_t igb_msix_other(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
 	struct e1000_hw *hw = &adapter->hw;
 	u32 icr = rd32(E1000_ICR);
-
 	/* reading ICR causes bit 31 of EICR to be cleared */
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -3730,125 +3942,90 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC | E1000_IMS_VMMB);
+	if (adapter->vfs_allocated_count)
+		wr32(E1000_IMS, E1000_IMS_LSC |
+				E1000_IMS_VMMB |
+				E1000_IMS_DOUTSYNC);
+	else
+		wr32(E1000_IMS, E1000_IMS_LSC | E1000_IMS_DOUTSYNC);
 	wr32(E1000_EIMS, adapter->eims_other);
 
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t igb_msix_tx(int irq, void *data)
+static void igb_write_itr(struct igb_q_vector *q_vector)
 {
-	struct igb_ring *tx_ring = data;
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct e1000_hw *hw = &adapter->hw;
+	u32 itr_val = q_vector->itr_val & 0x7FFC;
 
-#ifdef CONFIG_IGB_DCA
-	if (adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_tx_dca(tx_ring);
-#endif
+	if (!q_vector->set_itr)
+		return;
 
-	tx_ring->total_bytes = 0;
-	tx_ring->total_packets = 0;
+	if (!itr_val)
+		itr_val = 0x4;
 
-	/* auto mask will automatically reenable the interrupt when we write
-	 * EICS */
-	if (!igb_clean_tx_irq(tx_ring))
-		/* Ring was not completely cleaned, so fire another interrupt */
-		wr32(E1000_EICS, tx_ring->eims_value);
+	if (q_vector->itr_shift)
+		itr_val |= itr_val << q_vector->itr_shift;
 	else
-		wr32(E1000_EIMS, tx_ring->eims_value);
+		itr_val |= 0x8000000;
+
+	writel(itr_val, q_vector->itr_register);
+	q_vector->set_itr = 0;
+}
+
+static irqreturn_t igb_msix_ring(int irq, void *data)
+{
+	struct igb_q_vector *q_vector = data;
+
+	/* Write the ITR value calculated from the previous interrupt. */
+	igb_write_itr(q_vector);
+
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
 
-static void igb_write_itr(struct igb_ring *ring)
-{
-	struct e1000_hw *hw = &ring->adapter->hw;
-	if ((ring->adapter->itr_setting & 3) && ring->set_itr) {
-		switch (hw->mac.type) {
-		case e1000_82576:
-			wr32(ring->itr_register, ring->itr_val |
-			     0x80000000);
-			break;
-		default:
-			wr32(ring->itr_register, ring->itr_val |
-			     (ring->itr_val << 16));
-			break;
-		}
-		ring->set_itr = 0;
-	}
-}
-
-static irqreturn_t igb_msix_rx(int irq, void *data)
-{
-	struct igb_ring *rx_ring = data;
-
-	/* Write the ITR value calculated at the end of the
-	 * previous interrupt.
-	 */
-
-	igb_write_itr(rx_ring);
-
-	if (napi_schedule_prep(&rx_ring->napi))
-		__napi_schedule(&rx_ring->napi);
-
 #ifdef CONFIG_IGB_DCA
-	if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_rx_dca(rx_ring);
-#endif
-		return IRQ_HANDLED;
-}
-
-#ifdef CONFIG_IGB_DCA
-static void igb_update_rx_dca(struct igb_ring *rx_ring)
+static void igb_update_dca(struct igb_q_vector *q_vector)
 {
-	u32 dca_rxctrl;
-	struct igb_adapter *adapter = rx_ring->adapter;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 	int cpu = get_cpu();
-	int q = rx_ring->reg_idx;
 
-	if (rx_ring->cpu != cpu) {
-		dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
-		if (hw->mac.type == e1000_82576) {
+	if (q_vector->cpu == cpu)
+		goto out_no_update;
+
+	if (q_vector->tx_ring) {
+		int q = q_vector->tx_ring->reg_idx;
+		u32 dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
+			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
+			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
+			              E1000_DCA_TXCTRL_CPUID_SHIFT;
+		}
+		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
+		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
+	}
+	if (q_vector->rx_ring) {
+		int q = q_vector->rx_ring->reg_idx;
+		u32 dca_rxctrl = rd32(E1000_DCA_RXCTRL(q));
+		if (hw->mac.type == e1000_82575) {
+			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
+			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+		} else {
 			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK_82576;
 			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
 			              E1000_DCA_RXCTRL_CPUID_SHIFT;
-		} else {
-			dca_rxctrl &= ~E1000_DCA_RXCTRL_CPUID_MASK;
-			dca_rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
 		}
 		dca_rxctrl |= E1000_DCA_RXCTRL_DESC_DCA_EN;
 		dca_rxctrl |= E1000_DCA_RXCTRL_HEAD_DCA_EN;
 		dca_rxctrl |= E1000_DCA_RXCTRL_DATA_DCA_EN;
 		wr32(E1000_DCA_RXCTRL(q), dca_rxctrl);
-		rx_ring->cpu = cpu;
 	}
-	put_cpu();
-}
-
-static void igb_update_tx_dca(struct igb_ring *tx_ring)
-{
-	u32 dca_txctrl;
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct e1000_hw *hw = &adapter->hw;
-	int cpu = get_cpu();
-	int q = tx_ring->reg_idx;
-
-	if (tx_ring->cpu != cpu) {
-		dca_txctrl = rd32(E1000_DCA_TXCTRL(q));
-		if (hw->mac.type == e1000_82576) {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK_82576;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu) <<
-			              E1000_DCA_TXCTRL_CPUID_SHIFT;
-		} else {
-			dca_txctrl &= ~E1000_DCA_TXCTRL_CPUID_MASK;
-			dca_txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
-		}
-		dca_txctrl |= E1000_DCA_TXCTRL_DESC_DCA_EN;
-		wr32(E1000_DCA_TXCTRL(q), dca_txctrl);
-		tx_ring->cpu = cpu;
-	}
+	q_vector->cpu = cpu;
+out_no_update:
 	put_cpu();
 }
 
@@ -3863,13 +4040,10 @@
 	/* Always use CB2 mode, difference is masked in the CB driver. */
 	wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		adapter->tx_ring[i].cpu = -1;
-		igb_update_tx_dca(&adapter->tx_ring[i]);
-	}
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		adapter->rx_ring[i].cpu = -1;
-		igb_update_rx_dca(&adapter->rx_ring[i]);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		q_vector->cpu = -1;
+		igb_update_dca(q_vector);
 	}
 }
 
@@ -3877,6 +4051,7 @@
 {
 	struct net_device *netdev = dev_get_drvdata(dev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned long event = *(unsigned long *)data;
 
@@ -3885,12 +4060,9 @@
 		/* if already enabled, don't do it again */
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED)
 			break;
-		/* Always use CB2 mode, difference is masked
-		 * in the CB driver. */
-		wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_CB2);
 		if (dca_add_requester(dev) == 0) {
 			adapter->flags |= IGB_FLAG_DCA_ENABLED;
-			dev_info(&adapter->pdev->dev, "DCA enabled\n");
+			dev_info(&pdev->dev, "DCA enabled\n");
 			igb_setup_dca(adapter);
 			break;
 		}
@@ -3898,9 +4070,9 @@
 	case DCA_PROVIDER_REMOVE:
 		if (adapter->flags & IGB_FLAG_DCA_ENABLED) {
 			/* without this a class_device is left
- 			 * hanging around in the sysfs model */
+			 * hanging around in the sysfs model */
 			dca_remove_requester(dev);
-			dev_info(&adapter->pdev->dev, "DCA disabled\n");
+			dev_info(&pdev->dev, "DCA disabled\n");
 			adapter->flags &= ~IGB_FLAG_DCA_ENABLED;
 			wr32(E1000_DCA_CTRL, E1000_DCA_CTRL_DCA_MODE_DISABLE);
 		}
@@ -3930,12 +4102,51 @@
 
 	for (i = 0 ; i < adapter->vfs_allocated_count; i++) {
 		ping = E1000_PF_CONTROL_MSG;
-		if (adapter->vf_data[i].clear_to_send)
+		if (adapter->vf_data[i].flags & IGB_VF_FLAG_CTS)
 			ping |= E1000_VT_MSGTYPE_CTS;
 		igb_write_mbx(hw, &ping, 1, i);
 	}
 }
 
+static int igb_set_vf_promisc(struct igb_adapter *adapter, u32 *msgbuf, u32 vf)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vmolr = rd32(E1000_VMOLR(vf));
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
+
+	vf_data->flags |= ~(IGB_VF_FLAG_UNI_PROMISC |
+	                    IGB_VF_FLAG_MULTI_PROMISC);
+	vmolr &= ~(E1000_VMOLR_ROPE | E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
+	if (*msgbuf & E1000_VF_SET_PROMISC_MULTICAST) {
+		vmolr |= E1000_VMOLR_MPME;
+		*msgbuf &= ~E1000_VF_SET_PROMISC_MULTICAST;
+	} else {
+		/*
+		 * if we have hashes and we are clearing a multicast promisc
+		 * flag we need to write the hashes to the MTA as this step
+		 * was previously skipped
+		 */
+		if (vf_data->num_vf_mc_hashes > 30) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			int j;
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+	}
+
+	wr32(E1000_VMOLR(vf), vmolr);
+
+	/* there are flags left unprocessed, likely not supported */
+	if (*msgbuf & E1000_VT_MSGINFO_MASK)
+		return -EINVAL;
+
+	return 0;
+
+}
+
 static int igb_set_vf_multicasts(struct igb_adapter *adapter,
 				  u32 *msgbuf, u32 vf)
 {
@@ -3944,18 +4155,17 @@
 	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	int i;
 
-	/* only up to 30 hash values supported */
-	if (n > 30)
-		n = 30;
-
-	/* salt away the number of multi cast addresses assigned
+	/* salt away the number of multicast addresses assigned
 	 * to this VF for later use to restore when the PF multi cast
 	 * list changes
 	 */
 	vf_data->num_vf_mc_hashes = n;
 
-	/* VFs are limited to using the MTA hash table for their multicast
-	 * addresses */
+	/* only up to 30 hash values supported */
+	if (n > 30)
+		n = 30;
+
+	/* store the hashes for later use */
 	for (i = 0; i < n; i++)
 		vf_data->vf_mc_hashes[i] = hash_list[i];
 
@@ -3972,9 +4182,20 @@
 	int i, j;
 
 	for (i = 0; i < adapter->vfs_allocated_count; i++) {
+		u32 vmolr = rd32(E1000_VMOLR(i));
+		vmolr &= ~(E1000_VMOLR_ROMPE | E1000_VMOLR_MPME);
+
 		vf_data = &adapter->vf_data[i];
-		for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
-			igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+
+		if ((vf_data->num_vf_mc_hashes > 30) ||
+		    (vf_data->flags & IGB_VF_FLAG_MULTI_PROMISC)) {
+			vmolr |= E1000_VMOLR_MPME;
+		} else if (vf_data->num_vf_mc_hashes) {
+			vmolr |= E1000_VMOLR_ROMPE;
+			for (j = 0; j < vf_data->num_vf_mc_hashes; j++)
+				igb_mta_set(hw, vf_data->vf_mc_hashes[j]);
+		}
+		wr32(E1000_VMOLR(i), vmolr);
 	}
 }
 
@@ -4012,7 +4233,11 @@
 	struct e1000_hw *hw = &adapter->hw;
 	u32 reg, i;
 
-	/* It is an error to call this function when VFs are not enabled */
+	/* The vlvf table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return -1;
+
+	/* we only need to do this if VMDq is enabled */
 	if (!adapter->vfs_allocated_count)
 		return -1;
 
@@ -4042,16 +4267,12 @@
 
 			/* if !enabled we need to set this up in vfta */
 			if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
-				/* add VID to filter table, if bit already set
-				 * PF must have added it outside of table */
-				if (igb_vfta_set(hw, vid, true))
-					reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT +
-						adapter->vfs_allocated_count);
+				/* add VID to filter table */
+				igb_vfta_set(hw, vid, true);
 				reg |= E1000_VLVF_VLANID_ENABLE;
 			}
 			reg &= ~E1000_VLVF_VLANID_MASK;
 			reg |= vid;
-
 			wr32(E1000_VLVF(i), reg);
 
 			/* do not modify RLPML for PF devices */
@@ -4067,8 +4288,8 @@
 				reg |= size;
 				wr32(E1000_VMOLR(vf), reg);
 			}
-			adapter->vf_data[vf].vlans_enabled++;
 
+			adapter->vf_data[vf].vlans_enabled++;
 			return 0;
 		}
 	} else {
@@ -4110,15 +4331,14 @@
 	return igb_vlvf_set(adapter, vid, add, vf);
 }
 
-static inline void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+static inline void igb_vf_reset(struct igb_adapter *adapter, u32 vf)
 {
-	struct e1000_hw *hw = &adapter->hw;
-
-	/* disable mailbox functionality for vf */
-	adapter->vf_data[vf].clear_to_send = false;
+	/* clear all flags */
+	adapter->vf_data[vf].flags = 0;
+	adapter->vf_data[vf].last_nack = jiffies;
 
 	/* reset offloads to defaults */
-	igb_set_vmolr(hw, vf);
+	igb_set_vmolr(adapter, vf);
 
 	/* reset vlans for device */
 	igb_clear_vf_vfta(adapter, vf);
@@ -4130,7 +4350,18 @@
 	igb_set_rx_mode(adapter->netdev);
 }
 
-static inline void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
+static void igb_vf_reset_event(struct igb_adapter *adapter, u32 vf)
+{
+	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
+
+	/* generate a new mac address as we were hotplug removed/added */
+	random_ether_addr(vf_mac);
+
+	/* process remaining reset events */
+	igb_vf_reset(adapter, vf);
+}
+
+static void igb_vf_reset_msg(struct igb_adapter *adapter, u32 vf)
 {
 	struct e1000_hw *hw = &adapter->hw;
 	unsigned char *vf_mac = adapter->vf_data[vf].vf_mac_addresses;
@@ -4139,11 +4370,10 @@
 	u8 *addr = (u8 *)(&msgbuf[1]);
 
 	/* process all the same items cleared in a function level reset */
-	igb_vf_reset_event(adapter, vf);
+	igb_vf_reset(adapter, vf);
 
 	/* set vf mac address */
-	igb_rar_set(hw, vf_mac, rar_entry);
-	igb_set_rah_pool(hw, vf, rar_entry);
+	igb_rar_set_qsel(adapter, vf_mac, rar_entry, vf);
 
 	/* enable transmit and receive for vf */
 	reg = rd32(E1000_VFTE);
@@ -4151,8 +4381,7 @@
 	reg = rd32(E1000_VFRE);
 	wr32(E1000_VFRE, reg | (1 << vf));
 
-	/* enable mailbox functionality for vf */
-	adapter->vf_data[vf].clear_to_send = true;
+	adapter->vf_data[vf].flags = IGB_VF_FLAG_CTS;
 
 	/* reply to reset with ack and vf mac address */
 	msgbuf[0] = E1000_VF_RESET | E1000_VT_MSGTYPE_ACK;
@@ -4162,66 +4391,45 @@
 
 static int igb_set_vf_mac_addr(struct igb_adapter *adapter, u32 *msg, int vf)
 {
-		unsigned char *addr = (char *)&msg[1];
-		int err = -1;
+	unsigned char *addr = (char *)&msg[1];
+	int err = -1;
 
-		if (is_valid_ether_addr(addr))
-			err = igb_set_vf_mac(adapter, vf, addr);
+	if (is_valid_ether_addr(addr))
+		err = igb_set_vf_mac(adapter, vf, addr);
 
-		return err;
-
+	return err;
 }
 
 static void igb_rcv_ack_from_vf(struct igb_adapter *adapter, u32 vf)
 {
 	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	u32 msg = E1000_VT_MSGTYPE_NACK;
 
 	/* if device isn't clear to send it shouldn't be reading either */
-	if (!adapter->vf_data[vf].clear_to_send)
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS) &&
+	    time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
 		igb_write_mbx(hw, &msg, 1, vf);
-}
-
-
-static void igb_msg_task(struct igb_adapter *adapter)
-{
-	struct e1000_hw *hw = &adapter->hw;
-	u32 vf;
-
-	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
-		/* process any reset requests */
-		if (!igb_check_for_rst(hw, vf)) {
-			adapter->vf_data[vf].clear_to_send = false;
-			igb_vf_reset_event(adapter, vf);
-		}
-
-		/* process any messages pending */
-		if (!igb_check_for_msg(hw, vf))
-			igb_rcv_msg_from_vf(adapter, vf);
-
-		/* process any acks */
-		if (!igb_check_for_ack(hw, vf))
-			igb_rcv_ack_from_vf(adapter, vf);
-
+		vf_data->last_nack = jiffies;
 	}
 }
 
-static int igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
+static void igb_rcv_msg_from_vf(struct igb_adapter *adapter, u32 vf)
 {
-	u32 mbx_size = E1000_VFMAILBOX_SIZE;
-	u32 msgbuf[mbx_size];
+	struct pci_dev *pdev = adapter->pdev;
+	u32 msgbuf[E1000_VFMAILBOX_SIZE];
 	struct e1000_hw *hw = &adapter->hw;
+	struct vf_data_storage *vf_data = &adapter->vf_data[vf];
 	s32 retval;
 
-	retval = igb_read_mbx(hw, msgbuf, mbx_size, vf);
+	retval = igb_read_mbx(hw, msgbuf, E1000_VFMAILBOX_SIZE, vf);
 
 	if (retval)
-		dev_err(&adapter->pdev->dev,
-		        "Error receiving message from VF\n");
+		dev_err(&pdev->dev, "Error receiving message from VF\n");
 
 	/* this is a message we already processed, do nothing */
 	if (msgbuf[0] & (E1000_VT_MSGTYPE_ACK | E1000_VT_MSGTYPE_NACK))
-		return retval;
+		return;
 
 	/*
 	 * until the vf completes a reset it should not be
@@ -4230,20 +4438,25 @@
 
 	if (msgbuf[0] == E1000_VF_RESET) {
 		igb_vf_reset_msg(adapter, vf);
-
-		return retval;
+		return;
 	}
 
-	if (!adapter->vf_data[vf].clear_to_send) {
-		msgbuf[0] |= E1000_VT_MSGTYPE_NACK;
-		igb_write_mbx(hw, msgbuf, 1, vf);
-		return retval;
+	if (!(vf_data->flags & IGB_VF_FLAG_CTS)) {
+		msgbuf[0] = E1000_VT_MSGTYPE_NACK;
+		if (time_after(jiffies, vf_data->last_nack + (2 * HZ))) {
+			igb_write_mbx(hw, msgbuf, 1, vf);
+			vf_data->last_nack = jiffies;
+		}
+		return;
 	}
 
 	switch ((msgbuf[0] & 0xFFFF)) {
 	case E1000_VF_SET_MAC_ADDR:
 		retval = igb_set_vf_mac_addr(adapter, msgbuf, vf);
 		break;
+	case E1000_VF_SET_PROMISC:
+		retval = igb_set_vf_promisc(adapter, msgbuf, vf);
+		break;
 	case E1000_VF_SET_MULTICAST:
 		retval = igb_set_vf_multicasts(adapter, msgbuf, vf);
 		break;
@@ -4254,7 +4467,7 @@
 		retval = igb_set_vf_vlan(adapter, msgbuf, vf);
 		break;
 	default:
-		dev_err(&adapter->pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
+		dev_err(&pdev->dev, "Unhandled Msg %08x\n", msgbuf[0]);
 		retval = -1;
 		break;
 	}
@@ -4268,8 +4481,53 @@
 	msgbuf[0] |= E1000_VT_MSGTYPE_CTS;
 
 	igb_write_mbx(hw, msgbuf, 1, vf);
+}
 
-	return retval;
+static void igb_msg_task(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	u32 vf;
+
+	for (vf = 0; vf < adapter->vfs_allocated_count; vf++) {
+		/* process any reset requests */
+		if (!igb_check_for_rst(hw, vf))
+			igb_vf_reset_event(adapter, vf);
+
+		/* process any messages pending */
+		if (!igb_check_for_msg(hw, vf))
+			igb_rcv_msg_from_vf(adapter, vf);
+
+		/* process any acks */
+		if (!igb_check_for_ack(hw, vf))
+			igb_rcv_ack_from_vf(adapter, vf);
+	}
+}
+
+/**
+ *  igb_set_uta - Set unicast filter table address
+ *  @adapter: board private structure
+ *
+ *  The unicast table address is a register array of 32-bit registers.
+ *  The table is meant to be used in a way similar to how the MTA is used
+ *  however due to certain limitations in the hardware it is necessary to
+ *  set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscous
+ *  enable bit to allow vlan tag stripping when promiscous mode is enabled
+ **/
+static void igb_set_uta(struct igb_adapter *adapter)
+{
+	struct e1000_hw *hw = &adapter->hw;
+	int i;
+
+	/* The UTA table only exists on 82576 hardware and newer */
+	if (hw->mac.type < e1000_82576)
+		return;
+
+	/* we only need to do this if VMDq is enabled */
+	if (!adapter->vfs_allocated_count)
+		return;
+
+	for (i = 0; i < hw->mac.uta_reg_count; i++)
+		array_wr32(E1000_UTA, i, ~0);
 }
 
 /**
@@ -4279,15 +4537,15 @@
  **/
 static irqreturn_t igb_intr_msi(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	struct e1000_hw *hw = &adapter->hw;
 	/* read ICR disables interrupts using IAM */
 	u32 icr = rd32(E1000_ICR);
 
-	igb_write_itr(adapter->rx_ring);
+	igb_write_itr(q_vector);
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -4298,7 +4556,7 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	napi_schedule(&adapter->rx_ring[0].napi);
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
@@ -4310,8 +4568,8 @@
  **/
 static irqreturn_t igb_intr(int irq, void *data)
 {
-	struct net_device *netdev = data;
-	struct igb_adapter *adapter = netdev_priv(netdev);
+	struct igb_adapter *adapter = data;
+	struct igb_q_vector *q_vector = adapter->q_vector[0];
 	struct e1000_hw *hw = &adapter->hw;
 	/* Interrupt Auto-Mask...upon reading ICR, interrupts are masked.  No
 	 * need for the IMC write */
@@ -4319,14 +4577,14 @@
 	if (!icr)
 		return IRQ_NONE;  /* Not our interrupt */
 
-	igb_write_itr(adapter->rx_ring);
+	igb_write_itr(q_vector);
 
 	/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
 	 * not set, then the adapter didn't send an interrupt */
 	if (!(icr & E1000_ICR_INT_ASSERTED))
 		return IRQ_NONE;
 
-	if(icr & E1000_ICR_DOUTSYNC) {
+	if (icr & E1000_ICR_DOUTSYNC) {
 		/* HW is reporting DMA is out of sync */
 		adapter->stats.doosync++;
 	}
@@ -4338,26 +4596,27 @@
 			mod_timer(&adapter->watchdog_timer, jiffies + 1);
 	}
 
-	napi_schedule(&adapter->rx_ring[0].napi);
+	napi_schedule(&q_vector->napi);
 
 	return IRQ_HANDLED;
 }
 
-static inline void igb_rx_irq_enable(struct igb_ring *rx_ring)
+static inline void igb_ring_irq_enable(struct igb_q_vector *q_vector)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
+	struct igb_adapter *adapter = q_vector->adapter;
 	struct e1000_hw *hw = &adapter->hw;
 
-	if (adapter->itr_setting & 3) {
-		if (adapter->num_rx_queues == 1)
+	if ((q_vector->rx_ring && (adapter->rx_itr_setting & 3)) ||
+	    (!q_vector->rx_ring && (adapter->tx_itr_setting & 3))) {
+		if (!adapter->msix_entries)
 			igb_set_itr(adapter);
 		else
-			igb_update_ring_itr(rx_ring);
+			igb_update_ring_itr(q_vector);
 	}
 
 	if (!test_bit(__IGB_DOWN, &adapter->state)) {
 		if (adapter->msix_entries)
-			wr32(E1000_EIMS, rx_ring->eims_value);
+			wr32(E1000_EIMS, q_vector->eims_value);
 		else
 			igb_irq_enable(adapter);
 	}
@@ -4370,76 +4629,94 @@
  **/
 static int igb_poll(struct napi_struct *napi, int budget)
 {
-	struct igb_ring *rx_ring = container_of(napi, struct igb_ring, napi);
-	int work_done = 0;
+	struct igb_q_vector *q_vector = container_of(napi,
+	                                             struct igb_q_vector,
+	                                             napi);
+	int tx_clean_complete = 1, work_done = 0;
 
 #ifdef CONFIG_IGB_DCA
-	if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-		igb_update_rx_dca(rx_ring);
+	if (q_vector->adapter->flags & IGB_FLAG_DCA_ENABLED)
+		igb_update_dca(q_vector);
 #endif
-	igb_clean_rx_irq_adv(rx_ring, &work_done, budget);
+	if (q_vector->tx_ring)
+		tx_clean_complete = igb_clean_tx_irq(q_vector);
 
-	if (rx_ring->buddy) {
-#ifdef CONFIG_IGB_DCA
-		if (rx_ring->adapter->flags & IGB_FLAG_DCA_ENABLED)
-			igb_update_tx_dca(rx_ring->buddy);
-#endif
-		if (!igb_clean_tx_irq(rx_ring->buddy))
-			work_done = budget;
-	}
+	if (q_vector->rx_ring)
+		igb_clean_rx_irq_adv(q_vector, &work_done, budget);
+
+	if (!tx_clean_complete)
+		work_done = budget;
 
 	/* If not enough Rx work done, exit the polling mode */
 	if (work_done < budget) {
 		napi_complete(napi);
-		igb_rx_irq_enable(rx_ring);
+		igb_ring_irq_enable(q_vector);
 	}
 
 	return work_done;
 }
 
 /**
- * igb_hwtstamp - utility function which checks for TX time stamp
+ * igb_systim_to_hwtstamp - convert system time value to hw timestamp
  * @adapter: board private structure
+ * @shhwtstamps: timestamp structure to update
+ * @regval: unsigned 64bit system time value.
+ *
+ * We need to convert the system time value stored in the RX/TXSTMP registers
+ * into a hwtstamp which can be used by the upper level timestamping functions
+ */
+static void igb_systim_to_hwtstamp(struct igb_adapter *adapter,
+                                   struct skb_shared_hwtstamps *shhwtstamps,
+                                   u64 regval)
+{
+	u64 ns;
+
+	ns = timecounter_cyc2time(&adapter->clock, regval);
+	timecompare_update(&adapter->compare, ns);
+	memset(shhwtstamps, 0, sizeof(struct skb_shared_hwtstamps));
+	shhwtstamps->hwtstamp = ns_to_ktime(ns);
+	shhwtstamps->syststamp = timecompare_transform(&adapter->compare, ns);
+}
+
+/**
+ * igb_tx_hwtstamp - utility function which checks for TX time stamp
+ * @q_vector: pointer to q_vector containing needed info
  * @skb: packet that was just sent
  *
  * If we were asked to do hardware stamping and such a time stamp is
  * available, then it must have been for this skb here because we only
  * allow only one such packet into the queue.
  */
-static void igb_tx_hwtstamp(struct igb_adapter *adapter, struct sk_buff *skb)
+static void igb_tx_hwtstamp(struct igb_q_vector *q_vector, struct sk_buff *skb)
 {
+	struct igb_adapter *adapter = q_vector->adapter;
 	union skb_shared_tx *shtx = skb_tx(skb);
 	struct e1000_hw *hw = &adapter->hw;
+	struct skb_shared_hwtstamps shhwtstamps;
+	u64 regval;
 
-	if (unlikely(shtx->hardware)) {
-		u32 valid = rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID;
-		if (valid) {
-			u64 regval = rd32(E1000_TXSTMPL);
-			u64 ns;
-			struct skb_shared_hwtstamps shhwtstamps;
+	/* if skb does not support hw timestamp or TX stamp not valid exit */
+	if (likely(!shtx->hardware) ||
+	    !(rd32(E1000_TSYNCTXCTL) & E1000_TSYNCTXCTL_VALID))
+		return;
 
-			memset(&shhwtstamps, 0, sizeof(shhwtstamps));
-			regval |= (u64)rd32(E1000_TXSTMPH) << 32;
-			ns = timecounter_cyc2time(&adapter->clock,
-						  regval);
-			timecompare_update(&adapter->compare, ns);
-			shhwtstamps.hwtstamp = ns_to_ktime(ns);
-			shhwtstamps.syststamp =
-				timecompare_transform(&adapter->compare, ns);
-			skb_tstamp_tx(skb, &shhwtstamps);
-		}
-	}
+	regval = rd32(E1000_TXSTMPL);
+	regval |= (u64)rd32(E1000_TXSTMPH) << 32;
+
+	igb_systim_to_hwtstamp(adapter, &shhwtstamps, regval);
+	skb_tstamp_tx(skb, &shhwtstamps);
 }
 
 /**
  * igb_clean_tx_irq - Reclaim resources after transmit completes
- * @adapter: board private structure
+ * @q_vector: pointer to q_vector containing needed info
  * returns true if ring is completely cleaned
  **/
-static bool igb_clean_tx_irq(struct igb_ring *tx_ring)
+static bool igb_clean_tx_irq(struct igb_q_vector *q_vector)
 {
-	struct igb_adapter *adapter = tx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct igb_ring *tx_ring = q_vector->tx_ring;
+	struct net_device *netdev = tx_ring->netdev;
 	struct e1000_hw *hw = &adapter->hw;
 	struct igb_buffer *buffer_info;
 	struct sk_buff *skb;
@@ -4470,10 +4747,10 @@
 				total_packets += segs;
 				total_bytes += bytecount;
 
-				igb_tx_hwtstamp(adapter, skb);
+				igb_tx_hwtstamp(q_vector, skb);
 			}
 
-			igb_unmap_and_free_tx_resource(adapter, buffer_info);
+			igb_unmap_and_free_tx_resource(tx_ring, buffer_info);
 			tx_desc->wb.status = 0;
 
 			i++;
@@ -4496,7 +4773,7 @@
 		if (__netif_subqueue_stopped(netdev, tx_ring->queue_index) &&
 		    !(test_bit(__IGB_DOWN, &adapter->state))) {
 			netif_wake_subqueue(netdev, tx_ring->queue_index);
-			++adapter->restart_queue;
+			tx_ring->tx_stats.restart_queue++;
 		}
 	}
 
@@ -4511,7 +4788,7 @@
 			 E1000_STATUS_TXOFF)) {
 
 			/* detected Tx unit hang */
-			dev_err(&adapter->pdev->dev,
+			dev_err(&tx_ring->pdev->dev,
 				"Detected Tx Unit Hang\n"
 				"  Tx Queue             <%d>\n"
 				"  TDH                  <%x>\n"
@@ -4524,11 +4801,11 @@
 				"  jiffies              <%lx>\n"
 				"  desc.status          <%x>\n",
 				tx_ring->queue_index,
-				readl(adapter->hw.hw_addr + tx_ring->head),
-				readl(adapter->hw.hw_addr + tx_ring->tail),
+				readl(tx_ring->head),
+				readl(tx_ring->tail),
 				tx_ring->next_to_use,
 				tx_ring->next_to_clean,
-				tx_ring->buffer_info[i].time_stamp,
+				tx_ring->buffer_info[eop].time_stamp,
 				eop,
 				jiffies,
 				eop_desc->wb.status);
@@ -4539,43 +4816,38 @@
 	tx_ring->total_packets += total_packets;
 	tx_ring->tx_stats.bytes += total_bytes;
 	tx_ring->tx_stats.packets += total_packets;
-	adapter->net_stats.tx_bytes += total_bytes;
-	adapter->net_stats.tx_packets += total_packets;
 	return (count < tx_ring->count);
 }
 
 /**
  * igb_receive_skb - helper function to handle rx indications
- * @ring: pointer to receive ring receving this packet
- * @status: descriptor status field as written by hardware
- * @rx_desc: receive descriptor containing vlan and type information.
- * @skb: pointer to sk_buff to be indicated to stack
+ * @q_vector: structure containing interrupt and ring information
+ * @skb: packet to send up
+ * @vlan_tag: vlan tag for packet
  **/
-static void igb_receive_skb(struct igb_ring *ring, u8 status,
-                            union e1000_adv_rx_desc * rx_desc,
-                            struct sk_buff *skb)
+static void igb_receive_skb(struct igb_q_vector *q_vector,
+                            struct sk_buff *skb,
+                            u16 vlan_tag)
 {
-	struct igb_adapter * adapter = ring->adapter;
-	bool vlan_extracted = (adapter->vlgrp && (status & E1000_RXD_STAT_VP));
+	struct igb_adapter *adapter = q_vector->adapter;
 
-	skb_record_rx_queue(skb, ring->queue_index);
-	if (vlan_extracted)
-		vlan_gro_receive(&ring->napi, adapter->vlgrp,
-		                 le16_to_cpu(rx_desc->wb.upper.vlan),
-		                 skb);
+	if (vlan_tag)
+		vlan_gro_receive(&q_vector->napi, adapter->vlgrp,
+		                 vlan_tag, skb);
 	else
-		napi_gro_receive(&ring->napi, skb);
+		napi_gro_receive(&q_vector->napi, skb);
 }
 
-static inline void igb_rx_checksum_adv(struct igb_adapter *adapter,
+static inline void igb_rx_checksum_adv(struct igb_ring *ring,
 				       u32 status_err, struct sk_buff *skb)
 {
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Ignore Checksum bit is set or checksum is disabled through ethtool */
-	if ((status_err & E1000_RXD_STAT_IXSM) ||
-	    (adapter->flags & IGB_FLAG_RX_CSUM_DISABLED))
+	if (!(ring->flags & IGB_RING_FLAG_RX_CSUM) ||
+	     (status_err & E1000_RXD_STAT_IXSM))
 		return;
+
 	/* TCP/UDP checksum error bit is set */
 	if (status_err &
 	    (E1000_RXDEXT_STATERR_TCPE | E1000_RXDEXT_STATERR_IPE)) {
@@ -4584,9 +4856,10 @@
 		 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
 		 * packets, (aka let the stack check the crc32c)
 		 */
-		if (!((adapter->hw.mac.type == e1000_82576) &&
-		      (skb->len == 60)))
-			adapter->hw_csum_err++;
+		if ((skb->len == 60) &&
+		    (ring->flags & IGB_RING_FLAG_RX_SCTP_CSUM))
+			ring->rx_stats.csum_err++;
+
 		/* let the stack verify checksum errors */
 		return;
 	}
@@ -4594,11 +4867,38 @@
 	if (status_err & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))
 		skb->ip_summed = CHECKSUM_UNNECESSARY;
 
-	dev_dbg(&adapter->pdev->dev, "cksum success: bits %08X\n", status_err);
-	adapter->hw_csum_good++;
+	dev_dbg(&ring->pdev->dev, "cksum success: bits %08X\n", status_err);
 }
 
-static inline u16 igb_get_hlen(struct igb_adapter *adapter,
+static inline void igb_rx_hwtstamp(struct igb_q_vector *q_vector, u32 staterr,
+                                   struct sk_buff *skb)
+{
+	struct igb_adapter *adapter = q_vector->adapter;
+	struct e1000_hw *hw = &adapter->hw;
+	u64 regval;
+
+	/*
+	 * If this bit is set, then the RX registers contain the time stamp. No
+	 * other packet will be time stamped until we read these registers, so
+	 * read the registers to make them available again. Because only one
+	 * packet can be time stamped at a time, we know that the register
+	 * values must belong to this one here and therefore we don't need to
+	 * compare any of the additional attributes stored for it.
+	 *
+	 * If nothing went wrong, then it should have a skb_shared_tx that we
+	 * can turn into a skb_shared_hwtstamps.
+	 */
+	if (likely(!(staterr & E1000_RXDADV_STAT_TS)))
+		return;
+	if (!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID))
+		return;
+
+	regval = rd32(E1000_RXSTMPL);
+	regval |= (u64)rd32(E1000_RXSTMPH) << 32;
+
+	igb_systim_to_hwtstamp(adapter, skb_hwtstamps(skb), regval);
+}
+static inline u16 igb_get_hlen(struct igb_ring *rx_ring,
                                union e1000_adv_rx_desc *rx_desc)
 {
 	/* HW will not DMA in data larger than the given buffer, even if it
@@ -4607,18 +4907,17 @@
 	 */
 	u16 hlen = (le16_to_cpu(rx_desc->wb.lower.lo_dword.hdr_info) &
 	           E1000_RXDADV_HDRBUFLEN_MASK) >> E1000_RXDADV_HDRBUFLEN_SHIFT;
-	if (hlen > adapter->rx_ps_hdr_size)
-		hlen = adapter->rx_ps_hdr_size;
+	if (hlen > rx_ring->rx_buffer_len)
+		hlen = rx_ring->rx_buffer_len;
 	return hlen;
 }
 
-static bool igb_clean_rx_irq_adv(struct igb_ring *rx_ring,
-				 int *work_done, int budget)
+static bool igb_clean_rx_irq_adv(struct igb_q_vector *q_vector,
+                                 int *work_done, int budget)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
-	struct e1000_hw *hw = &adapter->hw;
-	struct pci_dev *pdev = adapter->pdev;
+	struct igb_ring *rx_ring = q_vector->rx_ring;
+	struct net_device *netdev = rx_ring->netdev;
+	struct pci_dev *pdev = rx_ring->pdev;
 	union e1000_adv_rx_desc *rx_desc , *next_rxd;
 	struct igb_buffer *buffer_info , *next_buffer;
 	struct sk_buff *skb;
@@ -4628,6 +4927,7 @@
 	unsigned int i;
 	u32 staterr;
 	u16 length;
+	u16 vlan_tag;
 
 	i = rx_ring->next_to_clean;
 	buffer_info = &rx_ring->buffer_info[i];
@@ -4646,6 +4946,7 @@
 		i++;
 		if (i == rx_ring->count)
 			i = 0;
+
 		next_rxd = E1000_RX_DESC_ADV(*rx_ring, i);
 		prefetch(next_rxd);
 		next_buffer = &rx_ring->buffer_info[i];
@@ -4654,23 +4955,16 @@
 		cleaned = true;
 		cleaned_count++;
 
-		/* this is the fast path for the non-packet split case */
-		if (!adapter->rx_ps_hdr_size) {
-			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_buffer_len,
-					 PCI_DMA_FROMDEVICE);
-			buffer_info->dma = 0;
-			skb_put(skb, length);
-			goto send_up;
-		}
-
 		if (buffer_info->dma) {
-			u16 hlen = igb_get_hlen(adapter, rx_desc);
 			pci_unmap_single(pdev, buffer_info->dma,
-					 adapter->rx_ps_hdr_size,
+					 rx_ring->rx_buffer_len,
 					 PCI_DMA_FROMDEVICE);
 			buffer_info->dma = 0;
-			skb_put(skb, hlen);
+			if (rx_ring->rx_buffer_len >= IGB_RXBUFFER_1024) {
+				skb_put(skb, length);
+				goto send_up;
+			}
+			skb_put(skb, igb_get_hlen(rx_ring, rx_desc));
 		}
 
 		if (length) {
@@ -4683,15 +4977,13 @@
 						buffer_info->page_offset,
 						length);
 
-			if ((adapter->rx_buffer_len > (PAGE_SIZE / 2)) ||
-			    (page_count(buffer_info->page) != 1))
+			if (page_count(buffer_info->page) != 1)
 				buffer_info->page = NULL;
 			else
 				get_page(buffer_info->page);
 
 			skb->len += length;
 			skb->data_len += length;
-
 			skb->truesize += length;
 		}
 
@@ -4703,60 +4995,24 @@
 			goto next_desc;
 		}
 send_up:
-		/*
-		 * If this bit is set, then the RX registers contain
-		 * the time stamp. No other packet will be time
-		 * stamped until we read these registers, so read the
-		 * registers to make them available again. Because
-		 * only one packet can be time stamped at a time, we
-		 * know that the register values must belong to this
-		 * one here and therefore we don't need to compare
-		 * any of the additional attributes stored for it.
-		 *
-		 * If nothing went wrong, then it should have a
-		 * skb_shared_tx that we can turn into a
-		 * skb_shared_hwtstamps.
-		 *
-		 * TODO: can time stamping be triggered (thus locking
-		 * the registers) without the packet reaching this point
-		 * here? In that case RX time stamping would get stuck.
-		 *
-		 * TODO: in "time stamp all packets" mode this bit is
-		 * not set. Need a global flag for this mode and then
-		 * always read the registers. Cannot be done without
-		 * a race condition.
-		 */
-		if (unlikely(staterr & E1000_RXD_STAT_TS)) {
-			u64 regval;
-			u64 ns;
-			struct skb_shared_hwtstamps *shhwtstamps =
-				skb_hwtstamps(skb);
-
-			WARN(!(rd32(E1000_TSYNCRXCTL) & E1000_TSYNCRXCTL_VALID),
-			     "igb: no RX time stamp available for time stamped packet");
-			regval = rd32(E1000_RXSTMPL);
-			regval |= (u64)rd32(E1000_RXSTMPH) << 32;
-			ns = timecounter_cyc2time(&adapter->clock, regval);
-			timecompare_update(&adapter->compare, ns);
-			memset(shhwtstamps, 0, sizeof(*shhwtstamps));
-			shhwtstamps->hwtstamp = ns_to_ktime(ns);
-			shhwtstamps->syststamp =
-				timecompare_transform(&adapter->compare, ns);
-		}
-
 		if (staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK) {
 			dev_kfree_skb_irq(skb);
 			goto next_desc;
 		}
 
+		igb_rx_hwtstamp(q_vector, staterr, skb);
 		total_bytes += skb->len;
 		total_packets++;
 
-		igb_rx_checksum_adv(adapter, staterr, skb);
+		igb_rx_checksum_adv(rx_ring, staterr, skb);
 
 		skb->protocol = eth_type_trans(skb, netdev);
+		skb_record_rx_queue(skb, rx_ring->queue_index);
 
-		igb_receive_skb(rx_ring, staterr, rx_desc, skb);
+		vlan_tag = ((staterr & E1000_RXD_STAT_VP) ?
+		            le16_to_cpu(rx_desc->wb.upper.vlan) : 0);
+
+		igb_receive_skb(q_vector, skb, vlan_tag);
 
 next_desc:
 		rx_desc->wb.upper.status_error = 0;
@@ -4783,8 +5039,6 @@
 	rx_ring->total_bytes += total_bytes;
 	rx_ring->rx_stats.packets += total_packets;
 	rx_ring->rx_stats.bytes += total_bytes;
-	adapter->net_stats.rx_bytes += total_bytes;
-	adapter->net_stats.rx_packets += total_packets;
 	return cleaned;
 }
 
@@ -4792,12 +5046,9 @@
  * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
  * @adapter: address of board private structure
  **/
-static void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring,
-				     int cleaned_count)
+void igb_alloc_rx_buffers_adv(struct igb_ring *rx_ring, int cleaned_count)
 {
-	struct igb_adapter *adapter = rx_ring->adapter;
-	struct net_device *netdev = adapter->netdev;
-	struct pci_dev *pdev = adapter->pdev;
+	struct net_device *netdev = rx_ring->netdev;
 	union e1000_adv_rx_desc *rx_desc;
 	struct igb_buffer *buffer_info;
 	struct sk_buff *skb;
@@ -4807,19 +5058,16 @@
 	i = rx_ring->next_to_use;
 	buffer_info = &rx_ring->buffer_info[i];
 
-	if (adapter->rx_ps_hdr_size)
-		bufsz = adapter->rx_ps_hdr_size;
-	else
-		bufsz = adapter->rx_buffer_len;
+	bufsz = rx_ring->rx_buffer_len;
 
 	while (cleaned_count--) {
 		rx_desc = E1000_RX_DESC_ADV(*rx_ring, i);
 
-		if (adapter->rx_ps_hdr_size && !buffer_info->page_dma) {
+		if ((bufsz < IGB_RXBUFFER_1024) && !buffer_info->page_dma) {
 			if (!buffer_info->page) {
-				buffer_info->page = alloc_page(GFP_ATOMIC);
+				buffer_info->page = netdev_alloc_page(netdev);
 				if (!buffer_info->page) {
-					adapter->alloc_rx_buff_failed++;
+					rx_ring->rx_stats.alloc_failed++;
 					goto no_buffers;
 				}
 				buffer_info->page_offset = 0;
@@ -4827,39 +5075,48 @@
 				buffer_info->page_offset ^= PAGE_SIZE / 2;
 			}
 			buffer_info->page_dma =
-				pci_map_page(pdev, buffer_info->page,
+				pci_map_page(rx_ring->pdev, buffer_info->page,
 					     buffer_info->page_offset,
 					     PAGE_SIZE / 2,
 					     PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(rx_ring->pdev,
+			                          buffer_info->page_dma)) {
+				buffer_info->page_dma = 0;
+				rx_ring->rx_stats.alloc_failed++;
+				goto no_buffers;
+			}
 		}
 
-		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
+		skb = buffer_info->skb;
+		if (!skb) {
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			if (!skb) {
-				adapter->alloc_rx_buff_failed++;
+				rx_ring->rx_stats.alloc_failed++;
 				goto no_buffers;
 			}
 
-			/* Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
-
 			buffer_info->skb = skb;
-			buffer_info->dma = pci_map_single(pdev, skb->data,
+		}
+		if (!buffer_info->dma) {
+			buffer_info->dma = pci_map_single(rx_ring->pdev,
+			                                  skb->data,
 							  bufsz,
 							  PCI_DMA_FROMDEVICE);
+			if (pci_dma_mapping_error(rx_ring->pdev,
+			                          buffer_info->dma)) {
+				buffer_info->dma = 0;
+				rx_ring->rx_stats.alloc_failed++;
+				goto no_buffers;
+			}
 		}
 		/* Refresh the desc even if buffer_addrs didn't change because
 		 * each write-back erases this info. */
-		if (adapter->rx_ps_hdr_size) {
+		if (bufsz < IGB_RXBUFFER_1024) {
 			rx_desc->read.pkt_addr =
 			     cpu_to_le64(buffer_info->page_dma);
 			rx_desc->read.hdr_addr = cpu_to_le64(buffer_info->dma);
 		} else {
-			rx_desc->read.pkt_addr =
-			     cpu_to_le64(buffer_info->dma);
+			rx_desc->read.pkt_addr = cpu_to_le64(buffer_info->dma);
 			rx_desc->read.hdr_addr = 0;
 		}
 
@@ -4882,7 +5139,7 @@
 		 * applicable for weak-ordered memory model archs,
 		 * such as IA-64). */
 		wmb();
-		writel(i, adapter->hw.hw_addr + rx_ring->tail);
+		writel(i, rx_ring->tail);
 	}
 }
 
@@ -4941,13 +5198,11 @@
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	struct hwtstamp_config config;
-	u32 tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED;
-	u32 tsync_rx_ctl_bit = E1000_TSYNCRXCTL_ENABLED;
-	u32 tsync_rx_ctl_type = 0;
+	u32 tsync_tx_ctl = E1000_TSYNCTXCTL_ENABLED;
+	u32 tsync_rx_ctl = E1000_TSYNCRXCTL_ENABLED;
 	u32 tsync_rx_cfg = 0;
-	int is_l4 = 0;
-	int is_l2 = 0;
-	short port = 319; /* PTP */
+	bool is_l4 = false;
+	bool is_l2 = false;
 	u32 regval;
 
 	if (copy_from_user(&config, ifr->ifr_data, sizeof(config)))
@@ -4959,10 +5214,8 @@
 
 	switch (config.tx_type) {
 	case HWTSTAMP_TX_OFF:
-		tsync_tx_ctl_bit = 0;
-		break;
+		tsync_tx_ctl = 0;
 	case HWTSTAMP_TX_ON:
-		tsync_tx_ctl_bit = E1000_TSYNCTXCTL_ENABLED;
 		break;
 	default:
 		return -ERANGE;
@@ -4970,7 +5223,7 @@
 
 	switch (config.rx_filter) {
 	case HWTSTAMP_FILTER_NONE:
-		tsync_rx_ctl_bit = 0;
+		tsync_rx_ctl = 0;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
@@ -4981,86 +5234,97 @@
 		 * possible to time stamp both Sync and Delay_Req messages
 		 * => fall back to time stamping all packets
 		 */
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_ALL;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_ALL;
 		config.rx_filter = HWTSTAMP_FILTER_ALL;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
-		is_l4 = 1;
+		is_l4 = true;
 		break;
 	case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L4_V1;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L4_V1;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
-		is_l4 = 1;
+		is_l4 = true;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
-		is_l2 = 1;
-		is_l4 = 1;
+		is_l2 = true;
+		is_l4 = true;
 		config.rx_filter = HWTSTAMP_FILTER_SOME;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
 	case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_L2_L4_V2;
 		tsync_rx_cfg = E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
-		is_l2 = 1;
-		is_l4 = 1;
+		is_l2 = true;
+		is_l4 = true;
 		config.rx_filter = HWTSTAMP_FILTER_SOME;
 		break;
 	case HWTSTAMP_FILTER_PTP_V2_EVENT:
 	case HWTSTAMP_FILTER_PTP_V2_SYNC:
 	case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
-		tsync_rx_ctl_type = E1000_TSYNCRXCTL_TYPE_EVENT_V2;
+		tsync_rx_ctl |= E1000_TSYNCRXCTL_TYPE_EVENT_V2;
 		config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
-		is_l2 = 1;
+		is_l2 = true;
 		break;
 	default:
 		return -ERANGE;
 	}
 
+	if (hw->mac.type == e1000_82575) {
+		if (tsync_rx_ctl | tsync_tx_ctl)
+			return -EINVAL;
+		return 0;
+	}
+
 	/* enable/disable TX */
 	regval = rd32(E1000_TSYNCTXCTL);
-	regval = (regval & ~E1000_TSYNCTXCTL_ENABLED) | tsync_tx_ctl_bit;
+	regval &= ~E1000_TSYNCTXCTL_ENABLED;
+	regval |= tsync_tx_ctl;
 	wr32(E1000_TSYNCTXCTL, regval);
 
-	/* enable/disable RX, define which PTP packets are time stamped */
+	/* enable/disable RX */
 	regval = rd32(E1000_TSYNCRXCTL);
-	regval = (regval & ~E1000_TSYNCRXCTL_ENABLED) | tsync_rx_ctl_bit;
-	regval = (regval & ~0xE) | tsync_rx_ctl_type;
+	regval &= ~(E1000_TSYNCRXCTL_ENABLED | E1000_TSYNCRXCTL_TYPE_MASK);
+	regval |= tsync_rx_ctl;
 	wr32(E1000_TSYNCRXCTL, regval);
+
+	/* define which PTP packets are time stamped */
 	wr32(E1000_TSYNCRXCFG, tsync_rx_cfg);
 
-	/*
-	 * Ethertype Filter Queue Filter[0][15:0] = 0x88F7
-	 *                                          (Ethertype to filter on)
-	 * Ethertype Filter Queue Filter[0][26] = 0x1 (Enable filter)
-	 * Ethertype Filter Queue Filter[0][30] = 0x1 (Enable Timestamping)
-	 */
-	wr32(E1000_ETQF0, is_l2 ? 0x440088f7 : 0);
+	/* define ethertype filter for timestamped packets */
+	if (is_l2)
+		wr32(E1000_ETQF(3),
+		                (E1000_ETQF_FILTER_ENABLE | /* enable filter */
+		                 E1000_ETQF_1588 | /* enable timestamping */
+		                 ETH_P_1588));     /* 1588 eth protocol type */
+	else
+		wr32(E1000_ETQF(3), 0);
 
-	/* L4 Queue Filter[0]: only filter by source and destination port */
-	wr32(E1000_SPQF0, htons(port));
-	wr32(E1000_IMIREXT(0), is_l4 ?
-	     ((1<<12) | (1<<19) /* bypass size and control flags */) : 0);
-	wr32(E1000_IMIR(0), is_l4 ?
-	     (htons(port)
-	      | (0<<16) /* immediate interrupt disabled */
-	      | 0 /* (1<<17) bit cleared: do not bypass
-		     destination port check */)
-		: 0);
-	wr32(E1000_FTQF0, is_l4 ?
-	     (0x11 /* UDP */
-	      | (1<<15) /* VF not compared */
-	      | (1<<27) /* Enable Timestamping */
-	      | (7<<28) /* only source port filter enabled,
-			   source/target address and protocol
-			   masked */)
-	     : ((1<<15) | (15<<28) /* all mask bits set = filter not
-				      enabled */));
+#define PTP_PORT 319
+	/* L4 Queue Filter[3]: filter by destination port and protocol */
+	if (is_l4) {
+		u32 ftqf = (IPPROTO_UDP /* UDP */
+			| E1000_FTQF_VF_BP /* VF not compared */
+			| E1000_FTQF_1588_TIME_STAMP /* Enable Timestamping */
+			| E1000_FTQF_MASK); /* mask all inputs */
+		ftqf &= ~E1000_FTQF_MASK_PROTO_BP; /* enable protocol check */
 
+		wr32(E1000_IMIR(3), htons(PTP_PORT));
+		wr32(E1000_IMIREXT(3),
+		     (E1000_IMIREXT_SIZE_BP | E1000_IMIREXT_CTRL_BP));
+		if (hw->mac.type == e1000_82576) {
+			/* enable source port check */
+			wr32(E1000_SPQF(3), htons(PTP_PORT));
+			ftqf &= ~E1000_FTQF_MASK_SOURCE_PORT_BP;
+		}
+		wr32(E1000_FTQF(3), ftqf);
+	} else {
+		wr32(E1000_FTQF(3), E1000_FTQF_MASK);
+	}
 	wrfl();
 
 	adapter->hwtstamp_config = config;
@@ -5137,21 +5401,15 @@
 		ctrl |= E1000_CTRL_VME;
 		wr32(E1000_CTRL, ctrl);
 
-		/* enable VLAN receive filtering */
+		/* Disable CFI check */
 		rctl = rd32(E1000_RCTL);
 		rctl &= ~E1000_RCTL_CFIEN;
 		wr32(E1000_RCTL, rctl);
-		igb_update_mng_vlan(adapter);
 	} else {
 		/* disable VLAN tag insert/strip */
 		ctrl = rd32(E1000_CTRL);
 		ctrl &= ~E1000_CTRL_VME;
 		wr32(E1000_CTRL, ctrl);
-
-		if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) {
-			igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-			adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
-		}
 	}
 
 	igb_rlpml_set(adapter);
@@ -5166,16 +5424,11 @@
 	struct e1000_hw *hw = &adapter->hw;
 	int pf_id = adapter->vfs_allocated_count;
 
-	if ((hw->mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	    (vid == adapter->mng_vlan_id))
-		return;
+	/* attempt to add filter to vlvf array */
+	igb_vlvf_set(adapter, vid, true, pf_id);
 
-	/* add vid to vlvf if sr-iov is enabled,
-	 * if that fails add directly to filter table */
-	if (igb_vlvf_set(adapter, vid, true, pf_id))
-		igb_vfta_set(hw, vid, true);
-
+	/* add the filter since PF can receive vlans w/o entry in vlvf */
+	igb_vfta_set(hw, vid, true);
 }
 
 static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -5183,6 +5436,7 @@
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
 	int pf_id = adapter->vfs_allocated_count;
+	s32 err;
 
 	igb_irq_disable(adapter);
 	vlan_group_set_device(adapter->vlgrp, vid, NULL);
@@ -5190,17 +5444,11 @@
 	if (!test_bit(__IGB_DOWN, &adapter->state))
 		igb_irq_enable(adapter);
 
-	if ((adapter->hw.mng_cookie.status &
-	     E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
-	    (vid == adapter->mng_vlan_id)) {
-		/* release control to f/w */
-		igb_release_hw_control(adapter);
-		return;
-	}
+	/* remove vlan from VLVF table array */
+	err = igb_vlvf_set(adapter, vid, false, pf_id);
 
-	/* remove vid from vlvf if sr-iov is enabled,
-	 * if not in vlvf remove from vfta */
-	if (igb_vlvf_set(adapter, vid, false, pf_id))
+	/* if vid was not present in VLVF just remove it from table */
+	if (err)
 		igb_vfta_set(hw, vid, false);
 }
 
@@ -5220,6 +5468,7 @@
 
 int igb_set_spd_dplx(struct igb_adapter *adapter, u16 spddplx)
 {
+	struct pci_dev *pdev = adapter->pdev;
 	struct e1000_mac_info *mac = &adapter->hw.mac;
 
 	mac->autoneg = 0;
@@ -5243,8 +5492,7 @@
 		break;
 	case SPEED_1000 + DUPLEX_HALF: /* not supported */
 	default:
-		dev_err(&adapter->pdev->dev,
-			"Unsupported Speed/Duplex configuration\n");
+		dev_err(&pdev->dev, "Unsupported Speed/Duplex configuration\n");
 		return -EINVAL;
 	}
 	return 0;
@@ -5266,9 +5514,7 @@
 	if (netif_running(netdev))
 		igb_close(netdev);
 
-	igb_reset_interrupt_capability(adapter);
-
-	igb_free_queues(adapter);
+	igb_clear_interrupt_scheme(adapter);
 
 #ifdef CONFIG_PM
 	retval = pci_save_state(pdev);
@@ -5300,7 +5546,7 @@
 		wr32(E1000_CTRL, ctrl);
 
 		/* Allow time for pending master requests to run */
-		igb_disable_pcie_master(&adapter->hw);
+		igb_disable_pcie_master(hw);
 
 		wr32(E1000_WUC, E1000_WUC_PME_EN);
 		wr32(E1000_WUFC, wufc);
@@ -5363,9 +5609,7 @@
 	pci_enable_wake(pdev, PCI_D3hot, 0);
 	pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	igb_set_interrupt_capability(adapter);
-
-	if (igb_alloc_queues(adapter)) {
+	if (igb_init_interrupt_scheme(adapter)) {
 		dev_err(&pdev->dev, "Unable to allocate memory for queues\n");
 		return -ENOMEM;
 	}
@@ -5417,22 +5661,16 @@
 	int i;
 
 	if (!adapter->msix_entries) {
+		struct igb_q_vector *q_vector = adapter->q_vector[0];
 		igb_irq_disable(adapter);
-		napi_schedule(&adapter->rx_ring[0].napi);
+		napi_schedule(&q_vector->napi);
 		return;
 	}
 
-	for (i = 0; i < adapter->num_tx_queues; i++) {
-		struct igb_ring *tx_ring = &adapter->tx_ring[i];
-		wr32(E1000_EIMC, tx_ring->eims_value);
-		igb_clean_tx_irq(tx_ring);
-		wr32(E1000_EIMS, tx_ring->eims_value);
-	}
-
-	for (i = 0; i < adapter->num_rx_queues; i++) {
-		struct igb_ring *rx_ring = &adapter->rx_ring[i];
-		wr32(E1000_EIMC, rx_ring->eims_value);
-		napi_schedule(&rx_ring->napi);
+	for (i = 0; i < adapter->num_q_vectors; i++) {
+		struct igb_q_vector *q_vector = adapter->q_vector[i];
+		wr32(E1000_EIMC, q_vector->eims_value);
+		napi_schedule(&q_vector->napi);
 	}
 }
 #endif /* CONFIG_NET_POLL_CONTROLLER */
@@ -5532,6 +5770,33 @@
 	igb_get_hw_control(adapter);
 }
 
+static void igb_rar_set_qsel(struct igb_adapter *adapter, u8 *addr, u32 index,
+                             u8 qsel)
+{
+	u32 rar_low, rar_high;
+	struct e1000_hw *hw = &adapter->hw;
+
+	/* HW expects these in little endian so we reverse the byte order
+	 * from network order (big endian) to little endian
+	 */
+	rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) |
+	          ((u32) addr[2] << 16) | ((u32) addr[3] << 24));
+	rar_high = ((u32) addr[4] | ((u32) addr[5] << 8));
+
+	/* Indicate to hardware the Address is Valid. */
+	rar_high |= E1000_RAH_AV;
+
+	if (hw->mac.type == e1000_82575)
+		rar_high |= E1000_RAH_POOL_1 * qsel;
+	else
+		rar_high |= E1000_RAH_POOL_1 << qsel;
+
+	wr32(E1000_RAL(index), rar_low);
+	wrfl();
+	wr32(E1000_RAH(index), rar_high);
+	wrfl();
+}
+
 static int igb_set_vf_mac(struct igb_adapter *adapter,
                           int vf, unsigned char *mac_addr)
 {
@@ -5542,8 +5807,7 @@
 
 	memcpy(adapter->vf_data[vf].vf_mac_addresses, mac_addr, ETH_ALEN);
 
-	igb_rar_set(hw, mac_addr, rar_entry);
-	igb_set_rah_pool(hw, vf, rar_entry);
+	igb_rar_set_qsel(adapter, mac_addr, rar_entry, vf);
 
 	return 0;
 }
@@ -5551,19 +5815,29 @@
 static void igb_vmm_control(struct igb_adapter *adapter)
 {
 	struct e1000_hw *hw = &adapter->hw;
-	u32 reg_data;
+	u32 reg;
 
-	if (!adapter->vfs_allocated_count)
+	/* replication is not supported for 82575 */
+	if (hw->mac.type == e1000_82575)
 		return;
 
-	/* VF's need PF reset indication before they
-	 * can send/receive mail */
-	reg_data = rd32(E1000_CTRL_EXT);
-	reg_data |= E1000_CTRL_EXT_PFRSTD;
-	wr32(E1000_CTRL_EXT, reg_data);
+	/* enable replication vlan tag stripping */
+	reg = rd32(E1000_RPLOLR);
+	reg |= E1000_RPLOLR_STRVLAN;
+	wr32(E1000_RPLOLR, reg);
 
-	igb_vmdq_set_loopback_pf(hw, true);
-	igb_vmdq_set_replication_pf(hw, true);
+	/* notify HW that the MAC is adding vlan tags */
+	reg = rd32(E1000_DTXCTL);
+	reg |= E1000_DTXCTL_VLAN_ADDED;
+	wr32(E1000_DTXCTL, reg);
+
+	if (adapter->vfs_allocated_count) {
+		igb_vmdq_set_loopback_pf(hw, true);
+		igb_vmdq_set_replication_pf(hw, true);
+	} else {
+		igb_vmdq_set_loopback_pf(hw, false);
+		igb_vmdq_set_replication_pf(hw, false);
+	}
 }
 
 /* igb_main.c */
diff --git a/drivers/net/igbvf/ethtool.c b/drivers/net/igbvf/ethtool.c
index c68265b..8afff07 100644
--- a/drivers/net/igbvf/ethtool.c
+++ b/drivers/net/igbvf/ethtool.c
@@ -367,16 +367,6 @@
 	return *data;
 }
 
-static int igbvf_get_self_test_count(struct net_device *netdev)
-{
-	return IGBVF_TEST_LEN;
-}
-
-static int igbvf_get_stats_count(struct net_device *netdev)
-{
-	return IGBVF_GLOBAL_STATS_LEN;
-}
-
 static void igbvf_diag_test(struct net_device *netdev,
                             struct ethtool_test *eth_test, u64 *data)
 {
@@ -484,6 +474,18 @@
 
 }
 
+static int igbvf_get_sset_count(struct net_device *dev, int stringset)
+{
+	switch(stringset) {
+	case ETH_SS_TEST:
+		return IGBVF_TEST_LEN;
+	case ETH_SS_STATS:
+		return IGBVF_GLOBAL_STATS_LEN;
+	default:
+		return -EINVAL;
+	}
+}
+
 static void igbvf_get_strings(struct net_device *netdev, u32 stringset,
                               u8 *data)
 {
@@ -532,11 +534,10 @@
 	.get_tso		= ethtool_op_get_tso,
 	.set_tso		= igbvf_set_tso,
 	.self_test		= igbvf_diag_test,
+	.get_sset_count		= igbvf_get_sset_count,
 	.get_strings		= igbvf_get_strings,
 	.phys_id		= igbvf_phys_id,
 	.get_ethtool_stats	= igbvf_get_ethtool_stats,
-	.self_test_count	= igbvf_get_self_test_count,
-	.get_stats_count	= igbvf_get_stats_count,
 	.get_coalesce		= igbvf_get_coalesce,
 	.set_coalesce		= igbvf_set_coalesce,
 };
diff --git a/drivers/net/igbvf/netdev.c b/drivers/net/igbvf/netdev.c
index 91024a3..fad7f34 100644
--- a/drivers/net/igbvf/netdev.c
+++ b/drivers/net/igbvf/netdev.c
@@ -170,18 +170,12 @@
 		}
 
 		if (!buffer_info->skb) {
-			skb = netdev_alloc_skb(netdev, bufsz + NET_IP_ALIGN);
+			skb = netdev_alloc_skb_ip_align(netdev, bufsz);
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
 			}
 
-			/* Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
-
 			buffer_info->skb = skb;
 			buffer_info->dma = pci_map_single(pdev, skb->data,
 			                                  bufsz,
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9f7b5d4..63056e7 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -738,17 +738,12 @@
 
 	IPG_DEBUG_MSG("_get_rxbuff\n");
 
-	skb = netdev_alloc_skb(dev, sp->rxsupport_size + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(dev, sp->rxsupport_size);
 	if (!skb) {
 		sp->rx_buff[entry] = NULL;
 		return -ENOMEM;
 	}
 
-	/* Adjust the data start location within the buffer to
-	 * align IP address field to a 16 byte boundary.
-	 */
-	skb_reserve(skb, NET_IP_ALIGN);
-
 	/* Associate the receive buffer with the IPG NIC. */
 	skb->dev = dev;
 
diff --git a/drivers/net/irda/kingsun-sir.c b/drivers/net/irda/kingsun-sir.c
index 2fc30b4..cb90d64 100644
--- a/drivers/net/irda/kingsun-sir.c
+++ b/drivers/net/irda/kingsun-sir.c
@@ -66,7 +66,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/ks959-sir.c b/drivers/net/irda/ks959-sir.c
index f4d13fc..b54d3b4 100644
--- a/drivers/net/irda/ks959-sir.c
+++ b/drivers/net/irda/ks959-sir.c
@@ -118,7 +118,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/ksdazzle-sir.c b/drivers/net/irda/ksdazzle-sir.c
index 5f9d733..8d713eb 100644
--- a/drivers/net/irda/ksdazzle-sir.c
+++ b/drivers/net/irda/ksdazzle-sir.c
@@ -82,7 +82,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/mcs7780.c b/drivers/net/irda/mcs7780.c
index b3d30bc..c0e0bb9 100644
--- a/drivers/net/irda/mcs7780.c
+++ b/drivers/net/irda/mcs7780.c
@@ -50,7 +50,6 @@
 #include <linux/errno.h>
 #include <linux/init.h>
 #include <linux/slab.h>
-#include <linux/kref.h>
 #include <linux/usb.h>
 #include <linux/device.h>
 #include <linux/crc32.h>
diff --git a/drivers/net/irda/pxaficp_ir.c b/drivers/net/irda/pxaficp_ir.c
index 1445e58..84db145 100644
--- a/drivers/net/irda/pxaficp_ir.c
+++ b/drivers/net/irda/pxaficp_ir.c
@@ -17,6 +17,7 @@
 #include <linux/etherdevice.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <net/irda/irda.h>
 #include <net/irda/irmod.h>
@@ -163,6 +164,22 @@
 }
 
 /*
+ * Set the IrDA communications mode.
+ */
+static void pxa_irda_set_mode(struct pxa_irda *si, int mode)
+{
+	if (si->pdata->transceiver_mode)
+		si->pdata->transceiver_mode(si->dev, mode);
+	else {
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_set_value(si->pdata->gpio_pwdown,
+					!(mode & IR_OFF) ^
+					!si->pdata->gpio_pwdown_inverted);
+		pxa2xx_transceiver_mode(si->dev, mode);
+	}
+}
+
+/*
  * Set the IrDA communications speed.
  */
 static int pxa_irda_set_speed(struct pxa_irda *si, int speed)
@@ -188,7 +205,7 @@
 			pxa_irda_disable_clk(si);
 
 			/* set board transceiver to SIR mode */
-			si->pdata->transceiver_mode(si->dev, IR_SIRMODE);
+			pxa_irda_set_mode(si, IR_SIRMODE);
 
 			/* enable the STUART clock */
 			pxa_irda_enable_sirclk(si);
@@ -222,7 +239,7 @@
 		ICCR0 = 0;
 
 		/* set board transceiver to FIR mode */
-		si->pdata->transceiver_mode(si->dev, IR_FIRMODE);
+		pxa_irda_set_mode(si, IR_FIRMODE);
 
 		/* enable the FICP clock */
 		pxa_irda_enable_firclk(si);
@@ -641,7 +658,7 @@
 	local_irq_restore(flags);
 
 	/* power off board transceiver */
-	si->pdata->transceiver_mode(si->dev, IR_OFF);
+	pxa_irda_set_mode(si, IR_OFF);
 
 	printk(KERN_DEBUG "pxa_ir: irda shutdown\n");
 }
@@ -849,10 +866,26 @@
 	if (err)
 		goto err_mem_5;
 
-	if (si->pdata->startup)
+	if (gpio_is_valid(si->pdata->gpio_pwdown)) {
+		err = gpio_request(si->pdata->gpio_pwdown, "IrDA switch");
+		if (err)
+			goto err_startup;
+		err = gpio_direction_output(si->pdata->gpio_pwdown,
+					!si->pdata->gpio_pwdown_inverted);
+		if (err) {
+			gpio_free(si->pdata->gpio_pwdown);
+			goto err_startup;
+		}
+	}
+
+	if (si->pdata->startup) {
 		err = si->pdata->startup(si->dev);
-	if (err)
-		goto err_startup;
+		if (err)
+			goto err_startup;
+	}
+
+	if (gpio_is_valid(si->pdata->gpio_pwdown) && si->pdata->startup)
+		dev_warn(si->dev, "gpio_pwdown and startup() both defined!\n");
 
 	dev->netdev_ops = &pxa_irda_netdev_ops;
 
@@ -903,6 +936,8 @@
 	if (dev) {
 		struct pxa_irda *si = netdev_priv(dev);
 		unregister_netdev(dev);
+		if (gpio_is_valid(si->pdata->gpio_pwdown))
+			gpio_free(si->pdata->gpio_pwdown);
 		if (si->pdata->shutdown)
 			si->pdata->shutdown(si->dev);
 		kfree(si->tx_buff.head);
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index d85717e..e95d9b6 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -183,7 +183,6 @@
 	struct napi_struct napi;
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	/* structs defined in ixgb_hw.h */
 	struct ixgb_hw hw;
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 288ee1d..a4ed96c 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -34,38 +34,46 @@
 
 #define IXGB_ALL_RAR_ENTRIES 16
 
+enum {NETDEV_STATS, IXGB_STATS};
+
 struct ixgb_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define IXGB_STAT(m) FIELD_SIZEOF(struct ixgb_adapter, m), \
-		      offsetof(struct ixgb_adapter, m)
-static struct ixgb_stats ixgb_gstrings_stats[] = {
-	{"rx_packets", IXGB_STAT(net_stats.rx_packets)},
-	{"tx_packets", IXGB_STAT(net_stats.tx_packets)},
-	{"rx_bytes", IXGB_STAT(net_stats.rx_bytes)},
-	{"tx_bytes", IXGB_STAT(net_stats.tx_bytes)},
-	{"rx_errors", IXGB_STAT(net_stats.rx_errors)},
-	{"tx_errors", IXGB_STAT(net_stats.tx_errors)},
-	{"rx_dropped", IXGB_STAT(net_stats.rx_dropped)},
-	{"tx_dropped", IXGB_STAT(net_stats.tx_dropped)},
-	{"multicast", IXGB_STAT(net_stats.multicast)},
-	{"collisions", IXGB_STAT(net_stats.collisions)},
+#define IXGB_STAT(m)		IXGB_STATS, \
+				FIELD_SIZEOF(struct ixgb_adapter, m), \
+				offsetof(struct ixgb_adapter, m)
+#define IXGB_NETDEV_STAT(m)	NETDEV_STATS, \
+				FIELD_SIZEOF(struct net_device, m), \
+				offsetof(struct net_device, m)
 
-/*	{ "rx_length_errors", IXGB_STAT(net_stats.rx_length_errors) },	*/
-	{"rx_over_errors", IXGB_STAT(net_stats.rx_over_errors)},
-	{"rx_crc_errors", IXGB_STAT(net_stats.rx_crc_errors)},
-	{"rx_frame_errors", IXGB_STAT(net_stats.rx_frame_errors)},
+static struct ixgb_stats ixgb_gstrings_stats[] = {
+	{"rx_packets", IXGB_NETDEV_STAT(stats.rx_packets)},
+	{"tx_packets", IXGB_NETDEV_STAT(stats.tx_packets)},
+	{"rx_bytes", IXGB_NETDEV_STAT(stats.rx_bytes)},
+	{"tx_bytes", IXGB_NETDEV_STAT(stats.tx_bytes)},
+	{"rx_errors", IXGB_NETDEV_STAT(stats.rx_errors)},
+	{"tx_errors", IXGB_NETDEV_STAT(stats.tx_errors)},
+	{"rx_dropped", IXGB_NETDEV_STAT(stats.rx_dropped)},
+	{"tx_dropped", IXGB_NETDEV_STAT(stats.tx_dropped)},
+	{"multicast", IXGB_NETDEV_STAT(stats.multicast)},
+	{"collisions", IXGB_NETDEV_STAT(stats.collisions)},
+
+/*	{ "rx_length_errors", IXGB_NETDEV_STAT(stats.rx_length_errors) },	*/
+	{"rx_over_errors", IXGB_NETDEV_STAT(stats.rx_over_errors)},
+	{"rx_crc_errors", IXGB_NETDEV_STAT(stats.rx_crc_errors)},
+	{"rx_frame_errors", IXGB_NETDEV_STAT(stats.rx_frame_errors)},
 	{"rx_no_buffer_count", IXGB_STAT(stats.rnbc)},
-	{"rx_fifo_errors", IXGB_STAT(net_stats.rx_fifo_errors)},
-	{"rx_missed_errors", IXGB_STAT(net_stats.rx_missed_errors)},
-	{"tx_aborted_errors", IXGB_STAT(net_stats.tx_aborted_errors)},
-	{"tx_carrier_errors", IXGB_STAT(net_stats.tx_carrier_errors)},
-	{"tx_fifo_errors", IXGB_STAT(net_stats.tx_fifo_errors)},
-	{"tx_heartbeat_errors", IXGB_STAT(net_stats.tx_heartbeat_errors)},
-	{"tx_window_errors", IXGB_STAT(net_stats.tx_window_errors)},
+	{"rx_fifo_errors", IXGB_NETDEV_STAT(stats.rx_fifo_errors)},
+	{"rx_missed_errors", IXGB_NETDEV_STAT(stats.rx_missed_errors)},
+	{"tx_aborted_errors", IXGB_NETDEV_STAT(stats.tx_aborted_errors)},
+	{"tx_carrier_errors", IXGB_NETDEV_STAT(stats.tx_carrier_errors)},
+	{"tx_fifo_errors", IXGB_NETDEV_STAT(stats.tx_fifo_errors)},
+	{"tx_heartbeat_errors", IXGB_NETDEV_STAT(stats.tx_heartbeat_errors)},
+	{"tx_window_errors", IXGB_NETDEV_STAT(stats.tx_window_errors)},
 	{"tx_deferred_ok", IXGB_STAT(stats.dc)},
 	{"tx_timeout_count", IXGB_STAT(tx_timeout_count) },
 	{"tx_restart_queue", IXGB_STAT(restart_queue) },
@@ -662,10 +670,21 @@
 {
 	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int i;
+	char *p = NULL;
 
 	ixgb_update_stats(adapter);
 	for (i = 0; i < IXGB_STATS_LEN; i++) {
-		char *p = (char *)adapter+ixgb_gstrings_stats[i].stat_offset;
+		switch (ixgb_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					ixgb_gstrings_stats[i].stat_offset;
+			break;
+		case IXGB_STATS:
+			p = (char *) adapter +
+					ixgb_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (ixgb_gstrings_stats[i].sizeof_stat ==
 			sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 8aa44dc..1bd0ca1 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -1537,9 +1537,7 @@
 static struct net_device_stats *
 ixgb_get_stats(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev_priv(netdev);
-
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -1676,16 +1674,16 @@
 
 	/* Fill out the OS statistics structure */
 
-	adapter->net_stats.rx_packets = adapter->stats.gprcl;
-	adapter->net_stats.tx_packets = adapter->stats.gptcl;
-	adapter->net_stats.rx_bytes = adapter->stats.gorcl;
-	adapter->net_stats.tx_bytes = adapter->stats.gotcl;
-	adapter->net_stats.multicast = adapter->stats.mprcl;
-	adapter->net_stats.collisions = 0;
+	netdev->stats.rx_packets = adapter->stats.gprcl;
+	netdev->stats.tx_packets = adapter->stats.gptcl;
+	netdev->stats.rx_bytes = adapter->stats.gorcl;
+	netdev->stats.tx_bytes = adapter->stats.gotcl;
+	netdev->stats.multicast = adapter->stats.mprcl;
+	netdev->stats.collisions = 0;
 
 	/* ignore RLEC as it reports errors for padded (<64bytes) frames
 	 * with a length in the type/len field */
-	adapter->net_stats.rx_errors =
+	netdev->stats.rx_errors =
 	    /* adapter->stats.rnbc + */ adapter->stats.crcerrs +
 	    adapter->stats.ruc +
 	    adapter->stats.roc /*+ adapter->stats.rlec */  +
@@ -1693,21 +1691,21 @@
 	    adapter->stats.ecbc + adapter->stats.mpc;
 
 	/* see above
-	 * adapter->net_stats.rx_length_errors = adapter->stats.rlec;
+	 * netdev->stats.rx_length_errors = adapter->stats.rlec;
 	 */
 
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_fifo_errors = adapter->stats.mpc;
-	adapter->net_stats.rx_missed_errors = adapter->stats.mpc;
-	adapter->net_stats.rx_over_errors = adapter->stats.mpc;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_fifo_errors = adapter->stats.mpc;
+	netdev->stats.rx_missed_errors = adapter->stats.mpc;
+	netdev->stats.rx_over_errors = adapter->stats.mpc;
 
-	adapter->net_stats.tx_errors = 0;
-	adapter->net_stats.rx_frame_errors = 0;
-	adapter->net_stats.tx_aborted_errors = 0;
-	adapter->net_stats.tx_carrier_errors = 0;
-	adapter->net_stats.tx_fifo_errors = 0;
-	adapter->net_stats.tx_heartbeat_errors = 0;
-	adapter->net_stats.tx_window_errors = 0;
+	netdev->stats.tx_errors = 0;
+	netdev->stats.rx_frame_errors = 0;
+	netdev->stats.tx_aborted_errors = 0;
+	netdev->stats.tx_carrier_errors = 0;
+	netdev->stats.tx_fifo_errors = 0;
+	netdev->stats.tx_heartbeat_errors = 0;
+	netdev->stats.tx_window_errors = 0;
 }
 
 #define IXGB_MAX_INTR 10
@@ -1974,9 +1972,8 @@
 		 * of reassembly being done in the stack */
 		if (length < copybreak) {
 			struct sk_buff *new_skb =
-			    netdev_alloc_skb(netdev, length + NET_IP_ALIGN);
+			    netdev_alloc_skb_ip_align(netdev, length);
 			if (new_skb) {
-				skb_reserve(new_skb, NET_IP_ALIGN);
 				skb_copy_to_linear_data_offset(new_skb,
 							       -NET_IP_ALIGN,
 							       (skb->data -
@@ -2059,20 +2056,13 @@
 			goto map_skb;
 		}
 
-		skb = netdev_alloc_skb(netdev, adapter->rx_buffer_len
-			               + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(netdev, adapter->rx_buffer_len);
 		if (unlikely(!skb)) {
 			/* Better luck next round */
 			adapter->alloc_rx_buff_failed++;
 			break;
 		}
 
-		/* Make buffer alignment 2 beyond a 16 byte boundary
-		 * this will result in a 16 byte aligned IP header after
-		 * the 14 byte MAC header is removed
-		 */
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		buffer_info->skb = skb;
 		buffer_info->length = adapter->rx_buffer_len;
 map_skb:
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 385be60..7eb08a6 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -340,7 +340,6 @@
 	/* OS defined structs */
 	struct net_device *netdev;
 	struct pci_dev *pdev;
-	struct net_device_stats net_stats;
 
 	u32 test_icr;
 	struct ixgbe_ring test_tx_ring;
@@ -397,7 +396,7 @@
 extern struct ixgbe_info ixgbe_82598_info;
 extern struct ixgbe_info ixgbe_82599_info;
 #ifdef CONFIG_IXGBE_DCB
-extern struct dcbnl_rtnl_ops dcbnl_ops;
+extern const struct dcbnl_rtnl_ops dcbnl_ops;
 extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg,
                               struct ixgbe_dcb_config *dst_dcb_cfg,
                               int tc_max);
@@ -458,6 +457,7 @@
 extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter);
 extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up);
 #endif /* CONFIG_IXGBE_DCB */
+extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type);
 #endif /* IXGBE_FCOE */
 
 #endif /* _IXGBE_H_ */
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 34b0492..7210689 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -42,6 +42,10 @@
                                           ixgbe_link_speed speed,
                                           bool autoneg,
                                           bool autoneg_wait_to_complete);
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+                                           ixgbe_link_speed speed,
+                                           bool autoneg,
+                                           bool autoneg_wait_to_complete);
 s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
                                bool autoneg_wait_to_complete);
 s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
@@ -64,7 +68,13 @@
 		/* Set up dual speed SFP+ support */
 		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
 	} else {
-		mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
+		if ((mac->ops.get_media_type(hw) ==
+		     ixgbe_media_type_backplane) &&
+		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
+		     hw->phy.smart_speed == ixgbe_smart_speed_on))
+			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
+		else
+			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
 	}
 }
 
@@ -337,6 +347,7 @@
 		media_type = ixgbe_media_type_backplane;
 		break;
 	case IXGBE_DEV_ID_82599_SFP:
+	case IXGBE_DEV_ID_82599_SFP_EM:
 		media_type = ixgbe_media_type_fiber;
 		break;
 	case IXGBE_DEV_ID_82599_CX4:
@@ -479,7 +490,12 @@
 			hw->mac.autotry_restart = false;
 		}
 
-		/* The controller may take up to 500ms at 10g to acquire link */
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted.  82599 uses the same timing for 10g SFI.
+		 */
+
 		for (i = 0; i < 5; i++) {
 			/* Wait for the link partner to also set speed */
 			msleep(100);
@@ -567,6 +583,111 @@
 }
 
 /**
+ *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: true if autonegotiation enabled
+ *  @autoneg_wait_to_complete: true when waiting for completion is needed
+ *
+ *  Implements the Intel SmartSpeed algorithm.
+ **/
+static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	s32 status = 0;
+	ixgbe_link_speed link_speed;
+	s32 i, j;
+	bool link_up = false;
+	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	hw_dbg(hw, "ixgbe_setup_mac_link_smartspeed.\n");
+
+	 /* Set autoneg_advertised value based on input link speed */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+
+	if (speed & IXGBE_LINK_SPEED_100_FULL)
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
+
+	/*
+	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
+	 * autoneg advertisement if link is unable to be established at the
+	 * highest negotiated rate.  This can sometimes happen due to integrity
+	 * issues with the physical media connection.
+	 */
+
+	/* First, try to get link with full advertisement */
+	hw->phy.smart_speed_active = false;
+	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
+		status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+						    autoneg_wait_to_complete);
+		if (status)
+			goto out;
+
+		/*
+		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
+		 * Section 73.10.2, we may have to wait up to 500ms if KR is
+		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
+		 * Table 9 in the AN MAS.
+		 */
+		for (i = 0; i < 5; i++) {
+			mdelay(100);
+
+			/* If we have link, just jump out */
+			hw->mac.ops.check_link(hw, &link_speed,
+			                       &link_up, false);
+			if (link_up)
+				goto out;
+		}
+	}
+
+	/*
+	 * We didn't get link.  If we advertised KR plus one of KX4/KX
+	 * (or BX4/BX), then disable KR and try again.
+	 */
+	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
+	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
+		goto out;
+
+	/* Turn SmartSpeed on to disable KR support */
+	hw->phy.smart_speed_active = true;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+	if (status)
+		goto out;
+
+	/*
+	 * Wait for the controller to acquire link.  600ms will allow for
+	 * the AN link_fail_inhibit_timer as well for multiple cycles of
+	 * parallel detect, both 10g and 1g. This allows for the maximum
+	 * connect attempts as defined in the AN MAS table 73-7.
+	 */
+	for (i = 0; i < 6; i++) {
+		mdelay(100);
+
+		/* If we have link, just jump out */
+		hw->mac.ops.check_link(hw, &link_speed,
+		                       &link_up, false);
+		if (link_up)
+			goto out;
+	}
+
+	/* We didn't get link.  Turn SmartSpeed back off. */
+	hw->phy.smart_speed_active = false;
+	status = ixgbe_setup_mac_link_82599(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+
+out:
+	return status;
+}
+
+/**
  *  ixgbe_check_mac_link_82599 - Determine link and speed status
  *  @hw: pointer to hardware structure
  *  @speed: pointer to link speed
@@ -669,7 +790,8 @@
 		if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 				autoc |= IXGBE_AUTOC_KX4_SUPP;
-			if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
+			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
+			    (hw->phy.smart_speed_active == false))
 				autoc |= IXGBE_AUTOC_KR_SUPP;
 		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 			autoc |= IXGBE_AUTOC_KX_SUPP;
@@ -878,6 +1000,10 @@
 		hw->mac.num_rar_entries--;
 	}
 
+	/* Store the alternative WWNN/WWPN prefix */
+	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
+	                               &hw->mac.wwpn_prefix);
+
 reset_hw_out:
 	return status;
 }
@@ -2414,6 +2540,51 @@
 	return status;
 }
 
+/**
+ *  ixgbe_get_wwn_prefix_82599 - Get alternative WWNN/WWPN prefix from
+ *  the EEPROM
+ *  @hw: pointer to hardware structure
+ *  @wwnn_prefix: the alternative WWNN prefix
+ *  @wwpn_prefix: the alternative WWPN prefix
+ *
+ *  This function will read the EEPROM from the alternative SAN MAC address
+ *  block to check the support for the alternative WWNN/WWPN prefix support.
+ **/
+static s32 ixgbe_get_wwn_prefix_82599(struct ixgbe_hw *hw, u16 *wwnn_prefix,
+                                      u16 *wwpn_prefix)
+{
+	u16 offset, caps;
+	u16 alt_san_mac_blk_offset;
+
+	/* clear output first */
+	*wwnn_prefix = 0xFFFF;
+	*wwpn_prefix = 0xFFFF;
+
+	/* check if alternative SAN MAC is supported */
+	hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR,
+	                    &alt_san_mac_blk_offset);
+
+	if ((alt_san_mac_blk_offset == 0) ||
+	    (alt_san_mac_blk_offset == 0xFFFF))
+		goto wwn_prefix_out;
+
+	/* check capability in alternative san mac address block */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET;
+	hw->eeprom.ops.read(hw, offset, &caps);
+	if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN))
+		goto wwn_prefix_out;
+
+	/* get the corresponding prefix for WWNN/WWPN */
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwnn_prefix);
+
+	offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET;
+	hw->eeprom.ops.read(hw, offset, wwpn_prefix);
+
+wwn_prefix_out:
+	return 0;
+}
+
 static struct ixgbe_mac_operations mac_ops_82599 = {
 	.init_hw                = &ixgbe_init_hw_generic,
 	.reset_hw               = &ixgbe_reset_hw_82599,
@@ -2425,6 +2596,7 @@
 	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
 	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_82599,
 	.get_device_caps        = &ixgbe_get_device_caps_82599,
+	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_82599,
 	.stop_adapter           = &ixgbe_stop_adapter_generic,
 	.get_bus_info           = &ixgbe_get_bus_info_generic,
 	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index a6bc1ef..3c7a79a 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -563,7 +563,7 @@
 	return rval;
 }
 
-struct dcbnl_rtnl_ops dcbnl_ops = {
+const struct dcbnl_rtnl_ops dcbnl_ops = {
 	.getstate	= ixgbe_dcbnl_get_state,
 	.setstate	= ixgbe_dcbnl_set_state,
 	.getpermhwaddr	= ixgbe_dcbnl_get_perm_hw_addr,
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 856c18c..9d2cc83 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -40,19 +40,27 @@
 
 #define IXGBE_ALL_RAR_ENTRIES 16
 
+enum {NETDEV_STATS, IXGBE_STATS};
+
 struct ixgbe_stats {
 	char stat_string[ETH_GSTRING_LEN];
+	int type;
 	int sizeof_stat;
 	int stat_offset;
 };
 
-#define IXGBE_STAT(m) sizeof(((struct ixgbe_adapter *)0)->m), \
-                             offsetof(struct ixgbe_adapter, m)
+#define IXGBE_STAT(m)		IXGBE_STATS, \
+				sizeof(((struct ixgbe_adapter *)0)->m), \
+				offsetof(struct ixgbe_adapter, m)
+#define IXGBE_NETDEV_STAT(m)	NETDEV_STATS, \
+				sizeof(((struct net_device *)0)->m), \
+				offsetof(struct net_device, m)
+
 static struct ixgbe_stats ixgbe_gstrings_stats[] = {
-	{"rx_packets", IXGBE_STAT(net_stats.rx_packets)},
-	{"tx_packets", IXGBE_STAT(net_stats.tx_packets)},
-	{"rx_bytes", IXGBE_STAT(net_stats.rx_bytes)},
-	{"tx_bytes", IXGBE_STAT(net_stats.tx_bytes)},
+	{"rx_packets", IXGBE_NETDEV_STAT(stats.rx_packets)},
+	{"tx_packets", IXGBE_NETDEV_STAT(stats.tx_packets)},
+	{"rx_bytes", IXGBE_NETDEV_STAT(stats.rx_bytes)},
+	{"tx_bytes", IXGBE_NETDEV_STAT(stats.tx_bytes)},
 	{"rx_pkts_nic", IXGBE_STAT(stats.gprc)},
 	{"tx_pkts_nic", IXGBE_STAT(stats.gptc)},
 	{"rx_bytes_nic", IXGBE_STAT(stats.gorc)},
@@ -60,26 +68,26 @@
 	{"lsc_int", IXGBE_STAT(lsc_int)},
 	{"tx_busy", IXGBE_STAT(tx_busy)},
 	{"non_eop_descs", IXGBE_STAT(non_eop_descs)},
-	{"rx_errors", IXGBE_STAT(net_stats.rx_errors)},
-	{"tx_errors", IXGBE_STAT(net_stats.tx_errors)},
-	{"rx_dropped", IXGBE_STAT(net_stats.rx_dropped)},
-	{"tx_dropped", IXGBE_STAT(net_stats.tx_dropped)},
-	{"multicast", IXGBE_STAT(net_stats.multicast)},
+	{"rx_errors", IXGBE_NETDEV_STAT(stats.rx_errors)},
+	{"tx_errors", IXGBE_NETDEV_STAT(stats.tx_errors)},
+	{"rx_dropped", IXGBE_NETDEV_STAT(stats.rx_dropped)},
+	{"tx_dropped", IXGBE_NETDEV_STAT(stats.tx_dropped)},
+	{"multicast", IXGBE_NETDEV_STAT(stats.multicast)},
 	{"broadcast", IXGBE_STAT(stats.bprc)},
 	{"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) },
-	{"collisions", IXGBE_STAT(net_stats.collisions)},
-	{"rx_over_errors", IXGBE_STAT(net_stats.rx_over_errors)},
-	{"rx_crc_errors", IXGBE_STAT(net_stats.rx_crc_errors)},
-	{"rx_frame_errors", IXGBE_STAT(net_stats.rx_frame_errors)},
+	{"collisions", IXGBE_NETDEV_STAT(stats.collisions)},
+	{"rx_over_errors", IXGBE_NETDEV_STAT(stats.rx_over_errors)},
+	{"rx_crc_errors", IXGBE_NETDEV_STAT(stats.rx_crc_errors)},
+	{"rx_frame_errors", IXGBE_NETDEV_STAT(stats.rx_frame_errors)},
 	{"hw_rsc_count", IXGBE_STAT(rsc_count)},
 	{"fdir_match", IXGBE_STAT(stats.fdirmatch)},
 	{"fdir_miss", IXGBE_STAT(stats.fdirmiss)},
-	{"rx_fifo_errors", IXGBE_STAT(net_stats.rx_fifo_errors)},
-	{"rx_missed_errors", IXGBE_STAT(net_stats.rx_missed_errors)},
-	{"tx_aborted_errors", IXGBE_STAT(net_stats.tx_aborted_errors)},
-	{"tx_carrier_errors", IXGBE_STAT(net_stats.tx_carrier_errors)},
-	{"tx_fifo_errors", IXGBE_STAT(net_stats.tx_fifo_errors)},
-	{"tx_heartbeat_errors", IXGBE_STAT(net_stats.tx_heartbeat_errors)},
+	{"rx_fifo_errors", IXGBE_NETDEV_STAT(stats.rx_fifo_errors)},
+	{"rx_missed_errors", IXGBE_NETDEV_STAT(stats.rx_missed_errors)},
+	{"tx_aborted_errors", IXGBE_NETDEV_STAT(stats.tx_aborted_errors)},
+	{"tx_carrier_errors", IXGBE_NETDEV_STAT(stats.tx_carrier_errors)},
+	{"tx_fifo_errors", IXGBE_NETDEV_STAT(stats.tx_fifo_errors)},
+	{"tx_heartbeat_errors", IXGBE_NETDEV_STAT(stats.tx_heartbeat_errors)},
 	{"tx_timeout_count", IXGBE_STAT(tx_timeout_count)},
 	{"tx_restart_queue", IXGBE_STAT(restart_queue)},
 	{"rx_long_length_errors", IXGBE_STAT(stats.roc)},
@@ -933,10 +941,21 @@
 	int stat_count = sizeof(struct ixgbe_queue_stats) / sizeof(u64);
 	int j, k;
 	int i;
+	char *p = NULL;
 
 	ixgbe_update_stats(adapter);
 	for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) {
-		char *p = (char *)adapter + ixgbe_gstrings_stats[i].stat_offset;
+		switch (ixgbe_gstrings_stats[i].type) {
+		case NETDEV_STATS:
+			p = (char *) netdev +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		case IXGBE_STATS:
+			p = (char *) adapter +
+					ixgbe_gstrings_stats[i].stat_offset;
+			break;
+		}
+
 		data[i] = (ixgbe_gstrings_stats[i].sizeof_stat ==
 		           sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
 	}
diff --git a/drivers/net/ixgbe/ixgbe_fcoe.c b/drivers/net/ixgbe/ixgbe_fcoe.c
index a3c9f99..edecdc8 100644
--- a/drivers/net/ixgbe/ixgbe_fcoe.c
+++ b/drivers/net/ixgbe/ixgbe_fcoe.c
@@ -718,3 +718,49 @@
 	return 1;
 }
 #endif /* CONFIG_IXGBE_DCB */
+
+/**
+ * ixgbe_fcoe_get_wwn - get world wide name for the node or the port
+ * @netdev : ixgbe adapter
+ * @wwn : the world wide name
+ * @type: the type of world wide name
+ *
+ * Returns the node or port world wide name if both the prefix and the san
+ * mac address are valid, then the wwn is formed based on the NAA-2 for
+ * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3).
+ *
+ * Returns : 0 on success
+ */
+int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type)
+{
+	int rc = -EINVAL;
+	u16 prefix = 0xffff;
+	struct ixgbe_adapter *adapter = netdev_priv(netdev);
+	struct ixgbe_mac_info *mac = &adapter->hw.mac;
+
+	switch (type) {
+	case NETDEV_FCOE_WWNN:
+		prefix = mac->wwnn_prefix;
+		break;
+	case NETDEV_FCOE_WWPN:
+		prefix = mac->wwpn_prefix;
+		break;
+	default:
+		break;
+	}
+
+	if ((prefix != 0xffff) &&
+	    is_valid_ether_addr(mac->san_addr)) {
+		*wwn = ((u64) prefix << 48) |
+		       ((u64) mac->san_addr[0] << 40) |
+		       ((u64) mac->san_addr[1] << 32) |
+		       ((u64) mac->san_addr[2] << 24) |
+		       ((u64) mac->san_addr[3] << 16) |
+		       ((u64) mac->san_addr[4] << 8)  |
+		       ((u64) mac->san_addr[5]);
+		rc = 0;
+	}
+	return rc;
+}
+
+
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index cbb143c..45c5faf 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -97,6 +97,8 @@
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP),
 	 board_82599 },
+	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM),
+	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ),
 	 board_82599 },
 	{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4),
@@ -372,8 +374,8 @@
 	tx_ring->total_packets += total_packets;
 	tx_ring->stats.packets += total_packets;
 	tx_ring->stats.bytes += total_bytes;
-	adapter->net_stats.tx_bytes += total_bytes;
-	adapter->net_stats.tx_packets += total_packets;
+	netdev->stats.tx_bytes += total_bytes;
+	netdev->stats.tx_packets += total_packets;
 	return (count < tx_ring->work_limit);
 }
 
@@ -614,22 +616,14 @@
 
 		if (!bi->skb) {
 			struct sk_buff *skb;
-			skb = netdev_alloc_skb(adapter->netdev,
-			                       (rx_ring->rx_buf_len +
-			                        NET_IP_ALIGN));
+			skb = netdev_alloc_skb_ip_align(adapter->netdev,
+							rx_ring->rx_buf_len);
 
 			if (!skb) {
 				adapter->alloc_rx_buff_failed++;
 				goto no_buffers;
 			}
 
-			/*
-			 * Make buffer alignment 2 beyond a 16 byte boundary
-			 * this will result in a 16 byte aligned IP header after
-			 * the 14 byte MAC header is removed
-			 */
-			skb_reserve(skb, NET_IP_ALIGN);
-
 			bi->skb = skb;
 			bi->dma = pci_map_single(pdev, skb->data,
 			                         rx_ring->rx_buf_len,
@@ -709,6 +703,7 @@
                                int *work_done, int work_to_do)
 {
 	struct ixgbe_adapter *adapter = q_vector->adapter;
+	struct net_device *netdev = adapter->netdev;
 	struct pci_dev *pdev = adapter->pdev;
 	union ixgbe_adv_rx_desc *rx_desc, *next_rxd;
 	struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer;
@@ -880,8 +875,8 @@
 
 	rx_ring->total_packets += total_rx_packets;
 	rx_ring->total_bytes += total_rx_bytes;
-	adapter->net_stats.rx_bytes += total_rx_bytes;
-	adapter->net_stats.rx_packets += total_rx_packets;
+	netdev->stats.rx_bytes += total_rx_bytes;
+	netdev->stats.rx_packets += total_rx_packets;
 
 	return cleaned;
 }
@@ -4403,6 +4398,7 @@
  **/
 void ixgbe_update_stats(struct ixgbe_adapter *adapter)
 {
+	struct net_device *netdev = adapter->netdev;
 	struct ixgbe_hw *hw = &adapter->hw;
 	u64 total_mpc = 0;
 	u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot;
@@ -4522,15 +4518,15 @@
 	adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
 
 	/* Fill out the OS statistics structure */
-	adapter->net_stats.multicast = adapter->stats.mprc;
+	netdev->stats.multicast = adapter->stats.mprc;
 
 	/* Rx Errors */
-	adapter->net_stats.rx_errors = adapter->stats.crcerrs +
+	netdev->stats.rx_errors = adapter->stats.crcerrs +
 	                               adapter->stats.rlec;
-	adapter->net_stats.rx_dropped = 0;
-	adapter->net_stats.rx_length_errors = adapter->stats.rlec;
-	adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs;
-	adapter->net_stats.rx_missed_errors = total_mpc;
+	netdev->stats.rx_dropped = 0;
+	netdev->stats.rx_length_errors = adapter->stats.rlec;
+	netdev->stats.rx_crc_errors = adapter->stats.crcerrs;
+	netdev->stats.rx_missed_errors = total_mpc;
 }
 
 /**
@@ -5300,10 +5296,8 @@
  **/
 static struct net_device_stats *ixgbe_get_stats(struct net_device *netdev)
 {
-	struct ixgbe_adapter *adapter = netdev_priv(netdev);
-
 	/* only return the current stats */
-	return &adapter->net_stats;
+	return &netdev->stats;
 }
 
 /**
@@ -5455,6 +5449,7 @@
 	.ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put,
 	.ndo_fcoe_enable = ixgbe_fcoe_enable,
 	.ndo_fcoe_disable = ixgbe_fcoe_disable,
+	.ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn,
 #endif /* IXGBE_FCOE */
 };
 
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index ef4bdd5..21b6633da 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -52,6 +52,7 @@
 #define IXGBE_DEV_ID_82599_KX4_MEZZ      0x1514
 #define IXGBE_DEV_ID_82599_CX4           0x10F9
 #define IXGBE_DEV_ID_82599_SFP           0x10FB
+#define IXGBE_DEV_ID_82599_SFP_EM        0x1507
 #define IXGBE_DEV_ID_82599_XAUI_LOM      0x10FC
 #define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8
 
@@ -1538,6 +1539,16 @@
 #define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR   0x4
 #define IXGBE_FW_PATCH_VERSION_4   0x7
 
+/* Alternative SAN MAC Address Block */
+#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR      0x27 /* Alt. SAN MAC block */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET  0x0 /* Alt. SAN MAC capability */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET  0x7 /* Alt. WWNN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET  0x8 /* Alt. WWPN prefix offset */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC  0x0 /* Alt. SAN MAC exists */
+#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN  0x1 /* Alt. WWN base exists */
+
 /* PCI Bus Info */
 #define IXGBE_PCI_LINK_STATUS     0xB2
 #define IXGBE_PCI_DEVICE_CONTROL2 0xC8
@@ -2171,6 +2182,14 @@
 	ixgbe_fc_default
 };
 
+/* Smart Speed Settings */
+#define IXGBE_SMARTSPEED_MAX_RETRIES	3
+enum ixgbe_smart_speed {
+	ixgbe_smart_speed_auto = 0,
+	ixgbe_smart_speed_on,
+	ixgbe_smart_speed_off
+};
+
 /* PCI bus types */
 enum ixgbe_bus_type {
 	ixgbe_bus_type_unknown = 0,
@@ -2336,6 +2355,7 @@
 	s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *);
 	s32 (*get_device_caps)(struct ixgbe_hw *, u16 *);
+	s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *);
 	s32 (*stop_adapter)(struct ixgbe_hw *);
 	s32 (*get_bus_info)(struct ixgbe_hw *);
 	void (*set_lan_id)(struct ixgbe_hw *);
@@ -2407,6 +2427,10 @@
 	u8                              addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
 	u8                              san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	/* prefix for World Wide Node Name (WWNN) */
+	u16                             wwnn_prefix;
+	/* prefix for World Wide Port Name (WWPN) */
+	u16                             wwpn_prefix;
 	s32                             mc_filter_type;
 	u32                             mcft_size;
 	u32                             vft_size;
@@ -2431,6 +2455,8 @@
 	enum ixgbe_media_type           media_type;
 	bool                            reset_disable;
 	ixgbe_autoneg_advertised        autoneg_advertised;
+	enum ixgbe_smart_speed          smart_speed;
+	bool                            smart_speed_active;
 	bool                            multispeed_fiber;
 };
 
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 9aee0cc..e9d9d59 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -109,9 +109,8 @@
 		if (unlikely(!netif_running(nds[desc->channel])))
 			goto err;
 
-		skb = netdev_alloc_skb(dev, desc->pkt_length + 2);
+		skb = netdev_alloc_skb_ip_align(dev, desc->pkt_length);
 		if (likely(skb != NULL)) {
-			skb_reserve(skb, 2);
 			skb_copy_to_linear_data(skb, buf, desc->pkt_length);
 			skb_put(skb, desc->pkt_length);
 			skb->protocol = eth_type_trans(skb, nds[desc->channel]);
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index 03199fa..a07a597 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -400,7 +400,7 @@
 			dma_cache_inv((unsigned long)pkt_buf, pkt_len - 4);
 
 			/* Malloc up new buffer. */
-			skb_new = netdev_alloc_skb(dev, KORINA_RBSIZE + 2);
+			skb_new = netdev_alloc_skb_ip_align(dev, KORINA_RBSIZE);
 
 			if (!skb_new)
 				break;
@@ -417,9 +417,6 @@
 			if (devcs & ETH_RX_MP)
 				dev->stats.multicast++;
 
-			/* 16 bit align */
-			skb_reserve(skb_new, 2);
-
 			lp->rx_skb[lp->rx_next_done] = skb_new;
 		}
 
diff --git a/drivers/net/ks8842.c b/drivers/net/ks8842.c
index 99e9541..5c45cb5 100644
--- a/drivers/net/ks8842.c
+++ b/drivers/net/ks8842.c
@@ -357,7 +357,7 @@
 
 	/* check the status */
 	if ((status & RXSR_VALID) && !(status & RXSR_ERROR)) {
-		struct sk_buff *skb = netdev_alloc_skb(netdev, len + 2);
+		struct sk_buff *skb = netdev_alloc_skb_ip_align(netdev, len);
 
 		dev_dbg(&adapter->pdev->dev, "%s, got package, len: %d\n",
 			__func__, len);
@@ -369,9 +369,6 @@
 			if (status & RXSR_MULTICAST)
 				netdev->stats.multicast++;
 
-			/* Align socket buffer in 4-byte boundary for
-				 better performance. */
-			skb_reserve(skb, 2);
 			data = (u32 *)skb_put(skb, len);
 
 			ks8842_select_bank(adapter, 17);
diff --git a/drivers/net/lib82596.c b/drivers/net/lib82596.c
index 51e11c3..5b24c67 100644
--- a/drivers/net/lib82596.c
+++ b/drivers/net/lib82596.c
@@ -470,11 +470,11 @@
 
 	for (i = 0, rbd = dma->rbds; i < rx_ring_size; i++, rbd++) {
 		dma_addr_t dma_addr;
-		struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+		struct sk_buff *skb;
 
+		skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
 		if (skb == NULL)
 			return -1;
-		skb_reserve(skb, 2);
 		dma_addr = dma_map_single(dev->dev.parent, skb->data,
 					  PKT_BUF_SZ, DMA_FROM_DEVICE);
 		rbd->v_next = rbd+1;
@@ -697,12 +697,12 @@
 						 (dma_addr_t)SWAP32(rbd->b_data),
 						 PKT_BUF_SZ, DMA_FROM_DEVICE);
 				/* Get fresh skbuff to replace filled one. */
-				newskb = netdev_alloc_skb(dev, PKT_BUF_SZ + 4);
+				newskb = netdev_alloc_skb_ip_align(dev,
+								   PKT_BUF_SZ);
 				if (newskb == NULL) {
 					skb = NULL;	/* drop pkt */
 					goto memory_squeeze;
 				}
-				skb_reserve(newskb, 2);
 
 				/* Pass up the skb already on the Rx ring. */
 				skb_put(skb, pkt_len);
@@ -716,7 +716,7 @@
 				rbd->b_data = SWAP32(dma_addr);
 				DMA_WBACK_INV(dev, rbd, sizeof(struct i596_rbd));
 			} else
-				skb = netdev_alloc_skb(dev, pkt_len + 2);
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
 memory_squeeze:
 			if (skb == NULL) {
 				/* XXX tulip.c can defer packets here!! */
@@ -730,7 +730,6 @@
 					dma_sync_single_for_cpu(dev->dev.parent,
 								(dma_addr_t)SWAP32(rbd->b_data),
 								PKT_BUF_SZ, DMA_FROM_DEVICE);
-					skb_reserve(skb, 2);
 					memcpy(skb_put(skb, pkt_len), rbd->v_data, pkt_len);
 					dma_sync_single_for_device(dev->dev.parent,
 								   (dma_addr_t)SWAP32(rbd->b_data),
diff --git a/drivers/net/macvlan.c b/drivers/net/macvlan.c
index 3aabfd9..20b7707 100644
--- a/drivers/net/macvlan.c
+++ b/drivers/net/macvlan.c
@@ -555,13 +555,13 @@
 	return 0;
 }
 
-static void macvlan_dellink(struct net_device *dev)
+static void macvlan_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct macvlan_dev *vlan = netdev_priv(dev);
 	struct macvlan_port *port = vlan->port;
 
 	list_del(&vlan->list);
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	if (list_empty(&port->vlans))
 		macvlan_port_destroy(port->dev);
@@ -601,7 +601,7 @@
 		break;
 	case NETDEV_UNREGISTER:
 		list_for_each_entry_safe(vlan, next, &port->vlans, list)
-			macvlan_dellink(vlan->dev);
+			macvlan_dellink(vlan->dev, NULL);
 		break;
 	}
 	return NOTIFY_DONE;
diff --git a/drivers/net/mdio.c b/drivers/net/mdio.c
index 21f8754..e85bf04 100644
--- a/drivers/net/mdio.c
+++ b/drivers/net/mdio.c
@@ -162,6 +162,10 @@
 		result |= ADVERTISED_100baseT_Half;
 	if (reg & ADVERTISE_100FULL)
 		result |= ADVERTISED_100baseT_Full;
+	if (reg & ADVERTISE_PAUSE_CAP)
+		result |= ADVERTISED_Pause;
+	if (reg & ADVERTISE_PAUSE_ASYM)
+		result |= ADVERTISED_Asym_Pause;
 	return result;
 }
 
@@ -344,11 +348,9 @@
 
 	old_adv = mdio->mdio_read(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 				  MDIO_AN_ADVERTISE);
-	adv = old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
-	if (ecmd->autoneg)
-		adv |= mii_advertise_flowctrl(
-			(ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
-			(ecmd->tx_pause ? FLOW_CTRL_TX : 0));
+	adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) |
+	       mii_advertise_flowctrl((ecmd->rx_pause ? FLOW_CTRL_RX : 0) |
+				      (ecmd->tx_pause ? FLOW_CTRL_TX : 0)));
 	if (adv != old_adv) {
 		mdio->mdio_write(mdio->dev, mdio->prtad, MDIO_MMD_AN,
 				 MDIO_AN_ADVERTISE, adv);
diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c
index cee199c..3c16602 100644
--- a/drivers/net/mlx4/fw.c
+++ b/drivers/net/mlx4/fw.c
@@ -33,6 +33,7 @@
  */
 
 #include <linux/mlx4/cmd.h>
+#include <linux/cache.h>
 
 #include "fw.h"
 #include "icm.h"
@@ -698,6 +699,7 @@
 #define INIT_HCA_IN_SIZE		 0x200
 #define INIT_HCA_VERSION_OFFSET		 0x000
 #define	 INIT_HCA_VERSION		 2
+#define INIT_HCA_CACHELINE_SZ_OFFSET	 0x0e
 #define INIT_HCA_FLAGS_OFFSET		 0x014
 #define INIT_HCA_QPC_OFFSET		 0x020
 #define	 INIT_HCA_QPC_BASE_OFFSET	 (INIT_HCA_QPC_OFFSET + 0x10)
@@ -735,6 +737,9 @@
 
 	*((u8 *) mailbox->buf + INIT_HCA_VERSION_OFFSET) = INIT_HCA_VERSION;
 
+	*((u8 *) mailbox->buf + INIT_HCA_CACHELINE_SZ_OFFSET) =
+		(ilog2(cache_line_size()) - 4) << 5;
+
 #if defined(__LITTLE_ENDIAN)
 	*(inbox + INIT_HCA_FLAGS_OFFSET / 4) &= ~cpu_to_be32(1 << 1);
 #elif defined(__BIG_ENDIAN)
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index f362451..5319db9 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -207,7 +207,6 @@
 	int big_bytes;
 	int max_intr_slots;
 	struct net_device *dev;
-	struct net_device_stats stats;
 	spinlock_t stats_lock;
 	u8 __iomem *sram;
 	int sram_size;
@@ -1832,7 +1831,7 @@
 	/* force stats update */
 	(void)myri10ge_get_stats(netdev);
 	for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
-		data[i] = ((unsigned long *)&mgp->stats)[i];
+		data[i] = ((unsigned long *)&netdev->stats)[i];
 
 	data[i++] = (unsigned int)mgp->tx_boundary;
 	data[i++] = (unsigned int)mgp->wc_enabled;
@@ -3002,7 +3001,7 @@
 {
 	struct myri10ge_priv *mgp = netdev_priv(dev);
 	struct myri10ge_slice_netstats *slice_stats;
-	struct net_device_stats *stats = &mgp->stats;
+	struct net_device_stats *stats = &dev->stats;
 	int i;
 
 	spin_lock(&mgp->stats_lock);
diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h
index 7384f59..645450d 100644
--- a/drivers/net/netxen/netxen_nic.h
+++ b/drivers/net/netxen/netxen_nic.h
@@ -53,8 +53,8 @@
 
 #define _NETXEN_NIC_LINUX_MAJOR 4
 #define _NETXEN_NIC_LINUX_MINOR 0
-#define _NETXEN_NIC_LINUX_SUBVERSION 50
-#define NETXEN_NIC_LINUX_VERSIONID  "4.0.50"
+#define _NETXEN_NIC_LINUX_SUBVERSION 65
+#define NETXEN_NIC_LINUX_VERSIONID  "4.0.65"
 
 #define NETXEN_VERSION_CODE(a, b, c)	(((a) << 24) + ((b) << 16) + (c))
 #define _major(v)	(((v) >> 24) & 0xff)
@@ -74,8 +74,6 @@
 #define NETXEN_FLASH_TOTAL_SIZE  (NETXEN_NUM_FLASH_SECTORS \
 					* NETXEN_FLASH_SECTOR_SIZE)
 
-#define PHAN_VENDOR_ID 0x4040
-
 #define RCV_DESC_RINGSIZE(rds_ring)	\
 	(sizeof(struct rcv_desc) * (rds_ring)->num_desc)
 #define RCV_BUFF_RINGSIZE(rds_ring)	\
@@ -117,9 +115,11 @@
 #define NX_P3_B0		0x40
 #define NX_P3_B1		0x41
 #define NX_P3_B2		0x42
+#define NX_P3P_A0		0x50
 
 #define NX_IS_REVISION_P2(REVISION)     (REVISION <= NX_P2_C1)
 #define NX_IS_REVISION_P3(REVISION)     (REVISION >= NX_P3_A0)
+#define NX_IS_REVISION_P3P(REVISION)     (REVISION >= NX_P3P_A0)
 
 #define FIRST_PAGE_GROUP_START	0
 #define FIRST_PAGE_GROUP_END	0x100000
@@ -419,6 +419,34 @@
 	__le64 status_desc_data[2];
 } __attribute__ ((aligned(16)));
 
+/* UNIFIED ROMIMAGE *************************/
+#define NX_UNI_FW_MIN_SIZE		0x3eb000
+#define NX_UNI_DIR_SECT_PRODUCT_TBL	0x0
+#define NX_UNI_DIR_SECT_BOOTLD		0x6
+#define NX_UNI_DIR_SECT_FW		0x7
+
+/*Offsets */
+#define NX_UNI_CHIP_REV_OFF		10
+#define NX_UNI_FLAGS_OFF		11
+#define NX_UNI_BIOS_VERSION_OFF 	12
+#define NX_UNI_BOOTLD_IDX_OFF		27
+#define NX_UNI_FIRMWARE_IDX_OFF 	29
+
+struct uni_table_desc{
+	uint32_t	findex;
+	uint32_t	num_entries;
+	uint32_t	entry_size;
+	uint32_t	reserved[5];
+};
+
+struct uni_data_desc{
+	uint32_t	findex;
+	uint32_t	size;
+	uint32_t	reserved[5];
+};
+
+/* UNIFIED ROMIMAGE *************************/
+
 /* The version of the main data structure */
 #define	NETXEN_BDINFO_VERSION 1
 
@@ -485,7 +513,15 @@
 #define NX_P2_MN_ROMIMAGE	0
 #define NX_P3_CT_ROMIMAGE	1
 #define NX_P3_MN_ROMIMAGE	2
-#define NX_FLASH_ROMIMAGE	3
+#define NX_UNIFIED_ROMIMAGE	3
+#define NX_FLASH_ROMIMAGE	4
+#define NX_UNKNOWN_ROMIMAGE	0xff
+
+#define NX_P2_MN_ROMIMAGE_NAME		"nxromimg.bin"
+#define NX_P3_CT_ROMIMAGE_NAME		"nx3fwct.bin"
+#define NX_P3_MN_ROMIMAGE_NAME		"nx3fwmn.bin"
+#define NX_UNIFIED_ROMIMAGE_NAME	"phanfw.bin"
+#define NX_FLASH_ROMIMAGE_NAME		"flash"
 
 extern char netxen_nic_driver_name[];
 
@@ -543,13 +579,16 @@
 	void __iomem *pci_base1;
 	void __iomem *pci_base2;
 	void __iomem *db_base;
+	void __iomem *ocm_win_crb;
+
 	unsigned long db_len;
 	unsigned long pci_len0;
 
-	int qdr_sn_window;
-	int ddr_mn_window;
-	u32 mn_win_crb;
-	u32 ms_win_crb;
+	u32 ocm_win;
+	u32 crb_win;
+
+	rwlock_t crb_lock;
+	spinlock_t mem_lock;
 
 	u8 cut_through;
 	u8 revision_id;
@@ -1039,6 +1078,9 @@
 #define LINKEVENT_LINKSPEED_MBPS	0
 #define LINKEVENT_LINKSPEED_ENCODED	1
 
+#define AUTO_FW_RESET_ENABLED	0xEF10AF12
+#define AUTO_FW_RESET_DISABLED	0xDCBAAF12
+
 /* firmware response header:
  *	63:58 - message type
  *	57:56 - owner
@@ -1086,6 +1128,7 @@
 #define NETXEN_NIC_MSIX_ENABLED		0x04
 #define NETXEN_NIC_LRO_ENABLED		0x08
 #define NETXEN_NIC_BRIDGE_ENABLED       0X10
+#define NETXEN_NIC_DIAG_ENABLED		0x20
 #define NETXEN_IS_MSI_FAMILY(adapter) \
 	((adapter)->flags & (NETXEN_NIC_MSI_ENABLED | NETXEN_NIC_MSIX_ENABLED))
 
@@ -1115,10 +1158,6 @@
 	struct pci_dev *pdev;
 	struct list_head mac_list;
 
-	u32 curr_window;
-	u32 crb_win;
-	rwlock_t adapter_lock;
-
 	spinlock_t tx_clean_lock;
 
 	u16 num_txd;
@@ -1180,11 +1219,10 @@
 	u32 (*crb_read)(struct netxen_adapter *, ulong);
 	int (*crb_write)(struct netxen_adapter *, ulong, u32);
 
-	int (*pci_mem_read)(struct netxen_adapter *, u64, void *, int);
-	int (*pci_mem_write)(struct netxen_adapter *, u64, void *, int);
+	int (*pci_mem_read)(struct netxen_adapter *, u64, u64 *);
+	int (*pci_mem_write)(struct netxen_adapter *, u64, u64);
 
-	unsigned long (*pci_set_window)(struct netxen_adapter *,
-			unsigned long long);
+	int (*pci_set_window)(struct netxen_adapter *, u64, u32 *);
 
 	u32 (*io_read)(struct netxen_adapter *, void __iomem *);
 	void (*io_write)(struct netxen_adapter *, void __iomem *, u32);
@@ -1203,12 +1241,10 @@
 
 	struct work_struct  tx_timeout_task;
 
-	struct net_device_stats net_stats;
-
 	nx_nic_intr_coalesce_t coal;
 
 	unsigned long state;
-	u32 resv5;
+	__le32 file_prd_off;	/*File fw product offset*/
 	u32 fw_version;
 	const struct firmware *fw;
 };
@@ -1271,7 +1307,7 @@
 int netxen_need_fw_reset(struct netxen_adapter *adapter);
 void netxen_request_firmware(struct netxen_adapter *adapter);
 void netxen_release_firmware(struct netxen_adapter *adapter);
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
+int netxen_pinit_from_rom(struct netxen_adapter *adapter);
 
 int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
 int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c
index 714f387..c86095e 100644
--- a/drivers/net/netxen/netxen_nic_ethtool.c
+++ b/drivers/net/netxen/netxen_nic_ethtool.c
@@ -85,11 +85,9 @@
 
 	strncpy(drvinfo->driver, netxen_nic_driver_name, 32);
 	strncpy(drvinfo->version, NETXEN_NIC_LINUX_VERSIONID, 32);
-	read_lock(&adapter->adapter_lock);
 	fw_major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
 	fw_minor = NXRD32(adapter, NETXEN_FW_VERSION_MINOR);
 	fw_build = NXRD32(adapter, NETXEN_FW_VERSION_SUB);
-	read_unlock(&adapter->adapter_lock);
 	sprintf(drvinfo->fw_version, "%d.%d.%d", fw_major, fw_minor, fw_build);
 
 	strncpy(drvinfo->bus_info, pci_name(adapter->pdev), 32);
@@ -690,8 +688,8 @@
 	u32 data_read, data_written;
 
 	data_read = NXRD32(adapter, NETXEN_PCIX_PH_REG(0));
-	if ((data_read & 0xffff) != PHAN_VENDOR_ID)
-	return 1;
+	if ((data_read & 0xffff) != adapter->pdev->vendor)
+		return 1;
 
 	data_written = (u32)0xa5a5a5a5;
 
diff --git a/drivers/net/netxen/netxen_nic_hdr.h b/drivers/net/netxen/netxen_nic_hdr.h
index 1c46da6..a39155d 100644
--- a/drivers/net/netxen/netxen_nic_hdr.h
+++ b/drivers/net/netxen/netxen_nic_hdr.h
@@ -662,40 +662,51 @@
 #define NETXEN_NIU_AP_STATION_ADDR_0(I)    (NETXEN_CRB_NIU+0xa0040+(I)*0x10000)
 #define NETXEN_NIU_AP_STATION_ADDR_1(I)    (NETXEN_CRB_NIU+0xa0044+(I)*0x10000)
 
+
+#define TEST_AGT_CTRL	(0x00)
+
+#define TA_CTL_START	1
+#define TA_CTL_ENABLE	2
+#define TA_CTL_WRITE	4
+#define TA_CTL_BUSY	8
+
 /*
  *   Register offsets for MN
  */
-#define	MIU_CONTROL	       (0x000)
-#define MIU_TEST_AGT_CTRL      (0x090)
-#define MIU_TEST_AGT_ADDR_LO   (0x094)
-#define MIU_TEST_AGT_ADDR_HI   (0x098)
-#define MIU_TEST_AGT_WRDATA_LO (0x0a0)
-#define MIU_TEST_AGT_WRDATA_HI (0x0a4)
-#define MIU_TEST_AGT_WRDATA(i) (0x0a0+(4*(i)))
-#define MIU_TEST_AGT_RDDATA_LO (0x0a8)
-#define MIU_TEST_AGT_RDDATA_HI (0x0ac)
-#define MIU_TEST_AGT_RDDATA(i) (0x0a8+(4*(i)))
-#define MIU_TEST_AGT_ADDR_MASK 0xfffffff8
-#define MIU_TEST_AGT_UPPER_ADDR(off) (0)
+#define MIU_TEST_AGT_BASE		(0x90)
 
-/* MIU_TEST_AGT_CTRL flags. work for SIU as well */
-#define MIU_TA_CTL_START        1
-#define MIU_TA_CTL_ENABLE       2
-#define MIU_TA_CTL_WRITE        4
-#define MIU_TA_CTL_BUSY         8
+#define MIU_TEST_AGT_ADDR_LO		(0x04)
+#define MIU_TEST_AGT_ADDR_HI		(0x08)
+#define MIU_TEST_AGT_WRDATA_LO		(0x10)
+#define MIU_TEST_AGT_WRDATA_HI		(0x14)
+#define MIU_TEST_AGT_WRDATA_UPPER_LO	(0x20)
+#define MIU_TEST_AGT_WRDATA_UPPER_HI	(0x24)
+#define MIU_TEST_AGT_WRDATA(i)		(0x10+(0x10*((i)>>1))+(4*((i)&1)))
+#define MIU_TEST_AGT_RDDATA_LO		(0x18)
+#define MIU_TEST_AGT_RDDATA_HI		(0x1c)
+#define MIU_TEST_AGT_RDDATA_UPPER_LO	(0x28)
+#define MIU_TEST_AGT_RDDATA_UPPER_HI	(0x2c)
+#define MIU_TEST_AGT_RDDATA(i)		(0x18+(0x10*((i)>>1))+(4*((i)&1)))
 
-#define SIU_TEST_AGT_CTRL      (0x060)
-#define SIU_TEST_AGT_ADDR_LO   (0x064)
-#define SIU_TEST_AGT_ADDR_HI   (0x078)
-#define SIU_TEST_AGT_WRDATA_LO (0x068)
-#define SIU_TEST_AGT_WRDATA_HI (0x06c)
-#define SIU_TEST_AGT_WRDATA(i) (0x068+(4*(i)))
-#define SIU_TEST_AGT_RDDATA_LO (0x070)
-#define SIU_TEST_AGT_RDDATA_HI (0x074)
-#define SIU_TEST_AGT_RDDATA(i) (0x070+(4*(i)))
+#define MIU_TEST_AGT_ADDR_MASK		0xfffffff8
+#define MIU_TEST_AGT_UPPER_ADDR(off)	(0)
 
-#define SIU_TEST_AGT_ADDR_MASK 0x3ffff8
-#define SIU_TEST_AGT_UPPER_ADDR(off) ((off)>>22)
+/*
+ *   Register offsets for MS
+ */
+#define SIU_TEST_AGT_BASE		(0x60)
+
+#define SIU_TEST_AGT_ADDR_LO		(0x04)
+#define SIU_TEST_AGT_ADDR_HI		(0x18)
+#define SIU_TEST_AGT_WRDATA_LO		(0x08)
+#define SIU_TEST_AGT_WRDATA_HI		(0x0c)
+#define SIU_TEST_AGT_WRDATA(i)		(0x08+(4*(i)))
+#define SIU_TEST_AGT_RDDATA_LO		(0x10)
+#define SIU_TEST_AGT_RDDATA_HI		(0x14)
+#define SIU_TEST_AGT_RDDATA(i)		(0x10+(4*(i)))
+
+#define SIU_TEST_AGT_ADDR_MASK		0x3ffff8
+#define SIU_TEST_AGT_UPPER_ADDR(off)	((off)>>22)
 
 /* XG Link status */
 #define XG_LINK_UP	0x10
@@ -857,6 +868,9 @@
 		(PCIX_SN_WINDOW_F0 + (0x20 * (func))) :\
 		(PCIX_SN_WINDOW_F4 + (0x10 * ((func)-4))))
 
+#define PCIX_OCM_WINDOW		(0x10800)
+#define PCIX_OCM_WINDOW_REG(func)	(PCIX_OCM_WINDOW + 0x20 * (func))
+
 #define PCIX_TARGET_STATUS	(0x10118)
 #define PCIX_TARGET_STATUS_F1	(0x10160)
 #define PCIX_TARGET_STATUS_F2	(0x10164)
diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 3185a98..b3054c6 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -31,6 +31,7 @@
 #define MASK(n) ((1ULL<<(n))-1)
 #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | ((addr >> 25) & 0x3ff))
 #define OCM_WIN(addr) (((addr & 0x1ff0000) >> 1) | ((addr >> 25) & 0x3ff))
+#define OCM_WIN_P3P(addr) (addr & 0xffc0000)
 #define MS_WIN(addr) (addr & 0x0ffc0000)
 
 #define GET_MEM_OFFS_2M(addr) (addr & MASK(18))
@@ -41,6 +42,11 @@
 #define CRB_HI(off)	((crb_hub_agt[CRB_BLK(off)] << 20) | ((off) & 0xf0000))
 #define CRB_INDIRECT_2M	(0x1e0000UL)
 
+static void netxen_nic_io_write_128M(struct netxen_adapter *adapter,
+		void __iomem *addr, u32 data);
+static u32 netxen_nic_io_read_128M(struct netxen_adapter *adapter,
+		void __iomem *addr);
+
 #ifndef readq
 static inline u64 readq(void __iomem *addr)
 {
@@ -326,7 +332,7 @@
 		if (done == 1)
 			break;
 		if (++timeout >= NETXEN_PCIE_SEM_TIMEOUT)
-			return -1;
+			return -EIO;
 		msleep(1);
 	}
 
@@ -1046,89 +1052,71 @@
  * Changes the CRB window to the specified window.
  */
 static void
-netxen_nic_pci_change_crbwindow_128M(struct netxen_adapter *adapter, u32 wndw)
+netxen_nic_pci_set_crbwindow_128M(struct netxen_adapter *adapter,
+		u32 window)
 {
 	void __iomem *offset;
-	u32 tmp;
-	int count = 0;
-	uint8_t func = adapter->ahw.pci_func;
+	int count = 10;
+	u8 func = adapter->ahw.pci_func;
 
-	if (adapter->curr_window == wndw)
+	if (adapter->ahw.crb_win == window)
 		return;
-	/*
-	 * Move the CRB window.
-	 * We need to write to the "direct access" region of PCI
-	 * to avoid a race condition where the window register has
-	 * not been successfully written across CRB before the target
-	 * register address is received by PCI. The direct region bypasses
-	 * the CRB bus.
-	 */
+
 	offset = PCI_OFFSET_SECOND_RANGE(adapter,
 			NETXEN_PCIX_PH_REG(PCIE_CRB_WINDOW_REG(func)));
 
-	if (wndw & 0x1)
-		wndw = NETXEN_WINDOW_ONE;
-
-	writel(wndw, offset);
-
-	/* MUST make sure window is set before we forge on... */
-	while ((tmp = readl(offset)) != wndw) {
-		printk(KERN_WARNING "%s: %s WARNING: CRB window value not "
-		       "registered properly: 0x%08x.\n",
-		       netxen_nic_driver_name, __func__, tmp);
-		mdelay(1);
-		if (count >= 10)
+	writel(window, offset);
+	do {
+		if (window == readl(offset))
 			break;
-		count++;
-	}
 
-	if (wndw == NETXEN_WINDOW_ONE)
-		adapter->curr_window = 1;
-	else
-		adapter->curr_window = 0;
+		if (printk_ratelimit())
+			dev_warn(&adapter->pdev->dev,
+					"failed to set CRB window to %d\n",
+					(window == NETXEN_WINDOW_ONE));
+		udelay(1);
+
+	} while (--count > 0);
+
+	if (count > 0)
+		adapter->ahw.crb_win = window;
 }
 
 /*
- * Return -1 if off is not valid,
+ * Returns < 0 if off is not valid,
  *	 1 if window access is needed. 'off' is set to offset from
  *	   CRB space in 128M pci map
  *	 0 if no window access is needed. 'off' is set to 2M addr
  * In: 'off' is offset from base in 128M pci map
  */
 static int
-netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter, ulong *off)
+netxen_nic_pci_get_crb_addr_2M(struct netxen_adapter *adapter,
+		ulong off, void __iomem **addr)
 {
 	crb_128M_2M_sub_block_map_t *m;
 
 
-	if (*off >= NETXEN_CRB_MAX)
-		return -1;
+	if ((off >= NETXEN_CRB_MAX) || (off < NETXEN_PCI_CRBSPACE))
+		return -EINVAL;
 
-	if (*off >= NETXEN_PCI_CAMQM && (*off < NETXEN_PCI_CAMQM_2M_END)) {
-		*off = (*off - NETXEN_PCI_CAMQM) + NETXEN_PCI_CAMQM_2M_BASE +
-			(ulong)adapter->ahw.pci_base0;
-		return 0;
-	}
-
-	if (*off < NETXEN_PCI_CRBSPACE)
-		return -1;
-
-	*off -= NETXEN_PCI_CRBSPACE;
+	off -= NETXEN_PCI_CRBSPACE;
 
 	/*
 	 * Try direct map
 	 */
-	m = &crb_128M_2M_map[CRB_BLK(*off)].sub_block[CRB_SUBBLK(*off)];
+	m = &crb_128M_2M_map[CRB_BLK(off)].sub_block[CRB_SUBBLK(off)];
 
-	if (m->valid && (m->start_128M <= *off) && (m->end_128M > *off)) {
-		*off = *off + m->start_2M - m->start_128M +
-			(ulong)adapter->ahw.pci_base0;
+	if (m->valid && (m->start_128M <= off) && (m->end_128M > off)) {
+		*addr = adapter->ahw.pci_base0 + m->start_2M +
+			(off - m->start_128M);
 		return 0;
 	}
 
 	/*
 	 * Not in direct map, use crb window
 	 */
+	*addr = adapter->ahw.pci_base0 + CRB_INDIRECT_2M +
+		(off & MASK(16));
 	return 1;
 }
 
@@ -1138,24 +1126,26 @@
  * side effect: lock crb window
  */
 static void
-netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong *off)
+netxen_nic_pci_set_crbwindow_2M(struct netxen_adapter *adapter, ulong off)
 {
-	u32 win_read;
+	u32 window;
+	void __iomem *addr = adapter->ahw.pci_base0 + CRB_WINDOW_2M;
 
-	adapter->crb_win = CRB_HI(*off);
-	writel(adapter->crb_win, (adapter->ahw.pci_base0 + CRB_WINDOW_2M));
-	/*
-	 * Read back value to make sure write has gone through before trying
-	 * to use it.
-	 */
-	win_read = readl(adapter->ahw.pci_base0 + CRB_WINDOW_2M);
-	if (win_read != adapter->crb_win) {
-		printk(KERN_ERR "%s: Written crbwin (0x%x) != "
-				"Read crbwin (0x%x), off=0x%lx\n",
-				__func__, adapter->crb_win, win_read, *off);
+	off -= NETXEN_PCI_CRBSPACE;
+
+	window = CRB_HI(off);
+
+	if (adapter->ahw.crb_win == window)
+		return;
+
+	writel(window, addr);
+	if (readl(addr) != window) {
+		if (printk_ratelimit())
+			dev_warn(&adapter->pdev->dev,
+				"failed to set CRB window to %d off 0x%lx\n",
+				window, off);
 	}
-	*off = (*off & MASK(16)) + CRB_INDIRECT_2M +
-		(ulong)adapter->ahw.pci_base0;
+	adapter->ahw.crb_win = window;
 }
 
 static int
@@ -1172,16 +1162,15 @@
 	BUG_ON(!addr);
 
 	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
-		read_lock(&adapter->adapter_lock);
-		writel(data, addr);
-		read_unlock(&adapter->adapter_lock);
+		netxen_nic_io_write_128M(adapter, addr, data);
 	} else {		/* Window 0 */
-		write_lock_irqsave(&adapter->adapter_lock, flags);
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		addr = pci_base_offset(adapter, off);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+		netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 		writel(data, addr);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter,
+				NETXEN_WINDOW_ONE);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
 	}
 
 	return 0;
@@ -1202,15 +1191,14 @@
 	BUG_ON(!addr);
 
 	if (ADDR_IN_WINDOW1(off)) {	/* Window 1 */
-		read_lock(&adapter->adapter_lock);
-		data = readl(addr);
-		read_unlock(&adapter->adapter_lock);
+		data = netxen_nic_io_read_128M(adapter, addr);
 	} else {		/* Window 0 */
-		write_lock_irqsave(&adapter->adapter_lock, flags);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 		data = readl(addr);
-		netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
+		netxen_nic_pci_set_crbwindow_128M(adapter,
+				NETXEN_WINDOW_ONE);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
 	}
 
 	return data;
@@ -1221,28 +1209,30 @@
 {
 	unsigned long flags;
 	int rv;
+	void __iomem *addr = NULL;
 
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, off, &addr);
 
-	if (rv == -1) {
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
-				__func__, off);
-		dump_stack();
-		return -1;
+	if (rv == 0) {
+		writel(data, addr);
+		return 0;
 	}
 
-	if (rv == 1) {
-		write_lock_irqsave(&adapter->adapter_lock, flags);
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
-		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		writel(data, (void __iomem *)off);
+		netxen_nic_pci_set_crbwindow_2M(adapter, off);
+		writel(data, addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	} else
-		writel(data, (void __iomem *)off);
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return 0;
+	}
 
-
-	return 0;
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -EIO;
 }
 
 static u32
@@ -1251,102 +1241,37 @@
 	unsigned long flags;
 	int rv;
 	u32 data;
+	void __iomem *addr = NULL;
 
-	rv = netxen_nic_pci_get_crb_addr_2M(adapter, &off);
+	rv = netxen_nic_pci_get_crb_addr_2M(adapter, off, &addr);
 
-	if (rv == -1) {
-		printk(KERN_ERR "%s: invalid offset: 0x%016lx\n",
-				__func__, off);
-		dump_stack();
-		return -1;
-	}
+	if (rv == 0)
+		return readl(addr);
 
-	if (rv == 1) {
-		write_lock_irqsave(&adapter->adapter_lock, flags);
+	if (rv > 0) {
+		/* indirect access */
+		write_lock_irqsave(&adapter->ahw.crb_lock, flags);
 		crb_win_lock(adapter);
-		netxen_nic_pci_set_crbwindow_2M(adapter, &off);
-		data = readl((void __iomem *)off);
+		netxen_nic_pci_set_crbwindow_2M(adapter, off);
+		data = readl(addr);
 		crb_win_unlock(adapter);
-		write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	} else
-		data = readl((void __iomem *)off);
-
-	return data;
-}
-
-static int netxen_pci_set_window_warning_count;
-
-static unsigned long
-netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
-		unsigned long long addr)
-{
-	void __iomem *offset;
-	int window;
-	unsigned long long	qdr_max;
-	uint8_t func = adapter->ahw.pci_func;
-
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P2;
-	} else {
-		qdr_max = NETXEN_ADDR_QDR_NET_MAX_P3;
+		write_unlock_irqrestore(&adapter->ahw.crb_lock, flags);
+		return data;
 	}
 
-	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		/* DDR network side */
-		addr -= NETXEN_ADDR_DDR_NET;
-		window = (addr >> 25) & 0x3ff;
-		if (adapter->ahw.ddr_mn_window != window) {
-			adapter->ahw.ddr_mn_window = window;
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-				NETXEN_PCIX_PH_REG(PCIE_MN_WINDOW_REG(func)));
-			writel(window, offset);
-			/* MUST make sure window is set before we forge on... */
-			readl(offset);
-		}
-		addr -= (window * NETXEN_WINDOW_ONE);
-		addr += NETXEN_PCI_DDR_NET;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
-		addr -= NETXEN_ADDR_OCM0;
-		addr += NETXEN_PCI_OCM0;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
-		addr -= NETXEN_ADDR_OCM1;
-		addr += NETXEN_PCI_OCM1;
-	} else if (ADDR_IN_RANGE(addr, NETXEN_ADDR_QDR_NET, qdr_max)) {
-		/* QDR network side */
-		addr -= NETXEN_ADDR_QDR_NET;
-		window = (addr >> 22) & 0x3f;
-		if (adapter->ahw.qdr_sn_window != window) {
-			adapter->ahw.qdr_sn_window = window;
-			offset = PCI_OFFSET_SECOND_RANGE(adapter,
-				NETXEN_PCIX_PH_REG(PCIE_SN_WINDOW_REG(func)));
-			writel((window << 22), offset);
-			/* MUST make sure window is set before we forge on... */
-			readl(offset);
-		}
-		addr -= (window * 0x400000);
-		addr += NETXEN_PCI_QDR_NET;
-	} else {
-		/*
-		 * peg gdb frequently accesses memory that doesn't exist,
-		 * this limits the chit chat so debugging isn't slowed down.
-		 */
-		if ((netxen_pci_set_window_warning_count++ < 8)
-		    || (netxen_pci_set_window_warning_count % 64 == 0))
-			printk("%s: Warning:netxen_nic_pci_set_window()"
-			       " Unknown address range!\n",
-			       netxen_nic_driver_name);
-		addr = -1UL;
-	}
-	return addr;
+	dev_err(&adapter->pdev->dev,
+			"%s: invalid offset: 0x%016lx\n", __func__, off);
+	dump_stack();
+	return -1;
 }
 
 /* window 1 registers only */
 static void netxen_nic_io_write_128M(struct netxen_adapter *adapter,
 		void __iomem *addr, u32 data)
 {
-	read_lock(&adapter->adapter_lock);
+	read_lock(&adapter->ahw.crb_lock);
 	writel(data, addr);
-	read_unlock(&adapter->adapter_lock);
+	read_unlock(&adapter->ahw.crb_lock);
 }
 
 static u32 netxen_nic_io_read_128M(struct netxen_adapter *adapter,
@@ -1354,9 +1279,9 @@
 {
 	u32 val;
 
-	read_lock(&adapter->adapter_lock);
+	read_lock(&adapter->ahw.crb_lock);
 	val = readl(addr);
-	read_unlock(&adapter->adapter_lock);
+	read_unlock(&adapter->ahw.crb_lock);
 
 	return val;
 }
@@ -1376,488 +1301,437 @@
 void __iomem *
 netxen_get_ioaddr(struct netxen_adapter *adapter, u32 offset)
 {
-	ulong off = offset;
+	void __iomem *addr = NULL;
 
 	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		if (offset < NETXEN_CRB_PCIX_HOST2 &&
-				offset > NETXEN_CRB_PCIX_HOST)
-			return PCI_OFFSET_SECOND_RANGE(adapter, offset);
-		return NETXEN_CRB_NORMALIZE(adapter, offset);
-	}
-
-	BUG_ON(netxen_nic_pci_get_crb_addr_2M(adapter, &off));
-	return (void __iomem *)off;
-}
-
-static unsigned long
-netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
-		unsigned long long addr)
-{
-	int window;
-	u32 win_read;
-
-	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		/* DDR network side */
-		window = MN_WIN(addr);
-		adapter->ahw.ddr_mn_window = window;
-		NXWR32(adapter, adapter->ahw.mn_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
-		if ((win_read << 17) != window) {
-			printk(KERN_INFO "Written MNwin (0x%x) != "
-				"Read MNwin (0x%x)\n", window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_DDR_NET;
-	} else if (ADDR_IN_RANGE(addr,
-				NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
-		if ((addr & 0x00ff800) == 0xff800) {
-			printk("%s: QM access not handled.\n", __func__);
-			addr = -1UL;
-		}
-
-		window = OCM_WIN(addr);
-		adapter->ahw.ddr_mn_window = window;
-		NXWR32(adapter, adapter->ahw.mn_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.mn_win_crb);
-		if ((win_read >> 7) != window) {
-			printk(KERN_INFO "%s: Written OCMwin (0x%x) != "
-					"Read OCMwin (0x%x)\n",
-					__func__, window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_OCM0_2M;
-
-	} else if (ADDR_IN_RANGE(addr,
-			NETXEN_ADDR_QDR_NET, NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		/* QDR network side */
-		window = MS_WIN(addr);
-		adapter->ahw.qdr_sn_window = window;
-		NXWR32(adapter, adapter->ahw.ms_win_crb, window);
-		win_read = NXRD32(adapter, adapter->ahw.ms_win_crb);
-		if (win_read != window) {
-			printk(KERN_INFO "%s: Written MSwin (0x%x) != "
-					"Read MSwin (0x%x)\n",
-					__func__, window, win_read);
-		}
-		addr = GET_MEM_OFFS_2M(addr) + NETXEN_PCI_QDR_NET;
-
+		if ((offset < NETXEN_CRB_PCIX_HOST2) &&
+				(offset > NETXEN_CRB_PCIX_HOST))
+			addr = PCI_OFFSET_SECOND_RANGE(adapter, offset);
+		else
+			addr = NETXEN_CRB_NORMALIZE(adapter, offset);
 	} else {
-		/*
-		 * peg gdb frequently accesses memory that doesn't exist,
-		 * this limits the chit chat so debugging isn't slowed down.
-		 */
-		if ((netxen_pci_set_window_warning_count++ < 8)
-			|| (netxen_pci_set_window_warning_count%64 == 0)) {
-			printk("%s: Warning:%s Unknown address range!\n",
-					__func__, netxen_nic_driver_name);
-}
-		addr = -1UL;
+		WARN_ON(netxen_nic_pci_get_crb_addr_2M(adapter,
+					offset, &addr));
 	}
+
 	return addr;
 }
 
+static int
+netxen_nic_pci_set_window_128M(struct netxen_adapter *adapter,
+		u64 addr, u32 *start)
+{
+	if (ADDR_IN_RANGE(addr, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		*start = (addr - NETXEN_ADDR_OCM0  + NETXEN_PCI_OCM0);
+		return 0;
+	} else if (ADDR_IN_RANGE(addr,
+				NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		*start = (addr - NETXEN_ADDR_OCM1 + NETXEN_PCI_OCM1);
+		return 0;
+	}
+
+	return -EIO;
+}
+
+static int
+netxen_nic_pci_set_window_2M(struct netxen_adapter *adapter,
+		u64 addr, u32 *start)
+{
+	u32 window;
+	struct pci_dev *pdev = adapter->pdev;
+
+	if ((addr & 0x00ff800) == 0xff800) {
+		if (printk_ratelimit())
+			dev_warn(&pdev->dev, "QM access not handled\n");
+		return -EIO;
+	}
+
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id))
+		window = OCM_WIN_P3P(addr);
+	else
+		window = OCM_WIN(addr);
+
+	writel(window, adapter->ahw.ocm_win_crb);
+	/* read back to flush */
+	readl(adapter->ahw.ocm_win_crb);
+
+	adapter->ahw.ocm_win = window;
+	*start = NETXEN_PCI_OCM0_2M + GET_MEM_OFFS_2M(addr);
+	return 0;
+}
+
+static int
+netxen_nic_pci_mem_access_direct(struct netxen_adapter *adapter, u64 off,
+		u64 *data, int op)
+{
+	void __iomem *addr, *mem_ptr = NULL;
+	resource_size_t mem_base;
+	int ret = -EIO;
+	u32 start;
+
+	spin_lock(&adapter->ahw.mem_lock);
+
+	ret = adapter->pci_set_window(adapter, off, &start);
+	if (ret != 0)
+		goto unlock;
+
+	addr = pci_base_offset(adapter, start);
+	if (addr)
+		goto noremap;
+
+	mem_base = pci_resource_start(adapter->pdev, 0) + (start & PAGE_MASK);
+
+	mem_ptr = ioremap(mem_base, PAGE_SIZE);
+	if (mem_ptr == NULL) {
+		ret = -EIO;
+		goto unlock;
+	}
+
+	addr = mem_ptr + (start & (PAGE_SIZE - 1));
+
+noremap:
+	if (op == 0)	/* read */
+		*data = readq(addr);
+	else		/* write */
+		writeq(*data, addr);
+
+unlock:
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	if (mem_ptr)
+		iounmap(mem_ptr);
+	return ret;
+}
+
 #define MAX_CTL_CHECK   1000
 
 static int
 netxen_nic_pci_mem_write_128M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 data)
 {
-	unsigned long   flags;
-	int	     i, j, ret = 0, loop, sz[2], off0;
-	uint32_t      temp;
-	uint64_t      off8, tmpw, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off_lo, off_hi, addr_hi, data_hi, data_lo;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P2 has different SIU and MIU test agent base addr */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P2)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_QDR_NET+SIU_TEST_AGT_BASE);
+		addr_hi = SIU_TEST_AGT_ADDR_HI;
+		data_lo = SIU_TEST_AGT_WRDATA_LO;
+		data_hi = SIU_TEST_AGT_WRDATA_HI;
+		off_lo = off & SIU_TEST_AGT_ADDR_MASK;
+		off_hi = SIU_TEST_AGT_UPPER_ADDR(off);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		addr_hi = MIU_TEST_AGT_ADDR_HI;
+		data_lo = MIU_TEST_AGT_WRDATA_LO;
+		data_hi = MIU_TEST_AGT_WRDATA_HI;
+		off_lo = off & MIU_TEST_AGT_ADDR_MASK;
+		off_hi = 0;
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX) ||
+		ADDR_IN_RANGE(off, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		if (adapter->ahw.pci_len0 != 0) {
+			return netxen_nic_pci_mem_access_direct(adapter,
+					off, &data, 1);
+		}
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0 = off & 0x7;
-	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
-	sz[1] = size - sz[0];
-	loop = ((off0 + size - 1) >> 3) + 1;
+	spin_lock(&adapter->ahw.mem_lock);
+	netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 
-	if ((size != 8) || (off0 != 0))  {
-		for (i = 0; i < loop; i++) {
-			if (adapter->pci_mem_read(adapter,
-				off8 + (i << 3), &word[i], 8))
-				return -1;
-		}
-	}
+	writel(off_lo, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(off_hi, (mem_crb + addr_hi));
+	writel(data & 0xffffffff, (mem_crb + data_lo));
+	writel((data >> 32) & 0xffffffff, (mem_crb + data_hi));
+	writel((TA_CTL_ENABLE | TA_CTL_WRITE), (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE | TA_CTL_WRITE),
+			(mem_crb + TEST_AGT_CTRL));
 
-	switch (size) {
-	case 1:
-		tmpw = *((uint8_t *)data);
-		break;
-	case 2:
-		tmpw = *((uint16_t *)data);
-		break;
-	case 4:
-		tmpw = *((uint32_t *)data);
-		break;
-	case 8:
-	default:
-		tmpw = *((uint64_t *)data);
-		break;
-	}
-	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
-	word[0] |= tmpw << (off0 * 8);
-
-	if (loop == 2) {
-		word[1] &= ~(~0ULL << (sz[1] * 8));
-		word[1] |= tmpw >> (sz[0] * 8);
-	}
-
-	write_lock_irqsave(&adapter->adapter_lock, flags);
-	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-
-	for (i = 0; i < loop; i++) {
-		writel((uint32_t)(off8 + (i << 3)),
-			(mem_crb+MIU_TEST_AGT_ADDR_LO));
-		writel(0,
-			(mem_crb+MIU_TEST_AGT_ADDR_HI));
-		writel(word[i] & 0xffffffff,
-			(mem_crb+MIU_TEST_AGT_WRDATA_LO));
-		writel((word[i] >> 32) & 0xffffffff,
-			(mem_crb+MIU_TEST_AGT_WRDATA_HI));
-		writel(MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE|MIU_TA_CTL_WRITE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(
-			     (mem_crb+MIU_TEST_AGT_CTRL));
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
-
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to write through agent\n");
-			ret = -1;
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl((mem_crb + TEST_AGT_CTRL));
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
 	}
 
-	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	write_unlock_irqrestore(&adapter->adapter_lock, flags);
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to write through agent\n");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+	netxen_nic_pci_set_crbwindow_128M(adapter, NETXEN_WINDOW_ONE);
+	spin_unlock(&adapter->ahw.mem_lock);
 	return ret;
 }
 
 static int
 netxen_nic_pci_mem_read_128M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 *data)
 {
-	unsigned long   flags;
-	int	     i, j = 0, k, start, end, loop, sz[2], off0[2];
-	uint32_t      temp;
-	uint64_t      off8, val, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off_lo, off_hi, addr_hi, data_hi, data_lo;
+	u64 val;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P2 has different SIU and MIU test agent base addr */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P2)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_QDR_NET+SIU_TEST_AGT_BASE);
+		addr_hi = SIU_TEST_AGT_ADDR_HI;
+		data_lo = SIU_TEST_AGT_RDDATA_LO;
+		data_hi = SIU_TEST_AGT_RDDATA_HI;
+		off_lo = off & SIU_TEST_AGT_ADDR_MASK;
+		off_hi = SIU_TEST_AGT_UPPER_ADDR(off);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = pci_base_offset(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = pci_base_offset(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
+		addr_hi = MIU_TEST_AGT_ADDR_HI;
+		data_lo = MIU_TEST_AGT_RDDATA_LO;
+		data_hi = MIU_TEST_AGT_RDDATA_HI;
+		off_lo = off & MIU_TEST_AGT_ADDR_MASK;
+		off_hi = 0;
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX) ||
+		ADDR_IN_RANGE(off, NETXEN_ADDR_OCM1, NETXEN_ADDR_OCM1_MAX)) {
+		if (adapter->ahw.pci_len0 != 0) {
+			return netxen_nic_pci_mem_access_direct(adapter,
+					off, data, 0);
+		}
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0[0] = off & 0x7;
-	off0[1] = 0;
-	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
-	sz[1] = size - sz[0];
-	loop = ((off0[0] + size - 1) >> 3) + 1;
+	spin_lock(&adapter->ahw.mem_lock);
+	netxen_nic_pci_set_crbwindow_128M(adapter, 0);
 
-	write_lock_irqsave(&adapter->adapter_lock, flags);
-	netxen_nic_pci_change_crbwindow_128M(adapter, 0);
+	writel(off_lo, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(off_hi, (mem_crb + addr_hi));
+	writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START|TA_CTL_ENABLE), (mem_crb + TEST_AGT_CTRL));
 
-	for (i = 0; i < loop; i++) {
-		writel((uint32_t)(off8 + (i << 3)),
-			(mem_crb+MIU_TEST_AGT_ADDR_LO));
-		writel(0,
-			(mem_crb+MIU_TEST_AGT_ADDR_HI));
-		writel(MIU_TA_CTL_ENABLE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-		writel(MIU_TA_CTL_START|MIU_TA_CTL_ENABLE,
-			(mem_crb+MIU_TEST_AGT_CTRL));
-
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(
-			      (mem_crb+MIU_TEST_AGT_CTRL));
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
-
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to read through agent\n");
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
-
-		start = off0[i] >> 2;
-		end   = (off0[i] + sz[i] - 1) >> 2;
-		for (k = start; k <= end; k++) {
-			word[i] |= ((uint64_t) readl(
-				    (mem_crb +
-				    MIU_TEST_AGT_RDDATA(k))) << (32*k));
-		}
 	}
 
-	netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	write_unlock_irqrestore(&adapter->adapter_lock, flags);
-
-	if (j >= MAX_CTL_CHECK)
-		return -1;
-
-	if (sz[0] == 8) {
-		val = word[0];
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+		ret = -EIO;
 	} else {
-		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
-			((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+
+		temp = readl(mem_crb + data_hi);
+		val = ((u64)temp << 32);
+		val |= readl(mem_crb + data_lo);
+		*data = val;
+		ret = 0;
 	}
 
-	switch (size) {
-	case 1:
-		*(uint8_t  *)data = val;
-		break;
-	case 2:
-		*(uint16_t *)data = val;
-		break;
-	case 4:
-		*(uint32_t *)data = val;
-		break;
-	case 8:
-		*(uint64_t *)data = val;
-		break;
-	}
-	return 0;
+	netxen_nic_pci_set_crbwindow_128M(adapter, NETXEN_WINDOW_ONE);
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
 }
 
 static int
 netxen_nic_pci_mem_write_2M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 data)
 {
-	int i, j, ret = 0, loop, sz[2], off0;
-	uint32_t temp;
-	uint64_t off8, tmpw, word[2] = {0, 0};
+	int i, j, ret;
+	u32 temp, off8;
+	u64 stride;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P3 onward, test agent base for MIU and SIU is same */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_QDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX))
+		return netxen_nic_pci_mem_access_direct(adapter, off, &data, 1);
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0 = off & 0x7;
-	sz[0] = (size < (8 - off0)) ? size : (8 - off0);
-	sz[1] = size - sz[0];
-	loop = ((off0 + size - 1) >> 3) + 1;
+	stride = NX_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
 
-	if ((size != 8) || (off0 != 0)) {
-		for (i = 0; i < loop; i++) {
-			if (adapter->pci_mem_read(adapter,
-					off8 + (i << 3), &word[i], 8))
-				return -1;
-		}
-	}
+	off8 = off & ~(stride-1);
 
-	switch (size) {
-	case 1:
-		tmpw = *((uint8_t *)data);
-		break;
-	case 2:
-		tmpw = *((uint16_t *)data);
-		break;
-	case 4:
-		tmpw = *((uint32_t *)data);
-		break;
-	case 8:
-	default:
-		tmpw = *((uint64_t *)data);
-	break;
-	}
+	spin_lock(&adapter->ahw.mem_lock);
 
-	word[0] &= ~((~(~0ULL << (sz[0] * 8))) << (off0 * 8));
-	word[0] |= tmpw << (off0 * 8);
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
 
-	if (loop == 2) {
-		word[1] &= ~(~0ULL << (sz[1] * 8));
-		word[1] |= tmpw >> (sz[0] * 8);
-	}
-
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
-
-	for (i = 0; i < loop; i++) {
-		writel(off8 + (i << 3), mem_crb+MIU_TEST_AGT_ADDR_LO);
-		writel(0, mem_crb+MIU_TEST_AGT_ADDR_HI);
-		writel(word[i] & 0xffffffff, mem_crb+MIU_TEST_AGT_WRDATA_LO);
-		writel((word[i] >> 32) & 0xffffffff,
-				mem_crb+MIU_TEST_AGT_WRDATA_HI);
-		writel((MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE),
-				mem_crb+MIU_TEST_AGT_CTRL);
-		writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE | MIU_TA_CTL_WRITE,
-				mem_crb+MIU_TEST_AGT_CTRL);
+	i = 0;
+	if (stride == 16) {
+		writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+		writel((TA_CTL_START | TA_CTL_ENABLE),
+				(mem_crb + TEST_AGT_CTRL));
 
 		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
+			temp = readl(mem_crb + TEST_AGT_CTRL);
+			if ((temp & TA_CTL_BUSY) == 0)
 				break;
 		}
 
 		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to write through agent\n");
-			ret = -1;
-			break;
+			ret = -EIO;
+			goto done;
 		}
+
+		i = (off & 0xf) ? 0 : 2;
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i));
+		writel(readl(mem_crb + MIU_TEST_AGT_RDDATA(i+1)),
+				mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+		i = (off & 0xf) ? 2 : 0;
 	}
 
-	/*
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	 */
+	writel(data & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i));
+	writel((data >> 32) & 0xffffffff,
+			mem_crb + MIU_TEST_AGT_WRDATA(i+1));
+
+	writel((TA_CTL_ENABLE | TA_CTL_WRITE), (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE | TA_CTL_WRITE),
+			(mem_crb + TEST_AGT_CTRL));
+
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
+			break;
+	}
+
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to write through agent\n");
+		ret = -EIO;
+	} else
+		ret = 0;
+
+done:
+	spin_unlock(&adapter->ahw.mem_lock);
+
 	return ret;
 }
 
 static int
 netxen_nic_pci_mem_read_2M(struct netxen_adapter *adapter,
-		u64 off, void *data, int size)
+		u64 off, u64 *data)
 {
-	int i, j = 0, k, start, end, loop, sz[2], off0[2];
-	uint32_t      temp;
-	uint64_t      off8, val, word[2] = {0, 0};
+	int j, ret;
+	u32 temp, off8;
+	u64 val, stride;
 	void __iomem *mem_crb;
 
-	if (size != 8)
+	/* Only 64-bit aligned access */
+	if (off & 7)
 		return -EIO;
 
+	/* P3 onward, test agent base for MIU and SIU is same */
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_QDR_NET,
 				NETXEN_ADDR_QDR_NET_MAX_P3)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_QDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_QDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
 	if (ADDR_IN_RANGE(off, NETXEN_ADDR_DDR_NET, NETXEN_ADDR_DDR_NET_MAX)) {
-		mem_crb = netxen_get_ioaddr(adapter, NETXEN_CRB_DDR_NET);
+		mem_crb = netxen_get_ioaddr(adapter,
+				NETXEN_CRB_DDR_NET+MIU_TEST_AGT_BASE);
 		goto correct;
 	}
 
+	if (ADDR_IN_RANGE(off, NETXEN_ADDR_OCM0, NETXEN_ADDR_OCM0_MAX)) {
+		return netxen_nic_pci_mem_access_direct(adapter,
+				off, data, 0);
+	}
+
 	return -EIO;
 
 correct:
-	off8 = off & 0xfffffff8;
-	off0[0] = off & 0x7;
-	off0[1] = 0;
-	sz[0] = (size < (8 - off0[0])) ? size : (8 - off0[0]);
-	sz[1] = size - sz[0];
-	loop = ((off0[0] + size - 1) >> 3) + 1;
+	stride = NX_IS_REVISION_P3P(adapter->ahw.revision_id) ? 16 : 8;
 
-	/*
-	 * don't lock here - write_wx gets the lock if each time
-	 * write_lock_irqsave(&adapter->adapter_lock, flags);
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 0);
-	 */
+	off8 = off & ~(stride-1);
 
-	for (i = 0; i < loop; i++) {
-		writel(off8 + (i << 3), mem_crb + MIU_TEST_AGT_ADDR_LO);
-		writel(0, mem_crb + MIU_TEST_AGT_ADDR_HI);
-		writel(MIU_TA_CTL_ENABLE, mem_crb + MIU_TEST_AGT_CTRL);
-		writel(MIU_TA_CTL_START | MIU_TA_CTL_ENABLE,
-				mem_crb + MIU_TEST_AGT_CTRL);
+	spin_lock(&adapter->ahw.mem_lock);
 
-		for (j = 0; j < MAX_CTL_CHECK; j++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_CTRL);
-			if ((temp & MIU_TA_CTL_BUSY) == 0)
-				break;
-		}
+	writel(off8, (mem_crb + MIU_TEST_AGT_ADDR_LO));
+	writel(0, (mem_crb + MIU_TEST_AGT_ADDR_HI));
+	writel(TA_CTL_ENABLE, (mem_crb + TEST_AGT_CTRL));
+	writel((TA_CTL_START | TA_CTL_ENABLE), (mem_crb + TEST_AGT_CTRL));
 
-		if (j >= MAX_CTL_CHECK) {
-			if (printk_ratelimit())
-				dev_err(&adapter->pdev->dev,
-					"failed to read through agent\n");
+	for (j = 0; j < MAX_CTL_CHECK; j++) {
+		temp = readl(mem_crb + TEST_AGT_CTRL);
+		if ((temp & TA_CTL_BUSY) == 0)
 			break;
-		}
-
-		start = off0[i] >> 2;
-		end   = (off0[i] + sz[i] - 1) >> 2;
-		for (k = start; k <= end; k++) {
-			temp = readl(mem_crb + MIU_TEST_AGT_RDDATA(k));
-			word[i] |= ((uint64_t)temp << (32 * k));
-		}
 	}
 
-	/*
-	 * netxen_nic_pci_change_crbwindow_128M(adapter, 1);
-	 * write_unlock_irqrestore(&adapter->adapter_lock, flags);
-	 */
-
-	if (j >= MAX_CTL_CHECK)
-		return -1;
-
-	if (sz[0] == 8) {
-		val = word[0];
+	if (j >= MAX_CTL_CHECK) {
+		if (printk_ratelimit())
+			dev_err(&adapter->pdev->dev,
+					"failed to read through agent\n");
+		ret = -EIO;
 	} else {
-		val = ((word[0] >> (off0[0] * 8)) & (~(~0ULL << (sz[0] * 8)))) |
-		((word[1] & (~(~0ULL << (sz[1] * 8)))) << (sz[0] * 8));
+		off8 = MIU_TEST_AGT_RDDATA_LO;
+		if ((stride == 16) && (off & 0xf))
+			off8 = MIU_TEST_AGT_RDDATA_UPPER_LO;
+
+		temp = readl(mem_crb + off8 + 4);
+		val = (u64)temp << 32;
+		val |= readl(mem_crb + off8);
+		*data = val;
+		ret = 0;
 	}
 
-	switch (size) {
-	case 1:
-		*(uint8_t  *)data = val;
-		break;
-	case 2:
-		*(uint16_t *)data = val;
-		break;
-	case 4:
-		*(uint32_t *)data = val;
-		break;
-	case 8:
-		*(uint64_t *)data = val;
-		break;
-	}
-	return 0;
+	spin_unlock(&adapter->ahw.mem_lock);
+
+	return ret;
 }
 
 void
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index e40b914..6ee27a6 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -46,6 +46,7 @@
 static void
 netxen_post_rx_buffers_nodb(struct netxen_adapter *adapter,
 		struct nx_host_rds_ring *rds_ring);
+static int netxen_p3_has_mn(struct netxen_adapter *adapter);
 
 static void crb_addr_transform_setup(void)
 {
@@ -437,7 +438,7 @@
 #define NETXEN_BOARDNUM 		0x400c
 #define NETXEN_CHIPNUM			0x4010
 
-int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose)
+int netxen_pinit_from_rom(struct netxen_adapter *adapter)
 {
 	int addr, val;
 	int i, n, init_delay = 0;
@@ -450,21 +451,6 @@
 	NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0xffffffff);
 	netxen_rom_unlock(adapter);
 
-	if (verbose) {
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDTYPE, &val) == 0)
-			printk("P2 ROM board type: 0x%08x\n", val);
-		else
-			printk("Could not read board type\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_BOARDNUM, &val) == 0)
-			printk("P2 ROM board  num: 0x%08x\n", val);
-		else
-			printk("Could not read board number\n");
-		if (netxen_rom_fast_read(adapter, NETXEN_CHIPNUM, &val) == 0)
-			printk("P2 ROM chip   num: 0x%08x\n", val);
-		else
-			printk("Could not read chip number\n");
-	}
-
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
 		if (netxen_rom_fast_read(adapter, 0, &n) != 0 ||
 			(n != 0xcafecafe) ||
@@ -486,11 +472,7 @@
 		n &= ~0x80000000;
 	}
 
-	if (n < 1024) {
-		if (verbose)
-			printk(KERN_DEBUG "%s: %d CRB init values found"
-			       " in ROM.\n", netxen_nic_driver_name, n);
-	} else {
+	if (n >= 1024) {
 		printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
 		       " initialized.\n", __func__, n);
 		return -EIO;
@@ -502,6 +484,7 @@
 				netxen_nic_driver_name);
 		return -ENOMEM;
 	}
+
 	for (i = 0; i < n; i++) {
 		if (netxen_rom_fast_read(adapter, 8*i + 4*offset, &val) != 0 ||
 		netxen_rom_fast_read(adapter, 8*i + 4*offset + 4, &addr) != 0) {
@@ -512,11 +495,8 @@
 		buf[i].addr = addr;
 		buf[i].data = val;
 
-		if (verbose)
-			printk(KERN_DEBUG "%s: PCI:     0x%08x == 0x%08x\n",
-				netxen_nic_driver_name,
-				(u32)netxen_decode_crb_addr(addr), val);
 	}
+
 	for (i = 0; i < n; i++) {
 
 		off = netxen_decode_crb_addr(buf[i].addr);
@@ -526,6 +506,10 @@
 			continue;
 		}
 		off += NETXEN_PCI_CRBSPACE;
+
+		if (off & 1)
+			continue;
+
 		/* skipping cold reboot MAGIC */
 		if (off == NETXEN_CAM_RAM(0x1fc))
 			continue;
@@ -544,7 +528,8 @@
 				continue;
 			if (off == (ROMUSB_GLB + 0x1c)) /* MS clock */
 				continue;
-			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18))
+			if (off == (NETXEN_CRB_PEG_NET_1 + 0x18) &&
+				!NX_IS_REVISION_P3P(adapter->ahw.revision_id))
 				buf[i].data = 0x1020;
 			/* skip the function enable register */
 			if (off == NETXEN_PCIE_REG(PCIE_SETUP_FUNCTION))
@@ -605,6 +590,172 @@
 	return 0;
 }
 
+static struct uni_table_desc *nx_get_table_desc(const u8 *unirom, int section)
+{
+	uint32_t i;
+	struct uni_table_desc *directory = (struct uni_table_desc *) &unirom[0];
+	__le32 entries = cpu_to_le32(directory->num_entries);
+
+	for (i = 0; i < entries; i++) {
+
+		__le32 offs = cpu_to_le32(directory->findex) +
+				(i * cpu_to_le32(directory->entry_size));
+		__le32 tab_type = cpu_to_le32(*((u32 *)&unirom[offs] + 8));
+
+		if (tab_type == section)
+			return (struct uni_table_desc *) &unirom[offs];
+	}
+
+	return NULL;
+}
+
+static int
+nx_set_product_offs(struct netxen_adapter *adapter)
+{
+	struct uni_table_desc *ptab_descr;
+	const u8 *unirom = adapter->fw->data;
+	uint32_t i;
+	__le32 entries;
+
+	ptab_descr = nx_get_table_desc(unirom, NX_UNI_DIR_SECT_PRODUCT_TBL);
+	if (ptab_descr == NULL)
+		return -1;
+
+	entries = cpu_to_le32(ptab_descr->num_entries);
+
+	for (i = 0; i < entries; i++) {
+
+		__le32 flags, file_chiprev, offs;
+		u8 chiprev = adapter->ahw.revision_id;
+		int mn_present = netxen_p3_has_mn(adapter);
+		uint32_t flagbit;
+
+		offs = cpu_to_le32(ptab_descr->findex) +
+				(i * cpu_to_le32(ptab_descr->entry_size));
+		flags = cpu_to_le32(*((int *)&unirom[offs] + NX_UNI_FLAGS_OFF));
+		file_chiprev = cpu_to_le32(*((int *)&unirom[offs] +
+							NX_UNI_CHIP_REV_OFF));
+
+		flagbit = mn_present ? 1 : 2;
+
+		if ((chiprev == file_chiprev) &&
+					((1ULL << flagbit) & flags)) {
+			adapter->file_prd_off = offs;
+			return 0;
+		}
+	}
+
+	return -1;
+}
+
+
+static struct uni_data_desc *nx_get_data_desc(struct netxen_adapter *adapter,
+			u32 section, u32 idx_offset)
+{
+	const u8 *unirom = adapter->fw->data;
+	int idx = cpu_to_le32(*((int *)&unirom[adapter->file_prd_off] +
+								idx_offset));
+	struct uni_table_desc *tab_desc;
+	__le32 offs;
+
+	tab_desc = nx_get_table_desc(unirom, section);
+
+	if (tab_desc == NULL)
+		return NULL;
+
+	offs = cpu_to_le32(tab_desc->findex) +
+			(cpu_to_le32(tab_desc->entry_size) * idx);
+
+	return (struct uni_data_desc *)&unirom[offs];
+}
+
+static u8 *
+nx_get_bootld_offs(struct netxen_adapter *adapter)
+{
+	u32 offs = NETXEN_BOOTLD_START;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_BOOTLD,
+					NX_UNI_BOOTLD_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static u8 *
+nx_get_fw_offs(struct netxen_adapter *adapter)
+{
+	u32 offs = NETXEN_IMAGE_START;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		offs = cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_FW,
+					NX_UNI_FIRMWARE_IDX_OFF))->findex);
+
+	return (u8 *)&adapter->fw->data[offs];
+}
+
+static __le32
+nx_get_fw_size(struct netxen_adapter *adapter)
+{
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE)
+		return cpu_to_le32((nx_get_data_desc(adapter,
+					NX_UNI_DIR_SECT_FW,
+					NX_UNI_FIRMWARE_IDX_OFF))->size);
+	else
+		return cpu_to_le32(
+				*(u32 *)&adapter->fw->data[NX_FW_SIZE_OFFSET]);
+}
+
+static __le32
+nx_get_fw_version(struct netxen_adapter *adapter)
+{
+	struct uni_data_desc *fw_data_desc;
+	const struct firmware *fw = adapter->fw;
+	__le32 major, minor, sub;
+	const u8 *ver_str;
+	int i, ret = 0;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE) {
+
+		fw_data_desc = nx_get_data_desc(adapter,
+				NX_UNI_DIR_SECT_FW, NX_UNI_FIRMWARE_IDX_OFF);
+		ver_str = fw->data + cpu_to_le32(fw_data_desc->findex) +
+				cpu_to_le32(fw_data_desc->size) - 17;
+
+		for (i = 0; i < 12; i++) {
+			if (!strncmp(&ver_str[i], "REV=", 4)) {
+				ret = sscanf(&ver_str[i+4], "%u.%u.%u ",
+							&major, &minor, &sub);
+				break;
+			}
+		}
+
+		if (ret != 3)
+			return 0;
+
+		return major + (minor << 8) + (sub << 16);
+
+	} else
+		return cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+}
+
+static __le32
+nx_get_bios_version(struct netxen_adapter *adapter)
+{
+	const struct firmware *fw = adapter->fw;
+	__le32 bios_ver, prd_off = adapter->file_prd_off;
+
+	if (adapter->fw_type == NX_UNIFIED_ROMIMAGE) {
+		bios_ver = cpu_to_le32(*((u32 *) (&fw->data[prd_off])
+						+ NX_UNI_BIOS_VERSION_OFF));
+		return (bios_ver << 24) + ((bios_ver >> 8) & 0xff00) +
+							(bios_ver >> 24);
+	} else
+		return cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+
+}
+
 int
 netxen_need_fw_reset(struct netxen_adapter *adapter)
 {
@@ -644,9 +795,8 @@
 	/* check if we have got newer or different file firmware */
 	if (adapter->fw) {
 
-		const struct firmware *fw = adapter->fw;
+		val = nx_get_fw_version(adapter);
 
-		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
 		version = NETXEN_DECODE_VERSION(val);
 
 		major = NXRD32(adapter, NETXEN_FW_VERSION_MAJOR);
@@ -656,7 +806,8 @@
 		if (version > NETXEN_VERSION_CODE(major, minor, build))
 			return 1;
 
-		if (version == NETXEN_VERSION_CODE(major, minor, build)) {
+		if (version == NETXEN_VERSION_CODE(major, minor, build) &&
+			adapter->fw_type != NX_UNIFIED_ROMIMAGE) {
 
 			val = NXRD32(adapter, NETXEN_MIU_MN_CONTROL);
 			fw_type = (val & 0x4) ?
@@ -671,7 +822,11 @@
 }
 
 static char *fw_name[] = {
-	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+	NX_P2_MN_ROMIMAGE_NAME,
+	NX_P3_CT_ROMIMAGE_NAME,
+	NX_P3_MN_ROMIMAGE_NAME,
+	NX_UNIFIED_ROMIMAGE_NAME,
+	NX_FLASH_ROMIMAGE_NAME,
 };
 
 int
@@ -693,26 +848,28 @@
 
 		size = (NETXEN_IMAGE_START - NETXEN_BOOTLD_START) / 8;
 
-		ptr64 = (u64 *)&fw->data[NETXEN_BOOTLD_START];
+		ptr64 = (u64 *)nx_get_bootld_offs(adapter);
 		flashaddr = NETXEN_BOOTLD_START;
 
 		for (i = 0; i < size; i++) {
 			data = cpu_to_le64(ptr64[i]);
-			adapter->pci_mem_write(adapter, flashaddr, &data, 8);
+
+			if (adapter->pci_mem_write(adapter, flashaddr, data))
+				return -EIO;
+
 			flashaddr += 8;
 		}
 
-		size = *(u32 *)&fw->data[NX_FW_SIZE_OFFSET];
-		size = (__force u32)cpu_to_le32(size) / 8;
+		size = (__force u32)nx_get_fw_size(adapter) / 8;
 
-		ptr64 = (u64 *)&fw->data[NETXEN_IMAGE_START];
+		ptr64 = (u64 *)nx_get_fw_offs(adapter);
 		flashaddr = NETXEN_IMAGE_START;
 
 		for (i = 0; i < size; i++) {
 			data = cpu_to_le64(ptr64[i]);
 
 			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
+						flashaddr, data))
 				return -EIO;
 
 			flashaddr += 8;
@@ -726,17 +883,17 @@
 
 		for (i = 0; i < size; i++) {
 			if (netxen_rom_fast_read(adapter,
-					flashaddr, &lo) != 0)
+					flashaddr, (int *)&lo) != 0)
 				return -EIO;
 			if (netxen_rom_fast_read(adapter,
-					flashaddr + 4, &hi) != 0)
+					flashaddr + 4, (int *)&hi) != 0)
 				return -EIO;
 
 			/* hi, lo are already in host endian byteorder */
 			data = (((u64)hi << 32) | lo);
 
 			if (adapter->pci_mem_write(adapter,
-						flashaddr, &data, 8))
+						flashaddr, data))
 				return -EIO;
 
 			flashaddr += 8;
@@ -744,7 +901,10 @@
 	}
 	msleep(1);
 
-	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		NXWR32(adapter, NETXEN_CRB_PEG_NET_0 + 0x18, 0x1020);
+		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001e);
+	} else if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_SW_RESET, 0x80001d);
 	else {
 		NXWR32(adapter, NETXEN_ROMUSB_GLB_CHIP_CLK_CTRL, 0x3fff);
@@ -755,21 +915,31 @@
 }
 
 static int
-netxen_validate_firmware(struct netxen_adapter *adapter, const char *fwname)
+netxen_validate_firmware(struct netxen_adapter *adapter)
 {
 	__le32 val;
-	u32 ver, min_ver, bios;
+	u32 ver, min_ver, bios, min_size;
 	struct pci_dev *pdev = adapter->pdev;
 	const struct firmware *fw = adapter->fw;
+	u8 fw_type = adapter->fw_type;
 
-	if (fw->size < NX_FW_MIN_SIZE)
+	if (fw_type == NX_UNIFIED_ROMIMAGE) {
+		if (nx_set_product_offs(adapter))
+			return -EINVAL;
+
+		min_size = NX_UNI_FW_MIN_SIZE;
+	} else {
+		val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
+		if ((__force u32)val != NETXEN_BDINFO_MAGIC)
+			return -EINVAL;
+
+		min_size = NX_FW_MIN_SIZE;
+	}
+
+	if (fw->size < min_size)
 		return -EINVAL;
 
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_MAGIC_OFFSET]);
-	if ((__force u32)val != NETXEN_BDINFO_MAGIC)
-		return -EINVAL;
-
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_FW_VERSION_OFFSET]);
+	val = nx_get_fw_version(adapter);
 
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		min_ver = NETXEN_VERSION_CODE(4, 0, 216);
@@ -781,15 +951,15 @@
 	if ((_major(ver) > _NETXEN_NIC_LINUX_MAJOR) || (ver < min_ver)) {
 		dev_err(&pdev->dev,
 				"%s: firmware version %d.%d.%d unsupported\n",
-				fwname, _major(ver), _minor(ver), _build(ver));
+		fw_name[fw_type], _major(ver), _minor(ver), _build(ver));
 		return -EINVAL;
 	}
 
-	val = cpu_to_le32(*(u32 *)&fw->data[NX_BIOS_VERSION_OFFSET]);
+	val = nx_get_bios_version(adapter);
 	netxen_rom_fast_read(adapter, NX_BIOS_VERSION_OFFSET, (int *)&bios);
 	if ((__force u32)val != bios) {
 		dev_err(&pdev->dev, "%s: firmware bios is incompatible\n",
-				fwname);
+				fw_name[fw_type]);
 		return -EINVAL;
 	}
 
@@ -800,7 +970,7 @@
 	val = NETXEN_DECODE_VERSION(val);
 	if (val > ver) {
 		dev_info(&pdev->dev, "%s: firmware is older than flash\n",
-				fwname);
+				fw_name[fw_type]);
 		return -EINVAL;
 	}
 
@@ -808,6 +978,41 @@
 	return 0;
 }
 
+static void
+nx_get_next_fwtype(struct netxen_adapter *adapter)
+{
+	u8 fw_type;
+
+	switch (adapter->fw_type) {
+	case NX_UNKNOWN_ROMIMAGE:
+		fw_type = NX_UNIFIED_ROMIMAGE;
+		break;
+
+	case NX_UNIFIED_ROMIMAGE:
+		if (NX_IS_REVISION_P3P(adapter->ahw.revision_id))
+			fw_type = NX_FLASH_ROMIMAGE;
+		else if (NX_IS_REVISION_P2(adapter->ahw.revision_id))
+			fw_type = NX_P2_MN_ROMIMAGE;
+		else if (netxen_p3_has_mn(adapter))
+			fw_type = NX_P3_MN_ROMIMAGE;
+		else
+			fw_type = NX_P3_CT_ROMIMAGE;
+		break;
+
+	case NX_P3_MN_ROMIMAGE:
+		fw_type = NX_P3_CT_ROMIMAGE;
+		break;
+
+	case NX_P2_MN_ROMIMAGE:
+	case NX_P3_CT_ROMIMAGE:
+	default:
+		fw_type = NX_FLASH_ROMIMAGE;
+		break;
+	}
+
+	adapter->fw_type = fw_type;
+}
+
 static int
 netxen_p3_has_mn(struct netxen_adapter *adapter)
 {
@@ -829,49 +1034,29 @@
 
 void netxen_request_firmware(struct netxen_adapter *adapter)
 {
-	u8 fw_type;
 	struct pci_dev *pdev = adapter->pdev;
 	int rc = 0;
 
-	if (NX_IS_REVISION_P2(adapter->ahw.revision_id)) {
-		fw_type = NX_P2_MN_ROMIMAGE;
-		goto request_fw;
-	}
+	adapter->fw_type = NX_UNKNOWN_ROMIMAGE;
 
-	fw_type = netxen_p3_has_mn(adapter) ?
-		NX_P3_MN_ROMIMAGE : NX_P3_CT_ROMIMAGE;
+next:
+	nx_get_next_fwtype(adapter);
 
-request_fw:
-	rc = request_firmware(&adapter->fw, fw_name[fw_type], &pdev->dev);
-	if (rc != 0) {
-		if (fw_type == NX_P3_MN_ROMIMAGE) {
-			msleep(1);
-			fw_type = NX_P3_CT_ROMIMAGE;
-			goto request_fw;
-		}
-
-		fw_type = NX_FLASH_ROMIMAGE;
+	if (adapter->fw_type == NX_FLASH_ROMIMAGE) {
 		adapter->fw = NULL;
-		goto done;
-	}
+	} else {
+		rc = request_firmware(&adapter->fw,
+				fw_name[adapter->fw_type], &pdev->dev);
+		if (rc != 0)
+			goto next;
 
-	rc = netxen_validate_firmware(adapter, fw_name[fw_type]);
-	if (rc != 0) {
-		release_firmware(adapter->fw);
-
-		if (fw_type == NX_P3_MN_ROMIMAGE) {
+		rc = netxen_validate_firmware(adapter);
+		if (rc != 0) {
+			release_firmware(adapter->fw);
 			msleep(1);
-			fw_type = NX_P3_CT_ROMIMAGE;
-			goto request_fw;
+			goto next;
 		}
-
-		fw_type = NX_FLASH_ROMIMAGE;
-		adapter->fw = NULL;
-		goto done;
 	}
-
-done:
-	adapter->fw_type = fw_type;
 }
 
 
@@ -1506,10 +1691,8 @@
 					      (rds_ring->num_desc - 1)));
 			netxen_set_msg_ctxid(msg, adapter->portnum);
 			netxen_set_msg_opcode(msg, NETXEN_RCV_PRODUCER(ringid));
-			read_lock(&adapter->adapter_lock);
-			writel(msg, DB_NORMALIZE(adapter,
-					    NETXEN_RCV_PRODUCER_OFFSET));
-			read_unlock(&adapter->adapter_lock);
+			NXWRIO(adapter, DB_NORMALIZE(adapter,
+					NETXEN_RCV_PRODUCER_OFFSET), msg);
 		}
 	}
 }
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 0b4a56a..12d1037 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -34,13 +34,18 @@
 #include <net/ip.h>
 #include <linux/ipv6.h>
 #include <linux/inetdevice.h>
+#include <linux/sysfs.h>
 
-MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
+MODULE_DESCRIPTION("QLogic/NetXen (1/10) GbE Converged Ethernet Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
+MODULE_FIRMWARE(NX_P2_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_CT_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
 
 char netxen_nic_driver_name[] = "netxen_nic";
-static char netxen_nic_driver_string[] = "NetXen Network Driver version "
+static char netxen_nic_driver_string[] = "QLogic/NetXen Network Driver v"
     NETXEN_NIC_LINUX_VERSIONID;
 
 static int port_mode = NETXEN_PORT_MODE_AUTO_NEG;
@@ -52,7 +57,8 @@
 
 static int use_msi_x = 1;
 
-/* Local functions to NetXen NIC driver */
+static unsigned long auto_fw_reset = AUTO_FW_RESET_ENABLED;
+
 static int __devinit netxen_nic_probe(struct pci_dev *pdev,
 		const struct pci_device_id *ent);
 static void __devexit netxen_nic_remove(struct pci_dev *pdev);
@@ -73,6 +79,8 @@
 
 static void netxen_create_sysfs_entries(struct netxen_adapter *adapter);
 static void netxen_remove_sysfs_entries(struct netxen_adapter *adapter);
+static void netxen_create_diag_entries(struct netxen_adapter *adapter);
+static void netxen_remove_diag_entries(struct netxen_adapter *adapter);
 
 static int nx_decr_dev_ref_cnt(struct netxen_adapter *adapter);
 static int netxen_can_start_firmware(struct netxen_adapter *adapter);
@@ -87,6 +95,11 @@
 #define ENTRY(device) \
 	{PCI_DEVICE(PCI_VENDOR_ID_NETXEN, (device)), \
 	.class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
+#define ENTRY2(device) \
+	{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, (device)), \
+	.class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0}
+
+#define PCI_DEVICE_ID_QLOGIC_QLE824X	0x8020
 
 static struct pci_device_id netxen_pci_tbl[] __devinitdata = {
 	ENTRY(PCI_DEVICE_ID_NX2031_10GXSR),
@@ -97,6 +110,7 @@
 	ENTRY(PCI_DEVICE_ID_NX2031_XG_MGMT),
 	ENTRY(PCI_DEVICE_ID_NX2031_XG_MGMT2),
 	ENTRY(PCI_DEVICE_ID_NX3031),
+	ENTRY2(PCI_DEVICE_ID_QLOGIC_QLE824X),
 	{0,}
 };
 
@@ -607,14 +621,12 @@
 	 * Set the CRB window to invalid. If any register in window 0 is
 	 * accessed it should set the window to 0 and then reset it to 1.
 	 */
-	adapter->curr_window = 255;
-	adapter->ahw.qdr_sn_window = -1;
-	adapter->ahw.ddr_mn_window = -1;
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
 
 	/* remap phys address */
 	mem_base = pci_resource_start(pdev, 0);	/* 0 is for BAR 0 */
 	mem_len = pci_resource_len(pdev, 0);
-	pci_len0 = 0;
 
 	/* 128 Meg of memory */
 	if (mem_len == NETXEN_PCI_128MB_SIZE) {
@@ -623,6 +635,7 @@
 				SECOND_PAGE_GROUP_SIZE);
 		mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START,
 				THIRD_PAGE_GROUP_SIZE);
+		pci_len0 = FIRST_PAGE_GROUP_SIZE;
 	} else if (mem_len == NETXEN_PCI_32MB_SIZE) {
 		mem_ptr1 = ioremap(mem_base, SECOND_PAGE_GROUP_SIZE);
 		mem_ptr2 = ioremap(mem_base + THIRD_PAGE_GROUP_START -
@@ -635,19 +648,6 @@
 			return -EIO;
 		}
 		pci_len0 = mem_len;
-
-		adapter->ahw.ddr_mn_window = 0;
-		adapter->ahw.qdr_sn_window = 0;
-
-		adapter->ahw.mn_win_crb = NETXEN_PCI_CRBSPACE +
-			0x100000 + PCIX_MN_WINDOW + (pci_func * 0x20);
-		adapter->ahw.ms_win_crb = NETXEN_PCI_CRBSPACE +
-			0x100000 + PCIX_SN_WINDOW;
-		if (pci_func < 4)
-			adapter->ahw.ms_win_crb += (pci_func * 0x20);
-		else
-			adapter->ahw.ms_win_crb +=
-					0xA0 + ((pci_func - 4) * 0x10);
 	} else {
 		return -EIO;
 	}
@@ -661,6 +661,15 @@
 	adapter->ahw.pci_base1 = mem_ptr1;
 	adapter->ahw.pci_base2 = mem_ptr2;
 
+	if (NX_IS_REVISION_P3P(adapter->ahw.revision_id)) {
+		adapter->ahw.ocm_win_crb = netxen_get_ioaddr(adapter,
+			NETXEN_PCIX_PS_REG(PCIX_OCM_WINDOW_REG(pci_func)));
+
+	} else if (NX_IS_REVISION_P3(adapter->ahw.revision_id)) {
+		adapter->ahw.ocm_win_crb = netxen_get_ioaddr(adapter,
+			NETXEN_PCIX_PS_REG(PCIE_MN_WINDOW_REG(pci_func)));
+	}
+
 	if (NX_IS_REVISION_P3(adapter->ahw.revision_id))
 		goto skip_doorbell;
 
@@ -725,7 +734,8 @@
 	if (adapter->portnum == 0) {
 		get_brd_name_by_type(adapter->ahw.board_type, brd_name);
 
-		printk(KERN_INFO "NetXen %s Board S/N %s  Chip rev 0x%x\n",
+		pr_info("%s: %s Board S/N %s  Chip rev 0x%x\n",
+				module_name(THIS_MODULE),
 				brd_name, serial_num, adapter->ahw.revision_id);
 	}
 
@@ -817,7 +827,7 @@
 
 	if (first_boot != 0x55555555) {
 		NXWR32(adapter, CRB_CMDPEG_STATE, 0);
-		netxen_pinit_from_rom(adapter, 0);
+		netxen_pinit_from_rom(adapter);
 		msleep(1);
 	}
 
@@ -1207,16 +1217,10 @@
 	int pci_func_id = PCI_FUNC(pdev->devfn);
 	uint8_t revision_id;
 
-	if (pdev->class != 0x020000) {
-		printk(KERN_DEBUG "NetXen function %d, class %x will not "
-				"be enabled.\n",pci_func_id, pdev->class);
-		return -ENODEV;
-	}
-
 	if (pdev->revision >= NX_P3_A0 && pdev->revision < NX_P3_B1) {
-		printk(KERN_WARNING "NetXen chip revisions between 0x%x-0x%x"
+		pr_warning("%s: chip revisions between 0x%x-0x%x"
 				"will not be enabled.\n",
-				NX_P3_A0, NX_P3_B1);
+				module_name(THIS_MODULE), NX_P3_A0, NX_P3_B1);
 		return -ENODEV;
 	}
 
@@ -1250,7 +1254,9 @@
 	revision_id = pdev->revision;
 	adapter->ahw.revision_id = revision_id;
 
-	rwlock_init(&adapter->adapter_lock);
+	rwlock_init(&adapter->ahw.crb_lock);
+	spin_lock_init(&adapter->ahw.mem_lock);
+
 	spin_lock_init(&adapter->tx_clean_lock);
 	INIT_LIST_HEAD(&adapter->mac_list);
 
@@ -1315,6 +1321,8 @@
 		break;
 	}
 
+	netxen_create_diag_entries(adapter);
+
 	return 0;
 
 err_out_disable_msi:
@@ -1367,6 +1375,8 @@
 
 	netxen_teardown_intr(adapter);
 
+	netxen_remove_diag_entries(adapter);
+
 	netxen_cleanup_pci_map(adapter);
 
 	netxen_release_firmware(adapter);
@@ -1447,7 +1457,8 @@
 	if (err)
 		return err;
 
-	adapter->curr_window = 255;
+	adapter->ahw.crb_win = -1;
+	adapter->ahw.ocm_win = -1;
 
 	err = netxen_start_firmware(adapter);
 	if (err) {
@@ -1925,7 +1936,7 @@
 struct net_device_stats *netxen_nic_get_stats(struct net_device *netdev)
 {
 	struct netxen_adapter *adapter = netdev_priv(netdev);
-	struct net_device_stats *stats = &adapter->net_stats;
+	struct net_device_stats *stats = &netdev->stats;
 
 	memset(stats, 0, sizeof(*stats));
 
@@ -2261,7 +2272,8 @@
 	dev_info(&netdev->dev, "firmware hang detected\n");
 
 detach:
-	if (!test_and_set_bit(__NX_RESETTING, &adapter->state))
+	if ((auto_fw_reset == AUTO_FW_RESET_ENABLED) &&
+			!test_and_set_bit(__NX_RESETTING, &adapter->state))
 		netxen_schedule_work(adapter, netxen_detach_work, 0);
 	return 1;
 }
@@ -2339,6 +2351,197 @@
        .store = netxen_store_bridged_mode,
 };
 
+static ssize_t
+netxen_store_diag_mode(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	unsigned long new;
+
+	if (strict_strtoul(buf, 2, &new))
+		return -EINVAL;
+
+	if (!!new != !!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		adapter->flags ^= NETXEN_NIC_DIAG_ENABLED;
+
+	return len;
+}
+
+static ssize_t
+netxen_show_diag_mode(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%d\n",
+			!!(adapter->flags & NETXEN_NIC_DIAG_ENABLED));
+}
+
+static struct device_attribute dev_attr_diag_mode = {
+	.attr = {.name = "diag_mode", .mode = (S_IRUGO | S_IWUSR)},
+	.show = netxen_show_diag_mode,
+	.store = netxen_store_diag_mode,
+};
+
+static int
+netxen_sysfs_validate_crb(struct netxen_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 4) || (offset & 0x3))
+		return  -EINVAL;
+
+	if (offset < NETXEN_PCI_CRBSPACE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ssize_t
+netxen_sysfs_read_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	data = NXRD32(adapter, offset);
+	memcpy(buf, &data, size);
+	return size;
+}
+
+static ssize_t
+netxen_sysfs_write_crb(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u32 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_crb(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+	NXWR32(adapter, offset, data);
+	return size;
+}
+
+static int
+netxen_sysfs_validate_mem(struct netxen_adapter *adapter,
+		loff_t offset, size_t size)
+{
+	if (!(adapter->flags & NETXEN_NIC_DIAG_ENABLED))
+		return -EIO;
+
+	if ((size != 8) || (offset & 0x7))
+		return  -EIO;
+
+	return 0;
+}
+
+static ssize_t
+netxen_sysfs_read_mem(struct kobject *kobj, struct bin_attribute *attr,
+		char *buf, loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	if (adapter->pci_mem_read(adapter, offset, &data))
+		return -EIO;
+
+	memcpy(buf, &data, size);
+
+	return size;
+}
+
+ssize_t netxen_sysfs_write_mem(struct kobject *kobj,
+		struct bin_attribute *attr, char *buf,
+		loff_t offset, size_t size)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct netxen_adapter *adapter = dev_get_drvdata(dev);
+	u64 data;
+	int ret;
+
+	ret = netxen_sysfs_validate_mem(adapter, offset, size);
+	if (ret != 0)
+		return ret;
+
+	memcpy(&data, buf, size);
+
+	if (adapter->pci_mem_write(adapter, offset, data))
+		return -EIO;
+
+	return size;
+}
+
+
+static struct bin_attribute bin_attr_crb = {
+	.attr = {.name = "crb", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = netxen_sysfs_read_crb,
+	.write = netxen_sysfs_write_crb,
+};
+
+static struct bin_attribute bin_attr_mem = {
+	.attr = {.name = "mem", .mode = (S_IRUGO | S_IWUSR)},
+	.size = 0,
+	.read = netxen_sysfs_read_mem,
+	.write = netxen_sysfs_write_mem,
+};
+
+#ifdef CONFIG_MODULES
+static ssize_t
+netxen_store_auto_fw_reset(struct module_attribute *mattr,
+		struct module *mod, const char *buf, size_t count)
+
+{
+	unsigned long new;
+
+	if (strict_strtoul(buf, 16, &new))
+		return -EINVAL;
+
+	if ((new == AUTO_FW_RESET_ENABLED) || (new == AUTO_FW_RESET_DISABLED)) {
+		auto_fw_reset = new;
+		return count;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t
+netxen_show_auto_fw_reset(struct module_attribute *mattr,
+		struct module *mod, char *buf)
+
+{
+	if (auto_fw_reset == AUTO_FW_RESET_ENABLED)
+		return sprintf(buf, "enabled\n");
+	else
+		return sprintf(buf, "disabled\n");
+}
+
+static struct module_attribute mod_attr_fw_reset = {
+	.attr = {.name = "auto_fw_reset", .mode = (S_IRUGO | S_IWUSR)},
+	.show = netxen_show_auto_fw_reset,
+	.store = netxen_store_auto_fw_reset,
+};
+#endif
+
 static void
 netxen_create_sysfs_entries(struct netxen_adapter *adapter)
 {
@@ -2364,6 +2567,33 @@
 		device_remove_file(dev, &dev_attr_bridged_mode);
 }
 
+static void
+netxen_create_diag_entries(struct netxen_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev;
+
+	dev = &pdev->dev;
+	if (device_create_file(dev, &dev_attr_diag_mode))
+		dev_info(dev, "failed to create diag_mode sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_crb))
+		dev_info(dev, "failed to create crb sysfs entry\n");
+	if (device_create_bin_file(dev, &bin_attr_mem))
+		dev_info(dev, "failed to create mem sysfs entry\n");
+}
+
+
+static void
+netxen_remove_diag_entries(struct netxen_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct device *dev = &pdev->dev;
+
+	device_remove_file(dev, &dev_attr_diag_mode);
+	device_remove_bin_file(dev, &bin_attr_crb);
+	device_remove_bin_file(dev, &bin_attr_mem);
+}
+
 #ifdef CONFIG_INET
 
 #define is_netxen_netdev(dev) (dev->netdev_ops == &netxen_netdev_ops)
@@ -2516,6 +2746,10 @@
 
 static int __init netxen_init_module(void)
 {
+#ifdef CONFIG_MODULES
+	struct module *mod = THIS_MODULE;
+#endif
+
 	printk(KERN_INFO "%s\n", netxen_nic_driver_string);
 
 #ifdef CONFIG_INET
@@ -2523,6 +2757,12 @@
 	register_inetaddr_notifier(&netxen_inetaddr_cb);
 #endif
 
+#ifdef CONFIG_MODULES
+	if (sysfs_create_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr))
+		printk(KERN_ERR "%s: Failed to create auto_fw_reset "
+				"sysfs entry.", netxen_nic_driver_name);
+#endif
+
 	return pci_register_driver(&netxen_driver);
 }
 
@@ -2530,6 +2770,12 @@
 
 static void __exit netxen_exit_module(void)
 {
+#ifdef CONFIG_MODULES
+	struct module *mod = THIS_MODULE;
+
+	sysfs_remove_file(&mod->mkobj.kobj, &mod_attr_fw_reset.attr);
+#endif
+
 	pci_unregister_driver(&netxen_driver);
 
 #ifdef CONFIG_INET
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index d6c7ac6..5506f87 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -7855,10 +7855,13 @@
 	}
 }
 
-static int niu_get_stats_count(struct net_device *dev)
+static int niu_get_sset_count(struct net_device *dev, int stringset)
 {
 	struct niu *np = netdev_priv(dev);
 
+	if (stringset != ETH_SS_STATS)
+		return -EINVAL;
+
 	return ((np->flags & NIU_FLAGS_XMAC ?
 		 NUM_XMAC_STAT_KEYS :
 		 NUM_BMAC_STAT_KEYS) +
@@ -7978,7 +7981,7 @@
 	.get_settings		= niu_get_settings,
 	.set_settings		= niu_set_settings,
 	.get_strings		= niu_get_strings,
-	.get_stats_count	= niu_get_stats_count,
+	.get_sset_count		= niu_get_sset_count,
 	.get_ethtool_stats	= niu_get_ethtool_stats,
 	.phys_id		= niu_phys_id,
 	.get_rxnfc		= niu_get_nfc,
diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
index 28a8622..fefa79e 100644
--- a/drivers/net/pasemi_mac_ethtool.c
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -77,6 +77,19 @@
 	return phy_ethtool_gset(phydev, cmd);
 }
 
+static int
+pasemi_mac_ethtool_set_settings(struct net_device *netdev,
+			       struct ethtool_cmd *cmd)
+{
+	struct pasemi_mac *mac = netdev_priv(netdev);
+	struct phy_device *phydev = mac->phydev;
+
+	if (!phydev)
+		return -EOPNOTSUPP;
+
+	return phy_ethtool_sset(phydev, cmd);
+}
+
 static void
 pasemi_mac_ethtool_get_drvinfo(struct net_device *netdev,
 			       struct ethtool_drvinfo *drvinfo)
@@ -150,6 +163,7 @@
 
 const struct ethtool_ops pasemi_mac_ethtool_ops = {
 	.get_settings		= pasemi_mac_ethtool_get_settings,
+	.set_settings		= pasemi_mac_ethtool_set_settings,
 	.get_drvinfo		= pasemi_mac_ethtool_get_drvinfo,
 	.get_msglevel		= pasemi_mac_ethtool_get_msglevel,
 	.set_msglevel		= pasemi_mac_ethtool_set_msglevel,
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index f81e532..f63c96a 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -16,6 +16,7 @@
 
 #include <linux/module.h>
 #include <linux/phy.h>
+#include <linux/brcmphy.h>
 
 #define PHY_ID_BCM50610		0x0143bd60
 #define PHY_ID_BCM50610M	0x0143bd70
@@ -24,6 +25,9 @@
 #define BRCM_PHY_MODEL(phydev) \
 	((phydev)->drv->phy_id & (phydev)->drv->phy_id_mask)
 
+#define BRCM_PHY_REV(phydev) \
+	((phydev)->drv->phy_id & ~((phydev)->drv->phy_id_mask))
+
 
 #define MII_BCM54XX_ECR		0x10	/* BCM54xx extended control register */
 #define MII_BCM54XX_ECR_IM	0x1000	/* Interrupt mask */
@@ -94,22 +98,35 @@
 #define BCM_LED_SRC_OFF		0xe	/* Tied high */
 #define BCM_LED_SRC_ON		0xf	/* Tied low */
 
+
 /*
  * BCM5482: Shadow registers
  * Shadow values go into bits [14:10] of register 0x1c to select a shadow
  * register to access.
  */
+/* 00101: Spare Control Register 3 */
+#define BCM54XX_SHD_SCR3		0x05
+#define  BCM54XX_SHD_SCR3_DEF_CLK125	0x0001
+#define  BCM54XX_SHD_SCR3_DLLAPD_DIS	0x0002
+#define  BCM54XX_SHD_SCR3_TRDDAPD	0x0004
+
+/* 01010: Auto Power-Down */
+#define BCM54XX_SHD_APD			0x0a
+#define  BCM54XX_SHD_APD_EN		0x0020
+
 #define BCM5482_SHD_LEDS1	0x0d	/* 01101: LED Selector 1 */
 					/* LED3 / ~LINKSPD[2] selector */
 #define BCM5482_SHD_LEDS1_LED3(src)	((src & 0xf) << 4)
 					/* LED1 / ~LINKSPD[1] selector */
 #define BCM5482_SHD_LEDS1_LED1(src)	((src & 0xf) << 0)
+#define BCM54XX_SHD_RGMII_MODE	0x0b	/* 01011: RGMII Mode Selector */
 #define BCM5482_SHD_SSD		0x14	/* 10100: Secondary SerDes control */
 #define BCM5482_SHD_SSD_LEDM	0x0008	/* SSD LED Mode enable */
 #define BCM5482_SHD_SSD_EN	0x0001	/* SSD enable */
 #define BCM5482_SHD_MODE	0x1f	/* 11111: Mode Control Register */
 #define BCM5482_SHD_MODE_1000BX	0x0001	/* Enable 1000BASE-X registers */
 
+
 /*
  * EXPANSION SHADOW ACCESS REGISTERS.  (PHY REG 0x15, 0x16, and 0x17)
  */
@@ -138,16 +155,6 @@
 #define BCM5482_SSD_SGMII_SLAVE_EN	0x0002	/* Slave mode enable */
 #define BCM5482_SSD_SGMII_SLAVE_AD	0x0001	/* Slave auto-detection */
 
-/*
- * Device flags for PHYs that can be configured for different operating
- * modes.
- */
-#define PHY_BCM_FLAGS_VALID		0x80000000
-#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
-#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
-#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
-#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
-
 
 /*****************************************************************************/
 /* Fast Ethernet Transceiver definitions. */
@@ -237,10 +244,43 @@
 	return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val);
 }
 
+/* Needs SMDSP clock enabled via bcm54xx_phydsp_config() */
 static int bcm50610_a0_workaround(struct phy_device *phydev)
 {
 	int err;
 
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
+				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
+				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
+					MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
+				MII_BCM54XX_EXP_EXP75_VDACCTRL);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
+				MII_BCM54XX_EXP_EXP96_MYST);
+	if (err < 0)
+		return err;
+
+	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
+				MII_BCM54XX_EXP_EXP97_MYST);
+
+	return err;
+}
+
+static int bcm54xx_phydsp_config(struct phy_device *phydev)
+{
+	int err, err2;
+
+	/* Enable the SMDSP clock */
 	err = bcm54xx_auxctl_write(phydev,
 				   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
 				   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
@@ -248,42 +288,101 @@
 	if (err < 0)
 		return err;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
-				MII_BCM54XX_EXP_EXP08_RJCT_2MHZ	|
-				MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE);
-	if (err < 0)
-		goto error;
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) {
+		/* Clear bit 9 to fix a phy interop issue. */
+		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08,
+					MII_BCM54XX_EXP_EXP08_RJCT_2MHZ);
+		if (err < 0)
+			goto error;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0,
-				MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN |
-				MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF);
-	if (err < 0)
-		goto error;
+		if (phydev->drv->phy_id == PHY_ID_BCM50610) {
+			err = bcm50610_a0_workaround(phydev);
+			if (err < 0)
+				goto error;
+		}
+	}
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3,
-					MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ);
-	if (err < 0)
-		goto error;
+	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
+		int val;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75,
-				MII_BCM54XX_EXP_EXP75_VDACCTRL);
-	if (err < 0)
-		goto error;
+		val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
+		if (val < 0)
+			goto error;
 
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96,
-				MII_BCM54XX_EXP_EXP96_MYST);
-	if (err < 0)
-		goto error;
-
-	err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97,
-				MII_BCM54XX_EXP_EXP97_MYST);
+		val |= MII_BCM54XX_EXP_EXP75_CM_OSC;
+		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val);
+	}
 
 error:
-	bcm54xx_auxctl_write(phydev,
-			     MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-			     MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
+	/* Disable the SMDSP clock */
+	err2 = bcm54xx_auxctl_write(phydev,
+				    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
+				    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
 
-	return err;
+	/* Return the first error reported. */
+	return err ? err : err2;
+}
+
+static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev)
+{
+	u32 val, orig;
+	bool clk125en = true;
+
+	/* Abort if we are using an untested phy. */
+	if (BRCM_PHY_MODEL(phydev) != PHY_ID_BCM57780 ||
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610 ||
+	    BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M)
+		return;
+
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    BRCM_PHY_REV(phydev) >= 0x3) {
+		/*
+		 * Here, bit 0 _disables_ CLK125 when set.
+		 * This bit is set by default.
+		 */
+		clk125en = false;
+	} else {
+		if (phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) {
+			/* Here, bit 0 _enables_ CLK125 when set */
+			val &= ~BCM54XX_SHD_SCR3_DEF_CLK125;
+			clk125en = false;
+		}
+	}
+
+	if (clk125en == false ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val &= ~BCM54XX_SHD_SCR3_DLLAPD_DIS;
+	else
+		val |= BCM54XX_SHD_SCR3_DLLAPD_DIS;
+
+	if (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY)
+		val |= BCM54XX_SHD_SCR3_TRDDAPD;
+
+	if (orig != val)
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val);
+
+	val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD);
+	if (val < 0)
+		return;
+
+	orig = val;
+
+	if (clk125en == false ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		val |= BCM54XX_SHD_APD_EN;
+	else
+		val &= ~BCM54XX_SHD_APD_EN;
+
+	if (orig != val)
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val);
 }
 
 static int bcm54xx_config_init(struct phy_device *phydev)
@@ -308,38 +407,17 @@
 	if (err < 0)
 		return err;
 
-	if (phydev->drv->phy_id == PHY_ID_BCM50610) {
-		err = bcm50610_a0_workaround(phydev);
-		if (err < 0)
-			return err;
-	}
+	if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 ||
+	     BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) &&
+	    (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE))
+		bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0);
 
-	if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) {
-		int err2;
+	if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) ||
+	    (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) ||
+	    (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE))
+		bcm54xx_adjust_rxrefclk(phydev);
 
-		err = bcm54xx_auxctl_write(phydev,
-					   MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-					   MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA |
-					   MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
-		if (err < 0)
-			return err;
-
-		reg = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75);
-		if (reg < 0)
-			goto error;
-
-		reg |= MII_BCM54XX_EXP_EXP75_CM_OSC;
-		err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, reg);
-
-error:
-		err2 = bcm54xx_auxctl_write(phydev,
-					    MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL,
-					    MII_BCM54XX_AUXCTL_ACTL_TX_6DB);
-		if (err)
-			return err;
-		if (err2)
-			return err2;
-	}
+	bcm54xx_phydsp_config(phydev);
 
 	return 0;
 }
@@ -564,9 +642,11 @@
 	if (err < 0)
 		goto done;
 
-	/* Enable auto power down */
-	err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
-				       MII_BRCM_FET_SHDW_AS2_APDE);
+	if (phydev->dev_flags & PHY_BRCM_AUTO_PWRDWN_ENABLE) {
+		/* Enable auto power down */
+		err = brcm_phy_setbits(phydev, MII_BRCM_FET_SHDW_AUXSTAT2,
+					       MII_BRCM_FET_SHDW_AS2_APDE);
+	}
 
 done:
 	/* Disable shadow register access */
diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c
index 6de8399..30b1b33 100644
--- a/drivers/net/ppp_async.c
+++ b/drivers/net/ppp_async.c
@@ -337,10 +337,7 @@
 	return 0;
 }
 
-/*
- * This can now be called from hard interrupt level as well
- * as soft interrupt level or mainline.
- */
+/* May sleep, don't call from interrupt level or with interrupts disabled */
 static void
 ppp_asynctty_receive(struct tty_struct *tty, const unsigned char *buf,
 		  char *cflags, int count)
diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c
index d2fa2db..c908b08 100644
--- a/drivers/net/ppp_synctty.c
+++ b/drivers/net/ppp_synctty.c
@@ -378,10 +378,7 @@
 	return 0;
 }
 
-/*
- * This can now be called from hard interrupt level as well
- * as soft interrupt level or mainline.
- */
+/* May sleep, don't call from interrupt level or with interrupts disabled */
 static void
 ppp_sync_receive(struct tty_struct *tty, const unsigned char *buf,
 		  char *cflags, int count)
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 2559991..60c8d23 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -250,20 +250,19 @@
 {
 	struct net_device *dev;
 	struct pppoe_net *pn;
-	struct pppox_sock *pppox_sock;
+	struct pppox_sock *pppox_sock = NULL;
 
 	int ifindex;
 
-	dev = dev_get_by_name(net, sp->sa_addr.pppoe.dev);
-	if (!dev)
-		return NULL;
-
-	ifindex = dev->ifindex;
-	pn = net_generic(net, pppoe_net_id);
-	pppox_sock = get_item(pn, sp->sa_addr.pppoe.sid,
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, sp->sa_addr.pppoe.dev);
+	if (dev) {
+		ifindex = dev->ifindex;
+		pn = net_generic(net, pppoe_net_id);
+		pppox_sock = get_item(pn, sp->sa_addr.pppoe.sid,
 				sp->sa_addr.pppoe.remote, ifindex);
-	dev_put(dev);
-
+	}
+	rcu_read_unlock();
 	return pppox_sock;
 }
 
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 5910df6..849cc9c 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -516,7 +516,7 @@
 		return 0;
 
 	inet = inet_sk(sk);
-	psum = csum_tcpudp_nofold(inet->saddr, inet->daddr, ulen,
+	psum = csum_tcpudp_nofold(inet->inet_saddr, inet->inet_daddr, ulen,
 				  IPPROTO_UDP, 0);
 
 	if ((skb->ip_summed == CHECKSUM_COMPLETE) &&
@@ -949,8 +949,8 @@
 	inet = inet_sk(sk_tun);
 	udp_len = hdr_len + sizeof(ppph) + total_len;
 	uh = (struct udphdr *) skb->data;
-	uh->source = inet->sport;
-	uh->dest = inet->dport;
+	uh->source = inet->inet_sport;
+	uh->dest = inet->inet_dport;
 	uh->len = htons(udp_len);
 	uh->check = 0;
 	skb_put(skb, sizeof(struct udphdr));
@@ -978,7 +978,8 @@
 	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
-		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = csum_tcpudp_magic(inet->inet_saddr,
+					      inet->inet_daddr,
 					      udp_len, IPPROTO_UDP, csum);
 		if (uh->check == 0)
 			uh->check = CSUM_MANGLED_0;
@@ -986,7 +987,8 @@
 		skb->ip_summed = CHECKSUM_PARTIAL;
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct udphdr, check);
-		uh->check = ~csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = ~csum_tcpudp_magic(inet->inet_saddr,
+					       inet->inet_daddr,
 					       udp_len, IPPROTO_UDP, 0);
 	}
 
@@ -1136,8 +1138,8 @@
 	__skb_push(skb, sizeof(*uh));
 	skb_reset_transport_header(skb);
 	uh = udp_hdr(skb);
-	uh->source = inet->sport;
-	uh->dest = inet->dport;
+	uh->source = inet->inet_sport;
+	uh->dest = inet->inet_dport;
 	uh->len = htons(udp_len);
 	uh->check = 0;
 
@@ -1181,7 +1183,8 @@
 	else if (!(skb_dst(skb)->dev->features & NETIF_F_V4_CSUM)) {
 		skb->ip_summed = CHECKSUM_COMPLETE;
 		csum = skb_checksum(skb, 0, udp_len, 0);
-		uh->check = csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = csum_tcpudp_magic(inet->inet_saddr,
+					      inet->inet_daddr,
 					      udp_len, IPPROTO_UDP, csum);
 		if (uh->check == 0)
 			uh->check = CSUM_MANGLED_0;
@@ -1189,7 +1192,8 @@
 		skb->ip_summed = CHECKSUM_PARTIAL;
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct udphdr, check);
-		uh->check = ~csum_tcpudp_magic(inet->saddr, inet->daddr,
+		uh->check = ~csum_tcpudp_magic(inet->inet_saddr,
+					       inet->inet_daddr,
 					       udp_len, IPPROTO_UDP, 0);
 	}
 
diff --git a/drivers/net/pppox.c b/drivers/net/pppox.c
index 4f6d33f..ac806b2 100644
--- a/drivers/net/pppox.c
+++ b/drivers/net/pppox.c
@@ -104,7 +104,8 @@
 
 EXPORT_SYMBOL(pppox_ioctl);
 
-static int pppox_create(struct net *net, struct socket *sock, int protocol)
+static int pppox_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	int rc = -EPROTOTYPE;
 
@@ -125,7 +126,7 @@
 	return rc;
 }
 
-static struct net_proto_family pppox_proto_family = {
+static const struct net_proto_family pppox_proto_family = {
 	.family	= PF_PPPOX,
 	.create	= pppox_create,
 	.owner	= THIS_MODULE,
diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index c2383ad..1f59f05 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -54,8 +54,10 @@
 #define RX_RING_SHADOW_SPACE	(sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_SMALL_BUFFERS) * sizeof(u64) + \
 		MAX_DB_PAGES_PER_BQ(NUM_LARGE_BUFFERS) * sizeof(u64))
-#define SMALL_BUFFER_SIZE 256
-#define LARGE_BUFFER_SIZE	PAGE_SIZE
+#define SMALL_BUFFER_SIZE 512
+#define SMALL_BUF_MAP_SIZE (SMALL_BUFFER_SIZE / 2)
+#define LARGE_BUFFER_MAX_SIZE 8192
+#define LARGE_BUFFER_MIN_SIZE 2048
 #define MAX_SPLIT_SIZE 1023
 #define QLGE_SB_PAD 32
 
@@ -795,6 +797,7 @@
 	MB_WOL_BCAST = (1 << 5),
 	MB_WOL_LINK_UP = (1 << 6),
 	MB_WOL_LINK_DOWN = (1 << 7),
+	MB_WOL_MODE_ON = (1 << 16),		/* Wake on Lan Mode on */
 	MB_CMD_SET_WOL_FLTR = 0x00000111,	/* Wake On Lan Filter */
 	MB_CMD_CLEAR_WOL_FLTR = 0x00000112, /* Wake On Lan Filter */
 	MB_CMD_SET_WOL_MAGIC = 0x00000113,	/* Wake On Lan Magic Packet */
@@ -804,12 +807,27 @@
 	MB_CMD_SET_PORT_CFG = 0x00000122,
 	MB_CMD_GET_PORT_CFG = 0x00000123,
 	MB_CMD_GET_LINK_STS = 0x00000124,
+	MB_CMD_SET_LED_CFG = 0x00000125, /* Set LED Configuration Register */
+		QL_LED_BLINK = 0x03e803e8,
+	MB_CMD_GET_LED_CFG = 0x00000126, /* Get LED Configuration Register */
 	MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
 	MB_SET_MPI_TFK_STOP = (1 << 0),
 	MB_SET_MPI_TFK_RESUME = (1 << 1),
 	MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
 	MB_GET_MPI_TFK_STOPPED = (1 << 0),
 	MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
+	/* Sub-commands for IDC request.
+	 * This describes the reason for the
+	 * IDC request.
+	 */
+	MB_CMD_IOP_NONE = 0x0000,
+	MB_CMD_IOP_PREP_UPDATE_MPI	= 0x0001,
+	MB_CMD_IOP_COMP_UPDATE_MPI	= 0x0002,
+	MB_CMD_IOP_PREP_LINK_DOWN	= 0x0010,
+	MB_CMD_IOP_DVR_START	 = 0x0100,
+	MB_CMD_IOP_FLASH_ACC	 = 0x0101,
+	MB_CMD_IOP_RESTART_MPI	= 0x0102,
+	MB_CMD_IOP_CORE_DUMP_MPI	= 0x0103,
 
 	/* Mailbox Command Status. */
 	MB_CMD_STS_GOOD = 0x00004000,	/* Success. */
@@ -1201,9 +1219,17 @@
 	struct tx_ring_desc *next;
 };
 
+struct page_chunk {
+	struct page *page;	/* master page */
+	char *va;		/* virt addr for this chunk */
+	u64 map;		/* mapping for master */
+	unsigned int offset;	/* offset for this chunk */
+	unsigned int last_flag; /* flag set for last chunk in page */
+};
+
 struct bq_desc {
 	union {
-		struct page *lbq_page;
+		struct page_chunk pg_chunk;
 		struct sk_buff *skb;
 	} p;
 	__le64 *addr;
@@ -1237,6 +1263,9 @@
 	atomic_t queue_stopped;	/* Turns queue off when full. */
 	struct delayed_work tx_work;
 	struct ql_adapter *qdev;
+	u64 tx_packets;
+	u64 tx_bytes;
+	u64 tx_errors;
 };
 
 /*
@@ -1272,6 +1301,7 @@
 	dma_addr_t lbq_base_dma;
 	void *lbq_base_indirect;
 	dma_addr_t lbq_base_indirect_dma;
+	struct page_chunk pg_chunk; /* current page for chunks */
 	struct bq_desc *lbq;	/* array of control blocks */
 	void __iomem *lbq_prod_idx_db_reg;	/* PCI doorbell mem area + 0x18 */
 	u32 lbq_prod_idx;	/* current sw prod idx */
@@ -1302,6 +1332,11 @@
 	struct napi_struct napi;
 	u8 reserved;
 	struct ql_adapter *qdev;
+	u64 rx_packets;
+	u64 rx_multicast;
+	u64 rx_bytes;
+	u64 rx_dropped;
+	u64 rx_errors;
 };
 
 /*
@@ -1363,6 +1398,174 @@
 	u64 rx_1024_to_1518_pkts;
 	u64 rx_1519_to_max_pkts;
 	u64 rx_len_err_pkts;
+	/*
+	 * These stats come from offset 500h to 5C8h
+	 * in the XGMAC register.
+	 */
+	u64 tx_cbfc_pause_frames0;
+	u64 tx_cbfc_pause_frames1;
+	u64 tx_cbfc_pause_frames2;
+	u64 tx_cbfc_pause_frames3;
+	u64 tx_cbfc_pause_frames4;
+	u64 tx_cbfc_pause_frames5;
+	u64 tx_cbfc_pause_frames6;
+	u64 tx_cbfc_pause_frames7;
+	u64 rx_cbfc_pause_frames0;
+	u64 rx_cbfc_pause_frames1;
+	u64 rx_cbfc_pause_frames2;
+	u64 rx_cbfc_pause_frames3;
+	u64 rx_cbfc_pause_frames4;
+	u64 rx_cbfc_pause_frames5;
+	u64 rx_cbfc_pause_frames6;
+	u64 rx_cbfc_pause_frames7;
+	u64 rx_nic_fifo_drop;
+};
+
+/* Address/Length pairs for the coredump. */
+enum {
+	MPI_CORE_REGS_ADDR = 0x00030000,
+	MPI_CORE_REGS_CNT = 127,
+	MPI_CORE_SH_REGS_CNT = 16,
+	TEST_REGS_ADDR = 0x00001000,
+	TEST_REGS_CNT = 23,
+	RMII_REGS_ADDR = 0x00001040,
+	RMII_REGS_CNT = 64,
+	FCMAC1_REGS_ADDR = 0x00001080,
+	FCMAC2_REGS_ADDR = 0x000010c0,
+	FCMAC_REGS_CNT = 64,
+	FC1_MBX_REGS_ADDR = 0x00001100,
+	FC2_MBX_REGS_ADDR = 0x00001240,
+	FC_MBX_REGS_CNT = 64,
+	IDE_REGS_ADDR = 0x00001140,
+	IDE_REGS_CNT = 64,
+	NIC1_MBX_REGS_ADDR = 0x00001180,
+	NIC2_MBX_REGS_ADDR = 0x00001280,
+	NIC_MBX_REGS_CNT = 64,
+	SMBUS_REGS_ADDR = 0x00001200,
+	SMBUS_REGS_CNT = 64,
+	I2C_REGS_ADDR = 0x00001fc0,
+	I2C_REGS_CNT = 64,
+	MEMC_REGS_ADDR = 0x00003000,
+	MEMC_REGS_CNT = 256,
+	PBUS_REGS_ADDR = 0x00007c00,
+	PBUS_REGS_CNT = 256,
+	MDE_REGS_ADDR = 0x00010000,
+	MDE_REGS_CNT = 6,
+	CODE_RAM_ADDR = 0x00020000,
+	CODE_RAM_CNT = 0x2000,
+	MEMC_RAM_ADDR = 0x00100000,
+	MEMC_RAM_CNT = 0x2000,
+};
+
+#define MPI_COREDUMP_COOKIE 0x5555aaaa
+struct mpi_coredump_global_header {
+	u32	cookie;
+	u8	idString[16];
+	u32	timeLo;
+	u32	timeHi;
+	u32	imageSize;
+	u32	headerSize;
+	u8	info[220];
+};
+
+struct mpi_coredump_segment_header {
+	u32	cookie;
+	u32	segNum;
+	u32	segSize;
+	u32	extra;
+	u8	description[16];
+};
+
+/* Reg dump segment numbers. */
+enum {
+	CORE_SEG_NUM = 1,
+	TEST_LOGIC_SEG_NUM = 2,
+	RMII_SEG_NUM = 3,
+	FCMAC1_SEG_NUM = 4,
+	FCMAC2_SEG_NUM = 5,
+	FC1_MBOX_SEG_NUM = 6,
+	IDE_SEG_NUM = 7,
+	NIC1_MBOX_SEG_NUM = 8,
+	SMBUS_SEG_NUM = 9,
+	FC2_MBOX_SEG_NUM = 10,
+	NIC2_MBOX_SEG_NUM = 11,
+	I2C_SEG_NUM = 12,
+	MEMC_SEG_NUM = 13,
+	PBUS_SEG_NUM = 14,
+	MDE_SEG_NUM = 15,
+	NIC1_CONTROL_SEG_NUM = 16,
+	NIC2_CONTROL_SEG_NUM = 17,
+	NIC1_XGMAC_SEG_NUM = 18,
+	NIC2_XGMAC_SEG_NUM = 19,
+	WCS_RAM_SEG_NUM = 20,
+	MEMC_RAM_SEG_NUM = 21,
+	XAUI_AN_SEG_NUM = 22,
+	XAUI_HSS_PCS_SEG_NUM = 23,
+	XFI_AN_SEG_NUM = 24,
+	XFI_TRAIN_SEG_NUM = 25,
+	XFI_HSS_PCS_SEG_NUM = 26,
+	XFI_HSS_TX_SEG_NUM = 27,
+	XFI_HSS_RX_SEG_NUM = 28,
+	XFI_HSS_PLL_SEG_NUM = 29,
+	MISC_NIC_INFO_SEG_NUM = 30,
+	INTR_STATES_SEG_NUM = 31,
+	CAM_ENTRIES_SEG_NUM = 32,
+	ROUTING_WORDS_SEG_NUM = 33,
+	ETS_SEG_NUM = 34,
+	PROBE_DUMP_SEG_NUM = 35,
+	ROUTING_INDEX_SEG_NUM = 36,
+	MAC_PROTOCOL_SEG_NUM = 37,
+	XAUI2_AN_SEG_NUM = 38,
+	XAUI2_HSS_PCS_SEG_NUM = 39,
+	XFI2_AN_SEG_NUM = 40,
+	XFI2_TRAIN_SEG_NUM = 41,
+	XFI2_HSS_PCS_SEG_NUM = 42,
+	XFI2_HSS_TX_SEG_NUM = 43,
+	XFI2_HSS_RX_SEG_NUM = 44,
+	XFI2_HSS_PLL_SEG_NUM = 45,
+	SEM_REGS_SEG_NUM = 50
+
+};
+
+struct ql_nic_misc {
+	u32 rx_ring_count;
+	u32 tx_ring_count;
+	u32 intr_count;
+	u32 function;
+};
+
+struct ql_reg_dump {
+
+	/* segment 0 */
+	struct mpi_coredump_global_header mpi_global_header;
+
+	/* segment 16 */
+	struct mpi_coredump_segment_header nic_regs_seg_hdr;
+	u32 nic_regs[64];
+
+	/* segment 30 */
+	struct mpi_coredump_segment_header misc_nic_seg_hdr;
+	struct ql_nic_misc misc_nic_info;
+
+	/* segment 31 */
+	/* one interrupt state for each CQ */
+	struct mpi_coredump_segment_header intr_states_seg_hdr;
+	u32 intr_states[MAX_CPUS];
+
+	/* segment 32 */
+	/* 3 cam words each for 16 unicast,
+	 * 2 cam words for each of 32 multicast.
+	 */
+	struct mpi_coredump_segment_header cam_entries_seg_hdr;
+	u32 cam_entries[(16 * 3) + (32 * 3)];
+
+	/* segment 33 */
+	struct mpi_coredump_segment_header nic_routing_words_seg_hdr;
+	u32 nic_routing_words[16];
+
+	/* segment 34 */
+	struct mpi_coredump_segment_header ets_seg_hdr;
+	u32 ets[8+2];
 };
 
 /*
@@ -1398,6 +1601,8 @@
 	QL_ALLMULTI = 6,
 	QL_PORT_CFG = 7,
 	QL_CAM_RT_SET = 8,
+	QL_SELFTEST = 9,
+	QL_LB_LINK_UP = 10,
 };
 
 /* link_status bit definitions */
@@ -1505,6 +1710,7 @@
 
 	struct rx_ring rx_ring[MAX_RX_RINGS];
 	struct tx_ring tx_ring[MAX_TX_RINGS];
+	unsigned int lbq_buf_order;
 
 	int rx_csum;
 	u32 default_rx_queue;
@@ -1519,11 +1725,11 @@
 	u32 port_init;
 	u32 link_status;
 	u32 link_config;
+	u32 led_config;
 	u32 max_frame_size;
 
 	union flash_params flash;
 
-	struct net_device_stats stats;
 	struct workqueue_struct *workqueue;
 	struct delayed_work asic_reset_work;
 	struct delayed_work mpi_reset_work;
@@ -1533,6 +1739,7 @@
 	struct completion ide_completion;
 	struct nic_operations *nic_ops;
 	u16 device_id;
+	atomic_t lb_count;
 };
 
 /*
@@ -1611,10 +1818,22 @@
 int ql_cam_route_initialize(struct ql_adapter *qdev);
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
+int ql_wol(struct ql_adapter *qdev);
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol);
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol);
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config);
+int ql_mb_get_led_cfg(struct ql_adapter *qdev);
 void ql_link_on(struct ql_adapter *qdev);
 void ql_link_off(struct ql_adapter *qdev);
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_mb_get_port_cfg(struct ql_adapter *qdev);
+int ql_mb_set_port_cfg(struct ql_adapter *qdev);
 int ql_wait_fifo_empty(struct ql_adapter *qdev);
+void ql_gen_reg_dump(struct ql_adapter *qdev,
+			struct ql_reg_dump *mpi_coredump);
+netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev);
+void ql_check_lb_frame(struct ql_adapter *, struct sk_buff *);
+int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_dbg.c b/drivers/net/qlge/qlge_dbg.c
index aa88cb3..9f58c47 100644
--- a/drivers/net/qlge/qlge_dbg.c
+++ b/drivers/net/qlge/qlge_dbg.c
@@ -1,5 +1,185 @@
 #include "qlge.h"
 
+
+static int ql_get_ets_regs(struct ql_adapter *qdev, u32 * buf)
+{
+	int status = 0;
+	int i;
+
+	for (i = 0; i < 8; i++, buf++) {
+		ql_write32(qdev, NIC_ETS, i << 29 | 0x08000000);
+		*buf = ql_read32(qdev, NIC_ETS);
+	}
+
+	for (i = 0; i < 2; i++, buf++) {
+		ql_write32(qdev, CNA_ETS, i << 29 | 0x08000000);
+		*buf = ql_read32(qdev, CNA_ETS);
+	}
+
+	return status;
+}
+
+static void ql_get_intr_states(struct ql_adapter *qdev, u32 * buf)
+{
+	int i;
+
+	for (i = 0; i < qdev->rx_ring_count; i++, buf++) {
+		ql_write32(qdev, INTR_EN,
+				qdev->intr_context[i].intr_read_mask);
+		*buf = ql_read32(qdev, INTR_EN);
+	}
+}
+
+static int ql_get_cam_entries(struct ql_adapter *qdev, u32 * buf)
+{
+	int i, status;
+	u32 value[3];
+
+	status = ql_sem_spinlock(qdev, SEM_MAC_ADDR_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = ql_get_mac_addr_reg(qdev,
+					MAC_ADDR_TYPE_CAM_MAC, i, value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of mac index register.\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower MAC address */
+		*buf++ = value[1];	/* upper MAC address */
+		*buf++ = value[2];	/* output */
+	}
+	for (i = 0; i < 32; i++) {
+		status = ql_get_mac_addr_reg(qdev,
+					MAC_ADDR_TYPE_MULTI_MAC, i, value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of mac index register.\n");
+			goto err;
+		}
+		*buf++ = value[0];	/* lower Mcast address */
+		*buf++ = value[1];	/* upper Mcast address */
+	}
+err:
+	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
+	return status;
+}
+
+static int ql_get_routing_entries(struct ql_adapter *qdev, u32 * buf)
+{
+	int status;
+	u32 value, i;
+
+	status = ql_sem_spinlock(qdev, SEM_RT_IDX_MASK);
+	if (status)
+		return status;
+
+	for (i = 0; i < 16; i++) {
+		status = ql_get_routing_reg(qdev, i, &value);
+		if (status) {
+			QPRINTK(qdev, DRV, ERR,
+				"Failed read of routing index register.\n");
+			goto err;
+		} else {
+			*buf++ = value;
+		}
+	}
+err:
+	ql_sem_unlock(qdev, SEM_RT_IDX_MASK);
+	return status;
+}
+
+/* Create a coredump segment header */
+static void ql_build_coredump_seg_header(
+		struct mpi_coredump_segment_header *seg_hdr,
+		u32 seg_number, u32 seg_size, u8 *desc)
+{
+	memset(seg_hdr, 0, sizeof(struct mpi_coredump_segment_header));
+	seg_hdr->cookie = MPI_COREDUMP_COOKIE;
+	seg_hdr->segNum = seg_number;
+	seg_hdr->segSize = seg_size;
+	memcpy(seg_hdr->description, desc, (sizeof(seg_hdr->description)) - 1);
+}
+
+void ql_gen_reg_dump(struct ql_adapter *qdev,
+			struct ql_reg_dump *mpi_coredump)
+{
+	int i, status;
+
+
+	memset(&(mpi_coredump->mpi_global_header), 0,
+		sizeof(struct mpi_coredump_global_header));
+	mpi_coredump->mpi_global_header.cookie = MPI_COREDUMP_COOKIE;
+	mpi_coredump->mpi_global_header.headerSize =
+		sizeof(struct mpi_coredump_global_header);
+	mpi_coredump->mpi_global_header.imageSize =
+		sizeof(struct ql_reg_dump);
+	memcpy(mpi_coredump->mpi_global_header.idString, "MPI Coredump",
+		sizeof(mpi_coredump->mpi_global_header.idString));
+
+
+	/* segment 16 */
+	ql_build_coredump_seg_header(&mpi_coredump->misc_nic_seg_hdr,
+				MISC_NIC_INFO_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->misc_nic_info),
+				"MISC NIC INFO");
+	mpi_coredump->misc_nic_info.rx_ring_count = qdev->rx_ring_count;
+	mpi_coredump->misc_nic_info.tx_ring_count = qdev->tx_ring_count;
+	mpi_coredump->misc_nic_info.intr_count = qdev->intr_count;
+	mpi_coredump->misc_nic_info.function = qdev->func;
+
+	/* Segment 16, Rev C. Step 18 */
+	ql_build_coredump_seg_header(&mpi_coredump->nic_regs_seg_hdr,
+				NIC1_CONTROL_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic_regs),
+				"NIC Registers");
+	/* Get generic reg dump */
+	for (i = 0; i < 64; i++)
+		mpi_coredump->nic_regs[i] = ql_read32(qdev, i * sizeof(u32));
+
+	/* Segment 31 */
+	/* Get indexed register values. */
+	ql_build_coredump_seg_header(&mpi_coredump->intr_states_seg_hdr,
+				INTR_STATES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->intr_states),
+				"INTR States");
+	ql_get_intr_states(qdev, &mpi_coredump->intr_states[0]);
+
+	ql_build_coredump_seg_header(&mpi_coredump->cam_entries_seg_hdr,
+				CAM_ENTRIES_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->cam_entries),
+				"CAM Entries");
+	status = ql_get_cam_entries(qdev, &mpi_coredump->cam_entries[0]);
+	if (status)
+		return;
+
+	ql_build_coredump_seg_header(&mpi_coredump->nic_routing_words_seg_hdr,
+				ROUTING_WORDS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->nic_routing_words),
+				"Routing Words");
+	status = ql_get_routing_entries(qdev,
+			 &mpi_coredump->nic_routing_words[0]);
+	if (status)
+		return;
+
+	/* Segment 34 (Rev C. step 23) */
+	ql_build_coredump_seg_header(&mpi_coredump->ets_seg_hdr,
+				ETS_SEG_NUM,
+				sizeof(struct mpi_coredump_segment_header)
+				+ sizeof(mpi_coredump->ets),
+				"ETS Registers");
+	status = ql_get_ets_regs(qdev, &mpi_coredump->ets[0]);
+	if (status)
+		return;
+}
+
 #ifdef QL_REG_DUMP
 static void ql_dump_intr_states(struct ql_adapter *qdev)
 {
diff --git a/drivers/net/qlge/qlge_ethtool.c b/drivers/net/qlge/qlge_ethtool.c
index 5207394..058fa0a 100644
--- a/drivers/net/qlge/qlge_ethtool.c
+++ b/drivers/net/qlge/qlge_ethtool.c
@@ -36,6 +36,11 @@
 
 #include "qlge.h"
 
+static const char ql_gstrings_test[][ETH_GSTRING_LEN] = {
+	"Loopback test  (offline)"
+};
+#define QLGE_TEST_LEN (sizeof(ql_gstrings_test) / ETH_GSTRING_LEN)
+
 static int ql_update_ring_coalescing(struct ql_adapter *qdev)
 {
 	int i, status = 0;
@@ -132,6 +137,41 @@
 		iter++;
 	}
 
+	/*
+	 * Get Per-priority TX pause frame counter statistics.
+	 */
+	for (i = 0x500; i < 0x540; i += 8) {
+		if (ql_read_xgmac_reg64(qdev, i, &data)) {
+			QPRINTK(qdev, DRV, ERR,
+				"Error reading status register 0x%.04x.\n", i);
+			goto end;
+		} else
+			*iter = data;
+		iter++;
+	}
+
+	/*
+	 * Get Per-priority RX pause frame counter statistics.
+	 */
+	for (i = 0x568; i < 0x5a8; i += 8) {
+		if (ql_read_xgmac_reg64(qdev, i, &data)) {
+			QPRINTK(qdev, DRV, ERR,
+				"Error reading status register 0x%.04x.\n", i);
+			goto end;
+		} else
+			*iter = data;
+		iter++;
+	}
+
+	/*
+	 * Get RX NIC FIFO DROP statistics.
+	 */
+	if (ql_read_xgmac_reg64(qdev, 0x5b8, &data)) {
+		QPRINTK(qdev, DRV, ERR,
+			"Error reading status register 0x%.04x.\n", i);
+		goto end;
+	} else
+		*iter = data;
 end:
 	ql_sem_unlock(qdev, qdev->xg_sem_mask);
 quit:
@@ -185,6 +225,23 @@
 	{"rx_1024_to_1518_pkts"},
 	{"rx_1519_to_max_pkts"},
 	{"rx_len_err_pkts"},
+	{"tx_cbfc_pause_frames0"},
+	{"tx_cbfc_pause_frames1"},
+	{"tx_cbfc_pause_frames2"},
+	{"tx_cbfc_pause_frames3"},
+	{"tx_cbfc_pause_frames4"},
+	{"tx_cbfc_pause_frames5"},
+	{"tx_cbfc_pause_frames6"},
+	{"tx_cbfc_pause_frames7"},
+	{"rx_cbfc_pause_frames0"},
+	{"rx_cbfc_pause_frames1"},
+	{"rx_cbfc_pause_frames2"},
+	{"rx_cbfc_pause_frames3"},
+	{"rx_cbfc_pause_frames4"},
+	{"rx_cbfc_pause_frames5"},
+	{"rx_cbfc_pause_frames6"},
+	{"rx_cbfc_pause_frames7"},
+	{"rx_nic_fifo_drop"},
 };
 
 static void ql_get_strings(struct net_device *dev, u32 stringset, u8 *buf)
@@ -199,6 +256,8 @@
 static int ql_get_sset_count(struct net_device *dev, int sset)
 {
 	switch (sset) {
+	case ETH_SS_TEST:
+		return QLGE_TEST_LEN;
 	case ETH_SS_STATS:
 		return ARRAY_SIZE(ql_stats_str_arr);
 	default:
@@ -257,6 +316,23 @@
 	*data++ = s->rx_1024_to_1518_pkts;
 	*data++ = s->rx_1519_to_max_pkts;
 	*data++ = s->rx_len_err_pkts;
+	*data++ = s->tx_cbfc_pause_frames0;
+	*data++ = s->tx_cbfc_pause_frames1;
+	*data++ = s->tx_cbfc_pause_frames2;
+	*data++ = s->tx_cbfc_pause_frames3;
+	*data++ = s->tx_cbfc_pause_frames4;
+	*data++ = s->tx_cbfc_pause_frames5;
+	*data++ = s->tx_cbfc_pause_frames6;
+	*data++ = s->tx_cbfc_pause_frames7;
+	*data++ = s->rx_cbfc_pause_frames0;
+	*data++ = s->rx_cbfc_pause_frames1;
+	*data++ = s->rx_cbfc_pause_frames2;
+	*data++ = s->rx_cbfc_pause_frames3;
+	*data++ = s->rx_cbfc_pause_frames4;
+	*data++ = s->rx_cbfc_pause_frames5;
+	*data++ = s->rx_cbfc_pause_frames6;
+	*data++ = s->rx_cbfc_pause_frames7;
+	*data++ = s->rx_nic_fifo_drop;
 }
 
 static int ql_get_settings(struct net_device *ndev,
@@ -302,6 +378,181 @@
 	drvinfo->eedump_len = 0;
 }
 
+static void ql_get_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	/* What we support. */
+	wol->supported = WAKE_MAGIC;
+	/* What we've currently got set. */
+	wol->wolopts = qdev->wol;
+}
+
+static int ql_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	int status;
+
+	if (wol->wolopts & ~WAKE_MAGIC)
+		return -EINVAL;
+	qdev->wol = wol->wolopts;
+
+	QPRINTK(qdev, DRV, INFO, "Set wol option 0x%x on %s\n",
+			 qdev->wol, ndev->name);
+	if (!qdev->wol) {
+		u32 wol = 0;
+		status = ql_mb_wol_mode(qdev, wol);
+		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
+			(status == 0) ? "cleared sucessfully" : "clear failed",
+			wol, qdev->ndev->name);
+	}
+
+	return 0;
+}
+
+static int ql_phys_id(struct net_device *ndev, u32 data)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+	u32 led_reg, i;
+	int status;
+
+	/* Save the current LED settings */
+	status = ql_mb_get_led_cfg(qdev);
+	if (status)
+		return status;
+	led_reg = qdev->led_config;
+
+	/* Start blinking the led */
+	if (!data || data > 300)
+		data = 300;
+
+	for (i = 0; i < (data * 10); i++)
+		ql_mb_set_led_cfg(qdev, QL_LED_BLINK);
+
+	/* Restore LED settings */
+	status = ql_mb_set_led_cfg(qdev, led_reg);
+	if (status)
+		return status;
+
+	return 0;
+}
+
+static int ql_start_loopback(struct ql_adapter *qdev)
+{
+	if (netif_carrier_ok(qdev->ndev)) {
+		set_bit(QL_LB_LINK_UP, &qdev->flags);
+		netif_carrier_off(qdev->ndev);
+	} else
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	qdev->link_config |= CFG_LOOPBACK_PCS;
+	return ql_mb_set_port_cfg(qdev);
+}
+
+static void ql_stop_loopback(struct ql_adapter *qdev)
+{
+	qdev->link_config &= ~CFG_LOOPBACK_PCS;
+	ql_mb_set_port_cfg(qdev);
+	if (test_bit(QL_LB_LINK_UP, &qdev->flags)) {
+		netif_carrier_on(qdev->ndev);
+		clear_bit(QL_LB_LINK_UP, &qdev->flags);
+	}
+}
+
+static void ql_create_lb_frame(struct sk_buff *skb,
+					unsigned int frame_size)
+{
+	memset(skb->data, 0xFF, frame_size);
+	frame_size &= ~1;
+	memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1);
+	memset(&skb->data[frame_size / 2 + 10], 0xBE, 1);
+	memset(&skb->data[frame_size / 2 + 12], 0xAF, 1);
+}
+
+void ql_check_lb_frame(struct ql_adapter *qdev,
+					struct sk_buff *skb)
+{
+	unsigned int frame_size = skb->len;
+
+	if ((*(skb->data + 3) == 0xFF) &&
+		(*(skb->data + frame_size / 2 + 10) == 0xBE) &&
+		(*(skb->data + frame_size / 2 + 12) == 0xAF)) {
+			atomic_dec(&qdev->lb_count);
+			return;
+	}
+}
+
+static int ql_run_loopback_test(struct ql_adapter *qdev)
+{
+	int i;
+	netdev_tx_t rc;
+	struct sk_buff *skb;
+	unsigned int size = SMALL_BUF_MAP_SIZE;
+
+	for (i = 0; i < 64; i++) {
+		skb = netdev_alloc_skb(qdev->ndev, size);
+		if (!skb)
+			return -ENOMEM;
+
+		skb->queue_mapping = 0;
+		skb_put(skb, size);
+		ql_create_lb_frame(skb, size);
+		rc = ql_lb_send(skb, qdev->ndev);
+		if (rc != NETDEV_TX_OK)
+			return -EPIPE;
+		atomic_inc(&qdev->lb_count);
+	}
+
+	ql_clean_lb_rx_ring(&qdev->rx_ring[0], 128);
+	return atomic_read(&qdev->lb_count) ? -EIO : 0;
+}
+
+static int ql_loopback_test(struct ql_adapter *qdev, u64 *data)
+{
+	*data = ql_start_loopback(qdev);
+	if (*data)
+		goto out;
+	*data = ql_run_loopback_test(qdev);
+out:
+	ql_stop_loopback(qdev);
+	return *data;
+}
+
+static void ql_self_test(struct net_device *ndev,
+				struct ethtool_test *eth_test, u64 *data)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+
+	if (netif_running(ndev)) {
+		set_bit(QL_SELFTEST, &qdev->flags);
+		if (eth_test->flags == ETH_TEST_FL_OFFLINE) {
+			/* Offline tests */
+			if (ql_loopback_test(qdev, &data[0]))
+				eth_test->flags |= ETH_TEST_FL_FAILED;
+
+		} else {
+			/* Online tests */
+			data[0] = 0;
+		}
+		clear_bit(QL_SELFTEST, &qdev->flags);
+	} else {
+		QPRINTK(qdev, DRV, ERR,
+			"%s: is down, Loopback test will fail.\n", ndev->name);
+		eth_test->flags |= ETH_TEST_FL_FAILED;
+	}
+}
+
+static int ql_get_regs_len(struct net_device *ndev)
+{
+	return sizeof(struct ql_reg_dump);
+}
+
+static void ql_get_regs(struct net_device *ndev,
+			struct ethtool_regs *regs, void *p)
+{
+	struct ql_adapter *qdev = netdev_priv(ndev);
+
+	ql_gen_reg_dump(qdev, p);
+}
+
 static int ql_get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
 {
 	struct ql_adapter *qdev = netdev_priv(dev);
@@ -355,6 +606,37 @@
 	return ql_update_ring_coalescing(qdev);
 }
 
+static void ql_get_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+
+	ql_mb_get_port_cfg(qdev);
+	if (qdev->link_config & CFG_PAUSE_STD) {
+		pause->rx_pause = 1;
+		pause->tx_pause = 1;
+	}
+}
+
+static int ql_set_pauseparam(struct net_device *netdev,
+			struct ethtool_pauseparam *pause)
+{
+	struct ql_adapter *qdev = netdev_priv(netdev);
+	int status = 0;
+
+	if ((pause->rx_pause) && (pause->tx_pause))
+		qdev->link_config |= CFG_PAUSE_STD;
+	else if (!pause->rx_pause && !pause->tx_pause)
+		qdev->link_config &= ~CFG_PAUSE_STD;
+	else
+		return -EINVAL;
+
+	status = ql_mb_set_port_cfg(qdev);
+	if (status)
+		return status;
+	return status;
+}
+
 static u32 ql_get_rx_csum(struct net_device *netdev)
 {
 	struct ql_adapter *qdev = netdev_priv(netdev);
@@ -396,9 +678,17 @@
 const struct ethtool_ops qlge_ethtool_ops = {
 	.get_settings = ql_get_settings,
 	.get_drvinfo = ql_get_drvinfo,
+	.get_wol = ql_get_wol,
+	.set_wol = ql_set_wol,
+	.get_regs_len	= ql_get_regs_len,
+	.get_regs = ql_get_regs,
 	.get_msglevel = ql_get_msglevel,
 	.set_msglevel = ql_set_msglevel,
 	.get_link = ethtool_op_get_link,
+	.phys_id		 = ql_phys_id,
+	.self_test		 = ql_self_test,
+	.get_pauseparam		 = ql_get_pauseparam,
+	.set_pauseparam		 = ql_set_pauseparam,
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index cea7531..0de596a 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -1025,6 +1025,11 @@
 	return status;
 }
 
+static inline unsigned int ql_lbq_block_size(struct ql_adapter *qdev)
+{
+	return PAGE_SIZE << qdev->lbq_buf_order;
+}
+
 /* Get the next large buffer. */
 static struct bq_desc *ql_get_curr_lbuf(struct rx_ring *rx_ring)
 {
@@ -1036,6 +1041,28 @@
 	return lbq_desc;
 }
 
+static struct bq_desc *ql_get_curr_lchunk(struct ql_adapter *qdev,
+		struct rx_ring *rx_ring)
+{
+	struct bq_desc *lbq_desc = ql_get_curr_lbuf(rx_ring);
+
+	pci_dma_sync_single_for_cpu(qdev->pdev,
+					pci_unmap_addr(lbq_desc, mapaddr),
+				    rx_ring->lbq_buf_size,
+					PCI_DMA_FROMDEVICE);
+
+	/* If it's the last chunk of our master page then
+	 * we unmap it.
+	 */
+	if ((lbq_desc->p.pg_chunk.offset + rx_ring->lbq_buf_size)
+					== ql_lbq_block_size(qdev))
+		pci_unmap_page(qdev->pdev,
+				lbq_desc->p.pg_chunk.map,
+				ql_lbq_block_size(qdev),
+				PCI_DMA_FROMDEVICE);
+	return lbq_desc;
+}
+
 /* Get the next small buffer. */
 static struct bq_desc *ql_get_curr_sbuf(struct rx_ring *rx_ring)
 {
@@ -1063,6 +1090,53 @@
 	ql_write_db_reg(rx_ring->cnsmr_idx, rx_ring->cnsmr_idx_db_reg);
 }
 
+static int ql_get_next_chunk(struct ql_adapter *qdev, struct rx_ring *rx_ring,
+						struct bq_desc *lbq_desc)
+{
+	if (!rx_ring->pg_chunk.page) {
+		u64 map;
+		rx_ring->pg_chunk.page = alloc_pages(__GFP_COLD | __GFP_COMP |
+						GFP_ATOMIC,
+						qdev->lbq_buf_order);
+		if (unlikely(!rx_ring->pg_chunk.page)) {
+			QPRINTK(qdev, DRV, ERR,
+				"page allocation failed.\n");
+			return -ENOMEM;
+		}
+		rx_ring->pg_chunk.offset = 0;
+		map = pci_map_page(qdev->pdev, rx_ring->pg_chunk.page,
+					0, ql_lbq_block_size(qdev),
+					PCI_DMA_FROMDEVICE);
+		if (pci_dma_mapping_error(qdev->pdev, map)) {
+			__free_pages(rx_ring->pg_chunk.page,
+					qdev->lbq_buf_order);
+			QPRINTK(qdev, DRV, ERR,
+				"PCI mapping failed.\n");
+			return -ENOMEM;
+		}
+		rx_ring->pg_chunk.map = map;
+		rx_ring->pg_chunk.va = page_address(rx_ring->pg_chunk.page);
+	}
+
+	/* Copy the current master pg_chunk info
+	 * to the current descriptor.
+	 */
+	lbq_desc->p.pg_chunk = rx_ring->pg_chunk;
+
+	/* Adjust the master page chunk for next
+	 * buffer get.
+	 */
+	rx_ring->pg_chunk.offset += rx_ring->lbq_buf_size;
+	if (rx_ring->pg_chunk.offset == ql_lbq_block_size(qdev)) {
+		rx_ring->pg_chunk.page = NULL;
+		lbq_desc->p.pg_chunk.last_flag = 1;
+	} else {
+		rx_ring->pg_chunk.va += rx_ring->lbq_buf_size;
+		get_page(rx_ring->pg_chunk.page);
+		lbq_desc->p.pg_chunk.last_flag = 0;
+	}
+	return 0;
+}
 /* Process (refill) a large buffer queue. */
 static void ql_update_lbq(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
@@ -1072,39 +1146,28 @@
 	u64 map;
 	int i;
 
-	while (rx_ring->lbq_free_cnt > 16) {
+	while (rx_ring->lbq_free_cnt > 32) {
 		for (i = 0; i < 16; i++) {
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"lbq: try cleaning clean_idx = %d.\n",
 				clean_idx);
 			lbq_desc = &rx_ring->lbq[clean_idx];
-			if (lbq_desc->p.lbq_page == NULL) {
-				QPRINTK(qdev, RX_STATUS, DEBUG,
-					"lbq: getting new page for index %d.\n",
-					lbq_desc->index);
-				lbq_desc->p.lbq_page = alloc_page(GFP_ATOMIC);
-				if (lbq_desc->p.lbq_page == NULL) {
-					rx_ring->lbq_clean_idx = clean_idx;
-					QPRINTK(qdev, RX_STATUS, ERR,
-						"Couldn't get a page.\n");
+			if (ql_get_next_chunk(qdev, rx_ring, lbq_desc)) {
+				QPRINTK(qdev, IFUP, ERR,
+					"Could not get a page chunk.\n");
 					return;
 				}
-				map = pci_map_page(qdev->pdev,
-						   lbq_desc->p.lbq_page,
-						   0, PAGE_SIZE,
-						   PCI_DMA_FROMDEVICE);
-				if (pci_dma_mapping_error(qdev->pdev, map)) {
-					rx_ring->lbq_clean_idx = clean_idx;
-					put_page(lbq_desc->p.lbq_page);
-					lbq_desc->p.lbq_page = NULL;
-					QPRINTK(qdev, RX_STATUS, ERR,
-						"PCI mapping failed.\n");
-					return;
-				}
+
+			map = lbq_desc->p.pg_chunk.map +
+				lbq_desc->p.pg_chunk.offset;
 				pci_unmap_addr_set(lbq_desc, mapaddr, map);
-				pci_unmap_len_set(lbq_desc, maplen, PAGE_SIZE);
+			pci_unmap_len_set(lbq_desc, maplen,
+					rx_ring->lbq_buf_size);
 				*lbq_desc->addr = cpu_to_le64(map);
-			}
+
+			pci_dma_sync_single_for_device(qdev->pdev, map,
+						rx_ring->lbq_buf_size,
+						PCI_DMA_FROMDEVICE);
 			clean_idx++;
 			if (clean_idx == rx_ring->lbq_len)
 				clean_idx = 0;
@@ -1147,7 +1210,7 @@
 					sbq_desc->index);
 				sbq_desc->p.skb =
 				    netdev_alloc_skb(qdev->ndev,
-						     rx_ring->sbq_buf_size);
+						     SMALL_BUFFER_SIZE);
 				if (sbq_desc->p.skb == NULL) {
 					QPRINTK(qdev, PROBE, ERR,
 						"Couldn't get an skb.\n");
@@ -1157,8 +1220,8 @@
 				skb_reserve(sbq_desc->p.skb, QLGE_SB_PAD);
 				map = pci_map_single(qdev->pdev,
 						     sbq_desc->p.skb->data,
-						     rx_ring->sbq_buf_size /
-						     2, PCI_DMA_FROMDEVICE);
+						     rx_ring->sbq_buf_size,
+						     PCI_DMA_FROMDEVICE);
 				if (pci_dma_mapping_error(qdev->pdev, map)) {
 					QPRINTK(qdev, IFUP, ERR, "PCI mapping failed.\n");
 					rx_ring->sbq_clean_idx = clean_idx;
@@ -1168,7 +1231,7 @@
 				}
 				pci_unmap_addr_set(sbq_desc, mapaddr, map);
 				pci_unmap_len_set(sbq_desc, maplen,
-						  rx_ring->sbq_buf_size / 2);
+						  rx_ring->sbq_buf_size);
 				*sbq_desc->addr = cpu_to_le64(map);
 			}
 
@@ -1480,27 +1543,24 @@
 			 * chain it to the header buffer's skb and let
 			 * it rip.
 			 */
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc,
-						      mapaddr),
-				       pci_unmap_len(lbq_desc, maplen),
-				       PCI_DMA_FROMDEVICE);
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Chaining page to skb.\n");
-			skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
-					   0, length);
+				"Chaining page at offset = %d,"
+				"for %d bytes  to skb.\n",
+				lbq_desc->p.pg_chunk.offset, length);
+			skb_fill_page_desc(skb, 0, lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						length);
 			skb->len += length;
 			skb->data_len += length;
 			skb->truesize += length;
-			lbq_desc->p.lbq_page = NULL;
 		} else {
 			/*
 			 * The headers and data are in a single large buffer. We
 			 * copy it to a new skb and let it go. This can happen with
 			 * jumbo mtu on a non-TCP/UDP frame.
 			 */
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
 			skb = netdev_alloc_skb(qdev->ndev, length);
 			if (skb == NULL) {
 				QPRINTK(qdev, PROBE, DEBUG,
@@ -1515,13 +1575,14 @@
 			skb_reserve(skb, NET_IP_ALIGN);
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"%d bytes of headers and data in large. Chain page to new skb and pull tail.\n", length);
-			skb_fill_page_desc(skb, 0, lbq_desc->p.lbq_page,
-					   0, length);
+			skb_fill_page_desc(skb, 0,
+						lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						length);
 			skb->len += length;
 			skb->data_len += length;
 			skb->truesize += length;
 			length -= length;
-			lbq_desc->p.lbq_page = NULL;
 			__pskb_pull_tail(skb,
 				(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
 				VLAN_ETH_HLEN : ETH_HLEN);
@@ -1538,8 +1599,7 @@
 		 *         frames.  If the MTU goes up we could
 		 *          eventually be in trouble.
 		 */
-		int size, offset, i = 0;
-		__le64 *bq, bq_array[8];
+		int size, i = 0;
 		sbq_desc = ql_get_curr_sbuf(rx_ring);
 		pci_unmap_single(qdev->pdev,
 				 pci_unmap_addr(sbq_desc, mapaddr),
@@ -1558,37 +1618,25 @@
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"%d bytes of headers & data in chain of large.\n", length);
 			skb = sbq_desc->p.skb;
-			bq = &bq_array[0];
-			memcpy(bq, skb->data, sizeof(bq_array));
 			sbq_desc->p.skb = NULL;
 			skb_reserve(skb, NET_IP_ALIGN);
-		} else {
-			QPRINTK(qdev, RX_STATUS, DEBUG,
-				"Headers in small, %d bytes of data in chain of large.\n", length);
-			bq = (__le64 *)sbq_desc->p.skb->data;
 		}
 		while (length > 0) {
-			lbq_desc = ql_get_curr_lbuf(rx_ring);
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc,
-						      mapaddr),
-				       pci_unmap_len(lbq_desc,
-						     maplen),
-				       PCI_DMA_FROMDEVICE);
-			size = (length < PAGE_SIZE) ? length : PAGE_SIZE;
-			offset = 0;
+			lbq_desc = ql_get_curr_lchunk(qdev, rx_ring);
+			size = (length < rx_ring->lbq_buf_size) ? length :
+				rx_ring->lbq_buf_size;
 
 			QPRINTK(qdev, RX_STATUS, DEBUG,
 				"Adding page %d to skb for %d bytes.\n",
 				i, size);
-			skb_fill_page_desc(skb, i, lbq_desc->p.lbq_page,
-					   offset, size);
+			skb_fill_page_desc(skb, i,
+						lbq_desc->p.pg_chunk.page,
+						lbq_desc->p.pg_chunk.offset,
+						size);
 			skb->len += size;
 			skb->data_len += size;
 			skb->truesize += size;
 			length -= size;
-			lbq_desc->p.lbq_page = NULL;
-			bq++;
 			i++;
 		}
 		__pskb_pull_tail(skb, (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_V) ?
@@ -1613,6 +1661,7 @@
 	if (unlikely(!skb)) {
 		QPRINTK(qdev, RX_STATUS, DEBUG,
 			"No skb available, drop packet.\n");
+		rx_ring->rx_dropped++;
 		return;
 	}
 
@@ -1621,6 +1670,7 @@
 		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
 					ib_mac_rsp->flags2);
 		dev_kfree_skb_any(skb);
+		rx_ring->rx_errors++;
 		return;
 	}
 
@@ -1629,6 +1679,14 @@
 	 */
 	if (skb->len > ndev->mtu + ETH_HLEN) {
 		dev_kfree_skb_any(skb);
+		rx_ring->rx_dropped++;
+		return;
+	}
+
+	/* loopback self test for ethtool */
+	if (test_bit(QL_SELFTEST, &qdev->flags)) {
+		ql_check_lb_frame(qdev, skb);
+		dev_kfree_skb_any(skb);
 		return;
 	}
 
@@ -1642,6 +1700,7 @@
 			IB_MAC_IOCB_RSP_M_REG ? "Registered" : "",
 			(ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) ==
 			IB_MAC_IOCB_RSP_M_PROM ? "Promiscuous" : "");
+		rx_ring->rx_multicast++;
 	}
 	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_P) {
 		QPRINTK(qdev, RX_STATUS, DEBUG, "Promiscuous Packet.\n");
@@ -1673,8 +1732,8 @@
 		}
 	}
 
-	qdev->stats.rx_packets++;
-	qdev->stats.rx_bytes += skb->len;
+	rx_ring->rx_packets++;
+	rx_ring->rx_bytes += skb->len;
 	skb_record_rx_queue(skb, rx_ring->cq_id);
 	if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
 		if (qdev->vlgrp &&
@@ -1705,8 +1764,8 @@
 	tx_ring = &qdev->tx_ring[mac_rsp->txq_idx];
 	tx_ring_desc = &tx_ring->q[mac_rsp->tid];
 	ql_unmap_send(qdev, tx_ring_desc, tx_ring_desc->map_cnt);
-	qdev->stats.tx_bytes += (tx_ring_desc->skb)->len;
-	qdev->stats.tx_packets++;
+	tx_ring->tx_bytes += (tx_ring_desc->skb)->len;
+	tx_ring->tx_packets++;
 	dev_kfree_skb(tx_ring_desc->skb);
 	tx_ring_desc->skb = NULL;
 
@@ -1929,7 +1988,7 @@
 	return work_done;
 }
 
-static void ql_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
+static void qlge_vlan_rx_register(struct net_device *ndev, struct vlan_group *grp)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 
@@ -1945,7 +2004,7 @@
 	}
 }
 
-static void ql_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
+static void qlge_vlan_rx_add_vid(struct net_device *ndev, u16 vid)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	u32 enable_bit = MAC_ADDR_E;
@@ -1961,7 +2020,7 @@
 	ql_sem_unlock(qdev, SEM_MAC_ADDR_MASK);
 }
 
-static void ql_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
+static void qlge_vlan_rx_kill_vid(struct net_device *ndev, u16 vid)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	u32 enable_bit = 0;
@@ -2046,12 +2105,12 @@
 	 */
 	var = ql_read32(qdev, ISR1);
 	if (var & intr_context->irq_mask) {
-				QPRINTK(qdev, INTR, INFO,
+		QPRINTK(qdev, INTR, INFO,
 			"Waking handler for rx_ring[0].\n");
 		ql_disable_completion_interrupt(qdev, intr_context->intr);
-					napi_schedule(&rx_ring->napi);
-				work_done++;
-			}
+		napi_schedule(&rx_ring->napi);
+		work_done++;
+	}
 	ql_enable_completion_interrupt(qdev, intr_context->intr);
 	return work_done ? IRQ_HANDLED : IRQ_NONE;
 }
@@ -2149,6 +2208,7 @@
 			__func__, tx_ring_idx);
 		netif_stop_subqueue(ndev, tx_ring->wq_id);
 		atomic_inc(&tx_ring->queue_stopped);
+		tx_ring->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
 	tx_ring_desc = &tx_ring->q[tx_ring->prod_idx];
@@ -2183,6 +2243,7 @@
 			NETDEV_TX_OK) {
 		QPRINTK(qdev, TX_QUEUED, ERR,
 				"Could not map the segments.\n");
+		tx_ring->tx_errors++;
 		return NETDEV_TX_BUSY;
 	}
 	QL_DUMP_OB_MAC_IOCB(mac_iocb_ptr);
@@ -2199,6 +2260,7 @@
 	return NETDEV_TX_OK;
 }
 
+
 static void ql_free_shadow_space(struct ql_adapter *qdev)
 {
 	if (qdev->rx_ring_shadow_reg_area) {
@@ -2304,20 +2366,29 @@
 
 static void ql_free_lbq_buffers(struct ql_adapter *qdev, struct rx_ring *rx_ring)
 {
-	int i;
 	struct bq_desc *lbq_desc;
 
-	for (i = 0; i < rx_ring->lbq_len; i++) {
-		lbq_desc = &rx_ring->lbq[i];
-		if (lbq_desc->p.lbq_page) {
-			pci_unmap_page(qdev->pdev,
-				       pci_unmap_addr(lbq_desc, mapaddr),
-				       pci_unmap_len(lbq_desc, maplen),
-				       PCI_DMA_FROMDEVICE);
+	uint32_t  curr_idx, clean_idx;
 
-			put_page(lbq_desc->p.lbq_page);
-			lbq_desc->p.lbq_page = NULL;
+	curr_idx = rx_ring->lbq_curr_idx;
+	clean_idx = rx_ring->lbq_clean_idx;
+	while (curr_idx != clean_idx) {
+		lbq_desc = &rx_ring->lbq[curr_idx];
+
+		if (lbq_desc->p.pg_chunk.last_flag) {
+			pci_unmap_page(qdev->pdev,
+				lbq_desc->p.pg_chunk.map,
+				ql_lbq_block_size(qdev),
+				       PCI_DMA_FROMDEVICE);
+			lbq_desc->p.pg_chunk.last_flag = 0;
 		}
+
+		put_page(lbq_desc->p.pg_chunk.page);
+		lbq_desc->p.pg_chunk.page = NULL;
+
+		if (++curr_idx == rx_ring->lbq_len)
+			curr_idx = 0;
+
 	}
 }
 
@@ -2615,6 +2686,7 @@
 	/* Set up the shadow registers for this ring. */
 	rx_ring->prod_idx_sh_reg = shadow_reg;
 	rx_ring->prod_idx_sh_reg_dma = shadow_reg_dma;
+	*rx_ring->prod_idx_sh_reg = 0;
 	shadow_reg += sizeof(u64);
 	shadow_reg_dma += sizeof(u64);
 	rx_ring->lbq_base_indirect = shadow_reg;
@@ -2692,7 +2764,7 @@
 		cqicb->sbq_addr =
 		    cpu_to_le64(rx_ring->sbq_base_indirect_dma);
 		cqicb->sbq_buf_size =
-		    cpu_to_le16((u16)(rx_ring->sbq_buf_size/2));
+		    cpu_to_le16((u16)(rx_ring->sbq_buf_size));
 		bq_len = (rx_ring->sbq_len == 65536) ? 0 :
 			(u16) rx_ring->sbq_len;
 		cqicb->sbq_len = cpu_to_le16(bq_len);
@@ -3268,7 +3340,7 @@
 	ql_write32(qdev, FSC, mask | value);
 
 	ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
-		min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
+		min(SMALL_BUF_MAP_SIZE, MAX_SPLIT_SIZE));
 
 	/* Set RX packet routing to use port/pci function on which the
 	 * packet arrived on in addition to usual frame routing.
@@ -3276,6 +3348,22 @@
 	 * the same MAC address.
 	 */
 	ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+	/* Reroute all packets to our Interface.
+	 * They may have been routed to MPI firmware
+	 * due to WOL.
+	 */
+	value = ql_read32(qdev, MGMT_RCV_CFG);
+	value &= ~MGMT_RCV_CFG_RM;
+	mask = 0xffff0000;
+
+	/* Sticky reg needs clearing due to WOL. */
+	ql_write32(qdev, MGMT_RCV_CFG, mask);
+	ql_write32(qdev, MGMT_RCV_CFG, mask | value);
+
+	/* Default WOL is enable on Mezz cards */
+	if (qdev->pdev->subsystem_device == 0x0068 ||
+			qdev->pdev->subsystem_device == 0x0180)
+		qdev->wol = WAKE_MAGIC;
 
 	/* Start up the rx queues. */
 	for (i = 0; i < qdev->rx_ring_count; i++) {
@@ -3310,10 +3398,8 @@
 
 	/* Initialize the port and set the max framesize. */
 	status = qdev->nic_ops->port_initialize(qdev);
-       if (status) {
-              QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
-              return status;
-       }
+	if (status)
+		QPRINTK(qdev, IFUP, ERR, "Failed to start port.\n");
 
 	/* Set up the MAC address and frame routing filter. */
 	status = ql_cam_route_initialize(qdev);
@@ -3392,6 +3478,55 @@
 	QPRINTK(qdev, PROBE, INFO, "MAC address %pM\n", ndev->dev_addr);
 }
 
+int ql_wol(struct ql_adapter *qdev)
+{
+	int status = 0;
+	u32 wol = MB_WOL_DISABLE;
+
+	/* The CAM is still intact after a reset, but if we
+	 * are doing WOL, then we may need to program the
+	 * routing regs. We would also need to issue the mailbox
+	 * commands to instruct the MPI what to do per the ethtool
+	 * settings.
+	 */
+
+	if (qdev->wol & (WAKE_ARP | WAKE_MAGICSECURE | WAKE_PHY | WAKE_UCAST |
+			WAKE_MCAST | WAKE_BCAST)) {
+		QPRINTK(qdev, IFDOWN, ERR,
+			"Unsupported WOL paramter. qdev->wol = 0x%x.\n",
+			qdev->wol);
+		return -EINVAL;
+	}
+
+	if (qdev->wol & WAKE_MAGIC) {
+		status = ql_mb_wol_set_magic(qdev, 1);
+		if (status) {
+			QPRINTK(qdev, IFDOWN, ERR,
+				"Failed to set magic packet on %s.\n",
+				qdev->ndev->name);
+			return status;
+		} else
+			QPRINTK(qdev, DRV, INFO,
+				"Enabled magic packet successfully on %s.\n",
+				qdev->ndev->name);
+
+		wol |= MB_WOL_MAGIC_PKT;
+	}
+
+	if (qdev->wol) {
+		/* Reroute all packets to Management Interface */
+		ql_write32(qdev, MGMT_RCV_CFG, (MGMT_RCV_CFG_RM |
+			(MGMT_RCV_CFG_RM << 16)));
+		wol |= MB_WOL_MODE_ON;
+		status = ql_mb_wol_mode(qdev, wol);
+		QPRINTK(qdev, DRV, ERR, "WOL %s (wol code 0x%x) on %s\n",
+			(status == 0) ? "Sucessfully set" : "Failed", wol,
+			qdev->ndev->name);
+	}
+
+	return status;
+}
+
 static int ql_adapter_down(struct ql_adapter *qdev)
 {
 	int i, status = 0;
@@ -3497,6 +3632,10 @@
 	struct rx_ring *rx_ring;
 	struct tx_ring *tx_ring;
 	int cpu_cnt = min(MAX_CPUS, (int)num_online_cpus());
+	unsigned int lbq_buf_len = (qdev->ndev->mtu > 1500) ?
+		LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
+
+	qdev->lbq_buf_order = get_order(lbq_buf_len);
 
 	/* In a perfect world we have one RSS ring for each CPU
 	 * and each has it's own vector.  To do that we ask for
@@ -3544,11 +3683,14 @@
 			rx_ring->lbq_len = NUM_LARGE_BUFFERS;
 			rx_ring->lbq_size =
 			    rx_ring->lbq_len * sizeof(__le64);
-			rx_ring->lbq_buf_size = LARGE_BUFFER_SIZE;
+			rx_ring->lbq_buf_size = (u16)lbq_buf_len;
+			QPRINTK(qdev, IFUP, DEBUG,
+				"lbq_buf_size %d, order = %d\n",
+				rx_ring->lbq_buf_size, qdev->lbq_buf_order);
 			rx_ring->sbq_len = NUM_SMALL_BUFFERS;
 			rx_ring->sbq_size =
 			    rx_ring->sbq_len * sizeof(__le64);
-			rx_ring->sbq_buf_size = SMALL_BUFFER_SIZE * 2;
+			rx_ring->sbq_buf_size = SMALL_BUF_MAP_SIZE;
 			rx_ring->type = RX_Q;
 		} else {
 			/*
@@ -3594,14 +3736,63 @@
 	return err;
 }
 
+static int ql_change_rx_buffers(struct ql_adapter *qdev)
+{
+	struct rx_ring *rx_ring;
+	int i, status;
+	u32 lbq_buf_len;
+
+	/* Wait for an oustanding reset to complete. */
+	if (!test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+		int i = 3;
+		while (i-- && !test_bit(QL_ADAPTER_UP, &qdev->flags)) {
+			QPRINTK(qdev, IFUP, ERR,
+				 "Waiting for adapter UP...\n");
+			ssleep(1);
+		}
+
+		if (!i) {
+			QPRINTK(qdev, IFUP, ERR,
+			 "Timed out waiting for adapter UP\n");
+			return -ETIMEDOUT;
+		}
+	}
+
+	status = ql_adapter_down(qdev);
+	if (status)
+		goto error;
+
+	/* Get the new rx buffer size. */
+	lbq_buf_len = (qdev->ndev->mtu > 1500) ?
+		LARGE_BUFFER_MAX_SIZE : LARGE_BUFFER_MIN_SIZE;
+	qdev->lbq_buf_order = get_order(lbq_buf_len);
+
+	for (i = 0; i < qdev->rss_ring_count; i++) {
+		rx_ring = &qdev->rx_ring[i];
+		/* Set the new size. */
+		rx_ring->lbq_buf_size = lbq_buf_len;
+	}
+
+	status = ql_adapter_up(qdev);
+	if (status)
+		goto error;
+
+	return status;
+error:
+	QPRINTK(qdev, IFUP, ALERT,
+		"Driver up/down cycle failed, closing device.\n");
+	set_bit(QL_ADAPTER_UP, &qdev->flags);
+	dev_close(qdev->ndev);
+	return status;
+}
+
 static int qlge_change_mtu(struct net_device *ndev, int new_mtu)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
+	int status;
 
 	if (ndev->mtu == 1500 && new_mtu == 9000) {
 		QPRINTK(qdev, IFUP, ERR, "Changing to jumbo MTU.\n");
-		queue_delayed_work(qdev->workqueue,
-				&qdev->mpi_port_cfg_work, 0);
 	} else if (ndev->mtu == 9000 && new_mtu == 1500) {
 		QPRINTK(qdev, IFUP, ERR, "Changing to normal MTU.\n");
 	} else if ((ndev->mtu == 1500 && new_mtu == 1500) ||
@@ -3609,15 +3800,60 @@
 		return 0;
 	} else
 		return -EINVAL;
+
+	queue_delayed_work(qdev->workqueue,
+			&qdev->mpi_port_cfg_work, 3*HZ);
+
+	if (!netif_running(qdev->ndev)) {
+		ndev->mtu = new_mtu;
+		return 0;
+	}
+
 	ndev->mtu = new_mtu;
-	return 0;
+	status = ql_change_rx_buffers(qdev);
+	if (status) {
+		QPRINTK(qdev, IFUP, ERR,
+			"Changing MTU failed.\n");
+	}
+
+	return status;
 }
 
 static struct net_device_stats *qlge_get_stats(struct net_device
 					       *ndev)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	return &qdev->stats;
+	struct rx_ring *rx_ring = &qdev->rx_ring[0];
+	struct tx_ring *tx_ring = &qdev->tx_ring[0];
+	unsigned long pkts, mcast, dropped, errors, bytes;
+	int i;
+
+	/* Get RX stats. */
+	pkts = mcast = dropped = errors = bytes = 0;
+	for (i = 0; i < qdev->rss_ring_count; i++, rx_ring++) {
+			pkts += rx_ring->rx_packets;
+			bytes += rx_ring->rx_bytes;
+			dropped += rx_ring->rx_dropped;
+			errors += rx_ring->rx_errors;
+			mcast += rx_ring->rx_multicast;
+	}
+	ndev->stats.rx_packets = pkts;
+	ndev->stats.rx_bytes = bytes;
+	ndev->stats.rx_dropped = dropped;
+	ndev->stats.rx_errors = errors;
+	ndev->stats.multicast = mcast;
+
+	/* Get TX stats. */
+	pkts = errors = bytes = 0;
+	for (i = 0; i < qdev->tx_ring_count; i++, tx_ring++) {
+			pkts += tx_ring->tx_packets;
+			bytes += tx_ring->tx_bytes;
+			errors += tx_ring->tx_errors;
+	}
+	ndev->stats.tx_packets = pkts;
+	ndev->stats.tx_bytes = bytes;
+	ndev->stats.tx_errors = errors;
+	return &ndev->stats;
 }
 
 static void qlge_set_multicast_list(struct net_device *ndev)
@@ -3868,8 +4104,7 @@
 				    struct net_device *ndev, int cards_found)
 {
 	struct ql_adapter *qdev = netdev_priv(ndev);
-	int pos, err = 0;
-	u16 val16;
+	int err = 0;
 
 	memset((void *)qdev, 0, sizeof(*qdev));
 	err = pci_enable_device(pdev);
@@ -3881,18 +4116,12 @@
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
 	pci_set_drvdata(pdev, ndev);
-	pos = pci_find_capability(pdev, PCI_CAP_ID_EXP);
-	if (pos <= 0) {
-		dev_err(&pdev->dev, PFX "Cannot find PCI Express capability, "
-			"aborting.\n");
-		return pos;
-	} else {
-		pci_read_config_word(pdev, pos + PCI_EXP_DEVCTL, &val16);
-		val16 &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
-		val16 |= (PCI_EXP_DEVCTL_CERE |
-			  PCI_EXP_DEVCTL_NFERE |
-			  PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE);
-		pci_write_config_word(pdev, pos + PCI_EXP_DEVCTL, val16);
+
+	/* Set PCIe read request size */
+	err = pcie_set_readrq(pdev, 4096);
+	if (err) {
+		dev_err(&pdev->dev, "Set readrq failed.\n");
+		goto err_out;
 	}
 
 	err = pci_request_regions(pdev, DRV_NAME);
@@ -3989,7 +4218,6 @@
 	return err;
 }
 
-
 static const struct net_device_ops qlge_netdev_ops = {
 	.ndo_open		= qlge_open,
 	.ndo_stop		= qlge_close,
@@ -4000,9 +4228,9 @@
 	.ndo_set_mac_address	= qlge_set_mac_address,
 	.ndo_validate_addr	= eth_validate_addr,
 	.ndo_tx_timeout		= qlge_tx_timeout,
-	.ndo_vlan_rx_register	= ql_vlan_rx_register,
-	.ndo_vlan_rx_add_vid	= ql_vlan_rx_add_vid,
-	.ndo_vlan_rx_kill_vid	= ql_vlan_rx_kill_vid,
+	.ndo_vlan_rx_register	= qlge_vlan_rx_register,
+	.ndo_vlan_rx_add_vid	= qlge_vlan_rx_add_vid,
+	.ndo_vlan_rx_kill_vid	= qlge_vlan_rx_kill_vid,
 };
 
 static int __devinit qlge_probe(struct pci_dev *pdev,
@@ -4058,10 +4286,21 @@
 	}
 	ql_link_off(qdev);
 	ql_display_dev_info(ndev);
+	atomic_set(&qdev->lb_count, 0);
 	cards_found++;
 	return 0;
 }
 
+netdev_tx_t ql_lb_send(struct sk_buff *skb, struct net_device *ndev)
+{
+	return qlge_send(skb, ndev);
+}
+
+int ql_clean_lb_rx_ring(struct rx_ring *rx_ring, int budget)
+{
+	return ql_clean_inbound_rx_ring(rx_ring, budget);
+}
+
 static void __devexit qlge_remove(struct pci_dev *pdev)
 {
 	struct net_device *ndev = pci_get_drvdata(pdev);
@@ -4191,6 +4430,7 @@
 			return err;
 	}
 
+	ql_wol(qdev);
 	err = pci_save_state(pdev);
 	if (err)
 		return err;
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index bcf13c9..f5619fe 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -1,25 +1,5 @@
 #include "qlge.h"
 
-static void ql_display_mb_sts(struct ql_adapter *qdev,
-						struct mbox_params *mbcp)
-{
-	int i;
-	static char *err_sts[] = {
-		"Command Complete",
-		"Command Not Supported",
-		"Host Interface Error",
-		"Checksum Error",
-		"Unused Completion Status",
-		"Test Failed",
-		"Command Parameter Error"};
-
-	QPRINTK(qdev, DRV, DEBUG, "%s.\n",
-		err_sts[mbcp->mbox_out[0] & 0x0000000f]);
-	for (i = 0; i < mbcp->out_count; i++)
-		QPRINTK(qdev, DRV, DEBUG, "mbox_out[%d] = 0x%.08x.\n",
-				i, mbcp->mbox_out[i]);
-}
-
 int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data)
 {
 	int status;
@@ -317,6 +297,7 @@
 	} else {
 		QPRINTK(qdev, DRV, ERR, "Firmware Revision  = 0x%.08x.\n",
 			mbcp->mbox_out[1]);
+		qdev->fw_rev_id = mbcp->mbox_out[1];
 		status = ql_cam_route_initialize(qdev);
 		if (status)
 			QPRINTK(qdev, IFUP, ERR,
@@ -446,6 +427,9 @@
 		ql_aen_lost(qdev, mbcp);
 		break;
 
+	case AEN_DCBX_CHG:
+		/* Need to support AEN 8110 */
+		break;
 	default:
 		QPRINTK(qdev, DRV, ERR,
 			"Unsupported AE %.08x.\n", mbcp->mbox_out[0]);
@@ -537,7 +521,6 @@
 					MB_CMD_STS_GOOD) &&
 		((mbcp->mbox_out[0] & 0x0000f000) !=
 					MB_CMD_STS_INTRMDT)) {
-		ql_display_mb_sts(qdev, mbcp);
 		status = -EIO;
 	}
 end:
@@ -655,7 +638,7 @@
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_set_port_cfg(struct ql_adapter *qdev)
+int ql_mb_set_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -690,7 +673,7 @@
  * for the current port.
  * Most likely will block.
  */
-static int ql_mb_get_port_cfg(struct ql_adapter *qdev)
+int ql_mb_get_port_cfg(struct ql_adapter *qdev)
 {
 	struct mbox_params mbc;
 	struct mbox_params *mbcp = &mbc;
@@ -720,6 +703,76 @@
 	return status;
 }
 
+int ql_mb_wol_mode(struct ql_adapter *qdev, u32 wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MODE;
+	mbcp->mbox_in[1] = wol;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int ql_mb_wol_set_magic(struct ql_adapter *qdev, u32 enable_wol)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+	u8 *addr = qdev->ndev->dev_addr;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 8;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_WOL_MAGIC;
+	if (enable_wol) {
+		mbcp->mbox_in[1] = (u32)addr[0];
+		mbcp->mbox_in[2] = (u32)addr[1];
+		mbcp->mbox_in[3] = (u32)addr[2];
+		mbcp->mbox_in[4] = (u32)addr[3];
+		mbcp->mbox_in[5] = (u32)addr[4];
+		mbcp->mbox_in[6] = (u32)addr[5];
+		mbcp->mbox_in[7] = 0;
+	} else {
+		mbcp->mbox_in[1] = 0;
+		mbcp->mbox_in[2] = 1;
+		mbcp->mbox_in[3] = 1;
+		mbcp->mbox_in[4] = 1;
+		mbcp->mbox_in[5] = 1;
+		mbcp->mbox_in[6] = 1;
+		mbcp->mbox_in[7] = 0;
+	}
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set WOL mode.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
 /* IDC - Inter Device Communication...
  * Some firmware commands require consent of adjacent FCOE
  * function.  This function waits for the OK, or a
@@ -769,6 +822,61 @@
 	return status;
 }
 
+int ql_mb_set_led_cfg(struct ql_adapter *qdev, u32 led_config)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 2;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_LED_CFG;
+	mbcp->mbox_in[1] = led_config;
+
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to set LED Configuration.\n");
+		status = -EIO;
+	}
+
+	return status;
+}
+
+int ql_mb_get_led_cfg(struct ql_adapter *qdev)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_LED_CFG;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to get LED Configuration.\n");
+		status = -EIO;
+	} else
+		qdev->led_config = mbcp->mbox_out[1];
+
+	return status;
+}
+
 int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
 {
 	struct mbox_params mbc;
@@ -930,8 +1038,11 @@
 	int status;
 	struct mbox_params *mbcp = &qdev->idc_mbc;
 	u32 aen;
+	int timeout;
 
+	rtnl_lock();
 	aen = mbcp->mbox_out[1] >> 16;
+	timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
 
 	switch (aen) {
 	default:
@@ -939,22 +1050,61 @@
 			"Bug: Unhandled IDC action.\n");
 		break;
 	case MB_CMD_PORT_RESET:
-	case MB_CMD_SET_PORT_CFG:
 	case MB_CMD_STOP_FW:
 		ql_link_off(qdev);
+	case MB_CMD_SET_PORT_CFG:
 		/* Signal the resulting link up AEN
 		 * that the frame routing and mac addr
 		 * needs to be set.
 		 * */
 		set_bit(QL_CAM_RT_SET, &qdev->flags);
-		rtnl_lock();
-		status = ql_mb_idc_ack(qdev);
-		rtnl_unlock();
-		if (status) {
-			QPRINTK(qdev, DRV, ERR,
-			"Bug: No pending IDC!\n");
+		/* Do ACK if required */
+		if (timeout) {
+			status = ql_mb_idc_ack(qdev);
+			if (status)
+				QPRINTK(qdev, DRV, ERR,
+					"Bug: No pending IDC!\n");
+		} else {
+			QPRINTK(qdev, DRV, DEBUG,
+				    "IDC ACK not required\n");
+			status = 0; /* success */
 		}
+		break;
+
+	/* These sub-commands issued by another (FCoE)
+	 * function are requesting to do an operation
+	 * on the shared resource (MPI environment).
+	 * We currently don't issue these so we just
+	 * ACK the request.
+	 */
+	case MB_CMD_IOP_RESTART_MPI:
+	case MB_CMD_IOP_PREP_LINK_DOWN:
+		/* Drop the link, reload the routing
+		 * table when link comes up.
+		 */
+		ql_link_off(qdev);
+		set_bit(QL_CAM_RT_SET, &qdev->flags);
+		/* Fall through. */
+	case MB_CMD_IOP_DVR_START:
+	case MB_CMD_IOP_FLASH_ACC:
+	case MB_CMD_IOP_CORE_DUMP_MPI:
+	case MB_CMD_IOP_PREP_UPDATE_MPI:
+	case MB_CMD_IOP_COMP_UPDATE_MPI:
+	case MB_CMD_IOP_NONE:	/*  an IDC without params */
+		/* Do ACK if required */
+		if (timeout) {
+			status = ql_mb_idc_ack(qdev);
+			if (status)
+				QPRINTK(qdev, DRV, ERR,
+				    "Bug: No pending IDC!\n");
+		} else {
+			QPRINTK(qdev, DRV, DEBUG,
+			    "IDC ACK not required\n");
+			status = 0; /* success */
+		}
+		break;
 	}
+	rtnl_unlock();
 }
 
 void ql_mpi_work(struct work_struct *work)
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index fa49356..1b0aa4c 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -4443,13 +4443,12 @@
 	if (pkt_size >= rx_copybreak)
 		goto out;
 
-	skb = netdev_alloc_skb(tp->dev, pkt_size + NET_IP_ALIGN);
+	skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
 	if (!skb)
 		goto out;
 
 	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, pkt_size,
 				    PCI_DMA_FROMDEVICE);
-	skb_reserve(skb, NET_IP_ALIGN);
 	skb_copy_from_linear_data(*sk_buff, skb->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 508551f..7269a87 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -1476,7 +1476,6 @@
 		V_MAC_TX_RL_THRSH(4) |
 		V_MAC_RX_PL_THRSH(4) |
 		V_MAC_RX_RD_THRSH(4) |	/* Must be '4' */
-		V_MAC_RX_PL_THRSH(4) |
 		V_MAC_RX_RL_THRSH(8) |
 		0;
 
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index 8d60300..b7e0eb4 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -793,7 +793,7 @@
 
 		rx_len -= rx_size_align + 4;
 
-		skb = netdev_alloc_skb(dev, pkt_size + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, pkt_size);
 		if (unlikely(!skb)) {
 			if (printk_ratelimit())
 				printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
@@ -801,8 +801,6 @@
 			goto next;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
 			memcpy(skb_put(skb, RX_BUF_LEN - rx_ring_offset),
 				rx_ring + rx_ring_offset, RX_BUF_LEN - rx_ring_offset);
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
index b89f9be..7b52fe1 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/sfc/Makefile
@@ -1,6 +1,6 @@
 sfc-y			+= efx.o falcon.o tx.o rx.o falcon_gmac.o \
-			   falcon_xmac.o selftest.o ethtool.o xfp_phy.o \
-			   mdio_10g.o tenxpress.o boards.o sfe4001.o
+			   falcon_xmac.o selftest.o ethtool.o qt202x_phy.o \
+			   mdio_10g.o tenxpress.o falcon_boards.o
 sfc-$(CONFIG_SFC_MTD)	+= mtd.o
 
 obj-$(CONFIG_SFC)	+= sfc.o
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
index d54d84c..6ad909b 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/sfc/bitfield.h
@@ -520,19 +520,6 @@
 #define EFX_SET_QWORD_FIELD EFX_SET_QWORD_FIELD32
 #endif
 
-#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
-	if (falcon_rev(efx) >= FALCON_REV_B0) {			   \
-		EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
-	} else { \
-		EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
-	} \
-} while (0)
-
-#define EFX_QWORD_FIELD_VER(efx, qword, field)	\
-	(falcon_rev(efx) >= FALCON_REV_B0 ?	\
-	 EFX_QWORD_FIELD((qword), field##_B0) :	\
-	 EFX_QWORD_FIELD((qword), field##_A1))
-
 /* Used to avoid compiler warnings about shift range exceeding width
  * of the data types when dma_addr_t is only 32 bits wide.
  */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
deleted file mode 100644
index 4a4c74c..0000000
--- a/drivers/net/sfc/boards.c
+++ /dev/null
@@ -1,328 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#include "net_driver.h"
-#include "phy.h"
-#include "boards.h"
-#include "efx.h"
-#include "workarounds.h"
-
-/* Macros for unpacking the board revision */
-/* The revision info is in host byte order. */
-#define BOARD_TYPE(_rev) (_rev >> 8)
-#define BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
-#define BOARD_MINOR(_rev) (_rev & 0xf)
-
-/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
-#define BLINK_INTERVAL (HZ/2)
-
-static void blink_led_timer(unsigned long context)
-{
-	struct efx_nic *efx = (struct efx_nic *)context;
-	struct efx_blinker *bl = &efx->board_info.blinker;
-	efx->board_info.set_id_led(efx, bl->state);
-	bl->state = !bl->state;
-	if (bl->resubmit)
-		mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
-}
-
-static void board_blink(struct efx_nic *efx, bool blink)
-{
-	struct efx_blinker *blinker = &efx->board_info.blinker;
-
-	/* The rtnl mutex serialises all ethtool ioctls, so
-	 * nothing special needs doing here. */
-	if (blink) {
-		blinker->resubmit = true;
-		blinker->state = false;
-		setup_timer(&blinker->timer, blink_led_timer,
-			    (unsigned long)efx);
-		mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
-	} else {
-		blinker->resubmit = false;
-		if (blinker->timer.function)
-			del_timer_sync(&blinker->timer);
-		efx->board_info.init_leds(efx);
-	}
-}
-
-/*****************************************************************************
- * Support for LM87 sensor chip used on several boards
- */
-#define LM87_REG_ALARMS1		0x41
-#define LM87_REG_ALARMS2		0x42
-#define LM87_IN_LIMITS(nr, _min, _max)			\
-	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
-#define LM87_AIN_LIMITS(nr, _min, _max)			\
-	0x3B + (nr), _max, 0x1A + (nr), _min
-#define LM87_TEMP_INT_LIMITS(_min, _max)		\
-	0x39, _max, 0x3A, _min
-#define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
-	0x37, _max, 0x38, _min
-
-#define LM87_ALARM_TEMP_INT		0x10
-#define LM87_ALARM_TEMP_EXT1		0x20
-
-#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
-
-static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
-			 const u8 *reg_values)
-{
-	struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
-	int rc;
-
-	if (!client)
-		return -EIO;
-
-	while (*reg_values) {
-		u8 reg = *reg_values++;
-		u8 value = *reg_values++;
-		rc = i2c_smbus_write_byte_data(client, reg, value);
-		if (rc)
-			goto err;
-	}
-
-	efx->board_info.hwmon_client = client;
-	return 0;
-
-err:
-	i2c_unregister_device(client);
-	return rc;
-}
-
-static void efx_fini_lm87(struct efx_nic *efx)
-{
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
-{
-	struct i2c_client *client = efx->board_info.hwmon_client;
-	s32 alarms1, alarms2;
-
-	/* If link is up then do not monitor temperature */
-	if (EFX_WORKAROUND_7884(efx) && efx->link_up)
-		return 0;
-
-	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
-	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
-	if (alarms1 < 0)
-		return alarms1;
-	if (alarms2 < 0)
-		return alarms2;
-	alarms1 &= mask;
-	alarms2 &= mask >> 8;
-	if (alarms1 || alarms2) {
-		EFX_ERR(efx,
-			"LM87 detected a hardware failure (status %02x:%02x)"
-			"%s%s\n",
-			alarms1, alarms2,
-			(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
-			(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
-		return -ERANGE;
-	}
-
-	return 0;
-}
-
-#else /* !CONFIG_SENSORS_LM87 */
-
-static inline int
-efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
-	      const u8 *reg_values)
-{
-	return 0;
-}
-static inline void efx_fini_lm87(struct efx_nic *efx)
-{
-}
-static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
-{
-	return 0;
-}
-
-#endif /* CONFIG_SENSORS_LM87 */
-
-/*****************************************************************************
- * Support for the SFE4002
- *
- */
-static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
-
-static const u8 sfe4002_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
-	0
-};
-
-static struct i2c_board_info sfe4002_hwmon_info = {
-	I2C_BOARD_INFO("lm87", 0x2e),
-	.platform_data	= &sfe4002_lm87_channel,
-};
-
-/****************************************************************************/
-/* LED allocations. Note that on rev A0 boards the schematic and the reality
- * differ: red and green are swapped. Below is the fixed (A1) layout (there
- * are only 3 A0 boards in existence, so no real reason to make this
- * conditional).
- */
-#define SFE4002_FAULT_LED (2)	/* Red */
-#define SFE4002_RX_LED    (0)	/* Green */
-#define SFE4002_TX_LED    (1)	/* Amber */
-
-static void sfe4002_init_leds(struct efx_nic *efx)
-{
-	/* Set the TX and RX LEDs to reflect status and activity, and the
-	 * fault LED off */
-	xfp_set_led(efx, SFE4002_TX_LED,
-		    QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
-	xfp_set_led(efx, SFE4002_RX_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
-	xfp_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
-}
-
-static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
-{
-	xfp_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
-			QUAKE_LED_OFF);
-}
-
-static int sfe4002_check_hw(struct efx_nic *efx)
-{
-	/* A0 board rev. 4002s report a temperature fault the whole time
-	 * (bad sensor) so we mask it out. */
-	unsigned alarm_mask =
-		(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
-		~LM87_ALARM_TEMP_EXT1 : ~0;
-
-	return efx_check_lm87(efx, alarm_mask);
-}
-
-static int sfe4002_init(struct efx_nic *efx)
-{
-	int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
-	if (rc)
-		return rc;
-	efx->board_info.monitor = sfe4002_check_hw;
-	efx->board_info.init_leds = sfe4002_init_leds;
-	efx->board_info.set_id_led = sfe4002_set_id_led;
-	efx->board_info.blink = board_blink;
-	efx->board_info.fini = efx_fini_lm87;
-	return 0;
-}
-
-/*****************************************************************************
- * Support for the SFN4112F
- *
- */
-static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
-
-static const u8 sfn4112f_lm87_regs[] = {
-	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
-	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
-	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
-	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
-	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
-	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
-	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
-	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
-	0
-};
-
-static struct i2c_board_info sfn4112f_hwmon_info = {
-	I2C_BOARD_INFO("lm87", 0x2e),
-	.platform_data	= &sfn4112f_lm87_channel,
-};
-
-#define SFN4112F_ACT_LED	0
-#define SFN4112F_LINK_LED	1
-
-static void sfn4112f_init_leds(struct efx_nic *efx)
-{
-	xfp_set_led(efx, SFN4112F_ACT_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
-	xfp_set_led(efx, SFN4112F_LINK_LED,
-		    QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
-}
-
-static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
-{
-	xfp_set_led(efx, SFN4112F_LINK_LED,
-		    state ? QUAKE_LED_ON : QUAKE_LED_OFF);
-}
-
-static int sfn4112f_check_hw(struct efx_nic *efx)
-{
-	/* Mask out unused sensors */
-	return efx_check_lm87(efx, ~0x48);
-}
-
-static int sfn4112f_init(struct efx_nic *efx)
-{
-	int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
-	if (rc)
-		return rc;
-	efx->board_info.monitor = sfn4112f_check_hw;
-	efx->board_info.init_leds = sfn4112f_init_leds;
-	efx->board_info.set_id_led = sfn4112f_set_id_led;
-	efx->board_info.blink = board_blink;
-	efx->board_info.fini = efx_fini_lm87;
-	return 0;
-}
-
-/* This will get expanded as board-specific details get moved out of the
- * PHY drivers. */
-struct efx_board_data {
-	enum efx_board_type type;
-	const char *ref_model;
-	const char *gen_type;
-	int (*init) (struct efx_nic *nic);
-};
-
-
-static struct efx_board_data board_data[] = {
-	{ EFX_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
-	{ EFX_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
-	{ EFX_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
-	  sfn4111t_init },
-	{ EFX_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
-	  sfn4112f_init },
-};
-
-void efx_set_board_info(struct efx_nic *efx, u16 revision_info)
-{
-	struct efx_board_data *data = NULL;
-	int i;
-
-	efx->board_info.type = BOARD_TYPE(revision_info);
-	efx->board_info.major = BOARD_MAJOR(revision_info);
-	efx->board_info.minor = BOARD_MINOR(revision_info);
-
-	for (i = 0; i < ARRAY_SIZE(board_data); i++)
-		if (board_data[i].type == efx->board_info.type)
-			data = &board_data[i];
-
-	if (data) {
-		EFX_INFO(efx, "board is %s rev %c%d\n",
-			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
-			 ? data->ref_model : data->gen_type,
-			 'A' + efx->board_info.major, efx->board_info.minor);
-		efx->board_info.init = data->init;
-	} else {
-		EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
-	}
-}
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
deleted file mode 100644
index 44942de..0000000
--- a/drivers/net/sfc/boards.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_BOARDS_H
-#define EFX_BOARDS_H
-
-/* Board IDs (must fit in 8 bits) */
-enum efx_board_type {
-	EFX_BOARD_SFE4001 = 1,
-	EFX_BOARD_SFE4002 = 2,
-	EFX_BOARD_SFN4111T = 0x51,
-	EFX_BOARD_SFN4112F = 0x52,
-};
-
-extern void efx_set_board_info(struct efx_nic *efx, u16 revision_info);
-
-/* SFE4001 (10GBASE-T) */
-extern int sfe4001_init(struct efx_nic *efx);
-/* SFN4111T (100/1000/10GBASE-T) */
-extern int sfn4111t_init(struct efx_nic *efx);
-
-#endif
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index cc4b2f9..0d0243b 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -228,26 +228,20 @@
 		if (channel->used_flags & EFX_USED_BY_RX &&
 		    efx->irq_rx_adaptive &&
 		    unlikely(++channel->irq_count == 1000)) {
-			unsigned old_irq_moderation = channel->irq_moderation;
-
 			if (unlikely(channel->irq_mod_score <
 				     irq_adapt_low_thresh)) {
-				channel->irq_moderation =
-					max_t(int,
-					      channel->irq_moderation -
-					      FALCON_IRQ_MOD_RESOLUTION,
-					      FALCON_IRQ_MOD_RESOLUTION);
+				if (channel->irq_moderation > 1) {
+					channel->irq_moderation -= 1;
+					falcon_set_int_moderation(channel);
+				}
 			} else if (unlikely(channel->irq_mod_score >
 					    irq_adapt_high_thresh)) {
-				channel->irq_moderation =
-					min(channel->irq_moderation +
-					    FALCON_IRQ_MOD_RESOLUTION,
-					    efx->irq_rx_moderation);
+				if (channel->irq_moderation <
+				    efx->irq_rx_moderation) {
+					channel->irq_moderation += 1;
+					falcon_set_int_moderation(channel);
+				}
 			}
-
-			if (channel->irq_moderation != old_irq_moderation)
-				falcon_set_int_moderation(channel);
-
 			channel->irq_count = 0;
 			channel->irq_mod_score = 0;
 		}
@@ -290,7 +284,7 @@
 	napi_disable(&channel->napi_str);
 
 	/* Poll the channel */
-	efx_process_channel(channel, efx->type->evq_size);
+	efx_process_channel(channel, EFX_EVQ_SIZE);
 
 	/* Ack the eventq. This may cause an interrupt to be generated
 	 * when they are reenabled */
@@ -824,9 +818,8 @@
 		goto fail2;
 	}
 
-	efx->membase_phys = pci_resource_start(efx->pci_dev,
-					       efx->type->mem_bar);
-	rc = pci_request_region(pci_dev, efx->type->mem_bar, "sfc");
+	efx->membase_phys = pci_resource_start(efx->pci_dev, EFX_MEM_BAR);
+	rc = pci_request_region(pci_dev, EFX_MEM_BAR, "sfc");
 	if (rc) {
 		EFX_ERR(efx, "request for memory BAR failed\n");
 		rc = -EIO;
@@ -835,21 +828,20 @@
 	efx->membase = ioremap_nocache(efx->membase_phys,
 				       efx->type->mem_map_size);
 	if (!efx->membase) {
-		EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
-			efx->type->mem_bar,
+		EFX_ERR(efx, "could not map memory BAR at %llx+%x\n",
 			(unsigned long long)efx->membase_phys,
 			efx->type->mem_map_size);
 		rc = -ENOMEM;
 		goto fail4;
 	}
-	EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
-		efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+	EFX_LOG(efx, "memory BAR at %llx+%x (virtual %p)\n",
+		(unsigned long long)efx->membase_phys,
 		efx->type->mem_map_size, efx->membase);
 
 	return 0;
 
  fail4:
-	pci_release_region(efx->pci_dev, efx->type->mem_bar);
+	pci_release_region(efx->pci_dev, EFX_MEM_BAR);
  fail3:
 	efx->membase_phys = 0;
  fail2:
@@ -868,7 +860,7 @@
 	}
 
 	if (efx->membase_phys) {
-		pci_release_region(efx->pci_dev, efx->type->mem_bar);
+		pci_release_region(efx->pci_dev, EFX_MEM_BAR);
 		efx->membase_phys = 0;
 	}
 
@@ -1220,22 +1212,33 @@
  *
  **************************************************************************/
 
+static unsigned irq_mod_ticks(int usecs, int resolution)
+{
+	if (usecs <= 0)
+		return 0; /* cannot receive interrupts ahead of time :-) */
+	if (usecs < resolution)
+		return 1; /* never round down to 0 */
+	return usecs / resolution;
+}
+
 /* Set interrupt moderation parameters */
 void efx_init_irq_moderation(struct efx_nic *efx, int tx_usecs, int rx_usecs,
 			     bool rx_adaptive)
 {
 	struct efx_tx_queue *tx_queue;
 	struct efx_rx_queue *rx_queue;
+	unsigned tx_ticks = irq_mod_ticks(tx_usecs, FALCON_IRQ_MOD_RESOLUTION);
+	unsigned rx_ticks = irq_mod_ticks(rx_usecs, FALCON_IRQ_MOD_RESOLUTION);
 
 	EFX_ASSERT_RESET_SERIALISED(efx);
 
 	efx_for_each_tx_queue(tx_queue, efx)
-		tx_queue->channel->irq_moderation = tx_usecs;
+		tx_queue->channel->irq_moderation = tx_ticks;
 
 	efx->irq_rx_adaptive = rx_adaptive;
-	efx->irq_rx_moderation = rx_usecs;
+	efx->irq_rx_moderation = rx_ticks;
 	efx_for_each_rx_queue(rx_queue, efx)
-		rx_queue->channel->irq_moderation = rx_usecs;
+		rx_queue->channel->irq_moderation = rx_ticks;
 }
 
 /**************************************************************************
@@ -1981,17 +1984,9 @@
 
 	efx->type = type;
 
-	/* Sanity-check NIC type */
-	EFX_BUG_ON_PARANOID(efx->type->txd_ring_mask &
-			    (efx->type->txd_ring_mask + 1));
-	EFX_BUG_ON_PARANOID(efx->type->rxd_ring_mask &
-			    (efx->type->rxd_ring_mask + 1));
-	EFX_BUG_ON_PARANOID(efx->type->evq_size &
-			    (efx->type->evq_size - 1));
 	/* As close as we can get to guaranteeing that we don't overflow */
-	EFX_BUG_ON_PARANOID(efx->type->evq_size <
-			    (efx->type->txd_ring_mask + 1 +
-			     efx->type->rxd_ring_mask + 1));
+	BUILD_BUG_ON(EFX_EVQ_SIZE < EFX_TXQ_SIZE + EFX_RXQ_SIZE);
+
 	EFX_BUG_ON_PARANOID(efx->type->phys_addr_channels > EFX_MAX_CHANNELS);
 
 	/* Higher numbered interrupt modes are less capable! */
@@ -2027,18 +2022,12 @@
  */
 static void efx_pci_remove_main(struct efx_nic *efx)
 {
-	EFX_ASSERT_RESET_SERIALISED(efx);
-
-	/* Skip everything if we never obtained a valid membase */
-	if (!efx->membase)
-		return;
-
+	falcon_fini_interrupt(efx);
 	efx_fini_channels(efx);
 	efx_fini_port(efx);
 
 	/* Shutdown the board, then the NIC and board state */
 	efx->board_info.fini(efx);
-	falcon_fini_interrupt(efx);
 
 	efx_fini_napi(efx);
 	efx_remove_all(efx);
@@ -2063,9 +2052,6 @@
 	/* Allow any queued efx_resets() to complete */
 	rtnl_unlock();
 
-	if (efx->membase == NULL)
-		goto out;
-
 	efx_unregister_netdev(efx);
 
 	efx_mtd_remove(efx);
@@ -2078,7 +2064,6 @@
 
 	efx_pci_remove_main(efx);
 
-out:
 	efx_fini_io(efx);
 	EFX_LOG(efx, "shutdown successful\n");
 
@@ -2224,13 +2209,15 @@
 	 * MAC stats succeeds. */
 	efx->state = STATE_RUNNING;
 
-	efx_mtd_probe(efx); /* allowed to fail */
-
 	rc = efx_register_netdev(efx);
 	if (rc)
 		goto fail5;
 
 	EFX_LOG(efx, "initialisation successful\n");
+
+	rtnl_lock();
+	efx_mtd_probe(efx); /* allowed to fail */
+	rtnl_unlock();
 	return 0;
 
  fail5:
diff --git a/drivers/net/sfc/efx.h b/drivers/net/sfc/efx.h
index aecaf62..179e0e3 100644
--- a/drivers/net/sfc/efx.h
+++ b/drivers/net/sfc/efx.h
@@ -19,22 +19,31 @@
 #define FALCON_A_S_DEVID        0x6703
 #define FALCON_B_P_DEVID        0x0710
 
+/* Solarstorm controllers use BAR 0 for I/O space and BAR 2(&3) for memory */
+#define EFX_MEM_BAR 2
+
 /* TX */
 extern netdev_tx_t efx_xmit(struct efx_nic *efx,
 				  struct efx_tx_queue *tx_queue,
 				  struct sk_buff *skb);
+extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern void efx_stop_queue(struct efx_nic *efx);
 extern void efx_wake_queue(struct efx_nic *efx);
+#define EFX_TXQ_SIZE 1024
+#define EFX_TXQ_MASK (EFX_TXQ_SIZE - 1)
 
 /* RX */
-extern void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index);
 extern void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index,
 			  unsigned int len, bool checksummed, bool discard);
 extern void efx_schedule_slow_fill(struct efx_rx_queue *rx_queue, int delay);
+#define EFX_RXQ_SIZE 1024
+#define EFX_RXQ_MASK (EFX_RXQ_SIZE - 1)
 
 /* Channels */
 extern void efx_process_channel_now(struct efx_channel *channel);
 extern void efx_flush_queues(struct efx_nic *efx);
+#define EFX_EVQ_SIZE 4096
+#define EFX_EVQ_MASK (EFX_EVQ_SIZE - 1)
 
 /* Ports */
 extern void efx_stats_disable(struct efx_nic *efx);
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 45018f2..a313b61 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -618,6 +618,9 @@
 	coalesce->use_adaptive_rx_coalesce = efx->irq_rx_adaptive;
 	coalesce->rx_coalesce_usecs_irq = efx->irq_rx_moderation;
 
+	coalesce->tx_coalesce_usecs_irq *= FALCON_IRQ_MOD_RESOLUTION;
+	coalesce->rx_coalesce_usecs_irq *= FALCON_IRQ_MOD_RESOLUTION;
+
 	return 0;
 }
 
@@ -656,11 +659,6 @@
 	}
 
 	efx_init_irq_moderation(efx, tx_usecs, rx_usecs, adaptive);
-
-	/* Reset channel to pick up new moderation value.  Note that
-	 * this may change the value of the irq_moderation field
-	 * (e.g. to allow for hardware timer granularity).
-	 */
 	efx_for_each_channel(channel, efx)
 		falcon_set_int_moderation(channel);
 
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index c049364..865638b 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -22,11 +22,10 @@
 #include "mac.h"
 #include "spi.h"
 #include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
+#include "regs.h"
+#include "io.h"
 #include "mdio_10g.h"
 #include "phy.h"
-#include "boards.h"
 #include "workarounds.h"
 
 /* Falcon hardware control.
@@ -36,19 +35,12 @@
 
 /**
  * struct falcon_nic_data - Falcon NIC state
- * @next_buffer_table: First available buffer table id
  * @pci_dev2: The secondary PCI device if present
  * @i2c_data: Operations and state for I2C bit-bashing algorithm
- * @int_error_count: Number of internal errors seen recently
- * @int_error_expire: Time at which error count will be expired
  */
 struct falcon_nic_data {
-	unsigned next_buffer_table;
 	struct pci_dev *pci_dev2;
 	struct i2c_algo_bit_data i2c_data;
-
-	unsigned int_error_count;
-	unsigned long int_error_expire;
 };
 
 /**************************************************************************
@@ -109,21 +101,6 @@
 module_param(rx_xon_thresh_bytes, int, 0644);
 MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold");
 
-/* TX descriptor ring size - min 512 max 4k */
-#define FALCON_TXD_RING_ORDER TX_DESCQ_SIZE_1K
-#define FALCON_TXD_RING_SIZE 1024
-#define FALCON_TXD_RING_MASK (FALCON_TXD_RING_SIZE - 1)
-
-/* RX descriptor ring size - min 512 max 4k */
-#define FALCON_RXD_RING_ORDER RX_DESCQ_SIZE_1K
-#define FALCON_RXD_RING_SIZE 1024
-#define FALCON_RXD_RING_MASK (FALCON_RXD_RING_SIZE - 1)
-
-/* Event queue size - max 32k */
-#define FALCON_EVQ_ORDER EVQ_SIZE_4K
-#define FALCON_EVQ_SIZE 4096
-#define FALCON_EVQ_MASK (FALCON_EVQ_SIZE - 1)
-
 /* If FALCON_MAX_INT_ERRORS internal errors occur within
  * FALCON_INT_ERROR_EXPIRE seconds, we consider the NIC broken and
  * disable it.
@@ -143,12 +120,6 @@
  **************************************************************************
  */
 
-/* DMA address mask */
-#define FALCON_DMA_MASK DMA_BIT_MASK(46)
-
-/* TX DMA length mask (13-bit) */
-#define FALCON_TX_DMA_MASK (4096 - 1)
-
 /* Size and alignment of special buffers (4KB) */
 #define FALCON_BUF_SIZE 4096
 
@@ -164,6 +135,13 @@
  *
  **************************************************************************/
 
+static inline void falcon_write_buf_tbl(struct efx_nic *efx, efx_qword_t *value,
+					unsigned int index)
+{
+	efx_sram_writeq(efx, efx->membase + efx->type->buf_tbl_base,
+			value, index);
+}
+
 /* Read the current event from the event queue */
 static inline efx_qword_t *falcon_event(struct efx_channel *channel,
 					unsigned int index)
@@ -200,9 +178,9 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN, !state);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN, !state);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
 }
 
 static void falcon_setscl(void *data, int state)
@@ -210,9 +188,9 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO0_OEN, !state);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO0_OEN, !state);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
 }
 
 static int falcon_getsda(void *data)
@@ -220,8 +198,8 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	return EFX_OWORD_FIELD(reg, GPIO3_IN);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	return EFX_OWORD_FIELD(reg, FRF_AB_GPIO3_IN);
 }
 
 static int falcon_getscl(void *data)
@@ -229,8 +207,8 @@
 	struct efx_nic *efx = (struct efx_nic *)data;
 	efx_oword_t reg;
 
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	return EFX_OWORD_FIELD(reg, GPIO0_IN);
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	return EFX_OWORD_FIELD(reg, FRF_AB_GPIO0_IN);
 }
 
 static struct i2c_algo_bit_data falcon_i2c_bit_operations = {
@@ -275,12 +253,11 @@
 		dma_addr = buffer->dma_addr + (i * 4096);
 		EFX_LOG(efx, "mapping special buffer %d at %llx\n",
 			index, (unsigned long long)dma_addr);
-		EFX_POPULATE_QWORD_4(buf_desc,
-				     IP_DAT_BUF_SIZE, IP_DAT_BUF_SIZE_4K,
-				     BUF_ADR_REGION, 0,
-				     BUF_ADR_FBUF, (dma_addr >> 12),
-				     BUF_OWNER_ID_FBUF, 0);
-		falcon_write_sram(efx, &buf_desc, index);
+		EFX_POPULATE_QWORD_3(buf_desc,
+				     FRF_AZ_BUF_ADR_REGION, 0,
+				     FRF_AZ_BUF_ADR_FBUF, dma_addr >> 12,
+				     FRF_AZ_BUF_OWNER_ID_FBUF, 0);
+		falcon_write_buf_tbl(efx, &buf_desc, index);
 	}
 }
 
@@ -300,11 +277,11 @@
 		buffer->index, buffer->index + buffer->entries - 1);
 
 	EFX_POPULATE_OWORD_4(buf_tbl_upd,
-			     BUF_UPD_CMD, 0,
-			     BUF_CLR_CMD, 1,
-			     BUF_CLR_END_ID, end,
-			     BUF_CLR_START_ID, start);
-	falcon_write(efx, &buf_tbl_upd, BUF_TBL_UPD_REG_KER);
+			     FRF_AZ_BUF_UPD_CMD, 0,
+			     FRF_AZ_BUF_CLR_CMD, 1,
+			     FRF_AZ_BUF_CLR_END_ID, end,
+			     FRF_AZ_BUF_CLR_START_ID, start);
+	efx_writeo(efx, &buf_tbl_upd, FR_AZ_BUF_TBL_UPD);
 }
 
 /*
@@ -320,8 +297,6 @@
 				       struct efx_special_buffer *buffer,
 				       unsigned int len)
 {
-	struct falcon_nic_data *nic_data = efx->nic_data;
-
 	len = ALIGN(len, FALCON_BUF_SIZE);
 
 	buffer->addr = pci_alloc_consistent(efx->pci_dev, len,
@@ -336,8 +311,8 @@
 	memset(buffer->addr, 0xff, len);
 
 	/* Select new buffer ID */
-	buffer->index = nic_data->next_buffer_table;
-	nic_data->next_buffer_table += buffer->entries;
+	buffer->index = efx->next_buffer_table;
+	efx->next_buffer_table += buffer->entries;
 
 	EFX_LOG(efx, "allocating special buffers %d-%d at %llx+%x "
 		"(virt %p phys %llx)\n", buffer->index,
@@ -415,10 +390,10 @@
 	unsigned write_ptr;
 	efx_dword_t reg;
 
-	write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
-	EFX_POPULATE_DWORD_1(reg, TX_DESC_WPTR_DWORD, write_ptr);
-	falcon_writel_page(tx_queue->efx, &reg,
-			   TX_DESC_UPD_REG_KER_DWORD, tx_queue->queue);
+	write_ptr = tx_queue->write_count & EFX_TXQ_MASK;
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_TX_DESC_WPTR_DWORD, write_ptr);
+	efx_writed_page(tx_queue->efx, &reg,
+			FR_AZ_TX_DESC_UPD_DWORD_P0, tx_queue->queue);
 }
 
 
@@ -436,18 +411,17 @@
 	BUG_ON(tx_queue->write_count == tx_queue->insert_count);
 
 	do {
-		write_ptr = tx_queue->write_count & FALCON_TXD_RING_MASK;
+		write_ptr = tx_queue->write_count & EFX_TXQ_MASK;
 		buffer = &tx_queue->buffer[write_ptr];
 		txd = falcon_tx_desc(tx_queue, write_ptr);
 		++tx_queue->write_count;
 
 		/* Create TX descriptor ring entry */
-		EFX_POPULATE_QWORD_5(*txd,
-				     TX_KER_PORT, 0,
-				     TX_KER_CONT, buffer->continuation,
-				     TX_KER_BYTE_CNT, buffer->len,
-				     TX_KER_BUF_REGION, 0,
-				     TX_KER_BUF_ADR, buffer->dma_addr);
+		EFX_POPULATE_QWORD_4(*txd,
+				     FSF_AZ_TX_KER_CONT, buffer->continuation,
+				     FSF_AZ_TX_KER_BYTE_COUNT, buffer->len,
+				     FSF_AZ_TX_KER_BUF_REGION, 0,
+				     FSF_AZ_TX_KER_BUF_ADDR, buffer->dma_addr);
 	} while (tx_queue->write_count != tx_queue->insert_count);
 
 	wmb(); /* Ensure descriptors are written before they are fetched */
@@ -458,9 +432,10 @@
 int falcon_probe_tx(struct efx_tx_queue *tx_queue)
 {
 	struct efx_nic *efx = tx_queue->efx;
+	BUILD_BUG_ON(EFX_TXQ_SIZE < 512 || EFX_TXQ_SIZE > 4096 ||
+		     EFX_TXQ_SIZE & EFX_TXQ_MASK);
 	return falcon_alloc_special_buffer(efx, &tx_queue->txd,
-					   FALCON_TXD_RING_SIZE *
-					   sizeof(efx_qword_t));
+					   EFX_TXQ_SIZE * sizeof(efx_qword_t));
 }
 
 void falcon_init_tx(struct efx_tx_queue *tx_queue)
@@ -475,25 +450,28 @@
 
 	/* Push TX descriptor ring to card */
 	EFX_POPULATE_OWORD_10(tx_desc_ptr,
-			      TX_DESCQ_EN, 1,
-			      TX_ISCSI_DDIG_EN, 0,
-			      TX_ISCSI_HDIG_EN, 0,
-			      TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index,
-			      TX_DESCQ_EVQ_ID, tx_queue->channel->channel,
-			      TX_DESCQ_OWNER_ID, 0,
-			      TX_DESCQ_LABEL, tx_queue->queue,
-			      TX_DESCQ_SIZE, FALCON_TXD_RING_ORDER,
-			      TX_DESCQ_TYPE, 0,
-			      TX_NON_IP_DROP_DIS_B0, 1);
+			      FRF_AZ_TX_DESCQ_EN, 1,
+			      FRF_AZ_TX_ISCSI_DDIG_EN, 0,
+			      FRF_AZ_TX_ISCSI_HDIG_EN, 0,
+			      FRF_AZ_TX_DESCQ_BUF_BASE_ID, tx_queue->txd.index,
+			      FRF_AZ_TX_DESCQ_EVQ_ID,
+			      tx_queue->channel->channel,
+			      FRF_AZ_TX_DESCQ_OWNER_ID, 0,
+			      FRF_AZ_TX_DESCQ_LABEL, tx_queue->queue,
+			      FRF_AZ_TX_DESCQ_SIZE,
+			      __ffs(tx_queue->txd.entries),
+			      FRF_AZ_TX_DESCQ_TYPE, 0,
+			      FRF_BZ_TX_NON_IP_DROP_DIS, 1);
 
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		int csum = tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM;
-		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, !csum);
-		EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, !csum);
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, FRF_BZ_TX_IP_CHKSM_DIS, !csum);
+		EFX_SET_OWORD_FIELD(tx_desc_ptr, FRF_BZ_TX_TCP_CHKSM_DIS,
+				    !csum);
 	}
 
-	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
-			   tx_queue->queue);
+	efx_writeo_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			 tx_queue->queue);
 
 	if (falcon_rev(efx) < FALCON_REV_B0) {
 		efx_oword_t reg;
@@ -501,12 +479,12 @@
 		/* Only 128 bits in this register */
 		BUILD_BUG_ON(EFX_TX_QUEUE_COUNT >= 128);
 
-		falcon_read(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
+		efx_reado(efx, &reg, FR_AA_TX_CHKSM_CFG);
 		if (tx_queue->queue == EFX_TX_QUEUE_OFFLOAD_CSUM)
 			clear_bit_le(tx_queue->queue, (void *)&reg);
 		else
 			set_bit_le(tx_queue->queue, (void *)&reg);
-		falcon_write(efx, &reg, TX_CHKSM_CFG_REG_KER_A1);
+		efx_writeo(efx, &reg, FR_AA_TX_CHKSM_CFG);
 	}
 }
 
@@ -517,9 +495,9 @@
 
 	/* Post a flush command */
 	EFX_POPULATE_OWORD_2(tx_flush_descq,
-			     TX_FLUSH_DESCQ_CMD, 1,
-			     TX_FLUSH_DESCQ, tx_queue->queue);
-	falcon_write(efx, &tx_flush_descq, TX_FLUSH_DESCQ_REG_KER);
+			     FRF_AZ_TX_FLUSH_DESCQ_CMD, 1,
+			     FRF_AZ_TX_FLUSH_DESCQ, tx_queue->queue);
+	efx_writeo(efx, &tx_flush_descq, FR_AZ_TX_FLUSH_DESCQ);
 }
 
 void falcon_fini_tx(struct efx_tx_queue *tx_queue)
@@ -532,8 +510,8 @@
 
 	/* Remove TX descriptor ring from card */
 	EFX_ZERO_OWORD(tx_desc_ptr);
-	falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
-			   tx_queue->queue);
+	efx_writeo_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
+			 tx_queue->queue);
 
 	/* Unpin TX descriptor ring */
 	falcon_fini_special_buffer(efx, &tx_queue->txd);
@@ -568,11 +546,11 @@
 	rxd = falcon_rx_desc(rx_queue, index);
 	rx_buf = efx_rx_buffer(rx_queue, index);
 	EFX_POPULATE_QWORD_3(*rxd,
-			     RX_KER_BUF_SIZE,
+			     FSF_AZ_RX_KER_BUF_SIZE,
 			     rx_buf->len -
 			     rx_queue->efx->type->rx_buffer_padding,
-			     RX_KER_BUF_REGION, 0,
-			     RX_KER_BUF_ADR, rx_buf->dma_addr);
+			     FSF_AZ_RX_KER_BUF_REGION, 0,
+			     FSF_AZ_RX_KER_BUF_ADDR, rx_buf->dma_addr);
 }
 
 /* This writes to the RX_DESC_WPTR register for the specified receive
@@ -586,23 +564,24 @@
 	while (rx_queue->notified_count != rx_queue->added_count) {
 		falcon_build_rx_desc(rx_queue,
 				     rx_queue->notified_count &
-				     FALCON_RXD_RING_MASK);
+				     EFX_RXQ_MASK);
 		++rx_queue->notified_count;
 	}
 
 	wmb();
-	write_ptr = rx_queue->added_count & FALCON_RXD_RING_MASK;
-	EFX_POPULATE_DWORD_1(reg, RX_DESC_WPTR_DWORD, write_ptr);
-	falcon_writel_page(rx_queue->efx, &reg,
-			   RX_DESC_UPD_REG_KER_DWORD, rx_queue->queue);
+	write_ptr = rx_queue->added_count & EFX_RXQ_MASK;
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_RX_DESC_WPTR_DWORD, write_ptr);
+	efx_writed_page(rx_queue->efx, &reg,
+			FR_AZ_RX_DESC_UPD_DWORD_P0, rx_queue->queue);
 }
 
 int falcon_probe_rx(struct efx_rx_queue *rx_queue)
 {
 	struct efx_nic *efx = rx_queue->efx;
+	BUILD_BUG_ON(EFX_RXQ_SIZE < 512 || EFX_RXQ_SIZE > 4096 ||
+		     EFX_RXQ_SIZE & EFX_RXQ_MASK);
 	return falcon_alloc_special_buffer(efx, &rx_queue->rxd,
-					   FALCON_RXD_RING_SIZE *
-					   sizeof(efx_qword_t));
+					   EFX_RXQ_SIZE * sizeof(efx_qword_t));
 }
 
 void falcon_init_rx(struct efx_rx_queue *rx_queue)
@@ -623,19 +602,21 @@
 
 	/* Push RX descriptor ring to card */
 	EFX_POPULATE_OWORD_10(rx_desc_ptr,
-			      RX_ISCSI_DDIG_EN, iscsi_digest_en,
-			      RX_ISCSI_HDIG_EN, iscsi_digest_en,
-			      RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index,
-			      RX_DESCQ_EVQ_ID, rx_queue->channel->channel,
-			      RX_DESCQ_OWNER_ID, 0,
-			      RX_DESCQ_LABEL, rx_queue->queue,
-			      RX_DESCQ_SIZE, FALCON_RXD_RING_ORDER,
-			      RX_DESCQ_TYPE, 0 /* kernel queue */ ,
+			      FRF_AZ_RX_ISCSI_DDIG_EN, iscsi_digest_en,
+			      FRF_AZ_RX_ISCSI_HDIG_EN, iscsi_digest_en,
+			      FRF_AZ_RX_DESCQ_BUF_BASE_ID, rx_queue->rxd.index,
+			      FRF_AZ_RX_DESCQ_EVQ_ID,
+			      rx_queue->channel->channel,
+			      FRF_AZ_RX_DESCQ_OWNER_ID, 0,
+			      FRF_AZ_RX_DESCQ_LABEL, rx_queue->queue,
+			      FRF_AZ_RX_DESCQ_SIZE,
+			      __ffs(rx_queue->rxd.entries),
+			      FRF_AZ_RX_DESCQ_TYPE, 0 /* kernel queue */ ,
 			      /* For >=B0 this is scatter so disable */
-			      RX_DESCQ_JUMBO, !is_b0,
-			      RX_DESCQ_EN, 1);
-	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
-			   rx_queue->queue);
+			      FRF_AZ_RX_DESCQ_JUMBO, !is_b0,
+			      FRF_AZ_RX_DESCQ_EN, 1);
+	efx_writeo_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			 rx_queue->queue);
 }
 
 static void falcon_flush_rx_queue(struct efx_rx_queue *rx_queue)
@@ -645,9 +626,9 @@
 
 	/* Post a flush command */
 	EFX_POPULATE_OWORD_2(rx_flush_descq,
-			     RX_FLUSH_DESCQ_CMD, 1,
-			     RX_FLUSH_DESCQ, rx_queue->queue);
-	falcon_write(efx, &rx_flush_descq, RX_FLUSH_DESCQ_REG_KER);
+			     FRF_AZ_RX_FLUSH_DESCQ_CMD, 1,
+			     FRF_AZ_RX_FLUSH_DESCQ, rx_queue->queue);
+	efx_writeo(efx, &rx_flush_descq, FR_AZ_RX_FLUSH_DESCQ);
 }
 
 void falcon_fini_rx(struct efx_rx_queue *rx_queue)
@@ -660,8 +641,8 @@
 
 	/* Remove RX descriptor ring from card */
 	EFX_ZERO_OWORD(rx_desc_ptr);
-	falcon_write_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
-			   rx_queue->queue);
+	efx_writeo_table(efx, &rx_desc_ptr, efx->type->rxd_ptr_tbl_base,
+			 rx_queue->queue);
 
 	/* Unpin RX descriptor ring */
 	falcon_fini_special_buffer(efx, &rx_queue->rxd);
@@ -694,8 +675,8 @@
 	efx_dword_t reg;
 	struct efx_nic *efx = channel->efx;
 
-	EFX_POPULATE_DWORD_1(reg, EVQ_RPTR_DWORD, channel->eventq_read_ptr);
-	falcon_writel_table(efx, &reg, efx->type->evq_rptr_tbl_base,
+	EFX_POPULATE_DWORD_1(reg, FRF_AZ_EVQ_RPTR, channel->eventq_read_ptr);
+	efx_writed_table(efx, &reg, efx->type->evq_rptr_tbl_base,
 			    channel->channel);
 }
 
@@ -704,11 +685,14 @@
 {
 	efx_oword_t drv_ev_reg;
 
-	EFX_POPULATE_OWORD_2(drv_ev_reg,
-			     DRV_EV_QID, channel->channel,
-			     DRV_EV_DATA,
-			     EFX_QWORD_FIELD64(*event, WHOLE_EVENT));
-	falcon_write(channel->efx, &drv_ev_reg, DRV_EV_REG_KER);
+	BUILD_BUG_ON(FRF_AZ_DRV_EV_DATA_LBN != 0 ||
+		     FRF_AZ_DRV_EV_DATA_WIDTH != 64);
+	drv_ev_reg.u32[0] = event->u32[0];
+	drv_ev_reg.u32[1] = event->u32[1];
+	drv_ev_reg.u32[2] = 0;
+	drv_ev_reg.u32[3] = 0;
+	EFX_SET_OWORD_FIELD(drv_ev_reg, FRF_AZ_DRV_EV_QID, channel->channel);
+	efx_writeo(channel->efx, &drv_ev_reg, FR_AZ_DRV_EV);
 }
 
 /* Handle a transmit completion event
@@ -724,18 +708,18 @@
 	struct efx_tx_queue *tx_queue;
 	struct efx_nic *efx = channel->efx;
 
-	if (likely(EFX_QWORD_FIELD(*event, TX_EV_COMP))) {
+	if (likely(EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_COMP))) {
 		/* Transmit completion */
-		tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, TX_EV_DESC_PTR);
-		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
+		tx_ev_desc_ptr = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_DESC_PTR);
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_Q_LABEL);
 		tx_queue = &efx->tx_queue[tx_ev_q_label];
 		channel->irq_mod_score +=
 			(tx_ev_desc_ptr - tx_queue->read_count) &
-			efx->type->txd_ring_mask;
+			EFX_TXQ_MASK;
 		efx_xmit_done(tx_queue, tx_ev_desc_ptr);
-	} else if (EFX_QWORD_FIELD(*event, TX_EV_WQ_FF_FULL)) {
+	} else if (EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_WQ_FF_FULL)) {
 		/* Rewrite the FIFO write pointer */
-		tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
+		tx_ev_q_label = EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_Q_LABEL);
 		tx_queue = &efx->tx_queue[tx_ev_q_label];
 
 		if (efx_dev_registered(efx))
@@ -743,7 +727,7 @@
 		falcon_notify_tx_desc(tx_queue);
 		if (efx_dev_registered(efx))
 			netif_tx_unlock(efx->net_dev);
-	} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
+	} else if (EFX_QWORD_FIELD(*event, FSF_AZ_TX_EV_PKT_ERR) &&
 		   EFX_WORKAROUND_10727(efx)) {
 		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
 	} else {
@@ -767,22 +751,22 @@
 	bool rx_ev_ip_frag_err, rx_ev_hdr_type, rx_ev_mcast_pkt;
 	unsigned rx_ev_pkt_type;
 
-	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
-	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
-	rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, RX_EV_TOBE_DISC);
-	rx_ev_pkt_type = EFX_QWORD_FIELD(*event, RX_EV_PKT_TYPE);
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_HDR_TYPE);
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_PKT);
+	rx_ev_tobe_disc = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_TOBE_DISC);
+	rx_ev_pkt_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PKT_TYPE);
 	rx_ev_buf_owner_id_err = EFX_QWORD_FIELD(*event,
-						 RX_EV_BUF_OWNER_ID_ERR);
-	rx_ev_ip_frag_err = EFX_QWORD_FIELD(*event, RX_EV_IF_FRAG_ERR);
+						 FSF_AZ_RX_EV_BUF_OWNER_ID_ERR);
+	rx_ev_ip_frag_err = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_IP_FRAG_ERR);
 	rx_ev_ip_hdr_chksum_err = EFX_QWORD_FIELD(*event,
-						  RX_EV_IP_HDR_CHKSUM_ERR);
+						  FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR);
 	rx_ev_tcp_udp_chksum_err = EFX_QWORD_FIELD(*event,
-						   RX_EV_TCP_UDP_CHKSUM_ERR);
-	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
-	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
+						   FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR);
+	rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_ETH_CRC_ERR);
+	rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_FRM_TRUNC);
 	rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
-			  0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
-	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
+			  0 : EFX_QWORD_FIELD(*event, FSF_AA_RX_EV_DRIB_NIB));
+	rx_ev_pause_frm = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PAUSE_FRM_ERR);
 
 	/* Every error apart from tobe_disc and pause_frm */
 	rx_ev_other_err = (rx_ev_drib_nib | rx_ev_tcp_udp_chksum_err |
@@ -838,9 +822,8 @@
 	struct efx_nic *efx = rx_queue->efx;
 	unsigned expected, dropped;
 
-	expected = rx_queue->removed_count & FALCON_RXD_RING_MASK;
-	dropped = ((index + FALCON_RXD_RING_SIZE - expected) &
-		   FALCON_RXD_RING_MASK);
+	expected = rx_queue->removed_count & EFX_RXQ_MASK;
+	dropped = (index - expected) & EFX_RXQ_MASK;
 	EFX_INFO(efx, "dropped %d events (index=%d expected=%d)\n",
 		dropped, index, expected);
 
@@ -866,17 +849,18 @@
 	struct efx_nic *efx = channel->efx;
 
 	/* Basic packet information */
-	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, RX_EV_BYTE_CNT);
-	rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, RX_EV_PKT_OK);
-	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, RX_EV_HDR_TYPE);
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_JUMBO_CONT));
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_SOP) != 1);
-	WARN_ON(EFX_QWORD_FIELD(*event, RX_EV_Q_LABEL) != channel->channel);
+	rx_ev_byte_cnt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_BYTE_CNT);
+	rx_ev_pkt_ok = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_PKT_OK);
+	rx_ev_hdr_type = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_HDR_TYPE);
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_JUMBO_CONT));
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_SOP) != 1);
+	WARN_ON(EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_Q_LABEL) !=
+		channel->channel);
 
 	rx_queue = &efx->rx_queue[channel->channel];
 
-	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, RX_EV_DESC_PTR);
-	expected_ptr = rx_queue->removed_count & FALCON_RXD_RING_MASK;
+	rx_ev_desc_ptr = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_DESC_PTR);
+	expected_ptr = rx_queue->removed_count & EFX_RXQ_MASK;
 	if (unlikely(rx_ev_desc_ptr != expected_ptr))
 		falcon_handle_rx_bad_index(rx_queue, rx_ev_desc_ptr);
 
@@ -884,7 +868,10 @@
 		/* If packet is marked as OK and packet type is TCP/IPv4 or
 		 * UDP/IPv4, then we can rely on the hardware checksum.
 		 */
-		checksummed = RX_EV_HDR_TYPE_HAS_CHECKSUMS(rx_ev_hdr_type);
+		checksummed =
+			efx->rx_checksum_enabled &&
+			(rx_ev_hdr_type == FSE_AB_RX_EV_HDR_TYPE_IPV4_TCP ||
+			 rx_ev_hdr_type == FSE_AB_RX_EV_HDR_TYPE_IPV4_UDP);
 	} else {
 		falcon_handle_rx_not_ok(rx_queue, event, &rx_ev_pkt_ok,
 					&discard);
@@ -892,10 +879,10 @@
 	}
 
 	/* Detect multicast packets that didn't match the filter */
-	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, RX_EV_MCAST_PKT);
+	rx_ev_mcast_pkt = EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_PKT);
 	if (rx_ev_mcast_pkt) {
 		unsigned int rx_ev_mcast_hash_match =
-			EFX_QWORD_FIELD(*event, RX_EV_MCAST_HASH_MATCH);
+			EFX_QWORD_FIELD(*event, FSF_AZ_RX_EV_MCAST_HASH_MATCH);
 
 		if (unlikely(!rx_ev_mcast_hash_match))
 			discard = true;
@@ -915,22 +902,23 @@
 	struct efx_nic *efx = channel->efx;
 	bool handled = false;
 
-	if (EFX_QWORD_FIELD(*event, G_PHY0_INTR) ||
-	    EFX_QWORD_FIELD(*event, G_PHY1_INTR) ||
-	    EFX_QWORD_FIELD(*event, XG_PHY_INTR) ||
-	    EFX_QWORD_FIELD(*event, XFP_PHY_INTR)) {
+	if (EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_G_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XG_PHY0_INTR) ||
+	    EFX_QWORD_FIELD(*event, FSF_AB_GLB_EV_XFP_PHY0_INTR)) {
 		efx->phy_op->clear_interrupt(efx);
 		queue_work(efx->workqueue, &efx->phy_work);
 		handled = true;
 	}
 
 	if ((falcon_rev(efx) >= FALCON_REV_B0) &&
-	    EFX_QWORD_FIELD(*event, XG_MNT_INTR_B0)) {
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_XG_MGT_INTR)) {
 		queue_work(efx->workqueue, &efx->mac_work);
 		handled = true;
 	}
 
-	if (EFX_QWORD_FIELD_VER(efx, *event, RX_RECOVERY)) {
+	if (falcon_rev(efx) <= FALCON_REV_A1 ?
+	    EFX_QWORD_FIELD(*event, FSF_AA_GLB_EV_RX_RECOVERY) :
+	    EFX_QWORD_FIELD(*event, FSF_BB_GLB_EV_RX_RECOVERY)) {
 		EFX_ERR(efx, "channel %d seen global RX_RESET "
 			"event. Resetting.\n", channel->channel);
 
@@ -953,35 +941,35 @@
 	unsigned int ev_sub_code;
 	unsigned int ev_sub_data;
 
-	ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
-	ev_sub_data = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_DATA);
+	ev_sub_code = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_SUBCODE);
+	ev_sub_data = EFX_QWORD_FIELD(*event, FSF_AZ_DRIVER_EV_SUBDATA);
 
 	switch (ev_sub_code) {
-	case TX_DESCQ_FLS_DONE_EV_DECODE:
+	case FSE_AZ_TX_DESCQ_FLS_DONE_EV:
 		EFX_TRACE(efx, "channel %d TXQ %d flushed\n",
 			  channel->channel, ev_sub_data);
 		break;
-	case RX_DESCQ_FLS_DONE_EV_DECODE:
+	case FSE_AZ_RX_DESCQ_FLS_DONE_EV:
 		EFX_TRACE(efx, "channel %d RXQ %d flushed\n",
 			  channel->channel, ev_sub_data);
 		break;
-	case EVQ_INIT_DONE_EV_DECODE:
+	case FSE_AZ_EVQ_INIT_DONE_EV:
 		EFX_LOG(efx, "channel %d EVQ %d initialised\n",
 			channel->channel, ev_sub_data);
 		break;
-	case SRM_UPD_DONE_EV_DECODE:
+	case FSE_AZ_SRM_UPD_DONE_EV:
 		EFX_TRACE(efx, "channel %d SRAM update done\n",
 			  channel->channel);
 		break;
-	case WAKE_UP_EV_DECODE:
+	case FSE_AZ_WAKE_UP_EV:
 		EFX_TRACE(efx, "channel %d RXQ %d wakeup event\n",
 			  channel->channel, ev_sub_data);
 		break;
-	case TIMER_EV_DECODE:
+	case FSE_AZ_TIMER_EV:
 		EFX_TRACE(efx, "channel %d RX queue %d timer expired\n",
 			  channel->channel, ev_sub_data);
 		break;
-	case RX_RECOVERY_EV_DECODE:
+	case FSE_AA_RX_RECOVER_EV:
 		EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. "
 			"Resetting.\n", channel->channel);
 		atomic_inc(&efx->rx_reset);
@@ -990,12 +978,12 @@
 				   RESET_TYPE_RX_RECOVERY :
 				   RESET_TYPE_DISABLE);
 		break;
-	case RX_DSC_ERROR_EV_DECODE:
+	case FSE_BZ_RX_DSC_ERROR_EV:
 		EFX_ERR(efx, "RX DMA Q %d reports descriptor fetch error."
 			" RX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
 		efx_schedule_reset(efx, RESET_TYPE_RX_DESC_FETCH);
 		break;
-	case TX_DSC_ERROR_EV_DECODE:
+	case FSE_BZ_TX_DSC_ERROR_EV:
 		EFX_ERR(efx, "TX DMA Q %d reports descriptor fetch error."
 			" TX Q %d is disabled.\n", ev_sub_data, ev_sub_data);
 		efx_schedule_reset(efx, RESET_TYPE_TX_DESC_FETCH);
@@ -1031,27 +1019,27 @@
 		/* Clear this event by marking it all ones */
 		EFX_SET_QWORD(*p_event);
 
-		ev_code = EFX_QWORD_FIELD(event, EV_CODE);
+		ev_code = EFX_QWORD_FIELD(event, FSF_AZ_EV_CODE);
 
 		switch (ev_code) {
-		case RX_IP_EV_DECODE:
+		case FSE_AZ_EV_CODE_RX_EV:
 			falcon_handle_rx_event(channel, &event);
 			++rx_packets;
 			break;
-		case TX_IP_EV_DECODE:
+		case FSE_AZ_EV_CODE_TX_EV:
 			falcon_handle_tx_event(channel, &event);
 			break;
-		case DRV_GEN_EV_DECODE:
-			channel->eventq_magic
-				= EFX_QWORD_FIELD(event, EVQ_MAGIC);
+		case FSE_AZ_EV_CODE_DRV_GEN_EV:
+			channel->eventq_magic = EFX_QWORD_FIELD(
+				event, FSF_AZ_DRV_GEN_EV_MAGIC);
 			EFX_LOG(channel->efx, "channel %d received generated "
 				"event "EFX_QWORD_FMT"\n", channel->channel,
 				EFX_QWORD_VAL(event));
 			break;
-		case GLOBAL_EV_DECODE:
+		case FSE_AZ_EV_CODE_GLOBAL_EV:
 			falcon_handle_global_event(channel, &event);
 			break;
-		case DRIVER_EV_DECODE:
+		case FSE_AZ_EV_CODE_DRIVER_EV:
 			falcon_handle_driver_event(channel, &event);
 			break;
 		default:
@@ -1061,7 +1049,7 @@
 		}
 
 		/* Increment read pointer */
-		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
+		read_ptr = (read_ptr + 1) & EFX_EVQ_MASK;
 
 	} while (rx_packets < rx_quota);
 
@@ -1076,26 +1064,20 @@
 
 	/* Set timer register */
 	if (channel->irq_moderation) {
-		/* Round to resolution supported by hardware.  The value we
-		 * program is based at 0.  So actual interrupt moderation
-		 * achieved is ((x + 1) * res).
-		 */
-		channel->irq_moderation -= (channel->irq_moderation %
-					    FALCON_IRQ_MOD_RESOLUTION);
-		if (channel->irq_moderation < FALCON_IRQ_MOD_RESOLUTION)
-			channel->irq_moderation = FALCON_IRQ_MOD_RESOLUTION;
 		EFX_POPULATE_DWORD_2(timer_cmd,
-				     TIMER_MODE, TIMER_MODE_INT_HLDOFF,
-				     TIMER_VAL,
-				     channel->irq_moderation /
-				     FALCON_IRQ_MOD_RESOLUTION - 1);
+				     FRF_AB_TC_TIMER_MODE,
+				     FFE_BB_TIMER_MODE_INT_HLDOFF,
+				     FRF_AB_TC_TIMER_VAL,
+				     channel->irq_moderation - 1);
 	} else {
 		EFX_POPULATE_DWORD_2(timer_cmd,
-				     TIMER_MODE, TIMER_MODE_DIS,
-				     TIMER_VAL, 0);
+				     FRF_AB_TC_TIMER_MODE,
+				     FFE_BB_TIMER_MODE_DIS,
+				     FRF_AB_TC_TIMER_VAL, 0);
 	}
-	falcon_writel_page_locked(efx, &timer_cmd, TIMER_CMD_REG_KER,
-				  channel->channel);
+	BUILD_BUG_ON(FR_AA_TIMER_COMMAND_KER != FR_BZ_TIMER_COMMAND_P0);
+	efx_writed_page_locked(efx, &timer_cmd, FR_BZ_TIMER_COMMAND_P0,
+			       channel->channel);
 
 }
 
@@ -1103,10 +1085,10 @@
 int falcon_probe_eventq(struct efx_channel *channel)
 {
 	struct efx_nic *efx = channel->efx;
-	unsigned int evq_size;
-
-	evq_size = FALCON_EVQ_SIZE * sizeof(efx_qword_t);
-	return falcon_alloc_special_buffer(efx, &channel->eventq, evq_size);
+	BUILD_BUG_ON(EFX_EVQ_SIZE < 512 || EFX_EVQ_SIZE > 32768 ||
+		     EFX_EVQ_SIZE & EFX_EVQ_MASK);
+	return falcon_alloc_special_buffer(efx, &channel->eventq,
+					   EFX_EVQ_SIZE * sizeof(efx_qword_t));
 }
 
 void falcon_init_eventq(struct efx_channel *channel)
@@ -1126,11 +1108,11 @@
 
 	/* Push event queue to card */
 	EFX_POPULATE_OWORD_3(evq_ptr,
-			     EVQ_EN, 1,
-			     EVQ_SIZE, FALCON_EVQ_ORDER,
-			     EVQ_BUF_BASE_ID, channel->eventq.index);
-	falcon_write_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base,
-			   channel->channel);
+			     FRF_AZ_EVQ_EN, 1,
+			     FRF_AZ_EVQ_SIZE, __ffs(channel->eventq.entries),
+			     FRF_AZ_EVQ_BUF_BASE_ID, channel->eventq.index);
+	efx_writeo_table(efx, &evq_ptr, efx->type->evq_ptr_tbl_base,
+			 channel->channel);
 
 	falcon_set_int_moderation(channel);
 }
@@ -1142,8 +1124,8 @@
 
 	/* Remove event queue from card */
 	EFX_ZERO_OWORD(eventq_ptr);
-	falcon_write_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base,
-			   channel->channel);
+	efx_writeo_table(efx, &eventq_ptr, efx->type->evq_ptr_tbl_base,
+			 channel->channel);
 
 	/* Unpin event queue */
 	falcon_fini_special_buffer(efx, &channel->eventq);
@@ -1164,9 +1146,9 @@
 {
 	efx_qword_t test_event;
 
-	EFX_POPULATE_QWORD_2(test_event,
-			     EV_CODE, DRV_GEN_EV_DECODE,
-			     EVQ_MAGIC, magic);
+	EFX_POPULATE_QWORD_2(test_event, FSF_AZ_EV_CODE,
+			     FSE_AZ_EV_CODE_DRV_GEN_EV,
+			     FSF_AZ_DRV_GEN_EV_MAGIC, magic);
 	falcon_generate_event(channel, &test_event);
 }
 
@@ -1174,11 +1156,12 @@
 {
 	efx_qword_t phy_event;
 
-	EFX_POPULATE_QWORD_1(phy_event, EV_CODE, GLOBAL_EV_DECODE);
+	EFX_POPULATE_QWORD_1(phy_event, FSF_AZ_EV_CODE,
+			     FSE_AZ_EV_CODE_GLOBAL_EV);
 	if (EFX_IS10G(efx))
-		EFX_SET_QWORD_FIELD(phy_event, XG_PHY_INTR, 1);
+		EFX_SET_QWORD_FIELD(phy_event, FSF_AB_GLB_EV_XG_PHY0_INTR, 1);
 	else
-		EFX_SET_QWORD_FIELD(phy_event, G_PHY0_INTR, 1);
+		EFX_SET_QWORD_FIELD(phy_event, FSF_AB_GLB_EV_G_PHY0_INTR, 1);
 
 	falcon_generate_event(&efx->channel[0], &phy_event);
 }
@@ -1196,7 +1179,7 @@
 	struct efx_tx_queue *tx_queue;
 	struct efx_rx_queue *rx_queue;
 	unsigned int read_ptr = channel->eventq_read_ptr;
-	unsigned int end_ptr = (read_ptr - 1) & FALCON_EVQ_MASK;
+	unsigned int end_ptr = (read_ptr - 1) & EFX_EVQ_MASK;
 
 	do {
 		efx_qword_t *event = falcon_event(channel, read_ptr);
@@ -1206,22 +1189,23 @@
 		if (!falcon_event_present(event))
 			break;
 
-		ev_code = EFX_QWORD_FIELD(*event, EV_CODE);
-		ev_sub_code = EFX_QWORD_FIELD(*event, DRIVER_EV_SUB_CODE);
-		if (ev_code == DRIVER_EV_DECODE &&
-		    ev_sub_code == TX_DESCQ_FLS_DONE_EV_DECODE) {
+		ev_code = EFX_QWORD_FIELD(*event, FSF_AZ_EV_CODE);
+		ev_sub_code = EFX_QWORD_FIELD(*event,
+					      FSF_AZ_DRIVER_EV_SUBCODE);
+		if (ev_code == FSE_AZ_EV_CODE_DRIVER_EV &&
+		    ev_sub_code == FSE_AZ_TX_DESCQ_FLS_DONE_EV) {
 			ev_queue = EFX_QWORD_FIELD(*event,
-						   DRIVER_EV_TX_DESCQ_ID);
+						   FSF_AZ_DRIVER_EV_SUBDATA);
 			if (ev_queue < EFX_TX_QUEUE_COUNT) {
 				tx_queue = efx->tx_queue + ev_queue;
 				tx_queue->flushed = true;
 			}
-		} else if (ev_code == DRIVER_EV_DECODE &&
-			   ev_sub_code == RX_DESCQ_FLS_DONE_EV_DECODE) {
-			ev_queue = EFX_QWORD_FIELD(*event,
-						   DRIVER_EV_RX_DESCQ_ID);
-			ev_failed = EFX_QWORD_FIELD(*event,
-						    DRIVER_EV_RX_FLUSH_FAIL);
+		} else if (ev_code == FSE_AZ_EV_CODE_DRIVER_EV &&
+			   ev_sub_code == FSE_AZ_RX_DESCQ_FLS_DONE_EV) {
+			ev_queue = EFX_QWORD_FIELD(
+				*event, FSF_AZ_DRIVER_EV_RX_DESCQ_ID);
+			ev_failed = EFX_QWORD_FIELD(
+				*event, FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL);
 			if (ev_queue < efx->n_rx_queues) {
 				rx_queue = efx->rx_queue + ev_queue;
 
@@ -1233,7 +1217,7 @@
 			}
 		}
 
-		read_ptr = (read_ptr + 1) & FALCON_EVQ_MASK;
+		read_ptr = (read_ptr + 1) & EFX_EVQ_MASK;
 	} while (read_ptr != end_ptr);
 }
 
@@ -1311,9 +1295,9 @@
 	efx_oword_t int_en_reg_ker;
 
 	EFX_POPULATE_OWORD_2(int_en_reg_ker,
-			     KER_INT_KER, force,
-			     DRV_INT_EN_KER, enabled);
-	falcon_write(efx, &int_en_reg_ker, INT_EN_REG_KER);
+			     FRF_AZ_KER_INT_KER, force,
+			     FRF_AZ_DRV_INT_EN_KER, enabled);
+	efx_writeo(efx, &int_en_reg_ker, FR_AZ_INT_EN_KER);
 }
 
 void falcon_enable_interrupts(struct efx_nic *efx)
@@ -1326,9 +1310,10 @@
 
 	/* Program address */
 	EFX_POPULATE_OWORD_2(int_adr_reg_ker,
-			     NORM_INT_VEC_DIS_KER, EFX_INT_MODE_USE_MSI(efx),
-			     INT_ADR_KER, efx->irq_status.dma_addr);
-	falcon_write(efx, &int_adr_reg_ker, INT_ADR_REG_KER);
+			     FRF_AZ_NORM_INT_VEC_DIS_KER,
+			     EFX_INT_MODE_USE_MSI(efx),
+			     FRF_AZ_INT_ADR_KER, efx->irq_status.dma_addr);
+	efx_writeo(efx, &int_adr_reg_ker, FR_AZ_INT_ADR_KER);
 
 	/* Enable interrupts */
 	falcon_interrupts(efx, 1, 0);
@@ -1368,9 +1353,9 @@
 {
 	efx_dword_t reg;
 
-	EFX_POPULATE_DWORD_1(reg, INT_ACK_DUMMY_DATA, 0xb7eb7e);
-	falcon_writel(efx, &reg, INT_ACK_REG_KER_A1);
-	falcon_readl(efx, &reg, WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1);
+	EFX_POPULATE_DWORD_1(reg, FRF_AA_INT_ACK_KER_FIELD, 0xb7eb7e);
+	efx_writed(efx, &reg, FR_AA_INT_ACK_KER);
+	efx_readd(efx, &reg, FR_AA_WORK_AROUND_BROKEN_PCI_READS);
 }
 
 /* Process a fatal interrupt
@@ -1383,8 +1368,8 @@
 	efx_oword_t fatal_intr;
 	int error, mem_perr;
 
-	falcon_read(efx, &fatal_intr, FATAL_INTR_REG_KER);
-	error = EFX_OWORD_FIELD(fatal_intr, INT_KER_ERROR);
+	efx_reado(efx, &fatal_intr, FR_AZ_FATAL_INTR_KER);
+	error = EFX_OWORD_FIELD(fatal_intr, FRF_AZ_FATAL_INTR);
 
 	EFX_ERR(efx, "SYSTEM ERROR " EFX_OWORD_FMT " status "
 		EFX_OWORD_FMT ": %s\n", EFX_OWORD_VAL(*int_ker),
@@ -1394,10 +1379,10 @@
 		goto out;
 
 	/* If this is a memory parity error dump which blocks are offending */
-	mem_perr = EFX_OWORD_FIELD(fatal_intr, MEM_PERR_INT_KER);
+	mem_perr = EFX_OWORD_FIELD(fatal_intr, FRF_AZ_MEM_PERR_INT_KER);
 	if (mem_perr) {
 		efx_oword_t reg;
-		falcon_read(efx, &reg, MEM_STAT_REG_KER);
+		efx_reado(efx, &reg, FR_AZ_MEM_STAT);
 		EFX_ERR(efx, "SYSTEM ERROR: memory parity error "
 			EFX_OWORD_FMT "\n", EFX_OWORD_VAL(reg));
 	}
@@ -1409,13 +1394,13 @@
 	falcon_disable_interrupts(efx);
 
 	/* Count errors and reset or disable the NIC accordingly */
-	if (nic_data->int_error_count == 0 ||
-	    time_after(jiffies, nic_data->int_error_expire)) {
-		nic_data->int_error_count = 0;
-		nic_data->int_error_expire =
+	if (efx->int_error_count == 0 ||
+	    time_after(jiffies, efx->int_error_expire)) {
+		efx->int_error_count = 0;
+		efx->int_error_expire =
 			jiffies + FALCON_INT_ERROR_EXPIRE * HZ;
 	}
-	if (++nic_data->int_error_count < FALCON_MAX_INT_ERRORS) {
+	if (++efx->int_error_count < FALCON_MAX_INT_ERRORS) {
 		EFX_ERR(efx, "SYSTEM ERROR - reset scheduled\n");
 		efx_schedule_reset(efx, RESET_TYPE_INT_ERROR);
 	} else {
@@ -1441,11 +1426,11 @@
 	int syserr;
 
 	/* Read the ISR which also ACKs the interrupts */
-	falcon_readl(efx, &reg, INT_ISR0_B0);
+	efx_readd(efx, &reg, FR_BZ_INT_ISR0);
 	queues = EFX_EXTRACT_DWORD(reg, 0, 31);
 
 	/* Check to see if we have a serious error condition */
-	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT);
 	if (unlikely(syserr))
 		return falcon_fatal_interrupt(efx);
 
@@ -1491,7 +1476,7 @@
 		  irq, raw_smp_processor_id(), EFX_OWORD_VAL(*int_ker));
 
 	/* Check to see if we have a serious error condition */
-	syserr = EFX_OWORD_FIELD(*int_ker, FATAL_INT);
+	syserr = EFX_OWORD_FIELD(*int_ker, FSF_AZ_NET_IVEC_FATAL_INT);
 	if (unlikely(syserr))
 		return falcon_fatal_interrupt(efx);
 
@@ -1558,12 +1543,12 @@
 	if (falcon_rev(efx) < FALCON_REV_B0)
 		return;
 
-	for (offset = RX_RSS_INDIR_TBL_B0;
-	     offset < RX_RSS_INDIR_TBL_B0 + 0x800;
+	for (offset = FR_BZ_RX_INDIRECTION_TBL;
+	     offset < FR_BZ_RX_INDIRECTION_TBL + 0x800;
 	     offset += 0x10) {
-		EFX_POPULATE_DWORD_1(dword, RX_RSS_INDIR_ENT_B0,
+		EFX_POPULATE_DWORD_1(dword, FRF_BZ_IT_QUEUE,
 				     i % efx->n_rx_queues);
-		falcon_writel(efx, &dword, offset);
+		efx_writed(efx, &dword, offset);
 		i++;
 	}
 }
@@ -1626,7 +1611,7 @@
 
 	/* ACK legacy interrupt */
 	if (falcon_rev(efx) >= FALCON_REV_B0)
-		falcon_read(efx, &reg, INT_ISR0_B0);
+		efx_reado(efx, &reg, FR_BZ_INT_ISR0);
 	else
 		falcon_irq_ack_a1(efx);
 
@@ -1647,8 +1632,8 @@
 static int falcon_spi_poll(struct efx_nic *efx)
 {
 	efx_oword_t reg;
-	falcon_read(efx, &reg, EE_SPI_HCMD_REG_KER);
-	return EFX_OWORD_FIELD(reg, EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0;
+	efx_reado(efx, &reg, FR_AB_EE_SPI_HCMD);
+	return EFX_OWORD_FIELD(reg, FRF_AB_EE_SPI_HCMD_CMD_EN) ? -EBUSY : 0;
 }
 
 /* Wait for SPI command completion */
@@ -1700,27 +1685,27 @@
 
 	/* Program address register, if we have an address */
 	if (addressed) {
-		EFX_POPULATE_OWORD_1(reg, EE_SPI_HADR_ADR, address);
-		falcon_write(efx, &reg, EE_SPI_HADR_REG_KER);
+		EFX_POPULATE_OWORD_1(reg, FRF_AB_EE_SPI_HADR_ADR, address);
+		efx_writeo(efx, &reg, FR_AB_EE_SPI_HADR);
 	}
 
 	/* Program data register, if we have data */
 	if (in != NULL) {
 		memcpy(&reg, in, len);
-		falcon_write(efx, &reg, EE_SPI_HDATA_REG_KER);
+		efx_writeo(efx, &reg, FR_AB_EE_SPI_HDATA);
 	}
 
 	/* Issue read/write command */
 	EFX_POPULATE_OWORD_7(reg,
-			     EE_SPI_HCMD_CMD_EN, 1,
-			     EE_SPI_HCMD_SF_SEL, spi->device_id,
-			     EE_SPI_HCMD_DABCNT, len,
-			     EE_SPI_HCMD_READ, reading,
-			     EE_SPI_HCMD_DUBCNT, 0,
-			     EE_SPI_HCMD_ADBCNT,
+			     FRF_AB_EE_SPI_HCMD_CMD_EN, 1,
+			     FRF_AB_EE_SPI_HCMD_SF_SEL, spi->device_id,
+			     FRF_AB_EE_SPI_HCMD_DABCNT, len,
+			     FRF_AB_EE_SPI_HCMD_READ, reading,
+			     FRF_AB_EE_SPI_HCMD_DUBCNT, 0,
+			     FRF_AB_EE_SPI_HCMD_ADBCNT,
 			     (addressed ? spi->addr_len : 0),
-			     EE_SPI_HCMD_ENC, command);
-	falcon_write(efx, &reg, EE_SPI_HCMD_REG_KER);
+			     FRF_AB_EE_SPI_HCMD_ENC, command);
+	efx_writeo(efx, &reg, FR_AB_EE_SPI_HCMD);
 
 	/* Wait for read/write to complete */
 	rc = falcon_spi_wait(efx);
@@ -1729,7 +1714,7 @@
 
 	/* Read data */
 	if (out != NULL) {
-		falcon_read(efx, &reg, EE_SPI_HDATA_REG_KER);
+		efx_reado(efx, &reg, FR_AB_EE_SPI_HDATA);
 		memcpy(out, &reg, len);
 	}
 
@@ -1870,21 +1855,22 @@
 		 * macs, so instead use the internal MAC resets
 		 */
 		if (!EFX_IS10G(efx)) {
-			EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 1);
-			falcon_write(efx, &reg, GM_CFG1_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 1);
+			efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 			udelay(1000);
 
-			EFX_POPULATE_OWORD_1(reg, GM_SW_RST, 0);
-			falcon_write(efx, &reg, GM_CFG1_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_SW_RST, 0);
+			efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 			udelay(1000);
 			return 0;
 		} else {
-			EFX_POPULATE_OWORD_1(reg, XM_CORE_RST, 1);
-			falcon_write(efx, &reg, XM_GLB_CFG_REG);
+			EFX_POPULATE_OWORD_1(reg, FRF_AB_XM_CORE_RST, 1);
+			efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG);
 
 			for (count = 0; count < 10000; count++) {
-				falcon_read(efx, &reg, XM_GLB_CFG_REG);
-				if (EFX_OWORD_FIELD(reg, XM_CORE_RST) == 0)
+				efx_reado(efx, &reg, FR_AB_XM_GLB_CFG);
+				if (EFX_OWORD_FIELD(reg, FRF_AB_XM_CORE_RST) ==
+				    0)
 					return 0;
 				udelay(10);
 			}
@@ -1898,22 +1884,22 @@
 	 * the drain sequence with the statistics fetch */
 	efx_stats_disable(efx);
 
-	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, 1);
-	falcon_write(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_MAC_CTRL);
+	EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN, 1);
+	efx_writeo(efx, &reg, FR_AB_MAC_CTRL);
 
-	falcon_read(efx, &reg, GLB_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, RST_XGTX, 1);
-	EFX_SET_OWORD_FIELD(reg, RST_XGRX, 1);
-	EFX_SET_OWORD_FIELD(reg, RST_EM, 1);
-	falcon_write(efx, &reg, GLB_CTL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_GLB_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGTX, 1);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_XGRX, 1);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_RST_EM, 1);
+	efx_writeo(efx, &reg, FR_AB_GLB_CTL);
 
 	count = 0;
 	while (1) {
-		falcon_read(efx, &reg, GLB_CTL_REG_KER);
-		if (!EFX_OWORD_FIELD(reg, RST_XGTX) &&
-		    !EFX_OWORD_FIELD(reg, RST_XGRX) &&
-		    !EFX_OWORD_FIELD(reg, RST_EM)) {
+		efx_reado(efx, &reg, FR_AB_GLB_CTL);
+		if (!EFX_OWORD_FIELD(reg, FRF_AB_RST_XGTX) &&
+		    !EFX_OWORD_FIELD(reg, FRF_AB_RST_XGRX) &&
+		    !EFX_OWORD_FIELD(reg, FRF_AB_RST_EM)) {
 			EFX_LOG(efx, "Completed MAC reset after %d loops\n",
 				count);
 			break;
@@ -1944,9 +1930,9 @@
 	    (efx->loopback_mode != LOOPBACK_NONE))
 		return;
 
-	falcon_read(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_reado(efx, &reg, FR_AB_MAC_CTRL);
 	/* There is no point in draining more than once */
-	if (EFX_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0))
+	if (EFX_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN))
 		return;
 
 	falcon_reset_macs(efx);
@@ -1960,9 +1946,9 @@
 		return;
 
 	/* Isolate the MAC -> RX */
-	falcon_read(efx, &reg, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 0);
-	falcon_write(efx, &reg, RX_CFG_REG_KER);
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 0);
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
 
 	if (!efx->link_up)
 		falcon_drain_tx_fifo(efx);
@@ -1985,19 +1971,19 @@
 	 * indefinitely held and TX queue can be flushed at any point
 	 * while the link is down. */
 	EFX_POPULATE_OWORD_5(reg,
-			     MAC_XOFF_VAL, 0xffff /* max pause time */,
-			     MAC_BCAD_ACPT, 1,
-			     MAC_UC_PROM, efx->promiscuous,
-			     MAC_LINK_STATUS, 1, /* always set */
-			     MAC_SPEED, link_speed);
+			     FRF_AB_MAC_XOFF_VAL, 0xffff /* max pause time */,
+			     FRF_AB_MAC_BCAD_ACPT, 1,
+			     FRF_AB_MAC_UC_PROM, efx->promiscuous,
+			     FRF_AB_MAC_LINK_STATUS, 1, /* always set */
+			     FRF_AB_MAC_SPEED, link_speed);
 	/* On B0, MAC backpressure can be disabled and packets get
 	 * discarded. */
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
+		EFX_SET_OWORD_FIELD(reg, FRF_BB_TXFIFO_DRAIN_EN,
 				    !efx->link_up);
 	}
 
-	falcon_write(efx, &reg, MAC0_CTRL_REG_KER);
+	efx_writeo(efx, &reg, FR_AB_MAC_CTRL);
 
 	/* Restore the multicast hash registers. */
 	falcon_set_multicast_hash(efx);
@@ -2006,13 +1992,13 @@
 	 * covered by RX_XOFF_MAC_EN and XM_TX_CFG_REG:XM_FCNTL.
 	 * Action on receipt of pause frames is controller by XM_DIS_FCNTL */
 	tx_fc = !!(efx->link_fc & EFX_FC_TX);
-	falcon_read(efx, &reg, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	EFX_SET_OWORD_FIELD(reg, FRF_AZ_RX_XOFF_MAC_EN, tx_fc);
 
 	/* Unisolate the MAC -> RX */
 	if (falcon_rev(efx) >= FALCON_REV_B0)
-		EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
-	falcon_write(efx, &reg, RX_CFG_REG_KER);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
 }
 
 int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset)
@@ -2027,8 +2013,8 @@
 	/* Statistics fetch will fail if the MAC is in TX drain */
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
 		efx_oword_t temp;
-		falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
-		if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
+		efx_reado(efx, &temp, FR_AB_MAC_CTRL);
+		if (EFX_OWORD_FIELD(temp, FRF_BB_TXFIFO_DRAIN_EN))
 			return 0;
 	}
 
@@ -2038,10 +2024,10 @@
 
 	/* Initiate DMA transfer of stats */
 	EFX_POPULATE_OWORD_2(reg,
-			     MAC_STAT_DMA_CMD, 1,
-			     MAC_STAT_DMA_ADR,
+			     FRF_AB_MAC_STAT_DMA_CMD, 1,
+			     FRF_AB_MAC_STAT_DMA_ADR,
 			     efx->stats_buffer.dma_addr);
-	falcon_write(efx, &reg, MAC0_STAT_DMA_REG_KER);
+	efx_writeo(efx, &reg, FR_AB_MAC_STAT_DMA);
 
 	/* Wait for transfer to complete */
 	for (i = 0; i < 400; i++) {
@@ -2071,10 +2057,10 @@
 
 	/* wait upto 50ms - taken max from datasheet */
 	for (count = 0; count < 5000; count++) {
-		falcon_readl(efx, &md_stat, MD_STAT_REG_KER);
-		if (EFX_DWORD_FIELD(md_stat, MD_BSY) == 0) {
-			if (EFX_DWORD_FIELD(md_stat, MD_LNFL) != 0 ||
-			    EFX_DWORD_FIELD(md_stat, MD_BSERR) != 0) {
+		efx_readd(efx, &md_stat, FR_AB_MD_STAT);
+		if (EFX_DWORD_FIELD(md_stat, FRF_AB_MD_BSY) == 0) {
+			if (EFX_DWORD_FIELD(md_stat, FRF_AB_MD_LNFL) != 0 ||
+			    EFX_DWORD_FIELD(md_stat, FRF_AB_MD_BSERR) != 0) {
 				EFX_ERR(efx, "error from GMII access "
 					EFX_DWORD_FMT"\n",
 					EFX_DWORD_VAL(md_stat));
@@ -2107,29 +2093,30 @@
 		goto out;
 
 	/* Write the address/ID register */
-	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
-	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr);
+	efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR);
 
-	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
-	falcon_write(efx, &reg, MD_ID_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad,
+			     FRF_AB_MD_DEV_ADR, devad);
+	efx_writeo(efx, &reg, FR_AB_MD_ID);
 
 	/* Write data */
-	EFX_POPULATE_OWORD_1(reg, MD_TXD, value);
-	falcon_write(efx, &reg, MD_TXD_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_TXD, value);
+	efx_writeo(efx, &reg, FR_AB_MD_TXD);
 
 	EFX_POPULATE_OWORD_2(reg,
-			     MD_WRC, 1,
-			     MD_GC, 0);
-	falcon_write(efx, &reg, MD_CS_REG_KER);
+			     FRF_AB_MD_WRC, 1,
+			     FRF_AB_MD_GC, 0);
+	efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 	/* Wait for data to be written */
 	rc = falcon_gmii_wait(efx);
 	if (rc) {
 		/* Abort the write operation */
 		EFX_POPULATE_OWORD_2(reg,
-				     MD_WRC, 0,
-				     MD_GC, 1);
-		falcon_write(efx, &reg, MD_CS_REG_KER);
+				     FRF_AB_MD_WRC, 0,
+				     FRF_AB_MD_GC, 1);
+		efx_writeo(efx, &reg, FR_AB_MD_CS);
 		udelay(10);
 	}
 
@@ -2153,29 +2140,30 @@
 	if (rc)
 		goto out;
 
-	EFX_POPULATE_OWORD_1(reg, MD_PHY_ADR, addr);
-	falcon_write(efx, &reg, MD_PHY_ADR_REG_KER);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_MD_PHY_ADR, addr);
+	efx_writeo(efx, &reg, FR_AB_MD_PHY_ADR);
 
-	EFX_POPULATE_OWORD_2(reg, MD_PRT_ADR, prtad, MD_DEV_ADR, devad);
-	falcon_write(efx, &reg, MD_ID_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_PRT_ADR, prtad,
+			     FRF_AB_MD_DEV_ADR, devad);
+	efx_writeo(efx, &reg, FR_AB_MD_ID);
 
 	/* Request data to be read */
-	EFX_POPULATE_OWORD_2(reg, MD_RDC, 1, MD_GC, 0);
-	falcon_write(efx, &reg, MD_CS_REG_KER);
+	EFX_POPULATE_OWORD_2(reg, FRF_AB_MD_RDC, 1, FRF_AB_MD_GC, 0);
+	efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 	/* Wait for data to become available */
 	rc = falcon_gmii_wait(efx);
 	if (rc == 0) {
-		falcon_read(efx, &reg, MD_RXD_REG_KER);
-		rc = EFX_OWORD_FIELD(reg, MD_RXD);
+		efx_reado(efx, &reg, FR_AB_MD_RXD);
+		rc = EFX_OWORD_FIELD(reg, FRF_AB_MD_RXD);
 		EFX_REGDUMP(efx, "read from MDIO %d register %d.%d, got %04x\n",
 			    prtad, devad, addr, rc);
 	} else {
 		/* Abort the read operation */
 		EFX_POPULATE_OWORD_2(reg,
-				     MD_RIC, 0,
-				     MD_GC, 1);
-		falcon_write(efx, &reg, MD_CS_REG_KER);
+				     FRF_AB_MD_RIC, 0,
+				     FRF_AB_MD_GC, 1);
+		efx_writeo(efx, &reg, FR_AB_MD_CS);
 
 		EFX_LOG(efx, "read from MDIO %d register %d.%d, got error %d\n",
 			prtad, devad, addr, rc);
@@ -2186,37 +2174,6 @@
 	return rc;
 }
 
-static int falcon_probe_phy(struct efx_nic *efx)
-{
-	switch (efx->phy_type) {
-	case PHY_TYPE_SFX7101:
-		efx->phy_op = &falcon_sfx7101_phy_ops;
-		break;
-	case PHY_TYPE_SFT9001A:
-	case PHY_TYPE_SFT9001B:
-		efx->phy_op = &falcon_sft9001_phy_ops;
-		break;
-	case PHY_TYPE_QT2022C2:
-	case PHY_TYPE_QT2025C:
-		efx->phy_op = &falcon_xfp_phy_ops;
-		break;
-	default:
-		EFX_ERR(efx, "Unknown PHY type %d\n",
-			efx->phy_type);
-		return -1;
-	}
-
-	if (efx->phy_op->macs & EFX_XMAC)
-		efx->loopback_modes |= ((1 << LOOPBACK_XGMII) |
-					(1 << LOOPBACK_XGXS) |
-					(1 << LOOPBACK_XAUI));
-	if (efx->phy_op->macs & EFX_GMAC)
-		efx->loopback_modes |= (1 << LOOPBACK_GMAC);
-	efx->loopback_modes |= efx->phy_op->loopbacks;
-
-	return 0;
-}
-
 int falcon_switch_mac(struct efx_nic *efx)
 {
 	struct efx_mac_operations *old_mac_op = efx->mac_op;
@@ -2242,16 +2199,17 @@
 
 	/* Always push the NIC_STAT_REG setting even if the mac hasn't
 	 * changed, because this function is run post online reset */
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
+	efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
 	strap_val = EFX_IS10G(efx) ? 5 : 3;
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_EN, 1);
-		EFX_SET_OWORD_FIELD(nic_stat, EE_STRAP_OVR, strap_val);
-		falcon_write(efx, &nic_stat, NIC_STAT_REG);
+		EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP_EN, 1);
+		EFX_SET_OWORD_FIELD(nic_stat, FRF_BB_EE_STRAP, strap_val);
+		efx_writeo(efx, &nic_stat, FR_AB_NIC_STAT);
 	} else {
 		/* Falcon A1 does not support 1G/10G speed switching
 		 * and must not be used with a PHY that does. */
-		BUG_ON(EFX_OWORD_FIELD(nic_stat, STRAP_PINS) != strap_val);
+		BUG_ON(EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_PINS) !=
+		       strap_val);
 	}
 
 	if (old_mac_op == efx->mac_op)
@@ -2272,10 +2230,31 @@
 {
 	int rc;
 
-	/* Hook in PHY operations table */
-	rc = falcon_probe_phy(efx);
-	if (rc)
-		return rc;
+	switch (efx->phy_type) {
+	case PHY_TYPE_SFX7101:
+		efx->phy_op = &falcon_sfx7101_phy_ops;
+		break;
+	case PHY_TYPE_SFT9001A:
+	case PHY_TYPE_SFT9001B:
+		efx->phy_op = &falcon_sft9001_phy_ops;
+		break;
+	case PHY_TYPE_QT2022C2:
+	case PHY_TYPE_QT2025C:
+		efx->phy_op = &falcon_qt202x_phy_ops;
+		break;
+	default:
+		EFX_ERR(efx, "Unknown PHY type %d\n",
+			efx->phy_type);
+		return -ENODEV;
+	}
+
+	if (efx->phy_op->macs & EFX_XMAC)
+		efx->loopback_modes |= ((1 << LOOPBACK_XGMII) |
+					(1 << LOOPBACK_XGXS) |
+					(1 << LOOPBACK_XAUI));
+	if (efx->phy_op->macs & EFX_GMAC)
+		efx->loopback_modes |= (1 << LOOPBACK_GMAC);
+	efx->loopback_modes |= efx->phy_op->loopbacks;
 
 	/* Set up MDIO structure for PHY */
 	efx->mdio.mmds = efx->phy_op->mmds;
@@ -2324,8 +2303,8 @@
 	 */
 	set_bit_le(0xff, mc_hash->byte);
 
-	falcon_write(efx, &mc_hash->oword[0], MAC_MCAST_HASH_REG0_KER);
-	falcon_write(efx, &mc_hash->oword[1], MAC_MCAST_HASH_REG1_KER);
+	efx_writeo(efx, &mc_hash->oword[0], FR_AB_MAC_MC_HASH_REG0);
+	efx_writeo(efx, &mc_hash->oword[1], FR_AB_MAC_MC_HASH_REG1);
 }
 
 
@@ -2351,7 +2330,7 @@
 	region = kmalloc(FALCON_NVCONFIG_END, GFP_KERNEL);
 	if (!region)
 		return -ENOMEM;
-	nvconfig = region + NVCONFIG_OFFSET;
+	nvconfig = region + FALCON_NVCONFIG_OFFSET;
 
 	mutex_lock(&efx->spi_lock);
 	rc = falcon_spi_read(spi, 0, FALCON_NVCONFIG_END, NULL, region);
@@ -2367,7 +2346,7 @@
 	struct_ver = le16_to_cpu(nvconfig->board_struct_ver);
 
 	rc = -EINVAL;
-	if (magic_num != NVCONFIG_BOARD_MAGIC_NUM) {
+	if (magic_num != FALCON_NVCONFIG_BOARD_MAGIC_NUM) {
 		EFX_ERR(efx, "NVRAM bad magic 0x%x\n", magic_num);
 		goto out;
 	}
@@ -2403,41 +2382,41 @@
 	unsigned address;
 	efx_oword_t mask;
 } efx_test_registers[] = {
-	{ ADR_REGION_REG_KER,
+	{ FR_AZ_ADR_REGION,
 	  EFX_OWORD32(0x0001FFFF, 0x0001FFFF, 0x0001FFFF, 0x0001FFFF) },
-	{ RX_CFG_REG_KER,
+	{ FR_AZ_RX_CFG,
 	  EFX_OWORD32(0xFFFFFFFE, 0x00017FFF, 0x00000000, 0x00000000) },
-	{ TX_CFG_REG_KER,
+	{ FR_AZ_TX_CFG,
 	  EFX_OWORD32(0x7FFF0037, 0x00000000, 0x00000000, 0x00000000) },
-	{ TX_CFG2_REG_KER,
+	{ FR_AZ_TX_RESERVED,
 	  EFX_OWORD32(0xFFFEFE80, 0x1FFFFFFF, 0x020000FE, 0x007FFFFF) },
-	{ MAC0_CTRL_REG_KER,
+	{ FR_AB_MAC_CTRL,
 	  EFX_OWORD32(0xFFFF0000, 0x00000000, 0x00000000, 0x00000000) },
-	{ SRM_TX_DC_CFG_REG_KER,
+	{ FR_AZ_SRM_TX_DC_CFG,
 	  EFX_OWORD32(0x001FFFFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ RX_DC_CFG_REG_KER,
+	{ FR_AZ_RX_DC_CFG,
 	  EFX_OWORD32(0x0000000F, 0x00000000, 0x00000000, 0x00000000) },
-	{ RX_DC_PF_WM_REG_KER,
+	{ FR_AZ_RX_DC_PF_WM,
 	  EFX_OWORD32(0x000003FF, 0x00000000, 0x00000000, 0x00000000) },
-	{ DP_CTRL_REG,
+	{ FR_BZ_DP_CTRL,
 	  EFX_OWORD32(0x00000FFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ GM_CFG2_REG,
+	{ FR_AB_GM_CFG2,
 	  EFX_OWORD32(0x00007337, 0x00000000, 0x00000000, 0x00000000) },
-	{ GMF_CFG0_REG,
+	{ FR_AB_GMF_CFG0,
 	  EFX_OWORD32(0x00001F1F, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_GLB_CFG_REG,
+	{ FR_AB_XM_GLB_CFG,
 	  EFX_OWORD32(0x00000C68, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_TX_CFG_REG,
+	{ FR_AB_XM_TX_CFG,
 	  EFX_OWORD32(0x00080164, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_RX_CFG_REG,
+	{ FR_AB_XM_RX_CFG,
 	  EFX_OWORD32(0x07100A0C, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_RX_PARAM_REG,
+	{ FR_AB_XM_RX_PARAM,
 	  EFX_OWORD32(0x00001FF8, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_FC_REG,
+	{ FR_AB_XM_FC,
 	  EFX_OWORD32(0xFFFF0001, 0x00000000, 0x00000000, 0x00000000) },
-	{ XM_ADR_LO_REG,
+	{ FR_AB_XM_ADR_LO,
 	  EFX_OWORD32(0xFFFFFFFF, 0x00000000, 0x00000000, 0x00000000) },
-	{ XX_SD_CTL_REG,
+	{ FR_AB_XX_SD_CTL,
 	  EFX_OWORD32(0x0003FF0F, 0x00000000, 0x00000000, 0x00000000) },
 };
 
@@ -2461,7 +2440,7 @@
 		mask = imask = efx_test_registers[i].mask;
 		EFX_INVERT_OWORD(imask);
 
-		falcon_read(efx, &original, address);
+		efx_reado(efx, &original, address);
 
 		/* bit sweep on and off */
 		for (j = 0; j < 128; j++) {
@@ -2472,8 +2451,8 @@
 			EFX_AND_OWORD(reg, original, mask);
 			EFX_SET_OWORD32(reg, j, j, 1);
 
-			falcon_write(efx, &reg, address);
-			falcon_read(efx, &buf, address);
+			efx_writeo(efx, &reg, address);
+			efx_reado(efx, &buf, address);
 
 			if (efx_masked_compare_oword(&reg, &buf, &mask))
 				goto fail;
@@ -2482,14 +2461,14 @@
 			EFX_OR_OWORD(reg, original, mask);
 			EFX_SET_OWORD32(reg, j, j, 0);
 
-			falcon_write(efx, &reg, address);
-			falcon_read(efx, &buf, address);
+			efx_writeo(efx, &reg, address);
+			efx_reado(efx, &buf, address);
 
 			if (efx_masked_compare_oword(&reg, &buf, &mask))
 				goto fail;
 		}
 
-		falcon_write(efx, &original, address);
+		efx_writeo(efx, &original, address);
 	}
 
 	return 0;
@@ -2537,22 +2516,24 @@
 		}
 
 		EFX_POPULATE_OWORD_2(glb_ctl_reg_ker,
-				     EXT_PHY_RST_DUR, 0x7,
-				     SWRST, 1);
+				     FRF_AB_EXT_PHY_RST_DUR,
+				     FFE_AB_EXT_PHY_RST_DUR_10240US,
+				     FRF_AB_SWRST, 1);
 	} else {
-		int reset_phy = (method == RESET_TYPE_INVISIBLE ?
-				 EXCLUDE_FROM_RESET : 0);
-
 		EFX_POPULATE_OWORD_7(glb_ctl_reg_ker,
-				     EXT_PHY_RST_CTL, reset_phy,
-				     PCIE_CORE_RST_CTL, EXCLUDE_FROM_RESET,
-				     PCIE_NSTCK_RST_CTL, EXCLUDE_FROM_RESET,
-				     PCIE_SD_RST_CTL, EXCLUDE_FROM_RESET,
-				     EE_RST_CTL, EXCLUDE_FROM_RESET,
-				     EXT_PHY_RST_DUR, 0x7 /* 10ms */,
-				     SWRST, 1);
+				     /* exclude PHY from "invisible" reset */
+				     FRF_AB_EXT_PHY_RST_CTL,
+				     method == RESET_TYPE_INVISIBLE,
+				     /* exclude EEPROM/flash and PCIe */
+				     FRF_AB_PCIE_CORE_RST_CTL, 1,
+				     FRF_AB_PCIE_NSTKY_RST_CTL, 1,
+				     FRF_AB_PCIE_SD_RST_CTL, 1,
+				     FRF_AB_EE_RST_CTL, 1,
+				     FRF_AB_EXT_PHY_RST_DUR,
+				     FFE_AB_EXT_PHY_RST_DUR_10240US,
+				     FRF_AB_SWRST, 1);
 	}
-	falcon_write(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
+	efx_writeo(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL);
 
 	EFX_LOG(efx, "waiting for hardware reset\n");
 	schedule_timeout_uninterruptible(HZ / 20);
@@ -2577,8 +2558,8 @@
 	}
 
 	/* Assert that reset complete */
-	falcon_read(efx, &glb_ctl_reg_ker, GLB_CTL_REG_KER);
-	if (EFX_OWORD_FIELD(glb_ctl_reg_ker, SWRST) != 0) {
+	efx_reado(efx, &glb_ctl_reg_ker, FR_AB_GLB_CTL);
+	if (EFX_OWORD_FIELD(glb_ctl_reg_ker, FRF_AB_SWRST) != 0) {
 		rc = -ETIMEDOUT;
 		EFX_ERR(efx, "timed out waiting for hardware reset\n");
 		goto fail5;
@@ -2606,16 +2587,16 @@
 	int count;
 
 	/* Set the SRAM wake/sleep GPIO appropriately. */
-	falcon_read(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OEN, 1);
-	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, GPIO1_OUT, 1);
-	falcon_write(efx, &gpio_cfg_reg_ker, GPIO_CTL_REG_KER);
+	efx_reado(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OEN, 1);
+	EFX_SET_OWORD_FIELD(gpio_cfg_reg_ker, FRF_AB_GPIO1_OUT, 1);
+	efx_writeo(efx, &gpio_cfg_reg_ker, FR_AB_GPIO_CTL);
 
 	/* Initiate SRAM reset */
 	EFX_POPULATE_OWORD_2(srm_cfg_reg_ker,
-			     SRAM_OOB_BT_INIT_EN, 1,
-			     SRM_NUM_BANKS_AND_BANK_SIZE, 0);
-	falcon_write(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
+			     FRF_AZ_SRM_INIT_EN, 1,
+			     FRF_AZ_SRM_NB_SZ, 0);
+	efx_writeo(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG);
 
 	/* Wait for SRAM reset to complete */
 	count = 0;
@@ -2626,8 +2607,8 @@
 		schedule_timeout_uninterruptible(HZ / 50);
 
 		/* Check for reset complete */
-		falcon_read(efx, &srm_cfg_reg_ker, SRM_CFG_REG_KER);
-		if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, SRAM_OOB_BT_INIT_EN)) {
+		efx_reado(efx, &srm_cfg_reg_ker, FR_AZ_SRM_CFG);
+		if (!EFX_OWORD_FIELD(srm_cfg_reg_ker, FRF_AZ_SRM_INIT_EN)) {
 			EFX_LOG(efx, "SRAM reset complete\n");
 
 			return 0;
@@ -2712,16 +2693,16 @@
 		board_rev = le16_to_cpu(v2->board_revision);
 
 		if (le16_to_cpu(nvconfig->board_struct_ver) >= 3) {
-			__le32 fl = v3->spi_device_type[EE_SPI_FLASH];
-			__le32 ee = v3->spi_device_type[EE_SPI_EEPROM];
-			rc = falcon_spi_device_init(efx, &efx->spi_flash,
-						    EE_SPI_FLASH,
-						    le32_to_cpu(fl));
+			rc = falcon_spi_device_init(
+				efx, &efx->spi_flash, FFE_AB_SPI_DEVICE_FLASH,
+				le32_to_cpu(v3->spi_device_type
+					    [FFE_AB_SPI_DEVICE_FLASH]));
 			if (rc)
 				goto fail2;
-			rc = falcon_spi_device_init(efx, &efx->spi_eeprom,
-						    EE_SPI_EEPROM,
-						    le32_to_cpu(ee));
+			rc = falcon_spi_device_init(
+				efx, &efx->spi_eeprom, FFE_AB_SPI_DEVICE_EEPROM,
+				le32_to_cpu(v3->spi_device_type
+					    [FFE_AB_SPI_DEVICE_EEPROM]));
 			if (rc)
 				goto fail2;
 		}
@@ -2732,7 +2713,7 @@
 
 	EFX_LOG(efx, "PHY is %d phy_id %d\n", efx->phy_type, efx->mdio.prtad);
 
-	efx_set_board_info(efx, board_rev);
+	falcon_probe_board(efx, board_rev);
 
 	kfree(nvconfig);
 	return 0;
@@ -2752,13 +2733,13 @@
 	efx_oword_t altera_build;
 	efx_oword_t nic_stat;
 
-	falcon_read(efx, &altera_build, ALTERA_BUILD_REG_KER);
-	if (EFX_OWORD_FIELD(altera_build, VER_ALL)) {
+	efx_reado(efx, &altera_build, FR_AZ_ALTERA_BUILD);
+	if (EFX_OWORD_FIELD(altera_build, FRF_AZ_ALTERA_BUILD_VER)) {
 		EFX_ERR(efx, "Falcon FPGA not supported\n");
 		return -ENODEV;
 	}
 
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
+	efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
 
 	switch (falcon_rev(efx)) {
 	case FALCON_REV_A0:
@@ -2767,7 +2748,7 @@
 		return -ENODEV;
 
 	case FALCON_REV_A1:
-		if (EFX_OWORD_FIELD(nic_stat, STRAP_PCIE) == 0) {
+		if (EFX_OWORD_FIELD(nic_stat, FRF_AA_STRAP_PCIE) == 0) {
 			EFX_ERR(efx, "Falcon rev A1 PCI-X not supported\n");
 			return -ENODEV;
 		}
@@ -2782,7 +2763,7 @@
 	}
 
 	/* Initial assumed speed */
-	efx->link_speed = EFX_OWORD_FIELD(nic_stat, STRAP_10G) ? 10000 : 1000;
+	efx->link_speed = EFX_OWORD_FIELD(nic_stat, FRF_AB_STRAP_10G) ? 10000 : 1000;
 
 	return 0;
 }
@@ -2793,34 +2774,36 @@
 	efx_oword_t nic_stat, gpio_ctl, ee_vpd_cfg;
 	int boot_dev;
 
-	falcon_read(efx, &gpio_ctl, GPIO_CTL_REG_KER);
-	falcon_read(efx, &nic_stat, NIC_STAT_REG);
-	falcon_read(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER);
+	efx_reado(efx, &gpio_ctl, FR_AB_GPIO_CTL);
+	efx_reado(efx, &nic_stat, FR_AB_NIC_STAT);
+	efx_reado(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0);
 
-	if (EFX_OWORD_FIELD(gpio_ctl, BOOTED_USING_NVDEVICE)) {
-		boot_dev = (EFX_OWORD_FIELD(nic_stat, SF_PRST) ?
-			    EE_SPI_FLASH : EE_SPI_EEPROM);
+	if (EFX_OWORD_FIELD(gpio_ctl, FRF_AB_GPIO3_PWRUP_VALUE)) {
+		boot_dev = (EFX_OWORD_FIELD(nic_stat, FRF_AB_SF_PRST) ?
+			    FFE_AB_SPI_DEVICE_FLASH : FFE_AB_SPI_DEVICE_EEPROM);
 		EFX_LOG(efx, "Booted from %s\n",
-			boot_dev == EE_SPI_FLASH ? "flash" : "EEPROM");
+			boot_dev == FFE_AB_SPI_DEVICE_FLASH ? "flash" : "EEPROM");
 	} else {
 		/* Disable VPD and set clock dividers to safe
 		 * values for initial programming. */
 		boot_dev = -1;
 		EFX_LOG(efx, "Booted from internal ASIC settings;"
 			" setting SPI config\n");
-		EFX_POPULATE_OWORD_3(ee_vpd_cfg, EE_VPD_EN, 0,
+		EFX_POPULATE_OWORD_3(ee_vpd_cfg, FRF_AB_EE_VPD_EN, 0,
 				     /* 125 MHz / 7 ~= 20 MHz */
-				     EE_SF_CLOCK_DIV, 7,
+				     FRF_AB_EE_SF_CLOCK_DIV, 7,
 				     /* 125 MHz / 63 ~= 2 MHz */
-				     EE_EE_CLOCK_DIV, 63);
-		falcon_write(efx, &ee_vpd_cfg, EE_VPD_CFG_REG_KER);
+				     FRF_AB_EE_EE_CLOCK_DIV, 63);
+		efx_writeo(efx, &ee_vpd_cfg, FR_AB_EE_VPD_CFG0);
 	}
 
-	if (boot_dev == EE_SPI_FLASH)
-		falcon_spi_device_init(efx, &efx->spi_flash, EE_SPI_FLASH,
+	if (boot_dev == FFE_AB_SPI_DEVICE_FLASH)
+		falcon_spi_device_init(efx, &efx->spi_flash,
+				       FFE_AB_SPI_DEVICE_FLASH,
 				       default_flash_type);
-	if (boot_dev == EE_SPI_EEPROM)
-		falcon_spi_device_init(efx, &efx->spi_eeprom, EE_SPI_EEPROM,
+	if (boot_dev == FFE_AB_SPI_DEVICE_EEPROM)
+		falcon_spi_device_init(efx, &efx->spi_eeprom,
+				       FFE_AB_SPI_DEVICE_EEPROM,
 				       large_eeprom_type);
 }
 
@@ -2911,6 +2894,52 @@
 	return rc;
 }
 
+static void falcon_init_rx_cfg(struct efx_nic *efx)
+{
+	/* Prior to Siena the RX DMA engine will split each frame at
+	 * intervals of RX_USR_BUF_SIZE (32-byte units). We set it to
+	 * be so large that that never happens. */
+	const unsigned huge_buf_size = (3 * 4096) >> 5;
+	/* RX control FIFO thresholds (32 entries) */
+	const unsigned ctrl_xon_thr = 20;
+	const unsigned ctrl_xoff_thr = 25;
+	/* RX data FIFO thresholds (256-byte units; size varies) */
+	int data_xon_thr = rx_xon_thresh_bytes >> 8;
+	int data_xoff_thr = rx_xoff_thresh_bytes >> 8;
+	efx_oword_t reg;
+
+	efx_reado(efx, &reg, FR_AZ_RX_CFG);
+	if (falcon_rev(efx) <= FALCON_REV_A1) {
+		/* Data FIFO size is 5.5K */
+		if (data_xon_thr < 0)
+			data_xon_thr = 512 >> 8;
+		if (data_xoff_thr < 0)
+			data_xoff_thr = 2048 >> 8;
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_DESC_PUSH_EN, 0);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_USR_BUF_SIZE,
+				    huge_buf_size);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_MAC_TH, data_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_MAC_TH, data_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XON_TX_TH, ctrl_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_AA_RX_XOFF_TX_TH, ctrl_xoff_thr);
+	} else {
+		/* Data FIFO size is 80K; register fields moved */
+		if (data_xon_thr < 0)
+			data_xon_thr = 27648 >> 8; /* ~3*max MTU */
+		if (data_xoff_thr < 0)
+			data_xoff_thr = 54272 >> 8; /* ~80Kb - 3*max MTU */
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_DESC_PUSH_EN, 0);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_USR_BUF_SIZE,
+				    huge_buf_size);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_MAC_TH, data_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_MAC_TH, data_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XON_TX_TH, ctrl_xon_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_XOFF_TX_TH, ctrl_xoff_thr);
+		EFX_SET_OWORD_FIELD(reg, FRF_BZ_RX_INGR_EN, 1);
+	}
+	efx_writeo(efx, &reg, FR_AZ_RX_CFG);
+}
+
 /* This call performs hardware-specific global initialisation, such as
  * defining the descriptor cache sizes and number of RSS channels.
  * It does not set up any buffers, descriptor rings or event queues.
@@ -2918,56 +2947,51 @@
 int falcon_init_nic(struct efx_nic *efx)
 {
 	efx_oword_t temp;
-	unsigned thresh;
 	int rc;
 
 	/* Use on-chip SRAM */
-	falcon_read(efx, &temp, NIC_STAT_REG);
-	EFX_SET_OWORD_FIELD(temp, ONCHIP_SRAM, 1);
-	falcon_write(efx, &temp, NIC_STAT_REG);
+	efx_reado(efx, &temp, FR_AB_NIC_STAT);
+	EFX_SET_OWORD_FIELD(temp, FRF_AB_ONCHIP_SRAM, 1);
+	efx_writeo(efx, &temp, FR_AB_NIC_STAT);
 
 	/* Set the source of the GMAC clock */
 	if (falcon_rev(efx) == FALCON_REV_B0) {
-		falcon_read(efx, &temp, GPIO_CTL_REG_KER);
-		EFX_SET_OWORD_FIELD(temp, GPIO_USE_NIC_CLK, true);
-		falcon_write(efx, &temp, GPIO_CTL_REG_KER);
+		efx_reado(efx, &temp, FR_AB_GPIO_CTL);
+		EFX_SET_OWORD_FIELD(temp, FRF_AB_USE_NIC_CLK, true);
+		efx_writeo(efx, &temp, FR_AB_GPIO_CTL);
 	}
 
-	/* Set buffer table mode */
-	EFX_POPULATE_OWORD_1(temp, BUF_TBL_MODE, BUF_TBL_MODE_FULL);
-	falcon_write(efx, &temp, BUF_TBL_CFG_REG_KER);
-
 	rc = falcon_reset_sram(efx);
 	if (rc)
 		return rc;
 
 	/* Set positions of descriptor caches in SRAM. */
-	EFX_POPULATE_OWORD_1(temp, SRM_TX_DC_BASE_ADR, TX_DC_BASE / 8);
-	falcon_write(efx, &temp, SRM_TX_DC_CFG_REG_KER);
-	EFX_POPULATE_OWORD_1(temp, SRM_RX_DC_BASE_ADR, RX_DC_BASE / 8);
-	falcon_write(efx, &temp, SRM_RX_DC_CFG_REG_KER);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_SRM_TX_DC_BASE_ADR, TX_DC_BASE / 8);
+	efx_writeo(efx, &temp, FR_AZ_SRM_TX_DC_CFG);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_SRM_RX_DC_BASE_ADR, RX_DC_BASE / 8);
+	efx_writeo(efx, &temp, FR_AZ_SRM_RX_DC_CFG);
 
 	/* Set TX descriptor cache size. */
 	BUILD_BUG_ON(TX_DC_ENTRIES != (16 << TX_DC_ENTRIES_ORDER));
-	EFX_POPULATE_OWORD_1(temp, TX_DC_SIZE, TX_DC_ENTRIES_ORDER);
-	falcon_write(efx, &temp, TX_DC_CFG_REG_KER);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_TX_DC_SIZE, TX_DC_ENTRIES_ORDER);
+	efx_writeo(efx, &temp, FR_AZ_TX_DC_CFG);
 
 	/* Set RX descriptor cache size.  Set low watermark to size-8, as
 	 * this allows most efficient prefetching.
 	 */
 	BUILD_BUG_ON(RX_DC_ENTRIES != (16 << RX_DC_ENTRIES_ORDER));
-	EFX_POPULATE_OWORD_1(temp, RX_DC_SIZE, RX_DC_ENTRIES_ORDER);
-	falcon_write(efx, &temp, RX_DC_CFG_REG_KER);
-	EFX_POPULATE_OWORD_1(temp, RX_DC_PF_LWM, RX_DC_ENTRIES - 8);
-	falcon_write(efx, &temp, RX_DC_PF_WM_REG_KER);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_RX_DC_SIZE, RX_DC_ENTRIES_ORDER);
+	efx_writeo(efx, &temp, FR_AZ_RX_DC_CFG);
+	EFX_POPULATE_OWORD_1(temp, FRF_AZ_RX_DC_PF_LWM, RX_DC_ENTRIES - 8);
+	efx_writeo(efx, &temp, FR_AZ_RX_DC_PF_WM);
 
 	/* Clear the parity enables on the TX data fifos as
 	 * they produce false parity errors because of timing issues
 	 */
 	if (EFX_WORKAROUND_5129(efx)) {
-		falcon_read(efx, &temp, SPARE_REG_KER);
-		EFX_SET_OWORD_FIELD(temp, MEM_PERR_EN_TX_DATA, 0);
-		falcon_write(efx, &temp, SPARE_REG_KER);
+		efx_reado(efx, &temp, FR_AZ_CSR_SPARE);
+		EFX_SET_OWORD_FIELD(temp, FRF_AB_MEM_PERR_EN_TX_DATA, 0);
+		efx_writeo(efx, &temp, FR_AZ_CSR_SPARE);
 	}
 
 	/* Enable all the genuinely fatal interrupts.  (They are still
@@ -2977,83 +3001,65 @@
 	 * Note: All other fatal interrupts are enabled
 	 */
 	EFX_POPULATE_OWORD_3(temp,
-			     ILL_ADR_INT_KER_EN, 1,
-			     RBUF_OWN_INT_KER_EN, 1,
-			     TBUF_OWN_INT_KER_EN, 1);
+			     FRF_AZ_ILL_ADR_INT_KER_EN, 1,
+			     FRF_AZ_RBUF_OWN_INT_KER_EN, 1,
+			     FRF_AZ_TBUF_OWN_INT_KER_EN, 1);
 	EFX_INVERT_OWORD(temp);
-	falcon_write(efx, &temp, FATAL_INTR_REG_KER);
+	efx_writeo(efx, &temp, FR_AZ_FATAL_INTR_KER);
 
 	if (EFX_WORKAROUND_7244(efx)) {
-		falcon_read(efx, &temp, RX_FILTER_CTL_REG);
-		EFX_SET_OWORD_FIELD(temp, UDP_FULL_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, UDP_WILD_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, TCP_FULL_SRCH_LIMIT, 8);
-		EFX_SET_OWORD_FIELD(temp, TCP_WILD_SRCH_LIMIT, 8);
-		falcon_write(efx, &temp, RX_FILTER_CTL_REG);
+		efx_reado(efx, &temp, FR_BZ_RX_FILTER_CTL);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_UDP_WILD_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_FULL_SRCH_LIMIT, 8);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TCP_WILD_SRCH_LIMIT, 8);
+		efx_writeo(efx, &temp, FR_BZ_RX_FILTER_CTL);
 	}
 
 	falcon_setup_rss_indir_table(efx);
 
+	/* XXX This is documented only for Falcon A0/A1 */
 	/* Setup RX.  Wait for descriptor is broken and must
 	 * be disabled.  RXDP recovery shouldn't be needed, but is.
 	 */
-	falcon_read(efx, &temp, RX_SELF_RST_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, RX_NODESC_WAIT_DIS, 1);
-	EFX_SET_OWORD_FIELD(temp, RX_RECOVERY_EN, 1);
+	efx_reado(efx, &temp, FR_AA_RX_SELF_RST);
+	EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_NODESC_WAIT_DIS, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_SELF_RST_EN, 1);
 	if (EFX_WORKAROUND_5583(efx))
-		EFX_SET_OWORD_FIELD(temp, RX_ISCSI_DIS, 1);
-	falcon_write(efx, &temp, RX_SELF_RST_REG_KER);
+		EFX_SET_OWORD_FIELD(temp, FRF_AA_RX_ISCSI_DIS, 1);
+	efx_writeo(efx, &temp, FR_AA_RX_SELF_RST);
 
 	/* Disable the ugly timer-based TX DMA backoff and allow TX DMA to be
 	 * controlled by the RX FIFO fill level. Set arbitration to one pkt/Q.
 	 */
-	falcon_read(efx, &temp, TX_CFG2_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER, 0xfe);
-	EFX_SET_OWORD_FIELD(temp, TX_RX_SPACER_EN, 1);
-	EFX_SET_OWORD_FIELD(temp, TX_ONE_PKT_PER_Q, 1);
-	EFX_SET_OWORD_FIELD(temp, TX_CSR_PUSH_EN, 0);
-	EFX_SET_OWORD_FIELD(temp, TX_DIS_NON_IP_EV, 1);
+	efx_reado(efx, &temp, FR_AZ_TX_RESERVED);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER, 0xfe);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_RX_SPACER_EN, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_ONE_PKT_PER_Q, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PUSH_EN, 0);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_DIS_NON_IP_EV, 1);
 	/* Enable SW_EV to inherit in char driver - assume harmless here */
-	EFX_SET_OWORD_FIELD(temp, TX_SW_EV_EN, 1);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_SOFT_EVT_EN, 1);
 	/* Prefetch threshold 2 => fetch when descriptor cache half empty */
-	EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_PREF_THRESHOLD, 2);
 	/* Squash TX of packets of 16 bytes or less */
 	if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
-		EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
-	falcon_write(efx, &temp, TX_CFG2_REG_KER);
+		EFX_SET_OWORD_FIELD(temp, FRF_BZ_TX_FLUSH_MIN_LEN_EN, 1);
+	efx_writeo(efx, &temp, FR_AZ_TX_RESERVED);
 
 	/* Do not enable TX_NO_EOP_DISC_EN, since it limits packets to 16
 	 * descriptors (which is bad).
 	 */
-	falcon_read(efx, &temp, TX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD(temp, TX_NO_EOP_DISC_EN, 0);
-	falcon_write(efx, &temp, TX_CFG_REG_KER);
+	efx_reado(efx, &temp, FR_AZ_TX_CFG);
+	EFX_SET_OWORD_FIELD(temp, FRF_AZ_TX_NO_EOP_DISC_EN, 0);
+	efx_writeo(efx, &temp, FR_AZ_TX_CFG);
 
-	/* RX config */
-	falcon_read(efx, &temp, RX_CFG_REG_KER);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_DESC_PUSH_EN, 0);
-	if (EFX_WORKAROUND_7575(efx))
-		EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
-					(3 * 4096) / 32);
-	if (falcon_rev(efx) >= FALCON_REV_B0)
-		EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
-
-	/* RX FIFO flow control thresholds */
-	thresh = ((rx_xon_thresh_bytes >= 0) ?
-		  rx_xon_thresh_bytes : efx->type->rx_xon_thresh);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_MAC_TH, thresh / 256);
-	thresh = ((rx_xoff_thresh_bytes >= 0) ?
-		  rx_xoff_thresh_bytes : efx->type->rx_xoff_thresh);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_MAC_TH, thresh / 256);
-	/* RX control FIFO thresholds [32 entries] */
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XON_TX_TH, 20);
-	EFX_SET_OWORD_FIELD_VER(efx, temp, RX_XOFF_TX_TH, 25);
-	falcon_write(efx, &temp, RX_CFG_REG_KER);
+	falcon_init_rx_cfg(efx);
 
 	/* Set destination of both TX and RX Flush events */
 	if (falcon_rev(efx) >= FALCON_REV_B0) {
-		EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
-		falcon_write(efx, &temp, DP_CTRL_REG);
+		EFX_POPULATE_OWORD_1(temp, FRF_BZ_FLS_EVQ_ID, 0);
+		efx_writeo(efx, &temp, FR_BZ_DP_CTRL);
 	}
 
 	return 0;
@@ -3089,8 +3095,9 @@
 {
 	efx_oword_t cnt;
 
-	falcon_read(efx, &cnt, RX_NODESC_DROP_REG_KER);
-	efx->n_rx_nodesc_drop_cnt += EFX_OWORD_FIELD(cnt, RX_NODESC_DROP_CNT);
+	efx_reado(efx, &cnt, FR_AZ_RX_NODESC_DROP);
+	efx->n_rx_nodesc_drop_cnt +=
+		EFX_OWORD_FIELD(cnt, FRF_AB_RX_NODESC_DROP_CNT);
 }
 
 /**************************************************************************
@@ -3101,45 +3108,31 @@
  */
 
 struct efx_nic_type falcon_a_nic_type = {
-	.mem_bar = 2,
 	.mem_map_size = 0x20000,
-	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_A1,
-	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_A1,
-	.buf_tbl_base = BUF_TBL_KER_A1,
-	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_A1,
-	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_A1,
-	.txd_ring_mask = FALCON_TXD_RING_MASK,
-	.rxd_ring_mask = FALCON_RXD_RING_MASK,
-	.evq_size = FALCON_EVQ_SIZE,
-	.max_dma_mask = FALCON_DMA_MASK,
-	.tx_dma_mask = FALCON_TX_DMA_MASK,
-	.bug5391_mask = 0xf,
-	.rx_xoff_thresh = 2048,
-	.rx_xon_thresh = 512,
+	.txd_ptr_tbl_base = FR_AA_TX_DESC_PTR_TBL_KER,
+	.rxd_ptr_tbl_base = FR_AA_RX_DESC_PTR_TBL_KER,
+	.buf_tbl_base = FR_AA_BUF_FULL_TBL_KER,
+	.evq_ptr_tbl_base = FR_AA_EVQ_PTR_TBL_KER,
+	.evq_rptr_tbl_base = FR_AA_EVQ_RPTR_KER,
+	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_padding = 0x24,
 	.max_interrupt_mode = EFX_INT_MODE_MSI,
 	.phys_addr_channels = 4,
 };
 
 struct efx_nic_type falcon_b_nic_type = {
-	.mem_bar = 2,
 	/* Map everything up to and including the RSS indirection
 	 * table.  Don't map MSI-X table, MSI-X PBA since Linux
 	 * requires that they not be mapped.  */
-	.mem_map_size = RX_RSS_INDIR_TBL_B0 + 0x800,
-	.txd_ptr_tbl_base = TX_DESC_PTR_TBL_KER_B0,
-	.rxd_ptr_tbl_base = RX_DESC_PTR_TBL_KER_B0,
-	.buf_tbl_base = BUF_TBL_KER_B0,
-	.evq_ptr_tbl_base = EVQ_PTR_TBL_KER_B0,
-	.evq_rptr_tbl_base = EVQ_RPTR_REG_KER_B0,
-	.txd_ring_mask = FALCON_TXD_RING_MASK,
-	.rxd_ring_mask = FALCON_RXD_RING_MASK,
-	.evq_size = FALCON_EVQ_SIZE,
-	.max_dma_mask = FALCON_DMA_MASK,
-	.tx_dma_mask = FALCON_TX_DMA_MASK,
-	.bug5391_mask = 0,
-	.rx_xoff_thresh = 54272, /* ~80Kb - 3*max MTU */
-	.rx_xon_thresh = 27648,  /* ~3*max MTU */
+	.mem_map_size = (FR_BZ_RX_INDIRECTION_TBL +
+			 FR_BZ_RX_INDIRECTION_TBL_STEP *
+			 FR_BZ_RX_INDIRECTION_TBL_ROWS),
+	.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
+	.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
+	.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
+	.evq_ptr_tbl_base = FR_BZ_EVQ_PTR_TBL,
+	.evq_rptr_tbl_base = FR_BZ_EVQ_RPTR,
+	.max_dma_mask = DMA_BIT_MASK(FSF_AZ_TX_KER_BUF_ADDR_WIDTH),
 	.rx_buffer_padding = 0,
 	.max_interrupt_mode = EFX_INT_MODE_MSIX,
 	.phys_addr_channels = 32, /* Hardware limit is 64, but the legacy
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
index 77f2e0d..4dd9657 100644
--- a/drivers/net/sfc/falcon.h
+++ b/drivers/net/sfc/falcon.h
@@ -39,6 +39,8 @@
  **************************************************************************
  */
 
+extern void falcon_probe_board(struct efx_nic *efx, u16 revision_info);
+
 /* TX data path */
 extern int falcon_probe_tx(struct efx_tx_queue *tx_queue);
 extern void falcon_init_tx(struct efx_tx_queue *tx_queue);
@@ -89,11 +91,9 @@
 
 /* Global Resources */
 extern int falcon_probe_nic(struct efx_nic *efx);
-extern int falcon_probe_resources(struct efx_nic *efx);
 extern int falcon_init_nic(struct efx_nic *efx);
 extern int falcon_flush_queues(struct efx_nic *efx);
 extern int falcon_reset_hw(struct efx_nic *efx, enum reset_type method);
-extern void falcon_remove_resources(struct efx_nic *efx);
 extern void falcon_remove_nic(struct efx_nic *efx);
 extern void falcon_update_nic_stats(struct efx_nic *efx);
 extern void falcon_set_multicast_hash(struct efx_nic *efx);
diff --git a/drivers/net/sfc/falcon_boards.c b/drivers/net/sfc/falcon_boards.c
new file mode 100644
index 0000000..99f7372
--- /dev/null
+++ b/drivers/net/sfc/falcon_boards.c
@@ -0,0 +1,752 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2007-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/rtnetlink.h>
+
+#include "net_driver.h"
+#include "phy.h"
+#include "efx.h"
+#include "falcon.h"
+#include "regs.h"
+#include "io.h"
+#include "workarounds.h"
+
+/* Macros for unpacking the board revision */
+/* The revision info is in host byte order. */
+#define FALCON_BOARD_TYPE(_rev) (_rev >> 8)
+#define FALCON_BOARD_MAJOR(_rev) ((_rev >> 4) & 0xf)
+#define FALCON_BOARD_MINOR(_rev) (_rev & 0xf)
+
+/* Board types */
+#define FALCON_BOARD_SFE4001 0x01
+#define FALCON_BOARD_SFE4002 0x02
+#define FALCON_BOARD_SFN4111T 0x51
+#define FALCON_BOARD_SFN4112F 0x52
+
+/* Blink support. If the PHY has no auto-blink mode so we hang it off a timer */
+#define BLINK_INTERVAL (HZ/2)
+
+static void blink_led_timer(unsigned long context)
+{
+	struct efx_nic *efx = (struct efx_nic *)context;
+	struct efx_board *board = &efx->board_info;
+
+	board->set_id_led(efx, board->blink_state);
+	board->blink_state = !board->blink_state;
+	if (board->blink_resubmit)
+		mod_timer(&board->blink_timer, jiffies + BLINK_INTERVAL);
+}
+
+static void board_blink(struct efx_nic *efx, bool blink)
+{
+	struct efx_board *board = &efx->board_info;
+
+	/* The rtnl mutex serialises all ethtool ioctls, so
+	 * nothing special needs doing here. */
+	if (blink) {
+		board->blink_resubmit = true;
+		board->blink_state = false;
+		setup_timer(&board->blink_timer, blink_led_timer,
+			    (unsigned long)efx);
+		mod_timer(&board->blink_timer, jiffies + BLINK_INTERVAL);
+	} else {
+		board->blink_resubmit = false;
+		if (board->blink_timer.function)
+			del_timer_sync(&board->blink_timer);
+		board->init_leds(efx);
+	}
+}
+
+/*****************************************************************************
+ * Support for LM87 sensor chip used on several boards
+ */
+#define LM87_REG_ALARMS1		0x41
+#define LM87_REG_ALARMS2		0x42
+#define LM87_IN_LIMITS(nr, _min, _max)			\
+	0x2B + (nr) * 2, _max, 0x2C + (nr) * 2, _min
+#define LM87_AIN_LIMITS(nr, _min, _max)			\
+	0x3B + (nr), _max, 0x1A + (nr), _min
+#define LM87_TEMP_INT_LIMITS(_min, _max)		\
+	0x39, _max, 0x3A, _min
+#define LM87_TEMP_EXT1_LIMITS(_min, _max)		\
+	0x37, _max, 0x38, _min
+
+#define LM87_ALARM_TEMP_INT		0x10
+#define LM87_ALARM_TEMP_EXT1		0x20
+
+#if defined(CONFIG_SENSORS_LM87) || defined(CONFIG_SENSORS_LM87_MODULE)
+
+static int efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+			 const u8 *reg_values)
+{
+	struct i2c_client *client = i2c_new_device(&efx->i2c_adap, info);
+	int rc;
+
+	if (!client)
+		return -EIO;
+
+	while (*reg_values) {
+		u8 reg = *reg_values++;
+		u8 value = *reg_values++;
+		rc = i2c_smbus_write_byte_data(client, reg, value);
+		if (rc)
+			goto err;
+	}
+
+	efx->board_info.hwmon_client = client;
+	return 0;
+
+err:
+	i2c_unregister_device(client);
+	return rc;
+}
+
+static void efx_fini_lm87(struct efx_nic *efx)
+{
+	i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+static int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+	struct i2c_client *client = efx->board_info.hwmon_client;
+	s32 alarms1, alarms2;
+
+	/* If link is up then do not monitor temperature */
+	if (EFX_WORKAROUND_7884(efx) && efx->link_up)
+		return 0;
+
+	alarms1 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS1);
+	alarms2 = i2c_smbus_read_byte_data(client, LM87_REG_ALARMS2);
+	if (alarms1 < 0)
+		return alarms1;
+	if (alarms2 < 0)
+		return alarms2;
+	alarms1 &= mask;
+	alarms2 &= mask >> 8;
+	if (alarms1 || alarms2) {
+		EFX_ERR(efx,
+			"LM87 detected a hardware failure (status %02x:%02x)"
+			"%s%s\n",
+			alarms1, alarms2,
+			(alarms1 & LM87_ALARM_TEMP_INT) ? " INTERNAL" : "",
+			(alarms1 & LM87_ALARM_TEMP_EXT1) ? " EXTERNAL" : "");
+		return -ERANGE;
+	}
+
+	return 0;
+}
+
+#else /* !CONFIG_SENSORS_LM87 */
+
+static inline int
+efx_init_lm87(struct efx_nic *efx, struct i2c_board_info *info,
+	      const u8 *reg_values)
+{
+	return 0;
+}
+static inline void efx_fini_lm87(struct efx_nic *efx)
+{
+}
+static inline int efx_check_lm87(struct efx_nic *efx, unsigned mask)
+{
+	return 0;
+}
+
+#endif /* CONFIG_SENSORS_LM87 */
+
+/*****************************************************************************
+ * Support for the SFE4001 and SFN4111T NICs.
+ *
+ * The SFE4001 does not power-up fully at reset due to its high power
+ * consumption.  We control its power via a PCA9539 I/O expander.
+ * Both boards have a MAX6647 temperature monitor which we expose to
+ * the lm90 driver.
+ *
+ * This also provides minimal support for reflashing the PHY, which is
+ * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
+ * On SFE4001 rev A2 and later this is connected to the 3V3X output of
+ * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3.
+ * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
+ * exclusive with the network device being open.
+ */
+
+/**************************************************************************
+ * Support for I2C IO Expander device on SFE40001
+ */
+#define	PCA9539 0x74
+
+#define	P0_IN 0x00
+#define	P0_OUT 0x02
+#define	P0_INVERT 0x04
+#define	P0_CONFIG 0x06
+
+#define	P0_EN_1V0X_LBN 0
+#define	P0_EN_1V0X_WIDTH 1
+#define	P0_EN_1V2_LBN 1
+#define	P0_EN_1V2_WIDTH 1
+#define	P0_EN_2V5_LBN 2
+#define	P0_EN_2V5_WIDTH 1
+#define	P0_EN_3V3X_LBN 3
+#define	P0_EN_3V3X_WIDTH 1
+#define	P0_EN_5V_LBN 4
+#define	P0_EN_5V_WIDTH 1
+#define	P0_SHORTEN_JTAG_LBN 5
+#define	P0_SHORTEN_JTAG_WIDTH 1
+#define	P0_X_TRST_LBN 6
+#define	P0_X_TRST_WIDTH 1
+#define	P0_DSP_RESET_LBN 7
+#define	P0_DSP_RESET_WIDTH 1
+
+#define	P1_IN 0x01
+#define	P1_OUT 0x03
+#define	P1_INVERT 0x05
+#define	P1_CONFIG 0x07
+
+#define	P1_AFE_PWD_LBN 0
+#define	P1_AFE_PWD_WIDTH 1
+#define	P1_DSP_PWD25_LBN 1
+#define	P1_DSP_PWD25_WIDTH 1
+#define	P1_RESERVED_LBN 2
+#define	P1_RESERVED_WIDTH 2
+#define	P1_SPARE_LBN 4
+#define	P1_SPARE_WIDTH 4
+
+/* Temperature Sensor */
+#define MAX664X_REG_RSL		0x02
+#define MAX664X_REG_WLHO	0x0B
+
+static void sfe4001_poweroff(struct efx_nic *efx)
+{
+	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
+	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
+
+	/* Turn off all power rails and disable outputs */
+	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
+	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
+	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
+
+	/* Clear any over-temperature alert */
+	i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
+}
+
+static int sfe4001_poweron(struct efx_nic *efx)
+{
+	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
+	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
+	unsigned int i, j;
+	int rc;
+	u8 out;
+
+	/* Clear any previous over-temperature alert */
+	rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
+	if (rc < 0)
+		return rc;
+
+	/* Enable port 0 and port 1 outputs on IO expander */
+	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
+	if (rc)
+		return rc;
+	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
+				       0xff & ~(1 << P1_SPARE_LBN));
+	if (rc)
+		goto fail_on;
+
+	/* If PHY power is on, turn it all off and wait 1 second to
+	 * ensure a full reset.
+	 */
+	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
+	if (rc < 0)
+		goto fail_on;
+	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
+		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
+		       (0 << P0_EN_1V0X_LBN));
+	if (rc != out) {
+		EFX_INFO(efx, "power-cycling PHY\n");
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+		schedule_timeout_uninterruptible(HZ);
+	}
+
+	for (i = 0; i < 20; ++i) {
+		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
+		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
+			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
+			       (1 << P0_X_TRST_LBN));
+		if (efx->phy_mode & PHY_MODE_SPECIAL)
+			out |= 1 << P0_EN_3V3X_LBN;
+
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+		msleep(10);
+
+		/* Turn on 1V power rail */
+		out &= ~(1 << P0_EN_1V0X_LBN);
+		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
+		if (rc)
+			goto fail_on;
+
+		EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
+
+		/* In flash config mode, DSP does not turn on AFE, so
+		 * just wait 1 second.
+		 */
+		if (efx->phy_mode & PHY_MODE_SPECIAL) {
+			schedule_timeout_uninterruptible(HZ);
+			return 0;
+		}
+
+		for (j = 0; j < 10; ++j) {
+			msleep(100);
+
+			/* Check DSP has asserted AFE power line */
+			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
+			if (rc < 0)
+				goto fail_on;
+			if (rc & (1 << P1_AFE_PWD_LBN))
+				return 0;
+		}
+	}
+
+	EFX_INFO(efx, "timed out waiting for DSP boot\n");
+	rc = -ETIMEDOUT;
+fail_on:
+	sfe4001_poweroff(efx);
+	return rc;
+}
+
+static int sfn4111t_reset(struct efx_nic *efx)
+{
+	efx_oword_t reg;
+
+	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
+	mutex_lock(&efx->i2c_adap.bus_lock);
+
+	/* Pull RST_N (GPIO 2) low then let it up again, setting the
+	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
+	 * output enables; the output levels should always be 0 (low)
+	 * and we rely on external pull-ups. */
+	efx_reado(efx, &reg, FR_AB_GPIO_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, true);
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
+	msleep(1000);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO2_OEN, false);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GPIO3_OEN,
+			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
+	efx_writeo(efx, &reg, FR_AB_GPIO_CTL);
+	msleep(1);
+
+	mutex_unlock(&efx->i2c_adap.bus_lock);
+
+	ssleep(1);
+	return 0;
+}
+
+static ssize_t show_phy_flash_cfg(struct device *dev,
+				  struct device_attribute *attr, char *buf)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
+}
+
+static ssize_t set_phy_flash_cfg(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
+	enum efx_phy_mode old_mode, new_mode;
+	int err;
+
+	rtnl_lock();
+	old_mode = efx->phy_mode;
+	if (count == 0 || *buf == '0')
+		new_mode = old_mode & ~PHY_MODE_SPECIAL;
+	else
+		new_mode = PHY_MODE_SPECIAL;
+	if (old_mode == new_mode) {
+		err = 0;
+	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
+		err = -EBUSY;
+	} else {
+		/* Reset the PHY, reconfigure the MAC and enable/disable
+		 * MAC stats accordingly. */
+		efx->phy_mode = new_mode;
+		if (new_mode & PHY_MODE_SPECIAL)
+			efx_stats_disable(efx);
+		if (efx->board_info.type == FALCON_BOARD_SFE4001)
+			err = sfe4001_poweron(efx);
+		else
+			err = sfn4111t_reset(efx);
+		efx_reconfigure_port(efx);
+		if (!(new_mode & PHY_MODE_SPECIAL))
+			efx_stats_enable(efx);
+	}
+	rtnl_unlock();
+
+	return err ? err : count;
+}
+
+static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
+
+static void sfe4001_fini(struct efx_nic *efx)
+{
+	EFX_INFO(efx, "%s\n", __func__);
+
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	sfe4001_poweroff(efx);
+	i2c_unregister_device(efx->board_info.ioexp_client);
+	i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+static int sfe4001_check_hw(struct efx_nic *efx)
+{
+	s32 status;
+
+	/* If XAUI link is up then do not monitor */
+	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
+		return 0;
+
+	/* Check the powered status of the PHY. Lack of power implies that
+	 * the MAX6647 has shut down power to it, probably due to a temp.
+	 * alarm. Reading the power status rather than the MAX6647 status
+	 * directly because the later is read-to-clear and would thus
+	 * start to power up the PHY again when polled, causing us to blip
+	 * the power undesirably.
+	 * We know we can read from the IO expander because we did
+	 * it during power-on. Assume failure now is bad news. */
+	status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN);
+	if (status >= 0 &&
+	    (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
+		return 0;
+
+	/* Use board power control, not PHY power control */
+	sfe4001_poweroff(efx);
+	efx->phy_mode = PHY_MODE_OFF;
+
+	return (status < 0) ? -EIO : -ERANGE;
+}
+
+static struct i2c_board_info sfe4001_hwmon_info = {
+	I2C_BOARD_INFO("max6647", 0x4e),
+};
+
+/* This board uses an I2C expander to provider power to the PHY, which needs to
+ * be turned on before the PHY can be used.
+ * Context: Process context, rtnl lock held
+ */
+static int sfe4001_init(struct efx_nic *efx)
+{
+	int rc;
+
+#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
+	efx->board_info.hwmon_client =
+		i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
+#else
+	efx->board_info.hwmon_client =
+		i2c_new_dummy(&efx->i2c_adap, sfe4001_hwmon_info.addr);
+#endif
+	if (!efx->board_info.hwmon_client)
+		return -EIO;
+
+	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
+	rc = i2c_smbus_write_byte_data(efx->board_info.hwmon_client,
+				       MAX664X_REG_WLHO, 90);
+	if (rc)
+		goto fail_hwmon;
+
+	efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
+	if (!efx->board_info.ioexp_client) {
+		rc = -EIO;
+		goto fail_hwmon;
+	}
+
+	/* 10Xpress has fixed-function LED pins, so there is no board-specific
+	 * blink code. */
+	efx->board_info.blink = tenxpress_phy_blink;
+
+	efx->board_info.monitor = sfe4001_check_hw;
+	efx->board_info.fini = sfe4001_fini;
+
+	if (efx->phy_mode & PHY_MODE_SPECIAL) {
+		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
+		 * will fail. */
+		efx_stats_disable(efx);
+	}
+	rc = sfe4001_poweron(efx);
+	if (rc)
+		goto fail_ioexp;
+
+	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	if (rc)
+		goto fail_on;
+
+	EFX_INFO(efx, "PHY is powered on\n");
+	return 0;
+
+fail_on:
+	sfe4001_poweroff(efx);
+fail_ioexp:
+	i2c_unregister_device(efx->board_info.ioexp_client);
+fail_hwmon:
+	i2c_unregister_device(efx->board_info.hwmon_client);
+	return rc;
+}
+
+static int sfn4111t_check_hw(struct efx_nic *efx)
+{
+	s32 status;
+
+	/* If XAUI link is up then do not monitor */
+	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
+		return 0;
+
+	/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
+	status = i2c_smbus_read_byte_data(efx->board_info.hwmon_client,
+					  MAX664X_REG_RSL);
+	if (status < 0)
+		return -EIO;
+	if (status & 0x57)
+		return -ERANGE;
+	return 0;
+}
+
+static void sfn4111t_fini(struct efx_nic *efx)
+{
+	EFX_INFO(efx, "%s\n", __func__);
+
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	i2c_unregister_device(efx->board_info.hwmon_client);
+}
+
+static struct i2c_board_info sfn4111t_a0_hwmon_info = {
+	I2C_BOARD_INFO("max6647", 0x4e),
+};
+
+static struct i2c_board_info sfn4111t_r5_hwmon_info = {
+	I2C_BOARD_INFO("max6646", 0x4d),
+};
+
+static int sfn4111t_init(struct efx_nic *efx)
+{
+	int i = 0;
+	int rc;
+
+	efx->board_info.hwmon_client =
+		i2c_new_device(&efx->i2c_adap,
+			       (efx->board_info.minor < 5) ?
+			       &sfn4111t_a0_hwmon_info :
+			       &sfn4111t_r5_hwmon_info);
+	if (!efx->board_info.hwmon_client)
+		return -EIO;
+
+	efx->board_info.blink = tenxpress_phy_blink;
+	efx->board_info.monitor = sfn4111t_check_hw;
+	efx->board_info.fini = sfn4111t_fini;
+
+	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+	if (rc)
+		goto fail_hwmon;
+
+	do {
+		if (efx->phy_mode & PHY_MODE_SPECIAL) {
+			/* PHY may not generate a 156.25 MHz clock and MAC
+			 * stats fetch will fail. */
+			efx_stats_disable(efx);
+			sfn4111t_reset(efx);
+		}
+		rc = sft9001_wait_boot(efx);
+		if (rc == 0)
+			return 0;
+		efx->phy_mode = PHY_MODE_SPECIAL;
+	} while (rc == -EINVAL && ++i < 2);
+
+	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
+fail_hwmon:
+	i2c_unregister_device(efx->board_info.hwmon_client);
+	return rc;
+}
+
+/*****************************************************************************
+ * Support for the SFE4002
+ *
+ */
+static u8 sfe4002_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfe4002_lm87_regs[] = {
+	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
+	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
+	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
+	LM87_IN_LIMITS(3, 0xb0, 0xc9),		/* 5V:    4.6-5.2V */
+	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
+	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
+	LM87_AIN_LIMITS(0, 0xa0, 0xb2),		/* AIN1:  1.66V +/- 5% */
+	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
+	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
+	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	0
+};
+
+static struct i2c_board_info sfe4002_hwmon_info = {
+	I2C_BOARD_INFO("lm87", 0x2e),
+	.platform_data	= &sfe4002_lm87_channel,
+};
+
+/****************************************************************************/
+/* LED allocations. Note that on rev A0 boards the schematic and the reality
+ * differ: red and green are swapped. Below is the fixed (A1) layout (there
+ * are only 3 A0 boards in existence, so no real reason to make this
+ * conditional).
+ */
+#define SFE4002_FAULT_LED (2)	/* Red */
+#define SFE4002_RX_LED    (0)	/* Green */
+#define SFE4002_TX_LED    (1)	/* Amber */
+
+static void sfe4002_init_leds(struct efx_nic *efx)
+{
+	/* Set the TX and RX LEDs to reflect status and activity, and the
+	 * fault LED off */
+	falcon_qt202x_set_led(efx, SFE4002_TX_LED,
+			      QUAKE_LED_TXLINK | QUAKE_LED_LINK_ACTSTAT);
+	falcon_qt202x_set_led(efx, SFE4002_RX_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACTSTAT);
+	falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, QUAKE_LED_OFF);
+}
+
+static void sfe4002_set_id_led(struct efx_nic *efx, bool state)
+{
+	falcon_qt202x_set_led(efx, SFE4002_FAULT_LED, state ? QUAKE_LED_ON :
+			      QUAKE_LED_OFF);
+}
+
+static int sfe4002_check_hw(struct efx_nic *efx)
+{
+	/* A0 board rev. 4002s report a temperature fault the whole time
+	 * (bad sensor) so we mask it out. */
+	unsigned alarm_mask =
+		(efx->board_info.major == 0 && efx->board_info.minor == 0) ?
+		~LM87_ALARM_TEMP_EXT1 : ~0;
+
+	return efx_check_lm87(efx, alarm_mask);
+}
+
+static int sfe4002_init(struct efx_nic *efx)
+{
+	int rc = efx_init_lm87(efx, &sfe4002_hwmon_info, sfe4002_lm87_regs);
+	if (rc)
+		return rc;
+	efx->board_info.monitor = sfe4002_check_hw;
+	efx->board_info.init_leds = sfe4002_init_leds;
+	efx->board_info.set_id_led = sfe4002_set_id_led;
+	efx->board_info.blink = board_blink;
+	efx->board_info.fini = efx_fini_lm87;
+	return 0;
+}
+
+/*****************************************************************************
+ * Support for the SFN4112F
+ *
+ */
+static u8 sfn4112f_lm87_channel = 0x03; /* use AIN not FAN inputs */
+
+static const u8 sfn4112f_lm87_regs[] = {
+	LM87_IN_LIMITS(0, 0x83, 0x91),		/* 2.5V:  1.8V +/- 5% */
+	LM87_IN_LIMITS(1, 0x51, 0x5a),		/* Vccp1: 1.2V +/- 5% */
+	LM87_IN_LIMITS(2, 0xb6, 0xca),		/* 3.3V:  3.3V +/- 5% */
+	LM87_IN_LIMITS(4, 0xb0, 0xe0),		/* 12V:   11-14V */
+	LM87_IN_LIMITS(5, 0x44, 0x4b),		/* Vccp2: 1.0V +/- 5% */
+	LM87_AIN_LIMITS(1, 0x91, 0xa1),		/* AIN2:  1.5V +/- 5% */
+	LM87_TEMP_INT_LIMITS(10, 60),		/* board */
+	LM87_TEMP_EXT1_LIMITS(10, 70),		/* Falcon */
+	0
+};
+
+static struct i2c_board_info sfn4112f_hwmon_info = {
+	I2C_BOARD_INFO("lm87", 0x2e),
+	.platform_data	= &sfn4112f_lm87_channel,
+};
+
+#define SFN4112F_ACT_LED	0
+#define SFN4112F_LINK_LED	1
+
+static void sfn4112f_init_leds(struct efx_nic *efx)
+{
+	falcon_qt202x_set_led(efx, SFN4112F_ACT_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_ACT);
+	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
+			      QUAKE_LED_RXLINK | QUAKE_LED_LINK_STAT);
+}
+
+static void sfn4112f_set_id_led(struct efx_nic *efx, bool state)
+{
+	falcon_qt202x_set_led(efx, SFN4112F_LINK_LED,
+			      state ? QUAKE_LED_ON : QUAKE_LED_OFF);
+}
+
+static int sfn4112f_check_hw(struct efx_nic *efx)
+{
+	/* Mask out unused sensors */
+	return efx_check_lm87(efx, ~0x48);
+}
+
+static int sfn4112f_init(struct efx_nic *efx)
+{
+	int rc = efx_init_lm87(efx, &sfn4112f_hwmon_info, sfn4112f_lm87_regs);
+	if (rc)
+		return rc;
+	efx->board_info.monitor = sfn4112f_check_hw;
+	efx->board_info.init_leds = sfn4112f_init_leds;
+	efx->board_info.set_id_led = sfn4112f_set_id_led;
+	efx->board_info.blink = board_blink;
+	efx->board_info.fini = efx_fini_lm87;
+	return 0;
+}
+
+/* This will get expanded as board-specific details get moved out of the
+ * PHY drivers. */
+struct falcon_board_data {
+	u8 type;
+	const char *ref_model;
+	const char *gen_type;
+	int (*init) (struct efx_nic *nic);
+};
+
+
+static struct falcon_board_data board_data[] = {
+	{ FALCON_BOARD_SFE4001, "SFE4001", "10GBASE-T adapter", sfe4001_init },
+	{ FALCON_BOARD_SFE4002, "SFE4002", "XFP adapter", sfe4002_init },
+	{ FALCON_BOARD_SFN4111T, "SFN4111T", "100/1000/10GBASE-T adapter",
+	  sfn4111t_init },
+	{ FALCON_BOARD_SFN4112F, "SFN4112F", "SFP+ adapter",
+	  sfn4112f_init },
+};
+
+void falcon_probe_board(struct efx_nic *efx, u16 revision_info)
+{
+	struct falcon_board_data *data = NULL;
+	int i;
+
+	efx->board_info.type = FALCON_BOARD_TYPE(revision_info);
+	efx->board_info.major = FALCON_BOARD_MAJOR(revision_info);
+	efx->board_info.minor = FALCON_BOARD_MINOR(revision_info);
+
+	for (i = 0; i < ARRAY_SIZE(board_data); i++)
+		if (board_data[i].type == efx->board_info.type)
+			data = &board_data[i];
+
+	if (data) {
+		EFX_INFO(efx, "board is %s rev %c%d\n",
+			 (efx->pci_dev->subsystem_vendor == EFX_VENDID_SFC)
+			 ? data->ref_model : data->gen_type,
+			 'A' + efx->board_info.major, efx->board_info.minor);
+		efx->board_info.init = data->init;
+	} else {
+		EFX_ERR(efx, "unknown board type %d\n", efx->board_info.type);
+	}
+}
diff --git a/drivers/net/sfc/falcon_gmac.c b/drivers/net/sfc/falcon_gmac.c
index 8865eae..8a1b80d 100644
--- a/drivers/net/sfc/falcon_gmac.c
+++ b/drivers/net/sfc/falcon_gmac.c
@@ -13,9 +13,8 @@
 #include "efx.h"
 #include "falcon.h"
 #include "mac.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
-#include "gmii.h"
+#include "regs.h"
+#include "io.h"
 
 /**************************************************************************
  *
@@ -37,89 +36,89 @@
 	bytemode = (efx->link_speed == 1000);
 
 	EFX_POPULATE_OWORD_5(reg,
-			     GM_LOOP, loopback,
-			     GM_TX_EN, 1,
-			     GM_TX_FC_EN, tx_fc,
-			     GM_RX_EN, 1,
-			     GM_RX_FC_EN, rx_fc);
-	falcon_write(efx, &reg, GM_CFG1_REG);
+			     FRF_AB_GM_LOOP, loopback,
+			     FRF_AB_GM_TX_EN, 1,
+			     FRF_AB_GM_TX_FC_EN, tx_fc,
+			     FRF_AB_GM_RX_EN, 1,
+			     FRF_AB_GM_RX_FC_EN, rx_fc);
+	efx_writeo(efx, &reg, FR_AB_GM_CFG1);
 	udelay(10);
 
 	/* Configuration register 2 */
 	if_mode = (bytemode) ? 2 : 1;
 	EFX_POPULATE_OWORD_5(reg,
-			     GM_IF_MODE, if_mode,
-			     GM_PAD_CRC_EN, 1,
-			     GM_LEN_CHK, 1,
-			     GM_FD, efx->link_fd,
-			     GM_PAMBL_LEN, 0x7/*datasheet recommended */);
+			     FRF_AB_GM_IF_MODE, if_mode,
+			     FRF_AB_GM_PAD_CRC_EN, 1,
+			     FRF_AB_GM_LEN_CHK, 1,
+			     FRF_AB_GM_FD, efx->link_fd,
+			     FRF_AB_GM_PAMBL_LEN, 0x7/*datasheet recommended */);
 
-	falcon_write(efx, &reg, GM_CFG2_REG);
+	efx_writeo(efx, &reg, FR_AB_GM_CFG2);
 	udelay(10);
 
 	/* Max frame len register */
 	max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu);
-	EFX_POPULATE_OWORD_1(reg, GM_MAX_FLEN, max_frame_len);
-	falcon_write(efx, &reg, GM_MAX_FLEN_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_GM_MAX_FLEN, max_frame_len);
+	efx_writeo(efx, &reg, FR_AB_GM_MAX_FLEN);
 	udelay(10);
 
 	/* FIFO configuration register 0 */
 	EFX_POPULATE_OWORD_5(reg,
-			     GMF_FTFENREQ, 1,
-			     GMF_STFENREQ, 1,
-			     GMF_FRFENREQ, 1,
-			     GMF_SRFENREQ, 1,
-			     GMF_WTMENREQ, 1);
-	falcon_write(efx, &reg, GMF_CFG0_REG);
+			     FRF_AB_GMF_FTFENREQ, 1,
+			     FRF_AB_GMF_STFENREQ, 1,
+			     FRF_AB_GMF_FRFENREQ, 1,
+			     FRF_AB_GMF_SRFENREQ, 1,
+			     FRF_AB_GMF_WTMENREQ, 1);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG0);
 	udelay(10);
 
 	/* FIFO configuration register 1 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGFRTH, 0x12,
-			     GMF_CFGXOFFRTX, 0xffff);
-	falcon_write(efx, &reg, GMF_CFG1_REG);
+			     FRF_AB_GMF_CFGFRTH, 0x12,
+			     FRF_AB_GMF_CFGXOFFRTX, 0xffff);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG1);
 	udelay(10);
 
 	/* FIFO configuration register 2 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGHWM, 0x3f,
-			     GMF_CFGLWM, 0xa);
-	falcon_write(efx, &reg, GMF_CFG2_REG);
+			     FRF_AB_GMF_CFGHWM, 0x3f,
+			     FRF_AB_GMF_CFGLWM, 0xa);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG2);
 	udelay(10);
 
 	/* FIFO configuration register 3 */
 	EFX_POPULATE_OWORD_2(reg,
-			     GMF_CFGHWMFT, 0x1c,
-			     GMF_CFGFTTH, 0x08);
-	falcon_write(efx, &reg, GMF_CFG3_REG);
+			     FRF_AB_GMF_CFGHWMFT, 0x1c,
+			     FRF_AB_GMF_CFGFTTH, 0x08);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG3);
 	udelay(10);
 
 	/* FIFO configuration register 4 */
-	EFX_POPULATE_OWORD_1(reg, GMF_HSTFLTRFRM_PAUSE, 1);
-	falcon_write(efx, &reg, GMF_CFG4_REG);
+	EFX_POPULATE_OWORD_1(reg, FRF_AB_GMF_HSTFLTRFRM_PAUSE, 1);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG4);
 	udelay(10);
 
 	/* FIFO configuration register 5 */
-	falcon_read(efx, &reg, GMF_CFG5_REG);
-	EFX_SET_OWORD_FIELD(reg, GMF_CFGBYTMODE, bytemode);
-	EFX_SET_OWORD_FIELD(reg, GMF_CFGHDPLX, !efx->link_fd);
-	EFX_SET_OWORD_FIELD(reg, GMF_HSTDRPLT64, !efx->link_fd);
-	EFX_SET_OWORD_FIELD(reg, GMF_HSTFLTRFRMDC_PAUSE, 0);
-	falcon_write(efx, &reg, GMF_CFG5_REG);
+	efx_reado(efx, &reg, FR_AB_GMF_CFG5);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_CFGBYTMODE, bytemode);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_CFGHDPLX, !efx->link_fd);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_HSTDRPLT64, !efx->link_fd);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_GMF_HSTFLTRFRMDC_PAUSE, 0);
+	efx_writeo(efx, &reg, FR_AB_GMF_CFG5);
 	udelay(10);
 
 	/* MAC address */
 	EFX_POPULATE_OWORD_4(reg,
-			     GM_HWADDR_5, efx->net_dev->dev_addr[5],
-			     GM_HWADDR_4, efx->net_dev->dev_addr[4],
-			     GM_HWADDR_3, efx->net_dev->dev_addr[3],
-			     GM_HWADDR_2, efx->net_dev->dev_addr[2]);
-	falcon_write(efx, &reg, GM_ADR1_REG);
+			     FRF_AB_GM_ADR_B0, efx->net_dev->dev_addr[5],
+			     FRF_AB_GM_ADR_B1, efx->net_dev->dev_addr[4],
+			     FRF_AB_GM_ADR_B2, efx->net_dev->dev_addr[3],
+			     FRF_AB_GM_ADR_B3, efx->net_dev->dev_addr[2]);
+	efx_writeo(efx, &reg, FR_AB_GM_ADR1);
 	udelay(10);
 	EFX_POPULATE_OWORD_2(reg,
-			     GM_HWADDR_1, efx->net_dev->dev_addr[1],
-			     GM_HWADDR_0, efx->net_dev->dev_addr[0]);
-	falcon_write(efx, &reg, GM_ADR2_REG);
+			     FRF_AB_GM_ADR_B4, efx->net_dev->dev_addr[1],
+			     FRF_AB_GM_ADR_B5, efx->net_dev->dev_addr[0]);
+	efx_writeo(efx, &reg, FR_AB_GM_ADR2);
 	udelay(10);
 
 	falcon_reconfigure_mac_wrapper(efx);
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
deleted file mode 100644
index 2d22611..0000000
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ /dev/null
@@ -1,1333 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_FALCON_HWDEFS_H
-#define EFX_FALCON_HWDEFS_H
-
-/*
- * Falcon hardware value definitions.
- * Falcon is the internal codename for the SFC4000 controller that is
- * present in SFE400X evaluation boards
- */
-
-/**************************************************************************
- *
- * Falcon registers
- *
- **************************************************************************
- */
-
-/* Address region register */
-#define ADR_REGION_REG_KER	0x00
-#define ADR_REGION0_LBN	0
-#define ADR_REGION0_WIDTH	18
-#define ADR_REGION1_LBN	32
-#define ADR_REGION1_WIDTH	18
-#define ADR_REGION2_LBN	64
-#define ADR_REGION2_WIDTH	18
-#define ADR_REGION3_LBN	96
-#define ADR_REGION3_WIDTH	18
-
-/* Interrupt enable register */
-#define INT_EN_REG_KER 0x0010
-#define KER_INT_KER_LBN 3
-#define KER_INT_KER_WIDTH 1
-#define DRV_INT_EN_KER_LBN 0
-#define DRV_INT_EN_KER_WIDTH 1
-
-/* Interrupt status address register */
-#define INT_ADR_REG_KER	0x0030
-#define NORM_INT_VEC_DIS_KER_LBN 64
-#define NORM_INT_VEC_DIS_KER_WIDTH 1
-#define INT_ADR_KER_LBN 0
-#define INT_ADR_KER_WIDTH EFX_DMA_TYPE_WIDTH(64) /* not 46 for this one */
-
-/* Interrupt status register (B0 only) */
-#define INT_ISR0_B0 0x90
-#define INT_ISR1_B0 0xA0
-
-/* Interrupt acknowledge register (A0/A1 only) */
-#define INT_ACK_REG_KER_A1 0x0050
-#define INT_ACK_DUMMY_DATA_LBN 0
-#define INT_ACK_DUMMY_DATA_WIDTH 32
-
-/* Interrupt acknowledge work-around register (A0/A1 only )*/
-#define WORK_AROUND_BROKEN_PCI_READS_REG_KER_A1 0x0070
-
-/* SPI host command register */
-#define EE_SPI_HCMD_REG_KER 0x0100
-#define EE_SPI_HCMD_CMD_EN_LBN 31
-#define EE_SPI_HCMD_CMD_EN_WIDTH 1
-#define EE_WR_TIMER_ACTIVE_LBN 28
-#define EE_WR_TIMER_ACTIVE_WIDTH 1
-#define EE_SPI_HCMD_SF_SEL_LBN 24
-#define EE_SPI_HCMD_SF_SEL_WIDTH 1
-#define EE_SPI_EEPROM 0
-#define EE_SPI_FLASH 1
-#define EE_SPI_HCMD_DABCNT_LBN 16
-#define EE_SPI_HCMD_DABCNT_WIDTH 5
-#define EE_SPI_HCMD_READ_LBN 15
-#define EE_SPI_HCMD_READ_WIDTH 1
-#define EE_SPI_READ 1
-#define EE_SPI_WRITE 0
-#define EE_SPI_HCMD_DUBCNT_LBN 12
-#define EE_SPI_HCMD_DUBCNT_WIDTH 2
-#define EE_SPI_HCMD_ADBCNT_LBN 8
-#define EE_SPI_HCMD_ADBCNT_WIDTH 2
-#define EE_SPI_HCMD_ENC_LBN 0
-#define EE_SPI_HCMD_ENC_WIDTH 8
-
-/* SPI host address register */
-#define EE_SPI_HADR_REG_KER 0x0110
-#define EE_SPI_HADR_ADR_LBN 0
-#define EE_SPI_HADR_ADR_WIDTH 24
-
-/* SPI host data register */
-#define EE_SPI_HDATA_REG_KER 0x0120
-
-/* SPI/VPD config register */
-#define EE_VPD_CFG_REG_KER 0x0140
-#define EE_VPD_EN_LBN 0
-#define EE_VPD_EN_WIDTH 1
-#define EE_VPD_EN_AD9_MODE_LBN 1
-#define EE_VPD_EN_AD9_MODE_WIDTH 1
-#define EE_EE_CLOCK_DIV_LBN 112
-#define EE_EE_CLOCK_DIV_WIDTH 7
-#define EE_SF_CLOCK_DIV_LBN 120
-#define EE_SF_CLOCK_DIV_WIDTH 7
-
-/* PCIE CORE ACCESS REG */
-#define PCIE_CORE_ADDR_PCIE_DEVICE_CTRL_STAT 0x68
-#define PCIE_CORE_ADDR_PCIE_LINK_CTRL_STAT 0x70
-#define PCIE_CORE_ADDR_ACK_RPL_TIMER 0x700
-#define PCIE_CORE_ADDR_ACK_FREQ 0x70C
-
-/* NIC status register */
-#define NIC_STAT_REG 0x0200
-#define EE_STRAP_EN_LBN 31
-#define EE_STRAP_EN_WIDTH 1
-#define EE_STRAP_OVR_LBN 24
-#define EE_STRAP_OVR_WIDTH 4
-#define ONCHIP_SRAM_LBN 16
-#define ONCHIP_SRAM_WIDTH 1
-#define SF_PRST_LBN 9
-#define SF_PRST_WIDTH 1
-#define EE_PRST_LBN 8
-#define EE_PRST_WIDTH 1
-#define STRAP_PINS_LBN 0
-#define STRAP_PINS_WIDTH 3
-/* These bit definitions are extrapolated from the list of numerical
- * values for STRAP_PINS.
- */
-#define STRAP_10G_LBN 2
-#define STRAP_10G_WIDTH 1
-#define STRAP_PCIE_LBN 0
-#define STRAP_PCIE_WIDTH 1
-
-#define BOOTED_USING_NVDEVICE_LBN 3
-#define BOOTED_USING_NVDEVICE_WIDTH 1
-
-/* GPIO control register */
-#define GPIO_CTL_REG_KER 0x0210
-#define GPIO_USE_NIC_CLK_LBN (30)
-#define GPIO_USE_NIC_CLK_WIDTH (1)
-#define GPIO_OUTPUTS_LBN   (16)
-#define GPIO_OUTPUTS_WIDTH (4)
-#define GPIO_INPUTS_LBN (8)
-#define GPIO_DIRECTION_LBN (24)
-#define GPIO_DIRECTION_WIDTH (4)
-#define GPIO_DIRECTION_OUT (1)
-#define GPIO_SRAM_SLEEP (1 << 1)
-
-#define GPIO3_OEN_LBN (GPIO_DIRECTION_LBN + 3)
-#define	GPIO3_OEN_WIDTH 1
-#define	GPIO2_OEN_LBN (GPIO_DIRECTION_LBN + 2)
-#define	GPIO2_OEN_WIDTH 1
-#define	GPIO1_OEN_LBN (GPIO_DIRECTION_LBN + 1)
-#define	GPIO1_OEN_WIDTH 1
-#define GPIO0_OEN_LBN (GPIO_DIRECTION_LBN + 0)
-#define	GPIO0_OEN_WIDTH 1
-
-#define	GPIO3_OUT_LBN (GPIO_OUTPUTS_LBN + 3)
-#define	GPIO3_OUT_WIDTH 1
-#define	GPIO2_OUT_LBN (GPIO_OUTPUTS_LBN + 2)
-#define	GPIO2_OUT_WIDTH 1
-#define	GPIO1_OUT_LBN (GPIO_OUTPUTS_LBN + 1)
-#define	GPIO1_OUT_WIDTH 1
-#define	GPIO0_OUT_LBN (GPIO_OUTPUTS_LBN + 0)
-#define	GPIO0_OUT_WIDTH 1
-
-#define GPIO3_IN_LBN (GPIO_INPUTS_LBN + 3)
-#define	GPIO3_IN_WIDTH 1
-#define	GPIO2_IN_WIDTH 1
-#define	GPIO1_IN_WIDTH 1
-#define GPIO0_IN_LBN (GPIO_INPUTS_LBN + 0)
-#define	GPIO0_IN_WIDTH 1
-
-/* Global control register */
-#define GLB_CTL_REG_KER	0x0220
-#define EXT_PHY_RST_CTL_LBN 63
-#define EXT_PHY_RST_CTL_WIDTH 1
-#define PCIE_SD_RST_CTL_LBN 61
-#define PCIE_SD_RST_CTL_WIDTH 1
-
-#define PCIE_NSTCK_RST_CTL_LBN 58
-#define PCIE_NSTCK_RST_CTL_WIDTH 1
-#define PCIE_CORE_RST_CTL_LBN 57
-#define PCIE_CORE_RST_CTL_WIDTH 1
-#define EE_RST_CTL_LBN 49
-#define EE_RST_CTL_WIDTH 1
-#define RST_XGRX_LBN 24
-#define RST_XGRX_WIDTH 1
-#define RST_XGTX_LBN 23
-#define RST_XGTX_WIDTH 1
-#define RST_EM_LBN 22
-#define RST_EM_WIDTH 1
-#define EXT_PHY_RST_DUR_LBN 1
-#define EXT_PHY_RST_DUR_WIDTH 3
-#define SWRST_LBN 0
-#define SWRST_WIDTH 1
-#define INCLUDE_IN_RESET 0
-#define EXCLUDE_FROM_RESET 1
-
-/* Fatal interrupt register */
-#define FATAL_INTR_REG_KER 0x0230
-#define RBUF_OWN_INT_KER_EN_LBN 39
-#define RBUF_OWN_INT_KER_EN_WIDTH 1
-#define TBUF_OWN_INT_KER_EN_LBN 38
-#define TBUF_OWN_INT_KER_EN_WIDTH 1
-#define ILL_ADR_INT_KER_EN_LBN 33
-#define ILL_ADR_INT_KER_EN_WIDTH 1
-#define MEM_PERR_INT_KER_LBN 8
-#define MEM_PERR_INT_KER_WIDTH 1
-#define INT_KER_ERROR_LBN 0
-#define INT_KER_ERROR_WIDTH 12
-
-#define DP_CTRL_REG 0x250
-#define FLS_EVQ_ID_LBN 0
-#define FLS_EVQ_ID_WIDTH 11
-
-#define MEM_STAT_REG_KER 0x260
-
-/* Debug probe register */
-#define DEBUG_BLK_SEL_MISC 7
-#define DEBUG_BLK_SEL_SERDES 6
-#define DEBUG_BLK_SEL_EM 5
-#define DEBUG_BLK_SEL_SR 4
-#define DEBUG_BLK_SEL_EV 3
-#define DEBUG_BLK_SEL_RX 2
-#define DEBUG_BLK_SEL_TX 1
-#define DEBUG_BLK_SEL_BIU 0
-
-/* FPGA build version */
-#define ALTERA_BUILD_REG_KER 0x0300
-#define VER_ALL_LBN 0
-#define VER_ALL_WIDTH 32
-
-/* Spare EEPROM bits register (flash 0x390) */
-#define SPARE_REG_KER 0x310
-#define MEM_PERR_EN_TX_DATA_LBN 72
-#define MEM_PERR_EN_TX_DATA_WIDTH 2
-
-/* Timer table for kernel access */
-#define TIMER_CMD_REG_KER 0x420
-#define TIMER_MODE_LBN 12
-#define TIMER_MODE_WIDTH 2
-#define TIMER_MODE_DIS 0
-#define TIMER_MODE_INT_HLDOFF 2
-#define TIMER_VAL_LBN 0
-#define TIMER_VAL_WIDTH 12
-
-/* Driver generated event register */
-#define DRV_EV_REG_KER 0x440
-#define DRV_EV_QID_LBN 64
-#define DRV_EV_QID_WIDTH 12
-#define DRV_EV_DATA_LBN 0
-#define DRV_EV_DATA_WIDTH 64
-
-/* Buffer table configuration register */
-#define BUF_TBL_CFG_REG_KER 0x600
-#define BUF_TBL_MODE_LBN 3
-#define BUF_TBL_MODE_WIDTH 1
-#define BUF_TBL_MODE_HALF 0
-#define BUF_TBL_MODE_FULL 1
-
-/* SRAM receive descriptor cache configuration register */
-#define SRM_RX_DC_CFG_REG_KER 0x610
-#define SRM_RX_DC_BASE_ADR_LBN 0
-#define SRM_RX_DC_BASE_ADR_WIDTH 21
-
-/* SRAM transmit descriptor cache configuration register */
-#define SRM_TX_DC_CFG_REG_KER 0x620
-#define SRM_TX_DC_BASE_ADR_LBN 0
-#define SRM_TX_DC_BASE_ADR_WIDTH 21
-
-/* SRAM configuration register */
-#define SRM_CFG_REG_KER 0x630
-#define SRAM_OOB_BT_INIT_EN_LBN 3
-#define SRAM_OOB_BT_INIT_EN_WIDTH 1
-#define SRM_NUM_BANKS_AND_BANK_SIZE_LBN 0
-#define SRM_NUM_BANKS_AND_BANK_SIZE_WIDTH 3
-#define SRM_NB_BSZ_1BANKS_2M 0
-#define SRM_NB_BSZ_1BANKS_4M 1
-#define SRM_NB_BSZ_1BANKS_8M 2
-#define SRM_NB_BSZ_DEFAULT 3 /* char driver will set the default */
-#define SRM_NB_BSZ_2BANKS_4M 4
-#define SRM_NB_BSZ_2BANKS_8M 5
-#define SRM_NB_BSZ_2BANKS_16M 6
-#define SRM_NB_BSZ_RESERVED 7
-
-/* Special buffer table update register */
-#define BUF_TBL_UPD_REG_KER 0x0650
-#define BUF_UPD_CMD_LBN 63
-#define BUF_UPD_CMD_WIDTH 1
-#define BUF_CLR_CMD_LBN 62
-#define BUF_CLR_CMD_WIDTH 1
-#define BUF_CLR_END_ID_LBN 32
-#define BUF_CLR_END_ID_WIDTH 20
-#define BUF_CLR_START_ID_LBN 0
-#define BUF_CLR_START_ID_WIDTH 20
-
-/* Receive configuration register */
-#define RX_CFG_REG_KER 0x800
-
-/* B0 */
-#define RX_INGR_EN_B0_LBN 47
-#define RX_INGR_EN_B0_WIDTH 1
-#define RX_DESC_PUSH_EN_B0_LBN 43
-#define RX_DESC_PUSH_EN_B0_WIDTH 1
-#define RX_XON_TX_TH_B0_LBN 33
-#define RX_XON_TX_TH_B0_WIDTH 5
-#define RX_XOFF_TX_TH_B0_LBN 28
-#define RX_XOFF_TX_TH_B0_WIDTH 5
-#define RX_USR_BUF_SIZE_B0_LBN 19
-#define RX_USR_BUF_SIZE_B0_WIDTH 9
-#define RX_XON_MAC_TH_B0_LBN 10
-#define RX_XON_MAC_TH_B0_WIDTH 9
-#define RX_XOFF_MAC_TH_B0_LBN 1
-#define RX_XOFF_MAC_TH_B0_WIDTH 9
-#define RX_XOFF_MAC_EN_B0_LBN 0
-#define RX_XOFF_MAC_EN_B0_WIDTH 1
-
-/* A1 */
-#define RX_DESC_PUSH_EN_A1_LBN 35
-#define RX_DESC_PUSH_EN_A1_WIDTH 1
-#define RX_XON_TX_TH_A1_LBN 25
-#define RX_XON_TX_TH_A1_WIDTH 5
-#define RX_XOFF_TX_TH_A1_LBN 20
-#define RX_XOFF_TX_TH_A1_WIDTH 5
-#define RX_USR_BUF_SIZE_A1_LBN 11
-#define RX_USR_BUF_SIZE_A1_WIDTH 9
-#define RX_XON_MAC_TH_A1_LBN 6
-#define RX_XON_MAC_TH_A1_WIDTH 5
-#define RX_XOFF_MAC_TH_A1_LBN 1
-#define RX_XOFF_MAC_TH_A1_WIDTH 5
-#define RX_XOFF_MAC_EN_A1_LBN 0
-#define RX_XOFF_MAC_EN_A1_WIDTH 1
-
-/* Receive filter control register */
-#define RX_FILTER_CTL_REG 0x810
-#define UDP_FULL_SRCH_LIMIT_LBN 32
-#define UDP_FULL_SRCH_LIMIT_WIDTH 8
-#define NUM_KER_LBN 24
-#define NUM_KER_WIDTH 2
-#define UDP_WILD_SRCH_LIMIT_LBN 16
-#define UDP_WILD_SRCH_LIMIT_WIDTH 8
-#define TCP_WILD_SRCH_LIMIT_LBN 8
-#define TCP_WILD_SRCH_LIMIT_WIDTH 8
-#define TCP_FULL_SRCH_LIMIT_LBN 0
-#define TCP_FULL_SRCH_LIMIT_WIDTH 8
-
-/* RX queue flush register */
-#define RX_FLUSH_DESCQ_REG_KER 0x0820
-#define RX_FLUSH_DESCQ_CMD_LBN 24
-#define RX_FLUSH_DESCQ_CMD_WIDTH 1
-#define RX_FLUSH_DESCQ_LBN 0
-#define RX_FLUSH_DESCQ_WIDTH 12
-
-/* Receive descriptor update register */
-#define RX_DESC_UPD_REG_KER_DWORD (0x830 + 12)
-#define RX_DESC_WPTR_DWORD_LBN 0
-#define RX_DESC_WPTR_DWORD_WIDTH 12
-
-/* Receive descriptor cache configuration register */
-#define RX_DC_CFG_REG_KER 0x840
-#define RX_DC_SIZE_LBN 0
-#define RX_DC_SIZE_WIDTH 2
-
-#define RX_DC_PF_WM_REG_KER 0x850
-#define RX_DC_PF_LWM_LBN 0
-#define RX_DC_PF_LWM_WIDTH 6
-
-/* RX no descriptor drop counter */
-#define RX_NODESC_DROP_REG_KER 0x880
-#define RX_NODESC_DROP_CNT_LBN 0
-#define RX_NODESC_DROP_CNT_WIDTH 16
-
-/* RX black magic register */
-#define RX_SELF_RST_REG_KER 0x890
-#define RX_ISCSI_DIS_LBN 17
-#define RX_ISCSI_DIS_WIDTH 1
-#define RX_NODESC_WAIT_DIS_LBN 9
-#define RX_NODESC_WAIT_DIS_WIDTH 1
-#define RX_RECOVERY_EN_LBN 8
-#define RX_RECOVERY_EN_WIDTH 1
-
-/* TX queue flush register */
-#define TX_FLUSH_DESCQ_REG_KER 0x0a00
-#define TX_FLUSH_DESCQ_CMD_LBN 12
-#define TX_FLUSH_DESCQ_CMD_WIDTH 1
-#define TX_FLUSH_DESCQ_LBN 0
-#define TX_FLUSH_DESCQ_WIDTH 12
-
-/* Transmit descriptor update register */
-#define TX_DESC_UPD_REG_KER_DWORD (0xa10 + 12)
-#define TX_DESC_WPTR_DWORD_LBN 0
-#define TX_DESC_WPTR_DWORD_WIDTH 12
-
-/* Transmit descriptor cache configuration register */
-#define TX_DC_CFG_REG_KER 0xa20
-#define TX_DC_SIZE_LBN 0
-#define TX_DC_SIZE_WIDTH 2
-
-/* Transmit checksum configuration register (A0/A1 only) */
-#define TX_CHKSM_CFG_REG_KER_A1 0xa30
-
-/* Transmit configuration register */
-#define TX_CFG_REG_KER 0xa50
-#define TX_NO_EOP_DISC_EN_LBN 5
-#define TX_NO_EOP_DISC_EN_WIDTH 1
-
-/* Transmit configuration register 2 */
-#define TX_CFG2_REG_KER 0xa80
-#define TX_CSR_PUSH_EN_LBN 89
-#define TX_CSR_PUSH_EN_WIDTH 1
-#define TX_RX_SPACER_LBN 64
-#define TX_RX_SPACER_WIDTH 8
-#define TX_SW_EV_EN_LBN 59
-#define TX_SW_EV_EN_WIDTH 1
-#define TX_RX_SPACER_EN_LBN 57
-#define TX_RX_SPACER_EN_WIDTH 1
-#define TX_PREF_THRESHOLD_LBN 19
-#define TX_PREF_THRESHOLD_WIDTH 2
-#define TX_ONE_PKT_PER_Q_LBN 18
-#define TX_ONE_PKT_PER_Q_WIDTH 1
-#define TX_DIS_NON_IP_EV_LBN 17
-#define TX_DIS_NON_IP_EV_WIDTH 1
-#define TX_FLUSH_MIN_LEN_EN_B0_LBN 7
-#define TX_FLUSH_MIN_LEN_EN_B0_WIDTH 1
-
-/* PHY management transmit data register */
-#define MD_TXD_REG_KER 0xc00
-#define MD_TXD_LBN 0
-#define MD_TXD_WIDTH 16
-
-/* PHY management receive data register */
-#define MD_RXD_REG_KER 0xc10
-#define MD_RXD_LBN 0
-#define MD_RXD_WIDTH 16
-
-/* PHY management configuration & status register */
-#define MD_CS_REG_KER 0xc20
-#define MD_GC_LBN 4
-#define MD_GC_WIDTH 1
-#define MD_RIC_LBN 2
-#define MD_RIC_WIDTH 1
-#define MD_RDC_LBN 1
-#define MD_RDC_WIDTH 1
-#define MD_WRC_LBN 0
-#define MD_WRC_WIDTH 1
-
-/* PHY management PHY address register */
-#define MD_PHY_ADR_REG_KER 0xc30
-#define MD_PHY_ADR_LBN 0
-#define MD_PHY_ADR_WIDTH 16
-
-/* PHY management ID register */
-#define MD_ID_REG_KER 0xc40
-#define MD_PRT_ADR_LBN 11
-#define MD_PRT_ADR_WIDTH 5
-#define MD_DEV_ADR_LBN 6
-#define MD_DEV_ADR_WIDTH 5
-
-/* PHY management status & mask register (DWORD read only) */
-#define MD_STAT_REG_KER 0xc50
-#define MD_BSERR_LBN 2
-#define MD_BSERR_WIDTH 1
-#define MD_LNFL_LBN 1
-#define MD_LNFL_WIDTH 1
-#define MD_BSY_LBN 0
-#define MD_BSY_WIDTH 1
-
-/* Port 0 and 1 MAC stats registers */
-#define MAC0_STAT_DMA_REG_KER 0xc60
-#define MAC_STAT_DMA_CMD_LBN 48
-#define MAC_STAT_DMA_CMD_WIDTH 1
-#define MAC_STAT_DMA_ADR_LBN 0
-#define MAC_STAT_DMA_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/* Port 0 and 1 MAC control registers */
-#define MAC0_CTRL_REG_KER 0xc80
-#define MAC_XOFF_VAL_LBN 16
-#define MAC_XOFF_VAL_WIDTH 16
-#define TXFIFO_DRAIN_EN_B0_LBN 7
-#define TXFIFO_DRAIN_EN_B0_WIDTH 1
-#define MAC_BCAD_ACPT_LBN 4
-#define MAC_BCAD_ACPT_WIDTH 1
-#define MAC_UC_PROM_LBN 3
-#define MAC_UC_PROM_WIDTH 1
-#define MAC_LINK_STATUS_LBN 2
-#define MAC_LINK_STATUS_WIDTH 1
-#define MAC_SPEED_LBN 0
-#define MAC_SPEED_WIDTH 2
-
-/* 10G XAUI XGXS default values */
-#define XX_TXDRV_DEQ_DEFAULT 0xe /* deq=.6 */
-#define XX_TXDRV_DTX_DEFAULT 0x5 /* 1.25 */
-#define XX_SD_CTL_DRV_DEFAULT 0  /* 20mA */
-
-/* Multicast address hash table */
-#define MAC_MCAST_HASH_REG0_KER 0xca0
-#define MAC_MCAST_HASH_REG1_KER 0xcb0
-
-/* GMAC configuration register 1 */
-#define GM_CFG1_REG 0xe00
-#define GM_SW_RST_LBN 31
-#define GM_SW_RST_WIDTH 1
-#define GM_LOOP_LBN 8
-#define GM_LOOP_WIDTH 1
-#define GM_RX_FC_EN_LBN 5
-#define GM_RX_FC_EN_WIDTH 1
-#define GM_TX_FC_EN_LBN 4
-#define GM_TX_FC_EN_WIDTH 1
-#define GM_RX_EN_LBN 2
-#define GM_RX_EN_WIDTH 1
-#define GM_TX_EN_LBN 0
-#define GM_TX_EN_WIDTH 1
-
-/* GMAC configuration register 2 */
-#define GM_CFG2_REG 0xe10
-#define GM_PAMBL_LEN_LBN 12
-#define GM_PAMBL_LEN_WIDTH 4
-#define GM_IF_MODE_LBN 8
-#define GM_IF_MODE_WIDTH 2
-#define GM_LEN_CHK_LBN 4
-#define GM_LEN_CHK_WIDTH 1
-#define GM_PAD_CRC_EN_LBN 2
-#define GM_PAD_CRC_EN_WIDTH 1
-#define GM_FD_LBN 0
-#define GM_FD_WIDTH 1
-
-/* GMAC maximum frame length register */
-#define GM_MAX_FLEN_REG 0xe40
-#define GM_MAX_FLEN_LBN 0
-#define GM_MAX_FLEN_WIDTH 16
-
-/* GMAC station address register 1 */
-#define GM_ADR1_REG 0xf00
-#define GM_HWADDR_5_LBN 24
-#define GM_HWADDR_5_WIDTH 8
-#define GM_HWADDR_4_LBN 16
-#define GM_HWADDR_4_WIDTH 8
-#define GM_HWADDR_3_LBN 8
-#define GM_HWADDR_3_WIDTH 8
-#define GM_HWADDR_2_LBN 0
-#define GM_HWADDR_2_WIDTH 8
-
-/* GMAC station address register 2 */
-#define GM_ADR2_REG 0xf10
-#define GM_HWADDR_1_LBN 24
-#define GM_HWADDR_1_WIDTH 8
-#define GM_HWADDR_0_LBN 16
-#define GM_HWADDR_0_WIDTH 8
-
-/* GMAC FIFO configuration register 0 */
-#define GMF_CFG0_REG 0xf20
-#define GMF_FTFENREQ_LBN 12
-#define GMF_FTFENREQ_WIDTH 1
-#define GMF_STFENREQ_LBN 11
-#define GMF_STFENREQ_WIDTH 1
-#define GMF_FRFENREQ_LBN 10
-#define GMF_FRFENREQ_WIDTH 1
-#define GMF_SRFENREQ_LBN 9
-#define GMF_SRFENREQ_WIDTH 1
-#define GMF_WTMENREQ_LBN 8
-#define GMF_WTMENREQ_WIDTH 1
-
-/* GMAC FIFO configuration register 1 */
-#define GMF_CFG1_REG 0xf30
-#define GMF_CFGFRTH_LBN 16
-#define GMF_CFGFRTH_WIDTH 5
-#define GMF_CFGXOFFRTX_LBN 0
-#define GMF_CFGXOFFRTX_WIDTH 16
-
-/* GMAC FIFO configuration register 2 */
-#define GMF_CFG2_REG 0xf40
-#define GMF_CFGHWM_LBN 16
-#define GMF_CFGHWM_WIDTH 6
-#define GMF_CFGLWM_LBN 0
-#define GMF_CFGLWM_WIDTH 6
-
-/* GMAC FIFO configuration register 3 */
-#define GMF_CFG3_REG 0xf50
-#define GMF_CFGHWMFT_LBN 16
-#define GMF_CFGHWMFT_WIDTH 6
-#define GMF_CFGFTTH_LBN 0
-#define GMF_CFGFTTH_WIDTH 6
-
-/* GMAC FIFO configuration register 4 */
-#define GMF_CFG4_REG 0xf60
-#define GMF_HSTFLTRFRM_PAUSE_LBN 12
-#define GMF_HSTFLTRFRM_PAUSE_WIDTH 12
-
-/* GMAC FIFO configuration register 5 */
-#define GMF_CFG5_REG 0xf70
-#define GMF_CFGHDPLX_LBN 22
-#define GMF_CFGHDPLX_WIDTH 1
-#define GMF_CFGBYTMODE_LBN 19
-#define GMF_CFGBYTMODE_WIDTH 1
-#define GMF_HSTDRPLT64_LBN 18
-#define GMF_HSTDRPLT64_WIDTH 1
-#define GMF_HSTFLTRFRMDC_PAUSE_LBN 12
-#define GMF_HSTFLTRFRMDC_PAUSE_WIDTH 1
-
-/* XGMAC address register low */
-#define XM_ADR_LO_REG 0x1200
-#define XM_ADR_3_LBN 24
-#define XM_ADR_3_WIDTH 8
-#define XM_ADR_2_LBN 16
-#define XM_ADR_2_WIDTH 8
-#define XM_ADR_1_LBN 8
-#define XM_ADR_1_WIDTH 8
-#define XM_ADR_0_LBN 0
-#define XM_ADR_0_WIDTH 8
-
-/* XGMAC address register high */
-#define XM_ADR_HI_REG 0x1210
-#define XM_ADR_5_LBN 8
-#define XM_ADR_5_WIDTH 8
-#define XM_ADR_4_LBN 0
-#define XM_ADR_4_WIDTH 8
-
-/* XGMAC global configuration */
-#define XM_GLB_CFG_REG 0x1220
-#define XM_RX_STAT_EN_LBN 11
-#define XM_RX_STAT_EN_WIDTH 1
-#define XM_TX_STAT_EN_LBN 10
-#define XM_TX_STAT_EN_WIDTH 1
-#define XM_RX_JUMBO_MODE_LBN 6
-#define XM_RX_JUMBO_MODE_WIDTH 1
-#define XM_INTCLR_MODE_LBN 3
-#define XM_INTCLR_MODE_WIDTH 1
-#define XM_CORE_RST_LBN 0
-#define XM_CORE_RST_WIDTH 1
-
-/* XGMAC transmit configuration */
-#define XM_TX_CFG_REG 0x1230
-#define XM_IPG_LBN 16
-#define XM_IPG_WIDTH 4
-#define XM_FCNTL_LBN 10
-#define XM_FCNTL_WIDTH 1
-#define XM_TXCRC_LBN 8
-#define XM_TXCRC_WIDTH 1
-#define XM_AUTO_PAD_LBN 5
-#define XM_AUTO_PAD_WIDTH 1
-#define XM_TX_PRMBL_LBN 2
-#define XM_TX_PRMBL_WIDTH 1
-#define XM_TXEN_LBN 1
-#define XM_TXEN_WIDTH 1
-
-/* XGMAC receive configuration */
-#define XM_RX_CFG_REG 0x1240
-#define XM_PASS_CRC_ERR_LBN 25
-#define XM_PASS_CRC_ERR_WIDTH 1
-#define XM_ACPT_ALL_MCAST_LBN 11
-#define XM_ACPT_ALL_MCAST_WIDTH 1
-#define XM_ACPT_ALL_UCAST_LBN 9
-#define XM_ACPT_ALL_UCAST_WIDTH 1
-#define XM_AUTO_DEPAD_LBN 8
-#define XM_AUTO_DEPAD_WIDTH 1
-#define XM_RXEN_LBN 1
-#define XM_RXEN_WIDTH 1
-
-/* XGMAC management interrupt mask register */
-#define XM_MGT_INT_MSK_REG_B0 0x1250
-#define XM_MSK_PRMBLE_ERR_LBN 2
-#define XM_MSK_PRMBLE_ERR_WIDTH 1
-#define XM_MSK_RMTFLT_LBN 1
-#define XM_MSK_RMTFLT_WIDTH 1
-#define XM_MSK_LCLFLT_LBN 0
-#define XM_MSK_LCLFLT_WIDTH 1
-
-/* XGMAC flow control register */
-#define XM_FC_REG 0x1270
-#define XM_PAUSE_TIME_LBN 16
-#define XM_PAUSE_TIME_WIDTH 16
-#define XM_DIS_FCNTL_LBN 0
-#define XM_DIS_FCNTL_WIDTH 1
-
-/* XGMAC pause time count register */
-#define XM_PAUSE_TIME_REG 0x1290
-
-/* XGMAC transmit parameter register */
-#define XM_TX_PARAM_REG 0x012d0
-#define XM_TX_JUMBO_MODE_LBN 31
-#define XM_TX_JUMBO_MODE_WIDTH 1
-#define XM_MAX_TX_FRM_SIZE_LBN 16
-#define XM_MAX_TX_FRM_SIZE_WIDTH 14
-
-/* XGMAC receive parameter register */
-#define XM_RX_PARAM_REG 0x12e0
-#define XM_MAX_RX_FRM_SIZE_LBN 0
-#define XM_MAX_RX_FRM_SIZE_WIDTH 14
-
-/* XGMAC management interrupt status register */
-#define XM_MGT_INT_REG_B0 0x12f0
-#define XM_PRMBLE_ERR 2
-#define XM_PRMBLE_WIDTH 1
-#define XM_RMTFLT_LBN 1
-#define XM_RMTFLT_WIDTH 1
-#define XM_LCLFLT_LBN 0
-#define XM_LCLFLT_WIDTH 1
-
-/* XGXS/XAUI powerdown/reset register */
-#define XX_PWR_RST_REG 0x1300
-
-#define XX_SD_RST_ACT_LBN 16
-#define XX_SD_RST_ACT_WIDTH 1
-#define XX_PWRDND_EN_LBN 15
-#define XX_PWRDND_EN_WIDTH 1
-#define XX_PWRDNC_EN_LBN 14
-#define XX_PWRDNC_EN_WIDTH 1
-#define XX_PWRDNB_EN_LBN 13
-#define XX_PWRDNB_EN_WIDTH 1
-#define XX_PWRDNA_EN_LBN 12
-#define XX_PWRDNA_EN_WIDTH 1
-#define XX_RSTPLLCD_EN_LBN 9
-#define XX_RSTPLLCD_EN_WIDTH 1
-#define XX_RSTPLLAB_EN_LBN 8
-#define XX_RSTPLLAB_EN_WIDTH 1
-#define XX_RESETD_EN_LBN 7
-#define XX_RESETD_EN_WIDTH 1
-#define XX_RESETC_EN_LBN 6
-#define XX_RESETC_EN_WIDTH 1
-#define XX_RESETB_EN_LBN 5
-#define XX_RESETB_EN_WIDTH 1
-#define XX_RESETA_EN_LBN 4
-#define XX_RESETA_EN_WIDTH 1
-#define XX_RSTXGXSRX_EN_LBN 2
-#define XX_RSTXGXSRX_EN_WIDTH 1
-#define XX_RSTXGXSTX_EN_LBN 1
-#define XX_RSTXGXSTX_EN_WIDTH 1
-#define XX_RST_XX_EN_LBN 0
-#define XX_RST_XX_EN_WIDTH 1
-
-/* XGXS/XAUI powerdown/reset control register */
-#define XX_SD_CTL_REG 0x1310
-#define XX_HIDRVD_LBN 15
-#define XX_HIDRVD_WIDTH 1
-#define XX_LODRVD_LBN 14
-#define XX_LODRVD_WIDTH 1
-#define XX_HIDRVC_LBN 13
-#define XX_HIDRVC_WIDTH 1
-#define XX_LODRVC_LBN 12
-#define XX_LODRVC_WIDTH 1
-#define XX_HIDRVB_LBN 11
-#define XX_HIDRVB_WIDTH 1
-#define XX_LODRVB_LBN 10
-#define XX_LODRVB_WIDTH 1
-#define XX_HIDRVA_LBN 9
-#define XX_HIDRVA_WIDTH 1
-#define XX_LODRVA_LBN 8
-#define XX_LODRVA_WIDTH 1
-#define XX_LPBKD_LBN 3
-#define XX_LPBKD_WIDTH 1
-#define XX_LPBKC_LBN 2
-#define XX_LPBKC_WIDTH 1
-#define XX_LPBKB_LBN 1
-#define XX_LPBKB_WIDTH 1
-#define XX_LPBKA_LBN 0
-#define XX_LPBKA_WIDTH 1
-
-#define XX_TXDRV_CTL_REG 0x1320
-#define XX_DEQD_LBN 28
-#define XX_DEQD_WIDTH 4
-#define XX_DEQC_LBN 24
-#define XX_DEQC_WIDTH 4
-#define XX_DEQB_LBN 20
-#define XX_DEQB_WIDTH 4
-#define XX_DEQA_LBN 16
-#define XX_DEQA_WIDTH 4
-#define XX_DTXD_LBN 12
-#define XX_DTXD_WIDTH 4
-#define XX_DTXC_LBN 8
-#define XX_DTXC_WIDTH 4
-#define XX_DTXB_LBN 4
-#define XX_DTXB_WIDTH 4
-#define XX_DTXA_LBN 0
-#define XX_DTXA_WIDTH 4
-
-/* XAUI XGXS core status register */
-#define XX_CORE_STAT_REG 0x1360
-#define XX_FORCE_SIG_LBN 24
-#define XX_FORCE_SIG_WIDTH 8
-#define XX_FORCE_SIG_DECODE_FORCED 0xff
-#define XX_XGXS_LB_EN_LBN 23
-#define XX_XGXS_LB_EN_WIDTH 1
-#define XX_XGMII_LB_EN_LBN 22
-#define XX_XGMII_LB_EN_WIDTH 1
-#define XX_ALIGN_DONE_LBN 20
-#define XX_ALIGN_DONE_WIDTH 1
-#define XX_SYNC_STAT_LBN 16
-#define XX_SYNC_STAT_WIDTH 4
-#define XX_SYNC_STAT_DECODE_SYNCED 0xf
-#define XX_COMMA_DET_LBN 12
-#define XX_COMMA_DET_WIDTH 4
-#define XX_COMMA_DET_DECODE_DETECTED 0xf
-#define XX_COMMA_DET_RESET 0xf
-#define XX_CHARERR_LBN 4
-#define XX_CHARERR_WIDTH 4
-#define XX_CHARERR_RESET 0xf
-#define XX_DISPERR_LBN 0
-#define XX_DISPERR_WIDTH 4
-#define XX_DISPERR_RESET 0xf
-
-/* Receive filter table */
-#define RX_FILTER_TBL0 0xF00000
-
-/* Receive descriptor pointer table */
-#define RX_DESC_PTR_TBL_KER_A1 0x11800
-#define RX_DESC_PTR_TBL_KER_B0 0xF40000
-#define RX_DESC_PTR_TBL_KER_P0 0x900
-#define RX_ISCSI_DDIG_EN_LBN 88
-#define RX_ISCSI_DDIG_EN_WIDTH 1
-#define RX_ISCSI_HDIG_EN_LBN 87
-#define RX_ISCSI_HDIG_EN_WIDTH 1
-#define RX_DESCQ_BUF_BASE_ID_LBN 36
-#define RX_DESCQ_BUF_BASE_ID_WIDTH 20
-#define RX_DESCQ_EVQ_ID_LBN 24
-#define RX_DESCQ_EVQ_ID_WIDTH 12
-#define RX_DESCQ_OWNER_ID_LBN 10
-#define RX_DESCQ_OWNER_ID_WIDTH 14
-#define RX_DESCQ_LABEL_LBN 5
-#define RX_DESCQ_LABEL_WIDTH 5
-#define RX_DESCQ_SIZE_LBN 3
-#define RX_DESCQ_SIZE_WIDTH 2
-#define RX_DESCQ_SIZE_4K 3
-#define RX_DESCQ_SIZE_2K 2
-#define RX_DESCQ_SIZE_1K 1
-#define RX_DESCQ_SIZE_512 0
-#define RX_DESCQ_TYPE_LBN 2
-#define RX_DESCQ_TYPE_WIDTH 1
-#define RX_DESCQ_JUMBO_LBN 1
-#define RX_DESCQ_JUMBO_WIDTH 1
-#define RX_DESCQ_EN_LBN 0
-#define RX_DESCQ_EN_WIDTH 1
-
-/* Transmit descriptor pointer table */
-#define TX_DESC_PTR_TBL_KER_A1 0x11900
-#define TX_DESC_PTR_TBL_KER_B0 0xF50000
-#define TX_DESC_PTR_TBL_KER_P0 0xa40
-#define TX_NON_IP_DROP_DIS_B0_LBN 91
-#define TX_NON_IP_DROP_DIS_B0_WIDTH 1
-#define TX_IP_CHKSM_DIS_B0_LBN 90
-#define TX_IP_CHKSM_DIS_B0_WIDTH 1
-#define TX_TCP_CHKSM_DIS_B0_LBN 89
-#define TX_TCP_CHKSM_DIS_B0_WIDTH 1
-#define TX_DESCQ_EN_LBN 88
-#define TX_DESCQ_EN_WIDTH 1
-#define TX_ISCSI_DDIG_EN_LBN 87
-#define TX_ISCSI_DDIG_EN_WIDTH 1
-#define TX_ISCSI_HDIG_EN_LBN 86
-#define TX_ISCSI_HDIG_EN_WIDTH 1
-#define TX_DESCQ_BUF_BASE_ID_LBN 36
-#define TX_DESCQ_BUF_BASE_ID_WIDTH 20
-#define TX_DESCQ_EVQ_ID_LBN 24
-#define TX_DESCQ_EVQ_ID_WIDTH 12
-#define TX_DESCQ_OWNER_ID_LBN 10
-#define TX_DESCQ_OWNER_ID_WIDTH 14
-#define TX_DESCQ_LABEL_LBN 5
-#define TX_DESCQ_LABEL_WIDTH 5
-#define TX_DESCQ_SIZE_LBN 3
-#define TX_DESCQ_SIZE_WIDTH 2
-#define TX_DESCQ_SIZE_4K 3
-#define TX_DESCQ_SIZE_2K 2
-#define TX_DESCQ_SIZE_1K 1
-#define TX_DESCQ_SIZE_512 0
-#define TX_DESCQ_TYPE_LBN 1
-#define TX_DESCQ_TYPE_WIDTH 2
-
-/* Event queue pointer */
-#define EVQ_PTR_TBL_KER_A1 0x11a00
-#define EVQ_PTR_TBL_KER_B0 0xf60000
-#define EVQ_PTR_TBL_KER_P0 0x500
-#define EVQ_EN_LBN 23
-#define EVQ_EN_WIDTH 1
-#define EVQ_SIZE_LBN 20
-#define EVQ_SIZE_WIDTH 3
-#define EVQ_SIZE_32K 6
-#define EVQ_SIZE_16K 5
-#define EVQ_SIZE_8K 4
-#define EVQ_SIZE_4K 3
-#define EVQ_SIZE_2K 2
-#define EVQ_SIZE_1K 1
-#define EVQ_SIZE_512 0
-#define EVQ_BUF_BASE_ID_LBN 0
-#define EVQ_BUF_BASE_ID_WIDTH 20
-
-/* Event queue read pointer */
-#define EVQ_RPTR_REG_KER_A1 0x11b00
-#define EVQ_RPTR_REG_KER_B0 0xfa0000
-#define EVQ_RPTR_REG_KER_DWORD (EVQ_RPTR_REG_KER + 0)
-#define EVQ_RPTR_DWORD_LBN 0
-#define EVQ_RPTR_DWORD_WIDTH 14
-
-/* RSS indirection table */
-#define RX_RSS_INDIR_TBL_B0 0xFB0000
-#define RX_RSS_INDIR_ENT_B0_LBN 0
-#define RX_RSS_INDIR_ENT_B0_WIDTH 6
-
-/* Special buffer descriptors (full-mode) */
-#define BUF_FULL_TBL_KER_A1 0x8000
-#define BUF_FULL_TBL_KER_B0 0x800000
-#define IP_DAT_BUF_SIZE_LBN 50
-#define IP_DAT_BUF_SIZE_WIDTH 1
-#define IP_DAT_BUF_SIZE_8K 1
-#define IP_DAT_BUF_SIZE_4K 0
-#define BUF_ADR_REGION_LBN 48
-#define BUF_ADR_REGION_WIDTH 2
-#define BUF_ADR_FBUF_LBN 14
-#define BUF_ADR_FBUF_WIDTH 34
-#define BUF_OWNER_ID_FBUF_LBN 0
-#define BUF_OWNER_ID_FBUF_WIDTH 14
-
-/* Transmit descriptor */
-#define TX_KER_PORT_LBN 63
-#define TX_KER_PORT_WIDTH 1
-#define TX_KER_CONT_LBN 62
-#define TX_KER_CONT_WIDTH 1
-#define TX_KER_BYTE_CNT_LBN 48
-#define TX_KER_BYTE_CNT_WIDTH 14
-#define TX_KER_BUF_REGION_LBN 46
-#define TX_KER_BUF_REGION_WIDTH 2
-#define TX_KER_BUF_REGION0_DECODE 0
-#define TX_KER_BUF_REGION1_DECODE 1
-#define TX_KER_BUF_REGION2_DECODE 2
-#define TX_KER_BUF_REGION3_DECODE 3
-#define TX_KER_BUF_ADR_LBN 0
-#define TX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/* Receive descriptor */
-#define RX_KER_BUF_SIZE_LBN 48
-#define RX_KER_BUF_SIZE_WIDTH 14
-#define RX_KER_BUF_REGION_LBN 46
-#define RX_KER_BUF_REGION_WIDTH 2
-#define RX_KER_BUF_REGION0_DECODE 0
-#define RX_KER_BUF_REGION1_DECODE 1
-#define RX_KER_BUF_REGION2_DECODE 2
-#define RX_KER_BUF_REGION3_DECODE 3
-#define RX_KER_BUF_ADR_LBN 0
-#define RX_KER_BUF_ADR_WIDTH EFX_DMA_TYPE_WIDTH(46)
-
-/**************************************************************************
- *
- * Falcon events
- *
- **************************************************************************
- */
-
-/* Event queue entries */
-#define EV_CODE_LBN 60
-#define EV_CODE_WIDTH 4
-#define RX_IP_EV_DECODE 0
-#define TX_IP_EV_DECODE 2
-#define DRIVER_EV_DECODE 5
-#define GLOBAL_EV_DECODE 6
-#define DRV_GEN_EV_DECODE 7
-#define WHOLE_EVENT_LBN 0
-#define WHOLE_EVENT_WIDTH 64
-
-/* Receive events */
-#define RX_EV_PKT_OK_LBN 56
-#define RX_EV_PKT_OK_WIDTH 1
-#define RX_EV_PAUSE_FRM_ERR_LBN 55
-#define RX_EV_PAUSE_FRM_ERR_WIDTH 1
-#define RX_EV_BUF_OWNER_ID_ERR_LBN 54
-#define RX_EV_BUF_OWNER_ID_ERR_WIDTH 1
-#define RX_EV_IF_FRAG_ERR_LBN 53
-#define RX_EV_IF_FRAG_ERR_WIDTH 1
-#define RX_EV_IP_HDR_CHKSUM_ERR_LBN 52
-#define RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1
-#define RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51
-#define RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1
-#define RX_EV_ETH_CRC_ERR_LBN 50
-#define RX_EV_ETH_CRC_ERR_WIDTH 1
-#define RX_EV_FRM_TRUNC_LBN 49
-#define RX_EV_FRM_TRUNC_WIDTH 1
-#define RX_EV_DRIB_NIB_LBN 48
-#define RX_EV_DRIB_NIB_WIDTH 1
-#define RX_EV_TOBE_DISC_LBN 47
-#define RX_EV_TOBE_DISC_WIDTH 1
-#define RX_EV_PKT_TYPE_LBN 44
-#define RX_EV_PKT_TYPE_WIDTH 3
-#define RX_EV_PKT_TYPE_ETH_DECODE 0
-#define RX_EV_PKT_TYPE_LLC_DECODE 1
-#define RX_EV_PKT_TYPE_JUMBO_DECODE 2
-#define RX_EV_PKT_TYPE_VLAN_DECODE 3
-#define RX_EV_PKT_TYPE_VLAN_LLC_DECODE 4
-#define RX_EV_PKT_TYPE_VLAN_JUMBO_DECODE 5
-#define RX_EV_HDR_TYPE_LBN 42
-#define RX_EV_HDR_TYPE_WIDTH 2
-#define RX_EV_HDR_TYPE_TCP_IPV4_DECODE 0
-#define RX_EV_HDR_TYPE_UDP_IPV4_DECODE 1
-#define RX_EV_HDR_TYPE_OTHER_IP_DECODE 2
-#define RX_EV_HDR_TYPE_NON_IP_DECODE 3
-#define RX_EV_HDR_TYPE_HAS_CHECKSUMS(hdr_type) \
-	((hdr_type) <= RX_EV_HDR_TYPE_UDP_IPV4_DECODE)
-#define RX_EV_MCAST_HASH_MATCH_LBN 40
-#define RX_EV_MCAST_HASH_MATCH_WIDTH 1
-#define RX_EV_MCAST_PKT_LBN 39
-#define RX_EV_MCAST_PKT_WIDTH 1
-#define RX_EV_Q_LABEL_LBN 32
-#define RX_EV_Q_LABEL_WIDTH 5
-#define RX_EV_JUMBO_CONT_LBN 31
-#define RX_EV_JUMBO_CONT_WIDTH 1
-#define RX_EV_BYTE_CNT_LBN 16
-#define RX_EV_BYTE_CNT_WIDTH 14
-#define RX_EV_SOP_LBN 15
-#define RX_EV_SOP_WIDTH 1
-#define RX_EV_DESC_PTR_LBN 0
-#define RX_EV_DESC_PTR_WIDTH 12
-
-/* Transmit events */
-#define TX_EV_PKT_ERR_LBN 38
-#define TX_EV_PKT_ERR_WIDTH 1
-#define TX_EV_Q_LABEL_LBN 32
-#define TX_EV_Q_LABEL_WIDTH 5
-#define TX_EV_WQ_FF_FULL_LBN 15
-#define TX_EV_WQ_FF_FULL_WIDTH 1
-#define TX_EV_COMP_LBN 12
-#define TX_EV_COMP_WIDTH 1
-#define TX_EV_DESC_PTR_LBN 0
-#define TX_EV_DESC_PTR_WIDTH 12
-
-/* Driver events */
-#define DRIVER_EV_SUB_CODE_LBN 56
-#define DRIVER_EV_SUB_CODE_WIDTH 4
-#define DRIVER_EV_SUB_DATA_LBN 0
-#define DRIVER_EV_SUB_DATA_WIDTH 14
-#define TX_DESCQ_FLS_DONE_EV_DECODE 0
-#define RX_DESCQ_FLS_DONE_EV_DECODE 1
-#define EVQ_INIT_DONE_EV_DECODE 2
-#define EVQ_NOT_EN_EV_DECODE 3
-#define RX_DESCQ_FLSFF_OVFL_EV_DECODE 4
-#define SRM_UPD_DONE_EV_DECODE 5
-#define WAKE_UP_EV_DECODE 6
-#define TX_PKT_NON_TCP_UDP_DECODE 9
-#define TIMER_EV_DECODE 10
-#define RX_RECOVERY_EV_DECODE 11
-#define RX_DSC_ERROR_EV_DECODE 14
-#define TX_DSC_ERROR_EV_DECODE 15
-#define DRIVER_EV_TX_DESCQ_ID_LBN 0
-#define DRIVER_EV_TX_DESCQ_ID_WIDTH 12
-#define DRIVER_EV_RX_FLUSH_FAIL_LBN 12
-#define DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1
-#define DRIVER_EV_RX_DESCQ_ID_LBN 0
-#define DRIVER_EV_RX_DESCQ_ID_WIDTH 12
-#define SRM_CLR_EV_DECODE 0
-#define SRM_UPD_EV_DECODE 1
-#define SRM_ILLCLR_EV_DECODE 2
-
-/* Global events */
-#define RX_RECOVERY_B0_LBN 12
-#define RX_RECOVERY_B0_WIDTH 1
-#define XG_MNT_INTR_B0_LBN 11
-#define XG_MNT_INTR_B0_WIDTH 1
-#define RX_RECOVERY_A1_LBN 11
-#define RX_RECOVERY_A1_WIDTH 1
-#define XFP_PHY_INTR_LBN 10
-#define XFP_PHY_INTR_WIDTH 1
-#define XG_PHY_INTR_LBN 9
-#define XG_PHY_INTR_WIDTH 1
-#define G_PHY1_INTR_LBN 8
-#define G_PHY1_INTR_WIDTH 1
-#define G_PHY0_INTR_LBN 7
-#define G_PHY0_INTR_WIDTH 1
-
-/* Driver-generated test events */
-#define EVQ_MAGIC_LBN 0
-#define EVQ_MAGIC_WIDTH 32
-
-/**************************************************************************
- *
- * Falcon MAC stats
- *
- **************************************************************************
- *
- */
-
-#define GRxGoodOct_offset 0x0
-#define GRxGoodOct_WIDTH 48
-#define GRxBadOct_offset 0x8
-#define GRxBadOct_WIDTH 48
-#define GRxMissPkt_offset 0x10
-#define GRxMissPkt_WIDTH 32
-#define GRxFalseCRS_offset 0x14
-#define GRxFalseCRS_WIDTH 32
-#define GRxPausePkt_offset 0x18
-#define GRxPausePkt_WIDTH 32
-#define GRxBadPkt_offset 0x1C
-#define GRxBadPkt_WIDTH 32
-#define GRxUcastPkt_offset 0x20
-#define GRxUcastPkt_WIDTH 32
-#define GRxMcastPkt_offset 0x24
-#define GRxMcastPkt_WIDTH 32
-#define GRxBcastPkt_offset 0x28
-#define GRxBcastPkt_WIDTH 32
-#define GRxGoodLt64Pkt_offset 0x2C
-#define GRxGoodLt64Pkt_WIDTH 32
-#define GRxBadLt64Pkt_offset 0x30
-#define GRxBadLt64Pkt_WIDTH 32
-#define GRx64Pkt_offset 0x34
-#define GRx64Pkt_WIDTH 32
-#define GRx65to127Pkt_offset 0x38
-#define GRx65to127Pkt_WIDTH 32
-#define GRx128to255Pkt_offset 0x3C
-#define GRx128to255Pkt_WIDTH 32
-#define GRx256to511Pkt_offset 0x40
-#define GRx256to511Pkt_WIDTH 32
-#define GRx512to1023Pkt_offset 0x44
-#define GRx512to1023Pkt_WIDTH 32
-#define GRx1024to15xxPkt_offset 0x48
-#define GRx1024to15xxPkt_WIDTH 32
-#define GRx15xxtoJumboPkt_offset 0x4C
-#define GRx15xxtoJumboPkt_WIDTH 32
-#define GRxGtJumboPkt_offset 0x50
-#define GRxGtJumboPkt_WIDTH 32
-#define GRxFcsErr64to15xxPkt_offset 0x54
-#define GRxFcsErr64to15xxPkt_WIDTH 32
-#define GRxFcsErr15xxtoJumboPkt_offset 0x58
-#define GRxFcsErr15xxtoJumboPkt_WIDTH 32
-#define GRxFcsErrGtJumboPkt_offset 0x5C
-#define GRxFcsErrGtJumboPkt_WIDTH 32
-#define GTxGoodBadOct_offset 0x80
-#define GTxGoodBadOct_WIDTH 48
-#define GTxGoodOct_offset 0x88
-#define GTxGoodOct_WIDTH 48
-#define GTxSglColPkt_offset 0x90
-#define GTxSglColPkt_WIDTH 32
-#define GTxMultColPkt_offset 0x94
-#define GTxMultColPkt_WIDTH 32
-#define GTxExColPkt_offset 0x98
-#define GTxExColPkt_WIDTH 32
-#define GTxDefPkt_offset 0x9C
-#define GTxDefPkt_WIDTH 32
-#define GTxLateCol_offset 0xA0
-#define GTxLateCol_WIDTH 32
-#define GTxExDefPkt_offset 0xA4
-#define GTxExDefPkt_WIDTH 32
-#define GTxPausePkt_offset 0xA8
-#define GTxPausePkt_WIDTH 32
-#define GTxBadPkt_offset 0xAC
-#define GTxBadPkt_WIDTH 32
-#define GTxUcastPkt_offset 0xB0
-#define GTxUcastPkt_WIDTH 32
-#define GTxMcastPkt_offset 0xB4
-#define GTxMcastPkt_WIDTH 32
-#define GTxBcastPkt_offset 0xB8
-#define GTxBcastPkt_WIDTH 32
-#define GTxLt64Pkt_offset 0xBC
-#define GTxLt64Pkt_WIDTH 32
-#define GTx64Pkt_offset 0xC0
-#define GTx64Pkt_WIDTH 32
-#define GTx65to127Pkt_offset 0xC4
-#define GTx65to127Pkt_WIDTH 32
-#define GTx128to255Pkt_offset 0xC8
-#define GTx128to255Pkt_WIDTH 32
-#define GTx256to511Pkt_offset 0xCC
-#define GTx256to511Pkt_WIDTH 32
-#define GTx512to1023Pkt_offset 0xD0
-#define GTx512to1023Pkt_WIDTH 32
-#define GTx1024to15xxPkt_offset 0xD4
-#define GTx1024to15xxPkt_WIDTH 32
-#define GTx15xxtoJumboPkt_offset 0xD8
-#define GTx15xxtoJumboPkt_WIDTH 32
-#define GTxGtJumboPkt_offset 0xDC
-#define GTxGtJumboPkt_WIDTH 32
-#define GTxNonTcpUdpPkt_offset 0xE0
-#define GTxNonTcpUdpPkt_WIDTH 16
-#define GTxMacSrcErrPkt_offset 0xE4
-#define GTxMacSrcErrPkt_WIDTH 16
-#define GTxIpSrcErrPkt_offset 0xE8
-#define GTxIpSrcErrPkt_WIDTH 16
-#define GDmaDone_offset 0xEC
-#define GDmaDone_WIDTH 32
-
-#define XgRxOctets_offset 0x0
-#define XgRxOctets_WIDTH 48
-#define XgRxOctetsOK_offset 0x8
-#define XgRxOctetsOK_WIDTH 48
-#define XgRxPkts_offset 0x10
-#define XgRxPkts_WIDTH 32
-#define XgRxPktsOK_offset 0x14
-#define XgRxPktsOK_WIDTH 32
-#define XgRxBroadcastPkts_offset 0x18
-#define XgRxBroadcastPkts_WIDTH 32
-#define XgRxMulticastPkts_offset 0x1C
-#define XgRxMulticastPkts_WIDTH 32
-#define XgRxUnicastPkts_offset 0x20
-#define XgRxUnicastPkts_WIDTH 32
-#define XgRxUndersizePkts_offset 0x24
-#define XgRxUndersizePkts_WIDTH 32
-#define XgRxOversizePkts_offset 0x28
-#define XgRxOversizePkts_WIDTH 32
-#define XgRxJabberPkts_offset 0x2C
-#define XgRxJabberPkts_WIDTH 32
-#define XgRxUndersizeFCSerrorPkts_offset 0x30
-#define XgRxUndersizeFCSerrorPkts_WIDTH 32
-#define XgRxDropEvents_offset 0x34
-#define XgRxDropEvents_WIDTH 32
-#define XgRxFCSerrorPkts_offset 0x38
-#define XgRxFCSerrorPkts_WIDTH 32
-#define XgRxAlignError_offset 0x3C
-#define XgRxAlignError_WIDTH 32
-#define XgRxSymbolError_offset 0x40
-#define XgRxSymbolError_WIDTH 32
-#define XgRxInternalMACError_offset 0x44
-#define XgRxInternalMACError_WIDTH 32
-#define XgRxControlPkts_offset 0x48
-#define XgRxControlPkts_WIDTH 32
-#define XgRxPausePkts_offset 0x4C
-#define XgRxPausePkts_WIDTH 32
-#define XgRxPkts64Octets_offset 0x50
-#define XgRxPkts64Octets_WIDTH 32
-#define XgRxPkts65to127Octets_offset 0x54
-#define XgRxPkts65to127Octets_WIDTH 32
-#define XgRxPkts128to255Octets_offset 0x58
-#define XgRxPkts128to255Octets_WIDTH 32
-#define XgRxPkts256to511Octets_offset 0x5C
-#define XgRxPkts256to511Octets_WIDTH 32
-#define XgRxPkts512to1023Octets_offset 0x60
-#define XgRxPkts512to1023Octets_WIDTH 32
-#define XgRxPkts1024to15xxOctets_offset 0x64
-#define XgRxPkts1024to15xxOctets_WIDTH 32
-#define XgRxPkts15xxtoMaxOctets_offset 0x68
-#define XgRxPkts15xxtoMaxOctets_WIDTH 32
-#define XgRxLengthError_offset 0x6C
-#define XgRxLengthError_WIDTH 32
-#define XgTxPkts_offset 0x80
-#define XgTxPkts_WIDTH 32
-#define XgTxOctets_offset 0x88
-#define XgTxOctets_WIDTH 48
-#define XgTxMulticastPkts_offset 0x90
-#define XgTxMulticastPkts_WIDTH 32
-#define XgTxBroadcastPkts_offset 0x94
-#define XgTxBroadcastPkts_WIDTH 32
-#define XgTxUnicastPkts_offset 0x98
-#define XgTxUnicastPkts_WIDTH 32
-#define XgTxControlPkts_offset 0x9C
-#define XgTxControlPkts_WIDTH 32
-#define XgTxPausePkts_offset 0xA0
-#define XgTxPausePkts_WIDTH 32
-#define XgTxPkts64Octets_offset 0xA4
-#define XgTxPkts64Octets_WIDTH 32
-#define XgTxPkts65to127Octets_offset 0xA8
-#define XgTxPkts65to127Octets_WIDTH 32
-#define XgTxPkts128to255Octets_offset 0xAC
-#define XgTxPkts128to255Octets_WIDTH 32
-#define XgTxPkts256to511Octets_offset 0xB0
-#define XgTxPkts256to511Octets_WIDTH 32
-#define XgTxPkts512to1023Octets_offset 0xB4
-#define XgTxPkts512to1023Octets_WIDTH 32
-#define XgTxPkts1024to15xxOctets_offset 0xB8
-#define XgTxPkts1024to15xxOctets_WIDTH 32
-#define XgTxPkts1519toMaxOctets_offset 0xBC
-#define XgTxPkts1519toMaxOctets_WIDTH 32
-#define XgTxUndersizePkts_offset 0xC0
-#define XgTxUndersizePkts_WIDTH 32
-#define XgTxOversizePkts_offset 0xC4
-#define XgTxOversizePkts_WIDTH 32
-#define XgTxNonTcpUdpPkt_offset 0xC8
-#define XgTxNonTcpUdpPkt_WIDTH 16
-#define XgTxMacSrcErrPkt_offset 0xCC
-#define XgTxMacSrcErrPkt_WIDTH 16
-#define XgTxIpSrcErrPkt_offset 0xD0
-#define XgTxIpSrcErrPkt_WIDTH 16
-#define XgDmaDone_offset 0xD4
-
-#define FALCON_STATS_NOT_DONE 0x00000000
-#define FALCON_STATS_DONE 0xffffffff
-
-/* Interrupt status register bits */
-#define FATAL_INT_LBN 64
-#define FATAL_INT_WIDTH 1
-#define INT_EVQS_LBN 40
-#define INT_EVQS_WIDTH 4
-
-/**************************************************************************
- *
- * Falcon non-volatile configuration
- *
- **************************************************************************
- */
-
-/* Board configuration v2 (v1 is obsolete; later versions are compatible) */
-struct falcon_nvconfig_board_v2 {
-	__le16 nports;
-	u8 port0_phy_addr;
-	u8 port0_phy_type;
-	u8 port1_phy_addr;
-	u8 port1_phy_type;
-	__le16 asic_sub_revision;
-	__le16 board_revision;
-} __packed;
-
-/* Board configuration v3 extra information */
-struct falcon_nvconfig_board_v3 {
-	__le32 spi_device_type[2];
-} __packed;
-
-/* Bit numbers for spi_device_type */
-#define SPI_DEV_TYPE_SIZE_LBN 0
-#define SPI_DEV_TYPE_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_ADDR_LEN_LBN 6
-#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2
-#define SPI_DEV_TYPE_ERASE_CMD_LBN 8
-#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8
-#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16
-#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24
-#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5
-#define SPI_DEV_TYPE_FIELD(type, field)					\
-	(((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field)))
-
-#define NVCONFIG_OFFSET 0x300
-
-#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
-struct falcon_nvconfig {
-	efx_oword_t ee_vpd_cfg_reg;			/* 0x300 */
-	u8 mac_address[2][8];			/* 0x310 */
-	efx_oword_t pcie_sd_ctl0123_reg;		/* 0x320 */
-	efx_oword_t pcie_sd_ctl45_reg;			/* 0x330 */
-	efx_oword_t pcie_pcs_ctl_stat_reg;		/* 0x340 */
-	efx_oword_t hw_init_reg;			/* 0x350 */
-	efx_oword_t nic_stat_reg;			/* 0x360 */
-	efx_oword_t glb_ctl_reg;			/* 0x370 */
-	efx_oword_t srm_cfg_reg;			/* 0x380 */
-	efx_oword_t spare_reg;				/* 0x390 */
-	__le16 board_magic_num;			/* 0x3A0 */
-	__le16 board_struct_ver;
-	__le16 board_checksum;
-	struct falcon_nvconfig_board_v2 board_v2;
-	efx_oword_t ee_base_page_reg;			/* 0x3B0 */
-	struct falcon_nvconfig_board_v3 board_v3;
-} __packed;
-
-#endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
deleted file mode 100644
index 8883092..0000000
--- a/drivers/net/sfc/falcon_io.h
+++ /dev/null
@@ -1,258 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_FALCON_IO_H
-#define EFX_FALCON_IO_H
-
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
-/**************************************************************************
- *
- * Falcon hardware access
- *
- **************************************************************************
- *
- * Notes on locking strategy:
- *
- * Most Falcon registers require 16-byte (or 8-byte, for SRAM
- * registers) atomic writes which necessitates locking.
- * Under normal operation few writes to the Falcon BAR are made and these
- * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
- * cased to allow 4-byte (hence lockless) accesses.
- *
- * It *is* safe to write to these 4-byte registers in the middle of an
- * access to an 8-byte or 16-byte register.  We therefore use a
- * spinlock to protect accesses to the larger registers, but no locks
- * for the 4-byte registers.
- *
- * A write barrier is needed to ensure that DW3 is written after DW0/1/2
- * due to the way the 16byte registers are "collected" in the Falcon BIU
- *
- * We also lock when carrying out reads, to ensure consistency of the
- * data (made possible since the BIU reads all 128 bits into a cache).
- * Reads are very rare, so this isn't a significant performance
- * impact.  (Most data transferred from NIC to host is DMAed directly
- * into host memory).
- *
- * I/O BAR access uses locks for both reads and writes (but is only provided
- * for testing purposes).
- */
-
-/* Special buffer descriptors (Falcon SRAM) */
-#define BUF_TBL_KER_A1 0x18000
-#define BUF_TBL_KER_B0 0x800000
-
-
-#if BITS_PER_LONG == 64
-#define FALCON_USE_QWORD_IO 1
-#endif
-
-#ifdef FALCON_USE_QWORD_IO
-static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
-				  unsigned int reg)
-{
-	__raw_writeq((__force u64)value, efx->membase + reg);
-}
-static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
-{
-	return (__force __le64)__raw_readq(efx->membase + reg);
-}
-#endif
-
-static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
-				  unsigned int reg)
-{
-	__raw_writel((__force u32)value, efx->membase + reg);
-}
-static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
-{
-	return (__force __le32)__raw_readl(efx->membase + reg);
-}
-
-/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
-static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
-				unsigned int reg)
-{
-	unsigned long flags;
-
-	EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg,
-		    EFX_OWORD_VAL(*value));
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	_falcon_writeq(efx, value->u64[0], reg + 0);
-	wmb();
-	_falcon_writeq(efx, value->u64[1], reg + 8);
-#else
-	_falcon_writel(efx, value->u32[0], reg + 0);
-	_falcon_writel(efx, value->u32[1], reg + 4);
-	_falcon_writel(efx, value->u32[2], reg + 8);
-	wmb();
-	_falcon_writel(efx, value->u32[3], reg + 12);
-#endif
-	mmiowb();
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-/* Writes to an 8-byte Falcon SRAM register, locking as appropriate. */
-static inline void falcon_write_sram(struct efx_nic *efx, efx_qword_t *value,
-				     unsigned int index)
-{
-	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
-	unsigned long flags;
-
-	EFX_REGDUMP(efx, "writing SRAM register %x with " EFX_QWORD_FMT "\n",
-		    reg, EFX_QWORD_VAL(*value));
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	_falcon_writeq(efx, value->u64[0], reg + 0);
-#else
-	_falcon_writel(efx, value->u32[0], reg + 0);
-	wmb();
-	_falcon_writel(efx, value->u32[1], reg + 4);
-#endif
-	mmiowb();
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-/* Write dword to Falcon register that allows partial writes
- *
- * Some Falcon registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
- * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
- * for lockless writes.
- */
-static inline void falcon_writel(struct efx_nic *efx, efx_dword_t *value,
-				 unsigned int reg)
-{
-	EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n",
-		    reg, EFX_DWORD_VAL(*value));
-
-	/* No lock required */
-	_falcon_writel(efx, value->u32[0], reg);
-}
-
-/* Read from a Falcon register
- *
- * This reads an entire 16-byte Falcon register in one go, locking as
- * appropriate.  It is essential to read the first dword first, as this
- * prompts Falcon to load the current value into the shadow register.
- */
-static inline void falcon_read(struct efx_nic *efx, efx_oword_t *value,
-			       unsigned int reg)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-	value->u32[0] = _falcon_readl(efx, reg + 0);
-	rmb();
-	value->u32[1] = _falcon_readl(efx, reg + 4);
-	value->u32[2] = _falcon_readl(efx, reg + 8);
-	value->u32[3] = _falcon_readl(efx, reg + 12);
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-
-	EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg,
-		    EFX_OWORD_VAL(*value));
-}
-
-/* This reads an 8-byte Falcon SRAM entry in one go. */
-static inline void falcon_read_sram(struct efx_nic *efx, efx_qword_t *value,
-				    unsigned int index)
-{
-	unsigned int reg = efx->type->buf_tbl_base + (index * sizeof(*value));
-	unsigned long flags;
-
-	spin_lock_irqsave(&efx->biu_lock, flags);
-#ifdef FALCON_USE_QWORD_IO
-	value->u64[0] = _falcon_readq(efx, reg + 0);
-#else
-	value->u32[0] = _falcon_readl(efx, reg + 0);
-	rmb();
-	value->u32[1] = _falcon_readl(efx, reg + 4);
-#endif
-	spin_unlock_irqrestore(&efx->biu_lock, flags);
-
-	EFX_REGDUMP(efx, "read from SRAM register %x, got "EFX_QWORD_FMT"\n",
-		    reg, EFX_QWORD_VAL(*value));
-}
-
-/* Read dword from Falcon register that allows partial writes (sic) */
-static inline void falcon_readl(struct efx_nic *efx, efx_dword_t *value,
-				unsigned int reg)
-{
-	value->u32[0] = _falcon_readl(efx, reg);
-	EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n",
-		    reg, EFX_DWORD_VAL(*value));
-}
-
-/* Write to a register forming part of a table */
-static inline void falcon_write_table(struct efx_nic *efx, efx_oword_t *value,
-				      unsigned int reg, unsigned int index)
-{
-	falcon_write(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Read to a register forming part of a table */
-static inline void falcon_read_table(struct efx_nic *efx, efx_oword_t *value,
-				     unsigned int reg, unsigned int index)
-{
-	falcon_read(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Write to a dword register forming part of a table */
-static inline void falcon_writel_table(struct efx_nic *efx, efx_dword_t *value,
-				       unsigned int reg, unsigned int index)
-{
-	falcon_writel(efx, value, reg + index * sizeof(efx_oword_t));
-}
-
-/* Page-mapped register block size */
-#define FALCON_PAGE_BLOCK_SIZE 0x2000
-
-/* Calculate offset to page-mapped register block */
-#define FALCON_PAGED_REG(page, reg) \
-	((page) * FALCON_PAGE_BLOCK_SIZE + (reg))
-
-/* As for falcon_write(), but for a page-mapped register. */
-static inline void falcon_write_page(struct efx_nic *efx, efx_oword_t *value,
-				     unsigned int reg, unsigned int page)
-{
-	falcon_write(efx, value, FALCON_PAGED_REG(page, reg));
-}
-
-/* As for falcon_writel(), but for a page-mapped register. */
-static inline void falcon_writel_page(struct efx_nic *efx, efx_dword_t *value,
-				      unsigned int reg, unsigned int page)
-{
-	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
-}
-
-/* Write dword to Falcon page-mapped register with an extra lock.
- *
- * As for falcon_writel_page(), but for a register that suffers from
- * SFC bug 3181.  If writing to page 0, take out a lock so the BIU
- * collector cannot be confused.
- */
-static inline void falcon_writel_page_locked(struct efx_nic *efx,
-					     efx_dword_t *value,
-					     unsigned int reg,
-					     unsigned int page)
-{
-	unsigned long flags = 0;
-
-	if (page == 0)
-		spin_lock_irqsave(&efx->biu_lock, flags);
-	falcon_writel(efx, value, FALCON_PAGED_REG(page, reg));
-	if (page == 0)
-		spin_unlock_irqrestore(&efx->biu_lock, flags);
-}
-
-#endif /* EFX_FALCON_IO_H */
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index bec52ca..7e57b4a 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -12,12 +12,11 @@
 #include "net_driver.h"
 #include "efx.h"
 #include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
+#include "regs.h"
+#include "io.h"
 #include "mac.h"
 #include "mdio_10g.h"
 #include "phy.h"
-#include "boards.h"
 #include "workarounds.h"
 
 /**************************************************************************
@@ -36,27 +35,27 @@
 	if (efx->phy_type == PHY_TYPE_NONE)
 		return;
 
-	falcon_read(efx, &sdctl, XX_SD_CTL_REG);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVD, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVD, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVC, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVC, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVB, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVB, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_HIDRVA, XX_SD_CTL_DRV_DEFAULT);
-	EFX_SET_OWORD_FIELD(sdctl, XX_LODRVA, XX_SD_CTL_DRV_DEFAULT);
-	falcon_write(efx, &sdctl, XX_SD_CTL_REG);
+	efx_reado(efx, &sdctl, FR_AB_XX_SD_CTL);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVD, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVD, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVC, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVC, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVB, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVB, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_HIDRVA, FFE_AB_XX_SD_CTL_DRV_DEF);
+	EFX_SET_OWORD_FIELD(sdctl, FRF_AB_XX_LODRVA, FFE_AB_XX_SD_CTL_DRV_DEF);
+	efx_writeo(efx, &sdctl, FR_AB_XX_SD_CTL);
 
 	EFX_POPULATE_OWORD_8(txdrv,
-			     XX_DEQD, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQC, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQB, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DEQA, XX_TXDRV_DEQ_DEFAULT,
-			     XX_DTXD, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXC, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXB, XX_TXDRV_DTX_DEFAULT,
-			     XX_DTXA, XX_TXDRV_DTX_DEFAULT);
-	falcon_write(efx, &txdrv, XX_TXDRV_CTL_REG);
+			     FRF_AB_XX_DEQD, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQC, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQB, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DEQA, FFE_AB_XX_TXDRV_DEQ_DEF,
+			     FRF_AB_XX_DTXD, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXC, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXB, FFE_AB_XX_TXDRV_DTX_DEF,
+			     FRF_AB_XX_DTXA, FFE_AB_XX_TXDRV_DTX_DEF);
+	efx_writeo(efx, &txdrv, FR_AB_XX_TXDRV_CTL);
 }
 
 int falcon_reset_xaui(struct efx_nic *efx)
@@ -65,14 +64,14 @@
 	int count;
 
 	/* Start reset sequence */
-	EFX_POPULATE_DWORD_1(reg, XX_RST_XX_EN, 1);
-	falcon_write(efx, &reg, XX_PWR_RST_REG);
+	EFX_POPULATE_DWORD_1(reg, FRF_AB_XX_RST_XX_EN, 1);
+	efx_writeo(efx, &reg, FR_AB_XX_PWR_RST);
 
 	/* Wait up to 10 ms for completion, then reinitialise */
 	for (count = 0; count < 1000; count++) {
-		falcon_read(efx, &reg, XX_PWR_RST_REG);
-		if (EFX_OWORD_FIELD(reg, XX_RST_XX_EN) == 0 &&
-		    EFX_OWORD_FIELD(reg, XX_SD_RST_ACT) == 0) {
+		efx_reado(efx, &reg, FR_AB_XX_PWR_RST);
+		if (EFX_OWORD_FIELD(reg, FRF_AB_XX_RST_XX_EN) == 0 &&
+		    EFX_OWORD_FIELD(reg, FRF_AB_XX_SD_RST_ACT) == 0) {
 			falcon_setup_xaui(efx);
 			return 0;
 		}
@@ -100,12 +99,12 @@
 
 	/* Flush the ISR */
 	if (enable)
-		falcon_read(efx, &reg, XM_MGT_INT_REG_B0);
+		efx_reado(efx, &reg, FR_AB_XM_MGT_INT_MSK);
 
 	EFX_POPULATE_OWORD_2(reg,
-			     XM_MSK_RMTFLT, !enable,
-			     XM_MSK_LCLFLT, !enable);
-	falcon_write(efx, &reg, XM_MGT_INT_MSK_REG_B0);
+			     FRF_AB_XM_MSK_RMTFLT, !enable,
+			     FRF_AB_XM_MSK_LCLFLT, !enable);
+	efx_writeo(efx, &reg, FR_AB_XM_MGT_INT_MASK);
 }
 
 /* Get status of XAUI link */
@@ -119,18 +118,18 @@
 		return true;
 
 	/* Read link status */
-	falcon_read(efx, &reg, XX_CORE_STAT_REG);
+	efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
 
-	align_done = EFX_OWORD_FIELD(reg, XX_ALIGN_DONE);
-	sync_status = EFX_OWORD_FIELD(reg, XX_SYNC_STAT);
-	if (align_done && (sync_status == XX_SYNC_STAT_DECODE_SYNCED))
+	align_done = EFX_OWORD_FIELD(reg, FRF_AB_XX_ALIGN_DONE);
+	sync_status = EFX_OWORD_FIELD(reg, FRF_AB_XX_SYNC_STAT);
+	if (align_done && (sync_status == FFE_AB_XX_STAT_ALL_LANES))
 		link_ok = true;
 
 	/* Clear link status ready for next read */
-	EFX_SET_OWORD_FIELD(reg, XX_COMMA_DET, XX_COMMA_DET_RESET);
-	EFX_SET_OWORD_FIELD(reg, XX_CHARERR, XX_CHARERR_RESET);
-	EFX_SET_OWORD_FIELD(reg, XX_DISPERR, XX_DISPERR_RESET);
-	falcon_write(efx, &reg, XX_CORE_STAT_REG);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_COMMA_DET, FFE_AB_XX_STAT_ALL_LANES);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_CHAR_ERR, FFE_AB_XX_STAT_ALL_LANES);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_DISPERR, FFE_AB_XX_STAT_ALL_LANES);
+	efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
 
 	/* If the link is up, then check the phy side of the xaui link */
 	if (efx->link_up && link_ok)
@@ -148,55 +147,49 @@
 
 	/* Configure MAC  - cut-thru mode is hard wired on */
 	EFX_POPULATE_DWORD_3(reg,
-			     XM_RX_JUMBO_MODE, 1,
-			     XM_TX_STAT_EN, 1,
-			     XM_RX_STAT_EN, 1);
-	falcon_write(efx, &reg, XM_GLB_CFG_REG);
+			     FRF_AB_XM_RX_JUMBO_MODE, 1,
+			     FRF_AB_XM_TX_STAT_EN, 1,
+			     FRF_AB_XM_RX_STAT_EN, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_GLB_CFG);
 
 	/* Configure TX */
 	EFX_POPULATE_DWORD_6(reg,
-			     XM_TXEN, 1,
-			     XM_TX_PRMBL, 1,
-			     XM_AUTO_PAD, 1,
-			     XM_TXCRC, 1,
-			     XM_FCNTL, 1,
-			     XM_IPG, 0x3);
-	falcon_write(efx, &reg, XM_TX_CFG_REG);
+			     FRF_AB_XM_TXEN, 1,
+			     FRF_AB_XM_TX_PRMBL, 1,
+			     FRF_AB_XM_AUTO_PAD, 1,
+			     FRF_AB_XM_TXCRC, 1,
+			     FRF_AB_XM_FCNTL, 1,
+			     FRF_AB_XM_IPG, 0x3);
+	efx_writeo(efx, &reg, FR_AB_XM_TX_CFG);
 
 	/* Configure RX */
 	EFX_POPULATE_DWORD_5(reg,
-			     XM_RXEN, 1,
-			     XM_AUTO_DEPAD, 0,
-			     XM_ACPT_ALL_MCAST, 1,
-			     XM_ACPT_ALL_UCAST, efx->promiscuous,
-			     XM_PASS_CRC_ERR, 1);
-	falcon_write(efx, &reg, XM_RX_CFG_REG);
+			     FRF_AB_XM_RXEN, 1,
+			     FRF_AB_XM_AUTO_DEPAD, 0,
+			     FRF_AB_XM_ACPT_ALL_MCAST, 1,
+			     FRF_AB_XM_ACPT_ALL_UCAST, efx->promiscuous,
+			     FRF_AB_XM_PASS_CRC_ERR, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_RX_CFG);
 
 	/* Set frame length */
 	max_frame_len = EFX_MAX_FRAME_LEN(efx->net_dev->mtu);
-	EFX_POPULATE_DWORD_1(reg, XM_MAX_RX_FRM_SIZE, max_frame_len);
-	falcon_write(efx, &reg, XM_RX_PARAM_REG);
+	EFX_POPULATE_DWORD_1(reg, FRF_AB_XM_MAX_RX_FRM_SIZE, max_frame_len);
+	efx_writeo(efx, &reg, FR_AB_XM_RX_PARAM);
 	EFX_POPULATE_DWORD_2(reg,
-			     XM_MAX_TX_FRM_SIZE, max_frame_len,
-			     XM_TX_JUMBO_MODE, 1);
-	falcon_write(efx, &reg, XM_TX_PARAM_REG);
+			     FRF_AB_XM_MAX_TX_FRM_SIZE, max_frame_len,
+			     FRF_AB_XM_TX_JUMBO_MODE, 1);
+	efx_writeo(efx, &reg, FR_AB_XM_TX_PARAM);
 
 	EFX_POPULATE_DWORD_2(reg,
-			     XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */
-			     XM_DIS_FCNTL, !rx_fc);
-	falcon_write(efx, &reg, XM_FC_REG);
+			     FRF_AB_XM_PAUSE_TIME, 0xfffe, /* MAX PAUSE TIME */
+			     FRF_AB_XM_DIS_FCNTL, !rx_fc);
+	efx_writeo(efx, &reg, FR_AB_XM_FC);
 
 	/* Set MAC address */
-	EFX_POPULATE_DWORD_4(reg,
-			     XM_ADR_0, efx->net_dev->dev_addr[0],
-			     XM_ADR_1, efx->net_dev->dev_addr[1],
-			     XM_ADR_2, efx->net_dev->dev_addr[2],
-			     XM_ADR_3, efx->net_dev->dev_addr[3]);
-	falcon_write(efx, &reg, XM_ADR_LO_REG);
-	EFX_POPULATE_DWORD_2(reg,
-			     XM_ADR_4, efx->net_dev->dev_addr[4],
-			     XM_ADR_5, efx->net_dev->dev_addr[5]);
-	falcon_write(efx, &reg, XM_ADR_HI_REG);
+	memcpy(&reg, &efx->net_dev->dev_addr[0], 4);
+	efx_writeo(efx, &reg, FR_AB_XM_ADR_LO);
+	memcpy(&reg, &efx->net_dev->dev_addr[4], 2);
+	efx_writeo(efx, &reg, FR_AB_XM_ADR_HI);
 }
 
 static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
@@ -212,12 +205,13 @@
 		bool old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback;
 		bool reset_xgxs;
 
-		falcon_read(efx, &reg, XX_CORE_STAT_REG);
-		old_xgxs_loopback = EFX_OWORD_FIELD(reg, XX_XGXS_LB_EN);
-		old_xgmii_loopback = EFX_OWORD_FIELD(reg, XX_XGMII_LB_EN);
+		efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
+		old_xgxs_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN);
+		old_xgmii_loopback =
+			EFX_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN);
 
-		falcon_read(efx, &reg, XX_SD_CTL_REG);
-		old_xaui_loopback = EFX_OWORD_FIELD(reg, XX_LPBKA);
+		efx_reado(efx, &reg, FR_AB_XX_SD_CTL);
+		old_xaui_loopback = EFX_OWORD_FIELD(reg, FRF_AB_XX_LPBKA);
 
 		/* The PHY driver may have turned XAUI off */
 		reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) ||
@@ -228,20 +222,20 @@
 			falcon_reset_xaui(efx);
 	}
 
-	falcon_read(efx, &reg, XX_CORE_STAT_REG);
-	EFX_SET_OWORD_FIELD(reg, XX_FORCE_SIG,
+	efx_reado(efx, &reg, FR_AB_XX_CORE_STAT);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_FORCE_SIG,
 			    (xgxs_loopback || xaui_loopback) ?
-			    XX_FORCE_SIG_DECODE_FORCED : 0);
-	EFX_SET_OWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback);
-	falcon_write(efx, &reg, XX_CORE_STAT_REG);
+			    FFE_AB_XX_FORCE_SIG_ALL_LANES : 0);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGXS_LB_EN, xgxs_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_XGMII_LB_EN, xgmii_loopback);
+	efx_writeo(efx, &reg, FR_AB_XX_CORE_STAT);
 
-	falcon_read(efx, &reg, XX_SD_CTL_REG);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKD, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKC, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKB, xaui_loopback);
-	EFX_SET_OWORD_FIELD(reg, XX_LPBKA, xaui_loopback);
-	falcon_write(efx, &reg, XX_SD_CTL_REG);
+	efx_reado(efx, &reg, FR_AB_XX_SD_CTL);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKD, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKC, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKB, xaui_loopback);
+	EFX_SET_OWORD_FIELD(reg, FRF_AB_XX_LPBKA, xaui_loopback);
+	efx_writeo(efx, &reg, FR_AB_XX_SD_CTL);
 }
 
 
diff --git a/drivers/net/sfc/gmii.h b/drivers/net/sfc/gmii.h
deleted file mode 100644
index dfccaa7..0000000
--- a/drivers/net/sfc/gmii.h
+++ /dev/null
@@ -1,60 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2005-2006 Fen Systems Ltd.
- * Copyright 2006-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-#ifndef EFX_GMII_H
-#define EFX_GMII_H
-
-/*
- * GMII interface
- */
-
-#include <linux/mii.h>
-
-/* GMII registers, excluding registers already defined as MII
- * registers in mii.h
- */
-#define GMII_IER		0x12	/* Interrupt enable register */
-#define GMII_ISR		0x13	/* Interrupt status register */
-
-/* Interrupt enable register */
-#define IER_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
-#define IER_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
-#define IER_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
-#define IER_PAGE_RCVD		0x1000	/* Bit 12 - page received */
-#define IER_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
-#define IER_LINK_CHG		0x0400	/* Bit 10 - link status changed */
-#define IER_SYM_ERR		0x0200	/* Bit 9 - symbol error */
-#define IER_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
-#define IER_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
-#define IER_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
-#define IER_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
-#define IER_ENERGY		0x0010	/* Bit 4 - energy detect */
-#define IER_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
-#define IER_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
-#define IER_JABBER		0x0001	/* Bit 0 - jabber */
-
-/* Interrupt status register */
-#define ISR_ANEG_ERR		0x8000	/* Bit 15 - autonegotiation error */
-#define ISR_SPEED_CHG		0x4000	/* Bit 14 - speed changed */
-#define ISR_DUPLEX_CHG		0x2000	/* Bit 13 - duplex changed */
-#define ISR_PAGE_RCVD		0x1000	/* Bit 12 - page received */
-#define ISR_ANEG_DONE		0x0800	/* Bit 11 - autonegotiation complete */
-#define ISR_LINK_CHG		0x0400	/* Bit 10 - link status changed */
-#define ISR_SYM_ERR		0x0200	/* Bit 9 - symbol error */
-#define ISR_FALSE_CARRIER	0x0100	/* Bit 8 - false carrier */
-#define ISR_FIFO_ERR		0x0080	/* Bit 7 - FIFO over/underflow */
-#define ISR_MDIX_CHG		0x0040	/* Bit 6 - MDI crossover changed */
-#define ISR_DOWNSHIFT		0x0020	/* Bit 5 - downshift */
-#define ISR_ENERGY		0x0010	/* Bit 4 - energy detect */
-#define ISR_DTE_POWER		0x0004	/* Bit 2 - DTE power detect */
-#define ISR_POLARITY_CHG	0x0002	/* Bit 1 - polarity changed */
-#define ISR_JABBER		0x0001	/* Bit 0 - jabber */
-
-#endif /* EFX_GMII_H */
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
new file mode 100644
index 0000000..b89177c
--- /dev/null
+++ b/drivers/net/sfc/io.h
@@ -0,0 +1,256 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_IO_H
+#define EFX_IO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+/**************************************************************************
+ *
+ * NIC register I/O
+ *
+ **************************************************************************
+ *
+ * Notes on locking strategy:
+ *
+ * Most NIC registers require 16-byte (or 8-byte, for SRAM) atomic writes
+ * which necessitates locking.
+ * Under normal operation few writes to NIC registers are made and these
+ * registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and TX_DESC_UPD_REG) are special
+ * cased to allow 4-byte (hence lockless) accesses.
+ *
+ * It *is* safe to write to these 4-byte registers in the middle of an
+ * access to an 8-byte or 16-byte register.  We therefore use a
+ * spinlock to protect accesses to the larger registers, but no locks
+ * for the 4-byte registers.
+ *
+ * A write barrier is needed to ensure that DW3 is written after DW0/1/2
+ * due to the way the 16byte registers are "collected" in the BIU.
+ *
+ * We also lock when carrying out reads, to ensure consistency of the
+ * data (made possible since the BIU reads all 128 bits into a cache).
+ * Reads are very rare, so this isn't a significant performance
+ * impact.  (Most data transferred from NIC to host is DMAed directly
+ * into host memory).
+ *
+ * I/O BAR access uses locks for both reads and writes (but is only provided
+ * for testing purposes).
+ */
+
+#if BITS_PER_LONG == 64
+#define EFX_USE_QWORD_IO 1
+#endif
+
+#ifdef EFX_USE_QWORD_IO
+static inline void _efx_writeq(struct efx_nic *efx, __le64 value,
+				  unsigned int reg)
+{
+	__raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _efx_readq(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _efx_writed(struct efx_nic *efx, __le32 value,
+				  unsigned int reg)
+{
+	__raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _efx_readd(struct efx_nic *efx, unsigned int reg)
+{
+	return (__force __le32)__raw_readl(efx->membase + reg);
+}
+
+/* Writes to a normal 16-byte Efx register, locking as appropriate. */
+static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value,
+			      unsigned int reg)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	EFX_REGDUMP(efx, "writing register %x with " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	_efx_writeq(efx, value->u64[0], reg + 0);
+	wmb();
+	_efx_writeq(efx, value->u64[1], reg + 8);
+#else
+	_efx_writed(efx, value->u32[0], reg + 0);
+	_efx_writed(efx, value->u32[1], reg + 4);
+	_efx_writed(efx, value->u32[2], reg + 8);
+	wmb();
+	_efx_writed(efx, value->u32[3], reg + 12);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Write an 8-byte NIC SRAM entry through the supplied mapping,
+ * locking as appropriate. */
+static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase,
+				   efx_qword_t *value, unsigned int index)
+{
+	unsigned int addr = index * sizeof(*value);
+	unsigned long flags __attribute__ ((unused));
+
+	EFX_REGDUMP(efx, "writing SRAM address %x with " EFX_QWORD_FMT "\n",
+		    addr, EFX_QWORD_VAL(*value));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	__raw_writeq((__force u64)value->u64[0], membase + addr);
+#else
+	__raw_writel((__force u32)value->u32[0], membase + addr);
+	wmb();
+	__raw_writel((__force u32)value->u32[1], membase + addr + 4);
+#endif
+	mmiowb();
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+}
+
+/* Write dword to NIC register that allows partial writes
+ *
+ * Some registers (EVQ_RPTR_REG, RX_DESC_UPD_REG and
+ * TX_DESC_UPD_REG) can be written to as a single dword.  This allows
+ * for lockless writes.
+ */
+static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value,
+			      unsigned int reg)
+{
+	EFX_REGDUMP(efx, "writing partial register %x with "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+
+	/* No lock required */
+	_efx_writed(efx, value->u32[0], reg);
+}
+
+/* Read from a NIC register
+ *
+ * This reads an entire 16-byte register in one go, locking as
+ * appropriate.  It is essential to read the first dword first, as this
+ * prompts the NIC to load the current value into the shadow register.
+ */
+static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value,
+			     unsigned int reg)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+	value->u32[0] = _efx_readd(efx, reg + 0);
+	rmb();
+	value->u32[1] = _efx_readd(efx, reg + 4);
+	value->u32[2] = _efx_readd(efx, reg + 8);
+	value->u32[3] = _efx_readd(efx, reg + 12);
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from register %x, got " EFX_OWORD_FMT "\n", reg,
+		    EFX_OWORD_VAL(*value));
+}
+
+/* Read an 8-byte SRAM entry through supplied mapping,
+ * locking as appropriate. */
+static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase,
+				  efx_qword_t *value, unsigned int index)
+{
+	unsigned int addr = index * sizeof(*value);
+	unsigned long flags __attribute__ ((unused));
+
+	spin_lock_irqsave(&efx->biu_lock, flags);
+#ifdef EFX_USE_QWORD_IO
+	value->u64[0] = (__force __le64)__raw_readq(membase + addr);
+#else
+	value->u32[0] = (__force __le32)__raw_readl(membase + addr);
+	rmb();
+	value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
+#endif
+	spin_unlock_irqrestore(&efx->biu_lock, flags);
+
+	EFX_REGDUMP(efx, "read from SRAM address %x, got "EFX_QWORD_FMT"\n",
+		    addr, EFX_QWORD_VAL(*value));
+}
+
+/* Read dword from register that allows partial writes (sic) */
+static inline void efx_readd(struct efx_nic *efx, efx_dword_t *value,
+				unsigned int reg)
+{
+	value->u32[0] = _efx_readd(efx, reg);
+	EFX_REGDUMP(efx, "read from register %x, got "EFX_DWORD_FMT"\n",
+		    reg, EFX_DWORD_VAL(*value));
+}
+
+/* Write to a register forming part of a table */
+static inline void efx_writeo_table(struct efx_nic *efx, efx_oword_t *value,
+				      unsigned int reg, unsigned int index)
+{
+	efx_writeo(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Read to a register forming part of a table */
+static inline void efx_reado_table(struct efx_nic *efx, efx_oword_t *value,
+				     unsigned int reg, unsigned int index)
+{
+	efx_reado(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Write to a dword register forming part of a table */
+static inline void efx_writed_table(struct efx_nic *efx, efx_dword_t *value,
+				       unsigned int reg, unsigned int index)
+{
+	efx_writed(efx, value, reg + index * sizeof(efx_oword_t));
+}
+
+/* Page-mapped register block size */
+#define EFX_PAGE_BLOCK_SIZE 0x2000
+
+/* Calculate offset to page-mapped register block */
+#define EFX_PAGED_REG(page, reg) \
+	((page) * EFX_PAGE_BLOCK_SIZE + (reg))
+
+/* As for efx_writeo(), but for a page-mapped register. */
+static inline void efx_writeo_page(struct efx_nic *efx, efx_oword_t *value,
+				   unsigned int reg, unsigned int page)
+{
+	efx_writeo(efx, value, EFX_PAGED_REG(page, reg));
+}
+
+/* As for efx_writed(), but for a page-mapped register. */
+static inline void efx_writed_page(struct efx_nic *efx, efx_dword_t *value,
+				   unsigned int reg, unsigned int page)
+{
+	efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+}
+
+/* Write dword to page-mapped register with an extra lock.
+ *
+ * As for efx_writed_page(), but for a register that suffers from
+ * SFC bug 3181. Take out a lock so the BIU collector cannot be
+ * confused. */
+static inline void efx_writed_page_locked(struct efx_nic *efx,
+					  efx_dword_t *value,
+					  unsigned int reg,
+					  unsigned int page)
+{
+	unsigned long flags __attribute__ ((unused));
+
+	if (page == 0) {
+		spin_lock_irqsave(&efx->biu_lock, flags);
+		efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+		spin_unlock_irqrestore(&efx->biu_lock, flags);
+	} else {
+		efx_writed(efx, value, EFX_PAGED_REG(page, reg));
+	}
+}
+
+#endif /* EFX_IO_H */
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 6c33459..231e580 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -14,7 +14,6 @@
 #include <linux/delay.h>
 #include "net_driver.h"
 #include "mdio_10g.h"
-#include "boards.h"
 #include "workarounds.h"
 
 unsigned efx_mdio_id_oui(u32 id)
@@ -249,7 +248,7 @@
 int efx_mdio_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	struct ethtool_cmd prev;
-	u32 required;
+	bool xnp;
 	int reg;
 
 	efx->phy_op->get_settings(efx, &prev);
@@ -266,86 +265,60 @@
 		return -EINVAL;
 
 	/* Check that PHY supports these settings */
-	if (ecmd->autoneg) {
-		required = SUPPORTED_Autoneg;
-	} else if (ecmd->duplex) {
-		switch (ecmd->speed) {
-		case SPEED_10:  required = SUPPORTED_10baseT_Full;  break;
-		case SPEED_100: required = SUPPORTED_100baseT_Full; break;
-		default:        return -EINVAL;
-		}
-	} else {
-		switch (ecmd->speed) {
-		case SPEED_10:  required = SUPPORTED_10baseT_Half;  break;
-		case SPEED_100: required = SUPPORTED_100baseT_Half; break;
-		default:        return -EINVAL;
-		}
-	}
-	required |= ecmd->advertising;
-	if (required & ~prev.supported)
+	if (!ecmd->autoneg ||
+	    (ecmd->advertising | SUPPORTED_Autoneg) & ~prev.supported)
 		return -EINVAL;
 
-	if (ecmd->autoneg) {
-		bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
-			    || EFX_WORKAROUND_13204(efx));
+	xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+	       || EFX_WORKAROUND_13204(efx));
 
-		/* Set up the base page */
-		reg = ADVERTISE_CSMA;
-		if (ecmd->advertising & ADVERTISED_10baseT_Half)
-			reg |= ADVERTISE_10HALF;
-		if (ecmd->advertising & ADVERTISED_10baseT_Full)
-			reg |= ADVERTISE_10FULL;
-		if (ecmd->advertising & ADVERTISED_100baseT_Half)
-			reg |= ADVERTISE_100HALF;
-		if (ecmd->advertising & ADVERTISED_100baseT_Full)
-			reg |= ADVERTISE_100FULL;
-		if (xnp)
-			reg |= ADVERTISE_RESV;
-		else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
-					      ADVERTISED_1000baseT_Full))
-			reg |= ADVERTISE_NPAGE;
-		reg |= mii_advertise_flowctrl(efx->wanted_fc);
-		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
+	/* Set up the base page */
+	reg = ADVERTISE_CSMA;
+	if (ecmd->advertising & ADVERTISED_10baseT_Half)
+		reg |= ADVERTISE_10HALF;
+	if (ecmd->advertising & ADVERTISED_10baseT_Full)
+		reg |= ADVERTISE_10FULL;
+	if (ecmd->advertising & ADVERTISED_100baseT_Half)
+		reg |= ADVERTISE_100HALF;
+	if (ecmd->advertising & ADVERTISED_100baseT_Full)
+		reg |= ADVERTISE_100FULL;
+	if (xnp)
+		reg |= ADVERTISE_RESV;
+	else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+				      ADVERTISED_1000baseT_Full))
+		reg |= ADVERTISE_NPAGE;
+	reg |= mii_advertise_flowctrl(efx->wanted_fc);
+	efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, reg);
 
-		/* Set up the (extended) next page if necessary */
-		if (efx->phy_op->set_npage_adv)
-			efx->phy_op->set_npage_adv(efx, ecmd->advertising);
+	/* Set up the (extended) next page if necessary */
+	if (efx->phy_op->set_npage_adv)
+		efx->phy_op->set_npage_adv(efx, ecmd->advertising);
 
-		/* Enable and restart AN */
-		reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
-		reg |= MDIO_AN_CTRL1_ENABLE;
-		if (!(EFX_WORKAROUND_15195(efx) &&
-		      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
-			reg |= MDIO_AN_CTRL1_RESTART;
-		if (xnp)
-			reg |= MDIO_AN_CTRL1_XNP;
-		else
-			reg &= ~MDIO_AN_CTRL1_XNP;
-		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
-	} else {
-		/* Disable AN */
-		efx_mdio_set_flag(efx, MDIO_MMD_AN, MDIO_CTRL1,
-				  MDIO_AN_CTRL1_ENABLE, false);
-
-		/* Set the basic control bits */
-		reg = efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-		reg &= ~(MDIO_CTRL1_SPEEDSEL | MDIO_CTRL1_FULLDPLX);
-		if (ecmd->speed == SPEED_100)
-			reg |= MDIO_PMA_CTRL1_SPEED100;
-		if (ecmd->duplex)
-			reg |= MDIO_CTRL1_FULLDPLX;
-		efx_mdio_write(efx, MDIO_MMD_PMAPMD, MDIO_CTRL1, reg);
-	}
+	/* Enable and restart AN */
+	reg = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_CTRL1);
+	reg |= MDIO_AN_CTRL1_ENABLE;
+	if (!(EFX_WORKAROUND_15195(efx) &&
+	      LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+		reg |= MDIO_AN_CTRL1_RESTART;
+	if (xnp)
+		reg |= MDIO_AN_CTRL1_XNP;
+	else
+		reg &= ~MDIO_AN_CTRL1_XNP;
+	efx_mdio_write(efx, MDIO_MMD_AN, MDIO_CTRL1, reg);
 
 	return 0;
 }
 
 enum efx_fc_type efx_mdio_get_pause(struct efx_nic *efx)
 {
-	int lpa;
+	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
 
-	if (!(efx->phy_op->mmds & MDIO_DEVS_AN))
+	if (!(efx->wanted_fc & EFX_FC_AUTO))
 		return efx->wanted_fc;
-	lpa = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA);
-	return efx_fc_resolve(efx->wanted_fc, lpa);
+
+	WARN_ON(!(efx->mdio.mmds & MDIO_DEVS_AN));
+
+	return mii_resolve_flowctrl_fdx(
+		mii_advertise_flowctrl(efx->wanted_fc),
+		efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_LPA));
 }
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 6b14421..75b37f1 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -17,7 +17,6 @@
  */
 
 #include "efx.h"
-#include "boards.h"
 
 static inline unsigned efx_mdio_id_rev(u32 id) { return id & 0xf; }
 static inline unsigned efx_mdio_id_model(u32 id) { return (id >> 4) & 0x3f; }
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 298566d..bb3d258 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -327,7 +327,7 @@
  * @used_flags: Channel is used by net driver
  * @enabled: Channel enabled indicator
  * @irq: IRQ number (MSI and MSI-X only)
- * @irq_moderation: IRQ moderation value (in us)
+ * @irq_moderation: IRQ moderation value (in hardware ticks)
  * @napi_dev: Net device used with NAPI
  * @napi_str: NAPI control structure
  * @reset_work: Scheduled reset work thread
@@ -389,19 +389,6 @@
 };
 
 /**
- * struct efx_blinker - S/W LED blinking context
- * @state: Current state - on or off
- * @resubmit: Timer resubmission flag
- * @timer: Control timer for blinking
- */
-struct efx_blinker {
-	bool state;
-	bool resubmit;
-	struct timer_list timer;
-};
-
-
-/**
  * struct efx_board - board information
  * @type: Board model type
  * @major: Major rev. ('A', 'B' ...)
@@ -412,7 +399,9 @@
  * @blink: Starts/stops blinking
  * @monitor: Board-specific health check function
  * @fini: Cleanup function
- * @blinker: used to blink LEDs in software
+ * @blink_state: Current blink state
+ * @blink_resubmit: Blink timer resubmission flag
+ * @blink_timer: Blink timer
  * @hwmon_client: I2C client for hardware monitor
  * @ioexp_client: I2C client for power/port control
  */
@@ -429,7 +418,9 @@
 	int (*monitor) (struct efx_nic *nic);
 	void (*blink) (struct efx_nic *efx, bool start);
 	void (*fini) (struct efx_nic *nic);
-	struct efx_blinker blinker;
+	bool blink_state;
+	bool blink_resubmit;
+	struct timer_list blink_timer;
 	struct i2c_client *hwmon_client, *ioexp_client;
 };
 
@@ -506,17 +497,6 @@
 	EFX_XMAC = 2,
 };
 
-static inline enum efx_fc_type efx_fc_resolve(enum efx_fc_type wanted_fc,
-					      unsigned int lpa)
-{
-	BUILD_BUG_ON(EFX_FC_AUTO & (EFX_FC_RX | EFX_FC_TX));
-
-	if (!(wanted_fc & EFX_FC_AUTO))
-		return wanted_fc;
-
-	return mii_resolve_flowctrl_fdx(mii_advertise_flowctrl(wanted_fc), lpa);
-}
-
 /**
  * struct efx_mac_operations - Efx MAC operations table
  * @reconfigure: Reconfigure MAC. Serialised by the mac_lock
@@ -537,7 +517,6 @@
  * @fini: Shut down PHY
  * @reconfigure: Reconfigure PHY (e.g. for new link parameters)
  * @clear_interrupt: Clear down interrupt
- * @blink: Blink LEDs
  * @poll: Poll for hardware state. Serialised by the mac_lock.
  * @get_settings: Get ethtool settings. Serialised by the mac_lock.
  * @set_settings: Set ethtool settings. Serialised by the mac_lock.
@@ -697,10 +676,13 @@
  * @tx_queue: TX DMA queues
  * @rx_queue: RX DMA queues
  * @channel: Channels
+ * @next_buffer_table: First available buffer table id
  * @n_rx_queues: Number of RX queues
  * @n_channels: Number of channels in use
  * @rx_buffer_len: RX buffer length
  * @rx_buffer_order: Order (log2) of number of pages for each RX buffer
+ * @int_error_count: Number of internal errors seen recently
+ * @int_error_expire: Time at which error count will be expired
  * @irq_status: Interrupt status buffer
  * @last_irq_cpu: Last CPU to handle interrupt.
  *	This register is written with the SMP processor ID whenever an
@@ -784,11 +766,15 @@
 	struct efx_rx_queue rx_queue[EFX_MAX_RX_QUEUES];
 	struct efx_channel channel[EFX_MAX_CHANNELS];
 
+	unsigned next_buffer_table;
 	int n_rx_queues;
 	int n_channels;
 	unsigned int rx_buffer_len;
 	unsigned int rx_buffer_order;
 
+	unsigned int_error_count;
+	unsigned long int_error_expire;
+
 	struct efx_buffer irq_status;
 	volatile signed int last_irq_cpu;
 
@@ -869,14 +855,7 @@
  * @buf_tbl_base: Buffer table base address
  * @evq_ptr_tbl_base: Event queue pointer table base address
  * @evq_rptr_tbl_base: Event queue read-pointer table base address
- * @txd_ring_mask: TX descriptor ring size - 1 (must be a power of two - 1)
- * @rxd_ring_mask: RX descriptor ring size - 1 (must be a power of two - 1)
- * @evq_size: Event queue size (must be a power of two)
  * @max_dma_mask: Maximum possible DMA mask
- * @tx_dma_mask: TX DMA mask
- * @bug5391_mask: Address mask for bug 5391 workaround
- * @rx_xoff_thresh: RX FIFO XOFF watermark (bytes)
- * @rx_xon_thresh: RX FIFO XON watermark (bytes)
  * @rx_buffer_padding: Padding added to each RX buffer
  * @max_interrupt_mode: Highest capability interrupt mode supported
  *	from &enum efx_init_mode.
@@ -892,15 +871,8 @@
 	unsigned int evq_ptr_tbl_base;
 	unsigned int evq_rptr_tbl_base;
 
-	unsigned int txd_ring_mask;
-	unsigned int rxd_ring_mask;
-	unsigned int evq_size;
 	u64 max_dma_mask;
-	unsigned int tx_dma_mask;
-	unsigned bug5391_mask;
 
-	int rx_xoff_thresh;
-	int rx_xon_thresh;
 	unsigned int rx_buffer_padding;
 	unsigned int max_interrupt_mode;
 	unsigned int phys_addr_channels;
diff --git a/drivers/net/sfc/phy.h b/drivers/net/sfc/phy.h
index c1cff9c..b5150f3 100644
--- a/drivers/net/sfc/phy.h
+++ b/drivers/net/sfc/phy.h
@@ -23,9 +23,9 @@
 extern int sft9001_wait_boot(struct efx_nic *efx);
 
 /****************************************************************************
- * AMCC/Quake QT20xx PHYs
+ * AMCC/Quake QT202x PHYs
  */
-extern struct efx_phy_operations falcon_xfp_phy_ops;
+extern struct efx_phy_operations falcon_qt202x_phy_ops;
 
 /* These PHYs provide various H/W control states for LEDs */
 #define QUAKE_LED_LINK_INVAL	(0)
@@ -39,6 +39,6 @@
 #define QUAKE_LED_TXLINK	(0)
 #define QUAKE_LED_RXLINK	(8)
 
-extern void xfp_set_led(struct efx_nic *p, int led, int state);
+extern void falcon_qt202x_set_led(struct efx_nic *p, int led, int state);
 
 #endif
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/qt202x_phy.c
similarity index 73%
rename from drivers/net/sfc/xfp_phy.c
rename to drivers/net/sfc/qt202x_phy.c
index e6b3d5e..560eb18 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/qt202x_phy.c
@@ -7,8 +7,7 @@
  * by the Free Software Foundation, incorporated herein by reference.
  */
 /*
- * Driver for SFP+ and XFP optical PHYs plus some support specific to the
- * AMCC QT20xx adapters; see www.amcc.com for details
+ * Driver for AMCC QT202x SFP+ and XFP adapters; see www.amcc.com for details
  */
 
 #include <linux/timer.h>
@@ -18,13 +17,13 @@
 #include "phy.h"
 #include "falcon.h"
 
-#define XFP_REQUIRED_DEVS (MDIO_DEVS_PCS |	\
-			   MDIO_DEVS_PMAPMD |	\
-			   MDIO_DEVS_PHYXS)
+#define QT202X_REQUIRED_DEVS (MDIO_DEVS_PCS |		\
+			      MDIO_DEVS_PMAPMD |	\
+			      MDIO_DEVS_PHYXS)
 
-#define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
-		       (1 << LOOPBACK_PMAPMD) |		\
-		       (1 << LOOPBACK_NETWORK))
+#define QT202X_LOOPBACKS ((1 << LOOPBACK_PCS) |		\
+			  (1 << LOOPBACK_PMAPMD) |	\
+			  (1 << LOOPBACK_NETWORK))
 
 /****************************************************************************/
 /* Quake-specific MDIO registers */
@@ -45,18 +44,18 @@
 #define PCS_VEND1_REG	   	0xc000
 #define PCS_VEND1_LBTXD_LBN	5
 
-void xfp_set_led(struct efx_nic *p, int led, int mode)
+void falcon_qt202x_set_led(struct efx_nic *p, int led, int mode)
 {
 	int addr = MDIO_QUAKE_LED0_REG + led;
 	efx_mdio_write(p, MDIO_MMD_PMAPMD, addr, mode);
 }
 
-struct xfp_phy_data {
+struct qt202x_phy_data {
 	enum efx_phy_mode phy_mode;
 };
 
-#define XFP_MAX_RESET_TIME 500
-#define XFP_RESET_WAIT 10
+#define QT2022C2_MAX_RESET_TIME 500
+#define QT2022C2_RESET_WAIT 10
 
 static int qt2025c_wait_reset(struct efx_nic *efx)
 {
@@ -97,7 +96,7 @@
 	return 0;
 }
 
-static int xfp_reset_phy(struct efx_nic *efx)
+static int qt202x_reset_phy(struct efx_nic *efx)
 {
 	int rc;
 
@@ -111,8 +110,9 @@
 		/* Reset the PHYXS MMD. This is documented as doing
 		 * a complete soft reset. */
 		rc = efx_mdio_reset_mmd(efx, MDIO_MMD_PHYXS,
-					XFP_MAX_RESET_TIME / XFP_RESET_WAIT,
-					XFP_RESET_WAIT);
+					QT2022C2_MAX_RESET_TIME /
+					QT2022C2_RESET_WAIT,
+					QT2022C2_RESET_WAIT);
 		if (rc < 0)
 			goto fail;
 	}
@@ -122,7 +122,7 @@
 
 	/* Check that all the MMDs we expect are present and responding. We
 	 * expect faults on some if the link is down, but not on the PHY XS */
-	rc = efx_mdio_check_mmds(efx, XFP_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
+	rc = efx_mdio_check_mmds(efx, QT202X_REQUIRED_DEVS, MDIO_DEVS_PHYXS);
 	if (rc < 0)
 		goto fail;
 
@@ -135,13 +135,13 @@
 	return rc;
 }
 
-static int xfp_phy_init(struct efx_nic *efx)
+static int qt202x_phy_init(struct efx_nic *efx)
 {
-	struct xfp_phy_data *phy_data;
+	struct qt202x_phy_data *phy_data;
 	u32 devid = efx_mdio_read_id(efx, MDIO_MMD_PHYXS);
 	int rc;
 
-	phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
+	phy_data = kzalloc(sizeof(struct qt202x_phy_data), GFP_KERNEL);
 	if (!phy_data)
 		return -ENOMEM;
 	efx->phy_data = phy_data;
@@ -152,7 +152,7 @@
 
 	phy_data->phy_mode = efx->phy_mode;
 
-	rc = xfp_reset_phy(efx);
+	rc = qt202x_reset_phy(efx);
 
 	EFX_INFO(efx, "PHY init %s.\n",
 		 rc ? "failed" : "successful");
@@ -167,28 +167,28 @@
 	return rc;
 }
 
-static void xfp_phy_clear_interrupt(struct efx_nic *efx)
+static void qt202x_phy_clear_interrupt(struct efx_nic *efx)
 {
 	/* Read to clear link status alarm */
 	efx_mdio_read(efx, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT);
 }
 
-static int xfp_link_ok(struct efx_nic *efx)
+static int qt202x_link_ok(struct efx_nic *efx)
 {
-	return efx_mdio_links_ok(efx, XFP_REQUIRED_DEVS);
+	return efx_mdio_links_ok(efx, QT202X_REQUIRED_DEVS);
 }
 
-static void xfp_phy_poll(struct efx_nic *efx)
+static void qt202x_phy_poll(struct efx_nic *efx)
 {
-	int link_up = xfp_link_ok(efx);
+	int link_up = qt202x_link_ok(efx);
 	/* Simulate a PHY event if link state has changed */
 	if (link_up != efx->link_up)
 		falcon_sim_phy_event(efx);
 }
 
-static void xfp_phy_reconfigure(struct efx_nic *efx)
+static void qt202x_phy_reconfigure(struct efx_nic *efx)
 {
-	struct xfp_phy_data *phy_data = efx->phy_data;
+	struct qt202x_phy_data *phy_data = efx->phy_data;
 
 	if (efx->phy_type == PHY_TYPE_QT2025C) {
 		/* There are several different register bits which can
@@ -207,7 +207,7 @@
 		/* Reset the PHY when moving from tx off to tx on */
 		if (!(efx->phy_mode & PHY_MODE_TX_DISABLED) &&
 		    (phy_data->phy_mode & PHY_MODE_TX_DISABLED))
-			xfp_reset_phy(efx);
+			qt202x_reset_phy(efx);
 
 		efx_mdio_transmit_disable(efx);
 	}
@@ -215,18 +215,18 @@
 	efx_mdio_phy_reconfigure(efx);
 
 	phy_data->phy_mode = efx->phy_mode;
-	efx->link_up = xfp_link_ok(efx);
+	efx->link_up = qt202x_link_ok(efx);
 	efx->link_speed = 10000;
 	efx->link_fd = true;
 	efx->link_fc = efx->wanted_fc;
 }
 
-static void xfp_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static void qt202x_phy_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
 {
 	mdio45_ethtool_gset(&efx->mdio, ecmd);
 }
 
-static void xfp_phy_fini(struct efx_nic *efx)
+static void qt202x_phy_fini(struct efx_nic *efx)
 {
 	/* Clobber the LED if it was blinking */
 	efx->board_info.blink(efx, false);
@@ -236,15 +236,15 @@
 	efx->phy_data = NULL;
 }
 
-struct efx_phy_operations falcon_xfp_phy_ops = {
+struct efx_phy_operations falcon_qt202x_phy_ops = {
 	.macs		 = EFX_XMAC,
-	.init            = xfp_phy_init,
-	.reconfigure     = xfp_phy_reconfigure,
-	.poll            = xfp_phy_poll,
-	.fini            = xfp_phy_fini,
-	.clear_interrupt = xfp_phy_clear_interrupt,
-	.get_settings    = xfp_phy_get_settings,
+	.init		 = qt202x_phy_init,
+	.reconfigure	 = qt202x_phy_reconfigure,
+	.poll	     	 = qt202x_phy_poll,
+	.fini	  	 = qt202x_phy_fini,
+	.clear_interrupt = qt202x_phy_clear_interrupt,
+	.get_settings	 = qt202x_phy_get_settings,
 	.set_settings	 = efx_mdio_set_settings,
-	.mmds            = XFP_REQUIRED_DEVS,
-	.loopbacks       = XFP_LOOPBACKS,
+	.mmds            = QT202X_REQUIRED_DEVS,
+	.loopbacks       = QT202X_LOOPBACKS,
 };
diff --git a/drivers/net/sfc/regs.h b/drivers/net/sfc/regs.h
new file mode 100644
index 0000000..f336d83
--- /dev/null
+++ b/drivers/net/sfc/regs.h
@@ -0,0 +1,3180 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2009 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_REGS_H
+#define EFX_REGS_H
+
+/*
+ * Falcon hardware architecture definitions have a name prefix following
+ * the format:
+ *
+ *     F<type>_<min-rev><max-rev>_
+ *
+ * The following <type> strings are used:
+ *
+ *             MMIO register  MC register  Host memory structure
+ * -------------------------------------------------------------
+ * Address     R              MCR
+ * Bitfield    RF             MCRF         SF
+ * Enumerator  FE             MCFE         SE
+ *
+ * <min-rev> is the first revision to which the definition applies:
+ *
+ *     A: Falcon A1 (SFC4000AB)
+ *     B: Falcon B0 (SFC4000BA)
+ *     C: Siena A0 (SFL9021AA)
+ *
+ * If the definition has been changed or removed in later revisions
+ * then <max-rev> is the last revision to which the definition applies;
+ * otherwise it is "Z".
+ */
+
+/**************************************************************************
+ *
+ * Falcon/Siena registers and descriptors
+ *
+ **************************************************************************
+ */
+
+/* ADR_REGION_REG: Address region register */
+#define	FR_AZ_ADR_REGION 0x00000000
+#define	FRF_AZ_ADR_REGION3_LBN 96
+#define	FRF_AZ_ADR_REGION3_WIDTH 18
+#define	FRF_AZ_ADR_REGION2_LBN 64
+#define	FRF_AZ_ADR_REGION2_WIDTH 18
+#define	FRF_AZ_ADR_REGION1_LBN 32
+#define	FRF_AZ_ADR_REGION1_WIDTH 18
+#define	FRF_AZ_ADR_REGION0_LBN 0
+#define	FRF_AZ_ADR_REGION0_WIDTH 18
+
+/* INT_EN_REG_KER: Kernel driver Interrupt enable register */
+#define	FR_AZ_INT_EN_KER 0x00000010
+#define	FRF_AZ_KER_INT_LEVE_SEL_LBN 8
+#define	FRF_AZ_KER_INT_LEVE_SEL_WIDTH 6
+#define	FRF_AZ_KER_INT_CHAR_LBN 4
+#define	FRF_AZ_KER_INT_CHAR_WIDTH 1
+#define	FRF_AZ_KER_INT_KER_LBN 3
+#define	FRF_AZ_KER_INT_KER_WIDTH 1
+#define	FRF_AZ_DRV_INT_EN_KER_LBN 0
+#define	FRF_AZ_DRV_INT_EN_KER_WIDTH 1
+
+/* INT_EN_REG_CHAR: Char Driver interrupt enable register */
+#define	FR_BZ_INT_EN_CHAR 0x00000020
+#define	FRF_BZ_CHAR_INT_LEVE_SEL_LBN 8
+#define	FRF_BZ_CHAR_INT_LEVE_SEL_WIDTH 6
+#define	FRF_BZ_CHAR_INT_CHAR_LBN 4
+#define	FRF_BZ_CHAR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_CHAR_INT_KER_LBN 3
+#define	FRF_BZ_CHAR_INT_KER_WIDTH 1
+#define	FRF_BZ_DRV_INT_EN_CHAR_LBN 0
+#define	FRF_BZ_DRV_INT_EN_CHAR_WIDTH 1
+
+/* INT_ADR_REG_KER: Interrupt host address for Kernel driver */
+#define	FR_AZ_INT_ADR_KER 0x00000030
+#define	FRF_AZ_NORM_INT_VEC_DIS_KER_LBN 64
+#define	FRF_AZ_NORM_INT_VEC_DIS_KER_WIDTH 1
+#define	FRF_AZ_INT_ADR_KER_LBN 0
+#define	FRF_AZ_INT_ADR_KER_WIDTH 64
+
+/* INT_ADR_REG_CHAR: Interrupt host address for Char driver */
+#define	FR_BZ_INT_ADR_CHAR 0x00000040
+#define	FRF_BZ_NORM_INT_VEC_DIS_CHAR_LBN 64
+#define	FRF_BZ_NORM_INT_VEC_DIS_CHAR_WIDTH 1
+#define	FRF_BZ_INT_ADR_CHAR_LBN 0
+#define	FRF_BZ_INT_ADR_CHAR_WIDTH 64
+
+/* INT_ACK_KER: Kernel interrupt acknowledge register */
+#define	FR_AA_INT_ACK_KER 0x00000050
+#define	FRF_AA_INT_ACK_KER_FIELD_LBN 0
+#define	FRF_AA_INT_ACK_KER_FIELD_WIDTH 32
+
+/* INT_ISR0_REG: Function 0 Interrupt Acknowlege Status register */
+#define	FR_BZ_INT_ISR0 0x00000090
+#define	FRF_BZ_INT_ISR_REG_LBN 0
+#define	FRF_BZ_INT_ISR_REG_WIDTH 64
+
+/* HW_INIT_REG: Hardware initialization register */
+#define	FR_AZ_HW_INIT 0x000000c0
+#define	FRF_BB_BDMRD_CPLF_FULL_LBN 124
+#define	FRF_BB_BDMRD_CPLF_FULL_WIDTH 1
+#define	FRF_BB_PCIE_CPL_TIMEOUT_CTRL_LBN 121
+#define	FRF_BB_PCIE_CPL_TIMEOUT_CTRL_WIDTH 3
+#define	FRF_CZ_TX_MRG_TAGS_LBN 120
+#define	FRF_CZ_TX_MRG_TAGS_WIDTH 1
+#define	FRF_AB_TRGT_MASK_ALL_LBN 100
+#define	FRF_AB_TRGT_MASK_ALL_WIDTH 1
+#define	FRF_AZ_DOORBELL_DROP_LBN 92
+#define	FRF_AZ_DOORBELL_DROP_WIDTH 8
+#define	FRF_AB_TX_RREQ_MASK_EN_LBN 76
+#define	FRF_AB_TX_RREQ_MASK_EN_WIDTH 1
+#define	FRF_AB_PE_EIDLE_DIS_LBN 75
+#define	FRF_AB_PE_EIDLE_DIS_WIDTH 1
+#define	FRF_AA_FC_BLOCKING_EN_LBN 45
+#define	FRF_AA_FC_BLOCKING_EN_WIDTH 1
+#define	FRF_BZ_B2B_REQ_EN_LBN 45
+#define	FRF_BZ_B2B_REQ_EN_WIDTH 1
+#define	FRF_AA_B2B_REQ_EN_LBN 44
+#define	FRF_AA_B2B_REQ_EN_WIDTH 1
+#define	FRF_BB_FC_BLOCKING_EN_LBN 44
+#define	FRF_BB_FC_BLOCKING_EN_WIDTH 1
+#define	FRF_AZ_POST_WR_MASK_LBN 40
+#define	FRF_AZ_POST_WR_MASK_WIDTH 4
+#define	FRF_AZ_TLP_TC_LBN 34
+#define	FRF_AZ_TLP_TC_WIDTH 3
+#define	FRF_AZ_TLP_ATTR_LBN 32
+#define	FRF_AZ_TLP_ATTR_WIDTH 2
+#define	FRF_AB_INTB_VEC_LBN 24
+#define	FRF_AB_INTB_VEC_WIDTH 5
+#define	FRF_AB_INTA_VEC_LBN 16
+#define	FRF_AB_INTA_VEC_WIDTH 5
+#define	FRF_AZ_WD_TIMER_LBN 8
+#define	FRF_AZ_WD_TIMER_WIDTH 8
+#define	FRF_AZ_US_DISABLE_LBN 5
+#define	FRF_AZ_US_DISABLE_WIDTH 1
+#define	FRF_AZ_TLP_EP_LBN 4
+#define	FRF_AZ_TLP_EP_WIDTH 1
+#define	FRF_AZ_ATTR_SEL_LBN 3
+#define	FRF_AZ_ATTR_SEL_WIDTH 1
+#define	FRF_AZ_TD_SEL_LBN 1
+#define	FRF_AZ_TD_SEL_WIDTH 1
+#define	FRF_AZ_TLP_TD_LBN 0
+#define	FRF_AZ_TLP_TD_WIDTH 1
+
+/* EE_SPI_HCMD_REG: SPI host command register */
+#define	FR_AB_EE_SPI_HCMD 0x00000100
+#define	FRF_AB_EE_SPI_HCMD_CMD_EN_LBN 31
+#define	FRF_AB_EE_SPI_HCMD_CMD_EN_WIDTH 1
+#define	FRF_AB_EE_WR_TIMER_ACTIVE_LBN 28
+#define	FRF_AB_EE_WR_TIMER_ACTIVE_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_SF_SEL_LBN 24
+#define	FRF_AB_EE_SPI_HCMD_SF_SEL_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_DABCNT_LBN 16
+#define	FRF_AB_EE_SPI_HCMD_DABCNT_WIDTH 5
+#define	FRF_AB_EE_SPI_HCMD_READ_LBN 15
+#define	FRF_AB_EE_SPI_HCMD_READ_WIDTH 1
+#define	FRF_AB_EE_SPI_HCMD_DUBCNT_LBN 12
+#define	FRF_AB_EE_SPI_HCMD_DUBCNT_WIDTH 2
+#define	FRF_AB_EE_SPI_HCMD_ADBCNT_LBN 8
+#define	FRF_AB_EE_SPI_HCMD_ADBCNT_WIDTH 2
+#define	FRF_AB_EE_SPI_HCMD_ENC_LBN 0
+#define	FRF_AB_EE_SPI_HCMD_ENC_WIDTH 8
+
+/* USR_EV_CFG: User Level Event Configuration register */
+#define	FR_CZ_USR_EV_CFG 0x00000100
+#define	FRF_CZ_USREV_DIS_LBN 16
+#define	FRF_CZ_USREV_DIS_WIDTH 1
+#define	FRF_CZ_DFLT_EVQ_LBN 0
+#define	FRF_CZ_DFLT_EVQ_WIDTH 10
+
+/* EE_SPI_HADR_REG: SPI host address register */
+#define	FR_AB_EE_SPI_HADR 0x00000110
+#define	FRF_AB_EE_SPI_HADR_DUBYTE_LBN 24
+#define	FRF_AB_EE_SPI_HADR_DUBYTE_WIDTH 8
+#define	FRF_AB_EE_SPI_HADR_ADR_LBN 0
+#define	FRF_AB_EE_SPI_HADR_ADR_WIDTH 24
+
+/* EE_SPI_HDATA_REG: SPI host data register */
+#define	FR_AB_EE_SPI_HDATA 0x00000120
+#define	FRF_AB_EE_SPI_HDATA3_LBN 96
+#define	FRF_AB_EE_SPI_HDATA3_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA2_LBN 64
+#define	FRF_AB_EE_SPI_HDATA2_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA1_LBN 32
+#define	FRF_AB_EE_SPI_HDATA1_WIDTH 32
+#define	FRF_AB_EE_SPI_HDATA0_LBN 0
+#define	FRF_AB_EE_SPI_HDATA0_WIDTH 32
+
+/* EE_BASE_PAGE_REG: Expansion ROM base mirror register */
+#define	FR_AB_EE_BASE_PAGE 0x00000130
+#define	FRF_AB_EE_EXPROM_MASK_LBN 16
+#define	FRF_AB_EE_EXPROM_MASK_WIDTH 13
+#define	FRF_AB_EE_EXP_ROM_WINDOW_BASE_LBN 0
+#define	FRF_AB_EE_EXP_ROM_WINDOW_BASE_WIDTH 13
+
+/* EE_VPD_CFG0_REG: SPI/VPD configuration register 0 */
+#define	FR_AB_EE_VPD_CFG0 0x00000140
+#define	FRF_AB_EE_SF_FASTRD_EN_LBN 127
+#define	FRF_AB_EE_SF_FASTRD_EN_WIDTH 1
+#define	FRF_AB_EE_SF_CLOCK_DIV_LBN 120
+#define	FRF_AB_EE_SF_CLOCK_DIV_WIDTH 7
+#define	FRF_AB_EE_VPD_WIP_POLL_LBN 119
+#define	FRF_AB_EE_VPD_WIP_POLL_WIDTH 1
+#define	FRF_AB_EE_EE_CLOCK_DIV_LBN 112
+#define	FRF_AB_EE_EE_CLOCK_DIV_WIDTH 7
+#define	FRF_AB_EE_EE_WR_TMR_VALUE_LBN 96
+#define	FRF_AB_EE_EE_WR_TMR_VALUE_WIDTH 16
+#define	FRF_AB_EE_VPDW_LENGTH_LBN 80
+#define	FRF_AB_EE_VPDW_LENGTH_WIDTH 15
+#define	FRF_AB_EE_VPDW_BASE_LBN 64
+#define	FRF_AB_EE_VPDW_BASE_WIDTH 15
+#define	FRF_AB_EE_VPD_WR_CMD_EN_LBN 56
+#define	FRF_AB_EE_VPD_WR_CMD_EN_WIDTH 8
+#define	FRF_AB_EE_VPD_BASE_LBN 32
+#define	FRF_AB_EE_VPD_BASE_WIDTH 24
+#define	FRF_AB_EE_VPD_LENGTH_LBN 16
+#define	FRF_AB_EE_VPD_LENGTH_WIDTH 15
+#define	FRF_AB_EE_VPD_AD_SIZE_LBN 8
+#define	FRF_AB_EE_VPD_AD_SIZE_WIDTH 5
+#define	FRF_AB_EE_VPD_ACCESS_ON_LBN 5
+#define	FRF_AB_EE_VPD_ACCESS_ON_WIDTH 1
+#define	FRF_AB_EE_VPD_ACCESS_BLOCK_LBN 4
+#define	FRF_AB_EE_VPD_ACCESS_BLOCK_WIDTH 1
+#define	FRF_AB_EE_VPD_DEV_SF_SEL_LBN 2
+#define	FRF_AB_EE_VPD_DEV_SF_SEL_WIDTH 1
+#define	FRF_AB_EE_VPD_EN_AD9_MODE_LBN 1
+#define	FRF_AB_EE_VPD_EN_AD9_MODE_WIDTH 1
+#define	FRF_AB_EE_VPD_EN_LBN 0
+#define	FRF_AB_EE_VPD_EN_WIDTH 1
+
+/* EE_VPD_SW_CNTL_REG: VPD access SW control register */
+#define	FR_AB_EE_VPD_SW_CNTL 0x00000150
+#define	FRF_AB_EE_VPD_CYCLE_PENDING_LBN 31
+#define	FRF_AB_EE_VPD_CYCLE_PENDING_WIDTH 1
+#define	FRF_AB_EE_VPD_CYC_WRITE_LBN 28
+#define	FRF_AB_EE_VPD_CYC_WRITE_WIDTH 1
+#define	FRF_AB_EE_VPD_CYC_ADR_LBN 0
+#define	FRF_AB_EE_VPD_CYC_ADR_WIDTH 15
+
+/* EE_VPD_SW_DATA_REG: VPD access SW data register */
+#define	FR_AB_EE_VPD_SW_DATA 0x00000160
+#define	FRF_AB_EE_VPD_CYC_DAT_LBN 0
+#define	FRF_AB_EE_VPD_CYC_DAT_WIDTH 32
+
+/* PBMX_DBG_IADDR_REG: Capture Module address register */
+#define	FR_CZ_PBMX_DBG_IADDR 0x000001f0
+#define	FRF_CZ_PBMX_DBG_IADDR_LBN 0
+#define	FRF_CZ_PBMX_DBG_IADDR_WIDTH 32
+
+/* PCIE_CORE_INDIRECT_REG: Indirect Access to PCIE Core registers */
+#define	FR_BB_PCIE_CORE_INDIRECT 0x000001f0
+#define	FRF_BB_PCIE_CORE_TARGET_DATA_LBN 32
+#define	FRF_BB_PCIE_CORE_TARGET_DATA_WIDTH 32
+#define	FRF_BB_PCIE_CORE_INDIRECT_ACCESS_DIR_LBN 15
+#define	FRF_BB_PCIE_CORE_INDIRECT_ACCESS_DIR_WIDTH 1
+#define	FRF_BB_PCIE_CORE_TARGET_REG_ADRS_LBN 0
+#define	FRF_BB_PCIE_CORE_TARGET_REG_ADRS_WIDTH 12
+
+/* PBMX_DBG_IDATA_REG: Capture Module data register */
+#define	FR_CZ_PBMX_DBG_IDATA 0x000001f8
+#define	FRF_CZ_PBMX_DBG_IDATA_LBN 0
+#define	FRF_CZ_PBMX_DBG_IDATA_WIDTH 64
+
+/* NIC_STAT_REG: NIC status register */
+#define	FR_AB_NIC_STAT 0x00000200
+#define	FRF_BB_AER_DIS_LBN 34
+#define	FRF_BB_AER_DIS_WIDTH 1
+#define	FRF_BB_EE_STRAP_EN_LBN 31
+#define	FRF_BB_EE_STRAP_EN_WIDTH 1
+#define	FRF_BB_EE_STRAP_LBN 24
+#define	FRF_BB_EE_STRAP_WIDTH 4
+#define	FRF_BB_REVISION_ID_LBN 17
+#define	FRF_BB_REVISION_ID_WIDTH 7
+#define	FRF_AB_ONCHIP_SRAM_LBN 16
+#define	FRF_AB_ONCHIP_SRAM_WIDTH 1
+#define	FRF_AB_SF_PRST_LBN 9
+#define	FRF_AB_SF_PRST_WIDTH 1
+#define	FRF_AB_EE_PRST_LBN 8
+#define	FRF_AB_EE_PRST_WIDTH 1
+#define	FRF_AB_ATE_MODE_LBN 3
+#define	FRF_AB_ATE_MODE_WIDTH 1
+#define	FRF_AB_STRAP_PINS_LBN 0
+#define	FRF_AB_STRAP_PINS_WIDTH 3
+
+/* GPIO_CTL_REG: GPIO control register */
+#define	FR_AB_GPIO_CTL 0x00000210
+#define	FRF_AB_GPIO_OUT3_LBN 112
+#define	FRF_AB_GPIO_OUT3_WIDTH 16
+#define	FRF_AB_GPIO_IN3_LBN 104
+#define	FRF_AB_GPIO_IN3_WIDTH 8
+#define	FRF_AB_GPIO_PWRUP_VALUE3_LBN 96
+#define	FRF_AB_GPIO_PWRUP_VALUE3_WIDTH 8
+#define	FRF_AB_GPIO_OUT2_LBN 80
+#define	FRF_AB_GPIO_OUT2_WIDTH 16
+#define	FRF_AB_GPIO_IN2_LBN 72
+#define	FRF_AB_GPIO_IN2_WIDTH 8
+#define	FRF_AB_GPIO_PWRUP_VALUE2_LBN 64
+#define	FRF_AB_GPIO_PWRUP_VALUE2_WIDTH 8
+#define	FRF_AB_GPIO15_OEN_LBN 63
+#define	FRF_AB_GPIO15_OEN_WIDTH 1
+#define	FRF_AB_GPIO14_OEN_LBN 62
+#define	FRF_AB_GPIO14_OEN_WIDTH 1
+#define	FRF_AB_GPIO13_OEN_LBN 61
+#define	FRF_AB_GPIO13_OEN_WIDTH 1
+#define	FRF_AB_GPIO12_OEN_LBN 60
+#define	FRF_AB_GPIO12_OEN_WIDTH 1
+#define	FRF_AB_GPIO11_OEN_LBN 59
+#define	FRF_AB_GPIO11_OEN_WIDTH 1
+#define	FRF_AB_GPIO10_OEN_LBN 58
+#define	FRF_AB_GPIO10_OEN_WIDTH 1
+#define	FRF_AB_GPIO9_OEN_LBN 57
+#define	FRF_AB_GPIO9_OEN_WIDTH 1
+#define	FRF_AB_GPIO8_OEN_LBN 56
+#define	FRF_AB_GPIO8_OEN_WIDTH 1
+#define	FRF_AB_GPIO15_OUT_LBN 55
+#define	FRF_AB_GPIO15_OUT_WIDTH 1
+#define	FRF_AB_GPIO14_OUT_LBN 54
+#define	FRF_AB_GPIO14_OUT_WIDTH 1
+#define	FRF_AB_GPIO13_OUT_LBN 53
+#define	FRF_AB_GPIO13_OUT_WIDTH 1
+#define	FRF_AB_GPIO12_OUT_LBN 52
+#define	FRF_AB_GPIO12_OUT_WIDTH 1
+#define	FRF_AB_GPIO11_OUT_LBN 51
+#define	FRF_AB_GPIO11_OUT_WIDTH 1
+#define	FRF_AB_GPIO10_OUT_LBN 50
+#define	FRF_AB_GPIO10_OUT_WIDTH 1
+#define	FRF_AB_GPIO9_OUT_LBN 49
+#define	FRF_AB_GPIO9_OUT_WIDTH 1
+#define	FRF_AB_GPIO8_OUT_LBN 48
+#define	FRF_AB_GPIO8_OUT_WIDTH 1
+#define	FRF_AB_GPIO15_IN_LBN 47
+#define	FRF_AB_GPIO15_IN_WIDTH 1
+#define	FRF_AB_GPIO14_IN_LBN 46
+#define	FRF_AB_GPIO14_IN_WIDTH 1
+#define	FRF_AB_GPIO13_IN_LBN 45
+#define	FRF_AB_GPIO13_IN_WIDTH 1
+#define	FRF_AB_GPIO12_IN_LBN 44
+#define	FRF_AB_GPIO12_IN_WIDTH 1
+#define	FRF_AB_GPIO11_IN_LBN 43
+#define	FRF_AB_GPIO11_IN_WIDTH 1
+#define	FRF_AB_GPIO10_IN_LBN 42
+#define	FRF_AB_GPIO10_IN_WIDTH 1
+#define	FRF_AB_GPIO9_IN_LBN 41
+#define	FRF_AB_GPIO9_IN_WIDTH 1
+#define	FRF_AB_GPIO8_IN_LBN 40
+#define	FRF_AB_GPIO8_IN_WIDTH 1
+#define	FRF_AB_GPIO15_PWRUP_VALUE_LBN 39
+#define	FRF_AB_GPIO15_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO14_PWRUP_VALUE_LBN 38
+#define	FRF_AB_GPIO14_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO13_PWRUP_VALUE_LBN 37
+#define	FRF_AB_GPIO13_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO12_PWRUP_VALUE_LBN 36
+#define	FRF_AB_GPIO12_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO11_PWRUP_VALUE_LBN 35
+#define	FRF_AB_GPIO11_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO10_PWRUP_VALUE_LBN 34
+#define	FRF_AB_GPIO10_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO9_PWRUP_VALUE_LBN 33
+#define	FRF_AB_GPIO9_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO8_PWRUP_VALUE_LBN 32
+#define	FRF_AB_GPIO8_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_CLK156_OUT_EN_LBN 31
+#define	FRF_AB_CLK156_OUT_EN_WIDTH 1
+#define	FRF_AB_USE_NIC_CLK_LBN 30
+#define	FRF_AB_USE_NIC_CLK_WIDTH 1
+#define	FRF_AB_GPIO5_OEN_LBN 29
+#define	FRF_AB_GPIO5_OEN_WIDTH 1
+#define	FRF_AB_GPIO4_OEN_LBN 28
+#define	FRF_AB_GPIO4_OEN_WIDTH 1
+#define	FRF_AB_GPIO3_OEN_LBN 27
+#define	FRF_AB_GPIO3_OEN_WIDTH 1
+#define	FRF_AB_GPIO2_OEN_LBN 26
+#define	FRF_AB_GPIO2_OEN_WIDTH 1
+#define	FRF_AB_GPIO1_OEN_LBN 25
+#define	FRF_AB_GPIO1_OEN_WIDTH 1
+#define	FRF_AB_GPIO0_OEN_LBN 24
+#define	FRF_AB_GPIO0_OEN_WIDTH 1
+#define	FRF_AB_GPIO7_OUT_LBN 23
+#define	FRF_AB_GPIO7_OUT_WIDTH 1
+#define	FRF_AB_GPIO6_OUT_LBN 22
+#define	FRF_AB_GPIO6_OUT_WIDTH 1
+#define	FRF_AB_GPIO5_OUT_LBN 21
+#define	FRF_AB_GPIO5_OUT_WIDTH 1
+#define	FRF_AB_GPIO4_OUT_LBN 20
+#define	FRF_AB_GPIO4_OUT_WIDTH 1
+#define	FRF_AB_GPIO3_OUT_LBN 19
+#define	FRF_AB_GPIO3_OUT_WIDTH 1
+#define	FRF_AB_GPIO2_OUT_LBN 18
+#define	FRF_AB_GPIO2_OUT_WIDTH 1
+#define	FRF_AB_GPIO1_OUT_LBN 17
+#define	FRF_AB_GPIO1_OUT_WIDTH 1
+#define	FRF_AB_GPIO0_OUT_LBN 16
+#define	FRF_AB_GPIO0_OUT_WIDTH 1
+#define	FRF_AB_GPIO7_IN_LBN 15
+#define	FRF_AB_GPIO7_IN_WIDTH 1
+#define	FRF_AB_GPIO6_IN_LBN 14
+#define	FRF_AB_GPIO6_IN_WIDTH 1
+#define	FRF_AB_GPIO5_IN_LBN 13
+#define	FRF_AB_GPIO5_IN_WIDTH 1
+#define	FRF_AB_GPIO4_IN_LBN 12
+#define	FRF_AB_GPIO4_IN_WIDTH 1
+#define	FRF_AB_GPIO3_IN_LBN 11
+#define	FRF_AB_GPIO3_IN_WIDTH 1
+#define	FRF_AB_GPIO2_IN_LBN 10
+#define	FRF_AB_GPIO2_IN_WIDTH 1
+#define	FRF_AB_GPIO1_IN_LBN 9
+#define	FRF_AB_GPIO1_IN_WIDTH 1
+#define	FRF_AB_GPIO0_IN_LBN 8
+#define	FRF_AB_GPIO0_IN_WIDTH 1
+#define	FRF_AB_GPIO7_PWRUP_VALUE_LBN 7
+#define	FRF_AB_GPIO7_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO6_PWRUP_VALUE_LBN 6
+#define	FRF_AB_GPIO6_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO5_PWRUP_VALUE_LBN 5
+#define	FRF_AB_GPIO5_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO4_PWRUP_VALUE_LBN 4
+#define	FRF_AB_GPIO4_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO3_PWRUP_VALUE_LBN 3
+#define	FRF_AB_GPIO3_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO2_PWRUP_VALUE_LBN 2
+#define	FRF_AB_GPIO2_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO1_PWRUP_VALUE_LBN 1
+#define	FRF_AB_GPIO1_PWRUP_VALUE_WIDTH 1
+#define	FRF_AB_GPIO0_PWRUP_VALUE_LBN 0
+#define	FRF_AB_GPIO0_PWRUP_VALUE_WIDTH 1
+
+/* GLB_CTL_REG: Global control register */
+#define	FR_AB_GLB_CTL 0x00000220
+#define	FRF_AB_EXT_PHY_RST_CTL_LBN 63
+#define	FRF_AB_EXT_PHY_RST_CTL_WIDTH 1
+#define	FRF_AB_XAUI_SD_RST_CTL_LBN 62
+#define	FRF_AB_XAUI_SD_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_SD_RST_CTL_LBN 61
+#define	FRF_AB_PCIE_SD_RST_CTL_WIDTH 1
+#define	FRF_AA_PCIX_RST_CTL_LBN 60
+#define	FRF_AA_PCIX_RST_CTL_WIDTH 1
+#define	FRF_BB_BIU_RST_CTL_LBN 60
+#define	FRF_BB_BIU_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_STKY_RST_CTL_LBN 59
+#define	FRF_AB_PCIE_STKY_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_NSTKY_RST_CTL_LBN 58
+#define	FRF_AB_PCIE_NSTKY_RST_CTL_WIDTH 1
+#define	FRF_AB_PCIE_CORE_RST_CTL_LBN 57
+#define	FRF_AB_PCIE_CORE_RST_CTL_WIDTH 1
+#define	FRF_AB_XGRX_RST_CTL_LBN 56
+#define	FRF_AB_XGRX_RST_CTL_WIDTH 1
+#define	FRF_AB_XGTX_RST_CTL_LBN 55
+#define	FRF_AB_XGTX_RST_CTL_WIDTH 1
+#define	FRF_AB_EM_RST_CTL_LBN 54
+#define	FRF_AB_EM_RST_CTL_WIDTH 1
+#define	FRF_AB_EV_RST_CTL_LBN 53
+#define	FRF_AB_EV_RST_CTL_WIDTH 1
+#define	FRF_AB_SR_RST_CTL_LBN 52
+#define	FRF_AB_SR_RST_CTL_WIDTH 1
+#define	FRF_AB_RX_RST_CTL_LBN 51
+#define	FRF_AB_RX_RST_CTL_WIDTH 1
+#define	FRF_AB_TX_RST_CTL_LBN 50
+#define	FRF_AB_TX_RST_CTL_WIDTH 1
+#define	FRF_AB_EE_RST_CTL_LBN 49
+#define	FRF_AB_EE_RST_CTL_WIDTH 1
+#define	FRF_AB_CS_RST_CTL_LBN 48
+#define	FRF_AB_CS_RST_CTL_WIDTH 1
+#define	FRF_AB_HOT_RST_CTL_LBN 40
+#define	FRF_AB_HOT_RST_CTL_WIDTH 2
+#define	FRF_AB_RST_EXT_PHY_LBN 31
+#define	FRF_AB_RST_EXT_PHY_WIDTH 1
+#define	FRF_AB_RST_XAUI_SD_LBN 30
+#define	FRF_AB_RST_XAUI_SD_WIDTH 1
+#define	FRF_AB_RST_PCIE_SD_LBN 29
+#define	FRF_AB_RST_PCIE_SD_WIDTH 1
+#define	FRF_AA_RST_PCIX_LBN 28
+#define	FRF_AA_RST_PCIX_WIDTH 1
+#define	FRF_BB_RST_BIU_LBN 28
+#define	FRF_BB_RST_BIU_WIDTH 1
+#define	FRF_AB_RST_PCIE_STKY_LBN 27
+#define	FRF_AB_RST_PCIE_STKY_WIDTH 1
+#define	FRF_AB_RST_PCIE_NSTKY_LBN 26
+#define	FRF_AB_RST_PCIE_NSTKY_WIDTH 1
+#define	FRF_AB_RST_PCIE_CORE_LBN 25
+#define	FRF_AB_RST_PCIE_CORE_WIDTH 1
+#define	FRF_AB_RST_XGRX_LBN 24
+#define	FRF_AB_RST_XGRX_WIDTH 1
+#define	FRF_AB_RST_XGTX_LBN 23
+#define	FRF_AB_RST_XGTX_WIDTH 1
+#define	FRF_AB_RST_EM_LBN 22
+#define	FRF_AB_RST_EM_WIDTH 1
+#define	FRF_AB_RST_EV_LBN 21
+#define	FRF_AB_RST_EV_WIDTH 1
+#define	FRF_AB_RST_SR_LBN 20
+#define	FRF_AB_RST_SR_WIDTH 1
+#define	FRF_AB_RST_RX_LBN 19
+#define	FRF_AB_RST_RX_WIDTH 1
+#define	FRF_AB_RST_TX_LBN 18
+#define	FRF_AB_RST_TX_WIDTH 1
+#define	FRF_AB_RST_SF_LBN 17
+#define	FRF_AB_RST_SF_WIDTH 1
+#define	FRF_AB_RST_CS_LBN 16
+#define	FRF_AB_RST_CS_WIDTH 1
+#define	FRF_AB_INT_RST_DUR_LBN 4
+#define	FRF_AB_INT_RST_DUR_WIDTH 3
+#define	FRF_AB_EXT_PHY_RST_DUR_LBN 1
+#define	FRF_AB_EXT_PHY_RST_DUR_WIDTH 3
+#define	FFE_AB_EXT_PHY_RST_DUR_10240US 7
+#define	FFE_AB_EXT_PHY_RST_DUR_5120US 6
+#define	FFE_AB_EXT_PHY_RST_DUR_2560US 5
+#define	FFE_AB_EXT_PHY_RST_DUR_1280US 4
+#define	FFE_AB_EXT_PHY_RST_DUR_640US 3
+#define	FFE_AB_EXT_PHY_RST_DUR_320US 2
+#define	FFE_AB_EXT_PHY_RST_DUR_160US 1
+#define	FFE_AB_EXT_PHY_RST_DUR_80US 0
+#define	FRF_AB_SWRST_LBN 0
+#define	FRF_AB_SWRST_WIDTH 1
+
+/* FATAL_INTR_REG_KER: Fatal interrupt register for Kernel */
+#define	FR_AZ_FATAL_INTR_KER 0x00000230
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_EN_LBN 44
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_EN_WIDTH 1
+#define	FRF_AB_PCI_BUSERR_INT_KER_EN_LBN 43
+#define	FRF_AB_PCI_BUSERR_INT_KER_EN_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_KER_EN_LBN 43
+#define	FRF_CZ_MBU_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_SRAM_OOB_INT_KER_EN_LBN 42
+#define	FRF_AZ_SRAM_OOB_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_BUFID_OOB_INT_KER_EN_LBN 41
+#define	FRF_AZ_BUFID_OOB_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_MEM_PERR_INT_KER_EN_LBN 40
+#define	FRF_AZ_MEM_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_RBUF_OWN_INT_KER_EN_LBN 39
+#define	FRF_AZ_RBUF_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_TBUF_OWN_INT_KER_EN_LBN 38
+#define	FRF_AZ_TBUF_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_EN_LBN 37
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_EN_LBN 36
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_EVQ_OWN_INT_KER_EN_LBN 35
+#define	FRF_AZ_EVQ_OWN_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_EVF_OFLO_INT_KER_EN_LBN 34
+#define	FRF_AZ_EVF_OFLO_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_ILL_ADR_INT_KER_EN_LBN 33
+#define	FRF_AZ_ILL_ADR_INT_KER_EN_WIDTH 1
+#define	FRF_AZ_SRM_PERR_INT_KER_EN_LBN 32
+#define	FRF_AZ_SRM_PERR_INT_KER_EN_WIDTH 1
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_LBN 12
+#define	FRF_CZ_SRAM_PERR_INT_P_KER_WIDTH 1
+#define	FRF_AB_PCI_BUSERR_INT_KER_LBN 11
+#define	FRF_AB_PCI_BUSERR_INT_KER_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_KER_LBN 11
+#define	FRF_CZ_MBU_PERR_INT_KER_WIDTH 1
+#define	FRF_AZ_SRAM_OOB_INT_KER_LBN 10
+#define	FRF_AZ_SRAM_OOB_INT_KER_WIDTH 1
+#define	FRF_AZ_BUFID_DC_OOB_INT_KER_LBN 9
+#define	FRF_AZ_BUFID_DC_OOB_INT_KER_WIDTH 1
+#define	FRF_AZ_MEM_PERR_INT_KER_LBN 8
+#define	FRF_AZ_MEM_PERR_INT_KER_WIDTH 1
+#define	FRF_AZ_RBUF_OWN_INT_KER_LBN 7
+#define	FRF_AZ_RBUF_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_TBUF_OWN_INT_KER_LBN 6
+#define	FRF_AZ_TBUF_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_LBN 5
+#define	FRF_AZ_RDESCQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_LBN 4
+#define	FRF_AZ_TDESCQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_EVQ_OWN_INT_KER_LBN 3
+#define	FRF_AZ_EVQ_OWN_INT_KER_WIDTH 1
+#define	FRF_AZ_EVF_OFLO_INT_KER_LBN 2
+#define	FRF_AZ_EVF_OFLO_INT_KER_WIDTH 1
+#define	FRF_AZ_ILL_ADR_INT_KER_LBN 1
+#define	FRF_AZ_ILL_ADR_INT_KER_WIDTH 1
+#define	FRF_AZ_SRM_PERR_INT_KER_LBN 0
+#define	FRF_AZ_SRM_PERR_INT_KER_WIDTH 1
+
+/* FATAL_INTR_REG_CHAR: Fatal interrupt register for Char */
+#define	FR_BZ_FATAL_INTR_CHAR 0x00000240
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_EN_LBN 44
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_EN_WIDTH 1
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_EN_LBN 43
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_CHAR_EN_LBN 43
+#define	FRF_CZ_MBU_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_EN_LBN 42
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_BUFID_OOB_INT_CHAR_EN_LBN 41
+#define	FRF_BZ_BUFID_OOB_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_MEM_PERR_INT_CHAR_EN_LBN 40
+#define	FRF_BZ_MEM_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_EN_LBN 39
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_EN_LBN 38
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_EN_LBN 37
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_EN_LBN 36
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_EN_LBN 35
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_EN_LBN 34
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_EN_LBN 33
+#define	FRF_BZ_ILL_ADR_INT_CHAR_EN_WIDTH 1
+#define	FRF_BZ_SRM_PERR_INT_CHAR_EN_LBN 32
+#define	FRF_BZ_SRM_PERR_INT_CHAR_EN_WIDTH 1
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_LBN 12
+#define	FRF_CZ_SRAM_PERR_INT_P_CHAR_WIDTH 1
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_LBN 11
+#define	FRF_BB_PCI_BUSERR_INT_CHAR_WIDTH 1
+#define	FRF_CZ_MBU_PERR_INT_CHAR_LBN 11
+#define	FRF_CZ_MBU_PERR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_LBN 10
+#define	FRF_BZ_SRAM_OOB_INT_CHAR_WIDTH 1
+#define	FRF_BZ_BUFID_DC_OOB_INT_CHAR_LBN 9
+#define	FRF_BZ_BUFID_DC_OOB_INT_CHAR_WIDTH 1
+#define	FRF_BZ_MEM_PERR_INT_CHAR_LBN 8
+#define	FRF_BZ_MEM_PERR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_LBN 7
+#define	FRF_BZ_RBUF_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_LBN 6
+#define	FRF_BZ_TBUF_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_LBN 5
+#define	FRF_BZ_RDESCQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_LBN 4
+#define	FRF_BZ_TDESCQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_LBN 3
+#define	FRF_BZ_EVQ_OWN_INT_CHAR_WIDTH 1
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_LBN 2
+#define	FRF_BZ_EVF_OFLO_INT_CHAR_WIDTH 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_LBN 1
+#define	FRF_BZ_ILL_ADR_INT_CHAR_WIDTH 1
+#define	FRF_BZ_SRM_PERR_INT_CHAR_LBN 0
+#define	FRF_BZ_SRM_PERR_INT_CHAR_WIDTH 1
+
+/* DP_CTRL_REG: Datapath control register */
+#define	FR_BZ_DP_CTRL 0x00000250
+#define	FRF_BZ_FLS_EVQ_ID_LBN 0
+#define	FRF_BZ_FLS_EVQ_ID_WIDTH 12
+
+/* MEM_STAT_REG: Memory status register */
+#define	FR_AZ_MEM_STAT 0x00000260
+#define	FRF_AB_MEM_PERR_VEC_LBN 53
+#define	FRF_AB_MEM_PERR_VEC_WIDTH 38
+#define	FRF_AB_MBIST_CORR_LBN 38
+#define	FRF_AB_MBIST_CORR_WIDTH 15
+#define	FRF_AB_MBIST_ERR_LBN 0
+#define	FRF_AB_MBIST_ERR_WIDTH 40
+#define	FRF_CZ_MEM_PERR_VEC_LBN 0
+#define	FRF_CZ_MEM_PERR_VEC_WIDTH 35
+
+/* CS_DEBUG_REG: Debug register */
+#define	FR_AZ_CS_DEBUG 0x00000270
+#define	FRF_AB_GLB_DEBUG2_SEL_LBN 50
+#define	FRF_AB_GLB_DEBUG2_SEL_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL2_LBN 47
+#define	FRF_AB_DEBUG_BLK_SEL2_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL1_LBN 44
+#define	FRF_AB_DEBUG_BLK_SEL1_WIDTH 3
+#define	FRF_AB_DEBUG_BLK_SEL0_LBN 41
+#define	FRF_AB_DEBUG_BLK_SEL0_WIDTH 3
+#define	FRF_CZ_CS_PORT_NUM_LBN 40
+#define	FRF_CZ_CS_PORT_NUM_WIDTH 2
+#define	FRF_AB_MISC_DEBUG_ADDR_LBN 36
+#define	FRF_AB_MISC_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_SERDES_DEBUG_ADDR_LBN 31
+#define	FRF_AB_SERDES_DEBUG_ADDR_WIDTH 5
+#define	FRF_CZ_CS_PORT_FPE_LBN 1
+#define	FRF_CZ_CS_PORT_FPE_WIDTH 35
+#define	FRF_AB_EM_DEBUG_ADDR_LBN 26
+#define	FRF_AB_EM_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_SR_DEBUG_ADDR_LBN 21
+#define	FRF_AB_SR_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_EV_DEBUG_ADDR_LBN 16
+#define	FRF_AB_EV_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_RX_DEBUG_ADDR_LBN 11
+#define	FRF_AB_RX_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_TX_DEBUG_ADDR_LBN 6
+#define	FRF_AB_TX_DEBUG_ADDR_WIDTH 5
+#define	FRF_AB_CS_BIU_DEBUG_ADDR_LBN 1
+#define	FRF_AB_CS_BIU_DEBUG_ADDR_WIDTH 5
+#define	FRF_AZ_CS_DEBUG_EN_LBN 0
+#define	FRF_AZ_CS_DEBUG_EN_WIDTH 1
+
+/* DRIVER_REG: Driver scratch register [0-7] */
+#define	FR_AZ_DRIVER 0x00000280
+#define	FR_AZ_DRIVER_STEP 16
+#define	FR_AZ_DRIVER_ROWS 8
+#define	FRF_AZ_DRIVER_DW0_LBN 0
+#define	FRF_AZ_DRIVER_DW0_WIDTH 32
+
+/* ALTERA_BUILD_REG: Altera build register */
+#define	FR_AZ_ALTERA_BUILD 0x00000300
+#define	FRF_AZ_ALTERA_BUILD_VER_LBN 0
+#define	FRF_AZ_ALTERA_BUILD_VER_WIDTH 32
+
+/* CSR_SPARE_REG: Spare register */
+#define	FR_AZ_CSR_SPARE 0x00000310
+#define	FRF_AB_MEM_PERR_EN_LBN 64
+#define	FRF_AB_MEM_PERR_EN_WIDTH 38
+#define	FRF_CZ_MEM_PERR_EN_LBN 64
+#define	FRF_CZ_MEM_PERR_EN_WIDTH 35
+#define	FRF_AB_MEM_PERR_EN_TX_DATA_LBN 72
+#define	FRF_AB_MEM_PERR_EN_TX_DATA_WIDTH 2
+#define	FRF_AZ_CSR_SPARE_BITS_LBN 0
+#define	FRF_AZ_CSR_SPARE_BITS_WIDTH 32
+
+/* PCIE_SD_CTL0123_REG: PCIE SerDes control register 0 to 3 */
+#define	FR_AB_PCIE_SD_CTL0123 0x00000320
+#define	FRF_AB_PCIE_TESTSIG_H_LBN 96
+#define	FRF_AB_PCIE_TESTSIG_H_WIDTH 19
+#define	FRF_AB_PCIE_TESTSIG_L_LBN 64
+#define	FRF_AB_PCIE_TESTSIG_L_WIDTH 19
+#define	FRF_AB_PCIE_OFFSET_LBN 56
+#define	FRF_AB_PCIE_OFFSET_WIDTH 8
+#define	FRF_AB_PCIE_OFFSETEN_H_LBN 55
+#define	FRF_AB_PCIE_OFFSETEN_H_WIDTH 1
+#define	FRF_AB_PCIE_OFFSETEN_L_LBN 54
+#define	FRF_AB_PCIE_OFFSETEN_L_WIDTH 1
+#define	FRF_AB_PCIE_HIVMODE_H_LBN 53
+#define	FRF_AB_PCIE_HIVMODE_H_WIDTH 1
+#define	FRF_AB_PCIE_HIVMODE_L_LBN 52
+#define	FRF_AB_PCIE_HIVMODE_L_WIDTH 1
+#define	FRF_AB_PCIE_PARRESET_H_LBN 51
+#define	FRF_AB_PCIE_PARRESET_H_WIDTH 1
+#define	FRF_AB_PCIE_PARRESET_L_LBN 50
+#define	FRF_AB_PCIE_PARRESET_L_WIDTH 1
+#define	FRF_AB_PCIE_LPBKWDRV_H_LBN 49
+#define	FRF_AB_PCIE_LPBKWDRV_H_WIDTH 1
+#define	FRF_AB_PCIE_LPBKWDRV_L_LBN 48
+#define	FRF_AB_PCIE_LPBKWDRV_L_WIDTH 1
+#define	FRF_AB_PCIE_LPBK_LBN 40
+#define	FRF_AB_PCIE_LPBK_WIDTH 8
+#define	FRF_AB_PCIE_PARLPBK_LBN 32
+#define	FRF_AB_PCIE_PARLPBK_WIDTH 8
+#define	FRF_AB_PCIE_RXTERMADJ_H_LBN 30
+#define	FRF_AB_PCIE_RXTERMADJ_H_WIDTH 2
+#define	FRF_AB_PCIE_RXTERMADJ_L_LBN 28
+#define	FRF_AB_PCIE_RXTERMADJ_L_WIDTH 2
+#define	FFE_AB_PCIE_RXTERMADJ_MIN15PCNT 3
+#define	FFE_AB_PCIE_RXTERMADJ_PL10PCNT 2
+#define	FFE_AB_PCIE_RXTERMADJ_MIN17PCNT 1
+#define	FFE_AB_PCIE_RXTERMADJ_NOMNL 0
+#define	FRF_AB_PCIE_TXTERMADJ_H_LBN 26
+#define	FRF_AB_PCIE_TXTERMADJ_H_WIDTH 2
+#define	FRF_AB_PCIE_TXTERMADJ_L_LBN 24
+#define	FRF_AB_PCIE_TXTERMADJ_L_WIDTH 2
+#define	FFE_AB_PCIE_TXTERMADJ_MIN15PCNT 3
+#define	FFE_AB_PCIE_TXTERMADJ_PL10PCNT 2
+#define	FFE_AB_PCIE_TXTERMADJ_MIN17PCNT 1
+#define	FFE_AB_PCIE_TXTERMADJ_NOMNL 0
+#define	FRF_AB_PCIE_RXEQCTL_H_LBN 18
+#define	FRF_AB_PCIE_RXEQCTL_H_WIDTH 2
+#define	FRF_AB_PCIE_RXEQCTL_L_LBN 16
+#define	FRF_AB_PCIE_RXEQCTL_L_WIDTH 2
+#define	FFE_AB_PCIE_RXEQCTL_OFF_ALT 3
+#define	FFE_AB_PCIE_RXEQCTL_OFF 2
+#define	FFE_AB_PCIE_RXEQCTL_MIN 1
+#define	FFE_AB_PCIE_RXEQCTL_MAX 0
+#define	FRF_AB_PCIE_HIDRV_LBN 8
+#define	FRF_AB_PCIE_HIDRV_WIDTH 8
+#define	FRF_AB_PCIE_LODRV_LBN 0
+#define	FRF_AB_PCIE_LODRV_WIDTH 8
+
+/* PCIE_SD_CTL45_REG: PCIE SerDes control register 4 and 5 */
+#define	FR_AB_PCIE_SD_CTL45 0x00000330
+#define	FRF_AB_PCIE_DTX7_LBN 60
+#define	FRF_AB_PCIE_DTX7_WIDTH 4
+#define	FRF_AB_PCIE_DTX6_LBN 56
+#define	FRF_AB_PCIE_DTX6_WIDTH 4
+#define	FRF_AB_PCIE_DTX5_LBN 52
+#define	FRF_AB_PCIE_DTX5_WIDTH 4
+#define	FRF_AB_PCIE_DTX4_LBN 48
+#define	FRF_AB_PCIE_DTX4_WIDTH 4
+#define	FRF_AB_PCIE_DTX3_LBN 44
+#define	FRF_AB_PCIE_DTX3_WIDTH 4
+#define	FRF_AB_PCIE_DTX2_LBN 40
+#define	FRF_AB_PCIE_DTX2_WIDTH 4
+#define	FRF_AB_PCIE_DTX1_LBN 36
+#define	FRF_AB_PCIE_DTX1_WIDTH 4
+#define	FRF_AB_PCIE_DTX0_LBN 32
+#define	FRF_AB_PCIE_DTX0_WIDTH 4
+#define	FRF_AB_PCIE_DEQ7_LBN 28
+#define	FRF_AB_PCIE_DEQ7_WIDTH 4
+#define	FRF_AB_PCIE_DEQ6_LBN 24
+#define	FRF_AB_PCIE_DEQ6_WIDTH 4
+#define	FRF_AB_PCIE_DEQ5_LBN 20
+#define	FRF_AB_PCIE_DEQ5_WIDTH 4
+#define	FRF_AB_PCIE_DEQ4_LBN 16
+#define	FRF_AB_PCIE_DEQ4_WIDTH 4
+#define	FRF_AB_PCIE_DEQ3_LBN 12
+#define	FRF_AB_PCIE_DEQ3_WIDTH 4
+#define	FRF_AB_PCIE_DEQ2_LBN 8
+#define	FRF_AB_PCIE_DEQ2_WIDTH 4
+#define	FRF_AB_PCIE_DEQ1_LBN 4
+#define	FRF_AB_PCIE_DEQ1_WIDTH 4
+#define	FRF_AB_PCIE_DEQ0_LBN 0
+#define	FRF_AB_PCIE_DEQ0_WIDTH 4
+
+/* PCIE_PCS_CTL_STAT_REG: PCIE PCS control and status register */
+#define	FR_AB_PCIE_PCS_CTL_STAT 0x00000340
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_H_LBN 52
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_H_WIDTH 4
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_L_LBN 48
+#define	FRF_AB_PCIE_PRBSERRCOUNT0_L_WIDTH 4
+#define	FRF_AB_PCIE_PRBSERR_LBN 40
+#define	FRF_AB_PCIE_PRBSERR_WIDTH 8
+#define	FRF_AB_PCIE_PRBSERRH0_LBN 32
+#define	FRF_AB_PCIE_PRBSERRH0_WIDTH 8
+#define	FRF_AB_PCIE_FASTINIT_H_LBN 15
+#define	FRF_AB_PCIE_FASTINIT_H_WIDTH 1
+#define	FRF_AB_PCIE_FASTINIT_L_LBN 14
+#define	FRF_AB_PCIE_FASTINIT_L_WIDTH 1
+#define	FRF_AB_PCIE_CTCDISABLE_H_LBN 13
+#define	FRF_AB_PCIE_CTCDISABLE_H_WIDTH 1
+#define	FRF_AB_PCIE_CTCDISABLE_L_LBN 12
+#define	FRF_AB_PCIE_CTCDISABLE_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSYNC_H_LBN 11
+#define	FRF_AB_PCIE_PRBSSYNC_H_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSYNC_L_LBN 10
+#define	FRF_AB_PCIE_PRBSSYNC_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSERRACK_H_LBN 9
+#define	FRF_AB_PCIE_PRBSERRACK_H_WIDTH 1
+#define	FRF_AB_PCIE_PRBSERRACK_L_LBN 8
+#define	FRF_AB_PCIE_PRBSERRACK_L_WIDTH 1
+#define	FRF_AB_PCIE_PRBSSEL_LBN 0
+#define	FRF_AB_PCIE_PRBSSEL_WIDTH 8
+
+/* DEBUG_DATA_OUT_REG: Live Debug and Debug 2 out ports */
+#define	FR_BB_DEBUG_DATA_OUT 0x00000350
+#define	FRF_BB_DEBUG2_PORT_LBN 25
+#define	FRF_BB_DEBUG2_PORT_WIDTH 15
+#define	FRF_BB_DEBUG1_PORT_LBN 0
+#define	FRF_BB_DEBUG1_PORT_WIDTH 25
+
+/* EVQ_RPTR_REGP0: Event queue read pointer register */
+#define	FR_BZ_EVQ_RPTR_P0 0x00000400
+#define	FR_BZ_EVQ_RPTR_P0_STEP 8192
+#define	FR_BZ_EVQ_RPTR_P0_ROWS 1024
+/* EVQ_RPTR_REG_KER: Event queue read pointer register */
+#define	FR_AA_EVQ_RPTR_KER 0x00011b00
+#define	FR_AA_EVQ_RPTR_KER_STEP 4
+#define	FR_AA_EVQ_RPTR_KER_ROWS 4
+/* EVQ_RPTR_REG: Event queue read pointer register */
+#define	FR_BZ_EVQ_RPTR 0x00fa0000
+#define	FR_BZ_EVQ_RPTR_STEP 16
+#define	FR_BB_EVQ_RPTR_ROWS 4096
+#define	FR_CZ_EVQ_RPTR_ROWS 1024
+/* EVQ_RPTR_REGP123: Event queue read pointer register */
+#define	FR_BB_EVQ_RPTR_P123 0x01000400
+#define	FR_BB_EVQ_RPTR_P123_STEP 8192
+#define	FR_BB_EVQ_RPTR_P123_ROWS 3072
+#define	FRF_AZ_EVQ_RPTR_VLD_LBN 15
+#define	FRF_AZ_EVQ_RPTR_VLD_WIDTH 1
+#define	FRF_AZ_EVQ_RPTR_LBN 0
+#define	FRF_AZ_EVQ_RPTR_WIDTH 15
+
+/* TIMER_COMMAND_REGP0: Timer Command Registers */
+#define	FR_BZ_TIMER_COMMAND_P0 0x00000420
+#define	FR_BZ_TIMER_COMMAND_P0_STEP 8192
+#define	FR_BZ_TIMER_COMMAND_P0_ROWS 1024
+/* TIMER_COMMAND_REG_KER: Timer Command Registers */
+#define	FR_AA_TIMER_COMMAND_KER 0x00000420
+#define	FR_AA_TIMER_COMMAND_KER_STEP 8192
+#define	FR_AA_TIMER_COMMAND_KER_ROWS 4
+/* TIMER_COMMAND_REGP123: Timer Command Registers */
+#define	FR_BB_TIMER_COMMAND_P123 0x01000420
+#define	FR_BB_TIMER_COMMAND_P123_STEP 8192
+#define	FR_BB_TIMER_COMMAND_P123_ROWS 3072
+#define	FRF_CZ_TC_TIMER_MODE_LBN 14
+#define	FRF_CZ_TC_TIMER_MODE_WIDTH 2
+#define	FRF_AB_TC_TIMER_MODE_LBN 12
+#define	FRF_AB_TC_TIMER_MODE_WIDTH 2
+#define	FRF_CZ_TC_TIMER_VAL_LBN 0
+#define	FRF_CZ_TC_TIMER_VAL_WIDTH 14
+#define	FRF_AB_TC_TIMER_VAL_LBN 0
+#define	FRF_AB_TC_TIMER_VAL_WIDTH 12
+
+/* DRV_EV_REG: Driver generated event register */
+#define	FR_AZ_DRV_EV 0x00000440
+#define	FRF_AZ_DRV_EV_QID_LBN 64
+#define	FRF_AZ_DRV_EV_QID_WIDTH 12
+#define	FRF_AZ_DRV_EV_DATA_LBN 0
+#define	FRF_AZ_DRV_EV_DATA_WIDTH 64
+
+/* EVQ_CTL_REG: Event queue control register */
+#define	FR_AZ_EVQ_CTL 0x00000450
+#define	FRF_CZ_RX_EVQ_WAKEUP_MASK_LBN 15
+#define	FRF_CZ_RX_EVQ_WAKEUP_MASK_WIDTH 10
+#define	FRF_BB_RX_EVQ_WAKEUP_MASK_LBN 15
+#define	FRF_BB_RX_EVQ_WAKEUP_MASK_WIDTH 6
+#define	FRF_AZ_EVQ_OWNERR_CTL_LBN 14
+#define	FRF_AZ_EVQ_OWNERR_CTL_WIDTH 1
+#define	FRF_AZ_EVQ_FIFO_AF_TH_LBN 7
+#define	FRF_AZ_EVQ_FIFO_AF_TH_WIDTH 7
+#define	FRF_AZ_EVQ_FIFO_NOTAF_TH_LBN 0
+#define	FRF_AZ_EVQ_FIFO_NOTAF_TH_WIDTH 7
+
+/* EVQ_CNT1_REG: Event counter 1 register */
+#define	FR_AZ_EVQ_CNT1 0x00000460
+#define	FRF_AZ_EVQ_CNT_PRE_FIFO_LBN 120
+#define	FRF_AZ_EVQ_CNT_PRE_FIFO_WIDTH 7
+#define	FRF_AZ_EVQ_CNT_TOBIU_LBN 100
+#define	FRF_AZ_EVQ_CNT_TOBIU_WIDTH 20
+#define	FRF_AZ_EVQ_TX_REQ_CNT_LBN 80
+#define	FRF_AZ_EVQ_TX_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_RX_REQ_CNT_LBN 60
+#define	FRF_AZ_EVQ_RX_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_EM_REQ_CNT_LBN 40
+#define	FRF_AZ_EVQ_EM_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_CSR_REQ_CNT_LBN 20
+#define	FRF_AZ_EVQ_CSR_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_ERR_REQ_CNT_LBN 0
+#define	FRF_AZ_EVQ_ERR_REQ_CNT_WIDTH 20
+
+/* EVQ_CNT2_REG: Event counter 2 register */
+#define	FR_AZ_EVQ_CNT2 0x00000470
+#define	FRF_AZ_EVQ_UPD_REQ_CNT_LBN 104
+#define	FRF_AZ_EVQ_UPD_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_CLR_REQ_CNT_LBN 84
+#define	FRF_AZ_EVQ_CLR_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_RDY_CNT_LBN 80
+#define	FRF_AZ_EVQ_RDY_CNT_WIDTH 4
+#define	FRF_AZ_EVQ_WU_REQ_CNT_LBN 60
+#define	FRF_AZ_EVQ_WU_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_WET_REQ_CNT_LBN 40
+#define	FRF_AZ_EVQ_WET_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_INIT_REQ_CNT_LBN 20
+#define	FRF_AZ_EVQ_INIT_REQ_CNT_WIDTH 20
+#define	FRF_AZ_EVQ_TM_REQ_CNT_LBN 0
+#define	FRF_AZ_EVQ_TM_REQ_CNT_WIDTH 20
+
+/* USR_EV_REG: Event mailbox register */
+#define	FR_CZ_USR_EV 0x00000540
+#define	FR_CZ_USR_EV_STEP 8192
+#define	FR_CZ_USR_EV_ROWS 1024
+#define	FRF_CZ_USR_EV_DATA_LBN 0
+#define	FRF_CZ_USR_EV_DATA_WIDTH 32
+
+/* BUF_TBL_CFG_REG: Buffer table configuration register */
+#define	FR_AZ_BUF_TBL_CFG 0x00000600
+#define	FRF_AZ_BUF_TBL_MODE_LBN 3
+#define	FRF_AZ_BUF_TBL_MODE_WIDTH 1
+
+/* SRM_RX_DC_CFG_REG: SRAM receive descriptor cache configuration register */
+#define	FR_AZ_SRM_RX_DC_CFG 0x00000610
+#define	FRF_AZ_SRM_CLK_TMP_EN_LBN 21
+#define	FRF_AZ_SRM_CLK_TMP_EN_WIDTH 1
+#define	FRF_AZ_SRM_RX_DC_BASE_ADR_LBN 0
+#define	FRF_AZ_SRM_RX_DC_BASE_ADR_WIDTH 21
+
+/* SRM_TX_DC_CFG_REG: SRAM transmit descriptor cache configuration register */
+#define	FR_AZ_SRM_TX_DC_CFG 0x00000620
+#define	FRF_AZ_SRM_TX_DC_BASE_ADR_LBN 0
+#define	FRF_AZ_SRM_TX_DC_BASE_ADR_WIDTH 21
+
+/* SRM_CFG_REG: SRAM configuration register */
+#define	FR_AZ_SRM_CFG 0x00000630
+#define	FRF_AZ_SRM_OOB_ADR_INTEN_LBN 5
+#define	FRF_AZ_SRM_OOB_ADR_INTEN_WIDTH 1
+#define	FRF_AZ_SRM_OOB_BUF_INTEN_LBN 4
+#define	FRF_AZ_SRM_OOB_BUF_INTEN_WIDTH 1
+#define	FRF_AZ_SRM_INIT_EN_LBN 3
+#define	FRF_AZ_SRM_INIT_EN_WIDTH 1
+#define	FRF_AZ_SRM_NUM_BANK_LBN 2
+#define	FRF_AZ_SRM_NUM_BANK_WIDTH 1
+#define	FRF_AZ_SRM_BANK_SIZE_LBN 0
+#define	FRF_AZ_SRM_BANK_SIZE_WIDTH 2
+
+/* BUF_TBL_UPD_REG: Buffer table update register */
+#define	FR_AZ_BUF_TBL_UPD 0x00000650
+#define	FRF_AZ_BUF_UPD_CMD_LBN 63
+#define	FRF_AZ_BUF_UPD_CMD_WIDTH 1
+#define	FRF_AZ_BUF_CLR_CMD_LBN 62
+#define	FRF_AZ_BUF_CLR_CMD_WIDTH 1
+#define	FRF_AZ_BUF_CLR_END_ID_LBN 32
+#define	FRF_AZ_BUF_CLR_END_ID_WIDTH 20
+#define	FRF_AZ_BUF_CLR_START_ID_LBN 0
+#define	FRF_AZ_BUF_CLR_START_ID_WIDTH 20
+
+/* SRM_UPD_EVQ_REG: Buffer table update register */
+#define	FR_AZ_SRM_UPD_EVQ 0x00000660
+#define	FRF_AZ_SRM_UPD_EVQ_ID_LBN 0
+#define	FRF_AZ_SRM_UPD_EVQ_ID_WIDTH 12
+
+/* SRAM_PARITY_REG: SRAM parity register. */
+#define	FR_AZ_SRAM_PARITY 0x00000670
+#define	FRF_CZ_BYPASS_ECC_LBN 3
+#define	FRF_CZ_BYPASS_ECC_WIDTH 1
+#define	FRF_CZ_SEC_INT_LBN 2
+#define	FRF_CZ_SEC_INT_WIDTH 1
+#define	FRF_CZ_FORCE_SRAM_DOUBLE_ERR_LBN 1
+#define	FRF_CZ_FORCE_SRAM_DOUBLE_ERR_WIDTH 1
+#define	FRF_AB_FORCE_SRAM_PERR_LBN 0
+#define	FRF_AB_FORCE_SRAM_PERR_WIDTH 1
+#define	FRF_CZ_FORCE_SRAM_SINGLE_ERR_LBN 0
+#define	FRF_CZ_FORCE_SRAM_SINGLE_ERR_WIDTH 1
+
+/* RX_CFG_REG: Receive configuration register */
+#define	FR_AZ_RX_CFG 0x00000800
+#define	FRF_CZ_RX_MIN_KBUF_SIZE_LBN 72
+#define	FRF_CZ_RX_MIN_KBUF_SIZE_WIDTH 14
+#define	FRF_CZ_RX_HDR_SPLIT_EN_LBN 71
+#define	FRF_CZ_RX_HDR_SPLIT_EN_WIDTH 1
+#define	FRF_CZ_RX_HDR_SPLIT_PLD_BUF_SIZE_LBN 62
+#define	FRF_CZ_RX_HDR_SPLIT_PLD_BUF_SIZE_WIDTH 9
+#define	FRF_CZ_RX_HDR_SPLIT_HDR_BUF_SIZE_LBN 53
+#define	FRF_CZ_RX_HDR_SPLIT_HDR_BUF_SIZE_WIDTH 9
+#define	FRF_CZ_RX_PRE_RFF_IPG_LBN 49
+#define	FRF_CZ_RX_PRE_RFF_IPG_WIDTH 4
+#define	FRF_BZ_RX_TCP_SUP_LBN 48
+#define	FRF_BZ_RX_TCP_SUP_WIDTH 1
+#define	FRF_BZ_RX_INGR_EN_LBN 47
+#define	FRF_BZ_RX_INGR_EN_WIDTH 1
+#define	FRF_BZ_RX_IP_HASH_LBN 46
+#define	FRF_BZ_RX_IP_HASH_WIDTH 1
+#define	FRF_BZ_RX_HASH_ALG_LBN 45
+#define	FRF_BZ_RX_HASH_ALG_WIDTH 1
+#define	FRF_BZ_RX_HASH_INSRT_HDR_LBN 44
+#define	FRF_BZ_RX_HASH_INSRT_HDR_WIDTH 1
+#define	FRF_BZ_RX_DESC_PUSH_EN_LBN 43
+#define	FRF_BZ_RX_DESC_PUSH_EN_WIDTH 1
+#define	FRF_BZ_RX_RDW_PATCH_EN_LBN 42
+#define	FRF_BZ_RX_RDW_PATCH_EN_WIDTH 1
+#define	FRF_BB_RX_PCI_BURST_SIZE_LBN 39
+#define	FRF_BB_RX_PCI_BURST_SIZE_WIDTH 3
+#define	FRF_BZ_RX_OWNERR_CTL_LBN 38
+#define	FRF_BZ_RX_OWNERR_CTL_WIDTH 1
+#define	FRF_BZ_RX_XON_TX_TH_LBN 33
+#define	FRF_BZ_RX_XON_TX_TH_WIDTH 5
+#define	FRF_AA_RX_DESC_PUSH_EN_LBN 35
+#define	FRF_AA_RX_DESC_PUSH_EN_WIDTH 1
+#define	FRF_AA_RX_RDW_PATCH_EN_LBN 34
+#define	FRF_AA_RX_RDW_PATCH_EN_WIDTH 1
+#define	FRF_AA_RX_PCI_BURST_SIZE_LBN 31
+#define	FRF_AA_RX_PCI_BURST_SIZE_WIDTH 3
+#define	FRF_BZ_RX_XOFF_TX_TH_LBN 28
+#define	FRF_BZ_RX_XOFF_TX_TH_WIDTH 5
+#define	FRF_AA_RX_OWNERR_CTL_LBN 30
+#define	FRF_AA_RX_OWNERR_CTL_WIDTH 1
+#define	FRF_AA_RX_XON_TX_TH_LBN 25
+#define	FRF_AA_RX_XON_TX_TH_WIDTH 5
+#define	FRF_BZ_RX_USR_BUF_SIZE_LBN 19
+#define	FRF_BZ_RX_USR_BUF_SIZE_WIDTH 9
+#define	FRF_AA_RX_XOFF_TX_TH_LBN 20
+#define	FRF_AA_RX_XOFF_TX_TH_WIDTH 5
+#define	FRF_AA_RX_USR_BUF_SIZE_LBN 11
+#define	FRF_AA_RX_USR_BUF_SIZE_WIDTH 9
+#define	FRF_BZ_RX_XON_MAC_TH_LBN 10
+#define	FRF_BZ_RX_XON_MAC_TH_WIDTH 9
+#define	FRF_AA_RX_XON_MAC_TH_LBN 6
+#define	FRF_AA_RX_XON_MAC_TH_WIDTH 5
+#define	FRF_BZ_RX_XOFF_MAC_TH_LBN 1
+#define	FRF_BZ_RX_XOFF_MAC_TH_WIDTH 9
+#define	FRF_AA_RX_XOFF_MAC_TH_LBN 1
+#define	FRF_AA_RX_XOFF_MAC_TH_WIDTH 5
+#define	FRF_AZ_RX_XOFF_MAC_EN_LBN 0
+#define	FRF_AZ_RX_XOFF_MAC_EN_WIDTH 1
+
+/* RX_FILTER_CTL_REG: Receive filter control registers */
+#define	FR_BZ_RX_FILTER_CTL 0x00000810
+#define	FRF_CZ_ETHERNET_WILDCARD_SEARCH_LIMIT_LBN 94
+#define	FRF_CZ_ETHERNET_WILDCARD_SEARCH_LIMIT_WIDTH 8
+#define	FRF_CZ_ETHERNET_FULL_SEARCH_LIMIT_LBN 86
+#define	FRF_CZ_ETHERNET_FULL_SEARCH_LIMIT_WIDTH 8
+#define	FRF_CZ_RX_FILTER_ALL_VLAN_ETHERTYPES_LBN 85
+#define	FRF_CZ_RX_FILTER_ALL_VLAN_ETHERTYPES_WIDTH 1
+#define	FRF_CZ_RX_VLAN_MATCH_ETHERTYPE_LBN 69
+#define	FRF_CZ_RX_VLAN_MATCH_ETHERTYPE_WIDTH 16
+#define	FRF_CZ_MULTICAST_NOMATCH_Q_ID_LBN 57
+#define	FRF_CZ_MULTICAST_NOMATCH_Q_ID_WIDTH 12
+#define	FRF_CZ_MULTICAST_NOMATCH_RSS_ENABLED_LBN 56
+#define	FRF_CZ_MULTICAST_NOMATCH_RSS_ENABLED_WIDTH 1
+#define	FRF_CZ_MULTICAST_NOMATCH_IP_OVERRIDE_LBN 55
+#define	FRF_CZ_MULTICAST_NOMATCH_IP_OVERRIDE_WIDTH 1
+#define	FRF_CZ_UNICAST_NOMATCH_Q_ID_LBN 43
+#define	FRF_CZ_UNICAST_NOMATCH_Q_ID_WIDTH 12
+#define	FRF_CZ_UNICAST_NOMATCH_RSS_ENABLED_LBN 42
+#define	FRF_CZ_UNICAST_NOMATCH_RSS_ENABLED_WIDTH 1
+#define	FRF_CZ_UNICAST_NOMATCH_IP_OVERRIDE_LBN 41
+#define	FRF_CZ_UNICAST_NOMATCH_IP_OVERRIDE_WIDTH 1
+#define	FRF_BZ_SCATTER_ENBL_NO_MATCH_Q_LBN 40
+#define	FRF_BZ_SCATTER_ENBL_NO_MATCH_Q_WIDTH 1
+#define	FRF_BZ_UDP_FULL_SRCH_LIMIT_LBN 32
+#define	FRF_BZ_UDP_FULL_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_NUM_KER_LBN 24
+#define	FRF_BZ_NUM_KER_WIDTH 2
+#define	FRF_BZ_UDP_WILD_SRCH_LIMIT_LBN 16
+#define	FRF_BZ_UDP_WILD_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_TCP_WILD_SRCH_LIMIT_LBN 8
+#define	FRF_BZ_TCP_WILD_SRCH_LIMIT_WIDTH 8
+#define	FRF_BZ_TCP_FULL_SRCH_LIMIT_LBN 0
+#define	FRF_BZ_TCP_FULL_SRCH_LIMIT_WIDTH 8
+
+/* RX_FLUSH_DESCQ_REG: Receive flush descriptor queue register */
+#define	FR_AZ_RX_FLUSH_DESCQ 0x00000820
+#define	FRF_AZ_RX_FLUSH_DESCQ_CMD_LBN 24
+#define	FRF_AZ_RX_FLUSH_DESCQ_CMD_WIDTH 1
+#define	FRF_AZ_RX_FLUSH_DESCQ_LBN 0
+#define	FRF_AZ_RX_FLUSH_DESCQ_WIDTH 12
+
+/* RX_DESC_UPD_REGP0: Receive descriptor update register. */
+#define	FR_BZ_RX_DESC_UPD_P0 0x00000830
+#define	FR_BZ_RX_DESC_UPD_P0_STEP 8192
+#define	FR_BZ_RX_DESC_UPD_P0_ROWS 1024
+/* RX_DESC_UPD_REG_KER: Receive descriptor update register. */
+#define	FR_AA_RX_DESC_UPD_KER 0x00000830
+#define	FR_AA_RX_DESC_UPD_KER_STEP 8192
+#define	FR_AA_RX_DESC_UPD_KER_ROWS 4
+/* RX_DESC_UPD_REGP123: Receive descriptor update register. */
+#define	FR_BB_RX_DESC_UPD_P123 0x01000830
+#define	FR_BB_RX_DESC_UPD_P123_STEP 8192
+#define	FR_BB_RX_DESC_UPD_P123_ROWS 3072
+#define	FRF_AZ_RX_DESC_WPTR_LBN 96
+#define	FRF_AZ_RX_DESC_WPTR_WIDTH 12
+#define	FRF_AZ_RX_DESC_PUSH_CMD_LBN 95
+#define	FRF_AZ_RX_DESC_PUSH_CMD_WIDTH 1
+#define	FRF_AZ_RX_DESC_LBN 0
+#define	FRF_AZ_RX_DESC_WIDTH 64
+
+/* RX_DC_CFG_REG: Receive descriptor cache configuration register */
+#define	FR_AZ_RX_DC_CFG 0x00000840
+#define	FRF_AB_RX_MAX_PF_LBN 2
+#define	FRF_AB_RX_MAX_PF_WIDTH 2
+#define	FRF_AZ_RX_DC_SIZE_LBN 0
+#define	FRF_AZ_RX_DC_SIZE_WIDTH 2
+#define	FFE_AZ_RX_DC_SIZE_64 3
+#define	FFE_AZ_RX_DC_SIZE_32 2
+#define	FFE_AZ_RX_DC_SIZE_16 1
+#define	FFE_AZ_RX_DC_SIZE_8 0
+
+/* RX_DC_PF_WM_REG: Receive descriptor cache pre-fetch watermark register */
+#define	FR_AZ_RX_DC_PF_WM 0x00000850
+#define	FRF_AZ_RX_DC_PF_HWM_LBN 6
+#define	FRF_AZ_RX_DC_PF_HWM_WIDTH 6
+#define	FRF_AZ_RX_DC_PF_LWM_LBN 0
+#define	FRF_AZ_RX_DC_PF_LWM_WIDTH 6
+
+/* RX_RSS_TKEY_REG: RSS Toeplitz hash key */
+#define	FR_BZ_RX_RSS_TKEY 0x00000860
+#define	FRF_BZ_RX_RSS_TKEY_HI_LBN 64
+#define	FRF_BZ_RX_RSS_TKEY_HI_WIDTH 64
+#define	FRF_BZ_RX_RSS_TKEY_LO_LBN 0
+#define	FRF_BZ_RX_RSS_TKEY_LO_WIDTH 64
+
+/* RX_NODESC_DROP_REG: Receive dropped packet counter register */
+#define	FR_AZ_RX_NODESC_DROP 0x00000880
+#define	FRF_CZ_RX_NODESC_DROP_CNT_LBN 0
+#define	FRF_CZ_RX_NODESC_DROP_CNT_WIDTH 32
+#define	FRF_AB_RX_NODESC_DROP_CNT_LBN 0
+#define	FRF_AB_RX_NODESC_DROP_CNT_WIDTH 16
+
+/* RX_SELF_RST_REG: Receive self reset register */
+#define	FR_AA_RX_SELF_RST 0x00000890
+#define	FRF_AA_RX_ISCSI_DIS_LBN 17
+#define	FRF_AA_RX_ISCSI_DIS_WIDTH 1
+#define	FRF_AA_RX_SW_RST_REG_LBN 16
+#define	FRF_AA_RX_SW_RST_REG_WIDTH 1
+#define FRF_AA_RX_NODESC_WAIT_DIS_LBN 9
+#define FRF_AA_RX_NODESC_WAIT_DIS_WIDTH 1
+#define	FRF_AA_RX_SELF_RST_EN_LBN 8
+#define	FRF_AA_RX_SELF_RST_EN_WIDTH 1
+#define	FRF_AA_RX_MAX_PF_LAT_LBN 4
+#define	FRF_AA_RX_MAX_PF_LAT_WIDTH 4
+#define	FRF_AA_RX_MAX_LU_LAT_LBN 0
+#define	FRF_AA_RX_MAX_LU_LAT_WIDTH 4
+
+/* RX_DEBUG_REG: undocumented register */
+#define	FR_AZ_RX_DEBUG 0x000008a0
+#define	FRF_AZ_RX_DEBUG_LBN 0
+#define	FRF_AZ_RX_DEBUG_WIDTH 64
+
+/* RX_PUSH_DROP_REG: Receive descriptor push dropped counter register */
+#define	FR_AZ_RX_PUSH_DROP 0x000008b0
+#define	FRF_AZ_RX_PUSH_DROP_CNT_LBN 0
+#define	FRF_AZ_RX_PUSH_DROP_CNT_WIDTH 32
+
+/* RX_RSS_IPV6_REG1: IPv6 RSS Toeplitz hash key low bytes */
+#define	FR_CZ_RX_RSS_IPV6_REG1 0x000008d0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_LO_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_LO_WIDTH 128
+
+/* RX_RSS_IPV6_REG2: IPv6 RSS Toeplitz hash key middle bytes */
+#define	FR_CZ_RX_RSS_IPV6_REG2 0x000008e0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_MID_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_MID_WIDTH 128
+
+/* RX_RSS_IPV6_REG3: IPv6 RSS Toeplitz hash key upper bytes and IPv6 RSS settings */
+#define	FR_CZ_RX_RSS_IPV6_REG3 0x000008f0
+#define	FRF_CZ_RX_RSS_IPV6_THASH_ENABLE_LBN 66
+#define	FRF_CZ_RX_RSS_IPV6_THASH_ENABLE_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_IP_THASH_ENABLE_LBN 65
+#define	FRF_CZ_RX_RSS_IPV6_IP_THASH_ENABLE_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_TCP_SUPPRESS_LBN 64
+#define	FRF_CZ_RX_RSS_IPV6_TCP_SUPPRESS_WIDTH 1
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_HI_LBN 0
+#define	FRF_CZ_RX_RSS_IPV6_TKEY_HI_WIDTH 64
+
+/* TX_FLUSH_DESCQ_REG: Transmit flush descriptor queue register */
+#define	FR_AZ_TX_FLUSH_DESCQ 0x00000a00
+#define	FRF_AZ_TX_FLUSH_DESCQ_CMD_LBN 12
+#define	FRF_AZ_TX_FLUSH_DESCQ_CMD_WIDTH 1
+#define	FRF_AZ_TX_FLUSH_DESCQ_LBN 0
+#define	FRF_AZ_TX_FLUSH_DESCQ_WIDTH 12
+
+/* TX_DESC_UPD_REGP0: Transmit descriptor update register. */
+#define	FR_BZ_TX_DESC_UPD_P0 0x00000a10
+#define	FR_BZ_TX_DESC_UPD_P0_STEP 8192
+#define	FR_BZ_TX_DESC_UPD_P0_ROWS 1024
+/* TX_DESC_UPD_REG_KER: Transmit descriptor update register. */
+#define	FR_AA_TX_DESC_UPD_KER 0x00000a10
+#define	FR_AA_TX_DESC_UPD_KER_STEP 8192
+#define	FR_AA_TX_DESC_UPD_KER_ROWS 8
+/* TX_DESC_UPD_REGP123: Transmit descriptor update register. */
+#define	FR_BB_TX_DESC_UPD_P123 0x01000a10
+#define	FR_BB_TX_DESC_UPD_P123_STEP 8192
+#define	FR_BB_TX_DESC_UPD_P123_ROWS 3072
+#define	FRF_AZ_TX_DESC_WPTR_LBN 96
+#define	FRF_AZ_TX_DESC_WPTR_WIDTH 12
+#define	FRF_AZ_TX_DESC_PUSH_CMD_LBN 95
+#define	FRF_AZ_TX_DESC_PUSH_CMD_WIDTH 1
+#define	FRF_AZ_TX_DESC_LBN 0
+#define	FRF_AZ_TX_DESC_WIDTH 95
+
+/* TX_DC_CFG_REG: Transmit descriptor cache configuration register */
+#define	FR_AZ_TX_DC_CFG 0x00000a20
+#define	FRF_AZ_TX_DC_SIZE_LBN 0
+#define	FRF_AZ_TX_DC_SIZE_WIDTH 2
+#define	FFE_AZ_TX_DC_SIZE_32 2
+#define	FFE_AZ_TX_DC_SIZE_16 1
+#define	FFE_AZ_TX_DC_SIZE_8 0
+
+/* TX_CHKSM_CFG_REG: Transmit checksum configuration register */
+#define	FR_AA_TX_CHKSM_CFG 0x00000a30
+#define	FRF_AA_TX_Q_CHKSM_DIS_96_127_LBN 96
+#define	FRF_AA_TX_Q_CHKSM_DIS_96_127_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_64_95_LBN 64
+#define	FRF_AA_TX_Q_CHKSM_DIS_64_95_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_32_63_LBN 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_32_63_WIDTH 32
+#define	FRF_AA_TX_Q_CHKSM_DIS_0_31_LBN 0
+#define	FRF_AA_TX_Q_CHKSM_DIS_0_31_WIDTH 32
+
+/* TX_CFG_REG: Transmit configuration register */
+#define	FR_AZ_TX_CFG 0x00000a50
+#define	FRF_CZ_TX_CONT_LOOKUP_THRESH_RANGE_LBN 114
+#define	FRF_CZ_TX_CONT_LOOKUP_THRESH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_FILTER_TEST_MODE_BIT_LBN 113
+#define	FRF_CZ_TX_FILTER_TEST_MODE_BIT_WIDTH 1
+#define	FRF_CZ_TX_ETH_FILTER_WILD_SEARCH_RANGE_LBN 105
+#define	FRF_CZ_TX_ETH_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_ETH_FILTER_FULL_SEARCH_RANGE_LBN 97
+#define	FRF_CZ_TX_ETH_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_UDPIP_FILTER_WILD_SEARCH_RANGE_LBN 89
+#define	FRF_CZ_TX_UDPIP_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_UDPIP_FILTER_FULL_SEARCH_RANGE_LBN 81
+#define	FRF_CZ_TX_UDPIP_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_TCPIP_FILTER_WILD_SEARCH_RANGE_LBN 73
+#define	FRF_CZ_TX_TCPIP_FILTER_WILD_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_TCPIP_FILTER_FULL_SEARCH_RANGE_LBN 65
+#define	FRF_CZ_TX_TCPIP_FILTER_FULL_SEARCH_RANGE_WIDTH 8
+#define	FRF_CZ_TX_FILTER_ALL_VLAN_ETHERTYPES_BIT_LBN 64
+#define	FRF_CZ_TX_FILTER_ALL_VLAN_ETHERTYPES_BIT_WIDTH 1
+#define	FRF_CZ_TX_VLAN_MATCH_ETHERTYPE_RANGE_LBN 48
+#define	FRF_CZ_TX_VLAN_MATCH_ETHERTYPE_RANGE_WIDTH 16
+#define	FRF_CZ_TX_FILTER_EN_BIT_LBN 47
+#define	FRF_CZ_TX_FILTER_EN_BIT_WIDTH 1
+#define	FRF_AZ_TX_IP_ID_P0_OFS_LBN 16
+#define	FRF_AZ_TX_IP_ID_P0_OFS_WIDTH 15
+#define	FRF_AZ_TX_NO_EOP_DISC_EN_LBN 5
+#define	FRF_AZ_TX_NO_EOP_DISC_EN_WIDTH 1
+#define	FRF_AZ_TX_P1_PRI_EN_LBN 4
+#define	FRF_AZ_TX_P1_PRI_EN_WIDTH 1
+#define	FRF_AZ_TX_OWNERR_CTL_LBN 2
+#define	FRF_AZ_TX_OWNERR_CTL_WIDTH 1
+#define	FRF_AA_TX_NON_IP_DROP_DIS_LBN 1
+#define	FRF_AA_TX_NON_IP_DROP_DIS_WIDTH 1
+#define	FRF_AZ_TX_IP_ID_REP_EN_LBN 0
+#define	FRF_AZ_TX_IP_ID_REP_EN_WIDTH 1
+
+/* TX_PUSH_DROP_REG: Transmit push dropped register */
+#define	FR_AZ_TX_PUSH_DROP 0x00000a60
+#define	FRF_AZ_TX_PUSH_DROP_CNT_LBN 0
+#define	FRF_AZ_TX_PUSH_DROP_CNT_WIDTH 32
+
+/* TX_RESERVED_REG: Transmit configuration register */
+#define	FR_AZ_TX_RESERVED 0x00000a80
+#define	FRF_AZ_TX_EVT_CNT_LBN 121
+#define	FRF_AZ_TX_EVT_CNT_WIDTH 7
+#define	FRF_AZ_TX_PREF_AGE_CNT_LBN 119
+#define	FRF_AZ_TX_PREF_AGE_CNT_WIDTH 2
+#define	FRF_AZ_TX_RD_COMP_TMR_LBN 96
+#define	FRF_AZ_TX_RD_COMP_TMR_WIDTH 23
+#define	FRF_AZ_TX_PUSH_EN_LBN 89
+#define	FRF_AZ_TX_PUSH_EN_WIDTH 1
+#define	FRF_AZ_TX_PUSH_CHK_DIS_LBN 88
+#define	FRF_AZ_TX_PUSH_CHK_DIS_WIDTH 1
+#define	FRF_AZ_TX_D_FF_FULL_P0_LBN 85
+#define	FRF_AZ_TX_D_FF_FULL_P0_WIDTH 1
+#define	FRF_AZ_TX_DMAR_ST_P0_LBN 81
+#define	FRF_AZ_TX_DMAR_ST_P0_WIDTH 1
+#define	FRF_AZ_TX_DMAQ_ST_LBN 78
+#define	FRF_AZ_TX_DMAQ_ST_WIDTH 1
+#define	FRF_AZ_TX_RX_SPACER_LBN 64
+#define	FRF_AZ_TX_RX_SPACER_WIDTH 8
+#define	FRF_AZ_TX_DROP_ABORT_EN_LBN 60
+#define	FRF_AZ_TX_DROP_ABORT_EN_WIDTH 1
+#define	FRF_AZ_TX_SOFT_EVT_EN_LBN 59
+#define	FRF_AZ_TX_SOFT_EVT_EN_WIDTH 1
+#define	FRF_AZ_TX_PS_EVT_DIS_LBN 58
+#define	FRF_AZ_TX_PS_EVT_DIS_WIDTH 1
+#define	FRF_AZ_TX_RX_SPACER_EN_LBN 57
+#define	FRF_AZ_TX_RX_SPACER_EN_WIDTH 1
+#define	FRF_AZ_TX_XP_TIMER_LBN 52
+#define	FRF_AZ_TX_XP_TIMER_WIDTH 5
+#define	FRF_AZ_TX_PREF_SPACER_LBN 44
+#define	FRF_AZ_TX_PREF_SPACER_WIDTH 8
+#define	FRF_AZ_TX_PREF_WD_TMR_LBN 22
+#define	FRF_AZ_TX_PREF_WD_TMR_WIDTH 22
+#define	FRF_AZ_TX_ONLY1TAG_LBN 21
+#define	FRF_AZ_TX_ONLY1TAG_WIDTH 1
+#define	FRF_AZ_TX_PREF_THRESHOLD_LBN 19
+#define	FRF_AZ_TX_PREF_THRESHOLD_WIDTH 2
+#define	FRF_AZ_TX_ONE_PKT_PER_Q_LBN 18
+#define	FRF_AZ_TX_ONE_PKT_PER_Q_WIDTH 1
+#define	FRF_AZ_TX_DIS_NON_IP_EV_LBN 17
+#define	FRF_AZ_TX_DIS_NON_IP_EV_WIDTH 1
+#define	FRF_AA_TX_DMA_FF_THR_LBN 16
+#define	FRF_AA_TX_DMA_FF_THR_WIDTH 1
+#define	FRF_AZ_TX_DMA_SPACER_LBN 8
+#define	FRF_AZ_TX_DMA_SPACER_WIDTH 8
+#define	FRF_AA_TX_TCP_DIS_LBN 7
+#define	FRF_AA_TX_TCP_DIS_WIDTH 1
+#define	FRF_BZ_TX_FLUSH_MIN_LEN_EN_LBN 7
+#define	FRF_BZ_TX_FLUSH_MIN_LEN_EN_WIDTH 1
+#define	FRF_AA_TX_IP_DIS_LBN 6
+#define	FRF_AA_TX_IP_DIS_WIDTH 1
+#define	FRF_AZ_TX_MAX_CPL_LBN 2
+#define	FRF_AZ_TX_MAX_CPL_WIDTH 2
+#define	FFE_AZ_TX_MAX_CPL_16 3
+#define	FFE_AZ_TX_MAX_CPL_8 2
+#define	FFE_AZ_TX_MAX_CPL_4 1
+#define	FFE_AZ_TX_MAX_CPL_NOLIMIT 0
+#define	FRF_AZ_TX_MAX_PREF_LBN 0
+#define	FRF_AZ_TX_MAX_PREF_WIDTH 2
+#define	FFE_AZ_TX_MAX_PREF_32 3
+#define	FFE_AZ_TX_MAX_PREF_16 2
+#define	FFE_AZ_TX_MAX_PREF_8 1
+#define	FFE_AZ_TX_MAX_PREF_OFF 0
+
+/* TX_PACE_REG: Transmit pace control register */
+#define	FR_BZ_TX_PACE 0x00000a90
+#define	FRF_BZ_TX_PACE_SB_NOT_AF_LBN 19
+#define	FRF_BZ_TX_PACE_SB_NOT_AF_WIDTH 10
+#define	FRF_BZ_TX_PACE_SB_AF_LBN 9
+#define	FRF_BZ_TX_PACE_SB_AF_WIDTH 10
+#define	FRF_BZ_TX_PACE_FB_BASE_LBN 5
+#define	FRF_BZ_TX_PACE_FB_BASE_WIDTH 4
+#define	FRF_BZ_TX_PACE_BIN_TH_LBN 0
+#define	FRF_BZ_TX_PACE_BIN_TH_WIDTH 5
+
+/* TX_PACE_DROP_QID_REG: PACE Drop QID Counter */
+#define	FR_BZ_TX_PACE_DROP_QID 0x00000aa0
+#define	FRF_BZ_TX_PACE_QID_DRP_CNT_LBN 0
+#define	FRF_BZ_TX_PACE_QID_DRP_CNT_WIDTH 16
+
+/* TX_VLAN_REG: Transmit VLAN tag register */
+#define	FR_BB_TX_VLAN 0x00000ae0
+#define	FRF_BB_TX_VLAN_EN_LBN 127
+#define	FRF_BB_TX_VLAN_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_PORT1_EN_LBN 125
+#define	FRF_BB_TX_VLAN7_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_PORT0_EN_LBN 124
+#define	FRF_BB_TX_VLAN7_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN7_LBN 112
+#define	FRF_BB_TX_VLAN7_WIDTH 12
+#define	FRF_BB_TX_VLAN6_PORT1_EN_LBN 109
+#define	FRF_BB_TX_VLAN6_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN6_PORT0_EN_LBN 108
+#define	FRF_BB_TX_VLAN6_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN6_LBN 96
+#define	FRF_BB_TX_VLAN6_WIDTH 12
+#define	FRF_BB_TX_VLAN5_PORT1_EN_LBN 93
+#define	FRF_BB_TX_VLAN5_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN5_PORT0_EN_LBN 92
+#define	FRF_BB_TX_VLAN5_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN5_LBN 80
+#define	FRF_BB_TX_VLAN5_WIDTH 12
+#define	FRF_BB_TX_VLAN4_PORT1_EN_LBN 77
+#define	FRF_BB_TX_VLAN4_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN4_PORT0_EN_LBN 76
+#define	FRF_BB_TX_VLAN4_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN4_LBN 64
+#define	FRF_BB_TX_VLAN4_WIDTH 12
+#define	FRF_BB_TX_VLAN3_PORT1_EN_LBN 61
+#define	FRF_BB_TX_VLAN3_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN3_PORT0_EN_LBN 60
+#define	FRF_BB_TX_VLAN3_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN3_LBN 48
+#define	FRF_BB_TX_VLAN3_WIDTH 12
+#define	FRF_BB_TX_VLAN2_PORT1_EN_LBN 45
+#define	FRF_BB_TX_VLAN2_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN2_PORT0_EN_LBN 44
+#define	FRF_BB_TX_VLAN2_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN2_LBN 32
+#define	FRF_BB_TX_VLAN2_WIDTH 12
+#define	FRF_BB_TX_VLAN1_PORT1_EN_LBN 29
+#define	FRF_BB_TX_VLAN1_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN1_PORT0_EN_LBN 28
+#define	FRF_BB_TX_VLAN1_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN1_LBN 16
+#define	FRF_BB_TX_VLAN1_WIDTH 12
+#define	FRF_BB_TX_VLAN0_PORT1_EN_LBN 13
+#define	FRF_BB_TX_VLAN0_PORT1_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN0_PORT0_EN_LBN 12
+#define	FRF_BB_TX_VLAN0_PORT0_EN_WIDTH 1
+#define	FRF_BB_TX_VLAN0_LBN 0
+#define	FRF_BB_TX_VLAN0_WIDTH 12
+
+/* TX_IPFIL_PORTEN_REG: Transmit filter control register */
+#define	FR_BZ_TX_IPFIL_PORTEN 0x00000af0
+#define	FRF_BZ_TX_MADR0_FIL_EN_LBN 64
+#define	FRF_BZ_TX_MADR0_FIL_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL31_PORT_EN_LBN 62
+#define	FRF_BB_TX_IPFIL31_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL30_PORT_EN_LBN 60
+#define	FRF_BB_TX_IPFIL30_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL29_PORT_EN_LBN 58
+#define	FRF_BB_TX_IPFIL29_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL28_PORT_EN_LBN 56
+#define	FRF_BB_TX_IPFIL28_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL27_PORT_EN_LBN 54
+#define	FRF_BB_TX_IPFIL27_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL26_PORT_EN_LBN 52
+#define	FRF_BB_TX_IPFIL26_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL25_PORT_EN_LBN 50
+#define	FRF_BB_TX_IPFIL25_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL24_PORT_EN_LBN 48
+#define	FRF_BB_TX_IPFIL24_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL23_PORT_EN_LBN 46
+#define	FRF_BB_TX_IPFIL23_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL22_PORT_EN_LBN 44
+#define	FRF_BB_TX_IPFIL22_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL21_PORT_EN_LBN 42
+#define	FRF_BB_TX_IPFIL21_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL20_PORT_EN_LBN 40
+#define	FRF_BB_TX_IPFIL20_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL19_PORT_EN_LBN 38
+#define	FRF_BB_TX_IPFIL19_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL18_PORT_EN_LBN 36
+#define	FRF_BB_TX_IPFIL18_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL17_PORT_EN_LBN 34
+#define	FRF_BB_TX_IPFIL17_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL16_PORT_EN_LBN 32
+#define	FRF_BB_TX_IPFIL16_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL15_PORT_EN_LBN 30
+#define	FRF_BB_TX_IPFIL15_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL14_PORT_EN_LBN 28
+#define	FRF_BB_TX_IPFIL14_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL13_PORT_EN_LBN 26
+#define	FRF_BB_TX_IPFIL13_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL12_PORT_EN_LBN 24
+#define	FRF_BB_TX_IPFIL12_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL11_PORT_EN_LBN 22
+#define	FRF_BB_TX_IPFIL11_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL10_PORT_EN_LBN 20
+#define	FRF_BB_TX_IPFIL10_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL9_PORT_EN_LBN 18
+#define	FRF_BB_TX_IPFIL9_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL8_PORT_EN_LBN 16
+#define	FRF_BB_TX_IPFIL8_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL7_PORT_EN_LBN 14
+#define	FRF_BB_TX_IPFIL7_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL6_PORT_EN_LBN 12
+#define	FRF_BB_TX_IPFIL6_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL5_PORT_EN_LBN 10
+#define	FRF_BB_TX_IPFIL5_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL4_PORT_EN_LBN 8
+#define	FRF_BB_TX_IPFIL4_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL3_PORT_EN_LBN 6
+#define	FRF_BB_TX_IPFIL3_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL2_PORT_EN_LBN 4
+#define	FRF_BB_TX_IPFIL2_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL1_PORT_EN_LBN 2
+#define	FRF_BB_TX_IPFIL1_PORT_EN_WIDTH 1
+#define	FRF_BB_TX_IPFIL0_PORT_EN_LBN 0
+#define	FRF_BB_TX_IPFIL0_PORT_EN_WIDTH 1
+
+/* TX_IPFIL_TBL: Transmit IP source address filter table */
+#define	FR_BB_TX_IPFIL_TBL 0x00000b00
+#define	FR_BB_TX_IPFIL_TBL_STEP 16
+#define	FR_BB_TX_IPFIL_TBL_ROWS 16
+#define	FRF_BB_TX_IPFIL_MASK_1_LBN 96
+#define	FRF_BB_TX_IPFIL_MASK_1_WIDTH 32
+#define	FRF_BB_TX_IP_SRC_ADR_1_LBN 64
+#define	FRF_BB_TX_IP_SRC_ADR_1_WIDTH 32
+#define	FRF_BB_TX_IPFIL_MASK_0_LBN 32
+#define	FRF_BB_TX_IPFIL_MASK_0_WIDTH 32
+#define	FRF_BB_TX_IP_SRC_ADR_0_LBN 0
+#define	FRF_BB_TX_IP_SRC_ADR_0_WIDTH 32
+
+/* MD_TXD_REG: PHY management transmit data register */
+#define	FR_AB_MD_TXD 0x00000c00
+#define	FRF_AB_MD_TXD_LBN 0
+#define	FRF_AB_MD_TXD_WIDTH 16
+
+/* MD_RXD_REG: PHY management receive data register */
+#define	FR_AB_MD_RXD 0x00000c10
+#define	FRF_AB_MD_RXD_LBN 0
+#define	FRF_AB_MD_RXD_WIDTH 16
+
+/* MD_CS_REG: PHY management configuration & status register */
+#define	FR_AB_MD_CS 0x00000c20
+#define	FRF_AB_MD_RD_EN_CMD_LBN 15
+#define	FRF_AB_MD_RD_EN_CMD_WIDTH 1
+#define	FRF_AB_MD_WR_EN_CMD_LBN 14
+#define	FRF_AB_MD_WR_EN_CMD_WIDTH 1
+#define	FRF_AB_MD_ADDR_CMD_LBN 13
+#define	FRF_AB_MD_ADDR_CMD_WIDTH 1
+#define	FRF_AB_MD_PT_LBN 7
+#define	FRF_AB_MD_PT_WIDTH 3
+#define	FRF_AB_MD_PL_LBN 6
+#define	FRF_AB_MD_PL_WIDTH 1
+#define	FRF_AB_MD_INT_CLR_LBN 5
+#define	FRF_AB_MD_INT_CLR_WIDTH 1
+#define	FRF_AB_MD_GC_LBN 4
+#define	FRF_AB_MD_GC_WIDTH 1
+#define	FRF_AB_MD_PRSP_LBN 3
+#define	FRF_AB_MD_PRSP_WIDTH 1
+#define	FRF_AB_MD_RIC_LBN 2
+#define	FRF_AB_MD_RIC_WIDTH 1
+#define	FRF_AB_MD_RDC_LBN 1
+#define	FRF_AB_MD_RDC_WIDTH 1
+#define	FRF_AB_MD_WRC_LBN 0
+#define	FRF_AB_MD_WRC_WIDTH 1
+
+/* MD_PHY_ADR_REG: PHY management PHY address register */
+#define	FR_AB_MD_PHY_ADR 0x00000c30
+#define	FRF_AB_MD_PHY_ADR_LBN 0
+#define	FRF_AB_MD_PHY_ADR_WIDTH 16
+
+/* MD_ID_REG: PHY management ID register */
+#define	FR_AB_MD_ID 0x00000c40
+#define	FRF_AB_MD_PRT_ADR_LBN 11
+#define	FRF_AB_MD_PRT_ADR_WIDTH 5
+#define	FRF_AB_MD_DEV_ADR_LBN 6
+#define	FRF_AB_MD_DEV_ADR_WIDTH 5
+
+/* MD_STAT_REG: PHY management status & mask register */
+#define	FR_AB_MD_STAT 0x00000c50
+#define	FRF_AB_MD_PINT_LBN 4
+#define	FRF_AB_MD_PINT_WIDTH 1
+#define	FRF_AB_MD_DONE_LBN 3
+#define	FRF_AB_MD_DONE_WIDTH 1
+#define	FRF_AB_MD_BSERR_LBN 2
+#define	FRF_AB_MD_BSERR_WIDTH 1
+#define	FRF_AB_MD_LNFL_LBN 1
+#define	FRF_AB_MD_LNFL_WIDTH 1
+#define	FRF_AB_MD_BSY_LBN 0
+#define	FRF_AB_MD_BSY_WIDTH 1
+
+/* MAC_STAT_DMA_REG: Port MAC statistical counter DMA register */
+#define	FR_AB_MAC_STAT_DMA 0x00000c60
+#define	FRF_AB_MAC_STAT_DMA_CMD_LBN 48
+#define	FRF_AB_MAC_STAT_DMA_CMD_WIDTH 1
+#define	FRF_AB_MAC_STAT_DMA_ADR_LBN 0
+#define	FRF_AB_MAC_STAT_DMA_ADR_WIDTH 48
+
+/* MAC_CTRL_REG: Port MAC control register */
+#define	FR_AB_MAC_CTRL 0x00000c80
+#define	FRF_AB_MAC_XOFF_VAL_LBN 16
+#define	FRF_AB_MAC_XOFF_VAL_WIDTH 16
+#define	FRF_BB_TXFIFO_DRAIN_EN_LBN 7
+#define	FRF_BB_TXFIFO_DRAIN_EN_WIDTH 1
+#define	FRF_AB_MAC_XG_DISTXCRC_LBN 5
+#define	FRF_AB_MAC_XG_DISTXCRC_WIDTH 1
+#define	FRF_AB_MAC_BCAD_ACPT_LBN 4
+#define	FRF_AB_MAC_BCAD_ACPT_WIDTH 1
+#define	FRF_AB_MAC_UC_PROM_LBN 3
+#define	FRF_AB_MAC_UC_PROM_WIDTH 1
+#define	FRF_AB_MAC_LINK_STATUS_LBN 2
+#define	FRF_AB_MAC_LINK_STATUS_WIDTH 1
+#define	FRF_AB_MAC_SPEED_LBN 0
+#define	FRF_AB_MAC_SPEED_WIDTH 2
+#define	FFE_AB_MAC_SPEED_10G 3
+#define	FFE_AB_MAC_SPEED_1G 2
+#define	FFE_AB_MAC_SPEED_100M 1
+#define	FFE_AB_MAC_SPEED_10M 0
+
+/* GEN_MODE_REG: General Purpose mode register (external interrupt mask) */
+#define	FR_BB_GEN_MODE 0x00000c90
+#define	FRF_BB_XFP_PHY_INT_POL_SEL_LBN 3
+#define	FRF_BB_XFP_PHY_INT_POL_SEL_WIDTH 1
+#define	FRF_BB_XG_PHY_INT_POL_SEL_LBN 2
+#define	FRF_BB_XG_PHY_INT_POL_SEL_WIDTH 1
+#define	FRF_BB_XFP_PHY_INT_MASK_LBN 1
+#define	FRF_BB_XFP_PHY_INT_MASK_WIDTH 1
+#define	FRF_BB_XG_PHY_INT_MASK_LBN 0
+#define	FRF_BB_XG_PHY_INT_MASK_WIDTH 1
+
+/* MAC_MC_HASH_REG0: Multicast address hash table */
+#define	FR_AB_MAC_MC_HASH_REG0 0x00000ca0
+#define	FRF_AB_MAC_MCAST_HASH0_LBN 0
+#define	FRF_AB_MAC_MCAST_HASH0_WIDTH 128
+
+/* MAC_MC_HASH_REG1: Multicast address hash table */
+#define	FR_AB_MAC_MC_HASH_REG1 0x00000cb0
+#define	FRF_AB_MAC_MCAST_HASH1_LBN 0
+#define	FRF_AB_MAC_MCAST_HASH1_WIDTH 128
+
+/* GM_CFG1_REG: GMAC configuration register 1 */
+#define	FR_AB_GM_CFG1 0x00000e00
+#define	FRF_AB_GM_SW_RST_LBN 31
+#define	FRF_AB_GM_SW_RST_WIDTH 1
+#define	FRF_AB_GM_SIM_RST_LBN 30
+#define	FRF_AB_GM_SIM_RST_WIDTH 1
+#define	FRF_AB_GM_RST_RX_MAC_CTL_LBN 19
+#define	FRF_AB_GM_RST_RX_MAC_CTL_WIDTH 1
+#define	FRF_AB_GM_RST_TX_MAC_CTL_LBN 18
+#define	FRF_AB_GM_RST_TX_MAC_CTL_WIDTH 1
+#define	FRF_AB_GM_RST_RX_FUNC_LBN 17
+#define	FRF_AB_GM_RST_RX_FUNC_WIDTH 1
+#define	FRF_AB_GM_RST_TX_FUNC_LBN 16
+#define	FRF_AB_GM_RST_TX_FUNC_WIDTH 1
+#define	FRF_AB_GM_LOOP_LBN 8
+#define	FRF_AB_GM_LOOP_WIDTH 1
+#define	FRF_AB_GM_RX_FC_EN_LBN 5
+#define	FRF_AB_GM_RX_FC_EN_WIDTH 1
+#define	FRF_AB_GM_TX_FC_EN_LBN 4
+#define	FRF_AB_GM_TX_FC_EN_WIDTH 1
+#define	FRF_AB_GM_SYNC_RXEN_LBN 3
+#define	FRF_AB_GM_SYNC_RXEN_WIDTH 1
+#define	FRF_AB_GM_RX_EN_LBN 2
+#define	FRF_AB_GM_RX_EN_WIDTH 1
+#define	FRF_AB_GM_SYNC_TXEN_LBN 1
+#define	FRF_AB_GM_SYNC_TXEN_WIDTH 1
+#define	FRF_AB_GM_TX_EN_LBN 0
+#define	FRF_AB_GM_TX_EN_WIDTH 1
+
+/* GM_CFG2_REG: GMAC configuration register 2 */
+#define	FR_AB_GM_CFG2 0x00000e10
+#define	FRF_AB_GM_PAMBL_LEN_LBN 12
+#define	FRF_AB_GM_PAMBL_LEN_WIDTH 4
+#define	FRF_AB_GM_IF_MODE_LBN 8
+#define	FRF_AB_GM_IF_MODE_WIDTH 2
+#define	FFE_AB_IF_MODE_BYTE_MODE 2
+#define	FFE_AB_IF_MODE_NIBBLE_MODE 1
+#define	FRF_AB_GM_HUGE_FRM_EN_LBN 5
+#define	FRF_AB_GM_HUGE_FRM_EN_WIDTH 1
+#define	FRF_AB_GM_LEN_CHK_LBN 4
+#define	FRF_AB_GM_LEN_CHK_WIDTH 1
+#define	FRF_AB_GM_PAD_CRC_EN_LBN 2
+#define	FRF_AB_GM_PAD_CRC_EN_WIDTH 1
+#define	FRF_AB_GM_CRC_EN_LBN 1
+#define	FRF_AB_GM_CRC_EN_WIDTH 1
+#define	FRF_AB_GM_FD_LBN 0
+#define	FRF_AB_GM_FD_WIDTH 1
+
+/* GM_IPG_REG: GMAC IPG register */
+#define	FR_AB_GM_IPG 0x00000e20
+#define	FRF_AB_GM_NONB2B_IPG1_LBN 24
+#define	FRF_AB_GM_NONB2B_IPG1_WIDTH 7
+#define	FRF_AB_GM_NONB2B_IPG2_LBN 16
+#define	FRF_AB_GM_NONB2B_IPG2_WIDTH 7
+#define	FRF_AB_GM_MIN_IPG_ENF_LBN 8
+#define	FRF_AB_GM_MIN_IPG_ENF_WIDTH 8
+#define	FRF_AB_GM_B2B_IPG_LBN 0
+#define	FRF_AB_GM_B2B_IPG_WIDTH 7
+
+/* GM_HD_REG: GMAC half duplex register */
+#define	FR_AB_GM_HD 0x00000e30
+#define	FRF_AB_GM_ALT_BOFF_VAL_LBN 20
+#define	FRF_AB_GM_ALT_BOFF_VAL_WIDTH 4
+#define	FRF_AB_GM_ALT_BOFF_EN_LBN 19
+#define	FRF_AB_GM_ALT_BOFF_EN_WIDTH 1
+#define	FRF_AB_GM_BP_NO_BOFF_LBN 18
+#define	FRF_AB_GM_BP_NO_BOFF_WIDTH 1
+#define	FRF_AB_GM_DIS_BOFF_LBN 17
+#define	FRF_AB_GM_DIS_BOFF_WIDTH 1
+#define	FRF_AB_GM_EXDEF_TX_EN_LBN 16
+#define	FRF_AB_GM_EXDEF_TX_EN_WIDTH 1
+#define	FRF_AB_GM_RTRY_LIMIT_LBN 12
+#define	FRF_AB_GM_RTRY_LIMIT_WIDTH 4
+#define	FRF_AB_GM_COL_WIN_LBN 0
+#define	FRF_AB_GM_COL_WIN_WIDTH 10
+
+/* GM_MAX_FLEN_REG: GMAC maximum frame length register */
+#define	FR_AB_GM_MAX_FLEN 0x00000e40
+#define	FRF_AB_GM_MAX_FLEN_LBN 0
+#define	FRF_AB_GM_MAX_FLEN_WIDTH 16
+
+/* GM_TEST_REG: GMAC test register */
+#define	FR_AB_GM_TEST 0x00000e70
+#define	FRF_AB_GM_MAX_BOFF_LBN 3
+#define	FRF_AB_GM_MAX_BOFF_WIDTH 1
+#define	FRF_AB_GM_REG_TX_FLOW_EN_LBN 2
+#define	FRF_AB_GM_REG_TX_FLOW_EN_WIDTH 1
+#define	FRF_AB_GM_TEST_PAUSE_LBN 1
+#define	FRF_AB_GM_TEST_PAUSE_WIDTH 1
+#define	FRF_AB_GM_SHORT_SLOT_LBN 0
+#define	FRF_AB_GM_SHORT_SLOT_WIDTH 1
+
+/* GM_ADR1_REG: GMAC station address register 1 */
+#define	FR_AB_GM_ADR1 0x00000f00
+#define	FRF_AB_GM_ADR_B0_LBN 24
+#define	FRF_AB_GM_ADR_B0_WIDTH 8
+#define	FRF_AB_GM_ADR_B1_LBN 16
+#define	FRF_AB_GM_ADR_B1_WIDTH 8
+#define	FRF_AB_GM_ADR_B2_LBN 8
+#define	FRF_AB_GM_ADR_B2_WIDTH 8
+#define	FRF_AB_GM_ADR_B3_LBN 0
+#define	FRF_AB_GM_ADR_B3_WIDTH 8
+
+/* GM_ADR2_REG: GMAC station address register 2 */
+#define	FR_AB_GM_ADR2 0x00000f10
+#define	FRF_AB_GM_ADR_B4_LBN 24
+#define	FRF_AB_GM_ADR_B4_WIDTH 8
+#define	FRF_AB_GM_ADR_B5_LBN 16
+#define	FRF_AB_GM_ADR_B5_WIDTH 8
+
+/* GMF_CFG0_REG: GMAC FIFO configuration register 0 */
+#define	FR_AB_GMF_CFG0 0x00000f20
+#define	FRF_AB_GMF_FTFENRPLY_LBN 20
+#define	FRF_AB_GMF_FTFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_STFENRPLY_LBN 19
+#define	FRF_AB_GMF_STFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_FRFENRPLY_LBN 18
+#define	FRF_AB_GMF_FRFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_SRFENRPLY_LBN 17
+#define	FRF_AB_GMF_SRFENRPLY_WIDTH 1
+#define	FRF_AB_GMF_WTMENRPLY_LBN 16
+#define	FRF_AB_GMF_WTMENRPLY_WIDTH 1
+#define	FRF_AB_GMF_FTFENREQ_LBN 12
+#define	FRF_AB_GMF_FTFENREQ_WIDTH 1
+#define	FRF_AB_GMF_STFENREQ_LBN 11
+#define	FRF_AB_GMF_STFENREQ_WIDTH 1
+#define	FRF_AB_GMF_FRFENREQ_LBN 10
+#define	FRF_AB_GMF_FRFENREQ_WIDTH 1
+#define	FRF_AB_GMF_SRFENREQ_LBN 9
+#define	FRF_AB_GMF_SRFENREQ_WIDTH 1
+#define	FRF_AB_GMF_WTMENREQ_LBN 8
+#define	FRF_AB_GMF_WTMENREQ_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTFT_LBN 4
+#define	FRF_AB_GMF_HSTRSTFT_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTST_LBN 3
+#define	FRF_AB_GMF_HSTRSTST_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTFR_LBN 2
+#define	FRF_AB_GMF_HSTRSTFR_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTSR_LBN 1
+#define	FRF_AB_GMF_HSTRSTSR_WIDTH 1
+#define	FRF_AB_GMF_HSTRSTWT_LBN 0
+#define	FRF_AB_GMF_HSTRSTWT_WIDTH 1
+
+/* GMF_CFG1_REG: GMAC FIFO configuration register 1 */
+#define	FR_AB_GMF_CFG1 0x00000f30
+#define	FRF_AB_GMF_CFGFRTH_LBN 16
+#define	FRF_AB_GMF_CFGFRTH_WIDTH 5
+#define	FRF_AB_GMF_CFGXOFFRTX_LBN 0
+#define	FRF_AB_GMF_CFGXOFFRTX_WIDTH 16
+
+/* GMF_CFG2_REG: GMAC FIFO configuration register 2 */
+#define	FR_AB_GMF_CFG2 0x00000f40
+#define	FRF_AB_GMF_CFGHWM_LBN 16
+#define	FRF_AB_GMF_CFGHWM_WIDTH 6
+#define	FRF_AB_GMF_CFGLWM_LBN 0
+#define	FRF_AB_GMF_CFGLWM_WIDTH 6
+
+/* GMF_CFG3_REG: GMAC FIFO configuration register 3 */
+#define	FR_AB_GMF_CFG3 0x00000f50
+#define	FRF_AB_GMF_CFGHWMFT_LBN 16
+#define	FRF_AB_GMF_CFGHWMFT_WIDTH 6
+#define	FRF_AB_GMF_CFGFTTH_LBN 0
+#define	FRF_AB_GMF_CFGFTTH_WIDTH 6
+
+/* GMF_CFG4_REG: GMAC FIFO configuration register 4 */
+#define	FR_AB_GMF_CFG4 0x00000f60
+#define	FRF_AB_GMF_HSTFLTRFRM_LBN 0
+#define	FRF_AB_GMF_HSTFLTRFRM_WIDTH 18
+
+/* GMF_CFG5_REG: GMAC FIFO configuration register 5 */
+#define	FR_AB_GMF_CFG5 0x00000f70
+#define	FRF_AB_GMF_CFGHDPLX_LBN 22
+#define	FRF_AB_GMF_CFGHDPLX_WIDTH 1
+#define	FRF_AB_GMF_SRFULL_LBN 21
+#define	FRF_AB_GMF_SRFULL_WIDTH 1
+#define	FRF_AB_GMF_HSTSRFULLCLR_LBN 20
+#define	FRF_AB_GMF_HSTSRFULLCLR_WIDTH 1
+#define	FRF_AB_GMF_CFGBYTMODE_LBN 19
+#define	FRF_AB_GMF_CFGBYTMODE_WIDTH 1
+#define	FRF_AB_GMF_HSTDRPLT64_LBN 18
+#define	FRF_AB_GMF_HSTDRPLT64_WIDTH 1
+#define	FRF_AB_GMF_HSTFLTRFRMDC_LBN 0
+#define	FRF_AB_GMF_HSTFLTRFRMDC_WIDTH 18
+
+/* TX_SRC_MAC_TBL: Transmit IP source address filter table */
+#define	FR_BB_TX_SRC_MAC_TBL 0x00001000
+#define	FR_BB_TX_SRC_MAC_TBL_STEP 16
+#define	FR_BB_TX_SRC_MAC_TBL_ROWS 16
+#define	FRF_BB_TX_SRC_MAC_ADR_1_LBN 64
+#define	FRF_BB_TX_SRC_MAC_ADR_1_WIDTH 48
+#define	FRF_BB_TX_SRC_MAC_ADR_0_LBN 0
+#define	FRF_BB_TX_SRC_MAC_ADR_0_WIDTH 48
+
+/* TX_SRC_MAC_CTL_REG: Transmit MAC source address filter control */
+#define	FR_BB_TX_SRC_MAC_CTL 0x00001100
+#define	FRF_BB_TX_SRC_DROP_CTR_LBN 16
+#define	FRF_BB_TX_SRC_DROP_CTR_WIDTH 16
+#define	FRF_BB_TX_SRC_FLTR_EN_LBN 15
+#define	FRF_BB_TX_SRC_FLTR_EN_WIDTH 1
+#define	FRF_BB_TX_DROP_CTR_CLR_LBN 12
+#define	FRF_BB_TX_DROP_CTR_CLR_WIDTH 1
+#define	FRF_BB_TX_MAC_QID_SEL_LBN 0
+#define	FRF_BB_TX_MAC_QID_SEL_WIDTH 3
+
+/* XM_ADR_LO_REG: XGMAC address register low */
+#define	FR_AB_XM_ADR_LO 0x00001200
+#define	FRF_AB_XM_ADR_LO_LBN 0
+#define	FRF_AB_XM_ADR_LO_WIDTH 32
+
+/* XM_ADR_HI_REG: XGMAC address register high */
+#define	FR_AB_XM_ADR_HI 0x00001210
+#define	FRF_AB_XM_ADR_HI_LBN 0
+#define	FRF_AB_XM_ADR_HI_WIDTH 16
+
+/* XM_GLB_CFG_REG: XGMAC global configuration */
+#define	FR_AB_XM_GLB_CFG 0x00001220
+#define	FRF_AB_XM_RMTFLT_GEN_LBN 17
+#define	FRF_AB_XM_RMTFLT_GEN_WIDTH 1
+#define	FRF_AB_XM_DEBUG_MODE_LBN 16
+#define	FRF_AB_XM_DEBUG_MODE_WIDTH 1
+#define	FRF_AB_XM_RX_STAT_EN_LBN 11
+#define	FRF_AB_XM_RX_STAT_EN_WIDTH 1
+#define	FRF_AB_XM_TX_STAT_EN_LBN 10
+#define	FRF_AB_XM_TX_STAT_EN_WIDTH 1
+#define	FRF_AB_XM_RX_JUMBO_MODE_LBN 6
+#define	FRF_AB_XM_RX_JUMBO_MODE_WIDTH 1
+#define	FRF_AB_XM_WAN_MODE_LBN 5
+#define	FRF_AB_XM_WAN_MODE_WIDTH 1
+#define	FRF_AB_XM_INTCLR_MODE_LBN 3
+#define	FRF_AB_XM_INTCLR_MODE_WIDTH 1
+#define	FRF_AB_XM_CORE_RST_LBN 0
+#define	FRF_AB_XM_CORE_RST_WIDTH 1
+
+/* XM_TX_CFG_REG: XGMAC transmit configuration */
+#define	FR_AB_XM_TX_CFG 0x00001230
+#define	FRF_AB_XM_TX_PROG_LBN 24
+#define	FRF_AB_XM_TX_PROG_WIDTH 1
+#define	FRF_AB_XM_IPG_LBN 16
+#define	FRF_AB_XM_IPG_WIDTH 4
+#define	FRF_AB_XM_FCNTL_LBN 10
+#define	FRF_AB_XM_FCNTL_WIDTH 1
+#define	FRF_AB_XM_TXCRC_LBN 8
+#define	FRF_AB_XM_TXCRC_WIDTH 1
+#define	FRF_AB_XM_EDRC_LBN 6
+#define	FRF_AB_XM_EDRC_WIDTH 1
+#define	FRF_AB_XM_AUTO_PAD_LBN 5
+#define	FRF_AB_XM_AUTO_PAD_WIDTH 1
+#define	FRF_AB_XM_TX_PRMBL_LBN 2
+#define	FRF_AB_XM_TX_PRMBL_WIDTH 1
+#define	FRF_AB_XM_TXEN_LBN 1
+#define	FRF_AB_XM_TXEN_WIDTH 1
+#define	FRF_AB_XM_TX_RST_LBN 0
+#define	FRF_AB_XM_TX_RST_WIDTH 1
+
+/* XM_RX_CFG_REG: XGMAC receive configuration */
+#define	FR_AB_XM_RX_CFG 0x00001240
+#define	FRF_AB_XM_PASS_LENERR_LBN 26
+#define	FRF_AB_XM_PASS_LENERR_WIDTH 1
+#define	FRF_AB_XM_PASS_CRC_ERR_LBN 25
+#define	FRF_AB_XM_PASS_CRC_ERR_WIDTH 1
+#define	FRF_AB_XM_PASS_PRMBLE_ERR_LBN 24
+#define	FRF_AB_XM_PASS_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_REJ_BCAST_LBN 20
+#define	FRF_AB_XM_REJ_BCAST_WIDTH 1
+#define	FRF_AB_XM_ACPT_ALL_MCAST_LBN 11
+#define	FRF_AB_XM_ACPT_ALL_MCAST_WIDTH 1
+#define	FRF_AB_XM_ACPT_ALL_UCAST_LBN 9
+#define	FRF_AB_XM_ACPT_ALL_UCAST_WIDTH 1
+#define	FRF_AB_XM_AUTO_DEPAD_LBN 8
+#define	FRF_AB_XM_AUTO_DEPAD_WIDTH 1
+#define	FRF_AB_XM_RXCRC_LBN 3
+#define	FRF_AB_XM_RXCRC_WIDTH 1
+#define	FRF_AB_XM_RX_PRMBL_LBN 2
+#define	FRF_AB_XM_RX_PRMBL_WIDTH 1
+#define	FRF_AB_XM_RXEN_LBN 1
+#define	FRF_AB_XM_RXEN_WIDTH 1
+#define	FRF_AB_XM_RX_RST_LBN 0
+#define	FRF_AB_XM_RX_RST_WIDTH 1
+
+/* XM_MGT_INT_MASK: documentation to be written for sum_XM_MGT_INT_MASK */
+#define	FR_AB_XM_MGT_INT_MASK 0x00001250
+#define	FRF_AB_XM_MSK_STA_INTR_LBN 16
+#define	FRF_AB_XM_MSK_STA_INTR_WIDTH 1
+#define	FRF_AB_XM_MSK_STAT_CNTR_HF_LBN 9
+#define	FRF_AB_XM_MSK_STAT_CNTR_HF_WIDTH 1
+#define	FRF_AB_XM_MSK_STAT_CNTR_OF_LBN 8
+#define	FRF_AB_XM_MSK_STAT_CNTR_OF_WIDTH 1
+#define	FRF_AB_XM_MSK_PRMBLE_ERR_LBN 2
+#define	FRF_AB_XM_MSK_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_MSK_RMTFLT_LBN 1
+#define	FRF_AB_XM_MSK_RMTFLT_WIDTH 1
+#define	FRF_AB_XM_MSK_LCLFLT_LBN 0
+#define	FRF_AB_XM_MSK_LCLFLT_WIDTH 1
+
+/* XM_FC_REG: XGMAC flow control register */
+#define	FR_AB_XM_FC 0x00001270
+#define	FRF_AB_XM_PAUSE_TIME_LBN 16
+#define	FRF_AB_XM_PAUSE_TIME_WIDTH 16
+#define	FRF_AB_XM_RX_MAC_STAT_LBN 11
+#define	FRF_AB_XM_RX_MAC_STAT_WIDTH 1
+#define	FRF_AB_XM_TX_MAC_STAT_LBN 10
+#define	FRF_AB_XM_TX_MAC_STAT_WIDTH 1
+#define	FRF_AB_XM_MCNTL_PASS_LBN 8
+#define	FRF_AB_XM_MCNTL_PASS_WIDTH 2
+#define	FRF_AB_XM_REJ_CNTL_UCAST_LBN 6
+#define	FRF_AB_XM_REJ_CNTL_UCAST_WIDTH 1
+#define	FRF_AB_XM_REJ_CNTL_MCAST_LBN 5
+#define	FRF_AB_XM_REJ_CNTL_MCAST_WIDTH 1
+#define	FRF_AB_XM_ZPAUSE_LBN 2
+#define	FRF_AB_XM_ZPAUSE_WIDTH 1
+#define	FRF_AB_XM_XMIT_PAUSE_LBN 1
+#define	FRF_AB_XM_XMIT_PAUSE_WIDTH 1
+#define	FRF_AB_XM_DIS_FCNTL_LBN 0
+#define	FRF_AB_XM_DIS_FCNTL_WIDTH 1
+
+/* XM_PAUSE_TIME_REG: XGMAC pause time register */
+#define	FR_AB_XM_PAUSE_TIME 0x00001290
+#define	FRF_AB_XM_TX_PAUSE_CNT_LBN 16
+#define	FRF_AB_XM_TX_PAUSE_CNT_WIDTH 16
+#define	FRF_AB_XM_RX_PAUSE_CNT_LBN 0
+#define	FRF_AB_XM_RX_PAUSE_CNT_WIDTH 16
+
+/* XM_TX_PARAM_REG: XGMAC transmit parameter register */
+#define	FR_AB_XM_TX_PARAM 0x000012d0
+#define	FRF_AB_XM_TX_JUMBO_MODE_LBN 31
+#define	FRF_AB_XM_TX_JUMBO_MODE_WIDTH 1
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_HI_LBN 19
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_HI_WIDTH 11
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LO_LBN 16
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LO_WIDTH 3
+#define	FRF_AB_XM_PAD_CHAR_LBN 0
+#define	FRF_AB_XM_PAD_CHAR_WIDTH 8
+
+/* XM_RX_PARAM_REG: XGMAC receive parameter register */
+#define	FR_AB_XM_RX_PARAM 0x000012e0
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_HI_LBN 3
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_HI_WIDTH 11
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LO_LBN 0
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LO_WIDTH 3
+
+/* XM_MGT_INT_MSK_REG: XGMAC management interrupt mask register */
+#define	FR_AB_XM_MGT_INT_MSK 0x000012f0
+#define	FRF_AB_XM_STAT_CNTR_OF_LBN 9
+#define	FRF_AB_XM_STAT_CNTR_OF_WIDTH 1
+#define	FRF_AB_XM_STAT_CNTR_HF_LBN 8
+#define	FRF_AB_XM_STAT_CNTR_HF_WIDTH 1
+#define	FRF_AB_XM_PRMBLE_ERR_LBN 2
+#define	FRF_AB_XM_PRMBLE_ERR_WIDTH 1
+#define	FRF_AB_XM_RMTFLT_LBN 1
+#define	FRF_AB_XM_RMTFLT_WIDTH 1
+#define	FRF_AB_XM_LCLFLT_LBN 0
+#define	FRF_AB_XM_LCLFLT_WIDTH 1
+
+/* XX_PWR_RST_REG: XGXS/XAUI powerdown/reset register */
+#define	FR_AB_XX_PWR_RST 0x00001300
+#define	FRF_AB_XX_PWRDND_SIG_LBN 31
+#define	FRF_AB_XX_PWRDND_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNC_SIG_LBN 30
+#define	FRF_AB_XX_PWRDNC_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNB_SIG_LBN 29
+#define	FRF_AB_XX_PWRDNB_SIG_WIDTH 1
+#define	FRF_AB_XX_PWRDNA_SIG_LBN 28
+#define	FRF_AB_XX_PWRDNA_SIG_WIDTH 1
+#define	FRF_AB_XX_SIM_MODE_LBN 27
+#define	FRF_AB_XX_SIM_MODE_WIDTH 1
+#define	FRF_AB_XX_RSTPLLCD_SIG_LBN 25
+#define	FRF_AB_XX_RSTPLLCD_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTPLLAB_SIG_LBN 24
+#define	FRF_AB_XX_RSTPLLAB_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETD_SIG_LBN 23
+#define	FRF_AB_XX_RESETD_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETC_SIG_LBN 22
+#define	FRF_AB_XX_RESETC_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETB_SIG_LBN 21
+#define	FRF_AB_XX_RESETB_SIG_WIDTH 1
+#define	FRF_AB_XX_RESETA_SIG_LBN 20
+#define	FRF_AB_XX_RESETA_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSRX_SIG_LBN 18
+#define	FRF_AB_XX_RSTXGXSRX_SIG_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSTX_SIG_LBN 17
+#define	FRF_AB_XX_RSTXGXSTX_SIG_WIDTH 1
+#define	FRF_AB_XX_SD_RST_ACT_LBN 16
+#define	FRF_AB_XX_SD_RST_ACT_WIDTH 1
+#define	FRF_AB_XX_PWRDND_EN_LBN 15
+#define	FRF_AB_XX_PWRDND_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNC_EN_LBN 14
+#define	FRF_AB_XX_PWRDNC_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNB_EN_LBN 13
+#define	FRF_AB_XX_PWRDNB_EN_WIDTH 1
+#define	FRF_AB_XX_PWRDNA_EN_LBN 12
+#define	FRF_AB_XX_PWRDNA_EN_WIDTH 1
+#define	FRF_AB_XX_RSTPLLCD_EN_LBN 9
+#define	FRF_AB_XX_RSTPLLCD_EN_WIDTH 1
+#define	FRF_AB_XX_RSTPLLAB_EN_LBN 8
+#define	FRF_AB_XX_RSTPLLAB_EN_WIDTH 1
+#define	FRF_AB_XX_RESETD_EN_LBN 7
+#define	FRF_AB_XX_RESETD_EN_WIDTH 1
+#define	FRF_AB_XX_RESETC_EN_LBN 6
+#define	FRF_AB_XX_RESETC_EN_WIDTH 1
+#define	FRF_AB_XX_RESETB_EN_LBN 5
+#define	FRF_AB_XX_RESETB_EN_WIDTH 1
+#define	FRF_AB_XX_RESETA_EN_LBN 4
+#define	FRF_AB_XX_RESETA_EN_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSRX_EN_LBN 2
+#define	FRF_AB_XX_RSTXGXSRX_EN_WIDTH 1
+#define	FRF_AB_XX_RSTXGXSTX_EN_LBN 1
+#define	FRF_AB_XX_RSTXGXSTX_EN_WIDTH 1
+#define	FRF_AB_XX_RST_XX_EN_LBN 0
+#define	FRF_AB_XX_RST_XX_EN_WIDTH 1
+
+/* XX_SD_CTL_REG: XGXS/XAUI powerdown/reset control register */
+#define	FR_AB_XX_SD_CTL 0x00001310
+#define	FRF_AB_XX_TERMADJ1_LBN 17
+#define	FRF_AB_XX_TERMADJ1_WIDTH 1
+#define	FRF_AB_XX_TERMADJ0_LBN 16
+#define	FRF_AB_XX_TERMADJ0_WIDTH 1
+#define	FRF_AB_XX_HIDRVD_LBN 15
+#define	FRF_AB_XX_HIDRVD_WIDTH 1
+#define	FRF_AB_XX_LODRVD_LBN 14
+#define	FRF_AB_XX_LODRVD_WIDTH 1
+#define	FRF_AB_XX_HIDRVC_LBN 13
+#define	FRF_AB_XX_HIDRVC_WIDTH 1
+#define	FRF_AB_XX_LODRVC_LBN 12
+#define	FRF_AB_XX_LODRVC_WIDTH 1
+#define	FRF_AB_XX_HIDRVB_LBN 11
+#define	FRF_AB_XX_HIDRVB_WIDTH 1
+#define	FRF_AB_XX_LODRVB_LBN 10
+#define	FRF_AB_XX_LODRVB_WIDTH 1
+#define	FRF_AB_XX_HIDRVA_LBN 9
+#define	FRF_AB_XX_HIDRVA_WIDTH 1
+#define	FRF_AB_XX_LODRVA_LBN 8
+#define	FRF_AB_XX_LODRVA_WIDTH 1
+#define	FRF_AB_XX_LPBKD_LBN 3
+#define	FRF_AB_XX_LPBKD_WIDTH 1
+#define	FRF_AB_XX_LPBKC_LBN 2
+#define	FRF_AB_XX_LPBKC_WIDTH 1
+#define	FRF_AB_XX_LPBKB_LBN 1
+#define	FRF_AB_XX_LPBKB_WIDTH 1
+#define	FRF_AB_XX_LPBKA_LBN 0
+#define	FRF_AB_XX_LPBKA_WIDTH 1
+
+/* XX_TXDRV_CTL_REG: XAUI SerDes transmit drive control register */
+#define	FR_AB_XX_TXDRV_CTL 0x00001320
+#define	FRF_AB_XX_DEQD_LBN 28
+#define	FRF_AB_XX_DEQD_WIDTH 4
+#define	FRF_AB_XX_DEQC_LBN 24
+#define	FRF_AB_XX_DEQC_WIDTH 4
+#define	FRF_AB_XX_DEQB_LBN 20
+#define	FRF_AB_XX_DEQB_WIDTH 4
+#define	FRF_AB_XX_DEQA_LBN 16
+#define	FRF_AB_XX_DEQA_WIDTH 4
+#define	FRF_AB_XX_DTXD_LBN 12
+#define	FRF_AB_XX_DTXD_WIDTH 4
+#define	FRF_AB_XX_DTXC_LBN 8
+#define	FRF_AB_XX_DTXC_WIDTH 4
+#define	FRF_AB_XX_DTXB_LBN 4
+#define	FRF_AB_XX_DTXB_WIDTH 4
+#define	FRF_AB_XX_DTXA_LBN 0
+#define	FRF_AB_XX_DTXA_WIDTH 4
+
+/* XX_PRBS_CTL_REG: documentation to be written for sum_XX_PRBS_CTL_REG */
+#define	FR_AB_XX_PRBS_CTL 0x00001330
+#define	FRF_AB_XX_CH3_RX_PRBS_SEL_LBN 30
+#define	FRF_AB_XX_CH3_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH3_RX_PRBS_INV_LBN 29
+#define	FRF_AB_XX_CH3_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH3_RX_PRBS_CHKEN_LBN 28
+#define	FRF_AB_XX_CH3_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH2_RX_PRBS_SEL_LBN 26
+#define	FRF_AB_XX_CH2_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH2_RX_PRBS_INV_LBN 25
+#define	FRF_AB_XX_CH2_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH2_RX_PRBS_CHKEN_LBN 24
+#define	FRF_AB_XX_CH2_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH1_RX_PRBS_SEL_LBN 22
+#define	FRF_AB_XX_CH1_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH1_RX_PRBS_INV_LBN 21
+#define	FRF_AB_XX_CH1_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH1_RX_PRBS_CHKEN_LBN 20
+#define	FRF_AB_XX_CH1_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH0_RX_PRBS_SEL_LBN 18
+#define	FRF_AB_XX_CH0_RX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH0_RX_PRBS_INV_LBN 17
+#define	FRF_AB_XX_CH0_RX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH0_RX_PRBS_CHKEN_LBN 16
+#define	FRF_AB_XX_CH0_RX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH3_TX_PRBS_SEL_LBN 14
+#define	FRF_AB_XX_CH3_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH3_TX_PRBS_INV_LBN 13
+#define	FRF_AB_XX_CH3_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH3_TX_PRBS_CHKEN_LBN 12
+#define	FRF_AB_XX_CH3_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH2_TX_PRBS_SEL_LBN 10
+#define	FRF_AB_XX_CH2_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH2_TX_PRBS_INV_LBN 9
+#define	FRF_AB_XX_CH2_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH2_TX_PRBS_CHKEN_LBN 8
+#define	FRF_AB_XX_CH2_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH1_TX_PRBS_SEL_LBN 6
+#define	FRF_AB_XX_CH1_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH1_TX_PRBS_INV_LBN 5
+#define	FRF_AB_XX_CH1_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH1_TX_PRBS_CHKEN_LBN 4
+#define	FRF_AB_XX_CH1_TX_PRBS_CHKEN_WIDTH 1
+#define	FRF_AB_XX_CH0_TX_PRBS_SEL_LBN 2
+#define	FRF_AB_XX_CH0_TX_PRBS_SEL_WIDTH 2
+#define	FRF_AB_XX_CH0_TX_PRBS_INV_LBN 1
+#define	FRF_AB_XX_CH0_TX_PRBS_INV_WIDTH 1
+#define	FRF_AB_XX_CH0_TX_PRBS_CHKEN_LBN 0
+#define	FRF_AB_XX_CH0_TX_PRBS_CHKEN_WIDTH 1
+
+/* XX_PRBS_CHK_REG: documentation to be written for sum_XX_PRBS_CHK_REG */
+#define	FR_AB_XX_PRBS_CHK 0x00001340
+#define	FRF_AB_XX_REV_LB_EN_LBN 16
+#define	FRF_AB_XX_REV_LB_EN_WIDTH 1
+#define	FRF_AB_XX_CH3_DEG_DET_LBN 15
+#define	FRF_AB_XX_CH3_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH3_LFSR_LOCK_IND_LBN 14
+#define	FRF_AB_XX_CH3_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH3_PRBS_FRUN_LBN 13
+#define	FRF_AB_XX_CH3_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH3_ERR_CHK_LBN 12
+#define	FRF_AB_XX_CH3_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH2_DEG_DET_LBN 11
+#define	FRF_AB_XX_CH2_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH2_LFSR_LOCK_IND_LBN 10
+#define	FRF_AB_XX_CH2_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH2_PRBS_FRUN_LBN 9
+#define	FRF_AB_XX_CH2_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH2_ERR_CHK_LBN 8
+#define	FRF_AB_XX_CH2_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH1_DEG_DET_LBN 7
+#define	FRF_AB_XX_CH1_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH1_LFSR_LOCK_IND_LBN 6
+#define	FRF_AB_XX_CH1_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH1_PRBS_FRUN_LBN 5
+#define	FRF_AB_XX_CH1_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH1_ERR_CHK_LBN 4
+#define	FRF_AB_XX_CH1_ERR_CHK_WIDTH 1
+#define	FRF_AB_XX_CH0_DEG_DET_LBN 3
+#define	FRF_AB_XX_CH0_DEG_DET_WIDTH 1
+#define	FRF_AB_XX_CH0_LFSR_LOCK_IND_LBN 2
+#define	FRF_AB_XX_CH0_LFSR_LOCK_IND_WIDTH 1
+#define	FRF_AB_XX_CH0_PRBS_FRUN_LBN 1
+#define	FRF_AB_XX_CH0_PRBS_FRUN_WIDTH 1
+#define	FRF_AB_XX_CH0_ERR_CHK_LBN 0
+#define	FRF_AB_XX_CH0_ERR_CHK_WIDTH 1
+
+/* XX_PRBS_ERR_REG: documentation to be written for sum_XX_PRBS_ERR_REG */
+#define	FR_AB_XX_PRBS_ERR 0x00001350
+#define	FRF_AB_XX_CH3_PRBS_ERR_CNT_LBN 24
+#define	FRF_AB_XX_CH3_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH2_PRBS_ERR_CNT_LBN 16
+#define	FRF_AB_XX_CH2_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH1_PRBS_ERR_CNT_LBN 8
+#define	FRF_AB_XX_CH1_PRBS_ERR_CNT_WIDTH 8
+#define	FRF_AB_XX_CH0_PRBS_ERR_CNT_LBN 0
+#define	FRF_AB_XX_CH0_PRBS_ERR_CNT_WIDTH 8
+
+/* XX_CORE_STAT_REG: XAUI XGXS core status register */
+#define	FR_AB_XX_CORE_STAT 0x00001360
+#define	FRF_AB_XX_FORCE_SIG3_LBN 31
+#define	FRF_AB_XX_FORCE_SIG3_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG3_VAL_LBN 30
+#define	FRF_AB_XX_FORCE_SIG3_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG2_LBN 29
+#define	FRF_AB_XX_FORCE_SIG2_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG2_VAL_LBN 28
+#define	FRF_AB_XX_FORCE_SIG2_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG1_LBN 27
+#define	FRF_AB_XX_FORCE_SIG1_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG1_VAL_LBN 26
+#define	FRF_AB_XX_FORCE_SIG1_VAL_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG0_LBN 25
+#define	FRF_AB_XX_FORCE_SIG0_WIDTH 1
+#define	FRF_AB_XX_FORCE_SIG0_VAL_LBN 24
+#define	FRF_AB_XX_FORCE_SIG0_VAL_WIDTH 1
+#define	FRF_AB_XX_XGXS_LB_EN_LBN 23
+#define	FRF_AB_XX_XGXS_LB_EN_WIDTH 1
+#define	FRF_AB_XX_XGMII_LB_EN_LBN 22
+#define	FRF_AB_XX_XGMII_LB_EN_WIDTH 1
+#define	FRF_AB_XX_MATCH_FAULT_LBN 21
+#define	FRF_AB_XX_MATCH_FAULT_WIDTH 1
+#define	FRF_AB_XX_ALIGN_DONE_LBN 20
+#define	FRF_AB_XX_ALIGN_DONE_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT3_LBN 19
+#define	FRF_AB_XX_SYNC_STAT3_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT2_LBN 18
+#define	FRF_AB_XX_SYNC_STAT2_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT1_LBN 17
+#define	FRF_AB_XX_SYNC_STAT1_WIDTH 1
+#define	FRF_AB_XX_SYNC_STAT0_LBN 16
+#define	FRF_AB_XX_SYNC_STAT0_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH3_LBN 15
+#define	FRF_AB_XX_COMMA_DET_CH3_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH2_LBN 14
+#define	FRF_AB_XX_COMMA_DET_CH2_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH1_LBN 13
+#define	FRF_AB_XX_COMMA_DET_CH1_WIDTH 1
+#define	FRF_AB_XX_COMMA_DET_CH0_LBN 12
+#define	FRF_AB_XX_COMMA_DET_CH0_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH3_LBN 11
+#define	FRF_AB_XX_CGRP_ALIGN_CH3_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH2_LBN 10
+#define	FRF_AB_XX_CGRP_ALIGN_CH2_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH1_LBN 9
+#define	FRF_AB_XX_CGRP_ALIGN_CH1_WIDTH 1
+#define	FRF_AB_XX_CGRP_ALIGN_CH0_LBN 8
+#define	FRF_AB_XX_CGRP_ALIGN_CH0_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH3_LBN 7
+#define	FRF_AB_XX_CHAR_ERR_CH3_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH2_LBN 6
+#define	FRF_AB_XX_CHAR_ERR_CH2_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH1_LBN 5
+#define	FRF_AB_XX_CHAR_ERR_CH1_WIDTH 1
+#define	FRF_AB_XX_CHAR_ERR_CH0_LBN 4
+#define	FRF_AB_XX_CHAR_ERR_CH0_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH3_LBN 3
+#define	FRF_AB_XX_DISPERR_CH3_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH2_LBN 2
+#define	FRF_AB_XX_DISPERR_CH2_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH1_LBN 1
+#define	FRF_AB_XX_DISPERR_CH1_WIDTH 1
+#define	FRF_AB_XX_DISPERR_CH0_LBN 0
+#define	FRF_AB_XX_DISPERR_CH0_WIDTH 1
+
+/* RX_DESC_PTR_TBL_KER: Receive descriptor pointer table */
+#define	FR_AA_RX_DESC_PTR_TBL_KER 0x00011800
+#define	FR_AA_RX_DESC_PTR_TBL_KER_STEP 16
+#define	FR_AA_RX_DESC_PTR_TBL_KER_ROWS 4
+/* RX_DESC_PTR_TBL: Receive descriptor pointer table */
+#define	FR_BZ_RX_DESC_PTR_TBL 0x00f40000
+#define	FR_BZ_RX_DESC_PTR_TBL_STEP 16
+#define	FR_BB_RX_DESC_PTR_TBL_ROWS 4096
+#define	FR_CZ_RX_DESC_PTR_TBL_ROWS 1024
+#define	FRF_CZ_RX_HDR_SPLIT_LBN 90
+#define	FRF_CZ_RX_HDR_SPLIT_WIDTH 1
+#define	FRF_AA_RX_RESET_LBN 89
+#define	FRF_AA_RX_RESET_WIDTH 1
+#define	FRF_AZ_RX_ISCSI_DDIG_EN_LBN 88
+#define	FRF_AZ_RX_ISCSI_DDIG_EN_WIDTH 1
+#define	FRF_AZ_RX_ISCSI_HDIG_EN_LBN 87
+#define	FRF_AZ_RX_ISCSI_HDIG_EN_WIDTH 1
+#define	FRF_AZ_RX_DESC_PREF_ACT_LBN 86
+#define	FRF_AZ_RX_DESC_PREF_ACT_WIDTH 1
+#define	FRF_AZ_RX_DC_HW_RPTR_LBN 80
+#define	FRF_AZ_RX_DC_HW_RPTR_WIDTH 6
+#define	FRF_AZ_RX_DESCQ_HW_RPTR_LBN 68
+#define	FRF_AZ_RX_DESCQ_HW_RPTR_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_SW_WPTR_LBN 56
+#define	FRF_AZ_RX_DESCQ_SW_WPTR_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_BUF_BASE_ID_LBN 36
+#define	FRF_AZ_RX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define	FRF_AZ_RX_DESCQ_EVQ_ID_LBN 24
+#define	FRF_AZ_RX_DESCQ_EVQ_ID_WIDTH 12
+#define	FRF_AZ_RX_DESCQ_OWNER_ID_LBN 10
+#define	FRF_AZ_RX_DESCQ_OWNER_ID_WIDTH 14
+#define	FRF_AZ_RX_DESCQ_LABEL_LBN 5
+#define	FRF_AZ_RX_DESCQ_LABEL_WIDTH 5
+#define	FRF_AZ_RX_DESCQ_SIZE_LBN 3
+#define	FRF_AZ_RX_DESCQ_SIZE_WIDTH 2
+#define	FFE_AZ_RX_DESCQ_SIZE_4K 3
+#define	FFE_AZ_RX_DESCQ_SIZE_2K 2
+#define	FFE_AZ_RX_DESCQ_SIZE_1K 1
+#define	FFE_AZ_RX_DESCQ_SIZE_512 0
+#define	FRF_AZ_RX_DESCQ_TYPE_LBN 2
+#define	FRF_AZ_RX_DESCQ_TYPE_WIDTH 1
+#define	FRF_AZ_RX_DESCQ_JUMBO_LBN 1
+#define	FRF_AZ_RX_DESCQ_JUMBO_WIDTH 1
+#define	FRF_AZ_RX_DESCQ_EN_LBN 0
+#define	FRF_AZ_RX_DESCQ_EN_WIDTH 1
+
+/* TX_DESC_PTR_TBL_KER: Transmit descriptor pointer */
+#define	FR_AA_TX_DESC_PTR_TBL_KER 0x00011900
+#define	FR_AA_TX_DESC_PTR_TBL_KER_STEP 16
+#define	FR_AA_TX_DESC_PTR_TBL_KER_ROWS 8
+/* TX_DESC_PTR_TBL: Transmit descriptor pointer */
+#define	FR_BZ_TX_DESC_PTR_TBL 0x00f50000
+#define	FR_BZ_TX_DESC_PTR_TBL_STEP 16
+#define	FR_BB_TX_DESC_PTR_TBL_ROWS 4096
+#define	FR_CZ_TX_DESC_PTR_TBL_ROWS 1024
+#define	FRF_CZ_TX_DPT_Q_MASK_WIDTH_LBN 94
+#define	FRF_CZ_TX_DPT_Q_MASK_WIDTH_WIDTH 2
+#define	FRF_CZ_TX_DPT_ETH_FILT_EN_LBN 93
+#define	FRF_CZ_TX_DPT_ETH_FILT_EN_WIDTH 1
+#define	FRF_CZ_TX_DPT_IP_FILT_EN_LBN 92
+#define	FRF_CZ_TX_DPT_IP_FILT_EN_WIDTH 1
+#define	FRF_BZ_TX_NON_IP_DROP_DIS_LBN 91
+#define	FRF_BZ_TX_NON_IP_DROP_DIS_WIDTH 1
+#define	FRF_BZ_TX_IP_CHKSM_DIS_LBN 90
+#define	FRF_BZ_TX_IP_CHKSM_DIS_WIDTH 1
+#define	FRF_BZ_TX_TCP_CHKSM_DIS_LBN 89
+#define	FRF_BZ_TX_TCP_CHKSM_DIS_WIDTH 1
+#define	FRF_AZ_TX_DESCQ_EN_LBN 88
+#define	FRF_AZ_TX_DESCQ_EN_WIDTH 1
+#define	FRF_AZ_TX_ISCSI_DDIG_EN_LBN 87
+#define	FRF_AZ_TX_ISCSI_DDIG_EN_WIDTH 1
+#define	FRF_AZ_TX_ISCSI_HDIG_EN_LBN 86
+#define	FRF_AZ_TX_ISCSI_HDIG_EN_WIDTH 1
+#define	FRF_AZ_TX_DC_HW_RPTR_LBN 80
+#define	FRF_AZ_TX_DC_HW_RPTR_WIDTH 6
+#define	FRF_AZ_TX_DESCQ_HW_RPTR_LBN 68
+#define	FRF_AZ_TX_DESCQ_HW_RPTR_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_SW_WPTR_LBN 56
+#define	FRF_AZ_TX_DESCQ_SW_WPTR_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_BUF_BASE_ID_LBN 36
+#define	FRF_AZ_TX_DESCQ_BUF_BASE_ID_WIDTH 20
+#define	FRF_AZ_TX_DESCQ_EVQ_ID_LBN 24
+#define	FRF_AZ_TX_DESCQ_EVQ_ID_WIDTH 12
+#define	FRF_AZ_TX_DESCQ_OWNER_ID_LBN 10
+#define	FRF_AZ_TX_DESCQ_OWNER_ID_WIDTH 14
+#define	FRF_AZ_TX_DESCQ_LABEL_LBN 5
+#define	FRF_AZ_TX_DESCQ_LABEL_WIDTH 5
+#define	FRF_AZ_TX_DESCQ_SIZE_LBN 3
+#define	FRF_AZ_TX_DESCQ_SIZE_WIDTH 2
+#define	FFE_AZ_TX_DESCQ_SIZE_4K 3
+#define	FFE_AZ_TX_DESCQ_SIZE_2K 2
+#define	FFE_AZ_TX_DESCQ_SIZE_1K 1
+#define	FFE_AZ_TX_DESCQ_SIZE_512 0
+#define	FRF_AZ_TX_DESCQ_TYPE_LBN 1
+#define	FRF_AZ_TX_DESCQ_TYPE_WIDTH 2
+#define	FRF_AZ_TX_DESCQ_FLUSH_LBN 0
+#define	FRF_AZ_TX_DESCQ_FLUSH_WIDTH 1
+
+/* EVQ_PTR_TBL_KER: Event queue pointer table */
+#define	FR_AA_EVQ_PTR_TBL_KER 0x00011a00
+#define	FR_AA_EVQ_PTR_TBL_KER_STEP 16
+#define	FR_AA_EVQ_PTR_TBL_KER_ROWS 4
+/* EVQ_PTR_TBL: Event queue pointer table */
+#define	FR_BZ_EVQ_PTR_TBL 0x00f60000
+#define	FR_BZ_EVQ_PTR_TBL_STEP 16
+#define	FR_CZ_EVQ_PTR_TBL_ROWS 1024
+#define	FR_BB_EVQ_PTR_TBL_ROWS 4096
+#define	FRF_BZ_EVQ_RPTR_IGN_LBN 40
+#define	FRF_BZ_EVQ_RPTR_IGN_WIDTH 1
+#define	FRF_AB_EVQ_WKUP_OR_INT_EN_LBN 39
+#define	FRF_AB_EVQ_WKUP_OR_INT_EN_WIDTH 1
+#define	FRF_CZ_EVQ_DOS_PROTECT_EN_LBN 39
+#define	FRF_CZ_EVQ_DOS_PROTECT_EN_WIDTH 1
+#define	FRF_AZ_EVQ_NXT_WPTR_LBN 24
+#define	FRF_AZ_EVQ_NXT_WPTR_WIDTH 15
+#define	FRF_AZ_EVQ_EN_LBN 23
+#define	FRF_AZ_EVQ_EN_WIDTH 1
+#define	FRF_AZ_EVQ_SIZE_LBN 20
+#define	FRF_AZ_EVQ_SIZE_WIDTH 3
+#define	FFE_AZ_EVQ_SIZE_32K 6
+#define	FFE_AZ_EVQ_SIZE_16K 5
+#define	FFE_AZ_EVQ_SIZE_8K 4
+#define	FFE_AZ_EVQ_SIZE_4K 3
+#define	FFE_AZ_EVQ_SIZE_2K 2
+#define	FFE_AZ_EVQ_SIZE_1K 1
+#define	FFE_AZ_EVQ_SIZE_512 0
+#define	FRF_AZ_EVQ_BUF_BASE_ID_LBN 0
+#define	FRF_AZ_EVQ_BUF_BASE_ID_WIDTH 20
+
+/* BUF_HALF_TBL_KER: Buffer table in half buffer table mode direct access by driver */
+#define	FR_AA_BUF_HALF_TBL_KER 0x00018000
+#define	FR_AA_BUF_HALF_TBL_KER_STEP 8
+#define	FR_AA_BUF_HALF_TBL_KER_ROWS 4096
+/* BUF_HALF_TBL: Buffer table in half buffer table mode direct access by driver */
+#define	FR_BZ_BUF_HALF_TBL 0x00800000
+#define	FR_BZ_BUF_HALF_TBL_STEP 8
+#define	FR_CZ_BUF_HALF_TBL_ROWS 147456
+#define	FR_BB_BUF_HALF_TBL_ROWS 524288
+#define	FRF_AZ_BUF_ADR_HBUF_ODD_LBN 44
+#define	FRF_AZ_BUF_ADR_HBUF_ODD_WIDTH 20
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_ODD_LBN 32
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_ODD_WIDTH 12
+#define	FRF_AZ_BUF_ADR_HBUF_EVEN_LBN 12
+#define	FRF_AZ_BUF_ADR_HBUF_EVEN_WIDTH 20
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_EVEN_LBN 0
+#define	FRF_AZ_BUF_OWNER_ID_HBUF_EVEN_WIDTH 12
+
+/* BUF_FULL_TBL_KER: Buffer table in full buffer table mode direct access by driver */
+#define	FR_AA_BUF_FULL_TBL_KER 0x00018000
+#define	FR_AA_BUF_FULL_TBL_KER_STEP 8
+#define	FR_AA_BUF_FULL_TBL_KER_ROWS 4096
+/* BUF_FULL_TBL: Buffer table in full buffer table mode direct access by driver */
+#define	FR_BZ_BUF_FULL_TBL 0x00800000
+#define	FR_BZ_BUF_FULL_TBL_STEP 8
+#define	FR_CZ_BUF_FULL_TBL_ROWS 147456
+#define	FR_BB_BUF_FULL_TBL_ROWS 917504
+#define	FRF_AZ_BUF_FULL_UNUSED_LBN 51
+#define	FRF_AZ_BUF_FULL_UNUSED_WIDTH 13
+#define	FRF_AZ_IP_DAT_BUF_SIZE_LBN 50
+#define	FRF_AZ_IP_DAT_BUF_SIZE_WIDTH 1
+#define	FRF_AZ_BUF_ADR_REGION_LBN 48
+#define	FRF_AZ_BUF_ADR_REGION_WIDTH 2
+#define	FFE_AZ_BUF_ADR_REGN3 3
+#define	FFE_AZ_BUF_ADR_REGN2 2
+#define	FFE_AZ_BUF_ADR_REGN1 1
+#define	FFE_AZ_BUF_ADR_REGN0 0
+#define	FRF_AZ_BUF_ADR_FBUF_LBN 14
+#define	FRF_AZ_BUF_ADR_FBUF_WIDTH 34
+#define	FRF_AZ_BUF_OWNER_ID_FBUF_LBN 0
+#define	FRF_AZ_BUF_OWNER_ID_FBUF_WIDTH 14
+
+/* RX_FILTER_TBL0: TCP/IPv4 Receive filter table */
+#define	FR_BZ_RX_FILTER_TBL0 0x00f00000
+#define	FR_BZ_RX_FILTER_TBL0_STEP 32
+#define	FR_BZ_RX_FILTER_TBL0_ROWS 8192
+/* RX_FILTER_TBL1: TCP/IPv4 Receive filter table */
+#define	FR_BB_RX_FILTER_TBL1 0x00f00010
+#define	FR_BB_RX_FILTER_TBL1_STEP 32
+#define	FR_BB_RX_FILTER_TBL1_ROWS 8192
+#define	FRF_BZ_RSS_EN_LBN 110
+#define	FRF_BZ_RSS_EN_WIDTH 1
+#define	FRF_BZ_SCATTER_EN_LBN 109
+#define	FRF_BZ_SCATTER_EN_WIDTH 1
+#define	FRF_BZ_TCP_UDP_LBN 108
+#define	FRF_BZ_TCP_UDP_WIDTH 1
+#define	FRF_BZ_RXQ_ID_LBN 96
+#define	FRF_BZ_RXQ_ID_WIDTH 12
+#define	FRF_BZ_DEST_IP_LBN 64
+#define	FRF_BZ_DEST_IP_WIDTH 32
+#define	FRF_BZ_DEST_PORT_TCP_LBN 48
+#define	FRF_BZ_DEST_PORT_TCP_WIDTH 16
+#define	FRF_BZ_SRC_IP_LBN 16
+#define	FRF_BZ_SRC_IP_WIDTH 32
+#define	FRF_BZ_SRC_TCP_DEST_UDP_LBN 0
+#define	FRF_BZ_SRC_TCP_DEST_UDP_WIDTH 16
+
+/* RX_MAC_FILTER_TBL0: Receive Ethernet filter table */
+#define	FR_CZ_RX_MAC_FILTER_TBL0 0x00f00010
+#define	FR_CZ_RX_MAC_FILTER_TBL0_STEP 32
+#define	FR_CZ_RX_MAC_FILTER_TBL0_ROWS 512
+#define	FRF_CZ_RMFT_RSS_EN_LBN 75
+#define	FRF_CZ_RMFT_RSS_EN_WIDTH 1
+#define	FRF_CZ_RMFT_SCATTER_EN_LBN 74
+#define	FRF_CZ_RMFT_SCATTER_EN_WIDTH 1
+#define	FRF_CZ_RMFT_IP_OVERRIDE_LBN 73
+#define	FRF_CZ_RMFT_IP_OVERRIDE_WIDTH 1
+#define	FRF_CZ_RMFT_RXQ_ID_LBN 61
+#define	FRF_CZ_RMFT_RXQ_ID_WIDTH 12
+#define	FRF_CZ_RMFT_WILDCARD_MATCH_LBN 60
+#define	FRF_CZ_RMFT_WILDCARD_MATCH_WIDTH 1
+#define	FRF_CZ_RMFT_DEST_MAC_LBN 16
+#define	FRF_CZ_RMFT_DEST_MAC_WIDTH 44
+#define	FRF_CZ_RMFT_VLAN_ID_LBN 0
+#define	FRF_CZ_RMFT_VLAN_ID_WIDTH 12
+
+/* TIMER_TBL: Timer table */
+#define	FR_BZ_TIMER_TBL 0x00f70000
+#define	FR_BZ_TIMER_TBL_STEP 16
+#define	FR_CZ_TIMER_TBL_ROWS 1024
+#define	FR_BB_TIMER_TBL_ROWS 4096
+#define	FRF_CZ_TIMER_Q_EN_LBN 33
+#define	FRF_CZ_TIMER_Q_EN_WIDTH 1
+#define	FRF_CZ_INT_ARMD_LBN 32
+#define	FRF_CZ_INT_ARMD_WIDTH 1
+#define	FRF_CZ_INT_PEND_LBN 31
+#define	FRF_CZ_INT_PEND_WIDTH 1
+#define	FRF_CZ_HOST_NOTIFY_MODE_LBN 30
+#define	FRF_CZ_HOST_NOTIFY_MODE_WIDTH 1
+#define	FRF_CZ_RELOAD_TIMER_VAL_LBN 16
+#define	FRF_CZ_RELOAD_TIMER_VAL_WIDTH 14
+#define	FRF_CZ_TIMER_MODE_LBN 14
+#define	FRF_CZ_TIMER_MODE_WIDTH 2
+#define	FFE_CZ_TIMER_MODE_INT_HLDOFF 3
+#define	FFE_CZ_TIMER_MODE_TRIG_START 2
+#define	FFE_CZ_TIMER_MODE_IMMED_START 1
+#define	FFE_CZ_TIMER_MODE_DIS 0
+#define	FRF_BB_TIMER_MODE_LBN 12
+#define	FRF_BB_TIMER_MODE_WIDTH 2
+#define	FFE_BB_TIMER_MODE_INT_HLDOFF 2
+#define	FFE_BB_TIMER_MODE_TRIG_START 2
+#define	FFE_BB_TIMER_MODE_IMMED_START 1
+#define	FFE_BB_TIMER_MODE_DIS 0
+#define	FRF_CZ_TIMER_VAL_LBN 0
+#define	FRF_CZ_TIMER_VAL_WIDTH 14
+#define	FRF_BB_TIMER_VAL_LBN 0
+#define	FRF_BB_TIMER_VAL_WIDTH 12
+
+/* TX_PACE_TBL: Transmit pacing table */
+#define	FR_BZ_TX_PACE_TBL 0x00f80000
+#define	FR_BZ_TX_PACE_TBL_STEP 16
+#define	FR_CZ_TX_PACE_TBL_ROWS 1024
+#define	FR_BB_TX_PACE_TBL_ROWS 4096
+#define	FRF_BZ_TX_PACE_LBN 0
+#define	FRF_BZ_TX_PACE_WIDTH 5
+
+/* RX_INDIRECTION_TBL: RX Indirection Table */
+#define	FR_BZ_RX_INDIRECTION_TBL 0x00fb0000
+#define	FR_BZ_RX_INDIRECTION_TBL_STEP 16
+#define	FR_BZ_RX_INDIRECTION_TBL_ROWS 128
+#define	FRF_BZ_IT_QUEUE_LBN 0
+#define	FRF_BZ_IT_QUEUE_WIDTH 6
+
+/* TX_FILTER_TBL0: TCP/IPv4 Transmit filter table */
+#define	FR_CZ_TX_FILTER_TBL0 0x00fc0000
+#define	FR_CZ_TX_FILTER_TBL0_STEP 16
+#define	FR_CZ_TX_FILTER_TBL0_ROWS 8192
+#define	FRF_CZ_TIFT_TCP_UDP_LBN 108
+#define	FRF_CZ_TIFT_TCP_UDP_WIDTH 1
+#define	FRF_CZ_TIFT_TXQ_ID_LBN 96
+#define	FRF_CZ_TIFT_TXQ_ID_WIDTH 12
+#define	FRF_CZ_TIFT_DEST_IP_LBN 64
+#define	FRF_CZ_TIFT_DEST_IP_WIDTH 32
+#define	FRF_CZ_TIFT_DEST_PORT_TCP_LBN 48
+#define	FRF_CZ_TIFT_DEST_PORT_TCP_WIDTH 16
+#define	FRF_CZ_TIFT_SRC_IP_LBN 16
+#define	FRF_CZ_TIFT_SRC_IP_WIDTH 32
+#define	FRF_CZ_TIFT_SRC_TCP_DEST_UDP_LBN 0
+#define	FRF_CZ_TIFT_SRC_TCP_DEST_UDP_WIDTH 16
+
+/* TX_MAC_FILTER_TBL0: Transmit Ethernet filter table */
+#define	FR_CZ_TX_MAC_FILTER_TBL0 0x00fe0000
+#define	FR_CZ_TX_MAC_FILTER_TBL0_STEP 16
+#define	FR_CZ_TX_MAC_FILTER_TBL0_ROWS 512
+#define	FRF_CZ_TMFT_TXQ_ID_LBN 61
+#define	FRF_CZ_TMFT_TXQ_ID_WIDTH 12
+#define	FRF_CZ_TMFT_WILDCARD_MATCH_LBN 60
+#define	FRF_CZ_TMFT_WILDCARD_MATCH_WIDTH 1
+#define	FRF_CZ_TMFT_SRC_MAC_LBN 16
+#define	FRF_CZ_TMFT_SRC_MAC_WIDTH 44
+#define	FRF_CZ_TMFT_VLAN_ID_LBN 0
+#define	FRF_CZ_TMFT_VLAN_ID_WIDTH 12
+
+/* MC_TREG_SMEM: MC Shared Memory */
+#define	FR_CZ_MC_TREG_SMEM 0x00ff0000
+#define	FR_CZ_MC_TREG_SMEM_STEP 4
+#define	FR_CZ_MC_TREG_SMEM_ROWS 512
+#define	FRF_CZ_MC_TREG_SMEM_ROW_LBN 0
+#define	FRF_CZ_MC_TREG_SMEM_ROW_WIDTH 32
+
+/* MSIX_VECTOR_TABLE: MSIX Vector Table */
+#define	FR_BB_MSIX_VECTOR_TABLE 0x00ff0000
+#define	FR_BZ_MSIX_VECTOR_TABLE_STEP 16
+#define	FR_BB_MSIX_VECTOR_TABLE_ROWS 64
+/* MSIX_VECTOR_TABLE: MSIX Vector Table */
+#define	FR_CZ_MSIX_VECTOR_TABLE 0x00000000
+/* FR_BZ_MSIX_VECTOR_TABLE_STEP 16 */
+#define	FR_CZ_MSIX_VECTOR_TABLE_ROWS 1024
+#define	FRF_BZ_MSIX_VECTOR_RESERVED_LBN 97
+#define	FRF_BZ_MSIX_VECTOR_RESERVED_WIDTH 31
+#define	FRF_BZ_MSIX_VECTOR_MASK_LBN 96
+#define	FRF_BZ_MSIX_VECTOR_MASK_WIDTH 1
+#define	FRF_BZ_MSIX_MESSAGE_DATA_LBN 64
+#define	FRF_BZ_MSIX_MESSAGE_DATA_WIDTH 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_HI_LBN 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_HI_WIDTH 32
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_LO_LBN 0
+#define	FRF_BZ_MSIX_MESSAGE_ADDRESS_LO_WIDTH 32
+
+/* MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_BB_MSIX_PBA_TABLE 0x00ff2000
+#define	FR_BZ_MSIX_PBA_TABLE_STEP 4
+#define	FR_BB_MSIX_PBA_TABLE_ROWS 2
+/* MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_CZ_MSIX_PBA_TABLE 0x00008000
+/* FR_BZ_MSIX_PBA_TABLE_STEP 4 */
+#define	FR_CZ_MSIX_PBA_TABLE_ROWS 32
+#define	FRF_BZ_MSIX_PBA_PEND_DWORD_LBN 0
+#define	FRF_BZ_MSIX_PBA_PEND_DWORD_WIDTH 32
+
+/* SRM_DBG_REG: SRAM debug access */
+#define	FR_BZ_SRM_DBG 0x03000000
+#define	FR_BZ_SRM_DBG_STEP 8
+#define	FR_CZ_SRM_DBG_ROWS 262144
+#define	FR_BB_SRM_DBG_ROWS 2097152
+#define	FRF_BZ_SRM_DBG_LBN 0
+#define	FRF_BZ_SRM_DBG_WIDTH 64
+
+/* TB_MSIX_PBA_TABLE: MSIX Pending Bit Array */
+#define	FR_CZ_TB_MSIX_PBA_TABLE 0x00008000
+#define	FR_CZ_TB_MSIX_PBA_TABLE_STEP 4
+#define	FR_CZ_TB_MSIX_PBA_TABLE_ROWS 1024
+#define	FRF_CZ_TB_MSIX_PBA_PEND_DWORD_LBN 0
+#define	FRF_CZ_TB_MSIX_PBA_PEND_DWORD_WIDTH 32
+
+/* DRIVER_EV */
+#define	FSF_AZ_DRIVER_EV_SUBCODE_LBN 56
+#define	FSF_AZ_DRIVER_EV_SUBCODE_WIDTH 4
+#define	FSE_BZ_TX_DSC_ERROR_EV 15
+#define	FSE_BZ_RX_DSC_ERROR_EV 14
+#define	FSE_AA_RX_RECOVER_EV 11
+#define	FSE_AZ_TIMER_EV 10
+#define	FSE_AZ_TX_PKT_NON_TCP_UDP 9
+#define	FSE_AZ_WAKE_UP_EV 6
+#define	FSE_AZ_SRM_UPD_DONE_EV 5
+#define	FSE_AB_EVQ_NOT_EN_EV 3
+#define	FSE_AZ_EVQ_INIT_DONE_EV 2
+#define	FSE_AZ_RX_DESCQ_FLS_DONE_EV 1
+#define	FSE_AZ_TX_DESCQ_FLS_DONE_EV 0
+#define	FSF_AZ_DRIVER_EV_SUBDATA_LBN 0
+#define	FSF_AZ_DRIVER_EV_SUBDATA_WIDTH 14
+
+/* EVENT_ENTRY */
+#define	FSF_AZ_EV_CODE_LBN 60
+#define	FSF_AZ_EV_CODE_WIDTH 4
+#define	FSE_CZ_EV_CODE_MCDI_EV 12
+#define	FSE_CZ_EV_CODE_USER_EV 8
+#define	FSE_AZ_EV_CODE_DRV_GEN_EV 7
+#define	FSE_AZ_EV_CODE_GLOBAL_EV 6
+#define	FSE_AZ_EV_CODE_DRIVER_EV 5
+#define	FSE_AZ_EV_CODE_TX_EV 2
+#define	FSE_AZ_EV_CODE_RX_EV 0
+#define	FSF_AZ_EV_DATA_LBN 0
+#define	FSF_AZ_EV_DATA_WIDTH 60
+
+/* GLOBAL_EV */
+#define	FSF_BB_GLB_EV_RX_RECOVERY_LBN 12
+#define	FSF_BB_GLB_EV_RX_RECOVERY_WIDTH 1
+#define	FSF_AA_GLB_EV_RX_RECOVERY_LBN 11
+#define	FSF_AA_GLB_EV_RX_RECOVERY_WIDTH 1
+#define	FSF_BB_GLB_EV_XG_MGT_INTR_LBN 11
+#define	FSF_BB_GLB_EV_XG_MGT_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_XFP_PHY0_INTR_LBN 10
+#define	FSF_AB_GLB_EV_XFP_PHY0_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_XG_PHY0_INTR_LBN 9
+#define	FSF_AB_GLB_EV_XG_PHY0_INTR_WIDTH 1
+#define	FSF_AB_GLB_EV_G_PHY0_INTR_LBN 7
+#define	FSF_AB_GLB_EV_G_PHY0_INTR_WIDTH 1
+
+/* LEGACY_INT_VEC */
+#define	FSF_AZ_NET_IVEC_FATAL_INT_LBN 64
+#define	FSF_AZ_NET_IVEC_FATAL_INT_WIDTH 1
+#define	FSF_AZ_NET_IVEC_INT_Q_LBN 40
+#define	FSF_AZ_NET_IVEC_INT_Q_WIDTH 4
+#define	FSF_AZ_NET_IVEC_INT_FLAG_LBN 32
+#define	FSF_AZ_NET_IVEC_INT_FLAG_WIDTH 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_HF_LBN 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_HF_WIDTH 1
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_AF_LBN 0
+#define	FSF_AZ_NET_IVEC_EVQ_FIFO_AF_WIDTH 1
+
+/* MC_XGMAC_FLTR_RULE_DEF */
+#define	FSF_CZ_MC_XFRC_MODE_LBN 416
+#define	FSF_CZ_MC_XFRC_MODE_WIDTH 1
+#define	FSE_CZ_MC_XFRC_MODE_LAYERED 1
+#define	FSE_CZ_MC_XFRC_MODE_SIMPLE 0
+#define	FSF_CZ_MC_XFRC_HASH_LBN 384
+#define	FSF_CZ_MC_XFRC_HASH_WIDTH 32
+#define	FSF_CZ_MC_XFRC_LAYER4_BYTE_MASK_LBN 256
+#define	FSF_CZ_MC_XFRC_LAYER4_BYTE_MASK_WIDTH 128
+#define	FSF_CZ_MC_XFRC_LAYER3_BYTE_MASK_LBN 128
+#define	FSF_CZ_MC_XFRC_LAYER3_BYTE_MASK_WIDTH 128
+#define	FSF_CZ_MC_XFRC_LAYER2_OR_SIMPLE_BYTE_MASK_LBN 0
+#define	FSF_CZ_MC_XFRC_LAYER2_OR_SIMPLE_BYTE_MASK_WIDTH 128
+
+/* RX_EV */
+#define	FSF_CZ_RX_EV_PKT_NOT_PARSED_LBN 58
+#define	FSF_CZ_RX_EV_PKT_NOT_PARSED_WIDTH 1
+#define	FSF_CZ_RX_EV_IPV6_PKT_LBN 57
+#define	FSF_CZ_RX_EV_IPV6_PKT_WIDTH 1
+#define	FSF_AZ_RX_EV_PKT_OK_LBN 56
+#define	FSF_AZ_RX_EV_PKT_OK_WIDTH 1
+#define	FSF_AZ_RX_EV_PAUSE_FRM_ERR_LBN 55
+#define	FSF_AZ_RX_EV_PAUSE_FRM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_BUF_OWNER_ID_ERR_LBN 54
+#define	FSF_AZ_RX_EV_BUF_OWNER_ID_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_IP_FRAG_ERR_LBN 53
+#define	FSF_AZ_RX_EV_IP_FRAG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR_LBN 52
+#define	FSF_AZ_RX_EV_IP_HDR_CHKSUM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR_LBN 51
+#define	FSF_AZ_RX_EV_TCP_UDP_CHKSUM_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_ETH_CRC_ERR_LBN 50
+#define	FSF_AZ_RX_EV_ETH_CRC_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_FRM_TRUNC_LBN 49
+#define	FSF_AZ_RX_EV_FRM_TRUNC_WIDTH 1
+#define	FSF_AA_RX_EV_DRIB_NIB_LBN 49
+#define	FSF_AA_RX_EV_DRIB_NIB_WIDTH 1
+#define	FSF_AZ_RX_EV_TOBE_DISC_LBN 47
+#define	FSF_AZ_RX_EV_TOBE_DISC_WIDTH 1
+#define	FSF_AZ_RX_EV_PKT_TYPE_LBN 44
+#define	FSF_AZ_RX_EV_PKT_TYPE_WIDTH 3
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN_JUMBO 5
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN_LLC 4
+#define	FSE_AZ_RX_EV_PKT_TYPE_VLAN 3
+#define	FSE_AZ_RX_EV_PKT_TYPE_JUMBO 2
+#define	FSE_AZ_RX_EV_PKT_TYPE_LLC 1
+#define	FSE_AZ_RX_EV_PKT_TYPE_ETH 0
+#define	FSF_AZ_RX_EV_HDR_TYPE_LBN 42
+#define	FSF_AZ_RX_EV_HDR_TYPE_WIDTH 2
+#define	FSE_AZ_RX_EV_HDR_TYPE_OTHER 3
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_OTHER 2
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_OTHER 2
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_UDP 1
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_UDP 1
+#define	FSE_AB_RX_EV_HDR_TYPE_IPV4_TCP 0
+#define	FSE_CZ_RX_EV_HDR_TYPE_IPV4V6_TCP 0
+#define	FSF_AZ_RX_EV_DESC_Q_EMPTY_LBN 41
+#define	FSF_AZ_RX_EV_DESC_Q_EMPTY_WIDTH 1
+#define	FSF_AZ_RX_EV_MCAST_HASH_MATCH_LBN 40
+#define	FSF_AZ_RX_EV_MCAST_HASH_MATCH_WIDTH 1
+#define	FSF_AZ_RX_EV_MCAST_PKT_LBN 39
+#define	FSF_AZ_RX_EV_MCAST_PKT_WIDTH 1
+#define	FSF_AA_RX_EV_RECOVERY_FLAG_LBN 37
+#define	FSF_AA_RX_EV_RECOVERY_FLAG_WIDTH 1
+#define	FSF_AZ_RX_EV_Q_LABEL_LBN 32
+#define	FSF_AZ_RX_EV_Q_LABEL_WIDTH 5
+#define	FSF_AZ_RX_EV_JUMBO_CONT_LBN 31
+#define	FSF_AZ_RX_EV_JUMBO_CONT_WIDTH 1
+#define	FSF_AZ_RX_EV_PORT_LBN 30
+#define	FSF_AZ_RX_EV_PORT_WIDTH 1
+#define	FSF_AZ_RX_EV_BYTE_CNT_LBN 16
+#define	FSF_AZ_RX_EV_BYTE_CNT_WIDTH 14
+#define	FSF_AZ_RX_EV_SOP_LBN 15
+#define	FSF_AZ_RX_EV_SOP_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_PKT_OK_LBN 14
+#define	FSF_AZ_RX_EV_ISCSI_PKT_OK_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_DDIG_ERR_LBN 13
+#define	FSF_AZ_RX_EV_ISCSI_DDIG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_ISCSI_HDIG_ERR_LBN 12
+#define	FSF_AZ_RX_EV_ISCSI_HDIG_ERR_WIDTH 1
+#define	FSF_AZ_RX_EV_DESC_PTR_LBN 0
+#define	FSF_AZ_RX_EV_DESC_PTR_WIDTH 12
+
+/* RX_KER_DESC */
+#define	FSF_AZ_RX_KER_BUF_SIZE_LBN 48
+#define	FSF_AZ_RX_KER_BUF_SIZE_WIDTH 14
+#define	FSF_AZ_RX_KER_BUF_REGION_LBN 46
+#define	FSF_AZ_RX_KER_BUF_REGION_WIDTH 2
+#define	FSF_AZ_RX_KER_BUF_ADDR_LBN 0
+#define	FSF_AZ_RX_KER_BUF_ADDR_WIDTH 46
+
+/* RX_USER_DESC */
+#define	FSF_AZ_RX_USER_2BYTE_OFFSET_LBN 20
+#define	FSF_AZ_RX_USER_2BYTE_OFFSET_WIDTH 12
+#define	FSF_AZ_RX_USER_BUF_ID_LBN 0
+#define	FSF_AZ_RX_USER_BUF_ID_WIDTH 20
+
+/* TX_EV */
+#define	FSF_AZ_TX_EV_PKT_ERR_LBN 38
+#define	FSF_AZ_TX_EV_PKT_ERR_WIDTH 1
+#define	FSF_AZ_TX_EV_PKT_TOO_BIG_LBN 37
+#define	FSF_AZ_TX_EV_PKT_TOO_BIG_WIDTH 1
+#define	FSF_AZ_TX_EV_Q_LABEL_LBN 32
+#define	FSF_AZ_TX_EV_Q_LABEL_WIDTH 5
+#define	FSF_AZ_TX_EV_PORT_LBN 16
+#define	FSF_AZ_TX_EV_PORT_WIDTH 1
+#define	FSF_AZ_TX_EV_WQ_FF_FULL_LBN 15
+#define	FSF_AZ_TX_EV_WQ_FF_FULL_WIDTH 1
+#define	FSF_AZ_TX_EV_BUF_OWNER_ID_ERR_LBN 14
+#define	FSF_AZ_TX_EV_BUF_OWNER_ID_ERR_WIDTH 1
+#define	FSF_AZ_TX_EV_COMP_LBN 12
+#define	FSF_AZ_TX_EV_COMP_WIDTH 1
+#define	FSF_AZ_TX_EV_DESC_PTR_LBN 0
+#define	FSF_AZ_TX_EV_DESC_PTR_WIDTH 12
+
+/* TX_KER_DESC */
+#define	FSF_AZ_TX_KER_CONT_LBN 62
+#define	FSF_AZ_TX_KER_CONT_WIDTH 1
+#define	FSF_AZ_TX_KER_BYTE_COUNT_LBN 48
+#define	FSF_AZ_TX_KER_BYTE_COUNT_WIDTH 14
+#define	FSF_AZ_TX_KER_BUF_REGION_LBN 46
+#define	FSF_AZ_TX_KER_BUF_REGION_WIDTH 2
+#define	FSF_AZ_TX_KER_BUF_ADDR_LBN 0
+#define	FSF_AZ_TX_KER_BUF_ADDR_WIDTH 46
+
+/* TX_USER_DESC */
+#define	FSF_AZ_TX_USER_SW_EV_EN_LBN 48
+#define	FSF_AZ_TX_USER_SW_EV_EN_WIDTH 1
+#define	FSF_AZ_TX_USER_CONT_LBN 46
+#define	FSF_AZ_TX_USER_CONT_WIDTH 1
+#define	FSF_AZ_TX_USER_BYTE_CNT_LBN 33
+#define	FSF_AZ_TX_USER_BYTE_CNT_WIDTH 13
+#define	FSF_AZ_TX_USER_BUF_ID_LBN 13
+#define	FSF_AZ_TX_USER_BUF_ID_WIDTH 20
+#define	FSF_AZ_TX_USER_BYTE_OFS_LBN 0
+#define	FSF_AZ_TX_USER_BYTE_OFS_WIDTH 13
+
+/* USER_EV */
+#define	FSF_CZ_USER_QID_LBN 32
+#define	FSF_CZ_USER_QID_WIDTH 10
+#define	FSF_CZ_USER_EV_REG_VALUE_LBN 0
+#define	FSF_CZ_USER_EV_REG_VALUE_WIDTH 32
+
+/**************************************************************************
+ *
+ * Falcon B0 PCIe core indirect registers
+ *
+ **************************************************************************
+ */
+
+#define FPCR_BB_PCIE_DEVICE_CTRL_STAT 0x68
+
+#define FPCR_BB_PCIE_LINK_CTRL_STAT 0x70
+
+#define FPCR_BB_ACK_RPL_TIMER 0x700
+#define FPCRF_BB_ACK_TL_LBN 0
+#define FPCRF_BB_ACK_TL_WIDTH 16
+#define FPCRF_BB_RPL_TL_LBN 16
+#define FPCRF_BB_RPL_TL_WIDTH 16
+
+#define FPCR_BB_ACK_FREQ 0x70C
+#define FPCRF_BB_ACK_FREQ_LBN 0
+#define FPCRF_BB_ACK_FREQ_WIDTH 7
+
+/**************************************************************************
+ *
+ * Pseudo-registers and fields
+ *
+ **************************************************************************
+ */
+
+/* Interrupt acknowledge work-around register (A0/A1 only) */
+#define FR_AA_WORK_AROUND_BROKEN_PCI_READS 0x0070
+
+/* EE_SPI_HCMD_REG: SPI host command register */
+/* Values for the EE_SPI_HCMD_SF_SEL register field */
+#define FFE_AB_SPI_DEVICE_EEPROM 0
+#define FFE_AB_SPI_DEVICE_FLASH 1
+
+/* NIC_STAT_REG: NIC status register */
+#define FRF_AB_STRAP_10G_LBN 2
+#define FRF_AB_STRAP_10G_WIDTH 1
+#define FRF_AA_STRAP_PCIE_LBN 0
+#define FRF_AA_STRAP_PCIE_WIDTH 1
+
+/* FATAL_INTR_REG_KER: Fatal interrupt register for Kernel */
+#define FRF_AZ_FATAL_INTR_LBN 0
+#define FRF_AZ_FATAL_INTR_WIDTH 12
+
+/* SRM_CFG_REG: SRAM configuration register */
+/* We treat the number of SRAM banks and bank size as a single field */
+#define	FRF_AZ_SRM_NB_SZ_LBN FRF_AZ_SRM_BANK_SIZE_LBN
+#define	FRF_AZ_SRM_NB_SZ_WIDTH \
+	(FRF_AZ_SRM_BANK_SIZE_WIDTH + FRF_AZ_SRM_NUM_BANK_WIDTH)
+#define FFE_AB_SRM_NB1_SZ2M 0
+#define FFE_AB_SRM_NB1_SZ4M 1
+#define FFE_AB_SRM_NB1_SZ8M 2
+#define FFE_AB_SRM_NB_SZ_DEF 3
+#define FFE_AB_SRM_NB2_SZ4M 4
+#define FFE_AB_SRM_NB2_SZ8M 5
+#define FFE_AB_SRM_NB2_SZ16M 6
+#define FFE_AB_SRM_NB_SZ_RES 7
+
+/* RX_DESC_UPD_REGP0: Receive descriptor update register. */
+/* We write just the last dword of these registers */
+#define	FR_AZ_RX_DESC_UPD_DWORD_P0 \
+	(BUILD_BUG_ON_ZERO(FR_AA_RX_DESC_UPD_KER != FR_BZ_RX_DESC_UPD_P0) + \
+	 FR_BZ_RX_DESC_UPD_P0 + 3 * 4)
+#define	FRF_AZ_RX_DESC_WPTR_DWORD_LBN (FRF_AZ_RX_DESC_WPTR_LBN - 3 * 32)
+#define	FRF_AZ_RX_DESC_WPTR_DWORD_WIDTH FRF_AZ_RX_DESC_WPTR_WIDTH
+
+/* TX_DESC_UPD_REGP0: Transmit descriptor update register. */
+#define FR_AZ_TX_DESC_UPD_DWORD_P0 \
+	(BUILD_BUG_ON_ZERO(FR_AA_TX_DESC_UPD_KER != FR_BZ_TX_DESC_UPD_P0) + \
+	 FR_BZ_TX_DESC_UPD_P0 + 3 * 4)
+#define	FRF_AZ_TX_DESC_WPTR_DWORD_LBN (FRF_AZ_TX_DESC_WPTR_LBN - 3 * 32)
+#define	FRF_AZ_TX_DESC_WPTR_DWORD_WIDTH FRF_AZ_TX_DESC_WPTR_WIDTH
+
+/* GMF_CFG4_REG: GMAC FIFO configuration register 4 */
+#define FRF_AB_GMF_HSTFLTRFRM_PAUSE_LBN 12
+#define FRF_AB_GMF_HSTFLTRFRM_PAUSE_WIDTH 1
+
+/* GMF_CFG5_REG: GMAC FIFO configuration register 5 */
+#define FRF_AB_GMF_HSTFLTRFRMDC_PAUSE_LBN 12
+#define FRF_AB_GMF_HSTFLTRFRMDC_PAUSE_WIDTH 1
+
+/* XM_TX_PARAM_REG: XGMAC transmit parameter register */
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_LBN FRF_AB_XM_MAX_TX_FRM_SIZE_LO_LBN
+#define	FRF_AB_XM_MAX_TX_FRM_SIZE_WIDTH (FRF_AB_XM_MAX_TX_FRM_SIZE_HI_WIDTH + \
+					 FRF_AB_XM_MAX_TX_FRM_SIZE_LO_WIDTH)
+
+/* XM_RX_PARAM_REG: XGMAC receive parameter register */
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_LBN FRF_AB_XM_MAX_RX_FRM_SIZE_LO_LBN
+#define	FRF_AB_XM_MAX_RX_FRM_SIZE_WIDTH (FRF_AB_XM_MAX_RX_FRM_SIZE_HI_WIDTH + \
+					 FRF_AB_XM_MAX_RX_FRM_SIZE_LO_WIDTH)
+
+/* XX_TXDRV_CTL_REG: XAUI SerDes transmit drive control register */
+/* Default values */
+#define FFE_AB_XX_TXDRV_DEQ_DEF 0xe /* deq=.6 */
+#define FFE_AB_XX_TXDRV_DTX_DEF 0x5 /* 1.25 */
+#define FFE_AB_XX_SD_CTL_DRV_DEF 0  /* 20mA */
+
+/* XX_CORE_STAT_REG: XAUI XGXS core status register */
+/* XGXS all-lanes status fields */
+#define	FRF_AB_XX_SYNC_STAT_LBN FRF_AB_XX_SYNC_STAT0_LBN
+#define	FRF_AB_XX_SYNC_STAT_WIDTH 4
+#define	FRF_AB_XX_COMMA_DET_LBN FRF_AB_XX_COMMA_DET_CH0_LBN
+#define	FRF_AB_XX_COMMA_DET_WIDTH 4
+#define	FRF_AB_XX_CHAR_ERR_LBN FRF_AB_XX_CHAR_ERR_CH0_LBN
+#define	FRF_AB_XX_CHAR_ERR_WIDTH 4
+#define	FRF_AB_XX_DISPERR_LBN FRF_AB_XX_DISPERR_CH0_LBN
+#define	FRF_AB_XX_DISPERR_WIDTH 4
+#define	FFE_AB_XX_STAT_ALL_LANES 0xf
+#define	FRF_AB_XX_FORCE_SIG_LBN FRF_AB_XX_FORCE_SIG0_VAL_LBN
+#define	FRF_AB_XX_FORCE_SIG_WIDTH 8
+#define	FFE_AB_XX_FORCE_SIG_ALL_LANES 0xff
+
+/* DRIVER_EV */
+/* Sub-fields of an RX flush completion event */
+#define FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL_LBN 12
+#define FSF_AZ_DRIVER_EV_RX_FLUSH_FAIL_WIDTH 1
+#define FSF_AZ_DRIVER_EV_RX_DESCQ_ID_LBN 0
+#define FSF_AZ_DRIVER_EV_RX_DESCQ_ID_WIDTH 12
+
+/* EVENT_ENTRY */
+/* Magic number field for event test */
+#define FSF_AZ_DRV_GEN_EV_MAGIC_LBN 0
+#define FSF_AZ_DRV_GEN_EV_MAGIC_WIDTH 32
+
+/**************************************************************************
+ *
+ * Falcon MAC stats
+ *
+ **************************************************************************
+ *
+ */
+
+#define GRxGoodOct_offset 0x0
+#define GRxGoodOct_WIDTH 48
+#define GRxBadOct_offset 0x8
+#define GRxBadOct_WIDTH 48
+#define GRxMissPkt_offset 0x10
+#define GRxMissPkt_WIDTH 32
+#define GRxFalseCRS_offset 0x14
+#define GRxFalseCRS_WIDTH 32
+#define GRxPausePkt_offset 0x18
+#define GRxPausePkt_WIDTH 32
+#define GRxBadPkt_offset 0x1C
+#define GRxBadPkt_WIDTH 32
+#define GRxUcastPkt_offset 0x20
+#define GRxUcastPkt_WIDTH 32
+#define GRxMcastPkt_offset 0x24
+#define GRxMcastPkt_WIDTH 32
+#define GRxBcastPkt_offset 0x28
+#define GRxBcastPkt_WIDTH 32
+#define GRxGoodLt64Pkt_offset 0x2C
+#define GRxGoodLt64Pkt_WIDTH 32
+#define GRxBadLt64Pkt_offset 0x30
+#define GRxBadLt64Pkt_WIDTH 32
+#define GRx64Pkt_offset 0x34
+#define GRx64Pkt_WIDTH 32
+#define GRx65to127Pkt_offset 0x38
+#define GRx65to127Pkt_WIDTH 32
+#define GRx128to255Pkt_offset 0x3C
+#define GRx128to255Pkt_WIDTH 32
+#define GRx256to511Pkt_offset 0x40
+#define GRx256to511Pkt_WIDTH 32
+#define GRx512to1023Pkt_offset 0x44
+#define GRx512to1023Pkt_WIDTH 32
+#define GRx1024to15xxPkt_offset 0x48
+#define GRx1024to15xxPkt_WIDTH 32
+#define GRx15xxtoJumboPkt_offset 0x4C
+#define GRx15xxtoJumboPkt_WIDTH 32
+#define GRxGtJumboPkt_offset 0x50
+#define GRxGtJumboPkt_WIDTH 32
+#define GRxFcsErr64to15xxPkt_offset 0x54
+#define GRxFcsErr64to15xxPkt_WIDTH 32
+#define GRxFcsErr15xxtoJumboPkt_offset 0x58
+#define GRxFcsErr15xxtoJumboPkt_WIDTH 32
+#define GRxFcsErrGtJumboPkt_offset 0x5C
+#define GRxFcsErrGtJumboPkt_WIDTH 32
+#define GTxGoodBadOct_offset 0x80
+#define GTxGoodBadOct_WIDTH 48
+#define GTxGoodOct_offset 0x88
+#define GTxGoodOct_WIDTH 48
+#define GTxSglColPkt_offset 0x90
+#define GTxSglColPkt_WIDTH 32
+#define GTxMultColPkt_offset 0x94
+#define GTxMultColPkt_WIDTH 32
+#define GTxExColPkt_offset 0x98
+#define GTxExColPkt_WIDTH 32
+#define GTxDefPkt_offset 0x9C
+#define GTxDefPkt_WIDTH 32
+#define GTxLateCol_offset 0xA0
+#define GTxLateCol_WIDTH 32
+#define GTxExDefPkt_offset 0xA4
+#define GTxExDefPkt_WIDTH 32
+#define GTxPausePkt_offset 0xA8
+#define GTxPausePkt_WIDTH 32
+#define GTxBadPkt_offset 0xAC
+#define GTxBadPkt_WIDTH 32
+#define GTxUcastPkt_offset 0xB0
+#define GTxUcastPkt_WIDTH 32
+#define GTxMcastPkt_offset 0xB4
+#define GTxMcastPkt_WIDTH 32
+#define GTxBcastPkt_offset 0xB8
+#define GTxBcastPkt_WIDTH 32
+#define GTxLt64Pkt_offset 0xBC
+#define GTxLt64Pkt_WIDTH 32
+#define GTx64Pkt_offset 0xC0
+#define GTx64Pkt_WIDTH 32
+#define GTx65to127Pkt_offset 0xC4
+#define GTx65to127Pkt_WIDTH 32
+#define GTx128to255Pkt_offset 0xC8
+#define GTx128to255Pkt_WIDTH 32
+#define GTx256to511Pkt_offset 0xCC
+#define GTx256to511Pkt_WIDTH 32
+#define GTx512to1023Pkt_offset 0xD0
+#define GTx512to1023Pkt_WIDTH 32
+#define GTx1024to15xxPkt_offset 0xD4
+#define GTx1024to15xxPkt_WIDTH 32
+#define GTx15xxtoJumboPkt_offset 0xD8
+#define GTx15xxtoJumboPkt_WIDTH 32
+#define GTxGtJumboPkt_offset 0xDC
+#define GTxGtJumboPkt_WIDTH 32
+#define GTxNonTcpUdpPkt_offset 0xE0
+#define GTxNonTcpUdpPkt_WIDTH 16
+#define GTxMacSrcErrPkt_offset 0xE4
+#define GTxMacSrcErrPkt_WIDTH 16
+#define GTxIpSrcErrPkt_offset 0xE8
+#define GTxIpSrcErrPkt_WIDTH 16
+#define GDmaDone_offset 0xEC
+#define GDmaDone_WIDTH 32
+
+#define XgRxOctets_offset 0x0
+#define XgRxOctets_WIDTH 48
+#define XgRxOctetsOK_offset 0x8
+#define XgRxOctetsOK_WIDTH 48
+#define XgRxPkts_offset 0x10
+#define XgRxPkts_WIDTH 32
+#define XgRxPktsOK_offset 0x14
+#define XgRxPktsOK_WIDTH 32
+#define XgRxBroadcastPkts_offset 0x18
+#define XgRxBroadcastPkts_WIDTH 32
+#define XgRxMulticastPkts_offset 0x1C
+#define XgRxMulticastPkts_WIDTH 32
+#define XgRxUnicastPkts_offset 0x20
+#define XgRxUnicastPkts_WIDTH 32
+#define XgRxUndersizePkts_offset 0x24
+#define XgRxUndersizePkts_WIDTH 32
+#define XgRxOversizePkts_offset 0x28
+#define XgRxOversizePkts_WIDTH 32
+#define XgRxJabberPkts_offset 0x2C
+#define XgRxJabberPkts_WIDTH 32
+#define XgRxUndersizeFCSerrorPkts_offset 0x30
+#define XgRxUndersizeFCSerrorPkts_WIDTH 32
+#define XgRxDropEvents_offset 0x34
+#define XgRxDropEvents_WIDTH 32
+#define XgRxFCSerrorPkts_offset 0x38
+#define XgRxFCSerrorPkts_WIDTH 32
+#define XgRxAlignError_offset 0x3C
+#define XgRxAlignError_WIDTH 32
+#define XgRxSymbolError_offset 0x40
+#define XgRxSymbolError_WIDTH 32
+#define XgRxInternalMACError_offset 0x44
+#define XgRxInternalMACError_WIDTH 32
+#define XgRxControlPkts_offset 0x48
+#define XgRxControlPkts_WIDTH 32
+#define XgRxPausePkts_offset 0x4C
+#define XgRxPausePkts_WIDTH 32
+#define XgRxPkts64Octets_offset 0x50
+#define XgRxPkts64Octets_WIDTH 32
+#define XgRxPkts65to127Octets_offset 0x54
+#define XgRxPkts65to127Octets_WIDTH 32
+#define XgRxPkts128to255Octets_offset 0x58
+#define XgRxPkts128to255Octets_WIDTH 32
+#define XgRxPkts256to511Octets_offset 0x5C
+#define XgRxPkts256to511Octets_WIDTH 32
+#define XgRxPkts512to1023Octets_offset 0x60
+#define XgRxPkts512to1023Octets_WIDTH 32
+#define XgRxPkts1024to15xxOctets_offset 0x64
+#define XgRxPkts1024to15xxOctets_WIDTH 32
+#define XgRxPkts15xxtoMaxOctets_offset 0x68
+#define XgRxPkts15xxtoMaxOctets_WIDTH 32
+#define XgRxLengthError_offset 0x6C
+#define XgRxLengthError_WIDTH 32
+#define XgTxPkts_offset 0x80
+#define XgTxPkts_WIDTH 32
+#define XgTxOctets_offset 0x88
+#define XgTxOctets_WIDTH 48
+#define XgTxMulticastPkts_offset 0x90
+#define XgTxMulticastPkts_WIDTH 32
+#define XgTxBroadcastPkts_offset 0x94
+#define XgTxBroadcastPkts_WIDTH 32
+#define XgTxUnicastPkts_offset 0x98
+#define XgTxUnicastPkts_WIDTH 32
+#define XgTxControlPkts_offset 0x9C
+#define XgTxControlPkts_WIDTH 32
+#define XgTxPausePkts_offset 0xA0
+#define XgTxPausePkts_WIDTH 32
+#define XgTxPkts64Octets_offset 0xA4
+#define XgTxPkts64Octets_WIDTH 32
+#define XgTxPkts65to127Octets_offset 0xA8
+#define XgTxPkts65to127Octets_WIDTH 32
+#define XgTxPkts128to255Octets_offset 0xAC
+#define XgTxPkts128to255Octets_WIDTH 32
+#define XgTxPkts256to511Octets_offset 0xB0
+#define XgTxPkts256to511Octets_WIDTH 32
+#define XgTxPkts512to1023Octets_offset 0xB4
+#define XgTxPkts512to1023Octets_WIDTH 32
+#define XgTxPkts1024to15xxOctets_offset 0xB8
+#define XgTxPkts1024to15xxOctets_WIDTH 32
+#define XgTxPkts1519toMaxOctets_offset 0xBC
+#define XgTxPkts1519toMaxOctets_WIDTH 32
+#define XgTxUndersizePkts_offset 0xC0
+#define XgTxUndersizePkts_WIDTH 32
+#define XgTxOversizePkts_offset 0xC4
+#define XgTxOversizePkts_WIDTH 32
+#define XgTxNonTcpUdpPkt_offset 0xC8
+#define XgTxNonTcpUdpPkt_WIDTH 16
+#define XgTxMacSrcErrPkt_offset 0xCC
+#define XgTxMacSrcErrPkt_WIDTH 16
+#define XgTxIpSrcErrPkt_offset 0xD0
+#define XgTxIpSrcErrPkt_WIDTH 16
+#define XgDmaDone_offset 0xD4
+#define XgDmaDone_WIDTH 32
+
+#define FALCON_STATS_NOT_DONE 0x00000000
+#define FALCON_STATS_DONE 0xffffffff
+
+/* Interrupt status register bits */
+#define FATAL_INT_LBN 64
+#define FATAL_INT_WIDTH 1
+#define INT_EVQS_LBN 40
+#define INT_EVQS_WIDTH 4
+#define INT_FLAG_LBN 32
+#define INT_FLAG_WIDTH 1
+#define EVQ_FIFO_HF_LBN 1
+#define EVQ_FIFO_HF_WIDTH 1
+#define EVQ_FIFO_AF_LBN 0
+#define EVQ_FIFO_AF_WIDTH 1
+
+/**************************************************************************
+ *
+ * Falcon non-volatile configuration
+ *
+ **************************************************************************
+ */
+
+/* Board configuration v2 (v1 is obsolete; later versions are compatible) */
+struct falcon_nvconfig_board_v2 {
+	__le16 nports;
+	u8 port0_phy_addr;
+	u8 port0_phy_type;
+	u8 port1_phy_addr;
+	u8 port1_phy_type;
+	__le16 asic_sub_revision;
+	__le16 board_revision;
+} __packed;
+
+/* Board configuration v3 extra information */
+struct falcon_nvconfig_board_v3 {
+	__le32 spi_device_type[2];
+} __packed;
+
+/* Bit numbers for spi_device_type */
+#define SPI_DEV_TYPE_SIZE_LBN 0
+#define SPI_DEV_TYPE_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_ADDR_LEN_LBN 6
+#define SPI_DEV_TYPE_ADDR_LEN_WIDTH 2
+#define SPI_DEV_TYPE_ERASE_CMD_LBN 8
+#define SPI_DEV_TYPE_ERASE_CMD_WIDTH 8
+#define SPI_DEV_TYPE_ERASE_SIZE_LBN 16
+#define SPI_DEV_TYPE_ERASE_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_BLOCK_SIZE_LBN 24
+#define SPI_DEV_TYPE_BLOCK_SIZE_WIDTH 5
+#define SPI_DEV_TYPE_FIELD(type, field)					\
+	(((type) >> EFX_LOW_BIT(field)) & EFX_MASK32(EFX_WIDTH(field)))
+
+#define FALCON_NVCONFIG_OFFSET 0x300
+
+#define FALCON_NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
+struct falcon_nvconfig {
+	efx_oword_t ee_vpd_cfg_reg;			/* 0x300 */
+	u8 mac_address[2][8];			/* 0x310 */
+	efx_oword_t pcie_sd_ctl0123_reg;		/* 0x320 */
+	efx_oword_t pcie_sd_ctl45_reg;			/* 0x330 */
+	efx_oword_t pcie_pcs_ctl_stat_reg;		/* 0x340 */
+	efx_oword_t hw_init_reg;			/* 0x350 */
+	efx_oword_t nic_stat_reg;			/* 0x360 */
+	efx_oword_t glb_ctl_reg;			/* 0x370 */
+	efx_oword_t srm_cfg_reg;			/* 0x380 */
+	efx_oword_t spare_reg;				/* 0x390 */
+	__le16 board_magic_num;			/* 0x3A0 */
+	__le16 board_struct_ver;
+	__le16 board_checksum;
+	struct falcon_nvconfig_board_v2 board_v2;
+	efx_oword_t ee_base_page_reg;			/* 0x3B0 */
+	struct falcon_nvconfig_board_v3 board_v3;	/* 0x3C0 */
+} __packed;
+
+#endif /* EFX_REGS_H */
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 98bff5a..a60c718 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -61,7 +61,7 @@
  *   rx_alloc_method = (rx_alloc_level > RX_ALLOC_LEVEL_LRO ?
  *                      RX_ALLOC_METHOD_PAGE : RX_ALLOC_METHOD_SKB)
  */
-static int rx_alloc_method = RX_ALLOC_METHOD_PAGE;
+static int rx_alloc_method = RX_ALLOC_METHOD_AUTO;
 
 #define RX_ALLOC_LEVEL_LRO 0x2000
 #define RX_ALLOC_LEVEL_MAX 0x3000
@@ -293,8 +293,7 @@
 	 * fill anyway.
 	 */
 	fill_level = (rx_queue->added_count - rx_queue->removed_count);
-	EFX_BUG_ON_PARANOID(fill_level >
-			    rx_queue->efx->type->rxd_ring_mask + 1);
+	EFX_BUG_ON_PARANOID(fill_level > EFX_RXQ_SIZE);
 
 	/* Don't fill if we don't need to */
 	if (fill_level >= rx_queue->fast_fill_trigger)
@@ -316,8 +315,7 @@
  retry:
 	/* Recalculate current fill level now that we have the lock */
 	fill_level = (rx_queue->added_count - rx_queue->removed_count);
-	EFX_BUG_ON_PARANOID(fill_level >
-			    rx_queue->efx->type->rxd_ring_mask + 1);
+	EFX_BUG_ON_PARANOID(fill_level > EFX_RXQ_SIZE);
 	space = rx_queue->fast_fill_limit - fill_level;
 	if (space < EFX_RX_BATCH)
 		goto out_unlock;
@@ -329,8 +327,7 @@
 
 	do {
 		for (i = 0; i < EFX_RX_BATCH; ++i) {
-			index = (rx_queue->added_count &
-				 rx_queue->efx->type->rxd_ring_mask);
+			index = rx_queue->added_count & EFX_RXQ_MASK;
 			rx_buf = efx_rx_buffer(rx_queue, index);
 			rc = efx_init_rx_buffer(rx_queue, rx_buf);
 			if (unlikely(rc))
@@ -448,6 +445,7 @@
 			      bool checksummed)
 {
 	struct napi_struct *napi = &channel->napi_str;
+	gro_result_t gro_result;
 
 	/* Pass the skb/page into the LRO engine */
 	if (rx_buf->page) {
@@ -455,6 +453,7 @@
 
 		if (!skb) {
 			put_page(rx_buf->page);
+			gro_result = GRO_DROP;
 			goto out;
 		}
 
@@ -470,7 +469,7 @@
 		skb->ip_summed =
 			checksummed ? CHECKSUM_UNNECESSARY : CHECKSUM_NONE;
 
-		napi_gro_frags(napi);
+		gro_result = napi_gro_frags(napi);
 
 out:
 		EFX_BUG_ON_PARANOID(rx_buf->skb);
@@ -479,9 +478,16 @@
 		EFX_BUG_ON_PARANOID(!rx_buf->skb);
 		EFX_BUG_ON_PARANOID(!checksummed);
 
-		napi_gro_receive(napi, rx_buf->skb);
+		gro_result = napi_gro_receive(napi, rx_buf->skb);
 		rx_buf->skb = NULL;
 	}
+
+	if (gro_result == GRO_NORMAL) {
+		channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
+	} else if (gro_result != GRO_DROP) {
+		channel->rx_alloc_level += RX_ALLOC_FACTOR_LRO;
+		channel->irq_mod_score += 2;
+	}
 }
 
 void efx_rx_packet(struct efx_rx_queue *rx_queue, unsigned int index,
@@ -632,7 +638,7 @@
 	EFX_LOG(efx, "creating RX queue %d\n", rx_queue->queue);
 
 	/* Allocate RX buffers */
-	rxq_size = (efx->type->rxd_ring_mask + 1) * sizeof(*rx_queue->buffer);
+	rxq_size = EFX_RXQ_SIZE * sizeof(*rx_queue->buffer);
 	rx_queue->buffer = kzalloc(rxq_size, GFP_KERNEL);
 	if (!rx_queue->buffer)
 		return -ENOMEM;
@@ -647,7 +653,6 @@
 
 void efx_init_rx_queue(struct efx_rx_queue *rx_queue)
 {
-	struct efx_nic *efx = rx_queue->efx;
 	unsigned int max_fill, trigger, limit;
 
 	EFX_LOG(rx_queue->efx, "initialising RX queue %d\n", rx_queue->queue);
@@ -660,7 +665,7 @@
 	rx_queue->min_overfill = -1U;
 
 	/* Initialise limit fields */
-	max_fill = efx->type->rxd_ring_mask + 1 - EFX_RXD_HEAD_ROOM;
+	max_fill = EFX_RXQ_SIZE - EFX_RXD_HEAD_ROOM;
 	trigger = max_fill * min(rx_refill_threshold, 100U) / 100U;
 	limit = max_fill * min(rx_refill_limit, 100U) / 100U;
 
@@ -683,7 +688,7 @@
 
 	/* Release RX buffers NB start at index 0 not current HW ptr */
 	if (rx_queue->buffer) {
-		for (i = 0; i <= rx_queue->efx->type->rxd_ring_mask; i++) {
+		for (i = 0; i <= EFX_RXQ_MASK; i++) {
 			rx_buf = efx_rx_buffer(rx_queue, i);
 			efx_fini_rx_buffer(rx_queue, rx_buf);
 		}
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
index 817c7ef..7a9386f 100644
--- a/drivers/net/sfc/selftest.c
+++ b/drivers/net/sfc/selftest.c
@@ -24,10 +24,9 @@
 #include "efx.h"
 #include "falcon.h"
 #include "selftest.h"
-#include "boards.h"
 #include "workarounds.h"
 #include "spi.h"
-#include "falcon_io.h"
+#include "io.h"
 #include "mdio_10g.h"
 
 /*
@@ -527,7 +526,7 @@
 
 	for (i = 0; i < 3; i++) {
 		/* Determine how many packets to send */
-		state->packet_count = (efx->type->txd_ring_mask + 1) / 3;
+		state->packet_count = EFX_TXQ_SIZE / 3;
 		state->packet_count = min(1 << (i << 2), state->packet_count);
 		state->skbs = kzalloc(sizeof(state->skbs[0]) *
 				      state->packet_count, GFP_KERNEL);
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
deleted file mode 100644
index cee00ad..0000000
--- a/drivers/net/sfc/sfe4001.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/****************************************************************************
- * Driver for Solarflare Solarstorm network controllers and boards
- * Copyright 2007-2008 Solarflare Communications Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation, incorporated herein by reference.
- */
-
-/*****************************************************************************
- * Support for the SFE4001 and SFN4111T NICs.
- *
- * The SFE4001 does not power-up fully at reset due to its high power
- * consumption.  We control its power via a PCA9539 I/O expander.
- * Both boards have a MAX6647 temperature monitor which we expose to
- * the lm90 driver.
- *
- * This also provides minimal support for reflashing the PHY, which is
- * initiated by resetting it with the FLASH_CFG_1 pin pulled down.
- * On SFE4001 rev A2 and later this is connected to the 3V3X output of
- * the IO-expander; on the SFN4111T it is connected to Falcon's GPIO3.
- * We represent reflash mode as PHY_MODE_SPECIAL and make it mutually
- * exclusive with the network device being open.
- */
-
-#include <linux/delay.h>
-#include <linux/rtnetlink.h>
-#include "net_driver.h"
-#include "efx.h"
-#include "phy.h"
-#include "boards.h"
-#include "falcon.h"
-#include "falcon_hwdefs.h"
-#include "falcon_io.h"
-#include "mac.h"
-#include "workarounds.h"
-
-/**************************************************************************
- *
- * I2C IO Expander device
- *
- **************************************************************************/
-#define	PCA9539 0x74
-
-#define	P0_IN 0x00
-#define	P0_OUT 0x02
-#define	P0_INVERT 0x04
-#define	P0_CONFIG 0x06
-
-#define	P0_EN_1V0X_LBN 0
-#define	P0_EN_1V0X_WIDTH 1
-#define	P0_EN_1V2_LBN 1
-#define	P0_EN_1V2_WIDTH 1
-#define	P0_EN_2V5_LBN 2
-#define	P0_EN_2V5_WIDTH 1
-#define	P0_EN_3V3X_LBN 3
-#define	P0_EN_3V3X_WIDTH 1
-#define	P0_EN_5V_LBN 4
-#define	P0_EN_5V_WIDTH 1
-#define	P0_SHORTEN_JTAG_LBN 5
-#define	P0_SHORTEN_JTAG_WIDTH 1
-#define	P0_X_TRST_LBN 6
-#define	P0_X_TRST_WIDTH 1
-#define	P0_DSP_RESET_LBN 7
-#define	P0_DSP_RESET_WIDTH 1
-
-#define	P1_IN 0x01
-#define	P1_OUT 0x03
-#define	P1_INVERT 0x05
-#define	P1_CONFIG 0x07
-
-#define	P1_AFE_PWD_LBN 0
-#define	P1_AFE_PWD_WIDTH 1
-#define	P1_DSP_PWD25_LBN 1
-#define	P1_DSP_PWD25_WIDTH 1
-#define	P1_RESERVED_LBN 2
-#define	P1_RESERVED_WIDTH 2
-#define	P1_SPARE_LBN 4
-#define	P1_SPARE_WIDTH 4
-
-/* Temperature Sensor */
-#define MAX664X_REG_RSL		0x02
-#define MAX664X_REG_WLHO	0x0B
-
-static void sfe4001_poweroff(struct efx_nic *efx)
-{
-	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
-	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
-
-	/* Turn off all power rails and disable outputs */
-	i2c_smbus_write_byte_data(ioexp_client, P0_OUT, 0xff);
-	i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG, 0xff);
-	i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0xff);
-
-	/* Clear any over-temperature alert */
-	i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
-}
-
-static int sfe4001_poweron(struct efx_nic *efx)
-{
-	struct i2c_client *hwmon_client = efx->board_info.hwmon_client;
-	struct i2c_client *ioexp_client = efx->board_info.ioexp_client;
-	unsigned int i, j;
-	int rc;
-	u8 out;
-
-	/* Clear any previous over-temperature alert */
-	rc = i2c_smbus_read_byte_data(hwmon_client, MAX664X_REG_RSL);
-	if (rc < 0)
-		return rc;
-
-	/* Enable port 0 and port 1 outputs on IO expander */
-	rc = i2c_smbus_write_byte_data(ioexp_client, P0_CONFIG, 0x00);
-	if (rc)
-		return rc;
-	rc = i2c_smbus_write_byte_data(ioexp_client, P1_CONFIG,
-				       0xff & ~(1 << P1_SPARE_LBN));
-	if (rc)
-		goto fail_on;
-
-	/* If PHY power is on, turn it all off and wait 1 second to
-	 * ensure a full reset.
-	 */
-	rc = i2c_smbus_read_byte_data(ioexp_client, P0_OUT);
-	if (rc < 0)
-		goto fail_on;
-	out = 0xff & ~((0 << P0_EN_1V2_LBN) | (0 << P0_EN_2V5_LBN) |
-		       (0 << P0_EN_3V3X_LBN) | (0 << P0_EN_5V_LBN) |
-		       (0 << P0_EN_1V0X_LBN));
-	if (rc != out) {
-		EFX_INFO(efx, "power-cycling PHY\n");
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-		schedule_timeout_uninterruptible(HZ);
-	}
-
-	for (i = 0; i < 20; ++i) {
-		/* Turn on 1.2V, 2.5V, 3.3V and 5V power rails */
-		out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
-			       (1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
-			       (1 << P0_X_TRST_LBN));
-		if (efx->phy_mode & PHY_MODE_SPECIAL)
-			out |= 1 << P0_EN_3V3X_LBN;
-
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-		msleep(10);
-
-		/* Turn on 1V power rail */
-		out &= ~(1 << P0_EN_1V0X_LBN);
-		rc = i2c_smbus_write_byte_data(ioexp_client, P0_OUT, out);
-		if (rc)
-			goto fail_on;
-
-		EFX_INFO(efx, "waiting for DSP boot (attempt %d)...\n", i);
-
-		/* In flash config mode, DSP does not turn on AFE, so
-		 * just wait 1 second.
-		 */
-		if (efx->phy_mode & PHY_MODE_SPECIAL) {
-			schedule_timeout_uninterruptible(HZ);
-			return 0;
-		}
-
-		for (j = 0; j < 10; ++j) {
-			msleep(100);
-
-			/* Check DSP has asserted AFE power line */
-			rc = i2c_smbus_read_byte_data(ioexp_client, P1_IN);
-			if (rc < 0)
-				goto fail_on;
-			if (rc & (1 << P1_AFE_PWD_LBN))
-				return 0;
-		}
-	}
-
-	EFX_INFO(efx, "timed out waiting for DSP boot\n");
-	rc = -ETIMEDOUT;
-fail_on:
-	sfe4001_poweroff(efx);
-	return rc;
-}
-
-static int sfn4111t_reset(struct efx_nic *efx)
-{
-	efx_oword_t reg;
-
-	/* GPIO 3 and the GPIO register are shared with I2C, so block that */
-	mutex_lock(&efx->i2c_adap.bus_lock);
-
-	/* Pull RST_N (GPIO 2) low then let it up again, setting the
-	 * FLASH_CFG_1 strap (GPIO 3) appropriately.  Only change the
-	 * output enables; the output levels should always be 0 (low)
-	 * and we rely on external pull-ups. */
-	falcon_read(efx, &reg, GPIO_CTL_REG_KER);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, true);
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
-	msleep(1000);
-	EFX_SET_OWORD_FIELD(reg, GPIO2_OEN, false);
-	EFX_SET_OWORD_FIELD(reg, GPIO3_OEN,
-			    !!(efx->phy_mode & PHY_MODE_SPECIAL));
-	falcon_write(efx, &reg, GPIO_CTL_REG_KER);
-	msleep(1);
-
-	mutex_unlock(&efx->i2c_adap.bus_lock);
-
-	ssleep(1);
-	return 0;
-}
-
-static ssize_t show_phy_flash_cfg(struct device *dev,
-				  struct device_attribute *attr, char *buf)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	return sprintf(buf, "%d\n", !!(efx->phy_mode & PHY_MODE_SPECIAL));
-}
-
-static ssize_t set_phy_flash_cfg(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf, size_t count)
-{
-	struct efx_nic *efx = pci_get_drvdata(to_pci_dev(dev));
-	enum efx_phy_mode old_mode, new_mode;
-	int err;
-
-	rtnl_lock();
-	old_mode = efx->phy_mode;
-	if (count == 0 || *buf == '0')
-		new_mode = old_mode & ~PHY_MODE_SPECIAL;
-	else
-		new_mode = PHY_MODE_SPECIAL;
-	if (old_mode == new_mode) {
-		err = 0;
-	} else if (efx->state != STATE_RUNNING || netif_running(efx->net_dev)) {
-		err = -EBUSY;
-	} else {
-		/* Reset the PHY, reconfigure the MAC and enable/disable
-		 * MAC stats accordingly. */
-		efx->phy_mode = new_mode;
-		if (new_mode & PHY_MODE_SPECIAL)
-			efx_stats_disable(efx);
-		if (efx->board_info.type == EFX_BOARD_SFE4001)
-			err = sfe4001_poweron(efx);
-		else
-			err = sfn4111t_reset(efx);
-		efx_reconfigure_port(efx);
-		if (!(new_mode & PHY_MODE_SPECIAL))
-			efx_stats_enable(efx);
-	}
-	rtnl_unlock();
-
-	return err ? err : count;
-}
-
-static DEVICE_ATTR(phy_flash_cfg, 0644, show_phy_flash_cfg, set_phy_flash_cfg);
-
-static void sfe4001_fini(struct efx_nic *efx)
-{
-	EFX_INFO(efx, "%s\n", __func__);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	sfe4001_poweroff(efx);
-	i2c_unregister_device(efx->board_info.ioexp_client);
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static int sfe4001_check_hw(struct efx_nic *efx)
-{
-	s32 status;
-
-	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
-		return 0;
-
-	/* Check the powered status of the PHY. Lack of power implies that
-	 * the MAX6647 has shut down power to it, probably due to a temp.
-	 * alarm. Reading the power status rather than the MAX6647 status
-	 * directly because the later is read-to-clear and would thus
-	 * start to power up the PHY again when polled, causing us to blip
-	 * the power undesirably.
-	 * We know we can read from the IO expander because we did
-	 * it during power-on. Assume failure now is bad news. */
-	status = i2c_smbus_read_byte_data(efx->board_info.ioexp_client, P1_IN);
-	if (status >= 0 &&
-	    (status & ((1 << P1_AFE_PWD_LBN) | (1 << P1_DSP_PWD25_LBN))) != 0)
-		return 0;
-
-	/* Use board power control, not PHY power control */
-	sfe4001_poweroff(efx);
-	efx->phy_mode = PHY_MODE_OFF;
-
-	return (status < 0) ? -EIO : -ERANGE;
-}
-
-static struct i2c_board_info sfe4001_hwmon_info = {
-	I2C_BOARD_INFO("max6647", 0x4e),
-};
-
-/* This board uses an I2C expander to provider power to the PHY, which needs to
- * be turned on before the PHY can be used.
- * Context: Process context, rtnl lock held
- */
-int sfe4001_init(struct efx_nic *efx)
-{
-	int rc;
-
-#if defined(CONFIG_SENSORS_LM90) || defined(CONFIG_SENSORS_LM90_MODULE)
-	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap, &sfe4001_hwmon_info);
-#else
-	efx->board_info.hwmon_client =
-		i2c_new_dummy(&efx->i2c_adap, sfe4001_hwmon_info.addr);
-#endif
-	if (!efx->board_info.hwmon_client)
-		return -EIO;
-
-	/* Raise board/PHY high limit from 85 to 90 degrees Celsius */
-	rc = i2c_smbus_write_byte_data(efx->board_info.hwmon_client,
-				       MAX664X_REG_WLHO, 90);
-	if (rc)
-		goto fail_hwmon;
-
-	efx->board_info.ioexp_client = i2c_new_dummy(&efx->i2c_adap, PCA9539);
-	if (!efx->board_info.ioexp_client) {
-		rc = -EIO;
-		goto fail_hwmon;
-	}
-
-	/* 10Xpress has fixed-function LED pins, so there is no board-specific
-	 * blink code. */
-	efx->board_info.blink = tenxpress_phy_blink;
-
-	efx->board_info.monitor = sfe4001_check_hw;
-	efx->board_info.fini = sfe4001_fini;
-
-	if (efx->phy_mode & PHY_MODE_SPECIAL) {
-		/* PHY won't generate a 156.25 MHz clock and MAC stats fetch
-		 * will fail. */
-		efx_stats_disable(efx);
-	}
-	rc = sfe4001_poweron(efx);
-	if (rc)
-		goto fail_ioexp;
-
-	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	if (rc)
-		goto fail_on;
-
-	EFX_INFO(efx, "PHY is powered on\n");
-	return 0;
-
-fail_on:
-	sfe4001_poweroff(efx);
-fail_ioexp:
-	i2c_unregister_device(efx->board_info.ioexp_client);
-fail_hwmon:
-	i2c_unregister_device(efx->board_info.hwmon_client);
-	return rc;
-}
-
-static int sfn4111t_check_hw(struct efx_nic *efx)
-{
-	s32 status;
-
-	/* If XAUI link is up then do not monitor */
-	if (EFX_WORKAROUND_7884(efx) && efx->mac_up)
-		return 0;
-
-	/* Test LHIGH, RHIGH, FAULT, EOT and IOT alarms */
-	status = i2c_smbus_read_byte_data(efx->board_info.hwmon_client,
-					  MAX664X_REG_RSL);
-	if (status < 0)
-		return -EIO;
-	if (status & 0x57)
-		return -ERANGE;
-	return 0;
-}
-
-static void sfn4111t_fini(struct efx_nic *efx)
-{
-	EFX_INFO(efx, "%s\n", __func__);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	i2c_unregister_device(efx->board_info.hwmon_client);
-}
-
-static struct i2c_board_info sfn4111t_a0_hwmon_info = {
-	I2C_BOARD_INFO("max6647", 0x4e),
-};
-
-static struct i2c_board_info sfn4111t_r5_hwmon_info = {
-	I2C_BOARD_INFO("max6646", 0x4d),
-};
-
-int sfn4111t_init(struct efx_nic *efx)
-{
-	int i = 0;
-	int rc;
-
-	efx->board_info.hwmon_client =
-		i2c_new_device(&efx->i2c_adap,
-			       (efx->board_info.minor < 5) ?
-			       &sfn4111t_a0_hwmon_info :
-			       &sfn4111t_r5_hwmon_info);
-	if (!efx->board_info.hwmon_client)
-		return -EIO;
-
-	efx->board_info.blink = tenxpress_phy_blink;
-	efx->board_info.monitor = sfn4111t_check_hw;
-	efx->board_info.fini = sfn4111t_fini;
-
-	rc = device_create_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-	if (rc)
-		goto fail_hwmon;
-
-	do {
-		if (efx->phy_mode & PHY_MODE_SPECIAL) {
-			/* PHY may not generate a 156.25 MHz clock and MAC
-			 * stats fetch will fail. */
-			efx_stats_disable(efx);
-			sfn4111t_reset(efx);
-		}
-		rc = sft9001_wait_boot(efx);
-		if (rc == 0)
-			return 0;
-		efx->phy_mode = PHY_MODE_SPECIAL;
-	} while (rc == -EINVAL && ++i < 2);
-
-	device_remove_file(&efx->pci_dev->dev, &dev_attr_phy_flash_cfg);
-fail_hwmon:
-	i2c_unregister_device(efx->board_info.hwmon_client);
-	return rc;
-}
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index f4d5090..390b27b 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -14,8 +14,7 @@
 #include "mdio_10g.h"
 #include "falcon.h"
 #include "phy.h"
-#include "falcon_hwdefs.h"
-#include "boards.h"
+#include "regs.h"
 #include "workarounds.h"
 #include "selftest.h"
 
@@ -301,6 +300,7 @@
 static int tenxpress_phy_init(struct efx_nic *efx)
 {
 	struct tenxpress_phy_data *phy_data;
+	u16 old_adv, adv;
 	int rc = 0;
 
 	phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
@@ -333,6 +333,15 @@
 	if (rc < 0)
 		goto fail;
 
+	/* Set pause advertising */
+	old_adv = efx_mdio_read(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE);
+	adv = ((old_adv & ~(ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM)) |
+	       mii_advertise_flowctrl(efx->wanted_fc));
+	if (adv != old_adv) {
+		efx_mdio_write(efx, MDIO_MMD_AN, MDIO_AN_ADVERTISE, adv);
+		mdio45_nway_restart(&efx->mdio);
+	}
+
 	if (efx->phy_type == PHY_TYPE_SFT9001B) {
 		rc = device_create_file(&efx->pci_dev->dev,
 					&dev_attr_phy_short_reach);
@@ -742,6 +751,7 @@
 
 	mdio45_ethtool_gset_npage(&efx->mdio, ecmd, adv, lpa);
 
+	ecmd->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
 	if (efx->phy_type != PHY_TYPE_SFX7101) {
 		ecmd->supported |= (SUPPORTED_100baseT_Full |
 				    SUPPORTED_1000baseT_Full);
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index 489c4de..303919a 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -26,8 +26,7 @@
  * The tx_queue descriptor ring fill-level must fall below this value
  * before we restart the netif queue
  */
-#define EFX_NETDEV_TX_THRESHOLD(_tx_queue)	\
-	(_tx_queue->efx->type->txd_ring_mask / 2u)
+#define EFX_TXQ_THRESHOLD (EFX_TXQ_MASK / 2u)
 
 /* We want to be able to nest calls to netif_stop_queue(), since each
  * channel can have an individual stop on the queue.
@@ -125,6 +124,24 @@
 }
 
 
+static inline unsigned
+efx_max_tx_len(struct efx_nic *efx, dma_addr_t dma_addr)
+{
+	/* Depending on the NIC revision, we can use descriptor
+	 * lengths up to 8K or 8K-1.  However, since PCI Express
+	 * devices must split read requests at 4K boundaries, there is
+	 * little benefit from using descriptors that cross those
+	 * boundaries and we keep things simple by not doing so.
+	 */
+	unsigned len = (~dma_addr & 0xfff) + 1;
+
+	/* Work around hardware bug for unaligned buffers. */
+	if (EFX_WORKAROUND_5391(efx) && (dma_addr & 0xf))
+		len = min_t(unsigned, len, 512 - (dma_addr & 0xf));
+
+	return len;
+}
+
 /*
  * Add a socket buffer to a TX queue
  *
@@ -147,7 +164,7 @@
 	skb_frag_t *fragment;
 	struct page *page;
 	int page_offset;
-	unsigned int len, unmap_len = 0, fill_level, insert_ptr, misalign;
+	unsigned int len, unmap_len = 0, fill_level, insert_ptr;
 	dma_addr_t dma_addr, unmap_addr = 0;
 	unsigned int dma_len;
 	bool unmap_single;
@@ -171,7 +188,7 @@
 	}
 
 	fill_level = tx_queue->insert_count - tx_queue->old_read_count;
-	q_space = efx->type->txd_ring_mask - 1 - fill_level;
+	q_space = EFX_TXQ_MASK - 1 - fill_level;
 
 	/* Map for DMA.  Use pci_map_single rather than pci_map_page
 	 * since this is more efficient on machines with sparse
@@ -208,16 +225,14 @@
 					&tx_queue->read_count;
 				fill_level = (tx_queue->insert_count
 					      - tx_queue->old_read_count);
-				q_space = (efx->type->txd_ring_mask - 1 -
-					   fill_level);
+				q_space = EFX_TXQ_MASK - 1 - fill_level;
 				if (unlikely(q_space-- <= 0))
 					goto stop;
 				smp_mb();
 				--tx_queue->stopped;
 			}
 
-			insert_ptr = (tx_queue->insert_count &
-				      efx->type->txd_ring_mask);
+			insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 			buffer = &tx_queue->buffer[insert_ptr];
 			efx_tsoh_free(tx_queue, buffer);
 			EFX_BUG_ON_PARANOID(buffer->tsoh);
@@ -226,14 +241,10 @@
 			EFX_BUG_ON_PARANOID(!buffer->continuation);
 			EFX_BUG_ON_PARANOID(buffer->unmap_len);
 
-			dma_len = (((~dma_addr) & efx->type->tx_dma_mask) + 1);
-			if (likely(dma_len > len))
+			dma_len = efx_max_tx_len(efx, dma_addr);
+			if (likely(dma_len >= len))
 				dma_len = len;
 
-			misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
-			if (misalign && dma_len + misalign > 512)
-				dma_len = 512 - misalign;
-
 			/* Fill out per descriptor fields */
 			buffer->len = dma_len;
 			buffer->dma_addr = dma_addr;
@@ -289,7 +300,7 @@
 	/* Work backwards until we hit the original insert pointer value */
 	while (tx_queue->insert_count != tx_queue->write_count) {
 		--tx_queue->insert_count;
-		insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+		insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 		buffer = &tx_queue->buffer[insert_ptr];
 		efx_dequeue_buffer(tx_queue, buffer);
 		buffer->len = 0;
@@ -318,10 +329,9 @@
 {
 	struct efx_nic *efx = tx_queue->efx;
 	unsigned int stop_index, read_ptr;
-	unsigned int mask = tx_queue->efx->type->txd_ring_mask;
 
-	stop_index = (index + 1) & mask;
-	read_ptr = tx_queue->read_count & mask;
+	stop_index = (index + 1) & EFX_TXQ_MASK;
+	read_ptr = tx_queue->read_count & EFX_TXQ_MASK;
 
 	while (read_ptr != stop_index) {
 		struct efx_tx_buffer *buffer = &tx_queue->buffer[read_ptr];
@@ -338,7 +348,7 @@
 		buffer->len = 0;
 
 		++tx_queue->read_count;
-		read_ptr = tx_queue->read_count & mask;
+		read_ptr = tx_queue->read_count & EFX_TXQ_MASK;
 	}
 }
 
@@ -391,7 +401,7 @@
 	unsigned fill_level;
 	struct efx_nic *efx = tx_queue->efx;
 
-	EFX_BUG_ON_PARANOID(index > efx->type->txd_ring_mask);
+	EFX_BUG_ON_PARANOID(index > EFX_TXQ_MASK);
 
 	efx_dequeue_buffers(tx_queue, index);
 
@@ -401,7 +411,7 @@
 	smp_mb();
 	if (unlikely(tx_queue->stopped) && likely(efx->port_enabled)) {
 		fill_level = tx_queue->insert_count - tx_queue->read_count;
-		if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
+		if (fill_level < EFX_TXQ_THRESHOLD) {
 			EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
 
 			/* Do this under netif_tx_lock(), to avoid racing
@@ -425,11 +435,11 @@
 	EFX_LOG(efx, "creating TX queue %d\n", tx_queue->queue);
 
 	/* Allocate software ring */
-	txq_size = (efx->type->txd_ring_mask + 1) * sizeof(*tx_queue->buffer);
+	txq_size = EFX_TXQ_SIZE * sizeof(*tx_queue->buffer);
 	tx_queue->buffer = kzalloc(txq_size, GFP_KERNEL);
 	if (!tx_queue->buffer)
 		return -ENOMEM;
-	for (i = 0; i <= efx->type->txd_ring_mask; ++i)
+	for (i = 0; i <= EFX_TXQ_MASK; ++i)
 		tx_queue->buffer[i].continuation = true;
 
 	/* Allocate hardware ring */
@@ -468,8 +478,7 @@
 
 	/* Free any buffers left in the ring */
 	while (tx_queue->read_count != tx_queue->write_count) {
-		buffer = &tx_queue->buffer[tx_queue->read_count &
-					   tx_queue->efx->type->txd_ring_mask];
+		buffer = &tx_queue->buffer[tx_queue->read_count & EFX_TXQ_MASK];
 		efx_dequeue_buffer(tx_queue, buffer);
 		buffer->continuation = true;
 		buffer->len = 0;
@@ -708,14 +717,14 @@
 {
 	struct efx_tx_buffer *buffer;
 	struct efx_nic *efx = tx_queue->efx;
-	unsigned dma_len, fill_level, insert_ptr, misalign;
+	unsigned dma_len, fill_level, insert_ptr;
 	int q_space;
 
 	EFX_BUG_ON_PARANOID(len <= 0);
 
 	fill_level = tx_queue->insert_count - tx_queue->old_read_count;
 	/* -1 as there is no way to represent all descriptors used */
-	q_space = efx->type->txd_ring_mask - 1 - fill_level;
+	q_space = EFX_TXQ_MASK - 1 - fill_level;
 
 	while (1) {
 		if (unlikely(q_space-- <= 0)) {
@@ -731,7 +740,7 @@
 				*(volatile unsigned *)&tx_queue->read_count;
 			fill_level = (tx_queue->insert_count
 				      - tx_queue->old_read_count);
-			q_space = efx->type->txd_ring_mask - 1 - fill_level;
+			q_space = EFX_TXQ_MASK - 1 - fill_level;
 			if (unlikely(q_space-- <= 0)) {
 				*final_buffer = NULL;
 				return 1;
@@ -740,13 +749,13 @@
 			--tx_queue->stopped;
 		}
 
-		insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+		insert_ptr = tx_queue->insert_count & EFX_TXQ_MASK;
 		buffer = &tx_queue->buffer[insert_ptr];
 		++tx_queue->insert_count;
 
 		EFX_BUG_ON_PARANOID(tx_queue->insert_count -
 				    tx_queue->read_count >
-				    efx->type->txd_ring_mask);
+				    EFX_TXQ_MASK);
 
 		efx_tsoh_free(tx_queue, buffer);
 		EFX_BUG_ON_PARANOID(buffer->len);
@@ -757,12 +766,7 @@
 
 		buffer->dma_addr = dma_addr;
 
-		/* Ensure we do not cross a boundary unsupported by H/W */
-		dma_len = (~dma_addr & efx->type->tx_dma_mask) + 1;
-
-		misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
-		if (misalign && dma_len + misalign > 512)
-			dma_len = 512 - misalign;
+		dma_len = efx_max_tx_len(efx, dma_addr);
 
 		/* If there is enough space to send then do so */
 		if (dma_len >= len)
@@ -792,8 +796,7 @@
 {
 	struct efx_tx_buffer *buffer;
 
-	buffer = &tx_queue->buffer[tx_queue->insert_count &
-				   tx_queue->efx->type->txd_ring_mask];
+	buffer = &tx_queue->buffer[tx_queue->insert_count & EFX_TXQ_MASK];
 	efx_tsoh_free(tx_queue, buffer);
 	EFX_BUG_ON_PARANOID(buffer->len);
 	EFX_BUG_ON_PARANOID(buffer->unmap_len);
@@ -818,7 +821,7 @@
 	while (tx_queue->insert_count != tx_queue->write_count) {
 		--tx_queue->insert_count;
 		buffer = &tx_queue->buffer[tx_queue->insert_count &
-					   tx_queue->efx->type->txd_ring_mask];
+					   EFX_TXQ_MASK];
 		efx_tsoh_free(tx_queue, buffer);
 		EFX_BUG_ON_PARANOID(buffer->skb);
 		buffer->len = 0;
@@ -1135,7 +1138,7 @@
 	unsigned i;
 
 	if (tx_queue->buffer) {
-		for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
+		for (i = 0; i <= EFX_TXQ_MASK; ++i)
 			efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
 	}
 
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index c821c15..3250299 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -41,6 +41,8 @@
 
 /* Spurious parity errors in TSORT buffers */
 #define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
+/* Unaligned read request >512 bytes after aligning may break TSORT */
+#define EFX_WORKAROUND_5391 EFX_WORKAROUND_FALCON_A
 /* iSCSI parsing errors */
 #define EFX_WORKAROUND_5583 EFX_WORKAROUND_FALCON_A
 /* RX events go missing */
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index f4dfd1f..6b364a6 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -365,11 +365,10 @@
 					}
 					skb_reserve(newskb, 2);
 				} else {
-					skb = netdev_alloc_skb(dev, len + 2);
-					if (skb) {
-						skb_reserve(skb, 2);
+					skb = netdev_alloc_skb_ip_align(dev, len);
+					if (skb)
 						skb_copy_to_linear_data(skb, rd->skb->data, len);
-					}
+
 					newskb = rd->skb;
 				}
 memory_squeeze:
diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c
index 528b912..5783f50 100644
--- a/drivers/net/sh_eth.c
+++ b/drivers/net/sh_eth.c
@@ -30,6 +30,7 @@
 #include <linux/phy.h>
 #include <linux/cache.h>
 #include <linux/io.h>
+#include <linux/pm_runtime.h>
 #include <asm/cacheflush.h>
 
 #include "sh_eth.h"
@@ -299,16 +300,20 @@
  * When you want use this device, you must set MAC address in bootloader.
  *
  */
-static void read_mac_address(struct net_device *ndev)
+static void read_mac_address(struct net_device *ndev, unsigned char *mac)
 {
 	u32 ioaddr = ndev->base_addr;
 
-	ndev->dev_addr[0] = (ctrl_inl(ioaddr + MAHR) >> 24);
-	ndev->dev_addr[1] = (ctrl_inl(ioaddr + MAHR) >> 16) & 0xFF;
-	ndev->dev_addr[2] = (ctrl_inl(ioaddr + MAHR) >> 8) & 0xFF;
-	ndev->dev_addr[3] = (ctrl_inl(ioaddr + MAHR) & 0xFF);
-	ndev->dev_addr[4] = (ctrl_inl(ioaddr + MALR) >> 8) & 0xFF;
-	ndev->dev_addr[5] = (ctrl_inl(ioaddr + MALR) & 0xFF);
+	if (mac[0] || mac[1] || mac[2] || mac[3] || mac[4] || mac[5]) {
+		memcpy(ndev->dev_addr, mac, 6);
+	} else {
+		ndev->dev_addr[0] = (ctrl_inl(ioaddr + MAHR) >> 24);
+		ndev->dev_addr[1] = (ctrl_inl(ioaddr + MAHR) >> 16) & 0xFF;
+		ndev->dev_addr[2] = (ctrl_inl(ioaddr + MAHR) >> 8) & 0xFF;
+		ndev->dev_addr[3] = (ctrl_inl(ioaddr + MAHR) & 0xFF);
+		ndev->dev_addr[4] = (ctrl_inl(ioaddr + MALR) >> 8) & 0xFF;
+		ndev->dev_addr[5] = (ctrl_inl(ioaddr + MALR) & 0xFF);
+	}
 }
 
 struct bb_info {
@@ -1009,6 +1014,8 @@
 	int ret = 0;
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 
+	pm_runtime_get_sync(&mdp->pdev->dev);
+
 	ret = request_irq(ndev->irq, &sh_eth_interrupt,
 #if defined(CONFIG_CPU_SUBTYPE_SH7763) || defined(CONFIG_CPU_SUBTYPE_SH7764)
 				IRQF_SHARED,
@@ -1045,6 +1052,7 @@
 
 out_free_irq:
 	free_irq(ndev->irq, ndev);
+	pm_runtime_put_sync(&mdp->pdev->dev);
 	return ret;
 }
 
@@ -1176,6 +1184,8 @@
 	ringsize = sizeof(struct sh_eth_txdesc) * TX_RING_SIZE;
 	dma_free_coherent(NULL, ringsize, mdp->tx_ring, mdp->tx_desc_dma);
 
+	pm_runtime_put_sync(&mdp->pdev->dev);
+
 	return 0;
 }
 
@@ -1184,6 +1194,8 @@
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	u32 ioaddr = ndev->base_addr;
 
+	pm_runtime_get_sync(&mdp->pdev->dev);
+
 	mdp->stats.tx_dropped += ctrl_inl(ioaddr + TROCR);
 	ctrl_outl(0, ioaddr + TROCR);	/* (write clear) */
 	mdp->stats.collisions += ctrl_inl(ioaddr + CDCR);
@@ -1199,6 +1211,8 @@
 	mdp->stats.tx_carrier_errors += ctrl_inl(ioaddr + CNDCR);
 	ctrl_outl(0, ioaddr + CNDCR);	/* (write clear) */
 #endif
+	pm_runtime_put_sync(&mdp->pdev->dev);
+
 	return &mdp->stats;
 }
 
@@ -1407,6 +1421,9 @@
 
 	mdp = netdev_priv(ndev);
 	spin_lock_init(&mdp->lock);
+	mdp->pdev = pdev;
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_resume(&pdev->dev);
 
 	pd = (struct sh_eth_plat_data *)(pdev->dev.platform_data);
 	/* get PHY ID */
@@ -1428,7 +1445,7 @@
 	mdp->post_fw = POST_FW >> (devno << 1);
 
 	/* read and set MAC address */
-	read_mac_address(ndev);
+	read_mac_address(ndev, pd->mac_addr);
 
 	/* First device only init */
 	if (!devno) {
@@ -1482,18 +1499,37 @@
 	sh_mdio_release(ndev);
 	unregister_netdev(ndev);
 	flush_scheduled_work();
-
+	pm_runtime_disable(&pdev->dev);
 	free_netdev(ndev);
 	platform_set_drvdata(pdev, NULL);
 
 	return 0;
 }
 
+static int sh_eth_runtime_nop(struct device *dev)
+{
+	/*
+	 * Runtime PM callback shared between ->runtime_suspend()
+	 * and ->runtime_resume(). Simply returns success.
+	 *
+	 * This driver re-initializes all registers after
+	 * pm_runtime_get_sync() anyway so there is no need
+	 * to save and restore registers here.
+	 */
+	return 0;
+}
+
+static struct dev_pm_ops sh_eth_dev_pm_ops = {
+	.runtime_suspend = sh_eth_runtime_nop,
+	.runtime_resume = sh_eth_runtime_nop,
+};
+
 static struct platform_driver sh_eth_driver = {
 	.probe = sh_eth_drv_probe,
 	.remove = sh_eth_drv_remove,
 	.driver = {
 		   .name = CARDNAME,
+		   .pm = &sh_eth_dev_pm_ops,
 	},
 };
 
diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h
index ba151f8..8b47763 100644
--- a/drivers/net/sh_eth.h
+++ b/drivers/net/sh_eth.h
@@ -703,6 +703,7 @@
 };
 
 struct sh_eth_private {
+	struct platform_device *pdev;
 	struct sh_eth_cpu_data *cd;
 	dma_addr_t rx_desc_dma;
 	dma_addr_t tx_desc_dma;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
index 7cc9898..31233b4 100644
--- a/drivers/net/sis190.c
+++ b/drivers/net/sis190.c
@@ -536,13 +536,12 @@
 	if (pkt_size >= rx_copybreak)
 		goto out;
 
-	skb = netdev_alloc_skb(tp->dev, pkt_size + 2);
+	skb = netdev_alloc_skb_ip_align(tp->dev, pkt_size);
 	if (!skb)
 		goto out;
 
 	pci_dma_sync_single_for_cpu(tp->pci_dev, addr, tp->rx_buf_sz,
 				PCI_DMA_FROMDEVICE);
-	skb_reserve(skb, 2);
 	skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
 	*sk_buff = skb;
 	done = true;
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 01f6811..be28ebb 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3070,11 +3070,10 @@
 		goto error;
 
 	if (len < RX_COPY_THRESHOLD) {
-		skb = netdev_alloc_skb(dev, len + 2);
+		skb = netdev_alloc_skb_ip_align(dev, len);
 		if (!skb)
 			goto resubmit;
 
-		skb_reserve(skb, 2);
 		pci_dma_sync_single_for_cpu(skge->hw->pdev,
 					    pci_unmap_addr(e, mapaddr),
 					    len, PCI_DMA_FROMDEVICE);
@@ -3085,11 +3084,11 @@
 		skge_rx_reuse(e, skge->rx_buf_size);
 	} else {
 		struct sk_buff *nskb;
-		nskb = netdev_alloc_skb(dev, skge->rx_buf_size + NET_IP_ALIGN);
+
+		nskb = netdev_alloc_skb_ip_align(dev, skge->rx_buf_size);
 		if (!nskb)
 			goto resubmit;
 
-		skb_reserve(nskb, NET_IP_ALIGN);
 		pci_unmap_single(skge->hw->pdev,
 				 pci_unmap_addr(e, mapaddr),
 				 pci_unmap_len(e, maplen),
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index 6a10d7b..a3d9991 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -50,7 +50,7 @@
 #include "sky2.h"
 
 #define DRV_NAME		"sky2"
-#define DRV_VERSION		"1.25"
+#define DRV_VERSION		"1.26"
 #define PFX			DRV_NAME " "
 
 /*
@@ -102,6 +102,7 @@
 static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */
 	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */
+	{ PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E01) }, /* SK-9E21M */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) },	/* DGE-560T */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, 	/* DGE-550SX */
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) },	/* DGE-560SX */
@@ -139,6 +140,7 @@
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436D) }, /* 88E8055 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4370) }, /* 88E8075 */
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4380) }, /* 88E8057 */
+	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4381) }, /* 88E8059 */
 	{ 0 }
 };
 
@@ -602,6 +604,16 @@
 		/* apply workaround for integrated resistors calibration */
 		gm_phy_write(hw, port, PHY_MARV_PAGE_ADDR, 17);
 		gm_phy_write(hw, port, PHY_MARV_PAGE_DATA, 0x3f60);
+	} else if (hw->chip_id == CHIP_ID_YUKON_OPT && hw->chip_rev == 0) {
+		/* apply fixes in PHY AFE */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0x00ff);
+
+		/* apply RDAC termination workaround */
+		gm_phy_write(hw, port, 24, 0x2800);
+		gm_phy_write(hw, port, 23, 0x2001);
+
+		/* set page register back to 0 */
+		gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 0);
 	} else if (hw->chip_id != CHIP_ID_YUKON_EX &&
 		   hw->chip_id < CHIP_ID_YUKON_SUPR) {
 		/* no effect on Yukon-XL */
@@ -786,8 +798,7 @@
 
 	if ( (hw->chip_id == CHIP_ID_YUKON_EX &&
 	      hw->chip_rev != CHIP_REV_YU_EX_A0) ||
-	     hw->chip_id == CHIP_ID_YUKON_FE_P ||
-	     hw->chip_id == CHIP_ID_YUKON_SUPR) {
+	     hw->chip_id >= CHIP_ID_YUKON_FE_P) {
 		/* Yukon-Extreme B0 and further Extreme devices */
 		/* enable Store & Forward mode for TX */
 
@@ -925,8 +936,14 @@
 
 	/* On chips without ram buffer, pause is controled by MAC level */
 	if (!(hw->flags & SKY2_HW_RAM_BUFFER)) {
-		sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
-		sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
+		/* Pause threshold is scaled by 8 in bytes */
+		if (hw->chip_id == CHIP_ID_YUKON_FE_P
+			&& hw->chip_rev == CHIP_REV_YU_FE2_A0)
+			reg = 1568 / 8;
+		else
+			reg = 1024 / 8;
+		sky2_write16(hw, SK_REG(port, RX_GMF_UP_THR), reg);
+		sky2_write16(hw, SK_REG(port, RX_GMF_LP_THR), 768 / 8);
 
 		sky2_set_tx_stfwd(hw, port);
 	}
@@ -1397,6 +1414,31 @@
 
 	/* Tell chip about available buffers */
 	sky2_rx_update(sky2, rxq);
+
+	if (hw->chip_id == CHIP_ID_YUKON_EX ||
+	    hw->chip_id == CHIP_ID_YUKON_SUPR) {
+		/*
+		 * Disable flushing of non ASF packets;
+		 * must be done after initializing the BMUs;
+		 * drivers without ASF support should do this too, otherwise
+		 * it may happen that they cannot run on ASF devices;
+		 * remember that the MAC FIFO isn't reset during initialization.
+		 */
+		sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_MACSEC_FLUSH_OFF);
+	}
+
+	if (hw->chip_id >= CHIP_ID_YUKON_SUPR) {
+		/* Enable RX Home Address & Routing Header checksum fix */
+		sky2_write16(hw, SK_REG(sky2->port, RX_GMF_FL_CTRL),
+			     RX_IPV6_SA_MOB_ENA | RX_IPV6_DA_MOB_ENA);
+
+		/* Enable TX Home Address & Routing Header checksum fix */
+		sky2_write32(hw, Q_ADDR(txqaddr[sky2->port], Q_TEST),
+			     TBMU_TEST_HOME_ADD_FIX_EN | TBMU_TEST_ROUTING_ADD_FIX_EN);
+	}
+
+
+
 	return 0;
 nomem:
 	sky2_rx_clean(sky2);
@@ -2096,6 +2138,25 @@
 	spin_unlock(&sky2->phy_lock);
 }
 
+/* Special quick link interrupt (Yukon-2 Optima only) */
+static void sky2_qlink_intr(struct sky2_hw *hw)
+{
+	struct sky2_port *sky2 = netdev_priv(hw->dev[0]);
+	u32 imask;
+	u16 phy;
+
+	/* disable irq */
+	imask = sky2_read32(hw, B0_IMSK);
+	imask &= ~Y2_IS_PHY_QLNK;
+	sky2_write32(hw, B0_IMSK, imask);
+
+	/* reset PHY Link Detect */
+	phy = sky2_pci_read16(hw, PSM_CONFIG_REG4);
+	sky2_pci_write16(hw, PSM_CONFIG_REG4, phy | 1);
+
+	sky2_link_up(sky2);
+}
+
 /* Transmit timeout is only called if we are running, carrier is up
  * and tx queue is full (stopped).
  */
@@ -2191,9 +2252,8 @@
 {
 	struct sk_buff *skb;
 
-	skb = netdev_alloc_skb(sky2->netdev, length + 2);
+	skb = netdev_alloc_skb_ip_align(sky2->netdev, length);
 	if (likely(skb)) {
-		skb_reserve(skb, 2);
 		pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr,
 					    length, PCI_DMA_FROMDEVICE);
 		skb_copy_from_linear_data(re->skb, skb->data, length);
@@ -2766,6 +2826,9 @@
 	if (status & Y2_IS_IRQ_PHY2)
 		sky2_phy_intr(hw, 1);
 
+	if (status & Y2_IS_PHY_QLNK)
+		sky2_qlink_intr(hw);
+
 	while ((idx = sky2_read16(hw, STAT_PUT_IDX)) != hw->st_idx) {
 		work_done += sky2_status_intr(hw, work_limit - work_done, idx);
 
@@ -2815,6 +2878,7 @@
 	case CHIP_ID_YUKON_EX:
 	case CHIP_ID_YUKON_SUPR:
 	case CHIP_ID_YUKON_UL_2:
+	case CHIP_ID_YUKON_OPT:
 		return 125;
 
 	case CHIP_ID_YUKON_FE:
@@ -2904,6 +2968,7 @@
 		break;
 
 	case CHIP_ID_YUKON_UL_2:
+	case CHIP_ID_YUKON_OPT:
 		hw->flags = SKY2_HW_GIGABIT
 			| SKY2_HW_ADV_POWER_CTL;
 		break;
@@ -2986,6 +3051,52 @@
 			sky2_write16(hw, SK_REG(i, GMAC_CTRL),
 				     GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON
 				     | GMC_BYP_RETR_ON);
+
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_SUPR && hw->chip_rev > CHIP_REV_YU_SU_B0) {
+		/* enable MACSec clock gating */
+		sky2_pci_write32(hw, PCI_DEV_REG3, P_CLK_MACSEC_DIS);
+	}
+
+	if (hw->chip_id == CHIP_ID_YUKON_OPT) {
+		u16 reg;
+		u32 msk;
+
+		if (hw->chip_rev == 0) {
+			/* disable PCI-E PHY power down (set PHY reg 0x80, bit 7 */
+			sky2_write32(hw, Y2_PEX_PHY_DATA, (0x80UL << 16) | (1 << 7));
+
+			/* set PHY Link Detect Timer to 1.1 second (11x 100ms) */
+			reg = 10;
+		} else {
+			/* set PHY Link Detect Timer to 0.4 second (4x 100ms) */
+			reg = 3;
+		}
+
+		reg <<= PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE;
+
+		/* reset PHY Link Detect */
+		sky2_pci_write16(hw, PSM_CONFIG_REG4,
+				 reg | PSM_CONFIG_REG4_RST_PHY_LINK_DETECT);
+		sky2_pci_write16(hw, PSM_CONFIG_REG4, reg);
+
+
+		/* enable PHY Quick Link */
+		msk = sky2_read32(hw, B0_IMSK);
+		msk |= Y2_IS_PHY_QLNK;
+		sky2_write32(hw, B0_IMSK, msk);
+
+		/* check if PSMv2 was running before */
+		reg = sky2_pci_read16(hw, PSM_CONFIG_REG3);
+		if (reg & PCI_EXP_LNKCTL_ASPMC) {
+			int cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
+			/* restore the PCIe Link Control register */
+			sky2_pci_write16(hw, cap + PCI_EXP_LNKCTL, reg);
+		}
+
+		/* re-enable PEX PM in PEX PHY debug reg. 8 (clear bit 12) */
+		sky2_write32(hw, Y2_PEX_PHY_DATA, PEX_DB_ACCESS | (0x08UL << 16));
 	}
 
 	/* Clear I2C IRQ noise */
@@ -4406,9 +4517,11 @@
 		"FE+",		/* 0xb8 */
 		"Supreme",	/* 0xb9 */
 		"UL 2",		/* 0xba */
+		"Unknown",	/* 0xbb */
+		"Optima",	/* 0xbc */
 	};
 
-	if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_UL_2)
+	if (chipid >= CHIP_ID_YUKON_XL && chipid < CHIP_ID_YUKON_OPT)
 		strncpy(buf, name[chipid - CHIP_ID_YUKON_XL], sz);
 	else
 		snprintf(buf, sz, "(chip %#x)", chipid);
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index ed54129..365d79c 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -16,6 +16,13 @@
 	PCI_DEV_REG5    = 0x88,
 	PCI_CFG_REG_0	= 0x90,
 	PCI_CFG_REG_1	= 0x94,
+
+	PSM_CONFIG_REG0  = 0x98,
+	PSM_CONFIG_REG1	 = 0x9C,
+	PSM_CONFIG_REG2  = 0x160,
+	PSM_CONFIG_REG3  = 0x164,
+	PSM_CONFIG_REG4  = 0x168,
+
 };
 
 /* Yukon-2 */
@@ -48,6 +55,37 @@
 	PCI_USEDATA64	= 1<<0,		/* Use 64Bit Data bus ext */
 };
 
+/*	PCI_OUR_REG_3		32 bit	Our Register 3 (Yukon-ECU only) */
+enum pci_dev_reg_3 {
+	P_CLK_ASF_REGS_DIS	= 1<<18,/* Disable Clock ASF (Yukon-Ext.) */
+	P_CLK_COR_REGS_D0_DIS	= 1<<17,/* Disable Clock Core Regs D0 */
+	P_CLK_MACSEC_DIS	= 1<<17,/* Disable Clock MACSec (Yukon-Ext.) */
+	P_CLK_PCI_REGS_D0_DIS	= 1<<16,/* Disable Clock PCI  Regs D0 */
+	P_CLK_COR_YTB_ARB_DIS	= 1<<15,/* Disable Clock YTB  Arbiter */
+	P_CLK_MAC_LNK1_D3_DIS	= 1<<14,/* Disable Clock MAC  Link1 D3 */
+	P_CLK_COR_LNK1_D0_DIS	= 1<<13,/* Disable Clock Core Link1 D0 */
+	P_CLK_MAC_LNK1_D0_DIS	= 1<<12,/* Disable Clock MAC  Link1 D0 */
+	P_CLK_COR_LNK1_D3_DIS	= 1<<11,/* Disable Clock Core Link1 D3 */
+	P_CLK_PCI_MST_ARB_DIS	= 1<<10,/* Disable Clock PCI  Master Arb. */
+	P_CLK_COR_REGS_D3_DIS	= 1<<9,	/* Disable Clock Core Regs D3 */
+	P_CLK_PCI_REGS_D3_DIS	= 1<<8,	/* Disable Clock PCI  Regs D3 */
+	P_CLK_REF_LNK1_GM_DIS	= 1<<7,	/* Disable Clock Ref. Link1 GMAC */
+	P_CLK_COR_LNK1_GM_DIS	= 1<<6,	/* Disable Clock Core Link1 GMAC */
+	P_CLK_PCI_COMMON_DIS	= 1<<5,	/* Disable Clock PCI  Common */
+	P_CLK_COR_COMMON_DIS	= 1<<4,	/* Disable Clock Core Common */
+	P_CLK_PCI_LNK1_BMU_DIS	= 1<<3,	/* Disable Clock PCI  Link1 BMU */
+	P_CLK_COR_LNK1_BMU_DIS	= 1<<2,	/* Disable Clock Core Link1 BMU */
+	P_CLK_PCI_LNK1_BIU_DIS	= 1<<1,	/* Disable Clock PCI  Link1 BIU */
+	P_CLK_COR_LNK1_BIU_DIS	= 1<<0,	/* Disable Clock Core Link1 BIU */
+	PCIE_OUR3_WOL_D3_COLD_SET = P_CLK_ASF_REGS_DIS |
+				    P_CLK_COR_REGS_D0_DIS |
+				    P_CLK_COR_LNK1_D0_DIS |
+				    P_CLK_MAC_LNK1_D0_DIS |
+				    P_CLK_PCI_MST_ARB_DIS |
+				    P_CLK_COR_COMMON_DIS |
+				    P_CLK_COR_LNK1_BMU_DIS,
+};
+
 /*	PCI_OUR_REG_4		32 bit	Our Register 4 (Yukon-ECU only) */
 enum pci_dev_reg_4 {
 				/* (Link Training & Status State Machine) */
@@ -114,7 +152,7 @@
 				     P_GAT_PCIE_RX_EL_IDLE,
 };
 
-#/*	PCI_CFG_REG_1			32 bit	Config Register 1 (Yukon-Ext only) */
+/*	PCI_CFG_REG_1			32 bit	Config Register 1 (Yukon-Ext only) */
 enum pci_cfg_reg1 {
 	P_CF1_DIS_REL_EVT_RST	= 1<<24, /* Dis. Rel. Event during PCIE reset */
 										/* Bit 23..21: Release Clock on Event */
@@ -145,6 +183,72 @@
 					P_CF1_ENA_TXBMU_WR_IDLE,
 };
 
+/* Yukon-Optima */
+enum {
+	PSM_CONFIG_REG1_AC_PRESENT_STATUS = 1<<31,   /* AC Present Status */
+
+	PSM_CONFIG_REG1_PTP_CLK_SEL	  = 1<<29,   /* PTP Clock Select */
+	PSM_CONFIG_REG1_PTP_MODE	  = 1<<28,   /* PTP Mode */
+
+	PSM_CONFIG_REG1_MUX_PHY_LINK	  = 1<<27,   /* PHY Energy Detect Event */
+
+	PSM_CONFIG_REG1_EN_PIN63_AC_PRESENT = 1<<26,  /* Enable LED_DUPLEX for ac_present */
+	PSM_CONFIG_REG1_EN_PCIE_TIMER	  = 1<<25,    /* Enable PCIe Timer */
+	PSM_CONFIG_REG1_EN_SPU_TIMER	  = 1<<24,    /* Enable SPU Timer */
+	PSM_CONFIG_REG1_POLARITY_AC_PRESENT = 1<<23,  /* AC Present Polarity */
+
+	PSM_CONFIG_REG1_EN_AC_PRESENT	  = 1<<21,    /* Enable AC Present */
+
+	PSM_CONFIG_REG1_EN_GPHY_INT_PSM	= 1<<20,      /* Enable GPHY INT for PSM */
+	PSM_CONFIG_REG1_DIS_PSM_TIMER	= 1<<19,      /* Disable PSM Timer */
+};
+
+/* Yukon-Supreme */
+enum {
+	PSM_CONFIG_REG1_GPHY_ENERGY_STS	= 1<<31, /* GPHY Energy Detect Status */
+
+	PSM_CONFIG_REG1_UART_MODE_MSK	= 3<<29, /* UART_Mode */
+	PSM_CONFIG_REG1_CLK_RUN_ASF	= 1<<28, /* Enable Clock Free Running for ASF Subsystem */
+	PSM_CONFIG_REG1_UART_CLK_DISABLE= 1<<27, /* Disable UART clock */
+	PSM_CONFIG_REG1_VAUX_ONE	= 1<<26, /* Tie internal Vaux to 1'b1 */
+	PSM_CONFIG_REG1_UART_FC_RI_VAL	= 1<<25, /* Default value for UART_RI_n */
+	PSM_CONFIG_REG1_UART_FC_DCD_VAL	= 1<<24, /* Default value for UART_DCD_n */
+	PSM_CONFIG_REG1_UART_FC_DSR_VAL	= 1<<23, /* Default value for UART_DSR_n */
+	PSM_CONFIG_REG1_UART_FC_CTS_VAL	= 1<<22, /* Default value for UART_CTS_n */
+	PSM_CONFIG_REG1_LATCH_VAUX	= 1<<21, /* Enable Latch current Vaux_avlbl */
+	PSM_CONFIG_REG1_FORCE_TESTMODE_INPUT= 1<<20, /* Force Testmode pin as input PAD */
+	PSM_CONFIG_REG1_UART_RST	= 1<<19, /* UART_RST */
+	PSM_CONFIG_REG1_PSM_PCIE_L1_POL	= 1<<18, /* PCIE L1 Event Polarity for PSM */
+	PSM_CONFIG_REG1_TIMER_STAT	= 1<<17, /* PSM Timer Status */
+	PSM_CONFIG_REG1_GPHY_INT	= 1<<16, /* GPHY INT Status */
+	PSM_CONFIG_REG1_FORCE_TESTMODE_ZERO= 1<<15, /* Force internal Testmode as 1'b0 */
+	PSM_CONFIG_REG1_EN_INT_ASPM_CLKREQ = 1<<14, /* ENABLE INT for CLKRUN on ASPM and CLKREQ */
+	PSM_CONFIG_REG1_EN_SND_TASK_ASPM_CLKREQ	= 1<<13, /* ENABLE Snd_task for CLKRUN on ASPM and CLKREQ */
+	PSM_CONFIG_REG1_DIS_CLK_GATE_SND_TASK	= 1<<12, /* Disable CLK_GATE control snd_task */
+	PSM_CONFIG_REG1_DIS_FF_CHIAN_SND_INTA	= 1<<11, /* Disable flip-flop chain for sndmsg_inta */
+
+	PSM_CONFIG_REG1_DIS_LOADER	= 1<<9, /* Disable Loader SM after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_DO_PWDN		= 1<<8, /* Do Power Down, Start PSM Scheme */
+	PSM_CONFIG_REG1_DIS_PIG		= 1<<7, /* Disable Plug-in-Go SM after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_DIS_PERST	= 1<<6, /* Disable Internal PCIe Reset after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_EN_REG18_PD	= 1<<5, /* Enable REG18 Power Down for PSM */
+	PSM_CONFIG_REG1_EN_PSM_LOAD	= 1<<4, /* Disable EEPROM Loader after PSM Goes back to IDLE */
+	PSM_CONFIG_REG1_EN_PSM_HOT_RST	= 1<<3, /* Enable PCIe Hot Reset for PSM */
+	PSM_CONFIG_REG1_EN_PSM_PERST	= 1<<2, /* Enable PCIe Reset Event for PSM */
+	PSM_CONFIG_REG1_EN_PSM_PCIE_L1	= 1<<1, /* Enable PCIe L1 Event for PSM */
+	PSM_CONFIG_REG1_EN_PSM		= 1<<0, /* Enable PSM Scheme */
+};
+
+/*	PSM_CONFIG_REG4				0x0168	PSM Config Register 4 */
+enum {
+						/* PHY Link Detect Timer */
+	PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_MSK = 0xf<<4,
+	PSM_CONFIG_REG4_TIMER_PHY_LINK_DETECT_BASE = 4,
+
+	PSM_CONFIG_REG4_DEBUG_TIMER	    = 1<<1, /* Debug Timer */
+	PSM_CONFIG_REG4_RST_PHY_LINK_DETECT = 1<<0, /* Reset GPHY Link Detect */
+};
+
 
 #define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \
 			       PCI_STATUS_SIG_SYSTEM_ERROR | \
@@ -197,6 +301,9 @@
 	B2_I2C_IRQ	= 0x0168,
 	B2_I2C_SW	= 0x016c,
 
+	Y2_PEX_PHY_DATA = 0x0170,
+	Y2_PEX_PHY_ADDR = 0x0172,
+
 	B3_RAM_ADDR	= 0x0180,
 	B3_RAM_DATA_LO	= 0x0184,
 	B3_RAM_DATA_HI	= 0x0188,
@@ -317,6 +424,10 @@
 	Y2_IS_CHK_TXS2	= 1<<9,		/* Descriptor error TXS 2 */
 	Y2_IS_CHK_TXA2	= 1<<8,		/* Descriptor error TXA 2 */
 
+	Y2_IS_PSM_ACK	= 1<<7,		/* PSM Acknowledge (Yukon-Optima only) */
+	Y2_IS_PTP_TIST	= 1<<6,		/* PTP Time Stamp (Yukon-Optima only) */
+	Y2_IS_PHY_QLNK	= 1<<5,		/* PHY Quick Link (Yukon-Optima only) */
+
 	Y2_IS_IRQ_PHY1	= 1<<4,		/* Interrupt from PHY 1 */
 	Y2_IS_IRQ_MAC1	= 1<<3,		/* Interrupt from MAC 1 */
 	Y2_IS_CHK_RX1	= 1<<2,		/* Descriptor error Rx 1 */
@@ -435,6 +546,7 @@
  	CHIP_ID_YUKON_FE_P = 0xb8, /* YUKON-2 FE+ */
 	CHIP_ID_YUKON_SUPR = 0xb9, /* YUKON-2 Supreme */
 	CHIP_ID_YUKON_UL_2 = 0xba, /* YUKON-2 Ultra 2 */
+	CHIP_ID_YUKON_OPT  = 0xbc, /* YUKON-2 Optima */
 };
 enum yukon_ec_rev {
 	CHIP_REV_YU_EC_A1    = 0,  /* Chip Rev. for Yukon-EC A1/A0 */
@@ -459,6 +571,8 @@
 };
 enum yukon_supr_rev {
 	CHIP_REV_YU_SU_A0    = 0,
+	CHIP_REV_YU_SU_B0    = 1,
+	CHIP_REV_YU_SU_B1    = 3,
 };
 
 
@@ -513,6 +627,12 @@
 	TIM_T_STEP	= 1<<0,	/* Test step */
 };
 
+/*	Y2_PEX_PHY_ADDR/DATA		PEX PHY address and data reg  (Yukon-2 only) */
+enum {
+	PEX_RD_ACCESS	= 1<<31, /* Access Mode Read = 1, Write = 0 */
+	PEX_DB_ACCESS	= 1<<30, /* Access to debug register */
+};
+
 /*	B3_RAM_ADDR		32 bit	RAM Address, to read or write */
 					/* Bit 31..19:	reserved */
 #define RAM_ADR_RAN	0x0007ffffL	/* Bit 18.. 0:	RAM Address Range */
@@ -688,10 +808,11 @@
 	RX_GMF_AF_THR	= 0x0c44,/* 32 bit	Rx GMAC FIFO Almost Full Thresh. */
 	RX_GMF_CTRL_T	= 0x0c48,/* 32 bit	Rx GMAC FIFO Control/Test */
 	RX_GMF_FL_MSK	= 0x0c4c,/* 32 bit	Rx GMAC FIFO Flush Mask */
-	RX_GMF_FL_THR	= 0x0c50,/* 32 bit	Rx GMAC FIFO Flush Threshold */
+	RX_GMF_FL_THR	= 0x0c50,/* 16 bit	Rx GMAC FIFO Flush Threshold */
+	RX_GMF_FL_CTRL	= 0x0c52,/* 16 bit	Rx GMAC FIFO Flush Control */
 	RX_GMF_TR_THR	= 0x0c54,/* 32 bit	Rx Truncation Threshold (Yukon-2) */
-	RX_GMF_UP_THR	= 0x0c58,/*  8 bit	Rx Upper Pause Thr (Yukon-EC_U) */
-	RX_GMF_LP_THR	= 0x0c5a,/*  8 bit	Rx Lower Pause Thr (Yukon-EC_U) */
+	RX_GMF_UP_THR	= 0x0c58,/* 16 bit	Rx Upper Pause Thr (Yukon-EC_U) */
+	RX_GMF_LP_THR	= 0x0c5a,/* 16 bit	Rx Lower Pause Thr (Yukon-EC_U) */
 	RX_GMF_VLAN	= 0x0c5c,/* 32 bit	Rx VLAN Type Register (Yukon-2) */
 	RX_GMF_WP	= 0x0c60,/* 32 bit	Rx GMAC FIFO Write Pointer */
 
@@ -754,6 +875,42 @@
 	BMU_TX_CLR_IRQ_TCP	= 1<<11, /* Clear IRQ on TCP segment length mismatch */
 };
 
+/*	TBMU_TEST			0x06B8	Transmit BMU Test Register */
+enum {
+	TBMU_TEST_BMU_TX_CHK_AUTO_OFF		= 1<<31, /* BMU Tx Checksum Auto Calculation Disable */
+	TBMU_TEST_BMU_TX_CHK_AUTO_ON		= 1<<30, /* BMU Tx Checksum Auto Calculation Enable */
+	TBMU_TEST_HOME_ADD_PAD_FIX1_EN		= 1<<29, /* Home Address Paddiing FIX1 Enable */
+	TBMU_TEST_HOME_ADD_PAD_FIX1_DIS		= 1<<28, /* Home Address Paddiing FIX1 Disable */
+	TBMU_TEST_ROUTING_ADD_FIX_EN		= 1<<27, /* Routing Address Fix Enable */
+	TBMU_TEST_ROUTING_ADD_FIX_DIS		= 1<<26, /* Routing Address Fix Disable */
+	TBMU_TEST_HOME_ADD_FIX_EN		= 1<<25, /* Home address checksum fix enable */
+	TBMU_TEST_HOME_ADD_FIX_DIS		= 1<<24, /* Home address checksum fix disable */
+
+	TBMU_TEST_TEST_RSPTR_ON			= 1<<22, /* Testmode Shadow Read Ptr On */
+	TBMU_TEST_TEST_RSPTR_OFF		= 1<<21, /* Testmode Shadow Read Ptr Off */
+	TBMU_TEST_TESTSTEP_RSPTR		= 1<<20, /* Teststep Shadow Read Ptr */
+
+	TBMU_TEST_TEST_RPTR_ON			= 1<<18, /* Testmode Read Ptr On */
+	TBMU_TEST_TEST_RPTR_OFF			= 1<<17, /* Testmode Read Ptr Off */
+	TBMU_TEST_TESTSTEP_RPTR			= 1<<16, /* Teststep Read Ptr */
+
+	TBMU_TEST_TEST_WSPTR_ON			= 1<<14, /* Testmode Shadow Write Ptr On */
+	TBMU_TEST_TEST_WSPTR_OFF		= 1<<13, /* Testmode Shadow Write Ptr Off */
+	TBMU_TEST_TESTSTEP_WSPTR		= 1<<12, /* Teststep Shadow Write Ptr */
+
+	TBMU_TEST_TEST_WPTR_ON			= 1<<10, /* Testmode Write Ptr On */
+	TBMU_TEST_TEST_WPTR_OFF			= 1<<9, /* Testmode Write Ptr Off */
+	TBMU_TEST_TESTSTEP_WPTR			= 1<<8,			/* Teststep Write Ptr */
+
+	TBMU_TEST_TEST_REQ_NB_ON		= 1<<6, /* Testmode Req Nbytes/Addr On */
+	TBMU_TEST_TEST_REQ_NB_OFF		= 1<<5, /* Testmode Req Nbytes/Addr Off */
+	TBMU_TEST_TESTSTEP_REQ_NB		= 1<<4, /* Teststep Req Nbytes/Addr */
+
+	TBMU_TEST_TEST_DONE_IDX_ON		= 1<<2, /* Testmode Done Index On */
+	TBMU_TEST_TEST_DONE_IDX_OFF		= 1<<1, /* Testmode Done Index Off */
+	TBMU_TEST_TESTSTEP_DONE_IDX		= 1<<0,	/* Teststep Done Index */
+};
+
 /* Queue Prefetch Unit Offsets, use Y2_QADDR() to address (Yukon-2 only)*/
 /* PREF_UNIT_CTRL	32 bit	Prefetch Control register */
 enum {
@@ -1674,6 +1831,12 @@
 
 /*	RX_GMF_CTRL_T	32 bit	Rx GMAC FIFO Control/Test */
 enum {
+	RX_GCLKMAC_ENA	= 1<<31,	/* RX MAC Clock Gating Enable */
+	RX_GCLKMAC_OFF	= 1<<30,
+
+	RX_STFW_DIS	= 1<<29,	/* RX Store and Forward Enable */
+	RX_STFW_ENA	= 1<<28,
+
 	RX_TRUNC_ON	= 1<<27,  	/* enable  packet truncation */
 	RX_TRUNC_OFF	= 1<<26, 	/* disable packet truncation */
 	RX_VLAN_STRIP_ON = 1<<25,	/* enable  VLAN stripping */
@@ -1711,6 +1874,20 @@
 	GMF_RX_CTRL_DEF	= GMF_OPER_ON | GMF_RX_F_FL_ON,
 };
 
+/*	RX_GMF_FL_CTRL	16 bit	Rx GMAC FIFO Flush Control (Yukon-Supreme) */
+enum {
+	RX_IPV6_SA_MOB_ENA	= 1<<9,	/* IPv6 SA Mobility Support Enable */
+	RX_IPV6_SA_MOB_DIS	= 1<<8,	/* IPv6 SA Mobility Support Disable */
+	RX_IPV6_DA_MOB_ENA	= 1<<7,	/* IPv6 DA Mobility Support Enable */
+	RX_IPV6_DA_MOB_DIS	= 1<<6,	/* IPv6 DA Mobility Support Disable */
+	RX_PTR_SYNCDLY_ENA	= 1<<5,	/* Pointers Delay Synch Enable */
+	RX_PTR_SYNCDLY_DIS	= 1<<4,	/* Pointers Delay Synch Disable */
+	RX_ASF_NEWFLAG_ENA	= 1<<3,	/* RX ASF Flag New Logic Enable */
+	RX_ASF_NEWFLAG_DIS	= 1<<2,	/* RX ASF Flag New Logic Disable */
+	RX_FLSH_MISSPKT_ENA	= 1<<1,	/* RX Flush Miss-Packet Enable */
+	RX_FLSH_MISSPKT_DIS	= 1<<0,	/* RX Flush Miss-Packet Disable */
+};
+
 /*	TX_GMF_EA		32 bit	Tx GMAC FIFO End Address */
 enum {
 	TX_DYN_WM_ENA	= 3,	/* Yukon-FE+ specific */
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index ccdd196..6a9f51d 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -2071,6 +2071,9 @@
 	if (is_valid_ether_addr(dev->dev_addr)) {
 		smsc911x_set_hw_mac_address(pdata, dev->dev_addr);
 		SMSC_TRACE(PROBE, "MAC Address is specified by configuration");
+	} else if (is_valid_ether_addr(pdata->config.mac)) {
+		memcpy(dev->dev_addr, pdata->config.mac, 6);
+		SMSC_TRACE(PROBE, "MAC Address specified by platform data");
 	} else {
 		/* Try reading mac address from device. if EEPROM is present
 		 * it will already have been set */
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 305ec3d..d6f4faf 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1033,10 +1033,8 @@
 			(csum_stuff_off << 21));
 	}
 
-	local_irq_save(flags);
-	if (!spin_trylock(&gp->tx_lock)) {
+	if (!spin_trylock_irqsave(&gp->tx_lock, flags)) {
 		/* Tell upper layer to requeue */
-		local_irq_restore(flags);
 		return NETDEV_TX_LOCKED;
 	}
 	/* We raced with gem_do_stop() */
diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c
index d1298e5..6572e8a 100644
--- a/drivers/net/tc35815.c
+++ b/drivers/net/tc35815.c
@@ -22,11 +22,7 @@
  * All Rights Reserved.
  */
 
-#ifdef TC35815_NAPI
-#define DRV_VERSION	"1.38-NAPI"
-#else
-#define DRV_VERSION	"1.38"
-#endif
+#define DRV_VERSION	"1.39"
 static const char *version = "tc35815.c:v" DRV_VERSION "\n";
 #define MODNAME			"tc35815"
 
@@ -54,13 +50,6 @@
 #include <asm/io.h>
 #include <asm/byteorder.h>
 
-/* First, a few definitions that the brave might change. */
-
-#define GATHER_TXINT	/* On-Demand Tx Interrupt */
-#define WORKAROUND_LOSTCAR
-#define WORKAROUND_100HALF_PROMISC
-/* #define TC35815_USE_PACKEDBUFFER */
-
 enum tc35815_chiptype {
 	TC35815CF = 0,
 	TC35815_NWU,
@@ -330,17 +319,10 @@
 
 
 /* Some useful constants. */
-#undef NO_CHECK_CARRIER	/* Does not check No-Carrier with TP */
 
-#ifdef NO_CHECK_CARRIER
-#define TX_CTL_CMD	(Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
-	Tx_EnExColl | Tx_EnExDefer | Tx_EnUnder | \
-	Tx_En)	/* maybe  0x7b01 */
-#else
-#define TX_CTL_CMD	(Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
+#define TX_CTL_CMD	(Tx_EnTxPar | Tx_EnLateColl | \
 	Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
 	Tx_En)	/* maybe  0x7b01 */
-#endif
 /* Do not use Rx_StripCRC -- it causes trouble on BLEx/FDAEx condition */
 #define RX_CTL_CMD	(Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
 	| Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
@@ -361,13 +343,6 @@
 #define TX_THRESHOLD_KEEP_LIMIT 10
 
 /* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
-#ifdef TC35815_USE_PACKEDBUFFER
-#define FD_PAGE_NUM 2
-#define RX_BUF_NUM	8	/* >= 2 */
-#define RX_FD_NUM	250	/* >= 32 */
-#define TX_FD_NUM	128
-#define RX_BUF_SIZE	PAGE_SIZE
-#else /* TC35815_USE_PACKEDBUFFER */
 #define FD_PAGE_NUM 4
 #define RX_BUF_NUM	128	/* < 256 */
 #define RX_FD_NUM	256	/* >= 32 */
@@ -381,7 +356,6 @@
 #define RX_BUF_SIZE	\
 	L1_CACHE_ALIGN(ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN + NET_IP_ALIGN)
 #endif
-#endif /* TC35815_USE_PACKEDBUFFER */
 #define RX_FD_RESERVE	(2 / 2)	/* max 2 BD per RxFD */
 #define NAPI_WEIGHT	16
 
@@ -439,11 +413,7 @@
 	/*
 	 * Transmitting: Batch Mode.
 	 *	1 BD in 1 TxFD.
-	 * Receiving: Packing Mode. (TC35815_USE_PACKEDBUFFER)
-	 *	1 circular FD for Free Buffer List.
-	 *	RX_BUF_NUM BD in Free Buffer FD.
-	 *	One Free Buffer BD has PAGE_SIZE data buffer.
-	 * Or Non-Packing Mode.
+	 * Receiving: Non-Packing Mode.
 	 *	1 circular FD for Free Buffer List.
 	 *	RX_BUF_NUM BD in Free Buffer FD.
 	 *	One Free Buffer BD has ETH_FRAME_LEN data buffer.
@@ -457,21 +427,11 @@
 	struct RxFD *rfd_limit;
 	struct RxFD *rfd_cur;
 	struct FrFD *fbl_ptr;
-#ifdef TC35815_USE_PACKEDBUFFER
-	unsigned char fbl_curid;
-	void *data_buf[RX_BUF_NUM];		/* packing */
-	dma_addr_t data_buf_dma[RX_BUF_NUM];
-	struct {
-		struct sk_buff *skb;
-		dma_addr_t skb_dma;
-	} tx_skbs[TX_FD_NUM];
-#else
 	unsigned int fbl_count;
 	struct {
 		struct sk_buff *skb;
 		dma_addr_t skb_dma;
 	} tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM];
-#endif
 	u32 msg_enable;
 	enum tc35815_chiptype chiptype;
 };
@@ -486,51 +446,6 @@
 	return (void *)((u8 *)lp->fd_buf + (bus - lp->fd_buf_dma));
 }
 #endif
-#ifdef TC35815_USE_PACKEDBUFFER
-static inline void *rxbuf_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
-{
-	int i;
-	for (i = 0; i < RX_BUF_NUM; i++) {
-		if (bus >= lp->data_buf_dma[i] &&
-		    bus < lp->data_buf_dma[i] + PAGE_SIZE)
-			return (void *)((u8 *)lp->data_buf[i] +
-					(bus - lp->data_buf_dma[i]));
-	}
-	return NULL;
-}
-
-#define TC35815_DMA_SYNC_ONDEMAND
-static void *alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
-{
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-	void *buf;
-	/* pci_map + pci_dma_sync will be more effective than
-	 * pci_alloc_consistent on some archs. */
-	buf = (void *)__get_free_page(GFP_ATOMIC);
-	if (!buf)
-		return NULL;
-	*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
-				     PCI_DMA_FROMDEVICE);
-	if (pci_dma_mapping_error(hwdev, *dma_handle)) {
-		free_page((unsigned long)buf);
-		return NULL;
-	}
-	return buf;
-#else
-	return pci_alloc_consistent(hwdev, PAGE_SIZE, dma_handle);
-#endif
-}
-
-static void free_rxbuf_page(struct pci_dev *hwdev, void *buf, dma_addr_t dma_handle)
-{
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-	pci_unmap_single(hwdev, dma_handle, PAGE_SIZE, PCI_DMA_FROMDEVICE);
-	free_page((unsigned long)buf);
-#else
-	pci_free_consistent(hwdev, PAGE_SIZE, buf, dma_handle);
-#endif
-}
-#else /* TC35815_USE_PACKEDBUFFER */
 static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
 				       struct pci_dev *hwdev,
 				       dma_addr_t *dma_handle)
@@ -555,19 +470,14 @@
 			 PCI_DMA_FROMDEVICE);
 	dev_kfree_skb_any(skb);
 }
-#endif /* TC35815_USE_PACKEDBUFFER */
 
 /* Index to functions, as function prototypes. */
 
 static int	tc35815_open(struct net_device *dev);
 static int	tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
 static irqreturn_t	tc35815_interrupt(int irq, void *dev_id);
-#ifdef TC35815_NAPI
 static int	tc35815_rx(struct net_device *dev, int limit);
 static int	tc35815_poll(struct napi_struct *napi, int budget);
-#else
-static void	tc35815_rx(struct net_device *dev);
-#endif
 static void	tc35815_txdone(struct net_device *dev);
 static int	tc35815_close(struct net_device *dev);
 static struct	net_device_stats *tc35815_get_stats(struct net_device *dev);
@@ -654,8 +564,6 @@
 		 * TX4939 PCFG.SPEEDn bit will be changed on
 		 * NETDEV_CHANGE event.
 		 */
-
-#if !defined(NO_CHECK_CARRIER) && defined(WORKAROUND_LOSTCAR)
 		/*
 		 * WORKAROUND: enable LostCrS only if half duplex
 		 * operation.
@@ -665,7 +573,6 @@
 		    lp->chiptype != TC35815_TX4939)
 			tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr,
 				  &tr->Tx_Ctl);
-#endif
 
 		lp->speed = phydev->speed;
 		lp->duplex = phydev->duplex;
@@ -674,11 +581,9 @@
 
 	if (phydev->link != lp->link) {
 		if (phydev->link) {
-#ifdef WORKAROUND_100HALF_PROMISC
 			/* delayed promiscuous enabling */
 			if (dev->flags & IFF_PROMISC)
 				tc35815_set_multicast_list(dev);
-#endif
 		} else {
 			lp->speed = 0;
 			lp->duplex = -1;
@@ -923,9 +828,7 @@
 	dev->netdev_ops = &tc35815_netdev_ops;
 	dev->ethtool_ops = &tc35815_ethtool_ops;
 	dev->watchdog_timeo = TC35815_TX_TIMEOUT;
-#ifdef TC35815_NAPI
 	netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
-#endif
 
 	dev->irq = pdev->irq;
 	dev->base_addr = (unsigned long)ioaddr;
@@ -1007,25 +910,6 @@
 		if (!lp->fd_buf)
 			return -ENOMEM;
 		for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-			lp->data_buf[i] =
-				alloc_rxbuf_page(lp->pci_dev,
-						 &lp->data_buf_dma[i]);
-			if (!lp->data_buf[i]) {
-				while (--i >= 0) {
-					free_rxbuf_page(lp->pci_dev,
-							lp->data_buf[i],
-							lp->data_buf_dma[i]);
-					lp->data_buf[i] = NULL;
-				}
-				pci_free_consistent(lp->pci_dev,
-						    PAGE_SIZE * FD_PAGE_NUM,
-						    lp->fd_buf,
-						    lp->fd_buf_dma);
-				lp->fd_buf = NULL;
-				return -ENOMEM;
-			}
-#else
 			lp->rx_skbs[i].skb =
 				alloc_rxbuf_skb(dev, lp->pci_dev,
 						&lp->rx_skbs[i].skb_dma);
@@ -1043,15 +927,9 @@
 				lp->fd_buf = NULL;
 				return -ENOMEM;
 			}
-#endif
 		}
 		printk(KERN_DEBUG "%s: FD buf %p DataBuf",
 		       dev->name, lp->fd_buf);
-#ifdef TC35815_USE_PACKEDBUFFER
-		printk(" DataBuf");
-		for (i = 0; i < RX_BUF_NUM; i++)
-			printk(" %p", lp->data_buf[i]);
-#endif
 		printk("\n");
 	} else {
 		for (i = 0; i < FD_PAGE_NUM; i++)
@@ -1084,7 +962,6 @@
 	lp->fbl_ptr = (struct FrFD *)fd_addr;
 	lp->fbl_ptr->fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, lp->fbl_ptr));
 	lp->fbl_ptr->fd.FDCtl = cpu_to_le32(RX_BUF_NUM | FD_CownsFD);
-#ifndef TC35815_USE_PACKEDBUFFER
 	/*
 	 * move all allocated skbs to head of rx_skbs[] array.
 	 * fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in
@@ -1102,11 +979,7 @@
 			lp->fbl_count++;
 		}
 	}
-#endif
 	for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-		lp->fbl_ptr->bd[i].BuffData = cpu_to_le32(lp->data_buf_dma[i]);
-#else
 		if (i >= lp->fbl_count) {
 			lp->fbl_ptr->bd[i].BuffData = 0;
 			lp->fbl_ptr->bd[i].BDCtl = 0;
@@ -1114,15 +987,11 @@
 		}
 		lp->fbl_ptr->bd[i].BuffData =
 			cpu_to_le32(lp->rx_skbs[i].skb_dma);
-#endif
 		/* BDID is index of FrFD.bd[] */
 		lp->fbl_ptr->bd[i].BDCtl =
 			cpu_to_le32(BD_CownsBD | (i << BD_RxBDID_SHIFT) |
 				    RX_BUF_SIZE);
 	}
-#ifdef TC35815_USE_PACKEDBUFFER
-	lp->fbl_curid = 0;
-#endif
 
 	printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n",
 	       dev->name, lp->tfd_base, lp->rfd_base, lp->fbl_ptr);
@@ -1196,19 +1065,11 @@
 	lp->fbl_ptr = NULL;
 
 	for (i = 0; i < RX_BUF_NUM; i++) {
-#ifdef TC35815_USE_PACKEDBUFFER
-		if (lp->data_buf[i]) {
-			free_rxbuf_page(lp->pci_dev,
-					lp->data_buf[i], lp->data_buf_dma[i]);
-			lp->data_buf[i] = NULL;
-		}
-#else
 		if (lp->rx_skbs[i].skb) {
 			free_rxbuf_skb(lp->pci_dev, lp->rx_skbs[i].skb,
 				       lp->rx_skbs[i].skb_dma);
 			lp->rx_skbs[i].skb = NULL;
 		}
-#endif
 	}
 	if (lp->fd_buf) {
 		pci_free_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM,
@@ -1254,7 +1115,7 @@
 	return bd_count;
 }
 
-#if defined(DEBUG) || defined(TC35815_USE_PACKEDBUFFER)
+#ifdef DEBUG
 static void
 dump_frfd(struct FrFD *fd)
 {
@@ -1271,9 +1132,7 @@
 		       le32_to_cpu(fd->bd[i].BDCtl));
 	printk("\n");
 }
-#endif
 
-#ifdef DEBUG
 static void
 panic_queues(struct net_device *dev)
 {
@@ -1400,9 +1259,7 @@
 		return -EAGAIN;
 	}
 
-#ifdef TC35815_NAPI
 	napi_enable(&lp->napi);
-#endif
 
 	/* Reset the hardware here. Don't forget to set the station address. */
 	spin_lock_irq(&lp->lock);
@@ -1478,9 +1335,7 @@
 			(struct tc35815_regs __iomem *)dev->base_addr;
 		/* Start DMA Transmitter. */
 		txfd->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
-#ifdef GATHER_TXINT
 		txfd->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
-#endif
 		if (netif_msg_tx_queued(lp)) {
 			printk("%s: starting TxFD.\n", dev->name);
 			dump_txfd(txfd);
@@ -1536,11 +1391,7 @@
 	tc35815_schedule_restart(dev);
 }
 
-#ifdef TC35815_NAPI
 static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
-#else
-static int tc35815_do_interrupt(struct net_device *dev, u32 status)
-#endif
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	int ret = -1;
@@ -1579,12 +1430,7 @@
 	/* normal notification */
 	if (status & Int_IntMacRx) {
 		/* Got a packet(s). */
-#ifdef TC35815_NAPI
 		ret = tc35815_rx(dev, limit);
-#else
-		tc35815_rx(dev);
-		ret = 0;
-#endif
 		lp->lstats.rx_ints++;
 	}
 	if (status & Int_IntMacTx) {
@@ -1592,7 +1438,8 @@
 		lp->lstats.tx_ints++;
 		tc35815_txdone(dev);
 		netif_wake_queue(dev);
-		ret = 0;
+		if (ret < 0)
+			ret = 0;
 	}
 	return ret;
 }
@@ -1607,7 +1454,6 @@
 	struct tc35815_local *lp = netdev_priv(dev);
 	struct tc35815_regs __iomem *tr =
 		(struct tc35815_regs __iomem *)dev->base_addr;
-#ifdef TC35815_NAPI
 	u32 dmactl = tc_readl(&tr->DMA_Ctl);
 
 	if (!(dmactl & DMA_IntMask)) {
@@ -1624,22 +1470,6 @@
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
-#else
-	int handled;
-	u32 status;
-
-	spin_lock(&lp->lock);
-	status = tc_readl(&tr->Int_Src);
-	/* BLEx, FDAEx will be cleared later */
-	tc_writel(status & ~(Int_BLEx | Int_FDAEx),
-		  &tr->Int_Src);	/* write to clear */
-	handled = tc35815_do_interrupt(dev, status);
-	if (status & (Int_BLEx | Int_FDAEx))
-		tc_writel(status & (Int_BLEx | Int_FDAEx), &tr->Int_Src);
-	(void)tc_readl(&tr->Int_Src);	/* flush */
-	spin_unlock(&lp->lock);
-	return IRQ_RETVAL(handled >= 0);
-#endif /* TC35815_NAPI */
 }
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
@@ -1652,20 +1482,13 @@
 #endif
 
 /* We have a good packet(s), get it/them out of the buffers. */
-#ifdef TC35815_NAPI
 static int
 tc35815_rx(struct net_device *dev, int limit)
-#else
-static void
-tc35815_rx(struct net_device *dev)
-#endif
 {
 	struct tc35815_local *lp = netdev_priv(dev);
 	unsigned int fdctl;
 	int i;
-#ifdef TC35815_NAPI
 	int received = 0;
-#endif
 
 	while (!((fdctl = le32_to_cpu(lp->rfd_cur->fd.FDCtl)) & FD_CownsFD)) {
 		int status = le32_to_cpu(lp->rfd_cur->fd.FDStat);
@@ -1684,52 +1507,9 @@
 			struct sk_buff *skb;
 			unsigned char *data;
 			int cur_bd;
-#ifdef TC35815_USE_PACKEDBUFFER
-			int offset;
-#endif
 
-#ifdef TC35815_NAPI
 			if (--limit < 0)
 				break;
-#endif
-#ifdef TC35815_USE_PACKEDBUFFER
-			BUG_ON(bd_count > 2);
-			skb = dev_alloc_skb(pkt_len + NET_IP_ALIGN);
-			if (skb == NULL) {
-				printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
-				       dev->name);
-				dev->stats.rx_dropped++;
-				break;
-			}
-			skb_reserve(skb, NET_IP_ALIGN);
-
-			data = skb_put(skb, pkt_len);
-
-			/* copy from receive buffer */
-			cur_bd = 0;
-			offset = 0;
-			while (offset < pkt_len && cur_bd < bd_count) {
-				int len = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BDCtl) &
-					BD_BuffLength_MASK;
-				dma_addr_t dma = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BuffData);
-				void *rxbuf = rxbuf_bus_to_virt(lp, dma);
-				if (offset + len > pkt_len)
-					len = pkt_len - offset;
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-				pci_dma_sync_single_for_cpu(lp->pci_dev,
-							    dma, len,
-							    PCI_DMA_FROMDEVICE);
-#endif
-				memcpy(data + offset, rxbuf, len);
-#ifdef TC35815_DMA_SYNC_ONDEMAND
-				pci_dma_sync_single_for_device(lp->pci_dev,
-							       dma, len,
-							       PCI_DMA_FROMDEVICE);
-#endif
-				offset += len;
-				cur_bd++;
-			}
-#else /* TC35815_USE_PACKEDBUFFER */
 			BUG_ON(bd_count > 1);
 			cur_bd = (le32_to_cpu(lp->rfd_cur->bd[0].BDCtl)
 				  & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
@@ -1757,16 +1537,11 @@
 				memmove(skb->data, skb->data - NET_IP_ALIGN,
 					pkt_len);
 			data = skb_put(skb, pkt_len);
-#endif /* TC35815_USE_PACKEDBUFFER */
 			if (netif_msg_pktdata(lp))
 				print_eth(data);
 			skb->protocol = eth_type_trans(skb, dev);
-#ifdef TC35815_NAPI
 			netif_receive_skb(skb);
 			received++;
-#else
-			netif_rx(skb);
-#endif
 			dev->stats.rx_packets++;
 			dev->stats.rx_bytes += pkt_len;
 		} else {
@@ -1803,19 +1578,11 @@
 			BUG_ON(id >= RX_BUF_NUM);
 #endif
 			/* free old buffers */
-#ifdef TC35815_USE_PACKEDBUFFER
-			while (lp->fbl_curid != id)
-#else
 			lp->fbl_count--;
 			while (lp->fbl_count < RX_BUF_NUM)
-#endif
 			{
-#ifdef TC35815_USE_PACKEDBUFFER
-				unsigned char curid = lp->fbl_curid;
-#else
 				unsigned char curid =
 					(id + 1 + lp->fbl_count) % RX_BUF_NUM;
-#endif
 				struct BDesc *bd = &lp->fbl_ptr->bd[curid];
 #ifdef DEBUG
 				bdctl = le32_to_cpu(bd->BDCtl);
@@ -1826,7 +1593,6 @@
 				}
 #endif
 				/* pass BD to controller */
-#ifndef TC35815_USE_PACKEDBUFFER
 				if (!lp->rx_skbs[curid].skb) {
 					lp->rx_skbs[curid].skb =
 						alloc_rxbuf_skb(dev,
@@ -1836,21 +1602,11 @@
 						break; /* try on next reception */
 					bd->BuffData = cpu_to_le32(lp->rx_skbs[curid].skb_dma);
 				}
-#endif /* TC35815_USE_PACKEDBUFFER */
 				/* Note: BDLength was modified by chip. */
 				bd->BDCtl = cpu_to_le32(BD_CownsBD |
 							(curid << BD_RxBDID_SHIFT) |
 							RX_BUF_SIZE);
-#ifdef TC35815_USE_PACKEDBUFFER
-				lp->fbl_curid = (curid + 1) % RX_BUF_NUM;
-				if (netif_msg_rx_status(lp)) {
-					printk("%s: Entering new FBD %d\n",
-					       dev->name, lp->fbl_curid);
-					dump_frfd(lp->fbl_ptr);
-				}
-#else
 				lp->fbl_count++;
-#endif
 			}
 		}
 
@@ -1882,12 +1638,9 @@
 #endif
 	}
 
-#ifdef TC35815_NAPI
 	return received;
-#endif
 }
 
-#ifdef TC35815_NAPI
 static int tc35815_poll(struct napi_struct *napi, int budget)
 {
 	struct tc35815_local *lp = container_of(napi, struct tc35815_local, napi);
@@ -1924,13 +1677,8 @@
 	}
 	return received;
 }
-#endif
 
-#ifdef NO_CHECK_CARRIER
-#define TX_STA_ERR	(Tx_ExColl|Tx_Under|Tx_Defer|Tx_LateColl|Tx_TxPar|Tx_SQErr)
-#else
 #define TX_STA_ERR	(Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr)
-#endif
 
 static void
 tc35815_check_tx_stat(struct net_device *dev, int status)
@@ -1944,16 +1692,12 @@
 	if (status & Tx_TxColl_MASK)
 		dev->stats.collisions += status & Tx_TxColl_MASK;
 
-#ifndef NO_CHECK_CARRIER
 	/* TX4939 does not have NCarr */
 	if (lp->chiptype == TC35815_TX4939)
 		status &= ~Tx_NCarr;
-#ifdef WORKAROUND_LOSTCAR
 	/* WORKAROUND: ignore LostCrS in full duplex operation */
 	if (!lp->link || lp->duplex == DUPLEX_FULL)
 		status &= ~Tx_NCarr;
-#endif
-#endif
 
 	if (!(status & TX_STA_ERR)) {
 		/* no error. */
@@ -1983,12 +1727,10 @@
 		dev->stats.tx_fifo_errors++;
 		msg = "Excessive Deferral.";
 	}
-#ifndef NO_CHECK_CARRIER
 	if (status & Tx_NCarr) {
 		dev->stats.tx_carrier_errors++;
 		msg = "Lost Carrier Sense.";
 	}
-#endif
 	if (status & Tx_LateColl) {
 		dev->stats.tx_aborted_errors++;
 		msg = "Late Collision.";
@@ -2044,11 +1786,7 @@
 			pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE);
 			lp->tx_skbs[lp->tfd_end].skb = NULL;
 			lp->tx_skbs[lp->tfd_end].skb_dma = 0;
-#ifdef TC35815_NAPI
 			dev_kfree_skb_any(skb);
-#else
-			dev_kfree_skb_irq(skb);
-#endif
 		}
 		txfd->fd.FDSystem = cpu_to_le32(0xffffffff);
 
@@ -2083,9 +1821,7 @@
 
 				/* start DMA Transmitter again */
 				txhead->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
-#ifdef GATHER_TXINT
 				txhead->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
-#endif
 				if (netif_msg_tx_queued(lp)) {
 					printk("%s: start TxFD on queue.\n",
 					       dev->name);
@@ -2112,9 +1848,7 @@
 	struct tc35815_local *lp = netdev_priv(dev);
 
 	netif_stop_queue(dev);
-#ifdef TC35815_NAPI
 	napi_disable(&lp->napi);
-#endif
 	if (lp->phy_dev)
 		phy_stop(lp->phy_dev);
 	cancel_work_sync(&lp->restart_work);
@@ -2198,14 +1932,12 @@
 		(struct tc35815_regs __iomem *)dev->base_addr;
 
 	if (dev->flags & IFF_PROMISC) {
-#ifdef WORKAROUND_100HALF_PROMISC
 		/* With some (all?) 100MHalf HUB, controller will hang
 		 * if we enabled promiscuous mode before linkup... */
 		struct tc35815_local *lp = netdev_priv(dev);
 
 		if (!lp->link)
 			return;
-#endif
 		/* Enable promiscuous mode */
 		tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
 	} else if ((dev->flags & IFF_ALLMULTI) ||
@@ -2392,9 +2124,6 @@
 		tc_writel(DMA_BURST_SIZE | DMA_RxAlign_2, &tr->DMA_Ctl);
 	else
 		tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl);
-#ifdef TC35815_USE_PACKEDBUFFER
-	tc_writel(RxFrag_EnPack | ETH_ZLEN, &tr->RxFragSize);	/* Packing */
-#endif
 	tc_writel(0, &tr->TxPollCtr);	/* Batch mode */
 	tc_writel(TX_THRESHOLD, &tr->TxThrsh);
 	tc_writel(INT_EN_CMD, &tr->Int_En);
@@ -2412,19 +2141,12 @@
 	tc_writel(RX_CTL_CMD, &tr->Rx_Ctl);	/* start MAC receiver */
 
 	/* start MAC transmitter */
-#ifndef NO_CHECK_CARRIER
 	/* TX4939 does not have EnLCarr */
 	if (lp->chiptype == TC35815_TX4939)
 		txctl &= ~Tx_EnLCarr;
-#ifdef WORKAROUND_LOSTCAR
 	/* WORKAROUND: ignore LostCrS in full duplex operation */
 	if (!lp->phy_dev || !lp->link || lp->duplex == DUPLEX_FULL)
 		txctl &= ~Tx_EnLCarr;
-#endif
-#endif /* !NO_CHECK_CARRIER */
-#ifdef GATHER_TXINT
-	txctl &= ~Tx_EnComp;	/* disable global tx completion int. */
-#endif
 	tc_writel(txctl, &tr->Tx_Ctl);
 }
 
diff --git a/drivers/net/tehuti.c b/drivers/net/tehuti.c
index ec9dfb2..492bff6 100644
--- a/drivers/net/tehuti.c
+++ b/drivers/net/tehuti.c
@@ -1878,7 +1878,7 @@
 			udelay(50);	/* give hw a chance to clean fifo */
 			continue;
 		}
-		avail = MIN(avail, size);
+		avail = min(avail, size);
 		DBG("about to push  %d bytes starting %p size %d\n", avail,
 		    data, size);
 		bdx_tx_push_desc(priv, data, avail);
@@ -2105,12 +2105,6 @@
 }
 
 /****************** Ethtool interface *********************/
-/* get strings for tests */
-static const char
- bdx_test_names[][ETH_GSTRING_LEN] = {
-	"No tests defined"
-};
-
 /* get strings for statistics counters */
 static const char
  bdx_stat_names[][ETH_GSTRING_LEN] = {
@@ -2380,9 +2374,6 @@
 static void bdx_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 {
 	switch (stringset) {
-	case ETH_SS_TEST:
-		memcpy(data, *bdx_test_names, sizeof(bdx_test_names));
-		break;
 	case ETH_SS_STATS:
 		memcpy(data, *bdx_stat_names, sizeof(bdx_stat_names));
 		break;
@@ -2390,15 +2381,21 @@
 }
 
 /*
- * bdx_get_stats_count - return number of 64bit statistics counters
+ * bdx_get_sset_count - return number of statistics or tests
  * @netdev
  */
-static int bdx_get_stats_count(struct net_device *netdev)
+static int bdx_get_sset_count(struct net_device *netdev, int stringset)
 {
 	struct bdx_priv *priv = netdev_priv(netdev);
-	BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
-		   != sizeof(struct bdx_stats) / sizeof(u64));
-	return ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0);
+
+	switch (stringset) {
+	case ETH_SS_STATS:
+		BDX_ASSERT(ARRAY_SIZE(bdx_stat_names)
+			   != sizeof(struct bdx_stats) / sizeof(u64));
+		return ((priv->stats_flag) ? ARRAY_SIZE(bdx_stat_names)	: 0);
+	default:
+		return -EINVAL;
+	}
 }
 
 /*
@@ -2441,7 +2438,7 @@
 		.get_sg = ethtool_op_get_sg,
 		.get_tso = ethtool_op_get_tso,
 		.get_strings = bdx_get_strings,
-		.get_stats_count = bdx_get_stats_count,
+		.get_sset_count = bdx_get_sset_count,
 		.get_ethtool_stats = bdx_get_ethtool_stats,
 	};
 
diff --git a/drivers/net/tehuti.h b/drivers/net/tehuti.h
index 4fc875e..1241419 100644
--- a/drivers/net/tehuti.h
+++ b/drivers/net/tehuti.h
@@ -76,8 +76,6 @@
 #define FIFO_SIZE  4096
 #define FIFO_EXTRA_SPACE            1024
 
-#define MIN(x, y)  ((x) < (y) ? (x) : (y))
-
 #if BITS_PER_LONG == 64
 #    define H32_64(x)  (u32) ((u64)(x) >> 32)
 #    define L32_64(x)  (u32) ((u64)(x) & 0xffffffff)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ba5d3fe..47a4f09 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -68,8 +68,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.102"
-#define DRV_MODULE_RELDATE	"September 1, 2009"
+#define DRV_MODULE_VERSION	"3.103"
+#define DRV_MODULE_RELDATE	"November 2, 2009"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -937,9 +937,10 @@
 	u32 val;
 	struct phy_device *phydev;
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
 	case TG3_PHY_ID_BCM50610:
+	case TG3_PHY_ID_BCM50610M:
 		val = MAC_PHYCFG2_50610_LED_MODES;
 		break;
 	case TG3_PHY_ID_BCMAC131:
@@ -1031,7 +1032,7 @@
 		if (is_serdes)
 			tp->phy_addr += 7;
 	} else
-		tp->phy_addr = PHY_ADDR;
+		tp->phy_addr = TG3_PHY_MII_ADDR;
 
 	if ((tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
@@ -1062,7 +1063,7 @@
 	tp->mdio_bus->read     = &tg3_mdio_read;
 	tp->mdio_bus->write    = &tg3_mdio_write;
 	tp->mdio_bus->reset    = &tg3_mdio_reset;
-	tp->mdio_bus->phy_mask = ~(1 << PHY_ADDR);
+	tp->mdio_bus->phy_mask = ~(1 << TG3_PHY_MII_ADDR);
 	tp->mdio_bus->irq      = &tp->mdio_irq[0];
 
 	for (i = 0; i < PHY_MAX_ADDR; i++)
@@ -1084,7 +1085,7 @@
 		return i;
 	}
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	if (!phydev || !phydev->drv) {
 		printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
@@ -1096,8 +1097,14 @@
 	switch (phydev->drv->phy_id & phydev->drv->phy_id_mask) {
 	case TG3_PHY_ID_BCM57780:
 		phydev->interface = PHY_INTERFACE_MODE_GMII;
+		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		break;
 	case TG3_PHY_ID_BCM50610:
+	case TG3_PHY_ID_BCM50610M:
+		phydev->dev_flags |= PHY_BRCM_CLEAR_RGMII_MODE |
+				     PHY_BRCM_RX_REFCLK_UNUSED |
+				     PHY_BRCM_DIS_TXCRXC_NOENRGY |
+				     PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_STD_IBND_DISABLE)
 			phydev->dev_flags |= PHY_BRCM_STD_IBND_DISABLE;
 		if (tp->tg3_flags3 & TG3_FLG3_RGMII_EXT_IBND_RX_EN)
@@ -1111,6 +1118,7 @@
 	case TG3_PHY_ID_RTL8201E:
 	case TG3_PHY_ID_BCMAC131:
 		phydev->interface = PHY_INTERFACE_MODE_MII;
+		phydev->dev_flags |= PHY_BRCM_AUTO_PWRDWN_ENABLE;
 		tp->tg3_flags3 |= TG3_FLG3_PHY_IS_FET;
 		break;
 	}
@@ -1311,7 +1319,7 @@
 	u32 old_tx_mode = tp->tx_mode;
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB)
-		autoneg = tp->mdio_bus->phy_map[PHY_ADDR]->autoneg;
+		autoneg = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]->autoneg;
 	else
 		autoneg = tp->link_config.autoneg;
 
@@ -1348,7 +1356,7 @@
 	u8 oldflowctrl, linkmesg = 0;
 	u32 mac_mode, lcl_adv, rmt_adv;
 	struct tg3 *tp = netdev_priv(dev);
-	struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	struct phy_device *phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	spin_lock_bh(&tp->lock);
 
@@ -1363,8 +1371,11 @@
 
 		if (phydev->speed == SPEED_100 || phydev->speed == SPEED_10)
 			mac_mode |= MAC_MODE_PORT_MODE_MII;
-		else
+		else if (phydev->speed == SPEED_1000 ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785)
 			mac_mode |= MAC_MODE_PORT_MODE_GMII;
+		else
+			mac_mode |= MAC_MODE_PORT_MODE_MII;
 
 		if (phydev->duplex == DUPLEX_HALF)
 			mac_mode |= MAC_MODE_HALF_DUPLEX;
@@ -1434,7 +1445,7 @@
 	/* Bring the PHY back to a known state. */
 	tg3_bmcr_reset(tp);
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	/* Attach the MAC to the PHY. */
 	phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
@@ -1461,7 +1472,7 @@
 				      SUPPORTED_Asym_Pause);
 		break;
 	default:
-		phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
+		phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 		return -EINVAL;
 	}
 
@@ -1479,7 +1490,7 @@
 	if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 		return;
 
-	phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+	phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 	if (tp->link_config.phy_is_low_power) {
 		tp->link_config.phy_is_low_power = 0;
@@ -1499,13 +1510,13 @@
 	if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 		return;
 
-	phy_stop(tp->mdio_bus->phy_map[PHY_ADDR]);
+	phy_stop(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 }
 
 static void tg3_phy_fini(struct tg3 *tp)
 {
 	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
-		phy_disconnect(tp->mdio_bus->phy_map[PHY_ADDR]);
+		phy_disconnect(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 		tp->tg3_flags3 &= ~TG3_FLG3_PHY_CONNECTED;
 	}
 }
@@ -2149,6 +2160,26 @@
 		tw32_f(GRC_MISC_CFG, val | GRC_MISC_CFG_EPHY_IDDQ);
 		udelay(40);
 		return;
+	} else if (tp->tg3_flags3 & TG3_FLG3_PHY_IS_FET) {
+		u32 phytest;
+		if (!tg3_readphy(tp, MII_TG3_FET_TEST, &phytest)) {
+			u32 phy;
+
+			tg3_writephy(tp, MII_ADVERTISE, 0);
+			tg3_writephy(tp, MII_BMCR,
+				     BMCR_ANENABLE | BMCR_ANRESTART);
+
+			tg3_writephy(tp, MII_TG3_FET_TEST,
+				     phytest | MII_TG3_FET_SHADOW_EN);
+			if (!tg3_readphy(tp, MII_TG3_FET_SHDW_AUXMODE4, &phy)) {
+				phy |= MII_TG3_FET_SHDW_AUXMODE4_SBPD;
+				tg3_writephy(tp,
+					     MII_TG3_FET_SHDW_AUXMODE4,
+					     phy);
+			}
+			tg3_writephy(tp, MII_TG3_FET_TEST, phytest);
+		}
+		return;
 	} else if (do_low_power) {
 		tg3_writephy(tp, MII_TG3_EXT_CTRL,
 			     MII_TG3_EXT_CTRL_FORCE_LED_OFF);
@@ -2474,7 +2505,7 @@
 			struct phy_device *phydev;
 			u32 phyid, advertising;
 
-			phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+			phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 			tp->link_config.phy_is_low_power = 1;
 
@@ -3243,15 +3274,6 @@
 			pci_write_config_word(tp->pdev,
 					      tp->pcie_cap + PCI_EXP_LNKCTL,
 					      newlnkctl);
-	} else if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
-		u32 newreg, oldreg = tr32(TG3_PCIE_LNKCTL);
-		if (tp->link_config.active_speed == SPEED_100 ||
-		    tp->link_config.active_speed == SPEED_10)
-			newreg = oldreg & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
-		else
-			newreg = oldreg | TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
-		if (newreg != oldreg)
-			tw32(TG3_PCIE_LNKCTL, newreg);
 	}
 
 	if (current_link_up != netif_carrier_ok(tp->dev)) {
@@ -4435,6 +4457,10 @@
 
 	mapping = pci_map_single(tp->pdev, skb->data, skb_size,
 				 PCI_DMA_FROMDEVICE);
+	if (pci_dma_mapping_error(tp->pdev, mapping)) {
+		dev_kfree_skb(skb);
+		return -EIO;
+	}
 
 	map->skb = skb;
 	pci_unmap_addr_set(map, mapping, mapping);
@@ -5124,7 +5150,8 @@
 		/* Make sure new skb does not cross any 4G boundaries.
 		 * Drop the packet if it does.
 		 */
-		if (ret || tg3_4g_overflow_test(new_addr, new_skb->len)) {
+		if (ret || ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+			    tg3_4g_overflow_test(new_addr, new_skb->len))) {
 			if (!ret)
 				skb_dma_unmap(&tp->pdev->dev, new_skb,
 					      DMA_TO_DEVICE);
@@ -5392,7 +5419,7 @@
 	mss = 0;
 	if ((mss = skb_shinfo(skb)->gso_size) != 0) {
 		struct iphdr *iph;
-		int tcp_opt_len, ip_tcp_len, hdr_len;
+		u32 tcp_opt_len, ip_tcp_len, hdr_len;
 
 		if (skb_header_cloned(skb) &&
 		    pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) {
@@ -5423,8 +5450,10 @@
 								 IPPROTO_TCP,
 								 0);
 
-		if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO) ||
-		    (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705)) {
+		if (tp->tg3_flags2 & TG3_FLG2_HW_TSO_2)
+			mss |= hdr_len << 9;
+		else if ((tp->tg3_flags2 & TG3_FLG2_HW_TSO_1) ||
+			 GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) {
 			if (tcp_opt_len || iph->ihl > 5) {
 				int tsflags;
 
@@ -5459,9 +5488,18 @@
 
 	would_hit_hwbug = 0;
 
-	if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
+	if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) && len <= 8)
 		would_hit_hwbug = 1;
-	else if (tg3_4g_overflow_test(mapping, len))
+
+	if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+	    tg3_4g_overflow_test(mapping, len))
+		would_hit_hwbug = 1;
+
+	if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+	    tg3_40bit_overflow_test(tp, mapping, len))
+		would_hit_hwbug = 1;
+
+	if (tp->tg3_flags3 & TG3_FLG3_5701_DMA_BUG)
 		would_hit_hwbug = 1;
 
 	tg3_set_txd(tnapi, entry, mapping, len, base_flags,
@@ -5482,10 +5520,16 @@
 
 			tnapi->tx_buffers[entry].skb = NULL;
 
-			if (tg3_4g_overflow_test(mapping, len))
+			if ((tp->tg3_flags3 & TG3_FLG3_SHORT_DMA_BUG) &&
+			    len <= 8)
 				would_hit_hwbug = 1;
 
-			if (tg3_40bit_overflow_test(tp, mapping, len))
+			if ((tp->tg3_flags3 & TG3_FLG3_4G_DMA_BNDRY_BUG) &&
+			    tg3_4g_overflow_test(mapping, len))
+				would_hit_hwbug = 1;
+
+			if ((tp->tg3_flags3 & TG3_FLG3_40BIT_DMA_LIMIT_BUG) &&
+			    tg3_40bit_overflow_test(tp, mapping, len))
 				would_hit_hwbug = 1;
 
 			if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
@@ -6580,6 +6624,30 @@
 
 	tg3_mdio_start(tp);
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780) {
+		u8 phy_addr;
+
+		phy_addr = tp->phy_addr;
+		tp->phy_addr = TG3_PHY_PCIE_ADDR;
+
+		tg3_writephy(tp, TG3_PCIEPHY_BLOCK_ADDR,
+			     TG3_PCIEPHY_TXB_BLK << TG3_PCIEPHY_BLOCK_SHIFT);
+		val = TG3_PCIEPHY_TX0CTRL1_TXOCM | TG3_PCIEPHY_TX0CTRL1_RDCTL |
+		      TG3_PCIEPHY_TX0CTRL1_TXCMV | TG3_PCIEPHY_TX0CTRL1_TKSEL |
+		      TG3_PCIEPHY_TX0CTRL1_NB_EN;
+		tg3_writephy(tp, TG3_PCIEPHY_TX0CTRL1, val);
+		udelay(10);
+
+		tg3_writephy(tp, TG3_PCIEPHY_BLOCK_ADDR,
+			     TG3_PCIEPHY_XGXS_BLK1 << TG3_PCIEPHY_BLOCK_SHIFT);
+		val = TG3_PCIEPHY_PWRMGMT4_LOWPWR_EN |
+		      TG3_PCIEPHY_PWRMGMT4_L1PLLPD_EN;
+		tg3_writephy(tp, TG3_PCIEPHY_PWRMGMT4, val);
+		udelay(10);
+
+		tp->phy_addr = phy_addr;
+	}
+
 	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5750_A0 &&
 	    GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5785 &&
@@ -7162,15 +7230,9 @@
 		tw32(TG3_PCIE_EIDLE_DELAY, val | TG3_PCIE_EIDLE_DELAY_13_CLKS);
 
 		tw32(TG3_CORR_ERR_STAT, TG3_CORR_ERR_STAT_CLEAR);
-	}
 
-	if (tp->tg3_flags3 & TG3_FLG3_TOGGLE_10_100_L1PLLPD) {
-		val = tr32(TG3_PCIE_LNKCTL);
-		if (tp->tg3_flags3 & TG3_FLG3_CLKREQ_BUG)
-			val |= TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
-		else
-			val &= ~TG3_PCIE_LNKCTL_L1_PLL_PD_DIS;
-		tw32(TG3_PCIE_LNKCTL, val);
+		val = tr32(TG3_PCIE_LNKCTL) & ~TG3_PCIE_LNKCTL_L1_PLL_PD_EN;
+		tw32(TG3_PCIE_LNKCTL, val | TG3_PCIE_LNKCTL_L1_PLL_PD_DIS);
 	}
 
 	/* This works around an issue with Athlon chipsets on
@@ -7602,6 +7664,9 @@
 	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
 		val |= WDMAC_MODE_STATUS_TAG_FIX;
 
+	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5785)
+		val |= WDMAC_MODE_BURST_ALL_DATA;
+
 	tw32_f(WDMAC_MODE, val);
 	udelay(40);
 
@@ -9240,9 +9305,11 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_ethtool_gset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_ethtool_gset(phydev, cmd);
 	}
 
 	cmd->supported = (SUPPORTED_Autoneg);
@@ -9281,9 +9348,11 @@
 	struct tg3 *tp = netdev_priv(dev);
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_ethtool_sset(tp->mdio_bus->phy_map[PHY_ADDR], cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_ethtool_sset(phydev, cmd);
 	}
 
 	if (cmd->autoneg != AUTONEG_ENABLE &&
@@ -9466,7 +9535,7 @@
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		r = phy_start_aneg(tp->mdio_bus->phy_map[PHY_ADDR]);
+		r = phy_start_aneg(tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR]);
 	} else {
 		u32 bmcr;
 
@@ -9585,7 +9654,7 @@
 			u32 newadv;
 			struct phy_device *phydev;
 
-			phydev = tp->mdio_bus->phy_map[PHY_ADDR];
+			phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 
 			if (epause->rx_pause) {
 				if (epause->tx_pause)
@@ -10338,7 +10407,10 @@
 	for (i = 14; i < tx_len; i++)
 		tx_data[i] = (u8) (i & 0xff);
 
-	map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE);
+	if (skb_dma_map(&tp->pdev->dev, skb, DMA_TO_DEVICE)) {
+		dev_kfree_skb(skb);
+		return -EIO;
+	}
 
 	tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
 	       rnapi->coal_now);
@@ -10349,7 +10421,8 @@
 
 	num_pkts = 0;
 
-	tg3_set_txd(tnapi, tnapi->tx_prod, map, tx_len, 0, 1);
+	tg3_set_txd(tnapi, tnapi->tx_prod,
+		    skb_shinfo(skb)->dma_head, tx_len, 0, 1);
 
 	tnapi->tx_prod++;
 	num_pkts++;
@@ -10359,8 +10432,8 @@
 
 	udelay(10);
 
-	/* 250 usec to allow enough time on some 10/100 Mbps devices.  */
-	for (i = 0; i < 25; i++) {
+	/* 350 usec to allow enough time on some 10/100 Mbps devices.  */
+	for (i = 0; i < 35; i++) {
 		tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE |
 		       coal_now);
 
@@ -10373,7 +10446,7 @@
 			break;
 	}
 
-	pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE);
+	skb_dma_unmap(&tp->pdev->dev, skb, DMA_TO_DEVICE);
 	dev_kfree_skb(skb);
 
 	if (tx_idx != tnapi->tx_prod)
@@ -10565,9 +10638,11 @@
 	int err;
 
 	if (tp->tg3_flags3 & TG3_FLG3_USE_PHYLIB) {
+		struct phy_device *phydev;
 		if (!(tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED))
 			return -EAGAIN;
-		return phy_mii_ioctl(tp->mdio_bus->phy_map[PHY_ADDR], data, cmd);
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
+		return phy_mii_ioctl(phydev, data, cmd);
 	}
 
 	switch(cmd) {
@@ -12610,12 +12685,19 @@
 
 	tp->irq_max = 1;
 
-#ifdef TG3_NAPI
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5717) {
 		tp->tg3_flags |= TG3_FLAG_SUPPORT_MSIX;
 		tp->irq_max = TG3_IRQ_MAX_VECS;
 	}
-#endif
+
+	if (!(tp->tg3_flags3 & TG3_FLG3_5755_PLUS)) {
+		if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+			tp->tg3_flags3 |= TG3_FLG3_SHORT_DMA_BUG;
+		else {
+			tp->tg3_flags3 |= TG3_FLG3_4G_DMA_BNDRY_BUG;
+			tp->tg3_flags3 |= TG3_FLG3_40BIT_DMA_LIMIT_BUG;
+		}
+	}
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
 	     (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) ||
@@ -12926,11 +13008,6 @@
 	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_57780)
 		tp->tg3_flags3 |= TG3_FLG3_USE_PHYLIB;
 
-	if ((tp->pci_chip_rev_id == CHIPREV_ID_57780_A1 &&
-	     tr32(RCVLPC_STATS_ENABLE) & RCVLPC_STATSENAB_ASF_FIX) ||
-	    tp->pci_chip_rev_id == CHIPREV_ID_57780_A0)
-		tp->tg3_flags3 |= TG3_FLG3_TOGGLE_10_100_L1PLLPD;
-
 	err = tg3_mdio_init(tp);
 	if (err)
 		return err;
@@ -13975,8 +14052,7 @@
 		goto err_out_iounmap;
 	}
 
-	if ((tp->tg3_flags3 & TG3_FLG3_5755_PLUS) ||
-	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
+	if (tp->tg3_flags3 & TG3_FLG3_5755_PLUS)
 		dev->netdev_ops = &tg3_netdev_ops;
 	else
 		dev->netdev_ops = &tg3_netdev_ops_dma_bug;
@@ -14131,13 +14207,14 @@
 	       tg3_bus_string(tp, str),
 	       dev->dev_addr);
 
-	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED)
+	if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
+		struct phy_device *phydev;
+		phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
 		printk(KERN_INFO
 		       "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
-		       tp->dev->name,
-		       tp->mdio_bus->phy_map[PHY_ADDR]->drv->name,
-		       dev_name(&tp->mdio_bus->phy_map[PHY_ADDR]->dev));
-	else
+		       tp->dev->name, phydev->drv->name,
+		       dev_name(&phydev->dev));
+	} else
 		printk(KERN_INFO
 		       "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
 		       tp->dev->name, tg3_phy_string(tp),
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index bab7940..d770da1 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -1264,8 +1264,9 @@
 #define  WDMAC_MODE_FIFOURUN_ENAB	 0x00000080
 #define  WDMAC_MODE_FIFOOREAD_ENAB	 0x00000100
 #define  WDMAC_MODE_LNGREAD_ENAB	 0x00000200
-#define  WDMAC_MODE_RX_ACCEL	 	 0x00000400
+#define  WDMAC_MODE_RX_ACCEL		 0x00000400
 #define  WDMAC_MODE_STATUS_TAG_FIX	 0x20000000
+#define  WDMAC_MODE_BURST_ALL_DATA	 0xc0000000
 #define WDMAC_STATUS			0x00004c04
 #define  WDMAC_STATUS_TGTABORT		 0x00000004
 #define  WDMAC_STATUS_MSTABORT		 0x00000008
@@ -1953,10 +1954,34 @@
 #define  NIC_SRAM_MBUF_POOL_BASE5705	0x00010000
 #define  NIC_SRAM_MBUF_POOL_SIZE5705	0x0000e000
 
-/* Currently this is fixed. */
-#define PHY_ADDR		0x01
 
-/* Tigon3 specific PHY MII registers. */
+/* Currently this is fixed. */
+#define TG3_PHY_PCIE_ADDR		0x00
+#define TG3_PHY_MII_ADDR		0x01
+
+
+/*** Tigon3 specific PHY PCIE registers. ***/
+
+#define TG3_PCIEPHY_BLOCK_ADDR		0x1f
+#define  TG3_PCIEPHY_XGXS_BLK1		0x0801
+#define  TG3_PCIEPHY_TXB_BLK		0x0861
+#define  TG3_PCIEPHY_BLOCK_SHIFT	4
+
+/* TG3_PCIEPHY_TXB_BLK */
+#define TG3_PCIEPHY_TX0CTRL1		0x15
+#define  TG3_PCIEPHY_TX0CTRL1_TXOCM	0x0003
+#define  TG3_PCIEPHY_TX0CTRL1_RDCTL	0x0008
+#define  TG3_PCIEPHY_TX0CTRL1_TXCMV	0x0030
+#define  TG3_PCIEPHY_TX0CTRL1_TKSEL	0x0040
+#define  TG3_PCIEPHY_TX0CTRL1_NB_EN	0x0400
+
+/* TG3_PCIEPHY_XGXS_BLK1 */
+#define TG3_PCIEPHY_PWRMGMT4		0x1a
+#define TG3_PCIEPHY_PWRMGMT4_L1PLLPD_EN	0x0038
+#define TG3_PCIEPHY_PWRMGMT4_LOWPWR_EN	0x4000
+
+
+/*** Tigon3 specific PHY MII registers. ***/
 #define  TG3_BMCR_SPEED1000		0x0040
 
 #define MII_TG3_CTRL			0x09 /* 1000-baseT control register */
@@ -2055,6 +2080,9 @@
 #define MII_TG3_FET_SHDW_MISCCTRL	0x10
 #define  MII_TG3_FET_SHDW_MISCCTRL_MDIX	0x4000
 
+#define MII_TG3_FET_SHDW_AUXMODE4	0x1a
+#define MII_TG3_FET_SHDW_AUXMODE4_SBPD	0x0008
+
 #define MII_TG3_FET_SHDW_AUXSTAT2	0x1b
 #define  MII_TG3_FET_SHDW_AUXSTAT2_APD	0x0020
 
@@ -2756,9 +2784,11 @@
 #define TG3_FLG3_PHY_ENABLE_APD		0x00001000
 #define TG3_FLG3_5755_PLUS		0x00002000
 #define TG3_FLG3_NO_NVRAM		0x00004000
-#define TG3_FLG3_TOGGLE_10_100_L1PLLPD	0x00008000
 #define TG3_FLG3_PHY_IS_FET		0x00010000
 #define TG3_FLG3_ENABLE_RSS		0x00020000
+#define TG3_FLG3_4G_DMA_BNDRY_BUG	0x00080000
+#define TG3_FLG3_40BIT_DMA_LIMIT_BUG	0x00100000
+#define TG3_FLG3_SHORT_DMA_BUG		0x00200000
 
 	struct timer_list		timer;
 	u16				timer_counter;
@@ -2834,6 +2864,7 @@
 #define PHY_REV_BCM5401_C0		0x6
 #define PHY_REV_BCM5411_X0		0x1 /* Found on Netgear GA302T */
 #define TG3_PHY_ID_BCM50610		0x143bd60
+#define TG3_PHY_ID_BCM50610M	0x143bd70
 #define TG3_PHY_ID_BCMAC131		0x143bc70
 #define TG3_PHY_ID_RTL8211C		0x001cc910
 #define TG3_PHY_ID_RTL8201E		0x00008200
diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c
index 3d31b47..16f23f8 100644
--- a/drivers/net/tlan.c
+++ b/drivers/net/tlan.c
@@ -1549,7 +1549,8 @@
 		if (tmpCStat & TLAN_CSTAT_EOC)
 			eoc = 1;
 
-		new_skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+		new_skb = netdev_alloc_skb_ip_align(dev,
+						    TLAN_MAX_FRAME_SIZE + 5);
 		if ( !new_skb )
 			goto drop_and_reuse;
 
@@ -1563,7 +1564,6 @@
 		skb->protocol = eth_type_trans( skb, dev );
 		netif_rx( skb );
 
-		skb_reserve( new_skb, NET_IP_ALIGN );
 		head_list->buffer[0].address = pci_map_single(priv->pciDev,
 							      new_skb->data,
 							      TLAN_MAX_FRAME_SIZE,
@@ -1967,13 +1967,12 @@
 		list->cStat = TLAN_CSTAT_READY;
 		list->frameSize = TLAN_MAX_FRAME_SIZE;
 		list->buffer[0].count = TLAN_MAX_FRAME_SIZE | TLAN_LAST_BUFFER;
-		skb = netdev_alloc_skb(dev, TLAN_MAX_FRAME_SIZE + 7 );
+		skb = netdev_alloc_skb_ip_align(dev, TLAN_MAX_FRAME_SIZE + 5);
 		if ( !skb ) {
 			pr_err("TLAN: out of memory for received data.\n" );
 			break;
 		}
 
-		skb_reserve( skb, NET_IP_ALIGN );
 		list->buffer[0].address = pci_map_single(priv->pciDev,
 							 skb->data,
 							 TLAN_MAX_FRAME_SIZE,
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/tsi108_eth.c
index 7030bd5..a69c4a4 100644
--- a/drivers/net/tsi108_eth.c
+++ b/drivers/net/tsi108_eth.c
@@ -802,13 +802,11 @@
 		int rx = data->rxhead;
 		struct sk_buff *skb;
 
-		data->rxskbs[rx] = skb = netdev_alloc_skb(dev,
-							  TSI108_RXBUF_SIZE + 2);
+		skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
+		data->rxskbs[rx] = skb;
 		if (!skb)
 			break;
 
-		skb_reserve(skb, 2); /* Align the data on a 4-byte boundary. */
-
 		data->rxring[rx].buf0 = dma_map_single(NULL, skb->data,
 							TSI108_RX_SKB_SIZE,
 							DMA_FROM_DEVICE);
@@ -1356,7 +1354,7 @@
 	for (i = 0; i < TSI108_RXRING_LEN; i++) {
 		struct sk_buff *skb;
 
-		skb = netdev_alloc_skb(dev, TSI108_RXBUF_SIZE + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(dev, TSI108_RXBUF_SIZE);
 		if (!skb) {
 			/* Bah.  No memory for now, but maybe we'll get
 			 * some more later.
@@ -1370,8 +1368,6 @@
 		}
 
 		data->rxskbs[i] = skb;
-		/* Align the payload on a 4-byte boundary */
-		skb_reserve(skb, 2);
 		data->rxskbs[i] = skb;
 		data->rxring[i].buf0 = virt_to_phys(data->rxskbs[i]->data);
 		data->rxring[i].misc = TSI108_RX_OWN | TSI108_RX_INT;
diff --git a/drivers/net/tun.c b/drivers/net/tun.c
index 4fdfa2a..9c59a82 100644
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -44,7 +44,6 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/slab.h>
-#include <linux/smp_lock.h>
 #include <linux/poll.h>
 #include <linux/fcntl.h>
 #include <linux/init.h>
@@ -1285,7 +1284,6 @@
 
 	DBG(KERN_INFO "%s: tun_chr_fasync %d\n", tun->dev->name, on);
 
-	lock_kernel();
 	if ((ret = fasync_helper(fd, file, on, &tun->fasync)) < 0)
 		goto out;
 
@@ -1298,7 +1296,6 @@
 		tun->flags &= ~TUN_FASYNC;
 	ret = 0;
 out:
-	unlock_kernel();
 	tun_put(tun);
 	return ret;
 }
@@ -1306,7 +1303,7 @@
 static int tun_chr_open(struct inode *inode, struct file * file)
 {
 	struct tun_file *tfile;
-	cycle_kernel_lock();
+
 	DBG1(KERN_INFO "tunX: tun_chr_open\n");
 
 	tfile = kmalloc(sizeof(*tfile), GFP_KERNEL);
diff --git a/drivers/net/usb/cdc_ether.c b/drivers/net/usb/cdc_ether.c
index 21e1ba1..71d7ff3 100644
--- a/drivers/net/usb/cdc_ether.c
+++ b/drivers/net/usb/cdc_ether.c
@@ -420,6 +420,14 @@
 	.status =	cdc_status,
 };
 
+static const struct driver_info mbm_info = {
+	.description =	"Mobile Broadband Network Device",
+	.flags =	FLAG_WWAN,
+	.bind = 	cdc_bind,
+	.unbind =	usbnet_cdc_unbind,
+	.status =	cdc_status,
+};
+
 /*-------------------------------------------------------------------------*/
 
 
@@ -532,72 +540,72 @@
 	/* Ericsson F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1900, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3507g ver. 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1902, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1904, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1905, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3607gw ver 3 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1906, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3307 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x190a, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson F3307 ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1909, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Ericsson C3607w */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0bdb, 0x1049, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130b, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x130c, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Toshiba F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x0930, 0x1311, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3507g */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8147, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3607gw */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8183, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 }, {
 	/* Dell F3607gw ver 2 */
 	USB_DEVICE_AND_INTERFACE_INFO(0x413c, 0x8184, USB_CLASS_COMM,
 			USB_CDC_SUBCLASS_MDLM, USB_CDC_PROTO_NONE),
-	.driver_info = (unsigned long) &cdc_info,
+	.driver_info = (unsigned long) &mbm_info,
 },
 	{ },		// END
 };
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index e391ef9..3b80e8d 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -471,16 +471,7 @@
 	int result;
 
 	dbg("kaweth_reset(%p)", kaweth);
-	result = kaweth_control(kaweth,
-				usb_sndctrlpipe(kaweth->dev, 0),
-				USB_REQ_SET_CONFIGURATION,
-				0,
-				kaweth->dev->config[0].desc.bConfigurationValue,
-				0,
-				NULL,
-				0,
-				KAWETH_CONTROL_TIMEOUT);
-
+	result = usb_reset_configuration(kaweth->dev);
 	mdelay(10);
 
 	dbg("kaweth_reset() returns %d.",result);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ca5ca5a..378da8c 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1210,6 +1210,14 @@
 
 // precondition: never called in_interrupt
 
+static struct device_type wlan_type = {
+	.name	= "wlan",
+};
+
+static struct device_type wwan_type = {
+	.name	= "wwan",
+};
+
 int
 usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 {
@@ -1295,6 +1303,9 @@
 		/* WLAN devices should always be named "wlan%d" */
 		if ((dev->driver_info->flags & FLAG_WLAN) != 0)
 			strcpy(net->name, "wlan%d");
+		/* WWAN devices should always be named "wwan%d" */
+		if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+			strcpy(net->name, "wwan%d");
 
 		/* maybe the remote can't receive an Ethernet MTU */
 		if (net->mtu > (dev->hard_mtu - net->hard_header_len))
@@ -1322,6 +1333,12 @@
 	dev->maxpacket = usb_maxpacket (dev->udev, dev->out, 1);
 
 	SET_NETDEV_DEV(net, &udev->dev);
+
+	if ((dev->driver_info->flags & FLAG_WLAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wlan_type);
+	if ((dev->driver_info->flags & FLAG_WWAN) != 0)
+		SET_NETDEV_DEVTYPE(net, &wwan_type);
+
 	status = register_netdev (net);
 	if (status)
 		goto out3;
diff --git a/drivers/net/veth.c b/drivers/net/veth.c
index ade5b34..9bed694cd 100644
--- a/drivers/net/veth.c
+++ b/drivers/net/veth.c
@@ -442,7 +442,7 @@
 	return err;
 }
 
-static void veth_dellink(struct net_device *dev)
+static void veth_dellink(struct net_device *dev, struct list_head *head)
 {
 	struct veth_priv *priv;
 	struct net_device *peer;
@@ -450,8 +450,8 @@
 	priv = netdev_priv(dev);
 	peer = priv->peer;
 
-	unregister_netdevice(dev);
-	unregister_netdevice(peer);
+	unregister_netdevice_queue(dev, head);
+	unregister_netdevice_queue(peer, head);
 }
 
 static const struct nla_policy veth_policy[VETH_INFO_MAX + 1];
diff --git a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
index 1fd7058..4535e89 100644
--- a/drivers/net/via-rhine.c
+++ b/drivers/net/via-rhine.c
@@ -1484,15 +1484,15 @@
 				}
 			}
 		} else {
-			struct sk_buff *skb;
+			struct sk_buff *skb = NULL;
 			/* Length should omit the CRC */
 			int pkt_len = data_size - 4;
 
 			/* Check if the packet is long enough to accept without
 			   copying to a minimally-sized skbuff. */
-			if (pkt_len < rx_copybreak &&
-				(skb = netdev_alloc_skb(dev, pkt_len + NET_IP_ALIGN)) != NULL) {
-				skb_reserve(skb, NET_IP_ALIGN);	/* 16 byte align the IP header */
+			if (pkt_len < rx_copybreak)
+				skb = netdev_alloc_skb_ip_align(dev, pkt_len);
+			if (skb) {
 				pci_dma_sync_single_for_cpu(rp->pdev,
 							    rp->rx_skbuff_dma[entry],
 							    rp->rx_buf_sz,
diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index e04e5be..158f411 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -364,11 +364,6 @@
 module_param(rx_copybreak, int, 0644);
 MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
 
-#ifdef CONFIG_PM
-static DEFINE_SPINLOCK(velocity_dev_list_lock);
-static LIST_HEAD(velocity_dev_list);
-#endif
-
 /*
  *	Internal board variants. At the moment we have only one
  */
@@ -417,14 +412,6 @@
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct velocity_info *vptr = netdev_priv(dev);
 
-#ifdef CONFIG_PM
-	unsigned long flags;
-
-	spin_lock_irqsave(&velocity_dev_list_lock, flags);
-	if (!list_empty(&velocity_dev_list))
-		list_del(&vptr->list);
-	spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-#endif
 	unregister_netdev(dev);
 	iounmap(vptr->mac_regs);
 	pci_release_regions(pdev);
@@ -1949,10 +1936,9 @@
 	if (pkt_size < rx_copybreak) {
 		struct sk_buff *new_skb;
 
-		new_skb = netdev_alloc_skb(vptr->dev, pkt_size + 2);
+		new_skb = netdev_alloc_skb_ip_align(vptr->dev, pkt_size);
 		if (new_skb) {
 			new_skb->ip_summed = rx_skb[0]->ip_summed;
-			skb_reserve(new_skb, 2);
 			skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
 			*rx_skb = new_skb;
 			ret = 0;
@@ -2578,7 +2564,6 @@
 	vptr->tx.numq = info->txqueue;
 	vptr->multicast_limit = MCAM_SIZE;
 	spin_lock_init(&vptr->lock);
-	INIT_LIST_HEAD(&vptr->list);
 }
 
 /**
@@ -2777,15 +2762,6 @@
 	/* and leave the chip powered down */
 
 	pci_set_power_state(pdev, PCI_D3hot);
-#ifdef CONFIG_PM
-	{
-		unsigned long flags;
-
-		spin_lock_irqsave(&velocity_dev_list_lock, flags);
-		list_add(&vptr->list, &velocity_dev_list);
-		spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
-	}
-#endif
 	velocity_nics++;
 out:
 	return ret;
@@ -3241,20 +3217,10 @@
 {
 	struct in_ifaddr *ifa = (struct in_ifaddr *) ptr;
 	struct net_device *dev = ifa->ifa_dev->dev;
-	struct velocity_info *vptr;
-	unsigned long flags;
 
-	if (dev_net(dev) != &init_net)
-		return NOTIFY_DONE;
-
-	spin_lock_irqsave(&velocity_dev_list_lock, flags);
-	list_for_each_entry(vptr, &velocity_dev_list, list) {
-		if (vptr->dev == dev) {
-			velocity_get_ip(vptr);
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&velocity_dev_list_lock, flags);
+	if (dev_net(dev) == &init_net &&
+	    dev->netdev_ops == &velocity_netdev_ops)
+		velocity_get_ip(netdev_priv(dev));
 
 	return NOTIFY_DONE;
 }
diff --git a/drivers/net/via-velocity.h b/drivers/net/via-velocity.h
index 2f00c13..ce894ff 100644
--- a/drivers/net/via-velocity.h
+++ b/drivers/net/via-velocity.h
@@ -1499,8 +1499,6 @@
 #define GET_RD_BY_IDX(vptr, idx)   (vptr->rd_ring[idx])
 
 struct velocity_info {
-	struct list_head list;
-
 	struct pci_dev *pdev;
 	struct net_device *dev;
 
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index bb8b52d..22a8ca5 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -283,13 +283,12 @@
 	do {
 		struct skb_vnet_hdr *hdr;
 
-		skb = netdev_alloc_skb(vi->dev, MAX_PACKET_LEN + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(vi->dev, MAX_PACKET_LEN);
 		if (unlikely(!skb)) {
 			oom = true;
 			break;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
 		skb_put(skb, MAX_PACKET_LEN);
 
 		hdr = skb_vnet_hdr(skb);
@@ -344,14 +343,12 @@
 	do {
 		skb_frag_t *f;
 
-		skb = netdev_alloc_skb(vi->dev, GOOD_COPY_LEN + NET_IP_ALIGN);
+		skb = netdev_alloc_skb_ip_align(vi->dev, GOOD_COPY_LEN);
 		if (unlikely(!skb)) {
 			oom = true;
 			break;
 		}
 
-		skb_reserve(skb, NET_IP_ALIGN);
-
 		f = &skb_shinfo(skb)->frags[0];
 		f->page = get_a_page(vi, gfp);
 		if (!f->page) {
diff --git a/drivers/net/vmxnet3/vmxnet3_int.h b/drivers/net/vmxnet3/vmxnet3_int.h
index 3c0d70d..4450816 100644
--- a/drivers/net/vmxnet3/vmxnet3_int.h
+++ b/drivers/net/vmxnet3/vmxnet3_int.h
@@ -27,16 +27,11 @@
 #ifndef _VMXNET3_INT_H
 #define _VMXNET3_INT_H
 
-#include <linux/types.h>
 #include <linux/ethtool.h>
 #include <linux/delay.h>
-#include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/pci.h>
-#include <linux/ethtool.h>
 #include <linux/compiler.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
 #include <linux/ioport.h>
diff --git a/drivers/net/vxge/vxge-config.c b/drivers/net/vxge/vxge-config.c
index 9e94c4b..32a75fa 100644
--- a/drivers/net/vxge/vxge-config.c
+++ b/drivers/net/vxge/vxge-config.c
@@ -356,10 +356,8 @@
 
 	switch (host_type) {
 	case VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION:
-		if (func_id == 0) {
-			access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
-					VXGE_HW_DEVICE_ACCESS_RIGHT_SRPCIM;
-		}
+		access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
+				VXGE_HW_DEVICE_ACCESS_RIGHT_SRPCIM;
 		break;
 	case VXGE_HW_MR_NO_SR_VH0_BASE_FUNCTION:
 		access_rights |= VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM |
@@ -382,6 +380,22 @@
 	return access_rights;
 }
 /*
+ * __vxge_hw_device_is_privilaged
+ * This routine checks if the device function is privilaged or not
+ */
+
+enum vxge_hw_status
+__vxge_hw_device_is_privilaged(u32 host_type, u32 func_id)
+{
+	if (__vxge_hw_device_access_rights_get(host_type,
+		func_id) &
+		VXGE_HW_DEVICE_ACCESS_RIGHT_MRPCIM)
+		return VXGE_HW_OK;
+	else
+		return VXGE_HW_ERR_PRIVILAGED_OPEARATION;
+}
+
+/*
  * __vxge_hw_device_host_info_get
  * This routine returns the host type assignments
  */
@@ -446,220 +460,6 @@
 	return VXGE_HW_OK;
 }
 
-enum vxge_hw_status
-__vxge_hw_device_is_privilaged(struct __vxge_hw_device *hldev)
-{
-	if ((hldev->host_type == VXGE_HW_NO_MR_NO_SR_NORMAL_FUNCTION ||
-	hldev->host_type == VXGE_HW_MR_NO_SR_VH0_BASE_FUNCTION ||
-	hldev->host_type == VXGE_HW_NO_MR_SR_VH0_FUNCTION0) &&
-	(hldev->func_id == 0))
-		return VXGE_HW_OK;
-	else
-		return VXGE_HW_ERR_PRIVILAGED_OPEARATION;
-}
-
-/*
- * vxge_hw_wrr_rebalance - Rebalance the RX_WRR and KDFC_WRR calandars.
- * Rebalance the RX_WRR and KDFC_WRR calandars.
- */
-static enum
-vxge_hw_status vxge_hw_wrr_rebalance(struct __vxge_hw_device *hldev)
-{
-	u64 val64;
-	u32 wrr_states[VXGE_HW_WEIGHTED_RR_SERVICE_STATES];
-	u32 i, j, how_often = 1;
-	enum vxge_hw_status status = VXGE_HW_OK;
-
-	status = __vxge_hw_device_is_privilaged(hldev);
-	if (status != VXGE_HW_OK)
-		goto exit;
-
-	/* Reset the priorities assigned to the WRR arbitration
-	phases for the receive traffic */
-	for (i = 0; i < VXGE_HW_WRR_RING_COUNT; i++)
-		writeq(0, ((&hldev->mrpcim_reg->rx_w_round_robin_0) + i));
-
-	/* Reset the transmit FIFO servicing calendar for FIFOs */
-	for (i = 0; i < VXGE_HW_WRR_FIFO_COUNT; i++) {
-		writeq(0, ((&hldev->mrpcim_reg->kdfc_w_round_robin_0) + i));
-		writeq(0, ((&hldev->mrpcim_reg->kdfc_w_round_robin_20) + i));
-	}
-
-	/* Assign WRR priority  0 for all FIFOs */
-	for (i = 1; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-		writeq(VXGE_HW_KDFC_FIFO_0_CTRL_WRR_NUMBER(0),
-				((&hldev->mrpcim_reg->kdfc_fifo_0_ctrl)  + i));
-
-		writeq(VXGE_HW_KDFC_FIFO_17_CTRL_WRR_NUMBER(0),
-			((&hldev->mrpcim_reg->kdfc_fifo_17_ctrl) + i));
-	}
-
-	/* Reset to service non-offload doorbells */
-	writeq(0, &hldev->mrpcim_reg->kdfc_entry_type_sel_0);
-	writeq(0, &hldev->mrpcim_reg->kdfc_entry_type_sel_1);
-
-	/* Set priority 0 to all receive queues */
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_0);
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_1);
-	writeq(0, &hldev->mrpcim_reg->rx_queue_priority_2);
-
-	/* Initialize all the slots as unused */
-	for (i = 0; i < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; i++)
-		wrr_states[i] = -1;
-
-	/* Prepare the Fifo service states */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
-		if (!hldev->config.vp_config[i].min_bandwidth)
-			continue;
-
-		how_often = VXGE_HW_VPATH_BANDWIDTH_MAX /
-				hldev->config.vp_config[i].min_bandwidth;
-		if (how_often) {
-
-			for (j = 0; j < VXGE_HW_WRR_FIFO_SERVICE_STATES;) {
-				if (wrr_states[j] == -1) {
-					wrr_states[j] = i;
-					/* Make sure each fifo is serviced
-					 * atleast once */
-					if (i == j)
-						j += VXGE_HW_MAX_VIRTUAL_PATHS;
-					else
-						j += how_often;
-				} else
-					j++;
-			}
-		}
-	}
-
-	/* Fill the unused slots with 0 */
-	for (j = 0; j < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; j++) {
-		if (wrr_states[j] == -1)
-			wrr_states[j] = 0;
-	}
-
-	/* Assign WRR priority number for FIFOs */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-		writeq(VXGE_HW_KDFC_FIFO_0_CTRL_WRR_NUMBER(i),
-				((&hldev->mrpcim_reg->kdfc_fifo_0_ctrl) + i));
-
-		writeq(VXGE_HW_KDFC_FIFO_17_CTRL_WRR_NUMBER(i),
-			((&hldev->mrpcim_reg->kdfc_fifo_17_ctrl) + i));
-	}
-
-	/* Modify the servicing algorithm applied to the 3 types of doorbells.
-	i.e, none-offload, message and offload */
-	writeq(VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_0(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_1(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_2(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_3(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_4(1) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_5(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_6(0) |
-				VXGE_HW_KDFC_ENTRY_TYPE_SEL_0_NUMBER_7(0),
-				&hldev->mrpcim_reg->kdfc_entry_type_sel_0);
-
-	writeq(VXGE_HW_KDFC_ENTRY_TYPE_SEL_1_NUMBER_8(1),
-				&hldev->mrpcim_reg->kdfc_entry_type_sel_1);
-
-	for (i = 0, j = 0; i < VXGE_HW_WRR_FIFO_COUNT; i++) {
-
-		val64 = VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_0(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_1(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_2(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_3(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_4(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_5(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_6(wrr_states[j++]);
-		val64 |= VXGE_HW_KDFC_W_ROUND_ROBIN_0_NUMBER_7(wrr_states[j++]);
-
-		writeq(val64, (&hldev->mrpcim_reg->kdfc_w_round_robin_0 + i));
-		writeq(val64, (&hldev->mrpcim_reg->kdfc_w_round_robin_20 + i));
-	}
-
-	/* Set up the priorities assigned to receive queues */
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_0(0) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_1(1) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_2(2) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_3(3) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_4(4) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_5(5) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_6(6) |
-			VXGE_HW_RX_QUEUE_PRIORITY_0_RX_Q_NUMBER_7(7),
-			&hldev->mrpcim_reg->rx_queue_priority_0);
-
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_8(8) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_9(9) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_10(10) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_11(11) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_12(12) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_13(13) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_14(14) |
-			VXGE_HW_RX_QUEUE_PRIORITY_1_RX_Q_NUMBER_15(15),
-			&hldev->mrpcim_reg->rx_queue_priority_1);
-
-	writeq(VXGE_HW_RX_QUEUE_PRIORITY_2_RX_Q_NUMBER_16(16),
-				&hldev->mrpcim_reg->rx_queue_priority_2);
-
-	/* Initialize all the slots as unused */
-	for (i = 0; i < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; i++)
-		wrr_states[i] = -1;
-
-	/* Prepare the Ring service states */
-	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
-
-		if (!hldev->config.vp_config[i].min_bandwidth)
-			continue;
-
-		how_often = VXGE_HW_VPATH_BANDWIDTH_MAX /
-				hldev->config.vp_config[i].min_bandwidth;
-
-		if (how_often) {
-			for (j = 0; j < VXGE_HW_WRR_RING_SERVICE_STATES;) {
-				if (wrr_states[j] == -1) {
-					wrr_states[j] = i;
-					/* Make sure each ring is
-					 * serviced atleast once */
-					if (i == j)
-						j += VXGE_HW_MAX_VIRTUAL_PATHS;
-					else
-						j += how_often;
-				} else
-					j++;
-			}
-		}
-	}
-
-	/* Fill the unused slots with 0 */
-	for (j = 0; j < VXGE_HW_WEIGHTED_RR_SERVICE_STATES; j++) {
-		if (wrr_states[j] == -1)
-			wrr_states[j] = 0;
-	}
-
-	for (i = 0, j = 0; i < VXGE_HW_WRR_RING_COUNT; i++) {
-		val64 =  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_0(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_1(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_2(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_3(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_4(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_5(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_6(
-				wrr_states[j++]);
-		val64 |=  VXGE_HW_RX_W_ROUND_ROBIN_0_RX_W_PRIORITY_SS_7(
-				wrr_states[j++]);
-
-		writeq(val64, ((&hldev->mrpcim_reg->rx_w_round_robin_0) + i));
-	}
-exit:
-	return status;
-}
-
 /*
  * __vxge_hw_device_initialize
  * Initialize Titan-V hardware.
@@ -668,14 +468,14 @@
 {
 	enum vxge_hw_status status = VXGE_HW_OK;
 
-	if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev)) {
+	if (VXGE_HW_OK == __vxge_hw_device_is_privilaged(hldev->host_type,
+				hldev->func_id)) {
 		/* Validate the pci-e link width and speed */
 		status = __vxge_hw_verify_pci_e_info(hldev);
 		if (status != VXGE_HW_OK)
 			goto exit;
 	}
 
-	vxge_hw_wrr_rebalance(hldev);
 exit:
 	return status;
 }
@@ -953,7 +753,8 @@
 	u64 val64;
 	enum vxge_hw_status status = VXGE_HW_OK;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -990,7 +791,8 @@
 
 	val64 = (u64 *)aggr_stats;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -1023,7 +825,8 @@
 	u32 offset = 0x0;
 	val64 = (u64 *) port_stats;
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -1221,7 +1024,8 @@
 		goto exit;
 	}
 
-	status = __vxge_hw_device_is_privilaged(hldev);
+	status = __vxge_hw_device_is_privilaged(hldev->host_type,
+			hldev->func_id);
 	if (status != VXGE_HW_OK)
 		goto exit;
 
@@ -2353,6 +2157,28 @@
 }
 
 /*
+ * vxge_hw_vpath_strip_fcs_check - Check for FCS strip.
+ */
+enum vxge_hw_status
+vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask)
+{
+	struct vxge_hw_vpmgmt_reg       __iomem *vpmgmt_reg;
+	enum vxge_hw_status status = VXGE_HW_OK;
+	int i = 0, j = 0;
+
+	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
+		if (!((vpath_mask) & vxge_mBIT(i)))
+			continue;
+		vpmgmt_reg = hldev->vpmgmt_reg[i];
+		for (j = 0; j < VXGE_HW_MAC_MAX_MAC_PORT_ID; j++) {
+			if (readq(&vpmgmt_reg->rxmac_cfg0_port_vpmgmt_clone[j])
+			& VXGE_HW_RXMAC_CFG0_PORT_VPMGMT_CLONE_STRIP_FCS)
+				return VXGE_HW_FAIL;
+		}
+	}
+	return status;
+}
+/*
  * vxge_hw_mgmt_reg_Write - Write Titan register.
  */
 enum vxge_hw_status
@@ -4056,6 +3882,30 @@
 	return status;
 }
 
+void
+vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id)
+{
+	struct __vxge_hw_virtualpath *vpath;
+	struct vxge_hw_vpath_reg __iomem *vp_reg;
+	struct vxge_hw_vp_config *config;
+	u64 val64;
+
+	vpath = &hldev->virtual_paths[vp_id];
+	vp_reg = vpath->vp_reg;
+	config = vpath->vp_config;
+
+	if (config->fifo.enable == VXGE_HW_FIFO_ENABLE) {
+		val64 = readq(&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
+
+		if (config->tti.timer_ci_en != VXGE_HW_TIM_TIMER_CI_ENABLE) {
+			config->tti.timer_ci_en = VXGE_HW_TIM_TIMER_CI_ENABLE;
+			val64 |= VXGE_HW_TIM_CFG1_INT_NUM_TIMER_CI;
+			writeq(val64,
+			&vp_reg->tim_cfg1_int_num[VXGE_HW_VPATH_INTR_TX]);
+		}
+	}
+	return;
+}
 /*
  * __vxge_hw_vpath_initialize
  * This routine is the final phase of init which initializes the
@@ -4098,8 +3948,6 @@
 	if (status != VXGE_HW_OK)
 		goto exit;
 
-	writeq(0, &vp_reg->gendma_int);
-
 	val64 = readq(&vp_reg->rtdma_rd_optimization_ctrl);
 
 	/* Get MRRS value from device control */
diff --git a/drivers/net/vxge/vxge-config.h b/drivers/net/vxge/vxge-config.h
index 3e94f0c..e7877df 100644
--- a/drivers/net/vxge/vxge-config.h
+++ b/drivers/net/vxge/vxge-config.h
@@ -2201,6 +2201,8 @@
 enum vxge_hw_status
 __vxge_hw_vpath_reset_check(struct __vxge_hw_virtualpath *vpath);
 
+enum vxge_hw_status
+vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask);
 /**
  * vxge_debug
  * @level: level of debug verbosity.
diff --git a/drivers/net/vxge/vxge-main.c b/drivers/net/vxge/vxge-main.c
index 068d7a9..e21358e 100644
--- a/drivers/net/vxge/vxge-main.c
+++ b/drivers/net/vxge/vxge-main.c
@@ -2435,7 +2435,6 @@
 	int ret = 0;
 #ifdef CONFIG_PCI_MSI
 	int vp_idx = 0, intr_idx = 0, intr_cnt = 0, msix_idx = 0, irq_req = 0;
-	u64 function_mode = vdev->config.device_hw_info.function_mode;
 	int pci_fun = PCI_FUNC(vdev->pdev->devfn);
 
 	if (vdev->config.intr_type == MSI_X)
@@ -2444,20 +2443,9 @@
 	if (ret) {
 		vxge_debug_init(VXGE_ERR,
 			"%s: Enabling MSI-X Failed", VXGE_DRIVER_NAME);
-		if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-			test_and_set_bit(__VXGE_STATE_CARD_UP,
-				&driver_config->inta_dev_open))
-			return VXGE_HW_FAIL;
-		else {
-			vxge_debug_init(VXGE_ERR,
-				"%s: Defaulting to INTA", VXGE_DRIVER_NAME);
-			vdev->config.intr_type = INTA;
-			vxge_hw_device_set_intr_type(vdev->devh,
-				VXGE_HW_INTR_MODE_IRQLINE);
-			vxge_close_vpaths(vdev, 1);
-			vdev->no_of_vpath = 1;
-			vdev->stats.vpaths_open = 1;
-		}
+		vxge_debug_init(VXGE_ERR,
+			"%s: Defaulting to INTA", VXGE_DRIVER_NAME);
+		vdev->config.intr_type = INTA;
 	}
 
 	if (vdev->config.intr_type == MSI_X) {
@@ -2505,24 +2493,11 @@
 					"%s: MSIX - %d  Registration failed",
 					vdev->ndev->name, intr_cnt);
 				vxge_rem_msix_isr(vdev);
-				if ((function_mode ==
-					VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-					test_and_set_bit(__VXGE_STATE_CARD_UP,
-						&driver_config->inta_dev_open))
-					return VXGE_HW_FAIL;
-				else {
-					vxge_hw_device_set_intr_type(
-						vdev->devh,
-						VXGE_HW_INTR_MODE_IRQLINE);
-						vdev->config.intr_type = INTA;
-					vxge_debug_init(VXGE_ERR,
-						"%s: Defaulting to INTA"
-						, vdev->ndev->name);
-					vxge_close_vpaths(vdev, 1);
-					vdev->no_of_vpath = 1;
-					vdev->stats.vpaths_open = 1;
+				vdev->config.intr_type = INTA;
+				vxge_debug_init(VXGE_ERR,
+					"%s: Defaulting to INTA"
+					, vdev->ndev->name);
 					goto INTA_MODE;
-				}
 			}
 
 			if (irq_req) {
@@ -2555,23 +2530,11 @@
 				"%s: MSIX - %d Registration failed",
 				vdev->ndev->name, intr_cnt);
 			vxge_rem_msix_isr(vdev);
-			if ((function_mode ==
-				VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-				test_and_set_bit(__VXGE_STATE_CARD_UP,
-						&driver_config->inta_dev_open))
-				return VXGE_HW_FAIL;
-			else {
-				vxge_hw_device_set_intr_type(vdev->devh,
-						VXGE_HW_INTR_MODE_IRQLINE);
-				vdev->config.intr_type = INTA;
-				vxge_debug_init(VXGE_ERR,
-					"%s: Defaulting to INTA",
-					vdev->ndev->name);
-				vxge_close_vpaths(vdev, 1);
-				vdev->no_of_vpath = 1;
-				vdev->stats.vpaths_open = 1;
+			vdev->config.intr_type = INTA;
+			vxge_debug_init(VXGE_ERR,
+				"%s: Defaulting to INTA",
+				vdev->ndev->name);
 				goto INTA_MODE;
-			}
 		}
 
 		vxge_hw_vpath_msix_unmask(vdev->vpaths[vp_idx].handle,
@@ -2584,6 +2547,10 @@
 	snprintf(vdev->desc[0], VXGE_INTR_STRLEN, "%s:vxge", vdev->ndev->name);
 
 	if (vdev->config.intr_type == INTA) {
+		vxge_hw_device_set_intr_type(vdev->devh,
+			VXGE_HW_INTR_MODE_IRQLINE);
+		vxge_hw_vpath_tti_ci_set(vdev->devh,
+			vdev->vpaths[0].device_id);
 		ret = request_irq((int) vdev->pdev->irq,
 			vxge_isr_napi,
 			IRQF_SHARED, vdev->desc[0], vdev);
@@ -2688,13 +2655,6 @@
 	 * initialized */
 	netif_carrier_off(dev);
 
-	/* Check for another device already opn with INTA */
-	if ((function_mode == VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION) &&
-		test_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open)) {
-		ret = -EPERM;
-		goto out0;
-	}
-
 	/* Open VPATHs */
 	status = vxge_open_vpaths(vdev);
 	if (status != VXGE_HW_OK) {
@@ -2983,7 +2943,6 @@
 	vxge_debug_entryexit(VXGE_TRACE,
 		"%s: %s:%d  Exiting...", dev->name, __func__, __LINE__);
 
-	clear_bit(__VXGE_STATE_CARD_UP, &driver_config->inta_dev_open);
 	clear_bit(__VXGE_STATE_RESET_CARD, &vdev->state);
 
 	return 0;
@@ -3653,11 +3612,12 @@
 		device_config->vp_config[i].fifo.enable =
 						VXGE_HW_FIFO_ENABLE;
 		device_config->vp_config[i].fifo.max_frags =
-				MAX_SKB_FRAGS;
+				MAX_SKB_FRAGS + 1;
 		device_config->vp_config[i].fifo.memblock_size =
 			VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE;
 
-		txdl_size = MAX_SKB_FRAGS * sizeof(struct vxge_hw_fifo_txd);
+		txdl_size = device_config->vp_config[i].fifo.max_frags *
+				sizeof(struct vxge_hw_fifo_txd);
 		txdl_per_memblock = VXGE_HW_MIN_FIFO_MEMBLOCK_SIZE / txdl_size;
 
 		device_config->vp_config[i].fifo.fifo_blocks =
@@ -4088,9 +4048,10 @@
 		driver_config->config_dev_cnt = 0;
 		driver_config->total_dev_cnt = 0;
 		driver_config->g_no_cpus = 0;
-		driver_config->vpath_per_dev = max_config_vpath;
 	}
 
+	driver_config->vpath_per_dev = max_config_vpath;
+
 	driver_config->total_dev_cnt++;
 	if (++driver_config->config_dev_cnt > max_config_dev) {
 		ret = 0;
@@ -4243,6 +4204,15 @@
 			goto _exit3;
 	}
 
+	/* if FCS stripping is not disabled in MAC fail driver load */
+	if (vxge_hw_vpath_strip_fcs_check(hldev, vpath_mask) != VXGE_HW_OK) {
+		vxge_debug_init(VXGE_ERR,
+			"%s: FCS stripping is not disabled in MAC"
+			" failing driver load", VXGE_DRIVER_NAME);
+		ret = -EINVAL;
+		goto _exit4;
+	}
+
 	vxge_hw_device_debug_set(hldev, VXGE_ERR, VXGE_COMPONENT_LL);
 
 	/* set private device info */
@@ -4387,6 +4357,27 @@
 	}
 
 	kfree(device_config);
+
+	/*
+	 * INTA is shared in multi-function mode. This is unlike the INTA
+	 * implementation in MR mode, where each VH has its own INTA message.
+	 * - INTA is masked (disabled) as long as at least one function sets
+	 * its TITAN_MASK_ALL_INT.ALARM bit.
+	 * - INTA is unmasked (enabled) when all enabled functions have cleared
+	 * their own TITAN_MASK_ALL_INT.ALARM bit.
+	 * The TITAN_MASK_ALL_INT ALARM & TRAFFIC bits are cleared on power up.
+	 * Though this driver leaves the top level interrupts unmasked while
+	 * leaving the required module interrupt bits masked on exit, there
+	 * could be a rougue driver around that does not follow this procedure
+	 * resulting in a failure to generate interrupts. The following code is
+	 * present to prevent such a failure.
+	 */
+
+	if (ll_config.device_hw_info.function_mode ==
+		VXGE_HW_FUNCTION_MODE_MULTI_FUNCTION)
+		if (vdev->config.intr_type == INTA)
+			vxge_hw_device_unmask_all(hldev);
+
 	vxge_debug_entryexit(VXGE_TRACE, "%s: %s:%d  Exiting...",
 		vdev->ndev->name, __func__, __LINE__);
 
diff --git a/drivers/net/vxge/vxge-main.h b/drivers/net/vxge/vxge-main.h
index 9c36b3a..7c83ba4 100644
--- a/drivers/net/vxge/vxge-main.h
+++ b/drivers/net/vxge/vxge-main.h
@@ -112,7 +112,6 @@
 struct vxge_drv_config {
 	int config_dev_cnt;
 	int total_dev_cnt;
-	unsigned long inta_dev_open;
 	int g_no_cpus;
 	unsigned int vpath_per_dev;
 };
diff --git a/drivers/net/vxge/vxge-reg.h b/drivers/net/vxge/vxge-reg.h
index 9a3b823..9a0cf8e 100644
--- a/drivers/net/vxge/vxge-reg.h
+++ b/drivers/net/vxge/vxge-reg.h
@@ -4326,10 +4326,6 @@
 /*0x011e0*/	u64	umq_bwr_init_byte;
 #define VXGE_HW_UMQ_BWR_INIT_BYTE_COUNT(val) vxge_vBIT(val, 0, 32)
 /*0x011e8*/	u64	gendma_int;
-#define	VXGE_HW_GENDMA_INT_IMMED_ENABLE	vxge_mBIT(6)
-#define	VXGE_HW_GENDMA_INT_EVENT_ENABLE	vxge_mBIT(7)
-#define VXGE_HW_GENDMA_INT_NUMBER(val) vxge_vBIT(val, 9, 7)
-#define VXGE_HW_GENDMA_INT_BITMAP(val) vxge_vBIT(val, 16, 16)
 /*0x011f0*/	u64	umqdmq_ir_init_notify;
 #define	VXGE_HW_UMQDMQ_IR_INIT_NOTIFY_PULSE	vxge_mBIT(3)
 /*0x011f8*/	u64	dmq_init_notify;
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index fe3ae51..61ce754 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -295,6 +295,8 @@
 	u64 val64;
 	u32 val32;
 
+	vxge_hw_device_mask_all(hldev);
+
 	for (i = 0; i < VXGE_HW_MAX_VIRTUAL_PATHS; i++) {
 
 		if (!(hldev->vpaths_deployed & vxge_mBIT(i)))
@@ -1232,7 +1234,7 @@
 	vxge_hw_channel_dtr_post(&fifo->channel, txdlh);
 
 	__vxge_hw_non_offload_db_post(fifo,
-		(u64)(size_t)txdl_priv->dma_addr,
+		(u64)txdl_priv->dma_addr,
 		txdl_priv->frags - 1,
 		fifo->no_snoop_bits);
 
diff --git a/drivers/net/vxge/vxge-traffic.h b/drivers/net/vxge/vxge-traffic.h
index 461742b..861c853 100644
--- a/drivers/net/vxge/vxge-traffic.h
+++ b/drivers/net/vxge/vxge-traffic.h
@@ -2389,6 +2389,8 @@
 
 int
 vxge_hw_channel_dtr_count(struct __vxge_hw_channel *channel);
+void
+vxge_hw_vpath_tti_ci_set(struct __vxge_hw_device *hldev, u32 vp_id);
 
 /* ========================== PRIVATE API ================================= */
 
diff --git a/drivers/net/vxge/vxge-version.h b/drivers/net/vxge/vxge-version.h
index 8fbce75..77c2a75 100644
--- a/drivers/net/vxge/vxge-version.h
+++ b/drivers/net/vxge/vxge-version.h
@@ -17,7 +17,7 @@
 
 #define VXGE_VERSION_MAJOR	"2"
 #define VXGE_VERSION_MINOR	"0"
-#define VXGE_VERSION_FIX	"5"
-#define VXGE_VERSION_BUILD	"18053"
+#define VXGE_VERSION_FIX	"6"
+#define VXGE_VERSION_BUILD	"18937"
 #define VXGE_VERSION_FOR	"k"
 #endif
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 66360a2..2eceb1a 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -296,8 +296,8 @@
 static unsigned int cosa_poll(struct file *file, poll_table *poll);
 static int cosa_open(struct inode *inode, struct file *file);
 static int cosa_release(struct inode *inode, struct file *file);
-static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg);
+static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
+				unsigned long arg);
 #ifdef COSA_FASYNC_WORKING
 static int cosa_fasync(struct inode *inode, struct file *file, int on);
 #endif
@@ -308,7 +308,7 @@
 	.read		= cosa_read,
 	.write		= cosa_write,
 	.poll		= cosa_poll,
-	.ioctl		= cosa_chardev_ioctl,
+	.unlocked_ioctl	= cosa_chardev_ioctl,
 	.open		= cosa_open,
 	.release	= cosa_release,
 #ifdef COSA_FASYNC_WORKING
@@ -1203,12 +1203,18 @@
 	return hdlc_ioctl(dev, ifr, cmd);
 }
 
-static int cosa_chardev_ioctl(struct inode *inode, struct file *file,
-	unsigned int cmd, unsigned long arg)
+static long cosa_chardev_ioctl(struct file *file, unsigned int cmd,
+							unsigned long arg)
 {
 	struct channel_data *channel = file->private_data;
-	struct cosa_data *cosa = channel->cosa;
-	return cosa_ioctl_common(cosa, channel, cmd, arg);
+	struct cosa_data *cosa;
+	long ret;
+
+	lock_kernel();
+	cosa = channel->cosa;
+	ret = cosa_ioctl_common(cosa, channel, cmd, arg);
+	unlock_kernel();
+	return ret;
 }
 
 
diff --git a/drivers/net/wimax/i2400m/Kconfig b/drivers/net/wimax/i2400m/Kconfig
index d623b3d..3f70338 100644
--- a/drivers/net/wimax/i2400m/Kconfig
+++ b/drivers/net/wimax/i2400m/Kconfig
@@ -31,6 +31,14 @@
 
 	  If unsure, it is safe to select M (module).
 
+config WIMAX_IWMC3200_SDIO
+	bool "Intel Wireless Multicom WiMAX Connection 3200 over SDIO"
+	depends on WIMAX_I2400M_SDIO
+	select IWMC3200TOP
+	help
+	  Select if you have a device based on the Intel Multicom WiMAX
+          Connection 3200 over SDIO.
+
 config WIMAX_I2400M_DEBUG_LEVEL
 	int "WiMAX i2400m debug level"
 	depends on WIMAX_I2400M
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index d7a764a..85f8bf4 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -5,6 +5,7 @@
 menuconfig WLAN
 	bool "Wireless LAN"
 	depends on !S390
+	select WIRELESS
 	default y
 	---help---
 	  This section contains all the pre 802.11 and 802.11 wireless
@@ -67,6 +68,8 @@
 	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
 	depends on ISA && WLAN_PRE80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
 	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
 	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
@@ -90,6 +93,8 @@
 	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
 	depends on PCMCIA && WLAN_PRE80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	help
 	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
 	  (PC-card) wireless Ethernet networking card to your computer.  This
@@ -102,6 +107,7 @@
 	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
 	depends on PCMCIA && WLAN_PRE80211
 	select WIRELESS_EXT
+	select WEXT_PRIV
 	help
 	  Say Y here if you intend to attach this type of PCMCIA (PC-card)
 	  wireless Ethernet networking card to your computer.
@@ -123,6 +129,8 @@
 	tristate "Aviator/Raytheon 2.4GHz wireless support"
 	depends on PCMCIA && WLAN_80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
 	  Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 	  (PC-card) wireless Ethernet networking card to your computer.
@@ -132,46 +140,6 @@
 	  To compile this driver as a module, choose M here: the module will be
 	  called ray_cs.  If unsure, say N.
 
-config LIBERTAS
-	tristate "Marvell 8xxx Libertas WLAN driver support"
-	depends on WLAN_80211
-	select WIRELESS_EXT
-	select LIB80211
-	select FW_LOADER
-	---help---
-	  A library for Marvell Libertas 8xxx devices.
-
-config LIBERTAS_USB
-	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
-	depends on LIBERTAS && USB
-	---help---
-	  A driver for Marvell Libertas 8388 USB devices.
-
-config LIBERTAS_CS
-	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
-	depends on LIBERTAS && PCMCIA
-	select FW_LOADER
-	---help---
-	  A driver for Marvell Libertas 8385 CompactFlash devices.
-
-config LIBERTAS_SDIO
-	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
-	depends on LIBERTAS && MMC
-	---help---
-	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
-
-config LIBERTAS_SPI
-	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
-	depends on LIBERTAS && SPI
-	---help---
-	  A driver for Marvell Libertas 8686 SPI devices.
-
-config LIBERTAS_DEBUG
-	bool "Enable full debugging output in the Libertas module."
-	depends on LIBERTAS
-	---help---
-	  Debugging support.
-
 config LIBERTAS_THINFIRM
 	tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
 	depends on WLAN_80211 && MAC80211
@@ -190,6 +158,8 @@
 	depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
 	select WIRELESS_EXT
 	select CRYPTO
+	select WEXT_SPY
+	select WEXT_PRIV
 	---help---
 	  This is the standard Linux driver to support Cisco/Aironet ISA and
 	  PCI 802.11 wireless cards.
@@ -207,6 +177,7 @@
       tristate "Atmel at76c50x chipset  802.11b support"
       depends on (PCI || PCMCIA) && WLAN_80211
       select WIRELESS_EXT
+      select WEXT_PRIV
       select FW_LOADER
       select CRC32
        ---help---
@@ -266,18 +237,21 @@
 	  Cisco Linux utilities can be used to configure the card.
 
 config PCMCIA_WL3501
-      tristate "Planet WL3501 PCMCIA cards"
-      depends on EXPERIMENTAL && PCMCIA && WLAN_80211
-      select WIRELESS_EXT
-       ---help---
-         A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
-	 It has basic support for Linux wireless extensions and initial
-	 micro support for ethtool.
+	tristate "Planet WL3501 PCMCIA cards"
+	depends on EXPERIMENTAL && PCMCIA && WLAN_80211
+	select WIRELESS_EXT
+	select WEXT_SPY
+	help
+	  A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+	  It has basic support for Linux wireless extensions and initial
+	  micro support for ethtool.
 
 config PRISM54
 	tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
 	depends on PCI && EXPERIMENTAL && WLAN_80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	---help---
 	  This enables support for FullMAC PCI/Cardbus prism54 devices. This
@@ -300,6 +274,7 @@
 	tristate "USB ZD1201 based Wireless device support"
 	depends on USB && WLAN_80211
 	select WIRELESS_EXT
+	select WEXT_PRIV
 	select FW_LOADER
 	---help---
 	  Say Y if you want to use wireless LAN adapters based on the ZyDAS
@@ -476,17 +451,18 @@
 	  To compile this driver as a module, choose M here: the module
 	  will be called mwl8k.  If unsure, say N.
 
-source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/ath/Kconfig"
-source "drivers/net/wireless/ipw2x00/Kconfig"
-source "drivers/net/wireless/iwlwifi/Kconfig"
-source "drivers/net/wireless/hostap/Kconfig"
 source "drivers/net/wireless/b43/Kconfig"
 source "drivers/net/wireless/b43legacy/Kconfig"
-source "drivers/net/wireless/zd1211rw/Kconfig"
-source "drivers/net/wireless/rt2x00/Kconfig"
-source "drivers/net/wireless/orinoco/Kconfig"
-source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/hostap/Kconfig"
+source "drivers/net/wireless/ipw2x00/Kconfig"
+source "drivers/net/wireless/iwlwifi/Kconfig"
 source "drivers/net/wireless/iwmc3200wifi/Kconfig"
+source "drivers/net/wireless/libertas/Kconfig"
+source "drivers/net/wireless/orinoco/Kconfig"
+source "drivers/net/wireless/p54/Kconfig"
+source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/wl12xx/Kconfig"
+source "drivers/net/wireless/zd1211rw/Kconfig"
 
 endif # WLAN
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index abf896a..4eec87c 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -5659,7 +5659,8 @@
 
 	pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
 	pci_save_state(pdev);
-	return pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	pci_set_power_state(pdev, pci_choose_state(pdev, state));
+	return 0;
 }
 
 static int airo_pci_resume(struct pci_dev *pdev)
diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c
index 8e1a55d..e559dc9 100644
--- a/drivers/net/wireless/at76c50x-usb.c
+++ b/drivers/net/wireless/at76c50x-usb.c
@@ -2217,6 +2217,8 @@
 static int at76_init_new_device(struct at76_priv *priv,
 				struct usb_interface *interface)
 {
+	struct wiphy *wiphy;
+	size_t len;
 	int ret;
 
 	/* set up the endpoint information */
@@ -2254,6 +2256,7 @@
 	priv->device_unplugged = 0;
 
 	/* mac80211 initialisation */
+	wiphy = priv->hw->wiphy;
 	priv->hw->wiphy->max_scan_ssids = 1;
 	priv->hw->wiphy->max_scan_ie_len = 0;
 	priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
@@ -2265,6 +2268,13 @@
 	SET_IEEE80211_DEV(priv->hw, &interface->dev);
 	SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);
 
+	len = sizeof(wiphy->fw_version);
+	snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
+		 priv->fw_version.major, priv->fw_version.minor,
+		 priv->fw_version.patch, priv->fw_version.build);
+
+	wiphy->hw_version = priv->board_type;
+
 	ret = ieee80211_register_hw(priv->hw);
 	if (ret) {
 		printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
diff --git a/drivers/net/wireless/ath/Kconfig b/drivers/net/wireless/ath/Kconfig
index 11ded15..6ce86cb 100644
--- a/drivers/net/wireless/ath/Kconfig
+++ b/drivers/net/wireless/ath/Kconfig
@@ -16,7 +16,15 @@
 	  http://wireless.kernel.org/en/users/Drivers/Atheros
 
 if ATH_COMMON
+
+config ATH_DEBUG
+	bool "Atheros wireless debugging"
+	---help---
+	  Say Y, if you want to debug atheros wireless drivers.
+	  Right now only ath9k makes use of this.
+
 source "drivers/net/wireless/ath/ath5k/Kconfig"
 source "drivers/net/wireless/ath/ath9k/Kconfig"
 source "drivers/net/wireless/ath/ar9170/Kconfig"
+
 endif
diff --git a/drivers/net/wireless/ath/Makefile b/drivers/net/wireless/ath/Makefile
index 4bb0132..8113a50 100644
--- a/drivers/net/wireless/ath/Makefile
+++ b/drivers/net/wireless/ath/Makefile
@@ -1,6 +1,11 @@
 obj-$(CONFIG_ATH5K)		+= ath5k/
-obj-$(CONFIG_ATH9K)		+= ath9k/
+obj-$(CONFIG_ATH9K_HW)		+= ath9k/
 obj-$(CONFIG_AR9170_USB)        += ar9170/
 
 obj-$(CONFIG_ATH_COMMON)	+= ath.o
-ath-objs 		:= main.o regd.o
+
+ath-objs :=	main.o \
+		regd.o \
+		hw.o
+
+ath-$(CONFIG_ATH_DEBUG) += debug.o
diff --git a/drivers/net/wireless/ath/ar9170/ar9170.h b/drivers/net/wireless/ath/ar9170/ar9170.h
index 914e471..9f94598 100644
--- a/drivers/net/wireless/ath/ar9170/ar9170.h
+++ b/drivers/net/wireless/ath/ar9170/ar9170.h
@@ -172,8 +172,6 @@
 
 	/* interface mode settings */
 	struct ieee80211_vif *vif;
-	u8 mac_addr[ETH_ALEN];
-	u8 bssid[ETH_ALEN];
 
 	/* beaconing */
 	struct sk_buff *beacon;
@@ -204,6 +202,8 @@
 	u8 power_2G_ht20[8];
 	u8 power_2G_ht40[8];
 
+	u8 phy_heavy_clip;
+
 #ifdef CONFIG_AR9170_LEDS
 	struct delayed_work led_work;
 	struct ar9170_led leds[AR9170_NUM_LEDS];
@@ -231,7 +231,7 @@
 	struct sk_buff_head tx_status_ampdu;
 	spinlock_t tx_ampdu_list_lock;
 	struct list_head tx_ampdu_list;
-	unsigned int tx_ampdu_pending;
+	atomic_t tx_ampdu_pending;
 
 	/* rxstream mpdu merge */
 	struct ar9170_rxstream_mpdu_merge rx_mpdu;
diff --git a/drivers/net/wireless/ath/ar9170/cmd.c b/drivers/net/wireless/ath/ar9170/cmd.c
index f57a620..cf6f5c4 100644
--- a/drivers/net/wireless/ath/ar9170/cmd.c
+++ b/drivers/net/wireless/ath/ar9170/cmd.c
@@ -72,8 +72,7 @@
 	return err;
 }
 
-static int ar9170_read_mreg(struct ar9170 *ar, int nregs,
-			    const u32 *regs, u32 *out)
+int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out)
 {
 	int i, err;
 	__le32 *offs, *res;
diff --git a/drivers/net/wireless/ath/ar9170/cmd.h b/drivers/net/wireless/ath/ar9170/cmd.h
index a4f0e50..826c45e 100644
--- a/drivers/net/wireless/ath/ar9170/cmd.h
+++ b/drivers/net/wireless/ath/ar9170/cmd.h
@@ -44,6 +44,7 @@
 int ar9170_write_mem(struct ar9170 *ar, const __le32 *data, size_t len);
 int ar9170_write_reg(struct ar9170 *ar, const u32 reg, const u32 val);
 int ar9170_read_reg(struct ar9170 *ar, u32 reg, u32 *val);
+int ar9170_read_mreg(struct ar9170 *ar, int nregs, const u32 *regs, u32 *out);
 int ar9170_echo_test(struct ar9170 *ar, u32 v);
 
 /*
diff --git a/drivers/net/wireless/ath/ar9170/hw.h b/drivers/net/wireless/ath/ar9170/hw.h
index 6cbfb2f..701ddb7 100644
--- a/drivers/net/wireless/ath/ar9170/hw.h
+++ b/drivers/net/wireless/ath/ar9170/hw.h
@@ -152,14 +152,14 @@
 #define		AR9170_MAC_REG_FTF_BIT14		BIT(14)
 #define		AR9170_MAC_REG_FTF_BIT15		BIT(15)
 #define		AR9170_MAC_REG_FTF_BAR			BIT(24)
-#define		AR9170_MAC_REG_FTF_BIT25		BIT(25)
+#define		AR9170_MAC_REG_FTF_BA			BIT(25)
 #define		AR9170_MAC_REG_FTF_PSPOLL		BIT(26)
 #define		AR9170_MAC_REG_FTF_RTS			BIT(27)
 #define		AR9170_MAC_REG_FTF_CTS			BIT(28)
 #define		AR9170_MAC_REG_FTF_ACK			BIT(29)
 #define		AR9170_MAC_REG_FTF_CFE			BIT(30)
 #define		AR9170_MAC_REG_FTF_CFE_ACK		BIT(31)
-#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0500ffff
+#define		AR9170_MAC_REG_FTF_DEFAULTS		0x0700ffff
 #define		AR9170_MAC_REG_FTF_MONITOR		0xfd00ffff
 
 #define AR9170_MAC_REG_RX_TOTAL			(AR9170_MAC_REG_BASE + 0x6A0)
@@ -311,6 +311,8 @@
 
 #define AR9170_TX_PHY_SHORT_GI			0x80000000
 
+#define AR5416_MAX_RATE_POWER                   63
+
 struct ar9170_rx_head {
 	u8 plcp[12];
 } __packed;
diff --git a/drivers/net/wireless/ath/ar9170/mac.c b/drivers/net/wireless/ath/ar9170/mac.c
index 614e321..ddc8c09 100644
--- a/drivers/net/wireless/ath/ar9170/mac.c
+++ b/drivers/net/wireless/ath/ar9170/mac.c
@@ -35,6 +35,9 @@
  *    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  *    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
+
+#include <asm/unaligned.h>
+
 #include "ar9170.h"
 #include "cmd.h"
 
@@ -227,11 +230,8 @@
 
 	ar9170_regwrite_begin(ar);
 
-	ar9170_regwrite(reg,
-			(mac[3] << 24) | (mac[2] << 16) |
-			(mac[1] << 8) | mac[0]);
-
-	ar9170_regwrite(reg + 4, (mac[5] << 8) | mac[4]);
+	ar9170_regwrite(reg, get_unaligned_le32(mac));
+	ar9170_regwrite(reg + 4, get_unaligned_le16(mac + 4));
 
 	ar9170_regwrite_finish();
 
@@ -311,13 +311,14 @@
 
 int ar9170_set_operating_mode(struct ar9170 *ar)
 {
+	struct ath_common *common = &ar->common;
 	u32 pm_mode = AR9170_MAC_REG_POWERMGT_DEFAULTS;
 	u8 *mac_addr, *bssid;
 	int err;
 
 	if (ar->vif) {
-		mac_addr = ar->mac_addr;
-		bssid = ar->bssid;
+		mac_addr = common->macaddr;
+		bssid = common->curbssid;
 
 		switch (ar->vif->type) {
 		case NL80211_IFTYPE_MESH_POINT:
diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c
index c1f8c69..7e59b82 100644
--- a/drivers/net/wireless/ath/ar9170/main.c
+++ b/drivers/net/wireless/ath/ar9170/main.c
@@ -414,9 +414,9 @@
 
 	skb_queue_tail(&ar->tx_status_ampdu, skb);
 	ar9170_tx_fake_ampdu_status(ar);
-	ar->tx_ampdu_pending--;
 
-	if (!list_empty(&ar->tx_ampdu_list) && !ar->tx_ampdu_pending)
+	if (atomic_dec_and_test(&ar->tx_ampdu_pending) &&
+	    !list_empty(&ar->tx_ampdu_list))
 		ar9170_tx_ampdu(ar);
 }
 
@@ -1248,6 +1248,7 @@
 	ar->global_ampdu_density = 6;
 	ar->global_ampdu_factor = 3;
 
+	atomic_set(&ar->tx_ampdu_pending, 0);
 	ar->bad_hw_nagger = jiffies;
 
 	err = ar->open(ar);
@@ -1773,7 +1774,7 @@
 					  msecs_to_jiffies(AR9170_TX_TIMEOUT);
 
 			if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-				ar->tx_ampdu_pending++;
+				atomic_inc(&ar->tx_ampdu_pending);
 
 #ifdef AR9170_QUEUE_DEBUG
 			printk(KERN_DEBUG "%s: send frame q:%d =>\n",
@@ -1784,7 +1785,7 @@
 			err = ar->tx(ar, skb);
 			if (unlikely(err)) {
 				if (arinfo->flags == AR9170_TX_FLAG_BLOCK_ACK)
-					ar->tx_ampdu_pending--;
+					atomic_dec(&ar->tx_ampdu_pending);
 
 				frames_failed++;
 				dev_kfree_skb_any(skb);
@@ -1931,7 +1932,7 @@
 	if (info->flags & IEEE80211_TX_CTL_AMPDU) {
 		bool run = ar9170_tx_ampdu_queue(ar, skb);
 
-		if (run || !ar->tx_ampdu_pending)
+		if (run || !atomic_read(&ar->tx_ampdu_pending))
 			ar9170_tx_ampdu(ar);
 	} else {
 		unsigned int queue = skb_get_queue_mapping(skb);
@@ -1952,6 +1953,7 @@
 				   struct ieee80211_if_init_conf *conf)
 {
 	struct ar9170 *ar = hw->priv;
+	struct ath_common *common = &ar->common;
 	int err = 0;
 
 	mutex_lock(&ar->mutex);
@@ -1962,7 +1964,7 @@
 	}
 
 	ar->vif = conf->vif;
-	memcpy(ar->mac_addr, conf->mac_addr, ETH_ALEN);
+	memcpy(common->macaddr, conf->mac_addr, ETH_ALEN);
 
 	if (modparam_nohwcrypt || (ar->vif->type != NL80211_IFTYPE_STATION)) {
 		ar->rx_software_decryption = true;
@@ -2131,12 +2133,13 @@
 				       u32 changed)
 {
 	struct ar9170 *ar = hw->priv;
+	struct ath_common *common = &ar->common;
 	int err = 0;
 
 	mutex_lock(&ar->mutex);
 
 	if (changed & BSS_CHANGED_BSSID) {
-		memcpy(ar->bssid, bss_conf->bssid, ETH_ALEN);
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 		err = ar9170_set_operating_mode(ar);
 		if (err)
 			goto out;
@@ -2190,22 +2193,30 @@
 {
 	struct ar9170 *ar = hw->priv;
 	int err;
-	u32 tsf_low;
-	u32 tsf_high;
 	u64 tsf;
+#define NR 3
+	static const u32 addr[NR] = { AR9170_MAC_REG_TSF_H,
+				    AR9170_MAC_REG_TSF_L,
+				    AR9170_MAC_REG_TSF_H };
+	u32 val[NR];
+	int loops = 0;
 
 	mutex_lock(&ar->mutex);
-	err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_L, &tsf_low);
-	if (!err)
-		err = ar9170_read_reg(ar, AR9170_MAC_REG_TSF_H, &tsf_high);
+
+	while (loops++ < 10) {
+		err = ar9170_read_mreg(ar, NR, addr, val);
+		if (err || val[0] == val[2])
+			break;
+	}
+
 	mutex_unlock(&ar->mutex);
 
 	if (WARN_ON(err))
 		return 0;
-
-	tsf = tsf_high;
-	tsf = (tsf << 32) | tsf_low;
+	tsf = val[0];
+	tsf = (tsf << 32) | val[1];
 	return tsf;
+#undef NR
 }
 
 static int ar9170_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
diff --git a/drivers/net/wireless/ath/ar9170/phy.c b/drivers/net/wireless/ath/ar9170/phy.c
index dbd488d..45a415e 100644
--- a/drivers/net/wireless/ath/ar9170/phy.c
+++ b/drivers/net/wireless/ath/ar9170/phy.c
@@ -1239,9 +1239,6 @@
 				    struct ar9170_calctl_edges edges[],
 				    u32 freq)
 {
-/* TODO: move somewhere else */
-#define AR5416_MAX_RATE_POWER        63
-
 	int i;
 	u8 rc = AR5416_MAX_RATE_POWER;
 	u8 f;
@@ -1259,10 +1256,11 @@
 			break;
 		}
 		if (i > 0 && f < edges[i].channel) {
-			if (f > edges[i-1].channel &&
-			    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+			if (f > edges[i - 1].channel &&
+			    edges[i - 1].power_flags &
+			    AR9170_CALCTL_EDGE_FLAGS) {
 				/* lower channel has the inband flag set */
-				rc = edges[i-1].power_flags &
+				rc = edges[i - 1].power_flags &
 					~AR9170_CALCTL_EDGE_FLAGS;
 			}
 			break;
@@ -1270,18 +1268,48 @@
 	}
 
 	if (i == AR5416_NUM_BAND_EDGES) {
-		if (f > edges[i-1].channel &&
-		    edges[i-1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
+		if (f > edges[i - 1].channel &&
+		    edges[i - 1].power_flags & AR9170_CALCTL_EDGE_FLAGS) {
 			/* lower channel has the inband flag set */
-			rc = edges[i-1].power_flags &
+			rc = edges[i - 1].power_flags &
 				~AR9170_CALCTL_EDGE_FLAGS;
 		}
 	}
 	return rc;
 }
 
-/* calculate the conformance test limits and apply them to ar->power*
- * (derived from otus hal/hpmain.c, line 3706 ff.)
+static u8 ar9170_get_heavy_clip(struct ar9170 *ar,
+				struct ar9170_calctl_edges edges[],
+				u32 freq, enum ar9170_bw bw)
+{
+	u8 f;
+	int i;
+	u8 rc = 0;
+
+	if (freq < 3000)
+		f = freq - 2300;
+	else
+		f = (freq - 4800) / 5;
+
+	if (bw == AR9170_BW_40_BELOW || bw == AR9170_BW_40_ABOVE)
+		rc |= 0xf0;
+
+	for (i = 0; i < AR5416_NUM_BAND_EDGES; i++) {
+		if (edges[i].channel == 0xff)
+			break;
+		if (f == edges[i].channel) {
+			if (!(edges[i].power_flags & AR9170_CALCTL_EDGE_FLAGS))
+				rc |= 0x0f;
+			break;
+		}
+	}
+
+	return rc;
+}
+
+/*
+ * calculate the conformance test limits and the heavy clip parameter
+ * and apply them to ar->power* (derived from otus hal/hpmain.c, line 3706)
  */
 static void ar9170_calc_ctl(struct ar9170 *ar, u32 freq, enum ar9170_bw bw)
 {
@@ -1295,7 +1323,8 @@
 		int pwr_cal_len;
 	} *modes;
 
-	/* order is relevant in the mode_list_*: we fall back to the
+	/*
+	 * order is relevant in the mode_list_*: we fall back to the
 	 * lower indices if any mode is missed in the EEPROM.
 	 */
 	struct ctl_modes mode_list_2ghz[] = {
@@ -1313,7 +1342,10 @@
 
 #define EDGES(c, n) (ar->eeprom.ctl_data[c].control_edges[n])
 
-	/* TODO: investigate the differences between OTUS'
+	ar->phy_heavy_clip = 0;
+
+	/*
+	 * TODO: investigate the differences between OTUS'
 	 * hpreg.c::zfHpGetRegulatoryDomain() and
 	 * ath/regd.c::ath_regd_get_band_ctl() -
 	 * e.g. for FCC3_WORLD the OTUS procedure
@@ -1347,6 +1379,15 @@
 		if (ctl_idx < AR5416_NUM_CTLS) {
 			int f_off = 0;
 
+			/* determine heav clip parameter from
+			   the 11G edges array */
+			if (modes[i].ctl_mode == CTL_11G) {
+				ar->phy_heavy_clip =
+					ar9170_get_heavy_clip(ar,
+							      EDGES(ctl_idx, 1),
+							      freq, bw);
+			}
+
 			/* adjust freq for 40MHz */
 			if (modes[i].ctl_mode == CTL_2GHT40 ||
 			    modes[i].ctl_mode == CTL_5GHT40) {
@@ -1360,13 +1401,15 @@
 				ar9170_get_max_edge_power(ar, EDGES(ctl_idx, 1),
 							  freq+f_off);
 
-			/* TODO: check if the regulatory max. power is
+			/*
+			 * TODO: check if the regulatory max. power is
 			 *  controlled by cfg80211 for DFS
 			 * (hpmain applies it to max_power itself for DFS freq)
 			 */
 
 		} else {
-			/* Workaround in otus driver, hpmain.c, line 3906:
+			/*
+			 * Workaround in otus driver, hpmain.c, line 3906:
 			 * if no data for 5GHT20 are found, take the
 			 * legacy 5G value.
 			 * We extend this here to fallback from any other *HT or
@@ -1390,6 +1433,19 @@
 						       modes[i].max_power);
 		}
 	}
+
+	if (ar->phy_heavy_clip & 0xf0) {
+		ar->power_2G_ht40[0]--;
+		ar->power_2G_ht40[1]--;
+		ar->power_2G_ht40[2]--;
+	}
+	if (ar->phy_heavy_clip & 0xf) {
+		ar->power_2G_ht20[0]++;
+		ar->power_2G_ht20[1]++;
+		ar->power_2G_ht20[2]++;
+	}
+
+
 #undef EDGES
 }
 
@@ -1499,8 +1555,6 @@
 	/* calc. conformance test limits and apply to ar->power*[] */
 	ar9170_calc_ctl(ar, freq, bw);
 
-	/* TODO: (heavy clip) regulatory domain power level fine-tuning. */
-
 	/* set ACK/CTS TX power */
 	ar9170_regwrite_begin(ar);
 
@@ -1643,6 +1697,17 @@
 	if (err)
 		return err;
 
+	if (ar->phy_heavy_clip) {
+		err = ar9170_write_reg(ar, 0x1c59e0,
+				       0x200 | ar->phy_heavy_clip);
+		if (err) {
+			if (ar9170_nag_limiter(ar))
+				printk(KERN_ERR "%s: failed to set "
+				       "heavy clip\n",
+				       wiphy_name(ar->hw->wiphy));
+		}
+	}
+
 	for (i = 0; i < 2; i++) {
 		ar->noise[i] = ar9170_calc_noise_dbm(
 				(le32_to_cpu(vals[2 + i]) >> 19) & 0x1ff);
diff --git a/drivers/net/wireless/ath/ar9170/usb.c b/drivers/net/wireless/ath/ar9170/usb.c
index e974e58..6bdcdf6 100644
--- a/drivers/net/wireless/ath/ar9170/usb.c
+++ b/drivers/net/wireless/ath/ar9170/usb.c
@@ -108,15 +108,15 @@
 		return ;
 
 	spin_lock_irqsave(&aru->tx_urb_lock, flags);
-	if (aru->tx_submitted_urbs >= AR9170_NUM_TX_URBS) {
+	if (atomic_read(&aru->tx_submitted_urbs) >= AR9170_NUM_TX_URBS) {
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 		return ;
 	}
-	aru->tx_submitted_urbs++;
+	atomic_inc(&aru->tx_submitted_urbs);
 
 	urb = usb_get_from_anchor(&aru->tx_pending);
 	if (!urb) {
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		spin_unlock_irqrestore(&aru->tx_urb_lock, flags);
 
 		return ;
@@ -133,7 +133,7 @@
 				err);
 
 		usb_unanchor_urb(urb);
-		aru->tx_submitted_urbs--;
+		atomic_dec(&aru->tx_submitted_urbs);
 		ar9170_tx_callback(&aru->common, urb->context);
 	}
 
@@ -151,7 +151,7 @@
 		return ;
 	}
 
-	aru->tx_submitted_urbs--;
+	atomic_dec(&aru->tx_submitted_urbs);
 
 	ar9170_tx_callback(&aru->common, skb);
 
@@ -794,7 +794,7 @@
 	spin_lock_init(&aru->tx_urb_lock);
 
 	aru->tx_pending_urbs = 0;
-	aru->tx_submitted_urbs = 0;
+	atomic_set(&aru->tx_submitted_urbs, 0);
 
 	aru->common.stop = ar9170_usb_stop;
 	aru->common.flush = ar9170_usb_flush;
diff --git a/drivers/net/wireless/ath/ar9170/usb.h b/drivers/net/wireless/ath/ar9170/usb.h
index d098f4d..a2ce3b1 100644
--- a/drivers/net/wireless/ath/ar9170/usb.h
+++ b/drivers/net/wireless/ath/ar9170/usb.h
@@ -67,7 +67,7 @@
 	bool req_one_stage_fw;
 
 	spinlock_t tx_urb_lock;
-	unsigned int tx_submitted_urbs;
+	atomic_t tx_submitted_urbs;
 	unsigned int tx_pending_urbs;
 
 	struct completion cmd_wait;
diff --git a/drivers/net/wireless/ath/ath.h b/drivers/net/wireless/ath/ath.h
index a63e90c..5e19a73 100644
--- a/drivers/net/wireless/ath/ath.h
+++ b/drivers/net/wireless/ath/ath.h
@@ -18,6 +18,15 @@
 #define ATH_H
 
 #include <linux/skbuff.h>
+#include <linux/if_ether.h>
+#include <net/mac80211.h>
+
+static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
+
+enum ath_device_state {
+	ATH_HW_UNAVAILABLE,
+	ATH_HW_INITIALIZED,
+};
 
 struct reg_dmn_pair_mapping {
 	u16 regDmnEnum;
@@ -36,13 +45,45 @@
 	struct reg_dmn_pair_mapping *regpair;
 };
 
+struct ath_ops {
+	unsigned int (*read)(void *, u32 reg_offset);
+        void (*write)(void *, u32 val, u32 reg_offset);
+};
+
+struct ath_common;
+
+struct ath_bus_ops {
+	void		(*read_cachesize)(struct ath_common *common, int *csz);
+	void		(*cleanup)(struct ath_common *common);
+	bool		(*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
+	void		(*bt_coex_prep)(struct ath_common *common);
+};
+
 struct ath_common {
+	void *ah;
+	void *priv;
+	struct ieee80211_hw *hw;
+	int debug_mask;
+	enum ath_device_state state;
+
 	u16 cachelsz;
+	u16 curaid;
+	u8 macaddr[ETH_ALEN];
+	u8 curbssid[ETH_ALEN];
+	u8 bssidmask[ETH_ALEN];
+
+	u8 tx_chainmask;
+	u8 rx_chainmask;
+
 	struct ath_regulatory regulatory;
+	const struct ath_ops *ops;
+	const struct ath_bus_ops *bus_ops;
 };
 
 struct sk_buff *ath_rxbuf_alloc(struct ath_common *common,
 				u32 len,
 				gfp_t gfp_mask);
 
+void ath_hw_setbssidmask(struct ath_common *common);
+
 #endif /* ATH_H */
diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h
index 6cd5efc..6a2a967 100644
--- a/drivers/net/wireless/ath/ath5k/ath5k.h
+++ b/drivers/net/wireless/ath/ath5k/ath5k.h
@@ -35,6 +35,7 @@
  * TODO: Make a more generic struct (eg. add more stuff to ath5k_capabilities)
  * and clean up common bits, then introduce set/get functions in eeprom.c */
 #include "eeprom.h"
+#include "../ath.h"
 
 /* PCI IDs */
 #define PCI_DEVICE_ID_ATHEROS_AR5210 		0x0007 /* AR5210 */
@@ -165,13 +166,6 @@
 #define AR5K_INI_VAL_XR			0
 #define AR5K_INI_VAL_MAX		5
 
-/* Used for BSSID etc manipulation */
-#define AR5K_LOW_ID(_a)(				\
-(_a)[0] | (_a)[1] << 8 | (_a)[2] << 16 | (_a)[3] << 24	\
-)
-
-#define AR5K_HIGH_ID(_a)	((_a)[4] | (_a)[5] << 8)
-
 /*
  * Some tuneable values (these should be changeable by the user)
  * TODO: Make use of them and add more options OR use debug/configfs
@@ -204,6 +198,7 @@
 #define AR5K_TUNE_CWMAX_11B			1023
 #define AR5K_TUNE_CWMAX_XR			7
 #define AR5K_TUNE_NOISE_FLOOR			-72
+#define AR5K_TUNE_CCA_MAX_GOOD_VALUE		-95
 #define AR5K_TUNE_MAX_TXPOWER			63
 #define AR5K_TUNE_DEFAULT_TXPOWER		25
 #define AR5K_TUNE_TPC_TXPOWER			false
@@ -1012,6 +1007,14 @@
 	} cap_queues;
 };
 
+/* size of noise floor history (keep it a power of two) */
+#define ATH5K_NF_CAL_HIST_MAX	8
+struct ath5k_nfcal_hist
+{
+	s16 index;				/* current index into nfval */
+	s16 nfval[ATH5K_NF_CAL_HIST_MAX];	/* last few noise floors */
+};
+
 
 /***************************************\
   HARDWARE ABSTRACTION LAYER STRUCTURE
@@ -1027,6 +1030,7 @@
 /* TODO: Clean up and merge with ath5k_softc */
 struct ath5k_hw {
 	u32			ah_magic;
+	struct ath_common       common;
 
 	struct ath5k_softc	*ah_sc;
 	void __iomem		*ah_iobase;
@@ -1067,14 +1071,6 @@
 	u8			ah_def_ant;
 	bool			ah_software_retry;
 
-	u8			ah_sta_id[ETH_ALEN];
-
-	/* Current BSSID we are trying to assoc to / create.
-	 * This is passed by mac80211 on config_interface() and cached here for
-	 * use in resets */
-	u8			ah_bssid[ETH_ALEN];
-	u8			ah_bssid_mask[ETH_ALEN];
-
 	int			ah_gpio_npins;
 
 	struct ath5k_capabilities ah_capabilities;
@@ -1125,6 +1121,8 @@
 		struct ieee80211_channel r_last_channel;
 	} ah_radar;
 
+	struct ath5k_nfcal_hist ah_nfcal_hist;
+
 	/* noise floor from last periodic calibration */
 	s32			ah_noise_floor;
 
@@ -1160,7 +1158,7 @@
  */
 
 /* Attach/Detach Functions */
-extern struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc);
+extern int ath5k_hw_attach(struct ath5k_softc *sc);
 extern void ath5k_hw_detach(struct ath5k_hw *ah);
 
 /* LED functions */
@@ -1203,10 +1201,9 @@
 /* Protocol Control Unit Functions */
 extern int ath5k_hw_set_opmode(struct ath5k_hw *ah);
 /* BSSID Functions */
-extern void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac);
 extern int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac);
-extern void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id);
-extern int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
+extern void ath5k_hw_set_associd(struct ath5k_hw *ah);
+extern void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask);
 /* Receive start/stop functions */
 extern void ath5k_hw_start_rx_pcu(struct ath5k_hw *ah);
 extern void ath5k_hw_stop_rx_pcu(struct ath5k_hw *ah);
@@ -1288,8 +1285,10 @@
 extern bool ath5k_channel_ok(struct ath5k_hw *ah, u16 freq, unsigned int flags);
 extern int ath5k_hw_channel(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 /* PHY calibration */
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah);
 extern int ath5k_hw_phy_calibrate(struct ath5k_hw *ah, struct ieee80211_channel *channel);
 extern int ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq);
+extern s16 ath5k_hw_get_noise_floor(struct ath5k_hw *ah);
 extern void ath5k_hw_calibration_poll(struct ath5k_hw *ah);
 /* Spur mitigation */
 bool ath5k_hw_chan_has_spur_noise(struct ath5k_hw *ah,
@@ -1329,17 +1328,21 @@
 	return turbo ? (clock / 80) : (clock / 40);
 }
 
-/*
- * Read from a register
- */
+static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
+{
+        return &ah->common;
+}
+
+static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
+{
+        return &(ath5k_hw_common(ah)->regulatory);
+}
+
 static inline u32 ath5k_hw_reg_read(struct ath5k_hw *ah, u16 reg)
 {
 	return ioread32(ah->ah_iobase + reg);
 }
 
-/*
- * Write to a register
- */
 static inline void ath5k_hw_reg_write(struct ath5k_hw *ah, u32 val, u16 reg)
 {
 	iowrite32(val, ah->ah_iobase + reg);
diff --git a/drivers/net/wireless/ath/ath5k/attach.c b/drivers/net/wireless/ath/ath5k/attach.c
index 71a1bd25..4228444 100644
--- a/drivers/net/wireless/ath/ath5k/attach.c
+++ b/drivers/net/wireless/ath/ath5k/attach.c
@@ -101,25 +101,15 @@
  * -ENODEV if the device is not supported or prints an error msg if something
  * else went wrong.
  */
-struct ath5k_hw *ath5k_hw_attach(struct ath5k_softc *sc)
+int ath5k_hw_attach(struct ath5k_softc *sc)
 {
-	struct ath5k_hw *ah;
+	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct pci_dev *pdev = sc->pdev;
 	struct ath5k_eeprom_info *ee;
 	int ret;
 	u32 srev;
 
-	/*If we passed the test malloc a ath5k_hw struct*/
-	ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
-	if (ah == NULL) {
-		ret = -ENOMEM;
-		ATH5K_ERR(sc, "out of memory\n");
-		goto err;
-	}
-
-	ah->ah_sc = sc;
-	ah->ah_iobase = sc->iobase;
-
 	/*
 	 * HW information
 	 */
@@ -278,12 +268,12 @@
 		goto err_free;
 	}
 
+	ee = &ah->ah_capabilities.cap_eeprom;
+
 	/*
 	 * Write PCI-E power save settings
 	 */
 	if ((ah->ah_version == AR5K_AR5212) && (pdev->is_pcie)) {
-		struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
-
 		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
 		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);
 
@@ -321,7 +311,6 @@
 	}
 
 	/* Crypto settings */
-	ee = &ah->ah_capabilities.cap_eeprom;
 	ah->ah_aes_support = srev >= AR5K_SREV_AR5212_V4 &&
 		(ee->ee_version >= AR5K_EEPROM_VERSION_5_0 &&
 		 !AR5K_EEPROM_AES_DIS(ee->ee_misc5));
@@ -336,20 +325,21 @@
 	ath5k_hw_set_lladdr(ah, (u8[ETH_ALEN]){});
 
 	/* Set BSSID to bcast address: ff:ff:ff:ff:ff:ff for now */
-	memset(ah->ah_bssid, 0xff, ETH_ALEN);
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	memcpy(common->curbssid, ath_bcast_mac, ETH_ALEN);
+	ath5k_hw_set_associd(ah);
 	ath5k_hw_set_opmode(ah);
 
 	ath5k_hw_rfgain_opt_init(ah);
 
+	ath5k_hw_init_nfcal_hist(ah);
+
 	/* turn on HW LEDs */
 	ath5k_hw_set_ledstate(ah, AR5K_LED_INIT);
 
-	return ah;
+	return 0;
 err_free:
 	kfree(ah);
-err:
-	return ERR_PTR(ret);
+	return ret;
 }
 
 /**
@@ -369,5 +359,4 @@
 	ath5k_eeprom_detach(ah);
 
 	/* assume interrupts are down */
-	kfree(ah);
 }
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index 9c6ab53..07c1e52 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -195,12 +195,13 @@
 				const struct pci_device_id *id);
 static void __devexit	ath5k_pci_remove(struct pci_dev *pdev);
 #ifdef CONFIG_PM
-static int		ath5k_pci_suspend(struct pci_dev *pdev,
-					pm_message_t state);
-static int		ath5k_pci_resume(struct pci_dev *pdev);
+static int		ath5k_pci_suspend(struct device *dev);
+static int		ath5k_pci_resume(struct device *dev);
+
+SIMPLE_DEV_PM_OPS(ath5k_pm_ops, ath5k_pci_suspend, ath5k_pci_resume);
+#define ATH5K_PM_OPS	(&ath5k_pm_ops)
 #else
-#define ath5k_pci_suspend NULL
-#define ath5k_pci_resume NULL
+#define ATH5K_PM_OPS	NULL
 #endif /* CONFIG_PM */
 
 static struct pci_driver ath5k_pci_driver = {
@@ -208,8 +209,7 @@
 	.id_table	= ath5k_pci_id_table,
 	.probe		= ath5k_pci_probe,
 	.remove		= __devexit_p(ath5k_pci_remove),
-	.suspend	= ath5k_pci_suspend,
-	.resume		= ath5k_pci_resume,
+	.driver.pm	= ATH5K_PM_OPS,
 };
 
 
@@ -437,6 +437,22 @@
 
 	return name;
 }
+static unsigned int ath5k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+	return ath5k_hw_reg_read(ah, reg_offset);
+}
+
+static void ath5k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath5k_hw *ah = (struct ath5k_hw *) hw_priv;
+	ath5k_hw_reg_write(ah, val, reg_offset);
+}
+
+static const struct ath_ops ath5k_common_ops = {
+	.read = ath5k_ioread32,
+	.write = ath5k_iowrite32,
+};
 
 static int __devinit
 ath5k_pci_probe(struct pci_dev *pdev,
@@ -444,6 +460,7 @@
 {
 	void __iomem *mem;
 	struct ath5k_softc *sc;
+	struct ath_common *common;
 	struct ieee80211_hw *hw;
 	int ret;
 	u8 csz;
@@ -547,7 +564,6 @@
 	__set_bit(ATH_STAT_INVALID, sc->status);
 
 	sc->iobase = mem; /* So we can unmap it on detach */
-	sc->common.cachelsz = csz << 2; /* convert to bytes */
 	sc->opmode = NL80211_IFTYPE_STATION;
 	sc->bintval = 1000;
 	mutex_init(&sc->lock);
@@ -565,13 +581,28 @@
 		goto err_free;
 	}
 
-	/* Initialize device */
-	sc->ah = ath5k_hw_attach(sc);
-	if (IS_ERR(sc->ah)) {
-		ret = PTR_ERR(sc->ah);
+	/*If we passed the test malloc a ath5k_hw struct*/
+	sc->ah = kzalloc(sizeof(struct ath5k_hw), GFP_KERNEL);
+	if (!sc->ah) {
+		ret = -ENOMEM;
+		ATH5K_ERR(sc, "out of memory\n");
 		goto err_irq;
 	}
 
+	sc->ah->ah_sc = sc;
+	sc->ah->ah_iobase = sc->iobase;
+	common = ath5k_hw_common(sc->ah);
+	common->ops = &ath5k_common_ops;
+	common->ah = sc->ah;
+	common->hw = hw;
+	common->cachelsz = csz << 2; /* convert to bytes */
+
+	/* Initialize device */
+	ret = ath5k_hw_attach(sc);
+	if (ret) {
+		goto err_free_ah;
+	}
+
 	/* set up multi-rate retry capabilities */
 	if (sc->ah->ah_version == AR5K_AR5212) {
 		hw->max_rates = 4;
@@ -640,6 +671,8 @@
 	ath5k_hw_detach(sc->ah);
 err_irq:
 	free_irq(pdev->irq, sc);
+err_free_ah:
+	kfree(sc->ah);
 err_free:
 	ieee80211_free_hw(hw);
 err_map:
@@ -661,6 +694,7 @@
 	ath5k_debug_finish_device(sc);
 	ath5k_detach(pdev, hw);
 	ath5k_hw_detach(sc->ah);
+	kfree(sc->ah);
 	free_irq(pdev->irq, sc);
 	pci_iounmap(pdev, sc->iobase);
 	pci_release_region(pdev, 0);
@@ -669,33 +703,20 @@
 }
 
 #ifdef CONFIG_PM
-static int
-ath5k_pci_suspend(struct pci_dev *pdev, pm_message_t state)
+static int ath5k_pci_suspend(struct device *dev)
 {
-	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
+	struct ieee80211_hw *hw = pci_get_drvdata(to_pci_dev(dev));
 	struct ath5k_softc *sc = hw->priv;
 
 	ath5k_led_off(sc);
-
-	pci_save_state(pdev);
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D3hot);
-
 	return 0;
 }
 
-static int
-ath5k_pci_resume(struct pci_dev *pdev)
+static int ath5k_pci_resume(struct device *dev)
 {
+	struct pci_dev *pdev = to_pci_dev(dev);
 	struct ieee80211_hw *hw = pci_get_drvdata(pdev);
 	struct ath5k_softc *sc = hw->priv;
-	int err;
-
-	pci_restore_state(pdev);
-
-	err = pci_enable_device(pdev);
-	if (err)
-		return err;
 
 	/*
 	 * Suspend/Resume resets the PCI configuration space, so we have to
@@ -718,7 +739,7 @@
 {
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath5k_softc *sc = hw->priv;
-	struct ath_regulatory *regulatory = &sc->common.regulatory;
+	struct ath_regulatory *regulatory = ath5k_hw_regulatory(sc->ah);
 
 	return ath_reg_notifier_apply(wiphy, request, regulatory);
 }
@@ -728,7 +749,7 @@
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
-	struct ath_regulatory *regulatory = &sc->common.regulatory;
+	struct ath_regulatory *regulatory = ath5k_hw_regulatory(ah);
 	u8 mac[ETH_ALEN] = {};
 	int ret;
 
@@ -815,7 +836,7 @@
 
 	SET_IEEE80211_PERM_ADDR(hw, mac);
 	/* All MAC address bits matter for ACKs */
-	memset(sc->bssidmask, 0xff, ETH_ALEN);
+	memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
 	ath5k_hw_set_bssid_mask(sc->ah, sc->bssidmask);
 
 	regulatory->current_rd = ah->ah_capabilities.cap_eeprom.ee_regdomain;
@@ -1153,19 +1174,20 @@
 static
 struct sk_buff *ath5k_rx_skb_alloc(struct ath5k_softc *sc, dma_addr_t *skb_addr)
 {
+	struct ath_common *common = ath5k_hw_common(sc->ah);
 	struct sk_buff *skb;
 
 	/*
 	 * Allocate buffer with headroom_needed space for the
 	 * fake physical layer header at the start.
 	 */
-	skb = ath_rxbuf_alloc(&sc->common,
-			      sc->rxbufsize + sc->common.cachelsz - 1,
+	skb = ath_rxbuf_alloc(common,
+			      sc->rxbufsize + common->cachelsz - 1,
 			      GFP_ATOMIC);
 
 	if (!skb) {
 		ATH5K_ERR(sc, "can't alloc skbuff of size %u\n",
-				sc->rxbufsize + sc->common.cachelsz - 1);
+				sc->rxbufsize + common->cachelsz - 1);
 		return NULL;
 	}
 
@@ -1606,13 +1628,14 @@
 ath5k_rx_start(struct ath5k_softc *sc)
 {
 	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	struct ath5k_buf *bf;
 	int ret;
 
-	sc->rxbufsize = roundup(IEEE80211_MAX_LEN, sc->common.cachelsz);
+	sc->rxbufsize = roundup(IEEE80211_MAX_LEN, common->cachelsz);
 
 	ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "cachelsz %u rxbufsize %u\n",
-		sc->common.cachelsz, sc->rxbufsize);
+		common->cachelsz, sc->rxbufsize);
 
 	spin_lock_bh(&sc->rxbuflock);
 	sc->rxlink = NULL;
@@ -1685,13 +1708,14 @@
 ath5k_check_ibss_tsf(struct ath5k_softc *sc, struct sk_buff *skb,
 		     struct ieee80211_rx_status *rxs)
 {
+	struct ath_common *common = ath5k_hw_common(sc->ah);
 	u64 tsf, bc_tstamp;
 	u32 hw_tu;
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
 
 	if (ieee80211_is_beacon(mgmt->frame_control) &&
 	    le16_to_cpu(mgmt->u.beacon.capab_info) & WLAN_CAPABILITY_IBSS &&
-	    memcmp(mgmt->bssid, sc->ah->ah_bssid, ETH_ALEN) == 0) {
+	    memcmp(mgmt->bssid, common->curbssid, ETH_ALEN) == 0) {
 		/*
 		 * Received an IBSS beacon with the same BSSID. Hardware *must*
 		 * have updated the local TSF. We have to work around various
@@ -3177,6 +3201,7 @@
 {
 	struct ath5k_softc *sc = hw->priv;
 	struct ath5k_hw *ah = sc->ah;
+	struct ath_common *common = ath5k_hw_common(ah);
 	unsigned long flags;
 
 	mutex_lock(&sc->lock);
@@ -3185,10 +3210,9 @@
 
 	if (changes & BSS_CHANGED_BSSID) {
 		/* Cache for later use during resets */
-		memcpy(ah->ah_bssid, bss_conf->bssid, ETH_ALEN);
-		/* XXX: assoc id is set to 0 for now, mac80211 doesn't have
-		 * a clean way of letting us retrieve this yet. */
-		ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+		memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
+		common->curaid = 0;
+		ath5k_hw_set_associd(ah);
 		mmiowb();
 	}
 
@@ -3201,6 +3225,14 @@
 			set_beacon_filter(hw, sc->assoc);
 		ath5k_hw_set_ledstate(sc->ah, sc->assoc ?
 			AR5K_LED_ASSOC : AR5K_LED_INIT);
+		if (bss_conf->assoc) {
+			ATH5K_DBG(sc, ATH5K_DEBUG_ANY,
+				  "Bss Info ASSOC %d, bssid: %pM\n",
+				  bss_conf->aid, common->curbssid);
+			common->curaid = bss_conf->aid;
+			ath5k_hw_set_associd(ah);
+			/* Once ANI is available you would start it here */
+		}
 	}
 
 	if (changes & BSS_CHANGED_BEACON) {
diff --git a/drivers/net/wireless/ath/ath5k/base.h b/drivers/net/wireless/ath/ath5k/base.h
index a28c42f..b14ba07 100644
--- a/drivers/net/wireless/ath/ath5k/base.h
+++ b/drivers/net/wireless/ath/ath5k/base.h
@@ -115,7 +115,6 @@
  * associated with an instance of a device */
 struct ath5k_softc {
 	struct pci_dev		*pdev;		/* for dma mapping */
-	struct ath_common	common;
 	void __iomem		*iobase;	/* address of the device */
 	struct mutex		lock;		/* dev-level lock */
 	struct ieee80211_tx_queue_stats tx_stats[AR5K_NUM_TX_QUEUES];
@@ -202,15 +201,4 @@
 #define ath5k_hw_hasveol(_ah) \
 	(ath5k_hw_get_capability(_ah, AR5K_CAP_VEOL, 0, NULL) == 0)
 
-static inline struct ath_common *ath5k_hw_common(struct ath5k_hw *ah)
-{
-	return &ah->ah_sc->common;
-}
-
-static inline struct ath_regulatory *ath5k_hw_regulatory(struct ath5k_hw *ah)
-{
-	return &(ath5k_hw_common(ah)->regulatory);
-
-}
-
 #endif
diff --git a/drivers/net/wireless/ath/ath5k/initvals.c b/drivers/net/wireless/ath/ath5k/initvals.c
index 18eb519..8fa4393 100644
--- a/drivers/net/wireless/ath/ath5k/initvals.c
+++ b/drivers/net/wireless/ath/ath5k/initvals.c
@@ -560,8 +560,8 @@
 	{ AR5K_SLEEP0,		0x0002aaaa },
 	{ AR5K_SLEEP1,		0x02005555 },
 	{ AR5K_SLEEP2,		0x00000000 },
-	{ AR5K_BSS_IDM0,	0xffffffff },
-	{ AR5K_BSS_IDM1,	0x0000ffff },
+	{ AR_BSSMSKL,		0xffffffff },
+	{ AR_BSSMSKU,		0x0000ffff },
 	{ AR5K_TXPC,		0x00000000 },
 	{ AR5K_PROFCNT_TX,	0x00000000 },
 	{ AR5K_PROFCNT_RX,	0x00000000 },
diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c
index 2942f13..64fc1eb 100644
--- a/drivers/net/wireless/ath/ath5k/pcu.c
+++ b/drivers/net/wireless/ath/ath5k/pcu.c
@@ -24,6 +24,8 @@
 * Protocol Control Unit Functions *
 \*********************************/
 
+#include <asm/unaligned.h>
+
 #include "ath5k.h"
 #include "reg.h"
 #include "debug.h"
@@ -44,6 +46,7 @@
  */
 int ath5k_hw_set_opmode(struct ath5k_hw *ah)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 pcu_reg, beacon_reg, low_id, high_id;
 
 
@@ -95,8 +98,8 @@
 	/*
 	 * Set PCU registers
 	 */
-	low_id = AR5K_LOW_ID(ah->ah_sta_id);
-	high_id = AR5K_HIGH_ID(ah->ah_sta_id);
+	low_id = get_unaligned_le32(common->macaddr);
+	high_id = get_unaligned_le16(common->macaddr + 4);
 	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
 	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
 
@@ -238,28 +241,6 @@
 	return 0;
 }
 
-
-/****************\
-* BSSID handling *
-\****************/
-
-/**
- * ath5k_hw_get_lladdr - Get station id
- *
- * @ah: The &struct ath5k_hw
- * @mac: The card's mac address
- *
- * Initialize ah->ah_sta_id using the mac address provided
- * (just a memcpy).
- *
- * TODO: Remove it once we merge ath5k_softc and ath5k_hw
- */
-void ath5k_hw_get_lladdr(struct ath5k_hw *ah, u8 *mac)
-{
-	ATH5K_TRACE(ah->ah_sc);
-	memcpy(mac, ah->ah_sta_id, ETH_ALEN);
-}
-
 /**
  * ath5k_hw_set_lladdr - Set station id
  *
@@ -270,17 +251,18 @@
  */
 int ath5k_hw_set_lladdr(struct ath5k_hw *ah, const u8 *mac)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 low_id, high_id;
 	u32 pcu_reg;
 
 	ATH5K_TRACE(ah->ah_sc);
 	/* Set new station ID */
-	memcpy(ah->ah_sta_id, mac, ETH_ALEN);
+	memcpy(common->macaddr, mac, ETH_ALEN);
 
 	pcu_reg = ath5k_hw_reg_read(ah, AR5K_STA_ID1) & 0xffff0000;
 
-	low_id = AR5K_LOW_ID(mac);
-	high_id = AR5K_HIGH_ID(mac);
+	low_id = get_unaligned_le32(mac);
+	high_id = get_unaligned_le16(mac + 4);
 
 	ath5k_hw_reg_write(ah, low_id, AR5K_STA_ID0);
 	ath5k_hw_reg_write(ah, pcu_reg | high_id, AR5K_STA_ID1);
@@ -297,159 +279,51 @@
  *
  * Sets the BSSID which trigers the "SME Join" operation
  */
-void ath5k_hw_set_associd(struct ath5k_hw *ah, const u8 *bssid, u16 assoc_id)
+void ath5k_hw_set_associd(struct ath5k_hw *ah)
 {
-	u32 low_id, high_id;
+	struct ath_common *common = ath5k_hw_common(ah);
 	u16 tim_offset = 0;
 
 	/*
 	 * Set simple BSSID mask on 5212
 	 */
-	if (ah->ah_version == AR5K_AR5212) {
-		ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_bssid_mask),
-							AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, AR5K_HIGH_ID(ah->ah_bssid_mask),
-							AR5K_BSS_IDM1);
-	}
+	if (ah->ah_version == AR5K_AR5212)
+		ath_hw_setbssidmask(common);
 
 	/*
 	 * Set BSSID which triggers the "SME Join" operation
 	 */
-	low_id = AR5K_LOW_ID(bssid);
-	high_id = AR5K_HIGH_ID(bssid);
-	ath5k_hw_reg_write(ah, low_id, AR5K_BSS_ID0);
-	ath5k_hw_reg_write(ah, high_id | ((assoc_id & 0x3fff) <<
-				AR5K_BSS_ID1_AID_S), AR5K_BSS_ID1);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le32(common->curbssid),
+			   AR5K_BSS_ID0);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le16(common->curbssid + 4) |
+			   ((common->curaid & 0x3fff) << AR5K_BSS_ID1_AID_S),
+			   AR5K_BSS_ID1);
 
-	if (assoc_id == 0) {
+	if (common->curaid == 0) {
 		ath5k_hw_disable_pspoll(ah);
 		return;
 	}
 
 	AR5K_REG_WRITE_BITS(ah, AR5K_BEACON, AR5K_BEACON_TIM,
-			tim_offset ? tim_offset + 4 : 0);
+			    tim_offset ? tim_offset + 4 : 0);
 
 	ath5k_hw_enable_pspoll(ah, NULL, 0);
 }
 
-/**
- * ath5k_hw_set_bssid_mask - filter out bssids we listen
- *
- * @ah: the &struct ath5k_hw
- * @mask: the bssid_mask, a u8 array of size ETH_ALEN
- *
- * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
- * which bits of the interface's MAC address should be looked at when trying
- * to decide which packets to ACK. In station mode and AP mode with a single
- * BSS every bit matters since we lock to only one BSS. In AP mode with
- * multiple BSSes (virtual interfaces) not every bit matters because hw must
- * accept frames for all BSSes and so we tweak some bits of our mac address
- * in order to have multiple BSSes.
- *
- * NOTE: This is a simple filter and does *not* filter out all
- * relevant frames. Some frames that are not for us might get ACKed from us
- * by PCU because they just match the mask.
- *
- * When handling multiple BSSes you can get the BSSID mask by computing the
- * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
- *
- * When you do this you are essentially computing the common bits of all your
- * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
- * the MAC address to obtain the relevant bits and compare the result with
- * (frame's BSSID & mask) to see if they match.
- */
-/*
- * Simple example: on your card you have have two BSSes you have created with
- * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
- * There is another BSSID-03 but you are not part of it. For simplicity's sake,
- * assuming only 4 bits for a mac address and for BSSIDs you can then have:
- *
- *                  \
- * MAC:                0001 |
- * BSSID-01:   0100 | --> Belongs to us
- * BSSID-02:   1001 |
- *                  /
- * -------------------
- * BSSID-03:   0110  | --> External
- * -------------------
- *
- * Our bssid_mask would then be:
- *
- *             On loop iteration for BSSID-01:
- *             ~(0001 ^ 0100)  -> ~(0101)
- *                             ->   1010
- *             bssid_mask      =    1010
- *
- *             On loop iteration for BSSID-02:
- *             bssid_mask &= ~(0001   ^   1001)
- *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
- *             bssid_mask =   (1010)  & ~(1001)
- *             bssid_mask =   (1010)  &  (0110)
- *             bssid_mask =   0010
- *
- * A bssid_mask of 0010 means "only pay attention to the second least
- * significant bit". This is because its the only bit common
- * amongst the MAC and all BSSIDs we support. To findout what the real
- * common bit is we can simply "&" the bssid_mask now with any BSSID we have
- * or our MAC address (we assume the hardware uses the MAC address).
- *
- * Now, suppose there's an incoming frame for BSSID-03:
- *
- * IFRAME-01:  0110
- *
- * An easy eye-inspeciton of this already should tell you that this frame
- * will not pass our check. This is beacuse the bssid_mask tells the
- * hardware to only look at the second least significant bit and the
- * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
- * as 1, which does not match 0.
- *
- * So with IFRAME-01 we *assume* the hardware will do:
- *
- *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
- *  --> allow = (0010) == 0000 ? 1 : 0;
- *  --> allow = 0
- *
- *  Lets now test a frame that should work:
- *
- * IFRAME-02:  0001 (we should allow)
- *
- *     allow = (0001 & 1010) == 1010
- *
- *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
- *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
- *  --> allow = (0010) == (0010)
- *  --> allow = 1
- *
- * Other examples:
- *
- * IFRAME-03:  0100 --> allowed
- * IFRAME-04:  1001 --> allowed
- * IFRAME-05:  1101 --> allowed but its not for us!!!
- *
- */
-int ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
+void ath5k_hw_set_bssid_mask(struct ath5k_hw *ah, const u8 *mask)
 {
-	u32 low_id, high_id;
+	struct ath_common *common = ath5k_hw_common(ah);
 	ATH5K_TRACE(ah->ah_sc);
 
 	/* Cache bssid mask so that we can restore it
 	 * on reset */
-	memcpy(ah->ah_bssid_mask, mask, ETH_ALEN);
-	if (ah->ah_version == AR5K_AR5212) {
-		low_id = AR5K_LOW_ID(mask);
-		high_id = AR5K_HIGH_ID(mask);
-
-		ath5k_hw_reg_write(ah, low_id, AR5K_BSS_IDM0);
-		ath5k_hw_reg_write(ah, high_id, AR5K_BSS_IDM1);
-
-		return 0;
-	}
-
-	return -EIO;
+	memcpy(common->bssidmask, mask, ETH_ALEN);
+	if (ah->ah_version == AR5K_AR5212)
+		ath_hw_setbssidmask(common);
 }
 
-
 /************\
 * RX Control *
 \************/
@@ -1157,14 +1031,17 @@
 	 /* Invalid entry (key table overflow) */
 	AR5K_ASSERT_ENTRY(entry, AR5K_KEYTABLE_SIZE);
 
-	/* MAC may be NULL if it's a broadcast key. In this case no need to
-	 * to compute AR5K_LOW_ID and AR5K_HIGH_ID as we already know it. */
+	/*
+	 * MAC may be NULL if it's a broadcast key. In this case no need to
+	 * to compute get_unaligned_le32 and get_unaligned_le16 as we
+	 * already know it.
+	 */
 	if (!mac) {
 		low_id = 0xffffffff;
 		high_id = 0xffff | AR5K_KEYTABLE_VALID;
 	} else {
-		low_id = AR5K_LOW_ID(mac);
-		high_id = AR5K_HIGH_ID(mac) | AR5K_KEYTABLE_VALID;
+		low_id = get_unaligned_le32(mac);
+		high_id = get_unaligned_le16(mac + 4) | AR5K_KEYTABLE_VALID;
 	}
 
 	ath5k_hw_reg_write(ah, low_id, AR5K_KEYTABLE_MAC0(entry));
diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1a039f2..8959907 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -1124,77 +1124,148 @@
 		ah->ah_swi_mask = AR5K_SWI_FULL_CALIBRATION;
 		AR5K_REG_ENABLE_BITS(ah, AR5K_CR, AR5K_CR_SWI);
 	}
-
 }
 
-/**
- * ath5k_hw_noise_floor_calibration - perform PHY noise floor calibration
- *
- * @ah: struct ath5k_hw pointer we are operating on
- * @freq: the channel frequency, just used for error logging
- *
- * This function performs a noise floor calibration of the PHY and waits for
- * it to complete. Then the noise floor value is compared to some maximum
- * noise floor we consider valid.
- *
- * Note that this is different from what the madwifi HAL does: it reads the
- * noise floor and afterwards initiates the calibration. Since the noise floor
- * calibration can take some time to finish, depending on the current channel
- * use, that avoids the occasional timeout warnings we are seeing now.
- *
- * See the following link for an Atheros patent on noise floor calibration:
- * http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL \
- * &p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7245893.PN.&OS=PN/7
- *
- * XXX: Since during noise floor calibration antennas are detached according to
- * the patent, we should stop tx queues here.
- */
-int
-ath5k_hw_noise_floor_calibration(struct ath5k_hw *ah, short freq)
+static int sign_extend(int val, const int nbits)
 {
-	int ret;
-	unsigned int i;
-	s32 noise_floor;
+	int order = BIT(nbits-1);
+	return (val ^ order) - order;
+}
 
-	/*
-	 * Enable noise floor calibration
-	 */
-	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_NF);
+static s32 ath5k_hw_read_measured_noise_floor(struct ath5k_hw *ah)
+{
+	s32 val;
 
-	ret = ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL,
-			AR5K_PHY_AGCCTL_NF, 0, false);
-	if (ret) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration timeout (%uMHz)\n", freq);
-		return -EAGAIN;
-	}
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
+	return sign_extend(AR5K_REG_MS(val, AR5K_PHY_NF_MINCCA_PWR), 9);
+}
 
-	/* Wait until the noise floor is calibrated and read the value */
-	for (i = 20; i > 0; i--) {
-		mdelay(1);
-		noise_floor = ath5k_hw_reg_read(ah, AR5K_PHY_NF);
-		noise_floor = AR5K_PHY_NF_RVAL(noise_floor);
-		if (noise_floor & AR5K_PHY_NF_ACTIVE) {
-			noise_floor = AR5K_PHY_NF_AVAL(noise_floor);
+void ath5k_hw_init_nfcal_hist(struct ath5k_hw *ah)
+{
+	int i;
 
-			if (noise_floor <= AR5K_TUNE_NOISE_FLOOR)
-				break;
+	ah->ah_nfcal_hist.index = 0;
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++)
+		ah->ah_nfcal_hist.nfval[i] = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+}
+
+static void ath5k_hw_update_nfcal_hist(struct ath5k_hw *ah, s16 noise_floor)
+{
+	struct ath5k_nfcal_hist *hist = &ah->ah_nfcal_hist;
+	hist->index = (hist->index + 1) & (ATH5K_NF_CAL_HIST_MAX-1);
+	hist->nfval[hist->index] = noise_floor;
+}
+
+static s16 ath5k_hw_get_median_noise_floor(struct ath5k_hw *ah)
+{
+	s16 sort[ATH5K_NF_CAL_HIST_MAX];
+	s16 tmp;
+	int i, j;
+
+	memcpy(sort, ah->ah_nfcal_hist.nfval, sizeof(sort));
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX - 1; i++) {
+		for (j = 1; j < ATH5K_NF_CAL_HIST_MAX - i; j++) {
+			if (sort[j] > sort[j-1]) {
+				tmp = sort[j];
+				sort[j] = sort[j-1];
+				sort[j-1] = tmp;
+			}
 		}
 	}
+	for (i = 0; i < ATH5K_NF_CAL_HIST_MAX; i++) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"cal %d:%d\n", i, sort[i]);
+	}
+	return sort[(ATH5K_NF_CAL_HIST_MAX-1) / 2];
+}
 
-	ATH5K_DBG_UNLIMIT(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
-		"noise floor %d\n", noise_floor);
+/*
+ * When we tell the hardware to perform a noise floor calibration
+ * by setting the AR5K_PHY_AGCCTL_NF bit, it will periodically
+ * sample-and-hold the minimum noise level seen at the antennas.
+ * This value is then stored in a ring buffer of recently measured
+ * noise floor values so we have a moving window of the last few
+ * samples.
+ *
+ * The median of the values in the history is then loaded into the
+ * hardware for its own use for RSSI and CCA measurements.
+ */
+void ath5k_hw_update_noise_floor(struct ath5k_hw *ah)
+{
+	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
+	u32 val;
+	s16 nf, threshold;
+	u8 ee_mode;
 
-	if (noise_floor > AR5K_TUNE_NOISE_FLOOR) {
-		ATH5K_ERR(ah->ah_sc,
-			"noise floor calibration failed (%uMHz)\n", freq);
-		return -EAGAIN;
+	/* keep last value if calibration hasn't completed */
+	if (ath5k_hw_reg_read(ah, AR5K_PHY_AGCCTL) & AR5K_PHY_AGCCTL_NF) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"NF did not complete in calibration window\n");
+
+		return;
 	}
 
-	ah->ah_noise_floor = noise_floor;
+	switch (ah->ah_current_channel->hw_value & CHANNEL_MODES) {
+	case CHANNEL_A:
+	case CHANNEL_T:
+	case CHANNEL_XR:
+		ee_mode = AR5K_EEPROM_MODE_11A;
+		break;
+	case CHANNEL_G:
+	case CHANNEL_TG:
+		ee_mode = AR5K_EEPROM_MODE_11G;
+		break;
+	default:
+	case CHANNEL_B:
+		ee_mode = AR5K_EEPROM_MODE_11B;
+		break;
+	}
 
-	return 0;
+
+	/* completed NF calibration, test threshold */
+	nf = ath5k_hw_read_measured_noise_floor(ah);
+	threshold = ee->ee_noise_floor_thr[ee_mode];
+
+	if (nf > threshold) {
+		ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+			"noise floor failure detected; "
+			"read %d, threshold %d\n",
+			nf, threshold);
+
+		nf = AR5K_TUNE_CCA_MAX_GOOD_VALUE;
+	}
+
+	ath5k_hw_update_nfcal_hist(ah, nf);
+	nf = ath5k_hw_get_median_noise_floor(ah);
+
+	/* load noise floor (in .5 dBm) so the hardware will use it */
+	val = ath5k_hw_reg_read(ah, AR5K_PHY_NF) & ~AR5K_PHY_NF_M;
+	val |= (nf * 2) & AR5K_PHY_NF_M;
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+
+	AR5K_REG_MASKED_BITS(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		~(AR5K_PHY_AGCCTL_NF_EN | AR5K_PHY_AGCCTL_NF_NOUPDATE));
+
+	ath5k_hw_register_timeout(ah, AR5K_PHY_AGCCTL, AR5K_PHY_AGCCTL_NF,
+		0, false);
+
+	/*
+	 * Load a high max CCA Power value (-50 dBm in .5 dBm units)
+	 * so that we're not capped by the median we just loaded.
+	 * This will be used as the initial value for the next noise
+	 * floor calibration.
+	 */
+	val = (val & ~AR5K_PHY_NF_M) | ((-50 * 2) & AR5K_PHY_NF_M);
+	ath5k_hw_reg_write(ah, val, AR5K_PHY_NF);
+	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
+		AR5K_PHY_AGCCTL_NF_EN |
+		AR5K_PHY_AGCCTL_NF_NOUPDATE |
+		AR5K_PHY_AGCCTL_NF);
+
+	ah->ah_noise_floor = nf;
+
+	ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_CALIBRATE,
+		"noise floor calibrated: %d\n", nf);
 }
 
 /*
@@ -1287,7 +1358,7 @@
 		return ret;
 	}
 
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/*
 	 * Re-enable RX/TX and beacons
@@ -1360,7 +1431,7 @@
 	 * since noise floor calibration interrupts rx path while I/Q
 	 * calibration doesn't. We don't need to run noise floor calibration
 	 * as often as I/Q calibration.*/
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
+	ath5k_hw_update_noise_floor(ah);
 
 	/* Initiate a gain_F calibration */
 	ath5k_hw_request_rfgain_probe(ah);
diff --git a/drivers/net/wireless/ath/ath5k/reg.h b/drivers/net/wireless/ath/ath5k/reg.h
index c63ea6a..4cb9c5d 100644
--- a/drivers/net/wireless/ath/ath5k/reg.h
+++ b/drivers/net/wireless/ath/ath5k/reg.h
@@ -35,7 +35,7 @@
  * released by Atheros and on various debug messages found on the net.
  */
 
-
+#include "../reg.h"
 
 /*====MAC DMA REGISTERS====*/
 
@@ -1650,12 +1650,6 @@
 #define AR5K_SLEEP2_DTIM_PER_S		16
 
 /*
- * BSSID mask registers
- */
-#define AR5K_BSS_IDM0			0x80e0	/* Upper bits */
-#define AR5K_BSS_IDM1			0x80e4	/* Lower bits */
-
-/*
  * TX power control (TPC) register
  *
  * XXX: PCDAC steps (0.5dbm) or DBM ?
@@ -2039,17 +2033,14 @@
 #define	AR5K_PHY_AGCCTL_NF_NOUPDATE	0x00020000	/* Don't update nf automaticaly */
 
 /*
- * PHY noise floor status register
+ * PHY noise floor status register (CCA = Clear Channel Assessment)
  */
 #define AR5K_PHY_NF			0x9864			/* Register address */
-#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor mask */
-#define AR5K_PHY_NF_ACTIVE		0x00000100	/* Noise floor calibration still active */
-#define AR5K_PHY_NF_RVAL(_n)		(((_n) >> 19) & AR5K_PHY_NF_M)
-#define AR5K_PHY_NF_AVAL(_n)		(-((_n) ^ AR5K_PHY_NF_M) + 1)
-#define AR5K_PHY_NF_SVAL(_n)		(((_n) & AR5K_PHY_NF_M) | (1 << 9))
+#define AR5K_PHY_NF_M			0x000001ff	/* Noise floor, written to hardware in 1/2 dBm units */
+#define AR5K_PHY_NF_SVAL(_n)           (((_n) & AR5K_PHY_NF_M) | (1 << 9))
 #define	AR5K_PHY_NF_THRESH62		0x0007f000	/* Thresh62 -check ANI patent- (field) */
 #define	AR5K_PHY_NF_THRESH62_S		12
-#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* ??? */
+#define	AR5K_PHY_NF_MINCCA_PWR		0x0ff80000	/* Minimum measured noise level, read from hardware in 1 dBm units */
 #define	AR5K_PHY_NF_MINCCA_PWR_S	19
 
 /*
diff --git a/drivers/net/wireless/ath/ath5k/reset.c b/drivers/net/wireless/ath/ath5k/reset.c
index 34e13c7..62954fc 100644
--- a/drivers/net/wireless/ath/ath5k/reset.c
+++ b/drivers/net/wireless/ath/ath5k/reset.c
@@ -25,6 +25,8 @@
   Reset functions and helpers
 \*****************************/
 
+#include <asm/unaligned.h>
+
 #include <linux/pci.h> 		/* To determine if a card is pci-e */
 #include <linux/log2.h>
 #include "ath5k.h"
@@ -870,6 +872,7 @@
 int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
 	struct ieee80211_channel *channel, bool change_channel)
 {
+	struct ath_common *common = ath5k_hw_common(ah);
 	u32 s_seq[10], s_ant, s_led[3], staid1_flags, tsf_up, tsf_lo;
 	u32 phy_tst1;
 	u8 mode, freq, ee_mode, ant[2];
@@ -1171,10 +1174,12 @@
 	ath5k_hw_reg_write(ah, s_led[2], AR5K_GPIODO);
 
 	/* Restore sta_id flags and preserve our mac address*/
-	ath5k_hw_reg_write(ah, AR5K_LOW_ID(ah->ah_sta_id),
-						AR5K_STA_ID0);
-	ath5k_hw_reg_write(ah, staid1_flags | AR5K_HIGH_ID(ah->ah_sta_id),
-						AR5K_STA_ID1);
+	ath5k_hw_reg_write(ah,
+			   get_unaligned_le32(common->macaddr),
+			   AR5K_STA_ID0);
+	ath5k_hw_reg_write(ah,
+			   staid1_flags | get_unaligned_le16(common->macaddr + 4),
+			   AR5K_STA_ID1);
 
 
 	/*
@@ -1182,8 +1187,7 @@
 	 */
 
 	/* Restore bssid and bssid mask */
-	/* XXX: add ah->aid once mac80211 gives this to us */
-	ath5k_hw_set_associd(ah, ah->ah_bssid, 0);
+	ath5k_hw_set_associd(ah);
 
 	/* Set PCU config */
 	ath5k_hw_set_opmode(ah);
@@ -1289,7 +1293,7 @@
 	 * out and/or noise floor calibration might timeout.
 	 */
 	AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_AGCCTL,
-				AR5K_PHY_AGCCTL_CAL);
+				AR5K_PHY_AGCCTL_CAL | AR5K_PHY_AGCCTL_NF);
 
 	/* At the same time start I/Q calibration for QAM constellation
 	 * -no need for CCK- */
@@ -1310,21 +1314,6 @@
 			channel->center_freq);
 	}
 
-	/*
-	 * If we run NF calibration before AGC, it always times out.
-	 * Binary HAL starts NF and AGC calibration at the same time
-	 * and only waits for AGC to finish. Also if AGC or NF cal.
-	 * times out, reset doesn't fail on binary HAL. I believe
-	 * that's wrong because since rx path is routed to a detector,
-	 * if cal. doesn't finish we won't have RX. Sam's HAL for AR5210/5211
-	 * enables noise floor calibration after offset calibration and if noise
-	 * floor calibration fails, reset fails. I believe that's
-	 * a better approach, we just need to find a polling interval
-	 * that suits best, even if reset continues we need to make
-	 * sure that rx path is ready.
-	 */
-	ath5k_hw_noise_floor_calibration(ah, channel->center_freq);
-
 	/* Restore antenna mode */
 	ath5k_hw_set_antenna_mode(ah, ah->ah_ant_mode);
 
diff --git a/drivers/net/wireless/ath/ath9k/Kconfig b/drivers/net/wireless/ath/ath9k/Kconfig
index ef5f59c..99ce066 100644
--- a/drivers/net/wireless/ath/ath9k/Kconfig
+++ b/drivers/net/wireless/ath/ath9k/Kconfig
@@ -1,6 +1,10 @@
+config ATH9K_HW
+	tristate
+
 config ATH9K
 	tristate "Atheros 802.11n wireless cards support"
 	depends on PCI && MAC80211 && WLAN_80211
+	select ATH9K_HW
 	select MAC80211_LEDS
 	select LEDS_CLASS
 	select NEW_LEDS
@@ -16,6 +20,8 @@
 
 	  If you choose to build a module, it'll be called ath9k.
 
+if ATH_DEBUG
+
 config ATH9K_DEBUG
 	bool "Atheros ath9k debugging"
 	depends on ATH9K
@@ -26,3 +32,5 @@
 	  modprobe ath9k debug=0x00000200
 
 	  Look in ath9k/debug.h for possible debug masks
+
+endif # ATH_DEBUG
diff --git a/drivers/net/wireless/ath/ath9k/Makefile b/drivers/net/wireless/ath/ath9k/Makefile
index ff2c9a2..8caf2a8 100644
--- a/drivers/net/wireless/ath/ath9k/Makefile
+++ b/drivers/net/wireless/ath/ath9k/Makefile
@@ -1,22 +1,25 @@
-ath9k-y +=	hw.o \
-		eeprom.o \
-		eeprom_def.o \
-		eeprom_4k.o \
-		eeprom_9287.o \
-		mac.o \
-		calib.o \
-		ani.o \
-		phy.o \
-		beacon.o \
+ath9k-y +=	beacon.o \
 		main.o \
 		recv.o \
 		xmit.o \
 		virtual.o \
-		rc.o \
-		btcoex.o
+		rc.o
 
 ath9k-$(CONFIG_PCI) += pci.o
 ath9k-$(CONFIG_ATHEROS_AR71XX) += ahb.o
 ath9k-$(CONFIG_ATH9K_DEBUG) += debug.o
 
 obj-$(CONFIG_ATH9K) += ath9k.o
+
+ath9k_hw-y:=	hw.o \
+		eeprom.o \
+		eeprom_def.o \
+		eeprom_4k.o \
+		eeprom_9287.o \
+		calib.o \
+		ani.o \
+		phy.o \
+		btcoex.o \
+		mac.o \
+
+obj-$(CONFIG_ATH9K_HW) += ath9k_hw.o
diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c
index 2ad7d02..25531f2 100644
--- a/drivers/net/wireless/ath/ath9k/ahb.c
+++ b/drivers/net/wireless/ath/ath9k/ahb.c
@@ -22,27 +22,29 @@
 #include "ath9k.h"
 
 /* return bus cachesize in 4B word units */
-static void ath_ahb_read_cachesize(struct ath_softc *sc, int *csz)
+static void ath_ahb_read_cachesize(struct ath_common *common, int *csz)
 {
 	*csz = L1_CACHE_BYTES >> 2;
 }
 
-static void ath_ahb_cleanup(struct ath_softc *sc)
+static void ath_ahb_cleanup(struct ath_common *common)
 {
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	iounmap(sc->mem);
 }
 
-static bool ath_ahb_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
+static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_softc *sc = ah->ah_sc;
+	struct ath_softc *sc = (struct ath_softc *)common->priv;
 	struct platform_device *pdev = to_platform_device(sc->dev);
 	struct ath9k_platform_data *pdata;
 
 	pdata = (struct ath9k_platform_data *) pdev->dev.platform_data;
 	if (off >= (ARRAY_SIZE(pdata->eeprom_data))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"%s: flash read failed, offset %08x is out of range\n",
-				__func__, off);
+		ath_print(common, ATH_DBG_FATAL,
+			  "%s: flash read failed, offset %08x "
+			  "is out of range\n",
+			  __func__, off);
 		return false;
 	}
 
@@ -116,10 +118,9 @@
 	sc->hw = hw;
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
-	sc->bus_ops = &ath_ahb_bus_ops;
 	sc->irq = irq;
 
-	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0);
+	ret = ath_init_device(AR5416_AR9100_DEVID, sc, 0x0, &ath_ahb_bus_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto err_free_hw;
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 2b49374..2a0cd64 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_get_ani_channel_idx(struct ath_hw *ah,
 					struct ath9k_channel *chan)
@@ -31,8 +31,8 @@
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"No more channel states left. Using channel 0\n");
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANI,
+		  "No more channel states left. Using channel 0\n");
 
 	return 0;
 }
@@ -41,16 +41,17 @@
 				 enum ath9k_ani_cmd cmd, int param)
 {
 	struct ar5416AniState *aniState = ah->curani;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	switch (cmd & ah->ani_function) {
 	case ATH9K_ANI_NOISE_IMMUNITY_LEVEL:{
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(ah->totalSizeDesired)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned)ARRAY_SIZE(ah->totalSizeDesired));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned)ARRAY_SIZE(ah->totalSizeDesired));
 			return false;
 		}
 
@@ -152,10 +153,10 @@
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(firstep)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned) ARRAY_SIZE(firstep));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned) ARRAY_SIZE(firstep));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_FIND_SIG,
@@ -174,11 +175,10 @@
 		u32 level = param;
 
 		if (level >= ARRAY_SIZE(cycpwrThr1)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"level out of range (%u > %u)\n",
-				level,
-				(unsigned)
-				ARRAY_SIZE(cycpwrThr1));
+			ath_print(common, ATH_DBG_ANI,
+				  "level out of range (%u > %u)\n",
+				  level,
+				  (unsigned) ARRAY_SIZE(cycpwrThr1));
 			return false;
 		}
 		REG_RMW_FIELD(ah, AR_PHY_TIMING5,
@@ -194,25 +194,28 @@
 	case ATH9K_ANI_PRESENT:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"invalid cmd %u\n", cmd);
+		ath_print(common, ATH_DBG_ANI,
+			  "invalid cmd %u\n", cmd);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "ANI parameters:\n");
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"noiseImmunityLevel=%d, spurImmunityLevel=%d, "
-		"ofdmWeakSigDetectOff=%d\n",
-		aniState->noiseImmunityLevel, aniState->spurImmunityLevel,
-		!aniState->ofdmWeakSigDetectOff);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"cckWeakSigThreshold=%d, "
-		"firstepLevel=%d, listenTime=%d\n",
-		aniState->cckWeakSigThreshold, aniState->firstepLevel,
-		aniState->listenTime);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
+	ath_print(common, ATH_DBG_ANI, "ANI parameters:\n");
+	ath_print(common, ATH_DBG_ANI,
+		  "noiseImmunityLevel=%d, spurImmunityLevel=%d, "
+		  "ofdmWeakSigDetectOff=%d\n",
+		  aniState->noiseImmunityLevel,
+		  aniState->spurImmunityLevel,
+		  !aniState->ofdmWeakSigDetectOff);
+	ath_print(common, ATH_DBG_ANI,
+		  "cckWeakSigThreshold=%d, "
+		  "firstepLevel=%d, listenTime=%d\n",
+		  aniState->cckWeakSigThreshold,
+		  aniState->firstepLevel,
+		  aniState->listenTime);
+	ath_print(common, ATH_DBG_ANI,
 		"cycleCount=%d, ofdmPhyErrCount=%d, cckPhyErrCount=%d\n\n",
-		aniState->cycleCount, aniState->ofdmPhyErrCount,
+		aniState->cycleCount,
+		aniState->ofdmPhyErrCount,
 		aniState->cckPhyErrCount);
 
 	return true;
@@ -231,6 +234,7 @@
 static void ath9k_ani_restart(struct ath_hw *ah)
 {
 	struct ar5416AniState *aniState;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!DO_ANI(ah))
 		return;
@@ -240,24 +244,24 @@
 
 	if (aniState->ofdmTrigHigh > AR_PHY_COUNTMAX) {
 		aniState->ofdmPhyErrBase = 0;
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"OFDM Trigger is too high for hw counters\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "OFDM Trigger is too high for hw counters\n");
 	} else {
 		aniState->ofdmPhyErrBase =
 			AR_PHY_COUNTMAX - aniState->ofdmTrigHigh;
 	}
 	if (aniState->cckTrigHigh > AR_PHY_COUNTMAX) {
 		aniState->cckPhyErrBase = 0;
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"CCK Trigger is too high for hw counters\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "CCK Trigger is too high for hw counters\n");
 	} else {
 		aniState->cckPhyErrBase =
 			AR_PHY_COUNTMAX - aniState->cckTrigHigh;
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Writing ofdmbase=%u   cckbase=%u\n",
-		aniState->ofdmPhyErrBase,
-		aniState->cckPhyErrBase);
+	ath_print(common, ATH_DBG_ANI,
+		  "Writing ofdmbase=%u   cckbase=%u\n",
+		  aniState->ofdmPhyErrBase,
+		  aniState->cckPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_1, aniState->ofdmPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_2, aniState->cckPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_MASK_1, AR_PHY_ERR_OFDM_TIMING);
@@ -271,7 +275,7 @@
 
 static void ath9k_hw_ani_ofdm_err_trigger(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	struct ar5416AniState *aniState;
 	int32_t rssi;
 
@@ -343,7 +347,7 @@
 
 static void ath9k_hw_ani_cck_err_trigger(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	struct ar5416AniState *aniState;
 	int32_t rssi;
 
@@ -464,6 +468,7 @@
 {
 	struct ar5416AniState *aniState;
 	struct ath9k_channel *chan = ah->curchan;
+	struct ath_common *common = ath9k_hw_common(ah);
 	int index;
 
 	if (!DO_ANI(ah))
@@ -475,8 +480,8 @@
 
 	if (DO_ANI(ah) && ah->opmode != NL80211_IFTYPE_STATION
 	    && ah->opmode != NL80211_IFTYPE_ADHOC) {
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Reset ANI state opmode %u\n", ah->opmode);
+		ath_print(common, ATH_DBG_ANI,
+			  "Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
 		if (ah->opmode == NL80211_IFTYPE_AP) {
@@ -543,6 +548,7 @@
 			  struct ath9k_channel *chan)
 {
 	struct ar5416AniState *aniState;
+	struct ath_common *common = ath9k_hw_common(ah);
 	int32_t listenTime;
 	u32 phyCnt1, phyCnt2;
 	u32 ofdmPhyErrCnt, cckPhyErrCnt;
@@ -569,20 +575,22 @@
 	if (phyCnt1 < aniState->ofdmPhyErrBase ||
 	    phyCnt2 < aniState->cckPhyErrBase) {
 		if (phyCnt1 < aniState->ofdmPhyErrBase) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"phyCnt1 0x%x, resetting "
-				"counter value to 0x%x\n",
-				phyCnt1, aniState->ofdmPhyErrBase);
+			ath_print(common, ATH_DBG_ANI,
+				  "phyCnt1 0x%x, resetting "
+				  "counter value to 0x%x\n",
+				  phyCnt1,
+				  aniState->ofdmPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_1,
 				  aniState->ofdmPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_1,
 				  AR_PHY_ERR_OFDM_TIMING);
 		}
 		if (phyCnt2 < aniState->cckPhyErrBase) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-				"phyCnt2 0x%x, resetting "
-				"counter value to 0x%x\n",
-				phyCnt2, aniState->cckPhyErrBase);
+			ath_print(common, ATH_DBG_ANI,
+				  "phyCnt2 0x%x, resetting "
+				  "counter value to 0x%x\n",
+				  phyCnt2,
+				  aniState->cckPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_2,
 				  aniState->cckPhyErrBase);
 			REG_WRITE(ah, AR_PHY_ERR_MASK_2,
@@ -621,10 +629,13 @@
 		}
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_ani_monitor);
 
 void ath9k_enable_mib_counters(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Enable MIB counters\n");
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_print(common, ATH_DBG_ANI, "Enable MIB counters\n");
 
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
 
@@ -640,7 +651,10 @@
 /* Freeze the MIB counters, get the stats and then clear them */
 void ath9k_hw_disable_mib_counters(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disable MIB counters\n");
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_print(common, ATH_DBG_ANI, "Disable MIB counters\n");
+
 	REG_WRITE(ah, AR_MIBC, AR_MIBC_FMC);
 	ath9k_hw_update_mibstats(ah, &ah->ah_mibStats);
 	REG_WRITE(ah, AR_MIBC, AR_MIBC_CMC);
@@ -653,6 +667,7 @@
 				  u32 *rxf_pcnt,
 				  u32 *txf_pcnt)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	static u32 cycles, rx_clear, rx_frame, tx_frame;
 	u32 good = 1;
 
@@ -662,8 +677,8 @@
 	u32 cc = REG_READ(ah, AR_CCCNT);
 
 	if (cycles == 0 || cycles > cc) {
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"cycle counter wrap. ExtBusy = 0\n");
+		ath_print(common, ATH_DBG_ANI,
+			  "cycle counter wrap. ExtBusy = 0\n");
 		good = 0;
 	} else {
 		u32 cc_d = cc - cycles;
@@ -742,6 +757,7 @@
 		ath9k_ani_restart(ah);
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_procmibevent);
 
 void ath9k_hw_ani_setup(struct ath_hw *ah)
 {
@@ -762,9 +778,10 @@
 
 void ath9k_hw_ani_init(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int i;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Initialize ANI\n");
+	ath_print(common, ATH_DBG_ANI, "Initialize ANI\n");
 
 	memset(ah->ani, 0, sizeof(ah->ani));
 	for (i = 0; i < ARRAY_SIZE(ah->ani); i++) {
@@ -786,11 +803,11 @@
 			AR_PHY_COUNTMAX - ATH9K_ANI_CCK_TRIG_HIGH;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Setting OfdmErrBase = 0x%08x\n",
-		ah->ani[0].ofdmPhyErrBase);
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
-		ah->ani[0].cckPhyErrBase);
+	ath_print(common, ATH_DBG_ANI,
+		  "Setting OfdmErrBase = 0x%08x\n",
+		  ah->ani[0].ofdmPhyErrBase);
+	ath_print(common, ATH_DBG_ANI, "Setting cckErrBase = 0x%08x\n",
+		  ah->ani[0].cckPhyErrBase);
 
 	REG_WRITE(ah, AR_PHY_ERR_1, ah->ani[0].ofdmPhyErrBase);
 	REG_WRITE(ah, AR_PHY_ERR_2, ah->ani[0].cckPhyErrBase);
@@ -803,7 +820,7 @@
 
 void ath9k_hw_ani_disable(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI, "Disabling ANI\n");
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANI, "Disabling ANI\n");
 
 	ath9k_hw_disable_mib_counters(ah);
 	REG_WRITE(ah, AR_PHY_ERR_1, 0);
diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h
index 1d59f10..13dd020 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
@@ -26,7 +26,7 @@
 #include "rc.h"
 #include "debug.h"
 #include "../ath.h"
-#include "btcoex.h"
+#include "../debug.h"
 
 struct ath_node;
 
@@ -54,15 +54,11 @@
 
 #define A_MAX(a, b) ((a) > (b) ? (a) : (b))
 
-#define ASSERT(exp) BUG_ON(!(exp))
-
 #define TSF_TO_TU(_h,_l) \
 	((((u32)(_h)) << 22) | (((u32)(_l)) >> 10))
 
 #define	ATH_TXQ_SETUP(sc, i)        ((sc)->tx.txqsetup & (1<<i))
 
-static const u8 ath_bcast_mac[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
-
 struct ath_config {
 	u32 ath_aggr_prot;
 	u16 txpowlimit;
@@ -191,7 +187,6 @@
 /* minimum h/w qdepth to be sustained to maximize aggregation */
 #define ATH_AGGR_MIN_QDEPTH        2
 #define ATH_AMPDU_SUBFRAME_DEFAULT 32
-#define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
 
 #define IEEE80211_SEQ_SEQ_SHIFT    4
 #define IEEE80211_SEQ_MAX          4096
@@ -293,7 +288,6 @@
 
 #define ATH_RSSI_LPF_LEN 		10
 #define RSSI_LPF_THRESHOLD		-20
-#define ATH9K_RSSI_BAD			0x80
 #define ATH_RSSI_EP_MULTIPLIER     (1<<7)
 #define ATH_EP_MUL(x, mul)         ((x) * (mul))
 #define ATH_RSSI_IN(x)             (ATH_EP_MUL((x), ATH_RSSI_EP_MULTIPLIER))
@@ -427,7 +421,6 @@
 
 void ath_beacon_tasklet(unsigned long data);
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif);
-int ath_beaconq_setup(struct ath_hw *ah);
 int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif);
 void ath_beacon_return(struct ath_softc *sc, struct ath_vif *avp);
 
@@ -451,6 +444,26 @@
 	struct timer_list timer;
 };
 
+/* Defines the BT AR_BT_COEX_WGHT used */
+enum ath_stomp_type {
+	ATH_BTCOEX_NO_STOMP,
+	ATH_BTCOEX_STOMP_ALL,
+	ATH_BTCOEX_STOMP_LOW,
+	ATH_BTCOEX_STOMP_NONE
+};
+
+struct ath_btcoex {
+	bool hw_timer_enabled;
+	spinlock_t btcoex_lock;
+	struct timer_list period_timer; /* Timer for BT period */
+	u32 bt_priority_cnt;
+	unsigned long bt_priority_time;
+	int bt_stomp_type; /* Types of BT stomping */
+	u32 btcoex_no_stomp; /* in usec */
+	u32 btcoex_period; /* in usec */
+	struct ath_gen_timer *no_stomp_timer; /* Timer for no BT stomping */
+};
+
 /********************/
 /*   LED Control    */
 /********************/
@@ -484,7 +497,6 @@
  * Used when PCI device not fully initialized by bootrom/BIOS
 */
 #define DEFAULT_CACHELINE       32
-#define	ATH_DEFAULT_NOISE_FLOOR -95
 #define ATH_REGCLASSIDS_MAX     10
 #define ATH_CABQ_READY_TIME     80      /* % of beacon interval */
 #define ATH_MAX_SW_RETRIES      10
@@ -522,23 +534,14 @@
 #define SC_OP_WAIT_FOR_PSPOLL_DATA BIT(17)
 #define SC_OP_WAIT_FOR_TX_ACK   BIT(18)
 #define SC_OP_BEACON_SYNC       BIT(19)
-#define SC_OP_BTCOEX_ENABLED    BIT(20)
 #define SC_OP_BT_PRIORITY_DETECTED BIT(21)
 
-struct ath_bus_ops {
-	void		(*read_cachesize)(struct ath_softc *sc, int *csz);
-	void		(*cleanup)(struct ath_softc *sc);
-	bool		(*eeprom_read)(struct ath_hw *ah, u32 off, u16 *data);
-};
-
 struct ath_wiphy;
 
 struct ath_softc {
 	struct ieee80211_hw *hw;
 	struct device *dev;
 
-	struct ath_common common;
-
 	spinlock_t wiphy_lock; /* spinlock to protect ath_wiphy data */
 	struct ath_wiphy *pri_wiphy;
 	struct ath_wiphy **sec_wiphy; /* secondary wiphys (virtual radios); may
@@ -565,24 +568,17 @@
 	spinlock_t sc_pm_lock;
 	struct mutex mutex;
 
-	u8 curbssid[ETH_ALEN];
-	u8 bssidmask[ETH_ALEN];
 	u32 intrstatus;
 	u32 sc_flags; /* SC_OP_* */
 	u16 curtxpow;
-	u16 curaid;
 	u8 nbcnvifs;
 	u16 nvifs;
-	u8 tx_chainmask;
-	u8 rx_chainmask;
 	u32 keymax;
 	DECLARE_BITMAP(keymap, ATH_KEYMAX);
 	u8 splitmic;
 	bool ps_enabled;
 	unsigned long ps_usecount;
 	enum ath9k_int imask;
-	enum ath9k_ht_extprotspacing ht_extprotspacing;
-	enum ath9k_ht_macmode tx_chan_width;
 
 	struct ath_config config;
 	struct ath_rx rx;
@@ -609,10 +605,9 @@
 #ifdef CONFIG_ATH9K_DEBUG
 	struct ath9k_debug debug;
 #endif
-	struct ath_bus_ops *bus_ops;
 	struct ath_beacon_config cur_beacon_conf;
 	struct delayed_work tx_complete_work;
-	struct ath_btcoex_info btcoex_info;
+	struct ath_btcoex btcoex;
 };
 
 struct ath_wiphy {
@@ -634,31 +629,22 @@
 int ath_get_mac80211_qnum(u32 queue, struct ath_softc *sc);
 int ath_cabq_update(struct ath_softc *);
 
-static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
+static inline void ath_read_cachesize(struct ath_common *common, int *csz)
 {
-	return &ah->ah_sc->common;
+	common->bus_ops->read_cachesize(common, csz);
 }
 
-static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
+static inline void ath_bus_cleanup(struct ath_common *common)
 {
-	return &(ath9k_hw_common(ah)->regulatory);
-}
-
-static inline void ath_read_cachesize(struct ath_softc *sc, int *csz)
-{
-	sc->bus_ops->read_cachesize(sc, csz);
-}
-
-static inline void ath_bus_cleanup(struct ath_softc *sc)
-{
-	sc->bus_ops->cleanup(sc);
+	common->bus_ops->cleanup(common);
 }
 
 extern struct ieee80211_ops ath9k_ops;
 
 irqreturn_t ath_isr(int irq, void *dev);
 void ath_cleanup(struct ath_softc *sc);
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid);
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops);
 void ath_detach(struct ath_softc *sc);
 const char *ath_mac_bb_name(u32 mac_bb_version);
 const char *ath_rf_name(u16 rf_version);
@@ -706,8 +692,5 @@
 void ath9k_wiphy_work(struct work_struct *work);
 bool ath9k_all_wiphys_idle(struct ath_softc *sc);
 
-void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val);
-unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset);
-
 int ath_tx_get_qnum(struct ath_softc *sc, int qtype, int haltype);
 #endif /* ATH9K_H */
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 45c4ea5..b10c884f 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -26,6 +26,7 @@
 static int ath_beaconq_config(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info qi;
 
 	ath9k_hw_get_txq_props(ah, sc->beacon.beaconq, &qi);
@@ -42,8 +43,8 @@
 	}
 
 	if (!ath9k_hw_set_txq_props(ah, sc->beacon.beaconq, &qi)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to update h/w beacon queue parameters\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to update h/w beacon queue parameters\n");
 		return 0;
 	} else {
 		ath9k_hw_resettxqueue(ah, sc->beacon.beaconq);
@@ -61,6 +62,7 @@
 {
 	struct sk_buff *skb = bf->bf_mpdu;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_desc *ds;
 	struct ath9k_11n_rate_series series[4];
 	const struct ath_rate_table *rt;
@@ -108,7 +110,7 @@
 	memset(series, 0, sizeof(struct ath9k_11n_rate_series) * 4);
 	series[0].Tries = 1;
 	series[0].Rate = rate;
-	series[0].ChSel = sc->tx_chainmask;
+	series[0].ChSel = common->tx_chainmask;
 	series[0].RateFlags = (ctsrate) ? ATH9K_RATESERIES_RTS_CTS : 0;
 	ath9k_hw_set11n_ratescenario(ah, ds, ds, 0, ctsrate, ctsduration,
 				     series, 4, 0);
@@ -119,6 +121,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_buf *bf;
 	struct ath_vif *avp;
 	struct sk_buff *skb;
@@ -172,7 +175,8 @@
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error on beaconing\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "dma_mapping_error on beaconing\n");
 		return NULL;
 	}
 
@@ -192,8 +196,8 @@
 
 	if (skb && cabq_depth) {
 		if (sc->nvifs > 1) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"Flushing previous cabq traffic\n");
+			ath_print(common, ATH_DBG_BEACON,
+				  "Flushing previous cabq traffic\n");
 			ath_draintxq(sc, cabq, false);
 		}
 	}
@@ -216,6 +220,7 @@
 				   struct ieee80211_vif *vif)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf;
 	struct ath_vif *avp;
 	struct sk_buff *skb;
@@ -233,25 +238,14 @@
 	/* NB: caller is known to have already stopped tx dma */
 	ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
 	ath9k_hw_txstart(ah, sc->beacon.beaconq);
-	DPRINTF(sc, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
-		sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
-}
-
-int ath_beaconq_setup(struct ath_hw *ah)
-{
-	struct ath9k_tx_queue_info qi;
-
-	memset(&qi, 0, sizeof(qi));
-	qi.tqi_aifs = 1;
-	qi.tqi_cwmin = 0;
-	qi.tqi_cwmax = 0;
-	/* NB: don't enable any interrupts */
-	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+	ath_print(common, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
+		  sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
 }
 
 int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
 {
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp;
 	struct ath_buf *bf;
 	struct sk_buff *skb;
@@ -309,7 +303,7 @@
 	/* NB: the beacon data buffer must be 32-bit aligned. */
 	skb = ieee80211_beacon_get(sc->hw, vif);
 	if (skb == NULL) {
-		DPRINTF(sc, ATH_DBG_BEACON, "cannot get skb\n");
+		ath_print(common, ATH_DBG_BEACON, "cannot get skb\n");
 		return -ENOMEM;
 	}
 
@@ -333,9 +327,10 @@
 		tsfadjust = intval * avp->av_bslot / ATH_BCBUF;
 		avp->tsf_adjust = cpu_to_le64(TU_TO_USEC(tsfadjust));
 
-		DPRINTF(sc, ATH_DBG_BEACON,
-			"stagger beacons, bslot %d intval %u tsfadjust %llu\n",
-			avp->av_bslot, intval, (unsigned long long)tsfadjust);
+		ath_print(common, ATH_DBG_BEACON,
+			  "stagger beacons, bslot %d intval "
+			  "%u tsfadjust %llu\n",
+			  avp->av_bslot, intval, (unsigned long long)tsfadjust);
 
 		((struct ieee80211_mgmt *)skb->data)->u.beacon.timestamp =
 			avp->tsf_adjust;
@@ -349,8 +344,8 @@
 	if (unlikely(dma_mapping_error(sc->dev, bf->bf_buf_addr))) {
 		dev_kfree_skb_any(skb);
 		bf->bf_mpdu = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"dma_mapping_error on beacon alloc\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "dma_mapping_error on beacon alloc\n");
 		return -ENOMEM;
 	}
 
@@ -386,6 +381,7 @@
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf = NULL;
 	struct ieee80211_vif *vif;
 	struct ath_wiphy *aphy;
@@ -405,12 +401,12 @@
 		sc->beacon.bmisscnt++;
 
 		if (sc->beacon.bmisscnt < BSTUCK_THRESH) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"missed %u consecutive beacons\n",
-				sc->beacon.bmisscnt);
+			ath_print(common, ATH_DBG_BEACON,
+				  "missed %u consecutive beacons\n",
+				  sc->beacon.bmisscnt);
 		} else if (sc->beacon.bmisscnt >= BSTUCK_THRESH) {
-			DPRINTF(sc, ATH_DBG_BEACON,
-				"beacon is officially stuck\n");
+			ath_print(common, ATH_DBG_BEACON,
+				  "beacon is officially stuck\n");
 			sc->sc_flags |= SC_OP_TSF_RESET;
 			ath_reset(sc, false);
 		}
@@ -419,9 +415,9 @@
 	}
 
 	if (sc->beacon.bmisscnt != 0) {
-		DPRINTF(sc, ATH_DBG_BEACON,
-			"resume beacon xmit after %u misses\n",
-			sc->beacon.bmisscnt);
+		ath_print(common, ATH_DBG_BEACON,
+			  "resume beacon xmit after %u misses\n",
+			  sc->beacon.bmisscnt);
 		sc->beacon.bmisscnt = 0;
 	}
 
@@ -447,9 +443,9 @@
 	vif = sc->beacon.bslot[slot];
 	aphy = sc->beacon.bslot_aphy[slot];
 
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
-		slot, tsf, tsftu, intval, vif);
+	ath_print(common, ATH_DBG_BEACON,
+		  "slot %d [tsf %llu tsftu %u intval %u] vif %p\n",
+		  slot, tsf, tsftu, intval, vif);
 
 	bfaddr = 0;
 	if (vif) {
@@ -490,7 +486,7 @@
 		 * are still pending on the queue.
 		 */
 		if (!ath9k_hw_stoptxdma(ah, sc->beacon.beaconq)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
+			ath_print(common, ATH_DBG_FATAL,
 				"beacon queue %u did not stop?\n", sc->beacon.beaconq);
 		}
 
@@ -502,6 +498,19 @@
 	}
 }
 
+static void ath9k_beacon_init(struct ath_softc *sc,
+			      u32 next_beacon,
+			      u32 beacon_period)
+{
+	if (beacon_period & ATH9K_BEACON_RESET_TSF)
+		ath9k_ps_wakeup(sc);
+
+	ath9k_hw_beaconinit(sc->sc_ah, next_beacon, beacon_period);
+
+	if (beacon_period & ATH9K_BEACON_RESET_TSF)
+		ath9k_ps_restore(sc);
+}
+
 /*
  * For multi-bss ap support beacons are either staggered evenly over N slots or
  * burst together.  For the former arrange for the SWBA to be delivered for each
@@ -534,7 +543,7 @@
 	/* Set the computed AP beacon timers */
 
 	ath9k_hw_set_interrupts(sc->sc_ah, 0);
-	ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
@@ -555,6 +564,7 @@
 static void ath_beacon_config_sta(struct ath_softc *sc,
 				  struct ath_beacon_config *conf)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_beacon_state bs;
 	int dtimperiod, dtimcount, sleepduration;
 	int cfpperiod, cfpcount;
@@ -651,11 +661,11 @@
 	/* TSF out of range threshold fixed at 1 second */
 	bs.bs_tsfoor_threshold = ATH9K_TSFOOR_THRESHOLD;
 
-	DPRINTF(sc, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
-		bs.bs_bmissthreshold, bs.bs_sleepduration,
-		bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
+	ath_print(common, ATH_DBG_BEACON, "tsf: %llu tsftu: %u\n", tsf, tsftu);
+	ath_print(common, ATH_DBG_BEACON,
+		  "bmiss: %u sleep: %u cfp-period: %u maxdur: %u next: %u\n",
+		  bs.bs_bmissthreshold, bs.bs_sleepduration,
+		  bs.bs_cfpperiod, bs.bs_cfpmaxduration, bs.bs_cfpnext);
 
 	/* Set the computed STA beacon timers */
 
@@ -669,6 +679,7 @@
 				    struct ath_beacon_config *conf,
 				    struct ieee80211_vif *vif)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u64 tsf;
 	u32 tsftu, intval, nexttbtt;
 
@@ -689,9 +700,9 @@
 		nexttbtt += intval;
 	} while (nexttbtt < tsftu);
 
-	DPRINTF(sc, ATH_DBG_BEACON,
-		"IBSS nexttbtt %u intval %u (%u)\n",
-		nexttbtt, intval, conf->beacon_interval);
+	ath_print(common, ATH_DBG_BEACON,
+		  "IBSS nexttbtt %u intval %u (%u)\n",
+		  nexttbtt, intval, conf->beacon_interval);
 
 	/*
 	 * In IBSS mode enable the beacon timers but only enable SWBA interrupts
@@ -707,7 +718,7 @@
 	/* Set the computed ADHOC beacon timers */
 
 	ath9k_hw_set_interrupts(sc->sc_ah, 0);
-	ath9k_hw_beaconinit(sc->sc_ah, nexttbtt, intval);
+	ath9k_beacon_init(sc, nexttbtt, intval);
 	sc->beacon.bmisscnt = 0;
 	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
 
@@ -719,6 +730,7 @@
 void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)
 {
 	struct ath_beacon_config *cur_conf = &sc->cur_beacon_conf;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	enum nl80211_iftype iftype;
 
 	/* Setup the beacon configuration parameters */
@@ -759,8 +771,8 @@
 		ath_beacon_config_sta(sc, cur_conf);
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_CONFIG,
-			"Unsupported beaconing mode\n");
+		ath_print(common, ATH_DBG_CONFIG,
+			  "Unsupported beaconing mode\n");
 		return;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.c b/drivers/net/wireless/ath/ath9k/btcoex.c
index 55f607b..fb4ac15 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.c
+++ b/drivers/net/wireless/ath/ath9k/btcoex.c
@@ -14,10 +14,26 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
-static const struct ath_btcoex_config ath_bt_config = { 0, true, true,
-			ATH_BT_COEX_MODE_SLOTTED, true, true, 2, 5, true };
+enum ath_bt_mode {
+	ATH_BT_COEX_MODE_LEGACY,        /* legacy rx_clear mode */
+	ATH_BT_COEX_MODE_UNSLOTTED,     /* untimed/unslotted mode */
+	ATH_BT_COEX_MODE_SLOTTED,       /* slotted mode */
+	ATH_BT_COEX_MODE_DISALBED,      /* coexistence disabled */
+};
+
+struct ath_btcoex_config {
+	u8 bt_time_extend;
+	bool bt_txstate_extend;
+	bool bt_txframe_extend;
+	enum ath_bt_mode bt_mode; /* coexistence mode */
+	bool bt_quiet_collision;
+	bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
+	u8 bt_priority_time;
+	u8 bt_first_slot_time;
+	bool bt_hold_rx_clear;
+};
 
 static const u16 ath_subsysid_tbl[] = {
 	AR9280_COEX2WIRE_SUBSYSID,
@@ -29,141 +45,38 @@
  * Checks the subsystem id of the device to see if it
  * supports btcoex
  */
-bool ath_btcoex_supported(u16 subsysid)
+bool ath9k_hw_btcoex_supported(struct ath_hw *ah)
 {
 	int i;
 
-	if (!subsysid)
+	if (!ah->hw_version.subsysid)
 		return false;
 
 	for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
-		if (subsysid == ath_subsysid_tbl[i])
+		if (ah->hw_version.subsysid == ath_subsysid_tbl[i])
 			return true;
 
 	return false;
 }
 
-/*
- * Detects if there is any priority bt traffic
- */
-static void ath_detect_bt_priority(struct ath_softc *sc)
+void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
 {
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	if (ath9k_hw_gpio_get(sc->sc_ah, btinfo->btpriority_gpio))
-		btinfo->bt_priority_cnt++;
-
-	if (time_after(jiffies, btinfo->bt_priority_time +
-			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
-		if (btinfo->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
-			DPRINTF(sc, ATH_DBG_BTCOEX,
-				"BT priority traffic detected");
-			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
-		} else {
-			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-		}
-
-		btinfo->bt_priority_cnt = 0;
-		btinfo->bt_priority_time = jiffies;
-	}
-}
-
-/*
- * Configures appropriate weight based on stomp type.
- */
-static void ath_btcoex_bt_stomp(struct ath_softc *sc,
-				struct ath_btcoex_info *btinfo,
-				int stomp_type)
-{
-
-	switch (stomp_type) {
-	case ATH_BTCOEX_STOMP_ALL:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_ALL_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_LOW:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_LOW_WLAN_WGHT);
-		break;
-	case ATH_BTCOEX_STOMP_NONE:
-		ath_btcoex_set_weight(btinfo, AR_BT_COEX_WGHT,
-				      AR_STOMP_NONE_WLAN_WGHT);
-		break;
-	default:
-		DPRINTF(sc, ATH_DBG_BTCOEX, "Invalid Stomptype\n");
-		break;
-	}
-
-	ath9k_hw_btcoex_enable(sc->sc_ah);
-}
-
-/*
- * This is the master bt coex timer which runs for every
- * 45ms, bt traffic will be given priority during 55% of this
- * period while wlan gets remaining 45%
- */
-
-static void ath_btcoex_period_timer(unsigned long data)
-{
-	struct ath_softc *sc = (struct ath_softc *) data;
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	ath_detect_bt_priority(sc);
-
-	spin_lock_bh(&btinfo->btcoex_lock);
-
-	ath_btcoex_bt_stomp(sc, btinfo, btinfo->bt_stomp_type);
-
-	spin_unlock_bh(&btinfo->btcoex_lock);
-
-	if (btinfo->btcoex_period != btinfo->btcoex_no_stomp) {
-		if (btinfo->hw_timer_enabled)
-			ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-		ath_gen_timer_start(sc->sc_ah,
-			btinfo->no_stomp_timer,
-			(ath9k_hw_gettsf32(sc->sc_ah) +
-				btinfo->btcoex_no_stomp),
-				btinfo->btcoex_no_stomp * 10);
-		btinfo->hw_timer_enabled = true;
-	}
-
-	mod_timer(&btinfo->period_timer, jiffies +
-				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
-}
-
-/*
- * Generic tsf based hw timer which configures weight
- * registers to time slice between wlan and bt traffic
- */
-
-static void ath_btcoex_no_stomp_timer(void *arg)
-{
-	struct ath_softc *sc = (struct ath_softc *)arg;
-	struct ath_btcoex_info *btinfo = &sc->btcoex_info;
-
-	DPRINTF(sc, ATH_DBG_BTCOEX, "no stomp timer running \n");
-
-	spin_lock_bh(&btinfo->btcoex_lock);
-
-	if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
-		ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_NONE);
-	 else if (btinfo->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
-		ath_btcoex_bt_stomp(sc, btinfo, ATH_BTCOEX_STOMP_LOW);
-
-	spin_unlock_bh(&btinfo->btcoex_lock);
-}
-
-static int ath_init_btcoex_info(struct ath_hw *hw,
-				struct ath_btcoex_info *btcoex_info)
-{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+	const struct ath_btcoex_config ath_bt_config = {
+		.bt_time_extend = 0,
+		.bt_txstate_extend = true,
+		.bt_txframe_extend = true,
+		.bt_mode = ATH_BT_COEX_MODE_SLOTTED,
+		.bt_quiet_collision = true,
+		.bt_rxclear_polarity = true,
+		.bt_priority_time = 2,
+		.bt_first_slot_time = 5,
+		.bt_hold_rx_clear = true,
+	};
 	u32 i;
-	int qnum;
 
-	qnum = ath_tx_get_qnum(hw->ah_sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
-
-	btcoex_info->bt_coex_mode =
-		(btcoex_info->bt_coex_mode & AR_BT_QCU_THRESH) |
+	btcoex_hw->bt_coex_mode =
+		(btcoex_hw->bt_coex_mode & AR_BT_QCU_THRESH) |
 		SM(ath_bt_config.bt_time_extend, AR_BT_TIME_EXTEND) |
 		SM(ath_bt_config.bt_txstate_extend, AR_BT_TXSTATE_EXTEND) |
 		SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) |
@@ -174,167 +87,141 @@
 		SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) |
 		SM(qnum, AR_BT_QCU_THRESH);
 
-	btcoex_info->bt_coex_mode2 =
+	btcoex_hw->bt_coex_mode2 =
 		SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) |
 		SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) |
 		AR_BT_DISABLE_BT_ANT;
 
-	btcoex_info->bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
-
-	btcoex_info->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
-
-	btcoex_info->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
-		btcoex_info->btcoex_period / 100;
-
 	for (i = 0; i < 32; i++)
-		hw->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
+		ah->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
+}
+EXPORT_SYMBOL(ath9k_hw_init_btcoex_hw);
 
-	setup_timer(&btcoex_info->period_timer, ath_btcoex_period_timer,
-			(unsigned long) hw->ah_sc);
+void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	btcoex_info->no_stomp_timer = ath_gen_timer_alloc(hw,
-			ath_btcoex_no_stomp_timer,
-			ath_btcoex_no_stomp_timer,
-			(void *)hw->ah_sc, AR_FIRST_NDP_TIMER);
+	/* connect bt_active to baseband */
+	REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    (AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
+		     AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
 
-	if (btcoex_info->no_stomp_timer == NULL)
-		return -ENOMEM;
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+		    AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
 
-	spin_lock_init(&btcoex_info->btcoex_lock);
+	/* Set input mux for bt_active to gpio pin */
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+		      AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+		      btcoex_hw->btactive_gpio);
 
-	return 0;
+	/* Configure the desired gpio port for input */
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_init_2wire);
+
+void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+
+	/* btcoex 3-wire */
+	REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
+			(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
+			 AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
+
+	/* Set input mux for bt_prority_async and
+	 *                  bt_active_async to GPIO pins */
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+			AR_GPIO_INPUT_MUX1_BT_ACTIVE,
+			btcoex_hw->btactive_gpio);
+
+	REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
+			AR_GPIO_INPUT_MUX1_BT_PRIORITY,
+			btcoex_hw->btpriority_gpio);
+
+	/* Configure the desired GPIO ports for input */
+
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
+	ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btpriority_gpio);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_init_3wire);
+
+static void ath9k_hw_btcoex_enable_2wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
+
+	/* Configure the desired GPIO port for TX_FRAME output */
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
+			    AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
 }
 
-int ath9k_hw_btcoex_init(struct ath_hw *ah)
+void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
+				u32 bt_weight,
+				u32 wlan_weight)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
-	int ret = 0;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
-		/* connect bt_active to baseband */
-		REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
-				 AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
+	btcoex_hw->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
+				     SM(wlan_weight, AR_BTCOEX_WL_WGHT);
+}
+EXPORT_SYMBOL(ath9k_hw_btcoex_set_weight);
 
-		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
+static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
+{
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-		/* Set input mux for bt_active to gpio pin */
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-				btcoex_info->btactive_gpio);
+	/*
+	 * Program coex mode and weight registers to
+	 * enable coex 3-wire
+	 */
+	REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_hw->bt_coex_mode);
+	REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
+	REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_hw->bt_coex_mode2);
 
-		/* Configure the desired gpio port for input */
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
-	} else {
-		/* btcoex 3-wire */
-		REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
-				(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
-				 AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
+	REG_RMW_FIELD(ah, AR_QUIET1, AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
+	REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
 
-		/* Set input mux for bt_prority_async and
-		 *                  bt_active_async to GPIO pins */
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_ACTIVE,
-				btcoex_info->btactive_gpio);
-
-		REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
-				AR_GPIO_INPUT_MUX1_BT_PRIORITY,
-				btcoex_info->btpriority_gpio);
-
-		/* Configure the desired GPIO ports for input */
-
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btactive_gpio);
-		ath9k_hw_cfg_gpio_input(ah, btcoex_info->btpriority_gpio);
-
-		ret = ath_init_btcoex_info(ah, btcoex_info);
-	}
-
-	return ret;
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
+			    AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
 }
 
 void ath9k_hw_btcoex_enable(struct ath_hw *ah)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_2WIRE) {
-		/* Configure the desired GPIO port for TX_FRAME output */
-		ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
-				AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
-	} else {
-		/*
-		 * Program coex mode and weight registers to
-		 * enable coex 3-wire
-		 */
-		REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_info->bt_coex_mode);
-		REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_info->bt_coex_weights);
-		REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_info->bt_coex_mode2);
-
-		REG_RMW_FIELD(ah, AR_QUIET1,
-				AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
-		REG_RMW_FIELD(ah, AR_PCU_MISC,
-				AR_PCU_BT_ANT_PREVENT_RX, 0);
-
-		ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
-				AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
+	switch (btcoex_hw->scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_enable_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_enable_3wire(ah);
+		break;
 	}
 
 	REG_RMW(ah, AR_GPIO_PDPU,
-		(0x2 << (btcoex_info->btactive_gpio * 2)),
-		(0x3 << (btcoex_info->btactive_gpio * 2)));
+		(0x2 << (btcoex_hw->btactive_gpio * 2)),
+		(0x3 << (btcoex_hw->btactive_gpio * 2)));
 
-	ah->ah_sc->sc_flags |= SC_OP_BTCOEX_ENABLED;
+	ah->btcoex_hw.enabled = true;
 }
+EXPORT_SYMBOL(ath9k_hw_btcoex_enable);
 
 void ath9k_hw_btcoex_disable(struct ath_hw *ah)
 {
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
-	ath9k_hw_set_gpio(ah, btcoex_info->wlanactive_gpio, 0);
+	ath9k_hw_set_gpio(ah, btcoex_hw->wlanactive_gpio, 0);
 
-	ath9k_hw_cfg_output(ah, btcoex_info->wlanactive_gpio,
+	ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
 			AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
 
-	if (btcoex_info->btcoex_scheme == ATH_BTCOEX_CFG_3WIRE) {
+	if (btcoex_hw->scheme == ATH_BTCOEX_CFG_3WIRE) {
 		REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE);
 		REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
 		REG_WRITE(ah, AR_BT_COEX_MODE2, 0);
 	}
 
-	ah->ah_sc->sc_flags &= ~SC_OP_BTCOEX_ENABLED;
+	ah->btcoex_hw.enabled = false;
 }
-
-/*
- * Pause btcoex timer and bt duty cycle timer
- */
-void ath_btcoex_timer_pause(struct ath_softc *sc,
-			    struct ath_btcoex_info *btinfo)
-{
-
-	del_timer_sync(&btinfo->period_timer);
-
-	if (btinfo->hw_timer_enabled)
-		ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-	btinfo->hw_timer_enabled = false;
-}
-
-/*
- * (Re)start btcoex timers
- */
-void ath_btcoex_timer_resume(struct ath_softc *sc,
-			     struct ath_btcoex_info *btinfo)
-{
-
-	DPRINTF(sc, ATH_DBG_BTCOEX, "Starting btcoex timers");
-
-	/* make sure duty cycle timer is also stopped when resuming */
-	if (btinfo->hw_timer_enabled)
-		ath_gen_timer_stop(sc->sc_ah, btinfo->no_stomp_timer);
-
-	btinfo->bt_priority_cnt = 0;
-	btinfo->bt_priority_time = jiffies;
-	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
-
-	mod_timer(&btinfo->period_timer, jiffies);
-}
+EXPORT_SYMBOL(ath9k_hw_btcoex_disable);
diff --git a/drivers/net/wireless/ath/ath9k/btcoex.h b/drivers/net/wireless/ath/ath9k/btcoex.h
index 297b027..1ba31a7 100644
--- a/drivers/net/wireless/ath/ath9k/btcoex.h
+++ b/drivers/net/wireless/ath/ath9k/btcoex.h
@@ -17,6 +17,8 @@
 #ifndef BTCOEX_H
 #define BTCOEX_H
 
+#include "hw.h"
+
 #define ATH_WLANACTIVE_GPIO	5
 #define ATH_BTACTIVE_GPIO	6
 #define ATH_BTPRIORITY_GPIO	7
@@ -34,67 +36,25 @@
 	ATH_BTCOEX_CFG_3WIRE,
 };
 
-enum ath_stomp_type {
-	ATH_BTCOEX_NO_STOMP,
-	ATH_BTCOEX_STOMP_ALL,
-	ATH_BTCOEX_STOMP_LOW,
-	ATH_BTCOEX_STOMP_NONE
-};
-
-enum ath_bt_mode {
-	ATH_BT_COEX_MODE_LEGACY,	/* legacy rx_clear mode */
-	ATH_BT_COEX_MODE_UNSLOTTED,	/* untimed/unslotted mode */
-	ATH_BT_COEX_MODE_SLOTTED,	/* slotted mode */
-	ATH_BT_COEX_MODE_DISALBED,	/* coexistence disabled */
-};
-
-struct ath_btcoex_config {
-	u8 bt_time_extend;
-	bool bt_txstate_extend;
-	bool bt_txframe_extend;
-	enum ath_bt_mode bt_mode; /* coexistence mode */
-	bool bt_quiet_collision;
-	bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
-	u8 bt_priority_time;
-	u8 bt_first_slot_time;
-	bool bt_hold_rx_clear;
-};
-
-struct ath_btcoex_info {
-	enum ath_btcoex_scheme btcoex_scheme;
+struct ath_btcoex_hw {
+	enum ath_btcoex_scheme scheme;
+	bool enabled;
 	u8 wlanactive_gpio;
 	u8 btactive_gpio;
 	u8 btpriority_gpio;
-	u8 bt_duty_cycle; 	/* BT duty cycle in percentage */
-	int bt_stomp_type; 	/* Types of BT stomping */
 	u32 bt_coex_mode; 	/* Register setting for AR_BT_COEX_MODE */
 	u32 bt_coex_weights; 	/* Register setting for AR_BT_COEX_WEIGHT */
 	u32 bt_coex_mode2; 	/* Register setting for AR_BT_COEX_MODE2 */
-	u32 btcoex_no_stomp;   /* in usec */
-	u32 btcoex_period;     	/* in usec */
-	u32 bt_priority_cnt;
-	unsigned long bt_priority_time;
-	bool hw_timer_enabled;
-	spinlock_t btcoex_lock;
-	struct timer_list period_timer;      /* Timer for BT period */
-	struct ath_gen_timer *no_stomp_timer; /*Timer for no BT stomping*/
 };
 
-bool ath_btcoex_supported(u16 subsysid);
-int ath9k_hw_btcoex_init(struct ath_hw *ah);
+bool ath9k_hw_btcoex_supported(struct ath_hw *ah);
+void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah);
+void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah);
+void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum);
+void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
+				u32 bt_weight,
+				u32 wlan_weight);
 void ath9k_hw_btcoex_enable(struct ath_hw *ah);
 void ath9k_hw_btcoex_disable(struct ath_hw *ah);
-void ath_btcoex_timer_resume(struct ath_softc *sc,
-			     struct ath_btcoex_info *btinfo);
-void ath_btcoex_timer_pause(struct ath_softc *sc,
-			    struct ath_btcoex_info *btinfo);
-
-static inline void ath_btcoex_set_weight(struct ath_btcoex_info *btcoex_info,
-					 u32 bt_weight,
-					 u32 wlan_weight)
-{
-	btcoex_info->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
-				       SM(wlan_weight, AR_BTCOEX_WL_WGHT);
-}
 
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c
index 0ad6d0b..551f8801 100644
--- a/drivers/net/wireless/ath/ath9k/calib.c
+++ b/drivers/net/wireless/ath/ath9k/calib.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 /* We can tune this as we go by monitoring really low values */
 #define ATH9K_NF_TOO_LOW	-60
@@ -26,11 +26,11 @@
 static bool ath9k_hw_nf_in_range(struct ath_hw *ah, s16 nf)
 {
 	if (nf > ATH9K_NF_TOO_LOW) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"noise floor value detected (%d) is "
-			"lower than what we think is a "
-			"reasonable value (%d)\n",
-			nf, ATH9K_NF_TOO_LOW);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "noise floor value detected (%d) is "
+			  "lower than what we think is a "
+			  "reasonable value (%d)\n",
+			  nf, ATH9K_NF_TOO_LOW);
 		return false;
 	}
 	return true;
@@ -89,6 +89,7 @@
 static void ath9k_hw_do_getnf(struct ath_hw *ah,
 			      int16_t nfarray[NUM_NF_READINGS])
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int16_t nf;
 
 	if (AR_SREV_9280_10_OR_LATER(ah))
@@ -98,8 +99,8 @@
 
 	if (nf & 0x100)
 		nf = 0 - ((nf ^ 0x1ff) + 1);
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"NF calibrated [ctl] [chain 0] is %d\n", nf);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "NF calibrated [ctl] [chain 0] is %d\n", nf);
 	nfarray[0] = nf;
 
 	if (!AR_SREV_9285(ah)) {
@@ -112,8 +113,8 @@
 
 		if (nf & 0x100)
 			nf = 0 - ((nf ^ 0x1ff) + 1);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ctl] [chain 1] is %d\n", nf);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF calibrated [ctl] [chain 1] is %d\n", nf);
 		nfarray[1] = nf;
 
 		if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
@@ -121,8 +122,8 @@
 					AR_PHY_CH2_MINCCA_PWR);
 			if (nf & 0x100)
 				nf = 0 - ((nf ^ 0x1ff) + 1);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ctl] [chain 2] is %d\n", nf);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "NF calibrated [ctl] [chain 2] is %d\n", nf);
 			nfarray[2] = nf;
 		}
 	}
@@ -136,8 +137,8 @@
 
 	if (nf & 0x100)
 		nf = 0 - ((nf ^ 0x1ff) + 1);
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"NF calibrated [ext] [chain 0] is %d\n", nf);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "NF calibrated [ext] [chain 0] is %d\n", nf);
 	nfarray[3] = nf;
 
 	if (!AR_SREV_9285(ah)) {
@@ -150,8 +151,8 @@
 
 		if (nf & 0x100)
 			nf = 0 - ((nf ^ 0x1ff) + 1);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ext] [chain 1] is %d\n", nf);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF calibrated [ext] [chain 1] is %d\n", nf);
 		nfarray[4] = nf;
 
 		if (!AR_SREV_9280(ah) && !AR_SREV_9287(ah)) {
@@ -159,8 +160,8 @@
 					AR_PHY_CH2_EXT_MINCCA_PWR);
 			if (nf & 0x100)
 				nf = 0 - ((nf ^ 0x1ff) + 1);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"NF calibrated [ext] [chain 2] is %d\n", nf);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "NF calibrated [ext] [chain 2] is %d\n", nf);
 			nfarray[5] = nf;
 		}
 	}
@@ -188,6 +189,8 @@
 static void ath9k_hw_setup_calibration(struct ath_hw *ah,
 				       struct ath9k_cal_list *currCal)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(0),
 		      AR_PHY_TIMING_CTRL4_IQCAL_LOG_COUNT_MAX,
 		      currCal->calData->calCountMax);
@@ -195,23 +198,23 @@
 	switch (currCal->calData->calType) {
 	case IQ_MISMATCH_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_IQ);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting IQ Mismatch Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting IQ Mismatch Calibration\n");
 		break;
 	case ADC_GAIN_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_GAIN);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting ADC Gain Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting ADC Gain Calibration\n");
 		break;
 	case ADC_DC_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_PER);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting ADC DC Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting ADC DC Calibration\n");
 		break;
 	case ADC_DC_INIT_CAL:
 		REG_WRITE(ah, AR_PHY_CALMODE, AR_PHY_CALMODE_ADC_DC_INIT);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"starting Init ADC DC Calibration\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "starting Init ADC DC Calibration\n");
 		break;
 	}
 
@@ -278,7 +281,7 @@
 static bool ath9k_hw_iscal_supported(struct ath_hw *ah,
 				     enum ath9k_cal_types calType)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	switch (calType & ah->supp_cals) {
 	case IQ_MISMATCH_CAL: /* Both 2 GHz and 5 GHz support OFDM */
@@ -304,11 +307,11 @@
 			REG_READ(ah, AR_PHY_CAL_MEAS_1(i));
 		ah->totalIqCorrMeas[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_2(i));
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
-			ah->cal_samples, i, ah->totalPowerMeasI[i],
-			ah->totalPowerMeasQ[i],
-			ah->totalIqCorrMeas[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d pmi=0x%08x;pmq=0x%08x;iqcm=0x%08x;\n",
+			  ah->cal_samples, i, ah->totalPowerMeasI[i],
+			  ah->totalPowerMeasQ[i],
+			  ah->totalIqCorrMeas[i]);
 	}
 }
 
@@ -326,14 +329,14 @@
 		ah->totalAdcQEvenPhase[i] +=
 			REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			"oddq=0x%08x; evenq=0x%08x;\n",
-			ah->cal_samples, i,
-			ah->totalAdcIOddPhase[i],
-			ah->totalAdcIEvenPhase[i],
-			ah->totalAdcQOddPhase[i],
-			ah->totalAdcQEvenPhase[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			  "oddq=0x%08x; evenq=0x%08x;\n",
+			  ah->cal_samples, i,
+			  ah->totalAdcIOddPhase[i],
+			  ah->totalAdcIEvenPhase[i],
+			  ah->totalAdcQOddPhase[i],
+			  ah->totalAdcQEvenPhase[i]);
 	}
 }
 
@@ -351,19 +354,20 @@
 		ah->totalAdcDcOffsetQEvenPhase[i] +=
 			(int32_t) REG_READ(ah, AR_PHY_CAL_MEAS_3(i));
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
-			"oddq=0x%08x; evenq=0x%08x;\n",
-			ah->cal_samples, i,
-			ah->totalAdcDcOffsetIOddPhase[i],
-			ah->totalAdcDcOffsetIEvenPhase[i],
-			ah->totalAdcDcOffsetQOddPhase[i],
-			ah->totalAdcDcOffsetQEvenPhase[i]);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_CALIBRATE,
+			  "%d: Chn %d oddi=0x%08x; eveni=0x%08x; "
+			  "oddq=0x%08x; evenq=0x%08x;\n",
+			  ah->cal_samples, i,
+			  ah->totalAdcDcOffsetIOddPhase[i],
+			  ah->totalAdcDcOffsetIEvenPhase[i],
+			  ah->totalAdcDcOffsetQOddPhase[i],
+			  ah->totalAdcDcOffsetQEvenPhase[i]);
 	}
 }
 
 static void ath9k_hw_iqcalibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 powerMeasQ, powerMeasI, iqCorrMeas;
 	u32 qCoffDenom, iCoffDenom;
 	int32_t qCoff, iCoff;
@@ -374,13 +378,13 @@
 		powerMeasQ = ah->totalPowerMeasQ[i];
 		iqCorrMeas = ah->totalIqCorrMeas[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting IQ Cal and Correction for Chain %d\n",
-			i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Starting IQ Cal and Correction for Chain %d\n",
+			  i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Orignal: Chn %diq_corr_meas = 0x%08x\n",
-			i, ah->totalIqCorrMeas[i]);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Orignal: Chn %diq_corr_meas = 0x%08x\n",
+			  i, ah->totalIqCorrMeas[i]);
 
 		iqCorrNeg = 0;
 
@@ -389,27 +393,28 @@
 			iqCorrNeg = 1;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
-			iqCorrNeg);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_i = 0x%08x\n", i, powerMeasI);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_q = 0x%08x\n", i, powerMeasQ);
+		ath_print(common, ATH_DBG_CALIBRATE, "iqCorrNeg is 0x%08x\n",
+			  iqCorrNeg);
 
 		iCoffDenom = (powerMeasI / 2 + powerMeasQ / 2) / 128;
 		qCoffDenom = powerMeasQ / 64;
 
-		if (powerMeasQ != 0) {
+		if ((powerMeasQ != 0) && (iCoffDenom != 0) &&
+		    (qCoffDenom != 0)) {
 			iCoff = iqCorrMeas / iCoffDenom;
 			qCoff = powerMeasI / qCoffDenom - 64;
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d iCoff = 0x%08x\n", i, iCoff);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d qCoff = 0x%08x\n", i, qCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d qCoff = 0x%08x\n", i, qCoff);
 
 			iCoff = iCoff & 0x3f;
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"New: Chn %d iCoff = 0x%08x\n", i, iCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "New: Chn %d iCoff = 0x%08x\n", i, iCoff);
 			if (iqCorrNeg == 0x0)
 				iCoff = 0x40 - iCoff;
 
@@ -418,9 +423,9 @@
 			else if (qCoff <= -16)
 				qCoff = 16;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
-				i, iCoff, qCoff);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d : iCoff = 0x%x  qCoff = 0x%x\n",
+				  i, iCoff, qCoff);
 
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_I_COFF,
@@ -428,9 +433,9 @@
 			REG_RMW_FIELD(ah, AR_PHY_TIMING_CTRL4(i),
 				      AR_PHY_TIMING_CTRL4_IQCORR_Q_Q_COFF,
 				      qCoff);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"IQ Cal and Correction done for Chain %d\n",
-				i);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "IQ Cal and Correction done for Chain %d\n",
+				  i);
 		}
 	}
 
@@ -440,6 +445,7 @@
 
 static void ath9k_hw_adc_gaincal_calibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 iOddMeasOffset, iEvenMeasOffset, qOddMeasOffset, qEvenMeasOffset;
 	u32 qGainMismatch, iGainMismatch, val, i;
 
@@ -449,21 +455,21 @@
 		qOddMeasOffset = ah->totalAdcQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcQEvenPhase[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting ADC Gain Cal for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Starting ADC Gain Cal for Chain %d\n", i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_i = 0x%08x\n", i,
-			iOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_i = 0x%08x\n", i,
-			iEvenMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_q = 0x%08x\n", i,
-			qOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_q = 0x%08x\n", i,
-			qEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_i = 0x%08x\n", i,
+			  iOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_i = 0x%08x\n", i,
+			  iEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_q = 0x%08x\n", i,
+			  qOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_q = 0x%08x\n", i,
+			  qEvenMeasOffset);
 
 		if (iOddMeasOffset != 0 && qEvenMeasOffset != 0) {
 			iGainMismatch =
@@ -473,20 +479,20 @@
 				((qOddMeasOffset * 32) /
 				 qEvenMeasOffset) & 0x3f;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d gain_mismatch_i = 0x%08x\n", i,
-				iGainMismatch);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"Chn %d gain_mismatch_q = 0x%08x\n", i,
-				qGainMismatch);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d gain_mismatch_i = 0x%08x\n", i,
+				  iGainMismatch);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "Chn %d gain_mismatch_q = 0x%08x\n", i,
+				  qGainMismatch);
 
 			val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 			val &= 0xfffff000;
 			val |= (qGainMismatch) | (iGainMismatch << 6);
 			REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"ADC Gain Cal done for Chain %d\n", i);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "ADC Gain Cal done for Chain %d\n", i);
 		}
 	}
 
@@ -497,6 +503,7 @@
 
 static void ath9k_hw_adc_dccal_calibrate(struct ath_hw *ah, u8 numChains)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 iOddMeasOffset, iEvenMeasOffset, val, i;
 	int32_t qOddMeasOffset, qEvenMeasOffset, qDcMismatch, iDcMismatch;
 	const struct ath9k_percal_data *calData =
@@ -510,41 +517,41 @@
 		qOddMeasOffset = ah->totalAdcDcOffsetQOddPhase[i];
 		qEvenMeasOffset = ah->totalAdcDcOffsetQEvenPhase[i];
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Starting ADC DC Offset Cal for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			   "Starting ADC DC Offset Cal for Chain %d\n", i);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_i = %d\n", i,
-			iOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_i = %d\n", i,
-			iEvenMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_odd_q = %d\n", i,
-			qOddMeasOffset);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d pwr_meas_even_q = %d\n", i,
-			qEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_i = %d\n", i,
+			  iOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_i = %d\n", i,
+			  iEvenMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_odd_q = %d\n", i,
+			  qOddMeasOffset);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d pwr_meas_even_q = %d\n", i,
+			  qEvenMeasOffset);
 
 		iDcMismatch = (((iEvenMeasOffset - iOddMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 		qDcMismatch = (((qOddMeasOffset - qEvenMeasOffset) * 2) /
 			       numSamples) & 0x1ff;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
-			iDcMismatch);
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
-			qDcMismatch);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d dc_offset_mismatch_i = 0x%08x\n", i,
+			  iDcMismatch);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Chn %d dc_offset_mismatch_q = 0x%08x\n", i,
+			  qDcMismatch);
 
 		val = REG_READ(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i));
 		val &= 0xc0000fff;
 		val |= (qDcMismatch << 12) | (iDcMismatch << 21);
 		REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(i), val);
 
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"ADC DC Offset Cal done for Chain %d\n", i);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "ADC DC Offset Cal done for Chain %d\n", i);
 	}
 
 	REG_WRITE(ah, AR_PHY_NEW_ADC_DC_GAIN_CORR(0),
@@ -555,7 +562,8 @@
 /* This is done for the currently configured channel */
 bool ath9k_hw_reset_calvalid(struct ath_hw *ah)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	struct ath9k_cal_list *currCal = ah->cal_list_curr;
 
 	if (!ah->curchan)
@@ -568,24 +576,25 @@
 		return true;
 
 	if (currCal->calState != CAL_DONE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"Calibration state incorrect, %d\n",
-			currCal->calState);
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "Calibration state incorrect, %d\n",
+			  currCal->calState);
 		return true;
 	}
 
 	if (!ath9k_hw_iscal_supported(ah, currCal->calData->calType))
 		return true;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-		"Resetting Cal %d state for channel %u\n",
-		currCal->calData->calType, conf->channel->center_freq);
+	ath_print(common, ATH_DBG_CALIBRATE,
+		  "Resetting Cal %d state for channel %u\n",
+		  currCal->calData->calType, conf->channel->center_freq);
 
 	ah->curchan->CalValid &= ~currCal->calData->calType;
 	currCal->calState = CAL_WAITING;
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_reset_calvalid);
 
 void ath9k_hw_start_nfcal(struct ath_hw *ah)
 {
@@ -645,11 +654,11 @@
 		    AR_PHY_AGC_CONTROL_NO_UPDATE_NF);
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF);
 
-	for (j = 0; j < 1000; j++) {
+	for (j = 0; j < 5; j++) {
 		if ((REG_READ(ah, AR_PHY_AGC_CONTROL) &
 		     AR_PHY_AGC_CONTROL_NF) == 0)
 			break;
-		udelay(10);
+		udelay(50);
 	}
 
 	for (i = 0; i < NUM_NF_READINGS; i++) {
@@ -665,6 +674,7 @@
 int16_t ath9k_hw_getnf(struct ath_hw *ah,
 		       struct ath9k_channel *chan)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int16_t nf, nfThresh;
 	int16_t nfarray[NUM_NF_READINGS] = { 0 };
 	struct ath9k_nfcal_hist *h;
@@ -672,8 +682,8 @@
 
 	chan->channelFlags &= (~CHANNEL_CW_INT);
 	if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-			"NF did not complete in calibration window\n");
+		ath_print(common, ATH_DBG_CALIBRATE,
+			  "NF did not complete in calibration window\n");
 		nf = 0;
 		chan->rawNoiseFloor = nf;
 		return chan->rawNoiseFloor;
@@ -682,10 +692,10 @@
 		nf = nfarray[0];
 		if (getNoiseFloorThresh(ah, c->band, &nfThresh)
 		    && nf > nfThresh) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"noise floor failed detected; "
-				"detected %d, threshold %d\n",
-				nf, nfThresh);
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "noise floor failed detected; "
+				  "detected %d, threshold %d\n",
+				  nf, nfThresh);
 			chan->channelFlags |= CHANNEL_CW_INT;
 		}
 	}
@@ -737,51 +747,73 @@
 
 	return nf;
 }
+EXPORT_SYMBOL(ath9k_hw_getchan_noise);
 
-static void ath9k_olc_temp_compensation(struct ath_hw *ah)
+static void ath9k_olc_temp_compensation_9287(struct ath_hw *ah)
 {
-	u32 rddata, i;
-	int delta, currPDADC, regval, slope;
+	u32 rddata;
+	int32_t delta, currPDADC, slope;
 
 	rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
 	currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
 
+	if (ah->initPDADC == 0 || currPDADC == 0) {
+		/*
+		 * Zero value indicates that no frames have been transmitted yet,
+		 * can't do temperature compensation until frames are transmitted.
+		 */
+		return;
+	} else {
+		slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
+
+		if (slope == 0) { /* to avoid divide by zero case */
+			delta = 0;
+		} else {
+			delta = ((currPDADC - ah->initPDADC)*4) / slope;
+		}
+		REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
+			      AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+		REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
+			      AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
+	}
+}
+
+static void ath9k_olc_temp_compensation(struct ath_hw *ah)
+{
+	u32 rddata, i;
+	int delta, currPDADC, regval;
 
 	if (OLC_FOR_AR9287_10_LATER) {
+		ath9k_olc_temp_compensation_9287(ah);
+	} else {
+		rddata = REG_READ(ah, AR_PHY_TX_PWRCTRL4);
+		currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
+
 		if (ah->initPDADC == 0 || currPDADC == 0) {
 			return;
 		} else {
-			slope = ah->eep_ops->get_eeprom(ah, EEP_TEMPSENSE_SLOPE);
-			if (slope == 0)
-				delta = 0;
+			if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
+				delta = (currPDADC - ah->initPDADC + 4) / 8;
 			else
-				delta = ((currPDADC - ah->initPDADC)*4) / slope;
-			REG_RMW_FIELD(ah, AR_PHY_CH0_TX_PWRCTRL11,
-					AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
-			REG_RMW_FIELD(ah, AR_PHY_CH1_TX_PWRCTRL11,
-					AR_PHY_TX_PWRCTRL_OLPC_TEMP_COMP, delta);
-		}
-	} else {
-		if (ah->eep_ops->get_eeprom(ah, EEP_DAC_HPWR_5G))
-			delta = (currPDADC - ah->initPDADC + 4) / 8;
-		else
-			delta = (currPDADC - ah->initPDADC + 5) / 10;
+				delta = (currPDADC - ah->initPDADC + 5) / 10;
 
-		if (delta != ah->PDADCdelta) {
-			ah->PDADCdelta = delta;
-			for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
-				regval = ah->originalGain[i] - delta;
-				if (regval < 0)
-					regval = 0;
+			if (delta != ah->PDADCdelta) {
+				ah->PDADCdelta = delta;
+				for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
+					regval = ah->originalGain[i] - delta;
+					if (regval < 0)
+						regval = 0;
 
-				REG_RMW_FIELD(ah, AR_PHY_TX_GAIN_TBL1 + i * 4,
-						AR_PHY_TX_GAIN, regval);
+					REG_RMW_FIELD(ah,
+						      AR_PHY_TX_GAIN_TBL1 + i * 4,
+						      AR_PHY_TX_GAIN, regval);
+				}
 			}
 		}
 	}
 }
 
-static void ath9k_hw_9271_pa_cal(struct ath_hw *ah)
+static void ath9k_hw_9271_pa_cal(struct ath_hw *ah, bool is_reset)
 {
 	u32 regVal;
 	unsigned int i;
@@ -857,10 +889,19 @@
 		REG_WRITE(ah, 0x7834, regVal);
 	}
 
-	/*  Empirical offset correction  */
-#if 0
-	REG_RMW_FIELD(ah, AR9285_AN_RF2G6, AR9271_AN_RF2G6_OFFS, 0x20);
-#endif
+	regVal = (regVal >>20) & 0x7f;
+
+	/* Update PA cal info */
+	if ((!is_reset) && (ah->pacal_info.prev_offset == regVal)) {
+		if (ah->pacal_info.max_skipcount < MAX_PACAL_SKIPCOUNT)
+			ah->pacal_info.max_skipcount =
+				2 * ah->pacal_info.max_skipcount;
+		ah->pacal_info.skipcount = ah->pacal_info.max_skipcount;
+	} else {
+		ah->pacal_info.max_skipcount = 1;
+		ah->pacal_info.skipcount = 0;
+		ah->pacal_info.prev_offset = regVal;
+	}
 
 	regVal = REG_READ(ah, 0x7834);
 	regVal |= 0x1;
@@ -875,7 +916,7 @@
 
 static inline void ath9k_hw_9285_pa_cal(struct ath_hw *ah, bool is_reset)
 {
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 regVal;
 	int i, offset, offs_6_1, offs_0;
 	u32 ccomp_org, reg_field;
@@ -889,7 +930,7 @@
 		{ 0x7838, 0 },
 	};
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
+	ath_print(common, ATH_DBG_CALIBRATE, "Running PA Calibration\n");
 
 	/* PA CAL is not needed for high power solution */
 	if (ah->eep_ops->get_eeprom(ah, EEP_TXGAIN_TYPE) ==
@@ -1011,7 +1052,7 @@
 	if (longcal) {
 		/* Do periodic PAOffset Cal */
 		if (AR_SREV_9271(ah))
-			ath9k_hw_9271_pa_cal(ah);
+			ath9k_hw_9271_pa_cal(ah, false);
 		else if (AR_SREV_9285_11_OR_LATER(ah)) {
 			if (!ah->pacal_info.skipcount)
 				ath9k_hw_9285_pa_cal(ah, false);
@@ -1036,9 +1077,13 @@
 
 	return iscaldone;
 }
+EXPORT_SYMBOL(ath9k_hw_calibrate);
 
+/* Carrier leakage Calibration fix */
 static bool ar9285_clc(struct ath_hw *ah, struct ath9k_channel *chan)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE);
 	if (IS_CHAN_HT20(chan)) {
 		REG_SET_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_PARALLEL_CAL_ENABLE);
@@ -1049,9 +1094,9 @@
 		REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
 				  AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "offset "
-				"calibration failed to complete in "
-				"1ms; noisy ??\n");
+			ath_print(common, ATH_DBG_CALIBRATE, "offset "
+				  "calibration failed to complete in "
+				  "1ms; noisy ??\n");
 			return false;
 		}
 		REG_CLR_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
@@ -1064,8 +1109,8 @@
 	REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL);
 	if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 			  0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE, "offset calibration "
-				"failed to complete in 1ms; noisy ??\n");
+		ath_print(common, ATH_DBG_CALIBRATE, "offset calibration "
+			  "failed to complete in 1ms; noisy ??\n");
 		return false;
 	}
 
@@ -1078,7 +1123,9 @@
 
 bool ath9k_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan)
 {
-	if (AR_SREV_9285_12_OR_LATER(ah)) {
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (AR_SREV_9271(ah) || AR_SREV_9285_12_OR_LATER(ah)) {
 		if (!ar9285_clc(ah, chan))
 			return false;
 	} else {
@@ -1098,9 +1145,9 @@
 		/* Poll for offset calibration complete */
 		if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
 				   0, AH_WAIT_TIMEOUT)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"offset calibration failed to complete in 1ms; "
-				"noisy environment?\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "offset calibration failed to "
+				  "complete in 1ms; noisy environment?\n");
 			return false;
 		}
 
@@ -1114,7 +1161,9 @@
 	}
 
 	/* Do PA Calibration */
-	if (AR_SREV_9285_11_OR_LATER(ah))
+	if (AR_SREV_9271(ah))
+		ath9k_hw_9271_pa_cal(ah, true);
+	else if (AR_SREV_9285_11_OR_LATER(ah))
 		ath9k_hw_9285_pa_cal(ah, true);
 
 	/* Do NF Calibration after DC offset and other calibrations */
@@ -1128,20 +1177,20 @@
 		if (ath9k_hw_iscal_supported(ah, ADC_GAIN_CAL)) {
 			INIT_CAL(&ah->adcgain_caldata);
 			INSERT_CAL(ah, &ah->adcgain_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling ADC Gain Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling ADC Gain Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, ADC_DC_CAL)) {
 			INIT_CAL(&ah->adcdc_caldata);
 			INSERT_CAL(ah, &ah->adcdc_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling ADC DC Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling ADC DC Calibration.\n");
 		}
 		if (ath9k_hw_iscal_supported(ah, IQ_MISMATCH_CAL)) {
 			INIT_CAL(&ah->iq_caldata);
 			INSERT_CAL(ah, &ah->iq_caldata);
-			DPRINTF(ah->ah_sc, ATH_DBG_CALIBRATE,
-				"enabling IQ Calibration.\n");
+			ath_print(common, ATH_DBG_CALIBRATE,
+				  "enabling IQ Calibration.\n");
 		}
 
 		ah->cal_list_curr = ah->cal_list;
diff --git a/drivers/net/wireless/ath/ath9k/calib.h b/drivers/net/wireless/ath/ath9k/calib.h
index 9028ab1..b2c873e 100644
--- a/drivers/net/wireless/ath/ath9k/calib.h
+++ b/drivers/net/wireless/ath/ath9k/calib.h
@@ -17,6 +17,8 @@
 #ifndef CALIB_H
 #define CALIB_H
 
+#include "hw.h"
+
 extern const struct ath9k_percal_data iq_cal_multi_sample;
 extern const struct ath9k_percal_data iq_cal_single_sample;
 extern const struct ath9k_percal_data adc_gain_cal_multi_sample;
diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c
index 2be4c22..84f4426 100644
--- a/drivers/net/wireless/ath/ath9k/debug.c
+++ b/drivers/net/wireless/ath/ath9k/debug.c
@@ -18,26 +18,13 @@
 
 #include "ath9k.h"
 
-static unsigned int ath9k_debug = DBG_DEFAULT;
-module_param_named(debug, ath9k_debug, uint, 0);
+#define REG_WRITE_D(_ah, _reg, _val) \
+	ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
+#define REG_READ_D(_ah, _reg) \
+	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
 static struct dentry *ath9k_debugfs_root;
 
-void DPRINTF(struct ath_softc *sc, int dbg_mask, const char *fmt, ...)
-{
-	if (!sc)
-		return;
-
-	if (sc->debug.debug_mask & dbg_mask) {
-		va_list args;
-
-		va_start(args, fmt);
-		printk(KERN_DEBUG "ath9k: ");
-		vprintk(fmt, args);
-		va_end(args);
-	}
-}
-
 static int ath9k_debugfs_open(struct inode *inode, struct file *file)
 {
 	file->private_data = inode->i_private;
@@ -48,10 +35,11 @@
 			     size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	char buf[32];
 	unsigned int len;
 
-	len = snprintf(buf, sizeof(buf), "0x%08x\n", sc->debug.debug_mask);
+	len = snprintf(buf, sizeof(buf), "0x%08x\n", common->debug_mask);
 	return simple_read_from_buffer(user_buf, count, ppos, buf, len);
 }
 
@@ -59,6 +47,7 @@
 			     size_t count, loff_t *ppos)
 {
 	struct ath_softc *sc = file->private_data;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	unsigned long mask;
 	char buf[32];
 	ssize_t len;
@@ -71,7 +60,7 @@
 	if (strict_strtoul(buf, 0, &mask))
 		return -EINVAL;
 
-	sc->debug.debug_mask = mask;
+	common->debug_mask = mask;
 	return count;
 }
 
@@ -95,7 +84,7 @@
 
 	ath9k_ps_wakeup(sc);
 
-	REG_WRITE(ah, AR_MACMISC,
+	REG_WRITE_D(ah, AR_MACMISC,
 		  ((AR_MACMISC_DMA_OBS_LINE_8 << AR_MACMISC_DMA_OBS_S) |
 		   (AR_MACMISC_MISC_OBS_BUS_1 <<
 		    AR_MACMISC_MISC_OBS_BUS_MSB_S)));
@@ -107,7 +96,7 @@
 		if (i % 4 == 0)
 			len += snprintf(buf + len, sizeof(buf) - len, "\n");
 
-		val[i] = REG_READ(ah, AR_DMADBG_0 + (i * sizeof(u32)));
+		val[i] = REG_READ_D(ah, AR_DMADBG_0 + (i * sizeof(u32)));
 		len += snprintf(buf + len, sizeof(buf) - len, "%d: %08x ",
 				i, val[i]);
 	}
@@ -157,9 +146,9 @@
 		(val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17);
 
 	len += snprintf(buf + len, sizeof(buf) - len, "pcu observe: 0x%x \n",
-			REG_READ(ah, AR_OBS_BUS_1));
+			REG_READ_D(ah, AR_OBS_BUS_1));
 	len += snprintf(buf + len, sizeof(buf) - len,
-			"AR_CR: 0x%x \n", REG_READ(ah, AR_CR));
+			"AR_CR: 0x%x \n", REG_READ_D(ah, AR_CR));
 
 	ath9k_ps_restore(sc);
 
@@ -376,12 +365,12 @@
 				aphy->chan_idx, aphy->chan_is_ht);
 	}
 
-	put_unaligned_le32(REG_READ(sc->sc_ah, AR_STA_ID0), addr);
-	put_unaligned_le16(REG_READ(sc->sc_ah, AR_STA_ID1) & 0xffff, addr + 4);
+	put_unaligned_le32(REG_READ_D(sc->sc_ah, AR_STA_ID0), addr);
+	put_unaligned_le16(REG_READ_D(sc->sc_ah, AR_STA_ID1) & 0xffff, addr + 4);
 	len += snprintf(buf + len, sizeof(buf) - len,
 			"addr: %pM\n", addr);
-	put_unaligned_le32(REG_READ(sc->sc_ah, AR_BSSMSKL), addr);
-	put_unaligned_le16(REG_READ(sc->sc_ah, AR_BSSMSKU) & 0xffff, addr + 4);
+	put_unaligned_le32(REG_READ_D(sc->sc_ah, AR_BSSMSKL), addr);
+	put_unaligned_le16(REG_READ_D(sc->sc_ah, AR_BSSMSKU) & 0xffff, addr + 4);
 	len += snprintf(buf + len, sizeof(buf) - len,
 			"addrmask: %pM\n", addr);
 
@@ -568,9 +557,10 @@
 	.owner = THIS_MODULE
 };
 
-int ath9k_init_debug(struct ath_softc *sc)
+int ath9k_init_debug(struct ath_hw *ah)
 {
-	sc->debug.debug_mask = ath9k_debug;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 
 	if (!ath9k_debugfs_root)
 		return -ENOENT;
@@ -619,12 +609,15 @@
 
 	return 0;
 err:
-	ath9k_exit_debug(sc);
+	ath9k_exit_debug(ah);
 	return -ENOMEM;
 }
 
-void ath9k_exit_debug(struct ath_softc *sc)
+void ath9k_exit_debug(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
 	debugfs_remove(sc->debug.debugfs_xmit);
 	debugfs_remove(sc->debug.debugfs_wiphy);
 	debugfs_remove(sc->debug.debugfs_rcstat);
diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h
index 7241f47..749e85d 100644
--- a/drivers/net/wireless/ath/ath9k/debug.h
+++ b/drivers/net/wireless/ath/ath9k/debug.h
@@ -17,25 +17,7 @@
 #ifndef DEBUG_H
 #define DEBUG_H
 
-enum ATH_DEBUG {
-	ATH_DBG_RESET		= 0x00000001,
-	ATH_DBG_QUEUE		= 0x00000002,
-	ATH_DBG_EEPROM		= 0x00000004,
-	ATH_DBG_CALIBRATE	= 0x00000008,
-	ATH_DBG_INTERRUPT	= 0x00000010,
-	ATH_DBG_REGULATORY	= 0x00000020,
-	ATH_DBG_ANI		= 0x00000040,
-	ATH_DBG_XMIT		= 0x00000080,
-	ATH_DBG_BEACON		= 0x00000100,
-	ATH_DBG_CONFIG		= 0x00000200,
-	ATH_DBG_FATAL		= 0x00000400,
-	ATH_DBG_PS		= 0x00000800,
-	ATH_DBG_HWTIMER		= 0x00001000,
-	ATH_DBG_BTCOEX		= 0x00002000,
-	ATH_DBG_ANY		= 0xffffffff
-};
-
-#define DBG_DEFAULT (ATH_DBG_FATAL)
+#include "hw.h"
 
 struct ath_txq;
 struct ath_buf;
@@ -140,7 +122,6 @@
 };
 
 struct ath9k_debug {
-	int debug_mask;
 	struct dentry *debugfs_phy;
 	struct dentry *debugfs_debug;
 	struct dentry *debugfs_dma;
@@ -151,9 +132,9 @@
 	struct ath_stats stats;
 };
 
-void DPRINTF(struct ath_softc *sc, int dbg_mask, const char *fmt, ...);
-int ath9k_init_debug(struct ath_softc *sc);
-void ath9k_exit_debug(struct ath_softc *sc);
+int ath9k_init_debug(struct ath_hw *ah);
+void ath9k_exit_debug(struct ath_hw *ah);
+
 int ath9k_debug_create_root(void);
 void ath9k_debug_remove_root(void);
 void ath_debug_stat_interrupt(struct ath_softc *sc, enum ath9k_int status);
@@ -165,17 +146,12 @@
 
 #else
 
-static inline void DPRINTF(struct ath_softc *sc, int dbg_mask,
-			   const char *fmt, ...)
-{
-}
-
-static inline int ath9k_init_debug(struct ath_softc *sc)
+static inline int ath9k_init_debug(struct ath_hw *ah)
 {
 	return 0;
 }
 
-static inline void ath9k_exit_debug(struct ath_softc *sc)
+static inline void ath9k_exit_debug(struct ath_hw *ah)
 {
 }
 
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.c b/drivers/net/wireless/ath/ath9k/eeprom.c
index b6e52d0..dacaae9 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static inline u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz)
 {
@@ -83,11 +83,9 @@
 	return false;
 }
 
-bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data)
+bool ath9k_hw_nvram_read(struct ath_common *common, u32 off, u16 *data)
 {
-	struct ath_softc *sc = ah->ah_sc;
-
-	return sc->bus_ops->eeprom_read(ah, off, data);
+	return common->bus_ops->eeprom_read(common, off, data);
 }
 
 void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h
index 4fe33f7..2f2993b 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom.h
+++ b/drivers/net/wireless/ath/ath9k/eeprom.h
@@ -17,6 +17,7 @@
 #ifndef EEPROM_H
 #define EEPROM_H
 
+#include "../ath.h"
 #include <net/cfg80211.h>
 
 #define AH_USE_EEPROM   0x1
@@ -133,6 +134,7 @@
 #define AR5416_EEP_MINOR_VER_17      0x11
 #define AR5416_EEP_MINOR_VER_19      0x13
 #define AR5416_EEP_MINOR_VER_20      0x14
+#define AR5416_EEP_MINOR_VER_21      0x15
 #define AR5416_EEP_MINOR_VER_22      0x16
 
 #define AR5416_NUM_5G_CAL_PIERS         8
@@ -153,7 +155,7 @@
 #define AR5416_BCHAN_UNUSED             0xFF
 #define AR5416_MAX_PWR_RANGE_IN_HALF_DB 64
 #define AR5416_MAX_CHAINS               3
-#define AR5416_PWR_TABLE_OFFSET         -5
+#define AR5416_PWR_TABLE_OFFSET_DB     -5
 
 /* Rx gain type values */
 #define AR5416_EEP_RXGAIN_23DB_BACKOFF     0
@@ -301,7 +303,7 @@
 	u8 txGainType;
 	u8 rcChainMask;
 	u8 desiredScaleCCK;
-	u8 power_table_offset;
+	u8 pwr_table_offset;
 	u8 frac_n_5g;
 	u8 futureBase_3[21];
 } __packed;
@@ -638,6 +640,7 @@
 } __packed;
 
 enum reg_ext_bitmap {
+	REG_EXT_FCC_MIDBAND = 0,
 	REG_EXT_JAPAN_MIDBAND = 1,
 	REG_EXT_FCC_DFS_HT40 = 2,
 	REG_EXT_JAPAN_NONDFS_HT40 = 3,
@@ -684,7 +687,7 @@
 			     int16_t targetRight);
 bool ath9k_hw_get_lower_upper_index(u8 target, u8 *pList, u16 listSize,
 				    u16 *indexL, u16 *indexR);
-bool ath9k_hw_nvram_read(struct ath_hw *ah, u32 off, u16 *data);
+bool ath9k_hw_nvram_read(struct ath_common *common, u32 off, u16 *data);
 void ath9k_hw_fill_vpd_table(u8 pwrMin, u8 pwrMax, u8 *pPwrList,
 			     u8 *pVpdList, u16 numIntercepts,
 			     u8 *pRetVpdList);
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
index b8eca7b..58167d8 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_4k_get_eeprom_ver(struct ath_hw *ah)
 {
@@ -29,20 +29,21 @@
 static bool ath9k_hw_4k_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_4K (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data = (u16 *)&ah->eeprom.map4k;
 	int addr, eep_start_loc = 0;
 
 	eep_start_loc = 64;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Reading from EEPROM, not flash\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < SIZE_EEPROM_4K; addr++) {
-		if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			       "Unable to read eeprom region \n");
+		if (!ath9k_hw_nvram_read(common, addr + eep_start_loc, eep_data)) {
+			ath_print(common, ATH_DBG_EEPROM,
+				  "Unable to read eeprom region \n");
 			return false;
 		}
 		eep_data++;
@@ -55,6 +56,7 @@
 static int ath9k_hw_4k_check_eeprom(struct ath_hw *ah)
 {
 #define EEPROM_4K_SIZE (sizeof(struct ar5416_eeprom_4k) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_4k *eep =
 		(struct ar5416_eeprom_4k *) &ah->eeprom.map4k;
 	u16 *eepdata, temp, magic, magic2;
@@ -64,15 +66,15 @@
 
 
 	if (!ath9k_hw_use_flash(ah)) {
-		if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET,
+		if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET,
 					 &magic)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Reading Magic # failed\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Reading Magic # failed\n");
 			return false;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -87,16 +89,16 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		need_swap ? "True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		  need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map4k.baseEepHeader.length);
@@ -117,8 +119,8 @@
 		u32 integer;
 		u16 word;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "EEPROM Endianness is not native.. Changing\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -160,9 +162,9 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			  sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -208,6 +210,8 @@
 		return pBase->rxMask;
 	case EEP_FRAC_N_5G:
 		return 0;
+	case EEP_PWR_TABLE_OFFSET:
+		return AR5416_PWR_TABLE_OFFSET_DB;
 	default:
 		return 0;
 	}
@@ -385,6 +389,7 @@
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_4k *pEepData = &ah->eeprom.map4k;
 	struct cal_data_per_freq_4k *pRawDataset;
 	u8 *pCalBChans = NULL;
@@ -470,21 +475,21 @@
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC (%d,%4x): %4.4x %8.8x\n",
-					i, regChainOffset, regOffset,
-					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC: Chain %d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d |\n",
-					i, 4 * j, pdadcValues[4 * j],
-					4 * j + 1, pdadcValues[4 * j + 1],
-					4 * j + 2, pdadcValues[4 * j + 2],
-					4 * j + 3,
-					pdadcValues[4 * j + 3]);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC (%d,%4x): %4.4x %8.8x\n",
+					  i, regChainOffset, regOffset,
+					  reg32);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC: Chain %d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d |\n",
+					  i, 4 * j, pdadcValues[4 * j],
+					  4 * j + 1, pdadcValues[4 * j + 1],
+					  4 * j + 2, pdadcValues[4 * j + 2],
+					  4 * j + 3,
+					  pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -750,7 +755,7 @@
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		for (i = 0; i < Ar5416RateSize; i++)
-			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET_DB * 2;
 	}
 
 	/* OFDM power per rate */
@@ -1148,20 +1153,21 @@
 {
 #define EEP_MAP4K_SPURCHAN \
 	(ah->eeprom.map4k.modalHeader.spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP4K_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
index c20c21a..839d05a 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static int ath9k_hw_AR9287_get_eeprom_ver(struct ath_hw *ah)
 {
@@ -29,20 +29,22 @@
 static bool ath9k_hw_AR9287_fill_eeprom(struct ath_hw *ah)
 {
 	struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data;
 	int addr, eep_start_loc = AR9287_EEP_START_LOC;
 	eep_data = (u16 *)eep;
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Reading from EEPROM, not flash\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Reading from EEPROM, not flash\n");
 	}
 
 	for (addr = 0; addr < sizeof(struct ar9287_eeprom) / sizeof(u16);
 			addr++)	{
-		if (!ath9k_hw_nvram_read(ah, addr + eep_start_loc, eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Unable to read eeprom region \n");
+		if (!ath9k_hw_nvram_read(common,
+					 addr + eep_start_loc, eep_data)) {
+			ath_print(common, ATH_DBG_EEPROM,
+				  "Unable to read eeprom region \n");
 			return false;
 		}
 		eep_data++;
@@ -57,17 +59,18 @@
 	int i, addr;
 	bool need_swap = false;
 	struct ar9287_eeprom *eep = &ah->eeprom.map9287;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!ath9k_hw_use_flash(ah)) {
-		if (!ath9k_hw_nvram_read
-		    (ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Reading Magic # failed\n");
+		if (!ath9k_hw_nvram_read(common,
+					 AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+			ath_print(common, ATH_DBG_FATAL,
+				  "Reading Magic # failed\n");
 			return false;
 		}
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
 
@@ -83,15 +86,15 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n", need_swap ?
-		"True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n", need_swap ?
+		  "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.map9287.baseEepHeader.length);
@@ -148,9 +151,9 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR9287_EEP_VER
 	    || ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
-			 sum, ah->eep_ops->get_eeprom_ver(ah));
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+			   sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
 
@@ -436,6 +439,7 @@
 						struct ath9k_channel *chan,
 						int16_t *pTxPowerIndexOffset)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct cal_data_per_freq_ar9287 *pRawDataset;
 	struct cal_data_op_loop_ar9287 *pRawDatasetOpenLoop;
 	u8  *pCalBChans = NULL;
@@ -564,24 +568,25 @@
 						  & 0xFF) << 24) ;
 					REG_WRITE(ah, regOffset, reg32);
 
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"PDADC (%d,%4x): %4.4x %8.8x\n",
-						i, regChainOffset, regOffset,
-						reg32);
+					ath_print(common, ATH_DBG_EEPROM,
+						  "PDADC (%d,%4x): %4.4x "
+						  "%8.8x\n",
+						  i, regChainOffset, regOffset,
+						  reg32);
 
-					DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-						"PDADC: Chain %d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d | "
-						"PDADC %3d Value %3d |\n",
-						i, 4 * j, pdadcValues[4 * j],
-						4 * j + 1,
-						pdadcValues[4 * j + 1],
-						4 * j + 2,
-						pdadcValues[4 * j + 2],
-						4 * j + 3,
-						pdadcValues[4 * j + 3]);
+					ath_print(common, ATH_DBG_EEPROM,
+						  "PDADC: Chain %d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d | "
+						  "PDADC %3d Value %3d |\n",
+						  i, 4 * j, pdadcValues[4 * j],
+						  4 * j + 1,
+						  pdadcValues[4 * j + 1],
+						  4 * j + 2,
+						  pdadcValues[4 * j + 2],
+						  4 * j + 3,
+						  pdadcValues[4 * j + 3]);
 
 					regOffset += 4;
 				}
@@ -831,6 +836,7 @@
 {
 #define INCREASE_MAXPOW_BY_TWO_CHAIN     6
 #define INCREASE_MAXPOW_BY_THREE_CHAIN   10
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	struct ar9287_eeprom *pEepData = &ah->eeprom.map9287;
 	struct modal_eep_ar9287_header *pModal = &pEepData->modalHeader;
@@ -966,8 +972,8 @@
 			INCREASE_MAXPOW_BY_THREE_CHAIN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Invalid chainmask configuration\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Invalid chainmask configuration\n");
 		break;
 	}
 }
@@ -1138,19 +1144,20 @@
 {
 #define EEP_MAP9287_SPURCHAN \
 	(ah->eeprom.map9287.modalHeader.spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		       "Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_MAP9287_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c
index 4071fc9..404a034 100644
--- a/drivers/net/wireless/ath/ath9k/eeprom_def.c
+++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static void ath9k_get_txgain_index(struct ath_hw *ah,
 		struct ath9k_channel *chan,
@@ -89,14 +89,15 @@
 static bool ath9k_hw_def_fill_eeprom(struct ath_hw *ah)
 {
 #define SIZE_EEPROM_DEF (sizeof(struct ar5416_eeprom_def) / sizeof(u16))
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eep_data = (u16 *)&ah->eeprom.def;
 	int addr, ar5416_eep_start_loc = 0x100;
 
 	for (addr = 0; addr < SIZE_EEPROM_DEF; addr++) {
-		if (!ath9k_hw_nvram_read(ah, addr + ar5416_eep_start_loc,
+		if (!ath9k_hw_nvram_read(common, addr + ar5416_eep_start_loc,
 					 eep_data)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Unable to read eeprom region\n");
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Unable to read eeprom region\n");
 			return false;
 		}
 		eep_data++;
@@ -109,19 +110,20 @@
 {
 	struct ar5416_eeprom_def *eep =
 		(struct ar5416_eeprom_def *) &ah->eeprom.def;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u16 *eepdata, temp, magic, magic2;
 	u32 sum = 0, el;
 	bool need_swap = false;
 	int i, addr, size;
 
-	if (!ath9k_hw_nvram_read(ah, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Reading Magic # failed\n");
+	if (!ath9k_hw_nvram_read(common, AR5416_EEPROM_MAGIC_OFFSET, &magic)) {
+		ath_print(common, ATH_DBG_FATAL, "Reading Magic # failed\n");
 		return false;
 	}
 
 	if (!ath9k_hw_use_flash(ah)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Read Magic = 0x%04X\n", magic);
+		ath_print(common, ATH_DBG_EEPROM,
+			  "Read Magic = 0x%04X\n", magic);
 
 		if (magic != AR5416_EEPROM_MAGIC) {
 			magic2 = swab16(magic);
@@ -137,16 +139,16 @@
 					eepdata++;
 				}
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"Invalid EEPROM Magic. "
-					"Endianness mismatch.\n");
+				ath_print(common, ATH_DBG_FATAL,
+					  "Invalid EEPROM Magic. "
+					  "Endianness mismatch.\n");
 				return -EINVAL;
 			}
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_EEPROM, "need_swap = %s.\n",
-		need_swap ? "True" : "False");
+	ath_print(common, ATH_DBG_EEPROM, "need_swap = %s.\n",
+		  need_swap ? "True" : "False");
 
 	if (need_swap)
 		el = swab16(ah->eeprom.def.baseEepHeader.length);
@@ -167,8 +169,8 @@
 		u32 integer, j;
 		u16 word;
 
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"EEPROM Endianness is not native.. Changing.\n");
+		ath_print(common, ATH_DBG_EEPROM,
+			  "EEPROM Endianness is not native.. Changing.\n");
 
 		word = swab16(eep->baseEepHeader.length);
 		eep->baseEepHeader.length = word;
@@ -214,8 +216,8 @@
 
 	if (sum != 0xffff || ah->eep_ops->get_eeprom_ver(ah) != AR5416_EEP_VER ||
 	    ah->eep_ops->get_eeprom_rev(ah) < AR5416_EEP_NO_BACK_VER) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Bad EEPROM checksum 0x%x or revision 0x%04x\n",
+		ath_print(common, ATH_DBG_FATAL,
+			  "Bad EEPROM checksum 0x%x or revision 0x%04x\n",
 			sum, ah->eep_ops->get_eeprom_ver(ah));
 		return -EINVAL;
 	}
@@ -289,6 +291,11 @@
 			return pBase->frac_n_5g;
 		else
 			return 0;
+	case EEP_PWR_TABLE_OFFSET:
+		if (AR5416_VER_MASK >= AR5416_EEP_MINOR_VER_21)
+			return pBase->pwr_table_offset;
+		else
+			return AR5416_PWR_TABLE_OFFSET_DB;
 	default:
 		return 0;
 	}
@@ -739,6 +746,76 @@
 	return;
 }
 
+static int16_t ath9k_change_gain_boundary_setting(struct ath_hw *ah,
+				u16 *gb,
+				u16 numXpdGain,
+				u16 pdGainOverlap_t2,
+				int8_t pwr_table_offset,
+				int16_t *diff)
+
+{
+	u16 k;
+
+	/* Prior to writing the boundaries or the pdadc vs. power table
+	 * into the chip registers the default starting point on the pdadc
+	 * vs. power table needs to be checked and the curve boundaries
+	 * adjusted accordingly
+	 */
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		u16 gb_limit;
+
+		if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
+			/* get the difference in dB */
+			*diff = (u16)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB);
+			/* get the number of half dB steps */
+			*diff *= 2;
+			/* change the original gain boundary settings
+			 * by the number of half dB steps
+			 */
+			for (k = 0; k < numXpdGain; k++)
+				gb[k] = (u16)(gb[k] - *diff);
+		}
+		/* Because of a hardware limitation, ensure the gain boundary
+		 * is not larger than (63 - overlap)
+		 */
+		gb_limit = (u16)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2);
+
+		for (k = 0; k < numXpdGain; k++)
+			gb[k] = (u16)min(gb_limit, gb[k]);
+	}
+
+	return *diff;
+}
+
+static void ath9k_adjust_pdadc_values(struct ath_hw *ah,
+				      int8_t pwr_table_offset,
+				      int16_t diff,
+				      u8 *pdadcValues)
+{
+#define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff)
+	u16 k;
+
+	/* If this is a board that has a pwrTableOffset that differs from
+	 * the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
+	 * pdadc vs pwr table needs to be adjusted prior to writing to the
+	 * chip.
+	 */
+	if (AR_SREV_9280_20_OR_LATER(ah)) {
+		if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
+			/* shift the table to start at the new offset */
+			for (k = 0; k < (u16)NUM_PDADC(diff); k++ ) {
+				pdadcValues[k] = pdadcValues[k + diff];
+			}
+
+			/* fill the back of the table */
+			for (k = (u16)NUM_PDADC(diff); k < NUM_PDADC(0); k++) {
+				pdadcValues[k] = pdadcValues[NUM_PDADC(diff)];
+			}
+		}
+	}
+#undef NUM_PDADC
+}
+
 static void ath9k_hw_set_def_power_cal_table(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
 				  int16_t *pTxPowerIndexOffset)
@@ -746,7 +823,7 @@
 #define SM_PD_GAIN(x) SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##x)
 #define SM_PDGAIN_B(x, y) \
 		SM((gainBoundaries[x]), AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_##y)
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ar5416_eeprom_def *pEepData = &ah->eeprom.def;
 	struct cal_data_per_freq *pRawDataset;
 	u8 *pCalBChans = NULL;
@@ -754,15 +831,18 @@
 	static u8 pdadcValues[AR5416_NUM_PDADC_VALUES];
 	u16 gainBoundaries[AR5416_PD_GAINS_IN_MASK];
 	u16 numPiers, i, j;
-	int16_t tMinCalPower;
+	int16_t tMinCalPower, diff = 0;
 	u16 numXpdGain, xpdMask;
 	u16 xpdGainValues[AR5416_NUM_PD_GAINS] = { 0, 0, 0, 0 };
 	u32 reg32, regOffset, regChainOffset;
 	int16_t modalIdx;
+	int8_t pwr_table_offset;
 
 	modalIdx = IS_CHAN_2GHZ(chan) ? 1 : 0;
 	xpdMask = pEepData->modalHeader[modalIdx].xpdGain;
 
+	pwr_table_offset = ah->eep_ops->get_eeprom(ah, EEP_PWR_TABLE_OFFSET);
+
 	if ((pEepData->baseEepHeader.version & AR5416_EEP_VER_MINOR_MASK) >=
 	    AR5416_EEP_MINOR_VER_2) {
 		pdGainOverlap_t2 =
@@ -842,6 +922,13 @@
 							numXpdGain);
 			}
 
+			diff = ath9k_change_gain_boundary_setting(ah,
+							   gainBoundaries,
+							   numXpdGain,
+							   pdGainOverlap_t2,
+							   pwr_table_offset,
+							   &diff);
+
 			if ((i == 0) || AR_SREV_5416_20_OR_LATER(ah)) {
 				if (OLC_FOR_AR9280_20_LATER) {
 					REG_WRITE(ah,
@@ -862,6 +949,10 @@
 				}
 			}
 
+
+			ath9k_adjust_pdadc_values(ah, pwr_table_offset,
+						  diff, pdadcValues);
+
 			regOffset = AR_PHY_BASE + (672 << 2) + regChainOffset;
 			for (j = 0; j < 32; j++) {
 				reg32 = ((pdadcValues[4 * j + 0] & 0xFF) << 0) |
@@ -870,20 +961,20 @@
 					((pdadcValues[4 * j + 3] & 0xFF) << 24);
 				REG_WRITE(ah, regOffset, reg32);
 
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC (%d,%4x): %4.4x %8.8x\n",
-					i, regChainOffset, regOffset,
-					reg32);
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PDADC: Chain %d | PDADC %3d "
-					"Value %3d | PDADC %3d Value %3d | "
-					"PDADC %3d Value %3d | PDADC %3d "
-					"Value %3d |\n",
-					i, 4 * j, pdadcValues[4 * j],
-					4 * j + 1, pdadcValues[4 * j + 1],
-					4 * j + 2, pdadcValues[4 * j + 2],
-					4 * j + 3,
-					pdadcValues[4 * j + 3]);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC (%d,%4x): %4.4x %8.8x\n",
+					  i, regChainOffset, regOffset,
+					  reg32);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PDADC: Chain %d | PDADC %3d "
+					  "Value %3d | PDADC %3d Value %3d | "
+					  "PDADC %3d Value %3d | PDADC %3d "
+					  "Value %3d |\n",
+					  i, 4 * j, pdadcValues[4 * j],
+					  4 * j + 1, pdadcValues[4 * j + 1],
+					  4 * j + 2, pdadcValues[4 * j + 2],
+					  4 * j + 3,
+					  pdadcValues[4 * j + 3]);
 
 				regOffset += 4;
 			}
@@ -1197,8 +1288,13 @@
 	}
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
-		for (i = 0; i < Ar5416RateSize; i++)
-			ratesArray[i] -= AR5416_PWR_TABLE_OFFSET * 2;
+		for (i = 0; i < Ar5416RateSize; i++) {
+			int8_t pwr_table_offset;
+
+			pwr_table_offset = ah->eep_ops->get_eeprom(ah,
+							EEP_PWR_TABLE_OFFSET);
+			ratesArray[i] -= pwr_table_offset * 2;
+		}
 	}
 
 	REG_WRITE(ah, AR_PHY_POWER_TX_RATE1,
@@ -1297,7 +1393,7 @@
 
 	if (AR_SREV_9280_10_OR_LATER(ah))
 		regulatory->max_power_level =
-			ratesArray[i] + AR5416_PWR_TABLE_OFFSET * 2;
+			ratesArray[i] + AR5416_PWR_TABLE_OFFSET_DB * 2;
 	else
 		regulatory->max_power_level = ratesArray[i];
 
@@ -1311,8 +1407,8 @@
 		regulatory->max_power_level += INCREASE_MAXPOW_BY_THREE_CHAIN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-			"Invalid chainmask configuration\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_EEPROM,
+			  "Invalid chainmask configuration\n");
 		break;
 	}
 }
@@ -1349,20 +1445,21 @@
 {
 #define EEP_DEF_SPURCHAN \
 	(ah->eeprom.def.modalHeader[is2GHz].spurChans[i].spurChan)
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	u16 spur_val = AR_NO_SPUR;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-		"Getting spur idx %d is2Ghz. %d val %x\n",
-		i, is2GHz, ah->config.spurchans[i][is2GHz]);
+	ath_print(common, ATH_DBG_ANI,
+		  "Getting spur idx %d is2Ghz. %d val %x\n",
+		  i, is2GHz, ah->config.spurchans[i][is2GHz]);
 
 	switch (ah->config.spurmode) {
 	case SPUR_DISABLE:
 		break;
 	case SPUR_ENABLE_IOCTL:
 		spur_val = ah->config.spurchans[i][is2GHz];
-		DPRINTF(ah->ah_sc, ATH_DBG_ANI,
-			"Getting spur val from new loc. %d\n", spur_val);
+		ath_print(common, ATH_DBG_ANI,
+			  "Getting spur val from new loc. %d\n", spur_val);
 		break;
 	case SPUR_ENABLE_EEPROM:
 		spur_val = EEP_DEF_SPURCHAN;
diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c
index ca7694c..cab17c6 100644
--- a/drivers/net/wireless/ath/ath9k/hw.c
+++ b/drivers/net/wireless/ath/ath9k/hw.c
@@ -16,9 +16,9 @@
 
 #include <linux/io.h>
 #include <asm/unaligned.h>
-#include <linux/pci.h>
 
-#include "ath9k.h"
+#include "hw.h"
+#include "rc.h"
 #include "initvals.h"
 
 #define ATH9K_CLOCK_RATE_CCK		22
@@ -26,21 +26,37 @@
 #define ATH9K_CLOCK_RATE_2GHZ_OFDM	44
 
 static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type);
-static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-			      enum ath9k_ht_macmode macmode);
+static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan);
 static u32 ath9k_hw_ini_fixup(struct ath_hw *ah,
 			      struct ar5416_eeprom_def *pEepData,
 			      u32 reg, u32 value);
 static void ath9k_hw_9280_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
 static void ath9k_hw_spur_mitigate(struct ath_hw *ah, struct ath9k_channel *chan);
 
+MODULE_AUTHOR("Atheros Communications");
+MODULE_DESCRIPTION("Support for Atheros 802.11n wireless LAN cards.");
+MODULE_SUPPORTED_DEVICE("Atheros 802.11n WLAN cards");
+MODULE_LICENSE("Dual BSD/GPL");
+
+static int __init ath9k_init(void)
+{
+	return 0;
+}
+module_init(ath9k_init);
+
+static void __exit ath9k_exit(void)
+{
+	return;
+}
+module_exit(ath9k_exit);
+
 /********************/
 /* Helper Functions */
 /********************/
 
 static u32 ath9k_hw_mac_usec(struct ath_hw *ah, u32 clks)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (!ah->curchan) /* should really check for CCK instead */
 		return clks / ATH9K_CLOCK_RATE_CCK;
@@ -52,7 +68,7 @@
 
 static u32 ath9k_hw_mac_to_usec(struct ath_hw *ah, u32 clks)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (conf_is_ht40(conf))
 		return ath9k_hw_mac_usec(ah, clks) / 2;
@@ -62,7 +78,7 @@
 
 static u32 ath9k_hw_mac_clks(struct ath_hw *ah, u32 usecs)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (!ah->curchan) /* should really check for CCK instead */
 		return usecs *ATH9K_CLOCK_RATE_CCK;
@@ -73,7 +89,7 @@
 
 static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs)
 {
-	struct ieee80211_conf *conf = &ah->ah_sc->hw->conf;
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 
 	if (conf_is_ht40(conf))
 		return ath9k_hw_mac_clks(ah, usecs) * 2;
@@ -81,38 +97,6 @@
 		return ath9k_hw_mac_clks(ah, usecs);
 }
 
-/*
- * Read and write, they both share the same lock. We do this to serialize
- * reads and writes on Atheros 802.11n PCI devices only. This is required
- * as the FIFO on these devices can only accept sanely 2 requests. After
- * that the device goes bananas. Serializing the reads/writes prevents this
- * from happening.
- */
-
-void ath9k_iowrite32(struct ath_hw *ah, u32 reg_offset, u32 val)
-{
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		iowrite32(val, ah->ah_sc->mem + reg_offset);
-}
-
-unsigned int ath9k_ioread32(struct ath_hw *ah, u32 reg_offset)
-{
-	u32 val;
-	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
-		unsigned long flags;
-		spin_lock_irqsave(&ah->ah_sc->sc_serial_rw, flags);
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-		spin_unlock_irqrestore(&ah->ah_sc->sc_serial_rw, flags);
-	} else
-		val = ioread32(ah->ah_sc->mem + reg_offset);
-	return val;
-}
-
 bool ath9k_hw_wait(struct ath_hw *ah, u32 reg, u32 mask, u32 val, u32 timeout)
 {
 	int i;
@@ -126,12 +110,13 @@
 		udelay(AH_TIME_QUANTUM);
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-		"timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
-		timeout, reg, REG_READ(ah, reg), mask, val);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_ANY,
+		  "timeout (%d us) on reg 0x%x: 0x%08x & 0x%08x != 0x%08x\n",
+		  timeout, reg, REG_READ(ah, reg), mask, val);
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_wait);
 
 u32 ath9k_hw_reverse_bits(u32 val, u32 n)
 {
@@ -210,15 +195,16 @@
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Unknown phy %u (rate ix %u)\n",
-			rates->info[rateix].phy, rateix);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Unknown phy %u (rate ix %u)\n",
+			  rates->info[rateix].phy, rateix);
 		txTime = 0;
 		break;
 	}
 
 	return txTime;
 }
+EXPORT_SYMBOL(ath9k_hw_computetxtime);
 
 void ath9k_hw_get_channel_centers(struct ath_hw *ah,
 				  struct ath9k_channel *chan,
@@ -245,10 +231,9 @@
 
 	centers->ctl_center =
 		centers->synth_center - (extoff * HT40_CHANNEL_CENTER_SHIFT);
+	/* 25 MHz spacing is supported by hw but not on upper layers */
 	centers->ext_center =
-		centers->synth_center + (extoff *
-			 ((ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_20) ?
-			  HT40_CHANNEL_CENTER_SHIFT : 15));
+		centers->synth_center + (extoff * HT40_CHANNEL_CENTER_SHIFT);
 }
 
 /******************/
@@ -317,6 +302,7 @@
 
 static bool ath9k_hw_chip_test(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 regAddr[2] = { AR_STA_ID0, AR_PHY_BASE + (8 << 2) };
 	u32 regHold[2];
 	u32 patternData[4] = { 0x55555555,
@@ -335,10 +321,11 @@
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (rdData != wrData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"address test failed "
-					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
-					addr, wrData, rdData);
+				ath_print(common, ATH_DBG_FATAL,
+					  "address test failed "
+					  "addr: 0x%08x - wr:0x%08x != "
+					  "rd:0x%08x\n",
+					  addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -347,10 +334,11 @@
 			REG_WRITE(ah, addr, wrData);
 			rdData = REG_READ(ah, addr);
 			if (wrData != rdData) {
-				DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-					"address test failed "
-					"addr: 0x%08x - wr:0x%08x != rd:0x%08x\n",
-					addr, wrData, rdData);
+				ath_print(common, ATH_DBG_FATAL,
+					  "address test failed "
+					  "addr: 0x%08x - wr:0x%08x != "
+					  "rd:0x%08x\n",
+					  addr, wrData, rdData);
 				return false;
 			}
 		}
@@ -433,6 +421,7 @@
 	if (num_possible_cpus() > 1)
 		ah->config.serialize_regmode = SER_REG_MODE_AUTO;
 }
+EXPORT_SYMBOL(ath9k_hw_init);
 
 static void ath9k_hw_init_defaults(struct ath_hw *ah)
 {
@@ -472,8 +461,8 @@
 
 	rfStatus = ath9k_hw_init_rf(ah, &ecode);
 	if (!rfStatus) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"RF setup failed, status: %u\n", ecode);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "RF setup failed, status: %u\n", ecode);
 		return ecode;
 	}
 
@@ -497,9 +486,9 @@
 	case AR_RAD2122_SREV_MAJOR:
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Radio Chip Rev 0x%02X not supported\n",
-			val & AR_RADIO_SREV_MAJOR);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Radio Chip Rev 0x%02X not supported\n",
+			  val & AR_RADIO_SREV_MAJOR);
 		return -EOPNOTSUPP;
 	}
 
@@ -510,6 +499,7 @@
 
 static int ath9k_hw_init_macaddr(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 sum;
 	int i;
 	u16 eeval;
@@ -518,8 +508,8 @@
 	for (i = 0; i < 3; i++) {
 		eeval = ah->eep_ops->get_eeprom(ah, AR_EEPROM_MAC(i));
 		sum += eeval;
-		ah->macaddr[2 * i] = eeval >> 8;
-		ah->macaddr[2 * i + 1] = eeval & 0xff;
+		common->macaddr[2 * i] = eeval >> 8;
+		common->macaddr[2 * i + 1] = eeval & 0xff;
 	}
 	if (sum == 0 || sum == 0xffff * 3)
 		return -EADDRNOTAVAIL;
@@ -590,8 +580,10 @@
 	if (ecode != 0)
 		return ecode;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_CONFIG, "Eeprom VER: %d, REV: %d\n",
-		ah->eep_ops->get_eeprom_ver(ah), ah->eep_ops->get_eeprom_rev(ah));
+	ath_print(ath9k_hw_common(ah), ATH_DBG_CONFIG,
+		  "Eeprom VER: %d, REV: %d\n",
+		  ah->eep_ops->get_eeprom_ver(ah),
+		  ah->eep_ops->get_eeprom_rev(ah));
 
 	ecode = ath9k_hw_rfattach(ah);
 	if (ecode != 0)
@@ -617,6 +609,7 @@
 	case AR9285_DEVID_PCIE:
 	case AR5416_DEVID_AR9287_PCI:
 	case AR5416_DEVID_AR9287_PCIE:
+	case AR9271_USB:
 		return true;
 	default:
 		break;
@@ -634,9 +627,8 @@
 	case AR_SREV_VERSION_9280:
 	case AR_SREV_VERSION_9285:
 	case AR_SREV_VERSION_9287:
-		return true;
-	/* Not yet */
 	case AR_SREV_VERSION_9271:
+		return true;
 	default:
 		break;
 	}
@@ -905,21 +897,27 @@
 
 int ath9k_hw_init(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int r = 0;
 
-	if (!ath9k_hw_devid_supported(ah->hw_version.devid))
+	if (!ath9k_hw_devid_supported(ah->hw_version.devid)) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unsupported device ID: 0x%0x\n",
+			  ah->hw_version.devid);
 		return -EOPNOTSUPP;
+	}
 
 	ath9k_hw_init_defaults(ah);
 	ath9k_hw_init_config(ah);
 
 	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_POWER_ON)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't reset chip\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Couldn't reset chip\n");
 		return -EIO;
 	}
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
+		ath_print(common, ATH_DBG_FATAL, "Couldn't wakeup chip\n");
 		return -EIO;
 	}
 
@@ -934,14 +932,14 @@
 		}
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "serialize_regmode is %d\n",
+	ath_print(common, ATH_DBG_RESET, "serialize_regmode is %d\n",
 		ah->config.serialize_regmode);
 
 	if (!ath9k_hw_macversion_supported(ah->hw_version.macVersion)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Mac Chip Rev 0x%02x.%x is not supported by "
-			"this driver\n", ah->hw_version.macVersion,
-			ah->hw_version.macRev);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Mac Chip Rev 0x%02x.%x is not supported by "
+			  "this driver\n", ah->hw_version.macVersion,
+			  ah->hw_version.macRev);
 		return -EOPNOTSUPP;
 	}
 
@@ -969,6 +967,16 @@
 	else
 		ath9k_hw_disablepcie(ah);
 
+	/* Support for Japan ch.14 (2484) spread */
+	if (AR_SREV_9287_11_OR_LATER(ah)) {
+		INIT_INI_ARRAY(&ah->iniCckfirNormal,
+		       ar9287Common_normal_cck_fir_coeff_92871_1,
+		       ARRAY_SIZE(ar9287Common_normal_cck_fir_coeff_92871_1), 2);
+		INIT_INI_ARRAY(&ah->iniCckfirJapan2484,
+		       ar9287Common_japan_2484_cck_fir_coeff_92871_1,
+		       ARRAY_SIZE(ar9287Common_japan_2484_cck_fir_coeff_92871_1), 2);
+	}
+
 	r = ath9k_hw_post_init(ah);
 	if (r)
 		return r;
@@ -979,8 +987,8 @@
 
 	r = ath9k_hw_init_macaddr(ah);
 	if (r) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Failed to initialize MAC address\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to initialize MAC address\n");
 		return r;
 	}
 
@@ -991,6 +999,8 @@
 
 	ath9k_init_nfcal_hist_buffer(ah);
 
+	common->state = ATH_HW_INITIALIZED;
+
 	return 0;
 }
 
@@ -1164,7 +1174,8 @@
 static bool ath9k_hw_set_ack_timeout(struct ath_hw *ah, u32 us)
 {
 	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_ACK))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad ack timeout %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad ack timeout %u\n", us);
 		ah->acktimeout = (u32) -1;
 		return false;
 	} else {
@@ -1178,7 +1189,8 @@
 static bool ath9k_hw_set_cts_timeout(struct ath_hw *ah, u32 us)
 {
 	if (us > ath9k_hw_mac_to_usec(ah, MS(0xffffffff, AR_TIME_OUT_CTS))) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad cts timeout %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad cts timeout %u\n", us);
 		ah->ctstimeout = (u32) -1;
 		return false;
 	} else {
@@ -1192,8 +1204,8 @@
 static bool ath9k_hw_set_global_txtimeout(struct ath_hw *ah, u32 tu)
 {
 	if (tu > 0xFFFF) {
-		DPRINTF(ah->ah_sc, ATH_DBG_XMIT,
-			"bad global tx timeout %u\n", tu);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_XMIT,
+			  "bad global tx timeout %u\n", tu);
 		ah->globaltxtimeout = (u32) -1;
 		return false;
 	} else {
@@ -1205,8 +1217,8 @@
 
 static void ath9k_hw_init_user_settings(struct ath_hw *ah)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
-		ah->misc_mode);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_RESET, "ah->misc_mode 0x%x\n",
+		  ah->misc_mode);
 
 	if (ah->misc_mode != 0)
 		REG_WRITE(ah, AR_PCU_MISC,
@@ -1229,14 +1241,22 @@
 
 void ath9k_hw_detach(struct ath_hw *ah)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	if (common->state <= ATH_HW_INITIALIZED)
+		goto free_hw;
+
 	if (!AR_SREV_9100(ah))
 		ath9k_hw_ani_disable(ah);
 
-	ath9k_hw_rf_free(ah);
 	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+
+free_hw:
+	ath9k_hw_rf_free(ah);
 	kfree(ah);
 	ah = NULL;
 }
+EXPORT_SYMBOL(ath9k_hw_detach);
 
 /*******/
 /* INI */
@@ -1298,28 +1318,29 @@
 			      u32 reg, u32 value)
 {
 	struct base_eep_header *pBase = &(pEepData->baseEepHeader);
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	switch (ah->hw_version.devid) {
 	case AR9280_DEVID_PCI:
 		if (reg == 0x7894) {
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
+			ath_print(common, ATH_DBG_EEPROM,
 				"ini VAL: %x  EEPROM: %x\n", value,
 				(pBase->version & 0xff));
 
 			if ((pBase->version & 0xff) > 0x0a) {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PWDCLKIND: %d\n",
-					pBase->pwdclkind);
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PWDCLKIND: %d\n",
+					  pBase->pwdclkind);
 				value &= ~AR_AN_TOP2_PWDCLKIND;
 				value |= AR_AN_TOP2_PWDCLKIND &
 					(pBase->pwdclkind << AR_AN_TOP2_PWDCLKIND_S);
 			} else {
-				DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-					"PWDCLKIND Earlier Rev\n");
+				ath_print(common, ATH_DBG_EEPROM,
+					  "PWDCLKIND Earlier Rev\n");
 			}
 
-			DPRINTF(ah->ah_sc, ATH_DBG_EEPROM,
-				"final ini VAL: %x\n", value);
+			ath_print(common, ATH_DBG_EEPROM,
+				  "final ini VAL: %x\n", value);
 		}
 		break;
 	}
@@ -1374,8 +1395,7 @@
 }
 
 static int ath9k_hw_process_ini(struct ath_hw *ah,
-				struct ath9k_channel *chan,
-				enum ath9k_ht_macmode macmode)
+				struct ath9k_channel *chan)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
 	int i, regWrites = 0;
@@ -1477,7 +1497,7 @@
 	}
 
 	ath9k_hw_override_ini(ah, chan);
-	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_set_regs(ah, chan);
 	ath9k_hw_init_chain_masks(ah);
 
 	if (OLC_FOR_AR9280_20_LATER)
@@ -1491,8 +1511,8 @@
 				 (u32) regulatory->power_limit));
 
 	if (!ath9k_hw_set_rf_regs(ah, chan, freqIndex)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"ar5416SetRfRegs failed\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "ar5416SetRfRegs failed\n");
 		return -EIO;
 	}
 
@@ -1697,16 +1717,14 @@
 
 	REG_WRITE(ah, AR_RTC_RC, 0);
 	if (!ath9k_hw_wait(ah, AR_RTC_RC, AR_RTC_RC_M, 0, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"RTC stuck in MAC reset\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "RTC stuck in MAC reset\n");
 		return false;
 	}
 
 	if (!AR_SREV_9100(ah))
 		REG_WRITE(ah, AR_RC, 0);
 
-	ath9k_hw_init_pll(ah, NULL);
-
 	if (AR_SREV_9100(ah))
 		udelay(50);
 
@@ -1734,7 +1752,8 @@
 			   AR_RTC_STATUS_M,
 			   AR_RTC_STATUS_ON,
 			   AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "RTC not waking up\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "RTC not waking up\n");
 		return false;
 	}
 
@@ -1759,8 +1778,7 @@
 	}
 }
 
-static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan,
-			      enum ath9k_ht_macmode macmode)
+static void ath9k_hw_set_regs(struct ath_hw *ah, struct ath9k_channel *chan)
 {
 	u32 phymode;
 	u32 enableDacFifo = 0;
@@ -1779,12 +1797,10 @@
 		    (chan->chanmode == CHANNEL_G_HT40PLUS))
 			phymode |= AR_PHY_FC_DYN2040_PRI_CH;
 
-		if (ah->extprotspacing == ATH9K_HT_EXTPROTSPACING_25)
-			phymode |= AR_PHY_FC_DYN2040_EXT_CH;
 	}
 	REG_WRITE(ah, AR_PHY_TURBO, phymode);
 
-	ath9k_hw_set11nmac2040(ah, macmode);
+	ath9k_hw_set11nmac2040(ah);
 
 	REG_WRITE(ah, AR_GTXTO, 25 << AR_GTXTO_TIMEOUT_LIMIT_S);
 	REG_WRITE(ah, AR_CST, 0xF << AR_CST_TIMEOUT_LIMIT_S);
@@ -1810,17 +1826,18 @@
 }
 
 static bool ath9k_hw_channel_change(struct ath_hw *ah,
-				    struct ath9k_channel *chan,
-				    enum ath9k_ht_macmode macmode)
+				    struct ath9k_channel *chan)
 {
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *channel = chan->chan;
 	u32 synthDelay, qnum;
 
 	for (qnum = 0; qnum < AR_NUM_QCU; qnum++) {
 		if (ath9k_hw_numtxpending(ah, qnum)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"Transmit frames pending on queue %d\n", qnum);
+			ath_print(common, ATH_DBG_QUEUE,
+				  "Transmit frames pending on "
+				  "queue %d\n", qnum);
 			return false;
 		}
 	}
@@ -1828,19 +1845,19 @@
 	REG_WRITE(ah, AR_PHY_RFBUS_REQ, AR_PHY_RFBUS_REQ_EN);
 	if (!ath9k_hw_wait(ah, AR_PHY_RFBUS_GRANT, AR_PHY_RFBUS_GRANT_EN,
 			   AR_PHY_RFBUS_GRANT_EN, AH_WAIT_TIMEOUT)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Could not kill baseband RX\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Could not kill baseband RX\n");
 		return false;
 	}
 
-	ath9k_hw_set_regs(ah, chan, macmode);
+	ath9k_hw_set_regs(ah, chan);
 
 	if (AR_SREV_9280_10_OR_LATER(ah)) {
 		ath9k_hw_ar9280_set_channel(ah, chan);
 	} else {
 		if (!(ath9k_hw_set_channel(ah, chan))) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Failed to set channel\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Failed to set channel\n");
 			return false;
 		}
 	}
@@ -2342,17 +2359,16 @@
 int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan,
 		    bool bChannelChange)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 saveLedState;
-	struct ath_softc *sc = ah->ah_sc;
 	struct ath9k_channel *curchan = ah->curchan;
 	u32 saveDefAntenna;
 	u32 macStaId1;
 	u64 tsf = 0;
 	int i, rx_chainmask, r;
 
-	ah->extprotspacing = sc->ht_extprotspacing;
-	ah->txchainmask = sc->tx_chainmask;
-	ah->rxchainmask = sc->rx_chainmask;
+	ah->txchainmask = common->tx_chainmask;
+	ah->rxchainmask = common->rx_chainmask;
 
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return -EIO;
@@ -2369,7 +2385,7 @@
 	     !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) ||
 	     IS_CHAN_A_5MHZ_SPACED(ah->curchan))) {
 
-		if (ath9k_hw_channel_change(ah, chan, sc->tx_chan_width)) {
+		if (ath9k_hw_channel_change(ah, chan)) {
 			ath9k_hw_loadnf(ah, ah->curchan);
 			ath9k_hw_start_nfcal(ah);
 			return 0;
@@ -2400,7 +2416,7 @@
 	}
 
 	if (!ath9k_hw_chip_reset(ah, chan)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Chip reset failed\n");
+		ath_print(common, ATH_DBG_FATAL, "Chip reset failed\n");
 		return -EINVAL;
 	}
 
@@ -2429,7 +2445,7 @@
 		REG_SET_BIT(ah, AR_MAC_PCU_ASYNC_FIFO_REG3,
 				AR_MAC_PCU_ASYNC_FIFO_REG3_SOFT_RESET);
 	}
-	r = ath9k_hw_process_ini(ah, chan, sc->tx_chan_width);
+	r = ath9k_hw_process_ini(ah, chan);
 	if (r)
 		return r;
 
@@ -2462,8 +2478,8 @@
 
 	ath9k_hw_decrease_chain_power(ah, chan);
 
-	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(ah->macaddr));
-	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(ah->macaddr + 4)
+	REG_WRITE(ah, AR_STA_ID0, get_unaligned_le32(common->macaddr));
+	REG_WRITE(ah, AR_STA_ID1, get_unaligned_le16(common->macaddr + 4)
 		  | macStaId1
 		  | AR_STA_ID1_RTS_USE_DEF
 		  | (ah->config.
@@ -2471,14 +2487,11 @@
 		  | ah->sta_id1_defaults);
 	ath9k_hw_set_operating_mode(ah, ah->opmode);
 
-	REG_WRITE(ah, AR_BSSMSKL, get_unaligned_le32(sc->bssidmask));
-	REG_WRITE(ah, AR_BSSMSKU, get_unaligned_le16(sc->bssidmask + 4));
+	ath_hw_setbssidmask(common);
 
 	REG_WRITE(ah, AR_DEF_ANTENNA, saveDefAntenna);
 
-	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(sc->curbssid));
-	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(sc->curbssid + 4) |
-		  ((sc->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
+	ath9k_hw_write_associd(ah);
 
 	REG_WRITE(ah, AR_ISR, ~0);
 
@@ -2558,13 +2571,13 @@
 		u32 mask;
 		mask = REG_READ(ah, AR_CFG);
 		if (mask & (AR_CFG_SWRB | AR_CFG_SWTB | AR_CFG_SWRG)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			ath_print(common, ATH_DBG_RESET,
 				"CFG Byte Swap Set 0x%x\n", mask);
 		} else {
 			mask =
 				INIT_CONFIG_STATUS | AR_CFG_SWRB | AR_CFG_SWTB;
 			REG_WRITE(ah, AR_CFG, mask);
-			DPRINTF(ah->ah_sc, ATH_DBG_RESET,
+			ath_print(common, ATH_DBG_RESET,
 				"Setting CFG 0x%x\n", REG_READ(ah, AR_CFG));
 		}
 	} else {
@@ -2577,11 +2590,12 @@
 #endif
 	}
 
-	if (ah->ah_sc->sc_flags & SC_OP_BTCOEX_ENABLED)
+	if (ah->btcoex_hw.enabled)
 		ath9k_hw_btcoex_enable(ah);
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_reset);
 
 /************************/
 /* Key Cache Management */
@@ -2592,8 +2606,8 @@
 	u32 keyType;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keychache entry %u out of range\n", entry);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2620,14 +2634,15 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_keyreset);
 
 bool ath9k_hw_keysetmac(struct ath_hw *ah, u16 entry, const u8 *mac)
 {
 	u32 macHi, macLo;
 
 	if (entry >= ah->caps.keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keychache entry %u out of range\n", entry);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "keychache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2648,18 +2663,20 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_keysetmac);
 
 bool ath9k_hw_set_keycache_entry(struct ath_hw *ah, u16 entry,
 				 const struct ath9k_keyval *k,
 				 const u8 *mac)
 {
 	const struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 key0, key1, key2, key3, key4;
 	u32 keyType;
 
 	if (entry >= pCap->keycache_size) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"keycache entry %u out of range\n", entry);
+		ath_print(common, ATH_DBG_FATAL,
+			  "keycache entry %u out of range\n", entry);
 		return false;
 	}
 
@@ -2669,9 +2686,9 @@
 		break;
 	case ATH9K_CIPHER_AES_CCM:
 		if (!(pCap->hw_caps & ATH9K_HW_CAP_CIPHER_AESCCM)) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"AES-CCM not supported by mac rev 0x%x\n",
-				ah->hw_version.macRev);
+			ath_print(common, ATH_DBG_ANY,
+				  "AES-CCM not supported by mac rev 0x%x\n",
+				  ah->hw_version.macRev);
 			return false;
 		}
 		keyType = AR_KEYTABLE_TYPE_CCM;
@@ -2680,15 +2697,15 @@
 		keyType = AR_KEYTABLE_TYPE_TKIP;
 		if (ATH9K_IS_MIC_ENABLED(ah)
 		    && entry + 64 >= pCap->keycache_size) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"entry %u inappropriate for TKIP\n", entry);
+			ath_print(common, ATH_DBG_ANY,
+				  "entry %u inappropriate for TKIP\n", entry);
 			return false;
 		}
 		break;
 	case ATH9K_CIPHER_WEP:
 		if (k->kv_len < WLAN_KEY_LEN_WEP40) {
-			DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-				"WEP key length %u too small\n", k->kv_len);
+			ath_print(common, ATH_DBG_ANY,
+				  "WEP key length %u too small\n", k->kv_len);
 			return false;
 		}
 		if (k->kv_len <= WLAN_KEY_LEN_WEP40)
@@ -2702,8 +2719,8 @@
 		keyType = AR_KEYTABLE_TYPE_CLR;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"cipher %u not supported\n", k->kv_type);
+		ath_print(common, ATH_DBG_FATAL,
+			  "cipher %u not supported\n", k->kv_type);
 		return false;
 	}
 
@@ -2845,6 +2862,7 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_set_keycache_entry);
 
 bool ath9k_hw_keyisvalid(struct ath_hw *ah, u16 entry)
 {
@@ -2855,6 +2873,7 @@
 	}
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_keyisvalid);
 
 /******************************/
 /* Power Management (Chipset) */
@@ -2869,8 +2888,9 @@
 		if (!AR_SREV_9100(ah))
 			REG_WRITE(ah, AR_RC, AR_RC_AHB | AR_RC_HOSTIF);
 
-		REG_CLR_BIT(ah, (AR_RTC_RESET),
-			    AR_RTC_RESET_EN);
+		if(!AR_SREV_5416(ah))
+			REG_CLR_BIT(ah, (AR_RTC_RESET),
+				    AR_RTC_RESET_EN);
 	}
 }
 
@@ -2902,6 +2922,7 @@
 					   ATH9K_RESET_POWER_ON) != true) {
 				return false;
 			}
+			ath9k_hw_init_pll(ah, NULL);
 		}
 		if (AR_SREV_9100(ah))
 			REG_SET_BIT(ah, AR_RTC_RESET,
@@ -2920,8 +2941,9 @@
 				    AR_RTC_FORCE_WAKE_EN);
 		}
 		if (i == 0) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Failed to wakeup in %uus\n", POWER_UP_TIME / 20);
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "Failed to wakeup in %uus\n",
+				  POWER_UP_TIME / 20);
 			return false;
 		}
 	}
@@ -2931,9 +2953,9 @@
 	return true;
 }
 
-static bool ath9k_hw_setpower_nolock(struct ath_hw *ah,
-				     enum ath9k_power_mode mode)
+bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	int status = true, setChip = true;
 	static const char *modes[] = {
 		"AWAKE",
@@ -2945,8 +2967,8 @@
 	if (ah->power_mode == mode)
 		return status;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_RESET, "%s -> %s\n",
-		modes[ah->power_mode], modes[mode]);
+	ath_print(common, ATH_DBG_RESET, "%s -> %s\n",
+		  modes[ah->power_mode], modes[mode]);
 
 	switch (mode) {
 	case ATH9K_PM_AWAKE:
@@ -2960,59 +2982,15 @@
 		ath9k_set_power_network_sleep(ah, setChip);
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Unknown power mode %u\n", mode);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unknown power mode %u\n", mode);
 		return false;
 	}
 	ah->power_mode = mode;
 
 	return status;
 }
-
-bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode)
-{
-	unsigned long flags;
-	bool ret;
-
-	spin_lock_irqsave(&ah->ah_sc->sc_pm_lock, flags);
-	ret = ath9k_hw_setpower_nolock(ah, mode);
-	spin_unlock_irqrestore(&ah->ah_sc->sc_pm_lock, flags);
-
-	return ret;
-}
-
-void ath9k_ps_wakeup(struct ath_softc *sc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sc->sc_pm_lock, flags);
-	if (++sc->ps_usecount != 1)
-		goto unlock;
-
-	ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_AWAKE);
-
- unlock:
-	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
-}
-
-void ath9k_ps_restore(struct ath_softc *sc)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&sc->sc_pm_lock, flags);
-	if (--sc->ps_usecount != 0)
-		goto unlock;
-
-	if (sc->ps_enabled &&
-	    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
-			      SC_OP_WAIT_FOR_CAB |
-			      SC_OP_WAIT_FOR_PSPOLL_DATA |
-			      SC_OP_WAIT_FOR_TX_ACK)))
-		ath9k_hw_setpower_nolock(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
-
- unlock:
-	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
-}
+EXPORT_SYMBOL(ath9k_hw_setpower);
 
 /*
  * Helper for ASPM support.
@@ -3145,6 +3123,7 @@
 		}
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_configpcipowersave);
 
 /**********************/
 /* Interrupt Handling */
@@ -3168,6 +3147,7 @@
 
 	return false;
 }
+EXPORT_SYMBOL(ath9k_hw_intrpend);
 
 bool ath9k_hw_getisr(struct ath_hw *ah, enum ath9k_int *masked)
 {
@@ -3176,6 +3156,7 @@
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	u32 sync_cause = 0;
 	bool fatal_int = false;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (!AR_SREV_9100(ah)) {
 		if (REG_READ(ah, AR_INTR_ASYNC_CAUSE) & AR_INTR_MAC_IRQ) {
@@ -3249,8 +3230,8 @@
 		}
 
 		if (isr & AR_ISR_RXORN) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"receive FIFO overrun interrupt\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "receive FIFO overrun interrupt\n");
 		}
 
 		if (!AR_SREV_9100(ah)) {
@@ -3292,25 +3273,25 @@
 
 		if (fatal_int) {
 			if (sync_cause & AR_INTR_SYNC_HOST1_FATAL) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-					"received PCI FATAL interrupt\n");
+				ath_print(common, ATH_DBG_ANY,
+					  "received PCI FATAL interrupt\n");
 			}
 			if (sync_cause & AR_INTR_SYNC_HOST1_PERR) {
-				DPRINTF(ah->ah_sc, ATH_DBG_ANY,
-					"received PCI PERR interrupt\n");
+				ath_print(common, ATH_DBG_ANY,
+					  "received PCI PERR interrupt\n");
 			}
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_RADM_CPL_TIMEOUT) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "AR_INTR_SYNC_RADM_CPL_TIMEOUT\n");
 			REG_WRITE(ah, AR_RC, AR_RC_HOSTIF);
 			REG_WRITE(ah, AR_RC, 0);
 			*masked |= ATH9K_INT_FATAL;
 		}
 		if (sync_cause & AR_INTR_SYNC_LOCAL_TIMEOUT) {
-			DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-				"AR_INTR_SYNC_LOCAL_TIMEOUT\n");
+			ath_print(common, ATH_DBG_INTERRUPT,
+				  "AR_INTR_SYNC_LOCAL_TIMEOUT\n");
 		}
 
 		REG_WRITE(ah, AR_INTR_SYNC_CAUSE_CLR, sync_cause);
@@ -3319,17 +3300,19 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_getisr);
 
 enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, enum ath9k_int ints)
 {
 	u32 omask = ah->mask_reg;
 	u32 mask, mask2;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
+	ath_print(common, ATH_DBG_INTERRUPT, "0x%x => 0x%x\n", omask, ints);
 
 	if (omask & ATH9K_INT_GLOBAL) {
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "disable IER\n");
+		ath_print(common, ATH_DBG_INTERRUPT, "disable IER\n");
 		REG_WRITE(ah, AR_IER, AR_IER_DISABLE);
 		(void) REG_READ(ah, AR_IER);
 		if (!AR_SREV_9100(ah)) {
@@ -3386,7 +3369,7 @@
 			mask2 |= AR_IMR_S2_CST;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
+	ath_print(common, ATH_DBG_INTERRUPT, "new IMR 0x%x\n", mask);
 	REG_WRITE(ah, AR_IMR, mask);
 	mask = REG_READ(ah, AR_IMR_S2) & ~(AR_IMR_S2_TIM |
 					   AR_IMR_S2_DTIM |
@@ -3406,7 +3389,7 @@
 	}
 
 	if (ints & ATH9K_INT_GLOBAL) {
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "enable IER\n");
+		ath_print(common, ATH_DBG_INTERRUPT, "enable IER\n");
 		REG_WRITE(ah, AR_IER, AR_IER_ENABLE);
 		if (!AR_SREV_9100(ah)) {
 			REG_WRITE(ah, AR_INTR_ASYNC_ENABLE,
@@ -3419,12 +3402,13 @@
 			REG_WRITE(ah, AR_INTR_SYNC_MASK,
 				  AR_INTR_SYNC_DEFAULT);
 		}
-		DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
-			 REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
+		ath_print(common, ATH_DBG_INTERRUPT, "AR_IMR 0x%x IER 0x%x\n",
+			  REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER));
 	}
 
 	return omask;
 }
+EXPORT_SYMBOL(ath9k_hw_set_interrupts);
 
 /*******************/
 /* Beacon Handling */
@@ -3467,9 +3451,9 @@
 			AR_TBTT_TIMER_EN | AR_DBA_TIMER_EN | AR_SWBA_TIMER_EN;
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_BEACON,
-			"%s: unsupported opmode: %d\n",
-			__func__, ah->opmode);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_BEACON,
+			  "%s: unsupported opmode: %d\n",
+			  __func__, ah->opmode);
 		return;
 		break;
 	}
@@ -3481,18 +3465,19 @@
 
 	beacon_period &= ~ATH9K_BEACON_ENA;
 	if (beacon_period & ATH9K_BEACON_RESET_TSF) {
-		beacon_period &= ~ATH9K_BEACON_RESET_TSF;
 		ath9k_hw_reset_tsf(ah);
 	}
 
 	REG_SET_BIT(ah, AR_TIMER_MODE, flags);
 }
+EXPORT_SYMBOL(ath9k_hw_beaconinit);
 
 void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 				    const struct ath9k_beacon_state *bs)
 {
 	u32 nextTbtt, beaconintval, dtimperiod, beacontimeout;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	REG_WRITE(ah, AR_NEXT_TBTT_TIMER, TU_TO_USEC(bs->bs_nexttbtt));
 
@@ -3518,10 +3503,10 @@
 	else
 		nextTbtt = bs->bs_nexttbtt;
 
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
-	DPRINTF(ah->ah_sc, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
+	ath_print(common, ATH_DBG_BEACON, "next DTIM %d\n", bs->bs_nextdtim);
+	ath_print(common, ATH_DBG_BEACON, "next beacon %d\n", nextTbtt);
+	ath_print(common, ATH_DBG_BEACON, "beacon period %d\n", beaconintval);
+	ath_print(common, ATH_DBG_BEACON, "DTIM period %d\n", dtimperiod);
 
 	REG_WRITE(ah, AR_NEXT_DTIM,
 		  TU_TO_USEC(bs->bs_nextdtim - SLEEP_SLOP));
@@ -3549,6 +3534,7 @@
 	/* TSF Out of Range Threshold */
 	REG_WRITE(ah, AR_TSFOOR_THRESHOLD, bs->bs_tsfoor_threshold);
 }
+EXPORT_SYMBOL(ath9k_hw_set_sta_beacon_timers);
 
 /*******************/
 /* HW Capabilities */
@@ -3558,7 +3544,8 @@
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah);
-	struct ath_btcoex_info *btcoex_info = &ah->ah_sc->btcoex_info;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
 
 	u16 capField = 0, eeval;
 
@@ -3579,8 +3566,8 @@
 			regulatory->current_rd += 5;
 		else if (regulatory->current_rd == 0x41)
 			regulatory->current_rd = 0x43;
-		DPRINTF(ah->ah_sc, ATH_DBG_REGULATORY,
-			"regdomain mapped to 0x%x\n", regulatory->current_rd);
+		ath_print(common, ATH_DBG_REGULATORY,
+			  "regdomain mapped to 0x%x\n", regulatory->current_rd);
 	}
 
 	eeval = ah->eep_ops->get_eeprom(ah, EEP_OP_MODE);
@@ -3719,7 +3706,10 @@
 			AR_EEPROM_EEREGCAP_EN_KK_U1_EVEN;
 	}
 
-	pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
+	/* Advertise midband for AR5416 with FCC midband set in eeprom */
+	if (regulatory->current_rd_ext & (1 << REG_EXT_FCC_MIDBAND) &&
+	    AR_SREV_5416(ah))
+		pCap->reg_cap |= AR_EEPROM_EEREGCAP_EN_FCC_MIDBAND;
 
 	pCap->num_antcfg_5ghz =
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_5GHZ);
@@ -3727,18 +3717,18 @@
 		ah->eep_ops->get_num_ant_config(ah, ATH9K_HAL_FREQ_BAND_2GHZ);
 
 	if (AR_SREV_9280_10_OR_LATER(ah) &&
-	    ath_btcoex_supported(ah->hw_version.subsysid)) {
-		btcoex_info->btactive_gpio = ATH_BTACTIVE_GPIO;
-		btcoex_info->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
+	    ath9k_hw_btcoex_supported(ah)) {
+		btcoex_hw->btactive_gpio = ATH_BTACTIVE_GPIO;
+		btcoex_hw->wlanactive_gpio = ATH_WLANACTIVE_GPIO;
 
 		if (AR_SREV_9285(ah)) {
-			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_3WIRE;
-			btcoex_info->btpriority_gpio = ATH_BTPRIORITY_GPIO;
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_3WIRE;
+			btcoex_hw->btpriority_gpio = ATH_BTPRIORITY_GPIO;
 		} else {
-			btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_2WIRE;
+			btcoex_hw->scheme = ATH_BTCOEX_CFG_2WIRE;
 		}
 	} else {
-		btcoex_info->btcoex_scheme = ATH_BTCOEX_CFG_NONE;
+		btcoex_hw->scheme = ATH_BTCOEX_CFG_NONE;
 	}
 }
 
@@ -3812,6 +3802,7 @@
 		return false;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_getcapability);
 
 bool ath9k_hw_setcapability(struct ath_hw *ah, enum ath9k_capability_type type,
 			    u32 capability, u32 setting, int *status)
@@ -3845,6 +3836,7 @@
 		return false;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_setcapability);
 
 /****************************/
 /* GPIO / RFKILL / Antennae */
@@ -3882,7 +3874,7 @@
 {
 	u32 gpio_shift;
 
-	ASSERT(gpio < ah->caps.num_gpio_pins);
+	BUG_ON(gpio >= ah->caps.num_gpio_pins);
 
 	gpio_shift = gpio << 1;
 
@@ -3891,6 +3883,7 @@
 		(AR_GPIO_OE_OUT_DRV_NO << gpio_shift),
 		(AR_GPIO_OE_OUT_DRV << gpio_shift));
 }
+EXPORT_SYMBOL(ath9k_hw_cfg_gpio_input);
 
 u32 ath9k_hw_gpio_get(struct ath_hw *ah, u32 gpio)
 {
@@ -3909,6 +3902,7 @@
 	else
 		return MS_REG_READ(AR, gpio) != 0;
 }
+EXPORT_SYMBOL(ath9k_hw_gpio_get);
 
 void ath9k_hw_cfg_output(struct ath_hw *ah, u32 gpio,
 			 u32 ah_signal_type)
@@ -3924,22 +3918,26 @@
 		(AR_GPIO_OE_OUT_DRV_ALL << gpio_shift),
 		(AR_GPIO_OE_OUT_DRV << gpio_shift));
 }
+EXPORT_SYMBOL(ath9k_hw_cfg_output);
 
 void ath9k_hw_set_gpio(struct ath_hw *ah, u32 gpio, u32 val)
 {
 	REG_RMW(ah, AR_GPIO_IN_OUT, ((val & 1) << gpio),
 		AR_GPIO_BIT(gpio));
 }
+EXPORT_SYMBOL(ath9k_hw_set_gpio);
 
 u32 ath9k_hw_getdefantenna(struct ath_hw *ah)
 {
 	return REG_READ(ah, AR_DEF_ANTENNA) & 0x7;
 }
+EXPORT_SYMBOL(ath9k_hw_getdefantenna);
 
 void ath9k_hw_setantenna(struct ath_hw *ah, u32 antenna)
 {
 	REG_WRITE(ah, AR_DEF_ANTENNA, (antenna & 0x7));
 }
+EXPORT_SYMBOL(ath9k_hw_setantenna);
 
 bool ath9k_hw_setantennaswitch(struct ath_hw *ah,
 			       enum ath9k_ant_setting settings,
@@ -4002,6 +4000,7 @@
 
 	return bits;
 }
+EXPORT_SYMBOL(ath9k_hw_getrxfilter);
 
 void ath9k_hw_setrxfilter(struct ath_hw *ah, u32 bits)
 {
@@ -4023,19 +4022,30 @@
 		REG_WRITE(ah, AR_RXCFG,
 			  REG_READ(ah, AR_RXCFG) & ~AR_RXCFG_ZLFDMA);
 }
+EXPORT_SYMBOL(ath9k_hw_setrxfilter);
 
 bool ath9k_hw_phy_disable(struct ath_hw *ah)
 {
-	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM);
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_WARM))
+		return false;
+
+	ath9k_hw_init_pll(ah, NULL);
+	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_phy_disable);
 
 bool ath9k_hw_disable(struct ath_hw *ah)
 {
 	if (!ath9k_hw_setpower(ah, ATH9K_PM_AWAKE))
 		return false;
 
-	return ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD);
+	if (!ath9k_hw_set_reset_reg(ah, ATH9K_RESET_COLD))
+		return false;
+
+	ath9k_hw_init_pll(ah, NULL);
+	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_disable);
 
 void ath9k_hw_set_txpowerlimit(struct ath_hw *ah, u32 limit)
 {
@@ -4052,35 +4062,36 @@
 				 min((u32) MAX_RATE_POWER,
 				 (u32) regulatory->power_limit));
 }
+EXPORT_SYMBOL(ath9k_hw_set_txpowerlimit);
 
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac)
 {
-	memcpy(ah->macaddr, mac, ETH_ALEN);
+	memcpy(ath9k_hw_common(ah)->macaddr, mac, ETH_ALEN);
 }
+EXPORT_SYMBOL(ath9k_hw_setmac);
 
 void ath9k_hw_setopmode(struct ath_hw *ah)
 {
 	ath9k_hw_set_operating_mode(ah, ah->opmode);
 }
+EXPORT_SYMBOL(ath9k_hw_setopmode);
 
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1)
 {
 	REG_WRITE(ah, AR_MCAST_FIL0, filter0);
 	REG_WRITE(ah, AR_MCAST_FIL1, filter1);
 }
+EXPORT_SYMBOL(ath9k_hw_setmcastfilter);
 
-void ath9k_hw_setbssidmask(struct ath_softc *sc)
+void ath9k_hw_write_associd(struct ath_hw *ah)
 {
-	REG_WRITE(sc->sc_ah, AR_BSSMSKL, get_unaligned_le32(sc->bssidmask));
-	REG_WRITE(sc->sc_ah, AR_BSSMSKU, get_unaligned_le16(sc->bssidmask + 4));
-}
+	struct ath_common *common = ath9k_hw_common(ah);
 
-void ath9k_hw_write_associd(struct ath_softc *sc)
-{
-	REG_WRITE(sc->sc_ah, AR_BSS_ID0, get_unaligned_le32(sc->curbssid));
-	REG_WRITE(sc->sc_ah, AR_BSS_ID1, get_unaligned_le16(sc->curbssid + 4) |
-		  ((sc->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
+	REG_WRITE(ah, AR_BSS_ID0, get_unaligned_le32(common->curbssid));
+	REG_WRITE(ah, AR_BSS_ID1, get_unaligned_le16(common->curbssid + 4) |
+		  ((common->curaid & 0x3fff) << AR_BSS_ID1_AID_S));
 }
+EXPORT_SYMBOL(ath9k_hw_write_associd);
 
 u64 ath9k_hw_gettsf64(struct ath_hw *ah)
 {
@@ -4091,24 +4102,25 @@
 
 	return tsf;
 }
+EXPORT_SYMBOL(ath9k_hw_gettsf64);
 
 void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64)
 {
 	REG_WRITE(ah, AR_TSF_L32, tsf64 & 0xffffffff);
 	REG_WRITE(ah, AR_TSF_U32, (tsf64 >> 32) & 0xffffffff);
 }
+EXPORT_SYMBOL(ath9k_hw_settsf64);
 
 void ath9k_hw_reset_tsf(struct ath_hw *ah)
 {
-	ath9k_ps_wakeup(ah->ah_sc);
 	if (!ath9k_hw_wait(ah, AR_SLP32_MODE, AR_SLP32_TSF_WRITE_STATUS, 0,
 			   AH_TSF_WRITE_TIMEOUT))
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET,
-			"AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "AR_SLP32_TSF_WRITE_STATUS limit exceeded\n");
 
 	REG_WRITE(ah, AR_RESET_TSF, AR_RESET_TSF_ONCE);
-	ath9k_ps_restore(ah->ah_sc);
 }
+EXPORT_SYMBOL(ath9k_hw_reset_tsf);
 
 void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting)
 {
@@ -4117,11 +4129,13 @@
 	else
 		ah->misc_mode &= ~AR_PCU_TX_ADD_TSF;
 }
+EXPORT_SYMBOL(ath9k_hw_set_tsfadjust);
 
 bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us)
 {
 	if (us < ATH9K_SLOT_TIME_9 || us > ath9k_hw_mac_to_usec(ah, 0xffff)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_RESET, "bad slot time %u\n", us);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_RESET,
+			  "bad slot time %u\n", us);
 		ah->slottime = (u32) -1;
 		return false;
 	} else {
@@ -4130,13 +4144,14 @@
 		return true;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_setslottime);
 
-void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode)
+void ath9k_hw_set11nmac2040(struct ath_hw *ah)
 {
+	struct ieee80211_conf *conf = &ath9k_hw_common(ah)->hw->conf;
 	u32 macmode;
 
-	if (mode == ATH9K_HT_MACMODE_2040 &&
-	    !ah->config.cwm_ignore_extcca)
+	if (conf_is_ht40(conf) && !ah->config.cwm_ignore_extcca)
 		macmode = AR_2040_JOINED_RX_CLEAR;
 	else
 		macmode = 0;
@@ -4193,6 +4208,7 @@
 {
 	return REG_READ(ah, AR_TSF_L32);
 }
+EXPORT_SYMBOL(ath9k_hw_gettsf32);
 
 struct ath_gen_timer *ath_gen_timer_alloc(struct ath_hw *ah,
 					  void (*trigger)(void *),
@@ -4206,8 +4222,9 @@
 	timer = kzalloc(sizeof(struct ath_gen_timer), GFP_KERNEL);
 
 	if (timer == NULL) {
-		printk(KERN_DEBUG "Failed to allocate memory"
-		       "for hw timer[%d]\n", timer_index);
+		ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+			  "Failed to allocate memory"
+			  "for hw timer[%d]\n", timer_index);
 		return NULL;
 	}
 
@@ -4220,10 +4237,12 @@
 
 	return timer;
 }
+EXPORT_SYMBOL(ath_gen_timer_alloc);
 
-void ath_gen_timer_start(struct ath_hw *ah,
-			 struct ath_gen_timer *timer,
-			 u32 timer_next, u32 timer_period)
+void ath9k_hw_gen_timer_start(struct ath_hw *ah,
+			      struct ath_gen_timer *timer,
+			      u32 timer_next,
+			      u32 timer_period)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	u32 tsf;
@@ -4234,8 +4253,9 @@
 
 	tsf = ath9k_hw_gettsf32(ah);
 
-	DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER, "curent tsf %x period %x"
-		"timer_next %x\n", tsf, timer_period, timer_next);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_HWTIMER,
+		  "curent tsf %x period %x"
+		  "timer_next %x\n", tsf, timer_period, timer_next);
 
 	/*
 	 * Pull timer_next forward if the current TSF already passed it
@@ -4258,15 +4278,10 @@
 	REG_SET_BIT(ah, AR_IMR_S5,
 		(SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_THRESH) |
 		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
-
-	if ((ah->ah_sc->imask & ATH9K_INT_GENTIMER) == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		ah->ah_sc->imask |= ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
-	}
 }
+EXPORT_SYMBOL(ath9k_hw_gen_timer_start);
 
-void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 
@@ -4285,14 +4300,8 @@
 		SM(AR_GENTMR_BIT(timer->index), AR_IMR_S5_GENTIMER_TRIG)));
 
 	clear_bit(timer->index, &timer_table->timer_mask.timer_bits);
-
-	/* if no timer is enabled, turn off interrupt mask */
-	if (timer_table->timer_mask.val == 0) {
-		ath9k_hw_set_interrupts(ah, 0);
-		ah->ah_sc->imask &= ~ATH9K_INT_GENTIMER;
-		ath9k_hw_set_interrupts(ah, ah->ah_sc->imask);
-	}
 }
+EXPORT_SYMBOL(ath9k_hw_gen_timer_stop);
 
 void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer)
 {
@@ -4302,6 +4311,7 @@
 	timer_table->timers[timer->index] = NULL;
 	kfree(timer);
 }
+EXPORT_SYMBOL(ath_gen_timer_free);
 
 /*
  * Generic Timer Interrupts handling
@@ -4310,6 +4320,7 @@
 {
 	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
 	struct ath_gen_timer *timer;
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 trigger_mask, thresh_mask, index;
 
 	/* get hardware generic timer interrupt status */
@@ -4324,8 +4335,8 @@
 		index = rightmost_index(timer_table, &thresh_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
-			"TSF overflow for Gen timer %d\n", index);
+		ath_print(common, ATH_DBG_HWTIMER,
+			  "TSF overflow for Gen timer %d\n", index);
 		timer->overflow(timer->arg);
 	}
 
@@ -4333,21 +4344,9 @@
 		index = rightmost_index(timer_table, &trigger_mask);
 		timer = timer_table->timers[index];
 		BUG_ON(!timer);
-		DPRINTF(ah->ah_sc, ATH_DBG_HWTIMER,
-			"Gen timer[%d] trigger\n", index);
+		ath_print(common, ATH_DBG_HWTIMER,
+			  "Gen timer[%d] trigger\n", index);
 		timer->trigger(timer->arg);
 	}
 }
-
-/*
- * Primitive to disable ASPM
- */
-void ath_pcie_aspm_disable(struct ath_softc *sc)
-{
-	struct pci_dev *pdev = to_pci_dev(sc->dev);
-	u8 aspm;
-
-	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
-	aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
-	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
-}
+EXPORT_SYMBOL(ath_gen_timer_isr);
diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h
index b892345..cdaec52 100644
--- a/drivers/net/wireless/ath/ath9k/hw.h
+++ b/drivers/net/wireless/ath/ath9k/hw.h
@@ -27,17 +27,24 @@
 #include "calib.h"
 #include "reg.h"
 #include "phy.h"
+#include "btcoex.h"
 
 #include "../regd.h"
+#include "../debug.h"
 
 #define ATHEROS_VENDOR_ID	0x168c
+
 #define AR5416_DEVID_PCI	0x0023
 #define AR5416_DEVID_PCIE	0x0024
 #define AR9160_DEVID_PCI	0x0027
 #define AR9280_DEVID_PCI	0x0029
 #define AR9280_DEVID_PCIE	0x002a
 #define AR9285_DEVID_PCIE	0x002b
+
 #define AR5416_AR9100_DEVID	0x000b
+
+#define AR9271_USB             0x9271
+
 #define	AR_SUBVENDOR_ID_NOG	0x0e11
 #define AR_SUBVENDOR_ID_NEW_A	0x7065
 #define AR5416_MAGIC		0x19641014
@@ -49,9 +56,18 @@
 #define AT9285_COEX3WIRE_SA_SUBSYSID	0x30aa
 #define AT9285_COEX3WIRE_DA_SUBSYSID	0x30ab
 
+#define ATH_AMPDU_LIMIT_MAX        (64 * 1024 - 1)
+
+#define	ATH_DEFAULT_NOISE_FLOOR -95
+
+#define ATH9K_RSSI_BAD			0x80
+
 /* Register read/write primitives */
-#define REG_WRITE(_ah, _reg, _val) ath9k_iowrite32((_ah), (_reg), (_val))
-#define REG_READ(_ah, _reg) ath9k_ioread32((_ah), (_reg))
+#define REG_WRITE(_ah, _reg, _val) \
+	ath9k_hw_common(_ah)->ops->write((_ah), (_val), (_reg))
+
+#define REG_READ(_ah, _reg) \
+	ath9k_hw_common(_ah)->ops->read((_ah), (_reg))
 
 #define SM(_v, _f)  (((_v) << _f##_S) & _f)
 #define MS(_v, _f)  (((_v) & _f) >> _f##_S)
@@ -91,7 +107,7 @@
 #define AR_GPIO_BIT(_gpio)          (1 << (_gpio))
 
 #define BASE_ACTIVATE_DELAY         100
-#define RTC_PLL_SETTLE_DELAY        1000
+#define RTC_PLL_SETTLE_DELAY        100
 #define COEF_SCALE_S                24
 #define HT40_CHANNEL_CENTER_SHIFT   10
 
@@ -433,7 +449,8 @@
 };
 
 struct ath_hw {
-	struct ath_softc *ah_sc;
+	struct ieee80211_hw *hw;
+	struct ath_common common;
 	struct ath9k_hw_version hw_version;
 	struct ath9k_ops_config config;
 	struct ath9k_hw_capabilities caps;
@@ -450,7 +467,6 @@
 
 	bool sw_mgmt_crypto;
 	bool is_pciexpress;
-	u8 macaddr[ETH_ALEN];
 	u16 tx_trig_level;
 	u16 rfsilent;
 	u32 rfkill_gpio;
@@ -553,8 +569,10 @@
 	int firpwr[5];
 	enum ath9k_ani_cmd ani_function;
 
+	/* Bluetooth coexistance */
+	struct ath_btcoex_hw btcoex_hw;
+
 	u32 intr_txqs;
-	enum ath9k_ht_extprotspacing extprotspacing;
 	u8 txchainmask;
 	u8 rxchainmask;
 
@@ -578,12 +596,24 @@
 	struct ar5416IniArray iniModesAdditional;
 	struct ar5416IniArray iniModesRxGain;
 	struct ar5416IniArray iniModesTxGain;
+	struct ar5416IniArray iniCckfirNormal;
+	struct ar5416IniArray iniCckfirJapan2484;
 
 	u32 intr_gen_timer_trigger;
 	u32 intr_gen_timer_thresh;
 	struct ath_gen_timer_table hw_gen_timers;
 };
 
+static inline struct ath_common *ath9k_hw_common(struct ath_hw *ah)
+{
+	return &ah->common;
+}
+
+static inline struct ath_regulatory *ath9k_hw_regulatory(struct ath_hw *ah)
+{
+	return &(ath9k_hw_common(ah)->regulatory);
+}
+
 /* Initialization, Detach, Reset */
 const char *ath9k_hw_probe(u16 vendorid, u16 devid);
 void ath9k_hw_detach(struct ath_hw *ah);
@@ -637,19 +667,20 @@
 void ath9k_hw_setmac(struct ath_hw *ah, const u8 *mac);
 void ath9k_hw_setopmode(struct ath_hw *ah);
 void ath9k_hw_setmcastfilter(struct ath_hw *ah, u32 filter0, u32 filter1);
-void ath9k_hw_setbssidmask(struct ath_softc *sc);
-void ath9k_hw_write_associd(struct ath_softc *sc);
+void ath9k_hw_setbssidmask(struct ath_hw *ah);
+void ath9k_hw_write_associd(struct ath_hw *ah);
 u64 ath9k_hw_gettsf64(struct ath_hw *ah);
 void ath9k_hw_settsf64(struct ath_hw *ah, u64 tsf64);
 void ath9k_hw_reset_tsf(struct ath_hw *ah);
 void ath9k_hw_set_tsfadjust(struct ath_hw *ah, u32 setting);
 bool ath9k_hw_setslottime(struct ath_hw *ah, u32 us);
-void ath9k_hw_set11nmac2040(struct ath_hw *ah, enum ath9k_ht_macmode mode);
+void ath9k_hw_set11nmac2040(struct ath_hw *ah);
 void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period);
 void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah,
 				    const struct ath9k_beacon_state *bs);
-bool ath9k_hw_setpower(struct ath_hw *ah,
-		       enum ath9k_power_mode mode);
+
+bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode);
+
 void ath9k_hw_configpcipowersave(struct ath_hw *ah, int restore, int power_off);
 
 /* Interrupt Handling */
@@ -663,9 +694,12 @@
 					  void (*overflow)(void *),
 					  void *arg,
 					  u8 timer_index);
-void ath_gen_timer_start(struct ath_hw *ah, struct ath_gen_timer *timer,
-			 u32 timer_next, u32 timer_period);
-void ath_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
+void ath9k_hw_gen_timer_start(struct ath_hw *ah,
+			      struct ath_gen_timer *timer,
+			      u32 timer_next,
+			      u32 timer_period);
+void ath9k_hw_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer);
+
 void ath_gen_timer_free(struct ath_hw *ah, struct ath_gen_timer *timer);
 void ath_gen_timer_isr(struct ath_hw *hw);
 u32 ath9k_hw_gettsf32(struct ath_hw *ah);
@@ -674,5 +708,4 @@
 #define ATH_PCIE_CAP_LINK_L0S	1
 #define ATH_PCIE_CAP_LINK_L1	2
 
-void ath_pcie_aspm_disable(struct ath_softc *sc);
 #endif
diff --git a/drivers/net/wireless/ath/ath9k/initvals.h b/drivers/net/wireless/ath/ath9k/initvals.h
index 8622265..3ee6658 100644
--- a/drivers/net/wireless/ath/ath9k/initvals.h
+++ b/drivers/net/wireless/ath/ath9k/initvals.h
@@ -21,6 +21,8 @@
     { 0x000010f0, 0x0000a000, 0x00014000, 0x00016000, 0x0000b000, 0x00014008 },
     { 0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00, 0x06e006e0 },
     { 0x0000801c, 0x128d93a7, 0x128d93cf, 0x12e013d7, 0x12e013ab, 0x098813cf },
+    { 0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810, 0x08f04810 },
+    { 0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a, 0x0000320a },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
     { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
@@ -31,11 +33,11 @@
     { 0x00009848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
     { 0x0000a848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
     { 0x0000b848, 0x001a6a65, 0x001a6a65, 0x00197a68, 0x00197a68, 0x00197a68 },
-    { 0x00009850, 0x6c48b4e0, 0x6c48b4e0, 0x6c48b0de, 0x6c48b0de, 0x6c48b0de },
+    { 0x00009850, 0x6c48b4e0, 0x6d48b4e0, 0x6d48b0de, 0x6c48b0de, 0x6c48b0de },
     { 0x00009858, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e, 0x7ec82d2e },
-    { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e, 0x31395d5e },
+    { 0x0000985c, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e, 0x31395d5e },
     { 0x00009860, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18, 0x00049d18 },
-    { 0x0000c864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
+    { 0x00009864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190, 0x409a4190 },
     { 0x0000986c, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081, 0x050cb081 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
@@ -46,10 +48,10 @@
     { 0x0000a960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
     { 0x0000b960, 0x00000900, 0x00000900, 0x00012d80, 0x00012d80, 0x00012d80 },
     { 0x00009964, 0x00000000, 0x00000000, 0x00001120, 0x00001120, 0x00001120 },
-    { 0x0000c9bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
+    { 0x000099bc, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00, 0x001a0a00 },
     { 0x000099c0, 0x038919be, 0x038919be, 0x038919be, 0x038919be, 0x038919be },
     { 0x000099c4, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77, 0x06336f77 },
-    { 0x000099c8, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c, 0x60f6532c },
+    { 0x000099c8, 0x6af6532c, 0x6af6532c, 0x6af6532c, 0x6af6532c, 0x6af6532c },
     { 0x000099cc, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8, 0x08f186c8 },
     { 0x000099d0, 0x00046384, 0x00046384, 0x00046384, 0x00046384, 0x00046384 },
     { 0x000099d4, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
@@ -199,7 +201,6 @@
     { 0x00008110, 0x00000168 },
     { 0x00008118, 0x000100aa },
     { 0x0000811c, 0x00003210 },
-    { 0x00008120, 0x08f04800 },
     { 0x00008124, 0x00000000 },
     { 0x00008128, 0x00000000 },
     { 0x0000812c, 0x00000000 },
@@ -215,7 +216,6 @@
     { 0x00008178, 0x00000100 },
     { 0x0000817c, 0x00000000 },
     { 0x000081c4, 0x00000000 },
-    { 0x000081d0, 0x00003210 },
     { 0x000081ec, 0x00000000 },
     { 0x000081f0, 0x00000000 },
     { 0x000081f4, 0x00000000 },
@@ -246,6 +246,7 @@
     { 0x00008258, 0x00000000 },
     { 0x0000825c, 0x400000ff },
     { 0x00008260, 0x00080922 },
+    { 0x00008264, 0xa8000010 },
     { 0x00008270, 0x00000000 },
     { 0x00008274, 0x40000000 },
     { 0x00008278, 0x003e4180 },
@@ -406,9 +407,9 @@
     { 0x0000a25c, 0x0f0f0f01 },
     { 0x0000a260, 0xdfa91f01 },
     { 0x0000a268, 0x00000000 },
-    { 0x0000a26c, 0x0ebae9c6 },
-    { 0x0000b26c, 0x0ebae9c6 },
-    { 0x0000c26c, 0x0ebae9c6 },
+    { 0x0000a26c, 0x0e79e5c6 },
+    { 0x0000b26c, 0x0e79e5c6 },
+    { 0x0000c26c, 0x0e79e5c6 },
     { 0x0000d270, 0x00820820 },
     { 0x0000a278, 0x1ce739ce },
     { 0x0000a27c, 0x051701ce },
@@ -2551,26 +2552,27 @@
     { 0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440, 0x00006880 },
     { 0x00009804, 0x00000300, 0x000003c4, 0x000003c4, 0x00000300, 0x00000303 },
     { 0x00009820, 0x02020200, 0x02020200, 0x02020200, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
+    { 0x00009824, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e, 0x01000e0e },
     { 0x00009828, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001, 0x0a020001 },
     { 0x00009834, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e, 0x00000e0e },
     { 0x00009838, 0x00000007, 0x00000007, 0x00000007, 0x00000007, 0x00000007 },
     { 0x00009840, 0x206a022e, 0x206a022e, 0x206a012e, 0x206a012e, 0x206a012e },
     { 0x00009844, 0x0372161e, 0x0372161e, 0x037216a0, 0x037216a0, 0x037216a0 },
-    { 0x00009850, 0x6c4000e2, 0x6c4000e2, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
+    { 0x00009850, 0x6c4000e2, 0x6d4000e2, 0x6d4000e2, 0x6c4000e2, 0x6c4000e2 },
     { 0x00009858, 0x7ec88d2e, 0x7ec88d2e, 0x7ec84d2e, 0x7ec84d2e, 0x7ec84d2e },
-    { 0x0000985c, 0x31395d5e, 0x31395d5e, 0x3139605e, 0x31395d5e, 0x31395d5e },
+    { 0x0000985c, 0x31395d5e, 0x3139605e, 0x3139605e, 0x31395d5e, 0x31395d5e },
     { 0x00009860, 0x00048d18, 0x00048d18, 0x00048d20, 0x00048d20, 0x00048d18 },
     { 0x00009864, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00, 0x0001ce00 },
     { 0x00009868, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0, 0x5ac640d0 },
     { 0x0000986c, 0x06903081, 0x06903081, 0x06903881, 0x06903881, 0x06903881 },
     { 0x00009914, 0x000007d0, 0x00000fa0, 0x00001130, 0x00000898, 0x000007d0 },
-    { 0x00009918, 0x0000000a, 0x00000014, 0x00000016, 0x0000000b, 0x00000016 },
+    { 0x00009918, 0x0000000a, 0x00000014, 0x00000268, 0x0000000b, 0x00000016 },
     { 0x00009924, 0xd00a8a0b, 0xd00a8a0b, 0xd00a8a0d, 0xd00a8a0d, 0xd00a8a0d },
     { 0x00009944, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010, 0xffbc1010 },
     { 0x00009960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
     { 0x0000a960, 0x00000010, 0x00000010, 0x00000010, 0x00000010, 0x00000010 },
     { 0x00009964, 0x00000210, 0x00000210, 0x00000210, 0x00000210, 0x00000210 },
+    { 0x0000c968, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce, 0x000003ce },
     { 0x000099b8, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c, 0x0000001c },
     { 0x000099bc, 0x00000a00, 0x00000a00, 0x00000c00, 0x00000c00, 0x00000c00 },
     { 0x000099c0, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4, 0x05eea6d4 },
@@ -2585,8 +2587,10 @@
     { 0x0000b20c, 0x00000014, 0x00000014, 0x0001f019, 0x0001f019, 0x0001f019 },
     { 0x0000a21c, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a, 0x1883800a },
     { 0x0000a230, 0x00000000, 0x00000000, 0x00000210, 0x00000108, 0x00000000 },
+    { 0x0000a23c, 0x13c88000, 0x13c88000, 0x13c88001, 0x13c88000, 0x13c88000 },
     { 0x0000a250, 0x001ff000, 0x001ff000, 0x0004a000, 0x0004a000, 0x0004a000 },
     { 0x0000a358, 0x7999aa02, 0x7999aa02, 0x7999aa0e, 0x7999aa0e, 0x7999aa0e },
+    { 0x0000a388, 0x0c000000, 0x0c000000, 0x08000000, 0x0c000000, 0x0c000000 },
     { 0x0000a3d8, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x00007894, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000, 0x5a508000 },
 };
@@ -2813,7 +2817,6 @@
     { 0x00009958, 0x2108ecff },
     { 0x00009940, 0x14750604 },
     { 0x0000c95c, 0x004b6a8e },
-    { 0x0000c968, 0x000003ce },
     { 0x00009970, 0x190fb515 },
     { 0x00009974, 0x00000000 },
     { 0x00009978, 0x00000001 },
@@ -2849,7 +2852,6 @@
     { 0x0000a22c, 0x233f7180 },
     { 0x0000a234, 0x20202020 },
     { 0x0000a238, 0x20202020 },
-    { 0x0000a23c, 0x13c88000 },
     { 0x0000a240, 0x38490a20 },
     { 0x0000a244, 0x00007bb6 },
     { 0x0000a248, 0x0fff3ffc },
@@ -2859,8 +2861,8 @@
     { 0x0000a25c, 0x0f0f0f01 },
     { 0x0000a260, 0xdfa91f01 },
     { 0x0000a268, 0x00000000 },
-    { 0x0000a26c, 0x0ebae9c6 },
-    { 0x0000b26c, 0x0ebae9c6 },
+    { 0x0000a26c, 0x0e79e5c6 },
+    { 0x0000b26c, 0x0e79e5c6 },
     { 0x0000d270, 0x00820820 },
     { 0x0000a278, 0x1ce739ce },
     { 0x0000d35c, 0x07ffffef },
@@ -2874,7 +2876,6 @@
     { 0x0000d37c, 0x7fffffe2 },
     { 0x0000d380, 0x7f3c7bba },
     { 0x0000d384, 0xf3307ff0 },
-    { 0x0000a388, 0x0c000000 },
     { 0x0000a38c, 0x20202020 },
     { 0x0000a390, 0x20202020 },
     { 0x0000a394, 0x1ce739ce },
@@ -2940,7 +2941,7 @@
     { 0x0000801c, 0x148ec02b, 0x148ec057 },
     { 0x00008318, 0x000044c0, 0x00008980 },
     { 0x00009820, 0x02020200, 0x02020200 },
-    { 0x00009824, 0x00000f0f, 0x00000f0f },
+    { 0x00009824, 0x01000f0f, 0x01000f0f },
     { 0x00009828, 0x0b020001, 0x0b020001 },
     { 0x00009834, 0x00000f0f, 0x00000f0f },
     { 0x00009844, 0x03721821, 0x03721821 },
@@ -3348,6 +3349,8 @@
 };
 
 static const u32 ar9280Modes_high_power_tx_gain_9280_2[][6] = {
+    { 0x0000a274, 0x0a19e652, 0x0a19e652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a27c, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce },
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x0000a304, 0x00003002, 0x00003002, 0x00004002, 0x00004002, 0x00004002 },
     { 0x0000a308, 0x00006004, 0x00006004, 0x00007008, 0x00007008, 0x00007008 },
@@ -3376,11 +3379,11 @@
     { 0x00007840, 0x00172000, 0x00172000, 0x00172000, 0x00172000, 0x00172000 },
     { 0x00007820, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480 },
     { 0x00007844, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480, 0xf258a480 },
-    { 0x0000a274, 0x0a19e652, 0x0a19e652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
-    { 0x0000a27c, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce, 0x050739ce },
 };
 
 static const u32 ar9280Modes_original_tx_gain_9280_2[][6] = {
+    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
+    { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce },
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
     { 0x0000a304, 0x00003002, 0x00003002, 0x00003002, 0x00003002, 0x00003002 },
     { 0x0000a308, 0x00006004, 0x00006004, 0x00008009, 0x00008009, 0x00008009 },
@@ -3409,8 +3412,6 @@
     { 0x00007840, 0x00392000, 0x00392000, 0x00392000, 0x00392000, 0x00392000 },
     { 0x00007820, 0x92592480, 0x92592480, 0x92592480, 0x92592480, 0x92592480 },
     { 0x00007844, 0x92592480, 0x92592480, 0x92592480, 0x92592480, 0x92592480 },
-    { 0x0000a274, 0x0a19c652, 0x0a19c652, 0x0a1aa652, 0x0a1aa652, 0x0a1aa652 },
-    { 0x0000a27c, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce, 0x050701ce },
 };
 
 static const u32 ar9280PciePhy_clkreq_off_L1_9280[][2] = {
@@ -5918,9 +5919,6 @@
     { 0x000099ec, 0x0cc80caa },
     { 0x000099f0, 0x00000000 },
     { 0x000099fc, 0x00001042 },
-    { 0x0000a1f4, 0x00fffeff },
-    { 0x0000a1f8, 0x00f5f9ff },
-    { 0x0000a1fc, 0xb79f6427 },
     { 0x0000a208, 0x803e4788 },
     { 0x0000a210, 0x4080a333 },
     { 0x0000a214, 0x40206c10 },
@@ -5980,7 +5978,7 @@
     { 0x0000b3f4, 0x00000000 },
     { 0x0000a7d8, 0x000003f1 },
     { 0x00007800, 0x00000800 },
-    { 0x00007804, 0x6c35ffc2 },
+    { 0x00007804, 0x6c35ffd2 },
     { 0x00007808, 0x6db6c000 },
     { 0x0000780c, 0x6db6cb30 },
     { 0x00007810, 0x6db6cb6c },
@@ -6000,7 +5998,7 @@
     { 0x00007848, 0x934934a8 },
     { 0x00007850, 0x00000000 },
     { 0x00007854, 0x00000800 },
-    { 0x00007858, 0x6c35ffc2 },
+    { 0x00007858, 0x6c35ffd2 },
     { 0x0000785c, 0x6db6c000 },
     { 0x00007860, 0x6db6cb30 },
     { 0x00007864, 0x6db6cb6c },
@@ -6027,6 +6025,22 @@
     { 0x000078b8, 0x2a850160 },
 };
 
+/*
+ * For Japanese regulatory requirements, 2484 MHz requires the following three
+ * registers be programmed differently from the channel between 2412 and 2472 MHz.
+ */
+static const u_int32_t ar9287Common_normal_cck_fir_coeff_92871_1[][2] = {
+    { 0x0000a1f4, 0x00fffeff },
+    { 0x0000a1f8, 0x00f5f9ff },
+    { 0x0000a1fc, 0xb79f6427 },
+};
+
+static const u_int32_t ar9287Common_japan_2484_cck_fir_coeff_92871_1[][2] = {
+    { 0x0000a1f4, 0x00000000 },
+    { 0x0000a1f8, 0xefff0301 },
+    { 0x0000a1fc, 0xca9228ee },
+};
+
 static const u_int32_t ar9287Modes_tx_gain_9287_1_1[][6] = {
     /* Address      5G-HT20     5G-HT40     2G-HT40     2G-HT20     Turbo   */
     { 0x0000a300, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000 },
diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c
index 800bfab..46466ff 100644
--- a/drivers/net/wireless/ath/ath9k/mac.c
+++ b/drivers/net/wireless/ath/ath9k/mac.c
@@ -14,16 +14,16 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 static void ath9k_hw_set_txq_interrupts(struct ath_hw *ah,
 					struct ath9k_tx_queue_info *qi)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_INTERRUPT,
-		"tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
-		ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
-		ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
-		ah->txurn_interrupt_mask);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_INTERRUPT,
+		  "tx ok 0x%x err 0x%x desc 0x%x eol 0x%x urn 0x%x\n",
+		  ah->txok_interrupt_mask, ah->txerr_interrupt_mask,
+		  ah->txdesc_interrupt_mask, ah->txeol_interrupt_mask,
+		  ah->txurn_interrupt_mask);
 
 	REG_WRITE(ah, AR_IMR_S0,
 		  SM(ah->txok_interrupt_mask, AR_IMR_S0_QCU_TXOK)
@@ -39,17 +39,21 @@
 {
 	return REG_READ(ah, AR_QTXDP(q));
 }
+EXPORT_SYMBOL(ath9k_hw_gettxbuf);
 
 void ath9k_hw_puttxbuf(struct ath_hw *ah, u32 q, u32 txdp)
 {
 	REG_WRITE(ah, AR_QTXDP(q), txdp);
 }
+EXPORT_SYMBOL(ath9k_hw_puttxbuf);
 
 void ath9k_hw_txstart(struct ath_hw *ah, u32 q)
 {
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Enable TXE on queue: %u\n", q);
+	ath_print(ath9k_hw_common(ah), ATH_DBG_QUEUE,
+		  "Enable TXE on queue: %u\n", q);
 	REG_WRITE(ah, AR_Q_TXE, 1 << q);
 }
+EXPORT_SYMBOL(ath9k_hw_txstart);
 
 u32 ath9k_hw_numtxpending(struct ath_hw *ah, u32 q)
 {
@@ -64,6 +68,7 @@
 
 	return npend;
 }
+EXPORT_SYMBOL(ath9k_hw_numtxpending);
 
 bool ath9k_hw_updatetxtriglevel(struct ath_hw *ah, bool bIncTrigLevel)
 {
@@ -93,27 +98,28 @@
 
 	return newLevel != curLevel;
 }
+EXPORT_SYMBOL(ath9k_hw_updatetxtriglevel);
 
 bool ath9k_hw_stoptxdma(struct ath_hw *ah, u32 q)
 {
 #define ATH9K_TX_STOP_DMA_TIMEOUT	4000    /* usec */
 #define ATH9K_TIME_QUANTUM		100     /* usec */
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 	u32 tsfLow, j, wait;
 	u32 wait_time = ATH9K_TX_STOP_DMA_TIMEOUT / ATH9K_TIME_QUANTUM;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Stopping TX DMA, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Stopping TX DMA, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -126,9 +132,9 @@
 	}
 
 	if (ath9k_hw_numtxpending(ah, q)) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-			"%s: Num of pending TX Frames %d on Q %d\n",
-			__func__, ath9k_hw_numtxpending(ah, q), q);
+		ath_print(common, ATH_DBG_QUEUE,
+			  "%s: Num of pending TX Frames %d on Q %d\n",
+			  __func__, ath9k_hw_numtxpending(ah, q), q);
 
 		for (j = 0; j < 2; j++) {
 			tsfLow = REG_READ(ah, AR_TSF_L32);
@@ -142,9 +148,9 @@
 			if ((REG_READ(ah, AR_TSF_L32) >> 10) == (tsfLow >> 10))
 				break;
 
-			DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-				"TSF has moved while trying to set "
-				"quiet time TSF: 0x%08x\n", tsfLow);
+			ath_print(common, ATH_DBG_QUEUE,
+				  "TSF has moved while trying to set "
+				  "quiet time TSF: 0x%08x\n", tsfLow);
 		}
 
 		REG_SET_BIT(ah, AR_DIAG_SW, AR_DIAG_FORCE_CH_IDLE_HIGH);
@@ -155,9 +161,9 @@
 		wait = wait_time;
 		while (ath9k_hw_numtxpending(ah, q)) {
 			if ((--wait) == 0) {
-				DPRINTF(ah->ah_sc, ATH_DBG_QUEUE,
-					"Failed to stop TX DMA in 100 "
-					"msec after killing last frame\n");
+				ath_print(common, ATH_DBG_QUEUE,
+					  "Failed to stop TX DMA in 100 "
+					  "msec after killing last frame\n");
 				break;
 			}
 			udelay(ATH9K_TIME_QUANTUM);
@@ -172,6 +178,7 @@
 #undef ATH9K_TX_STOP_DMA_TIMEOUT
 #undef ATH9K_TIME_QUANTUM
 }
+EXPORT_SYMBOL(ath9k_hw_stoptxdma);
 
 void ath9k_hw_filltxdesc(struct ath_hw *ah, struct ath_desc *ds,
 			 u32 segLen, bool firstSeg,
@@ -198,6 +205,7 @@
 	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
 	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
 }
+EXPORT_SYMBOL(ath9k_hw_filltxdesc);
 
 void ath9k_hw_cleartxdesc(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -209,6 +217,7 @@
 	ads->ds_txstatus6 = ads->ds_txstatus7 = 0;
 	ads->ds_txstatus8 = ads->ds_txstatus9 = 0;
 }
+EXPORT_SYMBOL(ath9k_hw_cleartxdesc);
 
 int ath9k_hw_txprocdesc(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -284,6 +293,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_txprocdesc);
 
 void ath9k_hw_set11n_txdesc(struct ath_hw *ah, struct ath_desc *ds,
 			    u32 pktLen, enum ath9k_pkt_type type, u32 txPower,
@@ -319,6 +329,7 @@
 		ads->ds_ctl11 = 0;
 	}
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_txdesc);
 
 void ath9k_hw_set11n_ratescenario(struct ath_hw *ah, struct ath_desc *ds,
 				  struct ath_desc *lastds,
@@ -374,6 +385,7 @@
 	last_ads->ds_ctl2 = ads->ds_ctl2;
 	last_ads->ds_ctl3 = ads->ds_ctl3;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_ratescenario);
 
 void ath9k_hw_set11n_aggr_first(struct ath_hw *ah, struct ath_desc *ds,
 				u32 aggrLen)
@@ -384,6 +396,7 @@
 	ads->ds_ctl6 &= ~AR_AggrLen;
 	ads->ds_ctl6 |= SM(aggrLen, AR_AggrLen);
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_first);
 
 void ath9k_hw_set11n_aggr_middle(struct ath_hw *ah, struct ath_desc *ds,
 				 u32 numDelims)
@@ -398,6 +411,7 @@
 	ctl6 |= SM(numDelims, AR_PadDelim);
 	ads->ds_ctl6 = ctl6;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_middle);
 
 void ath9k_hw_set11n_aggr_last(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -407,6 +421,7 @@
 	ads->ds_ctl1 &= ~AR_MoreAggr;
 	ads->ds_ctl6 &= ~AR_PadDelim;
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_aggr_last);
 
 void ath9k_hw_clr11n_aggr(struct ath_hw *ah, struct ath_desc *ds)
 {
@@ -414,6 +429,7 @@
 
 	ads->ds_ctl1 &= (~AR_IsAggr & ~AR_MoreAggr);
 }
+EXPORT_SYMBOL(ath9k_hw_clr11n_aggr);
 
 void ath9k_hw_set11n_burstduration(struct ath_hw *ah, struct ath_desc *ds,
 				   u32 burstDuration)
@@ -423,6 +439,7 @@
 	ads->ds_ctl2 &= ~AR_BurstDur;
 	ads->ds_ctl2 |= SM(burstDuration, AR_BurstDur);
 }
+EXPORT_SYMBOL(ath9k_hw_set11n_burstduration);
 
 void ath9k_hw_set11n_virtualmorefrag(struct ath_hw *ah, struct ath_desc *ds,
 				     u32 vmf)
@@ -440,28 +457,30 @@
 	*txqs &= ah->intr_txqs;
 	ah->intr_txqs &= ~(*txqs);
 }
+EXPORT_SYMBOL(ath9k_hw_gettxintrtxqs);
 
 bool ath9k_hw_set_txq_props(struct ath_hw *ah, int q,
 			    const struct ath9k_tx_queue_info *qinfo)
 {
 	u32 cw;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set TXQ properties, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Set TXQ properties, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Set queue properties for: %u\n", q);
 
 	qi->tqi_ver = qinfo->tqi_ver;
 	qi->tqi_subtype = qinfo->tqi_subtype;
@@ -510,23 +529,25 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_set_txq_props);
 
 bool ath9k_hw_get_txq_props(struct ath_hw *ah, int q,
 			    struct ath9k_tx_queue_info *qinfo)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Get TXQ properties, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Get TXQ properties, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
@@ -547,10 +568,12 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_get_txq_props);
 
 int ath9k_hw_setuptxqueue(struct ath_hw *ah, enum ath9k_tx_queue type,
 			  const struct ath9k_tx_queue_info *qinfo)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info *qi;
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
 	int q;
@@ -574,23 +597,23 @@
 			    ATH9K_TX_QUEUE_INACTIVE)
 				break;
 		if (q == pCap->total_queues) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"No available TX queue\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "No available TX queue\n");
 			return -1;
 		}
 		break;
 	default:
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL, "Invalid TX queue type: %u\n",
-			type);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Invalid TX queue type: %u\n", type);
 		return -1;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Setup TX queue: %u\n", q);
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type != ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"TX queue: %u already active\n", q);
+		ath_print(common, ATH_DBG_FATAL,
+			  "TX queue: %u already active\n", q);
 		return -1;
 	}
 	memset(qi, 0, sizeof(struct ath9k_tx_queue_info));
@@ -613,25 +636,27 @@
 
 	return q;
 }
+EXPORT_SYMBOL(ath9k_hw_setuptxqueue);
 
 bool ath9k_hw_releasetxqueue(struct ath_hw *ah, u32 q)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info *qi;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TXQ, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Release TXQ, "
+			  "inactive queue: %u\n", q);
 		return false;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Release TX queue: %u\n", q);
 
 	qi->tqi_type = ATH9K_TX_QUEUE_INACTIVE;
 	ah->txok_interrupt_mask &= ~(1 << q);
@@ -643,28 +668,30 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_releasetxqueue);
 
 bool ath9k_hw_resettxqueue(struct ath_hw *ah, u32 q)
 {
 	struct ath9k_hw_capabilities *pCap = &ah->caps;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_channel *chan = ah->curchan;
 	struct ath9k_tx_queue_info *qi;
 	u32 cwMin, chanCwMin, value;
 
 	if (q >= pCap->total_queues) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
-			"invalid queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
+			  "invalid queue: %u\n", q);
 		return false;
 	}
 
 	qi = &ah->txq[q];
 	if (qi->tqi_type == ATH9K_TX_QUEUE_INACTIVE) {
-		DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TXQ, "
-			"inactive queue: %u\n", q);
+		ath_print(common, ATH_DBG_QUEUE, "Reset TXQ, "
+			  "inactive queue: %u\n", q);
 		return true;
 	}
 
-	DPRINTF(ah->ah_sc, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
+	ath_print(common, ATH_DBG_QUEUE, "Reset TX queue: %u\n", q);
 
 	if (qi->tqi_cwmin == ATH9K_TXQ_USEDEFAULT) {
 		if (chan && IS_CHAN_B(chan))
@@ -799,6 +826,7 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_resettxqueue);
 
 int ath9k_hw_rxprocdesc(struct ath_hw *ah, struct ath_desc *ds,
 			u32 pa, struct ath_desc *nds, u64 tsf)
@@ -880,6 +908,7 @@
 
 	return 0;
 }
+EXPORT_SYMBOL(ath9k_hw_rxprocdesc);
 
 void ath9k_hw_setuprxdesc(struct ath_hw *ah, struct ath_desc *ds,
 			  u32 size, u32 flags)
@@ -895,6 +924,7 @@
 	if (!(pCap->hw_caps & ATH9K_HW_CAP_AUTOSLEEP))
 		memset(&(ads->u), 0, sizeof(ads->u));
 }
+EXPORT_SYMBOL(ath9k_hw_setuprxdesc);
 
 bool ath9k_hw_setrxabort(struct ath_hw *ah, bool set)
 {
@@ -911,8 +941,9 @@
 				     AR_DIAG_RX_ABORT));
 
 			reg = REG_READ(ah, AR_OBS_BUS_1);
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"RX failed to go idle in 10 ms RXSM=0x%x\n", reg);
+			ath_print(ath9k_hw_common(ah), ATH_DBG_FATAL,
+				  "RX failed to go idle in 10 ms RXSM=0x%x\n",
+				  reg);
 
 			return false;
 		}
@@ -923,16 +954,19 @@
 
 	return true;
 }
+EXPORT_SYMBOL(ath9k_hw_setrxabort);
 
 void ath9k_hw_putrxbuf(struct ath_hw *ah, u32 rxdp)
 {
 	REG_WRITE(ah, AR_RXDP, rxdp);
 }
+EXPORT_SYMBOL(ath9k_hw_putrxbuf);
 
 void ath9k_hw_rxena(struct ath_hw *ah)
 {
 	REG_WRITE(ah, AR_CR, AR_CR_RXE);
 }
+EXPORT_SYMBOL(ath9k_hw_rxena);
 
 void ath9k_hw_startpcureceive(struct ath_hw *ah)
 {
@@ -942,6 +976,7 @@
 
 	REG_CLR_BIT(ah, AR_DIAG_SW, (AR_DIAG_RX_DIS | AR_DIAG_RX_ABORT));
 }
+EXPORT_SYMBOL(ath9k_hw_startpcureceive);
 
 void ath9k_hw_stoppcurecv(struct ath_hw *ah)
 {
@@ -949,12 +984,13 @@
 
 	ath9k_hw_disable_mib_counters(ah);
 }
+EXPORT_SYMBOL(ath9k_hw_stoppcurecv);
 
 bool ath9k_hw_stopdmarecv(struct ath_hw *ah)
 {
 #define AH_RX_STOP_DMA_TIMEOUT 10000   /* usec */
 #define AH_RX_TIME_QUANTUM     100     /* usec */
-
+	struct ath_common *common = ath9k_hw_common(ah);
 	int i;
 
 	REG_WRITE(ah, AR_CR, AR_CR_RXD);
@@ -967,12 +1003,12 @@
 	}
 
 	if (i == 0) {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"DMA failed to stop in %d ms "
-			"AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
-			AH_RX_STOP_DMA_TIMEOUT / 1000,
-			REG_READ(ah, AR_CR),
-			REG_READ(ah, AR_DIAG_SW));
+		ath_print(common, ATH_DBG_FATAL,
+			  "DMA failed to stop in %d ms "
+			  "AR_CR=0x%08x AR_DIAG_SW=0x%08x\n",
+			  AH_RX_STOP_DMA_TIMEOUT / 1000,
+			  REG_READ(ah, AR_CR),
+			  REG_READ(ah, AR_DIAG_SW));
 		return false;
 	} else {
 		return true;
@@ -981,3 +1017,17 @@
 #undef AH_RX_TIME_QUANTUM
 #undef AH_RX_STOP_DMA_TIMEOUT
 }
+EXPORT_SYMBOL(ath9k_hw_stopdmarecv);
+
+int ath9k_hw_beaconq_setup(struct ath_hw *ah)
+{
+	struct ath9k_tx_queue_info qi;
+
+	memset(&qi, 0, sizeof(qi));
+	qi.tqi_aifs = 1;
+	qi.tqi_cwmin = 0;
+	qi.tqi_cwmax = 0;
+	/* NB: don't enable any interrupts */
+	return ath9k_hw_setuptxqueue(ah, ATH9K_TX_QUEUE_BEACON, &qi);
+}
+EXPORT_SYMBOL(ath9k_hw_beaconq_setup);
diff --git a/drivers/net/wireless/ath/ath9k/mac.h b/drivers/net/wireless/ath/ath9k/mac.h
index f56e77d..fefb65d 100644
--- a/drivers/net/wireless/ath/ath9k/mac.h
+++ b/drivers/net/wireless/ath/ath9k/mac.h
@@ -614,16 +614,6 @@
 	ATH9K_CIPHER_MIC = 127
 };
 
-enum ath9k_ht_macmode {
-	ATH9K_HT_MACMODE_20 = 0,
-	ATH9K_HT_MACMODE_2040 = 1,
-};
-
-enum ath9k_ht_extprotspacing {
-	ATH9K_HT_EXTPROTSPACING_20 = 0,
-	ATH9K_HT_EXTPROTSPACING_25 = 1,
-};
-
 struct ath_hw;
 struct ath9k_channel;
 struct ath_rate_table;
@@ -677,5 +667,6 @@
 void ath9k_hw_startpcureceive(struct ath_hw *ah);
 void ath9k_hw_stoppcurecv(struct ath_hw *ah);
 bool ath9k_hw_stopdmarecv(struct ath_hw *ah);
+int ath9k_hw_beaconq_setup(struct ath_hw *ah);
 
 #endif /* MAC_H */
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 52bed89..69cf702 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -16,6 +16,7 @@
 
 #include <linux/nl80211.h>
 #include "ath9k.h"
+#include "btcoex.h"
 
 static char *dev_info = "ath9k";
 
@@ -28,6 +29,10 @@
 module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444);
 MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption");
 
+static unsigned int ath9k_debug = ATH_DBG_DEFAULT;
+module_param_named(debug, ath9k_debug, uint, 0);
+MODULE_PARM_DESC(debug, "Debugging mask");
+
 /* We use the hw_value as an index into our private channel structure */
 
 #define CHAN2G(_freq, _idx)  { \
@@ -224,8 +229,9 @@
 		}
 		sband->n_bitrates++;
 
-		DPRINTF(sc, ATH_DBG_CONFIG, "Rate: %2dMbps, ratecode: %2d\n",
-			rate[i].bitrate / 10, rate[i].hw_value);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+			  "Rate: %2dMbps, ratecode: %2d\n",
+			  rate[i].bitrate / 10, rate[i].hw_value);
 	}
 }
 
@@ -242,6 +248,51 @@
 	return channel;
 }
 
+static bool ath9k_setpower(struct ath_softc *sc, enum ath9k_power_mode mode)
+{
+	unsigned long flags;
+	bool ret;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	ret = ath9k_hw_setpower(sc->sc_ah, mode);
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+
+	return ret;
+}
+
+void ath9k_ps_wakeup(struct ath_softc *sc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	if (++sc->ps_usecount != 1)
+		goto unlock;
+
+	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+
+ unlock:
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
+void ath9k_ps_restore(struct ath_softc *sc)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sc->sc_pm_lock, flags);
+	if (--sc->ps_usecount != 0)
+		goto unlock;
+
+	if (sc->ps_enabled &&
+	    !(sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
+			      SC_OP_WAIT_FOR_CAB |
+			      SC_OP_WAIT_FOR_PSPOLL_DATA |
+			      SC_OP_WAIT_FOR_TX_ACK)))
+		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_NETWORK_SLEEP);
+
+ unlock:
+	spin_unlock_irqrestore(&sc->sc_pm_lock, flags);
+}
+
 /*
  * Set/change channels.  If the channel is really being changed, it's done
  * by reseting the chip.  To accomplish this we must first cleanup any pending
@@ -251,6 +302,8 @@
 		    struct ath9k_channel *hchan)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ieee80211_conf *conf = &common->hw->conf;
 	bool fastcc = true, stopped;
 	struct ieee80211_channel *channel = hw->conf.channel;
 	int r;
@@ -280,19 +333,19 @@
 	if (!stopped || (sc->sc_flags & SC_OP_FULL_RESET))
 		fastcc = false;
 
-	DPRINTF(sc, ATH_DBG_CONFIG,
-		"(%u MHz) -> (%u MHz), chanwidth: %d\n",
-		sc->sc_ah->curchan->channel,
-		channel->center_freq, sc->tx_chan_width);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "(%u MHz) -> (%u MHz), conf_is_ht40: %d\n",
+		  sc->sc_ah->curchan->channel,
+		  channel->center_freq, conf_is_ht40(conf));
 
 	spin_lock_bh(&sc->sc_resetlock);
 
 	r = ath9k_hw_reset(ah, hchan, fastcc);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel (%u Mhz) "
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset channel (%u Mhz) "
+			  "reset status %d\n",
+			  channel->center_freq, r);
 		spin_unlock_bh(&sc->sc_resetlock);
 		goto ps_restore;
 	}
@@ -301,8 +354,8 @@
 	sc->sc_flags &= ~SC_OP_FULL_RESET;
 
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to restart recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to restart recv logic\n");
 		r = -EIO;
 		goto ps_restore;
 	}
@@ -327,6 +380,7 @@
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	bool longcal = false;
 	bool shortcal = false;
 	bool aniflag = false;
@@ -353,7 +407,7 @@
 	/* Long calibration runs independently of short calibration. */
 	if ((timestamp - sc->ani.longcal_timer) >= ATH_LONG_CALINTERVAL) {
 		longcal = true;
-		DPRINTF(sc, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
+		ath_print(common, ATH_DBG_ANI, "longcal @%lu\n", jiffies);
 		sc->ani.longcal_timer = timestamp;
 	}
 
@@ -361,7 +415,8 @@
 	if (!sc->ani.caldone) {
 		if ((timestamp - sc->ani.shortcal_timer) >= short_cal_interval) {
 			shortcal = true;
-			DPRINTF(sc, ATH_DBG_ANI, "shortcal @%lu\n", jiffies);
+			ath_print(common, ATH_DBG_ANI,
+				  "shortcal @%lu\n", jiffies);
 			sc->ani.shortcal_timer = timestamp;
 			sc->ani.resetcal_timer = timestamp;
 		}
@@ -388,16 +443,21 @@
 
 		/* Perform calibration if necessary */
 		if (longcal || shortcal) {
-			sc->ani.caldone = ath9k_hw_calibrate(ah, ah->curchan,
-						     sc->rx_chainmask, longcal);
+			sc->ani.caldone =
+				ath9k_hw_calibrate(ah,
+						   ah->curchan,
+						   common->rx_chainmask,
+						   longcal);
 
 			if (longcal)
 				sc->ani.noise_floor = ath9k_hw_getchan_noise(ah,
 								     ah->curchan);
 
-			DPRINTF(sc, ATH_DBG_ANI," calibrate chan %u/%x nf: %d\n",
-				ah->curchan->channel, ah->curchan->channelFlags,
-				sc->ani.noise_floor);
+			ath_print(common, ATH_DBG_ANI,
+				  " calibrate chan %u/%x nf: %d\n",
+				  ah->curchan->channel,
+				  ah->curchan->channelFlags,
+				  sc->ani.noise_floor);
 		}
 	}
 
@@ -439,17 +499,22 @@
  */
 void ath_update_chainmask(struct ath_softc *sc, int is_ht)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	if ((sc->sc_flags & SC_OP_SCANNING) || is_ht ||
-	    (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE)) {
-		sc->tx_chainmask = sc->sc_ah->caps.tx_chainmask;
-		sc->rx_chainmask = sc->sc_ah->caps.rx_chainmask;
+	    (ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE)) {
+		common->tx_chainmask = ah->caps.tx_chainmask;
+		common->rx_chainmask = ah->caps.rx_chainmask;
 	} else {
-		sc->tx_chainmask = 1;
-		sc->rx_chainmask = 1;
+		common->tx_chainmask = 1;
+		common->rx_chainmask = 1;
 	}
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "tx chmask: %d, rx chmask: %d\n",
-		sc->tx_chainmask, sc->rx_chainmask);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "tx chmask: %d, rx chmask: %d\n",
+		  common->tx_chainmask,
+		  common->rx_chainmask);
 }
 
 static void ath_node_attach(struct ath_softc *sc, struct ieee80211_sta *sta)
@@ -478,6 +543,9 @@
 static void ath9k_tasklet(unsigned long data)
 {
 	struct ath_softc *sc = (struct ath_softc *)data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	u32 status = sc->intrstatus;
 
 	ath9k_ps_wakeup(sc);
@@ -502,16 +570,17 @@
 		 * TSF sync does not look correct; remain awake to sync with
 		 * the next Beacon.
 		 */
-		DPRINTF(sc, ATH_DBG_PS, "TSFOOR - Sync with next Beacon\n");
+		ath_print(common, ATH_DBG_PS,
+			  "TSFOOR - Sync with next Beacon\n");
 		sc->sc_flags |= SC_OP_WAIT_FOR_BEACON | SC_OP_BEACON_SYNC;
 	}
 
-	if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
+	if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
 		if (status & ATH9K_INT_GENTIMER)
 			ath_gen_timer_isr(sc->sc_ah);
 
 	/* re-enable hardware interrupt */
-	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_hw_set_interrupts(ah, sc->imask);
 	ath9k_ps_restore(sc);
 }
 
@@ -602,7 +671,7 @@
 		if (status & ATH9K_INT_TIM_TIMER) {
 			/* Clear RxAbort bit so that we can
 			 * receive frames */
-			ath9k_hw_setpower(ah, ATH9K_PM_AWAKE);
+			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			ath9k_hw_setrxabort(sc->sc_ah, 0);
 			sc->sc_flags |= SC_OP_WAIT_FOR_BEACON;
 		}
@@ -702,8 +771,8 @@
 	memcpy(hk->kv_mic, key_txmic, sizeof(hk->kv_mic));
 	if (!ath9k_hw_set_keycache_entry(sc->sc_ah, keyix, hk, NULL)) {
 		/* TX MIC entry failed. No need to proceed further */
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Setting TX MIC Key Failed\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Setting TX MIC Key Failed\n");
 		return 0;
 	}
 
@@ -890,6 +959,7 @@
 static void setup_ht_cap(struct ath_softc *sc,
 			 struct ieee80211_sta_ht_cap *ht_info)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u8 tx_streams, rx_streams;
 
 	ht_info->ht_supported = true;
@@ -903,12 +973,15 @@
 
 	/* set up supported mcs set */
 	memset(&ht_info->mcs, 0, sizeof(ht_info->mcs));
-	tx_streams = !(sc->tx_chainmask & (sc->tx_chainmask - 1)) ? 1 : 2;
-	rx_streams = !(sc->rx_chainmask & (sc->rx_chainmask - 1)) ? 1 : 2;
+	tx_streams = !(common->tx_chainmask & (common->tx_chainmask - 1)) ?
+		     1 : 2;
+	rx_streams = !(common->rx_chainmask & (common->rx_chainmask - 1)) ?
+		     1 : 2;
 
 	if (tx_streams != rx_streams) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "TX streams %d, RX streams: %d\n",
-			tx_streams, rx_streams);
+		ath_print(common, ATH_DBG_CONFIG,
+			  "TX streams %d, RX streams: %d\n",
+			  tx_streams, rx_streams);
 		ht_info->mcs.tx_params |= IEEE80211_HT_MCS_TX_RX_DIFF;
 		ht_info->mcs.tx_params |= ((tx_streams - 1) <<
 				IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
@@ -925,14 +998,17 @@
 				 struct ieee80211_vif *vif,
 				 struct ieee80211_bss_conf *bss_conf)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	if (bss_conf->assoc) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n",
-			bss_conf->aid, sc->curbssid);
+		ath_print(common, ATH_DBG_CONFIG,
+			  "Bss Info ASSOC %d, bssid: %pM\n",
+			   bss_conf->aid, common->curbssid);
 
 		/* New association, store aid */
-		sc->curaid = bss_conf->aid;
-		ath9k_hw_write_associd(sc);
+		common->curaid = bss_conf->aid;
+		ath9k_hw_write_associd(ah);
 
 		/*
 		 * Request a re-configuration of Beacon related timers
@@ -949,8 +1025,8 @@
 
 		ath_start_ani(sc);
 	} else {
-		DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
-		sc->curaid = 0;
+		ath_print(common, ATH_DBG_CONFIG, "Bss Info DISASSOC\n");
+		common->curaid = 0;
 		/* Stop ANI */
 		del_timer_sync(&sc->ani.timer);
 	}
@@ -1042,8 +1118,8 @@
 
 	ret = led_classdev_register(wiphy_dev(sc->hw->wiphy), &led->led_cdev);
 	if (ret)
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to register led:%s", led->name);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Failed to register led:%s", led->name);
 	else
 		led->registered = 1;
 	return ret;
@@ -1127,6 +1203,7 @@
 void ath_radio_enable(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *channel = sc->hw->conf.channel;
 	int r;
 
@@ -1139,17 +1216,17 @@
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel %u (%uMhz) ",
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset channel %u (%uMhz) ",
+			  "reset status %d\n",
+			  channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath_update_txpow(sc);
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to restart recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to restart recv logic\n");
 		return;
 	}
 
@@ -1194,17 +1271,17 @@
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, ah->curchan, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset channel %u (%uMhz) "
-			"reset status %d\n",
-			channel->center_freq, r);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to reset channel %u (%uMhz) "
+			  "reset status %d\n",
+			  channel->center_freq, r);
 	}
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	ath9k_hw_phy_disable(ah);
 	ath9k_hw_configpcipowersave(ah, 1, 1);
 	ath9k_ps_restore(sc);
-	ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP);
+	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 }
 
 /*******************/
@@ -1236,23 +1313,26 @@
 		wiphy_rfkill_start_polling(sc->hw->wiphy);
 }
 
-void ath_cleanup(struct ath_softc *sc)
+static void ath9k_uninit_hw(struct ath_softc *sc)
 {
-	ath_detach(sc);
-	free_irq(sc->irq, sc);
-	ath_bus_cleanup(sc);
-	kfree(sc->sec_wiphy);
-	ieee80211_free_hw(sc->hw);
+	struct ath_hw *ah = sc->sc_ah;
+
+	BUG_ON(!ah);
+
+	ath9k_exit_debug(ah);
+	ath9k_hw_detach(ah);
+	sc->sc_ah = NULL;
 }
 
-void ath_detach(struct ath_softc *sc)
+static void ath_clean_core(struct ath_softc *sc)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	struct ath_hw *ah = sc->sc_ah;
 	int i = 0;
 
 	ath9k_ps_wakeup(sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Detach ATH hw\n");
+	dev_dbg(sc->dev, "Detach ATH hw\n");
 
 	ath_deinit_leds(sc);
 	wiphy_rfkill_stop_polling(sc->hw->wiphy);
@@ -1273,20 +1353,36 @@
 	tasklet_kill(&sc->bcon_tasklet);
 
 	if (!(sc->sc_flags & SC_OP_INVALID))
-		ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+		ath9k_setpower(sc, ATH9K_PM_AWAKE);
 
 	/* cleanup tx queues */
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	if ((sc->btcoex_info.no_stomp_timer) &&
-	    sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-		ath_gen_timer_free(sc->sc_ah, sc->btcoex_info.no_stomp_timer);
+	if ((sc->btcoex.no_stomp_timer) &&
+	    ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+		ath_gen_timer_free(ah, sc->btcoex.no_stomp_timer);
+}
 
-	ath9k_hw_detach(sc->sc_ah);
-	sc->sc_ah = NULL;
-	ath9k_exit_debug(sc);
+void ath_detach(struct ath_softc *sc)
+{
+	ath_clean_core(sc);
+	ath9k_uninit_hw(sc);
+}
+
+void ath_cleanup(struct ath_softc *sc)
+{
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
+	ath_clean_core(sc);
+	free_irq(sc->irq, sc);
+	ath_bus_cleanup(common);
+	kfree(sc->sec_wiphy);
+	ieee80211_free_hw(sc->hw);
+
+	ath9k_uninit_hw(sc);
 }
 
 static int ath9k_reg_notifier(struct wiphy *wiphy,
@@ -1295,29 +1391,245 @@
 	struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
-	struct ath_regulatory *reg = &sc->common.regulatory;
+	struct ath_regulatory *reg = ath9k_hw_regulatory(sc->sc_ah);
 
 	return ath_reg_notifier_apply(wiphy, request, reg);
 }
 
 /*
+ * Detects if there is any priority bt traffic
+ */
+static void ath_detect_bt_priority(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	if (ath9k_hw_gpio_get(sc->sc_ah, ah->btcoex_hw.btpriority_gpio))
+		btcoex->bt_priority_cnt++;
+
+	if (time_after(jiffies, btcoex->bt_priority_time +
+			msecs_to_jiffies(ATH_BT_PRIORITY_TIME_THRESHOLD))) {
+		if (btcoex->bt_priority_cnt >= ATH_BT_CNT_THRESHOLD) {
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_BTCOEX,
+				  "BT priority traffic detected");
+			sc->sc_flags |= SC_OP_BT_PRIORITY_DETECTED;
+		} else {
+			sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+		}
+
+		btcoex->bt_priority_cnt = 0;
+		btcoex->bt_priority_time = jiffies;
+	}
+}
+
+/*
+ * Configures appropriate weight based on stomp type.
+ */
+static void ath9k_btcoex_bt_stomp(struct ath_softc *sc,
+				  enum ath_stomp_type stomp_type)
+{
+	struct ath_hw *ah = sc->sc_ah;
+
+	switch (stomp_type) {
+	case ATH_BTCOEX_STOMP_ALL:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_ALL_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_LOW:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_LOW_WLAN_WGHT);
+		break;
+	case ATH_BTCOEX_STOMP_NONE:
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_NONE_WLAN_WGHT);
+		break;
+	default:
+		ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+			  "Invalid Stomptype\n");
+		break;
+	}
+
+	ath9k_hw_btcoex_enable(ah);
+}
+
+static void ath9k_gen_timer_start(struct ath_hw *ah,
+				  struct ath_gen_timer *timer,
+				  u32 timer_next,
+				  u32 timer_period)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	ath9k_hw_gen_timer_start(ah, timer, timer_next, timer_period);
+
+	if ((sc->imask & ATH9K_INT_GENTIMER) == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask |= ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+static void ath9k_gen_timer_stop(struct ath_hw *ah, struct ath_gen_timer *timer)
+{
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct ath_gen_timer_table *timer_table = &ah->hw_gen_timers;
+
+	ath9k_hw_gen_timer_stop(ah, timer);
+
+	/* if no timer is enabled, turn off interrupt mask */
+	if (timer_table->timer_mask.val == 0) {
+		ath9k_hw_set_interrupts(ah, 0);
+		sc->imask &= ~ATH9K_INT_GENTIMER;
+		ath9k_hw_set_interrupts(ah, sc->imask);
+	}
+}
+
+/*
+ * This is the master bt coex timer which runs for every
+ * 45ms, bt traffic will be given priority during 55% of this
+ * period while wlan gets remaining 45%
+ */
+static void ath_btcoex_period_timer(unsigned long data)
+{
+	struct ath_softc *sc = (struct ath_softc *) data;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_detect_bt_priority(sc);
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	ath9k_btcoex_bt_stomp(sc, btcoex->bt_stomp_type);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->btcoex_period != btcoex->btcoex_no_stomp) {
+		if (btcoex->hw_timer_enabled)
+			ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+		ath9k_gen_timer_start(ah,
+				      btcoex->no_stomp_timer,
+				      (ath9k_hw_gettsf32(ah) +
+				       btcoex->btcoex_no_stomp),
+				       btcoex->btcoex_no_stomp * 10);
+		btcoex->hw_timer_enabled = true;
+	}
+
+	mod_timer(&btcoex->period_timer, jiffies +
+				  msecs_to_jiffies(ATH_BTCOEX_DEF_BT_PERIOD));
+}
+
+/*
+ * Generic tsf based hw timer which configures weight
+ * registers to time slice between wlan and bt traffic
+ */
+static void ath_btcoex_no_stomp_timer(void *arg)
+{
+	struct ath_softc *sc = (struct ath_softc *)arg;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "no stomp timer running \n");
+
+	spin_lock_bh(&btcoex->btcoex_lock);
+
+	if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_LOW)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_NONE);
+	 else if (btcoex->bt_stomp_type == ATH_BTCOEX_STOMP_ALL)
+		ath9k_btcoex_bt_stomp(sc, ATH_BTCOEX_STOMP_LOW);
+
+	spin_unlock_bh(&btcoex->btcoex_lock);
+}
+
+static int ath_init_btcoex_timer(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+
+	btcoex->btcoex_period = ATH_BTCOEX_DEF_BT_PERIOD * 1000;
+	btcoex->btcoex_no_stomp = (100 - ATH_BTCOEX_DEF_DUTY_CYCLE) *
+		btcoex->btcoex_period / 100;
+
+	setup_timer(&btcoex->period_timer, ath_btcoex_period_timer,
+			(unsigned long) sc);
+
+	spin_lock_init(&btcoex->btcoex_lock);
+
+	btcoex->no_stomp_timer = ath_gen_timer_alloc(sc->sc_ah,
+			ath_btcoex_no_stomp_timer,
+			ath_btcoex_no_stomp_timer,
+			(void *) sc, AR_FIRST_NDP_TIMER);
+
+	if (!btcoex->no_stomp_timer)
+		return -ENOMEM;
+
+	return 0;
+}
+
+/*
+ * Read and write, they both share the same lock. We do this to serialize
+ * reads and writes on Atheros 802.11n PCI devices only. This is required
+ * as the FIFO on these devices can only accept sanely 2 requests. After
+ * that the device goes bananas. Serializing the reads/writes prevents this
+ * from happening.
+ */
+
+static void ath9k_iowrite32(void *hw_priv, u32 val, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		iowrite32(val, sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		iowrite32(val, sc->mem + reg_offset);
+}
+
+static unsigned int ath9k_ioread32(void *hw_priv, u32 reg_offset)
+{
+	struct ath_hw *ah = (struct ath_hw *) hw_priv;
+	struct ath_common *common = ath9k_hw_common(ah);
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	u32 val;
+
+	if (ah->config.serialize_regmode == SER_REG_MODE_ON) {
+		unsigned long flags;
+		spin_lock_irqsave(&sc->sc_serial_rw, flags);
+		val = ioread32(sc->mem + reg_offset);
+		spin_unlock_irqrestore(&sc->sc_serial_rw, flags);
+	} else
+		val = ioread32(sc->mem + reg_offset);
+	return val;
+}
+
+static const struct ath_ops ath9k_common_ops = {
+	.read = ath9k_ioread32,
+	.write = ath9k_iowrite32,
+};
+
+/*
  * Initialize and fill ath_softc, ath_sofct is the
  * "Software Carrier" struct. Historically it has existed
  * to allow the separation between hardware specific
  * variables (now in ath_hw) and driver specific variables.
  */
-static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid)
+static int ath_init_softc(u16 devid, struct ath_softc *sc, u16 subsysid,
+			  const struct ath_bus_ops *bus_ops)
 {
 	struct ath_hw *ah = NULL;
+	struct ath_common *common;
 	int r = 0, i;
 	int csz = 0;
+	int qnum;
 
 	/* XXX: hardware will not be ready until ath_open() being called */
 	sc->sc_flags |= SC_OP_INVALID;
 
-	if (ath9k_init_debug(sc) < 0)
-		printk(KERN_ERR "Unable to create debugfs files\n");
-
 	spin_lock_init(&sc->wiphy_lock);
 	spin_lock_init(&sc->sc_resetlock);
 	spin_lock_init(&sc->sc_serial_rw);
@@ -1328,39 +1640,50 @@
 	tasklet_init(&sc->bcon_tasklet, ath_beacon_tasklet,
 		     (unsigned long)sc);
 
-	/*
-	 * Cache line size is used to size and align various
-	 * structures used to communicate with the hardware.
-	 */
-	ath_read_cachesize(sc, &csz);
-	/* XXX assert csz is non-zero */
-	sc->common.cachelsz = csz << 2;	/* convert to bytes */
-
 	ah = kzalloc(sizeof(struct ath_hw), GFP_KERNEL);
-	if (!ah) {
-		r = -ENOMEM;
-		goto bad_no_ah;
-	}
+	if (!ah)
+		return -ENOMEM;
 
-	ah->ah_sc = sc;
 	ah->hw_version.devid = devid;
 	ah->hw_version.subsysid = subsysid;
 	sc->sc_ah = ah;
 
+	common = ath9k_hw_common(ah);
+	common->ops = &ath9k_common_ops;
+	common->bus_ops = bus_ops;
+	common->ah = ah;
+	common->hw = sc->hw;
+	common->priv = sc;
+	common->debug_mask = ath9k_debug;
+
+	/*
+	 * Cache line size is used to size and align various
+	 * structures used to communicate with the hardware.
+	 */
+	ath_read_cachesize(common, &csz);
+	/* XXX assert csz is non-zero */
+	common->cachelsz = csz << 2;	/* convert to bytes */
+
 	r = ath9k_hw_init(ah);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to initialize hardware; "
-			"initialization status: %d\n", r);
-		goto bad;
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to initialize hardware; "
+			  "initialization status: %d\n", r);
+		goto bad_free_hw;
+	}
+
+	if (ath9k_init_debug(ah) < 0) {
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to create debugfs files\n");
+		goto bad_free_hw;
 	}
 
 	/* Get the hardware key cache size. */
 	sc->keymax = ah->caps.keycache_size;
 	if (sc->keymax > ATH_KEYMAX) {
-		DPRINTF(sc, ATH_DBG_ANY,
-			"Warning, using only %u entries in %u key cache\n",
-			ATH_KEYMAX, sc->keymax);
+		ath_print(common, ATH_DBG_ANY,
+			  "Warning, using only %u entries in %u key cache\n",
+			  ATH_KEYMAX, sc->keymax);
 		sc->keymax = ATH_KEYMAX;
 	}
 
@@ -1386,17 +1709,17 @@
 	 * priority.  Note that the hal handles reseting
 	 * these queues at the needed time.
 	 */
-	sc->beacon.beaconq = ath_beaconq_setup(ah);
+	sc->beacon.beaconq = ath9k_hw_beaconq_setup(ah);
 	if (sc->beacon.beaconq == -1) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup a beacon xmit queue\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup a beacon xmit queue\n");
 		r = -EIO;
 		goto bad2;
 	}
 	sc->beacon.cabq = ath_txq_setup(sc, ATH9K_TX_QUEUE_CAB, 0);
 	if (sc->beacon.cabq == NULL) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup CAB xmit queue\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup CAB xmit queue\n");
 		r = -EIO;
 		goto bad2;
 	}
@@ -1410,27 +1733,27 @@
 	/* Setup data queues */
 	/* NB: ensure BK queue is the lowest priority h/w queue */
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BK)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for BK traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BK traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_BE)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for BE traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for BE traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VI)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for VI traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VI traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
 	if (!ath_tx_setup(sc, ATH9K_WME_AC_VO)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to setup xmit queue for VO traffic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to setup xmit queue for VO traffic\n");
 		r = -EIO;
 		goto bad2;
 	}
@@ -1480,14 +1803,14 @@
 		sc->sc_flags |= SC_OP_RXAGGR;
 	}
 
-	sc->tx_chainmask = ah->caps.tx_chainmask;
-	sc->rx_chainmask = ah->caps.rx_chainmask;
+	common->tx_chainmask = ah->caps.tx_chainmask;
+	common->rx_chainmask = ah->caps.rx_chainmask;
 
 	ath9k_hw_setcapability(ah, ATH9K_CAP_DIVERSITY, 1, true, NULL);
 	sc->rx.defant = ath9k_hw_getdefantenna(ah);
 
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		memcpy(sc->bssidmask, ath_bcast_mac, ETH_ALEN);
+		memcpy(common->bssidmask, ath_bcast_mac, ETH_ALEN);
 
 	sc->beacon.slottime = ATH9K_SLOT_TIME_9;	/* default to short slot time */
 
@@ -1515,10 +1838,24 @@
 			ARRAY_SIZE(ath9k_5ghz_chantable);
 	}
 
-	if (sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) {
-		r = ath9k_hw_btcoex_init(ah);
+	switch (ah->btcoex_hw.scheme) {
+	case ATH_BTCOEX_CFG_NONE:
+		break;
+	case ATH_BTCOEX_CFG_2WIRE:
+		ath9k_hw_btcoex_init_2wire(ah);
+		break;
+	case ATH_BTCOEX_CFG_3WIRE:
+		ath9k_hw_btcoex_init_3wire(ah);
+		r = ath_init_btcoex_timer(sc);
 		if (r)
 			goto bad2;
+		qnum = ath_tx_get_qnum(sc, ATH9K_TX_QUEUE_DATA, ATH9K_WME_AC_BE);
+		ath9k_hw_init_btcoex_hw(ah, qnum);
+		sc->btcoex.bt_stomp_type = ATH_BTCOEX_STOMP_LOW;
+		break;
+	default:
+		WARN_ON(1);
+		break;
 	}
 
 	return 0;
@@ -1527,12 +1864,9 @@
 	for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++)
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
-bad:
-	ath9k_hw_detach(ah);
-	sc->sc_ah = NULL;
-bad_no_ah:
-	ath9k_exit_debug(sc);
 
+bad_free_hw:
+	ath9k_uninit_hw(sc);
 	return r;
 }
 
@@ -1574,34 +1908,40 @@
 }
 
 /* Device driver core initialization */
-int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid)
+int ath_init_device(u16 devid, struct ath_softc *sc, u16 subsysid,
+		    const struct ath_bus_ops *bus_ops)
 {
 	struct ieee80211_hw *hw = sc->hw;
+	struct ath_common *common;
+	struct ath_hw *ah;
 	int error = 0, i;
 	struct ath_regulatory *reg;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
+	dev_dbg(sc->dev, "Attach ATH hw\n");
 
-	error = ath_init_softc(devid, sc, subsysid);
+	error = ath_init_softc(devid, sc, subsysid, bus_ops);
 	if (error != 0)
 		return error;
 
+	ah = sc->sc_ah;
+	common = ath9k_hw_common(ah);
+
 	/* get mac address from hardware and set in mac80211 */
 
-	SET_IEEE80211_PERM_ADDR(hw, sc->sc_ah->macaddr);
+	SET_IEEE80211_PERM_ADDR(hw, common->macaddr);
 
 	ath_set_hw_capab(sc, hw);
 
-	error = ath_regd_init(&sc->common.regulatory, sc->hw->wiphy,
+	error = ath_regd_init(&common->regulatory, sc->hw->wiphy,
 			      ath9k_reg_notifier);
 	if (error)
 		return error;
 
-	reg = &sc->common.regulatory;
+	reg = &common->regulatory;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT) {
 		setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_2GHZ].ht_cap);
-		if (test_bit(ATH9K_MODE_11A, sc->sc_ah->caps.wireless_modes))
+		if (test_bit(ATH9K_MODE_11A, ah->caps.wireless_modes))
 			setup_ht_cap(sc, &sc->sbands[IEEE80211_BAND_5GHZ].ht_cap);
 	}
 
@@ -1639,9 +1979,7 @@
 		if (ATH_TXQ_SETUP(sc, i))
 			ath_tx_cleanupq(sc, &sc->tx.txq[i]);
 
-	ath9k_hw_detach(sc->sc_ah);
-	sc->sc_ah = NULL;
-	ath9k_exit_debug(sc);
+	ath9k_uninit_hw(sc);
 
 	return error;
 }
@@ -1649,6 +1987,7 @@
 int ath_reset(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hw *hw = sc->hw;
 	int r;
 
@@ -1660,12 +1999,13 @@
 	spin_lock_bh(&sc->sc_resetlock);
 	r = ath9k_hw_reset(ah, sc->sc_ah->curchan, false);
 	if (r)
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %d\n", r);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset hardware; reset status %d\n", r);
 	spin_unlock_bh(&sc->sc_resetlock);
 
 	if (ath_startrecv(sc) != 0)
-		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to start recv logic\n");
 
 	/*
 	 * We may be doing a reset in response to a request
@@ -1708,19 +2048,20 @@
 	((_dd)->dd_desc_paddr + ((caddr_t)(_ds) - (caddr_t)(_dd)->dd_desc))
 #define ATH_DESC_4KB_BOUND_CHECK(_daddr) ((((_daddr) & 0xFFF) > 0xF7F) ? 1 : 0)
 #define ATH_DESC_4KB_BOUND_NUM_SKIPPED(_len) ((_len) / 4096)
-
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_desc *ds;
 	struct ath_buf *bf;
 	int i, bsize, error;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
-		name, nbuf, ndesc);
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA: %u buffers %u desc/buf\n",
+		  name, nbuf, ndesc);
 
 	INIT_LIST_HEAD(head);
 	/* ath_desc must be a multiple of DWORDs */
 	if ((sizeof(struct ath_desc) % 4) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL, "ath_desc not DWORD aligned\n");
-		ASSERT((sizeof(struct ath_desc) % 4) == 0);
+		ath_print(common, ATH_DBG_FATAL,
+			  "ath_desc not DWORD aligned\n");
+		BUG_ON((sizeof(struct ath_desc) % 4) != 0);
 		error = -ENOMEM;
 		goto fail;
 	}
@@ -1753,9 +2094,9 @@
 		goto fail;
 	}
 	ds = dd->dd_desc;
-	DPRINTF(sc, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
-		name, ds, (u32) dd->dd_desc_len,
-		ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
+	ath_print(common, ATH_DBG_CONFIG, "%s DMA map: %p (%u) -> %llx (%u)\n",
+		  name, ds, (u32) dd->dd_desc_len,
+		  ito64(dd->dd_desc_paddr), /*XXX*/(u32) dd->dd_desc_len);
 
 	/* allocate buffers */
 	bsize = sizeof(struct ath_buf) * nbuf;
@@ -1778,7 +2119,7 @@
 			 * descriptor fetch.
 			 */
 			while (ATH_DESC_4KB_BOUND_CHECK(bf->bf_daddr)) {
-				ASSERT((caddr_t) bf->bf_desc <
+				BUG_ON((caddr_t) bf->bf_desc >=
 				       ((caddr_t) dd->dd_desc +
 					dd->dd_desc_len));
 
@@ -1882,31 +2223,50 @@
 		ichan->channelFlags = CHANNEL_5GHZ | CHANNEL_OFDM;
 	}
 
-	sc->tx_chan_width = ATH9K_HT_MACMODE_20;
-
-	if (conf_is_ht(conf)) {
-		if (conf_is_ht40(conf))
-			sc->tx_chan_width = ATH9K_HT_MACMODE_2040;
-
+	if (conf_is_ht(conf))
 		ichan->chanmode = ath_get_extchanmode(sc, chan,
 					    conf->channel_type);
-	}
 }
 
 /**********************/
 /* mac80211 callbacks */
 /**********************/
 
+/*
+ * (Re)start btcoex timers
+ */
+static void ath9k_btcoex_timer_resume(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	ath_print(ath9k_hw_common(ah), ATH_DBG_BTCOEX,
+		  "Starting btcoex timers");
+
+	/* make sure duty cycle timer is also stopped when resuming */
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer);
+
+	btcoex->bt_priority_cnt = 0;
+	btcoex->bt_priority_time = jiffies;
+	sc->sc_flags &= ~SC_OP_BT_PRIORITY_DETECTED;
+
+	mod_timer(&btcoex->period_timer, jiffies);
+}
+
 static int ath9k_start(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_channel *curchan = hw->conf.channel;
 	struct ath9k_channel *init_channel;
 	int r;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Starting driver with "
-		"initial channel: %d MHz\n", curchan->center_freq);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Starting driver with initial channel: %d MHz\n",
+		  curchan->center_freq);
 
 	mutex_lock(&sc->mutex);
 
@@ -1938,7 +2298,7 @@
 	init_channel = ath_get_curchannel(sc, hw);
 
 	/* Reset SERDES registers */
-	ath9k_hw_configpcipowersave(sc->sc_ah, 0, 0);
+	ath9k_hw_configpcipowersave(ah, 0, 0);
 
 	/*
 	 * The basic interface to setting the hardware in a good
@@ -1948,12 +2308,12 @@
 	 * and then setup of the interrupt mask.
 	 */
 	spin_lock_bh(&sc->sc_resetlock);
-	r = ath9k_hw_reset(sc->sc_ah, init_channel, false);
+	r = ath9k_hw_reset(ah, init_channel, false);
 	if (r) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to reset hardware; reset status %d "
-			"(freq %u MHz)\n", r,
-			curchan->center_freq);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to reset hardware; reset status %d "
+			  "(freq %u MHz)\n", r,
+			  curchan->center_freq);
 		spin_unlock_bh(&sc->sc_resetlock);
 		goto mutex_unlock;
 	}
@@ -1973,7 +2333,8 @@
 	 * here except setup the interrupt mask.
 	 */
 	if (ath_startrecv(sc) != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL, "Unable to start recv logic\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Unable to start recv logic\n");
 		r = -EIO;
 		goto mutex_unlock;
 	}
@@ -1983,10 +2344,10 @@
 		| ATH9K_INT_RXEOL | ATH9K_INT_RXORN
 		| ATH9K_INT_FATAL | ATH9K_INT_GLOBAL;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_GTT)
 		sc->imask |= ATH9K_INT_GTT;
 
-	if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT)
+	if (ah->caps.hw_caps & ATH9K_HW_CAP_HT)
 		sc->imask |= ATH9K_INT_CST;
 
 	ath_cache_conf_rate(sc, &hw->conf);
@@ -1995,21 +2356,22 @@
 
 	/* Disable BMISS interrupt when we're not associated */
 	sc->imask &= ~(ATH9K_INT_SWBA | ATH9K_INT_BMISS);
-	ath9k_hw_set_interrupts(sc->sc_ah, sc->imask);
+	ath9k_hw_set_interrupts(ah, sc->imask);
 
 	ieee80211_wake_queues(hw);
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0);
 
-	if ((sc->btcoex_info.btcoex_scheme != ATH_BTCOEX_CFG_NONE) &&
-	    !(sc->sc_flags & SC_OP_BTCOEX_ENABLED)) {
-		ath_btcoex_set_weight(&sc->btcoex_info, AR_BT_COEX_WGHT,
-				      AR_STOMP_LOW_WLAN_WGHT);
-		ath9k_hw_btcoex_enable(sc->sc_ah);
+	if ((ah->btcoex_hw.scheme != ATH_BTCOEX_CFG_NONE) &&
+	    !ah->btcoex_hw.enabled) {
+		ath9k_hw_btcoex_set_weight(ah, AR_BT_COEX_WGHT,
+					   AR_STOMP_LOW_WLAN_WGHT);
+		ath9k_hw_btcoex_enable(ah);
 
-		ath_pcie_aspm_disable(sc);
-		if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-			ath_btcoex_timer_resume(sc, &sc->btcoex_info);
+		if (common->bus_ops->bt_coex_prep)
+			common->bus_ops->bt_coex_prep(common);
+		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+			ath9k_btcoex_timer_resume(sc);
 	}
 
 mutex_unlock:
@@ -2024,12 +2386,14 @@
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_tx_control txctl;
 	int hdrlen, padsize;
 
 	if (aphy->state != ATH_WIPHY_ACTIVE && aphy->state != ATH_WIPHY_SCAN) {
-		printk(KERN_DEBUG "ath9k: %s: TX in unexpected wiphy state "
-		       "%d\n", wiphy_name(hw->wiphy), aphy->state);
+		ath_print(common, ATH_DBG_XMIT,
+			  "ath9k: %s: TX in unexpected wiphy state "
+			  "%d\n", wiphy_name(hw->wiphy), aphy->state);
 		goto exit;
 	}
 
@@ -2042,8 +2406,8 @@
 		if (ieee80211_is_data(hdr->frame_control) &&
 		    !ieee80211_is_nullfunc(hdr->frame_control) &&
 		    !ieee80211_has_pm(hdr->frame_control)) {
-			DPRINTF(sc, ATH_DBG_PS, "Add PM=1 for a TX frame "
-				"while in PS mode\n");
+			ath_print(common, ATH_DBG_PS, "Add PM=1 for a TX frame "
+				  "while in PS mode\n");
 			hdr->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
 		}
 	}
@@ -2058,11 +2422,12 @@
 		ath9k_ps_wakeup(sc);
 		ath9k_hw_setrxabort(sc->sc_ah, 0);
 		if (ieee80211_is_pspoll(hdr->frame_control)) {
-			DPRINTF(sc, ATH_DBG_PS, "Sending PS-Poll to pick a "
-				"buffered frame\n");
+			ath_print(common, ATH_DBG_PS,
+				  "Sending PS-Poll to pick a buffered frame\n");
 			sc->sc_flags |= SC_OP_WAIT_FOR_PSPOLL_DATA;
 		} else {
-			DPRINTF(sc, ATH_DBG_PS, "Wake up to complete TX\n");
+			ath_print(common, ATH_DBG_PS,
+				  "Wake up to complete TX\n");
 			sc->sc_flags |= SC_OP_WAIT_FOR_TX_ACK;
 		}
 		/*
@@ -2104,10 +2469,10 @@
 	if (!txctl.txq)
 		goto exit;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT, "transmitting packet, skb: %p\n", skb);
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		DPRINTF(sc, ATH_DBG_XMIT, "TX failed\n");
+		ath_print(common, ATH_DBG_XMIT, "TX failed\n");
 		goto exit;
 	}
 
@@ -2117,10 +2482,28 @@
 	return 0;
 }
 
+/*
+ * Pause btcoex timer and bt duty cycle timer
+ */
+static void ath9k_btcoex_timer_pause(struct ath_softc *sc)
+{
+	struct ath_btcoex *btcoex = &sc->btcoex;
+	struct ath_hw *ah = sc->sc_ah;
+
+	del_timer_sync(&btcoex->period_timer);
+
+	if (btcoex->hw_timer_enabled)
+		ath9k_gen_timer_stop(ah, btcoex->no_stomp_timer);
+
+	btcoex->hw_timer_enabled = false;
+}
+
 static void ath9k_stop(struct ieee80211_hw *hw)
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 
 	mutex_lock(&sc->mutex);
 
@@ -2135,7 +2518,7 @@
 	}
 
 	if (sc->sc_flags & SC_OP_INVALID) {
-		DPRINTF(sc, ATH_DBG_ANY, "Device not present\n");
+		ath_print(common, ATH_DBG_ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
 		return;
 	}
@@ -2145,33 +2528,33 @@
 		return; /* another wiphy still in use */
 	}
 
-	if (sc->sc_flags & SC_OP_BTCOEX_ENABLED) {
-		ath9k_hw_btcoex_disable(sc->sc_ah);
-		if (sc->btcoex_info.btcoex_scheme == ATH_BTCOEX_CFG_3WIRE)
-			ath_btcoex_timer_pause(sc, &sc->btcoex_info);
+	if (ah->btcoex_hw.enabled) {
+		ath9k_hw_btcoex_disable(ah);
+		if (ah->btcoex_hw.scheme == ATH_BTCOEX_CFG_3WIRE)
+			ath9k_btcoex_timer_pause(sc);
 	}
 
 	/* make sure h/w will not generate any interrupt
 	 * before setting the invalid flag. */
-	ath9k_hw_set_interrupts(sc->sc_ah, 0);
+	ath9k_hw_set_interrupts(ah, 0);
 
 	if (!(sc->sc_flags & SC_OP_INVALID)) {
 		ath_drain_all_txq(sc, false);
 		ath_stoprecv(sc);
-		ath9k_hw_phy_disable(sc->sc_ah);
+		ath9k_hw_phy_disable(ah);
 	} else
 		sc->rx.rxlink = NULL;
 
 	/* disable HAL and put h/w to sleep */
-	ath9k_hw_disable(sc->sc_ah);
-	ath9k_hw_configpcipowersave(sc->sc_ah, 1, 1);
-	ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_FULL_SLEEP);
+	ath9k_hw_disable(ah);
+	ath9k_hw_configpcipowersave(ah, 1, 1);
+	ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
 
 	sc->sc_flags |= SC_OP_INVALID;
 
 	mutex_unlock(&sc->mutex);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Driver halt\n");
+	ath_print(common, ATH_DBG_CONFIG, "Driver halt\n");
 }
 
 static int ath9k_add_interface(struct ieee80211_hw *hw,
@@ -2179,6 +2562,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)conf->vif->drv_priv;
 	enum nl80211_iftype ic_opmode = NL80211_IFTYPE_UNSPECIFIED;
 	int ret = 0;
@@ -2205,13 +2589,14 @@
 		ic_opmode = conf->type;
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_FATAL,
+		ath_print(common, ATH_DBG_FATAL,
 			"Interface type %d not yet supported\n", conf->type);
 		ret = -EOPNOTSUPP;
 		goto out;
 	}
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Attach a VIF of type: %d\n", ic_opmode);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Attach a VIF of type: %d\n", ic_opmode);
 
 	/* Set the VIF opmode */
 	avp->av_opmode = ic_opmode;
@@ -2261,10 +2646,11 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_vif *avp = (void *)conf->vif->drv_priv;
 	int i;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Detach Interface\n");
+	ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
 
 	mutex_lock(&sc->mutex);
 
@@ -2299,6 +2685,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ieee80211_conf *conf = &hw->conf;
 	struct ath_hw *ah = sc->sc_ah;
 	bool all_wiphys_idle = false, disable_radio = false;
@@ -2318,8 +2705,8 @@
 		}
 		else if (all_wiphys_idle) {
 			ath_radio_enable(sc);
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"not-idle: enabling radio\n");
+			ath_print(common, ATH_DBG_CONFIG,
+				  "not-idle: enabling radio\n");
 		}
 	}
 
@@ -2337,7 +2724,7 @@
 			sc->ps_enabled = true;
 		} else {
 			sc->ps_enabled = false;
-			ath9k_hw_setpower(sc->sc_ah, ATH9K_PM_AWAKE);
+			ath9k_setpower(sc, ATH9K_PM_AWAKE);
 			if (!(ah->caps.hw_caps &
 			      ATH9K_HW_CAP_AUTOSLEEP)) {
 				ath9k_hw_setrxabort(sc->sc_ah, 0);
@@ -2372,8 +2759,8 @@
 			goto skip_chan_change;
 		}
 
-		DPRINTF(sc, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
-			curchan->center_freq);
+		ath_print(common, ATH_DBG_CONFIG, "Set channel: %d MHz\n",
+			  curchan->center_freq);
 
 		/* XXX: remove me eventualy */
 		ath9k_update_ichannel(sc, hw, &sc->sc_ah->channels[pos]);
@@ -2381,7 +2768,8 @@
 		ath_update_chainmask(sc, conf_is_ht(conf));
 
 		if (ath_set_channel(sc, hw, &sc->sc_ah->channels[pos]) < 0) {
-			DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Unable to set channel\n");
 			mutex_unlock(&sc->mutex);
 			return -EINVAL;
 		}
@@ -2392,7 +2780,7 @@
 		sc->config.txpowlimit = 2 * conf->power_level;
 
 	if (disable_radio) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "idle: disabling radio\n");
+		ath_print(common, ATH_DBG_CONFIG, "idle: disabling radio\n");
 		ath_radio_disable(sc);
 	}
 
@@ -2429,7 +2817,8 @@
 	ath9k_hw_setrxfilter(sc->sc_ah, rfilt);
 	ath9k_ps_restore(sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW RX filter: 0x%x\n", rfilt);
+	ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+		  "Set HW RX filter: 0x%x\n", rfilt);
 }
 
 static void ath9k_sta_notify(struct ieee80211_hw *hw,
@@ -2457,6 +2846,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_tx_queue_info qi;
 	int ret = 0, qnum;
 
@@ -2473,15 +2863,15 @@
 	qi.tqi_burstTime = params->txop;
 	qnum = ath_get_hal_qnum(queue, sc);
 
-	DPRINTF(sc, ATH_DBG_CONFIG,
-		"Configure tx [queue/halq] [%d/%d],  "
-		"aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
-		queue, qnum, params->aifs, params->cw_min,
-		params->cw_max, params->txop);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Configure tx [queue/halq] [%d/%d],  "
+		  "aifs: %d, cw_min: %d, cw_max: %d, txop: %d\n",
+		  queue, qnum, params->aifs, params->cw_min,
+		  params->cw_max, params->txop);
 
 	ret = ath_txq_update(sc, qnum, &qi);
 	if (ret)
-		DPRINTF(sc, ATH_DBG_FATAL, "TXQ Update failed\n");
+		ath_print(common, ATH_DBG_FATAL, "TXQ Update failed\n");
 
 	mutex_unlock(&sc->mutex);
 
@@ -2496,6 +2886,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int ret = 0;
 
 	if (modparam_nohwcrypt)
@@ -2503,7 +2894,7 @@
 
 	mutex_lock(&sc->mutex);
 	ath9k_ps_wakeup(sc);
-	DPRINTF(sc, ATH_DBG_CONFIG, "Set HW Key\n");
+	ath_print(common, ATH_DBG_CONFIG, "Set HW Key\n");
 
 	switch (cmd) {
 	case SET_KEY:
@@ -2540,6 +2931,7 @@
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_vif *avp = (void *)vif->drv_priv;
 	u32 rfilt = 0;
 	int error, i;
@@ -2555,9 +2947,9 @@
 	    ah->opmode != NL80211_IFTYPE_AP) {
 		ah->opmode = NL80211_IFTYPE_STATION;
 		ath9k_hw_setopmode(ah);
-		memcpy(sc->curbssid, sc->sc_ah->macaddr, ETH_ALEN);
-		sc->curaid = 0;
-		ath9k_hw_write_associd(sc);
+		memcpy(common->curbssid, common->macaddr, ETH_ALEN);
+		common->curaid = 0;
+		ath9k_hw_write_associd(ah);
 		/* Request full reset to get hw opmode changed properly */
 		sc->sc_flags |= SC_OP_FULL_RESET;
 	}
@@ -2569,17 +2961,17 @@
 		case NL80211_IFTYPE_ADHOC:
 		case NL80211_IFTYPE_MESH_POINT:
 			/* Set BSSID */
-			memcpy(sc->curbssid, bss_conf->bssid, ETH_ALEN);
+			memcpy(common->curbssid, bss_conf->bssid, ETH_ALEN);
 			memcpy(avp->bssid, bss_conf->bssid, ETH_ALEN);
-			sc->curaid = 0;
-			ath9k_hw_write_associd(sc);
+			common->curaid = 0;
+			ath9k_hw_write_associd(ah);
 
 			/* Set aggregation protection mode parameters */
 			sc->config.ath_aggr_prot = 0;
 
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"RX filter 0x%x bssid %pM aid 0x%x\n",
-				rfilt, sc->curbssid, sc->curaid);
+			ath_print(common, ATH_DBG_CONFIG,
+				  "RX filter 0x%x bssid %pM aid 0x%x\n",
+				  rfilt, common->curbssid, common->curaid);
 
 			/* need to reconfigure the beacon */
 			sc->sc_flags &= ~SC_OP_BEACONS ;
@@ -2618,7 +3010,7 @@
 			if (ath9k_hw_keyisvalid(sc->sc_ah, (u16)i))
 				ath9k_hw_keysetmac(sc->sc_ah,
 						   (u16)i,
-						   sc->curbssid);
+						   common->curbssid);
 	}
 
 	/* Only legacy IBSS for now */
@@ -2626,8 +3018,8 @@
 		ath_update_chainmask(sc, 0);
 
 	if (changed & BSS_CHANGED_ERP_PREAMBLE) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
-			bss_conf->use_short_preamble);
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed PREAMBLE %d\n",
+			  bss_conf->use_short_preamble);
 		if (bss_conf->use_short_preamble)
 			sc->sc_flags |= SC_OP_PREAMBLE_SHORT;
 		else
@@ -2635,8 +3027,8 @@
 	}
 
 	if (changed & BSS_CHANGED_ERP_CTS_PROT) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
-			bss_conf->use_cts_prot);
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed CTS PROT %d\n",
+			  bss_conf->use_cts_prot);
 		if (bss_conf->use_cts_prot &&
 		    hw->conf.channel->band != IEEE80211_BAND_5GHZ)
 			sc->sc_flags |= SC_OP_PROTECT_ENABLE;
@@ -2645,7 +3037,7 @@
 	}
 
 	if (changed & BSS_CHANGED_ASSOC) {
-		DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
+		ath_print(common, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n",
 			bss_conf->assoc);
 		ath9k_bss_assoc_info(sc, vif, bss_conf);
 	}
@@ -2694,7 +3086,11 @@
 	struct ath_softc *sc = aphy->sc;
 
 	mutex_lock(&sc->mutex);
+
+	ath9k_ps_wakeup(sc);
 	ath9k_hw_reset_tsf(sc->sc_ah);
+	ath9k_ps_restore(sc);
+
 	mutex_unlock(&sc->mutex);
 }
 
@@ -2726,7 +3122,8 @@
 		ath_tx_aggr_resume(sc, sta, tid);
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_FATAL, "Unknown AMPDU action\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unknown AMPDU action\n");
 	}
 
 	return ret;
diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c
index 903dd8a..63059b6 100644
--- a/drivers/net/wireless/ath/ath9k/pci.c
+++ b/drivers/net/wireless/ath/ath9k/pci.c
@@ -31,8 +31,9 @@
 };
 
 /* return bus cachesize in 4B word units */
-static void ath_pci_read_cachesize(struct ath_softc *sc, int *csz)
+static void ath_pci_read_cachesize(struct ath_common *common, int *csz)
 {
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 	u8 u8tmp;
 
 	pci_read_config_byte(to_pci_dev(sc->dev), PCI_CACHE_LINE_SIZE, &u8tmp);
@@ -48,8 +49,9 @@
 		*csz = DEFAULT_CACHELINE >> 2;   /* Use the default size */
 }
 
-static void ath_pci_cleanup(struct ath_softc *sc)
+static void ath_pci_cleanup(struct ath_common *common)
 {
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
 	struct pci_dev *pdev = to_pci_dev(sc->dev);
 
 	pci_iounmap(pdev, sc->mem);
@@ -57,9 +59,11 @@
 	pci_release_region(pdev, 0);
 }
 
-static bool ath_pci_eeprom_read(struct ath_hw *ah, u32 off, u16 *data)
+static bool ath_pci_eeprom_read(struct ath_common *common, u32 off, u16 *data)
 {
-	(void)REG_READ(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
+	struct ath_hw *ah = (struct ath_hw *) common->ah;
+
+	common->ops->read(ah, AR5416_EEPROM_OFFSET + (off << AR5416_EEPROM_S));
 
 	if (!ath9k_hw_wait(ah,
 			   AR_EEPROM_STATUS_DATA,
@@ -69,16 +73,34 @@
 		return false;
 	}
 
-	*data = MS(REG_READ(ah, AR_EEPROM_STATUS_DATA),
+	*data = MS(common->ops->read(ah, AR_EEPROM_STATUS_DATA),
 		   AR_EEPROM_STATUS_DATA_VAL);
 
 	return true;
 }
 
-static struct ath_bus_ops ath_pci_bus_ops = {
+/*
+ * Bluetooth coexistance requires disabling ASPM.
+ */
+static void ath_pci_bt_coex_prep(struct ath_common *common)
+{
+	struct ath_softc *sc = (struct ath_softc *) common->priv;
+	struct pci_dev *pdev = to_pci_dev(sc->dev);
+	u8 aspm;
+
+	if (!pdev->is_pcie)
+		return;
+
+	pci_read_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, &aspm);
+	aspm &= ~(ATH_PCIE_CAP_LINK_L0S | ATH_PCIE_CAP_LINK_L1);
+	pci_write_config_byte(pdev, ATH_PCIE_CAP_LINK_CTRL, aspm);
+}
+
+const static struct ath_bus_ops ath_pci_bus_ops = {
 	.read_cachesize = ath_pci_read_cachesize,
 	.cleanup = ath_pci_cleanup,
 	.eeprom_read = ath_pci_eeprom_read,
+	.bt_coex_prep = ath_pci_bt_coex_prep,
 };
 
 static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
@@ -177,10 +199,9 @@
 	sc->hw = hw;
 	sc->dev = &pdev->dev;
 	sc->mem = mem;
-	sc->bus_ops = &ath_pci_bus_ops;
 
 	pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsysid);
-	ret = ath_init_device(id->device, sc, subsysid);
+	ret = ath_init_device(id->device, sc, subsysid, &ath_pci_bus_ops);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to initialize device\n");
 		goto bad3;
diff --git a/drivers/net/wireless/ath/ath9k/phy.c b/drivers/net/wireless/ath/ath9k/phy.c
index 63bf9a3..72a17c4 100644
--- a/drivers/net/wireless/ath/ath9k/phy.c
+++ b/drivers/net/wireless/ath/ath9k/phy.c
@@ -14,7 +14,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include "ath9k.h"
+#include "hw.h"
 
 void
 ath9k_hw_write_regs(struct ath_hw *ah, u32 modesIndex, u32 freqIndex,
@@ -26,6 +26,7 @@
 bool
 ath9k_hw_set_channel(struct ath_hw *ah, struct ath9k_channel *chan)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
 	u32 channelSel = 0;
 	u32 bModeSynth = 0;
 	u32 aModeRefSel = 0;
@@ -46,8 +47,8 @@
 			channelSel = ((freq - 704) * 2 - 3040) / 10;
 			bModeSynth = 1;
 		} else {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Invalid channel %u MHz\n", freq);
+			ath_print(common, ATH_DBG_FATAL,
+				  "Invalid channel %u MHz\n", freq);
 			return false;
 		}
 
@@ -79,8 +80,8 @@
 		channelSel = ath9k_hw_reverse_bits((freq - 4800) / 5, 8);
 		aModeRefSel = ath9k_hw_reverse_bits(1, 2);
 	} else {
-		DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-			"Invalid channel %u MHz\n", freq);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Invalid channel %u MHz\n", freq);
 		return false;
 	}
 
@@ -112,20 +113,31 @@
 
 	if (freq < 4800) {
 		u32 txctl;
+		int regWrites = 0;
 
 		bMode = 1;
 		fracMode = 1;
 		aModeRefSel = 0;
 		channelSel = (freq * 0x10000) / 15;
 
-		txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
-		if (freq == 2484) {
-
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+		if (AR_SREV_9287_11_OR_LATER(ah)) {
+			if (freq == 2484) {
+				REG_WRITE_ARRAY(&ah->iniCckfirJapan2484,
+						1, regWrites);
+			} else {
+				REG_WRITE_ARRAY(&ah->iniCckfirNormal,
+						1, regWrites);
+			}
 		} else {
-			REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
-				  txctl & ~AR_PHY_CCK_TX_CTRL_JAPAN);
+			txctl = REG_READ(ah, AR_PHY_CCK_TX_CTRL);
+			if (freq == 2484) {
+				/* Enable channel spreading for channel 14 */
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl | AR_PHY_CCK_TX_CTRL_JAPAN);
+			} else {
+				REG_WRITE(ah, AR_PHY_CCK_TX_CTRL,
+					  txctl &~ AR_PHY_CCK_TX_CTRL_JAPAN);
+			}
 		}
 	} else {
 		bMode = 0;
@@ -285,6 +297,8 @@
 
 bool ath9k_hw_init_rf(struct ath_hw *ah, int *status)
 {
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	if (!AR_SREV_9280_10_OR_LATER(ah)) {
 		ah->analogBank0Data =
 		    kzalloc((sizeof(u32) *
@@ -315,8 +329,8 @@
 		    || ah->analogBank6Data == NULL
 		    || ah->analogBank6TPCData == NULL
 		    || ah->analogBank7Data == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate RF banks\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Cannot allocate RF banks\n");
 			*status = -ENOMEM;
 			return false;
 		}
@@ -326,8 +340,8 @@
 			     ah->iniAddac.ia_rows *
 			     ah->iniAddac.ia_columns), GFP_KERNEL);
 		if (ah->addac5416_21 == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate addac5416_21\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Cannot allocate addac5416_21\n");
 			*status = -ENOMEM;
 			return false;
 		}
@@ -336,8 +350,8 @@
 		    kzalloc((sizeof(u32) *
 			     ah->iniBank6.ia_rows), GFP_KERNEL);
 		if (ah->bank6Temp == NULL) {
-			DPRINTF(ah->ah_sc, ATH_DBG_FATAL,
-				"Cannot allocate bank6Temp\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "Cannot allocate bank6Temp\n");
 			*status = -ENOMEM;
 			return false;
 		}
diff --git a/drivers/net/wireless/ath/ath9k/phy.h b/drivers/net/wireless/ath/ath9k/phy.h
index dfda6f4..140fef7 100644
--- a/drivers/net/wireless/ath/ath9k/phy.h
+++ b/drivers/net/wireless/ath/ath9k/phy.h
@@ -45,6 +45,7 @@
 #define AR_PHY_FC_DYN2040_EN        0x00000004
 #define AR_PHY_FC_DYN2040_PRI_ONLY  0x00000008
 #define AR_PHY_FC_DYN2040_PRI_CH    0x00000010
+/* For 25 MHz channel spacing -- not used but supported by hw */
 #define AR_PHY_FC_DYN2040_EXT_CH    0x00000020
 #define AR_PHY_FC_HT_EN             0x00000040
 #define AR_PHY_FC_SHORT_GI_40       0x00000080
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1895d63..bb72b46 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -425,7 +425,7 @@
 static inline void ath_rc_set_valid_txmask(struct ath_rate_priv *ath_rc_priv,
 					   u8 index, int valid_tx_rate)
 {
-	ASSERT(index <= ath_rc_priv->rate_table_size);
+	BUG_ON(index > ath_rc_priv->rate_table_size);
 	ath_rc_priv->valid_rate_index[index] = valid_tx_rate ? 1 : 0;
 }
 
@@ -1160,6 +1160,7 @@
 					     bool is_cw_40)
 {
 	int mode = 0;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	switch(band) {
 	case IEEE80211_BAND_2GHZ:
@@ -1177,13 +1178,14 @@
 			mode = ATH9K_MODE_11NA_HT40PLUS;
 		break;
 	default:
-		DPRINTF(sc, ATH_DBG_CONFIG, "Invalid band\n");
+		ath_print(common, ATH_DBG_CONFIG, "Invalid band\n");
 		return NULL;
 	}
 
 	BUG_ON(mode >= ATH9K_MODE_MAX);
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "Choosing rate table for mode: %d\n", mode);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "Choosing rate table for mode: %d\n", mode);
 	return sc->hw_rate_table[mode];
 }
 
@@ -1194,11 +1196,13 @@
 			const struct ath_rate_table *rate_table)
 {
 	struct ath_rateset *rateset = &ath_rc_priv->neg_rates;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	u8 *ht_mcs = (u8 *)&ath_rc_priv->neg_ht_rates;
 	u8 i, j, k, hi = 0, hthi = 0;
 
 	if (!rate_table) {
-		DPRINTF(sc, ATH_DBG_FATAL, "Rate table not initialized\n");
+		ath_print(common, ATH_DBG_FATAL,
+			  "Rate table not initialized\n");
 		return;
 	}
 
@@ -1239,7 +1243,7 @@
 
 	ath_rc_priv->rate_table_size = hi + 1;
 	ath_rc_priv->rate_max_phy = 0;
-	ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
+	BUG_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
 
 	for (i = 0, k = 0; i < WLAN_RC_PHY_MAX; i++) {
 		for (j = 0; j < ath_rc_priv->valid_phy_ratecnt[i]; j++) {
@@ -1253,16 +1257,17 @@
 
 		ath_rc_priv->rate_max_phy = ath_rc_priv->valid_phy_rateidx[i][j-1];
 	}
-	ASSERT(ath_rc_priv->rate_table_size <= RATE_TABLE_SIZE);
-	ASSERT(k <= RATE_TABLE_SIZE);
+	BUG_ON(ath_rc_priv->rate_table_size > RATE_TABLE_SIZE);
+	BUG_ON(k > RATE_TABLE_SIZE);
 
 	ath_rc_priv->max_valid_rate = k;
 	ath_rc_sort_validrates(rate_table, ath_rc_priv);
 	ath_rc_priv->rate_max_phy = ath_rc_priv->valid_rate_index[k-4];
 	sc->cur_rate_table = rate_table;
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "RC Initialized with capabilities: 0x%x\n",
-		ath_rc_priv->ht_cap);
+	ath_print(common, ATH_DBG_CONFIG,
+		  "RC Initialized with capabilities: 0x%x\n",
+		  ath_rc_priv->ht_cap);
 }
 
 static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta,
@@ -1438,9 +1443,9 @@
 						   oper_cw40, oper_sgi40);
 			ath_rc_init(sc, priv_sta, sband, sta, rate_table);
 
-			DPRINTF(sc, ATH_DBG_CONFIG,
-				"Operating HT Bandwidth changed to: %d\n",
-				sc->hw->conf.channel_type);
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_CONFIG,
+				  "Operating HT Bandwidth changed to: %d\n",
+				  sc->hw->conf.channel_type);
 		}
 	}
 }
@@ -1463,8 +1468,8 @@
 
 	rate_priv = kzalloc(sizeof(struct ath_rate_priv), gfp);
 	if (!rate_priv) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to allocate private rc structure\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to allocate private rc structure\n");
 		return NULL;
 	}
 
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index ec0abf8..c880a55 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -59,7 +59,7 @@
 
 	/* virtual addr of the beginning of the buffer. */
 	skb = bf->bf_mpdu;
-	ASSERT(skb != NULL);
+	BUG_ON(skb == NULL);
 	ds->ds_vdata = skb->data;
 
 	/* setup rx descriptors. The rx.bufsize here tells the harware
@@ -272,6 +272,8 @@
 static void ath_opmode_init(struct ath_softc *sc)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
+
 	u32 rfilt, mfilt[2];
 
 	/* configure rx filter */
@@ -280,13 +282,13 @@
 
 	/* configure bssid mask */
 	if (ah->caps.hw_caps & ATH9K_HW_CAP_BSSIDMASK)
-		ath9k_hw_setbssidmask(sc);
+		ath_hw_setbssidmask(common);
 
 	/* configure operational mode */
 	ath9k_hw_setopmode(ah);
 
 	/* Handle any link-level address change. */
-	ath9k_hw_setmac(ah, sc->sc_ah->macaddr);
+	ath9k_hw_setmac(ah, common->macaddr);
 
 	/* calculate and install multicast filter */
 	mfilt[0] = mfilt[1] = ~0;
@@ -295,6 +297,7 @@
 
 int ath_rx_init(struct ath_softc *sc, int nbufs)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct sk_buff *skb;
 	struct ath_buf *bf;
 	int error = 0;
@@ -304,23 +307,23 @@
 	spin_lock_init(&sc->rx.rxbuflock);
 
 	sc->rx.bufsize = roundup(IEEE80211_MAX_MPDU_LEN,
-				 min(sc->common.cachelsz, (u16)64));
+				 min(common->cachelsz, (u16)64));
 
-	DPRINTF(sc, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
-		sc->common.cachelsz, sc->rx.bufsize);
+	ath_print(common, ATH_DBG_CONFIG, "cachelsz %u rxbufsize %u\n",
+		  common->cachelsz, sc->rx.bufsize);
 
 	/* Initialize rx descriptors */
 
 	error = ath_descdma_setup(sc, &sc->rx.rxdma, &sc->rx.rxbuf,
 				  "rx", nbufs, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"failed to allocate rx descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "failed to allocate rx descriptors: %d\n", error);
 		goto err;
 	}
 
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
-		skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_KERNEL);
+		skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_KERNEL);
 		if (skb == NULL) {
 			error = -ENOMEM;
 			goto err;
@@ -334,8 +337,8 @@
 					       bf->bf_buf_addr))) {
 			dev_kfree_skb_any(skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"dma_mapping_error() on RX init\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "dma_mapping_error() on RX init\n");
 			error = -ENOMEM;
 			goto err;
 		}
@@ -420,7 +423,10 @@
 	else
 		rfilt |= ATH9K_RX_FILTER_BEACON;
 
-	if (sc->rx.rxfilter & FIF_PSPOLL)
+	if ((AR_SREV_9280_10_OR_LATER(sc->sc_ah) ||
+	    AR_SREV_9285_10_OR_LATER(sc->sc_ah)) &&
+	    (sc->sc_ah->opmode == NL80211_IFTYPE_AP) &&
+	    (sc->rx.rxfilter & FIF_PSPOLL))
 		rfilt |= ATH9K_RX_FILTER_PSPOLL;
 
 	if (conf_is_ht(&sc->hw->conf))
@@ -527,20 +533,22 @@
 static void ath_rx_ps_beacon(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ieee80211_mgmt *mgmt;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	if (skb->len < 24 + 8 + 2 + 2)
 		return;
 
 	mgmt = (struct ieee80211_mgmt *)skb->data;
-	if (memcmp(sc->curbssid, mgmt->bssid, ETH_ALEN) != 0)
+	if (memcmp(common->curbssid, mgmt->bssid, ETH_ALEN) != 0)
 		return; /* not from our current AP */
 
 	sc->sc_flags &= ~SC_OP_WAIT_FOR_BEACON;
 
 	if (sc->sc_flags & SC_OP_BEACON_SYNC) {
 		sc->sc_flags &= ~SC_OP_BEACON_SYNC;
-		DPRINTF(sc, ATH_DBG_PS, "Reconfigure Beacon timers based on "
-			"timestamp from the AP\n");
+		ath_print(common, ATH_DBG_PS,
+			  "Reconfigure Beacon timers based on "
+			  "timestamp from the AP\n");
 		ath_beacon_config(sc, NULL);
 	}
 
@@ -552,8 +560,8 @@
 		 * a backup trigger for returning into NETWORK SLEEP state,
 		 * so we are waiting for it as well.
 		 */
-		DPRINTF(sc, ATH_DBG_PS, "Received DTIM beacon indicating "
-			"buffered broadcast/multicast frame(s)\n");
+		ath_print(common, ATH_DBG_PS, "Received DTIM beacon indicating "
+			  "buffered broadcast/multicast frame(s)\n");
 		sc->sc_flags |= SC_OP_WAIT_FOR_CAB | SC_OP_WAIT_FOR_BEACON;
 		return;
 	}
@@ -565,13 +573,15 @@
 		 * been delivered.
 		 */
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
-		DPRINTF(sc, ATH_DBG_PS, "PS wait for CAB frames timed out\n");
+		ath_print(common, ATH_DBG_PS,
+			  "PS wait for CAB frames timed out\n");
 	}
 }
 
 static void ath_rx_ps(struct ath_softc *sc, struct sk_buff *skb)
 {
 	struct ieee80211_hdr *hdr;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 
 	hdr = (struct ieee80211_hdr *)skb->data;
 
@@ -589,14 +599,15 @@
 		 * point.
 		 */
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_CAB;
-		DPRINTF(sc, ATH_DBG_PS, "All PS CAB frames received, back to "
-			"sleep\n");
+		ath_print(common, ATH_DBG_PS,
+			  "All PS CAB frames received, back to sleep\n");
 	} else if ((sc->sc_flags & SC_OP_WAIT_FOR_PSPOLL_DATA) &&
 		   !is_multicast_ether_addr(hdr->addr1) &&
 		   !ieee80211_has_morefrags(hdr->frame_control)) {
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_PSPOLL_DATA;
-		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
-			"received PS-Poll data (0x%x)\n",
+		ath_print(common, ATH_DBG_PS,
+			  "Going back to sleep after having received "
+			  "PS-Poll data (0x%x)\n",
 			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
 					SC_OP_WAIT_FOR_CAB |
 					SC_OP_WAIT_FOR_PSPOLL_DATA |
@@ -651,6 +662,7 @@
 	struct sk_buff *skb = NULL, *requeue_skb;
 	struct ieee80211_rx_status rx_status;
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ieee80211_hdr *hdr;
 	int hdrlen, padsize, retval;
 	bool decrypt_error = false;
@@ -749,7 +761,7 @@
 
 		/* Ensure we always have an skb to requeue once we are done
 		 * processing the current buffer's skb */
-		requeue_skb = ath_rxbuf_alloc(&sc->common, sc->rx.bufsize, GFP_ATOMIC);
+		requeue_skb = ath_rxbuf_alloc(common, sc->rx.bufsize, GFP_ATOMIC);
 
 		/* If there is no memory we ignore the current RX'd frame,
 		 * tell hardware it can give us a new frame using the old
@@ -811,8 +823,8 @@
 			  bf->bf_buf_addr))) {
 			dev_kfree_skb_any(requeue_skb);
 			bf->bf_mpdu = NULL;
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"dma_mapping_error() on RX\n");
+			ath_print(common, ATH_DBG_FATAL,
+				  "dma_mapping_error() on RX\n");
 			ath_rx_send_to_mac80211(sc, skb, &rx_status);
 			break;
 		}
diff --git a/drivers/net/wireless/ath/ath9k/reg.h b/drivers/net/wireless/ath/ath9k/reg.h
index d83b77f8..ceed009 100644
--- a/drivers/net/wireless/ath/ath9k/reg.h
+++ b/drivers/net/wireless/ath/ath9k/reg.h
@@ -17,6 +17,8 @@
 #ifndef REG_H
 #define REG_H
 
+#include "../reg.h"
+
 #define AR_CR                0x0008
 #define AR_CR_RXE            0x00000004
 #define AR_CR_RXD            0x00000020
@@ -1421,9 +1423,6 @@
 #define AR_SLEEP2_BEACON_TIMEOUT    0xFFE00000
 #define AR_SLEEP2_BEACON_TIMEOUT_S  21
 
-#define AR_BSSMSKL            0x80e0
-#define AR_BSSMSKU            0x80e4
-
 #define AR_TPC                 0x80e8
 #define AR_TPC_ACK             0x0000003f
 #define AR_TPC_ACK_S           0x00
diff --git a/drivers/net/wireless/ath/ath9k/virtual.c b/drivers/net/wireless/ath/ath9k/virtual.c
index 19b88f8..bc7d173 100644
--- a/drivers/net/wireless/ath/ath9k/virtual.c
+++ b/drivers/net/wireless/ath/ath9k/virtual.c
@@ -40,6 +40,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath9k_vif_iter_data iter_data;
 	int i, j;
 	u8 mask[ETH_ALEN];
@@ -51,7 +52,7 @@
 	 */
 	iter_data.addr = kmalloc(ETH_ALEN, GFP_ATOMIC);
 	if (iter_data.addr) {
-		memcpy(iter_data.addr, sc->sc_ah->macaddr, ETH_ALEN);
+		memcpy(iter_data.addr, common->macaddr, ETH_ALEN);
 		iter_data.count = 1;
 	} else
 		iter_data.count = 0;
@@ -86,20 +87,21 @@
 	kfree(iter_data.addr);
 
 	/* Invert the mask and configure hardware */
-	sc->bssidmask[0] = ~mask[0];
-	sc->bssidmask[1] = ~mask[1];
-	sc->bssidmask[2] = ~mask[2];
-	sc->bssidmask[3] = ~mask[3];
-	sc->bssidmask[4] = ~mask[4];
-	sc->bssidmask[5] = ~mask[5];
+	common->bssidmask[0] = ~mask[0];
+	common->bssidmask[1] = ~mask[1];
+	common->bssidmask[2] = ~mask[2];
+	common->bssidmask[3] = ~mask[3];
+	common->bssidmask[4] = ~mask[4];
+	common->bssidmask[5] = ~mask[5];
 
-	ath9k_hw_setbssidmask(sc);
+	ath_hw_setbssidmask(common);
 }
 
 int ath9k_wiphy_add(struct ath_softc *sc)
 {
 	int i, error;
 	struct ath_wiphy *aphy;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ieee80211_hw *hw;
 	u8 addr[ETH_ALEN];
 
@@ -138,7 +140,7 @@
 	sc->sec_wiphy[i] = aphy;
 	spin_unlock_bh(&sc->wiphy_lock);
 
-	memcpy(addr, sc->sc_ah->macaddr, ETH_ALEN);
+	memcpy(addr, common->macaddr, ETH_ALEN);
 	addr[0] |= 0x02; /* Locally managed address */
 	/*
 	 * XOR virtual wiphy index into the least significant bits to generate
diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c
index 42551a4..2a4efcb 100644
--- a/drivers/net/wireless/ath/ath9k/xmit.c
+++ b/drivers/net/wireless/ath/ath9k/xmit.c
@@ -107,7 +107,7 @@
 {
 	struct ath_txq *txq = &sc->tx.txq[tid->ac->qnum];
 
-	ASSERT(tid->paused > 0);
+	BUG_ON(tid->paused <= 0);
 	spin_lock_bh(&txq->axq_lock);
 
 	tid->paused--;
@@ -131,7 +131,7 @@
 	struct list_head bf_head;
 	INIT_LIST_HEAD(&bf_head);
 
-	ASSERT(tid->paused > 0);
+	BUG_ON(tid->paused <= 0);
 	spin_lock_bh(&txq->axq_lock);
 
 	tid->paused--;
@@ -143,7 +143,7 @@
 
 	while (!list_empty(&tid->buf_q)) {
 		bf = list_first_entry(&tid->buf_q, struct ath_buf, list);
-		ASSERT(!bf_isretried(bf));
+		BUG_ON(bf_isretried(bf));
 		list_move_tail(&bf->list, &bf_head);
 		ath_tx_send_ht_normal(sc, txq, tid, &bf_head);
 	}
@@ -178,7 +178,7 @@
 	index  = ATH_BA_INDEX(tid->seq_start, bf->bf_seqno);
 	cindex = (tid->baw_head + index) & (ATH_TID_MAX_BUFS - 1);
 
-	ASSERT(tid->tx_buf[cindex] == NULL);
+	BUG_ON(tid->tx_buf[cindex] != NULL);
 	tid->tx_buf[cindex] = bf;
 
 	if (index >= ((tid->baw_tail - tid->baw_head) &
@@ -358,7 +358,7 @@
 			else
 				INIT_LIST_HEAD(&bf_head);
 		} else {
-			ASSERT(!list_empty(bf_q));
+			BUG_ON(list_empty(bf_q));
 			list_move_tail(&bf->list, &bf_head);
 		}
 
@@ -815,6 +815,7 @@
 struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath9k_tx_queue_info qi;
 	int qnum;
 
@@ -854,9 +855,9 @@
 		return NULL;
 	}
 	if (qnum >= ARRAY_SIZE(sc->tx.txq)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"qnum %u out of range, max %u!\n",
-			qnum, (unsigned int)ARRAY_SIZE(sc->tx.txq));
+		ath_print(common, ATH_DBG_FATAL,
+			  "qnum %u out of range, max %u!\n",
+			  qnum, (unsigned int)ARRAY_SIZE(sc->tx.txq));
 		ath9k_hw_releasetxqueue(ah, qnum);
 		return NULL;
 	}
@@ -884,9 +885,9 @@
 	switch (qtype) {
 	case ATH9K_TX_QUEUE_DATA:
 		if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"HAL AC %u out of range, max %zu!\n",
-				haltype, ARRAY_SIZE(sc->tx.hwq_map));
+			ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+				  "HAL AC %u out of range, max %zu!\n",
+				  haltype, ARRAY_SIZE(sc->tx.hwq_map));
 			return -1;
 		}
 		qnum = sc->tx.hwq_map[haltype];
@@ -914,9 +915,9 @@
 	spin_lock_bh(&txq->axq_lock);
 
 	if (txq->axq_depth >= (ATH_TXBUF - 20)) {
-		DPRINTF(sc, ATH_DBG_XMIT,
-			"TX queue: %d is full, depth: %d\n",
-			qnum, txq->axq_depth);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_XMIT,
+			  "TX queue: %d is full, depth: %d\n",
+			  qnum, txq->axq_depth);
 		ieee80211_stop_queue(sc->hw, skb_get_queue_mapping(skb));
 		txq->stopped = 1;
 		spin_unlock_bh(&txq->axq_lock);
@@ -945,7 +946,7 @@
 		return 0;
 	}
 
-	ASSERT(sc->tx.txq[qnum].axq_qnum == qnum);
+	BUG_ON(sc->tx.txq[qnum].axq_qnum != qnum);
 
 	ath9k_hw_get_txq_props(ah, qnum, &qi);
 	qi.tqi_aifs = qinfo->tqi_aifs;
@@ -955,8 +956,8 @@
 	qi.tqi_readyTime = qinfo->tqi_readyTime;
 
 	if (!ath9k_hw_set_txq_props(ah, qnum, &qi)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Unable to update hardware queue %u!\n", qnum);
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "Unable to update hardware queue %u!\n", qnum);
 		error = -EIO;
 	} else {
 		ath9k_hw_resettxqueue(ah, qnum);
@@ -1055,6 +1056,7 @@
 void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_txq *txq;
 	int i, npend = 0;
 
@@ -1076,14 +1078,15 @@
 	if (npend) {
 		int r;
 
-		DPRINTF(sc, ATH_DBG_XMIT, "Unable to stop TxDMA. Reset HAL!\n");
+		ath_print(common, ATH_DBG_XMIT,
+			  "Unable to stop TxDMA. Reset HAL!\n");
 
 		spin_lock_bh(&sc->sc_resetlock);
 		r = ath9k_hw_reset(ah, sc->sc_ah->curchan, true);
 		if (r)
-			DPRINTF(sc, ATH_DBG_FATAL,
-				"Unable to reset hardware; reset status %d\n",
-				r);
+			ath_print(common, ATH_DBG_FATAL,
+				  "Unable to reset hardware; reset status %d\n",
+				  r);
 		spin_unlock_bh(&sc->sc_resetlock);
 	}
 
@@ -1147,8 +1150,8 @@
 	struct ath_txq *txq;
 
 	if (haltype >= ARRAY_SIZE(sc->tx.hwq_map)) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"HAL AC %u out of range, max %zu!\n",
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "HAL AC %u out of range, max %zu!\n",
 			 haltype, ARRAY_SIZE(sc->tx.hwq_map));
 		return 0;
 	}
@@ -1172,6 +1175,7 @@
 			     struct list_head *head)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf;
 
 	/*
@@ -1188,19 +1192,19 @@
 	txq->axq_depth++;
 	txq->axq_linkbuf = list_entry(txq->axq_q.prev, struct ath_buf, list);
 
-	DPRINTF(sc, ATH_DBG_QUEUE,
-		"qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
+	ath_print(common, ATH_DBG_QUEUE,
+		  "qnum: %d, txq depth: %d\n", txq->axq_qnum, txq->axq_depth);
 
 	if (txq->axq_link == NULL) {
 		ath9k_hw_puttxbuf(ah, txq->axq_qnum, bf->bf_daddr);
-		DPRINTF(sc, ATH_DBG_XMIT,
-			"TXDP[%u] = %llx (%p)\n",
-			txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
+		ath_print(common, ATH_DBG_XMIT,
+			  "TXDP[%u] = %llx (%p)\n",
+			  txq->axq_qnum, ito64(bf->bf_daddr), bf->bf_desc);
 	} else {
 		*txq->axq_link = bf->bf_daddr;
-		DPRINTF(sc, ATH_DBG_XMIT, "link[%u] (%p)=%llx (%p)\n",
-			txq->axq_qnum, txq->axq_link,
-			ito64(bf->bf_daddr), bf->bf_desc);
+		ath_print(common, ATH_DBG_XMIT, "link[%u] (%p)=%llx (%p)\n",
+			  txq->axq_qnum, txq->axq_link,
+			  ito64(bf->bf_daddr), bf->bf_desc);
 	}
 	txq->axq_link = &(bf->bf_lastbf->bf_desc->ds_link);
 	ath9k_hw_txstart(ah, txq->axq_qnum);
@@ -1452,6 +1456,7 @@
 
 static void ath_buf_set_rate(struct ath_softc *sc, struct ath_buf *bf)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	const struct ath_rate_table *rt = sc->cur_rate_table;
 	struct ath9k_11n_rate_series series[4];
 	struct sk_buff *skb;
@@ -1507,7 +1512,7 @@
 
 		rix = rates[i].idx;
 		series[i].Tries = rates[i].count;
-		series[i].ChSel = sc->tx_chainmask;
+		series[i].ChSel = common->tx_chainmask;
 
 		if (rates[i].flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE)
 			series[i].Rate = rt->info[rix].ratecode |
@@ -1587,7 +1592,8 @@
 		bf->bf_mpdu = NULL;
 		kfree(tx_info_priv);
 		tx_info->rate_driver_data[0] = NULL;
-		DPRINTF(sc, ATH_DBG_FATAL, "dma_mapping_error() on TX\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+			  "dma_mapping_error() on TX\n");
 		return -ENOMEM;
 	}
 
@@ -1669,12 +1675,13 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	struct ath_buf *bf;
 	int r;
 
 	bf = ath_tx_get_buffer(sc);
 	if (!bf) {
-		DPRINTF(sc, ATH_DBG_XMIT, "TX buffers are full\n");
+		ath_print(common, ATH_DBG_XMIT, "TX buffers are full\n");
 		return -1;
 	}
 
@@ -1682,7 +1689,7 @@
 	if (unlikely(r)) {
 		struct ath_txq *txq = txctl->txq;
 
-		DPRINTF(sc, ATH_DBG_FATAL, "TX mem alloc failure\n");
+		ath_print(common, ATH_DBG_FATAL, "TX mem alloc failure\n");
 
 		/* upon ath_tx_processq() this TX queue will be resumed, we
 		 * guarantee this will happen by knowing beforehand that
@@ -1712,6 +1719,7 @@
 {
 	struct ath_wiphy *aphy = hw->priv;
 	struct ath_softc *sc = aphy->sc;
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int hdrlen, padsize;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_control txctl;
@@ -1736,7 +1744,8 @@
 	if (hdrlen & 3) {
 		padsize = hdrlen % 4;
 		if (skb_headroom(skb) < padsize) {
-			DPRINTF(sc, ATH_DBG_XMIT, "TX CABQ padding failed\n");
+			ath_print(common, ATH_DBG_XMIT,
+				  "TX CABQ padding failed\n");
 			dev_kfree_skb_any(skb);
 			return;
 		}
@@ -1746,10 +1755,11 @@
 
 	txctl.txq = sc->beacon.cabq;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "transmitting CABQ packet, skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT,
+		  "transmitting CABQ packet, skb: %p\n", skb);
 
 	if (ath_tx_start(hw, skb, &txctl) != 0) {
-		DPRINTF(sc, ATH_DBG_XMIT, "CABQ TX failed\n");
+		ath_print(common, ATH_DBG_XMIT, "CABQ TX failed\n");
 		goto exit;
 	}
 
@@ -1768,10 +1778,11 @@
 	struct ieee80211_hw *hw = sc->hw;
 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
 	struct ath_tx_info_priv *tx_info_priv = ATH_TX_INFO_PRIV(tx_info);
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int hdrlen, padsize;
 	int frame_type = ATH9K_NOT_INTERNAL;
 
-	DPRINTF(sc, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
+	ath_print(common, ATH_DBG_XMIT, "TX complete: skb: %p\n", skb);
 
 	if (tx_info_priv) {
 		hw = tx_info_priv->aphy->hw;
@@ -1805,8 +1816,9 @@
 
 	if (sc->sc_flags & SC_OP_WAIT_FOR_TX_ACK) {
 		sc->sc_flags &= ~SC_OP_WAIT_FOR_TX_ACK;
-		DPRINTF(sc, ATH_DBG_PS, "Going back to sleep after having "
-			"received TX status (0x%x)\n",
+		ath_print(common, ATH_DBG_PS,
+			  "Going back to sleep after having "
+			  "received TX status (0x%x)\n",
 			sc->sc_flags & (SC_OP_WAIT_FOR_BEACON |
 					SC_OP_WAIT_FOR_CAB |
 					SC_OP_WAIT_FOR_PSPOLL_DATA |
@@ -1936,15 +1948,16 @@
 static void ath_tx_processq(struct ath_softc *sc, struct ath_txq *txq)
 {
 	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf, *lastbf, *bf_held = NULL;
 	struct list_head bf_head;
 	struct ath_desc *ds;
 	int txok;
 	int status;
 
-	DPRINTF(sc, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
-		txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
-		txq->axq_link);
+	ath_print(common, ATH_DBG_QUEUE, "tx queue %d (%x), link %p\n",
+		  txq->axq_qnum, ath9k_hw_gettxbuf(sc->sc_ah, txq->axq_qnum),
+		  txq->axq_link);
 
 	for (;;) {
 		spin_lock_bh(&txq->axq_lock);
@@ -2064,8 +2077,11 @@
 		}
 
 	if (needreset) {
-		DPRINTF(sc, ATH_DBG_RESET, "tx hung, resetting the chip\n");
+		ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_RESET,
+			  "tx hung, resetting the chip\n");
+		ath9k_ps_wakeup(sc);
 		ath_reset(sc, false);
+		ath9k_ps_restore(sc);
 	}
 
 	ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
@@ -2093,6 +2109,7 @@
 
 int ath_tx_init(struct ath_softc *sc, int nbufs)
 {
+	struct ath_common *common = ath9k_hw_common(sc->sc_ah);
 	int error = 0;
 
 	spin_lock_init(&sc->tx.txbuflock);
@@ -2100,16 +2117,16 @@
 	error = ath_descdma_setup(sc, &sc->tx.txdma, &sc->tx.txbuf,
 				  "tx", nbufs, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to allocate tx descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to allocate tx descriptors: %d\n", error);
 		goto err;
 	}
 
 	error = ath_descdma_setup(sc, &sc->beacon.bdma, &sc->beacon.bbuf,
 				  "beacon", ATH_BCBUF, 1);
 	if (error != 0) {
-		DPRINTF(sc, ATH_DBG_FATAL,
-			"Failed to allocate beacon descriptors: %d\n", error);
+		ath_print(common, ATH_DBG_FATAL,
+			  "Failed to allocate beacon descriptors: %d\n", error);
 		goto err;
 	}
 
diff --git a/drivers/net/wireless/ath/debug.c b/drivers/net/wireless/ath/debug.c
new file mode 100644
index 0000000..53e77bd
--- /dev/null
+++ b/drivers/net/wireless/ath/debug.c
@@ -0,0 +1,32 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "ath.h"
+#include "debug.h"
+
+void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...)
+{
+	va_list args;
+
+	if (likely(!(common->debug_mask & dbg_mask)))
+		return;
+
+	va_start(args, fmt);
+	printk(KERN_DEBUG "ath: ");
+	vprintk(fmt, args);
+	va_end(args);
+}
+EXPORT_SYMBOL(ath_print);
diff --git a/drivers/net/wireless/ath/debug.h b/drivers/net/wireless/ath/debug.h
new file mode 100644
index 0000000..d6b685a
--- /dev/null
+++ b/drivers/net/wireless/ath/debug.h
@@ -0,0 +1,77 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_DEBUG_H
+#define ATH_DEBUG_H
+
+#include "ath.h"
+
+/**
+ * enum ath_debug_level - atheros wireless debug level
+ *
+ * @ATH_DBG_RESET: reset processing
+ * @ATH_DBG_QUEUE: hardware queue management
+ * @ATH_DBG_EEPROM: eeprom processing
+ * @ATH_DBG_CALIBRATE: periodic calibration
+ * @ATH_DBG_INTERRUPT: interrupt processing
+ * @ATH_DBG_REGULATORY: regulatory processing
+ * @ATH_DBG_ANI: adaptive noise immunitive processing
+ * @ATH_DBG_XMIT: basic xmit operation
+ * @ATH_DBG_BEACON: beacon handling
+ * @ATH_DBG_CONFIG: configuration of the hardware
+ * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
+ * @ATH_DBG_PS: power save processing
+ * @ATH_DBG_HWTIMER: hardware timer handling
+ * @ATH_DBG_BTCOEX: bluetooth coexistance
+ * @ATH_DBG_ANY: enable all debugging
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. Each driver has its own method for enabling debugging and
+ * modifying debug level states -- but this is typically done through a
+ * module parameter 'debug' along with a respective 'debug' debugfs file
+ * entry.
+ */
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
+	ATH_DBG_HWTIMER		= 0x00001000,
+	ATH_DBG_BTCOEX		= 0x00002000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
+
+#ifdef CONFIG_ATH_DEBUG
+void ath_print(struct ath_common *common, int dbg_mask, const char *fmt, ...);
+#else
+static inline void ath_print(struct ath_common *common,
+			     int dbg_mask,
+			     const char *fmt, ...)
+{
+}
+#endif /* CONFIG_ATH_DEBUG */
+
+#endif /* ATH_DEBUG_H */
diff --git a/drivers/net/wireless/ath/hw.c b/drivers/net/wireless/ath/hw.c
new file mode 100644
index 0000000..ecc9eb0
--- /dev/null
+++ b/drivers/net/wireless/ath/hw.c
@@ -0,0 +1,126 @@
+/*
+ * Copyright (c) 2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <asm/unaligned.h>
+
+#include "ath.h"
+#include "reg.h"
+
+#define REG_READ	common->ops->read
+#define REG_WRITE	common->ops->write
+
+/**
+ * ath_hw_set_bssid_mask - filter out bssids we listen
+ *
+ * @common: the ath_common struct for the device.
+ *
+ * BSSID masking is a method used by AR5212 and newer hardware to inform PCU
+ * which bits of the interface's MAC address should be looked at when trying
+ * to decide which packets to ACK. In station mode and AP mode with a single
+ * BSS every bit matters since we lock to only one BSS. In AP mode with
+ * multiple BSSes (virtual interfaces) not every bit matters because hw must
+ * accept frames for all BSSes and so we tweak some bits of our mac address
+ * in order to have multiple BSSes.
+ *
+ * NOTE: This is a simple filter and does *not* filter out all
+ * relevant frames. Some frames that are not for us might get ACKed from us
+ * by PCU because they just match the mask.
+ *
+ * When handling multiple BSSes you can get the BSSID mask by computing the
+ * set of  ~ ( MAC XOR BSSID ) for all bssids we handle.
+ *
+ * When you do this you are essentially computing the common bits of all your
+ * BSSes. Later it is assumed the harware will "and" (&) the BSSID mask with
+ * the MAC address to obtain the relevant bits and compare the result with
+ * (frame's BSSID & mask) to see if they match.
+ *
+ * Simple example: on your card you have have two BSSes you have created with
+ * BSSID-01 and BSSID-02. Lets assume BSSID-01 will not use the MAC address.
+ * There is another BSSID-03 but you are not part of it. For simplicity's sake,
+ * assuming only 4 bits for a mac address and for BSSIDs you can then have:
+ *
+ *                  \
+ * MAC:        0001 |
+ * BSSID-01:   0100 | --> Belongs to us
+ * BSSID-02:   1001 |
+ *                  /
+ * -------------------
+ * BSSID-03:   0110  | --> External
+ * -------------------
+ *
+ * Our bssid_mask would then be:
+ *
+ *             On loop iteration for BSSID-01:
+ *             ~(0001 ^ 0100)  -> ~(0101)
+ *                             ->   1010
+ *             bssid_mask      =    1010
+ *
+ *             On loop iteration for BSSID-02:
+ *             bssid_mask &= ~(0001   ^   1001)
+ *             bssid_mask =   (1010)  & ~(0001 ^ 1001)
+ *             bssid_mask =   (1010)  & ~(1001)
+ *             bssid_mask =   (1010)  &  (0110)
+ *             bssid_mask =   0010
+ *
+ * A bssid_mask of 0010 means "only pay attention to the second least
+ * significant bit". This is because its the only bit common
+ * amongst the MAC and all BSSIDs we support. To findout what the real
+ * common bit is we can simply "&" the bssid_mask now with any BSSID we have
+ * or our MAC address (we assume the hardware uses the MAC address).
+ *
+ * Now, suppose there's an incoming frame for BSSID-03:
+ *
+ * IFRAME-01:  0110
+ *
+ * An easy eye-inspeciton of this already should tell you that this frame
+ * will not pass our check. This is beacuse the bssid_mask tells the
+ * hardware to only look at the second least significant bit and the
+ * common bit amongst the MAC and BSSIDs is 0, this frame has the 2nd LSB
+ * as 1, which does not match 0.
+ *
+ * So with IFRAME-01 we *assume* the hardware will do:
+ *
+ *     allow = (IFRAME-01 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0110 & 0010) == (0010 & 0001) ? 1 : 0;
+ *  --> allow = (0010) == 0000 ? 1 : 0;
+ *  --> allow = 0
+ *
+ *  Lets now test a frame that should work:
+ *
+ * IFRAME-02:  0001 (we should allow)
+ *
+ *     allow = (0001 & 1010) == 1010
+ *
+ *     allow = (IFRAME-02 & bssid_mask) == (bssid_mask & MAC) ? 1 : 0;
+ *  --> allow = (0001 & 0010) ==  (0010 & 0001) ? 1 :0;
+ *  --> allow = (0010) == (0010)
+ *  --> allow = 1
+ *
+ * Other examples:
+ *
+ * IFRAME-03:  0100 --> allowed
+ * IFRAME-04:  1001 --> allowed
+ * IFRAME-05:  1101 --> allowed but its not for us!!!
+ *
+ */
+void ath_hw_setbssidmask(struct ath_common *common)
+{
+	void *ah = common->ah;
+
+	REG_WRITE(ah, get_unaligned_le32(common->bssidmask), AR_BSSMSKL);
+	REG_WRITE(ah, get_unaligned_le16(common->bssidmask + 4), AR_BSSMSKU);
+}
+EXPORT_SYMBOL(ath_hw_setbssidmask);
diff --git a/drivers/net/wireless/ath/reg.h b/drivers/net/wireless/ath/reg.h
new file mode 100644
index 0000000..dfe1fbe
--- /dev/null
+++ b/drivers/net/wireless/ath/reg.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2008-2009 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef ATH_REGISTERS_H
+#define ATH_REGISTERS_H
+
+/*
+ * BSSID mask registers. See ath_hw_set_bssid_mask()
+ * for detailed documentation about these registers.
+ */
+#define AR_BSSMSKL		0x80e0
+#define AR_BSSMSKU		0x80e4
+
+#endif /* ATH_REGISTERS_H */
diff --git a/drivers/net/wireless/ath/regd.h b/drivers/net/wireless/ath/regd.h
index c1dd857..a1c3952 100644
--- a/drivers/net/wireless/ath/regd.h
+++ b/drivers/net/wireless/ath/regd.h
@@ -65,10 +65,13 @@
 	CTRY_ALGERIA = 12,
 	CTRY_ARGENTINA = 32,
 	CTRY_ARMENIA = 51,
+	CTRY_ARUBA = 533,
 	CTRY_AUSTRALIA = 36,
 	CTRY_AUSTRIA = 40,
 	CTRY_AZERBAIJAN = 31,
 	CTRY_BAHRAIN = 48,
+	CTRY_BANGLADESH = 50,
+	CTRY_BARBADOS = 52,
 	CTRY_BELARUS = 112,
 	CTRY_BELGIUM = 56,
 	CTRY_BELIZE = 84,
@@ -77,6 +80,7 @@
 	CTRY_BRAZIL = 76,
 	CTRY_BRUNEI_DARUSSALAM = 96,
 	CTRY_BULGARIA = 100,
+	CTRY_CAMBODIA = 116,
 	CTRY_CANADA = 124,
 	CTRY_CHILE = 152,
 	CTRY_CHINA = 156,
@@ -97,7 +101,11 @@
 	CTRY_GEORGIA = 268,
 	CTRY_GERMANY = 276,
 	CTRY_GREECE = 300,
+	CTRY_GREENLAND = 304,
+	CTRY_GRENEDA = 308,
+	CTRY_GUAM = 316,
 	CTRY_GUATEMALA = 320,
+	CTRY_HAITI = 332,
 	CTRY_HONDURAS = 340,
 	CTRY_HONG_KONG = 344,
 	CTRY_HUNGARY = 348,
diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h
index 9847af7..248c670 100644
--- a/drivers/net/wireless/ath/regd_common.h
+++ b/drivers/net/wireless/ath/regd_common.h
@@ -288,13 +288,16 @@
 	{CTRY_DEFAULT, FCC1_FCCA, "CO"},
 	{CTRY_ALBANIA, NULL1_WORLD, "AL"},
 	{CTRY_ALGERIA, NULL1_WORLD, "DZ"},
-	{CTRY_ARGENTINA, APL3_WORLD, "AR"},
+	{CTRY_ARGENTINA, FCC3_WORLD, "AR"},
 	{CTRY_ARMENIA, ETSI4_WORLD, "AM"},
+	{CTRY_ARUBA, ETSI1_WORLD, "AW"},
 	{CTRY_AUSTRALIA, FCC2_WORLD, "AU"},
 	{CTRY_AUSTRALIA2, FCC6_WORLD, "AU"},
 	{CTRY_AUSTRIA, ETSI1_WORLD, "AT"},
 	{CTRY_AZERBAIJAN, ETSI4_WORLD, "AZ"},
 	{CTRY_BAHRAIN, APL6_WORLD, "BH"},
+	{CTRY_BANGLADESH, NULL1_WORLD, "BD"},
+	{CTRY_BARBADOS, FCC2_WORLD, "BB"},
 	{CTRY_BELARUS, ETSI1_WORLD, "BY"},
 	{CTRY_BELGIUM, ETSI1_WORLD, "BE"},
 	{CTRY_BELGIUM2, ETSI4_WORLD, "BL"},
@@ -304,13 +307,14 @@
 	{CTRY_BRAZIL, FCC3_WORLD, "BR"},
 	{CTRY_BRUNEI_DARUSSALAM, APL1_WORLD, "BN"},
 	{CTRY_BULGARIA, ETSI6_WORLD, "BG"},
-	{CTRY_CANADA, FCC2_FCCA, "CA"},
+	{CTRY_CAMBODIA, ETSI1_WORLD, "KH"},
+	{CTRY_CANADA, FCC3_FCCA, "CA"},
 	{CTRY_CANADA2, FCC6_FCCA, "CA"},
 	{CTRY_CHILE, APL6_WORLD, "CL"},
 	{CTRY_CHINA, APL1_WORLD, "CN"},
 	{CTRY_COLOMBIA, FCC1_FCCA, "CO"},
 	{CTRY_COSTA_RICA, FCC1_WORLD, "CR"},
-	{CTRY_CROATIA, ETSI3_WORLD, "HR"},
+	{CTRY_CROATIA, ETSI1_WORLD, "HR"},
 	{CTRY_CYPRUS, ETSI1_WORLD, "CY"},
 	{CTRY_CZECH, ETSI3_WORLD, "CZ"},
 	{CTRY_DENMARK, ETSI1_WORLD, "DK"},
@@ -324,18 +328,22 @@
 	{CTRY_GEORGIA, ETSI4_WORLD, "GE"},
 	{CTRY_GERMANY, ETSI1_WORLD, "DE"},
 	{CTRY_GREECE, ETSI1_WORLD, "GR"},
+	{CTRY_GREENLAND, ETSI1_WORLD, "GL"},
+	{CTRY_GRENEDA, FCC3_FCCA, "GD"},
+	{CTRY_GUAM, FCC1_FCCA, "GU"},
 	{CTRY_GUATEMALA, FCC1_FCCA, "GT"},
+	{CTRY_HAITI, ETSI1_WORLD, "HT"},
 	{CTRY_HONDURAS, NULL1_WORLD, "HN"},
-	{CTRY_HONG_KONG, FCC2_WORLD, "HK"},
+	{CTRY_HONG_KONG, FCC3_WORLD, "HK"},
 	{CTRY_HUNGARY, ETSI1_WORLD, "HU"},
 	{CTRY_ICELAND, ETSI1_WORLD, "IS"},
 	{CTRY_INDIA, APL6_WORLD, "IN"},
-	{CTRY_INDONESIA, APL1_WORLD, "ID"},
+	{CTRY_INDONESIA, NULL1_WORLD, "ID"},
 	{CTRY_IRAN, APL1_WORLD, "IR"},
 	{CTRY_IRELAND, ETSI1_WORLD, "IE"},
 	{CTRY_ISRAEL, NULL1_WORLD, "IL"},
 	{CTRY_ITALY, ETSI1_WORLD, "IT"},
-	{CTRY_JAMAICA, ETSI1_WORLD, "JM"},
+	{CTRY_JAMAICA, FCC3_WORLD, "JM"},
 
 	{CTRY_JAPAN, MKK1_MKKA, "JP"},
 	{CTRY_JAPAN1, MKK1_MKKB, "JP"},
@@ -402,7 +410,7 @@
 	{CTRY_KOREA_ROC, APL9_WORLD, "KR"},
 	{CTRY_KOREA_ROC2, APL2_WORLD, "K2"},
 	{CTRY_KOREA_ROC3, APL9_WORLD, "K3"},
-	{CTRY_KUWAIT, NULL1_WORLD, "KW"},
+	{CTRY_KUWAIT, ETSI3_WORLD, "KW"},
 	{CTRY_LATVIA, ETSI1_WORLD, "LV"},
 	{CTRY_LEBANON, NULL1_WORLD, "LB"},
 	{CTRY_LIECHTENSTEIN, ETSI1_WORLD, "LI"},
@@ -414,13 +422,13 @@
 	{CTRY_MALTA, ETSI1_WORLD, "MT"},
 	{CTRY_MEXICO, FCC1_FCCA, "MX"},
 	{CTRY_MONACO, ETSI4_WORLD, "MC"},
-	{CTRY_MOROCCO, NULL1_WORLD, "MA"},
+	{CTRY_MOROCCO, APL4_WORLD, "MA"},
 	{CTRY_NEPAL, APL1_WORLD, "NP"},
 	{CTRY_NETHERLANDS, ETSI1_WORLD, "NL"},
 	{CTRY_NETHERLANDS_ANTILLES, ETSI1_WORLD, "AN"},
 	{CTRY_NEW_ZEALAND, FCC2_ETSIC, "NZ"},
 	{CTRY_NORWAY, ETSI1_WORLD, "NO"},
-	{CTRY_OMAN, APL6_WORLD, "OM"},
+	{CTRY_OMAN, FCC3_WORLD, "OM"},
 	{CTRY_PAKISTAN, NULL1_WORLD, "PK"},
 	{CTRY_PANAMA, FCC1_FCCA, "PA"},
 	{CTRY_PAPUA_NEW_GUINEA, FCC1_WORLD, "PG"},
@@ -429,7 +437,7 @@
 	{CTRY_POLAND, ETSI1_WORLD, "PL"},
 	{CTRY_PORTUGAL, ETSI1_WORLD, "PT"},
 	{CTRY_PUERTO_RICO, FCC1_FCCA, "PR"},
-	{CTRY_QATAR, NULL1_WORLD, "QA"},
+	{CTRY_QATAR, APL1_WORLD, "QA"},
 	{CTRY_ROMANIA, NULL1_WORLD, "RO"},
 	{CTRY_RUSSIA, NULL1_WORLD, "RU"},
 	{CTRY_SAUDI_ARABIA, NULL1_WORLD, "SA"},
@@ -445,7 +453,7 @@
 	{CTRY_SYRIA, NULL1_WORLD, "SY"},
 	{CTRY_TAIWAN, APL3_FCCA, "TW"},
 	{CTRY_THAILAND, FCC3_WORLD, "TH"},
-	{CTRY_TRINIDAD_Y_TOBAGO, ETSI4_WORLD, "TT"},
+	{CTRY_TRINIDAD_Y_TOBAGO, FCC3_WORLD, "TT"},
 	{CTRY_TUNISIA, ETSI3_WORLD, "TN"},
 	{CTRY_TURKEY, ETSI3_WORLD, "TR"},
 	{CTRY_UKRAINE, NULL1_WORLD, "UA"},
@@ -456,7 +464,7 @@
 	 * would need to assign new special alpha2 to CRDA db as with the world
 	 * regdomain and use another alpha2 */
 	{CTRY_UNITED_STATES_FCC49, FCC4_FCCA, "PS"},
-	{CTRY_URUGUAY, APL2_WORLD, "UY"},
+	{CTRY_URUGUAY, FCC3_WORLD, "UY"},
 	{CTRY_UZBEKISTAN, FCC3_FCCA, "UZ"},
 	{CTRY_VENEZUELA, APL2_ETSIC, "VE"},
 	{CTRY_VIET_NAM, NULL1_WORLD, "VN"},
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 6607162..65b23f72 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -749,12 +749,6 @@
 #endif
 };
 
-/*
- * Include goes here to avoid a dependency problem.
- * A better fix would be to integrate xmit.h into b43.h.
- */
-#include "xmit.h"
-
 /* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
 struct b43_wl {
 	/* Pointer to the active wireless device on this chip */
@@ -830,13 +824,9 @@
 	struct b43_leds leds;
 
 #ifdef CONFIG_B43_PIO
-	/*
-	 * RX/TX header/tail buffers used by the frame transmit functions.
-	 */
-	struct b43_rxhdr_fw4 rxhdr;
-	struct b43_txhdr txhdr;
-	u8 rx_tail[4];
-	u8 tx_tail[4];
+	/* Kmalloc'ed scratch space for PIO TX/RX. Protected by wl->mutex. */
+	u8 pio_scratchspace[110] __attribute__((__aligned__(8)));
+	u8 pio_tailspace[4] __attribute__((__aligned__(8)));
 #endif /* CONFIG_B43_PIO */
 };
 
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 86f3582..ed6e96a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4670,7 +4670,7 @@
 {
 	struct b43_wl *wl = dev->wl;
 	struct ssb_bus *bus = dev->dev->bus;
-	struct pci_dev *pdev = bus->host_pci;
+	struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
 	int err;
 	bool have_2ghz_phy = 0, have_5ghz_phy = 0;
 	u32 tmp;
@@ -4803,7 +4803,7 @@
 
 	if (!list_empty(&wl->devlist)) {
 		/* We are not the first core on this chip. */
-		pdev = dev->bus->host_pci;
+		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
 		/* Only special chips support more than one wireless
 		 * core, although some of the other chips have more than
 		 * one wireless core as well. Check for this and
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c
index 1e318d8..c6987b1 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -379,6 +379,8 @@
 	}
 }
 
+/* lpphy_restore_dig_flt_state is unused but kept as a reference */
+#if 0
 static void lpphy_restore_dig_flt_state(struct b43_wldev *dev)
 {
 	static const u16 addr[] = {
@@ -399,6 +401,7 @@
 	for (i = 0; i < ARRAY_SIZE(addr); i++)
 		b43_phy_write(dev, addr[i], lpphy->dig_flt_state[i]);
 }
+#endif
 
 static void lpphy_baseband_rev2plus_init(struct b43_wldev *dev)
 {
@@ -887,6 +890,8 @@
 	}
 }
 
+/* lpphy_disable_rx_gain_override is unused but kept as a reference */
+#if 0
 static void lpphy_disable_rx_gain_override(struct b43_wldev *dev)
 {
 	b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xFFFE);
@@ -902,6 +907,7 @@
 		b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_2, 0xFDFF);
 	}
 }
+#endif
 
 static void lpphy_enable_rx_gain_override(struct b43_wldev *dev)
 {
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index dbbf0d1..3105f235 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -341,12 +341,15 @@
 			q->mmio_base + B43_PIO_TXDATA,
 			sizeof(u16));
 	if (data_len & 1) {
+		u8 *tail = wl->pio_tailspace;
+		BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 2);
+
 		/* Write the last byte. */
 		ctl &= ~B43_PIO_TXCTL_WRITEHI;
 		b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
-		wl->tx_tail[0] = data[data_len - 1];
-		wl->tx_tail[1] = 0;
-		ssb_block_write(dev->dev, wl->tx_tail, 2,
+		tail[0] = data[data_len - 1];
+		tail[1] = 0;
+		ssb_block_write(dev->dev, tail, 2,
 				q->mmio_base + B43_PIO_TXDATA,
 				sizeof(u16));
 	}
@@ -392,31 +395,31 @@
 			q->mmio_base + B43_PIO8_TXDATA,
 			sizeof(u32));
 	if (data_len & 3) {
-		wl->tx_tail[3] = 0;
+		u8 *tail = wl->pio_tailspace;
+		BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 4);
+
+		memset(tail, 0, 4);
 		/* Write the last few bytes. */
 		ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
 			 B43_PIO8_TXCTL_24_31);
 		switch (data_len & 3) {
 		case 3:
 			ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
-			wl->tx_tail[0] = data[data_len - 3];
-			wl->tx_tail[1] = data[data_len - 2];
-			wl->tx_tail[2] = data[data_len - 1];
+			tail[0] = data[data_len - 3];
+			tail[1] = data[data_len - 2];
+			tail[2] = data[data_len - 1];
 			break;
 		case 2:
 			ctl |= B43_PIO8_TXCTL_8_15;
-			wl->tx_tail[0] = data[data_len - 2];
-			wl->tx_tail[1] = data[data_len - 1];
-			wl->tx_tail[2] = 0;
+			tail[0] = data[data_len - 2];
+			tail[1] = data[data_len - 1];
 			break;
 		case 1:
-			wl->tx_tail[0] = data[data_len - 1];
-			wl->tx_tail[1] = 0;
-			wl->tx_tail[2] = 0;
+			tail[0] = data[data_len - 1];
 			break;
 		}
 		b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
-		ssb_block_write(dev->dev, wl->tx_tail, 4,
+		ssb_block_write(dev->dev, tail, 4,
 				q->mmio_base + B43_PIO8_TXDATA,
 				sizeof(u32));
 	}
@@ -455,6 +458,7 @@
 	int err;
 	unsigned int hdrlen;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	struct b43_txhdr *txhdr = (struct b43_txhdr *)wl->pio_scratchspace;
 
 	B43_WARN_ON(list_empty(&q->packets_list));
 	pack = list_entry(q->packets_list.next,
@@ -462,7 +466,9 @@
 
 	cookie = generate_cookie(q, pack);
 	hdrlen = b43_txhdr_size(dev);
-	err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
+	BUILD_BUG_ON(sizeof(wl->pio_scratchspace) < sizeof(struct b43_txhdr));
+	B43_WARN_ON(sizeof(wl->pio_scratchspace) < hdrlen);
+	err = b43_generate_txhdr(dev, (u8 *)txhdr, skb,
 				 info, cookie);
 	if (err)
 		return err;
@@ -476,9 +482,9 @@
 
 	pack->skb = skb;
 	if (q->rev >= 8)
-		pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
+		pio_tx_frame_4byte_queue(pack, (const u8 *)txhdr, hdrlen);
 	else
-		pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
+		pio_tx_frame_2byte_queue(pack, (const u8 *)txhdr, hdrlen);
 
 	/* Remove it from the list of available packet slots.
 	 * It will be put back when we receive the status report. */
@@ -624,8 +630,11 @@
 	unsigned int i, padding;
 	struct sk_buff *skb;
 	const char *err_msg = NULL;
+	struct b43_rxhdr_fw4 *rxhdr =
+		(struct b43_rxhdr_fw4 *)wl->pio_scratchspace;
 
-	memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
+	BUILD_BUG_ON(sizeof(wl->pio_scratchspace) < sizeof(*rxhdr));
+	memset(rxhdr, 0, sizeof(*rxhdr));
 
 	/* Check if we have data and wait for it to get ready. */
 	if (q->rev >= 8) {
@@ -663,16 +672,16 @@
 
 	/* Get the preamble (RX header) */
 	if (q->rev >= 8) {
-		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
+		ssb_block_read(dev->dev, rxhdr, sizeof(*rxhdr),
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 	} else {
-		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
+		ssb_block_read(dev->dev, rxhdr, sizeof(*rxhdr),
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 	}
 	/* Sanity checks. */
-	len = le16_to_cpu(wl->rxhdr.frame_len);
+	len = le16_to_cpu(rxhdr->frame_len);
 	if (unlikely(len > 0x700)) {
 		err_msg = "len > 0x700";
 		goto rx_error;
@@ -682,7 +691,7 @@
 		goto rx_error;
 	}
 
-	macstat = le32_to_cpu(wl->rxhdr.mac_status);
+	macstat = le32_to_cpu(rxhdr->mac_status);
 	if (macstat & B43_RX_MAC_FCSERR) {
 		if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
 			/* Drop frames with failed FCS. */
@@ -707,22 +716,25 @@
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 		if (len & 3) {
+			u8 *tail = wl->pio_tailspace;
+			BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 4);
+
 			/* Read the last few bytes. */
-			ssb_block_read(dev->dev, wl->rx_tail, 4,
+			ssb_block_read(dev->dev, tail, 4,
 				       q->mmio_base + B43_PIO8_RXDATA,
 				       sizeof(u32));
 			switch (len & 3) {
 			case 3:
-				skb->data[len + padding - 3] = wl->rx_tail[0];
-				skb->data[len + padding - 2] = wl->rx_tail[1];
-				skb->data[len + padding - 1] = wl->rx_tail[2];
+				skb->data[len + padding - 3] = tail[0];
+				skb->data[len + padding - 2] = tail[1];
+				skb->data[len + padding - 1] = tail[2];
 				break;
 			case 2:
-				skb->data[len + padding - 2] = wl->rx_tail[0];
-				skb->data[len + padding - 1] = wl->rx_tail[1];
+				skb->data[len + padding - 2] = tail[0];
+				skb->data[len + padding - 1] = tail[1];
 				break;
 			case 1:
-				skb->data[len + padding - 1] = wl->rx_tail[0];
+				skb->data[len + padding - 1] = tail[0];
 				break;
 			}
 		}
@@ -731,15 +743,18 @@
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 		if (len & 1) {
+			u8 *tail = wl->pio_tailspace;
+			BUILD_BUG_ON(sizeof(wl->pio_tailspace) < 2);
+
 			/* Read the last byte. */
-			ssb_block_read(dev->dev, wl->rx_tail, 2,
+			ssb_block_read(dev->dev, tail, 2,
 				       q->mmio_base + B43_PIO_RXDATA,
 				       sizeof(u16));
-			skb->data[len + padding - 1] = wl->rx_tail[0];
+			skb->data[len + padding - 1] = tail[0];
 		}
 	}
 
-	b43_rx(q->dev, skb, &wl->rxhdr);
+	b43_rx(q->dev, skb, rxhdr);
 
 	return 1;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index f4e9695..7a5e294 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -27,7 +27,7 @@
 
 */
 
-#include "b43.h"
+#include "xmit.h"
 #include "phy_common.h"
 #include "dma.h"
 #include "pio.h"
@@ -690,10 +690,7 @@
 	}
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
-
-	local_bh_disable();
-	ieee80211_rx(dev->wl->hw, skb);
-	local_bh_enable();
+	ieee80211_rx_ni(dev->wl->hw, skb);
 
 #if B43_DEBUG
 	dev->rx_count++;
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 1d9223b..0983406 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3592,7 +3592,7 @@
 {
 	struct b43legacy_wl *wl = dev->wl;
 	struct ssb_bus *bus = dev->dev->bus;
-	struct pci_dev *pdev = bus->host_pci;
+	struct pci_dev *pdev = (bus->bustype == SSB_BUSTYPE_PCI) ? bus->host_pci : NULL;
 	int err;
 	int have_bphy = 0;
 	int have_gphy = 0;
@@ -3706,7 +3706,7 @@
 
 	if (!list_empty(&wl->devlist)) {
 		/* We are not the first core on this chip. */
-		pdev = dev->bus->host_pci;
+		pdev = (dev->bus->bustype == SSB_BUSTYPE_PCI) ? dev->bus->host_pci : NULL;
 		/* Only special chips support more than one wireless
 		 * core, although some of the other chips have more than
 		 * one wireless core as well. Check for this and
diff --git a/drivers/net/wireless/hostap/Kconfig b/drivers/net/wireless/hostap/Kconfig
index c15db22..08f1e98 100644
--- a/drivers/net/wireless/hostap/Kconfig
+++ b/drivers/net/wireless/hostap/Kconfig
@@ -2,6 +2,8 @@
 	tristate "IEEE 802.11 for Host AP (Prism2/2.5/3 and WEP/TKIP/CCMP)"
 	depends on WLAN_80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select CRYPTO
 	select CRYPTO_ARC4
 	select CRYPTO_ECB
diff --git a/drivers/net/wireless/ipw2x00/Kconfig b/drivers/net/wireless/ipw2x00/Kconfig
index a813138..59ec9ee 100644
--- a/drivers/net/wireless/ipw2x00/Kconfig
+++ b/drivers/net/wireless/ipw2x00/Kconfig
@@ -6,6 +6,8 @@
 	tristate "Intel PRO/Wireless 2100 Network Connection"
 	depends on PCI && WLAN_80211 && CFG80211
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select LIB80211
 	select LIBIPW
@@ -63,8 +65,10 @@
 
 config IPW2200
 	tristate "Intel PRO/Wireless 2200BG and 2915ABG Network Connection"
-	depends on PCI && WLAN_80211 && CFG80211
+	depends on PCI && WLAN_80211 && CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select LIB80211
 	select LIBIPW
@@ -152,6 +156,7 @@
 	tristate
 	depends on PCI && WLAN_80211 && CFG80211
 	select WIRELESS_EXT
+	select WEXT_SPY
 	select CRYPTO
 	select CRYPTO_ARC4
 	select CRYPTO_ECB
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 04341a2a..4539e63 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11275,6 +11275,7 @@
 		if (!(priv->config & CFG_CUSTOM_MAC))
 			eeprom_parse_mac(priv, priv->mac_addr);
 		memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
+		memcpy(priv->net_dev->perm_addr, priv->mac_addr, ETH_ALEN);
 
 		for (j = 0; j < ARRAY_SIZE(ipw_geos); j++) {
 			if (!memcmp(&priv->eeprom[EEPROM_COUNTRY_CODE],
diff --git a/drivers/net/wireless/iwlwifi/Kconfig b/drivers/net/wireless/iwlwifi/Kconfig
index 99310c0..c82c97b 100644
--- a/drivers/net/wireless/iwlwifi/Kconfig
+++ b/drivers/net/wireless/iwlwifi/Kconfig
@@ -1,17 +1,7 @@
 config IWLWIFI
 	tristate "Intel Wireless Wifi"
 	depends on PCI && MAC80211 && WLAN_80211 && EXPERIMENTAL
-	select LIB80211
 	select FW_LOADER
-	select MAC80211_LEDS if IWLWIFI_LEDS
-	select LEDS_CLASS if IWLWIFI_LEDS
-
-config IWLWIFI_LEDS
-	bool "Enable LED support in iwlagn and iwl3945 drivers"
-	depends on IWLWIFI
-	default y
-	---help---
-	  Select this if you want LED support.
 
 config IWLWIFI_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwlagn driver"
@@ -50,6 +40,24 @@
         ---help---
 	  Enable creation of debugfs files for the iwlwifi drivers.
 
+config IWLWIFI_DEVICE_TRACING
+	bool "iwlwifi device access tracing"
+	depends on IWLWIFI
+	depends on EVENT_TRACING
+	help
+	  Say Y here to trace all commands, including TX frames and IO
+	  accesses, sent to the device. If you say yes, iwlwifi will
+	  register with the ftrace framework for event tracing and dump
+	  all this information to the ringbuffer, you may need to
+	  increase the ringbuffer size. See the ftrace documentation
+	  for more information.
+
+	  When tracing is not enabled, this option still has some
+	  (though rather small) overhead.
+
+	  If unsure, say Y so we can help you better when problems
+	  occur.
+
 config IWLAGN
 	tristate "Intel Wireless WiFi Next Gen AGN (iwlagn)"
 	depends on IWLWIFI
diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile
index 1d4e0a2..7f82044 100644
--- a/drivers/net/wireless/iwlwifi/Makefile
+++ b/drivers/net/wireless/iwlwifi/Makefile
@@ -1,20 +1,22 @@
 obj-$(CONFIG_IWLWIFI)	+= iwlcore.o
 iwlcore-objs 		:= iwl-core.o iwl-eeprom.o iwl-hcmd.o iwl-power.o
 iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
-iwlcore-objs 		+= iwl-scan.o
+iwlcore-objs 		+= iwl-scan.o iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
-iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
 iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
+iwlcore-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
 
+CFLAGS_iwl-devtrace.o := -I$(src)
+
+# AGN
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o
-iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o
+iwlagn-objs		:= iwl-agn.o iwl-agn-rs.o iwl-agn-led.o
 
 iwlagn-$(CONFIG_IWL4965) += iwl-4965.o
 iwlagn-$(CONFIG_IWL5000) += iwl-5000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-6000.o
 iwlagn-$(CONFIG_IWL5000) += iwl-1000.o
 
+# 3945
 obj-$(CONFIG_IWL3945)	+= iwl3945.o
 iwl3945-objs		:= iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
-
-
diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c
index 2716b91..3a645e4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-1000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-1000.c
@@ -44,6 +44,7 @@
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
+#include "iwl-agn-led.h"
 
 /* Highest firmware API version supported */
 #define IWL1000_UCODE_API_MAX 3
@@ -76,7 +77,10 @@
 /* NIC configuration for 1000 series */
 static void iwl1000_nic_config(struct iwl_priv *priv)
 {
-	iwl5000_nic_config(priv);
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
 	/* Setting digital SVR for 1000 card to 1.32V */
 	/* locking is acquired in iwl_set_bits_mask_prph() function */
@@ -106,9 +110,8 @@
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl1000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -142,6 +145,7 @@
 	.lib = &iwl1000_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_cfg iwl1000_bgn_cfg = {
@@ -152,14 +156,48 @@
 	.sku = IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl1000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = false,
+	.use_bsm = false,
 	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
 	.shadow_ram_support = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.support_ct_kill_exit = true,
 };
 
+struct iwl_cfg iwl1000_bg_cfg = {
+	.name = "1000 Series BG",
+	.fw_name_pre = IWL1000_FW_PRE,
+	.ucode_api_max = IWL1000_UCODE_API_MAX,
+	.ucode_api_min = IWL1000_UCODE_API_MIN,
+	.sku = IWL_SKU_G,
+	.ops = &iwl1000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_1000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_A,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = false,
+	.use_bsm = false,
+	.max_ll_items = OTP_MAX_LL_ITEMS_1000,
+	.shadow_ram_support = false,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.support_ct_kill_exit = true,
+};
+
+MODULE_FIRMWARE(IWL1000_MODULE_FIRMWARE(IWL1000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
index 1677278..6fd10d4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-hw.h
@@ -71,12 +71,6 @@
 
 #include "iwl-eeprom.h"
 
-/*
- * uCode queue management definitions ...
- * Queue #4 is the command queue for 3945 and 4965.
- */
-#define IWL_CMD_QUEUE_NUM	4
-
 /* Time constants */
 #define SHORT_SLOT_TIME 9
 #define LONG_SLOT_TIME 20
@@ -254,12 +248,6 @@
 #define TFD_CTL_PAD_SET(n)         (n << 28)
 #define TFD_CTL_PAD_GET(ctl)       (ctl >> 28)
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 /* Sizes and addresses for instruction and data memory (SRAM) in
  * 3945's embedded processor.  Driver access is via HBUS_TARG_MEM_* regs. */
 #define IWL39_RTC_INST_LOWER_BOUND		(0x000000)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index 8c29ded..a871d09 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -24,8 +24,6 @@
  *
  *****************************************************************************/
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -43,388 +41,51 @@
 #include "iwl-3945.h"
 #include "iwl-core.h"
 #include "iwl-dev.h"
+#include "iwl-3945-led.h"
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static const char *led_type_str[] = {
-	__stringify(IWL_LED_TRG_TX),
-	__stringify(IWL_LED_TRG_RX),
-	__stringify(IWL_LED_TRG_ASSOC),
-	__stringify(IWL_LED_TRG_RADIO),
-	NULL
-};
-#endif /* CONFIG_IWLWIFI_DEBUG */
-
-static const struct {
-	u16 brightness;
-	u8 on_time;
-	u8 off_time;
-} blink_tbl[] =
-{
-	{300, 25, 25},
-	{200, 40, 40},
-	{100, 55, 55},
-	{70, 65, 65},
-	{50, 75, 75},
-	{20, 85, 85},
-	{15, 95, 95 },
-	{10, 110, 110},
-	{5, 130, 130},
-	{0, 167, 167},
-	/* SOLID_ON */
-	{-1, IWL_LED_SOLID, 0}
-};
-
-#define IWL_1MB_RATE (128 * 1024)
-#define IWL_LED_THRESHOLD (16)
-#define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /*Exclude Solid on*/
-#define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1)
-
-static void iwl3945_led_cmd_callback(struct iwl_priv *priv,
-				     struct iwl_device_cmd *cmd,
-				     struct sk_buff *skb)
-{
-}
-
-static inline int iwl3945_brightness_to_idx(enum led_brightness brightness)
-{
-	return fls(0x000000FF & (u32)brightness);
-}
 
 /* Send led command */
-static int iwl_send_led_cmd(struct iwl_priv *priv,
-			    struct iwl_led_cmd *led_cmd)
+static int iwl3945_send_led_cmd(struct iwl_priv *priv,
+				struct iwl_led_cmd *led_cmd)
 {
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_LEDS_CMD,
 		.len = sizeof(struct iwl_led_cmd),
 		.data = led_cmd,
 		.flags = CMD_ASYNC,
-		.callback = iwl3945_led_cmd_callback,
+		.callback = NULL,
 	};
 
 	return iwl_send_cmd(priv, &cmd);
 }
 
-
-
 /* Set led on command */
-static int iwl3945_led_pattern(struct iwl_priv *priv, int led_id,
-			       unsigned int idx)
+static int iwl3945_led_on(struct iwl_priv *priv)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-
-	BUG_ON(idx > IWL_MAX_BLINK_TBL);
-
-	led_cmd.on = blink_tbl[idx].on_time;
-	led_cmd.off = blink_tbl[idx].off_time;
-
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-
-
-/* Set led on command */
-static int iwl3945_led_on(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.on = IWL_LED_SOLID,
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	return iwl_send_led_cmd(priv, &led_cmd);
+	return iwl3945_send_led_cmd(priv, &led_cmd);
 }
 
 /* Set led off command */
-static int iwl3945_led_off(struct iwl_priv *priv, int led_id)
+static int iwl3945_led_off(struct iwl_priv *priv)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.on = 0,
 		.off = 0,
 		.interval = IWL_DEF_LED_INTRVL
 	};
-	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
-	return iwl_send_led_cmd(priv, &led_cmd);
+	IWL_DEBUG_LED(priv, "led off\n");
+	return iwl3945_send_led_cmd(priv, &led_cmd);
 }
 
-/*
- *  Set led on in case of association
- *  */
-static int iwl3945_led_associate(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "Associated\n");
-
-	priv->allow_blinking = 1;
-	return iwl3945_led_on(priv, led_id);
-}
-/* Set Led off in case of disassociation */
-static int iwl3945_led_disassociate(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "Disassociated\n");
-
-	priv->allow_blinking = 0;
-
-	return 0;
-}
-
-/*
- * brightness call back function for Tx/Rx LED
- */
-static int iwl3945_led_associated(struct iwl_priv *priv, int led_id)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    !test_bit(STATUS_READY, &priv->status))
-		return 0;
-
-
-	/* start counting Tx/Rx bytes */
-	if (!priv->last_blink_time && priv->allow_blinking)
-		priv->last_blink_time = jiffies;
-	return 0;
-}
-
-/*
- * brightness call back for association and radio
- */
-static void iwl3945_led_brightness_set(struct led_classdev *led_cdev,
-				enum led_brightness brightness)
-{
-	struct iwl_led *led = container_of(led_cdev,
-					   struct iwl_led, led_dev);
-	struct iwl_priv *priv = led->priv;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
-			led_type_str[led->type], brightness);
-
-	switch (brightness) {
-	case LED_FULL:
-		if (led->led_on)
-			led->led_on(priv, IWL_LED_LINK);
-		break;
-	case LED_OFF:
-		if (led->led_off)
-			led->led_off(priv, IWL_LED_LINK);
-		break;
-	default:
-		if (led->led_pattern) {
-			int idx = iwl3945_brightness_to_idx(brightness);
-			led->led_pattern(priv, IWL_LED_LINK, idx);
-		}
-		break;
-	}
-}
-
-/*
- * Register led class with the system
- */
-static int iwl3945_led_register_led(struct iwl_priv *priv,
-				   struct iwl_led *led,
-				   enum led_type type, u8 set_led,
-				   char *trigger)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret;
-
-	led->led_dev.name = led->name;
-	led->led_dev.brightness_set = iwl3945_led_brightness_set;
-	led->led_dev.default_trigger = trigger;
-
-	led->priv = priv;
-	led->type = type;
-
-	ret = led_classdev_register(device, &led->led_dev);
-	if (ret) {
-		IWL_ERR(priv, "Error: failed to register led handler.\n");
-		return ret;
-	}
-
-	led->registered = 1;
-
-	if (set_led && led->led_on)
-		led->led_on(priv, IWL_LED_LINK);
-	return 0;
-}
-
-
-/*
- * calculate blink rate according to last 2 sec Tx/Rx activities
- */
-static inline u8 get_blink_rate(struct iwl_priv *priv)
-{
-	int index;
-	s64 tpt = priv->rxtxpackets;
-
-	if (tpt < 0)
-		tpt = -tpt;
-
-	IWL_DEBUG_LED(priv, "tpt %lld \n", (long long)tpt);
-
-	if (!priv->allow_blinking)
-		index = IWL_MAX_BLINK_TBL;
-	else
-		for (index = 0; index < IWL_MAX_BLINK_TBL; index++)
-			if (tpt > (blink_tbl[index].brightness * IWL_1MB_RATE))
-				break;
-
-	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", index);
-	return index;
-}
-
-/*
- * this function called from handler. Since setting Led command can
- * happen very frequent we postpone led command to be called from
- * REPLY handler so we know ucode is up
- */
-void iwl3945_led_background(struct iwl_priv *priv)
-{
-	u8 blink_idx;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status)) {
-		priv->last_blink_time = 0;
-		return;
-	}
-	if (iwl_is_rfkill(priv)) {
-		priv->last_blink_time = 0;
-		return;
-	}
-
-	if (!priv->allow_blinking) {
-		priv->last_blink_time = 0;
-		if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) {
-			priv->last_blink_rate = IWL_SOLID_BLINK_IDX;
-			iwl3945_led_pattern(priv, IWL_LED_LINK,
-					    IWL_SOLID_BLINK_IDX);
-		}
-		return;
-	}
-	if (!priv->last_blink_time ||
-	    !time_after(jiffies, priv->last_blink_time +
-			msecs_to_jiffies(1000)))
-		return;
-
-	blink_idx = get_blink_rate(priv);
-
-	/* call only if blink rate change */
-	if (blink_idx != priv->last_blink_rate)
-		iwl3945_led_pattern(priv, IWL_LED_LINK, blink_idx);
-
-	priv->last_blink_time = jiffies;
-	priv->last_blink_rate = blink_idx;
-	priv->rxtxpackets = 0;
-}
-
-
-/* Register all led handler */
-int iwl3945_led_register(struct iwl_priv *priv)
-{
-	char *trigger;
-	int ret;
-
-	priv->last_blink_rate = 0;
-	priv->rxtxpackets = 0;
-	priv->led_tpt = 0;
-	priv->last_blink_time = 0;
-	priv->allow_blinking = 0;
-
-	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
-		 wiphy_name(priv->hw->wiphy));
-
-	priv->led[IWL_LED_TRG_RADIO].led_on = iwl3945_led_on;
-	priv->led[IWL_LED_TRG_RADIO].led_off = iwl3945_led_off;
-	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, trigger);
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, trigger);
-
-	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl3945_led_associate;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl3945_led_disassociate;
-	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s::RX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_RX].led_on = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_off = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_pattern = iwl3945_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s::TX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl3945_led_register_led(priv,
-				   &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_TX].led_on = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_off = iwl3945_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_pattern = iwl3945_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	return 0;
-
-exit_fail:
-	iwl3945_led_unregister(priv);
-	return ret;
-}
-
-
-/* unregister led class */
-static void iwl3945_led_unregister_led(struct iwl_led *led, u8 set_led)
-{
-	if (!led->registered)
-		return;
-
-	led_classdev_unregister(&led->led_dev);
-
-	if (set_led)
-		led->led_dev.brightness_set(&led->led_dev, LED_OFF);
-	led->registered = 0;
-}
-
-/* Unregister all led handlers */
-void iwl3945_led_unregister(struct iwl_priv *priv)
-{
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_ASSOC], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_RX], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_TX], 0);
-	iwl3945_led_unregister_led(&priv->led[IWL_LED_TRG_RADIO], 1);
-}
-
-#endif
+const struct iwl_led_ops iwl3945_led_ops = {
+	.cmd = iwl3945_send_led_cmd,
+	.on = iwl3945_led_on,
+	.off = iwl3945_led_off,
+};
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.h b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
index 3b65642..5a1033c 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.h
@@ -24,23 +24,9 @@
  *
  *****************************************************************************/
 
-#ifndef IWL3945_LEDS_H
-#define IWL3945_LEDS_H
+#ifndef __iwl_3945_led_h__
+#define __iwl_3945_led_h__
 
-struct iwl_priv;
+extern const struct iwl_led_ops iwl3945_led_ops;
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
-#include "iwl-led.h"
-
-extern int iwl3945_led_register(struct iwl_priv *priv);
-extern void iwl3945_led_unregister(struct iwl_priv *priv);
-extern void iwl3945_led_background(struct iwl_priv *priv);
-
-#else
-static inline int iwl3945_led_register(struct iwl_priv *priv) { return 0; }
-static inline void iwl3945_led_unregister(struct iwl_priv *priv) {}
-static inline void iwl3945_led_background(struct iwl_priv *priv) {}
-
-#endif /* IWLWIFI_LEDS*/
-#endif /* IWL3945_LEDS_H */
+#endif /* __iwl_3945_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index 231c833..09a7bd2 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -46,7 +46,8 @@
 #include "iwl-eeprom.h"
 #include "iwl-helpers.h"
 #include "iwl-core.h"
-#include "iwl-agn-rs.h"
+#include "iwl-led.h"
+#include "iwl-3945-led.h"
 
 #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np)    \
 	[IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,   \
@@ -292,7 +293,7 @@
 static void iwl3945_rx_reply_tx(struct iwl_priv *priv,
 			    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -352,16 +353,12 @@
 void iwl3945_hw_rx_statistics(struct iwl_priv *priv,
 		struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(struct iwl3945_notif_statistics),
 		     le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 	memcpy(&priv->statistics_39, pkt->u.raw, sizeof(priv->statistics_39));
-
-	iwl3945_led_background(priv);
-
-	priv->last_statistics_time = jiffies;
 }
 
 /******************************************************************************
@@ -544,14 +541,18 @@
 				   struct iwl_rx_mem_buffer *rxb,
 				   struct ieee80211_rx_status *stats)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IWL_RX_DATA(pkt);
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
-	short len = le16_to_cpu(rx_hdr->len);
+	u16 len = le16_to_cpu(rx_hdr->len);
+	struct sk_buff *skb;
+	int ret;
+	__le16 fc = hdr->frame_control;
 
 	/* We received data from the HW, so stop the watchdog */
-	if (unlikely((len + IWL39_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) {
+	if (unlikely(len + IWL39_RX_FRAME_SIZE >
+		     PAGE_SIZE << priv->hw_params.rx_page_order)) {
 		IWL_DEBUG_DROP(priv, "Corruption detected!\n");
 		return;
 	}
@@ -563,24 +564,49 @@
 		return;
 	}
 
-	skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt);
-	/* Set the size of the skb to the size of the frame */
-	skb_put(rxb->skb, le16_to_cpu(rx_hdr->len));
+	skb = alloc_skb(IWL_LINK_HDR_MAX, GFP_ATOMIC);
+	if (!skb) {
+		IWL_ERR(priv, "alloc_skb failed\n");
+		return;
+	}
 
 	if (!iwl3945_mod_params.sw_crypto)
 		iwl_set_decrypted_flag(priv,
-				       (struct ieee80211_hdr *)rxb->skb->data,
+				       (struct ieee80211_hdr *)rxb_addr(rxb),
 				       le32_to_cpu(rx_end->status), stats);
 
-#ifdef CONFIG_IWLWIFI_LEDS
-	if (ieee80211_is_data(hdr->frame_control))
-		priv->rxtxpackets += len;
-#endif
-	iwl_update_stats(priv, false, hdr->frame_control, len);
+	skb_add_rx_frag(skb, 0, rxb->page,
+			(void *)rx_hdr->payload - (void *)pkt, len);
 
-	memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
-	ieee80211_rx_irqsafe(priv->hw, rxb->skb);
-	rxb->skb = NULL;
+	/* mac80211 currently doesn't support paged SKB. Convert it to
+	 * linear SKB for management frame and data frame requires
+	 * software decryption or software defragementation. */
+	if (ieee80211_is_mgmt(fc) ||
+	    ieee80211_has_protected(fc) ||
+	    ieee80211_has_morefrags(fc) ||
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+		ret = skb_linearize(skb);
+	else
+		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
+			0 : -ENOMEM;
+
+	if (ret) {
+		kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * XXX: We cannot touch the page and its virtual memory (pkt) after
+	 * here. It might have already been freed by the above skb change.
+	 */
+
+	iwl_update_stats(priv, false, fc, len);
+	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+	ieee80211_rx(priv->hw, skb);
+ out:
+	priv->alloc_rxb_page--;
+	rxb->page = NULL;
 }
 
 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
@@ -590,7 +616,7 @@
 {
 	struct ieee80211_hdr *header;
 	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl3945_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt);
 	struct iwl3945_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt);
 	struct iwl3945_rx_frame_end *rx_end = IWL_RX_END(pkt);
@@ -790,29 +816,31 @@
 	u8 data_retry_limit;
 	__le32 tx_flags;
 	__le16 fc = hdr->frame_control;
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
 
 	rate = iwl3945_rates[rate_index].plcp;
-	tx_flags = tx->tx_flags;
+	tx_flags = tx_cmd->tx_flags;
 
 	/* We need to figure out how to get the sta->supp_rates while
 	 * in this running context */
 	rate_mask = IWL_RATES_MASK;
 
+
+	/* Set retry limit on DATA packets and Probe Responses*/
+	if (ieee80211_is_probe_resp(fc))
+		data_retry_limit = 3;
+	else
+		data_retry_limit = IWL_DEFAULT_TX_RETRY;
+	tx_cmd->data_retry_limit = data_retry_limit;
+
 	if (tx_id >= IWL_CMD_QUEUE_NUM)
 		rts_retry_limit = 3;
 	else
 		rts_retry_limit = 7;
 
-	if (ieee80211_is_probe_resp(fc)) {
-		data_retry_limit = 3;
-		if (data_retry_limit < rts_retry_limit)
-			rts_retry_limit = data_retry_limit;
-	} else
-		data_retry_limit = IWL_DEFAULT_TX_RETRY;
-
-	if (priv->data_retry_limit != -1)
-		data_retry_limit = priv->data_retry_limit;
+	if (data_retry_limit < rts_retry_limit)
+		rts_retry_limit = data_retry_limit;
+	tx_cmd->rts_retry_limit = rts_retry_limit;
 
 	if (ieee80211_is_mgmt(fc)) {
 		switch (fc & cpu_to_le16(IEEE80211_FCTL_STYPE)) {
@@ -830,22 +858,20 @@
 		}
 	}
 
-	tx->rts_retry_limit = rts_retry_limit;
-	tx->data_retry_limit = data_retry_limit;
-	tx->rate = rate;
-	tx->tx_flags = tx_flags;
+	tx_cmd->rate = rate;
+	tx_cmd->tx_flags = tx_flags;
 
 	/* OFDM */
-	tx->supp_rates[0] =
+	tx_cmd->supp_rates[0] =
 	   ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF;
 
 	/* CCK */
-	tx->supp_rates[1] = (rate_mask & 0xF);
+	tx_cmd->supp_rates[1] = (rate_mask & 0xF);
 
 	IWL_DEBUG_RATE(priv, "Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
 		       "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
-		       tx->rate, le32_to_cpu(tx->tx_flags),
-		       tx->supp_rates[1], tx->supp_rates[0]);
+		       tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
+		       tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
 }
 
 u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags)
@@ -961,6 +987,11 @@
 
 	iwl3945_hw_txq_ctx_free(priv);
 
+	/* allocate tx queue structure */
+	rc = iwl_alloc_txq_mem(priv);
+	if (rc)
+		return rc;
+
 	/* Tx CMD queue */
 	rc = iwl3945_tx_reset(priv);
 	if (rc)
@@ -985,41 +1016,25 @@
 	return rc;
 }
 
+
+/*
+ * Start up 3945's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
+ * NOTE:  This does not load uCode nor start the embedded processor
+ */
 static int iwl3945_apm_init(struct iwl_priv *priv)
 {
-	int ret;
+	int ret = iwl_apm_init(priv);
 
-	iwl_power_initialize(priv);
+	/* Clear APMG (NIC's internal power management) interrupts */
+	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
+	iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
 
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+	/* Reset radio chip */
+	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
+	udelay(5);
+	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ);
 
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* set "initialization complete" bit to move adapter
-	* D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			    CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-						APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
 	return ret;
 }
 
@@ -1144,12 +1159,16 @@
 	int txq_id;
 
 	/* Tx queues */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		if (txq_id == IWL_CMD_QUEUE_NUM)
-			iwl_cmd_queue_free(priv);
-		else
-			iwl_tx_queue_free(priv, txq_id);
+	if (priv->txq)
+		for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
+		     txq_id++)
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				iwl_cmd_queue_free(priv);
+			else
+				iwl_tx_queue_free(priv, txq_id);
 
+	/* free tx queue structure */
+	iwl_free_txq_mem(priv);
 }
 
 void iwl3945_hw_txq_ctx_stop(struct iwl_priv *priv)
@@ -1158,6 +1177,7 @@
 
 	/* stop SCD */
 	iwl_write_prph(priv, ALM_SCD_MODE_REG, 0);
+	iwl_write_prph(priv, ALM_SCD_TXFACT_REG, 0);
 
 	/* reset TFD queues */
 	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++) {
@@ -1170,85 +1190,6 @@
 	iwl3945_hw_txq_ctx_free(priv);
 }
 
-static int iwl3945_apm_stop_master(struct iwl_priv *priv)
-{
-	int ret = 0;
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-			    CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	if (ret < 0)
-		goto out;
-
-out:
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return ret;
-}
-
-static void iwl3945_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl3945_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int iwl3945_apm_reset(struct iwl_priv *priv)
-{
-	iwl3945_apm_stop_master(priv);
-
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-	udelay(10);
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			 CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG,
-				APMG_CLK_VAL_BSM_CLK_RQT);
-
-	iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0);
-	iwl_write_prph(priv, APMG_RTC_INT_STT_REG,
-					0xFFFFFFFF);
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG,
-				APMG_CLK_VAL_DMA_CLK_RQT |
-				APMG_CLK_VAL_BSM_CLK_RQT);
-	udelay(10);
-
-	iwl_set_bits_prph(priv, APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_VAL_RESET_REQ);
-	udelay(5);
-	iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
-				APMG_PS_CTRL_VAL_RESET_REQ);
-
-	/* Clear the 'host command active' bit... */
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-
-	wake_up_interruptible(&priv->wait_command_queue);
-
-	return 0;
-}
-
 /**
  * iwl3945_hw_reg_adjust_power_by_temp
  * return index delta into power gain settings table
@@ -1857,7 +1798,7 @@
 static int iwl3945_send_rxon_assoc(struct iwl_priv *priv)
 {
 	int rc = 0;
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt;
 	struct iwl3945_rxon_assoc_cmd rxon_assoc;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_RXON_ASSOC,
@@ -1886,14 +1827,14 @@
 	if (rc)
 		return rc;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_RXON_ASSOC command\n");
 		rc = -EIO;
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return rc;
 }
@@ -2041,12 +1982,6 @@
 	return 0;
 }
 
-/* will add 3945 channel switch cmd handling later */
-int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel)
-{
-	return 0;
-}
-
 /**
  * iwl3945_reg_txpower_periodic -  called when time to check our temperature.
  *
@@ -2556,11 +2491,10 @@
 	}
 
 	/* Assign number of Usable TX queues */
-	priv->hw_params.max_txq_num = IWL39_NUM_QUEUES;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 
 	priv->hw_params.tfd_size = sizeof(struct iwl3945_tfd);
-	priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_3K;
-	priv->hw_params.max_pkt_size = 2342;
+	priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_3K);
 	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
 	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
 	priv->hw_params.max_stations = IWL3945_STATION_COUNT;
@@ -2843,8 +2777,7 @@
 	.dump_nic_error_log = iwl3945_dump_nic_error_log,
 	.apm_ops = {
 		.init = iwl3945_apm_init,
-		.reset = iwl3945_apm_reset,
-		.stop = iwl3945_apm_stop,
+		.stop = iwl_apm_stop,
 		.config = iwl3945_nic_config,
 		.set_pwr_src = iwl3945_set_pwr_src,
 	},
@@ -2873,6 +2806,7 @@
 static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = {
 	.get_hcmd_size = iwl3945_get_hcmd_size,
 	.build_addsta_hcmd = iwl3945_build_addsta_hcmd,
+	.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
 };
 
 static struct iwl_ops iwl3945_ops = {
@@ -2880,6 +2814,7 @@
 	.lib = &iwl3945_lib,
 	.hcmd = &iwl3945_hcmd,
 	.utils = &iwl3945_hcmd_utils,
+	.led = &iwl3945_led_ops,
 };
 
 static struct iwl_cfg iwl3945_bg_cfg = {
@@ -2891,9 +2826,14 @@
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
+	.num_of_queues = IWL39_NUM_QUEUES,
 	.mod_params = &iwl3945_mod_params,
+	.pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+	.set_l0s = false,
+	.use_bsm = true,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
+	.led_compensation = 64,
 };
 
 static struct iwl_cfg iwl3945_abg_cfg = {
@@ -2905,9 +2845,11 @@
 	.eeprom_size = IWL3945_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_3945_EEPROM_VERSION,
 	.ops = &iwl3945_ops,
+	.num_of_queues = IWL39_NUM_QUEUES,
 	.mod_params = &iwl3945_mod_params,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
+	.led_compensation = 64,
 };
 
 struct pci_device_id iwl3945_hw_card_ids[] = {
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h
index 21679bf..ebb999a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.h
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.h
@@ -46,7 +46,7 @@
 #include "iwl-debug.h"
 #include "iwl-power.h"
 #include "iwl-dev.h"
-#include "iwl-3945-led.h"
+#include "iwl-led.h"
 
 /* Highest firmware API version supported */
 #define IWL3945_UCODE_API_MAX 2
@@ -130,12 +130,6 @@
 #define SN_TO_SEQ(ssn) (((ssn) << 4) & IEEE80211_SCTL_SEQ)
 #define MAX_SN ((IEEE80211_SCTL_SEQ) >> 4)
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
@@ -280,8 +274,6 @@
  */
 extern u8 iwl3945_hw_find_station(struct iwl_priv *priv, const u8 *bssid);
 
-extern int iwl3945_hw_channel_switch(struct iwl_priv *priv, u16 channel);
-
 /*
  * Forward declare iwl-3945.c functions for iwl-base.c
  */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
index b34322a..c606366 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-hw.h
@@ -76,12 +76,9 @@
 
 /*
  * uCode queue management definitions ...
- * Queue #4 is the command queue for 3945 and 4965; map it to Tx FIFO chnl 4.
  * The first queue used for block-ack aggregation is #7 (4965 only).
  * All block-ack aggregation queues should map to Tx DMA/FIFO channel 7.
  */
-#define IWL_CMD_QUEUE_NUM       4
-#define IWL_CMD_FIFO_NUM        4
 #define IWL49_FIRST_AMPDU_QUEUE	7
 
 /* Time constants */
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index a22a050..1ff465a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -44,6 +44,7 @@
 #include "iwl-helpers.h"
 #include "iwl-calib.h"
 #include "iwl-sta.h"
+#include "iwl-agn-led.h"
 
 static int iwl4965_send_tx_power(struct iwl_priv *priv);
 static int iwl4965_hw_get_temperature(struct iwl_priv *priv);
@@ -61,8 +62,6 @@
 
 /* module parameters */
 static struct iwl_mod_params iwl4965_mod_params = {
-	.num_of_queues = IWL49_NUM_QUEUES,
-	.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
 	.amsdu_size_8K = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -318,63 +317,13 @@
 	iwl_write_prph(priv, IWL49_SCD_TXFACT, mask);
 }
 
-static int iwl4965_apm_init(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-						APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-out:
-	return ret;
-}
-
-
 static void iwl4965_nic_config(struct iwl_priv *priv)
 {
 	unsigned long flags;
 	u16 radio_cfg;
-	u16 lctl;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	lctl = iwl_pcie_link_ctl(priv);
-
-	/* HW bug W/A - negligible power consumption */
-	/* L1-ASPM is enabled by BIOS */
-	if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* L1-ASPM enabled: disable L0S  */
-		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-	else
-		/* L1-ASPM disabled: enable L0S */
-		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 
 	/* write radio config values to register */
@@ -395,79 +344,6 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
-static int iwl4965_apm_stop_master(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return 0;
-}
-
-static void iwl4965_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl4965_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int iwl4965_apm_reset(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl4965_apm_stop_master(priv);
-
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-	/* FIXME: put here L1A -L0S w/a */
-
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0)
-		goto out;
-
-	udelay(10);
-
-	/* Enable DMA and BSM Clock */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT |
-					      APMG_CLK_VAL_BSM_CLK_RQT);
-
-	udelay(10);
-
-	/* disable L1A */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
-	wake_up_interruptible(&priv->wait_command_queue);
-
-out:
-	return ret;
-}
-
 /* Reset differential Rx gains in NIC to prepare for chain noise calibration.
  * Called after every association, but this runs only once!
  *  ... once chain noise is calibrated the first time, it's good forever.  */
@@ -495,14 +371,15 @@
 static void iwl4965_gain_computation(struct iwl_priv *priv,
 		u32 *average_noise,
 		u16 min_average_noise_antenna_i,
-		u32 min_average_noise)
+		u32 min_average_noise,
+		u8 default_chain)
 {
 	int i, ret;
 	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 
 	data->delta_gain_code[min_average_noise_antenna_i] = 0;
 
-	for (i = 0; i < NUM_RX_CHAINS; i++) {
+	for (i = default_chain; i < NUM_RX_CHAINS; i++) {
 		s32 delta_g = 0;
 
 		if (!(data->disconn_array[i]) &&
@@ -556,18 +433,6 @@
 	data->beacon_count = 0;
 }
 
-static void iwl4965_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
-			__le32 *tx_flags)
-{
-	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		*tx_flags |= TX_CMD_FLG_RTS_MSK;
-		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		*tx_flags |= TX_CMD_FLG_CTS_MSK;
-	}
-}
-
 static void iwl4965_bg_txpower_work(struct work_struct *work)
 {
 	struct iwl_priv *priv = container_of(work, struct iwl_priv,
@@ -662,7 +527,8 @@
 		iwl_write_targ_mem(priv, a, 0);
 	for (; a < priv->scd_base_addr + IWL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
 		iwl_write_targ_mem(priv, a, 0);
-	for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
+	for (; a < priv->scd_base_addr +
+	       IWL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
 		iwl_write_targ_mem(priv, a, 0);
 
 	/* Tel 4965 where to find Tx byte count tables */
@@ -747,6 +613,10 @@
 
 	.nrg_th_cck = 100,
 	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 static void iwl4965_set_ct_threshold(struct iwl_priv *priv)
@@ -763,19 +633,16 @@
  */
 static int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
 {
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL49_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
 
-	if ((priv->cfg->mod_params->num_of_queues > IWL49_NUM_QUEUES) ||
-	    (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
-		IWL_ERR(priv,
-			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL49_NUM_QUEUES);
-		return -EINVAL;
-	}
-
-	priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 	priv->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
 	priv->hw_params.scd_bc_tbls_size =
-			IWL49_NUM_QUEUES * sizeof(struct iwl4965_scd_bc_tbl);
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl4965_scd_bc_tbl);
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWL4965_STATION_COUNT;
 	priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
@@ -786,10 +653,10 @@
 
 	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
 
-	priv->hw_params.tx_chains_num = 2;
-	priv->hw_params.rx_chains_num = 2;
-	priv->hw_params.valid_tx_ant = ANT_A | ANT_B;
-	priv->hw_params.valid_rx_ant = ANT_A | ANT_B;
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
 	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
 		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
 
@@ -1566,14 +1433,13 @@
 	return ret;
 }
 
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
 static int iwl4965_hw_channel_switch(struct iwl_priv *priv, u16 channel)
 {
 	int rc;
 	u8 band = 0;
 	bool is_ht40 = false;
 	u8 ctrl_chan_high = 0;
-	struct iwl4965_channel_switch_cmd cmd = { 0 };
+	struct iwl4965_channel_switch_cmd cmd;
 	const struct iwl_channel_info *ch_info;
 
 	band = priv->band == IEEE80211_BAND_2GHZ;
@@ -1594,8 +1460,11 @@
 	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
 	if (ch_info)
 		cmd.expect_beacon = is_channel_radar(ch_info);
-	else
-		cmd.expect_beacon = 1;
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
 
 	rc = iwl4965_fill_txpower_tbl(priv, band, channel, is_ht40,
 				      ctrl_chan_high, &cmd.tx_power);
@@ -1607,7 +1476,6 @@
 	rc = iwl_send_cmd_pdu(priv, REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
 	return rc;
 }
-#endif
 
 /**
  * iwl4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
@@ -1804,11 +1672,13 @@
 				   u16 ssn_idx, u8 tx_fifo)
 {
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL49_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
+			IWL49_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1869,11 +1739,13 @@
 	u16 ra_tid;
 
 	if ((IWL49_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL49_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL49_FIRST_AMPDU_QUEUE,
-			IWL49_FIRST_AMPDU_QUEUE + IWL49_NUM_AMPDU_QUEUES - 1);
+			IWL49_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -2077,7 +1949,7 @@
 static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -2278,7 +2150,7 @@
 	.build_addsta_hcmd = iwl4965_build_addsta_hcmd,
 	.chain_noise_reset = iwl4965_chain_noise_reset,
 	.gain_computation = iwl4965_gain_computation,
-	.rts_tx_cmd_flag = iwl4965_rts_tx_cmd_flag,
+	.rts_tx_cmd_flag = iwlcore_rts_tx_cmd_flag,
 	.calc_rssi = iwl4965_calc_rssi,
 };
 
@@ -2300,10 +2172,10 @@
 	.load_ucode = iwl4965_load_bsm,
 	.dump_nic_event_log = iwl_dump_nic_event_log,
 	.dump_nic_error_log = iwl_dump_nic_error_log,
+	.set_channel_switch = iwl4965_hw_channel_switch,
 	.apm_ops = {
-		.init = iwl4965_apm_init,
-		.reset = iwl4965_apm_reset,
-		.stop = iwl4965_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl4965_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -2339,6 +2211,7 @@
 	.lib = &iwl4965_lib,
 	.hcmd = &iwl4965_hcmd,
 	.utils = &iwl4965_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_cfg iwl4965_agn_cfg = {
@@ -2351,30 +2224,40 @@
 	.eeprom_ver = EEPROM_4965_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
 	.ops = &iwl4965_ops,
+	.num_of_queues = IWL49_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL49_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl4965_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = 0,
+	.set_l0s = true,
+	.use_bsm = true,
 	.use_isr_legacy = true,
 	.ht_greenfield_support = false,
 	.broken_powersave = true,
+	.led_compensation = 61,
+	.chain_noise_num_beacons = IWL4965_CAL_NUM_BEACONS,
 };
 
 /* Module firmware */
 MODULE_FIRMWARE(IWL4965_MODULE_FIRMWARE(IWL4965_UCODE_API_MAX));
 
-module_param_named(antenna, iwl4965_mod_params.antenna, int, 0444);
+module_param_named(antenna, iwl4965_mod_params.antenna, int, S_IRUGO);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, 0444);
+module_param_named(swcrypto, iwl4965_mod_params.sw_crypto, int, S_IRUGO);
 MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
 module_param_named(
-	disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, 0444);
+	disable_hw_scan, iwl4965_mod_params.disable_hw_scan, int, S_IRUGO);
 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
 
-module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, 0444);
+module_param_named(queues_num, iwl4965_mod_params.num_of_queues, int, S_IRUGO);
 MODULE_PARM_DESC(queues_num, "number of hw queues.");
 /* 11n */
-module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, 0444);
+module_param_named(11n_disable, iwl4965_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K, int, 0444);
+module_param_named(amsdu_size_8K, iwl4965_mod_params.amsdu_size_8K,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
 
-module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart4965, iwl4965_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart4965, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index 524e7e4..d256fec 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -42,6 +42,7 @@
 #include "iwl-io.h"
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
+#include "iwl-agn-led.h"
 #include "iwl-5000-hw.h"
 #include "iwl-6000-hw.h"
 
@@ -71,157 +72,18 @@
 	IWL_TX_FIFO_HCCA_2
 };
 
-/* FIXME: same implementation as 4965 */
-static int iwl5000_apm_stop_master(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	/* set stop master bit */
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
-
-	iwl_poll_direct_bit(priv, CSR_RESET,
-				  CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-	IWL_DEBUG_INFO(priv, "stop master\n");
-
-	return 0;
-}
-
-
-int iwl5000_apm_init(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-		    CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
-
-	/* disable L0s without affecting L1 :don't wait for ICH L0s bug W/A) */
-	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
-		    CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
-
-	/* Set FH wait threshold to maximum (HW error during stress W/A) */
-	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
-
-	/* enable HAP INTA to move device L1a -> L0s */
-	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
-		    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
-
-	if (priv->cfg->need_pll_cfg)
-		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		return ret;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-
-	return ret;
-}
-
-/* FIXME: this is identical to 4965 */
-void iwl5000_apm_stop(struct iwl_priv *priv)
-{
-	unsigned long flags;
-
-	iwl5000_apm_stop_master(priv);
-
-	spin_lock_irqsave(&priv->lock, flags);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-	/* clear "init complete"  move adapter D0A* --> D0U state */
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-
-int iwl5000_apm_reset(struct iwl_priv *priv)
-{
-	int ret = 0;
-
-	iwl5000_apm_stop_master(priv);
-
-	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
-
-	udelay(10);
-
-
-	/* FIXME: put here L1A -L0S w/a */
-
-	if (priv->cfg->need_pll_cfg)
-		iwl_set_bit(priv, CSR_ANA_PLL_CFG, CSR50_ANA_PLL_CFG_VAL);
-
-	/* set "initialization complete" bit to move adapter
-	 * D0U* --> D0A* state */
-	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
-
-	/* wait for clock stabilization */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
-			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
-	if (ret < 0) {
-		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
-		goto out;
-	}
-
-	/* enable DMA */
-	iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT);
-
-	udelay(20);
-
-	/* disable L1-Active */
-	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
-			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
-out:
-
-	return ret;
-}
-
-
-/* NIC configuration for 5000 series and up */
+/* NIC configuration for 5000 series */
 void iwl5000_nic_config(struct iwl_priv *priv)
 {
 	unsigned long flags;
 	u16 radio_cfg;
-	u16 lctl;
 
 	spin_lock_irqsave(&priv->lock, flags);
 
-	lctl = iwl_pcie_link_ctl(priv);
-
-	/* HW bug W/A */
-	/* L1-ASPM is enabled by BIOS */
-	if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) == PCI_CFG_LINK_CTRL_VAL_L1_EN)
-		/* L1-APSM enabled: disable L0S  */
-		iwl_set_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-	else
-		/* L1-ASPM disabled: enable L0S */
-		iwl_clear_bit(priv, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
-
 	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
 
 	/* write radio config values to register */
-	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_5000_RF_CFG_TYPE_MAX)
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) < EEPROM_RF_CONFIG_TYPE_MAX)
 		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
 			    EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
 			    EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
@@ -301,19 +163,22 @@
 static void iwl5000_gain_computation(struct iwl_priv *priv,
 		u32 average_noise[NUM_RX_CHAINS],
 		u16 min_average_noise_antenna_i,
-		u32 min_average_noise)
+		u32 min_average_noise,
+		u8 default_chain)
 {
 	int i;
 	s32 delta_g;
 	struct iwl_chain_noise_data *data = &priv->chain_noise_data;
 
-	/* Find Gain Code for the antennas B and C */
-	for (i = 1; i < NUM_RX_CHAINS; i++) {
+	/*
+	 * Find Gain Code for the chains based on "default chain"
+	 */
+	for (i = default_chain + 1; i < NUM_RX_CHAINS; i++) {
 		if ((data->disconn_array[i])) {
 			data->delta_gain_code[i] = 0;
 			continue;
 		}
-		delta_g = (1000 * ((s32)average_noise[0] -
+		delta_g = (1000 * ((s32)average_noise[default_chain] -
 			(s32)average_noise[i])) / 1500;
 		/* bound gain by 2 bits value max, 3rd bit is sign */
 		data->delta_gain_code[i] =
@@ -406,6 +271,10 @@
 	.auto_corr_max_cck_mrc = 400,
 	.nrg_th_cck = 95,
 	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 static struct iwl_sensitivity_ranges iwl5150_sensitivity = {
@@ -428,6 +297,10 @@
 	.auto_corr_max_cck_mrc = 400,
 	.nrg_th_cck = 95,
 	.nrg_th_ofdm = 95,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
 };
 
 const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
@@ -492,7 +365,7 @@
 static void iwl5000_rx_calib_result(struct iwl_priv *priv,
 			     struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_calib_hdr *hdr = (struct iwl_calib_hdr *)pkt->u.raw;
 	int len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
 	int index;
@@ -745,7 +618,8 @@
 	for (; a < priv->scd_base_addr + IWL50_SCD_TRANSLATE_TBL_OFFSET;
 		a += 4)
 		iwl_write_targ_mem(priv, a, 0);
-	for (; a < sizeof(u16) * priv->hw_params.max_txq_num; a += 4)
+	for (; a < priv->scd_base_addr +
+	       IWL50_SCD_TRANSLATE_TBL_OFFSET_QUEUE(priv->hw_params.max_txq_num); a += 4)
 		iwl_write_targ_mem(priv, a, 0);
 
 	iwl_write_prph(priv, IWL50_SCD_DRAM_BASE_ADDR,
@@ -817,32 +691,22 @@
 
 int iwl5000_hw_set_hw_params(struct iwl_priv *priv)
 {
-	if ((priv->cfg->mod_params->num_of_queues > IWL50_NUM_QUEUES) ||
-	    (priv->cfg->mod_params->num_of_queues < IWL_MIN_NUM_QUEUES)) {
-		IWL_ERR(priv,
-			"invalid queues_num, should be between %d and %d\n",
-			IWL_MIN_NUM_QUEUES, IWL50_NUM_QUEUES);
-		return -EINVAL;
-	}
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
 
-	priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
 	priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
 	priv->hw_params.scd_bc_tbls_size =
-			IWL50_NUM_QUEUES * sizeof(struct iwl5000_scd_bc_tbl);
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl5000_scd_bc_tbl);
 	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
 	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
 	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
-		priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
-		priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
-		break;
-	default:
-		priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
-		priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
-	}
+	priv->hw_params.max_data_size = IWL50_RTC_DATA_SIZE;
+	priv->hw_params.max_inst_size = IWL50_RTC_INST_SIZE;
 
 	priv->hw_params.max_bsm_size = 0;
 	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
@@ -988,11 +852,13 @@
 	u16 ra_tid;
 
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_WARN(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL50_FIRST_AMPDU_QUEUE,
-			IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
+			IWL50_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1046,11 +912,13 @@
 				   u16 ssn_idx, u8 tx_fifo)
 {
 	if ((IWL50_FIRST_AMPDU_QUEUE > txq_id) ||
-	    (IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES <= txq_id)) {
+	    (IWL50_FIRST_AMPDU_QUEUE + priv->cfg->num_of_ampdu_queues
+	     <= txq_id)) {
 		IWL_ERR(priv,
 			"queue number out of range: %d, must be %d to %d\n",
 			txq_id, IWL50_FIRST_AMPDU_QUEUE,
-			IWL50_FIRST_AMPDU_QUEUE + IWL50_NUM_AMPDU_QUEUES - 1);
+			IWL50_FIRST_AMPDU_QUEUE +
+			priv->cfg->num_of_ampdu_queues - 1);
 		return -EINVAL;
 	}
 
@@ -1217,7 +1085,7 @@
 static void iwl5000_rx_reply_tx(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -1458,6 +1326,24 @@
 	return max_rssi - agc - IWL49_RSSI_OFFSET;
 }
 
+static int iwl5000_send_tx_ant_config(struct iwl_priv *priv, u8 valid_tx_ant)
+{
+	struct iwl_tx_ant_config_cmd tx_ant_cmd = {
+	  .valid = cpu_to_le32(valid_tx_ant),
+	};
+
+	if (IWL_UCODE_API(priv->ucode_ver) > 1) {
+		IWL_DEBUG_HC(priv, "select valid tx ant: %u\n", valid_tx_ant);
+		return iwl_send_cmd_pdu(priv, TX_ANT_CONFIGURATION_CMD,
+					sizeof(struct iwl_tx_ant_config_cmd),
+					&tx_ant_cmd);
+	} else {
+		IWL_DEBUG_HC(priv, "TX_ANT_CONFIGURATION_CMD not supported\n");
+		return -EOPNOTSUPP;
+	}
+}
+
+
 #define IWL5000_UCODE_GET(item)						\
 static u32 iwl5000_ucode_get_##item(const struct iwl_ucode_header *ucode,\
 				    u32 api_ver)			\
@@ -1496,10 +1382,41 @@
 IWL5000_UCODE_GET(init_data_size);
 IWL5000_UCODE_GET(boot_size);
 
+static int iwl5000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+{
+	struct iwl5000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = sizeof(cmd),
+		.flags = CMD_SIZE_HUGE,
+		.data = &cmd,
+	};
+
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		priv->active_rxon.channel, channel);
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	cmd.channel = cpu_to_le16(channel);
+	cmd.rxon_flags = priv->active_rxon.flags;
+	cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
+	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, channel);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
+
+	return iwl_send_cmd_sync(priv, &hcmd);
+}
+
 struct iwl_hcmd_ops iwl5000_hcmd = {
 	.rxon_assoc = iwl5000_send_rxon_assoc,
 	.commit_rxon = iwl_commit_rxon,
 	.set_rxon_chain = iwl_set_rxon_chain,
+	.set_tx_ant = iwl5000_send_tx_ant_config,
 };
 
 struct iwl_hcmd_utils_ops iwl5000_hcmd_utils = {
@@ -1542,10 +1459,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -1594,10 +1511,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl5000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl5000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -1626,11 +1543,12 @@
 	 },
 };
 
-struct iwl_ops iwl5000_ops = {
+static struct iwl_ops iwl5000_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl5000_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 static struct iwl_ops iwl5150_ops = {
@@ -1638,11 +1556,10 @@
 	.lib = &iwl5150_lib,
 	.hcmd = &iwl5000_hcmd,
 	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 struct iwl_mod_params iwl50_mod_params = {
-	.num_of_queues = IWL50_NUM_QUEUES,
-	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.amsdu_size_8K = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -1659,11 +1576,17 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5100_bg_cfg = {
@@ -1676,11 +1599,17 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5100_abg_cfg = {
@@ -1693,11 +1622,17 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5100_agn_cfg = {
@@ -1710,11 +1645,17 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_B,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5350_agn_cfg = {
@@ -1727,11 +1668,17 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 struct iwl_cfg iwl5150_agn_cfg = {
@@ -1744,24 +1691,31 @@
 	.eeprom_size = IWL_5000_EEPROM_IMG_SIZE,
 	.eeprom_ver = EEPROM_5050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5050_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_A,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = true,
+	.pll_cfg_val = CSR50_ANA_PLL_CFG_VAL,
+	.set_l0s = true,
+	.use_bsm = false,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
 };
 
 MODULE_FIRMWARE(IWL5000_MODULE_FIRMWARE(IWL5000_UCODE_API_MAX));
 MODULE_FIRMWARE(IWL5150_MODULE_FIRMWARE(IWL5150_UCODE_API_MAX));
 
-module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, 0444);
+module_param_named(swcrypto50, iwl50_mod_params.sw_crypto, bool, S_IRUGO);
 MODULE_PARM_DESC(swcrypto50,
 		  "using software crypto engine (default 0 [hardware])\n");
-module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, 0444);
+module_param_named(queues_num50, iwl50_mod_params.num_of_queues, int, S_IRUGO);
 MODULE_PARM_DESC(queues_num50, "number of hw queues in 50xx series");
-module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, 0444);
+module_param_named(11n_disable50, iwl50_mod_params.disable_11n, int, S_IRUGO);
 MODULE_PARM_DESC(11n_disable50, "disable 50XX 11n functionality");
-module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K, int, 0444);
+module_param_named(amsdu_size_8K50, iwl50_mod_params.amsdu_size_8K,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(amsdu_size_8K50, "enable 8K amsdu size in 50XX series");
-module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart50, iwl50_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart50, "restart firmware in case of error");
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index c295b8e..32466d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -44,14 +44,16 @@
 #include "iwl-sta.h"
 #include "iwl-helpers.h"
 #include "iwl-5000-hw.h"
+#include "iwl-6000-hw.h"
+#include "iwl-agn-led.h"
 
 /* Highest firmware API version supported */
 #define IWL6000_UCODE_API_MAX 4
 #define IWL6050_UCODE_API_MAX 4
 
 /* Lowest firmware API version supported */
-#define IWL6000_UCODE_API_MIN 1
-#define IWL6050_UCODE_API_MIN 1
+#define IWL6000_UCODE_API_MIN 4
+#define IWL6050_UCODE_API_MIN 4
 
 #define IWL6000_FW_PRE "iwlwifi-6000-"
 #define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
@@ -71,7 +73,21 @@
 /* NIC configuration for 6000 series */
 static void iwl6000_nic_config(struct iwl_priv *priv)
 {
-	iwl5000_nic_config(priv);
+	u16 radio_cfg;
+
+	radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
+
+	/* write radio config values to register */
+	if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
+		iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+			    EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
+			    EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
+			    EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+
+	/* set CSR_HW_CONFIG_REG for uCode use */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+		    CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+		    CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
 
 	/* no locking required for register write */
 	if (priv->cfg->pa_type == IWL_PA_HYBRID) {
@@ -86,8 +102,109 @@
 	/* else do nothing, uCode configured */
 }
 
+static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
+	.min_nrg_cck = 97,
+	.max_nrg_cck = 0, /* not used, set to 0 */
+	.auto_corr_min_ofdm = 80,
+	.auto_corr_min_ofdm_mrc = 128,
+	.auto_corr_min_ofdm_x1 = 105,
+	.auto_corr_min_ofdm_mrc_x1 = 192,
+
+	.auto_corr_max_ofdm = 145,
+	.auto_corr_max_ofdm_mrc = 232,
+	.auto_corr_max_ofdm_x1 = 145,
+	.auto_corr_max_ofdm_mrc_x1 = 232,
+
+	.auto_corr_min_cck = 125,
+	.auto_corr_max_cck = 175,
+	.auto_corr_min_cck_mrc = 160,
+	.auto_corr_max_cck_mrc = 310,
+	.nrg_th_cck = 97,
+	.nrg_th_ofdm = 100,
+
+	.barker_corr_th_min = 190,
+	.barker_corr_th_min_mrc = 390,
+	.nrg_th_cca = 62,
+};
+
+static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
+{
+	if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
+	    priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
+		priv->cfg->num_of_queues =
+			priv->cfg->mod_params->num_of_queues;
+
+	priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
+	priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
+	priv->hw_params.scd_bc_tbls_size =
+			priv->cfg->num_of_queues *
+			sizeof(struct iwl5000_scd_bc_tbl);
+	priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
+	priv->hw_params.max_stations = IWL5000_STATION_COUNT;
+	priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
+
+	priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
+	priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
+
+	priv->hw_params.max_bsm_size = 0;
+	priv->hw_params.ht40_channel =  BIT(IEEE80211_BAND_2GHZ) |
+					BIT(IEEE80211_BAND_5GHZ);
+	priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+	priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
+	priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
+	priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
+	priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
+
+	if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
+		priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
+
+	/* Set initial sensitivity parameters */
+	/* Set initial calibration set */
+	priv->hw_params.sens = &iwl6000_sensitivity;
+	priv->hw_params.calib_init_cfg =
+			BIT(IWL_CALIB_XTAL)		|
+			BIT(IWL_CALIB_LO)		|
+			BIT(IWL_CALIB_TX_IQ) 		|
+			BIT(IWL_CALIB_TX_IQ_PERD)	|
+			BIT(IWL_CALIB_BASE_BAND);
+
+	return 0;
+}
+
+static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
+{
+	struct iwl6000_channel_switch_cmd cmd;
+	const struct iwl_channel_info *ch_info;
+	struct iwl_host_cmd hcmd = {
+		.id = REPLY_CHANNEL_SWITCH,
+		.len = sizeof(cmd),
+		.flags = CMD_SIZE_HUGE,
+		.data = &cmd,
+	};
+
+	IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
+		priv->active_rxon.channel, channel);
+
+	cmd.band = priv->band == IEEE80211_BAND_2GHZ;
+	cmd.channel = cpu_to_le16(channel);
+	cmd.rxon_flags = priv->active_rxon.flags;
+	cmd.rxon_filter_flags = priv->active_rxon.filter_flags;
+	cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
+	ch_info = iwl_get_channel_info(priv, priv->band, channel);
+	if (ch_info)
+		cmd.expect_beacon = is_channel_radar(ch_info);
+	else {
+		IWL_ERR(priv, "invalid channel switch from %u to %u\n",
+			priv->active_rxon.channel, channel);
+		return -EFAULT;
+	}
+
+	return iwl_send_cmd_sync(priv, &hcmd);
+}
+
 static struct iwl_lib_ops iwl6000_lib = {
-	.set_hw_params = iwl5000_hw_set_hw_params,
+	.set_hw_params = iwl6000_hw_set_hw_params,
 	.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
 	.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
 	.txq_set_sched = iwl5000_txq_set_sched,
@@ -106,10 +223,10 @@
 	.alive_notify = iwl5000_alive_notify,
 	.send_tx_power = iwl5000_send_tx_power,
 	.update_chain_flags = iwl_update_chain_flags,
+	.set_channel_switch = iwl6000_hw_channel_switch,
 	.apm_ops = {
-		.init =	iwl5000_apm_init,
-		.reset = iwl5000_apm_reset,
-		.stop = iwl5000_apm_stop,
+		.init = iwl_apm_init,
+		.stop = iwl_apm_stop,
 		.config = iwl6000_nic_config,
 		.set_pwr_src = iwl_set_pwr_src,
 	},
@@ -139,18 +256,27 @@
 	 },
 };
 
-static struct iwl_hcmd_utils_ops iwl6000_hcmd_utils = {
+static struct iwl_ops iwl6000_ops = {
+	.ucode = &iwl5000_ucode,
+	.lib = &iwl6000_lib,
+	.hcmd = &iwl5000_hcmd,
+	.utils = &iwl5000_hcmd_utils,
+	.led = &iwlagn_led_ops,
+};
+
+static struct iwl_hcmd_utils_ops iwl6050_hcmd_utils = {
 	.get_hcmd_size = iwl5000_get_hcmd_size,
 	.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
 	.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
 	.calc_rssi = iwl5000_calc_rssi,
 };
 
-static struct iwl_ops iwl6000_ops = {
+static struct iwl_ops iwl6050_ops = {
 	.ucode = &iwl5000_ucode,
 	.lib = &iwl6000_lib,
 	.hcmd = &iwl5000_hcmd,
-	.utils = &iwl6000_hcmd_utils,
+	.utils = &iwl6050_hcmd_utils,
+	.led = &iwlagn_led_ops,
 };
 
 
@@ -165,16 +291,84 @@
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
 	.pa_type = IWL_PA_HYBRID,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6000h_2abg_cfg = {
+	.name = "6000 Series 2x2 ABG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
+	.pa_type = IWL_PA_HYBRID,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6000h_2bg_cfg = {
+	.name = "6000 Series 2x2 BG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
+	.pa_type = IWL_PA_HYBRID,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 /*
@@ -188,16 +382,84 @@
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_BC,
 	.valid_rx_ant = ANT_BC,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
 	.pa_type = IWL_PA_INTERNAL,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6000i_2abg_cfg = {
+	.name = "6000 Series 2x2 ABG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
+	.pa_type = IWL_PA_INTERNAL,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6000i_2bg_cfg = {
+	.name = "6000 Series 2x2 BG",
+	.fw_name_pre = IWL6000_FW_PRE,
+	.ucode_api_max = IWL6000_UCODE_API_MAX,
+	.ucode_api_min = IWL6000_UCODE_API_MIN,
+	.sku = IWL_SKU_G,
+	.ops = &iwl6000_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_BC,
+	.valid_rx_ant = ANT_BC,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
+	.pa_type = IWL_PA_INTERNAL,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 struct iwl_cfg iwl6050_2agn_cfg = {
@@ -206,18 +468,57 @@
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
+	.ops = &iwl6050_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_AB,
 	.valid_rx_ant = ANT_AB,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
-	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
+};
+
+struct iwl_cfg iwl6050_2abg_cfg = {
+	.name = "6050 Series 2x2 ABG",
+	.fw_name_pre = IWL6050_FW_PRE,
+	.ucode_api_max = IWL6050_UCODE_API_MAX,
+	.ucode_api_min = IWL6050_UCODE_API_MIN,
+	.sku = IWL_SKU_A|IWL_SKU_G,
+	.ops = &iwl6050_ops,
+	.eeprom_size = OTP_LOW_IMAGE_SIZE,
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
+	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
+	.mod_params = &iwl50_mod_params,
+	.valid_tx_ant = ANT_AB,
+	.valid_rx_ant = ANT_AB,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
+	.pa_type = IWL_PA_SYSTEM,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
+	.shadow_ram_support = true,
+	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 struct iwl_cfg iwl6000_3agn_cfg = {
@@ -228,16 +529,26 @@
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
 	.ops = &iwl6000_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
 	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 struct iwl_cfg iwl6050_3agn_cfg = {
@@ -246,18 +557,28 @@
 	.ucode_api_max = IWL6050_UCODE_API_MAX,
 	.ucode_api_min = IWL6050_UCODE_API_MIN,
 	.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
-	.ops = &iwl6000_ops,
+	.ops = &iwl6050_ops,
 	.eeprom_size = OTP_LOW_IMAGE_SIZE,
-	.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
+	.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
 	.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
+	.num_of_queues = IWL50_NUM_QUEUES,
+	.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
 	.mod_params = &iwl50_mod_params,
 	.valid_tx_ant = ANT_ABC,
 	.valid_rx_ant = ANT_ABC,
-	.need_pll_cfg = false,
+	.pll_cfg_val = 0,
+	.set_l0s = false,
+	.use_bsm = false,
 	.pa_type = IWL_PA_SYSTEM,
-	.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
+	.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
 	.shadow_ram_support = true,
 	.ht_greenfield_support = true,
+	.led_compensation = 51,
+	.use_rts_for_ht = true, /* use rts/cts protection */
+	.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
+	.supports_idle = true,
+	.adv_thermal_throttle = true,
+	.support_ct_kill_exit = true,
 };
 
 MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.c b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
new file mode 100644
index 0000000..3bccba2
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.c
@@ -0,0 +1,85 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+
+#include "iwl-commands.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-agn-led.h"
+
+/* Send led command */
+static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
+{
+	struct iwl_host_cmd cmd = {
+		.id = REPLY_LEDS_CMD,
+		.len = sizeof(struct iwl_led_cmd),
+		.data = led_cmd,
+		.flags = CMD_ASYNC,
+		.callback = NULL,
+	};
+	u32 reg;
+
+	reg = iwl_read32(priv, CSR_LED_REG);
+	if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
+		iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
+
+	return iwl_send_cmd(priv, &cmd);
+}
+
+/* Set led register off */
+static int iwl_led_on_reg(struct iwl_priv *priv)
+{
+	IWL_DEBUG_LED(priv, "led on\n");
+	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
+	return 0;
+}
+
+/* Set led register off */
+static int iwl_led_off_reg(struct iwl_priv *priv)
+{
+	IWL_DEBUG_LED(priv, "LED Reg off\n");
+	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
+	return 0;
+}
+
+const struct iwl_led_ops iwlagn_led_ops = {
+	.cmd = iwl_send_led_cmd,
+	.on = iwl_led_on_reg,
+	.off = iwl_led_off_reg,
+};
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-led.h b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
new file mode 100644
index 0000000..ab55f92
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-led.h
@@ -0,0 +1,32 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ *  Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#ifndef __iwl_agn_led_h__
+#define __iwl_agn_led_h__
+
+extern const struct iwl_led_ops iwlagn_led_ops;
+
+#endif /* __iwl_agn_led_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
index 346dc06..27d4ece 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c
@@ -75,104 +75,6 @@
 	/*ANT_ABC  -> */ ANT_ABC,
 };
 
-/**
- * struct iwl_rate_scale_data -- tx success history for one rate
- */
-struct iwl_rate_scale_data {
-	u64 data;		/* bitmap of successful frames */
-	s32 success_counter;	/* number of frames successful */
-	s32 success_ratio;	/* per-cent * 128  */
-	s32 counter;		/* number of frames attempted */
-	s32 average_tpt;	/* success ratio * expected throughput */
-	unsigned long stamp;
-};
-
-/**
- * struct iwl_scale_tbl_info -- tx params and success history for all rates
- *
- * There are two of these in struct iwl_lq_sta,
- * one for "active", and one for "search".
- */
-struct iwl_scale_tbl_info {
-	enum iwl_table_type lq_type;
-	u8 ant_type;
-	u8 is_SGI;	/* 1 = short guard interval */
-	u8 is_ht40;	/* 1 = 40 MHz channel width */
-	u8 is_dup;	/* 1 = duplicated data streams */
-	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
-	u8 max_search;	/* maximun number of tables we can search */
-	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
-	u32 current_rate;  /* rate_n_flags, uCode API format */
-	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
-};
-
-struct iwl_traffic_load {
-	unsigned long time_stamp;	/* age of the oldest statistics */
-	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
-						 * slice */
-	u32 total;			/* total num of packets during the
-					 * last TID_MAX_TIME_DIFF */
-	u8 queue_count;			/* number of queues that has
-					 * been used since the last cleanup */
-	u8 head;			/* start of the circular buffer */
-};
-
-/**
- * struct iwl_lq_sta -- driver's rate scaling private structure
- *
- * Pointer to this gets passed back and forth between driver and mac80211.
- */
-struct iwl_lq_sta {
-	u8 active_tbl;		/* index of active table, range 0-1 */
-	u8 enable_counter;	/* indicates HT mode */
-	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
-	u8 search_better_tbl;	/* 1: currently trying alternate mode */
-	s32 last_tpt;
-
-	/* The following determine when to search for a new mode */
-	u32 table_count_limit;
-	u32 max_failure_limit;	/* # failed frames before new search */
-	u32 max_success_limit;	/* # successful frames before new search */
-	u32 table_count;
-	u32 total_failed;	/* total failed frames, any/all rates */
-	u32 total_success;	/* total successful frames, any/all rates */
-	u64 flush_timer;	/* time staying in mode before new search */
-
-	u8 action_counter;	/* # mode-switch actions tried */
-	u8 is_green;
-	u8 is_dup;
-	enum ieee80211_band band;
-	u8 ibss_sta_added;
-
-	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
-	u32 supp_rates;
-	u16 active_legacy_rate;
-	u16 active_siso_rate;
-	u16 active_mimo2_rate;
-	u16 active_mimo3_rate;
-	u16 active_rate_basic;
-	s8 max_rate_idx;     /* Max rate set by user */
-	u8 missed_rate_counter;
-
-	struct iwl_link_quality_cmd lq;
-	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
-	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
-	u8 tx_agg_tid_en;
-#ifdef CONFIG_MAC80211_DEBUGFS
-	struct dentry *rs_sta_dbgfs_scale_table_file;
-	struct dentry *rs_sta_dbgfs_stats_table_file;
-	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
-	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
-	u32 dbg_fixed_rate;
-#endif
-	struct iwl_priv *drv;
-
-	/* used to be in sta_info */
-	int last_txrate_idx;
-	/* last tx rate_n_flags */
-	u32 last_rate_n_flags;
-};
-
 static void rs_rate_scale_perform(struct iwl_priv *priv,
 				   struct sk_buff *skb,
 				   struct ieee80211_sta *sta,
@@ -190,84 +92,78 @@
 {}
 #endif
 
-/*
- * Expected throughput metrics for following rates:
- * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
- * "G" is the only table that supports CCK (the first 4 rates).
+/**
+ * The following tables contain the expected throughput metrics for all rates
+ *
+ *	1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits
+ *
+ * where invalid entries are zeros.
+ *
+ * CCK rates are only valid in legacy table and will only be used in G
+ * (2.4 GHz) band.
  */
 
-static s32 expected_tpt_A[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 40, 57, 72, 98, 121, 154, 177, 186, 186
+static s32 expected_tpt_legacy[IWL_RATE_COUNT] = {
+	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0
 };
 
-static s32 expected_tpt_G[IWL_RATE_COUNT] = {
-	7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 186
+static s32 expected_tpt_siso20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 42, 0,  76, 102, 124, 158, 183, 193, 202}, /* Norm */
+	{0, 0, 0, 0, 46, 0,  82, 110, 132, 167, 192, 202, 210}, /* SGI */
+	{0, 0, 0, 0, 48, 0,  93, 135, 176, 251, 319, 351, 381}, /* AGG */
+	{0, 0, 0, 0, 53, 0, 102, 149, 193, 275, 348, 381, 413}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 42, 42, 76, 102, 124, 159, 183, 193, 202
+static s32 expected_tpt_siso40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  77, 0, 127, 160, 184, 220, 242, 250, 257}, /* Norm */
+	{0, 0, 0, 0,  83, 0, 135, 169, 193, 229, 250, 257, 264}, /* SGI */
+	{0, 0, 0, 0,  96, 0, 182, 259, 328, 451, 553, 598, 640}, /* AGG */
+	{0, 0, 0, 0, 106, 0, 199, 282, 357, 487, 593, 640, 683}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 46, 46, 82, 110, 132, 168, 192, 202, 211
+static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  74, 0, 123, 155, 179, 213, 235, 243, 250}, /* Norm */
+	{0, 0, 0, 0,  81, 0, 131, 164, 187, 221, 242, 250, 256}, /* SGI */
+	{0, 0, 0, 0,  92, 0, 175, 250, 317, 436, 534, 578, 619}, /* AGG */
+	{0, 0, 0, 0, 102, 0, 192, 273, 344, 470, 573, 619, 660}, /* AGG+SGI*/
 };
 
-static s32 expected_tpt_mimo2_20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 74, 74, 123, 155, 179, 214, 236, 244, 251
+static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289}, /* Norm */
+	{0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293}, /* SGI */
+	{0, 0, 0, 0, 180, 0, 327, 446, 545, 708, 828, 878, 922}, /* AGG */
+	{0, 0, 0, 0, 197, 0, 355, 481, 584, 752, 872, 922, 966}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_mimo2_20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 81, 81, 131, 164, 188, 222, 243, 251, 257
+static s32 expected_tpt_mimo3_20MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0,  99, 0, 153, 186, 208, 239, 256, 263, 268}, /* Norm */
+	{0, 0, 0, 0, 106, 0, 162, 194, 215, 246, 262, 268, 273}, /* SGI */
+	{0, 0, 0, 0, 134, 0, 249, 346, 431, 574, 685, 732, 775}, /* AGG */
+	{0, 0, 0, 0, 148, 0, 272, 376, 465, 614, 727, 775, 818}, /* AGG+SGI */
 };
 
-static s32 expected_tpt_siso40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 77, 77, 127, 160, 184, 220, 242, 250, 257
-};
-
-static s32 expected_tpt_siso40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 83, 83, 135, 169, 193, 229, 250, 257, 264
-};
-
-static s32 expected_tpt_mimo2_40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 123, 123, 182, 214, 235, 264, 279, 285, 289
-};
-
-static s32 expected_tpt_mimo2_40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 131, 131, 191, 222, 242, 270, 284, 289, 293
-};
-
-/* Expected throughput metric MIMO3 */
-static s32 expected_tpt_mimo3_20MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 99, 99, 153, 186, 208, 239, 256, 263, 268
-};
-
-static s32 expected_tpt_mimo3_20MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 106, 106, 162, 194, 215, 246, 262, 268, 273
-};
-
-static s32 expected_tpt_mimo3_40MHz[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 152, 152, 211, 239, 255, 279, 290, 294, 297
-};
-
-static s32 expected_tpt_mimo3_40MHzSGI[IWL_RATE_COUNT] = {
-	0, 0, 0, 0, 160, 160, 219, 245, 261, 284, 294, 297, 300
+static s32 expected_tpt_mimo3_40MHz[4][IWL_RATE_COUNT] = {
+	{0, 0, 0, 0, 152, 0, 211, 239, 255, 279,  290,  294,  297}, /* Norm */
+	{0, 0, 0, 0, 160, 0, 219, 245, 261, 284,  294,  297,  300}, /* SGI */
+	{0, 0, 0, 0, 254, 0, 443, 584, 695, 868,  984, 1030, 1070}, /* AGG */
+	{0, 0, 0, 0, 277, 0, 478, 624, 737, 911, 1026, 1070, 1109}, /* AGG+SGI */
 };
 
 /* mbps, mcs */
 const static struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = {
-  {"1", ""},
-  {"2", ""},
-  {"5.5", ""},
-  {"11", ""},
-  {"6", "BPSK 1/2"},
-  {"9", "BPSK 1/2"},
-  {"12", "QPSK 1/2"},
-  {"18", "QPSK 3/4"},
-  {"24", "16QAM 1/2"},
-  {"36", "16QAM 3/4"},
-  {"48", "64QAM 2/3"},
-  {"54", "64QAM 3/4"},
-  {"60", "64QAM 5/6"}
+	{  "1", "BPSK DSSS"},
+	{  "2", "QPSK DSSS"},
+	{"5.5", "BPSK CCK"},
+	{ "11", "QPSK CCK"},
+	{  "6", "BPSK 1/2"},
+	{  "9", "BPSK 1/2"},
+	{ "12", "QPSK 1/2"},
+	{ "18", "QPSK 3/4"},
+	{ "24", "16QAM 1/2"},
+	{ "36", "16QAM 3/4"},
+	{ "48", "64QAM 2/3"},
+	{ "54", "64QAM 3/4"},
+	{ "60", "64QAM 5/6"},
 };
 
 #define MCS_INDEX_PER_STREAM	(8)
@@ -418,6 +314,15 @@
 	else if (tid == IWL_AGG_ALL_TID)
 		for (tid = 0; tid < TID_MAX_LOAD_COUNT; tid++)
 			rs_tl_turn_on_agg_for_tid(priv, lq_data, tid, sta);
+	if (priv->cfg->use_rts_for_ht) {
+		/*
+		 * switch to RTS/CTS if it is the prefer protection method
+		 * for HT traffic
+		 */
+		IWL_DEBUG_HT(priv, "use RTS/CTS protection for HT\n");
+		priv->staging_rxon.flags &= ~RXON_FLG_SELF_CTS_EN;
+		iwlcore_commit_rxon(priv);
+	}
 }
 
 static inline int get_num_of_ant_from_rate(u32 rate_n_flags)
@@ -435,7 +340,7 @@
  * packets.
  */
 static int rs_collect_tx_data(struct iwl_rate_scale_data *windows,
-			      int scale_index, s32 tpt, int retries,
+			      int scale_index, s32 tpt, int attempts,
 			      int successes)
 {
 	struct iwl_rate_scale_data *window = NULL;
@@ -445,7 +350,7 @@
 	if (scale_index < 0 || scale_index >= IWL_RATE_COUNT)
 		return -EINVAL;
 
-	/* Select data for current tx bit rate */
+	/* Select window for current tx bit rate */
 	window = &(windows[scale_index]);
 
 	/*
@@ -456,7 +361,7 @@
 	 * subtract "1" from the success counter (this is the main reason
 	 * we keep these bitmaps!).
 	 */
-	while (retries > 0) {
+	while (attempts > 0) {
 		if (window->counter >= IWL_RATE_MAX_WINDOW) {
 
 			/* remove earliest */
@@ -471,17 +376,17 @@
 		/* Increment frames-attempted counter */
 		window->counter++;
 
-		/* Shift bitmap by one frame (throw away oldest history),
-		 * OR in "1", and increment "success" if this
-		 * frame was successful. */
+		/* Shift bitmap by one frame to throw away oldest history */
 		window->data <<= 1;
+
+		/* Mark the most recent #successes attempts as successful */
 		if (successes > 0) {
 			window->success_counter++;
 			window->data |= 0x1;
 			successes--;
 		}
 
-		retries--;
+		attempts--;
 	}
 
 	/* Calculate current success ratio, avoid divide-by-0! */
@@ -662,7 +567,7 @@
  * there are no non-GF stations present in the BSS.
  */
 static inline u8 rs_use_green(struct ieee80211_sta *sta,
-			      struct iwl_ht_info *ht_conf)
+			      struct iwl_ht_config *ht_conf)
 {
 	return (sta->ht_cap.cap & IEEE80211_HT_CAP_GRN_FLD) &&
 		!(ht_conf->non_GF_STA_present);
@@ -812,27 +717,45 @@
 }
 
 /*
+ * Simple function to compare two rate scale table types
+ */
+static bool table_type_matches(struct iwl_scale_tbl_info *a,
+			       struct iwl_scale_tbl_info *b)
+{
+	return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) &&
+		(a->is_SGI == b->is_SGI);
+}
+/*
+ * Static function to get the expected throughput from an iwl_scale_tbl_info
+ * that wraps a NULL pointer check
+ */
+static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index)
+{
+	if (tbl->expected_tpt)
+		return tbl->expected_tpt[rs_index];
+	return 0;
+}
+
+/*
  * mac80211 sends us Tx status
  */
 static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband,
 			 struct ieee80211_sta *sta, void *priv_sta,
 			 struct sk_buff *skb)
 {
-	int status;
-	u8 retries;
-	int rs_index, mac_index, index = 0;
+	int legacy_success;
+	int retries;
+	int rs_index, mac_index, i;
 	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_link_quality_cmd *table;
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct iwl_priv *priv = (struct iwl_priv *)priv_r;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct iwl_rate_scale_data *window = NULL;
-	struct iwl_rate_scale_data *search_win = NULL;
 	enum mac80211_rate_control_flags mac_flags;
 	u32 tx_rate;
 	struct iwl_scale_tbl_info tbl_type;
-	struct iwl_scale_tbl_info *curr_tbl, *search_tbl;
-	u8 active_index = 0;
+	struct iwl_scale_tbl_info *curr_tbl, *other_tbl;
 	s32 tpt = 0;
 
 	IWL_DEBUG_RATE_LIMIT(priv, "get frame ack response, update rate scale window\n");
@@ -841,30 +764,14 @@
 	    info->flags & IEEE80211_TX_CTL_NO_ACK)
 		return;
 
-	/* This packet was aggregated but doesn't carry rate scale info */
+	/* This packet was aggregated but doesn't carry status info */
 	if ((info->flags & IEEE80211_TX_CTL_AMPDU) &&
 	    !(info->flags & IEEE80211_TX_STAT_AMPDU))
 		return;
 
-	if (info->flags & IEEE80211_TX_STAT_AMPDU)
-		retries = 0;
-	else
-		retries = info->status.rates[0].count - 1;
-
-	if (retries > 15)
-		retries = 15;
-
 	if ((priv->iw_mode == NL80211_IFTYPE_ADHOC) &&
 	    !lq_sta->ibss_sta_added)
-		goto out;
-
-	table = &lq_sta->lq;
-	active_index = lq_sta->active_tbl;
-
-	curr_tbl = &(lq_sta->lq_info[active_index]);
-	search_tbl = &(lq_sta->lq_info[(1 - active_index)]);
-	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
-	search_win = (struct iwl_rate_scale_data *)&(search_tbl->win[0]);
+		return;
 
 	/*
 	 * Ignore this Tx frame response if its initial rate doesn't match
@@ -874,6 +781,7 @@
 	 * to check "search" mode, or a prior "search" mode after we've moved
 	 * to a new "search" mode (which might become the new "active" mode).
 	 */
+	table = &lq_sta->lq;
 	tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
 	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
 	if (priv->band == IEEE80211_BAND_5GHZ)
@@ -892,7 +800,7 @@
 		if (priv->band == IEEE80211_BAND_2GHZ)
 			mac_index += IWL_FIRST_OFDM_RATE;
 	}
-
+	/* Here we actually compare this rate to the latest LQ command */
 	if ((mac_index < 0) ||
 	    (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) ||
 	    (tbl_type.is_ht40 != !!(mac_flags & IEEE80211_TX_RC_40_MHZ_WIDTH)) ||
@@ -902,124 +810,106 @@
 	    (!!(tx_rate & RATE_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) ||
 	    (rs_index != mac_index)) {
 		IWL_DEBUG_RATE(priv, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate);
-		/* the last LQ command could failed so the LQ in ucode not
-		 * the same in driver sync up
+		/*
+		 * Since rates mis-match, the last LQ command may have failed.
+		 * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with
+		 * ... driver.
 		 */
 		lq_sta->missed_rate_counter++;
 		if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) {
 			lq_sta->missed_rate_counter = 0;
 			iwl_send_lq_cmd(priv, &lq_sta->lq, CMD_ASYNC);
 		}
-		goto out;
+		/* Regardless, ignore this status info for outdated rate */
+		return;
+	} else
+		/* Rate did match, so reset the missed_rate_counter */
+		lq_sta->missed_rate_counter = 0;
+
+	/* Figure out if rate scale algorithm is in active or search table */
+	if (table_type_matches(&tbl_type,
+				&(lq_sta->lq_info[lq_sta->active_tbl]))) {
+		curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+	} else if (table_type_matches(&tbl_type,
+				&lq_sta->lq_info[1 - lq_sta->active_tbl])) {
+		curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]);
+		other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]);
+	} else {
+		IWL_DEBUG_RATE(priv, "Neither active nor search matches tx rate\n");
+		return;
 	}
-
-	lq_sta->missed_rate_counter = 0;
-	/* Update frame history window with "failure" for each Tx retry. */
-	while (retries) {
-		/* Look up the rate and other info used for each tx attempt.
-		 * Each tx attempt steps one entry deeper in the rate table. */
-		tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-		rs_get_tbl_info_from_mcs(tx_rate, priv->band,
-					  &tbl_type, &rs_index);
-
-		/* If type matches "search" table,
-		 * add failure to "search" history */
-		if ((tbl_type.lq_type == search_tbl->lq_type) &&
-		    (tbl_type.ant_type == search_tbl->ant_type) &&
-		    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-			if (search_tbl->expected_tpt)
-				tpt = search_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(search_win, rs_index, tpt, 1, 0);
-
-		/* Else if type matches "current/active" table,
-		 * add failure to "current/active" history */
-		} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-			   (tbl_type.ant_type == curr_tbl->ant_type) &&
-			   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-			if (curr_tbl->expected_tpt)
-				tpt = curr_tbl->expected_tpt[rs_index];
-			else
-				tpt = 0;
-			rs_collect_tx_data(window, rs_index, tpt, 1, 0);
-		}
-
-		/* If not searching for a new mode, increment failed counter
-		 * ... this helps determine when to start searching again */
-		if (lq_sta->stay_in_tbl)
-			lq_sta->total_failed++;
-		--retries;
-		index++;
-
-	}
+	window = (struct iwl_rate_scale_data *)&(curr_tbl->win[0]);
 
 	/*
-	 * Find (by rate) the history window to update with final Tx attempt;
-	 * if Tx was successful first try, use original rate,
-	 * else look up the rate that was, finally, successful.
+	 * Updating the frame history depends on whether packets were
+	 * aggregated.
+	 *
+	 * For aggregation, all packets were transmitted at the same rate, the
+	 * first index into rate scale table.
 	 */
-	tx_rate = le32_to_cpu(table->rs_table[index].rate_n_flags);
-	lq_sta->last_rate_n_flags = tx_rate;
-	rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index);
+	if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+		tx_rate = le32_to_cpu(table->rs_table[0].rate_n_flags);
+		rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type,
+				&rs_index);
+		tpt = get_expected_tpt(curr_tbl, rs_index);
+		rs_collect_tx_data(window, rs_index, tpt,
+				   info->status.ampdu_ack_len,
+				   info->status.ampdu_ack_map);
 
-	/* Update frame history window with "success" if Tx got ACKed ... */
-	status = !!(info->flags & IEEE80211_TX_STAT_ACK);
-
-	/* If type matches "search" table,
-	 * add final tx status to "search" history */
-	if ((tbl_type.lq_type == search_tbl->lq_type) &&
-	    (tbl_type.ant_type == search_tbl->ant_type) &&
-	    (tbl_type.is_SGI == search_tbl->is_SGI)) {
-		if (search_tbl->expected_tpt)
-			tpt = search_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_STAT_AMPDU)
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(search_win, rs_index, tpt,
-					   1, status);
-	/* Else if type matches "current/active" table,
-	 * add final tx status to "current/active" history */
-	} else if ((tbl_type.lq_type == curr_tbl->lq_type) &&
-		   (tbl_type.ant_type == curr_tbl->ant_type) &&
-		   (tbl_type.is_SGI == curr_tbl->is_SGI)) {
-		if (curr_tbl->expected_tpt)
-			tpt = curr_tbl->expected_tpt[rs_index];
-		else
-			tpt = 0;
-		if (info->flags & IEEE80211_TX_STAT_AMPDU)
-			rs_collect_tx_data(window, rs_index, tpt,
-					   info->status.ampdu_ack_len,
-					   info->status.ampdu_ack_map);
-		else
-			rs_collect_tx_data(window, rs_index, tpt,
-					   1, status);
-	}
-
-	/* If not searching for new mode, increment success/failed counter
-	 * ... these help determine when to start searching again */
-	if (lq_sta->stay_in_tbl) {
-		if (info->flags & IEEE80211_TX_STAT_AMPDU) {
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
 			lq_sta->total_success += info->status.ampdu_ack_map;
-			lq_sta->total_failed +=
-			     (info->status.ampdu_ack_len - info->status.ampdu_ack_map);
-		} else {
-			if (status)
-				lq_sta->total_success++;
+			lq_sta->total_failed += (info->status.ampdu_ack_len -
+					info->status.ampdu_ack_map);
+		}
+	} else {
+	/*
+	 * For legacy, update frame history with for each Tx retry.
+	 */
+		retries = info->status.rates[0].count - 1;
+		/* HW doesn't send more than 15 retries */
+		retries = min(retries, 15);
+
+		/* The last transmission may have been successful */
+		legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK);
+		/* Collect data for each rate used during failed TX attempts */
+		for (i = 0; i <= retries; ++i) {
+			tx_rate = le32_to_cpu(table->rs_table[i].rate_n_flags);
+			rs_get_tbl_info_from_mcs(tx_rate, priv->band,
+					&tbl_type, &rs_index);
+			/*
+			 * Only collect stats if retried rate is in the same RS
+			 * table as active/search.
+			 */
+			if (table_type_matches(&tbl_type, curr_tbl))
+				tpt = get_expected_tpt(curr_tbl, rs_index);
+			else if (table_type_matches(&tbl_type, other_tbl))
+				tpt = get_expected_tpt(other_tbl, rs_index);
 			else
-				lq_sta->total_failed++;
+				continue;
+
+			/* Constants mean 1 transmission, 0 successes */
+			if (i < retries)
+				rs_collect_tx_data(window, rs_index, tpt, 1,
+						0);
+			else
+				rs_collect_tx_data(window, rs_index, tpt, 1,
+						legacy_success);
+		}
+
+		/* Update success/fail counts if not searching for new mode */
+		if (lq_sta->stay_in_tbl) {
+			lq_sta->total_success += legacy_success;
+			lq_sta->total_failed += retries + (1 - legacy_success);
 		}
 	}
+	/* The last TX rate is cached in lq_sta; it's set in if/else above */
+	lq_sta->last_rate_n_flags = tx_rate;
 
 	/* See if there's a better rate or modulation mode to try. */
 	if (sta && sta->supp_rates[sband->band])
 		rs_rate_scale_perform(priv, skb, sta, lq_sta);
-out:
-	return;
 }
 
 /*
@@ -1057,43 +947,45 @@
 static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta,
 				      struct iwl_scale_tbl_info *tbl)
 {
+	/* Used to choose among HT tables */
+	s32 (*ht_tbl_pointer)[IWL_RATE_COUNT];
+
+	/* Check for invalid LQ type */
+	if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_Ht(tbl->lq_type))) {
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Legacy rates have only one table */
 	if (is_legacy(tbl->lq_type)) {
-		if (!is_a_band(tbl->lq_type))
-			tbl->expected_tpt = expected_tpt_G;
-		else
-			tbl->expected_tpt = expected_tpt_A;
-	} else if (is_siso(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_siso40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_siso40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_siso20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_siso20MHz;
-	} else if (is_mimo2(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo2_40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_mimo2_40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo2_20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_mimo2_20MHz;
-	} else if (is_mimo3(tbl->lq_type)) {
-		if (tbl->is_ht40 && !lq_sta->is_dup)
-			if (tbl->is_SGI)
-				tbl->expected_tpt = expected_tpt_mimo3_40MHzSGI;
-			else
-				tbl->expected_tpt = expected_tpt_mimo3_40MHz;
-		else if (tbl->is_SGI)
-			tbl->expected_tpt = expected_tpt_mimo3_20MHzSGI;
-		else
-			tbl->expected_tpt = expected_tpt_mimo3_20MHz;
-	} else
-		tbl->expected_tpt = expected_tpt_G;
+		tbl->expected_tpt = expected_tpt_legacy;
+		return;
+	}
+
+	/* Choose among many HT tables depending on number of streams
+	 * (SISO/MIMO2/MIMO3), channel width (20/40), SGI, and aggregation
+	 * status */
+	if (is_siso(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_siso20MHz;
+	else if (is_siso(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_siso40MHz;
+	else if (is_mimo2(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo2_20MHz;
+	else if (is_mimo2(tbl->lq_type))
+		ht_tbl_pointer = expected_tpt_mimo2_40MHz;
+	else if (is_mimo3(tbl->lq_type) && (!tbl->is_ht40 || lq_sta->is_dup))
+		ht_tbl_pointer = expected_tpt_mimo3_20MHz;
+	else /* if (is_mimo3(tbl->lq_type)) <-- must be true */
+		ht_tbl_pointer = expected_tpt_mimo3_40MHz;
+
+	if (!tbl->is_SGI && !lq_sta->is_agg)		/* Normal */
+		tbl->expected_tpt = ht_tbl_pointer[0];
+	else if (tbl->is_SGI && !lq_sta->is_agg)	/* SGI */
+		tbl->expected_tpt = ht_tbl_pointer[1];
+	else if (!tbl->is_SGI && lq_sta->is_agg)	/* AGG */
+		tbl->expected_tpt = ht_tbl_pointer[2];
+	else						/* AGG+SGI */
+		tbl->expected_tpt = ht_tbl_pointer[3];
 }
 
 /*
@@ -2068,6 +1960,14 @@
 	lq_sta->supp_rates = sta->supp_rates[lq_sta->band];
 
 	tid = rs_tl_add_packet(lq_sta, hdr);
+	if ((tid != MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) {
+		tid_data = &priv->stations[lq_sta->lq.sta_id].tid[tid];
+		if (tid_data->agg.state == IWL_AGG_OFF)
+			lq_sta->is_agg = 0;
+		else
+			lq_sta->is_agg = 1;
+	} else
+		lq_sta->is_agg = 0;
 
 	/*
 	 * Select rate-scale / modulation-mode table to work with in
@@ -2168,10 +2068,10 @@
 
 		goto out;
 	}
-
 	/* Else we have enough samples; calculate estimate of
 	 * actual average throughput */
 
+	/* Sanity-check TPT calculations */
 	BUG_ON(window->average_tpt != ((window->success_ratio *
 			tbl->expected_tpt[index] + 64) / 128));
 
@@ -2575,19 +2475,17 @@
 			  gfp_t gfp)
 {
 	struct iwl_lq_sta *lq_sta;
+	struct iwl_station_priv *sta_priv = (struct iwl_station_priv *) sta->drv_priv;
 	struct iwl_priv *priv;
 	int i, j;
 
 	priv = (struct iwl_priv *)priv_rate;
 	IWL_DEBUG_RATE(priv, "create station rate scale window\n");
 
-	lq_sta = kzalloc(sizeof(struct iwl_lq_sta), gfp);
+	lq_sta = &sta_priv->lq_sta;
 
-	if (lq_sta == NULL)
-		return NULL;
 	lq_sta->lq.sta_id = 0xff;
 
-
 	for (j = 0; j < LQ_SIZE; j++)
 		for (i = 0; i < IWL_RATE_COUNT; i++)
 			rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]);
@@ -2681,6 +2579,7 @@
 	lq_sta->last_txrate_idx = rate_lowest_index(sband, sta);
 	if (sband->band == IEEE80211_BAND_5GHZ)
 		lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE;
+	lq_sta->is_agg = 0;
 
 	rs_initialize_lq(priv, conf, sta, lq_sta);
 }
@@ -2799,7 +2698,7 @@
 		repeat_rate--;
 	}
 
-	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_MAX;
+	lq_cmd->agg_params.agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
 	lq_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
 	lq_cmd->agg_params.agg_time_limit =
 		cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);
@@ -2818,11 +2717,9 @@
 static void rs_free_sta(void *priv_r, struct ieee80211_sta *sta,
 			void *priv_sta)
 {
-	struct iwl_lq_sta *lq_sta = priv_sta;
 	struct iwl_priv *priv __maybe_unused = priv_r;
 
 	IWL_DEBUG_RATE(priv, "enter\n");
-	kfree(lq_sta);
 	IWL_DEBUG_RATE(priv, "leave\n");
 }
 
@@ -2933,8 +2830,9 @@
 		   ((is_mimo2(tbl->lq_type)) ? "MIMO2" : "MIMO3"));
 		   desc += sprintf(buff+desc, " %s",
 		   (tbl->is_ht40) ? "40MHz" : "20MHz");
-		   desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "",
-		   (lq_sta->is_green) ? "GF enabled" : "");
+		   desc += sprintf(buff+desc, " %s %s %s\n", (tbl->is_SGI) ? "SGI" : "",
+		   (lq_sta->is_green) ? "GF enabled" : "",
+		   (lq_sta->is_agg) ? "AGG on" : "");
 	}
 	desc += sprintf(buff+desc, "last tx rate=0x%X\n",
 		lq_sta->last_rate_n_flags);
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
index 9fac530..affc0c5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
@@ -54,6 +54,7 @@
 	u8 prev_table_rs;	/* prev in rate table cmd */
 };
 
+
 /*
  * These serve as indexes into
  * struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
@@ -335,6 +336,106 @@
 	char	mcs[IWL_MAX_MCS_DISPLAY_SIZE];
 };
 
+/**
+ * struct iwl_rate_scale_data -- tx success history for one rate
+ */
+struct iwl_rate_scale_data {
+	u64 data;		/* bitmap of successful frames */
+	s32 success_counter;	/* number of frames successful */
+	s32 success_ratio;	/* per-cent * 128  */
+	s32 counter;		/* number of frames attempted */
+	s32 average_tpt;	/* success ratio * expected throughput */
+	unsigned long stamp;
+};
+
+/**
+ * struct iwl_scale_tbl_info -- tx params and success history for all rates
+ *
+ * There are two of these in struct iwl_lq_sta,
+ * one for "active", and one for "search".
+ */
+struct iwl_scale_tbl_info {
+	enum iwl_table_type lq_type;
+	u8 ant_type;
+	u8 is_SGI;	/* 1 = short guard interval */
+	u8 is_ht40;	/* 1 = 40 MHz channel width */
+	u8 is_dup;	/* 1 = duplicated data streams */
+	u8 action;	/* change modulation; IWL_[LEGACY/SISO/MIMO]_SWITCH_* */
+	u8 max_search;	/* maximun number of tables we can search */
+	s32 *expected_tpt;	/* throughput metrics; expected_tpt_G, etc. */
+	u32 current_rate;  /* rate_n_flags, uCode API format */
+	struct iwl_rate_scale_data win[IWL_RATE_COUNT]; /* rate histories */
+};
+
+struct iwl_traffic_load {
+	unsigned long time_stamp;	/* age of the oldest statistics */
+	u32 packet_count[TID_QUEUE_MAX_SIZE];   /* packet count in this time
+						 * slice */
+	u32 total;			/* total num of packets during the
+					 * last TID_MAX_TIME_DIFF */
+	u8 queue_count;			/* number of queues that has
+					 * been used since the last cleanup */
+	u8 head;			/* start of the circular buffer */
+};
+
+/**
+ * struct iwl_lq_sta -- driver's rate scaling private structure
+ *
+ * Pointer to this gets passed back and forth between driver and mac80211.
+ */
+struct iwl_lq_sta {
+	u8 active_tbl;		/* index of active table, range 0-1 */
+	u8 enable_counter;	/* indicates HT mode */
+	u8 stay_in_tbl;		/* 1: disallow, 0: allow search for new mode */
+	u8 search_better_tbl;	/* 1: currently trying alternate mode */
+	s32 last_tpt;
+
+	/* The following determine when to search for a new mode */
+	u32 table_count_limit;
+	u32 max_failure_limit;	/* # failed frames before new search */
+	u32 max_success_limit;	/* # successful frames before new search */
+	u32 table_count;
+	u32 total_failed;	/* total failed frames, any/all rates */
+	u32 total_success;	/* total successful frames, any/all rates */
+	u64 flush_timer;	/* time staying in mode before new search */
+
+	u8 action_counter;	/* # mode-switch actions tried */
+	u8 is_green;
+	u8 is_dup;
+	enum ieee80211_band band;
+	u8 ibss_sta_added;
+
+	/* The following are bitmaps of rates; IWL_RATE_6M_MASK, etc. */
+	u32 supp_rates;
+	u16 active_legacy_rate;
+	u16 active_siso_rate;
+	u16 active_mimo2_rate;
+	u16 active_mimo3_rate;
+	u16 active_rate_basic;
+	s8 max_rate_idx;     /* Max rate set by user */
+	u8 missed_rate_counter;
+
+	struct iwl_link_quality_cmd lq;
+	struct iwl_scale_tbl_info lq_info[LQ_SIZE]; /* "active", "search" */
+	struct iwl_traffic_load load[TID_MAX_LOAD_COUNT];
+	u8 tx_agg_tid_en;
+#ifdef CONFIG_MAC80211_DEBUGFS
+	struct dentry *rs_sta_dbgfs_scale_table_file;
+	struct dentry *rs_sta_dbgfs_stats_table_file;
+	struct dentry *rs_sta_dbgfs_rate_scale_data_file;
+	struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
+	u32 dbg_fixed_rate;
+#endif
+	struct iwl_priv *drv;
+
+	/* used to be in sta_info */
+	int last_txrate_idx;
+	/* last tx rate_n_flags */
+	u32 last_rate_n_flags;
+	/* packets destined for this STA are aggregated */
+	u8 is_agg;
+};
+
 static inline u8 num_of_ant(u8 mask)
 {
 	return  !!((mask) & ANT_A) +
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 9b5ea8b..fa1672e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -115,9 +115,6 @@
 
 	/* always get timestamp with Rx frame */
 	priv->staging_rxon.flags |= RXON_FLG_TSF2HOST_MSK;
-	/* allow CTS-to-self if possible. this is relevant only for
-	 * 5000, but will not damage 4965 */
-	priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
 
 	ret = iwl_check_rxon_cmd(priv);
 	if (ret) {
@@ -217,6 +214,13 @@
 					"Could not send WEP static key.\n");
 		}
 
+		/*
+		 * allow CTS-to-self if possible for new association.
+		 * this is relevant only for 5000 series and up,
+		 * but will not damage 4965
+		 */
+		priv->staging_rxon.flags |= RXON_FLG_SELF_CTS_EN;
+
 		/* Apply the new configuration
 		 * RXON assoc doesn't clear the station table in uCode,
 		 */
@@ -520,7 +524,7 @@
 static void iwl_rx_reply_alive(struct iwl_priv *priv,
 				struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_alive_resp *palive;
 	struct delayed_work *pwork;
 
@@ -606,7 +610,7 @@
 				struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl4965_beacon_notif *beacon =
 		(struct iwl4965_beacon_notif *)pkt->u.raw;
 	u8 rate = iwl_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
@@ -630,7 +634,7 @@
 static void iwl_rx_card_state_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
@@ -765,7 +769,7 @@
 		IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
 
 	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - priv->rxq.write_actual;
+	total_empty = r - rxq->write_actual;
 	if (total_empty < 0)
 		total_empty += RX_QUEUE_SIZE;
 
@@ -782,10 +786,13 @@
 
 		rxq->queue[i] = NULL;
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				 priv->hw_params.rx_buf_size + 256,
-				 PCI_DMA_FROMDEVICE);
-		pkt = (struct iwl_rx_packet *)rxb->skb->data;
+		pci_unmap_page(priv->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << priv->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		trace_iwlwifi_dev_rx(priv, pkt,
+			le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 		/* Reclaim a command buffer only if this packet is a response
 		 *   to a (driver-originated) command.
@@ -807,8 +814,8 @@
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
 				i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
 			IWL_DEBUG_RX(priv,
@@ -817,35 +824,45 @@
 				pkt->hdr.cmd);
 		}
 
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
 		if (reclaim) {
-			/* Invoke any callbacks, transfer the skb to caller, and
-			 * fire off the (possibly) blocking iwl_send_cmd()
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking iwl_send_cmd()
 			 * as we reclaim the driver command queue */
-			if (rxb && rxb->skb)
+			if (rxb->page)
 				iwl_tx_cmd_complete(priv, rxb);
 			else
 				IWL_WARN(priv, "Claim null rxb?\n");
 		}
 
-		/* For now we just don't re-use anything.  We can tweak this
-		 * later to try and re-use notification packets and SKBs that
-		 * fail to Rx correctly */
-		if (rxb->skb != NULL) {
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb_any(rxb->skb);
-			rxb->skb = NULL;
-		}
-
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
 		spin_lock_irqsave(&rxq->lock, flags);
-		list_add_tail(&rxb->list, &priv->rxq.rx_used);
+		if (rxb->page != NULL) {
+			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
+				0, PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
+
 		i = (i + 1) & RX_QUEUE_MASK;
 		/* If there are a lot of unused frames,
 		 * restock the Rx queue so ucode wont assert. */
 		if (fill_rx) {
 			count++;
 			if (count >= 8) {
-				priv->rxq.read = i;
+				rxq->read = i;
 				iwl_rx_replenish_now(priv);
 				count = 0;
 			}
@@ -853,7 +870,7 @@
 	}
 
 	/* Backtrack one entry */
-	priv->rxq.read = i;
+	rxq->read = i;
 	if (fill_rx)
 		iwl_rx_replenish_now(priv);
 	else
@@ -900,6 +917,8 @@
 	}
 #endif
 
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
 	 * atomic, make sure that inta covers all the interrupts that
 	 * we've discovered, even if FH interrupt came in just after
@@ -921,8 +940,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -1012,6 +1029,7 @@
 	if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
 		iwl_rx_handle(priv);
 		priv->isr_stats.rx++;
+		iwl_leds_background(priv);
 		handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
 	}
 
@@ -1049,7 +1067,6 @@
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 /* tasklet for iwlagn interrupt */
@@ -1079,6 +1096,9 @@
 				inta, inta_mask);
 	}
 #endif
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* saved interrupt in inta variable now we can reset priv->inta */
 	priv->inta = 0;
 
@@ -1094,8 +1114,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -1213,6 +1231,7 @@
 				    CSR_INT_PERIODIC_ENA);
 
 		priv->isr_stats.rx++;
+		iwl_leds_background(priv);
 	}
 
 	if (inta & CSR_INT_BIT_FH_TX) {
@@ -1235,14 +1254,10 @@
 			 inta & ~priv->inta_mask);
 	}
 
-
 	/* Re-enable all interrupts */
 	/* only Re-enable if diabled by irq */
 	if (test_bit(STATUS_INT_ENABLED, &priv->status))
 		iwl_enable_interrupts(priv);
-
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 }
 
 
@@ -1606,6 +1621,9 @@
 	line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
 	time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
 
+	trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, data2, line,
+				      blink1, blink2, ilink1, ilink2);
+
 	IWL_ERR(priv, "Desc                               Time       "
 		"data1      data2      line\n");
 	IWL_ERR(priv, "%-28s (#%02d) %010u 0x%08X 0x%08X %u\n",
@@ -1654,12 +1672,14 @@
 		ptr += sizeof(u32);
 		if (mode == 0) {
 			/* data, ev */
+			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
 			IWL_ERR(priv, "EVT_LOG:0x%08x:%04u\n", time, ev);
 		} else {
 			data = iwl_read_targ_mem(priv, ptr);
 			ptr += sizeof(u32);
 			IWL_ERR(priv, "EVT_LOGT:%010u:0x%08x:%04u\n",
 					time, data, ev);
+			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
 		}
 	}
 }
@@ -1758,6 +1778,10 @@
 	priv->active_rate = priv->rates_mask;
 	priv->active_rate_basic = priv->rates_mask & IWL_BASIC_RATES_MASK;
 
+	/* Configure Tx antenna selection based on H/W config */
+	if (priv->cfg->ops->hcmd->set_tx_ant)
+		priv->cfg->ops->hcmd->set_tx_ant(priv, priv->cfg->valid_tx_ant);
+
 	if (iwl_is_associated(priv)) {
 		struct iwl_rxon_cmd *active_rxon =
 				(struct iwl_rxon_cmd *)&priv->active_rxon;
@@ -1785,7 +1809,7 @@
 	/* At this point, the NIC is initialized and operational */
 	iwl_rf_kill_ct_config(priv);
 
-	iwl_leds_register(priv);
+	iwl_leds_init(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
@@ -1823,8 +1847,6 @@
 	if (!exit_pending)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
-	iwl_leds_unregister(priv);
-
 	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
@@ -1885,11 +1907,9 @@
 
 	udelay(5);
 
-	/* FIXME: apm_ops.suspend(priv) */
-	if (exit_pending)
-		priv->cfg->ops->lib->apm_ops.stop(priv);
-	else
-		priv->cfg->ops->lib->apm_ops.reset(priv);
+	/* Stop the device, and put it in low power state */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
 
@@ -2276,6 +2296,69 @@
 
 #define UCODE_READY_TIMEOUT	(4 * HZ)
 
+/*
+ * Not a mac80211 entry point function, but it fits in with all the
+ * other mac80211 functions grouped here.
+ */
+static int iwl_setup_mac(struct iwl_priv *priv)
+{
+	int ret;
+	struct ieee80211_hw *hw = priv->hw;
+	hw->rate_control_algorithm = "iwl-agn-rs";
+
+	/* Tell mac80211 our characteristics */
+	hw->flags = IEEE80211_HW_SIGNAL_DBM |
+		    IEEE80211_HW_NOISE_DBM |
+		    IEEE80211_HW_AMPDU_AGGREGATION |
+		    IEEE80211_HW_SPECTRUM_MGMT;
+
+	if (!priv->cfg->broken_powersave)
+		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
+			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
+
+	hw->sta_data_size = sizeof(struct iwl_station_priv);
+	hw->wiphy->interface_modes =
+		BIT(NL80211_IFTYPE_STATION) |
+		BIT(NL80211_IFTYPE_ADHOC);
+
+	hw->wiphy->custom_regulatory = true;
+
+	/* Firmware does not support this */
+	hw->wiphy->disable_beacon_hints = true;
+
+	/*
+	 * For now, disable PS by default because it affects
+	 * RX performance significantly.
+	 */
+	hw->wiphy->ps_default = false;
+
+	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+	/* we create the 802.11 header and a zero-length SSID element */
+	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
+
+	/* Default value; 4 EDCA QOS priorities */
+	hw->queues = 4;
+
+	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
+
+	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+			&priv->bands[IEEE80211_BAND_2GHZ];
+	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
+		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+			&priv->bands[IEEE80211_BAND_5GHZ];
+
+	ret = ieee80211_register_hw(priv->hw);
+	if (ret) {
+		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
+		return ret;
+	}
+	priv->mac80211_registered = 1;
+
+	return 0;
+}
+
+
 static int iwl_mac_start(struct ieee80211_hw *hw)
 {
 	struct iwl_priv *priv = hw->priv;
@@ -2323,6 +2406,8 @@
 		}
 	}
 
+	iwl_led_start(priv);
+
 out:
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
@@ -2794,6 +2879,40 @@
 
 static DEVICE_ATTR(statistics, S_IRUGO, show_statistics, NULL);
 
+static ssize_t show_rts_ht_protection(struct device *d,
+			     struct device_attribute *attr, char *buf)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+
+	return sprintf(buf, "%s\n",
+		priv->cfg->use_rts_for_ht ? "RTS/CTS" : "CTS-to-self");
+}
+
+static ssize_t store_rts_ht_protection(struct device *d,
+			      struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct iwl_priv *priv = dev_get_drvdata(d);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		IWL_INFO(priv, "Input is not in decimal form.\n");
+	else {
+		if (!iwl_is_associated(priv))
+			priv->cfg->use_rts_for_ht = val ? true : false;
+		else
+			IWL_ERR(priv, "Sta associated with AP - "
+				"Change protection mechanism is not allowed\n");
+		ret = count;
+	}
+	return ret;
+}
+
+static DEVICE_ATTR(rts_ht_protection, S_IWUSR | S_IRUGO,
+			show_rts_ht_protection, store_rts_ht_protection);
+
 
 /*****************************************************************************
  *
@@ -2850,6 +2969,7 @@
 	&dev_attr_statistics.attr,
 	&dev_attr_temperature.attr,
 	&dev_attr_tx_power.attr,
+	&dev_attr_rts_ht_protection.attr,
 #ifdef CONFIG_IWLWIFI_DEBUG
 	&dev_attr_debug_level.attr,
 #endif
@@ -3136,6 +3256,15 @@
 		iwl_down(priv);
 	}
 
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with iwl_down(), but there are paths to
+	 * run iwl_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running iwl_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	iwl_tt_exit(priv);
 
 	/* make sure we flush any pending irq or
@@ -3215,20 +3344,51 @@
 /* 5150 Wifi/WiMax */
 	{IWL_PCI_DEVICE(0x423C, PCI_ANY_ID, iwl5150_agn_cfg)},
 	{IWL_PCI_DEVICE(0x423D, PCI_ANY_ID, iwl5150_agn_cfg)},
-/* 6000/6050 Series */
-	{IWL_PCI_DEVICE(0x008D, PCI_ANY_ID, iwl6000h_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x008E, PCI_ANY_ID, iwl6000h_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000i_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000i_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x0087, PCI_ANY_ID, iwl6050_2agn_cfg)},
-	{IWL_PCI_DEVICE(0x0088, PCI_ANY_ID, iwl6050_3agn_cfg)},
-	{IWL_PCI_DEVICE(0x0089, PCI_ANY_ID, iwl6050_2agn_cfg)},
+
+/* 6x00 Series */
+	{IWL_PCI_DEVICE(0x008D, 0x1301, iwl6000h_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x008D, 0x1321, iwl6000h_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x008D, 0x1326, iwl6000h_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x008D, 0x1306, iwl6000h_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x008D, 0x1307, iwl6000h_2bg_cfg)},
+	{IWL_PCI_DEVICE(0x008E, 0x1311, iwl6000h_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x008E, 0x1316, iwl6000h_2abg_cfg)},
+
+	{IWL_PCI_DEVICE(0x422B, 0x1101, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422B, 0x1121, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1301, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1306, iwl6000i_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1307, iwl6000i_2bg_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1321, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x422C, 0x1326, iwl6000i_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x4238, 0x1111, iwl6000_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, 0x1311, iwl6000i_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x4239, 0x1316, iwl6000i_2abg_cfg)},
+
+/* 6x50 WiFi/WiMax Series */
+	{IWL_PCI_DEVICE(0x0086, 0x1101, iwl6050_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x0086, 0x1121, iwl6050_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1301, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1306, iwl6050_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1321, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0087, 0x1326, iwl6050_2abg_cfg)},
+	{IWL_PCI_DEVICE(0x0088, 0x1111, iwl6050_3agn_cfg)},
+	{IWL_PCI_DEVICE(0x0089, 0x1311, iwl6050_2agn_cfg)},
+	{IWL_PCI_DEVICE(0x0089, 0x1316, iwl6050_2abg_cfg)},
+
 /* 1000 Series WiFi */
-	{IWL_PCI_DEVICE(0x0083, PCI_ANY_ID, iwl1000_bgn_cfg)},
-	{IWL_PCI_DEVICE(0x0084, PCI_ANY_ID, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1205, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1305, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1225, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1325, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1215, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1315, iwl1000_bgn_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1206, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1306, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1226, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0083, 0x1326, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1216, iwl1000_bg_cfg)},
+	{IWL_PCI_DEVICE(0x0084, 0x1316, iwl1000_bg_cfg)},
 #endif /* CONFIG_IWL5000 */
 
 	{0}
@@ -3283,9 +3443,9 @@
 module_init(iwl_init);
 
 #ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug50, iwl_debug_level, uint, 0444);
+module_param_named(debug50, iwl_debug_level, uint, S_IRUGO);
 MODULE_PARM_DESC(debug50, "50XX debug output mask (deprecated)");
-module_param_named(debug, iwl_debug_level, uint, 0644);
+module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
 #endif
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-calib.c b/drivers/net/wireless/iwlwifi/iwl-calib.c
index c4b565a..1f801eb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-calib.c
@@ -447,11 +447,11 @@
 				cpu_to_le16((u16)data->nrg_th_ofdm);
 
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_INDEX] =
-				cpu_to_le16(190);
+				cpu_to_le16(data->barker_corr_th_min);
 	cmd.table[HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX] =
-				cpu_to_le16(390);
+				cpu_to_le16(data->barker_corr_th_min_mrc);
 	cmd.table[HD_OFDM_ENERGY_TH_IN_INDEX] =
-				cpu_to_le16(62);
+				cpu_to_le16(data->nrg_th_cca);
 
 	IWL_DEBUG_CALIB(priv, "ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
 			data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
@@ -516,7 +516,7 @@
 	for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
 		data->nrg_silence_rssi[i] = 0;
 
-	data->auto_corr_ofdm = 90;
+	data->auto_corr_ofdm =  ranges->auto_corr_min_ofdm;
 	data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
 	data->auto_corr_ofdm_x1  = ranges->auto_corr_min_ofdm_x1;
 	data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
@@ -524,6 +524,9 @@
 	data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
 	data->nrg_th_cck = ranges->nrg_th_cck;
 	data->nrg_th_ofdm = ranges->nrg_th_ofdm;
+	data->barker_corr_th_min = ranges->barker_corr_th_min;
+	data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
+	data->nrg_th_cca = ranges->nrg_th_cca;
 
 	data->last_bad_plcp_cnt_ofdm = 0;
 	data->last_fa_cnt_ofdm = 0;
@@ -643,6 +646,15 @@
 }
 EXPORT_SYMBOL(iwl_sensitivity_calibration);
 
+static inline u8 find_first_chain(u8 mask)
+{
+	if (mask & ANT_A)
+		return CHAIN_A;
+	if (mask & ANT_B)
+		return CHAIN_B;
+	return CHAIN_C;
+}
+
 /*
  * Accumulate 20 beacons of signal and noise statistics for each of
  *   3 receivers/antennas/rx-chains, then figure out:
@@ -675,14 +687,17 @@
 	u8 num_tx_chains;
 	unsigned long flags;
 	struct statistics_rx_non_phy *rx_info = &(stat_resp->rx.general);
+	u8 first_chain;
 
 	if (priv->disable_chain_noise_cal)
 		return;
 
 	data = &(priv->chain_noise_data);
 
-	/* Accumulate just the first 20 beacons after the first association,
-	 *   then we're done forever. */
+	/*
+	 * Accumulate just the first "chain_noise_num_beacons" after
+	 * the first association, then we're done forever.
+	 */
 	if (data->state != IWL_CHAIN_NOISE_ACCUMULATE) {
 		if (data->state == IWL_CHAIN_NOISE_ALIVE)
 			IWL_DEBUG_CALIB(priv, "Wait for noise calib reset\n");
@@ -710,7 +725,10 @@
 		return;
 	}
 
-	/* Accumulate beacon statistics values across 20 beacons */
+	/*
+	 *  Accumulate beacon statistics values across
+	 * "chain_noise_num_beacons"
+	 */
 	chain_noise_a = le32_to_cpu(rx_info->beacon_silence_rssi_a) &
 				IN_BAND_FILTER;
 	chain_noise_b = le32_to_cpu(rx_info->beacon_silence_rssi_b) &
@@ -741,16 +759,19 @@
 	IWL_DEBUG_CALIB(priv, "chain_noise: a %d b %d c %d\n",
 			chain_noise_a, chain_noise_b, chain_noise_c);
 
-	/* If this is the 20th beacon, determine:
+	/* If this is the "chain_noise_num_beacons", determine:
 	 * 1)  Disconnected antennas (using signal strengths)
 	 * 2)  Differential gain (using silence noise) to balance receivers */
-	if (data->beacon_count != CAL_NUM_OF_BEACONS)
+	if (data->beacon_count != priv->cfg->chain_noise_num_beacons)
 		return;
 
 	/* Analyze signal for disconnected antenna */
-	average_sig[0] = (data->chain_signal_a) / CAL_NUM_OF_BEACONS;
-	average_sig[1] = (data->chain_signal_b) / CAL_NUM_OF_BEACONS;
-	average_sig[2] = (data->chain_signal_c) / CAL_NUM_OF_BEACONS;
+	average_sig[0] =
+		(data->chain_signal_a) / priv->cfg->chain_noise_num_beacons;
+	average_sig[1] =
+		(data->chain_signal_b) / priv->cfg->chain_noise_num_beacons;
+	average_sig[2] =
+		(data->chain_signal_c) / priv->cfg->chain_noise_num_beacons;
 
 	if (average_sig[0] >= average_sig[1]) {
 		max_average_sig = average_sig[0];
@@ -803,13 +824,17 @@
 			/* there is a Tx antenna connected */
 			break;
 		if (num_tx_chains == priv->hw_params.tx_chains_num &&
-		data->disconn_array[i]) {
-			/* This is the last TX antenna and is also
-			 * disconnected connect it anyway */
-			data->disconn_array[i] = 0;
-			active_chains |= ant_msk;
-			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - "
-				"declare %d as connected\n", i);
+		    data->disconn_array[i]) {
+			/*
+			 * If all chains are disconnected
+			 * connect the first valid tx chain
+			 */
+			first_chain =
+				find_first_chain(priv->cfg->valid_tx_ant);
+			data->disconn_array[first_chain] = 0;
+			active_chains |= BIT(first_chain);
+			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected W/A - declare %d as connected\n",
+					first_chain);
 			break;
 		}
 	}
@@ -820,9 +845,12 @@
 			active_chains);
 
 	/* Analyze noise for rx balance */
-	average_noise[0] = ((data->chain_noise_a)/CAL_NUM_OF_BEACONS);
-	average_noise[1] = ((data->chain_noise_b)/CAL_NUM_OF_BEACONS);
-	average_noise[2] = ((data->chain_noise_c)/CAL_NUM_OF_BEACONS);
+	average_noise[0] =
+		((data->chain_noise_a) / priv->cfg->chain_noise_num_beacons);
+	average_noise[1] =
+		((data->chain_noise_b) / priv->cfg->chain_noise_num_beacons);
+	average_noise[2] =
+		((data->chain_noise_c) / priv->cfg->chain_noise_num_beacons);
 
 	for (i = 0; i < NUM_RX_CHAINS; i++) {
 		if (!(data->disconn_array[i]) &&
@@ -843,7 +871,8 @@
 
 	if (priv->cfg->ops->utils->gain_computation)
 		priv->cfg->ops->utils->gain_computation(priv, average_noise,
-			min_average_noise_antenna_i, min_average_noise);
+				min_average_noise_antenna_i, min_average_noise,
+				find_first_chain(priv->cfg->valid_rx_ant));
 
 	/* Some power changes may have been made during the calibration.
 	 * Update and commit the RXON
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 4afaf77..954bad6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -109,11 +109,12 @@
 	REPLY_TX_LINK_QUALITY_CMD = 0x4e, /* 4965 only */
 
 	/* WiMAX coexistence */
-	COEX_PRIORITY_TABLE_CMD = 0x5a,	/*5000 only */
+	COEX_PRIORITY_TABLE_CMD = 0x5a,	/* for 5000 series and up */
 	COEX_MEDIUM_NOTIFICATION = 0x5b,
 	COEX_EVENT_CMD = 0x5c,
 
 	/* Calibration */
+	TEMPERATURE_NOTIFICATION = 0x62,
 	CALIBRATION_CFG_CMD = 0x65,
 	CALIBRATION_RES_NOTIFICATION = 0x66,
 	CALIBRATION_COMPLETE_NOTIFICATION = 0x67,
@@ -148,7 +149,7 @@
 	QUIET_NOTIFICATION = 0x96,		/* not used */
 	REPLY_TX_PWR_TABLE_CMD = 0x97,
 	REPLY_TX_POWER_DBM_CMD_V1 = 0x98,	/* old version of API */
-	TX_ANT_CONFIGURATION_CMD = 0x98,	/* not used */
+	TX_ANT_CONFIGURATION_CMD = 0x98,
 	MEASURE_ABORT_NOTIFICATION = 0x99,	/* not used */
 
 	/* Bluetooth device coexistence config command */
@@ -353,6 +354,9 @@
 #define POWER_TABLE_NUM_HT_OFDM_ENTRIES		32
 #define POWER_TABLE_CCK_ENTRY			32
 
+#define IWL_PWR_NUM_HT_OFDM_ENTRIES		24
+#define IWL_PWR_CCK_ENTRIES			2
+
 /**
  * union iwl4965_tx_power_dual_stream
  *
@@ -411,6 +415,16 @@
 	u8 reserved;
 } __attribute__ ((packed));
 
+/**
+ * Command TX_ANT_CONFIGURATION_CMD = 0x98
+ * This command is used to configure valid Tx antenna.
+ * By default uCode concludes the valid antenna according to the radio flavor.
+ * This command enables the driver to override/modify this conclusion.
+ */
+struct iwl_tx_ant_config_cmd {
+	__le32 valid;
+} __attribute__ ((packed));
+
 /******************************************************************************
  * (0a)
  * Alive and Error Commands & Responses:
@@ -793,7 +807,7 @@
 	struct iwl3945_power_per_rate power[IWL_MAX_RATES];
 } __attribute__ ((packed));
 
-struct iwl_channel_switch_cmd {
+struct iwl4965_channel_switch_cmd {
 	u8 band;
 	u8 expect_beacon;
 	__le16 channel;
@@ -803,6 +817,48 @@
 	struct iwl4965_tx_power_db tx_power;
 } __attribute__ ((packed));
 
+/**
+ * struct iwl5000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl5000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[2][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
+/**
+ * struct iwl6000_channel_switch_cmd
+ * @band: 0- 5.2GHz, 1- 2.4GHz
+ * @expect_beacon: 0- resume transmits after channel switch
+ *		   1- wait for beacon to resume transmits
+ * @channel: new channel number
+ * @rxon_flags: Rx on flags
+ * @rxon_filter_flags: filtering parameters
+ * @switch_time: switch time in extended beacon format
+ * @reserved: reserved bytes
+ */
+struct iwl6000_channel_switch_cmd {
+	u8 band;
+	u8 expect_beacon;
+	__le16 channel;
+	__le32 rxon_flags;
+	__le32 rxon_filter_flags;
+	__le32 switch_time;
+	__le32 reserved[3][IWL_PWR_NUM_HT_OFDM_ENTRIES + IWL_PWR_CCK_ENTRIES];
+} __attribute__ ((packed));
+
 /*
  * CHANNEL_SWITCH_NOTIFICATION = 0x73 (notification only, not a command)
  */
@@ -2162,6 +2218,19 @@
 	__le32 reserved2;
 } __attribute__ ((packed));
 
+#define BT_COEX_DISABLE (0x0)
+#define BT_COEX_MODE_2W (0x1)
+#define BT_COEX_MODE_3W (0x2)
+#define BT_COEX_MODE_4W (0x3)
+
+#define BT_LEAD_TIME_MIN (0x0)
+#define BT_LEAD_TIME_DEF (0x1E)
+#define BT_LEAD_TIME_MAX (0xFF)
+
+#define BT_MAX_KILL_MIN (0x1)
+#define BT_MAX_KILL_DEF (0x5)
+#define BT_MAX_KILL_MAX (0xFF)
+
 /*
  * REPLY_BT_CONFIG = 0x9b (command, has simple generic response)
  *
@@ -3237,12 +3306,6 @@
  *   Lower values mean higher energy; this means making sure that the value
  *   in HD_MIN_ENERGY_CCK_DET_INDEX is at or *above* "Max cck energy".
  *
- * Driver should set the following entries to fixed values:
- *
- *   HD_MIN_ENERGY_OFDM_DET_INDEX               100
- *   HD_BARKER_CORR_TH_ADD_MIN_INDEX            190
- *   HD_BARKER_CORR_TH_ADD_MIN_MRC_INDEX        390
- *   HD_OFDM_ENERGY_TH_IN_INDEX                  62
  */
 
 /*
@@ -3495,6 +3558,16 @@
  *****************************************************************************/
 
 struct iwl_rx_packet {
+	/*
+	 * The first 4 bytes of the RX frame header contain both the RX frame
+	 * size and some flags.
+	 * Bit fields:
+	 * 31:    flag flush RB request
+	 * 30:    flag ignore TC (terminal counter) request
+	 * 29:    flag fast IRQ request
+	 * 28-14: Reserved
+	 * 13-00: RX frame size
+	 */
 	__le32 len_n_flags;
 	struct iwl_cmd_header hdr;
 	union {
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index 484d5c1..d2b56ba 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -604,11 +604,27 @@
 }
 EXPORT_SYMBOL(iwlcore_free_geos);
 
+/*
+ *  iwlcore_rts_tx_cmd_flag: Set rts/cts. 3945 and 4965 only share this
+ *  function.
+ */
+void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+				__le32 *tx_flags)
+{
+	if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_RTS_CTS) {
+		*tx_flags |= TX_CMD_FLG_RTS_MSK;
+		*tx_flags &= ~TX_CMD_FLG_CTS_MSK;
+	} else if (info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
+		*tx_flags &= ~TX_CMD_FLG_RTS_MSK;
+		*tx_flags |= TX_CMD_FLG_CTS_MSK;
+	}
+}
+EXPORT_SYMBOL(iwlcore_rts_tx_cmd_flag);
+
 static bool is_single_rx_stream(struct iwl_priv *priv)
 {
 	return !priv->current_ht_config.is_ht ||
-	       ((priv->current_ht_config.mcs.rx_mask[1] == 0) &&
-		(priv->current_ht_config.mcs.rx_mask[2] == 0));
+	       priv->current_ht_config.single_chain_sufficient;
 }
 
 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
@@ -634,10 +650,9 @@
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf)
 {
-	struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 
-	if ((!iwl_ht_conf->is_ht) ||
-	    (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ))
+	if (!ht_conf->is_ht || !ht_conf->is_40mhz)
 		return 0;
 
 	/* We do not check for IEEE80211_HT_CAP_SUP_WIDTH_20_40
@@ -653,7 +668,7 @@
 #endif
 	return iwl_is_channel_extension(priv, priv->band,
 			le16_to_cpu(priv->staging_rxon.channel),
-			iwl_ht_conf->extension_chan_offset);
+			ht_conf->extension_chan_offset);
 }
 EXPORT_SYMBOL(iwl_is_ht40_tx_allowed);
 
@@ -877,11 +892,11 @@
 }
 EXPORT_SYMBOL(iwl_rate_get_lowest_plcp);
 
-void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf)
 {
 	struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 
-	if (!ht_info->is_ht) {
+	if (!ht_conf->is_ht) {
 		rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MSK |
 			RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK |
 			RXON_FLG_HT40_PROT_MSK |
@@ -892,7 +907,7 @@
 	/* FIXME: if the definition of ht_protection changed, the "translation"
 	 * will be needed for rxon->flags
 	 */
-	rxon->flags |= cpu_to_le32(ht_info->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
+	rxon->flags |= cpu_to_le32(ht_conf->ht_protection << RXON_FLG_HT_OPERATING_MODE_POS);
 
 	/* Set up channel bandwidth:
 	 * 20 MHz only, 20/40 mixed or pure 40 if ht40 ok */
@@ -901,10 +916,10 @@
 			 RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 	if (iwl_is_ht40_tx_allowed(priv, NULL)) {
 		/* pure ht40 */
-		if (ht_info->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
+		if (ht_conf->ht_protection == IEEE80211_HT_OP_MODE_PROTECTION_20MHZ) {
 			rxon->flags |= RXON_FLG_CHANNEL_MODE_PURE_40;
 			/* Note: control channel is opposite of extension channel */
-			switch (ht_info->extension_chan_offset) {
+			switch (ht_conf->extension_chan_offset) {
 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 				rxon->flags &= ~RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
 				break;
@@ -914,7 +929,7 @@
 			}
 		} else {
 			/* Note: control channel is opposite of extension channel */
-			switch (ht_info->extension_chan_offset) {
+			switch (ht_conf->extension_chan_offset) {
 			case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
 				rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 				rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED;
@@ -937,14 +952,10 @@
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
 		priv->cfg->ops->hcmd->set_rxon_chain(priv);
 
-	IWL_DEBUG_ASSOC(priv, "supported HT rate 0x%X 0x%X 0x%X "
-			"rxon flags 0x%X operation mode :0x%X "
+	IWL_DEBUG_ASSOC(priv, "rxon flags 0x%X operation mode :0x%X "
 			"extension channel offset 0x%x\n",
-			ht_info->mcs.rx_mask[0],
-			ht_info->mcs.rx_mask[1],
-			ht_info->mcs.rx_mask[2],
-			le32_to_cpu(rxon->flags), ht_info->ht_protection,
-			ht_info->extension_chan_offset);
+			le32_to_cpu(rxon->flags), ht_conf->ht_protection,
+			ht_conf->extension_chan_offset);
 	return;
 }
 EXPORT_SYMBOL(iwl_set_rxon_ht);
@@ -954,47 +965,37 @@
 #define IWL_NUM_IDLE_CHAINS_DUAL	2
 #define IWL_NUM_IDLE_CHAINS_SINGLE	1
 
-/* Determine how many receiver/antenna chains to use.
- * More provides better reception via diversity.  Fewer saves power.
+/*
+ * Determine how many receiver/antenna chains to use.
+ *
+ * More provides better reception via diversity.  Fewer saves power
+ * at the expense of throughput, but only when not in powersave to
+ * start with.
+ *
  * MIMO (dual stream) requires at least 2, but works better with 3.
  * This does not determine *which* chains to use, just how many.
  */
 static int iwl_get_active_rx_chain_count(struct iwl_priv *priv)
 {
-	bool is_single = is_single_rx_stream(priv);
-	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
-
 	/* # of Rx chains to use when expecting MIMO. */
-	if (is_single || (!is_cam && (priv->current_ht_config.sm_ps ==
-						 WLAN_HT_CAP_SM_PS_STATIC)))
+	if (is_single_rx_stream(priv))
 		return IWL_NUM_RX_CHAINS_SINGLE;
 	else
 		return IWL_NUM_RX_CHAINS_MULTIPLE;
 }
 
+/*
+ * When we are in power saving, there's no difference between
+ * using multiple chains or just a single chain, but due to the
+ * lack of SM PS we lose a lot of throughput if we use just a
+ * single chain.
+ *
+ * Therefore, use the active count here (which will use multiple
+ * chains unless connected to a legacy AP).
+ */
 static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt)
 {
-	int idle_cnt;
-	bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status);
-	/* # Rx chains when idling and maybe trying to save power */
-	switch (priv->current_ht_config.sm_ps) {
-	case WLAN_HT_CAP_SM_PS_STATIC:
-	case WLAN_HT_CAP_SM_PS_DYNAMIC:
-		idle_cnt = (is_cam) ? IWL_NUM_IDLE_CHAINS_DUAL :
-					IWL_NUM_IDLE_CHAINS_SINGLE;
-		break;
-	case WLAN_HT_CAP_SM_PS_DISABLED:
-		idle_cnt = (is_cam) ? active_cnt : IWL_NUM_IDLE_CHAINS_SINGLE;
-		break;
-	case WLAN_HT_CAP_SM_PS_INVALID:
-	default:
-		IWL_ERR(priv, "invalid mimo ps mode %d\n",
-			   priv->current_ht_config.sm_ps);
-		WARN_ON(1);
-		idle_cnt = -1;
-		break;
-	}
-	return idle_cnt;
+	return active_cnt;
 }
 
 /* up to 4 chains */
@@ -1004,7 +1005,7 @@
 	res = (chain_bitmap & BIT(0)) >> 0;
 	res += (chain_bitmap & BIT(1)) >> 1;
 	res += (chain_bitmap & BIT(2)) >> 2;
-	res += (chain_bitmap & BIT(4)) >> 4;
+	res += (chain_bitmap & BIT(3)) >> 3;
 	return res;
 }
 
@@ -1280,13 +1281,18 @@
 
 void iwl_rx_csa(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_rxon_cmd *rxon = (void *)&priv->active_rxon;
 	struct iwl_csa_notification *csa = &(pkt->u.csa_notif);
-	IWL_DEBUG_11H(priv, "CSA notif: channel %d, status %d\n",
-		      le16_to_cpu(csa->channel), le32_to_cpu(csa->status));
-	rxon->channel = csa->channel;
-	priv->staging_rxon.channel = csa->channel;
+
+	if (!le32_to_cpu(csa->status)) {
+		rxon->channel = csa->channel;
+		priv->staging_rxon.channel = csa->channel;
+		IWL_DEBUG_11H(priv, "CSA notif: channel %d\n",
+		      le16_to_cpu(csa->channel));
+	} else
+		IWL_ERR(priv, "CSA notif (fail) : channel %d\n",
+		      le16_to_cpu(csa->channel));
 }
 EXPORT_SYMBOL(iwl_rx_csa);
 
@@ -1345,6 +1351,156 @@
 }
 EXPORT_SYMBOL(iwl_irq_handle_error);
 
+int iwl_apm_stop_master(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	/* set stop master bit */
+	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER);
+
+	iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED,
+			CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
+
+	spin_unlock_irqrestore(&priv->lock, flags);
+	IWL_DEBUG_INFO(priv, "stop master\n");
+
+	return 0;
+}
+EXPORT_SYMBOL(iwl_apm_stop_master);
+
+void iwl_apm_stop(struct iwl_priv *priv)
+{
+	unsigned long flags;
+
+	IWL_DEBUG_INFO(priv, "Stop card, put in low power state\n");
+
+	iwl_apm_stop_master(priv);
+
+	spin_lock_irqsave(&priv->lock, flags);
+
+	iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET);
+
+	udelay(10);
+	/* clear "init complete"  move adapter D0A* --> D0U state */
+	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+EXPORT_SYMBOL(iwl_apm_stop);
+
+
+/*
+ * Start up NIC's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via iwl_apm_stop())
+ * NOTE:  This does not load uCode nor start the embedded processor
+ */
+int iwl_apm_init(struct iwl_priv *priv)
+{
+	int ret = 0;
+	u16 lctl;
+
+	IWL_DEBUG_INFO(priv, "Init card's basic functions\n");
+
+	/*
+	 * Use "set_bit" below rather than "write", to preserve any hardware
+	 * bits already set by default after reset.
+	 */
+
+	/* Disable L0S exit timer (platform NMI Work/Around) */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+			  CSR_GIO_CHICKEN_BITS_REG_BIT_DIS_L0S_EXIT_TIMER);
+
+	/*
+	 * Disable L0s without affecting L1;
+	 *  don't wait for ICH L0s (ICH bug W/A)
+	 */
+	iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS,
+			  CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX);
+
+	/* Set FH wait threshold to maximum (HW error during stress W/A) */
+	iwl_set_bit(priv, CSR_DBG_HPET_MEM_REG, CSR_DBG_HPET_MEM_REG_VAL);
+
+	/*
+	 * Enable HAP INTA (interrupt from management bus) to
+	 * wake device's PCI Express link L1a -> L0s
+	 * NOTE:  This is no-op for 3945 (non-existant bit)
+	 */
+	iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
+				    CSR_HW_IF_CONFIG_REG_BIT_HAP_WAKE_L1A);
+
+	/*
+	 * HW bug W/A - costs negligible power consumption ...
+	 * Check if BIOS (or OS) enabled L1-ASPM on this device
+	 */
+	if (priv->cfg->set_l0s) {
+		lctl = iwl_pcie_link_ctl(priv);
+		if ((lctl & PCI_CFG_LINK_CTRL_VAL_L1_EN) ==
+					PCI_CFG_LINK_CTRL_VAL_L1_EN) {
+			/* L1-ASPM enabled; disable(!) L0S  */
+			iwl_set_bit(priv, CSR_GIO_REG,
+					CSR_GIO_REG_VAL_L0S_ENABLED);
+			IWL_DEBUG_POWER(priv, "L1 Enabled; Disabling L0S\n");
+		} else {
+			/* L1-ASPM disabled; enable(!) L0S */
+			iwl_clear_bit(priv, CSR_GIO_REG,
+					CSR_GIO_REG_VAL_L0S_ENABLED);
+			IWL_DEBUG_POWER(priv, "L1 Disabled; Enabling L0S\n");
+		}
+	}
+
+	/* Configure analog phase-lock-loop before activating to D0A */
+	if (priv->cfg->pll_cfg_val)
+		iwl_set_bit(priv, CSR_ANA_PLL_CFG, priv->cfg->pll_cfg_val);
+
+	/*
+	 * Set "initialization complete" bit to move adapter from
+	 * D0U* --> D0A* (powered-up active) state.
+	 */
+	iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
+
+	/*
+	 * Wait for clock stabilization; once stabilized, access to
+	 * device-internal resources is supported, e.g. iwl_write_prph()
+	 * and accesses to uCode SRAM.
+	 */
+	ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
+			CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
+	if (ret < 0) {
+		IWL_DEBUG_INFO(priv, "Failed to init the card\n");
+		goto out;
+	}
+
+	/*
+	 * Enable DMA and BSM (if used) clocks, wait for them to stabilize.
+	 * BSM (Boostrap State Machine) is only in 3945 and 4965;
+	 * later devices (i.e. 5000 and later) have non-volatile SRAM,
+	 * and don't need BSM to restore data after power-saving sleep.
+	 *
+	 * Write to "CLK_EN_REG"; "1" bits enable clocks, while "0" bits
+	 * do not disable clocks.  This preserves any hardware bits already
+	 * set by default in "CLK_CTRL_REG" after reset.
+	 */
+	if (priv->cfg->use_bsm)
+		iwl_write_prph(priv, APMG_CLK_EN_REG,
+			APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT);
+	else
+		iwl_write_prph(priv, APMG_CLK_EN_REG,
+			APMG_CLK_VAL_DMA_CLK_RQT);
+	udelay(20);
+
+	/* Disable L1-Active */
+	iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG,
+			  APMG_PCIDEV_STT_VAL_L1_ACT_DIS);
+
+out:
+	return ret;
+}
+EXPORT_SYMBOL(iwl_apm_init);
+
+
+
 void iwl_configure_filter(struct ieee80211_hw *hw,
 			  unsigned int changed_flags,
 			  unsigned int *total_flags,
@@ -1392,73 +1548,14 @@
 }
 EXPORT_SYMBOL(iwl_configure_filter);
 
-int iwl_setup_mac(struct iwl_priv *priv)
-{
-	int ret;
-	struct ieee80211_hw *hw = priv->hw;
-	hw->rate_control_algorithm = "iwl-agn-rs";
-
-	/* Tell mac80211 our characteristics */
-	hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		    IEEE80211_HW_NOISE_DBM |
-		    IEEE80211_HW_AMPDU_AGGREGATION |
-		    IEEE80211_HW_SPECTRUM_MGMT;
-
-	if (!priv->cfg->broken_powersave)
-		hw->flags |= IEEE80211_HW_SUPPORTS_PS |
-			     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
-
-	hw->wiphy->interface_modes =
-		BIT(NL80211_IFTYPE_STATION) |
-		BIT(NL80211_IFTYPE_ADHOC);
-
-	hw->wiphy->custom_regulatory = true;
-
-	/* Firmware does not support this */
-	hw->wiphy->disable_beacon_hints = true;
-
-	/*
-	 * For now, disable PS by default because it affects
-	 * RX performance significantly.
-	 */
-	hw->wiphy->ps_default = false;
-
-	hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
-	/* we create the 802.11 header and a zero-length SSID element */
-	hw->wiphy->max_scan_ie_len = IWL_MAX_PROBE_REQUEST - 24 - 2;
-
-	/* Default value; 4 EDCA QOS priorities */
-	hw->queues = 4;
-
-	hw->max_listen_interval = IWL_CONN_MAX_LISTEN_INTERVAL;
-
-	if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
-			&priv->bands[IEEE80211_BAND_2GHZ];
-	if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
-		priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
-			&priv->bands[IEEE80211_BAND_5GHZ];
-
-	ret = ieee80211_register_hw(priv->hw);
-	if (ret) {
-		IWL_ERR(priv, "Failed to register hw (error %d)\n", ret);
-		return ret;
-	}
-	priv->mac80211_registered = 1;
-
-	return 0;
-}
-EXPORT_SYMBOL(iwl_setup_mac);
-
 int iwl_set_hw_params(struct iwl_priv *priv)
 {
 	priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
 	priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
 	if (priv->cfg->mod_params->amsdu_size_8K)
-		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
+		priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_8K);
 	else
-		priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
-	priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
+		priv->hw_params.rx_page_order = get_order(IWL_RX_BUF_SIZE_4K);
 
 	priv->hw_params.max_beacon_itrvl = IWL_MAX_UCODE_BEACON_INTERVAL;
 
@@ -1487,15 +1584,12 @@
 	/* Clear the driver's (not device's) station table */
 	iwl_clear_stations_table(priv);
 
-	priv->data_retry_limit = -1;
 	priv->ieee_channels = NULL;
 	priv->ieee_rates = NULL;
 	priv->band = IEEE80211_BAND_2GHZ;
 
 	priv->iw_mode = NL80211_IFTYPE_STATION;
 
-	priv->current_ht_config.sm_ps = WLAN_HT_CAP_SM_PS_DISABLED;
-
 	/* Choose which receivers/antennas to use */
 	if (priv->cfg->ops->hcmd->set_rxon_chain)
 		priv->cfg->ops->hcmd->set_rxon_chain(priv);
@@ -1914,9 +2008,9 @@
 int iwl_send_bt_config(struct iwl_priv *priv)
 {
 	struct iwl_bt_cmd bt_cmd = {
-		.flags = 3,
-		.lead_time = 0xAA,
-		.max_kill = 1,
+		.flags = BT_COEX_MODE_4W,
+		.lead_time = BT_LEAD_TIME_DEF,
+		.max_kill = BT_MAX_KILL_DEF,
 		.kill_ack_mask = 0,
 		.kill_cts_mask = 0,
 	};
@@ -2076,10 +2170,7 @@
 	spin_unlock_irqrestore(&priv->lock, flags);
 	priv->thermal_throttle.ct_kill_toggle = false;
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_1000:
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
+	if (priv->cfg->support_ct_kill_exit) {
 		adv_cmd.critical_temperature_enter =
 			cpu_to_le32(priv->hw_params.ct_kill_threshold);
 		adv_cmd.critical_temperature_exit =
@@ -2096,8 +2187,7 @@
 					"exit is %d\n",
 				       priv->hw_params.ct_kill_threshold,
 				       priv->hw_params.ct_kill_exit_threshold);
-		break;
-	default:
+	} else {
 		cmd.critical_temperature_R =
 			cpu_to_le32(priv->hw_params.ct_kill_threshold);
 
@@ -2110,7 +2200,6 @@
 					"succeeded, "
 					"critical temperature is %d\n",
 					priv->hw_params.ct_kill_threshold);
-		break;
 	}
 }
 EXPORT_SYMBOL(iwl_rf_kill_ct_config);
@@ -2142,7 +2231,7 @@
 			   struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_sleep_notification *sleep = &(pkt->u.sleep_notif);
 	IWL_DEBUG_RX(priv, "sleep mode: %d, src: %d\n",
 		     sleep->pm_sleep_mode, sleep->pm_wakeup_src);
@@ -2153,7 +2242,7 @@
 void iwl_rx_pm_debug_statistics_notif(struct iwl_priv *priv,
 				      struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
 	IWL_DEBUG_RADIO(priv, "Dumping %d bytes of unhandled "
 			"notification for %s:\n", len,
@@ -2165,7 +2254,7 @@
 void iwl_rx_reply_error(struct iwl_priv *priv,
 			struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 
 	IWL_ERR(priv, "Error Reply type 0x%08X cmd %s (0x%02X) "
 		"seq 0x%04X ser 0x%08X\n",
@@ -2227,42 +2316,58 @@
 EXPORT_SYMBOL(iwl_mac_conf_tx);
 
 static void iwl_ht_conf(struct iwl_priv *priv,
-			    struct ieee80211_bss_conf *bss_conf)
+			struct ieee80211_bss_conf *bss_conf)
 {
-	struct ieee80211_sta_ht_cap *ht_conf;
-	struct iwl_ht_info *iwl_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	struct ieee80211_sta *sta;
 
 	IWL_DEBUG_MAC80211(priv, "enter: \n");
 
-	if (!iwl_conf->is_ht)
+	if (!ht_conf->is_ht)
 		return;
 
-
-	/*
-	 * It is totally wrong to base global information on something
-	 * that is valid only when associated, alas, this driver works
-	 * that way and I don't know how to fix it.
-	 */
-
-	rcu_read_lock();
-	sta = ieee80211_find_sta(priv->hw, priv->bssid);
-	if (!sta) {
-		rcu_read_unlock();
-		return;
-	}
-	ht_conf = &sta->ht_cap;
-
-	iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2);
-
-	memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16);
-
-	iwl_conf->ht_protection =
+	ht_conf->ht_protection =
 		bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_PROTECTION;
-	iwl_conf->non_GF_STA_present =
+	ht_conf->non_GF_STA_present =
 		!!(bss_conf->ht_operation_mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
 
-	rcu_read_unlock();
+	ht_conf->single_chain_sufficient = false;
+
+	switch (priv->iw_mode) {
+	case NL80211_IFTYPE_STATION:
+		rcu_read_lock();
+		sta = ieee80211_find_sta(priv->hw, priv->bssid);
+		if (sta) {
+			struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap;
+			int maxstreams;
+
+			maxstreams = (ht_cap->mcs.tx_params &
+				      IEEE80211_HT_MCS_TX_MAX_STREAMS_MASK)
+					>> IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;
+			maxstreams += 1;
+
+			if ((ht_cap->mcs.rx_mask[1] == 0) &&
+			    (ht_cap->mcs.rx_mask[2] == 0))
+				ht_conf->single_chain_sufficient = true;
+			if (maxstreams <= 1)
+				ht_conf->single_chain_sufficient = true;
+		} else {
+			/*
+			 * If at all, this can only happen through a race
+			 * when the AP disconnects us while we're still
+			 * setting up the connection, in that case mac80211
+			 * will soon tell us about that.
+			 */
+			ht_conf->single_chain_sufficient = true;
+		}
+		rcu_read_unlock();
+		break;
+	case NL80211_IFTYPE_ADHOC:
+		ht_conf->single_chain_sufficient = true;
+		break;
+	default:
+		break;
+	}
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
@@ -2386,6 +2491,8 @@
 			priv->timestamp = bss_conf->timestamp;
 			priv->assoc_capability = bss_conf->assoc_capability;
 
+			iwl_led_associate(priv);
+
 			/*
 			 * We have just associated, don't start scan too early
 			 * leave time for EAPOL exchange to complete.
@@ -2396,9 +2503,10 @@
 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
 			if (!iwl_is_rfkill(priv))
 				priv->cfg->ops->lib->post_associate(priv);
-		} else
+		} else {
 			priv->assoc_id = 0;
-
+			iwl_led_disassociate(priv);
+		}
 	}
 
 	if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2569,7 +2677,7 @@
 	struct iwl_priv *priv = hw->priv;
 	const struct iwl_channel_info *ch_info;
 	struct ieee80211_conf *conf = &hw->conf;
-	struct iwl_ht_info *ht_conf = &priv->current_ht_config;
+	struct iwl_ht_config *ht_conf = &priv->current_ht_config;
 	unsigned long flags = 0;
 	int ret = 0;
 	u16 ch;
@@ -2611,6 +2719,14 @@
 			goto set_ch_out;
 		}
 
+		if (iwl_is_associated(priv) &&
+		    (le16_to_cpu(priv->active_rxon.channel) != ch) &&
+		    priv->cfg->ops->lib->set_channel_switch) {
+			ret = priv->cfg->ops->lib->set_channel_switch(priv,
+				ch);
+			goto out;
+		}
+
 		spin_lock_irqsave(&priv->lock, flags);
 
 		/* Configure HT40 channels */
@@ -2619,21 +2735,18 @@
 			if (conf_is_ht40_minus(conf)) {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_BELOW;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_40MHZ;
+				ht_conf->is_40mhz = true;
 			} else if (conf_is_ht40_plus(conf)) {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_40MHZ;
+				ht_conf->is_40mhz = true;
 			} else {
 				ht_conf->extension_chan_offset =
 					IEEE80211_HT_PARAM_CHA_SEC_NONE;
-				ht_conf->supported_chan_width =
-					IWL_CHANNEL_WIDTH_20MHZ;
+				ht_conf->is_40mhz = false;
 			}
 		} else
-			ht_conf->supported_chan_width = IWL_CHANNEL_WIDTH_20MHZ;
+			ht_conf->is_40mhz = false;
 		/* Default to no protection. Protection mode will later be set
 		 * from BSS config in iwl_ht_conf */
 		ht_conf->ht_protection = IEEE80211_HT_OP_MODE_PROTECTION_NONE;
@@ -2655,7 +2768,8 @@
 		iwl_set_rate(priv);
 	}
 
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
+	if (changed & (IEEE80211_CONF_CHANGE_PS |
+			IEEE80211_CONF_CHANGE_IDLE)) {
 		ret = iwl_power_update_mode(priv, false);
 		if (ret)
 			IWL_DEBUG_MAC80211(priv, "Error setting sleep level\n");
@@ -2739,7 +2853,7 @@
 	IWL_DEBUG_MAC80211(priv, "enter\n");
 
 	spin_lock_irqsave(&priv->lock, flags);
-	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_info));
+	memset(&priv->current_ht_config, 0, sizeof(struct iwl_ht_config));
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 	iwl_reset_qos(priv);
@@ -2791,6 +2905,27 @@
 }
 EXPORT_SYMBOL(iwl_mac_reset_tsf);
 
+int iwl_alloc_txq_mem(struct iwl_priv *priv)
+{
+	if (!priv->txq)
+		priv->txq = kzalloc(
+			sizeof(struct iwl_tx_queue) * priv->cfg->num_of_queues,
+			GFP_KERNEL);
+	if (!priv->txq) {
+		IWL_ERR(priv, "Not enough memory for txq \n");
+		return -ENOMEM;
+	}
+	return 0;
+}
+EXPORT_SYMBOL(iwl_alloc_txq_mem);
+
+void iwl_free_txq_mem(struct iwl_priv *priv)
+{
+	kfree(priv->txq);
+	priv->txq = NULL;
+}
+EXPORT_SYMBOL(iwl_free_txq_mem);
+
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 
 #define IWL_TRAFFIC_DUMP_SIZE	(IWL_TRAFFIC_ENTRY_SIZE * IWL_TRAFFIC_ENTRIES)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index e50103a..b875dcf 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -89,6 +89,7 @@
 	int (*rxon_assoc)(struct iwl_priv *priv);
 	int (*commit_rxon)(struct iwl_priv *priv);
 	void (*set_rxon_chain)(struct iwl_priv *priv);
+	int (*set_tx_ant)(struct iwl_priv *priv, u8 valid_tx_ant);
 };
 
 struct iwl_hcmd_utils_ops {
@@ -97,7 +98,8 @@
 	void (*gain_computation)(struct iwl_priv *priv,
 			u32 *average_noise,
 			u16 min_average_noise_antennat_i,
-			u32 min_average_noise);
+			u32 min_average_noise,
+			u8 default_chain);
 	void (*chain_noise_reset)(struct iwl_priv *priv);
 	void (*rts_tx_cmd_flag)(struct ieee80211_tx_info *info,
 			__le32 *tx_flags);
@@ -107,7 +109,6 @@
 
 struct iwl_apm_ops {
 	int (*init)(struct iwl_priv *priv);
-	int (*reset)(struct iwl_priv *priv);
 	void (*stop)(struct iwl_priv *priv);
 	void (*config)(struct iwl_priv *priv);
 	int (*set_pwr_src)(struct iwl_priv *priv, enum iwl_pwr_src src);
@@ -168,6 +169,7 @@
 	int (*load_ucode)(struct iwl_priv *priv);
 	void (*dump_nic_event_log)(struct iwl_priv *priv);
 	void (*dump_nic_error_log)(struct iwl_priv *priv);
+	int (*set_channel_switch)(struct iwl_priv *priv, u16 channel);
 	/* power management */
 	struct iwl_apm_ops apm_ops;
 
@@ -185,18 +187,24 @@
 	struct iwl_temp_ops temp_ops;
 };
 
+struct iwl_led_ops {
+	int (*cmd)(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd);
+	int (*on)(struct iwl_priv *priv);
+	int (*off)(struct iwl_priv *priv);
+};
+
 struct iwl_ops {
 	const struct iwl_ucode_ops *ucode;
 	const struct iwl_lib_ops *lib;
 	const struct iwl_hcmd_ops *hcmd;
 	const struct iwl_hcmd_utils_ops *utils;
+	const struct iwl_led_ops *led;
 };
 
 struct iwl_mod_params {
 	int sw_crypto;		/* def: 0 = using hardware encryption */
 	int disable_hw_scan;	/* def: 0 = use h/w scan */
 	int num_of_queues;	/* def: HW dependent */
-	int num_of_ampdu_queues;/* def: HW dependent */
 	int disable_11n;	/* def: 0 = 11n capabilities enabled */
 	int amsdu_size_8K;	/* def: 1 = enable 8K amsdu size */
 	int antenna;  		/* def: 0 = both antennas (use diversity) */
@@ -213,6 +221,13 @@
  * @pa_type: used by 6000 series only to identify the type of Power Amplifier
  * @max_ll_items: max number of OTP blocks
  * @shadow_ram_support: shadow support for OTP memory
+ * @led_compensation: compensate on the led on/off time per HW according
+ *	to the deviation to achieve the desired led frequency.
+ *	The detail algorithm is described in iwl-led.c
+ * @use_rts_for_ht: use rts/cts protection for HT traffic
+ * @chain_noise_num_beacons: number of beacons used to compute chain noise
+ * @adv_thermal_throttle: support advance thermal throttle
+ * @support_ct_kill_exit: support ct kill exit condition
  *
  * We enable the driver to be backward compatible wrt API version. The
  * driver specifies which APIs it supports (with @ucode_api_max being the
@@ -244,17 +259,30 @@
 	int eeprom_size;
 	u16  eeprom_ver;
 	u16  eeprom_calib_ver;
+	int num_of_queues;	/* def: HW dependent */
+	int num_of_ampdu_queues;/* def: HW dependent */
 	const struct iwl_ops *ops;
 	const struct iwl_mod_params *mod_params;
 	u8   valid_tx_ant;
 	u8   valid_rx_ant;
-	bool need_pll_cfg;
+
+	/* for iwl_apm_init() */
+	u32 pll_cfg_val;
+	bool set_l0s;
+	bool use_bsm;
+
 	bool use_isr_legacy;
 	enum iwl_pa_type pa_type;
 	const u16 max_ll_items;
 	const bool shadow_ram_support;
 	const bool ht_greenfield_support;
+	u16 led_compensation;
 	const bool broken_powersave;
+	bool use_rts_for_ht;
+	int chain_noise_num_beacons;
+	const bool supports_idle;
+	bool adv_thermal_throttle;
+	bool support_ct_kill_exit;
 };
 
 /***************************
@@ -273,7 +301,7 @@
 int iwl_full_rxon_required(struct iwl_priv *priv);
 void iwl_set_rxon_chain(struct iwl_priv *priv);
 int iwl_set_rxon_channel(struct iwl_priv *priv, struct ieee80211_channel *ch);
-void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info);
+void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_config *ht_conf);
 u8 iwl_is_ht40_tx_allowed(struct iwl_priv *priv,
 			 struct ieee80211_sta_ht_cap *sta_ht_inf);
 void iwl_set_flags_for_band(struct iwl_priv *priv, enum ieee80211_band band);
@@ -287,7 +315,6 @@
 			  unsigned int changed_flags,
 			  unsigned int *total_flags, u64 multicast);
 int iwl_hw_nic_init(struct iwl_priv *priv);
-int iwl_setup_mac(struct iwl_priv *priv);
 int iwl_set_hw_params(struct iwl_priv *priv);
 int iwl_init_drv(struct iwl_priv *priv);
 void iwl_uninit_drv(struct iwl_priv *priv);
@@ -309,6 +336,10 @@
 int iwl_mac_get_tx_stats(struct ieee80211_hw *hw,
 			 struct ieee80211_tx_queue_stats *stats);
 void iwl_mac_reset_tsf(struct ieee80211_hw *hw);
+int iwl_alloc_txq_mem(struct iwl_priv *priv);
+void iwl_free_txq_mem(struct iwl_priv *priv);
+void iwlcore_rts_tx_cmd_flag(struct ieee80211_tx_info *info,
+				__le32 *tx_flags);
 #ifdef CONFIG_IWLWIFI_DEBUGFS
 int iwl_alloc_traffic_mem(struct iwl_priv *priv);
 void iwl_free_traffic_mem(struct iwl_priv *priv);
@@ -509,7 +540,7 @@
 			   const void *data,
 			   void (*callback)(struct iwl_priv *priv,
 					    struct iwl_device_cmd *cmd,
-					    struct sk_buff *skb));
+					    struct iwl_rx_packet *pkt));
 
 int iwl_enqueue_hcmd(struct iwl_priv *priv, struct iwl_host_cmd *cmd);
 
@@ -569,6 +600,7 @@
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
+#define STATUS_CT_KILL		4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7
@@ -613,6 +645,11 @@
 	return iwl_is_rfkill_hw(priv);
 }
 
+static inline int iwl_is_ctkill(struct iwl_priv *priv)
+{
+	return test_bit(STATUS_CT_KILL, &priv->status);
+}
+
 static inline int iwl_is_ready_rf(struct iwl_priv *priv)
 {
 
@@ -634,6 +671,9 @@
 				    struct iwl_rx_mem_buffer *rxb);
 void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 					   struct iwl_rx_mem_buffer *rxb);
+void iwl_apm_stop(struct iwl_priv *priv);
+int iwl_apm_stop_master(struct iwl_priv *priv);
+int iwl_apm_init(struct iwl_priv *priv);
 
 void iwl_setup_rxon_timing(struct iwl_priv *priv);
 static inline int iwl_send_rxon_assoc(struct iwl_priv *priv)
@@ -653,5 +693,4 @@
 {
 	return priv->hw->wiphy->bands[band];
 }
-
 #endif /* __iwl_core_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-csr.h b/drivers/net/wireless/iwlwifi/iwl-csr.h
index 06437d1..b6ed5a3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-csr.h
+++ b/drivers/net/wireless/iwlwifi/iwl-csr.h
@@ -109,8 +109,9 @@
  * Bit fields:
  *  3-2:  0 = A, 1 = B, 2 = C, 3 = D step
  */
-#define CSR_HW_REV_WA_REG	(CSR_BASE+0x22C)
-#define CSR_DBG_HPET_MEM_REG	(CSR_BASE+0x240)
+#define CSR_HW_REV_WA_REG		(CSR_BASE+0x22C)
+#define CSR_DBG_HPET_MEM_REG		(CSR_BASE+0x240)
+#define CSR_DBG_LINK_PWR_MGMT_REG	(CSR_BASE+0x250)
 
 /* Bits for CSR_HW_IF_CONFIG_REG */
 #define CSR49_HW_IF_CONFIG_REG_BIT_4965_R	(0x00000010)
@@ -195,6 +196,7 @@
 #define CSR_RESET_REG_FLAG_SW_RESET                  (0x00000080)
 #define CSR_RESET_REG_FLAG_MASTER_DISABLED           (0x00000100)
 #define CSR_RESET_REG_FLAG_STOP_MASTER               (0x00000200)
+#define CSR_RESET_LINK_PWR_MGMT_DISABLED             (0x80000000)
 
 /* GP (general purpose) CONTROL */
 #define CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY        (0x00000001)
@@ -230,12 +232,22 @@
 
 /* EEPROM GP */
 #define CSR_EEPROM_GP_VALID_MSK		(0x00000007)
-#define CSR_EEPROM_GP_BAD_SIGNATURE	(0x00000000)
 #define CSR_EEPROM_GP_IF_OWNER_MSK	(0x00000180)
 #define CSR_OTP_GP_REG_DEVICE_SELECT	(0x00010000) /* 0 - EEPROM, 1 - OTP */
 #define CSR_OTP_GP_REG_OTP_ACCESS_MODE	(0x00020000) /* 0 - absolute, 1 - relative */
 #define CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK          (0x00100000) /* bit 20 */
 #define CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK        (0x00200000) /* bit 21 */
+#define CSR_GP_REG_POWER_SAVE_STATUS_MSK            (0x03000000) /* bit 24/25 */
+#define CSR_GP_REG_NO_POWER_SAVE            (0x00000000)
+#define CSR_GP_REG_MAC_POWER_SAVE           (0x01000000)
+#define CSR_GP_REG_PHY_POWER_SAVE           (0x02000000)
+#define CSR_GP_REG_POWER_SAVE_ERROR         (0x03000000)
+
+/* EEPROM signature */
+#define CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP	(0x00000000)
+#define CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP		(0x00000001)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K		(0x00000002)
+#define CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K		(0x00000004)
 
 /* CSR GIO */
 #define CSR_GIO_REG_VAL_L0S_ENABLED	(0x00000002)
diff --git a/drivers/net/wireless/iwlwifi/iwl-debug.h b/drivers/net/wireless/iwlwifi/iwl-debug.h
index cbc6290..96c92ea 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debug.h
+++ b/drivers/net/wireless/iwlwifi/iwl-debug.h
@@ -84,9 +84,7 @@
 		struct dentry *file_interrupt;
 		struct dentry *file_qos;
 		struct dentry *file_thermal_throttling;
-#ifdef CONFIG_IWLWIFI_LEDS
 		struct dentry *file_led;
-#endif
 		struct dentry *file_disable_ht40;
 		struct dentry *file_sleep_level_override;
 		struct dentry *file_current_sleep_command;
@@ -108,6 +106,7 @@
 		struct dentry *file_sensitivity;
 		struct dentry *file_chain_noise;
 		struct dentry *file_tx_power;
+		struct dentry *file_power_save_status;
 	} dbgfs_debug_files;
 	u32 sram_offset;
 	u32 sram_len;
diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
index a198bcf..8784911 100644
--- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c
@@ -383,6 +383,7 @@
 	int pos = 0, ofs = 0, buf_size = 0;
 	const u8 *ptr;
 	char *buf;
+	u16 eeprom_ver;
 	size_t eeprom_len = priv->cfg->eeprom_size;
 	buf_size = 4 * eeprom_len + 256;
 
@@ -403,9 +404,11 @@
 		IWL_ERR(priv, "Can not allocate Buffer\n");
 		return -ENOMEM;
 	}
-	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s\n",
+	eeprom_ver = iwl_eeprom_query16(priv, EEPROM_VERSION);
+	pos += scnprintf(buf + pos, buf_size - pos, "NVM Type: %s, "
+			"version: 0x%x\n",
 			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
-			? "OTP" : "EEPROM");
+			 ? "OTP" : "EEPROM", eeprom_ver);
 	for (ofs = 0 ; ofs < eeprom_len ; ofs += 16) {
 		pos += scnprintf(buf + pos, buf_size - pos, "0x%.4x ", ofs);
 		hex_dump_to_buffer(ptr + ofs, 16 , 16, 2, buf + pos,
@@ -532,6 +535,8 @@
 		test_bit(STATUS_INT_ENABLED, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
 		test_bit(STATUS_RF_KILL_HW, &priv->status));
+	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n",
+		test_bit(STATUS_CT_KILL, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
 		test_bit(STATUS_INIT, &priv->status));
 	pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
@@ -672,7 +677,6 @@
 	return ret;
 }
 
-#ifdef CONFIG_IWLWIFI_LEDS
 static ssize_t iwl_dbgfs_led_read(struct file *file, char __user *user_buf,
 				  size_t count, loff_t *ppos)
 {
@@ -697,7 +701,6 @@
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	return ret;
 }
-#endif
 
 static ssize_t iwl_dbgfs_thermal_throttling_read(struct file *file,
 				char __user *user_buf,
@@ -798,15 +801,20 @@
 	 * valid here. However, let's not confuse them and present
 	 * IWL_POWER_INDEX_1 as "1", not "0".
 	 */
-	if (value > 0)
+	if (value == 0)
+		return -EINVAL;
+	else if (value > 0)
 		value -= 1;
 
 	if (value != -1 && (value < 0 || value >= IWL_POWER_NUM))
 		return -EINVAL;
 
+	if (!iwl_is_ready_rf(priv))
+		return -EAGAIN;
+
 	priv->power_data.debug_sleep_level_override = value;
 
-	iwl_power_update_mode(priv, false);
+	iwl_power_update_mode(priv, true);
 
 	return count;
 }
@@ -861,9 +869,7 @@
 DEBUGFS_READ_FILE_OPS(status);
 DEBUGFS_READ_WRITE_FILE_OPS(interrupt);
 DEBUGFS_READ_FILE_OPS(qos);
-#ifdef CONFIG_IWLWIFI_LEDS
 DEBUGFS_READ_FILE_OPS(led);
-#endif
 DEBUGFS_READ_FILE_OPS(thermal_throttling);
 DEBUGFS_READ_WRITE_FILE_OPS(disable_ht40);
 DEBUGFS_READ_WRITE_FILE_OPS(sleep_level_override);
@@ -881,10 +887,14 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	char *buf;
 	int bufsz = ((IWL_TRAFFIC_ENTRIES * IWL_TRAFFIC_ENTRY_SIZE * 64) * 2) +
-		(IWL_MAX_NUM_QUEUES * 32 * 8) + 400;
+		(priv->cfg->num_of_queues * 32 * 8) + 400;
 	const u8 *ptr;
 	ssize_t ret;
 
+	if (!priv->txq) {
+		IWL_ERR(priv, "txq not ready\n");
+		return -EAGAIN;
+	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf) {
 		IWL_ERR(priv, "Can not allocate buffer\n");
@@ -976,8 +986,12 @@
 	int pos = 0;
 	int cnt;
 	int ret;
-	const size_t bufsz = sizeof(char) * 60 * IWL_MAX_NUM_QUEUES;
+	const size_t bufsz = sizeof(char) * 60 * priv->cfg->num_of_queues;
 
+	if (!priv->txq) {
+		IWL_ERR(priv, "txq not ready\n");
+		return -EAGAIN;
+	}
 	buf = kzalloc(bufsz, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -1068,10 +1082,10 @@
 		sizeof(struct statistics_rx_non_phy) * 20 +
 		sizeof(struct statistics_rx_ht_phy) * 20 + 400;
 	ssize_t ret;
-	struct statistics_rx_phy *ofdm;
-	struct statistics_rx_phy *cck;
-	struct statistics_rx_non_phy *general;
-	struct statistics_rx_ht_phy *ht;
+	struct statistics_rx_phy *ofdm, *accum_ofdm;
+	struct statistics_rx_phy *cck, *accum_cck;
+	struct statistics_rx_non_phy *general, *accum_general;
+	struct statistics_rx_ht_phy *ht, *accum_ht;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1100,155 +1114,268 @@
 	cck = &priv->statistics.rx.cck;
 	general = &priv->statistics.rx.general;
 	ht = &priv->statistics.rx.ofdm_ht;
+	accum_ofdm = &priv->accum_statistics.rx.ofdm;
+	accum_cck = &priv->accum_statistics.rx.cck;
+	accum_general = &priv->accum_statistics.rx.general;
+	accum_ht = &priv->accum_statistics.rx.ofdm_ht;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
-			 le32_to_cpu(ofdm->ina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
-			 le32_to_cpu(ofdm->fina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(ofdm->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(ofdm->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(ofdm->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(ofdm->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(ofdm->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
-			 le32_to_cpu(ofdm->false_alarm_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
-			 le32_to_cpu(ofdm->fina_sync_err_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
-			 le32_to_cpu(ofdm->sfd_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
-			 le32_to_cpu(ofdm->fina_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
-			 le32_to_cpu(ofdm->unresponded_rts));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_limit_overrun: %u\n",
-			le32_to_cpu(ofdm->rxe_frame_limit_overrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_cts_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(ofdm->sent_ba_rsp_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
-			 le32_to_cpu(ofdm->dsp_self_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(ofdm->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
-			 le32_to_cpu(ofdm->re_acq_main_rssi_sum));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->ina_cnt), accum_ofdm->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->overrun_err),
+			 accum_ofdm->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->early_overrun_err),
+			 accum_ofdm->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->crc32_good),
+			 accum_ofdm->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->false_alarm_cnt),
+			 accum_ofdm->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_sync_err_cnt),
+			 accum_ofdm->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sfd_timeout),
+			 accum_ofdm->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->fina_timeout),
+			 accum_ofdm->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->unresponded_rts),
+			 accum_ofdm->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->rxe_frame_limit_overrun),
+			 accum_ofdm->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_ack_cnt),
+			 accum_ofdm->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_cts_cnt),
+			 accum_ofdm->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->sent_ba_rsp_cnt),
+			 accum_ofdm->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->dsp_self_kill),
+			 accum_ofdm->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->mh_format_err),
+			 accum_ofdm->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ofdm->re_acq_main_rssi_sum),
+			 accum_ofdm->re_acq_main_rssi_sum);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - CCK:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt: %u\n",
-			 le32_to_cpu(cck->ina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt: %u\n",
-			 le32_to_cpu(cck->fina_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(cck->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(cck->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(cck->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(cck->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(cck->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "false_alarm_cnt: %u\n",
-			 le32_to_cpu(cck->false_alarm_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_sync_err_cnt: %u\n",
-			 le32_to_cpu(cck->fina_sync_err_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sfd_timeout: %u\n",
-			 le32_to_cpu(cck->sfd_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "fina_timeout: %u\n",
-			 le32_to_cpu(cck->fina_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "unresponded_rts: %u\n",
-			 le32_to_cpu(cck->unresponded_rts));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"rxe_frame_limit_overrun: %u\n",
-			le32_to_cpu(cck->rxe_frame_limit_overrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ack_cnt: %u\n",
-			 le32_to_cpu(cck->sent_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_cts_cnt: %u\n",
-			 le32_to_cpu(cck->sent_cts_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "sent_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(cck->sent_ba_rsp_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_self_kill: %u\n",
-			 le32_to_cpu(cck->dsp_self_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(cck->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "re_acq_main_rssi_sum: %u\n",
-			 le32_to_cpu(cck->re_acq_main_rssi_sum));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "ina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "fina_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->plcp_err), accum_cck->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->crc32_err), accum_cck->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->overrun_err),
+			 accum_cck->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->early_overrun_err),
+			 accum_cck->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->crc32_good), accum_cck->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "false_alarm_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->false_alarm_cnt),
+			 accum_cck->false_alarm_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_sync_err_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_sync_err_cnt),
+			 accum_cck->fina_sync_err_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sfd_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sfd_timeout),
+			 accum_cck->sfd_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "fina_timeout:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->fina_timeout),
+			 accum_cck->fina_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "unresponded_rts:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->unresponded_rts),
+			 accum_cck->unresponded_rts);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"rxe_frame_lmt_ovrun:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->rxe_frame_limit_overrun),
+			 accum_cck->rxe_frame_limit_overrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_ack_cnt),
+			 accum_cck->sent_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_cts_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_cts_cnt),
+			 accum_cck->sent_cts_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sent_ba_rsp_cnt:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->sent_ba_rsp_cnt),
+			 accum_cck->sent_ba_rsp_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_self_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->dsp_self_kill),
+			 accum_cck->dsp_self_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->mh_format_err),
+			 accum_cck->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "re_acq_main_rssi_sum:\t%u\t\t\t%u\n",
+			 le32_to_cpu(cck->re_acq_main_rssi_sum),
+			 accum_cck->re_acq_main_rssi_sum);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - GENERAL:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts: %u\n",
-			 le32_to_cpu(general->bogus_cts));
-	pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack: %u\n",
-			 le32_to_cpu(general->bogus_ack));
-	pos += scnprintf(buf + pos, bufsz - pos, "non_bssid_frames: %u\n",
-			 le32_to_cpu(general->non_bssid_frames));
-	pos += scnprintf(buf + pos, bufsz - pos, "filtered_frames: %u\n",
-			 le32_to_cpu(general->filtered_frames));
-	pos += scnprintf(buf + pos, bufsz - pos, "non_channel_beacons: %u\n",
-			 le32_to_cpu(general->non_channel_beacons));
-	pos += scnprintf(buf + pos, bufsz - pos, "channel_beacons: %u\n",
-			 le32_to_cpu(general->channel_beacons));
-	pos += scnprintf(buf + pos, bufsz - pos, "num_missed_bcon: %u\n",
-			 le32_to_cpu(general->num_missed_bcon));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"adc_rx_saturation_time: %u\n",
-			le32_to_cpu(general->adc_rx_saturation_time));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "bogus_cts:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->bogus_cts),
+			 accum_general->bogus_cts);
+	pos += scnprintf(buf + pos, bufsz - pos, "bogus_ack:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->bogus_ack),
+			 accum_general->bogus_ack);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"ina_detection_search_time: %u\n",
-			le32_to_cpu(general->ina_detection_search_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_a: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_b: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_silence_rssi_c: %u\n",
-			 le32_to_cpu(general->beacon_silence_rssi_c));
+			 "non_bssid_frames:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->non_bssid_frames),
+			 accum_general->non_bssid_frames);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"interference_data_flag: %u\n",
-			le32_to_cpu(general->interference_data_flag));
-	pos += scnprintf(buf + pos, bufsz - pos, "channel_load: %u\n",
-			 le32_to_cpu(general->channel_load));
-	pos += scnprintf(buf + pos, bufsz - pos, "dsp_false_alarms: %u\n",
-			 le32_to_cpu(general->dsp_false_alarms));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_a: %u\n",
-			 le32_to_cpu(general->beacon_rssi_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_b: %u\n",
-			 le32_to_cpu(general->beacon_rssi_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_rssi_c: %u\n",
-			 le32_to_cpu(general->beacon_rssi_c));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_a: %u\n",
-			 le32_to_cpu(general->beacon_energy_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_b: %u\n",
-			 le32_to_cpu(general->beacon_energy_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "beacon_energy_c: %u\n",
-			 le32_to_cpu(general->beacon_energy_c));
+			 "filtered_frames:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->filtered_frames),
+			 accum_general->filtered_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "non_channel_beacons:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->non_channel_beacons),
+			 accum_general->non_channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "channel_beacons:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->channel_beacons),
+			 accum_general->channel_beacons);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "num_missed_bcon:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->num_missed_bcon),
+			 accum_general->num_missed_bcon);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"adc_rx_saturation_time:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->adc_rx_saturation_time),
+			 accum_general->adc_rx_saturation_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"ina_detect_search_tm:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->ina_detection_search_time),
+			 accum_general->ina_detection_search_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_a:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_a),
+			 accum_general->beacon_silence_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_b:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_b),
+			 accum_general->beacon_silence_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_silence_rssi_c:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_silence_rssi_c),
+			 accum_general->beacon_silence_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"interference_data_flag:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->interference_data_flag),
+			 accum_general->interference_data_flag);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "channel_load:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->channel_load),
+			 accum_general->channel_load);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dsp_false_alarms:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->dsp_false_alarms),
+			 accum_general->dsp_false_alarms);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_a:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_a),
+			 accum_general->beacon_rssi_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_b:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_b),
+			 accum_general->beacon_rssi_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_rssi_c:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_rssi_c),
+			 accum_general->beacon_rssi_c);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_a:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_a),
+			 accum_general->beacon_energy_a);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_b:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_b),
+			 accum_general->beacon_energy_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "beacon_energy_c:\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->beacon_energy_c),
+			 accum_general->beacon_energy_c);
 
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Rx - OFDM_HT:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err: %u\n",
-			 le32_to_cpu(ht->plcp_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "overrun_err: %u\n",
-			 le32_to_cpu(ht->overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "early_overrun_err: %u\n",
-			 le32_to_cpu(ht->early_overrun_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good: %u\n",
-			 le32_to_cpu(ht->crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err: %u\n",
-			 le32_to_cpu(ht->crc32_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "mh_format_err: %u\n",
-			 le32_to_cpu(ht->mh_format_err));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_crc32_good: %u\n",
-			 le32_to_cpu(ht->agg_crc32_good));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_mpdu_cnt: %u\n",
-			 le32_to_cpu(ht->agg_mpdu_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt: %u\n",
-			 le32_to_cpu(ht->agg_cnt));
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "plcp_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->plcp_err), accum_ht->plcp_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "overrun_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->overrun_err), accum_ht->overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "early_overrun_err:\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->early_overrun_err),
+			 accum_ht->early_overrun_err);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->crc32_good), accum_ht->crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos, "crc32_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->crc32_err), accum_ht->crc32_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "mh_format_err:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->mh_format_err),
+			 accum_ht->mh_format_err);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg_crc32_good:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_crc32_good),
+			 accum_ht->agg_crc32_good);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg_mpdu_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_mpdu_cnt),
+			 accum_ht->agg_mpdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos, "agg_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(ht->agg_cnt), accum_ht->agg_cnt);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1264,7 +1391,7 @@
 	char *buf;
 	int bufsz = (sizeof(struct statistics_tx) * 24) + 250;
 	ssize_t ret;
-	struct statistics_tx *tx;
+	struct statistics_tx *tx, *accum_tx;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1290,62 +1417,107 @@
 	 * might not reflect the current uCode activity
 	 */
 	tx = &priv->statistics.tx;
+	accum_tx = &priv->accum_statistics.tx;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_Tx:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "preamble: %u\n",
-			 le32_to_cpu(tx->preamble_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "rx_detected_cnt: %u\n",
-			 le32_to_cpu(tx->rx_detected_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_defer_cnt: %u\n",
-			 le32_to_cpu(tx->bt_prio_defer_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "bt_prio_kill_cnt: %u\n",
-			 le32_to_cpu(tx->bt_prio_kill_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "few_bytes_cnt: %u\n",
-			 le32_to_cpu(tx->few_bytes_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout: %u\n",
-			 le32_to_cpu(tx->cts_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "ack_timeout: %u\n",
-			 le32_to_cpu(tx->ack_timeout));
-	pos += scnprintf(buf + pos, bufsz - pos, "expected_ack_cnt: %u\n",
-			 le32_to_cpu(tx->expected_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "actual_ack_cnt: %u\n",
-			 le32_to_cpu(tx->actual_ack_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "dump_msdu_cnt: %u\n",
-			 le32_to_cpu(tx->dump_msdu_cnt));
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"burst_abort_next_frame_mismatch_cnt: %u\n",
-			le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt));
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "preamble:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->preamble_cnt),
+			 accum_tx->preamble_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"burst_abort_missing_next_frame_cnt: %u\n",
-			le32_to_cpu(tx->burst_abort_missing_next_frame_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "cts_timeout_collision: %u\n",
-			 le32_to_cpu(tx->cts_timeout_collision));
+			 "rx_detected_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->rx_detected_cnt),
+			 accum_tx->rx_detected_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"ack_or_ba_timeout_collision: %u\n",
-			le32_to_cpu(tx->ack_or_ba_timeout_collision));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg ba_timeout: %u\n",
-			 le32_to_cpu(tx->agg.ba_timeout));
+			 "bt_prio_defer_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->bt_prio_defer_cnt),
+			 accum_tx->bt_prio_defer_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg ba_reschedule_frames: %u\n",
-			le32_to_cpu(tx->agg.ba_reschedule_frames));
+			 "bt_prio_kill_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->bt_prio_kill_cnt),
+			 accum_tx->bt_prio_kill_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_agg_frame_cnt: %u\n",
-			le32_to_cpu(tx->agg.scd_query_agg_frame_cnt));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_no_agg: %u\n",
-			 le32_to_cpu(tx->agg.scd_query_no_agg));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg scd_query_agg: %u\n",
-			 le32_to_cpu(tx->agg.scd_query_agg));
+			 "few_bytes_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->few_bytes_cnt),
+			 accum_tx->few_bytes_cnt);
 	pos += scnprintf(buf + pos, bufsz - pos,
-			"agg scd_query_mismatch: %u\n",
-			le32_to_cpu(tx->agg.scd_query_mismatch));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg frame_not_ready: %u\n",
-			 le32_to_cpu(tx->agg.frame_not_ready));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg underrun: %u\n",
-			 le32_to_cpu(tx->agg.underrun));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg bt_prio_kill: %u\n",
-			 le32_to_cpu(tx->agg.bt_prio_kill));
-	pos += scnprintf(buf + pos, bufsz - pos, "agg rx_ba_rsp_cnt: %u\n",
-			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt));
+			 "cts_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "ack_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->ack_timeout),
+			 accum_tx->ack_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "expected_ack_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->expected_ack_cnt),
+			 accum_tx->expected_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "actual_ack_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->actual_ack_cnt),
+			 accum_tx->actual_ack_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "dump_msdu_cnt:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->dump_msdu_cnt),
+			 accum_tx->dump_msdu_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "abort_nxt_frame_mismatch:"
+			 "\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->burst_abort_next_frame_mismatch_cnt),
+			 accum_tx->burst_abort_next_frame_mismatch_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "abort_missing_nxt_frame:"
+			 "\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->burst_abort_missing_next_frame_cnt),
+			 accum_tx->burst_abort_missing_next_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "cts_timeout_collision:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->cts_timeout_collision),
+			 accum_tx->cts_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"ack_ba_timeout_collision:\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->ack_or_ba_timeout_collision),
+			 accum_tx->ack_or_ba_timeout_collision);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg ba_timeout:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.ba_timeout),
+			 accum_tx->agg.ba_timeout);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg ba_resched_frames:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.ba_reschedule_frames),
+			 accum_tx->agg.ba_reschedule_frames);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg scd_query_agg_frame:\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_agg_frame_cnt),
+			 accum_tx->agg.scd_query_agg_frame_cnt);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg scd_query_no_agg:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_no_agg),
+			 accum_tx->agg.scd_query_no_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg scd_query_agg:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_agg),
+			 accum_tx->agg.scd_query_agg);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"agg scd_query_mismatch:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.scd_query_mismatch),
+			 accum_tx->agg.scd_query_mismatch);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg frame_not_ready:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.frame_not_ready),
+			 accum_tx->agg.frame_not_ready);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg underrun:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.underrun),
+			 accum_tx->agg.underrun);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg bt_prio_kill:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.bt_prio_kill),
+			 accum_tx->agg.bt_prio_kill);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "agg rx_ba_rsp_cnt:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(tx->agg.rx_ba_rsp_cnt),
+			 accum_tx->agg.rx_ba_rsp_cnt);
 
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
@@ -1361,9 +1533,9 @@
 	char *buf;
 	int bufsz = sizeof(struct statistics_general) * 4 + 250;
 	ssize_t ret;
-	struct statistics_general *general;
-	struct statistics_dbg *dbg;
-	struct statistics_div *div;
+	struct statistics_general *general, *accum_general;
+	struct statistics_dbg *dbg, *accum_dbg;
+	struct statistics_div *div, *accum_div;
 
 	if (!iwl_is_alive(priv))
 		return -EAGAIN;
@@ -1391,34 +1563,53 @@
 	general = &priv->statistics.general;
 	dbg = &priv->statistics.general.dbg;
 	div = &priv->statistics.general.div;
+	accum_general = &priv->accum_statistics.general;
+	accum_dbg = &priv->accum_statistics.general.dbg;
+	accum_div = &priv->accum_statistics.general.div;
 	pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz);
 	pos += scnprintf(buf + pos, bufsz - pos, "Statistics_General:\n");
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos,
+			"\t\t\tcurrent\t\t\taccumulative\n");
+	pos += scnprintf(buf + pos, bufsz - pos, "temperature:\t\t\t%u\n",
 			 le32_to_cpu(general->temperature));
-	pos += scnprintf(buf + pos, bufsz - pos, "temperature_m: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos, "temperature_m:\t\t\t%u\n",
 			 le32_to_cpu(general->temperature_m));
-	pos += scnprintf(buf + pos, bufsz - pos, "burst_check: %u\n",
-			 le32_to_cpu(dbg->burst_check));
-	pos += scnprintf(buf + pos, bufsz - pos, "burst_count: %u\n",
-			 le32_to_cpu(dbg->burst_count));
-	pos += scnprintf(buf + pos, bufsz - pos, "sleep_time: %u\n",
-			 le32_to_cpu(general->sleep_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "slots_out: %u\n",
-			 le32_to_cpu(general->slots_out));
-	pos += scnprintf(buf + pos, bufsz - pos, "slots_idle: %u\n",
-			 le32_to_cpu(general->slots_idle));
-	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp: %u\n",
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "burst_check:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(dbg->burst_check),
+			 accum_dbg->burst_check);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "burst_count:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(dbg->burst_count),
+			 accum_dbg->burst_count);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "sleep_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->sleep_time),
+			 accum_general->sleep_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "slots_out:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->slots_out),
+			 accum_general->slots_out);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "slots_idle:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->slots_idle),
+			 accum_general->slots_idle);
+	pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n",
 			 le32_to_cpu(general->ttl_timestamp));
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a: %u\n",
-			 le32_to_cpu(div->tx_on_a));
-	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b: %u\n",
-			 le32_to_cpu(div->tx_on_b));
-	pos += scnprintf(buf + pos, bufsz - pos, "exec_time: %u\n",
-			 le32_to_cpu(div->exec_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "probe_time: %u\n",
-			 le32_to_cpu(div->probe_time));
-	pos += scnprintf(buf + pos, bufsz - pos, "rx_enable_counter: %u\n",
-			 le32_to_cpu(general->rx_enable_counter));
+	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_a:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->tx_on_a), accum_div->tx_on_a);
+	pos += scnprintf(buf + pos, bufsz - pos, "tx_on_b:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->tx_on_b), accum_div->tx_on_b);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "exec_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->exec_time), accum_div->exec_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "probe_time:\t\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(div->probe_time), accum_div->probe_time);
+	pos += scnprintf(buf + pos, bufsz - pos,
+			 "rx_enable_counter:\t\t%u\t\t\t%u\n",
+			 le32_to_cpu(general->rx_enable_counter),
+			 accum_general->rx_enable_counter);
 	ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 	kfree(buf);
 	return ret;
@@ -1614,6 +1805,29 @@
 	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
 }
 
+static ssize_t iwl_dbgfs_power_save_status_read(struct file *file,
+						    char __user *user_buf,
+						    size_t count, loff_t *ppos)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)file->private_data;
+	char buf[60];
+	int pos = 0;
+	const size_t bufsz = sizeof(buf);
+	u32 pwrsave_status;
+
+	pwrsave_status = iwl_read32(priv, CSR_GP_CNTRL) &
+			CSR_GP_REG_POWER_SAVE_STATUS_MSK;
+
+	pos += scnprintf(buf + pos, bufsz - pos, "Power Save Status: ");
+	pos += scnprintf(buf + pos, bufsz - pos, "%s\n",
+		(pwrsave_status == CSR_GP_REG_NO_POWER_SAVE) ? "none" :
+		(pwrsave_status == CSR_GP_REG_MAC_POWER_SAVE) ? "MAC" :
+		(pwrsave_status == CSR_GP_REG_PHY_POWER_SAVE) ? "PHY" :
+		"error");
+
+	return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
+}
+
 DEBUGFS_READ_WRITE_FILE_OPS(rx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(tx_statistics);
 DEBUGFS_READ_WRITE_FILE_OPS(traffic_log);
@@ -1625,6 +1839,7 @@
 DEBUGFS_READ_FILE_OPS(sensitivity);
 DEBUGFS_READ_FILE_OPS(chain_noise);
 DEBUGFS_READ_FILE_OPS(tx_power);
+DEBUGFS_READ_FILE_OPS(power_save_status);
 
 /*
  * Create the debugfs files and directories
@@ -1661,9 +1876,7 @@
 	DEBUGFS_ADD_FILE(status, data);
 	DEBUGFS_ADD_FILE(interrupt, data);
 	DEBUGFS_ADD_FILE(qos, data);
-#ifdef CONFIG_IWLWIFI_LEDS
 	DEBUGFS_ADD_FILE(led, data);
-#endif
 	DEBUGFS_ADD_FILE(sleep_level_override, data);
 	DEBUGFS_ADD_FILE(current_sleep_command, data);
 	DEBUGFS_ADD_FILE(thermal_throttling, data);
@@ -1674,6 +1887,7 @@
 	DEBUGFS_ADD_FILE(rx_queue, debug);
 	DEBUGFS_ADD_FILE(tx_queue, debug);
 	DEBUGFS_ADD_FILE(tx_power, debug);
+	DEBUGFS_ADD_FILE(power_save_status, debug);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_ADD_FILE(ucode_rx_stats, debug);
 		DEBUGFS_ADD_FILE(ucode_tx_stats, debug);
@@ -1716,9 +1930,7 @@
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_status);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_interrupt);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_qos);
-#ifdef CONFIG_IWLWIFI_LEDS
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_led);
-#endif
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_thermal_throttling);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_data_files.file_disable_ht40);
 	DEBUGFS_REMOVE(priv->dbgfs->dir_data);
@@ -1728,6 +1940,7 @@
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_rx_queue);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_queue);
 	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_tx_power);
+	DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.file_power_save_status);
 	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) != CSR_HW_REV_TYPE_3945) {
 		DEBUGFS_REMOVE(priv->dbgfs->dbgfs_debug_files.
 			file_ucode_rx_stats);
diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h
index 028d505..e7ce673 100644
--- a/drivers/net/wireless/iwlwifi/iwl-dev.h
+++ b/drivers/net/wireless/iwlwifi/iwl-dev.h
@@ -43,7 +43,6 @@
 #include "iwl-debug.h"
 #include "iwl-4965-hw.h"
 #include "iwl-3945-hw.h"
-#include "iwl-3945-led.h"
 #include "iwl-led.h"
 #include "iwl-power.h"
 #include "iwl-agn-rs.h"
@@ -57,17 +56,22 @@
 extern struct iwl_cfg iwl5100_abg_cfg;
 extern struct iwl_cfg iwl5150_agn_cfg;
 extern struct iwl_cfg iwl6000h_2agn_cfg;
+extern struct iwl_cfg iwl6000h_2abg_cfg;
+extern struct iwl_cfg iwl6000h_2bg_cfg;
 extern struct iwl_cfg iwl6000i_2agn_cfg;
+extern struct iwl_cfg iwl6000i_2abg_cfg;
+extern struct iwl_cfg iwl6000i_2bg_cfg;
 extern struct iwl_cfg iwl6000_3agn_cfg;
 extern struct iwl_cfg iwl6050_2agn_cfg;
+extern struct iwl_cfg iwl6050_2abg_cfg;
 extern struct iwl_cfg iwl6050_3agn_cfg;
 extern struct iwl_cfg iwl1000_bgn_cfg;
+extern struct iwl_cfg iwl1000_bg_cfg;
 
 struct iwl_tx_queue;
 
 /* shared structures from iwl-5000.c */
 extern struct iwl_mod_params iwl50_mod_params;
-extern struct iwl_ops iwl5000_ops;
 extern struct iwl_ucode_ops iwl5000_ucode;
 extern struct iwl_lib_ops iwl5000_lib;
 extern struct iwl_hcmd_ops iwl5000_hcmd;
@@ -81,9 +85,6 @@
 				    __le32 *tx_flags);
 extern int iwl5000_calc_rssi(struct iwl_priv *priv,
 			     struct iwl_rx_phy_res *rx_resp);
-extern int iwl5000_apm_init(struct iwl_priv *priv);
-extern void iwl5000_apm_stop(struct iwl_priv *priv);
-extern int iwl5000_apm_reset(struct iwl_priv *priv);
 extern void iwl5000_nic_config(struct iwl_priv *priv);
 extern u16 iwl5000_eeprom_calib_version(struct iwl_priv *priv);
 extern const u8 *iwl5000_eeprom_query_addr(const struct iwl_priv *priv,
@@ -144,12 +145,13 @@
 #define	DEFAULT_LONG_RETRY_LIMIT  4U
 
 struct iwl_rx_mem_buffer {
-	dma_addr_t real_dma_addr;
-	dma_addr_t aligned_dma_addr;
-	struct sk_buff *skb;
+	dma_addr_t page_dma;
+	struct page *page;
 	struct list_head list;
 };
 
+#define rxb_addr(r) page_address(r->page)
+
 /* defined below */
 struct iwl_device_cmd;
 
@@ -165,7 +167,7 @@
 	 */
 	void (*callback)(struct iwl_priv *priv,
 			 struct iwl_device_cmd *cmd,
-			 struct sk_buff *skb);
+			 struct iwl_rx_packet *pkt);
 
 	/* The CMD_SIZE_HUGE flag bit indicates that the command
 	 * structure is stored at the end of the shared queue memory. */
@@ -321,6 +323,12 @@
  * queue, 2 (unused) HCCA queues, and 4 HT queues (one for each AC) */
 #define IWL_MIN_NUM_QUEUES	10
 
+/*
+ * uCode queue management definitions ...
+ * Queue #4 is the command queue for 3945/4965/5x00/1000/6x00.
+ */
+#define IWL_CMD_QUEUE_NUM	4
+
 /* Power management (not Tx power) structures */
 
 enum iwl_pwr_src {
@@ -356,7 +364,14 @@
 	CMD_WANT_SKB = (1 << 2),
 };
 
-#define IWL_CMD_MAX_PAYLOAD 320
+#define DEF_CMD_PAYLOAD_SIZE 320
+
+/*
+ * IWL_LINK_HDR_MAX should include ieee80211_hdr, radiotap header,
+ * SNAP header and alignment. It should also be big enough for 802.11
+ * control frames.
+ */
+#define IWL_LINK_HDR_MAX 64
 
 /**
  * struct iwl_device_cmd
@@ -373,7 +388,8 @@
 		u16 val16;
 		u32 val32;
 		struct iwl_tx_cmd tx;
-		u8 payload[IWL_CMD_MAX_PAYLOAD];
+		struct iwl6000_channel_switch_cmd chswitch;
+		u8 payload[DEF_CMD_PAYLOAD_SIZE];
 	} __attribute__ ((packed)) cmd;
 } __attribute__ ((packed));
 
@@ -382,21 +398,15 @@
 
 struct iwl_host_cmd {
 	const void *data;
-	struct sk_buff *reply_skb;
+	unsigned long reply_page;
 	void (*callback)(struct iwl_priv *priv,
 			 struct iwl_device_cmd *cmd,
-			 struct sk_buff *skb);
+			 struct iwl_rx_packet *pkt);
 	u32 flags;
 	u16 len;
 	u8 id;
 };
 
-/*
- * RX related structures and functions
- */
-#define RX_FREE_BUFFERS 64
-#define RX_LOW_WATERMARK 8
-
 #define SUP_RATE_11A_MAX_NUM_CHANNELS  8
 #define SUP_RATE_11B_MAX_NUM_CHANNELS  4
 #define SUP_RATE_11G_MAX_NUM_CHANNELS  12
@@ -502,12 +512,11 @@
 #define CFG_HT_MPDU_DENSITY_4USEC   (0x5)
 #define CFG_HT_MPDU_DENSITY_DEF CFG_HT_MPDU_DENSITY_4USEC
 
-struct iwl_ht_info {
+struct iwl_ht_config {
 	/* self configuration data */
-	u8 is_ht;
-	u8 supported_chan_width;
-	u8 sm_ps;
-	struct ieee80211_mcs_info mcs;
+	bool is_ht;
+	bool is_40mhz;
+	bool single_chain_sufficient;
 	/* BSS related data */
 	u8 extension_chan_offset;
 	u8 ht_protection;
@@ -561,6 +570,19 @@
 	struct iwl_hw_key keyinfo;
 };
 
+/*
+ * iwl_station_priv: Driver's private station information
+ *
+ * When mac80211 creates a station it reserves some space (hw->sta_data_size)
+ * in the structure for use by driver. This structure is places in that
+ * space.
+ *
+ * At the moment use it for the station's rate scaling information.
+ */
+struct iwl_station_priv {
+	struct iwl_lq_sta lq_sta;
+};
+
 /* one for each uCode image (inst/data, boot/init/runtime) */
 struct fw_desc {
 	void *v_addr;		/* access by driver */
@@ -622,6 +644,10 @@
 	u16 auto_corr_max_cck_mrc;
 	u16 auto_corr_min_cck;
 	u16 auto_corr_min_cck_mrc;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
 };
 
 
@@ -639,7 +665,7 @@
  * @valid_tx/rx_ant: usable antennas
  * @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
  * @max_rxq_log: Log-base-2 of max_rxq_size
- * @rx_buf_size: Rx buffer size
+ * @rx_page_order: Rx buffer page order
  * @rx_wrt_ptr_reg: FH{39}_RSCSR_CHNL0_WPTR
  * @max_stations:
  * @bcast_sta_id:
@@ -662,9 +688,8 @@
 	u8  valid_rx_ant;
 	u16 max_rxq_size;
 	u16 max_rxq_log;
-	u32 rx_buf_size;
+	u32 rx_page_order;
 	u32 rx_wrt_ptr_reg;
-	u32 max_pkt_size;
 	u8  max_stations;
 	u8  bcast_sta_id;
 	u8  ht40_channel;
@@ -711,7 +736,11 @@
 
 static inline u8 get_cmd_index(struct iwl_queue *q, u32 index, int is_huge)
 {
-	/* This is for scan command, the big buffer at end of command array */
+	/*
+	 * This is for init calibration result and scan command which
+	 * required buffer > TFD_MAX_PAYLOAD_SIZE,
+	 * the big buffer at end of command array
+	 */
 	if (is_huge)
 		return q->n_window;	/* must be power of 2 */
 
@@ -726,9 +755,6 @@
 	size_t size;
 };
 
-#define IWL_CHANNEL_WIDTH_20MHZ   0
-#define IWL_CHANNEL_WIDTH_40MHZ   1
-
 #define IWL_OPERATION_MODE_AUTO     0
 #define IWL_OPERATION_MODE_HT_ONLY  1
 #define IWL_OPERATION_MODE_MIXED    2
@@ -741,7 +767,8 @@
 
 /* Sensitivity and chain noise calibration */
 #define INITIALIZATION_VALUE		0xFFFF
-#define CAL_NUM_OF_BEACONS		20
+#define IWL4965_CAL_NUM_BEACONS		20
+#define IWL_CAL_NUM_BEACONS		16
 #define MAXIMUM_ALLOWED_PATHLOSS	15
 
 #define CHAIN_NOISE_MAX_DELTA_GAIN_CODE 3
@@ -845,6 +872,10 @@
 	s32 nrg_auto_corr_silence_diff;
 	u32 num_in_cck_no_fa;
 	u32 nrg_th_ofdm;
+
+	u16 barker_corr_th_min;
+	u16 barker_corr_th_min_mrc;
+	u16 nrg_th_cca;
 };
 
 /* Chain noise (differential Rx gain) calib data */
@@ -961,8 +992,6 @@
 };
 #endif
 
-#define IWL_MAX_NUM_QUEUES	20 /* FIXME: do dynamic allocation */
-
 struct iwl_priv {
 
 	/* ieee device used by generic ieee processing code */
@@ -976,7 +1005,7 @@
 	int frames_count;
 
 	enum ieee80211_band band;
-	int alloc_rxb_skb;
+	int alloc_rxb_page;
 
 	void (*rx_handlers[REPLY_MAX])(struct iwl_priv *priv,
 				       struct iwl_rx_mem_buffer *rxb);
@@ -1063,14 +1092,11 @@
 	struct iwl_init_alive_resp card_alive_init;
 	struct iwl_alive_resp card_alive;
 
-#ifdef CONFIG_IWLWIFI_LEDS
 	unsigned long last_blink_time;
 	u8 last_blink_rate;
 	u8 allow_blinking;
 	u64 led_tpt;
-	struct iwl_led led[IWL_LED_TRG_MAX];
-	unsigned int rxtxpackets;
-#endif
+
 	u16 active_rate;
 	u16 active_rate_basic;
 
@@ -1080,11 +1106,10 @@
 	struct iwl_chain_noise_data chain_noise_data;
 	__le16 sensitivity_tbl[HD_TABLE_SIZE];
 
-	struct iwl_ht_info current_ht_config;
+	struct iwl_ht_config current_ht_config;
 	u8 last_phy_res[100];
 
 	/* Rate scaling data */
-	s8 data_retry_limit;
 	u8 retry_rate;
 
 	wait_queue_head_t wait_command_queue;
@@ -1093,7 +1118,7 @@
 
 	/* Rx and Tx DMA processing queues */
 	struct iwl_rx_queue rxq;
-	struct iwl_tx_queue txq[IWL_MAX_NUM_QUEUES];
+	struct iwl_tx_queue *txq;
 	unsigned long txq_ctx_active_msk;
 	struct iwl_dma_ptr  kw;	/* keep warm address */
 	struct iwl_dma_ptr  scd_bc_tbls;
@@ -1116,7 +1141,9 @@
 	struct iwl_tt_mgmt thermal_throttle;
 
 	struct iwl_notif_statistics statistics;
-	unsigned long last_statistics_time;
+#ifdef CONFIG_IWLWIFI_DEBUG
+	struct iwl_notif_statistics accum_statistics;
+#endif
 
 	/* context information */
 	u16 rates_mask;
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.c b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
new file mode 100644
index 0000000..4ef5aca
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.c
@@ -0,0 +1,13 @@
+#include <linux/module.h>
+
+/* sparse doesn't like tracepoint macros */
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "iwl-devtrace.h"
+
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ioread32);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_iowrite32);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_rx);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_event);
+EXPORT_TRACEPOINT_SYMBOL(iwlwifi_dev_ucode_error);
+#endif
diff --git a/drivers/net/wireless/iwlwifi/iwl-devtrace.h b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
new file mode 100644
index 0000000..8c71592
--- /dev/null
+++ b/drivers/net/wireless/iwlwifi/iwl-devtrace.h
@@ -0,0 +1,178 @@
+#if !defined(__IWLWIFI_DEVICE_TRACE) || defined(TRACE_HEADER_MULTI_READ)
+#define __IWLWIFI_DEVICE_TRACE
+
+#include <linux/tracepoint.h>
+#include "iwl-dev.h"
+
+#if !defined(CONFIG_IWLWIFI_DEVICE_TRACING) || defined(__CHECKER__)
+#undef TRACE_EVENT
+#define TRACE_EVENT(name, proto, ...) \
+static inline void trace_ ## name(proto) {}
+#endif
+
+#define PRIV_ENTRY	__field(struct iwl_priv *, priv)
+#define PRIV_ASSIGN	__entry->priv = priv
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM iwlwifi
+
+TRACE_EVENT(iwlwifi_dev_ioread32,
+	TP_PROTO(struct iwl_priv *priv, u32 offs, u32 val),
+	TP_ARGS(priv, offs, val),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, offs)
+		__field(u32, val)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->offs = offs;
+		__entry->val = val;
+	),
+	TP_printk("[%p] read io[%#x] = %#x", __entry->priv, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(iwlwifi_dev_iowrite32,
+	TP_PROTO(struct iwl_priv *priv, u32 offs, u32 val),
+	TP_ARGS(priv, offs, val),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, offs)
+		__field(u32, val)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->offs = offs;
+		__entry->val = val;
+	),
+	TP_printk("[%p] write io[%#x] = %#x)", __entry->priv, __entry->offs, __entry->val)
+);
+
+TRACE_EVENT(iwlwifi_dev_hcmd,
+	TP_PROTO(struct iwl_priv *priv, void *hcmd, size_t len, u32 flags),
+	TP_ARGS(priv, hcmd, len, flags),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__dynamic_array(u8, hcmd, len)
+		__field(u32, flags)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		memcpy(__get_dynamic_array(hcmd), hcmd, len);
+		__entry->flags = flags;
+	),
+	TP_printk("[%p] hcmd %#.2x (%ssync)",
+		  __entry->priv, ((u8 *)__get_dynamic_array(hcmd))[0],
+		  __entry->flags & CMD_ASYNC ? "a" : "")
+);
+
+TRACE_EVENT(iwlwifi_dev_rx,
+	TP_PROTO(struct iwl_priv *priv, void *rxbuf, size_t len),
+	TP_ARGS(priv, rxbuf, len),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__dynamic_array(u8, rxbuf, len)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		memcpy(__get_dynamic_array(rxbuf), rxbuf, len);
+	),
+	TP_printk("[%p] RX cmd %#.2x",
+		  __entry->priv, ((u8 *)__get_dynamic_array(rxbuf))[4])
+);
+
+TRACE_EVENT(iwlwifi_dev_tx,
+	TP_PROTO(struct iwl_priv *priv, void *tfd, size_t tfdlen,
+		 void *buf0, size_t buf0_len,
+		 void *buf1, size_t buf1_len),
+	TP_ARGS(priv, tfd, tfdlen, buf0, buf0_len, buf1, buf1_len),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(size_t, framelen)
+		__dynamic_array(u8, tfd, tfdlen)
+
+		/*
+		 * Do not insert between or below these items,
+		 * we want to keep the frame together (except
+		 * for the possible padding).
+		 */
+		__dynamic_array(u8, buf0, buf0_len)
+		__dynamic_array(u8, buf1, buf1_len)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->framelen = buf0_len + buf1_len;
+		memcpy(__get_dynamic_array(tfd), tfd, tfdlen);
+		memcpy(__get_dynamic_array(buf0), buf0, buf0_len);
+		memcpy(__get_dynamic_array(buf1), buf1, buf0_len);
+	),
+	TP_printk("[%p] TX %.2x (%zu bytes)",
+		  __entry->priv,
+		  ((u8 *)__get_dynamic_array(buf0))[0],
+		  __entry->framelen)
+);
+
+TRACE_EVENT(iwlwifi_dev_ucode_error,
+	TP_PROTO(struct iwl_priv *priv, u32 desc, u32 time,
+		 u32 data1, u32 data2, u32 line, u32 blink1,
+		 u32 blink2, u32 ilink1, u32 ilink2),
+	TP_ARGS(priv, desc, time, data1, data2, line,
+		blink1, blink2, ilink1, ilink2),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+		__field(u32, desc)
+		__field(u32, time)
+		__field(u32, data1)
+		__field(u32, data2)
+		__field(u32, line)
+		__field(u32, blink1)
+		__field(u32, blink2)
+		__field(u32, ilink1)
+		__field(u32, ilink2)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->desc = desc;
+		__entry->time = time;
+		__entry->data1 = data1;
+		__entry->data2 = data2;
+		__entry->line = line;
+		__entry->blink1 = blink1;
+		__entry->blink2 = blink2;
+		__entry->ilink1 = ilink1;
+		__entry->ilink2 = ilink2;
+	),
+	TP_printk("[%p] #%02d %010u data 0x%08X 0x%08X line %u, "
+		  "blink 0x%05X 0x%05X ilink 0x%05X 0x%05X",
+		  __entry->priv, __entry->desc, __entry->time, __entry->data1,
+		  __entry->data2, __entry->line, __entry->blink1,
+		  __entry->blink2, __entry->ilink1, __entry->ilink2)
+);
+
+TRACE_EVENT(iwlwifi_dev_ucode_event,
+	TP_PROTO(struct iwl_priv *priv, u32 time, u32 data, u32 ev),
+	TP_ARGS(priv, time, data, ev),
+	TP_STRUCT__entry(
+		PRIV_ENTRY
+
+		__field(u32, time)
+		__field(u32, data)
+		__field(u32, ev)
+	),
+	TP_fast_assign(
+		PRIV_ASSIGN;
+		__entry->time = time;
+		__entry->data = data;
+		__entry->ev = ev;
+	),
+	TP_printk("[%p] EVT_LOGT:%010u:0x%08x:%04u",
+		  __entry->priv, __entry->time, __entry->data, __entry->ev)
+);
+#endif /* __IWLWIFI_DEVICE_TRACE */
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE iwl-devtrace
+#include <trace/define_trace.h>
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index e14c995..9429cb1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -215,12 +215,35 @@
 
 int iwlcore_eeprom_verify_signature(struct iwl_priv *priv)
 {
-	u32 gp = iwl_read32(priv, CSR_EEPROM_GP);
-	if ((gp & CSR_EEPROM_GP_VALID_MSK) == CSR_EEPROM_GP_BAD_SIGNATURE) {
-		IWL_ERR(priv, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
-		return -ENOENT;
+	u32 gp = iwl_read32(priv, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
+	int ret = 0;
+
+	IWL_DEBUG_INFO(priv, "EEPROM signature=0x%08x\n", gp);
+	switch (gp) {
+	case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
+		if (priv->nvm_device_type != NVM_DEVICE_TYPE_OTP) {
+			IWL_ERR(priv, "EEPROM with bad signature: 0x%08x\n",
+				gp);
+			ret = -ENOENT;
+		}
+		break;
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
+	case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
+		if (priv->nvm_device_type != NVM_DEVICE_TYPE_EEPROM) {
+			IWL_ERR(priv, "OTP with bad signature: 0x%08x\n", gp);
+			ret = -ENOENT;
+		}
+		break;
+	case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
+	default:
+		IWL_ERR(priv, "bad EEPROM/OTP signature, type=%s, "
+			"EEPROM_GP=0x%08x\n",
+			(priv->nvm_device_type == NVM_DEVICE_TYPE_OTP)
+			? "OTP" : "EEPROM", gp);
+		ret = -ENOENT;
+		break;
 	}
-	return 0;
+	return ret;
 }
 EXPORT_SYMBOL(iwlcore_eeprom_verify_signature);
 
@@ -283,7 +306,8 @@
 			    CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
 
 		/* See if we got it */
-		ret = iwl_poll_direct_bit(priv, CSR_HW_IF_CONFIG_REG,
+		ret = iwl_poll_bit(priv, CSR_HW_IF_CONFIG_REG,
+				CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 				CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
 				EEPROM_SEM_TIMEOUT);
 		if (ret >= 0) {
@@ -322,7 +346,8 @@
 		     CSR_GP_CNTRL_REG_FLAG_INIT_DONE);
 
 	/* wait for clock to be ready */
-	ret = iwl_poll_direct_bit(priv, CSR_GP_CNTRL,
+	ret = iwl_poll_bit(priv, CSR_GP_CNTRL,
+				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 				  CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
 				  25000);
 	if (ret < 0)
@@ -333,6 +358,14 @@
 		udelay(5);
 		iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG,
 				    APMG_PS_CTRL_VAL_RESET_REQ);
+
+		/*
+		 * CSR auto clock gate disable bit -
+		 * this is only applicable for HW with OTP shadow RAM
+		 */
+		if (priv->cfg->shadow_ram_support)
+			iwl_set_bit(priv, CSR_DBG_LINK_PWR_MGMT_REG,
+				CSR_RESET_LINK_PWR_MGMT_DISABLED);
 	}
 	return ret;
 }
@@ -345,7 +378,8 @@
 
 	_iwl_write32(priv, CSR_EEPROM_REG,
 		     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
-	ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+	ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+				  CSR_EEPROM_REG_READ_VALID_MSK,
 				  CSR_EEPROM_REG_READ_VALID_MSK,
 				  IWL_EEPROM_ACCESS_TIMEOUT);
 	if (ret < 0) {
@@ -537,7 +571,8 @@
 			_iwl_write32(priv, CSR_EEPROM_REG,
 				     CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
 
-			ret = iwl_poll_direct_bit(priv, CSR_EEPROM_REG,
+			ret = iwl_poll_bit(priv, CSR_EEPROM_REG,
+						  CSR_EEPROM_REG_READ_VALID_MSK,
 						  CSR_EEPROM_REG_READ_VALID_MSK,
 						  IWL_EEPROM_ACCESS_TIMEOUT);
 			if (ret < 0) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 80b9e45..5ba5a4e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -63,6 +63,8 @@
 #ifndef __iwl_eeprom_h__
 #define __iwl_eeprom_h__
 
+#include <net/mac80211.h>
+
 struct iwl_priv;
 
 /*
@@ -256,6 +258,15 @@
 #define EEPROM_5050_TX_POWER_VERSION    (4)
 #define EEPROM_5050_EEPROM_VERSION	(0x21E)
 
+/* 1000 Specific */
+#define EEPROM_1000_EEPROM_VERSION	(0x15C)
+
+/* 6x00 Specific */
+#define EEPROM_6000_EEPROM_VERSION	(0x434)
+
+/* 6x50 Specific */
+#define EEPROM_6050_EEPROM_VERSION	(0x532)
+
 /* OTP */
 /* lower blocks contain EEPROM image and calibration data */
 #define OTP_LOW_IMAGE_SIZE		(2 * 512 * sizeof(u16)) /* 2 KB */
@@ -370,12 +381,10 @@
 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1)	/* 9  bytes */
 #define EEPROM_VERSION                      (2*0x44)	/* 2  bytes */
 #define EEPROM_SKU_CAP                      (2*0x45)	/* 1  bytes */
-#define EEPROM_LEDS_MODE                    (2*0x45+1)	/* 1  bytes */
 #define EEPROM_OEM_MODE                     (2*0x46)	/* 2  bytes */
 #define EEPROM_WOWLAN_MODE                  (2*0x47)	/* 2  bytes */
 #define EEPROM_RADIO_CONFIG                 (2*0x48)	/* 2  bytes */
 #define EEPROM_3945_M_VERSION               (2*0x4A)	/* 1  bytes */
-#define EEPROM_ANTENNA_SWITCH_TYPE          (2*0x4A+1)	/* 1  bytes */
 
 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
 #define EEPROM_RF_CFG_TYPE_MSK(x)   (x & 0x3)         /* bits 0-1   */
@@ -387,7 +396,12 @@
 
 #define EEPROM_3945_RF_CFG_TYPE_MAX  0x0
 #define EEPROM_4965_RF_CFG_TYPE_MAX  0x1
-#define EEPROM_5000_RF_CFG_TYPE_MAX  0x3
+
+/* Radio Config for 5000 and up */
+#define EEPROM_RF_CONFIG_TYPE_R3x3	0x0
+#define EEPROM_RF_CONFIG_TYPE_R2x2	0x1
+#define EEPROM_RF_CONFIG_TYPE_R1x2	0x2
+#define EEPROM_RF_CONFIG_TYPE_MAX	0x3
 
 /*
  * Per-channel regulatory data.
diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
index 532c8d6..f2a60dc 100644
--- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c
@@ -92,6 +92,8 @@
 		IWL_CMD(CALIBRATION_RES_NOTIFICATION);
 		IWL_CMD(CALIBRATION_COMPLETE_NOTIFICATION);
 		IWL_CMD(REPLY_TX_POWER_DBM_CMD);
+		IWL_CMD(TEMPERATURE_NOTIFICATION);
+		IWL_CMD(TX_ANT_CONFIGURATION_CMD);
 	default:
 		return "UNKNOWN";
 
@@ -103,17 +105,8 @@
 
 static void iwl_generic_cmd_callback(struct iwl_priv *priv,
 				     struct iwl_device_cmd *cmd,
-				     struct sk_buff *skb)
+				     struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *pkt = NULL;
-
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in %s.\n",
-				get_cmd_string(cmd->hdr.cmd));
-		return;
-	}
-
-	pkt = (struct iwl_rx_packet *)skb->data;
 	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from %s (0x%08X)\n",
 			get_cmd_string(cmd->hdr.cmd), pkt->hdr.flags);
@@ -215,7 +208,7 @@
 		ret = -EIO;
 		goto fail;
 	}
-	if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_skb) {
+	if ((cmd->flags & CMD_WANT_SKB) && !cmd->reply_page) {
 		IWL_ERR(priv, "Error: Response NULL in '%s'\n",
 			  get_cmd_string(cmd->id));
 		ret = -EIO;
@@ -237,9 +230,9 @@
 							~CMD_WANT_SKB;
 	}
 fail:
-	if (cmd->reply_skb) {
-		dev_kfree_skb_any(cmd->reply_skb);
-		cmd->reply_skb = NULL;
+	if (cmd->reply_page) {
+		free_pages(cmd->reply_page, priv->hw_params.rx_page_order);
+		cmd->reply_page = 0;
 	}
 out:
 	clear_bit(STATUS_HCMD_SYNC_ACTIVE, &priv->status);
@@ -272,7 +265,7 @@
 			   u8 id, u16 len, const void *data,
 			   void (*callback)(struct iwl_priv *priv,
 					    struct iwl_device_cmd *cmd,
-					    struct sk_buff *skb))
+					    struct iwl_rx_packet *pkt))
 {
 	struct iwl_host_cmd cmd = {
 		.id = id,
diff --git a/drivers/net/wireless/iwlwifi/iwl-io.h b/drivers/net/wireless/iwlwifi/iwl-io.h
index d30cb02..0a078b0 100644
--- a/drivers/net/wireless/iwlwifi/iwl-io.h
+++ b/drivers/net/wireless/iwlwifi/iwl-io.h
@@ -32,6 +32,7 @@
 #include <linux/io.h>
 
 #include "iwl-debug.h"
+#include "iwl-devtrace.h"
 
 /*
  * IO, register, and NIC memory access functions
@@ -61,7 +62,12 @@
  *
  */
 
-#define _iwl_write32(priv, ofs, val) iowrite32((val), (priv)->hw_base + (ofs))
+static inline void _iwl_write32(struct iwl_priv *priv, u32 ofs, u32 val)
+{
+	trace_iwlwifi_dev_iowrite32(priv, ofs, val);
+	iowrite32(val, priv->hw_base + ofs);
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline void __iwl_write32(const char *f, u32 l, struct iwl_priv *priv,
 				 u32 ofs, u32 val)
@@ -75,7 +81,13 @@
 #define iwl_write32(priv, ofs, val) _iwl_write32(priv, ofs, val)
 #endif
 
-#define _iwl_read32(priv, ofs) ioread32((priv)->hw_base + (ofs))
+static inline u32 _iwl_read32(struct iwl_priv *priv, u32 ofs)
+{
+	u32 val = ioread32(priv->hw_base + ofs);
+	trace_iwlwifi_dev_ioread32(priv, ofs, val);
+	return val;
+}
+
 #ifdef CONFIG_IWLWIFI_DEBUG
 static inline u32 __iwl_read32(char *f, u32 l, struct iwl_priv *priv, u32 ofs)
 {
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.c b/drivers/net/wireless/iwlwifi/iwl-led.c
index f420c99..478c905 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-led.c
@@ -42,15 +42,11 @@
 #include "iwl-core.h"
 #include "iwl-io.h"
 
-#ifdef CONFIG_IWLWIFI_DEBUG
-static const char *led_type_str[] = {
-	__stringify(IWL_LED_TRG_TX),
-	__stringify(IWL_LED_TRG_RX),
-	__stringify(IWL_LED_TRG_ASSOC),
-	__stringify(IWL_LED_TRG_RADIO),
-	NULL
-};
-#endif /* CONFIG_IWLWIFI_DEBUG */
+/* default: IWL_LED_BLINK(0) using blinking index table */
+static int led_mode;
+module_param(led_mode, int, S_IRUGO);
+MODULE_PARM_DESC(led_mode, "led mode: 0=blinking, 1=On(RF On)/Off(RF Off), "
+			   "(default 0)\n");
 
 
 static const struct {
@@ -65,11 +61,11 @@
 	{70, 65, 65},
 	{50, 75, 75},
 	{20, 85, 85},
-	{15, 95, 95 },
-	{10, 110, 110},
-	{5, 130, 130},
+	{10, 95, 95},
+	{5, 110, 110},
+	{1, 130, 130},
 	{0, 167, 167},
-/* SOLID_ON */
+	/* SOLID_ON */
 	{-1, IWL_LED_SOLID, 0}
 };
 
@@ -78,102 +74,68 @@
 #define IWL_MAX_BLINK_TBL (ARRAY_SIZE(blink_tbl) - 1) /* exclude SOLID_ON */
 #define IWL_SOLID_BLINK_IDX (ARRAY_SIZE(blink_tbl) - 1)
 
-/*  [0-256] -> [0..8] FIXME: we need [0..10] */
-static inline int iwl_brightness_to_idx(enum led_brightness brightness)
+/*
+ * Adjust led blink rate to compensate on a MAC Clock difference on every HW
+ * Led blink rate analysis showed an average deviation of 0% on 3945,
+ * 5% on 4965 HW and 20% on 5000 series and up.
+ * Need to compensate on the led on/off time per HW according to the deviation
+ * to achieve the desired led frequency
+ * The calculation is: (100-averageDeviation)/100 * blinkTime
+ * For code efficiency the calculation will be:
+ *     compensation = (100 - averageDeviation) * 64 / 100
+ *     NewBlinkTime = (compensation * BlinkTime) / 64
+ */
+static inline u8 iwl_blink_compensation(struct iwl_priv *priv,
+				    u8 time, u16 compensation)
 {
-	return fls(0x000000FF & (u32)brightness);
-}
+	if (!compensation) {
+		IWL_ERR(priv, "undefined blink compensation: "
+			"use pre-defined blinking time\n");
+		return time;
+	}
 
-/* Send led command */
-static int iwl_send_led_cmd(struct iwl_priv *priv, struct iwl_led_cmd *led_cmd)
-{
-	struct iwl_host_cmd cmd = {
-		.id = REPLY_LEDS_CMD,
-		.len = sizeof(struct iwl_led_cmd),
-		.data = led_cmd,
-		.flags = CMD_ASYNC,
-		.callback = NULL,
-	};
-	u32 reg;
-
-	reg = iwl_read32(priv, CSR_LED_REG);
-	if (reg != (reg & CSR_LED_BSM_CTRL_MSK))
-		iwl_write32(priv, CSR_LED_REG, reg & CSR_LED_BSM_CTRL_MSK);
-
-	return iwl_send_cmd(priv, &cmd);
+	return (u8)((time * compensation) >> 6);
 }
 
 /* Set led pattern command */
-static int iwl_led_pattern(struct iwl_priv *priv, int led_id,
-			       unsigned int idx)
+static int iwl_led_pattern(struct iwl_priv *priv, unsigned int idx)
 {
 	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
+		.id = IWL_LED_LINK,
 		.interval = IWL_DEF_LED_INTRVL
 	};
 
 	BUG_ON(idx > IWL_MAX_BLINK_TBL);
 
-	led_cmd.on = blink_tbl[idx].on_time;
-	led_cmd.off = blink_tbl[idx].off_time;
+	IWL_DEBUG_LED(priv, "Led blink time compensation= %u\n",
+			priv->cfg->led_compensation);
+	led_cmd.on =
+		iwl_blink_compensation(priv, blink_tbl[idx].on_time,
+					priv->cfg->led_compensation);
+	led_cmd.off =
+		iwl_blink_compensation(priv, blink_tbl[idx].off_time,
+					priv->cfg->led_compensation);
 
-	return iwl_send_led_cmd(priv, &led_cmd);
+	return priv->cfg->ops->led->cmd(priv, &led_cmd);
 }
 
-/* Set led register off */
-static int iwl_led_on_reg(struct iwl_priv *priv, int led_id)
+int iwl_led_start(struct iwl_priv *priv)
 {
-	IWL_DEBUG_LED(priv, "led on %d\n", led_id);
-	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_ON);
-	return 0;
+	return priv->cfg->ops->led->on(priv);
 }
+EXPORT_SYMBOL(iwl_led_start);
 
-#if 0
-/* Set led on command */
-static int iwl_led_on(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.on = IWL_LED_SOLID,
-		.off = 0,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-
-/* Set led off command */
-int iwl_led_off(struct iwl_priv *priv, int led_id)
-{
-	struct iwl_led_cmd led_cmd = {
-		.id = led_id,
-		.on = 0,
-		.off = 0,
-		.interval = IWL_DEF_LED_INTRVL
-	};
-	IWL_DEBUG_LED(priv, "led off %d\n", led_id);
-	return iwl_send_led_cmd(priv, &led_cmd);
-}
-#endif
-
-
-/* Set led register off */
-static int iwl_led_off_reg(struct iwl_priv *priv, int led_id)
-{
-	IWL_DEBUG_LED(priv, "LED Reg off\n");
-	iwl_write32(priv, CSR_LED_REG, CSR_LED_REG_TRUN_OFF);
-	return 0;
-}
-
-/*
- * Set led register in case of disassociation according to rfkill state
- */
-static int iwl_led_associate(struct iwl_priv *priv, int led_id)
+int iwl_led_associate(struct iwl_priv *priv)
 {
 	IWL_DEBUG_LED(priv, "Associated\n");
-	priv->allow_blinking = 1;
-	return iwl_led_on_reg(priv, led_id);
+	if (led_mode == IWL_LED_BLINK)
+		priv->allow_blinking = 1;
+	priv->last_blink_time = jiffies;
+
+	return 0;
 }
-static int iwl_led_disassociate(struct iwl_priv *priv, int led_id)
+
+int iwl_led_disassociate(struct iwl_priv *priv)
 {
 	priv->allow_blinking = 0;
 
@@ -181,89 +143,6 @@
 }
 
 /*
- * brightness call back function for Tx/Rx LED
- */
-static int iwl_led_associated(struct iwl_priv *priv, int led_id)
-{
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status) ||
-	    !test_bit(STATUS_READY, &priv->status))
-		return 0;
-
-
-	/* start counting Tx/Rx bytes */
-	if (!priv->last_blink_time && priv->allow_blinking)
-		priv->last_blink_time = jiffies;
-	return 0;
-}
-
-/*
- * brightness call back for association and radio
- */
-static void iwl_led_brightness_set(struct led_classdev *led_cdev,
-				       enum led_brightness brightness)
-{
-	struct iwl_led *led = container_of(led_cdev, struct iwl_led, led_dev);
-	struct iwl_priv *priv = led->priv;
-
-	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
-		return;
-
-
-	IWL_DEBUG_LED(priv, "Led type = %s brightness = %d\n",
-			led_type_str[led->type], brightness);
-	switch (brightness) {
-	case LED_FULL:
-		if (led->led_on)
-			led->led_on(priv, IWL_LED_LINK);
-		break;
-	case LED_OFF:
-		if (led->led_off)
-			led->led_off(priv, IWL_LED_LINK);
-		break;
-	default:
-		if (led->led_pattern) {
-			int idx = iwl_brightness_to_idx(brightness);
-			led->led_pattern(priv, IWL_LED_LINK, idx);
-		}
-		break;
-	}
-}
-
-
-
-/*
- * Register led class with the system
- */
-static int iwl_leds_register_led(struct iwl_priv *priv, struct iwl_led *led,
-				   enum led_type type, u8 set_led,
-				   char *trigger)
-{
-	struct device *device = wiphy_dev(priv->hw->wiphy);
-	int ret;
-
-	led->led_dev.name = led->name;
-	led->led_dev.brightness_set = iwl_led_brightness_set;
-	led->led_dev.default_trigger = trigger;
-
-	led->priv = priv;
-	led->type = type;
-
-	ret = led_classdev_register(device, &led->led_dev);
-	if (ret) {
-		IWL_ERR(priv, "Error: failed to register led handler.\n");
-		return ret;
-	}
-
-	led->registered = 1;
-
-	if (set_led && led->led_on)
-		led->led_on(priv, IWL_LED_LINK);
-
-	return 0;
-}
-
-
-/*
  * calculate blink rate according to last second Tx/Rx activities
  */
 static int iwl_get_blink_rate(struct iwl_priv *priv)
@@ -288,7 +167,7 @@
 		i = IWL_MAX_BLINK_TBL;
 	else
 		for (i = 0; i < IWL_MAX_BLINK_TBL; i++)
-			if (tpt  > (blink_tbl[i].tpt * IWL_1MB_RATE))
+			if (tpt > (blink_tbl[i].tpt * IWL_1MB_RATE))
 				break;
 
 	IWL_DEBUG_LED(priv, "LED BLINK IDX=%d\n", i);
@@ -317,8 +196,7 @@
 		priv->last_blink_time = 0;
 		if (priv->last_blink_rate != IWL_SOLID_BLINK_IDX) {
 			priv->last_blink_rate = IWL_SOLID_BLINK_IDX;
-			iwl_led_pattern(priv, IWL_LED_LINK,
-					    IWL_SOLID_BLINK_IDX);
+			iwl_led_pattern(priv, IWL_SOLID_BLINK_IDX);
 		}
 		return;
 	}
@@ -331,111 +209,18 @@
 
 	/* call only if blink rate change */
 	if (blink_idx != priv->last_blink_rate)
-		iwl_led_pattern(priv, IWL_LED_LINK, blink_idx);
+		iwl_led_pattern(priv, blink_idx);
 
 	priv->last_blink_time = jiffies;
 	priv->last_blink_rate = blink_idx;
 }
+EXPORT_SYMBOL(iwl_leds_background);
 
-/* Register all led handler */
-int iwl_leds_register(struct iwl_priv *priv)
+void iwl_leds_init(struct iwl_priv *priv)
 {
-	char *trigger;
-	int ret;
-
 	priv->last_blink_rate = 0;
 	priv->led_tpt = 0;
 	priv->last_blink_time = 0;
 	priv->allow_blinking = 0;
-
-	trigger = ieee80211_get_radio_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RADIO].name,
-		 sizeof(priv->led[IWL_LED_TRG_RADIO].name), "iwl-%s::radio",
-		 wiphy_name(priv->hw->wiphy));
-
-	priv->led[IWL_LED_TRG_RADIO].led_on = iwl_led_on_reg;
-	priv->led[IWL_LED_TRG_RADIO].led_off = iwl_led_off_reg;
-	priv->led[IWL_LED_TRG_RADIO].led_pattern = NULL;
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RADIO],
-				   IWL_LED_TRG_RADIO, 1, trigger);
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_assoc_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_ASSOC].name,
-		 sizeof(priv->led[IWL_LED_TRG_ASSOC].name), "iwl-%s::assoc",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_ASSOC],
-				   IWL_LED_TRG_ASSOC, 0, trigger);
-
-	/* for assoc always turn led on */
-	priv->led[IWL_LED_TRG_ASSOC].led_on = iwl_led_associate;
-	priv->led[IWL_LED_TRG_ASSOC].led_off = iwl_led_disassociate;
-	priv->led[IWL_LED_TRG_ASSOC].led_pattern = NULL;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_rx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_RX].name,
-		 sizeof(priv->led[IWL_LED_TRG_RX].name), "iwl-%s::RX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_RX],
-				   IWL_LED_TRG_RX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_RX].led_on = iwl_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_off = iwl_led_associated;
-	priv->led[IWL_LED_TRG_RX].led_pattern = iwl_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	trigger = ieee80211_get_tx_led_name(priv->hw);
-	snprintf(priv->led[IWL_LED_TRG_TX].name,
-		 sizeof(priv->led[IWL_LED_TRG_TX].name), "iwl-%s::TX",
-		 wiphy_name(priv->hw->wiphy));
-
-	ret = iwl_leds_register_led(priv, &priv->led[IWL_LED_TRG_TX],
-				   IWL_LED_TRG_TX, 0, trigger);
-
-	priv->led[IWL_LED_TRG_TX].led_on = iwl_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_off = iwl_led_associated;
-	priv->led[IWL_LED_TRG_TX].led_pattern = iwl_led_pattern;
-
-	if (ret)
-		goto exit_fail;
-
-	return 0;
-
-exit_fail:
-	iwl_leds_unregister(priv);
-	return ret;
 }
-EXPORT_SYMBOL(iwl_leds_register);
-
-/* unregister led class */
-static void iwl_leds_unregister_led(struct iwl_led *led, u8 set_led)
-{
-	if (!led->registered)
-		return;
-
-	led_classdev_unregister(&led->led_dev);
-
-	if (set_led)
-		led->led_dev.brightness_set(&led->led_dev, LED_OFF);
-	led->registered = 0;
-}
-
-/* Unregister all led handlers */
-void iwl_leds_unregister(struct iwl_priv *priv)
-{
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_ASSOC], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_RX], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_TX], 0);
-	iwl_leds_unregister_led(&priv->led[IWL_LED_TRG_RADIO], 1);
-}
-EXPORT_SYMBOL(iwl_leds_unregister);
-
+EXPORT_SYMBOL(iwl_leds_init);
diff --git a/drivers/net/wireless/iwlwifi/iwl-led.h b/drivers/net/wireless/iwlwifi/iwl-led.h
index ef9b174..f47f053 100644
--- a/drivers/net/wireless/iwlwifi/iwl-led.h
+++ b/drivers/net/wireless/iwlwifi/iwl-led.h
@@ -30,9 +30,6 @@
 
 struct iwl_priv;
 
-#ifdef CONFIG_IWLWIFI_LEDS
-#include <linux/leds.h>
-
 #define IWL_LED_SOLID 11
 #define IWL_LED_NAME_LEN 31
 #define IWL_DEF_LED_INTRVL cpu_to_le32(1000)
@@ -47,38 +44,23 @@
 	IWL_LED_TRG_RADIO,
 	IWL_LED_TRG_MAX,
 };
-#endif
 
-#ifdef CONFIG_IWLWIFI_LEDS
-
-struct iwl_led {
-	struct iwl_priv *priv;
-	struct led_classdev led_dev;
-	char name[32];
-
-	int (*led_on) (struct iwl_priv *priv, int led_id);
-	int (*led_off) (struct iwl_priv *priv, int led_id);
-	int (*led_pattern) (struct iwl_priv *priv, int led_id, unsigned int idx);
-
-	enum led_type type;
-	unsigned int registered;
+/*
+ * LED mode
+ *    IWL_LED_BLINK:    adjust led blink rate based on blink table
+ *    IWL_LED_RF_STATE: turn LED on/off based on RF state
+ *			LED ON  = RF ON
+ *			LED OFF = RF OFF
+ */
+enum iwl_led_mode {
+	IWL_LED_BLINK,
+	IWL_LED_RF_STATE,
 };
 
-int iwl_leds_register(struct iwl_priv *priv);
-void iwl_leds_unregister(struct iwl_priv *priv);
+void iwl_leds_init(struct iwl_priv *priv);
 void iwl_leds_background(struct iwl_priv *priv);
+int iwl_led_start(struct iwl_priv *priv);
+int iwl_led_associate(struct iwl_priv *priv);
+int iwl_led_disassociate(struct iwl_priv *priv);
 
-#else
-static inline int iwl_leds_register(struct iwl_priv *priv)
-{
-	return 0;
-}
-static inline void iwl_leds_unregister(struct iwl_priv *priv)
-{
-}
-static inline void iwl_leds_background(struct iwl_priv *priv)
-{
-}
-
-#endif /* CONFIG_IWLWIFI_LEDS */
 #endif /* __iwl_leds_h__ */
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.c b/drivers/net/wireless/iwlwifi/iwl-power.c
index 60be976..9bce2c1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.c
+++ b/drivers/net/wireless/iwlwifi/iwl-power.c
@@ -66,7 +66,7 @@
 
 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
-	u8 no_dtim;
+	u8 no_dtim;	/* number of skip dtim */
 };
 
 #define IWL_DTIM_RANGE_0_MAX	2
@@ -83,8 +83,9 @@
 				     cpu_to_le32(X4)}
 /* default power management (not Tx power) table values */
 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
+/* DTIM 0 - 2 */
 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
-	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
+	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
@@ -93,15 +94,17 @@
 
 
 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
+/* DTIM 3 - 10 */
 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
-	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 7, 10, 10)}, 2}
+	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
 };
 
 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
+/* DTIM 11 - */
 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
@@ -115,13 +118,15 @@
 				 enum iwl_power_level lvl, int period)
 {
 	const struct iwl_power_vec_entry *table;
-	int max_sleep, i;
-	bool skip;
+	int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
+	int i;
+	u8 skip;
+	u32 slp_itrvl;
 
 	table = range_2;
-	if (period < IWL_DTIM_RANGE_1_MAX)
+	if (period <= IWL_DTIM_RANGE_1_MAX)
 		table = range_1;
-	if (period < IWL_DTIM_RANGE_0_MAX)
+	if (period <= IWL_DTIM_RANGE_0_MAX)
 		table = range_0;
 
 	BUG_ON(lvl < 0 || lvl >= IWL_POWER_NUM);
@@ -129,34 +134,60 @@
 	*cmd = table[lvl].cmd;
 
 	if (period == 0) {
-		skip = false;
+		skip = 0;
 		period = 1;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] =  1;
+
 	} else {
-		skip = !!table[lvl].no_dtim;
+		skip = table[lvl].no_dtim;
+		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
+			max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
+		max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
 	}
 
-	if (skip) {
-		__le32 slp_itrvl = cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1];
-		max_sleep = le32_to_cpu(slp_itrvl);
-		if (max_sleep == 0xFF)
-			max_sleep = period * (skip + 1);
-		else if (max_sleep > period)
-			max_sleep = (le32_to_cpu(slp_itrvl) / period) * period;
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	/* figure out the listen interval based on dtim period and skip */
+	if (slp_itrvl == 0xFF)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(period * (skip + 1));
+
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > period)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32((slp_itrvl / period) * period);
+
+	if (skip)
 		cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	} else {
-		max_sleep = period;
+	else
 		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;
-	}
 
-	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
-		if (le32_to_cpu(cmd->sleep_interval[i]) > max_sleep)
-			cmd->sleep_interval[i] = cpu_to_le32(max_sleep);
+	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
+	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
+		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
+			cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);
+
+	/* enforce max sleep interval */
+	for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
+		if (le32_to_cpu(cmd->sleep_interval[i]) >
+		    (max_sleep[i] * period))
+			cmd->sleep_interval[i] =
+				cpu_to_le32(max_sleep[i] * period);
+		if (i != (IWL_POWER_VEC_SIZE - 1)) {
+			if (le32_to_cpu(cmd->sleep_interval[i]) >
+			    le32_to_cpu(cmd->sleep_interval[i+1]))
+				cmd->sleep_interval[i] =
+					cmd->sleep_interval[i+1];
+		}
+	}
 
 	if (priv->power_data.pci_pm)
 		cmd->flags |= IWL_POWER_PCI_PM_MSK;
 	else
 		cmd->flags &= ~IWL_POWER_PCI_PM_MSK;
 
+	IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
+			skip, period);
 	IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
 }
 
@@ -165,26 +196,26 @@
  *=============================================================================
  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
  *-----------------------------------------------------------------------------
- *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
- *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
- *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
  *=============================================================================
  */
 static const struct iwl_tt_trans tt_range_0[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 104},
-	{IWL_TI_1, 105, CT_KILL_THRESHOLD},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_1, 105, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_1[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, 95},
-	{IWL_TI_2, 110, CT_KILL_THRESHOLD},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_2, 110, CT_KILL_THRESHOLD - 1},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_2[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_1, IWL_ABSOLUTE_ZERO, 100},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX},
-	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD + 1, IWL_ABSOLUTE_MAX}
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX},
+	{IWL_TI_CT_KILL, CT_KILL_THRESHOLD, IWL_ABSOLUTE_MAX}
 };
 static const struct iwl_tt_trans tt_range_3[IWL_TI_STATE_MAX - 1] = {
 	{IWL_TI_0, IWL_ABSOLUTE_ZERO, CT_KILL_EXIT_THRESHOLD},
@@ -294,6 +325,9 @@
 
 	if (priv->cfg->broken_powersave)
 		iwl_power_sleep_cam_cmd(priv, &cmd);
+	else if (priv->cfg->supports_idle &&
+		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
+		iwl_static_sleep_cmd(priv, &cmd, IWL_POWER_INDEX_5, 20);
 	else if (tt->state >= IWL_TI_1)
 		iwl_static_sleep_cmd(priv, &cmd, tt->tt_power_mode, dtimper);
 	else if (!enabled)
@@ -348,6 +382,23 @@
 }
 EXPORT_SYMBOL(iwl_ht_enabled);
 
+bool iwl_within_ct_kill_margin(struct iwl_priv *priv)
+{
+	s32 temp = priv->temperature; /* degrees CELSIUS except 4965 */
+	bool within_margin = false;
+
+	if ((priv->hw_rev & CSR_HW_REV_TYPE_MSK) == CSR_HW_REV_TYPE_4965)
+		temp = KELVIN_TO_CELSIUS(priv->temperature);
+
+	if (!priv->thermal_throttle.advanced_tt)
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD_LEGACY) ? true : false;
+	else
+		within_margin = ((temp + IWL_TT_CT_KILL_MARGIN) >=
+				CT_KILL_THRESHOLD) ? true : false;
+	return within_margin;
+}
+
 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
@@ -372,6 +423,7 @@
 }
 
 #define CT_KILL_EXIT_DURATION (5)	/* 5 seconds duration */
+#define CT_KILL_WAITING_DURATION (300)	/* 300ms duration */
 
 /*
  * toggle the bit to wake up uCode and check the temperature
@@ -409,6 +461,7 @@
 		/* Reschedule the ct_kill timer to occur in
 		 * CT_KILL_EXIT_DURATION seconds to ensure we get a
 		 * thermal update */
+		IWL_DEBUG_POWER(priv, "schedule ct_kill exit timer\n");
 		mod_timer(&priv->thermal_throttle.ct_kill_exit_tm, jiffies +
 			  CT_KILL_EXIT_DURATION * HZ);
 	}
@@ -432,6 +485,33 @@
 	}
 }
 
+static void iwl_tt_ready_for_ct_kill(unsigned long data)
+{
+	struct iwl_priv *priv = (struct iwl_priv *)data;
+	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
+
+	if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+		return;
+
+	/* temperature timer expired, ready to go into CT_KILL state */
+	if (tt->state != IWL_TI_CT_KILL) {
+		IWL_DEBUG_POWER(priv, "entering CT_KILL state when temperature timer expired\n");
+		tt->state = IWL_TI_CT_KILL;
+		set_bit(STATUS_CT_KILL, &priv->status);
+		iwl_perform_ct_kill_task(priv, true);
+	}
+}
+
+static void iwl_prepare_ct_kill_task(struct iwl_priv *priv)
+{
+	IWL_DEBUG_POWER(priv, "Prepare to enter IWL_TI_CT_KILL\n");
+	/* make request to retrieve statistics information */
+	iwl_send_statistics_request(priv, 0);
+	/* Reschedule the ct_kill wait timer */
+	mod_timer(&priv->thermal_throttle.ct_kill_waiting_tm,
+		 jiffies + msecs_to_jiffies(CT_KILL_WAITING_DURATION));
+}
+
 #define IWL_MINIMAL_POWER_THRESHOLD		(CT_KILL_THRESHOLD_LEGACY)
 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_2	(100)
 #define IWL_REDUCED_PERFORMANCE_THRESHOLD_1	(90)
@@ -445,7 +525,7 @@
  *	Throttle early enough to lower the power consumption before
  *	drastic steps are needed
  */
-static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp)
+static void iwl_legacy_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
 	enum iwl_tt_state old_state;
@@ -474,6 +554,8 @@
 #ifdef CONFIG_IWLWIFI_DEBUG
 	tt->tt_previous_temp = temp;
 #endif
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	if (tt->state != old_state) {
 		switch (tt->state) {
 		case IWL_TI_0:
@@ -494,17 +576,28 @@
 			break;
 		}
 		mutex_lock(&priv->mutex);
-		if (iwl_power_update_mode(priv, true)) {
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
 			/* TT state not updated
 			 * try again during next temperature read
 			 */
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
 			tt->state = old_state;
 			IWL_ERR(priv, "Cannot update power mode, "
 					"TT state not updated\n");
 		} else {
-			if (tt->state == IWL_TI_CT_KILL)
-				iwl_perform_ct_kill_task(priv, true);
-			else if (old_state == IWL_TI_CT_KILL &&
+			if (tt->state == IWL_TI_CT_KILL) {
+				if (force) {
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
+			} else if (old_state == IWL_TI_CT_KILL &&
 				 tt->state != IWL_TI_CT_KILL)
 				iwl_perform_ct_kill_task(priv, false);
 			IWL_DEBUG_POWER(priv, "Temperature state changed %u\n",
@@ -531,13 +624,13 @@
  *=============================================================================
  *                 Condition Nxt State  Condition Nxt State Condition Nxt State
  *-----------------------------------------------------------------------------
- *     IWL_TI_0     T >= 115   CT_KILL  115>T>=105   TI_1      N/A      N/A
- *     IWL_TI_1     T >= 115   CT_KILL  115>T>=110   TI_2     T<=95     TI_0
- *     IWL_TI_2     T >= 115   CT_KILL                        T<=100    TI_1
+ *     IWL_TI_0     T >= 114   CT_KILL  114>T>=105   TI_1      N/A      N/A
+ *     IWL_TI_1     T >= 114   CT_KILL  114>T>=110   TI_2     T<=95     TI_0
+ *     IWL_TI_2     T >= 114   CT_KILL                        T<=100    TI_1
  *    IWL_CT_KILL      N/A       N/A       N/A        N/A     T<=95     TI_0
  *=============================================================================
  */
-static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp)
+static void iwl_advance_tt_handler(struct iwl_priv *priv, s32 temp, bool force)
 {
 	struct iwl_tt_mgmt *tt = &priv->thermal_throttle;
 	int i;
@@ -582,6 +675,8 @@
 			break;
 		}
 	}
+	/* stop ct_kill_waiting_tm timer */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	if (changed) {
 		struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 
@@ -613,12 +708,17 @@
 			iwl_set_rxon_ht(priv, &priv->current_ht_config);
 		}
 		mutex_lock(&priv->mutex);
-		if (iwl_power_update_mode(priv, true)) {
+		if (old_state == IWL_TI_CT_KILL)
+			clear_bit(STATUS_CT_KILL, &priv->status);
+		if (tt->state != IWL_TI_CT_KILL &&
+		    iwl_power_update_mode(priv, true)) {
 			/* TT state not updated
 			 * try again during next temperature read
 			 */
 			IWL_ERR(priv, "Cannot update power mode, "
 					"TT state not updated\n");
+			if (old_state == IWL_TI_CT_KILL)
+				set_bit(STATUS_CT_KILL, &priv->status);
 			tt->state = old_state;
 		} else {
 			IWL_DEBUG_POWER(priv,
@@ -626,9 +726,15 @@
 					tt->state);
 			if (old_state != IWL_TI_CT_KILL &&
 			    tt->state == IWL_TI_CT_KILL) {
-				IWL_DEBUG_POWER(priv, "Enter IWL_TI_CT_KILL\n");
-				iwl_perform_ct_kill_task(priv, true);
-
+				if (force) {
+					IWL_DEBUG_POWER(priv,
+						"Enter IWL_TI_CT_KILL\n");
+					set_bit(STATUS_CT_KILL, &priv->status);
+					iwl_perform_ct_kill_task(priv, true);
+				} else {
+					iwl_prepare_ct_kill_task(priv);
+					tt->state = old_state;
+				}
 			} else if (old_state == IWL_TI_CT_KILL &&
 				  tt->state != IWL_TI_CT_KILL) {
 				IWL_DEBUG_POWER(priv, "Exit IWL_TI_CT_KILL\n");
@@ -665,10 +771,11 @@
 			      "- ucode going to sleep!\n");
 		if (!priv->thermal_throttle.advanced_tt)
 			iwl_legacy_tt_handler(priv,
-					      IWL_MINIMAL_POWER_THRESHOLD);
+					      IWL_MINIMAL_POWER_THRESHOLD,
+					      true);
 		else
 			iwl_advance_tt_handler(priv,
-					       CT_KILL_THRESHOLD + 1);
+					       CT_KILL_THRESHOLD + 1, true);
 	}
 }
 
@@ -695,11 +802,18 @@
 		IWL_ERR(priv,
 			"Device temperature below critical"
 			"- ucode awake!\n");
+		/*
+		 * exit from CT_KILL state
+		 * reset the current temperature reading
+		 */
+		priv->temperature = 0;
 		if (!priv->thermal_throttle.advanced_tt)
 			iwl_legacy_tt_handler(priv,
-					IWL_REDUCED_PERFORMANCE_THRESHOLD_2);
+					      IWL_REDUCED_PERFORMANCE_THRESHOLD_2,
+					      true);
 		else
-			iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD);
+			iwl_advance_tt_handler(priv, CT_KILL_EXIT_THRESHOLD,
+					       true);
 	}
 }
 
@@ -735,9 +849,9 @@
 		temp = KELVIN_TO_CELSIUS(priv->temperature);
 
 	if (!priv->thermal_throttle.advanced_tt)
-		iwl_legacy_tt_handler(priv, temp);
+		iwl_legacy_tt_handler(priv, temp, false);
 	else
-		iwl_advance_tt_handler(priv, temp);
+		iwl_advance_tt_handler(priv, temp, false);
 }
 
 void iwl_tt_handler(struct iwl_priv *priv)
@@ -768,16 +882,18 @@
 	tt->state = IWL_TI_0;
 	init_timer(&priv->thermal_throttle.ct_kill_exit_tm);
 	priv->thermal_throttle.ct_kill_exit_tm.data = (unsigned long)priv;
-	priv->thermal_throttle.ct_kill_exit_tm.function = iwl_tt_check_exit_ct_kill;
-
+	priv->thermal_throttle.ct_kill_exit_tm.function =
+		iwl_tt_check_exit_ct_kill;
+	init_timer(&priv->thermal_throttle.ct_kill_waiting_tm);
+	priv->thermal_throttle.ct_kill_waiting_tm.data = (unsigned long)priv;
+	priv->thermal_throttle.ct_kill_waiting_tm.function =
+		iwl_tt_ready_for_ct_kill;
 	/* setup deferred ct kill work */
 	INIT_WORK(&priv->tt_work, iwl_bg_tt_work);
 	INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter);
 	INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit);
 
-	switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) {
-	case CSR_HW_REV_TYPE_6x00:
-	case CSR_HW_REV_TYPE_6x50:
+	if (priv->cfg->adv_thermal_throttle) {
 		IWL_DEBUG_POWER(priv, "Advanced Thermal Throttling\n");
 		tt->restriction = kzalloc(sizeof(struct iwl_tt_restriction) *
 					 IWL_TI_STATE_MAX, GFP_KERNEL);
@@ -810,11 +926,9 @@
 				&restriction_range[0], size);
 			priv->thermal_throttle.advanced_tt = true;
 		}
-		break;
-	default:
+	} else {
 		IWL_DEBUG_POWER(priv, "Legacy Thermal Throttling\n");
 		priv->thermal_throttle.advanced_tt = false;
-		break;
 	}
 }
 EXPORT_SYMBOL(iwl_tt_initialize);
@@ -826,6 +940,8 @@
 
 	/* stop ct_kill_exit_tm timer if activated */
 	del_timer_sync(&priv->thermal_throttle.ct_kill_exit_tm);
+	/* stop ct_kill_waiting_tm timer if activated */
+	del_timer_sync(&priv->thermal_throttle.ct_kill_waiting_tm);
 	cancel_work_sync(&priv->tt_work);
 	cancel_work_sync(&priv->ct_enter);
 	cancel_work_sync(&priv->ct_exit);
diff --git a/drivers/net/wireless/iwlwifi/iwl-power.h b/drivers/net/wireless/iwlwifi/iwl-power.h
index df6f6a4..310c32e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-power.h
+++ b/drivers/net/wireless/iwlwifi/iwl-power.h
@@ -33,6 +33,7 @@
 #define IWL_ABSOLUTE_ZERO		0
 #define IWL_ABSOLUTE_MAX		0xFFFFFFFF
 #define IWL_TT_INCREASE_MARGIN	5
+#define IWL_TT_CT_KILL_MARGIN	3
 
 enum iwl_antenna_ok {
 	IWL_ANT_OK_NONE,
@@ -110,6 +111,7 @@
 	struct iwl_tt_restriction *restriction;
 	struct iwl_tt_trans *transaction;
 	struct timer_list ct_kill_exit_tm;
+	struct timer_list ct_kill_waiting_tm;
 };
 
 enum iwl_power_level {
@@ -129,6 +131,7 @@
 
 int iwl_power_update_mode(struct iwl_priv *priv, bool force);
 bool iwl_ht_enabled(struct iwl_priv *priv);
+bool iwl_within_ct_kill_margin(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_tx_ant_restriction(struct iwl_priv *priv);
 enum iwl_antenna_ok iwl_rx_ant_restriction(struct iwl_priv *priv);
 void iwl_tt_enter_ct_kill(struct iwl_priv *priv);
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 493626b..e5339c9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -200,7 +200,7 @@
 		list_del(element);
 
 		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->aligned_dma_addr);
+		rxq->bd[rxq->write] = iwl_dma_addr2rbd_ptr(priv, rxb->page_dma);
 		rxq->queue[rxq->write] = rxb;
 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 		rxq->free_count--;
@@ -239,8 +239,9 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
-	struct sk_buff *skb;
+	struct page *page;
 	unsigned long flags;
+	gfp_t gfp_mask = priority;
 
 	while (1) {
 		spin_lock_irqsave(&rxq->lock, flags);
@@ -251,30 +252,35 @@
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		if (rxq->free_count > RX_LOW_WATERMARK)
-			priority |= __GFP_NOWARN;
-		/* Alloc a new receive buffer */
-		skb = alloc_skb(priv->hw_params.rx_buf_size + 256,
-						priority);
+			gfp_mask |= __GFP_NOWARN;
 
-		if (!skb) {
+		if (priv->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
+		/* Alloc a new receive buffer */
+		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+		if (!page) {
 			if (net_ratelimit())
-				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
+				IWL_DEBUG_INFO(priv, "alloc_pages failed, "
+					       "order: %d\n",
+					       priv->hw_params.rx_page_order);
+
 			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
 			    net_ratelimit())
-				IWL_CRIT(priv, "Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+				IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
 					 priority == GFP_ATOMIC ?  "GFP_ATOMIC" : "GFP_KERNEL",
 					 rxq->free_count);
 			/* We don't reschedule replenish work here -- we will
 			 * call the restock method and if it still needs
 			 * more buffers it will schedule replenish */
-			break;
+			return;
 		}
 
 		spin_lock_irqsave(&rxq->lock, flags);
 
 		if (list_empty(&rxq->rx_used)) {
 			spin_unlock_irqrestore(&rxq->lock, flags);
-			dev_kfree_skb_any(skb);
+			__free_pages(page, priv->hw_params.rx_page_order);
 			return;
 		}
 		element = rxq->rx_used.next;
@@ -283,24 +289,21 @@
 
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
-		rxb->skb = skb;
-		/* Get physical address of RB/SKB */
-		rxb->real_dma_addr = pci_map_single(
-					priv->pci_dev,
-					rxb->skb->data,
-					priv->hw_params.rx_buf_size + 256,
-					PCI_DMA_FROMDEVICE);
+		rxb->page = page;
+		/* Get physical address of the RB */
+		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
 		/* dma address must be no more than 36 bits */
-		BUG_ON(rxb->real_dma_addr & ~DMA_BIT_MASK(36));
+		BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
 		/* and also 256 byte aligned! */
-		rxb->aligned_dma_addr = ALIGN(rxb->real_dma_addr, 256);
-		skb_reserve(rxb->skb, rxb->aligned_dma_addr - rxb->real_dma_addr);
+		BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
 
 		spin_lock_irqsave(&rxq->lock, flags);
 
 		list_add_tail(&rxb->list, &rxq->rx_free);
 		rxq->free_count++;
-		priv->alloc_rxb_skb++;
+		priv->alloc_rxb_page++;
 
 		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
@@ -336,12 +339,14 @@
 {
 	int i;
 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size + 256,
-					 PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(rxq->pool[i].skb);
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
+			priv->alloc_rxb_page--;
 		}
 	}
 
@@ -405,14 +410,14 @@
 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 		/* In the reset function, these buffers may have been allocated
 		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size + 256,
-					 PCI_DMA_FROMDEVICE);
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb(rxq->pool[i].skb);
-			rxq->pool[i].skb = NULL;
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_page--;
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
 		}
 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 	}
@@ -491,7 +496,7 @@
 				struct iwl_rx_mem_buffer *rxb)
 
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_missed_beacon_notif *missed_beacon;
 
 	missed_beacon = &pkt->u.missed_beacon;
@@ -548,13 +553,51 @@
 			priv->last_rx_noise);
 }
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+/*
+ *  based on the assumption of all statistics counter are in DWORD
+ *  FIXME: This function is for debugging, do not deal with
+ *  the case of counters roll-over.
+ */
+static void iwl_accumulative_statistics(struct iwl_priv *priv,
+					__le32 *stats)
+{
+	int i;
+	__le32 *prev_stats;
+	u32 *accum_stats;
+
+	prev_stats = (__le32 *)&priv->statistics;
+	accum_stats = (u32 *)&priv->accum_statistics;
+
+	for (i = sizeof(__le32); i < sizeof(struct iwl_notif_statistics);
+	     i += sizeof(__le32), stats++, prev_stats++, accum_stats++)
+		if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats))
+			*accum_stats += (le32_to_cpu(*stats) -
+				le32_to_cpu(*prev_stats));
+
+	/* reset accumulative statistics for "no-counter" type statistics */
+	priv->accum_statistics.general.temperature =
+		priv->statistics.general.temperature;
+	priv->accum_statistics.general.temperature_m =
+		priv->statistics.general.temperature_m;
+	priv->accum_statistics.general.ttl_timestamp =
+		priv->statistics.general.ttl_timestamp;
+	priv->accum_statistics.tx.tx_power.ant_a =
+		priv->statistics.tx.tx_power.ant_a;
+	priv->accum_statistics.tx.tx_power.ant_b =
+		priv->statistics.tx.tx_power.ant_b;
+	priv->accum_statistics.tx.tx_power.ant_c =
+		priv->statistics.tx.tx_power.ant_c;
+}
+#endif
+
 #define REG_RECALIB_PERIOD (60)
 
 void iwl_rx_statistics(struct iwl_priv *priv,
 			      struct iwl_rx_mem_buffer *rxb)
 {
 	int change;
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 
 	IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n",
 		     (int)sizeof(priv->statistics),
@@ -566,6 +609,9 @@
 		    STATISTICS_REPLY_FLG_HT40_MODE_MSK) !=
 		   (pkt->u.stats.flag & STATISTICS_REPLY_FLG_HT40_MODE_MSK)));
 
+#ifdef CONFIG_IWLWIFI_DEBUG
+	iwl_accumulative_statistics(priv, (__le32 *)&pkt->u.stats);
+#endif
 	memcpy(&priv->statistics, &pkt->u.stats, sizeof(priv->statistics));
 
 	set_bit(STATUS_STATISTICS, &priv->status);
@@ -582,9 +628,6 @@
 		iwl_rx_calc_noise(priv);
 		queue_work(priv->workqueue, &priv->run_time_calib_work);
 	}
-
-	iwl_leds_background(priv);
-
 	if (priv->cfg->ops->lib->temp_ops.temperature && change)
 		priv->cfg->ops->lib->temp_ops.temperature(priv);
 }
@@ -878,6 +921,10 @@
 					struct iwl_rx_mem_buffer *rxb,
 					struct ieee80211_rx_status *stats)
 {
+	struct sk_buff *skb;
+	int ret = 0;
+	__le16 fc = hdr->frame_control;
+
 	/* We only process data packets if the interface is open */
 	if (unlikely(!priv->is_open)) {
 		IWL_DEBUG_DROP_LIMIT(priv,
@@ -890,15 +937,43 @@
 	    iwl_set_decrypted_flag(priv, hdr, ampdu_status, stats))
 		return;
 
-	/* Resize SKB from mac header to end of packet */
-	skb_reserve(rxb->skb, (void *)hdr - (void *)rxb->skb->data);
-	skb_put(rxb->skb, len);
+	skb = alloc_skb(IWL_LINK_HDR_MAX, GFP_ATOMIC);
+	if (!skb) {
+		IWL_ERR(priv, "alloc_skb failed\n");
+		return;
+	}
 
-	iwl_update_stats(priv, false, hdr->frame_control, len);
-	memcpy(IEEE80211_SKB_RXCB(rxb->skb), stats, sizeof(*stats));
-	ieee80211_rx_irqsafe(priv->hw, rxb->skb);
-	priv->alloc_rxb_skb--;
-	rxb->skb = NULL;
+	skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb), len);
+
+	/* mac80211 currently doesn't support paged SKB. Convert it to
+	 * linear SKB for management frame and data frame requires
+	 * software decryption or software defragementation. */
+	if (ieee80211_is_mgmt(fc) ||
+	    ieee80211_has_protected(fc) ||
+	    ieee80211_has_morefrags(fc) ||
+	    le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG)
+		ret = skb_linearize(skb);
+	else
+		ret = __pskb_pull_tail(skb, min_t(u16, IWL_LINK_HDR_MAX, len)) ?
+			 0 : -ENOMEM;
+
+	if (ret) {
+		kfree_skb(skb);
+		goto out;
+	}
+
+	/*
+	 * XXX: We cannot touch the page and its virtual memory (hdr) after
+	 * here. It might have already been freed by the above skb change.
+	 */
+
+	iwl_update_stats(priv, false, fc, len);
+	memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+	ieee80211_rx(priv->hw, skb);
+ out:
+	priv->alloc_rxb_page--;
+	rxb->page = NULL;
 }
 
 /* This is necessary only for a number of statistics, see the caller. */
@@ -926,7 +1001,7 @@
 {
 	struct ieee80211_hdr *header;
 	struct ieee80211_rx_status rx_status;
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_rx_phy_res *phy_res;
 	__le32 rx_pkt_status;
 	struct iwl4965_rx_mpdu_res_start *amsdu;
@@ -1087,7 +1162,7 @@
 void iwl_rx_reply_rx_phy(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	priv->last_phy_res[0] = 1;
 	memcpy(&priv->last_phy_res[1], &(pkt->u.raw[0]),
 	       sizeof(struct iwl_rx_phy_res));
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 4f3a108..4fca65a 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -27,7 +27,6 @@
  *****************************************************************************/
 #include <linux/types.h>
 #include <linux/etherdevice.h>
-#include <net/lib80211.h>
 #include <net/mac80211.h>
 
 #include "iwl-eeprom.h"
@@ -112,7 +111,7 @@
 static int iwl_send_scan_abort(struct iwl_priv *priv)
 {
 	int ret = 0;
-	struct iwl_rx_packet *res;
+	struct iwl_rx_packet *pkt;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_SCAN_ABORT_CMD,
 		.flags = CMD_WANT_SKB,
@@ -132,21 +131,21 @@
 		return ret;
 	}
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->u.status != CAN_ABORT_STATUS) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->u.status != CAN_ABORT_STATUS) {
 		/* The scan abort will return 1 for success or
 		 * 2 for "failure".  A failure condition can be
 		 * due to simply not being in an active scan which
 		 * can occur if we send the scan abort before we
 		 * the microcode has notified us that a scan is
 		 * completed. */
-		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", res->u.status);
+		IWL_DEBUG_INFO(priv, "SCAN_ABORT returned %d.\n", pkt->u.status);
 		clear_bit(STATUS_SCAN_ABORTING, &priv->status);
 		clear_bit(STATUS_SCAN_HW, &priv->status);
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
@@ -156,7 +155,7 @@
 			      struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanreq_notification *notif =
 	    (struct iwl_scanreq_notification *)pkt->u.raw;
 
@@ -168,7 +167,7 @@
 static void iwl_rx_scan_start_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanstart_notification *notif =
 	    (struct iwl_scanstart_notification *)pkt->u.raw;
 	priv->scan_start_tsf = le32_to_cpu(notif->tsf_low);
@@ -187,7 +186,7 @@
 				      struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scanresults_notification *notif =
 	    (struct iwl_scanresults_notification *)pkt->u.raw;
 
@@ -214,7 +213,7 @@
 				       struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_scancomplete_notification *scan_notif = (void *)pkt->u.raw;
 
 	IWL_DEBUG_SCAN(priv, "Scan complete: %d channels (TSF 0x%08X:%08X) - %d\n",
diff --git a/drivers/net/wireless/iwlwifi/iwl-spectrum.c b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
index 022bcf1..1ea5cd3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-spectrum.c
+++ b/drivers/net/wireless/iwlwifi/iwl-spectrum.c
@@ -177,7 +177,7 @@
 static void iwl_rx_spectrum_measure_notif(struct iwl_priv *priv,
 					  struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_spectrum_notification *report = &(pkt->u.spectrum_notif);
 
 	if (!report->state) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index c6633fe..dc74c16 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -99,32 +99,25 @@
 
 static void iwl_add_sta_callback(struct iwl_priv *priv,
 				 struct iwl_device_cmd *cmd,
-				 struct sk_buff *skb)
+				 struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *res = NULL;
 	struct iwl_addsta_cmd *addsta =
 		(struct iwl_addsta_cmd *)cmd->cmd.payload;
 	u8 sta_id = addsta->sta.sta_id;
 
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in REPLY_ADD_STA.\n");
-		return;
-	}
-
-	res = (struct iwl_rx_packet *)skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		return;
 	}
 
-	switch (res->u.add_sta.status) {
+	switch (pkt->u.add_sta.status) {
 	case ADD_STA_SUCCESS_MSK:
 		iwl_sta_ucode_activate(priv, sta_id);
 		 /* fall through */
 	default:
 		IWL_DEBUG_HC(priv, "Received REPLY_ADD_STA:(0x%08X)\n",
-			     res->u.add_sta.status);
+			     pkt->u.add_sta.status);
 		break;
 	}
 }
@@ -132,7 +125,7 @@
 int iwl_send_add_sta(struct iwl_priv *priv,
 		     struct iwl_addsta_cmd *sta, u8 flags)
 {
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt = NULL;
 	int ret = 0;
 	u8 data[sizeof(*sta)];
 	struct iwl_host_cmd cmd = {
@@ -152,15 +145,15 @@
 	if (ret || (flags & CMD_ASYNC))
 		return ret;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_ADD_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		ret = -EIO;
 	}
 
 	if (ret == 0) {
-		switch (res->u.add_sta.status) {
+		switch (pkt->u.add_sta.status) {
 		case ADD_STA_SUCCESS_MSK:
 			iwl_sta_ucode_activate(priv, sta->sta.sta_id);
 			IWL_DEBUG_INFO(priv, "REPLY_ADD_STA PASSED\n");
@@ -172,8 +165,8 @@
 		}
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
@@ -324,26 +317,19 @@
 
 static void iwl_remove_sta_callback(struct iwl_priv *priv,
 				    struct iwl_device_cmd *cmd,
-				    struct sk_buff *skb)
+				    struct iwl_rx_packet *pkt)
 {
-	struct iwl_rx_packet *res = NULL;
 	struct iwl_rem_sta_cmd *rm_sta =
-		 (struct iwl_rem_sta_cmd *)cmd->cmd.payload;
+			(struct iwl_rem_sta_cmd *)cmd->cmd.payload;
 	const char *addr = rm_sta->addr;
 
-	if (!skb) {
-		IWL_ERR(priv, "Error: Response NULL in REPLY_REMOVE_STA.\n");
-		return;
-	}
-
-	res = (struct iwl_rx_packet *)skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
-		res->hdr.flags);
+		pkt->hdr.flags);
 		return;
 	}
 
-	switch (res->u.rem_sta.status) {
+	switch (pkt->u.rem_sta.status) {
 	case REM_STA_SUCCESS_MSK:
 		iwl_sta_ucode_deactivate(priv, addr);
 		break;
@@ -356,7 +342,7 @@
 static int iwl_send_remove_station(struct iwl_priv *priv, const u8 *addr,
 				   u8 flags)
 {
-	struct iwl_rx_packet *res = NULL;
+	struct iwl_rx_packet *pkt;
 	int ret;
 
 	struct iwl_rem_sta_cmd rm_sta_cmd;
@@ -381,15 +367,15 @@
 	if (ret || (flags & CMD_ASYNC))
 		return ret;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_REMOVE_STA (0x%08X)\n",
-			  res->hdr.flags);
+			  pkt->hdr.flags);
 		ret = -EIO;
 	}
 
 	if (!ret) {
-		switch (res->u.rem_sta.status) {
+		switch (pkt->u.rem_sta.status) {
 		case REM_STA_SUCCESS_MSK:
 			iwl_sta_ucode_deactivate(priv, addr);
 			IWL_DEBUG_ASSOC(priv, "REPLY_REMOVE_STA PASSED\n");
@@ -401,8 +387,8 @@
 		}
 	}
 
-	priv->alloc_rxb_skb--;
-	dev_kfree_skb_any(cmd.reply_skb);
+	priv->alloc_rxb_page--;
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return ret;
 }
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index c189075..8ae4c9b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -131,7 +131,7 @@
 	struct iwl_tx_queue *txq = &priv->txq[txq_id];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int i, len;
+	int i;
 
 	if (q->n_bd == 0)
 		return;
@@ -141,8 +141,6 @@
 	     q->read_ptr = iwl_queue_inc_wrap(q->read_ptr, q->n_bd))
 		priv->cfg->ops->lib->txq_free_tfd(priv, txq);
 
-	len = sizeof(struct iwl_device_cmd) * q->n_window;
-
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i < TFD_TX_CMD_SLOTS; i++)
 		kfree(txq->cmd[i]);
@@ -180,14 +178,11 @@
 	struct iwl_tx_queue *txq = &priv->txq[IWL_CMD_QUEUE_NUM];
 	struct iwl_queue *q = &txq->q;
 	struct pci_dev *dev = priv->pci_dev;
-	int i, len;
+	int i;
 
 	if (q->n_bd == 0)
 		return;
 
-	len = sizeof(struct iwl_device_cmd) * q->n_window;
-	len += IWL_MAX_SCAN_SIZE;
-
 	/* De-alloc array of command/tx buffers */
 	for (i = 0; i <= TFD_CMD_SLOTS; i++)
 		kfree(txq->cmd[i]);
@@ -405,15 +400,19 @@
 	int txq_id;
 
 	/* Tx queues */
-	for (txq_id = 0; txq_id < priv->hw_params.max_txq_num; txq_id++)
-		if (txq_id == IWL_CMD_QUEUE_NUM)
-			iwl_cmd_queue_free(priv);
-		else
-			iwl_tx_queue_free(priv, txq_id);
-
+	if (priv->txq)
+		for (txq_id = 0; txq_id < priv->hw_params.max_txq_num;
+		     txq_id++)
+			if (txq_id == IWL_CMD_QUEUE_NUM)
+				iwl_cmd_queue_free(priv);
+			else
+				iwl_tx_queue_free(priv, txq_id);
 	iwl_free_dma_ptr(priv, &priv->kw);
 
 	iwl_free_dma_ptr(priv, &priv->scd_bc_tbls);
+
+	/* free tx queue structure */
+	iwl_free_txq_mem(priv);
 }
 EXPORT_SYMBOL(iwl_hw_txq_ctx_free);
 
@@ -445,6 +444,12 @@
 		IWL_ERR(priv, "Keep Warm allocation failed\n");
 		goto error_kw;
 	}
+
+	/* allocate tx queue structure */
+	ret = iwl_alloc_txq_mem(priv);
+	if (ret)
+		goto error;
+
 	spin_lock_irqsave(&priv->lock, flags);
 
 	/* Turn off all Tx DMA fifos */
@@ -581,9 +586,7 @@
 	u8 rate_plcp;
 
 	/* Set retry limit on DATA packets and Probe Responses*/
-	if (priv->data_retry_limit != -1)
-		data_retry_limit = priv->data_retry_limit;
-	else if (ieee80211_is_probe_resp(fc))
+	if (ieee80211_is_probe_resp(fc))
 		data_retry_limit = 3;
 	else
 		data_retry_limit = IWL_DEFAULT_TX_RETRY;
@@ -709,7 +712,7 @@
 	dma_addr_t phys_addr;
 	dma_addr_t txcmd_phys;
 	dma_addr_t scratch_phys;
-	u16 len, len_org;
+	u16 len, len_org, firstlen, secondlen;
 	u16 seq_number = 0;
 	__le16 fc;
 	u8 hdr_len;
@@ -842,7 +845,7 @@
 		sizeof(struct iwl_cmd_header) + hdr_len;
 
 	len_org = len;
-	len = (len + 3) & ~3;
+	firstlen = len = (len + 3) & ~3;
 
 	if (len_org != len)
 		len_org = 1;
@@ -876,7 +879,7 @@
 
 	/* Set up TFD's 2nd entry to point directly to remainder of skb,
 	 * if any (802.11 null frames have no payload). */
-	len = skb->len - hdr_len;
+	secondlen = len = skb->len - hdr_len;
 	if (len) {
 		phys_addr = pci_map_single(priv->pci_dev, skb->data + hdr_len,
 					   len, PCI_DMA_TODEVICE);
@@ -910,6 +913,12 @@
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
 				       len, PCI_DMA_BIDIRECTIONAL);
 
+	trace_iwlwifi_dev_tx(priv,
+			     &((struct iwl_tfd *)txq->tfds)[txq->q.write_ptr],
+			     sizeof(struct iwl_tfd),
+			     &out_cmd->hdr, firstlen,
+			     skb->data + hdr_len, secondlen);
+
 	/* Tell device the write index *just past* this latest filled TFD */
 	q->write_ptr = iwl_queue_inc_wrap(q->write_ptr, q->n_bd);
 	ret = iwl_txq_update_write_ptr(priv, txq);
@@ -969,13 +978,19 @@
 	BUG_ON((fix_size > TFD_MAX_PAYLOAD_SIZE) &&
 	       !(cmd->flags & CMD_SIZE_HUGE));
 
-	if (iwl_is_rfkill(priv)) {
-		IWL_DEBUG_INFO(priv, "Not sending command - RF KILL\n");
+	if (iwl_is_rfkill(priv) || iwl_is_ctkill(priv)) {
+		IWL_DEBUG_INFO(priv, "Not sending command - RF/CT KILL\n");
 		return -EIO;
 	}
 
 	if (iwl_queue_space(q) < ((cmd->flags & CMD_ASYNC) ? 2 : 1)) {
 		IWL_ERR(priv, "No space for Tx\n");
+		if (iwl_within_ct_kill_margin(priv))
+			iwl_tt_enter_ct_kill(priv);
+		else {
+			IWL_ERR(priv, "Restarting adapter due to queue full\n");
+			queue_work(priv->workqueue, &priv->restart);
+		}
 		return -ENOSPC;
 	}
 
@@ -1038,6 +1053,8 @@
 	pci_unmap_addr_set(out_meta, mapping, phys_addr);
 	pci_unmap_len_set(out_meta, len, fix_size);
 
+	trace_iwlwifi_dev_hcmd(priv, &out_cmd->hdr, fix_size, cmd->flags);
+
 	priv->cfg->ops->lib->txq_attach_buf_to_tfd(priv, txq,
 						   phys_addr, fix_size, 1,
 						   U32_PAD(cmd->len));
@@ -1131,7 +1148,7 @@
  */
 void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u16 sequence = le16_to_cpu(pkt->hdr.sequence);
 	int txq_id = SEQ_TO_QUEUE(sequence);
 	int index = SEQ_TO_INDEX(sequence);
@@ -1158,10 +1175,10 @@
 
 	/* Input error checking is done when commands are added to queue. */
 	if (meta->flags & CMD_WANT_SKB) {
-		meta->source->reply_skb = rxb->skb;
-		rxb->skb = NULL;
+		meta->source->reply_page = (unsigned long)rxb_addr(rxb);
+		rxb->page = NULL;
 	} else if (meta->callback)
-		meta->callback(priv, cmd, rxb->skb);
+		meta->callback(priv, cmd, pkt);
 
 	iwl_hcmd_queue_reclaim(priv, txq_id, index, cmd_index);
 
@@ -1400,7 +1417,7 @@
 
 	info = IEEE80211_SKB_CB(priv->txq[scd_flow].txb[agg->start_idx].skb[0]);
 	memset(&info->status, 0, sizeof(info->status));
-	info->flags = IEEE80211_TX_STAT_ACK;
+	info->flags |= IEEE80211_TX_STAT_ACK;
 	info->flags |= IEEE80211_TX_STAT_AMPDU;
 	info->status.ampdu_ack_map = successes;
 	info->status.ampdu_ack_len = agg->frame_count;
@@ -1420,7 +1437,7 @@
 void iwl_rx_reply_compressed_ba(struct iwl_priv *priv,
 					   struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
 	struct iwl_tx_queue *txq = NULL;
 	struct iwl_ht_agg *agg;
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 837a193..bfd7f49 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -41,7 +41,6 @@
 #include <linux/if_arp.h>
 
 #include <net/ieee80211_radiotap.h>
-#include <net/lib80211.h>
 #include <net/mac80211.h>
 
 #include <asm/div64.h>
@@ -89,7 +88,6 @@
 
  /* module parameters */
 struct iwl_mod_params iwl3945_mod_params = {
-	.num_of_queues = IWL39_NUM_QUEUES, /* Not used */
 	.sw_crypto = 1,
 	.restart_fw = 1,
 	/* the rest are 0 by default */
@@ -367,13 +365,13 @@
 				      struct sk_buff *skb_frag,
 				      int sta_id)
 {
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
 	struct iwl_hw_key *keyinfo = &priv->stations[sta_id].keyinfo;
 
 	switch (keyinfo->alg) {
 	case ALG_CCMP:
-		tx->sec_ctl = TX_CMD_SEC_CCM;
-		memcpy(tx->key, keyinfo->key, keyinfo->keylen);
+		tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+		memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
 		IWL_DEBUG_TX(priv, "tx_cmd with AES hwcrypto\n");
 		break;
 
@@ -381,13 +379,13 @@
 		break;
 
 	case ALG_WEP:
-		tx->sec_ctl = TX_CMD_SEC_WEP |
+		tx_cmd->sec_ctl = TX_CMD_SEC_WEP |
 		    (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
 
 		if (keyinfo->keylen == 13)
-			tx->sec_ctl |= TX_CMD_SEC_KEY128;
+			tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
 
-		memcpy(&tx->key[3], keyinfo->key, keyinfo->keylen);
+		memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
 
 		IWL_DEBUG_TX(priv, "Configuring packet for WEP encryption "
 			     "with key %d\n", info->control.hw_key->hw_key_idx);
@@ -407,12 +405,11 @@
 				  struct ieee80211_tx_info *info,
 				  struct ieee80211_hdr *hdr, u8 std_id)
 {
-	struct iwl3945_tx_cmd *tx = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
-	__le32 tx_flags = tx->tx_flags;
+	struct iwl3945_tx_cmd *tx_cmd = (struct iwl3945_tx_cmd *)cmd->cmd.payload;
+	__le32 tx_flags = tx_cmd->tx_flags;
 	__le16 fc = hdr->frame_control;
-	u8 rc_flags = info->control.rates[0].flags;
 
-	tx->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+	tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
 	if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
 		tx_flags |= TX_CMD_FLG_ACK_MSK;
 		if (ieee80211_is_mgmt(fc))
@@ -425,25 +422,19 @@
 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 	}
 
-	tx->sta_id = std_id;
+	tx_cmd->sta_id = std_id;
 	if (ieee80211_has_morefrags(fc))
 		tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
 
 	if (ieee80211_is_data_qos(fc)) {
 		u8 *qc = ieee80211_get_qos_ctl(hdr);
-		tx->tid_tspec = qc[0] & 0xf;
+		tx_cmd->tid_tspec = qc[0] & 0xf;
 		tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
 	} else {
 		tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
 	}
 
-	if (rc_flags & IEEE80211_TX_RC_USE_RTS_CTS) {
-		tx_flags |= TX_CMD_FLG_RTS_MSK;
-		tx_flags &= ~TX_CMD_FLG_CTS_MSK;
-	} else if (rc_flags & IEEE80211_TX_RC_USE_CTS_PROTECT) {
-		tx_flags &= ~TX_CMD_FLG_RTS_MSK;
-		tx_flags |= TX_CMD_FLG_CTS_MSK;
-	}
+	priv->cfg->ops->utils->rts_tx_cmd_flag(info, &tx_flags);
 
 	if ((tx_flags & TX_CMD_FLG_RTS_MSK) || (tx_flags & TX_CMD_FLG_CTS_MSK))
 		tx_flags |= TX_CMD_FLG_FULL_TXOP_PROT_MSK;
@@ -451,19 +442,16 @@
 	tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
 	if (ieee80211_is_mgmt(fc)) {
 		if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
-			tx->timeout.pm_frame_timeout = cpu_to_le16(3);
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
 		else
-			tx->timeout.pm_frame_timeout = cpu_to_le16(2);
+			tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
 	} else {
-		tx->timeout.pm_frame_timeout = 0;
-#ifdef CONFIG_IWLWIFI_LEDS
-		priv->rxtxpackets += le16_to_cpu(cmd->cmd.tx.len);
-#endif
+		tx_cmd->timeout.pm_frame_timeout = 0;
 	}
 
-	tx->driver_txop = 0;
-	tx->tx_flags = tx_flags;
-	tx->next_frame_len = 0;
+	tx_cmd->driver_txop = 0;
+	tx_cmd->tx_flags = tx_flags;
+	tx_cmd->next_frame_len = 0;
 }
 
 /*
@@ -473,7 +461,7 @@
 {
 	struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
-	struct iwl3945_tx_cmd *tx;
+	struct iwl3945_tx_cmd *tx_cmd;
 	struct iwl_tx_queue *txq = NULL;
 	struct iwl_queue *q = NULL;
 	struct iwl_device_cmd *out_cmd;
@@ -572,9 +560,9 @@
 	/* Init first empty entry in queue's array of Tx/cmd buffers */
 	out_cmd = txq->cmd[idx];
 	out_meta = &txq->meta[idx];
-	tx = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
+	tx_cmd = (struct iwl3945_tx_cmd *)out_cmd->cmd.payload;
 	memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
-	memset(tx, 0, sizeof(*tx));
+	memset(tx_cmd, 0, sizeof(*tx_cmd));
 
 	/*
 	 * Set up the Tx-command (not MAC!) header.
@@ -587,7 +575,7 @@
 				INDEX_TO_SEQ(q->write_ptr)));
 
 	/* Copy MAC header from skb into command buffer */
-	memcpy(tx->hdr, hdr, hdr_len);
+	memcpy(tx_cmd->hdr, hdr, hdr_len);
 
 
 	if (info->control.hw_key)
@@ -601,12 +589,12 @@
 
 	/* Total # bytes to be transmitted */
 	len = (u16)skb->len;
-	tx->len = cpu_to_le16(len);
+	tx_cmd->len = cpu_to_le16(len);
 
 	iwl_dbg_log_tx_data_frame(priv, len, hdr);
 	iwl_update_stats(priv, true, fc, len);
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
-	tx->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+	tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
 
 	if (!ieee80211_has_morefrags(hdr->frame_control)) {
 		txq->need_update = 1;
@@ -619,9 +607,9 @@
 
 	IWL_DEBUG_TX(priv, "sequence nr = 0X%x \n",
 		     le16_to_cpu(out_cmd->hdr.sequence));
-	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx->tx_flags));
-	iwl_print_hex_dump(priv, IWL_DL_TX, tx, sizeof(*tx));
-	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx->hdr,
+	IWL_DEBUG_TX(priv, "tx_flags = 0X%x \n", le32_to_cpu(tx_cmd->tx_flags));
+	iwl_print_hex_dump(priv, IWL_DL_TX, tx_cmd, sizeof(*tx_cmd));
+	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr,
 			   ieee80211_hdrlen(fc));
 
 	/*
@@ -757,7 +745,7 @@
 			       u8 type)
 {
 	struct iwl_spectrum_cmd spectrum;
-	struct iwl_rx_packet *res;
+	struct iwl_rx_packet *pkt;
 	struct iwl_host_cmd cmd = {
 		.id = REPLY_SPECTRUM_MEASUREMENT_CMD,
 		.data = (void *)&spectrum,
@@ -802,18 +790,18 @@
 	if (rc)
 		return rc;
 
-	res = (struct iwl_rx_packet *)cmd.reply_skb->data;
-	if (res->hdr.flags & IWL_CMD_FAILED_MSK) {
+	pkt = (struct iwl_rx_packet *)cmd.reply_page;
+	if (pkt->hdr.flags & IWL_CMD_FAILED_MSK) {
 		IWL_ERR(priv, "Bad return from REPLY_RX_ON_ASSOC command\n");
 		rc = -EIO;
 	}
 
-	spectrum_resp_status = le16_to_cpu(res->u.spectrum.status);
+	spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
 	switch (spectrum_resp_status) {
 	case 0:		/* Command will be handled */
-		if (res->u.spectrum.id != 0xff) {
+		if (pkt->u.spectrum.id != 0xff) {
 			IWL_DEBUG_INFO(priv, "Replaced existing measurement: %d\n",
-						res->u.spectrum.id);
+						pkt->u.spectrum.id);
 			priv->measurement_status &= ~MEASUREMENT_READY;
 		}
 		priv->measurement_status |= MEASUREMENT_ACTIVE;
@@ -825,7 +813,7 @@
 		break;
 	}
 
-	dev_kfree_skb_any(cmd.reply_skb);
+	free_pages(cmd.reply_page, priv->hw_params.rx_page_order);
 
 	return rc;
 }
@@ -834,7 +822,7 @@
 static void iwl3945_rx_reply_alive(struct iwl_priv *priv,
 			       struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl_alive_resp *palive;
 	struct delayed_work *pwork;
 
@@ -871,7 +859,7 @@
 				 struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 #endif
 
 	IWL_DEBUG_RX(priv, "Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
@@ -907,7 +895,7 @@
 				struct iwl_rx_mem_buffer *rxb)
 {
 #ifdef CONFIG_IWLWIFI_DEBUG
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	struct iwl3945_beacon_notif *beacon = &(pkt->u.beacon_status);
 	u8 rate = beacon->beacon_notify_hdr.rate;
 
@@ -930,7 +918,7 @@
 static void iwl3945_rx_card_state_notif(struct iwl_priv *priv,
 				    struct iwl_rx_mem_buffer *rxb)
 {
-	struct iwl_rx_packet *pkt = (void *)rxb->skb->data;
+	struct iwl_rx_packet *pkt = rxb_addr(rxb);
 	u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
 	unsigned long status = priv->status;
 
@@ -1094,7 +1082,7 @@
 		list_del(element);
 
 		/* Point to Rx buffer via next RBD in circular buffer */
-		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->real_dma_addr);
+		rxq->bd[rxq->write] = iwl3945_dma_addr2rbd_ptr(priv, rxb->page_dma);
 		rxq->queue[rxq->write] = rxb;
 		rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
 		rxq->free_count--;
@@ -1134,8 +1122,9 @@
 	struct iwl_rx_queue *rxq = &priv->rxq;
 	struct list_head *element;
 	struct iwl_rx_mem_buffer *rxb;
-	struct sk_buff *skb;
+	struct page *page;
 	unsigned long flags;
+	gfp_t gfp_mask = priority;
 
 	while (1) {
 		spin_lock_irqsave(&rxq->lock, flags);
@@ -1147,10 +1136,14 @@
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
 		if (rxq->free_count > RX_LOW_WATERMARK)
-			priority |= __GFP_NOWARN;
+			gfp_mask |= __GFP_NOWARN;
+
+		if (priv->hw_params.rx_page_order > 0)
+			gfp_mask |= __GFP_COMP;
+
 		/* Alloc a new receive buffer */
-		skb = alloc_skb(priv->hw_params.rx_buf_size, priority);
-		if (!skb) {
+		page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+		if (!page) {
 			if (net_ratelimit())
 				IWL_DEBUG_INFO(priv, "Failed to allocate SKB buffer.\n");
 			if ((rxq->free_count <= RX_LOW_WATERMARK) &&
@@ -1167,7 +1160,7 @@
 		spin_lock_irqsave(&rxq->lock, flags);
 		if (list_empty(&rxq->rx_used)) {
 			spin_unlock_irqrestore(&rxq->lock, flags);
-			dev_kfree_skb_any(skb);
+			__free_pages(page, priv->hw_params.rx_page_order);
 			return;
 		}
 		element = rxq->rx_used.next;
@@ -1175,26 +1168,18 @@
 		list_del(element);
 		spin_unlock_irqrestore(&rxq->lock, flags);
 
-		rxb->skb = skb;
-
-		/* If radiotap head is required, reserve some headroom here.
-		 * The physical head count is a variable rx_stats->phy_count.
-		 * We reserve 4 bytes here. Plus these extra bytes, the
-		 * headroom of the physical head should be enough for the
-		 * radiotap head that iwl3945 supported. See iwl3945_rt.
-		 */
-		skb_reserve(rxb->skb, 4);
-
+		rxb->page = page;
 		/* Get physical address of RB/SKB */
-		rxb->real_dma_addr = pci_map_single(priv->pci_dev,
-						rxb->skb->data,
-						priv->hw_params.rx_buf_size,
-						PCI_DMA_FROMDEVICE);
+		rxb->page_dma = pci_map_page(priv->pci_dev, page, 0,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
 
 		spin_lock_irqsave(&rxq->lock, flags);
+
 		list_add_tail(&rxb->list, &rxq->rx_free);
-		priv->alloc_rxb_skb++;
 		rxq->free_count++;
+		priv->alloc_rxb_page++;
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
 	}
 }
@@ -1210,14 +1195,14 @@
 	for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
 		/* In the reset function, these buffers may have been allocated
 		 * to an SKB, so we need to unmap and free potential storage */
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size,
-					 PCI_DMA_FROMDEVICE);
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb(rxq->pool[i].skb);
-			rxq->pool[i].skb = NULL;
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			priv->alloc_rxb_page--;
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
 		}
 		list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
 	}
@@ -1225,8 +1210,8 @@
 	/* Set us so that we have processed and used all buffers, but have
 	 * not restocked the Rx queue with fresh buffers */
 	rxq->read = rxq->write = 0;
-	rxq->free_count = 0;
 	rxq->write_actual = 0;
+	rxq->free_count = 0;
 	spin_unlock_irqrestore(&rxq->lock, flags);
 }
 
@@ -1259,12 +1244,14 @@
 {
 	int i;
 	for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
-		if (rxq->pool[i].skb != NULL) {
-			pci_unmap_single(priv->pci_dev,
-					 rxq->pool[i].real_dma_addr,
-					 priv->hw_params.rx_buf_size,
-					 PCI_DMA_FROMDEVICE);
-			dev_kfree_skb(rxq->pool[i].skb);
+		if (rxq->pool[i].page != NULL) {
+			pci_unmap_page(priv->pci_dev, rxq->pool[i].page_dma,
+				PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			__free_pages(rxq->pool[i].page,
+				     priv->hw_params.rx_page_order);
+			rxq->pool[i].page = NULL;
+			priv->alloc_rxb_page--;
 		}
 	}
 
@@ -1380,7 +1367,7 @@
 	i = rxq->read;
 
 	/* calculate total frames need to be restock after handling RX */
-	total_empty = r - priv->rxq.write_actual;
+	total_empty = r - rxq->write_actual;
 	if (total_empty < 0)
 		total_empty += RX_QUEUE_SIZE;
 
@@ -1400,10 +1387,13 @@
 
 		rxq->queue[i] = NULL;
 
-		pci_unmap_single(priv->pci_dev, rxb->real_dma_addr,
-				priv->hw_params.rx_buf_size,
-				PCI_DMA_FROMDEVICE);
-		pkt = (struct iwl_rx_packet *)rxb->skb->data;
+		pci_unmap_page(priv->pci_dev, rxb->page_dma,
+			       PAGE_SIZE << priv->hw_params.rx_page_order,
+			       PCI_DMA_FROMDEVICE);
+		pkt = rxb_addr(rxb);
+
+		trace_iwlwifi_dev_rx(priv, pkt,
+			le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
 
 		/* Reclaim a command buffer only if this packet is a response
 		 *   to a (driver-originated) command.
@@ -1421,44 +1411,55 @@
 		if (priv->rx_handlers[pkt->hdr.cmd]) {
 			IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r, i,
 				get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 			priv->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+			priv->rx_handlers[pkt->hdr.cmd] (priv, rxb);
 		} else {
 			/* No handling needed */
-			IWL_DEBUG_RX(priv, "r %d i %d No handler needed for %s, 0x%02x\n",
+			IWL_DEBUG_RX(priv,
+				"r %d i %d No handler needed for %s, 0x%02x\n",
 				r, i, get_cmd_string(pkt->hdr.cmd),
 				pkt->hdr.cmd);
 		}
 
+		/*
+		 * XXX: After here, we should always check rxb->page
+		 * against NULL before touching it or its virtual
+		 * memory (pkt). Because some rx_handler might have
+		 * already taken or freed the pages.
+		 */
+
 		if (reclaim) {
-			/* Invoke any callbacks, transfer the skb to caller, and
-			 * fire off the (possibly) blocking iwl_send_cmd()
+			/* Invoke any callbacks, transfer the buffer to caller,
+			 * and fire off the (possibly) blocking iwl_send_cmd()
 			 * as we reclaim the driver command queue */
-			if (rxb && rxb->skb)
+			if (rxb->page)
 				iwl_tx_cmd_complete(priv, rxb);
 			else
 				IWL_WARN(priv, "Claim null rxb?\n");
 		}
 
-		/* For now we just don't re-use anything.  We can tweak this
-		 * later to try and re-use notification packets and SKBs that
-		 * fail to Rx correctly */
-		if (rxb->skb != NULL) {
-			priv->alloc_rxb_skb--;
-			dev_kfree_skb_any(rxb->skb);
-			rxb->skb = NULL;
-		}
-
+		/* Reuse the page if possible. For notification packets and
+		 * SKBs that fail to Rx correctly, add them back into the
+		 * rx_free list for reuse later. */
 		spin_lock_irqsave(&rxq->lock, flags);
-		list_add_tail(&rxb->list, &priv->rxq.rx_used);
+		if (rxb->page != NULL) {
+			rxb->page_dma = pci_map_page(priv->pci_dev, rxb->page,
+				0, PAGE_SIZE << priv->hw_params.rx_page_order,
+				PCI_DMA_FROMDEVICE);
+			list_add_tail(&rxb->list, &rxq->rx_free);
+			rxq->free_count++;
+		} else
+			list_add_tail(&rxb->list, &rxq->rx_used);
+
 		spin_unlock_irqrestore(&rxq->lock, flags);
+
 		i = (i + 1) & RX_QUEUE_MASK;
 		/* If there are a lot of unused frames,
 		 * restock the Rx queue so ucode won't assert. */
 		if (fill_rx) {
 			count++;
 			if (count >= 8) {
-				priv->rxq.read = i;
+				rxq->read = i;
 				iwl3945_rx_replenish_now(priv);
 				count = 0;
 			}
@@ -1466,7 +1467,7 @@
 	}
 
 	/* Backtrack one entry */
-	priv->rxq.read = i;
+	rxq->read = i;
 	if (fill_rx)
 		iwl3945_rx_replenish_now(priv);
 	else
@@ -1550,8 +1551,9 @@
 			"%-13s (#%d) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
 			desc_lookup(desc), desc, time, blink1, blink2,
 			ilink1, ilink2, data1);
+		trace_iwlwifi_dev_ucode_error(priv, desc, time, data1, 0,
+					0, blink1, blink2, ilink1, ilink2);
 	}
-
 }
 
 #define EVENT_START_OFFSET  (6 * sizeof(u32))
@@ -1591,10 +1593,12 @@
 		if (mode == 0) {
 			/* data, ev */
 			IWL_ERR(priv, "0x%08x\t%04u\n", time, ev);
+			trace_iwlwifi_dev_ucode_event(priv, 0, time, ev);
 		} else {
 			data = iwl_read_targ_mem(priv, ptr);
 			ptr += sizeof(u32);
 			IWL_ERR(priv, "%010u\t0x%08x\t%04u\n", time, data, ev);
+			trace_iwlwifi_dev_ucode_event(priv, time, data, ev);
 		}
 	}
 }
@@ -1684,6 +1688,8 @@
 	}
 #endif
 
+	spin_unlock_irqrestore(&priv->lock, flags);
+
 	/* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
 	 * atomic, make sure that inta covers all the interrupts that
 	 * we've discovered, even if FH interrupt came in just after
@@ -1705,8 +1711,6 @@
 
 		handled |= CSR_INT_BIT_HW_ERR;
 
-		spin_unlock_irqrestore(&priv->lock, flags);
-
 		return;
 	}
 
@@ -1798,7 +1802,6 @@
 			"flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
 	}
 #endif
-	spin_unlock_irqrestore(&priv->lock, flags);
 }
 
 static int iwl3945_get_channels_for_scan(struct iwl_priv *priv,
@@ -2478,7 +2481,7 @@
 
 	iwl3945_reg_txpower_periodic(priv);
 
-	iwl3945_led_register(priv);
+	iwl_leds_init(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
 	set_bit(STATUS_READY, &priv->status);
@@ -2516,7 +2519,6 @@
 	if (!exit_pending)
 		set_bit(STATUS_EXIT_PENDING, &priv->status);
 
-	iwl3945_led_unregister(priv);
 	iwl_clear_stations_table(priv);
 
 	/* Unblock any waiting calls */
@@ -2562,11 +2564,6 @@
 			test_bit(STATUS_EXIT_PENDING, &priv->status) <<
 				STATUS_EXIT_PENDING;
 
-	priv->cfg->ops->lib->apm_ops.reset(priv);
-	spin_lock_irqsave(&priv->lock, flags);
-	iwl_clear_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	iwl3945_hw_txq_ctx_stop(priv);
 	iwl3945_hw_rxq_stop(priv);
 
@@ -2575,10 +2572,8 @@
 
 	udelay(5);
 
-	if (exit_pending)
-		priv->cfg->ops->lib->apm_ops.stop(priv);
-	else
-		priv->cfg->ops->lib->apm_ops.reset(priv);
+	/* Stop the device, and put it in low power state */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
 
  exit:
 	memset(&priv->card_alive, 0, sizeof(struct iwl_alive_resp));
@@ -2723,19 +2718,34 @@
 	mutex_unlock(&priv->mutex);
 }
 
+/*
+ * 3945 cannot interrupt driver when hardware rf kill switch toggles;
+ * driver must poll CSR_GP_CNTRL_REG register for change.  This register
+ * *is* readable even when device has been SW_RESET into low power mode
+ * (e.g. during RF KILL).
+ */
 static void iwl3945_rfkill_poll(struct work_struct *data)
 {
 	struct iwl_priv *priv =
 	    container_of(data, struct iwl_priv, rfkill_poll.work);
+	bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &priv->status);
+	bool new_rfkill = !(iwl_read32(priv, CSR_GP_CNTRL)
+			& CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
 
-	if (iwl_read32(priv, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
-		clear_bit(STATUS_RF_KILL_HW, &priv->status);
-	else
-		set_bit(STATUS_RF_KILL_HW, &priv->status);
+	if (new_rfkill != old_rfkill) {
+		if (new_rfkill)
+			set_bit(STATUS_RF_KILL_HW, &priv->status);
+		else
+			clear_bit(STATUS_RF_KILL_HW, &priv->status);
 
-	wiphy_rfkill_set_hw_state(priv->hw->wiphy,
-			test_bit(STATUS_RF_KILL_HW, &priv->status));
+		wiphy_rfkill_set_hw_state(priv->hw->wiphy, new_rfkill);
 
+		IWL_DEBUG_RF_KILL(priv, "RF_KILL bit toggled to %s.\n",
+				new_rfkill ? "disable radio" : "enable radio");
+	}
+
+	/* Keep this running, even if radio now enabled.  This will be
+	 * cancelled in mac_start() if system decides to start again */
 	queue_delayed_work(priv->workqueue, &priv->rfkill_poll,
 			   round_jiffies_relative(2 * HZ));
 
@@ -3151,6 +3161,8 @@
 	 * no need to poll the killswitch state anymore */
 	cancel_delayed_work(&priv->rfkill_poll);
 
+	iwl_led_start(priv);
+
 	priv->is_open = 1;
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 	return 0;
@@ -3794,7 +3806,6 @@
 	/* Clear the driver's (not device's) station table */
 	iwl_clear_stations_table(priv);
 
-	priv->data_retry_limit = -1;
 	priv->ieee_channels = NULL;
 	priv->ieee_rates = NULL;
 	priv->band = IEEE80211_BAND_2GHZ;
@@ -4053,6 +4064,7 @@
 			     &priv->bands[IEEE80211_BAND_2GHZ].channels[5]);
 	iwl3945_setup_deferred_work(priv);
 	iwl3945_setup_rx_handlers(priv);
+	iwl_power_initialize(priv);
 
 	/*********************************
 	 * 8. Setup and Register mac80211
@@ -4123,6 +4135,15 @@
 		iwl3945_down(priv);
 	}
 
+	/*
+	 * Make sure device is reset to low power before unloading driver.
+	 * This may be redundant with iwl_down(), but there are paths to
+	 * run iwl_down() without calling apm_ops.stop(), and there are
+	 * paths to avoid running iwl_down() at all before leaving driver.
+	 * This (inexpensive) call *makes sure* device is reset.
+	 */
+	priv->cfg->ops->lib->apm_ops.stop(priv);
+
 	/* make sure we flush any pending irq or
 	 * tasklet for the driver
 	 */
@@ -4225,18 +4246,19 @@
 
 MODULE_FIRMWARE(IWL3945_MODULE_FIRMWARE(IWL3945_UCODE_API_MAX));
 
-module_param_named(antenna, iwl3945_mod_params.antenna, int, 0444);
+module_param_named(antenna, iwl3945_mod_params.antenna, int, S_IRUGO);
 MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, 0444);
+module_param_named(swcrypto, iwl3945_mod_params.sw_crypto, int, S_IRUGO);
 MODULE_PARM_DESC(swcrypto,
 		 "using software crypto (default 1 [software])\n");
 #ifdef CONFIG_IWLWIFI_DEBUG
-module_param_named(debug, iwl_debug_level, uint, 0644);
+module_param_named(debug, iwl_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");
 #endif
-module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan, int, 0444);
+module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
+		   int, S_IRUGO);
 MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
-module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, 0444);
+module_param_named(fw_restart3945, iwl3945_mod_params.restart_fw, int, S_IRUGO);
 MODULE_PARM_DESC(fw_restart3945, "restart firmware in case of error");
 
 module_exit(iwl3945_exit);
diff --git a/drivers/net/wireless/iwmc3200wifi/Kconfig b/drivers/net/wireless/iwmc3200wifi/Kconfig
index c25a043..9606b31 100644
--- a/drivers/net/wireless/iwmc3200wifi/Kconfig
+++ b/drivers/net/wireless/iwmc3200wifi/Kconfig
@@ -3,6 +3,7 @@
 	depends on MMC && WLAN_80211 && EXPERIMENTAL
 	depends on CFG80211
 	select FW_LOADER
+	select IWMC3200TOP
 	help
 	  The Intel Wireless Multicomm 3200 hardware is a combo
 	  card with GPS, Bluetooth, WiMax and 802.11 radios. It
diff --git a/drivers/net/wireless/iwmc3200wifi/cfg80211.c b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
index a56a2b0..af72cc7 100644
--- a/drivers/net/wireless/iwmc3200wifi/cfg80211.c
+++ b/drivers/net/wireless/iwmc3200wifi/cfg80211.c
@@ -404,39 +404,21 @@
 {
 	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
 	struct ieee80211_channel *chan = params->channel;
-	struct cfg80211_bss *bss;
 
 	if (!test_bit(IWM_STATUS_READY, &iwm->status))
 		return -EIO;
 
-	/* UMAC doesn't support creating IBSS network with specified bssid.
-	 * This should be removed after we have join only mode supported. */
+	/* UMAC doesn't support creating or joining an IBSS network
+	 * with specified bssid. */
 	if (params->bssid)
 		return -EOPNOTSUPP;
 
-	bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
-				params->ssid, params->ssid_len);
-	if (!bss) {
-		iwm_scan_one_ssid(iwm, params->ssid, params->ssid_len);
-		schedule_timeout_interruptible(2 * HZ);
-		bss = cfg80211_get_ibss(iwm_to_wiphy(iwm), NULL,
-					params->ssid, params->ssid_len);
-	}
-	/* IBSS join only mode is not supported by UMAC ATM */
-	if (bss) {
-		cfg80211_put_bss(bss);
-		return -EOPNOTSUPP;
-	}
-
 	iwm->channel = ieee80211_frequency_to_channel(chan->center_freq);
 	iwm->umac_profile->ibss.band = chan->band;
 	iwm->umac_profile->ibss.channel = iwm->channel;
 	iwm->umac_profile->ssid.ssid_len = params->ssid_len;
 	memcpy(iwm->umac_profile->ssid.ssid, params->ssid, params->ssid_len);
 
-	if (params->bssid)
-		memcpy(&iwm->umac_profile->bssid[0], params->bssid, ETH_ALEN);
-
 	return iwm_send_mlme_profile(iwm);
 }
 
@@ -489,12 +471,12 @@
 		return 0;
 	}
 
+	if (wpa_version & NL80211_WPA_VERSION_1)
+		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WPA_ON_MSK;
+
 	if (wpa_version & NL80211_WPA_VERSION_2)
 		iwm->umac_profile->sec.flags = UMAC_SEC_FLG_RSNA_ON_MSK;
 
-	if (wpa_version & NL80211_WPA_VERSION_1)
-		iwm->umac_profile->sec.flags |= UMAC_SEC_FLG_WPA_ON_MSK;
-
 	return 0;
 }
 
@@ -645,6 +627,13 @@
 		iwm->default_key = sme->key_idx;
 	}
 
+	/* WPA and open AUTH type from wpa_s means WPS (a.k.a. WSC) */
+	if ((iwm->umac_profile->sec.flags &
+	     (UMAC_SEC_FLG_WPA_ON_MSK | UMAC_SEC_FLG_RSNA_ON_MSK)) &&
+	    iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_OPEN) {
+			iwm->umac_profile->sec.flags = UMAC_SEC_FLG_WSC_ON_MSK;
+	}
+
 	ret = iwm_send_mlme_profile(iwm);
 
 	if (iwm->umac_profile->sec.auth_type != UMAC_AUTH_TYPE_LEGACY_PSK ||
@@ -681,9 +670,19 @@
 static int iwm_cfg80211_set_txpower(struct wiphy *wiphy,
 				    enum tx_power_setting type, int dbm)
 {
+	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
+	int ret;
+
 	switch (type) {
 	case TX_POWER_AUTOMATIC:
 		return 0;
+	case TX_POWER_FIXED:
+		ret = iwm_umac_set_config_fix(iwm, UMAC_PARAM_TBL_CFG_FIX,
+					      CFG_TX_PWR_LIMIT_USR, dbm * 2);
+		if (ret < 0)
+			return ret;
+
+		return iwm_tx_power_trigger(iwm);
 	default:
 		return -EOPNOTSUPP;
 	}
@@ -695,7 +694,7 @@
 {
 	struct iwm_priv *iwm = wiphy_to_iwm(wiphy);
 
-	*dbm = iwm->txpower;
+	*dbm = iwm->txpower >> 1;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.c b/drivers/net/wireless/iwmc3200wifi/commands.c
index 23b52fa..cad511a 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.c
+++ b/drivers/net/wireless/iwmc3200wifi/commands.c
@@ -76,6 +76,11 @@
 	int ret;
 	u8 oid = hdr->oid;
 
+	if (!test_bit(IWM_STATUS_READY, &iwm->status)) {
+		IWM_ERR(iwm, "Interface is not ready yet");
+		return -EAGAIN;
+	}
+
 	umac_cmd.id = UMAC_CMD_OPCODE_WIFI_IF_WRAPPER;
 	umac_cmd.resp = resp;
 
@@ -274,6 +279,17 @@
 	return ret;
 }
 
+int iwm_send_ct_kill_cfg(struct iwm_priv *iwm, u8 entry, u8 exit)
+{
+	struct iwm_ct_kill_cfg_cmd cmd;
+
+	cmd.entry_threshold = entry;
+	cmd.exit_threshold = exit;
+
+	return iwm_send_lmac_ptrough_cmd(iwm, REPLY_CT_KILL_CONFIG_CMD, &cmd,
+					 sizeof(struct iwm_ct_kill_cfg_cmd), 0);
+}
+
 int iwm_send_umac_reset(struct iwm_priv *iwm, __le32 reset_flags, bool resp)
 {
 	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
@@ -777,11 +793,24 @@
 		return ret;
 
 	ret = wait_event_interruptible_timeout(iwm->mlme_queue,
-				(iwm->umac_profile_active == 0), 2 * HZ);
+				(iwm->umac_profile_active == 0), 5 * HZ);
 
 	return ret ? 0 : -EBUSY;
 }
 
+int iwm_tx_power_trigger(struct iwm_priv *iwm)
+{
+	struct iwm_umac_pwr_trigger pwr_trigger;
+
+	pwr_trigger.hdr.oid = UMAC_WIFI_IF_CMD_TX_PWR_TRIGGER;
+	pwr_trigger.hdr.buf_size =
+		cpu_to_le16(sizeof(struct iwm_umac_pwr_trigger) -
+			    sizeof(struct iwm_umac_wifi_if));
+
+
+	return iwm_send_wifi_if_cmd(iwm, &pwr_trigger, sizeof(pwr_trigger), 1);
+}
+
 int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags)
 {
 	struct iwm_udma_wifi_cmd udma_cmd = UDMA_UMAC_INIT;
diff --git a/drivers/net/wireless/iwmc3200wifi/commands.h b/drivers/net/wireless/iwmc3200wifi/commands.h
index e24d5b6..b36be2b 100644
--- a/drivers/net/wireless/iwmc3200wifi/commands.h
+++ b/drivers/net/wireless/iwmc3200wifi/commands.h
@@ -102,7 +102,6 @@
 	CFG_SCAN_NUM_PASSIVE_CHAN_PER_PARTIAL_SCAN,
 	CFG_TLC_SUPPORTED_TX_HT_RATES,
 	CFG_TLC_SUPPORTED_TX_RATES,
-	CFG_TLC_VALID_ANTENNA,
 	CFG_TLC_SPATIAL_STREAM_SUPPORTED,
 	CFG_TLC_RETRY_PER_RATE,
 	CFG_TLC_RETRY_PER_HT_RATE,
@@ -136,6 +135,10 @@
 	CFG_TLC_RENEW_ADDBA_DELAY,
 	CFG_TLC_NUM_OF_MULTISEC_TO_COUN_LOAD,
 	CFG_TLC_IS_STABLE_IN_HT,
+	CFG_TLC_SR_SIC_1ST_FAIL,
+	CFG_TLC_SR_SIC_1ST_PASS,
+	CFG_TLC_SR_SIC_TOTAL_FAIL,
+	CFG_TLC_SR_SIC_TOTAL_PASS,
 	CFG_RLC_CHAIN_CTRL,
 	CFG_TRK_TABLE_OP_MODE,
 	CFG_TRK_TABLE_RSSI_THRESHOLD,
@@ -147,6 +150,58 @@
 	CFG_MLME_DBG_NOTIF_BLOCK,
 	CFG_BT_OFF_BECONS_INTERVALS,
 	CFG_BT_FRAG_DURATION,
+	CFG_ACTIVE_CHAINS,
+	CFG_CALIB_CTRL,
+	CFG_CAPABILITY_SUPPORTED_HT_RATES,
+	CFG_HT_MAC_PARAM_INFO,
+	CFG_MIMO_PS_MODE,
+	CFG_HT_DEFAULT_CAPABILIES_INFO,
+	CFG_LED_SC_RESOLUTION_FACTOR,
+	CFG_PTAM_ENERGY_CCK_DET_DEFAULT,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_DEFAULT,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_DEFAULT,
+	CFG_PTAM_ENERGY_CCK_DET_MIN_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_MIN_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MIN_VAL,
+	CFG_PTAM_ENERGY_CCK_DET_MAX_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_MAX_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MAX_VAL,
+	CFG_PTAM_ENERGY_CCK_DET_STEP_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR40_4_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR32_4_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_MRC_STEP_VAL,
+	CFG_PTAM_CORR32_1_TH_ADD_MIN_STEP_VAL,
+	CFG_PTAM_LINK_SENS_FA_OFDM_MAX,
+	CFG_PTAM_LINK_SENS_FA_OFDM_MIN,
+	CFG_PTAM_LINK_SENS_FA_CCK_MAX,
+	CFG_PTAM_LINK_SENS_FA_CCK_MIN,
+	CFG_PTAM_LINK_SENS_NRG_DIFF,
+	CFG_PTAM_LINK_SENS_NRG_MARGIN,
+	CFG_PTAM_LINK_SENS_MAX_NUMBER_OF_TIMES_IN_CCK_NO_FA,
+	CFG_PTAM_LINK_SENS_AUTO_CORR_MAX_TH_CCK,
+	CFG_AGG_MGG_TID_LOAD_ADDBA_THRESHOLD,
+	CFG_AGG_MGG_TID_LOAD_DELBA_THRESHOLD,
+	CFG_AGG_MGG_ADDBA_BUF_SIZE,
+	CFG_AGG_MGG_ADDBA_INACTIVE_TIMEOUT,
+	CFG_AGG_MGG_ADDBA_DEBUG_FLAGS,
+	CFG_SCAN_PERIODIC_RSSI_HIGH_THRESHOLD,
+	CFG_SCAN_PERIODIC_COEF_RSSI_HIGH,
+	CFG_11D_ENABLED,
+	CFG_11H_FEATURE_FLAGS,
 
 	/* <-- LAST --> */
 	CFG_TBL_FIX_LAST
@@ -155,7 +210,8 @@
 /* variable size table */
 enum {
 	CFG_NET_ADDR = 0,
-	CFG_PROFILE,
+	CFG_LED_PATTERN_TABLE,
+
 	/* <-- LAST --> */
 	CFG_TBL_VAR_LAST
 };
@@ -288,6 +344,9 @@
 /* iwm_umac_security.flag is WSC mode on -- bits [2:2] */
 #define UMAC_SEC_FLG_WSC_ON_POS		2
 #define UMAC_SEC_FLG_WSC_ON_SEED	1
+#define UMAC_SEC_FLG_WSC_ON_MSK         (UMAC_SEC_FLG_WSC_ON_SEED << \
+					 UMAC_SEC_FLG_WSC_ON_POS)
+
 
 /* Legacy profile can use only WEP40 and WEP104 for encryption and
  * OPEN or PSK for authentication */
@@ -382,6 +441,11 @@
 	u8 reserved[3];
 } __attribute__ ((packed));
 
+struct iwm_umac_pwr_trigger {
+	struct iwm_umac_wifi_if hdr;
+	__le32 reseved;
+} __attribute__ ((packed));
+
 struct iwm_umac_cmd_stats_req {
 	__le32 flags;
 } __attribute__ ((packed));
@@ -393,6 +457,7 @@
 int iwm_send_periodic_calib_cfg(struct iwm_priv *iwm, u8 calib_requested);
 int iwm_send_calib_results(struct iwm_priv *iwm);
 int iwm_store_rxiq_calib_result(struct iwm_priv *iwm);
+int iwm_send_ct_kill_cfg(struct iwm_priv *iwm, u8 entry, u8 exit);
 
 /* UMAC commands */
 int iwm_send_wifi_if_cmd(struct iwm_priv *iwm, void *payload, u16 payload_size,
@@ -407,6 +472,7 @@
 int iwm_send_packet(struct iwm_priv *iwm, struct sk_buff *skb, int pool_id);
 int iwm_set_tx_key(struct iwm_priv *iwm, u8 key_idx);
 int iwm_set_key(struct iwm_priv *iwm, bool remove, struct iwm_key *key);
+int iwm_tx_power_trigger(struct iwm_priv *iwm);
 int iwm_send_umac_stats_req(struct iwm_priv *iwm, u32 flags);
 int iwm_send_umac_channel_list(struct iwm_priv *iwm);
 int iwm_scan_ssids(struct iwm_priv *iwm, struct cfg80211_ssid *ssids,
diff --git a/drivers/net/wireless/iwmc3200wifi/fw.c b/drivers/net/wireless/iwmc3200wifi/fw.c
index 6b0bcad..4906709 100644
--- a/drivers/net/wireless/iwmc3200wifi/fw.c
+++ b/drivers/net/wireless/iwmc3200wifi/fw.c
@@ -217,6 +217,13 @@
 		 IWM_BUILD_YEAR(build_date), IWM_BUILD_MONTH(build_date),
 		 IWM_BUILD_DAY(build_date));
 
+	if (!strcmp(img_name, iwm->bus_ops->umac_name))
+		sprintf(iwm->umac_version, "%02X.%02X",
+			ver->major, ver->minor);
+
+	if (!strcmp(img_name, iwm->bus_ops->lmac_name))
+		sprintf(iwm->lmac_version, "%02X.%02X",
+			ver->major, ver->minor);
 
  err_release_fw:
 	release_firmware(fw);
@@ -398,6 +405,8 @@
 	iwm_send_prio_table(iwm);
 	iwm_send_calib_results(iwm);
 	iwm_send_periodic_calib_cfg(iwm, periodic_calib_map);
+	iwm_send_ct_kill_cfg(iwm, iwm->conf.ct_kill_entry,
+			     iwm->conf.ct_kill_exit);
 
 	return 0;
 
diff --git a/drivers/net/wireless/iwmc3200wifi/iwm.h b/drivers/net/wireless/iwmc3200wifi/iwm.h
index 1b02a4e..a9bf6bc 100644
--- a/drivers/net/wireless/iwmc3200wifi/iwm.h
+++ b/drivers/net/wireless/iwmc3200wifi/iwm.h
@@ -65,6 +65,8 @@
 	u32 sdio_ior_timeout;
 	unsigned long calib_map;
 	unsigned long expected_calib_map;
+	u8 ct_kill_entry;
+	u8 ct_kill_exit;
 	bool reset_on_fatal_err;
 	bool auto_connect;
 	bool wimax_not_present;
@@ -276,12 +278,14 @@
 	struct iw_statistics wstats;
 	struct delayed_work stats_request;
 	struct delayed_work disconnect;
+	struct delayed_work ct_kill_delay;
 
 	struct iwm_debugfs dbg;
 
 	u8 *eeprom;
 	struct timer_list watchdog;
 	struct work_struct reset_worker;
+	struct work_struct auth_retry_worker;
 	struct mutex mutex;
 
 	u8 *req_ie;
@@ -290,6 +294,8 @@
 	int resp_ie_len;
 
 	struct iwm_fw_error_hdr *last_fw_err;
+	char umac_version[8];
+	char lmac_version[8];
 
 	char private[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
diff --git a/drivers/net/wireless/iwmc3200wifi/lmac.h b/drivers/net/wireless/iwmc3200wifi/lmac.h
index 6c1a14c..a3a79b5 100644
--- a/drivers/net/wireless/iwmc3200wifi/lmac.h
+++ b/drivers/net/wireless/iwmc3200wifi/lmac.h
@@ -187,6 +187,14 @@
 				     COEX_EVT_FLAG_MEDIUM_ACTV_NTFY_MSK | \
 				     COEX_EVT_FLAG_DELAY_MEDIUM_FREE_NTFY_MSK)
 
+/* CT kill config command */
+struct iwm_ct_kill_cfg_cmd {
+	u32 exit_threshold;
+	u32 reserved;
+	u32 entry_threshold;
+} __attribute__ ((packed));
+
+
 /* LMAC OP CODES */
 #define REPLY_PAD			0x0
 #define REPLY_ALIVE			0x1
diff --git a/drivers/net/wireless/iwmc3200wifi/main.c b/drivers/net/wireless/iwmc3200wifi/main.c
index d668e47..f93e913 100644
--- a/drivers/net/wireless/iwmc3200wifi/main.c
+++ b/drivers/net/wireless/iwmc3200wifi/main.c
@@ -63,6 +63,8 @@
 				  BIT(PHY_CALIBRATE_TX_IQ_CMD)	|
 				  BIT(PHY_CALIBRATE_RX_IQ_CMD)	|
 				  BIT(SHILOH_PHY_CALIBRATE_BASE_BAND_CMD),
+	.ct_kill_entry		= 110,
+	.ct_kill_exit		= 110,
 	.reset_on_fatal_err	= 1,
 	.auto_connect		= 1,
 	.wimax_not_present	= 0,
@@ -133,6 +135,17 @@
 	cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0, GFP_KERNEL);
 }
 
+static void iwm_ct_kill_work(struct work_struct *work)
+{
+	struct iwm_priv *iwm =
+		container_of(work, struct iwm_priv, ct_kill_delay.work);
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+
+	IWM_INFO(iwm, "CT kill delay timeout\n");
+
+	wiphy_rfkill_set_hw_state(wiphy, false);
+}
+
 static int __iwm_up(struct iwm_priv *iwm);
 static int __iwm_down(struct iwm_priv *iwm);
 
@@ -194,6 +207,33 @@
 	mutex_unlock(&iwm->mutex);
 }
 
+static void iwm_auth_retry_worker(struct work_struct *work)
+{
+	struct iwm_priv *iwm;
+	int i, ret;
+
+	iwm = container_of(work, struct iwm_priv, auth_retry_worker);
+	if (iwm->umac_profile_active) {
+		ret = iwm_invalidate_mlme_profile(iwm);
+		if (ret < 0)
+			return;
+	}
+
+	iwm->umac_profile->sec.auth_type = UMAC_AUTH_TYPE_LEGACY_PSK;
+
+	ret = iwm_send_mlme_profile(iwm);
+	if (ret < 0)
+		return;
+
+	for (i = 0; i < IWM_NUM_KEYS; i++)
+		if (iwm->keys[i].key_len)
+			iwm_set_key(iwm, 0, &iwm->keys[i]);
+
+	iwm_set_tx_key(iwm, iwm->default_key);
+}
+
+
+
 static void iwm_watchdog(unsigned long data)
 {
 	struct iwm_priv *iwm = (struct iwm_priv *)data;
@@ -225,7 +265,9 @@
 	iwm->scan_id = 1;
 	INIT_DELAYED_WORK(&iwm->stats_request, iwm_statistics_request);
 	INIT_DELAYED_WORK(&iwm->disconnect, iwm_disconnect_work);
+	INIT_DELAYED_WORK(&iwm->ct_kill_delay, iwm_ct_kill_work);
 	INIT_WORK(&iwm->reset_worker, iwm_reset_worker);
+	INIT_WORK(&iwm->auth_retry_worker, iwm_auth_retry_worker);
 	INIT_LIST_HEAD(&iwm->bss_list);
 
 	skb_queue_head_init(&iwm->rx_list);
@@ -586,6 +628,7 @@
 {
 	int ret;
 	struct iwm_notif *notif_reboot, *notif_ack = NULL;
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
 
 	ret = iwm_bus_enable(iwm);
 	if (ret) {
@@ -637,6 +680,8 @@
 		IWM_ERR(iwm, "MAC reading failed\n");
 		goto err_disable;
 	}
+	memcpy(iwm_to_ndev(iwm)->perm_addr, iwm_to_ndev(iwm)->dev_addr,
+		ETH_ALEN);
 
 	/* We can load the FWs */
 	ret = iwm_load_fw(iwm);
@@ -645,6 +690,9 @@
 		goto err_disable;
 	}
 
+	snprintf(wiphy->fw_version, sizeof(wiphy->fw_version), "L%s_U%s",
+		 iwm->lmac_version, iwm->umac_version);
+
 	/* We configure the UMAC and enable the wifi module */
 	ret = iwm_send_umac_config(iwm,
 			cpu_to_le32(UMAC_RST_CTRL_FLG_WIFI_CORE_EN) |
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index 35ec006..4f8dbdd 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -152,6 +152,7 @@
 	if (!iwm_to_ndev(iwm))
 		return;
 
+	cancel_delayed_work_sync(&iwm->ct_kill_delay);
 	free_netdev(iwm_to_ndev(iwm));
 	iwm_priv_deinit(iwm);
 	kfree(iwm->umac_profile);
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 40dbcbc..3ad95dc 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -422,7 +422,9 @@
 			if (IS_ERR(ticket_node))
 				return PTR_ERR(ticket_node);
 
-			IWM_DBG_RX(iwm, DBG, "TICKET RELEASE(%d)\n",
+			IWM_DBG_RX(iwm, DBG, "TICKET %s(%d)\n",
+				   ticket->action ==  IWM_RX_TICKET_RELEASE ?
+				   "RELEASE" : "DROP",
 				   ticket->id);
 			list_add_tail(&ticket_node->node, &iwm->rx_tickets);
 
@@ -499,6 +501,18 @@
 	return 0;
 }
 
+static u8 iwm_is_open_wep_profile(struct iwm_priv *iwm)
+{
+	if ((iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_40 ||
+	     iwm->umac_profile->sec.ucast_cipher == UMAC_CIPHER_TYPE_WEP_104) &&
+	    (iwm->umac_profile->sec.ucast_cipher ==
+	     iwm->umac_profile->sec.mcast_cipher) &&
+	    (iwm->umac_profile->sec.auth_type == UMAC_AUTH_TYPE_OPEN))
+	       return 1;
+
+       return 0;
+}
+
 static int iwm_mlme_assoc_complete(struct iwm_priv *iwm, u8 *buf,
 				   unsigned long buf_size,
 				   struct iwm_wifi_cmd *cmd)
@@ -564,11 +578,17 @@
 			goto ibss;
 
 		if (!test_bit(IWM_STATUS_RESETTING, &iwm->status))
-			cfg80211_connect_result(iwm_to_ndev(iwm),
-						complete->bssid,
-						NULL, 0, NULL, 0,
-						WLAN_STATUS_UNSPECIFIED_FAILURE,
-						GFP_KERNEL);
+			if (!iwm_is_open_wep_profile(iwm)) {
+				cfg80211_connect_result(iwm_to_ndev(iwm),
+					       complete->bssid,
+					       NULL, 0, NULL, 0,
+					       WLAN_STATUS_UNSPECIFIED_FAILURE,
+					       GFP_KERNEL);
+			} else {
+				/* Let's try shared WEP auth */
+				IWM_ERR(iwm, "Trying WEP shared auth\n");
+				schedule_work(&iwm->auth_retry_worker);
+			}
 		else
 			cfg80211_disconnected(iwm_to_ndev(iwm), 0, NULL, 0,
 					      GFP_KERNEL);
@@ -712,6 +732,19 @@
 	return 0;
 }
 
+static int iwm_mlme_medium_lost(struct iwm_priv *iwm, u8 *buf,
+				unsigned long buf_size,
+				struct iwm_wifi_cmd *cmd)
+{
+	struct wiphy *wiphy = iwm_to_wiphy(iwm);
+
+	IWM_DBG_NTF(iwm, DBG, "WiFi/WiMax coexistence radio is OFF\n");
+
+	wiphy_rfkill_set_hw_state(wiphy, true);
+
+	return 0;
+}
+
 static int iwm_mlme_update_bss_table(struct iwm_priv *iwm, u8 *buf,
 				     unsigned long buf_size,
 				     struct iwm_wifi_cmd *cmd)
@@ -898,6 +931,8 @@
 	case WIFI_IF_NTFY_EXTENDED_IE_REQUIRED:
 		IWM_DBG_MLME(iwm, DBG, "Extended IE required\n");
 		break;
+	case WIFI_IF_NTFY_RADIO_PREEMPTION:
+		return iwm_mlme_medium_lost(iwm, buf, buf_size, cmd);
 	case WIFI_IF_NTFY_BSS_TRK_TABLE_CHANGED:
 		return iwm_mlme_update_bss_table(iwm, buf, buf_size, cmd);
 	case WIFI_IF_NTFY_BSS_TRK_ENTRIES_REMOVED:
@@ -1055,8 +1090,14 @@
 				   unsigned long buf_size,
 				   struct iwm_wifi_cmd *cmd)
 {
-	struct iwm_umac_wifi_if *hdr =
-			(struct iwm_umac_wifi_if *)cmd->buf.payload;
+	struct iwm_umac_wifi_if *hdr;
+
+	if (cmd == NULL) {
+		IWM_ERR(iwm, "Couldn't find expected wifi command\n");
+		return -EINVAL;
+	}
+
+	hdr = (struct iwm_umac_wifi_if *)cmd->buf.payload;
 
 	IWM_DBG_NTF(iwm, DBG, "WIFI_IF_WRAPPER cmd is delivered to UMAC: "
 		    "oid is 0x%x\n", hdr->oid);
@@ -1078,6 +1119,7 @@
 	return 0;
 }
 
+#define CT_KILL_DELAY (30 * HZ)
 static int iwm_ntf_card_state(struct iwm_priv *iwm, u8 *buf,
 			      unsigned long buf_size, struct iwm_wifi_cmd *cmd)
 {
@@ -1090,7 +1132,20 @@
 		 flags & IWM_CARD_STATE_HW_DISABLED ? "ON" : "OFF",
 		 flags & IWM_CARD_STATE_CTKILL_DISABLED ? "ON" : "OFF");
 
-	wiphy_rfkill_set_hw_state(wiphy, flags & IWM_CARD_STATE_HW_DISABLED);
+	if (flags & IWM_CARD_STATE_CTKILL_DISABLED) {
+		/*
+		 * We got a CTKILL event: We bring the interface down in
+		 * oder to cool the device down, and try to bring it up
+		 * 30 seconds later. If it's still too hot, we'll go through
+		 * this code path again.
+		 */
+		cancel_delayed_work_sync(&iwm->ct_kill_delay);
+		schedule_delayed_work(&iwm->ct_kill_delay, CT_KILL_DELAY);
+	}
+
+	wiphy_rfkill_set_hw_state(wiphy, flags &
+				  (IWM_CARD_STATE_HW_DISABLED |
+				   IWM_CARD_STATE_CTKILL_DISABLED));
 
 	return 0;
 }
@@ -1281,6 +1336,14 @@
 
 	switch (le32_to_cpu(hdr->cmd)) {
 	case UMAC_REBOOT_BARKER:
+		if (test_bit(IWM_STATUS_READY, &iwm->status)) {
+			IWM_ERR(iwm, "Unexpected BARKER\n");
+
+			schedule_work(&iwm->reset_worker);
+
+			return 0;
+		}
+
 		return iwm_notif_send(iwm, NULL, IWM_BARKER_REBOOT_NOTIFICATION,
 				      IWM_SRC_UDMA, buf, buf_size);
 	case UMAC_ACK_BARKER:
@@ -1443,7 +1506,8 @@
 		}
 		break;
 	case IWM_RX_TICKET_DROP:
-		IWM_DBG_RX(iwm, DBG, "DROP packet\n");
+		IWM_DBG_RX(iwm, DBG, "DROP packet: 0x%x\n",
+			   le16_to_cpu(ticket_node->ticket->flags));
 		kfree_skb(packet->skb);
 		break;
 	default:
diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c
index 8b1de84..cf86294 100644
--- a/drivers/net/wireless/iwmc3200wifi/sdio.c
+++ b/drivers/net/wireless/iwmc3200wifi/sdio.c
@@ -224,8 +224,6 @@
 	struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm);
 	int ret;
 
-	iwm_reset(iwm);
-
 	sdio_claim_host(hw->func);
 	sdio_writeb(hw->func, 0, IWM_SDIO_INTR_ENABLE_ADDR, &ret);
 	if (ret < 0)
@@ -237,6 +235,8 @@
 
 	iwm_sdio_rx_free(hw);
 
+	iwm_reset(iwm);
+
 	IWM_DBG_SDIO(iwm, INFO, "IWM SDIO disable\n");
 
 	return 0;
@@ -493,8 +493,10 @@
 }
 
 static const struct sdio_device_id iwm_sdio_ids[] = {
-	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL,
-		      SDIO_DEVICE_ID_INTEL_IWMC3200WIFI) },
+	/* Global/AGN SKU */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, 0x1403) },
+	/* BGN SKU */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_INTEL, 0x1408) },
 	{ /* end: all zeroes */	},
 };
 MODULE_DEVICE_TABLE(sdio, iwm_sdio_ids);
diff --git a/drivers/net/wireless/iwmc3200wifi/umac.h b/drivers/net/wireless/iwmc3200wifi/umac.h
index c5a14ae..be90354 100644
--- a/drivers/net/wireless/iwmc3200wifi/umac.h
+++ b/drivers/net/wireless/iwmc3200wifi/umac.h
@@ -687,6 +687,9 @@
 /* Tx/Rx rates window (number of max of last update window per second) */
 #define UMAC_NTF_RATE_SAMPLE_NR	4
 
+/* Max numbers of bits required to go through all antennae in bitmasks */
+#define UMAC_PHY_NUM_CHAINS     3
+
 #define IWM_UMAC_MGMT_TID	8
 #define IWM_UMAC_TID_NR		8
 
@@ -697,9 +700,11 @@
 	__le16 tid_load[IWM_UMAC_TID_NR + 2]; /* 1 non-QoS + 1 dword align */
 	__le16 tx_rate[UMAC_NTF_RATE_SAMPLE_NR];
 	__le16 rx_rate[UMAC_NTF_RATE_SAMPLE_NR];
+	__le32 chain_energy[UMAC_PHY_NUM_CHAINS];
 	s32 rssi_dbm;
 	s32 noise_dbm;
 	__le32 supp_rates;
+	__le32 supp_ht_rates;
 	__le32 missed_beacons;
 	__le32 rx_beacons;
 	__le32 rx_dir_pkts;
diff --git a/drivers/net/wireless/libertas/11d.c b/drivers/net/wireless/libertas/11d.c
deleted file mode 100644
index 5c69681..0000000
--- a/drivers/net/wireless/libertas/11d.c
+++ /dev/null
@@ -1,696 +0,0 @@
-/**
-  * This file contains functions for 802.11D.
-  */
-#include <linux/ctype.h>
-#include <linux/kernel.h>
-#include <linux/wireless.h>
-
-#include "host.h"
-#include "decl.h"
-#include "11d.h"
-#include "dev.h"
-#include "wext.h"
-
-#define TX_PWR_DEFAULT	10
-
-static struct region_code_mapping region_code_mapping[] = {
-	{"US ", 0x10},		/* US FCC      */
-	{"CA ", 0x10},		/* IC Canada   */
-	{"SG ", 0x10},		/* Singapore   */
-	{"EU ", 0x30},		/* ETSI        */
-	{"AU ", 0x30},		/* Australia   */
-	{"KR ", 0x30},		/* Republic Of Korea */
-	{"ES ", 0x31},		/* Spain       */
-	{"FR ", 0x32},		/* France      */
-	{"JP ", 0x40},		/* Japan       */
-};
-
-/* Following 2 structure defines the supported channels */
-static struct chan_freq_power channel_freq_power_UN_BG[] = {
-	{1, 2412, TX_PWR_DEFAULT},
-	{2, 2417, TX_PWR_DEFAULT},
-	{3, 2422, TX_PWR_DEFAULT},
-	{4, 2427, TX_PWR_DEFAULT},
-	{5, 2432, TX_PWR_DEFAULT},
-	{6, 2437, TX_PWR_DEFAULT},
-	{7, 2442, TX_PWR_DEFAULT},
-	{8, 2447, TX_PWR_DEFAULT},
-	{9, 2452, TX_PWR_DEFAULT},
-	{10, 2457, TX_PWR_DEFAULT},
-	{11, 2462, TX_PWR_DEFAULT},
-	{12, 2467, TX_PWR_DEFAULT},
-	{13, 2472, TX_PWR_DEFAULT},
-	{14, 2484, TX_PWR_DEFAULT}
-};
-
-static u8 lbs_region_2_code(u8 *region)
-{
-	u8 i;
-
-	for (i = 0; i < COUNTRY_CODE_LEN && region[i]; i++)
-		region[i] = toupper(region[i]);
-
-	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
-		if (!memcmp(region, region_code_mapping[i].region,
-			    COUNTRY_CODE_LEN))
-			return (region_code_mapping[i].code);
-	}
-
-	/* default is US */
-	return (region_code_mapping[0].code);
-}
-
-static u8 *lbs_code_2_region(u8 code)
-{
-	u8 i;
-
-	for (i = 0; i < ARRAY_SIZE(region_code_mapping); i++) {
-		if (region_code_mapping[i].code == code)
-			return (region_code_mapping[i].region);
-	}
-	/* default is US */
-	return (region_code_mapping[0].region);
-}
-
-/**
- *  @brief This function finds the nrchan-th chan after the firstchan
- *  @param band       band
- *  @param firstchan  first channel number
- *  @param nrchan   number of channels
- *  @return 	      the nrchan-th chan number
-*/
-static u8 lbs_get_chan_11d(u8 firstchan, u8 nrchan, u8 *chan)
-/*find the nrchan-th chan after the firstchan*/
-{
-	u8 i;
-	struct chan_freq_power *cfp;
-	u8 cfp_no;
-
-	cfp = channel_freq_power_UN_BG;
-	cfp_no = ARRAY_SIZE(channel_freq_power_UN_BG);
-
-	for (i = 0; i < cfp_no; i++) {
-		if ((cfp + i)->channel == firstchan) {
-			lbs_deb_11d("firstchan found\n");
-			break;
-		}
-	}
-
-	if (i < cfp_no) {
-		/*if beyond the boundary */
-		if (i + nrchan < cfp_no) {
-			*chan = (cfp + i + nrchan)->channel;
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-/**
- *  @brief This function Checks if chan txpwr is learned from AP/IBSS
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                TRUE; FALSE
-*/
-static u8 lbs_channel_known_11d(u8 chan,
-			  struct parsed_region_chan_11d * parsed_region_chan)
-{
-	struct chan_power_11d *chanpwr = parsed_region_chan->chanpwr;
-	u8 nr_chan = parsed_region_chan->nr_chan;
-	u8 i = 0;
-
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (char *)chanpwr,
-		sizeof(struct chan_power_11d) * nr_chan);
-
-	for (i = 0; i < nr_chan; i++) {
-		if (chan == chanpwr[i].chan) {
-			lbs_deb_11d("found chan %d\n", chan);
-			return 1;
-		}
-	}
-
-	lbs_deb_11d("chan %d not found\n", chan);
-	return 0;
-}
-
-u32 lbs_chan_2_freq(u8 chan)
-{
-	struct chan_freq_power *cf;
-	u16 i;
-	u32 freq = 0;
-
-	cf = channel_freq_power_UN_BG;
-
-	for (i = 0; i < ARRAY_SIZE(channel_freq_power_UN_BG); i++) {
-		if (chan == cf[i].channel)
-			freq = cf[i].freq;
-	}
-
-	return freq;
-}
-
-static int generate_domain_info_11d(struct parsed_region_chan_11d
-				  *parsed_region_chan,
-				  struct lbs_802_11d_domain_reg *domaininfo)
-{
-	u8 nr_subband = 0;
-
-	u8 nr_chan = parsed_region_chan->nr_chan;
-	u8 nr_parsedchan = 0;
-
-	u8 firstchan = 0, nextchan = 0, maxpwr = 0;
-
-	u8 i, flag = 0;
-
-	memcpy(domaininfo->countrycode, parsed_region_chan->countrycode,
-	       COUNTRY_CODE_LEN);
-
-	lbs_deb_11d("nrchan %d\n", nr_chan);
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (char *)parsed_region_chan,
-		sizeof(struct parsed_region_chan_11d));
-
-	for (i = 0; i < nr_chan; i++) {
-		if (!flag) {
-			flag = 1;
-			nextchan = firstchan =
-			    parsed_region_chan->chanpwr[i].chan;
-			maxpwr = parsed_region_chan->chanpwr[i].pwr;
-			nr_parsedchan = 1;
-			continue;
-		}
-
-		if (parsed_region_chan->chanpwr[i].chan == nextchan + 1 &&
-		    parsed_region_chan->chanpwr[i].pwr == maxpwr) {
-			nextchan++;
-			nr_parsedchan++;
-		} else {
-			domaininfo->subband[nr_subband].firstchan = firstchan;
-			domaininfo->subband[nr_subband].nrchan =
-			    nr_parsedchan;
-			domaininfo->subband[nr_subband].maxtxpwr = maxpwr;
-			nr_subband++;
-			nextchan = firstchan =
-			    parsed_region_chan->chanpwr[i].chan;
-			maxpwr = parsed_region_chan->chanpwr[i].pwr;
-		}
-	}
-
-	if (flag) {
-		domaininfo->subband[nr_subband].firstchan = firstchan;
-		domaininfo->subband[nr_subband].nrchan = nr_parsedchan;
-		domaininfo->subband[nr_subband].maxtxpwr = maxpwr;
-		nr_subband++;
-	}
-	domaininfo->nr_subband = nr_subband;
-
-	lbs_deb_11d("nr_subband=%x\n", domaininfo->nr_subband);
-	lbs_deb_hex(LBS_DEB_11D, "domaininfo", (char *)domaininfo,
-		COUNTRY_CODE_LEN + 1 +
-		sizeof(struct ieee_subbandset) * nr_subband);
-	return 0;
-}
-
-/**
- *  @brief This function generates parsed_region_chan from Domain Info learned from AP/IBSS
- *  @param region_chan          pointer to struct region_channel
- *  @param *parsed_region_chan  pointer to parsed_region_chan_11d
- *  @return 	                N/A
-*/
-static void lbs_generate_parsed_region_chan_11d(struct region_channel *region_chan,
-					  struct parsed_region_chan_11d *
-					  parsed_region_chan)
-{
-	u8 i;
-	struct chan_freq_power *cfp;
-
-	if (region_chan == NULL) {
-		lbs_deb_11d("region_chan is NULL\n");
-		return;
-	}
-
-	cfp = region_chan->CFP;
-	if (cfp == NULL) {
-		lbs_deb_11d("cfp is NULL \n");
-		return;
-	}
-
-	parsed_region_chan->band = region_chan->band;
-	parsed_region_chan->region = region_chan->region;
-	memcpy(parsed_region_chan->countrycode,
-	       lbs_code_2_region(region_chan->region), COUNTRY_CODE_LEN);
-
-	lbs_deb_11d("region 0x%x, band %d\n", parsed_region_chan->region,
-	       parsed_region_chan->band);
-
-	for (i = 0; i < region_chan->nrcfp; i++, cfp++) {
-		parsed_region_chan->chanpwr[i].chan = cfp->channel;
-		parsed_region_chan->chanpwr[i].pwr = cfp->maxtxpower;
-		lbs_deb_11d("chan %d, pwr %d\n",
-		       parsed_region_chan->chanpwr[i].chan,
-		       parsed_region_chan->chanpwr[i].pwr);
-	}
-	parsed_region_chan->nr_chan = region_chan->nrcfp;
-
-	lbs_deb_11d("nrchan %d\n", parsed_region_chan->nr_chan);
-
-	return;
-}
-
-/**
- *  @brief generate parsed_region_chan from Domain Info learned from AP/IBSS
- *  @param region               region ID
- *  @param band                 band
- *  @param chan                 chan
- *  @return 	                TRUE;FALSE
-*/
-static u8 lbs_region_chan_supported_11d(u8 region, u8 chan)
-{
-	struct chan_freq_power *cfp;
-	int cfp_no;
-	u8 idx;
-	int ret = 0;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	cfp = lbs_get_region_cfp_table(region, &cfp_no);
-	if (cfp == NULL)
-		return 0;
-
-	for (idx = 0; idx < cfp_no; idx++) {
-		if (chan == (cfp + idx)->channel) {
-			/* If Mrvl Chip Supported? */
-			if ((cfp + idx)->unsupported) {
-				ret = 0;
-			} else {
-				ret = 1;
-			}
-			goto done;
-		}
-	}
-
-	/*chan is not in the region table */
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function checks if chan txpwr is learned from AP/IBSS
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                0
-*/
-static int parse_domain_info_11d(struct ieee_ie_country_info_full_set *countryinfo,
-				 u8 band,
-				 struct parsed_region_chan_11d *parsed_region_chan)
-{
-	u8 nr_subband, nrchan;
-	u8 lastchan, firstchan;
-	u8 region;
-	u8 curchan = 0;
-
-	u8 idx = 0;		/*chan index in parsed_region_chan */
-
-	u8 j, i;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	/*validation Rules:
-	   1. valid region Code
-	   2. First Chan increment
-	   3. channel range no overlap
-	   4. channel is valid?
-	   5. channel is supported by region?
-	   6. Others
-	 */
-
-	lbs_deb_hex(LBS_DEB_11D, "countryinfo", (u8 *) countryinfo, 30);
-
-	if ((*(countryinfo->countrycode)) == 0
-	    || (countryinfo->header.len <= COUNTRY_CODE_LEN)) {
-		/* No region Info or Wrong region info: treat as No 11D info */
-		goto done;
-	}
-
-	/*Step1: check region_code */
-	parsed_region_chan->region = region =
-	    lbs_region_2_code(countryinfo->countrycode);
-
-	lbs_deb_11d("regioncode=%x\n", (u8) parsed_region_chan->region);
-	lbs_deb_hex(LBS_DEB_11D, "countrycode", (char *)countryinfo->countrycode,
-		COUNTRY_CODE_LEN);
-
-	parsed_region_chan->band = band;
-
-	memcpy(parsed_region_chan->countrycode, countryinfo->countrycode,
-	       COUNTRY_CODE_LEN);
-
-	nr_subband = (countryinfo->header.len - COUNTRY_CODE_LEN) /
-	    sizeof(struct ieee_subbandset);
-
-	for (j = 0, lastchan = 0; j < nr_subband; j++) {
-
-		if (countryinfo->subband[j].firstchan <= lastchan) {
-			/*Step2&3. Check First Chan Num increment and no overlap */
-			lbs_deb_11d("chan %d>%d, overlap\n",
-			       countryinfo->subband[j].firstchan, lastchan);
-			continue;
-		}
-
-		firstchan = countryinfo->subband[j].firstchan;
-		nrchan = countryinfo->subband[j].nrchan;
-
-		for (i = 0; idx < MAX_NO_OF_CHAN && i < nrchan; i++) {
-			/*step4: channel is supported? */
-
-			if (!lbs_get_chan_11d(firstchan, i, &curchan)) {
-				/* Chan is not found in UN table */
-				lbs_deb_11d("chan is not supported: %d \n", i);
-				break;
-			}
-
-			lastchan = curchan;
-
-			if (lbs_region_chan_supported_11d(region, curchan)) {
-				/*step5: Check if curchan is supported by mrvl in region */
-				parsed_region_chan->chanpwr[idx].chan = curchan;
-				parsed_region_chan->chanpwr[idx].pwr =
-				    countryinfo->subband[j].maxtxpwr;
-				idx++;
-			} else {
-				/*not supported and ignore the chan */
-				lbs_deb_11d(
-				       "i %d, chan %d unsupported in region %x, band %d\n",
-				       i, curchan, region, band);
-			}
-		}
-
-		/*Step6: Add other checking if any */
-
-	}
-
-	parsed_region_chan->nr_chan = idx;
-
-	lbs_deb_11d("nrchan=%x\n", parsed_region_chan->nr_chan);
-	lbs_deb_hex(LBS_DEB_11D, "parsed_region_chan", (u8 *) parsed_region_chan,
-		2 + COUNTRY_CODE_LEN + sizeof(struct parsed_region_chan_11d) * idx);
-
-done:
-	lbs_deb_enter(LBS_DEB_11D);
-	return 0;
-}
-
-/**
- *  @brief This function calculates the scan type for channels
- *  @param chan                 chan number
- *  @param parsed_region_chan   pointer to parsed_region_chan_11d
- *  @return 	                PASSIVE if chan is unknown; ACTIVE if chan is known
-*/
-u8 lbs_get_scan_type_11d(u8 chan,
-			  struct parsed_region_chan_11d * parsed_region_chan)
-{
-	u8 scan_type = CMD_SCAN_TYPE_PASSIVE;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	if (lbs_channel_known_11d(chan, parsed_region_chan)) {
-		lbs_deb_11d("found, do active scan\n");
-		scan_type = CMD_SCAN_TYPE_ACTIVE;
-	} else {
-		lbs_deb_11d("not found, do passive scan\n");
-	}
-
-	lbs_deb_leave_args(LBS_DEB_11D, "ret scan_type %d", scan_type);
-	return scan_type;
-
-}
-
-void lbs_init_11d(struct lbs_private *priv)
-{
-	priv->enable11d = 0;
-	memset(&(priv->parsed_region_chan), 0,
-	       sizeof(struct parsed_region_chan_11d));
-	return;
-}
-
-/**
- *  @brief This function sets DOMAIN INFO to FW
- *  @param priv       pointer to struct lbs_private
- *  @return 	      0; -1
-*/
-static int set_domain_info_11d(struct lbs_private *priv)
-{
-	int ret;
-
-	if (!priv->enable11d) {
-		lbs_deb_11d("dnld domain Info with 11d disabled\n");
-		return 0;
-	}
-
-	ret = lbs_prepare_and_send_command(priv, CMD_802_11D_DOMAIN_INFO,
-				    CMD_ACT_SET,
-				    CMD_OPTION_WAITFORRSP, 0, NULL);
-	if (ret)
-		lbs_deb_11d("fail to dnld domain info\n");
-
-	return ret;
-}
-
-/**
- *  @brief This function setups scan channels
- *  @param priv       pointer to struct lbs_private
- *  @param band       band
- *  @return 	      0
-*/
-int lbs_set_universaltable(struct lbs_private *priv, u8 band)
-{
-	u16 size = sizeof(struct chan_freq_power);
-	u16 i = 0;
-
-	memset(priv->universal_channel, 0,
-	       sizeof(priv->universal_channel));
-
-	priv->universal_channel[i].nrcfp =
-	    sizeof(channel_freq_power_UN_BG) / size;
-	lbs_deb_11d("BG-band nrcfp %d\n",
-	       priv->universal_channel[i].nrcfp);
-
-	priv->universal_channel[i].CFP = channel_freq_power_UN_BG;
-	priv->universal_channel[i].valid = 1;
-	priv->universal_channel[i].region = UNIVERSAL_REGION_CODE;
-	priv->universal_channel[i].band = band;
-	i++;
-
-	return 0;
-}
-
-/**
- *  @brief This function implements command CMD_802_11D_DOMAIN_INFO
- *  @param priv       pointer to struct lbs_private
- *  @param cmd        pointer to cmd buffer
- *  @param cmdno      cmd ID
- *  @param cmdOption  cmd action
- *  @return 	      0
-*/
-int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd, u16 cmdno,
-				 u16 cmdoption)
-{
-	struct cmd_ds_802_11d_domain_info *pdomaininfo =
-	    &cmd->params.domaininfo;
-	struct mrvl_ie_domain_param_set *domain = &pdomaininfo->domain;
-	u8 nr_subband = priv->domainreg.nr_subband;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	lbs_deb_11d("nr_subband=%x\n", nr_subband);
-
-	cmd->command = cpu_to_le16(cmdno);
-	pdomaininfo->action = cpu_to_le16(cmdoption);
-	if (cmdoption == CMD_ACT_GET) {
-		cmd->size =
-		    cpu_to_le16(sizeof(pdomaininfo->action) + S_DS_GEN);
-		lbs_deb_hex(LBS_DEB_11D, "802_11D_DOMAIN_INFO", (u8 *) cmd,
-			le16_to_cpu(cmd->size));
-		goto done;
-	}
-
-	domain->header.type = cpu_to_le16(TLV_TYPE_DOMAIN);
-	memcpy(domain->countrycode, priv->domainreg.countrycode,
-	       sizeof(domain->countrycode));
-
-	domain->header.len =
-	    cpu_to_le16(nr_subband * sizeof(struct ieee_subbandset) +
-			     sizeof(domain->countrycode));
-
-	if (nr_subband) {
-		memcpy(domain->subband, priv->domainreg.subband,
-		       nr_subband * sizeof(struct ieee_subbandset));
-
-		cmd->size = cpu_to_le16(sizeof(pdomaininfo->action) +
-					     le16_to_cpu(domain->header.len) +
-					     sizeof(struct mrvl_ie_header) +
-					     S_DS_GEN);
-	} else {
-		cmd->size =
-		    cpu_to_le16(sizeof(pdomaininfo->action) + S_DS_GEN);
-	}
-
-	lbs_deb_hex(LBS_DEB_11D, "802_11D_DOMAIN_INFO", (u8 *) cmd, le16_to_cpu(cmd->size));
-
-done:
-	lbs_deb_enter(LBS_DEB_11D);
-	return 0;
-}
-
-/**
- *  @brief This function parses countryinfo from AP and download country info to FW
- *  @param priv    pointer to struct lbs_private
- *  @param resp    pointer to command response buffer
- *  @return 	   0; -1
- */
-int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11d_domain_info *domaininfo = &resp->params.domaininforesp;
-	struct mrvl_ie_domain_param_set *domain = &domaininfo->domain;
-	u16 action = le16_to_cpu(domaininfo->action);
-	s16 ret = 0;
-	u8 nr_subband = 0;
-
-	lbs_deb_enter(LBS_DEB_11D);
-
-	lbs_deb_hex(LBS_DEB_11D, "domain info resp", (u8 *) resp,
-		(int)le16_to_cpu(resp->size));
-
-	nr_subband = (le16_to_cpu(domain->header.len) - COUNTRY_CODE_LEN) /
-		      sizeof(struct ieee_subbandset);
-
-	lbs_deb_11d("domain info resp: nr_subband %d\n", nr_subband);
-
-	if (nr_subband > MRVDRV_MAX_SUBBAND_802_11D) {
-		lbs_deb_11d("Invalid Numrer of Subband returned!!\n");
-		return -1;
-	}
-
-	switch (action) {
-	case CMD_ACT_SET:	/*Proc Set action */
-		break;
-
-	case CMD_ACT_GET:
-		break;
-	default:
-		lbs_deb_11d("Invalid action:%d\n", domaininfo->action);
-		ret = -1;
-		break;
-	}
-
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function parses countryinfo from AP and download country info to FW
- *  @param priv    pointer to struct lbs_private
- *  @return 	   0; -1
- */
-int lbs_parse_dnld_countryinfo_11d(struct lbs_private *priv,
-                                        struct bss_descriptor * bss)
-{
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_11D);
-	if (priv->enable11d) {
-		memset(&priv->parsed_region_chan, 0,
-		       sizeof(struct parsed_region_chan_11d));
-		ret = parse_domain_info_11d(&bss->countryinfo, 0,
-					       &priv->parsed_region_chan);
-
-		if (ret == -1) {
-			lbs_deb_11d("error parsing domain_info from AP\n");
-			goto done;
-		}
-
-		memset(&priv->domainreg, 0,
-		       sizeof(struct lbs_802_11d_domain_reg));
-		generate_domain_info_11d(&priv->parsed_region_chan,
-				      &priv->domainreg);
-
-		ret = set_domain_info_11d(priv);
-
-		if (ret) {
-			lbs_deb_11d("error setting domain info\n");
-			goto done;
-		}
-	}
-	ret = 0;
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
-
-/**
- *  @brief This function generates 11D info from user specified regioncode and download to FW
- *  @param priv    pointer to struct lbs_private
- *  @return 	   0; -1
- */
-int lbs_create_dnld_countryinfo_11d(struct lbs_private *priv)
-{
-	int ret;
-	struct region_channel *region_chan;
-	u8 j;
-
-	lbs_deb_enter(LBS_DEB_11D);
-	lbs_deb_11d("curbssparams.band %d\n", priv->curbssparams.band);
-
-	if (priv->enable11d) {
-		/* update parsed_region_chan_11; dnld domaininf to FW */
-
-		for (j = 0; j < ARRAY_SIZE(priv->region_channel); j++) {
-			region_chan = &priv->region_channel[j];
-
-			lbs_deb_11d("%d region_chan->band %d\n", j,
-			       region_chan->band);
-
-			if (!region_chan || !region_chan->valid
-			    || !region_chan->CFP)
-				continue;
-			if (region_chan->band != priv->curbssparams.band)
-				continue;
-			break;
-		}
-
-		if (j >= ARRAY_SIZE(priv->region_channel)) {
-			lbs_deb_11d("region_chan not found, band %d\n",
-			       priv->curbssparams.band);
-			ret = -1;
-			goto done;
-		}
-
-		memset(&priv->parsed_region_chan, 0,
-		       sizeof(struct parsed_region_chan_11d));
-		lbs_generate_parsed_region_chan_11d(region_chan,
-						     &priv->
-						     parsed_region_chan);
-
-		memset(&priv->domainreg, 0,
-		       sizeof(struct lbs_802_11d_domain_reg));
-		generate_domain_info_11d(&priv->parsed_region_chan,
-					 &priv->domainreg);
-
-		ret = set_domain_info_11d(priv);
-
-		if (ret) {
-			lbs_deb_11d("error setting domain info\n");
-			goto done;
-		}
-
-	}
-	ret = 0;
-
-done:
-	lbs_deb_leave_args(LBS_DEB_11D, "ret %d", ret);
-	return ret;
-}
diff --git a/drivers/net/wireless/libertas/11d.h b/drivers/net/wireless/libertas/11d.h
deleted file mode 100644
index fb75d3e..0000000
--- a/drivers/net/wireless/libertas/11d.h
+++ /dev/null
@@ -1,105 +0,0 @@
-/**
-  * This header file contains data structures and
-  * function declarations of 802.11d
-  */
-#ifndef _LBS_11D_
-#define _LBS_11D_
-
-#include "types.h"
-#include "defs.h"
-
-#define UNIVERSAL_REGION_CODE			0xff
-
-/** (Beaconsize(256)-5(IEId,len,contrystr(3))/3(FirstChan,NoOfChan,MaxPwr)
- */
-#define MRVDRV_MAX_SUBBAND_802_11D		83
-
-#define COUNTRY_CODE_LEN			3
-#define MAX_NO_OF_CHAN 				40
-
-struct cmd_ds_command;
-
-/** Data structure for Country IE*/
-struct ieee_subbandset {
-	u8 firstchan;
-	u8 nrchan;
-	u8 maxtxpwr;
-} __attribute__ ((packed));
-
-struct ieee_ie_country_info_set {
-	struct ieee_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[1];
-};
-
-struct ieee_ie_country_info_full_set {
-	struct ieee_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
-} __attribute__ ((packed));
-
-struct mrvl_ie_domain_param_set {
-	struct mrvl_ie_header header;
-
-	u8 countrycode[COUNTRY_CODE_LEN];
-	struct ieee_subbandset subband[1];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11d_domain_info {
-	__le16 action;
-	struct mrvl_ie_domain_param_set domain;
-} __attribute__ ((packed));
-
-/** domain regulatory information */
-struct lbs_802_11d_domain_reg {
-	/** country Code*/
-	u8 countrycode[COUNTRY_CODE_LEN];
-	/** No. of subband*/
-	u8 nr_subband;
-	struct ieee_subbandset subband[MRVDRV_MAX_SUBBAND_802_11D];
-};
-
-struct chan_power_11d {
-	u8 chan;
-	u8 pwr;
-} __attribute__ ((packed));
-
-struct parsed_region_chan_11d {
-	u8 band;
-	u8 region;
-	s8 countrycode[COUNTRY_CODE_LEN];
-	struct chan_power_11d chanpwr[MAX_NO_OF_CHAN];
-	u8 nr_chan;
-} __attribute__ ((packed));
-
-struct region_code_mapping {
-	u8 region[COUNTRY_CODE_LEN];
-	u8 code;
-};
-
-struct lbs_private;
-
-u8 lbs_get_scan_type_11d(u8 chan,
-			  struct parsed_region_chan_11d *parsed_region_chan);
-
-u32 lbs_chan_2_freq(u8 chan);
-
-void lbs_init_11d(struct lbs_private *priv);
-
-int lbs_set_universaltable(struct lbs_private *priv, u8 band);
-
-int lbs_cmd_802_11d_domain_info(struct lbs_private *priv,
-				 struct cmd_ds_command *cmd, u16 cmdno,
-				 u16 cmdOption);
-
-int lbs_ret_802_11d_domain_info(struct cmd_ds_command *resp);
-
-struct bss_descriptor;
-int lbs_parse_dnld_countryinfo_11d(struct lbs_private *priv,
-                                        struct bss_descriptor * bss);
-
-int lbs_create_dnld_countryinfo_11d(struct lbs_private *priv);
-
-#endif
diff --git a/drivers/net/wireless/libertas/Kconfig b/drivers/net/wireless/libertas/Kconfig
new file mode 100644
index 0000000..8f8d75b
--- /dev/null
+++ b/drivers/net/wireless/libertas/Kconfig
@@ -0,0 +1,39 @@
+config LIBERTAS
+	tristate "Marvell 8xxx Libertas WLAN driver support"
+	depends on WLAN_80211 && CFG80211
+	select WIRELESS_EXT
+	select WEXT_SPY
+	select LIB80211
+	select FW_LOADER
+	---help---
+	  A library for Marvell Libertas 8xxx devices.
+
+config LIBERTAS_USB
+	tristate "Marvell Libertas 8388 USB 802.11b/g cards"
+	depends on LIBERTAS && USB
+	---help---
+	  A driver for Marvell Libertas 8388 USB devices.
+
+config LIBERTAS_CS
+	tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
+	depends on LIBERTAS && PCMCIA
+	---help---
+	  A driver for Marvell Libertas 8385 CompactFlash devices.
+
+config LIBERTAS_SDIO
+	tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
+	depends on LIBERTAS && MMC
+	---help---
+	  A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
+
+config LIBERTAS_SPI
+	tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
+	depends on LIBERTAS && SPI
+	---help---
+	  A driver for Marvell Libertas 8686 SPI devices.
+
+config LIBERTAS_DEBUG
+	bool "Enable full debugging output in the Libertas module."
+	depends on LIBERTAS
+	---help---
+	  Debugging support.
diff --git a/drivers/net/wireless/libertas/Makefile b/drivers/net/wireless/libertas/Makefile
index 0b69185..fa37039 100644
--- a/drivers/net/wireless/libertas/Makefile
+++ b/drivers/net/wireless/libertas/Makefile
@@ -1,5 +1,15 @@
-libertas-objs := main.o wext.o rx.o tx.o cmd.o cmdresp.o scan.o 11d.o	\
-		 debugfs.o persistcfg.o ethtool.o assoc.o
+libertas-y += assoc.o
+libertas-y += cfg.o
+libertas-y += cmd.o
+libertas-y += cmdresp.o
+libertas-y += debugfs.o
+libertas-y += ethtool.o
+libertas-y += main.o
+libertas-y += persistcfg.o
+libertas-y += rx.o
+libertas-y += scan.o
+libertas-y += tx.o
+libertas-y += wext.o
 
 usb8xxx-objs += if_usb.o
 libertas_cs-objs += if_cs.o
diff --git a/drivers/net/wireless/libertas/README b/drivers/net/wireless/libertas/README
index ab6a2d5..2726c04 100644
--- a/drivers/net/wireless/libertas/README
+++ b/drivers/net/wireless/libertas/README
@@ -1,5 +1,5 @@
 ================================================================================
-			README for USB8388
+			README for Libertas
 
  (c) Copyright © 2003-2006, Marvell International Ltd.
  All Rights Reserved
@@ -226,4 +226,28 @@
     All entries in the scan table (not just the new scan data when keep=1)
     will be displayed upon completion by use of the getscantable ioctl.
 
+========================
+IWCONFIG COMMANDS
+========================
+power period
+
+	This command is used to configure the station in deep sleep mode /
+	auto deep sleep mode.
+
+	The timer is implemented to monitor the activities (command, event,
+	etc.). When an activity is detected station will exit from deep
+	sleep mode automatically and restart the timer. At timer expiry
+	(no activity for defined time period) the deep sleep mode is entered
+	automatically.
+
+	Note: this command is for SDIO interface only.
+
+	Usage:
+	To enable deep sleep mode do:
+		iwconfig wlan0 power period 0
+	To enable auto deep sleep mode with idle time period 5 seconds do:
+		iwconfig wlan0 power period 5
+	To disable deep sleep/auto deep sleep mode do:
+		iwconfig wlan0 power period -1
+
 ==============================================================================
diff --git a/drivers/net/wireless/libertas/assoc.c b/drivers/net/wireless/libertas/assoc.c
index dd87326..7510673 100644
--- a/drivers/net/wireless/libertas/assoc.c
+++ b/drivers/net/wireless/libertas/assoc.c
@@ -23,6 +23,13 @@
  */
 #define CAPINFO_MASK	(~(0xda00))
 
+/**
+ * 802.11b/g supported bitrates (in 500Kb/s units)
+ */
+u8 lbs_bg_rates[MAX_RATES] =
+    { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
+0x00, 0x00 };
+
 
 /**
  *  @brief This function finds common rates between rates and card rates.
@@ -147,6 +154,397 @@
 }
 
 
+int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
+			   struct assoc_request *assoc)
+{
+	struct cmd_ds_802_11_set_wep cmd;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP);
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	cmd.action = cpu_to_le16(cmd_action);
+
+	if (cmd_action == CMD_ACT_ADD) {
+		int i;
+
+		/* default tx key index */
+		cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx &
+					   CMD_WEP_KEY_INDEX_MASK);
+
+		/* Copy key types and material to host command structure */
+		for (i = 0; i < 4; i++) {
+			struct enc_key *pkey = &assoc->wep_keys[i];
+
+			switch (pkey->len) {
+			case KEY_LEN_WEP_40:
+				cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
+				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
+				lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i);
+				break;
+			case KEY_LEN_WEP_104:
+				cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
+				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
+				lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i);
+				break;
+			case 0:
+				break;
+			default:
+				lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n",
+					    i, pkey->len);
+				ret = -1;
+				goto done;
+				break;
+			}
+		}
+	} else if (cmd_action == CMD_ACT_REMOVE) {
+		/* ACT_REMOVE clears _all_ WEP keys */
+
+		/* default tx key index */
+		cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx &
+					   CMD_WEP_KEY_INDEX_MASK);
+		lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx);
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
+done:
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
+			      uint16_t *enable)
+{
+	struct cmd_ds_802_11_enable_rsn cmd;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	cmd.action = cpu_to_le16(cmd_action);
+
+	if (cmd_action == CMD_ACT_GET)
+		cmd.enable = 0;
+	else {
+		if (*enable)
+			cmd.enable = cpu_to_le16(CMD_ENABLE_RSN);
+		else
+			cmd.enable = cpu_to_le16(CMD_DISABLE_RSN);
+		lbs_deb_cmd("ENABLE_RSN: %d\n", *enable);
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
+	if (!ret && cmd_action == CMD_ACT_GET)
+		*enable = le16_to_cpu(cmd.enable);
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam,
+		struct enc_key *key)
+{
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (key->flags & KEY_INFO_WPA_ENABLED)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED);
+	if (key->flags & KEY_INFO_WPA_UNICAST)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST);
+	if (key->flags & KEY_INFO_WPA_MCAST)
+		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST);
+
+	keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
+	keyparam->keytypeid = cpu_to_le16(key->type);
+	keyparam->keylen = cpu_to_le16(key->len);
+	memcpy(keyparam->key, key->key, key->len);
+
+	/* Length field doesn't include the {type,length} header */
+	keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
+
+int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
+				struct assoc_request *assoc)
+{
+	struct cmd_ds_802_11_key_material cmd;
+	int ret = 0;
+	int index = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	cmd.action = cpu_to_le16(cmd_action);
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	if (cmd_action == CMD_ACT_GET) {
+		cmd.hdr.size = cpu_to_le16(sizeof(struct cmd_header) + 2);
+	} else {
+		memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet));
+
+		if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) {
+			set_one_wpa_key(&cmd.keyParamSet[index],
+					&assoc->wpa_unicast_key);
+			index++;
+		}
+
+		if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) {
+			set_one_wpa_key(&cmd.keyParamSet[index],
+					&assoc->wpa_mcast_key);
+			index++;
+		}
+
+		/* The common header and as many keys as we included */
+		cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd),
+						    keyParamSet[index]));
+	}
+	ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
+	/* Copy the returned key to driver private data */
+	if (!ret && cmd_action == CMD_ACT_GET) {
+		void *buf_ptr = cmd.keyParamSet;
+		void *resp_end = &(&cmd)[1];
+
+		while (buf_ptr < resp_end) {
+			struct MrvlIEtype_keyParamSet *keyparam = buf_ptr;
+			struct enc_key *key;
+			uint16_t param_set_len = le16_to_cpu(keyparam->length);
+			uint16_t key_len = le16_to_cpu(keyparam->keylen);
+			uint16_t key_flags = le16_to_cpu(keyparam->keyinfo);
+			uint16_t key_type = le16_to_cpu(keyparam->keytypeid);
+			void *end;
+
+			end = (void *)keyparam + sizeof(keyparam->type)
+				+ sizeof(keyparam->length) + param_set_len;
+
+			/* Make sure we don't access past the end of the IEs */
+			if (end > resp_end)
+				break;
+
+			if (key_flags & KEY_INFO_WPA_UNICAST)
+				key = &priv->wpa_unicast_key;
+			else if (key_flags & KEY_INFO_WPA_MCAST)
+				key = &priv->wpa_mcast_key;
+			else
+				break;
+
+			/* Copy returned key into driver */
+			memset(key, 0, sizeof(struct enc_key));
+			if (key_len > sizeof(key->key))
+				break;
+			key->type = key_type;
+			key->flags = key_flags;
+			key->len = key_len;
+			memcpy(key->key, keyparam->key, key->len);
+
+			buf_ptr = end + 1;
+		}
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok)
+{
+/*		Bit  	Rate
+*		15:13 Reserved
+*		12    54 Mbps
+*		11    48 Mbps
+*		10    36 Mbps
+*		9     24 Mbps
+*		8     18 Mbps
+*		7     12 Mbps
+*		6     9 Mbps
+*		5     6 Mbps
+*		4     Reserved
+*		3     11 Mbps
+*		2     5.5 Mbps
+*		1     2 Mbps
+*		0     1 Mbps
+**/
+
+	uint16_t ratemask;
+	int i = lbs_data_rate_to_fw_index(rate);
+	if (lower_rates_ok)
+		ratemask = (0x1fef >> (12 - i));
+	else
+		ratemask = (1 << i);
+	return cpu_to_le16(ratemask);
+}
+
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action)
+{
+	struct cmd_ds_802_11_rate_adapt_rateset cmd;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (!priv->cur_rate && !priv->enablehwauto)
+		return -EINVAL;
+
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	cmd.action = cpu_to_le16(cmd_action);
+	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
+	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
+	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
+	if (!ret && cmd_action == CMD_ACT_GET) {
+		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
+		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
+	}
+
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+/**
+ *  @brief Set the data rate
+ *
+ *  @param priv    	A pointer to struct lbs_private structure
+ *  @param rate  	The desired data rate, or 0 to clear a locked rate
+ *
+ *  @return 	   	0 on success, error on failure
+ */
+int lbs_set_data_rate(struct lbs_private *priv, u8 rate)
+{
+	struct cmd_ds_802_11_data_rate cmd;
+	int ret = 0;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	memset(&cmd, 0, sizeof(cmd));
+	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+
+	if (rate > 0) {
+		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE);
+		cmd.rates[0] = lbs_data_rate_to_fw_index(rate);
+		if (cmd.rates[0] == 0) {
+			lbs_deb_cmd("DATA_RATE: invalid requested rate of"
+				" 0x%02X\n", rate);
+			ret = 0;
+			goto out;
+		}
+		lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]);
+	} else {
+		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO);
+		lbs_deb_cmd("DATA_RATE: setting auto\n");
+	}
+
+	ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd);
+	if (ret)
+		goto out;
+
+	lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof(cmd));
+
+	/* FIXME: get actual rates FW can do if this command actually returns
+	 * all data rates supported.
+	 */
+	priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]);
+	lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate);
+
+out:
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
+
+
+int lbs_cmd_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *cmd)
+{
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	cmd->command = cpu_to_le16(CMD_802_11_RSSI);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) +
+		sizeof(struct cmd_header));
+	cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR);
+
+	/* reset Beacon SNR/NF/RSSI values */
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = 0;
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->NF[TYPE_BEACON][TYPE_AVG] = 0;
+	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0;
+	priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0;
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_ret_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *resp)
+{
+	struct cmd_ds_802_11_rssi_rsp *rssirsp = &resp->params.rssirsp;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	/* store the non average value */
+	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
+	priv->NF[TYPE_BEACON][TYPE_NOAVG] =
+		get_unaligned_le16(&rssirsp->noisefloor);
+
+	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
+	priv->NF[TYPE_BEACON][TYPE_AVG] =
+		get_unaligned_le16(&rssirsp->avgnoisefloor);
+
+	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
+	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
+		     priv->NF[TYPE_BEACON][TYPE_NOAVG]);
+
+	priv->RSSI[TYPE_BEACON][TYPE_AVG] =
+	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_AVG] / AVG_SCALE,
+		     priv->NF[TYPE_BEACON][TYPE_AVG] / AVG_SCALE);
+
+	lbs_deb_cmd("RSSI: beacon %d, avg %d\n",
+	       priv->RSSI[TYPE_BEACON][TYPE_NOAVG],
+	       priv->RSSI[TYPE_BEACON][TYPE_AVG]);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+
+int lbs_cmd_bcn_ctrl(struct lbs_private *priv,
+				struct cmd_ds_command *cmd,
+				u16 cmd_action)
+{
+	struct cmd_ds_802_11_beacon_control
+		*bcn_ctrl = &cmd->params.bcn_ctrl;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	cmd->size =
+	    cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control)
+			     + sizeof(struct cmd_header));
+	cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL);
+
+	bcn_ctrl->action = cpu_to_le16(cmd_action);
+	bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable);
+	bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period);
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return 0;
+}
+
+int lbs_ret_802_11_bcn_ctrl(struct lbs_private *priv,
+					struct cmd_ds_command *resp)
+{
+	struct cmd_ds_802_11_beacon_control *bcn_ctrl =
+	    &resp->params.bcn_ctrl;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (bcn_ctrl->action == CMD_ACT_GET) {
+		priv->beacon_enable = (u8) le16_to_cpu(bcn_ctrl->beacon_enable);
+		priv->beacon_period = le16_to_cpu(bcn_ctrl->beacon_period);
+	}
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	return 0;
+}
+
+
+
 static int lbs_assoc_post(struct lbs_private *priv,
 			  struct cmd_ds_802_11_associate_response *resp)
 {
@@ -226,7 +624,7 @@
 	priv->connect_status = LBS_CONNECTED;
 
 	/* Update current SSID and BSSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = bss->ssid_len;
 	memcpy(priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
 
@@ -369,12 +767,7 @@
 				   (u16)(pos - (u8 *) &cmd.iebuf));
 
 	/* update curbssparams */
-	priv->curbssparams.channel = bss->phy.ds.channel;
-
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto done;
-	}
+	priv->channel = bss->phy.ds.channel;
 
 	ret = lbs_cmd_with_response(priv, command, &cmd);
 	if (ret == 0) {
@@ -472,7 +865,7 @@
 	memcpy(&priv->curbssparams.bssid, bss->bssid, ETH_ALEN);
 
 	/* Set the new SSID to current SSID */
-	memcpy(&priv->curbssparams.ssid, &bss->ssid, IW_ESSID_MAX_SIZE);
+	memcpy(&priv->curbssparams.ssid, &bss->ssid, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = bss->ssid_len;
 
 	netif_carrier_on(priv->dev);
@@ -487,7 +880,7 @@
 	lbs_deb_join("ADHOC_RESP: Joined/started '%s', BSSID %pM, channel %d\n",
 		     print_ssid(ssid, bss->ssid, bss->ssid_len),
 		     priv->curbssparams.bssid,
-		     priv->curbssparams.channel);
+		     priv->channel);
 
 done:
 	lbs_deb_leave_args(LBS_DEB_JOIN, "ret %d", ret);
@@ -560,7 +953,7 @@
 	lbs_deb_join("AdhocJoin: band = %c\n", assoc_req->band);
 
 	priv->adhoccreate = 0;
-	priv->curbssparams.channel = bss->channel;
+	priv->channel = bss->channel;
 
 	/* Build the join command */
 	memset(&cmd, 0, sizeof(cmd));
@@ -633,11 +1026,6 @@
 		}
 	}
 
-	if (lbs_parse_dnld_countryinfo_11d(priv, bss)) {
-		ret = -1;
-		goto out;
-	}
-
 	ret = lbs_cmd_with_response(priv, CMD_802_11_AD_HOC_JOIN, &cmd);
 	if (ret == 0) {
 		ret = lbs_adhoc_post(priv,
@@ -737,12 +1125,6 @@
 	lbs_deb_join("ADHOC_START: rates=%02x %02x %02x %02x\n",
 	       cmd.rates[0], cmd.rates[1], cmd.rates[2], cmd.rates[3]);
 
-	if (lbs_create_dnld_countryinfo_11d(priv)) {
-		lbs_deb_join("ADHOC_START: dnld_countryinfo_11d failed\n");
-		ret = -1;
-		goto out;
-	}
-
 	lbs_deb_join("ADHOC_START: Starting Ad-Hoc BSS on channel %d, band %d\n",
 		     assoc_req->channel, assoc_req->band);
 
@@ -1099,7 +1481,7 @@
 			/* else send START command */
 			lbs_deb_assoc("SSID not found, creating adhoc network\n");
 			memcpy(&assoc_req->bss.ssid, &assoc_req->ssid,
-				IW_ESSID_MAX_SIZE);
+				IEEE80211_MAX_SSID_LEN);
 			assoc_req->bss.ssid_len = assoc_req->ssid_len;
 			lbs_adhoc_start(priv, assoc_req);
 		}
@@ -1185,7 +1567,8 @@
 	}
 
 	priv->mode = assoc_req->mode;
-	ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE, assoc_req->mode);
+	ret = lbs_set_snmp_mib(priv, SNMP_MIB_OID_BSS_TYPE,
+		assoc_req->mode == IW_MODE_ADHOC ? 2 : 1);
 
 done:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -1205,7 +1588,7 @@
 		goto done;
 	}
 
-	if (assoc_req->channel == priv->curbssparams.channel)
+	if (assoc_req->channel == priv->channel)
 		goto done;
 
 	if (priv->mesh_dev) {
@@ -1217,7 +1600,7 @@
 	}
 
 	lbs_deb_assoc("ASSOC: channel: %d -> %d\n",
-		      priv->curbssparams.channel, assoc_req->channel);
+		      priv->channel, assoc_req->channel);
 
 	ret = lbs_set_channel(priv, assoc_req->channel);
 	if (ret < 0)
@@ -1232,7 +1615,7 @@
 		goto done;
 	}
 
-	if (assoc_req->channel != priv->curbssparams.channel) {
+	if (assoc_req->channel != priv->channel) {
 		lbs_deb_assoc("ASSOC: channel: failed to update channel to %d\n",
 		              assoc_req->channel);
 		goto restore_mesh;
@@ -1253,7 +1636,7 @@
  restore_mesh:
 	if (priv->mesh_dev)
 		lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				priv->curbssparams.channel);
+				priv->channel);
 
  done:
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -1475,7 +1858,7 @@
 	}
 
 	if (test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags)) {
-		if (assoc_req->channel != priv->curbssparams.channel)
+		if (assoc_req->channel != priv->channel)
 			return 1;
 	}
 
@@ -1557,7 +1940,7 @@
 
 	found = lbs_find_best_ssid_in_list(priv, preferred_mode);
 	if (found && (found->ssid_len > 0)) {
-		memcpy(out_ssid, &found->ssid, IW_ESSID_MAX_SIZE);
+		memcpy(out_ssid, &found->ssid, IEEE80211_MAX_SSID_LEN);
 		*out_ssid_len = found->ssid_len;
 		*out_mode = found->mode;
 		ret = 0;
@@ -1775,12 +2158,12 @@
 	assoc_req = priv->pending_assoc_req;
 	if (!test_bit(ASSOC_FLAG_SSID, &assoc_req->flags)) {
 		memcpy(&assoc_req->ssid, &priv->curbssparams.ssid,
-		       IW_ESSID_MAX_SIZE);
+		       IEEE80211_MAX_SSID_LEN);
 		assoc_req->ssid_len = priv->curbssparams.ssid_len;
 	}
 
 	if (!test_bit(ASSOC_FLAG_CHANNEL, &assoc_req->flags))
-		assoc_req->channel = priv->curbssparams.channel;
+		assoc_req->channel = priv->channel;
 
 	if (!test_bit(ASSOC_FLAG_BAND, &assoc_req->flags))
 		assoc_req->band = priv->curbssparams.band;
diff --git a/drivers/net/wireless/libertas/assoc.h b/drivers/net/wireless/libertas/assoc.h
index 6e765e9..40621b7 100644
--- a/drivers/net/wireless/libertas/assoc.h
+++ b/drivers/net/wireless/libertas/assoc.h
@@ -3,7 +3,126 @@
 #ifndef _LBS_ASSOC_H_
 #define _LBS_ASSOC_H_
 
-#include "dev.h"
+
+#include "defs.h"
+#include "host.h"
+
+
+struct lbs_private;
+
+/*
+ * In theory, the IE is limited to the IE length, 255,
+ * but in practice 64 bytes are enough.
+ */
+#define MAX_WPA_IE_LEN 64
+
+
+
+struct lbs_802_11_security {
+	u8 WPAenabled;
+	u8 WPA2enabled;
+	u8 wep_enabled;
+	u8 auth_mode;
+	u32 key_mgmt;
+};
+
+/** Current Basic Service Set State Structure */
+struct current_bss_params {
+	/** bssid */
+	u8 bssid[ETH_ALEN];
+	/** ssid */
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+
+	/** band */
+	u8 band;
+	/** channel is directly in priv->channel */
+	/** zero-terminated array of supported data rates */
+	u8 rates[MAX_RATES + 1];
+};
+
+/**
+ *  @brief Structure used to store information for each beacon/probe response
+ */
+struct bss_descriptor {
+	u8 bssid[ETH_ALEN];
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+
+	u16 capability;
+	u32 rssi;
+	u32 channel;
+	u16 beaconperiod;
+	__le16 atimwindow;
+
+	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
+	u8 mode;
+
+	/* zero-terminated array of supported data rates */
+	u8 rates[MAX_RATES + 1];
+
+	unsigned long last_scanned;
+
+	union ieee_phy_param_set phy;
+	union ieee_ss_param_set ss;
+
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	size_t wpa_ie_len;
+	u8 rsn_ie[MAX_WPA_IE_LEN];
+	size_t rsn_ie_len;
+
+	u8 mesh;
+
+	struct list_head list;
+};
+
+/** Association request
+ *
+ * Encapsulates all the options that describe a specific assocation request
+ * or configuration of the wireless card's radio, mode, and security settings.
+ */
+struct assoc_request {
+#define ASSOC_FLAG_SSID			1
+#define ASSOC_FLAG_CHANNEL		2
+#define ASSOC_FLAG_BAND			3
+#define ASSOC_FLAG_MODE			4
+#define ASSOC_FLAG_BSSID		5
+#define ASSOC_FLAG_WEP_KEYS		6
+#define ASSOC_FLAG_WEP_TX_KEYIDX	7
+#define ASSOC_FLAG_WPA_MCAST_KEY	8
+#define ASSOC_FLAG_WPA_UCAST_KEY	9
+#define ASSOC_FLAG_SECINFO		10
+#define ASSOC_FLAG_WPA_IE		11
+	unsigned long flags;
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 ssid_len;
+	u8 channel;
+	u8 band;
+	u8 mode;
+	u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
+
+	/** WEP keys */
+	struct enc_key wep_keys[4];
+	u16 wep_tx_keyidx;
+
+	/** WPA keys */
+	struct enc_key wpa_mcast_key;
+	struct enc_key wpa_unicast_key;
+
+	struct lbs_802_11_security secinfo;
+
+	/** WPA Information Elements*/
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	u8 wpa_ie_len;
+
+	/* BSS to associate with for infrastructure of Ad-Hoc join */
+	struct bss_descriptor bss;
+};
+
+
+extern u8 lbs_bg_rates[MAX_RATES];
 
 void lbs_association_worker(struct work_struct *work);
 struct assoc_request *lbs_get_association_request(struct lbs_private *priv);
@@ -13,4 +132,24 @@
 int lbs_cmd_80211_deauthenticate(struct lbs_private *priv,
 				 u8 bssid[ETH_ALEN], u16 reason);
 
+int lbs_cmd_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *cmd);
+int lbs_ret_802_11_rssi(struct lbs_private *priv,
+				struct cmd_ds_command *resp);
+
+int lbs_cmd_bcn_ctrl(struct lbs_private *priv,
+				struct cmd_ds_command *cmd,
+				u16 cmd_action);
+int lbs_ret_802_11_bcn_ctrl(struct lbs_private *priv,
+					struct cmd_ds_command *resp);
+
+int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
+			   struct assoc_request *assoc);
+
+int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
+			      uint16_t *enable);
+
+int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
+				struct assoc_request *assoc);
+
 #endif /* _LBS_ASSOC_H */
diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c
new file mode 100644
index 0000000..4396dcc
--- /dev/null
+++ b/drivers/net/wireless/libertas/cfg.c
@@ -0,0 +1,198 @@
+/*
+ * Implement cfg80211 ("iw") support.
+ *
+ * Copyright (C) 2009 M&N Solutions GmbH, 61191 Rosbach, Germany
+ * Holger Schurig <hs4233@mail.mn-solutions.de>
+ *
+ */
+
+#include <net/cfg80211.h>
+
+#include "cfg.h"
+#include "cmd.h"
+
+
+#define CHAN2G(_channel, _freq, _flags) {        \
+	.band             = IEEE80211_BAND_2GHZ, \
+	.center_freq      = (_freq),             \
+	.hw_value         = (_channel),          \
+	.flags            = (_flags),            \
+	.max_antenna_gain = 0,                   \
+	.max_power        = 30,                  \
+}
+
+static struct ieee80211_channel lbs_2ghz_channels[] = {
+	CHAN2G(1,  2412, 0),
+	CHAN2G(2,  2417, 0),
+	CHAN2G(3,  2422, 0),
+	CHAN2G(4,  2427, 0),
+	CHAN2G(5,  2432, 0),
+	CHAN2G(6,  2437, 0),
+	CHAN2G(7,  2442, 0),
+	CHAN2G(8,  2447, 0),
+	CHAN2G(9,  2452, 0),
+	CHAN2G(10, 2457, 0),
+	CHAN2G(11, 2462, 0),
+	CHAN2G(12, 2467, 0),
+	CHAN2G(13, 2472, 0),
+	CHAN2G(14, 2484, 0),
+};
+
+#define RATETAB_ENT(_rate, _rateid, _flags) { \
+	.bitrate  = (_rate),                  \
+	.hw_value = (_rateid),                \
+	.flags    = (_flags),                 \
+}
+
+
+static struct ieee80211_rate lbs_rates[] = {
+	RATETAB_ENT(10,  0x1,   0),
+	RATETAB_ENT(20,  0x2,   0),
+	RATETAB_ENT(55,  0x4,   0),
+	RATETAB_ENT(110, 0x8,   0),
+	RATETAB_ENT(60,  0x10,  0),
+	RATETAB_ENT(90,  0x20,  0),
+	RATETAB_ENT(120, 0x40,  0),
+	RATETAB_ENT(180, 0x80,  0),
+	RATETAB_ENT(240, 0x100, 0),
+	RATETAB_ENT(360, 0x200, 0),
+	RATETAB_ENT(480, 0x400, 0),
+	RATETAB_ENT(540, 0x800, 0),
+};
+
+static struct ieee80211_supported_band lbs_band_2ghz = {
+	.channels = lbs_2ghz_channels,
+	.n_channels = ARRAY_SIZE(lbs_2ghz_channels),
+	.bitrates = lbs_rates,
+	.n_bitrates = ARRAY_SIZE(lbs_rates),
+};
+
+
+static const u32 cipher_suites[] = {
+	WLAN_CIPHER_SUITE_WEP40,
+	WLAN_CIPHER_SUITE_WEP104,
+	WLAN_CIPHER_SUITE_TKIP,
+	WLAN_CIPHER_SUITE_CCMP,
+};
+
+
+
+static int lbs_cfg_set_channel(struct wiphy *wiphy,
+	struct ieee80211_channel *chan,
+	enum nl80211_channel_type channel_type)
+{
+	struct lbs_private *priv = wiphy_priv(wiphy);
+	int ret = -ENOTSUPP;
+
+	lbs_deb_enter_args(LBS_DEB_CFG80211, "freq %d, type %d", chan->center_freq, channel_type);
+
+	if (channel_type != NL80211_CHAN_NO_HT)
+		goto out;
+
+	ret = lbs_set_channel(priv, chan->hw_value);
+
+ out:
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ret;
+}
+
+
+
+
+static struct cfg80211_ops lbs_cfg80211_ops = {
+	.set_channel = lbs_cfg_set_channel,
+};
+
+
+/*
+ * At this time lbs_private *priv doesn't even exist, so we just allocate
+ * memory and don't initialize the wiphy further. This is postponed until we
+ * can talk to the firmware and happens at registration time in
+ * lbs_cfg_wiphy_register().
+ */
+struct wireless_dev *lbs_cfg_alloc(struct device *dev)
+{
+	int ret = 0;
+	struct wireless_dev *wdev;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	wdev = kzalloc(sizeof(struct wireless_dev), GFP_KERNEL);
+	if (!wdev) {
+		dev_err(dev, "cannot allocate wireless device\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	wdev->wiphy = wiphy_new(&lbs_cfg80211_ops, sizeof(struct lbs_private));
+	if (!wdev->wiphy) {
+		dev_err(dev, "cannot allocate wiphy\n");
+		ret = -ENOMEM;
+		goto err_wiphy_new;
+	}
+
+	lbs_deb_leave(LBS_DEB_CFG80211);
+	return wdev;
+
+ err_wiphy_new:
+	kfree(wdev);
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ERR_PTR(ret);
+}
+
+
+/*
+ * This function get's called after lbs_setup_firmware() determined the
+ * firmware capabities. So we can setup the wiphy according to our
+ * hardware/firmware.
+ */
+int lbs_cfg_register(struct lbs_private *priv)
+{
+	struct wireless_dev *wdev = priv->wdev;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	wdev->wiphy->max_scan_ssids = 1;
+	wdev->wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
+
+	/* TODO: BIT(NL80211_IFTYPE_ADHOC); */
+	wdev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+
+	/* TODO: honor priv->regioncode */
+	wdev->wiphy->bands[IEEE80211_BAND_2GHZ] = &lbs_band_2ghz;
+
+	/*
+	 * We could check priv->fwcapinfo && FW_CAPINFO_WPA, but I have
+	 * never seen a firmware without WPA
+	 */
+	wdev->wiphy->cipher_suites = cipher_suites;
+	wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
+
+	ret = wiphy_register(wdev->wiphy);
+	if (ret < 0)
+		lbs_pr_err("cannot register wiphy device\n");
+
+	ret = register_netdev(priv->dev);
+	if (ret)
+		lbs_pr_err("cannot register network device\n");
+
+	lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret);
+	return ret;
+}
+
+
+void lbs_cfg_free(struct lbs_private *priv)
+{
+	struct wireless_dev *wdev = priv->wdev;
+
+	lbs_deb_enter(LBS_DEB_CFG80211);
+
+	if (!wdev)
+		return;
+
+	if (wdev->wiphy) {
+		wiphy_unregister(wdev->wiphy);
+		wiphy_free(wdev->wiphy);
+	}
+	kfree(wdev);
+}
diff --git a/drivers/net/wireless/libertas/cfg.h b/drivers/net/wireless/libertas/cfg.h
new file mode 100644
index 0000000..e09a193
--- /dev/null
+++ b/drivers/net/wireless/libertas/cfg.h
@@ -0,0 +1,16 @@
+#ifndef __LBS_CFG80211_H__
+#define __LBS_CFG80211_H__
+
+#include "dev.h"
+
+struct wireless_dev *lbs_cfg_alloc(struct device *dev);
+int lbs_cfg_register(struct lbs_private *priv);
+void lbs_cfg_free(struct lbs_private *priv);
+
+int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
+	u8 ssid_len);
+int lbs_scan_networks(struct lbs_private *priv, int full_scan);
+void lbs_cfg_scan_worker(struct work_struct *work);
+
+
+#endif
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6850981..1065ce2 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -3,20 +3,21 @@
   * It prepares command and sends it to firmware when it is ready.
   */
 
-#include <net/iw_handler.h>
 #include <net/lib80211.h>
 #include <linux/kfifo.h>
+#include <linux/sched.h>
+
 #include "host.h"
-#include "hostcmd.h"
 #include "decl.h"
 #include "defs.h"
 #include "dev.h"
 #include "assoc.h"
 #include "wext.h"
+#include "scan.h"
 #include "cmd.h"
 
-static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
 
+static struct cmd_ctrl_node *lbs_get_cmd_ctrl_node(struct lbs_private *priv);
 
 /**
  *  @brief Simple callback that copies response back into command
@@ -76,6 +77,30 @@
 }
 
 /**
+ *  @brief This function checks if the command is allowed.
+ *
+ *  @param priv         A pointer to lbs_private structure
+ *  @return             allowed or not allowed.
+ */
+
+static int lbs_is_cmd_allowed(struct lbs_private *priv)
+{
+	int ret = 1;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (!priv->is_auto_deep_sleep_enabled) {
+		if (priv->is_deep_sleep) {
+			lbs_deb_cmd("command not allowed in deep sleep\n");
+			ret = 0;
+		}
+	}
+
+	lbs_deb_leave(LBS_DEB_CMD);
+	return ret;
+}
+
+/**
  *  @brief Updates the hardware details like MAC address and regulatory region
  *
  *  @param priv    	A pointer to struct lbs_private structure
@@ -168,11 +193,6 @@
 		goto out;
 	}
 
-	if (lbs_set_universaltable(priv, 0)) {
-		ret = -1;
-		goto out;
-	}
-
 out:
 	lbs_deb_leave(LBS_DEB_CMD);
 	return ret;
@@ -221,7 +241,7 @@
 
 	cmd->command = cpu_to_le16(CMD_802_11_PS_MODE);
 	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_ps_mode) +
-				S_DS_GEN);
+				sizeof(struct cmd_header));
 	psm->action = cpu_to_le16(cmd_action);
 	psm->multipledtim = 0;
 	switch (cmd_action) {
@@ -250,33 +270,6 @@
 	return 0;
 }
 
-int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv,
-				      uint16_t cmd_action, uint16_t *timeout)
-{
-	struct cmd_ds_802_11_inactivity_timeout cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.hdr.command = cpu_to_le16(CMD_802_11_INACTIVITY_TIMEOUT);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	cmd.action = cpu_to_le16(cmd_action);
-
-	if (cmd_action == CMD_ACT_SET)
-		cmd.timeout = cpu_to_le16(*timeout);
-	else
-		cmd.timeout = 0;
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_INACTIVITY_TIMEOUT, &cmd);
-
-	if (!ret)
-		*timeout = le16_to_cpu(cmd.timeout);
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return 0;
-}
-
 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,
 				struct sleep_params *sp)
 {
@@ -319,190 +312,53 @@
 	return 0;
 }
 
-int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
-			   struct assoc_request *assoc)
+static int lbs_wait_for_ds_awake(struct lbs_private *priv)
 {
-	struct cmd_ds_802_11_set_wep cmd;
 	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_CMD);
 
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.hdr.command = cpu_to_le16(CMD_802_11_SET_WEP);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
+	if (priv->is_deep_sleep) {
+		if (!wait_event_interruptible_timeout(priv->ds_awake_q,
+					!priv->is_deep_sleep, (10 * HZ))) {
+			lbs_pr_err("ds_awake_q: timer expired\n");
+			ret = -1;
+		}
+	}
 
-	cmd.action = cpu_to_le16(cmd_action);
+	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
+	return ret;
+}
 
-	if (cmd_action == CMD_ACT_ADD) {
-		int i;
+int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep)
+{
+	int ret =  0;
 
-		/* default tx key index */
-		cmd.keyindex = cpu_to_le16(assoc->wep_tx_keyidx &
-					   CMD_WEP_KEY_INDEX_MASK);
+	lbs_deb_enter(LBS_DEB_CMD);
 
-		/* Copy key types and material to host command structure */
-		for (i = 0; i < 4; i++) {
-			struct enc_key *pkey = &assoc->wep_keys[i];
-
-			switch (pkey->len) {
-			case KEY_LEN_WEP_40:
-				cmd.keytype[i] = CMD_TYPE_WEP_40_BIT;
-				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
-				lbs_deb_cmd("SET_WEP: add key %d (40 bit)\n", i);
-				break;
-			case KEY_LEN_WEP_104:
-				cmd.keytype[i] = CMD_TYPE_WEP_104_BIT;
-				memmove(cmd.keymaterial[i], pkey->key, pkey->len);
-				lbs_deb_cmd("SET_WEP: add key %d (104 bit)\n", i);
-				break;
-			case 0:
-				break;
-			default:
-				lbs_deb_cmd("SET_WEP: invalid key %d, length %d\n",
-					    i, pkey->len);
-				ret = -1;
-				goto done;
-				break;
+	if (deep_sleep) {
+		if (priv->is_deep_sleep != 1) {
+			lbs_deb_cmd("deep sleep: sleep\n");
+			BUG_ON(!priv->enter_deep_sleep);
+			ret = priv->enter_deep_sleep(priv);
+			if (!ret) {
+				netif_stop_queue(priv->dev);
+				netif_carrier_off(priv->dev);
 			}
+		} else {
+			lbs_pr_err("deep sleep: already enabled\n");
 		}
-	} else if (cmd_action == CMD_ACT_REMOVE) {
-		/* ACT_REMOVE clears _all_ WEP keys */
-
-		/* default tx key index */
-		cmd.keyindex = cpu_to_le16(priv->wep_tx_keyidx &
-					   CMD_WEP_KEY_INDEX_MASK);
-		lbs_deb_cmd("SET_WEP: remove key %d\n", priv->wep_tx_keyidx);
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_SET_WEP, &cmd);
-done:
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
-int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
-			      uint16_t *enable)
-{
-	struct cmd_ds_802_11_enable_rsn cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-	cmd.action = cpu_to_le16(cmd_action);
-
-	if (cmd_action == CMD_ACT_GET)
-		cmd.enable = 0;
-	else {
-		if (*enable)
-			cmd.enable = cpu_to_le16(CMD_ENABLE_RSN);
-		else
-			cmd.enable = cpu_to_le16(CMD_DISABLE_RSN);
-		lbs_deb_cmd("ENABLE_RSN: %d\n", *enable);
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_ENABLE_RSN, &cmd);
-	if (!ret && cmd_action == CMD_ACT_GET)
-		*enable = le16_to_cpu(cmd.enable);
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
-static void set_one_wpa_key(struct MrvlIEtype_keyParamSet *keyparam,
-                            struct enc_key *key)
-{
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (key->flags & KEY_INFO_WPA_ENABLED)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_ENABLED);
-	if (key->flags & KEY_INFO_WPA_UNICAST)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_UNICAST);
-	if (key->flags & KEY_INFO_WPA_MCAST)
-		keyparam->keyinfo |= cpu_to_le16(KEY_INFO_WPA_MCAST);
-
-	keyparam->type = cpu_to_le16(TLV_TYPE_KEY_MATERIAL);
-	keyparam->keytypeid = cpu_to_le16(key->type);
-	keyparam->keylen = cpu_to_le16(key->len);
-	memcpy(keyparam->key, key->key, key->len);
-
-	/* Length field doesn't include the {type,length} header */
-	keyparam->length = cpu_to_le16(sizeof(*keyparam) - 4);
-	lbs_deb_leave(LBS_DEB_CMD);
-}
-
-int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
-				struct assoc_request *assoc)
-{
-	struct cmd_ds_802_11_key_material cmd;
-	int ret = 0;
-	int index = 0;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	cmd.action = cpu_to_le16(cmd_action);
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	if (cmd_action == CMD_ACT_GET) {
-		cmd.hdr.size = cpu_to_le16(S_DS_GEN + 2);
 	} else {
-		memset(cmd.keyParamSet, 0, sizeof(cmd.keyParamSet));
-
-		if (test_bit(ASSOC_FLAG_WPA_UCAST_KEY, &assoc->flags)) {
-			set_one_wpa_key(&cmd.keyParamSet[index],
-					&assoc->wpa_unicast_key);
-			index++;
-		}
-
-		if (test_bit(ASSOC_FLAG_WPA_MCAST_KEY, &assoc->flags)) {
-			set_one_wpa_key(&cmd.keyParamSet[index],
-					&assoc->wpa_mcast_key);
-			index++;
-		}
-
-		/* The common header and as many keys as we included */
-		cmd.hdr.size = cpu_to_le16(offsetof(typeof(cmd),
-						    keyParamSet[index]));
-	}
-	ret = lbs_cmd_with_response(priv, CMD_802_11_KEY_MATERIAL, &cmd);
-	/* Copy the returned key to driver private data */
-	if (!ret && cmd_action == CMD_ACT_GET) {
-		void *buf_ptr = cmd.keyParamSet;
-		void *resp_end = &(&cmd)[1];
-
-		while (buf_ptr < resp_end) {
-			struct MrvlIEtype_keyParamSet *keyparam = buf_ptr;
-			struct enc_key *key;
-			uint16_t param_set_len = le16_to_cpu(keyparam->length);
-			uint16_t key_len = le16_to_cpu(keyparam->keylen);
-			uint16_t key_flags = le16_to_cpu(keyparam->keyinfo);
-			uint16_t key_type = le16_to_cpu(keyparam->keytypeid);
-			void *end;
-
-			end = (void *)keyparam + sizeof(keyparam->type)
-				+ sizeof(keyparam->length) + param_set_len;
-
-			/* Make sure we don't access past the end of the IEs */
-			if (end > resp_end)
-				break;
-
-			if (key_flags & KEY_INFO_WPA_UNICAST)
-				key = &priv->wpa_unicast_key;
-			else if (key_flags & KEY_INFO_WPA_MCAST)
-				key = &priv->wpa_mcast_key;
-			else
-				break;
-
-			/* Copy returned key into driver */
-			memset(key, 0, sizeof(struct enc_key));
-			if (key_len > sizeof(key->key))
-				break;
-			key->type = key_type;
-			key->flags = key_flags;
-			key->len = key_len;
-			memcpy(key->key, keyparam->key, key->len);
-
-			buf_ptr = end + 1;
+		if (priv->is_deep_sleep) {
+			lbs_deb_cmd("deep sleep: wakeup\n");
+			BUG_ON(!priv->exit_deep_sleep);
+			ret = priv->exit_deep_sleep(priv);
+			if (!ret) {
+				ret = lbs_wait_for_ds_awake(priv);
+				if (ret)
+					lbs_pr_err("deep sleep: wakeup"
+							"failed\n");
+			}
 		}
 	}
 
@@ -534,7 +390,7 @@
 	switch (oid) {
 	case SNMP_MIB_OID_BSS_TYPE:
 		cmd.bufsize = cpu_to_le16(sizeof(u8));
-		cmd.value[0] = (val == IW_MODE_ADHOC) ? 2 : 1;
+		cmd.value[0] = val;
 		break;
 	case SNMP_MIB_OID_11D_ENABLE:
 	case SNMP_MIB_OID_FRAG_THRESHOLD:
@@ -587,13 +443,7 @@
 
 	switch (le16_to_cpu(cmd.bufsize)) {
 	case sizeof(u8):
-		if (oid == SNMP_MIB_OID_BSS_TYPE) {
-			if (cmd.value[0] == 2)
-				*out_val = IW_MODE_ADHOC;
-			else
-				*out_val = IW_MODE_INFRA;
-		} else
-			*out_val = cmd.value[0];
+		*out_val = cmd.value[0];
 		break;
 	case sizeof(u16):
 		*out_val = le16_to_cpu(*((__le16 *)(&cmd.value)));
@@ -680,7 +530,7 @@
 	cmd->command = cpu_to_le16(CMD_802_11_MONITOR_MODE);
 	cmd->size =
 	    cpu_to_le16(sizeof(struct cmd_ds_802_11_monitor_mode) +
-			     S_DS_GEN);
+			     sizeof(struct cmd_header));
 
 	monitor->action = cpu_to_le16(cmd_action);
 	if (cmd_action == CMD_ACT_SET) {
@@ -691,111 +541,6 @@
 	return 0;
 }
 
-static __le16 lbs_rate_to_fw_bitmap(int rate, int lower_rates_ok)
-{
-/*		Bit  	Rate
-*		15:13 Reserved
-*		12    54 Mbps
-*		11    48 Mbps
-*		10    36 Mbps
-*		9     24 Mbps
-*		8     18 Mbps
-*		7     12 Mbps
-*		6     9 Mbps
-*		5     6 Mbps
-*		4     Reserved
-*		3     11 Mbps
-*		2     5.5 Mbps
-*		1     2 Mbps
-*		0     1 Mbps
-**/
-
-	uint16_t ratemask;
-	int i = lbs_data_rate_to_fw_index(rate);
-	if (lower_rates_ok)
-		ratemask = (0x1fef >> (12 - i));
-	else
-		ratemask = (1 << i);
-	return cpu_to_le16(ratemask);
-}
-
-int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
-				      uint16_t cmd_action)
-{
-	struct cmd_ds_802_11_rate_adapt_rateset cmd;
-	int ret;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (!priv->cur_rate && !priv->enablehwauto)
-		return -EINVAL;
-
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	cmd.action = cpu_to_le16(cmd_action);
-	cmd.enablehwauto = cpu_to_le16(priv->enablehwauto);
-	cmd.bitmap = lbs_rate_to_fw_bitmap(priv->cur_rate, priv->enablehwauto);
-	ret = lbs_cmd_with_response(priv, CMD_802_11_RATE_ADAPT_RATESET, &cmd);
-	if (!ret && cmd_action == CMD_ACT_GET) {
-		priv->ratebitmap = le16_to_cpu(cmd.bitmap);
-		priv->enablehwauto = le16_to_cpu(cmd.enablehwauto);
-	}
-
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-EXPORT_SYMBOL_GPL(lbs_cmd_802_11_rate_adapt_rateset);
-
-/**
- *  @brief Set the data rate
- *
- *  @param priv    	A pointer to struct lbs_private structure
- *  @param rate  	The desired data rate, or 0 to clear a locked rate
- *
- *  @return 	   	0 on success, error on failure
- */
-int lbs_set_data_rate(struct lbs_private *priv, u8 rate)
-{
-	struct cmd_ds_802_11_data_rate cmd;
-	int ret = 0;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	memset(&cmd, 0, sizeof(cmd));
-	cmd.hdr.size = cpu_to_le16(sizeof(cmd));
-
-	if (rate > 0) {
-		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_FIX_RATE);
-		cmd.rates[0] = lbs_data_rate_to_fw_index(rate);
-		if (cmd.rates[0] == 0) {
-			lbs_deb_cmd("DATA_RATE: invalid requested rate of"
-			            " 0x%02X\n", rate);
-			ret = 0;
-			goto out;
-		}
-		lbs_deb_cmd("DATA_RATE: set fixed 0x%02X\n", cmd.rates[0]);
-	} else {
-		cmd.action = cpu_to_le16(CMD_ACT_SET_TX_AUTO);
-		lbs_deb_cmd("DATA_RATE: setting auto\n");
-	}
-
-	ret = lbs_cmd_with_response(priv, CMD_802_11_DATA_RATE, &cmd);
-	if (ret)
-		goto out;
-
-	lbs_deb_hex(LBS_DEB_CMD, "DATA_RATE_RESP", (u8 *) &cmd, sizeof (cmd));
-
-	/* FIXME: get actual rates FW can do if this command actually returns
-	 * all data rates supported.
-	 */
-	priv->cur_rate = lbs_fw_index_to_data_rate(cmd.rates[0]);
-	lbs_deb_cmd("DATA_RATE: current rate is 0x%02x\n", priv->cur_rate);
-
-out:
-	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
-	return ret;
-}
-
 /**
  *  @brief Get the radio channel
  *
@@ -803,7 +548,7 @@
  *
  *  @return 	   	The channel on success, error on failure
  */
-int lbs_get_channel(struct lbs_private *priv)
+static int lbs_get_channel(struct lbs_private *priv)
 {
 	struct cmd_ds_802_11_rf_channel cmd;
 	int ret = 0;
@@ -835,7 +580,7 @@
 
 	ret = lbs_get_channel(priv);
 	if (ret > 0) {
-		priv->curbssparams.channel = ret;
+		priv->channel = ret;
 		ret = 0;
 	}
 	lbs_deb_leave_args(LBS_DEB_ASSOC, "ret %d", ret);
@@ -854,7 +599,7 @@
 {
 	struct cmd_ds_802_11_rf_channel cmd;
 #ifdef DEBUG
-	u8 old_channel = priv->curbssparams.channel;
+	u8 old_channel = priv->channel;
 #endif
 	int ret = 0;
 
@@ -869,36 +614,15 @@
 	if (ret)
 		goto out;
 
-	priv->curbssparams.channel = (uint8_t) le16_to_cpu(cmd.channel);
+	priv->channel = (uint8_t) le16_to_cpu(cmd.channel);
 	lbs_deb_cmd("channel switch from %d to %d\n", old_channel,
-		priv->curbssparams.channel);
+		priv->channel);
 
 out:
 	lbs_deb_leave_args(LBS_DEB_CMD, "ret %d", ret);
 	return ret;
 }
 
-static int lbs_cmd_802_11_rssi(struct lbs_private *priv,
-				struct cmd_ds_command *cmd)
-{
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	cmd->command = cpu_to_le16(CMD_802_11_RSSI);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_rssi) + S_DS_GEN);
-	cmd->params.rssi.N = cpu_to_le16(DEFAULT_BCN_AVG_FACTOR);
-
-	/* reset Beacon SNR/NF/RSSI values */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = 0;
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->NF[TYPE_BEACON][TYPE_AVG] = 0;
-	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] = 0;
-	priv->RSSI[TYPE_BEACON][TYPE_AVG] = 0;
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
 static int lbs_cmd_reg_access(struct cmd_ds_command *cmdptr,
 			       u8 cmd_action, void *pdata_buf)
 {
@@ -915,7 +639,7 @@
 
 			cmdptr->size =
 			    cpu_to_le16(sizeof (struct cmd_ds_mac_reg_access)
-					+ S_DS_GEN);
+					+ sizeof(struct cmd_header));
 			macreg =
 			    (struct cmd_ds_mac_reg_access *)&cmdptr->params.
 			    macreg;
@@ -934,7 +658,7 @@
 			cmdptr->size =
 			    cpu_to_le16(sizeof
 					     (struct cmd_ds_bbp_reg_access)
-					     + S_DS_GEN);
+					     + sizeof(struct cmd_header));
 			bbpreg =
 			    (struct cmd_ds_bbp_reg_access *)&cmdptr->params.
 			    bbpreg;
@@ -953,7 +677,7 @@
 			cmdptr->size =
 			    cpu_to_le16(sizeof
 					     (struct cmd_ds_rf_reg_access) +
-					     S_DS_GEN);
+					     sizeof(struct cmd_header));
 			rfreg =
 			    (struct cmd_ds_rf_reg_access *)&cmdptr->params.
 			    rfreg;
@@ -980,7 +704,8 @@
 	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
 
 	cmd->command = cpu_to_le16(CMD_BT_ACCESS);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_bt_access) + S_DS_GEN);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_bt_access) +
+		sizeof(struct cmd_header));
 	cmd->result = 0;
 	bt_access->action = cpu_to_le16(cmd_action);
 
@@ -1017,7 +742,8 @@
 	lbs_deb_enter_args(LBS_DEB_CMD, "action %d", cmd_action);
 
 	cmd->command = cpu_to_le16(CMD_FWT_ACCESS);
-	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access) + S_DS_GEN);
+	cmd->size = cpu_to_le16(sizeof(struct cmd_ds_fwt_access) +
+		sizeof(struct cmd_header));
 	cmd->result = 0;
 
 	if (pdata_buf)
@@ -1123,7 +849,7 @@
 		ie->val.mesh_id_len = priv->mesh_ssid_len;
 		memcpy(ie->val.mesh_id, priv->mesh_ssid, priv->mesh_ssid_len);
 		ie->len = sizeof(struct mrvl_meshie_val) -
-			IW_ESSID_MAX_SIZE + priv->mesh_ssid_len;
+			IEEE80211_MAX_SSID_LEN + priv->mesh_ssid_len;
 		cmd.length = cpu_to_le16(sizeof(struct mrvl_meshie_val));
 		break;
 	case CMD_ACT_MESH_CONFIG_STOP:
@@ -1138,27 +864,6 @@
 	return __lbs_mesh_config_send(priv, &cmd, action, priv->mesh_tlv);
 }
 
-static int lbs_cmd_bcn_ctrl(struct lbs_private * priv,
-				struct cmd_ds_command *cmd,
-				u16 cmd_action)
-{
-	struct cmd_ds_802_11_beacon_control
-		*bcn_ctrl = &cmd->params.bcn_ctrl;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	cmd->size =
-	    cpu_to_le16(sizeof(struct cmd_ds_802_11_beacon_control)
-			     + S_DS_GEN);
-	cmd->command = cpu_to_le16(CMD_802_11_BEACON_CTRL);
-
-	bcn_ctrl->action = cpu_to_le16(cmd_action);
-	bcn_ctrl->beacon_enable = cpu_to_le16(priv->beacon_enable);
-	bcn_ctrl->beacon_period = cpu_to_le16(priv->beacon_period);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
 static void lbs_queue_cmd(struct lbs_private *priv,
 			  struct cmd_ctrl_node *cmdnode)
 {
@@ -1242,8 +947,17 @@
 		timeo = HZ/4;
 	}
 
-	/* Setup the timer after transmit command */
-	mod_timer(&priv->command_timer, jiffies + timeo);
+	if (command == CMD_802_11_DEEP_SLEEP) {
+		if (priv->is_auto_deep_sleep_enabled) {
+			priv->wakeup_dev_required = 1;
+			priv->dnld_sent = 0;
+		}
+		priv->is_deep_sleep = 1;
+		lbs_complete_command(priv, cmdnode, 0);
+	} else {
+		/* Setup the timer after transmit command */
+		mod_timer(&priv->command_timer, jiffies + timeo);
+	}
 
 	lbs_deb_leave(LBS_DEB_HOST);
 }
@@ -1390,6 +1104,11 @@
 		goto done;
 	}
 
+	if (!lbs_is_cmd_allowed(priv)) {
+		ret = -EBUSY;
+		goto done;
+	}
+
 	cmdnode = lbs_get_cmd_ctrl_node(priv);
 
 	if (cmdnode == NULL) {
@@ -1440,7 +1159,7 @@
 
 		cmdptr->command = cpu_to_le16(cmd_no);
 		cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_802_11_afc) +
-					   S_DS_GEN);
+					   sizeof(struct cmd_header));
 
 		memmove(&cmdptr->params.afc,
 			pdata_buf, sizeof(struct cmd_ds_802_11_afc));
@@ -1448,45 +1167,17 @@
 		ret = 0;
 		goto done;
 
-	case CMD_802_11D_DOMAIN_INFO:
-		ret = lbs_cmd_802_11d_domain_info(priv, cmdptr,
-						   cmd_no, cmd_action);
-		break;
-
 	case CMD_802_11_TPC_CFG:
 		cmdptr->command = cpu_to_le16(CMD_802_11_TPC_CFG);
 		cmdptr->size =
 		    cpu_to_le16(sizeof(struct cmd_ds_802_11_tpc_cfg) +
-				     S_DS_GEN);
+				     sizeof(struct cmd_header));
 
 		memmove(&cmdptr->params.tpccfg,
 			pdata_buf, sizeof(struct cmd_ds_802_11_tpc_cfg));
 
 		ret = 0;
 		break;
-	case CMD_802_11_LED_GPIO_CTRL:
-		{
-			struct mrvl_ie_ledgpio *gpio =
-			    (struct mrvl_ie_ledgpio*)
-			    cmdptr->params.ledgpio.data;
-
-			memmove(&cmdptr->params.ledgpio,
-				pdata_buf,
-				sizeof(struct cmd_ds_802_11_led_ctrl));
-
-			cmdptr->command =
-			    cpu_to_le16(CMD_802_11_LED_GPIO_CTRL);
-
-#define ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN 8
-			cmdptr->size =
-			    cpu_to_le16(le16_to_cpu(gpio->header.len)
-				+ S_DS_GEN
-				+ ACTION_NUMLED_TLVTYPE_LEN_FIELDS_LEN);
-			gpio->header.len = gpio->header.len;
-
-			ret = 0;
-			break;
-		}
 
 	case CMD_BT_ACCESS:
 		ret = lbs_cmd_bt_access(cmdptr, cmd_action, pdata_buf);
@@ -1496,15 +1187,13 @@
 		ret = lbs_cmd_fwt_access(cmdptr, cmd_action, pdata_buf);
 		break;
 
-	case CMD_GET_TSF:
-		cmdptr->command = cpu_to_le16(CMD_GET_TSF);
-		cmdptr->size = cpu_to_le16(sizeof(struct cmd_ds_get_tsf) +
-					   S_DS_GEN);
-		ret = 0;
-		break;
 	case CMD_802_11_BEACON_CTRL:
 		ret = lbs_cmd_bcn_ctrl(priv, cmdptr, cmd_action);
 		break;
+	case CMD_802_11_DEEP_SLEEP:
+		cmdptr->command = cpu_to_le16(CMD_802_11_DEEP_SLEEP);
+		cmdptr->size = cpu_to_le16(sizeof(struct cmd_header));
+		break;
 	default:
 		lbs_pr_err("PREP_CMD: unknown command 0x%04x\n", cmd_no);
 		ret = -1;
@@ -1822,30 +1511,6 @@
 	return ret;
 }
 
-void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str)
-{
-	union iwreq_data iwrq;
-	u8 buf[50];
-
-	lbs_deb_enter(LBS_DEB_WEXT);
-
-	memset(&iwrq, 0, sizeof(union iwreq_data));
-	memset(buf, 0, sizeof(buf));
-
-	snprintf(buf, sizeof(buf) - 1, "%s", str);
-
-	iwrq.data.length = strlen(buf) + 1 + IW_EV_LCP_LEN;
-
-	/* Send Event to upper layer */
-	lbs_deb_wext("event indication string %s\n", (char *)buf);
-	lbs_deb_wext("event indication length %d\n", iwrq.data.length);
-	lbs_deb_wext("sending wireless event IWEVCUSTOM for %s\n", str);
-
-	wireless_send_event(priv->dev, IWEVCUSTOM, &iwrq, buf);
-
-	lbs_deb_leave(LBS_DEB_WEXT);
-}
-
 static void lbs_send_confirmsleep(struct lbs_private *priv)
 {
 	unsigned long flags;
@@ -2023,7 +1688,7 @@
 }
 
 
-static struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
+struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
 	uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
 	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
 	unsigned long callback_arg)
@@ -2038,6 +1703,11 @@
 		goto done;
 	}
 
+	if (!lbs_is_cmd_allowed(priv)) {
+		cmdnode = ERR_PTR(-EBUSY);
+		goto done;
+	}
+
 	cmdnode = lbs_get_cmd_ctrl_node(priv);
 	if (cmdnode == NULL) {
 		lbs_deb_host("PREP_CMD: cmdnode is NULL\n");
@@ -2116,5 +1786,3 @@
 	return ret;
 }
 EXPORT_SYMBOL_GPL(__lbs_cmd);
-
-
diff --git a/drivers/net/wireless/libertas/cmd.h b/drivers/net/wireless/libertas/cmd.h
index 392e578..2862748 100644
--- a/drivers/net/wireless/libertas/cmd.h
+++ b/drivers/net/wireless/libertas/cmd.h
@@ -3,11 +3,30 @@
 #ifndef _LBS_CMD_H_
 #define _LBS_CMD_H_
 
-#include "hostcmd.h"
+#include "host.h"
 #include "dev.h"
 
+
+/* Command & response transfer between host and card */
+
+struct cmd_ctrl_node {
+	struct list_head list;
+	int result;
+	/* command response */
+	int (*callback)(struct lbs_private *,
+			unsigned long,
+			struct cmd_header *);
+	unsigned long callback_arg;
+	/* command data */
+	struct cmd_header *cmdbuf;
+	/* wait queue */
+	u16 cmdwaitqwoken;
+	wait_queue_head_t cmdwait_q;
+};
+
+
 /* lbs_cmd() infers the size of the buffer to copy data back into, from
-   the size of the target of the pointer. Since the command to be sent 
+   the size of the target of the pointer. Since the command to be sent
    may often be smaller, that size is set in cmd->size by the caller.*/
 #define lbs_cmd(priv, cmdnr, cmd, cb, cb_arg)	({		\
 	uint16_t __sz = le16_to_cpu((cmd)->hdr.size);		\
@@ -18,6 +37,11 @@
 #define lbs_cmd_with_response(priv, cmdnr, cmd)	\
 	lbs_cmd(priv, cmdnr, cmd, lbs_cmd_copyback, (unsigned long) (cmd))
 
+int lbs_prepare_and_send_command(struct lbs_private *priv,
+	u16 cmd_no,
+	u16 cmd_action,
+	u16 wait_option, u32 cmd_oid, void *pdata_buf);
+
 void lbs_cmd_async(struct lbs_private *priv, uint16_t command,
 	struct cmd_header *in_cmd, int in_cmd_size);
 
@@ -26,62 +50,93 @@
 	      int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
 	      unsigned long callback_arg);
 
-int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
-		int8_t p1, int8_t p2);
-
-int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
-		int8_t p2, int usesnr);
-
-int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
-		int8_t p1, int8_t p2);
-
-int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
-		int8_t p2, int usesnr);
+struct cmd_ctrl_node *__lbs_cmd_async(struct lbs_private *priv,
+	uint16_t command, struct cmd_header *in_cmd, int in_cmd_size,
+	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *),
+	unsigned long callback_arg);
 
 int lbs_cmd_copyback(struct lbs_private *priv, unsigned long extra,
 		     struct cmd_header *resp);
 
+int lbs_allocate_cmd_buffer(struct lbs_private *priv);
+int lbs_free_cmd_buffer(struct lbs_private *priv);
+
+int lbs_execute_next_command(struct lbs_private *priv);
+void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
+			  int result);
+int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len);
+
+
+/* From cmdresp.c */
+
+void lbs_mac_event_disconnected(struct lbs_private *priv);
+
+
+
+/* Events */
+
+int lbs_process_event(struct lbs_private *priv, u32 event);
+
+
+/* Actual commands */
+
 int lbs_update_hw_spec(struct lbs_private *priv);
 
-int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
-		    struct cmd_ds_mesh_access *cmd);
-
-int lbs_set_data_rate(struct lbs_private *priv, u8 rate);
-
-int lbs_get_channel(struct lbs_private *priv);
 int lbs_set_channel(struct lbs_private *priv, u8 channel);
 
-int lbs_mesh_config_send(struct lbs_private *priv,
-			 struct cmd_ds_mesh_config *cmd,
-			 uint16_t action, uint16_t type);
-int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
+int lbs_update_channel(struct lbs_private *priv);
 
 int lbs_host_sleep_cfg(struct lbs_private *priv, uint32_t criteria,
 		struct wol_config *p_wol_config);
-int lbs_suspend(struct lbs_private *priv);
-void lbs_resume(struct lbs_private *priv);
 
-int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
-				      uint16_t cmd_action);
-int lbs_cmd_802_11_inactivity_timeout(struct lbs_private *priv,
-				      uint16_t cmd_action, uint16_t *timeout);
 int lbs_cmd_802_11_sleep_params(struct lbs_private *priv, uint16_t cmd_action,
 				struct sleep_params *sp);
-int lbs_cmd_802_11_set_wep(struct lbs_private *priv, uint16_t cmd_action,
-			   struct assoc_request *assoc);
-int lbs_cmd_802_11_enable_rsn(struct lbs_private *priv, uint16_t cmd_action,
-			      uint16_t *enable);
-int lbs_cmd_802_11_key_material(struct lbs_private *priv, uint16_t cmd_action,
-				struct assoc_request *assoc);
+
+void lbs_ps_sleep(struct lbs_private *priv, int wait_option);
+
+void lbs_ps_wakeup(struct lbs_private *priv, int wait_option);
+
+void lbs_ps_confirm_sleep(struct lbs_private *priv);
+
+int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on);
+
+void lbs_set_mac_control(struct lbs_private *priv);
 
 int lbs_get_tx_power(struct lbs_private *priv, s16 *curlevel, s16 *minlevel,
 		     s16 *maxlevel);
-int lbs_set_tx_power(struct lbs_private *priv, s16 dbm);
-
-int lbs_set_radio(struct lbs_private *priv, u8 preamble, u8 radio_on);
 
 int lbs_set_snmp_mib(struct lbs_private *priv, u32 oid, u16 val);
 
 int lbs_get_snmp_mib(struct lbs_private *priv, u32 oid, u16 *out_val);
 
+
+/* Mesh related */
+
+int lbs_mesh_access(struct lbs_private *priv, uint16_t cmd_action,
+		    struct cmd_ds_mesh_access *cmd);
+
+int lbs_mesh_config_send(struct lbs_private *priv,
+			 struct cmd_ds_mesh_config *cmd,
+			 uint16_t action, uint16_t type);
+
+int lbs_mesh_config(struct lbs_private *priv, uint16_t enable, uint16_t chan);
+
+
+/* Commands only used in wext.c, assoc. and scan.c */
+
+int lbs_set_power_adapt_cfg(struct lbs_private *priv, int enable, int8_t p0,
+		int8_t p1, int8_t p2);
+
+int lbs_set_tpc_cfg(struct lbs_private *priv, int enable, int8_t p0, int8_t p1,
+		int8_t p2, int usesnr);
+
+int lbs_set_data_rate(struct lbs_private *priv, u8 rate);
+
+int lbs_cmd_802_11_rate_adapt_rateset(struct lbs_private *priv,
+				      uint16_t cmd_action);
+
+int lbs_set_tx_power(struct lbs_private *priv, s16 dbm);
+
+int lbs_set_deep_sleep(struct lbs_private *priv, int deep_sleep);
+
 #endif /* _LBS_CMD_H */
diff --git a/drivers/net/wireless/libertas/cmdresp.c b/drivers/net/wireless/libertas/cmdresp.c
index 23f6843..21d5769 100644
--- a/drivers/net/wireless/libertas/cmdresp.c
+++ b/drivers/net/wireless/libertas/cmdresp.c
@@ -11,6 +11,7 @@
 
 #include "host.h"
 #include "decl.h"
+#include "cmd.h"
 #include "defs.h"
 #include "dev.h"
 #include "assoc.h"
@@ -26,23 +27,17 @@
  */
 void lbs_mac_event_disconnected(struct lbs_private *priv)
 {
-	union iwreq_data wrqu;
-
 	if (priv->connect_status != LBS_CONNECTED)
 		return;
 
 	lbs_deb_enter(LBS_DEB_ASSOC);
 
-	memset(wrqu.ap_addr.sa_data, 0x00, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-
 	/*
 	 * Cisco AP sends EAP failure and de-auth in less than 0.5 ms.
 	 * It causes problem in the Supplicant
 	 */
-
 	msleep_interruptible(1000);
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	lbs_send_disconnect_notification(priv);
 
 	/* report disconnect to upper layer */
 	netif_stop_queue(priv->dev);
@@ -67,7 +62,7 @@
 	 * no longer valid.
 	 */
 	memset(&priv->curbssparams.bssid, 0, ETH_ALEN);
-	memset(&priv->curbssparams.ssid, 0, IW_ESSID_MAX_SIZE);
+	memset(&priv->curbssparams.ssid, 0, IEEE80211_MAX_SSID_LEN);
 	priv->curbssparams.ssid_len = 0;
 
 	if (priv->psstate != PS_STATE_FULL_POWER) {
@@ -78,32 +73,6 @@
 	lbs_deb_leave(LBS_DEB_ASSOC);
 }
 
-/**
- *  @brief This function handles MIC failure event.
- *
- *  @param priv    A pointer to struct lbs_private structure
- *  @para  event   the event id
- *  @return 	   n/a
- */
-static void handle_mic_failureevent(struct lbs_private *priv, u32 event)
-{
-	char buf[50];
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	memset(buf, 0, sizeof(buf));
-
-	sprintf(buf, "%s", "MLME-MICHAELMICFAILURE.indication ");
-
-	if (event == MACREG_INT_CODE_MIC_ERR_UNICAST) {
-		strcat(buf, "unicast ");
-	} else {
-		strcat(buf, "multicast ");
-	}
-
-	lbs_send_iwevcustom_event(priv, buf);
-	lbs_deb_leave(LBS_DEB_CMD);
-}
-
 static int lbs_ret_reg_access(struct lbs_private *priv,
 			       u16 type, struct cmd_ds_command *resp)
 {
@@ -147,53 +116,6 @@
 	return ret;
 }
 
-static int lbs_ret_802_11_rssi(struct lbs_private *priv,
-				struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11_rssi_rsp *rssirsp = &resp->params.rssirsp;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	/* store the non average value */
-	priv->SNR[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->SNR);
-	priv->NF[TYPE_BEACON][TYPE_NOAVG] = get_unaligned_le16(&rssirsp->noisefloor);
-
-	priv->SNR[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgSNR);
-	priv->NF[TYPE_BEACON][TYPE_AVG] = get_unaligned_le16(&rssirsp->avgnoisefloor);
-
-	priv->RSSI[TYPE_BEACON][TYPE_NOAVG] =
-	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_NOAVG],
-		     priv->NF[TYPE_BEACON][TYPE_NOAVG]);
-
-	priv->RSSI[TYPE_BEACON][TYPE_AVG] =
-	    CAL_RSSI(priv->SNR[TYPE_BEACON][TYPE_AVG] / AVG_SCALE,
-		     priv->NF[TYPE_BEACON][TYPE_AVG] / AVG_SCALE);
-
-	lbs_deb_cmd("RSSI: beacon %d, avg %d\n",
-	       priv->RSSI[TYPE_BEACON][TYPE_NOAVG],
-	       priv->RSSI[TYPE_BEACON][TYPE_AVG]);
-
-	lbs_deb_leave(LBS_DEB_CMD);
-	return 0;
-}
-
-static int lbs_ret_802_11_bcn_ctrl(struct lbs_private * priv,
-					struct cmd_ds_command *resp)
-{
-	struct cmd_ds_802_11_beacon_control *bcn_ctrl =
-	    &resp->params.bcn_ctrl;
-
-	lbs_deb_enter(LBS_DEB_CMD);
-
-	if (bcn_ctrl->action == CMD_ACT_GET) {
-		priv->beacon_enable = (u8) le16_to_cpu(bcn_ctrl->beacon_enable);
-		priv->beacon_period = le16_to_cpu(bcn_ctrl->beacon_period);
-	}
-
-	lbs_deb_enter(LBS_DEB_CMD);
-	return 0;
-}
-
 static inline int handle_cmd_response(struct lbs_private *priv,
 				      struct cmd_header *cmd_response)
 {
@@ -227,29 +149,13 @@
 		ret = lbs_ret_802_11_rssi(priv, resp);
 		break;
 
-	case CMD_RET(CMD_802_11D_DOMAIN_INFO):
-		ret = lbs_ret_802_11d_domain_info(resp);
-		break;
-
 	case CMD_RET(CMD_802_11_TPC_CFG):
 		spin_lock_irqsave(&priv->driver_lock, flags);
 		memmove((void *)priv->cur_cmd->callback_arg, &resp->params.tpccfg,
 			sizeof(struct cmd_ds_802_11_tpc_cfg));
 		spin_unlock_irqrestore(&priv->driver_lock, flags);
 		break;
-	case CMD_RET(CMD_802_11_LED_GPIO_CTRL):
-		spin_lock_irqsave(&priv->driver_lock, flags);
-		memmove((void *)priv->cur_cmd->callback_arg, &resp->params.ledgpio,
-			sizeof(struct cmd_ds_802_11_led_ctrl));
-		spin_unlock_irqrestore(&priv->driver_lock, flags);
-		break;
 
-	case CMD_RET(CMD_GET_TSF):
-		spin_lock_irqsave(&priv->driver_lock, flags);
-		memcpy((void *)priv->cur_cmd->callback_arg,
-		       &resp->params.gettsf.tsfvalue, sizeof(u64));
-		spin_unlock_irqrestore(&priv->driver_lock, flags);
-		break;
 	case CMD_RET(CMD_BT_ACCESS):
 		spin_lock_irqsave(&priv->driver_lock, flags);
 		if (priv->cur_cmd->callback_arg)
@@ -505,9 +411,21 @@
 
 	case MACREG_INT_CODE_HOST_AWAKE:
 		lbs_deb_cmd("EVENT: host awake\n");
+		if (priv->reset_deep_sleep_wakeup)
+			priv->reset_deep_sleep_wakeup(priv);
+		priv->is_deep_sleep = 0;
 		lbs_send_confirmwake(priv);
 		break;
 
+	case MACREG_INT_CODE_DEEP_SLEEP_AWAKE:
+		if (priv->reset_deep_sleep_wakeup)
+			priv->reset_deep_sleep_wakeup(priv);
+		lbs_deb_cmd("EVENT: ds awake\n");
+		priv->is_deep_sleep = 0;
+		priv->wakeup_dev_required = 0;
+		wake_up_interruptible(&priv->ds_awake_q);
+		break;
+
 	case MACREG_INT_CODE_PS_AWAKE:
 		lbs_deb_cmd("EVENT: ps awake\n");
 		/* handle unexpected PS AWAKE event */
@@ -533,12 +451,12 @@
 
 	case MACREG_INT_CODE_MIC_ERR_UNICAST:
 		lbs_deb_cmd("EVENT: UNICAST MIC ERROR\n");
-		handle_mic_failureevent(priv, MACREG_INT_CODE_MIC_ERR_UNICAST);
+		lbs_send_mic_failureevent(priv, event);
 		break;
 
 	case MACREG_INT_CODE_MIC_ERR_MULTICAST:
 		lbs_deb_cmd("EVENT: MULTICAST MIC ERROR\n");
-		handle_mic_failureevent(priv, MACREG_INT_CODE_MIC_ERR_MULTICAST);
+		lbs_send_mic_failureevent(priv, event);
 		break;
 
 	case MACREG_INT_CODE_MIB_CHANGED:
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index 893a55c..587b0cb 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -451,10 +451,12 @@
 				CMD_MAC_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "MAC[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "MAC[0x%x] = 0x%08x\n",
 				priv->mac_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 	return ret;
 }
@@ -514,7 +516,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
@@ -539,10 +542,12 @@
 				CMD_BBP_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "BBP[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "BBP[0x%x] = 0x%08x\n",
 				priv->bbp_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 
 	return ret;
@@ -603,7 +608,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
@@ -628,10 +634,12 @@
 				CMD_RF_REG_ACCESS, 0,
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
-	pos += snprintf(buf+pos, len-pos, "RF[0x%x] = 0x%08x\n",
+	if (!ret) {
+		pos += snprintf(buf+pos, len-pos, "RF[0x%x] = 0x%08x\n",
 				priv->rf_offset, priv->offsetvalue.value);
 
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+		ret = simple_read_from_buffer(userbuf, count, ppos, buf, pos);
+	}
 	free_page(addr);
 
 	return ret;
@@ -692,7 +700,8 @@
 				CMD_OPTION_WAITFORRSP, 0, &offval);
 	mdelay(10);
 
-	res = count;
+	if (!res)
+		res = count;
 out_unlock:
 	free_page(addr);
 	return res;
diff --git a/drivers/net/wireless/libertas/decl.h b/drivers/net/wireless/libertas/decl.h
index 8b15380..678f7c9 100644
--- a/drivers/net/wireless/libertas/decl.h
+++ b/drivers/net/wireless/libertas/decl.h
@@ -8,71 +8,48 @@
 
 #include <linux/netdevice.h>
 
-#include "defs.h"
 
-/** Function Prototype Declaration */
 struct lbs_private;
 struct sk_buff;
 struct net_device;
-struct cmd_ctrl_node;
-struct cmd_ds_command;
 
-void lbs_set_mac_control(struct lbs_private *priv);
 
+/* ethtool.c */
+extern const struct ethtool_ops lbs_ethtool_ops;
+
+
+/* tx.c */
 void lbs_send_tx_feedback(struct lbs_private *priv, u32 try_count);
-
-int lbs_free_cmd_buffer(struct lbs_private *priv);
-
-int lbs_prepare_and_send_command(struct lbs_private *priv,
-	u16 cmd_no,
-	u16 cmd_action,
-	u16 wait_option, u32 cmd_oid, void *pdata_buf);
-
-int lbs_allocate_cmd_buffer(struct lbs_private *priv);
-int lbs_execute_next_command(struct lbs_private *priv);
-int lbs_process_event(struct lbs_private *priv, u32 event);
-void lbs_queue_event(struct lbs_private *priv, u32 event);
-void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
-
-u32 lbs_fw_index_to_data_rate(u8 index);
-u8 lbs_data_rate_to_fw_index(u32 rate);
-
-/** The proc fs interface */
-int lbs_process_command_response(struct lbs_private *priv, u8 *data, u32 len);
-void lbs_complete_command(struct lbs_private *priv, struct cmd_ctrl_node *cmd,
-			  int result);
 netdev_tx_t lbs_hard_start_xmit(struct sk_buff *skb,
 				struct net_device *dev);
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
 
+/* rx.c */
 int lbs_process_rxed_packet(struct lbs_private *priv, struct sk_buff *);
 
-void lbs_ps_sleep(struct lbs_private *priv, int wait_option);
-void lbs_ps_confirm_sleep(struct lbs_private *priv);
-void lbs_ps_wakeup(struct lbs_private *priv, int wait_option);
-
-struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
-	struct lbs_private *priv,
-	u8 band,
-	u16 channel);
-
-void lbs_mac_event_disconnected(struct lbs_private *priv);
-
-void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str);
 
 /* persistcfg.c */
 void lbs_persist_config_init(struct net_device *net);
 void lbs_persist_config_remove(struct net_device *net);
 
+
 /* main.c */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region,
-	int *cfp_no);
 struct lbs_private *lbs_add_card(void *card, struct device *dmdev);
 void lbs_remove_card(struct lbs_private *priv);
 int lbs_start_card(struct lbs_private *priv);
 void lbs_stop_card(struct lbs_private *priv);
 void lbs_host_to_card_done(struct lbs_private *priv);
 
-int lbs_update_channel(struct lbs_private *priv);
+int lbs_suspend(struct lbs_private *priv);
+void lbs_resume(struct lbs_private *priv);
+
+void lbs_queue_event(struct lbs_private *priv, u32 event);
+void lbs_notify_command_response(struct lbs_private *priv, u8 resp_idx);
+
+int lbs_enter_auto_deep_sleep(struct lbs_private *priv);
+int lbs_exit_auto_deep_sleep(struct lbs_private *priv);
+
+u32 lbs_fw_index_to_data_rate(u8 index);
+u8 lbs_data_rate_to_fw_index(u32 rate);
+
 
 #endif
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 72f3479..6b6ea9f 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -42,6 +42,7 @@
 #define LBS_DEB_SDIO	0x00400000
 #define LBS_DEB_SYSFS	0x00800000
 #define LBS_DEB_SPI	0x01000000
+#define LBS_DEB_CFG80211 0x02000000
 
 extern unsigned int lbs_debug;
 
@@ -86,6 +87,7 @@
 #define lbs_deb_sdio(fmt, args...)      LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
 #define lbs_deb_sysfs(fmt, args...)     LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
 #define lbs_deb_spi(fmt, args...)       LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
+#define lbs_deb_cfg80211(fmt, args...)  LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
 
 #define lbs_pr_info(format, args...) \
 	printk(KERN_INFO DRV_NAME": " format, ## args)
@@ -320,7 +322,6 @@
 extern const char lbs_driver_version[];
 extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
 
-extern u8 lbs_bg_rates[MAX_RATES];
 
 /** ENUM definition*/
 /** SNRNF_TYPE */
diff --git a/drivers/net/wireless/libertas/dev.h b/drivers/net/wireless/libertas/dev.h
index d3b69a4..1a67511 100644
--- a/drivers/net/wireless/libertas/dev.h
+++ b/drivers/net/wireless/libertas/dev.h
@@ -6,75 +6,10 @@
 #ifndef _LBS_DEV_H_
 #define _LBS_DEV_H_
 
-#include <linux/netdevice.h>
-#include <linux/wireless.h>
-#include <linux/ethtool.h>
-#include <linux/debugfs.h>
+#include "scan.h"
+#include "assoc.h"
 
-#include "defs.h"
-#include "hostcmd.h"
 
-extern const struct ethtool_ops lbs_ethtool_ops;
-
-#define	MAX_BSSID_PER_CHANNEL		16
-
-#define NR_TX_QUEUE			3
-
-/* For the extended Scan */
-#define MAX_EXTENDED_SCAN_BSSID_LIST    MAX_BSSID_PER_CHANNEL * \
-						MRVDRV_MAX_CHANNEL_SIZE + 1
-
-#define	MAX_REGION_CHANNEL_NUM	2
-
-/** Chan-freq-TxPower mapping table*/
-struct chan_freq_power {
-	/** channel Number		*/
-	u16 channel;
-	/** frequency of this channel	*/
-	u32 freq;
-	/** Max allowed Tx power level	*/
-	u16 maxtxpower;
-	/** TRUE:channel unsupported;  FLASE:supported*/
-	u8 unsupported;
-};
-
-/** region-band mapping table*/
-struct region_channel {
-	/** TRUE if this entry is valid		     */
-	u8 valid;
-	/** region code for US, Japan ...	     */
-	u8 region;
-	/** band B/G/A, used for BAND_CONFIG cmd	     */
-	u8 band;
-	/** Actual No. of elements in the array below */
-	u8 nrcfp;
-	/** chan-freq-txpower mapping table*/
-	struct chan_freq_power *CFP;
-};
-
-struct lbs_802_11_security {
-	u8 WPAenabled;
-	u8 WPA2enabled;
-	u8 wep_enabled;
-	u8 auth_mode;
-	u32 key_mgmt;
-};
-
-/** Current Basic Service Set State Structure */
-struct current_bss_params {
-	/** bssid */
-	u8 bssid[ETH_ALEN];
-	/** ssid */
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	/** band */
-	u8 band;
-	/** channel */
-	u8 channel;
-	/** zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-};
 
 /** sleep_params */
 struct sleep_params {
@@ -100,95 +35,96 @@
 
 /** Private structure for the MV device */
 struct lbs_private {
+
+	/* Basic networking */
+	struct net_device *dev;
+	u32 connect_status;
+	int infra_open;
+	struct work_struct mcast_work;
+	u32 nr_of_multicastmacaddr;
+	u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
+
+	/* CFG80211 */
+	struct wireless_dev *wdev;
+
+	/* Mesh */
+	struct net_device *mesh_dev; /* Virtual device */
+	u32 mesh_connect_status;
+	struct lbs_mesh_stats mstats;
 	int mesh_open;
 	int mesh_fw_ver;
-	int infra_open;
 	int mesh_autostart_enabled;
+	uint16_t mesh_tlv;
+	u8 mesh_ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 mesh_ssid_len;
+	struct work_struct sync_channel;
 
-	char name[DEV_NAME_LEN];
-
-	void *card;
-	struct net_device *dev;
-
-	struct net_device *mesh_dev; /* Virtual device */
+	/* Monitor mode */
 	struct net_device *rtap_net_dev;
+	u32 monitormode;
 
-	struct iw_statistics wstats;
-	struct lbs_mesh_stats mstats;
+	/* Debugfs */
 	struct dentry *debugfs_dir;
 	struct dentry *debugfs_debug;
 	struct dentry *debugfs_files[6];
-
 	struct dentry *events_dir;
 	struct dentry *debugfs_events_files[6];
-
 	struct dentry *regs_dir;
 	struct dentry *debugfs_regs_files[6];
 
+	/* Hardware debugging */
 	u32 mac_offset;
 	u32 bbp_offset;
 	u32 rf_offset;
+	struct lbs_offset_value offsetvalue;
 
-	/* Download sent:
-	   bit0 1/0=data_sent/data_tx_done,
-	   bit1 1/0=cmd_sent/cmd_tx_done,
-	   all other bits reserved 0 */
-	u8 dnld_sent;
+	/* Power management */
+	u16 psmode;
+	u32 psstate;
+	u8 needtowakeup;
 
-	/** thread to service interrupts */
-	struct task_struct *main_thread;
-	wait_queue_head_t waitq;
-	struct workqueue_struct *work_thread;
+	/* Deep sleep */
+	int is_deep_sleep;
+	int is_auto_deep_sleep_enabled;
+	int wakeup_dev_required;
+	int is_activity_detected;
+	int auto_deep_sleep_timeout; /* in ms */
+	wait_queue_head_t ds_awake_q;
+	struct timer_list auto_deepsleep_timer;
 
-	struct work_struct mcast_work;
-
-	/** Scanning */
-	struct delayed_work scan_work;
-	struct delayed_work assoc_work;
-	struct work_struct sync_channel;
-	/* remember which channel was scanned last, != 0 if currently scanning */
-	int scan_channel;
-	u8 scan_ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 scan_ssid_len;
-
-	/** Hardware access */
+	/* Hardware access */
+	void *card;
+	u8 fw_ready;
+	u8 surpriseremoved;
 	int (*hw_host_to_card) (struct lbs_private *priv, u8 type, u8 *payload, u16 nb);
 	void (*reset_card) (struct lbs_private *priv);
+	int (*enter_deep_sleep) (struct lbs_private *priv);
+	int (*exit_deep_sleep) (struct lbs_private *priv);
+	int (*reset_deep_sleep_wakeup) (struct lbs_private *priv);
 
-	/* Wake On LAN */
-	uint32_t wol_criteria;
-	uint8_t wol_gpio;
-	uint8_t wol_gap;
-
-	/** Wlan adapter data structure*/
-	/** STATUS variables */
+	/* Adapter info (from EEPROM) */
 	u32 fwrelease;
 	u32 fwcapinfo;
+	u16 regioncode;
+	u8 current_addr[ETH_ALEN];
 
-	struct mutex lock;
-
-	/* TX packet ready to be sent... */
-	int tx_pending_len;		/* -1 while building packet */
-
-	u8 tx_pending_buf[LBS_UPLD_SIZE];
-	/* protected by hard_start_xmit serialization */
-
-	/** command-related variables */
+	/* Command download */
+	u8 dnld_sent;
+	/* bit0 1/0=data_sent/data_tx_done,
+	   bit1 1/0=cmd_sent/cmd_tx_done,
+	   all other bits reserved 0 */
 	u16 seqnum;
-
 	struct cmd_ctrl_node *cmd_array;
-	/** Current command */
 	struct cmd_ctrl_node *cur_cmd;
-	int cur_cmd_retcode;
-	/** command Queues */
-	/** Free command buffers */
-	struct list_head cmdfreeq;
-	/** Pending command buffers */
-	struct list_head cmdpendingq;
-
+	struct list_head cmdfreeq;    /* free command buffers */
+	struct list_head cmdpendingq; /* pending command buffers */
 	wait_queue_head_t cmd_pending;
+	struct timer_list command_timer;
+	int nr_retries;
+	int cmd_timed_out;
 
 	/* Command responses sent from the hardware to the driver */
+	int cur_cmd_retcode;
 	u8 resp_idx;
 	u8 resp_buf[2][LBS_UPLD_SIZE];
 	u32 resp_len[2];
@@ -196,95 +132,76 @@
 	/* Events sent from hardware to driver */
 	struct kfifo *event_fifo;
 
-	/* nickname */
-	u8 nodename[16];
+	/** thread to service interrupts */
+	struct task_struct *main_thread;
+	wait_queue_head_t waitq;
+	struct workqueue_struct *work_thread;
 
-	/** spin locks */
-	spinlock_t driver_lock;
+	/** Encryption stuff */
+	struct lbs_802_11_security secinfo;
+	struct enc_key wpa_mcast_key;
+	struct enc_key wpa_unicast_key;
+	u8 wpa_ie[MAX_WPA_IE_LEN];
+	u8 wpa_ie_len;
+	u16 wep_tx_keyidx;
+	struct enc_key wep_keys[4];
 
-	/** Timers */
-	struct timer_list command_timer;
-	int nr_retries;
-	int cmd_timed_out;
+	/* Wake On LAN */
+	uint32_t wol_criteria;
+	uint8_t wol_gpio;
+	uint8_t wol_gap;
 
-	/** current ssid/bssid related parameters*/
-	struct current_bss_params curbssparams;
-
-	uint16_t mesh_tlv;
-	u8 mesh_ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 mesh_ssid_len;
-
-	/* IW_MODE_* */
-	u8 mode;
-
-	/* Scan results list */
-	struct list_head network_list;
-	struct list_head network_free_list;
-	struct bss_descriptor *networks;
-
-	u16 beacon_period;
-	u8 beacon_enable;
-	u8 adhoccreate;
-
-	/** capability Info used in Association, start, join */
-	u16 capability;
-
-	/** MAC address information */
-	u8 current_addr[ETH_ALEN];
-	u8 multicastlist[MRVDRV_MAX_MULTICAST_LIST_SIZE][ETH_ALEN];
-	u32 nr_of_multicastmacaddr;
-
-	/** 802.11 statistics */
-//	struct cmd_DS_802_11_GET_STAT wlan802_11Stat;
-
-	uint16_t enablehwauto;
-	uint16_t ratebitmap;
-
+	/* Transmitting */
+	int tx_pending_len;		/* -1 while building packet */
+	u8 tx_pending_buf[LBS_UPLD_SIZE];
+	/* protected by hard_start_xmit serialization */
 	u8 txretrycount;
-
-	/** Tx-related variables (for single packet tx) */
 	struct sk_buff *currenttxskb;
 
-	/** NIC Operation characteristics */
+	/* Locks */
+	struct mutex lock;
+	spinlock_t driver_lock;
+
+	/* NIC/link operation characteristics */
 	u16 mac_control;
-	u32 connect_status;
-	u32 mesh_connect_status;
-	u16 regioncode;
+	u8 radio_on;
+	u8 channel;
 	s16 txpower_cur;
 	s16 txpower_min;
 	s16 txpower_max;
 
-	/** POWER MANAGEMENT AND PnP SUPPORT */
-	u8 surpriseremoved;
+	/** Scanning */
+	struct delayed_work scan_work;
+	int scan_channel;
+	/* remember which channel was scanned last, != 0 if currently scanning */
+	u8 scan_ssid[IEEE80211_MAX_SSID_LEN + 1];
+	u8 scan_ssid_len;
 
-	u16 psmode;		/* Wlan802_11PowermodeCAM=disable
-				   Wlan802_11PowermodeMAX_PSP=enable */
-	u32 psstate;
-	u8 needtowakeup;
-
+	/* Associating */
+	struct delayed_work assoc_work;
+	struct current_bss_params curbssparams;
+	u8 mode;
+	struct list_head network_list;
+	struct list_head network_free_list;
+	struct bss_descriptor *networks;
 	struct assoc_request * pending_assoc_req;
 	struct assoc_request * in_progress_assoc_req;
+	u16 capability;
+	uint16_t enablehwauto;
+	uint16_t ratebitmap;
 
-	/** Encryption parameter */
-	struct lbs_802_11_security secinfo;
+	/* ADHOC */
+	u16 beacon_period;
+	u8 beacon_enable;
+	u8 adhoccreate;
 
-	/** WEP keys */
-	struct enc_key wep_keys[4];
-	u16 wep_tx_keyidx;
-
-	/** WPA keys */
-	struct enc_key wpa_mcast_key;
-	struct enc_key wpa_unicast_key;
-
-/*
- * In theory, the IE is limited to the IE length, 255,
- * but in practice 64 bytes are enough.
- */
-#define MAX_WPA_IE_LEN 64
-
-	/** WPA Information Elements*/
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	u8 wpa_ie_len;
+	/* WEXT */
+	char name[DEV_NAME_LEN];
+	u8 nodename[16];
+	struct iw_statistics wstats;
+	u8 cur_rate;
+#define	MAX_REGION_CHANNEL_NUM	2
+	struct region_channel region_channel[MAX_REGION_CHANNEL_NUM];
 
 	/** Requested Signal Strength*/
 	u16 SNR[MAX_TYPE_B][MAX_TYPE_AVG];
@@ -294,116 +211,8 @@
 	u8 rawNF[DEFAULT_DATA_AVG_FACTOR];
 	u16 nextSNRNF;
 	u16 numSNRNF;
-
-	u8 radio_on;
-
-	/** data rate stuff */
-	u8 cur_rate;
-
-	/** RF calibration data */
-
-#define	MAX_REGION_CHANNEL_NUM	2
-	/** region channel data */
-	struct region_channel region_channel[MAX_REGION_CHANNEL_NUM];
-
-	struct region_channel universal_channel[MAX_REGION_CHANNEL_NUM];
-
-	/** 11D and Domain Regulatory Data */
-	struct lbs_802_11d_domain_reg domainreg;
-	struct parsed_region_chan_11d parsed_region_chan;
-
-	/** FSM variable for 11d support */
-	u32 enable11d;
-
-	/**	MISCELLANEOUS */
-	struct lbs_offset_value offsetvalue;
-
-	u32 monitormode;
-	u8 fw_ready;
 };
 
 extern struct cmd_confirm_sleep confirm_sleep;
 
-/**
- *  @brief Structure used to store information for each beacon/probe response
- */
-struct bss_descriptor {
-	u8 bssid[ETH_ALEN];
-
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-
-	u16 capability;
-	u32 rssi;
-	u32 channel;
-	u16 beaconperiod;
-	__le16 atimwindow;
-
-	/* IW_MODE_AUTO, IW_MODE_ADHOC, IW_MODE_INFRA */
-	u8 mode;
-
-	/* zero-terminated array of supported data rates */
-	u8 rates[MAX_RATES + 1];
-
-	unsigned long last_scanned;
-
-	union ieee_phy_param_set phy;
-	union ieee_ss_param_set ss;
-
-	struct ieee_ie_country_info_full_set countryinfo;
-
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	size_t wpa_ie_len;
-	u8 rsn_ie[MAX_WPA_IE_LEN];
-	size_t rsn_ie_len;
-
-	u8 mesh;
-
-	struct list_head list;
-};
-
-/** Association request
- *
- * Encapsulates all the options that describe a specific assocation request
- * or configuration of the wireless card's radio, mode, and security settings.
- */
-struct assoc_request {
-#define ASSOC_FLAG_SSID			1
-#define ASSOC_FLAG_CHANNEL		2
-#define ASSOC_FLAG_BAND			3
-#define ASSOC_FLAG_MODE			4
-#define ASSOC_FLAG_BSSID		5
-#define ASSOC_FLAG_WEP_KEYS		6
-#define ASSOC_FLAG_WEP_TX_KEYIDX	7
-#define ASSOC_FLAG_WPA_MCAST_KEY	8
-#define ASSOC_FLAG_WPA_UCAST_KEY	9
-#define ASSOC_FLAG_SECINFO		10
-#define ASSOC_FLAG_WPA_IE		11
-	unsigned long flags;
-
-	u8 ssid[IW_ESSID_MAX_SIZE + 1];
-	u8 ssid_len;
-	u8 channel;
-	u8 band;
-	u8 mode;
-	u8 bssid[ETH_ALEN] __attribute__ ((aligned (2)));
-
-	/** WEP keys */
-	struct enc_key wep_keys[4];
-	u16 wep_tx_keyidx;
-
-	/** WPA keys */
-	struct enc_key wpa_mcast_key;
-	struct enc_key wpa_unicast_key;
-
-	struct lbs_802_11_security secinfo;
-
-	/** WPA Information Elements*/
-	u8 wpa_ie[MAX_WPA_IE_LEN];
-	u8 wpa_ie_len;
-
-	/* BSS to associate with for infrastructure of Ad-Hoc join */
-	struct bss_descriptor bss;
-};
-
 #endif
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
index fe8f0cb..3809c0b 100644
--- a/drivers/net/wireless/libertas/host.h
+++ b/drivers/net/wireless/libertas/host.h
@@ -1,201 +1,190 @@
 /**
-  * This file contains definitions of WLAN commands.
+  * This file function prototypes, data structure
+  * and  definitions for all the host/station commands
   */
 
 #ifndef _LBS_HOST_H_
 #define _LBS_HOST_H_
 
-/** PUBLIC DEFINITIONS */
-#define DEFAULT_AD_HOC_CHANNEL			6
-#define	DEFAULT_AD_HOC_CHANNEL_A		36
+#include "types.h"
+#include "defs.h"
 
-#define CMD_OPTION_WAITFORRSP			0x0002
+#define DEFAULT_AD_HOC_CHANNEL                  6
+
+#define CMD_OPTION_WAITFORRSP                   0x0002
 
 /** Host command IDs */
 
 /* Return command are almost always the same as the host command, but with
  * bit 15 set high.  There are a few exceptions, though...
  */
-#define CMD_RET(cmd)			(0x8000 | cmd)
+#define CMD_RET(cmd)                            (0x8000 | cmd)
 
 /* Return command convention exceptions: */
-#define CMD_RET_802_11_ASSOCIATE		0x8012
+#define CMD_RET_802_11_ASSOCIATE                0x8012
 
 /* Command codes */
-#define CMD_GET_HW_SPEC				0x0003
-#define	CMD_EEPROM_UPDATE			0x0004
-#define CMD_802_11_RESET			0x0005
-#define	CMD_802_11_SCAN				0x0006
-#define CMD_802_11_GET_LOG			0x000b
-#define CMD_MAC_MULTICAST_ADR			0x0010
-#define CMD_802_11_AUTHENTICATE			0x0011
-#define CMD_802_11_EEPROM_ACCESS		0x0059
-#define CMD_802_11_ASSOCIATE			0x0050
-#define CMD_802_11_SET_WEP			0x0013
-#define CMD_802_11_GET_STAT			0x0014
-#define CMD_802_3_GET_STAT			0x0015
-#define CMD_802_11_SNMP_MIB			0x0016
-#define CMD_MAC_REG_MAP				0x0017
-#define CMD_BBP_REG_MAP				0x0018
-#define CMD_MAC_REG_ACCESS			0x0019
-#define CMD_BBP_REG_ACCESS			0x001a
-#define CMD_RF_REG_ACCESS			0x001b
-#define CMD_802_11_RADIO_CONTROL		0x001c
-#define CMD_802_11_RF_CHANNEL			0x001d
-#define CMD_802_11_RF_TX_POWER			0x001e
-#define CMD_802_11_RSSI				0x001f
-#define CMD_802_11_RF_ANTENNA			0x0020
-#define CMD_802_11_PS_MODE			0x0021
-#define CMD_802_11_DATA_RATE			0x0022
-#define CMD_RF_REG_MAP				0x0023
-#define CMD_802_11_DEAUTHENTICATE		0x0024
-#define CMD_802_11_REASSOCIATE			0x0025
-#define CMD_MAC_CONTROL				0x0028
-#define CMD_802_11_AD_HOC_START			0x002b
-#define CMD_802_11_AD_HOC_JOIN			0x002c
-#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS	0x002e
-#define CMD_802_11_ENABLE_RSN			0x002f
-#define CMD_802_11_SET_AFC			0x003c
-#define CMD_802_11_GET_AFC			0x003d
-#define CMD_802_11_AD_HOC_STOP			0x0040
-#define CMD_802_11_HOST_SLEEP_CFG		0x0043
-#define CMD_802_11_WAKEUP_CONFIRM		0x0044
-#define CMD_802_11_HOST_SLEEP_ACTIVATE		0x0045
-#define CMD_802_11_BEACON_STOP			0x0049
-#define CMD_802_11_MAC_ADDRESS			0x004d
-#define CMD_802_11_LED_GPIO_CTRL		0x004e
-#define CMD_802_11_EEPROM_ACCESS		0x0059
-#define CMD_802_11_BAND_CONFIG			0x0058
-#define CMD_GSPI_BUS_CONFIG			0x005a
-#define CMD_802_11D_DOMAIN_INFO			0x005b
-#define CMD_802_11_KEY_MATERIAL			0x005e
-#define CMD_802_11_SLEEP_PARAMS			0x0066
-#define CMD_802_11_INACTIVITY_TIMEOUT		0x0067
-#define CMD_802_11_SLEEP_PERIOD			0x0068
-#define CMD_802_11_TPC_CFG			0x0072
-#define CMD_802_11_PA_CFG			0x0073
-#define CMD_802_11_FW_WAKE_METHOD		0x0074
-#define CMD_802_11_SUBSCRIBE_EVENT		0x0075
-#define CMD_802_11_RATE_ADAPT_RATESET		0x0076
-#define CMD_802_11_TX_RATE_QUERY		0x007f
-#define	CMD_GET_TSF				0x0080
-#define CMD_BT_ACCESS				0x0087
-#define CMD_FWT_ACCESS				0x0095
-#define CMD_802_11_MONITOR_MODE			0x0098
-#define CMD_MESH_ACCESS				0x009b
-#define CMD_MESH_CONFIG_OLD			0x00a3
-#define CMD_MESH_CONFIG				0x00ac
-#define	CMD_SET_BOOT2_VER			0x00a5
-#define	CMD_FUNC_INIT				0x00a9
-#define	CMD_FUNC_SHUTDOWN			0x00aa
-#define CMD_802_11_BEACON_CTRL			0x00b0
+#define CMD_GET_HW_SPEC                         0x0003
+#define CMD_EEPROM_UPDATE                       0x0004
+#define CMD_802_11_RESET                        0x0005
+#define CMD_802_11_SCAN                         0x0006
+#define CMD_802_11_GET_LOG                      0x000b
+#define CMD_MAC_MULTICAST_ADR                   0x0010
+#define CMD_802_11_AUTHENTICATE                 0x0011
+#define CMD_802_11_EEPROM_ACCESS                0x0059
+#define CMD_802_11_ASSOCIATE                    0x0050
+#define CMD_802_11_SET_WEP                      0x0013
+#define CMD_802_11_GET_STAT                     0x0014
+#define CMD_802_3_GET_STAT                      0x0015
+#define CMD_802_11_SNMP_MIB                     0x0016
+#define CMD_MAC_REG_MAP                         0x0017
+#define CMD_BBP_REG_MAP                         0x0018
+#define CMD_MAC_REG_ACCESS                      0x0019
+#define CMD_BBP_REG_ACCESS                      0x001a
+#define CMD_RF_REG_ACCESS                       0x001b
+#define CMD_802_11_RADIO_CONTROL                0x001c
+#define CMD_802_11_RF_CHANNEL                   0x001d
+#define CMD_802_11_RF_TX_POWER                  0x001e
+#define CMD_802_11_RSSI                         0x001f
+#define CMD_802_11_RF_ANTENNA                   0x0020
+#define CMD_802_11_PS_MODE                      0x0021
+#define CMD_802_11_DATA_RATE                    0x0022
+#define CMD_RF_REG_MAP                          0x0023
+#define CMD_802_11_DEAUTHENTICATE               0x0024
+#define CMD_802_11_REASSOCIATE                  0x0025
+#define CMD_MAC_CONTROL                         0x0028
+#define CMD_802_11_AD_HOC_START                 0x002b
+#define CMD_802_11_AD_HOC_JOIN                  0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
+#define CMD_802_11_ENABLE_RSN                   0x002f
+#define CMD_802_11_SET_AFC                      0x003c
+#define CMD_802_11_GET_AFC                      0x003d
+#define CMD_802_11_DEEP_SLEEP                   0x003e
+#define CMD_802_11_AD_HOC_STOP                  0x0040
+#define CMD_802_11_HOST_SLEEP_CFG               0x0043
+#define CMD_802_11_WAKEUP_CONFIRM               0x0044
+#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
+#define CMD_802_11_BEACON_STOP                  0x0049
+#define CMD_802_11_MAC_ADDRESS                  0x004d
+#define CMD_802_11_LED_GPIO_CTRL                0x004e
+#define CMD_802_11_EEPROM_ACCESS                0x0059
+#define CMD_802_11_BAND_CONFIG                  0x0058
+#define CMD_GSPI_BUS_CONFIG                     0x005a
+#define CMD_802_11D_DOMAIN_INFO                 0x005b
+#define CMD_802_11_KEY_MATERIAL                 0x005e
+#define CMD_802_11_SLEEP_PARAMS                 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
+#define CMD_802_11_SLEEP_PERIOD                 0x0068
+#define CMD_802_11_TPC_CFG                      0x0072
+#define CMD_802_11_PA_CFG                       0x0073
+#define CMD_802_11_FW_WAKE_METHOD               0x0074
+#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
+#define CMD_802_11_TX_RATE_QUERY                0x007f
+#define CMD_GET_TSF                             0x0080
+#define CMD_BT_ACCESS                           0x0087
+#define CMD_FWT_ACCESS                          0x0095
+#define CMD_802_11_MONITOR_MODE                 0x0098
+#define CMD_MESH_ACCESS                         0x009b
+#define CMD_MESH_CONFIG_OLD                     0x00a3
+#define CMD_MESH_CONFIG                         0x00ac
+#define CMD_SET_BOOT2_VER                       0x00a5
+#define CMD_FUNC_INIT                           0x00a9
+#define CMD_FUNC_SHUTDOWN                       0x00aa
+#define CMD_802_11_BEACON_CTRL                  0x00b0
 
 /* For the IEEE Power Save */
-#define CMD_SUBCMD_ENTER_PS		0x0030
-#define CMD_SUBCMD_EXIT_PS		0x0031
-#define CMD_SUBCMD_SLEEP_CONFIRMED	0x0034
-#define CMD_SUBCMD_FULL_POWERDOWN	0x0035
-#define CMD_SUBCMD_FULL_POWERUP		0x0036
+#define CMD_SUBCMD_ENTER_PS                     0x0030
+#define CMD_SUBCMD_EXIT_PS                      0x0031
+#define CMD_SUBCMD_SLEEP_CONFIRMED              0x0034
+#define CMD_SUBCMD_FULL_POWERDOWN               0x0035
+#define CMD_SUBCMD_FULL_POWERUP                 0x0036
 
-#define CMD_ENABLE_RSN			0x0001
-#define CMD_DISABLE_RSN			0x0000
+#define CMD_ENABLE_RSN                          0x0001
+#define CMD_DISABLE_RSN                         0x0000
 
-#define CMD_ACT_GET			0x0000
-#define CMD_ACT_SET			0x0001
-#define CMD_ACT_GET_AES			0x0002
-#define CMD_ACT_SET_AES			0x0003
-#define CMD_ACT_REMOVE_AES		0x0004
+#define CMD_ACT_GET                             0x0000
+#define CMD_ACT_SET                             0x0001
 
 /* Define action or option for CMD_802_11_SET_WEP */
-#define CMD_ACT_ADD			0x0002
-#define CMD_ACT_REMOVE			0x0004
-#define CMD_ACT_USE_DEFAULT		0x0008
+#define CMD_ACT_ADD                             0x0002
+#define CMD_ACT_REMOVE                          0x0004
 
-#define CMD_TYPE_WEP_40_BIT		0x01
-#define CMD_TYPE_WEP_104_BIT		0x02
+#define CMD_TYPE_WEP_40_BIT                     0x01
+#define CMD_TYPE_WEP_104_BIT                    0x02
 
-#define CMD_NUM_OF_WEP_KEYS		4
+#define CMD_NUM_OF_WEP_KEYS                     4
 
-#define CMD_WEP_KEY_INDEX_MASK		0x3fff
-
-/* Define action or option for CMD_802_11_RESET */
-#define CMD_ACT_HALT			0x0003
+#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
 
 /* Define action or option for CMD_802_11_SCAN */
-#define CMD_BSS_TYPE_BSS		0x0001
-#define CMD_BSS_TYPE_IBSS		0x0002
-#define CMD_BSS_TYPE_ANY		0x0003
+#define CMD_BSS_TYPE_BSS                        0x0001
+#define CMD_BSS_TYPE_IBSS                       0x0002
+#define CMD_BSS_TYPE_ANY                        0x0003
 
 /* Define action or option for CMD_802_11_SCAN */
-#define CMD_SCAN_TYPE_ACTIVE		0x0000
-#define CMD_SCAN_TYPE_PASSIVE		0x0001
+#define CMD_SCAN_TYPE_ACTIVE                    0x0000
+#define CMD_SCAN_TYPE_PASSIVE                   0x0001
 
-#define CMD_SCAN_RADIO_TYPE_BG		0
+#define CMD_SCAN_RADIO_TYPE_BG                  0
 
-#define	CMD_SCAN_PROBE_DELAY_TIME	0
+#define CMD_SCAN_PROBE_DELAY_TIME               0
 
 /* Define action or option for CMD_MAC_CONTROL */
-#define CMD_ACT_MAC_RX_ON			0x0001
-#define CMD_ACT_MAC_TX_ON			0x0002
-#define CMD_ACT_MAC_LOOPBACK_ON			0x0004
-#define CMD_ACT_MAC_WEP_ENABLE			0x0008
-#define CMD_ACT_MAC_INT_ENABLE			0x0010
-#define CMD_ACT_MAC_MULTICAST_ENABLE		0x0020
-#define CMD_ACT_MAC_BROADCAST_ENABLE		0x0040
-#define CMD_ACT_MAC_PROMISCUOUS_ENABLE		0x0080
-#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE	0x0100
-#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE	0x0400
+#define CMD_ACT_MAC_RX_ON                       0x0001
+#define CMD_ACT_MAC_TX_ON                       0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
+#define CMD_ACT_MAC_INT_ENABLE                  0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
 
 /* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
-#define CMD_SUBSCRIBE_RSSI_LOW		0x0001
-#define CMD_SUBSCRIBE_SNR_LOW		0x0002
-#define CMD_SUBSCRIBE_FAILCOUNT		0x0004
-#define CMD_SUBSCRIBE_BCNMISS		0x0008
-#define CMD_SUBSCRIBE_RSSI_HIGH		0x0010
-#define CMD_SUBSCRIBE_SNR_HIGH		0x0020
+#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
+#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
+#define CMD_SUBSCRIBE_BCNMISS                   0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
 
-#define RADIO_PREAMBLE_LONG	0x00
-#define RADIO_PREAMBLE_SHORT	0x02
-#define RADIO_PREAMBLE_AUTO	0x04
+#define RADIO_PREAMBLE_LONG                     0x00
+#define RADIO_PREAMBLE_SHORT                    0x02
+#define RADIO_PREAMBLE_AUTO                     0x04
 
 /* Define action or option for CMD_802_11_RF_CHANNEL */
-#define CMD_OPT_802_11_RF_CHANNEL_GET	0x00
-#define CMD_OPT_802_11_RF_CHANNEL_SET	0x01
+#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
 
 /* Define action or option for CMD_802_11_DATA_RATE */
-#define CMD_ACT_SET_TX_AUTO		0x0000
-#define CMD_ACT_SET_TX_FIX_RATE		0x0001
-#define CMD_ACT_GET_TX_RATE		0x0002
-
-#define CMD_ACT_SET_RX			0x0001
-#define	CMD_ACT_SET_TX			0x0002
-#define CMD_ACT_SET_BOTH		0x0003
-#define	CMD_ACT_GET_RX			0x0004
-#define CMD_ACT_GET_TX			0x0008
-#define	CMD_ACT_GET_BOTH		0x000c
+#define CMD_ACT_SET_TX_AUTO                     0x0000
+#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
+#define CMD_ACT_GET_TX_RATE                     0x0002
 
 /* Define action or option for CMD_802_11_PS_MODE */
-#define CMD_TYPE_CAM			0x0000
-#define	CMD_TYPE_MAX_PSP		0x0001
-#define CMD_TYPE_FAST_PSP		0x0002
+#define CMD_TYPE_CAM                            0x0000
+#define CMD_TYPE_MAX_PSP                        0x0001
+#define CMD_TYPE_FAST_PSP                       0x0002
 
 /* Options for CMD_802_11_FW_WAKE_METHOD */
-#define CMD_WAKE_METHOD_UNCHANGED	0x0000
-#define CMD_WAKE_METHOD_COMMAND_INT	0x0001
-#define CMD_WAKE_METHOD_GPIO		0x0002
+#define CMD_WAKE_METHOD_UNCHANGED               0x0000
+#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
+#define CMD_WAKE_METHOD_GPIO                    0x0002
 
 /* Object IDs for CMD_802_11_SNMP_MIB */
-#define SNMP_MIB_OID_BSS_TYPE		0x0000
-#define SNMP_MIB_OID_OP_RATE_SET	0x0001
-#define SNMP_MIB_OID_BEACON_PERIOD	0x0002  /* Reserved on v9+ */
-#define SNMP_MIB_OID_DTIM_PERIOD	0x0003  /* Reserved on v9+ */
-#define SNMP_MIB_OID_ASSOC_TIMEOUT	0x0004  /* Reserved on v9+ */
-#define SNMP_MIB_OID_RTS_THRESHOLD	0x0005
-#define SNMP_MIB_OID_SHORT_RETRY_LIMIT	0x0006
-#define SNMP_MIB_OID_LONG_RETRY_LIMIT	0x0007
-#define SNMP_MIB_OID_FRAG_THRESHOLD	0x0008
-#define SNMP_MIB_OID_11D_ENABLE		0x0009
-#define SNMP_MIB_OID_11H_ENABLE		0x000A
+#define SNMP_MIB_OID_BSS_TYPE                   0x0000
+#define SNMP_MIB_OID_OP_RATE_SET                0x0001
+#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
+#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
+#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
+#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
+#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
+#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
+#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
+#define SNMP_MIB_OID_11D_ENABLE                 0x0009
+#define SNMP_MIB_OID_11H_ENABLE                 0x000A
 
 /* Define action or option for CMD_BT_ACCESS */
 enum cmd_bt_access_opts {
@@ -302,4 +291,672 @@
 #define MACREG_INT_CODE_MESH_AUTO_STARTED	35
 #define MACREG_INT_CODE_FIRMWARE_READY		48
 
+
+/* 802.11-related definitions */
+
+/* TxPD descriptor */
+struct txpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Tx packet status */
+		__le32 tx_status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+			/* Reserved */
+			__le16 reserved;
+		} bss;
+	} u;
+	/* Tx control */
+	__le32 tx_control;
+	__le32 tx_packet_location;
+	/* Tx packet length */
+	__le16 tx_packet_length;
+	/* First 2 byte of destination MAC address */
+	u8 tx_dest_addr_high[2];
+	/* Last 4 byte of destination MAC address */
+	u8 tx_dest_addr_low[4];
+	/* Pkt Priority */
+	u8 priority;
+	/* Pkt Trasnit Power control */
+	u8 powermgmt;
+	/* Amount of time the packet has been queued (units = 2ms) */
+	u8 pktdelay_2ms;
+	/* reserved */
+	u8 reserved1;
+} __attribute__ ((packed));
+
+/* RxPD Descriptor */
+struct rxpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Rx packet status */
+		__le16 status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+		} __attribute__ ((packed)) bss;
+	} __attribute__ ((packed)) u;
+
+	/* SNR */
+	u8 snr;
+
+	/* Tx control */
+	u8 rx_control;
+
+	/* Pkt length */
+	__le16 pkt_len;
+
+	/* Noise Floor */
+	u8 nf;
+
+	/* Rx Packet Rate */
+	u8 rx_rate;
+
+	/* Pkt addr */
+	__le32 pkt_ptr;
+
+	/* Next Rx RxPD addr */
+	__le32 next_rxpd_ptr;
+
+	/* Pkt Priority */
+	u8 priority;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_header {
+	__le16 command;
+	__le16 size;
+	__le16 seqnum;
+	__le16 result;
+} __attribute__ ((packed));
+
+/* Generic structure to hold all key types. */
+struct enc_key {
+	u16 len;
+	u16 flags;  /* KEY_INFO_* from defs.h */
+	u16 type; /* KEY_TYPE_* from defs.h */
+	u8 key[32];
+};
+
+/* lbs_offset_value */
+struct lbs_offset_value {
+	u32 offset;
+	u32 value;
+} __attribute__ ((packed));
+
+/*
+ * Define data structure for CMD_GET_HW_SPEC
+ * This structure defines the response for the GET_HW_SPEC command
+ */
+struct cmd_ds_get_hw_spec {
+	struct cmd_header hdr;
+
+	/* HW Interface version number */
+	__le16 hwifversion;
+	/* HW version number */
+	__le16 version;
+	/* Max number of TxPD FW can handle */
+	__le16 nr_txpd;
+	/* Max no of Multicast address */
+	__le16 nr_mcast_adr;
+	/* MAC address */
+	u8 permanentaddr[6];
+
+	/* region Code */
+	__le16 regioncode;
+
+	/* Number of antenna used */
+	__le16 nr_antenna;
+
+	/* FW release number, example 0x01030304 = 2.3.4p1 */
+	__le32 fwrelease;
+
+	/* Base Address of TxPD queue */
+	__le32 wcb_base;
+	/* Read Pointer of RxPd queue */
+	__le32 rxpd_rdptr;
+
+	/* Write Pointer of RxPd queue */
+	__le32 rxpd_wrptr;
+
+	/*FW/HW capability */
+	__le32 fwcapinfo;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_subscribe_event {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 events;
+
+	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
+	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
+	 * 40 bytes. However, future firmware might add additional TLVs, so I
+	 * bump this up a bit.
+	 */
+	uint8_t tlv[128];
+} __attribute__ ((packed));
+
+/*
+ * This scan handle Country Information IE(802.11d compliant)
+ * Define data structure for CMD_802_11_SCAN
+ */
+struct cmd_ds_802_11_scan {
+	struct cmd_header hdr;
+
+	uint8_t bsstype;
+	uint8_t bssid[ETH_ALEN];
+	uint8_t tlvbuffer[0];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_scan_rsp {
+	struct cmd_header hdr;
+
+	__le16 bssdescriptsize;
+	uint8_t nr_sets;
+	uint8_t bssdesc_and_tlvbuffer[0];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_get_log {
+	struct cmd_header hdr;
+
+	__le32 mcasttxframe;
+	__le32 failed;
+	__le32 retry;
+	__le32 multiretry;
+	__le32 framedup;
+	__le32 rtssuccess;
+	__le32 rtsfailure;
+	__le32 ackfailure;
+	__le32 rxfrag;
+	__le32 mcastrxframe;
+	__le32 fcserror;
+	__le32 txframe;
+	__le32 wepundecryptable;
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_control {
+	struct cmd_header hdr;
+	__le16 action;
+	u16 reserved;
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_multicast_adr {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 nr_of_adrs;
+	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_authenticate {
+	struct cmd_header hdr;
+
+	u8 bssid[ETH_ALEN];
+	u8 authtype;
+	u8 reserved[10];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_deauthenticate {
+	struct cmd_header hdr;
+
+	u8 macaddr[ETH_ALEN];
+	__le16 reasoncode;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_associate {
+	struct cmd_header hdr;
+
+	u8 bssid[6];
+	__le16 capability;
+	__le16 listeninterval;
+	__le16 bcnperiod;
+	u8 dtimperiod;
+	u8 iebuf[512];    /* Enough for required and most optional IEs */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_associate_response {
+	struct cmd_header hdr;
+
+	__le16 capability;
+	__le16 statuscode;
+	__le16 aid;
+	u8 iebuf[512];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_set_wep {
+	struct cmd_header hdr;
+
+	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
+	__le16 action;
+
+	/* key Index selected for Tx */
+	__le16 keyindex;
+
+	/* 40, 128bit or TXWEP */
+	uint8_t keytype[4];
+	uint8_t keymaterial[4][16];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_snmp_mib {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 oid;
+	__le16 bufsize;
+	u8 value[128];
+} __attribute__ ((packed));
+
+struct cmd_ds_mac_reg_access {
+	__le16 action;
+	__le16 offset;
+	__le32 value;
+} __attribute__ ((packed));
+
+struct cmd_ds_bbp_reg_access {
+	__le16 action;
+	__le16 offset;
+	u8 value;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_ds_rf_reg_access {
+	__le16 action;
+	__le16 offset;
+	u8 value;
+	u8 reserved[3];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_radio_control {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 control;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_beacon_control {
+	__le16 action;
+	__le16 beacon_enable;
+	__le16 beacon_period;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_sleep_params {
+	struct cmd_header hdr;
+
+	/* ACT_GET/ACT_SET */
+	__le16 action;
+
+	/* Sleep clock error in ppm */
+	__le16 error;
+
+	/* Wakeup offset in usec */
+	__le16 offset;
+
+	/* Clock stabilization time in usec */
+	__le16 stabletime;
+
+	/* control periodic calibration */
+	uint8_t calcontrol;
+
+	/* control the use of external sleep clock */
+	uint8_t externalsleepclk;
+
+	/* reserved field, should be set to zero */
+	__le16 reserved;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rf_channel {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 rftype;      /* unused */
+	__le16 reserved;    /* unused */
+	u8 channellist[32]; /* unused */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rssi {
+	/* weighting factor */
+	__le16 N;
+
+	__le16 reserved_0;
+	__le16 reserved_1;
+	__le16 reserved_2;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rssi_rsp {
+	__le16 SNR;
+	__le16 noisefloor;
+	__le16 avgSNR;
+	__le16 avgnoisefloor;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_mac_address {
+	struct cmd_header hdr;
+
+	__le16 action;
+	u8 macadd[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rf_tx_power {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 curlevel;
+	s8 maxlevel;
+	s8 minlevel;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_monitor_mode {
+	__le16 action;
+	__le16 mode;
+} __attribute__ ((packed));
+
+struct cmd_ds_set_boot2_ver {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 version;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_fw_wake_method {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 method;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ps_mode {
+	__le16 action;
+	__le16 nullpktinterval;
+	__le16 multipledtim;
+	__le16 reserved;
+	__le16 locallisteninterval;
+} __attribute__ ((packed));
+
+struct cmd_confirm_sleep {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 nullpktinterval;
+	__le16 multipledtim;
+	__le16 reserved;
+	__le16 locallisteninterval;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_data_rate {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 reserved;
+	u8 rates[MAX_RATES];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_rate_adapt_rateset {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 enablehwauto;
+	__le16 bitmap;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_start {
+	struct cmd_header hdr;
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 bsstype;
+	__le16 beaconperiod;
+	u8 dtimperiod;   /* Reserved on v9 and later */
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved1[4];
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved2[4];
+	__le16 probedelay;  /* Reserved on v9 and later */
+	__le16 capability;
+	u8 rates[MAX_RATES];
+	u8 tlv_memory_size_pad[100];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_result {
+	struct cmd_header hdr;
+
+	u8 pad[3];
+	u8 bssid[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct adhoc_bssdesc {
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 type;
+	__le16 beaconperiod;
+	u8 dtimperiod;
+	__le64 timestamp;
+	__le64 localtime;
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved1[4];
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved2[4];
+	__le16 capability;
+	u8 rates[MAX_RATES];
+
+	/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+	 * Adhoc join command and will cause a binary layout mismatch with
+	 * the firmware
+	 */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_join {
+	struct cmd_header hdr;
+
+	struct adhoc_bssdesc bss;
+	__le16 failtimeout;   /* Reserved on v9 and later */
+	__le16 probedelay;    /* Reserved on v9 and later */
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_ad_hoc_stop {
+	struct cmd_header hdr;
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_enable_rsn {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 enable;
+} __attribute__ ((packed));
+
+struct MrvlIEtype_keyParamSet {
+	/* type ID */
+	__le16 type;
+
+	/* length of Payload */
+	__le16 length;
+
+	/* type of key: WEP=0, TKIP=1, AES=2 */
+	__le16 keytypeid;
+
+	/* key control Info specific to a keytypeid */
+	__le16 keyinfo;
+
+	/* length of key */
+	__le16 keylen;
+
+	/* key material of size keylen */
+	u8 key[32];
+} __attribute__ ((packed));
+
+#define MAX_WOL_RULES 		16
+
+struct host_wol_rule {
+	uint8_t rule_no;
+	uint8_t rule_ops;
+	__le16 sig_offset;
+	__le16 sig_length;
+	__le16 reserve;
+	__be32 sig_mask;
+	__be32 signature;
+} __attribute__ ((packed));
+
+struct wol_config {
+	uint8_t action;
+	uint8_t pattern;
+	uint8_t no_rules_in_cmd;
+	uint8_t result;
+	struct host_wol_rule rule[MAX_WOL_RULES];
+} __attribute__ ((packed));
+
+struct cmd_ds_host_sleep {
+	struct cmd_header hdr;
+	__le32 criteria;
+	uint8_t gpio;
+	uint16_t gap;
+	struct wol_config wol_conf;
+} __attribute__ ((packed));
+
+
+
+struct cmd_ds_802_11_key_material {
+	struct cmd_header hdr;
+
+	__le16 action;
+	struct MrvlIEtype_keyParamSet keyParamSet[2];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_eeprom_access {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 offset;
+	__le16 len;
+	/* firmware says it returns a maximum of 20 bytes */
+#define LBS_EEPROM_READ_LEN 20
+	u8 value[LBS_EEPROM_READ_LEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_tpc_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+	uint8_t usesnr;
+} __attribute__ ((packed));
+
+
+struct cmd_ds_802_11_pa_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+} __attribute__ ((packed));
+
+
+struct cmd_ds_802_11_led_ctrl {
+	__le16 action;
+	__le16 numled;
+	u8 data[256];
+} __attribute__ ((packed));
+
+struct cmd_ds_802_11_afc {
+	__le16 afc_auto;
+	union {
+		struct {
+			__le16 threshold;
+			__le16 period;
+		};
+		struct {
+			__le16 timing_offset; /* signed */
+			__le16 carrier_offset; /* signed */
+		};
+	};
+} __attribute__ ((packed));
+
+struct cmd_tx_rate_query {
+	__le16 txrate;
+} __attribute__ ((packed));
+
+struct cmd_ds_get_tsf {
+	__le64 tsfvalue;
+} __attribute__ ((packed));
+
+struct cmd_ds_bt_access {
+	__le16 action;
+	__le32 id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_fwt_access {
+	__le16 action;
+	__le32 id;
+	u8 valid;
+	u8 da[ETH_ALEN];
+	u8 dir;
+	u8 ra[ETH_ALEN];
+	__le32 ssn;
+	__le32 dsn;
+	__le32 metric;
+	u8 rate;
+	u8 hopcount;
+	u8 ttl;
+	__le32 expiration;
+	u8 sleepmode;
+	__le32 snr;
+	__le32 references;
+	u8 prec[ETH_ALEN];
+} __attribute__ ((packed));
+
+struct cmd_ds_mesh_config {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 type;
+	__le16 length;
+	u8 data[128];	/* last position reserved */
+} __attribute__ ((packed));
+
+struct cmd_ds_mesh_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le32 data[32];	/* last position reserved */
+} __attribute__ ((packed));
+
+/* Number of stats counters returned by the firmware */
+#define MESH_STATS_NUM 8
+
+struct cmd_ds_command {
+	/* command header */
+	__le16 command;
+	__le16 size;
+	__le16 seqnum;
+	__le16 result;
+
+	/* command Body */
+	union {
+		struct cmd_ds_802_11_ps_mode psmode;
+		struct cmd_ds_802_11_monitor_mode monitor;
+		struct cmd_ds_802_11_rssi rssi;
+		struct cmd_ds_802_11_rssi_rsp rssirsp;
+		struct cmd_ds_mac_reg_access macreg;
+		struct cmd_ds_bbp_reg_access bbpreg;
+		struct cmd_ds_rf_reg_access rfreg;
+
+		struct cmd_ds_802_11_tpc_cfg tpccfg;
+		struct cmd_ds_802_11_afc afc;
+		struct cmd_ds_802_11_led_ctrl ledgpio;
+
+		struct cmd_ds_bt_access bt;
+		struct cmd_ds_fwt_access fwt;
+		struct cmd_ds_802_11_beacon_control bcn_ctrl;
+	} params;
+} __attribute__ ((packed));
+
 #endif
diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h
deleted file mode 100644
index c8a1998..0000000
--- a/drivers/net/wireless/libertas/hostcmd.h
+++ /dev/null
@@ -1,800 +0,0 @@
-/*
- * This file contains the function prototypes, data structure
- * and defines for all the host/station commands
- */
-#ifndef _LBS_HOSTCMD_H
-#define _LBS_HOSTCMD_H
-
-#include <linux/wireless.h>
-#include "11d.h"
-#include "types.h"
-
-/* 802.11-related definitions */
-
-/* TxPD descriptor */
-struct txpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Tx packet status */
-		__le32 tx_status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-			/* Reserved */
-			__le16 reserved;
-		} bss;
-	} u;
-	/* Tx control */
-	__le32 tx_control;
-	__le32 tx_packet_location;
-	/* Tx packet length */
-	__le16 tx_packet_length;
-	/* First 2 byte of destination MAC address */
-	u8 tx_dest_addr_high[2];
-	/* Last 4 byte of destination MAC address */
-	u8 tx_dest_addr_low[4];
-	/* Pkt Priority */
-	u8 priority;
-	/* Pkt Trasnit Power control */
-	u8 powermgmt;
-	/* Amount of time the packet has been queued in the driver (units = 2ms) */
-	u8 pktdelay_2ms;
-	/* reserved */
-	u8 reserved1;
-} __attribute__ ((packed));
-
-/* RxPD Descriptor */
-struct rxpd {
-	/* union to cope up with later FW revisions */
-	union {
-		/* Current Rx packet status */
-		__le16 status;
-		struct {
-			/* BSS type: client, AP, etc. */
-			u8 bss_type;
-			/* BSS number */
-			u8 bss_num;
-		} __attribute__ ((packed)) bss;
-	} __attribute__ ((packed)) u;
-
-	/* SNR */
-	u8 snr;
-
-	/* Tx control */
-	u8 rx_control;
-
-	/* Pkt length */
-	__le16 pkt_len;
-
-	/* Noise Floor */
-	u8 nf;
-
-	/* Rx Packet Rate */
-	u8 rx_rate;
-
-	/* Pkt addr */
-	__le32 pkt_ptr;
-
-	/* Next Rx RxPD addr */
-	__le32 next_rxpd_ptr;
-
-	/* Pkt Priority */
-	u8 priority;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_header {
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-} __attribute__ ((packed));
-
-struct cmd_ctrl_node {
-	struct list_head list;
-	int result;
-	/* command response */
-	int (*callback)(struct lbs_private *, unsigned long, struct cmd_header *);
-	unsigned long callback_arg;
-	/* command data */
-	struct cmd_header *cmdbuf;
-	/* wait queue */
-	u16 cmdwaitqwoken;
-	wait_queue_head_t cmdwait_q;
-};
-
-/* Generic structure to hold all key types. */
-struct enc_key {
-	u16 len;
-	u16 flags;  /* KEY_INFO_* from defs.h */
-	u16 type; /* KEY_TYPE_* from defs.h */
-	u8 key[32];
-};
-
-/* lbs_offset_value */
-struct lbs_offset_value {
-	u32 offset;
-	u32 value;
-} __attribute__ ((packed));
-
-/* Define general data structure */
-/* cmd_DS_GEN */
-struct cmd_ds_gen {
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-	void *cmdresp[0];
-} __attribute__ ((packed));
-
-#define S_DS_GEN sizeof(struct cmd_ds_gen)
-
-
-/*
- * Define data structure for CMD_GET_HW_SPEC
- * This structure defines the response for the GET_HW_SPEC command
- */
-struct cmd_ds_get_hw_spec {
-	struct cmd_header hdr;
-
-	/* HW Interface version number */
-	__le16 hwifversion;
-	/* HW version number */
-	__le16 version;
-	/* Max number of TxPD FW can handle */
-	__le16 nr_txpd;
-	/* Max no of Multicast address */
-	__le16 nr_mcast_adr;
-	/* MAC address */
-	u8 permanentaddr[6];
-
-	/* region Code */
-	__le16 regioncode;
-
-	/* Number of antenna used */
-	__le16 nr_antenna;
-
-	/* FW release number, example 0x01030304 = 2.3.4p1 */
-	__le32 fwrelease;
-
-	/* Base Address of TxPD queue */
-	__le32 wcb_base;
-	/* Read Pointer of RxPd queue */
-	__le32 rxpd_rdptr;
-
-	/* Write Pointer of RxPd queue */
-	__le32 rxpd_wrptr;
-
-	/*FW/HW capability */
-	__le32 fwcapinfo;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_subscribe_event {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 events;
-
-	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
-	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
-	 * 40 bytes. However, future firmware might add additional TLVs, so I
-	 * bump this up a bit.
-	 */
-	uint8_t tlv[128];
-} __attribute__ ((packed));
-
-/*
- * This scan handle Country Information IE(802.11d compliant)
- * Define data structure for CMD_802_11_SCAN
- */
-struct cmd_ds_802_11_scan {
-	struct cmd_header hdr;
-
-	uint8_t bsstype;
-	uint8_t bssid[ETH_ALEN];
-	uint8_t tlvbuffer[0];
-#if 0
-	mrvlietypes_ssidparamset_t ssidParamSet;
-	mrvlietypes_chanlistparamset_t ChanListParamSet;
-	mrvlietypes_ratesparamset_t OpRateSet;
-#endif
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_scan_rsp {
-	struct cmd_header hdr;
-
-	__le16 bssdescriptsize;
-	uint8_t nr_sets;
-	uint8_t bssdesc_and_tlvbuffer[0];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_get_log {
-	struct cmd_header hdr;
-
-	__le32 mcasttxframe;
-	__le32 failed;
-	__le32 retry;
-	__le32 multiretry;
-	__le32 framedup;
-	__le32 rtssuccess;
-	__le32 rtsfailure;
-	__le32 ackfailure;
-	__le32 rxfrag;
-	__le32 mcastrxframe;
-	__le32 fcserror;
-	__le32 txframe;
-	__le32 wepundecryptable;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_control {
-	struct cmd_header hdr;
-	__le16 action;
-	u16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_multicast_adr {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 nr_of_adrs;
-	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
-} __attribute__ ((packed));
-
-struct cmd_ds_gspi_bus_config {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 bus_delay_mode;
-	__le16 host_time_delay_to_read_port;
-	__le16 host_time_delay_to_read_register;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_authenticate {
-	struct cmd_header hdr;
-
-	u8 bssid[ETH_ALEN];
-	u8 authtype;
-	u8 reserved[10];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_deauthenticate {
-	struct cmd_header hdr;
-
-	u8 macaddr[ETH_ALEN];
-	__le16 reasoncode;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_associate {
-	struct cmd_header hdr;
-
-	u8 bssid[6];
-	__le16 capability;
-	__le16 listeninterval;
-	__le16 bcnperiod;
-	u8 dtimperiod;
-	u8 iebuf[512];    /* Enough for required and most optional IEs */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_associate_response {
-	struct cmd_header hdr;
-
-	__le16 capability;
-	__le16 statuscode;
-	__le16 aid;
-	u8 iebuf[512];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_set_wep {
-	struct cmd_header hdr;
-
-	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
-	__le16 action;
-
-	/* key Index selected for Tx */
-	__le16 keyindex;
-
-	/* 40, 128bit or TXWEP */
-	uint8_t keytype[4];
-	uint8_t keymaterial[4][16];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_3_get_stat {
-	__le32 xmitok;
-	__le32 rcvok;
-	__le32 xmiterror;
-	__le32 rcverror;
-	__le32 rcvnobuffer;
-	__le32 rcvcrcerror;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_get_stat {
-	__le32 txfragmentcnt;
-	__le32 mcasttxframecnt;
-	__le32 failedcnt;
-	__le32 retrycnt;
-	__le32 Multipleretrycnt;
-	__le32 rtssuccesscnt;
-	__le32 rtsfailurecnt;
-	__le32 ackfailurecnt;
-	__le32 frameduplicatecnt;
-	__le32 rxfragmentcnt;
-	__le32 mcastrxframecnt;
-	__le32 fcserrorcnt;
-	__le32 bcasttxframecnt;
-	__le32 bcastrxframecnt;
-	__le32 txbeacon;
-	__le32 rxbeacon;
-	__le32 wepundecryptable;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_snmp_mib {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 oid;
-	__le16 bufsize;
-	u8 value[128];
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_reg_map {
-	__le16 buffersize;
-	u8 regmap[128];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_bbp_reg_map {
-	__le16 buffersize;
-	u8 regmap[128];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_rf_reg_map {
-	__le16 buffersize;
-	u8 regmap[64];
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_mac_reg_access {
-	__le16 action;
-	__le16 offset;
-	__le32 value;
-} __attribute__ ((packed));
-
-struct cmd_ds_bbp_reg_access {
-	__le16 action;
-	__le16 offset;
-	u8 value;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_ds_rf_reg_access {
-	__le16 action;
-	__le16 offset;
-	u8 value;
-	u8 reserved[3];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_radio_control {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 control;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_beacon_control {
-	__le16 action;
-	__le16 beacon_enable;
-	__le16 beacon_period;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_sleep_params {
-	struct cmd_header hdr;
-
-	/* ACT_GET/ACT_SET */
-	__le16 action;
-
-	/* Sleep clock error in ppm */
-	__le16 error;
-
-	/* Wakeup offset in usec */
-	__le16 offset;
-
-	/* Clock stabilization time in usec */
-	__le16 stabletime;
-
-	/* control periodic calibration */
-	uint8_t calcontrol;
-
-	/* control the use of external sleep clock */
-	uint8_t externalsleepclk;
-
-	/* reserved field, should be set to zero */
-	__le16 reserved;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_inactivity_timeout {
-	struct cmd_header hdr;
-
-	/* ACT_GET/ACT_SET */
-	__le16 action;
-
-	/* Inactivity timeout in msec */
-	__le16 timeout;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_channel {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 channel;
-	__le16 rftype;      /* unused */
-	__le16 reserved;    /* unused */
-	u8 channellist[32]; /* unused */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rssi {
-	/* weighting factor */
-	__le16 N;
-
-	__le16 reserved_0;
-	__le16 reserved_1;
-	__le16 reserved_2;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rssi_rsp {
-	__le16 SNR;
-	__le16 noisefloor;
-	__le16 avgSNR;
-	__le16 avgnoisefloor;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_mac_address {
-	struct cmd_header hdr;
-
-	__le16 action;
-	u8 macadd[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_tx_power {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 curlevel;
-	s8 maxlevel;
-	s8 minlevel;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rf_antenna {
-	__le16 action;
-
-	/* Number of antennas or 0xffff(diversity) */
-	__le16 antennamode;
-
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_monitor_mode {
-	__le16 action;
-	__le16 mode;
-} __attribute__ ((packed));
-
-struct cmd_ds_set_boot2_ver {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 version;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_fw_wake_method {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 method;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_sleep_period {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 period;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ps_mode {
-	__le16 action;
-	__le16 nullpktinterval;
-	__le16 multipledtim;
-	__le16 reserved;
-	__le16 locallisteninterval;
-} __attribute__ ((packed));
-
-struct cmd_confirm_sleep {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 nullpktinterval;
-	__le16 multipledtim;
-	__le16 reserved;
-	__le16 locallisteninterval;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_data_rate {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 reserved;
-	u8 rates[MAX_RATES];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_rate_adapt_rateset {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 enablehwauto;
-	__le16 bitmap;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_start {
-	struct cmd_header hdr;
-
-	u8 ssid[IW_ESSID_MAX_SIZE];
-	u8 bsstype;
-	__le16 beaconperiod;
-	u8 dtimperiod;   /* Reserved on v9 and later */
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved1[4];
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved2[4];
-	__le16 probedelay;  /* Reserved on v9 and later */
-	__le16 capability;
-	u8 rates[MAX_RATES];
-	u8 tlv_memory_size_pad[100];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_result {
-	struct cmd_header hdr;
-
-	u8 pad[3];
-	u8 bssid[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct adhoc_bssdesc {
-	u8 bssid[ETH_ALEN];
-	u8 ssid[IW_ESSID_MAX_SIZE];
-	u8 type;
-	__le16 beaconperiod;
-	u8 dtimperiod;
-	__le64 timestamp;
-	__le64 localtime;
-	struct ieee_ie_ds_param_set ds;
-	u8 reserved1[4];
-	struct ieee_ie_ibss_param_set ibss;
-	u8 reserved2[4];
-	__le16 capability;
-	u8 rates[MAX_RATES];
-
-	/* DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
-	 * Adhoc join command and will cause a binary layout mismatch with
-	 * the firmware
-	 */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_join {
-	struct cmd_header hdr;
-
-	struct adhoc_bssdesc bss;
-	__le16 failtimeout;   /* Reserved on v9 and later */
-	__le16 probedelay;    /* Reserved on v9 and later */
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_ad_hoc_stop {
-	struct cmd_header hdr;
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_enable_rsn {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le16 enable;
-} __attribute__ ((packed));
-
-struct MrvlIEtype_keyParamSet {
-	/* type ID */
-	__le16 type;
-
-	/* length of Payload */
-	__le16 length;
-
-	/* type of key: WEP=0, TKIP=1, AES=2 */
-	__le16 keytypeid;
-
-	/* key control Info specific to a keytypeid */
-	__le16 keyinfo;
-
-	/* length of key */
-	__le16 keylen;
-
-	/* key material of size keylen */
-	u8 key[32];
-} __attribute__ ((packed));
-
-#define MAX_WOL_RULES 		16
-
-struct host_wol_rule {
-	uint8_t rule_no;
-	uint8_t rule_ops;
-	__le16 sig_offset;
-	__le16 sig_length;
-	__le16 reserve;
-	__be32 sig_mask;
-	__be32 signature;
-} __attribute__ ((packed));
-
-struct wol_config {
-	uint8_t action;
-	uint8_t pattern;
-	uint8_t no_rules_in_cmd;
-	uint8_t result;
-	struct host_wol_rule rule[MAX_WOL_RULES];
-} __attribute__ ((packed));
-
-struct cmd_ds_host_sleep {
-	struct cmd_header hdr;
-	__le32 criteria;
-	uint8_t gpio;
-	uint16_t gap;
-	struct wol_config wol_conf;
-} __attribute__ ((packed));
-
-
-
-struct cmd_ds_802_11_key_material {
-	struct cmd_header hdr;
-
-	__le16 action;
-	struct MrvlIEtype_keyParamSet keyParamSet[2];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_eeprom_access {
-	struct cmd_header hdr;
-	__le16 action;
-	__le16 offset;
-	__le16 len;
-	/* firmware says it returns a maximum of 20 bytes */
-#define LBS_EEPROM_READ_LEN 20
-	u8 value[LBS_EEPROM_READ_LEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_tpc_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-	uint8_t usesnr;
-} __attribute__ ((packed));
-
-
-struct cmd_ds_802_11_pa_cfg {
-	struct cmd_header hdr;
-
-	__le16 action;
-	uint8_t enable;
-	int8_t P0;
-	int8_t P1;
-	int8_t P2;
-} __attribute__ ((packed));
-
-
-struct cmd_ds_802_11_led_ctrl {
-	__le16 action;
-	__le16 numled;
-	u8 data[256];
-} __attribute__ ((packed));
-
-struct cmd_ds_802_11_afc {
-	__le16 afc_auto;
-	union {
-		struct {
-			__le16 threshold;
-			__le16 period;
-		};
-		struct {
-			__le16 timing_offset; /* signed */
-			__le16 carrier_offset; /* signed */
-		};
-	};
-} __attribute__ ((packed));
-
-struct cmd_tx_rate_query {
-	__le16 txrate;
-} __attribute__ ((packed));
-
-struct cmd_ds_get_tsf {
-	__le64 tsfvalue;
-} __attribute__ ((packed));
-
-struct cmd_ds_bt_access {
-	__le16 action;
-	__le32 id;
-	u8 addr1[ETH_ALEN];
-	u8 addr2[ETH_ALEN];
-} __attribute__ ((packed));
-
-struct cmd_ds_fwt_access {
-	__le16 action;
-	__le32 id;
-	u8 valid;
-	u8 da[ETH_ALEN];
-	u8 dir;
-	u8 ra[ETH_ALEN];
-	__le32 ssn;
-	__le32 dsn;
-	__le32 metric;
-	u8 rate;
-	u8 hopcount;
-	u8 ttl;
-	__le32 expiration;
-	u8 sleepmode;
-	__le32 snr;
-	__le32 references;
-	u8 prec[ETH_ALEN];
-} __attribute__ ((packed));
-
-
-struct cmd_ds_mesh_config {
-	struct cmd_header hdr;
-
-        __le16 action;
-        __le16 channel;
-        __le16 type;
-        __le16 length;
-        u8 data[128];   /* last position reserved */
-} __attribute__ ((packed));
-
-
-struct cmd_ds_mesh_access {
-	struct cmd_header hdr;
-
-	__le16 action;
-	__le32 data[32];	/* last position reserved */
-} __attribute__ ((packed));
-
-/* Number of stats counters returned by the firmware */
-#define MESH_STATS_NUM 8
-
-struct cmd_ds_command {
-	/* command header */
-	__le16 command;
-	__le16 size;
-	__le16 seqnum;
-	__le16 result;
-
-	/* command Body */
-	union {
-		struct cmd_ds_802_11_ps_mode psmode;
-		struct cmd_ds_802_11_get_stat gstat;
-		struct cmd_ds_802_3_get_stat gstat_8023;
-		struct cmd_ds_802_11_rf_antenna rant;
-		struct cmd_ds_802_11_monitor_mode monitor;
-		struct cmd_ds_802_11_rssi rssi;
-		struct cmd_ds_802_11_rssi_rsp rssirsp;
-		struct cmd_ds_mac_reg_access macreg;
-		struct cmd_ds_bbp_reg_access bbpreg;
-		struct cmd_ds_rf_reg_access rfreg;
-
-		struct cmd_ds_802_11d_domain_info domaininfo;
-		struct cmd_ds_802_11d_domain_info domaininforesp;
-
-		struct cmd_ds_802_11_tpc_cfg tpccfg;
-		struct cmd_ds_802_11_afc afc;
-		struct cmd_ds_802_11_led_ctrl ledgpio;
-
-		struct cmd_tx_rate_query txrate;
-		struct cmd_ds_bt_access bt;
-		struct cmd_ds_fwt_access fwt;
-		struct cmd_ds_get_tsf gettsf;
-		struct cmd_ds_802_11_beacon_control bcn_ctrl;
-	} params;
-} __attribute__ ((packed));
-
-#endif
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index 6238176..465742f 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -946,6 +946,9 @@
 	card->priv = priv;
 	priv->card = card;
 	priv->hw_host_to_card = if_cs_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 	priv->fw_ready = 1;
 
 	/* Now actually get the IRQ */
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 485a8d40..9716728 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -831,6 +831,58 @@
 	return ret;
 }
 
+static int if_sdio_enter_deep_sleep(struct lbs_private *priv)
+{
+	int ret = -1;
+	struct cmd_header cmd;
+
+	memset(&cmd, 0, sizeof(cmd));
+
+	lbs_deb_sdio("send DEEP_SLEEP command\n");
+	ret = __lbs_cmd(priv, CMD_802_11_DEEP_SLEEP, &cmd, sizeof(cmd),
+			lbs_cmd_copyback, (unsigned long) &cmd);
+	if (ret)
+		lbs_pr_err("DEEP_SLEEP cmd failed\n");
+
+	mdelay(200);
+	return ret;
+}
+
+static int if_sdio_exit_deep_sleep(struct lbs_private *priv)
+{
+	struct if_sdio_card *card = priv->card;
+	int ret = -1;
+
+	lbs_deb_enter(LBS_DEB_SDIO);
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, HOST_POWER_UP, CONFIGURATION_REG, &ret);
+	if (ret)
+		lbs_pr_err("sdio_writeb failed!\n");
+
+	sdio_release_host(card->func);
+	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+	return ret;
+}
+
+static int if_sdio_reset_deep_sleep_wakeup(struct lbs_private *priv)
+{
+	struct if_sdio_card *card = priv->card;
+	int ret = -1;
+
+	lbs_deb_enter(LBS_DEB_SDIO);
+	sdio_claim_host(card->func);
+
+	sdio_writeb(card->func, 0, CONFIGURATION_REG, &ret);
+	if (ret)
+		lbs_pr_err("sdio_writeb failed!\n");
+
+	sdio_release_host(card->func);
+	lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret);
+	return ret;
+
+}
+
 /*******************************************************************/
 /* SDIO callbacks                                                  */
 /*******************************************************************/
@@ -859,6 +911,7 @@
 	 * Ignore the define name, this really means the card has
 	 * successfully received the command.
 	 */
+	card->priv->is_activity_detected = 1;
 	if (cause & IF_SDIO_H_INT_DNLD)
 		lbs_host_to_card_done(card->priv);
 
@@ -998,6 +1051,9 @@
 
 	priv->card = card;
 	priv->hw_host_to_card = if_sdio_host_to_card;
+	priv->enter_deep_sleep = if_sdio_enter_deep_sleep;
+	priv->exit_deep_sleep = if_sdio_exit_deep_sleep;
+	priv->reset_deep_sleep_wakeup = if_sdio_reset_deep_sleep_wakeup;
 
 	priv->fw_ready = 1;
 
diff --git a/drivers/net/wireless/libertas/if_sdio.h b/drivers/net/wireless/libertas/if_sdio.h
index 60c9b2f..12179c1 100644
--- a/drivers/net/wireless/libertas/if_sdio.h
+++ b/drivers/net/wireless/libertas/if_sdio.h
@@ -51,5 +51,6 @@
 #define IF_SDIO_EVENT           0x80fc
 
 #define IF_SDIO_BLOCK_SIZE	256
-
+#define CONFIGURATION_REG               0x03
+#define HOST_POWER_UP                   (0x1U << 1)
 #endif
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 5b3672c..30d9d0e 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -1117,6 +1117,9 @@
 	card->priv = priv;
 	priv->card = card;
 	priv->hw_host_to_card = if_spi_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 	priv->fw_ready = 1;
 
 	/* Initialize interrupt handling stuff. */
diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c
index 3fac4ef..f12d667 100644
--- a/drivers/net/wireless/libertas/if_usb.c
+++ b/drivers/net/wireless/libertas/if_usb.c
@@ -300,6 +300,9 @@
 	cardp->priv->fw_ready = 1;
 
 	priv->hw_host_to_card = if_usb_host_to_card;
+	priv->enter_deep_sleep = NULL;
+	priv->exit_deep_sleep = NULL;
+	priv->reset_deep_sleep_wakeup = NULL;
 #ifdef CONFIG_OLPC
 	if (machine_is_olpc())
 		priv->reset_card = if_usb_reset_olpc_card;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 87b4e49..01f46cf 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -14,11 +14,13 @@
 #include <linux/stddef.h>
 #include <linux/ieee80211.h>
 #include <net/iw_handler.h>
+#include <net/cfg80211.h>
 
 #include "host.h"
 #include "decl.h"
 #include "dev.h"
 #include "wext.h"
+#include "cfg.h"
 #include "debugfs.h"
 #include "scan.h"
 #include "assoc.h"
@@ -43,119 +45,6 @@
 struct cmd_confirm_sleep confirm_sleep;
 
 
-#define LBS_TX_PWR_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_US_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_JP_DEFAULT		16	/*50mW */
-#define LBS_TX_PWR_FR_DEFAULT		20	/*100mW */
-#define LBS_TX_PWR_EMEA_DEFAULT	20	/*100mW */
-
-/* Format { channel, frequency (MHz), maxtxpower } */
-/* band: 'B/G', region: USA FCC/Canada IC */
-static struct chan_freq_power channel_freq_power_US_BG[] = {
-	{1, 2412, LBS_TX_PWR_US_DEFAULT},
-	{2, 2417, LBS_TX_PWR_US_DEFAULT},
-	{3, 2422, LBS_TX_PWR_US_DEFAULT},
-	{4, 2427, LBS_TX_PWR_US_DEFAULT},
-	{5, 2432, LBS_TX_PWR_US_DEFAULT},
-	{6, 2437, LBS_TX_PWR_US_DEFAULT},
-	{7, 2442, LBS_TX_PWR_US_DEFAULT},
-	{8, 2447, LBS_TX_PWR_US_DEFAULT},
-	{9, 2452, LBS_TX_PWR_US_DEFAULT},
-	{10, 2457, LBS_TX_PWR_US_DEFAULT},
-	{11, 2462, LBS_TX_PWR_US_DEFAULT}
-};
-
-/* band: 'B/G', region: Europe ETSI */
-static struct chan_freq_power channel_freq_power_EU_BG[] = {
-	{1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
-	{2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
-	{3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
-	{4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
-	{5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
-	{6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
-	{7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
-	{8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
-	{9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
-	{10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
-	{11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
-	{12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
-	{13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
-};
-
-/* band: 'B/G', region: Spain */
-static struct chan_freq_power channel_freq_power_SPN_BG[] = {
-	{10, 2457, LBS_TX_PWR_DEFAULT},
-	{11, 2462, LBS_TX_PWR_DEFAULT}
-};
-
-/* band: 'B/G', region: France */
-static struct chan_freq_power channel_freq_power_FR_BG[] = {
-	{10, 2457, LBS_TX_PWR_FR_DEFAULT},
-	{11, 2462, LBS_TX_PWR_FR_DEFAULT},
-	{12, 2467, LBS_TX_PWR_FR_DEFAULT},
-	{13, 2472, LBS_TX_PWR_FR_DEFAULT}
-};
-
-/* band: 'B/G', region: Japan */
-static struct chan_freq_power channel_freq_power_JPN_BG[] = {
-	{1, 2412, LBS_TX_PWR_JP_DEFAULT},
-	{2, 2417, LBS_TX_PWR_JP_DEFAULT},
-	{3, 2422, LBS_TX_PWR_JP_DEFAULT},
-	{4, 2427, LBS_TX_PWR_JP_DEFAULT},
-	{5, 2432, LBS_TX_PWR_JP_DEFAULT},
-	{6, 2437, LBS_TX_PWR_JP_DEFAULT},
-	{7, 2442, LBS_TX_PWR_JP_DEFAULT},
-	{8, 2447, LBS_TX_PWR_JP_DEFAULT},
-	{9, 2452, LBS_TX_PWR_JP_DEFAULT},
-	{10, 2457, LBS_TX_PWR_JP_DEFAULT},
-	{11, 2462, LBS_TX_PWR_JP_DEFAULT},
-	{12, 2467, LBS_TX_PWR_JP_DEFAULT},
-	{13, 2472, LBS_TX_PWR_JP_DEFAULT},
-	{14, 2484, LBS_TX_PWR_JP_DEFAULT}
-};
-
-/**
- * the structure for channel, frequency and power
- */
-struct region_cfp_table {
-	u8 region;
-	struct chan_freq_power *cfp_BG;
-	int cfp_no_BG;
-};
-
-/**
- * the structure for the mapping between region and CFP
- */
-static struct region_cfp_table region_cfp_table[] = {
-	{0x10,			/*US FCC */
-	 channel_freq_power_US_BG,
-	 ARRAY_SIZE(channel_freq_power_US_BG),
-	 }
-	,
-	{0x20,			/*CANADA IC */
-	 channel_freq_power_US_BG,
-	 ARRAY_SIZE(channel_freq_power_US_BG),
-	 }
-	,
-	{0x30, /*EU*/ channel_freq_power_EU_BG,
-	 ARRAY_SIZE(channel_freq_power_EU_BG),
-	 }
-	,
-	{0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
-	 ARRAY_SIZE(channel_freq_power_SPN_BG),
-	 }
-	,
-	{0x32, /*FRANCE*/ channel_freq_power_FR_BG,
-	 ARRAY_SIZE(channel_freq_power_FR_BG),
-	 }
-	,
-	{0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
-	 ARRAY_SIZE(channel_freq_power_JPN_BG),
-	 }
-	,
-/*Add new region here */
-};
-
 /**
  * the table to keep region code
  */
@@ -163,13 +52,6 @@
     { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
 
 /**
- * 802.11b/g supported bitrates (in 500Kb/s units)
- */
-u8 lbs_bg_rates[MAX_RATES] =
-    { 0x02, 0x04, 0x0b, 0x16, 0x0c, 0x12, 0x18, 0x24, 0x30, 0x48, 0x60, 0x6c,
-0x00, 0x00 };
-
-/**
  * FW rate table.  FW refers to rates by their index in this table, not by the
  * rate value itself.  Values of 0x00 are
  * reserved positions.
@@ -403,7 +285,7 @@
 		return count;
 	if (enable)
 		action = CMD_ACT_MESH_CONFIG_START;
-	ret = lbs_mesh_config(priv, action, priv->curbssparams.channel);
+	ret = lbs_mesh_config(priv, action, priv->channel);
 	if (ret)
 		return ret;
 
@@ -574,8 +456,10 @@
 	priv->dnld_sent = DNLD_RES_RECEIVED;
 
 	/* Wake main thread if commands are pending */
-	if (!priv->cur_cmd || priv->tx_pending_len > 0)
-		wake_up_interruptible(&priv->waitq);
+	if (!priv->cur_cmd || priv->tx_pending_len > 0) {
+		if (!priv->wakeup_dev_required)
+			wake_up_interruptible(&priv->waitq);
+	}
 
 	spin_unlock_irqrestore(&priv->driver_lock, flags);
 	lbs_deb_leave(LBS_DEB_THREAD);
@@ -770,7 +654,8 @@
 			shouldsleep = 0;	/* We have a command response */
 		else if (priv->cur_cmd)
 			shouldsleep = 1;	/* Can't send a command; one already running */
-		else if (!list_empty(&priv->cmdpendingq))
+		else if (!list_empty(&priv->cmdpendingq) &&
+					!(priv->wakeup_dev_required))
 			shouldsleep = 0;	/* We have a command to send */
 		else if (__kfifo_len(priv->event_fifo))
 			shouldsleep = 0;	/* We have an event to process */
@@ -822,6 +707,26 @@
 		}
 		spin_unlock_irq(&priv->driver_lock);
 
+		/* Process hardware events, e.g. card removed, link lost */
+		spin_lock_irq(&priv->driver_lock);
+		while (__kfifo_len(priv->event_fifo)) {
+			u32 event;
+			__kfifo_get(priv->event_fifo, (unsigned char *) &event,
+				sizeof(event));
+			spin_unlock_irq(&priv->driver_lock);
+			lbs_process_event(priv, event);
+			spin_lock_irq(&priv->driver_lock);
+		}
+		spin_unlock_irq(&priv->driver_lock);
+
+		if (priv->wakeup_dev_required) {
+			lbs_deb_thread("Waking up device...\n");
+			/* Wake up device */
+			if (priv->exit_deep_sleep(priv))
+				lbs_deb_thread("Wakeup device failed\n");
+			continue;
+		}
+
 		/* command timeout stuff */
 		if (priv->cmd_timed_out && priv->cur_cmd) {
 			struct cmd_ctrl_node *cmdnode = priv->cur_cmd;
@@ -849,18 +754,7 @@
 		}
 		priv->cmd_timed_out = 0;
 
-		/* Process hardware events, e.g. card removed, link lost */
-		spin_lock_irq(&priv->driver_lock);
-		while (__kfifo_len(priv->event_fifo)) {
-			u32 event;
 
-			__kfifo_get(priv->event_fifo, (unsigned char *) &event,
-				sizeof(event));
-			spin_unlock_irq(&priv->driver_lock);
-			lbs_process_event(priv, event);
-			spin_lock_irq(&priv->driver_lock);
-		}
-		spin_unlock_irq(&priv->driver_lock);
 
 		if (!priv->fw_ready)
 			continue;
@@ -894,6 +788,9 @@
 		    (priv->psstate == PS_STATE_PRE_SLEEP))
 			continue;
 
+		if (priv->is_deep_sleep)
+			continue;
+
 		/* Execute the next command */
 		if (!priv->dnld_sent && !priv->cur_cmd)
 			lbs_execute_next_command(priv);
@@ -928,6 +825,7 @@
 	}
 
 	del_timer(&priv->command_timer);
+	del_timer(&priv->auto_deepsleep_timer);
 	wake_up_all(&priv->cmd_pending);
 
 	lbs_deb_leave(LBS_DEB_THREAD);
@@ -1050,6 +948,62 @@
 	lbs_deb_leave(LBS_DEB_CMD);
 }
 
+/**
+ *  This function put the device back to deep sleep mode when timer expires
+ *  and no activity (command, event, data etc.) is detected.
+ */
+static void auto_deepsleep_timer_fn(unsigned long data)
+{
+	struct lbs_private *priv = (struct lbs_private *)data;
+	int ret;
+
+	lbs_deb_enter(LBS_DEB_CMD);
+
+	if (priv->is_activity_detected) {
+		priv->is_activity_detected = 0;
+	} else {
+		if (priv->is_auto_deep_sleep_enabled &&
+				(!priv->wakeup_dev_required) &&
+				(priv->connect_status != LBS_CONNECTED)) {
+			lbs_deb_main("Entering auto deep sleep mode...\n");
+			ret = lbs_prepare_and_send_command(priv,
+					CMD_802_11_DEEP_SLEEP, 0,
+					0, 0, NULL);
+			if (ret)
+				lbs_pr_err("Enter Deep Sleep command failed\n");
+		}
+	}
+	mod_timer(&priv->auto_deepsleep_timer , jiffies +
+				(priv->auto_deep_sleep_timeout * HZ)/1000);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
+
+int lbs_enter_auto_deep_sleep(struct lbs_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_SDIO);
+
+	priv->is_auto_deep_sleep_enabled = 1;
+	if (priv->is_deep_sleep)
+		priv->wakeup_dev_required = 1;
+	mod_timer(&priv->auto_deepsleep_timer ,
+			jiffies + (priv->auto_deep_sleep_timeout * HZ)/1000);
+
+	lbs_deb_leave(LBS_DEB_SDIO);
+	return 0;
+}
+
+int lbs_exit_auto_deep_sleep(struct lbs_private *priv)
+{
+	lbs_deb_enter(LBS_DEB_SDIO);
+
+	priv->is_auto_deep_sleep_enabled = 0;
+	priv->auto_deep_sleep_timeout = 0;
+	del_timer(&priv->auto_deepsleep_timer);
+
+	lbs_deb_leave(LBS_DEB_SDIO);
+	return 0;
+}
+
 static void lbs_sync_channel_worker(struct work_struct *work)
 {
 	struct lbs_private *priv = container_of(work, struct lbs_private,
@@ -1092,18 +1046,24 @@
 	priv->mesh_connect_status = LBS_DISCONNECTED;
 	priv->secinfo.auth_mode = IW_AUTH_ALG_OPEN_SYSTEM;
 	priv->mode = IW_MODE_INFRA;
-	priv->curbssparams.channel = DEFAULT_AD_HOC_CHANNEL;
+	priv->channel = DEFAULT_AD_HOC_CHANNEL;
 	priv->mac_control = CMD_ACT_MAC_RX_ON | CMD_ACT_MAC_TX_ON;
 	priv->radio_on = 1;
 	priv->enablehwauto = 1;
 	priv->capability = WLAN_CAPABILITY_SHORT_PREAMBLE;
 	priv->psmode = LBS802_11POWERMODECAM;
 	priv->psstate = PS_STATE_FULL_POWER;
+	priv->is_deep_sleep = 0;
+	priv->is_auto_deep_sleep_enabled = 0;
+	priv->wakeup_dev_required = 0;
+	init_waitqueue_head(&priv->ds_awake_q);
 
 	mutex_init(&priv->lock);
 
 	setup_timer(&priv->command_timer, command_timer_fn,
 		(unsigned long)priv);
+	setup_timer(&priv->auto_deepsleep_timer, auto_deepsleep_timer_fn,
+			(unsigned long)priv);
 
 	INIT_LIST_HEAD(&priv->cmdfreeq);
 	INIT_LIST_HEAD(&priv->cmdpendingq);
@@ -1142,6 +1102,7 @@
 	if (priv->event_fifo)
 		kfifo_free(priv->event_fifo);
 	del_timer(&priv->command_timer);
+	del_timer(&priv->auto_deepsleep_timer);
 	kfree(priv->networks);
 	priv->networks = NULL;
 
@@ -1168,31 +1129,41 @@
  */
 struct lbs_private *lbs_add_card(void *card, struct device *dmdev)
 {
-	struct net_device *dev = NULL;
+	struct net_device *dev;
+	struct wireless_dev *wdev;
 	struct lbs_private *priv = NULL;
 
 	lbs_deb_enter(LBS_DEB_MAIN);
 
 	/* Allocate an Ethernet device and register it */
-	dev = alloc_etherdev(sizeof(struct lbs_private));
-	if (!dev) {
-		lbs_pr_err("init wlanX device failed\n");
+	wdev = lbs_cfg_alloc(dmdev);
+	if (IS_ERR(wdev)) {
+		lbs_pr_err("cfg80211 init failed\n");
 		goto done;
 	}
-	priv = netdev_priv(dev);
-	dev->ml_priv = priv;
+	/* TODO? */
+	wdev->iftype = NL80211_IFTYPE_STATION;
+	priv = wdev_priv(wdev);
+	priv->wdev = wdev;
 
 	if (lbs_init_adapter(priv)) {
 		lbs_pr_err("failed to initialize adapter structure.\n");
-		goto err_init_adapter;
+		goto err_wdev;
 	}
 
-	priv->dev = dev;
-	priv->card = card;
-	priv->mesh_open = 0;
-	priv->infra_open = 0;
+	//TODO? dev = alloc_netdev_mq(0, "wlan%d", ether_setup, IWM_TX_QUEUES);
+	dev = alloc_netdev(0, "wlan%d", ether_setup);
+	if (!dev) {
+		dev_err(dmdev, "no memory for network device instance\n");
+		goto err_adapter;
+	}
 
-	/* Setup the OS Interface to our functions */
+	dev->ieee80211_ptr = wdev;
+	dev->ml_priv = priv;
+	SET_NETDEV_DEV(dev, dmdev);
+	wdev->netdev = dev;
+	priv->dev = dev;
+
  	dev->netdev_ops = &lbs_netdev_ops;
 	dev->watchdog_timeo = 5 * HZ;
 	dev->ethtool_ops = &lbs_ethtool_ops;
@@ -1201,7 +1172,14 @@
 #endif
 	dev->flags |= IFF_BROADCAST | IFF_MULTICAST;
 
-	SET_NETDEV_DEV(dev, dmdev);
+
+	// TODO: kzalloc + iwm_init_default_profile(iwm, iwm->umac_profile); ??
+
+
+	priv->card = card;
+	priv->mesh_open = 0;
+	priv->infra_open = 0;
+
 
 	priv->rtap_net_dev = NULL;
 	strcpy(dev->name, "wlan%d");
@@ -1211,7 +1189,7 @@
 	priv->main_thread = kthread_run(lbs_thread, dev, "lbs_main");
 	if (IS_ERR(priv->main_thread)) {
 		lbs_deb_thread("Error creating main thread.\n");
-		goto err_init_adapter;
+		goto err_ndev;
 	}
 
 	priv->work_thread = create_singlethread_workqueue("lbs_worker");
@@ -1228,9 +1206,15 @@
 
 	goto done;
 
-err_init_adapter:
-	lbs_free_adapter(priv);
+ err_ndev:
 	free_netdev(dev);
+
+ err_adapter:
+	lbs_free_adapter(priv);
+
+ err_wdev:
+	lbs_cfg_free(priv);
+
 	priv = NULL;
 
 done:
@@ -1243,7 +1227,6 @@
 void lbs_remove_card(struct lbs_private *priv)
 {
 	struct net_device *dev = priv->dev;
-	union iwreq_data wrqu;
 
 	lbs_deb_enter(LBS_DEB_MAIN);
 
@@ -1268,15 +1251,19 @@
 		lbs_ps_wakeup(priv, CMD_OPTION_WAITFORRSP);
 	}
 
-	memset(wrqu.ap_addr.sa_data, 0xaa, ETH_ALEN);
-	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
-	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+	lbs_send_disconnect_notification(priv);
+
+	if (priv->is_deep_sleep) {
+		priv->is_deep_sleep = 0;
+		wake_up_interruptible(&priv->ds_awake_q);
+	}
 
 	/* Stop the thread servicing the interrupts */
 	priv->surpriseremoved = 1;
 	kthread_stop(priv->main_thread);
 
 	lbs_free_adapter(priv);
+	lbs_cfg_free(priv);
 
 	priv->dev = NULL;
 	free_netdev(dev);
@@ -1298,11 +1285,8 @@
 	if (ret)
 		goto done;
 
-	/* init 802.11d */
-	lbs_init_11d(priv);
-
-	if (register_netdev(dev)) {
-		lbs_pr_err("cannot register ethX device\n");
+	if (lbs_cfg_register(priv)) {
+		lbs_pr_err("cannot register device\n");
 		goto done;
 	}
 
@@ -1327,10 +1311,10 @@
 
 		priv->mesh_tlv = TLV_TYPE_OLD_MESH_ID;
 		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				    priv->curbssparams.channel)) {
+				    priv->channel)) {
 			priv->mesh_tlv = TLV_TYPE_MESH_ID;
 			if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-					    priv->curbssparams.channel))
+					    priv->channel))
 				priv->mesh_tlv = 0;
 		}
 	} else if (priv->mesh_fw_ver == MESH_FW_NEW) {
@@ -1339,7 +1323,7 @@
 		 */
 		priv->mesh_tlv = TLV_TYPE_MESH_ID;
 		if (lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-				    priv->curbssparams.channel))
+				    priv->channel))
 			priv->mesh_tlv = 0;
 	}
 	if (priv->mesh_tlv) {
@@ -1392,6 +1376,7 @@
 
 	/* Delete the timeout of the currently processing command */
 	del_timer_sync(&priv->command_timer);
+	del_timer_sync(&priv->auto_deepsleep_timer);
 
 	/* Flush pending command nodes */
 	spin_lock_irqsave(&priv->driver_lock, flags);
@@ -1509,68 +1494,6 @@
 	lbs_deb_leave(LBS_DEB_MESH);
 }
 
-/**
- *  @brief This function finds the CFP in
- *  region_cfp_table based on region and band parameter.
- *
- *  @param region  The region code
- *  @param band	   The band
- *  @param cfp_no  A pointer to CFP number
- *  @return 	   A pointer to CFP
- */
-struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
-{
-	int i, end;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-
-	end = ARRAY_SIZE(region_cfp_table);
-
-	for (i = 0; i < end ; i++) {
-		lbs_deb_main("region_cfp_table[i].region=%d\n",
-			region_cfp_table[i].region);
-		if (region_cfp_table[i].region == region) {
-			*cfp_no = region_cfp_table[i].cfp_no_BG;
-			lbs_deb_leave(LBS_DEB_MAIN);
-			return region_cfp_table[i].cfp_BG;
-		}
-	}
-
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
-	return NULL;
-}
-
-int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
-{
-	int ret = 0;
-	int i = 0;
-
-	struct chan_freq_power *cfp;
-	int cfp_no;
-
-	lbs_deb_enter(LBS_DEB_MAIN);
-
-	memset(priv->region_channel, 0, sizeof(priv->region_channel));
-
-	cfp = lbs_get_region_cfp_table(region, &cfp_no);
-	if (cfp != NULL) {
-		priv->region_channel[i].nrcfp = cfp_no;
-		priv->region_channel[i].CFP = cfp;
-	} else {
-		lbs_deb_main("wrong region code %#x in band B/G\n",
-		       region);
-		ret = -1;
-		goto out;
-	}
-	priv->region_channel[i].valid = 1;
-	priv->region_channel[i].region = region;
-	priv->region_channel[i].band = band;
-	i++;
-out:
-	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
-	return ret;
-}
-
 void lbs_queue_event(struct lbs_private *priv, u32 event)
 {
 	unsigned long flags;
diff --git a/drivers/net/wireless/libertas/persistcfg.c b/drivers/net/wireless/libertas/persistcfg.c
index 18fe29f..871f914 100644
--- a/drivers/net/wireless/libertas/persistcfg.c
+++ b/drivers/net/wireless/libertas/persistcfg.c
@@ -187,9 +187,9 @@
 	if (ret)
 		return ret;
 
-	if (defs.meshie.val.mesh_id_len > IW_ESSID_MAX_SIZE) {
+	if (defs.meshie.val.mesh_id_len > IEEE80211_MAX_SSID_LEN) {
 		lbs_pr_err("inconsistent mesh ID length");
-		defs.meshie.val.mesh_id_len = IW_ESSID_MAX_SIZE;
+		defs.meshie.val.mesh_id_len = IEEE80211_MAX_SSID_LEN;
 	}
 
 	/* SSID not null terminated: reserve room for \0 + \n */
@@ -214,7 +214,7 @@
 	int len;
 	int ret;
 
-	if (count < 2 || count > IW_ESSID_MAX_SIZE + 1)
+	if (count < 2 || count > IEEE80211_MAX_SSID_LEN + 1)
 		return -EINVAL;
 
 	memset(&cmd, 0, sizeof(struct cmd_ds_mesh_config));
@@ -233,7 +233,7 @@
 	/* SSID len */
 	ie->val.mesh_id_len = len;
 	/* IE len */
-	ie->len = sizeof(struct mrvl_meshie_val) - IW_ESSID_MAX_SIZE + len;
+	ie->len = sizeof(struct mrvl_meshie_val) - IEEE80211_MAX_SSID_LEN + len;
 
 	ret = lbs_mesh_config_send(priv, &cmd, CMD_ACT_MESH_CONFIG_SET,
 				   CMD_TYPE_MESH_SET_MESH_IE);
diff --git a/drivers/net/wireless/libertas/rx.c b/drivers/net/wireless/libertas/rx.c
index 65f02cc..9f18a19 100644
--- a/drivers/net/wireless/libertas/rx.c
+++ b/drivers/net/wireless/libertas/rx.c
@@ -4,7 +4,7 @@
 #include <linux/etherdevice.h>
 #include <linux/types.h>
 
-#include "hostcmd.h"
+#include "host.h"
 #include "radiotap.h"
 #include "decl.h"
 #include "dev.h"
diff --git a/drivers/net/wireless/libertas/scan.c b/drivers/net/wireless/libertas/scan.c
index 6c95af3..c6a6c04 100644
--- a/drivers/net/wireless/libertas/scan.c
+++ b/drivers/net/wireless/libertas/scan.c
@@ -12,18 +12,19 @@
 #include <net/lib80211.h>
 
 #include "host.h"
-#include "decl.h"
 #include "dev.h"
 #include "scan.h"
+#include "assoc.h"
+#include "wext.h"
 #include "cmd.h"
 
 //! Approximate amount of data needed to pass a scan result back to iwlist
 #define MAX_SCAN_CELL_SIZE  (IW_EV_ADDR_LEN             \
-                             + IW_ESSID_MAX_SIZE        \
+                             + IEEE80211_MAX_SSID_LEN   \
                              + IW_EV_UINT_LEN           \
                              + IW_EV_FREQ_LEN           \
                              + IW_EV_QUAL_LEN           \
-                             + IW_ESSID_MAX_SIZE        \
+                             + IEEE80211_MAX_SSID_LEN   \
                              + IW_EV_PARAM_LEN          \
                              + 40)	/* 40 for WPAIE */
 
@@ -121,6 +122,189 @@
 
 
 
+/*********************************************************************/
+/*                                                                   */
+/* Region channel support                                            */
+/*                                                                   */
+/*********************************************************************/
+
+#define LBS_TX_PWR_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_US_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_JP_DEFAULT		16	/*50mW */
+#define LBS_TX_PWR_FR_DEFAULT		20	/*100mW */
+#define LBS_TX_PWR_EMEA_DEFAULT	20	/*100mW */
+
+/* Format { channel, frequency (MHz), maxtxpower } */
+/* band: 'B/G', region: USA FCC/Canada IC */
+static struct chan_freq_power channel_freq_power_US_BG[] = {
+	{1, 2412, LBS_TX_PWR_US_DEFAULT},
+	{2, 2417, LBS_TX_PWR_US_DEFAULT},
+	{3, 2422, LBS_TX_PWR_US_DEFAULT},
+	{4, 2427, LBS_TX_PWR_US_DEFAULT},
+	{5, 2432, LBS_TX_PWR_US_DEFAULT},
+	{6, 2437, LBS_TX_PWR_US_DEFAULT},
+	{7, 2442, LBS_TX_PWR_US_DEFAULT},
+	{8, 2447, LBS_TX_PWR_US_DEFAULT},
+	{9, 2452, LBS_TX_PWR_US_DEFAULT},
+	{10, 2457, LBS_TX_PWR_US_DEFAULT},
+	{11, 2462, LBS_TX_PWR_US_DEFAULT}
+};
+
+/* band: 'B/G', region: Europe ETSI */
+static struct chan_freq_power channel_freq_power_EU_BG[] = {
+	{1, 2412, LBS_TX_PWR_EMEA_DEFAULT},
+	{2, 2417, LBS_TX_PWR_EMEA_DEFAULT},
+	{3, 2422, LBS_TX_PWR_EMEA_DEFAULT},
+	{4, 2427, LBS_TX_PWR_EMEA_DEFAULT},
+	{5, 2432, LBS_TX_PWR_EMEA_DEFAULT},
+	{6, 2437, LBS_TX_PWR_EMEA_DEFAULT},
+	{7, 2442, LBS_TX_PWR_EMEA_DEFAULT},
+	{8, 2447, LBS_TX_PWR_EMEA_DEFAULT},
+	{9, 2452, LBS_TX_PWR_EMEA_DEFAULT},
+	{10, 2457, LBS_TX_PWR_EMEA_DEFAULT},
+	{11, 2462, LBS_TX_PWR_EMEA_DEFAULT},
+	{12, 2467, LBS_TX_PWR_EMEA_DEFAULT},
+	{13, 2472, LBS_TX_PWR_EMEA_DEFAULT}
+};
+
+/* band: 'B/G', region: Spain */
+static struct chan_freq_power channel_freq_power_SPN_BG[] = {
+	{10, 2457, LBS_TX_PWR_DEFAULT},
+	{11, 2462, LBS_TX_PWR_DEFAULT}
+};
+
+/* band: 'B/G', region: France */
+static struct chan_freq_power channel_freq_power_FR_BG[] = {
+	{10, 2457, LBS_TX_PWR_FR_DEFAULT},
+	{11, 2462, LBS_TX_PWR_FR_DEFAULT},
+	{12, 2467, LBS_TX_PWR_FR_DEFAULT},
+	{13, 2472, LBS_TX_PWR_FR_DEFAULT}
+};
+
+/* band: 'B/G', region: Japan */
+static struct chan_freq_power channel_freq_power_JPN_BG[] = {
+	{1, 2412, LBS_TX_PWR_JP_DEFAULT},
+	{2, 2417, LBS_TX_PWR_JP_DEFAULT},
+	{3, 2422, LBS_TX_PWR_JP_DEFAULT},
+	{4, 2427, LBS_TX_PWR_JP_DEFAULT},
+	{5, 2432, LBS_TX_PWR_JP_DEFAULT},
+	{6, 2437, LBS_TX_PWR_JP_DEFAULT},
+	{7, 2442, LBS_TX_PWR_JP_DEFAULT},
+	{8, 2447, LBS_TX_PWR_JP_DEFAULT},
+	{9, 2452, LBS_TX_PWR_JP_DEFAULT},
+	{10, 2457, LBS_TX_PWR_JP_DEFAULT},
+	{11, 2462, LBS_TX_PWR_JP_DEFAULT},
+	{12, 2467, LBS_TX_PWR_JP_DEFAULT},
+	{13, 2472, LBS_TX_PWR_JP_DEFAULT},
+	{14, 2484, LBS_TX_PWR_JP_DEFAULT}
+};
+
+/**
+ * the structure for channel, frequency and power
+ */
+struct region_cfp_table {
+	u8 region;
+	struct chan_freq_power *cfp_BG;
+	int cfp_no_BG;
+};
+
+/**
+ * the structure for the mapping between region and CFP
+ */
+static struct region_cfp_table region_cfp_table[] = {
+	{0x10,			/*US FCC */
+	 channel_freq_power_US_BG,
+	 ARRAY_SIZE(channel_freq_power_US_BG),
+	 }
+	,
+	{0x20,			/*CANADA IC */
+	 channel_freq_power_US_BG,
+	 ARRAY_SIZE(channel_freq_power_US_BG),
+	 }
+	,
+	{0x30, /*EU*/ channel_freq_power_EU_BG,
+	 ARRAY_SIZE(channel_freq_power_EU_BG),
+	 }
+	,
+	{0x31, /*SPAIN*/ channel_freq_power_SPN_BG,
+	 ARRAY_SIZE(channel_freq_power_SPN_BG),
+	 }
+	,
+	{0x32, /*FRANCE*/ channel_freq_power_FR_BG,
+	 ARRAY_SIZE(channel_freq_power_FR_BG),
+	 }
+	,
+	{0x40, /*JAPAN*/ channel_freq_power_JPN_BG,
+	 ARRAY_SIZE(channel_freq_power_JPN_BG),
+	 }
+	,
+/*Add new region here */
+};
+
+/**
+ *  @brief This function finds the CFP in
+ *  region_cfp_table based on region and band parameter.
+ *
+ *  @param region  The region code
+ *  @param band	   The band
+ *  @param cfp_no  A pointer to CFP number
+ *  @return 	   A pointer to CFP
+ */
+static struct chan_freq_power *lbs_get_region_cfp_table(u8 region, int *cfp_no)
+{
+	int i, end;
+
+	lbs_deb_enter(LBS_DEB_MAIN);
+
+	end = ARRAY_SIZE(region_cfp_table);
+
+	for (i = 0; i < end ; i++) {
+		lbs_deb_main("region_cfp_table[i].region=%d\n",
+			region_cfp_table[i].region);
+		if (region_cfp_table[i].region == region) {
+			*cfp_no = region_cfp_table[i].cfp_no_BG;
+			lbs_deb_leave(LBS_DEB_MAIN);
+			return region_cfp_table[i].cfp_BG;
+		}
+	}
+
+	lbs_deb_leave_args(LBS_DEB_MAIN, "ret NULL");
+	return NULL;
+}
+
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band)
+{
+	int ret = 0;
+	int i = 0;
+
+	struct chan_freq_power *cfp;
+	int cfp_no;
+
+	lbs_deb_enter(LBS_DEB_MAIN);
+
+	memset(priv->region_channel, 0, sizeof(priv->region_channel));
+
+	cfp = lbs_get_region_cfp_table(region, &cfp_no);
+	if (cfp != NULL) {
+		priv->region_channel[i].nrcfp = cfp_no;
+		priv->region_channel[i].CFP = cfp;
+	} else {
+		lbs_deb_main("wrong region code %#x in band B/G\n",
+		       region);
+		ret = -1;
+		goto out;
+	}
+	priv->region_channel[i].valid = 1;
+	priv->region_channel[i].region = region;
+	priv->region_channel[i].band = band;
+	i++;
+out:
+	lbs_deb_leave_args(LBS_DEB_MAIN, "ret %d", ret);
+	return ret;
+}
+
+
+
 
 /*********************************************************************/
 /*                                                                   */
@@ -161,31 +345,15 @@
 	scantype = CMD_SCAN_TYPE_ACTIVE;
 
 	for (rgnidx = 0; rgnidx < ARRAY_SIZE(priv->region_channel); rgnidx++) {
-		if (priv->enable11d && (priv->connect_status != LBS_CONNECTED)
-		    && (priv->mesh_connect_status != LBS_CONNECTED)) {
-			/* Scan all the supported chan for the first scan */
-			if (!priv->universal_channel[rgnidx].valid)
-				continue;
-			scanregion = &priv->universal_channel[rgnidx];
-
-			/* clear the parsed_region_chan for the first scan */
-			memset(&priv->parsed_region_chan, 0x00,
-			       sizeof(priv->parsed_region_chan));
-		} else {
-			if (!priv->region_channel[rgnidx].valid)
-				continue;
-			scanregion = &priv->region_channel[rgnidx];
-		}
+		if (!priv->region_channel[rgnidx].valid)
+			continue;
+		scanregion = &priv->region_channel[rgnidx];
 
 		for (nextchan = 0; nextchan < scanregion->nrcfp; nextchan++, chanidx++) {
 			struct chanscanparamset *chan = &scanchanlist[chanidx];
 
 			cfp = scanregion->CFP + nextchan;
 
-			if (priv->enable11d)
-				scantype = lbs_get_scan_type_11d(cfp->channel,
-								 &priv->parsed_region_chan);
-
 			if (scanregion->band == BAND_B || scanregion->band == BAND_G)
 				chan->radiotype = CMD_SCAN_RADIO_TYPE_BG;
 
@@ -519,7 +687,6 @@
 	struct ieee_ie_cf_param_set *cf;
 	struct ieee_ie_ibss_param_set *ibss;
 	DECLARE_SSID_BUF(ssid);
-	struct ieee_ie_country_info_set *pcountryinfo;
 	uint8_t *pos, *end, *p;
 	uint8_t n_ex_rates = 0, got_basic_rates = 0, n_basic_rates = 0;
 	uint16_t beaconsize = 0;
@@ -642,26 +809,6 @@
 			lbs_deb_scan("got IBSS IE\n");
 			break;
 
-		case WLAN_EID_COUNTRY:
-			pcountryinfo = (struct ieee_ie_country_info_set *) pos;
-			lbs_deb_scan("got COUNTRY IE\n");
-			if (pcountryinfo->header.len < sizeof(pcountryinfo->countrycode)
-			    || pcountryinfo->header.len > 254) {
-				lbs_deb_scan("%s: 11D- Err CountryInfo len %d, min %zd, max 254\n",
-					     __func__,
-					     pcountryinfo->header.len,
-					     sizeof(pcountryinfo->countrycode));
-				ret = -1;
-				goto done;
-			}
-
-			memcpy(&bss->countryinfo, pcountryinfo,
-				pcountryinfo->header.len + 2);
-			lbs_deb_hex(LBS_DEB_SCAN, "process_bss: 11d countryinfo",
-				    (uint8_t *) pcountryinfo,
-				    (int) (pcountryinfo->header.len + 2));
-			break;
-
 		case WLAN_EID_EXT_SUPP_RATES:
 			/* only process extended supported rate if data rate is
 			 * already found. Data rate IE should come before
@@ -812,7 +959,7 @@
 	/* SSID */
 	iwe.cmd = SIOCGIWESSID;
 	iwe.u.data.flags = 1;
-	iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IW_ESSID_MAX_SIZE);
+	iwe.u.data.length = min((uint32_t) bss->ssid_len, (uint32_t) IEEE80211_MAX_SSID_LEN);
 	start = iwe_stream_add_point(info, start, stop, &iwe, bss->ssid);
 
 	/* Mode */
@@ -1022,9 +1169,12 @@
 		return -EAGAIN;
 
 	/* Update RSSI if current BSS is a locally created ad-hoc BSS */
-	if ((priv->mode == IW_MODE_ADHOC) && priv->adhoccreate)
-		lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
-					     CMD_OPTION_WAITFORRSP, 0, NULL);
+	if ((priv->mode == IW_MODE_ADHOC) && priv->adhoccreate) {
+		err = lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
+				CMD_OPTION_WAITFORRSP, 0, NULL);
+		if (err)
+			goto out;
+	}
 
 	mutex_lock(&priv->lock);
 	list_for_each_entry_safe (iter_bss, safe, &priv->network_list, list) {
@@ -1058,7 +1208,7 @@
 
 	dwrq->length = (ev - extra);
 	dwrq->flags = 0;
-
+out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", err);
 	return err;
 }
@@ -1141,11 +1291,11 @@
 	/* The size of the TLV buffer is equal to the entire command response
 	 *   size (scanrespsize) minus the fixed fields (sizeof()'s), the
 	 *   BSS Descriptions (bssdescriptsize as bytesLef) and the command
-	 *   response header (S_DS_GEN)
+	 *   response header (sizeof(struct cmd_header))
 	 */
 	tlvbufsize = scanrespsize - (bytesleft + sizeof(scanresp->bssdescriptsize)
 				     + sizeof(scanresp->nr_sets)
-				     + S_DS_GEN);
+				     + sizeof(struct cmd_header));
 
 	/*
 	 *  Process each scan response returned (scanresp->nr_sets). Save
diff --git a/drivers/net/wireless/libertas/scan.h b/drivers/net/wireless/libertas/scan.h
index fab7d5d..8fb1706 100644
--- a/drivers/net/wireless/libertas/scan.h
+++ b/drivers/net/wireless/libertas/scan.h
@@ -9,8 +9,36 @@
 
 #include <net/iw_handler.h>
 
+struct lbs_private;
+
 #define MAX_NETWORK_COUNT 128
 
+/** Chan-freq-TxPower mapping table*/
+struct chan_freq_power {
+	/** channel Number		*/
+	u16 channel;
+	/** frequency of this channel	*/
+	u32 freq;
+	/** Max allowed Tx power level	*/
+	u16 maxtxpower;
+	/** TRUE:channel unsupported;  FLASE:supported*/
+	u8 unsupported;
+};
+
+/** region-band mapping table*/
+struct region_channel {
+	/** TRUE if this entry is valid		     */
+	u8 valid;
+	/** region code for US, Japan ...	     */
+	u8 region;
+	/** band B/G/A, used for BAND_CONFIG cmd	     */
+	u8 band;
+	/** Actual No. of elements in the array below */
+	u8 nrcfp;
+	/** chan-freq-txpower mapping table*/
+	struct chan_freq_power *CFP;
+};
+
 /**
  *  @brief Maximum number of channels that can be sent in a setuserscan ioctl
  */
@@ -18,6 +46,8 @@
 
 int lbs_ssid_cmp(u8 *ssid1, u8 ssid1_len, u8 *ssid2, u8 ssid2_len);
 
+int lbs_set_regiontable(struct lbs_private *priv, u8 region, u8 band);
+
 int lbs_send_specific_ssid_scan(struct lbs_private *priv, u8 *ssid,
 				u8 ssid_len);
 
diff --git a/drivers/net/wireless/libertas/tx.c b/drivers/net/wireless/libertas/tx.c
index 4c018f7..5d7c011 100644
--- a/drivers/net/wireless/libertas/tx.c
+++ b/drivers/net/wireless/libertas/tx.c
@@ -4,7 +4,7 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 
-#include "hostcmd.h"
+#include "host.h"
 #include "radiotap.h"
 #include "decl.h"
 #include "defs.h"
diff --git a/drivers/net/wireless/libertas/types.h b/drivers/net/wireless/libertas/types.h
index 99905df..3e72c86 100644
--- a/drivers/net/wireless/libertas/types.h
+++ b/drivers/net/wireless/libertas/types.h
@@ -5,8 +5,8 @@
 #define _LBS_TYPES_H_
 
 #include <linux/if_ether.h>
+#include <linux/ieee80211.h>
 #include <asm/byteorder.h>
-#include <linux/wireless.h>
 
 struct ieee_ie_header {
 	u8 id;
@@ -247,7 +247,7 @@
 	uint8_t active_metric_id;
 	uint8_t mesh_capability;
 	uint8_t mesh_id_len;
-	uint8_t mesh_id[IW_ESSID_MAX_SIZE];
+	uint8_t mesh_id[IEEE80211_MAX_SSID_LEN];
 } __attribute__ ((packed));
 
 struct mrvl_meshie {
diff --git a/drivers/net/wireless/libertas/wext.c b/drivers/net/wireless/libertas/wext.c
index be837a0d25..a8eb9e1 100644
--- a/drivers/net/wireless/libertas/wext.c
+++ b/drivers/net/wireless/libertas/wext.c
@@ -45,6 +45,63 @@
 	priv->pending_assoc_req = NULL;
 }
 
+void lbs_send_disconnect_notification(struct lbs_private *priv)
+{
+	union iwreq_data wrqu;
+
+	memset(wrqu.ap_addr.sa_data, 0x00, ETH_ALEN);
+	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+	wireless_send_event(priv->dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+static void lbs_send_iwevcustom_event(struct lbs_private *priv, s8 *str)
+{
+	union iwreq_data iwrq;
+	u8 buf[50];
+
+	lbs_deb_enter(LBS_DEB_WEXT);
+
+	memset(&iwrq, 0, sizeof(union iwreq_data));
+	memset(buf, 0, sizeof(buf));
+
+	snprintf(buf, sizeof(buf) - 1, "%s", str);
+
+	iwrq.data.length = strlen(buf) + 1 + IW_EV_LCP_LEN;
+
+	/* Send Event to upper layer */
+	lbs_deb_wext("event indication string %s\n", (char *)buf);
+	lbs_deb_wext("event indication length %d\n", iwrq.data.length);
+	lbs_deb_wext("sending wireless event IWEVCUSTOM for %s\n", str);
+
+	wireless_send_event(priv->dev, IWEVCUSTOM, &iwrq, buf);
+
+	lbs_deb_leave(LBS_DEB_WEXT);
+}
+
+/**
+ *  @brief This function handles MIC failure event.
+ *
+ *  @param priv    A pointer to struct lbs_private structure
+ *  @para  event   the event id
+ *  @return 	   n/a
+ */
+void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event)
+{
+	char buf[50];
+
+	lbs_deb_enter(LBS_DEB_CMD);
+	memset(buf, 0, sizeof(buf));
+
+	sprintf(buf, "%s", "MLME-MICHAELMICFAILURE.indication ");
+
+	if (event == MACREG_INT_CODE_MIC_ERR_UNICAST)
+		strcat(buf, "unicast ");
+	else
+		strcat(buf, "multicast ");
+
+	lbs_send_iwevcustom_event(priv, buf);
+	lbs_deb_leave(LBS_DEB_CMD);
+}
 
 /**
  *  @brief Find the channel frequency power info with specific channel
@@ -66,8 +123,6 @@
 	for (j = 0; !cfp && (j < ARRAY_SIZE(priv->region_channel)); j++) {
 		rc = &priv->region_channel[j];
 
-		if (priv->enable11d)
-			rc = &priv->universal_channel[j];
 		if (!rc->valid || !rc->CFP)
 			continue;
 		if (rc->band != band)
@@ -107,8 +162,6 @@
 	for (j = 0; !cfp && (j < ARRAY_SIZE(priv->region_channel)); j++) {
 		rc = &priv->region_channel[j];
 
-		if (priv->enable11d)
-			rc = &priv->universal_channel[j];
 		if (!rc->valid || !rc->CFP)
 			continue;
 		if (rc->band != band)
@@ -169,12 +222,12 @@
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	cfp = lbs_find_cfp_by_band_and_channel(priv, 0,
-					   priv->curbssparams.channel);
+					   priv->channel);
 
 	if (!cfp) {
-		if (priv->curbssparams.channel)
+		if (priv->channel)
 			lbs_deb_wext("invalid channel %d\n",
-			       priv->curbssparams.channel);
+			       priv->channel);
 		return -EINVAL;
 	}
 
@@ -547,8 +600,6 @@
 	struct chan_freq_power *cfp;
 	u8 rates[MAX_RATES + 1];
 
-	u8 flag = 0;
-
 	lbs_deb_enter(LBS_DEB_WEXT);
 
 	dwrq->length = sizeof(struct iw_range);
@@ -570,52 +621,21 @@
 
 	range->scan_capa = IW_SCAN_CAPA_ESSID;
 
-	if (priv->enable11d &&
-	    (priv->connect_status == LBS_CONNECTED ||
-	    priv->mesh_connect_status == LBS_CONNECTED)) {
-		u8 chan_no;
-		u8 band;
-
-		struct parsed_region_chan_11d *parsed_region_chan =
-		    &priv->parsed_region_chan;
-
-		if (parsed_region_chan == NULL) {
-			lbs_deb_wext("11d: parsed_region_chan is NULL\n");
-			goto out;
-		}
-		band = parsed_region_chan->band;
-		lbs_deb_wext("band %d, nr_char %d\n", band,
-		       parsed_region_chan->nr_chan);
-
+	for (j = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
+	     && (j < ARRAY_SIZE(priv->region_channel)); j++) {
+		cfp = priv->region_channel[j].CFP;
 		for (i = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-		     && (i < parsed_region_chan->nr_chan); i++) {
-			chan_no = parsed_region_chan->chanpwr[i].chan;
-			lbs_deb_wext("chan_no %d\n", chan_no);
-			range->freq[range->num_frequency].i = (long)chan_no;
+		     && priv->region_channel[j].valid
+		     && cfp
+		     && (i < priv->region_channel[j].nrcfp); i++) {
+			range->freq[range->num_frequency].i =
+			    (long)cfp->channel;
 			range->freq[range->num_frequency].m =
-			    (long)lbs_chan_2_freq(chan_no) * 100000;
+			    (long)cfp->freq * 100000;
 			range->freq[range->num_frequency].e = 1;
+			cfp++;
 			range->num_frequency++;
 		}
-		flag = 1;
-	}
-	if (!flag) {
-		for (j = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-		     && (j < ARRAY_SIZE(priv->region_channel)); j++) {
-			cfp = priv->region_channel[j].CFP;
-			for (i = 0; (range->num_frequency < IW_MAX_FREQUENCIES)
-			     && priv->region_channel[j].valid
-			     && cfp
-			     && (i < priv->region_channel[j].nrcfp); i++) {
-				range->freq[range->num_frequency].i =
-				    (long)cfp->channel;
-				range->freq[range->num_frequency].m =
-				    (long)cfp->freq * 100000;
-				range->freq[range->num_frequency].e = 1;
-				cfp++;
-				range->num_frequency++;
-			}
-		}
 	}
 
 	lbs_deb_wext("IW_MAX_FREQUENCIES %d, num_frequency %d\n",
@@ -700,7 +720,6 @@
 		                  | IW_ENC_CAPA_CIPHER_CCMP;
 	}
 
-out:
 	lbs_deb_leave(LBS_DEB_WEXT);
 	return 0;
 }
@@ -709,6 +728,7 @@
 			  struct iw_param *vwrq, char *extra)
 {
 	struct lbs_private *priv = dev->ml_priv;
+	int ret = 0;
 
 	lbs_deb_enter(LBS_DEB_WEXT);
 
@@ -737,8 +757,54 @@
 		       "setting power timeout is not supported\n");
 		return -EINVAL;
 	} else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
-		lbs_deb_wext("setting power period not supported\n");
-		return -EINVAL;
+		vwrq->value = vwrq->value / 1000;
+		if (!priv->enter_deep_sleep) {
+			lbs_pr_err("deep sleep feature is not implemented "
+					"for this interface driver\n");
+			return -EINVAL;
+		}
+
+		if (priv->connect_status == LBS_CONNECTED) {
+			if ((priv->is_auto_deep_sleep_enabled) &&
+						(vwrq->value == -1000)) {
+				lbs_exit_auto_deep_sleep(priv);
+				return 0;
+			} else {
+				lbs_pr_err("can't use deep sleep cmd in "
+						"connected state\n");
+				return -EINVAL;
+			}
+		}
+
+		if ((vwrq->value < 0) && (vwrq->value != -1000)) {
+			lbs_pr_err("unknown option\n");
+			return -EINVAL;
+		}
+
+		if (vwrq->value > 0) {
+			if (!priv->is_auto_deep_sleep_enabled) {
+				priv->is_activity_detected = 0;
+				priv->auto_deep_sleep_timeout = vwrq->value;
+				lbs_enter_auto_deep_sleep(priv);
+			} else {
+				priv->auto_deep_sleep_timeout = vwrq->value;
+				lbs_deb_debugfs("auto deep sleep: "
+						"already enabled\n");
+			}
+			return 0;
+		} else {
+			if (priv->is_auto_deep_sleep_enabled) {
+				lbs_exit_auto_deep_sleep(priv);
+				/* Try to exit deep sleep if auto */
+				/*deep sleep disabled */
+				ret = lbs_set_deep_sleep(priv, 0);
+			}
+			if (vwrq->value == 0)
+				ret = lbs_set_deep_sleep(priv, 1);
+			else if (vwrq->value == -1000)
+				ret = lbs_set_deep_sleep(priv, 0);
+			return ret;
+		}
 	}
 
 	if (priv->psmode != LBS802_11POWERMODECAM) {
@@ -752,6 +818,7 @@
 	}
 
 	lbs_deb_leave(LBS_DEB_WEXT);
+
 	return 0;
 }
 
@@ -785,7 +852,7 @@
 	u32 rssi_qual;
 	u32 tx_qual;
 	u32 quality = 0;
-	int stats_valid = 0;
+	int ret, stats_valid = 0;
 	u8 rssi;
 	u32 tx_retries;
 	struct cmd_ds_802_11_get_log log;
@@ -834,7 +901,9 @@
 
 	memset(&log, 0, sizeof(log));
 	log.hdr.size = cpu_to_le16(sizeof(log));
-	lbs_cmd_with_response(priv, CMD_802_11_GET_LOG, &log);
+	ret = lbs_cmd_with_response(priv, CMD_802_11_GET_LOG, &log);
+	if (ret)
+		goto out;
 
 	tx_retries = le32_to_cpu(log.retry);
 
@@ -862,8 +931,10 @@
 	stats_valid = 1;
 
 	/* update stats asynchronously for future calls */
-	lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
+	ret = lbs_prepare_and_send_command(priv, CMD_802_11_RSSI, 0,
 					0, 0, NULL);
+	if (ret)
+		lbs_pr_err("RSSI command failed\n");
 out:
 	if (!stats_valid) {
 		priv->wstats.miss.beacon = 0;
@@ -973,7 +1044,7 @@
 		goto out;
 	}
 
-	if (fwrq->m != priv->curbssparams.channel) {
+	if (fwrq->m != priv->channel) {
 		lbs_deb_wext("mesh channel change forces eth disconnect\n");
 		if (priv->mode == IW_MODE_INFRA)
 			lbs_cmd_80211_deauthenticate(priv,
@@ -1000,6 +1071,7 @@
 	u8 rates[MAX_RATES + 1];
 
 	lbs_deb_enter(LBS_DEB_WEXT);
+
 	lbs_deb_wext("vwrq->value %d\n", vwrq->value);
 	lbs_deb_wext("vwrq->fixed %d\n", vwrq->fixed);
 
@@ -1975,7 +2047,7 @@
 {
 	struct lbs_private *priv = dev->ml_priv;
 	int ret = 0;
-	u8 ssid[IW_ESSID_MAX_SIZE];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
 	u8 ssid_len = 0;
 	struct assoc_request * assoc_req;
 	int in_ssid_len = dwrq->length;
@@ -1989,7 +2061,7 @@
 	}
 
 	/* Check the size of the string */
-	if (in_ssid_len > IW_ESSID_MAX_SIZE) {
+	if (in_ssid_len > IEEE80211_MAX_SSID_LEN) {
 		ret = -E2BIG;
 		goto out;
 	}
@@ -2020,7 +2092,7 @@
 			ret = -ENOMEM;
 		} else {
 			/* Copy the SSID to the association request */
-			memcpy(&assoc_req->ssid, &ssid, IW_ESSID_MAX_SIZE);
+			memcpy(&assoc_req->ssid, &ssid, IEEE80211_MAX_SSID_LEN);
 			assoc_req->ssid_len = ssid_len;
 			set_bit(ASSOC_FLAG_SSID, &assoc_req->flags);
 			lbs_postpone_association_work(priv);
@@ -2071,7 +2143,7 @@
 	}
 
 	/* Check the size of the string */
-	if (dwrq->length > IW_ESSID_MAX_SIZE) {
+	if (dwrq->length > IEEE80211_MAX_SSID_LEN) {
 		ret = -E2BIG;
 		goto out;
 	}
@@ -2086,7 +2158,7 @@
 	}
 
 	lbs_mesh_config(priv, CMD_ACT_MESH_CONFIG_START,
-			priv->curbssparams.channel);
+			priv->channel);
  out:
 	lbs_deb_leave_args(LBS_DEB_WEXT, "ret %d", ret);
 	return ret;
diff --git a/drivers/net/wireless/libertas/wext.h b/drivers/net/wireless/libertas/wext.h
index 4c08db4..7863baf 100644
--- a/drivers/net/wireless/libertas/wext.h
+++ b/drivers/net/wireless/libertas/wext.h
@@ -4,7 +4,15 @@
 #ifndef	_LBS_WEXT_H_
 #define	_LBS_WEXT_H_
 
+void lbs_send_disconnect_notification(struct lbs_private *priv);
+void lbs_send_mic_failureevent(struct lbs_private *priv, u32 event);
+
 extern struct iw_handler_def lbs_handler_def;
 extern struct iw_handler_def mesh_handler_def;
 
+struct chan_freq_power *lbs_find_cfp_by_band_and_channel(
+	struct lbs_private *priv,
+	u8 band,
+	u16 channel);
+
 #endif
diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig
index 83b635f..dce6520 100644
--- a/drivers/net/wireless/orinoco/Kconfig
+++ b/drivers/net/wireless/orinoco/Kconfig
@@ -1,8 +1,10 @@
 config HERMES
 	tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
 	depends on (PPC_PMAC || PCI || PCMCIA) && WLAN_80211
-	depends on CFG80211
+	depends on CFG80211 && CFG80211_WEXT
 	select WIRELESS_EXT
+	select WEXT_SPY
+	select WEXT_PRIV
 	select FW_LOADER
 	select CRYPTO
 	select CRYPTO_MICHAEL_MIC
diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c
index 359652d..404830f 100644
--- a/drivers/net/wireless/orinoco/hw.c
+++ b/drivers/net/wireless/orinoco/hw.c
@@ -60,8 +60,15 @@
 /* Set priv->firmware type, determine firmware properties
  * This function can be called before we have registerred with netdev,
  * so all errors go out with dev_* rather than printk
+ *
+ * If non-NULL stores a firmware description in fw_name.
+ * If non-NULL stores a HW version in hw_ver
+ *
+ * These are output via generic cfg80211 ethtool support.
  */
-int determine_fw_capabilities(struct orinoco_private *priv)
+int determine_fw_capabilities(struct orinoco_private *priv,
+			      char *fw_name, size_t fw_name_len,
+			      u32 *hw_ver)
 {
 	struct device *dev = priv->dev;
 	hermes_t *hw = &priv->hw;
@@ -85,6 +92,12 @@
 	dev_info(dev, "Hardware identity %04x:%04x:%04x:%04x\n",
 		 nic_id.id, nic_id.variant, nic_id.major, nic_id.minor);
 
+	if (hw_ver)
+		*hw_ver = (((nic_id.id & 0xff) << 24) |
+			   ((nic_id.variant & 0xff) << 16) |
+			   ((nic_id.major & 0xff) << 8) |
+			   (nic_id.minor & 0xff));
+
 	priv->firmware_type = determine_firmware_type(&nic_id);
 
 	/* Get the firmware version */
@@ -135,8 +148,9 @@
 	case FIRMWARE_TYPE_AGERE:
 		/* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
 		   ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Lucent/Agere %d.%02d",
+				 sta_id.major, sta_id.minor);
 
 		firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
 
@@ -185,8 +199,8 @@
 			tmp[SYMBOL_MAX_VER_LEN] = '\0';
 		}
 
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Symbol %s", tmp);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Symbol %s", tmp);
 
 		priv->has_ibss = (firmver >= 0x20000);
 		priv->has_wep = (firmver >= 0x15012);
@@ -224,9 +238,9 @@
 		 * different and less well tested */
 		/* D-Link MAC : 00:40:05:* */
 		/* Addtron MAC : 00:90:D1:* */
-		snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
-			 "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
-			 sta_id.variant);
+		if (fw_name)
+			snprintf(fw_name, fw_name_len, "Intersil %d.%d.%d",
+				 sta_id.major, sta_id.minor, sta_id.variant);
 
 		firmver = ((unsigned long)sta_id.major << 16) |
 			((unsigned long)sta_id.minor << 8) | sta_id.variant;
@@ -245,7 +259,8 @@
 		}
 		break;
 	}
-	dev_info(dev, "Firmware determined as %s\n", priv->fw_name);
+	if (fw_name)
+		dev_info(dev, "Firmware determined as %s\n", fw_name);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/orinoco/hw.h b/drivers/net/wireless/orinoco/hw.h
index 8df6e87..e2f7fdc 100644
--- a/drivers/net/wireless/orinoco/hw.h
+++ b/drivers/net/wireless/orinoco/hw.h
@@ -24,7 +24,8 @@
 struct orinoco_private;
 struct dev_addr_list;
 
-int determine_fw_capabilities(struct orinoco_private *priv);
+int determine_fw_capabilities(struct orinoco_private *priv, char *fw_name,
+			      size_t fw_name_len, u32 *hw_ver);
 int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr);
 int orinoco_hw_allocate_fid(struct orinoco_private *priv);
 int orinoco_get_bitratemode(int bitrate, int automatic);
diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c
index 7a32bcb..753a180 100644
--- a/drivers/net/wireless/orinoco/main.c
+++ b/drivers/net/wireless/orinoco/main.c
@@ -83,7 +83,6 @@
 #include <linux/device.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
-#include <linux/ethtool.h>
 #include <linux/suspend.h>
 #include <linux/if_arp.h>
 #include <linux/wireless.h>
@@ -162,8 +161,6 @@
 				 | HERMES_EV_WTERR | HERMES_EV_INFO \
 				 | HERMES_EV_INFDROP)
 
-static const struct ethtool_ops orinoco_ethtool_ops;
-
 /********************************************************************/
 /* Data types                                                       */
 /********************************************************************/
@@ -1994,7 +1991,9 @@
 		goto out;
 	}
 
-	err = determine_fw_capabilities(priv);
+	err = determine_fw_capabilities(priv, wiphy->fw_version,
+					sizeof(wiphy->fw_version),
+					&wiphy->hw_version);
 	if (err != 0) {
 		dev_err(dev, "Incompatible firmware, aborting\n");
 		goto out;
@@ -2010,7 +2009,9 @@
 			priv->do_fw_download = 0;
 
 		/* Check firmware version again */
-		err = determine_fw_capabilities(priv);
+		err = determine_fw_capabilities(priv, wiphy->fw_version,
+						sizeof(wiphy->fw_version),
+						&wiphy->hw_version);
 		if (err != 0) {
 			dev_err(dev, "Incompatible firmware, aborting\n");
 			goto out;
@@ -2212,7 +2213,6 @@
 	dev->ieee80211_ptr = wdev;
 	dev->netdev_ops = &orinoco_netdev_ops;
 	dev->watchdog_timeo = HZ; /* 1 second timeout */
-	dev->ethtool_ops = &orinoco_ethtool_ops;
 	dev->wireless_handlers = &orinoco_handler_def;
 #ifdef WIRELESS_SPY
 	dev->wireless_data = &priv->wireless_data;
@@ -2225,6 +2225,7 @@
 	netif_carrier_off(dev);
 
 	memcpy(dev->dev_addr, wiphy->perm_addr, ETH_ALEN);
+	memcpy(dev->perm_addr, wiphy->perm_addr, ETH_ALEN);
 
 	dev->base_addr = base_addr;
 	dev->irq = irq;
@@ -2348,27 +2349,6 @@
 }
 EXPORT_SYMBOL(orinoco_down);
 
-static void orinoco_get_drvinfo(struct net_device *dev,
-				struct ethtool_drvinfo *info)
-{
-	struct orinoco_private *priv = ndev_priv(dev);
-
-	strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
-	strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
-	strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
-	if (dev->dev.parent)
-		strncpy(info->bus_info, dev_name(dev->dev.parent),
-			sizeof(info->bus_info) - 1);
-	else
-		snprintf(info->bus_info, sizeof(info->bus_info) - 1,
-			 "PCMCIA %p", priv->hw.iobase);
-}
-
-static const struct ethtool_ops orinoco_ethtool_ops = {
-	.get_drvinfo = orinoco_get_drvinfo,
-	.get_link = ethtool_op_get_link,
-};
-
 /********************************************************************/
 /* Module initialization                                            */
 /********************************************************************/
diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h
index 9ac6f1d..665ef56 100644
--- a/drivers/net/wireless/orinoco/orinoco.h
+++ b/drivers/net/wireless/orinoco/orinoco.h
@@ -93,7 +93,6 @@
 
 	/* Capabilities of the hardware/firmware */
 	fwtype_t firmware_type;
-	char fw_name[32];
 	int ibss_port;
 	int nicbuf_size;
 	u16 channel_mask;
diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig
index ed1f997..390c0c7 100644
--- a/drivers/net/wireless/rt2x00/Kconfig
+++ b/drivers/net/wireless/rt2x00/Kconfig
@@ -53,6 +53,32 @@
 
 	  When compiled as a module, this driver will be called rt61pci.
 
+config RT2800PCI_PCI
+	tristate
+	depends on PCI
+	default y
+
+config RT2800PCI_SOC
+	tristate
+	depends on RALINK_RT288X || RALINK_RT305X
+	default y
+
+config RT2800PCI
+	tristate "Ralink rt2800 (PCI/PCMCIA) support"
+	depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL
+	select RT2X00_LIB_PCI if RT2800PCI_PCI
+	select RT2X00_LIB_SOC if RT2800PCI_SOC
+	select RT2X00_LIB_HT
+	select RT2X00_LIB_FIRMWARE
+	select RT2X00_LIB_CRYPTO
+	select CRC_CCITT
+	select EEPROM_93CX6
+	---help---
+	  This adds support for rt2800 wireless chipset family.
+	  Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052
+
+	  When compiled as a module, this driver will be called "rt2800pci.ko".
+
 config RT2500USB
 	tristate "Ralink rt2500 (USB) support"
 	depends on USB
@@ -95,6 +121,10 @@
 	tristate
 	select RT2X00_LIB
 
+config RT2X00_LIB_SOC
+	tristate
+	select RT2X00_LIB
+
 config RT2X00_LIB_USB
 	tristate
 	select RT2X00_LIB
diff --git a/drivers/net/wireless/rt2x00/Makefile b/drivers/net/wireless/rt2x00/Makefile
index 13043ea..912f5f6 100644
--- a/drivers/net/wireless/rt2x00/Makefile
+++ b/drivers/net/wireless/rt2x00/Makefile
@@ -11,10 +11,12 @@
 
 obj-$(CONFIG_RT2X00_LIB)		+= rt2x00lib.o
 obj-$(CONFIG_RT2X00_LIB_PCI)		+= rt2x00pci.o
+obj-$(CONFIG_RT2X00_LIB_SOC)		+= rt2x00soc.o
 obj-$(CONFIG_RT2X00_LIB_USB)		+= rt2x00usb.o
 obj-$(CONFIG_RT2400PCI)			+= rt2400pci.o
 obj-$(CONFIG_RT2500PCI)			+= rt2500pci.o
 obj-$(CONFIG_RT61PCI)			+= rt61pci.o
+obj-$(CONFIG_RT2800PCI)			+= rt2800pci.o
 obj-$(CONFIG_RT2500USB)			+= rt2500usb.o
 obj-$(CONFIG_RT73USB)			+= rt73usb.o
 obj-$(CONFIG_RT2800USB)			+= rt2800usb.o
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
new file mode 100644
index 0000000..be81788
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -0,0 +1,3323 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800pci
+	Abstract: rt2800pci device specific routines.
+	Supported chipsets: RT2800E & RT2800ED.
+ */
+
+#include <linux/crc-ccitt.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/eeprom_93cx6.h>
+
+#include "rt2x00.h"
+#include "rt2x00pci.h"
+#include "rt2x00soc.h"
+#include "rt2800pci.h"
+
+#ifdef CONFIG_RT2800PCI_PCI_MODULE
+#define CONFIG_RT2800PCI_PCI
+#endif
+
+#ifdef CONFIG_RT2800PCI_WISOC_MODULE
+#define CONFIG_RT2800PCI_WISOC
+#endif
+
+/*
+ * Allow hardware encryption to be disabled.
+ */
+static int modparam_nohwcrypt = 1;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
+ * Register access.
+ * BBP and RF register require indirect register access,
+ * and use the CSR registers PHY_CSR3 and PHY_CSR4 to achieve this.
+ * These indirect registers work with busy bits,
+ * and we will try maximal REGISTER_BUSY_COUNT times to access
+ * the register while taking a REGISTER_BUSY_DELAY us delay
+ * between each attampt. When the busy bit is still set at that time,
+ * the access attempt is considered to have failed,
+ * and we will print an error.
+ */
+#define WAIT_FOR_BBP(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RFCSR(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg))
+#define WAIT_FOR_RF(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg))
+#define WAIT_FOR_MCU(__dev, __reg) \
+	rt2x00pci_regbusy_read((__dev), H2M_MAILBOX_CSR, \
+			       H2M_MAILBOX_CSR_OWNER, (__reg))
+
+static void rt2800pci_bbp_write(struct rt2x00_dev *rt2x00dev,
+				const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_VALUE, value);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 0);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_bbp_read(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the BBP becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_BBP(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BUSY, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_READ_CONTROL, 1);
+		rt2x00_set_field32(&reg, BBP_CSR_CFG_BBP_RW_MODE, 1);
+
+		rt2x00pci_register_write(rt2x00dev, BBP_CSR_CFG, reg);
+
+		WAIT_FOR_BBP(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, BBP_CSR_CFG_VALUE);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rfcsr_write(struct rt2x00_dev *rt2x00dev,
+				  const unsigned int word, const u8 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_DATA, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 1);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rfcsr_read(struct rt2x00_dev *rt2x00dev,
+				 const unsigned int word, u8 *value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RFCSR becomes available, afterwards we
+	 * can safely write the read request into the register.
+	 * After the data has been written, we wait until hardware
+	 * returns the correct value, if at any time the register
+	 * doesn't become available in time, reg will be 0xffffffff
+	 * which means we return 0xff to the caller.
+	 */
+	if (WAIT_FOR_RFCSR(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG_REGNUM, word);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_WRITE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG_BUSY, 1);
+
+		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG, reg);
+
+		WAIT_FOR_RFCSR(rt2x00dev, &reg);
+	}
+
+	*value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA);
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_rf_write(struct rt2x00_dev *rt2x00dev,
+			       const unsigned int word, const u32 value)
+{
+	u32 reg;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the RF becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_RF(rt2x00dev, &reg)) {
+		reg = 0;
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_REG_VALUE_BW, value);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_STANDBYMODE, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_SEL, 0);
+		rt2x00_set_field32(&reg, RF_CSR_CFG0_BUSY, 1);
+
+		rt2x00pci_register_write(rt2x00dev, RF_CSR_CFG0, reg);
+		rt2x00_rf_write(rt2x00dev, word, value);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_mcu_request(struct rt2x00_dev *rt2x00dev,
+				  const u8 command, const u8 token,
+				  const u8 arg0, const u8 arg1)
+{
+	u32 reg;
+
+	/*
+	 * RT2880 and RT3052 don't support MCU requests.
+	 */
+	if (rt2x00_rt(&rt2x00dev->chip, RT2880) ||
+	    rt2x00_rt(&rt2x00dev->chip, RT3052))
+		return;
+
+	mutex_lock(&rt2x00dev->csr_mutex);
+
+	/*
+	 * Wait until the MCU becomes available, afterwards we
+	 * can safely write the new data into the register.
+	 */
+	if (WAIT_FOR_MCU(rt2x00dev, &reg)) {
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_OWNER, 1);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_CMD_TOKEN, token);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG0, arg0);
+		rt2x00_set_field32(&reg, H2M_MAILBOX_CSR_ARG1, arg1);
+		rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, reg);
+
+		reg = 0;
+		rt2x00_set_field32(&reg, HOST_CMD_CSR_HOST_COMMAND, command);
+		rt2x00pci_register_write(rt2x00dev, HOST_CMD_CSR, reg);
+	}
+
+	mutex_unlock(&rt2x00dev->csr_mutex);
+}
+
+static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < 200; i++) {
+		rt2x00pci_register_read(rt2x00dev, H2M_MAILBOX_CID, &reg);
+
+		if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) ||
+		    (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token))
+			break;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	if (i == 200)
+		ERROR(rt2x00dev, "MCU request failed, no response from hardware\n");
+
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0);
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0);
+}
+
+#ifdef CONFIG_RT2800PCI_WISOC
+static void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
+{
+	u32 *base_addr = (u32 *) KSEG1ADDR(0x1F040000); /* XXX for RT3052 */
+
+	memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE);
+}
+#else
+static inline void rt2800pci_read_eeprom_soc(struct rt2x00_dev *rt2x00dev)
+{
+}
+#endif /* CONFIG_RT2800PCI_WISOC */
+
+#ifdef CONFIG_RT2800PCI_PCI
+static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
+
+	eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN);
+	eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT);
+	eeprom->reg_data_clock =
+	    !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK);
+	eeprom->reg_chip_select =
+	    !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT);
+}
+
+static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
+{
+	struct rt2x00_dev *rt2x00dev = eeprom->data;
+	u32 reg = 0;
+
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in);
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out);
+	rt2x00_set_field32(&reg, E2PROM_CSR_DATA_CLOCK,
+			   !!eeprom->reg_data_clock);
+	rt2x00_set_field32(&reg, E2PROM_CSR_CHIP_SELECT,
+			   !!eeprom->reg_chip_select);
+
+	rt2x00pci_register_write(rt2x00dev, E2PROM_CSR, reg);
+}
+
+static void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
+{
+	struct eeprom_93cx6 eeprom;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, E2PROM_CSR, &reg);
+
+	eeprom.data = rt2x00dev;
+	eeprom.register_read = rt2800pci_eepromregister_read;
+	eeprom.register_write = rt2800pci_eepromregister_write;
+	eeprom.width = !rt2x00_get_field32(reg, E2PROM_CSR_TYPE) ?
+	    PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
+	eeprom.reg_data_in = 0;
+	eeprom.reg_data_out = 0;
+	eeprom.reg_data_clock = 0;
+	eeprom.reg_chip_select = 0;
+
+	eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
+			       EEPROM_SIZE / sizeof(u16));
+}
+
+static void rt2800pci_efuse_read(struct rt2x00_dev *rt2x00dev,
+				 unsigned int i)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, EFUSE_CTRL, &reg);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_ADDRESS_IN, i);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_MODE, 0);
+	rt2x00_set_field32(&reg, EFUSE_CTRL_KICK, 1);
+	rt2x00pci_register_write(rt2x00dev, EFUSE_CTRL, reg);
+
+	/* Wait until the EEPROM has been loaded */
+	rt2x00pci_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
+
+	/* Apparently the data is read from end to start */
+	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA3,
+				(u32 *)&rt2x00dev->eeprom[i]);
+	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA2,
+				(u32 *)&rt2x00dev->eeprom[i + 2]);
+	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA1,
+				(u32 *)&rt2x00dev->eeprom[i + 4]);
+	rt2x00pci_register_read(rt2x00dev, EFUSE_DATA0,
+				(u32 *)&rt2x00dev->eeprom[i + 6]);
+}
+
+static void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < EEPROM_SIZE / sizeof(u16); i += 8)
+		rt2800pci_efuse_read(rt2x00dev, i);
+}
+#else
+static inline void rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev)
+{
+}
+
+static inline void rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
+{
+}
+#endif /* CONFIG_RT2800PCI_PCI */
+
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+static const struct rt2x00debug rt2800pci_rt2x00debug = {
+	.owner	= THIS_MODULE,
+	.csr	= {
+		.read		= rt2x00pci_register_read,
+		.write		= rt2x00pci_register_write,
+		.flags		= RT2X00DEBUGFS_OFFSET,
+		.word_base	= CSR_REG_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= CSR_REG_SIZE / sizeof(u32),
+	},
+	.eeprom	= {
+		.read		= rt2x00_eeprom_read,
+		.write		= rt2x00_eeprom_write,
+		.word_base	= EEPROM_BASE,
+		.word_size	= sizeof(u16),
+		.word_count	= EEPROM_SIZE / sizeof(u16),
+	},
+	.bbp	= {
+		.read		= rt2800pci_bbp_read,
+		.write		= rt2800pci_bbp_write,
+		.word_base	= BBP_BASE,
+		.word_size	= sizeof(u8),
+		.word_count	= BBP_SIZE / sizeof(u8),
+	},
+	.rf	= {
+		.read		= rt2x00_rf_read,
+		.write		= rt2800pci_rf_write,
+		.word_base	= RF_BASE,
+		.word_size	= sizeof(u32),
+		.word_count	= RF_SIZE / sizeof(u32),
+	},
+};
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+
+static int rt2800pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	return rt2x00_get_field32(reg, GPIO_CTRL_CFG_BIT2);
+}
+
+#ifdef CONFIG_RT2X00_LIB_LEDS
+static void rt2800pci_brightness_set(struct led_classdev *led_cdev,
+				     enum led_brightness brightness)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	unsigned int enabled = brightness != LED_OFF;
+	unsigned int bg_mode =
+	    (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
+	unsigned int polarity =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_POLARITY);
+	unsigned int ledmode =
+		rt2x00_get_field16(led->rt2x00dev->led_mcu_reg,
+				   EEPROM_FREQ_LED_MODE);
+
+	if (led->type == LED_TYPE_RADIO) {
+		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? 0x20 : 0);
+	} else if (led->type == LED_TYPE_ASSOC) {
+		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED, 0xff, ledmode,
+				      enabled ? (bg_mode ? 0x60 : 0xa0) : 0x20);
+	} else if (led->type == LED_TYPE_QUALITY) {
+		/*
+		 * The brightness is divided into 6 levels (0 - 5),
+		 * The specs tell us the following levels:
+		 *	0, 1 ,3, 7, 15, 31
+		 * to determine the level in a simple way we can simply
+		 * work with bitshifting:
+		 *	(1 << level) - 1
+		 */
+		rt2800pci_mcu_request(led->rt2x00dev, MCU_LED_STRENGTH, 0xff,
+				      (1 << brightness / (LED_FULL / 6)) - 1,
+				      polarity);
+	}
+}
+
+static int rt2800pci_blink_set(struct led_classdev *led_cdev,
+			       unsigned long *delay_on,
+			       unsigned long *delay_off)
+{
+	struct rt2x00_led *led =
+	    container_of(led_cdev, struct rt2x00_led, led_dev);
+	u32 reg;
+
+	rt2x00pci_register_read(led->rt2x00dev, LED_CFG, &reg);
+	rt2x00_set_field32(&reg, LED_CFG_ON_PERIOD, *delay_on);
+	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
+	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
+	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
+	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
+	rt2x00pci_register_write(led->rt2x00dev, LED_CFG, reg);
+
+	return 0;
+}
+
+static void rt2800pci_init_led(struct rt2x00_dev *rt2x00dev,
+			       struct rt2x00_led *led,
+			       enum led_type type)
+{
+	led->rt2x00dev = rt2x00dev;
+	led->type = type;
+	led->led_dev.brightness_set = rt2800pci_brightness_set;
+	led->led_dev.blink_set = rt2800pci_blink_set;
+	led->flags = LED_INITIALIZED;
+}
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+/*
+ * Configuration handlers.
+ */
+static void rt2800pci_config_wcid_attr(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct mac_wcid_entry wcid_entry;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+	u32 reg;
+
+	offset = MAC_WCID_ATTR_ENTRY(key->hw_key_idx);
+
+	rt2x00pci_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_KEYTAB,
+			   !!(key->flags & IEEE80211_KEY_FLAG_PAIRWISE));
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_CIPHER,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_BSS_IDX,
+			   (crypto->cmd == SET_KEY) * crypto->bssidx);
+	rt2x00_set_field32(&reg, MAC_WCID_ATTRIBUTE_RX_WIUDF, crypto->cipher);
+	rt2x00pci_register_write(rt2x00dev, offset, reg);
+
+	offset = MAC_IVEIV_ENTRY(key->hw_key_idx);
+
+	memset(&iveiv_entry, 0, sizeof(iveiv_entry));
+	if ((crypto->cipher == CIPHER_TKIP) ||
+	    (crypto->cipher == CIPHER_TKIP_NO_MIC) ||
+	    (crypto->cipher == CIPHER_AES))
+		iveiv_entry.iv[3] |= 0x20;
+	iveiv_entry.iv[3] |= key->keyidx << 6;
+	rt2x00pci_register_multiwrite(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	offset = MAC_WCID_ENTRY(key->hw_key_idx);
+
+	memset(&wcid_entry, 0, sizeof(wcid_entry));
+	if (crypto->cmd == SET_KEY)
+		memcpy(&wcid_entry, crypto->address, ETH_ALEN);
+	rt2x00pci_register_multiwrite(rt2x00dev, offset,
+				      &wcid_entry, sizeof(wcid_entry));
+}
+
+static int rt2800pci_config_shared_key(struct rt2x00_dev *rt2x00dev,
+				       struct rt2x00lib_crypto *crypto,
+				       struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	struct rt2x00_field32 field;
+	u32 offset;
+	u32 reg;
+
+	if (crypto->cmd == SET_KEY) {
+		key->hw_key_idx = (4 * crypto->bssidx) + key->keyidx;
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = SHARED_KEY_ENTRY(key->hw_key_idx);
+		rt2x00pci_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * The cipher types are stored over multiple registers
+	 * starting with SHARED_KEY_MODE_BASE each word will have
+	 * 32 bits and contains the cipher types for 2 bssidx each.
+	 * Using the correct defines correctly will cause overhead,
+	 * so just calculate the correct offset.
+	 */
+	field.bit_offset = 4 * (key->hw_key_idx % 8);
+	field.bit_mask = 0x7 << field.bit_offset;
+
+	offset = SHARED_KEY_MODE_ENTRY(key->hw_key_idx / 8);
+
+	rt2x00pci_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field,
+			   (crypto->cmd == SET_KEY) * crypto->cipher);
+	rt2x00pci_register_write(rt2x00dev, offset, reg);
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static int rt2800pci_config_pairwise_key(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_crypto *crypto,
+					 struct ieee80211_key_conf *key)
+{
+	struct hw_key_entry key_entry;
+	u32 offset;
+
+	if (crypto->cmd == SET_KEY) {
+		/*
+		 * 1 pairwise key is possible per AID, this means that the AID
+		 * equals our hw_key_idx. Make sure the WCID starts _after_ the
+		 * last possible shared key entry.
+		 */
+		if (crypto->aid > (256 - 32))
+			return -ENOSPC;
+
+		key->hw_key_idx = 32 + crypto->aid;
+
+
+		memcpy(key_entry.key, crypto->key,
+		       sizeof(key_entry.key));
+		memcpy(key_entry.tx_mic, crypto->tx_mic,
+		       sizeof(key_entry.tx_mic));
+		memcpy(key_entry.rx_mic, crypto->rx_mic,
+		       sizeof(key_entry.rx_mic));
+
+		offset = PAIRWISE_KEY_ENTRY(key->hw_key_idx);
+		rt2x00pci_register_multiwrite(rt2x00dev, offset,
+					      &key_entry, sizeof(key_entry));
+	}
+
+	/*
+	 * Update WCID information
+	 */
+	rt2800pci_config_wcid_attr(rt2x00dev, crypto, key);
+
+	return 0;
+}
+
+static void rt2800pci_config_filter(struct rt2x00_dev *rt2x00dev,
+				    const unsigned int filter_flags)
+{
+	u32 reg;
+
+	/*
+	 * Start configuration steps.
+	 * Note that the version error will always be dropped
+	 * and broadcast frames will always be accepted since
+	 * there is no filter for it at this time.
+	 */
+	rt2x00pci_register_read(rt2x00dev, RX_FILTER_CFG, &reg);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CRC_ERROR,
+			   !(filter_flags & FIF_FCSFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PHY_ERROR,
+			   !(filter_flags & FIF_PLCPFAIL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_TO_ME,
+			   !(filter_flags & FIF_PROMISC_IN_BSS));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_NOT_MY_BSSD, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_VER_ERROR, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_MULTICAST,
+			   !(filter_flags & FIF_ALLMULTI));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BROADCAST, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_DUPLICATE, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CF_END,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_ACK,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_RTS,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_PSPOLL,
+			   !(filter_flags & FIF_PSPOLL));
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BA, 1);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_BAR, 0);
+	rt2x00_set_field32(&reg, RX_FILTER_CFG_DROP_CNTL,
+			   !(filter_flags & FIF_CONTROL));
+	rt2x00pci_register_write(rt2x00dev, RX_FILTER_CFG, reg);
+}
+
+static void rt2800pci_config_intf(struct rt2x00_dev *rt2x00dev,
+				  struct rt2x00_intf *intf,
+				  struct rt2x00intf_conf *conf,
+				  const unsigned int flags)
+{
+	unsigned int beacon_base;
+	u32 reg;
+
+	if (flags & CONFIG_UPDATE_TYPE) {
+		/*
+		 * Clear current synchronisation setup.
+		 * For the Beacon base registers we only need to clear
+		 * the first byte since that byte contains the VALID and OWNER
+		 * bits which (when set to 0) will invalidate the entire beacon.
+		 */
+		beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
+		rt2x00pci_register_write(rt2x00dev, beacon_base, 0);
+
+		/*
+		 * Enable synchronisation.
+		 */
+		rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, conf->sync);
+		rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+		rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+	}
+
+	if (flags & CONFIG_UPDATE_MAC) {
+		reg = le32_to_cpu(conf->mac[1]);
+		rt2x00_set_field32(&reg, MAC_ADDR_DW1_UNICAST_TO_ME_MASK, 0xff);
+		conf->mac[1] = cpu_to_le32(reg);
+
+		rt2x00pci_register_multiwrite(rt2x00dev, MAC_ADDR_DW0,
+					      conf->mac, sizeof(conf->mac));
+	}
+
+	if (flags & CONFIG_UPDATE_BSSID) {
+		reg = le32_to_cpu(conf->bssid[1]);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_ID_MASK, 0);
+		rt2x00_set_field32(&reg, MAC_BSSID_DW1_BSS_BCN_NUM, 0);
+		conf->bssid[1] = cpu_to_le32(reg);
+
+		rt2x00pci_register_multiwrite(rt2x00dev, MAC_BSSID_DW0,
+					      conf->bssid, sizeof(conf->bssid));
+	}
+}
+
+static void rt2800pci_config_erp(struct rt2x00_dev *rt2x00dev,
+				 struct rt2x00lib_erp *erp)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_RX_ACK_TIMEOUT, 0x20);
+	rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_BAC_ACK_POLICY,
+			   !!erp->short_preamble);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AR_PREAMBLE,
+			   !!erp->short_preamble);
+	rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL,
+			   erp->cts_protection ? 2 : 0);
+	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE,
+				 erp->basic_rates);
+	rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00pci_register_read(rt2x00dev, BKOFF_SLOT_CFG, &reg);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_SLOT_TIME, erp->slot_time);
+	rt2x00_set_field32(&reg, BKOFF_SLOT_CFG_CC_DELAY_TIME, 2);
+	rt2x00pci_register_write(rt2x00dev, BKOFF_SLOT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, XIFS_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_CCKM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_SIFS_TIME, erp->sifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_OFDM_XIFS_TIME, 4);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_EIFS, erp->eifs);
+	rt2x00_set_field32(&reg, XIFS_TIME_CFG_BB_RXEND_ENABLE, 1);
+	rt2x00pci_register_write(rt2x00dev, XIFS_TIME_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL,
+			   erp->beacon_int * 16);
+	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+}
+
+static void rt2800pci_config_ant(struct rt2x00_dev *rt2x00dev,
+				 struct antenna_setup *ant)
+{
+	u8 r1;
+	u8 r3;
+
+	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
+	rt2800pci_bbp_read(rt2x00dev, 3, &r3);
+
+	/*
+	 * Configure the TX antenna.
+	 */
+	switch ((int)ant->tx) {
+	case 1:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 0);
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r1, BBP1_TX_ANTENNA, 2);
+		break;
+	case 3:
+		/* Do nothing */
+		break;
+	}
+
+	/*
+	 * Configure the RX antenna.
+	 */
+	switch ((int)ant->rx) {
+	case 1:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 0);
+		break;
+	case 2:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 1);
+		break;
+	case 3:
+		rt2x00_set_field8(&r3, BBP3_RX_ANTENNA, 2);
+		break;
+	}
+
+	rt2800pci_bbp_write(rt2x00dev, 3, r3);
+	rt2800pci_bbp_write(rt2x00dev, 1, r1);
+}
+
+static void rt2800pci_config_lna_gain(struct rt2x00_dev *rt2x00dev,
+				      struct rt2x00lib_conf *libconf)
+{
+	u16 eeprom;
+	short lna_gain;
+
+	if (libconf->rf.channel <= 14) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_BG);
+	} else if (libconf->rf.channel <= 64) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0);
+	} else if (libconf->rf.channel <= 128) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_BG2_LNA_A1);
+	} else {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &eeprom);
+		lna_gain = rt2x00_get_field16(eeprom, EEPROM_RSSI_A2_LNA_A2);
+	}
+
+	rt2x00dev->lna_gain = lna_gain;
+}
+
+static void rt2800pci_config_channel_rt2x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
+
+	if (rt2x00dev->default_ant.tx == 1)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_TX1, 1);
+
+	if (rt2x00dev->default_ant.rx == 1) {
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX1, 1);
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+	} else if (rt2x00dev->default_ant.rx == 2)
+		rt2x00_set_field32(&rf->rf2, RF2_ANTENNA_RX2, 1);
+
+	if (rf->channel > 14) {
+		/*
+		 * When TX power is below 0, we should increase it by 7 to
+		 * make it a positive value (Minumum value is -7).
+		 * However this means that values between 0 and 7 have
+		 * double meaning, and we should set a 7DBm boost flag.
+		 */
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power1 >= 0));
+
+		if (info->tx_power1 < 0)
+			info->tx_power1 += 7;
+
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power1));
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A_7DBM_BOOST,
+				   (info->tx_power2 >= 0));
+
+		if (info->tx_power2 < 0)
+			info->tx_power2 += 7;
+
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_A,
+				   TXPOWER_A_TO_DEV(info->tx_power2));
+	} else {
+		rt2x00_set_field32(&rf->rf3, RF3_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power1));
+		rt2x00_set_field32(&rf->rf4, RF4_TXPOWER_G,
+				   TXPOWER_G_TO_DEV(info->tx_power2));
+	}
+
+	rt2x00_set_field32(&rf->rf4, RF4_HT40, conf_is_ht40(conf));
+
+	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
+	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
+
+	udelay(200);
+
+	rt2800pci_rf_write(rt2x00dev, 1, rf->rf1);
+	rt2800pci_rf_write(rt2x00dev, 2, rf->rf2);
+	rt2800pci_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
+	rt2800pci_rf_write(rt2x00dev, 4, rf->rf4);
+}
+
+static void rt2800pci_config_channel_rt3x(struct rt2x00_dev *rt2x00dev,
+					  struct ieee80211_conf *conf,
+					  struct rf_channel *rf,
+					  struct channel_info *info)
+{
+	u8 rfcsr;
+
+	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf1);
+	rt2800pci_rfcsr_write(rt2x00dev, 2, rf->rf3);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 6, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR6_R, rf->rf2);
+	rt2800pci_rfcsr_write(rt2x00dev, 6, rfcsr);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 12, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR12_TX_POWER,
+			  TXPOWER_G_TO_DEV(info->tx_power1));
+	rt2800pci_rfcsr_write(rt2x00dev, 12, rfcsr);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset);
+	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+
+	rt2800pci_rfcsr_write(rt2x00dev, 24,
+			      rt2x00dev->calibration[conf_is_ht40(conf)]);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 23, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR7_RF_TUNING, 1);
+	rt2800pci_rfcsr_write(rt2x00dev, 23, rfcsr);
+}
+
+static void rt2800pci_config_channel(struct rt2x00_dev *rt2x00dev,
+				     struct ieee80211_conf *conf,
+				     struct rf_channel *rf,
+				     struct channel_info *info)
+{
+	u32 reg;
+	unsigned int tx_pin;
+	u8 bbp;
+
+	if (rt2x00_rev(&rt2x00dev->chip) != RT3070_VERSION)
+		rt2800pci_config_channel_rt2x(rt2x00dev, conf, rf, info);
+	else
+		rt2800pci_config_channel_rt3x(rt2x00dev, conf, rf, info);
+
+	/*
+	 * Change BBP settings
+	 */
+	rt2800pci_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain);
+	rt2800pci_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain);
+	rt2800pci_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain);
+	rt2800pci_bbp_write(rt2x00dev, 86, 0);
+
+	if (rf->channel <= 14) {
+		if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
+			rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
+			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
+		} else {
+			rt2800pci_bbp_write(rt2x00dev, 82, 0x84);
+			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
+		}
+	} else {
+		rt2800pci_bbp_write(rt2x00dev, 82, 0xf2);
+
+		if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags))
+			rt2800pci_bbp_write(rt2x00dev, 75, 0x46);
+		else
+			rt2800pci_bbp_write(rt2x00dev, 75, 0x50);
+	}
+
+	rt2x00pci_register_read(rt2x00dev, TX_BAND_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2x00_set_field32(&reg, TX_BAND_CFG_A, rf->channel > 14);
+	rt2x00_set_field32(&reg, TX_BAND_CFG_BG, rf->channel <= 14);
+	rt2x00pci_register_write(rt2x00dev, TX_BAND_CFG, reg);
+
+	tx_pin = 0;
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.tx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G1_EN, 1);
+	}
+
+	/* Turn on unused PA or LNA when not using 1T or 1R */
+	if (rt2x00dev->default_ant.rx != 1) {
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A1_EN, 1);
+		rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G1_EN, 1);
+	}
+
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_A0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_LNA_PE_G0_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_G0_EN, rf->channel <= 14);
+	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_PA_PE_A0_EN, rf->channel > 14);
+
+	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
+
+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800pci_bbp_read(rt2x00dev, 3, &bbp);
+	rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf));
+	rt2800pci_bbp_write(rt2x00dev, 3, bbp);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		if (conf_is_ht40(conf)) {
+			rt2800pci_bbp_write(rt2x00dev, 69, 0x1a);
+			rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
+			rt2800pci_bbp_write(rt2x00dev, 73, 0x16);
+		} else {
+			rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+			rt2800pci_bbp_write(rt2x00dev, 70, 0x08);
+			rt2800pci_bbp_write(rt2x00dev, 73, 0x11);
+		}
+	}
+
+	msleep(1);
+}
+
+static void rt2800pci_config_txpower(struct rt2x00_dev *rt2x00dev,
+				     const int txpower)
+{
+	u32 reg;
+	u32 value = TXPOWER_G_TO_DEV(txpower);
+	u8 r1;
+
+	rt2800pci_bbp_read(rt2x00dev, 1, &r1);
+	rt2x00_set_field8(&reg, BBP1_TX_POWER, 0);
+	rt2800pci_bbp_write(rt2x00dev, 1, r1);
+
+	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_0, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_1MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_2MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_55MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_11MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_6MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_9MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_12MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_0_18MBS, value);
+	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_0, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_1, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_24MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_36MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_48MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_54MBS, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS0, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_1_MCS3, value);
+	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_2, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS4, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS8, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS9, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS10, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_2_MCS11, value);
+	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_2, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_3, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS12, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS13, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS14, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_MCS15, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN1, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN2, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN3, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_3_UKNOWN4, value);
+	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_3, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TX_PWR_CFG_4, &reg);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN5, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN6, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN7, value);
+	rt2x00_set_field32(&reg, TX_PWR_CFG_4_UKNOWN8, value);
+	rt2x00pci_register_write(rt2x00dev, TX_PWR_CFG_4, reg);
+}
+
+static void rt2800pci_config_retry_limit(struct rt2x00_dev *rt2x00dev,
+					 struct rt2x00lib_conf *libconf)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, TX_RTY_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_SHORT_RTY_LIMIT,
+			   libconf->conf->short_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_LIMIT,
+			   libconf->conf->long_frame_max_tx_count);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_LONG_RTY_THRE, 2000);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_NON_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_AGG_RTY_MODE, 0);
+	rt2x00_set_field32(&reg, TX_RTY_CFG_TX_AUTO_FB_ENABLE, 1);
+	rt2x00pci_register_write(rt2x00dev, TX_RTY_CFG, reg);
+}
+
+static void rt2800pci_config_ps(struct rt2x00_dev *rt2x00dev,
+				struct rt2x00lib_conf *libconf)
+{
+	enum dev_state state =
+	    (libconf->conf->flags & IEEE80211_CONF_PS) ?
+		STATE_SLEEP : STATE_AWAKE;
+	u32 reg;
+
+	if (state == STATE_SLEEP) {
+		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0);
+
+		rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 5);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE,
+				   libconf->conf->listen_interval - 1);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 1);
+		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+	} else {
+		rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
+
+		rt2x00pci_register_read(rt2x00dev, AUTOWAKEUP_CFG, &reg);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTO_LEAD_TIME, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE, 0);
+		rt2x00_set_field32(&reg, AUTOWAKEUP_CFG_AUTOWAKE, 0);
+		rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, reg);
+	}
+}
+
+static void rt2800pci_config(struct rt2x00_dev *rt2x00dev,
+			     struct rt2x00lib_conf *libconf,
+			     const unsigned int flags)
+{
+	/* Always recalculate LNA gain before changing configuration */
+	rt2800pci_config_lna_gain(rt2x00dev, libconf);
+
+	if (flags & IEEE80211_CONF_CHANGE_CHANNEL)
+		rt2800pci_config_channel(rt2x00dev, libconf->conf,
+					 &libconf->rf, &libconf->channel);
+	if (flags & IEEE80211_CONF_CHANGE_POWER)
+		rt2800pci_config_txpower(rt2x00dev, libconf->conf->power_level);
+	if (flags & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
+		rt2800pci_config_retry_limit(rt2x00dev, libconf);
+	if (flags & IEEE80211_CONF_CHANGE_PS)
+		rt2800pci_config_ps(rt2x00dev, libconf);
+}
+
+/*
+ * Link tuning
+ */
+static void rt2800pci_link_stats(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual)
+{
+	u32 reg;
+
+	/*
+	 * Update FCS error count from register.
+	 */
+	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	qual->rx_failed = rt2x00_get_field32(reg, RX_STA_CNT0_CRC_ERR);
+}
+
+static u8 rt2800pci_get_default_vgc(struct rt2x00_dev *rt2x00dev)
+{
+	if (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ)
+		return 0x2e + rt2x00dev->lna_gain;
+
+	if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags))
+		return 0x32 + (rt2x00dev->lna_gain * 5) / 3;
+	else
+		return 0x3a + (rt2x00dev->lna_gain * 5) / 3;
+}
+
+static inline void rt2800pci_set_vgc(struct rt2x00_dev *rt2x00dev,
+				     struct link_qual *qual, u8 vgc_level)
+{
+	if (qual->vgc_level != vgc_level) {
+		rt2800pci_bbp_write(rt2x00dev, 66, vgc_level);
+		qual->vgc_level = vgc_level;
+		qual->vgc_level_reg = vgc_level;
+	}
+}
+
+static void rt2800pci_reset_tuner(struct rt2x00_dev *rt2x00dev,
+				  struct link_qual *qual)
+{
+	rt2800pci_set_vgc(rt2x00dev, qual,
+			  rt2800pci_get_default_vgc(rt2x00dev));
+}
+
+static void rt2800pci_link_tuner(struct rt2x00_dev *rt2x00dev,
+				 struct link_qual *qual, const u32 count)
+{
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION)
+		return;
+
+	/*
+	 * When RSSI is better then -80 increase VGC level with 0x10
+	 */
+	rt2800pci_set_vgc(rt2x00dev, qual,
+			  rt2800pci_get_default_vgc(rt2x00dev) +
+			  ((qual->rssi > -80) * 0x10));
+}
+
+/*
+ * Firmware functions
+ */
+static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev)
+{
+	return FIRMWARE_RT2860;
+}
+
+static int rt2800pci_check_firmware(struct rt2x00_dev *rt2x00dev,
+				    const u8 *data, const size_t len)
+{
+	u16 fw_crc;
+	u16 crc;
+
+	/*
+	 * Only support 8kb firmware files.
+	 */
+	if (len != 8192)
+		return FW_BAD_LENGTH;
+
+	/*
+	 * The last 2 bytes in the firmware array are the crc checksum itself,
+	 * this means that we should never pass those 2 bytes to the crc
+	 * algorithm.
+	 */
+	fw_crc = (data[len - 2] << 8 | data[len - 1]);
+
+	/*
+	 * Use the crc ccitt algorithm.
+	 * This will return the same value as the legacy driver which
+	 * used bit ordering reversion on the both the firmware bytes
+	 * before input input as well as on the final output.
+	 * Obviously using crc ccitt directly is much more efficient.
+	 */
+	crc = crc_ccitt(~0, data, len - 2);
+
+	/*
+	 * There is a small difference between the crc-itu-t + bitrev and
+	 * the crc-ccitt crc calculation. In the latter method the 2 bytes
+	 * will be swapped, use swab16 to convert the crc to the correct
+	 * value.
+	 */
+	crc = swab16(crc);
+
+	return (fw_crc == crc) ? FW_OK : FW_BAD_CRC;
+}
+
+static int rt2800pci_load_firmware(struct rt2x00_dev *rt2x00dev,
+				   const u8 *data, const size_t len)
+{
+	unsigned int i;
+	u32 reg;
+
+	/*
+	 * Wait for stable hardware.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+		if (reg && reg != ~0)
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "Unstable hardware.\n");
+		return -EBUSY;
+	}
+
+	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000002);
+	rt2x00pci_register_write(rt2x00dev, AUTOWAKEUP_CFG, 0x00000000);
+
+	/*
+	 * Disable DMA, will be reenabled later when enabling
+	 * the radio.
+	 */
+	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	/*
+	 * enable Host program ram write selection
+	 */
+	reg = 0;
+	rt2x00_set_field32(&reg, PBF_SYS_CTRL_HOST_RAM_WRITE, 1);
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, reg);
+
+	/*
+	 * Write firmware to device.
+	 */
+	rt2x00pci_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE,
+				      data, len);
+
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000);
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001);
+
+	/*
+	 * Wait for device to stabilize.
+	 */
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, PBF_SYS_CTRL, &reg);
+		if (rt2x00_get_field32(reg, PBF_SYS_CTRL_READY))
+			break;
+		msleep(1);
+	}
+
+	if (i == REGISTER_BUSY_COUNT) {
+		ERROR(rt2x00dev, "PBF system register not ready.\n");
+		return -EBUSY;
+	}
+
+	/*
+	 * Disable interrupts
+	 */
+	rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_IRQ_OFF);
+
+	/*
+	 * Initialize BBP R/W access agent
+	 */
+	rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+
+	return 0;
+}
+
+/*
+ * Initialization functions.
+ */
+static bool rt2800pci_get_entry_state(struct queue_entry *entry)
+{
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	u32 word;
+
+	if (entry->queue->qid == QID_RX) {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+
+		return (!rt2x00_get_field32(word, RXD_W1_DMA_DONE));
+	} else {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+
+		return (!rt2x00_get_field32(word, TXD_W1_DMA_DONE));
+	}
+}
+
+static void rt2800pci_clear_entry(struct queue_entry *entry)
+{
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	u32 word;
+
+	if (entry->queue->qid == QID_RX) {
+		rt2x00_desc_read(entry_priv->desc, 0, &word);
+		rt2x00_set_field32(&word, RXD_W0_SDP0, skbdesc->skb_dma);
+		rt2x00_desc_write(entry_priv->desc, 0, word);
+
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+		rt2x00_set_field32(&word, RXD_W1_DMA_DONE, 0);
+		rt2x00_desc_write(entry_priv->desc, 1, word);
+	} else {
+		rt2x00_desc_read(entry_priv->desc, 1, &word);
+		rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 1);
+		rt2x00_desc_write(entry_priv->desc, 1, word);
+	}
+}
+
+static int rt2800pci_init_queues(struct rt2x00_dev *rt2x00dev)
+{
+	struct queue_entry_priv_pci *entry_priv;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
+	/*
+	 * Initialize registers.
+	 */
+	entry_priv = rt2x00dev->tx[0].entries[0].priv_data;
+	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR0, entry_priv->desc_dma);
+	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT0, rt2x00dev->tx[0].limit);
+	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX0, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX0, 0);
+
+	entry_priv = rt2x00dev->tx[1].entries[0].priv_data;
+	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR1, entry_priv->desc_dma);
+	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT1, rt2x00dev->tx[1].limit);
+	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX1, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX1, 0);
+
+	entry_priv = rt2x00dev->tx[2].entries[0].priv_data;
+	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR2, entry_priv->desc_dma);
+	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT2, rt2x00dev->tx[2].limit);
+	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX2, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX2, 0);
+
+	entry_priv = rt2x00dev->tx[3].entries[0].priv_data;
+	rt2x00pci_register_write(rt2x00dev, TX_BASE_PTR3, entry_priv->desc_dma);
+	rt2x00pci_register_write(rt2x00dev, TX_MAX_CNT3, rt2x00dev->tx[3].limit);
+	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX3, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_DTX_IDX3, 0);
+
+	entry_priv = rt2x00dev->rx->entries[0].priv_data;
+	rt2x00pci_register_write(rt2x00dev, RX_BASE_PTR, entry_priv->desc_dma);
+	rt2x00pci_register_write(rt2x00dev, RX_MAX_CNT, rt2x00dev->rx[0].limit);
+	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, rt2x00dev->rx[0].limit - 1);
+	rt2x00pci_register_write(rt2x00dev, RX_DRX_IDX, 0);
+
+	/*
+	 * Enable global DMA configuration
+	 */
+	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, DELAY_INT_CFG, 0);
+
+	return 0;
+}
+
+static int rt2800pci_init_registers(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	unsigned int i;
+
+	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_CSR, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_RESET_BBP, 1);
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00pci_register_read(rt2x00dev, BCN_OFFSET0, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN0, 0xe0); /* 0x3800 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN1, 0xe8); /* 0x3a00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN2, 0xf0); /* 0x3c00 */
+	rt2x00_set_field32(&reg, BCN_OFFSET0_BCN3, 0xf8); /* 0x3e00 */
+	rt2x00pci_register_write(rt2x00dev, BCN_OFFSET0, reg);
+
+	rt2x00pci_register_read(rt2x00dev, BCN_OFFSET1, &reg);
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN4, 0xc8); /* 0x3200 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN5, 0xd0); /* 0x3400 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN6, 0x77); /* 0x1dc0 */
+	rt2x00_set_field32(&reg, BCN_OFFSET1_BCN7, 0x6f); /* 0x1bc0 */
+	rt2x00pci_register_write(rt2x00dev, BCN_OFFSET1, reg);
+
+	rt2x00pci_register_write(rt2x00dev, LEGACY_BASIC_RATE, 0x0000013f);
+	rt2x00pci_register_write(rt2x00dev, HT_BASIC_RATE, 0x00008003);
+
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0x00000000);
+
+	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_INTERVAL, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_SYNC, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_TX_TIME_COMPENSATE, 0);
+	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000);
+	rt2x00pci_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606);
+
+	rt2x00pci_register_read(rt2x00dev, TX_LINK_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB_LIFETIME, 32);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_MFB_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_UMFS_ENABLE, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_MRQ_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_RDG_EN, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_TX_CF_ACK_EN, 1);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFB, 0);
+	rt2x00_set_field32(&reg, TX_LINK_CFG_REMOTE_MFS, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_LINK_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, TX_TIMEOUT_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_MPDU_LIFETIME, 9);
+	rt2x00_set_field32(&reg, TX_TIMEOUT_CFG_TX_OP_TIMEOUT, 10);
+	rt2x00pci_register_write(rt2x00dev, TX_TIMEOUT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MAX_LEN_CFG, &reg);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_MPDU, AGGREGATION_SIZE);
+	if (rt2x00_rev(&rt2x00dev->chip) >= RT2880E_VERSION &&
+	    rt2x00_rev(&rt2x00dev->chip) < RT3070_VERSION)
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 2);
+	else
+		rt2x00_set_field32(&reg, MAX_LEN_CFG_MAX_PSDU, 1);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_PSDU, 0);
+	rt2x00_set_field32(&reg, MAX_LEN_CFG_MIN_MPDU, 0);
+	rt2x00pci_register_write(rt2x00dev, MAX_LEN_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, PBF_MAX_PCNT, 0x1f3fbf9f);
+
+	rt2x00pci_register_read(rt2x00dev, AUTO_RSP_CFG, &reg);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_AUTORESPONDER, 1);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MMODE, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_CTS_40_MREF, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_DUAL_CTS_EN, 0);
+	rt2x00_set_field32(&reg, AUTO_RSP_CFG_ACK_CTS_PSM_BIT, 0);
+	rt2x00pci_register_write(rt2x00dev, AUTO_RSP_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_RATE, 8);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_RATE, 0x4004);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_MM40, 0);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_TX_OP_ALLOW_GF40, 0);
+	rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_RATE, 0x4084);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_CTRL, 0);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_PROTECT_NAV, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_CCK, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_OFDM, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_MM40, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF20, 1);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_TX_OP_ALLOW_GF40, 1);
+	rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, TXOP_CTRL_CFG, 0x0000583f);
+	rt2x00pci_register_write(rt2x00dev, TXOP_HLDR_ET, 0x00000002);
+
+	rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 32);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES,
+			   IEEE80211_MAX_RTS_THRESHOLD);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_FBK_EN, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, EXP_ACK_TIME, 0x002400ca);
+	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0x00000003);
+
+	/*
+	 * ASIC will keep garbage value after boot, clear encryption keys.
+	 */
+	for (i = 0; i < 4; i++)
+		rt2x00pci_register_write(rt2x00dev,
+					 SHARED_KEY_MODE_ENTRY(i), 0);
+
+	for (i = 0; i < 256; i++) {
+		u32 wcid[2] = { 0xffffffff, 0x00ffffff };
+		rt2x00pci_register_multiwrite(rt2x00dev, MAC_WCID_ENTRY(i),
+					      wcid, sizeof(wcid));
+
+		rt2x00pci_register_write(rt2x00dev, MAC_WCID_ATTR_ENTRY(i), 1);
+		rt2x00pci_register_write(rt2x00dev, MAC_IVEIV_ENTRY(i), 0);
+	}
+
+	/*
+	 * Clear all beacons
+	 * For the Beacon base registers we only need to clear
+	 * the first byte since that byte contains the VALID and OWNER
+	 * bits which (when set to 0) will invalidate the entire beacon.
+	 */
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE4, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE5, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE6, 0);
+	rt2x00pci_register_write(rt2x00dev, HW_BEACON_BASE7, 0);
+
+	rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS0FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS1FBK, 0);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS2FBK, 1);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS3FBK, 2);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS4FBK, 3);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS5FBK, 4);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS6FBK, 5);
+	rt2x00_set_field32(&reg, HT_FBK_CFG0_HTMCS7FBK, 6);
+	rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG0, reg);
+
+	rt2x00pci_register_read(rt2x00dev, HT_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS8FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS9FBK, 8);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS10FBK, 9);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS11FBK, 10);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS12FBK, 11);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS13FBK, 12);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS14FBK, 13);
+	rt2x00_set_field32(&reg, HT_FBK_CFG1_HTMCS15FBK, 14);
+	rt2x00pci_register_write(rt2x00dev, HT_FBK_CFG1, reg);
+
+	rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG0, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS0FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS1FBK, 8);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS2FBK, 9);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS3FBK, 10);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS4FBK, 11);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS5FBK, 12);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS6FBK, 13);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_OFDMMCS7FBK, 14);
+	rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG0, reg);
+
+	rt2x00pci_register_read(rt2x00dev, LG_FBK_CFG1, &reg);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS0FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS1FBK, 0);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS2FBK, 1);
+	rt2x00_set_field32(&reg, LG_FBK_CFG0_CCKMCS3FBK, 2);
+	rt2x00pci_register_write(rt2x00dev, LG_FBK_CFG1, reg);
+
+	/*
+	 * We must clear the error counters.
+	 * These registers are cleared on read,
+	 * so we may pass a useless variable to store the value.
+	 */
+	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT0, &reg);
+	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT1, &reg);
+	rt2x00pci_register_read(rt2x00dev, RX_STA_CNT2, &reg);
+	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT0, &reg);
+	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT1, &reg);
+	rt2x00pci_register_read(rt2x00dev, TX_STA_CNT2, &reg);
+
+	return 0;
+}
+
+static int rt2800pci_wait_bbp_rf_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, MAC_STATUS_CFG, &reg);
+		if (!rt2x00_get_field32(reg, MAC_STATUS_CFG_BBP_RF_BUSY))
+			return 0;
+
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP/RF register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800pci_wait_bbp_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u8 value;
+
+	/*
+	 * BBP was enabled after firmware was loaded,
+	 * but we need to reactivate it now.
+	 */
+	rt2x00pci_register_write(rt2x00dev, H2M_BBP_AGENT, 0);
+	rt2x00pci_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0);
+	msleep(1);
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2800pci_bbp_read(rt2x00dev, 0, &value);
+		if ((value != 0xff) && (value != 0x00))
+			return 0;
+		udelay(REGISTER_BUSY_DELAY);
+	}
+
+	ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800pci_init_bbp(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u16 eeprom;
+	u8 reg_id;
+	u8 value;
+
+	if (unlikely(rt2800pci_wait_bbp_rf_ready(rt2x00dev) ||
+		     rt2800pci_wait_bbp_ready(rt2x00dev)))
+		return -EACCES;
+
+	rt2800pci_bbp_write(rt2x00dev, 65, 0x2c);
+	rt2800pci_bbp_write(rt2x00dev, 66, 0x38);
+	rt2800pci_bbp_write(rt2x00dev, 69, 0x12);
+	rt2800pci_bbp_write(rt2x00dev, 70, 0x0a);
+	rt2800pci_bbp_write(rt2x00dev, 73, 0x10);
+	rt2800pci_bbp_write(rt2x00dev, 81, 0x37);
+	rt2800pci_bbp_write(rt2x00dev, 82, 0x62);
+	rt2800pci_bbp_write(rt2x00dev, 83, 0x6a);
+	rt2800pci_bbp_write(rt2x00dev, 84, 0x99);
+	rt2800pci_bbp_write(rt2x00dev, 86, 0x00);
+	rt2800pci_bbp_write(rt2x00dev, 91, 0x04);
+	rt2800pci_bbp_write(rt2x00dev, 92, 0x00);
+	rt2800pci_bbp_write(rt2x00dev, 103, 0x00);
+	rt2800pci_bbp_write(rt2x00dev, 105, 0x05);
+
+	if (rt2x00_rev(&rt2x00dev->chip) == RT2860C_VERSION) {
+		rt2800pci_bbp_write(rt2x00dev, 69, 0x16);
+		rt2800pci_bbp_write(rt2x00dev, 73, 0x12);
+	}
+
+	if (rt2x00_rev(&rt2x00dev->chip) > RT2860D_VERSION)
+		rt2800pci_bbp_write(rt2x00dev, 84, 0x19);
+
+	if (rt2x00_rt(&rt2x00dev->chip, RT3052)) {
+		rt2800pci_bbp_write(rt2x00dev, 31, 0x08);
+		rt2800pci_bbp_write(rt2x00dev, 78, 0x0e);
+		rt2800pci_bbp_write(rt2x00dev, 80, 0x08);
+	}
+
+	for (i = 0; i < EEPROM_BBP_SIZE; i++) {
+		rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
+
+		if (eeprom != 0xffff && eeprom != 0x0000) {
+			reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
+			value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
+			rt2800pci_bbp_write(rt2x00dev, reg_id, value);
+		}
+	}
+
+	return 0;
+}
+
+static u8 rt2800pci_init_rx_filter(struct rt2x00_dev *rt2x00dev,
+				   bool bw40, u8 rfcsr24, u8 filter_target)
+{
+	unsigned int i;
+	u8 bbp;
+	u8 rfcsr;
+	u8 passband;
+	u8 stopband;
+	u8 overtuned = 0;
+
+	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+
+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * bw40);
+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 1);
+	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * Set power & frequency of passband test tone
+	 */
+	rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+	for (i = 0; i < 100; i++) {
+		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800pci_bbp_read(rt2x00dev, 55, &passband);
+		if (passband)
+			break;
+	}
+
+	/*
+	 * Set power & frequency of stopband test tone
+	 */
+	rt2800pci_bbp_write(rt2x00dev, 24, 0x06);
+
+	for (i = 0; i < 100; i++) {
+		rt2800pci_bbp_write(rt2x00dev, 25, 0x90);
+		msleep(1);
+
+		rt2800pci_bbp_read(rt2x00dev, 55, &stopband);
+
+		if ((passband - stopband) <= filter_target) {
+			rfcsr24++;
+			overtuned += ((passband - stopband) == filter_target);
+		} else
+			break;
+
+		rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	}
+
+	rfcsr24 -= !!overtuned;
+
+	rt2800pci_rfcsr_write(rt2x00dev, 24, rfcsr24);
+	return rfcsr24;
+}
+
+static int rt2800pci_init_rfcsr(struct rt2x00_dev *rt2x00dev)
+{
+	u8 rfcsr;
+	u8 bbp;
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3022))
+		return 0;
+
+	/*
+	 * Init RF calibration.
+	 */
+	rt2800pci_rfcsr_read(rt2x00dev, 30, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 1);
+	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+	msleep(1);
+	rt2x00_set_field8(&rfcsr, RFCSR30_RF_CALIBRATION, 0);
+	rt2800pci_rfcsr_write(rt2x00dev, 30, rfcsr);
+
+	rt2800pci_rfcsr_write(rt2x00dev, 0, 0x50);
+	rt2800pci_rfcsr_write(rt2x00dev, 1, 0x01);
+	rt2800pci_rfcsr_write(rt2x00dev, 2, 0xf7);
+	rt2800pci_rfcsr_write(rt2x00dev, 3, 0x75);
+	rt2800pci_rfcsr_write(rt2x00dev, 4, 0x40);
+	rt2800pci_rfcsr_write(rt2x00dev, 5, 0x03);
+	rt2800pci_rfcsr_write(rt2x00dev, 6, 0x02);
+	rt2800pci_rfcsr_write(rt2x00dev, 7, 0x50);
+	rt2800pci_rfcsr_write(rt2x00dev, 8, 0x39);
+	rt2800pci_rfcsr_write(rt2x00dev, 9, 0x0f);
+	rt2800pci_rfcsr_write(rt2x00dev, 10, 0x60);
+	rt2800pci_rfcsr_write(rt2x00dev, 11, 0x21);
+	rt2800pci_rfcsr_write(rt2x00dev, 12, 0x75);
+	rt2800pci_rfcsr_write(rt2x00dev, 13, 0x75);
+	rt2800pci_rfcsr_write(rt2x00dev, 14, 0x90);
+	rt2800pci_rfcsr_write(rt2x00dev, 15, 0x58);
+	rt2800pci_rfcsr_write(rt2x00dev, 16, 0xb3);
+	rt2800pci_rfcsr_write(rt2x00dev, 17, 0x92);
+	rt2800pci_rfcsr_write(rt2x00dev, 18, 0x2c);
+	rt2800pci_rfcsr_write(rt2x00dev, 19, 0x02);
+	rt2800pci_rfcsr_write(rt2x00dev, 20, 0xba);
+	rt2800pci_rfcsr_write(rt2x00dev, 21, 0xdb);
+	rt2800pci_rfcsr_write(rt2x00dev, 22, 0x00);
+	rt2800pci_rfcsr_write(rt2x00dev, 23, 0x31);
+	rt2800pci_rfcsr_write(rt2x00dev, 24, 0x08);
+	rt2800pci_rfcsr_write(rt2x00dev, 25, 0x01);
+	rt2800pci_rfcsr_write(rt2x00dev, 26, 0x25);
+	rt2800pci_rfcsr_write(rt2x00dev, 27, 0x23);
+	rt2800pci_rfcsr_write(rt2x00dev, 28, 0x13);
+	rt2800pci_rfcsr_write(rt2x00dev, 29, 0x83);
+
+	/*
+	 * Set RX Filter calibration for 20MHz and 40MHz
+	 */
+	rt2x00dev->calibration[0] =
+	    rt2800pci_init_rx_filter(rt2x00dev, false, 0x07, 0x16);
+	rt2x00dev->calibration[1] =
+	    rt2800pci_init_rx_filter(rt2x00dev, true, 0x27, 0x19);
+
+	/*
+	 * Set back to initial state
+	 */
+	rt2800pci_bbp_write(rt2x00dev, 24, 0);
+
+	rt2800pci_rfcsr_read(rt2x00dev, 22, &rfcsr);
+	rt2x00_set_field8(&rfcsr, RFCSR22_BASEBAND_LOOPBACK, 0);
+	rt2800pci_rfcsr_write(rt2x00dev, 22, rfcsr);
+
+	/*
+	 * set BBP back to BW20
+	 */
+	rt2800pci_bbp_read(rt2x00dev, 4, &bbp);
+	rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 0);
+	rt2800pci_bbp_write(rt2x00dev, 4, bbp);
+
+	return 0;
+}
+
+/*
+ * Device state switch handlers.
+ */
+static void rt2800pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
+				enum dev_state state)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX,
+			   (state == STATE_RADIO_RX_ON) ||
+			   (state == STATE_RADIO_RX_ON_LINK));
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+}
+
+static void rt2800pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
+				 enum dev_state state)
+{
+	int mask = (state == STATE_RADIO_IRQ_ON);
+	u32 reg;
+
+	/*
+	 * When interrupts are being enabled, the interrupt registers
+	 * should clear the register to assure a clean state.
+	 */
+	if (state == STATE_RADIO_IRQ_ON) {
+		rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+		rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+	}
+
+	rt2x00pci_register_read(rt2x00dev, INT_MASK_CSR, &reg);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RXDELAYINT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TXDELAYINT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC0_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC1_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC2_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AC3_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_HCCA_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_MGMT_DMA_DONE, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_MCU_COMMAND, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RXTX_COHERENT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TBTT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_PRE_TBTT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TX_FIFO_STATUS, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_AUTO_WAKEUP, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_GPTIMER, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_RX_COHERENT, mask);
+	rt2x00_set_field32(&reg, INT_MASK_CSR_TX_COHERENT, mask);
+	rt2x00pci_register_write(rt2x00dev, INT_MASK_CSR, reg);
+}
+
+static int rt2800pci_wait_wpdma_ready(struct rt2x00_dev *rt2x00dev)
+{
+	unsigned int i;
+	u32 reg;
+
+	for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
+		rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+		if (!rt2x00_get_field32(reg, WPDMA_GLO_CFG_TX_DMA_BUSY) &&
+		    !rt2x00_get_field32(reg, WPDMA_GLO_CFG_RX_DMA_BUSY))
+			return 0;
+
+		msleep(1);
+	}
+
+	ERROR(rt2x00dev, "WPDMA TX/RX busy, aborting.\n");
+	return -EACCES;
+}
+
+static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 word;
+
+	/*
+	 * Initialize all registers.
+	 */
+	if (unlikely(rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800pci_init_queues(rt2x00dev) ||
+		     rt2800pci_init_registers(rt2x00dev) ||
+		     rt2800pci_wait_wpdma_ready(rt2x00dev) ||
+		     rt2800pci_init_bbp(rt2x00dev) ||
+		     rt2800pci_init_rfcsr(rt2x00dev)))
+		return -EIO;
+
+	/*
+	 * Send signal to firmware during boot time.
+	 */
+	rt2800pci_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0xff, 0, 0);
+
+	/*
+	 * Enable RX.
+	 */
+	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 0);
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 1);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_WP_DMA_BURST_SIZE, 2);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MAC_SYS_CTRL, &reg);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_TX, 1);
+	rt2x00_set_field32(&reg, MAC_SYS_CTRL_ENABLE_RX, 1);
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, reg);
+
+	/*
+	 * Initialize LED control
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED1, &word);
+	rt2800pci_mcu_request(rt2x00dev, MCU_LED_1, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED2, &word);
+	rt2800pci_mcu_request(rt2x00dev, MCU_LED_2, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LED3, &word);
+	rt2800pci_mcu_request(rt2x00dev, MCU_LED_3, 0xff,
+			      word & 0xff, (word >> 8) & 0xff);
+
+	return 0;
+}
+
+static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, WPDMA_GLO_CFG, &reg);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_TX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_ENABLE_RX_DMA, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_RX_DMA_BUSY, 0);
+	rt2x00_set_field32(&reg, WPDMA_GLO_CFG_TX_WRITEBACK_DONE, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_GLO_CFG, reg);
+
+	rt2x00pci_register_write(rt2x00dev, MAC_SYS_CTRL, 0);
+	rt2x00pci_register_write(rt2x00dev, PWR_PIN_CFG, 0);
+	rt2x00pci_register_write(rt2x00dev, TX_PIN_CFG, 0);
+
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001280);
+
+	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX4, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX5, 1);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DRX_IDX0, 1);
+	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e1f);
+	rt2x00pci_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000e00);
+
+	/* Wait for DMA, ignore error */
+	rt2800pci_wait_wpdma_ready(rt2x00dev);
+}
+
+static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev,
+			       enum dev_state state)
+{
+	/*
+	 * Always put the device to sleep (even when we intend to wakeup!)
+	 * if the device is booting and wasn't asleep it will return
+	 * failure when attempting to wakeup.
+	 */
+	rt2800pci_mcu_request(rt2x00dev, MCU_SLEEP, 0xff, 0, 2);
+
+	if (state == STATE_AWAKE) {
+		rt2800pci_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKUP, 0, 0);
+		rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKUP);
+	}
+
+	return 0;
+}
+
+static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev,
+				      enum dev_state state)
+{
+	int retval = 0;
+
+	switch (state) {
+	case STATE_RADIO_ON:
+		/*
+		 * Before the radio can be enabled, the device first has
+		 * to be woken up. After that it needs a bit of time
+		 * to be fully awake and then the radio can be enabled.
+		 */
+		rt2800pci_set_state(rt2x00dev, STATE_AWAKE);
+		msleep(1);
+		retval = rt2800pci_enable_radio(rt2x00dev);
+		break;
+	case STATE_RADIO_OFF:
+		/*
+		 * After the radio has been disabled, the device should
+		 * be put to sleep for powersaving.
+		 */
+		rt2800pci_disable_radio(rt2x00dev);
+		rt2800pci_set_state(rt2x00dev, STATE_SLEEP);
+		break;
+	case STATE_RADIO_RX_ON:
+	case STATE_RADIO_RX_ON_LINK:
+	case STATE_RADIO_RX_OFF:
+	case STATE_RADIO_RX_OFF_LINK:
+		rt2800pci_toggle_rx(rt2x00dev, state);
+		break;
+	case STATE_RADIO_IRQ_ON:
+	case STATE_RADIO_IRQ_OFF:
+		rt2800pci_toggle_irq(rt2x00dev, state);
+		break;
+	case STATE_DEEP_SLEEP:
+	case STATE_SLEEP:
+	case STATE_STANDBY:
+	case STATE_AWAKE:
+		retval = rt2800pci_set_state(rt2x00dev, state);
+		break;
+	default:
+		retval = -ENOTSUPP;
+		break;
+	}
+
+	if (unlikely(retval))
+		ERROR(rt2x00dev, "Device failed to enter state %d (%d).\n",
+		      state, retval);
+
+	return retval;
+}
+
+/*
+ * TX descriptor initialization
+ */
+static void rt2800pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
+				    struct sk_buff *skb,
+				    struct txentry_desc *txdesc)
+{
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
+	__le32 *txd = skbdesc->desc;
+	__le32 *txwi = (__le32 *)(skb->data - rt2x00dev->hw->extra_tx_headroom);
+	u32 word;
+
+	/*
+	 * Initialize TX Info descriptor
+	 */
+	rt2x00_desc_read(txwi, 0, &word);
+	rt2x00_set_field32(&word, TXWI_W0_FRAG,
+			   test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MIMO_PS, 0);
+	rt2x00_set_field32(&word, TXWI_W0_CF_ACK, 0);
+	rt2x00_set_field32(&word, TXWI_W0_TS,
+			   test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_AMPDU,
+			   test_bit(ENTRY_TXD_HT_AMPDU, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_MPDU_DENSITY, txdesc->mpdu_density);
+	rt2x00_set_field32(&word, TXWI_W0_TX_OP, txdesc->ifs);
+	rt2x00_set_field32(&word, TXWI_W0_MCS, txdesc->mcs);
+	rt2x00_set_field32(&word, TXWI_W0_BW,
+			   test_bit(ENTRY_TXD_HT_BW_40, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_SHORT_GI,
+			   test_bit(ENTRY_TXD_HT_SHORT_GI, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W0_STBC, txdesc->stbc);
+	rt2x00_set_field32(&word, TXWI_W0_PHYMODE, txdesc->rate_mode);
+	rt2x00_desc_write(txwi, 0, word);
+
+	rt2x00_desc_read(txwi, 1, &word);
+	rt2x00_set_field32(&word, TXWI_W1_ACK,
+			   test_bit(ENTRY_TXD_ACK, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_NSEQ,
+			   test_bit(ENTRY_TXD_GENERATE_SEQ, &txdesc->flags));
+	rt2x00_set_field32(&word, TXWI_W1_BW_WIN_SIZE, txdesc->ba_size);
+	rt2x00_set_field32(&word, TXWI_W1_WIRELESS_CLI_ID,
+			   test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ?
+			       (skbdesc->entry->entry_idx + 1) : 0xff);
+	rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT,
+			   skb->len - txdesc->l2pad);
+	rt2x00_set_field32(&word, TXWI_W1_PACKETID,
+			   skbdesc->entry->queue->qid + 1);
+	rt2x00_desc_write(txwi, 1, word);
+
+	/*
+	 * Always write 0 to IV/EIV fields, hardware will insert the IV
+	 * from the IVEIV register when ENTRY_TXD_ENCRYPT_IV is set to 0.
+	 * When ENTRY_TXD_ENCRYPT_IV is set to 1 it will use the IV data
+	 * from the descriptor. The TXWI_W1_WIRELESS_CLI_ID indicates which
+	 * crypto entry in the registers should be used to encrypt the frame.
+	 */
+	_rt2x00_desc_write(txwi, 2, 0 /* skbdesc->iv[0] */);
+	_rt2x00_desc_write(txwi, 3, 0 /* skbdesc->iv[1] */);
+
+	/*
+	 * The buffers pointed by SD_PTR0/SD_LEN0 and SD_PTR1/SD_LEN1
+	 * must contains a TXWI structure + 802.11 header + padding + 802.11
+	 * data. We choose to have SD_PTR0/SD_LEN0 only contains TXWI and
+	 * SD_PTR1/SD_LEN1 contains 802.11 header + padding + 802.11
+	 * data. It means that LAST_SEC0 is always 0.
+	 */
+
+	/*
+	 * Initialize TX descriptor
+	 */
+	rt2x00_desc_read(txd, 0, &word);
+	rt2x00_set_field32(&word, TXD_W0_SD_PTR0, skbdesc->skb_dma);
+	rt2x00_desc_write(txd, 0, word);
+
+	rt2x00_desc_read(txd, 1, &word);
+	rt2x00_set_field32(&word, TXD_W1_SD_LEN1, skb->len);
+	rt2x00_set_field32(&word, TXD_W1_LAST_SEC1,
+			   !test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W1_BURST,
+			   test_bit(ENTRY_TXD_BURST, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W1_SD_LEN0,
+			   rt2x00dev->hw->extra_tx_headroom);
+	rt2x00_set_field32(&word, TXD_W1_LAST_SEC0, 0);
+	rt2x00_set_field32(&word, TXD_W1_DMA_DONE, 0);
+	rt2x00_desc_write(txd, 1, word);
+
+	rt2x00_desc_read(txd, 2, &word);
+	rt2x00_set_field32(&word, TXD_W2_SD_PTR1,
+			   skbdesc->skb_dma + rt2x00dev->hw->extra_tx_headroom);
+	rt2x00_desc_write(txd, 2, word);
+
+	rt2x00_desc_read(txd, 3, &word);
+	rt2x00_set_field32(&word, TXD_W3_WIV,
+			   !test_bit(ENTRY_TXD_ENCRYPT_IV, &txdesc->flags));
+	rt2x00_set_field32(&word, TXD_W3_QSEL, 2);
+	rt2x00_desc_write(txd, 3, word);
+}
+
+/*
+ * TX data initialization
+ */
+static void rt2800pci_write_beacon(struct queue_entry *entry)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	unsigned int beacon_base;
+	u32 reg;
+
+	/*
+	 * Disable beaconing while we are reloading the beacon data,
+	 * otherwise we might be sending out invalid data.
+	 */
+	rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+	rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 0);
+	rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+
+	/*
+	 * Write entire beacon with descriptor to register.
+	 */
+	beacon_base = HW_BEACON_OFFSET(entry->entry_idx);
+	rt2x00pci_register_multiwrite(rt2x00dev,
+				      beacon_base,
+				      skbdesc->desc, skbdesc->desc_len);
+	rt2x00pci_register_multiwrite(rt2x00dev,
+				      beacon_base + skbdesc->desc_len,
+				      entry->skb->data, entry->skb->len);
+
+	/*
+	 * Clean up beacon skb.
+	 */
+	dev_kfree_skb_any(entry->skb);
+	entry->skb = NULL;
+}
+
+static void rt2800pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid queue_idx)
+{
+	struct data_queue *queue;
+	unsigned int idx, qidx = 0;
+	u32 reg;
+
+	if (queue_idx == QID_BEACON) {
+		rt2x00pci_register_read(rt2x00dev, BCN_TIME_CFG, &reg);
+		if (!rt2x00_get_field32(reg, BCN_TIME_CFG_BEACON_GEN)) {
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_TSF_TICKING, 1);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_TBTT_ENABLE, 1);
+			rt2x00_set_field32(&reg, BCN_TIME_CFG_BEACON_GEN, 1);
+			rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, reg);
+		}
+		return;
+	}
+
+	if (queue_idx > QID_HCCA && queue_idx != QID_MGMT)
+		return;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+	idx = queue->index[Q_INDEX];
+
+	if (queue_idx == QID_MGMT)
+		qidx = 5;
+	else
+		qidx = queue_idx;
+
+	rt2x00pci_register_write(rt2x00dev, TX_CTX_IDX(qidx), idx);
+}
+
+static void rt2800pci_kill_tx_queue(struct rt2x00_dev *rt2x00dev,
+				    const enum data_queue_qid qid)
+{
+	u32 reg;
+
+	if (qid == QID_BEACON) {
+		rt2x00pci_register_write(rt2x00dev, BCN_TIME_CFG, 0);
+		return;
+	}
+
+	rt2x00pci_register_read(rt2x00dev, WPDMA_RST_IDX, &reg);
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX0, (qid == QID_AC_BE));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX1, (qid == QID_AC_BK));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX2, (qid == QID_AC_VI));
+	rt2x00_set_field32(&reg, WPDMA_RST_IDX_DTX_IDX3, (qid == QID_AC_VO));
+	rt2x00pci_register_write(rt2x00dev, WPDMA_RST_IDX, reg);
+}
+
+/*
+ * RX control handlers
+ */
+static void rt2800pci_fill_rxdone(struct queue_entry *entry,
+				  struct rxdone_entry_desc *rxdesc)
+{
+	struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
+	struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
+	struct queue_entry_priv_pci *entry_priv = entry->priv_data;
+	__le32 *rxd = entry_priv->desc;
+	__le32 *rxwi = (__le32 *)entry->skb->data;
+	u32 rxd3;
+	u32 rxwi0;
+	u32 rxwi1;
+	u32 rxwi2;
+	u32 rxwi3;
+
+	rt2x00_desc_read(rxd, 3, &rxd3);
+	rt2x00_desc_read(rxwi, 0, &rxwi0);
+	rt2x00_desc_read(rxwi, 1, &rxwi1);
+	rt2x00_desc_read(rxwi, 2, &rxwi2);
+	rt2x00_desc_read(rxwi, 3, &rxwi3);
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_CRC_ERROR))
+		rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
+
+	if (test_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags)) {
+		/*
+		 * Unfortunately we don't know the cipher type used during
+		 * decryption. This prevents us from correct providing
+		 * correct statistics through debugfs.
+		 */
+		rxdesc->cipher = rt2x00_get_field32(rxwi0, RXWI_W0_UDF);
+		rxdesc->cipher_status =
+		    rt2x00_get_field32(rxd3, RXD_W3_CIPHER_ERROR);
+	}
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_DECRYPTED)) {
+		/*
+		 * Hardware has stripped IV/EIV data from 802.11 frame during
+		 * decryption. Unfortunately the descriptor doesn't contain
+		 * any fields with the EIV/IV data either, so they can't
+		 * be restored by rt2x00lib.
+		 */
+		rxdesc->flags |= RX_FLAG_IV_STRIPPED;
+
+		if (rxdesc->cipher_status == RX_CRYPTO_SUCCESS)
+			rxdesc->flags |= RX_FLAG_DECRYPTED;
+		else if (rxdesc->cipher_status == RX_CRYPTO_FAIL_MIC)
+			rxdesc->flags |= RX_FLAG_MMIC_ERROR;
+	}
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_MY_BSS))
+		rxdesc->dev_flags |= RXDONE_MY_BSS;
+
+	if (rt2x00_get_field32(rxd3, RXD_W3_L2PAD)) {
+		rxdesc->dev_flags |= RXDONE_L2PAD;
+		skbdesc->flags |= SKBDESC_L2_PADDED;
+	}
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_SHORT_GI))
+		rxdesc->flags |= RX_FLAG_SHORT_GI;
+
+	if (rt2x00_get_field32(rxwi1, RXWI_W1_BW))
+		rxdesc->flags |= RX_FLAG_40MHZ;
+
+	/*
+	 * Detect RX rate, always use MCS as signal type.
+	 */
+	rxdesc->dev_flags |= RXDONE_SIGNAL_MCS;
+	rxdesc->rate_mode = rt2x00_get_field32(rxwi1, RXWI_W1_PHYMODE);
+	rxdesc->signal = rt2x00_get_field32(rxwi1, RXWI_W1_MCS);
+
+	/*
+	 * Mask of 0x8 bit to remove the short preamble flag.
+	 */
+	if (rxdesc->rate_mode == RATE_MODE_CCK)
+		rxdesc->signal &= ~0x8;
+
+	rxdesc->rssi =
+	    (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) +
+	     rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2;
+
+	rxdesc->noise =
+	    (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) +
+	     rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2;
+
+	rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT);
+
+	/*
+	 * Set RX IDX in register to inform hardware that we have handled
+	 * this entry and it is available for reuse again.
+	 */
+	rt2x00pci_register_write(rt2x00dev, RX_CRX_IDX, entry->entry_idx);
+
+	/*
+	 * Remove TXWI descriptor from start of buffer.
+	 */
+	skb_pull(entry->skb, RXWI_DESC_SIZE);
+	skb_trim(entry->skb, rxdesc->size);
+}
+
+/*
+ * Interrupt functions.
+ */
+static void rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
+{
+	struct data_queue *queue;
+	struct queue_entry *entry;
+	struct queue_entry *entry_done;
+	struct queue_entry_priv_pci *entry_priv;
+	struct txdone_entry_desc txdesc;
+	u32 word;
+	u32 reg;
+	u32 old_reg;
+	unsigned int type;
+	unsigned int index;
+	u16 mcs, real_mcs;
+
+	/*
+	 * During each loop we will compare the freshly read
+	 * TX_STA_FIFO register value with the value read from
+	 * the previous loop. If the 2 values are equal then
+	 * we should stop processing because the chance it
+	 * quite big that the device has been unplugged and
+	 * we risk going into an endless loop.
+	 */
+	old_reg = 0;
+
+	while (1) {
+		rt2x00pci_register_read(rt2x00dev, TX_STA_FIFO, &reg);
+		if (!rt2x00_get_field32(reg, TX_STA_FIFO_VALID))
+			break;
+
+		if (old_reg == reg)
+			break;
+		old_reg = reg;
+
+		/*
+		 * Skip this entry when it contains an invalid
+		 * queue identication number.
+		 */
+		type = rt2x00_get_field32(reg, TX_STA_FIFO_PID_TYPE) - 1;
+		if (type >= QID_RX)
+			continue;
+
+		queue = rt2x00queue_get_queue(rt2x00dev, type);
+		if (unlikely(!queue))
+			continue;
+
+		/*
+		 * Skip this entry when it contains an invalid
+		 * index number.
+		 */
+		index = rt2x00_get_field32(reg, TX_STA_FIFO_WCID) - 1;
+		if (unlikely(index >= queue->limit))
+			continue;
+
+		entry = &queue->entries[index];
+		entry_priv = entry->priv_data;
+		rt2x00_desc_read((__le32 *)entry->skb->data, 0, &word);
+
+		entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		while (entry != entry_done) {
+			/*
+			 * Catch up.
+			 * Just report any entries we missed as failed.
+			 */
+			WARNING(rt2x00dev,
+				"TX status report missed for entry %d\n",
+				entry_done->entry_idx);
+
+			txdesc.flags = 0;
+			__set_bit(TXDONE_UNKNOWN, &txdesc.flags);
+			txdesc.retry = 0;
+
+			rt2x00lib_txdone(entry_done, &txdesc);
+			entry_done = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
+		}
+
+		/*
+		 * Obtain the status about this packet.
+		 */
+		txdesc.flags = 0;
+		if (rt2x00_get_field32(reg, TX_STA_FIFO_TX_SUCCESS))
+			__set_bit(TXDONE_SUCCESS, &txdesc.flags);
+		else
+			__set_bit(TXDONE_FAILURE, &txdesc.flags);
+
+		/*
+		 * Ralink has a retry mechanism using a global fallback
+		 * table. We setup this fallback table to try immediate
+		 * lower rate for all rates. In the TX_STA_FIFO,
+		 * the MCS field contains the MCS used for the successfull
+		 * transmission. If the first transmission succeed,
+		 * we have mcs == tx_mcs. On the second transmission,
+		 * we have mcs = tx_mcs - 1. So the number of
+		 * retry is (tx_mcs - mcs).
+		 */
+		mcs = rt2x00_get_field32(word, TXWI_W0_MCS);
+		real_mcs = rt2x00_get_field32(reg, TX_STA_FIFO_MCS);
+		__set_bit(TXDONE_FALLBACK, &txdesc.flags);
+		txdesc.retry = mcs - min(mcs, real_mcs);
+
+		rt2x00lib_txdone(entry, &txdesc);
+	}
+}
+
+static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
+{
+	struct rt2x00_dev *rt2x00dev = dev_instance;
+	u32 reg;
+
+	/* Read status and ACK all interrupts */
+	rt2x00pci_register_read(rt2x00dev, INT_SOURCE_CSR, &reg);
+	rt2x00pci_register_write(rt2x00dev, INT_SOURCE_CSR, reg);
+
+	if (!reg)
+		return IRQ_NONE;
+
+	if (!test_bit(DEVICE_STATE_ENABLED_RADIO, &rt2x00dev->flags))
+		return IRQ_HANDLED;
+
+	/*
+	 * 1 - Rx ring done interrupt.
+	 */
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_RX_DONE))
+		rt2x00pci_rxdone(rt2x00dev);
+
+	if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS))
+		rt2800pci_txdone(rt2x00dev);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Device probe functions.
+ */
+static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u16 word;
+	u8 *mac;
+	u8 default_lna_gain;
+
+	/*
+	 * Read EEPROM into buffer
+	 */
+	switch(rt2x00dev->chip.rt) {
+	case RT2880:
+	case RT3052:
+		rt2800pci_read_eeprom_soc(rt2x00dev);
+		break;
+	case RT3090:
+		rt2800pci_read_eeprom_efuse(rt2x00dev);
+		break;
+	default:
+		rt2800pci_read_eeprom_pci(rt2x00dev);
+		break;
+	}
+
+	/*
+	 * Start validation of the data that has been read.
+	 */
+	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
+	if (!is_valid_ether_addr(mac)) {
+		random_ether_addr(mac);
+		EEPROM(rt2x00dev, "MAC: %pM\n", mac);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_TXPATH, 1);
+		rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2820);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+		EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
+	} else if (rt2x00_rev(&rt2x00dev->chip) < RT2883_VERSION) {
+		/*
+		 * There is a max of 2 RX streams for RT2860 series
+		 */
+		if (rt2x00_get_field16(word, EEPROM_ANTENNA_RXPATH) > 2)
+			rt2x00_set_field16(&word, EEPROM_ANTENNA_RXPATH, 2);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
+	if (word == 0xffff) {
+		rt2x00_set_field16(&word, EEPROM_NIC_HW_RADIO, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_DYNAMIC_TX_AGC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_SB_A, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_WPS_PBC, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_BG, 0);
+		rt2x00_set_field16(&word, EEPROM_NIC_BW40M_A, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
+		EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
+	}
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
+	if ((word & 0x00ff) == 0x00ff) {
+		rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_MODE,
+				   LED_MODE_TXRX_ACTIVITY);
+		rt2x00_set_field16(&word, EEPROM_FREQ_LED_POLARITY, 0);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED1, 0x5555);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED2, 0x2221);
+		rt2x00_eeprom_write(rt2x00dev, EEPROM_LED3, 0xa9f8);
+		EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
+	}
+
+	/*
+	 * During the LNA validation we are going to use
+	 * lna0 as correct value. Note that EEPROM_LNA
+	 * is never validated.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_LNA, &word);
+	default_lna_gain = rt2x00_get_field16(word, EEPROM_LNA_A0);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_BG2, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET0)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET0, 0);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A_OFFSET1)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A_OFFSET1, 0);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A, word);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word);
+	if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0);
+	if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 ||
+	    rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff)
+		rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2,
+				   default_lna_gain);
+	rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word);
+
+	return 0;
+}
+
+static int rt2800pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	u32 reg;
+	u16 value;
+	u16 eeprom;
+
+	/*
+	 * Read EEPROM word for configuration.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Identify RF chipset.
+	 */
+	value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
+	rt2x00pci_register_read(rt2x00dev, MAC_CSR0, &reg);
+	rt2x00_set_chip_rf(rt2x00dev, value, reg);
+
+	if (!rt2x00_rf(&rt2x00dev->chip, RF2820) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2850) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2720) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2750) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF2020) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3021) &&
+	    !rt2x00_rf(&rt2x00dev->chip, RF3022)) {
+		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * Identify default antenna configuration.
+	 */
+	rt2x00dev->default_ant.tx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH);
+	rt2x00dev->default_ant.rx =
+	    rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH);
+
+	/*
+	 * Read frequency offset and RF programming sequence.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
+	rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
+
+	/*
+	 * Read external LNA informations.
+	 */
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
+
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_A))
+		__set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA_BG))
+		__set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
+
+	/*
+	 * Detect if this device has an hardware controlled radio.
+	 */
+	if (rt2x00_get_field16(eeprom, EEPROM_NIC_HW_RADIO))
+		__set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
+
+	/*
+	 * Store led settings, for correct led behaviour.
+	 */
+#ifdef CONFIG_RT2X00_LIB_LEDS
+	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_radio, LED_TYPE_RADIO);
+	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC);
+	rt2800pci_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY);
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &rt2x00dev->led_mcu_reg);
+#endif /* CONFIG_RT2X00_LIB_LEDS */
+
+	return 0;
+}
+
+/*
+ * RF value list for rt2860
+ * Supports: 2.4 GHz (all) & 5.2 GHz (RF2850 & RF2750)
+ */
+static const struct rf_channel rf_vals[] = {
+	{ 1,  0x18402ecc, 0x184c0786, 0x1816b455, 0x1800510b },
+	{ 2,  0x18402ecc, 0x184c0786, 0x18168a55, 0x1800519f },
+	{ 3,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800518b },
+	{ 4,  0x18402ecc, 0x184c078a, 0x18168a55, 0x1800519f },
+	{ 5,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800518b },
+	{ 6,  0x18402ecc, 0x184c078e, 0x18168a55, 0x1800519f },
+	{ 7,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800518b },
+	{ 8,  0x18402ecc, 0x184c0792, 0x18168a55, 0x1800519f },
+	{ 9,  0x18402ecc, 0x184c0796, 0x18168a55, 0x1800518b },
+	{ 10, 0x18402ecc, 0x184c0796, 0x18168a55, 0x1800519f },
+	{ 11, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800518b },
+	{ 12, 0x18402ecc, 0x184c079a, 0x18168a55, 0x1800519f },
+	{ 13, 0x18402ecc, 0x184c079e, 0x18168a55, 0x1800518b },
+	{ 14, 0x18402ecc, 0x184c07a2, 0x18168a55, 0x18005193 },
+
+	/* 802.11 UNI / HyperLan 2 */
+	{ 36, 0x18402ecc, 0x184c099a, 0x18158a55, 0x180ed1a3 },
+	{ 38, 0x18402ecc, 0x184c099e, 0x18158a55, 0x180ed193 },
+	{ 40, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed183 },
+	{ 44, 0x18402ec8, 0x184c0682, 0x18158a55, 0x180ed1a3 },
+	{ 46, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed18b },
+	{ 48, 0x18402ec8, 0x184c0686, 0x18158a55, 0x180ed19b },
+	{ 52, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed193 },
+	{ 54, 0x18402ec8, 0x184c068a, 0x18158a55, 0x180ed1a3 },
+	{ 56, 0x18402ec8, 0x184c068e, 0x18158a55, 0x180ed18b },
+	{ 60, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed183 },
+	{ 62, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed193 },
+	{ 64, 0x18402ec8, 0x184c0692, 0x18158a55, 0x180ed1a3 },
+
+	/* 802.11 HyperLan 2 */
+	{ 100, 0x18402ec8, 0x184c06b2, 0x18178a55, 0x180ed783 },
+	{ 102, 0x18402ec8, 0x184c06b2, 0x18578a55, 0x180ed793 },
+	{ 104, 0x18402ec8, 0x185c06b2, 0x18578a55, 0x180ed1a3 },
+	{ 108, 0x18402ecc, 0x185c0a32, 0x18578a55, 0x180ed193 },
+	{ 110, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed183 },
+	{ 112, 0x18402ecc, 0x184c0a36, 0x18178a55, 0x180ed19b },
+	{ 116, 0x18402ecc, 0x184c0a3a, 0x18178a55, 0x180ed1a3 },
+	{ 118, 0x18402ecc, 0x184c0a3e, 0x18178a55, 0x180ed193 },
+	{ 120, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed183 },
+	{ 124, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed193 },
+	{ 126, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed15b },
+	{ 128, 0x18402ec4, 0x184c0382, 0x18178a55, 0x180ed1a3 },
+	{ 132, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed18b },
+	{ 134, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed193 },
+	{ 136, 0x18402ec4, 0x184c0386, 0x18178a55, 0x180ed19b },
+	{ 140, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed183 },
+
+	/* 802.11 UNII */
+	{ 149, 0x18402ec4, 0x184c038a, 0x18178a55, 0x180ed1a7 },
+	{ 151, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed187 },
+	{ 153, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed18f },
+	{ 157, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed19f },
+	{ 159, 0x18402ec4, 0x184c038e, 0x18178a55, 0x180ed1a7 },
+	{ 161, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed187 },
+	{ 165, 0x18402ec4, 0x184c0392, 0x18178a55, 0x180ed197 },
+
+	/* 802.11 Japan */
+	{ 184, 0x15002ccc, 0x1500491e, 0x1509be55, 0x150c0a0b },
+	{ 188, 0x15002ccc, 0x15004922, 0x1509be55, 0x150c0a13 },
+	{ 192, 0x15002ccc, 0x15004926, 0x1509be55, 0x150c0a1b },
+	{ 196, 0x15002ccc, 0x1500492a, 0x1509be55, 0x150c0a23 },
+	{ 208, 0x15002ccc, 0x1500493a, 0x1509be55, 0x150c0a13 },
+	{ 212, 0x15002ccc, 0x1500493e, 0x1509be55, 0x150c0a1b },
+	{ 216, 0x15002ccc, 0x15004982, 0x1509be55, 0x150c0a23 },
+};
+
+static int rt2800pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+{
+	struct hw_mode_spec *spec = &rt2x00dev->spec;
+	struct channel_info *info;
+	char *tx_power1;
+	char *tx_power2;
+	unsigned int i;
+	u16 eeprom;
+
+	/*
+	 * Initialize all hw fields.
+	 */
+	rt2x00dev->hw->flags =
+	    IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING |
+	    IEEE80211_HW_SIGNAL_DBM |
+	    IEEE80211_HW_SUPPORTS_PS |
+	    IEEE80211_HW_PS_NULLFUNC_STACK;
+	rt2x00dev->hw->extra_tx_headroom = TXWI_DESC_SIZE;
+
+	SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev);
+	SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
+				rt2x00_eeprom_addr(rt2x00dev,
+						   EEPROM_MAC_ADDR_0));
+
+	rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
+
+	/*
+	 * Initialize hw_mode information.
+	 */
+	spec->supported_bands = SUPPORT_BAND_2GHZ;
+	spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
+
+	if (rt2x00_rf(&rt2x00dev->chip, RF2820) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF2720) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF3020) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF3021) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF3022) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF2020) ||
+	    rt2x00_rf(&rt2x00dev->chip, RF3052)) {
+		spec->num_channels = 14;
+		spec->channels = rf_vals;
+	} else if (rt2x00_rf(&rt2x00dev->chip, RF2850) ||
+		   rt2x00_rf(&rt2x00dev->chip, RF2750)) {
+		spec->supported_bands |= SUPPORT_BAND_5GHZ;
+		spec->num_channels = ARRAY_SIZE(rf_vals);
+		spec->channels = rf_vals;
+	}
+
+	/*
+	 * Initialize HT information.
+	 */
+	spec->ht.ht_supported = true;
+	spec->ht.cap =
+	    IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
+	    IEEE80211_HT_CAP_GRN_FLD |
+	    IEEE80211_HT_CAP_SGI_20 |
+	    IEEE80211_HT_CAP_SGI_40 |
+	    IEEE80211_HT_CAP_TX_STBC |
+	    IEEE80211_HT_CAP_RX_STBC |
+	    IEEE80211_HT_CAP_PSMP_SUPPORT;
+	spec->ht.ampdu_factor = 3;
+	spec->ht.ampdu_density = 4;
+	spec->ht.mcs.tx_params =
+	    IEEE80211_HT_MCS_TX_DEFINED |
+	    IEEE80211_HT_MCS_TX_RX_DIFF |
+	    ((rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TXPATH) - 1) <<
+		IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT);
+
+	switch (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RXPATH)) {
+	case 3:
+		spec->ht.mcs.rx_mask[2] = 0xff;
+	case 2:
+		spec->ht.mcs.rx_mask[1] = 0xff;
+	case 1:
+		spec->ht.mcs.rx_mask[0] = 0xff;
+		spec->ht.mcs.rx_mask[4] = 0x1; /* MCS32 */
+		break;
+	}
+
+	/*
+	 * Create channel information array
+	 */
+	info = kzalloc(spec->num_channels * sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	spec->channels_info = info;
+
+	tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG1);
+	tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_BG2);
+
+	for (i = 0; i < 14; i++) {
+		info[i].tx_power1 = TXPOWER_G_FROM_DEV(tx_power1[i]);
+		info[i].tx_power2 = TXPOWER_G_FROM_DEV(tx_power2[i]);
+	}
+
+	if (spec->num_channels > 14) {
+		tx_power1 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A1);
+		tx_power2 = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A2);
+
+		for (i = 14; i < spec->num_channels; i++) {
+			info[i].tx_power1 = TXPOWER_A_FROM_DEV(tx_power1[i]);
+			info[i].tx_power2 = TXPOWER_A_FROM_DEV(tx_power2[i]);
+		}
+	}
+
+	return 0;
+}
+
+static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2800pci_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2800pci_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	retval = rt2800pci_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * This device has multiple filters for control frames
+	 * and has a separate filter for PS Poll frames.
+	 */
+	__set_bit(DRIVER_SUPPORT_CONTROL_FILTERS, &rt2x00dev->flags);
+	__set_bit(DRIVER_SUPPORT_CONTROL_FILTER_PSPOLL, &rt2x00dev->flags);
+
+	/*
+	 * This device requires firmware.
+	 */
+	if (!rt2x00_rt(&rt2x00dev->chip, RT2880) &&
+	    !rt2x00_rt(&rt2x00dev->chip, RT3052))
+		__set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags);
+	__set_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CONFIG_SUPPORT_HW_CRYPTO, &rt2x00dev->flags);
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+
+/*
+ * IEEE80211 stack callback functions.
+ */
+static void rt2800pci_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx,
+				   u32 *iv32, u16 *iv16)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct mac_iveiv_entry iveiv_entry;
+	u32 offset;
+
+	offset = MAC_IVEIV_ENTRY(hw_key_idx);
+	rt2x00pci_register_multiread(rt2x00dev, offset,
+				      &iveiv_entry, sizeof(iveiv_entry));
+
+	memcpy(&iveiv_entry.iv[0], iv16, sizeof(iv16));
+	memcpy(&iveiv_entry.iv[4], iv32, sizeof(iv32));
+}
+
+static int rt2800pci_set_rts_threshold(struct ieee80211_hw *hw, u32 value)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u32 reg;
+	bool enabled = (value < IEEE80211_MAX_RTS_THRESHOLD);
+
+	rt2x00pci_register_read(rt2x00dev, TX_RTS_CFG, &reg);
+	rt2x00_set_field32(&reg, TX_RTS_CFG_RTS_THRES, value);
+	rt2x00pci_register_write(rt2x00dev, TX_RTS_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, CCK_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, CCK_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, CCK_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, OFDM_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, OFDM_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, OFDM_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MM20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, MM20_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, MM40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, MM40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, MM40_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, GF20_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF20_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, GF20_PROT_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, GF40_PROT_CFG, &reg);
+	rt2x00_set_field32(&reg, GF40_PROT_CFG_RTS_TH_EN, enabled);
+	rt2x00pci_register_write(rt2x00dev, GF40_PROT_CFG, reg);
+
+	return 0;
+}
+
+static int rt2800pci_conf_tx(struct ieee80211_hw *hw, u16 queue_idx,
+			     const struct ieee80211_tx_queue_params *params)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	struct data_queue *queue;
+	struct rt2x00_field32 field;
+	int retval;
+	u32 reg;
+	u32 offset;
+
+	/*
+	 * First pass the configuration through rt2x00lib, that will
+	 * update the queue settings and validate the input. After that
+	 * we are free to update the registers based on the value
+	 * in the queue parameter.
+	 */
+	retval = rt2x00mac_conf_tx(hw, queue_idx, params);
+	if (retval)
+		return retval;
+
+	/*
+	 * We only need to perform additional register initialization
+	 * for WMM queues/
+	 */
+	if (queue_idx >= 4)
+		return 0;
+
+	queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
+
+	/* Update WMM TXOP register */
+	offset = WMM_TXOP0_CFG + (sizeof(u32) * (!!(queue_idx & 2)));
+	field.bit_offset = (queue_idx & 1) * 16;
+	field.bit_mask = 0xffff << field.bit_offset;
+
+	rt2x00pci_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, field, queue->txop);
+	rt2x00pci_register_write(rt2x00dev, offset, reg);
+
+	/* Update WMM registers */
+	field.bit_offset = queue_idx * 4;
+	field.bit_mask = 0xf << field.bit_offset;
+
+	rt2x00pci_register_read(rt2x00dev, WMM_AIFSN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->aifs);
+	rt2x00pci_register_write(rt2x00dev, WMM_AIFSN_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, WMM_CWMIN_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_min);
+	rt2x00pci_register_write(rt2x00dev, WMM_CWMIN_CFG, reg);
+
+	rt2x00pci_register_read(rt2x00dev, WMM_CWMAX_CFG, &reg);
+	rt2x00_set_field32(&reg, field, queue->cw_max);
+	rt2x00pci_register_write(rt2x00dev, WMM_CWMAX_CFG, reg);
+
+	/* Update EDCA registers */
+	offset = EDCA_AC0_CFG + (sizeof(u32) * queue_idx);
+
+	rt2x00pci_register_read(rt2x00dev, offset, &reg);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_TX_OP, queue->txop);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_AIFSN, queue->aifs);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMIN, queue->cw_min);
+	rt2x00_set_field32(&reg, EDCA_AC0_CFG_CWMAX, queue->cw_max);
+	rt2x00pci_register_write(rt2x00dev, offset, reg);
+
+	return 0;
+}
+
+static u64 rt2800pci_get_tsf(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	u64 tsf;
+	u32 reg;
+
+	rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW1, &reg);
+	tsf = (u64) rt2x00_get_field32(reg, TSF_TIMER_DW1_HIGH_WORD) << 32;
+	rt2x00pci_register_read(rt2x00dev, TSF_TIMER_DW0, &reg);
+	tsf |= rt2x00_get_field32(reg, TSF_TIMER_DW0_LOW_WORD);
+
+	return tsf;
+}
+
+static const struct ieee80211_ops rt2800pci_mac80211_ops = {
+	.tx			= rt2x00mac_tx,
+	.start			= rt2x00mac_start,
+	.stop			= rt2x00mac_stop,
+	.add_interface		= rt2x00mac_add_interface,
+	.remove_interface	= rt2x00mac_remove_interface,
+	.config			= rt2x00mac_config,
+	.configure_filter	= rt2x00mac_configure_filter,
+	.set_key		= rt2x00mac_set_key,
+	.get_stats		= rt2x00mac_get_stats,
+	.get_tkip_seq		= rt2800pci_get_tkip_seq,
+	.set_rts_threshold	= rt2800pci_set_rts_threshold,
+	.bss_info_changed	= rt2x00mac_bss_info_changed,
+	.conf_tx		= rt2800pci_conf_tx,
+	.get_tx_stats		= rt2x00mac_get_tx_stats,
+	.get_tsf		= rt2800pci_get_tsf,
+	.rfkill_poll		= rt2x00mac_rfkill_poll,
+};
+
+static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
+	.irq_handler		= rt2800pci_interrupt,
+	.probe_hw		= rt2800pci_probe_hw,
+	.get_firmware_name	= rt2800pci_get_firmware_name,
+	.check_firmware		= rt2800pci_check_firmware,
+	.load_firmware		= rt2800pci_load_firmware,
+	.initialize		= rt2x00pci_initialize,
+	.uninitialize		= rt2x00pci_uninitialize,
+	.get_entry_state	= rt2800pci_get_entry_state,
+	.clear_entry		= rt2800pci_clear_entry,
+	.set_device_state	= rt2800pci_set_device_state,
+	.rfkill_poll		= rt2800pci_rfkill_poll,
+	.link_stats		= rt2800pci_link_stats,
+	.reset_tuner		= rt2800pci_reset_tuner,
+	.link_tuner		= rt2800pci_link_tuner,
+	.write_tx_desc		= rt2800pci_write_tx_desc,
+	.write_tx_data		= rt2x00pci_write_tx_data,
+	.write_beacon		= rt2800pci_write_beacon,
+	.kick_tx_queue		= rt2800pci_kick_tx_queue,
+	.kill_tx_queue		= rt2800pci_kill_tx_queue,
+	.fill_rxdone		= rt2800pci_fill_rxdone,
+	.config_shared_key	= rt2800pci_config_shared_key,
+	.config_pairwise_key	= rt2800pci_config_pairwise_key,
+	.config_filter		= rt2800pci_config_filter,
+	.config_intf		= rt2800pci_config_intf,
+	.config_erp		= rt2800pci_config_erp,
+	.config_ant		= rt2800pci_config_ant,
+	.config			= rt2800pci_config,
+};
+
+static const struct data_queue_desc rt2800pci_queue_rx = {
+	.entry_num		= RX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= RXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt2800pci_queue_tx = {
+	.entry_num		= TX_ENTRIES,
+	.data_size		= AGGREGATION_SIZE,
+	.desc_size		= TXD_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct data_queue_desc rt2800pci_queue_bcn = {
+	.entry_num		= 8 * BEACON_ENTRIES,
+	.data_size		= 0, /* No DMA required for beacons */
+	.desc_size		= TXWI_DESC_SIZE,
+	.priv_size		= sizeof(struct queue_entry_priv_pci),
+};
+
+static const struct rt2x00_ops rt2800pci_ops = {
+	.name		= KBUILD_MODNAME,
+	.max_sta_intf	= 1,
+	.max_ap_intf	= 8,
+	.eeprom_size	= EEPROM_SIZE,
+	.rf_size	= RF_SIZE,
+	.tx_queues	= NUM_TX_QUEUES,
+	.rx		= &rt2800pci_queue_rx,
+	.tx		= &rt2800pci_queue_tx,
+	.bcn		= &rt2800pci_queue_bcn,
+	.lib		= &rt2800pci_rt2x00_ops,
+	.hw		= &rt2800pci_mac80211_ops,
+#ifdef CONFIG_RT2X00_LIB_DEBUGFS
+	.debugfs	= &rt2800pci_rt2x00debug,
+#endif /* CONFIG_RT2X00_LIB_DEBUGFS */
+};
+
+/*
+ * RT2800pci module information.
+ */
+static struct pci_device_id rt2800pci_device_table[] = {
+	{ PCI_DEVICE(0x1462, 0x891a), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7708), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7727), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7728), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7738), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7748), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7758), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1432, 0x7768), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0601), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0681), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0701), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x0781), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3060), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3062), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3090), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3091), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3092), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3562), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1814, 0x3592), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ PCI_DEVICE(0x1a3b, 0x1059), PCI_DEVICE_DATA(&rt2800pci_ops) },
+	{ 0, }
+};
+
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver.");
+MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards");
+#ifdef CONFIG_RT2800PCI_PCI
+MODULE_FIRMWARE(FIRMWARE_RT2860);
+MODULE_DEVICE_TABLE(pci, rt2800pci_device_table);
+#endif /* CONFIG_RT2800PCI_PCI */
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_RT2800PCI_WISOC
+#if defined(CONFIG_RALINK_RT288X)
+__rt2x00soc_probe(RT2880, &rt2800pci_ops);
+#elif defined(CONFIG_RALINK_RT305X)
+__rt2x00soc_probe(RT3052, &rt2800pci_ops);
+#endif
+
+static struct platform_driver rt2800soc_driver = {
+	.driver		= {
+		.name		= "rt2800_wmac",
+		.owner		= THIS_MODULE,
+		.mod_name	= KBUILD_MODNAME,
+	},
+	.probe		= __rt2x00soc_probe,
+	.remove		= __devexit_p(rt2x00soc_remove),
+	.suspend	= rt2x00soc_suspend,
+	.resume		= rt2x00soc_resume,
+};
+#endif /* CONFIG_RT2800PCI_WISOC */
+
+#ifdef CONFIG_RT2800PCI_PCI
+static struct pci_driver rt2800pci_driver = {
+	.name		= KBUILD_MODNAME,
+	.id_table	= rt2800pci_device_table,
+	.probe		= rt2x00pci_probe,
+	.remove		= __devexit_p(rt2x00pci_remove),
+	.suspend	= rt2x00pci_suspend,
+	.resume		= rt2x00pci_resume,
+};
+#endif /* CONFIG_RT2800PCI_PCI */
+
+static int __init rt2800pci_init(void)
+{
+	int ret = 0;
+
+#ifdef CONFIG_RT2800PCI_WISOC
+	ret = platform_driver_register(&rt2800soc_driver);
+	if (ret)
+		return ret;
+#endif
+#ifdef CONFIG_RT2800PCI_PCI
+	ret = pci_register_driver(&rt2800pci_driver);
+	if (ret) {
+#ifdef CONFIG_RT2800PCI_WISOC
+		platform_driver_unregister(&rt2800soc_driver);
+#endif
+		return ret;
+	}
+#endif
+
+	return ret;
+}
+
+static void __exit rt2800pci_exit(void)
+{
+#ifdef CONFIG_RT2800PCI_PCI
+	pci_unregister_driver(&rt2800pci_driver);
+#endif
+#ifdef CONFIG_RT2800PCI_WISOC
+	platform_driver_unregister(&rt2800soc_driver);
+#endif
+}
+
+module_init(rt2800pci_init);
+module_exit(rt2800pci_exit);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.h b/drivers/net/wireless/rt2x00/rt2800pci.h
new file mode 100644
index 0000000..8569088
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2800pci.h
@@ -0,0 +1,1960 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2800pci
+	Abstract: Data structures and registers for the rt2800pci module.
+	Supported chipsets: RT2800E & RT2800ED.
+ */
+
+#ifndef RT2800PCI_H
+#define RT2800PCI_H
+
+/*
+ * RF chip defines.
+ *
+ * RF2820 2.4G 2T3R
+ * RF2850 2.4G/5G 2T3R
+ * RF2720 2.4G 1T2R
+ * RF2750 2.4G/5G 1T2R
+ * RF3020 2.4G 1T1R
+ * RF2020 2.4G B/G
+ * RF3021 2.4G 1T2R
+ * RF3022 2.4G 2T2R
+ * RF3052 2.4G 2T2R
+ */
+#define RF2820				0x0001
+#define RF2850				0x0002
+#define RF2720				0x0003
+#define RF2750				0x0004
+#define RF3020				0x0005
+#define RF2020				0x0006
+#define RF3021				0x0007
+#define RF3022				0x0008
+#define RF3052				0x0009
+
+/*
+ * RT2860 version
+ */
+#define RT2860C_VERSION			0x28600100
+#define RT2860D_VERSION			0x28600101
+#define RT2880E_VERSION			0x28720200
+#define RT2883_VERSION			0x28830300
+#define RT3070_VERSION			0x30700200
+
+/*
+ * Signal information.
+ * Default offset is required for RSSI <-> dBm conversion.
+ */
+#define DEFAULT_RSSI_OFFSET		120 /* FIXME */
+
+/*
+ * Register layout information.
+ */
+#define CSR_REG_BASE			0x1000
+#define CSR_REG_SIZE			0x0800
+#define EEPROM_BASE			0x0000
+#define EEPROM_SIZE			0x0110
+#define BBP_BASE			0x0000
+#define BBP_SIZE			0x0080
+#define RF_BASE				0x0004
+#define RF_SIZE				0x0010
+
+/*
+ * Number of TX queues.
+ */
+#define NUM_TX_QUEUES			4
+
+/*
+ * PCI registers.
+ */
+
+/*
+ * E2PROM_CSR: EEPROM control register.
+ * RELOAD: Write 1 to reload eeprom content.
+ * TYPE: 0: 93c46, 1:93c66.
+ * LOAD_STATUS: 1:loading, 0:done.
+ */
+#define E2PROM_CSR			0x0004
+#define E2PROM_CSR_DATA_CLOCK		FIELD32(0x00000001)
+#define E2PROM_CSR_CHIP_SELECT		FIELD32(0x00000002)
+#define E2PROM_CSR_DATA_IN		FIELD32(0x00000004)
+#define E2PROM_CSR_DATA_OUT		FIELD32(0x00000008)
+#define E2PROM_CSR_TYPE			FIELD32(0x00000030)
+#define E2PROM_CSR_LOAD_STATUS		FIELD32(0x00000040)
+#define E2PROM_CSR_RELOAD		FIELD32(0x00000080)
+
+/*
+ * INT_SOURCE_CSR: Interrupt source register.
+ * Write one to clear corresponding bit.
+ * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c
+ */
+#define INT_SOURCE_CSR			0x0200
+#define INT_SOURCE_CSR_RXDELAYINT	FIELD32(0x00000001)
+#define INT_SOURCE_CSR_TXDELAYINT	FIELD32(0x00000002)
+#define INT_SOURCE_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_SOURCE_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_SOURCE_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_SOURCE_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_SOURCE_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_SOURCE_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_SOURCE_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_SOURCE_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_SOURCE_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_SOURCE_CSR_TBTT		FIELD32(0x00000800)
+#define INT_SOURCE_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_SOURCE_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_SOURCE_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_SOURCE_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_SOURCE_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_SOURCE_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
+ */
+#define INT_MASK_CSR			0x0204
+#define INT_MASK_CSR_RXDELAYINT		FIELD32(0x00000001)
+#define INT_MASK_CSR_TXDELAYINT		FIELD32(0x00000002)
+#define INT_MASK_CSR_RX_DONE		FIELD32(0x00000004)
+#define INT_MASK_CSR_AC0_DMA_DONE	FIELD32(0x00000008)
+#define INT_MASK_CSR_AC1_DMA_DONE	FIELD32(0x00000010)
+#define INT_MASK_CSR_AC2_DMA_DONE	FIELD32(0x00000020)
+#define INT_MASK_CSR_AC3_DMA_DONE	FIELD32(0x00000040)
+#define INT_MASK_CSR_HCCA_DMA_DONE	FIELD32(0x00000080)
+#define INT_MASK_CSR_MGMT_DMA_DONE	FIELD32(0x00000100)
+#define INT_MASK_CSR_MCU_COMMAND	FIELD32(0x00000200)
+#define INT_MASK_CSR_RXTX_COHERENT	FIELD32(0x00000400)
+#define INT_MASK_CSR_TBTT		FIELD32(0x00000800)
+#define INT_MASK_CSR_PRE_TBTT		FIELD32(0x00001000)
+#define INT_MASK_CSR_TX_FIFO_STATUS	FIELD32(0x00002000)
+#define INT_MASK_CSR_AUTO_WAKEUP	FIELD32(0x00004000)
+#define INT_MASK_CSR_GPTIMER		FIELD32(0x00008000)
+#define INT_MASK_CSR_RX_COHERENT	FIELD32(0x00010000)
+#define INT_MASK_CSR_TX_COHERENT	FIELD32(0x00020000)
+
+/*
+ * WPDMA_GLO_CFG
+ */
+#define WPDMA_GLO_CFG 			0x0208
+#define WPDMA_GLO_CFG_ENABLE_TX_DMA	FIELD32(0x00000001)
+#define WPDMA_GLO_CFG_TX_DMA_BUSY    	FIELD32(0x00000002)
+#define WPDMA_GLO_CFG_ENABLE_RX_DMA	FIELD32(0x00000004)
+#define WPDMA_GLO_CFG_RX_DMA_BUSY	FIELD32(0x00000008)
+#define WPDMA_GLO_CFG_WP_DMA_BURST_SIZE	FIELD32(0x00000030)
+#define WPDMA_GLO_CFG_TX_WRITEBACK_DONE	FIELD32(0x00000040)
+#define WPDMA_GLO_CFG_BIG_ENDIAN	FIELD32(0x00000080)
+#define WPDMA_GLO_CFG_RX_HDR_SCATTER	FIELD32(0x0000ff00)
+#define WPDMA_GLO_CFG_HDR_SEG_LEN	FIELD32(0xffff0000)
+
+/*
+ * WPDMA_RST_IDX
+ */
+#define WPDMA_RST_IDX 			0x020c
+#define WPDMA_RST_IDX_DTX_IDX0		FIELD32(0x00000001)
+#define WPDMA_RST_IDX_DTX_IDX1		FIELD32(0x00000002)
+#define WPDMA_RST_IDX_DTX_IDX2		FIELD32(0x00000004)
+#define WPDMA_RST_IDX_DTX_IDX3		FIELD32(0x00000008)
+#define WPDMA_RST_IDX_DTX_IDX4		FIELD32(0x00000010)
+#define WPDMA_RST_IDX_DTX_IDX5		FIELD32(0x00000020)
+#define WPDMA_RST_IDX_DRX_IDX0		FIELD32(0x00010000)
+
+/*
+ * DELAY_INT_CFG
+ */
+#define DELAY_INT_CFG			0x0210
+#define DELAY_INT_CFG_RXMAX_PTIME	FIELD32(0x000000ff)
+#define DELAY_INT_CFG_RXMAX_PINT	FIELD32(0x00007f00)
+#define DELAY_INT_CFG_RXDLY_INT_EN	FIELD32(0x00008000)
+#define DELAY_INT_CFG_TXMAX_PTIME	FIELD32(0x00ff0000)
+#define DELAY_INT_CFG_TXMAX_PINT	FIELD32(0x7f000000)
+#define DELAY_INT_CFG_TXDLY_INT_EN	FIELD32(0x80000000)
+
+/*
+ * WMM_AIFSN_CFG: Aifsn for each EDCA AC
+ * AIFSN0: AC_BE
+ * AIFSN1: AC_BK
+ * AIFSN1: AC_VI
+ * AIFSN1: AC_VO
+ */
+#define WMM_AIFSN_CFG			0x0214
+#define WMM_AIFSN_CFG_AIFSN0		FIELD32(0x0000000f)
+#define WMM_AIFSN_CFG_AIFSN1		FIELD32(0x000000f0)
+#define WMM_AIFSN_CFG_AIFSN2		FIELD32(0x00000f00)
+#define WMM_AIFSN_CFG_AIFSN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMIN_CSR: CWmin for each EDCA AC
+ * CWMIN0: AC_BE
+ * CWMIN1: AC_BK
+ * CWMIN1: AC_VI
+ * CWMIN1: AC_VO
+ */
+#define WMM_CWMIN_CFG			0x0218
+#define WMM_CWMIN_CFG_CWMIN0		FIELD32(0x0000000f)
+#define WMM_CWMIN_CFG_CWMIN1		FIELD32(0x000000f0)
+#define WMM_CWMIN_CFG_CWMIN2		FIELD32(0x00000f00)
+#define WMM_CWMIN_CFG_CWMIN3		FIELD32(0x0000f000)
+
+/*
+ * WMM_CWMAX_CSR: CWmax for each EDCA AC
+ * CWMAX0: AC_BE
+ * CWMAX1: AC_BK
+ * CWMAX1: AC_VI
+ * CWMAX1: AC_VO
+ */
+#define WMM_CWMAX_CFG			0x021c
+#define WMM_CWMAX_CFG_CWMAX0		FIELD32(0x0000000f)
+#define WMM_CWMAX_CFG_CWMAX1		FIELD32(0x000000f0)
+#define WMM_CWMAX_CFG_CWMAX2		FIELD32(0x00000f00)
+#define WMM_CWMAX_CFG_CWMAX3		FIELD32(0x0000f000)
+
+/*
+ * AC_TXOP0: AC_BK/AC_BE TXOP register
+ * AC0TXOP: AC_BK in unit of 32us
+ * AC1TXOP: AC_BE in unit of 32us
+ */
+#define WMM_TXOP0_CFG			0x0220
+#define WMM_TXOP0_CFG_AC0TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP0_CFG_AC1TXOP		FIELD32(0xffff0000)
+
+/*
+ * AC_TXOP1: AC_VO/AC_VI TXOP register
+ * AC2TXOP: AC_VI in unit of 32us
+ * AC3TXOP: AC_VO in unit of 32us
+ */
+#define WMM_TXOP1_CFG			0x0224
+#define WMM_TXOP1_CFG_AC2TXOP		FIELD32(0x0000ffff)
+#define WMM_TXOP1_CFG_AC3TXOP		FIELD32(0xffff0000)
+
+/*
+ * GPIO_CTRL_CFG:
+ */
+#define GPIO_CTRL_CFG			0x0228
+#define GPIO_CTRL_CFG_BIT0		FIELD32(0x00000001)
+#define GPIO_CTRL_CFG_BIT1		FIELD32(0x00000002)
+#define GPIO_CTRL_CFG_BIT2		FIELD32(0x00000004)
+#define GPIO_CTRL_CFG_BIT3		FIELD32(0x00000008)
+#define GPIO_CTRL_CFG_BIT4		FIELD32(0x00000010)
+#define GPIO_CTRL_CFG_BIT5		FIELD32(0x00000020)
+#define GPIO_CTRL_CFG_BIT6		FIELD32(0x00000040)
+#define GPIO_CTRL_CFG_BIT7		FIELD32(0x00000080)
+#define GPIO_CTRL_CFG_BIT8		FIELD32(0x00000100)
+
+/*
+ * MCU_CMD_CFG
+ */
+#define MCU_CMD_CFG			0x022c
+
+/*
+ * AC_BK register offsets
+ */
+#define TX_BASE_PTR0			0x0230
+#define TX_MAX_CNT0			0x0234
+#define TX_CTX_IDX0			0x0238
+#define TX_DTX_IDX0			0x023c
+
+/*
+ * AC_BE register offsets
+ */
+#define TX_BASE_PTR1			0x0240
+#define TX_MAX_CNT1			0x0244
+#define TX_CTX_IDX1			0x0248
+#define TX_DTX_IDX1			0x024c
+
+/*
+ * AC_VI register offsets
+ */
+#define TX_BASE_PTR2			0x0250
+#define TX_MAX_CNT2			0x0254
+#define TX_CTX_IDX2			0x0258
+#define TX_DTX_IDX2			0x025c
+
+/*
+ * AC_VO register offsets
+ */
+#define TX_BASE_PTR3			0x0260
+#define TX_MAX_CNT3			0x0264
+#define TX_CTX_IDX3			0x0268
+#define TX_DTX_IDX3			0x026c
+
+/*
+ * HCCA register offsets
+ */
+#define TX_BASE_PTR4			0x0270
+#define TX_MAX_CNT4			0x0274
+#define TX_CTX_IDX4			0x0278
+#define TX_DTX_IDX4			0x027c
+
+/*
+ * MGMT register offsets
+ */
+#define TX_BASE_PTR5			0x0280
+#define TX_MAX_CNT5			0x0284
+#define TX_CTX_IDX5			0x0288
+#define TX_DTX_IDX5			0x028c
+
+/*
+ * Queue register offset macros
+ */
+#define TX_QUEUE_REG_OFFSET		0x10
+#define TX_BASE_PTR(__x)		TX_BASE_PTR0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_MAX_CNT(__x)			TX_MAX_CNT0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_CTX_IDX(__x)			TX_CTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
+#define TX_DTX_IDX(__x)			TX_DTX_IDX0 + ((__x) * TX_QUEUE_REG_OFFSET)
+
+/*
+ * RX register offsets
+ */
+#define RX_BASE_PTR			0x0290
+#define RX_MAX_CNT			0x0294
+#define RX_CRX_IDX			0x0298
+#define RX_DRX_IDX			0x029c
+
+/*
+ * PBF_SYS_CTRL
+ * HOST_RAM_WRITE: enable Host program ram write selection
+ */
+#define PBF_SYS_CTRL			0x0400
+#define PBF_SYS_CTRL_READY		FIELD32(0x00000080)
+#define PBF_SYS_CTRL_HOST_RAM_WRITE	FIELD32(0x00010000)
+
+/*
+ * HOST-MCU shared memory
+ */
+#define HOST_CMD_CSR			0x0404
+#define HOST_CMD_CSR_HOST_COMMAND	FIELD32(0x000000ff)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define PBF_CFG				0x0408
+#define PBF_MAX_PCNT			0x040c
+#define PBF_CTRL			0x0410
+#define PBF_INT_STA			0x0414
+#define PBF_INT_ENA			0x0418
+
+/*
+ * BCN_OFFSET0:
+ */
+#define BCN_OFFSET0			0x042c
+#define BCN_OFFSET0_BCN0		FIELD32(0x000000ff)
+#define BCN_OFFSET0_BCN1		FIELD32(0x0000ff00)
+#define BCN_OFFSET0_BCN2		FIELD32(0x00ff0000)
+#define BCN_OFFSET0_BCN3		FIELD32(0xff000000)
+
+/*
+ * BCN_OFFSET1:
+ */
+#define BCN_OFFSET1			0x0430
+#define BCN_OFFSET1_BCN4		FIELD32(0x000000ff)
+#define BCN_OFFSET1_BCN5		FIELD32(0x0000ff00)
+#define BCN_OFFSET1_BCN6		FIELD32(0x00ff0000)
+#define BCN_OFFSET1_BCN7		FIELD32(0xff000000)
+
+/*
+ * PBF registers
+ * Most are for debug. Driver doesn't touch PBF register.
+ */
+#define TXRXQ_PCNT			0x0438
+#define PBF_DBG				0x043c
+
+/*
+ * RF registers
+ */
+#define	RF_CSR_CFG			0x0500
+#define RF_CSR_CFG_DATA			FIELD32(0x000000ff)
+#define RF_CSR_CFG_REGNUM		FIELD32(0x00001f00)
+#define RF_CSR_CFG_WRITE		FIELD32(0x00010000)
+#define RF_CSR_CFG_BUSY			FIELD32(0x00020000)
+
+/*
+ * EFUSE_CSR: RT3090 EEPROM
+ */
+#define EFUSE_CTRL			0x0580
+#define EFUSE_CTRL_ADDRESS_IN		FIELD32(0x03fe0000)
+#define EFUSE_CTRL_MODE			FIELD32(0x000000c0)
+#define EFUSE_CTRL_KICK			FIELD32(0x40000000)
+
+/*
+ * EFUSE_DATA0
+ */
+#define EFUSE_DATA0			0x0590
+
+/*
+ * EFUSE_DATA1
+ */
+#define EFUSE_DATA1			0x0594
+
+/*
+ * EFUSE_DATA2
+ */
+#define EFUSE_DATA2			0x0598
+
+/*
+ * EFUSE_DATA3
+ */
+#define EFUSE_DATA3			0x059c
+
+/*
+ * MAC Control/Status Registers(CSR).
+ * Some values are set in TU, whereas 1 TU == 1024 us.
+ */
+
+/*
+ * MAC_CSR0: ASIC revision number.
+ * ASIC_REV: 0
+ * ASIC_VER: 2860
+ */
+#define MAC_CSR0			0x1000
+#define MAC_CSR0_ASIC_REV		FIELD32(0x0000ffff)
+#define MAC_CSR0_ASIC_VER		FIELD32(0xffff0000)
+
+/*
+ * MAC_SYS_CTRL:
+ */
+#define MAC_SYS_CTRL			0x1004
+#define MAC_SYS_CTRL_RESET_CSR		FIELD32(0x00000001)
+#define MAC_SYS_CTRL_RESET_BBP		FIELD32(0x00000002)
+#define MAC_SYS_CTRL_ENABLE_TX		FIELD32(0x00000004)
+#define MAC_SYS_CTRL_ENABLE_RX		FIELD32(0x00000008)
+#define MAC_SYS_CTRL_CONTINUOUS_TX	FIELD32(0x00000010)
+#define MAC_SYS_CTRL_LOOPBACK		FIELD32(0x00000020)
+#define MAC_SYS_CTRL_WLAN_HALT		FIELD32(0x00000040)
+#define MAC_SYS_CTRL_RX_TIMESTAMP	FIELD32(0x00000080)
+
+/*
+ * MAC_ADDR_DW0: STA MAC register 0
+ */
+#define MAC_ADDR_DW0			0x1008
+#define MAC_ADDR_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_ADDR_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_ADDR_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_ADDR_DW1: STA MAC register 1
+ * UNICAST_TO_ME_MASK:
+ * Used to mask off bits from byte 5 of the MAC address
+ * to determine the UNICAST_TO_ME bit for RX frames.
+ * The full mask is complemented by BSS_ID_MASK:
+ *    MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
+ */
+#define MAC_ADDR_DW1			0x100c
+#define MAC_ADDR_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_ADDR_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_ADDR_DW1_UNICAST_TO_ME_MASK	FIELD32(0x00ff0000)
+
+/*
+ * MAC_BSSID_DW0: BSSID register 0
+ */
+#define MAC_BSSID_DW0			0x1010
+#define MAC_BSSID_DW0_BYTE0		FIELD32(0x000000ff)
+#define MAC_BSSID_DW0_BYTE1		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW0_BYTE2		FIELD32(0x00ff0000)
+#define MAC_BSSID_DW0_BYTE3		FIELD32(0xff000000)
+
+/*
+ * MAC_BSSID_DW1: BSSID register 1
+ * BSS_ID_MASK:
+ *     0: 1-BSSID mode (BSS index = 0)
+ *     1: 2-BSSID mode (BSS index: Byte5, bit 0)
+ *     2: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
+ *     3: 8-BSSID mode (BSS index: byte5, bit 0 - 2)
+ * This mask is used to mask off bits 0, 1 and 2 of byte 5 of the
+ * BSSID. This will make sure that those bits will be ignored
+ * when determining the MY_BSS of RX frames.
+ */
+#define MAC_BSSID_DW1			0x1014
+#define MAC_BSSID_DW1_BYTE4		FIELD32(0x000000ff)
+#define MAC_BSSID_DW1_BYTE5		FIELD32(0x0000ff00)
+#define MAC_BSSID_DW1_BSS_ID_MASK	FIELD32(0x00030000)
+#define MAC_BSSID_DW1_BSS_BCN_NUM	FIELD32(0x001c0000)
+
+/*
+ * MAX_LEN_CFG: Maximum frame length register.
+ * MAX_MPDU: rt2860b max 16k bytes
+ * MAX_PSDU: Maximum PSDU length
+ *	(power factor) 0:2^13, 1:2^14, 2:2^15, 3:2^16
+ */
+#define MAX_LEN_CFG			0x1018
+#define MAX_LEN_CFG_MAX_MPDU		FIELD32(0x00000fff)
+#define MAX_LEN_CFG_MAX_PSDU		FIELD32(0x00003000)
+#define MAX_LEN_CFG_MIN_PSDU		FIELD32(0x0000c000)
+#define MAX_LEN_CFG_MIN_MPDU		FIELD32(0x000f0000)
+
+/*
+ * BBP_CSR_CFG: BBP serial control register
+ * VALUE: Register value to program into BBP
+ * REG_NUM: Selected BBP register
+ * READ_CONTROL: 0 write BBP, 1 read BBP
+ * BUSY: ASIC is busy executing BBP commands
+ * BBP_PAR_DUR: 0 4 MAC clocks, 1 8 MAC clocks
+ * BBP_RW_MODE: 0 serial, 1 paralell
+ */
+#define BBP_CSR_CFG			0x101c
+#define BBP_CSR_CFG_VALUE		FIELD32(0x000000ff)
+#define BBP_CSR_CFG_REGNUM		FIELD32(0x0000ff00)
+#define BBP_CSR_CFG_READ_CONTROL	FIELD32(0x00010000)
+#define BBP_CSR_CFG_BUSY		FIELD32(0x00020000)
+#define BBP_CSR_CFG_BBP_PAR_DUR		FIELD32(0x00040000)
+#define BBP_CSR_CFG_BBP_RW_MODE		FIELD32(0x00080000)
+
+/*
+ * RF_CSR_CFG0: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * BITWIDTH: Selected RF register
+ * STANDBYMODE: 0 high when standby, 1 low when standby
+ * SEL: 0 RF_LE0 activate, 1 RF_LE1 activate
+ * BUSY: ASIC is busy executing RF commands
+ */
+#define RF_CSR_CFG0			0x1020
+#define RF_CSR_CFG0_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG0_BITWIDTH		FIELD32(0x1f000000)
+#define RF_CSR_CFG0_REG_VALUE_BW	FIELD32(0x1fffffff)
+#define RF_CSR_CFG0_STANDBYMODE		FIELD32(0x20000000)
+#define RF_CSR_CFG0_SEL			FIELD32(0x40000000)
+#define RF_CSR_CFG0_BUSY		FIELD32(0x80000000)
+
+/*
+ * RF_CSR_CFG1: RF control register
+ * REGID_AND_VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG1			0x1024
+#define RF_CSR_CFG1_REGID_AND_VALUE	FIELD32(0x00ffffff)
+#define RF_CSR_CFG1_RFGAP		FIELD32(0x1f000000)
+
+/*
+ * RF_CSR_CFG2: RF control register
+ * VALUE: Register value to program into RF
+ * RFGAP: Gap between BB_CONTROL_RF and RF_LE
+ *        0: 3 system clock cycle (37.5usec)
+ *        1: 5 system clock cycle (62.5usec)
+ */
+#define RF_CSR_CFG2			0x1028
+#define RF_CSR_CFG2_VALUE		FIELD32(0x00ffffff)
+
+/*
+ * LED_CFG: LED control
+ * color LED's:
+ *   0: off
+ *   1: blinking upon TX2
+ *   2: periodic slow blinking
+ *   3: always on
+ * LED polarity:
+ *   0: active low
+ *   1: active high
+ */
+#define LED_CFG				0x102c
+#define LED_CFG_ON_PERIOD		FIELD32(0x000000ff)
+#define LED_CFG_OFF_PERIOD		FIELD32(0x0000ff00)
+#define LED_CFG_SLOW_BLINK_PERIOD	FIELD32(0x003f0000)
+#define LED_CFG_R_LED_MODE		FIELD32(0x03000000)
+#define LED_CFG_G_LED_MODE		FIELD32(0x0c000000)
+#define LED_CFG_Y_LED_MODE		FIELD32(0x30000000)
+#define LED_CFG_LED_POLAR		FIELD32(0x40000000)
+
+/*
+ * XIFS_TIME_CFG: MAC timing
+ * CCKM_SIFS_TIME: unit 1us. Applied after CCK RX/TX
+ * OFDM_SIFS_TIME: unit 1us. Applied after OFDM RX/TX
+ * OFDM_XIFS_TIME: unit 1us. Applied after OFDM RX
+ *	when MAC doesn't reference BBP signal BBRXEND
+ * EIFS: unit 1us
+ * BB_RXEND_ENABLE: reference RXEND signal to begin XIFS defer
+ *
+ */
+#define XIFS_TIME_CFG			0x1100
+#define XIFS_TIME_CFG_CCKM_SIFS_TIME	FIELD32(0x000000ff)
+#define XIFS_TIME_CFG_OFDM_SIFS_TIME	FIELD32(0x0000ff00)
+#define XIFS_TIME_CFG_OFDM_XIFS_TIME	FIELD32(0x000f0000)
+#define XIFS_TIME_CFG_EIFS		FIELD32(0x1ff00000)
+#define XIFS_TIME_CFG_BB_RXEND_ENABLE	FIELD32(0x20000000)
+
+/*
+ * BKOFF_SLOT_CFG:
+ */
+#define BKOFF_SLOT_CFG			0x1104
+#define BKOFF_SLOT_CFG_SLOT_TIME	FIELD32(0x000000ff)
+#define BKOFF_SLOT_CFG_CC_DELAY_TIME	FIELD32(0x0000ff00)
+
+/*
+ * NAV_TIME_CFG:
+ */
+#define NAV_TIME_CFG			0x1108
+#define NAV_TIME_CFG_SIFS		FIELD32(0x000000ff)
+#define NAV_TIME_CFG_SLOT_TIME		FIELD32(0x0000ff00)
+#define NAV_TIME_CFG_EIFS		FIELD32(0x01ff0000)
+#define NAV_TIME_ZERO_SIFS		FIELD32(0x02000000)
+
+/*
+ * CH_TIME_CFG: count as channel busy
+ */
+#define CH_TIME_CFG     	        0x110c
+
+/*
+ * PBF_LIFE_TIMER: TX/RX MPDU timestamp timer (free run) Unit: 1us
+ */
+#define PBF_LIFE_TIMER     	        0x1110
+
+/*
+ * BCN_TIME_CFG:
+ * BEACON_INTERVAL: in unit of 1/16 TU
+ * TSF_TICKING: Enable TSF auto counting
+ * TSF_SYNC: Enable TSF sync, 00: disable, 01: infra mode, 10: ad-hoc mode
+ * BEACON_GEN: Enable beacon generator
+ */
+#define BCN_TIME_CFG			0x1114
+#define BCN_TIME_CFG_BEACON_INTERVAL	FIELD32(0x0000ffff)
+#define BCN_TIME_CFG_TSF_TICKING	FIELD32(0x00010000)
+#define BCN_TIME_CFG_TSF_SYNC		FIELD32(0x00060000)
+#define BCN_TIME_CFG_TBTT_ENABLE	FIELD32(0x00080000)
+#define BCN_TIME_CFG_BEACON_GEN		FIELD32(0x00100000)
+#define BCN_TIME_CFG_TX_TIME_COMPENSATE	FIELD32(0xf0000000)
+
+/*
+ * TBTT_SYNC_CFG:
+ */
+#define TBTT_SYNC_CFG			0x1118
+
+/*
+ * TSF_TIMER_DW0: Local lsb TSF timer, read-only
+ */
+#define TSF_TIMER_DW0			0x111c
+#define TSF_TIMER_DW0_LOW_WORD		FIELD32(0xffffffff)
+
+/*
+ * TSF_TIMER_DW1: Local msb TSF timer, read-only
+ */
+#define TSF_TIMER_DW1			0x1120
+#define TSF_TIMER_DW1_HIGH_WORD		FIELD32(0xffffffff)
+
+/*
+ * TBTT_TIMER: TImer remains till next TBTT, read-only
+ */
+#define TBTT_TIMER			0x1124
+
+/*
+ * INT_TIMER_CFG:
+ */
+#define INT_TIMER_CFG			0x1128
+
+/*
+ * INT_TIMER_EN: GP-timer and pre-tbtt Int enable
+ */
+#define INT_TIMER_EN			0x112c
+
+/*
+ * CH_IDLE_STA: channel idle time
+ */
+#define CH_IDLE_STA			0x1130
+
+/*
+ * CH_BUSY_STA: channel busy time
+ */
+#define CH_BUSY_STA			0x1134
+
+/*
+ * MAC_STATUS_CFG:
+ * BBP_RF_BUSY: When set to 0, BBP and RF are stable.
+ *	if 1 or higher one of the 2 registers is busy.
+ */
+#define MAC_STATUS_CFG			0x1200
+#define MAC_STATUS_CFG_BBP_RF_BUSY	FIELD32(0x00000003)
+
+/*
+ * PWR_PIN_CFG:
+ */
+#define PWR_PIN_CFG			0x1204
+
+/*
+ * AUTOWAKEUP_CFG: Manual power control / status register
+ * TBCN_BEFORE_WAKE: ForceWake has high privilege than PutToSleep when both set
+ * AUTOWAKE: 0:sleep, 1:awake
+ */
+#define AUTOWAKEUP_CFG			0x1208
+#define AUTOWAKEUP_CFG_AUTO_LEAD_TIME	FIELD32(0x000000ff)
+#define AUTOWAKEUP_CFG_TBCN_BEFORE_WAKE	FIELD32(0x00007f00)
+#define AUTOWAKEUP_CFG_AUTOWAKE		FIELD32(0x00008000)
+
+/*
+ * EDCA_AC0_CFG:
+ */
+#define EDCA_AC0_CFG			0x1300
+#define EDCA_AC0_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC0_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC0_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC0_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC1_CFG:
+ */
+#define EDCA_AC1_CFG			0x1304
+#define EDCA_AC1_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC1_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC1_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC1_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC2_CFG:
+ */
+#define EDCA_AC2_CFG			0x1308
+#define EDCA_AC2_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC2_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC2_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC2_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_AC3_CFG:
+ */
+#define EDCA_AC3_CFG			0x130c
+#define EDCA_AC3_CFG_TX_OP		FIELD32(0x000000ff)
+#define EDCA_AC3_CFG_AIFSN		FIELD32(0x00000f00)
+#define EDCA_AC3_CFG_CWMIN		FIELD32(0x0000f000)
+#define EDCA_AC3_CFG_CWMAX		FIELD32(0x000f0000)
+
+/*
+ * EDCA_TID_AC_MAP:
+ */
+#define EDCA_TID_AC_MAP			0x1310
+
+/*
+ * TX_PWR_CFG_0:
+ */
+#define TX_PWR_CFG_0			0x1314
+#define TX_PWR_CFG_0_1MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_0_2MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_0_55MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_0_11MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_0_6MBS		FIELD32(0x000f0000)
+#define TX_PWR_CFG_0_9MBS		FIELD32(0x00f00000)
+#define TX_PWR_CFG_0_12MBS		FIELD32(0x0f000000)
+#define TX_PWR_CFG_0_18MBS		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_1:
+ */
+#define TX_PWR_CFG_1			0x1318
+#define TX_PWR_CFG_1_24MBS		FIELD32(0x0000000f)
+#define TX_PWR_CFG_1_36MBS		FIELD32(0x000000f0)
+#define TX_PWR_CFG_1_48MBS		FIELD32(0x00000f00)
+#define TX_PWR_CFG_1_54MBS		FIELD32(0x0000f000)
+#define TX_PWR_CFG_1_MCS0		FIELD32(0x000f0000)
+#define TX_PWR_CFG_1_MCS1		FIELD32(0x00f00000)
+#define TX_PWR_CFG_1_MCS2		FIELD32(0x0f000000)
+#define TX_PWR_CFG_1_MCS3		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_2:
+ */
+#define TX_PWR_CFG_2			0x131c
+#define TX_PWR_CFG_2_MCS4		FIELD32(0x0000000f)
+#define TX_PWR_CFG_2_MCS5		FIELD32(0x000000f0)
+#define TX_PWR_CFG_2_MCS6		FIELD32(0x00000f00)
+#define TX_PWR_CFG_2_MCS7		FIELD32(0x0000f000)
+#define TX_PWR_CFG_2_MCS8		FIELD32(0x000f0000)
+#define TX_PWR_CFG_2_MCS9		FIELD32(0x00f00000)
+#define TX_PWR_CFG_2_MCS10		FIELD32(0x0f000000)
+#define TX_PWR_CFG_2_MCS11		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_3:
+ */
+#define TX_PWR_CFG_3			0x1320
+#define TX_PWR_CFG_3_MCS12		FIELD32(0x0000000f)
+#define TX_PWR_CFG_3_MCS13		FIELD32(0x000000f0)
+#define TX_PWR_CFG_3_MCS14		FIELD32(0x00000f00)
+#define TX_PWR_CFG_3_MCS15		FIELD32(0x0000f000)
+#define TX_PWR_CFG_3_UKNOWN1		FIELD32(0x000f0000)
+#define TX_PWR_CFG_3_UKNOWN2		FIELD32(0x00f00000)
+#define TX_PWR_CFG_3_UKNOWN3		FIELD32(0x0f000000)
+#define TX_PWR_CFG_3_UKNOWN4		FIELD32(0xf0000000)
+
+/*
+ * TX_PWR_CFG_4:
+ */
+#define TX_PWR_CFG_4			0x1324
+#define TX_PWR_CFG_4_UKNOWN5		FIELD32(0x0000000f)
+#define TX_PWR_CFG_4_UKNOWN6		FIELD32(0x000000f0)
+#define TX_PWR_CFG_4_UKNOWN7		FIELD32(0x00000f00)
+#define TX_PWR_CFG_4_UKNOWN8		FIELD32(0x0000f000)
+
+/*
+ * TX_PIN_CFG:
+ */
+#define TX_PIN_CFG			0x1328
+#define TX_PIN_CFG_PA_PE_A0_EN		FIELD32(0x00000001)
+#define TX_PIN_CFG_PA_PE_G0_EN		FIELD32(0x00000002)
+#define TX_PIN_CFG_PA_PE_A1_EN		FIELD32(0x00000004)
+#define TX_PIN_CFG_PA_PE_G1_EN		FIELD32(0x00000008)
+#define TX_PIN_CFG_PA_PE_A0_POL		FIELD32(0x00000010)
+#define TX_PIN_CFG_PA_PE_G0_POL		FIELD32(0x00000020)
+#define TX_PIN_CFG_PA_PE_A1_POL		FIELD32(0x00000040)
+#define TX_PIN_CFG_PA_PE_G1_POL		FIELD32(0x00000080)
+#define TX_PIN_CFG_LNA_PE_A0_EN		FIELD32(0x00000100)
+#define TX_PIN_CFG_LNA_PE_G0_EN		FIELD32(0x00000200)
+#define TX_PIN_CFG_LNA_PE_A1_EN		FIELD32(0x00000400)
+#define TX_PIN_CFG_LNA_PE_G1_EN		FIELD32(0x00000800)
+#define TX_PIN_CFG_LNA_PE_A0_POL	FIELD32(0x00001000)
+#define TX_PIN_CFG_LNA_PE_G0_POL	FIELD32(0x00002000)
+#define TX_PIN_CFG_LNA_PE_A1_POL	FIELD32(0x00004000)
+#define TX_PIN_CFG_LNA_PE_G1_POL	FIELD32(0x00008000)
+#define TX_PIN_CFG_RFTR_EN		FIELD32(0x00010000)
+#define TX_PIN_CFG_RFTR_POL		FIELD32(0x00020000)
+#define TX_PIN_CFG_TRSW_EN		FIELD32(0x00040000)
+#define TX_PIN_CFG_TRSW_POL		FIELD32(0x00080000)
+
+/*
+ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz
+ */
+#define TX_BAND_CFG			0x132c
+#define TX_BAND_CFG_HT40_PLUS		FIELD32(0x00000001)
+#define TX_BAND_CFG_A			FIELD32(0x00000002)
+#define TX_BAND_CFG_BG			FIELD32(0x00000004)
+
+/*
+ * TX_SW_CFG0:
+ */
+#define TX_SW_CFG0			0x1330
+
+/*
+ * TX_SW_CFG1:
+ */
+#define TX_SW_CFG1			0x1334
+
+/*
+ * TX_SW_CFG2:
+ */
+#define TX_SW_CFG2			0x1338
+
+/*
+ * TXOP_THRES_CFG:
+ */
+#define TXOP_THRES_CFG			0x133c
+
+/*
+ * TXOP_CTRL_CFG:
+ */
+#define TXOP_CTRL_CFG			0x1340
+
+/*
+ * TX_RTS_CFG:
+ * RTS_THRES: unit:byte
+ * RTS_FBK_EN: enable rts rate fallback
+ */
+#define TX_RTS_CFG			0x1344
+#define TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTS_CFG_RTS_THRES		FIELD32(0x00ffff00)
+#define TX_RTS_CFG_RTS_FBK_EN		FIELD32(0x01000000)
+
+/*
+ * TX_TIMEOUT_CFG:
+ * MPDU_LIFETIME: expiration time = 2^(9+MPDU LIFE TIME) us
+ * RX_ACK_TIMEOUT: unit:slot. Used for TX procedure
+ * TX_OP_TIMEOUT: TXOP timeout value for TXOP truncation.
+ *                it is recommended that:
+ *                (SLOT_TIME) > (TX_OP_TIMEOUT) > (RX_ACK_TIMEOUT)
+ */
+#define TX_TIMEOUT_CFG			0x1348
+#define TX_TIMEOUT_CFG_MPDU_LIFETIME	FIELD32(0x000000f0)
+#define TX_TIMEOUT_CFG_RX_ACK_TIMEOUT	FIELD32(0x0000ff00)
+#define TX_TIMEOUT_CFG_TX_OP_TIMEOUT	FIELD32(0x00ff0000)
+
+/*
+ * TX_RTY_CFG:
+ * SHORT_RTY_LIMIT: short retry limit
+ * LONG_RTY_LIMIT: long retry limit
+ * LONG_RTY_THRE: Long retry threshoold
+ * NON_AGG_RTY_MODE: Non-Aggregate MPDU retry mode
+ *                   0:expired by retry limit, 1: expired by mpdu life timer
+ * AGG_RTY_MODE: Aggregate MPDU retry mode
+ *               0:expired by retry limit, 1: expired by mpdu life timer
+ * TX_AUTO_FB_ENABLE: Tx retry PHY rate auto fallback enable
+ */
+#define TX_RTY_CFG			0x134c
+#define TX_RTY_CFG_SHORT_RTY_LIMIT	FIELD32(0x000000ff)
+#define TX_RTY_CFG_LONG_RTY_LIMIT	FIELD32(0x0000ff00)
+#define TX_RTY_CFG_LONG_RTY_THRE	FIELD32(0x0fff0000)
+#define TX_RTY_CFG_NON_AGG_RTY_MODE	FIELD32(0x10000000)
+#define TX_RTY_CFG_AGG_RTY_MODE		FIELD32(0x20000000)
+#define TX_RTY_CFG_TX_AUTO_FB_ENABLE	FIELD32(0x40000000)
+
+/*
+ * TX_LINK_CFG:
+ * REMOTE_MFB_LIFETIME: remote MFB life time. unit: 32us
+ * MFB_ENABLE: TX apply remote MFB 1:enable
+ * REMOTE_UMFS_ENABLE: remote unsolicit  MFB enable
+ *                     0: not apply remote remote unsolicit (MFS=7)
+ * TX_MRQ_EN: MCS request TX enable
+ * TX_RDG_EN: RDG TX enable
+ * TX_CF_ACK_EN: Piggyback CF-ACK enable
+ * REMOTE_MFB: remote MCS feedback
+ * REMOTE_MFS: remote MCS feedback sequence number
+ */
+#define TX_LINK_CFG			0x1350
+#define TX_LINK_CFG_REMOTE_MFB_LIFETIME	FIELD32(0x000000ff)
+#define TX_LINK_CFG_MFB_ENABLE		FIELD32(0x00000100)
+#define TX_LINK_CFG_REMOTE_UMFS_ENABLE	FIELD32(0x00000200)
+#define TX_LINK_CFG_TX_MRQ_EN		FIELD32(0x00000400)
+#define TX_LINK_CFG_TX_RDG_EN		FIELD32(0x00000800)
+#define TX_LINK_CFG_TX_CF_ACK_EN	FIELD32(0x00001000)
+#define TX_LINK_CFG_REMOTE_MFB		FIELD32(0x00ff0000)
+#define TX_LINK_CFG_REMOTE_MFS		FIELD32(0xff000000)
+
+/*
+ * HT_FBK_CFG0:
+ */
+#define HT_FBK_CFG0			0x1354
+#define HT_FBK_CFG0_HTMCS0FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG0_HTMCS1FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG0_HTMCS2FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG0_HTMCS3FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG0_HTMCS4FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG0_HTMCS5FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG0_HTMCS6FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG0_HTMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * HT_FBK_CFG1:
+ */
+#define HT_FBK_CFG1			0x1358
+#define HT_FBK_CFG1_HTMCS8FBK		FIELD32(0x0000000f)
+#define HT_FBK_CFG1_HTMCS9FBK		FIELD32(0x000000f0)
+#define HT_FBK_CFG1_HTMCS10FBK		FIELD32(0x00000f00)
+#define HT_FBK_CFG1_HTMCS11FBK		FIELD32(0x0000f000)
+#define HT_FBK_CFG1_HTMCS12FBK		FIELD32(0x000f0000)
+#define HT_FBK_CFG1_HTMCS13FBK		FIELD32(0x00f00000)
+#define HT_FBK_CFG1_HTMCS14FBK		FIELD32(0x0f000000)
+#define HT_FBK_CFG1_HTMCS15FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG0:
+ */
+#define LG_FBK_CFG0			0x135c
+#define LG_FBK_CFG0_OFDMMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_OFDMMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_OFDMMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_OFDMMCS3FBK		FIELD32(0x0000f000)
+#define LG_FBK_CFG0_OFDMMCS4FBK		FIELD32(0x000f0000)
+#define LG_FBK_CFG0_OFDMMCS5FBK		FIELD32(0x00f00000)
+#define LG_FBK_CFG0_OFDMMCS6FBK		FIELD32(0x0f000000)
+#define LG_FBK_CFG0_OFDMMCS7FBK		FIELD32(0xf0000000)
+
+/*
+ * LG_FBK_CFG1:
+ */
+#define LG_FBK_CFG1			0x1360
+#define LG_FBK_CFG0_CCKMCS0FBK		FIELD32(0x0000000f)
+#define LG_FBK_CFG0_CCKMCS1FBK		FIELD32(0x000000f0)
+#define LG_FBK_CFG0_CCKMCS2FBK		FIELD32(0x00000f00)
+#define LG_FBK_CFG0_CCKMCS3FBK		FIELD32(0x0000f000)
+
+/*
+ * CCK_PROT_CFG: CCK Protection
+ * PROTECT_RATE: Protection control frame rate for CCK TX(RTS/CTS/CFEnd)
+ * PROTECT_CTRL: Protection control frame type for CCK TX
+ *               0:none, 1:RTS/CTS, 2:CTS-to-self
+ * PROTECT_NAV: TXOP protection type for CCK TX
+ *              0:none, 1:ShortNAVprotect, 2:LongNAVProtect
+ * TX_OP_ALLOW_CCK: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_OFDM: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_MM40: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF20: CCK TXOP allowance, 0:disallow
+ * TX_OP_ALLOW_GF40: CCK TXOP allowance, 0:disallow
+ * RTS_TH_EN: RTS threshold enable on CCK TX
+ */
+#define CCK_PROT_CFG			0x1364
+#define CCK_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define CCK_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define CCK_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define CCK_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define CCK_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * OFDM_PROT_CFG: OFDM Protection
+ */
+#define OFDM_PROT_CFG			0x1368
+#define OFDM_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define OFDM_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define OFDM_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define OFDM_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define OFDM_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM20_PROT_CFG: MM20 Protection
+ */
+#define MM20_PROT_CFG			0x136c
+#define MM20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * MM40_PROT_CFG: MM40 Protection
+ */
+#define MM40_PROT_CFG			0x1370
+#define MM40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define MM40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define MM40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define MM40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define MM40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF20_PROT_CFG: GF20 Protection
+ */
+#define GF20_PROT_CFG			0x1374
+#define GF20_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF20_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF20_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF20_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF20_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * GF40_PROT_CFG: GF40 Protection
+ */
+#define GF40_PROT_CFG			0x1378
+#define GF40_PROT_CFG_PROTECT_RATE	FIELD32(0x0000ffff)
+#define GF40_PROT_CFG_PROTECT_CTRL	FIELD32(0x00030000)
+#define GF40_PROT_CFG_PROTECT_NAV	FIELD32(0x000c0000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_CCK	FIELD32(0x00100000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_OFDM	FIELD32(0x00200000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM20	FIELD32(0x00400000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_MM40	FIELD32(0x00800000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF20	FIELD32(0x01000000)
+#define GF40_PROT_CFG_TX_OP_ALLOW_GF40	FIELD32(0x02000000)
+#define GF40_PROT_CFG_RTS_TH_EN		FIELD32(0x04000000)
+
+/*
+ * EXP_CTS_TIME:
+ */
+#define EXP_CTS_TIME			0x137c
+
+/*
+ * EXP_ACK_TIME:
+ */
+#define EXP_ACK_TIME			0x1380
+
+/*
+ * RX_FILTER_CFG: RX configuration register.
+ */
+#define RX_FILTER_CFG			0x1400
+#define RX_FILTER_CFG_DROP_CRC_ERROR	FIELD32(0x00000001)
+#define RX_FILTER_CFG_DROP_PHY_ERROR	FIELD32(0x00000002)
+#define RX_FILTER_CFG_DROP_NOT_TO_ME	FIELD32(0x00000004)
+#define RX_FILTER_CFG_DROP_NOT_MY_BSSD	FIELD32(0x00000008)
+#define RX_FILTER_CFG_DROP_VER_ERROR	FIELD32(0x00000010)
+#define RX_FILTER_CFG_DROP_MULTICAST	FIELD32(0x00000020)
+#define RX_FILTER_CFG_DROP_BROADCAST	FIELD32(0x00000040)
+#define RX_FILTER_CFG_DROP_DUPLICATE	FIELD32(0x00000080)
+#define RX_FILTER_CFG_DROP_CF_END_ACK	FIELD32(0x00000100)
+#define RX_FILTER_CFG_DROP_CF_END	FIELD32(0x00000200)
+#define RX_FILTER_CFG_DROP_ACK		FIELD32(0x00000400)
+#define RX_FILTER_CFG_DROP_CTS		FIELD32(0x00000800)
+#define RX_FILTER_CFG_DROP_RTS		FIELD32(0x00001000)
+#define RX_FILTER_CFG_DROP_PSPOLL	FIELD32(0x00002000)
+#define RX_FILTER_CFG_DROP_BA		FIELD32(0x00004000)
+#define RX_FILTER_CFG_DROP_BAR		FIELD32(0x00008000)
+#define RX_FILTER_CFG_DROP_CNTL		FIELD32(0x00010000)
+
+/*
+ * AUTO_RSP_CFG:
+ * AUTORESPONDER: 0: disable, 1: enable
+ * BAC_ACK_POLICY: 0:long, 1:short preamble
+ * CTS_40_MMODE: Response CTS 40MHz duplicate mode
+ * CTS_40_MREF: Response CTS 40MHz duplicate mode
+ * AR_PREAMBLE: Auto responder preamble 0:long, 1:short preamble
+ * DUAL_CTS_EN: Power bit value in control frame
+ * ACK_CTS_PSM_BIT:Power bit value in control frame
+ */
+#define AUTO_RSP_CFG			0x1404
+#define AUTO_RSP_CFG_AUTORESPONDER	FIELD32(0x00000001)
+#define AUTO_RSP_CFG_BAC_ACK_POLICY	FIELD32(0x00000002)
+#define AUTO_RSP_CFG_CTS_40_MMODE	FIELD32(0x00000004)
+#define AUTO_RSP_CFG_CTS_40_MREF	FIELD32(0x00000008)
+#define AUTO_RSP_CFG_AR_PREAMBLE	FIELD32(0x00000010)
+#define AUTO_RSP_CFG_DUAL_CTS_EN	FIELD32(0x00000040)
+#define AUTO_RSP_CFG_ACK_CTS_PSM_BIT	FIELD32(0x00000080)
+
+/*
+ * LEGACY_BASIC_RATE:
+ */
+#define LEGACY_BASIC_RATE		0x1408
+
+/*
+ * HT_BASIC_RATE:
+ */
+#define HT_BASIC_RATE			0x140c
+
+/*
+ * HT_CTRL_CFG:
+ */
+#define HT_CTRL_CFG			0x1410
+
+/*
+ * SIFS_COST_CFG:
+ */
+#define SIFS_COST_CFG			0x1414
+
+/*
+ * RX_PARSER_CFG:
+ * Set NAV for all received frames
+ */
+#define RX_PARSER_CFG			0x1418
+
+/*
+ * TX_SEC_CNT0:
+ */
+#define TX_SEC_CNT0			0x1500
+
+/*
+ * RX_SEC_CNT0:
+ */
+#define RX_SEC_CNT0			0x1504
+
+/*
+ * CCMP_FC_MUTE:
+ */
+#define CCMP_FC_MUTE			0x1508
+
+/*
+ * TXOP_HLDR_ADDR0:
+ */
+#define TXOP_HLDR_ADDR0			0x1600
+
+/*
+ * TXOP_HLDR_ADDR1:
+ */
+#define TXOP_HLDR_ADDR1			0x1604
+
+/*
+ * TXOP_HLDR_ET:
+ */
+#define TXOP_HLDR_ET			0x1608
+
+/*
+ * QOS_CFPOLL_RA_DW0:
+ */
+#define QOS_CFPOLL_RA_DW0		0x160c
+
+/*
+ * QOS_CFPOLL_RA_DW1:
+ */
+#define QOS_CFPOLL_RA_DW1		0x1610
+
+/*
+ * QOS_CFPOLL_QC:
+ */
+#define QOS_CFPOLL_QC			0x1614
+
+/*
+ * RX_STA_CNT0: RX PLCP error count & RX CRC error count
+ */
+#define RX_STA_CNT0			0x1700
+#define RX_STA_CNT0_CRC_ERR		FIELD32(0x0000ffff)
+#define RX_STA_CNT0_PHY_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT1: RX False CCA count & RX LONG frame count
+ */
+#define RX_STA_CNT1			0x1704
+#define RX_STA_CNT1_FALSE_CCA		FIELD32(0x0000ffff)
+#define RX_STA_CNT1_PLCP_ERR		FIELD32(0xffff0000)
+
+/*
+ * RX_STA_CNT2:
+ */
+#define RX_STA_CNT2			0x1708
+#define RX_STA_CNT2_RX_DUPLI_COUNT	FIELD32(0x0000ffff)
+#define RX_STA_CNT2_RX_FIFO_OVERFLOW	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT0: TX Beacon count
+ */
+#define TX_STA_CNT0			0x170c
+#define TX_STA_CNT0_TX_FAIL_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT0_TX_BEACON_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT1: TX tx count
+ */
+#define TX_STA_CNT1			0x1710
+#define TX_STA_CNT1_TX_SUCCESS		FIELD32(0x0000ffff)
+#define TX_STA_CNT1_TX_RETRANSMIT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_CNT2: TX tx count
+ */
+#define TX_STA_CNT2			0x1714
+#define TX_STA_CNT2_TX_ZERO_LEN_COUNT	FIELD32(0x0000ffff)
+#define TX_STA_CNT2_TX_UNDER_FLOW_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_STA_FIFO: TX Result for specific PID status fifo register
+ */
+#define TX_STA_FIFO			0x1718
+#define TX_STA_FIFO_VALID		FIELD32(0x00000001)
+#define TX_STA_FIFO_PID_TYPE		FIELD32(0x0000001e)
+#define TX_STA_FIFO_TX_SUCCESS		FIELD32(0x00000020)
+#define TX_STA_FIFO_TX_AGGRE		FIELD32(0x00000040)
+#define TX_STA_FIFO_TX_ACK_REQUIRED	FIELD32(0x00000080)
+#define TX_STA_FIFO_WCID		FIELD32(0x0000ff00)
+#define TX_STA_FIFO_MCS			FIELD32(0x007f0000)
+#define TX_STA_FIFO_PHYMODE		FIELD32(0xc0000000)
+
+/*
+ * TX_AGG_CNT: Debug counter
+ */
+#define TX_AGG_CNT			0x171c
+#define TX_AGG_CNT_NON_AGG_TX_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT_AGG_TX_COUNT		FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT0:
+ */
+#define TX_AGG_CNT0			0x1720
+#define TX_AGG_CNT0_AGG_SIZE_1_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT0_AGG_SIZE_2_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT1:
+ */
+#define TX_AGG_CNT1			0x1724
+#define TX_AGG_CNT1_AGG_SIZE_3_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT1_AGG_SIZE_4_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT2:
+ */
+#define TX_AGG_CNT2			0x1728
+#define TX_AGG_CNT2_AGG_SIZE_5_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT2_AGG_SIZE_6_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT3:
+ */
+#define TX_AGG_CNT3			0x172c
+#define TX_AGG_CNT3_AGG_SIZE_7_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT3_AGG_SIZE_8_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT4:
+ */
+#define TX_AGG_CNT4			0x1730
+#define TX_AGG_CNT4_AGG_SIZE_9_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT4_AGG_SIZE_10_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT5:
+ */
+#define TX_AGG_CNT5			0x1734
+#define TX_AGG_CNT5_AGG_SIZE_11_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT5_AGG_SIZE_12_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT6:
+ */
+#define TX_AGG_CNT6			0x1738
+#define TX_AGG_CNT6_AGG_SIZE_13_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT6_AGG_SIZE_14_COUNT	FIELD32(0xffff0000)
+
+/*
+ * TX_AGG_CNT7:
+ */
+#define TX_AGG_CNT7			0x173c
+#define TX_AGG_CNT7_AGG_SIZE_15_COUNT	FIELD32(0x0000ffff)
+#define TX_AGG_CNT7_AGG_SIZE_16_COUNT	FIELD32(0xffff0000)
+
+/*
+ * MPDU_DENSITY_CNT:
+ * TX_ZERO_DEL: TX zero length delimiter count
+ * RX_ZERO_DEL: RX zero length delimiter count
+ */
+#define MPDU_DENSITY_CNT		0x1740
+#define MPDU_DENSITY_CNT_TX_ZERO_DEL	FIELD32(0x0000ffff)
+#define MPDU_DENSITY_CNT_RX_ZERO_DEL	FIELD32(0xffff0000)
+
+/*
+ * Security key table memory.
+ * MAC_WCID_BASE: 8-bytes (use only 6 bytes) * 256 entry
+ * PAIRWISE_KEY_TABLE_BASE: 32-byte * 256 entry
+ * MAC_IVEIV_TABLE_BASE: 8-byte * 256-entry
+ * MAC_WCID_ATTRIBUTE_BASE: 4-byte * 256-entry
+ * SHARED_KEY_TABLE_BASE: 32 bytes * 32-entry
+ * SHARED_KEY_MODE_BASE: 4 bits * 32-entry
+ */
+#define MAC_WCID_BASE			0x1800
+#define PAIRWISE_KEY_TABLE_BASE		0x4000
+#define MAC_IVEIV_TABLE_BASE		0x6000
+#define MAC_WCID_ATTRIBUTE_BASE		0x6800
+#define SHARED_KEY_TABLE_BASE		0x6c00
+#define SHARED_KEY_MODE_BASE		0x7000
+
+#define MAC_WCID_ENTRY(__idx) \
+	( MAC_WCID_BASE + ((__idx) * sizeof(struct mac_wcid_entry)) )
+#define PAIRWISE_KEY_ENTRY(__idx) \
+	( PAIRWISE_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define MAC_IVEIV_ENTRY(__idx) \
+	( MAC_IVEIV_TABLE_BASE + ((__idx) & sizeof(struct mac_iveiv_entry)) )
+#define MAC_WCID_ATTR_ENTRY(__idx) \
+	( MAC_WCID_ATTRIBUTE_BASE + ((__idx) * sizeof(u32)) )
+#define SHARED_KEY_ENTRY(__idx) \
+	( SHARED_KEY_TABLE_BASE + ((__idx) * sizeof(struct hw_key_entry)) )
+#define SHARED_KEY_MODE_ENTRY(__idx) \
+	( SHARED_KEY_MODE_BASE + ((__idx) * sizeof(u32)) )
+
+struct mac_wcid_entry {
+	u8 mac[6];
+	u8 reserved[2];
+} __attribute__ ((packed));
+
+struct hw_key_entry {
+	u8 key[16];
+	u8 tx_mic[8];
+	u8 rx_mic[8];
+} __attribute__ ((packed));
+
+struct mac_iveiv_entry {
+	u8 iv[8];
+} __attribute__ ((packed));
+
+/*
+ * MAC_WCID_ATTRIBUTE:
+ */
+#define MAC_WCID_ATTRIBUTE_KEYTAB	FIELD32(0x00000001)
+#define MAC_WCID_ATTRIBUTE_CIPHER	FIELD32(0x0000000e)
+#define MAC_WCID_ATTRIBUTE_BSS_IDX	FIELD32(0x00000070)
+#define MAC_WCID_ATTRIBUTE_RX_WIUDF	FIELD32(0x00000380)
+
+/*
+ * SHARED_KEY_MODE:
+ */
+#define SHARED_KEY_MODE_BSS0_KEY0	FIELD32(0x00000007)
+#define SHARED_KEY_MODE_BSS0_KEY1	FIELD32(0x00000070)
+#define SHARED_KEY_MODE_BSS0_KEY2	FIELD32(0x00000700)
+#define SHARED_KEY_MODE_BSS0_KEY3	FIELD32(0x00007000)
+#define SHARED_KEY_MODE_BSS1_KEY0	FIELD32(0x00070000)
+#define SHARED_KEY_MODE_BSS1_KEY1	FIELD32(0x00700000)
+#define SHARED_KEY_MODE_BSS1_KEY2	FIELD32(0x07000000)
+#define SHARED_KEY_MODE_BSS1_KEY3	FIELD32(0x70000000)
+
+/*
+ * HOST-MCU communication
+ */
+
+/*
+ * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
+ */
+#define H2M_MAILBOX_CSR			0x7010
+#define H2M_MAILBOX_CSR_ARG0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CSR_ARG1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CSR_CMD_TOKEN	FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CSR_OWNER		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_CID:
+ */
+#define H2M_MAILBOX_CID			0x7014
+#define H2M_MAILBOX_CID_CMD0		FIELD32(0x000000ff)
+#define H2M_MAILBOX_CID_CMD1		FIELD32(0x0000ff00)
+#define H2M_MAILBOX_CID_CMD2		FIELD32(0x00ff0000)
+#define H2M_MAILBOX_CID_CMD3		FIELD32(0xff000000)
+
+/*
+ * H2M_MAILBOX_STATUS:
+ */
+#define H2M_MAILBOX_STATUS		0x701c
+
+/*
+ * H2M_INT_SRC:
+ */
+#define H2M_INT_SRC			0x7024
+
+/*
+ * H2M_BBP_AGENT:
+ */
+#define H2M_BBP_AGENT			0x7028
+
+/*
+ * MCU_LEDCS: LED control for MCU Mailbox.
+ */
+#define MCU_LEDCS_LED_MODE		FIELD8(0x1f)
+#define MCU_LEDCS_POLARITY		FIELD8(0x01)
+
+/*
+ * HW_CS_CTS_BASE:
+ * Carrier-sense CTS frame base address.
+ * It's where mac stores carrier-sense frame for carrier-sense function.
+ */
+#define HW_CS_CTS_BASE			0x7700
+
+/*
+ * HW_DFS_CTS_BASE:
+ * FS CTS frame base address. It's where mac stores CTS frame for DFS.
+ */
+#define HW_DFS_CTS_BASE			0x7780
+
+/*
+ * TXRX control registers - base address 0x3000
+ */
+
+/*
+ * TXRX_CSR1:
+ * rt2860b  UNKNOWN reg use R/O Reg Addr 0x77d0 first..
+ */
+#define TXRX_CSR1			0x77d0
+
+/*
+ * HW_DEBUG_SETTING_BASE:
+ * since NULL frame won't be that long (256 byte)
+ * We steal 16 tail bytes to save debugging settings
+ */
+#define HW_DEBUG_SETTING_BASE		0x77f0
+#define HW_DEBUG_SETTING_BASE2		0x7770
+
+/*
+ * HW_BEACON_BASE
+ * In order to support maximum 8 MBSS and its maximum length
+ * is 512 bytes for each beacon
+ * Three section discontinue memory segments will be used.
+ * 1. The original region for BCN 0~3
+ * 2. Extract memory from FCE table for BCN 4~5
+ * 3. Extract memory from Pair-wise key table for BCN 6~7
+ *    It occupied those memory of wcid 238~253 for BCN 6
+ *    and wcid 222~237 for BCN 7
+ *
+ * IMPORTANT NOTE: Not sure why legacy driver does this,
+ * but HW_BEACON_BASE7 is 0x0200 bytes below HW_BEACON_BASE6.
+ */
+#define HW_BEACON_BASE0			0x7800
+#define HW_BEACON_BASE1			0x7a00
+#define HW_BEACON_BASE2			0x7c00
+#define HW_BEACON_BASE3			0x7e00
+#define HW_BEACON_BASE4			0x7200
+#define HW_BEACON_BASE5			0x7400
+#define HW_BEACON_BASE6			0x5dc0
+#define HW_BEACON_BASE7			0x5bc0
+
+#define HW_BEACON_OFFSET(__index) \
+	( ((__index) < 4) ? ( HW_BEACON_BASE0 + (__index * 0x0200) ) : \
+	  (((__index) < 6) ? ( HW_BEACON_BASE4 + ((__index - 4) * 0x0200) ) : \
+	  (HW_BEACON_BASE6 - ((__index - 6) * 0x0200))) )
+
+/*
+ * 8051 firmware image.
+ */
+#define FIRMWARE_RT2860			"rt2860.bin"
+#define FIRMWARE_IMAGE_BASE		0x2000
+
+/*
+ * BBP registers.
+ * The wordsize of the BBP is 8 bits.
+ */
+
+/*
+ * BBP 1: TX Antenna
+ */
+#define BBP1_TX_POWER			FIELD8(0x07)
+#define BBP1_TX_ANTENNA			FIELD8(0x18)
+
+/*
+ * BBP 3: RX Antenna
+ */
+#define BBP3_RX_ANTENNA			FIELD8(0x18)
+#define BBP3_HT40_PLUS			FIELD8(0x20)
+
+/*
+ * BBP 4: Bandwidth
+ */
+#define BBP4_TX_BF			FIELD8(0x01)
+#define BBP4_BANDWIDTH			FIELD8(0x18)
+
+/*
+ * RFCSR registers
+ * The wordsize of the RFCSR is 8 bits.
+ */
+
+/*
+ * RFCSR 6:
+ */
+#define RFCSR6_R			FIELD8(0x03)
+
+/*
+ * RFCSR 7:
+ */
+#define RFCSR7_RF_TUNING		FIELD8(0x01)
+
+/*
+ * RFCSR 12:
+ */
+#define RFCSR12_TX_POWER		FIELD8(0x1f)
+
+/*
+ * RFCSR 22:
+ */
+#define RFCSR22_BASEBAND_LOOPBACK	FIELD8(0x01)
+
+/*
+ * RFCSR 23:
+ */
+#define RFCSR23_FREQ_OFFSET		FIELD8(0x7f)
+
+/*
+ * RFCSR 30:
+ */
+#define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
+
+/*
+ * RF registers
+ */
+
+/*
+ * RF 2
+ */
+#define RF2_ANTENNA_RX2			FIELD32(0x00000040)
+#define RF2_ANTENNA_TX1			FIELD32(0x00004000)
+#define RF2_ANTENNA_RX1			FIELD32(0x00020000)
+
+/*
+ * RF 3
+ */
+#define RF3_TXPOWER_G			FIELD32(0x00003e00)
+#define RF3_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000200)
+#define RF3_TXPOWER_A			FIELD32(0x00003c00)
+
+/*
+ * RF 4
+ */
+#define RF4_TXPOWER_G			FIELD32(0x000007c0)
+#define RF4_TXPOWER_A_7DBM_BOOST	FIELD32(0x00000040)
+#define RF4_TXPOWER_A			FIELD32(0x00000780)
+#define RF4_FREQ_OFFSET			FIELD32(0x001f8000)
+#define RF4_HT40			FIELD32(0x00200000)
+
+/*
+ * EEPROM content.
+ * The wordsize of the EEPROM is 16 bits.
+ */
+
+/*
+ * EEPROM Version
+ */
+#define EEPROM_VERSION			0x0001
+#define EEPROM_VERSION_FAE		FIELD16(0x00ff)
+#define EEPROM_VERSION_VERSION		FIELD16(0xff00)
+
+/*
+ * HW MAC address.
+ */
+#define EEPROM_MAC_ADDR_0		0x0002
+#define EEPROM_MAC_ADDR_BYTE0		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE1		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_1		0x0003
+#define EEPROM_MAC_ADDR_BYTE2		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE3		FIELD16(0xff00)
+#define EEPROM_MAC_ADDR_2		0x0004
+#define EEPROM_MAC_ADDR_BYTE4		FIELD16(0x00ff)
+#define EEPROM_MAC_ADDR_BYTE5		FIELD16(0xff00)
+
+/*
+ * EEPROM ANTENNA config
+ * RXPATH: 1: 1R, 2: 2R, 3: 3R
+ * TXPATH: 1: 1T, 2: 2T
+ */
+#define	EEPROM_ANTENNA			0x001a
+#define EEPROM_ANTENNA_RXPATH		FIELD16(0x000f)
+#define EEPROM_ANTENNA_TXPATH		FIELD16(0x00f0)
+#define EEPROM_ANTENNA_RF_TYPE		FIELD16(0x0f00)
+
+/*
+ * EEPROM NIC config
+ * CARDBUS_ACCEL: 0 - enable, 1 - disable
+ */
+#define	EEPROM_NIC			0x001b
+#define EEPROM_NIC_HW_RADIO		FIELD16(0x0001)
+#define EEPROM_NIC_DYNAMIC_TX_AGC	FIELD16(0x0002)
+#define EEPROM_NIC_EXTERNAL_LNA_BG	FIELD16(0x0004)
+#define EEPROM_NIC_EXTERNAL_LNA_A	FIELD16(0x0008)
+#define EEPROM_NIC_CARDBUS_ACCEL	FIELD16(0x0010)
+#define EEPROM_NIC_BW40M_SB_BG		FIELD16(0x0020)
+#define EEPROM_NIC_BW40M_SB_A		FIELD16(0x0040)
+#define EEPROM_NIC_WPS_PBC		FIELD16(0x0080)
+#define EEPROM_NIC_BW40M_BG		FIELD16(0x0100)
+#define EEPROM_NIC_BW40M_A		FIELD16(0x0200)
+
+/*
+ * EEPROM frequency
+ */
+#define	EEPROM_FREQ			0x001d
+#define EEPROM_FREQ_OFFSET		FIELD16(0x00ff)
+#define EEPROM_FREQ_LED_MODE		FIELD16(0x7f00)
+#define EEPROM_FREQ_LED_POLARITY	FIELD16(0x1000)
+
+/*
+ * EEPROM LED
+ * POLARITY_RDY_G: Polarity RDY_G setting.
+ * POLARITY_RDY_A: Polarity RDY_A setting.
+ * POLARITY_ACT: Polarity ACT setting.
+ * POLARITY_GPIO_0: Polarity GPIO0 setting.
+ * POLARITY_GPIO_1: Polarity GPIO1 setting.
+ * POLARITY_GPIO_2: Polarity GPIO2 setting.
+ * POLARITY_GPIO_3: Polarity GPIO3 setting.
+ * POLARITY_GPIO_4: Polarity GPIO4 setting.
+ * LED_MODE: Led mode.
+ */
+#define EEPROM_LED1			0x001e
+#define EEPROM_LED2			0x001f
+#define EEPROM_LED3			0x0020
+#define EEPROM_LED_POLARITY_RDY_BG	FIELD16(0x0001)
+#define EEPROM_LED_POLARITY_RDY_A	FIELD16(0x0002)
+#define EEPROM_LED_POLARITY_ACT		FIELD16(0x0004)
+#define EEPROM_LED_POLARITY_GPIO_0	FIELD16(0x0008)
+#define EEPROM_LED_POLARITY_GPIO_1	FIELD16(0x0010)
+#define EEPROM_LED_POLARITY_GPIO_2	FIELD16(0x0020)
+#define EEPROM_LED_POLARITY_GPIO_3	FIELD16(0x0040)
+#define EEPROM_LED_POLARITY_GPIO_4	FIELD16(0x0080)
+#define EEPROM_LED_LED_MODE		FIELD16(0x1f00)
+
+/*
+ * EEPROM LNA
+ */
+#define EEPROM_LNA			0x0022
+#define EEPROM_LNA_BG			FIELD16(0x00ff)
+#define EEPROM_LNA_A0			FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG offset
+ */
+#define EEPROM_RSSI_BG			0x0023
+#define EEPROM_RSSI_BG_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI BG2 offset
+ */
+#define EEPROM_RSSI_BG2			0x0024
+#define EEPROM_RSSI_BG2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_BG2_LNA_A1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A offset
+ */
+#define EEPROM_RSSI_A			0x0025
+#define EEPROM_RSSI_A_OFFSET0		FIELD16(0x00ff)
+#define EEPROM_RSSI_A_OFFSET1		FIELD16(0xff00)
+
+/*
+ * EEPROM RSSI A2 offset
+ */
+#define EEPROM_RSSI_A2			0x0026
+#define EEPROM_RSSI_A2_OFFSET2		FIELD16(0x00ff)
+#define EEPROM_RSSI_A2_LNA_A2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower delta: 20MHZ AND 40 MHZ use different power.
+ *	This is delta in 40MHZ.
+ * VALUE: Tx Power dalta value (MAX=4)
+ * TYPE: 1: Plus the delta value, 0: minus the delta value
+ * TXPOWER: Enable:
+ */
+#define EEPROM_TXPOWER_DELTA		0x0028
+#define EEPROM_TXPOWER_DELTA_VALUE	FIELD16(0x003f)
+#define EEPROM_TXPOWER_DELTA_TYPE	FIELD16(0x0040)
+#define EEPROM_TXPOWER_DELTA_TXPOWER	FIELD16(0x0080)
+
+/*
+ * EEPROM TXPOWER 802.11BG
+ */
+#define	EEPROM_TXPOWER_BG1		0x0029
+#define	EEPROM_TXPOWER_BG2		0x0030
+#define EEPROM_TXPOWER_BG_SIZE		7
+#define EEPROM_TXPOWER_BG_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_BG_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXPOWER 802.11A
+ */
+#define EEPROM_TXPOWER_A1		0x003c
+#define EEPROM_TXPOWER_A2		0x0053
+#define EEPROM_TXPOWER_A_SIZE		6
+#define EEPROM_TXPOWER_A_1		FIELD16(0x00ff)
+#define EEPROM_TXPOWER_A_2		FIELD16(0xff00)
+
+/*
+ * EEPROM TXpower byrate: 20MHZ power
+ */
+#define EEPROM_TXPOWER_BYRATE		0x006f
+
+/*
+ * EEPROM BBP.
+ */
+#define	EEPROM_BBP_START		0x0078
+#define EEPROM_BBP_SIZE			16
+#define EEPROM_BBP_VALUE		FIELD16(0x00ff)
+#define EEPROM_BBP_REG_ID		FIELD16(0xff00)
+
+/*
+ * MCU mailbox commands.
+ */
+#define MCU_SLEEP			0x30
+#define MCU_WAKEUP			0x31
+#define MCU_RADIO_OFF			0x35
+#define MCU_CURRENT			0x36
+#define MCU_LED				0x50
+#define MCU_LED_STRENGTH		0x51
+#define MCU_LED_1			0x52
+#define MCU_LED_2			0x53
+#define MCU_LED_3			0x54
+#define MCU_RADAR			0x60
+#define MCU_BOOT_SIGNAL			0x72
+#define MCU_BBP_SIGNAL			0x80
+#define MCU_POWER_SAVE			0x83
+
+/*
+ * MCU mailbox tokens
+ */
+#define TOKEN_WAKUP			3
+
+/*
+ * DMA descriptor defines.
+ */
+#define TXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define TXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXD_DESC_SIZE			( 4 * sizeof(__le32) )
+#define RXWI_DESC_SIZE			( 4 * sizeof(__le32) )
+
+/*
+ * TX descriptor format for TX, PRIO and Beacon Ring.
+ */
+
+/*
+ * Word0
+ */
+#define TXD_W0_SD_PTR0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define TXD_W1_SD_LEN1			FIELD32(0x00003fff)
+#define TXD_W1_LAST_SEC1		FIELD32(0x00004000)
+#define TXD_W1_BURST			FIELD32(0x00008000)
+#define TXD_W1_SD_LEN0			FIELD32(0x3fff0000)
+#define TXD_W1_LAST_SEC0		FIELD32(0x40000000)
+#define TXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define TXD_W2_SD_PTR1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * WIV: Wireless Info Valid. 1: Driver filled WI, 0: DMA needs to copy WI
+ * QSEL: Select on-chip FIFO ID for 2nd-stage output scheduler.
+ *       0:MGMT, 1:HCCA 2:EDCA
+ */
+#define TXD_W3_WIV			FIELD32(0x01000000)
+#define TXD_W3_QSEL			FIELD32(0x06000000)
+#define TXD_W3_TCO			FIELD32(0x20000000)
+#define TXD_W3_UCO			FIELD32(0x40000000)
+#define TXD_W3_ICO			FIELD32(0x80000000)
+
+/*
+ * TX WI structure
+ */
+
+/*
+ * Word0
+ * FRAG: 1 To inform TKIP engine this is a fragment.
+ * MIMO_PS: The remote peer is in dynamic MIMO-PS mode
+ * TX_OP: 0:HT TXOP rule , 1:PIFS TX ,2:Backoff, 3:sifs
+ * BW: Channel bandwidth 20MHz or 40 MHz
+ * STBC: 1: STBC support MCS =0-7, 2,3 : RESERVED
+ */
+#define TXWI_W0_FRAG			FIELD32(0x00000001)
+#define TXWI_W0_MIMO_PS			FIELD32(0x00000002)
+#define TXWI_W0_CF_ACK			FIELD32(0x00000004)
+#define TXWI_W0_TS			FIELD32(0x00000008)
+#define TXWI_W0_AMPDU			FIELD32(0x00000010)
+#define TXWI_W0_MPDU_DENSITY		FIELD32(0x000000e0)
+#define TXWI_W0_TX_OP			FIELD32(0x00000300)
+#define TXWI_W0_MCS			FIELD32(0x007f0000)
+#define TXWI_W0_BW			FIELD32(0x00800000)
+#define TXWI_W0_SHORT_GI		FIELD32(0x01000000)
+#define TXWI_W0_STBC			FIELD32(0x06000000)
+#define TXWI_W0_IFS			FIELD32(0x08000000)
+#define TXWI_W0_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word1
+ */
+#define TXWI_W1_ACK			FIELD32(0x00000001)
+#define TXWI_W1_NSEQ			FIELD32(0x00000002)
+#define TXWI_W1_BW_WIN_SIZE		FIELD32(0x000000fc)
+#define TXWI_W1_WIRELESS_CLI_ID		FIELD32(0x0000ff00)
+#define TXWI_W1_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define TXWI_W1_PACKETID		FIELD32(0xf0000000)
+
+/*
+ * Word2
+ */
+#define TXWI_W2_IV			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ */
+#define TXWI_W3_EIV			FIELD32(0xffffffff)
+
+/*
+ * RX descriptor format for RX Ring.
+ */
+
+/*
+ * Word0
+ */
+#define RXD_W0_SDP0			FIELD32(0xffffffff)
+
+/*
+ * Word1
+ */
+#define RXD_W1_SDL1			FIELD32(0x00003fff)
+#define RXD_W1_SDL0			FIELD32(0x3fff0000)
+#define RXD_W1_LS0			FIELD32(0x40000000)
+#define RXD_W1_DMA_DONE			FIELD32(0x80000000)
+
+/*
+ * Word2
+ */
+#define RXD_W2_SDP1			FIELD32(0xffffffff)
+
+/*
+ * Word3
+ * AMSDU: RX with 802.3 header, not 802.11 header.
+ * DECRYPTED: This frame is being decrypted.
+ */
+#define RXD_W3_BA			FIELD32(0x00000001)
+#define RXD_W3_DATA			FIELD32(0x00000002)
+#define RXD_W3_NULLDATA			FIELD32(0x00000004)
+#define RXD_W3_FRAG			FIELD32(0x00000008)
+#define RXD_W3_UNICAST_TO_ME		FIELD32(0x00000010)
+#define RXD_W3_MULTICAST		FIELD32(0x00000020)
+#define RXD_W3_BROADCAST		FIELD32(0x00000040)
+#define RXD_W3_MY_BSS			FIELD32(0x00000080)
+#define RXD_W3_CRC_ERROR		FIELD32(0x00000100)
+#define RXD_W3_CIPHER_ERROR		FIELD32(0x00000600)
+#define RXD_W3_AMSDU			FIELD32(0x00000800)
+#define RXD_W3_HTC			FIELD32(0x00001000)
+#define RXD_W3_RSSI			FIELD32(0x00002000)
+#define RXD_W3_L2PAD			FIELD32(0x00004000)
+#define RXD_W3_AMPDU			FIELD32(0x00008000)
+#define RXD_W3_DECRYPTED		FIELD32(0x00010000)
+#define RXD_W3_PLCP_SIGNAL		FIELD32(0x00020000)
+#define RXD_W3_PLCP_RSSI		FIELD32(0x00040000)
+
+/*
+ * RX WI structure
+ */
+
+/*
+ * Word0
+ */
+#define RXWI_W0_WIRELESS_CLI_ID		FIELD32(0x000000ff)
+#define RXWI_W0_KEY_INDEX		FIELD32(0x00000300)
+#define RXWI_W0_BSSID			FIELD32(0x00001c00)
+#define RXWI_W0_UDF			FIELD32(0x0000e000)
+#define RXWI_W0_MPDU_TOTAL_BYTE_COUNT	FIELD32(0x0fff0000)
+#define RXWI_W0_TID			FIELD32(0xf0000000)
+
+/*
+ * Word1
+ */
+#define RXWI_W1_FRAG			FIELD32(0x0000000f)
+#define RXWI_W1_SEQUENCE		FIELD32(0x0000fff0)
+#define RXWI_W1_MCS			FIELD32(0x007f0000)
+#define RXWI_W1_BW			FIELD32(0x00800000)
+#define RXWI_W1_SHORT_GI		FIELD32(0x01000000)
+#define RXWI_W1_STBC			FIELD32(0x06000000)
+#define RXWI_W1_PHYMODE			FIELD32(0xc0000000)
+
+/*
+ * Word2
+ */
+#define RXWI_W2_RSSI0			FIELD32(0x000000ff)
+#define RXWI_W2_RSSI1			FIELD32(0x0000ff00)
+#define RXWI_W2_RSSI2			FIELD32(0x00ff0000)
+
+/*
+ * Word3
+ */
+#define RXWI_W3_SNR0			FIELD32(0x000000ff)
+#define RXWI_W3_SNR1			FIELD32(0x0000ff00)
+
+/*
+ * Macros for converting txpower from EEPROM to mac80211 value
+ * and from mac80211 value to register value.
+ */
+#define MIN_G_TXPOWER	0
+#define MIN_A_TXPOWER	-7
+#define MAX_G_TXPOWER	31
+#define MAX_A_TXPOWER	15
+#define DEFAULT_TXPOWER	5
+
+#define TXPOWER_G_FROM_DEV(__txpower) \
+	((__txpower) > MAX_G_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_G_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_G_TXPOWER, MAX_G_TXPOWER)
+
+#define TXPOWER_A_FROM_DEV(__txpower) \
+	((__txpower) > MAX_A_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
+
+#define TXPOWER_A_TO_DEV(__txpower) \
+	clamp_t(char, __txpower, MIN_A_TXPOWER, MAX_A_TXPOWER)
+
+#endif /* RT2800PCI_H */
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 27bc6b7..196de8a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -158,6 +158,13 @@
 #define RT2561		0x0302
 #define RT2661		0x0401
 #define RT2571		0x1300
+#define RT2860		0x0601	/* 2.4GHz PCI/CB */
+#define RT2860D		0x0681	/* 2.4GHz, 5GHz PCI/CB */
+#define RT2890		0x0701	/* 2.4GHz PCIe */
+#define RT2890D		0x0781	/* 2.4GHz, 5GHz PCIe */
+#define RT2880		0x2880	/* WSOC */
+#define RT3052		0x3052	/* WSOC */
+#define RT3090		0x3090	/* 2.4GHz PCIe */
 #define RT2870		0x1600
 
 	u16 rf;
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.c b/drivers/net/wireless/rt2x00/rt2x00soc.c
new file mode 100644
index 0000000..539568c
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.c
@@ -0,0 +1,159 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00soc
+	Abstract: rt2x00 generic soc device routines.
+ */
+
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "rt2x00.h"
+#include "rt2x00soc.h"
+
+static void rt2x00soc_free_reg(struct rt2x00_dev *rt2x00dev)
+{
+	kfree(rt2x00dev->rf);
+	rt2x00dev->rf = NULL;
+
+	kfree(rt2x00dev->eeprom);
+	rt2x00dev->eeprom = NULL;
+}
+
+static int rt2x00soc_alloc_reg(struct rt2x00_dev *rt2x00dev)
+{
+	struct platform_device *pdev = to_platform_device(rt2x00dev->dev);
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	rt2x00dev->csr.base = (void __iomem *)KSEG1ADDR(res->start);
+	if (!rt2x00dev->csr.base)
+		goto exit;
+
+	rt2x00dev->eeprom = kzalloc(rt2x00dev->ops->eeprom_size, GFP_KERNEL);
+	if (!rt2x00dev->eeprom)
+		goto exit;
+
+	rt2x00dev->rf = kzalloc(rt2x00dev->ops->rf_size, GFP_KERNEL);
+	if (!rt2x00dev->rf)
+		goto exit;
+
+	return 0;
+
+exit:
+	ERROR_PROBE("Failed to allocate registers.\n");
+	rt2x00soc_free_reg(rt2x00dev);
+
+	return -ENOMEM;
+}
+
+int rt2x00soc_probe(struct platform_device *pdev,
+		    const unsigned short chipset,
+		    const struct rt2x00_ops *ops)
+{
+	struct ieee80211_hw *hw;
+	struct rt2x00_dev *rt2x00dev;
+	int retval;
+
+	hw = ieee80211_alloc_hw(sizeof(struct rt2x00_dev), ops->hw);
+	if (!hw) {
+		ERROR_PROBE("Failed to allocate hardware.\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, hw);
+
+	rt2x00dev = hw->priv;
+	rt2x00dev->dev = &pdev->dev;
+	rt2x00dev->ops = ops;
+	rt2x00dev->hw = hw;
+	rt2x00dev->irq = platform_get_irq(pdev, 0);
+	rt2x00dev->name = pdev->dev.driver->name;
+
+	rt2x00_set_chip_rt(rt2x00dev, chipset);
+
+	retval = rt2x00soc_alloc_reg(rt2x00dev);
+	if (retval)
+		goto exit_free_device;
+
+	retval = rt2x00lib_probe_dev(rt2x00dev);
+	if (retval)
+		goto exit_free_reg;
+
+	return 0;
+
+exit_free_reg:
+	rt2x00soc_free_reg(rt2x00dev);
+
+exit_free_device:
+	ieee80211_free_hw(hw);
+
+	return retval;
+}
+
+int rt2x00soc_remove(struct platform_device *pdev)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	/*
+	 * Free all allocated data.
+	 */
+	rt2x00lib_remove_dev(rt2x00dev);
+	rt2x00soc_free_reg(rt2x00dev);
+	ieee80211_free_hw(hw);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_remove);
+
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	return rt2x00lib_suspend(rt2x00dev, state);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_suspend);
+
+int rt2x00soc_resume(struct platform_device *pdev)
+{
+	struct ieee80211_hw *hw = platform_get_drvdata(pdev);
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	return rt2x00lib_resume(rt2x00dev);
+}
+EXPORT_SYMBOL_GPL(rt2x00soc_resume);
+#endif /* CONFIG_PM */
+
+/*
+ * rt2x00soc module information.
+ */
+MODULE_AUTHOR(DRV_PROJECT);
+MODULE_VERSION(DRV_VERSION);
+MODULE_DESCRIPTION("rt2x00 soc library");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/rt2x00/rt2x00soc.h b/drivers/net/wireless/rt2x00/rt2x00soc.h
new file mode 100644
index 0000000..5cf114a
--- /dev/null
+++ b/drivers/net/wireless/rt2x00/rt2x00soc.h
@@ -0,0 +1,52 @@
+/*
+	Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00soc
+	Abstract: Data structures for the rt2x00soc module.
+ */
+
+#ifndef RT2X00SOC_H
+#define RT2X00SOC_H
+
+#define KSEG1ADDR(__ptr) __ptr
+
+#define __rt2x00soc_probe(__chipset, __ops) \
+static int __rt2x00soc_probe(struct platform_device *pdev) \
+{ \
+	return rt2x00soc_probe(pdev, (__chipset), (__ops)); \
+}
+
+/*
+ * SoC driver handlers.
+ */
+int rt2x00soc_probe(struct platform_device *pdev,
+		    const unsigned short chipset,
+		    const struct rt2x00_ops *ops);
+int rt2x00soc_remove(struct platform_device *pdev);
+#ifdef CONFIG_PM
+int rt2x00soc_suspend(struct platform_device *pdev, pm_message_t state);
+int rt2x00soc_resume(struct platform_device *pdev);
+#else
+#define rt2x00soc_suspend	NULL
+#define rt2x00soc_resume	NULL
+#endif /* CONFIG_PM */
+
+#endif /* RT2X00SOC_H */
diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c
index 1103256..48b0bfd 100644
--- a/drivers/net/wireless/wl12xx/wl1251_main.c
+++ b/drivers/net/wireless/wl12xx/wl1251_main.c
@@ -183,8 +183,11 @@
 		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG12)",
 			     wl->chip_id);
 		break;
-	case CHIP_ID_1251_PG10:
 	case CHIP_ID_1251_PG11:
+		wl1251_debug(DEBUG_BOOT, "chip id 0x%x (1251 PG11)",
+			     wl->chip_id);
+		break;
+	case CHIP_ID_1251_PG10:
 	default:
 		wl1251_error("unsupported chip id: 0x%x", wl->chip_id);
 		ret = -ENODEV;
@@ -1426,4 +1429,4 @@
 MODULE_DESCRIPTION("TI wl1251 Wireles LAN Driver Core");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Kalle Valo <kalle.valo@nokia.com>");
-MODULE_ALIAS("spi:wl12xx");
+MODULE_ALIAS("spi:wl1251");
diff --git a/drivers/net/wireless/wl12xx/wl1251_netlink.h b/drivers/net/wireless/wl12xx/wl1251_netlink.h
deleted file mode 100644
index ee36695..0000000
--- a/drivers/net/wireless/wl12xx/wl1251_netlink.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * This file is part of wl1251
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * Contact: Kalle Valo <kalle.valo@nokia.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __WL1251_NETLINK_H__
-#define __WL1251_NETLINK_H__
-
-int wl1251_nl_register(void);
-void wl1251_nl_unregister(void);
-
-#endif /* __WL1251_NETLINK_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c
index 17c54b5..601fe0d 100644
--- a/drivers/net/wireless/wl12xx/wl1251_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1251_rx.c
@@ -153,7 +153,7 @@
 		     beacon ? "beacon" : "");
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &status, sizeof(status));
-	ieee80211_rx(wl->hw, skb);
+	ieee80211_rx_ni(wl->hw, skb);
 }
 
 static void wl1251_rx_ack(struct wl1251 *wl)
diff --git a/drivers/net/wireless/wl12xx/wl1251_spi.c b/drivers/net/wireless/wl12xx/wl1251_spi.c
index 14eff2b..2cf8a21 100644
--- a/drivers/net/wireless/wl12xx/wl1251_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1251_spi.c
@@ -307,7 +307,7 @@
 
 static struct spi_driver wl1251_spi_driver = {
 	.driver = {
-		.name		= "wl12xx",
+		.name		= "wl1251",
 		.bus		= &spi_bus_type,
 		.owner		= THIS_MODULE,
 	},
diff --git a/drivers/net/wireless/wl12xx/wl1271.h b/drivers/net/wireless/wl12xx/wl1271.h
index 55818f9..566f152 100644
--- a/drivers/net/wireless/wl12xx/wl1271.h
+++ b/drivers/net/wireless/wl12xx/wl1271.h
@@ -32,6 +32,8 @@
 #include <linux/bitops.h>
 #include <net/mac80211.h>
 
+#include "wl1271_conf.h"
+
 #define DRIVER_NAME "wl1271"
 #define DRIVER_PREFIX DRIVER_NAME ": "
 
@@ -97,21 +99,42 @@
 	} while (0)
 
 #define WL1271_DEFAULT_RX_CONFIG (CFG_UNI_FILTER_EN |	\
-				  CFG_BSSID_FILTER_EN)
+				  CFG_BSSID_FILTER_EN | \
+				  CFG_MC_FILTER_EN)
 
 #define WL1271_DEFAULT_RX_FILTER (CFG_RX_RCTS_ACK | CFG_RX_PRSP_EN |  \
 				  CFG_RX_MGMT_EN | CFG_RX_DATA_EN |   \
 				  CFG_RX_CTL_EN | CFG_RX_BCN_EN |     \
 				  CFG_RX_AUTH_EN | CFG_RX_ASSOC_EN)
 
+#define WL1271_DEFAULT_BASIC_RATE_SET (CONF_TX_RATE_MASK_ALL)
+
 #define WL1271_FW_NAME "wl1271-fw.bin"
 #define WL1271_NVS_NAME "wl1271-nvs.bin"
 
-#define WL1271_BUSY_WORD_LEN 8
+/*
+ * Enable/disable 802.11a support for WL1273
+ */
+#undef WL1271_80211A_ENABLED
+
+/*
+ * FIXME: for the wl1271, a busy word count of 1 here will result in a more
+ * optimal SPI interface. There is some SPI bug however, causing RXS time outs
+ * with this mode occasionally on boot, so lets have three for now. A value of
+ * three should make sure, that the chipset will always be ready, though this
+ * will impact throughput and latencies slightly.
+ */
+#define WL1271_BUSY_WORD_CNT 3
+#define WL1271_BUSY_WORD_LEN (WL1271_BUSY_WORD_CNT * sizeof(u32))
 
 #define WL1271_ELP_HW_STATE_ASLEEP 0
 #define WL1271_ELP_HW_STATE_IRQ    1
 
+#define WL1271_DEFAULT_BEACON_INT  100
+#define WL1271_DEFAULT_DTIM_PERIOD 1
+
+#define ACX_TX_DESCRIPTORS         32
+
 enum wl1271_state {
 	WL1271_STATE_OFF,
 	WL1271_STATE_ON,
@@ -134,6 +157,8 @@
 struct wl1271_partition_set {
 	struct wl1271_partition mem;
 	struct wl1271_partition reg;
+	struct wl1271_partition mem2;
+	struct wl1271_partition mem3;
 };
 
 struct wl1271;
@@ -258,15 +283,15 @@
 
 /* FW status registers */
 struct wl1271_fw_status {
-	u32 intr;
+	__le32 intr;
 	u8  fw_rx_counter;
 	u8  drv_rx_counter;
 	u8  reserved;
 	u8  tx_results_counter;
-	u32 rx_pkt_descs[NUM_RX_PKT_DESC];
-	u32 tx_released_blks[NUM_TX_QUEUES];
-	u32 fw_localtime;
-	u32 padding[2];
+	__le32 rx_pkt_descs[NUM_RX_PKT_DESC];
+	__le32 tx_released_blks[NUM_TX_QUEUES];
+	__le32 fw_localtime;
+	__le32 padding[2];
 } __attribute__ ((packed));
 
 struct wl1271_rx_mem_pool_addr {
@@ -274,6 +299,15 @@
 	u32 addr_extra;
 };
 
+struct wl1271_scan {
+	u8 state;
+	u8 ssid[IW_ESSID_MAX_SIZE+1];
+	size_t ssid_len;
+	u8 active;
+	u8 high_prio;
+	u8 probe_requests;
+};
+
 struct wl1271 {
 	struct ieee80211_hw *hw;
 	bool mac80211_registered;
@@ -288,10 +322,7 @@
 	enum wl1271_state state;
 	struct mutex mutex;
 
-	int physical_mem_addr;
-	int physical_reg_addr;
-	int virtual_mem_addr;
-	int virtual_reg_addr;
+	struct wl1271_partition_set part;
 
 	struct wl1271_chip chip;
 
@@ -308,7 +339,6 @@
 	u8 bss_type;
 	u8 ssid[IW_ESSID_MAX_SIZE + 1];
 	u8 ssid_len;
-	u8 listen_int;
 	int channel;
 
 	struct wl1271_acx_mem_map *target_mem_map;
@@ -332,10 +362,14 @@
 	bool tx_queue_stopped;
 
 	struct work_struct tx_work;
-	struct work_struct filter_work;
 
 	/* Pending TX frames */
-	struct sk_buff *tx_frames[16];
+	struct sk_buff *tx_frames[ACX_TX_DESCRIPTORS];
+
+	/* Security sequence number counters */
+	u8 tx_security_last_seq;
+	u16 tx_security_seq_16;
+	u32 tx_security_seq_32;
 
 	/* FW Rx counter */
 	u32 rx_counter;
@@ -354,10 +388,17 @@
 
 	/* Are we currently scanning */
 	bool scanning;
+	struct wl1271_scan scan;
 
 	/* Our association ID */
 	u16 aid;
 
+	/* currently configured rate set */
+	u32 basic_rate_set;
+
+	/* The current band */
+	enum ieee80211_band band;
+
 	/* Default key (for WEP) */
 	u32 default_key;
 
@@ -368,6 +409,7 @@
 	bool elp;
 
 	struct completion *elp_compl;
+	struct delayed_work elp_work;
 
 	/* we can be in psm, but not in elp, we have to differentiate */
 	bool psm;
@@ -383,11 +425,20 @@
 
 	u32 buffer_32;
 	u32 buffer_cmd;
-	u8 buffer_busyword[WL1271_BUSY_WORD_LEN];
-	struct wl1271_rx_descriptor *rx_descriptor;
+	u32 buffer_busyword[WL1271_BUSY_WORD_CNT];
 
 	struct wl1271_fw_status *fw_status;
 	struct wl1271_tx_hw_res_if *tx_res_if;
+
+	struct ieee80211_vif *vif;
+
+	/* Used for a workaround to send disconnect before rejoining */
+	bool joined;
+
+	/* Current chipset configuration */
+	struct conf_drv_settings conf;
+
+	struct list_head list;
 };
 
 int wl1271_plt_start(struct wl1271 *wl);
@@ -404,4 +455,13 @@
 /* WL1271 needs a 200ms sleep after power on */
 #define WL1271_POWER_ON_SLEEP 200 /* in miliseconds */
 
+static inline bool wl1271_11a_enabled(void)
+{
+#ifdef WL1271_80211A_ENABLED
+	return true;
+#else
+	return false;
+#endif
+}
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c
index f622a40..bf5a868 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.c
@@ -34,8 +34,7 @@
 #include "wl1271_spi.h"
 #include "wl1271_ps.h"
 
-int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
-				  u8 listen_interval)
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl)
 {
 	struct acx_wake_up_condition *wake_up;
 	int ret;
@@ -48,8 +47,8 @@
 		goto out;
 	}
 
-	wake_up->wake_up_event = wake_up_event;
-	wake_up->listen_interval = listen_interval;
+	wake_up->wake_up_event = wl->conf.conn.wake_up_event;
+	wake_up->listen_interval = wl->conf.conn.listen_interval;
 
 	ret = wl1271_cmd_configure(wl, ACX_WAKE_UP_CONDITIONS,
 				   wake_up, sizeof(*wake_up));
@@ -137,7 +136,12 @@
 		goto out;
 	}
 
-	acx->current_tx_power = power * 10;
+	/*
+	 * FIXME: This is a workaround needed while we don't the correct
+	 * calibration, to avoid distortions
+	 */
+	/* acx->current_tx_power = power * 10; */
+	acx->current_tx_power = 70;
 
 	ret = wl1271_cmd_configure(wl, DOT11_CUR_TX_PWR, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -193,7 +197,7 @@
 	return 0;
 }
 
-int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time)
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl)
 {
 	struct acx_rx_msdu_lifetime *acx;
 	int ret;
@@ -206,7 +210,7 @@
 		goto out;
 	}
 
-	acx->lifetime = life_time;
+	acx->lifetime = cpu_to_le32(wl->conf.rx.rx_msdu_life_time);
 	ret = wl1271_cmd_configure(wl, DOT11_RX_MSDU_LIFE_TIME,
 				   acx, sizeof(*acx));
 	if (ret < 0) {
@@ -232,8 +236,8 @@
 		goto out;
 	}
 
-	rx_config->config_options = config;
-	rx_config->filter_options = filter;
+	rx_config->config_options = cpu_to_le32(config);
+	rx_config->filter_options = cpu_to_le32(filter);
 
 	ret = wl1271_cmd_configure(wl, ACX_RX_CFG,
 				   rx_config, sizeof(*rx_config));
@@ -260,7 +264,7 @@
 		goto out;
 	}
 
-	/* FIXME: threshold value not set */
+	pd->threshold = cpu_to_le32(wl->conf.rx.packet_detection_threshold);
 
 	ret = wl1271_cmd_configure(wl, ACX_PD_THRESHOLD, pd, sizeof(*pd));
 	if (ret < 0) {
@@ -300,7 +304,8 @@
 	return ret;
 }
 
-int wl1271_acx_group_address_tbl(struct wl1271 *wl)
+int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
+				 void *mc_list, u32 mc_list_len)
 {
 	struct acx_dot11_grp_addr_tbl *acx;
 	int ret;
@@ -314,9 +319,9 @@
 	}
 
 	/* MAC filtering */
-	acx->enabled = 0;
-	acx->num_groups = 0;
-	memset(acx->mac_table, 0, ADDRESS_GROUP_MAX_LEN);
+	acx->enabled = enable;
+	acx->num_groups = mc_list_len;
+	memcpy(acx->mac_table, mc_list, mc_list_len * ETH_ALEN);
 
 	ret = wl1271_cmd_configure(wl, DOT11_GROUP_ADDRESS_TBL,
 				   acx, sizeof(*acx));
@@ -343,8 +348,8 @@
 
 	wl1271_debug(DEBUG_ACX, "acx service period timeout");
 
-	rx_timeout->ps_poll_timeout = RX_TIMEOUT_PS_POLL_DEF;
-	rx_timeout->upsd_timeout = RX_TIMEOUT_UPSD_DEF;
+	rx_timeout->ps_poll_timeout = cpu_to_le16(wl->conf.rx.ps_poll_timeout);
+	rx_timeout->upsd_timeout = cpu_to_le16(wl->conf.rx.upsd_timeout);
 
 	ret = wl1271_cmd_configure(wl, ACX_SERVICE_PERIOD_TIMEOUT,
 				   rx_timeout, sizeof(*rx_timeout));
@@ -372,7 +377,7 @@
 		goto out;
 	}
 
-	rts->threshold = rts_threshold;
+	rts->threshold = cpu_to_le16(rts_threshold);
 
 	ret = wl1271_cmd_configure(wl, DOT11_RTS_THRESHOLD, rts, sizeof(*rts));
 	if (ret < 0) {
@@ -385,20 +390,29 @@
 	return ret;
 }
 
-int wl1271_acx_beacon_filter_opt(struct wl1271 *wl)
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter)
 {
-	struct acx_beacon_filter_option *beacon_filter;
-	int ret;
+	struct acx_beacon_filter_option *beacon_filter = NULL;
+	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx beacon filter opt");
 
+	if (enable_filter &&
+	    wl->conf.conn.bcn_filt_mode == CONF_BCN_FILT_MODE_DISABLED)
+		goto out;
+
 	beacon_filter = kzalloc(sizeof(*beacon_filter), GFP_KERNEL);
 	if (!beacon_filter) {
 		ret = -ENOMEM;
 		goto out;
 	}
 
-	beacon_filter->enable = 0;
+	beacon_filter->enable = enable_filter;
+
+	/*
+	 * When set to zero, and the filter is enabled, beacons
+	 * without the unicast TIM bit set are dropped.
+	 */
 	beacon_filter->max_num_beacons = 0;
 
 	ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_OPT,
@@ -416,7 +430,9 @@
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl)
 {
 	struct acx_beacon_filter_ie_table *ie_table;
+	int i, idx = 0;
 	int ret;
+	bool vendor_spec = false;
 
 	wl1271_debug(DEBUG_ACX, "acx beacon filter table");
 
@@ -426,8 +442,32 @@
 		goto out;
 	}
 
+	/* configure default beacon pass-through rules */
 	ie_table->num_ie = 0;
-	memset(ie_table->table, 0, BEACON_FILTER_TABLE_MAX_SIZE);
+	for (i = 0; i < wl->conf.conn.bcn_filt_ie_count; i++) {
+		struct conf_bcn_filt_rule *r = &(wl->conf.conn.bcn_filt_ie[i]);
+		ie_table->table[idx++] = r->ie;
+		ie_table->table[idx++] = r->rule;
+
+		if (r->ie == WLAN_EID_VENDOR_SPECIFIC) {
+			/* only one vendor specific ie allowed */
+			if (vendor_spec)
+				continue;
+
+			/* for vendor specific rules configure the
+			   additional fields */
+			memcpy(&(ie_table->table[idx]), r->oui,
+			       CONF_BCN_IE_OUI_LEN);
+			idx += CONF_BCN_IE_OUI_LEN;
+			ie_table->table[idx++] = r->type;
+			memcpy(&(ie_table->table[idx]), r->version,
+			       CONF_BCN_IE_VER_LEN);
+			idx += CONF_BCN_IE_VER_LEN;
+			vendor_spec = true;
+		}
+
+		ie_table->num_ie++;
+	}
 
 	ret = wl1271_cmd_configure(wl, ACX_BEACON_FILTER_TABLE,
 				   ie_table, sizeof(*ie_table));
@@ -441,6 +481,36 @@
 	return ret;
 }
 
+int wl1271_acx_conn_monit_params(struct wl1271 *wl)
+{
+	struct acx_conn_monit_params *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx connection monitor parameters");
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->synch_fail_thold = cpu_to_le32(wl->conf.conn.synch_fail_thold);
+	acx->bss_lose_timeout = cpu_to_le32(wl->conf.conn.bss_lose_timeout);
+
+	ret = wl1271_cmd_configure(wl, ACX_CONN_MONIT_PARAMS,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("failed to set connection monitor "
+			       "parameters: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+
 int wl1271_acx_sg_enable(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex *pta;
@@ -470,6 +540,7 @@
 int wl1271_acx_sg_cfg(struct wl1271 *wl)
 {
 	struct acx_bt_wlan_coex_param *param;
+	struct conf_sg_settings *c = &wl->conf.sg;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "acx sg cfg");
@@ -481,34 +552,19 @@
 	}
 
 	/* BT-WLAN coext parameters */
-	param->min_rate = RATE_INDEX_24MBPS;
-	param->bt_hp_max_time = PTA_BT_HP_MAXTIME_DEF;
-	param->wlan_hp_max_time = PTA_WLAN_HP_MAX_TIME_DEF;
-	param->sense_disable_timer = PTA_SENSE_DISABLE_TIMER_DEF;
-	param->rx_time_bt_hp = PTA_PROTECTIVE_RX_TIME_DEF;
-	param->tx_time_bt_hp = PTA_PROTECTIVE_TX_TIME_DEF;
-	param->rx_time_bt_hp_fast = PTA_PROTECTIVE_RX_TIME_FAST_DEF;
-	param->tx_time_bt_hp_fast = PTA_PROTECTIVE_TX_TIME_FAST_DEF;
-	param->wlan_cycle_fast = PTA_CYCLE_TIME_FAST_DEF;
-	param->bt_anti_starvation_period = PTA_ANTI_STARVE_PERIOD_DEF;
-	param->next_bt_lp_packet = PTA_TIMEOUT_NEXT_BT_LP_PACKET_DEF;
-	param->wake_up_beacon = PTA_TIME_BEFORE_BEACON_DEF;
-	param->hp_dm_max_guard_time = PTA_HPDM_MAX_TIME_DEF;
-	param->next_wlan_packet = PTA_TIME_OUT_NEXT_WLAN_DEF;
-	param->antenna_type = PTA_ANTENNA_TYPE_DEF;
-	param->signal_type = PTA_SIGNALING_TYPE_DEF;
-	param->afh_leverage_on = PTA_AFH_LEVERAGE_ON_DEF;
-	param->quiet_cycle_num = PTA_NUMBER_QUIET_CYCLE_DEF;
-	param->max_cts = PTA_MAX_NUM_CTS_DEF;
-	param->wlan_packets_num = PTA_NUMBER_OF_WLAN_PACKETS_DEF;
-	param->bt_packets_num = PTA_NUMBER_OF_BT_PACKETS_DEF;
-	param->missed_rx_avalanche = PTA_RX_FOR_AVALANCHE_DEF;
-	param->wlan_elp_hp = PTA_ELP_HP_DEF;
-	param->bt_anti_starvation_cycles = PTA_ANTI_STARVE_NUM_CYCLE_DEF;
-	param->ack_mode_dual_ant = PTA_ACK_MODE_DEF;
-	param->pa_sd_enable = PTA_ALLOW_PA_SD_DEF;
-	param->pta_auto_mode_enable = PTA_AUTO_MODE_NO_CTS_DEF;
-	param->bt_hp_respected_num = PTA_BT_HP_RESPECTED_DEF;
+	param->per_threshold = cpu_to_le32(c->per_threshold);
+	param->max_scan_compensation_time =
+		cpu_to_le32(c->max_scan_compensation_time);
+	param->nfs_sample_interval = cpu_to_le16(c->nfs_sample_interval);
+	param->load_ratio = c->load_ratio;
+	param->auto_ps_mode = c->auto_ps_mode;
+	param->probe_req_compensation = c->probe_req_compensation;
+	param->scan_window_compensation = c->scan_window_compensation;
+	param->antenna_config = c->antenna_config;
+	param->beacon_miss_threshold = c->beacon_miss_threshold;
+	param->rate_adaptation_threshold =
+		cpu_to_le32(c->rate_adaptation_threshold);
+	param->rate_adaptation_snr = c->rate_adaptation_snr;
 
 	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));
 	if (ret < 0) {
@@ -534,8 +590,8 @@
 		goto out;
 	}
 
-	detection->rx_cca_threshold = CCA_THRSH_DISABLE_ENERGY_D;
-	detection->tx_energy_detection = 0;
+	detection->rx_cca_threshold = cpu_to_le16(wl->conf.rx.rx_cca_threshold);
+	detection->tx_energy_detection = wl->conf.tx.tx_energy_detection;
 
 	ret = wl1271_cmd_configure(wl, ACX_CCA_THRESHOLD,
 				   detection, sizeof(*detection));
@@ -562,10 +618,10 @@
 		goto out;
 	}
 
-	bb->beacon_rx_timeout = BCN_RX_TIMEOUT_DEF_VALUE;
-	bb->broadcast_timeout = BROADCAST_RX_TIMEOUT_DEF_VALUE;
-	bb->rx_broadcast_in_ps = RX_BROADCAST_IN_PS_DEF_VALUE;
-	bb->ps_poll_threshold = CONSECUTIVE_PS_POLL_FAILURE_DEF;
+	bb->beacon_rx_timeout = cpu_to_le16(wl->conf.conn.beacon_rx_timeout);
+	bb->broadcast_timeout = cpu_to_le16(wl->conf.conn.broadcast_timeout);
+	bb->rx_broadcast_in_ps = wl->conf.conn.rx_broadcast_in_ps;
+	bb->ps_poll_threshold = wl->conf.conn.ps_poll_threshold;
 
 	ret = wl1271_cmd_configure(wl, ACX_BCN_DTIM_OPTIONS, bb, sizeof(*bb));
 	if (ret < 0) {
@@ -591,7 +647,7 @@
 		goto out;
 	}
 
-	acx_aid->aid = aid;
+	acx_aid->aid = cpu_to_le16(aid);
 
 	ret = wl1271_cmd_configure(wl, ACX_AID, acx_aid, sizeof(*acx_aid));
 	if (ret < 0) {
@@ -618,9 +674,8 @@
 	}
 
 	/* high event mask is unused */
-	mask->high_event_mask = 0xffffffff;
-
-	mask->event_mask = event_mask;
+	mask->high_event_mask = cpu_to_le32(0xffffffff);
+	mask->event_mask = cpu_to_le32(event_mask);
 
 	ret = wl1271_cmd_configure(wl, ACX_EVENT_MBOX_MASK,
 				   mask, sizeof(*mask));
@@ -703,9 +758,10 @@
 	return 0;
 }
 
-int wl1271_acx_rate_policies(struct wl1271 *wl)
+int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates)
 {
 	struct acx_rate_policy *acx;
+	struct conf_tx_rate_class *c = &wl->conf.tx.rc_conf;
 	int ret = 0;
 
 	wl1271_debug(DEBUG_ACX, "acx rate policies");
@@ -718,11 +774,11 @@
 	}
 
 	/* configure one default (one-size-fits-all) rate class */
-	acx->rate_class_cnt = 1;
-	acx->rate_class[0].enabled_rates = ACX_RATE_MASK_ALL;
-	acx->rate_class[0].short_retry_limit = ACX_RATE_RETRY_LIMIT;
-	acx->rate_class[0].long_retry_limit = ACX_RATE_RETRY_LIMIT;
-	acx->rate_class[0].aflags = 0;
+	acx->rate_class_cnt = cpu_to_le32(1);
+	acx->rate_class[0].enabled_rates = cpu_to_le32(enabled_rates);
+	acx->rate_class[0].short_retry_limit = c->short_retry_limit;
+	acx->rate_class[0].long_retry_limit = c->long_retry_limit;
+	acx->rate_class[0].aflags = c->aflags;
 
 	ret = wl1271_cmd_configure(wl, ACX_RATE_POLICY, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -749,22 +805,14 @@
 		goto out;
 	}
 
-	/*
-	 * FIXME: Configure each AC with appropriate values (most suitable
-	 * values will probably be different for each AC.
-	 */
-	for (i = 0; i < WL1271_ACX_AC_COUNT; i++) {
-		acx->ac = i;
-
-		/*
-		 * FIXME: The following default values originate from
-		 * the TI reference driver. What do they mean?
-		 */
-		acx->cw_min = 15;
-		acx->cw_max = 63;
-		acx->aifsn = 3;
+	for (i = 0; i < wl->conf.tx.ac_conf_count; i++) {
+		struct conf_tx_ac_category *c = &(wl->conf.tx.ac_conf[i]);
+		acx->ac = c->ac;
+		acx->cw_min = c->cw_min;
+		acx->cw_max = cpu_to_le16(c->cw_max);
+		acx->aifsn = c->aifsn;
 		acx->reserved = 0;
-		acx->tx_op_limit = 0;
+		acx->tx_op_limit = cpu_to_le16(c->tx_op_limit);
 
 		ret = wl1271_cmd_configure(wl, ACX_AC_CFG, acx, sizeof(*acx));
 		if (ret < 0) {
@@ -793,12 +841,15 @@
 		goto out;
 	}
 
-	/* FIXME: configure each TID with a different AC reference */
-	for (i = 0; i < WL1271_ACX_TID_COUNT; i++) {
-		acx->queue_id = i;
-		acx->tsid = WL1271_ACX_AC_BE;
-		acx->ps_scheme = WL1271_ACX_PS_SCHEME_LEGACY;
-		acx->ack_policy = WL1271_ACX_ACK_POLICY_LEGACY;
+	for (i = 0; i < wl->conf.tx.tid_conf_count; i++) {
+		struct conf_tx_tid *c = &(wl->conf.tx.tid_conf[i]);
+		acx->queue_id = c->queue_id;
+		acx->channel_type = c->channel_type;
+		acx->tsid = c->tsid;
+		acx->ps_scheme = c->ps_scheme;
+		acx->ack_policy = c->ack_policy;
+		acx->apsd_conf[0] = cpu_to_le32(c->apsd_conf[0]);
+		acx->apsd_conf[1] = cpu_to_le32(c->apsd_conf[1]);
 
 		ret = wl1271_cmd_configure(wl, ACX_TID_CFG, acx, sizeof(*acx));
 		if (ret < 0) {
@@ -826,7 +877,7 @@
 		goto out;
 	}
 
-	acx->frag_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
+	acx->frag_threshold = cpu_to_le16(wl->conf.tx.frag_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_FRAG_CFG, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of frag threshold failed: %d", ret);
@@ -852,8 +903,8 @@
 		goto out;
 	}
 
-	acx->tx_compl_timeout = WL1271_ACX_TX_COMPL_TIMEOUT;
-	acx->tx_compl_threshold = WL1271_ACX_TX_COMPL_THRESHOLD;
+	acx->tx_compl_timeout = cpu_to_le16(wl->conf.tx.tx_compl_timeout);
+	acx->tx_compl_threshold = cpu_to_le16(wl->conf.tx.tx_compl_threshold);
 	ret = wl1271_cmd_configure(wl, ACX_TX_CONFIG_OPT, acx, sizeof(*acx));
 	if (ret < 0) {
 		wl1271_warning("Setting of tx options failed: %d", ret);
@@ -879,11 +930,11 @@
 	}
 
 	/* memory config */
-	mem_conf->num_stations = cpu_to_le16(DEFAULT_NUM_STATIONS);
+	mem_conf->num_stations = DEFAULT_NUM_STATIONS;
 	mem_conf->rx_mem_block_num = ACX_RX_MEM_BLOCKS;
 	mem_conf->tx_min_mem_block_num = ACX_TX_MIN_MEM_BLOCKS;
 	mem_conf->num_ssid_profiles = ACX_NUM_SSID_PROFILES;
-	mem_conf->total_tx_descriptors = ACX_TX_DESCRIPTORS;
+	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
 				   sizeof(*mem_conf));
@@ -906,7 +957,7 @@
 		return ret;
 
 	wl->target_mem_map = kzalloc(sizeof(struct wl1271_acx_mem_map),
-					  GFP_KERNEL);
+				     GFP_KERNEL);
 	if (!wl->target_mem_map) {
 		wl1271_error("couldn't allocate target memory map");
 		return -ENOMEM;
@@ -923,7 +974,8 @@
 	}
 
 	/* initialize TX block book keeping */
-	wl->tx_blocks_available = wl->target_mem_map->num_tx_mem_blocks;
+	wl->tx_blocks_available =
+		le32_to_cpu(wl->target_mem_map->num_tx_mem_blocks);
 	wl1271_debug(DEBUG_TX, "available tx blocks: %d",
 		     wl->tx_blocks_available);
 
@@ -943,10 +995,10 @@
 		goto out;
 	}
 
-	rx_conf->threshold = WL1271_RX_INTR_THRESHOLD_DEF;
-	rx_conf->timeout = WL1271_RX_INTR_TIMEOUT_DEF;
-	rx_conf->mblk_threshold = USHORT_MAX; /* Disabled */
-	rx_conf->queue_type = RX_QUEUE_TYPE_RX_LOW_PRIORITY;
+	rx_conf->threshold = cpu_to_le16(wl->conf.rx.irq_pkt_threshold);
+	rx_conf->timeout = cpu_to_le16(wl->conf.rx.irq_timeout);
+	rx_conf->mblk_threshold = cpu_to_le16(wl->conf.rx.irq_blk_threshold);
+	rx_conf->queue_type = wl->conf.rx.queue_type;
 
 	ret = wl1271_cmd_configure(wl, ACX_RX_CONFIG_OPT, rx_conf,
 				   sizeof(*rx_conf));
@@ -959,3 +1011,124 @@
 	kfree(rx_conf);
 	return ret;
 }
+
+int wl1271_acx_smart_reflex(struct wl1271 *wl)
+{
+	struct acx_smart_reflex_state *sr_state = NULL;
+	struct acx_smart_reflex_config_params *sr_param = NULL;
+	int i, ret;
+
+	wl1271_debug(DEBUG_ACX, "acx smart reflex");
+
+	sr_param = kzalloc(sizeof(*sr_param), GFP_KERNEL);
+	if (!sr_param) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
+		struct conf_mart_reflex_err_table *e =
+			&(wl->conf.init.sr_err_tbl[i]);
+
+		sr_param->error_table[i].len = e->len;
+		sr_param->error_table[i].upper_limit = e->upper_limit;
+		memcpy(sr_param->error_table[i].values, e->values, e->len);
+	}
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
+				   sr_param, sizeof(*sr_param));
+	if (ret < 0) {
+		wl1271_warning("failed to set smart reflex params: %d", ret);
+		goto out;
+	}
+
+	sr_state = kzalloc(sizeof(*sr_state), GFP_KERNEL);
+	if (!sr_state) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	/* enable smart reflex */
+	sr_state->enable = wl->conf.init.sr_enable;
+
+	ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
+				   sr_state, sizeof(*sr_state));
+	if (ret < 0) {
+		wl1271_warning("failed to set smart reflex params: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(sr_state);
+	kfree(sr_param);
+	return ret;
+
+}
+
+int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable)
+{
+	struct wl1271_acx_bet_enable *acx = NULL;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_ACX, "acx bet enable");
+
+	if (enable && wl->conf.conn.bet_enable == CONF_BET_MODE_DISABLE)
+		goto out;
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->enable = enable ? CONF_BET_MODE_ENABLE : CONF_BET_MODE_DISABLE;
+	acx->max_consecutive = wl->conf.conn.bet_max_consecutive;
+
+	ret = wl1271_cmd_configure(wl, ACX_BET_ENABLE, acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("acx bet enable failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
+
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
+			     u8 version)
+{
+	struct wl1271_acx_arp_filter *acx;
+	int ret;
+
+	wl1271_debug(DEBUG_ACX, "acx arp ip filter, enable: %d", enable);
+
+	acx = kzalloc(sizeof(*acx), GFP_KERNEL);
+	if (!acx) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	acx->version = version;
+	acx->enable = enable;
+
+	if (enable == true) {
+		if (version == ACX_IPV4_VERSION)
+			memcpy(acx->address, address, ACX_IPV4_ADDR_SIZE);
+		else if (version == ACX_IPV6_VERSION)
+			memcpy(acx->address, address, sizeof(acx->address));
+		else
+			wl1271_error("Invalid IP version");
+	}
+
+	ret = wl1271_cmd_configure(wl, ACX_ARP_IP_FILTER,
+				   acx, sizeof(*acx));
+	if (ret < 0) {
+		wl1271_warning("failed to set arp ip filter: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(acx);
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h
index 9068daa..2ce0a81 100644
--- a/drivers/net/wireless/wl12xx/wl1271_acx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_acx.h
@@ -61,8 +61,9 @@
 					    WL1271_ACX_INTR_HW_AVAILABLE  | \
 					    WL1271_ACX_INTR_DATA)
 
-#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_EVENT_A |	\
-					    WL1271_ACX_INTR_EVENT_B | \
+#define WL1271_INTR_MASK                   (WL1271_ACX_INTR_EVENT_A      | \
+					    WL1271_ACX_INTR_EVENT_B      | \
+					    WL1271_ACX_INTR_HW_AVAILABLE | \
 					    WL1271_ACX_INTR_DATA)
 
 /* Target's information element */
@@ -70,11 +71,11 @@
 	struct wl1271_cmd_header cmd;
 
 	/* acx (or information element) header */
-	u16 id;
+	__le16 id;
 
 	/* payload length (not including headers */
-	u16 len;
-};
+	__le16 len;
+} __attribute__ ((packed));
 
 struct acx_error_counter {
 	struct acx_header header;
@@ -82,21 +83,21 @@
 	/* The number of PLCP errors since the last time this */
 	/* information element was interrogated. This field is */
 	/* automatically cleared when it is interrogated.*/
-	u32 PLCP_error;
+	__le32 PLCP_error;
 
 	/* The number of FCS errors since the last time this */
 	/* information element was interrogated. This field is */
 	/* automatically cleared when it is interrogated.*/
-	u32 FCS_error;
+	__le32 FCS_error;
 
 	/* The number of MPDUs without PLCP header errors received*/
 	/* since the last time this information element was interrogated. */
 	/* This field is automatically cleared when it is interrogated.*/
-	u32 valid_frame;
+	__le32 valid_frame;
 
 	/* the number of missed sequence numbers in the squentially */
 	/* values of frames seq numbers */
-	u32 seq_num_miss;
+	__le32 seq_num_miss;
 } __attribute__ ((packed));
 
 struct acx_revision {
@@ -125,7 +126,7 @@
 	 *              (1 = first spin, 2 = second spin, and so on).
 	 * bits 24 - 31: Chip ID - The WiLink chip ID.
 	 */
-	u32 hw_version;
+	__le32 hw_version;
 } __attribute__ ((packed));
 
 enum wl1271_psm_mode {
@@ -170,7 +171,6 @@
 #define  DP_RX_PACKET_RING_CHUNK_NUM 2
 #define  DP_TX_PACKET_RING_CHUNK_NUM 2
 #define  DP_TX_COMPLETE_TIME_OUT 20
-#define  FW_TX_CMPLT_BLOCK_SIZE 16
 
 #define TX_MSDU_LIFETIME_MIN       0
 #define TX_MSDU_LIFETIME_MAX       3000
@@ -186,7 +186,7 @@
 	 * The maximum amount of time, in TU, before the
 	 * firmware discards the MSDU.
 	 */
-	u32 lifetime;
+	__le32 lifetime;
 } __attribute__ ((packed));
 
 /*
@@ -273,14 +273,14 @@
 struct acx_rx_config {
 	struct acx_header header;
 
-	u32 config_options;
-	u32 filter_options;
+	__le32 config_options;
+	__le32 filter_options;
 } __attribute__ ((packed));
 
 struct acx_packet_detection {
 	struct acx_header header;
 
-	u32 threshold;
+	__le32 threshold;
 } __attribute__ ((packed));
 
 
@@ -302,8 +302,8 @@
 } __attribute__ ((packed));
 
 
-#define ADDRESS_GROUP_MAX	(8)
-#define ADDRESS_GROUP_MAX_LEN	(ETH_ALEN * ADDRESS_GROUP_MAX)
+#define ACX_MC_ADDRESS_GROUP_MAX	(8)
+#define ADDRESS_GROUP_MAX_LEN	        (ETH_ALEN * ACX_MC_ADDRESS_GROUP_MAX)
 
 struct acx_dot11_grp_addr_tbl {
 	struct acx_header header;
@@ -314,40 +314,17 @@
 	u8 mac_table[ADDRESS_GROUP_MAX_LEN];
 } __attribute__ ((packed));
 
-
-#define  RX_TIMEOUT_PS_POLL_MIN    0
-#define  RX_TIMEOUT_PS_POLL_MAX    (200000)
-#define  RX_TIMEOUT_PS_POLL_DEF    (15)
-#define  RX_TIMEOUT_UPSD_MIN       0
-#define  RX_TIMEOUT_UPSD_MAX       (200000)
-#define  RX_TIMEOUT_UPSD_DEF       (15)
-
 struct acx_rx_timeout {
 	struct acx_header header;
 
-	/*
-	 * The longest time the STA will wait to receive
-	 * traffic from the AP after a PS-poll has been
-	 * transmitted.
-	 */
-	u16 ps_poll_timeout;
-
-	/*
-	 * The longest time the STA will wait to receive
-	 * traffic from the AP after a frame has been sent
-	 * from an UPSD enabled queue.
-	 */
-	u16 upsd_timeout;
+	__le16 ps_poll_timeout;
+	__le16 upsd_timeout;
 } __attribute__ ((packed));
 
-#define RTS_THRESHOLD_MIN              0
-#define RTS_THRESHOLD_MAX              4096
-#define RTS_THRESHOLD_DEF              2347
-
 struct acx_rts_threshold {
 	struct acx_header header;
 
-	u16 threshold;
+	__le16 threshold;
 	u8 pad[2];
 } __attribute__ ((packed));
 
@@ -408,6 +385,13 @@
 	u8 pad[3];
 } __attribute__ ((packed));
 
+struct acx_conn_monit_params {
+       struct acx_header header;
+
+       __le32 synch_fail_thold; /* number of beacons missed */
+       __le32 bss_lose_timeout; /* number of TU's from synch fail */
+} __attribute__ ((packed));
+
 enum {
 	SG_ENABLE = 0,
 	SG_DISABLE,
@@ -431,6 +415,25 @@
 	u8 pad[3];
 } __attribute__ ((packed));
 
+struct acx_smart_reflex_state {
+	struct acx_header header;
+
+	u8 enable;
+	u8 padding[3];
+} __attribute__ ((packed));
+
+struct smart_reflex_err_table {
+	u8 len;
+	s8 upper_limit;
+	s8 values[14];
+} __attribute__ ((packed));
+
+struct acx_smart_reflex_config_params {
+	struct acx_header header;
+
+	struct smart_reflex_err_table error_table[3];
+} __attribute__ ((packed));
+
 #define PTA_ANTENNA_TYPE_DEF		  (0)
 #define PTA_BT_HP_MAXTIME_DEF		  (2000)
 #define PTA_WLAN_HP_MAX_TIME_DEF	  (5000)
@@ -463,150 +466,34 @@
 struct acx_bt_wlan_coex_param {
 	struct acx_header header;
 
-	/*
-	 * The minimum rate of a received WLAN packet in the STA,
-	 * during protective mode, of which a new BT-HP request
-	 * during this Rx will always be respected and gain the antenna.
-	 */
-	u32 min_rate;
-
-	/* Max time the BT HP will be respected. */
-	u16 bt_hp_max_time;
-
-	/* Max time the WLAN HP will be respected. */
-	u16 wlan_hp_max_time;
-
-	/*
-	 * The time between the last BT activity
-	 * and the moment when the sense mode returns
-	 * to SENSE_INACTIVE.
-	 */
-	u16 sense_disable_timer;
-
-	/* Time before the next BT HP instance */
-	u16 rx_time_bt_hp;
-	u16 tx_time_bt_hp;
-
-	/* range: 10-20000    default: 1500 */
-	u16 rx_time_bt_hp_fast;
-	u16 tx_time_bt_hp_fast;
-
-	/* range: 2000-65535  default: 8700 */
-	u16 wlan_cycle_fast;
-
-	/* range: 0 - 15000 (Msec) default: 1000 */
-	u16 bt_anti_starvation_period;
-
-	/* range 400-10000(Usec) default: 3000 */
-	u16 next_bt_lp_packet;
-
-	/* Deafult: worst case for BT DH5 traffic */
-	u16 wake_up_beacon;
-
-	/* range: 0-50000(Usec) default: 1050 */
-	u16 hp_dm_max_guard_time;
-
-	/*
-	 * This is to prevent both BT & WLAN antenna
-	 * starvation.
-	 * Range: 100-50000(Usec) default:2550
-	 */
-	u16 next_wlan_packet;
-
-	/* 0 -> shared antenna */
-	u8 antenna_type;
-
-	/*
-	 * 0 -> TI legacy
-	 * 1 -> Palau
-	 */
-	u8 signal_type;
-
-	/*
-	 * BT AFH status
-	 * 0 -> no AFH
-	 * 1 -> from dedicated GPIO
-	 * 2 -> AFH on (from host)
-	 */
-	u8 afh_leverage_on;
-
-	/*
-	 * The number of cycles during which no
-	 * TX will be sent after 1 cycle of RX
-	 * transaction in protective mode
-	 */
-	u8 quiet_cycle_num;
-
-	/*
-	 * The maximum number of CTSs that will
-	 * be sent for receiving RX packet in
-	 * protective mode
-	 */
-	u8 max_cts;
-
-	/*
-	 * The number of WLAN packets
-	 * transferred in common mode before
-	 * switching to BT.
-	 */
-	u8 wlan_packets_num;
-
-	/*
-	 * The number of BT packets
-	 * transferred in common mode before
-	 * switching to WLAN.
-	 */
-	u8 bt_packets_num;
-
-	/* range: 1-255  default: 5 */
-	u8 missed_rx_avalanche;
-
-	/* range: 0-1    default: 1 */
-	u8 wlan_elp_hp;
-
-	/* range: 0 - 15  default: 4 */
-	u8 bt_anti_starvation_cycles;
-
-	u8 ack_mode_dual_ant;
-
-	/*
-	 * Allow PA_SD assertion/de-assertion
-	 * during enabled BT activity.
-	 */
-	u8 pa_sd_enable;
-
-	/*
-	 * Enable/Disable PTA in auto mode:
-	 * Support Both Active & P.S modes
-	 */
-	u8 pta_auto_mode_enable;
-
-	/* range: 0 - 20  default: 1 */
-	u8 bt_hp_respected_num;
+	__le32 per_threshold;
+	__le32 max_scan_compensation_time;
+	__le16 nfs_sample_interval;
+	u8 load_ratio;
+	u8 auto_ps_mode;
+	u8 probe_req_compensation;
+	u8 scan_window_compensation;
+	u8 antenna_config;
+	u8 beacon_miss_threshold;
+	__le32 rate_adaptation_threshold;
+	s8 rate_adaptation_snr;
+	u8 padding[3];
 } __attribute__ ((packed));
 
-#define CCA_THRSH_ENABLE_ENERGY_D       0x140A
-#define CCA_THRSH_DISABLE_ENERGY_D      0xFFEF
-
 struct acx_energy_detection {
 	struct acx_header header;
 
 	/* The RX Clear Channel Assessment threshold in the PHY */
-	u16 rx_cca_threshold;
+	__le16 rx_cca_threshold;
 	u8 tx_energy_detection;
 	u8 pad;
 } __attribute__ ((packed));
 
-#define BCN_RX_TIMEOUT_DEF_VALUE        10000
-#define BROADCAST_RX_TIMEOUT_DEF_VALUE  20000
-#define RX_BROADCAST_IN_PS_DEF_VALUE    1
-#define CONSECUTIVE_PS_POLL_FAILURE_DEF 4
-
 struct acx_beacon_broadcast {
 	struct acx_header header;
 
-	u16 beacon_rx_timeout;
-	u16 broadcast_timeout;
+	__le16 beacon_rx_timeout;
+	__le16 broadcast_timeout;
 
 	/* Enables receiving of broadcast packets in PS mode */
 	u8 rx_broadcast_in_ps;
@@ -619,8 +506,8 @@
 struct acx_event_mask {
 	struct acx_header header;
 
-	u32 event_mask;
-	u32 high_event_mask; /* Unused */
+	__le32 event_mask;
+	__le32 high_event_mask; /* Unused */
 } __attribute__ ((packed));
 
 #define CFG_RX_FCS		BIT(2)
@@ -657,11 +544,15 @@
 #define SCAN_TRIGGERED		BIT(2)
 #define SCAN_PRIORITY_HIGH	BIT(3)
 
+/* When set, disable HW encryption */
+#define DF_ENCRYPTION_DISABLE      0x01
+#define DF_SNIFF_MODE_ENABLE       0x80
+
 struct acx_feature_config {
 	struct acx_header header;
 
-	u32 options;
-	u32 data_flow_options;
+	__le32 options;
+	__le32 data_flow_options;
 } __attribute__ ((packed));
 
 struct acx_current_tx_power {
@@ -671,14 +562,6 @@
 	u8  padding[3];
 } __attribute__ ((packed));
 
-enum acx_wake_up_event {
-	WAKE_UP_EVENT_BEACON_BITMAP	= 0x01, /* Wake on every Beacon*/
-	WAKE_UP_EVENT_DTIM_BITMAP	= 0x02,	/* Wake on every DTIM*/
-	WAKE_UP_EVENT_N_DTIM_BITMAP	= 0x04, /* Wake on every Nth DTIM */
-	WAKE_UP_EVENT_N_BEACONS_BITMAP	= 0x08, /* Wake on every Nth Beacon */
-	WAKE_UP_EVENT_BITS_MASK		= 0x0F
-};
-
 struct acx_wake_up_condition {
 	struct acx_header header;
 
@@ -693,7 +576,7 @@
 	/*
 	 * To be set when associated with an AP.
 	 */
-	u16 aid;
+	__le16 aid;
 	u8 pad[2];
 } __attribute__ ((packed));
 
@@ -725,152 +608,152 @@
 } __attribute__ ((packed));
 
 struct acx_tx_statistics {
-	u32 internal_desc_overflow;
+	__le32 internal_desc_overflow;
 }  __attribute__ ((packed));
 
 struct acx_rx_statistics {
-	u32 out_of_mem;
-	u32 hdr_overflow;
-	u32 hw_stuck;
-	u32 dropped;
-	u32 fcs_err;
-	u32 xfr_hint_trig;
-	u32 path_reset;
-	u32 reset_counter;
+	__le32 out_of_mem;
+	__le32 hdr_overflow;
+	__le32 hw_stuck;
+	__le32 dropped;
+	__le32 fcs_err;
+	__le32 xfr_hint_trig;
+	__le32 path_reset;
+	__le32 reset_counter;
 } __attribute__ ((packed));
 
 struct acx_dma_statistics {
-	u32 rx_requested;
-	u32 rx_errors;
-	u32 tx_requested;
-	u32 tx_errors;
+	__le32 rx_requested;
+	__le32 rx_errors;
+	__le32 tx_requested;
+	__le32 tx_errors;
 }  __attribute__ ((packed));
 
 struct acx_isr_statistics {
 	/* host command complete */
-	u32 cmd_cmplt;
+	__le32 cmd_cmplt;
 
 	/* fiqisr() */
-	u32 fiqs;
+	__le32 fiqs;
 
 	/* (INT_STS_ND & INT_TRIG_RX_HEADER) */
-	u32 rx_headers;
+	__le32 rx_headers;
 
 	/* (INT_STS_ND & INT_TRIG_RX_CMPLT) */
-	u32 rx_completes;
+	__le32 rx_completes;
 
 	/* (INT_STS_ND & INT_TRIG_NO_RX_BUF) */
-	u32 rx_mem_overflow;
+	__le32 rx_mem_overflow;
 
 	/* (INT_STS_ND & INT_TRIG_S_RX_RDY) */
-	u32 rx_rdys;
+	__le32 rx_rdys;
 
 	/* irqisr() */
-	u32 irqs;
+	__le32 irqs;
 
 	/* (INT_STS_ND & INT_TRIG_TX_PROC) */
-	u32 tx_procs;
+	__le32 tx_procs;
 
 	/* (INT_STS_ND & INT_TRIG_DECRYPT_DONE) */
-	u32 decrypt_done;
+	__le32 decrypt_done;
 
 	/* (INT_STS_ND & INT_TRIG_DMA0) */
-	u32 dma0_done;
+	__le32 dma0_done;
 
 	/* (INT_STS_ND & INT_TRIG_DMA1) */
-	u32 dma1_done;
+	__le32 dma1_done;
 
 	/* (INT_STS_ND & INT_TRIG_TX_EXC_CMPLT) */
-	u32 tx_exch_complete;
+	__le32 tx_exch_complete;
 
 	/* (INT_STS_ND & INT_TRIG_COMMAND) */
-	u32 commands;
+	__le32 commands;
 
 	/* (INT_STS_ND & INT_TRIG_RX_PROC) */
-	u32 rx_procs;
+	__le32 rx_procs;
 
 	/* (INT_STS_ND & INT_TRIG_PM_802) */
-	u32 hw_pm_mode_changes;
+	__le32 hw_pm_mode_changes;
 
 	/* (INT_STS_ND & INT_TRIG_ACKNOWLEDGE) */
-	u32 host_acknowledges;
+	__le32 host_acknowledges;
 
 	/* (INT_STS_ND & INT_TRIG_PM_PCI) */
-	u32 pci_pm;
+	__le32 pci_pm;
 
 	/* (INT_STS_ND & INT_TRIG_ACM_WAKEUP) */
-	u32 wakeups;
+	__le32 wakeups;
 
 	/* (INT_STS_ND & INT_TRIG_LOW_RSSI) */
-	u32 low_rssi;
+	__le32 low_rssi;
 } __attribute__ ((packed));
 
 struct acx_wep_statistics {
 	/* WEP address keys configured */
-	u32 addr_key_count;
+	__le32 addr_key_count;
 
 	/* default keys configured */
-	u32 default_key_count;
+	__le32 default_key_count;
 
-	u32 reserved;
+	__le32 reserved;
 
 	/* number of times that WEP key not found on lookup */
-	u32 key_not_found;
+	__le32 key_not_found;
 
 	/* number of times that WEP key decryption failed */
-	u32 decrypt_fail;
+	__le32 decrypt_fail;
 
 	/* WEP packets decrypted */
-	u32 packets;
+	__le32 packets;
 
 	/* WEP decrypt interrupts */
-	u32 interrupt;
+	__le32 interrupt;
 } __attribute__ ((packed));
 
 #define ACX_MISSED_BEACONS_SPREAD 10
 
 struct acx_pwr_statistics {
 	/* the amount of enters into power save mode (both PD & ELP) */
-	u32 ps_enter;
+	__le32 ps_enter;
 
 	/* the amount of enters into ELP mode */
-	u32 elp_enter;
+	__le32 elp_enter;
 
 	/* the amount of missing beacon interrupts to the host */
-	u32 missing_bcns;
+	__le32 missing_bcns;
 
 	/* the amount of wake on host-access times */
-	u32 wake_on_host;
+	__le32 wake_on_host;
 
 	/* the amount of wake on timer-expire */
-	u32 wake_on_timer_exp;
+	__le32 wake_on_timer_exp;
 
 	/* the number of packets that were transmitted with PS bit set */
-	u32 tx_with_ps;
+	__le32 tx_with_ps;
 
 	/* the number of packets that were transmitted with PS bit clear */
-	u32 tx_without_ps;
+	__le32 tx_without_ps;
 
 	/* the number of received beacons */
-	u32 rcvd_beacons;
+	__le32 rcvd_beacons;
 
 	/* the number of entering into PowerOn (power save off) */
-	u32 power_save_off;
+	__le32 power_save_off;
 
 	/* the number of entries into power save mode */
-	u16 enable_ps;
+	__le16 enable_ps;
 
 	/*
 	 * the number of exits from power save, not including failed PS
 	 * transitions
 	 */
-	u16 disable_ps;
+	__le16 disable_ps;
 
 	/*
 	 * the number of times the TSF counter was adjusted because
 	 * of drift
 	 */
-	u32 fix_tsf_ps;
+	__le32 fix_tsf_ps;
 
 	/* Gives statistics about the spread continuous missed beacons.
 	 * The 16 LSB are dedicated for the PS mode.
@@ -881,53 +764,53 @@
 	 * ...
 	 * cont_miss_bcns_spread[9] - ten and more continuous missed beacons.
 	*/
-	u32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
+	__le32 cont_miss_bcns_spread[ACX_MISSED_BEACONS_SPREAD];
 
 	/* the number of beacons in awake mode */
-	u32 rcvd_awake_beacons;
+	__le32 rcvd_awake_beacons;
 } __attribute__ ((packed));
 
 struct acx_mic_statistics {
-	u32 rx_pkts;
-	u32 calc_failure;
+	__le32 rx_pkts;
+	__le32 calc_failure;
 } __attribute__ ((packed));
 
 struct acx_aes_statistics {
-	u32 encrypt_fail;
-	u32 decrypt_fail;
-	u32 encrypt_packets;
-	u32 decrypt_packets;
-	u32 encrypt_interrupt;
-	u32 decrypt_interrupt;
+	__le32 encrypt_fail;
+	__le32 decrypt_fail;
+	__le32 encrypt_packets;
+	__le32 decrypt_packets;
+	__le32 encrypt_interrupt;
+	__le32 decrypt_interrupt;
 } __attribute__ ((packed));
 
 struct acx_event_statistics {
-	u32 heart_beat;
-	u32 calibration;
-	u32 rx_mismatch;
-	u32 rx_mem_empty;
-	u32 rx_pool;
-	u32 oom_late;
-	u32 phy_transmit_error;
-	u32 tx_stuck;
+	__le32 heart_beat;
+	__le32 calibration;
+	__le32 rx_mismatch;
+	__le32 rx_mem_empty;
+	__le32 rx_pool;
+	__le32 oom_late;
+	__le32 phy_transmit_error;
+	__le32 tx_stuck;
 } __attribute__ ((packed));
 
 struct acx_ps_statistics {
-	u32 pspoll_timeouts;
-	u32 upsd_timeouts;
-	u32 upsd_max_sptime;
-	u32 upsd_max_apturn;
-	u32 pspoll_max_apturn;
-	u32 pspoll_utilization;
-	u32 upsd_utilization;
+	__le32 pspoll_timeouts;
+	__le32 upsd_timeouts;
+	__le32 upsd_max_sptime;
+	__le32 upsd_max_apturn;
+	__le32 pspoll_max_apturn;
+	__le32 pspoll_utilization;
+	__le32 upsd_utilization;
 } __attribute__ ((packed));
 
 struct acx_rxpipe_statistics {
-	u32 rx_prep_beacon_drop;
-	u32 descr_host_int_trig_rx_data;
-	u32 beacon_buffer_thres_host_int_trig_rx_data;
-	u32 missed_beacon_host_int_trig_rx_data;
-	u32 tx_xfr_host_int_trig_rx_data;
+	__le32 rx_prep_beacon_drop;
+	__le32 descr_host_int_trig_rx_data;
+	__le32 beacon_buffer_thres_host_int_trig_rx_data;
+	__le32 missed_beacon_host_int_trig_rx_data;
+	__le32 tx_xfr_host_int_trig_rx_data;
 } __attribute__ ((packed));
 
 struct acx_statistics {
@@ -946,13 +829,8 @@
 	struct acx_rxpipe_statistics rxpipe;
 } __attribute__ ((packed));
 
-#define ACX_MAX_RATE_CLASSES       8
-#define ACX_RATE_MASK_UNSPECIFIED  0
-#define ACX_RATE_MASK_ALL          0x1eff
-#define ACX_RATE_RETRY_LIMIT       10
-
 struct acx_rate_class {
-	u32 enabled_rates;
+	__le32 enabled_rates;
 	u8 short_retry_limit;
 	u8 long_retry_limit;
 	u8 aflags;
@@ -962,47 +840,20 @@
 struct acx_rate_policy {
 	struct acx_header header;
 
-	u32 rate_class_cnt;
-	struct acx_rate_class rate_class[ACX_MAX_RATE_CLASSES];
+	__le32 rate_class_cnt;
+	struct acx_rate_class rate_class[CONF_TX_MAX_RATE_CLASSES];
 } __attribute__ ((packed));
 
-#define WL1271_ACX_AC_COUNT 4
-
 struct acx_ac_cfg {
 	struct acx_header header;
 	u8 ac;
 	u8 cw_min;
-	u16 cw_max;
+	__le16 cw_max;
 	u8 aifsn;
 	u8 reserved;
-	u16 tx_op_limit;
+	__le16 tx_op_limit;
 } __attribute__ ((packed));
 
-enum wl1271_acx_ac {
-	WL1271_ACX_AC_BE = 0,
-	WL1271_ACX_AC_BK = 1,
-	WL1271_ACX_AC_VI = 2,
-	WL1271_ACX_AC_VO = 3,
-	WL1271_ACX_AC_CTS2SELF = 4,
-	WL1271_ACX_AC_ANY_TID = 0x1F,
-	WL1271_ACX_AC_INVALID = 0xFF,
-};
-
-enum wl1271_acx_ps_scheme {
-	WL1271_ACX_PS_SCHEME_LEGACY = 0,
-	WL1271_ACX_PS_SCHEME_UPSD_TRIGGER = 1,
-	WL1271_ACX_PS_SCHEME_LEGACY_PSPOLL = 2,
-	WL1271_ACX_PS_SCHEME_SAPSD = 3,
-};
-
-enum wl1271_acx_ack_policy {
-	WL1271_ACX_ACK_POLICY_LEGACY = 0,
-	WL1271_ACX_ACK_POLICY_NO_ACK = 1,
-	WL1271_ACX_ACK_POLICY_BLOCK = 2,
-};
-
-#define WL1271_ACX_TID_COUNT 7
-
 struct acx_tid_config {
 	struct acx_header header;
 	u8 queue_id;
@@ -1011,22 +862,19 @@
 	u8 ps_scheme;
 	u8 ack_policy;
 	u8 padding[3];
-	u32 apsd_conf[2];
+	__le32 apsd_conf[2];
 } __attribute__ ((packed));
 
 struct acx_frag_threshold {
 	struct acx_header header;
-	u16 frag_threshold;
+	__le16 frag_threshold;
 	u8 padding[2];
 } __attribute__ ((packed));
 
-#define WL1271_ACX_TX_COMPL_TIMEOUT   5
-#define WL1271_ACX_TX_COMPL_THRESHOLD 5
-
 struct acx_tx_config_options {
 	struct acx_header header;
-	u16 tx_compl_timeout;     /* msec */
-	u16 tx_compl_threshold;   /* number of packets */
+	__le16 tx_compl_timeout;     /* msec */
+	__le16 tx_compl_threshold;   /* number of packets */
 } __attribute__ ((packed));
 
 #define ACX_RX_MEM_BLOCKS     64
@@ -1041,79 +889,87 @@
 	u8 tx_min_mem_block_num;
 	u8 num_stations;
 	u8 num_ssid_profiles;
-	u32 total_tx_descriptors;
+	__le32 total_tx_descriptors;
 } __attribute__ ((packed));
 
 struct wl1271_acx_mem_map {
 	struct acx_header header;
 
-	void *code_start;
-	void *code_end;
+	__le32 code_start;
+	__le32 code_end;
 
-	void *wep_defkey_start;
-	void *wep_defkey_end;
+	__le32 wep_defkey_start;
+	__le32 wep_defkey_end;
 
-	void *sta_table_start;
-	void *sta_table_end;
+	__le32 sta_table_start;
+	__le32 sta_table_end;
 
-	void *packet_template_start;
-	void *packet_template_end;
+	__le32 packet_template_start;
+	__le32 packet_template_end;
 
 	/* Address of the TX result interface (control block) */
-	u32 tx_result;
-	u32 tx_result_queue_start;
+	__le32 tx_result;
+	__le32 tx_result_queue_start;
 
-	void *queue_memory_start;
-	void *queue_memory_end;
+	__le32 queue_memory_start;
+	__le32 queue_memory_end;
 
-	u32 packet_memory_pool_start;
-	u32 packet_memory_pool_end;
+	__le32 packet_memory_pool_start;
+	__le32 packet_memory_pool_end;
 
-	void *debug_buffer1_start;
-	void *debug_buffer1_end;
+	__le32 debug_buffer1_start;
+	__le32 debug_buffer1_end;
 
-	void *debug_buffer2_start;
-	void *debug_buffer2_end;
+	__le32 debug_buffer2_start;
+	__le32 debug_buffer2_end;
 
 	/* Number of blocks FW allocated for TX packets */
-	u32 num_tx_mem_blocks;
+	__le32 num_tx_mem_blocks;
 
 	/* Number of blocks FW allocated for RX packets */
-	u32 num_rx_mem_blocks;
+	__le32 num_rx_mem_blocks;
 
 	/* the following 4 fields are valid in SLAVE mode only */
 	u8 *tx_cbuf;
 	u8 *rx_cbuf;
-	void *rx_ctrl;
-	void *tx_ctrl;
+	__le32 rx_ctrl;
+	__le32 tx_ctrl;
 } __attribute__ ((packed));
 
-enum wl1271_acx_rx_queue_type {
-	RX_QUEUE_TYPE_RX_LOW_PRIORITY,    /* All except the high priority */
-	RX_QUEUE_TYPE_RX_HIGH_PRIORITY,   /* Management and voice packets */
-	RX_QUEUE_TYPE_NUM,
-	RX_QUEUE_TYPE_MAX = USHORT_MAX
-};
-
-#define WL1271_RX_INTR_THRESHOLD_DEF  0       /* no pacing, send interrupt on
-					       * every event */
-#define WL1271_RX_INTR_THRESHOLD_MIN  0
-#define WL1271_RX_INTR_THRESHOLD_MAX  15
-
-#define WL1271_RX_INTR_TIMEOUT_DEF    5
-#define WL1271_RX_INTR_TIMEOUT_MIN    1
-#define WL1271_RX_INTR_TIMEOUT_MAX    100
-
 struct wl1271_acx_rx_config_opt {
 	struct acx_header header;
 
-	u16 mblk_threshold;
-	u16 threshold;
-	u16 timeout;
+	__le16 mblk_threshold;
+	__le16 threshold;
+	__le16 timeout;
 	u8 queue_type;
 	u8 reserved;
 } __attribute__ ((packed));
 
+
+struct wl1271_acx_bet_enable {
+	struct acx_header header;
+
+	u8 enable;
+	u8 max_consecutive;
+	u8 padding[2];
+} __attribute__ ((packed));
+
+#define ACX_IPV4_VERSION 4
+#define ACX_IPV6_VERSION 6
+#define ACX_IPV4_ADDR_SIZE 4
+struct wl1271_acx_arp_filter {
+	struct acx_header header;
+	u8 version;         /* ACX_IPV4_VERSION, ACX_IPV6_VERSION */
+	u8 enable;          /* 1 to enable ARP filtering, 0 to disable */
+	u8 padding[2];
+	u8 address[16];     /* The configured device IP address - all ARP
+			       requests directed to this IP address will pass
+			       through. For IPv4, the first four bytes are
+			       used. */
+} __attribute__((packed));
+
+
 enum {
 	ACX_WAKE_UP_CONDITIONS      = 0x0002,
 	ACX_MEM_CFG                 = 0x0003,
@@ -1170,6 +1026,9 @@
 	ACX_PEER_HT_CAP             = 0x0057,
 	ACX_HT_BSS_OPERATION        = 0x0058,
 	ACX_COEX_ACTIVITY           = 0x0059,
+	ACX_SET_SMART_REFLEX_DEBUG  = 0x005A,
+	ACX_SET_SMART_REFLEX_STATE  = 0x005B,
+	ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
 	DOT11_RX_MSDU_LIFE_TIME     = 0x1004,
 	DOT11_CUR_TX_PWR            = 0x100D,
 	DOT11_RX_DOT11_MODE         = 0x1012,
@@ -1182,23 +1041,24 @@
 };
 
 
-int wl1271_acx_wake_up_conditions(struct wl1271 *wl, u8 wake_up_event,
-				  u8 listen_interval);
+int wl1271_acx_wake_up_conditions(struct wl1271 *wl);
 int wl1271_acx_sleep_auth(struct wl1271 *wl, u8 sleep_auth);
 int wl1271_acx_fw_version(struct wl1271 *wl, char *buf, size_t len);
 int wl1271_acx_tx_power(struct wl1271 *wl, int power);
 int wl1271_acx_feature_cfg(struct wl1271 *wl);
 int wl1271_acx_mem_map(struct wl1271 *wl,
 		       struct acx_header *mem_map, size_t len);
-int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl, u32 life_time);
+int wl1271_acx_rx_msdu_life_time(struct wl1271 *wl);
 int wl1271_acx_rx_config(struct wl1271 *wl, u32 config, u32 filter);
 int wl1271_acx_pd_threshold(struct wl1271 *wl);
 int wl1271_acx_slot(struct wl1271 *wl, enum acx_slot_type slot_time);
-int wl1271_acx_group_address_tbl(struct wl1271 *wl);
+int wl1271_acx_group_address_tbl(struct wl1271 *wl, bool enable,
+				 void *mc_list, u32 mc_list_len);
 int wl1271_acx_service_period_timeout(struct wl1271 *wl);
 int wl1271_acx_rts_threshold(struct wl1271 *wl, u16 rts_threshold);
-int wl1271_acx_beacon_filter_opt(struct wl1271 *wl);
+int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter);
 int wl1271_acx_beacon_filter_table(struct wl1271 *wl);
+int wl1271_acx_conn_monit_params(struct wl1271 *wl);
 int wl1271_acx_sg_enable(struct wl1271 *wl);
 int wl1271_acx_sg_cfg(struct wl1271 *wl);
 int wl1271_acx_cca_threshold(struct wl1271 *wl);
@@ -1207,9 +1067,9 @@
 int wl1271_acx_event_mbox_mask(struct wl1271 *wl, u32 event_mask);
 int wl1271_acx_set_preamble(struct wl1271 *wl, enum acx_preamble_type preamble);
 int wl1271_acx_cts_protect(struct wl1271 *wl,
-			    enum acx_ctsprotect_type ctsprotect);
+			   enum acx_ctsprotect_type ctsprotect);
 int wl1271_acx_statistics(struct wl1271 *wl, struct acx_statistics *stats);
-int wl1271_acx_rate_policies(struct wl1271 *wl);
+int wl1271_acx_rate_policies(struct wl1271 *wl, u32 enabled_rates);
 int wl1271_acx_ac_cfg(struct wl1271 *wl);
 int wl1271_acx_tid_cfg(struct wl1271 *wl);
 int wl1271_acx_frag_threshold(struct wl1271 *wl);
@@ -1217,5 +1077,9 @@
 int wl1271_acx_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
+int wl1271_acx_smart_reflex(struct wl1271 *wl);
+int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);
+int wl1271_acx_arp_ip_filter(struct wl1271 *wl, bool enable, u8 *address,
+			     u8 version);
 
 #endif /* __WL1271_ACX_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 8228ef4..ba4a2b4 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -39,6 +39,14 @@
 			.start = REGISTERS_BASE,
 			.size  = 0x00008800
 		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
 	},
 
 	[PART_WORK] = {
@@ -48,7 +56,15 @@
 		},
 		.reg = {
 			.start = REGISTERS_BASE,
-			.size  = 0x0000b000
+			.size  = 0x0000a000
+		},
+		.mem2 = {
+			.start = 0x003004f8,
+			.size  = 0x00000004
+		},
+		.mem3 = {
+			.start = 0x00040404,
+			.size  = 0x00000000
 		},
 	},
 
@@ -60,6 +76,14 @@
 		.reg = {
 			.start = DRPW_BASE,
 			.size  = 0x00006000
+		},
+		.mem2 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
+		},
+		.mem3 = {
+			.start = 0x00000000,
+			.size  = 0x00000000
 		}
 	}
 };
@@ -69,19 +93,19 @@
 	u32 cpu_ctrl;
 
 	/* 10.5.0 run the firmware (I) */
-	cpu_ctrl = wl1271_reg_read32(wl, ACX_REG_ECPU_CONTROL);
+	cpu_ctrl = wl1271_spi_read32(wl, ACX_REG_ECPU_CONTROL);
 
 	/* 10.5.1 run the firmware (II) */
 	cpu_ctrl |= flag;
-	wl1271_reg_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
+	wl1271_spi_write32(wl, ACX_REG_ECPU_CONTROL, cpu_ctrl);
 }
 
 static void wl1271_boot_fw_version(struct wl1271 *wl)
 {
 	struct wl1271_static_data static_data;
 
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr,
-			    &static_data, sizeof(static_data));
+	wl1271_spi_read(wl, wl->cmd_box_addr,
+			&static_data, sizeof(static_data), false);
 
 	strncpy(wl->chip.fw_ver, static_data.fw_version,
 		sizeof(wl->chip.fw_ver));
@@ -93,8 +117,9 @@
 static int wl1271_boot_upload_firmware_chunk(struct wl1271 *wl, void *buf,
 					     size_t fw_data_len, u32 dest)
 {
+	struct wl1271_partition_set partition;
 	int addr, chunk_num, partition_limit;
-	u8 *p;
+	u8 *p, *chunk;
 
 	/* whal_FwCtrl_LoadFwImageSm() */
 
@@ -103,16 +128,20 @@
 	wl1271_debug(DEBUG_BOOT, "fw_data_len %zd chunk_size %d",
 		     fw_data_len, CHUNK_SIZE);
 
-
 	if ((fw_data_len % 4) != 0) {
 		wl1271_error("firmware length not multiple of four");
 		return -EIO;
 	}
 
-	wl1271_set_partition(wl, dest,
-			     part_table[PART_DOWN].mem.size,
-			     part_table[PART_DOWN].reg.start,
-			     part_table[PART_DOWN].reg.size);
+	chunk = kmalloc(CHUNK_SIZE, GFP_KERNEL);
+	if (!chunk) {
+		wl1271_error("allocation for firmware upload chunk failed");
+		return -ENOMEM;
+	}
+
+	memcpy(&partition, &part_table[PART_DOWN], sizeof(partition));
+	partition.mem.start = dest;
+	wl1271_set_partition(wl, &partition);
 
 	/* 10.1 set partition limit and chunk num */
 	chunk_num = 0;
@@ -125,21 +154,17 @@
 			addr = dest + chunk_num * CHUNK_SIZE;
 			partition_limit = chunk_num * CHUNK_SIZE +
 				part_table[PART_DOWN].mem.size;
-
-			/* FIXME: Over 80 chars! */
-			wl1271_set_partition(wl,
-					     addr,
-					     part_table[PART_DOWN].mem.size,
-					     part_table[PART_DOWN].reg.start,
-					     part_table[PART_DOWN].reg.size);
+			partition.mem.start = addr;
+			wl1271_set_partition(wl, &partition);
 		}
 
 		/* 10.3 upload the chunk */
 		addr = dest + chunk_num * CHUNK_SIZE;
 		p = buf + chunk_num * CHUNK_SIZE;
+		memcpy(chunk, p, CHUNK_SIZE);
 		wl1271_debug(DEBUG_BOOT, "uploading fw chunk 0x%p to 0x%x",
 			     p, addr);
-		wl1271_spi_mem_write(wl, addr, p, CHUNK_SIZE);
+		wl1271_spi_write(wl, addr, chunk, CHUNK_SIZE, false);
 
 		chunk_num++;
 	}
@@ -147,28 +172,31 @@
 	/* 10.4 upload the last chunk */
 	addr = dest + chunk_num * CHUNK_SIZE;
 	p = buf + chunk_num * CHUNK_SIZE;
+	memcpy(chunk, p, fw_data_len % CHUNK_SIZE);
 	wl1271_debug(DEBUG_BOOT, "uploading fw last chunk (%zd B) 0x%p to 0x%x",
 		     fw_data_len % CHUNK_SIZE, p, addr);
-	wl1271_spi_mem_write(wl, addr, p, fw_data_len % CHUNK_SIZE);
+	wl1271_spi_write(wl, addr, chunk, fw_data_len % CHUNK_SIZE, false);
 
+	kfree(chunk);
 	return 0;
 }
 
 static int wl1271_boot_upload_firmware(struct wl1271 *wl)
 {
 	u32 chunks, addr, len;
+	int ret = 0;
 	u8 *fw;
 
 	fw = wl->fw;
-	chunks = be32_to_cpup((u32 *) fw);
+	chunks = be32_to_cpup((__be32 *) fw);
 	fw += sizeof(u32);
 
 	wl1271_debug(DEBUG_BOOT, "firmware chunks to be uploaded: %u", chunks);
 
 	while (chunks--) {
-		addr = be32_to_cpup((u32 *) fw);
+		addr = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);
-		len = be32_to_cpup((u32 *) fw);
+		len = be32_to_cpup((__be32 *) fw);
 		fw += sizeof(u32);
 
 		if (len > 300000) {
@@ -177,11 +205,13 @@
 		}
 		wl1271_debug(DEBUG_BOOT, "chunk %d addr 0x%x len %u",
 			     chunks, addr, len);
-		wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+		ret = wl1271_boot_upload_firmware_chunk(wl, fw, len, addr);
+		if (ret != 0)
+			break;
 		fw += len;
 	}
 
-	return 0;
+	return ret;
 }
 
 static int wl1271_boot_upload_nvs(struct wl1271 *wl)
@@ -235,7 +265,7 @@
 			wl1271_debug(DEBUG_BOOT,
 				     "nvs burst write 0x%x: 0x%x",
 				     dest_addr, val);
-			wl1271_reg_write32(wl, dest_addr, val);
+			wl1271_spi_write32(wl, dest_addr, val);
 
 			nvs_ptr += 4;
 			dest_addr += 4;
@@ -253,20 +283,18 @@
 	/* FIXME: The driver sets the partition here, but this is not needed,
 	   since it sets to the same one as currently in use */
 	/* Now we must set the partition correctly */
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Copy the NVS tables to a new block to ensure alignment */
 	nvs_aligned = kmemdup(nvs_ptr, nvs_len, GFP_KERNEL);
+	if (!nvs_aligned)
+		return -ENOMEM;
 
 	/* And finally we upload the NVS tables */
 	/* FIXME: In wl1271, we upload everything at once.
 	   No endianness handling needed here?! The ref driver doesn't do
 	   anything about it at this point */
-	wl1271_spi_mem_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len);
+	wl1271_spi_write(wl, CMD_MBOX_ADDRESS, nvs_aligned, nvs_len, false);
 
 	kfree(nvs_aligned);
 	return 0;
@@ -275,9 +303,9 @@
 static void wl1271_boot_enable_interrupts(struct wl1271 *wl)
 {
 	enable_irq(wl->irq);
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
-	wl1271_reg_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
+	wl1271_spi_write32(wl, HI_CFG, HI_CFG_DEF_VAL);
 }
 
 static int wl1271_boot_soft_reset(struct wl1271 *wl)
@@ -286,12 +314,13 @@
 	u32 boot_data;
 
 	/* perform soft reset */
-	wl1271_reg_write32(wl, ACX_REG_SLV_SOFT_RESET, ACX_SLV_SOFT_RESET_BIT);
+	wl1271_spi_write32(wl, ACX_REG_SLV_SOFT_RESET,
+			   ACX_SLV_SOFT_RESET_BIT);
 
 	/* SOFT_RESET is self clearing */
 	timeout = jiffies + usecs_to_jiffies(SOFT_RESET_MAX_TIME);
 	while (1) {
-		boot_data = wl1271_reg_read32(wl, ACX_REG_SLV_SOFT_RESET);
+		boot_data = wl1271_spi_read32(wl, ACX_REG_SLV_SOFT_RESET);
 		wl1271_debug(DEBUG_BOOT, "soft reset bootdata 0x%x", boot_data);
 		if ((boot_data & ACX_SLV_SOFT_RESET_BIT) == 0)
 			break;
@@ -307,10 +336,10 @@
 	}
 
 	/* disable Rx/Tx */
-	wl1271_reg_write32(wl, ENABLE, 0x0);
+	wl1271_spi_write32(wl, ENABLE, 0x0);
 
 	/* disable auto calibration on start*/
-	wl1271_reg_write32(wl, SPARE_A2, 0xffff);
+	wl1271_spi_write32(wl, SPARE_A2, 0xffff);
 
 	return 0;
 }
@@ -322,7 +351,7 @@
 
 	wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT);
 
-	chip_id = wl1271_reg_read32(wl, CHIP_ID_B);
+	chip_id = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id after firmware boot: 0x%x", chip_id);
 
@@ -335,7 +364,8 @@
 	loop = 0;
 	while (loop++ < INIT_LOOP) {
 		udelay(INIT_LOOP_DELAY);
-		interrupt = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		interrupt = wl1271_spi_read32(wl,
+					      ACX_REG_INTERRUPT_NO_CLEAR);
 
 		if (interrupt == 0xffffffff) {
 			wl1271_error("error reading hardware complete "
@@ -344,7 +374,7 @@
 		}
 		/* check that ACX_INTR_INIT_COMPLETE is enabled */
 		else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) {
-			wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+			wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
 					   WL1271_ACX_INTR_INIT_COMPLETE);
 			break;
 		}
@@ -357,17 +387,13 @@
 	}
 
 	/* get hardware config command mail box */
-	wl->cmd_box_addr = wl1271_reg_read32(wl, REG_COMMAND_MAILBOX_PTR);
+	wl->cmd_box_addr = wl1271_spi_read32(wl, REG_COMMAND_MAILBOX_PTR);
 
 	/* get hardware config event mail box */
-	wl->event_box_addr = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->event_box_addr = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
 
 	/* set the working partition to its "running" mode offset */
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	wl1271_debug(DEBUG_MAILBOX, "cmd_box_addr 0x%x event_box_addr 0x%x",
 		     wl->cmd_box_addr, wl->event_box_addr);
@@ -379,11 +405,9 @@
 	 * ready to receive event from the command mailbox
 	 */
 
-	/* enable gpio interrupts */
-	wl1271_boot_enable_interrupts(wl);
-
-	/* unmask all mbox events  */
-	wl->event_mask = 0xffffffff;
+	/* unmask required mbox events  */
+	wl->event_mask = BSS_LOSE_EVENT_ID |
+		SCAN_COMPLETE_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
@@ -399,34 +423,13 @@
 
 static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 {
-	u32 polarity, status, i;
+	u32 polarity;
 
-	wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-	wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_READ);
-
-	/* Wait until the command is complete (ie. bit 18 is set) */
-	for (i = 0; i < OCP_CMD_LOOP; i++) {
-		polarity = wl1271_reg_read32(wl, OCP_DATA_READ);
-		if (polarity & OCP_READY_MASK)
-			break;
-	}
-	if (i == OCP_CMD_LOOP) {
-		wl1271_error("OCP command timeout!");
-		return -EIO;
-	}
-
-	status = polarity & OCP_STATUS_MASK;
-	if (status != OCP_STATUS_OK) {
-		wl1271_error("OCP command failed (%d)", status);
-		return -EIO;
-	}
+	polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
 
 	/* We use HIGH polarity, so unset the LOW bit */
 	polarity &= ~POLARITY_LOW;
-
-	wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-	wl1271_reg_write32(wl, OCP_DATA_WRITE, polarity);
-	wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+	wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
 
 	return 0;
 }
@@ -436,16 +439,32 @@
 	int ret = 0;
 	u32 tmp, clk, pause;
 
-	if (REF_CLOCK == 0 || REF_CLOCK == 2)
-		/* ref clk: 19.2/38.4 */
+	if (REF_CLOCK == 0 || REF_CLOCK == 2 || REF_CLOCK == 4)
+		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
 	else if (REF_CLOCK == 1 || REF_CLOCK == 3)
 		/* ref clk: 26/52 */
 		clk = 0x5;
 
-	wl1271_reg_write32(wl, PLL_PARAMETERS, clk);
+	if (REF_CLOCK != 0) {
+		u16 val;
+		/* Set clock type */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
+		val &= FREF_CLK_TYPE_BITS;
+		val |= CLK_REQ_PRCM;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_TYPE, val);
+	} else {
+		u16 val;
+		/* Set clock polarity */
+		val = wl1271_top_reg_read(wl, OCP_REG_CLK_POLARITY);
+		val &= FREF_CLK_POLARITY_BITS;
+		val |= CLK_REQ_OUTN_SEL;
+		wl1271_top_reg_write(wl, OCP_REG_CLK_POLARITY, val);
+	}
 
-	pause = wl1271_reg_read32(wl, PLL_PARAMETERS);
+	wl1271_spi_write32(wl, PLL_PARAMETERS, clk);
+
+	pause = wl1271_spi_read32(wl, PLL_PARAMETERS);
 
 	wl1271_debug(DEBUG_BOOT, "pause1 0x%x", pause);
 
@@ -454,39 +473,31 @@
 					   * 0x3ff (magic number ).  How does
 					   * this work?! */
 	pause |= WU_COUNTER_PAUSE_VAL;
-	wl1271_reg_write32(wl, WU_COUNTER_PAUSE, pause);
+	wl1271_spi_write32(wl, WU_COUNTER_PAUSE, pause);
 
 	/* Continue the ELP wake up sequence */
-	wl1271_reg_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
+	wl1271_spi_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
 
-	wl1271_set_partition(wl,
-			     part_table[PART_DRPW].mem.start,
-			     part_table[PART_DRPW].mem.size,
-			     part_table[PART_DRPW].reg.start,
-			     part_table[PART_DRPW].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_DRPW]);
 
 	/* Read-modify-write DRPW_SCRATCH_START register (see next state)
 	   to be used by DRPw FW. The RTRIM value will be added by the FW
 	   before taking DRPw out of reset */
 
 	wl1271_debug(DEBUG_BOOT, "DRPW_SCRATCH_START %08x", DRPW_SCRATCH_START);
-	clk = wl1271_reg_read32(wl, DRPW_SCRATCH_START);
+	clk = wl1271_spi_read32(wl, DRPW_SCRATCH_START);
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
 	/* 2 */
 	clk |= (REF_CLOCK << 1) << 4;
-	wl1271_reg_write32(wl, DRPW_SCRATCH_START, clk);
+	wl1271_spi_write32(wl, DRPW_SCRATCH_START, clk);
 
-	wl1271_set_partition(wl,
-			     part_table[PART_WORK].mem.start,
-			     part_table[PART_WORK].mem.size,
-			     part_table[PART_WORK].reg.start,
-			     part_table[PART_WORK].reg.size);
+	wl1271_set_partition(wl, &part_table[PART_WORK]);
 
 	/* Disable interrupts */
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
 	ret = wl1271_boot_soft_reset(wl);
 	if (ret < 0)
@@ -501,21 +512,22 @@
 	 * ACX_EEPROMLESS_IND_REG */
 	wl1271_debug(DEBUG_BOOT, "ACX_EEPROMLESS_IND_REG");
 
-	wl1271_reg_write32(wl, ACX_EEPROMLESS_IND_REG, ACX_EEPROMLESS_IND_REG);
+	wl1271_spi_write32(wl, ACX_EEPROMLESS_IND_REG,
+			   ACX_EEPROMLESS_IND_REG);
 
-	tmp = wl1271_reg_read32(wl, CHIP_ID_B);
+	tmp = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	wl1271_debug(DEBUG_BOOT, "chip id 0x%x", tmp);
 
 	/* 6. read the EEPROM parameters */
-	tmp = wl1271_reg_read32(wl, SCR_PAD2);
+	tmp = wl1271_spi_read32(wl, SCR_PAD2);
 
 	ret = wl1271_boot_write_irq_polarity(wl);
 	if (ret < 0)
 		goto out;
 
 	/* FIXME: Need to check whether this is really what we want */
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_ALL_EVENTS_VECTOR);
 
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
@@ -530,6 +542,9 @@
 	if (ret < 0)
 		goto out;
 
+	/* Enable firmware interrupts now */
+	wl1271_boot_enable_interrupts(wl);
+
 	/* set the wl1271 default filters */
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
index b0d8fb4..412443e 100644
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -50,23 +50,17 @@
 #define WU_COUNTER_PAUSE_VAL 0x3FF
 #define WELP_ARM_COMMAND_VAL 0x4
 
-#define OCP_CMD_LOOP  32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ  0x2
-
-#define OCP_READY_MASK  BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP    0x00000
-#define OCP_STATUS_OK         0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-#define OCP_REG_POLARITY 0x30032
+#define OCP_REG_POLARITY     0x0064
+#define OCP_REG_CLK_TYPE     0x0448
+#define OCP_REG_CLK_POLARITY 0x0cb2
 
 #define CMD_MBOX_ADDRESS 0x407B4
 
 #define POLARITY_LOW BIT(1)
 
+#define FREF_CLK_TYPE_BITS     0xfffffe7f
+#define CLK_REQ_PRCM           0x100
+#define FREF_CLK_POLARITY_BITS 0xfffff8ff
+#define CLK_REQ_OUTN_SEL       0x700
+
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c
index 2a4351f..0666328 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.c
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c
@@ -50,18 +50,18 @@
 	int ret = 0;
 
 	cmd = buf;
-	cmd->id = id;
+	cmd->id = cpu_to_le16(id);
 	cmd->status = 0;
 
 	WARN_ON(len % 4 != 0);
 
-	wl1271_spi_mem_write(wl, wl->cmd_box_addr, buf, len);
+	wl1271_spi_write(wl, wl->cmd_box_addr, buf, len, false);
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD);
 
 	timeout = jiffies + msecs_to_jiffies(WL1271_COMMAND_TIMEOUT);
 
-	intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+	intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	while (!(intr & WL1271_ACX_INTR_CMD_COMPLETE)) {
 		if (time_after(jiffies, timeout)) {
 			wl1271_error("command complete timeout");
@@ -71,17 +71,17 @@
 
 		msleep(1);
 
-		intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
+		intr = wl1271_spi_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR);
 	}
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_ACK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_ACK,
 			   WL1271_ACX_INTR_CMD_COMPLETE);
 
 out:
 	return ret;
 }
 
-int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
+static int wl1271_cmd_cal_channel_tune(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_channel_tune *cmd;
 	int ret = 0;
@@ -104,7 +104,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
+static int wl1271_cmd_cal_update_ref_point(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_update_ref_point *cmd;
 	int ret = 0;
@@ -129,7 +129,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal_p2g(struct wl1271 *wl)
+static int wl1271_cmd_cal_p2g(struct wl1271 *wl)
 {
 	struct wl1271_cmd_cal_p2g *cmd;
 	int ret = 0;
@@ -150,7 +150,7 @@
 	return ret;
 }
 
-int wl1271_cmd_cal(struct wl1271 *wl)
+static int wl1271_cmd_cal(struct wl1271 *wl)
 {
 	/*
 	 * FIXME: we must make sure that we're not sleeping when calibration
@@ -175,11 +175,9 @@
 	return ret;
 }
 
-int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
-		    u16 beacon_interval, u8 wait)
+int wl1271_cmd_join(struct wl1271 *wl)
 {
 	static bool do_cal = true;
-	unsigned long timeout;
 	struct wl1271_cmd_join *join;
 	int ret, i;
 	u8 *bssid;
@@ -193,6 +191,18 @@
 			do_cal = false;
 	}
 
+	/* FIXME: This is a workaround, because with the current stack, we
+	 * cannot know when we have disassociated.  So, if we have already
+	 * joined, we disconnect before joining again. */
+	if (wl->joined) {
+		ret = wl1271_cmd_disconnect(wl);
+		if (ret < 0) {
+			wl1271_error("failed to disconnect before rejoining");
+			goto out;
+		}
+
+		wl->joined = false;
+	}
 
 	join = kzalloc(sizeof(*join), GFP_KERNEL);
 	if (!join) {
@@ -207,15 +217,34 @@
 	for (i = 0; i < ETH_ALEN; i++)
 		bssid[i] = wl->bssid[ETH_ALEN - i - 1];
 
-	join->rx_config_options = wl->rx_config;
-	join->rx_filter_options = wl->rx_filter;
+	join->rx_config_options = cpu_to_le32(wl->rx_config);
+	join->rx_filter_options = cpu_to_le32(wl->rx_filter);
+	join->bss_type = wl->bss_type;
 
-	join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS |
-		RATE_MASK_5_5MBPS | RATE_MASK_11MBPS;
+	/*
+	 * FIXME: disable temporarily all filters because after commit
+	 * 9cef8737 "mac80211: fix managed mode BSSID handling" broke
+	 * association. The filter logic needs to be implemented properly
+	 * and once that is done, this hack can be removed.
+	 */
+	join->rx_config_options = cpu_to_le32(0);
+	join->rx_filter_options = cpu_to_le32(WL1271_DEFAULT_RX_FILTER);
 
-	join->beacon_interval = beacon_interval;
-	join->dtim_interval = dtim_interval;
-	join->bss_type = bss_type;
+	if (wl->band == IEEE80211_BAND_2GHZ)
+		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_1MBPS   |
+						   CONF_HW_BIT_RATE_2MBPS   |
+						   CONF_HW_BIT_RATE_5_5MBPS |
+						   CONF_HW_BIT_RATE_11MBPS);
+	else {
+		join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ;
+		join->basic_rate_set = cpu_to_le32(CONF_HW_BIT_RATE_6MBPS  |
+						   CONF_HW_BIT_RATE_12MBPS |
+						   CONF_HW_BIT_RATE_24MBPS);
+	}
+
+	join->beacon_interval = cpu_to_le16(WL1271_DEFAULT_BEACON_INT);
+	join->dtim_interval = WL1271_DEFAULT_DTIM_PERIOD;
+
 	join->channel = wl->channel;
 	join->ssid_len = wl->ssid_len;
 	memcpy(join->ssid, wl->ssid, wl->ssid_len);
@@ -228,6 +257,10 @@
 
 	join->ctrl |= wl->session_counter << WL1271_JOIN_CMD_TX_SESSION_OFFSET;
 
+	/* reset TX security counters */
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 
 	ret = wl1271_cmd_send(wl, CMD_START_JOIN, join, sizeof(*join));
 	if (ret < 0) {
@@ -235,14 +268,13 @@
 		goto out_free;
 	}
 
-	timeout = msecs_to_jiffies(JOIN_TIMEOUT);
+	wl->joined = true;
 
 	/*
 	 * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to
 	 * simplify locking we just sleep instead, for now
 	 */
-	if (wait)
-		msleep(10);
+	msleep(10);
 
 out_free:
 	kfree(join);
@@ -274,19 +306,20 @@
 
 	if (answer) {
 		struct wl1271_command *cmd_answer;
+		u16 status;
 
 		/*
 		 * The test command got in, we can read the answer.
 		 * The answer would be a wl1271_command, where the
 		 * parameter array contains the actual answer.
 		 */
-		wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len);
+		wl1271_spi_read(wl, wl->cmd_box_addr, buf, buf_len, false);
 
 		cmd_answer = buf;
+		status = le16_to_cpu(cmd_answer->header.status);
 
-		if (cmd_answer->header.status != CMD_STATUS_SUCCESS)
-			wl1271_error("TEST command answer error: %d",
-				     cmd_answer->header.status);
+		if (status != CMD_STATUS_SUCCESS)
+			wl1271_error("TEST command answer error: %d", status);
 	}
 
 	return 0;
@@ -307,10 +340,10 @@
 
 	wl1271_debug(DEBUG_CMD, "cmd interrogate");
 
-	acx->id = id;
+	acx->id = cpu_to_le16(id);
 
 	/* payload length, does not include any headers */
-	acx->len = len - sizeof(*acx);
+	acx->len = cpu_to_le16(len - sizeof(*acx));
 
 	ret = wl1271_cmd_send(wl, CMD_INTERROGATE, acx, sizeof(*acx));
 	if (ret < 0) {
@@ -319,12 +352,12 @@
 	}
 
 	/* the interrogate command got in, we can read the answer */
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, buf, len);
+	wl1271_spi_read(wl, wl->cmd_box_addr, buf, len, false);
 
 	acx = buf;
-	if (acx->cmd.status != CMD_STATUS_SUCCESS)
+	if (le16_to_cpu(acx->cmd.status) != CMD_STATUS_SUCCESS)
 		wl1271_error("INTERROGATE command error: %d",
-			     acx->cmd.status);
+			     le16_to_cpu(acx->cmd.status));
 
 out:
 	return ret;
@@ -345,10 +378,10 @@
 
 	wl1271_debug(DEBUG_CMD, "cmd configure");
 
-	acx->id = id;
+	acx->id = cpu_to_le16(id);
 
 	/* payload length, does not include any headers */
-	acx->len = len - sizeof(*acx);
+	acx->len = cpu_to_le16(len - sizeof(*acx));
 
 	ret = wl1271_cmd_send(wl, CMD_CONFIGURE, acx, len);
 	if (ret < 0) {
@@ -414,8 +447,7 @@
 	int ret = 0;
 
 	/* FIXME: this should be in ps.c */
-	ret = wl1271_acx_wake_up_conditions(wl, WAKE_UP_EVENT_DTIM_BITMAP,
-					    wl->listen_int);
+	ret = wl1271_acx_wake_up_conditions(wl);
 	if (ret < 0) {
 		wl1271_error("couldn't set wake up conditions");
 		goto out;
@@ -433,7 +465,7 @@
 	ps_params->send_null_data = 1;
 	ps_params->retries = 5;
 	ps_params->hang_over_period = 128;
-	ps_params->null_data_rate = 1; /* 1 Mbps */
+	ps_params->null_data_rate = cpu_to_le32(1); /* 1 Mbps */
 
 	ret = wl1271_cmd_send(wl, CMD_SET_PS_MODE, ps_params,
 			      sizeof(*ps_params));
@@ -464,8 +496,8 @@
 	WARN_ON(len > MAX_READ_SIZE);
 	len = min_t(size_t, len, MAX_READ_SIZE);
 
-	cmd->addr = addr;
-	cmd->size = len;
+	cmd->addr = cpu_to_le32(addr);
+	cmd->size = cpu_to_le32(len);
 
 	ret = wl1271_cmd_send(wl, CMD_READ_MEMORY, cmd, sizeof(*cmd));
 	if (ret < 0) {
@@ -474,11 +506,11 @@
 	}
 
 	/* the read command got in, we can now read the answer */
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd));
+	wl1271_spi_read(wl, wl->cmd_box_addr, cmd, sizeof(*cmd), false);
 
-	if (cmd->header.status != CMD_STATUS_SUCCESS)
+	if (le16_to_cpu(cmd->header.status) != CMD_STATUS_SUCCESS)
 		wl1271_error("error in read command result: %d",
-			     cmd->header.status);
+			     le16_to_cpu(cmd->header.status));
 
 	memcpy(answer, cmd->value, len);
 
@@ -488,14 +520,31 @@
 }
 
 int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 num_channels,
+		    u8 active_scan, u8 high_prio, u8 band,
 		    u8 probe_requests)
 {
 
 	struct wl1271_cmd_trigger_scan_to *trigger = NULL;
 	struct wl1271_cmd_scan *params = NULL;
-	int i, ret;
+	struct ieee80211_channel *channels;
+	int i, j, n_ch, ret;
 	u16 scan_options = 0;
+	u8 ieee_band;
+
+	if (band == WL1271_SCAN_BAND_2_4_GHZ)
+		ieee_band = IEEE80211_BAND_2GHZ;
+	else if (band == WL1271_SCAN_BAND_DUAL && wl1271_11a_enabled())
+		ieee_band = IEEE80211_BAND_2GHZ;
+	else if (band == WL1271_SCAN_BAND_5_GHZ && wl1271_11a_enabled())
+		ieee_band = IEEE80211_BAND_5GHZ;
+	else
+		return -EINVAL;
+
+	if (wl->hw->wiphy->bands[ieee_band]->channels == NULL)
+		return -EINVAL;
+
+	channels = wl->hw->wiphy->bands[ieee_band]->channels;
+	n_ch = wl->hw->wiphy->bands[ieee_band]->n_channels;
 
 	if (wl->scanning)
 		return -EINVAL;
@@ -512,32 +561,43 @@
 		scan_options |= WL1271_SCAN_OPT_PASSIVE;
 	if (high_prio)
 		scan_options |= WL1271_SCAN_OPT_PRIORITY_HIGH;
-	params->params.scan_options = scan_options;
+	params->params.scan_options = cpu_to_le16(scan_options);
 
-	params->params.num_channels = num_channels;
 	params->params.num_probe_requests = probe_requests;
-	params->params.tx_rate = cpu_to_le32(RATE_MASK_2MBPS);
+	/* Let the fw autodetect suitable tx_rate for probes */
+	params->params.tx_rate = 0;
 	params->params.tid_trigger = 0;
 	params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG;
 
-	for (i = 0; i < num_channels; i++) {
-		params->channels[i].min_duration =
-			cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
-		params->channels[i].max_duration =
-			cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
-		memset(&params->channels[i].bssid_lsb, 0xff, 4);
-		memset(&params->channels[i].bssid_msb, 0xff, 2);
-		params->channels[i].early_termination = 0;
-		params->channels[i].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR;
-		params->channels[i].channel = i + 1;
+	if (band == WL1271_SCAN_BAND_DUAL)
+		params->params.band = WL1271_SCAN_BAND_2_4_GHZ;
+	else
+		params->params.band = band;
+
+	for (i = 0, j = 0; i < n_ch && i < WL1271_SCAN_MAX_CHANNELS; i++) {
+		if (!(channels[i].flags & IEEE80211_CHAN_DISABLED)) {
+			params->channels[j].min_duration =
+				cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION);
+			params->channels[j].max_duration =
+				cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION);
+			memset(&params->channels[j].bssid_lsb, 0xff, 4);
+			memset(&params->channels[j].bssid_msb, 0xff, 2);
+			params->channels[j].early_termination = 0;
+			params->channels[j].tx_power_att =
+				WL1271_SCAN_CURRENT_TX_PWR;
+			params->channels[j].channel = channels[i].hw_value;
+			j++;
+		}
 	}
 
+	params->params.num_channels = j;
+
 	if (len && ssid) {
 		params->params.ssid_len = len;
 		memcpy(params->params.ssid, ssid, len);
 	}
 
-	ret = wl1271_cmd_build_probe_req(wl, ssid, len);
+	ret = wl1271_cmd_build_probe_req(wl, ssid, len, ieee_band);
 	if (ret < 0) {
 		wl1271_error("PROBE request template failed");
 		goto out;
@@ -562,6 +622,19 @@
 	wl1271_dump(DEBUG_SCAN, "SCAN: ", params, sizeof(*params));
 
 	wl->scanning = true;
+	if (wl1271_11a_enabled()) {
+		wl->scan.state = band;
+		if (band == WL1271_SCAN_BAND_DUAL) {
+			wl->scan.active = active_scan;
+			wl->scan.high_prio = high_prio;
+			wl->scan.probe_requests = probe_requests;
+			if (len && ssid) {
+				wl->scan.ssid_len = len;
+				memcpy(wl->scan.ssid, ssid, len);
+			} else
+				wl->scan.ssid_len = 0;
+		}
+	}
 
 	ret = wl1271_cmd_send(wl, CMD_SCAN, params, sizeof(*params));
 	if (ret < 0) {
@@ -569,11 +642,12 @@
 		goto out;
 	}
 
-	wl1271_spi_mem_read(wl, wl->cmd_box_addr, params, sizeof(*params));
+	wl1271_spi_read(wl, wl->cmd_box_addr, params, sizeof(*params),
+			false);
 
-	if (params->header.status != CMD_STATUS_SUCCESS) {
+	if (le16_to_cpu(params->header.status) != CMD_STATUS_SUCCESS) {
 		wl1271_error("Scan command error: %d",
-			     params->header.status);
+			     le16_to_cpu(params->header.status));
 		wl->scanning = false;
 		ret = -EIO;
 		goto out;
@@ -603,9 +677,9 @@
 
 	cmd->len = cpu_to_le16(buf_len);
 	cmd->template_type = template_id;
-	cmd->enabled_rates = ACX_RATE_MASK_UNSPECIFIED;
-	cmd->short_retry_limit = ACX_RATE_RETRY_LIMIT;
-	cmd->long_retry_limit = ACX_RATE_RETRY_LIMIT;
+	cmd->enabled_rates = cpu_to_le32(wl->conf.tx.rc_conf.enabled_rates);
+	cmd->short_retry_limit = wl->conf.tx.rc_conf.short_retry_limit;
+	cmd->long_retry_limit = wl->conf.tx.rc_conf.long_retry_limit;
 
 	if (buf)
 		memcpy(cmd->template_data, buf, buf_len);
@@ -623,30 +697,62 @@
 	return ret;
 }
 
-static int wl1271_build_basic_rates(char *rates)
+static int wl1271_build_basic_rates(char *rates, u8 band)
 {
 	u8 index = 0;
 
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
-	rates[index++] = IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+	if (band == IEEE80211_BAND_2GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_1MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_2MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_5MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_CCK_RATE_11MB;
+	} else if (band == IEEE80211_BAND_5GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_6MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_12MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+	} else {
+		wl1271_error("build_basic_rates invalid band: %d", band);
+	}
 
 	return index;
 }
 
-static int wl1271_build_extended_rates(char *rates)
+static int wl1271_build_extended_rates(char *rates, u8 band)
 {
 	u8 index = 0;
 
-	rates[index++] = IEEE80211_OFDM_RATE_6MB;
-	rates[index++] = IEEE80211_OFDM_RATE_9MB;
-	rates[index++] = IEEE80211_OFDM_RATE_12MB;
-	rates[index++] = IEEE80211_OFDM_RATE_18MB;
-	rates[index++] = IEEE80211_OFDM_RATE_24MB;
-	rates[index++] = IEEE80211_OFDM_RATE_36MB;
-	rates[index++] = IEEE80211_OFDM_RATE_48MB;
-	rates[index++] = IEEE80211_OFDM_RATE_54MB;
+	if (band == IEEE80211_BAND_2GHZ) {
+		rates[index++] = IEEE80211_OFDM_RATE_6MB;
+		rates[index++] = IEEE80211_OFDM_RATE_9MB;
+		rates[index++] = IEEE80211_OFDM_RATE_12MB;
+		rates[index++] = IEEE80211_OFDM_RATE_18MB;
+		rates[index++] = IEEE80211_OFDM_RATE_24MB;
+		rates[index++] = IEEE80211_OFDM_RATE_36MB;
+		rates[index++] = IEEE80211_OFDM_RATE_48MB;
+		rates[index++] = IEEE80211_OFDM_RATE_54MB;
+	} else if (band == IEEE80211_BAND_5GHZ) {
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_9MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_18MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_24MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_36MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_48MB;
+		rates[index++] =
+			IEEE80211_BASIC_RATE_MASK | IEEE80211_OFDM_RATE_54MB;
+	} else {
+		wl1271_error("build_basic_rates invalid band: %d", band);
+	}
 
 	return index;
 }
@@ -665,7 +771,8 @@
 
 	memcpy(template.header.sa, wl->mac_addr, ETH_ALEN);
 	template.header.frame_ctl = cpu_to_le16(IEEE80211_FTYPE_DATA |
-						IEEE80211_STYPE_NULLFUNC);
+						IEEE80211_STYPE_NULLFUNC |
+						IEEE80211_FCTL_TODS);
 
 	return wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, &template,
 				       sizeof(template));
@@ -678,7 +785,10 @@
 
 	memcpy(template.bssid, wl->bssid, ETH_ALEN);
 	memcpy(template.ta, wl->mac_addr, ETH_ALEN);
-	template.aid = aid;
+
+	/* aid in PS-Poll has its two MSBs each set to 1 */
+	template.aid = cpu_to_le16(1 << 15 | 1 << 14 | aid);
+
 	template.fc = cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_PSPOLL);
 
 	return wl1271_cmd_template_set(wl, CMD_TEMPL_PS_POLL, &template,
@@ -686,12 +796,14 @@
 
 }
 
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len)
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
+			       u8 band)
 {
 	struct wl12xx_probe_req_template template;
 	struct wl12xx_ie_rates *rates;
 	char *ptr;
 	u16 size;
+	int ret;
 
 	ptr = (char *)&template;
 	size = sizeof(struct ieee80211_header);
@@ -713,20 +825,25 @@
 	/* Basic Rates */
 	rates = (struct wl12xx_ie_rates *)ptr;
 	rates->header.id = WLAN_EID_SUPP_RATES;
-	rates->header.len = wl1271_build_basic_rates(rates->rates);
+	rates->header.len = wl1271_build_basic_rates(rates->rates, band);
 	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
 	ptr += sizeof(struct wl12xx_ie_header) + rates->header.len;
 
 	/* Extended rates */
 	rates = (struct wl12xx_ie_rates *)ptr;
 	rates->header.id = WLAN_EID_EXT_SUPP_RATES;
-	rates->header.len = wl1271_build_extended_rates(rates->rates);
+	rates->header.len = wl1271_build_extended_rates(rates->rates, band);
 	size += sizeof(struct wl12xx_ie_header) + rates->header.len;
 
 	wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", &template, size);
 
-	return wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
-				       &template, size);
+	if (band == IEEE80211_BAND_2GHZ)
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+					      &template, size);
+	else
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
+					      &template, size);
+	return ret;
 }
 
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id)
@@ -743,7 +860,7 @@
 	}
 
 	cmd->id = id;
-	cmd->key_action = KEY_SET_ID;
+	cmd->key_action = cpu_to_le16(KEY_SET_ID);
 	cmd->key_type = KEY_WEP;
 
 	ret = wl1271_cmd_send(wl, CMD_SET_KEYS, cmd, sizeof(*cmd));
@@ -759,7 +876,8 @@
 }
 
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr)
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16)
 {
 	struct wl1271_cmd_set_keys *cmd;
 	int ret = 0;
@@ -773,16 +891,18 @@
 	if (key_type != KEY_WEP)
 		memcpy(cmd->addr, addr, ETH_ALEN);
 
-	cmd->key_action = action;
+	cmd->key_action = cpu_to_le16(action);
 	cmd->key_size = key_size;
 	cmd->key_type = key_type;
 
+	cmd->ac_seq_num16[0] = cpu_to_le16(tx_seq_16);
+	cmd->ac_seq_num32[0] = cpu_to_le32(tx_seq_32);
+
 	/* we have only one SSID profile */
 	cmd->ssid_profile = 0;
 
 	cmd->id = id;
 
-	/* FIXME: this is from wl1251, needs to be checked */
 	if (key_type == KEY_TKIP) {
 		/*
 		 * We get the key in the following form:
@@ -811,3 +931,34 @@
 
 	return ret;
 }
+
+int wl1271_cmd_disconnect(struct wl1271 *wl)
+{
+	struct wl1271_cmd_disconnect *cmd;
+	int ret = 0;
+
+	wl1271_debug(DEBUG_CMD, "cmd disconnect");
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	cmd->rx_config_options = cpu_to_le32(wl->rx_config);
+	cmd->rx_filter_options = cpu_to_le32(wl->rx_filter);
+	/* disconnect reason is not used in immediate disconnections */
+	cmd->type = DISCONNECT_IMMEDIATE;
+
+	ret = wl1271_cmd_send(wl, CMD_DISCONNECT, cmd, sizeof(*cmd));
+	if (ret < 0) {
+		wl1271_error("failed to send disconnect command");
+		goto out_free;
+	}
+
+out_free:
+	kfree(cmd);
+
+out:
+	return ret;
+}
diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.h b/drivers/net/wireless/wl12xx/wl1271_cmd.h
index 951a844..174b820 100644
--- a/drivers/net/wireless/wl12xx/wl1271_cmd.h
+++ b/drivers/net/wireless/wl12xx/wl1271_cmd.h
@@ -30,8 +30,7 @@
 struct acx_header;
 
 int wl1271_cmd_send(struct wl1271 *wl, u16 type, void *buf, size_t buf_len);
-int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type, u8 dtim_interval,
-		    u16 beacon_interval, u8 wait);
+int wl1271_cmd_join(struct wl1271 *wl);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
 int wl1271_cmd_interrogate(struct wl1271 *wl, u16 id, void *buf, size_t len);
 int wl1271_cmd_configure(struct wl1271 *wl, u16 id, void *buf, size_t len);
@@ -40,16 +39,19 @@
 int wl1271_cmd_read_memory(struct wl1271 *wl, u32 addr, void *answer,
 			   size_t len);
 int wl1271_cmd_scan(struct wl1271 *wl, u8 *ssid, size_t len,
-		    u8 active_scan, u8 high_prio, u8 num_channels,
+		    u8 active_scan, u8 high_prio, u8 band,
 		    u8 probe_requests);
 int wl1271_cmd_template_set(struct wl1271 *wl, u16 template_id,
 			    void *buf, size_t buf_len);
 int wl1271_cmd_build_null_data(struct wl1271 *wl);
 int wl1271_cmd_build_ps_poll(struct wl1271 *wl, u16 aid);
-int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len);
+int wl1271_cmd_build_probe_req(struct wl1271 *wl, u8 *ssid, size_t ssid_len,
+			       u8 band);
 int wl1271_cmd_set_default_wep_key(struct wl1271 *wl, u8 id);
 int wl1271_cmd_set_key(struct wl1271 *wl, u16 action, u8 id, u8 key_type,
-		       u8 key_size, const u8 *key, const u8 *addr);
+		       u8 key_size, const u8 *key, const u8 *addr,
+		       u32 tx_seq_32, u16 tx_seq_16);
+int wl1271_cmd_disconnect(struct wl1271 *wl);
 
 enum wl1271_commands {
 	CMD_INTERROGATE     = 1,    /*use this to read information elements*/
@@ -118,8 +120,8 @@
 #define WL1271_CMD_TEMPL_MAX_SIZE  252
 
 struct wl1271_cmd_header {
-	u16 id;
-	u16 status;
+	__le16 id;
+	__le16 status;
 	/* payload */
 	u8 data[0];
 } __attribute__ ((packed));
@@ -172,17 +174,17 @@
 	struct wl1271_cmd_header header;
 
 	/* The address of the memory to read from or write to.*/
-	u32 addr;
+	__le32 addr;
 
 	/* The amount of data in bytes to read from or write to the WiLink
 	 * device.*/
-	u32 size;
+	__le32 size;
 
 	/* The actual value read from or written to the Wilink. The source
 	   of this field is the Host in WRITE command or the Wilink in READ
 	   command. */
 	u8 value[MAX_READ_SIZE];
-};
+} __attribute__ ((packed));
 
 #define CMDMBOX_HEADER_LEN 4
 #define CMDMBOX_INFO_ELEM_HEADER_LEN 4
@@ -196,22 +198,23 @@
 
 #define WL1271_JOIN_CMD_CTRL_TX_FLUSH     0x80 /* Firmware flushes all Tx */
 #define WL1271_JOIN_CMD_TX_SESSION_OFFSET 1
+#define WL1271_JOIN_CMD_BSS_TYPE_5GHZ 0x10
 
 struct wl1271_cmd_join {
 	struct wl1271_cmd_header header;
 
-	u32 bssid_lsb;
-	u16 bssid_msb;
-	u16 beacon_interval; /* in TBTTs */
-	u32 rx_config_options;
-	u32 rx_filter_options;
+	__le32 bssid_lsb;
+	__le16 bssid_msb;
+	__le16 beacon_interval; /* in TBTTs */
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
 
 	/*
 	 * The target uses this field to determine the rate at
 	 * which to transmit control frame responses (such as
 	 * ACK or CTS frames).
 	 */
-	u32 basic_rate_set;
+	__le32 basic_rate_set;
 	u8 dtim_interval;
 	/*
 	 * bits 0-2: This bitwise field specifies the type
@@ -240,10 +243,10 @@
 struct wl1271_cmd_template_set {
 	struct wl1271_cmd_header header;
 
-	u16 len;
+	__le16 len;
 	u8 template_type;
 	u8 index;  /* relevant only for KLV_TEMPLATE type */
-	u32 enabled_rates;
+	__le32 enabled_rates;
 	u8 short_retry_limit;
 	u8 long_retry_limit;
 	u8 aflags;
@@ -280,18 +283,13 @@
 	  * to power save mode.
 	  */
 	u8 hang_over_period;
-	u32 null_data_rate;
+	__le32 null_data_rate;
 } __attribute__ ((packed));
 
 /* HW encryption keys */
 #define NUM_ACCESS_CATEGORIES_COPY 4
 #define MAX_KEY_SIZE 32
 
-/* When set, disable HW encryption */
-#define DF_ENCRYPTION_DISABLE      0x01
-/* When set, disable HW decryption */
-#define DF_SNIFF_MODE_ENABLE       0x80
-
 enum wl1271_cmd_key_action {
 	KEY_ADD_OR_REPLACE = 1,
 	KEY_REMOVE         = 2,
@@ -316,9 +314,9 @@
 	u8 addr[ETH_ALEN];
 
 	/* key_action_e */
-	u16 key_action;
+	__le16 key_action;
 
-	u16 reserved_1;
+	__le16 reserved_1;
 
 	/* key size in bytes */
 	u8 key_size;
@@ -334,8 +332,8 @@
 	u8 id;
 	u8 reserved_2[6];
 	u8 key[MAX_KEY_SIZE];
-	u16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
-	u32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
+	__le16 ac_seq_num16[NUM_ACCESS_CATEGORIES_COPY];
+	__le32 ac_seq_num32[NUM_ACCESS_CATEGORIES_COPY];
 } __attribute__ ((packed));
 
 
@@ -347,19 +345,22 @@
 #define WL1271_SCAN_OPT_PRIORITY_HIGH  4
 #define WL1271_SCAN_CHAN_MIN_DURATION  30000  /* TU */
 #define WL1271_SCAN_CHAN_MAX_DURATION  60000  /* TU */
+#define WL1271_SCAN_BAND_2_4_GHZ 0
+#define WL1271_SCAN_BAND_5_GHZ 1
+#define WL1271_SCAN_BAND_DUAL 2
 
 struct basic_scan_params {
-	u32 rx_config_options;
-	u32 rx_filter_options;
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
 	/* Scan option flags (WL1271_SCAN_OPT_*) */
-	u16 scan_options;
+	__le16 scan_options;
 	/* Number of scan channels in the list (maximum 30) */
 	u8 num_channels;
 	/* This field indicates the number of probe requests to send
 	   per channel for an active scan */
 	u8 num_probe_requests;
 	/* Rate bit field for sending the probes */
-	u32 tx_rate;
+	__le32 tx_rate;
 	u8 tid_trigger;
 	u8 ssid_len;
 	/* in order to align */
@@ -374,10 +375,10 @@
 
 struct basic_scan_channel_params {
 	/* Duration in TU to wait for frames on a channel for active scan */
-	u32 min_duration;
-	u32 max_duration;
-	u32 bssid_lsb;
-	u16 bssid_msb;
+	__le32 min_duration;
+	__le32 max_duration;
+	__le32 bssid_lsb;
+	__le16 bssid_msb;
 	u8 early_termination;
 	u8 tx_power_att;
 	u8 channel;
@@ -397,13 +398,13 @@
 struct wl1271_cmd_trigger_scan_to {
 	struct wl1271_cmd_header header;
 
-	u32 timeout;
-};
+	__le32 timeout;
+} __attribute__ ((packed));
 
 struct wl1271_cmd_test_header {
 	u8 id;
 	u8 padding[3];
-};
+} __attribute__ ((packed));
 
 enum wl1271_channel_tune_bands {
 	WL1271_CHANNEL_TUNE_BAND_2_4,
@@ -425,7 +426,7 @@
 	u8 band;
 	u8 channel;
 
-	u16 radio_status;
+	__le16 radio_status;
 } __attribute__ ((packed));
 
 struct wl1271_cmd_cal_update_ref_point {
@@ -433,8 +434,8 @@
 
 	struct wl1271_cmd_test_header test;
 
-	s32 ref_power;
-	s32 ref_detector;
+	__le32 ref_power;
+	__le32 ref_detector;
 	u8  sub_band;
 	u8  padding[3];
 } __attribute__ ((packed));
@@ -449,16 +450,42 @@
 
 	struct wl1271_cmd_test_header test;
 
-	u16 len;
+	__le16 len;
 	u8  buf[MAX_TLV_LENGTH];
 	u8  type;
 	u8  padding;
 
-	s16 radio_status;
+	__le16 radio_status;
 	u8  nvs_version[MAX_NVS_VERSION_LENGTH];
 
 	u8  sub_band_mask;
 	u8  padding2;
 } __attribute__ ((packed));
 
+
+/*
+ * There are three types of disconnections:
+ *
+ * DISCONNECT_IMMEDIATE: the fw doesn't send any frames
+ * DISCONNECT_DEAUTH:    the fw generates a DEAUTH request with the reason
+ *                       we have passed
+ * DISCONNECT_DISASSOC:  the fw generates a DESASSOC request with the reason
+ *                       we have passed
+ */
+enum wl1271_disconnect_type {
+	DISCONNECT_IMMEDIATE,
+	DISCONNECT_DEAUTH,
+	DISCONNECT_DISASSOC
+};
+
+struct wl1271_cmd_disconnect {
+	__le32 rx_config_options;
+	__le32 rx_filter_options;
+
+	__le16 reason;
+	u8  type;
+
+	u8  padding;
+} __attribute__ ((packed));
+
 #endif /* __WL1271_CMD_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
new file mode 100644
index 0000000..061d475
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -0,0 +1,911 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __WL1271_CONF_H__
+#define __WL1271_CONF_H__
+
+enum {
+	CONF_HW_BIT_RATE_1MBPS   = BIT(0),
+	CONF_HW_BIT_RATE_2MBPS   = BIT(1),
+	CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
+	CONF_HW_BIT_RATE_6MBPS   = BIT(3),
+	CONF_HW_BIT_RATE_9MBPS   = BIT(4),
+	CONF_HW_BIT_RATE_11MBPS  = BIT(5),
+	CONF_HW_BIT_RATE_12MBPS  = BIT(6),
+	CONF_HW_BIT_RATE_18MBPS  = BIT(7),
+	CONF_HW_BIT_RATE_22MBPS  = BIT(8),
+	CONF_HW_BIT_RATE_24MBPS  = BIT(9),
+	CONF_HW_BIT_RATE_36MBPS  = BIT(10),
+	CONF_HW_BIT_RATE_48MBPS  = BIT(11),
+	CONF_HW_BIT_RATE_54MBPS  = BIT(12),
+	CONF_HW_BIT_RATE_MCS_0   = BIT(13),
+	CONF_HW_BIT_RATE_MCS_1   = BIT(14),
+	CONF_HW_BIT_RATE_MCS_2   = BIT(15),
+	CONF_HW_BIT_RATE_MCS_3   = BIT(16),
+	CONF_HW_BIT_RATE_MCS_4   = BIT(17),
+	CONF_HW_BIT_RATE_MCS_5   = BIT(18),
+	CONF_HW_BIT_RATE_MCS_6   = BIT(19),
+	CONF_HW_BIT_RATE_MCS_7   = BIT(20)
+};
+
+enum {
+	CONF_HW_RATE_INDEX_1MBPS   = 0,
+	CONF_HW_RATE_INDEX_2MBPS   = 1,
+	CONF_HW_RATE_INDEX_5_5MBPS = 2,
+	CONF_HW_RATE_INDEX_6MBPS   = 3,
+	CONF_HW_RATE_INDEX_9MBPS   = 4,
+	CONF_HW_RATE_INDEX_11MBPS  = 5,
+	CONF_HW_RATE_INDEX_12MBPS  = 6,
+	CONF_HW_RATE_INDEX_18MBPS  = 7,
+	CONF_HW_RATE_INDEX_22MBPS  = 8,
+	CONF_HW_RATE_INDEX_24MBPS  = 9,
+	CONF_HW_RATE_INDEX_36MBPS  = 10,
+	CONF_HW_RATE_INDEX_48MBPS  = 11,
+	CONF_HW_RATE_INDEX_54MBPS  = 12,
+	CONF_HW_RATE_INDEX_MAX     = CONF_HW_RATE_INDEX_54MBPS,
+};
+
+struct conf_sg_settings {
+	/*
+	 * Defines the PER threshold in PPM of the BT voice of which reaching
+	 * this value will trigger raising the priority of the BT voice by
+	 * the BT IP until next NFS sample interval time as defined in
+	 * nfs_sample_interval.
+	 *
+	 * Unit: PER value in PPM (parts per million)
+	 * #Error_packets / #Total_packets
+
+	 * Range: u32
+	 */
+	u32 per_threshold;
+
+	/*
+	 * This value is an absolute time in micro-seconds to limit the
+	 * maximum scan duration compensation while in SG
+	 */
+	u32 max_scan_compensation_time;
+
+	/* Defines the PER threshold of the BT voice of which reaching this
+	 * value will trigger raising the priority of the BT voice until next
+	 * NFS sample interval time as defined in sample_interval.
+	 *
+	 * Unit: msec
+	 * Range: 1-65000
+	 */
+	u16 nfs_sample_interval;
+
+	/*
+	 * Defines the load ratio for the BT.
+	 * The WLAN ratio is: 100 - load_ratio
+	 *
+	 * Unit: Percent
+	 * Range: 0-100
+	 */
+	u8 load_ratio;
+
+	/*
+	 * true - Co-ex is allowed to enter/exit P.S automatically and
+	 *        transparently to the host
+	 *
+	 * false - Co-ex is disallowed to enter/exit P.S and will trigger an
+	 *         event to the host to notify for the need to enter/exit P.S
+	 *         due to BT change state
+	 *
+	 */
+	u8 auto_ps_mode;
+
+	/*
+	 * This parameter defines the compensation percentage of num of probe
+	 * requests in case scan is initiated during BT voice/BT ACL
+	 * guaranteed link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 probe_req_compensation;
+
+	/*
+	 * This parameter defines the compensation percentage of scan window
+	 * size in case scan is initiated during BT voice/BT ACL Guaranteed
+	 * link.
+	 *
+	 * Unit: Percent
+	 * Range: 0-255 (0 - No compensation)
+	 */
+	u8 scan_window_compensation;
+
+	/*
+	 * Defines the antenna configuration.
+	 *
+	 * Range: 0 - Single Antenna; 1 - Dual Antenna
+	 */
+	u8 antenna_config;
+
+	/*
+	 * The percent out of the Max consecutive beacon miss roaming trigger
+	 * which is the threshold for raising the priority of beacon
+	 * reception.
+	 *
+	 * Range: 1-100
+	 * N = MaxConsecutiveBeaconMiss
+	 * P = coexMaxConsecutiveBeaconMissPrecent
+	 * Threshold = MIN( N-1, round(N * P / 100))
+	 */
+	u8 beacon_miss_threshold;
+
+	/*
+	 * The RX rate threshold below which rate adaptation is assumed to be
+	 * occurring at the AP which will raise priority for ACTIVE_RX and RX
+	 * SP.
+	 *
+	 * Range: HW_BIT_RATE_*
+	 */
+	u32 rate_adaptation_threshold;
+
+	/*
+	 * The SNR above which the RX rate threshold indicating AP rate
+	 * adaptation is valid
+	 *
+	 * Range: -128 - 127
+	 */
+	s8 rate_adaptation_snr;
+};
+
+enum conf_rx_queue_type {
+	CONF_RX_QUEUE_TYPE_LOW_PRIORITY,  /* All except the high priority */
+	CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
+};
+
+struct conf_rx_settings {
+	/*
+	 * The maximum amount of time, in TU, before the
+	 * firmware discards the MSDU.
+	 *
+	 * Range: 0 - 0xFFFFFFFF
+	 */
+	u32 rx_msdu_life_time;
+
+	/*
+	 * Packet detection threshold in the PHY.
+	 *
+	 * FIXME: details unknown.
+	 */
+	u32 packet_detection_threshold;
+
+	/*
+	 * The longest time the STA will wait to receive traffic from the AP
+	 * after a PS-poll has been transmitted.
+	 *
+	 * Range: 0 - 200000
+	 */
+	u16 ps_poll_timeout;
+	/*
+	 * The longest time the STA will wait to receive traffic from the AP
+	 * after a frame has been sent from an UPSD enabled queue.
+	 *
+	 * Range: 0 - 200000
+	 */
+	u16 upsd_timeout;
+
+	/*
+	 * The number of octets in an MPDU, below which an RTS/CTS
+	 * handshake is not performed.
+	 *
+	 * Range: 0 - 4096
+	 */
+	u16 rts_threshold;
+
+	/*
+	 * The RX Clear Channel Assessment threshold in the PHY
+	 * (the energy threshold).
+	 *
+	 * Range: ENABLE_ENERGY_D  == 0x140A
+	 *        DISABLE_ENERGY_D == 0xFFEF
+	 */
+	u16 rx_cca_threshold;
+
+	/*
+	 * Occupied Rx mem-blocks number which requires interrupting the host
+	 * (0 = no buffering, 0xffff = disabled).
+	 *
+	 * Range: u16
+	 */
+	u16 irq_blk_threshold;
+
+	/*
+	 * Rx packets number which requires interrupting the host
+	 * (0 = no buffering).
+	 *
+	 * Range: u16
+	 */
+	u16 irq_pkt_threshold;
+
+	/*
+	 * Max time in msec the FW may delay RX-Complete interrupt.
+	 *
+	 * Range: 1 - 100
+	 */
+	u16 irq_timeout;
+
+	/*
+	 * The RX queue type.
+	 *
+	 * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
+	 */
+	u8 queue_type;
+};
+
+#define CONF_TX_MAX_RATE_CLASSES       8
+
+#define CONF_TX_RATE_MASK_UNSPECIFIED  0
+#define CONF_TX_RATE_MASK_ALL          0x1eff
+#define CONF_TX_RATE_RETRY_LIMIT       10
+
+struct conf_tx_rate_class {
+
+	/*
+	 * The rates enabled for this rate class.
+	 *
+	 * Range: CONF_HW_BIT_RATE_* bit mask
+	 */
+	u32 enabled_rates;
+
+	/*
+	 * The dot11 short retry limit used for TX retries.
+	 *
+	 * Range: u8
+	 */
+	u8 short_retry_limit;
+
+	/*
+	 * The dot11 long retry limit used for TX retries.
+	 *
+	 * Range: u8
+	 */
+	u8 long_retry_limit;
+
+	/*
+	 * Flags controlling the attributes of TX transmission.
+	 *
+	 * Range: bit 0: Truncate - when set, FW attempts to send a frame stop
+	 *               when the total valid per-rate attempts have
+	 *               been exhausted; otherwise transmissions
+	 *               will continue at the lowest available rate
+	 *               until the appropriate one of the
+	 *               short_retry_limit, long_retry_limit,
+	 *               dot11_max_transmit_msdu_life_time, or
+	 *               max_tx_life_time, is exhausted.
+	 *            1: Preamble Override - indicates if the preamble type
+	 *               should be used in TX.
+	 *            2: Preamble Type - the type of the preamble to be used by
+	 *               the policy (0 - long preamble, 1 - short preamble.
+	 */
+	u8 aflags;
+};
+
+#define CONF_TX_MAX_AC_COUNT 4
+
+/* Slot number setting to start transmission at PIFS interval */
+#define CONF_TX_AIFS_PIFS 1
+/* Slot number setting to start transmission at DIFS interval normal
+ * DCF access */
+#define CONF_TX_AIFS_DIFS 2
+
+
+enum conf_tx_ac {
+	CONF_TX_AC_BE = 0,         /* best effort / legacy */
+	CONF_TX_AC_BK = 1,         /* background */
+	CONF_TX_AC_VI = 2,         /* video */
+	CONF_TX_AC_VO = 3,         /* voice */
+	CONF_TX_AC_CTS2SELF = 4,   /* fictious AC, follows AC_VO */
+	CONF_TX_AC_ANY_TID = 0x1f
+};
+
+struct conf_tx_ac_category {
+	/*
+	 * The AC class identifier.
+	 *
+	 * Range: enum conf_tx_ac
+	 */
+	u8 ac;
+
+	/*
+	 * The contention window minimum size (in slots) for the access
+	 * class.
+	 *
+	 * Range: u8
+	 */
+	u8 cw_min;
+
+	/*
+	 * The contention window maximum size (in slots) for the access
+	 * class.
+	 *
+	 * Range: u8
+	 */
+	u16 cw_max;
+
+	/*
+	 * The AIF value (in slots) for the access class.
+	 *
+	 * Range: u8
+	 */
+	u8 aifsn;
+
+	/*
+	 * The TX Op Limit (in microseconds) for the access class.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_op_limit;
+};
+
+#define CONF_TX_MAX_TID_COUNT 7
+
+enum {
+	CONF_CHANNEL_TYPE_DCF = 0,   /* DC/LEGACY*/
+	CONF_CHANNEL_TYPE_EDCF = 1,  /* EDCA*/
+	CONF_CHANNEL_TYPE_HCCA = 2,  /* HCCA*/
+};
+
+enum {
+	CONF_PS_SCHEME_LEGACY = 0,
+	CONF_PS_SCHEME_UPSD_TRIGGER = 1,
+	CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
+	CONF_PS_SCHEME_SAPSD = 3,
+};
+
+enum {
+	CONF_ACK_POLICY_LEGACY = 0,
+	CONF_ACK_POLICY_NO_ACK = 1,
+	CONF_ACK_POLICY_BLOCK = 2,
+};
+
+
+struct conf_tx_tid {
+	u8 queue_id;
+	u8 channel_type;
+	u8 tsid;
+	u8 ps_scheme;
+	u8 ack_policy;
+	u32 apsd_conf[2];
+};
+
+struct conf_tx_settings {
+	/*
+	 * The TX ED value for TELEC Enable/Disable.
+	 *
+	 * Range: 0, 1
+	 */
+	u8 tx_energy_detection;
+
+	/*
+	 * Configuration for rate classes for TX (currently only one
+	 * rate class supported.)
+	 */
+	struct conf_tx_rate_class rc_conf;
+
+	/*
+	 * Configuration for access categories for TX rate control.
+	 */
+	u8 ac_conf_count;
+	struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
+
+	/*
+	 * Configuration for TID parameters.
+	 */
+	u8 tid_conf_count;
+	struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
+
+	/*
+	 * The TX fragmentation threshold.
+	 *
+	 * Range: u16
+	 */
+	u16 frag_threshold;
+
+	/*
+	 * Max time in msec the FW may delay frame TX-Complete interrupt.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_compl_timeout;
+
+	/*
+	 * Completed TX packet count which requires to issue the TX-Complete
+	 * interrupt.
+	 *
+	 * Range: u16
+	 */
+	u16 tx_compl_threshold;
+
+};
+
+enum {
+	CONF_WAKE_UP_EVENT_BEACON    = 0x01, /* Wake on every Beacon*/
+	CONF_WAKE_UP_EVENT_DTIM      = 0x02, /* Wake on every DTIM*/
+	CONF_WAKE_UP_EVENT_N_DTIM    = 0x04, /* Wake every Nth DTIM */
+	CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
+	CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
+};
+
+#define CONF_MAX_BCN_FILT_IE_COUNT 32
+
+#define CONF_BCN_RULE_PASS_ON_CHANGE         BIT(0)
+#define CONF_BCN_RULE_PASS_ON_APPEARANCE     BIT(1)
+
+#define CONF_BCN_IE_OUI_LEN    3
+#define CONF_BCN_IE_VER_LEN    2
+
+struct conf_bcn_filt_rule {
+	/*
+	 * IE number to which to associate a rule.
+	 *
+	 * Range: u8
+	 */
+	u8 ie;
+
+	/*
+	 * Rule to associate with the specific ie.
+	 *
+	 * Range: CONF_BCN_RULE_PASS_ON_*
+	 */
+	u8 rule;
+
+	/*
+	 * OUI for the vendor specifie IE (221)
+	 */
+	u8 oui[CONF_BCN_IE_OUI_LEN];
+
+	/*
+	 * Type for the vendor specifie IE (221)
+	 */
+	u8 type;
+
+	/*
+	 * Version for the vendor specifie IE (221)
+	 */
+	u8 version[CONF_BCN_IE_VER_LEN];
+};
+
+#define CONF_MAX_RSSI_SNR_TRIGGERS 8
+
+enum {
+	CONF_TRIG_METRIC_RSSI_BEACON = 0,
+	CONF_TRIG_METRIC_RSSI_DATA,
+	CONF_TRIG_METRIC_SNR_BEACON,
+	CONF_TRIG_METRIC_SNR_DATA
+};
+
+enum {
+	CONF_TRIG_EVENT_TYPE_LEVEL = 0,
+	CONF_TRIG_EVENT_TYPE_EDGE
+};
+
+enum {
+	CONF_TRIG_EVENT_DIR_LOW = 0,
+	CONF_TRIG_EVENT_DIR_HIGH,
+	CONF_TRIG_EVENT_DIR_BIDIR
+};
+
+
+struct conf_sig_trigger {
+	/*
+	 * The RSSI / SNR threshold value.
+	 *
+	 * FIXME: what is the range?
+	 */
+	s16 threshold;
+
+	/*
+	 * Minimum delay between two trigger events for this trigger in ms.
+	 *
+	 * Range: 0 - 60000
+	 */
+	u16 pacing;
+
+	/*
+	 * The measurement data source for this trigger.
+	 *
+	 * Range: CONF_TRIG_METRIC_*
+	 */
+	u8 metric;
+
+	/*
+	 * The trigger type of this trigger.
+	 *
+	 * Range: CONF_TRIG_EVENT_TYPE_*
+	 */
+	u8 type;
+
+	/*
+	 * The direction of the trigger.
+	 *
+	 * Range: CONF_TRIG_EVENT_DIR_*
+	 */
+	u8 direction;
+
+	/*
+	 * Hysteresis range of the trigger around the threshold (in dB)
+	 *
+	 * Range: u8
+	 */
+	u8 hysteresis;
+
+	/*
+	 * Index of the trigger rule.
+	 *
+	 * Range: 0 - CONF_MAX_RSSI_SNR_TRIGGERS-1
+	 */
+	u8 index;
+
+	/*
+	 * Enable / disable this rule (to use for clearing rules.)
+	 *
+	 * Range: 1 - Enabled, 2 - Not enabled
+	 */
+	u8 enable;
+};
+
+struct conf_sig_weights {
+
+	/*
+	 * RSSI from beacons average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 rssi_bcn_avg_weight;
+
+	/*
+	 * RSSI from data average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 rssi_pkt_avg_weight;
+
+	/*
+	 * SNR from beacons average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 snr_bcn_avg_weight;
+
+	/*
+	 * SNR from data average weight.
+	 *
+	 * Range: u8
+	 */
+	u8 snr_pkt_avg_weight;
+};
+
+enum conf_bcn_filt_mode {
+	CONF_BCN_FILT_MODE_DISABLED = 0,
+	CONF_BCN_FILT_MODE_ENABLED = 1
+};
+
+enum conf_bet_mode {
+	CONF_BET_MODE_DISABLE = 0,
+	CONF_BET_MODE_ENABLE = 1,
+};
+
+struct conf_conn_settings {
+	/*
+	 * Firmware wakeup conditions configuration. The host may set only
+	 * one bit.
+	 *
+	 * Range: CONF_WAKE_UP_EVENT_*
+	 */
+	u8 wake_up_event;
+
+	/*
+	 * Listen interval for beacons or Dtims.
+	 *
+	 * Range: 0 for beacon and Dtim wakeup
+	 *        1-10 for x Dtims
+	 *        1-255 for x beacons
+	 */
+	u8 listen_interval;
+
+	/*
+	 * Enable or disable the beacon filtering.
+	 *
+	 * Range: CONF_BCN_FILT_MODE_*
+	 */
+	enum conf_bcn_filt_mode bcn_filt_mode;
+
+	/*
+	 * Configure Beacon filter pass-thru rules.
+	 */
+	u8 bcn_filt_ie_count;
+	struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
+
+	/*
+	 * The number of consequtive beacons to lose, before the firmware
+	 * becomes out of synch.
+	 *
+	 * Range: u32
+	 */
+	u32 synch_fail_thold;
+
+	/*
+	 * After out-of-synch, the number of TU's to wait without a further
+	 * received beacon (or probe response) before issuing the BSS_EVENT_LOSE
+	 * event.
+	 *
+	 * Range: u32
+	 */
+	u32 bss_lose_timeout;
+
+	/*
+	 * Beacon receive timeout.
+	 *
+	 * Range: u32
+	 */
+	u32 beacon_rx_timeout;
+
+	/*
+	 * Broadcast receive timeout.
+	 *
+	 * Range: u32
+	 */
+	u32 broadcast_timeout;
+
+	/*
+	 * Enable/disable reception of broadcast packets in power save mode
+	 *
+	 * Range: 1 - enable, 0 - disable
+	 */
+	u8 rx_broadcast_in_ps;
+
+	/*
+	 * Consequtive PS Poll failures before sending event to driver
+	 *
+	 * Range: u8
+	 */
+	u8 ps_poll_threshold;
+
+	/*
+	 * Configuration of signal (rssi/snr) triggers.
+	 */
+	u8 sig_trigger_count;
+	struct conf_sig_trigger sig_trigger[CONF_MAX_RSSI_SNR_TRIGGERS];
+
+	/*
+	 * Configuration of signal average weights.
+	 */
+	struct conf_sig_weights sig_weights;
+
+	/*
+	 * Specifies if beacon early termination procedure is enabled or
+	 * disabled.
+	 *
+	 * Range: CONF_BET_MODE_*
+	 */
+	u8 bet_enable;
+
+	/*
+	 * Specifies the maximum number of consecutive beacons that may be
+	 * early terminated. After this number is reached at least one full
+	 * beacon must be correctly received in FW before beacon ET
+	 * resumes.
+	 *
+	 * Range 0 - 255
+	 */
+	u8 bet_max_consecutive;
+};
+
+#define CONF_SR_ERR_TBL_MAX_VALUES   14
+
+struct conf_mart_reflex_err_table {
+	/*
+	 * Length of the error table values table.
+	 *
+	 * Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
+	 */
+	u8 len;
+
+	/*
+	 * Smart Reflex error table upper limit.
+	 *
+	 * Range: s8
+	 */
+	s8 upper_limit;
+
+	/*
+	 * Smart Reflex error table values.
+	 *
+	 * Range: s8
+	 */
+	s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
+};
+
+enum {
+	CONF_REF_CLK_19_2_E,
+	CONF_REF_CLK_26_E,
+	CONF_REF_CLK_38_4_E,
+	CONF_REF_CLK_52_E
+};
+
+enum single_dual_band_enum {
+	CONF_SINGLE_BAND,
+	CONF_DUAL_BAND
+};
+
+struct conf_general_parms {
+	/*
+	 * RF Reference Clock type / speed
+	 *
+	 * Range: CONF_REF_CLK_*
+	 */
+	u8 ref_clk;
+
+	/*
+	 * Settling time of the reference clock after boot.
+	 *
+	 * Range: u8
+	 */
+	u8 settling_time;
+
+	/*
+	 * Flag defining whether clock is valid on wakeup.
+	 *
+	 * Range: 0 - not valid on wakeup, 1 - valid on wakeup
+	 */
+	u8 clk_valid_on_wakeup;
+
+	/*
+	 * DC-to-DC mode.
+	 *
+	 * Range: Unknown
+	 */
+	u8 dc2dcmode;
+
+	/*
+	 * Flag defining whether used as single or dual-band.
+	 *
+	 * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
+	 */
+	u8 single_dual_band;
+
+	/*
+	 * TX bip fem autodetect flag.
+	 *
+	 * Range: Unknown
+	 */
+	u8 tx_bip_fem_autodetect;
+
+	/*
+	 * TX bip gem manufacturer.
+	 *
+	 * Range: Unknown
+	 */
+	u8 tx_bip_fem_manufacturer;
+
+	/*
+	 * Settings flags.
+	 *
+	 * Range: Unknown
+	 */
+	u8 settings;
+};
+
+#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
+#define CONF_NUMBER_OF_SUB_BANDS_5  7
+#define CONF_NUMBER_OF_RATE_GROUPS  6
+#define CONF_NUMBER_OF_CHANNELS_2_4 14
+#define CONF_NUMBER_OF_CHANNELS_5   35
+
+struct conf_radio_parms {
+	/*
+	 * Static radio parameters for 2.4GHz
+	 *
+	 * Range: unknown
+	 */
+	u8 rx_trace_loss;
+	u8 tx_trace_loss;
+	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/*
+	 * Static radio parameters for 5GHz
+	 *
+	 * Range: unknown
+	 */
+	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
+
+	/*
+	 * Dynamic radio parameters for 2.4GHz
+	 *
+	 * Range: unknown
+	 */
+	s16 tx_ref_pd_voltage;
+	s8  tx_ref_power;
+	s8  tx_offset_db;
+
+	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
+
+	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
+	u8  rx_fem_insertion_loss;
+
+	/*
+	 * Dynamic radio parameters for 5GHz
+	 *
+	 * Range: unknown
+	 */
+	s16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
+
+	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
+
+	/* FIXME: this is inconsistent with the types for 2.4GHz */
+	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+};
+
+#define CONF_SR_ERR_TBL_COUNT        3
+
+struct conf_init_settings {
+	/*
+	 * Configure Smart Reflex error table values.
+	 */
+	struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
+
+	/*
+	 * Smart Reflex enable flag.
+	 *
+	 * Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
+	 */
+	u8 sr_enable;
+
+	/*
+	 * Configure general parameters.
+	 */
+	struct conf_general_parms genparam;
+
+	/*
+	 * Configure radio parameters.
+	 */
+	struct conf_radio_parms radioparam;
+
+};
+
+struct conf_drv_settings {
+	struct conf_sg_settings sg;
+	struct conf_rx_settings rx;
+	struct conf_tx_settings tx;
+	struct conf_conn_settings conn;
+	struct conf_init_settings init;
+};
+
+#endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.c b/drivers/net/wireless/wl12xx/wl1271_event.c
index f3afd4a..31d396b 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.c
+++ b/drivers/net/wireless/wl12xx/wl1271_event.c
@@ -26,20 +26,45 @@
 #include "wl1271_spi.h"
 #include "wl1271_event.h"
 #include "wl1271_ps.h"
+#include "wl12xx_80211.h"
 
 static int wl1271_event_scan_complete(struct wl1271 *wl,
 				      struct event_mailbox *mbox)
 {
+	int size = sizeof(struct wl12xx_probe_req_template);
 	wl1271_debug(DEBUG_EVENT, "status: 0x%x",
 		     mbox->scheduled_scan_status);
 
 	if (wl->scanning) {
-		mutex_unlock(&wl->mutex);
-		ieee80211_scan_completed(wl->hw, false);
-		mutex_lock(&wl->mutex);
-		wl->scanning = false;
-	}
+		if (wl->scan.state == WL1271_SCAN_BAND_DUAL) {
+			wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_2_4,
+						NULL, size);
+			/* 2.4 GHz band scanned, scan 5 GHz band, pretend
+			 * to the wl1271_cmd_scan function that we are not
+			 * scanning as it checks that.
+			 */
+			wl->scanning = false;
+			wl1271_cmd_scan(wl, wl->scan.ssid, wl->scan.ssid_len,
+						wl->scan.active,
+						wl->scan.high_prio,
+						WL1271_SCAN_BAND_5_GHZ,
+						wl->scan.probe_requests);
+		} else {
+			if (wl->scan.state == WL1271_SCAN_BAND_2_4_GHZ)
+				wl1271_cmd_template_set(wl,
+						CMD_TEMPL_CFG_PROBE_REQ_2_4,
+						NULL, size);
+			else
+				wl1271_cmd_template_set(wl,
+						CMD_TEMPL_CFG_PROBE_REQ_5,
+						NULL, size);
 
+			mutex_unlock(&wl->mutex);
+			ieee80211_scan_completed(wl->hw, false);
+			mutex_lock(&wl->mutex);
+			wl->scanning = false;
+		}
+	}
 	return 0;
 }
 
@@ -57,7 +82,8 @@
 
 	wl1271_event_mbox_dump(mbox);
 
-	vector = mbox->events_vector & ~(mbox->events_mask);
+	vector = le32_to_cpu(mbox->events_vector);
+	vector &= ~(le32_to_cpu(mbox->events_mask));
 	wl1271_debug(DEBUG_EVENT, "vector: 0x%x", vector);
 
 	if (vector & SCAN_COMPLETE_EVENT_ID) {
@@ -66,14 +92,16 @@
 			return ret;
 	}
 
-	if (vector & BSS_LOSE_EVENT_ID) {
+	/*
+	 * The BSS_LOSE_EVENT_ID is only needed while psm (and hence beacon
+	 * filtering) is enabled. Without PSM, the stack will receive all
+	 * beacons and can detect beacon loss by itself.
+	 */
+	if (vector & BSS_LOSE_EVENT_ID && wl->psm) {
 		wl1271_debug(DEBUG_EVENT, "BSS_LOSE_EVENT");
 
-		if (wl->psm_requested && wl->psm) {
-			ret = wl1271_ps_set_mode(wl, STATION_ACTIVE_MODE);
-			if (ret < 0)
-				return ret;
-		}
+		/* indicate to the stack, that beacons have been lost */
+		ieee80211_beacon_loss(wl->vif);
 	}
 
 	return 0;
@@ -92,14 +120,14 @@
 
 void wl1271_event_mbox_config(struct wl1271 *wl)
 {
-	wl->mbox_ptr[0] = wl1271_reg_read32(wl, REG_EVENT_MAILBOX_PTR);
+	wl->mbox_ptr[0] = wl1271_spi_read32(wl, REG_EVENT_MAILBOX_PTR);
 	wl->mbox_ptr[1] = wl->mbox_ptr[0] + sizeof(struct event_mailbox);
 
 	wl1271_debug(DEBUG_EVENT, "MBOX ptrs: 0x%x 0x%x",
 		     wl->mbox_ptr[0], wl->mbox_ptr[1]);
 }
 
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num)
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox_num, bool do_ack)
 {
 	struct event_mailbox mbox;
 	int ret;
@@ -110,8 +138,8 @@
 		return -EINVAL;
 
 	/* first we read the mbox descriptor */
-	wl1271_spi_mem_read(wl, wl->mbox_ptr[mbox_num], &mbox,
-			    sizeof(struct event_mailbox));
+	wl1271_spi_read(wl, wl->mbox_ptr[mbox_num], &mbox,
+			sizeof(struct event_mailbox), false);
 
 	/* process the descriptor */
 	ret = wl1271_event_process(wl, &mbox);
@@ -119,7 +147,9 @@
 		return ret;
 
 	/* then we let the firmware know it can go on...*/
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_EVENT_ACK);
+	if (do_ack)
+		wl1271_spi_write32(wl, ACX_REG_INTERRUPT_TRIG,
+				   INTR_TRIG_EVENT_ACK);
 
 	return 0;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_event.h b/drivers/net/wireless/wl12xx/wl1271_event.h
index 2cdce7c..3ab53d3 100644
--- a/drivers/net/wireless/wl12xx/wl1271_event.h
+++ b/drivers/net/wireless/wl12xx/wl1271_event.h
@@ -66,33 +66,33 @@
 struct event_debug_report {
 	u8 debug_event_id;
 	u8 num_params;
-	u16 pad;
-	u32 report_1;
-	u32 report_2;
-	u32 report_3;
+	__le16 pad;
+	__le32 report_1;
+	__le32 report_2;
+	__le32 report_3;
 } __attribute__ ((packed));
 
 #define NUM_OF_RSSI_SNR_TRIGGERS 8
 
 struct event_mailbox {
-	u32 events_vector;
-	u32 events_mask;
-	u32 reserved_1;
-	u32 reserved_2;
+	__le32 events_vector;
+	__le32 events_mask;
+	__le32 reserved_1;
+	__le32 reserved_2;
 
 	u8 dbg_event_id;
 	u8 num_relevant_params;
-	u16 reserved_3;
-	u32 event_report_p1;
-	u32 event_report_p2;
-	u32 event_report_p3;
+	__le16 reserved_3;
+	__le32 event_report_p1;
+	__le32 event_report_p2;
+	__le32 event_report_p3;
 
 	u8 number_of_scan_results;
 	u8 scan_tag;
 	u8 reserved_4[2];
-	u32 compl_scheduled_scan_status;
+	__le32 compl_scheduled_scan_status;
 
-	u16 scheduled_scan_attended_channels;
+	__le16 scheduled_scan_attended_channels;
 	u8 soft_gemini_sense_info;
 	u8 soft_gemini_protective_info;
 	s8 rssi_snr_trigger_metric[NUM_OF_RSSI_SNR_TRIGGERS];
@@ -105,6 +105,6 @@
 
 int wl1271_event_unmask(struct wl1271 *wl);
 void wl1271_event_mbox_config(struct wl1271 *wl);
-int wl1271_event_handle(struct wl1271 *wl, u8 mbox);
+int wl1271_event_handle(struct wl1271 *wl, u8 mbox, bool do_ack);
 
 #endif
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c
index 490df21..417b415 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.c
+++ b/drivers/net/wireless/wl12xx/wl1271_init.c
@@ -59,6 +59,14 @@
 	if (ret < 0)
 		return ret;
 
+	if (wl1271_11a_enabled()) {
+		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_CFG_PROBE_REQ_5,
+				NULL,
+				sizeof(struct wl12xx_probe_req_template));
+		if (ret < 0)
+			return ret;
+	}
+
 	ret = wl1271_cmd_template_set(wl, CMD_TEMPL_NULL_DATA, NULL,
 				      sizeof(struct wl12xx_null_data_template));
 	if (ret < 0)
@@ -94,7 +102,7 @@
 {
 	int ret;
 
-	ret = wl1271_acx_rx_msdu_life_time(wl, RX_MSDU_LIFETIME_DEF);
+	ret = wl1271_acx_rx_msdu_life_time(wl);
 	if (ret < 0)
 		return ret;
 
@@ -117,7 +125,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_group_address_tbl(wl);
+	ret = wl1271_acx_group_address_tbl(wl, true, NULL, 0);
 	if (ret < 0)
 		return ret;
 
@@ -125,7 +133,7 @@
 	if (ret < 0)
 		return ret;
 
-	ret = wl1271_acx_rts_threshold(wl, RTS_THRESHOLD_DEF);
+	ret = wl1271_acx_rts_threshold(wl, wl->conf.rx.rts_threshold);
 	if (ret < 0)
 		return ret;
 
@@ -136,7 +144,8 @@
 {
 	int ret;
 
-	ret = wl1271_acx_beacon_filter_opt(wl);
+	/* disable beacon filtering at this stage */
+	ret = wl1271_acx_beacon_filter_opt(wl, false);
 	if (ret < 0)
 		return ret;
 
@@ -187,6 +196,7 @@
 static int wl1271_init_general_parms(struct wl1271 *wl)
 {
 	struct wl1271_general_parms *gen_parms;
+	struct conf_general_parms *g = &wl->conf.init.genparam;
 	int ret;
 
 	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
@@ -195,15 +205,14 @@
 
 	gen_parms->id = TEST_CMD_INI_FILE_GENERAL_PARAM;
 
-	gen_parms->ref_clk = REF_CLK_38_4_E;
-	/* FIXME: magic numbers */
-	gen_parms->settling_time = 5;
-	gen_parms->clk_valid_on_wakeup = 0;
-	gen_parms->dc2dcmode = 0;
-	gen_parms->single_dual_band = 0;
-	gen_parms->tx_bip_fem_autodetect = 1;
-	gen_parms->tx_bip_fem_manufacturer = 1;
-	gen_parms->settings = 1;
+	gen_parms->ref_clk = g->ref_clk;
+	gen_parms->settling_time = g->settling_time;
+	gen_parms->clk_valid_on_wakeup = g->clk_valid_on_wakeup;
+	gen_parms->dc2dcmode = g->dc2dcmode;
+	gen_parms->single_dual_band = g->single_dual_band;
+	gen_parms->tx_bip_fem_autodetect = g->tx_bip_fem_autodetect;
+	gen_parms->tx_bip_fem_manufacturer = g->tx_bip_fem_manufacturer;
+	gen_parms->settings = g->settings;
 
 	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), 0);
 	if (ret < 0) {
@@ -217,32 +226,9 @@
 
 static int wl1271_init_radio_parms(struct wl1271 *wl)
 {
-	/*
-	 * FIXME: All these magic numbers should be moved to some place where
-	 * they can be configured (separate file?)
-	 */
-
 	struct wl1271_radio_parms *radio_parms;
-	int ret;
-	u8 compensation[] = { 0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8, 0xfc, 0x00,
-			      0x08, 0x10, 0xf0, 0xf8, 0x00, 0x0a, 0x14 };
-
-	u8 tx_rate_limits_normal[]   = { 0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 };
-	u8 tx_rate_limits_degraded[] = { 0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 };
-
-	u8 tx_channel_limits_11b[] = { 0x22, 0x50, 0x50, 0x50,
-				       0x50, 0x50, 0x50, 0x50,
-				       0x50, 0x50, 0x22, 0x50,
-				       0x22, 0x50 };
-
-	u8 tx_channel_limits_ofdm[] = { 0x20, 0x50, 0x50, 0x50,
-					0x50, 0x50, 0x50, 0x50,
-					0x50, 0x50, 0x20, 0x50,
-					0x20, 0x50 };
-
-	u8 tx_pdv_rate_offsets[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
-
-	u8 tx_ibias[] = { 0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 };
+	struct conf_radio_parms *r = &wl->conf.init.radioparam;
+	int i, ret;
 
 	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
 	if (!radio_parms)
@@ -251,33 +237,59 @@
 	radio_parms->id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
 	/* Static radio parameters */
-	radio_parms->rx_trace_loss = 10;
-	radio_parms->tx_trace_loss = 10;
-	memcpy(radio_parms->rx_rssi_and_proc_compens, compensation,
-	       sizeof(compensation));
+	radio_parms->rx_trace_loss = r->rx_trace_loss;
+	radio_parms->tx_trace_loss = r->tx_trace_loss;
+	memcpy(radio_parms->rx_rssi_and_proc_compens,
+	       r->rx_rssi_and_proc_compens,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
 
-	/* We don't set the 5GHz -- N/A */
+	memcpy(radio_parms->rx_trace_loss_5, r->rx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_trace_loss_5, r->tx_trace_loss_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->rx_rssi_and_proc_compens_5,
+	       r->rx_rssi_and_proc_compens_5,
+	       CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE);
 
 	/* Dynamic radio parameters */
-	radio_parms->tx_ref_pd_voltage = cpu_to_le16(0x24e);
-	radio_parms->tx_ref_power = 0x78;
-	radio_parms->tx_offset_db = 0x0;
+	radio_parms->tx_ref_pd_voltage = cpu_to_le16(r->tx_ref_pd_voltage);
+	radio_parms->tx_ref_power = r->tx_ref_power;
+	radio_parms->tx_offset_db = r->tx_offset_db;
 
-	memcpy(radio_parms->tx_rate_limits_normal, tx_rate_limits_normal,
-	       sizeof(tx_rate_limits_normal));
-	memcpy(radio_parms->tx_rate_limits_degraded, tx_rate_limits_degraded,
-	       sizeof(tx_rate_limits_degraded));
+	memcpy(radio_parms->tx_rate_limits_normal, r->tx_rate_limits_normal,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded, r->tx_rate_limits_degraded,
+	       CONF_NUMBER_OF_RATE_GROUPS);
 
-	memcpy(radio_parms->tx_channel_limits_11b, tx_channel_limits_11b,
-	       sizeof(tx_channel_limits_11b));
-	memcpy(radio_parms->tx_channel_limits_ofdm, tx_channel_limits_ofdm,
-	       sizeof(tx_channel_limits_ofdm));
-	memcpy(radio_parms->tx_pdv_rate_offsets, tx_pdv_rate_offsets,
-	       sizeof(tx_pdv_rate_offsets));
-	memcpy(radio_parms->tx_ibias, tx_ibias,
-	       sizeof(tx_ibias));
+	memcpy(radio_parms->tx_channel_limits_11b, r->tx_channel_limits_11b,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_channel_limits_ofdm, r->tx_channel_limits_ofdm,
+	       CONF_NUMBER_OF_CHANNELS_2_4);
+	memcpy(radio_parms->tx_pdv_rate_offsets, r->tx_pdv_rate_offsets,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias, r->tx_ibias, CONF_NUMBER_OF_RATE_GROUPS);
 
-	radio_parms->rx_fem_insertion_loss = 0x14;
+	radio_parms->rx_fem_insertion_loss = r->rx_fem_insertion_loss;
+
+	for (i = 0; i < CONF_NUMBER_OF_SUB_BANDS_5; i++)
+		radio_parms->tx_ref_pd_voltage_5[i] =
+			cpu_to_le16(r->tx_ref_pd_voltage_5[i]);
+	memcpy(radio_parms->tx_ref_power_5, r->tx_ref_power_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_offset_db_5, r->tx_offset_db_5,
+	       CONF_NUMBER_OF_SUB_BANDS_5);
+	memcpy(radio_parms->tx_rate_limits_normal_5,
+	       r->tx_rate_limits_normal_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_rate_limits_degraded_5,
+	       r->tx_rate_limits_degraded_5, CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_channel_limits_ofdm_5,
+	       r->tx_channel_limits_ofdm_5, CONF_NUMBER_OF_CHANNELS_5);
+	memcpy(radio_parms->tx_pdv_rate_offsets_5, r->tx_pdv_rate_offsets_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->tx_ibias_5, r->tx_ibias_5,
+	       CONF_NUMBER_OF_RATE_GROUPS);
+	memcpy(radio_parms->rx_fem_insertion_loss_5,
+	       r->rx_fem_insertion_loss_5, CONF_NUMBER_OF_SUB_BANDS_5);
 
 	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
 	if (ret < 0)
@@ -311,8 +323,8 @@
 
 	/* RX config */
 	ret = wl1271_init_rx_config(wl,
-				       RX_CFG_PROMISCUOUS | RX_CFG_TSF,
-				       RX_FILTER_OPTION_DEF);
+				    RX_CFG_PROMISCUOUS | RX_CFG_TSF,
+				    RX_FILTER_OPTION_DEF);
 	/* RX_CONFIG_OPTION_ANY_DST_ANY_BSS,
 	   RX_FILTER_OPTION_FILTER_ALL); */
 	if (ret < 0)
@@ -323,6 +335,11 @@
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* Initialize connection monitoring thresholds */
+	ret = wl1271_acx_conn_monit_params(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	/* Beacon filtering */
 	ret = wl1271_init_beacon_filter(wl);
 	if (ret < 0)
@@ -369,7 +386,7 @@
 		goto out_free_memmap;
 
 	/* Configure TX rate classes */
-	ret = wl1271_acx_rate_policies(wl);
+	ret = wl1271_acx_rate_policies(wl, CONF_TX_RATE_MASK_ALL);
 	if (ret < 0)
 		goto out_free_memmap;
 
@@ -388,10 +405,16 @@
 	if (ret < 0)
 		goto out_free_memmap;
 
+	/* Configure smart reflex */
+	ret = wl1271_acx_smart_reflex(wl);
+	if (ret < 0)
+		goto out_free_memmap;
+
 	return 0;
 
  out_free_memmap:
 	kfree(wl->target_mem_map);
+	wl->target_mem_map = NULL;
 
 	return ret;
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_init.h b/drivers/net/wireless/wl12xx/wl1271_init.h
index bd8ff0f..6e21cee 100644
--- a/drivers/net/wireless/wl12xx/wl1271_init.h
+++ b/drivers/net/wireless/wl12xx/wl1271_init.h
@@ -48,19 +48,6 @@
 	u8 settings;
 } __attribute__ ((packed));
 
-enum ref_clk_enum {
-	REF_CLK_19_2_E,
-	REF_CLK_26_E,
-	REF_CLK_38_4_E,
-	REF_CLK_52_E
-};
-
-#define RSSI_AND_PROCESS_COMPENSATION_SIZE 15
-#define NUMBER_OF_SUB_BANDS_5  7
-#define NUMBER_OF_RATE_GROUPS  6
-#define NUMBER_OF_CHANNELS_2_4 14
-#define NUMBER_OF_CHANNELS_5   35
-
 struct wl1271_radio_parms {
 	u8 id;
 	u8 padding[3];
@@ -69,45 +56,45 @@
 	/* 2.4GHz */
 	u8 rx_trace_loss;
 	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
 
 	/* 5GHz */
-	u8 rx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[RSSI_AND_PROCESS_COMPENSATION_SIZE];
+	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
 
 	/* Dynamic radio parameters */
 	/* 2.4GHz */
-	s16 tx_ref_pd_voltage;
+	__le16 tx_ref_pd_voltage;
 	s8  tx_ref_power;
 	s8  tx_offset_db;
 
-	s8  tx_rate_limits_normal[NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
 
-	s8  tx_channel_limits_11b[NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[NUMBER_OF_RATE_GROUPS];
+	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
+	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
 
-	u8  tx_ibias[NUMBER_OF_RATE_GROUPS];
+	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
 	u8  rx_fem_insertion_loss;
 
 	u8 padding2;
 
 	/* 5GHz */
-	s16 tx_ref_pd_voltage_5[NUMBER_OF_SUB_BANDS_5];
-	s8  tx_ref_power_5[NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[NUMBER_OF_SUB_BANDS_5];
+	__le16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
+	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
 
-	s8  tx_rate_limits_normal_5[NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
 
-	s8  tx_channel_limits_ofdm_5[NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[NUMBER_OF_RATE_GROUPS];
+	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
+	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
 
 	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[NUMBER_OF_SUB_BANDS_5];
+	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
+	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
 
 	u8 padding3[2];
 } __attribute__ ((packed));
diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 27298b1..86132bb 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -30,7 +30,9 @@
 #include <linux/spi/spi.h>
 #include <linux/crc32.h>
 #include <linux/etherdevice.h>
+#include <linux/vmalloc.h>
 #include <linux/spi/wl12xx.h>
+#include <linux/inetdevice.h>
 
 #include "wl1271.h"
 #include "wl12xx_80211.h"
@@ -45,6 +47,308 @@
 #include "wl1271_cmd.h"
 #include "wl1271_boot.h"
 
+static struct conf_drv_settings default_conf = {
+	.sg = {
+		.per_threshold               = 7500,
+		.max_scan_compensation_time  = 120000,
+		.nfs_sample_interval         = 400,
+		.load_ratio                  = 50,
+		.auto_ps_mode                = 0,
+		.probe_req_compensation      = 170,
+		.scan_window_compensation    = 50,
+		.antenna_config              = 0,
+		.beacon_miss_threshold       = 60,
+		.rate_adaptation_threshold   = CONF_HW_BIT_RATE_12MBPS,
+		.rate_adaptation_snr         = 0
+	},
+	.rx = {
+		.rx_msdu_life_time           = 512000,
+		.packet_detection_threshold  = 0,
+		.ps_poll_timeout             = 15,
+		.upsd_timeout                = 15,
+		.rts_threshold               = 2347,
+		.rx_cca_threshold            = 0xFFEF,
+		.irq_blk_threshold           = 0,
+		.irq_pkt_threshold           = USHORT_MAX,
+		.irq_timeout                 = 5,
+		.queue_type                  = CONF_RX_QUEUE_TYPE_LOW_PRIORITY,
+	},
+	.tx = {
+		.tx_energy_detection         = 0,
+		.rc_conf                     = {
+			.enabled_rates       = CONF_TX_RATE_MASK_UNSPECIFIED,
+			.short_retry_limit   = 10,
+			.long_retry_limit    = 10,
+			.aflags              = 0
+		},
+		.ac_conf_count               = 4,
+		.ac_conf                     = {
+			[0] = {
+				.ac          = CONF_TX_AC_BE,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = 3,
+				.tx_op_limit = 0,
+			},
+			[1] = {
+				.ac          = CONF_TX_AC_BK,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = 7,
+				.tx_op_limit = 0,
+			},
+			[2] = {
+				.ac          = CONF_TX_AC_VI,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = CONF_TX_AIFS_PIFS,
+				.tx_op_limit = 3008,
+			},
+			[3] = {
+				.ac          = CONF_TX_AC_VO,
+				.cw_min      = 15,
+				.cw_max      = 63,
+				.aifsn       = CONF_TX_AIFS_PIFS,
+				.tx_op_limit = 1504,
+			},
+		},
+		.tid_conf_count = 7,
+		.tid_conf = {
+			[0] = {
+				.queue_id    = 0,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[1] = {
+				.queue_id    = 1,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[2] = {
+				.queue_id    = 2,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[3] = {
+				.queue_id    = 3,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[4] = {
+				.queue_id    = 4,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[5] = {
+				.queue_id    = 5,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			},
+			[6] = {
+				.queue_id    = 6,
+				.channel_type = CONF_CHANNEL_TYPE_DCF,
+				.tsid        = CONF_TX_AC_BE,
+				.ps_scheme   = CONF_PS_SCHEME_LEGACY,
+				.ack_policy  = CONF_ACK_POLICY_LEGACY,
+				.apsd_conf   = {0, 0},
+			}
+		},
+		.frag_threshold              = IEEE80211_MAX_FRAG_THRESHOLD,
+		.tx_compl_timeout            = 5,
+		.tx_compl_threshold          = 5
+	},
+	.conn = {
+		.wake_up_event               = CONF_WAKE_UP_EVENT_DTIM,
+		.listen_interval             = 0,
+		.bcn_filt_mode               = CONF_BCN_FILT_MODE_ENABLED,
+		.bcn_filt_ie_count           = 1,
+		.bcn_filt_ie = {
+			[0] = {
+				.ie          = WLAN_EID_CHANNEL_SWITCH,
+				.rule        = CONF_BCN_RULE_PASS_ON_APPEARANCE,
+			}
+		},
+		.synch_fail_thold            = 5,
+		.bss_lose_timeout            = 100,
+		.beacon_rx_timeout           = 10000,
+		.broadcast_timeout           = 20000,
+		.rx_broadcast_in_ps          = 1,
+		.ps_poll_threshold           = 4,
+		.sig_trigger_count           = 2,
+		.sig_trigger = {
+			[0] = {
+				.threshold   = -75,
+				.pacing      = 500,
+				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
+				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
+				.direction   = CONF_TRIG_EVENT_DIR_LOW,
+				.hysteresis  = 2,
+				.index       = 0,
+				.enable      = 1
+			},
+			[1] = {
+				.threshold   = -75,
+				.pacing      = 500,
+				.metric      = CONF_TRIG_METRIC_RSSI_BEACON,
+				.type        = CONF_TRIG_EVENT_TYPE_EDGE,
+				.direction   = CONF_TRIG_EVENT_DIR_HIGH,
+				.hysteresis  = 2,
+				.index       = 1,
+				.enable      = 1
+			}
+		},
+		.sig_weights = {
+			.rssi_bcn_avg_weight = 10,
+			.rssi_pkt_avg_weight = 10,
+			.snr_bcn_avg_weight  = 10,
+			.snr_pkt_avg_weight  = 10
+		},
+		.bet_enable                  = CONF_BET_MODE_ENABLE,
+		.bet_max_consecutive         = 100
+	},
+	.init = {
+		.sr_err_tbl = {
+			[0] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
+					0x00 }
+			},
+			[1] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
+					0x00 }
+			},
+			[2] = {
+				.len         = 7,
+				.upper_limit = 0x03,
+				.values      = {
+					0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
+					0x00 }
+			}
+		},
+		.sr_enable                   = 1,
+		.genparam                    = {
+			/*
+			 * FIXME: The correct value CONF_REF_CLK_38_4_E
+			 *        causes the firmware to crash on boot.
+			 *        The value 5 apparently is an
+			 *        unnoficial XTAL configuration of the
+			 *        same frequency, which appears to work.
+			 */
+			.ref_clk             = 5,
+			.settling_time       = 5,
+			.clk_valid_on_wakeup = 0,
+			.dc2dcmode           = 0,
+			.single_dual_band    = CONF_SINGLE_BAND,
+			.tx_bip_fem_autodetect = 0,
+			.tx_bip_fem_manufacturer = 1,
+			.settings = 1,
+		},
+		.radioparam = {
+			.rx_trace_loss       = 10,
+			.tx_trace_loss       = 10,
+			.rx_rssi_and_proc_compens = {
+				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
+				0xfc, 0x00, 0x08, 0x10, 0xf0, 0xf8,
+				0x00, 0x0a, 0x14 },
+			.rx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
+			.tx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
+			.rx_rssi_and_proc_compens_5 = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+				0x00, 0x00, 0x00 },
+			.tx_ref_pd_voltage   = 0x24e,
+			.tx_ref_power        = 0x78,
+			.tx_offset_db        = 0x0,
+			.tx_rate_limits_normal = {
+				0x1e, 0x1f, 0x22, 0x24, 0x28, 0x29 },
+			.tx_rate_limits_degraded = {
+				0x1b, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
+			.tx_channel_limits_11b = {
+				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
+				0x22, 0x50 },
+			.tx_channel_limits_ofdm = {
+				0x20, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
+				0x20, 0x50 },
+			.tx_pdv_rate_offsets = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+			.tx_ibias            = {
+				0x1a, 0x1a, 0x1a, 0x1a, 0x1a, 0x27 },
+			.rx_fem_insertion_loss = 0x14,
+			.tx_ref_pd_voltage_5 = {
+				0x0190, 0x01a4, 0x01c3, 0x01d8,
+				0x020a, 0x021c },
+			.tx_ref_power_5      = {
+				0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 },
+			.tx_offset_db_5      = {
+				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
+			.tx_rate_limits_normal_5 = {
+				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+			.tx_rate_limits_degraded_5 = {
+				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
+			.tx_channel_limits_ofdm_5 = {
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
+				0x50, 0x50, 0x50 },
+			.tx_pdv_rate_offsets_5 = {
+				0x01, 0x02, 0x02, 0x02, 0x02, 0x00 },
+			.tx_ibias_5          = {
+				0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
+			.rx_fem_insertion_loss_5 = {
+				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 }
+		}
+	}
+};
+
+static LIST_HEAD(wl_list);
+
+static void wl1271_conf_init(struct wl1271 *wl)
+{
+
+	/*
+	 * This function applies the default configuration to the driver. This
+	 * function is invoked upon driver load (spi probe.)
+	 *
+	 * The configuration is stored in a run-time structure in order to
+	 * facilitate for run-time adjustment of any of the parameters. Making
+	 * changes to the configuration structure will apply the new values on
+	 * the next interface up (wl1271_op_start.)
+	 */
+
+	/* apply driver default configuration */
+	memcpy(&wl->conf, &default_conf, sizeof(default_conf));
+
+	if (wl1271_11a_enabled())
+		wl->conf.init.genparam.single_dual_band = CONF_DUAL_BAND;
+}
+
+
 static int wl1271_plt_init(struct wl1271 *wl)
 {
 	int ret;
@@ -75,20 +379,14 @@
 	wl->set_power(true);
 }
 
-static void wl1271_fw_status(struct wl1271 *wl, struct wl1271_fw_status *status)
+static void wl1271_fw_status(struct wl1271 *wl,
+			     struct wl1271_fw_status *status)
 {
 	u32 total = 0;
 	int i;
 
-	/*
-	 * FIXME: Reading the FW status directly from the registers seems to
-	 * be the right thing to do, but it doesn't work.  And in the
-	 * reference driver, there is a workaround called
-	 * USE_SDIO_24M_WORKAROUND, which reads the status from memory
-	 * instead, so we do the same here.
-	 */
-
-	wl1271_spi_mem_read(wl, STATUS_MEM_ADDRESS, status, sizeof(*status));
+	wl1271_spi_read(wl, FW_STATUS_ADDR, status,
+			sizeof(*status), false);
 
 	wl1271_debug(DEBUG_IRQ, "intr: 0x%x (fw_rx_counter = %d, "
 		     "drv_rx_counter = %d, tx_results_counter = %d)",
@@ -99,25 +397,28 @@
 
 	/* update number of available TX blocks */
 	for (i = 0; i < NUM_TX_QUEUES; i++) {
-		u32 cnt = status->tx_released_blks[i] - wl->tx_blocks_freed[i];
-		wl->tx_blocks_freed[i] = status->tx_released_blks[i];
+		u32 cnt = le32_to_cpu(status->tx_released_blks[i]) -
+			wl->tx_blocks_freed[i];
+
+		wl->tx_blocks_freed[i] =
+			le32_to_cpu(status->tx_released_blks[i]);
 		wl->tx_blocks_available += cnt;
 		total += cnt;
 	}
 
 	/* if more blocks are available now, schedule some tx work */
 	if (total && !skb_queue_empty(&wl->tx_queue))
-		schedule_work(&wl->tx_work);
+		ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/* update the host-chipset time offset */
-	wl->time_offset = jiffies_to_usecs(jiffies) - status->fw_localtime;
+	wl->time_offset = jiffies_to_usecs(jiffies) -
+		le32_to_cpu(status->fw_localtime);
 }
 
-#define WL1271_IRQ_MAX_LOOPS 10
 static void wl1271_irq_work(struct work_struct *work)
 {
-	u32 intr, ctr = WL1271_IRQ_MAX_LOOPS;
 	int ret;
+	u32 intr;
 	struct wl1271 *wl =
 		container_of(work, struct wl1271, irq_work);
 
@@ -132,9 +433,10 @@
 	if (ret < 0)
 		goto out;
 
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK, WL1271_ACX_INTR_ALL);
 
-	intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
+	wl1271_fw_status(wl, wl->fw_status);
+	intr = le32_to_cpu(wl->fw_status->intr);
 	if (!intr) {
 		wl1271_debug(DEBUG_IRQ, "Zero interrupt received.");
 		goto out_sleep;
@@ -142,46 +444,39 @@
 
 	intr &= WL1271_INTR_MASK;
 
-	do {
-		wl1271_fw_status(wl, wl->fw_status);
+	if (intr & WL1271_ACX_INTR_EVENT_A) {
+		bool do_ack = (intr & WL1271_ACX_INTR_EVENT_B) ? false : true;
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_A");
+		wl1271_event_handle(wl, 0, do_ack);
+	}
 
+	if (intr & WL1271_ACX_INTR_EVENT_B) {
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_EVENT_B");
+		wl1271_event_handle(wl, 1, true);
+	}
 
-		if (intr & (WL1271_ACX_INTR_EVENT_A |
-			    WL1271_ACX_INTR_EVENT_B)) {
-			wl1271_debug(DEBUG_IRQ,
-				     "WL1271_ACX_INTR_EVENT (0x%x)", intr);
-			if (intr & WL1271_ACX_INTR_EVENT_A)
-				wl1271_event_handle(wl, 0);
-			else
-				wl1271_event_handle(wl, 1);
-		}
+	if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
+		wl1271_debug(DEBUG_IRQ,
+			     "WL1271_ACX_INTR_INIT_COMPLETE");
 
-		if (intr & WL1271_ACX_INTR_INIT_COMPLETE)
-			wl1271_debug(DEBUG_IRQ,
-				     "WL1271_ACX_INTR_INIT_COMPLETE");
+	if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
 
-		if (intr & WL1271_ACX_INTR_HW_AVAILABLE)
-			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_HW_AVAILABLE");
+	if (intr & WL1271_ACX_INTR_DATA) {
+		u8 tx_res_cnt = wl->fw_status->tx_results_counter -
+			wl->tx_results_count;
 
-		if (intr & WL1271_ACX_INTR_DATA) {
-			u8 tx_res_cnt = wl->fw_status->tx_results_counter -
-				wl->tx_results_count;
+		wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
 
-			wl1271_debug(DEBUG_IRQ, "WL1271_ACX_INTR_DATA");
+		/* check for tx results */
+		if (tx_res_cnt)
+			wl1271_tx_complete(wl, tx_res_cnt);
 
-			/* check for tx results */
-			if (tx_res_cnt)
-				wl1271_tx_complete(wl, tx_res_cnt);
-
-			wl1271_rx(wl, wl->fw_status);
-		}
-
-		intr = wl1271_reg_read32(wl, ACX_REG_INTERRUPT_CLEAR);
-		intr &= WL1271_INTR_MASK;
-	} while (intr && --ctr);
+		wl1271_rx(wl, wl->fw_status);
+	}
 
 out_sleep:
-	wl1271_reg_write32(wl, ACX_REG_INTERRUPT_MASK,
+	wl1271_spi_write32(wl, ACX_REG_INTERRUPT_MASK,
 			   WL1271_ACX_INTR_ALL & ~(WL1271_INTR_MASK));
 	wl1271_ps_elp_sleep(wl);
 
@@ -205,7 +500,7 @@
 		wl->elp_compl = NULL;
 	}
 
-	schedule_work(&wl->irq_work);
+	ieee80211_queue_work(wl->hw, &wl->irq_work);
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
 	return IRQ_HANDLED;
@@ -231,7 +526,7 @@
 	}
 
 	wl->fw_len = fw->size;
-	wl->fw = kmalloc(wl->fw_len, GFP_KERNEL);
+	wl->fw = vmalloc(wl->fw_len);
 
 	if (!wl->fw) {
 		wl1271_error("could not allocate memory for the firmware");
@@ -292,7 +587,7 @@
 	u32 elp_reg;
 
 	elp_reg = ELPCTRL_WAKE_UP;
-	wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, elp_reg);
 }
 
 static int wl1271_setup(struct wl1271 *wl)
@@ -314,6 +609,7 @@
 
 static int wl1271_chip_wakeup(struct wl1271 *wl)
 {
+	struct wl1271_partition_set partition;
 	int ret = 0;
 
 	wl1271_power_on(wl);
@@ -323,11 +619,10 @@
 
 	/* We don't need a real memory partition here, because we only want
 	 * to use the registers at this point. */
-	wl1271_set_partition(wl,
-			     0x00000000,
-			     0x00000000,
-			     REGISTERS_BASE,
-			     REGISTERS_DOWN_SIZE);
+	memset(&partition, 0, sizeof(partition));
+	partition.reg.start = REGISTERS_BASE;
+	partition.reg.size = REGISTERS_DOWN_SIZE;
+	wl1271_set_partition(wl, &partition);
 
 	/* ELP module wake up */
 	wl1271_fw_wakeup(wl);
@@ -335,7 +630,7 @@
 	/* whal_FwCtrl_BootSm() */
 
 	/* 0. read chip id from CHIP_ID */
-	wl->chip.id = wl1271_reg_read32(wl, CHIP_ID_B);
+	wl->chip.id = wl1271_spi_read32(wl, CHIP_ID_B);
 
 	/* 1. check if chip id is valid */
 
@@ -346,7 +641,7 @@
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 		break;
 	case CHIP_ID_1271_PG20:
 		wl1271_debug(DEBUG_BOOT, "chip id 0x%x (1271 PG20)",
@@ -354,58 +649,36 @@
 
 		ret = wl1271_setup(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 		break;
 	default:
 		wl1271_error("unsupported chip id: 0x%x", wl->chip.id);
 		ret = -ENODEV;
-		goto out;
+		goto out_power_off;
 	}
 
 	if (wl->fw == NULL) {
 		ret = wl1271_fetch_firmware(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 	}
 
 	/* No NVS from netlink, try to get it from the filesystem */
 	if (wl->nvs == NULL) {
 		ret = wl1271_fetch_nvs(wl);
 		if (ret < 0)
-			goto out;
+			goto out_power_off;
 	}
 
+	goto out;
+
+out_power_off:
+	wl1271_power_off(wl);
+
 out:
 	return ret;
 }
 
-static void wl1271_filter_work(struct work_struct *work)
-{
-	struct wl1271 *wl =
-		container_of(work, struct wl1271, filter_work);
-	int ret;
-
-	mutex_lock(&wl->mutex);
-
-	if (wl->state == WL1271_STATE_OFF)
-		goto out;
-
-	ret = wl1271_ps_elp_wakeup(wl, false);
-	if (ret < 0)
-		goto out;
-
-	/* FIXME: replace the magic numbers with proper definitions */
-	ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-	if (ret < 0)
-		goto out_sleep;
-
-out_sleep:
-	wl1271_ps_elp_sleep(wl);
-
-out:
-	mutex_unlock(&wl->mutex);
-}
-
 int wl1271_plt_start(struct wl1271 *wl)
 {
 	int ret;
@@ -429,13 +702,26 @@
 
 	ret = wl1271_boot(wl);
 	if (ret < 0)
-		goto out;
+		goto out_power_off;
 
 	wl1271_notice("firmware booted in PLT mode (%s)", wl->chip.fw_ver);
 
 	ret = wl1271_plt_init(wl);
 	if (ret < 0)
-		goto out;
+		goto out_irq_disable;
+
+	/* Make sure power saving is disabled */
+	ret = wl1271_acx_sleep_auth(wl, WL1271_PSM_CAM);
+	if (ret < 0)
+		goto out_irq_disable;
+
+	goto out;
+
+out_irq_disable:
+	wl1271_disable_interrupts(wl);
+
+out_power_off:
+	wl1271_power_off(wl);
 
 out:
 	mutex_unlock(&wl->mutex);
@@ -462,6 +748,7 @@
 	wl1271_power_off(wl);
 
 	wl->state = WL1271_STATE_OFF;
+	wl->rx_counter = 0;
 
 out:
 	mutex_unlock(&wl->mutex);
@@ -481,7 +768,7 @@
 	 * before that, the tx_work will not be initialized!
 	 */
 
-	schedule_work(&wl->tx_work);
+	ieee80211_queue_work(wl->hw, &wl->tx_work);
 
 	/*
 	 * The workqueue is slow to process the tx_queue and we need stop
@@ -501,6 +788,93 @@
 	return NETDEV_TX_OK;
 }
 
+static int wl1271_dev_notify(struct notifier_block *me, unsigned long what,
+			     void *arg)
+{
+	struct net_device *dev;
+	struct wireless_dev *wdev;
+	struct wiphy *wiphy;
+	struct ieee80211_hw *hw;
+	struct wl1271 *wl;
+	struct wl1271 *wl_temp;
+	struct in_device *idev;
+	struct in_ifaddr *ifa = arg;
+	int ret = 0;
+
+	/* FIXME: this ugly function should probably be implemented in the
+	 * mac80211, and here should only be a simple callback handling actual
+	 * setting of the filters. Now we need to dig up references to
+	 * various structures to gain access to what we need.
+	 * Also, because of this, there is no "initial" setting of the filter
+	 * in "op_start", because we don't want to dig up struct net_device
+	 * there - the filter will be set upon first change of the interface
+	 * IP address. */
+
+	dev = ifa->ifa_dev->dev;
+
+	wdev = dev->ieee80211_ptr;
+	if (wdev == NULL)
+		return -ENODEV;
+
+	wiphy = wdev->wiphy;
+	if (wiphy == NULL)
+		return -ENODEV;
+
+	hw = wiphy_priv(wiphy);
+	if (hw == NULL)
+		return -ENODEV;
+
+	/* Check that the interface is one supported by this driver. */
+	wl_temp = hw->priv;
+	list_for_each_entry(wl, &wl_list, list) {
+		if (wl == wl_temp)
+			break;
+	}
+	if (wl == NULL)
+		return -ENODEV;
+
+	/* Get the interface IP address for the device. "ifa" will become
+	   NULL if:
+	     - there is no IPV4 protocol address configured
+	     - there are multiple (virtual) IPV4 addresses configured
+	   When "ifa" is NULL, filtering will be disabled.
+	*/
+	ifa = NULL;
+	idev = dev->ip_ptr;
+	if (idev)
+		ifa = idev->ifa_list;
+
+	if (ifa && ifa->ifa_next)
+		ifa = NULL;
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+	if (ifa)
+		ret = wl1271_acx_arp_ip_filter(wl, true,
+					       (u8 *)&ifa->ifa_address,
+					       ACX_IPV4_VERSION);
+	else
+		ret = wl1271_acx_arp_ip_filter(wl, false, NULL,
+					       ACX_IPV4_VERSION);
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
+
+	return ret;
+}
+
+static struct notifier_block wl1271_dev_notifier = {
+	.notifier_call = wl1271_dev_notify,
+};
+
+
 static int wl1271_op_start(struct ieee80211_hw *hw)
 {
 	struct wl1271 *wl = hw->priv;
@@ -523,22 +897,32 @@
 
 	ret = wl1271_boot(wl);
 	if (ret < 0)
-		goto out;
+		goto out_power_off;
 
 	ret = wl1271_hw_init(wl);
 	if (ret < 0)
-		goto out;
+		goto out_irq_disable;
 
 	wl->state = WL1271_STATE_ON;
 
 	wl1271_info("firmware booted (%s)", wl->chip.fw_ver);
 
-out:
-	if (ret < 0)
-		wl1271_power_off(wl);
+	goto out;
 
+out_irq_disable:
+	wl1271_disable_interrupts(wl);
+
+out_power_off:
+	wl1271_power_off(wl);
+
+out:
 	mutex_unlock(&wl->mutex);
 
+	if (!ret) {
+		list_add(&wl->list, &wl_list);
+		register_inetaddr_notifier(&wl1271_dev_notifier);
+	}
+
 	return ret;
 }
 
@@ -551,6 +935,9 @@
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 stop");
 
+	unregister_inetaddr_notifier(&wl1271_dev_notifier);
+	list_del(&wl->list);
+
 	mutex_lock(&wl->mutex);
 
 	WARN_ON(wl->state != WL1271_STATE_ON);
@@ -570,7 +957,6 @@
 
 	cancel_work_sync(&wl->irq_work);
 	cancel_work_sync(&wl->tx_work);
-	cancel_work_sync(&wl->filter_work);
 
 	mutex_lock(&wl->mutex);
 
@@ -581,8 +967,8 @@
 	memset(wl->bssid, 0, ETH_ALEN);
 	memset(wl->ssid, 0, IW_ESSID_MAX_SIZE + 1);
 	wl->ssid_len = 0;
-	wl->listen_int = 1;
 	wl->bss_type = MAX_BSS_TYPE;
+	wl->band = IEEE80211_BAND_2GHZ;
 
 	wl->rx_counter = 0;
 	wl->elp = false;
@@ -592,8 +978,13 @@
 	wl->tx_blocks_available = 0;
 	wl->tx_results_count = 0;
 	wl->tx_packets_count = 0;
+	wl->tx_security_last_seq = 0;
+	wl->tx_security_seq_16 = 0;
+	wl->tx_security_seq_32 = 0;
 	wl->time_offset = 0;
 	wl->session_counter = 0;
+	wl->joined = false;
+
 	for (i = 0; i < NUM_TX_QUEUES; i++)
 		wl->tx_blocks_freed[i] = 0;
 
@@ -611,6 +1002,12 @@
 		     conf->type, conf->mac_addr);
 
 	mutex_lock(&wl->mutex);
+	if (wl->vif) {
+		ret = -EBUSY;
+		goto out;
+	}
+
+	wl->vif = conf->vif;
 
 	switch (conf->type) {
 	case NL80211_IFTYPE_STATION:
@@ -634,7 +1031,12 @@
 static void wl1271_op_remove_interface(struct ieee80211_hw *hw,
 					 struct ieee80211_if_init_conf *conf)
 {
+	struct wl1271 *wl = hw->priv;
+
+	mutex_lock(&wl->mutex);
 	wl1271_debug(DEBUG_MAC80211, "mac80211 remove interface");
+	wl->vif = NULL;
+	mutex_unlock(&wl->mutex);
 }
 
 #if 0
@@ -657,7 +1059,15 @@
 	if (ret < 0)
 		goto out;
 
-	memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+	if (memcmp(wl->bssid, conf->bssid, ETH_ALEN)) {
+		wl1271_debug(DEBUG_MAC80211, "bssid changed");
+
+		memcpy(wl->bssid, conf->bssid, ETH_ALEN);
+
+		ret = wl1271_cmd_join(wl);
+		if (ret < 0)
+			goto out_sleep;
+	}
 
 	ret = wl1271_cmd_build_null_data(wl);
 	if (ret < 0)
@@ -667,13 +1077,6 @@
 	if (wl->ssid_len)
 		memcpy(wl->ssid, conf->ssid, wl->ssid_len);
 
-	if (wl->bss_type != BSS_TYPE_IBSS) {
-		/* FIXME: replace the magic numbers with proper definitions */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 5, 100, 1);
-		if (ret < 0)
-			goto out_sleep;
-	}
-
 	if (conf->changed & IEEE80211_IFCC_BEACON) {
 		beacon = ieee80211_beacon_get(hw, vif);
 		ret = wl1271_cmd_template_set(wl, CMD_TEMPL_BEACON,
@@ -691,12 +1094,6 @@
 
 		if (ret < 0)
 			goto out_sleep;
-
-		/* FIXME: replace the magic numbers with proper definitions */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-
-		if (ret < 0)
-			goto out_sleep;
 	}
 
 out_sleep:
@@ -724,20 +1121,20 @@
 
 	mutex_lock(&wl->mutex);
 
+	wl->band = conf->channel->band;
+
 	ret = wl1271_ps_elp_wakeup(wl, false);
 	if (ret < 0)
 		goto out;
 
 	if (channel != wl->channel) {
-		u8 old_channel = wl->channel;
+		/*
+		 * We assume that the stack will configure the right channel
+		 * before associating, so we don't need to send a join
+		 * command here.  We will join the right channel when the
+		 * BSSID changes
+		 */
 		wl->channel = channel;
-
-		/* FIXME: use beacon interval provided by mac80211 */
-		ret = wl1271_cmd_join(wl, wl->bss_type, 1, 100, 0);
-		if (ret < 0) {
-			wl->channel = old_channel;
-			goto out_sleep;
-		}
 	}
 
 	ret = wl1271_cmd_build_null_data(wl);
@@ -782,6 +1179,45 @@
 	return ret;
 }
 
+struct wl1271_filter_params {
+	bool enabled;
+	int mc_list_length;
+	u8 mc_list[ACX_MC_ADDRESS_GROUP_MAX][ETH_ALEN];
+};
+
+static u64 wl1271_op_prepare_multicast(struct ieee80211_hw *hw, int mc_count,
+				       struct dev_addr_list *mc_list)
+{
+	struct wl1271_filter_params *fp;
+	int i;
+
+	fp = kzalloc(sizeof(*fp), GFP_ATOMIC);
+	if (!fp) {
+		wl1271_error("Out of memory setting filters.");
+		return 0;
+	}
+
+	/* update multicast filtering parameters */
+	fp->enabled = true;
+	if (mc_count > ACX_MC_ADDRESS_GROUP_MAX) {
+		mc_count = 0;
+		fp->enabled = false;
+	}
+
+	fp->mc_list_length = 0;
+	for (i = 0; i < mc_count; i++) {
+		if (mc_list->da_addrlen == ETH_ALEN) {
+			memcpy(fp->mc_list[fp->mc_list_length],
+			       mc_list->da_addr, ETH_ALEN);
+			fp->mc_list_length++;
+		} else
+			wl1271_warning("Unknown mc address length.");
+		mc_list = mc_list->next;
+	}
+
+	return (u64)(unsigned long)fp;
+}
+
 #define WL1271_SUPPORTED_FILTERS (FIF_PROMISC_IN_BSS | \
 				  FIF_ALLMULTI | \
 				  FIF_FCSFAIL | \
@@ -791,28 +1227,53 @@
 
 static void wl1271_op_configure_filter(struct ieee80211_hw *hw,
 				       unsigned int changed,
-				       unsigned int *total,u64 multicast)
+				       unsigned int *total, u64 multicast)
 {
+	struct wl1271_filter_params *fp = (void *)(unsigned long)multicast;
 	struct wl1271 *wl = hw->priv;
+	int ret;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 configure filter");
 
+	mutex_lock(&wl->mutex);
+
+	if (wl->state == WL1271_STATE_OFF)
+		goto out;
+
+	ret = wl1271_ps_elp_wakeup(wl, false);
+	if (ret < 0)
+		goto out;
+
 	*total &= WL1271_SUPPORTED_FILTERS;
 	changed &= WL1271_SUPPORTED_FILTERS;
 
+	if (*total & FIF_ALLMULTI)
+		ret = wl1271_acx_group_address_tbl(wl, false, NULL, 0);
+	else if (fp)
+		ret = wl1271_acx_group_address_tbl(wl, fp->enabled,
+						   fp->mc_list,
+						   fp->mc_list_length);
+	if (ret < 0)
+		goto out_sleep;
+
+	kfree(fp);
+
+	/* FIXME: We still need to set our filters properly */
+
+	/* determine, whether supported filter values have changed */
 	if (changed == 0)
-		return;
+		goto out_sleep;
 
-	/* FIXME: wl->rx_config and wl->rx_filter are not protected */
-	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
-	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
+	/* apply configured filters */
+	ret = wl1271_acx_rx_config(wl, wl->rx_config, wl->rx_filter);
+	if (ret < 0)
+		goto out_sleep;
 
-	/*
-	 * FIXME: workqueues need to be properly cancelled on stop(), for
-	 * now let's just disable changing the filter settings. They will
-	 * be updated any on config().
-	 */
-	/* schedule_work(&wl->filter_work); */
+out_sleep:
+	wl1271_ps_elp_sleep(wl);
+
+out:
+	mutex_unlock(&wl->mutex);
 }
 
 static int wl1271_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
@@ -823,6 +1284,8 @@
 	struct wl1271 *wl = hw->priv;
 	const u8 *addr;
 	int ret;
+	u32 tx_seq_32 = 0;
+	u16 tx_seq_16 = 0;
 	u8 key_type;
 
 	static const u8 bcast_addr[ETH_ALEN] =
@@ -861,11 +1324,15 @@
 		key_type = KEY_TKIP;
 
 		key_conf->hw_key_idx = key_conf->keyidx;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	case ALG_CCMP:
 		key_type = KEY_AES;
 
 		key_conf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+		tx_seq_32 = wl->tx_security_seq_32;
+		tx_seq_16 = wl->tx_security_seq_16;
 		break;
 	default:
 		wl1271_error("Unknown key algo 0x%x", key_conf->alg);
@@ -879,7 +1346,7 @@
 		ret = wl1271_cmd_set_key(wl, KEY_ADD_OR_REPLACE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, tx_seq_32, tx_seq_16);
 		if (ret < 0) {
 			wl1271_error("Could not add or replace key");
 			goto out_sleep;
@@ -890,7 +1357,7 @@
 		ret = wl1271_cmd_set_key(wl, KEY_REMOVE,
 					 key_conf->keyidx, key_type,
 					 key_conf->keylen, key_conf->key,
-					 addr);
+					 addr, 0, 0);
 		if (ret < 0) {
 			wl1271_error("Could not remove key");
 			goto out_sleep;
@@ -921,13 +1388,13 @@
 	struct wl1271 *wl = hw->priv;
 	int ret;
 	u8 *ssid = NULL;
-	size_t ssid_len = 0;
+	size_t len = 0;
 
 	wl1271_debug(DEBUG_MAC80211, "mac80211 hw scan");
 
 	if (req->n_ssids) {
 		ssid = req->ssids[0].ssid;
-		ssid_len = req->ssids[0].ssid_len;
+		len = req->ssids[0].ssid_len;
 	}
 
 	mutex_lock(&wl->mutex);
@@ -936,7 +1403,12 @@
 	if (ret < 0)
 		goto out;
 
-	ret = wl1271_cmd_scan(hw->priv, ssid, ssid_len, 1, 0, 13, 3);
+	if (wl1271_11a_enabled())
+		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+				      WL1271_SCAN_BAND_DUAL, 3);
+	else
+		ret = wl1271_cmd_scan(hw->priv, ssid, len, 1, 0,
+				      WL1271_SCAN_BAND_2_4_GHZ, 3);
 
 	wl1271_ps_elp_sleep(wl);
 
@@ -969,6 +1441,22 @@
 	return ret;
 }
 
+static u32 wl1271_enabled_rates_get(struct wl1271 *wl, u64 basic_rate_set)
+{
+	struct ieee80211_supported_band *band;
+	u32 enabled_rates = 0;
+	int bit;
+
+	band = wl->hw->wiphy->bands[wl->band];
+	for (bit = 0; bit < band->n_bitrates; bit++) {
+		if (basic_rate_set & 0x1)
+			enabled_rates |= band->bitrates[bit].hw_value;
+		basic_rate_set >>= 1;
+	}
+
+	return enabled_rates;
+}
+
 static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw,
 				       struct ieee80211_vif *vif,
 				       struct ieee80211_bss_conf *bss_conf,
@@ -990,6 +1478,12 @@
 		if (bss_conf->assoc) {
 			wl->aid = bss_conf->aid;
 
+			/*
+			 * with wl1271, we don't need to update the
+			 * beacon_int and dtim_period, because the firmware
+			 * updates it by itself when the first beacon is
+			 * received after a join.
+			 */
 			ret = wl1271_cmd_build_ps_poll(wl, wl->aid);
 			if (ret < 0)
 				goto out_sleep;
@@ -1005,8 +1499,14 @@
 				if (ret < 0)
 					goto out_sleep;
 			}
+		} else {
+			/* use defaults when not associated */
+			wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+			wl->aid = 0;
 		}
+
 	}
+
 	if (changed & BSS_CHANGED_ERP_SLOT) {
 		if (bss_conf->use_short_slot)
 			ret = wl1271_acx_slot(wl, SLOT_TIME_SHORT);
@@ -1036,6 +1536,17 @@
 		}
 	}
 
+	if (changed & BSS_CHANGED_BASIC_RATES) {
+		wl->basic_rate_set = wl1271_enabled_rates_get(
+			wl, bss_conf->basic_rates);
+
+		ret = wl1271_acx_rate_policies(wl, wl->basic_rate_set);
+		if (ret < 0) {
+			wl1271_warning("Set rate policies failed %d", ret);
+			goto out_sleep;
+		}
+	}
+
 out_sleep:
 	wl1271_ps_elp_sleep(wl);
 
@@ -1047,44 +1558,44 @@
 /* can't be const, mac80211 writes to this */
 static struct ieee80211_rate wl1271_rates[] = {
 	{ .bitrate = 10,
-	  .hw_value = 0x1,
-	  .hw_value_short = 0x1, },
+	  .hw_value = CONF_HW_BIT_RATE_1MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_1MBPS, },
 	{ .bitrate = 20,
-	  .hw_value = 0x2,
-	  .hw_value_short = 0x2,
+	  .hw_value = CONF_HW_BIT_RATE_2MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_2MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 55,
-	  .hw_value = 0x4,
-	  .hw_value_short = 0x4,
+	  .hw_value = CONF_HW_BIT_RATE_5_5MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_5_5MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 110,
-	  .hw_value = 0x20,
-	  .hw_value_short = 0x20,
+	  .hw_value = CONF_HW_BIT_RATE_11MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_11MBPS,
 	  .flags = IEEE80211_RATE_SHORT_PREAMBLE },
 	{ .bitrate = 60,
-	  .hw_value = 0x8,
-	  .hw_value_short = 0x8, },
+	  .hw_value = CONF_HW_BIT_RATE_6MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_6MBPS, },
 	{ .bitrate = 90,
-	  .hw_value = 0x10,
-	  .hw_value_short = 0x10, },
+	  .hw_value = CONF_HW_BIT_RATE_9MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_9MBPS, },
 	{ .bitrate = 120,
-	  .hw_value = 0x40,
-	  .hw_value_short = 0x40, },
+	  .hw_value = CONF_HW_BIT_RATE_12MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_12MBPS, },
 	{ .bitrate = 180,
-	  .hw_value = 0x80,
-	  .hw_value_short = 0x80, },
+	  .hw_value = CONF_HW_BIT_RATE_18MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_18MBPS, },
 	{ .bitrate = 240,
-	  .hw_value = 0x200,
-	  .hw_value_short = 0x200, },
+	  .hw_value = CONF_HW_BIT_RATE_24MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_24MBPS, },
 	{ .bitrate = 360,
-	 .hw_value = 0x400,
-	 .hw_value_short = 0x400, },
+	 .hw_value = CONF_HW_BIT_RATE_36MBPS,
+	 .hw_value_short = CONF_HW_BIT_RATE_36MBPS, },
 	{ .bitrate = 480,
-	  .hw_value = 0x800,
-	  .hw_value_short = 0x800, },
+	  .hw_value = CONF_HW_BIT_RATE_48MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_48MBPS, },
 	{ .bitrate = 540,
-	  .hw_value = 0x1000,
-	  .hw_value_short = 0x1000, },
+	  .hw_value = CONF_HW_BIT_RATE_54MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
 };
 
 /* can't be const, mac80211 writes to this */
@@ -1112,6 +1623,88 @@
 	.n_bitrates = ARRAY_SIZE(wl1271_rates),
 };
 
+/* 5 GHz data rates for WL1273 */
+static struct ieee80211_rate wl1271_rates_5ghz[] = {
+	{ .bitrate = 60,
+	  .hw_value = CONF_HW_BIT_RATE_6MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_6MBPS, },
+	{ .bitrate = 90,
+	  .hw_value = CONF_HW_BIT_RATE_9MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_9MBPS, },
+	{ .bitrate = 120,
+	  .hw_value = CONF_HW_BIT_RATE_12MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_12MBPS, },
+	{ .bitrate = 180,
+	  .hw_value = CONF_HW_BIT_RATE_18MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_18MBPS, },
+	{ .bitrate = 240,
+	  .hw_value = CONF_HW_BIT_RATE_24MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_24MBPS, },
+	{ .bitrate = 360,
+	 .hw_value = CONF_HW_BIT_RATE_36MBPS,
+	 .hw_value_short = CONF_HW_BIT_RATE_36MBPS, },
+	{ .bitrate = 480,
+	  .hw_value = CONF_HW_BIT_RATE_48MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_48MBPS, },
+	{ .bitrate = 540,
+	  .hw_value = CONF_HW_BIT_RATE_54MBPS,
+	  .hw_value_short = CONF_HW_BIT_RATE_54MBPS, },
+};
+
+/* 5 GHz band channels for WL1273 */
+static struct ieee80211_channel wl1271_channels_5ghz[] = {
+	{ .hw_value = 183, .center_freq = 4915},
+	{ .hw_value = 184, .center_freq = 4920},
+	{ .hw_value = 185, .center_freq = 4925},
+	{ .hw_value = 187, .center_freq = 4935},
+	{ .hw_value = 188, .center_freq = 4940},
+	{ .hw_value = 189, .center_freq = 4945},
+	{ .hw_value = 192, .center_freq = 4960},
+	{ .hw_value = 196, .center_freq = 4980},
+	{ .hw_value = 7, .center_freq = 5035},
+	{ .hw_value = 8, .center_freq = 5040},
+	{ .hw_value = 9, .center_freq = 5045},
+	{ .hw_value = 11, .center_freq = 5055},
+	{ .hw_value = 12, .center_freq = 5060},
+	{ .hw_value = 16, .center_freq = 5080},
+	{ .hw_value = 34, .center_freq = 5170},
+	{ .hw_value = 36, .center_freq = 5180},
+	{ .hw_value = 38, .center_freq = 5190},
+	{ .hw_value = 40, .center_freq = 5200},
+	{ .hw_value = 42, .center_freq = 5210},
+	{ .hw_value = 44, .center_freq = 5220},
+	{ .hw_value = 46, .center_freq = 5230},
+	{ .hw_value = 48, .center_freq = 5240},
+	{ .hw_value = 52, .center_freq = 5260},
+	{ .hw_value = 56, .center_freq = 5280},
+	{ .hw_value = 60, .center_freq = 5300},
+	{ .hw_value = 64, .center_freq = 5320},
+	{ .hw_value = 100, .center_freq = 5500},
+	{ .hw_value = 104, .center_freq = 5520},
+	{ .hw_value = 108, .center_freq = 5540},
+	{ .hw_value = 112, .center_freq = 5560},
+	{ .hw_value = 116, .center_freq = 5580},
+	{ .hw_value = 120, .center_freq = 5600},
+	{ .hw_value = 124, .center_freq = 5620},
+	{ .hw_value = 128, .center_freq = 5640},
+	{ .hw_value = 132, .center_freq = 5660},
+	{ .hw_value = 136, .center_freq = 5680},
+	{ .hw_value = 140, .center_freq = 5700},
+	{ .hw_value = 149, .center_freq = 5745},
+	{ .hw_value = 153, .center_freq = 5765},
+	{ .hw_value = 157, .center_freq = 5785},
+	{ .hw_value = 161, .center_freq = 5805},
+	{ .hw_value = 165, .center_freq = 5825},
+};
+
+
+static struct ieee80211_supported_band wl1271_band_5ghz = {
+	.channels = wl1271_channels_5ghz,
+	.n_channels = ARRAY_SIZE(wl1271_channels_5ghz),
+	.bitrates = wl1271_rates_5ghz,
+	.n_bitrates = ARRAY_SIZE(wl1271_rates_5ghz),
+};
+
 static const struct ieee80211_ops wl1271_ops = {
 	.start = wl1271_op_start,
 	.stop = wl1271_op_stop,
@@ -1119,6 +1712,7 @@
 	.remove_interface = wl1271_op_remove_interface,
 	.config = wl1271_op_config,
 /* 	.config_interface = wl1271_op_config_interface, */
+	.prepare_multicast = wl1271_op_prepare_multicast,
 	.configure_filter = wl1271_op_configure_filter,
 	.tx = wl1271_op_tx,
 	.set_key = wl1271_op_set_key,
@@ -1151,24 +1745,25 @@
 
 static int wl1271_init_ieee80211(struct wl1271 *wl)
 {
-	/*
-	 * The tx descriptor buffer and the TKIP space.
-	 *
-	 * FIXME: add correct 1271 descriptor size
-	 */
-	wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE;
+	/* The tx descriptor buffer and the TKIP space. */
+	wl->hw->extra_tx_headroom = WL1271_TKIP_IV_SPACE +
+		sizeof(struct wl1271_tx_hw_descr);
 
 	/* unit us */
 	/* FIXME: find a proper value */
 	wl->hw->channel_change_time = 10000;
 
 	wl->hw->flags = IEEE80211_HW_SIGNAL_DBM |
-		IEEE80211_HW_NOISE_DBM;
+		IEEE80211_HW_NOISE_DBM |
+		IEEE80211_HW_BEACON_FILTER;
 
 	wl->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
 	wl->hw->wiphy->max_scan_ssids = 1;
 	wl->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = &wl1271_band_2ghz;
 
+	if (wl1271_11a_enabled())
+		wl->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = &wl1271_band_5ghz;
+
 	SET_IEEE80211_DEV(wl->hw, &wl->spi->dev);
 
 	return 0;
@@ -1213,17 +1808,18 @@
 	wl = hw->priv;
 	memset(wl, 0, sizeof(*wl));
 
+	INIT_LIST_HEAD(&wl->list);
+
 	wl->hw = hw;
 	dev_set_drvdata(&spi->dev, wl);
 	wl->spi = spi;
 
 	skb_queue_head_init(&wl->tx_queue);
 
-	INIT_WORK(&wl->filter_work, wl1271_filter_work);
+	INIT_DELAYED_WORK(&wl->elp_work, wl1271_elp_work);
 	wl->channel = WL1271_DEFAULT_CHANNEL;
 	wl->scanning = false;
 	wl->default_key = 0;
-	wl->listen_int = 1;
 	wl->rx_counter = 0;
 	wl->rx_config = WL1271_DEFAULT_RX_CONFIG;
 	wl->rx_filter = WL1271_DEFAULT_RX_FILTER;
@@ -1232,10 +1828,12 @@
 	wl->psm_requested = false;
 	wl->tx_queue_stopped = false;
 	wl->power_level = WL1271_DEFAULT_POWER_LEVEL;
+	wl->basic_rate_set = WL1271_DEFAULT_BASIC_RATE_SET;
+	wl->band = IEEE80211_BAND_2GHZ;
+	wl->vif = NULL;
+	wl->joined = false;
 
-	/* We use the default power on sleep time until we know which chip
-	 * we're using */
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		wl->tx_frames[i] = NULL;
 
 	spin_lock_init(&wl->wl_lock);
@@ -1250,13 +1848,6 @@
 	wl->state = WL1271_STATE_OFF;
 	mutex_init(&wl->mutex);
 
-	wl->rx_descriptor = kmalloc(sizeof(*wl->rx_descriptor), GFP_KERNEL);
-	if (!wl->rx_descriptor) {
-		wl1271_error("could not allocate memory for rx descriptor");
-		ret = -ENOMEM;
-		goto out_free;
-	}
-
 	/* This is the only SPI value that we need to set here, the rest
 	 * comes from the board-peripherals file */
 	spi->bits_per_word = 32;
@@ -1298,6 +1889,9 @@
 	}
 	dev_set_drvdata(&wl1271_device.dev, wl);
 
+	/* Apply default driver configuration. */
+	wl1271_conf_init(wl);
+
 	ret = wl1271_init_ieee80211(wl);
 	if (ret)
 		goto out_platform;
@@ -1319,9 +1913,6 @@
 	free_irq(wl->irq, wl);
 
  out_free:
-	kfree(wl->rx_descriptor);
-	wl->rx_descriptor = NULL;
-
 	ieee80211_free_hw(hw);
 
 	return ret;
@@ -1337,14 +1928,11 @@
 	platform_device_unregister(&wl1271_device);
 	free_irq(wl->irq, wl);
 	kfree(wl->target_mem_map);
-	kfree(wl->fw);
+	vfree(wl->fw);
 	wl->fw = NULL;
 	kfree(wl->nvs);
 	wl->nvs = NULL;
 
-	kfree(wl->rx_descriptor);
-	wl->rx_descriptor = NULL;
-
 	kfree(wl->fw_status);
 	kfree(wl->tx_res_if);
 
@@ -1391,3 +1979,4 @@
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <luciano.coelho@nokia.com>");
+MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.c b/drivers/net/wireless/wl12xx/wl1271_ps.c
index 1dc74b0..507cd91 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.c
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.c
@@ -27,25 +27,38 @@
 
 #define WL1271_WAKEUP_TIMEOUT 500
 
+void wl1271_elp_work(struct work_struct *work)
+{
+	struct delayed_work *dwork;
+	struct wl1271 *wl;
+
+	dwork = container_of(work, struct delayed_work, work);
+	wl = container_of(dwork, struct wl1271, elp_work);
+
+	wl1271_debug(DEBUG_PSM, "elp work");
+
+	mutex_lock(&wl->mutex);
+
+	if (wl->elp || !wl->psm)
+		goto out;
+
+	wl1271_debug(DEBUG_PSM, "chip to elp");
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
+	wl->elp = true;
+
+out:
+	mutex_unlock(&wl->mutex);
+}
+
+#define ELP_ENTRY_DELAY  5
+
 /* Routines to toggle sleep mode while in ELP */
 void wl1271_ps_elp_sleep(struct wl1271 *wl)
 {
-	/*
-	 * FIXME: due to a problem in the firmware (causing a firmware
-	 * crash), ELP entry is prevented below. Remove the "true" to
-	 * re-enable ELP entry.
-	 */
-	if (true || wl->elp || !wl->psm)
-		return;
-
-	/*
-	 * Go to ELP unless there is work already pending - pending work
-	 * will immediately wakeup the chipset anyway.
-	 */
-	if (!work_pending(&wl->irq_work) && !work_pending(&wl->tx_work)) {
-		wl1271_debug(DEBUG_PSM, "chip to elp");
-		wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_SLEEP);
-		wl->elp = true;
+	if (wl->psm) {
+		cancel_delayed_work(&wl->elp_work);
+		ieee80211_queue_delayed_work(wl->hw, &wl->elp_work,
+					msecs_to_jiffies(ELP_ENTRY_DELAY));
 	}
 }
 
@@ -73,7 +86,7 @@
 		wl->elp_compl = &compl;
 	spin_unlock_irqrestore(&wl->wl_lock, flags);
 
-	wl1271_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
+	wl1271_raw_write32(wl, HW_ACCESS_ELP_CTRL_REG_ADDR, ELPCTRL_WAKE_UP);
 
 	if (!pending) {
 		ret = wait_for_completion_timeout(
@@ -111,6 +124,17 @@
 	switch (mode) {
 	case STATION_POWER_SAVE_MODE:
 		wl1271_debug(DEBUG_PSM, "entering psm");
+
+		/* enable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, true);
+		if (ret < 0)
+			return ret;
+
+		/* enable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, true);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1271_cmd_ps_mode(wl, STATION_POWER_SAVE_MODE);
 		if (ret < 0)
 			return ret;
@@ -128,6 +152,16 @@
 		if (ret < 0)
 			return ret;
 
+		/* disable beacon early termination */
+		ret = wl1271_acx_bet_enable(wl, false);
+		if (ret < 0)
+			return ret;
+
+		/* disable beacon filtering */
+		ret = wl1271_acx_beacon_filter_opt(wl, false);
+		if (ret < 0)
+			return ret;
+
 		ret = wl1271_cmd_ps_mode(wl, STATION_ACTIVE_MODE);
 		if (ret < 0)
 			return ret;
diff --git a/drivers/net/wireless/wl12xx/wl1271_ps.h b/drivers/net/wireless/wl12xx/wl1271_ps.h
index de2bd3c..779653d 100644
--- a/drivers/net/wireless/wl12xx/wl1271_ps.h
+++ b/drivers/net/wireless/wl12xx/wl1271_ps.h
@@ -30,6 +30,6 @@
 int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode);
 void wl1271_ps_elp_sleep(struct wl1271 *wl);
 int wl1271_ps_elp_wakeup(struct wl1271 *wl, bool chip_awake);
-
+void wl1271_elp_work(struct work_struct *work);
 
 #endif /* __WL1271_PS_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_reg.h b/drivers/net/wireless/wl12xx/wl1271_reg.h
index f8ed4a4..1f23738 100644
--- a/drivers/net/wireless/wl12xx/wl1271_reg.h
+++ b/drivers/net/wireless/wl12xx/wl1271_reg.h
@@ -34,7 +34,7 @@
 #define REGISTERS_WORK_SIZE 0x0000b000
 
 #define HW_ACCESS_ELP_CTRL_REG_ADDR         0x1FFFC
-#define STATUS_MEM_ADDRESS                  0x40400
+#define FW_STATUS_ADDR                      (0x14FC0 + 0xA000)
 
 /* ELP register commands */
 #define ELPCTRL_WAKE_UP             0x1
@@ -213,7 +213,6 @@
 ==============================================*/
 #define ACX_REG_INTERRUPT_ACK          (REGISTERS_BASE + 0x04F0)
 
-#define RX_DRIVER_DUMMY_WRITE_ADDRESS  (REGISTERS_BASE + 0x0534)
 #define RX_DRIVER_COUNTER_ADDRESS      (REGISTERS_BASE + 0x0538)
 
 /* Device Configuration registers*/
@@ -614,50 +613,6 @@
 	MAX_RADIO_BANDS = 0xFF
 };
 
-enum {
-	NO_RATE      = 0,
-	RATE_1MBPS   = 0x0A,
-	RATE_2MBPS   = 0x14,
-	RATE_5_5MBPS = 0x37,
-	RATE_6MBPS   = 0x0B,
-	RATE_9MBPS   = 0x0F,
-	RATE_11MBPS  = 0x6E,
-	RATE_12MBPS  = 0x0A,
-	RATE_18MBPS  = 0x0E,
-	RATE_22MBPS  = 0xDC,
-	RATE_24MBPS  = 0x09,
-	RATE_36MBPS  = 0x0D,
-	RATE_48MBPS  = 0x08,
-	RATE_54MBPS  = 0x0C
-};
-
-enum {
-	RATE_INDEX_1MBPS   =  0,
-	RATE_INDEX_2MBPS   =  1,
-	RATE_INDEX_5_5MBPS =  2,
-	RATE_INDEX_6MBPS   =  3,
-	RATE_INDEX_9MBPS   =  4,
-	RATE_INDEX_11MBPS  =  5,
-	RATE_INDEX_12MBPS  =  6,
-	RATE_INDEX_18MBPS  =  7,
-	RATE_INDEX_22MBPS  =  8,
-	RATE_INDEX_24MBPS  =  9,
-	RATE_INDEX_36MBPS  =  10,
-	RATE_INDEX_48MBPS  =  11,
-	RATE_INDEX_54MBPS  =  12,
-	RATE_INDEX_MAX     =  RATE_INDEX_54MBPS,
-	MAX_RATE_INDEX,
-	INVALID_RATE_INDEX = MAX_RATE_INDEX,
-	RATE_INDEX_ENUM_MAX_SIZE = 0x7FFFFFFF
-};
-
-enum {
-	RATE_MASK_1MBPS = 0x1,
-	RATE_MASK_2MBPS = 0x2,
-	RATE_MASK_5_5MBPS = 0x4,
-	RATE_MASK_11MBPS = 0x20,
-};
-
 #define SHORT_PREAMBLE_BIT   BIT(0) /* CCK or Barker depending on the rate */
 #define OFDM_RATE_BIT        BIT(6)
 #define PBCC_RATE_BIT        BIT(7)
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
index ad8b690..37d81ab 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -30,14 +30,15 @@
 static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
 				  u32 drv_rx_counter)
 {
-	return status->rx_pkt_descs[drv_rx_counter] & RX_MEM_BLOCK_MASK;
+	return le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
+		RX_MEM_BLOCK_MASK;
 }
 
 static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
 				 u32 drv_rx_counter)
 {
-	return (status->rx_pkt_descs[drv_rx_counter] & RX_BUF_SIZE_MASK) >>
-		RX_BUF_SIZE_SHIFT_DIV;
+	return (le32_to_cpu(status->rx_pkt_descs[drv_rx_counter]) &
+		RX_BUF_SIZE_MASK) >> RX_BUF_SIZE_SHIFT_DIV;
 }
 
 /* The values of this table must match the wl1271_rates[] array */
@@ -70,6 +71,36 @@
 	0                           /* WL1271_RATE_1    */
 };
 
+/* The values of this table must match the wl1271_rates[] array */
+static u8 wl1271_5_ghz_rx_rate_to_idx[] = {
+	/* MCS rates are used only with 11n */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
+
+	7,                          /* WL1271_RATE_54   */
+	6,                          /* WL1271_RATE_48   */
+	5,                          /* WL1271_RATE_36   */
+	4,                          /* WL1271_RATE_24   */
+
+	/* TI-specific rate */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22   */
+
+	3,                          /* WL1271_RATE_18   */
+	2,                          /* WL1271_RATE_12   */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_11   */
+	1,                          /* WL1271_RATE_9    */
+	0,                          /* WL1271_RATE_6    */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_5_5  */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_2    */
+	WL1271_RX_RATE_UNSUPPORTED  /* WL1271_RATE_1    */
+};
+
 static void wl1271_rx_status(struct wl1271 *wl,
 			     struct wl1271_rx_descriptor *desc,
 			     struct ieee80211_rx_status *status,
@@ -77,12 +108,21 @@
 {
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
-	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
+	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
+	    WL1271_RX_DESC_BAND_BG) {
 		status->band = IEEE80211_BAND_2GHZ;
-	else
+		status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
+	} else if ((desc->flags & WL1271_RX_DESC_BAND_MASK) ==
+		 WL1271_RX_DESC_BAND_A) {
+		status->band = IEEE80211_BAND_5GHZ;
+		status->rate_idx = wl1271_5_ghz_rx_rate_to_idx[desc->rate];
+	} else
 		wl1271_warning("unsupported band 0x%x",
 			       desc->flags & WL1271_RX_DESC_BAND_MASK);
 
+	if (unlikely(status->rate_idx == WL1271_RX_RATE_UNSUPPORTED))
+		wl1271_warning("unsupported rate");
+
 	/*
 	 * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
 	 * timestamp from the beacon (acx_tsf_info).  In BSS mode (infra) we
@@ -91,12 +131,6 @@
 	 */
 	status->signal = desc->rssi;
 
-	/* FIXME: Should this be optimized? */
-	status->qual = (desc->rssi - WL1271_RX_MIN_RSSI) * 100 /
-		(WL1271_RX_MAX_RSSI - WL1271_RX_MIN_RSSI);
-	status->qual = min(status->qual, 100);
-	status->qual = max(status->qual, 0);
-
 	/*
 	 * FIXME: In wl1251, the SNR should be divided by two.  In wl1271 we
 	 * need to divide by two for now, but TI has been discussing about
@@ -109,17 +143,11 @@
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
 		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
 
-		if (likely(!(desc->flags & WL1271_RX_DESC_DECRYPT_FAIL)))
+		if (likely(!(desc->status & WL1271_RX_DESC_DECRYPT_FAIL)))
 			status->flag |= RX_FLAG_DECRYPTED;
-
-		if (unlikely(desc->flags & WL1271_RX_DESC_MIC_FAIL))
+		if (unlikely(desc->status & WL1271_RX_DESC_MIC_FAIL))
 			status->flag |= RX_FLAG_MMIC_ERROR;
 	}
-
-	status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
-
-	if (status->rate_idx == WL1271_RX_RATE_UNSUPPORTED)
-		wl1271_warning("unsupported rate");
 }
 
 static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
@@ -138,7 +166,7 @@
 	}
 
 	buf = skb_put(skb, length);
-	wl1271_spi_reg_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
+	wl1271_spi_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
 
 	/* the data read starts with the descriptor */
 	desc = (struct wl1271_rx_descriptor *) buf;
@@ -156,7 +184,7 @@
 		     beacon ? "beacon" : "");
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
-	ieee80211_rx(wl->hw, skb);
+	ieee80211_rx_ni(wl->hw, skb);
 }
 
 void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
@@ -176,15 +204,15 @@
 			break;
 		}
 
-		wl->rx_mem_pool_addr.addr =
-			(mem_block << 8) + wl_mem_map->packet_memory_pool_start;
+		wl->rx_mem_pool_addr.addr = (mem_block << 8) +
+			le32_to_cpu(wl_mem_map->packet_memory_pool_start);
 		wl->rx_mem_pool_addr.addr_extra =
 			wl->rx_mem_pool_addr.addr + 4;
 
 		/* Choose the block we want to read */
-		wl1271_spi_reg_write(wl, WL1271_SLV_REG_DATA,
-				     &wl->rx_mem_pool_addr,
-				     sizeof(wl->rx_mem_pool_addr), false);
+		wl1271_spi_write(wl, WL1271_SLV_REG_DATA,
+				 &wl->rx_mem_pool_addr,
+				 sizeof(wl->rx_mem_pool_addr), false);
 
 		wl1271_rx_handle_data(wl, buf_size);
 
@@ -192,9 +220,5 @@
 		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
 	}
 
-	wl1271_reg_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
-
-	/* This is a workaround for some problems in the chip */
-	wl1271_reg_write32(wl, RX_DRIVER_DUMMY_WRITE_ADDRESS, 0x1);
-
+	wl1271_spi_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.h b/drivers/net/wireless/wl12xx/wl1271_rx.h
index d1ca60e..1ae6d17 100644
--- a/drivers/net/wireless/wl12xx/wl1271_rx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.h
@@ -102,14 +102,14 @@
 #define RX_BUF_SIZE_SHIFT_DIV 6
 
 struct wl1271_rx_descriptor {
-	u16 length;
+	__le16 length;
 	u8  status;
 	u8  flags;
 	u8  rate;
 	u8  channel;
 	s8  rssi;
 	u8  snr;
-	u32 timestamp;
+	__le32 timestamp;
 	u8  packet_class;
 	u8  process_id;
 	u8  pad_len;
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 4a12880..02978a1 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -30,17 +30,29 @@
 #include "wl12xx_80211.h"
 #include "wl1271_spi.h"
 
-static int wl1271_translate_reg_addr(struct wl1271 *wl, int addr)
+static int wl1271_translate_addr(struct wl1271 *wl, int addr)
 {
-	return addr - wl->physical_reg_addr + wl->virtual_reg_addr;
+	/*
+	 * To translate, first check to which window of addresses the
+	 * particular address belongs. Then subtract the starting address
+	 * of that window from the address. Then, add offset of the
+	 * translated region.
+	 *
+	 * The translated regions occur next to each other in physical device
+	 * memory, so just add the sizes of the preceeding address regions to
+	 * get the offset to the new region.
+	 *
+	 * Currently, only the two first regions are addressed, and the
+	 * assumption is that all addresses will fall into either of those
+	 * two.
+	 */
+	if ((addr >= wl->part.reg.start) &&
+	    (addr < wl->part.reg.start + wl->part.reg.size))
+		return addr - wl->part.reg.start + wl->part.mem.size;
+	else
+		return addr - wl->part.mem.start;
 }
 
-static int wl1271_translate_mem_addr(struct wl1271 *wl, int addr)
-{
-	return addr - wl->physical_mem_addr + wl->virtual_mem_addr;
-}
-
-
 void wl1271_spi_reset(struct wl1271 *wl)
 {
 	u8 *cmd;
@@ -123,133 +135,137 @@
 
 /* Set the SPI partitions to access the chip addresses
  *
- * There are two VIRTUAL (SPI) partitions (the memory partition and the
- * registers partition), which are mapped to two different areas of the
- * PHYSICAL (hardware) memory.  This function also makes other checks to
- * ensure that the partitions are not overlapping.  In the diagram below, the
- * memory partition comes before the register partition, but the opposite is
- * also supported.
+ * To simplify driver code, a fixed (virtual) memory map is defined for
+ * register and memory addresses. Because in the chipset, in different stages
+ * of operation, those addresses will move around, an address translation
+ * mechanism is required.
  *
- *                               PHYSICAL address
+ * There are four partitions (three memory and one register partition),
+ * which are mapped to two different areas of the hardware memory.
+ *
+ *                                Virtual address
  *                                     space
  *
  *                                    |    |
- *                                 ...+----+--> mem_start
- *          VIRTUAL address     ...   |    |
+ *                                 ...+----+--> mem.start
+ *          Physical address    ...   |    |
  *               space       ...      |    | [PART_0]
  *                        ...         |    |
- * 0x00000000 <--+----+...         ...+----+--> mem_start + mem_size
+ *  00000000  <--+----+...         ...+----+--> mem.start + mem.size
  *               |    |         ...   |    |
  *               |MEM |      ...      |    |
  *               |    |   ...         |    |
- *  part_size <--+----+...            |    | {unused area)
+ *  mem.size  <--+----+...            |    | {unused area)
  *               |    |   ...         |    |
  *               |REG |      ...      |    |
- *  part_size    |    |         ...   |    |
- *      +     <--+----+...         ...+----+--> reg_start
- *  reg_size              ...         |    |
- *                           ...      |    | [PART_1]
- *                              ...   |    |
- *                                 ...+----+--> reg_start + reg_size
+ *  mem.size     |    |         ...   |    |
+ *      +     <--+----+...         ...+----+--> reg.start
+ *  reg.size     |    |   ...         |    |
+ *               |MEM2|      ...      |    | [PART_1]
+ *               |    |         ...   |    |
+ *                                 ...+----+--> reg.start + reg.size
  *                                    |    |
  *
  */
 int wl1271_set_partition(struct wl1271 *wl,
-			  u32 mem_start, u32 mem_size,
-			  u32 reg_start, u32 reg_size)
+			 struct wl1271_partition_set *p)
 {
-	struct wl1271_partition *partition;
-	struct spi_transfer t;
-	struct spi_message m;
-	size_t len, cmd_len;
-	u32 *cmd;
-	int addr;
-
-	cmd_len = sizeof(u32) + 2 * sizeof(struct wl1271_partition);
-	cmd = kzalloc(cmd_len, GFP_KERNEL);
-	if (!cmd)
-		return -ENOMEM;
-
-	spi_message_init(&m);
-	memset(&t, 0, sizeof(t));
-
-	partition = (struct wl1271_partition *) (cmd + 1);
-	addr = HW_ACCESS_PART0_SIZE_ADDR;
-	len = 2 * sizeof(struct wl1271_partition);
-
-	*cmd |= WSPI_CMD_WRITE;
-	*cmd |= (len << WSPI_CMD_BYTE_LENGTH_OFFSET) & WSPI_CMD_BYTE_LENGTH;
-	*cmd |= addr & WSPI_CMD_BYTE_ADDR;
+	/* copy partition info */
+	memcpy(&wl->part, p, sizeof(*p));
 
 	wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-		     mem_start, mem_size);
+		     p->mem.start, p->mem.size);
 	wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-		     reg_start, reg_size);
+		     p->reg.start, p->reg.size);
+	wl1271_debug(DEBUG_SPI, "mem2_start %08X mem2_size %08X",
+		     p->mem2.start, p->mem2.size);
+	wl1271_debug(DEBUG_SPI, "mem3_start %08X mem3_size %08X",
+		     p->mem3.start, p->mem3.size);
 
-	/* Make sure that the two partitions together don't exceed the
-	 * address range */
-	if ((mem_size + reg_size) > HW_ACCESS_MEMORY_MAX_RANGE) {
-		wl1271_debug(DEBUG_SPI, "Total size exceeds maximum virtual"
-			     " address range.  Truncating partition[0].");
-		mem_size = HW_ACCESS_MEMORY_MAX_RANGE - reg_size;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	}
-
-	if ((mem_start < reg_start) &&
-	    ((mem_start + mem_size) > reg_start)) {
-		/* Guarantee that the memory partition doesn't overlap the
-		 * registers partition */
-		wl1271_debug(DEBUG_SPI, "End of partition[0] is "
-			     "overlapping partition[1].  Adjusted.");
-		mem_size = reg_start - mem_start;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	} else if ((reg_start < mem_start) &&
-		   ((reg_start + reg_size) > mem_start)) {
-		/* Guarantee that the register partition doesn't overlap the
-		 * memory partition */
-		wl1271_debug(DEBUG_SPI, "End of partition[1] is"
-			     " overlapping partition[0].  Adjusted.");
-		reg_size = mem_start - reg_start;
-		wl1271_debug(DEBUG_SPI, "mem_start %08X mem_size %08X",
-			     mem_start, mem_size);
-		wl1271_debug(DEBUG_SPI, "reg_start %08X reg_size %08X",
-			     reg_start, reg_size);
-	}
-
-	partition[0].start = mem_start;
-	partition[0].size  = mem_size;
-	partition[1].start = reg_start;
-	partition[1].size  = reg_size;
-
-	wl->physical_mem_addr = mem_start;
-	wl->physical_reg_addr = reg_start;
-
-	wl->virtual_mem_addr = 0;
-	wl->virtual_reg_addr = mem_size;
-
-	t.tx_buf = cmd;
-	t.len = cmd_len;
-	spi_message_add_tail(&t, &m);
-
-	spi_sync(wl->spi, &m);
-
-	kfree(cmd);
+	/* write partition info to the chipset */
+	wl1271_raw_write32(wl, HW_PART0_START_ADDR, p->mem.start);
+	wl1271_raw_write32(wl, HW_PART0_SIZE_ADDR, p->mem.size);
+	wl1271_raw_write32(wl, HW_PART1_START_ADDR, p->reg.start);
+	wl1271_raw_write32(wl, HW_PART1_SIZE_ADDR, p->reg.size);
+	wl1271_raw_write32(wl, HW_PART2_START_ADDR, p->mem2.start);
+	wl1271_raw_write32(wl, HW_PART2_SIZE_ADDR, p->mem2.size);
+	wl1271_raw_write32(wl, HW_PART3_START_ADDR, p->mem3.start);
 
 	return 0;
 }
 
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
-		     size_t len, bool fixed)
+#define WL1271_BUSY_WORD_TIMEOUT 1000
+
+/* FIXME: Check busy words, removed due to SPI bug */
+#if 0
+static void wl1271_spi_read_busy(struct wl1271 *wl, void *buf, size_t len)
+{
+	struct spi_transfer t[1];
+	struct spi_message m;
+	u32 *busy_buf;
+	int num_busy_bytes = 0;
+
+	wl1271_info("spi read BUSY!");
+
+	/*
+	 * Look for the non-busy word in the read buffer, and if found,
+	 * read in the remaining data into the buffer.
+	 */
+	busy_buf = (u32 *)buf;
+	for (; (u32)busy_buf < (u32)buf + len; busy_buf++) {
+		num_busy_bytes += sizeof(u32);
+		if (*busy_buf & 0x1) {
+			spi_message_init(&m);
+			memset(t, 0, sizeof(t));
+			memmove(buf, busy_buf, len - num_busy_bytes);
+			t[0].rx_buf = buf + (len - num_busy_bytes);
+			t[0].len = num_busy_bytes;
+			spi_message_add_tail(&t[0], &m);
+			spi_sync(wl->spi, &m);
+			return;
+		}
+	}
+
+	/*
+	 * Read further busy words from SPI until a non-busy word is
+	 * encountered, then read the data itself into the buffer.
+	 */
+	wl1271_info("spi read BUSY-polling needed!");
+
+	num_busy_bytes = WL1271_BUSY_WORD_TIMEOUT;
+	busy_buf = wl->buffer_busyword;
+	while (num_busy_bytes) {
+		num_busy_bytes--;
+		spi_message_init(&m);
+		memset(t, 0, sizeof(t));
+		t[0].rx_buf = busy_buf;
+		t[0].len = sizeof(u32);
+		spi_message_add_tail(&t[0], &m);
+		spi_sync(wl->spi, &m);
+
+		if (*busy_buf & 0x1) {
+			spi_message_init(&m);
+			memset(t, 0, sizeof(t));
+			t[0].rx_buf = buf;
+			t[0].len = len;
+			spi_message_add_tail(&t[0], &m);
+			spi_sync(wl->spi, &m);
+			return;
+		}
+	}
+
+	/* The SPI bus is unresponsive, the read failed. */
+	memset(buf, 0, len);
+	wl1271_error("SPI read busy-word timeout!\n");
+}
+#endif
+
+void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
+			 size_t len, bool fixed)
 {
 	struct spi_transfer t[3];
 	struct spi_message m;
-	u8 *busy_buf;
+	u32 *busy_buf;
 	u32 *cmd;
 
 	cmd = &wl->buffer_cmd;
@@ -281,14 +297,16 @@
 
 	spi_sync(wl->spi, &m);
 
-	/* FIXME: check busy words */
+	/* FIXME: Check busy words, removed due to SPI bug */
+	/* if (!(busy_buf[WL1271_BUSY_WORD_CNT - 1] & 0x1))
+	   wl1271_spi_read_busy(wl, buf, len); */
 
 	wl1271_dump(DEBUG_SPI, "spi_read cmd -> ", cmd, sizeof(*cmd));
 	wl1271_dump(DEBUG_SPI, "spi_read buf <- ", buf, len);
 }
 
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
-		      size_t len, bool fixed)
+void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
+			  size_t len, bool fixed)
 {
 	struct spi_transfer t[2];
 	struct spi_message m;
@@ -321,62 +339,77 @@
 	wl1271_dump(DEBUG_SPI, "spi_write buf -> ", buf, len);
 }
 
-void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf,
-			 size_t len)
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed)
 {
 	int physical;
 
-	physical = wl1271_translate_mem_addr(wl, addr);
+	physical = wl1271_translate_addr(wl, addr);
 
-	wl1271_spi_read(wl, physical, buf, len, false);
+	wl1271_spi_raw_read(wl, physical, buf, len, fixed);
 }
 
-void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf,
-			  size_t len)
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed)
 {
 	int physical;
 
-	physical = wl1271_translate_mem_addr(wl, addr);
+	physical = wl1271_translate_addr(wl, addr);
 
-	wl1271_spi_write(wl, physical, buf, len, false);
+	wl1271_spi_raw_write(wl, physical, buf, len, fixed);
 }
 
-void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-			 bool fixed)
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr)
 {
-	int physical;
-
-	physical = wl1271_translate_reg_addr(wl, addr);
-
-	wl1271_spi_read(wl, physical, buf, len, fixed);
+	return wl1271_raw_read32(wl, wl1271_translate_addr(wl, addr));
 }
 
-void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-			  bool fixed)
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val)
 {
-	int physical;
-
-	physical = wl1271_translate_reg_addr(wl, addr);
-
-	wl1271_spi_write(wl, physical, buf, len, fixed);
+	wl1271_raw_write32(wl, wl1271_translate_addr(wl, addr), val);
 }
 
-u32 wl1271_mem_read32(struct wl1271 *wl, int addr)
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
 {
-	return wl1271_read32(wl, wl1271_translate_mem_addr(wl, addr));
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
+
+	/* write value to OCP_POR_WDATA */
+	wl1271_spi_write32(wl, OCP_DATA_WRITE, val);
+
+	/* write 1 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_WRITE);
 }
 
-void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val)
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
 {
-	wl1271_write32(wl, wl1271_translate_mem_addr(wl, addr), val);
-}
+	u32 val;
+	int timeout = OCP_CMD_LOOP;
 
-u32 wl1271_reg_read32(struct wl1271 *wl, int addr)
-{
-	return wl1271_read32(wl, wl1271_translate_reg_addr(wl, addr));
-}
+	/* write address >> 1 + 0x30000 to OCP_POR_CTR */
+	addr = (addr >> 1) + 0x30000;
+	wl1271_spi_write32(wl, OCP_POR_CTR, addr);
 
-void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val)
-{
-	wl1271_write32(wl, wl1271_translate_reg_addr(wl, addr), val);
+	/* write 2 to OCP_CMD */
+	wl1271_spi_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+	/* poll for data ready */
+	do {
+		val = wl1271_spi_read32(wl, OCP_DATA_READ);
+		timeout--;
+	} while (!(val & OCP_READY_MASK) && timeout);
+
+	if (!timeout) {
+		wl1271_warning("Top register access timed out.");
+		return 0xffff;
+	}
+
+	/* check data status and return if OK */
+	if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+		return val & 0xffff;
+	else {
+		wl1271_warning("Top register access returned error.");
+		return 0xffff;
+	}
 }
diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
index 2c99684..cb7df1c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_spi.h
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.h
@@ -29,10 +29,14 @@
 
 #define HW_ACCESS_MEMORY_MAX_RANGE		0x1FFC0
 
-#define HW_ACCESS_PART0_SIZE_ADDR           0x1FFC0
-#define HW_ACCESS_PART0_START_ADDR          0x1FFC4
-#define HW_ACCESS_PART1_SIZE_ADDR           0x1FFC8
-#define HW_ACCESS_PART1_START_ADDR          0x1FFCC
+#define HW_PARTITION_REGISTERS_ADDR         0x1ffc0
+#define HW_PART0_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR)
+#define HW_PART0_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 4)
+#define HW_PART1_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 8)
+#define HW_PART1_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 12)
+#define HW_PART2_SIZE_ADDR                  (HW_PARTITION_REGISTERS_ADDR + 16)
+#define HW_PART2_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 20)
+#define HW_PART3_START_ADDR                 (HW_PARTITION_REGISTERS_ADDR + 24)
 
 #define HW_ACCESS_REGISTER_SIZE             4
 
@@ -67,47 +71,56 @@
 		((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
 #define HW_ACCESS_WSPI_INIT_CMD_MASK  0
 
+#define OCP_CMD_LOOP  32
+
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ  0x2
+
+#define OCP_READY_MASK  BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+
+#define OCP_STATUS_NO_RESP    0x00000
+#define OCP_STATUS_OK         0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
 
 /* Raw target IO, address is not translated */
-void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
+void wl1271_spi_raw_write(struct wl1271 *wl, int addr, void *buf,
 		      size_t len, bool fixed);
-void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf,
+void wl1271_spi_raw_read(struct wl1271 *wl, int addr, void *buf,
 		     size_t len, bool fixed);
 
-/* Memory target IO, address is tranlated to partition 0 */
-void wl1271_spi_mem_read(struct wl1271 *wl, int addr, void *buf, size_t len);
-void wl1271_spi_mem_write(struct wl1271 *wl, int addr, void *buf, size_t len);
-u32 wl1271_mem_read32(struct wl1271 *wl, int addr);
-void wl1271_mem_write32(struct wl1271 *wl, int addr, u32 val);
+/* Translated target IO */
+void wl1271_spi_read(struct wl1271 *wl, int addr, void *buf, size_t len,
+		     bool fixed);
+void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf, size_t len,
+		      bool fixed);
+u32 wl1271_spi_read32(struct wl1271 *wl, int addr);
+void wl1271_spi_write32(struct wl1271 *wl, int addr, u32 val);
 
-/* Registers IO */
-void wl1271_spi_reg_read(struct wl1271 *wl, int addr, void *buf, size_t len,
-			 bool fixed);
-void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
-			  bool fixed);
-u32 wl1271_reg_read32(struct wl1271 *wl, int addr);
-void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val);
+/* Top Register IO */
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
 
 /* INIT and RESET words */
 void wl1271_spi_reset(struct wl1271 *wl);
 void wl1271_spi_init(struct wl1271 *wl);
 int wl1271_set_partition(struct wl1271 *wl,
-			 u32 part_start, u32 part_size,
-			 u32 reg_start,  u32 reg_size);
+			 struct wl1271_partition_set *p);
 
-static inline u32 wl1271_read32(struct wl1271 *wl, int addr)
+static inline u32 wl1271_raw_read32(struct wl1271 *wl, int addr)
 {
-	wl1271_spi_read(wl, addr, &wl->buffer_32,
-			sizeof(wl->buffer_32), false);
+	wl1271_spi_raw_read(wl, addr, &wl->buffer_32,
+			    sizeof(wl->buffer_32), false);
 
 	return wl->buffer_32;
 }
 
-static inline void wl1271_write32(struct wl1271 *wl, int addr, u32 val)
+static inline void wl1271_raw_write32(struct wl1271 *wl, int addr, u32 val)
 {
 	wl->buffer_32 = val;
-	wl1271_spi_write(wl, addr, &wl->buffer_32,
-			 sizeof(wl->buffer_32), false);
+	wl1271_spi_raw_write(wl, addr, &wl->buffer_32,
+			     sizeof(wl->buffer_32), false);
 }
 
 #endif /* __WL1271_SPI_H__ */
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.c b/drivers/net/wireless/wl12xx/wl1271_tx.c
index ff22125..00af065 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.c
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.c
@@ -33,8 +33,7 @@
 static int wl1271_tx_id(struct wl1271 *wl, struct sk_buff *skb)
 {
 	int i;
-
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] == NULL) {
 			wl->tx_frames[i] = skb;
 			return i;
@@ -58,8 +57,8 @@
 	/* approximate the number of blocks required for this packet
 	   in the firmware */
 	/* FIXME: try to figure out what is done here and make it cleaner */
-	total_blocks = (skb->len) >> TX_HW_BLOCK_SHIFT_DIV;
-	excluded = (total_blocks << 2) + (skb->len & 0xff) + 34;
+	total_blocks = (total_len + 20) >> TX_HW_BLOCK_SHIFT_DIV;
+	excluded = (total_blocks << 2) + ((total_len + 20) & 0xff) + 34;
 	total_blocks += (excluded > 252) ? 2 : 1;
 	total_blocks += TX_HW_BLOCK_SPARE;
 
@@ -89,15 +88,25 @@
 {
 	struct wl1271_tx_hw_descr *desc;
 	int pad;
+	u16 tx_attr;
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 
+	/* relocate space for security header */
+	if (extra) {
+		void *framestart = skb->data + sizeof(*desc);
+		u16 fc = *(u16 *)(framestart + extra);
+		int hdrlen = ieee80211_hdrlen(cpu_to_le16(fc));
+		memmove(framestart, framestart + extra, hdrlen);
+	}
+
 	/* configure packet life time */
-	desc->start_time = jiffies_to_usecs(jiffies) - wl->time_offset;
-	desc->life_time = TX_HW_MGMT_PKT_LIFETIME_TU;
+	desc->start_time = cpu_to_le32(jiffies_to_usecs(jiffies) -
+				       wl->time_offset);
+	desc->life_time = cpu_to_le16(TX_HW_MGMT_PKT_LIFETIME_TU);
 
 	/* configure the tx attributes */
-	desc->tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
+	tx_attr = wl->session_counter << TX_HW_ATTR_OFST_SESSION_COUNTER;
 	/* FIXME: do we know the packet priority? can we identify mgmt
 	   packets, and use max prio for them at least? */
 	desc->tid = 0;
@@ -106,11 +115,13 @@
 
 	/* align the length (and store in terms of words) */
 	pad = WL1271_TX_ALIGN(skb->len);
-	desc->length = pad >> 2;
+	desc->length = cpu_to_le16(pad >> 2);
 
 	/* calculate number of padding bytes */
 	pad = pad - skb->len;
-	desc->tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+	tx_attr |= pad << TX_HW_ATTR_OFST_LAST_WORD_PAD;
+
+	desc->tx_attr = cpu_to_le16(tx_attr);
 
 	wl1271_debug(DEBUG_TX, "tx_fill_hdr: pad: %d", pad);
 	return 0;
@@ -147,11 +158,11 @@
 	len = WL1271_TX_ALIGN(skb->len);
 
 	/* perform a fixed address block write with the packet */
-	wl1271_spi_reg_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
+	wl1271_spi_write(wl, WL1271_SLV_MEM_DATA, skb->data, len, true);
 
 	/* write packet new counter into the write access register */
 	wl->tx_packets_count++;
-	wl1271_reg_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
+	wl1271_spi_write32(wl, WL1271_HOST_WR_ACCESS, wl->tx_packets_count);
 
 	desc = (struct wl1271_tx_hw_descr *) skb->data;
 	wl1271_debug(DEBUG_TX, "tx id %u skb 0x%p payload %u (%u words)",
@@ -254,14 +265,13 @@
 static void wl1271_tx_complete_packet(struct wl1271 *wl,
 				      struct wl1271_tx_hw_res_descr *result)
 {
-
 	struct ieee80211_tx_info *info;
 	struct sk_buff *skb;
-	u32 header_len;
+	u16 seq;
 	int id = result->id;
 
 	/* check for id legality */
-	if (id >= TX_HW_RESULT_QUEUE_LEN || wl->tx_frames[id] == NULL) {
+	if (id >= ACX_TX_DESCRIPTORS || wl->tx_frames[id] == NULL) {
 		wl1271_warning("TX result illegal id: %d", id);
 		return;
 	}
@@ -284,22 +294,32 @@
 	/* info->status.retry_count = result->ack_failures; */
 	wl->stats.retry_count += result->ack_failures;
 
-	/* get header len */
+	/* update security sequence number */
+	seq = wl->tx_security_seq_16 +
+		(result->lsb_security_sequence_number -
+		 wl->tx_security_last_seq);
+	wl->tx_security_last_seq = result->lsb_security_sequence_number;
+
+	if (seq < wl->tx_security_seq_16)
+		wl->tx_security_seq_32++;
+	wl->tx_security_seq_16 = seq;
+
+	/* remove private header from packet */
+	skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
+
+	/* remove TKIP header space if present */
 	if (info->control.hw_key &&
-	    info->control.hw_key->alg == ALG_TKIP)
-		header_len = WL1271_TKIP_IV_SPACE +
-			sizeof(struct wl1271_tx_hw_descr);
-	else
-		header_len = sizeof(struct wl1271_tx_hw_descr);
+	    info->control.hw_key->alg == ALG_TKIP) {
+		int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
+		memmove(skb->data + WL1271_TKIP_IV_SPACE, skb->data, hdrlen);
+		skb_pull(skb, WL1271_TKIP_IV_SPACE);
+	}
 
 	wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p failures %u rate 0x%x"
 		     " status 0x%x",
 		     result->id, skb, result->ack_failures,
 		     result->rate_class_index, result->status);
 
-	/* remove private header from packet */
-	skb_pull(skb, header_len);
-
 	/* return the packet to the stack */
 	ieee80211_tx_status(wl->hw, skb);
 	wl->tx_frames[result->id] = NULL;
@@ -315,8 +335,8 @@
 	wl1271_debug(DEBUG_TX, "tx_complete received, packets: %d", count);
 
 	/* read the tx results from the chipset */
-	wl1271_spi_mem_read(wl, memmap->tx_result,
-			    wl->tx_res_if, sizeof(*wl->tx_res_if));
+	wl1271_spi_read(wl, le32_to_cpu(memmap->tx_result),
+			wl->tx_res_if, sizeof(*wl->tx_res_if), false);
 
 	/* verify that the result buffer is not getting overrun */
 	if (count > TX_HW_RESULT_QUEUE_LEN) {
@@ -337,10 +357,10 @@
 	}
 
 	/* write host counter to chipset (to ack) */
-	wl1271_mem_write32(wl, memmap->tx_result +
+	wl1271_spi_write32(wl, le32_to_cpu(memmap->tx_result) +
 			   offsetof(struct wl1271_tx_hw_res_if,
 				    tx_result_host_counter),
-			   wl->tx_res_if->tx_result_fw_counter);
+			   le32_to_cpu(wl->tx_res_if->tx_result_fw_counter));
 }
 
 /* caller must hold wl->mutex */
@@ -364,7 +384,7 @@
 		ieee80211_tx_status(wl->hw, skb);
 	}
 
-	for (i = 0; i < FW_TX_CMPLT_BLOCK_SIZE; i++)
+	for (i = 0; i < ACX_TX_DESCRIPTORS; i++)
 		if (wl->tx_frames[i] != NULL) {
 			skb = wl->tx_frames[i];
 			info = IEEE80211_SKB_CB(skb);
diff --git a/drivers/net/wireless/wl12xx/wl1271_tx.h b/drivers/net/wireless/wl12xx/wl1271_tx.h
index 4a61406..416396c 100644
--- a/drivers/net/wireless/wl12xx/wl1271_tx.h
+++ b/drivers/net/wireless/wl12xx/wl1271_tx.h
@@ -58,7 +58,7 @@
 
 struct wl1271_tx_hw_descr {
 	/* Length of packet in words, including descriptor+header+data */
-	u16 length;
+	__le16 length;
 	/* Number of extra memory blocks to allocate for this packet in
 	   addition to the number of blocks derived from the packet length */
 	u8 extra_mem_blocks;
@@ -67,12 +67,12 @@
 	   HW!! */
 	u8 total_mem_blocks;
 	/* Device time (in us) when the packet arrived to the driver */
-	u32 start_time;
+	__le32 start_time;
 	/* Max delay in TUs until transmission. The last device time the
 	   packet can be transmitted is: startTime+(1024*LifeTime) */
-	u16 life_time;
+	__le16 life_time;
 	/* Bitwise fields - see TX_ATTR... definitions above. */
-	u16 tx_attr;
+	__le16 tx_attr;
 	/* Packet identifier used also in the Tx-Result. */
 	u8 id;
 	/* The packet TID value (as User-Priority) */
@@ -100,12 +100,12 @@
 	   several possible reasons for failure. */
 	u8 status;
 	/* Total air access duration including all retrys and overheads.*/
-	u16 medium_usage;
+	__le16 medium_usage;
 	/* The time passed from host xfer to Tx-complete.*/
-	u32 fw_handling_time;
+	__le32 fw_handling_time;
 	/* Total media delay
 	   (from 1st EDCA AIFS counter until TX Complete). */
-	u32 medium_delay;
+	__le32 medium_delay;
 	/* LS-byte of last TKIP seq-num (saved per AC for recovery). */
 	u8 lsb_security_sequence_number;
 	/* Retry count - number of transmissions without successful ACK.*/
@@ -118,8 +118,8 @@
 } __attribute__ ((packed));
 
 struct wl1271_tx_hw_res_if {
-	u32 tx_result_fw_counter;
-	u32 tx_result_host_counter;
+	__le32 tx_result_fw_counter;
+	__le32 tx_result_host_counter;
 	struct wl1271_tx_hw_res_descr tx_results_queue[TX_HW_RESULT_QUEUE_LEN];
 } __attribute__ ((packed));
 
diff --git a/drivers/net/wireless/wl12xx/wl12xx_80211.h b/drivers/net/wireless/wl12xx/wl12xx_80211.h
index 657c2db..055d7bc 100644
--- a/drivers/net/wireless/wl12xx/wl12xx_80211.h
+++ b/drivers/net/wireless/wl12xx/wl12xx_80211.h
@@ -122,8 +122,8 @@
 } __attribute__ ((packed));
 
 struct wl12xx_ps_poll_template {
-	u16 fc;
-	u16 aid;
+	__le16 fc;
+	__le16 aid;
 	u8 bssid[ETH_ALEN];
 	u8 ta[ETH_ALEN];
 } __attribute__ ((packed));
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.c b/drivers/net/wireless/zd1211rw/zd_chip.c
index 4e79a98..dfa1b9bc 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.c
+++ b/drivers/net/wireless/zd1211rw/zd_chip.c
@@ -755,7 +755,7 @@
 static int zd1211_hw_init_hmac(struct zd_chip *chip)
 {
 	static const struct zd_ioreq32 ioreqs[] = {
-		{ CR_ZD1211_RETRY_MAX,		0x2 },
+		{ CR_ZD1211_RETRY_MAX,		ZD1211_RETRY_COUNT },
 		{ CR_RX_THRESHOLD,		0x000c0640 },
 	};
 
@@ -767,7 +767,7 @@
 static int zd1211b_hw_init_hmac(struct zd_chip *chip)
 {
 	static const struct zd_ioreq32 ioreqs[] = {
-		{ CR_ZD1211B_RETRY_MAX,		0x02020202 },
+		{ CR_ZD1211B_RETRY_MAX,		ZD1211B_RETRY_COUNT },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC0,	0x007f003f },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC1,	0x007f003f },
 		{ CR_ZD1211B_CWIN_MAX_MIN_AC2,  0x003f001f },
diff --git a/drivers/net/wireless/zd1211rw/zd_chip.h b/drivers/net/wireless/zd1211rw/zd_chip.h
index 678c139..9fd8f35 100644
--- a/drivers/net/wireless/zd1211rw/zd_chip.h
+++ b/drivers/net/wireless/zd1211rw/zd_chip.h
@@ -642,13 +642,29 @@
 #define CR_ZD1211B_TXOP			CTL_REG(0x0b20)
 #define CR_ZD1211B_RETRY_MAX		CTL_REG(0x0b28)
 
+/* Value for CR_ZD1211_RETRY_MAX & CR_ZD1211B_RETRY_MAX. Vendor driver uses 2,
+ * we use 0. The first rate is tried (count+2), then all next rates are tried
+ * twice, until 1 Mbits is tried. */
+#define	ZD1211_RETRY_COUNT		0
+#define	ZD1211B_RETRY_COUNT	\
+	(ZD1211_RETRY_COUNT <<  0)|	\
+	(ZD1211_RETRY_COUNT <<  8)|	\
+	(ZD1211_RETRY_COUNT << 16)|	\
+	(ZD1211_RETRY_COUNT << 24)
+
 /* Used to detect PLL lock */
 #define UW2453_INTR_REG			((zd_addr_t)0x85c1)
 
 #define CWIN_SIZE			0x007f043f
 
 
-#define HWINT_ENABLED			0x004f0000
+#define HWINT_ENABLED			\
+	(INT_TX_COMPLETE_EN|		\
+	 INT_RX_COMPLETE_EN|		\
+	 INT_RETRY_FAIL_EN|		\
+	 INT_WAKEUP_EN|			\
+	 INT_CFG_NEXT_BCN_EN)
+
 #define HWINT_DISABLED			0
 
 #define E2P_PWR_INT_GUARD		8
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d66635..8a243732 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -88,6 +88,34 @@
 	  .flags = 0 },
 };
 
+/*
+ * Zydas retry rates table. Each line is listed in the same order as
+ * in zd_rates[] and contains all the rate used when a packet is sent
+ * starting with a given rates. Let's consider an example :
+ *
+ * "11 Mbits : 4, 3, 2, 1, 0" means :
+ * - packet is sent using 4 different rates
+ * - 1st rate is index 3 (ie 11 Mbits)
+ * - 2nd rate is index 2 (ie 5.5 Mbits)
+ * - 3rd rate is index 1 (ie 2 Mbits)
+ * - 4th rate is index 0 (ie 1 Mbits)
+ */
+
+static const struct tx_retry_rate zd_retry_rates[] = {
+	{ /*  1 Mbits */	1, { 0 }},
+	{ /*  2 Mbits */	2, { 1,  0 }},
+	{ /*  5.5 Mbits */	3, { 2,  1, 0 }},
+	{ /* 11 Mbits */	4, { 3,  2, 1, 0 }},
+	{ /*  6 Mbits */	5, { 4,  3, 2, 1, 0 }},
+	{ /*  9 Mbits */	6, { 5,  4, 3, 2, 1, 0}},
+	{ /* 12 Mbits */	5, { 6,  3, 2, 1, 0 }},
+	{ /* 18 Mbits */	6, { 7,  6, 3, 2, 1, 0 }},
+	{ /* 24 Mbits */	6, { 8,  6, 3, 2, 1, 0 }},
+	{ /* 36 Mbits */	7, { 9,  8, 6, 3, 2, 1, 0 }},
+	{ /* 48 Mbits */	8, {10,  9, 8, 6, 3, 2, 1, 0 }},
+	{ /* 54 Mbits */	9, {11, 10, 9, 8, 6, 3, 2, 1, 0 }}
+};
+
 static const struct ieee80211_channel zd_channels[] = {
 	{ .center_freq = 2412, .hw_value = 1 },
 	{ .center_freq = 2417, .hw_value = 2 },
@@ -282,7 +310,7 @@
 }
 
 /**
- * tx_status - reports tx status of a packet if required
+ * zd_mac_tx_status - reports tx status of a packet if required
  * @hw - a &struct ieee80211_hw pointer
  * @skb - a sk-buffer
  * @flags: extra flags to set in the TX status info
@@ -295,15 +323,49 @@
  *
  * If no status information has been requested, the skb is freed.
  */
-static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
-		      int ackssi, bool success)
+static void zd_mac_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
+		      int ackssi, struct tx_status *tx_status)
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+	int i;
+	int success = 1, retry = 1;
+	int first_idx;
+	const struct tx_retry_rate *retries;
 
 	ieee80211_tx_info_clear_status(info);
 
-	if (success)
+	if (tx_status) {
+		success = !tx_status->failure;
+		retry = tx_status->retry + success;
+	}
+
+	if (success) {
+		/* success */
 		info->flags |= IEEE80211_TX_STAT_ACK;
+	} else {
+		/* failure */
+		info->flags &= ~IEEE80211_TX_STAT_ACK;
+	}
+
+	first_idx = info->status.rates[0].idx;
+	ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+	retries = &zd_retry_rates[first_idx];
+	ZD_ASSERT(0<=retry && retry<=retries->count);
+
+	info->status.rates[0].idx = retries->rate[0];
+	info->status.rates[0].count = 1; // (retry > 1 ? 2 : 1);
+
+	for (i=1; i<IEEE80211_TX_MAX_RATES-1 && i<retry; i++) {
+		info->status.rates[i].idx = retries->rate[i];
+		info->status.rates[i].count = 1; // ((i==retry-1) && success ? 1:2);
+	}
+	for (; i<IEEE80211_TX_MAX_RATES && i<retry; i++) {
+		info->status.rates[i].idx = retries->rate[retry-1];
+		info->status.rates[i].count = 1; // (success ? 1:2);
+	}
+	if (i<IEEE80211_TX_MAX_RATES)
+		info->status.rates[i].idx = -1; /* terminate */
+
 	info->status.ack_signal = ackssi;
 	ieee80211_tx_status_irqsafe(hw, skb);
 }
@@ -316,16 +378,79 @@
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */
-void zd_mac_tx_failed(struct ieee80211_hw *hw)
+void zd_mac_tx_failed(struct urb *urb)
 {
-	struct sk_buff_head *q = &zd_hw_mac(hw)->ack_wait_queue;
+	struct ieee80211_hw * hw = zd_usb_to_hw(urb->context);
+	struct zd_mac *mac = zd_hw_mac(hw);
+	struct sk_buff_head *q = &mac->ack_wait_queue;
 	struct sk_buff *skb;
+	struct tx_status *tx_status = (struct tx_status *)urb->transfer_buffer;
+	unsigned long flags;
+	int success = !tx_status->failure;
+	int retry = tx_status->retry + success;
+	int found = 0;
+	int i, position = 0;
 
-	skb = skb_dequeue(q);
-	if (skb == NULL)
-		return;
+	q = &mac->ack_wait_queue;
+	spin_lock_irqsave(&q->lock, flags);
 
-	tx_status(hw, skb, 0, 0);
+	skb_queue_walk(q, skb) {
+		struct ieee80211_hdr *tx_hdr;
+		struct ieee80211_tx_info *info;
+		int first_idx, final_idx;
+		const struct tx_retry_rate *retries;
+		u8 final_rate;
+
+		position ++;
+
+		/* if the hardware reports a failure and we had a 802.11 ACK
+		 * pending, then we skip the first skb when searching for a
+		 * matching frame */
+		if (tx_status->failure && mac->ack_pending &&
+		    skb_queue_is_first(q, skb)) {
+			continue;
+		}
+
+		tx_hdr = (struct ieee80211_hdr *)skb->data;
+
+		/* we skip all frames not matching the reported destination */
+		if (unlikely(memcmp(tx_hdr->addr1, tx_status->mac, ETH_ALEN))) {
+			continue;
+		}
+
+		/* we skip all frames not matching the reported final rate */
+
+		info = IEEE80211_SKB_CB(skb);
+		first_idx = info->status.rates[0].idx;
+		ZD_ASSERT(0<=first_idx && first_idx<ARRAY_SIZE(zd_retry_rates));
+		retries = &zd_retry_rates[first_idx];
+		if (retry < 0 || retry > retries->count) {
+			continue;
+		}
+
+		ZD_ASSERT(0<=retry && retry<=retries->count);
+		final_idx = retries->rate[retry-1];
+		final_rate = zd_rates[final_idx].hw_value;
+
+		if (final_rate != tx_status->rate) {
+			continue;
+		}
+
+		found = 1;
+		break;
+	}
+
+	if (found) {
+		for (i=1; i<=position; i++) {
+			skb = __skb_dequeue(q);
+			zd_mac_tx_status(hw, skb,
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 i == position ? tx_status : NULL);
+			mac->ack_pending = 0;
+		}
+	}
+
+	spin_unlock_irqrestore(&q->lock, flags);
 }
 
 /**
@@ -342,18 +467,27 @@
 {
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_hw *hw = info->rate_driver_data[0];
+	struct zd_mac *mac = zd_hw_mac(hw);
+
+	ieee80211_tx_info_clear_status(info);
 
 	skb_pull(skb, sizeof(struct zd_ctrlset));
 	if (unlikely(error ||
 	    (info->flags & IEEE80211_TX_CTL_NO_ACK))) {
-		tx_status(hw, skb, 0, !error);
+		/*
+		 * FIXME : do we need to fill in anything ?
+		 */
+		ieee80211_tx_status_irqsafe(hw, skb);
 	} else {
-		struct sk_buff_head *q =
-			&zd_hw_mac(hw)->ack_wait_queue;
+		struct sk_buff_head *q = &mac->ack_wait_queue;
 
 		skb_queue_tail(q, skb);
-		while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS)
-			zd_mac_tx_failed(hw);
+		while (skb_queue_len(q) > ZD_MAC_MAX_ACK_WAITERS) {
+			zd_mac_tx_status(hw, skb_dequeue(q),
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 NULL);
+			mac->ack_pending = 0;
+		}
 	}
 }
 
@@ -606,27 +740,47 @@
 static int filter_ack(struct ieee80211_hw *hw, struct ieee80211_hdr *rx_hdr,
 		      struct ieee80211_rx_status *stats)
 {
+	struct zd_mac *mac = zd_hw_mac(hw);
 	struct sk_buff *skb;
 	struct sk_buff_head *q;
 	unsigned long flags;
+	int found = 0;
+	int i, position = 0;
 
 	if (!ieee80211_is_ack(rx_hdr->frame_control))
 		return 0;
 
-	q = &zd_hw_mac(hw)->ack_wait_queue;
+	q = &mac->ack_wait_queue;
 	spin_lock_irqsave(&q->lock, flags);
 	skb_queue_walk(q, skb) {
 		struct ieee80211_hdr *tx_hdr;
 
+		position ++;
+
+		if (mac->ack_pending && skb_queue_is_first(q, skb))
+		    continue;
+
 		tx_hdr = (struct ieee80211_hdr *)skb->data;
 		if (likely(!memcmp(tx_hdr->addr2, rx_hdr->addr1, ETH_ALEN)))
 		{
-			__skb_unlink(skb, q);
-			tx_status(hw, skb, stats->signal, 1);
-			goto out;
+			found = 1;
+			break;
 		}
 	}
-out:
+
+	if (found) {
+		for (i=1; i<position; i++) {
+			skb = __skb_dequeue(q);
+			zd_mac_tx_status(hw, skb,
+					 mac->ack_pending ? mac->ack_signal : 0,
+					 NULL);
+			mac->ack_pending = 0;
+		}
+
+		mac->ack_pending = 1;
+		mac->ack_signal = stats->signal;
+	}
+
 	spin_unlock_irqrestore(&q->lock, flags);
 	return 1;
 }
@@ -709,6 +863,7 @@
 		skb_reserve(skb, 2);
 	}
 
+	/* FIXME : could we avoid this big memcpy ? */
 	memcpy(skb_put(skb, length), buffer, length);
 
 	memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats));
@@ -999,7 +1154,14 @@
 	hw->queues = 1;
 	hw->extra_tx_headroom = sizeof(struct zd_ctrlset);
 
+	/*
+	 * Tell mac80211 that we support multi rate retries
+	 */
+	hw->max_rates = IEEE80211_TX_MAX_RATES;
+	hw->max_rate_tries = 18;	/* 9 rates * 2 retries/rate */
+
 	skb_queue_head_init(&mac->ack_wait_queue);
+	mac->ack_pending = 0;
 
 	zd_chip_init(&mac->chip, hw, intf);
 	housekeeping_init(mac);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.h b/drivers/net/wireless/zd1211rw/zd_mac.h
index 7c27591..630c298 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.h
+++ b/drivers/net/wireless/zd1211rw/zd_mac.h
@@ -140,6 +140,21 @@
 #define ZD_RX_CRC16_ERROR		0x40
 #define ZD_RX_ERROR			0x80
 
+struct tx_retry_rate {
+	int count;	/* number of valid element in rate[] array */
+	int rate[10];	/* retry rates, described by an index in zd_rates[] */
+};
+
+struct tx_status {
+	u8 type;	/* must always be 0x01 : USB_INT_TYPE */
+	u8 id;		/* must always be 0xa0 : USB_INT_ID_RETRY_FAILED */
+	u8 rate;
+	u8 pad;
+	u8 mac[ETH_ALEN];
+	u8 retry;
+	u8 failure;
+} __attribute__((packed));
+
 enum mac_flags {
 	MAC_FIXED_CHANNEL = 0x01,
 };
@@ -150,7 +165,7 @@
 
 #define ZD_MAC_STATS_BUFFER_SIZE 16
 
-#define ZD_MAC_MAX_ACK_WAITERS 10
+#define ZD_MAC_MAX_ACK_WAITERS 50
 
 struct zd_mac {
 	struct zd_chip chip;
@@ -184,6 +199,12 @@
 
 	/* whether to pass control frames to stack */
 	unsigned int pass_ctrl:1;
+
+	/* whether we have received a 802.11 ACK that is pending */
+	unsigned int ack_pending:1;
+
+	/* signal strength of the last 802.11 ACK received */
+	int ack_signal;
 };
 
 #define ZD_REGDOMAIN_FCC	0x10
@@ -279,7 +300,7 @@
 int zd_mac_init_hw(struct ieee80211_hw *hw);
 
 int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length);
-void zd_mac_tx_failed(struct ieee80211_hw *hw);
+void zd_mac_tx_failed(struct urb *urb);
 void zd_mac_tx_to_dev(struct sk_buff *skb, int error);
 
 #ifdef DEBUG
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 23a6a6d..d46f20a 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -419,7 +419,7 @@
 		handle_regs_int(urb);
 		break;
 	case USB_INT_ID_RETRY_FAILED:
-		zd_mac_tx_failed(zd_usb_to_hw(urb->context));
+		zd_mac_tx_failed(urb);
 		break;
 	default:
 		dev_dbg_f(urb_dev(urb), "error: urb %p unknown id %x\n", urb,
@@ -553,6 +553,8 @@
 
 	if (length < sizeof(struct rx_length_info)) {
 		/* It's not a complete packet anyhow. */
+		printk("%s: invalid, small RX packet : %d\n",
+		       __func__, length);
 		return;
 	}
 	length_info = (struct rx_length_info *)
diff --git a/drivers/pci/hotplug/acpiphp_ibm.c b/drivers/pci/hotplug/acpiphp_ibm.c
index a9d926b..e7be66d 100644
--- a/drivers/pci/hotplug/acpiphp_ibm.c
+++ b/drivers/pci/hotplug/acpiphp_ibm.c
@@ -406,7 +406,6 @@
 			__func__, status);
 		return retval;
 	}
-	info->hardware_id.string[sizeof(info->hardware_id.length) - 1] = '\0';
 
 	if (info->current_status && (info->valid & ACPI_VALID_HID) &&
 			(!strcmp(info->hardware_id.string, IBM_HARDWARE_ID1) ||
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index fbf965b..17f38a7 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -192,6 +192,10 @@
 	tristate "Au1x00 pcmcia support"
 	depends on SOC_AU1X00 && PCMCIA
 
+config PCMCIA_BCM63XX
+	tristate "bcm63xx pcmcia support"
+	depends on BCM63XX && PCMCIA
+
 config PCMCIA_SA1100
 	tristate "SA1100 support"
 	depends on ARM && ARCH_SA1100 && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 047394d..a03a38a 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -27,6 +27,7 @@
 obj-$(CONFIG_M32R_PCC)				+= m32r_pcc.o
 obj-$(CONFIG_M32R_CFC)				+= m32r_cfc.o
 obj-$(CONFIG_PCMCIA_AU1X00)			+= au1x00_ss.o
+obj-$(CONFIG_PCMCIA_BCM63XX)			+= bcm63xx_pcmcia.o
 obj-$(CONFIG_PCMCIA_VRC4171)			+= vrc4171_card.o
 obj-$(CONFIG_PCMCIA_VRC4173)			+= vrc4173_cardu.o
 obj-$(CONFIG_OMAP_CF)				+= omap_cf.o
@@ -71,6 +72,7 @@
 pxa2xx-obj-$(CONFIG_ARCH_VIPER)			+= pxa2xx_viper.o
 pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA)		+= pxa2xx_trizeps4.o
 pxa2xx-obj-$(CONFIG_MACH_PALMTX)		+= pxa2xx_palmtx.o
+pxa2xx-obj-$(CONFIG_MACH_PALMTC)		+= pxa2xx_palmtc.o
 pxa2xx-obj-$(CONFIG_MACH_PALMLD)		+= pxa2xx_palmld.o
 pxa2xx-obj-$(CONFIG_MACH_E740)			+= pxa2xx_e740.o
 pxa2xx-obj-$(CONFIG_MACH_STARGATE2)		+= pxa2xx_stargate2.o
diff --git a/drivers/pcmcia/at91_cf.c b/drivers/pcmcia/at91_cf.c
index 9e1140f..e1dcced 100644
--- a/drivers/pcmcia/at91_cf.c
+++ b/drivers/pcmcia/at91_cf.c
@@ -363,7 +363,7 @@
 	struct at91_cf_socket	*cf = platform_get_drvdata(pdev);
 	struct at91_cf_data	*board = cf->board;
 
-	pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	pcmcia_socket_dev_suspend(&pdev->dev);
 	if (device_may_wakeup(&pdev->dev)) {
 		enable_irq_wake(board->det_pin);
 		if (board->irq_pin)
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 9001334..0208870 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -515,7 +515,7 @@
 static int au1x00_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int au1x00_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.c b/drivers/pcmcia/bcm63xx_pcmcia.c
new file mode 100644
index 0000000..bc88a3b
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.c
@@ -0,0 +1,536 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+#include "bcm63xx_pcmcia.h"
+
+#define PFX	"bcm63xx_pcmcia: "
+
+#ifdef CONFIG_CARDBUS
+/* if cardbus is used, platform device needs reference to actual pci
+ * device */
+static struct pci_dev *bcm63xx_cb_dev;
+#endif
+
+/*
+ * read/write helper for pcmcia regs
+ */
+static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
+{
+	return bcm_readl(skt->base + off);
+}
+
+static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
+				 u32 val, u32 off)
+{
+	bcm_writel(val, skt->base + off);
+}
+
+/*
+ * This callback should (re-)initialise the socket, turn on status
+ * interrupts and PCMCIA bus, and wait for power to stabilise so that
+ * the card status signals report correctly.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * This callback should remove power on the socket, disable IRQs from
+ * the card, turn off status interrupts, and disable the PCMCIA bus.
+ *
+ * Hardware cannot do that.
+ */
+static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
+{
+	return 0;
+}
+
+/*
+ * Implements the set_socket() operation for the in-kernel PCMCIA
+ * service (formerly SS_SetSocket in Card Services). We more or
+ * less punt all of this work and let the kernel handle the details
+ * of power configuration, reset, &c. We also record the value of
+ * `state' in order to regurgitate it to the PCMCIA core later.
+ */
+static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
+				     socket_state_t *state)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned long flags;
+	u32 val;
+
+	skt = sock->driver_data;
+
+	spin_lock_irqsave(&skt->lock, flags);
+
+	/* note: hardware cannot control socket power, so we will
+	 * always report SS_POWERON */
+
+	/* apply socket reset */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	if (state->flags & SS_RESET)
+		val |= PCMCIA_C1_RESET_MASK;
+	else
+		val &= ~PCMCIA_C1_RESET_MASK;
+
+	/* reverse reset logic for cardbus card */
+	if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
+		val ^= PCMCIA_C1_RESET_MASK;
+
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/* keep requested state for event reporting */
+	skt->requested_state = *state;
+
+	spin_unlock_irqrestore(&skt->lock, flags);
+
+	return 0;
+}
+
+/*
+ * identity cardtype from VS[12] input, CD[12] input while only VS2 is
+ * floating, and CD[12] input while only VS1 is floating
+ */
+enum {
+	IN_VS1 = (1 << 0),
+	IN_VS2 = (1 << 1),
+	IN_CD1_VS2H = (1 << 2),
+	IN_CD2_VS2H = (1 << 3),
+	IN_CD1_VS1H = (1 << 4),
+	IN_CD2_VS1H = (1 << 5),
+};
+
+static const u8 vscd_to_cardtype[] = {
+
+	/* VS1 float, VS2 float */
+	[IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
+
+	/* VS1 grounded, VS2 float */
+	[IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
+
+	/* VS1 grounded, VS2 grounded */
+	[0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD1, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 grounded, VS2 tied to CD2 */
+	[IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
+
+	/* VS1 tied to CD2, VS2 grounded */
+	[IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
+
+	/* VS1 float, VS2 grounded */
+	[IN_VS1] = (CARD_PCCARD | CARD_XV),
+
+	/* VS1 float, VS2 tied to CD2 */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
+
+	/* VS1 float, VS2 tied to CD1 */
+	[IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
+
+	/* VS1 tied to CD2, VS2 float */
+	[IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
+
+	/* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
+	[IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
+};
+
+/*
+ * poll hardware to check card insertion status
+ */
+static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
+{
+	unsigned int stat;
+	u32 val;
+
+	stat = 0;
+
+	/* check CD for card presence */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+
+	if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
+		stat |= SS_DETECT;
+
+	/* if new insertion, detect cardtype */
+	if ((stat & SS_DETECT) && !skt->card_detected) {
+		unsigned int stat = 0;
+
+		/* float VS1, float VS2 */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read VS[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
+		stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
+
+		/* drive VS1 low, float VS2 */
+		val &= ~PCMCIA_C1_VS1OE_MASK;
+		val |= PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
+
+		/* float VS1, drive VS2 low */
+		val |= PCMCIA_C1_VS1OE_MASK;
+		val &= ~PCMCIA_C1_VS2OE_MASK;
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+		/* wait for output to stabilize and read CD[12] */
+		udelay(10);
+		val = pcmcia_readl(skt, PCMCIA_C1_REG);
+		stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
+		stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
+
+		/* guess cardtype from all this */
+		skt->card_type = vscd_to_cardtype[stat];
+		if (!skt->card_type)
+			dev_err(&skt->socket.dev, "unsupported card type\n");
+
+		/* drive both VS pin to 0 again */
+		val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
+
+		/* enable correct logic */
+		val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
+		if (skt->card_type & CARD_PCCARD)
+			val |= PCMCIA_C1_EN_PCMCIA_MASK;
+		else
+			val |= PCMCIA_C1_EN_CARDBUS_MASK;
+
+		pcmcia_writel(skt, val, PCMCIA_C1_REG);
+	}
+	skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
+
+	/* report card type/voltage */
+	if (skt->card_type & CARD_CARDBUS)
+		stat |= SS_CARDBUS;
+	if (skt->card_type & CARD_3V)
+		stat |= SS_3VCARD;
+	if (skt->card_type & CARD_XV)
+		stat |= SS_XVCARD;
+	stat |= SS_POWERON;
+
+	if (gpio_get_value(skt->pd->ready_gpio))
+		stat |= SS_READY;
+
+	return stat;
+}
+
+/*
+ * core request to get current socket status
+ */
+static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
+				     unsigned int *status)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+
+	skt = sock->driver_data;
+
+	spin_lock_bh(&skt->lock);
+	*status = __get_socket_status(skt);
+	spin_unlock_bh(&skt->lock);
+
+	return 0;
+}
+
+/*
+ * socket polling timer callback
+ */
+static void bcm63xx_pcmcia_poll(unsigned long data)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	unsigned int stat, events;
+
+	skt = (struct bcm63xx_pcmcia_socket *)data;
+
+	spin_lock_bh(&skt->lock);
+
+	stat = __get_socket_status(skt);
+
+	/* keep only changed bits, and mask with required one from the
+	 * core */
+	events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
+	skt->old_status = stat;
+	spin_unlock_bh(&skt->lock);
+
+	if (events)
+		pcmcia_parse_events(&skt->socket, events);
+
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+}
+
+static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
+				     struct pccard_io_map *map)
+{
+	/* this doesn't seem to be called by pcmcia layer if static
+	 * mapping is used */
+	return 0;
+}
+
+static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
+				      struct pccard_mem_map *map)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = sock->driver_data;
+	if (map->flags & MAP_ATTRIB)
+		res = skt->attr_res;
+	else
+		res = skt->common_res;
+
+	map->static_start = res->start + map->card_start;
+	return 0;
+}
+
+static struct pccard_operations bcm63xx_pcmcia_operations = {
+	.init			= bcm63xx_pcmcia_sock_init,
+	.suspend		= bcm63xx_pcmcia_suspend,
+	.get_status		= bcm63xx_pcmcia_get_status,
+	.set_socket		= bcm63xx_pcmcia_set_socket,
+	.set_io_map		= bcm63xx_pcmcia_set_io_map,
+	.set_mem_map		= bcm63xx_pcmcia_set_mem_map,
+};
+
+/*
+ * register pcmcia socket to core
+ */
+static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct pcmcia_socket *sock;
+	struct resource *res, *irq_res;
+	unsigned int regmem_size = 0, iomem_size = 0;
+	u32 val;
+	int ret;
+
+	skt = kzalloc(sizeof(*skt), GFP_KERNEL);
+	if (!skt)
+		return -ENOMEM;
+	spin_lock_init(&skt->lock);
+	sock = &skt->socket;
+	sock->driver_data = skt;
+
+	/* make sure we have all resources we need */
+	skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+	irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	skt->pd = pdev->dev.platform_data;
+	if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* remap pcmcia registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	regmem_size = resource_size(res);
+	if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
+		ret = -EINVAL;
+		goto err;
+	}
+	skt->reg_res = res;
+
+	skt->base = ioremap(res->start, regmem_size);
+	if (!skt->base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* remap io registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+	iomem_size = resource_size(res);
+	skt->io_base = ioremap(res->start, iomem_size);
+	if (!skt->io_base) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	/* resources are static */
+	sock->resource_ops = &pccard_static_ops;
+	sock->ops = &bcm63xx_pcmcia_operations;
+	sock->owner = THIS_MODULE;
+	sock->dev.parent = &pdev->dev;
+	sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+	sock->io_offset = (unsigned long)skt->io_base;
+	sock->pci_irq = irq_res->start;
+
+#ifdef CONFIG_CARDBUS
+	sock->cb_dev = bcm63xx_cb_dev;
+	if (bcm63xx_cb_dev)
+		sock->features |= SS_CAP_CARDBUS;
+#endif
+
+	/* assume common & attribute memory have the same size */
+	sock->map_size = resource_size(skt->common_res);
+
+	/* initialize polling timer */
+	setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
+
+	/* initialize  pcmcia  control register,  drive  VS[12] to  0,
+	 * leave CB IDSEL to the old  value since it is set by the PCI
+	 * layer */
+	val = pcmcia_readl(skt, PCMCIA_C1_REG);
+	val &= PCMCIA_C1_CBIDSEL_MASK;
+	val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
+	pcmcia_writel(skt, val, PCMCIA_C1_REG);
+
+	/*
+	 * Hardware has only one set of timings registers, not one for
+	 * each memory access type, so we configure them for the
+	 * slowest one: attribute memory.
+	 */
+	val = PCMCIA_C2_DATA16_MASK;
+	val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
+	val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
+	val |= 3 << PCMCIA_C2_SETUP_SHIFT;
+	val |= 3 << PCMCIA_C2_HOLD_SHIFT;
+	pcmcia_writel(skt, val, PCMCIA_C2_REG);
+
+	ret = pcmcia_register_socket(sock);
+	if (ret)
+		goto err;
+
+	/* start polling socket */
+	mod_timer(&skt->timer,
+		  jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
+
+	platform_set_drvdata(pdev, skt);
+	return 0;
+
+err:
+	if (skt->io_base)
+		iounmap(skt->io_base);
+	if (skt->base)
+		iounmap(skt->base);
+	if (skt->reg_res)
+		release_mem_region(skt->reg_res->start, regmem_size);
+	kfree(skt);
+	return ret;
+}
+
+static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
+{
+	struct bcm63xx_pcmcia_socket *skt;
+	struct resource *res;
+
+	skt = platform_get_drvdata(pdev);
+	del_timer_sync(&skt->timer);
+	iounmap(skt->base);
+	iounmap(skt->io_base);
+	res = skt->reg_res;
+	release_mem_region(res->start, resource_size(res));
+	kfree(skt);
+	return 0;
+}
+
+struct platform_driver bcm63xx_pcmcia_driver = {
+	.probe	= bcm63xx_drv_pcmcia_probe,
+	.remove	= __devexit_p(bcm63xx_drv_pcmcia_remove),
+	.driver	= {
+		.name	= "bcm63xx_pcmcia",
+		.owner  = THIS_MODULE,
+	},
+};
+
+#ifdef CONFIG_CARDBUS
+static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
+				      const struct pci_device_id *id)
+{
+	/* keep pci device */
+	bcm63xx_cb_dev = dev;
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+}
+
+static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
+{
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+	bcm63xx_cb_dev = NULL;
+}
+
+static struct pci_device_id bcm63xx_cb_table[] = {
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6348_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{
+		.vendor		= PCI_VENDOR_ID_BROADCOM,
+		.device		= BCM6358_CPU_ID,
+		.subvendor	= PCI_VENDOR_ID_BROADCOM,
+		.subdevice	= PCI_ANY_ID,
+		.class		= PCI_CLASS_BRIDGE_CARDBUS << 8,
+		.class_mask	= ~0,
+	},
+
+	{ },
+};
+
+MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
+
+static struct pci_driver bcm63xx_cardbus_driver = {
+	.name		= "bcm63xx_cardbus",
+	.id_table	= bcm63xx_cb_table,
+	.probe		= bcm63xx_cb_probe,
+	.remove		= __devexit_p(bcm63xx_cb_exit),
+};
+#endif
+
+/*
+ * if cardbus support is enabled, register our platform device after
+ * our fake cardbus bridge has been registered
+ */
+static int __init bcm63xx_pcmcia_init(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_register_driver(&bcm63xx_cardbus_driver);
+#else
+	return platform_driver_register(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+static void __exit bcm63xx_pcmcia_exit(void)
+{
+#ifdef CONFIG_CARDBUS
+	return pci_unregister_driver(&bcm63xx_cardbus_driver);
+#else
+	platform_driver_unregister(&bcm63xx_pcmcia_driver);
+#endif
+}
+
+module_init(bcm63xx_pcmcia_init);
+module_exit(bcm63xx_pcmcia_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
diff --git a/drivers/pcmcia/bcm63xx_pcmcia.h b/drivers/pcmcia/bcm63xx_pcmcia.h
new file mode 100644
index 0000000..ed95739
--- /dev/null
+++ b/drivers/pcmcia/bcm63xx_pcmcia.h
@@ -0,0 +1,60 @@
+#ifndef BCM63XX_PCMCIA_H_
+#define BCM63XX_PCMCIA_H_
+
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <pcmcia/ss.h>
+#include <bcm63xx_dev_pcmcia.h>
+
+/* socket polling rate in ms */
+#define BCM63XX_PCMCIA_POLL_RATE	500
+
+enum {
+	CARD_CARDBUS = (1 << 0),
+	CARD_PCCARD = (1 << 1),
+	CARD_5V = (1 << 2),
+	CARD_3V = (1 << 3),
+	CARD_XV = (1 << 4),
+	CARD_YV = (1 << 5),
+};
+
+struct bcm63xx_pcmcia_socket {
+	struct pcmcia_socket socket;
+
+	/* platform specific data */
+	struct bcm63xx_pcmcia_platform_data *pd;
+
+	/* all regs access are protected by this spinlock */
+	spinlock_t lock;
+
+	/* pcmcia registers resource */
+	struct resource *reg_res;
+
+	/* base remapped address of registers */
+	void __iomem *base;
+
+	/* whether a card is detected at the moment */
+	int card_detected;
+
+	/* type of detected card (mask of above enum) */
+	u8 card_type;
+
+	/* keep last socket status to implement event reporting */
+	unsigned int old_status;
+
+	/* backup of requested socket state */
+	socket_state_t requested_state;
+
+	/* timer used for socket status polling */
+	struct timer_list timer;
+
+	/* attribute/common memory resources */
+	struct resource *attr_res;
+	struct resource *common_res;
+	struct resource *io_res;
+
+	/* base address of io memory */
+	void __iomem *io_base;
+};
+
+#endif /* BCM63XX_PCMCIA_H_ */
diff --git a/drivers/pcmcia/bfin_cf_pcmcia.c b/drivers/pcmcia/bfin_cf_pcmcia.c
index b59d411..300b368 100644
--- a/drivers/pcmcia/bfin_cf_pcmcia.c
+++ b/drivers/pcmcia/bfin_cf_pcmcia.c
@@ -302,7 +302,7 @@
 
 static int bfin_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int bfin_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/cs.c b/drivers/pcmcia/cs.c
index 0660ad1..934d4be 100644
--- a/drivers/pcmcia/cs.c
+++ b/drivers/pcmcia/cs.c
@@ -101,7 +101,7 @@
 static int socket_resume(struct pcmcia_socket *skt);
 static int socket_suspend(struct pcmcia_socket *skt);
 
-int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state)
+int pcmcia_socket_dev_suspend(struct device *dev)
 {
 	struct pcmcia_socket *socket;
 
diff --git a/drivers/pcmcia/i82092.c b/drivers/pcmcia/i82092.c
index 46561fa..a04f21c 100644
--- a/drivers/pcmcia/i82092.c
+++ b/drivers/pcmcia/i82092.c
@@ -42,7 +42,7 @@
 #ifdef CONFIG_PM
 static int i82092aa_socket_suspend (struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82092aa_socket_resume (struct pci_dev *dev)
diff --git a/drivers/pcmcia/i82365.c b/drivers/pcmcia/i82365.c
index 40d4953..b906abe 100644
--- a/drivers/pcmcia/i82365.c
+++ b/drivers/pcmcia/i82365.c
@@ -1241,7 +1241,7 @@
 static int i82365_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int i82365_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_cfc.c b/drivers/pcmcia/m32r_cfc.c
index 62b4ecc..d1d89c4 100644
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@@ -699,7 +699,7 @@
 static int cfc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int cfc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m32r_pcc.c b/drivers/pcmcia/m32r_pcc.c
index 12034b4..a065583 100644
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@@ -675,7 +675,7 @@
 static int pcc_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcc_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/m8xx_pcmcia.c b/drivers/pcmcia/m8xx_pcmcia.c
index d1ad096..c69f2c4 100644
--- a/drivers/pcmcia/m8xx_pcmcia.c
+++ b/drivers/pcmcia/m8xx_pcmcia.c
@@ -1296,7 +1296,7 @@
 #ifdef CONFIG_PM
 static int m8xx_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, state);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int m8xx_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/omap_cf.c b/drivers/pcmcia/omap_cf.c
index f373639..68570bc 100644
--- a/drivers/pcmcia/omap_cf.c
+++ b/drivers/pcmcia/omap_cf.c
@@ -334,7 +334,7 @@
 
 static int omap_cf_suspend(struct platform_device *pdev, pm_message_t mesg)
 {
-	return pcmcia_socket_dev_suspend(&pdev->dev, mesg);
+	return pcmcia_socket_dev_suspend(&pdev->dev);
 }
 
 static int omap_cf_resume(struct platform_device *pdev)
diff --git a/drivers/pcmcia/pd6729.c b/drivers/pcmcia/pd6729.c
index 8bed1da..1c39d34 100644
--- a/drivers/pcmcia/pd6729.c
+++ b/drivers/pcmcia/pd6729.c
@@ -758,7 +758,7 @@
 #ifdef CONFIG_PM
 static int pd6729_socket_suspend(struct pci_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pd6729_socket_resume(struct pci_dev *dev)
diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c
index c49a726..0e35acb 100644
--- a/drivers/pcmcia/pxa2xx_base.c
+++ b/drivers/pcmcia/pxa2xx_base.c
@@ -300,25 +300,29 @@
 	return soc_common_drv_pcmcia_remove(&dev->dev);
 }
 
-static int pxa2xx_drv_pcmcia_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_drv_pcmcia_suspend(struct device *dev)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(dev);
 }
 
-static int pxa2xx_drv_pcmcia_resume(struct platform_device *dev)
+static int pxa2xx_drv_pcmcia_resume(struct device *dev)
 {
-	pxa2xx_configure_sockets(&dev->dev);
-	return pcmcia_socket_dev_resume(&dev->dev);
+	pxa2xx_configure_sockets(dev);
+	return pcmcia_socket_dev_resume(dev);
 }
 
+static struct dev_pm_ops  pxa2xx_drv_pcmcia_pm_ops = {
+	.suspend	= pxa2xx_drv_pcmcia_suspend,
+	.resume		= pxa2xx_drv_pcmcia_resume,
+};
+
 static struct platform_driver pxa2xx_pcmcia_driver = {
 	.probe		= pxa2xx_drv_pcmcia_probe,
 	.remove		= pxa2xx_drv_pcmcia_remove,
-	.suspend 	= pxa2xx_drv_pcmcia_suspend,
-	.resume 	= pxa2xx_drv_pcmcia_resume,
 	.driver		= {
 		.name	= "pxa2xx-pcmcia",
 		.owner	= THIS_MODULE,
+		.pm	= &pxa2xx_drv_pcmcia_pm_ops,
 	},
 };
 
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
new file mode 100644
index 0000000..3a8993e
--- /dev/null
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -0,0 +1,230 @@
+/*
+ * linux/drivers/pcmcia/pxa2xx_palmtc.c
+ *
+ * Driver for Palm Tungsten|C PCMCIA
+ *
+ * Copyright (C) 2008 Alex Osborne <ato@meshy.org>
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <asm/mach-types.h>
+#include <mach/palmtc.h>
+#include "soc_common.h"
+
+static int palmtc_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER1, "PCMCIA PWR1");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER2, "PCMCIA PWR2");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+	if (ret)
+		goto err3;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_POWER3, "PCMCIA PWR3");
+	if (ret)
+		goto err3;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+	if (ret)
+		goto err4;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_RESET, "PCMCIA RST");
+	if (ret)
+		goto err4;
+	ret = gpio_direction_output(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	if (ret)
+		goto err5;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_READY, "PCMCIA RDY");
+	if (ret)
+		goto err5;
+	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_READY);
+	if (ret)
+		goto err6;
+
+	ret = gpio_request(GPIO_NR_PALMTC_PCMCIA_PWRREADY, "PCMCIA PWRRDY");
+	if (ret)
+		goto err6;
+	ret = gpio_direction_input(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+	if (ret)
+		goto err7;
+
+	skt->irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+	return 0;
+
+err7:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+err6:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+err5:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+err4:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+err3:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+err2:
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+err1:
+	return ret;
+}
+
+static void palmtc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
+{
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_PWRREADY);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_READY);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_RESET);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER3);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER2);
+	gpio_free(GPIO_NR_PALMTC_PCMCIA_POWER1);
+}
+
+static void palmtc_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
+					struct pcmcia_state *state)
+{
+	state->detect = 1; /* always inserted */
+	state->ready  = !!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_READY);
+	state->bvd1   = 1;
+	state->bvd2   = 1;
+	state->wrprot = 0;
+	state->vs_3v  = 1;
+	state->vs_Xv  = 0;
+}
+
+static int palmtc_wifi_powerdown(void)
+{
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 0);
+	mdelay(40);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 0);
+	return 0;
+}
+
+static int palmtc_wifi_powerup(void)
+{
+	int timeout = 50;
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 1);
+	mdelay(50);
+
+	/* Power up the card, 1.8V first, after a while 3.3V */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER1, 1);
+	mdelay(100);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER2, 1);
+
+	/* Wait till the card is ready */
+	while (!gpio_get_value(GPIO_NR_PALMTC_PCMCIA_PWRREADY) &&
+		timeout) {
+		mdelay(1);
+		timeout--;
+	}
+
+	/* Power down the WiFi in case of error */
+	if (!timeout) {
+		palmtc_wifi_powerdown();
+		return 1;
+	}
+
+	/* Reset the card */
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 1);
+	mdelay(20);
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_RESET, 0);
+	mdelay(25);
+
+	gpio_set_value(GPIO_NR_PALMTC_PCMCIA_POWER3, 0);
+
+	return 0;
+}
+
+static int palmtc_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
+					const socket_state_t *state)
+{
+	int ret = 1;
+
+	if (state->Vcc == 0)
+		ret = palmtc_wifi_powerdown();
+	else if (state->Vcc == 33)
+		ret = palmtc_wifi_powerup();
+
+	return ret;
+}
+
+static void palmtc_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
+{
+}
+
+static void palmtc_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
+{
+}
+
+static struct pcmcia_low_level palmtc_pcmcia_ops = {
+	.owner			= THIS_MODULE,
+
+	.first			= 0,
+	.nr			= 1,
+
+	.hw_init		= palmtc_pcmcia_hw_init,
+	.hw_shutdown		= palmtc_pcmcia_hw_shutdown,
+
+	.socket_state		= palmtc_pcmcia_socket_state,
+	.configure_socket	= palmtc_pcmcia_configure_socket,
+
+	.socket_init		= palmtc_pcmcia_socket_init,
+	.socket_suspend		= palmtc_pcmcia_socket_suspend,
+};
+
+static struct platform_device *palmtc_pcmcia_device;
+
+static int __init palmtc_pcmcia_init(void)
+{
+	int ret;
+
+	if (!machine_is_palmtc())
+		return -ENODEV;
+
+	palmtc_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
+	if (!palmtc_pcmcia_device)
+		return -ENOMEM;
+
+	ret = platform_device_add_data(palmtc_pcmcia_device, &palmtc_pcmcia_ops,
+					sizeof(palmtc_pcmcia_ops));
+
+	if (!ret)
+		ret = platform_device_add(palmtc_pcmcia_device);
+
+	if (ret)
+		platform_device_put(palmtc_pcmcia_device);
+
+	return ret;
+}
+
+static void __exit palmtc_pcmcia_exit(void)
+{
+	platform_device_unregister(palmtc_pcmcia_device);
+}
+
+module_init(palmtc_pcmcia_init);
+module_exit(palmtc_pcmcia_exit);
+
+MODULE_AUTHOR("Alex Osborne <ato@meshy.org>,"
+	    " Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PCMCIA support for Palm Tungsten|C");
+MODULE_ALIAS("platform:pxa2xx-pcmcia");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pcmcia/sa1100_assabet.c b/drivers/pcmcia/sa1100_assabet.c
index f424146..ac8aa09 100644
--- a/drivers/pcmcia/sa1100_assabet.c
+++ b/drivers/pcmcia/sa1100_assabet.c
@@ -130,7 +130,7 @@
 	.socket_suspend		= assabet_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_assabet_init(struct device *dev)
+int pcmcia_assabet_init(struct device *dev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1100_generic.c b/drivers/pcmcia/sa1100_generic.c
index d8da5ac..2d0e997 100644
--- a/drivers/pcmcia/sa1100_generic.c
+++ b/drivers/pcmcia/sa1100_generic.c
@@ -89,7 +89,7 @@
 static int sa11x0_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int sa11x0_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/sa1100_neponset.c b/drivers/pcmcia/sa1100_neponset.c
index 4c41e86..0c76d33 100644
--- a/drivers/pcmcia/sa1100_neponset.c
+++ b/drivers/pcmcia/sa1100_neponset.c
@@ -123,7 +123,7 @@
 	.socket_suspend 	= sa1111_pcmcia_socket_suspend,
 };
 
-int __init pcmcia_neponset_init(struct sa1111_dev *sadev)
+int pcmcia_neponset_init(struct sa1111_dev *sadev)
 {
 	int ret = -ENODEV;
 
diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c
index 401052a2..4be4e17 100644
--- a/drivers/pcmcia/sa1111_generic.c
+++ b/drivers/pcmcia/sa1111_generic.c
@@ -159,7 +159,7 @@
 
 static int pcmcia_suspend(struct sa1111_dev *dev, pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int pcmcia_resume(struct sa1111_dev *dev)
diff --git a/drivers/pcmcia/tcic.c b/drivers/pcmcia/tcic.c
index 8eb0423..582413f 100644
--- a/drivers/pcmcia/tcic.c
+++ b/drivers/pcmcia/tcic.c
@@ -366,7 +366,7 @@
 static int tcic_drv_pcmcia_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int tcic_drv_pcmcia_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/vrc4171_card.c b/drivers/pcmcia/vrc4171_card.c
index d4ad50d..c9fcbdc 100644
--- a/drivers/pcmcia/vrc4171_card.c
+++ b/drivers/pcmcia/vrc4171_card.c
@@ -707,7 +707,7 @@
 static int vrc4171_card_suspend(struct platform_device *dev,
 				     pm_message_t state)
 {
-	return pcmcia_socket_dev_suspend(&dev->dev, state);
+	return pcmcia_socket_dev_suspend(&dev->dev);
 }
 
 static int vrc4171_card_resume(struct platform_device *dev)
diff --git a/drivers/pcmcia/yenta_socket.c b/drivers/pcmcia/yenta_socket.c
index b459e87..abe0e44 100644
--- a/drivers/pcmcia/yenta_socket.c
+++ b/drivers/pcmcia/yenta_socket.c
@@ -1225,60 +1225,71 @@
 }
 
 #ifdef CONFIG_PM
-static int yenta_dev_suspend (struct pci_dev *dev, pm_message_t state)
+static int yenta_dev_suspend_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
 	int ret;
 
-	ret = pcmcia_socket_dev_suspend(&dev->dev, state);
+	ret = pcmcia_socket_dev_suspend(dev);
 
-	if (socket) {
-		if (socket->type && socket->type->save_state)
-			socket->type->save_state(socket);
+	if (!socket)
+		return ret;
 
-		/* FIXME: pci_save_state needs to have a better interface */
-		pci_save_state(dev);
-		pci_read_config_dword(dev, 16*4, &socket->saved_state[0]);
-		pci_read_config_dword(dev, 17*4, &socket->saved_state[1]);
-		pci_disable_device(dev);
+	if (socket->type && socket->type->save_state)
+		socket->type->save_state(socket);
 
-		/*
-		 * Some laptops (IBM T22) do not like us putting the Cardbus
-		 * bridge into D3.  At a guess, some other laptop will
-		 * probably require this, so leave it commented out for now.
-		 */
-		/* pci_set_power_state(dev, 3); */
-	}
+	pci_save_state(pdev);
+	pci_read_config_dword(pdev, 16*4, &socket->saved_state[0]);
+	pci_read_config_dword(pdev, 17*4, &socket->saved_state[1]);
+	pci_disable_device(pdev);
+
+	/*
+	 * Some laptops (IBM T22) do not like us putting the Cardbus
+	 * bridge into D3.  At a guess, some other laptop will
+	 * probably require this, so leave it commented out for now.
+	 */
+	/* pci_set_power_state(dev, 3); */
 
 	return ret;
 }
 
-
-static int yenta_dev_resume (struct pci_dev *dev)
+static int yenta_dev_resume_noirq(struct device *dev)
 {
-	struct yenta_socket *socket = pci_get_drvdata(dev);
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct yenta_socket *socket = pci_get_drvdata(pdev);
+	int ret;
 
-	if (socket) {
-		int rc;
+	if (!socket)
+		return 0;
 
-		pci_set_power_state(dev, 0);
-		/* FIXME: pci_restore_state needs to have a better interface */
-		pci_restore_state(dev);
-		pci_write_config_dword(dev, 16*4, socket->saved_state[0]);
-		pci_write_config_dword(dev, 17*4, socket->saved_state[1]);
+	pci_write_config_dword(pdev, 16*4, socket->saved_state[0]);
+	pci_write_config_dword(pdev, 17*4, socket->saved_state[1]);
 
-		rc = pci_enable_device(dev);
-		if (rc)
-			return rc;
+	ret = pci_enable_device(pdev);
+	if (ret)
+		return ret;
 
-		pci_set_master(dev);
+	pci_set_master(pdev);
 
-		if (socket->type && socket->type->restore_state)
-			socket->type->restore_state(socket);
-	}
+	if (socket->type && socket->type->restore_state)
+		socket->type->restore_state(socket);
 
-	return pcmcia_socket_dev_resume(&dev->dev);
+	return pcmcia_socket_dev_resume(dev);
 }
+
+static struct dev_pm_ops yenta_pm_ops = {
+	.suspend_noirq = yenta_dev_suspend_noirq,
+	.resume_noirq = yenta_dev_resume_noirq,
+	.freeze_noirq = yenta_dev_suspend_noirq,
+	.thaw_noirq = yenta_dev_resume_noirq,
+	.poweroff_noirq = yenta_dev_suspend_noirq,
+	.restore_noirq = yenta_dev_resume_noirq,
+};
+
+#define YENTA_PM_OPS	(&yenta_pm_ops)
+#else
+#define YENTA_PM_OPS	NULL
 #endif
 
 #define CB_ID(vend,dev,type)				\
@@ -1376,10 +1387,7 @@
 	.id_table	= yenta_table,
 	.probe		= yenta_probe,
 	.remove		= __devexit_p(yenta_close),
-#ifdef CONFIG_PM
-	.suspend	= yenta_dev_suspend,
-	.resume		= yenta_dev_resume,
-#endif
+	.driver.pm	= YENTA_PM_OPS,
 };
 
 
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index da3c08b..749e210 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -624,7 +624,7 @@
 	struct backlight_device *bd = eeepc_backlight_device;
 	if (bd) {
 		int old = bd->props.brightness;
-		bd->props.brightness = read_brightness(bd);
+		backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
 		return old;
 	}
 	return -1;
diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c
index afdbdaa..a2a742c 100644
--- a/drivers/platform/x86/sony-laptop.c
+++ b/drivers/platform/x86/sony-laptop.c
@@ -1211,15 +1211,6 @@
 		}
 	}
 
-	/* try to _INI the device if such method exists (ACPI spec 3.0-6.5.1
-	 * should be respected as we already checked for the device presence above */
-	if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, METHOD_NAME__INI, &handle))) {
-		dprintk("Invoking _INI\n");
-		if (ACPI_FAILURE(acpi_evaluate_object(sony_nc_acpi_handle, METHOD_NAME__INI,
-						NULL, NULL)))
-			dprintk("_INI Method failed\n");
-	}
-
 	if (ACPI_SUCCESS(acpi_get_handle(sony_nc_acpi_handle, "ECON",
 					 &handle))) {
 		if (acpi_callsetfunc(sony_nc_acpi_handle, "ECON", 1, NULL))
@@ -1399,27 +1390,20 @@
 	struct sonypi_event	*events;
 };
 
-struct device_ctrl {
-	int				model;
-	int				(*handle_irq)(const u8, const u8);
-	u16				evport_offset;
-	u8				has_camera;
-	u8				has_bluetooth;
-	u8				has_wwan;
-	struct sonypi_eventtypes	*event_types;
-};
-
 struct sony_pic_dev {
-	struct device_ctrl	*control;
-	struct acpi_device	*acpi_dev;
-	struct sony_pic_irq	*cur_irq;
-	struct sony_pic_ioport	*cur_ioport;
-	struct list_head	interrupts;
-	struct list_head	ioports;
-	struct mutex		lock;
-	u8			camera_power;
-	u8			bluetooth_power;
-	u8			wwan_power;
+	struct acpi_device		*acpi_dev;
+	struct sony_pic_irq		*cur_irq;
+	struct sony_pic_ioport		*cur_ioport;
+	struct list_head		interrupts;
+	struct list_head		ioports;
+	struct mutex			lock;
+	struct sonypi_eventtypes	*event_types;
+	int                             (*handle_irq)(const u8, const u8);
+	int				model;
+	u16				evport_offset;
+	u8				camera_power;
+	u8				bluetooth_power;
+	u8				wwan_power;
 };
 
 static struct sony_pic_dev spic_dev = {
@@ -1427,6 +1411,8 @@
 	.ioports	= LIST_HEAD_INIT(spic_dev.ioports),
 };
 
+static int spic_drv_registered;
+
 /* Event masks */
 #define SONYPI_JOGGER_MASK			0x00000001
 #define SONYPI_CAPTURE_MASK			0x00000002
@@ -1724,27 +1710,6 @@
 	return 1;
 }
 
-static struct device_ctrl spic_types[] = {
-	{
-		.model = SONYPI_DEVICE_TYPE1,
-		.handle_irq = NULL,
-		.evport_offset = SONYPI_TYPE1_OFFSET,
-		.event_types = type1_events,
-	},
-	{
-		.model = SONYPI_DEVICE_TYPE2,
-		.handle_irq = NULL,
-		.evport_offset = SONYPI_TYPE2_OFFSET,
-		.event_types = type2_events,
-	},
-	{
-		.model = SONYPI_DEVICE_TYPE3,
-		.handle_irq = type3_handle_irq,
-		.evport_offset = SONYPI_TYPE3_OFFSET,
-		.event_types = type3_events,
-	},
-};
-
 static void sony_pic_detect_device_type(struct sony_pic_dev *dev)
 {
 	struct pci_dev *pcidev;
@@ -1752,48 +1717,63 @@
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_82371AB_3, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[0];
+		dev->model = SONYPI_DEVICE_TYPE1;
+		dev->evport_offset = SONYPI_TYPE1_OFFSET;
+		dev->event_types = type1_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH6_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE2;
+		dev->evport_offset = SONYPI_TYPE2_OFFSET;
+		dev->event_types = type2_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH7_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH8_4, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
 			PCI_DEVICE_ID_INTEL_ICH9_1, NULL);
 	if (pcidev) {
-		dev->control = &spic_types[2];
+		dev->model = SONYPI_DEVICE_TYPE3;
+		dev->handle_irq = type3_handle_irq;
+		dev->evport_offset = SONYPI_TYPE3_OFFSET;
+		dev->event_types = type3_events;
 		goto out;
 	}
 
 	/* default */
-	dev->control = &spic_types[1];
+	dev->model = SONYPI_DEVICE_TYPE2;
+	dev->evport_offset = SONYPI_TYPE2_OFFSET;
+	dev->event_types = type2_events;
 
 out:
 	if (pcidev)
 		pci_dev_put(pcidev);
 
 	printk(KERN_INFO DRV_PFX "detected Type%d model\n",
-			dev->control->model == SONYPI_DEVICE_TYPE1 ? 1 :
-			dev->control->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
+			dev->model == SONYPI_DEVICE_TYPE1 ? 1 :
+			dev->model == SONYPI_DEVICE_TYPE2 ? 2 : 3);
 }
 
 /* camera tests and poweron/poweroff */
@@ -2566,7 +2546,7 @@
 	buffer.pointer = resource;
 
 	/* setup Type 1 resources */
-	if (spic_dev.control->model == SONYPI_DEVICE_TYPE1) {
+	if (spic_dev.model == SONYPI_DEVICE_TYPE1) {
 
 		/* setup io resources */
 		resource->res1.type = ACPI_RESOURCE_TYPE_IO;
@@ -2649,29 +2629,28 @@
 		data_mask = inb_p(dev->cur_ioport->io2.minimum);
 	else
 		data_mask = inb_p(dev->cur_ioport->io1.minimum +
-				dev->control->evport_offset);
+				dev->evport_offset);
 
 	dprintk("event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
 			ev, data_mask, dev->cur_ioport->io1.minimum,
-			dev->control->evport_offset);
+			dev->evport_offset);
 
 	if (ev == 0x00 || ev == 0xff)
 		return IRQ_HANDLED;
 
-	for (i = 0; dev->control->event_types[i].mask; i++) {
+	for (i = 0; dev->event_types[i].mask; i++) {
 
-		if ((data_mask & dev->control->event_types[i].data) !=
-		    dev->control->event_types[i].data)
+		if ((data_mask & dev->event_types[i].data) !=
+		    dev->event_types[i].data)
 			continue;
 
-		if (!(mask & dev->control->event_types[i].mask))
+		if (!(mask & dev->event_types[i].mask))
 			continue;
 
-		for (j = 0; dev->control->event_types[i].events[j].event; j++) {
-			if (ev == dev->control->event_types[i].events[j].data) {
+		for (j = 0; dev->event_types[i].events[j].event; j++) {
+			if (ev == dev->event_types[i].events[j].data) {
 				device_event =
-					dev->control->
-						event_types[i].events[j].event;
+					dev->event_types[i].events[j].event;
 				goto found;
 			}
 		}
@@ -2679,13 +2658,12 @@
 	/* Still not able to decode the event try to pass
 	 * it over to the minidriver
 	 */
-	if (dev->control->handle_irq &&
-			dev->control->handle_irq(data_mask, ev) == 0)
+	if (dev->handle_irq && dev->handle_irq(data_mask, ev) == 0)
 		return IRQ_HANDLED;
 
 	dprintk("unknown event ([%.2x] [%.2x]) at port 0x%.4x(+0x%.2x)\n",
 			ev, data_mask, dev->cur_ioport->io1.minimum,
-			dev->control->evport_offset);
+			dev->evport_offset);
 	return IRQ_HANDLED;
 
 found:
@@ -2816,7 +2794,7 @@
 	/* request IRQ */
 	list_for_each_entry_reverse(irq, &spic_dev.interrupts, list) {
 		if (!request_irq(irq->irq.interrupts[0], sony_pic_irq,
-					IRQF_SHARED, "sony-laptop", &spic_dev)) {
+					IRQF_DISABLED, "sony-laptop", &spic_dev)) {
 			dprintk("IRQ: %d - triggering: %d - "
 					"polarity: %d - shr: %d\n",
 					irq->irq.interrupts[0],
@@ -2949,6 +2927,7 @@
 					"Unable to register SPIC driver.");
 			goto out;
 		}
+		spic_drv_registered = 1;
 	}
 
 	result = acpi_bus_register_driver(&sony_nc_driver);
@@ -2960,7 +2939,7 @@
 	return 0;
 
 out_unregister_pic:
-	if (!no_spic)
+	if (spic_drv_registered)
 		acpi_bus_unregister_driver(&sony_pic_driver);
 out:
 	return result;
@@ -2969,7 +2948,7 @@
 static void __exit sony_laptop_exit(void)
 {
 	acpi_bus_unregister_driver(&sony_nc_driver);
-	if (!no_spic)
+	if (spic_drv_registered)
 		acpi_bus_unregister_driver(&sony_pic_driver);
 }
 
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index f78d275..d93108d 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -22,7 +22,7 @@
  */
 
 #define TPACPI_VERSION "0.23"
-#define TPACPI_SYSFS_VERSION 0x020400
+#define TPACPI_SYSFS_VERSION 0x020500
 
 /*
  *  Changelog:
@@ -145,6 +145,51 @@
 	TP_ACPI_WGSV_STATE_UWBPWR	= 0x0020, /* UWB radio enabled */
 };
 
+/* HKEY events */
+enum tpacpi_hkey_event_t {
+	/* Hotkey-related */
+	TP_HKEY_EV_HOTKEY_BASE		= 0x1001, /* first hotkey (FN+F1) */
+	TP_HKEY_EV_BRGHT_UP		= 0x1010, /* Brightness up */
+	TP_HKEY_EV_BRGHT_DOWN		= 0x1011, /* Brightness down */
+	TP_HKEY_EV_VOL_UP		= 0x1015, /* Volume up or unmute */
+	TP_HKEY_EV_VOL_DOWN		= 0x1016, /* Volume down or unmute */
+	TP_HKEY_EV_VOL_MUTE		= 0x1017, /* Mixer output mute */
+
+	/* Reasons for waking up from S3/S4 */
+	TP_HKEY_EV_WKUP_S3_UNDOCK	= 0x2304, /* undock requested, S3 */
+	TP_HKEY_EV_WKUP_S4_UNDOCK	= 0x2404, /* undock requested, S4 */
+	TP_HKEY_EV_WKUP_S3_BAYEJ	= 0x2305, /* bay ejection req, S3 */
+	TP_HKEY_EV_WKUP_S4_BAYEJ	= 0x2405, /* bay ejection req, S4 */
+	TP_HKEY_EV_WKUP_S3_BATLOW	= 0x2313, /* battery empty, S3 */
+	TP_HKEY_EV_WKUP_S4_BATLOW	= 0x2413, /* battery empty, S4 */
+
+	/* Auto-sleep after eject request */
+	TP_HKEY_EV_BAYEJ_ACK		= 0x3003, /* bay ejection complete */
+	TP_HKEY_EV_UNDOCK_ACK		= 0x4003, /* undock complete */
+
+	/* Misc bay events */
+	TP_HKEY_EV_OPTDRV_EJ		= 0x3006, /* opt. drive tray ejected */
+
+	/* User-interface events */
+	TP_HKEY_EV_LID_CLOSE		= 0x5001, /* laptop lid closed */
+	TP_HKEY_EV_LID_OPEN		= 0x5002, /* laptop lid opened */
+	TP_HKEY_EV_TABLET_TABLET	= 0x5009, /* tablet swivel up */
+	TP_HKEY_EV_TABLET_NOTEBOOK	= 0x500a, /* tablet swivel down */
+	TP_HKEY_EV_PEN_INSERTED		= 0x500b, /* tablet pen inserted */
+	TP_HKEY_EV_PEN_REMOVED		= 0x500c, /* tablet pen removed */
+	TP_HKEY_EV_BRGHT_CHANGED	= 0x5010, /* backlight control event */
+
+	/* Thermal events */
+	TP_HKEY_EV_ALARM_BAT_HOT	= 0x6011, /* battery too hot */
+	TP_HKEY_EV_ALARM_BAT_XHOT	= 0x6012, /* battery critically hot */
+	TP_HKEY_EV_ALARM_SENSOR_HOT	= 0x6021, /* sensor too hot */
+	TP_HKEY_EV_ALARM_SENSOR_XHOT	= 0x6022, /* sensor critically hot */
+	TP_HKEY_EV_THM_TABLE_CHANGED	= 0x6030, /* thermal table changed */
+
+	/* Misc */
+	TP_HKEY_EV_RFKILL_CHANGED	= 0x7000, /* rfkill switch changed */
+};
+
 /****************************************************************************
  * Main driver
  */
@@ -1848,6 +1893,27 @@
  * Hotkey subdriver
  */
 
+/*
+ * ThinkPad firmware event model
+ *
+ * The ThinkPad firmware has two main event interfaces: normal ACPI
+ * notifications (which follow the ACPI standard), and a private event
+ * interface.
+ *
+ * The private event interface also issues events for the hotkeys.  As
+ * the driver gained features, the event handling code ended up being
+ * built around the hotkey subdriver.  This will need to be refactored
+ * to a more formal event API eventually.
+ *
+ * Some "hotkeys" are actually supposed to be used as event reports,
+ * such as "brightness has changed", "volume has changed", depending on
+ * the ThinkPad model and how the firmware is operating.
+ *
+ * Unlike other classes, hotkey-class events have mask/unmask control on
+ * non-ancient firmware.  However, how it behaves changes a lot with the
+ * firmware model and version.
+ */
+
 enum {	/* hot key scan codes (derived from ACPI DSDT) */
 	TP_ACPI_HOTKEYSCAN_FNF1		= 0,
 	TP_ACPI_HOTKEYSCAN_FNF2,
@@ -1875,7 +1941,7 @@
 	TP_ACPI_HOTKEYSCAN_THINKPAD,
 };
 
-enum {	/* Keys available through NVRAM polling */
+enum {	/* Keys/events available through NVRAM polling */
 	TPACPI_HKEY_NVRAM_KNOWN_MASK = 0x00fb88c0U,
 	TPACPI_HKEY_NVRAM_GOOD_MASK  = 0x00fb8000U,
 };
@@ -1930,8 +1996,11 @@
 static struct mutex hotkey_thread_mutex;
 
 /*
- * Acquire mutex to write poller control variables.
- * Increment hotkey_config_change when changing them.
+ * Acquire mutex to write poller control variables as an
+ * atomic block.
+ *
+ * Increment hotkey_config_change when changing them if you
+ * want the kthread to forget old state.
  *
  * See HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
  */
@@ -1942,6 +2011,11 @@
  * hotkey poller control variables
  *
  * Must be atomic or readers will also need to acquire mutex
+ *
+ * HOTKEY_CONFIG_CRITICAL_START/HOTKEY_CONFIG_CRITICAL_END
+ * should be used only when the changes need to be taken as
+ * a block, OR when one needs to force the kthread to forget
+ * old state.
  */
 static u32 hotkey_source_mask;		/* bit mask 0=ACPI,1=NVRAM */
 static unsigned int hotkey_poll_freq = 10; /* Hz */
@@ -1972,10 +2046,12 @@
 
 static int hotkey_autosleep_ack;
 
-static u32 hotkey_orig_mask;
-static u32 hotkey_all_mask;
-static u32 hotkey_reserved_mask;
-static u32 hotkey_mask;
+static u32 hotkey_orig_mask;		/* events the BIOS had enabled */
+static u32 hotkey_all_mask;		/* all events supported in fw */
+static u32 hotkey_reserved_mask;	/* events better left disabled */
+static u32 hotkey_driver_mask;		/* events needed by the driver */
+static u32 hotkey_user_mask;		/* events visible to userspace */
+static u32 hotkey_acpi_mask;		/* events enabled in firmware */
 
 static unsigned int hotkey_report_mode;
 
@@ -1983,6 +2059,9 @@
 
 static struct attribute_set *hotkey_dev_attributes;
 
+static void tpacpi_driver_event(const unsigned int hkey_event);
+static void hotkey_driver_event(const unsigned int scancode);
+
 /* HKEY.MHKG() return bits */
 #define TP_HOTKEY_TABLET_MASK (1 << 3)
 
@@ -2017,24 +2096,53 @@
 }
 
 /*
+ * Reads current event mask from firmware, and updates
+ * hotkey_acpi_mask accordingly.  Also resets any bits
+ * from hotkey_user_mask that are unavailable to be
+ * delivered (shadow requirement of the userspace ABI).
+ *
  * Call with hotkey_mutex held
  */
 static int hotkey_mask_get(void)
 {
-	u32 m = 0;
-
 	if (tp_features.hotkey_mask) {
+		u32 m = 0;
+
 		if (!acpi_evalf(hkey_handle, &m, "DHKN", "d"))
 			return -EIO;
+
+		hotkey_acpi_mask = m;
+	} else {
+		/* no mask support doesn't mean no event support... */
+		hotkey_acpi_mask = hotkey_all_mask;
 	}
-	HOTKEY_CONFIG_CRITICAL_START
-	hotkey_mask = m | (hotkey_source_mask & hotkey_mask);
-	HOTKEY_CONFIG_CRITICAL_END
+
+	/* sync userspace-visible mask */
+	hotkey_user_mask &= (hotkey_acpi_mask | hotkey_source_mask);
 
 	return 0;
 }
 
+void static hotkey_mask_warn_incomplete_mask(void)
+{
+	/* log only what the user can fix... */
+	const u32 wantedmask = hotkey_driver_mask &
+		~(hotkey_acpi_mask | hotkey_source_mask) &
+		(hotkey_all_mask | TPACPI_HKEY_NVRAM_KNOWN_MASK);
+
+	if (wantedmask)
+		printk(TPACPI_NOTICE
+			"required events 0x%08x not enabled!\n",
+			wantedmask);
+}
+
 /*
+ * Set the firmware mask when supported
+ *
+ * Also calls hotkey_mask_get to update hotkey_acpi_mask.
+ *
+ * NOTE: does not set bits in hotkey_user_mask, but may reset them.
+ *
  * Call with hotkey_mutex held
  */
 static int hotkey_mask_set(u32 mask)
@@ -2042,66 +2150,100 @@
 	int i;
 	int rc = 0;
 
-	if (tp_features.hotkey_mask) {
-		if (!tp_warned.hotkey_mask_ff &&
-		    (mask == 0xffff || mask == 0xffffff ||
-		     mask == 0xffffffff)) {
-			tp_warned.hotkey_mask_ff = 1;
-			printk(TPACPI_NOTICE
-			       "setting the hotkey mask to 0x%08x is likely "
-			       "not the best way to go about it\n", mask);
-			printk(TPACPI_NOTICE
-			       "please consider using the driver defaults, "
-			       "and refer to up-to-date thinkpad-acpi "
-			       "documentation\n");
-		}
+	const u32 fwmask = mask & ~hotkey_source_mask;
 
-		HOTKEY_CONFIG_CRITICAL_START
+	if (tp_features.hotkey_mask) {
 		for (i = 0; i < 32; i++) {
-			u32 m = 1 << i;
-			/* enable in firmware mask only keys not in NVRAM
-			 * mode, but enable the key in the cached hotkey_mask
-			 * regardless of mode, or the key will end up
-			 * disabled by hotkey_mask_get() */
 			if (!acpi_evalf(hkey_handle,
 					NULL, "MHKM", "vdd", i + 1,
-					!!((mask & ~hotkey_source_mask) & m))) {
+					!!(mask & (1 << i)))) {
 				rc = -EIO;
 				break;
-			} else {
-				hotkey_mask = (hotkey_mask & ~m) | (mask & m);
 			}
 		}
-		HOTKEY_CONFIG_CRITICAL_END
-
-		/* hotkey_mask_get must be called unconditionally below */
-		if (!hotkey_mask_get() && !rc &&
-		    (hotkey_mask & ~hotkey_source_mask) !=
-		     (mask & ~hotkey_source_mask)) {
-			printk(TPACPI_NOTICE
-			       "requested hot key mask 0x%08x, but "
-			       "firmware forced it to 0x%08x\n",
-			       mask, hotkey_mask);
-		}
-	} else {
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-		HOTKEY_CONFIG_CRITICAL_START
-		hotkey_mask = mask & hotkey_source_mask;
-		HOTKEY_CONFIG_CRITICAL_END
-		hotkey_mask_get();
-		if (hotkey_mask != mask) {
-			printk(TPACPI_NOTICE
-			       "requested hot key mask 0x%08x, "
-			       "forced to 0x%08x (NVRAM poll mask is "
-			       "0x%08x): no firmware mask support\n",
-			       mask, hotkey_mask, hotkey_source_mask);
-		}
-#else
-		hotkey_mask_get();
-		rc = -ENXIO;
-#endif /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
 	}
 
+	/*
+	 * We *must* make an inconditional call to hotkey_mask_get to
+	 * refresh hotkey_acpi_mask and update hotkey_user_mask
+	 *
+	 * Take the opportunity to also log when we cannot _enable_
+	 * a given event.
+	 */
+	if (!hotkey_mask_get() && !rc && (fwmask & ~hotkey_acpi_mask)) {
+		printk(TPACPI_NOTICE
+		       "asked for hotkey mask 0x%08x, but "
+		       "firmware forced it to 0x%08x\n",
+		       fwmask, hotkey_acpi_mask);
+	}
+
+	hotkey_mask_warn_incomplete_mask();
+
+	return rc;
+}
+
+/*
+ * Sets hotkey_user_mask and tries to set the firmware mask
+ *
+ * Call with hotkey_mutex held
+ */
+static int hotkey_user_mask_set(const u32 mask)
+{
+	int rc;
+
+	/* Give people a chance to notice they are doing something that
+	 * is bound to go boom on their users sooner or later */
+	if (!tp_warned.hotkey_mask_ff &&
+	    (mask == 0xffff || mask == 0xffffff ||
+	     mask == 0xffffffff)) {
+		tp_warned.hotkey_mask_ff = 1;
+		printk(TPACPI_NOTICE
+		       "setting the hotkey mask to 0x%08x is likely "
+		       "not the best way to go about it\n", mask);
+		printk(TPACPI_NOTICE
+		       "please consider using the driver defaults, "
+		       "and refer to up-to-date thinkpad-acpi "
+		       "documentation\n");
+	}
+
+	/* Try to enable what the user asked for, plus whatever we need.
+	 * this syncs everything but won't enable bits in hotkey_user_mask */
+	rc = hotkey_mask_set((mask | hotkey_driver_mask) & ~hotkey_source_mask);
+
+	/* Enable the available bits in hotkey_user_mask */
+	hotkey_user_mask = mask & (hotkey_acpi_mask | hotkey_source_mask);
+
+	return rc;
+}
+
+/*
+ * Sets the driver hotkey mask.
+ *
+ * Can be called even if the hotkey subdriver is inactive
+ */
+static int tpacpi_hotkey_driver_mask_set(const u32 mask)
+{
+	int rc;
+
+	/* Do the right thing if hotkey_init has not been called yet */
+	if (!tp_features.hotkey) {
+		hotkey_driver_mask = mask;
+		return 0;
+	}
+
+	mutex_lock(&hotkey_mutex);
+
+	HOTKEY_CONFIG_CRITICAL_START
+	hotkey_driver_mask = mask;
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+	hotkey_source_mask |= (mask & ~hotkey_all_mask);
+#endif
+	HOTKEY_CONFIG_CRITICAL_END
+
+	rc = hotkey_mask_set((hotkey_acpi_mask | hotkey_driver_mask) &
+							~hotkey_source_mask);
+	mutex_unlock(&hotkey_mutex);
+
 	return rc;
 }
 
@@ -2137,11 +2279,10 @@
 	}
 }
 
-static void tpacpi_input_send_key(unsigned int scancode)
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key(const unsigned int scancode)
 {
-	unsigned int keycode;
-
-	keycode = hotkey_keycode_map[scancode];
+	const unsigned int keycode = hotkey_keycode_map[scancode];
 
 	if (keycode != KEY_RESERVED) {
 		mutex_lock(&tpacpi_inputdev_send_mutex);
@@ -2162,19 +2303,28 @@
 	}
 }
 
+/* Do NOT call without validating scancode first */
+static void tpacpi_input_send_key_masked(const unsigned int scancode)
+{
+	hotkey_driver_event(scancode);
+	if (hotkey_user_mask & (1 << scancode))
+		tpacpi_input_send_key(scancode);
+}
+
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 static struct tp_acpi_drv_struct ibm_hotkey_acpidriver;
 
+/* Do NOT call without validating scancode first */
 static void tpacpi_hotkey_send_key(unsigned int scancode)
 {
-	tpacpi_input_send_key(scancode);
+	tpacpi_input_send_key_masked(scancode);
 	if (hotkey_report_mode < 2) {
 		acpi_bus_generate_proc_event(ibm_hotkey_acpidriver.device,
-						0x80, 0x1001 + scancode);
+				0x80, TP_HKEY_EV_HOTKEY_BASE + scancode);
 	}
 }
 
-static void hotkey_read_nvram(struct tp_nvram_state *n, u32 m)
+static void hotkey_read_nvram(struct tp_nvram_state *n, const u32 m)
 {
 	u8 d;
 
@@ -2210,21 +2360,24 @@
 	}
 }
 
+static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
+					   struct tp_nvram_state *newn,
+					   const u32 event_mask)
+{
+
 #define TPACPI_COMPARE_KEY(__scancode, __member) \
 	do { \
-		if ((mask & (1 << __scancode)) && \
+		if ((event_mask & (1 << __scancode)) && \
 		    oldn->__member != newn->__member) \
-		tpacpi_hotkey_send_key(__scancode); \
+			tpacpi_hotkey_send_key(__scancode); \
 	} while (0)
 
 #define TPACPI_MAY_SEND_KEY(__scancode) \
-	do { if (mask & (1 << __scancode)) \
-		tpacpi_hotkey_send_key(__scancode); } while (0)
+	do { \
+		if (event_mask & (1 << __scancode)) \
+			tpacpi_hotkey_send_key(__scancode); \
+	} while (0)
 
-static void hotkey_compare_and_issue_event(struct tp_nvram_state *oldn,
-					   struct tp_nvram_state *newn,
-					   u32 mask)
-{
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_THINKPAD, thinkpad_toggle);
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNSPACE, zoom_toggle);
 	TPACPI_COMPARE_KEY(TP_ACPI_HOTKEYSCAN_FNF7, display_toggle);
@@ -2270,15 +2423,22 @@
 			}
 		}
 	}
-}
 
 #undef TPACPI_COMPARE_KEY
 #undef TPACPI_MAY_SEND_KEY
+}
 
+/*
+ * Polling driver
+ *
+ * We track all events in hotkey_source_mask all the time, since
+ * most of them are edge-based.  We only issue those requested by
+ * hotkey_user_mask or hotkey_driver_mask, though.
+ */
 static int hotkey_kthread(void *data)
 {
 	struct tp_nvram_state s[2];
-	u32 mask;
+	u32 poll_mask, event_mask;
 	unsigned int si, so;
 	unsigned long t;
 	unsigned int change_detector, must_reset;
@@ -2298,10 +2458,12 @@
 	/* Initial state for compares */
 	mutex_lock(&hotkey_thread_data_mutex);
 	change_detector = hotkey_config_change;
-	mask = hotkey_source_mask & hotkey_mask;
+	poll_mask = hotkey_source_mask;
+	event_mask = hotkey_source_mask &
+			(hotkey_driver_mask | hotkey_user_mask);
 	poll_freq = hotkey_poll_freq;
 	mutex_unlock(&hotkey_thread_data_mutex);
-	hotkey_read_nvram(&s[so], mask);
+	hotkey_read_nvram(&s[so], poll_mask);
 
 	while (!kthread_should_stop()) {
 		if (t == 0) {
@@ -2324,15 +2486,17 @@
 			t = 0;
 			change_detector = hotkey_config_change;
 		}
-		mask = hotkey_source_mask & hotkey_mask;
+		poll_mask = hotkey_source_mask;
+		event_mask = hotkey_source_mask &
+				(hotkey_driver_mask | hotkey_user_mask);
 		poll_freq = hotkey_poll_freq;
 		mutex_unlock(&hotkey_thread_data_mutex);
 
-		if (likely(mask)) {
-			hotkey_read_nvram(&s[si], mask);
+		if (likely(poll_mask)) {
+			hotkey_read_nvram(&s[si], poll_mask);
 			if (likely(si != so)) {
 				hotkey_compare_and_issue_event(&s[so], &s[si],
-								mask);
+								event_mask);
 			}
 		}
 
@@ -2364,10 +2528,12 @@
 /* call with hotkey_mutex held */
 static void hotkey_poll_setup(bool may_warn)
 {
-	u32 hotkeys_to_poll = hotkey_source_mask & hotkey_mask;
+	const u32 poll_driver_mask = hotkey_driver_mask & hotkey_source_mask;
+	const u32 poll_user_mask = hotkey_user_mask & hotkey_source_mask;
 
-	if (hotkeys_to_poll != 0 && hotkey_poll_freq > 0 &&
-	    (tpacpi_inputdev->users > 0 || hotkey_report_mode < 2)) {
+	if (hotkey_poll_freq > 0 &&
+	    (poll_driver_mask ||
+	     (poll_user_mask && tpacpi_inputdev->users > 0))) {
 		if (!tpacpi_hotkey_task) {
 			tpacpi_hotkey_task = kthread_run(hotkey_kthread,
 					NULL, TPACPI_NVRAM_KTHREAD_NAME);
@@ -2380,12 +2546,13 @@
 		}
 	} else {
 		hotkey_poll_stop_sync();
-		if (may_warn && hotkeys_to_poll != 0 &&
+		if (may_warn && (poll_driver_mask || poll_user_mask) &&
 		    hotkey_poll_freq == 0) {
 			printk(TPACPI_NOTICE
-				"hot keys 0x%08x require polling, "
-				"which is currently disabled\n",
-				hotkeys_to_poll);
+				"hot keys 0x%08x and/or events 0x%08x "
+				"require polling, which is currently "
+				"disabled\n",
+				poll_user_mask, poll_driver_mask);
 		}
 	}
 }
@@ -2403,9 +2570,7 @@
 	if (!freq)
 		hotkey_poll_stop_sync();
 
-	HOTKEY_CONFIG_CRITICAL_START
 	hotkey_poll_freq = freq;
-	HOTKEY_CONFIG_CRITICAL_END
 }
 
 #else /* CONFIG_THINKPAD_ACPI_HOTKEY_POLL */
@@ -2440,7 +2605,8 @@
 static void hotkey_inputdev_close(struct input_dev *dev)
 {
 	/* disable hotkey polling when possible */
-	if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING)
+	if (tpacpi_lifecycle == TPACPI_LIFE_RUNNING &&
+	    !(hotkey_source_mask & hotkey_driver_mask))
 		hotkey_poll_setup_safe(false);
 }
 
@@ -2488,15 +2654,7 @@
 			   struct device_attribute *attr,
 			   char *buf)
 {
-	int res;
-
-	if (mutex_lock_killable(&hotkey_mutex))
-		return -ERESTARTSYS;
-	res = hotkey_mask_get();
-	mutex_unlock(&hotkey_mutex);
-
-	return (res)?
-		res : snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_mask);
+	return snprintf(buf, PAGE_SIZE, "0x%08x\n", hotkey_user_mask);
 }
 
 static ssize_t hotkey_mask_store(struct device *dev,
@@ -2512,7 +2670,7 @@
 	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
-	res = hotkey_mask_set(t);
+	res = hotkey_user_mask_set(t);
 
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 	hotkey_poll_setup(true);
@@ -2594,6 +2752,8 @@
 			    const char *buf, size_t count)
 {
 	unsigned long t;
+	u32 r_ev;
+	int rc;
 
 	if (parse_strtoul(buf, 0xffffffffUL, &t) ||
 		((t & ~TPACPI_HKEY_NVRAM_KNOWN_MASK) != 0))
@@ -2606,14 +2766,28 @@
 	hotkey_source_mask = t;
 	HOTKEY_CONFIG_CRITICAL_END
 
+	rc = hotkey_mask_set((hotkey_user_mask | hotkey_driver_mask) &
+			~hotkey_source_mask);
 	hotkey_poll_setup(true);
-	hotkey_mask_set(hotkey_mask);
+
+	/* check if events needed by the driver got disabled */
+	r_ev = hotkey_driver_mask & ~(hotkey_acpi_mask & hotkey_all_mask)
+		& ~hotkey_source_mask & TPACPI_HKEY_NVRAM_KNOWN_MASK;
 
 	mutex_unlock(&hotkey_mutex);
 
+	if (rc < 0)
+		printk(TPACPI_ERR "hotkey_source_mask: failed to update the"
+			"firmware event mask!\n");
+
+	if (r_ev)
+		printk(TPACPI_NOTICE "hotkey_source_mask: "
+			"some important events were disabled: "
+			"0x%04x\n", r_ev);
+
 	tpacpi_disclose_usertask("hotkey_source_mask", "set to 0x%08lx\n", t);
 
-	return count;
+	return (rc < 0) ? rc : count;
 }
 
 static struct device_attribute dev_attr_hotkey_source_mask =
@@ -2731,9 +2905,8 @@
 
 static void hotkey_wakeup_reason_notify_change(void)
 {
-	if (tp_features.hotkey_mask)
-		sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
-			     "wakeup_reason");
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+		     "wakeup_reason");
 }
 
 /* sysfs wakeup hotunplug_complete (pollable) -------------------------- */
@@ -2750,9 +2923,8 @@
 
 static void hotkey_wakeup_hotunplug_complete_notify_change(void)
 {
-	if (tp_features.hotkey_mask)
-		sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
-			     "wakeup_hotunplug_complete");
+	sysfs_notify(&tpacpi_pdev->dev.kobj, NULL,
+		     "wakeup_hotunplug_complete");
 }
 
 /* --------------------------------------------------------------------- */
@@ -2760,27 +2932,19 @@
 static struct attribute *hotkey_attributes[] __initdata = {
 	&dev_attr_hotkey_enable.attr,
 	&dev_attr_hotkey_bios_enabled.attr,
+	&dev_attr_hotkey_bios_mask.attr,
 	&dev_attr_hotkey_report_mode.attr,
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+	&dev_attr_hotkey_wakeup_reason.attr,
+	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
 	&dev_attr_hotkey_mask.attr,
 	&dev_attr_hotkey_all_mask.attr,
 	&dev_attr_hotkey_recommended_mask.attr,
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 	&dev_attr_hotkey_source_mask.attr,
 	&dev_attr_hotkey_poll_freq.attr,
 #endif
 };
 
-static struct attribute *hotkey_mask_attributes[] __initdata = {
-	&dev_attr_hotkey_bios_mask.attr,
-#ifndef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-	&dev_attr_hotkey_mask.attr,
-	&dev_attr_hotkey_all_mask.attr,
-	&dev_attr_hotkey_recommended_mask.attr,
-#endif
-	&dev_attr_hotkey_wakeup_reason.attr,
-	&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
-};
-
 /*
  * Sync both the hw and sw blocking state of all switches
  */
@@ -2843,16 +3007,16 @@
 
 	kfree(hotkey_keycode_map);
 
-	if (tp_features.hotkey) {
-		dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
-			   "restoring original hot key mask\n");
-		/* no short-circuit boolean operator below! */
-		if ((hotkey_mask_set(hotkey_orig_mask) |
-		     hotkey_status_set(false)) != 0)
-			printk(TPACPI_ERR
-			       "failed to restore hot key mask "
-			       "to BIOS defaults\n");
-	}
+	dbg_printk(TPACPI_DBG_EXIT | TPACPI_DBG_HKEY,
+		   "restoring original HKEY status and mask\n");
+	/* yes, there is a bitwise or below, we want the
+	 * functions to be called even if one of them fail */
+	if (((tp_features.hotkey_mask &&
+	      hotkey_mask_set(hotkey_orig_mask)) |
+	     hotkey_status_set(false)) != 0)
+		printk(TPACPI_ERR
+		       "failed to restore hot key mask "
+		       "to BIOS defaults\n");
 }
 
 static void __init hotkey_unmap(const unsigned int scancode)
@@ -2864,6 +3028,35 @@
 	}
 }
 
+/*
+ * HKEY quirks:
+ *   TPACPI_HK_Q_INIMASK:	Supports FN+F3,FN+F4,FN+F12
+ */
+
+#define	TPACPI_HK_Q_INIMASK	0x0001
+
+static const struct tpacpi_quirk tpacpi_hotkey_qtable[] __initconst = {
+	TPACPI_Q_IBM('I', 'H', TPACPI_HK_Q_INIMASK), /* 600E */
+	TPACPI_Q_IBM('I', 'N', TPACPI_HK_Q_INIMASK), /* 600E */
+	TPACPI_Q_IBM('I', 'D', TPACPI_HK_Q_INIMASK), /* 770, 770E, 770ED */
+	TPACPI_Q_IBM('I', 'W', TPACPI_HK_Q_INIMASK), /* A20m */
+	TPACPI_Q_IBM('I', 'V', TPACPI_HK_Q_INIMASK), /* A20p */
+	TPACPI_Q_IBM('1', '0', TPACPI_HK_Q_INIMASK), /* A21e, A22e */
+	TPACPI_Q_IBM('K', 'U', TPACPI_HK_Q_INIMASK), /* A21e */
+	TPACPI_Q_IBM('K', 'X', TPACPI_HK_Q_INIMASK), /* A21m, A22m */
+	TPACPI_Q_IBM('K', 'Y', TPACPI_HK_Q_INIMASK), /* A21p, A22p */
+	TPACPI_Q_IBM('1', 'B', TPACPI_HK_Q_INIMASK), /* A22e */
+	TPACPI_Q_IBM('1', '3', TPACPI_HK_Q_INIMASK), /* A22m */
+	TPACPI_Q_IBM('1', 'E', TPACPI_HK_Q_INIMASK), /* A30/p (0) */
+	TPACPI_Q_IBM('1', 'C', TPACPI_HK_Q_INIMASK), /* R30 */
+	TPACPI_Q_IBM('1', 'F', TPACPI_HK_Q_INIMASK), /* R31 */
+	TPACPI_Q_IBM('I', 'Y', TPACPI_HK_Q_INIMASK), /* T20 */
+	TPACPI_Q_IBM('K', 'Z', TPACPI_HK_Q_INIMASK), /* T21 */
+	TPACPI_Q_IBM('1', '6', TPACPI_HK_Q_INIMASK), /* T22 */
+	TPACPI_Q_IBM('I', 'Z', TPACPI_HK_Q_INIMASK), /* X20, X21 */
+	TPACPI_Q_IBM('1', 'D', TPACPI_HK_Q_INIMASK), /* X22, X23, X24 */
+};
+
 static int __init hotkey_init(struct ibm_init_struct *iibm)
 {
 	/* Requirements for changing the default keymaps:
@@ -2906,9 +3099,7 @@
 		KEY_UNKNOWN,	/* 0x0D: FN+INSERT */
 		KEY_UNKNOWN,	/* 0x0E: FN+DELETE */
 
-		/* brightness: firmware always reacts to them, unless
-		 * X.org did some tricks in the radeon BIOS scratch
-		 * registers of *some* models */
+		/* brightness: firmware always reacts to them */
 		KEY_RESERVED,	/* 0x0F: FN+HOME (brightness up) */
 		KEY_RESERVED,	/* 0x10: FN+END (brightness down) */
 
@@ -2983,6 +3174,8 @@
 	int status;
 	int hkeyv;
 
+	unsigned long quirks;
+
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 			"initializing hotkey subdriver\n");
 
@@ -3008,9 +3201,16 @@
 	if (!tp_features.hotkey)
 		return 1;
 
+	quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
+				     ARRAY_SIZE(tpacpi_hotkey_qtable));
+
 	tpacpi_disable_brightness_delay();
 
-	hotkey_dev_attributes = create_attr_set(13, NULL);
+	/* MUST have enough space for all attributes to be added to
+	 * hotkey_dev_attributes */
+	hotkey_dev_attributes = create_attr_set(
+					ARRAY_SIZE(hotkey_attributes) + 2,
+					NULL);
 	if (!hotkey_dev_attributes)
 		return -ENOMEM;
 	res = add_many_to_attr_set(hotkey_dev_attributes,
@@ -3019,7 +3219,7 @@
 	if (res)
 		goto err_exit;
 
-	/* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+	/* mask not supported on 600e/x, 770e, 770x, A21e, A2xm/p,
 	   A30, R30, R31, T20-22, X20-21, X22-24.  Detected by checking
 	   for HKEY interface version 0x100 */
 	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
@@ -3033,10 +3233,22 @@
 			 * MHKV 0x100 in A31, R40, R40e,
 			 * T4x, X31, and later
 			 */
-			tp_features.hotkey_mask = 1;
 			vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 				"firmware HKEY interface version: 0x%x\n",
 				hkeyv);
+
+			/* Paranoia check AND init hotkey_all_mask */
+			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+					"MHKA", "qd")) {
+				printk(TPACPI_ERR
+				       "missing MHKA handler, "
+				       "please report this to %s\n",
+				       TPACPI_MAIL);
+				/* Fallback: pre-init for FN+F3,F4,F12 */
+				hotkey_all_mask = 0x080cU;
+			} else {
+				tp_features.hotkey_mask = 1;
+			}
 		}
 	}
 
@@ -3044,32 +3256,23 @@
 		"hotkey masks are %s\n",
 		str_supported(tp_features.hotkey_mask));
 
-	if (tp_features.hotkey_mask) {
-		if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
-				"MHKA", "qd")) {
-			printk(TPACPI_ERR
-			       "missing MHKA handler, "
-			       "please report this to %s\n",
-			       TPACPI_MAIL);
-			/* FN+F12, FN+F4, FN+F3 */
-			hotkey_all_mask = 0x080cU;
-		}
-	}
+	/* Init hotkey_all_mask if not initialized yet */
+	if (!tp_features.hotkey_mask && !hotkey_all_mask &&
+	    (quirks & TPACPI_HK_Q_INIMASK))
+		hotkey_all_mask = 0x080cU;  /* FN+F12, FN+F4, FN+F3 */
 
-	/* hotkey_source_mask *must* be zero for
-	 * the first hotkey_mask_get */
+	/* Init hotkey_acpi_mask and hotkey_orig_mask */
 	if (tp_features.hotkey_mask) {
+		/* hotkey_source_mask *must* be zero for
+		 * the first hotkey_mask_get to return hotkey_orig_mask */
 		res = hotkey_mask_get();
 		if (res)
 			goto err_exit;
 
-		hotkey_orig_mask = hotkey_mask;
-		res = add_many_to_attr_set(
-				hotkey_dev_attributes,
-				hotkey_mask_attributes,
-				ARRAY_SIZE(hotkey_mask_attributes));
-		if (res)
-			goto err_exit;
+		hotkey_orig_mask = hotkey_acpi_mask;
+	} else {
+		hotkey_orig_mask = hotkey_all_mask;
+		hotkey_acpi_mask = hotkey_all_mask;
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_DEBUGFACILITIES
@@ -3183,14 +3386,9 @@
 	}
 
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
-	if (tp_features.hotkey_mask) {
-		hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
-					& ~hotkey_all_mask
-					& ~hotkey_reserved_mask;
-	} else {
-		hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
-					& ~hotkey_reserved_mask;
-	}
+	hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+				& ~hotkey_all_mask
+				& ~hotkey_reserved_mask;
 
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 		    "hotkey source mask 0x%08x, polling freq %u\n",
@@ -3204,13 +3402,18 @@
 		hotkey_exit();
 		return res;
 	}
-	res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
-				& ~hotkey_reserved_mask)
-				| hotkey_orig_mask);
+	res = hotkey_mask_set(((hotkey_all_mask & ~hotkey_reserved_mask)
+			       | hotkey_driver_mask)
+			      & ~hotkey_source_mask);
 	if (res < 0 && res != -ENXIO) {
 		hotkey_exit();
 		return res;
 	}
+	hotkey_user_mask = (hotkey_acpi_mask | hotkey_source_mask)
+				& ~hotkey_reserved_mask;
+	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+		"initial masks: user=0x%08x, fw=0x%08x, poll=0x%08x\n",
+		hotkey_user_mask, hotkey_acpi_mask, hotkey_source_mask);
 
 	dbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
 			"legacy ibm/hotkey event reporting over procfs %s\n",
@@ -3245,7 +3448,7 @@
 	if (scancode > 0 && scancode < 0x21) {
 		scancode--;
 		if (!(hotkey_source_mask & (1 << scancode))) {
-			tpacpi_input_send_key(scancode);
+			tpacpi_input_send_key_masked(scancode);
 			*send_acpi_ev = false;
 		} else {
 			*ignore_acpi_ev = true;
@@ -3264,20 +3467,20 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x2304: /* suspend, undock */
-	case 0x2404: /* hibernation, undock */
+	case TP_HKEY_EV_WKUP_S3_UNDOCK: /* suspend, undock */
+	case TP_HKEY_EV_WKUP_S4_UNDOCK: /* hibernation, undock */
 		hotkey_wakeup_reason = TP_ACPI_WAKEUP_UNDOCK;
 		*ignore_acpi_ev = true;
 		break;
 
-	case 0x2305: /* suspend, bay eject */
-	case 0x2405: /* hibernation, bay eject */
+	case TP_HKEY_EV_WKUP_S3_BAYEJ: /* suspend, bay eject */
+	case TP_HKEY_EV_WKUP_S4_BAYEJ: /* hibernation, bay eject */
 		hotkey_wakeup_reason = TP_ACPI_WAKEUP_BAYEJ;
 		*ignore_acpi_ev = true;
 		break;
 
-	case 0x2313: /* Battery on critical low level (S3) */
-	case 0x2413: /* Battery on critical low level (S4) */
+	case TP_HKEY_EV_WKUP_S3_BATLOW: /* Battery on critical low level/S3 */
+	case TP_HKEY_EV_WKUP_S4_BATLOW: /* Battery on critical low level/S4 */
 		printk(TPACPI_ALERT
 			"EMERGENCY WAKEUP: battery almost empty\n");
 		/* how to auto-heal: */
@@ -3307,21 +3510,21 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x5010: /* Lenovo new BIOS: brightness changed */
-	case 0x500b: /* X61t: tablet pen inserted into bay */
-	case 0x500c: /* X61t: tablet pen removed from bay */
+	case TP_HKEY_EV_PEN_INSERTED:  /* X61t: tablet pen inserted into bay */
+	case TP_HKEY_EV_PEN_REMOVED:   /* X61t: tablet pen removed from bay */
 		return true;
 
-	case 0x5009: /* X41t-X61t: swivel up (tablet mode) */
-	case 0x500a: /* X41t-X61t: swivel down (normal mode) */
+	case TP_HKEY_EV_TABLET_TABLET:   /* X41t-X61t: tablet mode */
+	case TP_HKEY_EV_TABLET_NOTEBOOK: /* X41t-X61t: normal mode */
 		tpacpi_input_send_tabletsw();
 		hotkey_tablet_mode_notify_change();
 		*send_acpi_ev = false;
 		return true;
 
-	case 0x5001:
-	case 0x5002:
-		/* LID switch events.  Do not propagate */
+	case TP_HKEY_EV_LID_CLOSE:	/* Lid closed */
+	case TP_HKEY_EV_LID_OPEN:	/* Lid opened */
+	case TP_HKEY_EV_BRGHT_CHANGED:	/* brightness changed */
+		/* do not propagate these events */
 		*ignore_acpi_ev = true;
 		return true;
 
@@ -3339,30 +3542,30 @@
 	*ignore_acpi_ev = false;
 
 	switch (hkey) {
-	case 0x6011:
+	case TP_HKEY_EV_ALARM_BAT_HOT:
 		printk(TPACPI_CRIT
 			"THERMAL ALARM: battery is too hot!\n");
 		/* recommended action: warn user through gui */
 		return true;
-	case 0x6012:
+	case TP_HKEY_EV_ALARM_BAT_XHOT:
 		printk(TPACPI_ALERT
 			"THERMAL EMERGENCY: battery is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		return true;
-	case 0x6021:
+	case TP_HKEY_EV_ALARM_SENSOR_HOT:
 		printk(TPACPI_CRIT
 			"THERMAL ALARM: "
 			"a sensor reports something is too hot!\n");
 		/* recommended action: warn user through gui, that */
 		/* some internal component is too hot */
 		return true;
-	case 0x6022:
+	case TP_HKEY_EV_ALARM_SENSOR_XHOT:
 		printk(TPACPI_ALERT
 			"THERMAL EMERGENCY: "
 			"a sensor reports something is extremely hot!\n");
 		/* recommended action: immediate sleep/hibernate */
 		return true;
-	case 0x6030:
+	case TP_HKEY_EV_THM_TABLE_CHANGED:
 		printk(TPACPI_INFO
 			"EC reports that Thermal Table has changed\n");
 		/* recommended action: do nothing, we don't have
@@ -3420,7 +3623,7 @@
 			break;
 		case 3:
 			/* 0x3000-0x3FFF: bay-related wakeups */
-			if (hkey == 0x3003) {
+			if (hkey == TP_HKEY_EV_BAYEJ_ACK) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "bay ejected\n");
@@ -3432,7 +3635,7 @@
 			break;
 		case 4:
 			/* 0x4000-0x4FFF: dock-related wakeups */
-			if (hkey == 0x4003) {
+			if (hkey == TP_HKEY_EV_UNDOCK_ACK) {
 				hotkey_autosleep_ack = 1;
 				printk(TPACPI_INFO
 				       "undocked\n");
@@ -3454,7 +3657,8 @@
 			break;
 		case 7:
 			/* 0x7000-0x7FFF: misc */
-			if (tp_features.hotkey_wlsw && hkey == 0x7000) {
+			if (tp_features.hotkey_wlsw &&
+					hkey == TP_HKEY_EV_RFKILL_CHANGED) {
 				tpacpi_send_radiosw_update();
 				send_acpi_ev = 0;
 				known_ev = true;
@@ -3500,10 +3704,12 @@
 {
 	tpacpi_disable_brightness_delay();
 
-	if (hotkey_mask_get())
+	if (hotkey_status_set(true) < 0 ||
+	    hotkey_mask_set(hotkey_acpi_mask) < 0)
 		printk(TPACPI_ERR
-		       "error while trying to read hot key mask "
-		       "from firmware\n");
+		       "error while attempting to reset the event "
+		       "firmware interface\n");
+
 	tpacpi_send_radiosw_update();
 	hotkey_tablet_mode_notify_change();
 	hotkey_wakeup_reason_notify_change();
@@ -3532,8 +3738,8 @@
 		return res;
 
 	len += sprintf(p + len, "status:\t\t%s\n", enabled(status, 0));
-	if (tp_features.hotkey_mask) {
-		len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_mask);
+	if (hotkey_all_mask) {
+		len += sprintf(p + len, "mask:\t\t0x%08x\n", hotkey_user_mask);
 		len += sprintf(p + len,
 			       "commands:\tenable, disable, reset, <mask>\n");
 	} else {
@@ -3570,7 +3776,7 @@
 	if (mutex_lock_killable(&hotkey_mutex))
 		return -ERESTARTSYS;
 
-	mask = hotkey_mask;
+	mask = hotkey_user_mask;
 
 	res = 0;
 	while ((cmd = next_cmd(&buf))) {
@@ -3592,12 +3798,11 @@
 		}
 	}
 
-	if (!res)
+	if (!res) {
 		tpacpi_disclose_usertask("procfs hotkey",
 			"set mask to 0x%08x\n", mask);
-
-	if (!res && mask != hotkey_mask)
-		res = hotkey_mask_set(mask);
+		res = hotkey_user_mask_set(mask);
+	}
 
 errexit:
 	mutex_unlock(&hotkey_mutex);
@@ -6010,8 +6215,10 @@
 					TPACPI_BACKLIGHT_DEV_NAME, NULL, NULL,
 					&ibm_backlight_data);
 	if (IS_ERR(ibm_backlight_device)) {
+		int rc = PTR_ERR(ibm_backlight_device);
+		ibm_backlight_device = NULL;
 		printk(TPACPI_ERR "Could not register backlight device\n");
-		return PTR_ERR(ibm_backlight_device);
+		return rc;
 	}
 	vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_BRGHT,
 			"brightness is supported\n");
@@ -7499,6 +7706,21 @@
  ****************************************************************************
  ****************************************************************************/
 
+/*
+ * HKEY event callout for other subdrivers go here
+ * (yes, it is ugly, but it is quick, safe, and gets the job done
+ */
+static void tpacpi_driver_event(const unsigned int hkey_event)
+{
+}
+
+
+
+static void hotkey_driver_event(const unsigned int scancode)
+{
+	tpacpi_driver_event(TP_HKEY_EV_HOTKEY_BASE + scancode);
+}
+
 /* sysfs name ---------------------------------------------------------- */
 static ssize_t thinkpad_acpi_pdev_name_show(struct device *dev,
 			   struct device_attribute *attr,
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index c07fdb9..83b8b5a 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -153,6 +153,7 @@
 	acpi_handle temp = NULL;
 	acpi_status status;
 	struct pnp_dev *dev;
+	struct acpi_hardware_id *id;
 
 	/*
 	 * If a PnPacpi device is not present , the device
@@ -193,15 +194,12 @@
 	if (dev->capabilities & PNP_CONFIGURABLE)
 		pnpacpi_parse_resource_option_data(dev);
 
-	if (device->flags.compatible_ids) {
-		struct acpica_device_id_list *cid_list = device->pnp.cid_list;
-		int i;
-
-		for (i = 0; i < cid_list->count; i++) {
-			if (!ispnpidacpi(cid_list->ids[i].string))
-				continue;
-			pnp_add_id(dev, cid_list->ids[i].string);
-		}
+	list_for_each_entry(id, &device->pnp.ids, list) {
+		if (!strcmp(id->id, acpi_device_hid(device)))
+			continue;
+		if (!ispnpidacpi(id->id))
+			continue;
+		pnp_add_id(dev, id->id);
 	}
 
 	/* clear out the damaged flags */
@@ -232,9 +230,8 @@
 	struct pnp_dev *pnp = _pnp;
 
 	/* true means it matched */
-	return acpi->flags.hardware_id
-	    && !acpi_get_physical_device(acpi->handle)
-	    && compare_pnp_id(pnp->id, acpi->pnp.hardware_id);
+	return !acpi_get_physical_device(acpi->handle)
+	    && compare_pnp_id(pnp->id, acpi_device_hid(acpi));
 }
 
 static int __init acpi_pnp_find_device(struct device *dev, acpi_handle * handle)
diff --git a/drivers/rtc/rtc-pxa.c b/drivers/rtc/rtc-pxa.c
index bb8cc05..747ca19 100644
--- a/drivers/rtc/rtc-pxa.c
+++ b/drivers/rtc/rtc-pxa.c
@@ -438,34 +438,37 @@
 }
 
 #ifdef CONFIG_PM
-static int pxa_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa_rtc_suspend(struct device *dev)
 {
-	struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		enable_irq_wake(pxa_rtc->irq_Alrm);
 	return 0;
 }
 
-static int pxa_rtc_resume(struct platform_device *pdev)
+static int pxa_rtc_resume(struct device *dev)
 {
-	struct pxa_rtc *pxa_rtc = platform_get_drvdata(pdev);
+	struct pxa_rtc *pxa_rtc = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		disable_irq_wake(pxa_rtc->irq_Alrm);
 	return 0;
 }
-#else
-#define pxa_rtc_suspend	NULL
-#define pxa_rtc_resume	NULL
+
+static struct dev_pm_ops pxa_rtc_pm_ops = {
+	.suspend	= pxa_rtc_suspend,
+	.resume		= pxa_rtc_resume,
+};
 #endif
 
 static struct platform_driver pxa_rtc_driver = {
 	.remove		= __exit_p(pxa_rtc_remove),
-	.suspend	= pxa_rtc_suspend,
-	.resume		= pxa_rtc_resume,
 	.driver		= {
-		.name		= "pxa-rtc",
+		.name	= "pxa-rtc",
+#ifdef CONFIG_PM
+		.pm	= &pxa_rtc_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c
index 021b292..29f98a7 100644
--- a/drivers/rtc/rtc-sa1100.c
+++ b/drivers/rtc/rtc-sa1100.c
@@ -393,31 +393,34 @@
 }
 
 #ifdef CONFIG_PM
-static int sa1100_rtc_suspend(struct platform_device *pdev, pm_message_t state)
+static int sa1100_rtc_suspend(struct device *dev)
 {
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		enable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
 
-static int sa1100_rtc_resume(struct platform_device *pdev)
+static int sa1100_rtc_resume(struct device *dev)
 {
-	if (device_may_wakeup(&pdev->dev))
+	if (device_may_wakeup(dev))
 		disable_irq_wake(IRQ_RTCAlrm);
 	return 0;
 }
-#else
-#define sa1100_rtc_suspend	NULL
-#define sa1100_rtc_resume	NULL
+
+static struct dev_pm_ops sa1100_rtc_pm_ops = {
+	.suspend	= sa1100_rtc_suspend,
+	.resume		= sa1100_rtc_resume,
+};
 #endif
 
 static struct platform_driver sa1100_rtc_driver = {
 	.probe		= sa1100_rtc_probe,
 	.remove		= sa1100_rtc_remove,
-	.suspend	= sa1100_rtc_suspend,
-	.resume		= sa1100_rtc_resume,
 	.driver		= {
-		.name		= "sa1100-rtc",
+		.name	= "sa1100-rtc",
+#ifdef CONFIG_PM
+		.pm	= &sa1100_rtc_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/s390/cio/qdio_debug.c b/drivers/s390/cio/qdio_debug.c
index 1b78f63..7676997 100644
--- a/drivers/s390/cio/qdio_debug.c
+++ b/drivers/s390/cio/qdio_debug.c
@@ -125,7 +125,7 @@
 			   filp->f_path.dentry->d_inode->i_private);
 }
 
-static struct file_operations debugfs_fops = {
+static const struct file_operations debugfs_fops = {
 	.owner	 = THIS_MODULE,
 	.open	 = qstat_seq_open,
 	.read	 = seq_read,
diff --git a/drivers/s390/cio/qdio_perf.c b/drivers/s390/cio/qdio_perf.c
index eff9439..968e3c7 100644
--- a/drivers/s390/cio/qdio_perf.c
+++ b/drivers/s390/cio/qdio_perf.c
@@ -84,7 +84,7 @@
 	return single_open(filp, qdio_perf_proc_show, NULL);
 }
 
-static struct file_operations qdio_perf_proc_fops = {
+static const struct file_operations qdio_perf_proc_fops = {
 	.owner	 = THIS_MODULE,
 	.open	 = qdio_perf_seq_open,
 	.read	 = seq_read,
diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c
index c5b8387..db054ed 100644
--- a/drivers/s390/net/ctcm_main.c
+++ b/drivers/s390/net/ctcm_main.c
@@ -1530,11 +1530,16 @@
 	struct net_device *dev;
 	struct ccw_device *cdev0;
 	struct ccw_device *cdev1;
+	struct channel *readc;
+	struct channel *writec;
 	int ret;
+	int result;
 
 	priv = dev_get_drvdata(&cgdev->dev);
-	if (!priv)
-		return -ENODEV;
+	if (!priv) {
+		result = -ENODEV;
+		goto out_err_result;
+	}
 
 	cdev0 = cgdev->cdev[0];
 	cdev1 = cgdev->cdev[1];
@@ -1545,31 +1550,40 @@
 	snprintf(write_id, CTCM_ID_SIZE, "ch-%s", dev_name(&cdev1->dev));
 
 	ret = add_channel(cdev0, type, priv);
-	if (ret)
-		return ret;
+	if (ret) {
+		result = ret;
+		goto out_err_result;
+	}
 	ret = add_channel(cdev1, type, priv);
-	if (ret)
-		return ret;
+	if (ret) {
+		result = ret;
+		goto out_remove_channel1;
+	}
 
 	ret = ccw_device_set_online(cdev0);
 	if (ret != 0) {
-		/* may be ok to fail now - can be done later */
 		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s(%s) set_online rc=%d",
 				CTCM_FUNTAIL, read_id, ret);
+		result = -EIO;
+		goto out_remove_channel2;
 	}
 
 	ret = ccw_device_set_online(cdev1);
 	if (ret != 0) {
-		/* may be ok to fail now - can be done later */
 		CTCM_DBF_TEXT_(TRACE, CTC_DBF_NOTICE,
 			"%s(%s) set_online rc=%d",
 				CTCM_FUNTAIL, write_id, ret);
+
+		result = -EIO;
+		goto out_ccw1;
 	}
 
 	dev = ctcm_init_netdevice(priv);
-	if (dev == NULL)
-			goto out;
+	if (dev == NULL) {
+		result = -ENODEV;
+		goto out_ccw2;
+	}
 
 	for (direction = READ; direction <= WRITE; direction++) {
 		priv->channel[direction] =
@@ -1587,12 +1601,14 @@
 	/* sysfs magic */
 	SET_NETDEV_DEV(dev, &cgdev->dev);
 
-	if (register_netdev(dev))
-			goto out_dev;
+	if (register_netdev(dev)) {
+		result = -ENODEV;
+		goto out_dev;
+	}
 
 	if (ctcm_add_attributes(&cgdev->dev)) {
-		unregister_netdev(dev);
-			goto out_dev;
+		result = -ENODEV;
+		goto out_unregister;
 	}
 
 	strlcpy(priv->fsm->name, dev->name, sizeof(priv->fsm->name));
@@ -1608,13 +1624,22 @@
 			priv->channel[WRITE]->id, priv->protocol);
 
 	return 0;
+out_unregister:
+	unregister_netdev(dev);
 out_dev:
 	ctcm_free_netdevice(dev);
-out:
+out_ccw2:
 	ccw_device_set_offline(cgdev->cdev[1]);
+out_ccw1:
 	ccw_device_set_offline(cgdev->cdev[0]);
-
-	return -ENODEV;
+out_remove_channel2:
+	readc = channel_get(type, read_id, READ);
+	channel_remove(readc);
+out_remove_channel1:
+	writec = channel_get(type, write_id, WRITE);
+	channel_remove(writec);
+out_err_result:
+	return result;
 }
 
 /**
diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c
index a70de9b..5e46415 100644
--- a/drivers/s390/net/lcs.c
+++ b/drivers/s390/net/lcs.c
@@ -889,7 +889,7 @@
 	rc = lcs_ready_buffer(&card->write, buffer);
 	if (rc)
 		return rc;
-	init_timer(&timer);
+	init_timer_on_stack(&timer);
 	timer.function = lcs_lancmd_timeout;
 	timer.data = (unsigned long) reply;
 	timer.expires = jiffies + HZ*card->lancmd_timeout;
@@ -2130,8 +2130,12 @@
 	card->write.ccwdev = ccwgdev->cdev[1];
 
 	recover_state = card->state;
-	ccw_device_set_online(card->read.ccwdev);
-	ccw_device_set_online(card->write.ccwdev);
+	rc = ccw_device_set_online(card->read.ccwdev);
+	if (rc)
+		goto out_err;
+	rc = ccw_device_set_online(card->write.ccwdev);
+	if (rc)
+		goto out_werr;
 
 	LCS_DBF_TEXT(3, setup, "lcsnewdv");
 
@@ -2210,8 +2214,10 @@
 	return 0;
 out:
 
-	ccw_device_set_offline(card->read.ccwdev);
 	ccw_device_set_offline(card->write.ccwdev);
+out_werr:
+	ccw_device_set_offline(card->read.ccwdev);
+out_err:
 	return -ENODEV;
 }
 
diff --git a/drivers/s390/net/qeth_core.h b/drivers/s390/net/qeth_core.h
index 31a2b4e..e8f72d7 100644
--- a/drivers/s390/net/qeth_core.h
+++ b/drivers/s390/net/qeth_core.h
@@ -849,7 +849,7 @@
 			struct sk_buff *, struct qeth_hdr *, int, int, int);
 int qeth_do_send_packet(struct qeth_card *, struct qeth_qdio_out_q *,
 		    struct sk_buff *, struct qeth_hdr *, int);
-int qeth_core_get_stats_count(struct net_device *);
+int qeth_core_get_sset_count(struct net_device *, int);
 void qeth_core_get_ethtool_stats(struct net_device *,
 				struct ethtool_stats *, u64 *);
 void qeth_core_get_strings(struct net_device *, u32, u8 *);
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index c4a42d9..edee4dc 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -4305,11 +4305,16 @@
 	{"tx csum"},
 };
 
-int qeth_core_get_stats_count(struct net_device *dev)
+int qeth_core_get_sset_count(struct net_device *dev, int stringset)
 {
-	return (sizeof(qeth_ethtool_stats_keys) / ETH_GSTRING_LEN);
+	switch (stringset) {
+	case ETH_SS_STATS:
+		return (sizeof(qeth_ethtool_stats_keys) / ETH_GSTRING_LEN);
+	default:
+		return -EINVAL;
+	}
 }
-EXPORT_SYMBOL_GPL(qeth_core_get_stats_count);
+EXPORT_SYMBOL_GPL(qeth_core_get_sset_count);
 
 void qeth_core_get_ethtool_stats(struct net_device *dev,
 		struct ethtool_stats *stats, u64 *data)
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index f4f3ca1..b61d5c7 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -866,7 +866,7 @@
 	.get_link = ethtool_op_get_link,
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 	.get_settings = qeth_core_ethtool_get_settings,
 };
@@ -874,7 +874,7 @@
 static const struct ethtool_ops qeth_l2_osn_ops = {
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 };
 
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 073b6d3..4ca28c1 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -2957,7 +2957,7 @@
 	.set_tso     = qeth_l3_ethtool_set_tso,
 	.get_strings = qeth_core_get_strings,
 	.get_ethtool_stats = qeth_core_get_ethtool_stats,
-	.get_stats_count = qeth_core_get_stats_count,
+	.get_sset_count = qeth_core_get_sset_count,
 	.get_drvinfo = qeth_core_get_drvinfo,
 	.get_settings = qeth_core_ethtool_get_settings,
 };
diff --git a/drivers/scsi/pmcraid.h b/drivers/scsi/pmcraid.h
index 614b3a7..3441b3f 100644
--- a/drivers/scsi/pmcraid.h
+++ b/drivers/scsi/pmcraid.h
@@ -26,7 +26,6 @@
 #include <linux/completion.h>
 #include <linux/list.h>
 #include <scsi/scsi.h>
-#include <linux/kref.h>
 #include <scsi/scsi_cmnd.h>
 #include <linux/cdev.h>
 #include <net/netlink.h>
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 848b594..747a5e5 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1185,7 +1185,7 @@
 	return VM_FAULT_SIGBUS;
 }
 
-static struct vm_operations_struct sg_mmap_vm_ops = {
+static const struct vm_operations_struct sg_mmap_vm_ops = {
 	.fault = sg_vma_fault,
 };
 
@@ -1317,7 +1317,7 @@
 	}
 }
 
-static struct file_operations sg_fops = {
+static const struct file_operations sg_fops = {
 	.owner = THIS_MODULE,
 	.read = sg_read,
 	.write = sg_write,
@@ -2194,9 +2194,11 @@
 static int sg_proc_single_open_adio(struct inode *inode, struct file *file);
 static ssize_t sg_proc_write_adio(struct file *filp, const char __user *buffer,
 			          size_t count, loff_t *off);
-static struct file_operations adio_fops = {
-	/* .owner, .read and .llseek added in sg_proc_init() */
+static const struct file_operations adio_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_adio,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.write = sg_proc_write_adio,
 	.release = single_release,
 };
@@ -2204,23 +2206,32 @@
 static int sg_proc_single_open_dressz(struct inode *inode, struct file *file);
 static ssize_t sg_proc_write_dressz(struct file *filp, 
 		const char __user *buffer, size_t count, loff_t *off);
-static struct file_operations dressz_fops = {
+static const struct file_operations dressz_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_dressz,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.write = sg_proc_write_dressz,
 	.release = single_release,
 };
 
 static int sg_proc_seq_show_version(struct seq_file *s, void *v);
 static int sg_proc_single_open_version(struct inode *inode, struct file *file);
-static struct file_operations version_fops = {
+static const struct file_operations version_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_version,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = single_release,
 };
 
 static int sg_proc_seq_show_devhdr(struct seq_file *s, void *v);
 static int sg_proc_single_open_devhdr(struct inode *inode, struct file *file);
-static struct file_operations devhdr_fops = {
+static const struct file_operations devhdr_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_single_open_devhdr,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = single_release,
 };
 
@@ -2229,8 +2240,11 @@
 static void * dev_seq_start(struct seq_file *s, loff_t *pos);
 static void * dev_seq_next(struct seq_file *s, void *v, loff_t *pos);
 static void dev_seq_stop(struct seq_file *s, void *v);
-static struct file_operations dev_fops = {
+static const struct file_operations dev_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_dev,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations dev_seq_ops = {
@@ -2242,8 +2256,11 @@
 
 static int sg_proc_seq_show_devstrs(struct seq_file *s, void *v);
 static int sg_proc_open_devstrs(struct inode *inode, struct file *file);
-static struct file_operations devstrs_fops = {
+static const struct file_operations devstrs_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_devstrs,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations devstrs_seq_ops = {
@@ -2255,8 +2272,11 @@
 
 static int sg_proc_seq_show_debug(struct seq_file *s, void *v);
 static int sg_proc_open_debug(struct inode *inode, struct file *file);
-static struct file_operations debug_fops = {
+static const struct file_operations debug_fops = {
+	.owner = THIS_MODULE,
 	.open = sg_proc_open_debug,
+	.read = seq_read,
+	.llseek = seq_lseek,
 	.release = seq_release,
 };
 static const struct seq_operations debug_seq_ops = {
@@ -2269,7 +2289,7 @@
 
 struct sg_proc_leaf {
 	const char * name;
-	struct file_operations * fops;
+	const struct file_operations * fops;
 };
 
 static struct sg_proc_leaf sg_proc_leaf_arr[] = {
@@ -2295,9 +2315,6 @@
 	for (k = 0; k < num_leaves; ++k) {
 		leaf = &sg_proc_leaf_arr[k];
 		mask = leaf->fops->write ? S_IRUGO | S_IWUSR : S_IRUGO;
-		leaf->fops->owner = THIS_MODULE;
-		leaf->fops->read = seq_read;
-		leaf->fops->llseek = seq_lseek;
 		proc_create(leaf->name, mask, sg_proc_sgp, leaf->fops);
 	}
 	return 0;
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 2209620..b1ae774 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -64,6 +64,8 @@
 	return (serial8250_reg.minor - 64) + port->line;
 }
 
+static unsigned int skip_txen_test; /* force skip of txen test at init time */
+
 /*
  * Debugging.
  */
@@ -2108,7 +2110,7 @@
 	   is variable. So, let's just don't test if we receive
 	   TX irq. This way, we'll never enable UART_BUG_TXEN.
 	 */
-	if (up->port.flags & UPF_NO_TXEN_TEST)
+	if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
 		goto dont_test_tx_en;
 
 	/*
@@ -3248,6 +3250,9 @@
 module_param(nr_uarts, uint, 0644);
 MODULE_PARM_DESC(nr_uarts, "Maximum number of UARTs supported. (1-" __MODULE_STRING(CONFIG_SERIAL_8250_NR_UARTS) ")");
 
+module_param(skip_txen_test, uint, 0644);
+MODULE_PARM_DESC(skip_txen_test, "Skip checking for the TXEN bug at init time");
+
 #ifdef CONFIG_SERIAL_8250_RSA
 module_param_array(probe_rsa, ulong, &probe_rsa_count, 0444);
 MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 03422ce..e522572 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -862,7 +862,7 @@
 
 config SERIAL_UARTLITE
 	tristate "Xilinx uartlite serial port support"
-	depends on PPC32 || MICROBLAZE
+	depends on PPC32 || MICROBLAZE || MFD_TIMBERDALE
 	select SERIAL_CORE
 	help
 	  Say Y here if you want to use the Xilinx uartlite serial controller.
@@ -1458,4 +1458,23 @@
 	---help---
 	Add support for UART controller on timberdale.
 
+config SERIAL_BCM63XX
+	tristate "bcm63xx serial port support"
+	select SERIAL_CORE
+	depends on BCM63XX
+	help
+	  If you have a bcm63xx CPU, you can enable its onboard
+	  serial port by enabling this options.
+
+          To compile this driver as a module, choose M here: the
+          module will be called bcm963xx_uart.
+
+config SERIAL_BCM63XX_CONSOLE
+	bool "Console on bcm63xx serial port"
+	depends on SERIAL_BCM63XX=y
+	select SERIAL_CORE_CONSOLE
+	help
+	  If you have enabled the serial port on the bcm63xx CPU
+	  you can make it the console by answering Y to this option.
+
 endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 97f6fcc..d21d5dd 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -34,6 +34,7 @@
 obj-$(CONFIG_SERIAL_PXA) += pxa.o
 obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
 obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
+obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
 obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
 obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
 obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
diff --git a/drivers/serial/bcm63xx_uart.c b/drivers/serial/bcm63xx_uart.c
new file mode 100644
index 0000000..beddaa6
--- /dev/null
+++ b/drivers/serial/bcm63xx_uart.c
@@ -0,0 +1,890 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Derived from many drivers using generic_serial interface.
+ *
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ *
+ *  Serial driver for BCM63xx integrated UART.
+ *
+ * Hardware flow control was _not_ tested since I only have RX/TX on
+ * my board.
+ */
+
+#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/console.h>
+#include <linux/clk.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/sysrq.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+
+#include <bcm63xx_clk.h>
+#include <bcm63xx_irq.h>
+#include <bcm63xx_regs.h>
+#include <bcm63xx_io.h>
+
+#define BCM63XX_NR_UARTS	1
+
+static struct uart_port ports[BCM63XX_NR_UARTS];
+
+/*
+ * rx interrupt mask / stat
+ *
+ * mask:
+ *  - rx fifo full
+ *  - rx fifo above threshold
+ *  - rx fifo not empty for too long
+ */
+#define UART_RX_INT_MASK	(UART_IR_MASK(UART_IR_RXOVER) |		\
+				UART_IR_MASK(UART_IR_RXTHRESH) |	\
+				UART_IR_MASK(UART_IR_RXTIMEOUT))
+
+#define UART_RX_INT_STAT	(UART_IR_STAT(UART_IR_RXOVER) |		\
+				UART_IR_STAT(UART_IR_RXTHRESH) |	\
+				UART_IR_STAT(UART_IR_RXTIMEOUT))
+
+/*
+ * tx interrupt mask / stat
+ *
+ * mask:
+ * - tx fifo empty
+ * - tx fifo below threshold
+ */
+#define UART_TX_INT_MASK	(UART_IR_MASK(UART_IR_TXEMPTY) |	\
+				UART_IR_MASK(UART_IR_TXTRESH))
+
+#define UART_TX_INT_STAT	(UART_IR_STAT(UART_IR_TXEMPTY) |	\
+				UART_IR_STAT(UART_IR_TXTRESH))
+
+/*
+ * external input interrupt
+ *
+ * mask: any edge on CTS, DCD
+ */
+#define UART_EXTINP_INT_MASK	(UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
+				 UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
+
+/*
+ * handy uart register accessor
+ */
+static inline unsigned int bcm_uart_readl(struct uart_port *port,
+					 unsigned int offset)
+{
+	return bcm_readl(port->membase + offset);
+}
+
+static inline void bcm_uart_writel(struct uart_port *port,
+				  unsigned int value, unsigned int offset)
+{
+	bcm_writel(value, port->membase + offset);
+}
+
+/*
+ * serial core request to check if uart tx fifo is empty
+ */
+static unsigned int bcm_uart_tx_empty(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
+}
+
+/*
+ * serial core request to set RTS and DTR pin state and loopback mode
+ */
+static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
+	/* invert of written value is reflected on the pin */
+	if (!(mctrl & TIOCM_DTR))
+		val |= UART_MCTL_DTR_MASK;
+	if (!(mctrl & TIOCM_RTS))
+		val |= UART_MCTL_RTS_MASK;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (mctrl & TIOCM_LOOP)
+		val |= UART_CTL_LOOPBACK_MASK;
+	else
+		val &= ~UART_CTL_LOOPBACK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to return RI, CTS, DCD and DSR pin state
+ */
+static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
+{
+	unsigned int val, mctrl;
+
+	mctrl = 0;
+	val = bcm_uart_readl(port, UART_EXTINP_REG);
+	if (val & UART_EXTINP_RI_MASK)
+		mctrl |= TIOCM_RI;
+	if (val & UART_EXTINP_CTS_MASK)
+		mctrl |= TIOCM_CTS;
+	if (val & UART_EXTINP_DCD_MASK)
+		mctrl |= TIOCM_CD;
+	if (val & UART_EXTINP_DSR_MASK)
+		mctrl |= TIOCM_DSR;
+	return mctrl;
+}
+
+/*
+ * serial core request to disable tx ASAP (used for flow control)
+ */
+static void bcm_uart_stop_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_TXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to (re)enable tx
+ */
+static void bcm_uart_start_tx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_TXEN_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * serial core request to stop rx, called before port shutdown
+ */
+static void bcm_uart_stop_rx(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_RX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to enable modem status interrupt reporting
+ */
+static void bcm_uart_enable_ms(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val |= UART_IR_MASK(UART_IR_EXTIP);
+	bcm_uart_writel(port, val, UART_IR_REG);
+}
+
+/*
+ * serial core request to start/stop emitting break char
+ */
+static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
+{
+	unsigned long flags;
+	unsigned int val;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	if (ctl)
+		val |= UART_CTL_XMITBRK_MASK;
+	else
+		val &= ~UART_CTL_XMITBRK_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * return port type in string format
+ */
+static const char *bcm_uart_type(struct uart_port *port)
+{
+	return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
+}
+
+/*
+ * read all chars in rx fifo and send them to core
+ */
+static void bcm_uart_do_rx(struct uart_port *port)
+{
+	struct tty_struct *tty;
+	unsigned int max_count;
+
+	/* limit number of char read in interrupt, should not be
+	 * higher than fifo size anyway since we're much faster than
+	 * serial port */
+	max_count = 32;
+	tty = port->info->port.tty;
+	do {
+		unsigned int iestat, c, cstat;
+		char flag;
+
+		/* get overrun/fifo empty information from ier
+		 * register */
+		iestat = bcm_uart_readl(port, UART_IR_REG);
+		if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
+			break;
+
+		cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
+		port->icount.rx++;
+		flag = TTY_NORMAL;
+		c &= 0xff;
+
+		if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
+			/* do stats first */
+			if (cstat & UART_FIFO_BRKDET_MASK) {
+				port->icount.brk++;
+				if (uart_handle_break(port))
+					continue;
+			}
+
+			if (cstat & UART_FIFO_PARERR_MASK)
+				port->icount.parity++;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				port->icount.frame++;
+
+			/* update flag wrt read_status_mask */
+			cstat &= port->read_status_mask;
+			if (cstat & UART_FIFO_BRKDET_MASK)
+				flag = TTY_BREAK;
+			if (cstat & UART_FIFO_FRAMEERR_MASK)
+				flag = TTY_FRAME;
+			if (cstat & UART_FIFO_PARERR_MASK)
+				flag = TTY_PARITY;
+		}
+
+		if (uart_handle_sysrq_char(port, c))
+			continue;
+
+		if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
+			port->icount.overrun++;
+			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+		}
+
+		if ((cstat & port->ignore_status_mask) == 0)
+			tty_insert_flip_char(tty, c, flag);
+
+	} while (--max_count);
+
+	tty_flip_buffer_push(tty);
+}
+
+/*
+ * fill tx fifo with chars to send, stop when fifo is about to be full
+ * or when all chars have been sent.
+ */
+static void bcm_uart_do_tx(struct uart_port *port)
+{
+	struct circ_buf *xmit;
+	unsigned int val, max_count;
+
+	if (port->x_char) {
+		bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
+		port->icount.tx++;
+		port->x_char = 0;
+		return;
+	}
+
+	if (uart_tx_stopped(port)) {
+		bcm_uart_stop_tx(port);
+		return;
+	}
+
+	xmit = &port->info->xmit;
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
+	max_count = port->fifosize - val;
+
+	while (max_count--) {
+		unsigned int c;
+
+		c = xmit->buf[xmit->tail];
+		bcm_uart_writel(port, c, UART_FIFO_REG);
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		port->icount.tx++;
+		if (uart_circ_empty(xmit))
+			break;
+	}
+
+	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+		uart_write_wakeup(port);
+
+	if (uart_circ_empty(xmit))
+		goto txq_empty;
+	return;
+
+txq_empty:
+	/* nothing to send, disable transmit interrupt */
+	val = bcm_uart_readl(port, UART_IR_REG);
+	val &= ~UART_TX_INT_MASK;
+	bcm_uart_writel(port, val, UART_IR_REG);
+	return;
+}
+
+/*
+ * process uart interrupt
+ */
+static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
+{
+	struct uart_port *port;
+	unsigned int irqstat;
+
+	port = dev_id;
+	spin_lock(&port->lock);
+
+	irqstat = bcm_uart_readl(port, UART_IR_REG);
+	if (irqstat & UART_RX_INT_STAT)
+		bcm_uart_do_rx(port);
+
+	if (irqstat & UART_TX_INT_STAT)
+		bcm_uart_do_tx(port);
+
+	if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
+		unsigned int estat;
+
+		estat = bcm_uart_readl(port, UART_EXTINP_REG);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
+			uart_handle_cts_change(port,
+					       estat & UART_EXTINP_CTS_MASK);
+		if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
+			uart_handle_dcd_change(port,
+					       estat & UART_EXTINP_DCD_MASK);
+	}
+
+	spin_unlock(&port->lock);
+	return IRQ_HANDLED;
+}
+
+/*
+ * enable rx & tx operation on uart
+ */
+static void bcm_uart_enable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * disable rx & tx operation on uart
+ */
+static void bcm_uart_disable(struct uart_port *port)
+{
+	unsigned int val;
+
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
+		 UART_CTL_RXEN_MASK);
+	bcm_uart_writel(port, val, UART_CTL_REG);
+}
+
+/*
+ * clear all unread data in rx fifo and unsent data in tx fifo
+ */
+static void bcm_uart_flush(struct uart_port *port)
+{
+	unsigned int val;
+
+	/* empty rx and tx fifo */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* read any pending char to make sure all irq status are
+	 * cleared */
+	(void)bcm_uart_readl(port, UART_FIFO_REG);
+}
+
+/*
+ * serial core request to initialize uart and start rx operation
+ */
+static int bcm_uart_startup(struct uart_port *port)
+{
+	unsigned int val;
+	int ret;
+
+	/* mask all irq and flush port */
+	bcm_uart_disable(port);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	bcm_uart_flush(port);
+
+	/* clear any pending external input interrupt */
+	(void)bcm_uart_readl(port, UART_EXTINP_REG);
+
+	/* set rx/tx fifo thresh to fifo half size */
+	val = bcm_uart_readl(port, UART_MCTL_REG);
+	val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
+	val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
+	val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
+	bcm_uart_writel(port, val, UART_MCTL_REG);
+
+	/* set rx fifo timeout to 1 char time */
+	val = bcm_uart_readl(port, UART_CTL_REG);
+	val &= ~UART_CTL_RXTMOUTCNT_MASK;
+	val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
+	bcm_uart_writel(port, val, UART_CTL_REG);
+
+	/* report any edge on dcd and cts */
+	val = UART_EXTINP_INT_MASK;
+	val |= UART_EXTINP_DCD_NOSENSE_MASK;
+	val |= UART_EXTINP_CTS_NOSENSE_MASK;
+	bcm_uart_writel(port, val, UART_EXTINP_REG);
+
+	/* register irq and enable rx interrupts */
+	ret = request_irq(port->irq, bcm_uart_interrupt, 0,
+			  bcm_uart_type(port), port);
+	if (ret)
+		return ret;
+	bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
+	bcm_uart_enable(port);
+	return 0;
+}
+
+/*
+ * serial core request to flush & disable uart
+ */
+static void bcm_uart_shutdown(struct uart_port *port)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	bcm_uart_writel(port, 0, UART_IR_REG);
+	spin_unlock_irqrestore(&port->lock, flags);
+
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+	free_irq(port->irq, port);
+}
+
+/*
+ * serial core request to change current uart setting
+ */
+static void bcm_uart_set_termios(struct uart_port *port,
+				 struct ktermios *new,
+				 struct ktermios *old)
+{
+	unsigned int ctl, baud, quot, ier;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+
+	/* disable uart while changing speed */
+	bcm_uart_disable(port);
+	bcm_uart_flush(port);
+
+	/* update Control register */
+	ctl = bcm_uart_readl(port, UART_CTL_REG);
+	ctl &= ~UART_CTL_BITSPERSYM_MASK;
+
+	switch (new->c_cflag & CSIZE) {
+	case CS5:
+		ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS6:
+		ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	case CS7:
+		ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	default:
+		ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
+		break;
+	}
+
+	ctl &= ~UART_CTL_STOPBITS_MASK;
+	if (new->c_cflag & CSTOPB)
+		ctl |= UART_CTL_STOPBITS_2;
+	else
+		ctl |= UART_CTL_STOPBITS_1;
+
+	ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	if (new->c_cflag & PARENB)
+		ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
+	ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	if (new->c_cflag & PARODD)
+		ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
+	bcm_uart_writel(port, ctl, UART_CTL_REG);
+
+	/* update Baudword register */
+	baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+	quot = uart_get_divisor(port, baud) - 1;
+	bcm_uart_writel(port, quot, UART_BAUD_REG);
+
+	/* update Interrupt register */
+	ier = bcm_uart_readl(port, UART_IR_REG);
+
+	ier &= ~UART_IR_MASK(UART_IR_EXTIP);
+	if (UART_ENABLE_MS(port, new->c_cflag))
+		ier |= UART_IR_MASK(UART_IR_EXTIP);
+
+	bcm_uart_writel(port, ier, UART_IR_REG);
+
+	/* update read/ignore mask */
+	port->read_status_mask = UART_FIFO_VALID_MASK;
+	if (new->c_iflag & INPCK) {
+		port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
+		port->read_status_mask |= UART_FIFO_PARERR_MASK;
+	}
+	if (new->c_iflag & (BRKINT))
+		port->read_status_mask |= UART_FIFO_BRKDET_MASK;
+
+	port->ignore_status_mask = 0;
+	if (new->c_iflag & IGNPAR)
+		port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
+	if (new->c_iflag & IGNBRK)
+		port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
+	if (!(new->c_cflag & CREAD))
+		port->ignore_status_mask |= UART_FIFO_VALID_MASK;
+
+	uart_update_timeout(port, new->c_cflag, baud);
+	bcm_uart_enable(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+/*
+ * serial core request to claim uart iomem
+ */
+static int bcm_uart_request_port(struct uart_port *port)
+{
+	unsigned int size;
+
+	size = RSET_UART_SIZE;
+	if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
+		dev_err(port->dev, "Memory region busy\n");
+		return -EBUSY;
+	}
+
+	port->membase = ioremap(port->mapbase, size);
+	if (!port->membase) {
+		dev_err(port->dev, "Unable to map registers\n");
+		release_mem_region(port->mapbase, size);
+		return -EBUSY;
+	}
+	return 0;
+}
+
+/*
+ * serial core request to release uart iomem
+ */
+static void bcm_uart_release_port(struct uart_port *port)
+{
+	release_mem_region(port->mapbase, RSET_UART_SIZE);
+	iounmap(port->membase);
+}
+
+/*
+ * serial core request to do any port required autoconfiguration
+ */
+static void bcm_uart_config_port(struct uart_port *port, int flags)
+{
+	if (flags & UART_CONFIG_TYPE) {
+		if (bcm_uart_request_port(port))
+			return;
+		port->type = PORT_BCM63XX;
+	}
+}
+
+/*
+ * serial core request to check that port information in serinfo are
+ * suitable
+ */
+static int bcm_uart_verify_port(struct uart_port *port,
+				struct serial_struct *serinfo)
+{
+	if (port->type != PORT_BCM63XX)
+		return -EINVAL;
+	if (port->irq != serinfo->irq)
+		return -EINVAL;
+	if (port->iotype != serinfo->io_type)
+		return -EINVAL;
+	if (port->mapbase != (unsigned long)serinfo->iomem_base)
+		return -EINVAL;
+	return 0;
+}
+
+/* serial core callbacks */
+static struct uart_ops bcm_uart_ops = {
+	.tx_empty	= bcm_uart_tx_empty,
+	.get_mctrl	= bcm_uart_get_mctrl,
+	.set_mctrl	= bcm_uart_set_mctrl,
+	.start_tx	= bcm_uart_start_tx,
+	.stop_tx	= bcm_uart_stop_tx,
+	.stop_rx	= bcm_uart_stop_rx,
+	.enable_ms	= bcm_uart_enable_ms,
+	.break_ctl	= bcm_uart_break_ctl,
+	.startup	= bcm_uart_startup,
+	.shutdown	= bcm_uart_shutdown,
+	.set_termios	= bcm_uart_set_termios,
+	.type		= bcm_uart_type,
+	.release_port	= bcm_uart_release_port,
+	.request_port	= bcm_uart_request_port,
+	.config_port	= bcm_uart_config_port,
+	.verify_port	= bcm_uart_verify_port,
+};
+
+
+
+#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
+static inline void wait_for_xmitr(struct uart_port *port)
+{
+	unsigned int tmout;
+
+	/* Wait up to 10ms for the character(s) to be sent. */
+	tmout = 10000;
+	while (--tmout) {
+		unsigned int val;
+
+		val = bcm_uart_readl(port, UART_IR_REG);
+		if (val & UART_IR_STAT(UART_IR_TXEMPTY))
+			break;
+		udelay(1);
+	}
+
+	/* Wait up to 1s for flow control if necessary */
+	if (port->flags & UPF_CONS_FLOW) {
+		tmout = 1000000;
+		while (--tmout) {
+			unsigned int val;
+
+			val = bcm_uart_readl(port, UART_EXTINP_REG);
+			if (val & UART_EXTINP_CTS_MASK)
+				break;
+			udelay(1);
+		}
+	}
+}
+
+/*
+ * output given char
+ */
+static void bcm_console_putchar(struct uart_port *port, int ch)
+{
+	wait_for_xmitr(port);
+	bcm_uart_writel(port, ch, UART_FIFO_REG);
+}
+
+/*
+ * console core request to output given string
+ */
+static void bcm_console_write(struct console *co, const char *s,
+			      unsigned int count)
+{
+	struct uart_port *port;
+	unsigned long flags;
+	int locked;
+
+	port = &ports[co->index];
+
+	local_irq_save(flags);
+	if (port->sysrq) {
+		/* bcm_uart_interrupt() already took the lock */
+		locked = 0;
+	} else if (oops_in_progress) {
+		locked = spin_trylock(&port->lock);
+	} else {
+		spin_lock(&port->lock);
+		locked = 1;
+	}
+
+	/* call helper to deal with \r\n */
+	uart_console_write(port, s, count, bcm_console_putchar);
+
+	/* and wait for char to be transmitted */
+	wait_for_xmitr(port);
+
+	if (locked)
+		spin_unlock(&port->lock);
+	local_irq_restore(flags);
+}
+
+/*
+ * console core request to setup given console, find matching uart
+ * port and setup it.
+ */
+static int bcm_console_setup(struct console *co, char *options)
+{
+	struct uart_port *port;
+	int baud = 9600;
+	int bits = 8;
+	int parity = 'n';
+	int flow = 'n';
+
+	if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+	port = &ports[co->index];
+	if (!port->membase)
+		return -ENODEV;
+	if (options)
+		uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+	return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver bcm_uart_driver;
+
+static struct console bcm63xx_console = {
+	.name		= "ttyS",
+	.write		= bcm_console_write,
+	.device		= uart_console_device,
+	.setup		= bcm_console_setup,
+	.flags		= CON_PRINTBUFFER,
+	.index		= -1,
+	.data		= &bcm_uart_driver,
+};
+
+static int __init bcm63xx_console_init(void)
+{
+	register_console(&bcm63xx_console);
+	return 0;
+}
+
+console_initcall(bcm63xx_console_init);
+
+#define BCM63XX_CONSOLE	(&bcm63xx_console)
+#else
+#define BCM63XX_CONSOLE	NULL
+#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
+
+static struct uart_driver bcm_uart_driver = {
+	.owner		= THIS_MODULE,
+	.driver_name	= "bcm63xx_uart",
+	.dev_name	= "ttyS",
+	.major		= TTY_MAJOR,
+	.minor		= 64,
+	.nr		= 1,
+	.cons		= BCM63XX_CONSOLE,
+};
+
+/*
+ * platform driver probe/remove callback
+ */
+static int __devinit bcm_uart_probe(struct platform_device *pdev)
+{
+	struct resource *res_mem, *res_irq;
+	struct uart_port *port;
+	struct clk *clk;
+	int ret;
+
+	if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
+		return -EINVAL;
+
+	if (ports[pdev->id].membase)
+		return -EBUSY;
+
+	res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res_mem)
+		return -ENODEV;
+
+	res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	if (!res_irq)
+		return -ENODEV;
+
+	clk = clk_get(&pdev->dev, "periph");
+	if (IS_ERR(clk))
+		return -ENODEV;
+
+	port = &ports[pdev->id];
+	memset(port, 0, sizeof(*port));
+	port->iotype = UPIO_MEM;
+	port->mapbase = res_mem->start;
+	port->irq = res_irq->start;
+	port->ops = &bcm_uart_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->dev = &pdev->dev;
+	port->fifosize = 16;
+	port->uartclk = clk_get_rate(clk) / 2;
+	clk_put(clk);
+
+	ret = uart_add_one_port(&bcm_uart_driver, port);
+	if (ret) {
+		kfree(port);
+		return ret;
+	}
+	platform_set_drvdata(pdev, port);
+	return 0;
+}
+
+static int __devexit bcm_uart_remove(struct platform_device *pdev)
+{
+	struct uart_port *port;
+
+	port = platform_get_drvdata(pdev);
+	uart_remove_one_port(&bcm_uart_driver, port);
+	platform_set_drvdata(pdev, NULL);
+	/* mark port as free */
+	ports[pdev->id].membase = 0;
+	return 0;
+}
+
+/*
+ * platform driver stuff
+ */
+static struct platform_driver bcm_uart_platform_driver = {
+	.probe	= bcm_uart_probe,
+	.remove	= __devexit_p(bcm_uart_remove),
+	.driver	= {
+		.owner = THIS_MODULE,
+		.name  = "bcm63xx_uart",
+	},
+};
+
+static int __init bcm_uart_init(void)
+{
+	int ret;
+
+	ret = uart_register_driver(&bcm_uart_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&bcm_uart_platform_driver);
+	if (ret)
+		uart_unregister_driver(&bcm_uart_driver);
+
+	return ret;
+}
+
+static void __exit bcm_uart_exit(void)
+{
+	platform_driver_unregister(&bcm_uart_platform_driver);
+	uart_unregister_driver(&bcm_uart_driver);
+}
+
+module_init(bcm_uart_init);
+module_exit(bcm_uart_exit);
+
+MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
+MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 8d349b23..300cea7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -649,7 +649,7 @@
 	u8 *p;
 	int count;
 	struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
-	struct circ_buf *xmit = &port->info->xmit;
+	struct circ_buf *xmit = &port->state->xmit;
 
 	/* Handle xon/xoff */
 	if (port->x_char) {
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7be52fe..31f1723 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -18,6 +18,7 @@
 #include <linux/tty.h>
 #include <linux/tty_flip.h>
 #include <linux/major.h>
+#include <linux/smp_lock.h>
 #include <linux/string.h>
 #include <linux/fcntl.h>
 #include <linux/mm.h>
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 2d7feec..0028b6f 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -307,7 +307,7 @@
 	if (port < 4) {
 		temp = readl(stop_proc[port].global_control_reg);
 		temp =
-	    		(temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
+			(temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
 		writel(temp, stop_proc[port].global_control_reg);
 
 		/* write flush */
@@ -336,7 +336,7 @@
 	if (port < 4) {
 		temp = readl(start_proc[port].global_control_reg);
 		temp =
-	    		(temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
+			(temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
 		writel(temp, start_proc[port].global_control_reg);
 
 		/* write flush */
@@ -509,8 +509,8 @@
 		dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
 	}
 
-      if (new_page != NULL)
-	      pci_free_consistent(dev, 4096, new_page, temp_pci);
+	if (new_page != NULL)
+		pci_free_consistent(dev, 4096, new_page, temp_pci);
 }
 
 static int startup(struct icom_port *icom_port)
@@ -1493,15 +1493,15 @@
 				const struct pci_device_id *ent)
 {
 	int index;
-        unsigned int command_reg;
-        int retval;
-        struct icom_adapter *icom_adapter;
-        struct icom_port *icom_port;
+	unsigned int command_reg;
+	int retval;
+	struct icom_adapter *icom_adapter;
+	struct icom_port *icom_port;
 
-        retval = pci_enable_device(dev);
-        if (retval) {
+	retval = pci_enable_device(dev);
+	if (retval) {
 		dev_err(&dev->dev, "Device enable FAILED\n");
-                return retval;
+		return retval;
 	}
 
 	if ( (retval = pci_request_regions(dev, "icom"))) {
@@ -1510,23 +1510,23 @@
 		 return retval;
 	 }
 
-        pci_set_master(dev);
+	pci_set_master(dev);
 
-        if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
+	if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
 		dev_err(&dev->dev, "PCI Config read FAILED\n");
-                return retval;
-        }
+		return retval;
+	}
 
 	pci_write_config_dword(dev, PCI_COMMAND,
 		command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
  		| PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
 
-        if (ent->driver_data == ADAPTER_V1) {
+	if (ent->driver_data == ADAPTER_V1) {
 		pci_write_config_dword(dev, 0x44, 0x8300830A);
-	 } else {
+	} else {
 		pci_write_config_dword(dev, 0x44, 0x42004200);
 		pci_write_config_dword(dev, 0x48, 0x42004200);
-         }
+	}
 
 
 	retval = icom_alloc_adapter(&icom_adapter);
@@ -1536,10 +1536,10 @@
 		 goto probe_exit0;
 	}
 
-	 icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
-	 icom_adapter->pci_dev = dev;
-	 icom_adapter->version = ent->driver_data;
-	 icom_adapter->subsystem_id = ent->subdevice;
+	icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
+	icom_adapter->pci_dev = dev;
+	icom_adapter->version = ent->driver_data;
+	icom_adapter->subsystem_id = ent->subdevice;
 
 
 	retval = icom_init_ports(icom_adapter);
@@ -1548,7 +1548,7 @@
 		goto probe_exit1;
 	}
 
-	 icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
+	icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
 
 	if (!icom_adapter->base_addr)
 		goto probe_exit1;
@@ -1562,7 +1562,7 @@
 
 	retval = icom_load_ports(icom_adapter);
 
-        for (index = 0; index < icom_adapter->numb_ports; index++) {
+	for (index = 0; index < icom_adapter->numb_ports; index++) {
 		icom_port = &icom_adapter->port_info[index];
 
 		if (icom_port->status == ICOM_PORT_ACTIVE) {
@@ -1579,7 +1579,7 @@
 				icom_port->status = ICOM_PORT_OFF;
 				dev_err(&dev->dev, "Device add failed\n");
 			 } else
-			        dev_info(&dev->dev, "Device added\n");
+				dev_info(&dev->dev, "Device added\n");
 		}
 	}
 
@@ -1595,9 +1595,7 @@
 	pci_release_regions(dev);
 	pci_disable_device(dev);
 
-        return retval;
-
-
+	return retval;
 }
 
 static void __devexit icom_remove(struct pci_dev *dev)
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 6443b7f..b8629d7 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -726,9 +726,10 @@
 	.cons		= PXA_CONSOLE,
 };
 
-static int serial_pxa_suspend(struct platform_device *dev, pm_message_t state)
+#ifdef CONFIG_PM
+static int serial_pxa_suspend(struct device *dev)
 {
-        struct uart_pxa_port *sport = platform_get_drvdata(dev);
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
 
         if (sport)
                 uart_suspend_port(&serial_pxa_reg, &sport->port);
@@ -736,9 +737,9 @@
         return 0;
 }
 
-static int serial_pxa_resume(struct platform_device *dev)
+static int serial_pxa_resume(struct device *dev)
 {
-        struct uart_pxa_port *sport = platform_get_drvdata(dev);
+        struct uart_pxa_port *sport = dev_get_drvdata(dev);
 
         if (sport)
                 uart_resume_port(&serial_pxa_reg, &sport->port);
@@ -746,6 +747,12 @@
         return 0;
 }
 
+static struct dev_pm_ops serial_pxa_pm_ops = {
+	.suspend	= serial_pxa_suspend,
+	.resume		= serial_pxa_resume,
+};
+#endif
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
@@ -825,11 +832,12 @@
         .probe          = serial_pxa_probe,
         .remove         = serial_pxa_remove,
 
-	.suspend	= serial_pxa_suspend,
-	.resume		= serial_pxa_resume,
 	.driver		= {
 	        .name	= "pxa2xx-uart",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &serial_pxa_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 7f5e268..2199d81 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -638,7 +638,7 @@
 	PPSR |= PPC_TXD1 | PPC_TXD3;
 }
 
-void __init sa1100_register_uart_fns(struct sa1100_port_fns *fns)
+void __devinit sa1100_register_uart_fns(struct sa1100_port_fns *fns)
 {
 	if (fns->get_mctrl)
 		sa1100_pops.get_mctrl = fns->get_mctrl;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 0f7cf4c..c50e9fb 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -221,21 +221,26 @@
 		sio_out(up, TXX9_SIBGR, 0xff | TXX9_SIBGR_BCLK_T6);
 }
 
+static struct uart_txx9_port *to_uart_txx9_port(struct uart_port *port)
+{
+	return container_of(port, struct uart_txx9_port, port);
+}
+
 static void serial_txx9_stop_tx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	sio_mask(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
 }
 
 static void serial_txx9_start_tx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	sio_set(up, TXX9_SIDICR, TXX9_SIDICR_TIE);
 }
 
 static void serial_txx9_stop_rx(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	up->port.read_status_mask &= ~TXX9_SIDISR_RDIS;
 }
 
@@ -246,7 +251,7 @@
 
 static void serial_txx9_initialize(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int tmout = 10000;
 
 	sio_out(up, TXX9_SIFCR, TXX9_SIFCR_SWRST);
@@ -414,7 +419,7 @@
 
 static unsigned int serial_txx9_tx_empty(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 	unsigned int ret;
 
@@ -427,7 +432,7 @@
 
 static unsigned int serial_txx9_get_mctrl(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int ret;
 
 	/* no modem control lines */
@@ -440,7 +445,7 @@
 
 static void serial_txx9_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	if (mctrl & TIOCM_RTS)
 		sio_mask(up, TXX9_SIFLCR, TXX9_SIFLCR_RTSSC);
@@ -450,7 +455,7 @@
 
 static void serial_txx9_break_ctl(struct uart_port *port, int break_state)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 
 	spin_lock_irqsave(&up->port.lock, flags);
@@ -494,7 +499,7 @@
 {
 	unsigned int ier;
 	unsigned char c;
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -520,7 +525,7 @@
 static void serial_txx9_put_poll_char(struct uart_port *port, unsigned char c)
 {
 	unsigned int ier;
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	/*
 	 *	First save the IER then disable the interrupts
@@ -551,7 +556,7 @@
 
 static int serial_txx9_startup(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 	int retval;
 
@@ -596,7 +601,7 @@
 
 static void serial_txx9_shutdown(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned long flags;
 
 	/*
@@ -636,7 +641,7 @@
 serial_txx9_set_termios(struct uart_port *port, struct ktermios *termios,
 		       struct ktermios *old)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	unsigned int cval, fcr = 0;
 	unsigned long flags;
 	unsigned int baud, quot;
@@ -814,19 +819,19 @@
 
 static void serial_txx9_release_port(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	serial_txx9_release_resource(up);
 }
 
 static int serial_txx9_request_port(struct uart_port *port)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	return serial_txx9_request_resource(up);
 }
 
 static void serial_txx9_config_port(struct uart_port *port, int uflags)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 	int ret;
 
 	/*
@@ -897,7 +902,7 @@
 
 static void serial_txx9_console_putchar(struct uart_port *port, int ch)
 {
-	struct uart_txx9_port *up = (struct uart_txx9_port *)port;
+	struct uart_txx9_port *up = to_uart_txx9_port(port);
 
 	wait_for_xmitr(up);
 	sio_out(up, TXX9_SITFIFO, ch);
diff --git a/drivers/sfi/sfi_core.c b/drivers/sfi/sfi_core.c
index d3b4968..b204a09 100644
--- a/drivers/sfi/sfi_core.c
+++ b/drivers/sfi/sfi_core.c
@@ -90,7 +90,11 @@
  */
 static u32 sfi_use_ioremap __read_mostly;
 
-static void __iomem *sfi_map_memory(u64 phys, u32 size)
+/*
+ * sfi_un/map_memory calls early_ioremap/iounmap which is a __init function
+ * and introduces section mismatch. So use __ref to make it calm.
+ */
+static void __iomem * __ref sfi_map_memory(u64 phys, u32 size)
 {
 	if (!phys || !size)
 		return NULL;
@@ -101,7 +105,7 @@
 		return early_ioremap(phys, size);
 }
 
-static void sfi_unmap_memory(void __iomem *virt, u32 size)
+static void __ref sfi_unmap_memory(void __iomem *virt, u32 size)
 {
 	if (!virt || !size)
 		return;
@@ -125,7 +129,7 @@
  * sfi_verify_table()
  * Sanity check table lengh, calculate checksum
  */
-static __init int sfi_verify_table(struct sfi_table_header *table)
+static int sfi_verify_table(struct sfi_table_header *table)
 {
 
 	u8 checksum = 0;
@@ -213,12 +217,17 @@
  *    the mapped virt address will be returned, and the virt space
  *    will be released by call sfi_put_table() later
  *
+ * This two cases are from two different functions with two different
+ * sections and causes section mismatch warning. So use __ref to tell
+ * modpost not to make any noise.
+ *
  * Return value:
  *	NULL:			when can't find a table matching the key
  *	ERR_PTR(error):		error value
  *	virt table address:	when a matched table is found
  */
-struct sfi_table_header *sfi_check_table(u64 pa, struct sfi_table_key *key)
+struct sfi_table_header *
+ __ref sfi_check_table(u64 pa, struct sfi_table_key *key)
 {
 	struct sfi_table_header *th;
 	void *ret = NULL;
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6d7a3f8..21a1182 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -17,7 +17,7 @@
 obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
 obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
 obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
-obj-$(CONFIG_SPI_IMX)			+= mxc_spi.o
+obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
 obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
 obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index c0f950a..958a3ff 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -532,7 +532,7 @@
 	GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0)	| \
 	GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
 	GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
-	GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+	GEN_MASK_BITS(SSP_CLK_SECOND_EDGE, SSP_CR0_MASK_SPH, 7) | \
 	GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
 	GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16)	| \
 	GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
@@ -1247,8 +1247,8 @@
 		return -EINVAL;
 	}
 	if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
-		if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
-		    && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+		if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE)
+		    && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) {
 			dev_err(chip_info->dev,
 				"Clock Phase is configured incorrectly\n");
 			return -EINVAL;
@@ -1485,7 +1485,7 @@
 		chip_info->data_size = SSP_DATA_BITS_12;
 		chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
 		chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
-		chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+		chip_info->clk_phase = SSP_CLK_SECOND_EDGE;
 		chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
 		chip_info->ctrl_len = SSP_BITS_8;
 		chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c
deleted file mode 100644
index b144723..0000000
--- a/drivers/spi/mxc_spi.c
+++ /dev/null
@@ -1,685 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 Juergen Beisert
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the
- * Free Software Foundation
- * 51 Franklin Street, Fifth Floor
- * Boston, MA  02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/completion.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/types.h>
-
-#include <mach/spi.h>
-
-#define DRIVER_NAME "spi_imx"
-
-#define MXC_CSPIRXDATA		0x00
-#define MXC_CSPITXDATA		0x04
-#define MXC_CSPICTRL		0x08
-#define MXC_CSPIINT		0x0c
-#define MXC_RESET		0x1c
-
-/* generic defines to abstract from the different register layouts */
-#define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
-#define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
-
-struct mxc_spi_config {
-	unsigned int speed_hz;
-	unsigned int bpw;
-	unsigned int mode;
-	int cs;
-};
-
-struct mxc_spi_data {
-	struct spi_bitbang bitbang;
-
-	struct completion xfer_done;
-	void *base;
-	int irq;
-	struct clk *clk;
-	unsigned long spi_clk;
-	int *chipselect;
-
-	unsigned int count;
-	void (*tx)(struct mxc_spi_data *);
-	void (*rx)(struct mxc_spi_data *);
-	void *rx_buf;
-	const void *tx_buf;
-	unsigned int txfifo; /* number of words pushed in tx FIFO */
-
-	/* SoC specific functions */
-	void (*intctrl)(struct mxc_spi_data *, int);
-	int (*config)(struct mxc_spi_data *, struct mxc_spi_config *);
-	void (*trigger)(struct mxc_spi_data *);
-	int (*rx_available)(struct mxc_spi_data *);
-};
-
-#define MXC_SPI_BUF_RX(type)						\
-static void mxc_spi_buf_rx_##type(struct mxc_spi_data *mxc_spi)		\
-{									\
-	unsigned int val = readl(mxc_spi->base + MXC_CSPIRXDATA);	\
-									\
-	if (mxc_spi->rx_buf) {						\
-		*(type *)mxc_spi->rx_buf = val;				\
-		mxc_spi->rx_buf += sizeof(type);			\
-	}								\
-}
-
-#define MXC_SPI_BUF_TX(type)						\
-static void mxc_spi_buf_tx_##type(struct mxc_spi_data *mxc_spi)		\
-{									\
-	type val = 0;							\
-									\
-	if (mxc_spi->tx_buf) {						\
-		val = *(type *)mxc_spi->tx_buf;				\
-		mxc_spi->tx_buf += sizeof(type);			\
-	}								\
-									\
-	mxc_spi->count -= sizeof(type);					\
-									\
-	writel(val, mxc_spi->base + MXC_CSPITXDATA);			\
-}
-
-MXC_SPI_BUF_RX(u8)
-MXC_SPI_BUF_TX(u8)
-MXC_SPI_BUF_RX(u16)
-MXC_SPI_BUF_TX(u16)
-MXC_SPI_BUF_RX(u32)
-MXC_SPI_BUF_TX(u32)
-
-/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
- * (which is currently not the case in this driver)
- */
-static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
-	256, 384, 512, 768, 1024};
-
-/* MX21, MX27 */
-static unsigned int mxc_spi_clkdiv_1(unsigned int fin,
-		unsigned int fspi)
-{
-	int i, max;
-
-	if (cpu_is_mx21())
-		max = 18;
-	else
-		max = 16;
-
-	for (i = 2; i < max; i++)
-		if (fspi * mxc_clkdivs[i] >= fin)
-			return i;
-
-	return max;
-}
-
-/* MX1, MX31, MX35 */
-static unsigned int mxc_spi_clkdiv_2(unsigned int fin,
-		unsigned int fspi)
-{
-	int i, div = 4;
-
-	for (i = 0; i < 7; i++) {
-		if (fspi * div >= fin)
-			return i;
-		div <<= 1;
-	}
-
-	return 7;
-}
-
-#define MX31_INTREG_TEEN	(1 << 0)
-#define MX31_INTREG_RREN	(1 << 3)
-
-#define MX31_CSPICTRL_ENABLE	(1 << 0)
-#define MX31_CSPICTRL_MASTER	(1 << 1)
-#define MX31_CSPICTRL_XCH	(1 << 2)
-#define MX31_CSPICTRL_POL	(1 << 4)
-#define MX31_CSPICTRL_PHA	(1 << 5)
-#define MX31_CSPICTRL_SSCTL	(1 << 6)
-#define MX31_CSPICTRL_SSPOL	(1 << 7)
-#define MX31_CSPICTRL_BC_SHIFT	8
-#define MX35_CSPICTRL_BL_SHIFT	20
-#define MX31_CSPICTRL_CS_SHIFT	24
-#define MX35_CSPICTRL_CS_SHIFT	12
-#define MX31_CSPICTRL_DR_SHIFT	16
-
-#define MX31_CSPISTATUS		0x14
-#define MX31_STATUS_RR		(1 << 3)
-
-/* These functions also work for the i.MX35, but be aware that
- * the i.MX35 has a slightly different register layout for bits
- * we do not use here.
- */
-static void mx31_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
-	unsigned int val = 0;
-
-	if (enable & MXC_INT_TE)
-		val |= MX31_INTREG_TEEN;
-	if (enable & MXC_INT_RR)
-		val |= MX31_INTREG_RREN;
-
-	writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx31_trigger(struct mxc_spi_data *mxc_spi)
-{
-	unsigned int reg;
-
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
-	reg |= MX31_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx31_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
-{
-	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
-
-	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
-		MX31_CSPICTRL_DR_SHIFT;
-
-	if (cpu_is_mx31())
-		reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
-	else if (cpu_is_mx35()) {
-		reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
-		reg |= MX31_CSPICTRL_SSCTL;
-	}
-
-	if (config->mode & SPI_CPHA)
-		reg |= MX31_CSPICTRL_PHA;
-	if (config->mode & SPI_CPOL)
-		reg |= MX31_CSPICTRL_POL;
-	if (config->mode & SPI_CS_HIGH)
-		reg |= MX31_CSPICTRL_SSPOL;
-	if (config->cs < 0) {
-		if (cpu_is_mx31())
-			reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
-		else if (cpu_is_mx35())
-			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
-	}
-
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
-	return 0;
-}
-
-static int mx31_rx_available(struct mxc_spi_data *mxc_spi)
-{
-	return readl(mxc_spi->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
-}
-
-#define MX27_INTREG_RR		(1 << 4)
-#define MX27_INTREG_TEEN	(1 << 9)
-#define MX27_INTREG_RREN	(1 << 13)
-
-#define MX27_CSPICTRL_POL	(1 << 5)
-#define MX27_CSPICTRL_PHA	(1 << 6)
-#define MX27_CSPICTRL_SSPOL	(1 << 8)
-#define MX27_CSPICTRL_XCH	(1 << 9)
-#define MX27_CSPICTRL_ENABLE	(1 << 10)
-#define MX27_CSPICTRL_MASTER	(1 << 11)
-#define MX27_CSPICTRL_DR_SHIFT	14
-#define MX27_CSPICTRL_CS_SHIFT	19
-
-static void mx27_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
-	unsigned int val = 0;
-
-	if (enable & MXC_INT_TE)
-		val |= MX27_INTREG_TEEN;
-	if (enable & MXC_INT_RR)
-		val |= MX27_INTREG_RREN;
-
-	writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx27_trigger(struct mxc_spi_data *mxc_spi)
-{
-	unsigned int reg;
-
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
-	reg |= MX27_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx27_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
-{
-	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
-
-	reg |= mxc_spi_clkdiv_1(mxc_spi->spi_clk, config->speed_hz) <<
-		MX27_CSPICTRL_DR_SHIFT;
-	reg |= config->bpw - 1;
-
-	if (config->mode & SPI_CPHA)
-		reg |= MX27_CSPICTRL_PHA;
-	if (config->mode & SPI_CPOL)
-		reg |= MX27_CSPICTRL_POL;
-	if (config->mode & SPI_CS_HIGH)
-		reg |= MX27_CSPICTRL_SSPOL;
-	if (config->cs < 0)
-		reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
-
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
-	return 0;
-}
-
-static int mx27_rx_available(struct mxc_spi_data *mxc_spi)
-{
-	return readl(mxc_spi->base + MXC_CSPIINT) & MX27_INTREG_RR;
-}
-
-#define MX1_INTREG_RR		(1 << 3)
-#define MX1_INTREG_TEEN		(1 << 8)
-#define MX1_INTREG_RREN		(1 << 11)
-
-#define MX1_CSPICTRL_POL	(1 << 4)
-#define MX1_CSPICTRL_PHA	(1 << 5)
-#define MX1_CSPICTRL_XCH	(1 << 8)
-#define MX1_CSPICTRL_ENABLE	(1 << 9)
-#define MX1_CSPICTRL_MASTER	(1 << 10)
-#define MX1_CSPICTRL_DR_SHIFT	13
-
-static void mx1_intctrl(struct mxc_spi_data *mxc_spi, int enable)
-{
-	unsigned int val = 0;
-
-	if (enable & MXC_INT_TE)
-		val |= MX1_INTREG_TEEN;
-	if (enable & MXC_INT_RR)
-		val |= MX1_INTREG_RREN;
-
-	writel(val, mxc_spi->base + MXC_CSPIINT);
-}
-
-static void mx1_trigger(struct mxc_spi_data *mxc_spi)
-{
-	unsigned int reg;
-
-	reg = readl(mxc_spi->base + MXC_CSPICTRL);
-	reg |= MX1_CSPICTRL_XCH;
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-}
-
-static int mx1_config(struct mxc_spi_data *mxc_spi,
-		struct mxc_spi_config *config)
-{
-	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
-
-	reg |= mxc_spi_clkdiv_2(mxc_spi->spi_clk, config->speed_hz) <<
-		MX1_CSPICTRL_DR_SHIFT;
-	reg |= config->bpw - 1;
-
-	if (config->mode & SPI_CPHA)
-		reg |= MX1_CSPICTRL_PHA;
-	if (config->mode & SPI_CPOL)
-		reg |= MX1_CSPICTRL_POL;
-
-	writel(reg, mxc_spi->base + MXC_CSPICTRL);
-
-	return 0;
-}
-
-static int mx1_rx_available(struct mxc_spi_data *mxc_spi)
-{
-	return readl(mxc_spi->base + MXC_CSPIINT) & MX1_INTREG_RR;
-}
-
-static void mxc_spi_chipselect(struct spi_device *spi, int is_active)
-{
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-	unsigned int cs = 0;
-	int gpio = mxc_spi->chipselect[spi->chip_select];
-	struct mxc_spi_config config;
-
-	if (spi->mode & SPI_CS_HIGH)
-		cs = 1;
-
-	if (is_active == BITBANG_CS_INACTIVE) {
-		if (gpio >= 0)
-			gpio_set_value(gpio, !cs);
-		return;
-	}
-
-	config.bpw = spi->bits_per_word;
-	config.speed_hz = spi->max_speed_hz;
-	config.mode = spi->mode;
-	config.cs = mxc_spi->chipselect[spi->chip_select];
-
-	mxc_spi->config(mxc_spi, &config);
-
-	/* Initialize the functions for transfer */
-	if (config.bpw <= 8) {
-		mxc_spi->rx = mxc_spi_buf_rx_u8;
-		mxc_spi->tx = mxc_spi_buf_tx_u8;
-	} else if (config.bpw <= 16) {
-		mxc_spi->rx = mxc_spi_buf_rx_u16;
-		mxc_spi->tx = mxc_spi_buf_tx_u16;
-	} else if (config.bpw <= 32) {
-		mxc_spi->rx = mxc_spi_buf_rx_u32;
-		mxc_spi->tx = mxc_spi_buf_tx_u32;
-	} else
-		BUG();
-
-	if (gpio >= 0)
-		gpio_set_value(gpio, cs);
-
-	return;
-}
-
-static void mxc_spi_push(struct mxc_spi_data *mxc_spi)
-{
-	while (mxc_spi->txfifo < 8) {
-		if (!mxc_spi->count)
-			break;
-		mxc_spi->tx(mxc_spi);
-		mxc_spi->txfifo++;
-	}
-
-	mxc_spi->trigger(mxc_spi);
-}
-
-static irqreturn_t mxc_spi_isr(int irq, void *dev_id)
-{
-	struct mxc_spi_data *mxc_spi = dev_id;
-
-	while (mxc_spi->rx_available(mxc_spi)) {
-		mxc_spi->rx(mxc_spi);
-		mxc_spi->txfifo--;
-	}
-
-	if (mxc_spi->count) {
-		mxc_spi_push(mxc_spi);
-		return IRQ_HANDLED;
-	}
-
-	if (mxc_spi->txfifo) {
-		/* No data left to push, but still waiting for rx data,
-		 * enable receive data available interrupt.
-		 */
-		mxc_spi->intctrl(mxc_spi, MXC_INT_RR);
-		return IRQ_HANDLED;
-	}
-
-	mxc_spi->intctrl(mxc_spi, 0);
-	complete(&mxc_spi->xfer_done);
-
-	return IRQ_HANDLED;
-}
-
-static int mxc_spi_setupxfer(struct spi_device *spi,
-				 struct spi_transfer *t)
-{
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-	struct mxc_spi_config config;
-
-	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
-	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
-	config.mode = spi->mode;
-
-	mxc_spi->config(mxc_spi, &config);
-
-	return 0;
-}
-
-static int mxc_spi_transfer(struct spi_device *spi,
-				struct spi_transfer *transfer)
-{
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(spi->master);
-
-	mxc_spi->tx_buf = transfer->tx_buf;
-	mxc_spi->rx_buf = transfer->rx_buf;
-	mxc_spi->count = transfer->len;
-	mxc_spi->txfifo = 0;
-
-	init_completion(&mxc_spi->xfer_done);
-
-	mxc_spi_push(mxc_spi);
-
-	mxc_spi->intctrl(mxc_spi, MXC_INT_TE);
-
-	wait_for_completion(&mxc_spi->xfer_done);
-
-	return transfer->len;
-}
-
-static int mxc_spi_setup(struct spi_device *spi)
-{
-	if (!spi->bits_per_word)
-		spi->bits_per_word = 8;
-
-	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
-		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
-
-	mxc_spi_chipselect(spi, BITBANG_CS_INACTIVE);
-
-	return 0;
-}
-
-static void mxc_spi_cleanup(struct spi_device *spi)
-{
-}
-
-static int __init mxc_spi_probe(struct platform_device *pdev)
-{
-	struct spi_imx_master *mxc_platform_info;
-	struct spi_master *master;
-	struct mxc_spi_data *mxc_spi;
-	struct resource *res;
-	int i, ret;
-
-	mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
-	if (!mxc_platform_info) {
-		dev_err(&pdev->dev, "can't get the platform data\n");
-		return -EINVAL;
-	}
-
-	master = spi_alloc_master(&pdev->dev, sizeof(struct mxc_spi_data));
-	if (!master)
-		return -ENOMEM;
-
-	platform_set_drvdata(pdev, master);
-
-	master->bus_num = pdev->id;
-	master->num_chipselect = mxc_platform_info->num_chipselect;
-
-	mxc_spi = spi_master_get_devdata(master);
-	mxc_spi->bitbang.master = spi_master_get(master);
-	mxc_spi->chipselect = mxc_platform_info->chipselect;
-
-	for (i = 0; i < master->num_chipselect; i++) {
-		if (mxc_spi->chipselect[i] < 0)
-			continue;
-		ret = gpio_request(mxc_spi->chipselect[i], DRIVER_NAME);
-		if (ret) {
-			i--;
-			while (i > 0)
-				if (mxc_spi->chipselect[i] >= 0)
-					gpio_free(mxc_spi->chipselect[i--]);
-			dev_err(&pdev->dev, "can't get cs gpios");
-			goto out_master_put;
-		}
-		gpio_direction_output(mxc_spi->chipselect[i], 1);
-	}
-
-	mxc_spi->bitbang.chipselect = mxc_spi_chipselect;
-	mxc_spi->bitbang.setup_transfer = mxc_spi_setupxfer;
-	mxc_spi->bitbang.txrx_bufs = mxc_spi_transfer;
-	mxc_spi->bitbang.master->setup = mxc_spi_setup;
-	mxc_spi->bitbang.master->cleanup = mxc_spi_cleanup;
-
-	init_completion(&mxc_spi->xfer_done);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "can't get platform resource\n");
-		ret = -ENOMEM;
-		goto out_gpio_free;
-	}
-
-	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
-		dev_err(&pdev->dev, "request_mem_region failed\n");
-		ret = -EBUSY;
-		goto out_gpio_free;
-	}
-
-	mxc_spi->base = ioremap(res->start, resource_size(res));
-	if (!mxc_spi->base) {
-		ret = -EINVAL;
-		goto out_release_mem;
-	}
-
-	mxc_spi->irq = platform_get_irq(pdev, 0);
-	if (!mxc_spi->irq) {
-		ret = -EINVAL;
-		goto out_iounmap;
-	}
-
-	ret = request_irq(mxc_spi->irq, mxc_spi_isr, 0, DRIVER_NAME, mxc_spi);
-	if (ret) {
-		dev_err(&pdev->dev, "can't get irq%d: %d\n", mxc_spi->irq, ret);
-		goto out_iounmap;
-	}
-
-	if (cpu_is_mx31() || cpu_is_mx35()) {
-		mxc_spi->intctrl = mx31_intctrl;
-		mxc_spi->config = mx31_config;
-		mxc_spi->trigger = mx31_trigger;
-		mxc_spi->rx_available = mx31_rx_available;
-	} else  if (cpu_is_mx27() || cpu_is_mx21()) {
-		mxc_spi->intctrl = mx27_intctrl;
-		mxc_spi->config = mx27_config;
-		mxc_spi->trigger = mx27_trigger;
-		mxc_spi->rx_available = mx27_rx_available;
-	} else if (cpu_is_mx1()) {
-		mxc_spi->intctrl = mx1_intctrl;
-		mxc_spi->config = mx1_config;
-		mxc_spi->trigger = mx1_trigger;
-		mxc_spi->rx_available = mx1_rx_available;
-	} else
-		BUG();
-
-	mxc_spi->clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(mxc_spi->clk)) {
-		dev_err(&pdev->dev, "unable to get clock\n");
-		ret = PTR_ERR(mxc_spi->clk);
-		goto out_free_irq;
-	}
-
-	clk_enable(mxc_spi->clk);
-	mxc_spi->spi_clk = clk_get_rate(mxc_spi->clk);
-
-	if (!cpu_is_mx31() || !cpu_is_mx35())
-		writel(1, mxc_spi->base + MXC_RESET);
-
-	mxc_spi->intctrl(mxc_spi, 0);
-
-	ret = spi_bitbang_start(&mxc_spi->bitbang);
-	if (ret) {
-		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
-		goto out_clk_put;
-	}
-
-	dev_info(&pdev->dev, "probed\n");
-
-	return ret;
-
-out_clk_put:
-	clk_disable(mxc_spi->clk);
-	clk_put(mxc_spi->clk);
-out_free_irq:
-	free_irq(mxc_spi->irq, mxc_spi);
-out_iounmap:
-	iounmap(mxc_spi->base);
-out_release_mem:
-	release_mem_region(res->start, resource_size(res));
-out_gpio_free:
-	for (i = 0; i < master->num_chipselect; i++)
-		if (mxc_spi->chipselect[i] >= 0)
-			gpio_free(mxc_spi->chipselect[i]);
-out_master_put:
-	spi_master_put(master);
-	kfree(master);
-	platform_set_drvdata(pdev, NULL);
-	return ret;
-}
-
-static int __exit mxc_spi_remove(struct platform_device *pdev)
-{
-	struct spi_master *master = platform_get_drvdata(pdev);
-	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	struct mxc_spi_data *mxc_spi = spi_master_get_devdata(master);
-	int i;
-
-	spi_bitbang_stop(&mxc_spi->bitbang);
-
-	writel(0, mxc_spi->base + MXC_CSPICTRL);
-	clk_disable(mxc_spi->clk);
-	clk_put(mxc_spi->clk);
-	free_irq(mxc_spi->irq, mxc_spi);
-	iounmap(mxc_spi->base);
-
-	for (i = 0; i < master->num_chipselect; i++)
-		if (mxc_spi->chipselect[i] >= 0)
-			gpio_free(mxc_spi->chipselect[i]);
-
-	spi_master_put(master);
-
-	release_mem_region(res->start, resource_size(res));
-
-	platform_set_drvdata(pdev, NULL);
-
-	return 0;
-}
-
-static struct platform_driver mxc_spi_driver = {
-	.driver = {
-		   .name = DRIVER_NAME,
-		   .owner = THIS_MODULE,
-		   },
-	.probe = mxc_spi_probe,
-	.remove = __exit_p(mxc_spi_remove),
-};
-
-static int __init mxc_spi_init(void)
-{
-	return platform_driver_register(&mxc_spi_driver);
-}
-
-static void __exit mxc_spi_exit(void)
-{
-	platform_driver_unregister(&mxc_spi_driver);
-}
-
-module_init(mxc_spi_init);
-module_exit(mxc_spi_exit);
-
-MODULE_DESCRIPTION("SPI Master Controller driver");
-MODULE_AUTHOR("Sascha Hauer, Pengutronix");
-MODULE_LICENSE("GPL");
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 31dd56f..c8c2b69 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1668,10 +1668,9 @@
 }
 
 #ifdef CONFIG_PM
-
-static int pxa2xx_spi_suspend(struct platform_device *pdev, pm_message_t state)
+static int pxa2xx_spi_suspend(struct device *dev)
 {
-	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct driver_data *drv_data = dev_get_drvdata(dev);
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
@@ -1684,9 +1683,9 @@
 	return 0;
 }
 
-static int pxa2xx_spi_resume(struct platform_device *pdev)
+static int pxa2xx_spi_resume(struct device *dev)
 {
-	struct driver_data *drv_data = platform_get_drvdata(pdev);
+	struct driver_data *drv_data = dev_get_drvdata(dev);
 	struct ssp_device *ssp = drv_data->ssp;
 	int status = 0;
 
@@ -1703,26 +1702,29 @@
 	/* Start the queue running */
 	status = start_queue(drv_data);
 	if (status != 0) {
-		dev_err(&pdev->dev, "problem starting queue (%d)\n", status);
+		dev_err(dev, "problem starting queue (%d)\n", status);
 		return status;
 	}
 
 	return 0;
 }
-#else
-#define pxa2xx_spi_suspend NULL
-#define pxa2xx_spi_resume NULL
-#endif /* CONFIG_PM */
+
+static struct dev_pm_ops pxa2xx_spi_pm_ops = {
+	.suspend	= pxa2xx_spi_suspend,
+	.resume		= pxa2xx_spi_resume,
+};
+#endif
 
 static struct platform_driver driver = {
 	.driver = {
-		.name = "pxa2xx-spi",
-		.owner = THIS_MODULE,
+		.name	= "pxa2xx-spi",
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxa2xx_spi_pm_ops,
+#endif
 	},
 	.remove = pxa2xx_spi_remove,
 	.shutdown = pxa2xx_spi_shutdown,
-	.suspend = pxa2xx_spi_suspend,
-	.resume = pxa2xx_spi_resume,
 };
 
 static int __init pxa2xx_spi_init(void)
diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
new file mode 100644
index 0000000..89c22ef
--- /dev/null
+++ b/drivers/spi/spi_imx.c
@@ -0,0 +1,680 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 Juergen Beisert
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation
+ * 51 Franklin Street, Fifth Floor
+ * Boston, MA  02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include <linux/types.h>
+
+#include <mach/spi.h>
+
+#define DRIVER_NAME "spi_imx"
+
+#define MXC_CSPIRXDATA		0x00
+#define MXC_CSPITXDATA		0x04
+#define MXC_CSPICTRL		0x08
+#define MXC_CSPIINT		0x0c
+#define MXC_RESET		0x1c
+
+/* generic defines to abstract from the different register layouts */
+#define MXC_INT_RR	(1 << 0) /* Receive data ready interrupt */
+#define MXC_INT_TE	(1 << 1) /* Transmit FIFO empty interrupt */
+
+struct spi_imx_config {
+	unsigned int speed_hz;
+	unsigned int bpw;
+	unsigned int mode;
+	int cs;
+};
+
+struct spi_imx_data {
+	struct spi_bitbang bitbang;
+
+	struct completion xfer_done;
+	void *base;
+	int irq;
+	struct clk *clk;
+	unsigned long spi_clk;
+	int *chipselect;
+
+	unsigned int count;
+	void (*tx)(struct spi_imx_data *);
+	void (*rx)(struct spi_imx_data *);
+	void *rx_buf;
+	const void *tx_buf;
+	unsigned int txfifo; /* number of words pushed in tx FIFO */
+
+	/* SoC specific functions */
+	void (*intctrl)(struct spi_imx_data *, int);
+	int (*config)(struct spi_imx_data *, struct spi_imx_config *);
+	void (*trigger)(struct spi_imx_data *);
+	int (*rx_available)(struct spi_imx_data *);
+};
+
+#define MXC_SPI_BUF_RX(type)						\
+static void spi_imx_buf_rx_##type(struct spi_imx_data *spi_imx)		\
+{									\
+	unsigned int val = readl(spi_imx->base + MXC_CSPIRXDATA);	\
+									\
+	if (spi_imx->rx_buf) {						\
+		*(type *)spi_imx->rx_buf = val;				\
+		spi_imx->rx_buf += sizeof(type);			\
+	}								\
+}
+
+#define MXC_SPI_BUF_TX(type)						\
+static void spi_imx_buf_tx_##type(struct spi_imx_data *spi_imx)		\
+{									\
+	type val = 0;							\
+									\
+	if (spi_imx->tx_buf) {						\
+		val = *(type *)spi_imx->tx_buf;				\
+		spi_imx->tx_buf += sizeof(type);			\
+	}								\
+									\
+	spi_imx->count -= sizeof(type);					\
+									\
+	writel(val, spi_imx->base + MXC_CSPITXDATA);			\
+}
+
+MXC_SPI_BUF_RX(u8)
+MXC_SPI_BUF_TX(u8)
+MXC_SPI_BUF_RX(u16)
+MXC_SPI_BUF_TX(u16)
+MXC_SPI_BUF_RX(u32)
+MXC_SPI_BUF_TX(u32)
+
+/* First entry is reserved, second entry is valid only if SDHC_SPIEN is set
+ * (which is currently not the case in this driver)
+ */
+static int mxc_clkdivs[] = {0, 3, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128, 192,
+	256, 384, 512, 768, 1024};
+
+/* MX21, MX27 */
+static unsigned int spi_imx_clkdiv_1(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, max;
+
+	if (cpu_is_mx21())
+		max = 18;
+	else
+		max = 16;
+
+	for (i = 2; i < max; i++)
+		if (fspi * mxc_clkdivs[i] >= fin)
+			return i;
+
+	return max;
+}
+
+/* MX1, MX31, MX35 */
+static unsigned int spi_imx_clkdiv_2(unsigned int fin,
+		unsigned int fspi)
+{
+	int i, div = 4;
+
+	for (i = 0; i < 7; i++) {
+		if (fspi * div >= fin)
+			return i;
+		div <<= 1;
+	}
+
+	return 7;
+}
+
+#define MX31_INTREG_TEEN	(1 << 0)
+#define MX31_INTREG_RREN	(1 << 3)
+
+#define MX31_CSPICTRL_ENABLE	(1 << 0)
+#define MX31_CSPICTRL_MASTER	(1 << 1)
+#define MX31_CSPICTRL_XCH	(1 << 2)
+#define MX31_CSPICTRL_POL	(1 << 4)
+#define MX31_CSPICTRL_PHA	(1 << 5)
+#define MX31_CSPICTRL_SSCTL	(1 << 6)
+#define MX31_CSPICTRL_SSPOL	(1 << 7)
+#define MX31_CSPICTRL_BC_SHIFT	8
+#define MX35_CSPICTRL_BL_SHIFT	20
+#define MX31_CSPICTRL_CS_SHIFT	24
+#define MX35_CSPICTRL_CS_SHIFT	12
+#define MX31_CSPICTRL_DR_SHIFT	16
+
+#define MX31_CSPISTATUS		0x14
+#define MX31_STATUS_RR		(1 << 3)
+
+/* These functions also work for the i.MX35, but be aware that
+ * the i.MX35 has a slightly different register layout for bits
+ * we do not use here.
+ */
+static void mx31_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX31_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX31_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx31_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX31_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx31_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX31_CSPICTRL_ENABLE | MX31_CSPICTRL_MASTER;
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX31_CSPICTRL_DR_SHIFT;
+
+	if (cpu_is_mx31())
+		reg |= (config->bpw - 1) << MX31_CSPICTRL_BC_SHIFT;
+	else if (cpu_is_mx35()) {
+		reg |= (config->bpw - 1) << MX35_CSPICTRL_BL_SHIFT;
+		reg |= MX31_CSPICTRL_SSCTL;
+	}
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX31_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX31_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX31_CSPICTRL_SSPOL;
+	if (config->cs < 0) {
+		if (cpu_is_mx31())
+			reg |= (config->cs + 32) << MX31_CSPICTRL_CS_SHIFT;
+		else if (cpu_is_mx35())
+			reg |= (config->cs + 32) << MX35_CSPICTRL_CS_SHIFT;
+	}
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx31_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MX31_CSPISTATUS) & MX31_STATUS_RR;
+}
+
+#define MX27_INTREG_RR		(1 << 4)
+#define MX27_INTREG_TEEN	(1 << 9)
+#define MX27_INTREG_RREN	(1 << 13)
+
+#define MX27_CSPICTRL_POL	(1 << 5)
+#define MX27_CSPICTRL_PHA	(1 << 6)
+#define MX27_CSPICTRL_SSPOL	(1 << 8)
+#define MX27_CSPICTRL_XCH	(1 << 9)
+#define MX27_CSPICTRL_ENABLE	(1 << 10)
+#define MX27_CSPICTRL_MASTER	(1 << 11)
+#define MX27_CSPICTRL_DR_SHIFT	14
+#define MX27_CSPICTRL_CS_SHIFT	19
+
+static void mx27_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX27_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX27_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx27_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX27_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx27_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX27_CSPICTRL_ENABLE | MX27_CSPICTRL_MASTER;
+
+	reg |= spi_imx_clkdiv_1(spi_imx->spi_clk, config->speed_hz) <<
+		MX27_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX27_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX27_CSPICTRL_POL;
+	if (config->mode & SPI_CS_HIGH)
+		reg |= MX27_CSPICTRL_SSPOL;
+	if (config->cs < 0)
+		reg |= (config->cs + 32) << MX27_CSPICTRL_CS_SHIFT;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx27_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MXC_CSPIINT) & MX27_INTREG_RR;
+}
+
+#define MX1_INTREG_RR		(1 << 3)
+#define MX1_INTREG_TEEN		(1 << 8)
+#define MX1_INTREG_RREN		(1 << 11)
+
+#define MX1_CSPICTRL_POL	(1 << 4)
+#define MX1_CSPICTRL_PHA	(1 << 5)
+#define MX1_CSPICTRL_XCH	(1 << 8)
+#define MX1_CSPICTRL_ENABLE	(1 << 9)
+#define MX1_CSPICTRL_MASTER	(1 << 10)
+#define MX1_CSPICTRL_DR_SHIFT	13
+
+static void mx1_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+	unsigned int val = 0;
+
+	if (enable & MXC_INT_TE)
+		val |= MX1_INTREG_TEEN;
+	if (enable & MXC_INT_RR)
+		val |= MX1_INTREG_RREN;
+
+	writel(val, spi_imx->base + MXC_CSPIINT);
+}
+
+static void mx1_trigger(struct spi_imx_data *spi_imx)
+{
+	unsigned int reg;
+
+	reg = readl(spi_imx->base + MXC_CSPICTRL);
+	reg |= MX1_CSPICTRL_XCH;
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+}
+
+static int mx1_config(struct spi_imx_data *spi_imx,
+		struct spi_imx_config *config)
+{
+	unsigned int reg = MX1_CSPICTRL_ENABLE | MX1_CSPICTRL_MASTER;
+
+	reg |= spi_imx_clkdiv_2(spi_imx->spi_clk, config->speed_hz) <<
+		MX1_CSPICTRL_DR_SHIFT;
+	reg |= config->bpw - 1;
+
+	if (config->mode & SPI_CPHA)
+		reg |= MX1_CSPICTRL_PHA;
+	if (config->mode & SPI_CPOL)
+		reg |= MX1_CSPICTRL_POL;
+
+	writel(reg, spi_imx->base + MXC_CSPICTRL);
+
+	return 0;
+}
+
+static int mx1_rx_available(struct spi_imx_data *spi_imx)
+{
+	return readl(spi_imx->base + MXC_CSPIINT) & MX1_INTREG_RR;
+}
+
+static void spi_imx_chipselect(struct spi_device *spi, int is_active)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+	int active = is_active != BITBANG_CS_INACTIVE;
+	int dev_is_lowactive = !(spi->mode & SPI_CS_HIGH);
+
+	if (gpio < 0)
+		return;
+
+	gpio_set_value(gpio, dev_is_lowactive ^ active);
+}
+
+static void spi_imx_push(struct spi_imx_data *spi_imx)
+{
+	while (spi_imx->txfifo < 8) {
+		if (!spi_imx->count)
+			break;
+		spi_imx->tx(spi_imx);
+		spi_imx->txfifo++;
+	}
+
+	spi_imx->trigger(spi_imx);
+}
+
+static irqreturn_t spi_imx_isr(int irq, void *dev_id)
+{
+	struct spi_imx_data *spi_imx = dev_id;
+
+	while (spi_imx->rx_available(spi_imx)) {
+		spi_imx->rx(spi_imx);
+		spi_imx->txfifo--;
+	}
+
+	if (spi_imx->count) {
+		spi_imx_push(spi_imx);
+		return IRQ_HANDLED;
+	}
+
+	if (spi_imx->txfifo) {
+		/* No data left to push, but still waiting for rx data,
+		 * enable receive data available interrupt.
+		 */
+		spi_imx->intctrl(spi_imx, MXC_INT_RR);
+		return IRQ_HANDLED;
+	}
+
+	spi_imx->intctrl(spi_imx, 0);
+	complete(&spi_imx->xfer_done);
+
+	return IRQ_HANDLED;
+}
+
+static int spi_imx_setupxfer(struct spi_device *spi,
+				 struct spi_transfer *t)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	struct spi_imx_config config;
+
+	config.bpw = t ? t->bits_per_word : spi->bits_per_word;
+	config.speed_hz  = t ? t->speed_hz : spi->max_speed_hz;
+	config.mode = spi->mode;
+	config.cs = spi_imx->chipselect[spi->chip_select];
+
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+	if (!config.bpw)
+		config.bpw = spi->bits_per_word;
+	if (!config.speed_hz)
+		config.speed_hz = spi->max_speed_hz;
+
+	/* Initialize the functions for transfer */
+	if (config.bpw <= 8) {
+		spi_imx->rx = spi_imx_buf_rx_u8;
+		spi_imx->tx = spi_imx_buf_tx_u8;
+	} else if (config.bpw <= 16) {
+		spi_imx->rx = spi_imx_buf_rx_u16;
+		spi_imx->tx = spi_imx_buf_tx_u16;
+	} else if (config.bpw <= 32) {
+		spi_imx->rx = spi_imx_buf_rx_u32;
+		spi_imx->tx = spi_imx_buf_tx_u32;
+	} else
+		BUG();
+
+	spi_imx->config(spi_imx, &config);
+
+	return 0;
+}
+
+static int spi_imx_transfer(struct spi_device *spi,
+				struct spi_transfer *transfer)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+
+	spi_imx->tx_buf = transfer->tx_buf;
+	spi_imx->rx_buf = transfer->rx_buf;
+	spi_imx->count = transfer->len;
+	spi_imx->txfifo = 0;
+
+	init_completion(&spi_imx->xfer_done);
+
+	spi_imx_push(spi_imx);
+
+	spi_imx->intctrl(spi_imx, MXC_INT_TE);
+
+	wait_for_completion(&spi_imx->xfer_done);
+
+	return transfer->len;
+}
+
+static int spi_imx_setup(struct spi_device *spi)
+{
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+
+	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
+		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
+
+	if (gpio >= 0)
+		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+
+	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
+
+	return 0;
+}
+
+static void spi_imx_cleanup(struct spi_device *spi)
+{
+}
+
+static int __init spi_imx_probe(struct platform_device *pdev)
+{
+	struct spi_imx_master *mxc_platform_info;
+	struct spi_master *master;
+	struct spi_imx_data *spi_imx;
+	struct resource *res;
+	int i, ret;
+
+	mxc_platform_info = (struct spi_imx_master *)pdev->dev.platform_data;
+	if (!mxc_platform_info) {
+		dev_err(&pdev->dev, "can't get the platform data\n");
+		return -EINVAL;
+	}
+
+	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_imx_data));
+	if (!master)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, master);
+
+	master->bus_num = pdev->id;
+	master->num_chipselect = mxc_platform_info->num_chipselect;
+
+	spi_imx = spi_master_get_devdata(master);
+	spi_imx->bitbang.master = spi_master_get(master);
+	spi_imx->chipselect = mxc_platform_info->chipselect;
+
+	for (i = 0; i < master->num_chipselect; i++) {
+		if (spi_imx->chipselect[i] < 0)
+			continue;
+		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
+		if (ret) {
+			i--;
+			while (i > 0)
+				if (spi_imx->chipselect[i] >= 0)
+					gpio_free(spi_imx->chipselect[i--]);
+			dev_err(&pdev->dev, "can't get cs gpios");
+			goto out_master_put;
+		}
+	}
+
+	spi_imx->bitbang.chipselect = spi_imx_chipselect;
+	spi_imx->bitbang.setup_transfer = spi_imx_setupxfer;
+	spi_imx->bitbang.txrx_bufs = spi_imx_transfer;
+	spi_imx->bitbang.master->setup = spi_imx_setup;
+	spi_imx->bitbang.master->cleanup = spi_imx_cleanup;
+	spi_imx->bitbang.master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
+
+	init_completion(&spi_imx->xfer_done);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "can't get platform resource\n");
+		ret = -ENOMEM;
+		goto out_gpio_free;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+		dev_err(&pdev->dev, "request_mem_region failed\n");
+		ret = -EBUSY;
+		goto out_gpio_free;
+	}
+
+	spi_imx->base = ioremap(res->start, resource_size(res));
+	if (!spi_imx->base) {
+		ret = -EINVAL;
+		goto out_release_mem;
+	}
+
+	spi_imx->irq = platform_get_irq(pdev, 0);
+	if (!spi_imx->irq) {
+		ret = -EINVAL;
+		goto out_iounmap;
+	}
+
+	ret = request_irq(spi_imx->irq, spi_imx_isr, 0, DRIVER_NAME, spi_imx);
+	if (ret) {
+		dev_err(&pdev->dev, "can't get irq%d: %d\n", spi_imx->irq, ret);
+		goto out_iounmap;
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35()) {
+		spi_imx->intctrl = mx31_intctrl;
+		spi_imx->config = mx31_config;
+		spi_imx->trigger = mx31_trigger;
+		spi_imx->rx_available = mx31_rx_available;
+	} else  if (cpu_is_mx27() || cpu_is_mx21()) {
+		spi_imx->intctrl = mx27_intctrl;
+		spi_imx->config = mx27_config;
+		spi_imx->trigger = mx27_trigger;
+		spi_imx->rx_available = mx27_rx_available;
+	} else if (cpu_is_mx1()) {
+		spi_imx->intctrl = mx1_intctrl;
+		spi_imx->config = mx1_config;
+		spi_imx->trigger = mx1_trigger;
+		spi_imx->rx_available = mx1_rx_available;
+	} else
+		BUG();
+
+	spi_imx->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(spi_imx->clk)) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		ret = PTR_ERR(spi_imx->clk);
+		goto out_free_irq;
+	}
+
+	clk_enable(spi_imx->clk);
+	spi_imx->spi_clk = clk_get_rate(spi_imx->clk);
+
+	if (!cpu_is_mx31() || !cpu_is_mx35())
+		writel(1, spi_imx->base + MXC_RESET);
+
+	spi_imx->intctrl(spi_imx, 0);
+
+	ret = spi_bitbang_start(&spi_imx->bitbang);
+	if (ret) {
+		dev_err(&pdev->dev, "bitbang start failed with %d\n", ret);
+		goto out_clk_put;
+	}
+
+	dev_info(&pdev->dev, "probed\n");
+
+	return ret;
+
+out_clk_put:
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
+out_free_irq:
+	free_irq(spi_imx->irq, spi_imx);
+out_iounmap:
+	iounmap(spi_imx->base);
+out_release_mem:
+	release_mem_region(res->start, resource_size(res));
+out_gpio_free:
+	for (i = 0; i < master->num_chipselect; i++)
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
+out_master_put:
+	spi_master_put(master);
+	kfree(master);
+	platform_set_drvdata(pdev, NULL);
+	return ret;
+}
+
+static int __exit spi_imx_remove(struct platform_device *pdev)
+{
+	struct spi_master *master = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(master);
+	int i;
+
+	spi_bitbang_stop(&spi_imx->bitbang);
+
+	writel(0, spi_imx->base + MXC_CSPICTRL);
+	clk_disable(spi_imx->clk);
+	clk_put(spi_imx->clk);
+	free_irq(spi_imx->irq, spi_imx);
+	iounmap(spi_imx->base);
+
+	for (i = 0; i < master->num_chipselect; i++)
+		if (spi_imx->chipselect[i] >= 0)
+			gpio_free(spi_imx->chipselect[i]);
+
+	spi_master_put(master);
+
+	release_mem_region(res->start, resource_size(res));
+
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static struct platform_driver spi_imx_driver = {
+	.driver = {
+		   .name = DRIVER_NAME,
+		   .owner = THIS_MODULE,
+		   },
+	.probe = spi_imx_probe,
+	.remove = __exit_p(spi_imx_remove),
+};
+
+static int __init spi_imx_init(void)
+{
+	return platform_driver_register(&spi_imx_driver);
+}
+
+static void __exit spi_imx_exit(void)
+{
+	platform_driver_unregister(&spi_imx_driver);
+}
+
+module_init(spi_imx_init);
+module_exit(spi_imx_exit);
+
+MODULE_DESCRIPTION("SPI Master Controller driver");
+MODULE_AUTHOR("Sascha Hauer, Pengutronix");
+MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index f921bd1..5d23983 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -537,7 +537,7 @@
 	return status;
 }
 
-static struct file_operations spidev_fops = {
+static const struct file_operations spidev_fops = {
 	.owner =	THIS_MODULE,
 	/* REVISIT switch to aio primitives, so that userspace
 	 * gets more complete API coverage.  It'll simplify things
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 538c570..f1dcd79 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -551,13 +551,13 @@
 	might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
 
 	/* Enable interrupts for this device. */
-	if (bus->host_pci &&
-	    ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
+	if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) {
 		u32 coremask;
 
 		/* Calculate the "coremask" for the device. */
 		coremask = (1 << dev->core_index);
 
+		SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI);
 		err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp);
 		if (err)
 			goto out;
diff --git a/drivers/staging/dst/dcore.c b/drivers/staging/dst/dcore.c
index ee16010..c24e4e0 100644
--- a/drivers/staging/dst/dcore.c
+++ b/drivers/staging/dst/dcore.c
@@ -102,7 +102,7 @@
 	struct dst_node *n = q->queuedata;
 	int err = -EIO;
 
-	if (bio_empty_barrier(bio) && !q->prepare_discard_fn) {
+	if (bio_empty_barrier(bio) && !blk_queue_discard(q)) {
 		/*
 		 * This is a dirty^Wnice hack, but if we complete this
 		 * operation with -EOPNOTSUPP like intended, XFS
diff --git a/drivers/staging/iio/light/tsl2561.c b/drivers/staging/iio/light/tsl2561.c
index ea8a5ef..fc2107f 100644
--- a/drivers/staging/iio/light/tsl2561.c
+++ b/drivers/staging/iio/light/tsl2561.c
@@ -239,10 +239,6 @@
 	return tsl2561_powerdown(client);
 }
 
-static unsigned short normal_i2c[] = { 0x29, 0x39, 0x49, I2C_CLIENT_END };
-
-I2C_CLIENT_INSMOD;
-
 static const struct i2c_device_id tsl2561_id[] = {
 	{ "tsl2561", 0 },
 	{ }
diff --git a/drivers/staging/rtl8187se/Kconfig b/drivers/staging/rtl8187se/Kconfig
index 236e427..faf6c60 100644
--- a/drivers/staging/rtl8187se/Kconfig
+++ b/drivers/staging/rtl8187se/Kconfig
@@ -1,6 +1,7 @@
 config RTL8187SE
 	tristate "RealTek RTL8187SE Wireless LAN NIC driver"
 	depends on PCI
-	depends on WIRELESS_EXT
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	default N
 	---help---
diff --git a/drivers/staging/rtl8192e/Kconfig b/drivers/staging/rtl8192e/Kconfig
index 3100aa5..5c077b9 100644
--- a/drivers/staging/rtl8192e/Kconfig
+++ b/drivers/staging/rtl8192e/Kconfig
@@ -1,6 +1,7 @@
 config RTL8192E
 	tristate "RealTek RTL8192E Wireless LAN NIC driver"
 	depends on PCI
-	depends on WIRELESS_EXT
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	default N
 	---help---
diff --git a/drivers/staging/vt6655/Kconfig b/drivers/staging/vt6655/Kconfig
index 9bec95a..825bbc4 100644
--- a/drivers/staging/vt6655/Kconfig
+++ b/drivers/staging/vt6655/Kconfig
@@ -1,6 +1,8 @@
 config VT6655
    tristate "VIA Technologies VT6655 support"
-   depends on WIRELESS_EXT && PCI
+   depends on PCI
+   select WIRELESS_EXT
+   select WEXT_PRIV
    ---help---
    This is a vendor-written driver for VIA VT6655.
 
diff --git a/drivers/staging/vt6656/Kconfig b/drivers/staging/vt6656/Kconfig
index 3165f2c..87bcd26 100644
--- a/drivers/staging/vt6656/Kconfig
+++ b/drivers/staging/vt6656/Kconfig
@@ -1,6 +1,8 @@
 config VT6656
 	tristate "VIA Technologies VT6656 support"
-	depends on WIRELESS_EXT && USB
+	depends on USB
+	select WIRELESS_EXT
+	select WEXT_PRIV
 	---help---
 	This is a vendor-written driver for VIA VT6656.
 
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 03efb06..a9d7070 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -658,7 +658,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct uio_vm_ops = {
+static const struct vm_operations_struct uio_vm_ops = {
 	.open = uio_vma_open,
 	.close = uio_vma_close,
 	.fault = uio_vma_fault,
diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c
index 333ee02..864f0ba 100644
--- a/drivers/usb/class/usbtmc.c
+++ b/drivers/usb/class/usbtmc.c
@@ -993,7 +993,7 @@
 	return retval;
 }
 
-static struct file_operations fops = {
+static const struct file_operations fops = {
 	.owner		= THIS_MODULE,
 	.read		= usbtmc_read,
 	.write		= usbtmc_write,
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index c44367f..bf0f652 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -30,6 +30,7 @@
 #include <linux/wait.h>
 #include <linux/compiler.h>
 #include <asm/uaccess.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/poll.h>
 #include <linux/smp_lock.h>
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 2950015..2d867fd 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -875,7 +875,7 @@
 }
 
 /* used after endpoint configuration */
-static struct file_operations printer_io_operations = {
+static const struct file_operations printer_io_operations = {
 	.owner =	THIS_MODULE,
 	.open =		printer_open,
 	.read =		printer_read,
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index b5294a9..f1c0620 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -481,38 +481,47 @@
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-static int ohci_hcd_pxa27x_drv_suspend(struct platform_device *pdev, pm_message_t state)
+#ifdef CONFIG_PM
+static int ohci_hcd_pxa27x_drv_suspend(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
 
 	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
 	ohci->ohci.next_statechange = jiffies;
 
-	pxa27x_stop_hc(ohci, &pdev->dev);
+	pxa27x_stop_hc(ohci, dev);
 	hcd->state = HC_STATE_SUSPENDED;
 
 	return 0;
 }
 
-static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
+static int ohci_hcd_pxa27x_drv_resume(struct device *dev)
 {
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
+	struct usb_hcd *hcd = dev_get_drvdata(dev);
 	struct pxa27x_ohci *ohci = to_pxa27x_ohci(hcd);
+	struct pxaohci_platform_data *inf = dev->platform_data;
 	int status;
 
 	if (time_before(jiffies, ohci->ohci.next_statechange))
 		msleep(5);
 	ohci->ohci.next_statechange = jiffies;
 
-	if ((status = pxa27x_start_hc(ohci, &pdev->dev)) < 0)
+	if ((status = pxa27x_start_hc(ohci, dev)) < 0)
 		return status;
 
+	/* Select Power Management Mode */
+	pxa27x_ohci_select_pmm(ohci, inf->port_mode);
+
 	ohci_finish_controller_resume(hcd);
 	return 0;
 }
+
+static struct dev_pm_ops ohci_hcd_pxa27x_pm_ops = {
+	.suspend	= ohci_hcd_pxa27x_drv_suspend,
+	.resume		= ohci_hcd_pxa27x_drv_resume,
+};
 #endif
 
 /* work with hotplug and coldplug */
@@ -522,13 +531,12 @@
 	.probe		= ohci_hcd_pxa27x_drv_probe,
 	.remove		= ohci_hcd_pxa27x_drv_remove,
 	.shutdown	= usb_hcd_platform_shutdown,
-#ifdef CONFIG_PM
-	.suspend	= ohci_hcd_pxa27x_drv_suspend,
-	.resume		= ohci_hcd_pxa27x_drv_resume,
-#endif
 	.driver		= {
 		.name	= "pxa27x-ohci",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &ohci_hcd_pxa27x_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/usb/host/whci/debug.c b/drivers/usb/host/whci/debug.c
index cf2d459..2273c81 100644
--- a/drivers/usb/host/whci/debug.c
+++ b/drivers/usb/host/whci/debug.c
@@ -134,7 +134,7 @@
 	return single_open(file, pzl_print, inode->i_private);
 }
 
-static struct file_operations di_fops = {
+static const struct file_operations di_fops = {
 	.open    = di_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -142,7 +142,7 @@
 	.owner   = THIS_MODULE,
 };
 
-static struct file_operations asl_fops = {
+static const struct file_operations asl_fops = {
 	.open    = asl_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -150,7 +150,7 @@
 	.owner   = THIS_MODULE,
 };
 
-static struct file_operations pzl_fops = {
+static const struct file_operations pzl_fops = {
 	.open    = pzl_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
diff --git a/drivers/usb/misc/rio500.c b/drivers/usb/misc/rio500.c
index d645f38..32d0199 100644
--- a/drivers/usb/misc/rio500.c
+++ b/drivers/usb/misc/rio500.c
@@ -429,8 +429,7 @@
 	return read_count;
 }
 
-static struct
-file_operations usb_rio_fops = {
+static const struct file_operations usb_rio_fops = {
 	.owner =	THIS_MODULE,
 	.read =		read_rio,
 	.write =	write_rio,
diff --git a/drivers/usb/misc/sisusbvga/sisusb_init.c b/drivers/usb/misc/sisusbvga/sisusb_init.c
index 273de5d..0ab9907 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_init.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_init.c
@@ -43,7 +43,6 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
-#include <linux/kref.h>
 
 #include "sisusb.h"
 
diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c
index dfdc43e..9ed3e74 100644
--- a/drivers/usb/mon/mon_bin.c
+++ b/drivers/usb/mon/mon_bin.c
@@ -1174,7 +1174,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct mon_bin_vm_ops = {
+static const struct vm_operations_struct mon_bin_vm_ops = {
 	.open =     mon_bin_vma_open,
 	.close =    mon_bin_vma_close,
 	.fault =    mon_bin_vma_fault,
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index ff75a35..aa6b2ae 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -192,7 +192,7 @@
  * This is the first place a new tty gets used.  Hence this is where we
  * acquire references to the usb_serial structure and the driver module,
  * where we store a pointer to the port, and where we do an autoresume.
- * All these actions are reversed in serial_release().
+ * All these actions are reversed in serial_cleanup().
  */
 static int serial_install(struct tty_driver *driver, struct tty_struct *tty)
 {
@@ -339,15 +339,16 @@
 }
 
 /**
- * serial_release - free resources post close/hangup
+ * serial_cleanup - free resources post close/hangup
  * @port: port to free up
  *
  * Do the resource freeing and refcount dropping for the port.
  * Avoid freeing the console.
  *
- * Called when the last tty kref is dropped.
+ * Called asynchronously after the last tty kref is dropped,
+ * and the tty layer has already done the tty_shutdown(tty);
  */
-static void serial_release(struct tty_struct *tty)
+static void serial_cleanup(struct tty_struct *tty)
 {
 	struct usb_serial_port *port = tty->driver_data;
 	struct usb_serial *serial;
@@ -361,9 +362,6 @@
 
 	dbg("%s - port %d", __func__, port->number);
 
-	/* Standard shutdown processing */
-	tty_shutdown(tty);
-
 	tty->driver_data = NULL;
 
 	serial = port->serial;
@@ -1210,7 +1208,7 @@
 	.chars_in_buffer =	serial_chars_in_buffer,
 	.tiocmget =		serial_tiocmget,
 	.tiocmset =		serial_tiocmset,
-	.shutdown = 		serial_release,
+	.cleanup = 		serial_cleanup,
 	.install = 		serial_install,
 	.proc_fops =		&serial_proc_fops,
 };
diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c
index 4a42993..2eecec0 100644
--- a/drivers/uwb/uwb-debug.c
+++ b/drivers/uwb/uwb-debug.c
@@ -205,7 +205,7 @@
 	return ret < 0 ? ret : len;
 }
 
-static struct file_operations command_fops = {
+static const struct file_operations command_fops = {
 	.open   = command_open,
 	.write  = command_write,
 	.read   = NULL,
@@ -255,7 +255,7 @@
 	return single_open(file, reservations_print, inode->i_private);
 }
 
-static struct file_operations reservations_fops = {
+static const struct file_operations reservations_fops = {
 	.open    = reservations_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
@@ -283,7 +283,7 @@
 	return single_open(file, drp_avail_print, inode->i_private);
 }
 
-static struct file_operations drp_avail_fops = {
+static const struct file_operations drp_avail_fops = {
 	.open    = drp_avail_open,
 	.read    = seq_read,
 	.llseek  = seq_lseek,
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 90861cd..09bfa96 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -31,6 +31,13 @@
 	  Say y here to support the LCD panels usually found on SHARP
 	  corgi (C7x0) and spitz (Cxx00) models.
 
+config LCD_LMS283GF05
+	tristate "Samsung LMS283GF05 LCD"
+	depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
+	help
+	  SPI driver for Samsung LMS283GF05. This provides basic support
+	  for powering the LCD up/down through a sysfs interface.
+
 config LCD_LTV350QV
 	tristate "Samsung LTV350QV LCD Panel"
 	depends on LCD_CLASS_DEVICE && SPI_MASTER
@@ -229,3 +236,29 @@
 	help
 	  If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
 	  backlight driver.
+
+config BACKLIGHT_WM831X
+	tristate "WM831x PMIC Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
+	help
+	  If you have a backlight driven by the ISINK and DCDC of a
+	  WM831x PMIC say y to enable the backlight driver for it.
+
+config BACKLIGHT_ADX
+	tristate "Avionic Design Xanthos Backlight Driver"
+	depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
+	default y
+	help
+	  Say Y to enable the backlight driver on Avionic Design Xanthos-based
+	  boards.
+
+config BACKLIGHT_ADP5520
+	tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
+	depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
+	help
+	  If you have a LCD backlight connected to the BST/BL_SNK output of
+	  ADP5520 or ADP5501, say Y here to enable this driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called adp5520_bl.
+
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 4eb178c..9a40554 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -3,6 +3,7 @@
 obj-$(CONFIG_LCD_CLASS_DEVICE)     += lcd.o
 obj-$(CONFIG_LCD_CORGI)		   += corgi_lcd.o
 obj-$(CONFIG_LCD_HP700)		   += jornada720_lcd.o
+obj-$(CONFIG_LCD_LMS283GF05)	   += lms283gf05.o
 obj-$(CONFIG_LCD_LTV350QV)	   += ltv350qv.o
 obj-$(CONFIG_LCD_ILI9320)	   += ili9320.o
 obj-$(CONFIG_LCD_PLATFORM)	   += platform_lcd.o
@@ -24,4 +25,7 @@
 obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
 obj-$(CONFIG_BACKLIGHT_TOSA)	+= tosa_bl.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)	+= kb3886_bl.o
+obj-$(CONFIG_BACKLIGHT_WM831X)	+= wm831x_bl.o
+obj-$(CONFIG_BACKLIGHT_ADX)    += adx_bl.o
+obj-$(CONFIG_BACKLIGHT_ADP5520)	+= adp5520_bl.o
 
diff --git a/drivers/video/backlight/adp5520_bl.c b/drivers/video/backlight/adp5520_bl.c
new file mode 100644
index 0000000..ad05da5
--- /dev/null
+++ b/drivers/video/backlight/adp5520_bl.c
@@ -0,0 +1,377 @@
+/*
+ * Backlight driver for Analog Devices ADP5520/ADP5501 MFD PMICs
+ *
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/adp5520.h>
+
+struct adp5520_bl {
+	struct device *master;
+	struct adp5520_backlight_platfrom_data *pdata;
+	struct mutex lock;
+	unsigned long cached_daylight_max;
+	int id;
+	int current_brightness;
+};
+
+static int adp5520_bl_set(struct backlight_device *bl, int brightness)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	struct device *master = data->master;
+	int ret = 0;
+
+	if (data->pdata->en_ambl_sens) {
+		if ((brightness > 0) && (brightness < ADP5020_MAX_BRIGHTNESS)) {
+			/* Disable Ambient Light auto adjust */
+			ret |= adp5520_clr_bits(master, BL_CONTROL,
+					BL_AUTO_ADJ);
+			ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+		} else {
+			/*
+			 * MAX_BRIGHTNESS -> Enable Ambient Light auto adjust
+			 * restore daylight l3 sysfs brightness
+			 */
+			ret |= adp5520_write(master, DAYLIGHT_MAX,
+					 data->cached_daylight_max);
+			ret |= adp5520_set_bits(master, BL_CONTROL,
+					 BL_AUTO_ADJ);
+		}
+	} else {
+		ret |= adp5520_write(master, DAYLIGHT_MAX, brightness);
+	}
+
+	if (data->current_brightness && brightness == 0)
+		ret |= adp5520_set_bits(master,
+				MODE_STATUS, DIM_EN);
+	else if (data->current_brightness == 0 && brightness)
+		ret |= adp5520_clr_bits(master,
+				MODE_STATUS, DIM_EN);
+
+	if (!ret)
+		data->current_brightness = brightness;
+
+	return ret;
+}
+
+static int adp5520_bl_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	return adp5520_bl_set(bl, brightness);
+}
+
+static int adp5520_bl_get_brightness(struct backlight_device *bl)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	int error;
+	uint8_t reg_val;
+
+	error = adp5520_read(data->master, BL_VALUE, &reg_val);
+
+	return error ? data->current_brightness : reg_val;
+}
+
+static struct backlight_ops adp5520_bl_ops = {
+	.update_status	= adp5520_bl_update_status,
+	.get_brightness	= adp5520_bl_get_brightness,
+};
+
+static int adp5520_bl_setup(struct backlight_device *bl)
+{
+	struct adp5520_bl *data = bl_get_data(bl);
+	struct device *master = data->master;
+	struct adp5520_backlight_platfrom_data *pdata = data->pdata;
+	int ret = 0;
+
+	ret |= adp5520_write(master, DAYLIGHT_MAX, pdata->l1_daylight_max);
+	ret |= adp5520_write(master, DAYLIGHT_DIM, pdata->l1_daylight_dim);
+
+	if (pdata->en_ambl_sens) {
+		data->cached_daylight_max = pdata->l1_daylight_max;
+		ret |= adp5520_write(master, OFFICE_MAX, pdata->l2_office_max);
+		ret |= adp5520_write(master, OFFICE_DIM, pdata->l2_office_dim);
+		ret |= adp5520_write(master, DARK_MAX, pdata->l3_dark_max);
+		ret |= adp5520_write(master, DARK_DIM, pdata->l3_dark_dim);
+		ret |= adp5520_write(master, L2_TRIP, pdata->l2_trip);
+		ret |= adp5520_write(master, L2_HYS, pdata->l2_hyst);
+		ret |= adp5520_write(master, L3_TRIP, pdata->l3_trip);
+		ret |= adp5520_write(master, L3_HYS, pdata->l3_hyst);
+		ret |= adp5520_write(master, ALS_CMPR_CFG,
+			ALS_CMPR_CFG_VAL(pdata->abml_filt, L3_EN));
+	}
+
+	ret |= adp5520_write(master, BL_CONTROL,
+			BL_CTRL_VAL(pdata->fade_led_law, pdata->en_ambl_sens));
+
+	ret |= adp5520_write(master, BL_FADE, FADE_VAL(pdata->fade_in,
+			pdata->fade_out));
+
+	ret |= adp5520_set_bits(master, MODE_STATUS, BL_EN | DIM_EN);
+
+	return ret;
+}
+
+static ssize_t adp5520_show(struct device *dev, char *buf, int reg)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+	int error;
+	uint8_t reg_val;
+
+	mutex_lock(&data->lock);
+	error = adp5520_read(data->master, reg, &reg_val);
+	mutex_unlock(&data->lock);
+
+	return sprintf(buf, "%u\n", reg_val);
+}
+
+static ssize_t adp5520_store(struct device *dev, const char *buf,
+			 size_t count, int reg)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&data->lock);
+	adp5520_write(data->master, reg, val);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t adp5520_bl_dark_max_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DARK_MAX);
+}
+
+static ssize_t adp5520_bl_dark_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DARK_MAX);
+}
+static DEVICE_ATTR(dark_max, 0664, adp5520_bl_dark_max_show,
+			adp5520_bl_dark_max_store);
+
+static ssize_t adp5520_bl_office_max_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, OFFICE_MAX);
+}
+
+static ssize_t adp5520_bl_office_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, OFFICE_MAX);
+}
+static DEVICE_ATTR(office_max, 0664, adp5520_bl_office_max_show,
+			adp5520_bl_office_max_store);
+
+static ssize_t adp5520_bl_daylight_max_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DAYLIGHT_MAX);
+}
+
+static ssize_t adp5520_bl_daylight_max_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct adp5520_bl *data = dev_get_drvdata(dev);
+
+	strict_strtoul(buf, 10, &data->cached_daylight_max);
+	return adp5520_store(dev, buf, count, DAYLIGHT_MAX);
+}
+static DEVICE_ATTR(daylight_max, 0664, adp5520_bl_daylight_max_show,
+			adp5520_bl_daylight_max_store);
+
+static ssize_t adp5520_bl_dark_dim_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DARK_DIM);
+}
+
+static ssize_t adp5520_bl_dark_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DARK_DIM);
+}
+static DEVICE_ATTR(dark_dim, 0664, adp5520_bl_dark_dim_show,
+			adp5520_bl_dark_dim_store);
+
+static ssize_t adp5520_bl_office_dim_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, OFFICE_DIM);
+}
+
+static ssize_t adp5520_bl_office_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, OFFICE_DIM);
+}
+static DEVICE_ATTR(office_dim, 0664, adp5520_bl_office_dim_show,
+			adp5520_bl_office_dim_store);
+
+static ssize_t adp5520_bl_daylight_dim_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	return adp5520_show(dev, buf, DAYLIGHT_DIM);
+}
+
+static ssize_t adp5520_bl_daylight_dim_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	return adp5520_store(dev, buf, count, DAYLIGHT_DIM);
+}
+static DEVICE_ATTR(daylight_dim, 0664, adp5520_bl_daylight_dim_show,
+			adp5520_bl_daylight_dim_store);
+
+static struct attribute *adp5520_bl_attributes[] = {
+	&dev_attr_dark_max.attr,
+	&dev_attr_dark_dim.attr,
+	&dev_attr_office_max.attr,
+	&dev_attr_office_dim.attr,
+	&dev_attr_daylight_max.attr,
+	&dev_attr_daylight_dim.attr,
+	NULL
+};
+
+static const struct attribute_group adp5520_bl_attr_group = {
+	.attrs = adp5520_bl_attributes,
+};
+
+static int __devinit adp5520_bl_probe(struct platform_device *pdev)
+{
+	struct backlight_device *bl;
+	struct adp5520_bl *data;
+	int ret = 0;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	data->master = pdev->dev.parent;
+	data->pdata = pdev->dev.platform_data;
+
+	if (data->pdata  == NULL) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		kfree(data);
+		return -ENODEV;
+	}
+
+	data->id = pdev->id;
+	data->current_brightness = 0;
+
+	mutex_init(&data->lock);
+
+	bl = backlight_device_register(pdev->name, data->master,
+			data, &adp5520_bl_ops);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		kfree(data);
+		return PTR_ERR(bl);
+	}
+
+	bl->props.max_brightness =
+		bl->props.brightness = ADP5020_MAX_BRIGHTNESS;
+
+	if (data->pdata->en_ambl_sens)
+		ret = sysfs_create_group(&bl->dev.kobj,
+			&adp5520_bl_attr_group);
+
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register sysfs\n");
+		backlight_device_unregister(bl);
+		kfree(data);
+	}
+
+	platform_set_drvdata(pdev, bl);
+	ret |= adp5520_bl_setup(bl);
+	backlight_update_status(bl);
+
+	return ret;
+}
+
+static int __devexit adp5520_bl_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct adp5520_bl *data = bl_get_data(bl);
+
+	adp5520_clr_bits(data->master, MODE_STATUS, BL_EN);
+
+	if (data->pdata->en_ambl_sens)
+		sysfs_remove_group(&bl->dev.kobj,
+				&adp5520_bl_attr_group);
+
+	backlight_device_unregister(bl);
+	kfree(data);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int adp5520_bl_suspend(struct platform_device *pdev,
+				 pm_message_t state)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	return adp5520_bl_set(bl, 0);
+}
+
+static int adp5520_bl_resume(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+
+	backlight_update_status(bl);
+	return 0;
+}
+#else
+#define adp5520_bl_suspend	NULL
+#define adp5520_bl_resume	NULL
+#endif
+
+static struct platform_driver adp5520_bl_driver = {
+	.driver		= {
+		.name	= "adp5520-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= adp5520_bl_probe,
+	.remove		= __devexit_p(adp5520_bl_remove),
+	.suspend	= adp5520_bl_suspend,
+	.resume		= adp5520_bl_resume,
+};
+
+static int __init adp5520_bl_init(void)
+{
+	return platform_driver_register(&adp5520_bl_driver);
+}
+module_init(adp5520_bl_init);
+
+static void __exit adp5520_bl_exit(void)
+{
+	platform_driver_unregister(&adp5520_bl_driver);
+}
+module_exit(adp5520_bl_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("ADP5520(01) Backlight Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:adp5520-backlight");
diff --git a/drivers/video/backlight/adx_bl.c b/drivers/video/backlight/adx_bl.c
new file mode 100644
index 0000000..2c3bdfc
--- /dev/null
+++ b/drivers/video/backlight/adx_bl.c
@@ -0,0 +1,178 @@
+/*
+ * linux/drivers/video/backlight/adx.c
+ *
+ * Copyright (C) 2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Written by Thierry Reding <thierry.reding@avionic-design.de>
+ */
+
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+/* register definitions */
+#define ADX_BACKLIGHT_CONTROL		0x00
+#define ADX_BACKLIGHT_CONTROL_ENABLE	(1 << 0)
+#define ADX_BACKLIGHT_BRIGHTNESS	0x08
+#define ADX_BACKLIGHT_STATUS		0x10
+#define ADX_BACKLIGHT_ERROR		0x18
+
+struct adxbl {
+	void __iomem *base;
+};
+
+static int adx_backlight_update_status(struct backlight_device *bldev)
+{
+	struct adxbl *bl = bl_get_data(bldev);
+	u32 value;
+
+	value = bldev->props.brightness;
+	writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+
+	value = readl(bl->base + ADX_BACKLIGHT_CONTROL);
+
+	if (bldev->props.state & BL_CORE_FBBLANK)
+		value &= ~ADX_BACKLIGHT_CONTROL_ENABLE;
+	else
+		value |= ADX_BACKLIGHT_CONTROL_ENABLE;
+
+	writel(value, bl->base + ADX_BACKLIGHT_CONTROL);
+
+	return 0;
+}
+
+static int adx_backlight_get_brightness(struct backlight_device *bldev)
+{
+	struct adxbl *bl = bl_get_data(bldev);
+	u32 brightness;
+
+	brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS);
+	return brightness & 0xff;
+}
+
+static int adx_backlight_check_fb(struct fb_info *fb)
+{
+	return 1;
+}
+
+static struct backlight_ops adx_backlight_ops = {
+	.options = 0,
+	.update_status = adx_backlight_update_status,
+	.get_brightness = adx_backlight_get_brightness,
+	.check_fb = adx_backlight_check_fb,
+};
+
+static int __devinit adx_backlight_probe(struct platform_device *pdev)
+{
+	struct backlight_device *bldev;
+	struct resource *res;
+	struct adxbl *bl;
+	int ret = 0;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+			resource_size(res), res->name);
+	if (!res) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
+	if (!bl) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bl->base = devm_ioremap_nocache(&pdev->dev, res->start,
+			resource_size(res));
+	if (!bl->base) {
+		ret = -ENXIO;
+		goto out;
+	}
+
+	bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl,
+			&adx_backlight_ops);
+	if (!bldev) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bldev->props.max_brightness = 0xff;
+	bldev->props.brightness = 0xff;
+	bldev->props.power = FB_BLANK_UNBLANK;
+
+	platform_set_drvdata(pdev, bldev);
+
+out:
+	return ret;
+}
+
+static int __devexit adx_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bldev;
+	int ret = 0;
+
+	bldev = platform_get_drvdata(pdev);
+	bldev->props.power = FB_BLANK_UNBLANK;
+	bldev->props.brightness = 0xff;
+	backlight_update_status(bldev);
+	backlight_device_unregister(bldev);
+	platform_set_drvdata(pdev, NULL);
+
+	return ret;
+}
+
+#ifdef CONFIG_PM
+static int adx_backlight_suspend(struct platform_device *pdev,
+		pm_message_t state)
+{
+	return 0;
+}
+
+static int adx_backlight_resume(struct platform_device *pdev)
+{
+	return 0;
+}
+#else
+#define adx_backlight_suspend NULL
+#define adx_backlight_resume NULL
+#endif
+
+static struct platform_driver adx_backlight_driver = {
+	.probe = adx_backlight_probe,
+	.remove = __devexit_p(adx_backlight_remove),
+	.suspend = adx_backlight_suspend,
+	.resume = adx_backlight_resume,
+	.driver = {
+		.name = "adx-backlight",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init adx_backlight_init(void)
+{
+	return platform_driver_register(&adx_backlight_driver);
+}
+
+static void __exit adx_backlight_exit(void)
+{
+	platform_driver_unregister(&adx_backlight_driver);
+}
+
+module_init(adx_backlight_init);
+module_exit(adx_backlight_exit);
+
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 157057c..6615ac7 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -73,6 +73,27 @@
 }
 #endif /* CONFIG_FB */
 
+static void backlight_generate_event(struct backlight_device *bd,
+				     enum backlight_update_reason reason)
+{
+	char *envp[2];
+
+	switch (reason) {
+	case BACKLIGHT_UPDATE_SYSFS:
+		envp[0] = "SOURCE=sysfs";
+		break;
+	case BACKLIGHT_UPDATE_HOTKEY:
+		envp[0] = "SOURCE=hotkey";
+		break;
+	default:
+		envp[0] = "SOURCE=unknown";
+		break;
+	}
+	envp[1] = NULL;
+	kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp);
+	sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness");
+}
+
 static ssize_t backlight_show_power(struct device *dev,
 		struct device_attribute *attr,char *buf)
 {
@@ -142,6 +163,8 @@
 	}
 	mutex_unlock(&bd->ops_lock);
 
+	backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS);
+
 	return rc;
 }
 
@@ -214,6 +237,25 @@
 };
 
 /**
+ * backlight_force_update - tell the backlight subsystem that hardware state
+ *   has changed
+ * @bd: the backlight device to update
+ *
+ * Updates the internal state of the backlight in response to a hardware event,
+ * and generate a uevent to notify userspace
+ */
+void backlight_force_update(struct backlight_device *bd,
+			    enum backlight_update_reason reason)
+{
+	mutex_lock(&bd->ops_lock);
+	if (bd->ops && bd->ops->get_brightness)
+		bd->props.brightness = bd->ops->get_brightness(bd);
+	mutex_unlock(&bd->ops_lock);
+	backlight_generate_event(bd, reason);
+}
+EXPORT_SYMBOL(backlight_force_update);
+
+/**
  * backlight_device_register - create and register a new object of
  *   backlight_device class.
  * @name: the name of the new object(must be the same as the name of the
diff --git a/drivers/video/backlight/da903x_bl.c b/drivers/video/backlight/da903x_bl.c
index 93bb434..701a108 100644
--- a/drivers/video/backlight/da903x_bl.c
+++ b/drivers/video/backlight/da903x_bl.c
@@ -154,34 +154,38 @@
 }
 
 #ifdef CONFIG_PM
-static int da903x_backlight_suspend(struct platform_device *pdev,
-				 pm_message_t state)
+static int da903x_backlight_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 	return da903x_backlight_set(bl, 0);
 }
 
-static int da903x_backlight_resume(struct platform_device *pdev)
+static int da903x_backlight_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
 	struct backlight_device *bl = platform_get_drvdata(pdev);
 
 	backlight_update_status(bl);
 	return 0;
 }
-#else
-#define da903x_backlight_suspend	NULL
-#define da903x_backlight_resume		NULL
+
+static struct dev_pm_ops da903x_backlight_pm_ops = {
+	.suspend	= da903x_backlight_suspend,
+	.resume		= da903x_backlight_resume,
+};
 #endif
 
 static struct platform_driver da903x_backlight_driver = {
 	.driver		= {
 		.name	= "da903x-backlight",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &da903x_backlight_pm_ops,
+#endif
 	},
 	.probe		= da903x_backlight_probe,
 	.remove		= da903x_backlight_remove,
-	.suspend	= da903x_backlight_suspend,
-	.resume		= da903x_backlight_resume,
 };
 
 static int __init da903x_backlight_init(void)
diff --git a/drivers/video/backlight/hp680_bl.c b/drivers/video/backlight/hp680_bl.c
index 5be55a2..7fb4eef 100644
--- a/drivers/video/backlight/hp680_bl.c
+++ b/drivers/video/backlight/hp680_bl.c
@@ -103,7 +103,7 @@
 	.update_status  = hp680bl_set_intensity,
 };
 
-static int __init hp680bl_probe(struct platform_device *pdev)
+static int __devinit hp680bl_probe(struct platform_device *pdev)
 {
 	struct backlight_device *bd;
 
diff --git a/drivers/video/backlight/lms283gf05.c b/drivers/video/backlight/lms283gf05.c
new file mode 100644
index 0000000..447b542
--- /dev/null
+++ b/drivers/video/backlight/lms283gf05.c
@@ -0,0 +1,242 @@
+/*
+ * lms283gf05.c -- support for Samsung LMS283GF05 LCD
+ *
+ * Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/lcd.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/lms283gf05.h>
+
+struct lms283gf05_state {
+	struct spi_device	*spi;
+	struct lcd_device	*ld;
+};
+
+struct lms283gf05_seq {
+	unsigned char		reg;
+	unsigned short		value;
+	unsigned char		delay;
+};
+
+/* Magic sequences supplied by manufacturer, for details refer to datasheet */
+static struct lms283gf05_seq disp_initseq[] = {
+	/* REG, VALUE, DELAY */
+	{ 0x07, 0x0000, 0 },
+	{ 0x13, 0x0000, 10 },
+
+	{ 0x11, 0x3004, 0 },
+	{ 0x14, 0x200F, 0 },
+	{ 0x10, 0x1a20, 0 },
+	{ 0x13, 0x0040, 50 },
+
+	{ 0x13, 0x0060, 0 },
+	{ 0x13, 0x0070, 200 },
+
+	{ 0x01, 0x0127, 0 },
+	{ 0x02,	0x0700, 0 },
+	{ 0x03, 0x1030, 0 },
+	{ 0x08, 0x0208, 0 },
+	{ 0x0B, 0x0620, 0 },
+	{ 0x0C, 0x0110, 0 },
+	{ 0x30, 0x0120, 0 },
+	{ 0x31, 0x0127, 0 },
+	{ 0x32, 0x0000, 0 },
+	{ 0x33, 0x0503, 0 },
+	{ 0x34, 0x0727, 0 },
+	{ 0x35, 0x0124, 0 },
+	{ 0x36, 0x0706, 0 },
+	{ 0x37, 0x0701, 0 },
+	{ 0x38, 0x0F00, 0 },
+	{ 0x39, 0x0F00, 0 },
+	{ 0x40, 0x0000, 0 },
+	{ 0x41, 0x0000, 0 },
+	{ 0x42, 0x013f, 0 },
+	{ 0x43, 0x0000, 0 },
+	{ 0x44, 0x013f, 0 },
+	{ 0x45, 0x0000, 0 },
+	{ 0x46, 0xef00, 0 },
+	{ 0x47, 0x013f, 0 },
+	{ 0x48, 0x0000, 0 },
+	{ 0x07, 0x0015, 30 },
+
+	{ 0x07, 0x0017, 0 },
+
+	{ 0x20, 0x0000, 0 },
+	{ 0x21, 0x0000, 0 },
+	{ 0x22, 0x0000, 0 }
+};
+
+static struct lms283gf05_seq disp_pdwnseq[] = {
+	{ 0x07, 0x0016, 30 },
+
+	{ 0x07, 0x0004, 0 },
+	{ 0x10, 0x0220, 20 },
+
+	{ 0x13, 0x0060, 50 },
+
+	{ 0x13, 0x0040, 50 },
+
+	{ 0x13, 0x0000, 0 },
+	{ 0x10, 0x0000, 0 }
+};
+
+
+static void lms283gf05_reset(unsigned long gpio, bool inverted)
+{
+	gpio_set_value(gpio, !inverted);
+	mdelay(100);
+	gpio_set_value(gpio, inverted);
+	mdelay(20);
+	gpio_set_value(gpio, !inverted);
+	mdelay(20);
+}
+
+static void lms283gf05_toggle(struct spi_device *spi,
+			struct lms283gf05_seq *seq, int sz)
+{
+	char buf[3];
+	int i;
+
+	for (i = 0; i < sz; i++) {
+		buf[0] = 0x74;
+		buf[1] = 0x00;
+		buf[2] = seq[i].reg;
+		spi_write(spi, buf, 3);
+
+		buf[0] = 0x76;
+		buf[1] = seq[i].value >> 8;
+		buf[2] = seq[i].value & 0xff;
+		spi_write(spi, buf, 3);
+
+		mdelay(seq[i].delay);
+	}
+}
+
+static int lms283gf05_power_set(struct lcd_device *ld, int power)
+{
+	struct lms283gf05_state *st = lcd_get_data(ld);
+	struct spi_device *spi = st->spi;
+	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+
+	if (power) {
+		if (pdata)
+			lms283gf05_reset(pdata->reset_gpio,
+					pdata->reset_inverted);
+		lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+	} else {
+		lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
+		if (pdata)
+			gpio_set_value(pdata->reset_gpio,
+					pdata->reset_inverted);
+	}
+
+	return 0;
+}
+
+static struct lcd_ops lms_ops = {
+	.set_power	= lms283gf05_power_set,
+	.get_power	= NULL,
+};
+
+static int __devinit lms283gf05_probe(struct spi_device *spi)
+{
+	struct lms283gf05_state *st;
+	struct lms283gf05_pdata *pdata = spi->dev.platform_data;
+	struct lcd_device *ld;
+	int ret = 0;
+
+	if (pdata != NULL) {
+		ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET");
+		if (ret)
+			return ret;
+
+		ret = gpio_direction_output(pdata->reset_gpio,
+						!pdata->reset_inverted);
+		if (ret)
+			goto err;
+	}
+
+	st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL);
+	if (st == NULL) {
+		dev_err(&spi->dev, "No memory for device state\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops);
+	if (IS_ERR(ld)) {
+		ret = PTR_ERR(ld);
+		goto err2;
+	}
+
+	st->spi = spi;
+	st->ld = ld;
+
+	dev_set_drvdata(&spi->dev, st);
+
+	/* kick in the LCD */
+	if (pdata)
+		lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
+	lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
+
+	return 0;
+
+err2:
+	kfree(st);
+err:
+	if (pdata != NULL)
+		gpio_free(pdata->reset_gpio);
+
+	return ret;
+}
+
+static int __devexit lms283gf05_remove(struct spi_device *spi)
+{
+	struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
+	struct lms283gf05_pdata *pdata = st->spi->dev.platform_data;
+
+	lcd_device_unregister(st->ld);
+
+	if (pdata != NULL)
+		gpio_free(pdata->reset_gpio);
+
+	kfree(st);
+
+	return 0;
+}
+
+static struct spi_driver lms283gf05_driver = {
+	.driver = {
+		.name	= "lms283gf05",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= lms283gf05_probe,
+	.remove		= __devexit_p(lms283gf05_remove),
+};
+
+static __init int lms283gf05_init(void)
+{
+	return spi_register_driver(&lms283gf05_driver);
+}
+
+static __exit void lms283gf05_exit(void)
+{
+	spi_unregister_driver(&lms283gf05_driver);
+}
+
+module_init(lms283gf05_init);
+module_exit(lms283gf05_exit);
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("LCD283GF05 LCD");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/video/backlight/mbp_nvidia_bl.c b/drivers/video/backlight/mbp_nvidia_bl.c
index 3bb4c0a..9edb8d7 100644
--- a/drivers/video/backlight/mbp_nvidia_bl.c
+++ b/drivers/video/backlight/mbp_nvidia_bl.c
@@ -166,6 +166,15 @@
 	},
 	{
 		.callback	= mbp_dmi_match,
+		.ident		= "MacBookAir 1,1",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir1,1"),
+		},
+		.driver_data	= (void *)&intel_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
 		.ident		= "MacBook 5,1",
 		.matches	= {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -175,6 +184,15 @@
 	},
 	{
 		.callback	= mbp_dmi_match,
+		.ident		= "MacBook 5,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
 		.ident		= "MacBookAir 2,1",
 		.matches	= {
 			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
@@ -191,6 +209,24 @@
 		},
 		.driver_data	= (void *)&nvidia_chipset_data,
 	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookPro 5,2",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,2"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
+	{
+		.callback	= mbp_dmi_match,
+		.ident		= "MacBookPro 5,5",
+		.matches	= {
+			DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,5"),
+		},
+		.driver_data	= (void *)&nvidia_chipset_data,
+	},
 	{ }
 };
 
diff --git a/drivers/video/backlight/wm831x_bl.c b/drivers/video/backlight/wm831x_bl.c
new file mode 100644
index 0000000..467bdb7
--- /dev/null
+++ b/drivers/video/backlight/wm831x_bl.c
@@ -0,0 +1,250 @@
+/*
+ * Backlight driver for Wolfson Microelectronics WM831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectonics plc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/mfd/wm831x/regulator.h>
+
+struct wm831x_backlight_data {
+	struct wm831x *wm831x;
+	int isink_reg;
+	int current_brightness;
+};
+
+static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
+{
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+	struct wm831x *wm831x = data->wm831x;
+	int power_up = !data->current_brightness && brightness;
+	int power_down = data->current_brightness && !brightness;
+	int ret;
+
+	if (power_up) {
+		/* Enable the ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_ENA, WM831X_CS1_ENA);
+		if (ret < 0)
+			goto err;
+
+		/* Enable the DC-DC */
+		ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+				      WM831X_DC4_ENA, WM831X_DC4_ENA);
+		if (ret < 0)
+			goto err;
+	}
+
+	if (power_down) {
+		/* DCDC first */
+		ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
+				      WM831X_DC4_ENA, 0);
+		if (ret < 0)
+			goto err;
+
+		/* ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
+		if (ret < 0)
+			goto err;
+	}
+
+	/* Set the new brightness */
+	ret = wm831x_set_bits(wm831x, data->isink_reg,
+			      WM831X_CS1_ISEL_MASK, brightness);
+	if (ret < 0)
+		goto err;
+
+	if (power_up) {
+		/* Drive current through the ISINK */
+		ret = wm831x_set_bits(wm831x, data->isink_reg,
+				      WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
+		if (ret < 0)
+			return ret;
+	}
+
+	data->current_brightness = brightness;
+
+	return 0;
+
+err:
+	/* If we were in the middle of a power transition always shut down
+	 * for safety.
+	 */
+	if (power_up || power_down) {
+		wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+		wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
+	}
+
+	return ret;
+}
+
+static int wm831x_backlight_update_status(struct backlight_device *bl)
+{
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	if (bl->props.state & BL_CORE_SUSPENDED)
+		brightness = 0;
+
+	return wm831x_backlight_set(bl, brightness);
+}
+
+static int wm831x_backlight_get_brightness(struct backlight_device *bl)
+{
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+	return data->current_brightness;
+}
+
+static struct backlight_ops wm831x_backlight_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status	= wm831x_backlight_update_status,
+	.get_brightness	= wm831x_backlight_get_brightness,
+};
+
+static int wm831x_backlight_probe(struct platform_device *pdev)
+{
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *wm831x_pdata;
+	struct wm831x_backlight_pdata *pdata;
+	struct wm831x_backlight_data *data;
+	struct backlight_device *bl;
+	int ret, i, max_isel, isink_reg, dcdc_cfg;
+
+	/* We need platform data */
+	if (pdev->dev.parent->platform_data) {
+		wm831x_pdata = pdev->dev.parent->platform_data;
+		pdata = wm831x_pdata->backlight;
+	} else {
+		pdata = NULL;
+	}
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data supplied\n");
+		return -EINVAL;
+	}
+
+	/* Figure out the maximum current we can use */
+	for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
+		if (wm831x_isinkv_values[i] > pdata->max_uA)
+			break;
+	}
+
+	if (i == 0) {
+		dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
+		return -EINVAL;
+	}
+	max_isel = i - 1;
+
+	if (pdata->max_uA != wm831x_isinkv_values[max_isel])
+		dev_warn(&pdev->dev,
+			 "Maximum current is %duA not %duA as requested\n",
+			 wm831x_isinkv_values[max_isel], pdata->max_uA);
+
+	switch (pdata->isink) {
+	case 1:
+		isink_reg = WM831X_CURRENT_SINK_1;
+		dcdc_cfg = 0;
+		break;
+	case 2:
+		isink_reg = WM831X_CURRENT_SINK_2;
+		dcdc_cfg = WM831X_DC4_FBSRC;
+		break;
+	default:
+		dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
+		return -EINVAL;
+	}
+
+	/* Configure the ISINK to use for feedback */
+	ret = wm831x_reg_unlock(wm831x);
+	if (ret < 0)
+		return ret;
+
+	ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
+			      dcdc_cfg);
+
+	wm831x_reg_lock(wm831x);
+	if (ret < 0)
+		return ret;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (data == NULL)
+		return -ENOMEM;
+
+	data->wm831x = wm831x;
+	data->current_brightness = 0;
+	data->isink_reg = isink_reg;
+
+	bl = backlight_device_register("wm831x", &pdev->dev,
+			data, &wm831x_backlight_ops);
+	if (IS_ERR(bl)) {
+		dev_err(&pdev->dev, "failed to register backlight\n");
+		kfree(data);
+		return PTR_ERR(bl);
+	}
+
+	bl->props.max_brightness = max_isel;
+	bl->props.brightness = max_isel;
+
+	platform_set_drvdata(pdev, bl);
+
+	/* Disable the DCDC if it was started so we can bootstrap */
+	wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
+
+
+	backlight_update_status(bl);
+
+	return 0;
+}
+
+static int wm831x_backlight_remove(struct platform_device *pdev)
+{
+	struct backlight_device *bl = platform_get_drvdata(pdev);
+	struct wm831x_backlight_data *data = bl_get_data(bl);
+
+	backlight_device_unregister(bl);
+	kfree(data);
+	return 0;
+}
+
+static struct platform_driver wm831x_backlight_driver = {
+	.driver		= {
+		.name	= "wm831x-backlight",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= wm831x_backlight_probe,
+	.remove		= wm831x_backlight_remove,
+};
+
+static int __init wm831x_backlight_init(void)
+{
+	return platform_driver_register(&wm831x_backlight_driver);
+}
+module_init(wm831x_backlight_init);
+
+static void __exit wm831x_backlight_exit(void)
+{
+	platform_driver_unregister(&wm831x_backlight_driver);
+}
+module_exit(wm831x_backlight_exit);
+
+MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backlight");
diff --git a/drivers/video/fb_defio.c b/drivers/video/fb_defio.c
index 0a7a667..c27ab1e 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fb_defio.c
@@ -125,7 +125,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct fb_deferred_io_vm_ops = {
+static const struct vm_operations_struct fb_deferred_io_vm_ops = {
 	.fault		= fb_deferred_io_fault,
 	.page_mkwrite	= fb_deferred_io_mkwrite,
 };
diff --git a/drivers/video/fbmem.c b/drivers/video/fbmem.c
index a1f2e7c..99bbd28 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbmem.c
@@ -1800,7 +1800,7 @@
  		global = 1;
  	}
 
- 	if (!global && !strstr(options, "fb:")) {
+ 	if (!global && !strchr(options, ':')) {
  		fb_mode_option = options;
  		global = 1;
  	}
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index 80a11d0..f16e421 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -1035,7 +1035,7 @@
 	atomic_dec(&dispc.map_count[plane]);
 }
 
-static struct vm_operations_struct mmap_user_ops = {
+static const struct vm_operations_struct mmap_user_ops = {
 	.open = mmap_user_open,
 	.close = mmap_user_close,
 };
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 6506117..1820c4a 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -1638,24 +1638,26 @@
  * Power management hooks.  Note that we won't be called from IRQ context,
  * unlike the blank functions above, so we may sleep.
  */
-static int pxafb_suspend(struct platform_device *dev, pm_message_t state)
+static int pxafb_suspend(struct device *dev)
 {
-	struct pxafb_info *fbi = platform_get_drvdata(dev);
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
 	set_ctrlr_state(fbi, C_DISABLE_PM);
 	return 0;
 }
 
-static int pxafb_resume(struct platform_device *dev)
+static int pxafb_resume(struct device *dev)
 {
-	struct pxafb_info *fbi = platform_get_drvdata(dev);
+	struct pxafb_info *fbi = dev_get_drvdata(dev);
 
 	set_ctrlr_state(fbi, C_ENABLE_PM);
 	return 0;
 }
-#else
-#define pxafb_suspend	NULL
-#define pxafb_resume	NULL
+
+static struct dev_pm_ops pxafb_pm_ops = {
+	.suspend	= pxafb_suspend,
+	.resume		= pxafb_resume,
+};
 #endif
 
 static int __devinit pxafb_init_video_memory(struct pxafb_info *fbi)
@@ -2081,6 +2083,9 @@
 		goto failed;
 	}
 
+	if (cpu_is_pxa3xx() && inf->acceleration_enabled)
+		fbi->fb.fix.accel = FB_ACCEL_PXA3XX;
+
 	fbi->backlight_power = inf->pxafb_backlight_power;
 	fbi->lcd_power = inf->pxafb_lcd_power;
 
@@ -2091,14 +2096,14 @@
 		goto failed_fbi;
 	}
 
-	r = request_mem_region(r->start, r->end - r->start + 1, dev->name);
+	r = request_mem_region(r->start, resource_size(r), dev->name);
 	if (r == NULL) {
 		dev_err(&dev->dev, "failed to request I/O memory\n");
 		ret = -EBUSY;
 		goto failed_fbi;
 	}
 
-	fbi->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	fbi->mmio_base = ioremap(r->start, resource_size(r));
 	if (fbi->mmio_base == NULL) {
 		dev_err(&dev->dev, "failed to map I/O memory\n");
 		ret = -EBUSY;
@@ -2197,7 +2202,7 @@
 failed_free_io:
 	iounmap(fbi->mmio_base);
 failed_free_res:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 failed_fbi:
 	clk_put(fbi->clk);
 	platform_set_drvdata(dev, NULL);
@@ -2237,7 +2242,7 @@
 	iounmap(fbi->mmio_base);
 
 	r = platform_get_resource(dev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 
 	clk_put(fbi->clk);
 	kfree(fbi);
@@ -2248,11 +2253,12 @@
 static struct platform_driver pxafb_driver = {
 	.probe		= pxafb_probe,
 	.remove 	= __devexit_p(pxafb_remove),
-	.suspend	= pxafb_suspend,
-	.resume		= pxafb_resume,
 	.driver		= {
 		.owner	= THIS_MODULE,
 		.name	= "pxa2xx-fb",
+#ifdef CONFIG_PM
+		.pm	= &pxafb_pm_ops,
+#endif
 	},
 };
 
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index df52cb3..406caa6 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -24,19 +24,6 @@
 #include "../w1_int.h"
 
 /**
- * Address is selected using 2 pins, resulting in 4 possible addresses.
- *  0x18, 0x19, 0x1a, 0x1b
- * However, the chip cannot be detected without doing an i2c write,
- * so use the force module parameter.
- */
-static const unsigned short normal_i2c[] = { I2C_CLIENT_END };
-
-/**
- * Insmod parameters
- */
-I2C_CLIENT_INSMOD_1(ds2482);
-
-/**
  * The DS2482 registers - there are 3 registers that are addressed by a read
  * pointer. The read pointer is set by the last command executed.
  *
@@ -96,8 +83,6 @@
 
 static int ds2482_probe(struct i2c_client *client,
 			const struct i2c_device_id *id);
-static int ds2482_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info);
 static int ds2482_remove(struct i2c_client *client);
 
 
@@ -117,8 +102,6 @@
 	.probe		= ds2482_probe,
 	.remove		= ds2482_remove,
 	.id_table	= ds2482_id,
-	.detect		= ds2482_detect,
-	.address_data	= &addr_data,
 };
 
 /*
@@ -425,19 +408,6 @@
 }
 
 
-static int ds2482_detect(struct i2c_client *client, int kind,
-			 struct i2c_board_info *info)
-{
-	if (!i2c_check_functionality(client->adapter,
-				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
-				     I2C_FUNC_SMBUS_BYTE))
-		return -ENODEV;
-
-	strlcpy(info->type, "ds2482", I2C_NAME_SIZE);
-
-	return 0;
-}
-
 static int ds2482_probe(struct i2c_client *client,
 			const struct i2c_device_id *id)
 {
@@ -446,6 +416,11 @@
 	int temp1;
 	int idx;
 
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+				     I2C_FUNC_SMBUS_BYTE))
+		return -ENODEV;
+
 	if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
 		err = -ENOMEM;
 		goto exit;
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index ff3eb8f..3711b88 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -282,6 +282,13 @@
 	  To compile this driver as a module, choose M here: the
 	  module will be called nuc900_wdt.
 
+config ADX_WATCHDOG
+	tristate "Avionic Design Xanthos watchdog"
+	depends on ARCH_PXA_ADX
+	help
+	  Say Y here if you want support for the watchdog timer on Avionic
+	  Design Xanthos boards.
+
 # AVR32 Architecture
 
 config AT32AP700X_WDT
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 348b3b8..699199b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -45,6 +45,7 @@
 obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
 obj-$(CONFIG_STMP3XXX_WATCHDOG) += stmp3xxx_wdt.o
 obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
+obj-$(CONFIG_ADX_WATCHDOG) += adx_wdt.o
 
 # AVR32 Architecture
 obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
diff --git a/drivers/watchdog/adx_wdt.c b/drivers/watchdog/adx_wdt.c
new file mode 100644
index 0000000..77afb0a
--- /dev/null
+++ b/drivers/watchdog/adx_wdt.c
@@ -0,0 +1,354 @@
+/*
+ * Copyright (C) 2008-2009 Avionic Design GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/io.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+#include <linux/watchdog.h>
+
+#define WATCHDOG_NAME "adx-wdt"
+
+/* register offsets */
+#define	ADX_WDT_CONTROL		0x00
+#define	ADX_WDT_CONTROL_ENABLE	(1 << 0)
+#define	ADX_WDT_CONTROL_nRESET	(1 << 1)
+#define	ADX_WDT_TIMEOUT		0x08
+
+static struct platform_device *adx_wdt_dev;
+static unsigned long driver_open;
+
+#define	WDT_STATE_STOP	0
+#define	WDT_STATE_START	1
+
+struct adx_wdt {
+	void __iomem *base;
+	unsigned long timeout;
+	unsigned int state;
+	unsigned int wake;
+	spinlock_t lock;
+};
+
+static struct watchdog_info adx_wdt_info = {
+	.identity = "Avionic Design Xanthos Watchdog",
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+};
+
+static void adx_wdt_start_locked(struct adx_wdt *wdt)
+{
+	u32 ctrl;
+
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl |= ADX_WDT_CONTROL_ENABLE;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+	wdt->state = WDT_STATE_START;
+}
+
+static void adx_wdt_start(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	adx_wdt_start_locked(wdt);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_stop_locked(struct adx_wdt *wdt)
+{
+	u32 ctrl;
+
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+	wdt->state = WDT_STATE_STOP;
+}
+
+static void adx_wdt_stop(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	adx_wdt_stop_locked(wdt);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_set_timeout(struct adx_wdt *wdt, unsigned long seconds)
+{
+	unsigned long timeout = seconds * 1000;
+	unsigned long flags;
+	unsigned int state;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	state = wdt->state;
+	adx_wdt_stop_locked(wdt);
+	writel(timeout, wdt->base + ADX_WDT_TIMEOUT);
+
+	if (state == WDT_STATE_START)
+		adx_wdt_start_locked(wdt);
+
+	wdt->timeout = timeout;
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static void adx_wdt_get_timeout(struct adx_wdt *wdt, unsigned long *seconds)
+{
+	*seconds = wdt->timeout / 1000;
+}
+
+static void adx_wdt_keepalive(struct adx_wdt *wdt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&wdt->lock, flags);
+	writel(wdt->timeout, wdt->base + ADX_WDT_TIMEOUT);
+	spin_unlock_irqrestore(&wdt->lock, flags);
+}
+
+static int adx_wdt_open(struct inode *inode, struct file *file)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(adx_wdt_dev);
+
+	if (test_and_set_bit(0, &driver_open))
+		return -EBUSY;
+
+	file->private_data = wdt;
+	adx_wdt_set_timeout(wdt, 30);
+	adx_wdt_start(wdt);
+
+	return nonseekable_open(inode, file);
+}
+
+static int adx_wdt_release(struct inode *inode, struct file *file)
+{
+	struct adx_wdt *wdt = file->private_data;
+
+	adx_wdt_stop(wdt);
+	clear_bit(0, &driver_open);
+
+	return 0;
+}
+
+static long adx_wdt_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
+{
+	struct adx_wdt *wdt = file->private_data;
+	void __user *argp = (void __user *)arg;
+	unsigned long __user *p = argp;
+	unsigned long seconds = 0;
+	unsigned int options;
+	long ret = -EINVAL;
+
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user(argp, &adx_wdt_info, sizeof(adx_wdt_info)))
+			return -EFAULT;
+		else
+			return 0;
+
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, p);
+
+	case WDIOC_KEEPALIVE:
+		adx_wdt_keepalive(wdt);
+		return 0;
+
+	case WDIOC_SETTIMEOUT:
+		if (get_user(seconds, p))
+			return -EFAULT;
+
+		adx_wdt_set_timeout(wdt, seconds);
+
+		/* fallthrough */
+	case WDIOC_GETTIMEOUT:
+		adx_wdt_get_timeout(wdt, &seconds);
+		return put_user(seconds, p);
+
+	case WDIOC_SETOPTIONS:
+		if (copy_from_user(&options, argp, sizeof(options)))
+			return -EFAULT;
+
+		if (options & WDIOS_DISABLECARD) {
+			adx_wdt_stop(wdt);
+			ret = 0;
+		}
+
+		if (options & WDIOS_ENABLECARD) {
+			adx_wdt_start(wdt);
+			ret = 0;
+		}
+
+		return ret;
+
+	default:
+		break;
+	}
+
+	return -ENOTTY;
+}
+
+static ssize_t adx_wdt_write(struct file *file, const char __user *data,
+		size_t len, loff_t *ppos)
+{
+	struct adx_wdt *wdt = file->private_data;
+
+	if (len)
+		adx_wdt_keepalive(wdt);
+
+	return len;
+}
+
+static const struct file_operations adx_wdt_fops = {
+	.owner = THIS_MODULE,
+	.llseek = no_llseek,
+	.open = adx_wdt_open,
+	.release = adx_wdt_release,
+	.unlocked_ioctl = adx_wdt_ioctl,
+	.write = adx_wdt_write,
+};
+
+static struct miscdevice adx_wdt_miscdev = {
+	.minor = WATCHDOG_MINOR,
+	.name = "watchdog",
+	.fops = &adx_wdt_fops,
+};
+
+static int __devinit adx_wdt_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct adx_wdt *wdt;
+	int ret = 0;
+	u32 ctrl;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt) {
+		dev_err(&pdev->dev, "cannot allocate WDT structure\n");
+		return -ENOMEM;
+	}
+
+	spin_lock_init(&wdt->lock);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot obtain I/O memory region\n");
+		return -ENXIO;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+			res->end - res->start + 1, res->name);
+	if (!res) {
+		dev_err(&pdev->dev, "cannot request I/O memory region\n");
+		return -ENXIO;
+	}
+
+	wdt->base = devm_ioremap_nocache(&pdev->dev, res->start,
+			res->end - res->start + 1);
+	if (!wdt->base) {
+		dev_err(&pdev->dev, "cannot remap I/O memory region\n");
+		return -ENXIO;
+	}
+
+	/* disable watchdog and reboot on timeout */
+	ctrl = readl(wdt->base + ADX_WDT_CONTROL);
+	ctrl &= ~ADX_WDT_CONTROL_ENABLE;
+	ctrl &= ~ADX_WDT_CONTROL_nRESET;
+	writel(ctrl, wdt->base + ADX_WDT_CONTROL);
+
+	platform_set_drvdata(pdev, wdt);
+	adx_wdt_dev = pdev;
+
+	ret = misc_register(&adx_wdt_miscdev);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot register miscdev on minor %d "
+				"(err=%d)\n", WATCHDOG_MINOR, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int __devexit adx_wdt_remove(struct platform_device *pdev)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	misc_deregister(&adx_wdt_miscdev);
+	adx_wdt_stop(wdt);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static void adx_wdt_shutdown(struct platform_device *pdev)
+{
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+	adx_wdt_stop(wdt);
+}
+
+#ifdef CONFIG_PM
+static int adx_wdt_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	wdt->wake = (wdt->state == WDT_STATE_START) ? 1 : 0;
+	adx_wdt_stop(wdt);
+
+	return 0;
+}
+
+static int adx_wdt_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct adx_wdt *wdt = platform_get_drvdata(pdev);
+
+	if (wdt->wake)
+		adx_wdt_start(wdt);
+
+	return 0;
+}
+
+static struct dev_pm_ops adx_wdt_pm_ops = {
+	.suspend = adx_wdt_suspend,
+	.resume = adx_wdt_resume,
+};
+
+#  define ADX_WDT_PM_OPS	(&adx_wdt_pm_ops)
+#else
+#  define ADX_WDT_PM_OPS	NULL
+#endif
+
+static struct platform_driver adx_wdt_driver = {
+	.probe = adx_wdt_probe,
+	.remove = __devexit_p(adx_wdt_remove),
+	.shutdown = adx_wdt_shutdown,
+	.driver = {
+		.name = WATCHDOG_NAME,
+		.owner = THIS_MODULE,
+		.pm = ADX_WDT_PM_OPS,
+	},
+};
+
+static int __init adx_wdt_init(void)
+{
+	return platform_driver_register(&adx_wdt_driver);
+}
+
+static void __exit adx_wdt_exit(void)
+{
+	platform_driver_unregister(&adx_wdt_driver);
+}
+
+module_init(adx_wdt_init);
+module_exit(adx_wdt_exit);
+
+MODULE_DESCRIPTION("Avionic Design Xanthos Watchdog Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c
index a9592d9..6c4269b 100644
--- a/drivers/xen/xenfs/xenbus.c
+++ b/drivers/xen/xenfs/xenbus.c
@@ -43,6 +43,7 @@
 #include <linux/fs.h>
 #include <linux/poll.h>
 #include <linux/mutex.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/mount.h>
 #include <linux/pagemap.h>
diff --git a/firmware/Makefile b/firmware/Makefile
index f4ca0c7..6d5c3ab 100644
--- a/firmware/Makefile
+++ b/firmware/Makefile
@@ -32,7 +32,7 @@
 					 adaptec/starfire_tx.bin
 fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
 fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
-fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.0.21.0.fw bnx2x-e1h-5.0.21.0.fw
+fw-shipped-$(CONFIG_BNX2X) += bnx2x-e1-5.2.7.0.fw bnx2x-e1h-5.2.7.0.fw
 fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-5.0.0.j3.fw \
 			     bnx2/bnx2-rv2p-09-5.0.0.j3.fw \
 			     bnx2/bnx2-rv2p-09ax-5.0.0.j3.fw \
diff --git a/firmware/WHENCE b/firmware/WHENCE
index 7a8adc0..34b5d0a 100644
--- a/firmware/WHENCE
+++ b/firmware/WHENCE
@@ -678,8 +678,8 @@
 
 Driver: bnx2x: Broadcom Everest
 
-File: bnx2x-e1-4.8.53.0.fw.ihex
-File: bnx2x-e1h-4.8.53.0.fw.ihex
+File: bnx2x-e1-5.2.7.0.fw.ihex
+File: bnx2x-e1h-5.2.7.0.fw.ihex
 
 License:
   Copyright (c) 2007-2009 Broadcom Corporation
diff --git a/firmware/bnx2x-e1-5.0.21.0.fw.ihex b/firmware/bnx2x-e1-5.0.21.0.fw.ihex
deleted file mode 100644
index c51afd4..0000000
--- a/firmware/bnx2x-e1-5.0.21.0.fw.ihex
+++ /dev/null
@@ -1,10184 +0,0 @@
-:10000000000028B0000000600000068800002918E9
-:100010000000161400002FA800000098000045C042
-:100020000000738800004660000000CC0000B9F0BA
-:1000300000009A4C0000BAC0000000940001551066
-:10004000000057B8000155A8000000B80001AD68D5
-:100050000000CE1C0001AE280000000400027C4815
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000060400CC0000000418
-:10010000020400DC00100000020400E012140000F1
-:10011000020400E422140000020400E8321400008B
-:10012000060400EC000000040104012400000000AB
-:1001300001040128000000000104012C000000005F
-:10014000010401300000000002040004000000FF70
-:1001500002040008000000FF0204000C000000FF81
-:1001600002040010000000FF02040014000000FF61
-:1001700002040018000000FF0204001C000000FF41
-:1001800002040020000000FF020400240000003EE2
-:1001900002040028000000000204002C0000003FC0
-:1001A000020400300000003F020400340000003F61
-:1001B00002040038000000000204003C0000003F80
-:1001C000020400400000003F020400440000003F21
-:1001D00002042008000004110204200C00000400A6
-:1001E000020420100000040402042014000004197A
-:1001F0000204201C0000FFFF020420200000FFFF7B
-:10020000020420240000FFFF020420280000FFFF5A
-:1002100006042038000000020204204000000034E0
-:100220000204204400000035060420480000007C41
-:100230000204223807FFFFFF0204223C0000003FB7
-:100240000204224007FFFFFF020422440000000FC7
-:1002500001042248000000000104224C00000000BC
-:10026000010422500000000001042254000000009C
-:1002700001042258000000000104225C000000007C
-:10028000010422600000000001042264000000005C
-:1002900001042268000000000104226C000000003C
-:1002A000010422700000000001042274000000001C
-:1002B00001042278000000000104227C00000000FC
-:1002C000020424BC000000010C042000000003E82C
-:1002D0000A042000000000010B0420000000000AB6
-:1002E0000205004400000020020500480000003222
-:1002F000020500900215002002050094021500205E
-:1003000002050098000000300205009C0810000063
-:10031000020500A000000033020500A40000003028
-:10032000020500A800000031020500AC0000000238
-:10033000020500B000000005020500B40000000640
-:10034000020500B800000002020500BC0000000227
-:10035000020500C000000000020500C40000000506
-:10036000020500C800000002020500CC00000002E7
-:10037000020500D000000002020500D400000001C8
-:1003800002050114000000010205011C000000012B
-:100390000205012000000002020502040000000125
-:1003A0000205020C0000004002050210000000409F
-:1003B0000205021C000000200205022000000013BC
-:1003C0000205022400000020060502400000000A89
-:1003D0000405028000200000020500500000000714
-:1003E0000205005400000007020500580000000844
-:1003F0000205005C00000008060500600000000423
-:10040000020500D800000006020500E00000000D13
-:10041000020500E40000002D020500E800000007CE
-:10042000020500EC00000027020500F000000007B4
-:10043000020500F400000027020500F80000000794
-:10044000020500FC00000027020500040000000176
-:1004500002050008000000010205000C0000000178
-:100460000205001000000001020500140000000158
-:1004700002050018000000010205001C0000000138
-:100480000205002000000001020500240000000118
-:1004900002050028000000010205002C00000001F8
-:1004A00002050030000000010205003400000001D8
-:1004B00002050038000000010205003C00000001B8
-:1004C00002050040000000010406100002000020A8
-:1004D000020600DC00000001010600D80000000058
-:1004E0000406020000030220020600DC00000000F7
-:1004F00002060068000000B802060078000001143F
-:10050000010600B800000000010600C8000000005D
-:100510000206006C000000B80206007C0000011416
-:10052000010600BC00000000010600CC0000000035
-:100530000718040000960000081807600014022342
-:10054000071C000034B80000071C800034E90D2FA0
-:10055000071D000009DD1A6A081D14005D800225D0
-:100560000118000000000000011800040000000055
-:1005700001180008000000000118000C0000000035
-:100580000118001000000000011800140000000015
-:1005900002180020000000010218002400000002E0
-:1005A00002180028000000030218002C00000000C0
-:1005B000021800300000000402180034000000019E
-:1005C00002180038000000000218003C0000000182
-:1005D000021800400000000402180044000000005F
-:1005E00002180048000000010218004C000000033F
-:1005F0000218005000000000021800540000000122
-:1006000002180058000000040218005C00000000FE
-:1006100002180060000000010218006400000003DE
-:1006200002180068000000000218006C00000001C1
-:10063000021800700000000402180074000000009E
-:1006400002180078000000040218007C000000037B
-:100650000618008000000002021800A400003FFFFE
-:10066000021800A8000003FF021802240000000086
-:1006700002180234000000000218024C00000000C2
-:10068000021802E4000000FF061810000000040039
-:10069000021B8BC000000001021B80000000003420
-:1006A000021B804000000018021B80800000000C2C
-:1006B000021B80C0000000200C1B83000007A1204B
-:1006C0000A1B8300000001380B1B83000000138805
-:1006D000021B83C0000001F4061A2000000000B2D3
-:1006E000061A23C800000181041A29CC0001022740
-:1006F000061A1020000000C8061A100000000002B0
-:10070000061A1E3800000002061A1E300000000201
-:10071000061A080000000002061A0808000000027D
-:10072000061A081000000004041A1FB00005022871
-:10073000041A4CB00008022D061A22C8000000203E
-:10074000061A400000000124021A4920000000009F
-:10075000061A14000000000A061A145000000006D1
-:10076000061A150000000002041A150800050235DB
-:10077000061A151C00000009061A15800000001456
-:10078000061A09C000000048061A0800000000020E
-:10079000061A08200000000E041A1FB00002023AD8
-:1007A000061A2C2800000002061A23480000002028
-:1007B000061A449000000124021A49240000000097
-:1007C000061A14280000000A061A14680000000621
-:1007D000061A154000000002041A15480005023CE4
-:1007E000061A155C00000009061A15D00000001456
-:1007F000061A0AE000000048061A08080000000275
-:10080000061A08580000000E041A1FB80002024120
-:10081000061A2C30000000020200A2800000000135
-:100820000200A294071D29110200A29800000000F6
-:100830000200A29C009C04240200A2A00000000070
-:100840000200A2A4000002090200A4FCFF000000B4
-:10085000020100B400000001020100B80000000124
-:10086000020100DC000000010201010000000001A3
-:1008700002010104000000010201007C00300000C0
-:1008800002010084000000280201008C000000002A
-:1008900002010130000000040201025C00000001BE
-:1008A000020103280000000002010554000000308E
-:1008B000020100C400000001020100CC00000001A0
-:1008C000020100F800000001020100F00000000138
-:1008D00002010080003000000201008800000028B2
-:1008E0000201009000000000020101340000000439
-:1008F000020102DC000000010201032C00000000E4
-:100900000201056400000030020100C8000000017F
-:10091000020100D000000001020100FC0000000103
-:10092000020100F400000001020C10000000002091
-:10093000020C200800000A11020C200C00000A0022
-:10094000020C201000000A04020C201C0000FFFF13
-:10095000020C20200000FFFF020C20240000FFFFFB
-:10096000020C20280000FFFF060C203800000002C7
-:10097000020C204000000034020C2044000000352E
-:10098000020C204800000020020C204C0000002136
-:10099000020C205000000022020C20540000002312
-:1009A000020C205800000024020C205C00000025EE
-:1009B000020C206000000026020C206400000027CA
-:1009C000020C206800000028020C206C00000029A6
-:1009D000020C20700000002A020C20740000002B82
-:1009E000060C207800000056020C21D00000000107
-:1009F000020C21D400000001020C21D800000001EB
-:100A0000020C21DC00000001020C21E000000001CA
-:100A1000020C21E400000001020C21E800000001AA
-:100A2000020C21EC00000001020C21F0000000018A
-:100A3000020C21F400000001060C21F80000001057
-:100A4000020C223807FFFFFF020C223C0000003F8F
-:100A5000020C224007FFFFFF020C22440000000F9F
-:100A6000010C224800000000010C224C0000000094
-:100A7000010C225000000000010C22540000000074
-:100A8000010C225800000000010C225C0000000054
-:100A9000010C226000000000010C22640000000034
-:100AA000010C226800000000010C226C0000000014
-:100AB000010C227000000000010C227400000000F4
-:100AC000010C227800000000010C227C00000000D4
-:100AD000020C24BC000000010C0C2000000003E804
-:100AE0000A0C2000000000010B0C20000000000A8E
-:100AF000020C400800000365020C400C0000035487
-:100B0000020C401000000358020C40140000037552
-:100B1000020C401C0000FFFF020C40200000FFFF01
-:100B2000020C40240000FFFF020C40280000FFFFE1
-:100B3000020C403800000046020C403C000000055A
-:100B4000060C40400000005E020C41B800000001AD
-:100B5000060C41BC0000001F020C423807FFFFFFDB
-:100B6000020C423C0000003F020C424007FFFFFF26
-:100B7000020C42440000000F010C4248000000003B
-:100B8000010C424C00000000010C4250000000002B
-:100B9000010C425400000000010C4258000000000B
-:100BA000010C425C00000000010C426000000000EB
-:100BB000010C426400000000010C426800000000CB
-:100BC000010C426C00000000010C427000000000AB
-:100BD000010C427400000000010C4278000000008B
-:100BE000010C427C00000000010C4280000000006B
-:100BF000020C44C0000000010C0C4000000003E89F
-:100C00000A0C4000000000010B0C40000000000A2C
-:100C1000020D004400000032020D008C021500207D
-:100C2000020D009002150020020D00940810000033
-:100C3000020D009800000033020D009C000000022D
-:100C4000020D00A000000000020D00A4000000053D
-:100C5000020D00A800000005060D00AC0000000217
-:100C6000020D00B400000002020D00B800000003F5
-:100C7000020D00BC00000002020D00C000000001D7
-:100C8000020D00C800000002020D00CC00000002AE
-:100C9000020D010800000001020D015C00000001CE
-:100CA000020D016400000001020D01680000000255
-:100CB000020D020400000001020D020C00000020E1
-:100CC000020D021000000040020D0214000000405E
-:100CD000020D022000000003020D02240000001893
-:100CE000060D028000000012040D030000240243E0
-:100CF000020D004C00000001020D00500000000237
-:100D0000020D005400000008020D00580000000809
-:100D1000060D005C00000004020D00C40000000489
-:100D2000020D011400000009020D01180000002945
-:100D3000020D011C0000000A020D01200000002A23
-:100D4000020D012400000007020D01280000002709
-:100D5000020D012C00000007020D013000000027E9
-:100D6000020D01340000000C020D01380000002CBF
-:100D7000020D013C0000000C020D01400000002C9F
-:100D8000020D01440000000C020D01480000002C7F
-:100D9000020D000400000001020D00080000000127
-:100DA000020D000C00000001020D00100000000107
-:100DB000020D001400000001020D001800000001E7
-:100DC000020D001C00000001020D002000000001C7
-:100DD000020D002400000001020D002800000001A7
-:100DE000020D002C00000001020D00300000000187
-:100DF000020D003400000001020D00380000000167
-:100E0000020D003C00000001020E004C0000003208
-:100E1000020E009402150020020E00980215002018
-:100E2000020E009C00000030020E00A0081000001E
-:100E3000020E00A400000033020E00A800000030E3
-:100E4000020E00AC00000031020E00B000000002F3
-:100E5000020E00B400000004020E00B80000000002
-:100E6000020E00BC00000002020E00C000000002E2
-:100E7000020E00C400000000020E00C800000002C4
-:100E8000020E00CC00000007020E00D0000000029D
-:100E9000020E00D400000002020E00D80000000183
-:100EA000020E00E400000001020E014400000001F7
-:100EB000020E014C00000001020E01500000000271
-:100EC000020E020400000001020E020C00000040AD
-:100ED000020E021000000040020E021C000000047E
-:100EE000020E022000000020020E02240000000E6C
-:100EF000020E02280000001B060E03000000001274
-:100F0000040E0280001B0267020E00540000000C59
-:100F1000020E005800000007020E005C0000000FE7
-:100F2000020E006000000010060E006400000004C5
-:100F3000020E00DC00000003020E01100000000F92
-:100F4000020E01140000002F020E01180000000E16
-:100F5000020E011C0000002E020E00040000000121
-:100F6000020E000800000001020E000C000000014B
-:100F7000020E001000000001020E0014000000012B
-:100F8000020E001800000001020E001C000000010B
-:100F9000020E002000000001020E002400000001EB
-:100FA000020E002800000001020E002C00000001CB
-:100FB000020E003000000001020E003400000001AB
-:100FC000020E003800000001020E003C000000018B
-:100FD000020E004000000001020E0044000000016B
-:100FE0000730040000C900000830076800130282BF
-:100FF00007340000341200000734800037B70D05B5
-:10100000073500002E7D1AF308356F405218028410
-:10101000013000000000000001300004000000006A
-:1010200001300008000000000130000C000000004A
-:10103000013000100000000001300014000000002A
-:1010400002300020000000010230002400000002F5
-:1010500002300028000000030230002C00000000D5
-:1010600002300030000000040230003400000001B3
-:1010700002300038000000000230003C0000000197
-:101080000230004000000004023000440000000074
-:1010900002300048000000010230004C0000000354
-:1010A0000230005000000000023000540000000137
-:1010B00002300058000000040230005C0000000014
-:1010C00002300060000000010230006400000003F4
-:1010D00002300068000000000230006C00000001D7
-:1010E00002300070000000040230007400000000B4
-:1010F00002300078000000040230007C0000000391
-:101100000630008000000002023000A400003FFF13
-:10111000023000A8000003FF02300224000000009B
-:1011200002300234000000000230024C00000000D7
-:10113000023002E40000FFFF06302000000008003B
-:1011400002338BC000000001023380000000001A4F
-:10115000023380400000004E023380800000001007
-:10116000023380C0000000200C3383000007A12060
-:101170000A338300000001380B338300000013881A
-:10118000023383C0000001F40C3383801DCD650061
-:101190000A3383800004C4B40B338380004C4B407B
-:1011A00006321AA0000000C206321020000000C85B
-:1011B0000632100000000002063214000000004059
-:1011C00006325098000000040632508000000005EE
-:1011D00004325094000102860632500000000020C4
-:1011E00004322830000202870233080001000000A8
-:1011F00004330C00001002890233080000000000D4
-:1012000004330C400010029906321500000000B4AF
-:1012100002321DC80000000006324000000000D865
-:10122000063217D0000000B402321DCC00000000CE
-:1012300006324360000000D807200400009200003E
-:1012400008200780001002A9072400002CCF00000E
-:10125000072480002AE50B340824DC6062DA02AB44
-:101260000120000000000000012000040000000038
-:1012700001200008000000000120000C0000000018
-:1012800001200010000000000120001400000000F8
-:1012900002200020000000010220002400000002C3
-:1012A00002200028000000030220002C00000000A3
-:1012B0000220003000000004022000340000000181
-:1012C00002200038000000000220003C0000000165
-:1012D0000220004000000004022000440000000042
-:1012E00002200048000000010220004C0000000322
-:1012F0000220005000000000022000540000000105
-:1013000002200058000000040220005C00000000E1
-:1013100002200060000000010220006400000003C1
-:1013200002200068000000000220006C00000001A4
-:101330000220007000000004022000740000000081
-:1013400002200078000000040220007C000000035E
-:101350000620008000000002022000A400003FFFE1
-:10136000022000A8000003FF022002240000000069
-:1013700002200234000000000220024C00000000A5
-:10138000022002E40000FFFF062020000000080009
-:1013900002238BC000000001022380000000001027
-:1013A00002238040000000120223808000000030F1
-:1013B000022380C00000000E022383C0000001F45D
-:1013C000062250000000004206221020000000C843
-:1013D000062210000000000206222000000000C0CB
-:1013E000062225C00000024004222EC8000802ADDB
-:1013F00002230800013FFFFF04230C00001002B588
-:10140000022308000000000004230C40001002C565
-:1014100006223040000000A00622354000000010E7
-:10142000062236C000000030062240000000020004
-:10143000062235C00000002006223840000000309F
-:1014400006223000000000080222511800000000AF
-:10145000062223000000000E0622241000000030A7
-:10146000062232C0000000A00622358000000010D5
-:1014700006223780000000300622480000000200EB
-:10148000062236400000002006223900000000300D
-:1014900006223020000000080222511C000000003B
-:1014A000062223380000000E062224D0000000305F
-:1014B00002161000000000280217000800000002B9
-:1014C0000217002C000000030217003C000000047B
-:1014D0000217004400000008021700480000000244
-:1014E0000217004C0000009002170050000000900E
-:1014F00002170054008000900217005808140000E2
-:10150000021700600000008A0217006400000080DB
-:1015100002170068000000810217006C00000080C4
-:10152000021700700000000602170078000007D0C4
-:101530000217007C0000076C02170038007C1004C2
-:10154000021700040000000F0616402400000002ED
-:10155000021640700000001C021642080000000144
-:101560000216421000000001021642200000000195
-:10157000021642280000000102164230000000015D
-:10158000021642380000000102164260000000010D
-:101590000C16401C0003D0900A16401C0000009C52
-:1015A0000B16401C000009C4021640300000000861
-:1015B000021640340000000C0216403800000010F3
-:1015C0000216404400000020021640000000000106
-:1015D000021640D800000001021640080000000179
-:1015E0000216400C0000000102164010000000012D
-:1015F00002164240000000000216424800000000AF
-:101600000616427000000002021642500000000060
-:101610000216425800000000061642800000000238
-:1016200002166008000006140216600C0000060096
-:1016300002166010000006040216601C0000FFFF86
-:10164000021660200000FFFF021660240000FFFF6A
-:10165000021660280000FFFF02166038000000201C
-:101660000216603C000000200216604000000034BA
-:101670000216604400000035021660480000002396
-:101680000216604C00000024021660500000002585
-:101690000216605400000026021660580000002761
-:1016A0000216605C00000029021660600000002A3B
-:1016B000021660640000002B021660680000002C17
-:1016C0000216606C0000002D0616607000000052CB
-:1016D000021661B800000001061661BC0000001F80
-:1016E0000216623807FFFFFF0216623C0000003F4F
-:1016F0000216624007FFFFFF021662440000000F5F
-:1017000001166248000000000116624C0000000053
-:101710000116625000000000011662540000000033
-:1017200001166258000000000116625C0000000013
-:1017300001166260000000000116626400000000F3
-:1017400001166268000000000116626C00000000D3
-:1017500001166270000000000116627400000000B3
-:1017600001166278000000000116627C0000000093
-:10177000021664BC000000010C166000000003E8C3
-:101780000A166000000000010B1660000000000A4D
-:10179000021680400000000602168044000000058A
-:1017A000021680480000000A0216804C0000000566
-:1017B0000216805400000002021680CC00000004D3
-:1017C000021680D000000004021680D4000000043D
-:1017D000021680D800000004021680DC000000041D
-:1017E000021680E000000004021680E400000004FD
-:1017F000021680E8000000040216880400000004BD
-:10180000021680300000007C021680340000003D8B
-:10181000021680380000003F0216803C0000009C49
-:10182000021680F000000007061680F40000000594
-:101830000216880C01010101021681080000000057
-:101840000216810C00000004021681100000000442
-:1018500002168114000000020216881008012004FC
-:1018600002168118000000050216811C0000000508
-:1018700002168120000000050216812400000005E8
-:101880000216882C2008100102168128000000088A
-:101890000216812C000000060216813000000007AD
-:1018A0000216813400000000021688300101012078
-:1018B0000616813800000004021688340101010177
-:1018C0000616814800000004021688380101010153
-:1018D00006168158000000040216883C010101012F
-:1018E00006168168000000030216817400000001E2
-:1018F00002168840010101010216817800000001F2
-:101900000216817C000000010216818000000001A7
-:1019100002168184000000010216884401010101C1
-:1019200002168188000000010216818C000000046C
-:10193000021681900000000402168194000000024B
-:10194000021688480801200402168198000000054C
-:101950000216819C00000005021681A0000000050F
-:10196000021681A400000005021688142008100148
-:10197000021681A800000008021681AC00000006D3
-:10198000021681B000000007021681B400000001B9
-:101990000216881801010120021681B8000000011A
-:1019A000021681BC00000001021681C00000000187
-:1019B000021681C4000000010216881C0101010109
-:1019C000021681C800000001021681CC000000014F
-:1019D000021681D000000001021681D4000000012F
-:1019E0000216882001010101021681D800000001C1
-:1019F000021681DC00000001021681E000000001F7
-:101A0000021681E400000001021688240101010190
-:101A1000021681E800000001021681EC00000001BE
-:101A2000021681F000000001021688280101010160
-:101A300002168240FFFF003F0616824400000002AB
-:101A40000216824CFFFF003F021682500000010088
-:101A5000021682540000010006168258000000029F
-:101A600002168260000000C002168264000000C0FE
-:101A70000216826800001E000216826C00001E0022
-:101A800002168270000040000216827400004000BE
-:101A900002168278000080000216827C000080001E
-:101AA00002168280000020000216828400002000BE
-:101AB0000616828800000007021682A400000001BA
-:101AC000061682A80000000A021681F400000C0825
-:101AD000021681F800000040021681FC000001009F
-:101AE0000216820000000020021682040000001787
-:101AF00002168208000000800216820C000002001C
-:101B0000021682100000000002168218FFFF01FF7B
-:101B100002168214FFFF01FF0216823C0000001330
-:101B2000021680900000013F021680600000014014
-:101B30000216806400000140061680680000000262
-:101B400002168070000000C00616807400000007B6
-:101B50000216809C00000048021680A00000004889
-:101B6000061680A400000002021680AC00000048A7
-:101B7000061680B0000000070216823800008000C0
-:101B800002168234000025E40216809400007FFFD4
-:101B900002168220000000070216821C00000007C7
-:101BA000021682280000000002168224FFFFFFFFB9
-:101BB00002168230000000000216822CFFFFFFFF99
-:101BC000021680EC000000FF02140000000000017B
-:101BD0000214000C0000000102140040000000018B
-:101BE0000214004400007FFF0214000C00000000FB
-:101BF00002140000000000000214006C000000004D
-:101C00000214000400000001021400300000000172
-:101C100002140004000000000214005C0000000038
-:101C2000021400080000000102140034000000014A
-:101C30000214000800000000021400600000000010
-:101C40000202005800000032020200A0031500202A
-:101C5000020200A403150020020200A801000030C7
-:101C6000020200AC08100000020200B000000033C5
-:101C7000020200B400000030020200B8000000318F
-:101C8000020200BC00000003020200C000000006C7
-:101C9000020200C400000003020200C800000003AA
-:101CA000020200CC00000002020200D0000000008E
-:101CB000020200D400000002020200DC000000006A
-:101CC000020200E000000006020200E4000000043E
-:101CD000020200E800000002020200EC0000000224
-:101CE000020200F000000001020200FC00000006F9
-:101CF0000202012000000000020201340000000284
-:101D0000020201B0000000010202020C000000010A
-:101D10000202021400000001020202180000000288
-:101D200002020404000000010202040C0000004052
-:101D300002020410000000400202041C0000000423
-:101D4000020204200000002002020424000000021D
-:101D5000020204280000001F060205000000001215
-:101D600004020480001F02D5020200600000000F80
-:101D70000202006400000007020200680000000B7D
-:101D80000202006C0000000E060200700000000459
-:101D9000020200F40000000402020004000000013E
-:101DA00002020008000000010202000C0000000115
-:101DB00002020010000000010202001400000001F5
-:101DC00002020018000000010202001C00000001D5
-:101DD00002020020000000010202002400000001B5
-:101DE00002020028000000010202002C0000000195
-:101DF0000202003000000001020200340000000175
-:101E000002020038000000010202003C0000000154
-:101E10000202004000000001020200440000000134
-:101E200002020048000000010202004C0000000114
-:101E3000020200500000000102020108000000C878
-:101E40000202011800000002020201C400000000AA
-:101E5000020201CC00000000020201D400000002D6
-:101E6000020201DC00000002020201E4000000FFA7
-:101E7000020201EC000000FF0202010C000000C899
-:101E80000202011C00000002020201C80000000062
-:101E9000020201D000000000020201D8000000028E
-:101EA000020201E000000002020201E8000000FF5F
-:101EB000020201F0000000FF0728040000B4000047
-:101EC00008280768001302F4072C000035D700002B
-:101ED000072C80003A590D76072D00003B741C0D2D
-:101EE000072D8000226C2AEB082DC6F0472202F64F
-:101EF000012800000000000001280004000000008C
-:101F000001280008000000000128000C000000006B
-:101F1000012800100000000001280014000000004B
-:101F20000228002000000001022800240000000216
-:101F300002280028000000030228002C00000000F6
-:101F400002280030000000040228003400000001D4
-:101F500002280038000000000228003C00000001B8
-:101F60000228004000000004022800440000000095
-:101F700002280048000000010228004C0000000375
-:101F80000228005000000000022800540000000158
-:101F900002280058000000040228005C0000000035
-:101FA0000228006000000001022800640000000315
-:101FB00002280068000000000228006C00000001F8
-:101FC00002280070000000040228007400000000D5
-:101FD00002280078000000040228007C00000003B2
-:101FE0000628008000000002022800A400003FFF35
-:101FF000022800A8000003FF0228022400000000BD
-:1020000002280234000000000228024C00000000F8
-:10201000022802E40000FFFF06282000000008005C
-:10202000022B8BC000000001022B8000000000008A
-:10203000022B804000000018022B80800000000C62
-:10204000022B80C0000000660C2B83000007A1203B
-:102050000A2B8300000001380B2B8300000013883B
-:10206000022B83C0000001F40C2B8340000001F41C
-:102070000A2B8340000000000B2B8340000000056A
-:102080000A2B83800004C4B40C2B83801DCD650013
-:102090000B2B8380004C4B40062A3C400000000480
-:1020A000042A3C50000202F8062A300000000048D2
-:1020B000062A1020000000C8062A100000000002B6
-:1020C000062A31280000008E022A33680000000032
-:1020D000042A3370000202FA042A3A70000402FC57
-:1020E000042A3D0000020300042A15000002030236
-:1020F000062A150800000100022A197000000000DD
-:10210000022A197800000000042A19600002030462
-:10211000062A4AC000000002062A4B000000000404
-:10212000042A1F4800020306022B080000000000DA
-:10213000042B0C0000100308022B08000100000013
-:10214000042B0C4000080318022B080002000000BA
-:10215000042B0C6000080320062A3A8000000014BB
-:10216000062A3B2000000024062A14000000000A72
-:10217000062A145000000006062A3378000000D812
-:10218000022A3A3800000000042A3C5800020328C2
-:10219000042A3C680010032A062A5020000000028E
-:1021A000062A503000000002062A500000000002FB
-:1021B000062A501000000002022A504000000000D1
-:1021C000062A50480000000E022A50B80000000104
-:1021D000042A4AC80002033A062A4B1000000042B3
-:1021E000062A4D2000000004062A3AD00000001400
-:1021F000062A3BB000000024062A14280000000A2A
-:10220000062A146800000006062A36D8000000D806
-:10221000022A3A3C00000000042A3C600002033C11
-:10222000042A3CA80010033E062A502800000002A1
-:10223000062A503800000002062A5008000000025A
-:10224000062A501800000002022A50440000000034
-:10225000062A50800000000E022A50BC0000000137
-:10226000042A4AD00002034E062A4C1800000042FD
-:10227000062A4D3000000004021010080000000182
-:102280000210101000000264021010000003D000C1
-:10229000021010040000003D091018000200035055
-:1022A00009101100002005500610118000000002E6
-:1022B0000910118800060570061011A00000001812
-:1022C000021010100000000006102400000000E0C2
-:1022D0000210201C0000000002102020000000015D
-:1022E000021020C0000000010210200400000001C4
-:1022F000021020080000000109103C0000050576CE
-:1023000009103C200005057B0910380000050580F8
-:1023100002104028000000100210404400003FFF5F
-:102320000210405800280000021040840084924AA5
-:1023300002104058000000000610806800000004F1
-:1023400002108000000010800610802800000002AB
-:102350000210803800000010021080400000FFFFD3
-:10236000021080440000FFFF0210805000000000B7
-:102370000210810000000000061081200000000211
-:1023800002108008000002B502108010000000005A
-:10239000061082000000004A021081080001FFFFC1
-:1023A00006108140000000020210800000001A8028
-:1023B0000610900000000024061091200000004A42
-:1023C000061093700000004A061095C00000004AF5
-:1023D000021080040000108006108030000000020F
-:1023E0000210803C00000010021080480000FFFF37
-:1023F0000210804C0000FFFF02108054000000001B
-:102400000210810400000000061081280000000274
-:102410000210800C000002B50210801400000000C1
-:10242000061084000000004A0210810C0001FFFF2A
-:1024300006108148000000020210800400001A808B
-:102440000610909000000024061092480000004AF8
-:10245000061094980000004A061096E80000004A12
-:102460000212049000E383400212051400003C10A5
-:10247000021205200000000202120494FFFFFFFF79
-:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
-:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
-:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
-:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
-:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
-:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
-:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
-:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
-:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
-:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
-:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
-:10253000021204FCFFFFFFFF02120500FFFFFFFF76
-:1025400002120504FFFFFFFF02120508FFFFFFFF55
-:102550000212050CFFFFFFFF02120510FFFFFFFF35
-:10256000021204D4FFFF3330021204D8FFFF3340BD
-:10257000021204B4F00030000212039000000008C0
-:102580000212039C00000008061203A000000002D3
-:10259000021203BC00000004021203C40000000485
-:1025A000021203D000000000021203DC0000000051
-:1025B0000212036C00000001021203680000003FD9
-:1025C000021201BC00000040021201C00000180805
-:1025D000021201C400000803021201C8000008032F
-:1025E000021201CC00000040021201D000000003E2
-:1025F000021201D400000803021201D800000803EF
-:10260000021201DC00000803021201E000010003D5
-:10261000021201E400000803021201E800000803AE
-:10262000021201EC00000003021201F0000000039E
-:10263000021201F400000003021201F8000000037E
-:10264000021201FC0000000302120200000000035D
-:10265000021202040000000302120208000000033C
-:102660000212020C0000000302120210000000031C
-:1026700002120214000000030212021800000003FC
-:102680000212021C000000030212022000000003DC
-:102690000212022400000003021202280000240398
-:1026A0000212022C0000002F02120230000000096A
-:1026B00002120234000000190212023800000184E4
-:1026C0000212023C000001830212024000000306D5
-:1026D0000212024400000019021202480000000623
-:1026E0000212024C00000306021202500000030610
-:1026F00002120254000003060212025800000C8667
-:102700000212025C000003060212026000000306CF
-:1027100002120264000000060212026800000006B5
-:102720000212026C00000006021202700000000695
-:102730000212027400000006021202780000000675
-:102740000212027C00000006021202800000000655
-:102750000212028400000006021202880000000635
-:102760000212028C00000006021202900000000615
-:1027700002120294000000060212029800000006F5
-:102780000212029C00000006021202A000000306D2
-:10279000021202A400000013021202A800000006A8
-:1027A000021202B000001004021202B40000100471
-:1027B0000212032400106440021203280010644037
-:1027C000021201B0000000010600A0000000001687
-:1027D0000200A06CBF5C00000200A070FFF51FEFBC
-:1027E0000200A0740000FFFF0200A078500003E088
-:1027F0000200A07C000000000200A0800000A000F9
-:102800000600A084000000050200A0980FE0000070
-:102810000600A09C000000140200A0EC555400002B
-:102820000200A0F0555555550200A0F40000555582
-:102830000200A0F8000000000200A0FC55540000B7
-:102840000200A100555555550200A1040000555540
-:102850000200A108000000000200A22C00000000FD
-:102860000600A230000000030200A0600000000784
-:102870000200A10CBF5C00000200A110FFF51FEFD9
-:102880000200A1140000FFFF0200A118500003E0A5
-:102890000200A11C000000000200A1200000A00016
-:1028A0000600A124000000050200A1380FE000008E
-:1028B0000600A13C000000140200A18C5554000049
-:1028C0000200A190555555550200A19400005555A0
-:1028D0000200A198000000000200A19C55540000D5
-:1028E0000200A1A0555555550200A1A40000555560
-:1028F0000200A1A8000000000200A23C00000000AD
-:102900000600A240000000030200A06400000007CF
-:1029100000000000000000000000002E0000000089
-:1029200000000000000000000000000000000000A7
-:102930000000000000000000000000000000000097
-:102940000000000000000000000000000000000087
-:102950000000000000000000000000000000000077
-:102960000000000000000000000000000000000067
-:10297000002E0050000000000000000000000000D9
-:102980000000000000000000000000000000000047
-:102990000000000000000000000000000050008D5A
-:1029A0000000000000000000000000000000000027
-:1029B0000000000000000000000000000000000017
-:1029C0000000000000000000008D009200920096C0
-:1029D0000096009A000000000000000000000000C7
-:1029E00000000000000000000000000000000000E7
-:1029F00000000000009A00DB00DB00E900E900F7BE
-:102A000000000000000000000000000000000000C6
-:102A100000000000000000000000000000000000B6
-:102A200000000000000000000000000000000000A6
-:102A30000000000000000000000000000000000096
-:102A40000000000000000000000000000000000086
-:102A50000000000000000000000000000000000076
-:102A60000000000000000000000000000000000066
-:102A70000000000000000000000000000000000056
-:102A80000000000000000000000000000000000046
-:102A90000000000000000000000000000000000036
-:102AA0000000000000000000000000000000000026
-:102AB0000000000000000000000000000000000016
-:102AC0000000000000000000000000000000000006
-:102AD00000F700FE00000000000000000000000001
-:102AE00000000000000000000000000000000000E6
-:102AF00000000000000000000000000000000000D6
-:102B000000000000000000000000000000000000C5
-:102B100000000000000000000000000000000000B5
-:102B2000000000000000000000FE01030103010E90
-:102B3000010E01190000000000000000000000006C
-:102B40000000000000000000000000000000000085
-:102B50000000000000000000000000000000000075
-:102B60000000000000000000000000000000000065
-:102B70000000000000000000000000000000000055
-:102B80000119011A00000000000000000000000010
-:102B90000000000000000000000000000000000035
-:102BA000000000000000000000000000011A0152B7
-:102BB0000000000000000000000000000000000015
-:102BC0000000000000000000000000000000000005
-:102BD000000000000000000001520176000000002B
-:102BE00000000000000000000000000000000000E5
-:102BF00000000000000000000000000000000000D5
-:102C000000000000017601B5000000000000000097
-:102C100000000000000000000000000000000000B4
-:102C200000000000000000000000000000000000A4
-:102C300001B501F0000000000000000000000000ED
-:102C40000000000000000000000000000000000084
-:102C500000000000000000000000000001F002354C
-:102C6000023502380238023B00000000000000007C
-:102C70000000000000000000000000000000000054
-:102C80000000000000000000023B02760276028095
-:102C90000280028A00000000000000000000000026
-:102CA0000000000000000000000000000000000024
-:102CB00000000000028A028B0000000000000000FB
-:102CC0000000000000000000000000000000000004
-:102CD00000000000000000000000000000000000F4
-:102CE000028B029D000000000000000000000000B8
-:102CF00000000000000000000000000000000000D4
-:102D0000000000000000000000000000029D02B270
-:102D100002B202B502B502B80000000000000000D7
-:102D200000000000000000000000000000000000A3
-:102D3000000000000000000002B802E600000000F1
-:102D40000000000000000000000000000000000083
-:102D50000000000000000000000000000000000073
-:102D60000000000002E6036D00000000000000000B
-:102D70000000000000000000000000000000000053
-:102D80000000000000000000000000000000000043
-:102D9000036D0374037403780378037C0000000060
-:102DA0000000000000000000000000000000000023
-:102DB000000000000000000000000000037C03BBD6
-:102DC00003BB03C303C303CB0000000000000000EB
-:102DD00000000000000000000000000000000000F3
-:102DE000000000000000000003CB041F041F04319A
-:102DF0000431044300000000000000000000000057
-:102E000000000000000000000000000000000000C2
-:102E1000000000000443044D00000000000000001A
-:102E200000000000000000000000000000000000A2
-:102E30000000000000000000000000000000000092
-:102E4000044D0453000000000000000000000000DA
-:102E50000000000000000000000000000000000072
-:102E600000000000000000000000000004530456B1
-:102E70000000000000000000000000000000000052
-:102E80000000000000000000000000000000000042
-:102E900000000000000000000456045B0000000079
-:102EA0000000000000000000000000000000000022
-:102EB0000000000000000000000000000000000012
-:102EC00000000000045B045C045C046E046E04807B
-:102ED00000000000000000000000000000000000F2
-:102EE00000000000000000000000000000000000E2
-:102EF000048004ED0000000000000000000000005D
-:102F000000000000000000000000000000000000C1
-:102F100000000000000000000000000004ED04EECE
-:102F200004EE050205020516000000000000000086
-:102F30000000000000000000000000000000000091
-:102F40000000000000000000000000000000000081
-:102F50000000000000000000000000000000000071
-:102F60000000000000000000000000000000000061
-:102F70000000000000000000000000000000000051
-:102F80000000000000000000000000000000000041
-:102F90000000000000000000000000000000000031
-:102FA000000000000000000000010000000204C05A
-:102FB0000003098000040E4000051300000617C03E
-:102FC00000071C800008214000092600000A2AC0D2
-:102FD000000B2F80000C3440000D3900000E3DC066
-:102FE000000F42800010474000114C00001250C0FA
-:102FF0000013558000145A4000155F00001663C08E
-:103000000017688000186D4000197200001A76C021
-:10301000001B7B80001C8040001D8500001E89C0B5
-:10302000001F8E8000209340000020000000400020
-:1030300000006000000080000000A0000000C00050
-:103040000000E0000001000000012000000140003D
-:1030500000016000000180000001A0000001C0002C
-:103060000001E00000020000000220000002400019
-:1030700000026000000280000002A0000002C00008
-:103080000002E000000300000003200000034000F5
-:1030900000036000000380000003A0000003C000E4
-:1030A0000003E000000400000004200000044000D1
-:1030B00000046000000480000004A0000004C000C0
-:1030C0000004E000000500000005200000054000AD
-:1030D00000056000000580000005A0000005C0009C
-:1030E0000005E00000060000000620000006400089
-:1030F00000066000000680000006A0000006C00078
-:103100000006E00000070000000720000007400064
-:1031100000076000000780000007A0000007C00053
-:103120000007E00000080000000820000008400040
-:1031300000086000000880000008A0000008C0002F
-:103140000008E0000009000000092000000940001C
-:1031500000096000000980000009A0000009C0000B
-:103160000009E000000A0000000A2000000A4000F8
-:10317000000A6000000A8000000AA000000AC000E7
-:10318000000AE000000B0000000B2000000B4000D4
-:10319000000B6000000B8000000BA000000BC000C3
-:1031A000000BE000000C0000000C2000000C4000B0
-:1031B000000C6000000C8000000CA000000CC0009F
-:1031C000000CE000000D0000000D2000000D40008C
-:1031D000000D6000000D8000000DA000000DC0007B
-:1031E000000DE000000E0000000E2000000E400068
-:1031F000000E6000000E8000000EA000000EC00057
-:10320000000EE000000F0000000F2000000F400043
-:10321000000F6000000F8000000FA000000FC00032
-:10322000000FE0000010000000102000001040001F
-:1032300000106000001080000010A0000010C0000E
-:103240000010E000001100000011200000114000FB
-:1032500000116000001180000011A0000011C000EA
-:103260000011E000001200000012200000124000D7
-:1032700000126000001280000012A0000012C000C6
-:103280000012E000001300000013200000134000B3
-:1032900000136000001380000013A0000013C000A2
-:1032A0000013E0000014000000142000001440008F
-:1032B00000146000001480000014A0000014C0007E
-:1032C0000014E0000015000000152000001540006B
-:1032D00000156000001580000015A0000015C0005A
-:1032E0000015E00000160000001620000016400047
-:1032F00000166000001680000016A0000016C00036
-:103300000016E00000170000001720000017400022
-:1033100000176000001780000017A0000017C00011
-:103320000017E000001800000018200000184000FE
-:1033300000186000001880000018A0000018C000ED
-:103340000018E000001900000019200000194000DA
-:1033500000196000001980000019A0000019C000C9
-:103360000019E000001A0000001A2000001A4000B6
-:10337000001A6000001A8000001AA000001AC000A5
-:10338000001AE000001B0000001B2000001B400092
-:10339000001B6000001B8000001BA000001BC00081
-:1033A000001BE000001C0000001C2000001C40006E
-:1033B000001C6000001C8000001CA000001CC0005D
-:1033C000001CE000001D0000001D2000001D40004A
-:1033D000001D6000001D8000001DA000001DC00039
-:1033E000001DE000001E0000001E2000001E400026
-:1033F000001E6000001E8000001EA000001EC00015
-:10340000001EE000001F0000001F2000001F400001
-:10341000001F6000001F8000001FA000001FC000F0
-:10342000001FE000002000000020200000204000DD
-:1034300000206000002080000020A0000020C000CC
-:103440000020E000002100000021200000214000B9
-:1034500000216000002180000021A0000021C000A8
-:103460000021E00000220000002220000022400095
-:1034700000226000002280000022A0000022C00084
-:103480000022E00000230000002320000023400071
-:1034900000236000002380000023A0000023C00060
-:1034A0000023E0000024000000242000002440004D
-:1034B00000246000002480000024A0000024C0003C
-:1034C0000024E00000250000002520000025400029
-:1034D00000256000002580000025A0000025C00018
-:1034E0000025E00000260000002620000026400005
-:1034F00000266000002680000026A0000026C000F4
-:103500000026E000002700000027200000274000E0
-:1035100000276000002780000027A0000027C000CF
-:103520000027E000002800000028200000284000BC
-:1035300000286000002880000028A0000028C000AB
-:103540000028E00000290000002920000029400098
-:1035500000296000002980000029A0000029C00087
-:103560000029E000002A0000002A2000002A400074
-:10357000002A6000002A8000002AA000002AC00063
-:10358000002AE000002B0000002B2000002B400050
-:10359000002B6000002B8000002BA000002BC0003F
-:1035A000002BE000002C0000002C2000002C40002C
-:1035B000002C6000002C8000002CA000002CC0001B
-:1035C000002CE000002D0000002D2000002D400008
-:1035D000002D6000002D8000002DA000002DC000F7
-:1035E000002DE000002E0000002E2000002E4000E4
-:1035F000002E6000002E8000002EA000002EC000D3
-:10360000002EE000002F0000002F2000002F4000BF
-:10361000002F6000002F8000002FA000002FC000AE
-:10362000002FE0000030000000302000003040009B
-:1036300000306000003080000030A0000030C0008A
-:103640000030E00000310000003120000031400077
-:1036500000316000003180000031A0000031C00066
-:103660000031E00000320000003220000032400053
-:1036700000326000003280000032A0000032C00042
-:103680000032E0000033000000332000003340002F
-:1036900000336000003380000033A0000033C0001E
-:1036A0000033E0000034000000342000003440000B
-:1036B00000346000003480000034A0000034C000FA
-:1036C0000034E000003500000035200000354000E7
-:1036D00000356000003580000035A0000035C000D6
-:1036E0000035E000003600000036200000364000C3
-:1036F00000366000003680000036A0000036C000B2
-:103700000036E0000037000000372000003740009E
-:1037100000376000003780000037A0000037C0008D
-:103720000037E0000038000000382000003840007A
-:1037300000386000003880000038A0000038C00069
-:103740000038E00000390000003920000039400056
-:1037500000396000003980000039A0000039C00045
-:103760000039E000003A0000003A2000003A400032
-:10377000003A6000003A8000003AA000003AC00021
-:10378000003AE000003B0000003B2000003B40000E
-:10379000003B6000003B8000003BA000003BC000FD
-:1037A000003BE000003C0000003C2000003C4000EA
-:1037B000003C6000003C8000003CA000003CC000D9
-:1037C000003CE000003D0000003D2000003D4000C6
-:1037D000003D6000003D8000003DA000003DC000B5
-:1037E000003DE000003E0000003E2000003E4000A2
-:1037F000003E6000003E8000003EA000003EC00091
-:10380000003EE000003F0000003F2000003F40007D
-:10381000003F6000003F8000003FA000003FC0006C
-:10382000003FE000003FE00100000000000001FF59
-:103830000000020000007FF800007FF80000026F27
-:1038400000001500000000010000000300BEBC20C5
-:103850000000000300BEBC2000000001FFFFFFFFCE
-:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
-:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
-:1038800000000000FFFFFFFF00000000FFFFFFFF40
-:103890000000000300BEBC20FFFFFFFF000000008F
-:1038A000FFFFFFFF00000000FFFFFFFF000000031D
-:1038B00000BEBC2000002000000040C0000061806D
-:1038C000000082400000A3000000C3C00000E480AC
-:1038D0000001054000012600000146C0000167808C
-:1038E000000188400001A9000001C9C00001EA8070
-:1038F00000020B4000022C0000024CC000026D8050
-:1039000000028E400002AF000002CFC00002F08033
-:103910000003114000033200000352C00003738013
-:10392000000394400003B5000003D5C00003F680F7
-:103930000004174000043800000458C000047980D7
-:1039400000049A400000800000010380000187000D
-:1039500000020A8000028E0000031180000395001F
-:103960000004188000049C0000051F800005A300CF
-:10397000000626800006AA0000072D800007B1007F
-:10398000000834800008B80000093B800009BF002F
-:10399000000A4280000AC600000B4980000BCD00DF
-:1039A000000C5080000CD400000D5780000DDB008F
-:1039B00000007FF800007FF800000174000015008F
-:1039C0000000190000000000FFFFFFFF40000000A2
-:1039D00040000000400000004000000040000000E7
-:1039E00040000000400000004000000040000000D7
-:1039F00040000000400000004000000040000000C7
-:103A000040000000400000004000000040000000B6
-:103A100040000000400000004000000040000000A6
-:103A20004000000040000000400000004000000096
-:103A30004000000040000000400000004000000086
-:103A400040000000400000004000000000007FF83F
-:103A500000007FF80000050900003500FFFFFFFFB0
-:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
-:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
-:103A80004000000040000000400000004000000036
-:103A90004000000040000000400000004000000026
-:103AA0004000000040000000400000004000000016
-:103AB0004000000040000000400000004000000006
-:103AC00040000000400000004000000040000000F6
-:103AD00040000000400000004000000040000000E6
-:103AE00040000000400000004000000040000000D6
-:103AF00040000000400000004000000000001000F6
-:103B000000002080000031000000418000005200D1
-:103B100000006280000073000000838000009400B9
-:103B20000000A4800000B5000000C5800000D600A1
-:103B30000000E6800000F700000107800001180087
-:103B400000012880000139000001498000015A006D
-:103B500000016A8000017B0000018B8000019C0055
-:103B60000001AC800001BD000001CD800001DE003D
-:103B70000001EE800001FF0000007FF800007FF8E8
-:103B8000000004480000150010000000000028ADEF
-:103B9000000000000001000100150005CCCCCCC1E4
-:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
-:103BB0000000000000000001CCCC0201CCCCCCCC39
-:103BC00000000000FFFFFFFF400000004000000079
-:103BD00040000000400000004000000040000000E5
-:103BE00040000000400000004000000040000000D5
-:103BF00040000000400000004000000040000000C5
-:103C000040000000400000004000000040000000B4
-:103C100040000000400000004000000040000000A4
-:103C20004000000040000000400000004000000094
-:103C30004000000040000000400000004000000084
-:103C40004000000040000000000E01B7011600D641
-:103C50000000FFFF000000000000FFFF0000000068
-:103C60000000FFFF000000000000FFFF0000000058
-:103C70000000FFFF000000000000FFFF0000000048
-:103C80000000FFFF000000000000FFFF0000000038
-:103C90000010000000000000007201BB012300F3CF
-:103CA0000000FFFF000000000000FFFF0000000018
-:103CB0000000FFFF000000000000FFFF0000000008
-:103CC0000000FFFF000000000000FFFF00000000F8
-:103CD0000000FFFF000000000000FFFF00000000E8
-:103CE0000010000000000000FFFFFFF3318FFFFF16
-:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
-:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
-:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
-:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
-:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
-:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
-:103D50000C30C305C30C30C3CF300014F3CF3CF399
-:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
-:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
-:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
-:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
-:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
-:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
-:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
-:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
-:103DE0000040CF3CCDCDCDCDFFFFFFF3310FFFFF26
-:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
-:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
-:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
-:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
-:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
-:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
-:103E50000C30C305C30C30C3CF300014F3CF3CF398
-:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
-:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
-:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
-:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
-:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
-:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
-:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
-:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
-:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
-:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
-:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
-:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
-:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
-:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
-:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
-:103F50000C30C305C30C30C3CF300014F3CF3CF397
-:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
-:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
-:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
-:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
-:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
-:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
-:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
-:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
-:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
-:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
-:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
-:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
-:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
-:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
-:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
-:104050000C30C305C30C30C3CF300014F3CF3CF396
-:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
-:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
-:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
-:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
-:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
-:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
-:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
-:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
-:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
-:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
-:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
-:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
-:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
-:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
-:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
-:104150000C30C305C30C30C3CF300014F3CF3CF395
-:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
-:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
-:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
-:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
-:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
-:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
-:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
-:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
-:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
-:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
-:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
-:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
-:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
-:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
-:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
-:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
-:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
-:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
-:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
-:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
-:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
-:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
-:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
-:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
-:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
-:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
-:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
-:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
-:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
-:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
-:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
-:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
-:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
-:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
-:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
-:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
-:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
-:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
-:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
-:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
-:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
-:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
-:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
-:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
-:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
-:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
-:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
-:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
-:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
-:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
-:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
-:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
-:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
-:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
-:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
-:1044E0000040CF3CCDCDCDCD000C0000000700C07A
-:1044F00000028130000B81580002021000010230DE
-:10450000000F024000010330000800000008008096
-:1045100000028100000B8128000201E0000102007E
-:104520000007021000020280000F0000000800F0E7
-:1045300000028170000B819800020250000102709D
-:10454000000B828000080338001000000008010002
-:1045500000028180000B81A80002026000018280BD
-:10456000000E82980008038000028000000B802863
-:10457000000200E0000101000000811000000118AD
-:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
-:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
-:1045B000CCCCCCCCCCCCCCCC00002000000000007B
-:1045C0001F8B080000000000000BFB51CFC0F00360
-:1045D0008A7BD81818367020F843015F646260B88F
-:1045E0000CC45781588099812198918121849178B8
-:1045F000FD49A208F62B210606316106866841A016
-:10460000B9C208F1A3403556220C0C7FA1628D403F
-:10461000369B2875DC3FD0789314A6D87A09047BA2
-:1046200033167964BC054D9E4F1295BF9580FE816F
-:10463000C68F1551F9620A103A1F2AFE044D5E1CFE
-:104640002A7F19EAAFA78AD8CDBD02950700C8E92D
-:10465000674460030000000000000000000000004C
-:104660001F8B080000000000000BED7D0B7854D577
-:10467000B5F03E73CE9C9949662627214F1E6112E4
-:1046800020828638BC0228BD4E0844AC5C0DF8423E
-:104690008B3ABC43DE50B4B4B55F2610224F6FF0A6
-:1046A00047452FD8E161458B3660A4D1021D4010EB
-:1046B0007BBDB7C1528BD5FA4554500C24728BD2B6
-:1046C0005B7BFDD75A7BEFCC39930960FFF6FEF791
-:1046D000BFDF1F3FBFC33E673FD65EAFBDD6DA6BBD
-:1046E000EFB1B334A60F64EC6BFCBB81B11A1B6352
-:1046F000F0AAFBF9949DDD5FEA662C6FA36FB93BCE
-:1047000015DEB7E6EC4AF43196B577BD3211DE67B7
-:104710006D6A5266E747DB8F76C1C731F0BE75BD63
-:104720005204EFB3DE6C5266E1D361636D509F6952
-:10473000BE24864F16602C9DB141E398F80BB8B3A8
-:104740000A19EB8FFF842ECE1B89D01963392B6C8D
-:10475000E19002EF8365539997B16D0057560AB403
-:1047600053BF3A60C7BAB5DAC97627634ECDA97D83
-:104770009DCB58F60C6663F01CB894BFC7BFAFE181
-:10478000FF9C90B53C8899CA3958F6A49E8221991D
-:104790008779BE56E3C1DBA5970E8FCE533E37D542
-:1047A000F9D2DD5ACFF7F2B978D127FAC3D0FA6936
-:1047B000AC3798B1704CFDAA90AEB16BE1090868B6
-:1047C000CEEFD97E2A2B2A443ADCC726D2B346F351
-:1047D000DD8578A9396A672180BBA6F65409965908
-:1047E000ABC286E4F46C3F9CD9891E454CD14EE1A6
-:1047F0007CBDCC8BF3532B7D4F94009EE726062681
-:1048000061BFEB1283F494EF33674FC90C023CC5D0
-:104810000BF2430CE87E7EA3E27740F3D34A58B70D
-:10482000033D2A6EAF2DB811EAFD560FDE8CED2A3E
-:1048300067B41D217AB0DA3CC4539BCEF967606B34
-:10484000D1A71AD00D582C9494827461ECA4890ECF
-:10485000F87772A828ABBDE3F172CFB9D88F86BDC7
-:104860008469BEF27D4EE8E8A0C131E3B14282879F
-:1048700031E471D6AEC4A3EBC0578A8E6A05BD8FF2
-:10488000F7F79F4788CB21E00EE95BE5D1C3CB80EA
-:10489000BEC52FDB2337003DAAB6286107946DFB08
-:1048A0005D01A4CFB9ED5006BA443C3AD53F6B3810
-:1048B000A95CE3687BE47A2877BDACB2ADD8EDD0D3
-:1048C000041BCADD29013B1B0D65C0C77C172F5691
-:1048D0006D39701FF657D6EA602EE8BFEA9505B726
-:1048E0005C0FE505C06F58A5EA997ABD2F9417862D
-:1048F00095662C774E64C41FA1143DFC0C8CD7E93F
-:104900006D4BBF03E4E54C9D93F90094E59EB6F42E
-:10491000DB818FCAC3BB4AB05DF94EC58F682F7E5D
-:10492000F999235938AFE780AF808F2A7624329FD8
-:10493000C41FFC7F0AA672037C5F0CF344F95FC0BE
-:104940009A4A988AE3AFD77D9E28BECED419344EBA
-:10495000B73C3D07E340BBEA17153F4EB1DAC682CC
-:104960002857E75E71CDD8E6C6F9D5EB791E9CD7FE
-:10497000C33AD65B109EB507555679788B5E02DF39
-:10498000CB376DD1E7E723DE40EFE5235C7DAC70EC
-:104990006D540388DFC5C9CEAD2AE087B90399D32A
-:1049A000E3F0CF993A506379D17239CA37E993B0BD
-:1049B0003ECD54BF4449267EADD8A1329F859F3855
-:1049C000FD43C738FD43FB3CE16772A2F45B6C70AA
-:1049D0003D29E9B73859D053EB2A8C07CF23480F2C
-:1049E00080A709F105CFB5023EEF0456A4015DBCD6
-:1049F000016628ECF2FCD96467B3188CFD169B178E
-:104A0000D0C64359678B989F3143AB0A4C82F2570B
-:104A1000ACF44D9C0F637E5F29E0B951613370DEC9
-:104A2000871158984F63964EF86B9A5CB84D5504B1
-:104A3000CCA9589EFF93D539D4FE38B5D7A0FDF048
-:104A4000DEDB1B25E32CED8D9232D9FE3DACC79CFD
-:104A5000976EDF54729D75FC9272D9FE231ADF7D2A
-:104A600069F88D1B2758C7BFB192DAD73838BDBA5D
-:104A7000929DE1AD506E70F9031AD24D63117CAF77
-:104A8000A5E46DC57AAAE407D61650A1BD7B67F2EE
-:104A9000C8D5CCCC1713FF88E379405ACC7C91342D
-:104AA0002EC1C28FC981144B197A324E5D13D54382
-:104AB00001AF93E0D1FBEAA42F8AFA3A09DE07F7A7
-:104AC000BBA8FCE0751CDE07FBBA49CE10069605B4
-:104AD000653D78AD615A8F004E856532764109BAE1
-:104AE0009431E6F73E1BBE4F50592DCE27C1C14829
-:104AF0001F3D9C53B82D64C2CFCA01405F28A72A2E
-:104B00003AC7A3C0EBC303E667CE328DD338409FCC
-:104B1000B1359FBF9FE3C6F14AD315D4837A579E20
-:104B2000E1EE398E23779C651C6776198D931333DC
-:104B30008E23BB2C661CE78CADE2BD1867D0A5C6E2
-:104B40007938F73AEB7CB2CB699C82D8F96497C785
-:104B50008C93C0E703EFC5387EC45FAFF31934C14F
-:104B60003A9F819534CEF538CE18D37C0656C68C44
-:104B7000E3A671F03D8E0386948F6500DD1D5DF325
-:104B800089FEBF7491BDA03B82CF62BFEC5D17234D
-:104B90007DE283713350AFC0E20CF2AB292934CEF1
-:104BA0001709407FB799CE5C1FD113F4CF3C012287
-:104BB0000B0344A07FAA058FCEDD392DBB1E9FAD10
-:104BC000C599B3D02ED9E0F10F01D139D75AACCF66
-:104BD0008963DFCC6BB29F6AB7F0AFD07B13D9D0BB
-:104BE0005A18BF05958DA97C0AF41703BD7512F4F8
-:104BF000173E4F0BFBF423D06F4C37C35B4FF3389A
-:104C0000A5713C9EDAC4D7912FD61FB383B187C359
-:104C10001CCF07B8EF14D398D704C69F49CE6A04B7
-:104C20003DBA5E7184B7123D02FD6CC0E76C631F34
-:104C3000C095A80776E61F843D0A7FFD6C60CBDE39
-:104C4000B372D761ACF6B6326BC06298EF8C96F552
-:104C5000F67E503E676FBFCFEF36F533C37E12E767
-:104C6000ED84FFB09FBB83768B7DFA9D326BF9DEBE
-:104C7000187BB552C915F410E3FAC276A4D79DE9A2
-:104C80001C9E7BF139123F1B44AFFB0CDE56C25316
-:104C9000F3433B8BD07AD49EC6F2111F696417058B
-:104CA000E5BA1203DF7D7667A014E879DFF755C215
-:104CB000632CBCEDFB130336B097DA37FEBB1DED5A
-:104CC000EFCBC17FFF52EB7716E2E349BC4A3EB817
-:104CD0006B46519F8F4CF5EE0EDED4E72313BF7C5D
-:104CE000A76C9AA57C6FEDDD96FAF72F9D65F93ECE
-:104CF0002BB4D0F27DCECA4596F2BCA6EF5BEA2F6C
-:104D0000D8586FF9BE30BCCAF2BD62C77A4BB9AA97
-:104D1000F9494BFD9AD62D96EFB6FDC36E45795CE9
-:104D2000FE5B95A17D76C17DEA11B4AF2E189A1F66
-:104D3000EB5423AF811C7E529749FC7DA6CE47CF12
-:104D400073ADA39C688FD724803CC35ABF5FF943DF
-:104D500068E504D423501F74F841E5C350089CA7AC
-:104D600037141FF1BDBA516711605585A574F375ED
-:104D7000971AFDAEB5C3F751BD7F57376A71BF6B48
-:104D8000ED5ADC7E3B95AE3CB4EF42EF3818DA8149
-:104D9000BDD90FF0D70FD78BDEBE77D85859B3499E
-:104DA000EF9C526CC407772A134FA17EAED4B9BCD6
-:104DB00057EECE9A88FE60A51EC9AB755F62BC66D1
-:104DC000002603FBC9A5792D0CF78BCA2FD16F9054
-:104DD00045EE97B0E0C7A89F3B0EA8A46759E450E2
-:104DE000F66DC371FCC0297CCF5AD3687D7CBB2E85
-:104DF000D0E723F0E74ED44DA1E7EFEB4AFB7C046C
-:104E0000BAE6BDBA19547EBF2E48CFF6BA327A9EA2
-:104E1000ACABA5EF1FD52DA5F2A9BA103D3FA95BFC
-:104E200049CF33754DF4BDA36E2395CFD585E9D910
-:104E3000ED07087B94A50AFB4FD8EBB07250F9BC84
-:104E400098830AFFE67EAB3F13E5FABCFB8B3CB4CC
-:104E500073CF9F00C3248E7F289FB1FCD63BFD02F9
-:104E6000B4DECF0F03FD47F5FCEE4AE0F471D9D86C
-:104E70001406FA67D5109D69307EC22FAF217B19C9
-:104E8000DE6B8CF465D83FCD13A77F9C73C6E5E934
-:104E9000D4CD1F4FFDB910E30F770A7D987048AD50
-:104EA000E574DBE647BA99F0C7EDB297853E8FC14E
-:104EB00023D972593DF179364DE2B32D1BE3001B26
-:104EC00094D26136E083F32D0E9AD7F9BD896186BD
-:104ED0006D313832FE5278E37054EC701966FD5033
-:104EE000D59C6C58F5459661D617E78F6EF3A2DC1A
-:104EF0002FCEB4191F8D42FE0808FEE07C27FBAFC1
-:104F00006ACE31DC967EACE5F34DCA14F48340B929
-:104F100027DD1EC73F90CFC599BAF111C8F7991D7B
-:104F20008392705CF0E30C1CA7A3CE30F8B899868E
-:104F3000992F2B9726507D095F6FFDFEADE143CB86
-:104F4000E0432723D47F3DE89BFBD94CFB23C5736B
-:104F5000D85EFB17B8EE38E0FFAF291EA05159F616
-:104F60005BD3AC861CD7E2FB9D96F1A09D4FFAD097
-:104F7000B85EF54E778D9D32C505AA710CF28F9CF7
-:104F800044E720F49804FD756AEE950A8C33C5E673
-:104F9000A3EF35821FAB9CED7A105E9D6DE1F4E8C6
-:104FA0006D9C3375477D1AE88F32277864304E59EF
-:104FB000F3B049A81FCFB62C4F0F02DF56A8E71F4A
-:104FC0002C8DD37EA54DE1F084ED5DEDA6F9C838BA
-:104FD0000A63D0AF330A3F72FA295339565FCBE7E1
-:104FE000A3D82FF047F5CE6325D703FCD5AD9FEBB3
-:104FF00008C7145BF0515B5A74FE0ACE1FFA29DF12
-:10500000F1818EF3FBC41ECAFBE125F4544F38DD59
-:105010009914B793F085581BDA31B3BBE38ABEBB52
-:10502000DE05D1FCF45FEC6C35C0C1BE825AF0DD08
-:105030002EBECE65A55EC4D7EC960A8A2F7E6A93F3
-:1050400076535321F2C759669B82F33BCBDEF28E37
-:1050500032E1AFC5C6ED7EB692DB3121F80FE1013A
-:105060007BD662D72CD8682DCF67D3D3516FCCDFD6
-:1050700060676140D142B48B247FC0BCB7DBB8BD50
-:10508000BB80D536A23DA739B87F30DB605A3F8060
-:10509000ABEAE79B0BD1EEFF85CD46F49171868597
-:1050A000291CEEF2D4B01E80EF1FB68CBAF37AE45E
-:1050B0003E47B811D76596C4FCCFB09EF89CB3D2DA
-:1050C0000ADFE5E08F8597B165163864BF120E756B
-:1050D000871208C7E1BB3724DF093D92A25AEDFCD5
-:1050E0008C98F27B3611BF54998A743E6B3843B664
-:1050F00024FAEE8F607C64B7C3BF1CE8FB80ADB4BC
-:105100001DF533D80505CC54EF015B90DE77286F91
-:10511000CE47FB94699102F4EF614DD1901F74C1A9
-:105120000F6A82B700E3B11E06EB27C8A503E1832F
-:105130007E1A3D65535901C65F414EA1BF75DE928F
-:10514000A30A945DEE1686FD3932ADF16597CF5A0C
-:10515000AEC17F201D86328AE3240EB57E87058B83
-:1051600021BF79FCD6F7FFD18DA708F1AD97581A6A
-:105170009E4E774485F1D938ADC36C37573B39FC27
-:10518000E49743FD25C29EAF66BE10C58933391F23
-:105190002CB9C946F02CF1F8FC21F8AE680186F272
-:1051A00087B16AF33A56731144AE8FA9AC75E9C85A
-:1051B0009735173516067D5F600B7AD43188BF00AE
-:1051C000D9B94E40D6D700B2E69E62B17B59FF14E2
-:1051D000B1BEF637CCF2DA1FE93C264A67A917ECD4
-:1051E000422F82BEC850D3500F7695905FC2DA49E5
-:1051F0004FC87A7AB45E7F84A3B77AAE68BD9C78D4
-:10520000FD55FDFC853D21C07FF9CF1EF302F1D98C
-:10521000A75A53BA1FDE573EB3C28B7CFC8916F2E5
-:10522000E2BC3F0DAB53E2F1F39DAA22FCB1805BDF
-:10523000417F58D0E9CCF36B6E41BC7FF18CDDC06F
-:105240002A353B1C110710B1BA6521E7A71D8E0F47
-:1052500078F9E1CF919E35AD56792B7FF6B1748CFC
-:10526000770286B8DFC822643F576FFFB804ED911C
-:105270001AD6457A22B61D8E7F3185D6AF597A521D
-:10528000CFEF72FFA546F07D4DCB9ACF552F96AD4F
-:10529000F25D26FC911B554F2AC595C6B2B1483721
-:1052A000890716E6F6F0F2E79E28F800E0E8D8FE57
-:1052B0002F5EC51237E2FAE17CF39C1FBFEAEB5D7B
-:1052C000AF9F13FE7CB45D98DAF95AB9FDCEF6F2C1
-:1052D00067A53DE2457FA9728BDD0F92C92A5FD891
-:1052E000F693A790AFDF71509CA1E285C36F5F0773
-:1052F000E58A5DF6D4A97C1A6E253D4A8F1AF87F9F
-:10530000E9C828FECB5F3AACFB86F3F70FA544E96A
-:1053100050B1EB80CE86F7C45B71F301BDDD1D8714
-:105320001ECD1F94A0BDBDFCB92F7594AB4FF72BBC
-:105330002C23A767FBB22D87C99E433C11FD047D3A
-:10534000BAE9D5834E915B5E1D4DF50C5CBF7AA327
-:10535000D3D5B8F6A5111FBFF82AC6EF7FEFF0E34B
-:10536000FCCB5EFCAE17E7715AABE5FCBC79457A25
-:1053700000C62DB387D20D7AF2F7654F3F407CB659
-:10538000E0D803E9140F60812C1BADA1A12C9CDF98
-:10539000BC4D77D0FCE6B320F15BD966B5348CF117
-:1053A0002C8D4DD915471EDE14F2707AAB03D71E33
-:1053B000761A152CFA876FA9B44FC0D8228A373CC9
-:1053C00020F721D8622A5F70723A6D536D32BEE1C8
-:1053D000B4F0E9F687DB903E67060432303E097888
-:1053E00008097C29A877D4639333387D984F2B1410
-:1053F000ED402F16E37BACDF660FB80A2CEDC43A04
-:10540000C6C75F22C607B813D01E3B9D0EF64D9C43
-:10541000F97DA94ABD0CF68689BF4C72CDE57CFBAF
-:105420002A2ED752CEC3D3A6E0F73F1EE7F283ED74
-:10543000705D07B82219F4FDC0ED0AE901078BC4BD
-:1054400093E7ED7621CFD6EF727F12E0D6707D8A9A
-:10545000F209F49F42F8273B6DFE066867D2CB3510
-:10546000381ED5D3A3EF4DEBFA0221FFAFAB627F1D
-:1054700054C83FDBC4E5BE77BB37C4FD037BF827C8
-:105480004FA1BC827CE23A53F982BD14E7FDD9CE2C
-:10549000436FDF037CFD59B39453ABDE8C95D3B2DD
-:1054A000DD63583C39FDCCED6771E514DEC79553DB
-:1054B000773BF1F1DF5B6F4ABC9D8BD19B520FF6BE
-:1054C00086BF583DB856F5C5D583F0779C15F6E4F0
-:1054D0003BC96F92CFCA7F5A3590E246921F25BFD3
-:1054E00075F3A3E4B7D8795AF116FBFD15A16F2423
-:1054F0009DEDCB58C883F1D27D2AF9D79D00532367
-:10550000D0B773674E18E3CE2B5C3C7ED1697479BB
-:1055100053E0B9229997BBD2F446D40FF27D978B12
-:10552000C7B73B4BBBBCC926BFE283BDAAD707DFC9
-:10553000DBC36C4A3C7F03342FC1D1CE7AFBCEE370
-:10554000C1935577F652F4DB9B54DACF9E5B7F977D
-:1055500017F7813BF70EFA27D44FF3DE000313E071
-:10556000ED443B3009A717D0302F618EA0F7272CD0
-:10557000F4F80498DF9CBDDC5F98BB36C6BE772F7D
-:10558000D151DF807D7FD21AD7E67C532EFA29DBFA
-:1055900064FD5ECED612DDCA63F82828FCC0B19A3D
-:1055A000E0A3116C84F0C378FC42E8ABC96AFE3F0B
-:1055B000A19DD17994C715CFEF5509FFE7772A61EF
-:1055C0008CFB507C773CD2BF4B67267FB903F94DEB
-:1055D000EF5D8E3B5EFE43E10FA14AE59E770BFE39
-:1055E000199E1D7BDEC9FB05967FFEBBEC7759CF6C
-:1055F000FAC5FBFF44FBC79DFB1D0447E7FED7B37D
-:105600007F88E5571D7E84B3739983F6CF42FB3DB7
-:10561000E121F87D00D01BD7CD7D5F16B4D3BAD37E
-:1056200040749AADF1FD8EF37BFFFCBE82F9077BDF
-:105630001D3E9C47CD7E9E1752F3AA8BE22E9DFB0A
-:10564000BE2C0CBAFF76F3A9D65990F8CFC366ECFE
-:10565000467E4DE6FB0035BF18BFAD1EF7C35B0E9F
-:10566000E8B8BF52FCCBBF14A07EE9DCCDED84735B
-:10567000F6F6A7711FB44A1BBCCC8E728F365B5FE7
-:10568000B03BEDF32686F2E3E185E3A113F080F36E
-:1056900002BC94A15EEC0D1F0D1AF737FFFBE1E38E
-:1056A000F3FB70FCCABD63496EA2785102FCBD27B2
-:1056B000EC5468FEFCFDFE2F0BD0EEF9ACB99ED683
-:1056C000F1CBCD7BDBFFB8792B912B99F7C1FFE6AE
-:1056D000FC3F45E3EB52AC1CF4E4F39F3F48E51775
-:1056E0003D7E82F70AE5FFE4FF34BAEF06BA7B2F6E
-:1056F0004F77C5FEDF75DE97A3FB1B82EE1E03F31B
-:105700000A3AF7FD85E2E572FE979BB7EFFFD17984
-:105710004BFB67B5CDDF940BF5D7B2489B0FE05C30
-:1057200031747A138699C04D288D678F94DAB97FCA
-:10573000A42A3C0EC306F0B81013FE04A580F9306D
-:105740008E329FEC3ACDDD487626D3FC6D01C0C782
-:10575000EAAB67FB2957838D3C11C472FF097E8A2F
-:105760006FC6F8550D0A0B2860EF69577FFB28DAE2
-:10577000F9F6A1B688A3809E1FE0F36111C7B21BA2
-:10578000BAC59F70C7F8032E9FF5BB43F4E76423A7
-:105790009B72314FC1AD196118DF5DD444F3710FB5
-:1057A00061ACC9B40FE860A6F6D05F3E06604DF666
-:1057B000E337C55F7D37FE46B605107FC36C14D74F
-:1057C000A2A43EC2873FBC9AFC4CEE3F46F1D9D81A
-:1057D0008678D418F87F7C7EE43732E12F6AA20BFA
-:1057E0006DA82DE0B2D6137ED165E9C3E9915D299C
-:1057F000E8B3D8420F89FF3874B1D043E2F79BD2A7
-:1058000025961EB178BFDDCEE36DB174B2E477A406
-:10581000713F24027EC8EB3BB751BCE3ECF31FDCC5
-:1058200082F52B7EA13227F4736EA78745507EB593
-:10583000B08EFE54798B1A37CE2BEDF28A9F7968A1
-:10584000BCF2DD8EF054685FBEE7C302B29B967572
-:105850001DE9877181E7154EBF507B01EEDB956B2B
-:10586000DC3F88ED6F939DC7053A5E499C81F10747
-:105870006507CF572C6FBECBEE30F1DBFFB2F3BC28
-:1058800057A847F21C7A4EA1F5A6277CDC2FE878B2
-:105890004EE1F0B5DAC398F758BE638B1E44BF7271
-:1058A000C7E714C72EFED90BDE76F21755ABFFBC47
-:1058B00043257AC293E817EBC756B754919F50DD42
-:1058C0002CFCC4183FAAE267FBF6840035152F3D77
-:1058D000EBC5F8CB99B667BCE49FEEE0FEA7E6D631
-:1058E000E2FBA797F34B9B57C5F54BCFE03FC09F1B
-:1058F00038608FF1E777F4B9B2FDCB172E3C8D718C
-:10590000D28EDD9F3D8D7057FEE7BF3F8DF63DDBAC
-:10591000EF329E81F9D63CFF5B8A37C976EF0A39B0
-:105920003D378085B2A0DEB9771C943F726EDFE907
-:105930006CF4E7CEEDFA533AFAF54BF64DCEC0795A
-:105940002F79B93883C59177F944BE0C5F419C30FB
-:10595000960E875A0E911F72F68483FCBEEEF842B3
-:1059600073158FD7F8445C6167FC38ACF487AB5B88
-:105970003E2CE1F131E1175F2E8E701CE878ED15B9
-:10598000D06BA78813C5D0EB2CFE03E8F2650CBDE5
-:105990002EB0E08FB3701FB2A54FAF7184C815E071
-:1059A00049C6778FD803361DE5607762379DA622FA
-:1059B0009D5EB8908DF1F04FEC5D64F774ED731857
-:1059C000E8DF97EFFB1DC9C5B9978F51FC94893863
-:1059D000EB39D6FDC7E3628A98DF760F8F3F087CEC
-:1059E000637CC2E7A5F7220EC1F955C6277A8B4B17
-:1059F0008CD545DE93883B576D7F576731711E65A7
-:105A00001CD2E9034B7C5CCE3BB63F03F130D61C85
-:105A10005F8B1FF7917E73944E3CAE26E367E7B62B
-:105A200088B81BBCEF3F12FD411EC7A8092BBF63FE
-:105A300071E450C6D746EA317218BEB2B8DAE5E072
-:105A4000FD6BF13144E7EB83C44BC757F1F5F03FF1
-:105A5000EA5CAEA7D8825375D37EF6FD629F45E21D
-:105A60004BC2DB21F2F03A9E57291ED4D87C88F431
-:105A700069AC3C57F7720EE23E9DC75BAB5B0F14FF
-:105A8000A0DEE938F80AF15DF5CE0FF410F4736486
-:105A9000C74B3AB727399FA39E0E9BF474C78B0759
-:105AA0000A78DC8FE7DDC6F65F21FAAFD96BEDBF70
-:105AB00066E7E796FE2B42CDB4FF75B971CE6881DB
-:105AC000BB70BE67DAEC0CF5DD9966754A389E1D31
-:105AD000A8DB2DFBA08DC7745AAF46BF9540F9B91E
-:105AE0004B8E4D793709F7E940CCD0FE6DA9E77CA4
-:105AF000D5F2A3403FA44BCBB17B545C37F6201EBC
-:105B00004D7670E1F1DA620FC86BE17BA5A391AD30
-:105B100062F5C0D813360BDC304E06EAE306E80720
-:105B2000F3E9317F08F747556FC9148447356C8610
-:105B30002BEEFAC9FBB3BB4B19DAE576C39AAF9CDF
-:105B4000395DC4D122D6BCF54C9D0DC57D70664B28
-:105B5000F0E37EC0E26181118731AF7E5E26C589A8
-:105B6000B36EE3EDCE1AEE90EDDAE8BE6DE245E8F5
-:105B70001FF3606CE1F533A15DA2D6ACE03E003CC2
-:105B800019D2E5015B70AB9E86F574E603D5F8B4D7
-:105B9000AE68947F21CEBDC8FE64BDDEF683E539D4
-:105BA0002455C03F48EC070F60ED0AEE076FF2F096
-:105BB000F34803DDA974DE689BB0DB7CB8EF8AF59F
-:105BC0006AADEBF665CF23ADB496538B8B160DF40F
-:105BD00033F661E383C51AE883D4BB8A76F5337064
-:105BE0005F7A4331E6DDA73E5B34220BCA77398604
-:105BF0004FA2EFBF2E1A910DE55AE7B849F4BD4206
-:105C0000A1BCC07D7A6771283F2A9F6960DC62BEB3
-:105C100005C8ED4194DBB3A51D8DF8B5EA8E2F7450
-:105C20007E1E8695E2FC078CE3F3EFEF7E6F17CEC6
-:105C300077A0ADBD1EF9EFC7FBBE4CC67A3E66D05D
-:105C40003C0DD660E0BE3CBC1AF7F525F27F62F34E
-:105C50006024BF6F4B0CFE06E158357BE81325A886
-:105C6000532BFDC447B1FBC4CC4825BACC157441B5
-:105C7000389DA63CE4056A88F25EF04402E5F5B082
-:105C800049068EA7842AD5AFAFF9E6709DD645BEEA
-:105C900081380F663A2F7506E15D9718A467EC7995
-:105CA000A9837A6907BECF9A7F311BE721CF4115BF
-:105CB0002F70537CE0FC5E1676C49123F9DC5AC742
-:105CC000D2B4C1BD7FFF8D23F81FD87FEE2F7DBBDF
-:105CD0008F427FD7CED5FD98C276EDD2D169DA2832
-:105CE000C627847685A05F26D214E5EC41C6CFE7AF
-:105CF000389400FA8F9DDF35480FF79F3B95FC8C59
-:105D0000CEC49C66CCA3E8FC21CF0780955E417988
-:105D100018B03729827E10F0F31731FCFC8575BD71
-:105D2000B18EDBF9B5AFB59DFA33447F60F0A4A323
-:105D3000FCF0BF4E95DBDB9D753E8203CCC303B800
-:105D4000AE5EE978590E110F17F401BCF77398F0A5
-:105D50003ED0D12BFD721D9C7EF48CA5DF7C676D3F
-:105D600036CA7379697309BAA8BFD5835761BDD3A1
-:105D7000F38F34DAA15ED5CCDA3C64F69E74E5E7A5
-:105D8000B1D2F7CEAAB763BC02E9E2EB49BF6B9789
-:105D9000FAD3B43E167A8E72403FD7EEFDDC8670A1
-:105DA0004B3A3E21F2FC63DBFF834311E356D6DB23
-:105DB000314ED2AA933D1B5B6F0A1EAA1A132D17F0
-:105DC000380B69DC0C1B8F77F4ACCFD7BF68BF4EA4
-:105DD0003A97D51B1F1618BC3FC0FBB7117E89F739
-:105DE0005B1C42DFF6C4FB34AC0778A7E715E0FD87
-:105DF000CE4BE15DDACF15421F54E0FE09F0CDC76E
-:105E000081E9E98361DC12D54D7CBFF01995E40D81
-:105E1000EA4FCD4A8FEA8F85E36B0FE03C176E5651
-:105E2000883FE78AF3A59F897CFED83CA8F93342D6
-:105E3000B4AFD3231F2A1CE3CFC5E4B95747F97485
-:105E400020CF4FE3E7B5542107C50BF293D00EDA0C
-:105E50006FF7FD9AECEB3754B6350EDE89B9D2A256
-:105E6000E501B5364B7E2C9B9B6CE977D2827CDAC0
-:105E7000EF5EECF15DD29F1AB8D4BA5EE784ACE76E
-:105E80008B06ADB49E2F1AD2D4D752FFAA8DB996E5
-:105E9000EFC3C2575BBE5FB363A4A53CBCF93A4BEA
-:105EA000FD6B5B275ACA2322DFB6D41F7574BAA5CF
-:105EB0003CA6ED1E4BFDB127665BBE8F6F2FB77CF6
-:105EC000BFFE93C596F2B7BA7E60B54F6C8CF421D5
-:105ED0004B50483FBE56372E1BF3B0D9686512E2CF
-:105EE000B358E411BEB648B7195E7CE6D90CD0535E
-:105EF00007E74DA5F5FEB545E9011F3D0B03E8CFCA
-:105F00003075C2E878799A938DF1D9E67CA862A7BA
-:105F1000DDA2CF261BD6F2CB926F0672BE79354634
-:105F20009FD96B2744C022647D170ECEC0F140BEBE
-:105F3000F609BDB6EF0AF5DA4194C3D3E991462CD0
-:105F40004BF962625D2D127C04CF808EF990933CF8
-:105F5000B4FE06F0A58FDE87349093894E7FFFC391
-:105F6000381F9B3F15996FD28CD2D7786EA5587F7A
-:105F7000D950DB37597FA57C67DA44BE5A0ACF5720
-:105F80007B725E5E1233E1F55D874DD8CD4DFC69C5
-:105F90001C7575E7A9E69ADF7F92A099F2E3940554
-:105FA00053293F24B3173DA867E6DEB41DF4AF9E26
-:105FB000E5A3A77CDF38C31637EFEB9CD09BD2BE9E
-:105FC0001A16B5AFCE211DCE66BEF538E62555CFE3
-:105FD000EC22FB2AD3D6B4E808CEEB57AA8857FAAE
-:105FE000F8792A6117CFBBE9D14547701FFA5F875F
-:105FF000905E92E36CAA9B7293663A37DEBF173FBE
-:10600000699893AF0F4FD70DBD692EE5691BFC7CD6
-:10601000A8E83F3B54558276F240915FFAB82D7E56
-:106020007E4B8293CF2B03498EF01A6E928FB3F37F
-:10603000DFF36A308FA76CC10427EED35EDB56C84E
-:10604000FDBC801FCF9D6647EE7D1CEB67676A94A1
-:10605000DF1A3B7EC6CCE0CA1C985F438ACDEFA610
-:10606000729782F51D0F31D607EA37FCA74AF03444
-:106070001C1C4FF91E0E772D43FB55CEEB50CA5317
-:10608000841FB52591D63D26F6C1657CF542E6DC38
-:1060900036B42B2E6CB0D37817608E06F47FA145F2
-:1060A000A57DD6232909111B94D5951E52A9D9681F
-:1060B0006B42FDF92D9EB02F278A176DE3043AFF3E
-:1060C000E2E8CFE7DF90E20EBB7368DE29386F09A4
-:1060D000A79CF7805EFCCA1B041EB3AEEA3E97C1C4
-:1060E000908F5543A37EE725F37397E1BA71825EE3
-:1060F000D6F934664EBFF56E3C2F745C65980AE2A3
-:106100006B6FA2F9CF87F9637C3716BF677D395F64
-:10611000D85482F3068453DD5842F3A07AD0AEEA15
-:10612000C70A7B2A07F9303885E8DAD746E70063E3
-:10613000E12E71F238EB8D4E1E0FD033F36EDADEA6
-:10614000079F83492E6E76F6BACEDFE2E47A889E08
-:10615000577E9F40C4B2CEAB011BD941B17081DEE6
-:10616000BADB69B26BD4A4870AB0DFDEEDB15D079C
-:1061700074B4C7DC8CEC64A92F7BB3C7D00E437E0C
-:106180009376D802A755EFC2FCCAC5FCCAE3CD2F4F
-:106190008E9EADC17AA7EF89C4B563D2F4F87A6850
-:1061A000B3C07F8DA1338A2BF5120F7FC229EDC1B9
-:1061B000BD0774C42BCC13F19A09FE7109E9197B50
-:1061C000DCBCEFCBF919B96BF2771FC5FEC08E4569
-:1061D000EE39DFE44B4AB9841D615FFA2B97198FC2
-:1061E0008FC4F007E06DBD93DB7FF4EC81B754C042
-:1061F0009BCD82B7C79D97B4FFB8BEED2BCE0F9C49
-:10620000137802BDFB7DECFFEC6DE7EE44DFB0EAF6
-:10621000B6AF845FCBEBA70BFD0C7EEF3F7CECA30E
-:10622000FA4B709CA8FFDB5E887ECFF297AF4A42A4
-:10623000FB69D29EBB0D7C9E4F1D4CEBCFD93D8E92
-:10624000008E733685E7D39DDD33F608C6073EAB77
-:106250003B9A6BD6CF675F3C5668877ECEEE3E5644
-:10626000A851FE6ED8628F577DFD9B423C2725F3D7
-:106270009EBBE9ECE47A7D838BC71DD2D2F546CC78
-:10628000E7EE4848A6793F966E7B245E3C05D51D17
-:10629000EDAB7B74DA475C3CCCB7DC8DF1941C83AE
-:1062A000F264972B81AC79B80F32CDE9C7387D6A9B
-:1062B0002E1B9A9384A1C62073030B395E6BA2E355
-:1062C000A0096DC6013463649C452BE6FAB1EB0E60
-:1062D0009DF2BA1235DF1333A19C3943A3F549C6A9
-:1062E0005DFE9C9042F0C9B84B373C6FD869DD58D1
-:1062F0009C136C2A82768BC7A7503BEFB4B789DE1C
-:106300009D3E5BC88EF3D1BA28FEF24F7543D3068B
-:10631000031E8D2CDB4D64837C05D832E5E77B358D
-:10632000164A027B640DF0EF60E0DF963A27D56FE6
-:10633000043BCE48A17B0CA2F77098F87E779D4174
-:10634000F57E529749ED1EADF3D1B37BDD67BC1DE1
-:1063500095E3E8C3BFD7735D1DBFEF4396FF7D3460
-:10636000D85540EFD4B14055C04BAA381F2EBF3F7F
-:1063700055F7C6A049830532009F7D2B8D2DAB2F8D
-:10638000016FAA239C8C478007BA58685226E6E121
-:10639000753D52928CE717EA274D1A0678C4FDE73F
-:1063A000EBC09570AD6D084D007EA8F4D5635C2EF2
-:1063B000AB5569C6F526AB757D11C6F9A11E9DEBDF
-:1063C00093FDBA5C5C3F251E7A52C91D8EC17FBE0B
-:1063D0006FCEF62586E39DFF1CEAE27A6AB068B7C5
-:1063E00046EC7B774D73D33D0989875CC42F597B7D
-:1063F000AFA1FD37772FFBBEB1FD241EFA13C5698F
-:10640000DD4AD301DC4764F3B8BD28F9A9B7765853
-:106410005FBF82FA9D7E8DE2B660A6D2FCCE4EEBC7
-:106420004FF8C6FAE67B3C3AF5F876D46817B753CE
-:1064300057D8E3EB6F8D71FB60745B17ED37E2BDEE
-:106440004A88EFACE34D0AFAD367159E2FD117F0B7
-:10645000B11BCA59139AE8DEA56DCEE0752E80EF08
-:106460008FC689BC15008E2BFFF7D9D84EE2432D7D
-:10647000D09DA84FB2F67EC0CFE1D8DA75CC4FFBE5
-:10648000CEAA17283EA8EAA539BC5CB702E3876903
-:10649000DED22DC8272CF4C2A4D7C0E7794C9C2BA0
-:1064A000C637A8F7D6B84439F47C4300F8648D9D0C
-:1064B00097BFB3EAB9063C77BCC65EBA10CF256376
-:1064C000B901FA5F93DC9C6983B2BBFED986A30352
-:1064D000B02CEB3F4B7C76A78B9FEF61EED22CC4A8
-:1064E0007B77D980F2705359E365E6E44F39BFAA50
-:1064F000437F3AD20FF8A57A2FBF87A61B6FADEB6B
-:10650000155C4F7E5277D4D7A0093991FA03D6E5AE
-:10651000AB3219F9157A5809E72A781FC7CA74737C
-:106520003EC9AD898A585FA0BD392E1873EE8C8E96
-:10653000B2E0FADAC0F33662E9FA46425143C218D1
-:106540003C2F1A5CADA21E7CC16E50DE7BBB467A2E
-:10655000BB43E6BDD7DAC97EAB14E750EDCB82ABC7
-:1065600087A15CDCABF9310E5091D35484F64BC556
-:106570002B39FE7A16CDA3AD486E4E1FE98EE6D1BB
-:10658000CAF2721137CA48AE4D4ECEC7FD92F5D948
-:10659000B89F51CD9AEEFB01C2FBA6CA90DF3F3DEA
-:1065A000303E09EF05AA8232C6A9AA5A8EE941A84F
-:1065B0005790C0EFA3A96E01BE71F37B6202798C84
-:1065C0006DD18C04D4F33F09D45E8D26EC13AEA3B9
-:1065D000935C40D767730306D2F9A5556F3538BF72
-:1065E0000565DD18C64660F99D06E4B38A1136CA12
-:1065F0008364A1775E0B0C16FBB1507EC89531D930
-:106600001C97CE12EB78CD26379DD78275F971E4B1
-:10661000EFEA8DB610EE6FD99C6D744EE725975C4E
-:10662000FFADE79B36285C1F86E6F138E7929B5268
-:10663000BE4DE79B56E41AA14BC45BCB2E26D03946
-:1066400026592E48F051FF655A88F679CA2E7AE904
-:10665000FCD3DF6E3CA7E53C55CFF1DC048F1CAFCB
-:10666000323A1ED1F5D0C85F3D3E18E8B66497DDDA
-:10667000E630F1DD925D62FFDC15C8C07ED2748E1B
-:106680006786FE1BF01ADD41C3CB210DD681755202
-:10669000BE431D0D932620DDA2DF9955FE03E83F82
-:1066A000AF4B90E50BF1EB27C4D4CF95FDFF85EA06
-:1066B000C7C29396102D3BA1BEF617477719E15B31
-:1066C0006F8BE92F4596F51593FA47F9EAA155DE48
-:1066D000C321E0AB75C94D45A8FFBBE6311FDE7392
-:1066E00085FCEA37E9DB875C5CCF965DCCB5D03BB7
-:1066F0008AF73C0B5D4ED7655AF62517CC5C42FBFA
-:10670000A70FA1B0603F2CC4CFC16CEAC7C2A6B826
-:10671000CDFF87E3AF85E3BA5EE0F887FF62387CA0
-:1067200096F1A2700CB6C0F7D7C2B1F5CEBC6FE738
-:106730004095C794903317D7851FF1BC35357992B2
-:10674000AF1EF74B7EA451DC7D08E3F928B91A3B54
-:10675000AA8D44F9690A60DC822DE3F60ABC5F6900
-:106760001F49EB10F90B83F63A66615E456E59607E
-:10677000213E59FF7CDA8F91FB984CC4F5E4FECBA7
-:10678000108315E1BD7C6F27CCA2752AB77466050E
-:10679000C6BF55CFE8045C0F1FB38543385EE85190
-:1067A0003E5E9A2DDCEC447BC93BD8C0F52ECDCBA8
-:1067B000F51F5B9D4FEBDF565BEED58B008E154AC8
-:1067C00051C21B88E7E45C8A63E37BBC0767AB5874
-:1067D000B7D464BF81EBD456B16E2D17FA5DBE4FAE
-:1067E0004C299D8576C4F2D545939DE3510F0556FE
-:1067F000F681F566D9EAA21599E371BDF1E53A6132
-:106800007D599650B4C20993D95AEFEB6B2447CB0C
-:1068100043FE02AB35E989A21568A734B81797A3E0
-:106820009D03DF0FA35FF86C8AD43BFC7BAED4538F
-:10683000A897408FA9F5DDE510EAA5DC6EBD5344AD
-:106840007A67FBD32A95CB603CB47B601E21BCBF2A
-:10685000AB6B8846FE910B604980B26B582EED6B96
-:10686000C1BC5902C6F587F1EF725F421F62A37D7A
-:1068700009AC8F787465F1FAFA347E9E59F7B8C97D
-:106880006F93FB1CAAD8574B1079248A318DCED92F
-:106890003AD78E5C8C7E9473B075FF588FC9375190
-:1068A00063F34FDC11B2BB1A12449CB90FCBA47B2B
-:1068B0000DC47BC6FC23F1997E774311DD77E76138
-:1068C00006E63B670623CC6C2FC9A703D6519F4928
-:1068D0006E1C6E168897EF704F22B787DD1735EE66
-:1068E000272A60DFE03AEA1176B8B08FECF21EA2F8
-:1068F000987557DA4B7671DFDD929B2666E0B921F9
-:10690000D51D70A29D73C01849FB292AF3DF5A6474
-:10691000B2771A2237513C5133020CED9CFDC2CEA6
-:10692000510D3F33DB398D75E080C35AB5AD308FE3
-:10693000EE9779CA15710E42FA3E66F3A3DE38343B
-:10694000B23CA4603C71292339DD56983E11F7030F
-:10695000B668A549F7A2BC1C87F17C9C6E7CFF79C8
-:10696000B982F1EF0BCED224D407EB9299C58F2ACE
-:106970004EE4FEC89309DCEE947E4223C013013836
-:10698000B48B57D37D3B43845DAACF9C44F12D4CFF
-:10699000D3C178A583D5860C77F43E3947A6CD922E
-:1069A0009FA85D2CA0F8DF930936CBFED1C3E23E51
-:1069B000405976B25A1EE7059E8EE7BFCD12703A57
-:1069C000C01EF2917D12B33FDFD33E227B45D2A79A
-:1069D000DB4E51F8B9CDDEECA39A8B368B9E8D9EA3
-:1069E00037D7492F9F13E7F9659E865BE8B3C6CC7E
-:1069F00060D3F539D1F3FB9AC8D7582BCEEDB34C01
-:106A0000ADCB7C4E3E11E331F0BD41E46D24C69C1C
-:106A1000BB77B99790BFE01AAA59CE69395990DA75
-:106A2000397CD6F75A66EC79FE50779E16E5156AE2
-:106A3000EC49850EEF737BB79FC8933A9BF87E2194
-:106A4000CA2FD8BB3F77D23E023FC729E359DFD4D4
-:106A50003EDE8F76D518F40BA78CC07EBF23D6A35D
-:106A60002C569AC537079B19E5F524F8DB19BF1397
-:106A70008CEC2D55EAB9D00B0DE847A599ED3B9369
-:106A8000BD3670CD0B0D0DDCEFA0F27756AD263D77
-:106A9000B8C225CB2BA80CEB5504FD1EB6C7E143AD
-:106AA0007E82F601941B76671ED9CB6A2EB8B4009D
-:106AB000F724BC9F10E3F97B1C5BD19E05BFF64E0B
-:106AC00097894FCF7A4E64B3FCB8FD852CFD657F66
-:106AD000B3FE60FC16CC0392DF2779374654DECE36
-:106AE00087ED58FFB6F743D0FF632F3BE8DE107900
-:106AF0000F722CBF162672BB01F58639DF529F3903
-:106B00003780CC29E5D3919960C9D396F2AA5D1C50
-:106B10004AF229DBED4FC8E1F77369018AAB6917C7
-:106B2000F349FE9F14746DAC332E334E4A2FE38C21
-:106B3000A47E7A1FA750E80926F6B334C37CCF4B56
-:106B40006FF21ABB7F17ABDFE453EAB7DDA2FF3B5E
-:106B500012ADF1E1F28DCD4790857E600BCE481CE1
-:106B6000837959EF797129AEB4450A50DE1EE8F9F0
-:106B7000BE1A27B7C0C5F727F2762C3A88EC3A3709
-:106B800031D884F6CC7D89226E9F09EB9A8AEB1668
-:106B9000CF2B5A87DF31FE1CF43D3119F5D4B412E6
-:106BA0008A3F6F4B2C7D1DDBAD9A5E48B10209F721
-:106BB0009A3A9E0F27F5A51BF105F51D5A2DE1CD3B
-:106BC000E10E44D0BE684CFCF564F4B1548DCB4169
-:106BD000E59ABD24074ECD4F7CE574DB7CB8BE3B07
-:106BE000C1BFC375AFDE6DA378D272BCA73707CF24
-:106BF000034C35505E177B7233D825F4A376315D94
-:106C0000E85FEBBD377FFB7152A97D8FFB750E8D61
-:106C10008F607F9A9F517E0B22E143935E95EB7AC2
-:106C20006CBBD8FE253E257E1D5A90F0AAA3DD1030
-:106C300007AECDDD7119AE0F33A4FE4C7E3B2F02A3
-:106C40006FAB94762FDA27A0173727A25E1CDEF5EC
-:106C50006F8A8FF4693AB76742F23E01CBFD453245
-:106C60002EAFBAB95D23E15FFCC6634EF33E512CF3
-:106C7000BCB1EBA53BDF9A47E1EC9F10739F6F3DE2
-:106C80001F472B25BEB14F0838514EEA8D9106DAC9
-:106C90002B0D9AEF7701CAFFB093DD0C76B8657CB7
-:106CA000F95C27EEEF3D2CECA8D8EF1E71DF71ECFC
-:106CB000FB8F05FED61DB89BF4706FF4C303CF485D
-:106CC0005F4F2E33F0FC8C5DC0EBBD4CBFBDF1D1EE
-:106CD0002307785C571BE70CA38B153B9E6A2F0D8F
-:106CE000E0792F7504237B571DC0C7075A1A181760
-:106CF000F68E4E61434DEBECAAC1D3F9FDCB69068C
-:106D00009DBF533DB6D27876A6C4536BA2CDB23F99
-:106D10009F29F966C8EF693FC9C4371FA17E89E57D
-:106D20009B56E4E1340E87999EAB06E766C4A34FF9
-:106D3000542F72BEBA1C5F144EE0FC9E01CF2D3062
-:106D40008F16719F4615E20AFC9DCABBDCCC80758C
-:106D5000ED2B4FD117085F61DB419EEFDE9246CEEF
-:106D60005FE584F8F2B2C8CDE9B2C8CDE3A84927FF
-:106D7000023FC57BC35BDA127C0A7C6A4989AFA7F4
-:106D80000BDC52CE44FE84D65E80F688AC5F38D3EE
-:106D90003A9ECFCDD7BF01B25DE8D614B4CBA66280
-:106DA0001780C7417E85E771B42686F17E7AB06A86
-:106DB000B5DB00AF3B84FFB703FCC269D06F7A023A
-:106DC0000BE2BCD3FA40399FDA0776B9A3FDBDC9FF
-:106DD00051C6260F2ADD8EFD4DCEC81AB13C87B7AD
-:106DE000C77E0E27B006E7C828DE6F7500CBA5E08A
-:106DF000F750DF45F9D1F7875176A15E7A7A7B812A
-:106E000082FB92B6403AAE231F1DFB01E5C12EC0A6
-:106E10007B8C9C78A5844A7E52E18952BAB7EC53A8
-:106E2000FC9885F71D950E738FC1FC30EB3DA46C6B
-:106E30003B3F3F23F1D5931FB8FE013843CE140BDF
-:106E40009C6C1CC2EDE4ED62F1DBFD147C2CE909C5
-:106E5000E8B9C623E88972DA22EEC5ECE61B71AF09
-:106E60004287B80F6A76A2B817CAE0FE95BCE7A4BD
-:106E7000450B24A27D3EBB3B3F2140E78F2A5D812D
-:106E8000A4F148B763DC7F3A5DC4EFA73B6D0F24E4
-:106E9000A1BC9E3EA62AF594DFC1F33E655EDD6986
-:106EA000BB6FCDD5F07DCE3FAB817AFA6CF50B3A56
-:106EB0005860D4BFA29FD4AAD23E64CEA3B3D4E17B
-:106EC000507F2E380CA88F6617BB4368C7B5FCBE31
-:106ED000F67D5CCFE63CEDF02D83715EDB38EA0B8E
-:106EE0002C9F5AEBF13928DE9AABE0FDF14BD6E747
-:106EF00018B40FB9948938F3C4926258839FC7A11C
-:106F0000E5FE8593EE9317DFAB1B27C1FCAE4E6BFE
-:106F1000B1212AFFB0B6BA11CFB3ADA82FCDC43876
-:106F2000C25AF7E4468C23A4A707DA6E80753DE2C7
-:106F3000BEB104CB2D4FC9FEA63462DCE017B660AB
-:106F40008E02DF4FBB679550FEF520D9FF92C60039
-:106F5000AC09B37F7CD51727305F7B5D6309DA0509
-:106F60004057615FAF21F8E64D90E526BD7830B41B
-:106F70004F649678AA3D1A97A0786D4BB77DBEA155
-:106F800004E3107326D6166BD07FE1BAA71AF3413B
-:106F9000C58E6D2A320250BE7EDDA6125CFF5A58A5
-:106FA000A002ED921BD63D5D8271F9D43ED6FE5310
-:106FB00055119767DB1AB1BFC29981110AB4FF97C7
-:106FC000752F35A21F9286F9B930DE05CF9F1A437F
-:106FD000FDA3FAF396E83D5AAB510EAA9CED47305B
-:106FE000549BBDB44BE779DB426FF4E7FCDC5D1EDC
-:106FF000DACEF3EB653993975B96C5D7438F7AB9B1
-:10700000BFD99210FFFBAB42EF4879493AC1023B2E
-:10701000E3C8CD16B7FBFF48EE5AFF6FE9B5E4CBE6
-:10702000E8B564A9D7043EF3AD7A1A8611FAFEEAF0
-:107030005CD40F0B30D9CA642F14B64DA775E47B0E
-:107040005E6E3F331F6F9F56CCF39DBA5E49E4F7E7
-:10705000A43ADBF2CCFBA2C7053E8A1F9EFA049D30
-:10706000776FB3333AA7B2ABE89279A69518DF35BC
-:10707000F91F955A84FCFA4A8CEF8EC2FEDEA47387
-:10708000A6D80F9E43C17D0C8CCFA62D8F4F7F6954
-:107090004F555E3458A84FCF7537DA7F2A0B8DBA1B
-:1070A000FCBCA2FD59E30F3DFBD3C57E50CCFAA832
-:1070B000C787F3CF924F01DF36137FCD13FC26F73E
-:1070C00095CFED19B6D5BC8F2FCF87817EFE29FED7
-:1070D0000E4608F43CDA99855AE066AC5FD89642D1
-:1070E000FB4C923F245F48BAB6A4D452DCAEEB49C5
-:1070F00085CEEBC5C265F3703A166EE4F73366CC05
-:107100000CAAE6FBE4A53C40FF2DA2FFD1E3487E9C
-:1071100036737900B9B917E517EFDBC179F8DB0BE6
-:10712000CCBF3B21E1AF405E4C233A72FCBFECA2E6
-:10713000FDFED875328AFFBE97A16736D153DA417A
-:1071400095BDAE975E9EBF7822E2F561FC08F91FFF
-:10715000F549F387747F5C4BABCA141F9F37EAADC8
-:10716000C26E7DFCF5E1891AD963D1F5C3477699E2
-:10717000D49F11A7335ABF6BCDD793719F3955DC7C
-:10718000CF9CAAE211EC281C233C5C8F8D0BC68F90
-:107190008716B83D9C0E621E4F2E9DC83E84F97F17
-:1071A0004FACF3E3DA43F4FB4976C4E398283EA4FA
-:1071B0003EBBD5D1FEA238F762E14759063BA7DABC
-:1071C00036C8F4DDCDF5AE1C0FE06DC0FB98D3E002
-:1071D0008957FF5FF0E4887D77CE9727F7646CA12D
-:1071E000DF6D18141881FA46F217AC2762BEB6FBA1
-:1071F000A7BB39FF4F8F4387E982CFE66DE4F36F7A
-:10720000F98FE29B910F5ADE4A495E66E2F77AA156
-:107210005764BF529E643BF97D86E8EF5E8F979E70
-:10722000F5027F0847BCFC0AD90EE74BFA7A25D74E
-:10723000D730EF10D209E61DC273F8173C4A0C5E36
-:10724000C5FA20F05DA5039E018F3BECA1BE98AF6F
-:1072500095A6F27C98CBC92FCC47FC8E8087F44E44
-:107260006CFF6B057F6C11F7E81EB6813CA39CB9DF
-:1072700039BCE7F66451BF75A2DEE5F5E195C9CFEB
-:107280001691AF02F0533E66D5ABFDB658E1AF178D
-:10729000F00797E339C2D427987F3923BC45105FA4
-:1072A000295EBE9EB4E841B2DFBA9E64E4B70E0127
-:1072B0003BC207E59A52F74825272AA779CD0AD17C
-:1072C000B17003ACD38837A7C4DB1B3BCDE36EF0B2
-:1072D000782CF710540AFA0F81F5FDA700EF10E89B
-:1072E000E745829BC375F2F1E6EB313ED7BDDE0B7D
-:1072F000BEE8096744EFC7E1A4BC0AB4777CA3A346
-:107300007062FF94E7E32E5D86FD56FF66773F735C
-:10731000BF2F76F73B7BA20BF5D87AD0ABA40E82B9
-:1073200087F01CC9DCBDC906DEF700FE820DFD42F8
-:1073300039EE5C4DFEEE4F7B21DE779ED73D0EE8A9
-:107340004F93FE3BE071F3FACE8303F11E6DA6F17D
-:10735000F529ADE9F48F701FA2B775F56FC50F4021
-:10736000479A77D72E98972F8ABF96E659CB5CA875
-:107370002F4F303FEA4B39AF2133DBBD987F53238A
-:10738000F428E0C5867C90FACF3EB6DC67D2CF8287
-:107390007E43199737E99F0CC50D1228BFE32910CA
-:1073A0007A8B519CE0E4ABFB7ECAEFEDE0F4AA9946
-:1073B000C9E92BE5F52B4F30C58BF6E95D0F4DE4A0
-:1073C00097E146E89EE6CA0D7C1CA8D7CC486EDB48
-:1073D000B26762FE25F2D3989E744B2D6D76517B79
-:1073E000C1FF675F191E463E4CBBBDAB18DF033FB4
-:1073F000103C2DCD9E30FACB642F63FB7D0A5FBF1E
-:107400005890F03277A6E137F38984AF9BEE0CE811
-:107410003E3CFA7EC84CDE6F4D2BF4CBFB21F9A924
-:10742000BC9FF1FBA9057D80D5428E9151BD03E53E
-:107430008823258A47893FD9BEFA7EFEDB3D182F77
-:10744000403FAF86B553DCB4522DED8FFE1ACB70A2
-:10745000D0395BF07F49FF1C7631CD05ED5F872782
-:10746000AEEF93D545741E6AF22085E41C2449C60C
-:10747000CBE8F7C66EBD2191E7BD7DF5DDC1389F34
-:10748000B444CE77D08F53F4E3243B55E8C35F6711
-:10749000833E34F9A5871585FA39FCAD6BB62E57B6
-:1074A000A2F3C4FED06E38AC4CEB4FF6AC886B0048
-:1074B000DE2CF97851FE0D09B8DAB3F1BBD94F4291
-:1074C000BFA6DBCF62490FDF087ED5D829CD11BC1E
-:1074D00052BB3E947CE3F760DCC9E067B960FEFD17
-:1074E000918FD12FC809A95E846B8842F7471F4945
-:1074F00008E6F37B88F938E922EE952EF2B4D19EA6
-:10750000C7E7362F5F2F8627F1F5E5A1245E4EF7FA
-:10751000C68F933D21BED7887BBB5717C5CF071CAD
-:10752000E7B5C6396F15FB3EE06F8DF3A6F1FBE0C2
-:10753000799E32DF2702BB96F05BFCF04CDAF7BC99
-:10754000D0764712BF9F82CBFFC74AE0DFEE52F0F2
-:10755000594AF703867EAB52BEFF4746C08BF9619E
-:107560005509F1F3CFEF15705489F99FAEE3F74950
-:10757000CCC3FD48D017B70AFF6C41D36D2548EF47
-:1075800005E0BFE37EA4CC7B90F42DDBA45AF62368
-:10759000E6E17E649FBFC67FF0F7E23F8CB6F80F4E
-:1075A00072DC583FE2645DA665DF6476D320718F9C
-:1075B00007AF3F87F909EE392BFB59F64FD9CAB40B
-:1075C0002BBBE714FC86505CF874D2AFF2FDC93ACD
-:1075D000270B99E1F86430E58D8CF3061FF05AE033
-:1075E000486421331C6C02FF5D2F178F5B03DD4362
-:1075F000667B3A16AE55DEBFD64FCBED05CF79FF91
-:10760000257E5AE104AECFF05222CC81193BC96AE3
-:10761000376FF6F27572B337D16237CF9D69ADB768
-:1076200045D4DB22EA5DCEFF37DBCBCA20D41BBCBE
-:107630003FF97B3C3967DEA2BCD3F7BCDC0E389E39
-:1076400014D881F2B856E4E96FF9CBA1CC39685F60
-:10765000FCAB9DF2048A362F598E79D4EE66C5A014
-:10766000734AAD563EFAC7A5CD03E7023E5E1274DB
-:10767000AAF4F37954FA23FA6037E675F3F1FB378D
-:107680001F5034939EE85FC6EBEDF3DA2D71F703DC
-:107690005E7E8FC42FBD323E183E70532AD60F68CF
-:1076A000B8AEF4C5DFC10178FAD6323A07D57734DF
-:1076B000B7C7FE71F416057F974BCE73A56D5ABE02
-:1076C00001ED56A627FA514F671BC1D7719E95EF62
-:1076D000452218BE19FB5E9B86FE92DF081C457E84
-:1076E00095F3F2A9465F5C6F12DFE3F03575C721B1
-:1076F000B89E666C8DF05FB6723B56654719B773DE
-:1077000069BF367DD9505A2FE47CD25384BE4D6771
-:10771000C1DD646FB395B4DE39F9FA99BE8CFF8E82
-:107720009EA467347E326C24C64F06AD8D68B3A12B
-:10773000DDAB9B6C71EFDD3825F00EF3F800E71739
-:107740004B9F5ED71D51CFDE4B5C4AF27BE294F833
-:10775000FE1E638FD0F7A2CDA9F7905C36E8744F78
-:10776000A2C4BFDF28FD23C2D3B7798B82B83929E1
-:10777000F2194EAEFEA982F6D6771732438DC34F6B
-:10778000DDF2BA74F7C0B9267D03FD133DB6C4E43B
-:10779000A74BFFC49DC4F5F83CA3544D4AA37C619C
-:1077A0008AE32DDCCE7F8FA3577C5C21BE9432EE22
-:1077B000C754CEE0BF475AB459237A5734F0DF2379
-:1077C000ACDCB98BCEE3B187981FE5BDB2799732B7
-:1077D00017C6ADD8B94B9967C25FBFCA30E5755FB0
-:1077E000E59171EA08DD3B16CBD718DFC7F5FD88B8
-:1077F0008BCB7B47913B8471EB0E7BB012EB7564B6
-:1078000025FA717F54E2FBF55D37D2FD079EDD8ED0
-:10781000083E57DAB6663AA1DECAAB753FF291DF91
-:10782000080E45BCA468A52DD83E39D5E3C7B8B726
-:10783000CFC146D23A778578181BC30F631FE27217
-:10784000724F9257DA59946F3531C923ED0ED24FEA
-:1078500047EC7C1EBB1987779B373016E16147F9EF
-:10786000EF29F4AD8C2898A7123B6E949F02DF4A53
-:10787000FA06FC0DF6928E7ABD42E899A2CDDB9510
-:107880000F4D704F456304F973E71605E32AF09D29
-:10789000F40CD467980FD577278F2755C0F7792632
-:1078A000BD22E71147BFDC86F0B9DF6B7B8DEB971C
-:1078B000088F230B7863E9797F12B7DB4A6059A5FB
-:1078C000F77A6828FA9B477213A83F29EFB1F2793B
-:1078D000BFE0F3BE9BB62B3637C5DBC9FE92F0C9BD
-:1078E0007AC79326CE491A837868233C546DD268B0
-:1078F0003E93F5D2C18B4CF2B048F477F0AEF7E985
-:107900005EA00D3F3F46FC58D5A470BBBFE9987EF2
-:1079100007AE2BA1E754DC1FB9992FE5EC71715F1D
-:10792000D6CD2D5CFF56B5ECD2F07E49C9A739679C
-:107930000ED23D5B55CD0E86FBA5C07FDF43FCC458
-:10794000F2A9C48FD4AFBDD113F4103FA710D24514
-:107950009C3A9833DD13D5CFDBBC627FD4CDDF6F8B
-:1079600048E2E528FF04572559F4AB8BE422E7CC25
-:10797000C883980F5AE557E85C656AB1F87D321301
-:107980005CE6F331B1FA11E3E13C7ED29E3DDD7459
-:107990003EAE5BCF8BF64F20BDF9FB087FCF7271F7
-:1079A000BD96F0C7D2EF90B0C7E3F0593829CE3A70
-:1079B00026D7F59CA7776B788F92E49F9B91EE2654
-:1079C000FEF95912BF8FF767491AF5FF7811DFA743
-:1079D0007ADCCED7AFC7EB9D94BFF9FADD3C9FCCE4
-:1079E000738F1EC1E761DBEC4AFC7EB82F8763A56D
-:1079F0006D199DF703B96C4E22FEF132AE1FB93EF0
-:107A0000DCF012D767952137DD775A19BC7D2EE55A
-:107A1000D9A6BAFC743F68F035FD0E4F4FBEF2EDAB
-:107A20003E40BF8B7C7333973F4907D0A7C45F525A
-:107A30001E245EA3F8E47897F224E9B14DEE0B0022
-:107A4000BF70FB88FB23F94CA5FD9F3267E0089EC1
-:107A5000CB2C13FBA5F9E2775FE47EE96C4197023A
-:107A60005BE9AF719E3DF64BAFD0AEAE58FAAB615D
-:107A7000180F29CF3C4A4F29B7E0F759E4FB7D4165
-:107A8000F7C3E2F9B1E09B8AD1CD2497151FD592B7
-:107A90003CBBA770BDE67ECFAA8F195B27E6BB96DD
-:107AA000DA4F4E6C2EC1FDC6C93F560CF4877B835E
-:107AB00073019E5343FF68D321EF2CC4AFF87D2997
-:107AC000799EE70BA1273A76A8E2F7366BF54BD9FA
-:107AD000DF97EB8F458E2B74EF89F0A93A76168FDE
-:107AE000FF18FDBA1D49F4FB279FEDBCEDFB1FA756
-:107AF000E2EF8BDCE0473B21757929F14F579ACBB8
-:107B0000BF95C73DA7605CA7BEF99017CFFFFC6F7C
-:107B10005968C8A800800000000000001F8B080002
-:107B200000000000000BD57D097854D5D9F0B97359
-:107B3000670B994966267BC832091050499884849E
-:107B40007D9924844516270805641BF600D958DA68
-:107B500062A57F068388886D68AD225ABF01C16225
-:107B6000B53560A441020EB208553F470A165BB412
-:107B70002322B284648AADA55FF93EFEF3BEE79C82
-:107B8000CCDC9B09A85FDBE7FFC3E3733CF7DC7B3E
-:107B900096F7BCFBFB9E33975FEE5760B01362B65F
-:107BA00068084920E4CA6BF21AAF8990877FF1EA2E
-:107BB00088A185842CF74A71064248EBEEFFF89FB6
-:107BC000D478422A76D658245AAF7FF94D7D80BEAC
-:107BD000A7F16E67CF77C75AE0BDCB2F6C1941FA7A
-:107BE000D2F6C67A6CBFF2C276ACBFF58B570FFDEA
-:107BF000177DAFD215E380F7AEBC76580FCF2BDDE3
-:107C00005A67232D89FBA87EAA99969E976492486D
-:107C1000C878C2FE9EDA73586FCFA5F5463A2AFDA2
-:107C20009E4CD77B7B65D1EF1AF7681798E00D2F34
-:107C3000214574DC5FCC1DEC867A335D444AE8F95B
-:107C4000463DF1186DB4EC4648142DAF169B3C52DE
-:107C50002C5D5789692394577F15351DD65BAD0F71
-:107C6000E458613E7D8913EADD011E4530CE0A5D90
-:107C7000B509BFC77E3ED41102652EF1908B7DE819
-:107C8000FA09D979AB3F8CF76B841F7D6F50540193
-:107C900021D3667D2AC17CA2FBD6EA96E33C5F66CF
-:107CA000ED74D5E1ED0356D3F1E8B8B7E06F64A801
-:107CB0002CB298F07D0A102C539BCAD3ECB0FE78FE
-:107CC0008303D62FD6975AE1AE37D3E7F7AE763B8C
-:107CD00064BA8F6F5C3A35BA3BADFFA28FD45F8632
-:107CE000D76569AE8BF65FED31E138556B4AC867F1
-:107CF00074BE636017E9F78916123F84AEA74C4B38
-:107D0000E24D5012725A5700FDEFC276BB8138091E
-:107D1000C503FB9BD376ADA39F3CA573A714413F3E
-:107D20001BFD7A3B943BD9FCE9F7165301F6671922
-:107D300002DF1BC94AF8AE7DDD84F84D12F6EBD7A1
-:107D4000D942F3262498313597F55708701AEB99E4
-:107D50000EEF13BB1ED777055EC17DF4E4CDCE8553
-:107D6000F209365F0D7103BE24EA69897075679563
-:107D700053BC596429765B8A42656237D6AE86EB7E
-:107D80004E68A7F0BC6071624976C71132B8F37BC8
-:107D9000A214F07F6B5A9B3E40C77DF2C0A788B704
-:107DA000D580B730BEFB821ED621F076217C42F70B
-:107DB000E1A9FD9F22DE2E6C96103ED5CDC5FA05B9
-:107DC000B4BC5AE7249F69699DE3DF53526031E0F8
-:107DD000B5677F94651785539BC0CF864F2FCAF434
-:107DE0007976738A5D82E7FB199E1ED3683C00A7F3
-:107DF000633BEED95E2F85CF731DC247AA2048276B
-:107E0000D5B5C46BA0EDC53F5F7D6A1CAD5755105D
-:107E100007D079B50A8FB29E3FBF01F0C55A490A13
-:107E2000A3ECB0CE4F4677A7FD57579222A0D3D4EC
-:107E300051CEFD5027CD12E905F50AD74218FFDED5
-:107E4000F8A50E99F66F1DE56A82F1EE8D1FEE9092
-:107E5000697F4FA5376E30D2764F19B1EC0238E802
-:107E60001A4AB4B4FE5499DD422149E1B63319DA15
-:107E7000491FBD6317E0B17B6125F4579D3CD301D9
-:107E800078D289FEF7AFEB03F3ADB6777344D1F741
-:107E9000C7374B8857C4632230FF6A0A5FA88FF741
-:107EA0000EF5C27CAE71F80938B6E9FC73607E6DE0
-:107EB000AF1B8887B68F1FC5F0D53AAA11F9C7DB6B
-:107EC000FBC79C90F2427869DE67F041DDA6B548B9
-:107ED0000EE04BE47E03CC67019F4F838ECC75D1BF
-:107EE000EFAC63593F3D364BC82F7E0DF49400A58F
-:107EF00086977A8EE70DACB478F25C141FAEF1FD74
-:107F00004734A1FD2EE7F852B5D087F454F90AEBB7
-:107F10002FDEE0CC5F1586BFF1A504E978771499D0
-:107F20005B4E9FEFB6B2528DAFA7395D673DBF1272
-:107F3000F77D01DD77D8D7D4CDF439C08DE205C007
-:107F40008DEE23E2C1BDF14B70DF166C961EC07D35
-:107F5000F40C20504F8863EB54F77F96F3C5DD5146
-:107F6000AE4289F6174C303B7648301FA7260AEA06
-:107F7000F956C70E02DFBB76C2780949518EFA3036
-:107F80007E4588AB5043C7B9946866FBED7D5F3B87
-:107F90003917E8D18EED0932F111E43F24DB951B4E
-:107FA000FAAEAC07EBAF8CF737A1C19347B2193CDF
-:107FB000102E1C1EDE75DDA687F3D34F383CBC7730
-:107FC00091E9C0378EE989C908FD5BE838B4BFC4C0
-:107FD0001D435FD884F3ABC77D7BDB62C1B22CCE7F
-:107FE00055580B2CB8876B35C045AC530D8F451CCD
-:107FF0001E6F4D9B93AF013C9E627200DD3D794048
-:108000009A8F78ED3152A204BC677448E87E005D17
-:1080100010B716F7A3BAD6E58D8CF7E54867D5F10A
-:10802000518E2809F1DE89F2CF63F232BC67F22F5C
-:108030007A2C9357C027CB733BF303C16740BE0133
-:108040003E0BBAA81E11C881FDFDBA7CA54DC7E83C
-:10805000BC8DC201E848D08DF90D462F9BD6D98B37
-:10806000A17D13A5FBF0FD3EAEF720FD1ECFEEE691
-:10807000807E619E2E7388BF67585C362B8577B5EE
-:10808000C6B7419B15E2C7D56F3C96E38E807F82D1
-:108090001F1BB58CCF19BDD15ED62F1BCF48C16D2C
-:1080A0002EC0D203F2287A0D838FBA9F5E56215FCD
-:1080B0008D960B548E4FA29B14DB8390B11A772FB1
-:1080C0002BEDA7CA18384E779664AC09EA611E8971
-:1080D00020BB807E76447B816F252612F7DE08FD6B
-:1080E0002659191F10FBD26063749418C3DE2FB693
-:1080F00032FE50686578792F2FC5FC05FEDB35EE22
-:108100004F89DCB51C13DFD17961BB980FFD7E234D
-:1081100061F217E79BF870CE8E4D61FB11A2A3BBF5
-:108120000A609F7A6CF669E79B42E30879AADE7FD2
-:10813000983FD00FACA7BC6FD7EF351C66F4A8C62C
-:10814000C772CE1763AD84BDA7F3FD15E96A8599A3
-:10815000EC80F96D25CE383AAF9A43BD193D38838E
-:1081600039D0FF119BFB15D88F81A3389ED3E7939D
-:10817000E9F3E55AE231D03D59BE5BE70D1819CD60
-:10818000DCA2FF95D858FFED66A347A6787EC6E629
-:1081900076037E794A88C30772E907947F00FD1150
-:1081A0005F11F0971A1288013857CBFE1C42F77FF7
-:1081B000B0C9BD08C63BAFF167C073420288AFE7E4
-:1081C000A262F208EDAF49EF4BFF3ECCFBA44C7628
-:1081D000D07EAE13E77858C775BFC6E6A1EBF8B8F6
-:1081E000F977BF3A40BF9A7DE0DAEC87004A9BA25C
-:1081F000E73C4BCB59468D51DB3F048F73E6C8FCFF
-:10820000F5871C7F12EA99DE155C67F0027CD4EFDB
-:108210004DB0B1FDAFB9914A3C71E1CF191FADD15D
-:1082200006F5A042D6DCC8201E3AEEC71A52D11875
-:1082300041CF0C5819FF6AA2A81FA9FD738E67BB16
-:108240007524672BCC673BE583003FAD1DF945C521
-:108250004FB31C9B68B5293B781CF488E0CF24E41D
-:10826000FFE7748CEFD0BF29C60121F909EA09E8BC
-:108270008715168F4F43F946C56AB34FCEC3E7DA69
-:1082800061B0771E8B16F8E07C2E1717D4BEFD77F1
-:108290002986B66B897118FDEE0BD3C218100B8BB3
-:1082A000BFBB2A1194EFA4590D489F848CB2803E25
-:1082B0002E3927C8B7A26FA7CF69516F477CA1FBA2
-:1082C000EBB2B95E80FD9E15CBE03D6B55B4D71384
-:1082D000C6FFA671F8A8F16C37E0289DEF2712932E
-:1082E0002BEA715EB595DC07789714E3FA35F6BF93
-:1082F000EA9A829FB54981179F057C5C6176EC62A2
-:10830000DD66B8C2E8E51D31EE0D0DEE5F7BBE3FC8
-:10831000674D16E07D30E3F714CECB5B0C168F1D56
-:10832000DAF58AFD3F5F47195F4EA83EFF52CFD175
-:10833000C404F0776C007C58B0319A78FA84D60186
-:108340000A37E077F50D82FDCC6F79FB2CF0F36AEC
-:108350006D00F167BED184FB537D438BF3201B7509
-:10836000AD01F13D95BFFD629C2791BE1E1D66BD0E
-:10837000780F7D98449FE3FADDEFC3BA9F8E8E217C
-:108380004E462FDEDE74FED78DF6581B85578D9E28
-:10839000E2473FECC6650CD3AF489A59B9FF2D2789
-:1083A000FF0EF3596874EB41DE2F9A5EAB07BA9C5F
-:1083B00015EB2BB2F40DDFF761F2AD7BBEFEBE37DD
-:1083C000713EF4B19ED245043AFC9CC37F02E02486
-:1083D0005DDFC7A98C7E3ECE20157BA1BC9B96F4A9
-:1083E000BB8FB379BD80D5D5FD44D9183D7F9CC7DF
-:1083F000E4956725931FEAF7FEC1C773D99C5F0216
-:108400003CC573A78D3D7FD5E6FC0A9E537EF85F81
-:108410001C5F7D56DADFAC370D88AF647D3007F620
-:10842000B1635D397CBE8991E7956163FC98F62B59
-:10843000D98AF03D27EAED87A2BC60879009943F76
-:10844000033F5E994E801FD371A36CAC5F9F15DF15
-:1084500033E03AC846CAA729DEB617D9715F361588
-:1084600053FC043E71D060013E21F049E0911A7F37
-:10847000126D42FE31397C1FC86119E570A28DC9A9
-:10848000613DD039ED51CFF4C19EB8DF8867F2D796
-:10849000DFEF3D46B68F94DEED3694FBBEDC707A9E
-:1084A0001370167CF2E36E4ABCD8CDF9601F0EB78C
-:1084B0000E38DBD87BF13D98DC13F6C120BEAE57F9
-:1084C000383F17A5906303C72AF59257B85EF08A24
-:1084D0003546EC4B21AC5FC8BF4EFBFD1CDB6FFA91
-:1084E000DE6058CF2C43704E1C955FDFA17A91BEA1
-:1084F00000BF6B82EF3AF9294631B95BB3D24C40E9
-:108500002F28B55918FC0B8319D01FE913443E34AA
-:108510009F507E23DD79FFC02790426964690C93E8
-:108520003B924C07049AE943ECD01F85F7245B513A
-:1085300008DEEAF1CE4113D503A7DB242DEE573E2A
-:10854000C987FD9AF3C197E6D9B4CB6B16A347430D
-:10855000E5C87735EE59D04FEB832751EF3FA7F7AA
-:10856000E5349822B4EB7DCF3F2D85DAE7BE247B3E
-:10857000F494CF34F95B7F368DE2E57CBFEC80214B
-:10858000E7AFFDEB7B03419FF6EB1C60D7527D62AA
-:10859000B316E65DCBF4CF731AE5FE5FFD1EDB5F1D
-:1085A000517F90E30BD5B3B46440885F093D6129E6
-:1085B000F1F5027D620171EAA13CBF62C90442E1AA
-:1085C000B7C8B41AF9D8E595E3507F5E4C3CD8BEE5
-:1085D00060A3EE7CB87C59D4A0AC2FD9AAAC2FF5FF
-:1085E0002AEB42FF4A288DAC57BCC8F9D0552A2E39
-:1085F0006EA7576CE1785BFAE884A791FEFD3A62BA
-:10860000A0EFAD3E589C4422F42BCA9A1BD9C41B40
-:10861000268742FA470EF1F687FE6EA23FF079AE4A
-:108620009F407F60EFAE8E7226815D72B524F2BCF2
-:10863000B7F179D7DCE8A6E8FFF94E7A4E0C8E53F5
-:1086400073C38865E77998F0FBAB8B238FB3BB438B
-:108650009FB228E469E8FB7826FFB83D2FF0A1E639
-:1086600046323E1775A16787BE4BC3FEA860B35C58
-:108670008C0EF1235D37360F81FF9F49C49882FE2F
-:10868000B12DDC2E71E4819EFB19E851407F63EC33
-:108690008702748A0B1E1A9CA3CD0ED1877A1D14F3
-:1086A0008FAE04C2E4FB219B391EE5B28338605CC7
-:1086B00081DF731E2C8B75D3F9FE696D6992BB6FD8
-:1086C00038DFF4E0F8D57AA1BF9914F298A8E4F560
-:1086D00082E693A89F2D34BA7280C97C7EF041C493
-:1086E000EFC5C4950878DD7EB07786FB7F21A7C5EE
-:1086F0007CEEF7CCD3317D9C122DA5B7C97C3EF71B
-:10870000B730FD506374EA701C27B15B12D1E46688
-:10871000F3A5CC524BEBC33BE60FCE434286F1F9B7
-:108720004BF03D85EF705E92F9EE6498B701C6A5F7
-:10873000E345116F3294F5831D7628474A2E2D9B11
-:1087400007DBE7D1A4360DDED71803325B279D4146
-:10875000227CDF012FAC9B797DFD94EB7316C173F6
-:108760009319F9869ECFE316F03F23F21323ACDB77
-:1087700060F25D86759979E92961FAB6279B38EA36
-:10878000E96BDD482381714DA66B1E58AC855824DA
-:10879000A84759AEFBC0EEB866317934FD902FCAB8
-:1087A00071147EADD2BB8B615F281F667EA8AEDAE6
-:1087B000B53EB477045FB3F1F9D573BE9642181C89
-:1087C000E289EBB093F2859F98174F2031208EDD20
-:1087D00038FE3331634FC07C01F028AFC76ACF87C2
-:1087E000CB8B049756C1B792A62BEB296E65DD485B
-:1087F000CE59007F259F2BF9561CDA717DC02FA31F
-:10880000E3FC624A37362F813FD9711A853EE1E297
-:10881000767DB54D4FD01F986834927EA85F64C7AF
-:1088200031FDE213BAD3D4FE0B221FCE1FE9ECF5C3
-:10883000330AE70D1FC88E87E93E6D30DBD76941EB
-:108840006F9B21313D5DDBE8033FCFF63956C726EC
-:10885000688F72FEF8BFA1FD039980DE5403FE7598
-:10886000A4774B317CB73DC382EFC59706D12F1A51
-:108870007C8CA05ED4094F6FD2F95378BF00750A83
-:10888000DF9A8596E5AFD0F7535CD10E29AC7D27F2
-:10889000B4D3794A1C2FE0F9C80160C7B2BF1E2DBE
-:1088A000F97E27F8299C32CAB59A96FC23263A8F7E
-:1088B0001EEE7C07A06DCF161E47893778591C81A4
-:1088C000522D9DC754239B474D4BF17D45B4BDA709
-:1088D000BF3F817842F409FBCC4A68D250FB19BEF5
-:1088E0002B8946FFD569EE47229C1F0C54D1DBD063
-:1088F00010FE637BBEA853F1EF1CC0DC13588F67DA
-:1089000074E020E28FD1E71012FA83EF4B43FD2190
-:108910003F1A156A0ED11B5D5A81D1515F49DF3B69
-:10892000563E06F1B006EC27BA1F03B5BEC340DFC2
-:10893000437999CF4B32BF01E1B9699D5306B8170E
-:1089400011B7BC85D60719FD71400FC38C8175091D
-:10895000B4BFC1D3E72543FD20285945A86779C096
-:108960003F6F3569BCEB7013F31D4037D3A6333F1F
-:10897000EBD4E9462FF8EDA76A098B6F69DD59DF63
-:10898000A1EDDF99C5FCBB509F15E63F11F18CD3DB
-:10899000D41ED913C19E3C18C7E493F8BE66BD5ED1
-:1089A0001137DA1F67C2F6FF881BBD360EF1DF9D57
-:1089B00005F4F7701CD7ABFA903EC057C2E87E03AF
-:1089C000BCD75AFC4E577C41D9CEF9C254E74F75FB
-:1089D000A88F73FE20F8B00BE8907EE7979C3A8052
-:1089E000E747250CFEA78A97227F9846DCF89C2251
-:1089F00088CE15EE371A1BA6C7D071A6BA947ACDC9
-:108A0000B4E96A3D87E1AB1877865BD93E59E8A99E
-:108A100063957AEAACEFDFB4A2FC4D7AB1EA562650
-:108A2000C649D0DEAFA1FBC4E2245A163759AFF7CE
-:108A300082BE53D3BCE25802D0D15AC2E9688FB487
-:108A400010E3387BA44561FA43F74AAF047CBF3793
-:108A50005D931FF73588F1A1D33AEF61889B9C5E47
-:108A60004A574CE77944CFE28F47A38807FCCF02EF
-:108A70003FCD9399FF94A231C641D22CD10ED0CBD9
-:108A8000376A0AD0DFBA31C6EC08F76F6E5AE72EA4
-:108A90000BF7B3DA0DA4C0C2F126921D7B8CF3C391
-:108AA000A724E6EFF6CC30A2DD96D0C3A5882F240C
-:108AB000C8E42CF80DD7C6D951DE3EC5FD1A109F6B
-:108AC000EB4F4BAF4405627CD8F732598F7E461589
-:108AD000FF498873A07F3F213617FDF4D35BF277FF
-:108AE00022BF3145397A49A1FEA7BBB76B1781FE7A
-:108AF000D4B25DBBD014C2BBB3025FA34934E06BF8
-:108B000087DF6EAF01FD76DFD5B8CE015E56EA7D18
-:108B1000794489CFF8BC2B39B684E38BAEC4356376
-:108B2000119D4FFB7B7AE6C75A4B905E5FDB6F452A
-:108B3000BFA376324179B2BE98203EB46F97504FB2
-:108B4000FEC25A81FAFB7AA901E5449B6D34EEDF3F
-:108B500032D351B44F2B9ED39D0FD7BB96ED54D635
-:108B600097133FDAC795AF74C267E45F823F563709
-:108B700029BF233D95FC319FF3FD0297E3FE329818
-:108B8000FA74470F661F139F81AEA3E85D3DF7F7A8
-:108B9000CE627293BC2881BED56EBE24333A67FC88
-:108BA000B888F7A79643455C9F1A41F916D89142B9
-:108BB0003FA2EF63FDA8A6454ED684E655C8BF1375
-:108BC0007A99E0DB625F8A07812D4C48463CD76F7B
-:108BD000B24936EC2BED1FE9818EEBD1DBB07F0F74
-:108BE000D85F43F97874DF3D20673D1AA317F0681A
-:108BF00083548B7CDA4838BF96DCF5F0F16F3C1E6D
-:108C0000E4DB8349EDFD13B2805FFBA3011E141F5B
-:108C1000B2E3C3F0A49EF832F6480A7CC1F656EBE4
-:108C20003B11F145C817DF474CBF184F570CFD9457
-:108C300041E08696472566CF8D313DA985EFDFD18E
-:108C40008C437C184BBC5A985F9945B9CF63929579
-:108C5000F571F64E7820C3B84E0ECFF17D94ED4EEF
-:108C6000C1D78892AF65919BB8CFE4B1E3DF05FB34
-:108C70003E7A0DE9037A07D51091DED4FC6054BC2E
-:108C800049A11F85C53D46C527748E7BB4733FEE51
-:108C9000101258FC8AD4195FDA8EAD9193C3F04A52
-:108CA000E0F11B3C4F427A93C7570B995F2F24E7A3
-:108CB00019BE0CE0B521806FF4FD45024F32492604
-:108CC000E0C9F0E6289F4CE19ACFFB1902785310D7
-:108CD00092E73E8DC9AECF06FC706C94E5CE7A7BF0
-:108CE000A2CD8E78D25F23E4BB238EA07C6FACD75D
-:108CF000C2FCF70FECEE3629F06229E28544F1025E
-:108D0000E9AA935C54B6ABF046ECDF09AE2F8F2195
-:108D10009E9E301E656347415FF66531BC29234E38
-:108D2000C493B7B3C7F1F8B35B8BFD10A53C2C35EA
-:108D30002AF1408D5774444DF8B86A3CEB0A6F3203
-:108D4000016F843C8CBB33DE3CDE35DE3C7E3BBCBD
-:108D500051E38BE0277BA22CA5A097D65448C88767
-:108D6000FBBFD7B31EEABDABB2308F658FD5817A1A
-:108D70006B4D2D6B2FF43B65C873E9B19AB767B99A
-:108D80004AA15EB386C51B8A4EB33C989E6B597B45
-:108D9000FEC3B547CC20DF3DECFB372E6F906368F8
-:108DA000BB7703FFBEB8A114EA351BD9F75F40BCFF
-:108DB00088EEEF80B3DE7A787ED7E62C07333F99D2
-:108DC0003E3B92E3E91E69EF11FCAE817DB7E4B84A
-:108DD000B11B413D98E9AD23F83A473EC7D619FF8C
-:108DE000D9BD63ED147F17053DA8375DD4540E40FF
-:108DF0007ED3859D592C35A44149F106F98CD34881
-:108E0000F13A9BC51377D021DE8E677AA088C341E3
-:108E10005E40781EC0DBF14CDE8BF7126D84C58D91
-:108E2000B799D1AF2BE284BEA7890474066BE4F234
-:108E30003F62DC704C8F5A8C178EC914F1C2807659
-:108E40003E1D37FFD697A323F951FE938F7B89E709
-:108E50003988E715DE2C0DE0C51E4092540052F50E
-:108E60006F416FDA037E5426343C6410EC2BAB9FC9
-:108E70008B5FB6692335D297686AB51E103219D454
-:108E8000FEA25D4FF2135F6C4CE7F98FD1121FC841
-:108E900027A265F35F5C4FE5A014E24B5305DB1995
-:108EA000D60BE9740ADFA7CBF15CDFE84FFA03BF0A
-:108EB00099CAF7ED3BC65A1D93970D3A15FD5F43CE
-:108EC000FA7FA64BBD59D9AEE20F157CDCC55C5FBD
-:108ED0005E4A82A8175C94BC585E7A86E9CBCB4D7B
-:108EE000A751AF68DFC6F4C44A1240BD43EDF75B3B
-:108EF000BE5B59AF6A54D66B9A95F5F65C0F8ED36C
-:108F0000FE4CD500F0BF556C7D0FFDBB15824F7830
-:108F1000957C822A488C4F3C7D37FA6D3446CA27AF
-:108F20000A015CDD306FA43F71C6013F00217B8BDD
-:108F3000D61F834F52685DE38A49403FD6D8B80BAD
-:108F4000627C19E3B2EF39EDA17DE9B00B557C22CB
-:108F50005FF8637ADAD05F25F8463E617242AD175A
-:108F6000F54950DA3942AFC807BD82E2855F63F246
-:108F70006A34E17A8417E98FDA8BE3A3B201655C86
-:108F800032D4FBCF2834F27D27AA7DED9B707B7B0A
-:108F900049D9AEDA7761AF0CE0FB3E83B8BBC33E84
-:108FA0004C21AE6320174E7D54A1B0933EFAC368A6
-:108FB000E147417BE99BDB494EF9DBD8491DFB1DAD
-:108FC00045F5465A964E1ED7EB6710DF6E8AC2BC37
-:108FD000CD1A89ED6FE28CD319E17EC3537524411C
-:108FE0001B46EFF5E30C4688EFD5EB981D3179FC75
-:108FF000C703E687F18B178CC52E80D706C9FFBD46
-:109000003F825D7152269817D39280FB7DBD813ED1
-:10901000A77876FDB97B1C1EFAF8AA8EC50BBF9007
-:109020006A17432A9398C7E235BF8DD252F9752546
-:10903000FA10C683CFE8DDB301EF96BDB30FFD9103
-:1090400095A077F708F5DBB5DFD1837689FE2D266D
-:109050000783523707E625104F4E789C685622E367
-:10906000AF676CAEA5307F21E784DFFFDC8A31B1CA
-:10907000200AFE429CB1109F94284CBADB3A8F071D
-:10908000F900EBC3FCCCE7A294F105517E2F81F9E6
-:10909000BFF7012DD1F1D2ACCEEFC3FA2E717BEF29
-:1090A000128F535D8A6171AB871318FFDDC7BFDB79
-:1090B000CACB4B3CAE75C9A6B413C57BDBF877179A
-:1090C000EA8CC6F561FB687FDA50EBC53C289EF759
-:1090D000B19A30BB68BF75FBA6B0F8C1AE84E27D23
-:1090E00030AF841E4E7D0AC06F3F93BB1047867819
-:1090F000EF308BBB01E0556D274E8897127B407F88
-:109100003FC40DC1CE447D81E1497B142BC5BC76A3
-:109110002594EF4338AF0820DFEAA897337EB82BB9
-:10912000C185E3B64F15EDBCFE04AB13EE2F10FE68
-:10913000EBAEE258EAB815CC18F5EA28C6B7D4F178
-:10914000EAD9826FF178F52CCE8766B7307FF81CAC
-:1091500023D9D09DB6CF6D4962F6618C274711AFF8
-:10916000F6447FA33C05819FEDE9FE8E38EBB6B057
-:10917000386B158FD35589F53529D77724A1CB388E
-:10918000EB9184087156753C7F1FC8F39E2178AE21
-:10919000B4B0F597C995A57AE00F0B09E67FAF3C0F
-:1091A000B9A0DE48EB2B1F034F1FF221D44FAB3881
-:1091B000BCBA9A5F824B43EC0ABF7037620FB3832D
-:1091C00053DC36451D35DEB0FCC9EE15A98AEFD358
-:1091D0006BB315EF67AEB95BD19EE52950D47B6CBC
-:1091E0001CA278BF574389A2DE7BEBBD8AF7F34907
-:1091F000762CFA8F4EC8E01B217779272BDAEFD92E
-:10920000FD80E2FB2F48ED53C3E87B4D518CFF13EB
-:109210008FD3DF7740285F38B771BEE2FB7AA97140
-:10922000808FBEBFD0CFFCEBFD9A9729FABB1A33D3
-:109230009AD90D3C4E584BFF31FE6D9751FF699600
-:10924000C836A973DCB0A265CB86EE2452FC90C967
-:10925000F56554AE83DEA4D62B0C893C8E944A521D
-:109260006F85D155080F4CA8775D7F4E46FF593E5C
-:10927000C9797A18C24747BCF6CEFB759D30BFCE80
-:10928000F557CC0EF08F2D39B900F1CF90ACC483D7
-:1092900028BB120FA2FB28F1C0EC50EE7BEC20E5BE
-:1092A000BEABE16C752AF140C051C0396EAC122FD3
-:1092B000047C07D17F00DF02123C8EF9D15EC9E148
-:1092C0002311E2B2CDDB711D77D2D3F255F0EC7FE2
-:1092D000D4596F4238B17C29A11719B85EA2F69310
-:1092E00077F85712B9DEC3FB117EED0D9207F59C9E
-:1092F0008EF8D5205F862F0BF49D5AC2FC23AEB2A8
-:10930000C4C87E347CDE951F4DC051E831CB418FFF
-:10931000A1E32C226EE44B17B81EB3C4F424C6019B
-:10932000AFFE81C1B78278915F7FE3B836D50B4934
-:10933000987F510D47A945F299810E38DF4E252DB2
-:10934000826FBB31DF81A29D7180229EA0D43B89B8
-:10935000530AE74F420F15E309780ABE25C633903A
-:109360005A3919E840C5C7481F753C43E9E7107EE4
-:10937000111C2C2C6E31B0231EC1ECC2909F8BF9B6
-:1093800035E4CCAC7A02FAB645F831FC33E1B9F0F9
-:1093900063A8EDF93BC541EFF7488167B33AC73F92
-:1093A000453C952EF3B33FD28F8749F674186FF280
-:1093B0001BBD138826921FCE71F600ED47D604E33D
-:1093C000C2FD63C25FFDB614C0797F87381F21617B
-:1093D000FA4235691C3D330BFC9D546EC540C9FCF7
-:1093E0003CA459AD8FB2F8A186AE04F07B39098B4D
-:1093F0000F6685DAB12E77AE8BFC943BC9F75E49D8
-:1094000016712E2587B533FE26ECB5AEEC2311BFC1
-:109410003FA6A7302908E5A33426723F561EC9830C
-:10942000FE295D352526803D4EE9500AA7BB8EFCFE
-:10943000156CEF4477AAF58BF8BD6C2E443FCB82B8
-:10944000F0F57E0D78083DE2065D1BACF7478976A6
-:109450002CABBA9DFBD009CD857E451E628D9EE565
-:10946000FD9246A5FE7C3651C459999D71273875E9
-:10947000BD0F3C9F8BEFC3D7D587443E9780DF2736
-:10948000820F86E07D5E01CF0E7BAD03DEE723C158
-:109490005BC0E35A91FF45D827D97C3A11E09C1470
-:1094A000E3FA02F862FAD9C04549139A5799DC8A5F
-:1094B000799CD79B65B48FAA87B37C9EEAFD18245C
-:1094C000276D2D068C0356341F41FDACB58E32D26C
-:1094D0009E5DC3A963BD2A787765AF88F5DC52AD80
-:1094E0005FE487407C3FA9E8B67050B67338887C4B
-:1094F0009632B96F6C20CC2EF1F17D8FD2BAA29248
-:10950000E8F885BF4B8B01F894C92DC753010EAB0A
-:10951000253C6734D2403CE0DF4FE1E7CD06056AE9
-:109520001D160A8FE434139E1BEAFD5DD905F1CBAD
-:109530008F57AFB2C1B9A82B7574686A77F49634A7
-:109540002EC437B2F7931F14425C6D16E617CF3660
-:10955000B0787FD6F7A27D3D289F78534F8C406F1F
-:10956000BAEC5A3C5711B4CA686FC4CB6414E09784
-:1095700080737C345B87785EFCF39D12E42189E77D
-:1095800023EB83FD57D2F273D8F784D03A4796067F
-:10959000FBD79A427016F97D441BCC981C461F4796
-:1095A000383CAA13F41B401EB619B91DC8ED416220
-:1095B000D1221F59CDE3EBE77A11E2C77E7C66C862
-:1095C000A7AA8E72C60E04FF16E40FD0E22F16670C
-:1095D000AC15D76F47BD7935D7AFDA787EF6EA712B
-:1095E0002549604F25D447CE631A9DC4F4FC4A1E1A
-:1095F000F716CF2BB53ECC47AA847CE1B0FCA86F10
-:109600009A2F2CF2C4BB8483554BB4140ED512711F
-:10961000DDEEBD03FF2347B477AB9234B7CD635B78
-:10962000C8D727F2D3AA213F8D3E5ABDBF388944FF
-:10963000E8AF43DEDC18A2C80B13F9CDD53746607E
-:109640005E58E9A3AD78BE0FFAB19B4279695DC15E
-:10965000F948229B4735E48BF50F7FCEF847A8FFEA
-:1096600078DC875F0200C1CFD12CA31FF697273487
-:1096700063774498EF16BEFEBB13B4481FF7F88813
-:10968000737B84F1C57BE2FC07C0B93CB7F3FC9A5D
-:109690004A027360FE90771A69BCF549CCCE16F386
-:1096A0006EB20516733CC7F3171D758B721F5FE012
-:1096B000FBD8746F2003CF118D8B9C072FF6FBA670
-:1096C000D9FD26F0DBCA69F465F0B36B6B254B1846
-:1096D0007D75B5DF21386B14F97F9DE1ACC7FD15B1
-:1096E000FD097BE4F25619E3FB974F717A244E9300
-:1096F00044E96A1E975797098B135C6E90D00E99B8
-:10970000EF26640DE52BF3762EC738CDE25DFD37ED
-:10971000809882E76B29FF98974CC8085ACE5FAFB4
-:109720008CD32EDCDCC9FF46C2E522553BD1AE5EB0
-:10973000FCA4F2BB0AB2F9CFA0F754A8F49ADEDC7D
-:10974000BFB52F89DA09A0D70D200380AFAFDCF5B4
-:10975000A51E526DBBC2F32B949E7B6A81FF59B04C
-:109760003C91E43C08FCFDF7496E1F94ED1F303836
-:109770005CAFBCCEF8FD73F128670CC094E9FF1A0A
-:1097800066B278EBA3944D409CCD60607A8DD0E7B3
-:109790006479951C43DB077FBEDA06FEBFF897C7E6
-:1097A0008C057D3FE1E56827C06B53B1331FECFFAB
-:1097B0004DE526CC5B301A589CD7FBCBC16F81DBC3
-:1097C000BF67E39612B03F2D2D877DE01FD9A8F922
-:1097D000339E1BD93882E5B575E44FB694EF81F915
-:1097E000644C61F262539633DF12D62FE1FA593599
-:1097F0008759FBC1DE3F86F3EACF9E40F598AE2F36
-:109800001BFD707713B69F227F0AC60ED7435BA954
-:10981000DC81243C51BFBB51F2E9E87AAA9AF66098
-:10982000BCA2F2615FE24C902F2F6931DE23E61774
-:10983000FF664A09C475845C992959989F91EBD9B0
-:109840003388F86371A1E91C0F6670FD7A66348372
-:10985000EF7CE2C880EF1E309218F04FCF2C6D2CB9
-:1098600042B9B35C6705792EE21B5DEB0191FD44C3
-:10987000D52F9AD9F9572998039D5CA1760761FEE7
-:10988000A28879BFE6644E67395CDFEB499C104FD4
-:10989000AB3ED47B3BF8030CDD58DC95F21BE3A018
-:1098A00002D4778D60C72C3D10E5637E6A2F3FE7B9
-:1098B000EACC87FC8F9AC9690598877096F20D33B8
-:1098C0009C1F0C64209D527E22519996936C9EA001
-:1098D00085737EA9549FA2F5295B53276829BE573B
-:1098E0006707166B687D6D72216BBF3B7011EA1BB9
-:1098F0009247B2F682C06299D6B7274F647530ECB2
-:109900002862FD3A79CA040FEDFF8A95CB694700BA
-:10991000CFFD56BFD15B13EEA7DC06C90B143E5733
-:10992000B8BFF54A16993B19E0DD2780E7CAC47B2A
-:10993000FF87BF27F27DC53AC577243972FF45FC02
-:10994000BBA5FCBCEEC868B2318AC5A53C3114FE8B
-:10995000475B7A635C2D35D9C6FAB7D07E0A43FDE2
-:1099600008388AFEC4B8CB409E029FD5317FA968D3
-:109970002F4966FC9B8EB31EC7E9E964E75027A711
-:10998000E5C3BED1FDD2F2FDD232BB733B9B1FEDCE
-:10999000D79A877CBD3FF8BB8FDEA4EF6785E6AD25
-:1099A000C68FFB387E2CAD67F1C4A0B507E2D1C8E5
-:1099B00068A6E79142E53AB62733BEBF2DD9CAF073
-:1099C000A2633F92241CA79EC3318DC23DF79BAF7B
-:1099D0007B1E9FCF3F7BDD61FBE584FCBEA3CD7783
-:1099E000ED085F8FC8CF16FD5C59A7FA6E10CB93B8
-:1099F000AAB6F5C0EF1E8D22467C4E76747C9795F4
-:109A0000C7F44BD03BC57D0CC433029D04959C6BC1
-:109A100074DCAFD0C8F3053BD637A190AFCFC2D727
-:109A2000673186DDABD0418FA7831953CC9DF1B749
-:109A300003EE1DFDF52DE0FD29E83A527F401F5D44
-:109A4000EDC74FFFD97828E6A98267079C55F31325
-:109A5000F0047AC6EFFA2AF151CC7343C73EAAE864
-:109A60003AEB5B8E57CCBEAB7A90E7FDDA95F85CAB
-:109A7000D594A58178B9F86E2CF8D81342FEB67D3E
-:109A8000C9DC6E4B23695DE4BBBD919C10D14F874F
-:109A9000CFD5765BBB95E539ABFD06ED090E3F9C56
-:109AA000C3F35C63E7CF87AAF40D88BFEC3585BEAE
-:109AB0000BC91365DD90C2F85B673F5010CFCB1622
-:109AC0001A4A5EB33B28BA242F43FE5D185BB22AC4
-:109AD0008BD63F4AAE447E5DD8BDE4CB2CCABFFFD7
-:109AE000985CC5EAF7947C990DF5AD55ECFD91CEE7
-:109AF000D780BF134FD584512921FDE15CB29DE988
-:109B00001FA51A027864905738404E0A7876551689
-:109B10001A34B511CFB576E0018B4F0CE2F2799093
-:109B2000B0CB035A855DDE1EC3CE13B7833CA5EBD5
-:109B30000D26BBAF00FC6BA25BE764D1AE1E8EFEB0
-:109B4000440FFA90E4A4FA06F839EC16320BF2E767
-:109B50005A37B9403F22CB1C462DC293FB9DE8DA11
-:109B60006ED17E0E1C7AE9A1EE6C1817CC6330A77B
-:109B7000FF9A437FFF0AE2A235574C0E50FF06B70B
-:109B80003CB30AF4ABC12DEFFC9DC95B762E43CCF0
-:109B90007B30F80FE9F341CD069CFFE096BB16C180
-:109BA000FB437FD7D203F063F8395F3DB083F68380
-:109BB000BFE9AE388F41BE90BECD798C0E787C4E19
-:109BC00095A75884872905E17113F3A2DA124E6D27
-:109BD00008A09EA63CF742F5728CAF5E27DD1C10F4
-:109BE0002710E7B4D5FECAB3E5747DF4F9F0209DE3
-:109BF0004198BE3CF206B5EBC3F4EC626255D44B1F
-:109C00008D298AF7CB2C598AF631C97729DAC7D939
-:109C1000F315F5F17D062BDE9FE82856D4EF1B34B3
-:109C20004EF17EB9B35C51CFF7352ADEEF7FA259F2
-:109C3000D97EDA8EFBD0FF9CAB14F47887DF5D0F02
-:109C4000E5C0D686D2583BE9E4A72D0C78EBE1F9C4
-:109C5000D09BB5453E12E1BCCA3237FAF73B9D575F
-:109C60002966E7D7DB34ECBC86F0CB0E36B98B61C6
-:109C70009FDE9628D829B047188371B05F65739F1F
-:109C8000C0FCA8EB41827EAC267DE0474341CECFAD
-:109C90009651EF6DE279354DD37331DFFDAC14D8B9
-:109CA00007F179CF6C761E6038D57071DD10D394D2
-:109CB000609FDC8A751793A5AA7D5AA1A897591EA3
-:109CC00054BC3F26799DA27D9CFD31D53E6D51D47B
-:109CD000273A9E51EDD376D53EBDA4681F7E215014
-:109CE0000F6434B2D5239BE9FC879C6D28857D19D0
-:109CF0007ACE331BE8A5D0E7AE07765874B4F608E1
-:109D0000943E6A4F817FEAADBA642C8FD6D9D1BF19
-:109D100074BCAE0F9627EA1CF8FCB77583B07CB70D
-:109D2000CE89E57FD68DC5D25FE7C2B2B1AE11DF75
-:109D3000DF5BD78C2585603AC88BF8B88E7B13D251
-:109D4000C18E6FD304AA2182FAFD670E225F6CEBED
-:109D5000166883FAC3A465C2285A9F0FC614E85731
-:109D600050D2FDF4A43AFF2B05F22952D8739197F3
-:109D7000D0A871E6837EFDF833C7366BD3097964CA
-:109D80009D2BD962657523ADE366431F9E639B9D42
-:109D90006984FC0A44C610AC4F807A7B146BDFF0F8
-:109DA000CCB1091E9C1F8B1F4F09C58F1F4F8910F7
-:109DB0003FFED525BB19FC28A76EF636C3BA4E71F7
-:109DC000BF9193E4EBE6D1B2589BAF03B97856A5A7
-:109DD0004788B24653FC24E069A3C63115F380EFEF
-:109DE000D511C83B9F2C317BB4430F4C65F2A87D45
-:109DF000A201ED9DD31AE722CC6F9282CF03BC5E05
-:109E000049F910E1D76E0E66001C7E997286D51353
-:109E100082CF4B8EB0BA8EADF38594D35DAD7337E0
-:109E2000CCA7D33A53D87D31C4E74C07F92BEAA726
-:109E3000CB9D5520274E173B7BC17C4EB90C483F2C
-:109E40001E97D90BF99544EB2C9A1AE64FE99DAA77
-:109E5000C3EFA6E8199D9107E488E7C4CB52999E09
-:109E600085FB06F6DC8C68D4C34F6B229FF39ECD36
-:109E7000E173B55B64FFCA1CDE5E72BF19FB6B5FEA
-:109E80001D85F1DB76576FD483DA6B2994287DB476
-:109E90005FAABDF63AB61B44680BE39433399FFAC8
-:109EA00055CBAABF9EA1EF7FB23ADA813CDC723774
-:109EB000CAA707F8CBB3E38CA8B7CC9E9C5E02720E
-:109EC00069268F77CD316B1331ECA5B5EAE10AA095
-:109ED00085A6FC0D20FE17C797EBADB45E91B66268
-:109EE0000394CB7A6ED1C391CFCABE7B3680FA5829
-:109EF0004549AB08EDA5C07B75745E73D7C876661F
-:109F00003F897386CBBF517E85C0C3D33C4F86C289
-:109F100017EDC2B9A992C22E999BCAF4866B295C2F
-:109F20006FCB25B9B794719C3F033DB4CE7E2FA76C
-:109F30000B7FBBB29DEB6D1FEAD9B8EA7B26C4B894
-:109F40006E3E8FD37AE294408F7BC08CF89137FDC0
-:109F5000CB878BE8FAF35A2C1A8CC30B3EEE67F7CB
-:109F60007D155D70239F1BD81A78F10C413C6F065C
-:109F70003AB9939CBADFB30EE5C3E0BF50F9037C56
-:109F8000F1A6FB9333D81A1FF1FCA5AFAE82F3C73D
-:109F90005AE46B47EBD660FD789D07CB13751B39F0
-:109FA0007F6CC0F677EBB672FEE8E5FC71373E6F6A
-:109FB000A99B8EE5A13A37964931AEC454A00BA3B4
-:109FC0001BF3318F3D632032C4195A0C88A79402C9
-:109FD0009E7F361EF25F0C163867A7CE8351F3DBE7
-:109FE0008EFD6FEA748F45766A5158DE0BE86799EB
-:109FF0005DE3CF296237033F19B22D6522F08F53FD
-:10A0000076BB19F4D6A1A9A9ACEEB49B75B43E6C8D
-:10A010001BAFBBED6603AD0F4FED3E11F4DE531EDB
-:10A02000BB398AD6476CEBCEDABD0483D4A5DBEC12
-:10A030001381FF1413E928D043A9316B14A4C896E7
-:10A04000598A8F021D8C499E370AE8606F8A1DF17C
-:10A05000619C7DDD51A88FEFB35D0B476B9CA6FC27
-:10A06000F5F05D497CB916BE1B95B6623D7C37BAEA
-:10A07000E7166DF87763FBEE590FF5098EED5AD0B0
-:10A0800007F7A6B0F8A7E847D445BBE0AF224FAB2F
-:10A090005F8B0BF9785EB30BF978873F624AF9233F
-:10A0A000E0A7AB69962C12CC638AD4117C875CB88C
-:10A0B000EA9B945A289F9DBCED1EF33A4A5F3550A7
-:10A0C0001F82F527D645E6BBD35223F0DDDF733A76
-:10A0D00005B909F9CFBFD7B37B387EC3D757D33281
-:10A0E000CF3C0FED19B719E4EBC11426270F73F914
-:10A0F000F8675E7EC59FD7689CF360FF2B5279DCC2
-:10A10000B6335D57C23C28DDAACE0574D1CEE9BA7C
-:10A110003A95CB077EDF411561E787EE94AFB53402
-:10A12000DC7ECB82BC9CC6E39027AACE7F10F98D43
-:10A13000EABC5FCA17F15E17D2ACCC1BEDB03FBAD8
-:10A1400031BE07C715C1E87834B54B7EF6F81DD689
-:10A15000FD78A4752F252C9F59BD0EE24E40DA12D2
-:10A16000F9CD9DD71388BC9E4EEB6850DCBF20FC18
-:10A17000EC540F7A16E65336D74CC07F13CE27CE59
-:10A18000DC864FA8F9CE3F8B9FDD86DF34C23CD5FD
-:10A19000FC469C6F5697429F837351906F07F7B4AC
-:10A1A000809FFEA144F701C0DBF692E0571AB0CFC2
-:10A1B000E20388676956F721782EE959DC5DE4B13E
-:10A1C0005ED2787E0D7AD16FB72D423ED406C28121
-:10A1D000D2E35BB40EFED36116D7519817E9C3F0F2
-:10A1E000A7ABFCCC77B81ED2B9647425F214DBB7E8
-:10A1F000FF3D03FD5877C0F7AEE050260F0B40FE41
-:10A20000FFF541D1A8F2B44AC42715409E7522EA51
-:10A2100011ADE97A2D94FF6C3BB1353D07FB57DB5F
-:10A220008BAD29838C6CDCD163A16CD6BBB7CE031C
-:10A230003B69B001EDA4F7797EDFA4F337E3415E1B
-:10A240004D927D897952673BB3F5E4AC127B5E6732
-:10A250007B93AE6F14ACEF4E76A7CBE8B70118D561
-:10A26000F667E59AAF08E4430F5D7393C07D6377AB
-:10A27000B647890C6CA2E0ACE3089445179C98861D
-:10A2800033E052ED112807FF8599E777CA271A7244
-:10A29000A3F1083B0EDE5779BFC2A07798BDCACBA9
-:10A2A0004EF7B02DF328F3D48A7D45983F210762FD
-:10A2B000A0BC2605D0EF256BD8BD0BE2BE056AC752
-:10A2C000A6764F00BB97E54B8D843C233AB9B21F6D
-:10A2D0007C34E721A4FB28D47F3AECD8D735981FEB
-:10A2E000D0A475C60E073B764D2FC73A5AFF933F51
-:10A2F000E16707685963F98A84DFCF56B9E6BAA2E5
-:10A30000DEBA2E74BF0FE44157FE8F8C72A7929075
-:10A310008DB05F95E42DFDCA3039481AFFDC01F796
-:10A320007E94CF9503E0D0AED24E72D2F7CAB9BDBB
-:10A33000413C8FB03AB7B308F97CA293F65B9EC05C
-:10A34000DF2733587BBA687F80D57B89FEF64FC400
-:10A350007A8AA8F3FEEE12F52DAC9E25BEDFCBEA7D
-:10A36000B962FCF7D97866F67E69F7EF4D02FD43D6
-:10A37000F0F771DD95F7F2507E3FB1FBEDF34994B4
-:10A38000ED5C1E887B78CA7E302EFA3DA0E7460938
-:10A3900073DF2AD7EAD0BF7DD5D698177E1E59E441
-:10A3A0009FB84ACD4ED0F7AAF6F5DE21F37C1CD03B
-:10A3B000377EC4E3CA65B209E311D737333EDF9570
-:10A3C000BEB678CD1B8AFDECD4CEEF49C6401D1D2C
-:10A3D000EFDA134998DF4E7AFA310EBEBCBB24E2A5
-:10A3E000ED789E55E47BC5F7204EB04FE37F13C553
-:10A3F000EEA1BCE047FEBBF837CCDF5BF5CC119497
-:10A4000073F3653BE2F1F12CF70A804F9B99DD373E
-:10A41000B878CD21A4D7B5995C4FB004FB86C3F3BF
-:10A42000C1CEF0FFE11DE0FFC37F27FCD57E667142
-:10A430001E7AD937CC4B6B33B338A883EFD3798DE1
-:10A440007D0087D7D340E7D716F973AC32240DFBD4
-:10A450001359BED1BB4560075DAF35E3FD44B3562C
-:10A460007D9C177E1E45946AFDFF73A0A38410BCDB
-:10A470007675E7FA5E08BE2FDD01BE2FFD3BE19B3E
-:10A48000A40DE81D10373DCBEE0B1BE03FAF0FCF07
-:10A490007339D99DC9DDD866162752E76B9DEC6EDE
-:10A4A0006678C5E3315593DF1D06F118410F23A3EC
-:10A4B0004923F8D7295E3B385E3B00AF05FE86E2B4
-:10A4C00032F4BB08F415C25FC2EC620E277F67BC92
-:10A4D0003D7D07B89EFE77C2B589EABF18C77C3DAF
-:10A4E0000AFD276A38FF8DD3BB80B731EDF6703691
-:10A4F000A6FD6BE06C4CB32BF2D204BCBB924FEACE
-:10A50000FD11F38E40A745DF864E1F4DE77C4A1BA9
-:10A51000C03C51F5BEC7A675DAF7B8B4DBEFBBB2E5
-:10A52000FD5FBCEF6AB8A9CB4A1EDF543FCF4FD3C3
-:10A53000FC4BE1F8FF9BFF7C76ED6145FBDC3527AA
-:10A5400015EDF33C1F28EAC302FE524073E10F1FD2
-:10A55000712988FAE5B7F5AB77E54F9FF4DA120D6C
-:10A56000C4DB06F9993FBF2DDDBD01F0EB7D8DB752
-:10A57000DE4CE13AF05C23BBA7AB2207F38756F130
-:10A58000397E39EC6F9F3C44F1E64B62407FA7EF88
-:10A59000F05D5A7B6E673C28BEA121CEB03CB46210
-:10A5A000A355EB447F0D7146C29BC7D318DE61FEF5
-:10A5B0000FA5F7E946A28BA7743E7DBA84F94ED366
-:10A5C00009CB87A6A5CF4DDB2769890FEE352E373E
-:10A5D000697D068CF329CF2F1BF8BDC7243E4E7131
-:10A5E0008E5976CA98973675108B0F3E606AC47381
-:10A5F000A4334E3C7CED21DA4ED67B8A58BEB5386A
-:10A600007FF607CD3789FB3D9E46989F5DE27164DA
-:10A610004987F761A9BF9BCBD73B495E2743BE4B18
-:10A62000F003827AB7A03BBABE13860276BE027EE2
-:10A6300077A29CE87CBDF17CF3965278BFF2B41D02
-:10A64000E15233685D1EEC63CD28E953435EC8AE2A
-:10A65000A959F317ECA74C7EA51EDEBF7E96B9C2A2
-:10A6600007B6523BC51EEEAF0CCC01BABC93FD231E
-:10A67000E67DAECE87F8F449DD092CDF1FF14E11DF
-:10A68000E819813A7F44BFE4B7F50F08BF80F013A3
-:10A69000083E20EEE17B3D8DF305A3D41DEF4FD3A3
-:10A6A000B252F0CB039DF9EB9B77E0AF6FFE3BF925
-:10A6B000EBD7C5F3CA642617D5F8ADC66B81CF704A
-:10A6C0005F37FCDEC00354DF03B93A9378722B295D
-:10A6D0009F9DBEA4413754FAF678BDCC74218344C3
-:10A6E0003867F2CDF9B91DF74D2E95D13E10F90915
-:10A6F000621FAEA775D233BF4A4BB8EDBE29DBFF50
-:10A70000ED7AFC8539DF4EAE11853E604DEFB4EE3B
-:10A7100084F4DBAF5BD9FE2F5E77D8F99739B22688
-:10A7200074DE03F287218FB1DDCBCE33566435E082
-:10A730003DF164503006F4C6A50765C443A2756AAE
-:10A7400053C2EE976A25BE0F011F970C5B82E7E0AC
-:10A750003ADD0B656AC27371EAFBA144BE7035EF46
-:10A76000477D4F5435CF13AE56E5ED0C49E7E7086A
-:10A770000B4801CBAF50EAA5EAB2AD8E28FC926D32
-:10A7800037EBD00F5092BEF7479EB4D03E8CEDBC55
-:10A790006F13EEB06F13FE9DFBA6C657D9BC13CF47
-:10A7A000437D537C2576E73C98B7E0C3B320878B85
-:10A7B0008E3BEB80C10BF7F98B7BADDB2576FF4C35
-:10A7C000FBA704FD4677BA1779F069379EE71CF8B6
-:10A7D000AE536679042CDF40E829426F19DA1A94E7
-:10A7E000D9FDF5FC1C14CF0BFABAFCCBE1B7A09E47
-:10A7F00023FC6FFF2CBFB590737B8C8C3E847FB0A5
-:10A8000030E0423DAE4DE72B827BE83DFBA322EAE0
-:10A81000013F4967FBD4D5BDAD4931EE9FA4433B11
-:10A82000E7EFE2FED63299DDD37CDD2FA3FF6EF594
-:10A830000F7FF7EB67ED77B6EB6B2CD723DA45A2EA
-:10A84000ACD1B0731205A576CCDB037B09FC77C2D3
-:10A850009FA77EFF5066C9CE74F42F0DC3FB34AFA3
-:10A860006F65F3E96A5F6AD60471FC2EDBF9F8358F
-:10A87000078B2CE1F7607C9E2E097CB65C3486F653
-:10A88000F5EBEEFFF0E074857EF3FFBADD3049A60C
-:10A89000AA23958FB99297E9A784E9A9B3881FCB1A
-:10A8A000392488A59BB07CFAF9C481E542E2C2D282
-:10A8B00095E9FE281DF35B8289980FB9EF1F7D0192
-:10A8C0006FAE8D18DA00B973FF2A3DAD3DDF8EE320
-:10A8D000B7BFFE8F0CC86BB913FDF78B71B6A647D7
-:10A8E0008827FF67B18CF11392BC12E9A19CDF921B
-:10A8F0004046B1B8D88F12B3D83DF51DFC2F69BBC7
-:10A90000E07F106FCDFD54C3F243964A787F6B739E
-:10A910004083A495BB28CB0BF7F13437B1F6DC2A82
-:10A92000AB57A2F5DCC151AC7D85D50BE71E669314
-:10A9300000D2E35C38F520C33918C6DFC43DE554C6
-:10A9400063CF063D6B518B91E5EF93404FE0E37988
-:10A950005DD8376333985DDC2F9BF1ED7E254A3F50
-:10A96000444C06E3035599254B3368B92AC3190BA8
-:10A97000653F9B7FD34F0BD12F8FBFA3F2C5E0075D
-:10A98000317E28BE7B32B3241EDE7B5562F9E69E03
-:10A9900083FCF706483031FCFE505766696A061D95
-:10A9A0003F2B83303AEA02AEF07B73AE08F69CC8C8
-:10A9B00067EC073615FAC7D93D54AF4AAC5EF0BC18
-:10A9C000EDBEF57DD187EF01BDF6C94CF73D387F6F
-:10A9D0003D212698FFCF0DDE1DA87FD666803F72F1
-:10A9E000C9F3060DE8051F51B10AE74AFE5867C4CE
-:10A9F000F2636AE742F9276AE742F929B573A1FCD5
-:10AA00008CDAB9502EBAE12084F28FF7329CA3324F
-:10AA10008A42F136F57C877378768C7F508FE357C6
-:10AA200065BA11BE1DFBBD9F78211EF2AA35986A3A
-:10AA3000BB0DBE75CD673CDCDE8B9C9FD59FEF7B4D
-:10AA40005E9316E5785E73206671D87B9333F4D8F5
-:10AA50009EFBFA053C1FDA66E980AF53A24B9EA429
-:10AA600061F5C9CFF741F856653A97C23E52FAFEF2
-:10AA70000E9479CDBFFB099CE7A1FD631E41BB1479
-:10AA80007C0AF57CD53AD47010EB7AD5EADF04DF86
-:10AA9000BFFA7A36AC84F21BC2E806F0488AB4DE0C
-:10AAA0007508D7FB0CC14238A772DF2D3962DE7002
-:10AAB000556631C25927F04DC089EFD7B7A5EB8E47
-:10AAC0007836C75322EED700DE690739743306F4AF
-:10AAD000BA721EAF6F6EEAF93EACCF734226BDEC80
-:10AAE00088BF0ABA7B8EEF8F28730FEA5DB04FAF35
-:10AAF0001EBCD813EE5BA5FBD213EE5FDD9CD14BE1
-:10AB000091DF943BF8EFDB7E1A8FEFE3EF7CCE20F2
-:10AB1000DBCB209F64A6F1F03158D26CCBA76590B7
-:10AB20004F3237593A0EE53C7BD668C82311F9EE0F
-:10AB30000BFA141F07529AE028477DAC18984B98DF
-:10AB40003C283546F3CB9F85FC8953D4C7247757DF
-:10AB5000BC3FCEDE43D13EBECF3D8A7631EE0447C8
-:10AB60007FC57BFD6CC16CB0BFE83AD87DD7BB64B4
-:10AB7000CCBBCB7DFDF4BDF7D0FAA417A7E2FD7ED8
-:10AB8000AFF2F6497B4BF1F703DB293CF55491BA60
-:10AB900034E8B1A77E0A9DA9F4FBCA832F1C77DA9B
-:10ABA0006FA3DFDF41AF17FC75798BB108F8EBD7E6
-:10ABB000D5F3D5FBB23F839F0BE47A7F57F8D241A0
-:10ABC0000F929DE10BBF674B8D2F9059CAF08F9567
-:10ABD000934EB17360DF948F7D0E7C2CEC1C664726
-:10ABE000A9F2B7F5D33BDE5F05FEF7F76482E7EA2B
-:10ABF000F8F9BCC5F0FF7208CFC9C2ED8FC07D5215
-:10AC0000F4B907F44F3807EAA4FDFF3983EB4D95FB
-:10AC1000871F49290CB593D59F2ADE276BA50D8A7E
-:10AC2000FAFA2C657D73F186F0EFBBE2878BB7CE25
-:10AC3000D3BBF1FCA614F1F75AC57CCADE8AC2FC6C
-:10AC4000BC899077421F55177EA085F8EAC42EE490
-:10AC5000A7E03B3364521BA9FD6606F3DF4F782B58
-:10AC60000AF359BE69BF1F515862BEE06F98FCFCE1
-:10AC700028D6AF0DDF774326EBFF5AD1961F7E050E
-:10AC800071CFFD04F337AF5919DFCF6BFA42A3A19F
-:10AC900065BF6E0C5FF22C010DC893F68A680FE455
-:10ACA000E7D72C35635E67BFECE087C67C42623332
-:10ACB00037FFD848F7ED0F7098314C9EB6838D431F
-:10ACC000EBC9FFF138F2FBF16F45F934DF623DC9A2
-:10ACD000548742795DC2E87B0EE00D972BE03BAFD5
-:10ACE000798474C819E007B07EA84FCAFCF1FB4F05
-:10ACF000D2716B4E32FA864C39B5DD3E33CC6E27BD
-:10AD0000CF31BA34D27FA0CF2D3BDAA0077BEECE75
-:10AD1000F4DD8879335F97AE0B3295F67B043A3ECB
-:10AD2000359EEE4BCD7E76BFC4F5965E78AEB52BE4
-:10AD3000F95DB35583F427EA6D2DF258C057F5F944
-:10AD400070014F62C951DCE3B472F8DF26839C5C6A
-:10AD50007950CB923DBA1A67A386D8C3C679F590CD
-:10AD6000A182FD0E259B7FBB90CF07FF6A2BEECB08
-:10AD7000CA7511E41C95CBBA7890CBE5ECF715CEEB
-:10AD80001C4C2A01F89F9188CF8EE7AE589EF1FDAA
-:10AD9000AC3B786EC2FB4392FB68C3EF371476E49A
-:10ADA000D483537B811EF961D3FC337467C8A2CC72
-:10ADB0001E38DE34E241BDF78CD5950EFE86493C47
-:10ADC000DE7FC61A6C057E7C6678B404F17BDAFF00
-:10ADD0007A12765FDF199D2B9DDD0321F28AEFFE4B
-:10ADE00056F7B695C96B8BC743BC7A16B1801D79EF
-:10ADF0009FCCF45AF226A34BC1EF6A24BF0DE6E9BB
-:10AE0000CA9CFCFD4CFA5DD29A1FA15DD901372D79
-:10AE1000FF9DA6AFA9D776D8AFBB25763F8983E93A
-:10AE2000FBD5C3AEFE6C1A9C73A376B644E733BF62
-:10AE3000F930DEC3A3B6AB3BEC9BFFA57FB4B37D7B
-:10AE4000E4DA925914F27BABEDA40EBD5CE877BB5B
-:10AE5000589EFB91E14FB72DA7F5D5BBA2118E9758
-:10AE60009F3778807F5FDE61407BE7B22D786E157B
-:10AE7000D4F7E63A3C385A0E9EEF12F8BD4463FF11
-:10AE80003DC81DF25B1DDEB7F1C5CF0DF87B1E4B33
-:10AE90005FB86B07D84F5FA4DB5F7E05FC7B2F2775
-:10AEA000E07D0024997D3F91D323D0979DEE87FCD0
-:10AEB0000B33EA0D4B5F4B41FE25F6EFD2CFA3F0EB
-:10AEC0001CFCE513F7C7821FAC55B387FD8EA46C3D
-:10AED000F2001F5EBE230AF53EA277BF06EB2FFDF0
-:10AEE000C5C469FD61FCDF2510584F7BCB6BE87F43
-:10AEF0000CED6F64B97EBDA507E3031D7296E5CD29
-:10AF0000CE0DDDCBBC1FF0A78A887B1059DE6C818B
-:10AF10002CB1DF957C22F239F0DF66F238A9F09788
-:10AF2000C4116332D0A19BB07B1F9FE88DF7EA9ECE
-:10AF3000CFE4E79749909F7714F876AEFA00FA4B82
-:10AF40000C2C5FAF8B7B2D3FCC64E782171BFFA2DD
-:10AF5000F09B54AFB9A1ACF765BFB35C506FEFBFC6
-:10AF60008296AB389CFF91E4FA08D6B7AC71CBBEA1
-:10AF700077112ECF7DEF0F30EE0913FA69C8BB0CA5
-:10AF80007E6AFB65B131C8E30EDB1571F58BCFFC32
-:10AF90001EF3472EBE7E0FFEBED87CD97F11EEC7B2
-:10AFA0006A33FB3F7988967B4F9CC27D51CFB75364
-:10AFB0001C5E627CA512D6D11FF2575CED9948B792
-:10AFC0008CDECF6FCA45F8093F6DFBE5C8F6959852
-:10AFD000A7E85FCC4FF42FDEFBEF4CA6DF5FD3FB7F
-:10AFE000F3402EEF843844983E7F2DC69F073F756F
-:10AFF000BB339DE5735FB3D17A18DEFC5F8A9C0C8E
-:10B00000C3008000000000001F8B0800000000004B
-:10B01000000BAD580D6C14D7119EB77BB777C67770
-:10B02000F6818D7FE21FF6CEC4187CF816FFD5B1ED
-:10B030004D39FC832842CDF193D44A216C9A4028A3
-:10B04000C4F864438B92AAAC7B95F911515C358AA4
-:10B05000A04DAB83081455541817228A30BD04152F
-:10B06000701BD1438914925A68EB36D46D0CE7D229
-:10B07000A42D6A2477E6ED1E77EB9FB4897A966F4C
-:10B080003CEFCD9B37F3CDBC99F7DC01F8A906E87E
-:10B0900070823D37176907532238D401A0C13C4E56
-:10B0A000632ACE3F5770016C35240C21671EC063A4
-:10B0B000607E72736C500FB091FE9671BCE1B7F771
-:10B0C0005916C01330608732809B42EF1E49041826
-:10B0D0001FF8A15D7591509BE7760500D33E1026C1
-:10B0E0002B0126E9B3623A05B001C9D16752A46FBA
-:10B0F0000D603E7EB7404518F5DCF1B834210050B4
-:10B100002A331B972B811292C37925568B74D0A1B9
-:10B1100044D09E3D42C827E3BAE7A4581588A975D4
-:10B120007B04958F8FB3B7B7818FB68B5585DC00C5
-:10B1300089B912B06CA4F3957810F1D03E01E50402
-:10B14000EA49D8A16310F7AD6D15C283DC0FDBA807
-:10B150008EFB0AC0B87DB59538EE07584EE34ED346
-:10B160006E2F8E07ACF2297FACFC0559E0FED5E6C8
-:10B1700008E101FF743C36D07C1D40046222E18A64
-:10B180009F8D4EC4BDC9C41D202802C66597C9EF56
-:10B1900072BA626215DA9DE5D444F4A7E922C605C5
-:10B1A000F9265BEC4DA22C08B017E30BE7EDE30F9B
-:10B1B000EC201C0A2A6DA4A7D10C2F435D9B50AE36
-:10B1C0008F8581F675423FA787589CDBF16598E033
-:10B1D00034081E1B51849FD3360871BA0AC29CAE34
-:10B1E000867E4ED7C000A76B21CE292C8945C04B47
-:10B1F0003B7DC7733B13C9579E152691D67E0DC262
-:10B2000003AEE938EC31719A1D078D513E7E5E1C0C
-:10B2100056815AC0F54DC5A3B882E7F7543C1C943B
-:10B220008F18B70C8816105D0EBA487405252EEAE3
-:10B230005909B28DF8560872BEFD7FC4A141576D01
-:10B24000AA7F063C5A67CE8BEF9A7921128675A9A0
-:10B25000389D9165CE27E305686768E9F43826C70D
-:10B260006B335BFE2E7B008E46DB42B642E46B5AAC
-:10B270007ACA90FF99BCD1E09B5A7EE143FE54F418
-:10B2800031830FB4D4D81580DEDEC7436D8F00A89C
-:10B2900019595510A0C2512E50FEECF618F8ABBD4E
-:10B2A0007B140F9E23B5C4A5907F4E076286F88954
-:10B2B000652234206D93D49765B4B37475BCCF40C8
-:10B2C000B825BF03CFEF78DC0E8770FD7EC990777D
-:10B2D000E03A6775CA2F1CD732901F1CACEC61BED8
-:10B2E000D9F747FDC748BFDAFBB00664C739A67C6B
-:10B2F000D63E3FCE574F923C38CB81E25EE434F4E9
-:10B300008C0F5656525CCE1048349FEBAD21DCFEBC
-:10B31000921F3A43F209B7915F672807E7CF4EDFE4
-:10B320009783A7497EEA78E2433400D7BF25ABE78D
-:10B3300068BE2BF3D372AA4B7797BDD3A77B537903
-:10B34000CA70FF4DE87724085189D79166CF6DAC5C
-:10B35000A3803199C47826B6A21EC4A136A446ECB7
-:10B3600038FCA54D13F558A4486F8CEA5D97A49757
-:10B370002EC3752F6FB8251979566CE499598786B5
-:10B380002E0DBF5064B021483B575D97EEFFE3F7A9
-:10B39000885FD73D9742E2A9F374B407B248C86505
-:10B3A000A91BC973D678DE1113B3885FBC95E496E8
-:10B3B000BF3352467EAD18D1236ED233F45E916115
-:10B3C00087D91782FF645FA42FB48B549C01BACF36
-:10B3D000895107E2D5CDC297DDC4FF9C291ADAFF57
-:10B3E0006727E64736C9075D85E8D776D3AFCEE154
-:10B3F000137D6EA4DB5F7D7A2D54D171B0F3FA2DED
-:10B40000E30F9DFF9DAFDB53F59C7F6320D0CF2ED4
-:10B41000487E6212E541E78055AE0B0EFF8DEA4E85
-:10B42000577A9D47BB2664772EC7DBEC57402D0427
-:10B43000F53D6BAE253F5C64F790147530A43FE991
-:10B44000513CC49BE7072E7E0FD2E5E1D51C1EFBC5
-:10B45000E479FAE601B43D278557E0A42348B8070C
-:10B460004EE607C9BF80045B421CEF28CFE300E62D
-:10B4700006C37C3A3D77C227E03EA7872A14ACA0DA
-:10B4800070615F10FEB830655FB7799EDAC553AD65
-:10B4900012E6C1BD67C0834712BA875F8B3891EF50
-:10B4A0003E082401F7E80BF5DC1B13A2A4A771B832
-:10B4B000A680E27DD63C9F8E0201E4349C32E439C2
-:10B4C0002057A4F824BE0E333E9915F32CF36EE5F5
-:10B4D00021CBFAEC069F75BD168CFBEBA91E1BEB6E
-:10B4E000E7069758E4F767ADBA4679B93CBE6D2DCB
-:10B4F000E192B3BADA325F0F4E7E7FA82B762951E4
-:10B500005C0F1F1BFDBC017F783F80B048FE35E912
-:10B51000003FC278348EDB2C71CFD0311F512EE327
-:10B52000DDB4B8E3AF43B6F2CBBC661E1443717A08
-:10B530001EA470763DC091E7C1300A11CE6E298AF3
-:10B54000578E6938D5C3C26C9AAFBB264294E3DEEE
-:10B55000A3C4707C7EC88A777E8715EF42D58A6F38
-:10B56000D1762BBE25612BBE0BF65AF1F46A56FC40
-:10B57000CA0E345AE41FEE6FB1F08B8EACB1C82FF7
-:10B580008EAEB7F095AF3F61915F3AF00DCB7CE0A6
-:10B59000FC0ECB7C32AFA6C67D59ACDB223735EE34
-:10B5A00035D79EB7E84DC659C39FFF679C774D8935
-:10B5B000F3F3681B9DBBEB596387E9187E35D3A86D
-:10B5C0004BED62733C48F16EB62B14D3DFC939AD35
-:10B5D0006E3AEF661F0A997D08D43E1EF7909927B0
-:10B5E0004A5CB94C75B4FA66A8350BF95A3D7C999A
-:10B5F000CA71FD587F6BB6CCD344F6A03C33717949
-:10B60000B48181CD725E90CF4BE1B641EB15B35161
-:10B61000B8E9D36884974B4A2ADC7FBD39CF1A8CAE
-:10B62000BABE2E9801B6343C969BE3007E6E5FB3A3
-:10B6300031051BCCF700DECB41A27BB9E08C46BCC8
-:10B6400033DD27952322BF27A9FCDE7495A976A2B6
-:10B650001B9DF152EA5FC7F2D4235EACF377054538
-:10B66000E6F72CA647C8A90439C69BCE8D50D04F0B
-:10B67000F777FCF321ACBBC2F590E6E7E67B74B448
-:10B680005F35ED39E1558F919E51E6E9ABC1B5D7F4
-:10B690001B3F2AA5FEE3101109AC8381ACE06B349B
-:10B6A000AFED6F9ECBFB6A3EFA87755417647E7FC1
-:10B6B000D09E67FC3DF011297B24ED9C1EB0F3BEAB
-:10B6C00003E6FB68B38957F27DB4C9DC7F14556C7F
-:10B6D000C73ABDF9FC558ECBCE8271B0E5F07CE364
-:10B6E000F7A4A78B5DD587C8A7608DB27E298D276B
-:10B6F000DF4B45E2E7E98BEDA23F5B9FE1BE98A4FB
-:10B700003B0BC6F87BEEC1FA53461F995DBFC6FBE3
-:10B710006CCA6F43FFE8C14CDE5F460F96B4104D14
-:10B72000E9BFCBF56F0EDFB0E4C996BDEF5BF2EF7A
-:10B7300029ED0F96793D77C25E84FEEB6F14AEFA69
-:10B740003AE277E79CA39EDE8D18B79BDEBA947E23
-:10B75000FDC5456DB4DF7FF7F3AF1CDF917D71B0A0
-:10B760002D4CF9796BDF4DCEEBFB744EA7FA997C2B
-:10B770006726A9F41654D8303E136C8E72DC3B7DDC
-:10B780009F2D3EE35D32B232AF85FAEC48896433D7
-:10B7900068B9C11736380D7ED56AA209BBEB00BD6A
-:10B7A0003347180419E6C32616FAE953E8F70B796C
-:10B7B000EA27947F5D3B26AA6C781EBA02FA930CA6
-:10B7C000E3593C57FD17F9CFF07A57388FDB594EC4
-:10B7D000F78E3141AB62580BAA7D85EB6C1897B19F
-:10B7E00039DA5DEAC44B8EE71ABC649C8F46DF24CD
-:10B7F0003F0FCD1E55F0A19E0F9918E3F9FC4B1693
-:10B800003DC1F34D97D6BBF979EAA07717BD77E92B
-:10B81000BD91C83068868F71FFE64CA10B7D463D17
-:10B820006B3469BB78B89CD1FDE08803E83CE03E0E
-:10B830004181F61972444F209F87B6D33DE5D792D8
-:10B84000719FAFFE95234675639BF3631EA7129FFE
-:10B8500097EBC92DC3CA85EB725F724423649F1EA8
-:10B860002F5D87F6F5DBF1FE42EFE977711ECFDD44
-:10B870009D17171D3F94168F12330EF00C80319FC9
-:10B880007F8CE63B87476F511DB9E255BDE4FFA8A9
-:10B8900020D7531DE9CC7A53A2FA53E393F93AB473
-:10B8A00097FB8FF5E0FB8CE3ECF4FC09F3750B16CA
-:10B8B0009B6C7ABF09EA625ADFE9D425D28719C1A5
-:10B8C000EF7FB3F97F676BFC153FD2BB6EA594F693
-:10B8D00049EE8B76D4909EA4DF493B527A3E3BAF33
-:10B8E000B739272CE7F7F6D1FDE5744E105F95ECDC
-:10B8F000AF16D996F533AC7FDC8CDBBFF3432B7DE1
-:10B900004877847FF0C6DB726A3EC1FABFF501C595
-:10B910006BD8C5EBDC6CEBA7FAD9796998E3817E2B
-:10B920003E49FEA5F9F928ED93F4F3CED07BAFF8AC
-:10B93000E52FEE5FA2242E91DEC4B1FBA532AEEF5F
-:10B94000BC78F526E54FA7F9CE87B3D6F7BB630ED3
-:10B95000BE13E7A5D573AA710BF8344BBF3F3992DC
-:10B96000EB8B6DD6F578511670BFB3E6FBE13C9DCD
-:10B97000DB19DE9967E3026F95670BF07E467D0069
-:10B98000FB2ED5FD64DFDD7D43E0F9B8DB0B7C9E4B
-:10B99000ECA2FC67FA15DE0792FF478830EC6F983F
-:10B9A00007DD92FA6DCA0F507B785F1017B814CA82
-:10B9B000E3C1DFAC31DF4B469FA933FB4A1DE921D0
-:10B9C000FBFDD9BCDFD49AFBD63BF11EE3A392ADBD
-:10B9D00099FF2F31FFAF70F00A7F67FD0774153EA6
-:10B9E000C90014000000000000000000000000007A
-:10B9F0001F8B080000000000000BFB51CFC0F003BC
-:10BA00008AB7C9333098293130242A33309C01E277
-:10BA10002479841CADB02A0765FA5F303230BC024D
-:10BA2000E23740FC8E9174FD3F8510EC87BC0C0C16
-:10BA3000BF80FC8D405A4C8081E12690FD1B88BF61
-:10BA400003F9E27C0C0CCA406C06E4BB00E93C2024
-:10BA5000F607E23F407E1B1F6EF3FF0AE1B7FFAA25
-:10BA6000002A9F571095FF911FBFFE0E41FCF2BCAC
-:10BA700004ECC7864FA8911F1F3CEAB44F33D4C4CF
-:10BA8000371950F9A7651818EECA323028C843F89C
-:10BA9000D790E48D8062676420ECAD620C0C7BE58E
-:10BAA00018182E336037771B507E1F50DE0E6A0E3B
-:10BAB00000B5BC7B1E680300000000000000000011
-:10BAC0001F8B080000000000000BE57D0B7854D5AB
-:10BAD000B5F03E73CE9957662693848484F09824FB
-:10BAE000803C020E010248A893071425C008A868EC
-:10BAF000110651088F3C44ED976BDBCBF04AD1D255
-:10BB000036D6B6D25ED401E15EA45803448D1A60E5
-:10BB1000806051C106EB03ABD600B6080219A0EA5B
-:10BB200048F1F75F6BED7D92732633407BFBDFBFFF
-:10BB3000DFFF8FB5DB7DCEDEFBECBDDE6BEDB577D9
-:10BB40005496CE581FC6BEC1DF8D8C3D2031868FE6
-:10BB5000B4127EFFEB9B0CC6A65AE1BF64C6C6CBEF
-:10BB60000EC6463036C5C142166833A5081E766338
-:10BB7000ECCD4D5248C63ED02E58C8D822C67F5371
-:10BB800015D6245DCFD885D13BEB867918937C3EC2
-:10BB9000565B00A5C7CD666159B4F72BC9C558F2ED
-:10BBA00068136303789F6FE0DF149F9DC6D2EA6934
-:10BBB00013530DF5747F0F43FBEE33730DEFB30298
-:10BBC000830CEFB32B0A0CF55E353718DAF7A92D85
-:10BBD00031D47382371BDAE7AD9966A8F7ABBFD3D0
-:10BBE000D0FEBA75771BDE0F0C2D32BC1FBC65A9C9
-:10BBF000A13EA4E12143FBEB9B5618DE0F0B3F62F5
-:10BC0000783FFCE0CF0CF591ADBF36B41F7574A33F
-:10BC1000E1FD98B6AD86F7633FDD61A88F8BBC6C04
-:10BC2000687F63749FA15ECCDE30B42FB5FEC15037
-:10BC30001FEFFEC0D0FEDB99270CEF6FF27C667819
-:10BC4000AFD1C1A401170DCF277BFF66E8A7303F16
-:10BC5000009B3133ABA1D2CAEAA9B4B3062A1DAC0A
-:10BC600095CAEFF60EDC49F4F964B08E01DDAD0C37
-:10BC700046FE9406E59BA3F39203F9389A8F31A010
-:10BC8000DB297C6836C5EA08CB4067162B0BDA80C7
-:10BC9000145C51A0B734A0BB28A3D21D057A1B0E9B
-:10BCA0007417B552991A4DA5E769513795DDA23D34
-:10BCB000E8797A3493CA8C682E95DDA31E2A33A3C3
-:10BCC00083A8CC8A0EA0B247B480FA6547BD54F66B
-:10BCD0008CDE40CF7B454753D93B5A42CFFB447D56
-:10BCE000547AA2375399139D48656E741AB5CB8B5D
-:10BCF000FAA9EC1BBD939EF78BCEA4B27FF46E2AFB
-:10BD0000AF8B06A81C105D44E5C068059583A24B67
-:10BD1000A9DFE0680D95F9D187E8F990682D954382
-:10BD2000A32BA8BC3E1AA4D21B7D84DA0D8BAEA136
-:10BD3000B220FA337A3E3C5A4FE588E8AFE9F9C8B9
-:10BD4000E83A2A0BA31BA91C150D51393ABA95CA1A
-:10BD500031D12D54DE10DD41FDC6461BA82C8ABE14
-:10BD60004CCFC7459BA8FC16D25B1AD25D984A5FA0
-:10BD7000F4757A5E1C3D486549F42D7A5E1A6DA50E
-:10BD8000B22CFA477A3E3E7A94CA09D1E3547E3BFC
-:10BD9000DA46E5C4E8692A6F8A7E4AE5CDD10BD43C
-:10BDA0006F5234426579F4123D9F1C8D52A9C93BF4
-:10BDB000365A3DD3A6D15F2EFEFF2CF75F06835C7B
-:10BDC0006201D337503207D0C198CEF6B125483B37
-:10BDD00092932AD05512D0770AC8429487536AA406
-:10BDE000D0B773803EBAB5B5605D1D6DF158A07EC9
-:10BDF000178BA848BF1FB13627CAD3BD634EF66C58
-:10BE0000037A7D333DDC0B881B7F246F559C531ECA
-:10BE1000CADB334A1B3C9FD26D5F7AC081FD8137FC
-:10BE20000A90BCE1FB48DF408E38CE5D0A0BBA6059
-:10BE3000AA47708431D42E6C81FAAC72E62B80F65E
-:10BE400075632C3343F09DBA027F851FCA1FE7F844
-:10BE50006762F93A320FCC7FBF288F3013953FEEDF
-:10BE6000EDA672D67DFD383F950110B3AE0E87F476
-:10BE70000CDE8F3922BDFD43AEBD9FC2A0DFC8CE10
-:10BE8000F6CF30FF3BF83C58C206D4383ADBC1F35A
-:10BE9000A3D82ECEF30FE23D6F308120007D154CEC
-:10BEA000358736A37E629EE45B705E564FF2346740
-:10BEB000E2793DBC2C335FE9AB9F6788E6F7B0C4FD
-:10BEC0006636D0F8BECC6943687CC27730D51ADAC2
-:10BED0009C43A830D0CB5F119ED02FDFEE6FA7F52B
-:10BEE000413FBF13E1E3BE26B840BF2F089E0AF4CE
-:10BEF0001B72EDFD1297F54CCCC343E389E7D516D1
-:10BF00001694004E91CDCED0C61C5C9387E4678515
-:10BF10005B08D06E000CD0EB15290842C65A762774
-:10BF2000854DD0BE68B37323DA01ED25C18CA90815
-:10BF3000878D2ADB0C4D56ECFED1BBFF01F5A20D1F
-:10BF40002AB3407DE1C59F1732A0A3EB24897F3F30
-:10BF5000E8DBDB17C60F30EDE79370FC058C8FDF55
-:10BF60002E09B86E4E26BC7D5AB6A96E2C946DBBB8
-:10BF70002ACB19C8F19300D62CA0EF8576A660399C
-:10BF8000AB66BB99E834A87ED2A6E917E267A5B3F1
-:10BF90002E77AD2FC0BAC6FFB0EE8521B5B30EFF28
-:10BFA0002EDE62ACEBE0457650E4BC12DA487495C4
-:10BFB000CDE1A3C1CB97CDE127E055765E099ABAD2
-:10BFC00011BC42280792250FC1A1E2BC1296619CC8
-:10BFD0000A8023B260C5AE8733104E8BB7D8DC9F82
-:10BFE000E8BE5BD99062A8573765B93FD1E9D10B5C
-:10BFF000079F76E1FA97669ADC9F807C3BB3CC97EB
-:10C00000F609A0ECDCB289546AF451D990E37618B1
-:10C01000C631D62FD44B131B487F7A92670C494CFC
-:10C02000674B33CDEE4F80554F6FE1FAF6F432ABEC
-:10C030001BBF736699DBCDBF9B49A506AF25B576BF
-:10C040006AAFCD2FD1B8FFECF931D6C84E58519E0A
-:10C05000C3BBBCC4ED13F293F25733F149B3FA05F5
-:10C06000D28D15FEFDC6447444756DDCEA06396850
-:10C07000B91E9F6F337C0FFA79FEA2D32F89F95630
-:10C08000617FD1D1E5FD3800F1A995F01C801193B5
-:10C0900061BC76C5B106EDA8C9827EAAB11DC88370
-:10C0A0004A6B9B39008FCE36727C24FACEE9655BF1
-:10C0B000B251AE5558EBCD28AC2A1A0696213F9DB9
-:10C0C0006D5C9981FA65B17CE1BBFE38FD7FACF116
-:10C0D0006D488D18F56548CC13C635F0197374ACEE
-:10C0E0001BEA674CF02947D7711F97B8DEA9DA76AB
-:10C0F00064C258987F55D37933CE63B214785C4AC2
-:10C10000EF5CBF84EB8771166D39467CFEA91AEC93
-:10C11000FFBD9C2BC0B3CB3C1D997F49D2CD2F08CE
-:10C120008624F0EBDDA305BF32CFED1F007F9E7AA2
-:10C1300043658FC03CD8656805EF7B8BB7F730BF90
-:10C140000BE17577E362923FA750FEA01E66F5856E
-:10C15000481F67996922AEEF2C7BCB355C07BF7D0A
-:10C160009259C0074C59900716FA14C12D0BF5804F
-:10C17000A5A2AE551E8ACF95A0904BD237244F4230
-:10C1800012E9890AFE3CC8ACCB691D6BB83C0AC2F7
-:10C190003F58BFB7DE289F16AC33D6E7B369190AFC
-:10C1A000C897F93F576144906F7AF907F07B46E2F0
-:10C1B0007A7701ABA973C3FC9F30039E60FE77BB07
-:10C1C00099920DEBAB7CF189C2B9507F4DE27AECCC
-:10C1D000F432987E7F182795AF7F516DC8ECCBEF76
-:10C1E000BABE138DC36F1BCB683C9293C1459AFEB8
-:10C1F000651EA590A42518B989D79FDD28FB6C2E54
-:10C200006C07CF75F279DE1AE3FAAEB6FED8F532D6
-:10C21000F633A2B7455B6E614867DA7A347C69EB26
-:10C2200051B748BE501C3E6813F4AAC9B588809F18
-:10C2300066777C1E53BF1453FF26A6AED1B72AF8EB
-:10C240001BE8FE736924F2736402A79336AED744E9
-:10C250003B7367BB4B576A6711FC02EDBEB9523B9B
-:10C260005BE7788A29BD6BBBCA179F7D2108F4BDA7
-:10C27000E8B95FB818D0E329A53EC30BCF976C5E31
-:10C28000ED42387DAA045D4837A742F2C478F01A1F
-:10C290006392347BC32101DEAB34FA2F5A3E05F59D
-:10C2A000FB179B55F7238097EA2D96B005F05DD5D7
-:10C2B000B8B09C0DA5FA315EFFE179A48FEA26F5AE
-:10C2C000B81EAF8BFEEB17191E27E121DB84363039
-:10C2D0000B673328AB36FD7902DAD1D52C42F41C3A
-:10C2E000DB0FBF8FAE1DC8EBB9E6E4AEEF35BFB1D3
-:10C2F0009A3F62D58D3F3A8F7E6335538EEBE9A826
-:10C30000026919ECBC41266737F417D828360AE5CC
-:10C310008A0607164A27B9BCF299C7871E83799CFB
-:10C32000D9F4864BD2C1072C2482CB8586791FA7EE
-:10C330005D412F9C03FA64FDF5FD42D4CFD3041375
-:10C34000E80ED5665E2E51C3AEB100CF251B542F2B
-:10C3500050265BF2ECD3FFF96BE03BF6BEC5DB0F7A
-:10C36000E0BDF8D903EFDE00F5C5DBD56EE57C193D
-:10C370000E29A3131FD5F02FC66534F82FDA79C024
-:10C38000EC19C29F7F3FB5130F8BB7EF35B3215D1B
-:10C39000E156DAB0D7DCE688838F866313D09E59E6
-:10C3A000F9CC9766C4F7A9DD12EB9ED3B57FC5869D
-:10C3B0000364BF209C087F023F1DF8EA82A7F09427
-:10C3C0009747503B37CAEB447872A2AE1E4974FCC3
-:10C3D000DB97E1FB157FB47871FD15BFBDDF85EB01
-:10C3E00038A9D4707A7E6275860FBE5BA10633DCF5
-:10C3F00054F2E7154F3E4874B6E0C8836497017D58
-:10C400006499486704B3707DF7AEBF95D6379F0532
-:10C4100088DE2A9E90FD2194030A9BB83D0E3F3C86
-:10C4200027F8E1E4469094B0BE93281FD1CE7D4B0F
-:10C4300016F2F13EB2231F146B054B86EA9F5B395F
-:10C440009EEA4C262D2E6735D0E9A61F921C3DDDB5
-:10C45000CBD7DD9D4F70D0E426C953F9C8F8EE1C48
-:10C460003F5CFE523FA0BB527C8EED5B559F6DA89A
-:10C47000A19F9097FCFB0F88EFC3BCED687F9CCC1D
-:10C48000E07A22767D7F3469F211F4AB8EBE747C43
-:10C49000CDF97CD3C39CAF353E0FDD3211DFFFF504
-:10C4A0006DCE3FD80FF50FCC2BDC9DDEEF9D21919B
-:10C4B0001CB0B0703C7EDEA40A7E36BE07094DF685
-:10C4C0001BCC5B9192F57402E3A712FCC92E99FF75
-:10C4D00073E8A7B3A7ABF17BD4CEDCF93CA7936F8D
-:10C4E0001708FEDF8AFC9FD4C9FF6C7DFA35F96717
-:10C4F0004BD4D07FFE1AF915F833E8417E55FDB8CC
-:10C50000EECFB6ED7FF74EA0EBCF1A343E35CACD55
-:10C51000583EADD8F12043FA8CE5D3CF7AD6B0B8E7
-:10C520007C0ACFE3F269CFB6FF11B9A9C1ED480C7F
-:10C53000DC400E3EF5B22731FC62E560B5C9135709
-:10C540000EC2EF6D56D895EE347AD3E86CD16F2ACF
-:10C55000FBA0BCE9A0478DDE3AE851A3B7D8751A15
-:10C56000E116FB7E3DCA1B9D7DA0AE604127E039F0
-:10C57000B24B263FB1DD1371A5C27757DBD81CB48F
-:10C58000B3DBDDA29EC2EB9174731DCA05ED79C4C5
-:10C59000C6E30DEDFE882B45673F1F6B965D1E7849
-:10C5A000DF166213E3D9D52071E9FB6D2CD1FBE5D1
-:10C5B00004BFF1B2A377ED08F4AB642FDA6EF72C69
-:10C5C000BFDD85218BF6E6BCA933E1F9BDAFC91407
-:10C5D000D368B7BB86E2BCC06F57B200BEF3049EFF
-:10C5E0003F65C15F16C1BAE63573BBF89EB54678A4
-:10C5F000CC773C60463903F667271DE8E845DB2722
-:10C60000A8586F7CBF88AD257C2D8AA19F80F077CC
-:10C61000B264413FC3D830E16F9870BCA5424E8DE3
-:10C6200097F3A7CE04B8B71F949905EA179A6556F1
-:10C6300087EBDC268518F271309DE8B00AE403D35D
-:10C64000F9856790CECC89F9F7CCF31F157E0F9A48
-:10C650002C79E183A1FF01E59917DEEFFF0AD65F90
-:10C660007CAFF707AC6BFBD2DD5FCD46F9DEBEDBFE
-:10C67000C2284EB2FB77BDBF87F5972D5E8A73AC9B
-:10C68000B0F0F8D46E67A81FBEEF05F8467DB9EB91
-:10C69000CBA16DA46F56119ECA64EE475C68FEDBA9
-:10C6A0009FA46E58C2AA508FEE4E22FBBAFA655B69
-:10C6B000089DCEF65D5F16061CFFBCF554995980A7
-:10C6C000E8CFC966EE407A4D01C4C1F7AB5F19F3FC
-:10C6D000F472F87E65E35EF33C785FBAE7EBA1287D
-:10C6E00057DA7770FBE09CDAF624F3323655FEC554
-:10C6F0007215F0750E6DB51E2097E4778B838E78DA
-:10C7000070E170680738E0BA002E15280F13C16376
-:10C71000FEBF2C3CCECFC6EF2F691EC5E41C3D5C8E
-:10C72000241F7FEE0C59255A3F7FBEFBCBA12877F3
-:10C730003F6B584EFAFB6AEB5E8DEB4EFF7F69DD77
-:10C7400052F85AD6BDE95F76DD9CFE07C95C1FC56D
-:10C75000F241573A7FF1BB54FFADD34BF3BD46FED8
-:10C760006FF9975DFF3F88F71D12EDC75D0DEF274D
-:10C77000FE65D77D35BCBF26F0EE7463BCB77DD7B0
-:10C78000D7BD996EFD575BB749F957956F575EB79F
-:10C7900066F7B49A6ADC23607EEFB3FA5B73A0FCA1
-:10C7A000BDEF623774478107FCF1FC860285FB0D03
-:10C7B000168C3361C35B252D5ED46AD8C7ED594111
-:10C7C00076C614DF8FC93E604A4D6B31B46F2D9928
-:10C7D000E77D845A141C0D607DC6385137FA536FBB
-:10C7E0004ACC27811D3BA564D241B4EFA6FA64B2BE
-:10C7F000FFA024BBEF9DDE13F8F3D1463FE28E1875
-:10C800003FE0F699C6F7B78AF16E634BDD23005E11
-:10C81000B7F554DC2100D11DC5352AAEE78EBB2407
-:10C8200056AF8B57DE1A339E4B61224EF28FC1EF0B
-:10C830009E0EF82D2578B062D9BB995D03FC188750
-:10C8400077EB8C61218CC330C5CBE1775BA597E298
-:10C85000A0C2CF54457FD5B1A615F9566546FF5203
-:10C86000F31313C19909BF93C6C9ED84BBEA93C9F9
-:10C87000EFD48D47F0D0F0F1F7E241C3DF7F171F0F
-:10C8800085888F38FB670BADD65B71FFC23A4022BB
-:10C89000BF7DEA5A99F260ACF912C1D13F5AA5FDA9
-:10C8A0009D3F9BFC856838970F1F55F5101FD68B51
-:10C8B000F05928E0389FD590DDC92E7FF34D11EE59
-:10C8C0001B1184E0BD8FB1C9E087CC2F92C276588E
-:10C8D000FF028505930B30AE29B1E3FAB866C8585C
-:10C8E000C7DFB7323AC7B95AFB44F2E19F5D7E0C0D
-:10C8F000F2E8785FF057B054E8F38ADE4F9CD3CC6F
-:10C90000E158BD440AE5121D8555BF6E5FE77D41C4
-:10C91000D71F7F7F38C9B9E29F0E4926FFD53788D8
-:10C92000ECFD6A61EF5F087A92315E73A1392F19CD
-:10C93000E331170E96BAF472512B8F083FF20FCBEA
-:10C94000AC54B69749F532FA5B2C3285F470998D68
-:10C95000A1DC89EDF792A2C55D6ACC1497879F5C34
-:10C960008878E4BF05D035395587B7B5934F29434B
-:10C97000BBE2017FC775FB24FF5DF8A2DF8A703D33
-:10C98000626B9BE08FB3DE3704FCCAF77D65C63867
-:10C99000C1B4E61C15E132AD4C36E4DDEC57843F02
-:10C9A000359C0DC77995EFBBC93506F17250F6DAA3
-:10C9B00000BED5CDE7CD8138FB6DB1F0C4F1312E8D
-:10C9C0007C42F5CE47789EF8B18D05811F0E8BFD18
-:10C9D0001F78E543F90543F9303EF6B6C2F7150670
-:10C9E000AA3C2E3EBDBC584D87EFE637BA87A18AD8
-:10C9F000E921DA0F543DF43E5BF4D3DAF558C2DB9B
-:10CA00001D33BBABE2AD7FB299AF7F01F37E77B44C
-:10CA1000F4AF87B7E29F3AC325A8DFCB2492235D0A
-:10CA2000E99A117F5C98288550FFA21F4BF5728907
-:10CA3000F4FF612DFF601AD7971ADDC7C25952392A
-:10CA40009CB5EFE7A89C9ECD2A878F06670DBEB1E7
-:10CA5000F3D5DA83BCBA511F5F99DA34ECB7689F1B
-:10CA600054354B6E0CFD55296D66E4C3EAA6475557
-:10CA7000DC2FB8C3C3C7658A7FA87EBF76A0AAD0C3
-:10CA80007CF6178C25FBF1E25A6E1FFBEE39EF4264
-:10CA90003BE8B0C9FBFBB1C88F6FCA944F90088EBA
-:10CAA0001F2CDB32A34CD18F9B43F39CBEA458C5F3
-:10CAB00070D07796EC55BBEBE869A09A4AEFB5E7E2
-:10CAC0003D96780AF0397C8FE611FC8985611E4716
-:10CAD0007E436B4912BCFF4E4D0AA7C38A86BD66D2
-:10CAE000AAE7507BED7BDA7762F969467992A13E3D
-:10CAF000AFB4AD27C2A5DC127EC01B874E5B546D60
-:10CB00009FE4EFD4133EA0DBA1FF3FE889F3137C41
-:10CB100071E0F698DA453F748FA71F962EF7744799
-:10CB2000F82FDD95D71D9963E96BE333E2E9877749
-:10CB300096F1FDC0F7409E61D93E03F4C3F53AFD7E
-:10CB400030C346F411DBEF07EA35EA070D5FFFC398
-:10CB500072E61DD40F71F8BA5E35EA87DB9AE79268
-:10CB60007EB86D86CC3CBA78DC0F55B1CF95503F7E
-:10CB70001467DC4175D59B14876EDE117E09C215E2
-:10CB80004BFC0EEA893D42EEC7EA8B44F27C9A598F
-:10CB900012FBD55791E7FF97E0ACC9F3A5E0BFA022
-:10CBA0001DD8950E19C9EBA577803C97901EB93C0E
-:10CBB0005F7A97884BC6C8573FCAD7117AF9CAFB24
-:10CBC0005705B83EA86ECA797C16BCBFB35EF55A4D
-:10CBD000A1FD9D9DF2B6502F6FF708790B70EEED19
-:10CBE0008E83DF99B39298C728AFFAA29C3A31ECB2
-:10CBF00077F93B91EE0FCBB48FF867A1C70F0DFB10
-:10CC0000DD088C9F77332B443F7F16F2EBDCB2D0EC
-:10CC10008C32E0E3D27BB83D5CB94D263854357296
-:10CC20003BAFAAAF3DE481FA8482AF683F70F12E3A
-:10CC3000BE1F08802A2FD6E171F1E1B6BA6C7CBF25
-:10CC400041A2FDCCF9DEC514C767EB789CD80AFF7A
-:10CC5000F0BC0E1FC5912B05BC16366FA078F3C231
-:10CC600090310E5DD9F7E653E80F68F277F19698A8
-:10CC7000F7DE8769BFA212E3CD3A3F4416F6C3BD83
-:10CC800072387F27E676FE9EFB55B1F8D7DA75AC91
-:10CC9000BFE2BFB9FE23B0FE11FFFCF55FEBBA5552
-:10CCA000B3E0F7023602F9E3CF261FF17BF07558A7
-:10CCB0003F7CE79E47FB75D7E719A509BE3C6C0A88
-:10CCC000D46561BB2A89DA2D58BFFD4006D467358B
-:10CCD000B06118A65FB0CEA8173BF470A387F4EC40
-:10CCE000AC9AEDD2DDF9086F56837436AFC012C02E
-:10CCF000FDD423B608C92F8DEEC699393D8F15DFB7
-:10CD00003DD12352467E4493E426BE08DBB85F0142
-:10CD1000F0B7417DFF982F270878533CA6BA89E3E6
-:10CD2000A71AF0817C35A159D4B7703BEC3BA06FBA
-:10CD3000683FAC79AF8AFD2AA07D1AC99B41867DE8
-:10CD40002EDC9F2BCED0E16DD7314EB79B252F8B9C
-:10CD500083B701F04F5CBCFD93E85583C738B3B08F
-:10CD6000E705FE8ED85ACB87D33E94E4DD888D9BB1
-:10CD700053681FE593FA3CC2E32441BFB1748DF6BA
-:10CD8000BD47174FBA05270EF2954DB4519E1B7D36
-:10CD90003797DB3F7A7912EB3757B356B263264B9E
-:10CDA000818F145D5EDB6D22FF44DBA7D5B57B5C14
-:10CDB000BD423B96E936A19CBC5FCBB7C4FCE10CFD
-:10CDC000CA5BA2DFFE5E85EFCD82F55E5C237B71E0
-:10CDD000FFE77693E7DD22E4DF4754867479F1902C
-:10CDE000EAE3766712C9DDB9874FA8180A990B30B4
-:10CDF000417CCFFD0197AF27703078F647D05B3E7E
-:10CE0000DCAB670D23317F788677EF780FE0E5D6CE
-:10CE1000114756E33EDCF452F7BBEF227C1F961914
-:10CE2000C2F7F89A52F24FEEBF4F22BA3E0A70C4D0
-:10CE3000FEB7CEC879F75DF8EE5D6BD2695F6D968F
-:10CE4000EFC078A4B379539D0EDC5F9B344066013C
-:10CE50001D1CEF62ADAB515ECFAAB9EF569C6F05BA
-:10CE6000E8018CB356341F19DF1DEBEB25AF07C665
-:10CE7000AF0E06CCDD0185ADEBCE9B31DE311FDA86
-:10CE8000217AAAD7F376D59B24AF0DE9B1F9519257
-:10CE90003BF33749CC8DEDC1DEB3F271435618B781
-:10CEA000753DF487FA02EC8FE36E4AB90DF7D1AA0B
-:10CEB0000FC9BCFFE8E5AFA25C9A0FFDE0356BDD62
-:10CEC000741F8DB770BDC43261BC8AD1393F198DD2
-:10CED000E31D52BDF8FEBDBDBF32E3BC67C3F7B270
-:10CEE00060FC7972DB786CCFBE27B93753BC89E719
-:10CEF000C9B60B3E606F6771FE92445DD8819A3E61
-:10CF0000FC833997E8697EEDF23A5C575B303D0768
-:10CF10005DA0EAA6F366B4EB3E013807C06E3B2184
-:10CF2000F2D8F6074F98DB74722A62CEA3FEF7346C
-:10CF300015137FDFCBFCB4DF1D58CEF5F0B1D5B6AD
-:10CF40009084F687EA263DB97FF575BFC4F59F7BCF
-:10CF500056A5FDD173BDDA281E7B72BDCA8230C7CB
-:10CF600095EB65921B27B7F13890FC844AF5050FC5
-:10CF70009AA9BE7FFDF409280F4F02FC910E4B9F2A
-:10CF8000186FC6FA0290EB9638F263BE67119717D6
-:10CF900031F261C13A23FF7791170F4CE0F23D4621
-:10CFA0001E54F6ACA3385FAC9CA8660E4D3E1460D0
-:10CFB000BD359C45F45B75486568CF5529EED9EBC6
-:10CFC000906E66D970A718F8227C00E5DAC590E467
-:10CFD00009C2FBEFCC796924C2EF2F086FE48BB54F
-:10CFE00069B49F3A3F3497E0AAE5132E5867A467C7
-:10CFF0002D7FE98E80CC7C7A3D5091C47CBA76EF4F
-:10D00000FD00E812BE37A7490AD924AC1F7BF5C141
-:10D01000115477231D56D50A7DBAD64974FBDEBF5D
-:10D020009D5F8D7439FBFB12CD9F050375A857AA30
-:10D03000D6491E8C632EF83EEFBF00FA23BDBCF725
-:10D040002B4E3F40C71EA4F3AAF58FBE4AED3749C9
-:10D050001E1CFFBD0D7349FF56046546EF371D23A7
-:10D06000FB18F400E501ED0FCA1948E755AB2C6E2B
-:10D07000C4A3462F1AFD1D53C53901AB77E874E8E8
-:10D08000B7C1ECA175C7D29D3C3387E8AB7A9B4A08
-:10D09000F4511DE4F474EC5999E870FFEADB897EE1
-:10D0A000CE6D9612D05FA9390BE92FC4DF77D0DFA0
-:10D0B0003392A03F4ED7271FE0F4588AEF91FE9E8F
-:10D0C00017F629630EBDDDA1D19F464F57A3BB2E96
-:10D0D0007A2901BD816D7C1BCEEBFED5369A77692E
-:10D0E000DD4BB7D512DFA8B43F5F5AF76F19C8A759
-:10D0F000F3159E87A1C1B152E1793A5DE6F1F3E5FE
-:10D10000E6AC6B994FCC3CF676EAC502D48B9857C7
-:10D110001286EFFC6EDBD394BF7676EB31CA4B5CA4
-:10D12000FC0AE01DDA9FDBE66461B2A743245F16C8
-:10D1300035CA9417CA9470E174DDF9112DDF62F1DC
-:10D14000734E82EFA21D965039F45FF4C289A1B4E8
-:10D150001FBE22F22AF24F70ABC4E3F2C1B6A1D3D4
-:10D1600031AF52E1791FB17A778C85C76BCEBC9411
-:10D170003413ED1F69CB5EDA4F5AD470BB6AD1C548
-:10D1800027BD1695BE0BED689F260878C77D449C89
-:10D19000DF2D43F4F35BCEC77B86F3CDA22695EC5F
-:10D1A000A2455B36505CAF7ACB79CA7B2D7DEE59B8
-:10D1B00017C2A1BA4936E6436D91C316CAD7928FFA
-:10D1C00059B87C32E4255535F27319550D22EF27F5
-:10D1D000262F66F173BB5E08026816EFFC2F17F26C
-:10D1E000D1E9D6CD2E84278C47F944534727C83739
-:10D1F000BA5A9E51C3C371F38C4EE37F0081CCB603
-:10D2000018F333D9162EA700EB85FE38F14CCD5E0E
-:10D2100059FCECE74F62DEEB991D9F3D89F35EF20E
-:10D22000BF2E3E89791B6CB7CD8DF643F5D6772896
-:10D230007F50EB576B11FECF33FF457997E7DEB791
-:10D2400090FD776ED7C9DE681F9CDBFE5506E6535E
-:10D250003EB06B3CC51F1E78BEB43B8BE3DF6A2536
-:10D26000D265E81AF23E63F1B0BF510E3B609E6793
-:10D270008F5A88BF3BF2C51A2A79FE9D47E4896D13
-:10D280008B9F57ABE53755354E9F3A0EE55B23D75D
-:10D29000E31DF94E57CB0F7B1BF079FD35E06D9BFD
-:10D2A000C8FF8BC1DB59FC0FC0CF2F2CC6FCB0CF01
-:10D2B0001BEF7DEAD7F8AE31FE79328D8FAF062FA6
-:10D2C0002D6F779EC517B220DFECF80DE5E121BE8A
-:10D2D000CA3DA8E73FEF8D71CB4FD508C50323BBEF
-:10D2E0002C6ECCDB5AB4EB3DE28F73CF1FA1BC5840
-:10D2F00026F267CFB18E1FCF77143189EA4D4E9E4B
-:10D300005726E08E79671E173D17F9659C6EB5BCF0
-:10D31000B344F966EF5872C5B90B9E1757E96935E2
-:10D3200023FCF57968D268C4D33143FE9EB6EED8AB
-:10D33000F1DC088751FABCC944F97CC21EEFC01366
-:10D3400097C3E736883CCA8EFC48C67A1660BE0F83
-:10D35000D777D521E93D16871FB5BCC9D6587E0CB5
-:10D360005D5BBEE4D5E7FB8FC163BF85C79F34B863
-:10D370009CB91C5F1E7F26F81BFC92D316DDB99466
-:10D3800039C22FD1F2C8B4F9D63570BD7B660BB760
-:10D390000B63F9B94AC4DB63BFF395F84E55D3DE8E
-:10D3A000A12877CEEC7B49D01BA7E7AA6DC7CC415B
-:10D3B000219F437AF98CE3C59127B2958F077E6C44
-:10D3C000DCF1AAB79D8F3BDE69C5773BCEFF742B9E
-:10D3D000B7334E37C8134371C63F2BF44FC7BA9DBE
-:10D3E00066F2AB64979DE4CF03CED14793BB6169EE
-:10D3F000A6FC8595CB45BEC30FBC9908E795CE9B8F
-:10D4000019CE6735C247E767AAEE00433B47CDF424
-:10D410008F40FF499BAFF6DEDCCDC4427AFC2BC1C6
-:10D420009E18779D92FBA582FAA57599F15C47AB92
-:10D43000E23E9006E3B596495EB467BBD29971FCB3
-:10D440005B7CB2211E86B1675CD705AF89F0E934F9
-:10D4500085DDD084396DAD99E4C8799847C9A09429
-:10D460006EDADF7E64D9965E78CECAC5BC12BE770E
-:10D470007A3BCEB7D078C92C36CF9ABDDDB790892C
-:10D4800023C0F8DEBD17E312F6016C009EDF713396
-:10D49000BB17EF57784C9C7B5CEB0C90BE4DC837AC
-:10D4A0005E7EEE458B13258F560CE762527CC67A62
-:10D4B0005ACC39484D5ED3113A80FF0471EF43CA0C
-:10D4C00078BE7E8C57F5CBE89C6F4A3AF386F1FD27
-:10D4D0006407E5333B1C7C7EDA7C613E240F004C04
-:10D4E0007C3EF96D41B4C3615E317CCCE8DC13CC89
-:10D4F000EF78CCFC0C76DC1D56A11F14A6A01C7185
-:10D50000585B9980F305639E699061DE4172075C08
-:10D51000E13D8C93234DB560DE821BBDE03CFA5E9D
-:10D520004CBF9E6EFD79B1EB85DE28CA64F974AEFE
-:10D53000B0B91BC9ADDCDA127602EA523DA78FBE44
-:10D540006B19D17DDF88C8635965277B4CBB774059
-:10D550005258502DE8A43780C80A3C17AAAC019A4B
-:10D56000817ECD9112D3BD00D4067C05E3DF6BF53F
-:10D570003D68857675B704324DC37039C5AB5A8A9C
-:10D58000E814EF408C309996FB5A0EF62251C3D81E
-:10D590000DF8DED782B45AAFD54120E27D0BF5F607
-:10D5A0008EBACF0A72B23E97D757AEF1AD5A03E3A7
-:10D5B000C94EFF4A2BF2B1D53D88F62FC2D776EE81
-:10D5C0005D9BE7804DE1523B4CE2E6080014F0DF42
-:10D5D0000F7990ECE4563312C96687560F931DED10
-:10D5E0006F3C427E7965C3117A6FC23A947DD2C294
-:10D5F000A5D9B0CE8DD65BCA3207C2788D73334DB4
-:10D6000020A27F63BDA54549D7C3E156031C9415ED
-:10D61000D35B0E8ED3C3617A0BEAEB6B85C36FD6F7
-:10D620004C5FB5A6E7B5AF3BCBE6DF8A7899546C83
-:10D63000223935EAA883FC35F8D9283E25C6D99089
-:10D64000E0DCA3668F6BED343A4A442779CC3D8801
-:10D65000EB1723BDD4637E37C6EF02016FD9F04EBE
-:10D660003A65EEC0703C9F9E65BB3B6CD5C5F52608
-:10D67000152F9573613E943303CFD36B83B6FE4071
-:10D68000A7E93E13E52367D90207705DAE99913093
-:10D69000E6EA8C6281FBA5BC4E7AD7BE53B78BFB02
-:10D6A000A975734DA115240FDA245C7727DEDB62A0
-:10D6B000F01EE1786F3A4678AF6A3EC6F1DEB4BC40
-:10D6C000C42EF637D00FAC67916188CF0FD6549631
-:10D6D0002940D77D922275480F2A5B5C566E23B88D
-:10D6E000BF8FEBE90277313F0DFE89F0567F30F7AF
-:10D6F00047F9E8271D32D17E8606AF8E76369E77B3
-:10D70000B7C71EF80B7EA77A74DBAB28DE771C7CCC
-:10D710008BF6D55D87A6EDC5FEAE1980094FE7777C
-:10D72000EB0FAD2841FAAF8F50580DE44C248876AA
-:10D7300047627870BEE88047E331828F09EBF07C66
-:10D74000AB389752D424F950EFF64902BB04CAAF64
-:10D75000ACDC2F74DA645A8FD3C6F57BFAA17D3224
-:10D76000FA1945AB4CD43E1DCB7CFDFA57897E8A15
-:10D7700021CF4CC3A74647403849B7C09CC72407B0
-:10D78000CCB6917ABA494DCA85F7A35AEEBE1FF5B9
-:10D790009BD6EF27CB98F71EDDF972A09F13067A70
-:10D7A0001BA2DA106E5A7BA44B7F9C7B17A05F37BD
-:10D7B0005B3AFF0EC655B7B72C95E99CE235E2B54A
-:10D7C000D0C26A70FE8549AC6607F42F4C8612EB16
-:10D7D00069A2DE5DD4B345D9473C1FCCEB791F7AF3
-:10D7E0004D9203E3343C6E38D426F67315F720E4EB
-:10D7F000A3A1361E1F2FCAB493FCD7F8550170E2BF
-:10D800007EA322F61D7323B926C4A3C6BF4AC4143F
-:10D8100076821ECC553C26DC7F7E7D19C041492C8A
-:10D820005F6E1EC8CF8FC53E1F6B3319CE83FB3A88
-:10D83000CF778E453C555ADB7E320DDE560DBC4807
-:10D84000FB3F2B92AAC65EE91C78EC3C5EBFFCBB9A
-:10D8500024A4AFE6A825EE799107C4FA0F2E9B49C0
-:10D86000FD1ED6CE8308BBE55B249AA0ECCBE34734
-:10D870008596A0928AFA2F89C73B0A93B87E64DD09
-:10D8800073E89E8C42EC8BC2FABA4194B752981658
-:10D890002AA7FAE03CC6F33E75F98516D6615F11FA
-:10D8A000CA73119F819578AE86C93934FE8DCC68D4
-:10D8B0004F1566D7ECA7F7961CDA8762516EDF68C2
-:10D8C000F6D078B1BF52D8A7BE8CE699CCC72966EE
-:10D8D000C6F3C385D70515BCE782E5E5D0BC4AADE4
-:10D8E00031EF07F3FB45B4758CEF6247D57BF19EB2
-:10D8F000914903E67ACBC4F38BF06F1F0B9B734BFC
-:10D900007EA77CBFC97387B7CC607FD47B910FDFC4
-:10D91000F85A9E136F1FFCB0E0FB83CBFC5EDC6FFC
-:10D920007CCE06F800BFBBC423AD727AAE0EBF58E2
-:10D93000BCC5C2EF5BCDF3C97E8B855BF187DEB2E0
-:10D94000544F5738C5C2653CAB1F40F7D70838C79E
-:10D95000C2E5752BA787D7F32D21F42F5E5700CE94
-:10D9600080AFD73D12F91B85E27E0D20724E2F1A33
-:10D97000FD24E5707A4936C23D16BEB1F0D4E4C04C
-:10D98000AB082FCA2FF1958FCFE85C7F61F79A968D
-:10D99000141DBD68EB2FCC1674BAA73F9F8726379E
-:10D9A000AE137244C80FCD5E1E2FC6037B99ECE107
-:10D9B000D27427C5654B2BF938A5FD1C1B31BF81DF
-:10D9C000856FA47CD942267E516EDF823DCAE9B3C1
-:10D9D00079C229F4AFFB5802AB9C18879052685F5C
-:10D9E00009E07E3C06EEC78D7037DAC9B170780E5B
-:10D9F000FF634C577869F4D6621376750FD613ED32
-:10DA0000DEA12F8D4846F9CD9A53E3FAE9A38EFAA9
-:10DA10003BC611744B7429B140C77337D041D380D2
-:10DA2000D58FA13933D65A2F23FD8D65BE34BCCF97
-:10DA3000049364719EDABC864BFE77509E8D699B81
-:10DA400098A6BFDF44FBBE06E77102CEE358702FF5
-:10DA5000C651C631E5AFFA788336DE9F6C22DE9080
-:10DA6000CDB2713D45B83990DE399EB6BE3E792CB7
-:10DA70004CF7DF48563AA707FF0B9A533BBFA7E581
-:10DA80003F4F724EFBD44672B886F13C9F3021B1B5
-:10DA900048BC2F12F78CB18892E85E29F64D52E708
-:10DAA000FCBEB0490ADD9321E677768B3588F946CE
-:10DAB0000F49814BF89D33D2A1A1C4AF4AB83FDDD5
-:10DAC0003311F3FE62534B15BE8776F3A99D58D7E9
-:10DAD0006299C77923BB2C749F4F42FBD30AAA4B90
-:10DAE00027078AEC5C8E8CC7785F1EC90B05CBDDDF
-:10DAF000E779DE7871538182DF397081E759973099
-:10DB00009F827ED78D51A3BF76553A75C7C66FC425
-:10DB1000BD444AA437C255B3CBF2ED81EE76C0D7EF
-:10DB20002A21DF9ACF4FF020BE360E1879F37468A1
-:10DB3000923B70F834342B4CD65615F5DD5D82AE31
-:10DB400046235D4964F56874E5B1A31DBD2686AE24
-:10DB5000DCA9063F6E160BD381C7A21AF592C11F2E
-:10DB6000147648AC7DDE6997D7C7F5E7580B38A81F
-:10DB7000403FB3057C57A5988328B794FB78BECF68
-:10DB80005D8CF5C63CA0BB6A5483FF393B4521FC44
-:10DB9000CD5E6EA33C4FBC376A2ED403F09CCE35CD
-:10DBA0000CE0F74875E0B356D71FE9C09141743BCC
-:10DBB0005BEC87FF49E27EF8EC944FD2C9690FAA6B
-:10DBC00017F4F419FBFD84E3C6F45B25F178CE2A43
-:10DBD000D597E9D5D91B13EDDC7EBAE02E5B67BA89
-:10DBE000C2FD06016B8F7C45771F505B8A7566BC52
-:10DBF0007B24B4F1347BAF28C0FDF044E3F68D9470
-:10DC0000911D66FA795846FBBA6F84913D5C14F118
-:10DC100099E619EC72EE8F76B1CBF13E03A82F692D
-:10DC2000DCCBEDF286E564DF2F01FB1EE5F906DCB7
-:10DC3000F3ECC1F884F2C95EEFF02B31BFA5A84127
-:10DC4000EAF03B15C07B5E3D6FBFEA9171EAC30A03
-:10DC5000FA85814CD58BE18192D556F073EA7298A2
-:10DC60008D819FB3C25E327E2DFAA5A93E89A55053
-:10DC70007DB523EBDAFDD855F6E2D5E8C726F227C5
-:10DC8000ABED1E825F227F5276FA57D975710090F4
-:10DC90008B71ED8F49CE9235D84E93170F9BC27979
-:10DCA0003FED46F941945F7173EDDD64EF4FAEAD2A
-:10DCB000F0E2956EEDFB2EF7C7FC8A2281EF5FD86C
-:10DCC000B93D599DC4ED48490AFC02F9B375C0D36A
-:10DCD0006B0B803F6635F1BC0DDB75977BD37D40C8
-:10DCE000239FFE79018CFF5144A1F842B393C79B57
-:10DCF0003F6212D9AB45472CFE46C0C365905076B3
-:10DD00009DDF729995519DF5CC309C0FFE88EDCD2D
-:10DD1000FB297C2758C3F3942ED4E42423DE9B559F
-:10DD200063FC77AB9DE7B76D15F4370BEF8D1C8E59
-:10DD3000EDC2D9787FCB2C25AC527E46D4CCEF39BE
-:10DD40008479E07C9A6DC67176DAB9DFB5D3CEED11
-:10DD5000F859E2DEC9665BEC380A1F5FDC33170B4B
-:10DD6000F7347BE98BB89ECBCCD744780279857A9F
-:10DD7000A16844CB51B417AEAE7F7C12EA9FEACBC8
-:10DD800052B80FC6A71B55F2DFCF8873E2671BF7A7
-:10DD900067DC0D65E5F63FB8D0DF7B4DE0E9ACD23E
-:10DDA0004AF7BC2C795EA67B0AE0BB19DFA1FEF323
-:10DDB0000AF9392B7E4E48D3CB055FEFCFF6F3E05F
-:10DDC000209DFBD1ECCE71D66008E7D7BC5C26B9AC
-:10DDD000017ADB70EFCF8DE2DE9F587BF463BB16D8
-:10DDE00067CEA0BC9F07DCFC3B89F8BF289ACA42DB
-:10DDF0003AF950A484659C7F5134838500BE670F37
-:10DE0000E63E568EF4CA546F3F1C56612D640F8B4C
-:10DE1000FD1BF8B5E0FD74BB45654FE3C5E96389BB
-:10DE2000F9DCAB06439B6F8503DDC83EC610686115
-:10DE3000A7DD7763D418578DB5934B9A87AD42937E
-:10DE4000F20C3E40FA8BF07B91BAD8CF910971ED7C
-:10DE500066C61E2538143C9F3709EF7B2978CDE430
-:10DE6000C6EFEE41BEC6787EE345BA8FA48A856FC1
-:10DE7000C3F7558DB23BCCAE14CF5AF5C68D308F5B
-:10DE80003D11C583FCBF27D2621D4A7513C5318A77
-:10DE90000E170D46BE6D8E2814FF2F3ADF92342FD9
-:10DEA000BFD37E69BE6CA2E77B2EEFA3E7DAB8CDC5
-:10DEB00091D4C1A88FB79BB83FDDF2EAA52494A7FF
-:10DEC0007B2E5F48E3F70F2DD7EE058AB59B092E11
-:10DED000A54EB923CEACB7D3995CF436E62B8D4F63
-:10DEE00056994C78E0FE6617FBE343B6CAC9BADA26
-:10DEF000212568D7C871EC914E781BECE7FE49C22A
-:10DF00007EECC50AF03EB7A6CB698BE95C677392DD
-:10DF10007B05C59DB8FDD0DE72FA6793F0F92199B3
-:10DF20009FEBBF2C133FEDDBBDB84F9B430FEF3A88
-:10DF3000C2DF1759E7CFBD02EDBF3860A77839536C
-:10DF4000BC83E3C5453AE3C4E11E7C7F2BD883DF65
-:10DF50003FC3E300DFEA8C0314258DE4F737A15AB1
-:10DF6000EABFFE9819E3287BECFE6F2511DF34240D
-:10DF7000A19CA8B073B9146425D96024B1E70F9AA5
-:10DF80004A904E462CF710BEB7AA604A215F6CE655
-:10DF90007EFB563C070AE32C6CA837E7E8F0BB5041
-:10DFA000EC377DAA067BA7EA9EFF3E89FBA59F1E54
-:10DFB00058F414E523BC6F61FDE2D89FA1242E071D
-:10DFC000779A8393B661BBE3263AE7D1F2EACBAF07
-:10DFD000F600FC2E3CEA1986F27F599287E0D57450
-:10DFE000686B5D0F68D7F4216A4930B937CD954D1C
-:10DFF000F0DD579887C7F3DE36D17C3BE29F6007A0
-:10E00000E27A7F20E6F3CA419361FFEA153BD76BC2
-:10E0100095492ABD9F97C4E3693B0E96A461FEE92A
-:10E020001E7B603EC2B3FA93B63A97A733FEA7D9D8
-:10E030008163DEDE316908FCE798332637A2CFF32F
-:10E04000F64619D7EBF994B114A96B7C0AC6AB411B
-:10E050003C68E3BD72868F07F3D887FC1659CEDC87
-:10E060009497C9FC3FCA87FA2BAD4A2AE62D6D1555
-:10E07000FBAA1A1EB4F568F3F03430DF0607B18648
-:10E080006FC795E2CC223F72B8909B5FDB7DC124C5
-:10E090001E07247BFBD30376B2BB768A7835CB9CF4
-:10E0A000DB07E1A7E169BD2863E793E8FB8F2771F0
-:10E0B000BDA1955B554F90E8E179AE6FB73AC3D6F5
-:10E0C0003C947F2FE551DD130C260DC53CA8A67EA0
-:10E0D0005EDCEFC3FCCF24DD3EEB3841E79E868853
-:10E0E00039478787C4728DC3BD837E9406A2ABA6D1
-:10E0F000A38CF86DD196FB787C11E481B8CF89F6BA
-:10E100008F912FC43E7296C44B17F2C998E60D2B1F
-:10E11000B33D74BE80F66D353878902FA0DC2DF0BD
-:10E120008270C1F72F89756BEF5F14F01B2FE72703
-:10E13000EBF31163CB3DCB3229A6A8D55F12F35F79
-:10E14000C81E253B74E1E57AB24F3D35BC5CF80052
-:10E150002FFBAF9F6BC6F8EFC275F1EFAD1B95C4F7
-:10E16000ED97B3820F98C9DE03F3393AF46312D7FF
-:10E17000AFA71A1FDB9F4DFA24F02AD2C70D4D8F8F
-:10E18000FE12C1A4D1FFA94D2AF5D7E488D6FF0D10
-:10E1900031FEF36F73FE19B3492DC17B8CC6049910
-:10E1A0001BE3E4AF6CDA2CA35C7F05F92387CB0D6E
-:10E1B000D4C79F1E7824E921A483632686F1F89DA5
-:10E1C0006656B15D87DF960D2F1AE4C1A22DCB27CD
-:10E1D000E138A3DA522594FF9A1CD0F0BDD3ECBDF0
-:10E1E00089E4C994187952C6FB47053C1F13F2E431
-:10E1F000B189204FE051CAA61409C7D9698E7FAFF3
-:10E20000D5671ADF097A1CDB29773FE372B7CD9512
-:10E2100007E3544DBE40F1D78EEF08BA7BAC4CA358
-:10E22000BB1C09E108F6BCA92FAE1BE083F40FF676
-:10E23000FC9C69F9C4A50715DAF711FB48226F8227
-:10E24000384CC7BF9A9CFBDA1EF81BF2496159CDC6
-:10E250004AF433D2CA8344D7A7A4409F54D057A7C7
-:10E2600090AFE3C885E3623D5FA8813EEE38EF3BA7
-:10E27000F988F5403EA8600113AE83AD97DCFAF350
-:10E280000F9EF59CDE521C92217F5CAB6BF0BA9125
-:10E2900075DC3398E248273D65C6BCCAFE21AEA7AF
-:10E2A000985442F4C84C37F7407E3BA532A29F53A6
-:10E2B0002017116E0BED463F445B574F07E7AB2F1E
-:10E2C00052F83AFE28F88E7CDC91D48EDB59C526B4
-:10E2D000DA8745FA207A9B924A7E0A38460AF17913
-:10E2E000C73E435896B83C90711E6EF4DF280EB4BA
-:10E2F00081E7856DDB40749332D14DE7191E53BC25
-:10E30000B6145D1CB765F3E3E437223DE11C12D17E
-:10E310006305D2238B438721A043E8973AB186F067
-:10E3200008F81DE5807153CA0232D24D2C7EB5FD2E
-:10E33000430D1E3B63F61BBFE7E07C3951949E04FE
-:10E3400079279D7AC2286F015FDFE6F8EAA46FC4DF
-:10E350009BC66FC31D57A6F39083DF075EF7D13CC2
-:10E36000CAF7D0F699B47D63EDFB77087A49B44FCC
-:10E3700094650BCC7418F6A396D27E97C627DADF85
-:10E38000A558BA99E7BD6DC73708F7167B487F5E79
-:10E39000CFAD301FE2B3C29143DFD3F0EBA935B369
-:10E3A000BEE02F7C9133B7055F7DBB35583E04D668
-:10E3B000B1DD1C9C3199EC6EEF4D38FE4DE526F732
-:10E3C0002312E60BB8258C771089235F1CE2DF61EE
-:10E3D0001EAF61DE4B05DC353C697048A4AF12E12D
-:10E3E0002724E0932EDEC7F275B983F373BEE35A98
-:10E3F000F93A2823DDBB586005DE3FCD8AB81CEA18
-:10E40000E0EB2246FB886BC578DA73AD1E87AFD789
-:10E410003A46EAF87A749B91AFC1C215FA94F82B88
-:10E420007D93CAF368059F7D61E3F3FD9583DB630C
-:10E43000E9A83F007FE941BE9FBA54D0195010E5CA
-:10E44000E5D56FB230C483C6F7AE19AC44C57D596B
-:10E45000D437D86A46E0E838DC8FCD347B707FF85B
-:10E46000941A213C9D0207B59EF0E9A73C935307FF
-:10E470006EE0F2607287FEF1E17E4FF08F3DF97E33
-:10E480008EDC4C74BD743C23FDD1B27914D141456E
-:10E4900079AE8474B6684B8A84EF53CBDC26592757
-:10E4A0001747D59A58DFE144B7CF3974727154B029
-:10E4B0004646B8F4490B64AA29603738E64CD0C701
-:10E4C0007F5E81BA3EFE03F5BABF27FEB37BED5DEA
-:10E4D0007518FF694FF235233EB26CFEDDF8FDC2C0
-:10E4E000EC1A99E9E4C5D5ECA66A113FFA70F5EB90
-:10E4F0009BE7C2BA673D1C598D6FE7607C7500E6EB
-:10E5000005F0F86A75F3118ABB360B7E1E2EF90FE3
-:10E51000E377EFAAB9C918678D5CDB77BB09BE65E5
-:10E520001F32827F377F8D8CF1084D2E7C807F8F4C
-:10E5300081FB8D12EEAB69FC807205ED4F2DBF01A2
-:10E54000E35ECED44EB98CF5649D5E5D5B6E8A7BD6
-:10E550005FED6987C3A0B73439C89AFFF6C243DAC2
-:10E56000BD995C2E9E76E8F4FE63E5C7E93C311365
-:10E57000F7D0DD2F7CC8A756787F7F5DB7CE73ECD0
-:10E58000C32CE620E64F82DBEB71EBF261A5662936
-:10E59000ECC43CCB4BE8B900FE2E99A87CEADFFD29
-:10E5A0001373D08F6F3279C112C03C09A2636F1F01
-:10E5B00046E71E1AC43E6CF17E874F1D81F7E65B6D
-:10E5C00049FEB5EFB50791AFDB9D268A1FB7ECB2C8
-:10E5D000105C2FF6B50BBF3A64F0BFB5FD0D9BA5DF
-:10E5E000EDAD22E8BFD1C6C7DDF8707FBA4F23D1A9
-:10E5F0007E77516D2EC5F3B4F8626EC463E2496153
-:10E600007C7C25C2685DDAFEF73ACCBF189138FFF2
-:10E61000A297D3ACF94B194EA4C3996DAFE2DC625B
-:10E62000FDAF8C43C7F7E23819B53C2CB0EED052A1
-:10E6300009D7B76E567CFF4BA39F7522CEA5CB732F
-:10E64000C873EAF5CADCD4A45C9DDCD4FAFD52E4BC
-:10E65000398C6AB97B27DA77C0D7694E1D5F4F1AAC
-:10E66000B2DA166FBFDD5FFB10C53F13D1BDDFC44B
-:10E67000EF5B8A7D3EDE29EC1825D283ECC03D5F3E
-:10E68000D83D71F21FFCBB4CF47741B4784CD7EF06
-:10E69000FF3BCDFF4667C7BE5E8F6BD9D78B9D779B
-:10E6A000ABCA7AC5D327B17993DAF7E2F4BF4B7FCF
-:10E6B000EF81DFCC02DB1D5DFB69F6AE5FE2F74E5A
-:10E6C000B18F18E9558D4E00EE7720BE861E9E371D
-:10E6D0001C43A9CC5A23A31CB8D8D4928D71AA4448
-:10E6E0007EA1361FF8F58B1767F1E3BD4A71D67727
-:10E6F000BFC0835FE5F6A7547CE03B382FFF79B3BA
-:10E70000A43F8731C72919F8498B83369F7F773813
-:10E71000C947359C1D0F7EB1FB96733068C5F51C4B
-:10E720008783804B5D312BB174A33801DBE841FF57
-:10E730008FCB494F2D23FEBE5EF2D1BA5738B95D5B
-:10E74000B38EB5525EE3C5433C0F79E87D1EFAFBFC
-:10E750005CA00F8248B7A35860A74997D7A5D143BB
-:10E76000DDB3609F18E2559C7F34BFB59788FBF4FA
-:10E77000C47B4274EDBACF0452D5C9FBAC80952955
-:10E78000BAF85A7685DB50EF559369689F190C4BA0
-:10E79000C85799B51EC3F34E39C5D7DB2BC836A071
-:10E7A000DE5FC7DA687DBDC57CAE9702441F170FD8
-:10E7B0009D48C5386448E003D6FB24ADB736705198
-:10E7C0004F1FDA7AAFB6AE0F97C17C80EFFF847E21
-:10E7D0003994773D704CEA4E707753DAEF1CD1AF25
-:10E7E000D7F78F90FFD8ABA695ECF7D9B57B25D49A
-:10E7F0005B2037A8DFBA65562A7FBDCC4D3254C3A3
-:10E800006F4F68877947DA7DF089F4D22EE735EBD0
-:10E81000A55DCE387AC9648DBC86FBDB95CDB20789
-:10E82000E960E5F753297FE2A9067E2E717F33CF99
-:10E83000E77BAA8EE76D6BDF3DF77C32EDEF9C1333
-:10E84000FB7CCC7729631AED7B5FCAC0F3451F3B85
-:10E85000026FE8E5E053CD9FDB505F0CD6F26463B6
-:10E86000F40B0A5E3CAF42671F25B47B86AD917105
-:10E870001DB70586634A1BF0F73B9C3EB91EFACDD7
-:10E88000B61293FE9E8E8B4D7F9DBDCFD3B96FA4E4
-:10E89000ED2B69EFB57D27490A7CAC97EBB1FB4ABC
-:10E8A000B1FB21B2CB4A79D65ED9EE958D7A95E847
-:10E8B0006E653FAE3757EEB513DC56F673D0FE2DBE
-:10E8C000CCF70CCEB705F4169EC3BB78D441EDB49B
-:10E8D000F9C37C871ED2CDB7DA1499BD4F8A3BDFCE
-:10E8E000CFF570EC3A5F633EB2363FD9A9D0BCDBBE
-:10E8F00099DD8B786B30F3FBDB826FDA291EDAEE61
-:10E90000BB64C37B83DBD9251BC6694F3B02920BDB
-:10E91000BE23F78AB8D00FD9DF7C7120D27FA27DC9
-:10E92000BE41CE1215DBC33AAD588E72072E6E6310
-:10E930009CCF0257E837C959E2708DFCBBD69FEED9
-:10E94000BA22BE8CEBAFC6BF83A2B3A324216F63F0
-:10E95000E94D6ADEFB15C6F581BF285F34D89B857B
-:10E9600056029CEA8608BA9BC1C4DF4132D2C3C7B3
-:10E970000E7F3F5CAFC6975780CF409CF75B0EFF82
-:10E98000606C8FF3C0F33C207786B8B89EDA894775
-:10E990009635FBA94F1E97639114467926B1FBB3B8
-:10E9A000939CD34660BFDC011E13DEE3FE77D0FBF1
-:10E9B000B82BC32F4C792ADA79E24ADC27C4737C5E
-:10E9C0008DEA19E3DF4B32C2E1B4C3FF6D1C375847
-:10E9D000D249572B3D5784C72484C35B8EC0142C67
-:10E9E0009D2AD00B0265F45CFAFB555936DF2ADC10
-:10E9F000BFDCBA9CC3A1FD590E87ED2D26A2E30D05
-:10EA00006C10F1DF20D385D9383EC8979938CE886D
-:10EA1000D67A13E6F3F50B794C748F536B83C97474
-:10EA200065BA9D25E8768EC0C3FD8887C1DB785C1A
-:10EA3000E50A743B4FD0EDB5C27D89EB8A7CDB855E
-:10EA4000AE6AF47475ADF9439238071B3B1E636DD3
-:10EA500014BFDFFB9285E477D50E7EEEB76AF749E7
-:10EA60003A2F5AF5B28588B2EC651B3FBFD2C8DF9A
-:10EA70009F2B8EBFBFFC6F2EEE5F5536DCE7D5EBCC
-:10EA80006BCD0EF8A9EF82BBAFDCB94F9736999FDB
-:10EA9000075969D3F241F97E9D4BD0595A2FBF0FC8
-:10EAA000F54EDA781E177239E6D37E5DD7731F9C58
-:10EAB0006FD3453FB7DB43F640EC399074BC179CED
-:10EAC000EFBB12BDC826BB17F72DD326C6B4734CB7
-:10EAD000A4FCB9F498FDBC904BD8C166964972D499
-:10EAE00016FFBC9792ACD97376935E9EA09CA7FB51
-:10EAF0007A9C565AF7D27496568EF101A742E73D9A
-:10EB000063C7D1CA149FC9709E286DA2DD705F468D
-:10EB1000BA3FD550EF3EB387A17D5620D7F03EBB1C
-:10EB20006290E17DAF9A0243BD4FED0D86F639400C
-:10EB300070FA7ADE9A9B0DEDFBD54F33D4AF5B773D
-:10EB4000A7A1FDC0D0DD86F783B72C32BC1FD2B0A1
-:10EB5000D450BFBEE921437B39817DADC159D6EC8C
-:10EB60006BE788009D1F735A25BD1D72D8C5EDF057
-:10EB7000629795E0BF5AE8E3D5E2BCD96AA18F5B02
-:10EB8000D20BAFB8BFF28FFA63675DC6B8578988FA
-:10EB90007B9DDB673621DD57ED07BAA0BFCB15386B
-:10EBA000EBE2F6D794B9B47A7E8EB235413EC79780
-:10EBB0002ECDCF03BF248E7F674AF6C4F5AF40AE9B
-:10EBC0005D72E9FD205623A31CD0E452751223BBCD
-:10EBD000ADDD15ED8F7C04724A4A4E47F9F458CDED
-:10EBE0003E944FCD16924FAF0F38417EF5CDB5F321
-:10EBF000092E875D3C5E2B9BBD1E7ECED4A8770F71
-:10EC0000A9AD94A77D68A4CCF07E948BDE51749E50
-:10EC100039113CDF44BF1964D77E940D23AFEE77E2
-:10EC20001E5A5641F9CC89C63B34CC4671CFF29876
-:10EC30007B7007093A2A4B16F0B470FFF1EC0B4ECB
-:10EC4000CA2F3E5BF00EFDFDA2B38D7F181EA4BF40
-:10EC5000D7D57A3FEEBF07FFEAA0B84CF9B0778668
-:10EC60002F27BBD6C7FD37F177C1C6BD78D8857EC3
-:10EC700077F9F6FDDD823AFCC5FA6D65627D4C6977
-:10EC8000EB4F79A1AF9CA2BF1B53FED2816E3C2EED
-:10EC900064CC5B89F5D7CB6BAB086F5ABD326A3554
-:10ECA000E4AF542AFCDC6F65D441F92BAE64A33F7A
-:10ECB0009F105ED708CFD8E71A3C0F0D3BC5CFAFEA
-:10ECC000DBE2D36F4DB2313E1C7BAE2051FEFAED3C
-:10ECD000A2DF45EF183A075F6E0EF7BD96F8820681
-:10ECE000A7D72F2FA0F30A2F2438AFE04FE671F7F4
-:10ECF0001706DC4B79C763AC35A5A8BFC788F86594
-:10ED00009CBCE37B9247623EF33F27EFB852C38F30
-:10ED1000C8EB1D837C9CCEBAE41D5FED3CC824BCCF
-:10ED20008F3B0E7FDDD401BFF767E0BD4EF73FA1FB
-:10ED3000521ED002984310E3261B548A9F1EBE6CBD
-:10ED40006118CF3EB95E7D1AF3552A9ED8DFF331A4
-:10ED50008C5F0FB3501EDD820DFC3E1036CC16C208
-:10ED60003C8D8A0D0F66607EE467C0B74B605E0B1A
-:10ED70009E48A73C9EC32D8F64209E4E097EAEF810
-:10ED8000FA87B721FCB79BDD838741B9649B64C8D0
-:10ED9000035FB4C966A86B79401AFE98D4991FEE38
-:10EDA0000139FA78B2F17CCBF0CE7D85C793853CF2
-:10EDB0009D0EF3AD1A79D18C78DCFFAA9DE6BDC714
-:10EDC000C1EF570B0FFBF28DEBA15EFAB5A2DDABE5
-:10EDD00063C82B62B80981F79C88FCBFD297948ED8
-:10EDE000FC7CE13738C6EBF2A0C3CB6A886F4A7F60
-:10EDF000C5FDE2521BCFD74D986FC4BAE4330F4024
-:10EE000079DE25CFA8F33C84C12ED1E8A63159E4A0
-:10EE10001B09BEDEFF2ACF2B9A7F48D89357919BC0
-:10EE20006FE2BC15C4D7EBB370DFF1B080C6E1CBA5
-:10EE30002757D13D44A3258CB0B19397E3F38D5967
-:10EE4000939F98BF3FA0133F93BD0B3BEAC89653D7
-:10EE500047DF67385770EDF2E6CAF2A436999FBFD4
-:10EE60008B95EFB174FF7F4ABE970F3BD01BCFC984
-:10EE700043F99F745E7E3B978FB17C1E2BCF6F8AC8
-:10EE800091839D72DC6490E337097DDE29CFCD2428
-:10EE9000CFC13CE3F7B7142AA19512F93D5FA0BE9C
-:10EEA000CE7778D28AA1CB2A776E52E0CA7EE82547
-:10EEB000E493765BE06B2CFBFC6610FD5DCFC1DB61
-:10EEC000EA4DC8BFED09EC8FFF0D39A0FC7700803B
-:10EED000000000001F8B080000000000000BCD7D2B
-:10EEE000097C94D5B5F8FDE69B2DC94C3299EC2BE5
-:10EEF00013761570801010A27E4900A3101C5001DB
-:10EF000035E82490842D24205AFA6A5F262460C4B0
-:10EF10006843B58A8A7650F051450D8235B651273F
-:10EF20008014AC4BACB6A5AD621044362582FAA76E
-:10EF30007D2AEF9C73EFCDCC3799B0F4F97EBF7F7B
-:10EF4000FAB397FBDDFDECE7DC6566451B181BC3D8
-:10EF5000D8B32636BBD506A902E930C6CEE2DFD546
-:10EF60008CC5380A66452731B6DF0A29D463CCEA56
-:10EF7000383494B15C6660712A63258A37C601E52E
-:10EF8000D5D6AE07CAA074C96FBE354311DB10EDEC
-:10EF90004D352632E64B37BB37E504FB93699203C8
-:10EFA0002A41BBFE2B0AD9C104C62C56E68B1AC5D2
-:10EFB0009862643ED3281CC7B5D200ED8D4D8CAD50
-:10EFC00081F6B17646F36443530D2C99B13BAC8C7A
-:10EFD000FE7C850C27C37C3BA2FD0D0A63DF332D2D
-:10EFE00003E7F303D3321D50FF23A665615E8EDB7A
-:10EFF00028D6693430EF565BEF79CD74287C1CE657
-:10F0000019EC81312B0A9937141E322D7018A95E24
-:10F01000C1C337677741F9671DB76433E86FD7AF6E
-:10F02000C6C67545A82FD3B575B5EE89D0F4FE3A9E
-:10F030002FA5F18C69389F5FD4CDA7BC13F25BA1DB
-:10F040007D85D933383EA49F818E788297A3E04F87
-:10F050009E01009743CDAA437141CA0CC5D8FEA0BA
-:10F060003FAE78BB6897A86BC7E7A9328DB101B0F6
-:10F070006E9BF15F5D02766719AE9751BF7DAD73F0
-:10F08000A683D38799B9ADD8DEBCE33A2BE25755B6
-:10F090003407E6253D5C0123203DDC839FAE606C98
-:10F0A000B4E2F538A89D9620CBCFE6E0F8C594975A
-:10F0B000E3B34C58715ADFF0628A7613E2EF08D35B
-:10F0C00066627FAD66769903D6DB1ACDE6479A6F06
-:10F0D000A9C05FBA43D00BB3390E5F26C683F99D32
-:10F0E0008CD16EC77ED2A23C65D86F5E46AD6A8277
-:10F0F00026B3A21DA2BEA67886537925D663A99A07
-:10F100005202F0CEFB04E810B2DBF6142A2E183FB0
-:10F11000B173A2E282F11305FE7ACD5FC0ED25C680
-:10F120008A23CD7356349FE75201FFFD560FF1D766
-:10F13000EA1C6F6A2DF4E76A659A1FDAB5E2944219
-:10F14000E0F396C34CF5374477F954A4FB5B987B06
-:10F1500013D0414ABE4F31429A31B5A50030CE1A84
-:10F160001C4EEADF59EC4D55A05E7AAAD9AD2A179C
-:10F17000CE6FC35A35D50BE3E77A0D348F759DBE3C
-:10F18000A8C130AFE44E6F8119D2A2F864EA3F857E
-:10F19000D5D6233EA03D43BE1CEDE0FFCCF516AA1C
-:10F1A000AE10B8E4CDAB6D30C3F7EFA3BD6B43F940
-:10F1B0003163B18FC639AA78FB39819E8EBE193D65
-:10F1C000DB8FFD059C4447B2DE5388D724A487C259
-:10F1D00074960AFD6F34D1BC7237FEEA36E4FFDC68
-:10F1E0008DD718951039F38AC344F58FBEB9B01F77
-:10F1F000AEDFF7370B1B14410EBD28E8E5618187B0
-:10F200006DE6C874F59C1C5FD0FB04A648F9F79C1A
-:10F21000907FB103607D4BAA4F91FC6B76B8A8FE3E
-:10F22000E3C6D6DDE900D7C7E731B70F3E2DDCBC1A
-:10F2300041C1F56E33B75EBB05E7B5C4C0107FBBF7
-:10F2400076FF6E773AE4E7CF738DB4B842DABFFD4C
-:10F25000EC6AFCFEF87C3612E19AE65FAB18003EE1
-:10F26000DF46B5D0BABFDD6461F530B5C7373E9231
-:10F270006CC77A5E8303EBF5E22340B32115D3809C
-:10F28000C9308EE311E595C49F843BAE1FE5E2AE25
-:10F290004DAFD0BCE57C8050CC08F7A27817C16B8D
-:10F2A000E1E6ADD722F1A72F762A6A4E705EE7938A
-:10F2B000FB1F0ABEB8503A7C339EF331C8790DC7A4
-:10F2C000F3E51949CE7F62F3FE1DE13ECCE64A2804
-:10F2D0008029353AFAC77861FC7E03D8ED9E08FC98
-:10F2E00078A9BD703FD63F19E53D807CDDEFB94B75
-:10F2F00027B258C62EDBD262407C9C54B85EE8CD63
-:10F30000A7423F0ABD28F5A42C3F29E8E20EA12719
-:10F3100023E8C79391F4A38BB9EE1B06F8626F1B29
-:10F32000887FC3C75D2AE87282E62D427E9E1DE378
-:10F330003D83F3BE629C7FA70AF5C716FB7622BF0A
-:10F34000E72AB53BED0017762D9703095DAC0396D0
-:10F35000C5E2F77569B1909F8B7200C61F7F44EBC1
-:10F36000C0F1E23C4CC1F6CF229DC33A5A9CECF668
-:10F37000E911E8FD36B12EC343DD66D46789ED0A95
-:10F38000F15B6FF8707904F232261EE697D70FE42E
-:10F39000694E6F791A017FCE786877C996C00EAC36
-:10F3A000352A7E600C343B17FE92E3097F5A0A8EA1
-:10F3B00023F175E959F576CFB0DEF8CA8EE7F3BFD1
-:10F3C000D3AE6561BBCF843EE80B8FC3E339FE8AC1
-:10F3D000E2B99DF3AC5DD48BD2D72B8BE778A988AB
-:10F3E000D7CB83107C0F8F8F806F29C7B7ED7949FA
-:10F3F00045BCE54D6C69403C005E47E37AC6E7D703
-:10F4000036E0F784A95C1E86E355CAC370FC86E328
-:10F4100095B17A9A1FE0E3AAF808FA4BF613AEC743
-:10F4200042E404AD6B9DA04F1FD227E3FA68832D01
-:10F43000B80EC93FB709784CF07A8BCC9C4E4B7014
-:10F44000DC2B66FB779A904EE7FB769A43E97401D2
-:10F45000A3FEE43C32BA7CB49EB47DDE024CC71FEE
-:10F4600009740C837A29B5B01E165C4F56E7870ADB
-:10F47000CAABACDA4E85A1FCDCB383E69DD9B98B6F
-:10F48000A7A88787F5D6B78CAD1474C8FB79339ECF
-:10F49000CBD5D55FCC4D45BA595DC0F5ED2ABB56ED
-:10F4A0008EF3BEC3A1CD45FCADB36BF3303F2B9AB9
-:10F4B000EB85E1F15A257ECFEA43DF2F117000B8CA
-:10F4C0005763BBC4E5CCA7C03AC6EEB3F9415500BB
-:10F4D000E9C3BC614189B53EC50C704DD4981BE5AC
-:10F4E00074BF046FBD09EA755FC1DC4F413EAED405
-:10F4F0005180F072CE7777203C577FA1927DBB7A06
-:10F5000029F3AFA47E18FF3F6F7F3FCA57E4DF5057
-:10F510007EF18979F8E2391F80BDF3F378CE9F75CB
-:10F52000C49FC2DE917CD997FD12C2D7AB2F92AF98
-:10F53000EFBF48BE5E2BF8FA97949E87AF1F0DF27F
-:10F54000F53A9CD7F9F87AB3E0E737057FF7C5D7E6
-:10F550007F10707B27BE4F3F67338ED75B8E73BAA9
-:10F56000937CF1D29E5131E5D0EF4E31CF10F9DDD1
-:10F570008AEB3B9FFCFE37F8FCF7D8EFF9EC54D947
-:10F58000AFC4F7F9F864B8D343F092F668ACDD4144
-:10F59000EB917C0FFCB247F0CB5EC12F6F613A2B31
-:10F5A0009ADB07E1FCD5A3EF3AB93C014F2606E907
-:10F5B000478E7FA437BCFE12095E594CC0AB98CB76
-:10F5C000914CE65363B1DFA90ECA3B4E38EAD155E0
-:10F5D0008C3DD4ED43B87D1BCFFDCC5C857922D921
-:10F5E00075C7049F247616927C01781EC27125BDD2
-:10F5F0002732C714F473A29C5C6E8C1EA7ED44B92D
-:10F60000E4D03C2ADA1BB94ECE0F124ED0FE8B4806
-:10F61000F8D88EF818D6DB6F08C7C3A762BE514E64
-:10F620000E8FF0FEA5FCC1FE8753FF2E03F62FDBE5
-:10F63000FF109443DF237EC62EAF55715D894C8B3E
-:10F6400041F923E524CB84F6B9BDDB9BC4B8D0DEF9
-:10F65000E484746C2DB41F166C9FC5020AC2C339B2
-:10F660001FE41443FBDD4DF66C9BD5637312BD3074
-:10F670002EAF0A0C240FA6D934E2A748FADF7991FD
-:10F68000FADF29F4BFF342F4BF33A8FFB19D723E05
-:10F69000FD2FEA8F709E5B4EB87BF022E304BDF530
-:10F6A000BF3382FEDF6FD5A8DF087C3412D713E3A7
-:10F6B000D046610A7C34DA9914D43BD06E0C7E6F4C
-:10F6C00013ED9BA71A86927DCDA2DD91FC9942A7EE
-:10F6D0004D37AF2B859FC2DAFFFBB7FF91C7580D9F
-:10F6E00016F179163A43FC9607A77E9AEC253F8ED1
-:10F6F000E9E22BBF5EE97E6F088EF7AECA90BF7E4F
-:10F70000FD9F5D6684776B74EC0816171CB7E65F87
-:10F71000405860CF9FFC97815289C725EDCA680683
-:10F720000C59B0F33B8A939CECF817C5492EB5975A
-:10F73000CFC075ED7A8DC74B4EBF7DD0897424C77D
-:10F740005F26FCC849EAB0D600D0D3A9CD6637FA07
-:10F75000212A733D920FF3A9D963627E9283CC8AEA
-:10F76000F54D7CBACCB47975A71A8B79A34FC439FF
-:10F7700094B3A4EF5C714897A63D2AF9152C919794
-:10F78000D7326BFDD9FE2057C719982B242E12AF04
-:10F79000453357489C22A1D8A9CB338CA7C0B88B3E
-:10F7A000189F6792275DD73E65767F5DFD34EFA594
-:10F7B000BAF28CF9A374F9ACDAF1BAFAFDC03F0AD7
-:10F7C000CDE7F8AED3D51FD03443971FD4728BAE9C
-:10F7D000FEE7ACF6E17C5CB74FEB1C08F39C27E638
-:10F7E00039645DB9AEDDA586D63CE068362FB070D1
-:10F7F0002A1B01FCE85FA8EBE7F8B3C57B14F8CE41
-:10F800005A4C8738BC6A19C28BD60FF0AC6C53D8EF
-:10F8100063D0BE6A1D2F97EDE6B7AF5D9D01E9028B
-:10F82000BFFE3B637E33CAFD459BF5DF1F74DA13D1
-:10F83000294E93CED2CFAA91E8C046E39D5AAFFAA3
-:10F840002D803FD537248C0EF4F860FF4BBA700939
-:10F85000BAB0A4EAE922CAA5A78BAABDDBF202AC22
-:10F86000379C63863A23C251C2D9EED6D38B842FFC
-:10F87000E8C9FF13F8BE81F08D09C2372DCABB035A
-:10F88000F9EF74DB7295E1785EEF686CD797FC9DB9
-:10F89000622FDC8DF2E274DBD7B7ED80F5D5C47052
-:10F8A000FE3FB9E3BBC128DF64BDEB5694BB278E96
-:10F8B00006E02ADEF7B07FF9BD73E8D3CDA3603D43
-:10F8C000A56D2AF1F149A3AD49B99C96E97200DC16
-:10F8D000941EBC713C4ABC29ED3BFFA900DE2C30D4
-:10F8E0004313C61BC7B9AD384F8CF421BD286087C0
-:10F8F0009E8D217DF231CECF57A8318AF7FC89B990
-:10F900001BA056833DEFB2F3C4050E38495F7A1B46
-:10F9100051BE8EEDF49EDE82DD1B3B1D18FF9DE285
-:10F92000F5D27A2EC70982FDC41C00277BB03DB4F6
-:10F930003B8EE34E2970C6A0BDB575D732F2DF58B5
-:10F940007B22D9834832A1764EB89F25ED46B0D3AD
-:10F950004FF17978BE7686DAE9C26E93F6765FFD6E
-:10F96000807E1D8AF6415FA9B2431D6A04B8742BDC
-:10F97000D1EEA722E80D4B82DE9FBD3218DFB22404
-:10F9800084E88925779EDE8DFA03E01D9D00F3B49F
-:10F99000DB417F2B17A4BF63B1FE2331B144D7DD18
-:10F9A0007B55FF106870CAEA8A7302BCF2519F5CF3
-:10F9B0004E712096E10CB6ABB5A60F33823EC93F1F
-:10F9C00035348E9D23AE9E8FF54607F3ED514C677F
-:10F9D00017AC1EC5E7E512EB3C10C5EDACB1225FDC
-:10F9E00013168FAA69E2F1D70D6660B5907EC62620
-:10F9F000D879BCC75A3016D7B341C4A157E7286499
-:10FA000027AC5614B21B76DA0AA9FC90B3200FE19A
-:10FA100077B918672C8C81FAB9A5BF988FB0C764E5
-:10FA2000FFDDA27EB7B390D2B1090E8117C7A588BA
-:10FA3000FF0AAB46FD9A5535229CF313B8FD5313CC
-:10FA4000CDA49F46FC3449F0D76421478BEC204776
-:10FA5000B91F387512945F25F94FCDFFD00CA43B28
-:10FA600029CEC4305E7C959057EC8CF15394270ED0
-:10FA7000F81FCA276DA863178CC40A98E9D35039B8
-:10FA800053C83AD3913E8AACFAEF93B64F3E8AF20E
-:10FA90006F123306BFE77078C738837C7063428F7C
-:10FAA0001EC84439D516DDF5CB29E81FBFA3BA9F80
-:10FAB00062BDD75B91C0EDB066B4A36D042A0DE3BF
-:10FAC00097D9621FA5777D0E9F0D7DC4792BAC055C
-:10FAD0007311BEAADD538129B0C3A5C8EF6D666F4F
-:10FAE00003FA1DDD2F339AC7503FDB81F9E13E1742
-:10FAF0002E17F0EF8B1981743DD2407EBC6B5DCB2D
-:10FB0000CE282877AD579C0AE44D46E6B38F0ACA43
-:10FB100093C6841C9A6C7357F90E3B9427AD9FAE25
-:10FB2000F487F9B4B096A258B4B7D6B38871C13A85
-:10FB30004147530A76507C3DA91BE834021DD42569
-:10FB400018A41DFF9FB88EB1DDDED14AFFA03C2274
-:10FB5000518B7ED32E833F529C769AADA811DB0D3C
-:10FB6000F7B38871BF9A683E8F26AB670DD2E9F074
-:10FB7000ED01F287AAA45C9F676046A0AB1B841CC2
-:10FB8000BF617DC73FC98EF8EEEC5955DAA18CFAFA
-:10FB9000672897AA6EB4FB317E5FD59EE3A379797F
-:10FBA00014F720486ADADFF760BE2A37D78171661A
-:10FBB000EDEF4C393C944C58C6E59F911D967A96D2
-:10FBC000EC06748A189B21E8B906FDD124D21FCD1A
-:10FBD0003100FFAAF5F53BD2A0BF3F3F0D7D40D1DC
-:10FBE0003ED5BBEF67D0EF4DA0C4568CC2D4C84AF7
-:10FBF000290E9D4AFDDC28FAF1FD0BC6B506C7BDEE
-:10FC0000A97D2FAD679F89F9AC40BFA6423EB4E9FC
-:10FC10003FE2FC0D2808999FE86CA6B56512EAD76B
-:10FC200093E6EE116EB47F5FFB6B960FE0FFF1CFB2
-:10FC30004FDBD12EFEC4D86DC7EF47EEFEC0AE013C
-:10FC4000FC3EBE5B2D4678DF26F48D847787C07B33
-:10FC500042A2A70DF1727BDDF779DE10BCB3154926
-:10FC6000C43F0BFC30C310BB63D1E618B4847AF2F6
-:10FC7000D5AD09BABCD41FD516561B290EF48DE09C
-:10FC800097055B3698335C38BEF72D1CFF8891D3FF
-:10FC9000CF91ED76BF2F27389FF22D23CD68977C2B
-:10FCA000D26E6101D483C64E13B37139A3003D787F
-:10FCB00005DEC3E7B9FBF518EAAFE2575C2E95C144
-:10FCC000582B00AEDEF605247FC2D751F1B16B721E
-:10FCD0000AC0BBE25E85E1BE0AD6BF1BF0E65D71DD
-:10FCE000CF5768E785AFB3CCA79747739BF47929C3
-:10FCF00027AB04BEE7317713DACF152DFA7A55ED2D
-:10FD0000F751FF556172EC7882B0AFF2D8D8B3608A
-:10FD1000A734D8FAC779CFA1AF4ED4815C1FCCD815
-:10FD2000B13A2BA547EA18A56D092E82F7E2F6F73E
-:10FD3000EF42BA59D2B6D58CFD34FA2739C64315ED
-:10FD40004BFBCD0CBF5B705F159ACEC17D559827DC
-:10FD5000DA3A88FFD18AE77BE44793236C9F55AC5E
-:10FD6000AF54C09FD9B85D518AEB1981DF8D5F8791
-:10FD7000AEE7D49ED1561CD79C28E4F15858977A08
-:10FD8000E1EB92EB91EB93E5D52AD05984F692BE44
-:10FD9000DB04BDCDDB387D753A80A2E1B5CFB3BBC6
-:10FDA000B85F4AF6BC51E0C7685B43F6BC9181BDC1
-:10FDB000CED729EC79F621F2ADA4B3703AAA423835
-:10FDC000500087B7B30A3BBF877EDAEF2778483CFD
-:10FDD000037FA48A7DB354DC37033A3A144647BA0A
-:10FDE0007C458B3EFFA5A92B1BF91BE8E550287C21
-:10FDF000BF0C3B6721D3A4C4FE0487792E6DB203E8
-:10FE0000CA2B986735DF5F6D21B81C31B6ECFE193F
-:10FE1000F2DD464EF79F08BCFF32D1332111F59534
-:10FE2000511B81F2BD70659A9A08F5CA9A1507F2BE
-:10FE3000D3DCC69193910F47318DFA9B9310D94E25
-:10FE40009B93C8E15F5E6B6266B0EFCB610C946B15
-:10FE5000E5DB55E273A0235B09E061BEC043F5BD5D
-:10FE60005BCD6990CEAFADE276829FF30BC095EC8F
-:10FE70008485CD1D66A457F04722F29BD403D5ADEF
-:10FE8000FAF21AD64C78A8413E93740CE3CF4E1484
-:10FE90007CE6666EA447EF5D76AB1277FEF5B2DEC8
-:10FEA00071058A3B9CDA3388ECCA532E570AD6F385
-:10FEB00002CE3BD15E367AC7E2778013E9A3EEFA31
-:10FEC000183FDACD07CE803F88369CC33B16EDA4A1
-:10FED000AEBF67B1354A903EE57A6AACCD449F35F6
-:10FEE0004CEF6F96816383FB9B659B12FC3E85FA0A
-:10FEF0001FD18676C52613D90D3EB62C95019D7966
-:10FF00005699481E96B7C593BF5BDEC8F701CAB7BE
-:10FF1000C4FB55EED77F38302F8887038D45E634F4
-:10FF2000C2538E9BE2C36D261D7D4BFC84FB8B0B65
-:10FF30009B3A76A7BA7AFB8B11F073A80FFC1C0AC8
-:10FF4000C54F73187ED8DD095CCE2C7D739015E605
-:10FF500077AA36CAAD46B037A41E6299408079C1EF
-:10FF6000F853713AC70733BA93119FA79BC710BEC6
-:10FF7000C2F154FCC35CC207FBBB9DA13D3307FC2F
-:10FF80009019F0FD7685F3C79C866B8B515F6F4AA5
-:10FF9000E472E63D904F9A99B1F7413E69209F3E49
-:10FFA00000B985F93FD7A552FEAF752E4AFF5637E7
-:10FFB00094D24362BF54F20D108019EDC2E704BF22
-:10FFC0003C9728E381CB53D17428FEE1833106347A
-:10FFD000DD7D33AF9B94C5D8F59A5EDFCDBE51AFC2
-:10FFE000CFBA4C8EC9A9E8B7DEAB90DD57EE99A029
-:10FFF000ABCF8C2EF3740C6C0F1D1DFC4EF69CCBFE
-:020000021000EC
-:100000003C03F8FDE6A909BAFA339B3274F99D89DD
-:100010002E5AF7F4E201BAEFB7945EA6CB979D0192
-:10002000208C466A76121E965B9930169D3C2EE80F
-:10003000E075BFAE1D9BF21398EFD76F9BA83C1CD9
-:100040001F12AFF3D6199817A636771DAC0DFA3DDF
-:10005000D402788276C7F7D9C9BF58BD65F4BBE32F
-:10006000207F608B89E202071A131E40FBE8C096CE
-:10007000A45806A977B52AEC08879985C8ABA2C60B
-:10008000FADB502E95F92D6EB21776F99E947917FA
-:10009000FAA33849E4970F553FC6B7007F3C2EF0CE
-:1000A000AC85ECDD2360B7E1D6F8118535628A8A2C
-:1000B000250ECABFE94CF2233F17FFA06AA9484F9B
-:1000C000CF46517D8A5040F9B1F7073DB586E8CB60
-:1000D000D51A20BEB5903F30B78BAF8F29A3321011
-:1000E000FF47E299160F93A85EF6D7FD46C0D3826C
-:1000F000C19D2302D0AE342790340BDA9DD868A27C
-:10010000F320D8AF03F2D5CF59367039A2A54C1FD2
-:100110001E0A4FFF085CF71C83E7FF2502FE8E5581
-:10012000FA47903CBB3B89F82A1CEE87CC5E82AF35
-:100130000FF94009CAC7209FF17D1E106A69286720
-:10014000E69ADCC9A89F0E359BC8EE04FD113B9DC5
-:10015000E22B2F111D1F32BA26E3BA0F35E530947A
-:100160005772DCF26695FC02A43FAABF56F5828D59
-:10017000C0A49EF235295E96D29B6EEE583A3605A3
-:10018000D7136EDFCAF44BE0556F88BDB0F035D59C
-:1001900043E78172BB8C370E0F5D4723E7B754DE10
-:1001A000FF7221D717F7FFC37E9B01E5FA80388CD9
-:1001B000931FFD50253A3BDABF252F1548FF846178
-:1001C00047DE4F207FBCC477D808F9272DDE814950
-:1001D000B0A44586E66CF48F4EB61F7C6002B43B3B
-:1001E000F6BCC98DC32E7C76413F8AE708FBBAB7BF
-:1001F000DC0AA473FB404B53009E8B5CADA4B75D3F
-:100200005B14C6D7EFE7E705841E773CA4A02DC595
-:100210000E8EB1AFC178C75C608F50BBFBA089DB8D
-:100220000579495C9E48FDBE5CE4E71A385DB3D7AA
-:1002300015FF2661EF84EA0129972725F5A7FA3DE6
-:100240007A99B592BCAAC4731DB0BEC59B2D7E7FA2
-:100250000EB571209F2FE0E861F5492E7EBEC7FCE8
-:10026000FCC3C84355AC93E67DCCE4AFECCCC1F6FF
-:100270001B1A9DD4DEE4A6B8ABD027566020944765
-:100280005582EFAA5B147F80F886EBC50AD13F4305
-:100290003D1322BF7AEB15BD3EA9107AB48285C505
-:1002A0006D5BF4FACD1363A7752D8471515F06E77A
-:1002B00005F631C0ACD2EBDF3D8DE6ADB8FD11E601
-:1002C00051C5BA03789EAE7A8BE20EB0DEF30A5FB8
-:1002D000C785CEB3D23D7D627C6EC8B861F396F01F
-:1002E000A6C06F081E24DC2B7D1C9E95ED0AE1EB59
-:1002F000336197C11FC59B25DEAB98671A9E37A84F
-:100300007A08E4654E900E7AF4FE56BF19EDDEE3EE
-:10031000AC25D60674BF78DDD6995760BBF5EF9350
-:100320007F51EA0C0C32C4837FE7EB58539CD5DB3A
-:100330004E08B70F7E2CF8E0EC8D79A21DC0A362A9
-:10034000A3AA458DD0D5A3F6D23E98EFF399319E5E
-:10035000395FC409CF37CF1AAC37EA42E61BD99EC2
-:10036000F9DFCEFB8524E13FF5B2870645F4A37A99
-:10037000ECA0F3E8DF8F4C812CD4BFDD5946D23F8F
-:100380005F1BDD7F2D48447D3C88FC82BEE46BA56D
-:10039000D0C315A897213DBC6E5B2CFAED9F3DB4F0
-:1003A0008DF6FFCCCF57C4A25D7C78DDDC077CC026
-:1003B0005287B7CC253D5CF598D4C35E73A87E2FD9
-:1003C0005A57F6EB9F237D6E8E725BA0B8729757DB
-:1003D000D8DD20EF500EAEE3F28E3DC4E56115EAA4
-:1003E000AB61A4AF8660BDBB2ABD4390CE43BE9334
-:1003F0001EBB6BAE772CB5678E00FA5D203903A863
-:10040000AFA43E957AD668F07E9484FCA3BEFDE747
-:100410009FC2FABF784925F7AE5ADD90EDC0FD8244
-:100420003EE4F6BF0F6F430FBC732E00DEE5086F8E
-:10043000B27F38BC3F6DE2703ED8CCE1BE7ACB8053
-:1004400058F46F3F6D1A4076CFA75B0611BCE7AD3D
-:10045000017893DDEBD2DB3D4D006FB4F311DE305C
-:100460006EF92E9780B79BC3BB49E89D669ECEEB85
-:1004700005571F9D1BBDEB698B1BF5F991A8401219
-:10048000FA2347B6AA0CF7E57BEC2261BF48387F18
-:10049000C35A9E443BAA973DB3D6C21CD0DF829775
-:1004A000ED7E06F9634A410A22E044CB1F6271BC2B
-:1004B000E0F83D768C23794C881D7381F859C23C55
-:1004C000747E7D49FB1FF6A11DAF68DCAF5F62B58E
-:1004D00005906FC1DF39112ACF1517CA348C93B834
-:1004E000AD56A4834CE6D2EF1B7919EE1B7D3BE899
-:1004F000ABDB96113F770F0EDDD7A9890E9830BE82
-:10050000D4BD55217C572F2F882D60B82F554BF324
-:10051000189ECCF5B1A2691437B400DD44C378EE5F
-:100520006417FFEE72F038E27A18D71E9C6FF8F766
-:1005300069487AA8CF6D06D2E7E1EBBF2D99FB2B76
-:10054000D5AA81FC8EC566EE7FC8F30F578AF22BC1
-:100550009379BCB72899EF179C8C62A4374EAE8D67
-:10056000F1D7D3FA26523CB3277E22E1E6307ED97A
-:1005700023AF90AF44FC603FB68179CEB388782E2C
-:10058000A8586C7FAB687F6BCB3BB42F079ECB1317
-:10059000A877E7ACB0B8D17EF5BD6621BABB279A83
-:1005A000EFA3B0C43823F2D12D42CEDEDA729F071A
-:1005B000CF3DCC6989D13085717C4CC44F73711F9C
-:1005C00036DD4CF1D3526BD7F3E866DF9E7AF04EFE
-:1005D0002B2CADDEC0ED967A27A3F3239783D98E1B
-:1005E000F15828DA7E36E15CF4A38F0F2FC638ED80
-:1005F00078C6096B1CC155975F6CE6E5CB93474DF8
-:10060000792893B13F31D770C4F762840DD2435932
-:100610001CC501AEC778B1135323D1D90C23F319EC
-:1006200078DA84A135193F9E26D67DD33816888383
-:10063000F506F6EAE3D7B30286C010C0C3F5C6409C
-:1006400007D2B5C1EA32A13FE0295646A19FBC7846
-:10065000E585CDF79EE42B69BE8B0D063ECF9F2A24
-:10066000FEA7004EB70293237DDE6664BBD4511C07
-:100670007F487F354E978FEA2DE5F42DE3E6124F44
-:1006800023A1FB50F8DE2AE607FD34C5627B73E444
-:10069000F8D183C9D20FE6F6E622C1AF8B24BD6D37
-:1006A000D1F3E936E4173C9F83762DC0ED5691F6E1
-:1006B00045EFAD82DE5B05BD3F29F2173A5EB58599
-:1006C0000568DDAF59088F72DCEB45FA4232B79B03
-:1006D000E53C243D3311873280E4403A3AD4D2409D
-:1006E00076D3FCB038300B8D57A991F23DF2C7702C
-:1006F000165373F73C9C8F7255941BE9FA5673EBB3
-:10070000A05A5BEF7A721FB794759AF8BD1B11CF90
-:1007100012FA6A926AA37341A54AB41BEDDF9305EE
-:10072000769F210EE32D26426D29D003CAE78FA2C2
-:10073000F8BEFD9CB8BBA6A15D581A6B36627A3B29
-:10074000EBB4E7E404ED92D5052AEEC1C1C0D55360
-:1007500034C837A03CE1F9FBB44C8A0E89FCB23FA7
-:1007600062F98DDF01FE297FC7140DE4C5C9374545
-:10077000395B4EED4FAE1274EC5B3105F7394EFE2E
-:100780004A96FF9C97DF2BCBEB79F9FDB27F915F07
-:100790001B565E1F56FE28CF773D5C3FC587701203
-:1007A000FB31A5E31592272E4167A52B0304DF52E9
-:1007B000C30E9E16B28021F7FCF56C291E5732ED50
-:1007C0000B1EB2A3DE4E48D35CC950CF96E43D8EDB
-:1007D000DF174E577C6694931FFA070BB91EF15C26
-:1007E000AD4BD06D542AEF4FC21BFAF91AFBBBD8A0
-:1007F0007ED6E1BC9274FD7CFFEFF4332FB5573FFA
-:10080000E6947FA39FBD61EB92765159BA9683FD22
-:10081000B14389BAF3658BFED31D877615C3F365A3
-:1008200000FA452B5BB34743FF8B5E7835BB32C480
-:10083000EF5E72C6C034B09F6ACE304A8F77FCCD6F
-:10084000EC82F92CD9DE619E0CF56A202D0A99D72D
-:1008500062794E9275196784E8F5C12906219FD601
-:10086000D27C17BD70D488F85C64683DFC18C67BE8
-:10087000C62B11F75D6345BBFD7DDCE71A96C2E52B
-:100880009E2753BB2C05CF45A0CC407DDC10799F23
-:10089000FE4ED15F6934976F73F3EC5617C079CC75
-:1008A000877C9FB9727DCE288CE35E9E543806FB10
-:1008B000EB3B2EDACDE3A2ED3C2E5AEAEC5C0EC205
-:1008C0009BD5A66CB8CF7A2563531E917C062C0B62
-:1008D0006D8B2D32DF3665623EC5B9287FC3235B41
-:1008E000EF43BED913CDCF4DCC193B3C1AE542574F
-:1008F0004E8CC101F2625C62592DE26FCED82B277B
-:10090000E3F7028B7D70198FAB135D8C4BF44CC1F8
-:1009100072AC8F710DAF99C7B9BC6FA914E7F28E95
-:1009200088F146DA47BE56C0A136859F73DD03685D
-:1009300046BB43CE438E0F86CAF24EE8EFD0CAB410
-:10094000916B5CB8DF515043F424C6FF65A2B73405
-:10095000747C58EE08FC7EA1F3B83985D36F0DE2A4
-:100960000DF198AF322DC45F9C31314697BF716A4B
-:1009700002D342E3AD3766E8F2B34B07E8EADF3271
-:10098000EF325D7989A533B7F622ECDF1ABB3D1A49
-:10099000EDB08FDBBFF9CBAD68D76D54DD0AAC6726
-:1009A000C16B9BFE32016A9DC2E397FCFE14C5BD7C
-:1009B0008EE17936E43DA3660CDDAFF98275D2B9DC
-:1009C000C090FD00DDBECB22C72E3AAFFA63EDD753
-:1009D0003C9022FCDF516C14EABF53B57FA638DB94
-:1009E000121B5FCF17AF1E30E339063C177016E8B5
-:1009F000FB1A6CA8229FFB280E5DD476C08CFE915A
-:100A00003B85CBE525994B8D6091B11A48516F4CD0
-:100A100006F91407F4D1D9C1866FC7731339763A32
-:100A2000075E7D66060869A423DFB0A5506F5153A9
-:100A300031E5979C89A67EDF533B27D379E4571491
-:100A4000DA2F28C998B312ED51AC7F078C57F2E228
-:100A500035C5089F25DBF9BDA712F54FB9D8CFE200
-:100A600096626A5FA2B23D0AD807538AB89E2D41AA
-:100A7000DD0E7935CFBE06F5AB6A0E0C7E1CE5891E
-:100A8000D94EF224EECC2D347ECD192BB5FFAD908E
-:100A900017A62E3EAF49673CF45DE2BD3D85EF03EE
-:100AA000CABC2969A311EF1598BA18D5BFEECCA519
-:100AB00094CA75BE35F4E9449463A6A4AF276700D1
-:100AC0007DBC95A838C8DC0893B7A76BC7C6B1082A
-:100AD000F2A8679C33FCFCAEE50C3FCFDB9EA6FD85
-:100AE00009F96ADADD5D46DCBF6136AB03E1356DDD
-:100AF000DC485765081FA93B6E36235E4C0FBD6F5F
-:100B0000467D6C81B428A4BC5A9E3B0F93C7FB045E
-:100B1000DFC97B0752BF30DF6CB2476F13FEB7E40B
-:100B20009337457DD9BE13691CF1F8B285FCA73F08
-:100B3000A7798FA3BCEC2C60B35F22F9D8998DFB09
-:100B4000263FD6FC01CF5685ECFB2E3ACF3E6D9C5E
-:100B5000CB80FB01DD3DEBE0FC7ABE757C2CEABF6F
-:100B6000A7B215D8EF7B575FDDA9417F1D3F1B3D25
-:100B70001AE5BE1C5749E5F77098A3FB3BF4E76AFA
-:100B80005E8F71215F97A073941BB463E13BC3F840
-:100B90005FCDEB96A71428AF89057F16C62F7A2361
-:100BA0002A8074DCF1469411F5437DA657491D83D4
-:100BB000DF874C44FF4D6BB71819D9379A01BFF73F
-:100BC00035DFF3C9A7703A937CE96DE2FC5226E861
-:100BD000B45CF09F57F0D1E9DA14E2C3D377C3A431
-:100BE000719FF36E65F876B4075C76F72057902F07
-:100BF0004BD0EF81EF2597C593FF17C277C4878B42
-:100C0000CF38A8BFEA332EC1E74ECA4B7E2B17FC64
-:100C1000621176C43C41DF49E9DE91A930FF9206BA
-:100C2000E07718C7BB322D17F928482F6607D21571
-:100C3000D04B6A6508DF3474DCCCD0FEB0247A88EF
-:100C40005EE6411A6A7F54F4D81F8EC9C930EF6935
-:100C50008D39BA7B1679A91747F70352C5BEBC2D4B
-:100C60003008ED55536D941BEF839D4AE4FB33CB65
-:100C7000EEE5F05B66F214A1FDB0EC51C50D9821D4
-:100C8000BB02E551DEBE5A7368BCF1E63323980B14
-:100C9000E070C39981945E9EE49D88F82F3B3353A6
-:100CA000C06BC4BFB50F3846E3F12593DFE2DE80A9
-:100CB000FB6C515E15F17B248B391E0C892F613C36
-:100CC0000CE362727F50C69B2CB89F1AA227BF31DB
-:100CD000B664A3BFD32BEE54A0DF475BDCF1A73C87
-:100CE00003941FCBD128FE34C7E0BD0DF1BA708646
-:100CF000FF0513E417DDBF2D16E3DD129EADC6C060
-:100D000020D493AD00478C83B536ABC57E6ECFC47F
-:100D1000F0FD2F4ED7928EC3E97BE199FE444FA799
-:100D20006B2DA4774E03BDB210BD23F58D94EF5209
-:100D3000EF487AAE3672B9556D8BA37315417D338A
-:100D4000DD83715C36949F7F0BEA9BA71E188FF49E
-:100D50007F3291CE3587D3FF2B75A974CE46EA91A9
-:100D6000707D23E5B994EF525FDD95E65D8B702AC7
-:100D70007CEEBFB7FD1D3E5D67E47AEB3AA39DE8CC
-:100D8000E7C2E5E60121370FE8E4E6923EE4FEC360
-:100D90001749FF8DA23ED8AF6417A25C0FEDEFCFCD
-:100DA0006985BF41FA7D2195EBD51F6BDE7DC9FBBF
-:100DB0001752A51F7161F2FE7151FF7CF2BE43C84C
-:100DC000FB70F9CEA03F94EF275FBB84F6A7F73303
-:100DD000D007A8F7DA635C9B84FC27FD101DE73F72
-:100DE00097FCF764CEEDE843FEEFF8DFC87F498F4C
-:100DF000925F247F487E08E71FC90F53EE03FF0F61
-:100E0000F1F41EBF5F546DF46DA1FD4357CC48E46F
-:100E1000CB1EBB6DBB427CD64B2F08BE09F2895E50
-:100E20004F48BE907C22F9A35AF04345183FEC543A
-:100E30005B1F1C0FED6E4EF39E0EE58BC52F85EBF1
-:100E4000853EE90A2386AC22B196215D55431A4AB4
-:100E500057963EF8E14C0F3D5D183F1CBE407A8A24
-:100E6000493353BDFF437A8A494B8A484FB6B41F72
-:100E7000D19E385DFBD75C17CCE7742EC8D99C2077
-:100E8000BD4DF923E3F6C2006EF7EF89E6EBDC63B4
-:100E9000CEA278CE94B3FC5CABA44B8967690754AF
-:100EA00088784271BAC78DF395FEC285E2D992D88F
-:100EB00069463FA402D250FDDF97BD3B26EDE2F02C
-:100EC0003C20EDC2ECC4C902CF3FA29D383D125E6A
-:100ED00099C3A98B4380FEBB81ECB780918EC8F487
-:100EE000E957ACE37096F95501A3D4B709A86F810F
-:100EF0005E66E078FF2EBD941431110F7C79AA96BE
-:100F00000F78FF85C8B357A7227E668E93E5BF6D25
-:100F1000D606A2DC61328E4E7191F75491F7BDF284
-:100F2000F644A83FE541168CB343F9A4FCB89E38BB
-:100F30008AC282F5973EBAFDED66C2333FF7C2BC66
-:100F40005D46BECF24F2B990B787E4C785E5D7F3F5
-:100F5000FAB1C62EC6CF29FA39BFAAB8F5C6E9C775
-:100F600013628F002627E3798269DB1507C6416E7D
-:100F7000C93F49FBB1C1F5BF41EB5FD2AE88FCCEA2
-:100F8000B771BDB76CE7F9471EFD43B36FA0E82FFB
-:100F900099E264F4676A55343CFFB0789CE2EF9FB5
-:100FA000D31BCE8FA4E9FD1BFC33EADB333C7F77F8
-:100FB00031ED11CFD4BE3FB50F582E62FC59F991D7
-:100FC000EF3DFC97AC27E209D43FC0F286D6C8EFCC
-:100FD00097BC28F8B113F74D085E1F3523FC3ACDB6
-:100FE000129EFF68C67837DD9F81FCAB8FFE63AA37
-:100FF0006F189FBE16B6FE73CDFFF108EB77E9DBE5
-:1010000007CE05BF0DBDDA0BFA99AFA7A738A367C6
-:10101000D769E8270EFC7FB48B9778A29AD1FE0F90
-:10102000D2C761A28F4E19CFEF45FF9F4F9D682316
-:10103000FB47D43FDA8C7ACC63E8A9CFF941D217C9
-:101040005E05C2B3738CB7FFE0D123CD081FC00F7C
-:101050009553DE780E7E680DCBE787F18FA07FE297
-:101060005F94F3009F4111E4CC29019F2FC4B9EA9A
-:10107000CE426E2776F6E7A9339DDB85FF12F83660
-:10108000A4F3FA9DD1217008C133FC05D00F095992
-:1010900037C1E9E644B9EEA892A9B0AE4E272FB702
-:1010A000A59BEEF7E507F3E1FDC5A64795205C8219
-:1010B000FD5BDE41B974B3809B33DDFA8E8FCB4389
-:1010C00005F9B29A0804E862BBE253D14F40BA88EE
-:1010D000B0EEBFF7A62B5F587BCD748EF65DBDDBFF
-:1010E0006B61ED9929F762DA0BBC4D0DC36B71187A
-:1010F0005E2786E54B65DEAF937F522E96B7AD5DDA
-:10110000959C88714985EE8A06E939A504E97991AB
-:1011100043D26F2AC13548CF69EF20FDCE6895F2E2
-:1011200030FD7E0DF0361DE5E1F860FE0694179463
-:10113000CF28D1E242F5452695CF6A92F5B3EE2746
-:1011400079DA28FBCBA6BCC423F3F52B21BCE60A35
-:101150007DE173BD83E50BDB79FB498FE5BC734E05
-:101160007E680983CBFAB0BC2FACFE43E7D12F8D4C
-:1011700061EDEF0E2B6F0ECBAF0BCB37E9DB97CDCD
-:1011800053880FCB801E1011E7E3CB9BD27BECD4AE
-:101190001E7DAAD8C86ED3F1D594069EBFFDB111AD
-:1011A000254DB6907CBABB24942FE4BD604B22231E
-:1011B000BE30F5212F4BD2F5FE59CF7A8686EB5BF8
-:1011C0005EFE09FE338DF6777476C14E559FEF5063
-:1011D000E5BCAF7A67B92D641F945D5982F195BE65
-:1011E000F75B26944CCC0CB14B7CE34BB49075CAA6
-:1011F000FA93BF3FABE27877A68F2FD988FB39856A
-:10120000621FD2C953D06B2AEACD1A118F998CE78D
-:1012100063B15E7460D0B2503B84B50EC67576FC87
-:101220008CDF1BF035007E30BEC6DC668CA774C434
-:10123000C5AD7806EAEFFC99BA02F5E8FE15097427
-:101240002EE94FE9DCFFDC19D72FB902F21D31B7C7
-:101250009BF1BD928E7B2651BA43D5567703AF3DA5
-:10126000F8D8B525B64BB03C8EE0F38BF44925F5A4
-:1012700040D7BFC44B3BD0DEEB7424E3BD06B6C6FB
-:1012800044FB7A8CB99F24BAB9DF3212FDE7B2FA77
-:10129000CB68DFAAFC57D327D3BD855526DACF808C
-:1012A0003F3A7FE25D3389CE3DCD6B14A9EF1A4AF8
-:1012B000DFF8E1E906BC1FD9FD8442F725AEFCBA90
-:1012C000F58F23F0DC63D30037A2E675B0EBF13C79
-:1012D000D2A7EB86D03D898351B574EE13EA33ACC7
-:1012E0005FF59DEBDD69B9585F75E0D18AC3F01DEC
-:1012F000EDE1C3F7AA4FE1FDC3B2587B349E973EA0
-:10130000FCBDEB5DB46BA1DCB112BE1F5EB5201954
-:10131000EDACC38A2B16DF1279F1B15925A9697892
-:101320002FDF22F039CB5E067C5E66E8A117D21F64
-:1013300095F13CFF62FAAC924D30FFC38F0EA17362
-:101340005F8333B4D674C0D3E90C6D2BA607C57D7B
-:10135000E5377EE0FB85BF3F519E8CF4F47B41C7AF
-:10136000AF9F294F2E0FB1772ABF3012DEDF30BB7F
-:1013700096E33CDF88CE52E87C366B4DC078F73C74
-:10138000E17F00FDAED816C1EE79385D253C75DCF5
-:1013900097948F780DD27125C94BF21B20FFF6630D
-:1013A000E5A4D70E5956B08368378AF38B6C67145F
-:1013B000BFEFB825CA1F9583F14F6D32B663A9AD53
-:1013C0008367D843F84ED4FFD8C7CFE77E0CF5D15A
-:1013D0007FFBD8F70F7BE83E84AC5F156BF7A1313C
-:1013E000F1B9DD6E443CEC37D61DC6737D954F9840
-:1013F00048EE573E91747737CA1BA0178C8F85AF84
-:101400002B35C344F0EA930F7D77944CD4F90777DA
-:101410009C930F0F3FB6AC64A3AD6F3EAC127ECA77
-:10142000E4274C744EBD6A8CDD88FB8F854FBCB9B8
-:1014300089EEAD2E8D1A85F713AA9EB010BEBAECB8
-:10144000769F03F74763EDC67848BF167648125E6D
-:10145000AEC4B88CCA8CD65194D2BD04B9AF7774DF
-:10146000C5830FE331CA63CC3F732CC0EF14220C49
-:10147000E0724ADECB0ADBE7ABDEBBCD5CC0CEB1AF
-:10148000CF779EFD3D205F7A47E242F7F96232C492
-:10149000BD9F9E7D3E13BD0B5125F6F98AD6F3F311
-:1014A0005B552BF8FB1D45093CDE7BA8CE878FC41E
-:1014B000E27A7D0EBC9FFB10D72F554CF15BE19F6C
-:1014C000D7AC5F6AA4FB8FE91C3E65E21DA7835180
-:1014D000EE6CF4D32B9F8822B8563DB9E02F8F4293
-:1014E000BBAEFA92C450BF3847D003F4CFF09EAEE3
-:1014F000ECE7F3FA9F6723DD17FD1AFC5BBCEF17DF
-:10150000CF5EB83907F194968DFB91B25ED5CA9F34
-:101510000DE6F5C03F063FB8EC5E95BFBFF6B2855D
-:10152000F41DF0782A0BB9CF3CAF71AFD93C2C78C1
-:10153000FFEB53C8E395FB907B60668497BC978470
-:101540007FA979C2DE7691FCA077784B0D0ADD5F2A
-:1015500002C945F77EAECFE0F6EBC40C7EDEA92CC7
-:10156000DB4DF75FAA1FB0B857E6F07E7AEE55E381
-:101570003927436725ED3FFED64271919AC6282D43
-:101580002A969F8B7869189D8B369A71DFC4C5E5C2
-:10159000C4F582FE6A5CD3AF417A81F27D463C8716
-:1015A00065E7F2B03A1EE0CEF5B06680714EE2BF5C
-:1015B00006F07ED346848CAF88EFD08F2B36D8EFE1
-:1015C0001E036BC2B80BD6BF6404C23161E66C9CCB
-:1015D000DFF32AF1312CFE817168DF3DAF8E46BF0B
-:1015E000B6ECDE9D93D7617EEB48BCB1C0CA5EF815
-:1015F00080F4C52281FF2E711EAC1CF278DF7F7E45
-:101600000697935E95C77BE60B78493A90E5D5F748
-:10161000F2F350D5AB2C64BF54D7FF95FAADB67733
-:1016200026A3DCAD7ED944F79817897997D767E56B
-:10163000EF03BA2A37C5D17BCB8B7D2566CC2F6EC5
-:1016400051281F6C97948D747ABCF19558A49F8390
-:10165000518141A887BA9746B9F11C9E8CB71D6F7E
-:101660001CF414C665E6393AED781F69DEF2014EC6
-:1016700094DBFB1D013396EF6FCD31605E7338F262
-:1016800031AF192FA7FC7171EE84FE905E148EE7C6
-:10169000C55B769AFBC3782D822EBE78FE83C1A8E7
-:1016A000A7AAB33B07A33E013A189C81707E56213E
-:1016B0003DBC640B3FA72EE96009D201F0DD424139
-:1016C000074BB6BFF213E4872588FF51BDE908E850
-:1016D00074177D7F69C364C6DBEF423A91FA0BF25F
-:1016E0008D2627C6DF441EC6C1FC5A014F289FC85D
-:1016F000CB7DC3F839B72E3AB75723EE2BF6C8A7E0
-:101700003EF0FC82C06379BD85E4ED0B02CF5DF74E
-:10171000BE1C8B78FCE2F99DBB719FA4FA25C5C164
-:10172000F7ABC2F842C0A506E1104BEB20BBA20606
-:10173000D71D1B84430FFD0B7EAC617C9D72DD3594
-:10174000460107592EDABF88EB4C42F80AB86D1FE4
-:10175000C2F94FF01BF233BDCF23D6E775EADFDDC8
-:10176000FE3083EB83D744BA18E802EF6731BC9EA2
-:1017700028E504147DB17503C57D24BEE4BC0F07C4
-:10178000F58816EF0CE2B1CBC0EF2F86EBCB7704D8
-:10179000FC0EAC4AC96E03B81DDF4CCF5412BD1A03
-:1017A00043C6937423C72B7A6EFA75B85EE83F8000
-:1017B000FDCB71F7FB628CD8CF7EC6F903E913E548
-:1017C000A7E4CBA28639D78DC473BFBE2FEC0386A6
-:1017D000E17A39DD1ECEE0E77F34B413A0BDD6A692
-:1017E00050DCF980F0E70FAC7A25B63C044E874414
-:1017F0003B4967F887F12839DF3D4E1EC70D9FB77B
-:10180000944372DE45F7CCBA0EBFCBF94B7A95F410
-:1018100029E128E954DE7F0BA757A235A93F559D42
-:10182000BC27FD784DE65766AFADF7F7F0BCB48343
-:101830000E8AF3DBDD498CC7EB1B537785DEF7811E
-:101840003F5BA8DE09D127CDC6107D22F57F4DA2D2
-:101850007614F1559CC9CF951C63ADE602E877F18B
-:1018600091CEC9F84EA2B43BAFFC3AA0C6611C6A47
-:101870003B3F7F26E1BDF8C42EA2FB6A712FA9EC85
-:10188000DE0F4AC6227DFFC644FB3165AB26D1FD83
-:10189000E3059BE6E621FDE07D0694E747378E19D8
-:1018A000CD9FF37224CFC47B0D1B1F9C790B7C9FB3
-:1018B000D7A6BA49AE433FC8AF65778E66482F07B3
-:1018C000A3BA4AC6A3BDFE53D581F6FA844D63EE92
-:1018D000C6FA13ECFDE2713DDAC604CA6BC638D213
-:1018E0000BD2CE95E7F21A4C9C1E466572FEB9A447
-:1018F0002755C479BC86C1B87FDEBD218ADE412A66
-:10190000358B7B9CAFA5903F5163C62B85742F947C
-:10191000ECB0F966664DE3E79DAD69F07DAFA9F3E4
-:101920004ED41F7BEFB48FA473F5EA7779E5DC7EA4
-:10193000E6FB8509FA7787E43C468AF1C3FB93ED21
-:10194000F788F3C607C5FC8F36FE6626EABFA39B61
-:10195000073971DD9FBF1645E7F03F0F7BB7F06297
-:10196000EF6901DD86DD835AC9E545A6FE9C96A494
-:10197000F3F3DE53FA28316C3FE0DCE78B4ED431D1
-:10198000BA4F6D015F98EC9998EFB7E1B9BECA16EE
-:101990008B03EFB31C42BAA7F33C2ABF776BE57CFD
-:1019A0007068EB483FFA8D951FF1FB45BBD6DE43CF
-:1019B000E70A2AC0AEC4A3543D76F2436B67221BEC
-:1019C0009C727B57E33B2FA736F37310BDDE2DD8F7
-:1019D000BB6D77E8BB05176B1F5FA85D2CE30A356D
-:1019E00099FA7BF112AED23F7A03F03F6E54104E5B
-:1019F0005FD6CD27BBF8449D97D293CA8107262096
-:101A0000DDDAE3E8BCFEEFDB1E54F19D95EAED2341
-:101A1000BF43FF76BC2DCE81FCFA65DD0ADAEF3CD0
-:101A200051574B69F05D573FA5576EEFA0765FB6F3
-:101A30008D6EC77BAEAFDBE284BC0FDFD7E178EC05
-:101A4000EBFEAE5CD7B19F727CCA791FDB3C3716C8
-:101A5000D7D5F17842FB1588C7983807DA7755E271
-:101A60009CC7E175DC7E3E628D7B662A9E0F597FA6
-:101A70004332BE8353D171E34CFC5EF99AE240BB22
-:101A8000DFFDDAF4588CA37D66EC8AC57B4D9FADF3
-:101A900093F7A1FCF41EE9F86246FB4EE30346E629
-:101AA000CAE15BCC4827579C30D2BDD3E3B81F8531
-:101AB000718FEFA229EEC1C43E53C5AB3C5ED2E3A9
-:101AC000C70A3F6E8258F75B994EB97F40DF8BC6DD
-:101AD000F1EF9FAFDF360DFB3BBAD1E4C0797FB9A0
-:101AE00091BFCFB010FC2FBC9A726433F76F16B65B
-:101AF0002AE40F1FDD0CFA19D655BDD4A4F1FB9AC8
-:101B00007AFA2B82723CD728E96FA1E627BA0E7FBA
-:101B10003F239EB5D2BDAE1F8B1E03997A3FAD8782
-:101B20000EFBC2BF8013F22DD2A1C4F3C2757CDFBD
-:101B3000DCD93AB200E949E25DCA05795FA1C1CCBE
-:101B4000F87BA58668FA3D80E936974981F5DF90F4
-:101B5000D83511C5E7B02C6E7FA845060DEFA1B1B1
-:101B6000064BC4F7A8FE26E4E89C2C46E93799DC2E
-:101B70005E90F7B1640A0BC9423D3D3DC6F98D0B3D
-:101B8000AA1C5EBF749A11E63F7D82F3CE016EC03F
-:101B9000DBFA9F4C3302DD4E1FED7CB93FE4BB33D3
-:101BA000EFE2F9CB9D634C90AFAF5F316D22D4B7BC
-:101BB0006769873243C691FDC2F7CFF1BB3FC17B56
-:101BC0000CD31A33BF1F7552E91EB1222758FF7D6F
-:101BD00085EDFFBD12CC779918BD03F34DA69C7F10
-:101BE000E4744C96763A734CEFEFE58CADA2F3714A
-:101BF0003E7EBF05FE3CD664BC7FC4E9A95CDE77AF
-:101C000069D2DF77616E7EFF4ADE4392F78C2E0940
-:101C1000DE9F5A7F31F7A74E9A60BD71BDEFB329A1
-:101C2000ED7FA0F7B01A7CAC2B8AF0A0BFBF521D8D
-:101C3000C3DFF75BF6F217BB90AC16487B05956DDA
-:101C40005EF0FE3E4BE5FBFE770A3AFCBC8E0D1CB7
-:101C500008AC7C7D6767AC0B267B625A6030F2B7BC
-:101C6000CBE2CDC8423F7E7D43E6B244BCF769710A
-:101C70004F85FA47FCFC5EE562616FB28D4982CF09
-:101C8000D5C0D5506F4FCE25F47EC3A02CEE479C17
-:101C9000C80964E37B3ABE1CEEDF403D3ABF56BC48
-:101CA000F29A24AC7762EB3D032B006F167CBFCD1C
-:101CB0004929C3FB4FD742DFE39CF4AE1B53699F16
-:101CC000D64FFD61BD58D4EBAEB9A93C8ECEEFCD59
-:101CD000493C49F8F7C20B4C01ED5183959970FED0
-:101CE00097B0F50EE453891FF9FEE9B29779FC64C9
-:101CF00099D2D59880F9E7153AFFF6B995DFEBE967
-:101D0000ADE7369911D4F3D7CFD5BDCF23DF19FD79
-:101D1000B1E34053B3847C19C94686BEE35A25DA41
-:101D20004E524B5DF8DEDBB2242BBDDBB1EC8901FA
-:101D3000A44FD8DB77B0D07A6C7D02D1C7EA1C956E
-:101D4000E0BCA08DD1BB3B256DE9745E716A9B93AD
-:101D5000D2D833A9F4FDE8337FCCE5F287E3A1E4E0
-:101D6000BF520AE97CD07F0DA194F5F5AEB0CD4A03
-:101D7000F76897EDE57A69D94D2AC52799B81FEE1E
-:101D800011D3F1D89A289EE36191DF8FF5C8F763EC
-:101D900035D339DF8F95F0B508FC84BF277BD3DEC0
-:101DA000D1A9F41EAB784F76B6A8D729EE6D85BFC2
-:101DB0002B7B4FEC647A5776B65615F15D59A32FFD
-:101DC000CA8DF6AD29D3C6DF6BF086BF33DB65C4A1
-:101DD00075CFCCE7EFCCDE343BE45D04F8CF94FF65
-:101DE00015C969537EAFF7814C48DF168FBE7EB3AD
-:101DF000C4FF25EC9273BEE39B69A677DE8CF89E48
-:101E000033E4678A777CD18E43FBFC94C6DF95B3BD
-:101E10008877A63B596E2AF2FDC5BED3FCFFDBBB1B
-:101E2000CCE1EF2F87BFB77CD9E665BAFCF0D6FFCF
-:101E3000D0D5BFBC6DA5AE7C64608DAE7CF49E5FDA
-:101E4000EAF2633A1FD3D51FBBEF295DF9155DCFC9
-:101E5000EACA271C794997BFB2FB77BAFA579FD9CC
-:101E6000A1CB17B03FEAEA17593FD0E52739FEA1C9
-:101E7000AB7F4DEA415DF9B5AEE3BAF229434FEBD2
-:101E8000D763F4FE0DE57C89FBBF75EDA631D72F36
-:101E9000F0FDE75989067AAFE31F59C27F1174F745
-:101EA00057A9B707B26C945F93D4FC00D15D9BC275
-:101EB000DF1F0ED363C6E31E0DE371EC157EFF2B0F
-:101EC0000EEC3E63C878F19A151CC2603EA1D8A101
-:101ED000CB27795275F55366BB74E569DEA1BAF27A
-:101EE0008CF96E5D3EAB769CAE7EBF159A2E9FE35D
-:101EF0002BD6D51FD0E4D1E507B5CCD6D51FB2CEB1
-:101F0000AB2BBFC43F5F577ED9E65A5D7E78EB0AA4
-:101F10005DFDCBDB7CBAF29181265DF9E83D2DBAFF
-:101F2000FC98CE75BAFA63F7F975E557746DD695D6
-:101F30004F38D2AACB5FD9DDA6AB7FF599802E5F53
-:101F4000C0F6EAEA1759DFD7E52739FEA6AB7F4D81
-:101F5000EA015DF9B5AEA3BA7269B74C19FA95FEFC
-:101F6000BBB0634ADCFFD4B5F7158A77A55F52DCB6
-:101F70000D2E584F767FAEEF418046E1BB883E0F75
-:101F8000C57D9C78B00FE514DEBB76F27331A514E5
-:101F90003F4A243B8754910BCFE9801D108BDE55BF
-:101FA0004E0EDAC931417B2CF36CC839B9F3D963D1
-:101FB000D764339AC75DD9DEFCEC24F43FB64EA655
-:101FC00077C1996F35CE43BE73F76ED87BC832BDEB
-:101FD000D67A841943ECBFBD512D99A3CEE1BF5FE2
-:101FE0006B3DC1F09DE59E7E45BC4281F52D0BE920
-:101FF000FF01F0178C03196BA903BEC17DE13A07FD
-:10200000E51FAA4BA5FCC3752E4AD7D50DA5F4B183
-:102010003A3795AFAF1B47F927EB34CAFBEB8A2958
-:102020007DAACE43DF37D6CDA6FC33E01763BA19BD
-:10203000FC644C9F057F17CBB780FF8BF917EA7CB8
-:1020400094B6D635D1F797EA5A28BFBD6E1DE57F05
-:102050005BE7A7B4AD6E33A5BFAB6BA5F2F6BA369E
-:10206000CABF5E17A07CA06E0FE577D475527E576D
-:10207000DD3ECAEFAEEBA2744FDD114ADFAAEBA63C
-:10208000F2B7EBCE50FE9888B72ECF5674F7956412
-:102090005EBEC720EDBF6968BF23718C337DA9B3D5
-:1020A000DFC3ECE8707CC87182EF270C7EAA21C4E4
-:1020B0007FF26573FF4ABEC710FE8E0213F6A97C3D
-:1020C000F754BED75029E65525F8610CD2E750A247
-:1020D000CFB72FC65F90FEA02DC9DB42F49965F003
-:1020E000913F6CE3F7892F4FF23E983D06F70B2B9B
-:1020F00076D3780E37ED1B96580249B372E99D707E
-:102100008ACBF5355E8D38F7DD67F9EB4733D19E25
-:102110002EFE41A577B6DE35D967A3FFFF8CC0C37D
-:1021200033D9065DBA2DC9BB09E7F3ADBDF6360359
-:10213000CCFFDBAB963E73474ED04FBE1E5D4DF0DD
-:102140006FA6339789CE1532EDCD1CB49BC0B0C2BB
-:10215000FC2CE6A3745CA2F705ECE76630B831EF1F
-:102160001D6FC98EB4AEF079BD2AF0F56AB64197FD
-:102170001E48F2B621FCBEB56B34AF77AFB86630FF
-:10218000AE4BCEABBF7877641AEB7E12E7F7ED6B00
-:102190005F1D560604E12FFD71BAD78F726CA9221C
-:1021A000DEB5EBF58E009597DEA9907D3607FC191C
-:1021B000DC1F92EF069CAA35D13BF2F8CE00EE9FD1
-:1021C0009DAAFDCC86E40CF518EE6F34E0011D28C5
-:1021D0006FF829BF4F5F8AEF628CC2770BACBCDF10
-:1021E000BB15A2BBA4E41C7EFF19EC3DF29F12BB01
-:1021F000E99E1ED0C99F116E0BAF50E9DEF9BB06F8
-:10220000FF6085F6932BCC0ACCAF2A11E8A37FDFC1
-:1022100074B044DC1790DF81BE3E41B87DF9EAD846
-:10222000A1147F7FFD0A17C2ABC1C0EF0FF9DE52C8
-:10223000F9EF2E0911AD4E184E71466674BB315E32
-:102240005422EE9B74A86C45A4F7C4957E9C8EDE48
-:102250004DE5EFE73584EDB3FC53D0D53F05BD9593
-:10226000ECD84BEF082DD9C3DF3B64B95DC342DF27
-:102270009DE959CF8AB72E1918B28E9AB603FC7C05
-:1022800005EB1A167A9E3C5D8C2FE94835DBBD1BA9
-:102290006CA1F3EBA16BD60FE9271EE87A00D1F50C
-:1022A00061DC579C6671C5CD82B40B4084EFFB782E
-:1022B0007FEDA0F341F29CD03CE6A1B40AC800E94E
-:1022C000D8E35B4BEFB92EC45F62C5F778C6CDCDBE
-:1022D000C67C0DEB9E980A70BBA9A9FE4D7C0EEF43
-:1022E0008696B59330BE3AC35FF626A6D3372A87C3
-:1022F000D14F05BE88EF87F110A576151EC9BC65C4
-:102300004BC12ADC7A99A6727CB03F727C00DD68F2
-:10231000AAB3F73A810FD2F83A345A871A5BACE382
-:1023200083D2954C531283E7DD7BF862DCA24F70B9
-:102330004B8D19BB69DFBCE6758B13F1BC9071BD89
-:102340001D8C67487DCD88CE17B16837D63B26E80F
-:10235000FA581623BA3EA630BAA72EED4896ED4D90
-:102360001D3520A8778F19FC79B103482FBB71BDAB
-:10237000BB536F70611C6C51A295DE3F3D16EFCFD1
-:102380000E7BE783DE239271AC074C3CAE143E2FEC
-:1023900065DC6EFE7B1866E6C3FD09FCFDE33CE4EC
-:1023A000677C3747A177A0BB90EF4D851E57A4FEF1
-:1023B0001B45BF7BBEE7FEAE0FD683F71B7B8DE3CD
-:1023C00010E344F371A4FEE8F9BDE564A61B6F7A3F
-:1023D0003FCECFEFDA359A7FBD219EE44D9AD5EB03
-:1023E000417CC9B88EF403F7E47C3E90FCF5EF1A0B
-:1023F00032D13EA77708D0FEBE8ACBA5774D2E7A84
-:1024000077F7DD821C8ADF4B797BFD381EFFBA5ED1
-:10241000C6BBF2C3E25D61F116961F39FEC598DBBB
-:1024200084E35EC23E92F0A138CB8E7C23E15DFE58
-:10243000BED20EE17F9E2A4ECC453AFF5D3F5577D6
-:10244000AE40A66B447CB439ECBDEB35B9CB1C78FF
-:102450001EC0F23CDFEFBDBF307A7EE839F42707BB
-:10246000F1F329EEC1059B114EC36CFE4252CB9A8B
-:10247000D185F356C43A2E73009C0D686F7A449C44
-:10248000D36DE5F1A589A497257E2F542F3F6BF4DA
-:10249000AF8CC67526F2DF19B0AFB392DC545BB5D2
-:1024A000001E89FE72D08C5548B7CCE8198AE374B7
-:1024B000E445331BD4FFB6C34CF1A7D70DE5BFC627
-:1024C000F3EADD7FB3303CDFD06ACF30A271DBFAB4
-:1024D0003DFF5DAB56FB84C9FCDD491683EF638E7F
-:1024E00074B0A75F44E4887B61AD0ADBC31F69D584
-:1024F00062F07DB756033B7D35CCEB25DBA8072F7B
-:102500002712F3A8B8CE67077AD7E13CF2582DE539
-:10251000EF377BE66F8071EF775A892E0A077A1EB4
-:10252000E7F364ABA6C2FCAE2A52E8F7D65689DFC1
-:1025300077B0BBA375EFEC7ACE0C263DF14C3FAEE5
-:10254000571B53B54EBCD0D127DC1CC66EDDFB58E3
-:102550002C93E272128EA1F872E4E9F0E53585E27F
-:10256000ABE7776B24BEF8EFD65C28BEEAFA319A67
-:10257000AFA4475FA16BEDC45CAEBF1AA89623174A
-:10258000FBDF119D312CF47701243D4AFA8C4097F2
-:102590004B77A2DCCD323830FE79CFD468D263924B
-:1025A0004E257D7E9CD343A743FA631CDEE69984C7
-:1025B000B2229C4E31BE154A8FA57DD22D7384F276
-:1025C000E534B013E29C68D71CD9D81A428FA5B560
-:1025D0005F19B99C387B75745E301E372D5F619F23
-:1025E00086E215FEFB74A8581FD93546F2A724FCD5
-:1025F0002E14CEA61BEB87A29DB61AEF0D02BC9A35
-:1026000014B79602FD196B0FDC81DF57897BBBBEC7
-:1026100061666E3F09FE90FD7D39A8F038D2A37D3A
-:10262000EC89984AA8F76DB2C185C059E52A7F9117
-:10263000F86D5F0CBD37119BD039FF69E29F210C0B
-:10264000F7F3BE5DE0ED87FBEAF7029E3EA5FB399E
-:10265000FE14FEEE61570A7F5FD625DEA1F7A6F2D3
-:10266000EF4C94FB297F474E7FE15768A27E17D538
-:10267000BFD7DC628DC67172AC8EA742E8FC6A11CE
-:102680001FFF1FC180237D00800000001F8B0800FA
-:1026900000000000000BED7D0D7854D5B5E83E3309
-:1026A000677E330927C9240CF98133C92484640265
-:1026B000930410446512020D083AFCD520890C8A57
-:1026C000DEA82493426CA3D77733908001EC2DA22F
-:1026D000B568793AD042F1AF3728A5A18D74127E42
-:1026E0002E5A2A83D5165BB581FAACB60582785B83
-:1026F000BC9796BBD6DAE764E64C2680F6BEBEEF02
-:10270000DDF7E65EBBB3CFDE67FFACBDFED7DA8791
-:102710001C59C7580663EC52BB3C3F99B11C59A0E9
-:10272000FAE36D5B7D1FB818DBD016A2327D6E8890
-:10273000F94B19B31605E520F433AF65FE2E1B6384
-:1027400097F1373D5A3EE014199B04ED7D4F311946
-:10275000FAA5BB3C821FFAD9E7C278458C7E97E187
-:10276000BF5B180B8E28877E3B98974D646C9D6CE1
-:102770000D0585A1E3DD925175544C19FA7CB0FD2D
-:1027800006819D3647C7C5DF69751E3D8CFF57BD65
-:10279000BFCB8D35878E6532D6827D65C6AAF3E0C4
-:1027A0000F9CB7D5B8DD04F34E965369DF9FDAABC3
-:1027B0004630F7F0F33DD3060B2F642CD466A67297
-:1027C000479BC48246C6BEDBE6A0FAAE3699CADD98
-:1027D0006D45543EDFE6A1F617DBA650FDFB6D5EAE
-:1027E000AA77B5D550FDE5361FD5F7B6D5527D5F32
-:1027F0009B9FCAEEB6062A7FD4D64CED3D6DAD54F4
-:102800009F6E62CDB49FA2A063019C47E78346AF51
-:102810000CF06954CEF1A0372FDD6367CC52A4636E
-:1028200026E86639B685E17E2C0E9D3704E7B0DEDA
-:10283000B185DD05A5617272A73002F6FF92AD5336
-:102840009800EDE2E34C86E7CF08C106E6616C91A3
-:102850003CD6278E62CCE5F84A551AD46F974B3791
-:102860009B9D8C15CAF36BD7C4D4E5E4F2FBF64804
-:10287000D1FA18F776D10AEDCB421336DB05BE0E3E
-:1028800096C5D8BD72B96F0DE051388F0511EE03B2
-:102890004E636807B4AFC0F31271FD12ADFF66D688
-:1028A000EED0C1FAC7C8C6722650FF30B35F7BFFB7
-:1028B0004659A6E7F1EF5DA99F6EE235F563FA2B65
-:1028C0008C87EDC215C6310B0BCD1158FB2603FCCE
-:1028D0000F3C0F66D8423B015E9D06B6CC0770EFF9
-:1028E000B4F0F28893D3DFB3CEAAF14EA0A3F14E99
-:1028F0007EAE9D96A05485F397EA3C3B109D5B9D70
-:102900003FCF83F9BEFABAC836CA51FCEC403C80CE
-:10291000F70AC6247B711EF68FE65001CCF3A53171
-:102920002F75A441BDE03B1E8F1EFA6F621E2BE285
-:1029300049F0511DDB09F51726E6A7CD87EE259353
-:102940007E90E6077C398D7C00C609315683F8B647
-:1029500066DD3D63FAA1FCD309FF1809D6F9B83248
-:10296000CF7643A499CE73928DE1BE19DB9CA473FC
-:10297000407F071CD2758CE946F1D268906EC77E05
-:10298000C675461684F518FF729DD907E3B55F3406
-:10299000D5201F612C92A49B02CF2D7E29159E6FFE
-:1029A0000EEA882FB4CBB69000E36EB2951F95A1C6
-:1029B0001E94749E0284A35B4770ECB07D39A4879B
-:1029C000F144614D03CB87F54A2F9B9DF03CE4D643
-:1029D0004948E721EF821AAC07FDA2A74056180428
-:1029E000B6FBD3421B715C36F0D309D85EC73C08F6
-:1029F000877599FFDE9704F5F6C59247CF7BCBE24A
-:102A000064C646E15F3065BBA17F6D12AE6309EF1E
-:102A10000F7F79E6031DA698F8F97DA377B6945742
-:102A20008ACFC5603FE74BC2652044D1E0317BA02F
-:102A30007DBCADBCC60BA5985C6E96619F1D52B95E
-:102A40007939ED9FD918CC93CE387F6A97743521A8
-:102A5000A5FD2EA477911D724D2652A2F60EDB968F
-:102A60005E84877837634E19D707F3A97C0FE0613E
-:102A7000CEBFE1A80CFBE8BC278DF6210A1EAAB345
-:102A8000BB455A77966C0DB3F1708EC6794719F035
-:102A90008F2CF3FD73B13EAA41FCA03F864F8FF40B
-:102AA0006BEB19B5DA7A3A83BA393AEF6F14F91148
-:102AB0000FB778788C923A4EE0FA47F9457A18BF0A
-:102AC000FEA7A427522B19AED346EBCCB4DD59098F
-:102AD0001082A17D6B10FFFED6758E9716989D30E3
-:102AE000FF78BB0EC1C926B081B538EE2605DF3BA5
-:102AF0009DFC3CA374A557E97224D2E598561D0BA2
-:102B0000C6C81D67D0CA8231F3E577A669EA059B7E
-:102B1000B334FDC76ECDD3B48F0B156BDA4B7697FC
-:102B20006BEAA55DD76BFA4FE8AED2D4CBC2733453
-:102B3000FD2B8E2ED0D427456ED7F4BFEEE49D9AA0
-:102B4000F6A9FDF769DAA77DB44A53BF71E0214DBC
-:102B50007F20E386AE04723255E1571D0E6FC49B91
-:102B6000409EAB2593C481C1F300DE69720066C745
-:102B7000CC97ECB1021247EBA099481F2629759219
-:102B8000EBEDF25AC4E71423E1B388F21CEAAB1E62
-:102B900034864C88FF377964E42F2627E763FB0AE5
-:102BA000BDA39DB0AECA1433C905D1C6FB89B659C1
-:102BB000A4A78CDE0A7CA902EA121B6C4F42FEDC41
-:102BC00016F4B95CD1755BA4CD0CE9B732A586F5D6
-:102BD000DBA2EF8B9297F993713E99EB3F5290FAFB
-:102BE0005964783F665F07743A66433EDE0B7202B3
-:102BF000C6EF4ACE1691FEBAFE525C4D65F2B4594C
-:102C000088EF6512FBCEBF40FF2E811D65A02775A2
-:102C1000E9D885E9B0EF976DE58F83B806D6E8D39C
-:102C200023BF9BCC9AA91CAD63562CB70BFDAB19E7
-:102C3000F473379FA81A09FD9E77F9BDB8EFAF83EB
-:102C40000E81FBFAFA78AE67ADCB9C23A35ED6E982
-:102C5000EC3A9A87EBC900B9828420FA3CA857A8BD
-:102C6000FBBD4F394F31AFB31FE5DFAA54B38CFA28
-:102C70009268DEECFB00E0F58CA1FFB976A877083E
-:102C8000D2CA2EE48B0FDA3C3B19EA8F1C6E72B26B
-:102C9000AE622D8CDBB5C62BA6427BD706E6E9409B
-:102CA000FAB057AE4D85E70539CB7569480FAE359B
-:102CB0006BB1AC73E611FCC6B9B7EBD2A1BD6462CF
-:102CC000652D43D92BC17CE9C3E3933E652BC3FD3E
-:102CD0003097F821E2954E063E034BAF4C83F386C6
-:102CE000792D78DE02950407CB455BC8827517877E
-:102CF0008BC52B8492A06E777905AF1BDFDB4AE78B
-:102D00006B096BF5D82A97FF3EA47FFB5CEDB98A6F
-:102D1000E627687D9B749C2E3A53E563289F3B9D74
-:102D2000AEB47639BA4E95AF3CA0E86BEA7395AF76
-:102D3000FC0ECF2023AADF009E6FD5E5A37EB699B7
-:102D4000217FB23CBC99215E5BA4A0CC500FFFA7B1
-:102D500020E1B9AADFAE5668A63AAFD68CF2FA8265
-:102D6000BD9CF4594BEB2E3AAF78B859FA75CC7B31
-:102D700005B8A6143E4DF21D18B05C00F0E9CBB4C6
-:102D8000356C4FA0F78F50F4850D40C61192573E19
-:102D900033F26B831EF455926FB06190071724468F
-:102DA000F28B7539A9BE3A95D7D5715667948FBC09
-:102DB00092FE6DD96A66FE987D6C8079102EEB2E9E
-:102DC000CDAF41B8329188836DFA8B7BFB46A02F43
-:102DD000D5AE19A1E82B39383794A38D8CEC028F2E
-:102DE0007D6E0DD29DEF621E09DF83CE346AF7043B
-:102DF00099BE99D66D50E592EEF2045AAB6C54E54B
-:102E000030A9B65C6EC1FFF75E1690EFC7C8315EA1
-:102E1000905C57E576C1666DFBD8ADDAFAB8D09014
-:102E2000F7DF42B9BF98FF0D7241DBFEB422BF1736
-:102E3000A3FC86922D3290DC33C38A2E73B91B9586
-:102E400083C01772BBC295C846735A62E421A37D42
-:102E500068E463954B26FCF31D150D788EBE8B60E0
-:102E60007C540CE5CBA34D1CDE7DC6E4D05A78EF34
-:102E700051B08BFCD0753DD8437E20B5AF8B9E5FA3
-:102E8000D6A19D7554EF018C1D3CA7F873F5E4A9FC
-:102E90007AAFEF2DA403C6FA2B7CC97C3E7FCC7C95
-:102EA0007DD694F10CEC965D85FE5F61BF4F6AECB8
-:102EB00013913F98729801E913E767CAFCCC88FA2E
-:102EC000333FEF4D9E379B0FC23A1E396942759CC6
-:102ED000CDD41F3BDA06F555B922F133E9BA95CFC7
-:102EE0005A810F54FD1ADAE19D47647924E9E947D4
-:102EF0000D0CF5F42A058FAB14FBEB9902038DFB47
-:102F000089225FCE3A55BD276845FD172C022BEA72
-:102F1000B325BB81176BCF3389B77B49DF2DED8A92
-:102F20006FF732A4E362055FA06EAB847A9952EF2B
-:102F30006242BA04E738A1B6BF0F4D09F76B87ADFF
-:102F400088877B2C5C7F7B5EC1874C2678C2B0FE75
-:102F5000CCDD364F08FA25EBD99E08ECC373483C0C
-:102F60001D7BEEE37BB475378BA93B711DDAFAA3A9
-:102F700072B3807079B40E7474D8B2352FD9FE61F3
-:102F800009439817227ECDD4DBCAD09E5A55696377
-:102F90000857D3A9B1DF8A20FF38A1672817A424D6
-:102FA000F9B16A785FFA69BA678D1C3DFFE7DB907B
-:102FB0007533F6E4650FEB009EFCF52A6B03EABF60
-:102FC0002FC279A21CF93ED8D9D8DE05E78AF59739
-:102FD000C1CEC6722FD8D9F87C1FD8D958EF063B7E
-:102FE0001BCB1F819D8DCF7BC0CEC6BAA7B072749C
-:102FF0001E9C4FBDCD375340B87A455902BA12A234
-:1030000070661F1661BD5FB80C045227B17E13C0F5
-:10301000F5F81899CED7C47C0CE52BF37BCC8897B8
-:10302000571FC7AB8EE337241A670A8C4376825941
-:1030300042BF481EBC31029E9F79F057BB505ECC08
-:1030400013FC1E5C6FE3A4D346AE3F0F18B1FF36EE
-:103050000BE03FF0A11C850E8255004F94BBAFEBF7
-:103060003DEDD0EBA619A7566780FD5D95E79C2F37
-:103070004E85FAFDA72A4643BD73C7A6F968CFDF80
-:10308000F4BD53AF64030F3E9B378FB73F7EEA42D8
-:103090000EB48F605F9B5F0DED29E95C3E6D1358A8
-:1030A0006DAC7E776B1EC7F340EB169273C0DF19D1
-:1030B000C2A13DD347F2F19C7D206539F40F640C29
-:1030C00064DE7905FE1D687D92E4507BCAEF49FFFE
-:1030D000681F94171E9217EABCAABCF844C13D555C
-:1030E0005EACB2F0EA603F7F3E3D7F5CF1EBB050FA
-:1030F00001D5D32DBCFECF55F271B47B003E64E701
-:103100001E4C29FEC60D6857D6881E13D41FB795CE
-:103110005B50DEFCA3C27F60DC20DAF1C199E6D00F
-:103120004E3C54BB4CF498A68E6F77A1D2C5D29476
-:10313000751CBADE1A463BBFBDDABC03F5C92DB615
-:103140003C1AAF7D8A3188FE15B5BEF6FAEBCDA8E4
-:103150004FA4A6A439B1AEF2A78D80F758C24F8F05
-:10316000E35629DBAD32DBC27AE4E766C31F63F5C1
-:10317000641B8B10FE7874609000BD19F3395E55A6
-:10318000304F2D3E370ACD4144C66DB876DC47B28C
-:1031900091FC0C8C65F375ABFBF066F37DA9FB48E5
-:1031A0003606957D909EB4C5A60BA3BEB705F685E1
-:1031B000E305F264824FFCBEE0E7C371674C51D671
-:1031C0002DDDB017D73153E7EDC0F70E7F566707F7
-:1031D000F462B358B388CFF3C1A2FDD04CA2B3E3DD
-:1031E000F215F40E14E41FC6C8AD9B7E2BD07ED81A
-:1031F000FD463A97CD057CDF4F1B434E46066E6871
-:10320000D482E4E1F1F78521F8EB65484FED695E82
-:103210008EBFD240CA1AC4DFD481CCB5B4AF70C25D
-:10322000F388C7E3F8F3D907FF2972408FF0BDDABE
-:1032300079AAE7A8E241BCFC32E64BEAF93A689F7A
-:10324000DE224E07AA1EC5C0CE491E0ABFF5309E1B
-:103250005C18AD1B1D3ED28F0D764F11FA6FDBFF50
-:10326000AA6F48E4BFFD5081D39A142BE9CDED2914
-:103270005C6FEE4D99A3B177AAC1FE11003FF4E94E
-:10328000AC0BE9483FE276F27FE947A28684EB8AFD
-:10329000D34747CCE5FAA804FA688279D552447D31
-:1032A00034819E3AA88FA6CDE1FA688A91F4D16D57
-:1032B000C9C6DAED09F8CD813CAE5FF7E23E12D81F
-:1032C0007B60E7911F52B5F38C929FEC35759F0799
-:1032D000147C57FB9BA466867E31BDD123A3BEA977
-:1032E000B772FDD104DB2C8A91DFEAFCFBF30CF40E
-:1032F000FEB70BB91EAF3373FDE4A6E3427322B8E9
-:10330000FF5981FB7078F737E00DF185729BD18B07
-:10331000FA41B9CD5185FAC170EF81A919FC282D68
-:10332000CA573C7F9DAC27F9237A1C88675D86FECF
-:10333000578EA31D77D846F246D59BC14EF57AE04D
-:10334000E53DFF0114A81B6A9F82DD24E5C3787D5B
-:10335000AB3227F2F140BF2B1DAA4FC6FB0106E995
-:103360003C659793BF171A85EF09ABA68C447C8AFE
-:10337000A773B5CC75BC9EBB02D6953BEA2895EAEF
-:10338000F3FFC9F4E4578BEF3F365F853F97C7E300
-:1033900060B2117A92C36371DD675ADECCF4C05219
-:1033A0009AC4F3248F3F699E32E21199F3D9DD2844
-:1033B0005FBE22129FCDB9B737352DE67C9F6EEBED
-:1033C000CE155D182F88E456BBC80EF0265AEF4282
-:1033D00075FEF018E2CB06E5FC657B64F65880B715
-:1033E0006CD379D0150D425743FF95626AB504F34B
-:1033F000E7B6318F0DEA4E26911F2BF7B29EF02CC7
-:10340000F7E012C2DF31F60121E88E990759704CBE
-:103410003CE4D3E66AA2CBDC9183F61BC50D3EB536
-:1034200087E7235D7FFA045F51EE77B4ED205BC937
-:10343000CF7C4F8B358426E09887251DD6739F154A
-:10344000588E13D771D0F908FA697E98447E1AFD18
-:103450005617F9599E15FCD3F2812ECE84E4AFA203
-:103460007D4B3FE8D7F835EB8E8D24BF22B3497EE4
-:103470003DA0633B13F8916ECFE7F6DCD27C4E5F44
-:10348000B98E3772575460798CCEFB5AE9A813F97C
-:10349000358CF3C888CD14E70A56B122B4FB3A0D37
-:1034A000805709E8F45FF3957899CA8715F859D0E1
-:1034B0004A817DE80545BFDBFDFCF3CF67A2BC6612
-:1034C000A8DC0DD29B3A4E525117352679BC0CFD23
-:1034D0000D82E4E5FC550A3A8218D7F98B3E215E4D
-:1034E0003FA99CDF1AE77A07F6AF76791C4807BD3B
-:1034F000CEC98E3B017E369B919962F8AF8A2787B1
-:10350000922793FEA18EB32A39EF8A76B611F8B0CE
-:103510007C05F96C447F37EA317D53CD32AC77BD01
-:10352000AD3C827AD67A9BBD9CFCE636E017317EB4
-:10353000249BED08E1A1CDC3FD6B36E4BBE8475207
-:10354000F6DFEB3C42FB57FBAD52F88FCD13E67133
-:1035500047B062B09F45F405D1BEB0D819D99316D3
-:1035600033A7A724380E730C1F51E7BD3F9FDB69BB
-:10357000EB73CA2395B43E113D016CBDA3DC4172CF
-:1035800010E18C7AE8A8413D94FC25CF297056C7FC
-:1035900069EFE5FBF4B53ABCD5E9687FFA9E45BE14
-:1035A000B0DE76A73988F22079E215C77B255FD097
-:1035B000F87BA2E3B5CE50C67B0EC7D327974B3816
-:1035C0009E01F94402FC0B2BEBFAA2FE3080A844CA
-:1035D000F61AE37A1560BC2391FEA09666C5AF3556
-:1035E000F43DCE279D8ADD027CF218AEBF31E7F4B0
-:1035F000914AEAC5ED95B4D9629108E7F5099CA016
-:103600005E88DAEFF17A4CA57E80E4992A8754B976
-:10361000F434EA31C6283DA97E97EC061FC96BC178
-:10362000EE23BC01BD4646BAD163BC3701DC24178A
-:10363000879B903245467AA9BED49F4D723EF9A32E
-:103640006C16E33F53F9E1A1CF7659B0FDD386AABA
-:103650002BEA2B6A3C78B83870CA43BFFF4AACBE2D
-:10366000325C5CF86AF1E0BE1423F9DD9E11B47C93
-:10367000C9EAE2FCC8E052FD27FEBFE0393C23F86E
-:103680003CA42F2A7E947D857EE642BF57A79105F4
-:10369000E13C0F7C36D981F871ADF055FDE6598AD1
-:1036A0001E9565DB25209D66358404F47B673774A1
-:1036B00009DE2BF47B07E93923DADFA08C3F5D1CA0
-:1036C000D0A3BC9AAED071F6459115C5E87F6FE5E1
-:1036D000733DCAA0E8ED297DCF5970BC3E9DAFB3C4
-:1036E00010E5438A4EDE1943EF867BCBCD5531F092
-:1036F00069C7784E82F32B770DEA5B6417A9F2D67F
-:10370000A0CA09BBA8911381248EB7AABE13B89E84
-:10371000DB4182E02F41B89EBBFEF7B7E016CF0930
-:103720006183DD79F578C6A05EA30B2D57ED17A454
-:10373000972E83DCDD4FFA558A07FD00AA5E55F609
-:103740003D211FFB79042FD1C924E6A7F23AC6F523
-:1037500040D0AF6E7091BE075B89397786AE88CC5A
-:10376000ABEFAF00FDE018271023E44FFDFA2581F1
-:10377000F87B3CDCDA06E13618CFD3F845B315798F
-:1037800097ADB4CBE81775627C4AEBB7AC38AAADFD
-:103790004F8A68EBD79D8CF38306BD6FBB3279FCF3
-:1037A0001F07DD06F4867C628512B7CC09862A25C0
-:1037B000586F2EEBA2F86076439A06DE37E995BC87
-:1037C00009E61598BA4EF8658BF33EC6F75B5C8345
-:1037D000FE3BD2BFEE51DAFFA17AC5573BD096DE51
-:1037E0006C20FFA819264778FDC3EC0533F1BC8790
-:1037F000F8579BB57ED5ECD87680C33DDB0C9A7626
-:103800009FB78CEC82858ADF7670BFB88E0CBEDFE6
-:10381000ECF2A1F35F7D5EF82F6DE8FCEAB84F0390
-:103820001F42FECA2EC1B94E46B831F440B05C31D9
-:103830002C609C3AAB9979514FCE6E61DE44FEFE0E
-:103840005D0ABCE2E1CC82D3097E33946759363DF0
-:10385000D9ED592D3AD20FB3804F207FB86525900E
-:1038600011D4B357CAA45FDEDAA063281FD8A536E7
-:10387000CDFBB05CF27FAAE7FE348E87FA65230B9E
-:10388000E9703FCDC54467B4AEBC283E00BC4E7362
-:103890007899095EB74E3168FC9CB9E8D78C818B6A
-:1038A0008A07D971CFBFE492347401726E978BF09E
-:1038B00084CBBF02947FB0A433534FEEEA82F5DD90
-:1038C000B496D17E0752AD219E0F31183FD05F1EB6
-:1038D0000B7CCB3CA308FD2C9B24AB0EF3160EA453
-:1038E000F67F9BA532D60D6A71750E633FB10E94BB
-:1038F00008503FE46AD8D27923B45B065E40E7AF54
-:10390000CD16585013534F49695F5083873685C988
-:1039100022C0C78A33C03EADD29CDD7A98DFEAB6BA
-:103920009153D2CA06E994F6D371BDFC28E67D74A2
-:1039300014E8487F62B1EDB08FB20249A1036F1164
-:10394000F18F1A1EC78F1D5FB45F61FC3930FEC452
-:10395000CF31BE99AF3F131F81DCC9C4F5A3DF1A75
-:10396000C7C7F345E751ECFCCA78220B6EC7780B4A
-:10397000CC6713F87C12E69564326D1EC1E07C12B0
-:10398000CC57FA77D84FEDD0F3305CE93C6EFF7C32
-:10399000E7D1A1F3D27A83E36D64173168D64D463F
-:1039A000FB83CF6711D921B19CC3B5637214AEA05C
-:1039B00007D2B8D07DCD6505CE0684B36424380F18
-:1039C00007B73E89E7356D90ACA135CEFF03E7E53B
-:1039D000E0E7153B1FEA93D73CDFED309FFDDAE7C8
-:1039E00043F822FD0CC217CE646DE6B5C317561519
-:1039F000BC16F8F6C1B8BA18B846F3879E92D02E16
-:103A0000B0187C660FF0DF9B0A5249DEBAED0BCC92
-:103A1000944F90B1C08C797AEBDCB61ACCE75BE7B7
-:103A20005A6436C4C8E975EE3A6A87FE94F7E40E24
-:103A30005BD16DC14A5984FC021B6EA8762C47FCF1
-:103A400069E679546A5E912A0F9912AFA47DC18B01
-:103A5000236EDC3BD007FD37344FA4BCB111A9FF66
-:103A60004EF9529B1A3C1E6CFFB685C71D9F54E24F
-:103A70004E88A8E4571B7FFD7730FE5A5EB04AA0FF
-:103A800078E3CA2BC71BCBCF47AA30EF8A2DE77943
-:103A9000558E3A314E1E6AE97613C295E73F85048A
-:103AA0000E5FCD782D05193C1EEDDAC1D0EE7B05F9
-:103AB000C6D26BE94B877948F1F4281ABD5225EA42
-:103AC000EBAB74B48E6C0CED83882B2F9DEB580EF2
-:103AD000CF73EE163D023C1FE97E98F29140DB2742
-:103AE0007DC3ED3E5685F521FB5CA1DD47FCBEE2C2
-:103AF000D70D828BD6AD9E57F9794F12DA57E5056F
-:103B00000B285F8C7E2ABDEBE3F6938E76B1CE6BED
-:103B1000198F7641CCBE98A69F62BFFDD7D6EF44E1
-:103B20006442BD303E1EF64F3E5AA78979CC467A94
-:103B3000AF8EEC4835CE9685B483E73E9AF1384592
-:103B4000FCFB93F9FBCCC1E36E262B98A4407FC20B
-:103B50007D56F2679A4C5087F3118CCC3C0A9E3FFD
-:103B6000ADF803D7084CC47A74BE30C3F9DA05DF68
-:103B7000668F134B6E4719527D946F8861DB587BBB
-:103B8000B40FF338A07DD5BDCE91E8CF1B01041151
-:103B9000417B5A8953A9FE9394FCFEA528BF5F2C54
-:103BA000F8688119E5333A9CAE676CFFCED35B822F
-:103BB0003951BA345DCC62728C5D63129B299FC30C
-:103BC0007471B4C6CF1256EC31B5EEB58BD5385FF3
-:103BD00004ED05CC5F625207BE5709409163FDA614
-:103BE000171D9A71A2E3E768E60D835D1D1B171888
-:103BF0007EFC242617C58E9F37CCF88571E34B09D0
-:103C0000C78F8E9BAE19779DC8F945D06E0D25F2F2
-:103C1000F39D2DA87A1B4979B87CB33305DC0F08D6
-:103C2000FC58A4389482378F389A29FF4C6FE5F1FD
-:103C30005283123F3998DCC0F32472B4F967554CB3
-:103C400012B17D5DCAACA302B457D9B47AFAF44B71
-:103C5000A7F5C877A68B5A3DDDCB9A093F6F62DA8C
-:103C6000E7861C2D1FD8A8D0872E796284F2D43223
-:103C70006C9477309C5FE1DD3646F95386245F33E0
-:103C8000CA3863E1A5B4750EA88FE0F8652F4C5DC6
-:103C9000887EA277153C5E07748F70AC5B3572BB73
-:103CA0003E66DC3A63B800E5489D8EE7EBD30FE64D
-:103CB0007F37238BFCACF1F352C66F8CDFABBE5960
-:103CC000F0B962F6F1AE421783F3ADCEDE8E7AEC38
-:103CD000E07CA6F0249A6F30EF47992FF38BCDF755
-:103CE0009E42CFEA7CF55FD5EEAFDE18A1FDD5EBA5
-:103CF0009892E7CFE77B0FF7E7FC02F329F95B83A4
-:103D0000F37D4DBBBF7A5384F6573F684F2AF36566
-:103D10007EB1F94CC6668ACF3C26F0739DBB6BD44E
-:103D2000E3E8A7BF3077958CF8A6DA67B7E00B8099
-:103D300067B728F94DB7E618496F50C7DDDD3685FE
-:103D4000798DDC9F8365D10D02E5FB8F9B22783155
-:103D50003EB60DE8DE5B88FE2A89DA436D0E2A77CF
-:103D6000B4C9547E17EC412FF9AD3C54FF1F85DCDC
-:103D7000CE7F6C94B46405EA0B95569EEF7CC334F9
-:103D8000D044A3F61618607D16CC2BFC322BDB0832
-:103D9000B5C2AD1C1EF6EACC109E93B5EC50A40D36
-:103DA000EAA6A97A19F3B84D4EE64BE48F692DE4E3
-:103DB0007E9E47D4FCF81B051E7F077DA412F6BF2C
-:103DC0004C0135D3CF1550AFBAF56BA9A48FD42DC4
-:103DD000EA4F96601D7708656FBB001EBF51F491D6
-:103DE00065A3391DC7DB9376942C13317F4F1F0ACF
-:103DF000C19F0B9317923DBA70316369F0FEADF825
-:103E00001EC895E38A3EF346BF89A1BD16ACE67194
-:103E1000E73B1ED6DA918F59C212EA718F95D919F4
-:103E20009E475D8BB6FD11258EB030CEAEBC352ED3
-:103E3000AF06B44C9E1F827B9ECAD80385DABC9A1B
-:103E40008A4299F3B91C3B2555A7CD768DC078A43D
-:103E5000C998F81E8E3ADE33AA5CB67B090E6A1E3C
-:103E60001AD3BF5846EF2BF3A9EF3D2DBC38EA4AD1
-:103E7000FE4ED0DB3EEC2FE2F219F5EB8D71EBBC80
-:103E80003037EF1BD52C11DE0E88E85750D7FFBF17
-:103E90000B5FABD1A70178747CC6A713290EC37240
-:103EA00068DFB7A8F8A3E4572D1CAC8B4C8CC9AFC6
-:103EB000638E01379EF75B3726793612FE29FA4367
-:103EC000F81DDDE5A4CF3FDEE03A1CDE5CEE8FABF3
-:103ED00096283F48196F3838C7E73FA87E1BFAC5B8
-:103EE000E41FB66FE7F98F59F6AA8FF19E143E3F93
-:103EF000ADC12BED7DA8F6DEE704B42FBE8DF7BB78
-:103F0000C4E87CE8BF0D92FEAABDA715BF2EF5FE42
-:103F10008DBA9E76232B227B5407FC01E69B67EB30
-:103F2000170519FDF10322C5CBC7723F11E608F34F
-:103F30007B2F5CCFD367EB783EC71899EB7DAE81C2
-:103F4000D1B1F1A28F0AB95C9F97F4668B0CF2EFA6
-:103F5000FDC2C042CC579A37E2CD1627D44F153652
-:103F60002FC47CA679D96F7EEA049DEDB7855FE109
-:103F7000F592373FCD83FAFF2A5CC5EBD31801E5F4
-:103F80007785AB17225FFDA85052FC97911C9C6F60
-:103F90009EC0F1E58B967A932E613CFF7CA1EA4F9F
-:103FA00064069CC7D7F3AF27911FF954FFAB571B8B
-:103FB0008764D89489F786949F3D85F49939F837BA
-:103FC000C0F36631DC8BEFEBCC6182EB58CCA329DC
-:103FD000221478E2F215F225E2F14800746D457D75
-:103FE0005996581DE8C7EDADCC6FC98FC173E65522
-:103FF000F09CE7F5A8EB51E71FB22E3852312D7631
-:104000005DDB681C755DE7CA4C41BC5FA6C655D533
-:10401000759D13069E4167C49C929D8BF15CCF25D4
-:104020000F8C16A0FEFCD8B7E99CCF650C3C23781A
-:1040300062EA067E8E23C73E4A7A4F8BE01D391610
-:10404000F9A5D146F7D83A153D6F53863FC8B87EDB
-:104050004FF98FC15C7E3FA07AA2E08D8DFB3BC7FC
-:10406000F2B8494829679A36379F007C0CEC15D87E
-:104070001AE81FB874C188F6F8BC9E5346B4BB9BBF
-:10408000F69E32A25DDD847518A7699B91F8553CB8
-:10409000BC778ED56BE2EBAA3D7138B7709D1DD60B
-:1040A000D3B442F060CAECAAFDA933B1BE6A39EEBE
-:1040B00092B1DB6FD83313D1A5DED7BB0ECB65AC85
-:1040C000FF30DE9F5BE2D7EAF94B1BB47A797DB310
-:1040D000569F5EB6194E07E4D7B2D66CCD7B0C3531
-:1040E0006458CF12E53C97381E8DE8C7633DE65E05
-:1040F0008E40644DFE9DA57C07506AFD16F37A0440
-:10410000A2E3A65A33F95F0FE7F27CFAC04A3DE515
-:104110000905101DB0DE2C28FE2C2FF147557ECF4F
-:10412000EC3E7F241BDF5F692038B0A037827EFD24
-:104130005A059F96D5D67C8C78562BDFC7E5F89824
-:104140005D06F2AFF8B93E2E2BFEEFBAEEC7AAD34A
-:1041500050FF6C11C8BFB1B441ABAFD7E31FA8BFCC
-:10416000B50AA1B013E1A46D5FD6AAADDF355691B3
-:104170006325AC04E9A461AC2012DD28F53FE6FE1E
-:10418000E28D304CF490E0BB7F2C1CD04A63783C2D
-:10419000CAB587043FD5D57678DEC4E50E97F73AE1
-:1041A000A028E2BB06EE5708360A848F4B87C8FF6B
-:1041B00018FD403FB4FECC582EDFDA2DBE16B29764
-:1041C0005E1524D447AA45AF98E68EDAB3F1F8F825
-:1041D000AC82DF6FB07E37AEAB10810EF02F5C3853
-:1041E0002284FEB0C29F2CA77CC7C20AC1A3237A37
-:1041F000D6B1D6722C45E20FA86F5AA02CD477D531
-:1042000012BF9E6094783EA183C5F201EF734CC04B
-:10421000BC3E5C3ACE7B73CED1CFF01C6FD9FAE8AE
-:1042200079E477AE7C6FF963B0BE4D163EFFA6FD14
-:1042300002E9AF4DEE23C41747029AE0BC4D0E854C
-:104240003F76037F54F70FE73D12F9155E1099EBA7
-:10425000A67947A9F10135DF365CA5BB0CE73752DB
-:10426000997767A94CFBCEBCAF4BC07DE7B2E01A93
-:10427000F413FDF3584670544BD58FBF381AC776E8
-:10428000E279363AFA8DA47F2B71EC04FD4A12F6DE
-:10429000F3328D1F61A6FE520AC69B57BD9A7FC599
-:1042A0007C0BBD59A7A1578364D5D0F5CD455A3AAB
-:1042B0009FE7D1D2F7AD53F235EDF3BD259AF685E0
-:1042C00035159AFA62DF344DFFDB6A6768ED7DC70A
-:1042D0001C4D7F8BBC40534F2ABA5DD33FD973A787
-:1042E00096DFD8BB28AFC0680EF6FB010E9D80ABF1
-:1042F00053D2A2FCBA24C58C49C7CC5A61B161D94A
-:1043000059660AE3B97566F138ABE9B5071C6184F3
-:10431000FA8817CD9550BE2084AA305E6456ECBC56
-:10432000E28799869F8F2DE178AE96EF8FF57F5CBF
-:1043300004A57BB79CCDF3A723C5783E66742022E5
-:104340001EEF3393DE31214EFFFD5E69E56F51AE06
-:10435000B81FF6CE26BF543793F0FEEC0E23CF7372
-:104360000AEEE3F9B4EEEE7E9D3786DE02455CDEB2
-:104370007FD35745794B4D3D20CD10BFB79E36A218
-:10438000DFAEA9A73705E5C678DF6923EAD7D1E70D
-:104390008A3C1107AC18BFFC97AEC4F969638A8CDC
-:1043A00034FE1185DFD63FC0F92D20DC5CB48F547C
-:1043B000FE59BF87EFAF7EB191E85BE5A3C03F3503
-:1043C000F1B078BEBCF486D03AA45DE0A31AFB65D8
-:1043D000D9A2591FA33DC45898F418E0A3DAF69C5B
-:1043E000F544DFCBE2EC9BE422E0A7A8479430F74A
-:1043F00065A097933E5DC27DB94BF8F7024EFA6710
-:1044000010BCBF097043BBF19B43E0C4E17735F8B2
-:10441000BCA4F813D5738AEF5756C2F9E84BC3F022
-:10442000CB078A78FB0E21528ECC2CE0B3129E2E45
-:10443000359B1763FEC191DC3FADC77842FD0F0489
-:10444000B465D9AF7B5FCBC47C04E39EC399982746
-:1044500011E83A9CC9004E2B0DF21AD48B010F3C87
-:104460006BE05C9ABAC3B4FEC6AE8A5E7CDED82D21
-:1044700078901506F69E9F45FB64FDEB518FDF316A
-:10448000CCBAA615717D785691CCF398FD3027CA29
-:10449000D9BD26B263EBF7001FC275ED17E85EC603
-:1044A0008E0DE6DA44FAC9648437C0E9D00623C326
-:1044B00038CA4A781FF77124F788D18C78B347201F
-:1044C0009B30D0756231FAE3032D0686715B757DF2
-:1044D000677223EFE3FEDF596160788FB07D058F4F
-:1044E000C7BED3A2A771F4771BA8BEE45E9E377C3B
-:1044F00070C56FD767C3B8EFAC1428DF7EC6DDFF89
-:104500007604EB4BEEE57A503CFE0EE26B1C7E2E01
-:10451000F16BF16E089E367C313CBD338AA7E351C6
-:10452000CEC2B9CF1C89F8F320A37B8CB5970E1AA5
-:1045300046C27AF3D64B1E0CED96EA43EB32912F2E
-:104540001CE4ED652BB70B9CBFC874BF3DBBD3C843
-:10455000D06E7C4039AF0794F392D98080F96E4CCD
-:104560008CE4E1FA9C4A7ED7CB0656BB07FD482275
-:10457000E72FA53F746C8FF523B914BEA2F2BD12CC
-:10458000B0F7F7901FBA2B0BEF9DBF64E0FEB1D1DF
-:10459000CA7805F903B3E643F9CD22CE07DB94755B
-:1045A000A875AF82FFCCBE83E03BCFCCE13EA73500
-:1045B0005C87FBB847F4AF2B82F6B9A37FB1925169
-:1045C0007EE4EB6E3FF9B98A49AE0594F33838F5CD
-:1045D00077DB56631EDE382B9DE3FCBEA72278AE48
-:1045E0004D2E91F20F2D051347FAAFE047085C946A
-:1045F00035F7F89A7ACECFF226A0EB69CA7A4B95B6
-:10460000FB7AAC87FB0F801F8B53CAA3FDD4FDAB95
-:104610007E0F4BC177E99C567F8595F17BFC8FD14E
-:10462000FE97AE3C21E03D95DB0C5E830DE0FC8BFC
-:10463000116C31DAC1AFB731BAB7760CEFAF012BDD
-:1046400079A34DA27A44B9C7F6669B4CE56D46DF67
-:104650006E84CFE243CD0508AF83B94FFAF0BB0CAF
-:10466000E78E29FA2C93F8BD4605F72EF4E8991940
-:10467000DA2FEC1542E43451D67FC7C52CE6077E0D
-:10468000F22BE5BE5C63EBCF89CF791ACECF423BEC
-:10469000A36CE5A9F5580FB4FEDB2CD41BDE07395B
-:1046A00081F815E8169803C6A9BB9846EF37769FA0
-:1046B00030A23DFF926E6016C23F7840A07B5681CB
-:1046C000E6F3C43FB729FE958F8A781C31D053A6F4
-:1046D000A3F3F41673FB4439FFDEE27F4F41FE651E
-:1046E0006E958F4FC3733CAAA773DC583590222573
-:1046F000389793302EE68FFC4AC9D38B6FAF3506BF
-:10470000C92F5BABE06D7CFB070A3E02840D4A9E1D
-:104710001213603D750A7ED5E3F761D250CF17C200
-:1047200056A0DBFA9E19E4DFA86FBEF2F75E86C3DF
-:10473000B76B2D9B18F76FA875B4BF62F3B8D0FEA6
-:10474000D2DE4B0FD23E4CB9AE91FE2BE87781FE04
-:104750002C8A9F3475328A97345E2CA6F2ECFE4781
-:10476000E81E94D93AF024CA0556A823BDBE31A844
-:10477000D56F8E17733A385ECCE9F95211D8276697
-:1047800036689F801D7219F112EC90943EA6B14FCD
-:10479000E29F937D6256FC86A02EF95F4EB0EEB785
-:1047A0008AABC4711948579B09BF19E037E255FC21
-:1047B0003E478CE3EB52E97949DFC746D47703DD06
-:1047C00089E9F937C5952370DC0DC3E4E5BD5DCCFF
-:1047D000F95DE35646F00A6C4D23389D615B7D55CB
-:1047E000809767601D784FFD9CCF97940AEF9FF3E9
-:1047F000FB92303EA7D27FD3562BBDB7C1B5201D4B
-:10480000BFABE11AC7BFEB73B67B8619E17CC75615
-:104810004E77EA7CEF8797A423FD4C320C18D13FEA
-:1048200099D3732A05F5BA49FB17A623FD0DB74E98
-:10483000BB721E8DAD598BE91E10FCF440F7F72BAF
-:10484000722CB0366C44F8DFDFCA087F7BF7FDBA04
-:1048500009E9F76C4F928472F2CCAB4941E4F7E777
-:104860000E98423A186AA5F23DA43386FE5B487F53
-:10487000DCAFA77C85C0813F3C89F418D867A27B58
-:1048800035F7F73C721EE5DCCA9ED91F8B58BEF87F
-:10489000F7A587C6D6D18B63F38EFFD0B63B0BF955
-:1048A000E75991F389FBBB5F217DF6FE4B17C66389
-:1048B000FEE09957FF6332F2B3C04F2E4C463E16CE
-:1048C000F8F185C9D81EF861527322FD646609FFAC
-:1048D000CE862A1F9D6F891A3FCB39053F9C1D9BB1
-:1048E0006BF0BB05934E2CA23880DA3EA940E7C39B
-:1048F000FE93DEAE4EBF3BE6BD8E8848F912134FE5
-:104900005427AD88C1CB0F8A0DAA9FEEDAFC234A4B
-:104910001E82EA1FD91011F93DBB067D08F37B9773
-:104920004678FC3DDE6FC298EFE6523CEF7B333CAD
-:10493000F8BD1EBCA78E7191730F1684E89E7AD0C5
-:104940007CD815A3072D89E8C226F483F498C2A861
-:104950000F2D8988A74C317E91F7A597D7A11ABF53
-:10496000C4AFF563C4FB41E0972CC6C44FEA5BC2F9
-:1049700006554ECD83F97FB18E4918B719E21FA9AC
-:10498000FD12F961E2FD2472E40933BE27BBF8F79A
-:1049900075543D13CF6B6F027AB72974A2D2514779
-:1049A0004447E7D011A932BBA03428ED7B416C0607
-:1049B000312FA867E14EB4D33B2EDD9684F0EA7820
-:1049C0006B01C3EF479C93AACC05F8DEA52F99177E
-:1049D000BBA3F831847F8CE37265501F1846CE1D4F
-:1049E00051F8D6DF4BDEF58DFBEF21EFC0AE7E6DCB
-:1049F0001CB7AB9772BF07B7ABE3E584CA7FD5712D
-:104A00003F53E03D94FF7E4CFA0BD8BFC47F3F1B61
-:104A100027F3EF34F4CC4F27BBF8AD45E9B26DE88E
-:104A2000F8F9A24797E61E3ABEAAAF0582DEC36632
-:104A3000B463BC3CFF34B048A0EF48057C02E9D920
-:104A4000813A4308DBD5F54416F1B8E0628F40DFC8
-:104A50000551F53F553F1C6C9F08EDCEA8BEA8EA56
-:104A600085111FF78B2EF21AA8FD36A37F60DC2478
-:104A7000DC9F859E4F9ACAC7053E7018FD9FB77D83
-:104A800059A0EF76A9FAA28A9FF1FAE4273DF957D7
-:104A9000FC1EDD36052F55FA1A1D4717AA9C7229F0
-:104AA000F06942399D8E72FA3363BF6D78BD1BE4A5
-:104AB000B4584CEF31C2DB896F8BBE4476F7B7C672
-:104AC000717E6C2F56CE2D72A812D79BCB229417D5
-:104AD000359CFCFCB498D3C370EDAE715CCFB91AB1
-:104AE0001D4F2FFEFBD2F1B4E2FF1E743CA8FF194C
-:104AF00013EFF3ADE2CA6A3C7FABBE99EE4DB19FB6
-:104B00001AC86F1DDFEF3305FE20CF34787C38D70D
-:104B1000A843BB27D0C0EDFECE54F938D927AFF15A
-:104B20007BF8F72BF94AF75D94A8ECC40F8561FB7D
-:104B3000034EF2DBDCB7FB84C10BEF2F6D11CAD043
-:104B40001FB4B441BB9FCE0CEFEC583F78E7A82EC2
-:104B50008A2B0477E6CB387E3D6E16FD219D5921C8
-:104B60008C3D36A11F67023E8FB98701F3342ACFEF
-:104B7000A729FE1D16A707FCB8F71DF2F7605C0811
-:104B8000E9D7D823505E48E028F77734F570BEF0B7
-:104B9000518340FCE423253F23D06A21FFB6AA4776
-:104BA0007CACF4BBF74181F4BD217A85571B776952
-:104BB000FCEEDBC417E3F588B4BD7C1C8CB7A05FAA
-:104BC000E670EE6401EB8D60178E447D51966FCDDB
-:104BD000E6EB6321E22F5E8D1FE593A3BF253B72B9
-:104BE000E97E81A593DE11177FE99C13177F397247
-:104BF000381BC751F40C09FE0FFD87F17A4653F7B5
-:104C00000903DA05578BB36C2ED6FA05C788DCCFBB
-:104C10003AA64790D09F344681D3751BAC04A75960
-:104C2000EFAD48473A57CFE7EC7C7E5E67DFF9B4DB
-:104C300012DF9BFC9E2821BFFDF13B2D3FCFE67587
-:104C4000D92CE37B2D4968879C7D6F5512C2F1C733
-:104C500050E2F7927E78524CE83FFC6BF1A0DF788F
-:104C60006731CAB78715BFB108F22D39EA7F897F4E
-:104C70002FA784F3A94EFC8E11E2DF7E1EDFEE1C0F
-:104C8000E59F43F5A7F2781EB1C8F1F5959E54094A
-:104C9000F5BD12D82CC661BF6F651D185FE9CCF059
-:104CA000BF4EF4F1948EF017DEE7DFA1D82393BC5A
-:104CB000C3D014C63FC683AC31535EA39DE220EA45
-:104CC000776246811DAA7C576111C65D4B9438C836
-:104CD000782B1371FC4D06FFC6711877E9153D6BF3
-:104CE000F01DD1938EDF458A8FC7A8F161352EA3C1
-:104CF000C689878BCB0838CF788E67B1DF3D51E30B
-:104D00002FECCB3C7FB37D4A33DD8BDD8E3112E25D
-:104D10009F43E2297F463B353E9E22A2FCA1388D6F
-:104D2000369EB6B1E865C2B7CF1B479B5E3CDCFC44
-:104D300032B7E7E2E69F98FA4926D92F7FF9730A3E
-:104D4000C9B39E0B2477CE0D9894FB9DFDDC4FDDFF
-:104D500063207BFD1CD8411931F26CF9380E87BEF7
-:104D60009E19848F7B23D549D8BF53D17336BCB5E8
-:104D70006821EAD3C188C8F3B119B76BF646C449B4
-:104D80005C3F180227A93841DCC96C4D9C071456BA
-:104D9000FC056165DF33DEE1F64AA085C70F248597
-:104DA000DE023546E22747723305D58F3C32517C0F
-:104DB00061FF00F1D9FA7B797CF79AE30BDDBD0640
-:104DC0009697C06F5B338BF8CDB5FA6B195AC193C8
-:104DD000A3FC39AB44E127A58AFFB698E7F3A735D2
-:104DE0009755E2F7EFC2C39EB77F634982F34ED077
-:104DF0006FABFBDAE281BFBEC6B8616AD1B5F51B05
-:104E000093881E12F49B7E8DE37DF31AFBB55DE360
-:104E1000BC0BC725EAF7FF68FC333EBE191F0F8D98
-:104E20008F739A5EBB3B886D8F088F0E8411BA29F1
-:104E3000FB6A05205531F5BB66E46B73A7F278C0B9
-:104E4000866A7368BB108D8BAAF00A9672BD4B728E
-:104E50009F0FE27712477B23D5E940C7E7A632B21E
-:104E60001BCE5994EF2389D2A8F9747E127D1FA717
-:104E7000D39238BE3451196F383EF2BDD2CAF548CC
-:104E80002FD230DFAFC82DE17680D4CDC85FC344C8
-:104E900079D4029A571E45DFDF3BC49FA78419E5EA
-:104EA000F741BB7301E9CFB213D7B745897BA5CDD5
-:104EB0002974A29F2E0DE42DC6451EC3F808F9F5EE
-:104EC00025EAA7CE97ECE6F36D313001E358C171C6
-:104ED0003CAF82757C5F13D73866087FB05CA0B8A2
-:104EE000C6765CFFCF7461F70E273F1784AF7BAFA8
-:104EF00044F19637A67EAF88EECB2B718ED512EF9C
-:104F00007210ED0C58C7EA572B087F97F64DFD65D8
-:104F10001DEA832E91E03C440F57ECAB938A7DA8A9
-:104F2000DA57FD6827C6D81B3F50F4860474F58312
-:104F3000447C698BC0EDDFE0CFB8FD5B61F4E4C772
-:104F4000E653F52A7192E561EE8755EDDAF1DE90D0
-:104F50002E13E050F1A03E6C02395DB1BED488FC46
-:104F6000BA627DAE95FC4A2BF6E85478273AF79F53
-:104F70002AEBDC707480E212AFC4C52793DD466A69
-:104F80007F48C19F643C5B28571788ED287E47DC2B
-:104F900020E913F9C5EB41EFC7F52DEFE4EB55E33D
-:104FA00020F5617906CE73EAF0C07A2CCB1B9C33D6
-:104FB000C86FB8F2FC7A949B814B178E4C273F80C8
-:104FC000514E745F604B29F71FBE828A08C26BB6D0
-:104FD0004879BB15B3453AEFB47A0BD9E16906A617
-:104FE000C7EFB0A6CDE772ACBCC63E03EB6C512A4E
-:104FF000C9E1F2A372EADDEEA89D9F36BB2503E16D
-:1050000074B5F890EA2FB8CDE8FD6349C6E78F0F75
-:10501000351E7B8BF2CCEEE8D7C687D478CF70F103
-:1050200021353E1BA8F954134F0E8803B3D0AF525D
-:10503000F1EA298A0F07BA05C9E18CC68D027BCF38
-:105040001B09BE4ABC08FA1BF1BD0A38F65169F8C3
-:105050001D021E3FDA87F9B846FCBE9E4479B73F71
-:10506000C27CDC42FCBE1ECFC73D80F9B846BCFF07
-:10507000C1F371FB94FCDE40CF798A37A5B987E490
-:1050800053513CE221C197E19EA48957503D3E5EB9
-:10509000A1B7723B3470D440DF3F0F1C33139FAD78
-:1050A000EC593E06F531F5BBE44D182F88F12F9DE4
-:1050B000F57A2C78BFE7ACCF63C1384145EFC746DE
-:1050C00099F84E381B53989AC48811ED7D8403E5F6
-:1050D000F9F5545A10AE57F5EB77FF7FBFFEE7F1B5
-:1050E000EB7F2B4A97C43FCA7D3ABA575E7ED46B9A
-:1050F000B93B863F6CF071FFF006571ED1DF13BE3F
-:10510000BCD415B17EFC1A6EBFA5CD7659629FBF87
-:105110005BCAFDF86942E2FB0577B987E5B777B965
-:1051200013EA3B89E3011B6A381F51FDFD43E3038A
-:105130009ED75C317EFEB33F33D3BFAFD0BBDF44DD
-:10514000F2FC4FAF9A76A0DE5D5EB3624C32D4CBF8
-:105150004F9A9893CB234D5C61698DCE6B4949146E
-:1051600047F066D3F743E3E305353AE2EF83F18294
-:105170001AF114D515FDFC8EF3BF4BC64F94BE2219
-:10518000843AD1BE78A551F0F4B2A1F10318389B4E
-:105190004D815DD4703BC1536B26BBE06A7185BA0B
-:1051A000BD27D6A19FA08C6DEEC4EF5196B97412A5
-:1051B00088A20471059EDF59AEE811F1FE01C40F0B
-:1051C00094FBF17EC1AD6E6E9F6F55E47E5E0997D4
-:1051D00033EA38EA7BF1E77EC6AD8D3FC4B7BFA79F
-:1051E000B477D4946FC0730BCED531E4FF1D355521
-:1051F0006657CC782FB879DECC168C53D863E3147D
-:105200003C1E111F9F50F95345EF67B3F0DC9FE838
-:10521000E1FEA38083FB332B0E54D23D93E83A3951
-:105220007E3EE118BC6798CAF8BE9899FBB9C8AF32
-:10523000503EF7D33EFCF707982F95FE3D83C031D3
-:1052400057BB0DF9C85C719220937F7BD0DF8DFE38
-:10525000A885C71BE6603E70C5E2B213782E8BEBC3
-:105260000C9477B4F0782D7D675C9557158BB7AFAC
-:10527000B5627B91E0B1C8D85E5385ED37BF184663
-:10528000CF1E9B87BB077A891C83DE79E4DFFE296A
-:10529000DA4515F315BF771D97AB8B7BE61BF847F7
-:1052A000AFB472EE60EE9FC86EBED05341FEEC7498
-:1052B0008CB7BAA372A6E255903FC951F9F3B7CAA9
-:1052C0009D336E9EE73F01E40FAE276D3E8F0BC608
-:1052D0009FFF0B0A3E0D274F86E39F283F745338EC
-:1052E000BD088EA8DC95D19EBE2E2A7FA56EA88F04
-:1052F0001C1EFFF215BC4E1D46FF1A5D2A28DF1B3F
-:105300001B265FA3FBEFE3F7CE2A55F9E7FFE57E07
-:105310006FC5BE51FDDFAA3DD4A2C0592D1F50F468
-:10532000D9BF395F198562C27CE5B4C4F9CA777404
-:1053300009F41D16255FF9B09155EEB1639E9E727A
-:105340002F21E423FDE6F0D3BF5AFF9C1DEF250873
-:10535000128A9DC6AE13249F1B419F213DA8E70FD3
-:10536000DC2FD5C5F34B1BBBB5F71FD4725B29BF30
-:10537000AF500DFB213FB292C7376B2FA7EB80D701
-:1053800018929DE817FAAA18EB170AC8910C353F36
-:1053900030C4E552C23CBE263640F97E4D0D820730
-:1053A000E5C117F61379797EDFB5FA89EA4BB57E48
-:1053B000E6B525DC2F54EB1704D447CD3ADF4ACAB3
-:1053C000EF3D204889F244572BF87EB3E2A7DD6514
-:1053D000E478B0EB7A81F26AF15E0C9EEFAE033CAA
-:1053E0007F7E5739CF9F57FDB26A5EFCB8A85F96A3
-:1053F000EEC3A8F9F46A7EBC7A3F74FE566B18F5CA
-:105400008B4D862E07D2A19A57E42AE572CEAA7C4C
-:10541000773C7E9DCB4A2B5DA518A72BD50DE7E7E2
-:105420006A2B4DA0DFBCAEC8CF75A5C3EAE59DA52C
-:105430005ABD9CEAF17AF97F955F76CCF07EE15F08
-:10544000975C9BDFEA96C47ADC907E95A509C66BD3
-:10545000B724FE8EE8EF54FE1BF7EF8FB021F77BE9
-:10546000B87CEB14E45F4EA3389781E25C2A7FE9B5
-:105470004CE6E3EF53F88A5A9E50C61FEE7B93EF3B
-:105480002AFD5A04EF0F70DD25BBB57EB2D22EADDA
-:105490009F6C42779AA65E16CED2F4AF389AA7696F
-:1054A0009F1429D6B45F77B25C539FDA7FBDA6FF05
-:1054B000B48FAA34F51B07B47EB2E91717C4DD3BDD
-:1054C000E2F85D091811FBDE0CF35D9A7ED90DDA66
-:1054D0007DE5366BF735A655BB2F755C6750BBBFB6
-:1054E000FC4EEDFED2D07FEFFEE2FEFBDBDD32CDE7
-:1054F000D3D7934FDF03DC52E3A2EF5EABF7FFFE9F
-:105500001307AFFB52406F000000000000000000D6
-:105510001F8B080000000000000B53E16760F8518A
-:105520000FC15BF918182EF021F8F4C01CCC0C0C3C
-:105530009C40ACC8C8C02001C4FC40CC06C49E0C32
-:105540000C0CFF81F81B10BF05E22740EC0CC407D0
-:1055500058B09BE3C6CAC0E001C4DC40B378988968
-:10556000B7DF8917C17ECCC3C0700E889FF1D037DA
-:105570000C061B5E27403FBB7E43ED3A2932F0FE0E
-:1055800006612131609A1447F0A78AA3CA0B8B21C8
-:10559000D8C9D294D9950FD40F00F19321F080038C
-:1055A00000000000000000001F8B08000000000049
-:1055B000000BED7D0B7C94C5B5F87CBBDFBE92DDA6
-:1055C000CD26E44900370960501E4B80C84BDDF002
-:1055D0003252C40411828A2CAF10027914A9A5FF9B
-:1055E000DABB0B2804AADE5851A37F6A17041B2DCF
-:1055F000DA80D11B6DE02EA208D56A684551AB0D4B
-:10560000888808498C8F6AB57ACF3933DF66E7CB53
-:105610002E89B6FE6FFFBF7BC3AF1DE79B99336733
-:10562000CE3973E6CC9999B32696C20C9733F60D12
-:10563000FE416A3331C6C674A5ED4AC77035A7ABC3
-:10564000FC36BF9779CD8CD5F9AD946EF1A733EFC9
-:1056500060F8EE331406ED8CDDEB7751FE17FE4259
-:105660004A6BFD4554EF4E7F09E56FF7FB28DDECF3
-:105670002FA3EF35FE6ACA6FF0AFA17493BA280D5D
-:105680005082BFA2C2AC64C6AA9EC9C9DB0CB92DA8
-:10569000B3C627A8A321FF8A9119B300BE4FA5FE68
-:1056A00098EADE347074573D0DCF4DEAA47E08A70A
-:1056B0007609C78B59992D46BD2C1CE79D4B043CA0
-:1056C0007B6B4D4E72D47A8311DEED25006F28146A
-:1056D000B842D69CE8F02E46789B4B545E2F395842
-:1056E000931D1D9E07EBD5DC20E0A507AC31EA8DAC
-:1056F000C17A1B6E10F8F5F3D56445EF773CD6639D
-:105700002EF56FAD56467FDF64E3FFDB5DA72E16F7
-:1057100079236693181BD7D54E9F321660384E9565
-:10572000F90A890FEECCAFBFC967EC268409ED03F7
-:105730009358C808FD079258707D96547F26D56F00
-:10574000EDFBF537A952FD80214A7D136B50B0FC6B
-:10575000E72847C0F7FBFCB9946E14F273DF5003DF
-:1057600063D82EDD1C1C04EDEEF17B485EEEF68F57
-:10577000A5F2BB841CFEBB90B3A090B30751CE2012
-:10578000DD8A7266C6FE7CADA500A77D6F3CDBECB2
-:1057900026F95A4C78AA8CE06FD83B64FB66807F70
-:1057A000DF0DAB4E6F03FAB7350FF318A1DE3D43A3
-:1057B00035F9625E96DC55EF9ED9279C8B8612BD2B
-:1057C000CB10CEDD1EC13F15061651EFEE19E17A62
-:1057D0001558EF2E4F185E28B2DFBBA684EBAD2222
-:1057E0003E2BACA4C1DE9D2F3B9842F3110485E80B
-:1057F0006B42FAC2BC7C76C0754A2BB44F49CE4B83
-:1058000063D0EE7E9C8F669C776EA28BD61EE9ECF1
-:1058100083EF1916568DF081B2FB8D80AF69B63BD0
-:1058200011E972FBB5454C19C6585F519E1A2852B2
-:10583000B200AE7D4E9182DF4DB3A11CBEBB447958
-:10584000F21A5E7E3B963BBACA13B11CBE27554383
-:1058500039E4ED7379F91D7EE0C4E0AE7A9B80CF28
-:105860003EE2773AFF0E6C45FA9846F354C3FB09C3
-:105870001412A0DF414CC774E1BF69D0BD190BED14
-:105880005DF8DA06D7535EC36FD3E038CA6BF8D839
-:105890002EEC97B110D2BE4BFA326FAE980FAC3BE4
-:1058A0009D13BDD95279A6EA4950814E992F1959B5
-:1058B00000589009E289F0F4ED8A9881F0EC71FECD
-:1058C00025F76EFE9986CA74D0D2A3821E1A1D36A1
-:1058D000F697E9601920D361E300990E960BCE4F3D
-:1058E000871DCC4D748E450FADDFCD43E47EE32E96
-:1058F00092FBDD7C91DC6FDCC5FF9C7E6BB2E47EAD
-:10590000ADD972BF35D972BFD69C7FAC5FA67A6025
-:1059100032A0BED2FE2E94F4DBD5CC7716DBA39E4C
-:10592000C3F9A4E93953B28FF9EC5DFC84758AB1EF
-:10593000FC48388325BD0A703EC57A00C77B7E3897
-:105940002E1D9C417A385F0B7C58A49EEE06870D75
-:10595000D48FC3A4F076214344FF4CF5B1224764B1
-:105960003B8FAEFF1C7DFF4E458CC370DEFEDD3AE3
-:10597000BA66EBF14913F830C3F9E8C15C3A38591B
-:105980007A386E814F48392F1CB77E1C178AFE0368
-:105990008AB47E013D8675B56B07FC689DCAB30469
-:1059A00077827E08EDFBF214AE03E71AAF755BA0B9
-:1059B000FEFE9196D0E5507E2E5810B440F9E427B3
-:1059C0008F3AD18EA978D2A862B9619F8DD697B649
-:1059D0001D0A9557595AEE9C00E51D4F1AD976EAD3
-:1059E0002ED380E33B25740A0BF17CA98D672BB67F
-:1059F000EDBF11DB973559980DE0553CBD6CE604C1
-:105A0000C82F3B646258A562E75A735FC82F0F2AFC
-:105A10000D98077C699D0AE4D9823BA1FEBA7D5F9F
-:105A2000B621FEE71A4D83109F33B04EB8619D78C2
-:105A3000C9D1923A1BE8531EDC3D0DDB97EF523C77
-:105A4000A0E100FF9D073310FF47148F0558B8A24F
-:105A50003E9EB923E6CBA946238D77D53625C800CF
-:105A6000DE32563B0DE95981C4413C3C96A04DE9DC
-:105A70009A6F67FC75D49F96AF7804FA83F6958F7A
-:105A80002B1E1C72A581F9701EB73D6D2B79C88E37
-:105A9000E35D6B1EECC0716E3463BD65C1854FD98B
-:105AA000DC88E736F334C477EB3673E950A4235B24
-:105AB000503414F1FBBF327E75462F8E77D548CB1C
-:105AC0007623E0C1ECA181B31CDDF5EC1958AFDC05
-:105AD00011EB673903BD4FEB77D05C3CACEBFB9728
-:105AE0008644D21F2BEA8DCC6DEDEA47938FC0110F
-:105AF000211F7B1D446F8D9FAB5C7C0A68FC5C950D
-:105B000028F8AB76E4CF1AD61D9F3B912F644FBB8C
-:105B100028FD05AC9B986E81751EE9772FD84F6ED6
-:105B2000B2CB3DF4FD01B09330DD0A7612A60F82B0
-:105B30009DE4167612D6DB0E7612A63BC04EC2EF5F
-:105B40000F833D8E693DD8E3F8FD51B0C731DDE5E7
-:105B50000FD0F7C7FD359436F86B29DD837C83B40D
-:105B6000D11FA47A4FF9EB296DF237D0F767FC4DBE
-:105B700094DE2EE8E89CC80A701D757A990BC99EC0
-:105B800034C35B60827C5211CFA7DE102830433EC5
-:105B9000D50779A04BDF95A1020BE4FB56F3F20188
-:105BA000B7B04956C80F08F0F2ECDBBD936C90CF4C
-:105BB000AEE5E583B70626C5417E7090975FB42BAE
-:105BC00034291EF21735F0F2E1CD6CB21DF2C34359
-:105BD0003C9FF79277B203F2792D3C9FFFE7C064B8
-:105BE00027E4F35B79FBF16783467794F5778FC9F8
-:105BF000BD1855CE01E56DAF9A0179B3FB265489E6
-:105C0000479553946F3479A9FC7DA5DDABC23ADF8B
-:105C100068F652F917CAE7947FCAE4A3F278835270
-:105C20004079B38FCAFB1BE228DF640A50F90843AE
-:105C30001F9E3707A8BCC0D0AF00E13F630A52F9EE
-:105C40003586413C6F0E52F92FD4E10553A0FEE397
-:105C500006DF5ED477EB155F19DA874C6D48477D18
-:105C6000A5D9953B717068676698691EECF943FE8B
-:105C700043340FF02F19F3A50FA35D0A700E121C09
-:105C800013C031F60C27EFE5B1129CBC97CB34382A
-:105C9000AF101C5BEFE0EC7979BC8CCFCBE51A9CA4
-:105CA0006304C7D1BB71E5BD3251C6E795951A9C17
-:105CB000E30427B177F8341E95E9D378344C9F3349
-:105CC000B83EAC4FE91D3EA35F93E933FAB5307D92
-:105CD0003E267C327A07A7F135993E8DAF85E9F3F0
-:105CE00015C1E9DFBB718D7E5DA6CFE8D7C3F43166
-:105CF00019104E56EFE03CF5B64C9FA7DE0ED3C709
-:105D00006940FA0CEADDB8F2DF91E993FF4E983E64
-:105D10006984CF90DEC179EA1D993E4FBD13A68FED
-:105D20009BF019D6BB71E5FF45A64FFE5FC2F41983
-:105D3000427046F60E9FA6F764FA34BD17A64F1EB2
-:105D4000C119D33B7CC69E92E933F654983E1308A2
-:105D5000CEB8DEC1693A25D3A7E954983E5388CE20
-:105D600097F66E5C63DF97E933F6FD307DAE22383F
-:105D700005BE7AC287011C476C38CF9C93E9F3CCEF
-:105D8000B9307DE6109CA90027A76738E3DB64FAE9
-:105D90008C6F0BD36701C1B9B277709E6993E9F339
-:105DA0004C5B983E6544E7AB7A37AEF1ED327DC689
-:105DB000B773FA54593C931D68DF2532CF76687269
-:105DC000C9C986034EC89BECCC83605F52423B102E
-:105DD0003EAC956417AA1ECD4EF130B4436738DD52
-:105DE0001EF4FB18357B84B5D07EC1BE2B51F20763
-:105DF0007D6998740BE2EB00AB2DD22E49181B275E
-:105E0000D94389DE2429DFA7B0AF543FA5285B2AF8
-:105E10004F2BB9482ACFF0E549F9CCB2F152FDFE3B
-:105E2000D593A4FC056BA64BF5B302B3A47C4ECD71
-:105E30007552FD41B58BA4F20BEBCAA5F221C155F9
-:105E400052FEE2FAFF23D51FD6B04E2A1FD1B45915
-:105E50002A1F19FA85941F75E801A9FE9896ED523C
-:105E6000F925C71E95CAC7B5EE91F2134E3FA3B3ED
-:105E700003E5FDFFFA02C6EDC10C33D983218799F2
-:105E8000F2E67D36B2FFF7631EF869EE3B83F2E679
-:105E90006717BB93713F8D0060BD2FE85B7621FAD9
-:105EA0007B6E1EEFBBD005DF6F36FB46B8A2F82332
-:105EB0003CAA6F9F81FC452D0A4BC7D46DC034CEE0
-:105EC00028F6EB162E5F1BB3F21F0A44C8694D7FFC
-:105ED000987F903F6C3093FDAAC9F7C6FEA5E90BE9
-:105EE00023FAD9D0DF5CB27D28FFBED88EFD15BD68
-:105EF00088F3ACCADC3118F1D2F763C91E2BF56305
-:105F00001D5046FDBC86FD44F8BD2C03CA74FD58E7
-:105F10004BB68BEFA29F6338AE58FD6CCC1E2F8F13
-:105F2000674039F5F3AEAE9F8D03CA75FDC4F1F13C
-:105F3000C077D1CF7BE71D4FCE44793C17ACA47E10
-:105F40003A7474B35CB052D78F9DFAC1EF8BC99F7E
-:105F50000BBB8034E0B3A5A394E4E03F6D2C00724A
-:105F600061CE2CFF35E6D95B363608FB7143BF5056
-:105F70008FE572FFD1D386241ACF6771C0FF083B2B
-:105F8000B56B3F1BA07DF15281220B0246B0BFAD25
-:105F900014B2B96457F1809BDC90361D187837F63F
-:105FA000B3C5E11904F9B6A6C9E6C551E46969ADFE
-:105FB000E9546BA45F44DBDF4C62B9D5D0FF2E9B64
-:105FC0004BCA6BE94AC5C5843F82F22760DFC260D5
-:105FD0003FF067D8173020D5BB26BE4F7B07F6377A
-:105FE000986F85FD0D9633B696DA9D107EDA13B75D
-:105FF0002B41A4F7673FF9A189F47880BD9A9E8A66
-:106000007E37FEB7604D3CFAF8C3F82D0CF491F2E0
-:10601000A02E330DE9B42FA4FD6FC7D396E076A46C
-:106020006B4D26D054D4CB66EC75D8E4662451363B
-:10603000D33096B1D9D5C553D3681629FD57019EE3
-:10604000B31A479AA0056B33B5DEE8B177C1655E38
-:10605000D309A48F15FE219C6B0A211FD1FFB545E2
-:10606000727E2E53BBF2C0EFC1C66CC137D1AFDB1D
-:106070006B42BE16A5727CE6629A87C5DCDF51E2F0
-:10608000E26D357CAA169B5888F6A7811486FEE837
-:106090004032D5BB4EDB67EAF02B3159BD4540D7C6
-:1060A000928546A2AB1EDF37F7C57B0DC321ADB984
-:1060B000DB84AECD9EF09FE793CB5919EF4FA3AB96
-:1060C000262FA7047F4F20FF217D1FF90F789F14F3
-:1060D000FCEF9263CEFF2A8B6F26F2BFE37E232371
-:1060E0007E09BECF117C5F5A2BF37D0EFAC9A1FE4B
-:1060F0009CD559C1F558BFAE8FC45F18B84C87DA2C
-:10610000BBA6825AED86FFDB420EAEABD9FD3CB298
-:10611000F7FA32DDF8041F6E147C98AFA3C71CC1D8
-:10612000B7F9826FCB58E0B60CF21F054DE8179B0C
-:1061300057A630D417553FD5F8D62AF1CDA7F14D43
-:1061400087EF8D826F37FE84F34D8F77ABE05B6B0B
-:10615000DDC72696DD1D6F3D9E0BD6E8C615D0F334
-:10616000AD569C3BB8CC68EF147B0BFA9C8CA87F97
-:106170004DE1957D4E46E8856B8B8AA5FCDC9279D6
-:1061800052FD79BE8552F9F565CBA5F2F9D53F945C
-:10619000F20BD6FC44AABF30B0562A5F5CB3492A42
-:1061A0005F5A7B97945F5677BF547F79709B54BE3C
-:1061B000A2FE11A9BCA261B794AF6A7A5AAA6FD89D
-:1061C00037E46A94AF978E1A19FACB3EF5BC4FFEAE
-:1061D000BA4F3D260FD6A944991B87F2EC26793E8B
-:1061E000E5CFA5F4B4DF43F27EC63F96D2B6A60350
-:1061F00076F43F56C581DE4F043BDCF8E6DA9A7E42
-:10620000B8DE40FBF18C351B5BD706207F000FA367
-:1062100060DECCA833B3D02806D2DD372CCF1DC624
-:1062200088F2D61ECAEB5416EAD3BD7C466BF4EF57
-:10623000ED4AC7E00CF413BE61613B23FC75DDCF72
-:106240002B5826DA15B1CACF1A5859E479D6492302
-:106250003F27711A279D3442BAD2CCE7FFCA3D19B5
-:10626000939813F3A1C1D551FC2EE1FE1A00993485
-:10627000E4738E34EF97D55DDC35CF19F6934D720C
-:10628000BB3C384AFABEA27E82D42E57F1BD6B8445
-:106290007A67F71B69BD66A10303AE1986F8794FCB
-:1062A000E277D6944276578BDFDBE7E440C6FEE820
-:1062B0002FA4F4557F11A5AFF94B283DE6F751FA0D
-:1062C000A6BF8CD23FFBAB297DC7BF86D2567F804D
-:1062D000D213FE1A4A4FFA6B293DE5AFA3F4B43F3F
-:1062E00048E9197F3DA567FD0D94B6F99B28D5F4C3
-:1062F000674FF2775AACAF6750FEA2C899F956B60D
-:10630000AE6662979CC5A9967528671A7D67D459B1
-:10631000843CA44AF29088EB30C9590FE5752621D8
-:1063200087B1DA472F4779EBFB3DC81B63EB480E7B
-:10633000660AB9FBAEF2C6D01B9F82F294A99327DE
-:10634000590E3539D2F440AE52345C1DD325573343
-:106350008DDC4ED2E4EAE7682746B1B76E5015B13E
-:10636000FE71FB88F9320C68BFAD127E7FE64EA746
-:106370007CA7E87B3D806BC17A6A3017D791CEDC71
-:10638000BF0D46FF78E7310B433F7CACF1E9E525D3
-:1063900036DDBDB47F280DC2A236AA7BB92D8ED3BF
-:1063A000D56660852C0FCF67F38FF9809F71FF79D9
-:1063B000711EEE6BE1BBCAC8AE0A7A8AA3F8DB197C
-:1063C000CA785ACFF4D5EA9F7AE0CB7C3C379F2934
-:1063D000E679DC01233FD70E3DE4B926E27C06F6E0
-:1063E000DBE9E877EE18647691FD10EA2BD331D81B
-:1063F00057A2E381419F0DC6F38D4D208738BF3AE8
-:10640000070E4E60E7918F9EF47C4FF45C14ECDB3A
-:106410004B7A9A199E1B013DB7E3FD97DED2B32755
-:106420003DD9937E3CB199D3D929ECD358746E9F52
-:1064300004F32E8A1CDFA3AAB21CB381FCBC43A3C5
-:106440003FEE4B23E87FA9DD4DF59FDBF7D6805665
-:10645000E8A7B3F1C204C6CF73C8AEEB7852D8ED4B
-:10646000EE4C998FAD7D09AE06E7B9275F1F80FB23
-:10647000E4DB3003F3ECC9F8A25FA9295DF07A7B75
-:106480000E1F6B5CBBBFE5FC6C4FD5E667CB009481
-:10649000A7CF841E8839BE9EE414C70770AE52F899
-:1064A000F836188B7E877A263CBED129BD1A5F55F7
-:1064B00082992923003F87D9CC1218DBA1FA0EAAB2
-:1064C000B48FF3B406D04FB12FDEB31E5852E53C63
-:1064D000F372C88DED647FC68A7A9B4BB69F125DBE
-:1064E000B2FD94E18AB49F3A0F3DE4F4017EABD251
-:1064F0000DAE93A3709DF38A758EAFAB1A7E150D0A
-:10650000592EBB0447CE77D62A850D244FEE84D969
-:1065100051CECBB47455BAD97512D6AB33F539090F
-:10652000D8EF19BFD5C5D757978BF79BEE8A5C5F1D
-:1065300057AE89A3FA1A7EB1E0FEB3F163AC91BD08
-:106540006BC57511CA7262D78FC94FF513339D4B56
-:10655000379B3E43FBDD96ABD9EF2AE535B8550DA9
-:10656000C68065047EDF25F507EDDCDA1933B68BCE
-:106570002D372A3BA5F113F86FC58377DAB75A890F
-:10658000CF3E809800F0DA557B0DCAD50995CFE74C
-:106590002A21A715D656B3CF4DE46E41795E3496C5
-:1065A000691366EE5BA0A73F78D144F7B4D85700D3
-:1065B0003DBFEBAAC01256E444A7E7A2C61533704C
-:1065C000DDFEC0A0ED876BF371DCE798A110F5D27A
-:1065D00039F647E7A888F93AC4C4FD31AC86EF73B1
-:1065E00002F00FC7B7B456DEF72CAB93F3A56C5689
-:1065F0002AEADBD22D261604DC97E3BE491B37E8D6
-:10660000DF0C13F76B2C63D51B709F7EAF89FB7B70
-:1066100016B9989A097855FCC72FF3D1EFE3317179
-:10662000BB433B4F5E9EC4F12E9F1D347BA1FEBB3E
-:106630008DA3E680C685F6C10D64FF1433CF4ED618
-:106640009DEE8B6B64FC7AC25F8FAF6607753BD79C
-:10665000167824D72BDE60143D77994911FB3F3E15
-:106660003F669B647FCE3C93ECF7D1E4C024E4E02A
-:1066700084EABBDA3486F31DF9A8A81D665F443DA1
-:106680007357BDD9E7AB67C17A46AA37CF9482F575
-:106690003AA6D1FE98813C0DEDAA67EB827723875D
-:1066A00027D7ABF88FC79E0A80BC94FFF61E2783BE
-:1066B00075F303B536D503DF57EEBCCDE985F4B4E9
-:1066C0001A70223F3F081A0BA3D1634B981E5EBB82
-:1066D00082FE34219FAC26407E8ACF769A5CE4E726
-:1066E000AFB7842C20A7958DCB67B0E1943FCEF354
-:1066F0001B3F3262BE49E657F9AFEF4975F37B366F
-:10670000DC9FC44264E756EE786F1AAE1755AC832F
-:10671000E44CDF0EFBFF3C89E6F5427342F772C0A2
-:1067200093FC095562965535FEFC23A313F3B27C06
-:1067300094097B15E984FBFCDB4C8EE453F190BD9E
-:10674000845D82F35CA3070B72BB75FD23F70D3FDD
-:106750000EF89CDDF1A253191AA91FB89C75362CAE
-:10676000FE95D5105B8FB4811C46DA470098DAB9E4
-:106770009B84BDDDCCD395A69013EFB3ACDC66F261
-:106780008004B2958F1919DE03606F5882E8175D97
-:10679000F1D8F3AF8D07BAAFD86D4A9EC187635762
-:1067A00052BBF85205FF5B93D7C587F2279E37BBD4
-:1067B00087F1EFB72475F163C5EEFD6636AC3BFD9E
-:1067C0002637EC37B7DAA3F0A5E1F8345C67D73F9A
-:1067D000F25733FA133FD8A7B0B4ACEEEDCBB63DC9
-:1067E0004FEB1DD289F828F814E65B377E85663EAC
-:1067F000339AEAB9500FC6E2D732A177419E1F7F84
-:1068000006EFFFBC69F1E0F8CB1EBFC989E3785FF2
-:10681000ADE672FDCBDB52717E979902A92E4AF943
-:10682000F7B2077F44F2B6ECC88F52C95E60DE0C47
-:1068300003E9E240068E6FE9D66B697CA5CC47720E
-:1068400057F64B6311DE47FC546585BBA3CC8B38F0
-:10685000B342F8BCBF1D0C1918DFFBB8BF447DF66E
-:106860004723DD8B62EC87746FEC4762ACB0F2516A
-:10687000FE532BE7D371A12771224BF2BA63630B4E
-:10688000F2E74C7F6F1A9E73001D02825ECA3700CA
-:10689000D778646A1AE70F73ABF9A21DE8F7C9F855
-:1068A0001DEBB798BCB6E1523BA10F79FFAB45FF9A
-:1068B00080771CAE57EFA746B7F7C688F1C15F0BCC
-:1068C0008B90AF88F9CDE7FB8E4D7C7E6BF33D5806
-:1068D0005C88E59FBCCAE70FB6C3F501F00AA55175
-:1068E000F9FED90AE903D857479BD73B4C625ECBE8
-:1068F000E56029D27A0F78AB4A42A49C00FC24A21E
-:106900003FED834BB740BB08FBAB0AFBA37AE6AE77
-:10691000EF11EBC332A1074C6698FF1777CD7FB616
-:1069200095CFFB9EECC995A6E0C30FE07C7DC3E24A
-:1069300009B871BE9A8A70DC1FEE3AF0DA7520D77A
-:106940001F3668F354D69FFA795AB6670C8B364FC8
-:106950003FB4C3FE2ADA3C85EF51E7A9BD95E4F8C0
-:10696000FBD69F1ADD869A65BD897AF019776CFA95
-:10697000E9F5E0EF4D6EA2A35E0FC2DFAB2CBFBB0B
-:10698000DC69F2A6C959F96F2A2E407D1396474D4E
-:10699000DEC2F2A8C99B7E9C32DDF4E57F15FAE6E3
-:1069A0007A6BE13568175B3B18ED570A661B83B8B5
-:1069B0004FB67EC268BE4FBA219EF2738DAD4FA016
-:1069C000CDF756C5DC61B88E5FCF02267E6E5E6B5A
-:1069D000223BF5AB6FBE9908E3B94ED0F57A20F3B0
-:1069E00055C087125509C5019EF354164848427F89
-:1069F000B1C24E44E0717D999CC7BFCB52BBE0F45D
-:106A000054FFDBDAD5DF353DE2E767577FC294F606
-:106A100017603847C85171333FA7A81AAD04B3694E
-:106A2000FEB5AA4511FB84C7CCDCCE3832E59A31DD
-:106A300048BF82B9C31248BE6B87D03EB04AE8ADAA
-:106A4000CE803B01F57967730EEDFB3A0F2D76F89A
-:106A5000A2E8AF0342CE9E17E72CED76A5D608F24A
-:106A6000DECE3AC86E09D86D51FD6E756683B0777B
-:106A700004DFE0CF08FD9708399C074D13F222F898
-:106A800036FBAA0F5467773EE0DF89887DC33F4A13
-:106A90005F946BA4EF015BEBB4A228FE994785BE1F
-:106AA000BEECD92FCCB8CE4D692E50918E53EC460A
-:106AB000C9DFB15D9BAF43D950C4EBB26797DF31FB
-:106AC00006E4B8EA90D16383F155357F64F645D981
-:106AD000BFE9E989F0D17E6C3573FBF8A8A9682974
-:106AE000D2F5E8B5FC3CF74F664F45343C675B395F
-:106AF0009EF358D1A7A3957F3DFA16CC7584260145
-:106B00003D3AEDFC7E7277F9E3F3BED3A504D72AB4
-:106B10002887469E4FE6F77FA731DF1D13159AEFB2
-:106B20009747EAAF82A6E2C7F03E4B65B3E2324038
-:106B300079A5DA6A4639AE6ADAADA25DFE03377F1F
-:106B400067C1D4EA61B323FC5BAD66EE4F3AF0B7A0
-:106B5000EBE6237D3F9E6D61889777E8474E5CEFBB
-:106B60003F6E1E45F320D6B8FEE0F75C3305FDF11D
-:106B700066AECFF4F2302D395ECA5F3B99F5C37330
-:106B8000DECB2CAD3779A2F06F9D85CFD35EEB378E
-:106B9000EBFF30FD3611F41B976B53A47E9B6EE127
-:106BA000721FA1DFD2A2E9B7556BDD692817ABF6DA
-:106BB000E6A4215F571D5E9A124DBFBD20F6B58732
-:106BC000C53DE9F67EA0DF4644E8B77EA0DFA2F827
-:106BD000C1475B34BBB307FD66FDEF997F2FA07EF5
-:106BE0008B32DE2B84DC69FAADB0792DE9B7C27E39
-:106BF00046E93ED2651661C7C5D46F0BEFB996F270
-:106C0000264F7C14F941BAA27E3B2CF41CF6837A01
-:106C1000EE67966FA7E7E65939BE3DEAB9FF263A17
-:106C20006B7A6E557F85EC97EE72C8F5DCAA2CAEB8
-:106C3000E756EDE57A6ED520AEE7F4FA6D5237FDF2
-:106C4000C6DB57E6427BDA2766DD7703DEE72B31CA
-:106C500079AC507F865B7B5F503D2652DFFDCC12C6
-:106C600043DF7940DFD97BD677AFA0BE53498F0D84
-:106C7000C479A4978FE903E3A5FB6A47BF38F59B66
-:106C8000DFE27CF98391EE03BD6EE0FBA17D5F9CAA
-:106C90001A85F3EE65C407E6CB4E217F6DFEB1A4E5
-:106CA0004F270FE5F3BDE2501CAD13958D0A1FEF82
-:106CB0002D4AD08DEBC0DF3EA77DF2FCBD7C9F3C12
-:106CC000D7C2E9C17E6CE4EF2280040B23E4A1E487
-:106CD000F372F2F395A8CC8AF6EB8243D33F40BB24
-:106CE00075C1E73564EF2EC0EF78BF6277EB864C55
-:106CF000E877FE7285F61B4CDC87D0EE4B5CDFBC80
-:106D00009FEEAFE8EF4168FA7C7EB5FC7D81CEAEA8
-:106D10003F20C609F62CD185BD628CEA9F3BA0A717
-:106D200087878FBF6235B78FC3F400FAB895EEF44A
-:106D3000008ECE5898DA35FEF94FC2B892BBC6A580
-:106D4000D1433F3E6D7FB240CC8D58E3D5E8D76D3F
-:106D5000BC1A3D75E37EDE22ECA28BD9309C67AF76
-:106D60001B7C778C41B9F83D8C1FF099336F505ADA
-:106D7000A41E7E51E8F3AB7CC7A7A4BA915EFCFDCC
-:106D8000DD7565BB9F4F85715CEDCDCAC3AB08D780
-:106D9000FECDEC433FC2015B07E9354DAE2EB47228
-:106DA00039FFBB8073B4AF6B0AAD1F4D8A8BE64BC6
-:106DB00048A7B7C4BDB02AA027CEC7AA26B1DE8097
-:106DC000BCE17C9BA6AD3F487FF8CFAB9A39FDABC9
-:106DD000AA15A2FF4CD67110E95B99AC7842006A03
-:106DE0005AD3EEDBF01ED50B36F88EF3B64CF16CB1
-:106DF000E7E4B067A446954B359A5CB2EA21E457C4
-:106E0000D0D6C105582F09DF8BBC9E82F689DEDE05
-:106E1000B8CCD27214F1B8ECC726B68D75B73F3432
-:106E20007EE7C2BF6FA2DDE7E9417E0709FBF205FD
-:106E3000A4B71DE9DA6146B9AF0AF175432BAF5229
-:106E4000DD53883E1ABD9B605D18CDE98DEFBEF421
-:106E5000F4BC5ACBA33C63FD66C584EDAF043EF49D
-:106E600081A2C9862F0E6AF28BEFC4F474C1FD7F34
-:106E700046C47C47BD1479EE58D97484E8327D3518
-:106E800098551174477D753EFA749B0F4DFBA3DE38
-:106E900083FAB6F3E142AB3C1FF6D93A5E1C81FEA1
-:106EA000ADBD0AE903D69C28EDEFAFB0F27DD3016A
-:106EB0009B8FE4B6E3B089EE7BEBF5C658417FDCEF
-:106EC0004F44BE839B8C03C1F35D978DBDABE191B5
-:106ED000CDE527525FBF60F3119F62C19F26E0C7D7
-:106EE000B297C2F8627F789EE296FBD3AF179A9F63
-:106EF000A7A7715D23D6FBEF3AAEF0F9246B3133CF
-:106F0000EECFDF6D8E38679A23FCFC9A1F2CA2DE31
-:106F10004CCB98D8F5D0DF128271BFB0EB21F2EBE9
-:106F20009E7BF4F84C94DB15BF33322BF0B96D9790
-:106F30008385F83D0A33AEABE58DC6A8E7228CAD5C
-:106F400027FC56FCD6417AA57C8F253803DA973F7B
-:106F5000F5EE70F44FB5ADE3FA25F0A8908F40EB55
-:106F6000703C2F2F57F979B11EDE8F85BC9C7D3A7E
-:106F7000BE04F5A352CFDF759637CC355922F6E51E
-:106F80009578E0C6EBD13DE4C0230AF9C1BBE3B775
-:106F900096D77B84EBBDF2265310DF8796D76FA37D
-:106FA000FD6C55FD4766B4E326FFF631B223AA9A7D
-:106FB0008CB29FB0DE18B2901FD3781C53BDBFAE09
-:106FC000B2B182E6636583F087E9FC452B7EBBF7AF
-:106FD000A9009066C513BF76A29E39D3B2D3497E6D
-:106FE000B87AEE6753ED6A743F5C4FFEB7864D5139
-:106FF000FD6F67F03F60FE6DB5CAFE3756DFA757DD
-:10700000E7E02B1EFBF4413C173ABBE7C30711EF47
-:10701000955F7FFCE04FD13ED96773E17A57F5E881
-:1070200051F2AB6BED9E12F3AAED915F3FFC00CCE9
-:10703000BFB6372C74FFAA6DEFFB03DC30CEB6DD94
-:107040005FA4A2FF72F5DEA9B46F59FDE4E4B4F3C6
-:10705000DD2341B90CF6E23C44CF87038D4686EF31
-:1070600020CF1DB3909D11F6A3365470BFB45BF8CA
-:107070004F77453F77D2FC7E958DD75C7D29AE7BDF
-:107080008D268F9BBE0B3F604F7ED357819F237A07
-:10709000C1B75DC22FAEE3DB39FC0FE0CF9FACB2CE
-:1070A000BFF9D3C6A5BF7A00CB1AFBC4F49B867A7E
-:1070B000412FED5C6B9BD5FB8E15E7C39EDF907F68
-:1070C0001AF90536376B7BECD301E86F386DEAB8F7
-:1070D00091EE5FECB5D03DA1F2BDAFD3FC687BF281
-:1070E000089D173171AED4C6C27FFC1C40EC65AA66
-:1070F0007638B8BF55D01DFDB16E277D177E572E4F
-:10710000B79A3F36961FB68F4DDC0317E76C153BD9
-:10711000DE32339D5F5B198B7C3A2E9D0B6AE3D682
-:10712000C373211D2E893C4F88E5E7167A34CC279E
-:107130007E8ED0B64D9C2F84CF0D18EB9787F7DF4E
-:10714000F979775550799D45998FDA7982D3A69B45
-:107150008FC1DE9D23F48CEF77A38762E3FB568D0E
-:107160002E67BF8AAE8F87D814F1FEC0976B8B58FD
-:10717000771688F5A412E8C5DF93717CCF8AFDDD10
-:10718000D9478D41DC076F6838407A553FAF2B599E
-:10719000F4F821E36D5C9F5436ED1F8EFAE7ECB3F3
-:1071A0004F93DC55EE3A6E0E009C83F54F985B874B
-:1071B00076C939EAEB6084BE3EFBF8FEE1FC9C83B5
-:1071C000EF23F5F0AF10F0AB9A65F855BB3E92E0B7
-:1071D000AF0834985DF69EFB39A37AE7E278CFB426
-:1071E00098282ECA99066361B47825433190544A91
-:1071F000179D3638F8FB38639299ECC8D58EB1C725
-:1072000012923135BB711FBD7E2DBF0FB9FE679E37
-:1072100074E4CBFAC439740E54ABA3A32BD95580B4
-:10722000FB6BD794A2D128567A3D90E8354878AFC9
-:107230007614A6E17BEE5B853DC2540FBDDF333A89
-:10724000A715E2388C2E83CB16751DE5F04CF6227F
-:107250008A176172C9EFE9BEF7F80FEE7E72FC87FC
-:1072600040BF7F34FE03A33818FFEFE33F04B09F15
-:107270007F81F80F21F2DB68F11F92BFE7F80F6BF7
-:10728000991CFF41F0331CFF41F0F37FE33FFCFF0B
-:1072900015FFC118F7F729189F418BFF9012679EC1
-:1072A0001A19FFE1C2B884A991F11FC6C5A54F8D77
-:1072B0008CFFF083B8ACA991F11FE6C75D3435327D
-:1072C000FE4355DCA8A991F11FD6C64DA4BC16FFFC
-:1072D000E1EEB8A953E5F80F33A74E817C5B9CEF34
-:1072E000EFB85EC58AFFF01E4E96313DC77F00386D
-:1072F000E6B831B1E33FE8E1C48AFF007012084EFE
-:107300008CF80FDDF08911FF01E0A4139C18F11F28
-:10731000BAE11323FE03C0C9223831E23FE8E1C4D9
-:107320008AFF00702E8A4B891DFF410F2756FC07EC
-:1073300080338AF08911FFA11B3E31E23F009C8916
-:10734000042746FC876EF8C488FF0070A6D2B86296
-:10735000C47FD0C38915FF01E0CC247C62C47FD0F8
-:10736000C38915FF01E0CC257C62C47FE8864F8C81
-:10737000F80F00C747F8C488FFD00D9F18F11F0011
-:10738000CE72821323FE831E4EACF80F006715C128
-:107390008911FF410F2756FC0780F353821323FE08
-:1073A00043377C62C47F0038B7129C18F11FBAE1E2
-:1073B0001323FE03C0B983E0C488FFA087132BFE0C
-:1073C00003C0B997E0C488FFA087132BFE03C0F960
-:1073D00015C18911FFA11B3E31E23F009C7A92C387
-:1073E00018F11FBAE1F35DE33FD84203951C8AFF11
-:1073F000407122C3F11F92BF75FC8766C4F77FE31B
-:107400003FFCCF8CFF70B3DDF7751CF941BF5BFC0F
-:10741000075BFCB78BFF70B3BD283E1EF797DF32CA
-:10742000FE436AFCB78BFF00FDA4C78F89DD4FAC1C
-:10743000F80F39BA7E7A8AFF00FD0C3AEF7862C401
-:107440007FF0E8E8F67DC57FF822EEFCF11FFEE54F
-:10745000E22CC03605CF7F8A4914D9BF4CDC856B3E
-:10746000E3FFC97117C858F8578ABBA0BDDF6F305A
-:10747000E17AF5A6E0FB6B422EDE12F1178EC58C89
-:10748000BF10BC8AFCA2CBE5F80BD3051FE7F9645B
-:107490007998CEF879C3F429593C5E66992EFE425C
-:1074A000AE7C7E3DC377640A80635779E4711C111A
-:1074B000F230B3E4A3E7903D578F8D1E7F6196E0D5
-:1074C00047B18E2ED305DF8A457A3D3E4901799E2C
-:1074D00051764445BACE74B7AAE4D7FE81C63FB709
-:1074E000C4BFD902AE1EDF59827FB3AEE4FCD3E342
-:1074F000FD2AF2CF0969D928E29F1E6F3D9E7AFED0
-:10750000B3487E47C4CD286072DC85C95639EEC2C7
-:1075100054971C77E18A7439EEC2956E39EEC20F2A
-:1075200072E5B80B5779E4B80B578F95E32E147BAF
-:10753000D7EAE23E6CD2C57DB84B17F7E17E5DDC41
-:10754000876DBAB80F8FE8E23EECD6C57D785A1742
-:10755000F761BF945F5C7358AABFB4F688945F5616
-:10756000F786547F79F0B854BEA2FE03A9BCA2E10D
-:1075700023295FD5F48554BFB7711F5E15EF815F76
-:1075800013EF818F89F7C06FC688FBF0D79F7F719B
-:107590005BE47BFC2F7FFECD6DF81EDF20DEC1C6D5
-:1075A0008AFB102E8F11F7A1ABFDB78FFB9092FCD9
-:1075B000CF7F879F63E7E79B13E227E5D853BEFBA6
-:1075C0003BFC6B8BE4F7CC734BE4F7CC3976AECF56
-:1075D000E7F9E477CDD797C9EF9ACB6CBE6CC4437B
-:1075E0001FF76142BC37C78EFA52BCCF0FE1FB5484
-:1075F000581B9FC5F7A9903E87711F203D88711FBA
-:10760000203D84711F20FD3DC67D80F4258CFB004C
-:10761000E9CB18F741C5B811011137A246C48DA8AE
-:10762000157123EA44DC88A0881B512FE246348878
-:10763000B8114D226E4488E09CF01FA2F4A4BF85CF
-:10764000D253FE63949EF6B7527AC67F9AD2B3FEA7
-:107650000E4ADBFC9F53DADBB8119A5CFE19ED068B
-:1076600033F6CFE55893D319F6811B22E5B4C87ED3
-:10767000D10694D358F122E6224D5362C78B089766
-:10768000C78817D1D53E76BC88B4D1DF5FBC887F70
-:107690008BE7F2FA8FC68B985F2DC73358B0E6FCA4
-:1076A000F122CA6C45AB512E3579FCB7787E5ED598
-:1076B00053BC886D7645ACD74017B4BB802EB45E02
-:1076C000F7F0DEFE39C7C3B9B89FE8CCBDE8BC719E
-:1076D0000EF472119BDE3CAEC175DF739C889EE890
-:1076E000AAD57FB39CC72FF8B7F8F3C72FE81627A2
-:1076F000A2A7F802833E233DD9DB38113DAD0B3DF7
-:10770000D173D6F71C27A227BDDA933EFDE3744E52
-:10771000E709F1E78FC7118E0B676D39488D5D5E04
-:107720009ADAAA78075E30DB45FE93F65DE2DE98D2
-:1077300097B95DA9FC9D3ADA9BED7B1286337ABF3F
-:10774000EE625EE04FBCF8AEECDABF1FCFD36F75D0
-:10775000326F6212C583771B73701F36D28AFE9414
-:107760008AC68F5EFE1DC0B5351BE93E593BE0D091
-:1077700042769F3711F916CF6EA77D3A9E717DD361
-:1077800027F23DB3EEF71BB04AC4F9CD54A39DF6E2
-:107790004D9D5BF93D4F23BBE8BE89C9749F9A0597
-:1077A000DDC43FB25357083C3B31C5FA3E2BD98F5D
-:1077B000CB0E3F911F62FCBC32D26FD0A750F6D3E4
-:1077C000D4D99CC3F15D250B785BD0FE5E22E0A589
-:1077D00014C9FE9B0F17151EC273FA25BE52BA8735
-:1077E000905622FB739878378EDBB1F07D39C0A7B5
-:1077F000B449610F28DDDF919735DFB501F739CB4B
-:10780000837AFB9BE5A29C95B3380FEE7B57D4CBD4
-:10781000E50E87B8CF6167F65ED1AD75F07D134791
-:107820009F976E9E10D6DFE5A0FBB0CB0E2F3623C0
-:10783000B32CE932DD6C6E996EF1B9327DF4F473DC
-:107840007864FAE8E9973056F67F69F4D3EE1BAA1C
-:107850004CDC170DF27BA4DDDEE1376D233CF5F443
-:10786000D3D36B9443DC93E8A257913595543EE112
-:1078700099A18648BEF5F321D31E52F0BFFB27071E
-:10788000D7522B8F4345BD95CE413365096F178F76
-:10789000F301E3CA320FCD07DCD1A37F379EFD5938
-:1078A000C8FDBBEC1B486F2A7EEEF82228DD8AF269
-:1078B0003682FFFE02F9ABB4DF4D601E17EEA31A4D
-:1078C000FC56F71215CF05997BC9403C0F74517ACD
-:1078D000A778F7DB3E94D1BEBF21F4492A9EA3DDF1
-:1078E00099D73113FD0F554B5911AE5F3F72F277A7
-:1078F000179B443AC2C9FD339B8B0CCC3B1A7F8744
-:10790000C71854D0EFEAF21EBE1CEDD166939BDE81
-:1079100011BB3A5EBE9ECA47D1FBE80C43ED48C49A
-:1079200007EAD3FBDAF6E6779D8B23F4705BD3DDB1
-:1079300043F07EF1FD86E8EF7A4B1DDAFB367EBF21
-:107940006344579C8152C7188A47706736F453596D
-:10795000DC497CD4E47282A0FF73A5D309BF279BC6
-:107960001537FAEBA6196FF8C130C06FDC5195EBF3
-:107970002F71AF7BB4A8FF34F3A423BEE32E650AB6
-:10798000CE9F716F304F00495C5D4AF7E97EE79CFE
-:107990007608F935A519E409F5C859BB07AFCA8FB0
-:1079A0006991EFCB254EF11DC0FB85971C63A4CFD9
-:1079B0002E39A6EAEFC71871BF3FAE55FE3E41B75C
-:1079C000FF5CA7C99D93A5A2DC6DF9CA4878B5777D
-:1079D00030CF3A80DBBEA42F9DDBB67FC2C84E6C91
-:1079E000FFCA5818ED7EC9DD0EEEF7BADFCC487F2E
-:1079F000DF5F6AA7770ECF96965F80F6C5673FF187
-:107A00005D10CD4F1961A725F0F7E7DE043616E5C6
-:107A1000F05685D3BB36A328CABAA5C99D26879A36
-:107A2000FC6594C6F9A2DDD74C7672FB685269AE4C
-:107A30006246F9D9A730A46BDB3AC0EB3CEB768009
-:107A4000ADCB447CAA9A3EA67B58D66625EAEFF2D7
-:107A50003CE170F2FB80EB026BF1FEC5CD3089504A
-:107A60004F65986BB3A2C10FB02D64973EE070F3E1
-:107A7000770356114748ADCDC0FB086D4D93AFDC81
-:107A800000783E00F301F97BBFC94378072A18A3A9
-:107A9000FBA4C25FD76F26DBB639C2FEDDEB283808
-:107AA0008C727BD8C1EDC63E3E8F82787BFEFE573E
-:107AB00027C26FFFDC42FCEB2BEC4DADDD4907A785
-:107AC0004F89D37B00DBB3B264523E1E9FD3BDA46B
-:107AD0000FFACD81DE51EC2B6D5D4FF2313A9F48AC
-:107AE000B21B82A49CBC5EB74BBAEF1DA079A3CD9C
-:107AF00003165218BED7D7F49BD2AC841C20F7A330
-:107B0000ADF610DE3F4B2A837127633C0F2B87D7DE
-:107B1000A29E95FD5A208FF968DC337AEF8F8E5440
-:107B200084AFE93D4D5FDE9AC8F5D1AD77A9140F5A
-:107B300074ABDA6A437F6A96D73D0943D324A96EB2
-:107B4000BA97D2BF8CCFC3F89C5F2686ED0098E42D
-:107B500023BF362E88F69E2903E52905E9E5FBD0EB
-:107B600001E9F0431DCFA2B9E0B1B13EFCFE94D0D3
-:107B700013C2AE9926D6BB71EF19F83BCAD0E52CDB
-:107B8000F27D915E4F80DCFF097FBFE7FEF7548AEC
-:107B9000131AD60FA5D3687D62C6A10750CE26BCA6
-:107BA000C8F87194D00F2EF887F4B9E425DF7A4431
-:107BB000E3BBEA053DBF59C81ACEE34FB38D3A0483
-:107BC000F32D729D758AF55EE8919B8A07AEC7F921
-:107BD000A5C9D105B7788CBE083AEADB87FD948A3F
-:107BE00035FCDD9D837AE42523DE0F6B2F007E03B9
-:107BF0005D9EC4F902F44EFC247825F27D4BF3150A
-:107C00003694EF5B43935C33A04DA2B5889897C838
-:107C1000BCE4CFC903EA609C88F52414B05F578B9D
-:107C2000B29C29788FAB50F2F768BF8B070325BE53
-:107C300084F900721C798F55934FBD3C6AF2BB1ECC
-:107C40003758787E871E73488D4A0331C8C2B6BA4A
-:107C500050CF6AF6E5FAB03D9748FB8CD5C22E5A54
-:107C60006F9F662535B03F99D6F3D5B83EC1F8571A
-:107C7000A7309A07DA38F4F258F5B9810523F607E8
-:107C8000556A07DDE3ABFADCCC827D70DCBE493897
-:107C90006E8D2E23055DF474C8768AFDA6A0476C10
-:107CA0003CF35D787F36D1EA651B09CF4974CFB9C3
-:107CB000219467C5F5F6361D9EBDC06F4E34FC5449
-:107CC0007B0CFC44FCB609CCF7BB5690D7FC9BEA76
-:107CD00032F87AC15E4D8FE09F7EDE8C6DAA3E60E9
-:107CE0008E982F9A5F573F4F4634B36B90EEE34226
-:107CF0002AC3F3D79EE6CB2762BC55F19C5EED7399
-:107D00003A06A37CEE507DD54EB22F5A0D18F7B728
-:107D1000FD6946F3D9B3FFA493E21BB5F4EE7EBA36
-:107D2000664769F693BE9E663F697A57BB1FBEDD04
-:107D3000E9F363FF4A13C8278C7FBD8BEF8BF63ABC
-:107D40007CEBF07B3C8C018F92586E288BBF7F952B
-:107D5000E53F96BCC7EBE4B901E844BF9305FA7F61
-:107D600090D21D0FADFF29CE447EDE02B319F5502F
-:107D7000BF7CC63BAB64747FB2DF70E6C3F5A95F1E
-:107D80001EBFF71714EBF636A16FB574AFA3E87EEC
-:107D9000C4DFA4B28025EFBBE38DA8E27DECED4EFD
-:107DA000EF7D287FD6422F8D23D3C53C687F66AAFE
-:107DB0000D0ABE9B4C5AE956F83D6CD6F58E09E08B
-:107DC00065CE7017A09C64E23E1AEB37478FA3F58F
-:107DD00084D324D9991E168E53F504F60B76E6410A
-:107DE00033E0DD678616F74A3BB7F12848A736C768
-:107DF0001C42BAED5385DBE3899C5EFAFD00121E3E
-:107E0000F15345FE3633536D49ACEB77380D56B21E
-:107E1000E3E399A701F5D2CBCE6C712EEAA9C1FCA0
-:107E2000BFAB1DD6C4A15D727CE7C4591E15AA382C
-:107E30002FED1C8E7B2690E7C3886FDBC4CEC1B7C5
-:107E400012313A0670B9F11AA5B8381AFD9B4C12D6
-:107E5000FD6DB8CF8ED4830E33ED23DB94380FCE77
-:107E6000B3B6E50AC753B18AB841AABCFF17FA48AE
-:107E7000D3AF9DCE2CC23F9E05681FC0AC1E2BDD2C
-:107E80006317F8635C45F2EBEC8D0F6EC7F3285D6A
-:107E90001C457D9CC5C98BED74EF62CB5E1BED4B21
-:107EA0003B8BF8F97C67B385F46FAC799A86CAE0AE
-:107EB0003CF102816E1D48B734537522EABDB4F916
-:107EC0007CFEEBE9D18E03C5FDCE1F4CC168EFD51A
-:107ED000B5343DBD6F31DA65E919E9946ADFEBEC41
-:107EE0006AD47BD8C604458AD337047A14FB1C6352
-:107EF000027C3FE7FBE36B5ED675AFBD2E8ED3AF42
-:107F0000D3373EE161942B1038FA3D01ED5C53EC20
-:107F1000E7B5F8495A3F5BFCD6620CF959B768BA25
-:107F20000DD78114E6BD721E4ECA2D26B693DAE532
-:107F30004AF75DEFF58F2CC6F7C99909FC1EED27AE
-:107F40005BA6D27BE654B6CE3618E8505A64F0A051
-:107F50003FE0DCA2379D06909F45992DF928A7099F
-:107F6000265F66C218725DD17E6359893918027A1C
-:107F700025D78142203A06AE243A2E3444F50F67C5
-:107F800027F07DE75B623D494F1F50BC645464BEDF
-:107F90001FD1559323983F194B4677C5C3047E5E86
-:107FA0009410651EB49B5813BE97D0F451B2103391
-:107FB0004D1F6A729C8CF303EDB822D04FD2791F0B
-:107FC000544DEDFA3D43A5F9852FD08E755E3A8963
-:107FD000F40DCCDB1A92F35CAE3F6DA8CF22FC56B9
-:107FE000ED7B5FEF8FEF98DEFED9C70E7CD7F217DF
-:107FF000B5C381FAEBF42D7F72601CB0B76FE1FB63
-:10800000E41B75F6FF55423E8209455390AE0BFCCA
-:108010007FCF8FB4D7D81AEE7F5E1E94DFAFE2FD1C
-:10802000EF483F604583FE3E4080C72913BFCFA97C
-:10803000E7C33AC187E5BBB69933DDD8BF6F0EF60B
-:108040007F5AEC6F4E373AE83D8586CFA25D23CD4F
-:1080500068F3FFA5D922DEE9B598B85EF6CEC0F781
-:10806000393E41373D9E07F7C513BCA5F7F0F7AB86
-:108070000BA1AF35A0177DCD3C8E927E1C4BDF76D9
-:108080004F433FFAD24D0AEDE3B0FE2DB04EF8D685
-:108090006CA4773CFA712E0CC8FE1C7DBC466D3F6B
-:1080A000B04CF07F09FE1A6F4E94388ECDFC3DDD4A
-:1080B000329D7DD17928271EC7BF2641D8D9F9EC3A
-:1080C000128CDBB9E7507642B478185A7A569CF78E
-:1080D000E3BD7E4C4FFB19A55312DC3C5E57F39178
-:1080E0009B51AE2A9B76537CC47DC1F7FA8C872ABC
-:1080F00005CD5F1851A80A843D365FD8637B189779
-:108100001BB0A337A3FC5FFEB9CE8E16E3BC419330
-:10811000FB4349243737E0B886E377F59368E3BA41
-:108120003B417EFFD5DB7169E3D1C6A7955788F740
-:10813000E7FA769A9C4F1172B76447F186BE408A7F
-:10814000F57BDF1F20E2C8519C2D4D8EF472B24C9E
-:10815000F02D2C0FCD77D0B834BE81BCA78B7749DA
-:10816000E9E8CFE8492EF4FC6F33B50EC0F9AAE771
-:108170007F5B8C739FED09FC5C6389DB3B0DFD2B02
-:10818000601E6E7045D80FA7D5DA833FC579B483DA
-:10819000CB71E4BA48C6D28B265A675739DC698955
-:1081A00076C1B771F87ED112C07A5A3FA7FC35B3B9
-:1081B00006D27963EDAC8103E9DD06A55A79E9FDC4
-:1081C0001F3BD13E6DCF65E45F6873C8F81EC1C523
-:1081D000660CA69CFE2BD596AFDF421DB4A385E2AC
-:1081E000B79EFA4AF827BEB214461BE7D9046E07B9
-:1081F0006AF74F6E14F3E8C666FEDE6ED1D66233C0
-:10820000F901D6C8F7355E525CD332A1A9AF61A49B
-:1082100019F9ACE7C752CF15F40EBC1B5FD8EDC4FB
-:10822000D7A5FA776DE21ED302211F335D6E61A7D9
-:10823000F9E81DF1923A23D9F7CBDCD5B4BF59A1A7
-:10824000467F8F35C66538EF78F4E358D8A890DEBE
-:10825000D3E3BF6CC7DA0D7D198E9F8FAFFB384219
-:10826000FD48CF8871B2D6CBF9BB4CB16EFF174732
-:1082700094BC5700800000001F8B08000000000025
-:10828000000BB57C0D7854D5B5E83E73CEFC243395
-:108290004926FF21413C21111212E2908400017114
-:1082A000F24BC408030182607540518490207A5BD0
-:1082B000EFABB79990682DFA7AA358CB6DEDFD0618
-:1082C0002BAD0A4880A08126E9041403040D820A1C
-:1082D00096D68014B1053280B5587D8FB7D6DAFBBB
-:1082E00064664E92426F5F87D69D7DCE3EFBACBDED
-:1082F000FED7DA6B9F65ECD94B720E630FB7CB8C50
-:10830000E53356FBACEC65A98C2D63CAE9BE0C467F
-:10831000BF6BA9F85F67E59204C6EEC53F5568DB01
-:1083200057553278AE5CAE9985CFF56F90995982EA
-:10833000EB1EEF53C971D036498E4618C71E379EC3
-:10834000EEB33066817FD746D33C8C25E0FCFCD76A
-:1083500023B1A75260FEB38AFFBD0878EE2CC0E1BE
-:1083600081799678F873F47EF8FF32C78C2F2478E1
-:10837000DFFDEDF229730E5E5D6D32C0F8A52F4969
-:108380006C1D8CBFFF69DD78B12EFD3A1EDAF0A3BB
-:10839000B9E91981710F7B9F0BE9C3DA5456C0D834
-:1083A0007D023EF6EA7F05EE73F84DAE08C632ED6B
-:1083B000117167B3A05BC0265D4B63ACCE1A99C345
-:1083C000A2A03533C2233B64F46E02B8D644C08207
-:1083D00001CE355BA3BD1EC4E3EA68C646C0B8F64D
-:1083E0008D26B70DE6C4DFED8C9DAB6F9E9B9E0E78
-:1083F000EBAF7F7A6EBAC2D82CBB9DB189408FB6E5
-:10840000E7685CB7E29A6487FE2A4BDF8FEF5683FA
-:10841000F03899D363995C696286C07CFA7659B367
-:10842000F1CBBEA0751621FC56F86312C02FFF3D9C
-:10843000F8D5C4685B006EFDBC7FAADF1002F74A66
-:1084400085395B6C81F568E326DA0DB41EFDF37A9D
-:108450007A30E6A5717ABAAC443A04D117E15400F7
-:10846000AF3D1D56EF5A89F888E0F6748411DC1789
-:1084700093D6CD3D93C7D8617C00E0AE1DF132F5B7
-:108480005F515C6E7B3C5EF48F728DC76762199B97
-:10849000323CDE6046C6607C2ECE0FE3768539F333
-:1084A000988CD75DB1C807D31BFAAA2C40AA3AFB17
-:1084B000A40A05DE33FDB9BEAA30E83F629FCCFBBB
-:1084C0009BFA8E5A1C8C35B02915A5F0FC63700FF1
-:1084D000E7BB5E9B6F762D66C0573580534B0CB45F
-:1084E000C7C6BC8DF256D35B59214542CB984FCAC3
-:1084F000057E7046FAAC39D4678530AE33CAFD1FAD
-:10850000B8BE55579B2EC938EE98C2E5A53B8EF0F4
-:10851000A000EC61F05C53B853B503BE9A622C8E98
-:10852000C654BAEE098BC1BE535583AE6BF4C0E797
-:10853000108E2603734643DB75604C545FF6F0786B
-:10854000EBAA57AB14A0FFBEFA0C6AF5F78B4CF6FA
-:1085500074073C5F6460EE16DBE0FBAF22BF109D4A
-:10856000D414A4736DB789E41C7F12F0FD2AA1878F
-:108570006A81405100CFAA63CC171E89E3CABF505D
-:10858000B06D95D8E910BE6281BE3C3CDC37DAD6CE
-:10859000E27C4A309F703C152BA9554AD07B4B6D2D
-:1085A00099217D39D19081EB6172B86313E0574E08
-:1085B00031ACDE01EB976F8616F0A1D81DF2126880
-:1085C0009B4BA6CB4BA16D34B2852DD81AD8F26047
-:1085D0003C750879D2DA4B76D76F90EE17DEEF2D27
-:1085E000B0929E1A6927F916EB6D941C3ED4439EF7
-:1085F0002EE6D804D79A6417E37CDCC2908F7F2FD5
-:10860000E671980D3B55E0D7F7EC0F12FF3AA20C3C
-:108610008FA642FFA3E615150AF0AF23C5702515F6
-:1086200078F478F34ADECF325C190DFD4F9A6B78FF
-:108630007F2A4C99CCD8C9E655159E6C9C97EB3196
-:10864000B6C59985EF510C12C9A9B2D7E46D843F24
-:108650009B22393F3519812F6370BC4AE39F6A28FA
-:10866000DE6C05FE578A9DEA6A1BC735F2C3FFB46C
-:10867000D5F0285B0DAB118FD822BECF88756B74F7
-:1086800060ADCEAC39A8175A9C59732310AFEECF0A
-:1086900011AF793DBDD3510FB77EF049813B9BD3DC
-:1086A0000BE7C9EB612C12D673E1AD9B36CA528041
-:1086B0003E97EC45E7515F4BA0A61F877549AA9DE1
-:1086C000DD0372D7E864AA09D695C85EB2A3FD306F
-:1086D000207D4005B532AE5F3AA35C5FE2736CA4C7
-:1086E0008FEC4CB5DDF515BE5FD3CFAC3766483D9A
-:1086F000ACD757A69CC765067C1093D2767C29EA36
-:10870000F3DF9A1DB7A8088F933D0E706C33308548
-:10871000C5107B642870DFCAC21DEB50DE1D2CC95A
-:1087200003F2856823E0E01707F6D02864485B076A
-:108730003C5FCAA09D8470DD4AEB92919F263097E2
-:108740008C7AAB8079ADD8F677BC9584F87A3E8C7C
-:10875000DDE782D6F22A737A83F4467EB444F89F2A
-:108760001563A436DCD83217F934FC12B3A31FD03A
-:10877000FF0B9382F38360DC89D71DFB0D0CE1FCBA
-:10878000B5D16B8F82BE3F53515F6681F9FA059D6B
-:10879000B5799F37A999D1D0AF8A91082FBF2EE222
-:1087A000F6D8FF85C9FB722AE2C7B2DA1B2457E369
-:1087B000A3F9B8BAB8E2B1D1F07C4B4738C3F74F50
-:1087C000EA0C3720FE376FC90D433ED886B881F5D5
-:1087D000C798ED8FE07C315700DE54BAEE24BC2AF6
-:1087E000EA8428C06BE14C9BBA0EF0FEEBB0969980
-:1087F000C8F7FEAD06F632BC629BC93107FBDB2E23
-:10880000AB76D4B3BF4E6D09A7F56C35D07AB6857B
-:10881000FBC7AD01B8D7652815089F62650AEA5FF6
-:10882000C550AC3E02D7A74573FDA8E9E39A689509
-:10883000FACF4BF0FE5C1C5744725326DB48DEFA3D
-:10884000FDCC6B86F7C4CFEB95911EE173809590BC
-:10885000DF159FCC703E17121A5A9BD1AB929E75B2
-:10886000DA9600DDA70B3D3BFD644D258BC48EE3FE
-:10887000D854986F9FCDC8705DB7B13ED902FDDB6B
-:10888000AE32870FF9E7AA427E981DFE05FB7B6595
-:10889000629E5F494C898271455FAA0AF257110BAB
-:1088A000F5DBCA36947F81F6ADC4A2BB8EFE5C2494
-:1088B000B64AE03ACCB3285AF861A3D8A86BA4CF43
-:1088C00060D6046147555C7FF67FE1BAFA2B4C0E07
-:1088D0005CFF769BF3E3A9A8077B8D6C131B5E8E70
-:1088E0007E550F1A7D0C08C7D570E68D253EB42144
-:1088F000FDC76D68F684C17AC7A5F3F991DF506FA3
-:108900008CFD455C2CEAED8868AE4FB456E32FE44D
-:10891000237B14E723FBAD01F9FB5E742A8DD3E4BE
-:1089200009F90BE7D963F42E760D6117812FBF8704
-:108930007CB9DDC62A90CF9F19615988F2A4BD6722
-:10894000B7E07B7DFB54C39A2E23AEFB2FA0FF0123
-:10895000EED2E4ABA660FBDD15C7E12D93BF25BFCA
-:10896000FA62BB44FE7C423BD7D7C17C316268BE11
-:108970007801F17A3DBED0C7011A5FECB81E5F7472
-:10898000FF637CF18B68E1DF0ECB17DF46E2FA1F55
-:10899000EB2849647FC78F69137C30DCFD2956AE14
-:1089A000D7F4D7DB053E779B9AEFCC41B9BFCBE03C
-:1089B00040B906AAA7CC05FBB23B9C3FC794D5693A
-:1089C000D8DFAE703DB2BDDD4C7A64BBCDED267B09
-:1089D0009D6461E82730C5DDF77DD47FC916755DDC
-:1089E00010DF3E2EF4408BD137E573F47F0F70FA21
-:1089F0004EBE2B5736C1B8110F70B9CE3F67DA287B
-:108A0000C33CD53145BE6818DF17CDED62DD1918BE
-:108A1000057C597BC644FAEDADCE23E54E1BF937F4
-:108A20004EE4AF497B8E941767E378CE47DDA2D53D
-:108A3000FA53704D3164768E25017E5DC24E4C61D5
-:108A40005C0FB9903F72027DE634523CA6F141358D
-:108A500063596827E6F639CA908DAA2A42E95BED88
-:108A60009B4971DFFCE3CEB20858D77C97EEBEA0DD
-:108A70007FB58EFEE007FF01E564D5E6DE4E1BF212
-:108A8000ADCAED698B697516F77B56A7A1FFAFC913
-:108A900011FD004F2DBFCF78795D901D5763F83AD7
-:108AA0009F752874DFD367F2DE0297FE37E3CFB5F8
-:108AB000087BF3AD90E3DCC7DE588CFC9BB7DCB9D8
-:108AC0000FF1BF284EA6EBFFC97C9634A48F43213B
-:108AD000FFABC5A8967C2E05C631C5956183FB7B8F
-:108AE000E2C3F3F0FDD531EE6B4827A6F8BBF1B930
-:108AF0004985B9792857B6094DB1687F34B801AEB8
-:108B00008A4DB6001C1A5CE785FEA98E59720DF1DC
-:108B100080CFA15E693B75D682CF6B746FE9B8C414
-:108B2000E91D447FA47780FED27DD8D7F06011ADD7
-:108B3000D6FFE7E9EF1B89F41896FE18F747FE8F7A
-:108B4000E83F2A6608FA833F958ED7357FAAC50489
-:108B50007E7576A0AFD1BDDA5E44E31C265819FAC3
-:108B60004F9D1057A21CBAA3D1B9613BEDFC5DFD2E
-:108B7000BF3F3B0A5C4036292686CB93C93F06FDA2
-:108B80008D093E89FCBE0920F0F7909F3592F49D37
-:108B900043E0879D95A4B319DC05BF9682FE9F2F05
-:108BA00016E56082B9D287FCBEC33A3D05FDB75CCD
-:108BB000EBB434E4A737331E3B8426E7CDE4E53B32
-:108BC0005F51037E8EA6D7F68969B5F797C770FA0D
-:108BD000DF0E6A16FD3D740D83E1D0F4379205E196
-:108BE000907CD5866B56D2C7ED7D80AFDB110EC071
-:108BF0006B97C45A517F17199C7125E88FC5FB14D8
-:108C0000EED77D3D4A05BEA96C7FF738C25B69B1DE
-:108C1000F930DFC21CC6F37D41F912BD9FABF925C7
-:108C20009ADFAFF92D5A7C89FE0DDECFC7EB00BF6E
-:108C3000DD0C00A2FDF159BC0DF0FEE72FAB994E03
-:108C400021AF0AACA352AC6336EB25B8D8B7D7AE88
-:108C50004D03FACC12F8A8EC86B83007EF3376173C
-:108C6000E0E12E85C78B7739203E0CE2A3D99343F0
-:108C7000FBF89B9E1098E77AE3F5FA7FAAC817FCE9
-:108C8000B371A6D676831D3A0D0C70B09EC734859D
-:108C9000A3658F82F1803BD380FC5827EC1A84C9EE
-:108CA00043DB2321AF8586BE1C07E0B76BCF37645B
-:108CB000FFF6EEF9E623F4E7A67CA130333C5FF83B
-:108CC000457E14EA07E60A9DB7EE8FAD56C6AF1390
-:108CD000FFD48AB5EFAFC78C18C267A1F637E79FFC
-:108CE0005F8FF37D7946E1BC2DDE5F6E72A7DB6D91
-:108CF000D8F2787FBFC4FD1DEDFE7E23C00DD737AF
-:108D0000C568717FAF42F919F89983E87C17C6FBF3
-:108D1000B901BADE75AEE20B2567307DF0F7FF23AF
-:108D2000DED7E2FCB744FCC0F69D30A900D78CD654
-:108D30004714F4A36724C9CC19F4DE3B542B730603
-:108D4000C5FB6FC4E8FC907DAFAD9F0576A4AE4730
-:108D50007684A1BCB66F3F9483FD5ED9611D828F7E
-:108D6000F4F89DD1FE8882FC9F10CBE5E67AEF2FC8
-:108D70001C077C722BD29D911F77B1402239D2D330
-:108D800077EF9E9FC7F6650F8FEFE1E8AFA7C36F40
-:108D9000CE1747215EAE470F3DDF76C23A3DB03E6B
-:108DA0001FACD303FED6DE7A3BF5DFAE4FA2BEC6C4
-:108DB000AF751DBF8C457F4DE3D3B258CE37537688
-:108DC000AF8F65B600BD347C5D1474AB668EF9B3AD
-:108DD000E0CF5D922382F48487F5261504EC55F5E7
-:108DE000B172F233347B552D671B51FF6AF60AD3FB
-:108DF000C2A8CFF4F6697E7A9111D5AADE2EC102FF
-:108E00008DC8BFD50B43AF57F4342B11D433109D0D
-:108E10002449E043F8D51A3C1F3217C1ABA7A70677
-:108E20009F1E2ECD9FAE1674837596E1D2E7AA459C
-:108E3000B48E417655ACF746EDA9393634CEBA72C8
-:108E4000AEF4FD9C21F87538BED5DFD7F44039BEAD
-:108E500020975A0FFA1109B10944AFF2AB26E60484
-:108E60007BC14686B1CF82F3EFAF6492BD7B54D80D
-:108E7000DFE1F8A6F6AA81B96303FC636C7BCE8AB6
-:108E8000FCB35B69B662DEF136DB9CC628C053E9F1
-:108E90001F8BE7A15F57D76760989A2A6BBFB40F03
-:108EA000E3F6BAE3CC81FAB0B8BDAB04F9ED6DA539
-:108EB00057A638FA4BC69E0BF20FDBDA1BADE83F24
-:108EC000B5C5C914A7EF8FE6FCA8DD6F89E5FCD70F
-:108ED00076E6F22CE710F73F13F74B4FE51AD1482F
-:108EE000F6C74750BEA1FC6903ADBF54B25755A2A7
-:108EF000FF718791FC7A885BFEF07DCC37B599B71E
-:108F000063AABEACED878FD881102DFFE7B306337F
-:108F1000E60FE6488E97615CB9EAEFC27EF9BC5471
-:108F2000DA8799F47F65F25FFD774B94F72807762F
-:108F3000C17EF93DA95ECC3FEC9178DFD3C1F3FE51
-:108F4000CCEE899D05EFF9A03276C23AE229AD7FD9
-:108F50004BEE3A261838289E7A6C17DF3F7AAC4CD5
-:108F6000A2FDA3327B0AF304F155F9D340CF3CE0D4
-:108F7000C7F6C462E4DFAA0A997983F87ABECBCA3D
-:108F8000BC41E3F7877178FC92D98BF9124D5E678B
-:108F90000AFEAE5E181B327E0EE37EE242D66C44C1
-:108FA000F9AE13F0D415013CF0FC4C11A7DEED4EE8
-:108FB00009796F256641606856DC68B28FB3BFECF3
-:108FC00023B33A473E796C31BC876570F9D0E4AC85
-:108FD0004CAE69223E48921C181FCF97C0AB9451EB
-:108FE000DF85CAD1ECC9A1FD394EBD7E089577BD9C
-:108FF0001ED7E47C7E876CC4387A7E91E46043E8B7
-:1090000003BD3FADD703930C8E7730AE9E7BD54921
-:10901000FC35480F9CACF887F4C05B205B93415E45
-:109020007FA4E9839BD84DA80FCAE42DEB913FFAAA
-:10903000C1AE9987E00FCD2E68F17639C827F203CB
-:109040003BCFF725CAAE829CC606E2ED01FD007E4D
-:109050008363087FE657B16921FB4903FA22C86F91
-:109060003016FCF37E4319F88BA65C846F24F3E47E
-:10907000919EA2FC1EB43ECAB3255DA23C4A1DC40B
-:10908000F114CFB35F125CA8D7A49800DFEBFD0901
-:109090002D4F3B42E409F4FC3090B79B67F4229FCC
-:1090A00069FC506EE772513E4FA6FCB99E3FB4F783
-:1090B0005D8F2F7C12F085F477F842C8D38DF2C50E
-:1090C000218D1FD259FA8DF083C6071A5FE8EDC5CE
-:1090D000415DDE65387B71F23AF6E29D0C23E9656D
-:1090E000BD9DD0ECC28138AE7FC7C7F27D8A999909
-:1090F000F36DE8578C407D80FE9EB0370379A30D59
-:109100009C0FDEE95BAA486837500FA406E15DE4D6
-:109110004D35BEAB7D9A51FEB052E89F8B1D3C9FF2
-:1091200056572A7B2DF06749FB73EB79DF48F9B678
-:1091300022A54BB1C0BCB31D9203F3354E917F9B6A
-:1091400075D5E455293F3FF47E7A95E01B8C73700A
-:10915000FC6CA7E4851074901EAABACAEDBE5E1F0F
-:109160005589FDF22ADD7EB9294ED0F56676F3BF2A
-:10917000D2EEC7C72570B919868EDAF31A1D35FAF3
-:109180004DC0B1283FFBBE36A911DC3F46FACDB831
-:10919000AAD03CA3E242FD962FCFE7FE27C574621A
-:1091A0007C5DFB25937BFCF0F05FCF2FBD59F3C3B3
-:1091B000855FAEBD7726C8780A3A863AFBA1BDE73F
-:1091C000BAF6423CAFA7D3E4B8D07842A387A6470B
-:1091D00007E15BE8D9E1E8753D3DABE9B37FB59EBA
-:1091E000D5E6D7EC80F65EBDFE1D2E3ED3F4E953E6
-:1091F0001B0D9417B94DC4C1B7893CEB8342CE9780
-:109200000B7DDBFF178B01FDAC6D9DDC1F7198EDB5
-:1092100087D06F08E4F3385D9F8C601EDC2F674AAF
-:10922000AF85F62F8B81A4B87F99CCF72FB7283E56
-:1092300017E96987C21A405EFE2AF2164FEEF52C36
-:10924000463DFDE4E93106DA47577CBD18174FCAA1
-:1092500055683F28DAAC52BEF76287D98ECFF5EF5A
-:10926000FE5E9711E7F90B7360A8F6768779603F89
-:1092700006F54299DC23635EBEDF0FBE388C9FB6D5
-:10928000D05782F1CE6DACB711E3EA42A4E310F4FB
-:109290007B55675FF479FB920EEE279544F0BA9FF9
-:1092A000E980467CEFF43613F985D7CBDB177DC90F
-:1092B000C85F1A94AF6FE37A0606119FDC68DEBEC2
-:1092C000107D3DE0E39FE8F40E1B267FBFCDC4F781
-:1092D00073FC478C0CFD5E762E6EC8BCCBF5F2F8A5
-:1092E000BB3BC39D6A24EEBB71FF7C7767B253CD55
-:1092F000197E7C4E9FBF18F395DBB6CC55284E14D3
-:10930000F9CF41FB223AFCED90589315F369ED8EAD
-:10931000528C3F86DBE728F63B69DE1BC51B63CD1D
-:109320009CCEA27EE9762163DBCE863B91BFB79DC2
-:109330004D76223CBB057F6AFCBEFBCCE570DACFE4
-:10934000343955DC07F6475B1C2F13BF723E6F198B
-:1093500031C68BFBADDB853C6C0BF71FCC8A0BDE7B
-:10936000CFE0FB179DF59EAA33E9B4DF2D61BE5116
-:10937000DB27F680BC505D4E0C237E32B21686EFA2
-:109380006D74B29F633B7D9A1A85F8BE1CA7ED47AA
-:10939000AA519467F8F64A816BFC60BCEFA877513C
-:1093A0003D496BFDC22A05607CB3DE4D6D5BFD72ED
-:1093B0006AF7D4AFA6FB6B0F453E8E76BFCEB9A041
-:1093C0004A09D21B9FC5F3FC526ED6E912E473F62C
-:1093D0000D6318EF4C7FA24F463D71FB555847482F
-:1093E000DD887219F14CF9CBB4403F555A12867C96
-:1093F00079FB55E8078D97E2A3391D9A94A65B0A7D
-:10940000485A881FC2E29D17E3E0FA0FED2E7F5CF9
-:109410003CF241F5BE0B8CFA97F1FA0EE96EF902B7
-:109420008CCBF31551DE380FF3C6B934ED62C4DFCF
-:10943000C42E13ED7B6BF9DB5C31AFF3ABD03C7228
-:109440009EC8DBBEC9FA289F9C6F81C0CA8070711C
-:10945000FA39A5F94912E6FBE24D0EAC579898E6A9
-:10946000CAC37C6B573CA3FC695757C24815F0E050
-:1094700054785ED7A9E575D9DFCFEB767F1AE9215D
-:109480007D057E0AEAA7EEA3910E1FEDFF59C8FFE6
-:10949000DB810F627D4338AF1760F3E6511EFD7626
-:1094A0000B5F07D89FF878CAFBF9F61D86E77E7B2D
-:1094B00099F17DC4DE93B43F5D62C84CEC0338F78C
-:1094C0004963A3B07DF1D3C86C6A8F469E47FC7494
-:1094D0001AAC2ABEF7C37A56857567CEF76DB49F6E
-:1094E00031FD7D9B82EDE1FA3EAA477BBFFE1CB5B4
-:1094F00047EAFDD41EADBF4AED3B701DF9E7103CB5
-:109500008F6DEEE2087A6EC7A20813C2DB19C9B6E6
-:1095100068EFC17A335FB8AF1593F9EFC57FBECE60
-:109520007213D83BB37BBC3481B113F19FCF54A0ED
-:109530007F68C6A87FFF0BDCFFDD4F2EACB3005C5D
-:10954000F38EDA5A7BA0FFE94F2EAEB3A19E3D14F5
-:109550000ECA0EF546FF4190749687363D99710507
-:109560003B19FAB1A2EFE99F590A245F50D297C57F
-:1095700080B5A6FCC43FD302785C6075FF1BF64D36
-:109580009E976696DE847DE6C17A2EBF64A4F89E1F
-:109590008D94E2B07E6599DD7D2C3EC87E3BA53F73
-:1095A000D2FE51815362D1714457DACF62F653B182
-:1095B000C1F2B6CC5E760CE971473CDFBF9A384DFC
-:1095C0007206D749E8C74D3CA396229D0ACE95372F
-:1095D000613BBB229AFAAE85939A509E4B6DC33D78
-:1095E0005F42CF2F8837127F162B52487D887E5CD2
-:1095F0001E3013FAC7FE03E194179878CCDD887506
-:10960000A36549A9B9B2D0798CFAD11B711F6D62DB
-:10961000E587A5B1283F36C981E6A180F535C5C6E5
-:1096200061FD231644E1BA9E2BC1FA9D89AAE4404C
-:10963000B41539BB5AF1F9224784A308FDF1636AD6
-:10964000299A9CA3CA84C3F9306E46BAECB0C044D0
-:10965000477D774CBD00FDA28C28CAE31629ABAF2D
-:109660001CA67E84A341C5756CFC792DCD63267B39
-:10967000BE6356C97F20FF14BBA228E7576A3B355B
-:1096800037B82E0CD64D7017D9656F9884FCFD83C2
-:10969000523BF4778C9218CACF515FE69FE97E77F0
-:1096A000B81A0680EE30D94B71BE1D26C9BE96FA97
-:1096B000AE121CEF196354314F541EF745C8FC33EA
-:1096C0004AA5296710FEECA80978AD62E4A590FBD5
-:1096D0003D8BAC64272ADFCF267FA867510AD98B40
-:1096E000CAF7A71563DB63E07E7AE5FB951574DFA7
-:1096F000C0E3DFCAC5DF718A3EC5BB958B5751BF3A
-:109700004B4AFC777CDF95ECA85CCCA3CD4CFF7A70
-:10971000AE12ECFFADCE24F9CF1579BC2243E6FAA8
-:109720006900FFA307F83E4465B6145237372BFF94
-:1097300054483DA86BDA1721FDB9A59742EA43E7E3
-:10974000557E1DD25F304FAA0A1E5F7A209FEC6BB8
-:10975000BEA85FD2F24B458285DEA9CFA82A05B903
-:109760003C00ED03A01F8A7A45DE55E1717506FCC9
-:10977000433D586AD3E577994AFBD915DD7CDFBABA
-:109780003CCE783AD83E54C84F707F41B7FEDC03D8
-:1097900046B293B9D132E5AB34F82A46863EAFF9EA
-:1097A0005F1502CE1D0677530CE5C79CBDE87F68A8
-:1097B000F06BEFD7E0AE90EF29A5EDBFEBC0AF8720
-:1097C000170025FF4D0FC78178118780BF41FE59D3
-:1097D00037AF4B835FDC50765BF3CF2B414F4507B0
-:1097E000EB299B1487F576C3E9296DDEE1FC306D2A
-:1097F000DE6576173DEFDCFAD9D14239A89F7A2A87
-:109800003626B8FFDA67EB43EEC79FAA8A0EEE6FE3
-:10981000FAAC0AEF4F57D4461BF0E34126393CC857
-:109820009F3DAA82FBCF25C79C4DD8969D74639916
-:10983000299B71C6D384EDD4F3DE1E33ACEB8E0CC2
-:1098400059C5B85DF33FF4F09A13781C72F0AA6A18
-:10985000C5FDD31D1ED58AFEFB8E27542BFA1F3B58
-:109860009CAC02E331679A6135FAF3CE2C5E6778DF
-:1098700055E8E16FE2F9F35A7B5A717F837A11EB75
-:10988000C2D127A8FDDA4F75E007D1AFCA1EEC5749
-:109890001D54BC367CDFC127BCB6E07DC21BF5ABD6
-:1098A000FE8C363A1EF96C4E887C9658EEAE0A96BF
-:1098B000EF32FB9290FB9FC6A904FF8CA48743C69E
-:1098C000DDA13E12D2077F3103FD914613A33A5921
-:1098D0008F81D7C9EAF1F8A8C0A3C36647378619B4
-:1098E000E354AA6BD38F739470FCE9AFA727F0B849
-:1098F0006823C80CB6F72470F8F475B1FA3EC47C3E
-:109900000B713E983909F9DC61355C0157973913C1
-:1099100092EEA47AD93CC3A369D0AF4EC8E2FDA9A8
-:10992000869D581F7B774236EFDF6AC833821FF06F
-:109930002B36FE4EAC07AF0D13759D0F24D27E98CB
-:1099400016DF2886532F2EC638738F9161FEFE19BD
-:1099500013D8BDDCC0BEB9D5CCE352AB89D76D3FBF
-:10996000957AF429D41B6A987B7A02F951C52AE2C8
-:10997000EFBCDD42759D8FED2E4B44FADF93C0F3B3
-:109980005C593BA726A17EF917BC7F56C2C4E1DF14
-:109990008F75BE38CFF91D59E47F67DD0CE895025D
-:1099A000F887F098AE87419840E725983309F36C23
-:1099B0008DD1269AE79E04CE7F37DA0EAAFB8D3230
-:1099C000ACDE0EEDFD82FE0FE07B095FFE51737091
-:1099D00063CEEE1F35773CEF237D6539D78F7EACA4
-:1099E000FF3B11B4AFC246FA69FFE5E37BB21CE866
-:1099F0009F7E12CEF1B7D03BBAB14FC5FA0DEF4DF5
-:109A0000582F9191E8AE453C2C327B6F21FEB1ADD1
-:109A10008EC0F96FB41E78F07B218004FA544FE1B8
-:109A2000F4D1DE0B38B5A03DF8589C03D1E080F7A7
-:109A3000FF00F9408367000E5D5DB89667AEFBA33B
-:109A400081F20C7512E83DE8EF3CC91C1E98E7A2B4
-:109A5000E6AF8BBC266E45E17BA61C5E5A62833660
-:109A6000BF6D258F737B95903CD7A4E38A7EBF831F
-:109A7000ECD654ED795D9E71AA886BA7EAE2DA17FD
-:109A800013849D4966C9C1798035226EB8DC333AAA
-:109A90000AFD4CD45132E0D5A4CA6C724C40CE5B66
-:109AA00021EE674171BFC667E38FD9EF47B8C71F83
-:109AB00063F7915DD7E61DC82F70BC5C3ECEF132D6
-:109AC000A12FE3A7D3A06FEC3632AF1A584F21076E
-:109AD000955DC6FFE078BBC98B75CB05077E99E71E
-:109AE000834BE624035383F010A6863335482F5A60
-:109AF000336242FAB2866F61CFF3C4FC118EE490F8
-:109B000079F6C49477A37DCFB32D27FB1E357974E6
-:109B1000C83CAC4709B1F3B028DABF9C0840FD0C43
-:109B2000F05A704C09B1E793E23CB86236F9A4A24E
-:109B3000B3FFCD32CA41E199D0EB0786A3CB70F8D1
-:109B400063393F45FFEE1FC55FB433147FB115A1E4
-:109B5000F88B7785E22F7161289E46B843F192B267
-:109B60007C5CC8FD9B56E786F46F7EBC30647C2A23
-:109B700018A4E07EDAD33343C6DFD23C37A43F7665
-:109B8000C3A290F199DEA521F7B35E5D7143F41E87
-:109B9000DFB226649C9EDEB7B6FDAF9079357A7B46
-:109BA000E0DFBF82DEE6C4507AA70AFD1AEDE4F5D5
-:109BB00065FD46DBD312E8234C13A15E8B6E7FF765
-:109BC0006BCC43788A55AA9FF3CC64B40FFD82EC2A
-:109BD00092500FA5C0148634AA5FA7FABB1F1B0CB6
-:109BE00021FBE28989DCBE2726F27CCDCF4DFCDC4F
-:109BF000520AF88F64870C2C102F031E22315EA6A8
-:109C000078FAC7CF60BCDC14DD97A1427C6CC6FE3D
-:109C10004D017DB9C8AC36F6013E26C85C1F829E58
-:109C20004C4B84F93F919E30723FC263443F22C542
-:109C3000C23C91B9643F287F1CCDE224ACC78F0A97
-:109C4000E869F51A106BDF8A2C3A07F51E4282FE8E
-:109C5000AF2586ECE8DD9A7E5A9E49FAE9B22DD40A
-:109C60000FBBFC401A5D3F71AF99F6FB4F883A4439
-:109C70006DFDE784DEFA53BD85DAF3F5F6103DB6E7
-:109C80007CE3FA08F41F4F64707F51BB5E82789BBF
-:109C900088AD2CEC9AC58EF9AC7BC0384701BE5715
-:109CA00075F7452E62E43716E3BA6B375EB9F74DA8
-:109CB000E8D719FC09DC3E7878BDCCC78CFCCFEA2C
-:109CC0006F5888FF343791C7E973C5FC0BA0B10307
-:109CD0009E1600FEA3B17D775A39F2275CA7F3697F
-:109CE000B3BB19D59FCC71A7D23EE351E6F87017EC
-:109CF00080F89D4495E09CC75CB45FFFD1BDAB226A
-:109D000070DCC07CDA3CC028E86F7C1CED3126603A
-:109D1000DC7F1BAF6F80F759F0BAEB9E9427D10E12
-:109D200069EFFB88B92F7C88FBDDCC41F36AF33304
-:109D30001613A29F762C5FF9692CBC6FCD0103E549
-:109D400013D6749829EEEA5FF1D7AD2FC2FDFB520E
-:109D5000FA6E42BBFCC98A6FC6203FDCBD01F4101D
-:109D6000ACB130CAFD7062509C72E2812B11781F39
-:109D7000ECEBA617D1386E36537DEF272B368F09C3
-:109D8000F6471F4D2CAAC5E7D8E41B3B6F58F27A63
-:109D90006622D563097E7A58F0D39AD7C6921FB54A
-:109DA0002662809F787F13AFEFD0D6F1A1E0C71570
-:109DB000AF7F5D107CCE7407F0913A86EF6BA920DF
-:109DC000533B7B2EE7E0FD57147713C2D779F57428
-:109DD00024F677BEF737829FCDBB317851063D051B
-:109DE00081FD65EDDCE5C2F6D83CA43BC85933CE15
-:109DF000BFE837AF5DF81DE2A763F3A6EFE3981B5A
-:109E00003C7FC9847D71083C807DA1F8A09F85F3CB
-:109E1000731D428F2AB8839E86E7991C2AF1B3935B
-:109E20001DC27D97C62E03C3BA9548DCB409CAB3D8
-:109E300045CA06CD08392D49A09F855E7925F1E4F4
-:109E40009D4DE4E787FA3DF96FAF08F1775CF08F3D
-:109E5000FC9D97DC8D9807BAAEDFE3332C3145DDEE
-:109E6000B8FF0381B0532A105B38F06B4B14FB2210
-:109E7000420F77A21C61FD3FCE85F97A5F383F67BC
-:109E80000CA602F5F80F604DF8B02945B4D2C50C08
-:109E90000BE8C5BD897F78E669D0939674BE5EEC09
-:109EA00037E2DFDD9CDF06FCABB7C7919E62DFC205
-:109EB000DB100F225FA1A7533EC8078B0D9233F131
-:109EC000BC6FFFDF22314FBB35467D1FE9E03F20ED
-:109ED000D33E4D98D2678A1E222E7B13F59E89FBB6
-:109EE0004D546FDEC6F38116D5C9300E08B3DB279B
-:109EF000049FB36B17FA6ED5FE4F4699800E170C70
-:109F00003D91D9307FCDAE1D91E8C6DF6B747F8A5D
-:109F10007CB7F2C40705763ACFB671149D03F08D75
-:109F2000A6BA83F10AF328B983E1A8DB904BC6B83F
-:109F3000760325E3D9F8F6BC87501FD5F9F83A71B6
-:109F40006E2CFCCB6C63D4BFD8D61883F3D5FDB68A
-:109F50002319E567733C8F135FBF3A8E3FAF30051F
-:109F6000C77F99182DF8D96BC03863B3884F2E5E20
-:109F700035D038EDFDE3DB8A643BF043B6AF792F93
-:109F8000C543ED6615E91AF60AE378680F2339AF81
-:109F9000EB9CC1309FDF1FCD1C12DCDF1AEEFF03EC
-:109FA0009D33EB30AB981F0DB337B318987FABD808
-:109FB0000FCD048EC2F34ADA75ED7D61ED3FC558D1
-:109FC00002F981F2B4614A33BBCD168CE708C27343
-:109FD0003CF2533CBEC767C0FC88FF16C65E26B87D
-:109FE0000270327AAF066726F9735B4DFEB3787E56
-:109FF00005E0B223FD33198793B58F5531BE0FB3FA
-:10A000003B691D6176D5E19106C35597C3BC68BF16
-:10A010007FBC960DC82BCA6F5D78A06F0119D83A26
-:10A020009A09F9B63F5B3A2DB80F8A6472E0F9716C
-:10A030001B629E6D1A49718347C63816DA88185C10
-:10A04000A7CACF3B636A2897E301F7C5AD167E7FA9
-:10A05000603CF0B70DFB363ECE1165B7CE94484E4E
-:10A0600028AF572BE4FD31C977F67690D3BFF8F6C9
-:10A07000E6A8004BCDBB7B884F571ADA5F1C0FF761
-:10A08000375ADCF94980CFB74E1AE81CE99F5E0BBE
-:10A09000F35662FCB87B63827308F9D0CFFFC3E349
-:10A0A0006B9F4F41FAEF9654CC9BF61BFDA310DE3D
-:10A0B000DAF6CF4D548FD0768AEA938E24B99DF884
-:10A0C0009EC96D0DB46F3C8535D3BE7196387FDD6A
-:10A0D00092C4F5C7E563635E6E08C2FF8349DC0F77
-:10A0E000637EF7CD2837ED423E3BD12F817697F046
-:10A0F0008F7675DD9DA606E5FD1AD8DE14C4F75AE5
-:10A10000F636B5DAF57E2F3FCF98F591E53E67102C
-:10A11000FFB993B89FE716EFF327B91724A1DC76B0
-:10A120009D3645AA785EA56514DA9116F09FEC433A
-:10A13000E065406E757254A7F84D38BEEE1C3F774F
-:10A140000A746EC2FAFFCD1FB58D5B02D77701AEE0
-:10A15000B1DED373C24C758FBB8CAE141CDFF0E143
-:10A160005739A8B72A1069F0BFAF3A56DE8C78038A
-:10A17000BE2F0E47F9DACE488F69F2998DF209CFDA
-:10A180006723DFE7633F93F4F056532F3FF7B98B14
-:10A190009FFB04BE273900BEB7A39F906D0739A06F
-:10A1A000E7C7927C6FED35D0F9540FE8F15BA85FFB
-:10A1B0005C85FDADBDA576926FCCC3E7A29CFAF697
-:10A1C000D23C2D108320E924E60AF61FDB132389F5
-:10A1D0008F35FD783091EBFF960C350AEBFFADB271
-:10A1E0001C2217417690F7859DECDD50FCEC0BD3DB
-:10A1F000D0DE09BB20FC27769CEBF94785AD5AF3EE
-:10A200004EE1EC2DB0CE3587E5817A6EF4577D8234
-:10A210004FF60AFF15ED849AC7EB67F0FAC40DBC40
-:10A22000CEB5C0B9BA04CB38265734EFC3B6D0D5B3
-:10A230005282678EA72DECDDC7CF1EF3F3E3AD7B13
-:10A24000EFC8C27DEAFE136686FB24AD7FF3FFE113
-:10A2500075C0C3773B01FF43D825580EF11F58EA5C
-:10A26000149634F87EBFA4E98FF995286F175BE543
-:10A27000401FEC612D3038F67F9D54F5AC07004B44
-:10A280001BE17C1D59A230D94D6DFF91BF25A02D3A
-:10A29000D8758CFB4DAD266716F24FEBE8D0F3FA7C
-:10A2A0005AFB62123FE79C6F6643E6250F09BB37F6
-:10A2B000C6C39E413EAA6D95ED5EA0FB8556D96949
-:10A2C00002FFE6ACD39D806765CE31CF82A968E7F7
-:10A2D00045DCA87D4F6519FA2760A71E7C61501EDA
-:10A2E000DF807CF450BBC47E066B5EFED2D0FB0ADE
-:10A2F00035629E87DB36EE4F013AAE7825745C8D71
-:10A30000A813ABD1F92F8792447C98C6D2D02F01E5
-:10A31000FE21BD605458B719F8F5C1647707C61B14
-:10A320009BC5770C407F921C7608BEDC2AEA04FCB1
-:10A330005B25DAD7CB7CD52B1BE0F942C52BA39D3F
-:10A3400062D0E23EC164A7BB1CF10BEB3E86FB353D
-:10A35000CB851E5CAEF9655EBE9F01E696FCB22918
-:10A36000CCDB1889EB7E5572F854FC8EC8A03A5CA1
-:10A370005A779D5877CD8623FB318C5BD5123AAE48
-:10A380004EACBB4EB76E6D5FFBCF49BA73C837B8E2
-:10A390006FF16723F7133E10F368F7CD23B83EAC97
-:10A3A00005F0906E355ED9EBE57E9D0DBFC373BFA2
-:10A3B00080F77E41EF3AE633A5C0B8552FF075B26D
-:10A3C0006743EB3F1F6C7DC484F1959E2F966F31E0
-:10A3D000923F0A8833A1BFA8E78B1562DD2B74EB8F
-:10A3E000AE754B3AB8B89F3C18AE960548D7555B4A
-:10A3F0008C0CEB11F5702D6B59528E7C36985F39B1
-:10A400005D5688F90270AEA6737C370AE7A8118200
-:10A410002FC7B17144978AD81BA28BDE8FDDBE7F18
-:10A420009C15E5FB72F7688ADF35BAEB9F2F177E24
-:10A43000F08C0D8CDA0B6D25D6F118A7F4181C9250
-:10A440004AF156E478C0475E87CC2AA1DFDF9EB68A
-:10A45000DE0378CF3D9C5F85F17CDE61039D77DB79
-:10A46000D99D4FFBC07907D263D3281FEDA0EFCD54
-:10A47000C03C643FFB7B72D7E3B980FE9ED27C9CDC
-:10A4800057827168E773851D68E8C9B5069FEF2E8E
-:10A4900018C1E3F5A7923EFB31FAE133B61BE97C24
-:10A4A000C30CA3FF3DAC9FDAD9ADD0BE75CDE1A5FD
-:10A4B0006BC390AEAF49B46FBDBF774DDC62E4AB08
-:10A4C00076A31DF7A1FBDBFF6D2FDEF76C91E87B18
-:10A4D00012751D65595BA19FBB31CF117CDE2B37F7
-:10A4E0005A25F8D8082BC5C3336E32925D3C9F6C59
-:10A4F000FD25FA372B9C1B498ECFEFD969A2FAB9FB
-:10A50000AD1243D3BF3F69DF1B888FF36F1E31A1AC
-:10A51000935DD27AC4D4F777ECFD052F04FE1407BF
-:10A52000379B304E59B551EBF799904E2EE1FFD441
-:10A53000BE728AFA2BDA24D2332B5E92E93CFBBE40
-:10A540008EB74CC8C7B55B2496981A747F8314F2F3
-:10A550001D84A58CF3C152A1675632EF53C9306EEA
-:10A560006533AF23604F87D6E5AEDC3287BEDBB400
-:10A57000AC79687DF3B0E0EB87301EBC15BF831467
-:10A580003AEE61EDBB5C3A7E7E5CE3E74C9689FC7B
-:10A59000FC55911A950DD7BF3AB2E2E6A1CEB1F7BC
-:10A5A000083BACD9C1CB3E03D911FDB88B6D570820
-:10A5B000DEBA9ECB26B483E5ED9708EF95ED5D54AA
-:10A5C000C7711773D7209EEE6AB7DA518E2BFBB88E
-:10A5D0005E9AD96EF67A25BCDFD284F4ECEFE4758E
-:10A5E0008B9E3D12F92F9ABE7A48E0EF2181BF87FA
-:10A5F0004041A7E4A21FCBE3DE873336EE8F81FB19
-:10A60000B5E27ACD817D91E8EFCD6497EE457AC0D1
-:10A610007B18BE87BD148AE73B1987E3CE2DBCDECD
-:10A62000596FAFFA4764CDA6FC23C49D084FCD9661
-:10A63000503CD7EAE2ED7523B87DDEA4C373A59F35
-:10A6400059B3110E5576786974AF82EFEDCE91282B
-:10A65000BFDAADA6450DB5FFA8B5EF09BF59EBCFE1
-:10A6600016E7AB5BECCDB6E038D894CCEDFF8A2989
-:10A67000B207E934103FA4EFCB510D81F801E28617
-:10A68000DF8C88E771041674BC3B5266717181F8E7
-:10A69000E18749EB2B73A15FB785CBF9C5C9301FA3
-:10A6A0007EDF4B61E45FD66D31D339C03AA03BC544
-:10A6B00009EDFC1C83AB5D2A437A83FFFDEE88899C
-:10A6C00078AE8619E360DD73DA389FCF29BD447C0C
-:10A6D00072209DAFF7B2A2260EE58F6B7E389EC327
-:10A6E0005283CF3F805CE2F8DA765E0FD4BAF7EBA4
-:10A6F00051A9A8D73AFE3A6A09B45746F0F56B7EDD
-:10A700009E1FFCBCD1DCCF3986FEE7839ADCD8F9EA
-:10A710003EDA83C2CE30A989F8BBD6D8F2760CFADD
-:10A720004D5BF9BE3DDB6DC46F9CB1860F5E6F8AD9
-:10A7300081755F7C5DA27A347CFE09E0B38B4B5B54
-:10A740004EA31FFDD5560BF98F0F828F383D77B082
-:10A750003C6A72AB7D77AA81AD257F722D6BA276A4
-:10A7600095E0E38B6D8D26CA9B79839E1F3DD8EFC4
-:10A7700058A5E33B537228BF357C104EFE5FFF01A6
-:10A78000D98EFB2780A7FF4E0EC687F02F5AF7867B
-:10A79000113DFB8FD8C85EFC49F0D97991376E988E
-:10A7A0002CD3FA0D53789BD5F9D668A41FE21BEB86
-:10A7B000DE3777BE358E9FA7F612DE57BE8A49F187
-:10A7C00020385BAC94DBD3FA0D1F2CA2EFF0D4ED54
-:10A7D00019806B8C292E00D770FC2F493C1E344801
-:10A7E000A1F160DD6ED9155CEF05EBB90FF54F9265
-:10A7F0009003A6F813D02F1999AC92FD6A68E7F47C
-:10A800003474F016DEBF80E73B8CF4FE41F78B3DDD
-:10A810003578FFAB542BDF4FBEEAA9C4FE7747CB98
-:10A82000544FF9DD0F568C0DD69B0CE1047AD619E6
-:10A83000FD0914371E31107C75472E27A4DB501FED
-:10A840006D2CB567A3DEE1FA6EFF68EB72E4630F6F
-:10A85000BE373130CF6BC2DE325C6F127A152FF00B
-:10A8600079C57AD7B2B9223EE67C942DFC3D882B7F
-:10A8700026264F1C1C57DCA83F09F6E0E86209EBCE
-:10A8800089140FC6B53B8F737DD0D0F1D0A7C8E730
-:10A89000759F98A9BEEABB9D0F8DA53A5BB7FB5685
-:10A8A000F42BBEEA7CF856CAF3496B092E0FC29707
-:10A8B00084FECB8709580FBAAAE3C304B2AFBB2604
-:10A8C000AEF744A09F927B275E07BF81F80FFC176D
-:10A8D000E2BF9D3DF99ABF62C579571D505C889FC4
-:10A8E0005507F20F55A21F71B8381FD5B874389F9D
-:10A8F000FC953CF4576C01FF455B4F6532AF77E93F
-:10A90000EF0AA33C81C44673FE61E921FC53D3FAEC
-:10A910000ED9F59A3639A46E507BCE9DACF07D7E73
-:10A920008D7F5A2427F1C776DED6B4EDA4F5AD3479
-:10A93000B610BD1BB618F9FDADBCD5EAAA3D2CC6B4
-:10A9400083F8388497800E334D5EFA6EC5C154EE9D
-:10A95000BFEBE9F15932CF631C3CE1BE19F9E56068
-:10A96000917BAC7D08FBE061C53C3E9504BE5BF984
-:10A970007925FDB853C93C8E8F8C0D3D3F3A605F01
-:10A980009239FFCC340DFD3DBD9F69F2C4D833062A
-:10A99000E08BA39546FB3AE1B78F08FA5E42D55D9E
-:10A9A00046F20F8E32FB3B5867384BD3AF93B95DFD
-:10A9B000D5F2DDAE0D2ADFD7197CAE91F4E47C6DC3
-:10A9C0003EFD7969E1D7CCD7F935EB35FD37868D7A
-:10A9D00041FDD722CEB9ADC90CF306E7A3F4ED7E55
-:10A9E000B18F81E775B06DC8FC98F23607BB4EBCDD
-:10A9F00041756627C2D8689E97A3FCF5AA61F2D775
-:10AA00000D03F2382F84BF347A5C10DF55D1D3E3C5
-:10AA10000D81776D9F2D5CECB39D56DC6F24535DEB
-:10AA2000D67913FF8E9A9FE2AB864CEE1F5D28937A
-:10AA3000685F1CE01C650ED2EB1746F0B8EABB0B52
-:10AA400024CA9B76E1788C9F5A24AAAB5EE5EB354D
-:10AA5000211F8D695DF224C9AB871D6341DFA99871
-:10AA60006DE17671806EDABA07EC568C87EBE138CF
-:10AA70006A713CDAC159C2EEE9CF218D65BDE51896
-:10AA800057563B2507EEDBEBE93D77E18477E2FFA4
-:10AA9000013A9F4B761F21FDD67B7901E63F0F6679
-:10AAA0007E3E0AED65ED307CFB3BC1B7DAF7591C01
-:10AAB00063D546FC3EC98F12DD9F207EFB0DDF462D
-:10AAC0008E63F87CDF7FAF91902E8CE8319C9C9C4C
-:10AAD00012F39D4A16DF258CE3FB24CBB18FF26A7B
-:10AAE000F48EA4FC42F68DED4B35EC7E3707F5D69F
-:10AAF000C5AE0339A6203A9E5F03F28EF6A3635FCC
-:10AB0000826A0BE63303F1972469FCA608BB18CAD6
-:10AB100077E791EFB2B1FD30321DF5EEF6A391B7B4
-:10AB2000E07CBB783BC09FED328D837867CCFC889E
-:10AB300060F89E24F82EB4F07918EB1B53353EF8DC
-:10AB40007EE3707C6B4CE1F584217CABADB705BF37
-:10AB50008783FE7DA799BE8783F9E6E820B9484D33
-:10AB6000E1F230497CFF660AF3D0F7002789EFE075
-:10AB70004C51984F89C17D2E9FCCF765F97986029B
-:10AB8000C1BF93145F17D6394C11FB3285AC97C601
-:10AB90004D677E6A9DCC4EE7148A9983DAC916DF29
-:10ABA0009D9876C96E69A1FA3F5F82127DD622CE4A
-:10ABB000430C41B7C0FA15FAEE0DF1A58CE761869A
-:10ABC000FE6E4A650A9773FA3807D2F702A3FC149F
-:10ABD0007EDF0C5F325561155877749BC22CE10003
-:10ABE000EFF6B70D24BF9D7DAA17EB401DB1E2B96A
-:10ABF0002F18D5BB4E7272F944D3827512DA7AF5EA
-:10AC0000782884F9303F364981C892F0E8A3F7DD0F
-:10AC1000CEF8398D22A6D207566EC78F27935EF7DE
-:10AC2000539C54027112EA7583C543F828C3E4CAE1
-:10AC300044BEBF1109F314364BEC38EE57A4F1F5BE
-:10AC40006AF3170223E0B9BD32B15E4C811E8FE179
-:10AC5000FB1E9154385C6AE7DF094AA0EF04DD2847
-:10AC60005EFB13F8772123EFF75FFC7E7E60FFC762
-:10AC700081DF0D8A0C7C8FD281E74C307FE753CE89
-:10AC800007FBCD77A72CAD4E9918A897636EA6A2A7
-:10AC90005FA1AF9743F49D0B3ADFACD57BBCEA9D37
-:10ACA000ABE2B9B98571163A4F9B6B199587762B34
-:10ACB00023D15D9D42751F5B6EA14914EF4457443B
-:10ACC00080CFADCC3919F11CA8D7E3DF4F1A38CFAC
-:10ACD00094C0E8FC9FD5CCEB199F01B9C0EF178158
-:10ACE00054A958D7C29E28A1FAC7A7A22D0E3C8707
-:10ACF000604678AD01781B2DA2EE475777D96833AF
-:10AD0000D0F7381B59389DE79E15E6FE1EAEFFB101
-:10AD100088623A2F9DB56D5A12F983B0DE69DA7AEE
-:10AD20000D83EB10B1FE0F9FD3D7FF69EBC2E3EBAE
-:10AD3000F85EBBC097B64EBB76DEC7A9849CF7D140
-:10AD4000D6FF4C385FA71177E2D3E85915F5837E1B
-:10AD50007D1A3FFC3FDDFB356D605C0000000000AC
-:10AD600000000000000000001F8B08000000000031
-:10AD7000000BBB26CBC0F0A31E815964181826F126
-:10AD8000A18AD112CFE066607804C42C3C0C0C85FB
-:10AD9000407B23807424101F01E2A340ACC2CBC0CF
-:10ADA000100BC471403C07C89F0BC4A5409C05759F
-:10ADB000632B0B03433B107702713710EB303330BA
-:10ADC000E832136F7FB10803C31309045F5112689F
-:10ADD000A734FDFC3FD8F00C7DFADAC76DC0C0B0D7
-:10ADE000D402C11703B29759A0AA596E81DF8C15FE
-:10ADF00068F22BD1F8ABF0E8DFA787CAD7D340734E
-:10AE00009F160383155298E86BE0770B3ACE04EA5D
-:10AE1000CD0262009F3090CD68030000000000006A
-:10AE200000000000000000001F8B08000000000070
-:10AE3000000BE57D0B7854D5B5F03E731EF3C8CCFE
-:10AE40006412420810C2092FA30D382121058AED92
-:10AE50001020A2458D8F2A54D4098F24E435011F78
-:10AE6000176BDB0C04232068B058A2463B4150F01E
-:10AE7000061D6890200107B01A7A7D04AFF5D1F65F
-:10AE80007A8352400824E20BBD6DFDF75A7B9FCCBC
-:10AE900039273340FFF6FF6FFFFBC7AF3DEC73F67A
-:10AEA00063EDF5DA6BADBDF61E990C24D20F08F9EF
-:10AEB00016FEE873A644087DD5F774BE4254924846
-:10AEC000487D0E2DA710923E8A84884048410D2D62
-:10AED000E711F2D06D2464CD2464FFEB16FCBECAEA
-:10AEE000CFCAB45DD87239FD3E9ABD7F2C8BB6A314
-:10AEF000EF1F3B2762BBE02C12DA4CCB4984F636BD
-:10AF000092D021FCF82CF036D8C7D2FA4DB7598828
-:10AF10005525E4513A0C9944888BF8EC84365D351C
-:10AF20008AF5F7C82CCB33A2001F2369F36979F5A2
-:10AF3000F492FCD5B4B446667035CE29792648FB28
-:10AF4000F75846E23C68BDC79CB4DEC3EF9792D584
-:10AF5000B4DD86B916A1249BD66B566687B2A3F3DF
-:10AF6000D79E7389C4DB05AD9689F0F4F1674481FF
-:10AF7000E72FA658709CB5350C1FB49E624923A4D8
-:10AF8000B5F380CD4FFB5B5BD97AB8907E7F709430
-:10AF9000C54B31481EEC3C60BF848E1FCCB3784754
-:10AFA000D3DAE95244F038A3E34D2214F009B49EF9
-:10AFB00077874D75F6AF4FFB9D0AF35E43F12E6622
-:10AFC00046DB8D073869BBB59464613AEE2F65EFB7
-:10AFD0002118F797D7240B4112AD77150009F5E634
-:10AFE0005A4884D62352AF8DD071564F79DB369AAA
-:10AFF000D65F5D64814990B55EEDBBD74EA0BF19A9
-:10B00000630E8D02BA5E45BFC33CB21F990DF37E3D
-:10B0100078BA4200FFBF14683D8AE2C662E5870045
-:10B020009FAB8678E03D7DFA62E1B54DB0211C64AE
-:10B03000CD0642F20980807FAB7DA1952380BFF2CF
-:10B040008817CAE95EDADED9BF7D976045BA34CA8F
-:10B05000C1C180BF78F41BC5F1B93A6B891DE841C5
-:10B0600048435AD15842D6039E6050C9AF5EEF8A1A
-:10B07000D65F2930FCAC93894FA0F34BC85342CB29
-:10B08000289E2DD99E39305FA75F2157D2F22A2101
-:10B09000385804BA8C55C86615F9C23E9A96D75EE0
-:10B0A0009AEC05FEAB17C269127CBF867EA75D1EB7
-:10B0B000281A3F07F8B3C9AB203F53FE3904F85EA6
-:10B0C000EB4F26AB55FCDE89ED9DA33C56C40485B1
-:10B0D00087E26500E525C06BCE75F5578D04FA4C07
-:10B0E000B0788042AB85A9EA7C909F249B07C697E5
-:10B0F00027DC80F49307260B4447EF9F03BD299E6E
-:10B100006AD5A29FC3BC9EC8FB286934ADBF26E7A1
-:10B11000C546A0D393F7D8907E4F4EE85C0C72F5ED
-:10B12000D8B9DCF7FD28978A7733EDE7A99C6399B6
-:10B13000840EF8C8CC8F92007FC34635DC49DCF41E
-:10B1400039ABB7968CA3F09186A20599C827C28D1A
-:10B1500014AFC3962A44B5315A7E4BE03BF185B318
-:10B1600059D949E7338CD3B9B5F36D5B31F43797CF
-:10B1700044C6B8F1BD2D3539AA6786E591482AED58
-:10B18000FFB185AFA29C3F7959AA97C9791AF24BB2
-:10B1900006EF271DEA53FD926623C104FA1CD6D19F
-:10B1A0007B03C0352CEBD85C8073FF1BAF0A40B724
-:10B1B000A7C6A5AAA08F92FC9DA48BD27D58F6BBF2
-:10B1C000F7413D97339456948DF5FF82ED4CF03F57
-:10B1D000A9FA3601DEB6093587803EC11C8B97D1AE
-:10B1E0009BE9C13577A586408F0C73FCF17A710419
-:10B1F000F20121A9143E0F4139A91722B691D0EED0
-:10B200005ED66E38090980E76159C1C5A21BEAFB09
-:10B21000852257FF715B4123827C504E077EDDAE55
-:10B2200090F2A21872F03297E77A81CC467E26D24D
-:10B230005F816F862731BED1CA4F013C74DCEDAF10
-:10B2400024FF309BC2F3ABA52372440ACF43D02E18
-:10B2500086DCACE572E0E8204181E275FF6F7F6B30
-:10B2600007BC6DB79032A83F352B6CEBE274057AC2
-:10B270002C24ACFFA6EC8D36D4174216F2DDC28921
-:10B280008ACF3E0EE46FB9E0A7EDD33C4C2FBBBC98
-:10B290004A08F4B22B2D2858283C6A36F16CCC644D
-:10B2A000DD0529FEE6C13F80D125567FCDDAA4D049
-:10B2B0006AFA7D5E361534C01BC595858EBB80B09D
-:10B2C00079CEF3D62F06FA115264017CAEF630FA2D
-:10B2D00034C138742A4DE9AC9FB57793D072E0231E
-:10B2E0000F6B3F0A9A50BA8DCA7BF15F04DA6F3A4E
-:10B2F0006F07720FED12D242360B6DA7D65808C2F7
-:10B3000027450E0940F7B1A92AC0D394E6FDF759A5
-:10B3100000FF6CC9BB917E1E0570D07E9A6A2C3EE0
-:10B32000D417794A33E8E9D53EA6E7357C65F27152
-:10B33000D3BD1181CE9D64523D8978F245EC1E2823
-:10B3400067337832F3D8BCFAE01FAB8496D3C6E9F2
-:10B35000B608817A1A1E4A787F257C1ECEB4D04A60
-:10B3600009E0CE6370D37519E149CF569A410ED2E8
-:10B37000D3587F2AC58F867780CBA1C19547EB83B1
-:10B380001EF62ACDC00A0E0E5F49368367FFEB6FAB
-:10B390007708AC3F942B0787D7C1E74F00DE54AE48
-:10B3A000D7697F2D72441069FDD004A26E64A3A9F1
-:10B3B000527EF4FB2335140FB4E0E4E390F5569489
-:10B3C00007FA2AF82DE583F90DB49C15958FD12B3A
-:10B3D000AD067971F27993062647946D22D02E93AB
-:10B3E000B0B205CA741E25594639235E5D99C2E183
-:10B3F000027EA7FA67D92485F1CFA5CC8E214457C8
-:10B400000FF87C82FAF41AFCAEE0BA9EF153C50044
-:10B41000DFB09AD40211F449C7E3375880AFEE2267
-:10B42000163111F959E8D35F74BC1D4B227698A4EC
-:10B43000A3A32819F09651935CA0001E3BFC5876FC
-:10B4400074D4F8F0094BD378428610DD3899A05FA8
-:10B450003D152D14AFA4460983BE9EA087937ECFD1
-:10B4600078A5E17AA0D7038B5F1D0CF29B6A6A3F37
-:10B47000CE3202E574D82BB4168E7FEC67507F1560
-:10B48000D7270E80783C3E5F81E73027D5B3544FF5
-:10B490006750042BE3A3FA62F5A5EFE6F89D9C7FC5
-:10B4A00092F11981A759AFE8EA5FCAEB0785F3D695
-:10B4B0003B86F53478CCDFCF0816D4532EB0332931
-:10B4C0007E1F269E39B82E7B2DB82E26F0F761EF11
-:10B4D0008102A4679878854CD0B77FB5EAF9E02758
-:10B4E000F012F4AD14463951321C681F52394E80A7
-:10B4F00075AF49AA2983F7E1740701BD7060C6AB37
-:10B5000002E033BDCD3F1CE450B3730BBCE1347893
-:10B51000FFE021FF25289F71EC46CD4E34CF67E830
-:10B5200015CB511F0CF7F776C07AEFAC94BC5702DD
-:10B530007FF9295C4ED4932AF92E85DF1B5C067AAD
-:10B5400056F5D3F220FAACE4CF32F67D556D59EEC4
-:10B550005129DAEFAA51D41EA57A717DE77ADB353D
-:10B560006067D45854E0DBB5DEB76D3E27940B0618
-:10B57000009E5B8B34BB2F22C078E9EFF8D0CE9BC6
-:10B58000E0513CA0B4C65A23833DBAF5A269C6BBBC
-:10B59000E3010E721325E2E0F874A4F3453E8BB785
-:10B5A0009E002C16DD3AB23F6B07AE2F6F904B9189
-:10B5B0002EDABAA2AD23D823D52FF3B91C3DA88625
-:10B5C0006D02EA2B2ABB943EF3B91E7172BD49F598
-:10B5D00030D3737C3D59BB3815D7134D7F826D0D29
-:10B5E0004A623ED7B76B739E49BA86C2E4043D0BEC
-:10B5F0007A298D14C0FA3B1AF40CE8272928C07860
-:10B600004D133C6435AE63467D3ABA86E9C107D333
-:10B6100008F2135D879A61BD6B4A0FA7413F4D3514
-:10B620000704BF6EFDD4D63B574D27013D382F8F01
-:10B63000AD73F3B2D978BF07044D60F0825E35AFC9
-:10B640007BBF98B203956502B7B7CCF8172CCC0E28
-:10B650007C78D6DB88C7B50B1EC12769D880FDA5CD
-:10B66000D9180D56651DC0F76BFC96996077AF979A
-:10B670003A578EA2F0AF9F394F09D2EF6BBCCCEF97
-:10B680005A3D65DE33B0AE592D0A83ABA60CEDD51D
-:10B69000040ED706E81BFD4405FDA2BB6FDBB872A4
-:10B6A00004ED278DFA31820A9542362BFDEE049A7D
-:10B6B00082FEF64718FC5E524062C0FF1F8283F98B
-:10B6C000A1FECE8ED1484F8B07E04DF0F6DAC04F89
-:10B6D00054A91FA6AA00AF6A1F8BF05A3CCBD468AE
-:10B6E000FBDF717FE17658F8C1BE9FF3EE4C90AF5F
-:10B6F00075B731BFCC0CFFDD53431D161C87A05B13
-:10B70000E78A83D7B9A0C140FF784308972B8BC144
-:10B71000755460F47AB8B3E02AF4938AE87BDAD1FE
-:10B72000239D23EC20DFFDECCC840F73D0DE31AD04
-:10B7300033172A0F33E9FBB1D6F0D5C86FDB2CA83D
-:10B74000A708617A4E2016F5DB91B08830B890F5E5
-:10B75000A8FE5E2147E62CA0F557EC7412C097C6F0
-:10B760000FE9BCCFD535940F62CCBB4310E3D19D1C
-:10B77000D9199CEE9D30DEC00BD39F4AB31DECB6A9
-:10B7800070A87E4839F81F35CCDF0D470EA0FE4962
-:10B790009F7E33FA295B9A53E72C00BECAF27901E7
-:10B7A0001D1A3C609FC4F213AFB6D8CEEBBFC7D30F
-:10B7B000C38D952BD0EF6DEC8C3DFF2916E66F877E
-:10B7C000A99EF466C71F3FDFC2ECE8240BE7BB1954
-:10B7D000AFA6E9D7336D5DD5D6D96112098ABAF51E
-:10B7E000F0268E3FF3BA49A406DB18C6E7E83F36D9
-:10B7F0002E6071880D532C185FD1F89CD64B03BC7A
-:10B80000D279A03D47F93004F6DCC3A401E526480F
-:10B81000DB6F26FDE1BE8D582E6A7E93F9FCFAC6D9
-:10B82000E3FEF5ED5C5FADCBB9C70E5DD1F1D28023
-:10B830003F026EA627AB5CCC8E9DB6538EFC80C2B9
-:10B8400051D52CA09D65D9674738CF6CA265DA75B4
-:10B85000C4A560FDD31E1B9603D6CE87BE47CBBDC5
-:10B860003B4582766496C302FC7A8CF32BC9A365B0
-:10B87000B087EDAC58D5BCFF76E8AFACCD4AECB4A0
-:10B88000FFAADDA5D77E8F964B3B640255AA362FC3
-:10B890005386D0F2A2901086724F015DA8002FC986
-:10B8A0004A08FCF61E7767EA8FE8BC4FD6DA884A6A
-:10B8B00041A97375A6DE44F1511EDA5E08EDCA5B3C
-:10B8C00004D088741E9B5F1D0CF3DA2A78C1BFAFC9
-:10B8D000D89260B0078FD1A9FC807E5F42E70972E1
-:10B8E000594A1A0A619DABDABC4E5175F18793B57E
-:10B8F0001E1C472B576DA5E3D076D5CF0B5E986203
-:10B90000B585F8410F9DD96D9FFDB413E6B74C196D
-:10B91000E382793DA040BDD250F18B7615E06B56A5
-:10B920000AE9F7F2A66605E25B012BB903FCDC8AA3
-:10B930002D038C70358A28AF4B926C1B419F13A747
-:10B940002FED86B1FDE97CB296EAD831D17239E8A3
-:10B9500043E4C39072BDAEFE703109F9B5628B68E5
-:10B96000B4B3F9FA1F3CCCE81FDCEBC2B89F46BF6A
-:10B9700025DC5FD6E8B72489D353EACD8F05CF43C2
-:10B98000400F0A4F03E08B3ED770F8DC53C8548851
-:10B99000BBB87DC423C4E06BF3B34126C5C0BAFF76
-:10B9A000BAFCFAA9D260741F1643E4C9B362CED4BC
-:10B9B000E9B4FC3B4BD1660BEA0FAF0A72A4F9D98C
-:10B9C0004F59985CD60F56107F0D33F29F66F109E0
-:10B9D00082EB5EC38C9267C02EA0EDB759500E6902
-:10B9E000FBB1F1DB7B0A271ADA7B0ACBB4F63BB159
-:10B9F000BDEDFCED1B0A271BC72F2CD7DAEF45F84E
-:10BA00009DE787DF73E514E3F8575662FB8095D115
-:10BA1000AB37C98676CD0ABBD727313B2A02EFA5C3
-:10BA2000E4311BA19EA8F103E9F481FDED6C491AF4
-:10BA3000BF9AE8F9A2E00D80C345A545CF17891349
-:10BA40001D067E4CF2251BCAB427CFB1EFF0320C95
-:10BA5000E2B6213CCA1005F5C5D4213684F79E7D97
-:10BA6000762CDF3399C17BCF1027CA19AE2D948E67
-:10BA7000F728FECBF5762BAC4C104A7A53F47F04B2
-:10BA8000F88DBE572DF0DE21921AD4CF5682FAE8F7
-:10BA900081CCFCA7833AFCAC1C46E94BCBA7C1FE8A
-:10BAA0001918C5EB03C34AD28A75E3D40F53666FE6
-:10BAB000CC66EFE73B61BCA21EC04340E91D0376A4
-:10BAC000A5791CEB888986716C196538CE37A6710B
-:10BAD000AC1965A6716CB337F2F77C9C3FC3BCE22E
-:10BAE0008DF3C088C9C6F96494E33856D1349F8C6D
-:10BAF00072D3380E361FFA9E8F6317CF379F91533C
-:10BB00008CF3195E89E3A4888A216E651D5E691A2B
-:10BB1000C789E3C07B1887A433FF46B1F69620FDA2
-:10BB20005FB613B0A715ABFF59E897FCC14E509F05
-:10BB3000A874DC41A0579271BFE03F2CC9389F2FF9
-:10BB40001D94FE4E3D9D839A5D80F6CE420E2209E5
-:10BB5000D5A37F5ECD797441CBF519CBE0D9362DD5
-:10BB6000AD18FCECF52E2FC44FCFB44D53E6C7B043
-:10BB70000B1636C8C7BA0CFCCBF55E01C9AA013F4B
-:10BB80008BDB015AF918D55F84EAAD8FA8FE82E7F6
-:10BB90007199EA69FAFE28D56F44D1C3BB0CDB1D4D
-:10BBA00093181E8F35B175E4CB7587658CF305C985
-:10BBB0003B59741E37F3692C6C4860BE028723C062
-:10BBC000E9D1BBDB1ADA88F4F00D05BB87340EA08F
-:10BBD000B8E2F54600BEA8B824637128D8473F5E96
-:10BBE000B9FD3750ED5DA178D8123ADFD9ADEBE45D
-:10BBF000A1B47C46EEBADDEBD4F5335BFE08E66D0E
-:10BC0000A3FF413F73FCB4AC1BFFD63263F936226D
-:10BC100045CB946E33C4119C1E7C5C352403BD6EF1
-:10BC20004E65F0DC06CFF1F0D983F4BADDC3DA6AF1
-:10BC3000F004EE934904D7A3AE81CCB81D88F5FC7F
-:10BC4000DABA6282EF76D9E62BA2F4BCFD5E11F17E
-:10BC50006886B76B5F82CF42FDAAAEC6CF64F02F75
-:10BC60002F04FF1D4B8DDF49908DA7E155E3835BCA
-:10BC7000664F1D7054576F8EFFAA014775FC726B9B
-:10BC8000D9F586F26D35730CF5EF585A6CF85E1CD9
-:10BC90005C64F83E7FE562437961C3BD86FAA58D99
-:10BCA000CB0CDF17855619BE576C59672857851F6F
-:10BCB00033D40FB4351BBE5BF65D7A1DC863DDEF70
-:10BCC0004402F6D917CE630F817DF5855342BFAA92
-:10BCD0001A788DCAE189DA34E4EF93B52A3ECFB4FD
-:10BCE000E5E2FE58C041E599AEF51BEA0E2D5B3941
-:10BCF00005F408AD4F75F813756F2D0B52DF7D23DA
-:10BD000004A929DF8B8D0A890C003F26B98FAF7BF0
-:10BD100045DDF7AE0B7C6FA40B566EFFEF6257EC60
-:10BD2000F73D42EF18B0EF821F5871FF269EFD408D
-:10BD3000FF869218FE83F6EC86F8864EEFBC2C3216
-:10BD4000BBFA72B1E065913E2B1526EF953B0617C5
-:10BD500040BCA052898CA9896167F78D17A6C00CD9
-:10BD6000827E98BC2C0A0D8DCA2FD26FA441EEAFF3
-:10BD7000B1F8F7817EEEDE2FB2FD81C8C10CD8A7E5
-:10BD8000B95CF4BD0CEF49DB405C1FDFADF50D384D
-:10BD90003A8A90F76B67E2F3F7B54503207EF4C764
-:10BDA000DAD958FEB0D68FCFAEDA327C7E545B83C0
-:10BDB000DF8FD62EC5F2B1DA203E4FD4AEC4E7C92C
-:10BDC000DA06FCDE5DDB88E533B5217C6A72A0D93A
-:10BDD000A32485DB7FDC5EA72B0796CFF23988F49E
-:10BDE000DF9D28D7DE3490EBB3CE2FC7809D7BF646
-:10BDF0007D2B06D1E3E1C9CC6FF1E9E7C3F5BE24A1
-:10BE000044E99FDBFFBBDDC1E863B79099E09FADDC
-:10BE10001AAD1088AB3B5EFE0EDACBF4BD44505F2A
-:10BE200086BCFA7DC4BEFE61CE832E4C27ADFEB12A
-:10BE3000C7FF2B7F5E36D087D1D77150AC61747B42
-:10BE4000DA0B74D3E18FD9653BB93E37E151E27229
-:10BE500067C6E7E9811A3E3B3320DE522516592496
-:10BE6000FAEE6CAB15E775B63D81ED637B522E2A79
-:10BE70009E57B1C5EED1EB87AA7092C7A82F067B5B
-:10BE8000F4FAE26CC7D36E90FB256916CFD15CE063
-:10BE90000F1FE70FC6775AFF55E14C8FD3D08FB1F4
-:10BEA0007CB64198C9F615D5C49B62F807DA734988
-:10BEB0009AE2394AF5C2C92D2313615CEAC7796059
-:10BEC0009CEE5A8F878D9BE6D1F365E55207D6D756
-:10BED000E08BD7EF3F1A3ED8F1FBD8C6624D10A7D2
-:10BEE00089573F2E3DA4CF15F00F48BBFC25AC3B36
-:10BEF0008E2C6DDD91B0ACF51B088B41EBE5F0BEEF
-:10BF0000C5301E6DA76A3E34B48B4F77891CD3E8C9
-:10BF100049F5E4953C3F843233D2D94F7B4CA4FDA4
-:10BF2000F548CE9510E7CD9454D477011888F25394
-:10BF300095AD4BF1AB88EE4E8C7B4ED4E45EBDE507
-:10BF40000F94E53EF93719E319E4CFB477FA5DE6CB
-:10BF50005F179022373819F35A2B66819EFCC4A2D2
-:10BF6000D9030DF930EFD3C482FBF9A7C9DBEE5C2E
-:10BF70009D5D5626F1F8E44AB63E07E97F303F6AF8
-:10BF8000A719D6EBD24663B984DC900AF250B25EB0
-:10BF9000861D5BB208D67BDDBEC96CC983F32E2536
-:10BFA00035F560A7AC96D93EEA3C0F918652B8AA07
-:10BFB000763D990FF66C4062FA5EF39F172533B811
-:10BFC000CB53428A8F7EFFB835F7E6EF11681FAA80
-:10BFD00007BD1674116FAC78CCFC9546F82E04BFE3
-:10BFE000195E42961BE0D0FAD5E010B70831F33461
-:10BFF0007E26093CAEC3E463AD64B45F1FE178D034
-:10C00000CA1B4CE526537D8D4F64CE279992FF11B4
-:10C01000D03F55B6DE42B4D308E58FEC683D255AD3
-:10C020006FC3F9EA59A19E88F59AA409F1EBD9A347
-:10C03000FD35C7EAAF6AD7B61783949FCA5F78D435
-:10C040000D41DF4FA48654887F556EBEDF0D783AD0
-:10C050002105DD40EF4F4262CCB8E07B7DF8F2393C
-:10C0600005F02390B529DE9F7BF05AD0D75F6E96FE
-:10C07000312F26B0C51AB1523EAE6E5D340BE2F7D9
-:10C08000B47C84951FF814F60D036D467A963FFB39
-:10C09000682AC489282699BD4D226877546FFA53BF
-:10C0A00021E8F100E9453E34B783F1CF25A3DC1741
-:10C0B0002B89FDBF6BF90A012E6781D6073F85BC2E
-:10C0C0008480897FCAFAD6932E05E2081D922B053B
-:10C0D000FDF2EF92EF821ED0F04142CC9EA8DBBA77
-:10C0E00061DC110A4FF7A67F730B06BF9BF1E1D904
-:10C0F000F0FC5FBDA4C6D73367B83F146D17C27696
-:10C100006A1BB37F483B7B56CA1137D89B95CDB28B
-:10C11000977228A9DCF6F4338F839FF68115FDB45E
-:10C120008A6DBF7977322D576C975366B1E93885A0
-:10C13000D4285D02F47F4BC747E950FEEBDF28EAC5
-:10C1400058F6FEA7C9517A546CDFAF90B1FDF137B4
-:10C150002DBC5FE972C6A04BF84821D82B755BBF98
-:10C1600052C0EFFA649F400665F66F5FD6FC1B5C19
-:10C170000F014F48474EA73EBAF5A357E4DA97F2AE
-:10C18000B09E07F4643C7A3DC7F572D52E174982FC
-:10C19000F8E7EFADA15940C7E7EF74C33C8E4B35CC
-:10C1A0008CAF9FBC3F15F6FFCAE460AA079FEC7DE9
-:10C1B000D9537723BF950A35A96C1FD33798C7CBBE
-:10C1C00007C3FC1636FD08E75742FCC877654F8A5F
-:10C1D00045101FFE422233B7C7908B6B64B6FF74C5
-:10C1E0007CA31592FCC871B0F3C1BE7E5BC4382B32
-:10C1F000218B711FEC6E2D8E4B9660F90BBE2F3587
-:10C200004AB668FEA1CDC0AF9B1EE804FA9C1CE6AE
-:10C210001B0470523C0439BE04D8EF170FCF18C46A
-:10C22000E8C3F20DB01DD5FFD3E03DD4EF94719F6C
-:10C2300050D78EEB4B36FE5D7C7C0AB703D6B3E35A
-:10C24000A96CBFD23CBFA57C7EF4AF93E8F84B2726
-:10C25000DF4CDE37AD62F2ADC97BE8FA99F0FDF351
-:10C260007798FC403B583F285C9141F87DFF4D0298
-:10C27000EA032B89C492EB4D32976BE3F700955399
-:10C28000880B50B825C86788F209ED3F19F18F7EF9
-:10C2900049C97ADA4E679F05603CACA744DFEBD60C
-:10C2A0008F52AE0766CA46F9274D032FCA5EAC947B
-:10C2B00049104CCBCA0FACE877576E938B60DEA762
-:10C2C0005A0EBEFB63CAD7A7C29A9C1AF5A7594E4D
-:10C2D000CB766C16803FCD727AAA8CAED6B1E49440
-:10C2E000BE8F29A7655DFF57F4A786B780096F54F5
-:10C2F0000F0E4FB2C4C79F590FBA6435A61EA47F54
-:10C30000EF90FCFE7CA7F19BC667D4421B0EFABBE4
-:10C310008F1F357EEBE3478DDFCCF334E2CDFC7D20
-:10C3200032186A14AEA2DD32FA2595ED6CFF86B69E
-:10C330007B75681EE2C787CB17697875688ABE1C53
-:10C340003295C3A6FA3E53B9C854DF6F2AD718EA0C
-:10C3500057B61D54589251C450CFBAF471F2710CB3
-:10C36000FB5E5B6702AD9F2A41E087F45E05F49CAB
-:10C37000BC9C9A66103FDB2BA2BFD5A3F6BA93E90B
-:10C38000FBFBEDCC8FEDF1F072122BF70E54EA416E
-:10C39000CF69EF7BED2CCED953D4EB4ED2F9F747D2
-:10C3A000DA4537EC077785583E6A7F78EA506EBAEF
-:10C3B00048BCEF2C2E384374662C05FFAD41F48247
-:10C3C0006BB860D92D6ED877EB691F79DD6CFA7E7A
-:10C3D000E12111CC67D2E3708F03B848D0270DCE8E
-:10C3E000E7F913F4EF0409FE720AE44DB433FB7A63
-:10C3F000C11A933DECBC4BC1FCB2F5BAB8968EFFA6
-:10C40000CB793F654DC6EFE5640DF25FB9491EFC7F
-:10C41000DC1F38ACC9430EC961FBDB84F9B15CEFAA
-:10C42000CE10B3AF9B4DF1DED32162DEECD9769115
-:10C43000D4C33C5B04DCE724C1812857D5A417F59D
-:10C440009D86976E901B25BE3EEADEF91FF9F70127
-:10C450007FBCF887714FD067F78B1F8CD903E55DE0
-:10C46000EF65FC81F4AF3F6DDFD7B88FD8B3CF8ACB
-:10C4700071AE9E7DAF65DC07E597AC18E7EA596EB3
-:10C48000C57D94E03E5768347C1FC6FC81BABD5F11
-:10C490008D6379922B904E7F96993F72B6FDBF3E89
-:10C4A00084FC91B3ED74566017EC4B40B909BC6441
-:10C4B00047FFBB67EF57F97EE73F6E3ED50AF12392
-:10C4C000FFB9C8EC1DC0AF492C1E1CD833E969C8A0
-:10C4D0006FAE6ADDAF409C7DDACB7F19077AB26719
-:10C4E00007B377CEC85D4FC17E9855F974B94CF14A
-:10C4F0007C06846708214F2BE3A705B363E185E140
-:10C50000A187E201E645F15206FA3D1E3E32947FD4
-:10C51000567C7C7A3BD363DFC53CFB285E041F7BE3
-:10C52000EF0AD9049C3F7BBFEFAB71A0674E8597A4
-:10C53000A13D72A1795FA1B07D96FF39F316221754
-:10C5400033EFB9FFB4F466FCFF11ACAF03FBCB4192
-:10C550007F3EDF750F969F777911DE8B94FF9FFEEC
-:10C560004FA3FB0E4A77F785E9FEC43FEDBC2F448D
-:10C57000F7439CEE2E0FEC2FF7ECFD0BC64DB5F9F3
-:10C580005F68DE2FFD3F3A6FCD5E7FCDA2BE934345
-:10C59000EB1F220DEF8C11207FF1E0613802562055
-:10C5A00090A258F6C84985C53F0A049627489204C8
-:10C5B000EEDF31BF6828B71386DE558276C6D0F429
-:10C5C000B5681F10495D0FFB71AF65CCF7B27CB049
-:10C5D000F1780EE535CF15BC6CF40F9F10880FF283
-:10C5E000868766FCB003ECD5F47411ED59FA443B30
-:10C5F000F615F74CF6BE5231F84557115D99CEABA2
-:10C6000030C5E8FF4CE7FDCD2023DEC9A1F0CFB057
-:10C61000C99E1045D15553FD12CCE7AAC10269D07D
-:10C62000ED074D37F949AF825FAB8B97FDADF84B06
-:10C63000B7323FB24018B1BE08F0374CC478E005BD
-:10C64000F14758FED76B9E1C96D72A7919FE92ABFC
-:10C65000BC184FE57E338405C05E919CF59D20B7E4
-:10C6600012A17E2F831FFD65CDEF8D8767C2FD6808
-:10C67000890FA9E15D4A17315F55D71FE243A3C770
-:10C68000DF4A078D7E7F2F3DCE98E891FEB94702A5
-:10C69000F99CC6EDFFE99F778A584EF74AB81FC547
-:10C6A000EDFFA9CE2409ECFF2BA4C322C865A9ADD8
-:10C6B000ED6A88D3DBBC02F2F525DD16F46F6C79E8
-:10C6C00002E23DAB51C2F2618B670218DAD77E6F8E
-:10C6D000D7A97B09C4877D0A1ADEA488C5E7FFFCB9
-:10C6E000EDB753B4F31AF89D906BA8FFB5A0894439
-:10C6F0001C144F0B25124C4C86F8AE403E32C477CA
-:10C700008D65F8FB7E6AB49F0BD58FA747FED1CF0E
-:10C710005D546F7D449963373C715F85B284CE3F31
-:10C72000FE6E3BC357E075121A8171059F58A4DB5A
-:10C73000377BD0CAF4C7AE3FEEC885B8D8D49EECDC
-:10C7400044A64F47A15F10E07EC159A22642FEC118
-:10C75000D9F69189B82FD821BAFC31E2325BB9FF02
-:10C76000FCAF904F419F3D9B48039CC3E821BD18FF
-:10C770008F0D6EB2C5DCDFBDC7AAC59B38DDE89F53
-:10C78000A89D3752315F2498A8A75BF7AC4FA471DE
-:10C79000FDE9007F1FE9F64BFE5EFC82BF0EF8DD6F
-:10C7A0006AEF2A8C751E6C25C7DFB507BEC638E652
-:10C7B00065EDCD16E0DFCB36590CFB8D412BF7BB79
-:10C7C000C693F100D7B507ECAE3CA04B87E885FCDB
-:10C7D000C140FBA78A3FC6BE95199FD03FC4C5F78D
-:10C7E00059599C7F8F1C9E0F78DD73DA86F939BB0F
-:10C7F00095868A58705E62677A6E2109DF392EF35A
-:10C800009F0FBF537B9C9102F03337111EC730F34B
-:10C810001F413E3EBB85E0F950F04B412F9C6D61BE
-:10C82000E780294AD6823F4DE5FD07FAB8CC256D51
-:10C83000DBFF15EC80EA76C103A9B3D5529702F16C
-:10C84000D6405B9208EB6E8EAAE5557AC6DEA493BD
-:10C850008B7D56966F7C70F29E5B61DCCFBA1502C1
-:10C86000F688EF955E37ACDB9FB5E726C6CA9BD747
-:10C870009EBFAE25574F97A01F827837F343768B24
-:10C88000C350FE9EE81F02F275ADB5EB2E6F0CFA99
-:10C89000F96D8CCF2E5ABF85FE3FD36FEF68FACD6E
-:10C8A0002F16E9E428CBD64FBF0D8AA5DF9608EAFC
-:10C8B00020C0FB92BD2307015D971C9207C6D26F73
-:10C8C000DB6AD97EDE0B3C1FB6A795EAB7CB75FABB
-:10C8D000ADD5867971E676C9360B5F172FA0DF429A
-:10C8E000FF3DF2B70DF45B8CF98EB631BDA1E9B70F
-:10C8F00071ED4750BF8D6BB518F246D36D17D26FEF
-:10C90000C2C09BC01EEE90BD0931F8671BB7BF5F68
-:10C91000E07978300EE8B95B6D6C7FF362F55CB658
-:10C920009DD1FB827AEEBF09CF9A9E5BB2533BE763
-:10C9300068E643A6E796ECA67A4E007E647A6EC956
-:10C940005E768F8359BF65F5D36F04EB574758FB6D
-:10C95000405BE686B9B4BFF13ED96BA3F5C747F596
-:10C96000DD04BDBEBBD5C6EE5DE8A7EF3A2E4EDFB7
-:10C97000EDE4FA8EEAB111A05FCDFCE16D37E61D62
-:10C98000EF9974BCE5D7202F6F88B86F78989F4BCC
-:10C990007B73D2F13CE0AF161BD3BF759CFFCED4A6
-:10C9A00006B1FF69AFB0F95539593E72752BB30F17
-:10C9B000AB5B84904AFF5938F96B05E05FB45720B0
-:10C9C0008368F97A2BAB4F9ED5F6BDC8AC1C1D3FD2
-:10C9D0002C98588171FB0512B1415CBEC259F8090F
-:10C9E000D8BF1513591CBF82BF5F74A8AB1EE2D914
-:10C9F0008B1E1370DF93F07C002DBFB1B47D19C680
-:10CA00006BCD79019A3E5F1432BEAF30E53336F319
-:10CA1000795E2F76215EC85B62CCBC8466333E3A79
-:10CA2000383E3689B86EF6E183E247CDEC8F0F4A87
-:10CA3000D15939A9D1F92F7A83CE2B2F3A2F0D1F37
-:10CA4000E6F96971E70ADE2EDE7C35FCF59BAF86E0
-:10CA50004FD3BC9F06BD010A2187E4425E0CE5036B
-:10CA6000D41BC1DF8A787EBF68EAE8417A3DBC9575
-:10CA7000EBF3DC86A9D30613C017A901BE29695CB4
-:10CA8000FCEA603AEF09EFABE36179FCDE64AB1FCF
-:10CA9000F647B7DA7B51AF697CF50DE7AB77391E06
-:10CAA000F70CA9C173AA8136C1037645206247FC01
-:10CAB0000528FEE0FC4A809F5F0C50FE02793AF8A0
-:10CAC000D8970C5F7B0515E2E385DAFA03F8A7F542
-:10CAD00073DB19FE032101F19F477A717FA4BA51DC
-:10CAE000F04668FDEAB6C598F7A0E95BFAE7D4D34B
-:10CAF00043C78F522C7EC44ABAF5AF82D7BBD6DA71
-:10CB0000F02EF0E7B5CFCAA459C79F59F4BF6F63A1
-:10CB1000D049C3E785F8F21CC7D336C0A313F0D5BC
-:10CB2000CBECA7C8D7788E46FB1E9082063C4E7B86
-:10CB3000FCDC79F13441C313F029E8A9F66211CA8B
-:10CB4000256D021990D97F9EB03FA997DB457B8F59
-:10CB5000B0FE9F14F0DE1233DF6AF3EEC7B771F850
-:10CB600015CEA5815F74B17CFB8D896FDFB4F7BEF4
-:10CB70009E0B7CBB5760F183F624C3FEE2103B5B47
-:10CB8000FFB7DA297FC3BED621D9BB51ED2FDF090C
-:10CB90007CFD02BB5F7F2EE9529808E43D6EB161D7
-:10CBA0001E19C23182D9957ABDBACD4E06DE9417D0
-:10CBB000BFFFC1BCFF78768D561E0BE341BE571BED
-:10CBC0001D2F2B3A9E59AF6B7EFE85E635E6EF9C16
-:10CBD000575F1E26E9C47DA74CC9FFB0559707775C
-:10CBE00033CF33A210A07DA5AB976D3B4F3D92E6AE
-:10CBF000C1F34F777A343E63F9EE453C8F7D86383A
-:10CC0000E53D583F3FF3B17DBE3C0BF9DD14D0CF7D
-:10CC100005329EE3FBEC7519E3B59F4D67799CD710
-:10CC2000BD71508238CD75A09C283EAE9B20A0BF20
-:10CC300002C7B060DF6C17B56F7C63703EB9708E51
-:10CC40002B6753C334387F3C7E4BA80E9EDE69BDF4
-:10CC5000296F021EA78A04F0D8E91B300DEE4FBAE7
-:10CC6000F34F04EF0FA1EB2CB61FDF410642BDC905
-:10CC7000BE81E80E4C6A5D3F0DE2A3D71F743AE116
-:10CC80007E96AC260BF519A2F89B4C4275B0DF3EA0
-:10CC9000E9A8EF4680B78CDA0B10772E6B6FAE7376
-:10CCA00043B949F0AAB4FF40D05FE8A6F3D8D6F85C
-:10CCB00069E177401E693DE826D0C4EA0536C1C562
-:10CCC00043F07E1DE6D9946C12F0E0D7B690406C2C
-:10CCD000ACDF908DF6BBAD89B6CF837582B6877E0B
-:10CCE000377DFACE8D20EFAF8BAC7D0BDBA72EA16D
-:10CCF000ED54E0DB4D8BB1BF454D0249A3FD95B529
-:10CD0000B075A0EC75D90BDF5BF73F86EBD82C3AFA
-:10CD1000DEE04CD0FB91E95026B98207CFA1548EBA
-:10CD200041BAF5703927534633FD21F032F71B34F1
-:10CD3000BBE95D3BCBF72DF12E5306D07EDE9C3850
-:10CD40003013D202026D9FE2FEF3518A673FEDF28B
-:10CD500030CFDB3838F163A54BB70E7D6667F75BE4
-:10CD60002D689B8AF90C0B4911E6335C3B89D96B22
-:10CD70006F5D610FC115076FC9BDE9F0FEE0155683
-:10CD8000B47FCF6C93918FCE0CEBC2F8F4F12619DF
-:10CD9000CF0DD735B1FBB98EB7B0755C7C92EDEB9A
-:10CDA00097BA142C1F6CBAB110D6B7E39BD879C7C9
-:10CDB000694FCE50A05CDA2C78D9FD454C3F6AFE15
-:10CDC0005B8987E52368FAAF8ACFBB5FDEA249DFC4
-:10CDD0005569EB8D49DF55C1BEB21B9EC6F701E216
-:10CDE000647A10EC7EA07BE46BE4DFEAD765027620
-:10CDF000BFF0717721E663ED15309E3FA95DF0C16C
-:10CE0000BE7ED9FBD610DAABA1E23B7E027AFC03F0
-:10CE10002B1154C86BA778A7FA61A2B5F78FBFA0F2
-:10CE2000EF3F396C834C18CA27C588672DFF336FD5
-:10CE300033CB63C93BBC3E15CE5B92E90350DF9612
-:10CE4000368AC4AFD31B9F08BE1B7FCCF432DE4FA3
-:10CE5000A1D12F4F692881756CA483E92575B30C86
-:10CE60003922E4108F93507B1ACFDF2EDABD2E5576
-:10CE7000A1F5EA79FEC7A2BDEB5245FABE0ED62F48
-:10CE80005A7F91C2FA5FB44FF034EBFAD7DA6BFDF8
-:10CE900069FD28BB8DFD8CDCCBCB17D98F0687367F
-:10CEA0007E3C7B7CE2BF9F5B0FF7C54C7C4BC4A4F0
-:10CEB000E3891FCF1AA9DFEFD09E5AFC35FF1D0B67
-:10CEC000F1E9F036F18F0EE2D3F145EB042ADF945D
-:10CED0006ED7B4092100A575C211A52A0FCB1E90EB
-:10CEE000E76A1EA7AD9ECEF6AD5A730EAF00F99E4F
-:10CEF0009527201F90A05F19908276900AF1F1D2B9
-:10CF00003CD6BE94B607B96B7D8CC921D5072AE8FB
-:10CF10008BEAA67585587F93A042FFADCDC5B8DEDC
-:10CF2000974D14097EDF7404ED8FB2B6232920AF2C
-:10CF3000543ED7C3FA5B3DC58AF7796972A7C9F138
-:10CF40005B32BFAFC9E6190B79FDF7015031E457E9
-:10CF50007C9D303FB54546390B4C6472F9D636118D
-:10CF6000E5F9E015B7A01C9ED92CC491E3690A9C91
-:10CF70004B3E1E62DFFBE478ABC0E598E987E34EE9
-:10CF800026D7D3E03BC8F14E81FB83CC1E34CBB116
-:10CF900026971792DF8A2D26798E23B79D52D74D7B
-:10CFA00030EE9D57D811EE69DFDFFDEE9DA87F645E
-:10CFB000CCFB98F6FD7B5341DF95482C5F49C3635A
-:10CFC00095C4F2D9FAC1B17E9932F8A2E031C2F12A
-:10CFD00084DD15D51F22F039BB872BB849463E3773
-:10CFE000CBE1DF2B3FFF28793EC4F9478347DCCBF9
-:10CFF000DA43FE5884E2E9B596A7314FF5F473475A
-:10D00000AE053C57ECA17C4BE77BA6C5C5EF7B0981
-:10D01000E13A53DE2A621E389122F937BAF472C916
-:10D02000F2902A5E70217F94EF60F9A4E52F7E3C98
-:10D030000EF34496F7627E55F0396E6F06BBC6015B
-:10D040005F974B2C1FCA2CE7373998FDD9BD3B6140
-:10D0500036CC43D8C2CEE997876F91810FB57A3F1E
-:10D0600074C85A3DDCBF0C52BE85FD75804F7FEE03
-:10D070005CCB83EADECAE4BEBC4D467FA97C4B3361
-:10D08000C6B1035B3EC53CF7692F6CC3F841A04DA8
-:10D0900034E63D6E112356CCCB148F58D93A65C86F
-:10D0A0003FAC6EADC2FDB6EA30CFEF33E5BF55BC45
-:10D0B000B0F7C520454DC5AF9F75831E38D9B9D986
-:10D0C0000DF8A4FD61DEE0F73F970C7951F1F37B99
-:10D0D0007DC67CC2F0AA98F98427E11F94C1EF7540
-:10D0E000707ED5F230B70CE079DA91FCA218F1FB32
-:10D0F000BE733BDBBE780AF2DCBB779C7A0AE0AEFB
-:10D10000FCEB674F413E13D967C77529F0DCEF3060
-:10D110004F586BF70B07F7F3B73E8BF9D5673EB067
-:10D12000A29F7366EFF10CC85F3BB3FDEB5488C759
-:10D13000DDB57706C62BEFDA396D1089A1DFB5278B
-:10D14000F065E822F2BBCD7438D87A10F3AE4EBF4A
-:10D150006F457DD697171AAE6279B62ACF076D89CB
-:10D160009D47AFE53156B7DE78DD15A09F5B993D51
-:10D17000D797D778A13CD077283D2FBF08BAB5F014
-:10D180003C5F13DD4EC33F287DC226BA7DD1BAF085
-:10D19000578FC3B7D60171F3402317812F2D4FFF4F
-:10D1A000E70EDF1E079CFBDB91104C63F40ACD12E7
-:10D1B000C0DEFB2203CE359C907B31DFA377AFD559
-:10D1C00003F98CE57BDF43F938B3F330C65509CF5B
-:10D1D000933F43FAFE585EB3C0E7B7C9C5F247397B
-:10D1E000DE21BF5475E37B9E47CAF856CB2F8D973F
-:10D1F00057DAEB18C1E2D0FCDC4015F593F8BD59C5
-:10D200007DF9A6C244A0D311439EAE366F737F1E34
-:10D21000AE37A3F9D1B1F376B57CC1289DD83AA237
-:10D22000E53F9F69E679D3F47DFA78C88363EB75AF
-:10D230002024BC4762C8A3961F7DCA61CA8B0E5DBD
-:10D240005C5EF485E0FDDFC5C7870E16AFD6F0D271
-:10D25000FDE7D8FA5849607627F54FE504DC1760FA
-:10D26000FEE91DDC3FD5F0A5C15B1F667643F716CE
-:10D27000E61F98E5B93ACE7D49297C9CEAB6FDE3E4
-:10D2800040EF741FD8CDF98DF17375CB1196774BA4
-:10D29000F57348AF9FF9FD12E6FE32787F81F6D82C
-:10D2A000FD055A3E8DD9DF49C9770BC07FB293D9AE
-:10D2B0004927C3E2CC58F7DBD8126443FE40BD8B4C
-:10D2C000DD9721BA1D681FDDE59AF87E620A3C15DC
-:10D2D000CCEBA95BC6F3807EE6C57B45EB5C5713C0
-:10D2E00080E77EC08F2ECE207BFC04EC3439AD2845
-:10D2F0004F54A3F0F6D123C542427AFA4B9174D031
-:10D30000E71FE61C97A1BFFF34C547FE5322F583F4
-:10D31000285CFF1914BCCBD4F876B556F6FF54340C
-:10D32000C433AAADBD1F827D4E5EB6E37EB8B8CFD2
-:10D330001EC4F8D853EC5E8D833BBF7A06EFE5F947
-:10D34000959570BB50007D50CAE314C7777EF5D425
-:10D350007F811D098DE9F8A54FD1FA603FB724A060
-:10D36000BDDFB323711CC4014A5FBEEF5AD017A5BD
-:10D37000A0FBC0CE7C6150A88EF6776C202B1FDB03
-:10D38000360CCF0554EC70613EE1C19DBBAA41DF74
-:10D390009F79218180BE3F2D77FD15CA813D89A4EB
-:10D3A0005945BB4FD5AFAB8B88A4EAEDB90A281B12
-:10D3B000F25B08E6B760FC8DF273455B229EFFD0FE
-:10D3C000D5E3F21C1CC2EF891A027247ED46D598CC
-:10D3D000F7CCBE2F4860FA2B60EDBD87DD87C0EA31
-:10D3E0000794DE12566E18C2E4B613EB2FD6F895EA
-:10D3F0007FEFDF2FAB1F4860F180683FAC7DB595B4
-:10D40000DDAF61A6EF4F13047E1EF72F97C4BA7FDE
-:10D410002206FCEC5E2E8104E1FE55B2DD8EF7F1B2
-:10D42000542A913190AFFEA2C2F63F2ADD9131908D
-:10D43000AFBE87EBBF4A072DD3F743381C501FCA36
-:10D44000C4D6F53CDEEBB4CB8EF7E155BDECF2A1D2
-:10D450009FF0E257C79EC8837CB504CC93AE7AF99F
-:10D460005F90FE55D6C8EDC0FFBDDBAD783F69F7D4
-:10D47000F64319603774CB918CE4F3ECEB5485AD33
-:10D48000867D6A6D1E276B974E8673BCDA39C3F2B0
-:10D4900038FAE28D0496D7D19CE0FB15D373C6FB16
-:10D4A000654ED6CE36DC9B586E8BADC75A402FE802
-:10D4B000E27862F45C610BF47B9A74D50FA124A925
-:10D4C000127A717FBC7C4B663AF8BB07EC97E0BEE2
-:10D4D000D50159457F109E7A7D7CA2D69B2BE179A0
-:10D4E000FAAC5C89C2D1D3FC69C91002F981F6D9C2
-:10D4F000B1F4D3DE8404E4A7729B35E6F9CDDF7284
-:10D500007EDB06F236818DE7CD8E8E7B400E2900C4
-:10D51000C714A78AF329A77E00BB276A4EAEFEDC9C
-:10D52000F622A901EB51F9427C2C22EB953C677F56
-:10D53000BDB268695EAE948B0AEB9B3E7E13A3740A
-:10D5400022C114B493244E43B27EB021DF5F928B8C
-:10D550006C802F851479241148DD8072EA20617C6B
-:10D560003AA919C2D6A11A02F1F1137C7FD62AA9D1
-:10D570000FE37D331D22EAF30BE1EDBD0437C26DED
-:10D58000956A8817ED8D591EB0C784A09F7C4BF912
-:10D59000A1AE76662E3B174E7C90EFE6260C3EB78A
-:10D5A000E7D5AFC13EA07CC6EEB1FA3E09D5D1F1B8
-:10D5B000E09831C6FF0AD87DF6E6F1FECCE940825C
-:10D5C000FB0DF79DC35FAF767F1EF8EB897F9D084B
-:10D5D000FB314E0F8980BD94E024918471704F9E81
-:10D5E00074522FBF6EC2CA23283B835EF34C317E38
-:10D5F00037F335F14A9FF7E94511DB7F6E6AFFF992
-:10D60000F9DA6BF808D8367A8FE646F1E2E073086B
-:10D610001678CF75013EC6B9BD754047A5F7C3FB67
-:10D62000001FE39CCC1F4C69247A7F2DD7C9F4D509
-:10D630000A7EFF34FD2B72EAFA231E1BC647577180
-:10D64000BCF7D5D7E226FDEADB25C06BBFFAF6783A
-:10D65000F51DB1EBBBE2C193101B9EA438FD07631F
-:10D66000D7AF7EF9BD37232ABC647A0382F3FCDC92
-:10D6700072AE13FCABC40F538B1957B0FD0013DD12
-:10D680001CC07F941F1CA374EFE1FFB275F41B1143
-:10D6900083FE24827C57CCE1A165E7600ADF8F39E5
-:10D6A000B8D337B1FDCAB977B138D18F6DA5E8EFDE
-:10D6B0001EE1F701CD6D647EF5DCA56C1F9194B180
-:10D6C000733E1EFA1F8C771B7442E97D5B83108AC0
-:10D6D00064C2BD3526FBB5EF7E9C450AD42F36C506
-:10D6E0005D347ED2CE23CDE7F67526E7CF85A4D76D
-:10D6F00005726F3EF7FE0AD76B9ADE0FAE235970A4
-:10D700006E5FB438BCB03F2AF273A6C4CDEEF323EB
-:10D71000BE61EC7E392D8F2B4B4D84F58D84F97BCA
-:10D72000BECFB2E42A7590FE9C9674CE81F783D466
-:10D73000C9DE34D083F2396AD751574D393782A8C0
-:10D74000BA7364D49E43E1963DECBE44C953444A47
-:10D75000C10EE4F7039094ABFBECAEB7281E96AC79
-:10D7600053F1DCEA4227B3337FE12ABAD33901EC23
-:10D77000CB895E76CFAD918EC19D6C7E7530BFCC6E
-:10D78000FE70D7295E2FDA9D57538B01E3385EFC7C
-:10D790007D07D1AABEA7823CFE9BCC7EAFA01F1EF8
-:10D7A00018FDCEA624E3BDEC0BDCAB3F043E5DC30D
-:10D7B000EF235C599B85CFD5B5696877D6D77AF1C9
-:10D7C000A9E1C5E66DC07BDF6CA3587F368F9FD97A
-:10D7D00015D496817C0AC9531381B22DBD8680BDB4
-:10D7E0006BEFC34F03E247E92BFBB16CF5B0DF8D64
-:10D7F000901B67219E697B524ABF2F71F91F073921
-:10D80000B1AB9719EE91B3A68D37DD3768C29BC6D1
-:10D810001FDB18FED60A8C3FCCF85B2B77AAB0AF83
-:10D82000BCF6AABE7B67107FD4BC67F8FB2DDB6714
-:10D830008B8B3F4F32DAAF0BF2EB6FAFA3AF1EE42F
-:10D84000FB8B0FD44E447CADE2F748DE5FEBC3A701
-:10D8500008F8A3F3B3660709DC8FCE7E1B823E9DDA
-:10D86000453EB87F167817F0273A193EAD6935B8AE
-:10D87000BF6673327C89CE20E24576327C894EC603
-:10D880006F0A2F4B80BF5C6C8FEF29FE0E007FD993
-:10D89000D2271BF0A5A4145C1CFE1EA3F8A370A441
-:10D8A00070F932E3214561F7536A7215CF8E7B948C
-:10D8B000CE1FD6ED0DB5049F03E3F88B235C6CDD22
-:10D8C0004CB1D4EC97011FC984AF2741929E4F58A9
-:10D8D000EA21FCA505890A6581C1411A8619EE95E0
-:10D8E000143D92E95E367503F0C1FA43B205EEA32A
-:10D8F00013975E6D380F2ACEF625A9884F3FDED3E9
-:10D90000FC60AD8AF45B0774847B40B9FF753FA768
-:10D91000E703FC1ECA555C3ED672797998CB491D47
-:10D92000BF3779CD4C9667959263E1F79545883E70
-:10D930008F29C91B260A850B6D6A159F78CF22791E
-:10D94000DF1A1A4DDB2564131FF049D2FBF786D886
-:10D950007D8D4583C10E4AD2EE5F9CA226CDC18348
-:10D96000B01189F91D5415A21FD36989754F559DB2
-:10D97000F7800DE2A1F1E049F0FA32EFA7E3253498
-:10D98000BAD07E1FE02F9AB390969D8D0918FF4B59
-:10D99000E0BFCFE2A47097EAE81DEF1EEA8DAEABC0
-:10D9A000125D949E1E80913E1F691C89BFCBF2A818
-:10D9B0005C84BFE3F2285F4FB57BCEB576DF70FDA8
-:10D9C000E8CEBBCCE0B7AE977DD8CE33C528FFEB11
-:10D9D000B9BE4D9E6EE4734DDF1EEDD3B7FE110050
-:10D9E0004FEAB9E9A8C7526E88AD77EB6405EF2D11
-:10D9F000AF1BCBE43C58ACB0FB4BFBEB018C539F13
-:10DA0000F58FD9087A54E3ABE584E99D20717871EC
-:10DA10001DE2F7DB6876F04AB80790EB57788AA3E7
-:10DA2000D8EF0FA4CE65F7F9AEE1F7583D44F98A77
-:10DA3000E0BDA75E7C5EED62FB13CB6DE3F13EB50E
-:10DA40003AA705F584F48135042687B47F9207E26E
-:10DA50000592ECEDF441BCCF2585E1DEDC3A671E92
-:10DA6000DEFB2E24E57980FE5FBA160C3F5F3E1D7B
-:10DA70009D28DE97E94929221F65E36E009E47969F
-:10DA80003D3710881B6E48A9B103DE26B9585CBF2C
-:10DA9000B1381FF148F17B9D6B60B49F41B3AFEE8D
-:10DAA000BB070BBADD10E75CF3AD2E662F91F420B7
-:10DAB00019A593F346ED774ED420C9D2C9FBF2D114
-:10DAC0008504F687FACB791C3DB699E9B115426C0D
-:10DAD0003DA6D9999A1E934DFA417BD60F9F69387E
-:10DAE000A7A5A4788177E119B478C1BE7BB1FED631
-:10DAF00024C4430DE081A45DDDE7BFFE6004D88F40
-:10DB0000F931F9CDACBF16F4ADE7BE54A0D3095935
-:10DB10001D3407F8E950ECF57CEA23973E0C7CB005
-:10DB2000E0B7A2A0DF4F293DB712D7D3927313F10C
-:10DB300059D63813F99E40145CE7871D6FBADB0D88
-:10DB4000701D6FE479004D7208F2338E37DE8DF769
-:10DB500095409EB7A8DBDF27792ADA97DA3D63C7BD
-:10DB60004377BAF5FBBB25BFB0FBC06E8DC75F2501
-:10DB70004DB1FD7A5843217E4A01CC027B98DA37B9
-:10DB8000BD11B07F365ABD41122D071FB1C7CC4F12
-:10DB90005CE29AF128E07D89CBF724C83971B27B29
-:10DBA00041E3F3391BF7186C02C37ED3E33C4F53B8
-:10DBB000F2BBF5F7BBF5DDC7C9E324C416E7BB43E9
-:10DBC000FB7D8338DFDD2C9F8378627FD7FC8484E4
-:10DBD000A89FD006F3A86A3C55FF01E289FB091C07
-:10DBE000EE133283FBC43356F63B3726BE38C1F3FF
-:10DBF0004716090CAF1A7F9FE8B377FC780F8D9911
-:10DC0000FF848D976E9844FBFDAC43C6385C25E5D8
-:10DC10001FE01B61E324CC5F171E99F430E4257DDF
-:10DC2000FEBA88DFCBCFD9F07BF7CFBC1BE6429C96
-:10DC3000E70D19EFEBFEBC6346228BF318E3D00B24
-:10DC4000DD6C9D3FC9E5BEE4DC6AE4CF3EFE68586A
-:10DC5000A8805C959C7B08ED99922D02DE13498289
-:10DC6000BDAF4E95381F4E86F6A70B9703BEA7345F
-:10DC7000E0FE46E966AB77B5D09FCE275DAAE15EB0
-:10DC8000F5D2AE35D82FA1F6548A6EBFFB04CF0370
-:10DC90002E3DC7EE07249E204903BEE77A27CABF60
-:10DCA000C67B5FBBEDB1E3ECDF707BA6E4DC648395
-:10DCB000DF109DDFF7997CF2F5BCB46B2283AB6F6C
-:10DCC0003E1B26C59A4F741E53B07D7752ECF1333C
-:10DCD000399E8FD596C1C90D52A6B07A250D772BE6
-:10DCE000A04F4A9A929205DDBC4A1B2B0C7918A5CD
-:10DCF0004DC5CA3C5DBF513A385E9B3A2A4A87CC33
-:10DD000087E42B973B61BD2F72B961BC8D8BF27F8D
-:10DD1000A2427F4CFF7C223764D4A07EB9D31DEB96
-:10DD20005C43A65B35C4954A1B397DA89D9CA7A37F
-:10DD30008F461773FB63CDA5F93F8178F263EC56EC
-:10DD400090F87AC744B7CCD8789BDC87B72CCC073F
-:10DD5000BA30DEBE63C8FBE987374E5F0D2FDA7B32
-:10DD60006A1FE502BE2643C06920F4C3E87F217C18
-:10DD700045C7E5F49F1A7B1EFEBE792C25416A3FFC
-:10DD80002CB8E03CEE2341DB79E6A1D19F5C66A094
-:10DD9000BFFFA1D157821C6AF45E70E031E4DF0559
-:10DDA000541E615FFE78C3DD86F5210A5F1CBA8FC1
-:10DDB0000A92ECFCFF7374FF440E6640DE57701D40
-:10DDC0005B474E6C7C30438FE725AEA90B812E64F8
-:10DDD000D3C08B5A3F8205DE0E15D72519E361BBF0
-:10DDE0005DFE809BBE2FE37EF58AA4C231B1D67D55
-:10DDF000EA174E81F8735DEDCC29106F93B9DD08F9
-:10DE0000BFAC05F6265C811EEB7EAD064ED7FB6BE4
-:10DE10006B307E4D6C41E2D19FF725CC2EFA86B057
-:10DE2000788BD64E91FD1E887F2AFC3CB22CF95788
-:10DE300066E6411C232527A8C3DF436E66D7AD499C
-:10DE40003BE0817C522BED1FE231B674E9AC719F4F
-:10DE5000929573844932CC474E09138C6766D3F789
-:10DE60003A7C2B2914CEF3F89B92CD8DFB451261A1
-:10DE7000769A367FFA06D7B307F8BAB41CE2B82907
-:10DE8000608759D01F5ACFE394BFAC2DE2789070D1
-:10DE90001DB326B1FA4A2283DB0E716B11D6D50869
-:10DEA000965D70C38E885793E1EF8F2611157FA77B
-:10DEB0006F0089D4E33D2653BBEE81F7BE04FF1605
-:10DEC000E0832F07777E28401CBAC87F09ACBF8D3E
-:10DED000623047A5F57F25F6E6403DF87DAFF79324
-:10DEE000D97338E42DFB75FB52EC5E4E551FD733CA
-:10DEF00097872F954CFB357FBE44FFBD39C1B70BCB
-:10DF0000E048F958C07D983A3BBBD7A7CE7573223D
-:10DF1000ACDF8739BD90FEC03F1DCC8E392BA9895F
-:10DF2000C918DFCCCA7DC530BED75096B8FFB689B8
-:10DF3000F2A3A4BB977594E4B300BF8C6EA0EFF579
-:10DF4000F48B11574B76E2F5B731F76134F8E8B846
-:10DF500004F0279E2B64EBAB890FF6080CFEA08B18
-:10DF6000FB5B2428023DE768F7054B2B5859FBBDA6
-:10DF700008A02285E3036D7F81AC6065BE4F1998D0
-:10DF8000C7F621CDF0CC697FA013E2FA73DA07CF90
-:10DF900087FDA939CE317F82E71EB9F74002D881CB
-:10DFA000770B78FEE3C7BF7B454EA0CF9DEF6CC4D7
-:10DFB000F3C6A7B9DCDD4E7AF11E763FF1F07DF2B3
-:10DFC00010BE9F073F3087E5B00C7EFADC48E8477B
-:10DFD000D7D0D26DAF84AE01B3EDF68EDEDF801AFE
-:10DFE000F0873D85B807A0B56BF3BECACAAC5D1417
-:10DFF0000F366E8FDA705ED179DB100F1FF4E58D6E
-:10E0000007911E7D78E2F72A6978E99B77E2CD5780
-:10E01000439C379E3E9BE3CCFA13DBFC607099F186
-:10E02000F4397CA276E4E76E9F3D91EAB78FDD3E3E
-:10E03000073C2B6DBD19D20894173794AB45FFF000
-:10E04000548A87D3C3FC970C047C740EB8283DFA1D
-:10E05000A19DE901929781F3D1EE7D3F78EF711791
-:10E06000D89DF53BDFCB806795D8B5F6168C6F8AC7
-:10E07000E80F9D6DBDE4BCE7C33E84B8135DFF4669
-:10E08000276A7CC8E677073F5F73476B029EAFB98C
-:10E0900063A968B8B7F98EA52CEF8E489DE36E3260
-:10E0A000D8EB2BE2F6037100733FF39716908F07BE
-:10E0B000C03EAB672AC6059E62FC357FBA4F847CA2
-:10E0C000E4C92B058CB74C3AAAB675D1F2FC5012B4
-:10E0D000FEDED1FC7B97E4C23D04D59D2CBE3748C3
-:10E0E0005C9CF333889F1C60EB389417837C3B7DEA
-:10E0F000AA5317EFEF966B72E0DEBDE06D4E1FF096
-:10E100004FF14DBE0FF0F712791C425B5777351671
-:10E11000631E6BF15C7522D0BD386CC7DF1F2CB657
-:10E1200011C941F558B1446CF01CA410C90E4F0739
-:10E13000B1C1337F39BB27BBA4F17AB40FDC138B99
-:10E1400014B8FFB6B8FDD92FA07DA914D9CFCEB58C
-:10E1500030FC14B71FFA1AF867A1AF08F30EBFB36B
-:10E160004531F87F63C3C6F2E56DC6724EC458CE22
-:10E17000ED3096B7C21D673A3BE2C05E2BAE131579
-:10E18000A7D839BD9704589B201E6C45799A56D163
-:10E190009E0FFBD1A79E7759E0FB9EBF30BFB7779C
-:10E1A000AB1DEF7BDBFF7B0771405EE10BF68DF073
-:10E1B000FD94239C0F71385A9FFDCE5651780CF870
-:10E1C0006F2F5EA6F9E9A17130AF17FFCAF2647A2A
-:10E1D000B75AF1F7534EED7EF679D8173BB575284F
-:10E1E000DA592F09410BF41B5CC5E86FE6D38A2D81
-:10E1F00046BFF89E44A66F7A0486EF4B1A8DF3BE95
-:10E2000034642CFF3C91F953F388EE7D26ECDFABB0
-:10E21000F569B0AE3E1DFBBEE1FBB95C3CF79CA2CC
-:10E22000F1ADC8EF6723AAEEFCD29EE8FEDD5D43A8
-:10E2300021AF02703122FABEC234AED67F5122DB4A
-:10E24000874FE1FB33BD6F88889F93A6DF2DECB32A
-:10E25000EB6A6B064FD7AD43258DFB538BC13F6AED
-:10E26000DA9F3A4FB7BE546E3D987A2BE62549F8AF
-:10E27000BB4C95739E7968720ABC17C3002F7C87CC
-:10E28000B85777F8376EA847EDDDF1A20EEFA58DF0
-:10E29000770F9EAE93D3BF952F3579AAE4F6C9AE1A
-:10E2A000899D8590275ED1C87EBFA922FCA31BE172
-:10E2B000F71749133B679A2F912291CA4FE5F61F32
-:10E2C000FD107E8F2BF0E4042FC043BBB809DE574E
-:10E2D000B47C8AE709569B7E47407BEEE3F4A5F5C4
-:10E2E00023165A7FF5CDCE32D04FB4DF57A07C2015
-:10E2F0006B23DE6FE23EC1E2B4F4FDFBF09328270E
-:10E300000A826FDE4A9B9E22E177AFC984791BF9AE
-:10E310008CF2AD007657EF66017FD7965A5AF937DF
-:10E320008049ED5B8679B7F4FB1DB1CE3B2F0A190E
-:10E33000FB31D3FFF79C7FE95F969E8FCCF506CC2F
-:10E340000AE2B9C4CAA554DFE9ECFCCAA30D789F60
-:10E35000A3791C0CC2E9F20D60BD5451BEEDDC6E18
-:10E3600020822D9FE7CD8E6465BCB710F895324AA8
-:10E37000C56564BA0AF8BE81CC84E74B42E42151FA
-:10E38000647A02E340DB12504F747BBA9E7902F844
-:10E39000AB652CC69F86F0F39EDD6A04EF79ECE155
-:10E3A000F1C96E0F2B97B7DB310FE6D46905F5E89D
-:10E3B000B2F04137D0A3FB79BB057E97F4D4F601C8
-:10E3C000059027D91D66F7FF9E0C0FC0DF7F8DB724
-:10E3D0006E99F581B64E1E817FC27A9AE8FB06D609
-:10E3E0005BB282E5910E1A509313EBF724B47629B1
-:10E3F0004A4D0EF829FF0BC935400200800000008D
-:10E400001F8B080000000000000BDD7D0D7854D547
-:10E4100099F0B973EFFC65669299C9249984FC4C14
-:10E42000420801024E42884851272160C054078AA1
-:10E430001A7F8AC37F80FC89B61B956E26266242AE
-:10E4400051C31A1110704051BA6A1B5CD46883CF53
-:10E450008068B1D57EB176BBFEECB223B088562081
-:10E46000A2A5B4DB96EF7DDF73EECCDC49A2747716
-:10E47000BFEEF37CE943AFE79E73CFCFFBBEE7FD72
-:10E480003F6786BE6BF5EECE67F017CC575C8C9D70
-:10E490000BB8BD1BA0BC58825757306671FA8DF679
-:10E4A00034C66CE58CF9E09FF388BC5B86FAE3B276
-:10E4B000F7FBF6B18C2D637E03C36779C0C00AE019
-:10E4C0009B4E689CC9D852858515273C17FA3E900B
-:10E4D000A6509931F87EE97629D401DF2FDB6864F4
-:10E4E000CCC4E8EF22FC5BD10BE5E25879150B199F
-:10E4F000980CFFB13DAE1DF4BF4A091F9492195B01
-:10E500006D62610BF4BBFA29ED776B5898E6D3F096
-:10E51000DC45637CFFB03EC6606ABF63EABA7C1E1E
-:10E52000FB34C65C0628C3BA87DED187100EFF21F4
-:10E53000FB695D6B5880FAB9A5B58A1D4F65ACF9CA
-:10E54000EED6CC65F03CDB7A4FE6B2A9508FF38073
-:10E55000F1AD8C7FCF605D7B00666BAA593807E612
-:10E56000B71CD69B5406E501293C19CB26164C2E28
-:10E57000E3EF53CAF87A7D71F3AB673D345EFD7605
-:10E58000ED7BF6EB548267031BA47AF6545C3DC026
-:10E59000A341C0A1E139781F078719CF4941DB6545
-:10E5A000580A75A4C3FC9A4E31B6014A4DFB2F1A86
-:10E5B00035FDB31EC6000E19498C99015F8F4AAC18
-:10E5C000AEAF84BE9B307F32B4C1BFABB1DC4EED89
-:10E5D0008E0AF83D7AC38ACC00B47BD801E52C01C1
-:10E5E000E0E930860E07A772D804E3244D8D96A982
-:10E5F000BEE23E5E9E6F2FAED992CDD8667D20D30F
-:10E600000E405C2AFBDFD401FC9E71066E40BC2CE0
-:10E61000D5F972155C2FF315F9611EAC95C3E1B104
-:10E62000B296092D25B179C5E6C7F1BB59EA0BEBC6
-:10E6300080CE82AF48DE3D1EA4DB217DC01A6BD7A1
-:10E640006C97681D2987226F8E41BCBF28B1DDD031
-:10E650006EABF4F19B63E0BBAD733DAC03CA6EC01F
-:10E66000935C86EF59A7047029DF3FFF8E3710CFE8
-:10E67000E549DE71F068DC5F29375A69FDB7FB6157
-:10E680003E1996965D3AA8CFB8BDB80CE91BD67D69
-:10E69000FB02787F97DD43E3655A39DEDDF705F34A
-:10E6A000D796E0F8FE3BDE80F18626277971FC0CD8
-:10E6B0008095CD49CF2E33B663ED12B67B3499F7F2
-:10E6C0009FA6936F9F8FE5325E76AE937CBB89F8F1
-:10E6D00036D1BA338CAC06E789EF4325B4657CFBB1
-:10E6E000A83EC4F13BABA514FBCB18CB9F2E4338FF
-:10E6F0001BFB795BC5F740A68EA5E37CE1BF613EBD
-:10E7000077EDABCC70C2F76F7F6E527429F0743323
-:10E710003688ED94B095E1B3B098B73789F6A5B3D4
-:10E72000327033B872B5EDCEEA7D2953012EC17730
-:10E730006586F8F8CAEA4B7140BB6F19F83A12F1D6
-:10E74000B813F103EB69BE00334F8DC35BDD790372
-:10E75000F6D77C4161A1A9B1F79FB79958A828566F
-:10E760006EA83F3407DB35B2C1F548578D7D1616CC
-:10E770008AA3F76F258D3CAE4ADFCD17742C984ADB
-:10E78000E49BEDB7217C86D62FC7F91F90D81E8653
-:10E79000F506168C1BBFF982535B8ECE339DFA892A
-:10E7A000B563DA76FDBFA7766C7A2419C739638F13
-:10E7B000243BC5FAF0BB2C99B5205ECE8674413D52
-:10E7C000ECE3331E5E7F96B19A3E6BACBDDADF9907
-:10E7D0003A030B13DC87A85F844B1078DBB6812FDC
-:10E7E0000C1E28370C1C24B8A8F4100F9F601CDFE7
-:10E7F00048EF180CEB604FFFDABEAAABC40CA83888
-:10E80000A4EEDF355DBE99502FEB34FBD9521EDDEF
-:10E81000DFC4561ED5C9821F347455CF8C2FF3F632
-:10E82000B1EF1B6BAA61FF9797F0EF8FDA9B8EDC3D
-:10E83000A7C4F811AC2317E1122D9B12CA56284F1A
-:10E840008E2BDB13EA5D09F5EE8472366FFFB92D6E
-:10E850009C2B7B19FBD4BEB64601FEF279667891FB
-:10E8600004E58D1D77D554039F6B2C1FF4C9C83F59
-:10E870000724AFC462F06BF2325F08E067F5460C24
-:10E880004B4B100E836FE2FE6FE897EC12D0B9B5D8
-:10E890006F5F98CAF89D27EEBB3E89BE6BE8FB9878
-:10E8A000BE1BB5FF621DEDE30DC5C7A81D00C07EF0
-:10E8B00002F0741393580A80345F09FC11F9646301
-:10E8C000DF275CEEB221035F1FE78367327DAF1362
-:10E8D0001F3C20D971DF45E90EFBB5C6E85D6DFF31
-:10E8E000D1E4817FC66E2C777DD1AE40FB7F6BFC7F
-:10E8F000641A03547D844DAE40BE1A9A80F2781B90
-:10E900000B4C4039F4DDC6710775D0EEA83EB283DA
-:10E9100001BC8A1D1B6A146877D416C99180874C84
-:10E92000DCD4CBCB69911D08CFE0A64709BE477365
-:10E9300022393A284F718479795C6407966FDCF448
-:10E940002C2F4F8EE4C8F07D41F0B99A6A28EFB1C0
-:10E950008FBC5FF31C9C8FABF33B31D697E54843EC
-:10E96000B2E37262871E2006FC70D1EACF9EDF03FD
-:10E970007058748F85F8D49ECFBF33CF4FEB0FFA0A
-:10E98000950AE0879CF4B91C237EAC901E9089B256
-:10E99000CB19C3872D77D0437C7E62CB3E94F71989
-:10E9A0008B4A88CF5F48F1B53BA6C59EBF4BE7CFEA
-:10E9B00076879DF36559E7A3F6F7DA48EF79D8CC67
-:10E9C000D703FB86F06B15F82817EB2977E8E89951
-:10E9D0006B9F4DFD7C28F9B69A647CB2A019F1B901
-:10E9E0002A89F48C5B77015F00BEDC2BE6DDBB6916
-:10E9F000422808FDDF2A313FF28D5E872F13F9C3CD
-:10EA00004B7F916FC7F5F69642199E3F15FCBE7776
-:10EA1000BE2FD31127177B77F17A95EFF4E6F3EF4A
-:10EA2000557993D1C1C7C97878C26E5C8745613E7C
-:10EA30002C2FAF2BDADD4E727B01CD97F97C99122A
-:10EA4000ACF7C4AA021DEA912A7E9442DF75587F72
-:10EA50000BF66F8DE1491DBF1DD79D867A00C87DDD
-:10EA6000586F9B33D08EF8043D600AE981420F68ED
-:10EA7000C7F5C6C197299169F8FEFF2338DD89EBF8
-:10EA8000FEEFC269047E11C4711B5B815FE8E2F88E
-:10EA90008580DF6629ACCFE0FCC28B720EDF2F00D1
-:10EAA000FE788B3DF000F6AF8EBFE8DE46D2FBD499
-:10EAB0007959FEEEE59A9BD8F07D96A8971DFDD07A
-:10EAC000B491811C3B6AE823BE78741EF3B623FF21
-:10EAD000D0B17A84A3AA5756DCB3E66D06FAEC9758
-:10EAE0000E99F0DC2DF932715DDD805713CAE1F922
-:10EAF00086D09EFC985CEC7584B6AE40BCDE50E2DD
-:10EB00000D7A483ED27E0BB65AA85DAF23C214AC34
-:10EB1000BFC2638799209E091F43371B42BB25C490
-:10EB200037A797DE5513434189F01EA4EF6FE6F433
-:10EB3000D33B9F917EDF7BB39BE8C6CC42669CCFE4
-:10EB4000687490DEC1888E98E29B32DF1683C32FF3
-:10EB5000C5BEB694475EFC17D423379A498F4499B3
-:10EB6000897617EBC9A0F9023E5F22FA50EDA5475E
-:10EB700032431BC83EF356203E1EB0F916D3FC7F2D
-:10EB800060F1E0FCB79B5997A90CCD0FD649FC4E1C
-:10EB9000CC87F53CC6503FBB5DE867FF5E7FCE8605
-:10EBA0007AC01B0EAE5F21A19880FF2D61BC7EC98B
-:10EBB0003ACBC768CF2C5927878D60AFB0AED9BE8E
-:10EBC000489C9D411405FD0504BF645B866C483775
-:10EBD00001FC2E19FBFFA3CD63C5327C3F05D10E8E
-:10EBE000DF17C7BE7F5FECDB45329F3F6BB378100A
-:10EBF000BE897CFD7D757E3D8FF9E2C753C749EC28
-:10EC000017ECB80F903E01EEE114D4E77F20135EBD
-:10EC100013E7EB320C3D6886FA456DB2E33E806740
-:10EC2000A0D546EB55E77B7BC6D095645F25F47F86
-:10EC3000D2D254A1E0FA85FDC1D669ED2FC60CB140
-:10EC400032D0C572364476CCB0F7C26E4DB4FB18E4
-:10EC5000FB8B31BE9DBA5F98474A98BFA02B8FA40B
-:10EC600020DE0212C79BC130B408F94EE2BC5578D1
-:10EC70001A9D3A01774E1789F0363AB9DC4984B7C4
-:10EC8000CB10C9C17E03AD46825362FFAA5C7CCC27
-:10EC90000CFB07E86E8B2411BD6EB9DB42728E99B6
-:10ECA000389E9B572779907EB719869EA67DF5AA38
-:10ECB0009121DECF9A875E227E55C8FD0A677F29A3
-:10ECC000EFC27667D238DD9F79454FFB8D4F06F452
-:10ECD000A15FCABBA95EE2FD9E69B77870BF36230B
-:10ECE000A461FCE6E07FB63180EF711DB7939BFB1A
-:10ECF000B5F6F019F8575F16E31B67191F27D8CF31
-:10ED0000F904AC74158D736B12DB00FD36E9241F1A
-:10ED1000EA4F4DAB27863A383D99703F3588293503
-:10ED2000E9C02E2C8BEDFF26DDB122B4AB1A4C1BB3
-:10ED300007E564AA3F8CF618437B0ABE5B8D1FE58E
-:10ED40000F877FD3C6DFFE19E7DDB45F4B170D31A8
-:10ED5000FA912E4AF87D1C3DE5C7E884F46FE41F64
-:10ED6000D52C344EE27E1A2C5B6A0643E8A769165E
-:10ED7000FE8BB4439139483FB6F23EB6049ECDA710
-:10ED8000B8FE316360D7EB68073B6A06737099CDB4
-:10ED9000AD6BA79E981AC3AF3ACF2B0636C968DF72
-:10EDA000A97A4B9C7D3961C1E4F8E77DF41DDAABAB
-:10EDB000385E045FE1BE51B8BCDB2CE41DC845E2FF
-:10EDC000CBCB7BC6935C44B985FC4DB57791DF21F5
-:10EDD0007F79C659759B13D6E94DADBAC9398D8F68
-:10EDE000437A3E1A49570C8767A2DC51DBA1DDDB71
-:10EDF000621DBD5DD40FB43585F30F45A2F28A5F65
-:10EE0000E8776DA0F929442F6B77E4133F56FD3561
-:10EE10000DC24FB542F8775608FFCECA2D46E68997
-:10EE2000F76785B4E506C10F1A5984FBB9F6427D30
-:10EE3000BC5FA79A856D588FFE1D7CF669BF6F6613
-:10EE4000A1590AE2B7FFA231FE3DEBE5EBBD5DE063
-:10EE50007DAB99FB7566ACDB257367155F6F4A99CF
-:10EE60002FFF7E94236FE9C9FFF01F024F2A5C2C0D
-:10EE7000CEAAC508EF24B4D7B0DDFD4682CB0990F9
-:10EE8000D7FB84DF6301DAA16D81CCC242048F3DE0
-:10EE900077816D387C37BC6AAE477AE97172BD45BF
-:10EEA0007D3FC7A9A732F98310EEED16D2BB01CC86
-:10EEB00053908E2A0A5439CAA6A01FEA633DE8631C
-:10EEC000506EBAD11AC0FE22A837407987E05F3B66
-:10EED0009C06EA4F2D47ED3C412F300EF5877E19F9
-:10EEE0007F1C1D3C156DBF49E8939C2F6C5E9544BB
-:10EEF000FC2846B73A46745BE237A03FE955C14764
-:10EF00005E0580929DD567E67C44E1FCE9D553130C
-:10EF100089EF1DF96C35F195737549CC28517B9FAC
-:10EF200084F52F1A43F7417999F0B3BE2A713D3128
-:10EF300078C046FD3418025BD1EFD0F0C2382F60A4
-:10EF40008CBD6408FDE869AC7FCD4C7EAD86643E27
-:10EF5000CF8657C7109FFCA93EF4EC8FC94F6124A0
-:10EF6000FDAD21C99342F53F4F6558DF65098471B6
-:10EF70001F6519B95ED960081739008EC7425C3F1A
-:10EF80003E868C06FB1FB091DE03D3CCC4F18F7795
-:10EF900067783778627039FEE024A2FFCD7A8EB7A9
-:10EFA000E02BDCEF794CEF9F9309E5632F967AC154
-:10EFB000B26467FD86B001E6D8FC30D7E796EA3C3C
-:10EFC0003B5B9137BD66F16AECD18756D6627DF323
-:10EFD000EA75D7211F1C6D3F233F8FF7E79E6143E2
-:10EFE000B9648FD617F48561DC330313BC243E99D2
-:10EFF0001B900D7462E76D4FE801DE485F07F44433
-:10F00000BF97DA3FAE17ED43942F384E33F0DFA8A9
-:10F010009F99F86F5C591EA9CCF1D9FC6A86D0DFA4
-:10F02000B4F5B7A604CEE1FE6AFA87DF1F6D25F8B6
-:10F030000E11FF633DDC7F7E42EF5B8474EAA80E15
-:10F040001B96C4C9EDA4542ECF971A859EC7C286BD
-:10F05000F87DA7D6575469E95C7D9A5339BDDB0624
-:10F06000391F1F5EAF13FBE13B46945BDCB503F633
-:10F07000F629EEEF484AF550FD8C5361C35228E75C
-:10F08000AD0B1B568827EE0B8077D804EB3EB1D52D
-:10F09000C6F7338001FB59319D91BEB242063DB5A2
-:10F0A0000CDF7BFA238097932F3A387DFD09A0026D
-:10F0B000F05ECC443B23E8B5C0B75EEE94C2A8F73F
-:10F0C0002FDE62DC6DCEC77DEC936D88CF1D12F113
-:10F0D000ADC59D95455BA1BC7AFF64C27FF2744EBD
-:10F0E00097AB430E927F33041F5C6A0C1948CF7EA6
-:10F0F00096FBF1A07FD2971BE0A3CCB2E17040FE5B
-:10F10000ADA18790360E31A34FF0D3BD71F1878248
-:10F1100038BEDE97F03DE8795AFA08AA7287F339CB
-:10F12000E6C9403EA7F2618BD33F2D95F050988100
-:10F13000F8057C723EB94F22B836B2162E3704BF9E
-:10F140008F8E2BE4C54939C8E59271133DE7A5E6DA
-:10F1500013DE56A3BC21BF3AB7FF46A38379A93A71
-:10F1600061278C4C07D70A3A6838C5C257C2780D58
-:10F17000EB58B8710A7FDAA6901CE4F2D024E21DA5
-:10F18000261E0FF926B998280787C9BD047997610B
-:10F1900010F24DE039DEDF8DF27EC6BA908C7ECF64
-:10F1A0005CBBAF32635A4C7F697EDF64F25C86657C
-:10F1B0003F2BB0A2FFA6F25937FA7FC15EC77D652B
-:10F1C00001B8EC42F9A2EAB76EBE5EB781D3AF5E7A
-:10F1D000F1B3522BE26590ECD9A13466477A54E141
-:10F1E000B9C306DF95E1777CBF45BF37B1CEA4B880
-:10F1F000EFAB5E35135F3DFF8A2D6424BD2390E79E
-:10F2000080FED23F32921E7AE6551BC9CF3342FEB2
-:10F21000B954BF005B4FF85927F01A645563D0BF4B
-:10F22000CAA479639005AA7A58A363347FB7A8CF9C
-:10F230001FBC91D39591ECC9F38EC8F7B10CF36163
-:10F24000A85FDF25F0DCBC7F56E9BDF0BED96FF5C5
-:10F2500072E8074A915E8DF25D37A2DF658EBC6E63
-:10F26000E86E5847638ED56E844FAAF3FEF53737A4
-:10F2700043F9D3FD7A66443CEF9955C70A46E7BF88
-:10F28000AB42FA6391B8FDB266AFB6DCD8A72D37B2
-:10F2900033E558248E1F3F9E6A739D9C44BCC37BFC
-:10F2A00011E8DB686C39B50BE66BFCA991E4514BB6
-:10F2B0006A20949A867AF9D09B086763DEE753D078
-:10F2C0008F5195F7278AFB9CFF01F3E2BCCF9B2B64
-:10F2D000497E9FDF6AF604E3F857B3A0FFDEDC5AED
-:10F2E000AAEFDD66F448BCBE765A05EA833436FEE2
-:10F2F000997400FFE62D733F25BB09B57628F7A268
-:10F300007E89DFBD2085DA517FDCC2E5DE69D01F52
-:10F310004D309F9308678C7BC803734CF09FBDCE24
-:10F320009A09C85F943F2B7EC4FF03D8559CBE7BCF
-:10F3300020CAA7B99FE75AF4F38C253FCF01E41BFD
-:10F340008DA688A112FAB9FACF5F115F5ED9BA848F
-:10F35000F4FA989E6B243EB2F2EE00BD7F7DEB3551
-:10F36000B4AE93B06E84CFC91DDC9E5B996D0DE188
-:10F37000FCAE7670FD77257C2749C3E19208874F64
-:10F38000B65FE3467C7FC2F878C13EAE277C621F41
-:10F390004C26FEE36949463DAF79CB359F22DF5AC3
-:10F3A000B943F6A21C67076CE41759B963F684E504
-:10F3B00056ECE7CBD44A84DBCED97699DECBFE106F
-:10F3C000F7AF0C5E0DEF959D977B709F1CDE61E49F
-:10F3D000F373989EC6F95FFD6799E85ED1B100EAC4
-:10F3E000ABBD06DF04DC6F9EED7BE6205C3F999FA2
-:10F3F000A5A3F6CF4BCC8E7070B4A6E3FB9592E23A
-:10F40000C7FD55BF65556DBC3ED2952A137E2AF3C4
-:10F41000D6A547AC44EF37A29C6BDCA127BDEEF02C
-:10F42000820F7F73B32B46EF2BE59E1B67C4E91B4E
-:10F43000CDDBBF2DE8012436C069A58093316F5D17
-:10F44000118EFB4DF4BFF2BE96221EAFF9FA7D106D
-:10F45000DDDFDBF97EF833C8FB8BE8EFCB766AF4AF
-:10F46000FBD1EC20D51F6DF232DF1E2BC5157D6858
-:10F47000E716B814AA2F400202FA52FEB076EF3B0C
-:10F4800030FFFDA9018B0BCA79CC578A78F50CD9CE
-:10F49000AB409DC42591FEC3B61BB93EA970BFDC2D
-:10F4A000E634F6F486B879E68AFE607FBAB09F3318
-:10F4B0001FFCE94D845F53EEE75378BCED2B8A5F68
-:10F4C0005907785CD3EAF533A48BE681F96C594986
-:10F4D0008C1F367B39BF1EC6575C7ACEBF5C43D4C7
-:10F4E0004F4D1AE767AA3F785B6B12F9FDB6B94238
-:10F4F000666EDF0619F2F3EBCA651E8F117A895F1B
-:10F50000F8D14CBED719C66B9857F68E83F2A0EF90
-:10F5100078672A94DF299FED95A16CF53DD9558038
-:10F52000EBF6EA45FD58F227BE3DB392F493EB7C2F
-:10F53000328DCBEA93C95E1FF4BDE75A06E35ECF76
-:10F540007CA927608C1A10D688C7411C1BF0655413
-:10F5500002D35D7176D3B7BD73534FC4CB4B1F97A6
-:10F56000FF688FF789B8C24870F0A6565E85F0BD77
-:10F57000FA2A8E87CF9EE7F6C76766EEE756DB7DF1
-:10F5800066E372C6EF52FD847DB9C8E7A3E5DB8A66
-:10F5900035716297A12F17F7D96F256D3FABBB74FB
-:10F5A00014BF5DD5C5285EFBD98F5ECE457EFBE9D5
-:10F5B0009E977397C4CD2FF13BF5798B3A9EF04B14
-:10F5C000A97E4A97885B2FF11AB93F70143FA5DADC
-:10F5D0009E6DE1F6D859E0EE4877EA7767EB937CC9
-:10F5E000A8579E6526E2674B0684DFD3E72B74A1FC
-:10F5F000FDA07E9FD0FF23827EA47E89EC734BC941
-:10F6000010F1D75526FF9B633C98B7E223FCCC450D
-:10F610003C4A48AF3E03AE5B11769E51F1DF8178E4
-:10F6200058DEA3C5638E4BC433EC2EC2BBA1C9AA5E
-:10F63000A07C48EF10FCFA7B3AB25F0C596E2BF2BB
-:10F64000A5AB8B923A312EEF4A4A9E827EF59CAC56
-:10F65000626A1FACE2741D4C67E4B7CA642D12F1F4
-:10F660005B3BF783674F6776CC03F9A98BEB0D6E95
-:10F67000E6DD22933ED827513C40AC5FE5EB482FB6
-:10F68000C8E73E934C442FD28044FA9DACEB5B8498
-:10F69000FD8E463F5B5CAA5DCDE9275AFE1BD1CFAC
-:10F6A0006E75BC61F413A038DE12B76964FA117E7E
-:10F6B000D74B6E3F5A1CF17B26D50F2DE17A6B4557
-:10F6C0007FB5266B589E42FCE1F3787FEA76D03313
-:10F6D000D11E51E38E633A167BB89E3E1841BBDCC7
-:10F6E00072B989E4DC0F7583F9A8CF27C62101B36D
-:10F6F0000EE4F7C863C8AFD85AE53F911A27EF0F59
-:10F7000070BBA1E96E1FBD9F35C0E57B73A181F47D
-:10F71000CEE67E2988786EF21B42A67C8ABB2C2618
-:10F72000B9FDA0D9C3E3289E768AA3FCC0C3E32C0D
-:10F73000513F6A64E7BD486FF556F23B24C6635EED
-:10F74000FA8BCCC71FC768FCDE521EFFE99DEB2178
-:10F75000BF46629C8D7569F7AF1A67396B03C0C0ED
-:10F76000784B369A090F593287334B3171F9329CF5
-:10F770000F90BF367DBA408C888744F73590249629
-:10F78000B344BD1ABFB195F8F351C35D94BAFFAD50
-:10F79000A4697F4DBEC33D3FC47C8651F31D82C624
-:10F7A0005AAC37A1F62CEA71DA206FD5B2CFECC192
-:10F7B000F84EAC5E01BDD1D42F89F15EBE7636889D
-:10F7C000E0B3923A7EE7069F95E2C99AF1E2E7A795
-:10F7D00024F4AF87FEAD1ED13EF8E3B9B30B296E1A
-:10F7E00029EAA50D3E98DFC37A6D7F0452F13D16DC
-:10F7F000D4F10E67D4FC70E3CC98DC073DC09A3698
-:10F800002D26FF1FF8B0B6E73218CB62FFD2807208
-:10F810005595E3CD2E9EFF90B85FD3D338BF07FD3B
-:10F82000353D8DE40ED76B6B45FC12F4D939B8B574
-:10F830009AD7F919C62F415FC84A237DE1F3930790
-:10F84000117F0B3E237DBEF982C2FD2EA077A07EE4
-:10F850006E1274CEFAF5246F553A582DF84FAF0357
-:10F86000E43DD2EB01695A90E8A225F706C0C1DF5A
-:10F87000A7F90A711EAADD9538DF2BD3B87DDC5CB1
-:10F880005CB5B508FB7F4A6228EF37141F4B47BDB4
-:10F89000A479E0E3F4E571DFADEA7F94E0B06AAF0C
-:10F8A0007EC4F55F99C6E39D4DAFBC48FEC1CF4213
-:10F8B00012EDE57A25D43D03CAF5F53AD4D058794E
-:10F8C00068F1CDE4EFAF33B071B0BEB1288F701ED8
-:10F8D0007BBF139C81F619FC93E0D536FF0A927B1F
-:10F8E000DBEA4C568C3B34172FB983E0604FF22192
-:10F8F0001C36145765E2384DF3E7D8294E00FA1547
-:10F90000D637DD7D0BF94DD4796DE8D7D7A0DE551C
-:10F91000017AD63FC1BC739CF36ABCB0FFC6C8FB7A
-:10F920004AEFB462DC7864FEFB5E3AC767A7E40F77
-:10F930005E5F4E7E4216EFF7CBEBE7FADC0D690611
-:10F940008D5FF8863485E0303338380B69EF352524
-:10F950006241BDB799F9BE40FB92F9AD9E3D842747
-:10F96000CE475C6D1EF21F995C911F5E86F53315C4
-:10F97000B21F98127904C73DD3EDF26E60827EB15A
-:10F980007C774908F9E8EB69812588DF0AA13F9E69
-:10F9900079E59A52F4B3A9FA51F72E7308E384DD9E
-:10F9A00036CF3FD4201FFC83C2E3E2A6A1C1598811
-:10F9B0008F3F3AA9DF6E73A81BF11FDCA4A7FA578B
-:10F9C0006C8146A4CB53F36B8A282FC71A2CC238FC
-:10F9D000B0DED5C3504F007381FC0926979F61BCF0
-:10F9E000745670B122219F4FD03B6689FC52629EB3
-:10F9F000F0BE4AB0B1714005274DB4053A2FA6C6F6
-:10FA0000F490237F5AA8E04B553FD199783CABBA8C
-:10FA10002E89C948F7EB87DED4A1FFDA3548FA6BA7
-:10FA2000639F44E33416BF40F9626B445E52343F37
-:10FA3000488950BED4FA348BD0033BB91ECD06C9D9
-:10FA40005E66CF717C3216A13CAA981DD14EEDD4D2
-:10FA5000FE0CC2EFDE28FC2E20C1A87E539AAA5FBE
-:10FA6000DEA7F5D78B71374B833E19E15A2A69FC23
-:10FA7000C5EA73AFF83EE5D0D01CDCBF43AFA87930
-:10FA80009C3C4F73EBB4895E549D86E571F67F31E3
-:10FA900007E906146DDAAF4DFD9796C7F9BCD86734
-:10FAA000FFE3799C5EC9B71B9E2FA739B4799C5E92
-:10FAB0000E3F35CE9698BF792633ACF07CACC8CEDD
-:10FAC0003D489FFD46CAF3AAEDFFD9FB281F6B4DA9
-:10FAD000AC0FE390897A469BFD3B61A4FBB3A74F33
-:10FAE000EEBC9F611EEF4B5ECAE748D01F12ED844B
-:10FAF000DDD82473747DEF37517C727D2F5AFE1F41
-:10FB0000D7F7B83E1FDCC3F307547EDE2CECB3B34B
-:10FB1000F5E79251CE1C4B53F5CF843C87A7449E0A
-:10FB2000C3C0C8790E8AC817027D3D4874B28FC71A
-:10FB3000758E3C6D21FE71CEAEEC467DE9B46DE86C
-:10FB4000FB082C45E8499D078C1EE417C0EF887F11
-:10FB500007F7E9799C06E33618C7796D8288E38850
-:10FB600078D1AB16D25B1A923D29F8BD1AA7F9A934
-:10FB700090370D493C3ED36509FC3E6D84B8CD2ECF
-:10FB8000A17FED82AEECD8DFFB4611C7060681F6F9
-:10FB9000CE83393CEE20E2366745DCE678B12E6C48
-:10FBA000E07E08F25379BA149609F59EF7CD210F3D
-:10FBB000F767997420F797AA719BD7B89F6AA988AD
-:10FBC000CF1C5F3087F28796637EBC8C7E0CEE671D
-:10FBD0008EE6EB33BB0ED7B306D8C5366431418011
-:10FBE000FAE5F05AD249A84F783AA14CCAB2AFA769
-:10FBF00006C65DD2A9237B646997D65F7E7EC31D4E
-:10FC00003528BF1FE8E4F1C7609744F27B29F3B9B8
-:10FC100051DF50E9615C7A2AD159B053E7C371AE24
-:10FC20004CE7FE04007D88D6279E9D7AE16717F396
-:10FC30006867BA303E75127F3E60576A4694CBA221
-:10FC4000BF4E7D8BA912F5D81C1DF979CF1B7C7591
-:10FC5000E427751611DE3A6D2D5D35BC9EF6CA7926
-:10FC6000F3909FEAAF54B8A2C73C4EE49363D245E9
-:10FC7000FC2661BDCB7BB4E5C4F8C3AA90B6BC94A6
-:10FC800005C667E23985BDDAF763D239FF3FBF2188
-:10FC90005FF8F9BDE4E7EFD47B7E958F7CAA5B210A
-:10FCA0003ED99ECDE1A5CBE1CF0247751DE9070EF8
-:10FCB000D02B68BE7CFE0557BA2494979D0E4E97B4
-:10FCC000FFDD7927CE77767A11D71350B9C37DD46B
-:10FCD0002D8538BCF8BC2FD55FB1225D6B6F46CB4C
-:10FCE000FFF3F626A7C76E59EC373BF19F2522DEBE
-:10FCF000785CF23E1DC6F756D00B60DE4BBBE5329A
-:10FD0000D44F667DC74AEB687ACD1C32427DE3BA98
-:10FD1000482EEEA3A6AA4851CB0870C5D92A2ADFDF
-:10FD200082764B5C601FE0BEEDD2C6A186C7157D12
-:10FD3000F7A6A7A11D727CDFCF10DFFBCC2497E0D4
-:10FD4000BF0E1AD1DFF14A3EE94B5352021DE9289A
-:10FD5000CF93C23B9FC947FD84EB478D03C65DA887
-:10FD6000FF2DE9D49EAB611BB5712ED6E5247F062D
-:10FD7000EBD5BEC7F32B9AEF86C5BDB89CDF6C08E8
-:10FD80004C40BDEEEAAB787CFDF42A1D43FC2E9579
-:10FD9000BD2B908F9C366BF5EED3368EAFDDE9AA86
-:10FDA0009CF116219EA3E56178F616219E97EA58EC
-:10FDB00020BE9F46C4F354CC4EE7783EFDE2E545B5
-:10FDC00088E7CFF75D5E8478DEACEFF1E1BE79C6FF
-:10FDD00019781AE17362B69FF42635AFF252E9B191
-:10FDE0003F811EFBFFDFD1635D7CBE5FA21C3C1C1C
-:10FDF0008597560EBA0C9E6CE4874B4CC6AF958720
-:10FE0000F837A23FCD64247FC46B7FFAF221946F50
-:10FE1000C10199F40FB5BFD794C058F417BCF6BE12
-:10FE2000DB1B9446EFBF45E8556E130BA2DF43D5AD
-:10FE3000F755BD31911FBF2FE0782ADD578B7AB679
-:10FE4000EA9FAD177D9A425F72FDF42989FCAF26C7
-:10FE50004F1FCFAF3FB0D88EFED95321EE8F6D7AB2
-:10FE6000B194FCB5AB42AF8731FF890D4876B41B26
-:10FE7000563DF57132C6B3C10EFD243D2EBE325B38
-:10FE8000D8A1A742C79331EE0DE3D7A05CB6B886E0
-:10FE90000C48BF4D609F4113D6A40CD1B9A22617C0
-:10FEA00023795FDEAFB5D7D4F8E436BF81F8DDB68D
-:10FEB000012984F659BA21909F8DF28965DB4F5A4A
-:10FEC00062FBE577E93E17C62D637161DFEF715E76
-:10FED000AA5F27B23585E830A2673ED203B6DA04BE
-:10FEE0005FE2F19ADF6D778478FE126FFFBB503EC0
-:10FEF000955579BD429CD35B21CEE921FF0E27F0B9
-:10FF0000EFF87234DEAC9E47037E1E1E29FE1D975D
-:10FF1000B714FF7D131B12F979178D9A7EA3F93A56
-:10FF20002DA51E98F79ADBAC740EB119E8BAB52C62
-:10FF300046870D62292A1D3609BF6E73FD31B20353
-:10FF40009AF1FC05EA555E4E870D601F617E67E2FF
-:10FF5000BE657DDA7CC6D1F6716986761F47CB7F98
-:10FF6000233FE6CC0CEDFE55D7AFFAC1A3EB1C90B6
-:10FF7000F8FE4A5857A25D99E8BF56EDC24BE56BB3
-:10FF8000DF89CE87C3235AFE1BF3B5DB3346E36B11
-:10FF9000DAF8C05FCDD712E30485DCFF8D71028CE7
-:10FFA000DBFE77E3049F7A7AD2753C4F5F133FED17
-:10FFB000925AAE338DC5B8228F2F37DA8C14874D05
-:10FFC0008CAB367BE68838E2E06FAE40B9B95FCFE4
-:10FFD000509ED75B5752BCB2597ECE80470E87C524
-:10FFE000139583A4B7FFB571F5F5193617F1230FF3
-:10FFF000CBC7B87A625ED1EBD62F530371F8AD2A26
-:020000022000DC
-:1000000001857F043A362941167F5EAD3783EBC107
-:10001000AF8BFC17B781E7B13F6C033B0BD6E7D63C
-:10002000F1FC9CBF4FF36FCE48433ECEE1F7C42BAB
-:1000300037313C77F484BE8FF844B0D1EA457EA7CF
-:10004000FA55A2E309FBF352E9FAC709FBFCC77FA3
-:10005000E37DDEAFD2F35F1BEFDA026BD5D03FA3B7
-:10006000B8D6DB18AFC91F4EA7A3F5331ABDFE22C1
-:10007000C3FF6606ED33DF14CABBBD447E62291F91
-:100080003A8EFE1BB6DFE8417BC224CE65B08D9967
-:10009000224FD25B319FF285F9B906F5FCC7687A29
-:1000A000DFC7D1FDCEF5BE8F47E53BFF35BDAFCDF8
-:1000B000E93F8E72F644A5AF08E5E20336983FDAD1
-:1000C000733F328E78CE423D0F00F4C4CF9B3CCFBD
-:1000D000E3DC8974F587047EF987FF257EA977FF25
-:1000E0008DF865FD1F93D1AF397A3F419EF75B359F
-:1000F000E8137129867121751DCD833CBF2C5DE409
-:100100004DA9EFBF127AECED6E5F861B9E9F7F605C
-:1001100032B114507190C650DFF25BC9DFDFD4C733
-:10012000F3409AD6318AEBAAE7289BFAE733D4EB5F
-:10013000F6A706F2F1FB073EB406E514F4832F6040
-:10014000A8CF9DF980975B5203E3B0BE795D44135D
-:1001500057A8B8F8E57AF457C07CC9FE7719B5E717
-:1001600029E6BB393F539FD7097847D7E5E2F364C7
-:100170007D7208F5408B6790FC444DFBB9725621A7
-:10018000FBC81FCFD638E97C44D3FECA523A6FDE93
-:10019000672E453DB6E2A35A3BFA1F3EBFD24579D2
-:1001A00004B9726415EA51AFA70566E27C6DE5A15A
-:1001B000B9A887E6811E8A7AEDE7FBE69606E2FC9F
-:1001C000D99BD19F0DFD6EB669FDD5CCC4F3C0EBB4
-:1001D00077F33CDF576C8139D8DF66339F6F7093BC
-:1001E000C86B167EECC4FDAFEEFBE839C75B4D145F
-:1001F0007756F9C2663D0BA05C53F94989C8830361
-:1002000078F03CBC81F93C9F4394AD2E6D3EE2A951
-:10021000F4D925389F12378F0B2C370D49E8575FDB
-:100220002EE2ECD7887C09353FCAA8F8BF8BEDD900
-:10023000BA9A587CBD00BFB78B73BF3C0FC67281A2
-:10024000EBC7057603D18D0DF617F93F806E103F91
-:1002500033870667E179A2C2DEF04C84E76B17743E
-:10026000040F65FEDB141F4941B4413F633746BAB2
-:10027000C7A39FC4FEEB2B112F9E1E7B15826E7FA2
-:10028000AABFD14DFEEC9662B41BABFE59CFF3FC76
-:100290000E58C8FEEFCD6DA03CBF331F1A473C1768
-:1002A000A23E83EC3ECAEB2BE87F8FFCF4B6FDD276
-:1002B00088F99A5D6E2B8F1F0507297F8CCD74F10D
-:1002C000F384073EA2B8AED2AD9087A253EFD3E13C
-:1002D00039A8603B23FFE4B85EBB0EF19227F247DA
-:1002E000CEBEF69F53026487A87EF910CFF7D147A0
-:1002F000D6A35DA5B447AE821DCC1AF73B744D253D
-:10030000D8DF5013CF5BB730A493BCFEB1F77D0BA1
-:10031000CA795D762621FF79754D1EF943619DE30B
-:100320004658E71D6E9E9FA31CB0E8506E299B188F
-:10033000E5172A8EF42A9AF7A350867ED608BA517A
-:10034000E38D305D37CAA3DBDD811D88EFE8399886
-:10035000D6247E0E469CBBB4B57EF83C9E2FD96950
-:10036000E0E70C0FBD366901F9E5BA1509F170DE59
-:10037000B138CF0EEFF78A7D6B530699DD1A0FFF68
-:1003800043944F597080E79D297A4E274AB76B17DF
-:10039000FAFD2EA404286FF4CACEB04CF12AFB89D2
-:1003A000476A3C7176CB162E479AF6727B39D14E4E
-:1003B000F926F971D0ADD54BA2E5BF915EF27682F8
-:1003C000DCF8ABED0FA6B5DB12F593443B6D985E00
-:1003D0009DD0DF687A8A9AB751151B87E8E1759B33
-:1003E000AA070535792D555671AECDA4ED7FAF8B9B
-:1003F000F30935CF25BDC3D38E79E3433F60E4478E
-:1004000053F36D8255DC2E08EA4C74DECDCD7A288C
-:10041000CF660C0B4B12E9F7113AD79981F936F0F8
-:10042000DD07EE027E3E8579BB64E2871E09E76D3B
-:10043000C63C0DCACB0C6D5D81E3DC60A571CC9828
-:10044000A7311543EDBEADC83F67D5F3384316C895
-:100450005BA4DBAC424E87E63A9EAFA1E663A8F907
-:10046000132A1CAA047CB3C6AFC847FDBF5B0AFCB5
-:10047000483D4F1B7F4E3A7A3E7A55019D27899E13
-:100480008F2B64A2FED2CE4927C253CDDFA8B2077C
-:10049000EC9969C3CFCBAAF41187379AD7B6035C1E
-:1004A0005FAFAA37D0FCCFAE9A477EC2B3AB740C15
-:1004B000F74DD58091D35BC278DBA2F76084CC7412
-:1004C000DF85C0FB37E9AB80CF62F4C31E6AAB990E
-:1004D0007A02607BB8CD4FCFB366A94FBE8CCE2BCE
-:1004E0002E42CEF465E6B65ABCA7E0AC6D2817EFF5
-:1004F00039F832EBFE6F53396DE8289693B39EFFBF
-:1005000036DE7B7076DCD04EBCF7A0705B25AF4743
-:100510001ACC62ECB2CC8A6F0769DDDCAF342B7683
-:100520003EBB1CE1D3C822EB07C97FC3F3F3319F65
-:100530000FF1E0B61A489F718B3C4A562DF22A31D2
-:10054000C202E58ECC528A475B9967FF20D667F3DB
-:100550007340504FF4DB318EFB7D4D02AF2C5BF5C9
-:10056000134582C89F3AF21DF47D948FEE3786B80A
-:10057000BF8A8FFFEE8B93297EA4E6873266CF5920
-:100580003899F2493465F57E03A6D873505FE8D0F8
-:100590000BBD5494535302F333E3F4A27767FF5D2A
-:1005A00009EE83D32FDD5B887CE91A03E8ED23F0A5
-:1005B000A17FCDE27CE8ACDEDA25819EF65E72E0BA
-:1005C00016ECE77DCBA2390E58575D6AA5C181F3C1
-:1005D0000DFE4846BE9826F0ED58C8E7E7A8F64B52
-:1005E000CBA1DF0E33EC5FF83E2DA0F8288F3EB094
-:1005F00050BA01E6DD21717E0B1FA5905D52EC49DA
-:10060000C1FCE406711E5216FBFE8ABE4D32EAD3CF
-:10061000BF6AEB9FA114C6E53B88F8F17BF9ECF6C5
-:10062000F923F82D5B3339DF5E207B26231DAD9740
-:10063000FADFAECDC4F79C1E6727B796635EF1352F
-:10064000969672943FC3DEA7C0FB92B8B291B76B87
-:10065000300DE5E2F9649F25B02E13E33E8B3FA6F3
-:10066000B8E4F7B3DE3D8A7905EFEA7B6625A37C23
-:10067000C917E7FA855FF0CDF1AA5FD0C4CB93B874
-:100680005F309AAF3599E78BD52EE4E7106B453E86
-:10069000C21C3B3FB733A73CDFDB0153BC8E0D29A7
-:1006A000C8F7E6BCEF4F46BB9D2D0C94FB278FAEE1
-:1006B000CF30B7DE13BF5FE77AE2CAF0EFDA626DE0
-:1006C000F9DB5E6DF9FAE97F1E1F5FDE65F16DC52E
-:1006D00075FF54E2F98DC12B989DD6E99282A877D7
-:1006E0004C7A394B9CDFE47978FF28ECA297A7334A
-:1006F000AA4FDF6BDA8DF9EDAA1F5916F593DCCC02
-:1007000094E7E4F705A0BC1A92443E9F8B6225EC67
-:10071000A53BEC1C7ED0D600FDBCB4D843FB23DD4A
-:10072000AA6357E11E2A37911E5231C6948474730E
-:1007300048D09D7A1E57A5C30A85F9313F01865ED0
-:1007400088CF77F5F683E83F0E7ECA18C757A542D3
-:10075000F985622CC6DAA9FC98A0EF43624EC11F4E
-:1007600028B49FDFB019089FF2CFE55D282730F647
-:10077000827EE1731B27D2FCD4FD03BBBAD0954E19
-:100780002E6BD1AFA2C349140B7D42A56FD480B0AC
-:10079000DD18FCCF7CA273E23743D3F8FD09EFE507
-:1007A000737E32B4C929CE7BF178588E29DAAF0F27
-:1007B000FBCD8C8EC3CF13A58B32548575B0EE4F15
-:1007C00032F369D34A033FFB03C965AB3780E318B3
-:1007D000924D740E46DD37F6CEDFBE5D7B05AEB3BF
-:1007E000E87BB4CE79363BAEB318C8BACE494F5F7A
-:1007F0002AF5C7F78F9CE4F5E03EF94ECD2B3394F4
-:1008000038BA81EF1BF9F716EDF76EF8DE19F77DB0
-:10081000327C5F32FCFBA76CA6B06E0AF653E1890E
-:10082000103F0FD362E68975C9E9FCBB7922DFB3BB
-:100830003019DAA3BC29D6E663B0E95E13BFAF4333
-:100840009B7F718DB42E13F7D55C53E34004FAFB04
-:1008500099C0DB35BAC057783FDDCF16151DC6FDF0
-:1008600056630A29680F5DCBC2EB1199672B034FC2
-:1008700038C6123FF80BEE8B263930DE09E5D3FA85
-:100880009EC23BF269BF5CCC9C367CBE2A5DA8F35D
-:1008900045FA403A8BD247C2BCA378BAAE8F12D584
-:1008A0007680DE834F550F024B9AE7137B7262EB23
-:1008B00002229A636A29443DE467ED41E21BD7387E
-:1008C0001EA1BCA5336302AE2CC07FDD655FD0BD29
-:1008D00026CCBD783CEAF730DFB4ACB4FFBDF9AA52
-:1008E000FADEB07CDA4F0D9A7CDAD1F6953A6E33A7
-:1008F000E3F7D3CC1AD845F9B1CD0BAD5E3CE7D0C8
-:100900008CF99DE5143F223D0ECF01D33D2792493E
-:10091000E85D979A77CBF7616FA387F4B7281F1725
-:1009200079E3BDA57CDEBD7778D47B4EB87EB798E1
-:10093000F17B52D47B4E96DBA95ECD2FEFDDC5FD5A
-:1009400078BD2F8EA7F350A0BF91BEC052747C7E9D
-:10095000F9DAFB55F04F4A8FE5436FD6737D739BF1
-:10096000CE5B8170DE86719EAF89EFDE94A5F59B2C
-:10097000A8E544BFDE33CEC02D59E80F28F1E54A83
-:10098000403F4B0DDC6F07F4B51DCF4ED4B096A79A
-:10099000F0FEC0B9ACE5D7BAB1445F01A2AF495F80
-:1009A000F07B0563F4B598D3579098924A5F51BA9B
-:1009B0002A4ECC9F0AACC6F6BD8EBE8F9A504F1DF4
-:1009C00030125ED43CB8C47D1C379F137A3E1F970B
-:1009D0002CD37CD68E349F4BA1F378FACA609C9EB0
-:1009E00047A3F70C85056D65317ADF6509B4E3B877
-:1009F00051BA5FCFED9161F396AD441F37DE2CF312
-:100A0000FC700B9757188FC884F1E78BF16FECE6F9
-:100A10007474A3CD4074377FA091F28558358F2B25
-:100A200078E17FDC0EF4117CEBC4770B5DA57A24B2
-:100A3000D985B5DAF8439D558D6FF8F5B81F6F5C11
-:100A4000A83F162FEFEBD8C62F30AFAD0EE314EA58
-:100A50007730EEE359D1F37FE3314E7158D8E9672F
-:100A600081BE91FEDF485BB9FD0EA0DBF18F97944C
-:100A7000A13F6776FAAAA73641F9996D13A9FC46FA
-:100A8000FAAD77BD8BF53B8BA85C8D97B8A0BDD137
-:100A9000C8BF2FAEB8795E3E8C7BD82CFAC57D8559
-:100AA000765F52A0773EB4734F2928C37CC36AC1D6
-:100AB0001FCEDEC1F3DDAFBDCCC65338577AC86F49
-:100AC000549D24EABFCBFB7DBBF45FCA30EFB4BAC0
-:100AD00080DFE3F276D94F2762F9B0F4C5A291E244
-:100AE000DF938AA5F004804FB593B7AF2DFB511665
-:100AF000DAF1D555BC3CC95BD93D16EB75E7168DCF
-:100B000074EEF317623F45CF35897DFAB2EF633A51
-:100B1000C7E437495E5CA27FFAC7FC5E22AB64473C
-:100B2000FFA3DF97AFA09F74968FE7255699DA331E
-:100B3000D1FEBD2E6028C7FC52BBA9F430EA1929AA
-:100B4000D32BA7217E6799981EE512D0F9FF213A91
-:100B5000BFFC8BDC64242EAB96CE553A9AAFD2778D
-:100B6000B5968E617FFE7356DA37F3D7D1E818C693
-:100B7000FF77E41375DFD2CA95687F09FB2DB1FFBB
-:100B8000D1F800FEC5F3B9D83CFA685F6563D6D7E3
-:100B900058DC773DEABE1BC27518748374AE234FD0
-:100BA000F24EA4038DA3C87F757E39C0DB58D9F0FF
-:100BB00079E19FA2EA65FCCF85766EB6A887EF7CC7
-:100BC000CC199B178CCFC6A0DC5FCFE7B3436AE19B
-:100BD0007C43E8C5AA7DDCA4AEB75FBBDE8A247E79
-:100BE0009ED98DFE0BFCCE553AF1EBE6DD2CE4E60A
-:100BF0004293FF4123ACE106C752A2879B58F045C0
-:100C0000D44F8C2901E79834B4BB820722F9E4CF92
-:100C1000A5BC00C077EA9838FD449D57223C9A460F
-:100C2000E18789F34E84430C3F83A45FA9E7A3A225
-:100C3000EB4A588F2AFF5D06AD1FC829FC364EE1EE
-:100C4000A7410A413958CB92286F61965722395EE5
-:100C5000CB4CC43F6B6BB8DC745AB99C57E5EB685E
-:100C6000747DF5559CCFD4363071EE8ACF3F91AE6E
-:100C70003258E47BF8AC3579B62EC3FD8AFA80276A
-:100C8000B6DF6BADDCAF3B778CF01BB2C834B46F12
-:100C9000A3E5617EC4C834E41B89F745D55EE07ED8
-:100CA00044A7B897B5D6FBF134B4D79D359169C840
-:100CB0007F1E74F8E621DED4FBDC12F9CE8D63745E
-:100CC000AA1FF192E82D110F6ADC2835C55F87E372
-:100CD0009C96062BB0F29134E1D767817CA44787BC
-:100CE0003DBF12FD01C0DF2E5E44A30AAB005ED300
-:100CF0009D8100D2DB4DCC3F1BCFE2396B027AEEF7
-:100D0000E766B4FEB562FDB385DC3BB75D263F7D8B
-:100D1000B5AFF83174A5371FD1B310ED3B1FC9B182
-:100D20003562FEE718C7D3392B977F2BDFFAA70A66
-:100D3000A05C367E8B2E768F01FC9B104AD2DC6342
-:100D40003069AF53539EDC97A5697F597F81A6BE5A
-:100D5000343C51533FF54899A63C6D7086A6FDE59D
-:100D6000EF5769CA5744E669DA7FEBD4024DF9CAF6
-:100D7000A15B34ED8F0BFB94057D83C5E978CFB77C
-:100D8000A0CB0B4B34DFFD3679CE11A4CB651B799C
-:100D90009E70254046739F430F97EF2DF03F8E576F
-:100DA000BF82F05A017A2FE607AFDCA295FFF50368
-:100DB0009BD6234F4BCC5F58CD5AAAF06AB8C4FCDF
-:100DC000856AFB621DD2E1E363449EC2E5EC727169
-:100DD000FFCAD7E2B58815FE97F06A746BF16AF620
-:100DE00068F16A29D6E2D5E6D5E23565BA16AF0EC6
-:100DF0009F16AFA9355ABCA6F9B578CDA8D3E23570
-:100E000033A0C5EB987A2D5E735AB478CD6BD5E2DA
-:100E10002F3FB85A8BAF047CABFC6F6CD75A4DBBDD
-:100E200028DEFDF5947732AEE71E4DBF2ADE83F053
-:100E30003F8EF716CA0BFF6BF10EDC86FCA089789B
-:100E4000FF2001DF20373E44BE00F2FEDFF05937BD
-:100E50005EE8D5FE91E5BDCA7FE2E56BBCFD381AC0
-:100E60005F1A264F843D39AA3C49B0273FC0EC1891
-:100E7000D2533692BFE566419F5FE2AB2BD09FF91C
-:100E80006392931FC044A6C3BC3EC079C3381F24DD
-:100E90004D227BFF5616D6D3FDBB98F1079DDE8E03
-:100EA00009C032DE9BE3A1E7522147970B7F80CF39
-:100EB00012B83886FB01F2D271DCEC417E0FF2DB16
-:100EC000A997741FC031F4872B8C9D407F383CCF8D
-:100ED00098393D9C54F9838F795C71705B324B2A51
-:100EE00026BD514EA2BC9C253749244796FC9E3F07
-:100EF000D3B3B9FE99F8EC6855E1C6ED9299D91EC5
-:100F0000E2EBD9AC4FC83B16B08EA57EB8FFFA49CC
-:100F10007E0FE8F31253A63BE93812E131C3C4E770
-:100F2000F5BC9E99107ECFB28007E1F243055813BD
-:100F3000CF879F88F4B0E4F7EF16A03F49EEB05F8B
-:100F400087F73C4FC0F1601EB36F6B91D0BF9AE141
-:100F50006E91D07F33ECFDFE7B243CC7172D33DE32
-:100F60000EFF100EAA9FAC58C7E3C54377703DFF34
-:100F7000A9EF32F2FF74B4062B83182792C120C365
-:100F80007C123D3FF73B339BFBBF32D920DD2FCA9C
-:100F9000DE14FA99B897BD44E4979F11F19615BBFA
-:100FA0004C0CF3154AF61D74627C6505E07210E581
-:100FB0009912A07B2C4AB6BEE1E4F77DEB1D785E6A
-:100FC0004C95A3A3E35B6127E3F2B4018F23DE1703
-:100FD000795B0E97E31D6D3533313EA2CEE7FE36C9
-:100FE000DF4CA40F59F1529E17DE6FE388FBDEE061
-:100FF00082FAB8FDAB586B3465BDD54F9746AC6FE0
-:101000006B213AD38B7B781EC85E6B8FBFBFFFD638
-:101010006CA1479882CC9ECE840A8B4FE524F28740
-:101020003F326E0F1ADDD04F3C5FBB2B97C5FB776D
-:10103000BBDAFC34DFF55220809D180B59D89C8C0C
-:10104000F90378C611DE6FBDE608E6B3186C6BBD18
-:1010500061CFE87033BA95F3F17CA9215BCB97FEA1
-:10106000A1ED14C1A9A3AD8EC63B83BA1CFA773299
-:10107000B97FA7A36D31BDD7D578889E5EDF3AFED4
-:10108000A007EA8FC23FBC8FC6E8E2F362E5B9244D
-:101090009F16093A40DF510ED0CFD1563DD1D99D90
-:1010A00039D6106EC23BDF197710EFD334008CE4D1
-:1010B000BF62DED171049C0C822F013DF971BF1912
-:1010C000B214F2C33AED0B084FFFD5FE54F81ACC18
-:1010D0008CEE7B31E458C97F72A9F3DC922DEC7C55
-:1010E00055CE97E7121FBD53C0E5F5AD3CFFE7E8CD
-:1010F0005D8CF4EE3BEFE67EB03BC18EC77DC95AF6
-:10110000E1AF2246372ABF4EC31B37E0654F1B3085
-:101110009A22C61E6A33E1092766417FD5D8181E78
-:101120007B7C8A03DDE29BAA5DF3F1F9D0F4133DE9
-:10113000C8561E9EF9D5203ED1D78CE3DB5B5808FC
-:10114000F54C8A89C2F88E7A28C3F8C9A23E39C004
-:10115000CB29A23EA58E97737C2F48D538B18478D1
-:10116000448ED539B710F9DE32C6CFB78AF3ED3BDE
-:1011700004DF1D6375CEAFC6FADB18E5BDABF58F96
-:101180008BFA4CEBB1AEB1C897176ABFDF2AE0907B
-:10119000613DD6338BE216DA7A35CE90663D7784A0
-:1011A000BE2FD1D63F2ABEB759CF0DCEC2FA42EDDF
-:1011B000F80F8A7A8B95F343E6E7F794AAF53F1484
-:1011C000F5662B3FE7053C5953DF2DC6EF9042846F
-:1011D0001FBA8B15F74F1AF75BEE6C6357E2FEE907
-:1011E000691BA27DF450DB05C2D339CCF39916DB21
-:1011F00057F65636E2B9EB73829F247B223EDF0816
-:10120000FC4EAD77DAF9B972D96D203A325A05BF82
-:1012100010FB30CA2FA4162F272EEE4FFE267A86FB
-:101220000D761EF58B5CF8437ACEBE4BC702717CFF
-:101230002BAB218905E2DABB973935E5F4DBB23413
-:10124000ED5D0B0B34F5D6F2899A7AE6CBA1FDB2AF
-:1012500056D055524999A65E3DEFCE7A7234FAB314
-:10126000BE7086A6DDB9620FFD8EC7C9B9EAEF7DF3
-:10127000784DC817D6DA0A3250EE3CDB361D956C35
-:10128000F63CEC273CA2F49C83E7F93E87F151A899
-:10129000FFC7361FBDDF03F5A0B9B02761BF79A036
-:1012A000FDAE363B959F6873D373479B879E8FB780
-:1012B0001553FDD6362F951F83FEF1F928F483EFE1
-:1012C0001F69ABA1F2A6363F951F6EABA3F2836DEB
-:1012D000017AFEB0AD9EDE77B7B550F981B6567A89
-:1012E000DEDF16A467475B17D5170BF9F69C382F7E
-:1012F000F85C253FFF9B88C7C939C28F26E2F8B644
-:10130000581C7F720EC6F1FB229A7BD671DDD49FEA
-:1013100099AF3FB1BF2AD1DF4436D86EE1FB98E2E6
-:101320007FE3FABDF75980DEC7B4703CE4F70F5194
-:101330007D663DC74595982F73055976053FEE8923
-:10134000EDCE488355161E0F257F0073C33A2BC47C
-:101350003D344476211DCE4B99CEE5A68AD7E8BA16
-:101360001D7C9EB8FE91E6FB6D315FB9BC8FDF330B
-:1013700051D31346B24FF2B5D03D13A63A7F187F32
-:1013800047C2E50FD0B9F78917E68071037CE6C242
-:1013900055CC03CFEC06ADDD93B5AC4C635FC817FD
-:1013A0001E629EA9D06F89D63E492A5CABF9CE94C5
-:1013B0007D8FA6DEE0BA4F53BF644DFE7A37C2730D
-:1013C0000CA3388971633BC3D0DEF2DE4D34AF7BB2
-:1013D000C53ACE481E3A371BDCA7C6C9B97EFE8C7B
-:1013E000902BCCB491F6C378072F16A50475281757
-:1013F0003EFFA714E2474F3FA10BA11F74020BE968
-:1014000070FF4F02750FEB27E34DB5325D5D226330
-:10141000B99479642C4F6543649F807E7E27D20BFC
-:10142000E8E74F98314E97137886E70F85496E1697
-:10143000097C16A9F6C81625D13F7A770EF93FB474
-:10144000E7863A859EDEEEA8C8C0F8E49951F2BB63
-:101450006CEE1933F0F7AC6C99D3E9A9BE7FD0A339
-:101460001BF13CECC61CD58FC4E97E0210B9A0FB71
-:101470008D388FD3E5BF4A4773AFA97088E8FF8CDA
-:10148000E4732F46B8BE25733A1CC8A4752902AE72
-:10149000CABE4AF762809FF2CE586F90C5C679BA2D
-:1014A000CD37435162E522919FB8B76DFE8CEAB803
-:1014B000F7FD027FC56CB006E5537189CE1BA29E75
-:1014C000DD1AFE652EECF1E1796EA58C7991BD4DAA
-:1014D000603DF7A1AC56FE2253BE8972E80AE601D0
-:1014E000BBC06A0D33CCCFE98FEE6FA6F99DA3AFD9
-:1014F000ECD529742F5F5694EFA14CC4DF351A4404
-:10150000FAF9AA57CFD775485B5F6CE579342B8A17
-:101510000D218F84E1ED1EBA7F4ED9293154FD95FE
-:10152000BFCC2238B0972C447F962D53E8EAEAEBE3
-:10153000944008E9E374D8F3926EACA04568D738BC
-:10154000C9B01BF5B1F108175C506131C175B958CC
-:10155000EFDEB6C504A77704BE3A7312E6C3BC3EFD
-:10156000BC9F7145AFEAFFD0AEF3C1F2AAEBF13EEA
-:10157000BB8E4159E84A5A786ED00F4EC1DF883B86
-:101580001D8179C934CF7710FFF2960AFA9D231096
-:1015900020B4BEC627C0DECF277E5443727B9A8E0E
-:1015A000F24413E9EAD7828F2DCEE1FE3C9BFBAAE1
-:1015B00019F87B6BB1F24CA2CF6775DCCF1AD471EE
-:1015C000FB52CDA300C5C183765D41AEEA67EC64F2
-:1015D000F3505E3B74947F27EF4AA27380B243A11D
-:1015E0007CDF4E6BB57D35F6635728BE31479E399B
-:1015F000887AB3D1A19B8A7AF7E1DDF70C629E87E6
-:101600009CA330F41775DA15AE7764EB282F4A7176
-:10161000549B301E52643D5189F03CB8EBFBE4DF33
-:1016200090BF277235843F492F50D6C95AA8FF6012
-:10163000B622EECDF0D596A60B57BE07ED9F9A4F7A
-:10164000D18F72D87ECE8CFA8AC7BA82FC6969B90A
-:10165000DC2ED463DC0BCA4FAC3BE740BEF5D6AE04
-:10166000F5CE7CD49F430AE920C57FEEC8A2F3DD06
-:10167000BB0C74FE5C856B5E50D1C4CF725AB565ED
-:1016800063421C4D9F70FE2709C7A7FD5EC7C2714C
-:10169000EBD1BBB9BDC65C56B277D27225EEE7116D
-:1016A000656B2EBF7770AF3E98E505F81CDAB52262
-:1016B0000FD775FE9500E5DB8EA6EF7F94E311F85A
-:1016C0000B9A75748F69D88CF9B74FB5B134D4EFD4
-:1016D0004C2185F29FF7087E5668E5F4FFFB5C4ECF
-:1016E000E789CFC21EBEEF94E7924216C49BBDAFFE
-:1016F0002C087432E9F5B9CC03F2AFD0EE23FF61C8
-:1017000061AB210DE3F8737E62253A39674D223FC4
-:10171000A1D29AE4C5F71DBB2B8AE3CF3585DAEC5D
-:1017200069981FB3BBCD94867C2A340A7F1DEBD009
-:1017300051DEB047C7F3DABE25E6F5AD5C0BBF4717
-:101740003997F3992795E0029CE793804FCC573E59
-:10175000B891EBC36BDB4D348FB56F8D25BD6A340B
-:10176000B83DDDE64EC37BD8776FD465A1FFA8B244
-:10177000BB7003DE47B0D6C6EF6395532692BF9386
-:10178000FD42CF507FEF489EE15D1AC7DFE5949997
-:10179000C54857B21CCC42BF887F67D5F598B708BB
-:1017A000F8DB86E5BADC89D7635EE35E5B300BF37A
-:1017B0001C03B95378392DB80DF31CEB73CB783972
-:1017C000279885BFE7D4925BC1BF1F17DC86E5D69B
-:1017D000DC19BC1E7D4FC03B83B9575D1F84F13AB5
-:1017E0000CDE7A64C83F86F997C0FCFBC4F33E0167
-:1017F00017B5FE057C0F70DE2F9E89F52F89EFFA55
-:1018000047A97F55D40F8CD2FF6BE2BBF028DF1FB6
-:1018100012DF1D1EE5FB37C5774746A9FFB9A87F34
-:101820007B94FE7F29BE1B1CE5FB5F89EF7E3DCAD2
-:10183000F7BF11DFBD3F4AFD87A2FE5F13FA3F2AC3
-:10184000DA47C4FB02DBC60FC3407705C047902FC1
-:1018500015DB363A719FEFEE2A27FAEFA8E0F11D6B
-:1018600095DE0BF07794A0FECB5C7E3FE89782FF7D
-:101870006E17FD031D3E8C74B7F61D99F25D3A7428
-:10188000DE5321E4A31B74A40FAC7D8BDBE76BBBA1
-:101890009550FC3988ED09F35F2FE6D729E6DB9BED
-:1018A000CBF3A98D6E775A6DBC1FC9AE2D637A1428
-:1018B000F25DE0DF943F5BDC5DD5550CE5314E1DFC
-:1018C00069204AA3298CF72228362117ECE53DC56B
-:1018D000383FAB42E7C1158712DE8BDFBBCB49BF78
-:1018E00053E7D76955E85E2CD9C6E5C09C9FCCB4B8
-:1018F000A39ED5C902833EFCDEAD90FE7EB0ABCC8C
-:101900008E7CCF605B66C7FDBBD6C3F77F75537116
-:1019100012F26BF9411DF1EFC376BEDF77BA75E4C1
-:10192000B700B942E74A805F7B51468C67E1763A5F
-:10193000A7F0D04B8BB95F8FD94A2BE8DC861A0F02
-:10194000969438FDFF04C207CF4B0839A2A07C81D2
-:10195000E793E5E2BC4190FB9FF214E61E13776E1D
-:10196000F244AECCCF63280823E84BAEA5FB8172CE
-:10197000D7291AFF7BF65DDAB221416E280972651C
-:101980006C17F0C938B9931FB46BCAEFE50ABF9959
-:101990009779517F9DF3938DC40FCFA17C9346E738
-:1019A0007B51FE2BF8F193E2BE9B2783FCBCEEC17A
-:1019B0008D653F477CAFEDD6D1FDCE97CA47B7E7DF
-:1019C0003282C3B800C81DD467149685F6D237C1D9
-:1019D000619CDEEFA4FB0BBE011EE31E2D7722BF30
-:1019E0001D175048EE0C931BDF00AFE725EFFB01FE
-:1019F000C4A32389EBD576BEEECE7417BFF7479C00
-:101A0000039485BE76BFF0832B29733CF8531C9D4D
-:101A10008E162AAF97BC19D742FB07A4801DCB476F
-:101A20009C495CEEE424111DEE455D86EE2FCCF45E
-:101A3000A37FA42F6450EF030CE3FFEDC33C19F523
-:101A4000BE4137E967A2FCE0F5D5D85EB14F4295BB
-:101A5000B328AFE761FD95D0DEC0A2EDF15CD3B352
-:101A60008775A2BFCD0FA3BEBA2F8969EE5BDC8755
-:101A70007E742A6F7D18EF4F84F1AE95C1069BFEF0
-:101A8000C4130F5BAF88CD676AE8A987DB295F9530
-:101A9000DB250EC6EFC33EED8924E37601FBC4933C
-:101AA0008776F9AE13E99ADF3F13ED5344FBA68125
-:101AB000A1A6E73CD4BE88DAF70F2597D0FE1AAA74
-:101AC000886F9F2CECFDB8F6255FD7BE589DCF736D
-:101AD000BFBAB184B72FC3F6673C9174CA3D499829
-:101AE0004FEAF0FEA77F5DFF1345FBD3E15F51FB9B
-:101AF000332C923E399FBEBB3A0FE8F8ECDBBFAA0D
-:101B000010EB4E473D19B8A20FDF277B98B877AD91
-:101B100085F4E73E538F1DF535B3BEC78F7CB710F4
-:101B2000EF4F9A1E7BCECA2BE47A55C2FB3E134B75
-:101B3000AD457A6CD591FDD2671A2C2B417DFA65A3
-:101B40002B6B87317479EBBCC807FB236BBD25D0A9
-:101B50006E67F64CB22BF6195AFAE89CED622B9D93
-:101B600003DD69EFB1E3FE313B7AEC184790EFE615
-:101B7000FA93B2C41A780AE929BCB67879DCFE9DDA
-:101B8000EAE1BF23D3FD867523DA01DD7A6FCF78D2
-:101B9000D4B36D0AE5812B4B06E6D1B9BD1FEB1816
-:101BA000F177585715943B1B75742F7C9B67C9328E
-:101BB000842B53FCFE2AF82E374D91F01CC4FD8A6D
-:101BC000DF84F10BA3D0DB767AF9EFAEAAE36EC81F
-:101BD000E3F269431EBF1FAA7BF173C56FC2773B57
-:101BE0005BD7F6E178E6092686F95E3BB34F76E3EC
-:101BF000B9CDC7DD60F1021CAC0D3AFA5D94C76B3C
-:101C0000A14D0AFA330C1A7FC5F3521FB50F36EAFD
-:101C1000C84EB0961834FE8DD4069D0FFD8E3B3C09
-:101C2000817B71DE53DF51AEC5F1DCE3143BCAA703
-:101C300007DDBF36E9609EC9E5DA7EED33B5FD38D4
-:101C4000ABB5F5AE5A6D7DFA426DBDFB364382BF32
-:101C5000465BBE888208E1083CC00A72288957B1F9
-:101C600024EB79FA5DAEEEC0F69EF1B01EA32558C6
-:101C7000FA26CC37696212D9FB0FBC91849B0FF80E
-:101C80000F23BEF3C06446F9A78772BEEF46799A68
-:101C9000089F9DD9065AAFB510E0998FF6FA29FA38
-:101CA000FD2C2B8B6B978FF0F16DCF9BC6CBEE0A83
-:101CB000F4CF31E283CFABFEE31BF8B9A69DADDCD8
-:101CC0002FFD601DCFCFA31554E0FEE6ED93F1F795
-:101CD000BCA6A0DFBEEB0ECC3B4C846B06E6E3C893
-:101CE00031FA58AF9E23C1538C159C2DE3BE3BEEB9
-:101CF000E174F2933C2EFFF7897B0FA2ED711FA6D2
-:101D0000336ECA427FAFE6A9FE079E97BF598DC7C3
-:101D100088325E1788E57D879DD7E27EDABCD05990
-:101D200086FBE901A197A5641B7C1360BE8F1C3163
-:101D300004A5CBA0ACB0C37A90E7FB9C7C5CC35BF2
-:101D400049413CD7F488BB9CCE497D24E6F542A5A9
-:101D5000F7BD5ADA8F0AE5393DE2F29ACBB8BE8177
-:101D6000774A33FA4954502D0ED696919DFA88CF72
-:101D70006BC6FDFA48B6D78C79C2E64CC58EFBD847
-:101D8000E956E8BEAA474C013BEA2D4E1080F83BCD
-:101D90006D869C9EB9743E0860A8ABE0210126F2D6
-:101DA000E9309F2D55C06BA77B991DCF91BB0AF7DA
-:101DB000FF1DFAD553B1BF64FE1DC2C921E0743CBA
-:101DC000CFC3F38345FFA9CB5EA0F6F8D75911D74F
-:101DD0009F97D397612E0BD1EF8D89F1D57EA2FD10
-:101DE000331FF9EDD7FF9CC3AD3D87DFD36358C3E5
-:101DF000C80E7BA132B0F720C2273389ECEC2C77D8
-:101E00005615D247D6916D0BF03CC0FA9F73F96915
-:101E100058CEE34D590A335D85EB4E0BD8118E89B0
-:101E2000FB30F370CF7C2436152F89FB3253615D74
-:101E3000B273F8FECC74BBAA8AA68CB04F13F641DD
-:101E4000E691A1EF61FF89FB7587E56829C2E5FF8F
-:101E5000029F8BFAF4008000000000001F8B080036
-:101E600000000000000BD57D0B7C94C5D5F73C7BB2
-:101E7000CB26D9249B04424248D8CD8D402E6CC23B
-:101E8000C588A84B48102DE2227235E2131220407B
-:101E90000201F46B6CA9590C372DD6F0360A5AD4CE
-:101EA0008D058A8A362820566C978B8AD56A5AF512
-:101EB0002D554B13A18A728BA17D3FDAFAB6DFFC58
-:101EC000CFCC24FB2C89D27E6F7FBFEF4B7F7598E0
-:101ED000E79967E6CC3967CE9CDBCC3266632E3B54
-:101EE000A3BF7F98F1DFAFAFAFD53AEE1F369A317F
-:101EF0007F8AC5B3C3C5585AE87B37FEFBF708D4C1
-:101F0000356672FD2393B151AE78C606E279BDCB3A
-:101F100057C0D81E9B73A26300635D2B98E729FE10
-:101F20007DE94B9BE6BEC5EBFF95E67046F056A9F2
-:101F3000C79ADBF3F97376401F86F6DB2CFA93D150
-:101F4000FCFDB6E383985F632C229AD5B7393854E9
-:101F500026A6A3FC07FEAEC738561A6794CBC4D892
-:101F600018C678170153F2BF5EB60D1992E7F4F068
-:101F7000FE0229ED76DE6F9BC59967E1F59CA1CD48
-:101F80000F59AFC53C388CE368DA5E56C2D8B34708
-:101F9000F9B883517DE4A1320B7F1FD5F3DE8FF7B3
-:101FA0007B4C26597FF4A1B2218C0D39DAB6C6E1FB
-:101FB000E4F31FDAFA909DE32DF257E2FD045EF799
-:101FC00067012FB5433BF8FC0EA72FA1F937FD2E73
-:101FD0008245F0760566CF56D4D947916C07AFEFAE
-:101FE000DA377EB68BB76B8A19EBD2F3192B73698C
-:101FF00034FF525986CFCB6CF3E81EC7E5CFC74BF1
-:10200000BC31E639DECAE95BF0631B7B80BFCC05DF
-:10201000DCA0576B64E029D0B7790B63498C553B42
-:1020200005CDABF73F907E88972FC74CBBCDC5F150
-:10203000541D53960478522F31A62772BA35DA9977
-:10204000CE71953AE0058D71F8860C383A8139C029
-:1020500037ED6B9C28EBA398AEF807F4BF6461FAE8
-:1020600028F4E7A5FEF0674F02178ABFB5093A5B6F
-:10207000C3E1F1735CEF00773AA33AB542FE8FE417
-:10208000326F47AEEC27037CCA66B7F1F12A8107AD
-:10209000DE8F8DD3C45ACC4B872518D147FB8512D0
-:1020A0005F66BB23681EC94BE7EBC7A95F87E56C7A
-:1020B00087BDB79D3D60217CB05A16C8D6084FFE3B
-:1020C00008D4E312A8CEBC5ED78024F03F23E4A658
-:1020D0005AD8D1083E2E712F5F3F292C48E5E31CCA
-:1020E0003D8E4C344A8BFF349AE111031F3FC5D813
-:1020F000E450BE56E5C57413CD23ABC134F014C70C
-:102100004FDE914882C3B2910522F96059A007A71A
-:102110005BD62616B0B8D1CE36F05422BE73D17736
-:102120002EE634311AAF6D04D6D5D6D71D9B581C78
-:10213000D1F74E1F1F6F6B14AB01BED4788CAD214D
-:102140007C6C768971B7353A898EEAFD90DAC36185
-:10215000744C30D051B54BBD3498E8D9DB6F80FA60
-:102160004D6DD84BFC907A295DF289EB1BFACFE8D4
-:10217000A7FF64FABEFFFE87D0F88F07DF8F9FCAE4
-:1021800051F1A3AEBDF13E5E465A9B7D9E3EF09C52
-:102190007A57883CE3FF1F7980D7737BEB0A2F9136
-:1021A00056EF80691CFF91779B3CADBCBFAB8E1B8B
-:1021B000DB4D767F108FF5D8DB3E38603ADAD78971
-:1021C000F6D79C36B6F74DD817D65EC077FD256397
-:1021D000BB70FA84C3CBE11A382304AE89F608C376
-:1021E000F7B32B2F836BE0AC10B86E4836B6D7D759
-:1021F000F40DD7B77223BE162ED5EE96922B6B1721
-:102200003E8FE99323FAC1BB683F6BF695F57B7B64
-:10221000CDD7B7BBB3217C1CBFDCAFF8DAE2EB381B
-:1022200011FFE04B20B1C1E48D8C65CCC9BA18D642
-:10223000D1C9A12E6A97C09CB49EF9C2D7B0AEDEB8
-:10224000C33F53F856E0F69D738D01FEBD150FF3A5
-:10225000A66572BF6253788F57A3735FC1AD0597B0
-:10226000F31F63F7115CAF68BACE689FB57B76F059
-:10227000F59D97CAEC2909FC757220E3D618C6BEF5
-:10228000EA91D75CD470384748DC3D37B86D653C7F
-:10229000ADF34002E0F967C7B5BBBD66F798DEF65F
-:1022A000E1ED7ADB0B3CD96C6D2B0067579DC38346
-:1022B000FDE17DBCE2DFFD786644D0CCF175C1EA7A
-:1022C000D8A87139733C7ADEEB03391EDE8BD5E377
-:1022D000D1FFEC5937AE475D3B9CE85AC9E1BB5092
-:1022E000D9311678F546EB03DDBCDF5ABB3E3489A5
-:1022F0004FF15C9A3E2C0EF8F525125EF93F0A7CF0
-:102300007DC22FE029D304FE13E3F474F453666A0C
-:102310007FC2876796F6B1F88E3907127CE76C5C4E
-:10232000DEF5B1FE151E4A653F87AC9EAFBAF8FCDC
-:102330000E6D8EF3347178AB1367CD5BCE5F2D30AD
-:10234000F992826603DCF904B7A372680AE0B64A20
-:10235000B8ED0325DEBD595F077713C6C3BEF63D52
-:102360002DB0C32D6889FA4BFEF8C003BC1E61BABC
-:10237000F83EE4475781C9C3F708B68DEB1776BE20
-:10238000AFBC2BF1FD38577FEC09F47C239E274727
-:1023900089EF931F31059AF8F7BED297894E3F5EB9
-:1023A000E6F098F95895CC6503DF5631AF0DF0FF94
-:1023B00071C2DF5EEDE0F3BBC9AD97833E77269A2D
-:1023C000D2DF2738F4BC699CDFD87881FF6FE20741
-:1023D000C63699D858C66E95FAC10289C7E9CC6B42
-:1023E000C53833986EC5B8BF396FF332CE1FBFE121
-:1023F000B8621CDE59CC4FCFE7B00095B7B320B51B
-:10240000BF837550FDD7D185690D1CBE695B86659C
-:10241000633D86E0FD76C92F770E10FCF2D920E0EF
-:10242000BD65E015F1EF344DE06FB05BAF76D37A68
-:10243000750DF00026E7C421BE9890F5533650F094
-:102440009FC599FD75EBA7BD3BB6908D2479E048FB
-:10245000E178B84192F206EFD229982F2408D6EB02
-:102460002D72BD969B1D6C00A74BBBCB1C88E0B0AA
-:102470004C9EB02219F37D630DFBD5284EBF372645
-:10248000985913B5F4D27753657F53874CFA1CFAE9
-:10249000C9DB2C386034FFAEFC927E348EE367AA31
-:1024A00079F75AAE71B3C943AC9F7484C8B51B07A2
-:1024B000ECB130AEBFDC94657C3E259FD743E4EEA3
-:1024C0005466E97DCFE97F08F881DC61CD66F0EFE5
-:1024D0004677CC804FF37875041B21EC034E8D902A
-:1024E000F974DBFF6EBBC0BF7BC5AD3F04BAAC8CDB
-:1024F0003F3F8FF40E8B98CFB277CCA4577ED2C8D3
-:10250000C079EC14D70FBD398C7DCAF50BD44F3789
-:102510002653F905D707509E6DCCA5F7E71B3D5410
-:10252000FFC4EDDB8A7EE76FFCD2827D6943A4C2E3
-:10253000B7806395E4BB0D6963B7FC95E375C3DBB6
-:102540007C6170786ADA9A2771358BAD4AFBE43E7C
-:10255000E8CFAB9ED63C68B7F4A0D7E6E0F02C38C5
-:10256000AAAF079917BDDD311562A20EFA2BD71B52
-:10257000EEB7FA7662BC311F9C4AD27903EFC1CE26
-:10258000D71379FBCF1A4B08AECF1BBD04D799C622
-:10259000C954FECDEDDB8DF65EF6A50DED6FDEDDEB
-:1025A0006949E5EDCBBD9A17EBF13A2F0B04383CA6
-:1025B0005BAD42BE6FE5F21DEB7342C1AD8FDF052F
-:1025C00071E1D6F7830F6724549527F2E7534B2A1E
-:1025D0002D6837EB2B2ED3DCBD7CF8CDEB50E0A380
-:1025E0004ED2E5DCCF35C2D3B9FD79B75CC3FBFB76
-:1025F000F931333373B8BA2F9908AEEEE35101289D
-:10260000ADAADDCA7D66D22757A6D902C0DFCA7D32
-:102610007983A04F9DE1746339BDE39D79EEDB2E94
-:102620003D448E9E4968FBAF0F21A77E2FE414D74F
-:10263000373F7D0C726CC8600FE87EDECAF57220F1
-:102640009AD547631F5B6693EB8BCB19D4CF44318C
-:10265000D247C73E9F5A8AF582F15CB65E3994F341
-:10266000FC968CEFBA7AC7DBD5B6E0C3C778FD5CC1
-:10267000C0E4B7F27DE61C6B3BFF33C8D1ED0E0F13
-:10268000EC830D1A8707FBE88EC154CFD52C510D72
-:10269000C4CF015AAFB99ACBD2C0E54FED0B8F0E24
-:1026A000063FBDC27150C2DFBFB2399AE4D32B5688
-:1026B000CF8906F4F7B8E8EF273FB8E79303281F60
-:1026C000AC2BBE879717DD09D44FF57F2C1E81EF09
-:1026D000F93ECD52787FCFBEA40523F9FA2C683994
-:1026E000745F0A876FE4B64ED3605E166DD79A505A
-:1026F000E6A5DD74CCCCDFFFC5ED1276EB6EB73905
-:1027000015CB6A70E0C3EB69FF36EEEBF92D5F96EF
-:10271000C2BC54FBFB08ADED8B56D8C3E9C78B7523
-:10272000C25F33C1B1EFE0F4F76E679807D71C00C2
-:1027300077A5CD43FB49C0DF0A3A9FD3733D0F60B5
-:102740004DFBFC8F82BEE7F4240FF697FD267FEC4D
-:1027500038B43F61A179BEB4FDD7B1565E8FDB6B53
-:102760006591FC7D5D51D724B4AF4B73911D9EF6EE
-:10277000C40D93819F657BF7B5523FB5768F867503
-:10278000B6EFE2EBA9B0876E649E6CF0DD5E51FFA0
-:102790007E99D7037EAB69FDB3A8B7FBA8EE33FBE8
-:1027A000DD16B4AF127ACE16B98FB18E429277C4CD
-:1027B000CAAE5E7A7D9FBFC6FBAD6E7F4ABDA37772
-:1027C000FFE3FBD6900CFE3EC526BF774E4FF7FDCC
-:1027D00013FB964DEE43AABF2D36E68FE4FDA4F120
-:1027E000E71AF6559BD86F7770F9027E51FB2D1FC3
-:1027F000371FE3F2EFBD9093A97C732DE2F349DD1F
-:102800001211A03DFD0AC7577AD2F22821CF94FEBB
-:10281000313BB1E9D50E8ED73FC5EA2519BCDD02A3
-:10282000B95F338B2719F33B19EBBD3A83F6BFAE83
-:1028300074CC81EF87D7A2BECCCCF5A7CC10FDC954
-:102840007E65FB61449C7722BEBFD2F6E3A3FA9675
-:10285000BFE3BB4B48FEBE2AE5EFAA3F9B5811AF32
-:10286000AF7A3882E409ED697DE0E555BEDE752E6C
-:102870005F7E01BF012FAFFD538799EC8FA3A6DACE
-:10288000D7F97E4A4367E03F5D4D71A3A9EE0599F4
-:10289000AFFB93A94FFB50959C4E95A093F72BA3AC
-:1028A000BFE1FAAF9C36EADF917045F335F7335F4D
-:1028B00073AC98EF41CC97D36ED597C5242F0F5E9C
-:1028C000E13CD322BC2B015FF83C38DC0DA047383B
-:1028D000DC3DFCDD756570DFAD31BF09EBEC4B5BBA
-:1028E00000EBEC200713EBF6E0E2FC00D6F37E9B56
-:1028F000A8FB636DA47F1E8C617EC88F83D3920278
-:102900007EECE7680FF9309089F791F2FB3949F4D2
-:10291000FDE008CEFFBCCE6E8F92FDD7BF5580F78D
-:102920006B523D1C02AEDF063666907E6B26BFE121
-:102930007129AF5BE283B79BF9F3962F7318C63901
-:10294000CE82A9CBD1AE268AE4504BBC372581E399
-:1029500071FFDFCDB42FB414F1BA83E434F9775AA0
-:10296000A67953E2797DAEA44B4B6B60C723E86F29
-:102970005AAEC7CFC7196C66F5D4CE2DFAF9D02A56
-:10298000BEFB9DA40B5FC7B4CE8F66CCDF03FCEB10
-:1029900053A32DF08B708CA7681CFEC7AAB319C96E
-:1029A0004BE9F79A2D6930B7970FBCF6B1D06BC5DC
-:1029B000DF9C053B22218F67D444925FEA78CD7D6E
-:1029C000312E3EDE0CDD1C8C80FE775BB9C1EF74CE
-:1029D00034C34BE372C342DA09C12AE0F1E75D7602
-:1029E00006B9DC1F3DEBDA26249E0AE1871A9B908C
-:1029F0001FA7A53EF4728CFE0BF0CDF20337269E86
-:102A00000AD1F7AA1794E7407F56E37D13DF34819C
-:102A10004E2369BDFA4DE08FB648A2FFE45BED445A
-:102A2000EF6E87E929F825EF94F2AA0986307FDE58
-:102A3000B42F22701F7FB63C223813F28AD3FFE9ED
-:102A40009DA0EBAB9144FF5A9BE0A7DA9FE5117F75
-:102A5000EDB779DDEBD0FFCF2388EEB5B1AE387A94
-:102A6000FFCB4426F98FF486DAA8604E3CC7E7C650
-:102A700068FD43E08DF31DF9836B6DE2F909C957D9
-:102A800027781F80C35F1F43FCC8645DFF6E22D997
-:102A9000535C1F25FED51FCAA3BA6EF3A62CC0FA3D
-:102AA00058194DF09D90FEB413B5F1C4DF150F2DEC
-:102AB0007D9B717A9EF0EDBC3F87B73B71D0EAC138
-:102AC000BEF471833968E3743DBFFAE4D8ADBCDE6F
-:102AD00071DF47E97A881FADE2BEBA29F8AE62C954
-:102AE000EAA9D82FFBC377456D0497B9BD74B266C8
-:102AF0007AFF04FAB933F5FF8D792ECFEF5808B974
-:102B000077DED6FE04EC830FE3F4BFE2FD85973F4A
-:102B1000DB49F2D0D29503FD7C9985F301F852EEA2
-:102B20009FCB255F063275963986F047FA78747E1A
-:102B3000BB907BABAF4CCE7F7170C77E8D8FB334B3
-:102B4000EAE0322ACD8142F473460BC66A99C01F6F
-:102B5000D7E3787F679DC158D0419776D3D25DC6C1
-:102B600079E10F7E95A5F807FF6E699B99FC2A1CF9
-:102B7000421BE05F0A4FAF219E20E40AEFE7295A8B
-:102B8000878E8FE77D97E37FC9D3C38BA14F2E8DAF
-:102B90003FF0836BA81DFF4EF1B9F9F2BA9ACFE569
-:102BA000F088F99D957C7E96493938DBD66387435A
-:102BB0000F3AFFDC2003DF9C7F7A38D5BFD0BAB450
-:102BC000280ED779298F98A76DEC341810DEB6B18E
-:102BD000D0671F91CF9726B68D85FC51F288D9DB3F
-:102BE0000AC9AECE6D2B843DA9E419F3B5E5D0F347
-:102BF000405B0EBEDF6F127E0AFAC3BC9F4D6D258F
-:102C00003CD8C57A5CF26C1EE1458D134EBFF0F9DD
-:102C10005E9F29FCDC1CDE3B7DBCFDB0AD36C3FBFA
-:102C2000E10163FD06D97E68185D069BBB0E454039
-:102C3000DEFF98D17A0D1F77AAFCEE99677AE860DB
-:102C400096F6227329FABB84BE6D05BE7FD783EF4B
-:102C5000BB52B93C5D8A3966F4CE7F7F919E0AB93A
-:102C60007FDE24FCD4FBE3793D1F7A8EC0A7AA2B1C
-:102C70003C86F3D17DBF5B988A78CA3D9926A954DA
-:102C80007A0681DF9A202FB9BC68B20A7C7CD158C1
-:102C900033EA9405F6687D4AB5A5773E0BB716D999
-:102CA000B15E166D2BB2CF0FB1779A768D3AE6E210
-:102CB0007439BBCB426E83264BE007D0A39B769939
-:102CC000DBFC8CDEDBBDBCFD59C7E177D06EE1B625
-:102CD000F862E8BDEAFB455BEF4EA90EC177DE2E38
-:102CE00023FE0BDA8C75F8A343EB4DD005C7FCF33C
-:102CF000DF15058DF551C78CF5CFDEBF6B26D8F8F3
-:102D0000A512C1EFA7033101C4A96A3E9A740CFB56
-:102D1000DAE9FD2FC5823E4B7F5FFD3AEC96455BBD
-:102D20008D7CC6E9A641AFF7EFD4883F1607C2D71E
-:102D30009D5CEF97ADC735CAAF991BCA27E1F43C3C
-:102D4000C3DA667A393FD536AC1C857848CD14CEC7
-:102D5000B81C9EABDB36DB1037081FAFBF75CF1C2E
-:102D60005E17FC559525E2DDB8865276124EDF4D92
-:102D7000BF9E84F556F97D8DF6FFCA17871D85FC29
-:102D8000EEDC33E7262A674E263C28FFD9A2835A79
-:102D90003086D79D25AE031DFCBB05018DF687F956
-:102DA0006B237AE510FF7FF5A630385A42DE73F8C0
-:102DB000171D38F4178DF75FB3CDF8DD628E2FC87D
-:102DC000FD25DBFF1111FA5CD97DE30EB69A31EFD8
-:102DD000050A7EFF750CF31221482E3AA4BE720A32
-:102DE000152EEFA3137C8732F9FCC7B588EFB8C066
-:102DF000AAC47CEB1C3617E65B6767C1680EC7B1D7
-:102E0000189BD7C99F5FDC1A43FEA985115C2F2C44
-:102E1000A6924516E33B0FEDD39FBE6B267DA50E14
-:102E200063A39F2735B27FEAE06C44FDC7A2BE983A
-:102E300005691EE0176FE8FC02C63A6B167653ADC3
-:102E4000257808F858C23A84DDC3E9E80D89C7D56A
-:102E5000F2791E4F803E64FC7E396BA3F6CB0FFCEB
-:102E60002322F479889F94EC3965579A6DCC0BFD39
-:102E7000D87C6F14EDF75C1047813FD769DE47EDD2
-:102E80006694625EFECD42FF99DB2AF60BAE9FE6AA
-:102E9000003F2D9B877BA0A7CCE57A7624F488C5DC
-:102EA00051D4AE259E917FA5654E8ED0B3FFFE62B4
-:102EB00010E3743DAC917FA4A548F4DBF2E0707A96
-:102EC0000F79A8D13811A4B7B44C53EFD3484FFAB7
-:102ED00010A0A540CF95CF07BAE8F960B33707FA3D
-:102EE0003AFB6124D9FB4AAFFD4982FE0FECFB6A35
-:102EF000BE4A0F663557A6FFED90FB5DD76611FF02
-:102F00003DA5F95E3785E8A5CE2C21E7C7967A77EF
-:102F1000CA761407A8364D7BE07A0E4FF523265764
-:102F200093BB17EFCCEBCDC1FC4F6D8E2C069F8D64
-:102F30002D15FE9E1345426E478F66DE002F5364AB
-:102F4000BF29592643991CC5F98FF773AA5CF887E6
-:102F50006346FBC8CFC6753692DFE1F3C896FD54D1
-:102F6000DB7CBFBCB60F787AF8A04CE819A756688E
-:102F70004F09B8385D797DEC7F44927FEE94DC5741
-:102F800014FE39DF8CA17D5AC549259F6C06FDB121
-:102F90009F2D1676502F9F18F960AE26F0CA1E148A
-:102FA000FA694BBCA82B3EE0F60EFB2BF8A49C1153
-:102FB000DEFBB37BD43C5B5AC57B4EEF6BB3C65C88
-:102FC0006EF7287A334B600CECC6FEE83DBF247EDA
-:102FD000AC66A2B8B51F716BEC758497FB2D81FBB5
-:102FE000381C432C02FF6916C15F5C2AFBA38AA927
-:102FF000BDD7C6EB953F5CC4BCBC7D652A237F1062
-:103000006FCFE2D09E7763867F8497F8AE324EF41E
-:103010005B3988919D407F5C5E65A1CCA07EBDA69A
-:1030200004F17D6C317DEF3789EFBD165E0ECD1456
-:10303000FA7CD7BA88C05390CF1BD272C007534ACC
-:103040008D7CD026F94695A9D92E95E7908CF53D33
-:103050007FED70DA2F9A227D75FB40B7E784FE5F23
-:10306000B9FE8E9BC700BEE7133D00EF8BA97B28FE
-:10307000DE307FED9CBB3F80DDB02B929E9764EBF2
-:103080004BB3A01F6BAE79FBF883F9338ED892F95E
-:10309000F77ADBB4733FE3E554FF9E77A00F4CBD96
-:1030A000CD4CEDA732E11F656BC53837FBBFB424AB
-:1030B000F3FE6E1EAF51CE4067A4337D05F2162499
-:1030C000FDBE0DFE851D16C966BFE0005C6939199D
-:1030D000FCF9CDD030FB885FED93FCDE3441DB069C
-:1030E000BD66E844B1BE547BF4837E5FC9127AD0DA
-:1030F0007DB254758E576A5FBD31A2333316A53544
-:10310000380CFB5D4EE97AF0D5940C36692BF07ED5
-:103110008F19B90A1CDEAE4A5AF731392EF0A9CE02
-:103120005890F22302C389AF3B2774756EE0F5CE49
-:10313000D6611EF2F9483B7A01EC2B17DE0B39A65B
-:10314000E4CB0967470CF1ABB4ABAB246BFCB161CA
-:10315000E22357F1F6550E5B27F683050F4F8F4597
-:103160009E49558B59E4736C32DAD5DCFE0D00DED6
-:10317000703B39DC1E06CF808FAA3769C487439B1A
-:103180003CB61492639A13F3AB7604B320DFAB3DE5
-:10319000911EBC3FDBE84D3C958578C4642AD95725
-:1031A0001CEF63E18F6594C4F162B6FE1CF8A1B216
-:1031B000B992ECC5E87C9DE4D3D92CC17753E04F9C
-:1031C00084BCB174A4601DCE53CF139C390EE2E7CA
-:1031D00048063C745A9D3980AB735DA409FBE694A4
-:1031E000FB045FF37566B7F0EFEFB7B028ACF7EF0D
-:1031F000E27B3E5EC51A8BAF95D787D8992526010D
-:103200007C55447C9D394CBF0FF09CFE1E2BC1FEAB
-:103210005FB56933C1A3F88259DACB12A1DFED7033
-:10322000173FC07AF9287358E951E0AF871F6ED372
-:10323000880F78792893F8E1D637891F4A83592B6C
-:10324000F311C7AA655EC411929907FE806ED64538
-:10325000FA4437D72720CF943C517283F3811779F2
-:103260003D8ABE4A7EEC6CE42071BCEE6AB453F930
-:103270004CA39359B80CD8DD984CF5E71B5D54B6B8
-:1032800035E6D2F3171A3D54DFDB5842F5FD8D5E6B
-:10329000AA1F689C4CE5CF1A7DF49CE385E49092CC
-:1032A0002B4A1E297E5272299C8FE671F45E574C80
-:1032B000DF93DC53F20EF33015F7CA2345DF0CCD54
-:1032C000E74F76438E75CC81BC28379F7DEE25F87D
-:1032D000496A1C9E0817F022E45EB7C34E723EDDB9
-:1032E000C60EC05E6F5AE1EDDC10B2AFDE5EA331F8
-:1032F0004B089FDE511FC92C217C7C6743BCA15E1B
-:10330000D1F0DE6B8378FF5ABCFEDFA0CB897B3F18
-:103310007DFCB7FCF993F77E910D7A7338766CC11A
-:10332000B8ABA37AE048407DAD95F487A151C20EB9
-:10333000C21FE8329F89F5F9E4BD7FA5F5DDD910FC
-:10334000E132F376F31B22085F1F824E1CAF1F4B46
-:103350003A55AE3BF9DC4B58E7AB6D24E7E6AF9549
-:10336000EB7223C76788BEF6490A23BD4CF3328649
-:1033700038CC27DFB305F99ECF3ED1EC010DBA0F53
-:1033800037922AF8737DE31B947FA5351C237D5863
-:10339000475E16FC047EAB211F4B6B90795A1D4390
-:1033A0000C7954D1A3BD36C807F034E8363FF73066
-:1033B000C3BA66CD9A135B40B57C5EBD51237DA335
-:1033C000475FC836131D2BB32C54FE026B9CECC513
-:1033D00066DA9F14BF7279E10D605D3417D91686E5
-:1033E000C8E1F9F27955AE894AF5BC32CB46FDFC0D
-:1033F000028B91F7FB406E866D01C939970D7240C3
-:10340000B59F9F5BBC3E6334FA99308085ACC7A200
-:103410006C0B7D5F89442FEC5F76E1FFAFED671F9A
-:10342000507AC969FCF36A829FECAD25CF3FFB3C23
-:10343000E2634B3E8A203A2D1929FD11F981B1D35F
-:10344000499FF13A343ECF6592FE65CFFE3EB6838A
-:10345000BF5FBE57F82F79D98972D9EA1AF26B2D5E
-:10346000F3F0F59100B96A8C231F7DFEA3D80EB24C
-:103470002BFCA9C82FE4DB422A4B46BCE8E424F825
-:10348000C597B3AEF5C8EB0AFF6EB9F655ACF0EFD1
-:103490008B38B98A5F96BFFAE7248263DFC524C8F8
-:1034A000B5E5AFAE4BD2FB98F7F2B0F8B58A9B2BDF
-:1034B0003FD872B6E94BC4DDC2DB5565C70C00FFCF
-:1034C000B0ABD855E4A7B030CA6358691778E80E96
-:1034D00064C7B13EC6EB19772B17ECDC0EEDB6B81E
-:1034E000E23C1CCE0BFDE4F1EDCA16FBF93919479D
-:1034F000BDB0DB4C7AE185DD31C4FFCB76FFF0F562
-:103500006B787DD9760DC3B23AD64E785AB6D7CC01
-:10351000ECA1F60DFC3689FDC3B9F4D9987AF0D345
-:10352000E236CDBB231F717957DCC01078D6497EB7
-:103530005A1AD13696E820E1FFAED48F54BBC507A6
-:103540007F6803BD78BBF3A4B7FC341ABA36FFEB2F
-:103550007A07709ED9368AE2BA8BDBF62CA37D7F80
-:1035600077B41353FCC26AF4476D96E36DCE167AB6
-:10357000C619E9FF3DF3BC99E40FE0C43AFC4213DD
-:103580007E5EF5DD16F9DD1689B7EB10541CD3DB32
-:103590007E715B676C166FFFD981F7A86C95ED178C
-:1035A0003BDA0BB15F7EB6377A7280CA1F4D7A85DF
-:1035B0008F77AE6DC2002D645D3D9F6DA5FECE6D13
-:1035C000334F06BE5840E519B5D17CCEEC4ED5C878
-:1035D000AE05BE397ECEEC7D31D644EBD66FA0A3CE
-:1035E000C92EFCA96E8B4BEA977627F48CB95CAB9D
-:1035F0008BE3F2AE6EAFC807087FAEDAD37A4B0129
-:10360000BF77D904FFCBF8BD8C2F214F84E2F13175
-:10361000B600F6D779235DB36E873C7BCB2AE831C1
-:10362000C4B50576D5BC7713C95FB1D2EA1A84FA5E
-:103630009FDEB692FF7CDE28B9CE933BC6C03FD951
-:10364000E916FB7AED46BE42F8940773FAFBF9FCE3
-:103650006A0326CAA77C3F3B83E6F7588DC96BA354
-:10366000384730077ECA1336E637434F7E2192F43F
-:10367000BBDA0CE1777F0CFCCECBDA84604E22F40F
-:103680001D49C7DA5BF9FB107AD63E15CC81DE7294
-:10369000D626FC7878EF44592CDA3549BE413FE80C
-:1036A000B7D3ED3C4FFAE5BE18063DDFF4528CF07F
-:1036B00027FC2492E20EAADF53D942BF6F92712EEB
-:1036C000FF0E011FE082DEBCD8D69C03BD528DBB2D
-:1036D00038B699C63B2BC75B1CD52CE207322F0CA2
-:1036E000ED697C2BF3C21EEF7A3A82F4D32F52DAC3
-:1036F000F763FC2F9E1E4E71F04E7760E1017ACF8A
-:10370000F5364E8725CF440401EFE74FC7509CF3B1
-:1037100073ABD0833E8F49223DE858CC23F3D05F72
-:10372000F7F6080DFE94CF35664BC6FB1D03295EE8
-:10373000B5A4B181E2044BF872473C9A97931157B4
-:10374000FE7CC770F2B37CFEA699E28BFCF9463C86
-:10375000D759F3BCEF60DDED8A263FDB17CFFC6D58
-:103760007868FC41954BB61BFD498AFEEABD35479A
-:10377000D80DD61C81C7C81CB1CFD445B73D9241E6
-:10378000F314EB95D381EC2DBE3E92E09F3ED1F633
-:103790007292E6009E83393F02DE7709BBE68BDD3D
-:1037A000568A8B2C7929C64BFE9B0D5799B05F2CFE
-:1037B000310BFD77096737510AFFD092D81CF20F01
-:1037C000717C93FDD8B5C32CC711E37EBE334DF891
-:1037D000DF83B2BEBF20003E9F92C0EEBC95F49B3B
-:1037E0006D85C0EBC5EDD126F0051FC78BB8FD92E6
-:1037F000EF7C57E0336E21E9E30C79D063112F178A
-:10380000F2B26EC33571C88761EF9A1944DF458BF8
-:103810006710E46138BE66E74879B9FF711BE2675B
-:10382000B57CBD203F68A98C9B2E7D46237D6EE92B
-:10383000FA6BB6901C7CC7CAB2391C67DB7E181BBA
-:103840004A8FD21CA157F47EEFA1F64B797BF1FD94
-:103850005BB104CF4EAB07F084D3F18ABF7FC67C47
-:1038600045DFF7F0471BDFD70B2F9FF745D6FEBF8D
-:103870003E821CD91DE9F1D3D3368A3B9FB1B62DC8
-:10388000C4BCCF3C1749F2E54CBC58EF9F7179E8B6
-:10389000B7018E6F3D44FE8DDF4C6710DD8B02C695
-:1038A0007ED5B837E488731B75899E38C433EA38EF
-:1038B0001DD01FA7CB2DF4FDBB56FA3E7C1E393917
-:1038C000426EF7ACCFE7A2895FCE0C16F438F3FC5A
-:1038D00030DA573AE3059F7378D361A79C8917259F
-:1038E0008332C2F96089B443CF4C6823BBFB8CB6EA
-:1038F00087CA4EABF86E49838CDB72BE4B06DF8005
-:103900002711B7B26F6A871E01FFF4D8622A8311AC
-:103910000997FB99C19FD8879E94EB0B6A0DE43AF7
-:10392000C537483F69B3411EEB528FABDD7D79BC93
-:103930008CE2A0BB358AFBDCABFAE1500F50FE7184
-:10394000CE8F4BFD9A17F9464BD7AE580C7E5F5A77
-:10395000BFF976F0BB9AC7520B9B0CFBAA533313EB
-:103960003C9D917CDD000FA1E365F4E2F7FE1CAD08
-:10397000270FDA99447A2629D70FE688FD0AF566DB
-:10398000DE5FED5A6D138DE356F6A4989FC2134780
-:103990008B0D7E326EE78BF7FDCC5FC1193E7F0544
-:1039A0004F6B8ED01B3ADDAE87C683DEBF3293FFEE
-:1039B000F4E257A3E212BE462F83C5D6E32FE6F00A
-:1039C0003FCFF76AC0BF42CAB7A5F047733873B696
-:1039D00019E31FB9DB8DF511BB8DF5FCBDC67AE18E
-:1039E0004163DD73D4587F04E30EECC513EC5CE453
-:1039F000B5C1CE45093BD79523EC5CD461E7A284E1
-:103A00009D8BE7B07351879D8B3AEC5CD461E7A244
-:103A1000849D8BE77F9078AA957E47D081F2AB5E3C
-:103A20008E5471705A2F17E62491FC54F1CC0B8BF5
-:103A3000F3A9DEE3CF9966277F8ECAD3B93D4E7FC7
-:103A40003387E286EDEB5340374B07F97197FF4C14
-:103A5000F8716B8B231DF02F74ACFB6C3DD4A7C2A7
-:103A600038FD1DB4BF60EDDA29F2958224373AD6CD
-:103A7000B8DEBD5ED08FFC1C2AEFA612FB5D42FFB4
-:103A8000740C8FA3B04DC6B849781C253C7E12CE6D
-:103A9000072A6EF2A4B52B05F2FEE4D3F64D80FFA3
-:103AA000A4F48FB1D94ED2BF945EDDA37F3DA83D73
-:103AB000857DFB428EC8FBEB3EC6F5ED3EF65B55C1
-:103AC000565D2A26BDB1A7BE493351DE48722CEDA2
-:103AD00043AB244CE95A57E706C8BB1813EDE3176C
-:103AE0001D26B20B2EBE6F263D6218F4F390F90C22
-:103AF0000F4419F82B6F574258FC6FB0A1FDC80353
-:103B00001961F1BF11C6B8D46D6B0EC1BE9EBE69FE
-:103B100094A15DB5EF9A303C4AB8A55EDAB47A6BF1
-:103B20003AE4CFAA986E827FD5BE48CAABADE6F024
-:103B30007A11974385A3A0C6EE9D0AFCD5B459E33C
-:103B4000B1CF57C9FD873518F7E31A0BF33B137A4A
-:103B5000F9AEC6C9BCF1FCFB7345CD3B4D9C6EE78D
-:103B60004CDB1E19EF425CA935DDC9F9EA2EAD2DFB
-:103B7000E96ADEDFDF2C7ADA304E8F746BF00715DE
-:103B800090977B32D91ADEEEE4A6176349EF967C54
-:103B9000966E754681DEADCD66B20BE0973227F4A6
-:103BA000F2436B73625496A3779EBDF4FF8AE6C717
-:103BB000E9E2C139C56EC7E121ABA0C7B589F9D625
-:103BC0004CD0FCA427CBF9AC94FB0ACB12FDDC252E
-:103BD000EBA7A4BDA0E67776F8A14217E2988D077F
-:103BE000D2CD90E3A6DD3B717EE0DE28BD64D840F7
-:103BF000E44B66FF763C1F77C907225FF78F2D13D2
-:103C000063AF86FEF99CD53385D73734FFD806BB22
-:103C10007889256083DD59F374ABCDCBCB1B76B5AA
-:103C2000D2F385BB2AC9DE5EC4EAC98E3CADF26F11
-:103C3000253E6A4AB56D4E0EF793C384DCA88912FF
-:103C4000791BE5E6F1AF212FFDE22EAD08F3BDCDE6
-:103C5000B7C756C99FDF3A4C9E3B095B1FDD6F4FCC
-:103C60002F1F087F529B887BF6B71E660473693D41
-:103C70004CBFE4A2F2B64B23C88EFD80F90A484E31
-:103C8000E487D9B36F8B3CE4EE83621DD4D8820302
-:103C9000A6639DFCDC4AEBA48ECBAF9262D8C98CA4
-:103CA0008DE3A56FBCD9C0AFCBCBA20DFC3C9B254F
-:103CB00018E2C833716833A47EDB944C43FB59B7D8
-:103CC000E585F17F71EF7B9223E30C792675ABFDDF
-:103CD0002E8DF2594A8DCF79B99AF8EC26C3F77533
-:103CE000ECD6DE76B083B7FF9AF0CC58BB0DF65613
-:103CF0008D49E4D5CCD63BE5F30E7ACE27625887C2
-:103D000043333DBF15FBA295FCF2CA2F3D1BFFCEEE
-:103D1000EC6B5FE48496E3223F14FE05437E2107AB
-:103D200080EC4F26E85027FD3D75B9C2DF53E76FA1
-:103D3000B721FF96E3DF92CA51B2AC59237F1E6FC1
-:103D40006F4F4D10F5D578BED778DE00FD5DC2FB14
-:103D500063E64AAC97F0F7CBF8BCA1672C839F06CB
-:103D60007E26D5BFEC57F1E7A2AD46BFD132F8733E
-:103D700042E8F8C93017F1F3925D7B5E1FCCF13257
-:103D8000DD175F84F553DB36CD5A997F399F29F9CA
-:103D90007EB1C64471EEEEB78F109F75D758889FDD
-:103DA000BF091FCBBCC29F19CE7F0BF97C10975D5A
-:103DB000B857F30434D10E78190CBE0CC34B6A1FEC
-:103DC000F85278EAC15BD8FB45F8C768E40D688112
-:103DD000A0BB2FBC483CAAFEC3F0C44A8C7858A8AC
-:103DE000BBDE85BC5978CCCC025730EF45981FC656
-:103DF000E7F3C3F8B75E127E1215379879C942F51A
-:103E00001E3EF189FCE9DBA618D7650FDFF8C43A3E
-:103E100099712989BEFB9FE69F6FE21B0577787E2B
-:103E2000B23ADF737A983CFF32868DA1F57F8579AF
-:103E3000C36ABF57781E7A6F09E513753B32487F16
-:103E4000E8D96F9CC6F72B6332288F5897FE392527
-:103E50007775D94E8D53C9DFBB46818F8724C1EF5B
-:103E6000BA7E6D667A47885EA2AFB392DF347D4D2D
-:103E700022959591CE24EC17956BCC3EEC839FDC7C
-:103E80003F28A9047EF875D6015378D79FDC333AD2
-:103E90009D15A05E4EE5C9CD11B343FDD9AA8CCFC7
-:103EA00015FB46DDBDC769FF3A677A3B7636D6D942
-:103EB000BA7DB148A959BAEEBDB14EAE7AB45A74C2
-:103EC000672EC5495B773A8137676B21FCD174F661
-:103ED0007260AF9EB0645DF920F8BF6AFF7EE409AE
-:103EE000ECEFFA1A6B12F4CCCFDFE7FB9F46FB171F
-:103EF000E907A7917F3C0071AB683ADF765A635EB1
-:103F0000C46F169B0F153A0DFBE9C19980E3E528B4
-:103F1000DD953B06E3077626637C8F9FF225F5351A
-:103F2000D9717DF94B54B97CABD0DF762A7FADF4E3
-:103F3000EB426F471D7A3B8242D0DB5187DE8E1207
-:103F40007A3B9E97C25F8FB86A535711EC4E7F2918
-:103F5000CBADA7FDD5910BBD7C9516E581BC59A5D0
-:103F60007906C10FC6B6A7887D358CBEAABCB68BB4
-:103F7000EB5621FC7EFD253B0BCD1F9BC0E20DF5D2
-:103F800089F61443FB72A7DBF0FE86E4E186F7377F
-:103F9000BA8A0CF56FE55E6D687FB36782A17E4BD0
-:103FA000C98D86F6D3BCD30CF5E993E718DACFF0C8
-:103FB000551ADECF9ABDD8F07E8EBEC250BFBDE688
-:103FC0001E43FB3BEAD718DE7B99D382FDED20EC44
-:103FD000298EF79FC39EE2E5AA5F653B42E93A7EE0
-:103FE000A2A9BE2F7FFCA25CA1CFDC3FDC3B1FFC63
-:103FF0009126CF81A4C9F31C77E7BA44DE00CEED49
-:10400000933DDB9E02BE096F17FE7E7CF4E18B2E92
-:104010004EC3F6DC5B6EB370F930FEAAC3A33279EF
-:10402000DDFC74D36D162E57C65F73F8C50C5E8F1A
-:104030007EFA55511F79F822DEAF7E7A83A84F674A
-:10404000A45A243E3DEE363F9FC7F8EB33367984C1
-:104050003FA4CF7C4B55020FC85B041E5006397F2E
-:10406000A23CCCF913E551CE9FD5598CBDCEF913A6
-:10407000E5316E57E2F92FB95D89F26D6E57A27C7A
-:1040800087DB9528DBB95D89F2378DB3A97CBF51F9
-:10409000A7EFFEB3B186CAE38DF5F4FCC3C6062ACA
-:1040A0003F6EF4D3F3CDB9CA4F11243F8B8A272D2D
-:1040B000431C0F7EB803D6B3A17156150F54F1BF40
-:1040C000A67AD6118D75DA6189FFD4DE1BD7EB5F36
-:1040D000CE5AD8A721FA566BB4775B2EF92F8638C3
-:1040E00029AE239F976AD3D38A79F9854B7F0AEF4C
-:1040F000671457AD8B73E31C48BD15FCF281A9EF23
-:1041000073C1774B3EA91AEEFD09BE53716C15477A
-:10411000EEC94F0989739B42F262E82F24BF45C55F
-:104120009B553ECD7576919FA7E2C92A6F46F557FC
-:104130007E8991BCBB76A385F493180B0BA27F9567
-:104140001F73ADBDAD08F902D7D63A280F6D107FA9
-:104150006E2BA6765E332FB7FF99B72FEC8D5F0FCE
-:1041600092F0F3F7047FF9259DFCAED7CAF83DBE67
-:10417000B78BF77E7C8FDC29E819BC24BFDAE3C853
-:10418000732AEE8DA7A37DB4681F447F59FFC5C76E
-:104190008BED5D3F69096D45C8A74A5BE6A07CAA27
-:1041A0006D1382747E4B77EBEF019FBE08E7EFA3A0
-:1041B00069FD64A6C14F304DEABD5F4387E358AF48
-:1041C0000A3F0ACF8A2E0ABF21794784D7FEE81416
-:1041D0004E9F70BA287A945FEAC533F074391D7A1D
-:1041E000E9047FECFF2B74186D69A3F37F11B5769A
-:1041F0000FE0FA26BADCD9C526E13C7172867E371B
-:10420000E85379C9F53AEA556CC2246C4DEABDFB16
-:104210001BDE4FFE86F70BFB79FF56A4CA47F03A28
-:104220008A385D264AF9B1AA5CE077B2DB4CF89D8A
-:1042300098BF88F451E6107A9D8BFF0FF264D25735
-:10424000BEB5E86FD200A37EA8E2C137C9FE2687BB
-:10425000C5816F927AE34D617AE1B0E1323EEC665E
-:104260006E61F78973EE65729F4E9574CEE4C6FC5D
-:1042700078D091E91608ADA338E75E8873E07EAA8E
-:10428000DFC802547E8B0569DFBA990B38D46F61A1
-:104290008CF2198F444FAD58CEFB9B386A62169E44
-:1042A000879CEB2B193E86CEF5FDC11972AEEF70DF
-:1042B000998BF486C3F64CD263B00EAC217EB43732
-:1042C000B9DC472AC311BE2FA07C8DEF0B599CC9C6
-:1042D000DFE0FB02EA37E5AE61F86E92CB986FA2A1
-:1042E000BEFF96B3945946F52F77BF55F8F210F8F4
-:1042F00057DE8A1F5606BFF35BF1579561BE6FC547
-:104300000F328932C24665C14B597DE9598A0F7B0C
-:10431000C79BC42C8997E357E1331C8F0ABFFF0268
-:104320003EE7F785CFBBA53EDA6D7F2F363903F127
-:104330002FB1FEEB5E2A1804F83F0768C84BB60B96
-:10434000BC84FB773E6B6443805FB63D8E9EDF2D61
-:1043500079E8DA8671D4FEBA86129ADF3551FAAA64
-:10436000E13877521CCCE19A03FB6C5B139DBF3D97
-:10437000F7BCD903FDBBD6ECDAE4C15A7F4B9C975E
-:10438000635F1D4947BC8D6DEF3B6FB7D6AEF0E65E
-:1043900027F88B32BC778BFD4F9C2356FBEF9008A0
-:1043A00091EFAACEB3F6B71F8F8D12726548849035
-:1043B000838A4EFC3BAAA7F27EC672B991FA5014CA
-:1043C000E9DF2509DE07804F56C60CFAABB2ABBB5E
-:1043D0000798296EBD12F1CB01B06BECE4CFB98E1A
-:1043E000E5DC023DB80CF626C743F99B55744F81B6
-:1043F0003A9711916C32DE6FE38A32DCD7129D9BC3
-:1044000060A8C778061BDAC7956418DEC77B471813
-:10441000DE274E2E36D407FAC619DA0F9A5D6AA83F
-:10442000A7E83719DAA7D6DC6AA82BF9922A1EB1B9
-:10443000B4FAB986EF8736CC37B477FB9718EF9F7D
-:10444000F17BDB73932097C45FE6C69586F73F8ABE
-:1044500015E70E263B16D27D12D9CDDF318E6FFEC9
-:10446000CA0CFCA6C669E2BE0097907F7EFE3FD0D4
-:10447000B53CD9280F273A8DF630D7D734ECBFA9F1
-:10448000F516C3F337864BBBB7901592FCFB27E9B3
-:104490001C8E97EE32E609A23DF4155EBF4E1FF169
-:1044A00010FC0E6503AC9E0013FEEED079C1DF1D3B
-:1044B0008A07F8BB43EBF0771BEF6D32D21DFEEE9F
-:1044C000D0F7A38E19E93EA6DD48F7AB8E1BE9AE07
-:1044D000F8319C3E577718F9219C3ED79C0EE30F8C
-:1044E000498FD9FC7FFF10E798895E931C1A7BCC1B
-:1044F000FDAFD3E76F61F4E9A187C34EFAE275C15E
-:10450000BC38D4CBB1CEA037C8F9DC9057EFC88007
-:104510009CB4E9D611037BF9A72945F04FF7B117F1
-:104520002321F7224618FB3F9FAA47A1FDECC48B2D
-:10453000E936F04397B8AF6FBE949F2A9F90DBBBDC
-:10454000E23CDD77CC14DF3F616AA6FB920E3BF5BF
-:10455000047C7F677EBD86F84132F3ED59C8C79B66
-:10456000F78B088A27CC1B2ACE75B2FC0ECAB3572C
-:10457000726E5EAAC863193C42C6273D229F256D14
-:1045800084D00B633C4ECA7BADCC17E708B859907A
-:104590003EAF00F8783B12F71676B708FF7D8755D7
-:1045A0009C2FF5733E455C0C7A22F4B834A947354C
-:1045B000FDCE6E07FCC3B632C3BE383C6037E45D47
-:1045C000E6ED721AEA056DC986F6230FB80CEF8B7B
-:1045D00082B986F7A38E790CF531ED2586F6571D45
-:1045E000F71AEA57774C36B4BFE6B4CF504F655D43
-:1045F0008F02BF4335618FCE1821F278F81AA57863
-:10460000D2BC0DF1E2FCA0B453951EACF27175C999
-:10461000D7E1FAF4509B4EF9BD4D29CC43E700ECAD
-:10462000D23E61463D5B97F9B44A1F657E633EAD5D
-:10463000CAA3EDD1C7A5FEADF4E1903C5A6F681E48
-:10464000ED3C79CE377CDFAB1C21CFF385C13FD465
-:1046500026E6DB748F8DCE2D28B8C2E1392BF33BD3
-:1046600077D8FB3E3FB27C84B0637F96E95B3482AF
-:10467000974F403C65F6359EA7C3CFF9ABE97B3633
-:10468000CF7DAE6F1E6FDE48319F0A93E9CE69F988
-:1046900094B734FB8590F11B257F57E76B7DCE6F78
-:1046A0005E9CC82B62713617F8B7FFF1043E936D1C
-:1046B0006C2D9D739179E7776C6A7B102EF20A5B03
-:1046C000B355DC5F16B0821FA69472FDA988DBC9C2
-:1046D000DBFFEB870EAEE73CD160213FC4FA67CA2F
-:1046E0006770CDABE71CC1506E5F803FA0ABC02EA2
-:1046F000F94B9EC89BFDC9084665B9F9AB9EFC6F96
-:10470000F2A73326F70761B7F4C16FC4876A1EFFAB
-:10471000EE3CF0703C29BB90C9BCBB2C0997C25F32
-:104720008F1D2FF1A7F2F15D2BACBEA71C94D73FD4
-:1047300019F94C8A7E31F9822F7F27F181769047D3
-:10474000FDB52B37E7C7C15FDBCD5C71CEAFF1475D
-:10475000FEBBF0A2F0DFDFF99EFEE4C36572A19F0D
-:10476000F33EFDF127FDFD13E77E42E483C82F9160
-:10477000F4086499289EBB21C6B88EED79625F78F3
-:104780004EED177E6E4F1AE504837FB9699D59CAB5
-:1047900009B16F63FFC4F305EBACA4CFB006918FF2
-:1047A0005C23653163BEA471A3118FB5D27D56D74A
-:1047B0007919E93BF31DB6402B6F5FE90FDFB7BDF9
-:1047C000F43DC56B5CB8B7C4B31EFEF7AA8DC676C0
-:1047D0008B1CE25EAF056176E92269972E0AB34B26
-:1047E000FF3A42DAA51EE621BD4CC69F159C3D7CD2
-:1047F00015C8A4BC60D8A966E12FA17C2585271720
-:10480000E20B21F768727C46E562DF5E6BE9338F6D
-:10481000AC079FFDC4C9CF224EEEC2FAEFA6F33F0C
-:10482000DD7B23451C4DC52F64FBB3FE8BF41EEDD1
-:10483000D1DBB9A2F642C4917AE21D6171936E8711
-:1048400029B604FDED16F72FA83C80257F0D143AFC
-:1048500043E29C7A87C99077115EEA6BF6515E401D
-:10486000AB45CFCC433EB2C563C77D91F73B0E2726
-:10487000E1BCF614E9AF0987B747AF1AAF8938A191
-:104880005FE8B9DD9335D273B95C6458472A9E3D21
-:104890008D0507A054F1037D6309E159C50F2A83F3
-:1048A0002504E78CA645565CD9D7F1E8EAF22857EB
-:1048B0006F5CA1234DE4A3F4175F987EC943FDDD2F
-:1048C00076691CF5539AE716E7F5D73EB8027C34B3
-:1048D0006217B3629E1D61F9D8AA7C214FC89F77E9
-:1048E000F394DC96792E6B34A1C76B4CE5BD90DC5C
-:1048F00056F58BCDB25E2EEAABD6897A87BCC768F7
-:10490000A7F437609E28311FD8C5BBA53F02F340EE
-:104910008979E039E414EA9053A8434EA10E398511
-:1049200012720ACFE7335F7A9159C441CA42D60D59
-:10493000E22065217A10E220A175C44142DB230EFA
-:1049400012FA1E7190D0F7888384D61107096D8FF3
-:104950003848689D95DCD85B875CF34E33D4A773E9
-:104960007DBF2C64DD220E12DA3FE22086FEF415B4
-:1049700086EF6F670D86EF1107096D7F6783668885
-:1049800093DC29CFA5576D4D20FEB8C9ED6BCCE364
-:10499000F4FD43F4DFEFB6C20E341F5C4CF6595DF4
-:1049A0009447D0B979B2A0BB89093A77CD213AAF03
-:1049B000B6897AB9C88BED2BDE509625E20D281109
-:1049C0006F408978034AC41B701F36E20D28116FAF
-:1049D000C073C41B5022DE8012F106948837A044B5
-:1049E000BC0125E20DF80EF106948837E039E20D9E
-:1049F00028116FC0F313887B64F5C205BD3DCB6001
-:104A00003F723E34D88F4E431D7A7B687BE8EDA120
-:104A1000EFA1B787BE87DE1E5A87DE1EDA1E7A7BBD
-:104A200068FDD00817AD33E8EFA1DF417F0FAD1768
-:104A300034FB5F838FE9E66DE78FA2EC88D19ED0CF
-:104A4000B82808E67D3C0371A48E482D3D9E2F7941
-:104A5000EB9ACE1965BCAECBFCB242D645F73BEB28
-:104A6000F2DE1A3DC8281FB6E02FC9422EC83824EE
-:104A7000FD71BA17ED65640794CAF383EA7B0F737F
-:104A80009A51AAF6BDF5BEDB858FAFDA91BC0C81D9
-:104A9000831B8845C883285AED28461EF74E932667
-:104AA000F220EF1379A8E17CF527B96FEF34ED39E7
-:104AB0001C85BC964A8DEE8BCFB1B063B8C7BBA046
-:104AC000B9BE18FAC2C7793DF7CB8F435E8C825BC3
-:104AD000F901B99CA07355E3BB98AD3A1FF7893132
-:104AE000DB02C8779BD013F01DECC73CBFE67D2AE4
-:104AF00084BF3FCD137ABFEE5F31AE9A3FCFDB5D0F
-:104B00003F0EE7B5A64489EF7EF2642CE171EA5AC4
-:104B1000ED299C8B1BBF9B7971FEF282843B6FB7A2
-:104B2000D3564DE33AE99C578FBDB22D9DCEA55586
-:104B3000B28EB264F2E56B748FB9C21B9FDF51CCA9
-:104B40008F8BF86356D247C5799128795E449D13BF
-:104B5000715B7C7B608FA8F322D78E8E2F47BE16A9
-:104B60003B28EEDDBB7974E5BA81BC7F3D20EEDDEC
-:104B7000BBF64FF5AF517DBBB8778FD8602C8D4316
-:104B8000FBDA30BF46F73D4CF5B79A06B8707E7435
-:104B90008D3509ED77330FD49F614C9C8354F0E53C
-:104BA000B37613EE1DE75BCC91C4103EE29C7A1BFA
-:104BB000E85EE4B1D27D10D32C4E2BE446F83E7E65
-:104BC000793E5D989E10960FD1B4FA78BA3903FEFB
-:104BD00024932708B9B52F9AF405A5EF54CA3CA829
-:104BE0008B6B5FA3FBAC2BF708FD40E77200F24F25
-:104BF000E547D46506D24DD01706B7162698C5FEF0
-:104C00009FCFF178C6FFE2CC1217CE31BE46F9FA3B
-:104C100095EBC6C489F33A22FE502DF1542DF35F73
-:104C200058BE33097AA7BAC7B4DC3C3E8ECEBB353A
-:104C30000B7D4EF9772A7F35EA75D0B9F271791F6D
-:104C4000C8C64A3A07149E87A2F44375DFC9E2B585
-:104C500056CA6F591CA6072E957AE0D2303DF09ABD
-:104C60007CE99F517AA0BA9F4EB6A9FCD59119A4B0
-:104C7000A7D48BFBF82AD608BD85ED11F7D857AC21
-:104C80009968C2BD1515FBBC1EAD0FFE7857EA2F03
-:104C900053306822F27C065339F3523295B32EE535
-:104CA000921CC0590CD0BFE36546FAF47B525F9961
-:104CB000813C3F9C8FF347C87C3E46FA5211739665
-:104CC000436E8CF06A47E0BE9E62D5D7218F704A52
-:104CD0002BA3F3303743AFE12F6643CF19053E775F
-:104CE00097D3B980C91A9DAFB879F40AC9D79CCFB8
-:104CF00019F8DC2FF9D647F59EFD40F2B7EEEFB478
-:104D0000D0BDAC7ECD867BD97469CF2AFE0DE7F38A
-:104D100079F2F7269843F8997AFC50001697ABF889
-:104D2000C7CE84BE380FBEC1C1929076D875E2FD61
-:104D3000DDBBC7CE5C8B1CEBFF4BFF4485FA1D0629
-:104D4000AE67419EDE7157916D7E885C292D2C6D7A
-:104D50002918D84BF7F93DE7C6F20741FF5F797F85
-:104D6000F6A0AF3BBF58C5F18CF5312FAEE36EDC3A
-:104D70008CFB703EF39625E33E66A62E9109225FDA
-:104D80006DAEAC1FDE7DE77F6E74107EA8BE39BFAE
-:104D90007CA69FD68B9057B7435E9921A7F487F2E4
-:104DA000911F64EF98047A44E777C9F3F0F21C6B23
-:104DB000983FE270BEA043B85FA22A5FC8716671D7
-:104DC000A5DF4EE7545DE4D753F07F62359E1B5458
-:104DD000E5CFA47DFDEFCAB7FF7392FE2CE6F788FE
-:104DE000499CDF1E6C6E66D23F247E2743AE1F2691
-:104DF000EF33E8A53F971AA0FFFD9A3394FEFA46D9
-:104E00004D9C9BEEC78FC372BB1EDD013F5EA3F8B6
-:104E10007D8E2773041F3DF91D1BE9DF15B6F6D7FC
-:104E2000704F93C2E3470DFF61A5FBFE58301BF79F
-:104E30004FCDAD8FA4FB5E4B0B7D8720F7A2F33DDA
-:104E4000448F9602C1671D4EDF513CAFDB74E80909
-:104E50009C1F5F7ED04DE71A2B0F14ADC7BD16A562
-:104E600085FA9B986FA5C369C3FEBD6C6D3CED6769
-:104E7000F306C9F385AC8BE2540AFF9DF9621FDD8E
-:104E800052C8E43DA732BF9E0BCA69867632AF385E
-:104E90006C9D28FF60B89F21FC3E81FED68FF227D3
-:104EA000C07F600BF12F2AFF8435F79339D83F2B51
-:104EB0006CC6F370AA4C289076AEB40317F4EC5F7E
-:104EC000F99306415FDEACD1EFD6543B5CB3AEE65E
-:104ED000F5EA6356640AB229092E718FC4FDE21EF9
-:104EE00089F97CBD42DE54C8BCA1EAAD25B4DEAA76
-:104EF00003BC4CEC7F5DDEBEF948DACBE09FA097A7
-:104F0000CE89573BBDB68490755FD5AC19CE99ABB1
-:104F1000BAA9C02CD611AE302F86BC70DB70974B6F
-:104F200005572B9087965020F8437DC7DB511EC351
-:104F3000940CF6BAB8C787C3ED16E31587F43FBFE4
-:104F4000D9785E9EB7277DC8511023CEA73BF9BC08
-:104F5000E1FF703A094E8E07C253D783BC3F178DCD
-:104F600043F4A80A06ACB0B72B903FC1EB739D0188
-:104F70002BC699BF56DC5BA16F12E3E81BE36D05FE
-:104F8000D0972C4E5B1AF027EFB5E7F0911CACE6FA
-:104F900078C1F91F750E301C3F9512DEEAE678A342
-:104FA0001ED6BCD90A7ACCE9E7FCFC7505826FE70E
-:104FB000AF9D40E79FAB2D5ECAAFD7257EFFB822DD
-:104FC000F201C407E6B46CB1BA79BDB040C899EB40
-:104FD0000A047F4DC90866D3FD342B223D80738EB1
-:104FE000B399E6D783DF87393E34DC83E223FC7252
-:104FF000BEF0238FACBAC548CF5E7862C43D462D63
-:1050000095B4DE165A749B33148EAD87B271AE67B9
-:105010000E5FDFB8778739753A6FF3E9C3B3D269AA
-:105020009E1C4EE035C6E39A84FB66389F101F2B0A
-:105030007E51E783D578330BC479C799057DFBD7BB
-:105040007BD7A597F49B264E5FF8BDFB5B97361C7C
-:1050500034E2E3DAAAC53D60E1EB54AD4FB52ED59D
-:105060003A55EBF709AB2F98ACF5CA19BEDFD6BF9E
-:10507000D0079E5A0A841C992BE9CAF17A34F45C51
-:10508000D1F7E47AAEC830AE77F447F7064ABA579C
-:105090009406B3710E50B557E3562488EFC0F7E07D
-:1050A000B7A5723CB45F49ED4D067951D5232F76F3
-:1050B000AF4B82BCD8A391BEBBF2C12369DF861E71
-:1050C000FB9CD063CFD4EE589602BF8125901E7A08
-:1050D0003F537550C887055CFF81BC5828F7E9929B
-:1050E0006CFD3B0521EBB7FA87CFE5E842BE042112
-:1050F0005F3E7EEE950FC6B97AF74F05FFFC8DBF78
-:10510000B6563A42F1A5C9FB28BAE9DC5795C3E681
-:10511000429E6DD5DA4A92B72C99DB135A489E54B9
-:10512000181F54AED5E8DEACAA86B101F3FFA05C2F
-:10513000AEDA348DEEE6517452F76FA8FD54C1FF1C
-:10514000B8847FAEE4E380946B736BDCB685B4EE19
-:10515000DDB62AF0BF7C3FA7DAF8BC874E3D71EC84
-:10516000FCF5C9F21C0BD9259BACC2BFB73B86F43A
-:10517000D5332B5F7A67266FF7C523ADE9D04F147F
-:105180001C8BA41F6F81F4C72D947A2BA7D34F0BD0
-:1051900042F25B163D29E854F5FCAF7E8FFBA12A55
-:1051A00032A43C7B509C2F9FDFB687E83667E366CE
-:1051B000AB9BB7FB4581DB20A7ABEA8B9CF04FCFC5
-:1051C000DDD86A851CF8859437E1FC5E21F3521521
-:1051D0005EB1EF6821F10BD51EF26F0F1FE7AE1520
-:1051E00091B1C87351E39C967C5C551F9F80F1AAD6
-:1051F000EA2B7F00BB47C9FBF075773252AC87F9C9
-:10520000BC3FACCB93133C74CEB642FEBE5478FB8D
-:105210003F48BAFDC82AEE114C8D6E7B9AF2169665
-:105220004779201FB2B23A021817FC0CB86D2671EC
-:10523000EF60566DC7978083ABC5949F8212F71DB0
-:10524000414D4EE2F5A74CE23C50865994D642C1FE
-:105250000F704DE13D1BD041F79F85E4671AF8D5EB
-:10526000C6B66FC4FD2BB6018C7EEF45F1A7EA47A9
-:10527000F1A7E2DFFEE6F7DF5738BF936EE987C894
-:10528000F5A4E31CC5BC8786D1FDFCDF344F9BBC75
-:1052900007AF67BE11E2770B2E9B6F968C8FF73BA3
-:1052A000DF96F2A43EE61B3E4FB54E54EE754F5CC2
-:1052B000A159C4154E6A7CFFE2DF9D5C1149795FFC
-:1052C0006A5ECAEF7DA5F9F2EEC2049937DC1103DC
-:1052D0003DB242FE1E040B8A3A9E4F0B79AEF67D1C
-:1052E000756F9892CFA7EAE5BEC83A1EC47A660DDC
-:1052F00099744FC689E69331B8BFE3E404019FFA7D
-:10530000EE2EAB38F7CA626C2EDC9FC8ED2BFADDAF
-:1053100087056B07911D79474326C9853BFCF1C280
-:10532000EF20F5FB85520E46DF55B9FE2AB4DFEAC1
-:10533000766A7C9C050ECFA75BE9FB3C0FF4C1E8C5
-:105340009669B60CD27B851DA0E2407769CC47E711
-:10535000992027B1BE4C87B2B0EF2CDA2AEC802915
-:1053600026B611F1C2A14DBE492990138F8A7B2325
-:10537000D936E3BD4A2F66FBC617026F61F791DD90
-:10538000656DF30E821CE7FA06FC4C0B1C3ED2DB6B
-:105390005F9172F2444B27DD4FAEF07AD939159BFD
-:1053A0003897DA156322FFDB959E57A996F124C53D
-:1053B000372A1EF518FE7335F064A27DADDC5C4122
-:1053C000F7FAAC6F994865F5E6F247FC05380FEB44
-:1053D0004B1A47705BC93F565D37519C1F7D2A228F
-:1053E0001EF64DBAD59F1EAA9756B76EA0732AA770
-:1053F0005B23E99C4A99735A59FC00BA6F97CE7D9A
-:10540000A976B585623F5F5237D170CE6401EF1344
-:1054100079B07F6E8BA6BC52757EE4DE287D51E1AB
-:1054200040718EE46A97383F9242ED5D7DFAC35534
-:10543000F969A3388F10722E66EA1CFE7D6DDD8B34
-:10544000B1E867E9C3EF8DE59881FF6915FAEF3997
-:1054500017B3559C8BB90BF612F4C804DFCC39C0D6
-:10546000FF9B66C27F7FE3D5E0474942EC883B0261
-:1054700071A4B7EA4166433C597732D28B4F9B59AE
-:1054800003F400A5BFA8E71B245E4EC735A7833FE2
-:1054900016EFDC928EFDE5F31851AFD839EB9790FB
-:1054A00057FAF608A19F5B18E9C3557EA15FB39A2E
-:1054B00004752F66E43CCE479B0BA3C53D3DF2FC33
-:1054C0008C824BDDB7FAB945DC17837331E0F78F77
-:1054D0002CC105A0EF475C7F851D5B2BE5D847CD30
-:1054E00066FADD113F5F28D0433E6A7E3106E773DE
-:1054F00095BE566EFED88BFB6856EE13E75471AF1F
-:1055000039DD5929FD20CBA41F64E5CBD649F8DD50
-:1055100011AE7FD1935A4BD0D617FD9648FDAAA75E
-:10552000BE770FD96DB5BB85FE50DBD649FA83D265
-:1055300047D4B9B8A5BB3B499F50DF2DDB2BF052B8
-:10554000B7573CAF44DEBAFCBD502D0BF6B446F560
-:105550007776CF9DB5C6509F43F577F2A5BFDED2D3
-:1055600045FAE003B9BF213BBC6EADEC97D7AD2146
-:10557000E3ED07138D11CF331DF8DE65D01BEAF67E
-:10558000C6D3F7C1BAA88DD8E7BDCB1C16944D750C
-:105590000EDAF7B7D59B722DA3015C94077ADC4134
-:1055A00099BF3570E97F46C27F90C2BA8EE0DED7E0
-:1055B000C34EFD4DC819F57B96EADCCB85573F1BE2
-:1055C00085FEAF1BDA7111773C58B585B3109FF893
-:1055D00075A19C477EC728F0F5C0C3423E3F6E656B
-:1055E0001BE9FE608B8FC16F1F947145FF5F4CE21A
-:1055F000F725B4E08F43F52BEB48B19FFA22447CAA
-:10560000B1C8AD7F08386ED1AC0545B0A95DE66C78
-:10561000F4AF7E4745E9A9A5523EA749FBCA3638F3
-:10562000D9013ED6BC5E3A87785FFEE12AECCBDF3B
-:10563000EFB2D3EFABAA3CBFD2AE28D25BD3064FBA
-:10564000A6FD4C7359584531FC2AA620F255BFCF10
-:10565000EC222FC01EA6D79A22291F593BF8C65FFD
-:1056600020CF53CD5F1EC1EF94A47E5BA3FB2FE739
-:10567000757FFA387E63A682058AE81EBC78FD2213
-:105680004877A27B72A7CE49F67D679BDD23F6099A
-:10569000160AFFC17BFE129B60EA85EB42D7A77416
-:1056A000AFE0852E3BF96B4B0FCAFBF6C2E0B99019
-:1056B000ECA2BC68DE8EF4CC0B0E13DD33567AF010
-:1056C00008DD9B57AAEED5B31BEFD563AEB478F8CF
-:1056D00093C987CA9582A42641B7EBE28C7662D241
-:1056E00048A127268DD4E43DA5027FDDF6F36FE9BE
-:1056F0005AEF3A5CAEE2F7EAF7A66A22E8F7A6BAF2
-:105700000F667EEDFD09EF417FE07AC1F732BCE91B
-:1057100023C7F4EE9F33245ED43E6C96FDCF90F801
-:1057200099E130097C84FDDE86E20F457F05AF3AC2
-:1057300077A4E8C6BED3FE1ACE05717A153CC4889C
-:105740004EB918FFC45FDE5E8763FE83CDDE4EDD9B
-:10575000FD6FA15310F7E05C319DDAC3E9148C1C96
-:10576000063DE161F1FB5BE1798D2C97D13A9F67B2
-:105770008E223FA02EEF05E7EBFB35AC6FB5AE8771
-:105780004EEE28C0FE78829BDE80ABC3D446CF1796
-:105790008DCCA0753884B5A7C8FC9B31D0CB9AE4DA
-:1057A000FDC73DBF63B8D841F78D5C08A8FB8F03E8
-:1057B0008F2EE4E3B6CCC827BFFE0526D77B4DCF9E
-:1057C0003DD9E2FEE39E7BB2CD7EF293CC89223FAF
-:1057D0004FCF3DD9D9E2BEEB573496837B68FDD3DA
-:1057E000EC941F1F7E4F36DF679E463CE3B19A283C
-:1057F0008A43A9FB914B9D7AE5C88197DF8FFC888E
-:10580000E69BB300FD1538A8BF8E3951CFEF146861
-:105810000EC28F73A22186EE85567CA9FCD743FD6C
-:105820009D8F024FEA5CE71F247F29BCAB736D0A92
-:10583000FF8ACFD47DECDA6AC16F3D79B2CB18F91B
-:1058400047867010A229EFD1E3029E1F8CD71B0060
-:1058500077D30A2E37C82F2EF2374F988CBFDBAB89
-:10586000CA26B92E99CCFF9F27F7A9792ADFBFC195
-:1058700098EF1F7E7F66629C6F1DC63BA7BD3716E3
-:105880000FDFFE6F739FF9233F90727974B4FE208F
-:10589000DAAB730F4A2F7CBBE8B334FA9D91AF8E1D
-:1058A000D0EF29CE75FA9AB18E22B3441CE00F29AD
-:1058B0001D744EE30F73FE9A467EE4D5E2DECF2BD5
-:1058C00085F3F273B4820F562D107986A9AC9EF839
-:1058D00036B9F77C6624E0F8FFED1C6DEF39D7C9C7
-:1058E000A34E51BE858F7EA7229C1EE3230EBFE8E8
-:1058F000E216CA1B233F9945E74EE30EAF72F3FA57
-:105900003B3FFD54D4530F5F74E35CEA4F3F9B452C
-:10591000E74CF30E5FC439D4DFFCF4B4787F0DA3F9
-:1059200038D6FB3FFD7C16CE9DDADDFA07A0EBCC26
-:105930004BF5AF615BFD60CDAD0BDC748E725A5AD6
-:10594000AE3847F916E8392369FEBA38ADF71C6559
-:10595000F748DF07787EE14BC1E76EC4C006FEEB77
-:10596000A53A47AAE46C7FF250ADB77FD73958B556
-:105970007ED94ECF462B98D0FF2F9F4FED12FB992B
-:10598000F17CEA6BAFFED685BCC3F1A3EDC4CFE3D7
-:105990001DED2EF80550875CDCFEA538CF87769686
-:1059A000D07603C439BEF1384F01FF41B73867F8EC
-:1059B000DAAB6FA440DE8FAFB7519ECF16F9BB00B4
-:1059C00031A643668CF37F00B1492F16008000009A
-:1059D000000000001F8B080000000000000BB53C19
-:1059E0000B5894D795F79F7F9E30C08008288A3F38
-:1059F000820413A433BC345BDB8E0A14A54D31DD65
-:105A0000A41A098E9120AF01D4B671B7C9C7188CFA
-:105A1000519B74756312638C1950D434B83B463073
-:105A2000A0D84C4CA4C63C96B05BE2B7DBF86162F0
-:105A30008CAF0C48926EFCD6D63DE7DCFB330F20D2
-:105A400026ED2E7EEDCDB9EF7BDEE7DCFB4FC430DB
-:105A5000634D1263530C8C19B3188BD733668A616C
-:105A6000EC591DC050EE1D665E4D246353631A56FB
-:105A7000B31C28CBCCD6A664067F6EC672194B9C8D
-:105A8000E09D6484FAC4B57AAA8FD0F4290D66C665
-:105A90007C8DDE45E75319CB0F8BCC64DF8152CF71
-:105AA000D2B5D08F69C2ACADB05E817CA32711E0C6
-:105AB000355D920D9666F986925D2C85B13A2D0082
-:105AC000B1F83F93BB15D7D1F656ED877E7D71892E
-:105AD000D62D004E4938C252B3617C7D51069BCE13
-:105AE000D8098B638A7522B4B3AD128E0FCFE0E371
-:105AF0007F5A14DE22C3F8C1E3B7E53AA0EE6E8305
-:105B0000D2C1AC8CA578A29768EF04384AC9952C0D
-:105B1000005B63976827011CAF7448D06E74452FF3
-:105B2000C99F84E7335ACEA733F63326B12899B1FB
-:105B300064AD231DD771167DA6671A6C1FD297CC52
-:105B4000622CC36A213C4C3C0178827D0E2D8C7006
-:105B5000B7C0F95886928BED49BAA1480BE063F0C3
-:105B600086B6C86DA671917F0FF537F1EF078CED02
-:105B7000EE96A95E85D5D267854960BDFA54F313C8
-:105B800088BFBA04A391CAEE6B850CE7D196A4DE58
-:105B90000DF3D8F56C7949C6E8F103560DED2B7974
-:105BA00023107432AECBEC4C81FF0B632AEC627392
-:105BB000186BFE2554FC1D6F879330FD0C8D806D96
-:105BC0003BF25383FADBB1BFBF9DD98DCC3FFE7E44
-:105BD000EB8C1D1BB4623DA4730573CF802324B2EC
-:105BE000068901FE129897E8B3DB1643FBA23FA09B
-:105BF000D30BB1A6E62DD02F55662E531695CC02A9
-:105C0000656238AC07ED89AF99DCC8577B4DD00E83
-:105C1000435335BCDCABE1FDF561CC857C3A1560C6
-:105C200006E5319BA3CE3691E6F1D23CF2211BF280
-:105C3000E324E6A1F5E3998BF6A3F69BC27A4D081F
-:105C400033ED501AD26BAEAC19139F3ADBBCF5485A
-:105C50007F5FA39D7DA20DA05378E4BA40FAD5E101
-:105C60007873E0B8F9344E1DEF5CA7619F4CC0C358
-:105C70007B897F9CA91ABB3B03C7B137A52CACEF2E
-:105C8000D59744F8C7F5371AD9274087FF68645479
-:105C90009E69B4D0FAFFD99840E51F1B15AA3FDBD7
-:105CA000984EE540A395EA3F6A9C43E5BDCB22723E
-:105CB00090FFEB3BE7B14F8C1CED37E17F4E8FCE71
-:105CC000311000F7CF1B9B8FF60B3EEA4F1EBBDD5A
-:105CD0008BEDB8CFEF737A0E3EC8DC2DC9C4971B8D
-:105CE0002C31A3E90FE733E1F90623D8120FE0E9DD
-:105CF000588E44F30F4EE270B35547F3D9356C0715
-:105D00008E3F96A3E7F34FD75462BB3D86CFDB9F10
-:105D10000630ECA768CEBC17114FF638A8CFF2C3F7
-:105D2000FDB7F376FB645EAFEE576DAFB359685EB7
-:105D300095EE833A583F83F89DE657FB7F96C7E57B
-:105D400030B4BF3B5553E41E031F1A1BEF4F7201C3
-:105D5000F870A11C2407C8459D4272A1F2A1CA7F18
-:105D6000BB6D1C8FA906C1E7E12007312407342E43
-:105D7000311EE44022BCD8199C67AF24E425541E90
-:105D8000A0443DAECA832A072ABF27829C4931FE20
-:105D9000737C2F845FD5F29495D3A5372EE21744F8
-:105DA000D76E9D055421F40742C6207C4F8E1DC638
-:105DB000153C6E6E184B7FDDB4FE8D7850F5C13802
-:105DC0007818757E3D2FBFEDF949BFA1DE46BE1D97
-:105DD000435F7D6655F515E75B9DCDFEA915F95529
-:105DE0003269A528284D9C6F42CF7F2C87CB8DCA66
-:105DF0003FBB6D8CDB4B3C67CA687DA79E67E49C0C
-:105E0000AB18E9BDD4305E1F4A5FF55C017AEFCF75
-:105E1000B82F159F8C796C1698674AADD9BA25D9D9
-:105E2000CFBFBE89D72BD07E6DB62AB49FE735325F
-:105E3000D15FB52723F592BC7C7146909D6116A079
-:105E4000E3D07103C9B757C32A5F8171ADB8D49D40
-:105E5000FE73CF16F41B5E3243B30EF6E5FB93D907
-:105E60008576CB3779E8AC04E37D3B74CC45FE8383
-:105E7000FD47521C630F824D41BB7415F41C4B63EC
-:105E80004C7EEECBB312ECBBE239991900753E5053
-:105E9000DB328CAB7F3AC26DE4E3188371B5625C90
-:105EA000D38ECFEF45FEBA00FC6980F64F4C75D318
-:105EB0005926630B9ED3111E2B22F46EAC7F63C751
-:105EC00053A796017CA15D52D0DF2894CDD45EFD0E
-:105ED00092ECC6756ACD859724F0737CEDCDCF84A6
-:105EE00041BDF3808E99605C61BB64F5C2FCAB3C44
-:105EF00011881956B15DF7D140BA5F6FFE50D8B125
-:105F0000CABD921B388655EE0A6EAFDE1B0CD73227
-:105F1000AD1F86F9B36C11B117EE006026B3DD44F6
-:105F2000BA6D8F416335A2B743F90ACD36E9C7355B
-:105F30005C1F33F645DCDDC097F2F12F933E3273E0
-:105F400078B180CF01FCD9971CFF2ADEEA84CEFF0E
-:105F50006C12CBF1C039EB8E9B2C2E38585D974CD0
-:105F6000E7F079A208CFF5610377919C1E952DE8A3
-:105F7000876DEE945DD8EEEC36EDD1C039EB3A2466
-:105F8000A645B8D3E0E678BA5681EDAB3A4D160592
-:105F9000DB8F1A980CE37D403713D271EA00D11FD2
-:105FA000E9EA92680B3F92F2FCF497915EB17E7A37
-:105FB00035EDE0FBB97080D3A7507E584BF46A965C
-:105FC000587C009D7FAF7979845ED86FC1737FE87C
-:105FD000413A57C0FE0C0AD25D263A5F00FAE0BC97
-:105FE000FAE39F240D98FDF49681DEBF52C743FF6C
-:105FF00055B7A07725736D447FEEDBD2395CC83F7F
-:10600000F8BD179E47BF37426F453E8C15FEF1C461
-:106010009AFE93B1B06059CC15E76AA89F91F00A37
-:106020004B053F418A763C6483716717BEFB18922B
-:10603000A36FD1CB36E48B26DD40EBB350E18A0E63
-:10604000B7A20C0E262FDEF52AAC931F733DE91084
-:10605000CACBEF0C1664A726218FF86704FA3B1908
-:10606000C737D0F11C9EDFD96DF01A008FACBDC0D0
-:106070003EE20F4C477BECD1A39E2AD00F95AD4654
-:106080007F1CE6C37524602394EB9AEEDF9F91603A
-:106090009CA4C4B252848D66AF8CF3B4E9AE8E9CDE
-:1060A0001BE6912CEF52BF5DB6E9B48F94F8EF294F
-:1060B000A87F9A96324758CAD7E979467AFE059D55
-:1060C000D0EFE3F97FE3E87BD5EF63AE29D117602A
-:1060D0004EC405971FAE7756CD61E24FC885802B21
-:1060E000D7BB228DD079D51DD6043CFFA7C86791B8
-:1060F000C87FEF6827C0BE6A5B25A25B1DF20F9CBC
-:10610000EB24DA37A81FF4083DF2526FFE84582CB6
-:10611000252B482AABEA96AD5E68AFEAE4FC348AE8
-:106120006F84FEA86EE3FA63141FB5011CE0A7D5C7
-:10613000215FA930D0FBA85F7FCCBA09FB7D713607
-:1061400013F4E67AA240CE881A007E19664A942596
-:1061500023C06E49DCDF52F5CA6D3B40D507AC3B2E
-:10616000D36D64DA8075EF3860098267791282FA3C
-:106170007FA753096AB779D383DAB34F5983E0DC39
-:10618000DE3941FD679FB107C1770E1405F5FFEEBB
-:10619000C59220783803CE3396DF21CA1F264841A6
-:1061A000FD172AA6A0F98BD3A383E061B3C08FF0BB
-:1061B0000355FFF4A28DFB41A1A58ADF1F5B83D7A6
-:1061C00051E3E29FCC095E6FB13D78BD6F4A977D88
-:1061D000E0F76BC1AF3F00F611CBDF82FFAF05BF29
-:1061E000BE0DFC7F84FF05FC7F2C3DE0FF63FD2B93
-:1061F000E0FF23DC0EFE3FC247205E41B8B3B1880A
-:10620000CAA38D25547F2BFCF588754F89754F8B5C
-:1062100075FF5A3CA9A5B36886E62B90D3793197D0
-:10622000F4A887ED6B060A310F30F496CC5A504033
-:106230001CEE538DB1688F2630F45B58C9D0DB1A41
-:10624000843B522C5B14B443FFFE1EB6FBDA65059B
-:10625000F5F989CE8F23719EAB5F811C66E3B88F01
-:1062600023313EAEBDCE08DE02ED0AC00B0F8162C7
-:10627000207F06F41AF64F5561B79E4159D27648F1
-:106280008FF4A8397088DADFF2E882DB0F3407B5C3
-:106290005BB03F94355A37C5F7973BD5F9BCD4BFAF
-:1062A0003655B2A35F7CF9C0BFC75560BFB6F7E3F0
-:1062B000567E0DBE3F3BF27206EA7527D861AFD914
-:1062C0003F8FB34B2760BEEFDAD44385316808DADD
-:1062D0002436038AAB6C2B5B07FAAEA6B3B516F572
-:1062E000504DFA321D4B267D24F20DA06DD15FC2B8
-:1062F000E01EF077D5F379E44A98F735CFC9BBECC7
-:1063000048BFEE372271DDC17639289E5994C5FD0C
-:10631000D645597AA2E3D5F637221568DFEC7983A2
-:10632000E35BEBA5739F10F0209484E74E99CE5D5C
-:10633000F59586F0AFCE774F964CF32DEC9C1181FE
-:10634000E7EAF3F0F596672934FFC2D415E5B8FF04
-:10635000D3094B7365F2F34031A35EBDBDB815F3AD
-:1063600003351ED93E56BCB55ACCDBA3E37CF856A8
-:10637000EAE19EC9C01FA78B26D848E78B7E5559F6
-:10638000DC1F2FD43B52D12EF4999508E4E3478BC0
-:10639000522290AE27B0C4FAA23D7A0794D5ED7C84
-:1063A000BD3E4B6F24F25B5F7BB68C7E8B3ADF4A3F
-:1063B000B1EE085F8FD0CD4574AA74379B711E3F34
-:1063C000FD78FDF22C9E2F3AED7EFF5EF453FAD25B
-:1063D000C3AD48971E3DA3F8B606E88AF6A0AF3BCA
-:1063E000B119F1A0AEB73C4BC4C9E91AA2ABAF5387
-:1063F00027FA2D6B6541FD78FC7C756FF07E2CEEE5
-:1064000073BF598676E905F0ABA1BA56D71087E776
-:10641000FF7457F0FE2A059E6B75DEB8B8007EAD9E
-:10642000ED1A911733F177972A1F0AD153A5635FAD
-:106430003AF7DBFA120C6E8C176B0FB5125F8FCE2A
-:10644000EFF426A39F9FF89091F286B78A67553F95
-:106450002020EE6118C7E98A527235D3FDF67ED04E
-:10646000667F3E6B22C6432514EFF5B1A10A34FEC8
-:106470004EF483A350EFFEF1195C77B81DFC3D5834
-:10648000D769EC5C741EFCAC612B080AEC7B789736
-:10649000CE2DE21333FAA715C23FFD5471E4C96053
-:1064A0005F9DEB3574BEDA8C30EED70A3DF9D9A189
-:1064B000E49F20BFD69E922D46F443216E21B88DD5
-:1064C000FB05759EE47F9A8BFE769B8EFC00D5EFD4
-:1064D000700ABFE382F0672FAC1FD293BF7A5C6271
-:1064E0004FC13E2A3BB7F52442BB336311F9AB4E93
-:1064F000B98DF28FAB7604FB0555EE60B8E64030FF
-:10650000EC0CF11BD4B8ED44D688FF3013E38F02B6
-:10651000796E3CCAC107829E6A3CB27696351EE50A
-:106520007DB35659A4E603104FF5C70F57E17EDD42
-:10653000B561568A0BD61D257C0E7EC1E38EC10443
-:10654000C6FD23C6F13AD8C9F9BB5E27F13803D896
-:1065500095E6334AEEF5D034E81A8E24BDC45811BE
-:10656000CAC39AA53C8EB463CE15CA17845E0AB519
-:1065700097DFD70EC8D101FAE17C16F737F3F5CCD7
-:1065800081766A6D8495ECD63423F7B70B1EF6D866
-:10659000900FA6417C6C08C8674F330F49D86FEF46
-:1065A0002310E266FAE3FBC55A8B2E3AC0EE31B6F1
-:1065B0009EFAABF38326E1E36F35BF05E637FBE7D1
-:1065C000077C4721BE3FCFB1923D4E5ACC582FC9D0
-:1065D0006303C9A37A9EABC067988FC59C09D2ADEF
-:1065E00076D7EB940776B25E8A470A23F93E0A71A2
-:1065F0003F0887F19265737CD9B3B9FE589B1D6C37
-:1066000097BBB2ED5236943BB21DBA6CD26716E21C
-:10661000CBB58257C04F891F1843EFAE7997C75546
-:106620009F831CA09CDFDF2029A9417E10E7EF7A21
-:106630005EC5AE304FFF5CC483CBDE9B1E877114FA
-:1066400097ABE5EB4C4A6A009FD6239F035E2A2D49
-:10665000553F42BFDBB12E4EC17C7F3DF2FD7444FD
-:1066600023E7EB58F887F1C5283EF704C3F0B70BD2
-:10667000F9AB8E19AC6847EA3B43DBAD5ACCEBA4CF
-:1066800064831C84FBE52049F065B34372A3DE6F8D
-:10669000BEA1E579AC5289F256F74025F225FD619D
-:1066A000BFCA796E9CFF1E00311E62DB63496EA873
-:1066B00011F4C8DF8BF3DEA3F5BE8E727C52E7497E
-:1066C000C67CCA49A7D18AF32F65E070807E296510
-:1066D000BD54F687D775786972D7548C9B3F701874
-:1066E000288FD3BCA12502F56926DB60B9908EC640
-:1066F0009D1DB8993DBE5F018CC42EA874A1BCD06D
-:1067000056118772BAEEC8B6CFCBCE1D7F7CCD1F97
-:106710003AEEC290A2E617ADFA78CE36BDE9797EA0
-:10672000FAD5334F3AEE57A5D708FD60CF53000F87
-:106730004BD8501EC6352ADD8CF06F2CBAA9F84C08
-:10674000D20DFD1451067689F44B283D55FCD6B187
-:10675000061DCF7335BCB714FADFB741A3A07F384D
-:106760008ABEB7A083D7C49BBC1112C59BE3D14599
-:10677000A5874A9F33D17CDC99FB65CAD3FD5FD3E3
-:10678000A52BDBF1D0D7C963A8FC8D276FCBD785AC
-:10679000C86588FCA9F472AC8B243953E958AB3036
-:1067A0008A5B6BBB23AC6EE6A79F19FE21FDF09EB2
-:1067B00082F231ED12DB297D13391CA07B8D50FA5A
-:1067C000006FD851AF3F951D6C8754BA8DA77F5489
-:1067D000FDF521F39EB448743FC0E5F3970637DE1C
-:1067E0002FAAF703EA3DC061A1F742CB0FC1EFC06A
-:1067F0007B972DE97D13D15FEBD7ABF3F0FBC70F90
-:10680000D7F74E5D0DE33F9CC7CB7EF4D302607B90
-:1068100018CFC37D38C9E042BC7D28CD9C8F76FC63
-:1068200043E9A1BB381CAF57105E1A3FDF0270BFAF
-:106830004ECDDB3D2AF4B09BEF63E9EC7CEA27B157
-:1068400037111F8AC44A681D498A2982FD7CF88B4A
-:1068500019594DCC7FFE966CEECFBA55FDAEE6B120
-:10686000FF41A23CF672300116CCB7CF7FB6683A32
-:10687000D49FFDC7141BDDFFAD095E1FED6832E537
-:1068800007B7D13CDFFF6A48B722C3BFAF11FB9700
-:106890007F8DD797CFA078A252D0D01E3393C7B1A7
-:1068A000EE9428B447AA7D1A3E75D81C98BFBC0444
-:1068B000F68BE903E0994F2605DAB7D7F7FD3A0DD5
-:1068C000E7A9D4BB32AD184F363F9F847E40E5BE6A
-:1068D000C7D3C82FDDB7390DE38BCA965FA7D90997
-:1068E0000E77507CA3E5E7BE72F0CE3D5B02FCE084
-:1068F000EA5C99F65F6A7CBD00FDD345777CF618AB
-:10690000E6C367FCA34479B1FB59EF636837CBD288
-:10691000B91CB1ED46D2EB301FDD3BB6CEFCF15ECB
-:10692000D4E7A7D33FD69543BFEBD95AC24F1973CB
-:106930003F118FF9B04D12E5C3FCFDA7D23DE68AA9
-:106940000D923E2116ED61B44D56705C34EDE3813D
-:106950004DB61EAC2F7B98D72F32B8DBFB709E67ED
-:10696000F5D65605272A995E12702F7C3D9BC75D90
-:10697000CB9F90C81F57D799F14C5C73E039AF0B90
-:10698000FAB31BFF46FAED27822E3F7AF8FD371344
-:1069900014BC4F72DC443DF2DED31752517FE5C781
-:1069A0005CCA403E9FA177ECACC273B718287F98B1
-:1069B000939928C743FFAC9FCF7B0ACBE50FAFD895
-:1069C000598579D01D468AA3D4FDAD91140DC69B7F
-:1069D0006F34FFEC01C4DBC5A78DE447AF69BE2D62
-:1069E0009E8D21A76AB91FE8AFA431F652A391CAC0
-:1069F000971B2D4C81231E6C4C20F85F1B152AD948
-:106A000012CE5F6B44BC3ADE7CD910EF2BA0AF7284
-:106A100036C17CE06FDA4CF6C93980AF19B73B5B01
-:106A2000368B73CD80F13657F202C443CEE6D53DA6
-:106A3000E88AEA73787CF476DFA624F2A31F3EB7D7
-:106A4000BB0ADA17E794A4E078E3AE6B14E7BFD192
-:106A5000F57819E5F55B0CFC7CE2DC179F4E8BDFCB
-:106A60008979D7B774147FD7EF3AB77B33942B9FCC
-:106A700058AD0FE4F76F7ADE64B19F5BC9D57878C3
-:106A8000F8F672F5EB24929F1690AB8CBF5EAEEADF
-:106A90001F5E4FF87B28A764510EECFFA2CE9584B1
-:106AA000F27471E6F788CF5DC725C2BFAAC7D5F1DA
-:106AB00045E2BC351ACF13E40F0A3DFE25447E881B
-:106AC000DFD7BB3E4D437FF8CBCEA55F7BEE238D5A
-:106AD00078838E792D2395A1ED797A478A15CE9703
-:106AE000A7E17EF028FF55DCCFA9F7EDF88779E123
-:106AF0005A613F9DB0B1A818B47F92372C13EF397B
-:106B00007E78498BF117C4751F05FB97ECA3003BFA
-:106B10003EDE7E6F55D6E13C5ABFDE9D7D46C3BC4E
-:106B20000176FBCE8130E60D587724EE30224F43BC
-:106B30001CDA3589F402D20DEF657C5D335B10BE43
-:106B4000A4E774F41D81F88AE755989CE73FE7A510
-:106B5000AE2B99A86743CF5B77F40AF1476DE7E363
-:106B6000D7243AFFC24BDACC5B9FFFF57D573291B9
-:106B70007E977403791847F9F403994887BA635CE0
-:106B80009F7F5B3CA8F5559BF43CBF2759281E2CE2
-:106B900090AF521CEF3BC5E3F8BAAE3DA44F87BBA4
-:106BA000793EA55ED35B188FF98786733DA8CF86A3
-:106BB00013787C05F3DB116F7353841DD40E252DE0
-:106BC00006BDF6CA083FF0B8EE22CAAF1EE7F1D400
-:106BD000D27BA4CC70867EC5659467A82F5B97BCDA
-:106BE00011F9FCA27B226682D8DB99FF5347F9B7E3
-:106BF000D7C22D32F9AD501B40BF9173B865FE70FE
-:106C000086A9717A38B307F4ABD72B3FA1F8F834D3
-:106C1000BF27ABBF9DCB133BCAE5C9B9E1757D4228
-:106C2000C07CBB519E68DFDC7F5CF4DAFF905C7651
-:106C3000DBECDD2897E1A80B71BE8428B724897EA0
-:106C400079FE7B4073B788C78B646AAFEF94D92411
-:106C50001C931041F7F5456CAB16FDDD45CC339721
-:106C6000BF9319F8CD77A1BDF835391BDF6381FFDC
-:106C70004CF7C785618ED435E81F692481574FCE04
-:106C8000E2407B26DE79CC9525B2634393C2C94F9F
-:106C900059B8C4598AFB1DD10F5ADE0FE6213F8B2C
-:106CA000B98732F13E93798732F19E53ED77EF6BDE
-:106CB000E10D64179927E7DE8075C272B9DDFC1C0F
-:106CC000EF9F419FD48BFBCF02F9C6331847AD39F4
-:106CD000CEEF09FB35C91FE07B2D17E019E97A05D6
-:106CE000E86A47FBE360763BCACFAC896E949FFAB3
-:106CF0008312C3776B755D8616CCEBD4E906E29000
-:106D00009F3777FE418FFC5CDFF1BE5E9985E379AA
-:106D10001E08FC750DE2B75ED82F67E76D1F60DEB9
-:106D2000CD798A5B51A7F67D8AEB6BDA0F51FC5E59
-:106D3000CBBC14BFD7B605F3CB7002CFB387CA471D
-:106D400058AE42FA528517EEE07271AFCC1A28DEC7
-:106D50001779D38509F1E48FF8C7093F51BEF218BE
-:106D6000FA2F83D325AB04530D86B936A05FE44ACE
-:106D7000E3FECCE0EF5ECEA920BDE2CEF929BE8BCA
-:106D800011FEEEC24DDBB472C07E1676F33CE160BC
-:106D900018AB3C42F4764C413A446695987373497B
-:106DA000AE32E99D8F86E73543CFF1A4C8679EC612
-:106DB0003C4F867FDFC589895C8F3137F14F8F86E5
-:106DC000AFAFBE7B51C7AFC89582E2A53512CF4F9A
-:106DD0008DA757F01EA55CDCA3948B7B9472718FFA
-:106DE000522EEE51CAC53D4AB9B8472917F728E5D2
-:106DF000E21EA55CDCA3948B7B14AC3F8D5BA5F7F6
-:106E000070CFEF44FBD9833236D90FF7C784C093D4
-:106E100083FBF7C748C1F06489FAE7E43EBFD39526
-:106E200081794C8B906F2502FDAF8B269E5FEA8A9D
-:106E300070FC1DE2B97C61D33EFE1ED14EEF59F2CB
-:106E4000639696A27C0DC71A18EAA1865CC7BC5C43
-:106E5000A0FBA9530B52B7917E3459F19EBBFFBEE4
-:106E60003BA2282FF796CC6458725E7AF6861C8077
-:106E7000E79925E25BD013DF2951E3499867413751
-:106E8000BFCF28906BCB71FE35934CD9A87787B2D2
-:106E90001CC5B901FC583879552AFA413D3AE50339
-:106EA000CCA7BADED5318CA3D4FC9BDAAF276BDE3E
-:106EB000521CB7303D654316EA1B102ED46F763D49
-:106EC0006BC37DD935E15213E92B458BF2BF54F0EA
-:106ED000EF7C85FBC35EBDA28DC1B83D6C5EAC4B43
-:106EE000E1F755E5E2BEAA5CDC57217DDEC1BC19A5
-:106EF00094EF413D96BD508F65E87BAE67724A5670
-:106F0000E652BC3D9414F81E6C11CA15D73349C81B
-:106F1000CF3B05DF26083DD3935D524DFCCE3C347C
-:106F20004F8DC8BF5DD105DFE3A9E3FCE319957779
-:106F30007F87EB6716A5E7EF5DA73017BEA7BDFB00
-:106F4000D549944FF2B9352E5D14C020E3A8BFD8BF
-:106F5000AB3CBE65095C5EEE3E1C4FFD9A441ED400
-:106F600019D39B16837657C8950A1FF90B7FE7E361
-:106F7000CC0218CA63123F9FF3EEDEB468807D92A4
-:106F80004983F971670B6FEF1372E79C2EE613E7E5
-:106F900061464F12D263F0F8AB490F00BCC5ECADAF
-:106FA000E0FADE9B467A9A79D3F0BDD015C9731604
-:106FB000DFDBAE3A92B50CDFD75ED17976235C7316
-:106FC0002487C3D2A1B396C0F6899E247C8FBBEAE6
-:106FD00048F6327C9F7B65E2A1DDD1D60058F7CA26
-:106FE000596CD73F9AB32C1FE06283FB5423F2CD38
-:106FF000BF72FE321DECB880F8A9E9E2FEFAFC830C
-:107000001D575F417BDC1141F7F507729389DE4D17
-:107010005DFB9F407EF31DD2911C6C69FBC3EE5F4C
-:10702000513F03A5518A0D9E1C4CB934E4FDC77D28
-:10703000B86E71B8E70B84D7E7FD80F6513C81CB81
-:10704000F3C6BCF9CB503E7D1D077F89F2571C0566
-:107050008E2CEEE76513D1A7FAF0CC7CCC03F82296
-:107060007ACB70FEBADF1AACC8A7D587E3E7635EB8
-:10707000A02397E7A7AB6EDF9A84F65573F4A57D3E
-:10708000BFC23CE56F4D743F531FC3FDBB6AB939A6
-:107090006F35D16FCF3E7C37E27BC944F7A45530C2
-:1070A00007AE57B56F06E5D58FFDF9E332A44381EE
-:1070B000BC6B1FD67FB1D7A4413CF4E9ED51DF434F
-:1070C00039ECD3519C5925E0AAFE097C3FE10385A8
-:1070D00044BFD8AD49685FAB27FCC35DB8EF6279A8
-:1070E000EB6E8C73D87E03DD155C7A09F006E32E17
-:1070F000B5EAE895AAEFA5082DF2CB15696BD94E34
-:107100009CBF95F7BB62DA4AF874B5DEC6703DE8FD
-:10711000C7505F5D91B605D55F6ADD9F8971E8E56F
-:10712000DF16533CAAF2F9489CB1D710640F4913FB
-:10713000C489F71264665DCC0C76B64A80978F3CA2
-:10714000E7DBC9FCE32FB7E9BC7AC05195816DC07C
-:10715000F7C1AA3C5427FEB008CF57AD694E437F14
-:10716000A52A7BA00CE5E292891913A0DFDBC25EA1
-:1071700055B7AF5F8C7EEF78FBF98BB03F5F0A3974
-:10718000FCB2D3E40EBC1F0C2DFFD8C8947702DEEE
-:107190000DDFDF6020DF5D9DEF6DBDA716E3B3BAA5
-:1071A00018AE3FCE42FF36D0633784DE5BBE2EB8CA
-:1071B000FFB5DC18FE2E553F9086764F9DDF97ABCE
-:1071C000EAB58134D457A1E38A65A16F5E9648DFA2
-:1071D00054B74BE764C053B5D1E5C6F73BD5184C5F
-:1071E000F2736A6F4A7C5C429EC03B8C7D3C2F9957
-:1071F000CE5DDD66B29B605C4DD84024FA43B5118C
-:107200000391E8E7F88ECAAC45902B364ED067BAAA
-:10721000205940DEB1CAA3B39B32C7A033FA4DF860
-:107220003E07FF1BD6DF95379DD6ABEC0CA7F59834
-:1072300065200FF9B47257F0383C972540FE7C9DCD
-:107240007BE202E3F164B1EF41E91CC9C9E09F3F71
-:107250004A42BA576BD806BC47BC2CF1EF1E00A6B9
-:10726000EF1E2E8BFBC8EA3F99C3905F2E7F594BD0
-:1072700072EB930648AFBD7BA484F4814F37407A0C
-:10728000ED44DEBDA4C77CD10365A8A7DE3D52C195
-:10729000DB270D9429D0DE8630B64F6564EFFF2BD7
-:1072A000CF49FAA358E6EF1BD81E9D85E78136F536
-:1072B00037525CA15302E3EE3FE6A9F7367AFFB9F5
-:1072C00065BFDCF89872B01DE5B0D24CF91CF09F98
-:1072D000DA5E413F6F699C15F3E295388EF3813E8B
-:1072E000F0FE2F36E67A05D2675994A3202F17EFC8
-:1072F0001907287E00AE263FBDEE77068A23077564
-:1073000043FB504F65463916E6017FD5EA7B37A22D
-:107310004B7F5537D083F77E8B64AE8FD87ECE57A8
-:10732000BE8C3DFC3B09717FB854E01FEC166B46E8
-:10733000BE90387DDFE83CFC0EEA155F6F0AE9E39A
-:1073400050B9B9D4F95424EA873360C75D0171FE9E
-:107350009915FBE99E7E09BECB80F2810DC1FC3000
-:107360007CE3A714EFB12702EA910FB707C3A17C12
-:1073700084FCE80DD23B2E92A76773B91F5633BF2A
-:10738000B70EF13002DF0DB01C009F088143FAB345
-:1073900012EE273C8BFF8D789CEAEDA7F8FC207F4E
-:1073A00017DB04F68BE08E70BA37D61C04FB14CBC7
-:1073B000ED13DA859AC85ECA4BF93A0C743FF2684D
-:1073C000D7A7F49E11F890F22F355DAFC661DC7E31
-:1073D00000E3845CB28371F44EA5A32B0EE30DB5DC
-:1073E000BE56E34913EFF1C94F57EB9DB2370DF786
-:1073F0005F23F56662FB01B1EF5A0DC032C262DF56
-:10740000129777D625933E0FA5DB0EC1AFA017329A
-:10741000E99DC5519E1750F54095D02727B03E8372
-:10742000CBBD45BD5792F0BD5CF898FA213E4FE8C0
-:1074300037D640799BED797CDFEA789A97E795A873
-:10744000BDEED895CCE919384E19790739A2875283
-:10745000FC7A05E53F81E4FF515D1C9CAB7AB76483
-:107460006D423D55BABE10BAB355DAD585942F1387
-:10747000EF3F43F715CA4756D80BE9494D74416CA5
-:10748000C07C97215C4FC8223D43EFE81F8C7DB242
-:1074900010F3133F2BDD46FC3C626F02E51CCFB3BB
-:1074A0008BEB71149B9B9AD17CBCAAA17963FC18CD
-:1074B000FB08DD6795A3B9304E195DAFEEF7B24911
-:1074C000DDDF7CDDC4403C2C595F3811CA55C6BF96
-:1074D000160FFCBC97BB0C5EB4AB55A5AB37468D05
-:1074E000C137A3ECC1AE00FB351DE9EBA67B8DF1E6
-:1074F000F61F5AD64ADE7ECC133190AB56922F90AF
-:107500009700BB30272F24DF50B9621AC69DCCB13B
-:10751000621ADA1990AB32EB1871257E59A2A1B725
-:107520001B2E2A43F7733E8FE749E7E47179E9B6EA
-:10753000D97DA837C7FBDEE2BFC53EC6FBDE2251C0
-:1075400033FC1ECA5B625C8482F740050BC279BFC4
-:10755000E3260BE66D068F5FA7BCEEE063E625FC35
-:10756000BEC0CC26417B4FC2AC96403BB275365F65
-:10757000273C87FB2DF5E9BAAFCF0B65448CE4853A
-:10758000C86FC808A77B125FE7E764B706BB732D17
-:10759000789FE1EB85E810E4A9FECFFF1D87F6D5C3
-:1075A000D7FD09BD07F3DDF894DE896D16EFF44EC3
-:1075B000748A7756BD4A047D1757F47121F6DB2291
-:1075C0004A7F7E80E789D5528DFF03E2DFC9B3C7CA
-:1075D0008E7F631CE6C0BC80123F561E25302F9064
-:1075E000AAE579012C312F909ACAF30208635E0054
-:1075F0004BCC0B603DE60510C6BC00C29817401886
-:10760000F30258625E00EBBF10DF3F0C8262E2F9CA
-:107610004A33E9F5B5F8BE1DF0B7F638BF775ADB47
-:107620002AD3FD2D7EFF80F66DD4BB9976F16EC610
-:10763000B38DEEF1EA3B642B92A85E377412F338F7
-:10764000F58724EB7AD42B8D4B68FDCDDDB91F94E3
-:10765000627DABCEAA51888F381D9B257AA75FDD4E
-:10766000DD4A79A7FCF8E37AAA6F9318E649EF356B
-:10767000F038D729436D16DD83921FEC34F452FCA9
-:1076800051734052CA03DF69CCB9467A40BD4FAE50
-:10769000E04DCCE93129E563BC031979772EDE4D45
-:1076A00057E03D33BE17976FD0BB7E2704A41390DD
-:1076B0000F77F0F7CF16F847F21EF2AEA9BAFBD05B
-:1076C000467C0F157ADF3CF23D5DC8BD73D96C7105
-:1076D000AF6CE3DF57143D5D7EB003D61BDE6A203E
-:1076E0007FA321D7F120F2D1499D9DF223278F9BC3
-:1076F000282E3ABFEDB6A0FCC85096A37A36E59B7B
-:10770000A650BE628D4E227BBCA028251EF1B8E09B
-:10771000948EEC4E4F56492DF65B334BA17C548131
-:1077200081FD82E611EFA5547A1434496E0DC02B09
-:107730009895DED92F073461BE725067DE84EF9AC8
-:107740009633FECE41E59B35DB24E21B4C10203EF8
-:10775000CB043E9777FFFE3ABE635869E07E6BA28A
-:1077600086DF5F276EE1EF191E640E3DDAD955C83A
-:107770005D32D9C7DF0D40BD237C4A12F7CB957827
-:107780009C7FC5691DBDB72D88FF719A83EC743E3F
-:10779000BD6390BCCBE49B778C2F3FA1EF184EEAE2
-:1077A000B85E013C523CD4837C4979190795A71BEC
-:1077B0002BA9AC13DF438C7EFF3F7416E3C4C4F8DF
-:1077C000082BEAB971BF770BFBFAEFBD768AF76B2E
-:1077D000899ABE6C05F1F127B315F1A1BE13ECB681
-:1077E0009534239DEC91CC65A1EFC14003025E0B63
-:1077F000F12012E6B53D76FCEE68E8B864A177C9E1
-:10780000A3F4E3B6C7F09D487DAA649114CC7F6FC2
-:107810002D88837D174E4FA67DD777F2FC286128EF
-:107820000EF3E79C5E91598EC3B373FDF5C5426EAE
-:107830007CD09FF3C977DDC86FDF206FBA17FBBB21
-:107840009889BEA7A63FD84FF11D53297FAAF2CD34
-:10785000705B7C0BF2CDEF67F338B2B4F47D1DDAC8
-:10786000FF9E6CC709DC4759F9B5C7E2E87C63E7BE
-:10787000AFD477EAA1F9AB40FDF9FFF13EFD9DC61B
-:10788000062ADF6B5C47656FA38BDA03F4FF7F8EFC
-:10789000A3FF43F39FE7B05F68FE93199528B29F5B
-:1078A00020DF3CDF1C92EF2C9AF0C026C0DF82ED77
-:1078B0007A2B56A9F94F7C3FBCD64CFAE0F2EC315A
-:1078C000F39E2ADECC94271D66A62CC4FFFCF4147C
-:1078D000AD06DABF107450F38E281F783E940F2C3B
-:1078E000513EB45ABF7CBCA00711CEE176DE45768E
-:1078F000DE4474DDB81EF407C02B9925487F5C0D6B
-:10790000D11F1070DC47DF55751B18E609D5779439
-:10791000F3A1F82A6B0C7DE2E1FA646A98E725FA94
-:10792000DEBF2E8CDEE79E14EFE14E6EE6EFE1CA7D
-:107930005909AD3B865E89447AAC9C3074F679E88F
-:10794000BFF2D766F257364EAAC8FB5BF4CAE06CAA
-:107950008E8F67F17705B45FF7BB024F48781FBA87
-:10796000E67E66433AABBF2B102FEEB3BFC5EF0ADE
-:10797000DC3667E237FF5D81CC39F1A581BF2B9002
-:10798000D93989C3EAEF0AB0F8D2717E57207B4E0D
-:10799000EEE8DF15983D87C739E3FDAE00F8937335
-:1079A000707F3A9BFD4E2C13C53E43BFA73D2DEE85
-:1079B000EF7A348E522C0B235D5AAAD7B873B07C61
-:1079C0005BE3F939D6033FE7E33E0A9FB2DD9E0E43
-:1079D00070A2C1437AB227CB5E80F583367B21AE9D
-:1079E000139A3747DA627C0FFB5984EDA1EFAE544E
-:1079F0007AAE98C3F9FE0151CE6D1AFB7BF207E611
-:107A0000F0EFD56EB56FD8EF7DB82F75FF6CEB8AB0
-:107A10001C92A72CFB32B1DF522C993926E8FBD4FB
-:107A2000D17CE612FBE2FC05FAACF83CF707A94C66
-:107A3000D3BAA3D17F9CFC883B1AF73BB979C884A1
-:107A4000DF41BCE81A32A17D7FF1E12113D6BF6886
-:107A5000E7EF9543E77F710EFF4E206DEE108D9F8F
-:107A600006FFDD4BFEF95034FA4F6995E737D27DBA
-:107A7000CB8199645FA609FB32ED91E99D03C06F4C
-:107A8000D39E8BA2FB6C961F4BEDD5462EA7D58FB0
-:107A9000941FE950E8BBADE2F301FECE4C37EC3B5E
-:107AA000C8FFD20EF3779700239E0EE808469E4546
-:107AB000FFCAC9F8BBCBC9426FA09F560A7AC15909
-:107AC000F9E675BAF7C7F1381FDED122FF75EA86ED
-:107AD000C5F769168C43572D59DF4371E18E917AB2
-:107AE00011671EDA887133F86F41F5D5E5AFF7A05D
-:107AF000BDA939105CEF6CB846F12BF86F41F5F772
-:107B0000FFFC9C9EFF7E41703DD07707F29B4ADFD1
-:107B1000933ACF4C8CF34E3AC3ACFCFDBE877EAF9C
-:107B2000A4457CFFBCE79FE7E7F0F7A29CDE30DED0
-:107B3000FDCDF8A389FABBE6B37494875B95AA5E82
-:107B40001AF9FD133D73517E6F5104E99D7A115767
-:107B5000D5955BC8CE27D619497F15C8615684478D
-:107B60007EFFA448167ACA43F2DF775734E5F1E87E
-:107B70000008C7CCA27B9FB8260E0F4D34907E28FC
-:107B8000D094D4EE87F24D4DF077EC2FA07E90513B
-:107B90007E793EB55EEFE1DF896B955C8C739B244B
-:107BA000FB73F8DD639324F2885566BA2F18C4FC82
-:107BB000229C677BB4FBB90A5867FB3D19E41F0F91
-:107BC00032AE4F5D4BF8BDD5F6E892D2D5D8BEF4B3
-:107BD000766A3FF297942773D07FAA0AB3A2FFB4C4
-:107BE000DDC6FDEBED8BD3A9FD98A4ACC773BB1E1E
-:107BF00061B4CEF6C5FCDCDB9F9C2ABEBF709B50F7
-:107C00009EB737DB27E17DD47C8BE30CD26BB2B817
-:107C10008FDB9E0CF5503E23952C7D10E799C5F720
-:107C20005B6753885E2797DEFEE43E85CC8817EFBE
-:107C300085EA1745501CFCBF93011353F046000022
-:107C4000000000000000000005001500000000001A
-:00000001FF
diff --git a/firmware/bnx2x-e1-5.2.7.0.fw.ihex b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
new file mode 100644
index 0000000..a99c41c
--- /dev/null
+++ b/firmware/bnx2x-e1-5.2.7.0.fw.ihex
@@ -0,0 +1,10178 @@
+:10000000000028B0000000600000068800002918E9
+:100010000000161400002FA800000098000045C042
+:10002000000073C400004660000000CC0000BA2845
+:10003000000099A00000BAF800000094000154A04C
+:10004000000057BC00015538000000B80001ACF8B2
+:100050000000CE2C0001ADB80000000400027BE8D7
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000060400CC0000000418
+:10010000020400DC00100000020400E012140000F1
+:10011000020400E422140000020400E8321400008B
+:10012000060400EC000000040104012400000000AB
+:1001300001040128000000000104012C000000005F
+:10014000010401300000000002040004000000FF70
+:1001500002040008000000FF0204000C000000FF81
+:1001600002040010000000FF02040014000000FF61
+:1001700002040018000000FF0204001C000000FF41
+:1001800002040020000000FF020400240000003EE2
+:1001900002040028000000000204002C0000003FC0
+:1001A000020400300000003F020400340000003F61
+:1001B00002040038000000000204003C0000003F80
+:1001C000020400400000003F020400440000003F21
+:1001D00002042008000004110204200C00000400A6
+:1001E000020420100000040402042014000004197A
+:1001F0000204201C0000FFFF020420200000FFFF7B
+:10020000020420240000FFFF020420280000FFFF5A
+:1002100006042038000000020204204000000034E0
+:100220000204204400000035060420480000007C41
+:100230000204223807FFFFFF0204223C0000003FB7
+:100240000204224007FFFFFF020422440000000FC7
+:1002500001042248000000000104224C00000000BC
+:10026000010422500000000001042254000000009C
+:1002700001042258000000000104225C000000007C
+:10028000010422600000000001042264000000005C
+:1002900001042268000000000104226C000000003C
+:1002A000010422700000000001042274000000001C
+:1002B00001042278000000000104227C00000000FC
+:1002C000020424BC000000010C042000000003E82C
+:1002D0000A042000000000010B0420000000000AB6
+:1002E0000205004400000020020500480000003222
+:1002F000020500900215002002050094021500205E
+:1003000002050098000000300205009C0810000063
+:10031000020500A000000033020500A40000003028
+:10032000020500A800000031020500AC0000000238
+:10033000020500B000000005020500B40000000640
+:10034000020500B800000002020500BC0000000227
+:10035000020500C000000000020500C40000000506
+:10036000020500C800000002020500CC00000002E7
+:10037000020500D000000002020500D400000001C8
+:1003800002050114000000010205011C000000012B
+:100390000205012000000002020502040000000125
+:1003A0000205020C0000004002050210000000409F
+:1003B0000205021C000000200205022000000013BC
+:1003C0000205022400000020060502400000000A89
+:1003D0000405028000200000020500500000000714
+:1003E0000205005400000007020500580000000844
+:1003F0000205005C00000008060500600000000423
+:10040000020500D800000006020500E00000000D13
+:10041000020500E40000002D020500E800000007CE
+:10042000020500EC00000027020500F000000007B4
+:10043000020500F400000027020500F80000000794
+:10044000020500FC00000027020500040000000176
+:1004500002050008000000010205000C0000000178
+:100460000205001000000001020500140000000158
+:1004700002050018000000010205001C0000000138
+:100480000205002000000001020500240000000118
+:1004900002050028000000010205002C00000001F8
+:1004A00002050030000000010205003400000001D8
+:1004B00002050038000000010205003C00000001B8
+:1004C00002050040000000010406100002000020A8
+:1004D000020600DC00000001010600D80000000058
+:1004E0000406020000030220020600DC00000000F7
+:1004F00002060068000000B802060078000001143F
+:10050000010600B800000000010600C8000000005D
+:100510000206006C000000B80206007C0000011416
+:10052000010600BC00000000010600CC0000000035
+:100530000718040000960000081807600014022342
+:10054000071C000034C50000071C800034DB0D329E
+:10055000071D00000A1D1A69081D14405D78022558
+:100560000118000000000000011800040000000055
+:1005700001180008000000000118000C0000000035
+:100580000118001000000000011800140000000015
+:1005900002180020000000010218002400000002E0
+:1005A00002180028000000030218002C00000000C0
+:1005B000021800300000000402180034000000019E
+:1005C00002180038000000000218003C0000000182
+:1005D000021800400000000402180044000000005F
+:1005E00002180048000000010218004C000000033F
+:1005F0000218005000000000021800540000000122
+:1006000002180058000000040218005C00000000FE
+:1006100002180060000000010218006400000003DE
+:1006200002180068000000000218006C00000001C1
+:10063000021800700000000402180074000000009E
+:1006400002180078000000040218007C000000037B
+:100650000618008000000002021800A400003FFFFE
+:10066000021800A8000003FF021802240000000086
+:1006700002180234000000000218024C00000000C2
+:10068000021802E4000000FF061810000000040039
+:10069000021B8BC000000001021B80000000003420
+:1006A000021B804000000018021B80800000000C2C
+:1006B000021B80C0000000200C1B83000007A1204B
+:1006C0000A1B8300000001380B1B83000000138805
+:1006D000021B83C0000001F4061A2000000000B2D3
+:1006E000061A23C800000181041A29CC0001022740
+:1006F000061A1020000000C8061A100000000002B0
+:10070000061A1E3800000002061A1E300000000201
+:10071000061A080000000002061A0808000000027D
+:10072000061A081000000004041A1FB00005022871
+:10073000041A4CB00008022D061A22C8000000203E
+:10074000061A400000000124021A4920000000009F
+:10075000061A14000000000A061A145000000006D1
+:10076000061A150000000002041A150800050235DB
+:10077000061A151C00000009061A15800000001456
+:10078000061A09C000000048061A0800000000020E
+:10079000061A08200000000E041A1FB00002023AD8
+:1007A000061A2C2800000002061A23480000002028
+:1007B000061A449000000124021A49240000000097
+:1007C000061A14280000000A061A14680000000621
+:1007D000061A154000000002041A15480005023CE4
+:1007E000061A155C00000009061A15D00000001456
+:1007F000061A0AE000000048061A08080000000275
+:10080000061A08580000000E041A1FB80002024120
+:10081000061A2C30000000020200A2800000000135
+:100820000200A294071D29110200A29800000000F6
+:100830000200A29C009C04240200A2A00000000070
+:100840000200A2A4000002090200A4FCFF000000B4
+:10085000020100B400000001020100B80000000124
+:10086000020100DC000000010201010000000001A3
+:1008700002010104000000010201007C00300000C0
+:1008800002010084000000280201008C000000002A
+:1008900002010130000000040201025C00000001BE
+:1008A000020103280000000002010554000000308E
+:1008B000020100C400000001020100CC00000001A0
+:1008C000020100F800000001020100F00000000138
+:1008D00002010080003000000201008800000028B2
+:1008E0000201009000000000020101340000000439
+:1008F000020102DC000000010201032C00000000E4
+:100900000201056400000030020100C8000000017F
+:10091000020100D000000001020100FC0000000103
+:10092000020100F400000001020C10000000002091
+:10093000020C200800000A11020C200C00000A0022
+:10094000020C201000000A04020C201C0000FFFF13
+:10095000020C20200000FFFF020C20240000FFFFFB
+:10096000020C20280000FFFF060C203800000002C7
+:10097000020C204000000034020C2044000000352E
+:10098000020C204800000020020C204C0000002136
+:10099000020C205000000022020C20540000002312
+:1009A000020C205800000024020C205C00000025EE
+:1009B000020C206000000026020C206400000027CA
+:1009C000020C206800000028020C206C00000029A6
+:1009D000020C20700000002A020C20740000002B82
+:1009E000060C207800000056020C21D00000000107
+:1009F000020C21D400000001020C21D800000001EB
+:100A0000020C21DC00000001020C21E000000001CA
+:100A1000020C21E400000001020C21E800000001AA
+:100A2000020C21EC00000001020C21F0000000018A
+:100A3000020C21F400000001060C21F80000001057
+:100A4000020C223807FFFFFF020C223C0000003F8F
+:100A5000020C224007FFFFFF020C22440000000F9F
+:100A6000010C224800000000010C224C0000000094
+:100A7000010C225000000000010C22540000000074
+:100A8000010C225800000000010C225C0000000054
+:100A9000010C226000000000010C22640000000034
+:100AA000010C226800000000010C226C0000000014
+:100AB000010C227000000000010C227400000000F4
+:100AC000010C227800000000010C227C00000000D4
+:100AD000020C24BC000000010C0C2000000003E804
+:100AE0000A0C2000000000010B0C20000000000A8E
+:100AF000020C400800000365020C400C0000035487
+:100B0000020C401000000358020C40140000037552
+:100B1000020C401C0000FFFF020C40200000FFFF01
+:100B2000020C40240000FFFF020C40280000FFFFE1
+:100B3000020C403800000046020C403C000000055A
+:100B4000060C40400000005E020C41B800000001AD
+:100B5000060C41BC0000001F020C423807FFFFFFDB
+:100B6000020C423C0000003F020C424007FFFFFF26
+:100B7000020C42440000000F010C4248000000003B
+:100B8000010C424C00000000010C4250000000002B
+:100B9000010C425400000000010C4258000000000B
+:100BA000010C425C00000000010C426000000000EB
+:100BB000010C426400000000010C426800000000CB
+:100BC000010C426C00000000010C427000000000AB
+:100BD000010C427400000000010C4278000000008B
+:100BE000010C427C00000000010C4280000000006B
+:100BF000020C44C0000000010C0C4000000003E89F
+:100C00000A0C4000000000010B0C40000000000A2C
+:100C1000020D004400000032020D008C021500207D
+:100C2000020D009002150020020D00940810000033
+:100C3000020D009800000033020D009C000000022D
+:100C4000020D00A000000000020D00A4000000053D
+:100C5000020D00A800000005060D00AC0000000217
+:100C6000020D00B400000002020D00B800000003F5
+:100C7000020D00BC00000002020D00C000000001D7
+:100C8000020D00C800000002020D00CC00000002AE
+:100C9000020D010800000001020D015C00000001CE
+:100CA000020D016400000001020D01680000000255
+:100CB000020D020400000001020D020C00000020E1
+:100CC000020D021000000040020D0214000000405E
+:100CD000020D022000000003020D02240000001893
+:100CE000060D028000000012040D030000240243E0
+:100CF000020D004C00000001020D00500000000237
+:100D0000020D005400000008020D00580000000809
+:100D1000060D005C00000004020D00C40000000489
+:100D2000020D011400000009020D01180000002945
+:100D3000020D011C0000000A020D01200000002A23
+:100D4000020D012400000007020D01280000002709
+:100D5000020D012C00000007020D013000000027E9
+:100D6000020D01340000000C020D01380000002CBF
+:100D7000020D013C0000000C020D01400000002C9F
+:100D8000020D01440000000C020D01480000002C7F
+:100D9000020D000400000001020D00080000000127
+:100DA000020D000C00000001020D00100000000107
+:100DB000020D001400000001020D001800000001E7
+:100DC000020D001C00000001020D002000000001C7
+:100DD000020D002400000001020D002800000001A7
+:100DE000020D002C00000001020D00300000000187
+:100DF000020D003400000001020D00380000000167
+:100E0000020D003C00000001020E004C0000003208
+:100E1000020E009402150020020E00980215002018
+:100E2000020E009C00000030020E00A0081000001E
+:100E3000020E00A400000033020E00A800000030E3
+:100E4000020E00AC00000031020E00B000000002F3
+:100E5000020E00B400000004020E00B80000000002
+:100E6000020E00BC00000002020E00C000000002E2
+:100E7000020E00C400000000020E00C800000002C4
+:100E8000020E00CC00000007020E00D0000000029D
+:100E9000020E00D400000002020E00D80000000183
+:100EA000020E00E400000001020E014400000001F7
+:100EB000020E014C00000001020E01500000000271
+:100EC000020E020400000001020E020C00000040AD
+:100ED000020E021000000040020E021C000000047E
+:100EE000020E022000000020020E02240000000E6C
+:100EF000020E02280000001B060E03000000001274
+:100F0000040E0280001B0267020E00540000000C59
+:100F1000020E005800000009020E005C0000000FE5
+:100F2000020E006000000010060E006400000004C5
+:100F3000020E00DC00000003020E01100000000F92
+:100F4000020E01140000002F020E01180000000E16
+:100F5000020E011C0000002E020E00040000000121
+:100F6000020E000800000001020E000C000000014B
+:100F7000020E001000000001020E0014000000012B
+:100F8000020E001800000001020E001C000000010B
+:100F9000020E002000000001020E002400000001EB
+:100FA000020E002800000001020E002C00000001CB
+:100FB000020E003000000001020E003400000001AB
+:100FC000020E003800000001020E003C000000018B
+:100FD000020E004000000001020E0044000000016B
+:100FE0000730040000CA00000830076800130282BE
+:100FF00007340000336100000734800037270CD924
+:10100000073500002F111AA30835708051F00284B3
+:10101000013000000000000001300004000000006A
+:1010200001300008000000000130000C000000004A
+:10103000013000100000000001300014000000002A
+:1010400002300020000000010230002400000002F5
+:1010500002300028000000030230002C00000000D5
+:1010600002300030000000040230003400000001B3
+:1010700002300038000000000230003C0000000197
+:101080000230004000000004023000440000000074
+:1010900002300048000000010230004C0000000354
+:1010A0000230005000000000023000540000000137
+:1010B00002300058000000040230005C0000000014
+:1010C00002300060000000010230006400000003F4
+:1010D00002300068000000000230006C00000001D7
+:1010E00002300070000000040230007400000000B4
+:1010F00002300078000000040230007C0000000391
+:101100000630008000000002023000A400003FFF13
+:10111000023000A8000003FF02300224000000009B
+:1011200002300234000000000230024C00000000D7
+:10113000023002E40000FFFF06302000000008003B
+:1011400002338BC000000001023380000000001A4F
+:10115000023380400000004E023380800000001007
+:10116000023380C0000000200C3383000007A12060
+:101170000A338300000001380B338300000013881A
+:10118000023383C0000001F40C3383801DCD650061
+:101190000A3383800004C4B40B338380004C4B407B
+:1011A00006321AA0000000C206321020000000C85B
+:1011B0000632100000000002063214000000004059
+:1011C00006325098000000040632508000000005EE
+:1011D00004325094000102860632500000000020C4
+:1011E00004322830000202870233080001000000A8
+:1011F00004330C00001002890233080000000000D4
+:1012000004330C400010029906321500000000B4AF
+:1012100002321DC80000000006324000000000D865
+:10122000063217D0000000B402321DCC00000000CE
+:1012300006324360000000D807200400009200003E
+:1012400008200780001002A9072400002CD100000C
+:10125000072480002AE50B350824DC6062DA02AB43
+:101260000120000000000000012000040000000038
+:1012700001200008000000000120000C0000000018
+:1012800001200010000000000120001400000000F8
+:1012900002200020000000010220002400000002C3
+:1012A00002200028000000030220002C00000000A3
+:1012B0000220003000000004022000340000000181
+:1012C00002200038000000000220003C0000000165
+:1012D0000220004000000004022000440000000042
+:1012E00002200048000000010220004C0000000322
+:1012F0000220005000000000022000540000000105
+:1013000002200058000000040220005C00000000E1
+:1013100002200060000000010220006400000003C1
+:1013200002200068000000000220006C00000001A4
+:101330000220007000000004022000740000000081
+:1013400002200078000000040220007C000000035E
+:101350000620008000000002022000A400003FFFE1
+:10136000022000A8000003FF022002240000000069
+:1013700002200234000000000220024C00000000A5
+:10138000022002E40000FFFF062020000000080009
+:1013900002238BC000000001022380000000001027
+:1013A00002238040000000120223808000000030F1
+:1013B000022380C00000000E022383C0000001F45D
+:1013C000062250000000004206221020000000C843
+:1013D000062210000000000206222000000000C0CB
+:1013E000062225C00000024004222EC8000802ADDB
+:1013F00002230800013FFFFF04230C00001002B588
+:10140000022308000000000004230C40001002C565
+:1014100006223040000000A00622354000000010E7
+:10142000062236C000000030062240000000020004
+:10143000062235C00000002006223840000000309F
+:1014400006223000000000080222511800000000AF
+:10145000062223000000000E0622241000000030A7
+:10146000062232C0000000A00622358000000010D5
+:1014700006223780000000300622480000000200EB
+:10148000062236400000002006223900000000300D
+:1014900006223020000000080222511C000000003B
+:1014A000062223380000000E062224D0000000305F
+:1014B00002161000000000280217000800000002B9
+:1014C0000217002C000000030217003C000000047B
+:1014D0000217004400000008021700480000000244
+:1014E0000217004C0000009002170050000000900E
+:1014F00002170054008000900217005808140000E2
+:10150000021700600000008A0217006400000080DB
+:1015100002170068000000810217006C00000080C4
+:10152000021700700000000602170078000007D0C4
+:101530000217007C0000076C02170038007C1004C2
+:10154000021700040000000F0616402400000002ED
+:10155000021640700000001C021642080000000144
+:101560000216421000000001021642200000000195
+:10157000021642280000000102164230000000015D
+:10158000021642380000000102164260000000010D
+:101590000C16401C0003D0900A16401C0000009C52
+:1015A0000B16401C000009C4021640300000000861
+:1015B000021640340000000C0216403800000010F3
+:1015C0000216404400000020021640000000000106
+:1015D000021640D800000001021640080000000179
+:1015E0000216400C0000000102164010000000012D
+:1015F00002164240000000000216424800000000AF
+:101600000616427000000002021642500000000060
+:101610000216425800000000061642800000000238
+:1016200002166008000006140216600C0000060096
+:1016300002166010000006040216601C0000FFFF86
+:10164000021660200000FFFF021660240000FFFF6A
+:10165000021660280000FFFF02166038000000201C
+:101660000216603C000000200216604000000034BA
+:101670000216604400000035021660480000002396
+:101680000216604C00000024021660500000002585
+:101690000216605400000026021660580000002761
+:1016A0000216605C00000029021660600000002A3B
+:1016B000021660640000002B021660680000002C17
+:1016C0000216606C0000002D0616607000000052CB
+:1016D000021661B800000001061661BC0000001F80
+:1016E0000216623807FFFFFF0216623C0000003F4F
+:1016F0000216624007FFFFFF021662440000000F5F
+:1017000001166248000000000116624C0000000053
+:101710000116625000000000011662540000000033
+:1017200001166258000000000116625C0000000013
+:1017300001166260000000000116626400000000F3
+:1017400001166268000000000116626C00000000D3
+:1017500001166270000000000116627400000000B3
+:1017600001166278000000000116627C0000000093
+:10177000021664BC000000010C166000000003E8C3
+:101780000A166000000000010B1660000000000A4D
+:10179000021680400000000602168044000000058A
+:1017A000021680480000000A0216804C0000000566
+:1017B0000216805400000002021680CC00000004D3
+:1017C000021680D000000004021680D4000000043D
+:1017D000021680D800000004021680DC000000041D
+:1017E000021680E000000004021680E400000004FD
+:1017F000021680E8000000040216880400000004BD
+:10180000021680300000007C021680340000003D8B
+:10181000021680380000003F0216803C0000009C49
+:10182000021680F000000007061680F40000000594
+:101830000216880C01010101021681080000000057
+:101840000216810C00000004021681100000000442
+:1018500002168114000000020216881008012004FC
+:1018600002168118000000050216811C0000000508
+:1018700002168120000000050216812400000005E8
+:101880000216882C2008100102168128000000088A
+:101890000216812C000000060216813000000007AD
+:1018A0000216813400000000021688300101012078
+:1018B0000616813800000004021688340101010177
+:1018C0000616814800000004021688380101010153
+:1018D00006168158000000040216883C010101012F
+:1018E00006168168000000030216817400000001E2
+:1018F00002168840010101010216817800000001F2
+:101900000216817C000000010216818000000001A7
+:1019100002168184000000010216884401010101C1
+:1019200002168188000000010216818C000000046C
+:10193000021681900000000402168194000000024B
+:10194000021688480801200402168198000000054C
+:101950000216819C00000005021681A0000000050F
+:10196000021681A400000005021688142008100148
+:10197000021681A800000008021681AC00000006D3
+:10198000021681B000000007021681B400000001B9
+:101990000216881801010120021681B8000000011A
+:1019A000021681BC00000001021681C00000000187
+:1019B000021681C4000000010216881C0101010109
+:1019C000021681C800000001021681CC000000014F
+:1019D000021681D000000001021681D4000000012F
+:1019E0000216882001010101021681D800000001C1
+:1019F000021681DC00000001021681E000000001F7
+:101A0000021681E400000001021688240101010190
+:101A1000021681E800000001021681EC00000001BE
+:101A2000021681F000000001021688280101010160
+:101A300002168240FFFF003F0616824400000002AB
+:101A40000216824CFFFF003F021682500000010088
+:101A5000021682540000010006168258000000029F
+:101A600002168260000000C002168264000000C0FE
+:101A70000216826800001E000216826C00001E0022
+:101A800002168270000040000216827400004000BE
+:101A900002168278000080000216827C000080001E
+:101AA00002168280000020000216828400002000BE
+:101AB0000616828800000007021682A400000001BA
+:101AC000061682A80000000A021681F400000C0825
+:101AD000021681F800000040021681FC000001009F
+:101AE0000216820000000020021682040000001787
+:101AF00002168208000000800216820C000002001C
+:101B0000021682100000000002168218FFFF01FF7B
+:101B100002168214FFFF01FF0216823C0000001330
+:101B2000021680900000013F021680600000014014
+:101B30000216806400000140061680680000000262
+:101B400002168070000000C00616807400000007B6
+:101B50000216809C00000048021680A00000004889
+:101B6000061680A400000002021680AC00000048A7
+:101B7000061680B0000000070216823800008000C0
+:101B800002168234000025E40216809400007FFFD4
+:101B900002168220000000070216821C00000007C7
+:101BA000021682280000000002168224FFFFFFFFB9
+:101BB00002168230000000000216822CFFFFFFFF99
+:101BC000021680EC000000FF02140000000000017B
+:101BD0000214000C0000000102140040000000018B
+:101BE0000214004400007FFF0214000C00000000FB
+:101BF00002140000000000000214006C000000004D
+:101C00000214000400000001021400300000000172
+:101C100002140004000000000214005C0000000038
+:101C2000021400080000000102140034000000014A
+:101C30000214000800000000021400600000000010
+:101C40000202005800000032020200A0031500202A
+:101C5000020200A403150020020200A801000030C7
+:101C6000020200AC08100000020200B000000033C5
+:101C7000020200B400000030020200B8000000318F
+:101C8000020200BC00000003020200C000000006C7
+:101C9000020200C400000003020200C800000003AA
+:101CA000020200CC00000002020200D0000000008E
+:101CB000020200D400000002020200DC000000006A
+:101CC000020200E000000006020200E4000000043E
+:101CD000020200E800000002020200EC0000000224
+:101CE000020200F000000001020200FC00000006F9
+:101CF0000202012000000000020201340000000284
+:101D0000020201B0000000010202020C000000010A
+:101D10000202021400000001020202180000000288
+:101D200002020404000000010202040C0000004052
+:101D300002020410000000400202041C0000000423
+:101D4000020204200000002002020424000000021D
+:101D5000020204280000001F060205000000001215
+:101D600004020480001F02D5020200600000000F80
+:101D70000202006400000007020200680000000B7D
+:101D80000202006C0000000E060200700000000459
+:101D9000020200F40000000402020004000000013E
+:101DA00002020008000000010202000C0000000115
+:101DB00002020010000000010202001400000001F5
+:101DC00002020018000000010202001C00000001D5
+:101DD00002020020000000010202002400000001B5
+:101DE00002020028000000010202002C0000000195
+:101DF0000202003000000001020200340000000175
+:101E000002020038000000010202003C0000000154
+:101E10000202004000000001020200440000000134
+:101E200002020048000000010202004C0000000114
+:101E3000020200500000000102020108000000C878
+:101E40000202011800000002020201C400000000AA
+:101E5000020201CC00000000020201D400000002D6
+:101E6000020201DC00000002020201E4000000FFA7
+:101E7000020201EC000000FF0202010C000000C899
+:101E80000202011C00000002020201C80000000062
+:101E9000020201D000000000020201D8000000028E
+:101EA000020201E000000002020201E8000000FF5F
+:101EB000020201F0000000FF0728040000B5000046
+:101EC00008280768001302F4072C000035D300002F
+:101ED000072C80003A3E0D75072D00003B541C0571
+:101EE000072D800022BC2ADB082DC770471202F69E
+:101EF000012800000000000001280004000000008C
+:101F000001280008000000000128000C000000006B
+:101F1000012800100000000001280014000000004B
+:101F20000228002000000001022800240000000216
+:101F300002280028000000030228002C00000000F6
+:101F400002280030000000040228003400000001D4
+:101F500002280038000000000228003C00000001B8
+:101F60000228004000000004022800440000000095
+:101F700002280048000000010228004C0000000375
+:101F80000228005000000000022800540000000158
+:101F900002280058000000040228005C0000000035
+:101FA0000228006000000001022800640000000315
+:101FB00002280068000000000228006C00000001F8
+:101FC00002280070000000040228007400000000D5
+:101FD00002280078000000040228007C00000003B2
+:101FE0000628008000000002022800A400003FFF35
+:101FF000022800A8000003FF0228022400000000BD
+:1020000002280234000000000228024C00000000F8
+:10201000022802E40000FFFF06282000000008005C
+:10202000022B8BC000000001022B8000000000008A
+:10203000022B804000000018022B80800000000C62
+:10204000022B80C0000000660C2B83000007A1203B
+:102050000A2B8300000001380B2B8300000013883B
+:10206000022B83C0000001F40C2B8340000001F41C
+:102070000A2B8340000000000B2B8340000000056A
+:102080000A2B83800004C4B40C2B83801DCD650013
+:102090000B2B8380004C4B40062A3C400000000480
+:1020A000042A3C50000202F8062A300000000048D2
+:1020B000062A1020000000C8062A100000000002B6
+:1020C000062A31280000008E022A33680000000032
+:1020D000042A3370000202FA042A3A70000402FC57
+:1020E000042A3D0000020300042A15000002030236
+:1020F000062A150800000100022A197000000000DD
+:10210000022A197800000000042A19600002030462
+:10211000062A4AC000000002062A4B000000000404
+:10212000042A1F4800020306022B080000000000DA
+:10213000042B0C0000100308022B08000100000013
+:10214000042B0C4000080318022B080002000000BA
+:10215000042B0C6000080320062A3A8000000014BB
+:10216000062A3B2000000024062A14000000000A72
+:10217000062A145000000006062A3378000000D812
+:10218000022A3A3800000000042A3C5800020328C2
+:10219000042A3C680010032A062A5020000000028E
+:1021A000062A503000000002062A500000000002FB
+:1021B000062A501000000002022A504000000000D1
+:1021C000062A50480000000E022A50B80000000104
+:1021D000042A4AC80002033A062A4B1000000042B3
+:1021E000062A4D2000000004062A3AD00000001400
+:1021F000062A3BB000000024062A14280000000A2A
+:10220000062A146800000006062A36D8000000D806
+:10221000022A3A3C00000000042A3C600002033C11
+:10222000042A3CA80010033E062A502800000002A1
+:10223000062A503800000002062A5008000000025A
+:10224000062A501800000002022A50440000000034
+:10225000062A50800000000E022A50BC0000000137
+:10226000042A4AD00002034E062A4C1800000042FD
+:10227000062A4D3000000004021010080000000182
+:102280000210101000000264021010000003D000C1
+:10229000021010040000003D091018000200035055
+:1022A00009101100002005500610118000000002E6
+:1022B0000910118800060570061011A00000001812
+:1022C000021010100000000006102400000000E0C2
+:1022D0000210201C0000000002102020000000015D
+:1022E000021020C0000000010210200400000001C4
+:1022F000021020080000000109103C0000050576CE
+:1023000009103C200005057B0910380000050580F8
+:1023100002104028000000100210404400003FFF5F
+:102320000210405800280000021040840084924AA5
+:1023300002104058000000000610806800000004F1
+:1023400002108000000010800610802800000002AB
+:102350000210803800000010021080400000FFFFD3
+:10236000021080440000FFFF0210805000000000B7
+:102370000210810000000000061081200000000211
+:1023800002108008000002B502108010000000005A
+:10239000061082000000004A021081080001FFFFC1
+:1023A00006108140000000020210800000001A8028
+:1023B0000610900000000024061091200000004A42
+:1023C000061093700000004A061095C00000004AF5
+:1023D000021080040000108006108030000000020F
+:1023E0000210803C00000010021080480000FFFF37
+:1023F0000210804C0000FFFF02108054000000001B
+:102400000210810400000000061081280000000274
+:102410000210800C000002B50210801400000000C1
+:10242000061084000000004A0210810C0001FFFF2A
+:1024300006108148000000020210800400001A808B
+:102440000610909000000024061092480000004AF8
+:10245000061094980000004A061096E80000004A12
+:102460000212049000E383400212051400003C10A5
+:10247000021205200000000202120494FFFFFFFF79
+:1024800002120498FFFFFFFF0212049CFFFFFFFFF0
+:10249000021204A0FFFFFFFF021204A4FFFFFFFFD0
+:1024A000021204A8FFFFFFFF021204ACFFFFFFFFB0
+:1024B000021204B0FFFFFFFF021204B8FFFFFFFF8C
+:1024C000021204BCFFFFFFFF021204C0FFFFFFFF68
+:1024D000021204C4FFFFFFFF021204C8FFFFFFFF48
+:1024E000021204CCFFFFFFFF021204D0FFFFFFFF28
+:1024F000021204DCFFFFFFFF021204E0FFFFFFFFF8
+:10250000021204E4FFFFFFFF021204E8FFFFFFFFD7
+:10251000021204ECFFFFFFFF021204F0FFFFFFFFB7
+:10252000021204F4FFFFFFFF021204F8FFFFFFFF97
+:10253000021204FCFFFFFFFF02120500FFFFFFFF76
+:1025400002120504FFFFFFFF02120508FFFFFFFF55
+:102550000212050CFFFFFFFF02120510FFFFFFFF35
+:10256000021204D4FFFF3330021204D8FFFF3340BD
+:10257000021204B4F00030000212039000000008C0
+:102580000212039C00000008061203A000000002D3
+:10259000021203BC00000004021203C40000000485
+:1025A000021203D000000000021203DC0000000051
+:1025B0000212036C00000001021203680000003FD9
+:1025C000021201BC00000040021201C00000180805
+:1025D000021201C400000803021201C8000008032F
+:1025E000021201CC00000040021201D000000003E2
+:1025F000021201D400000803021201D800000803EF
+:10260000021201DC00000803021201E000010003D5
+:10261000021201E400000803021201E800000803AE
+:10262000021201EC00000003021201F0000000039E
+:10263000021201F400000003021201F8000000037E
+:10264000021201FC0000000302120200000000035D
+:10265000021202040000000302120208000000033C
+:102660000212020C0000000302120210000000031C
+:1026700002120214000000030212021800000003FC
+:102680000212021C000000030212022000000003DC
+:102690000212022400000003021202280000240398
+:1026A0000212022C0000002F02120230000000096A
+:1026B00002120234000000190212023800000184E4
+:1026C0000212023C000001830212024000000306D5
+:1026D0000212024400000019021202480000000623
+:1026E0000212024C00000306021202500000030610
+:1026F00002120254000003060212025800000C8667
+:102700000212025C000003060212026000000306CF
+:1027100002120264000000060212026800000006B5
+:102720000212026C00000006021202700000000695
+:102730000212027400000006021202780000000675
+:102740000212027C00000006021202800000000655
+:102750000212028400000006021202880000000635
+:102760000212028C00000006021202900000000615
+:1027700002120294000000060212029800000006F5
+:102780000212029C00000006021202A000000306D2
+:10279000021202A400000013021202A800000006A8
+:1027A000021202B000001004021202B40000100471
+:1027B0000212032400106440021203280010644037
+:1027C000021201B0000000010600A0000000001687
+:1027D0000200A06CBF5C00000200A070FFF51FEFBC
+:1027E0000200A0740000FFFF0200A078500003E088
+:1027F0000200A07C000000000200A0800000A000F9
+:102800000600A084000000050200A0980FE0000070
+:102810000600A09C000000140200A0EC555400002B
+:102820000200A0F0555555550200A0F40000555582
+:102830000200A0F8000000000200A0FC55540000B7
+:102840000200A100555555550200A1040000555540
+:102850000200A108000000000200A22C00000000FD
+:102860000600A230000000030200A0600000000784
+:102870000200A10CBF5C00000200A110FFF51FEFD9
+:102880000200A1140000FFFF0200A118500003E0A5
+:102890000200A11C000000000200A1200000A00016
+:1028A0000600A124000000050200A1380FE000008E
+:1028B0000600A13C000000140200A18C5554000049
+:1028C0000200A190555555550200A19400005555A0
+:1028D0000200A198000000000200A19C55540000D5
+:1028E0000200A1A0555555550200A1A40000555560
+:1028F0000200A1A8000000000200A23C00000000AD
+:102900000600A240000000030200A06400000007CF
+:1029100000000000000000000000002E0000000089
+:1029200000000000000000000000000000000000A7
+:102930000000000000000000000000000000000097
+:102940000000000000000000000000000000000087
+:102950000000000000000000000000000000000077
+:102960000000000000000000000000000000000067
+:10297000002E0050000000000000000000000000D9
+:102980000000000000000000000000000000000047
+:102990000000000000000000000000000050008D5A
+:1029A0000000000000000000000000000000000027
+:1029B0000000000000000000000000000000000017
+:1029C0000000000000000000008D009200920096C0
+:1029D0000096009A000000000000000000000000C7
+:1029E00000000000000000000000000000000000E7
+:1029F00000000000009A00DB00DB00E900E900F7BE
+:102A000000000000000000000000000000000000C6
+:102A100000000000000000000000000000000000B6
+:102A200000000000000000000000000000000000A6
+:102A30000000000000000000000000000000000096
+:102A40000000000000000000000000000000000086
+:102A50000000000000000000000000000000000076
+:102A60000000000000000000000000000000000066
+:102A70000000000000000000000000000000000056
+:102A80000000000000000000000000000000000046
+:102A90000000000000000000000000000000000036
+:102AA0000000000000000000000000000000000026
+:102AB0000000000000000000000000000000000016
+:102AC0000000000000000000000000000000000006
+:102AD00000F700FE00000000000000000000000001
+:102AE00000000000000000000000000000000000E6
+:102AF00000000000000000000000000000000000D6
+:102B000000000000000000000000000000000000C5
+:102B100000000000000000000000000000000000B5
+:102B2000000000000000000000FE01030103010E90
+:102B3000010E01190000000000000000000000006C
+:102B40000000000000000000000000000000000085
+:102B50000000000000000000000000000000000075
+:102B60000000000000000000000000000000000065
+:102B70000000000000000000000000000000000055
+:102B80000119011A00000000000000000000000010
+:102B90000000000000000000000000000000000035
+:102BA000000000000000000000000000011A0152B7
+:102BB0000000000000000000000000000000000015
+:102BC0000000000000000000000000000000000005
+:102BD000000000000000000001520176000000002B
+:102BE00000000000000000000000000000000000E5
+:102BF00000000000000000000000000000000000D5
+:102C000000000000017601B5000000000000000097
+:102C100000000000000000000000000000000000B4
+:102C200000000000000000000000000000000000A4
+:102C300001B501F0000000000000000000000000ED
+:102C40000000000000000000000000000000000084
+:102C500000000000000000000000000001F002354C
+:102C6000023502380238023B00000000000000007C
+:102C70000000000000000000000000000000000054
+:102C80000000000000000000023B02760276028095
+:102C90000280028A00000000000000000000000026
+:102CA0000000000000000000000000000000000024
+:102CB00000000000028A028B0000000000000000FB
+:102CC0000000000000000000000000000000000004
+:102CD00000000000000000000000000000000000F4
+:102CE000028B029D000000000000000000000000B8
+:102CF00000000000000000000000000000000000D4
+:102D0000000000000000000000000000029D02B270
+:102D100002B202B502B502B80000000000000000D7
+:102D200000000000000000000000000000000000A3
+:102D3000000000000000000002B802E600000000F1
+:102D40000000000000000000000000000000000083
+:102D50000000000000000000000000000000000073
+:102D60000000000002E6036D00000000000000000B
+:102D70000000000000000000000000000000000053
+:102D80000000000000000000000000000000000043
+:102D9000036D0374037403780378037C0000000060
+:102DA0000000000000000000000000000000000023
+:102DB000000000000000000000000000037C03BBD6
+:102DC00003BB03C303C303CB0000000000000000EB
+:102DD00000000000000000000000000000000000F3
+:102DE000000000000000000003CB041F041F04319A
+:102DF0000431044300000000000000000000000057
+:102E000000000000000000000000000000000000C2
+:102E1000000000000443044D00000000000000001A
+:102E200000000000000000000000000000000000A2
+:102E30000000000000000000000000000000000092
+:102E4000044D0453000000000000000000000000DA
+:102E50000000000000000000000000000000000072
+:102E600000000000000000000000000004530456B1
+:102E70000000000000000000000000000000000052
+:102E80000000000000000000000000000000000042
+:102E900000000000000000000456045B0000000079
+:102EA0000000000000000000000000000000000022
+:102EB0000000000000000000000000000000000012
+:102EC00000000000045B045C045C046E046E04807B
+:102ED00000000000000000000000000000000000F2
+:102EE00000000000000000000000000000000000E2
+:102EF000048004ED0000000000000000000000005D
+:102F000000000000000000000000000000000000C1
+:102F100000000000000000000000000004ED04EECE
+:102F200004EE050205020516000000000000000086
+:102F30000000000000000000000000000000000091
+:102F40000000000000000000000000000000000081
+:102F50000000000000000000000000000000000071
+:102F60000000000000000000000000000000000061
+:102F70000000000000000000000000000000000051
+:102F80000000000000000000000000000000000041
+:102F90000000000000000000000000000000000031
+:102FA000000000000000000000010000000204C05A
+:102FB0000003098000040E4000051300000617C03E
+:102FC00000071C800008214000092600000A2AC0D2
+:102FD000000B2F80000C3440000D3900000E3DC066
+:102FE000000F42800010474000114C00001250C0FA
+:102FF0000013558000145A4000155F00001663C08E
+:103000000017688000186D4000197200001A76C021
+:10301000001B7B80001C8040001D8500001E89C0B5
+:10302000001F8E8000209340000020000000400020
+:1030300000006000000080000000A0000000C00050
+:103040000000E0000001000000012000000140003D
+:1030500000016000000180000001A0000001C0002C
+:103060000001E00000020000000220000002400019
+:1030700000026000000280000002A0000002C00008
+:103080000002E000000300000003200000034000F5
+:1030900000036000000380000003A0000003C000E4
+:1030A0000003E000000400000004200000044000D1
+:1030B00000046000000480000004A0000004C000C0
+:1030C0000004E000000500000005200000054000AD
+:1030D00000056000000580000005A0000005C0009C
+:1030E0000005E00000060000000620000006400089
+:1030F00000066000000680000006A0000006C00078
+:103100000006E00000070000000720000007400064
+:1031100000076000000780000007A0000007C00053
+:103120000007E00000080000000820000008400040
+:1031300000086000000880000008A0000008C0002F
+:103140000008E0000009000000092000000940001C
+:1031500000096000000980000009A0000009C0000B
+:103160000009E000000A0000000A2000000A4000F8
+:10317000000A6000000A8000000AA000000AC000E7
+:10318000000AE000000B0000000B2000000B4000D4
+:10319000000B6000000B8000000BA000000BC000C3
+:1031A000000BE000000C0000000C2000000C4000B0
+:1031B000000C6000000C8000000CA000000CC0009F
+:1031C000000CE000000D0000000D2000000D40008C
+:1031D000000D6000000D8000000DA000000DC0007B
+:1031E000000DE000000E0000000E2000000E400068
+:1031F000000E6000000E8000000EA000000EC00057
+:10320000000EE000000F0000000F2000000F400043
+:10321000000F6000000F8000000FA000000FC00032
+:10322000000FE0000010000000102000001040001F
+:1032300000106000001080000010A0000010C0000E
+:103240000010E000001100000011200000114000FB
+:1032500000116000001180000011A0000011C000EA
+:103260000011E000001200000012200000124000D7
+:1032700000126000001280000012A0000012C000C6
+:103280000012E000001300000013200000134000B3
+:1032900000136000001380000013A0000013C000A2
+:1032A0000013E0000014000000142000001440008F
+:1032B00000146000001480000014A0000014C0007E
+:1032C0000014E0000015000000152000001540006B
+:1032D00000156000001580000015A0000015C0005A
+:1032E0000015E00000160000001620000016400047
+:1032F00000166000001680000016A0000016C00036
+:103300000016E00000170000001720000017400022
+:1033100000176000001780000017A0000017C00011
+:103320000017E000001800000018200000184000FE
+:1033300000186000001880000018A0000018C000ED
+:103340000018E000001900000019200000194000DA
+:1033500000196000001980000019A0000019C000C9
+:103360000019E000001A0000001A2000001A4000B6
+:10337000001A6000001A8000001AA000001AC000A5
+:10338000001AE000001B0000001B2000001B400092
+:10339000001B6000001B8000001BA000001BC00081
+:1033A000001BE000001C0000001C2000001C40006E
+:1033B000001C6000001C8000001CA000001CC0005D
+:1033C000001CE000001D0000001D2000001D40004A
+:1033D000001D6000001D8000001DA000001DC00039
+:1033E000001DE000001E0000001E2000001E400026
+:1033F000001E6000001E8000001EA000001EC00015
+:10340000001EE000001F0000001F2000001F400001
+:10341000001F6000001F8000001FA000001FC000F0
+:10342000001FE000002000000020200000204000DD
+:1034300000206000002080000020A0000020C000CC
+:103440000020E000002100000021200000214000B9
+:1034500000216000002180000021A0000021C000A8
+:103460000021E00000220000002220000022400095
+:1034700000226000002280000022A0000022C00084
+:103480000022E00000230000002320000023400071
+:1034900000236000002380000023A0000023C00060
+:1034A0000023E0000024000000242000002440004D
+:1034B00000246000002480000024A0000024C0003C
+:1034C0000024E00000250000002520000025400029
+:1034D00000256000002580000025A0000025C00018
+:1034E0000025E00000260000002620000026400005
+:1034F00000266000002680000026A0000026C000F4
+:103500000026E000002700000027200000274000E0
+:1035100000276000002780000027A0000027C000CF
+:103520000027E000002800000028200000284000BC
+:1035300000286000002880000028A0000028C000AB
+:103540000028E00000290000002920000029400098
+:1035500000296000002980000029A0000029C00087
+:103560000029E000002A0000002A2000002A400074
+:10357000002A6000002A8000002AA000002AC00063
+:10358000002AE000002B0000002B2000002B400050
+:10359000002B6000002B8000002BA000002BC0003F
+:1035A000002BE000002C0000002C2000002C40002C
+:1035B000002C6000002C8000002CA000002CC0001B
+:1035C000002CE000002D0000002D2000002D400008
+:1035D000002D6000002D8000002DA000002DC000F7
+:1035E000002DE000002E0000002E2000002E4000E4
+:1035F000002E6000002E8000002EA000002EC000D3
+:10360000002EE000002F0000002F2000002F4000BF
+:10361000002F6000002F8000002FA000002FC000AE
+:10362000002FE0000030000000302000003040009B
+:1036300000306000003080000030A0000030C0008A
+:103640000030E00000310000003120000031400077
+:1036500000316000003180000031A0000031C00066
+:103660000031E00000320000003220000032400053
+:1036700000326000003280000032A0000032C00042
+:103680000032E0000033000000332000003340002F
+:1036900000336000003380000033A0000033C0001E
+:1036A0000033E0000034000000342000003440000B
+:1036B00000346000003480000034A0000034C000FA
+:1036C0000034E000003500000035200000354000E7
+:1036D00000356000003580000035A0000035C000D6
+:1036E0000035E000003600000036200000364000C3
+:1036F00000366000003680000036A0000036C000B2
+:103700000036E0000037000000372000003740009E
+:1037100000376000003780000037A0000037C0008D
+:103720000037E0000038000000382000003840007A
+:1037300000386000003880000038A0000038C00069
+:103740000038E00000390000003920000039400056
+:1037500000396000003980000039A0000039C00045
+:103760000039E000003A0000003A2000003A400032
+:10377000003A6000003A8000003AA000003AC00021
+:10378000003AE000003B0000003B2000003B40000E
+:10379000003B6000003B8000003BA000003BC000FD
+:1037A000003BE000003C0000003C2000003C4000EA
+:1037B000003C6000003C8000003CA000003CC000D9
+:1037C000003CE000003D0000003D2000003D4000C6
+:1037D000003D6000003D8000003DA000003DC000B5
+:1037E000003DE000003E0000003E2000003E4000A2
+:1037F000003E6000003E8000003EA000003EC00091
+:10380000003EE000003F0000003F2000003F40007D
+:10381000003F6000003F8000003FA000003FC0006C
+:10382000003FE000003FE00100000000000001FF59
+:103830000000020000007FF800007FF80000026F27
+:1038400000001500000000010000000300BEBC20C5
+:103850000000000300BEBC2000000001FFFFFFFFCE
+:10386000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF68
+:10387000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF58
+:1038800000000000FFFFFFFF00000000FFFFFFFF40
+:103890000000000300BEBC20FFFFFFFF000000008F
+:1038A000FFFFFFFF00000000FFFFFFFF000000031D
+:1038B00000BEBC2000002000000040C0000061806D
+:1038C000000082400000A3000000C3C00000E480AC
+:1038D0000001054000012600000146C0000167808C
+:1038E000000188400001A9000001C9C00001EA8070
+:1038F00000020B4000022C0000024CC000026D8050
+:1039000000028E400002AF000002CFC00002F08033
+:103910000003114000033200000352C00003738013
+:10392000000394400003B5000003D5C00003F680F7
+:103930000004174000043800000458C000047980D7
+:1039400000049A400000800000010380000187000D
+:1039500000020A8000028E0000031180000395001F
+:103960000004188000049C0000051F800005A300CF
+:10397000000626800006AA0000072D800007B1007F
+:10398000000834800008B80000093B800009BF002F
+:10399000000A4280000AC600000B4980000BCD00DF
+:1039A000000C5080000CD400000D5780000DDB008F
+:1039B00000007FF800007FF800000174000015008F
+:1039C0000000190000000000FFFFFFFF40000000A2
+:1039D00040000000400000004000000040000000E7
+:1039E00040000000400000004000000040000000D7
+:1039F00040000000400000004000000040000000C7
+:103A000040000000400000004000000040000000B6
+:103A100040000000400000004000000040000000A6
+:103A20004000000040000000400000004000000096
+:103A30004000000040000000400000004000000086
+:103A400040000000400000004000000000007FF83F
+:103A500000007FF80000050900003500FFFFFFFFB0
+:103A6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF66
+:103A7000FFFFFFFFFFFFFFFFFFFFFFFF4000000012
+:103A80004000000040000000400000004000000036
+:103A90004000000040000000400000004000000026
+:103AA0004000000040000000400000004000000016
+:103AB0004000000040000000400000004000000006
+:103AC00040000000400000004000000040000000F6
+:103AD00040000000400000004000000040000000E6
+:103AE00040000000400000004000000040000000D6
+:103AF00040000000400000004000000000001000F6
+:103B000000002080000031000000418000005200D1
+:103B100000006280000073000000838000009400B9
+:103B20000000A4800000B5000000C5800000D600A1
+:103B30000000E6800000F700000107800001180087
+:103B400000012880000139000001498000015A006D
+:103B500000016A8000017B0000018B8000019C0055
+:103B60000001AC800001BD000001CD800001DE003D
+:103B70000001EE800001FF0000007FF800007FF8E8
+:103B8000000004480000150010000000000028ADEF
+:103B9000000000000001000100070205CCCCCCC1F0
+:103BA000FFFFFFFFFFFFFFFF7058103C0000000009
+:103BB0000000000000000001CCCC0201CCCCCCCC39
+:103BC00000000000FFFFFFFF400000004000000079
+:103BD00040000000400000004000000040000000E5
+:103BE00040000000400000004000000040000000D5
+:103BF00040000000400000004000000040000000C5
+:103C000040000000400000004000000040000000B4
+:103C100040000000400000004000000040000000A4
+:103C20004000000040000000400000004000000094
+:103C30004000000040000000400000004000000084
+:103C40004000000040000000000E01B7011600D641
+:103C50000000FFFF000000000000FFFF0000000068
+:103C60000000FFFF000000000000FFFF0000000058
+:103C70000000FFFF000000000000FFFF0000000048
+:103C80000000FFFF000000000000FFFF0000000038
+:103C90000010000000000000007201BB012300F3CF
+:103CA0000000FFFF000000000000FFFF0000000018
+:103CB0000000FFFF000000000000FFFF0000000008
+:103CC0000000FFFF000000000000FFFF00000000F8
+:103CD0000000FFFF000000000000FFFF00000000E8
+:103CE0000010000000000000FFFFFFF3318FFFFF16
+:103CF0000C30C30CC30C30C3CF3CF300F3CF3CF308
+:103D00000000CF3CCDCDCDCDFFFFFFF130EFFFFF69
+:103D10000C30C30CC30C30C3CF3CF300F3CF3CF3E7
+:103D20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD3
+:103D30000C30C30CC30C30C3CF3CF300F3CF3CF3C7
+:103D40000002CF3CCDCDCDCDFFFFF4061CBFFFFF61
+:103D50000C30C305C30C30C3CF300014F3CF3CF399
+:103D60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA4
+:103D70000C30C30CC30C30C3CF3CF300F3CF3CF387
+:103D80000008CF3CCDCDCDCDFFFFFFFA302FFFFF98
+:103D90000C30C30CC30C30C3CF3CF300F3CF3CF367
+:103DA0000010CF3CCDCDCDCDFFFFFFF731EFFFFFB2
+:103DB0000C30C30CC30C30C3CF3CF300F3CF3CF347
+:103DC0000020CF3CCDCDCDCDFFFFFFF5302FFFFF45
+:103DD0000C30C30CC30C30C3CF3CF300F3CF3CF327
+:103DE0000040CF3CCDCDCDCDFFFFFFF3318FFFFFA6
+:103DF0000C30C30CC30C30C3CF3CF300F3CF3CF307
+:103E00000000CF3CCDCDCDCDFFFFFFF1310FFFFF47
+:103E10000C30C30CC30C30C3CF3CF300F3CF3CF3E6
+:103E20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD2
+:103E30000C30C30CC30C30C3CF3CF300F3CF3CF3C6
+:103E40000002CF3CCDCDCDCDFFFFF4061CBFFFFF60
+:103E50000C30C305C30C30C3CF300014F3CF3CF398
+:103E60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA3
+:103E70000C30C30CC30C30C3CF3CF300F3CF3CF386
+:103E80000008CF3CCDCDCDCDFFFFFFFA302FFFFF97
+:103E90000C30C30CC30C30C3CF3CF300F3CF3CF366
+:103EA0000010CF3CCDCDCDCDFFFFFFF730EFFFFFB2
+:103EB0000C30C30CC30C30C3CF3CF300F3CF3CF346
+:103EC0000020CF3CCDCDCDCDFFFFFFF5304FFFFF24
+:103ED0000C30C30CC30C30C3CF3CF300F3CF3CF326
+:103EE0000040CF3CCDCDCDCDFFFFFFF331EFFFFF45
+:103EF0000C30C30CC30C30C3CF3CF300F3CF3CF306
+:103F00000000CF3CCDCDCDCDFFFFFFF1310FFFFF46
+:103F10000C30C30CC30C30C3CF3CF300F3CF3CF3E5
+:103F20000001CF3CCDCDCDCDFFFFFFF6305FFFFFD1
+:103F30000C30C30CC30C30C3CF3CF300F3CF3CF3C5
+:103F40000002CF3CCDCDCDCDFFFFF4061CBFFFFF5F
+:103F50000C30C305C30C30C3CF300014F3CF3CF397
+:103F60000004CF3CCDCDCDCDFFFFFFF2304FFFFFA2
+:103F70000C30C30CC30C30C3CF3CF300F3CF3CF385
+:103F80000008CF3CCDCDCDCDFFFFFFFA302FFFFF96
+:103F90000C30C30CC30C30C3CF3CF300F3CF3CF365
+:103FA0000010CF3CCDCDCDCDFFFFFF97056FFFFFBC
+:103FB0000C30C30CC30C30C3CF3CC000F3CF3CF378
+:103FC0000020CF3CCDCDCDCDFFFFFFF5310FFFFF62
+:103FD0000C30C30CC30C30C3CF3CF300F3CF3CF325
+:103FE0000040CF3CCDCDCDCDFFFFFFF3320FFFFF23
+:103FF0000C30C30CC30C30C3CF3CF300F3CF3CF305
+:104000000000CF3CCDCDCDCDFFFFFFF1310FFFFF45
+:104010000C30C30CC30C30C3CF3CF300F3CF3CF3E4
+:104020000001CF3CCDCDCDCDFFFFFFF6305FFFFFD0
+:104030000C30C30CC30C30C3CF3CF300F3CF3CF3C4
+:104040000002CF3CCDCDCDCDFFFFF4061CBFFFFF5E
+:104050000C30C305C30C30C3CF300014F3CF3CF396
+:104060000004CF3CCDCDCDCDFFFFFFF2304FFFFFA1
+:104070000C30C30CC30C30C3CF3CF300F3CF3CF384
+:104080000008CF3CCDCDCDCDFFFFFF8A042FFFFF31
+:104090000C30C30CC30C30C3CF3CC000F3CF3CF397
+:1040A0000010CF3CCDCDCDCDFFFFFF9705CFFFFF5B
+:1040B0000C30C30CC30C30C3CF3CC000F3CF3CF377
+:1040C0000020CF3CCDCDCDCDFFFFFFF5310FFFFF61
+:1040D0000C30C30CC30C30C3CF3CF300F3CF3CF324
+:1040E0000040CF3CCDCDCDCDFFFFFFF3300FFFFF24
+:1040F0000C30C30CC30C30C3CF3CF300F3CF3CF304
+:104100000000CF3CCDCDCDCDFFFFFFF1300FFFFF45
+:104110000C30C30CC30C30C3CF3CF300F3CF3CF3E3
+:104120000001CF3CCDCDCDCDFFFFFFF6305FFFFFCF
+:104130000C30C30CC30C30C3CF3CF300F3CF3CF3C3
+:104140000002CF3CCDCDCDCDFFFFF4061CBFFFFF5D
+:104150000C30C305C30C30C3CF300014F3CF3CF395
+:104160000004CF3CCDCDCDCDFFFFFFF2304FFFFFA0
+:104170000C30C30CC30C30C3CF3CF300F3CF3CF383
+:104180000008CF3CCDCDCDCDFFFFFFFA302FFFFF94
+:104190000C30C30CC30C30C3CF3CF300F3CF3CF363
+:1041A0000010CF3CCDCDCDCDFFFFFF97040FFFFF1B
+:1041B0000C30C30CC30C30C3CF3CC000F3CF3CF376
+:1041C0000020CF3CCDCDCDCDFFFFFFF5300FFFFF61
+:1041D0000C30C30CC30C30C3CF3CF300F3CF3CF323
+:1041E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF57
+:1041F0000C30C30CC30C30C3CF3CF3CCF3CF3CF337
+:104200000000CF3CCDCDCDCDFFFFFFFF30CFFFFF76
+:104210000C30C30CC30C30C3CF3CF3CCF3CF3CF316
+:104220000001CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:104230000C30C30CC30C30C3CF3CF3CCF3CF3CF3F6
+:104240000002CF3CCDCDCDCDFFFFFFFF30CFFFFF34
+:104250000C30C30CC30C30C3CF3CF3CCF3CF3CF3D6
+:104260000004CF3CCDCDCDCDFFFFFFFF30CFFFFF12
+:104270000C30C30CC30C30C3CF3CF3CCF3CF3CF3B6
+:104280000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEE
+:104290000C30C30CC30C30C3CF3CF3CCF3CF3CF396
+:1042A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC6
+:1042B0000C30C30CC30C30C3CF3CF3CCF3CF3CF376
+:1042C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF96
+:1042D0000C30C30CC30C30C3CF3CF3CCF3CF3CF356
+:1042E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF56
+:1042F0000C30C30CC30C30C3CF3CF3CCF3CF3CF336
+:104300000000CF3CCDCDCDCDFFFFFFFF30CFFFFF75
+:104310000C30C30CC30C30C3CF3CF3CCF3CF3CF315
+:104320000001CF3CCDCDCDCDFFFFFFFF30CFFFFF54
+:104330000C30C30CC30C30C3CF3CF3CCF3CF3CF3F5
+:104340000002CF3CCDCDCDCDFFFFFFFF30CFFFFF33
+:104350000C30C30CC30C30C3CF3CF3CCF3CF3CF3D5
+:104360000004CF3CCDCDCDCDFFFFFFFF30CFFFFF11
+:104370000C30C30CC30C30C3CF3CF3CCF3CF3CF3B5
+:104380000008CF3CCDCDCDCDFFFFFFFF30CFFFFFED
+:104390000C30C30CC30C30C3CF3CF3CCF3CF3CF395
+:1043A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC5
+:1043B0000C30C30CC30C30C3CF3CF3CCF3CF3CF375
+:1043C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF95
+:1043D0000C30C30CC30C30C3CF3CF3CCF3CF3CF355
+:1043E0000040CF3CCDCDCDCDFFFFFFFF30CFFFFF55
+:1043F0000C30C30CC30C30C3CF3CF3CCF3CF3CF335
+:104400000000CF3CCDCDCDCDFFFFFFFF30CFFFFF74
+:104410000C30C30CC30C30C3CF3CF3CCF3CF3CF314
+:104420000001CF3CCDCDCDCDFFFFFFFF30CFFFFF53
+:104430000C30C30CC30C30C3CF3CF3CCF3CF3CF3F4
+:104440000002CF3CCDCDCDCDFFFFFFFF30CFFFFF32
+:104450000C30C30CC30C30C3CF3CF3CCF3CF3CF3D4
+:104460000004CF3CCDCDCDCDFFFFFFFF30CFFFFF10
+:104470000C30C30CC30C30C3CF3CF3CCF3CF3CF3B4
+:104480000008CF3CCDCDCDCDFFFFFFFF30CFFFFFEC
+:104490000C30C30CC30C30C3CF3CF3CCF3CF3CF394
+:1044A0000010CF3CCDCDCDCDFFFFFFFF30CFFFFFC4
+:1044B0000C30C30CC30C30C3CF3CF3CCF3CF3CF374
+:1044C0000020CF3CCDCDCDCDFFFFFFFF30CFFFFF94
+:1044D0000C30C30CC30C30C3CF3CF3CCF3CF3CF354
+:1044E0000040CF3CCDCDCDCD000C0000000700C07A
+:1044F00000028130000B81580002021000010230DE
+:10450000000F024000010330000C0000000800C052
+:1045100000028140000B816800020220000102407D
+:1045200000070250000202C0000F0000000800F067
+:1045300000028170000B819800020250000102709D
+:10454000000B828000080338001000000008010002
+:1045500000028180000B81A80002026000018280BD
+:10456000000E82980008038000028000000B802863
+:10457000000200E0000101000000811000000118AD
+:10458000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045900000002000CCCCCCCCCCCCCCCCCCCCCCCC6B
+:1045A000CCCCCCCC00002000CCCCCCCCCCCCCCCC5B
+:1045B000CCCCCCCCCCCCCCCC00002000000000007B
+:1045C0001F8B080000000000000BFB51CFC0F00360
+:1045D0008A7BD81818F67020F843015F646260B8CF
+:1045E0000CC45781588099812198918121849178B8
+:1045F000FD19A208F63B210606296106860841A09E
+:1046000079C208F1D3403576220C0C8C22107E2B17
+:1046100090E612A58EFB071AEF94C214DB26816088
+:10462000EFC2228F8C77A3C98B4AA2F2F710D03F3A
+:10463000D0F895222A5F5601429741C55FA3C9CBA6
+:1046400041E56F41FDF54611BBB9B7A1F2009CB43D
+:10465000B6A260030000000000000000000000009F
+:104660001F8B080000000000000BED7D0B7854D577
+:10467000B5F03E73CE9C9949662627214F1E6112E4
+:1046800020028638BC0228F73A212140A575A055A2
+:10469000D1A21D3040C85B8A5E5ADB2F130831025D
+:1046A000DAE08F8A16EDF0AAA8A80123450B7478EA
+:1046B0008A5E6F6FB06A69B5DE888A8A3C22AD4A2D
+:1046C000EF6D7FFFB5D6DE3B73CE6402D8AFF7FE49
+:1046D000F7BFDF1F3FBFC33E7B9FBDD75EAFBDD6D9
+:1046E000DA6BEFB1DB1C4CBF96B1AFF00F9EF53625
+:1046F000C65846ECF9A89D7D2FE866AC60BD6F8575
+:104700003B1DDEEFCEDB91EC632C67CF5A650ABC14
+:10471000CFD9D0A6CC2F8C7D1F7041E57878BF7B98
+:10472000AD5202EF735E6B53E6E1D361639DD09EA1
+:1047300069BE14864F16602C93B1211399F80BB8FB
+:10474000738A191B88FF842ECE1BC98C8D632C6F36
+:10475000A52D1256E07DA87226F332B619E0CA499B
+:1047600083EFD4BFECB763DB06ED44979331A7E644
+:10477000D4BECA672C770EB331780E5EC6DFE3DF96
+:1047800057F07F5ED85A1EC24CE53C2C7BD24FC2FC
+:1047900090CCC33C5FA989E0EDD683A362F394CFAC
+:1047A0000D8DBE4CB7D6FBBD7C2EB9E363FD1EF864
+:1047B000FA716C3794B1485CFBDAB0AEB1ABE0098A
+:1047C00008682FECFDFD4C56528C74B88D4DA167D6
+:1047D000BDE6BB09F1527FD4CEC200777DC3C9725A
+:1047E0002CB3DD0A1B96D7FBFB51CC4EF428618A13
+:1047F0007612E7EB655E9C9F5AE37BB81CF0DC9079
+:104800001C28C37E1F490ED153BECF9E3F3D3B04A3
+:10481000F0942E2A0C33A0FBF9F58ADF019F7FA4C8
+:1048200044743BD0A3FA3B0D45D3A0DD9B7AE83A14
+:10483000FC6E911A6DB1C3F8B5731B0A8002AC53BC
+:10484000E7FC337877C9271AD06D3063E19434A43C
+:104850000B63274C74C0BF13C34559ED1B8F977A68
+:1048600056603F1AF612A1F9CAF779E1A34386C64A
+:104870008DC78A091E867032D6A524A2EBE0174B9D
+:104880008E6A457D8FF79F3F8F309743C01DD2B70B
+:10489000D6A34796037E4B5FB047AF057AD46E54DC
+:1048A000220E28DBF6B902489FB35BA00C74897A0C
+:1048B000746A7FC67052B9DED179FF3550EE7E4101
+:1048C000659BB0DBE1493694BB930276360ECA8015
+:1048D0008F852E5EACDDB8FF36ECAF72B783B99032
+:1048E0009E2F2EFAD635505E04FC864D6AB736E907
+:1048F000FDA1BC38A2B463F9DC1446FC114ED323ED
+:104900005B61BC73DECECC1B405E4E353A990F40E6
+:1049100059E1E9CCFC0EF051556447397E57B55D3D
+:10492000F123DA4B5FD87A2407E7F524F015F0512C
+:10493000F5B664E693F883FF4FC254AE85FA25308E
+:104940004F94FF45ACAD9CA938FE5ADDE789E1EBF9
+:1049500054A341E3F4C8D393300E7C57F7ACE2C7BD
+:1049600029D6D95808E5EAEC8BAE399BDD38BF264D
+:10497000BDC083F3BA47C7768B22F376A1CAAA8A51
+:104980006CD4CBA1BE6AC3467D6121E20DF45E21E9
+:10499000C2D5CF0AD77A3580F85D92EADCA4027ED0
+:1049A000983B903D3B01FF9C6A043556102B57A164
+:1049B0007C933E89E8B34CEDCB9554E2D7EA6D2A5F
+:1049C000F359F889D33F7C8CD33FBCD713D99A17BE
+:1049D000A3DF1283EB4949BF25A9829E5A77712232
+:1049E00078EE477A003C6D882F78AE11F07927B3C6
+:1049F000120DE8E20D30436197E6CF363B9BC7606E
+:104A0000ECD7D982803609CA3ABB83F91933B4DAB4
+:104A1000401994FFC282AFE17C18F3FB8280E71655
+:104A200085CDC1791F4660613E2D393AE1AF6D6A8F
+:104A3000F166551130A76379E1CF57E5D1F76FD013
+:104A4000F71A7C3FAAEFEF8DF28996EF8DF24AF9C3
+:104A5000FD3BD88E392FFE7D5BF9D5D6F1CBABE48B
+:104A6000F71FD0F8EE8BC36F4C9B6C1D7F5A0D7DEA
+:104A70005FEFE0F4EA4E75463641B9D9E50F684874
+:104A8000378D45F1BD9656B009DBA9921F58674096
+:104A900085EFDDDB53C7AC6266BE98F2271CCF03FF
+:104AA000D262E68B948949167E4C0DA459CAD093E4
+:104AB00071F2CA981E0A789D048FDE5F277D51D25D
+:104AC000DF49F0DEB5CF45E5BBAEE6F0DED5DF4D24
+:104AD000728630B01C28EBA1AB0CD37A04702A2C60
+:104AE0009BB1CF95904B196F7EEFB3E1FB249535C9
+:104AF000E07C921C8CF4D13D79C59BC326FCB40E9E
+:104B000002FA42395DD1391E055EEF19B4307B9E41
+:104B1000699C9641FA9C4D85FCFDED6E1C2F98A971
+:104B2000A01ED4BB0B0C77EF711CF9132DE3387367
+:104B30002B699CBCB8711CB99571E338E76C12EF16
+:104B4000C538432E36CE3DF9575BE7935B45E314FA
+:104B5000C5CF27B72A6E9C243E1F782FC6F123FEAF
+:104B6000FA9CCF90C9D6F90CAEA171AEC171C69BAB
+:104B7000E633B8266E1C378D83EF711C30A47C2C75
+:104B80000BE8EEE85E48F4FF958BEC05DD117A0248
+:104B9000FB656FBB18E9131F8C9B857A0516679020
+:104BA0005F4D49A371BE4802FABBCD74E6FA889EF8
+:104BB000A07F16081059042002FD532778B462FB29
+:104BC000ACDC267CEE2ECD9E8776C93A8F7F188886
+:104BD000CED9DDA5FAED09EC9B056DF6935D16FEC9
+:104BE000157A6F0A1BDE00E377A0B231954F82FE83
+:104BF00062A0B74E80FEC2E747C23EFD00F41BD361
+:104C0000CDF036D13C4E6A1C8F2737F075E48BB55A
+:104C1000C7EC60ECE1306F1402DC378A692C680362
+:104C2000E3CF2467F5821EDD2F3A229B881E810187
+:104C300036E073B6BE1FE04AB4033BF30FC21E85D5
+:104C4000BF0136B0656F69DD71189BBDA5CC1BB483
+:104C500004E63BA763AD7D0094CFDABB6EF3BB4D9A
+:104C6000FDCCB19FC0793BE13FECE7E690DD629F70
+:104C70007EB7D25ABE35CE5EAD51F2053DC4B8BE48
+:104C8000881DE975632687E7567C8EC16A83E875BF
+:104C90009BC1BF95F0D4DF6D67515A8FBA3258214E
+:104CA000E22383ECA2905C57E2E0BBCDEE0C0481E2
+:104CB0009EB7FD40253CC6C3DBB52F3960037BA9F9
+:104CC0006BFD1FED687F5F0AFEEF2DB3D6B3301F7B
+:104CD0004FE255F2C14D734AFA7D606A77736846B8
+:104CE000BF0F4CFCF2DDCA5996F2AD0D375BDA7F8F
+:104CF0006FD93C4BFDBCF0624BFDEDAD7758CA0B54
+:104D0000DA7E6069BF687D93A57E71E45E4B7DF5B8
+:104D1000B6B596726DFB2396F6F5BB375AEA6DFB76
+:104D2000465C8FF2B8E24D95A17DF6B9FBE4FD68D3
+:104D30005F7D6E687E6C5387BC0672F8716336F1D6
+:104D4000F7A9461F3DCFEE1EEB447BBC3E09E4199C
+:104D5000D6FA7DCA1FC2AD93518F407BD0E1079434
+:104D6000F7C361709E5E517CC4F7EA7A9D45815518
+:104D70001596D6C3D7DD6AAC5EEB82FAB17DD7ABB0
+:104D8000EBB584F55A9796B0DF734A7701DA77E18D
+:104D9000DF3918DA817DD90FF03700D78BBEEA4FA3
+:104DA000DB5865BB49EF9C546CC407372A534EA2AD
+:104DB0007EAED1B9BCD7ECCC9982FE608D1E2D6839
+:104DC000705F64BC7600260BFBC9A7792D8E0C881A
+:104DD000C92FD16F8845EE97B2D087A89F4FEF5764
+:104DE00049CFB2E8C1DC6F8FC2F10327F13DDB9DF3
+:104DF00041EBE35B8D817E1F803F77BC713A3D7F45
+:104E0000DF18ECF701E89A771AE750F9DDC6103D94
+:104E1000BB1A2BE979A2B181EA3F685C46E5938D24
+:104E2000617A7EDCD84ACF538D6D547FBA713D953F
+:104E3000CF3646E8D9E307087B94A50BFB4FD8EBA8
+:104E4000B07250F9BC98830AFFE67EAB3F1BE5FACF
+:104E5000BCFB8B02B473CF1F07C324817F289FF153
+:104E6000FCD637FD02B4DE2F8C00FDC7F6AE7725E9
+:104E700071FAB86C6C3A03FD73EF309D69307ED2E5
+:104E8000AFAE247B19DE6B8CF465C43FCB93A07F5F
+:104E90009C73D6A5E9D4C31F8FFE4731C61F6E147D
+:104EA000FA30E9A0DAC0E9B6D98F7433E18FDB6557
+:104EB0002F087D1E8747B2E5727AE3F34C86C467FC
+:104EC000672EC601D629C11136E083F31D0E9AD78D
+:104ED000F93DC91186DF627064D2C5F0C6E1A8DE73
+:104EE000E632CCFAA1B63DD5B0EA8B1CC3AC2FCECE
+:104EF0001FDDEC45B95F926D333E188BFC1110FC41
+:104F0000C1F94EF65FDB9E67B82DFD58CBE7DB9409
+:104F1000E9E80781724FF94E02FF403E9764EBC605
+:104F20000720DFA7B60D49C171C18F33709CD38DA7
+:104F300086C1C7CD36CC7C59B32C89DA4BF8FAEA56
+:104F4000F7EF0D1F5A06EF3B19A1FEAB215FDFCF34
+:104F500066DA9F289EC3F6D8BFC075C701FF7F459C
+:104F6000F1008DCAB2DFFA7635ECB80ADF6FB78C84
+:104F700007DFF9A40F8DEB55DF74D7D849535CA038
+:104F80000EC720FFC849740E418F29D0DF39CDDD0F
+:104F9000AAC038D36D3EAAAF17FC58EBECD243F051
+:104FA000EA4C07A7475FE39C6A3CEAD3407F543A48
+:104FB000C12383712ADB4794A17E3CD3B122330401
+:104FC0007C5BAD9EBF2B98E0FB569BC2E189D8BBB2
+:104FD000BB4CF3917114C6A05F670C7EE4F493A6FA
+:104FE00072BCBE96CF07B05FE08FBAEDC7CAAF0103
+:104FF000F8EB767FA6231CD36DA1076C19B1F92BB2
+:10500000387FE8A76ADB7B3ACEEF637BB8E0EE8BB4
+:10501000E8A9DE70BAB3296E27E10BB34EB463E69C
+:10502000F7C4157D37BD0DA2F9C93FDBD92A8083AE
+:10503000FD055A41BD5DD456B0A017F135BFA39A06
+:10504000E28B9FD8A4DDD4568CFC7186D9A6E3FCF4
+:10505000CEB0D7BD634DF8EBB071BB9FB5723B26A8
+:105060000CFF213C60CF5AEC9A45EBADE5856C76A0
+:1050700026EA8D85EBEC2C02285A8C7691E40F9869
+:10508000F7161BB77717B18616B4E73407F70FE6A4
+:105090001B4C1B0070D5FEE2B162B4FB7F69B311FB
+:1050A0007D649C61711A87BB2A3DA207A0FEFD8E1C
+:1050B000B1375E83DCE788B4E0BACC52987F2BEB43
+:1050C0008DCFDB5BADF05D0AFE7878195B6E8143B6
+:1050D000F62BE150B729814802BE7B45F29DD023D3
+:1050E00069AAD5CECF8A2BBF6313F14B95A948E7A8
+:1050F0003386336C4BA17A7F14E3233B1DFE1540AE
+:10510000DF3B6DC12ED4CF6017143153BB3B6D21F3
+:105110007A7F5A796D21DAA74C8B16A17F0F6B8AA3
+:1051200086FCA00B7E5093BC45188FF530583F414C
+:105130002E1D081FF4D3E2A99CC98A30FE0A720A08
+:10514000FDDDE72D3FAA40D9E5EE60D89F23DB1AAD
+:105150005F76F9ACE57AFC07D26138A3384EF2707D
+:105160006B3D2C580CF9CDE3B7BEFFF71E3C4589CB
+:105170006FBDC4D2F074BAA32A8CCF266AA7CD76AD
+:10518000739D93C34F7E39B45F2AECF93AE60B5313
+:105190009C389BF3C1D219368267A9C7E70F43BD7C
+:1051A000A20518CA1FC6AACDEB58FD0510B97EA6E8
+:1051B000B2D6AD235FD65FD05804F47D912DE45173
+:1051C000C723FE0264E73A01595F01C89A7BBAC55A
+:1051D000EE6503D3C4FA3AD030CBEB40A4F3F81811
+:1051E0009DA55EB00BBD08FA224BCD403DD85D4E6B
+:1051F0007E09EB223D21DBE9B17603118EBEDAB9DF
+:1052000062EDF212F557FB8B67768501FF55CF3DB6
+:10521000E805E2B34FB4B64C3FBCAFD9BAD28B7CF1
+:10522000FCB116F6E2BC3F89A8D313F1F38DAA2294
+:10523000FCB1805B417F58D0E9D453ABBF8578FF88
+:1052400062ABDDC026F5DB1C510710B1AE6331E760
+:10525000A76D8EF778F99ECF909EF5BBADF256F50F
+:10526000C4839918EF040C71BF9145C97EAEDBF27F
+:105270006139DA23F5AC9BF444FC7738FE85345A67
+:10528000BFE6E929BDEBE5FE4BBDE0FBFA8ED59FFD
+:10529000A95E2C5BE5BB52F823D3544F3AC5952643
+:1052A000B0094837890716E1F6F08A271F2E7A0FD2
+:1052B000E038BDE59FBD8A256EC4F5C3F9F6DB7FF6
+:1052C000F692AF6FBD7E56F8F3B1EF22F49D6F37C3
+:1052D000B7DFD91EFEACB147BDE82FD56CB4FB419A
+:1052E0003259CD339B7FFE28F2F5EF1C1467A87E60
+:1052F000E6F05B5743B97A873D7D269F865BC98C74
+:10530000D1A31EFE5F362686FFAAE70FEBBE51FC37
+:10531000FD8FD26274A8DEB15F67A37AE3ADB47D7E
+:10532000BFDEE54E408FF6F7CAD1DE5EF1E4973A74
+:10533000CAD527FB149695D7FBFBCA8D87C99E4318
+:105340003C11FD047D7AE8D58B4ED16FBD348EDAE9
+:1053500019B87EF545A791B8F665101F3FFB12C638
+:10536000EF7FEFF0E3FC2B9FFDBE17E7F191D6C076
+:10537000F9F9B195990118B7D21ECE34E8C9DF57B3
+:105380003E7E27F1D9A2637766523C8005726CB4E9
+:10539000868673707E0B36DC40F35BC842C46F9523
+:1053A0008FA9C108C6B334367D470279784DC8C38A
+:1053B000479B1CB8F6B08F50C1A27FF8BA4AFB04D5
+:1053C0008CDD41F1863BE53E045B42E5CF9D9C4E82
+:1053D0009B559B8C6F382D7CBAE59E4EA4CFA9417E
+:1053E000812C8C4F021EC2025F0AEA1DF5D8D42C14
+:1053F0004E1FE6D38AC577A0174BF13DB6EFB40731
+:105400005C4596EFC43AC6C75F2AC607B893D01E5C
+:10541000FB2813EC9B04F3FB52957A19EC0D137FD8
+:1054200099E49ACBF9967BB95C4B398FCC9A8EF57F
+:105430007F7A83CB0F7E87EB3AC015CDA2FAFDDFD2
+:1054400051480F385834913C6FB10B79B6D6CBFD2B
+:1054500049805BC3F529C627D07F1AE19FECB4854C
+:10546000EBE03B935EAEC7F1A89D1E7B6F5AD7174A
+:1054700009F97F5915FBA342FED9062EF77DDBBD46
+:1054800061EE1FD8233F7F14E515E413D7999A677F
+:10549000EC419CF7A7DB0FBE750BF0F5A7ED524E64
+:1054A000AD7A335E4E2B778E6789E4F453B79F2530
+:1054B0009453789F504EDD5DC4C7FFD97A53E2ED17
+:1054C0006C9CDE947AB02FFCC5EBC135AA2FA11ECF
+:1054D00084BF3758716FBE93FC26F9ACEAE9DAC194
+:1054E000143792FC28F9AD871F25BFC5CFD38AB7E3
+:1054F000F8FA1785BE9174B62F67610FC64BF7AAED
+:10550000E45F9F03985A80BEE7B6E74530EEBCD211
+:10551000C5E317E78C6E6F1A3C57A6F2727786DEEA
+:1055200082FA41BEEF76F1F8F6B960B737D5E457A5
+:10553000BCB747F5FAA0BE2BC2A627F23740F3123C
+:105540001C5DACAF7A1E0F9EAABA7397A1DFDEA6D0
+:10555000D27E7645D34D5EDC073EB767C84F503FDD
+:105560002D78050C4C80F71CDA812938BD808679AE
+:1055700009B70B7A7FCCC20F4D86F9DDBE87FB0BD6
+:10558000156BE2EC7BF7521DF50DD8F727AC716D6A
+:10559000CE3755A29FCA0DD6FA2AB686E85615C749
+:1055A0004721E1074ED0041F8D66A3851FC6E31770
+:1055B000425F4D550B7F8276C6B9A33CAE787E8F95
+:1055C0004AF83FBF5D8960DC87E2BB9390FEDD3A1D
+:1055D00033F9CBA791DFF4BEE5F8F40B7F28BE1BAF
+:1055E0009AD4EC7ABBE8A7F03CBDEB7705BFC4F2D8
+:1055F0002F7E9BFB36EBDDBE74DF9F69FFF8DC3E40
+:1056000007C1716EDFCBB97763F925871FE13CB71E
+:10561000DC41FB67E17D9EC830AC1F04F4C67573A6
+:10562000EF97455DB4EE34139DE66B7CBFE3FC9EC3
+:10563000FF7857C1FC833D0E1FCEA37E1FCF0BA961
+:105640007FC9457197737BBF2C0EB9FF7EF3A9D339
+:105650005988F8CFC3E6EC447E4DE5FB00F5BF9CCE
+:10566000B4B909F7C33BF6EBB8BF52FAABBF16A10A
+:105670007E39B793DB0967ED5D8FE33E68AD367425
+:10568000B91DE51E6DB6FE6077DA174C091726C204
+:105690000BC7C339C003CE0BF052897AB12F7C34CB
+:1056A0006BDCDFFCEF878FCF6EC3F16BF64C20B95C
+:1056B00089E14509F0F79E8853A1F9F3F7FBBE2C69
+:1056C00042BBE7D3F6265AC72F35EFCDFFE3E6AD51
+:1056D000442F67DE07FE9BF3FF748DAF4BF172D052
+:1056E0009BCF7F7117959FF5F809DECB94FF13FFD1
+:1056F000D3E8BE13E8EEBD34DD15FB7FD7795F8AB2
+:10570000EEAF08BA7B0CCC2B38B7F7AF142F97F35A
+:10571000BFD4BC7DFF8FCE5BDA3FAB6CFEB67C683E
+:10572000BF86453B7D00E7CAE1B3DB30CC046E4267
+:1057300030913D12B473FF4855781C860DE27121FB
+:1057400026FC094A01F3611C6521D9759ABB85ECD9
+:105750004CA6F93B03808F5523E7FB2957838D39EE
+:105760001EC2F2C0C97E8A6FC6F955CD0A0B2860E9
+:10577000EF6923BF7114ED7CFB705BD45144CFF70C
+:10578000F0798F8863D90DDDE24FB8E3FC0197CF44
+:105790005AEF10FD39D998B67CCC53706B4604C6CD
+:1057A0007797B4D17CDCC3186B33ED033A98E97B6F
+:1057B000E8AF1003B026FBF1EBE2AFA9077F633A35
+:1057C0000388BF11368A6B51521FE1C31F59457EB2
+:1057D00026F71F63F86CE9443C6A0CFC3F3E3FF23D
+:1057E0001B99F01735D18536DC167059DB09BFE8F7
+:1057F00092F4E1F4C8AD11F45962A187C47F02BAF2
+:1058000058E821F1FB75E9124F8F78BC7FC7CEE3D2
+:105810006DF174B2E47764703F240A7EC8CBDB3745
+:1058200053BCE3CC53EF7D0BDB57FF52654EE8E7EB
+:10583000EC760F8BA2FC6A111DFDA9AA0E35619CA6
+:1058400057DAE5D5CF7968BCAA9D8EC84CF8BE6AF8
+:10585000D7FB4564372DEF3E3200E3024F299C7E93
+:10586000E1AE22DCB7ABD2B87F10DFDF063B8F0B97
+:105870009C7E31790EC61F946D3C5FB1AAFD26BB9C
+:10588000C3C46FFFCBCEF35EA11DC973F84985D6A3
+:105890009BDEF071BFE0F4930A876FB73D82798F8A
+:1058A00055DB36EA21F42BB77D4671ECD2E79EF149
+:1058B0007691BFA85AFDE76D2AD1139E44BF783F69
+:1058C000B6AEA396FC84BA76E127C6F951D5CFEDE2
+:1058D000DD1506D4543FFF8417E32FA73AB77AC9E2
+:1058E0003FDDC6FD4FCDAD25F64F2FE597B6DF9BCB
+:1058F000D02F3D85FF007F62BF3DCE9FDFD6EFF208
+:10590000F62F9FF9FC718C939EDEF9E9E30877CDC1
+:10591000FFFEE3E368DFB37D2E632BCCB7FEA93730
+:1059200029DE24BF7B5BC8E9D9412C9C03EDCEFE68
+:10593000CE41F92367F77E948BFEDCD91D7FCE44E0
+:10594000BF7EE9DEA95938EFA52F9466B104F22E87
+:105950009FC89791CB8813C6D3E160C741F243CE6D
+:105960001C7790DFD7135F68AFE5F11A9F882B6C27
+:105970004F1C8795FE705DC7FBE53C3E26FCE24B65
+:10598000C511DE003A5E7519F4DA2EE24471F43A7C
+:1059900083FF00BA7C1947AFCF59E86739B80FD9F0
+:1059A000D1AFCF3842F432F024E3BB47EC019B8EF9
+:1059B00072B033B9874E33914ECF7C9E8BF1F08F0E
+:1059C000EDDD64F774EF7518E8DF57EDFD2DC9C5FF
+:1059D000D9178E51FC948938EB59D6F3C7E3628A04
+:1059E00098DF160F8F3F087C637CC2E7A5F7220E75
+:1059F000C1F955C627FA8A4B4CD045DE93883BD770
+:105A00006E795B6771711E6522D2E93D4B7C5CCE7D
+:105A10003BBE3F03F130C11C5F4B1CF7917E738C82
+:105A20004E3CAE26E36767378AB81BBC1F3806FDBD
+:105A3000411EC7A88F28BF6509E450C6D7C6E871C4
+:105A40007218B9BCB8DAA5E0FD5BF1314CE7EB8325
+:105A5000C4CBE9BF24D6C3DFD4B95C4FB78566EAAF
+:105A6000A6FDECEF897D16892F09EF69918777FAFA
+:105A70002995E2412DED07499FC6CB735D1FE720B5
+:105A80006ED379BCB56EF7FE22D43BA70FBC487C21
+:105A900057B7FD3D3D0CFD1CD9F6BCCEED49CEE718
+:105AA000A8A723263D7DFAD9FD453CEEC7F36EE35A
+:105AB000FBAF16FDD7EFB1F65FBFFD334BFFD5E16E
+:105AC00076DAFFBAD438A7B4C04D38DF539D768656
+:105AD000FAEE54BB3A3D92C80ED4ED967DD0966353
+:105AE0003AAD57E35E4FA2FCDCA5C7A6BF9D82FB83
+:105AF00074206668FF763471BEEAF8716000D2A542
+:105B0000E3D82D2AAE1BBB108F263BB8F88D8652EA
+:105B10000FC86BF13BC171C856F17A60C2719B0529
+:105B20006E18270BF57133F483F9F4983F84FBA3C7
+:105B3000AAB77C3AC2A31A36C39570FDE4FDD9DD3D
+:105B4000418676B9DDB0E62B67CF1671B4A8356F04
+:105B50003D5B67C3711F9CD992FCB81FB064446061
+:105B6000F461CCAB5F904D71E29C6FF3EFCE18EE19
+:105B7000B0EDAAD8BE6DF205E81FF3606C91B57365
+:105B8000E1BB64AD5DC17D007832A4CB9DB6D0266B
+:105B90003D03DBE9CC07AAF1715DD128FF429C7B74
+:105BA00091FDC9767DED07CB7348AA807F88D80F19
+:105BB0001EC4BA14DC0FDEE0E1E79106BBD3E9BCFA
+:105BC000D16661B7F970DF15DB3558D7ED4B9E47CD
+:105BD0006AB596D34B4BEE18EC073F58BFAB540356
+:105BE0007D907E53C98E0106EE4BAF2BC5BCFBF4F6
+:105BF000274A46E740798EA3A88CEAFFB564742E45
+:105C000094BFDF3AA98CEAAB15CA0BDCAB77978659
+:105C1000DD31F9CC00E316F32D406E0FA0DC9E09B8
+:105C20009E6EC1DADA1BBED0F9791816C4F90F9A44
+:105C3000C8E73FD0FDCE0E9CEF605B5713F2DFCF7D
+:105C4000F67E998AED7CCCA0791AACD9C07D7978A2
+:105C500035F1AB8BE4FFC4E7C1487E7F2E39F41BDE
+:105C600084E3DEF9C31F2E479D5AE3273E8ADF27D0
+:105C700066463AD1A542D005E1749AF2902BF12400
+:105C800002E99B3203C751C235EA57577E7D784EF1
+:105C90004A7E11E7C04CE7A43E41381F490ED1337C
+:105CA000FE9CD4013DF829F253CEC20BB908BF3C8B
+:105CB000FF54BAC84D7181F37B58C491407EE473A0
+:105CC0005323CBD086F65DFFA623F4671C37FF571E
+:105CD000BE9D47A1BFAB2A743FA6AE5DB56C5C8686
+:105CE0003696F109A13D21E8968DB444F9BA8BF1BD
+:105CF00073390E25807EE3B9EF1BA47F0756CC24B1
+:105D0000FFE25C725E3BE64F9CBB9BE701C00AAFC3
+:105D1000A01C0CDA931245FF07F8F88B383EFEC240
+:105D2000BACE58C73DF7956F7717F56788FEC0D094
+:105D3000C944B9E17FE7546E679F6BF4111C60168C
+:105D4000EEC7F5F472C7CB7658CFE901DEFB3B4CCA
+:105D500078CF75F449BF3C07A71F3DE3E9B7D0D919
+:105D6000908B725C156C2F47D7F4A385771523535E
+:105D7000BFA987AEC0F635733A8FF09CA18602DCCE
+:105D800067EB4D5F7E1E2B73CFBC263BC62B903E30
+:105D9000BEDE74BC6A993F43EB67A1EB5884FFAA4F
+:105DA0003D9FD9107E49CF87459E7FFCF7FFE85085
+:105DB000C4B8354D768C93ECD6C99E8D6F371D0FC8
+:105DC000558D8F958B9CC5346E968DC73B7AB7E702
+:105DD000EB5FAC5F279DCBEA8B1F8B0CDE1FE0FFD8
+:105DE0001B66FC7FAB6FFCCFC276807F7A7E0DFC9A
+:105DF000DF84EDFBC2BFB4A3AB855EA8C67D14E013
+:105E0000A30F03B33387C2F8E5AA9BE460F156956C
+:105E1000E40FDACFCCC98CE991C5931AF6E37C176D
+:105E20003FA610BF568873A69F8ABCFEF87CA88543
+:105E300073C2B4BFD32B2F2A12E7D7C5E5BBD7C790
+:105E4000F87630CF53E3E7B6542117A58B0A53D029
+:105E50001EDA67F7FD2BD9D9AFA86C5302FC6F444B
+:105E60002633D1755083CD9227CB2A522DFD962D06
+:105E70002AA47DEF251EDF45FDAAC1CBACEB765EE3
+:105E8000D87ACE6848ABF59CD1B0B6FE96F657AC42
+:105E9000CFB7D48F888CB4D45FB96D8CA53CAAFDE4
+:105EA0006A4BFBAB764FB1944747BF61693FF6E859
+:105EB0006C4B797CE72D96F6138ECFB7D44FEAAAB8
+:105EC000B2D45FF3F1124BF91FBA7F68B5536C8CF3
+:105ED000F4234B52485F1E6A9C988BF9D86C9C52F5
+:105EE00086F82C15F98487EED06D86179F0536034A
+:105EF000F4D681053369DD3F744766C047CFE200C1
+:105F0000FA354C9D3C2E51BEE6546352AE392FAA51
+:105F1000D469B7E8B7A986B5BCCB21F6FD0673BE38
+:105F2000F9659C7CD91B2647C13264FD170FCDC291
+:105F3000F140CEF6093DB7EFB2F45C6643319641CD
+:105F4000CE0E25923326D6D912C14FF00CE8981FF9
+:105F500059E6A1F538802F7DF43EAC81BC4C71FA36
+:105F6000071EC679D9FCE9C88465738287787F6289
+:105F70005D66C36D5F675D96729E6D13F96B693CDC
+:105F80007FED91050529CC84DF3F386CC28E6EE32E
+:105F90004FE3A8AB276F35DFFCFEE324CD942FA79A
+:105FA0002C9A49F922D97DE8453D3B7FC616D0C7DA
+:105FB0007A8E8F9EF27DCB1C5BC23CB06EA147A552
+:105FC000BD3522666F75233DCE64BFFE10E629D530
+:105FD000CDED267B2BDBD676C7119CD7ABAA885F8D
+:105FE000FAF8F92A61272F98F1C01D47705FFA5F10
+:105FF00086917E92E36C689C3E43339D231FD88735
+:10600000DF74A593C3F378E3F0191594B76DF0F33B
+:10601000A2A2FFDC706D39DACD8345BEE943B6C478
+:10602000F92E6ED14F16921CE135DC24276716BE7F
+:10603000E3D5601E8FC2EAE5C47DDBAB3A8BB91DA8
+:1060400016F0E339D4DCE8AD0F61FBDC6C8DF25D5A
+:10605000E3C7CF9A1B6ACD83F935A7D9FC6E2A779F
+:106060002BD8DEF123C6FA41FBE6FFAD123CCD078B
+:106070002651FE87C3DDC0703F55CEEB60DAA384A6
+:106080001FB52399D64126F6C565BCF5F3EC8A4EBB
+:10609000B4373E5F67A7F13E87391AD0FFE71D2A64
+:1060A000EDBB1E494B8ADAA0ACB67A68FDCE45DB63
+:1060B00013DA2FECF0447C7931BC68EB27D37918E4
+:1060C000C7403EFFE63477C49D47F34EC7794B384F
+:1060D000E5BC07F5E1679608B873AEE839A7C1904B
+:1060E0008F5543A37E17A4F2739891C689825ED61A
+:1060F000F9B464CFBEFE663C3FF486CA3035C4D7DF
+:10610000D546F35F08F3C7786F3C7ECFF8F2BEB098
+:10611000A9046709C2A9AE2FA779503BF8AEF6676C
+:106120000A7B340FF930349DE8DADF46E7027BD989
+:10613000074E2E5F339C3C2F57CF2E98B1A51F3EA4
+:1061400087925C7CD3D9E7BA1F74727D44CFAF715C
+:10615000BF00ADFF521FA9019BB073B95EEAB19FAA
+:10616000F4D0779D19B1B29AF2A322ECB76FFB6C11
+:10617000C77E1DED333723FB59EACDBEEC33B4CBDC
+:1061800090DFA45DB6386E9E30BF1A31BF9A44F3DB
+:10619000EBA56F6F699076CD12E745ECCA0C3DB167
+:1061A0003E7A52D0A1DED019C59B688D02BDB3D80E
+:1061B00046E78D99167199CF976F704ABB6ECF7E67
+:1061C0001DF10CF3463C6783FF5C4E7AC79E302F6F
+:1061D000FC52FE48FEEAC29D47B13FB07311FAF38C
+:1061E0006DBE94B48BD817F665AFBACC787DC02954
+:1061F000F2B963787C50E0F1C184784C073CDA2C2A
+:10620000F6E1AE021FE1F1A7CE8BD88767BEFD6E27
+:1062100031AE476705BEEA7AFC5CAE9FFBC32285C0
+:10622000F1AA5ACC5F76F232EE07ADC0263998DF7C
+:106230001C7C02FBAFDF6D3D77F863278F9331370E
+:106240003F372BFBCB14FA1EFCEA7FFCD0477AFFCA
+:106250009F703E31FFBAAB18FDAB152F5C91827673
+:1062600059D9AE9B0D7C9E4F1F4AEBD9995D8E008C
+:10627000C279268DE7EB9DD935E108C61F3E6D3CFE
+:106280009A6FD6F7679E3D566C877ECEEC3C56AC37
+:10629000517E70C46217D67EF59B623C8725F3AAB7
+:1062A0007BF8C5C9D789752E1ED7C8C8D45B305FA7
+:1062B000FC42522AE1EBC14CDBFD89E235A83E6984
+:1062C000DFDEA3D33EE59211BE156E8CD7E41994A0
+:1062D00087BB4209E42CC07D96594E3FEE03A4E7EC
+:1062E000B3E1792988C21073033E1D87DAE8B869E3
+:1062F00052A7B11FCD2319C7D14AB9BEEDBE41A7E0
+:10630000BCB164CDF7F05C2867CFD168BD93711D37
+:1063100047323F972CE33A3DF0BC62A77568495E6F
+:10632000A8AD04BE5B32298DBEF3CE7A8BF8E59C16
+:10633000CF16B6E37CB46E8AEFFCA47178C650C069
+:10634000A391639B4136CD5F005BA6FC7FAFC6C2C5
+:106350002960DFAC06FE1F0AFCDFD1E8A4F62D6041
+:106360001F1A69744F42EC9E0F93DCEC6C34A8DD6D
+:10637000CF1BB3E9BB071A7DF4ECB12318FF8ECA1B
+:1063800009F4EB7FD6F3BE467E9F882CFF711CD8A4
+:106390006940EFF4094055C04BBA387F2EEB1F6DB2
+:1063A0007C6548D950810CC067FF1A63E3AA8BC093
+:1063B0009BEE88A4E211E32B5D2C5C3611F3FCBA52
+:1063C000EF2F4FC5F311F794958D003CE2FEF6D503
+:1063D000402AD703CD783E35A7C6D78471BF9CDD50
+:1063E0004A3BAE5F39BBD796E03E02B4A37383B29B
+:1063F000DF0C17D773C9071F51F247E1E602DF9799
+:10640000677B932389CE978E73713DE777F1FDC14A
+:10641000D5625FBD7B969BF462F24117F14BCE9E35
+:106420002B697FCFDDC7BE727C3FC907FF4C71600F
+:10643000B7D2B61FF729D9026E7F4A7EEAEB3B6CD2
+:10644000AF5F46FB737E8DE2C260F6D2FCCECC1A03
+:1064500048F8C6F6663D7E4E4F6C9705049E56DAA8
+:1064600013C7E935C6C719D7D94DFB99786F13E221
+:106470003BE78D3605FDF5330ACFC7E80FF8D8099D
+:10648000E59CC96D74AFD373CE50B90BBEFB93714D
+:10649000BC602580E32AFC7D2E7E27F1A116E94E03
+:1064A000D427397BDEE3E77C6C5D3AE6BF2DBAF793
+:1064B000798A3FAA7A308F9757AEC4F8648637B886
+:1064C00011F984859F2F3B047CF2A038B78C6F5064
+:1064D000EFAD768972B8BD39007CB2DACECB8BEEE7
+:1064E0007D8EF866B53DB818CF3D63B919FA5F9D4A
+:1064F000DA9E6D83B2BBE999E6A383B02CDB3FD370
+:106500001C9E0C76A84BEAE7600EE2BDA76C4079B2
+:1065100094A9ACF13273F2A79C5FEDC13F1F190043
+:10652000FC52B787DF73D383B7DD6B155C8F7EDEDC
+:1065300078D4D7AC093991FA03D6F92BB219F929D5
+:106540007A4489E42B78DF476BA6395FE5BBC98ABB
+:10655000885BC0F7E6F863DCB9363A2A83EB73331D
+:10656000CF0B89A7EB9B49256D4919781E35B44A95
+:10657000453DF88CDDA0BCFA2E8DF4F6699957DF05
+:1065800060277BB0469C73B52F0FAD1A817271AB3B
+:10659000E6C7F842755E5B09DA43D52FE6F99B58EA
+:1065A0002C4FB73AB53D738C3B96A72BCB2B445C55
+:1065B0002A2BB52135B510F763D6E6E27E491D6B6F
+:1065C000BBED8708EF6B2A437EFF64FFA414BC7702
+:1065D000A816CA1807ABED38A687A0DDD549FCBEC2
+:1065E0009BBA0EE01B37BF872650C0D846CD484225
+:1065F0003DFFF340C348348937BB7E5DE6FA07C6EA
+:106600009EC80F1848E75FDD7BBCD98965DD18C1DE
+:106610004663F9DF9A91CFAA47DB28CF9285FFED39
+:106620005060A8D8EF8572AB6BD05473DC3B479CAD
+:1066300033ACDFE0A6F360B02E6F42FEAE5B6F0BB3
+:10664000E3FE99CDD949E7807EE562823ED6F353D9
+:10665000EB14AE0FC30B783C75E98CB46FD0F9A97D
+:1066600095F946F82271DDCA0B49744E4A96AF4E31
+:10667000F251FF955A98F6912A2F78E97CD5DF6F71
+:106680003CA7E5BC56EFF1DC048F1CAF26361ED1CB
+:10669000F5E098571F1A0A745BBAC36E7398F86EC8
+:1066A000E90EB13FEF0A64613F193AC733437F10E7
+:1066B000788DEEB8E1E5B0960DFA5FCA77F87C7395
+:1066C000D964A45BAC9E59E53F80FEF87D49B2FCDD
+:1066D0001FCD650313B44F8A6B9F2FFB575762FF83
+:1066E000F1F06424C5CA4E68AFFDD5D15346F8D643
+:1066F000DAE2FA4B9365F74A1C5FF255EBBDE98786
+:10670000C3C057F7A5B695A0FEEF5EC07C788F1684
+:10671000F2ABDFA46F5B5D5CAE2B2FE45BE81DC3C7
+:106720007B81852E1F35665BF63D17CD5D4AFBB339
+:10673000AD2E412F16E6E76C360C6011533CE8FF96
+:10674000C3F1B7C271751F70FCE37F311C3ECB787B
+:106750003138865AE0FB5BE1D87463C137F2A0C9D7
+:10676000834AD8998FEBC28F795E9C9A5AE66BC2A6
+:106770007D991F6B14D71FC678BE4BBEC68E6A6349
+:10678000507EDA02180761CBB9BD02EF5BED63689A
+:106790001D227F61C81EC73CCCDBC8AF0C2CC627AE
+:1067A0001B5848FB3E729F948938A1DCE71966B0FC
+:1067B00012BCF7EF44D23C5AA7F28373AB31AEAEB2
+:1067C0007AC625E17AF8A02D12C6F1C20FF0F13297
+:1067D0006C917627DA4BDEA106AE77195EAEFFD854
+:1067E000AA425AFF36D9F247DE0170AC544A925E93
+:1067F000413CA7E6537C1CDFE33D3B9BC4BAA5A606
+:10680000FA0D5CA73689756B85D0EFF27D725A70F0
+:106810001EDA113F59356DAA7312EAA1406B3F5839
+:106820006FEE5F356D65F6245C6F7CF94E585FEE58
+:106830004F9AB6D20993D9D4E4EB6FA4C6CAC3FE6B
+:106840000AAB35E989692B03A0779ADD4BAAD0CE34
+:1068500081FAC3E8273E9126F50EAFCF977A0AF565
+:1068600012E831B5A9A71C46BD94DFA377A691DE37
+:10687000D9F2B84AE5A5301EDA31308F30DE0FD6B6
+:106880003D4C23FFC805B02441D935229FF6CF6087
+:10689000DE2C09FDFF11BC5EEE77E8C36CB4DF812E
+:1068A000ED118FAE1CDE5E9FC5CF4BEB1E37F96D31
+:1068B00072FF4415FB7749224F453166911FEC5C0E
+:1068C000336609FA51CEA1D6FD693D2E9F458DCF85
+:1068D0006F7147C9EE6A4B12F1EB7E2C9BEE4D10A7
+:1068E000EFC1521E83CFCC9B9B4BE83E3D0F333014
+:1068F0009F3A3B1465667B493E1DB08EFA4C72E3AD
+:1069000070B340A27C8A85C9DC1E765FD0B89FA890
+:10691000807D83EBA847D8E1C23EB2CB7B8EE2D626
+:106920005D692FD9C57D7A4B674CC9C27349AA3BB3
+:10693000E0443B67BF3186F66954E6BFBEC464EFEE
+:10694000344767507C5233020CED9C57859DA31A47
+:106950007E66B6735A1AC10187B56A737101DD5F2D
+:10696000F3A82BEA1C82F47DD0E647BD71704C552C
+:1069700058C1F8E4324672BAB938730AEE336CD4AF
+:106980008229B7A2BCBC01E3F938DDF83EF70A055D
+:10699000E3E99F3B8329A80FEE4B65163FEAFA64B3
+:1069A000EE8F6C4DE2FA47FA092D004F14E0D02E1D
+:1069B0008CA4FB7C460BBB549F5B46F1324C03C25C
+:1069C000F8A78335840D77ECBE3A47B6CD92FFA881
+:1069D0005D28A278E2D6243E8E1CF71E71DFA02C23
+:1069E0003B59038F1B038F27F2DF6A059C0EB0878C
+:1069F0007C649FC4EDFFF7B68FC85E91F4E9B15394
+:106A0000147E2EB42FFBA8FE82CDA26763E7D97552
+:106A1000D2CB67C57D01320FC42DF4594B76A8ED5A
+:106A20009ABCD8FD009AC8075923EE0560D95AB719
+:106A3000F91C7E32C663A0BE59E48524C79DEB775E
+:106A4000B99792BFE01AAE59CE81395988BE73F812
+:106A5000ACEFB5ECF8FB02C23D796094B7A8B14742
+:106A600014BA1C80DBBB03441ED699E47729DE08E8
+:106A7000F6EE4127ED4BF073A2321EF675EDE357AB
+:106A8000D1AE22BF70FA68EC7711AE4718CF66C15D
+:106A90001CBEE9D8CE286F28C9DFC5F89D63646F96
+:106AA000A952CF859F6F463F2AC36CDF99ECB52B67
+:106AB000573FDFDC5C487E079517DDDB467A70A523
+:106AC0004B96575319D6AB28FA3D6C97C387FC04F5
+:106AD000DF07506ED88D05642FABF9E0D202DC657C
+:106AE00078FF21EE0FEC726C427B16FCDAF92E5324
+:106AF0009CEC8CE7782E2B4CD85FD8D25FEED7EB8E
+:106B00000FC6EFC03C23595FE65D1F55F9773EFC89
+:106B10008E0DEC7C370CFD3FF88283EE2591F72C2F
+:106B2000C7F3EB9464EEBFA3DE30E773EA732B0286
+:106B3000C89C523E1DD949963C7029AFDA85E124A4
+:106B40009FF2BB5793F8FEB1A60528AEA65D282498
+:106B5000F9DF2AE8DAD2685C629CB43EC61943FDCC
+:106B6000F43D4EB1D0134CEC8F6986F91E99BEE40A
+:106B7000357E3F305EBFC9A7D46FFB44FFF392ADB3
+:106B8000F1E5AAF5ED4790857E680B55248FC7BCCB
+:106B9000AF77BCB814D7D8A245286F77F67E5F8749
+:106BA00093FBBE8813146CBBE300B26B4372684363
+:106BB0001294AB92C53E4036AC6B2AAE5B3C6FE99B
+:106BC00011ACC7FC8690EFE1A9A8A7669553FCFA23
+:106BD000B9E4E06FF0BB7B671753AC40C2BDBA911C
+:106BE000E7DB497DE9467C417B87D6C0E39EEE40EA
+:106BF00014ED8B0792DF9CAA211F6A5C0E96AD3EB6
+:106C0000B012E3224ECD4F7CE574DB7CB8BE3BC1B5
+:106C1000BFC375AFC96DA378D20ABC07380FCF1BAD
+:106C2000CC34505E9778F2B3D845F4A3762153E87C
+:106C30005FEBBD3A7FFF71D2E9FB5EF7F71C9C1456
+:106C4000C5FE343FA3FC1944C2FB26BD2AD7F5F884
+:106C5000EFE2FB97F894F8756821C2AB8E76430299
+:106C6000B89E4CB6EEDB6649FD99FA564114DED665
+:106C70002A5D5EB44F402F3E897C5237AAFBD78AEB
+:106C80008FF46926B767C2F2BE02CBFD48322EAF41
+:106C9000BAB95D23E15FF2CA834EF3BE533CBCF147
+:106CA000EBA5BBD09A9FE11C9814775F70131F4728
+:106CB0000B12DFD827079C28274DC61803ED9566D1
+:106CC000CDF7DB00E595D8C96E063BDC32BE7CDE35
+:106CD00027EE073E26ECA8F87A8FB84F39FEFD67FD
+:106CE000C27EB86FFFCDA487FBA21F1EA846FA7A0A
+:106CF000F29981E773EC025EEF25FAED8B8FEEDF00
+:106D0000CFE3BADA4467045DACF8F1547B3080E736
+:106D1000C9D4D18CEC5D75101F1F6869605CD83BCD
+:106D20002E8D0D37ADB3F70E9DCDEF77CE30E87CCD
+:106D30009FEAB10513D999124F8792E53D159C6FD3
+:106D4000B225DF0CFB3DDD836EE29BEE447C7328B5
+:106D500099EB2B84C34CCF7B87E66725A24F4C2F42
+:106D600072BEBA145F7488FB126B1137E0DFD488EF
+:106D7000F3F6A7C53D41F393C57D4106B78BE5FD0D
+:106D8000171D5A2019EDAAF93DFBD4013A9752E399
+:106D90000AA44C42BE3CC6EDDE8F4AF8BD651FD941
+:106DA000032988E78F8EA94A13EDF3F3BC40996756
+:106DB000F591DDB77A24D4DFFE5335D044D5567B28
+:106DC000EE340B8CFD17B46F77ABB47F94F7C03CF7
+:106DD0007514B4AF00430FF9687EA93B8CEB6FC705
+:106DE000EF1BDE453D74FBE30EDF7218E7D0FAB10E
+:106DF0005F60F9E41A8FCF4171B27C05EF155FBA7D
+:106E000036CFA0FDA3654CD81943CB4B8732F6147F
+:106E1000FE53C69D9D74CFB8A80FB694C1FC4666BC
+:106E200074D8DC0053C41D6CC1734E2B9B82D9E80F
+:106E3000FF5DBFA6A005E38F999981CE6B411FAF7F
+:106E40005833BC1CFDC18E47457FE1112DE8EFFD95
+:106E5000D216CA53A0FEA93553CA292F7788ECFF52
+:106E600046AA9FFFB32BBE386E204E2BCB31665601
+:106E70003C57C2535B5E0ABA7DC164595EA2633956
+:106E80003D9959E260F6983F4971B68E1EFFF1AE0A
+:106E9000728C83DD3EA5A15483FEF33C3F6A290436
+:106EA000D198D0566204F0CA5CCF03E5C919786B5B
+:106EB0005EA01AD793919E75E5389FF47ED6FED3D7
+:106EC00055114F65EB5BB0BF1EF8C2DB5A30BE2ACE
+:106ED000DBBF7EDF5B2DE18131BEFF56EC7EA56F0F
+:106EE000BA33E8DEBA231862CB5DD6ADF37C5E918F
+:106EF0007F33B0AB88E71589F2F02E9E772DCBD982
+:106F0000BCDCB13CF13AFF132F97B78EA4C4F53F18
+:106F100076737D0170939E4F39CE02DB13C8518585
+:106F2000DB4DED0E839DE74C8BC9D3F50EC6266273
+:106F30007E9393C329FB89FFFE6E310E0B5F9F8604
+:106F40007C3C53F0F910BFC2F394762747F0F71852
+:106F5000C0CBD2BE0DF3D926E211DB5CEC7BB36073
+:106F6000E8CC2416C27B7332FA41B990BE0FEC70A4
+:106F7000C7FA7B8D8B309B3A24B805FB9B9A9533DF
+:106F80007A455EAC1F80BBD939C602B736310DEBEE
+:106F9000C3FD314ED283CF423E0FE013C2170CF334
+:106FA00034FE7E4047E7C87CD4BF2331E9C6A4E75E
+:106FB0008B3B67D3799AA55EB13FE2E3DF6794F23A
+:106FC000BC97EE1793F9FD99CECE02F37ED6C36E31
+:106FD000916770CFCC87E91C74A79DD1F9851D25D9
+:106FE00017CD3BACC1B89CC96EACD1A2E48FD560C3
+:106FF0005C6E2CF6F71A9D3FC47E7C22FE8C71B528
+:107000008C1589E92FD7C19A0B060BF7EBAD2F63CF
+:10701000FDA7B3F0D84BCF2BD69FD56FECDD9F2EBD
+:10702000E2F802EF9AC0BB9E18CE7D924F01DF3688
+:10703000137F2D10FC26F703CFEE1AB1C9BCFF2A2F
+:10704000CF0D817E7E1A7F1F21DC9944FE4AB11646
+:10705000B80EDB1777A6D1FE80E40FC91792AE1DDC
+:10706000690D146FE97E44A1735CF1701D9670ADDB
+:10707000E7F7F665CD0DA9E67BC6A53C40FF1DA24E
+:10708000FF7113497E1EE3F20072732BCA2FDEC319
+:1070900082F3F07715997F8F40C25F84BC389EE8F9
+:1070A000C8F1FF824BE4AF70BCF5C67FFF4BD03315
+:1070B00097E859DC7980E659D387DC5679BD3C8F57
+:1070C000ED78D4EB83766304FF77B4BF4FF78A750E
+:1070D000EC5699E2E3F346BD55DCA38FC7BF3C05F0
+:1070E000F471564F19F4A50FE9D0A33FA34E67AC36
+:1070F000FD77BDE3A735A3BE14F7F6A6AB7834370A
+:1071000006C79FDCDCBE9A184A1CC76AF07A2C7A44
+:10711000EC916553D8FB30FFABDD3CFF6A625798BA
+:107120007E5747CA75BC9EEAE7E174343CFF97F48A
+:1071300094EB127ACA25F5147F7F186DDE31B8BE44
+:10714000761529603757D80299E87F7D70EC8774EF
+:107150003E6591C8CF1985F939B86E1E0FD2BAF2C3
+:107160000956F23C9D819E0CCCD7B6E6E9B02DFCC9
+:107170005C6B3C5FC5F8282CEC370187580FAE7765
+:10718000743DCBE3195679966580B3CE36C454EF7F
+:10719000E6EB96A403D0BB99EE3916727C6257D603
+:1071A00046D4B7AF7B789E4DFA90C0689CBF944B95
+:1071B0005857059FD8BE37DBCDF5C6EC04FC3BD94C
+:1071C000C3F5EC82F59C6F3AFEBDF43AC47BC7EB85
+:1071D00069A9CB4D7AA24CC8B1EC57EA21F99DAC14
+:1071E0009F22FA9BE6E17251E6E67C877024CA276B
+:1071F0002833ADAFC43FAD9C7F60BE61337FBF2EEF
+:10720000FA8DE153ACAB02CFB53AE017F0B7CD1E23
+:10721000EE8FF949C59D36EAAF62B787F2322BDAB5
+:10722000391E2BDAF6DBAA4DF889EF6FA987CBD18F
+:1072300046710FED611BF01BE2DDCDE13BBB2B87FF
+:10724000F4E7220FB71B2EBD6E5C9E9ED928F2314B
+:1072500080BE94BF58FBD2808D563DCDFB4BEF17BF
+:107260005A81E7F0D21F667ECC29033C45F1DCFF52
+:10727000171EA177F4808EE76DBB1F61B41F3F6CB2
+:107280006E60B40FCAF541F71805FA2B68E37AB8B7
+:10729000781DD83128774EB92EBCB2DD3CDEDD1E1C
+:1072A0008FE51C61C57A8EBF6160FF3C8D4FE8E7BA
+:1072B00059B2E3393C271E6ABF06E34EF2FB564142
+:1072C000FF4BC1578CF08D8BC187FD53FE8A3BB8B5
+:1072D0001CFBADFBCDCE01E67E1FECE977FE14175B
+:1072E000EAF9B5B0EE9074860EE2B98B8A3DA90634
+:1072F000DE9300F26C437F478E5BA1C9DFCBE92AA6
+:10730000C67BC20B7AC69174FDDD33E6F96FF6B821
+:10731000FFAEF4EDD043349FEE1D00AF2F86978E65
+:10732000F679CB5DB84E1C677E5C2724BCC3E6763D
+:1073300079315FA45EAC1F305F1BFA2FE93FF5B1D6
+:107340001588B7CE29744F423C5F4B3A0D675C7E7F
+:10735000A49F361C03FC50DEE32912FA87919F7B21
+:10736000E2A5BD4FF37B2D385DEAE7723A767942AC
+:107370005F7832627208FA9CEE2FAE58D7A38FDA8C
+:10738000F9FBCEDCB980CF5F7BA49C5BE9921E6CDD
+:1073900077D125B382AFCFBC382AB28AD399C6EF52
+:1073A00068F7441405CFD13634A1BF2DF504C2636C
+:1073B000CE5792F0F4D091011D47C5DE0F9BCBFB59
+:1073C000AB0779473EAA511B941C85F400C557B3FF
+:1073D000500F4039AB9DB7637BF8FD0D124F353729
+:1073E00041A7E077FE9BA790E621F19535376AAB80
+:1073F00029C47CE503833F30D1F9A8D82F40BCCC09
+:10740000267F83EBEB1A353810FD5696E5A073A85E
+:10741000B00E917E39EC629A0BFA7B199EB82E4D14
+:1074200055EFA0734253872824C7A00164BC877E10
+:107430008FEBFA6B9379DED65FBE3F14E79991CC60
+:10744000F910FA718A7E9CB40E8AF5E05F73C1AEC2
+:1074500053627AF9B0A2503F87FFE1CA4D2B9418CE
+:107460005F627F683F1D56660DA4F5B22343240773
+:107470007559F2C97AAF675DB9586FF617D1BF8BEE
+:10748000F99BCA3DD380A7264C6F8FE295D34D61FF
+:1074900075DA3FC1B853C1DF74A1FEF472BE3E9CE1
+:1074A0001756BD08D73085EE573E92142AE4F7F4FC
+:1074B000F2713245DC2653E42BA3BD80CF8897EBD5
+:1074C000FF9129FCF903F1CCF4268EF3AC13F5F50A
+:1074D000E25EEB552589F3D9067A154BBCE57AB106
+:1074E0006F81F7FF7AB9DF29F26CF93E07D8F7848C
+:1074F000DFD27BE6D2BEDDE79D37A4F0FB1BB83EB2
+:10750000F85009FCFA26059F41BA3F2FFCA64AF91C
+:10751000EF1F18012FE637D52625CEC32E11F3AB6A
+:1075200015F3FFA891DFB7B000F7D3407F8CF5F2D9
+:10753000792C6AFB7639D27BD13A85F6D3E4BEBD8D
+:10754000A46FE506D5124F5F80FB69FDFE163FCAAA
+:10755000DF871F35CEE247C971E3FDA9138DD996A8
+:10756000B8FFFCB621E29E0BDEFE76E627B86F6F11
+:107570001D60D9FF63AD1997770F28F84FE184F0AC
+:10758000E9A46FE5FB138D4E1636C3F1F150CA7BAB
+:1075900018E80DDD8CF48DC191CCC26638D864FE3C
+:1075A000BB572E1E77053B9CFB2FF0DCE8263B9D4E
+:1075B000EEA9ED898381FE3052501F95CCF38E8F5A
+:1075C000F90D52BE6A2627F61FC6093F779C9BFB22
+:1075D000C729C7A53F9DE443BD28EDF1F8EF1A7A0E
+:1075E000F8D66A4F5E2AFE00FC1B36FB47F1FDB65B
+:1075F000887EBF3EBFE4F7C12F05FF257E77F1E40B
+:1076000010C5F7F0F221CC45995066F5831EF5F2CE
+:10761000F5FC516F327D2FEDEA8AB9D6768F63BBC8
+:10762000F1F84CBEAC788ED97E5786A0FEE3FDC93A
+:10763000DFDDC93BF53AE57FFE0EFD44E8EF584A31
+:10764000602BF2C71A912FBFF1AF07B36F477BE8EA
+:107650005FECB45F5FF2D8D21598CFEC6E570C3A5E
+:107660007FB4DB2A0FDF5CD63EB802F0D12EE8549F
+:10767000E3E7F3A8F147F5A16ECCAFE6E30F6CDFCB
+:10768000AF68267E1B58C9DBBDE4B55BE233FBB0B7
+:107690000CFDECF11AD26FD93F231DDB0734B40384
+:1076A000FAE3EFDD003CFD1B18D9D1FDC729D4FF5B
+:1076B00037C76D54F0F7B7E43C5B6DB30A0DF8AE15
+:1076C0003533D98FEBCD00237408E5ABE69D681404
+:1076D00097C709EF746AE85F8D320287F1BD9C9706
+:1076E0004F35FAA3DD9EFC0E87AFAD27AEC4D71B86
+:1076F000C6560B3B7413B7C7547694717B9CD6F572
+:10770000CCE5C369DD93F3C94C13EB46260B61FE50
+:1077100031B46F253BC5C9D7FDCCE5FCF7F2243D5C
+:10772000637EE68831E8670E5913D5E6C3772F6D7F
+:10773000B025BC5FE37D817798C7BBE6795C4A5F83
+:10774000C976F63EE28C92DF93A727F6DF19BB9F3E
+:10775000EA4B1E4BBF85E4B259A7FB1025FE471923
+:10776000C1CF109EFEED1B15C4CD0991577062D597
+:10777000D30ADA91DF5FCC0C35013FF5C8EBB29D3F
+:10778000832B4C7A13FA277A6C8CCB1397F116570C
+:107790000AF77FE61B4196329EF276C97F5EBC8572
+:1077A000FFEE469FF8B84C7C2995DC2EAF99C37F3D
+:1077B00077B4E4318DE85DDDCC7F77B066FB0E3ABF
+:1077C00067C77EC4FC28EF35ED3B940A18B77AFBF7
+:1077D0000E6581097F036A22945F7D8547EE3B44F5
+:1077E000C96E8EE76B8C17A09D72C4C5E5FD7489C8
+:1077F0003B8CFB10A7EDA11A6C773A27D98FFB942D
+:1078000012DF2FEF9846F71D78763AA2F86CB56D27
+:10781000CA7642BBD691BA1FF96894111A86784984
+:10782000D3821DF87D6ABAC78FFB183E071B43EB56
+:10783000F565E261421C3F4CF81197939B52BC42A4
+:107840002E18E53D5D9BE291F613E9A723763E8F66
+:107850009D8CC31BF106C6A5201F1EE5BF9BD0BF94
+:1078600026AA60BE48FCB8317E0A5C8DF05F3E9C63
+:10787000ED3AEAF56AA1674A1EDBA2BC6F827B067D
+:107880001A55C89FDB372A1827837AD233D09E61D6
+:107890005E52FFEDDC2FAD86FA0526BD22E7914052
+:1078A000BF04713EEE773A0F71FD12E5FB0202DE76
+:1078B000787ACE4DF1D1F8E5601ED07B3D3C1CFDC1
+:1078C000E223F949D49F94F778F99C2BF8BCFF8602
+:1078D0002D8ACD4DFB2764474AF864BB6329534288
+:1078E00088AF09D33B090FB51B349ACF543D38F408
+:1078F0000E933CD4A5703BEEC04DEFD2FD3FEB7E26
+:10790000718CF8B116FC69F227DA8EE937E0BA1209
+:107910007E52C5FDAEEBB849C21E12F7625DD7C1FB
+:10792000F56F6DC70E0DEF91947C9A77EA00DDA795
+:1079300055DBEE60E84701FF2D45FCC4F3A9C48F79
+:10794000D4AF7DD113F410F793C2BA88E785F2D093
+:10795000CF91FA3922EC51E6E6EFD78A79C5F827BC
+:10796000D49262D1AF2E928BBC53630E605E66AD33
+:107970005FA1F392E9A5E277C84C7099FDBE78FD4E
+:107980008871C320F7E373679BCEA9F5E879F1FD11
+:107990003AA4377F1FE5EF593EAED712FE78FA457D
+:1079A00053B85E4FC0678FE13CE2D731B9AEE73DD7
+:1079B000BE53C3FB9224FF5C877437F1CFF6147E6D
+:1079C000EFEEF6148DFA7FA884EF3B3E64E7EBD729
+:1079D000434D4ECAA37CF9669ED7E5B9458FE2F3C5
+:1079E000B06D7E0DD61FEECFE168B52DA773772061
+:1079F00097CF205D0FDCE4655C3F727DB8EE79AE19
+:107A0000CF6AC26EF2736B42DFA9A07CD774979FD6
+:107A1000EE010D1DD26FF0F4E62BDFCEFDF4FBC7B7
+:107A2000D7B573F99374007D4AFC25E541E23586AC
+:107A30004F8E77294F921E11B9CF03FCC2ED23EE72
+:107A400057158A739195CEC011BB0FFD161E7F2D61
+:107A500014E72365FC75BEA04B912DF81ACEB357E1
+:107A6000FCF532FD83EA65AF8EC0DF0FABCA3E4A3C
+:107A70004F29B7E0BF5AE4FB6D41F703C25F3C21D9
+:107A8000F444F5B87692CBEA0F1A489EDDD3B95E7E
+:107A900073BF63D5C78CDD27E6BB86BE9B9ADC5ED1
+:107AA0008EFBC7537FA618E8D7F705E7223C2F8641
+:107AB0007EDE8683DE79885FF13B52F25CCD1F85E6
+:107AC000DE39BD4D15BFABD9A05FCCFEBE547F2CB7
+:107AD000FA8642F79A08DFF0F4F6D2491FA27FBA7D
+:107AE0002D857EE7E4D3EDDFFEC187E9F83B22D7A1
+:107AF000FAD14E485F1124FEE9CE70F937F178ECE7
+:107B0000748C5735B51FF4E2399C4F9EBE6A0CEA5F
+:107B1000ED2483CBFDA9E7D5658897FF0324F17B8E
+:107B20003E008000000000001F8B080000000000E5
+:107B3000000BD57D097854D5D9F0B973670B9949F5
+:107B400066924C36B24C02045412262161916D9219
+:107B50001016599CB014906D640901421220ED87F3
+:107B6000D57E190CA5C823355A1770EB049762B55A
+:107B70003568B441830E0808553F47848A15EC8860
+:107B80001441423245DBE25F5AFFF3BEE79CCCDC96
+:107B90003B1350BFDAE7FFC3E3733CF7DC7B96F798
+:107BA000BCFBFB9E3377FEEAF9B1A38A0959ED9538
+:107BB000120D8490CE5DBFFC577A1221D54FD65955
+:107BC000245A6F7AF6757DC04488C6DBC29EEF8A60
+:107BD000B7C07BE79FB8772C194CDB5B9BB0FDF3FC
+:107BE000275AB0BEFF57CFBFF67FE87B35AE3807C8
+:107BF000BCF7F98BFBF4F0BCC6AD75B6D292B80FEA
+:107C0000E8679B69E9794626C9844C21ECEFC1DD20
+:107C1000FBF4F67C5A6FA5A3D2EFC95CBD77400E8A
+:107C2000FDAE75B776A909DEF0125242C7FDD5E266
+:107C3000916EA8B7DB08490B3DDFA2271E63022D1A
+:107C4000FB101243CB0BA5268F144FD75566DA02D3
+:107C5000E585DFC4CCF5D2EF6AF5813C2BCC6730EB
+:107C600071423DD5A2C1EF6B5AD7EA6A4DF83DF695
+:107C7000F3071D2150E6130F393B88AE9F9027BFB5
+:107C80001E0AE3FD96101BBE3722A68890390B3ED4
+:107C900091603EB183EB75AB719ECFB276BAEAF0DC
+:107CA000F6610D743C3AEED7F0372E5416594C3825
+:107CB0003E05087E97DE56996187F527191CB07E30
+:107CC000B1BEF46A7793993EBFA9C1ED90ED84BC33
+:107CD00072EEE884BEB4FEAB41D250195E97A5C5E2
+:107CE0002EDA7FADC784E3ACD950463EA5F31D0F15
+:107CF000BB48BF4FB690A41BE97A2AB424C9042517
+:107D000021C77445D0FF53D86E371027A178607F04
+:107D10007DCE531BE9270FEADC6925D0CF16BFDEE5
+:107D20000EE5936CFEF47B8BA908FBB3DC08DF1B2C
+:107D3000C93AF8AE7BE3D4A4AD12F6EBD72584E6BE
+:107D40004D48306B763EEBAF18E034C93317DE2771
+:107D5000763DAEEF737805F7D153B0301FCA6D6C26
+:107D6000BE1AE2067C49D6D312E1EACEA9A478B3C2
+:107D7000C452BAD052122A93FBB076355C5B78FBC2
+:107D800027162796645722212323DF13A580FFFEA1
+:107D9000395DFA001DF7FE573F41BCAD05BC85F1CA
+:107DA000DD67F4B00E81B7CBE013BA0F0FEEF90424
+:107DB000F17659BB84F0A96D2FD52FA5E58546270F
+:107DC000F9544BEB1CFF1E94025580D79E3D319613
+:107DD000A7289CBA047E367F7256A6CF73DBD3ECFD
+:107DE000123CDFC3F0F4A046E301381DDC79434BBD
+:107DF00093143ECF8D081FA99A209DD4D613AF812E
+:107E0000B6973ED6707432ADAFA9260E039D57AD1E
+:107E10000A8F721E3FBD19F0C55A438A63ECB0CE7B
+:107E20008F27F4A5FDD7D69012A0D3F4F1CE3D5004
+:107E300027ED121900F56AD73218FFA6A4950E99FE
+:107E4000F66F1DEF6A83F16E4A1AE390697F0F6641
+:107E5000B66E36D2764F05B13C0570D0359769695C
+:107E6000FDC10ABB854292C2EDC954682783F48ED6
+:107E7000A7008FDDCB6AA0BFDAD4F90EC09308FA51
+:107E8000DFB37110CCB7D6DEC71143DF9FD22E21EE
+:107E90005E118F89C0FC6B297CA13EC53BCA0BF3E8
+:107EA000B9C8E127E0D8A5F32F82F975BD64201E7B
+:107EB000DA3E653CC357EBF856E41F6FEE997858ED
+:107EC0002A08E1A5F965830FEA095A8BE400BE444C
+:107ED000661A603E4BF97C9A7564B18B7E679DC4CF
+:107EE000FAE977B784FCE259A0271B941A5EEA39B5
+:107EF0009E37B3D2E22970517CB8C8F71FD184F6FF
+:107F0000BB9AE3CB9A653EA4A79AE7587F490667D8
+:107F1000E1FA30FC4D2A2748C7BB62C8E24AFA7C26
+:107F20009795956A7C7D8FD375CEE3EB70DF97D202
+:107F30007D877D4DBF9B3E07B851BC00B8D17D44C5
+:107F40003CB8296905EEDBD2BBA55B701F3DC308B9
+:107F5000D46D896C9DEAFE8FF3F5ED8A71154BB4F3
+:107F6000BFA0CDECD829C17C9C9A18A8175A1D3BFC
+:107F7000097CEF7A12C6B3A5C4389AC2F81521AEAF
+:107F8000620D1DE75CB299EDB7F75DED8C7CA04703
+:107F90003BB6DB64E223C87F48AE2B3FF45D453F30
+:107FA000D65F05EF6F6AB3A780E43278205C383C77
+:107FB000BC1BFBCC0DE7A71F717878AF2373816FD3
+:107FC0001CD4139311FAB7D071687FC93B473DB1F8
+:107FD00015E7D784EB3A60B1605991E82AAEA7FD66
+:107FE000D9FAB91A002E629D6A782CE1F0D83F6761
+:107FF00051A106F07896C9017477FFABD212C46B19
+:108000008F911225E03DA34342F703E882B8B5B84B
+:108010001FB5F52E6F74BCAF443AAB4D8A71C4489E
+:1080200088F74E947F1E9397E13D937FB19398BC60
+:10803000023E59991FC90F049F01F906F82CE8A2C6
+:10804000766C200FF6F79BF2952E1DA3F32E0A07F0
+:10805000A0234137E65718BD6CDD682F85F6AD9437
+:10806000EEC3F7FB90DE83F47B28B78F03FA8579A4
+:10807000BACC21FEDED7E28AB752F8D56A7C9BB52E
+:1080800039217E5CFBCA5D79EE28F827F8B151CB27
+:10809000F89CD11BEB65FDB2F18C14DCE6222C3D83
+:1080A000208F623730F8A8FBC9B50AF96AB49CA1E1
+:1080B000727C3ADDA4F87E844CD2B873613E6B8C3E
+:1080C0008143746749D686A01EE6910CB20BE8671F
+:1080D00067AC17F856723271BF10A5DF242BE3038B
+:1080E000625F9A13181D25C7B1F7C75A995E516888
+:1080F00065783991BF2FE62FF0DFAE717F42E4DE65
+:10810000E598F88ECE0BDBC57CE8F75B0893BF38AB
+:10811000DFE43BF3766E0DDB8F101D5D5704FBD45F
+:10812000EF6E9F768929348E90A7EAFD87F903FDCB
+:10813000C07A2A07F7FE5EF33E468F6A7C9CCEF536
+:10814000299395B0F774BEBF225DAD35939D30BFC6
+:10815000EDC49948E755F7DA40460FCE601EF4FFAC
+:108160006682FB19D88FE1E3399ED3E733E8F3D574
+:108170005AE231D03D59BD4BE70D1819CD7C4DFF6A
+:108180001B97C0FAEF361B3D32C5F30F13DC0BAD66
+:10819000B4EE29230E1FC8A51F53FE01F4477C250A
+:1081A000C05FEA48200EE05C2BFBF308DDFF2BB13B
+:1081B000EE25F0FE698D3F0B9E1312407C3D191396
+:1081C0005740687F6D7A5FE67FC1BC8FC86427ED3A
+:1081D000E712714E81755CF26B123C741DA7DADFF9
+:1081E000FFCDABF4AB85AF5E5C783B40696BECA236
+:1081F0004768B9C0A8316A8786E071D21C9DBFFE6E
+:1082000098E385AD89E95DC18D062FC047FDDEE4A9
+:1082100004F65EDDE574E2490C7FCEF8689D36A871
+:108220000715B2EE7216F1D0714F6948756B143DA7
+:10823000F39495F1AF368AFAD1DA4F733CDBA5237C
+:1082400079DB613E2D940F02FCB476E417D5BFC8EC
+:10825000716CA5D5B6DCE021D023820F48C8FF4F52
+:10826000EA18DFA17FB38CC342F213D413D00FAB53
+:108270002D1E9F86F28DEA06B34F2EC0E7DAD1B0ED
+:10828000771E8B16F8E0122E1797D6BFF995144774
+:10829000DBB5C4389A7EF79969591C8885AA1FAE48
+:1082A0004F06E53B654133D22768B4A08F4BCEA97A
+:1082B000F2D7B157D3E7B4A8B723BED0FD9D96E05F
+:1082C000F2C27E2F8867F05EB03ED6EB09E37FB343
+:1082D00038BDAAF16C17E0289DEFC712932BEA7105
+:1082E0005E4C289B0AFDFEC3EC7A16F077C1FA8B30
+:1082F0000A7ED625059E7E04F071ADD9F114EB36C9
+:10830000CB15462F87C5B89735B87FDD85FEBC0DE8
+:108310003980F7C1AC0F289C5777182C1E3BB4EB63
+:1083200015FB7FBA9132BEBC30F974AEFF04620215
+:10833000F83B36033E2CDD124B3C8342EB00851BA1
+:10834000F0BBF632C17E9674BC7902F879AD368006
+:10835000F8B3C468C2FDA9BDACC579902DBACE8072
+:10836000F89ECADFC438E721589FE767A3AD676F5F
+:10837000A00F53E8735CBFFB6D78FE506C1C71322C
+:108380007AF10EA4F3BF64B4C7275078D5E9297EEB
+:108390000CC16E5CC630FD8A649895FBDF71E42BDE
+:1083A00098CF32A35B0FF27EF9DC7A3DD0E582787C
+:1083B0005F896570F8BE8F96BFBEE19BEFFB6ECE06
+:1083C000874EE9295D44A1C3D39C2E26034ED2F2E9
+:1083D000543AA39F5359A4FA0528AFA725FDEE549C
+:1083E0002EAF17B1BABA1F7D02A39F53054C5E7919
+:1083F000D631F9A17EEF32DFEF6909CE20C04D3CC6
+:108400001F93C09EBF98E0FC02F089F2C3BF737C4B
+:10841000F559697F0B5E3720BE924DC13CD8C79E8F
+:1084200075E5F1F926479F57DF04B63EDAEFBF60E6
+:108430003CFA9E13F5F6D762BC608790A9943F037F
+:108440003F5E9749801FD371F50936ECD767C5F7B2
+:108450000CB80EB285F2698AB7DD2576DC97ADA53A
+:10846000143F814FEC3558804F087C127814813FBF
+:108470009C8F09397C33C86119E570624209CA6171
+:108480003DD039ED51CFF4C1FEB8DF8867F237DF58
+:10849000EFBD46B68F94DE3313703C5F7E38BD0966
+:1084A000380B3E79AA8F122F9EE27C70007FAF07B7
+:1084B000CE09ECBDA47E4CEE09FBA084EFFB335645
+:1084C0006529E4D8F0494ABDE4198E6FCF58E3C45A
+:1084D000BE1402BC85FC8BD8EF47D97ED3F786C18A
+:1084E0007A1618828B12A9FCFA01D58BF445F8DDB7
+:1084F0006EF82EC24F319EC9DDBA7566027A81339D
+:10850000C1C2E05F1CCC82FEC8A020F2A12584F28B
+:108510001BE9DAFB073E81344A23D3E298DC9164FD
+:108520003A20D0CC206287FE28BCA784C35B3DDE06
+:108530004968A27AE0EC04497B16F6A89014C27E42
+:108540002D7AEF0BF342DAE5458BD1A3A172E487D4
+:108550001AF73CE8A7F3B623A8F79FD4FBF29A4D8D
+:1085600051DAF5BEC71F9242ED8B9F913D7ACA67E3
+:10857000DAFC9D0FCCA178B9C42F3B60C82577FCED
+:10858000F59DE1A04FFB750EB06BA93E71B796CE7D
+:10859000FBA486ED27A957FA051A38BD50BD4A4BF2
+:1085A0008685F893D00B5612DF00D01F9612A71EB7
+:1085B000CAD36B574C25145ECB4D0DC8B7CEAF9BBD
+:1085C0008CFA7215F160FBD22DBAD3E1F26479B363
+:1085D000B2BE62BBB2BED2ABAC5FF811C3B748BC8F
+:1085E000677A98AD3CBA7EF118A7B70BFAE8EDDBD5
+:1085F00038DE96FF6CEA4348FF7E1D31503C69D857
+:108600005B9A42A2BC2FCABACBB9C41B268742FAD6
+:10861000471EF10E85FEAEA03F10FA013BB721C602
+:108620009902F6C885B2E8F37880CFA3EE729F5E18
+:10863000FA8DC37E2FE45E7D9D75978DF85EE4F71D
+:1086400026EC97EA5951BFFFAD805342F4F65FF72D
+:10865000CC2F15E562E83BBB4AFFCA40B95A77D92F
+:10866000A290D3A1F6242657B99F80EEAB07F562FE
+:10867000AEF7518168391B1BE263BA3E6C3E826ED5
+:108680003E9588310DFD6AF7723BC25100FAF1A7A1
+:10869000A07F01DD4EB4BF16A0535D7AFBC83C6DD0
+:1086A0006E88AED4EBA1F8F879204C2FD89F604E9D
+:1086B000C2711DC401E30A7A58745B45BC9BEEDBB2
+:1086C0009FEE284F710F0EC73B0F8E5FAB177A9F3F
+:1086D0004921C7894ACE2F6D3F827ADD32A32B0F05
+:1086E00098D39FF7DE867452455CC9401FDD7B0737
+:1086F00066B9FF17F25DCC67A6E7561DD3E3295094
+:1087000029DDCEE0F399D9C1F44A8DD1A9C3719C7A
+:10871000C46E4946539DCD9732592DAD8FE9993F8F
+:10872000381D0919CDE72FC1F714BE63784996B8F3
+:108730005361DE0618978E1743BCA950368D74D846
+:10874000A11C27B9B46C1E5EDCE709A43E03DED78A
+:108750001803325B279D41327CDF032FAC9B797D70
+:10876000D3AC4B8B96C3739319F98F9ECF434EA412
+:108770007C7310F22523ACDB60F29D87759979E953
+:1087800029637ABA2797389AE86B7D482B81714D17
+:10879000A68B1E58AC855824A8C7582EF9C05EB9C0
+:1087A0006831793443909F1A12819F4A6F57C1BE36
+:1087B00050FECDFC57BDB56B7D682709FE98C0E71C
+:1087C000D7C4F9631A61704822AE7D4E8AD7F799F3
+:1087D000ABA6923810E36E1C7F47DCA4C3305F0069
+:1087E0003CCAF949DAD3E172C6E6D22AF85FCA5C1C
+:1087F000653DCDADAC1BC9490BE8A392CF95FA7589
+:1088000022DA7F83C09FA3E3FC66561F362F813F89
+:1088100079899CBF733DC4C5FD01B5097A827EC4C8
+:1088200064A3910C41BD242F91F9073EA63B4DED69
+:10883000C620F2F3C271CE010F50386F7E4F76DC46
+:1088400049F769B3D9BE510BFADE3C89E9F7DA562C
+:108850001FF8875A16591D5BA13DC679CF3FA1FD70
+:108860003D9980BE55077EF94478D1520ADFB56440
+:1088700059F0BDA4F220FA53837711D4A722F0F463
+:108880000A9D3F85F713880CB49F6596D5CFD1F725
+:10889000D35CB10E29ACFD4968A7F394385EC0F3F0
+:1088A00071C3C0FE657FFD3A0AFD4EF06F386594D6
+:1088B00087751D856F98E83CFAB90B1D80B6FD3BA6
+:1088C00078FC25C9E065F1074AB5741EB38D6C1EAE
+:1088D000751DA53797D0F6FEFEA104E210B187ED15
+:1088E000F36BA04943ED6EF8AE2C16FD5EC7B8FFE2
+:1088F00089707E305C456FA342F88FED85A24ED51E
+:1089000006E730E6D6C07A12A30307117F8C3E6FCC
+:1089100024A13FF8BE3CD41FF2A3F1A1E610BDD1C3
+:10892000A515191D4D35F4BD839513110FEBC0EE40
+:10893000A2FB315CEBDB07F43D8A9785BC244B9AA4
+:10894000119E5B37FAF6EB72C0D5E292A13ECC7273
+:108950005713F43746F2619935F7DE2640AB7DA018
+:108960009C217EB92B801E3757100BE85F4D231CCE
+:108970000E0B6D9A3397F96767CF357AC1DF3F5B8E
+:108980004B585C4CEBCEF901A5AB1F2C607E61A867
+:108990002F08F3BB8838C8316AC7EC8EA20FEC4BA6
+:1089A00064724A7C5FB749AF8837ED4D3461FB1381
+:1089B00089133C89A8A7B97380FE3627727D6C1095
+:1089C00019047C258CEEB722DD97BED51B5F50B60F
+:1089D00073BE30DBF90B1DEAF19C3F083EEC023A16
+:1089E000A4DFF925A70EE0F7611983FFD1D295C85E
+:1089F0001FE610373EA708A27385FB9B2685E94337
+:108A0000749CD92EA57E3467AEB22EF0558C3BCF28
+:108A1000AD6C9F21F4DB494AFD76C17F5DB1A21C9C
+:108A20004C797ACDD7D9185F413F411DDD27165FBC
+:108A3000D1B278CB26BD17F4A4BAF6B5076D40477E
+:108A400077104E47BBA56518FFD92D2D0FD323FAFC
+:108A5000D67825E0FB03E99AFCB8AF418C2B1DD3F7
+:108A600079F741BCE5D84ABA623ACF37F42C6E792F
+:108A7000208678C06F2DF0D33C83F95D291A63FC02
+:108A800024C312EB007CDAA229423FED9638B323CF
+:108A9000DC2FBA7523C5BB30FFACDDC0428CC77A72
+:108AA000B17F8F24323BE74189F9C93DF38C68EFF0
+:108AB000D9FAB91471099B4C4E80BFD19368473CD9
+:108AC0007A90FB4320AE3794965E89E9333DDFCB45
+:108AD0006413FA2755FCC796E8C0B8802D3E1FFDE9
+:108AE000FB733B0A9F447E638A710C9042FDCF75F5
+:108AF000B7689783FFA0A345BBCC14C2BB93025FAA
+:108B000063492CE06B8FBFEF0503FAFB7EA871056C
+:108B1000002F6BF4BE02A2C4E7C0D5E4D80A8E2FA2
+:108B2000BA32D7BCE5743EDDEFE899FFEB0E82F474
+:108B3000FAE21E2BFA2BB53308CA934DA504F1A116
+:108B4000BB4542FDED336B35DA019BA46694135DA2
+:108B5000091370FF56990EA05D5BFDA8EE74B8DE98
+:108B6000B5EA49657D35F1A35D5DF35C043E23FF05
+:108B700012FCB1B64DF91DE9AFE48F859CEF17B932
+:108B80001C332B60EA731DFD985D4D7C06BA8E92F6
+:108B9000B7F5DC4FBC80C94DF2B404FA56B7F99C66
+:108BA000CCE89CF1E312DE9F5A0E95707D6A2CE5AD
+:108BB0005B607F0AFD88BE8FF5039A0E3955139AC4
+:108BC0005731FF4EE865826F8B7D291D41C8088AA9
+:108BD000F7B9497C5F73492EEC2BED1FE901504238
+:108BE0009F80FD7BC06E1BC5C7A3FBEE0139EBD197
+:108BF00018BD80479BA57AE4D346C2F9B5E446BECA
+:108C0000FC3B8F4706B88E24F533A7D2F7461BFDF1
+:108C1000B1000F8A0F7949B6109E34115FD66E49A4
+:108C2000812FD8DE697D2B2ABE08F9E2FB90E91777
+:108C300053E88AA19F0A08F8D0F280C4ECC289A642
+:108C4000FBB5F0FD5B9AC9880F9388570BF3ABB067
+:108C500028F77962AAB23ED91E8107328CEBE4F084
+:108C60009C3248D9EE147C8D28F95A0EB982FB4CFF
+:108C7000EE3AF443F00BC46E208340EFA01A22D2E8
+:108C80009B9A1F4C4AEA355E3229294ABCA49BFBB9
+:108C90007F6F2481AAE7A4487CE93AB8414E0DC30E
+:108CA0002B81C7AFF0FC0AE9751E972D66FEC090B8
+:108CB0009C67F8328CD76E047CA3EFAF1478924D8A
+:108CC000B2014FC6B4C7F8640AD742DECF8D8037F1
+:108CD000452179EED398ECFA5CC00FC716598ED4B3
+:108CE000DB9313EC882743354EC49312E24884FD8E
+:108CF00019616C6DD2C2FCF70CEFEB3629F0620DF6
+:108D0000E28544F102E92A422E2ADB557823F6EF68
+:108D100030D79727124F7F188FB2B103A02FFB7265
+:108D200018DE541027E2C99BB99379DCDAADC57E11
+:108D300088521E961B9578A0C62B3AA2267C5C35DD
+:108D40009EF58637D98037421E265E1B6FEE49326C
+:108D500029F4EA30BCB927A9A477BC51E38BE027FA
+:108D6000BB632CE5A097D6554BC88787BED3BF09F8
+:108D7000EA03D7E460FECB6EAB03F5D6BA7AD65ED3
+:108D8000EC77CA901FD3AF81B7E7B8CAA15EB781AD
+:108D9000C5294A8EB1FC99FE77B0F6C23BEBDF30B5
+:108DA000837CF7B0EF5F39BF598EA3EDDECDFCFBBE
+:108DB000D2E672A8D76D61DF7F067126BABFC34EB7
+:108DC000789BE0F97577E73898F9C9F4D9711C4FA9
+:108DD000774B2FBC81DF35B3EF561C32F621A80745
+:108DE00033BD752C5FE7B847D93A933EBD69929D74
+:108DF000E2EFF2A007F5A6B39A9A61C86F7AB13391
+:108E00004BA5E60C2829DE209F711A295EE7B238AF
+:108E1000E44E3AC45B49CC9F21E277904F109E3FCD
+:108E2000F0561293F7E2BDE404C2E2CD0F9BD11FCE
+:108E30002CE28BBE87880474066BE4F23F6ABC7137
+:108E400062BF7A8C334ECC1671C68076091DB7F09E
+:108E5000EB2F2644F3A71C4D627AEA399E1F219E10
+:108E6000577B73348017BB0149D20148F5BF07BD5A
+:108E700009FDAF4C6878C808D857560F24D56CDD6B
+:108E8000428DF4159A7AAD07844C16B5BF68D7D3D6
+:108E9000FDC4171F1739FF895AE203F944B46CFE69
+:108EA000554D540E4A21BE345BB09DD103904E67A0
+:108EB000F17DBA28F8CD503214F8CD6CBE6F3F303A
+:108EC000D6EB98BC6CD6A9E8FF2F48FF3B7AD59B20
+:108ED00095ED2AFE50CDC7ADE2FAF24A1244BDE04C
+:108EE000ACE4C5F2DC0EA62FAF361D43BDA2FB617C
+:108EF000A627D69000EA1D6AFFE1EA5DCAFA9A56F3
+:108F000065BDAE5D59EFCEF7E038DD3BD60C03FF13
+:108F10005DF5F677D02F5C2DF88457C927A882C459
+:108F2000F8C443D7A3DF4663A47CA218C0D507F3D7
+:108F30004D86126722F00310B25FD3FA5DF0491A32
+:108F4000AD6B5C093694339312CF88F1658CE7BE24
+:108F5000E3B487F6A5C72E54F18942E18FE99F80DB
+:108F6000FE2AC1370AB95E4226A9EDC6FB91FE86EC
+:108F7000F25ABE8DFB53B8DD23F40CFA3DEA197E9C
+:108F80008DC9ABD184EB155EA4C72223951348424B
+:108F90000E23B3579A896A7F0B6D57B79B94EDAA3E
+:108FA000FD1776CB30BEFFF388BB2FECC72CE23A1F
+:108FB00008F2E1E887D50A7BE9C33F4E10FE14B4FE
+:108FC0009BBEBDBDE4FB4EF652CFBEC750FD919691
+:108FD000E533260F7800E2E36D3198F75927B17D2C
+:108FE0004E9E772C2BDC7F78B491D8B46174DF343B
+:108FF000D96084F860938ED91333A69C1AB6248C5A
+:109000006F3C6F2C9D0DF0DA2CF97FF411D81747C7
+:10901000648279351D36DCF74BCDF439C5B74B8FFB
+:10902000DEE0F0D0C717742CDEF899545F05A95024
+:10903000621E551B7E1FA3A5726C85EC7D2D00F171
+:1090400055C9FB720D6D3BAE772F85FE576B7C7A51
+:10905000E6B7F3639C54F4DFBB1FD2837C4CBF9F05
+:10906000C9C5A0D4C7C1FCB89EBCF078D39264E651
+:109070006FFA30C15507E308B927E20927D74E8CAC
+:1090800007D1F02571C6439C53D242CC2E723CC806
+:109090002BD814E6573E19133D2E70878DF1579843
+:1090A0003EF0F734ABF32736E0B7DCFE3BC7E35DB9
+:1090B000E7E258FC6B8B8DC9810EFEDDE3BC3CC73B
+:1090C000E363E7129476A378CFCBBF3BD368346ECB
+:1090D0000ADB4FFB43867A2FE653F1FC9106C2EC84
+:1090E000A43DD696AD61F1D0676DA51D000F5B3F25
+:1090F000A73E0DE0B787C961884743DC78A4C5FD6A
+:1091000020B4D7DA8913E2AEC41ED0CF84F823D8B6
+:109110009DA83F307CE98E61A598D7B3B6CA0E589A
+:109120006FF7DA00EE674FBD92F1C7676D2E1CB77F
+:109130007BB668E7F56D01BEFFCC7F20FCD9BDC5CD
+:10914000C3D4F12F2A38989E1DC3F8983AEEBD502B
+:10915000F0311EF75EC0F9D0C20EE61F5F64249B9B
+:10916000FBD2F6C51D29CC5E8CF3E429E2DE9ED845
+:109170006F95EF20F0B33BD3DF13AF7D382C5EBB90
+:1091800086C7FBD688F5B529D777C4D66BBCF688D9
+:109190002D4ABC569D17F032C8F7FE2178AEB3B009
+:1091A000F557C835E57AE013CB08E691AF3BB2B48A
+:1091B000C948EBEBEE02CF1FFC317D750D87576F71
+:1091C000F3B3B934C4AEF013F721F630BB38CD9DFC
+:1091D000A0A8A3061C9687D9B73A5DF17D667DAE3F
+:1091E000E2FDEC0DD72BDA733C458A7ABF2D372A86
+:1091F000DE1FD05CA6A80FDC7E93E2FD42D22F1EBC
+:10920000E3B18765F09590EBBC3314ED37ECBA45CC
+:10921000F1FD67A4FEC1D1F4BDB618260788C7E9E1
+:109220001F3C2C94779CDFBA44F17D93D43ACC4711
+:10923000DF5FE667FEF621EDAB14FD5D889BC0ECB9
+:10924000081E7FACA7FF181FB7CBA80FB54BE46172
+:1092500029321E59DD71EFE6BE2452AFA07F28E708
+:109260005751390F7A945ACF30279B93101FD24908
+:10927000FAD7617415C20313EA61971E95D19F5600
+:1092800048063E341AE1A3235E7BE47E5D22CCCF08
+:1092900073E939B303FC652B8E2C45FC33A42AF10A
+:1092A00020C6AEC483D8414A3C303B94FB1E3F42AB
+:1092B000B9EF6A385B9D4A3C107014704E9CA4C490
+:1092C0000B01DF11F41FC0B788040F619EB5577200
+:1092D000F84894786F7B0BAEE35A7ADB70153C87C5
+:1092E0001E703699104E2CEF4AE84906EE9F56FB49
+:1092F000CD85FE313199EB3DBC1FE1E7DE2C795085
+:10930000CFE989678DF065F97240DFA927CC5FE26C
+:109310009A926C8BEA57C3E7BDF9D5041C853EB31E
+:109320001AF4193ACE72E246BE7486EB332B4CF730
+:10933000635CF0C21F197CAB8917F9F5B78D978371
+:109340009E48C2FC8D6A384A1D92CF0C74C0F976D3
+:109350003AE9107CDB8D791314ED8CC314F105A56B
+:109360001E4A9C52387F127AA9184FC053F02D31F3
+:109370009E81D4CBA940072A3E4606A9F554A5DF15
+:1093800043F84970B0B038C6F09EF804B313437E7A
+:109390002FE6E790B3739A08E8DF16E1D7F0CF879E
+:1093A000E7C2AFA1B6EFAF15179DE991028FE44474
+:1093B000C643457C952EF3D38FE8C7A3257B268C27
+:1093C00037E3958136A289E697739C7895F6236BEF
+:1093D0008289E1FE32E1BF7E530AE0BC7F409C3FC0
+:1093E0002561FA422D699D303F07FC9F546EC541AF
+:1093F000C9FC3EA45DAD97B278A286AE04F07B3581
+:10940000098B17E684DAB12E47D6459ECBB5E4FB2F
+:109410000D2916EEEF60F93984F33761BFF5662F39
+:109420008978FE413D85495128AFE5E5646E6716B0
+:109430009002E89FD2D52BC9689F533A94C2E9AEF7
+:10944000270F06DB23E84EB57E11CF97CDC5E87711
+:10945000591ABEDE6F000FA147FC8BAE0DF6E7FE7A
+:10946000643BD6D7F439F907273417FB15F98C7507
+:109470007A963F4C5A95FAF3C7C91AAE4F38E56F42
+:1094800002A7DEF781E785F17DF8A6FA90C80B13F5
+:10949000F03B23F86008DEE7147CACC76EEB81F785
+:1094A000B9687C4EC0E36289FF69D827D97C2C1942
+:1094B000E0FC0FB3EB22BC9F79227056D284E655B4
+:1094C0002177623EE8A57619EDA4DA312C4FA87613
+:1094D0000F06CD49578701E382D5ED6FA07ED6D91F
+:1094E000481969FFDEE1D4B35E15BC7BB357C47A7B
+:1094F00074294A7C13F922749D312951F3017AE0D1
+:10950000A06CE77010794A15F2E0F840985D728817
+:10951000EF7B8CD6159F42C72F7E3F230EE0532151
+:10952000771C4A07383448785E699C8178C0DF9F91
+:10953000C6CFAD8D08D43B2C141EA919263C7F3410
+:10954000F087B20BE299A71AD627C0F9AACF1BE978
+:10955000D0D4EE1828695C886FE4858F7F5C0C712D
+:10956000B60598A7BCD0C0E2FF393F8AF5F5A37CC9
+:10957000E2753D3102BDE972EBF17C46D02AA3BD14
+:10958000912493F1805F02CE49B16C1DE279E963C9
+:109590004F4A90CF249E8F6B0A0E5D07F94CB0EFB7
+:1095A00025A1758E2B0F0EAD3785E02CF204893680
+:1095B0009835238C3E8E7078D4DAF49B411E761950
+:1095C000B91DC8ED4162D1221F69E0F1F69303A8ED
+:1095D000458AFDF8CC9097551BE38C1F0EFE2EC8D4
+:1095E00027A0C5971667BC15D76F47BDB981EB5744
+:1095F0005D3CCFBB6172590AD853BDE53F4D4D610B
+:109600007A7E0D8F838BE7355A1FE62DD540DE71AC
+:1096100058DED3B7CD3B16F9E6BDC2C1AA255A0A1A
+:10962000875A89B8AEF6DEABFF92A3DABBEB5334B0
+:1096300057CD835B952229F2DC6A21CF8D3E6AD813
+:10964000539A42A2F4D7236F2EDFA8C8271379D2EA
+:10965000B597C7623E59F9CF3AF19C20F46337853C
+:10966000F2DC7A83F3916406E75AC80F1B1AFE9C5A
+:10967000E151A8FF24DC875F0300C1DFD12EA35F87
+:10968000F6D7873593764699EF76BEFEEB6D5AA4F2
+:109690008F1B7CC4D912657CF19E38470270AECC1A
+:1096A0008F9C5F5B596011CC1FF257A38DB795E378
+:1096B0008B98775B42A08AE3399EE3E8A95B94FB31
+:1096C000F80CDFC7B69B0259781E6972F47C7AB138
+:1096D000DFC3B4F512C02360761F44BD730EAD0C1A
+:1096E0008173003E0DCBA36274D6DBBE87E0AD5123
+:1096F000E41546C25B8FFB2CFA1376C9F9ED32C62E
+:10970000FDCF1FE574499C2689D2D7AD5C6E9D279D
+:109710002C7E70BE59427B64899B900D94BFDCFA0D
+:10972000E46A8CDF543D357433882B787E07E5235B
+:10973000B7A6123296964B3629E3B7CBEE8E88D772
+:109740009070F948D54FB4AFABEE577E574DEEFE53
+:109750000BE83FD52AFD6620F777ED4DE1F6C230E4
+:10976000320CF8FBBAA7BED043EA6E6FF8FE39A5FB
+:10977000EBFE5AE083162CDF4D711E003EFF718A0E
+:10978000FB4DE0DBDDEF31385CAAB9C4F8FEA3493C
+:10979000286F0CC09CE9FF1AE6B338ECCF28BB80D9
+:1097A000F89BC1C0F41BA1D7C9F27A398EB68FFCE1
+:1097B000734302EC5FD2B3132781DE6F7B36D60989
+:1097C000F0DA5AEA2C043FC0D64A13E633180D2CBF
+:1097D000FEEBFDF5C8FD100EE8DF7A6F19D8A196F3
+:1097E0008E7D3EF0936CD1FC05CFA16C19CBF2DDE0
+:1097F000C438751D95BB613E59B398DCD89AE32CEB
+:10980000B484F54BB89E56CB61D6BD77E03D70FE73
+:10981000FD91C3A826D3F5E5A23FEE7AC2F653E444
+:1098200055C1D8E1FA6827953F909C27EAD7B74AF7
+:109830003E1D5DCF9AB6DD18C7A8B9D3973C1FE48B
+:10984000CC335A8C0389F925BD9E5606F11E215F43
+:10985000E64B1694FF42DF9E47C41F8B17CDE57879
+:10986000308FEBD9F363197C971047167C778B9177
+:10987000C4819F7A7E796B09CA9FD53A2BE835223D
+:10988000EED1BB3E10DD5F54FBB4999DA795827964
+:10989000D0C9E7D4FE20CC6F14F57C52522AE3AF36
+:1098A000B5795CEFEB4F9C1067AB7D6D600BF805F5
+:1098B0000C7D583C96F21DE38822D47B8D60CFACA2
+:1098C0007C35C6C7FCD65E7E6ED6590879217533C5
+:1098D000328A303FE104E51F66388F18C8423AA546
+:1098E0007C45A2B22D7FBB65AA16CE0DA653BD8ABC
+:1098F000D6E7A7664DD5527CAFCD0D546968BD69DA
+:10990000FB7056BF3E7016EADBB697B17A51A04A9B
+:10991000A6F55DDB5DEC7B30F02862BDB47DCE54F6
+:109920000FE813562EAF1D013C475CFBCA404DB8F3
+:10993000BFB22595F1A5CFB9DFF5F31CB27806C00B
+:109940007B5000CFA989F77E9A2AF45C96E72BD644
+:1099500029BE23A9D1FB1F9DCAFCC42BF9F9DF71D5
+:10996000B1644B0C8B5779E228FC0F740CC4785B04
+:109970004E6A028717EDA738D48F80A3E84F8CBBBF
+:109980000AE42AF05B1DF39B8AF6C9A98C3FD271C9
+:1099900036E1388319FC6B676414C2BED1FDD2F284
+:1099A000FDD232FBB385CD8FF66B2D40FE3E14FC0D
+:1099B000DE07AED0F77342F356E3C70F387EAC6CC8
+:1099C0006271C6A0B51FE2D1B858A6EF9162E53A20
+:1099D0007671F8B5A45A997DD5B31F29128ED3C4D8
+:1099E000E19841E19EFFEDD75DFD3DAD3B6CBF9C35
+:1099F000709EFF40FB753BC3D723F2B6453F9F6F78
+:109A0000547D3782E54FD526F4C3EF7E16438CF89C
+:109A10009CECECF92EA780E999A07F8AFB1D886752
+:109A20002C3A0B6A38D7E8B9AFA195E711F677B2AF
+:109A3000F3CA33A616F3F559F8FA2CC6B07B1A7A96
+:109A4000E8F158306B9639127F7BE0DED3DFE022FD
+:109A5000DE9F82AEA3F507F4D1DB7E3CCCF1E3DFE1
+:109A6000B61F629E2A78F6C059353F014FA067FCA9
+:109A70006EB0121FC53CB7A58ABC61155DE77CC7F7
+:109A8000F14AD9776B6EE3F9C076253EAF69CBD149
+:109A9000401C5D7C37097CEDB690DF6D6F2AB7DF27
+:109AA0003248462F7970FB52A3FBEBF0B9DA7EEB1C
+:109AB000B6B2FC67B5FFA0DBE6F0C3B93ECF457692
+:109AC0009E7D944ADF8038CC0BA6D0772179A2AC5A
+:109AD000C7A531F845FA838278FEB6D850F6A2DDE4
+:109AE00041C847DBD7207F2E8E2F5B9F43EB81ED54
+:109AF00075ACDEB7EC8B1CCABF4F6FAF67F51BCAE6
+:109B0000BEC8857AEA5A561FE77C51C608C2DAA950
+:109B1000E3D342FAC3A7A976A67F946B08E09141EC
+:109B20005EEB003929E0D95B596CD0D447D34F3B69
+:109B30007BE899C5294670F93C42D8E701ADC23EA1
+:109B4000EF8E63E793BB419ED2F5FE3DD5FD975462
+:109B5000D053623B17E5D0AEEE8CFD580FFA90E47F
+:109B6000A4FA06F83BEC16B200F2EA3AB7BA403F64
+:109B700022AB1C462DC293FB9FE8DABEA6FDBCFAC1
+:109B8000DA33B7F765C3B8601E2339FDD7BDF6D504
+:109B9000DF204E5AF7B9C901EEBD911D3BD6837E39
+:109BA00035B2E3ADAF98BC65E735C4BC47821F91C1
+:109BB0003E1FD16EC0F98FECB86E39BC3FEAFD8E06
+:109BC0007E801F634EFA9A801D74EFFD5D5FC5397C
+:109BD0000DF299F45DCE69F4C0E3CF54798A4778E9
+:109BE00024A6D9001E57305FAACB76747300F534D3
+:109BF000E57918AA97639CF512E9E380788138F734
+:109C0000ADF65B9EA8A4EBA3CFC704E90CC2F4E5B4
+:109C10007197A97D1FA6679712ABA25E6E4C53BCCD
+:109C20005F61C951B44F4CBD4ED13ED95EA8A84F1B
+:109C3000193452F1FE3447A9A27EF388C98AF72B62
+:109C40009D958A7AA1AF55F1FED0C3EDCAF6637631
+:109C5000DC87A1275DE5A0C73BFCEE262887773689
+:109C600097C7DB4984BFB638E06D82E7A3AED497CF
+:109C7000F84894732CABDCE8E78F38C752CACEC3E0
+:109C80007769D8390EE19FBD12EB9E9486FE590A82
+:109C9000760AECB1C66022EC57C5E26D983775299B
+:109CA00048D09FD5A60FFC7C14C8F98532EABD6D5B
+:109CB0003CDFA66D6EBE177C7A27A4C0CB10AFF731
+:109CC0002C64E704C6500D17D70DB14D09F6C9AD88
+:109CD00058772959A9DAA7B58A7A85E536C5FB13DD
+:109CE00053372ADA27DBEF52EDD3BD8AFA34C70E99
+:109CF000D53EB5A8F6E91945FB9833812620A37116
+:109D00009D1ED94CE77FE389E672D89751273D0B1A
+:109D1000815E8A7DEE2660872507EADF80D247EDE7
+:109D200029F053ED6F4CC5F240A31DFD4C871A0777
+:109D30006179B8D181CF7FDF3802CBB71B9D58FE48
+:109D40004FE3242CFD8D2E2C5B1B5BF1FD171ADBE2
+:109D5000B1A410CC04799194D8730F4326D8F35D45
+:109D60009A402D4452FF3B6D1FF2C5AE3E812EA896
+:109D7000DFE9791DF9E24A30A628BDB54049F7F37D
+:109D800067E94E299D96DBD2D873919FD0AA7116B0
+:109D9000827E7D5FDA91BBB59954AFDDE84AB55854
+:109DA00059DD48EBB8D998A775E46EE768427E03A1
+:109DB0002203832647A642BD3B86B56F4B3B82FA02
+:109DC000B58823CF0AC591EF03BA57C7917F73CEE9
+:109DD0006E067FCAD12B03CDB0AEA3DC7FE4248511
+:109DE000BA5B6959AA2DD4815C3CA1D2234459A7FE
+:109DF000297D04FA6DD53866637EF04D3A02F9E8A4
+:109E00003324668FF6E881E94C1E754F33A0BD738D
+:109E10004CE35C8E794F52F07180D78B3B3E44F817
+:109E2000759B83590087DD3B4EB0BA2DF8B8E40826
+:109E3000ABEBD83A7FBDE383A91E53D4753E9F1682
+:109E4000255EDE96C6CFC7FA9C99207F45FD58A5B2
+:109E5000730DC88963A5CE01309FA32E03D28FC78F
+:109E600065F642DE25D13A4B6687F9550AD275B8B8
+:109E70008E597A4667E41639EAB9F3A9E94CCFC29C
+:109E80007D037B6E5E2CEAE1C734D1CF8D2FE3F0EA
+:109E9000B9D027BA7F65793A93836533CDD85F7798
+:109EA000430CC671BB5D03510FEAAEA750A2F4D1BB
+:109EB0007DAEFEE24BD86E10212E8C57CEE77CEAA9
+:109EC000371DEBFF7A9CBEFF7143AC0379B8E57A8E
+:109ED000944FB7F09717261A516F593823B30CE4F3
+:109EE000D27C1EF75A64D62663F84B6BD5C39542D5
+:109EF000CB4C859B41FC572555EAADB45E9DB176B0
+:109F00003394ABFADFAB87A39A3583776F06F5718D
+:109F10000D25AD12B49702EF34D2792DDE20DB99F6
+:109F2000FD24CE1FAEFE567916020F8FF17C190A62
+:109F30005FB40BABD225855D52C5E1F5651AD7DB61
+:109F4000F249FED7CA78CE65C093CE85EFE4F5E23C
+:109F50007757B673BDED0F7A36AEFADE0A31EE0AE8
+:109F6000BEEFC7F4C429811E778B19F1A360EE17E9
+:109F70007796D0F517745834188F177CDCCFEE0F16
+:109F80002B39E3463E37BC33F0F4718278DE0E7431
+:109F9000722D3935D3B311E5C3C82FA9FC01BE78A2
+:109FA000C5FDF1716C4D8A7A2ED3D758CDF9633D3A
+:109FB000F2B5038D1BB07EA8D183E5E1C62D9C3F91
+:109FC0003663FBDB8DDB397FF472FEB80B9F773491
+:109FD000CEC5F2B5463796FF30BB32D3812E8C6E9C
+:109FE000CCD33CB8C3406488377418104F29053C63
+:109FF000FE4812E4C1182C70FE4E9D0FA3E6B73D3B
+:10A00000FBDF16712FC675304E4FFE0BE867D9BDCA
+:10A01000E3CF516237033F294DCF9C06FCE3A8DD17
+:10A020006E06BDB5EC615AA7DF1E75DACD3A5A2F20
+:10A030004FCF6275B7DD6CA0F5F10FF3BAC76E8E26
+:10A04000A1F58AF46CF6BD9760B0FAA6F4FED38051
+:10A05000CF9612E900D043B931673CA4CE56584A96
+:10A060000F001D4C4CBD753CD0C19E343BBBEFC2B4
+:10A07000BEF100D4A70C6AD1C2911BA7A970137CB2
+:10A08000579654A985EFC667ACDD04DF4DE87FAF76
+:10A0900036FCBB4983776F82FA54478B16F4C13D77
+:10A0A000692C0E2AFA1175D12EF8ABC8D71AD2E155
+:10A0B000423E5ED0EE423E2EE05236ABF2A7E0A723
+:10A0C000AB6B972C12CC6396D41384879CB8DA2B95
+:10A0D000945A289F9D973EC4BC917E5707F51BB1AB
+:10A0E000BE6D6374BEBB283D8A7CF980D329C84D00
+:10A0F000C88BFE40CFEEF5780DD687FEC35BCDB79B
+:10A10000627F6E33C8D703694C4E1EE6E5655EFE7E
+:10A110009397751A6735C8CFBA741E4F8CA4EBF5A8
+:10A12000E98C6E55E7057A69E774FDC3741E5FE636
+:10A13000F727AC21EC5CD1B5F2B65686DB6F3990CF
+:10A140009FD37A08F246D579103570DEA85F643E59
+:10A1500030E58B2CFFB15D9947DA637FF4617C0FAA
+:10A160008E3182D1F1F3DED77DDF35D67D5FB475D8
+:10A17000AF242CCF59BD0EE2B6216D89BCE7C8F5DE
+:10A1800004A2AF27621DFC9E3E55BE35D58376C224
+:10A190007C2A169B09F86FC2F9C4F1ABF00935DFD0
+:10A1A000F977F1B3ABF09BDFC13CD5FC469C7B5605
+:10A1B00097429F83F352907707F7BE809F7E63B2EA
+:10A1C0007B3FD0477759F06F1AB0CF92028867690A
+:10A1D00056F741E85FD2B3F8BBC8673DA7F1FC165C
+:10A1E000F4A2F7D25722DFE902E140E9F108AD839A
+:10A1F000DE33D2E27A0BFA238318FEF496A7799421
+:10A20000CBC5C89228F215BB5BBECA423FD635F01B
+:10A21000BD373854C8A303702EE0D2885854793A19
+:10A2200025E2938A20EF3A19F588CE4CBD16CA7FF5
+:10A23000B79DD8999987FDABEDC5CEB4114636EEE2
+:10A24000844950B6EBDDDB6F053B69A401EDA477D3
+:10A25000799EDFF4D35792405E4D977DC90552A495
+:10A260009DD979644199BD20D2DEA4EB1B0FEBBBD5
+:10A2700096DDE932FA13008C6AFBB366C3DF08E4AB
+:10A28000478FDA7085C0FD65D7B647890C6CA2E8A8
+:10A2900084E30D284BCE38311D67D8B9FA37A01C9E
+:10A2A000F92533CFAF955774E3E5D637D831F1C1EF
+:10A2B000CA7B1746BCC5EC555E46DCEBB6CAA3CCE0
+:10A2C000572BF595601E851C8883F2A21440BF971A
+:10A2D000AC61F731887B18A81D9BD3D706762FCBAE
+:10A2E0009B1A07F9467472153FFE70D1ED48F7319D
+:10A2F000A8FFF4D8B12F69304FA04DEB8C1F037627
+:10A30000EC86018E8DB4FE27BFED8157695967F940
+:10A310001B09BFEFAD66C32545BD7363E8BE20C80A
+:10A3200087AEF9978C72A786902DB05F3564BF7E9B
+:10A330005D981C24AD7FE981FB10CAE72A017028D3
+:10A34000078DD39DF4BB4A6E6F107217AB733B8BB6
+:10A3500078CE4DC3BA8DBFEF59C0DA3345FBC2E9A1
+:10A360004E3A4EE500D1DFDE69584F1375DEDF75DA
+:10A37000A2FE007B3F477CFF12ABE78BF1DF67E378
+:10A3800099D9FB373D72DB74E00382BFBBFA2AEF39
+:10A39000F9A1FC7E565FDB55F34A94ED5C1E887B89
+:10A3A0007D2A7E3C39F61DA0E7560973E06AEED09F
+:10A3B000A17FFB42426B41F839659187E22A373B26
+:10A3C00041DF5BF3F2C09D32CFCB017DE37E9E8FF8
+:10A3D0005F219B301E71E96EC6E77BD3D7AA36BCDE
+:10A3E000A2D8CF88767EEF3206EAE87817B7A56064
+:10A3F0009E3BE9EFC778F8BABE92B8BF11CFB98AD1
+:10A40000BCAFA47EC409F669D2EF62D8BD9667FCE2
+:10A41000C87FAB7EC7FCBD6B76BC81726E896C4712
+:10A420003C7E27C7BD01E0D36566F717566D780DF2
+:10A43000E9B5299BEB0996E0E070787AFA72B91CCD
+:10A4400082FFA6BE255785BFB2FD7B86BFDACF2C23
+:10A45000CE49AFFA96F9695D66160775F07D3AAD9B
+:10A46000B10FE3F07A1CD67371B93FCF2A43F2B033
+:10A470003F99E51DBD5D0276D0A57A33DE77B460E5
+:10A48000FDA982F0F329A254EBFF9D4047B610BC12
+:10A490009E8BC4EFD66BE077EB7F12BF53B401BD48
+:10A4A00003E2A627D8FD63C3FCA7F5E1F92EFEBEA3
+:10A4B0004CEEC6B7B338913A6FCBDFD7CCF4241E3D
+:10A4C0008F5933E3EDD1108F11F4302E96B4827F83
+:10A4D0009DE2B583E3B503F05AE06F282E43BF8BAE
+:10A4E000425F21FC25388E80D3079170FDE81A78F1
+:10A4F000FBD17F126FDBA8FE8B71CC9762D07FA25D
+:10A5000086F3BF385C05BCE333AE0EE7F88CEF078B
+:10A51000CEF11976A5FF81C3BB37F9A4DE1F31EF59
+:10A5200028745AF25DE8F4E7999C4F6903982FAAC2
+:10A53000DEF7E48C887D4FCFB8FABE2BDBBFE77D1A
+:10A5400057C34D5DD6F0F8A6FAF9888C5EF9DDBFE9
+:10A55000058EFFBFF9CF17D6EF53B42FDE7044D16D
+:10A560007EABE73D457D74C05F0E682EFCE163CF96
+:10A570000551BFFCAE7EF5DEFCE9D35F5CA18178BE
+:10A58000DB083FF3E7FF35D3BD2D83C2F95D8DB7FF
+:10A59000C94CE13AFC642BBBBFAB3A0FF387D6F34F
+:10A5A000397E31FAEF1FDF4EF1E60B62407FA76F75
+:10A5B000DF755A7B7E241E945ED61067581E5AA9FA
+:10A5C000D1AA75A2BF8638A3E1CD7D1C6F30FF876D
+:10A5D000D2FB5C23D125513A9F3B57C27CA7B9845B
+:10A5E000E545D3D2E7A6EDD3B5C407F724579AB40F
+:10A5F0003E03C6F994E79A0DFC1E659294A838DFD5
+:10A600002C3B65CC4B9B3D82C5076F31B5E2B9D27F
+:10A610007987EFBC783B6D279B3C252CEF5A9C43F8
+:10A62000FBA3E6DBC4FDEECB6074DE2DF138B2A4F3
+:10A63000C37BB222E44106F38F4E9737CA90EF12E4
+:10A640007C8FA0DE2DE88EAEEFB0A1889DB380DFB9
+:10A65000B1A8243ADF403CF77C6F39BC5F73CC8EE5
+:10A6600070A91BB1B100F6B16EBCF489A12064D70A
+:10A67000D46DF812FBA9909F6B82F72F9D60AEF00E
+:10A68000E19DD44EB187FB2B038B802EAF65FF88F5
+:10A69000799F6CF4213E7DDC7818CB77C7BE5502DC
+:10A6A0007A46A0D11FD52FF95DFD03C22F20FC04EF
+:10A6B000820F88FBF93A32385F304A7DF15E352DE2
+:10A6C0002B05BFDC1FC95F0F655C5D5F51B67FCF97
+:10A6D000FCF59BE2794D2A938B6AFC56E3B5C06783
+:10A6E000B8FF1B7EBFE016AAEF815C9D4F3CF93599
+:10A6F00094CFCE5DD1AC1B257D77BC5E653A93458A
+:10A70000A29C37F9F6FCDC8EEB97CB65B40F447E48
+:10A7100082D887AF3222F4F87F5E432EFEF33F29C2
+:10A720001723E5DA9945DF4DAE11853E909A1981E0
+:10A73000AF199957C75765FBF7BCEEB073308B6400
+:10A740004DE8DC07E40F831ED7ED65E71AAB739A7B
+:10A75000F1DE79322218077AE3CABD32E221D13A1A
+:10A76000B56961F74E7512DF1F001F578C5E81E7D8
+:10A77000E122EE8B32B5E1F938F5BD51225FB89692
+:10A78000F7A3BE3FAA96E709D7AAF2764A33797EA5
+:10A7900070112962F9154ABD545D763512855FB294
+:10A7A000EB4A23FA01263FF6D2CF3DA343FB707359
+:10A7B0006604BECECCBC3ABE2ADBFFC3F82A9B9F00
+:10A7C000C47351DF165F0D766735CC5BF0E1059001
+:10A7D000C345C75DF0AAC10BBF0F20EEC9EE96D8E6
+:10A7E000BD34DD9F10F41B5DEB9EE591C7DC78AEB8
+:10A7F00073F8DB4E99E511B07C03A1A708BD655441
+:10A80000675066F7E1F3F3503C2FE89BF22F87DFA8
+:10A81000827A8EF0BFFDBBFCD642CEED35DA919E3A
+:10A82000857FB038E0423DAE4BE72B817BED3D7B31
+:10A8300062A2EA013B323557BDCFF51F66F70E80A5
+:10A84000FB4CCEDFC5BDAE1532BBF7F9925F46FFBC
+:10A850005DC34FDEFFED23F66BDBF575964B51EDD7
+:10A860002251D669D87989A2723BE6ED81BD04FEFA
+:10A870003BE1CF53BF7F30BBEC59985F853C1AEF6B
+:10A88000D9BCB49DCDA7B77DA9DB10C4F17B6DE722
+:10A89000E3D7ED2DB184DF8BD199D9639F59CE1ABF
+:10A8A00043FBFA4DF77F4C70AE42BFF97FDD6E98E7
+:10A8B0002E53D591CAC77CC9CBF453C2F4D405C476
+:10A8C0008FE52212C4D24D583EFD12E2C0721971BA
+:10A8D000613927DB1DC8C4FC966032E643BEFC8F9D
+:10A8E000C1803717C78E6A86DCB9EF4B4FEB2EB4A9
+:10A8F000E3F8DD2FFD230BF25AAE794F7E9CF38BEC
+:10A90000CC28F1E4FF2995317E428AD721BFAFE4FC
+:10A91000B72590F12C2E767F720EE24388FFA5B406
+:10A9200008FE07F1D6FC4F342C3F64A584F7BAB675
+:10A930000734485AF9CB73BC704F4F7B1B6BCF5F0A
+:10A9400063F54AB49E3F3286B5AFB57AE1DCC342C7
+:10A9500012407A5C0CA71E643807C3F89BB8079DA9
+:10A960006AECB9A0672DEF30B2FC7D12E80F7CBC19
+:10A97000A017FBE6E62CA6EF0FC9657C7B4899D2B1
+:10A980000F61E3ED0DD965F559B4FC719633398B40
+:10A990002E7548827FEB2F8AD12F8FBFCBF2D9C87B
+:10A9A000DB307E28BE7B24BBAC2FBCFFBCC4F2CD09
+:10A9B0003D7BF9EF17906072F8BDA273B2CB73A024
+:10A9C000BF415984DF531F1DAEF0FB75AE28F69CC6
+:10A9D000C8671C023615FAC3D9FD54CF4BAC3E32C2
+:10A9E0002BF9E64D26F4E17B40AF7D24DB5D84F35B
+:10A9F000D7136282F93F66F0EE44FDB33E0BFC9143
+:10AA00002B1E3768402FF8908A553857F251A31102
+:10AA1000CB53D4CE85F24FD4CE85F2136AE742F9F8
+:10AA200029B573A15C7ED9419186906359CE29598D
+:10AA3000B650BC4D3DDFF1598CAFF68CBF578FE35C
+:10AA40003764BB11BE3DFBBD8778211EF2BC359833
+:10AA50009E70157CEB9DCF30B888F89FBAFD463EBE
+:10AA60008F82362DCAF182F6405C55D87BF3B2D87E
+:10AA7000EFA9E5BF7406CF8976597AE0EB94E892A6
+:10AA8000A76B587D5ED660846F43B6B31ED64DE982
+:10AA90007B219405EDEFDF07E77968FF9847D02D1C
+:10AAA000051F443D5FB50E351CC4BA9EB7FAB7C248
+:10AAB000F7CFBF940B2BA1FC8630BA013C92A2AD1C
+:10AAC0007723CEF76643B018CEA9DCFCB51C356FF2
+:10AAD000B821BB14E16C12F826E0C4F7EBBBD275C9
+:10AAE0004F3C9BE32911F76C00EFB4831CBA1207AB
+:10AAF0007A5D258FD7B7B7F57F17D6E7392C930145
+:10AB000076C45F05DD3DC1F74794F97BF52ED8A7E4
+:10AB1000E7F79EED0FF7B0D27DE90FF7B2FE226B9B
+:10AB200000B68BEFF2477EF5F02F92F07DFCDDD082
+:10AB300079A4A502F249E61BF71D84252DB47C52A9
+:10AB400001F9248B53A54350DE6ACF990079242262
+:10AB5000DF7DE9A0D243404A531D95A88F9502732B
+:10AB6000099307E5C6587E29B4903F898AFAC4D470
+:10AB7000BE8AF727DBFB29DAA70CBA41D12EC69D86
+:10AB8000EA18AA786F48423017EC2FBA0E760FF603
+:10AB90005332E6DDE5BF74ECA61B687DFAD3B3F152
+:10ABA000DEBFE779FBF417CAF1F708BB293CF5547F
+:10ABB000913A37E2AE077F019DA9F4FB9ABD4F1C85
+:10ABC00072DAAFA2DF5F43AF17FC757587B104F887
+:10ABD000EB37D5F3D5FBE2CB52EAFDBDE14B0F3DA0
+:10ABE0004876862FFCDE2D35BE107227C73F564EA5
+:10ABF0003FCACE817D5B3EF667E06361E7307B4A0A
+:10AC000095BF6D88DEF1EE7AF0BFBF23133C57C7C6
+:10AC1000CFE755C1FFCB213C27CB5A7E0AF74AD15B
+:10AC2000E71ED03FE11CA893F67F398BEB4D35FB37
+:10AC30007E9A561C6A270D9F28DE2777489B15F5BC
+:10AC40004D39CAFADDA59BC3BFEF8D1F566DBF55A9
+:10AC5000EFC6F39B52D4DF7F15F3A9D81F83F97990
+:10AC6000D320EF843EAA2D7E4F0BF1D569BDC84F8E
+:10AC7000C177E6C9A43E5ABB9CCDFA9DBA3F06F304
+:10AC800059BE6DBF1F525862BEE0EF98FCFC30DE2B
+:10AC9000AF0DDFF7B86C89DF7B70EF4FFE0671CF29
+:10ACA0003D04F3372F5A19DF2F68FB4CA301F9D766
+:10ACB00087E14B8125A00179D25D1DEB81FCFCBAB7
+:10ACC0009566CCEB1C921BFC83B190A2FA2FEFB9D6
+:10ACD000C748F7ED8F7098314C9E76838D43EBD942
+:10ACE000D9F720BF9FB23FC6A7F90EEBC9A63A1409
+:10ACF000EA1B658CBE1701DE70B902BEF3BA9F92E3
+:10AD00001E3903FC00D60FF5D9BFBCEFDDFB41FFB8
+:10AD10003EC2E81B32E5D476FBFC30BB9D3CCAE862
+:10AD2000D248FF813EB7EA40B31EECB96BD3772B14
+:10AD3000E6CD7C53BA1E99CD7FB7A3773A3E3A85CC
+:10AD4000EE4BDD1E76CFC4A58E0178AEB537F95D2A
+:10AD5000B75D83F427EA5D1DF224C057F539710110
+:10AD60004F62C953DCE7B46ECCDF67809C5CB75799
+:10AD7000CB923D7A1B678B86D8C3C679FE354335A7
+:10AD8000FB5D4B36FF6E219FF7FE35A174302B37EC
+:10AD9000469173542EEB92402E57B2DF5D38BE378A
+:10ADA000A50CE07F5C223E3B9EBB6279C63359779F
+:10ADB000F0DC84F788A40ED286DF7728ECC8D97B34
+:10ADC000670F003DF20F6D4B8E3B813D64F7C3F181
+:10ADD000E6100FEABDC7ADAE4CF0374CE7F1FEE32D
+:10ADE000D66027F0E3E363622588DFD3FE3791B0B6
+:10ADF0007BFB8EEB5C99EC3E0891577CFD77BABFEC
+:10AE0000AD42BEA3740AC4AB17100BD89137CB4C1C
+:10AE1000AF25AF33BA14FCAE4EF227C03CE764CF87
+:10AE2000F8EF6C3AEF940D3F47BBB2076E5AFEBB8A
+:10AE30004FDF50AFEDB15F7749EC9E1207D3F76B50
+:10AE4000475F78600E9C73A376B644E7B3A47D1F7A
+:10AE5000DEC7A3B6AB7BEC9BFFA57F34D23E726D01
+:10AE600087F509BFB7DA4EEAD1CB857EF714CB73ED
+:10AE70007F63CC435DAB69BDE1A95884E3F9C70D9D
+:10AE80001EE0DFE7771AD0DE399F103CB91EEA2FAB
+:10AE9000E43B3C385A1E9EEF12F8BD4263FF00E4CB
+:10AEA0000EF9BD0EEFDDF8EC3103FECEC7CA27AEBA
+:10AEB000DB09F6D36799F6679F03FFDEB336BC0F55
+:10AEC00080A4B2EFA7717A04FAB2D3FD907F6546F1
+:10AED000BD61E58B69C8BFC4FE9D7B2C06CFC19FB9
+:10AEE0003F3C331EFC609D9ADDEC7729659307F8A3
+:10AEF000F0EA9D31A8F711BDFB15587FF9AFA6CD3B
+:10AF0000190AE3BF6F23B09EEE8E17D1FF18DADF68
+:10AF1000E872FD52473FC6077AE42CCB9B5D1CBA12
+:10AF2000AFD907FDAF21E23E4496375B244BEC7767
+:10AF30002AB7453F07FE5E36B3D76A84BF2491180F
+:10AF400053810EDD84DDFFB86D20DEB77B3E3B41D3
+:10AF5000D0313FEF28F0ED64EDABE82F31B07CBD90
+:10AF60005EEEB73C95CDCE055719BF54F84D6A3704
+:10AF70005C56D607B3DF6D2E6AB20F5D4BCBF51C66
+:10AF8000CE9A5457209B7EBFAAF5DE97DF46B83C89
+:10AF9000FAA33FC2B8874DE8A7216F33F8A9ED9710
+:10AFA0002A6390C71D5A147AEFD91D1F60FEC8D9B5
+:10AFB000976EC0DF2B5B22FBCFC23D595D66FFC79A
+:10AFC000B7D3F285C347715FD4F38D88C34B8CAF81
+:10AFD000D4C03A8642FE8AEB6FD948B78CDE4F6FF9
+:10AFE000CD47F8093F6DF7F9E8F69598A7E85FCCEB
+:10AFF0004FF42FDED3DA997EFF7F0189AF015A002B
+:10B00000800000001F8B080000000000000BAD58FE
+:10B01000096C14E7157EFFCCEEEC18AFD7EB031FDD
+:10B02000F1C1EC1A8C898D3DF8AAB1A12C36A60489
+:10B03000A17639225CCA3169C25188E3950D154A5F
+:10B040009118675B2E11C555AB88B469BBA1224529
+:10B050002D515C07901B61BA0435E0364D17052968
+:10B0600034B5E8D46DA8D5D8D8A569232424F7BD74
+:10B070007F66588F316D137557F6F3FB8FF7BFF767
+:10B08000BDEBFF3D26252A332B007E56A400D401BC
+:10B090004CD26719C0982F5199E1A5713F1F1FCB62
+:10B0A000441ED701E800B301DAE8CF6AA432B8B38E
+:10B0B000B391B631350A7C5C874C4EE31ACE3F9D86
+:10B0C000F726B86A683184E51C80C7C1FA6467B99D
+:10B0D000A01E6003FD8D473FDEF09BBBCC07B0098F
+:10B0E0007ADD50027043E8DE278900A3BDDF716B73
+:10B0F0005E5AB4C27FAB0C80E91F0893E5493DA7B7
+:10B10000530017D03AFA4C8A497DF566288BA09CEB
+:10B1100031BF5717AA00E629CC754BC6E92228A2F1
+:10B120007538AFC66B91F679D428EAB34F082F5023
+:10B13000D0EEA7A5782588C97DFB048D8F8FB277C7
+:10B140007640908E8B5786D300C6332460E94867DB
+:10B15000AB8910E2A1FF13D4532867DC0D6D7D7815
+:10B160006E6D8B10E9E376B8860DD44F00C6F5AB53
+:10B170002DC771C475298DCB96DE011CAF72AE4F01
+:10B18000DAE3E42F2902B7AF364B88F4563C88C780
+:10B19000269A477DA310170957FC6C9011F7260BD0
+:10B1A00077809008E897672CFE19D91B172B516FF1
+:10B1B0009FAC8B684FD305F40BF24DAEF825A22C53
+:10B1C00004B01FFD0BFDEED1FB7A100E79E52E9237
+:10B1D000D368B997A1ACCDB8EE108B009D2B430F6F
+:10B1E000A7C75882EBF17998E034047E1751849F09
+:10B1F000D31510E6742544385D053D9CAE865E4E41
+:10B20000D740825378341E85009D74C07F2B15C9AA
+:10B21000633B8549A4B51B21D2EB7D108703164EF5
+:10B220000FC74167148F9F168795A0E57179D3F1F9
+:10B23000282CE3F13D1D0F0FC523FA2D056279443B
+:10B24000978221125D46818B729683E222BE05426F
+:10B250009C6FFD1F71683034975631031E2D33C724
+:10B26000C5B72C3C66118675493FF52B661DB0FDB0
+:10B2700005A86778E1837EB4C76B539BFFA1608903
+:10B280008829ABC2AEC5C8D734779520FFF3D8461E
+:10B29000936F6A7E2388FC1BCA97C3AE7C8AEBE659
+:10B2A0001AB70AD0CD36855720AFA5F82AA18A0A49
+:10B2B00047A940F1B3D76FE2AF75EF53FD98475AF6
+:10B2C000915725FB640F6286F889252234202D5E74
+:10B2D000157FCB8DEB5648DAF7291FDBE5B84F41D8
+:10B2E000DCF776B7E602DA7B5832D77B709F5C9D3D
+:10B2F000B40BC7F514E4FBFACABB58F0E1E7A3DCD2
+:10B30000D32457EB9EA703E9718EA9A6279B73DB75
+:10B31000B04E8C26DC704C499E7332577B4D413CBD
+:10B32000412E05F27B816CCA19ED2B2F27BFF42B20
+:10B33000661D85EC400DE136911BEEA7F5E36966CD
+:10B340007CF5530CCE7E383594D0796586F1F10FBB
+:10B350005101DC3FA8681768BE23F55E29D5A5DB3F
+:10B360008BDE3B64049271CAF0FCCD687734043103
+:10B3700089D79125FE5B5847017D3089FE1CDF8E01
+:10B38000721087DAB01675E3F0E7364FD463912276
+:10B39000B957B85CC9285E84FBBEBBFEA664C6591B
+:10B3A000A11967561D1AB838F88D02930DC394BCC5
+:10B3B000EAB878F75F7F40FC3AEE78555A9ECCA702
+:10B3C00097BAC0478BBC8EBA61E75963BF272EFA84
+:10B3D000885FB09DD62D7D6FA884EC5A366444D327
+:10B3E00048CEC0FB05A61E565F087DC23E4B5F6877
+:10B3F00015A93803749E13631EC4AB93452EA71181
+:10B40000FF1A5375D4FFAF32C6473AAD0F79F3D167
+:10B41000AE5D965DED83A70EA521DDF5F2936BA0E1
+:10B4200092D2C1CDEBB7825FCAFF3DA7DDC97ACE0C
+:10B430007FA323D0CE0EB03F7189E2A0BDD7B9AEB5
+:10B44000038EFF9DEA4EC7D43A8F7A7DA2A465731E
+:10B450007F59FD0AA885A0BC9DD65EB2C34B7A0F6A
+:10B4600048310F43FA832ED54FBC953F70E3391E08
+:10B4700097F67A78398BFBDECEA7AF1D41DDB3920C
+:10B480007855BDEA0911EE55AFE686C8BE2A09B661
+:10B490008539DE311EC755181B0CE3E9F58C89A0F0
+:10B4A00080E7BC3E50A6620585370F86E0CF7393D8
+:10B4B000FA755AF9D42A9E6991300EEE3C057E4CFD
+:10B4C00049E81CFC715446BEF328D00AB843BF506B
+:10B4D000CE9D112146721A076BF2C8DF67ADFCF4EE
+:10B4E000E409A04CC1294599054A5992B7F1F5588C
+:10B4F000FE492DCB74CCA7A98F38F6A737049DFB46
+:10B50000F550A2A29EEAB1B93F23F4A863FD61DF22
+:10B51000CAAB14974B133BD6102E59ABAA1DF3F5AB
+:10B5200020F3FB435DA1578DE17EF8D8ECE70DF8E1
+:10B53000E5FD002222D9D764007C0FFDD138EA72E4
+:10B54000F83DC5C078C47529D7A7F81D7F3C8A93FC
+:10B550006F08601C50221542E1D43848E2ECBD8FE0
+:10B56000238F83415C4438A74931BC723C80533DF2
+:10B57000CC4DA7F9BAAB22C438EE5D6A1CC7678709
+:10B580009D78E7B639F1CED79CF816EC72E25B14E1
+:10B5900071E23B67BF13CF80EEC4AFE448A363FD05
+:10B5A000BC9E66073FFFC46AC7FA05B1750EBEFCB4
+:10B5B000F426C7FA85BD5F75CC57F5EF76CCDB7105
+:10B5C00035DDEF8BE29D8E75D3FD5E73F559875C9B
+:10B5D000DBCF3A7EFF9F7EDE37CDCFDDA81BD5AB1C
+:10B5E000777D23C7290DBF986AD6A5567149224495
+:10B5F000FE5EE256C9A7BF53B25AD228DFAD3E1451
+:10B60000B6FA101C3864F2569CA809F532D5D1EA76
+:10B610001BE1161FF2B546E43295E3FA919E96744B
+:10B62000858789E2C73861162E5F6A60E072E40B95
+:10B63000F23949DCD6EBDD623A2E6EBA178BF27224
+:10B64000494185E7ADB3E6598359D7D78652C0350E
+:10B65000058FA5D63850D346794BCC29586FBD07F6
+:10B66000F05E0E12DDCB0539160DCC749F544F8859
+:10B67000FC9EA4F17BD315A6B9896E9013C5D4BFE7
+:10B680007E92A3FD2880F5EAB6A02AFC9EC58C28F0
+:10B6900019354E8651D3D1AF87435EBABFE3DF8FF2
+:10B6A00060DD7DEE5A58AFE0EAFB0DD45FB3F439AC
+:10B6B00013D04E0710FF61E63F54837BDF6DFCA87B
+:10B6C00098FA8F474424B00E66F9423FA579FDF001
+:10B6D000920C5EA773D13EACA386A0F0FB83FE2C38
+:10B6E000E3EF818F48D8E229797AC4CDFB0E58EF79
+:10B6F000A32D165EF6FB68B375FE308AD885757A81
+:10B700004BFF158ECB9EBC517065F178E3F7A427F3
+:10B710000BBDD5C7C8A6508DBA6E218DDBEFA50233
+:10B72000F1D3F4C556B122DD98E1BE68D33D79234B
+:10B73000FC3D777FFF19B38F3C5CBECEE33669B723
+:10B74000297FF8682AEF2FC3478B9A8926E5DFE621
+:10B75000F2B744AE39E264DBFEDF3BE2EF09FD4FB6
+:10B760008E79237BC25D80F61BE7F3577E05F11BC4
+:10B770003BE7A9A77723FAED8FE4175BBEF1FCFC4A
+:10B780001574DE7FB7F36F1CDFA1830970CD4DDA2E
+:10B7900079F3E00DCE1B070D4EA7DB69BF336D2A91
+:10B7A000BD05652EF4CF049BA59E0C3C78CECEA0A3
+:10B7B000F93E1B5A9ED34C7D76A8487299B4D4E4C6
+:10B7C000F31B64935FB98AE8B8DB7B84DE99430C92
+:10B7D000420CE361330BFFF009B4BB3B47BB477638
+:10B7E00076EC9EA874613E7454195B19FA333F439A
+:10B7F0009BA47186D7BBFC4CAE6729DD3B4604BDDC
+:10B8000092612D587CB2702DDDD34766E9B7A9133C
+:10B810002F0AE6ADA57BFA8864E6C7F293C25A1DEB
+:10B82000ED58ECD7528228E74326C6793CFF82C503
+:10B830004EF17833A475693C9FDAE8DD45EF5D7A17
+:10B840006F8CA798D41F64DCBE0CA2B393B49C6A1F
+:10B85000258E2FB768AB78BC94D1FDE08407281FF4
+:10B86000F09C9040E70C7862A790CF41DDE99EF212
+:10B870002BC9BCCF57FFD213A7BAB143FE98FB69BF
+:10B880006E30C0E5649760E5C27DD92F786251D2F1
+:10B89000CF4814AF45FD7ADC787FA1F7F4759CC7DB
+:10B8A000BC1B7B7EFEC96353FC313768BE87E02931
+:10B8B00000733EF7159A6F1F1CBE4975E4B701ADC2
+:10B8C0008CEC1F16947AAA23EDBE4B12D59FC6A00E
+:10B8D000C2F7A1BEDC7EAC07DF641C67D9FF178C02
+:10B8E000D76D586CD2E9FD26682AED6F970D89E473
+:10B8F0006144F0FBDFC3EC1FDB9E78B102E9ED345D
+:10B90000B598CEB1CF453D1A498E6DB7AD4752CEF1
+:10B910007F8EEB1DF284237F6FBD74B894F264C8F0
+:10B920006DDEEF10678DECA816D9B675C87FC1C261
+:10B93000C55EBFD5F2A790177E2C887477E4DBE74D
+:10B94000DF5192F3E3ACE7EB1F90DF06BDBCDE4DA9
+:10B950003FDFDE3FDDDEF68B831C17B4772BD93952
+:10B96000C5DE8D748E6DEFD8C0FB2F56289FDDCEBF
+:10B97000F1A2844472C75FB95BACE0FEF60B576E70
+:10B98000501CB55BEF7D38EB7CC77B66E17B317388
+:10B990004A5DA75A37874FB3A9F7288FBDBFD0E5B7
+:10B9A000DC8F176601CF3B6BBD23FA297F67786F69
+:10B9B0009E4D08BC659ECDC37B1AF503ECBF54FFBA
+:10B9C000EDFEBBF79AC0E3726F00F83CE94579C021
+:10B9D0008CB7793FB0FF9F1065D8E7301E3A25ED50
+:10B9E00020C509685DBC3F8873BC2AC573DFAF57AB
+:10B9F0005BEF26B3DFD459FDA58EE490FE15E9BCBC
+:10BA0000EFD45AE7D6CB789F0952E9D6ADFF9B58C1
+:10BA1000FF5F38FA367F6FFD1B3AD0569240140014
+:10BA200000000000000000001F8B08000000000064
+:10BA3000000BFB51CFC0F0038AEFCA3330C42B3167
+:10BA400030742B33307C03E20E79841CADB02A07AE
+:10BA500065FA5F303230BC02E23740FC8E9174FDF3
+:10BA60006AC208F6525E06067520BF02482B0A30ED
+:10BA700030B001D91A40BC0BC8BF05C4CF80D84133
+:10BA80008881819D8F81C110888580581328EF0996
+:10BA9000A43FF161375F4B18BFFD8F0550F9A282BB
+:10BAA000A8FC3FFCF8F5B709E2971717223D4CDEDA
+:10BAB000AB911F1FC6EAB44F33D4C4371950F91FD6
+:10BAC00065181898E51818DCE421FC6B48F2114061
+:10BAD000B14F3210F66D3160DC01D55D66C06EEE9F
+:10BAE0001DA0FC13A07C0AD41C0004EB50106803BA
+:10BAF00000000000000000001F8B08000000000094
+:10BB0000000BE57D09785445B670DDBEF7F696DE8C
+:10BB10004216C2163A2C0A08D86C21084A67C3A0FC
+:10BB2000019A454407B5598410C822E27C3CC77984
+:10BB3000345B061DE64D147518079C06C380F35050
+:10BB400003460D1A980682A3CF2DB8208E336F9A24
+:10BB50007D3190002EAD83E3AB73AA2A7D6FA79B46
+:10BB6000E08CFFFBE7FBFF2016756B3F75B63AE7ED
+:10BB70005445359808194BC877F043D32512212432
+:10BB80002D9AD29FBF7F974EC82433FD974C48A172
+:10BB90006C23643821136D2468A275268EA11F536F
+:10BBA0000979B7460ACAD086D60B6413524AD8CF51
+:10BBB0002485D44BD7137231E7C5AA216E4224AF36
+:10BBC000972C1D4A53B78BCC8474CCDEAF2507214C
+:10BBD000CE1C0321FD589BEFE8DF64AF15FB12F983
+:10BBE00094A24EBA7C9AAFABAE7EE719BD74E55D08
+:10BBF000FC0374E5DD4A86EAF23D2A6FD0D5EFB941
+:10BC0000344F97CF0ADCA2ABDF7BCD145DBE6FF55E
+:10BC10009DBAFAD7AE9FAD2BEF1F2CD5955FB76DB0
+:10BC2000B12E3FA8F6415DFDEBEB57E8CA87841EB5
+:10BC3000D1950F7BE3315D7E44D353BAFA230F6F66
+:10BC4000D6958F0AFF5E573EFAF44E5DFEC6D65774
+:10BC500075F5C746F6E9F2B9E42D5DFD7CF307BA48
+:10BC60007CA1EB535DFD9B338EE9CAC7BB3FD395E7
+:10BC70000B3CB8B5DF25DDF7099EBFE9DA29C447DB
+:10BC8000814D889154626A26D5985A492DA636D29C
+:10BC900084E9864CFF9D64046DF074A08A50BC5BFF
+:10BCA0001968FDEF149ABE9BD3DBE91F08BD790923
+:10BCB000A1783B91754D269A6D2199E299C94C0264
+:10BCC000168A0A8E08C5B7148A771182A92B42F109
+:10BCD0006D18C5BB8819D34E914EF83D25E2C2348C
+:10BCE00035D215BFA74532304D8FF4C2B473C48D21
+:10BCF00069466400A65D22FD30ED1A198AEDBA4549
+:10BD00003C98768FDC80DF7B447230CD8CE4E1F7A9
+:10BD10009E112FA6EEC82D9866458A30ED159982A2
+:10BD2000F57A477C98F689DC89DFFB4666607A4DB8
+:10BD30006436A6D746FC98F68B9462DA3F5282E9C5
+:10BD400080C8626C775DA412D3819107F1FBA0C813
+:10BD5000524C074756607A7D2480A927F208D61BEB
+:10BD6000125983E9D0C863F87D58A41AD3E191A78A
+:10BD7000F0FB88C87A4CB3239B311D1909629A13D2
+:10BD8000F93DA6A322DB30BD21B213DB8D8ED46238
+:10BD90003A26F22A7EBF31528FE94D806F29807793
+:10BDA000214CBD91FFC2EFB9913730CD8BBC8FDFF5
+:10BDB000F3234D981644FE84DF0B2387311D17397A
+:10BDC0008AE9CD9130A64591B3988E8F9CC6F496A2
+:10BDD000C8456C776BA415D3E2C837F87D4224823E
+:10BDE000A9E07724476D0E0BFCEB05FF9FE93A793C
+:10BDF0001DE54BC46FF88EA6C446F16054B47E6C4A
+:10BE00004AB91DF24995E25512C5EF64CA0B811F6C
+:10BE10004EAC9482376751FC480D37425ECD31B944
+:10BE20004D347F176955017FFF42C276E0A77B47FB
+:10BE30009DEA1EA6F8FA6E5AA807456EF8417EAB39
+:10BE4000C29C7A03BF6D56C2F4FBC4D47D697E1BCD
+:10BE5000B4A7B43114D09B8E0FF84DD111FAB94B61
+:10BE60002101079DEA41E86114D60B99687E66318D
+:10BE7000F10EA5F5AB46996604E93855437D253E9C
+:10BE80009AFE22CB3703D2FF02E2A1F3DFCFD383A6
+:10BE9000C480E98B9914EF297DCDBCAF2FA3A702F5
+:10BEA0000AC42E1DC36174BA8BC90D5B6BA66FD01B
+:10BEB000D5B753081B4FD47F96F83E82EF813CD212
+:10BEC000AFD216AD47BF1F867A71BE7F1AEF7BBD1A
+:10BED0008132020AFF402763700BC827E2764E8644
+:10BEE0007999DDCE29F6C4F3FAD932D740A58F76F9
+:10BEF0009E419CDFCF2432A396F1978C2983B07F9B
+:10BF0000948701AB05FB9739FC45BBCF019EB4DD9F
+:10BF1000FB165F0B93A7EEEE08179BEBAAE042DB44
+:10BF20007D897051683BFBD5B74B9C56333813AFB6
+:10BF30001BE7C1BF57984840A2EB68DD620F6ECE89
+:10BF4000021C7623FF2C7171069A4A8141E57A49D9
+:10BF5000322C8190C63D492103AD9FB7C5BE19F46F
+:10BF60008096BCC0933E80F366956CA15556ECF963
+:10BF7000F9A1DFD07CDE2695500D832C487A229BD8
+:10BF800050B85D2B496CFC80776F1FDABF9F881F0C
+:10BF9000AF04FDCF27ACFF1689D151608B13E17A36
+:10BFA000BAA0A66A344DC3BBCB8A09E5E3A72858DB
+:10BFB000BB50FC5E60250AA494831B113E01F578FA
+:10BFC00058C817A467259A97DBE7E7435ED03F5D23
+:10BFD000F782A01ACDD3BF0BB7E9F31A78E1BEB749
+:10BFE0005AD4E066C4AB6E0C3E025EDE6E0C7E1C64
+:10BFF0005E0516356048457805810F382537C2A1A2
+:10C00000C4A28664DA4F0985239060C9EE87D30104
+:10C010004E0BB7595CC735E396D526EBF215F55DA7
+:10C020005CC73572F4E21BCF38804E1767185CC7C7
+:10C03000297F6B5EE64D394EB7ECFCB2224C057E93
+:10C0400094D566B96CBA7EF4F98BD55211C36FB72B
+:10C0500073DAA0C478B638C3E83A4E49F5EC362610
+:10C060006FCF2E33BB609CE6652E171B3703530141
+:10C07000AF454BAD585FCC2F51BF3FF4FC08A9230F
+:10C08000C7CCC0CF6959EFC4F513D293F2B911E907
+:10C09000A441FD12F0C64CFF7E67403CC2BCE8B72D
+:10C0A000A2560E98AE87EFDB75E3D176EE931AF9C0
+:10C0B00092986E1572528397F7430748A766DC671C
+:10C0C0003FEDD149FB6B516C6B408F9AC0F1A702D9
+:10C0D000EA517E50660E1BFDF4D3B93AB61F89C6ED
+:10C0E00039BB6C5B37E06B25E66A2330AB92DAFE36
+:10C0F00005404FE7EA56A6837C59285FFCB12F4ED6
+:10C10000FB5F08BA0DAAAD7A7919E4F3A4FDEAE859
+:10C110008CD8DAD64DF3CD063A94AD7DBFBF929858
+:10C12000DC29DF7E70DC683AFFF2FA0B4698C70420
+:10C13000C9FF2B292DBA7E09D64FFB29DD76C4080D
+:10C14000EB3BAD06AEF949D615E0D96E9EB68C93A1
+:10C15000499AF905A82249E975760EA757E2BEFD6E
+:10C16000534A9F67DE52C923741EE432AD45CB3378
+:10C1700079E95CE27300BC66D72D44FE7306F80FC4
+:10C18000C861529D0DF8718E188A607DE7C8FB8EDC
+:10C19000611AF8ED938C1C3E5495A5FCC084432194
+:10C1A000DCBA00BF32955435C983E1BB12E07C494B
+:10C1B000FA0EF94950427E56C2BE07887939AE63FD
+:10C1C0000DE34701FA07F2F756EBF9D3FCF5FAFC59
+:10C1D0003C32255DA1FC65DEE32AED91F2372DFFAF
+:10C1E000A3F07B566272773EA9AC72D1F96F34D25C
+:10C1F0007DA2F39FED224A37BABEB2573666CFA270
+:10C20000F9372526C7CE2EA3D3BF86F6D389ADBF77
+:10C210007469D0E81DD87E7DC7EA864D1F4DB03FBA
+:10C22000261F4B85FC256E251BB925557213AFBF04
+:10C230005B9DECB538A01EFDAEE1CF73D6E8D7D735
+:10C24000D1FA63D74BC863886FA5DB2613C033B11F
+:10C250001EB15F623DEA36C91B8C4307618EAF8217
+:10C26000AFB572F809BDE38B98FC3731F9EF62F294
+:10C2700002BF554EDF14EFBF9046003DB78E637886
+:10C280001236B2F30CAB678CD6FBE64AF54C9C5EDB
+:10C2900068BDEFAE54CF12ED4F31A4B5AF57F6CA1B
+:10C2A000732F07287E97BEF08483507C3CA354A74D
+:10C2B0007BE8F7455B563B004EA7958003F0E64CC4
+:10C2C000502E8A07AF510649E81B3689EE7BB9C06C
+:10C2D000FF31CB27827CFF728BEA7A84EE4BC53626
+:10C2E00053C844F7BBBC6E4131198CF9232CFFB302
+:10C2F0000B801F15F5EA51EDBE966E7D22DD6DC7F0
+:10C300007DE866001D9884BA119A96D79C18077A22
+:10C31000740569457C8E6D07E3C3D18EF2EB5946F7
+:10C3200067FB72716EAC609F4845DDCF2FC0B9B11D
+:10C33000822847B5785402B84CF5BC01067B2A9C8C
+:10C3400017C8483212F88A800309A6215F5EF9EC0B
+:10C35000AF061FA1F368AE79CB2169E04335248491
+:10C36000CBC5DA397F4DB9825C384FF1935CA36D50
+:10C3700017C476EE7A3A81CE34DBC0D2456AC83132
+:10C380009AC273D126D54331932C7AEE99DF3D457D
+:10C39000E98E7C62F2F4A5F05EF8DC814337D0FCD4
+:10C3A000C21D6A6A315B864D4A8FEE4705FD0B76EA
+:10C3B0001901FFD2170F18DD83D8F7873A45F761C7
+:10C3C000E18EBD4632A83DDCF26BF71AC3B638FBEE
+:10C3D000517B641CE8332B9FFDCA08FB7D668F44AC
+:10C3E0003A67B56F5FB2E900EA2F0027DC3FBE3F36
+:10C3F0006DFBD56E9F42135F1D8EF55CC0AF13EDD4
+:10C40000931D64F508C4E3E75FA5E397FCC9E481E5
+:10C41000F5973C7FBF03D6714AA964F8BC7175BA21
+:10C42000978E5BA206D25D98B2EF254F3F8078369B
+:10C43000FFE003A89751FCE862409911E802EBBBCA
+:10C4400077C36DB8BE79C48FF856B251F605810F27
+:10C4500028A468471C7A7881D3C3A9CD9453D2F518
+:10C460009D02FE087AEEFB32E78FF7A11EF9005F0E
+:10C470002BD56430FF8599ED5395C120EC72661D74
+:10C480009ED6FC0CF9E8D91EDECEAE810807C13776
+:10C49000919FCA070B3BB3FD61FC17DB51BCCB87F7
+:10C4A000EF50BF49F55A06EBDA717EC9C65FC2C7C5
+:10C4B000A7F3B682FE712A9DC989D8F5FDC920F877
+:10C4C0002395AF1AFCD2D035A3F39A87195D0B3AA6
+:10C4D0000F4E2E82F2CF3F64F403ED40FED07985FB
+:10C4E0003A63F9DE6912F2011309C5A3E71A95D37D
+:10C4F000B3BE9C7268D4DFE8BC15C9A9C513DA7F46
+:10C5000027843FEA25F31EA7ED34FA74058C87F5DE
+:10C510008CD1EF5951BA9DCFE9FFF740FF4951FA4D
+:10C52000271BD2AEEA7CB6480DFEEE29A0574A9FE3
+:10C530000137D0ABEA83757FB67DFFA13B295E7FD3
+:10C54000562BE854CF3763E9B464E70304F033961D
+:10C550004E3FEB5E49E2D229FD1E974EBB87FF5747
+:10C56000F8A680DBC118B8513EF8DB57DD89E1172A
+:10C57000CB072B0CEEB87C90FE7C48B2DBE39DC071
+:10C58000378167A5FF59D613F84D1B3E0A7C6BC354
+:10C5900047816FB1EBD4C32DB67C03F01B8D7EA019
+:10C5A000AE20013BDDE7D6DD329E135BDCAD8E4E67
+:10C5B00074DCD516720FE8D92D2E9E4F66F9D6344D
+:10C5C0006315F005F1BDD54266007EB6F85A1DC967
+:10C5D0001AFDF94883EC70D3F2709014C5D3AB29DF
+:10C5E000C7C5F1C32451F972845FA16CCB5C3A1CBE
+:10C5F000CE55B20774B7B9CB6F7780C9A2A5A1F7A2
+:10C60000A419F4FBBD6FCA68D368B13A06C3BCE88D
+:10C61000B95DE942E13B87EFF3691278720C5DD7AF
+:10C620009C06A617CF5DAB87C73CDB1223F019AA87
+:10C630007F46F140832FC24F50B2415F5E4AD6E23F
+:10C640007E95C6E08F9F9F77BAC81C7F869021FC9D
+:10C65000BC6180FE16733E55280F9C3483C2BDE535
+:10C660000D999868FE62834CAA609DDBA520013A73
+:10C670000EA4211E9653FE4034E7C266C0336362A7
+:10C68000FA6D7EE92FD93FA15516BDFCE9E0DFD058
+:10C69000B4F9E54FAE790DF2AF7C9CF929695F3FA3
+:10C6A0007FCFD777037F6FD963226827D9F3C7CCB1
+:10C6B0009F40FE559307ED1C2B4C5ED48FF7D8831B
+:10C6C0007DA1BC07B32FADDCFDD5E030CA9B55B8CA
+:10C6D0004F05323B475C6CF8DB7F4BA990D255810C
+:10C6E0001CDD9384FA75C5AB96201C3A5B767F956A
+:10C6F000EDB7FD70EB2937123FE29F9DCCD809F8CA
+:10C700009ACCEC6915AF8D7A66391DBFAC6EAF71EE
+:10C710000E2DCFFFC3B78381AFB4EC64FAC1793576
+:10C72000FC34F11032497E62B94AF7EB3CE86A5DAD
+:10C73000295F920FE5066CF1E0C2E0D042E100EB28
+:10C74000A27029017E98081EF3FE65E171E16E1862
+:10C750007F51C348226769E12279D9777BD02CE1E8
+:10C76000FAD9F73D5F0D06BEFB59ED7294DF1DADA2
+:10C770007B35AC3BEDFFA5754BA1AB5977CDBFEC3D
+:10C78000BA19FE0F90993C8AA583F678FECA8F31BC
+:10C79000FFBCDD83F3BD4AFA6FFC975DFF3FB8EF46
+:10C7A0003B25F4C775B4EFC7FE65D7DDD1BEBFC961
+:10C7B000F7DDEE027B6FCBEE6F338966FD1DADDBDF
+:10C7C000A0FCABF2B72BAF5BE83D4D864AD7703A81
+:10C7D000BF4F48F56D59347DCF7B29158EA3940644
+:10C7E0007CF1CE0D4315766E30819D092ADE260937
+:10C7F0007B5193CE8FDBBD04F58C89DE5FA07E403C
+:10C8000094CAA65C5ABF296F8EE711AC31F4B01FF1
+:10C81000F2D36EE479FD79EA5D897825AAC74ECC1A
+:10C82000BBF50DD0EF267965D4FF688A7ADF47998A
+:10C83000E3D8F71CFD39E28E9873C0ED33F4E5B709
+:10C84000F1FEA693C5AEE1145ED3BB2BAE2005D19D
+:10C850001DB9952AACE78EBB2452ADB157DE16D375
+:10C860009F4321DC4EF28FC16F6E1BFC16233C48A8
+:10C87000AEECD942AE027E84C1BB69DA9020D861A9
+:10C8800088E261F09B5EE6413B283F67AABCBD6A37
+:10C890005BD30474AB12FDF9529C1313C199F0736E
+:10C8A00027F6D32B0A77D52BE3B953D31FC243EC1A
+:10C8B000C7F7DD07B17FFFEC7E64C37EC4F19F2D17
+:10C8C000309B6F03FF85B99F84E7F6496B658C83C6
+:10C8D000310F94108EBE1C15FD3B270CBE6C509C76
+:10C8E0008B878D2C7F9075EB01F82CE0709C472A8C
+:10C8F00051EF2497BFFB6E0CF88D1042B4DC4BC88F
+:10C90000047A0E9937460A59E9FAE72B24E01C0A03
+:10C91000764D891CD5DA3583FA3CFCDC941EEDA7F4
+:10C92000A3FA89F8C30F9DFE95F2A3A37DE87905CC
+:10C9300052058757B4E7C47B1A181C2B1649C15EF1
+:10C94000884721D5A7F1EB7CC2F1FAAF0F0D433E2A
+:10C9500097FBCB414E3CBF7A07A0BE5FC1F5FD8B74
+:10C9600001B713EC35171B7A3BC11E73F18D7C8721
+:10C97000962F8AF4203F477EB0CC8C694B81542D92
+:10C98000C3798BB44E44395C6021C07762DBED52D1
+:10C9900084DDA592F919E98F9C0DFBC87EE6D3A62C
+:10C9A000CE4E9A7D5B3BE18C32B8FD3EC0CF518DBF
+:10C9B0009FE49F852F9C5B01AE072DE171BE38EB94
+:10C9C0007D8BC3AF78DFD746B0134C69C852012EB8
+:10C9D000530A645DDCCD7E859FA786916130AFE20E
+:10C9E0007DE31DA3605FDE903D160ADF8A860B465D
+:10C9F0007F1C7F5B2C3CA17FB00B1F533DF3009E3F
+:10CA0000C77E6121014A0FEF70FF0F2DF202FFA2D6
+:10CA10005D79C13EF6A1C2FC0AFD5566179F5A9C7E
+:10CA2000ABA6D17107D6B9868088E9CAEBF757DD86
+:10CA300058DE8DB713F5BA2E62F58E185DE5F1D686
+:10CA40003FC1C8D63F9F787E9C23FDEBED5BEE2F68
+:10CA5000EDA13C90EF0512F291F6784D903E2E1626
+:10CA6000494190BF708EC57CB184F2FF1D032B0F2E
+:10CA70004C61F252E07D2C9C2595C1598C9FA532CA
+:10CA80007C36AA0C3E02CE02BEB1F315F529BF1AC0
+:10CA9000ABB5AF4CAA1FF23CE827E50D920B4C7FDB
+:10CAA000E54AD808745851FFA80AFE823BDCAC5F07
+:10CAB000A2F8066BFDB5FD5505E7B37FE868D41F06
+:10CAC0002FAD65FAB177EE0507E841EF183CEF8D21
+:10CAD000067A7C57C678824470FC74D9B669058A98
+:10CAE000B6DF2C9CE7D445B92A98837EB468AFDAC8
+:10CAF00059834FFDD54E582EBE775DE41E0ADFE9FF
+:10CB000078388FC07F98C816DAC5C0DAA6BC245A18
+:10CB1000FEA3CA64868725B57B8D98CFC2FA623C96
+:10CB2000314E2C3D4D2B4ED2E5E7E487BB035C8AAA
+:10CB30004DA1259E3878DAA80A3FC9F794135E8A7A
+:10CB4000B783FF7F901317C679E3C06D9DDA4E3E21
+:10CB5000748E271F162F777706F82FDEDDBB331074
+:10CB6000C7E2370BD3E3C9878F96317FE0C7949F25
+:10CB700041DA328DCA87EB35F2619A05F123B6DDD1
+:10CB80004FD5AB940F62BFFE97F9CC47201FE2D080
+:10CB900075B5AA970FD31B66A17C983E4D266E8D66
+:10CBA0003DEE672AF77325940FB9E977605EF524A7
+:10CBB000C5C19B8FF8B904E00A298C0372E20F9C6F
+:10CBC000EFC7CA8B44FC7C8A51E2FEEA0EF8F9FFFB
+:10CBD00025380B7EBE989E5F400F6C8F8704F9F559
+:10CBE000E23B283F97001F193F5F7C17B74BC6F009
+:10CBF000571FF0D7E15AFECADA97FB993CA8A8CF95
+:10CC0000FAD54C5A7E67B5EA31D3FA7746F96DB654
+:10CC100096DFFE81F35B0AE74C579CFD9D3133891B
+:10CC2000B8F5FCAA0FF0A96343FE38F045C0FB77C6
+:10CC300064F4239EE072FCED217F1C0EF6F354A3F6
+:10CC400082F87382F3AFF3CB82D30A281DE7CF6556
+:10CC5000FA70D97619E1505EC7F4BCF23ED6A09BBB
+:10CC6000E6C70DFD1AFD810B77337F20055471AEA9
+:10CC7000661F17BE13AEEA06E59B24F467CEF32CBD
+:10CC8000443B3E59CFECC466FA87C57578D18E5CBB
+:10CC9000C6E1B5A06113DA9B1704F576E8B23EB79A
+:10CCA0009C81F380E0BF0BB7C5947B1E467F45197E
+:10CCB000D89B35E71099EB0FF7CAA1812F426CE79B
+:10CCC0007BEC5C15BBFFA25EDBFA4BFEC9F51FA433
+:10CCD000EB1FFEC3AFFF6AD7AD1A39BD0F25C38165
+:10CCE0003E4E18BC48EF81FFA2EBA7E3CC7DB46FAA
+:10CCF000676D9C510AA7CB770CFEAA2E50AF5CC281
+:10CD00007AF337EC38904EF3336BC91030D3CF5FE2
+:10CD1000AF978B6D72B8CE8D727666E50E69F64070
+:10CD20008037A9043C9B33D4E4077FEA414B2BF2C4
+:10CD30002F8177371A193E8FE6E31EEBDA5A80E728
+:10CD4000887AC9857411B2B0730585BF85E6F78FFF
+:10CD5000FA6A1C8737DA632AEAD9FE54D0FD00BA92
+:10CD60001AD7C0F3DB981EF6232A6FD01FD6B05710
+:10CD7000857625B47E0AF29B013A3F17F8E772D315
+:10CD800035FBB6FB08C3DB2D9287C4D9B77EF44FC1
+:10CD9000DC7DFB81F055C0E34623D7E7F9FE1DB4E7
+:10CDA00034150F433F94E4D90C951B92D18F72BC7C
+:10CDB000BA37EEE3AD1C7F63F11AF47BB7C69E343D
+:10CDC00019260EF19645168C73C3717B31FD47CB46
+:10CDD0004F62CFCD15A409F5980992FF2F8A26AE90
+:10CDE0006D3A8F3F117E5A4DBD5FA957A847325CFF
+:10CDF00006E093F78B784B881F4EC7B825FCD9DF28
+:10CE000023FBE39974BD97D6C81EF0FFDC6E701F3C
+:10CE10001A03F4FB884A002F2FBDAD7A99DE99845E
+:10CE20007C77D63BC7543085CCA23081FD9EF5532C
+:10CE3000C65F8F4167F4DB9FA8DCF282AF9ED48E81
+:10CE400080F8E1699EBD856EBA2FB70D3FB81AFC18
+:10CE50007053F35D870E017C1F9609C0F7E89A7C3A
+:10CE60003C9FDC7F9F84787D98C211DADF362DEB02
+:10CE7000D0213AEE5D6BD2D0AF36D37BA010F06CF0
+:10CE8000CE24BB0DFC6BB7F693895F03C7BB48D3B9
+:10CE90006AE0D7332BEFBB0DE65B42E500D8594B78
+:10CEA0001A0E167686FC06C9E3A6FD5704FCC6CE0C
+:10CEB000740B9BD65F3082BD631EAD07DB53B1811F
+:10CEC000D5ABA8913C16C0C7864791EFCCAB9188F3
+:10CED0000BEA537DCFCCFA0D9A69BF4D1B687B9A44
+:10CEE0009F0FEDA1DF9AE4E9E047AB785B66ED7355
+:10CEF00096BF0E7C691E6D478B4953CD7DD8DF826E
+:10CF00000D12C9A0FD95E464FD470EF4F7B6EA8161
+:10CF1000F28FF7FEDA08F3BE9B8ED785F63F470EF9
+:10CF200017427DF213C9B505ED4D2C4EB685D301E0
+:10CF3000F9B00BA32F89E7B91E28E4E107C65E8884
+:10CF40004FF3962EAF8275850369597004AAA8BF66
+:10CF50006004BDEE3885B39FEA6DC7781CDBFEC068
+:10CF6000316358C3A75A8DBDB1FDDCFA5CA4EF7BD9
+:10CF7000890FFDDDFEE54C0E1F596D094AA07FA803
+:10CF80002E9493FB575FFB24ACFFFC732AFA47CF28
+:10CF9000F708A33DF6D4069504E81C576E90916FF0
+:10CFA0009CDACEEC40F24615F3F31F30627EFF862A
+:10CFB000A9E3801F9EA2F0073CCCDF586884FC7C6C
+:10CFC000CAD74D71F8C73C7729E31731FC61FE7A67
+:10CFD0003DFDB7E3174BC631FE1EC30FCABA57A1BA
+:10CFE0009D2F964F54109BE00F4321DF14EA82F8E7
+:10CFF0005BFEB64A409F2B575C77AF07BC9969012F
+:10D000004F31A58BD001E06B9782923B40CB7F7470
+:10D01000CFAE1100BF93006FA08BB529E84F9D17CD
+:10D020009C857015F184F3D7EBF159C42FDDE1979E
+:10D0300089572B074A92885753EFE39F52BCA4E3CA
+:10D04000DD532F052D12E48FBCFEC070CCBB000F4A
+:10D05000CB977279BAD68E78FBF1BF5D580D78798F
+:10D06000F74312CE9F04FC552057CAD74B6EB063CE
+:10D07000CE7F88B59F4FDB03BE7CFC6B863F148F51
+:10D08000DD80E7E51B1E7D1DEBD7486EE8FFE34D15
+:10D09000B350FE96046482E53547503FA67200E324
+:10D0A00080F607E474C0F3F2552617ECA3C017818D
+:10D0B0007F4754E6B72766CFE0A9B4DD26A31BD788
+:10D0C0001D8B77F28C2CC4AF8AED2AE2474580E1B4
+:10D0D000D391E764C4C3FDAB6F47FC39BF454A80B9
+:10D0E0007FF9C62E807F4156DE867FCF4A1CFF180F
+:10D0F0005E9F5AC2F0311FCA01FF5EE2FA29213653
+:10D10000ADDE21F04FE0534778D74E2E25C037AA29
+:10D110001B4F8779DDBFDA82F3CEAFDA357D29D2B6
+:10D120008D8AFEF9FCAA7F4B073A9DA7B0380C0107
+:10D13000C73285C5E9B49BC7E3CB8D5DAE663E3192
+:10D14000F3D81B958B43412E425C49888EF3C7ED83
+:10D15000CF60FCDAB9DF1FC1B8C485AFD17DA7F5B8
+:10D16000CF6FB79310EAD341E42FA57532C685126D
+:10D1700025943D55737F44C45B2C7CC18EF02DDD1E
+:10D18000690A16D3F6A52F1F1B8CFEF015ADAF0351
+:10D19000FD047E2F31BB7C203C782AC4552A2CEE1E
+:10D1A0002356EE8E32317B4DF3AEA419A0FF48DB3F
+:10D1B000F6A23FA9B4F676D5A4B14F7A4C2A8E4B8D
+:10D1C000EBB17B2E74DFC18F08F39B3C483BBFE57E
+:10D1D000ACBF6719DD94D6ABA817956EDB8476BD1E
+:10D1E0008A6D1730EE35FF85E71C00878A7A591F54
+:10D1F0000FB54D0E99305E4B3E6262FC4917975455
+:10D200005EC7EE6594D7F2B89F98B898852FEC7EEC
+:10D21000394041B3F0C5AD0EA0A3B34D5B1C004F28
+:10D22000DA1FC6134DCA49106FD4519C51EDC3711A
+:10D23000E38CCEC23F2882DC6DD2C767926D8C4FE3
+:10D24000D15DCFF6C5B1670A7D65E1735F3C0D71B5
+:10D25000AFCD3B3F7B1AE6BDE8EF979E86B80DB297
+:10D26000C7E202FDA1E2F71F61FCA068B7D4C4CFFA
+:10D270003FCF6EC5B8CBF39F9850FF3BBFFB542602
+:10D28000E807E7777C9D0EF1944B7617A2FD61C904
+:10D290004BF99D499CF3AD48012F835711F719BBFA
+:10D2A0000FFBEBE4908DCEF3DC6113D2775BBC58BF
+:10D2B0006D198BBF73F338B1EDF1E36A457C537997
+:10D2C000DDD44937027FAB6372BC2DDEA9A3F8B071
+:10D2D0000FE97E5E7F15FBB69DC7FFC5ECDB39F815
+:10D2E00007DD9F274CFAF8B02FEAEEFDED535056BC
+:10D2F00017FF3E99A0E38EE025E276E798BC411344
+:10D30000D0CDCEFFC4383CD8AF6237C8F92F32C178
+:10D310006E795A6D457B60EB6E930BE2B64A777F70
+:10D320008CF471FEA58318174B78FCEC79D2F6C308
+:10D33000E21DB94DA2A2C6CEE2CA38DC21EECCED88
+:10D34000C0EF3CBE8CE1AD883B4B146FF691A91742
+:10D35000BF77C1E2E2CADC4D4680BF360E4DCA81BE
+:10D360007D3AA28BDF13EB8EEDCF057018A98D9B54
+:10D370004C14CFC7F5F1B67D627CF8FC261E47D968
+:10D38000161F4948F7A110EFC3E45D4550FA98C451
+:10D39000A1471137D9144B8FC1AB8B97EC78BEFFE7
+:10D3A000183CF69B98FD49C0A5F9727C7EFC19A734
+:10D3B0006F7A2E396BD2DC4BB9879F4B441C9998FE
+:10D3C0006F552D93BBCDDB985E184BCFE5DCDE1E91
+:10D3D0003BCED77C9CF2FABD8381EF34EFDBC5F105
+:10D3E0008DE173F9F623C600E7CF412D7F86FEE27B
+:10D3F000F013D9CCFAA3E7D8B8FD556CBF10B7BF6E
+:10D40000B38AF77698FFD926A6679CAD958B827173
+:10D41000FA3FC7E54FDBBAED463C57C90E2BF29FEA
+:10D4200025F69CC3CE54488D18BFB072398F77F85B
+:10D43000A92703E0BCD27E0B81F9AC06F868CE992F
+:10D44000AACB4F40CF51337CC3E1FC24E62BCA8DDD
+:10D45000A90612D4EEBF12C0FB91137B7DA5807C80
+:10D46000695AA6BFD7D1A4B80EA4D0FE9A0A240F39
+:10D47000E8B3EDF14CDFFF64AFACB38781ED19D6B3
+:10D4800075D163C0FDB41B422E5A85D82D4D197835
+:10D49000907313B7928E21DDE8DF7E64D9B61E70DB
+:10D4A000CFCA413C1294DB3D6DF75BB03F27898DBD
+:10D4B000B3261FF6C926FC0A3094BBF6825DC2DA99
+:10D4C0008FF483FB3B2E62F5C0FB0AEBF8BDC7B5BA
+:10D4D000763FCADB8474E361F75E849DC899A3E854
+:10D4E000EEC5247BF5F994987B90825FE3153A0AA8
+:10D4F000FF71FCDD87E442B67EB057F54D8FCE3725
+:10D50000398D7842503EC186F1CC361B9B9F982FB7
+:10D510009D0FF2030A26369F81E100E8E1745E3137
+:10D52000744CF0DE139DDFD198F9E9F4B83BCC5C84
+:10D530003E2844013E623337110EE78BFA38D300A0
+:10D5400081B803671B5C6939ED274B9A6482B80583
+:10D55000179C827BE37831EDBABBB4F7C5EAE11FD3
+:10D56000A3D05FD468043FBF5982E333E90CB80607
+:10D5700040509A8C008C5FD9443E84FAA2AFEE20D2
+:10D580009E3FCB6A0F62B901F2344D497217741B8A
+:10D5900042C8C36B0A0A32FA43BD5919060FE61B8B
+:10D5A00015A0A3C9FE0CC310987EC1AAC631846C15
+:10D5B000259503C0A2645EE56D7CA307E01541A735
+:10D5C0001D09781B0137B78A3C6580F0BEC2566BD7
+:10D5D0005BDE6BA67C716BAFB67C00F23500FC1B8A
+:10D5E000603C6FE32A88F331FB5699E9B893371A08
+:10D5F00090EEC6466C78FE20E14EC89F09A9B4FAA9
+:10D60000E2DC976EB3F3F07A1DF1F1AD3C1E79B216
+:10D61000DFEF81ABDE23B93C26AEF030B88FDD62A0
+:10D620009EFDA4594B871B2FCABDE8FC9E84BDA755
+:10D63000ED9D45AE5BFAD1F939371858FCACD9FFEE
+:10D640001BA8DFF721BF01AA8C25E1FB25E0C37FE2
+:10D650004EC5F98871AA76B37355D56A437005E251
+:10D66000AF5B02F916DDBF70CCFEB5B2FDAB3F82F9
+:10D67000FB57DE7084ED5FFDA6BD466E8F8773CBD2
+:10D6800056E2D901A6A71D6B661428745F524CADF3
+:10D6900055B0AF2A995E50DC1FE1FA425CB8F2F94E
+:10D6A0007504D7ADA737FF7C30E8F5CD064F5F1284
+:10D6B0008597A877C8CCE2C4A659FD0D304EC5E3C6
+:10D6C000E12A38FFBE7AFA7DF403F76DBE181A4CD2
+:10D6D000E7DB770C37A7F071B7366F467FE656C0A9
+:10D6E0006337B8EEFD2B404E268607C3EF3678D45D
+:10D6F0001D41F818204FBFEFE4F728F2EA252FC8A4
+:10D7000089141395A3347DCFCCCE31C7CC324F9939
+:10D710009DD1D9DC4B01BD386F9A01CF534E9E4647
+:10D72000D7CFE3FFCC8A4EBE88FD147844487512EB
+:10D730009C730A9CFE3FEBF1E6B1A45EB47CECF175
+:10D74000A3F7835D4FB4DBB28C78E66AEE4353FCFB
+:10D75000D9A56B57F88015ECA1A23EE065BC730219
+:10D760006D7716DAC138B08E5DC72FCA00EFABDD1A
+:10D77000D7D8EF4DCBE8787D12D38F2F97DD2B8A4A
+:10D78000FDFE77B3F03B327DC41BBDF7F777C08752
+:10D790003273D8318DEE6F79EE2523C06145D2F911
+:10D7A000D1F1FC9E89E6D174F95A1BC8E97D115369
+:10D7B000DC7B04FD2D4CBF7877D90C0FF8E11F16E8
+:10D7C000F704B83C2BE07CB7A04F6931635A9AB894
+:10D7D00031305870B959085FE8FC8A727628203FCA
+:10D7E0000B89465E32F93801F49187F36482716ADD
+:10D7F0002E5527DF6E057BB903DE05A96C84E16F2A
+:10D80000CED0DF039D34E68802EF158CCFA1E2581D
+:10D8100082F769F4E5B7C6DC139DEC9DE529E0E5E8
+:10D8200097F0FF415CE7A49C3B3C055A39A154F7B3
+:10D83000837D3EF8AD1C576F7CA00D3E3E84EB2BE4
+:10D84000160A9FEB619DB35631305D191EB1708C85
+:10D85000854BC19FE7317B610C3C6EBE5CDD98124D
+:10D86000070EEDD75DDD0FE4A6805F2C1C9AA02E7D
+:10D87000EA4DA620E8814D4A18E1D844E118E07E3F
+:10D88000ABC274CD3E8BF970FDE156FE3D169EB1E4
+:10D8900070A4FA05EA0FE307D9D10EF636C00BE300
+:10D8A00000AA3F34D1EF6FF651C923C0FB42633168
+:10D8B000CEF02682B022AF489505E8977131FF0A75
+:10D8C00095E70C1FFECCEC57C51136FF716E162F75
+:10D8D00043E17134061E4763F040776E899DE72B64
+:10D8E000F08F5171F083E3C1220B3FDF641237DC0C
+:10D8F000FFCFFE64B893F185F8F2716CC4D7D60FF0
+:10D90000D33BD8FB1C12F1B77D77D17E425E15E385
+:10D910003FF3CD2EA48F7CE24D81F72020C810E686
+:10D9200029E6354CF2FDD49206EF378D4FD1BE0F6C
+:10D9300021C617FB92CFE1974F027BE11C9A4F94CF
+:10D94000CFB5EB16FD5559B89ED593F4443F391821
+:10D95000434744FB13EB4B4921217C3F4432E33DD9
+:10D9600027FA5FC0D8293A9E881FB5DBA7545B58B9
+:10D970009C0461711221DCCF3C5E9EC7DF6922E608
+:10D9800084EFF290EF92A2F37BDA2229F86E029FE5
+:10D99000DFB937CC0188D77850F26F86719AA5B776
+:10D9A0000703BCA83E760DDED38F29BF74B8B11C27
+:10D9B000CA69BD79588FAF6BA1CCEC64F4FC8FEFD2
+:10D9C000A1B4E7E3CC9E46C94D211AFACCB332FA92
+:10D9D000BE95B8BBE37B69C4AF40DA6861F7D06E2F
+:10D9E0003EFC18EEDF5BD69BDF007A2B224105DF81
+:10D9F000F971E9F1B0433CED177BFEE5EFBA28ADD4
+:10DA00009900D77D966BFB801C13FAC2FB16DF1FB3
+:10DA100060BDFB2C8C3F1FF58E7817E4C2ECDC61F7
+:10DA20008786D3D460F6E1BB0BF7025E5178E6003F
+:10DA30005ED1B6FBA0EB2E88576F5846C0FDFB1891
+:10DA4000BC32337BDA6CCAB6601D796BD46FB4F329
+:10DA50006A8317978B1DE987A4912AF4E9F0DE0207
+:10DA6000C3CF7D165300F4B6BC87597CC41CE27F3B
+:10DA7000BA5AC2770074FAFA5C0BB37BCFFDB505D6
+:10DA8000E99C36DE50097E2E0B7FCFA11F7B77A746
+:10DA90006DBC6A4D7BD877733AE2E15CEE3F3C2E79
+:10DAA000B173CB5C4B21BBF7BB5EBDA8C5C7D8F13A
+:10DAB00013F61BD36E9FC4EC24FB5437C6838976C0
+:10DAC000E72D4C8E5F34F7DD60B8C27DF079E64E0D
+:10DAD00003959468FEA4C532239E5E20FA6B3B97A3
+:10DAE0008BF30431AF6EEC1E3D4FAC5EA11ED09F98
+:10DAF00027D403FFCC79C2F5887A60156DFF848145
+:10DB0000F9DF88E2EB3F59A30775B1327DF080CD94
+:10DB1000DBC54AD327B8DE48359CFE5A7BB5A897AB
+:10DB2000BE348F1C1B167DB74D52E80CF1DD0DFF86
+:10DB3000729043CA0C827281F29F7BE2C50BD9EDD1
+:10DB4000793D601C41970F1BDC35D52C8E01FDC043
+:10DB5000BEA5B351CF9BBAB404D396A397AF01FA35
+:10DB6000CCE3701E60E5F69324463792E41F60858F
+:10DB7000F87CAF6C073FEBC27A99FBF1D87B575327
+:10DB800027C869F0FD9859C5F3E13E3BDBEF63849C
+:10DB9000BD5B9377D0E4ABA3E965923BC1AAD13BCF
+:10DBA0002F9302CC938C74F46B8B7B8CC748169BA1
+:10DBB000EF1AE637B8B8260BE39BF7A97A3BD5589E
+:10DBC0002BD393C75AD9BECFE6EFDB019EC13B13DF
+:10DBD000B31537DA0D67478CEC7D353A0FC4438BAC
+:10DBE000BE9F22DE4F515B3F04EBEFB3C4F6A3B000
+:10DBF000FE393EC7C2FD354B7E31ACE732F14EB047
+:10DC0000221EBA15804FDEF0C6C3C0F73AE6F30114
+:10DC100009F87CC56529D413EC68752A9EDB9AB98E
+:10DC2000DE7FAE6E7FFA6C9A96EDF8C001E7C3BB5B
+:10DC3000F93E9D539AF03D8A452FC9789F9AA26F6D
+:10DC4000FA8FB0FD9C6C761F84DD6710F2EF866F53
+:10DC50007B77F7613D763F41E85DF9E64010E6B736
+:10DC60006FB98CF62A2A1F75EF9314D6B17B0BB1CE
+:10DC7000FAD812ABCAE338D93E2E71B17112D17302
+:10DC80005EC44A821A7ACE53DC0ACC3F2FE220418E
+:10DC90000AF773A737AF9B48F13C90A1E2F98F4A8E
+:10DCA0009B46D407A3FEF1467847AB91AFE740DD32
+:10DCB000D469F0EECAEBA472D5205AA720EC4F65C8
+:10DCC000C44D4F6FD9517DACD0A5D70363F5C4A225
+:10DCD000864757C11B2DCDF001C6379B30BEB89D7E
+:10DCE000FE68BE39AEDE48C8A3883F37BCF4CCAD71
+:10DCF000F02EC50D670C2E98DF34AB9BD153DD257C
+:10DD00007C37A19C84A64379799DEC0AD1560748BB
+:10DD1000DD75202F857C1770095DDE6FF6801CB0E5
+:10DD2000C8AE15B04EF36D3688BF18DD323015E43D
+:10DD3000DC3EB38AF6C93C4B5FDB1C0D3EEF4B6506
+:10DD4000EF091C48EDADFF6E5E771DC8BB5D3C9EC4
+:10DD5000ADF1E49DB630D69B9A8AFA9A90EF317A6B
+:10DD6000ACB0838DEF2BB7D9C1B4FA2F91373C6E8D
+:10DD7000A1E5B75EABE27DB88230F3A7B693EF972B
+:10DD8000FDABF83945F7BD88EB0DEDE47D14CE3AD7
+:10DD9000FDF4552BD7CFDC6410E89BA1CBEB16E24A
+:10DDA0003DDA8624D70AB433307DA6E578E9BA098E
+:10DDB000F0FD6D99D94D2ECB4847FBF62CEC19D6CA
+:10DDC000D02F9514B86F5F0EB970FE35BA2F5F9ED5
+:10DDD000B07A028877B5D7C5F79705399C425D9927
+:10DDE000FD3DD095BD8FC1CEA33745CFA34DC00F0C
+:10DDF000E07D19101B191B8E18E1DC7C8EAAE888C7
+:10DE00005F74D1805F3779C3B24B339FE356662F7F
+:10DE10009866F51E023E122079DDA872424AACDEF9
+:10DE20005C880F6F9D4C5C9BE97A769FCE93549AE9
+:10DE30001FB325CB23D1FC4E5038816FBE24072160
+:10DE4000CE6427DC67A3FD2E68AA3666D171037500
+:10DE500032DAFB1770BBF969359099ACC18F5F2638
+:10DE6000B1714FABFEDF423FA73F31A11DFCF4096A
+:10DE70006B5C797B7B12E397AF71793624C98DF99E
+:10DE800050F3ABAF77A5F30A455C4300EEA5DB2E5C
+:10DE9000C8F09ED28D5C2F2B7EBC6915D86B266E88
+:10DEA000685580EFF882AE4210B553B6795490436E
+:10DEB000D3B6FB54D8DEE97595189F34A3BEFA009B
+:10DEC000E4EF0CD562FEBA24FFDF00AE37AD69DDAA
+:10DED0000FE8D2A79A28F8BECFE74CDF4AE3F3E871
+:10DEE00015F1EC732236E71A00BFDBC67FA84901A3
+:10DEF000957EE22A363EED4F4D82FE2A5BF341AE1F
+:10DF0000652E65FD6592BDCB9DEE68BF632F3749D9
+:10DF10005A3B42DE4F16211E3DFDE0A29E60670F78
+:10DF2000FCC944FA66719A4885EFDDF9FDB270FFCD
+:10DF3000293ABF74C8C4F08698592AF0C96B66782C
+:10DF4000E4B2825EF0E3272BAD4017A93EB7511B28
+:10DF50007798B7AE78C09B80A71613DAE3BE1CC2D1
+:10DF6000F4F62F1FB505F9F97400E0AD9053B363D3
+:10DF7000FC2E513A67784FBB08C23C444AA4152E88
+:10DF8000A2CD935006CCAB4712E3633546F74C184D
+:10DF9000AFC66A72C178B3CD7D8DC097DAEC9A3C7A
+:10DFA0002E6D34D72B779FDE9702FBFAE590E5992B
+:10DFB000A02F870CBF413ED4115E3D66F566273128
+:10DFC0007D0EF57B517FD749EB409083AF097DCB28
+:10DFD00033AB27AC57B49B9AC4F4A89DDC3F27E829
+:10DFE00020B58978370D445079776AE0313189C995
+:10DFF0005191EE54DD0146472C9E73A73D64EE0D12
+:10E00000F4BAAB37E6537DC4E681F895FABE1EF04C
+:10E01000D3503A9F98A489DBBB91D37F6A532BD20C
+:10E02000DDD59E034670F886945A4E3F04F910D011
+:10E030000FE3CFA16EFC1D1EF4FB015FE0FBD34597
+:10E04000CAC03870DC67B1EE544EF7F773BA0638C1
+:10E05000407939CF8BF2451C5E85F240A7366EAC15
+:10E060009DDC5E9A41403F2C5CDA15D3724E670B03
+:10E07000CC8FA29D7441EAA3681F4DF55663BAA0E8
+:10E08000A01ABF676C9885F8B1607DFCF7C5DEE229
+:10E090007AEFB9D306F68E94C1DA15F04F9437595A
+:10E0A00055CE0FFD0F023E9CA95BF7E46077D4DEEE
+:10E0B0007BA686C9C112AB5EAF5BC6F161F7E7FB19
+:10E0C00052005FBEB4544FBC13E8648BEC5A0EFB95
+:10E0D000585328B9E3E09F16CE00D78A9A2FD0AFC5
+:10E0E0005A4EC2E8573DC3F53137F79F0A3F6BB030
+:10E0F00086F1D7D32AE3EFA7A51409E803F83BF08C
+:10E10000D9D3271EC97C10F048B2A35E037C738765
+:10E11000063F166EDF54D595FEF3A6CBECDE4E48D7
+:10E1200021362D7F167822F86DECBC37F17D1578FD
+:10E13000383A2A87362571BB686FDA6FF9A317D191
+:10E140002EFA32DFBF1AC037A0E73502DF8618D8B3
+:10E150007B697A3A1EF903F1EF5D8F3D95897687E9
+:10E160001C4AB7F0BE1AD0751CBCD8C3F1F231AB53
+:10E170007F17CC3F96DF9F91FCBF4DE91D6DBFEB34
+:10E18000E42D03666BFA59CFE1F1A5EAEFE98A03C2
+:10E19000AF285C4957D8E712BA330007B241726919
+:10E1A000E3DD533730FBFE7B9C3F88EF222FE03DC1
+:10E1B00036FAAEDC7B494CEE1B4124670499DC2720
+:10E1C000865BBA821C5F60F5DE827696470D04DFBF
+:10E1D0005195F210DF536B9E38F9ED70482DBDD08C
+:10E1E0005F42DC06F0832E78D88DE7BD15BFB320E3
+:10E1F0009E9D4862F1112B6A54C4B7336A35C6E15B
+:10E200009D3951DA13FC2D814F981C4A044F813FF0
+:10E210003B39BF1178D76B2DC3BB1AC56B05BC1337
+:10E220007254E0E7992D370F057A13EDA378E31ABE
+:10E2300022F06616FDDE6B4D5886FDA1FBD60A70F6
+:10E24000E8BDB615F957A27D137E34B17F82AF0FBA
+:10E25000B319747E03838DCD3F3581DF3F2AD7F418
+:10E260007C98EE87641BA1C77FB85A29E8A9B90337
+:10E270003AB8C7C6DE77AEFACB1CF4DF0B3F8CF0A2
+:10E280008F8AF1536C0C1F12F9515ACCFE4EB618FE
+:10E290003F9F1BF93AF39B88DF33B0780B8B63DA2F
+:10E2A0000545C02F8E5B83DAFBB9D72AC4AB0CA51A
+:10E2B000D861CBC2795D0BAC82E653971A491F7ABD
+:10E2C0007EFA72D4DE4607AD3FA1355C7C3D5DDA57
+:10E2D0002E6378DA24B0EB126F29E8136883073CC9
+:10E2E0006F66FD1257AD6E9E03389CC5BE887527BC
+:10E2F000925B89F6E31E1BF77BF1F2583A37F2F294
+:10E30000D39C8E3AA6D38013E8F42612580EF1154A
+:10E31000F4A08D71696D744A0FDED07F01EF577CD8
+:10E3200017F938745A604BD3D06924CCE894D3A33E
+:10E33000B346F5C6D34FA6D8983C72D614E6823CB5
+:10E3400071FA30AC9CFE30BA5E40E91AE83500F450
+:10E35000D919E0C9E8AC97B71AE3197BD530BDFAF3
+:10E36000CB64B6DE05377AF7C27BC80BA85E2FD127
+:10E37000AAD59CAE13C33DE494987C72023FB96960
+:10E380004C381FE4AD1BEC169DF1575BE0A68C1DCD
+:10E39000438221BAEFEECB84F189134FDDFD20F0EB
+:10E3A00087476D78AF49C89FB424FF3CC0CB44F485
+:10E3B0004CF1D20B76A7C55FDBD8F92F81DF7BEC60
+:10E3C0005203E99382785EA1C5F3B1BE5619E09A73
+:10E3D00092E4CF5093E9F836EF38730FBABE2CAA07
+:10E3E000DFD2FC4F697E2D5DC7D64E61C2F355B6B4
+:10E3F00051FFB83D2EB0F6A6D7C1BFBF25C9FBEF70
+:10E40000308F16B32F00FB7C53B75619E395AED26D
+:10E410006F5F017638BA9EA3B70DF8DD2CFA75F65A
+:10E420001DBE2A2815F6E291DC5E5CD13004EDC8F1
+:10E430001ABBF12F6D57B01B7734AE83D33DC56F38
+:10E440003CC739725A65E08B82AF6CB475E2F81C38
+:10E450002670AE10F4057C09F45A113F00F6433BD8
+:10E46000FA2382887F90770E8DF29BB5D586B8F11E
+:10E470004DDB6DB6B87C9434FCEDE507C53B8A8C6A
+:10E48000AF6EB769F48A9AEAA3E94C4F65EF92DD63
+:10E49000CFCFF2EB5678DEEB931ABDD73CCA640CB3
+:10E4A000C07B8AF460E67669E223A506296487B812
+:10E4B000BB6F6811E0D137064CD7FDBBAF280BEC22
+:10E4C00025870D9E1504E310103E393D09BEB35358
+:10E4D000CFED9CB9C76C5EF0EFB74866E49F2D475F
+:10E4E000AC01909F2D7603DAC71B779B902E2EF5FB
+:10E4F000B1723B465067EF10FE9A4B6FCF4901BE99
+:10E50000FF24F75B3E79C735687F14765945A13003
+:10E51000EF04662976EF326F6957B49B0A3B6DBAF8
+:10E520007996C4828458FF8A99AD2B5DF14B60FFC8
+:10E53000DED4417CC35F6D46A1EF1E06F8563C1445
+:10E5400036C27955E8BB421EF76CEEB517E21C7A6D
+:10E550001631B3D8A6668301D6B789A25172567B0D
+:10E56000BC12F8B3A97D1CC1099B865F4E5ECDE24B
+:10E5700008DAF2BCDD6F791CC1D8E3475FC4F7F25B
+:10E58000CCFE8F74ED0AD3ACF1DEE19EBEF4416C9B
+:10E590009F08EFA71BD8FB3BB1DF4D76CEB795CADE
+:10E5A0006E78FFE9AF3F4E72C7B1C74CFFCB6CFC32
+:10E5B0003D11B1F6B3E8F8FFEE29A0FB26D9DBFC4C
+:10E5C0009499E037EBC84F193BEF43AABF473CF99A
+:10E5D000141B4727C66BDF9E9DBFDAEA19897F8728
+:10E5E0008DF53B54D36F8E9DE93DD32582F1EDE44B
+:10E5F0005B82725AE009857B373B2DCF7EE7D830AE
+:10E600002BFA715A65E003970EF7E98EFEF304E7E3
+:10E610004D311F42FC7DE3C5694C877776E2AC6FD4
+:10E62000849DC9E7E92AF3374877F4C5F3FF748B73
+:10E6300049D2C6E567D9251D3D097BF33ECB48BCD1
+:10E64000BF0876F978F08BF5C366818F348DC1C52C
+:10E6500013079F84DF4FC0B92AD79BAB30BB18DEAE
+:10E66000434BF532FE995A44D07F3652F2223C6E2B
+:10E67000B6337D69138F7FBBF4368B57CDCE75E3F0
+:10E68000EF71A272A2D03E02E3A95E3468E2A9044F
+:10E690009E543D47E5B1CE6EC8E84A9C9B93391F16
+:10E6A00076C17B129A7AEE87800744E540F755667B
+:10E6B0005D3E73898B281A3991ECCDD0E5BBFB5CAC
+:10E6C00056382F752F72EBDA09BC13F17CF8930AD8
+:10E6D000EB76A1DDA9139FCF48C98F78037C0DECA1
+:10E6E000C1F7F27DA2EB9D037834B6287C498B37C5
+:10E6F00062BD1DADEBE83237F2C2E3CBE87C295FA7
+:10E7000098B3366B7906C2DD45E01C71729919BF6A
+:10E71000DFCBDB273F3E0BEFC926AF72A33D36D9D7
+:10E720005BF93ADCE349AE74E3BD81B9D59204E705
+:10E7300074CA67B0DDC6652E4CC57EBB68B9648BF4
+:10E74000BE239E487EADB2DB74FADE15E4D72AFB09
+:10E7500088F6F2CB60F6BC097EFDB206D90D78B121
+:10E76000B2B813C6F7AEAB65F7D9F637B0B8BA751D
+:10E77000D3991C11E39E7FC989F2E2BCF87D29DEA2
+:10E780006FD2A7A0BFFF9B74E0B39B6CFEC7EC1ACF
+:10E790007EB9AE618485BFAFAC933FF4C705F71B6C
+:10E7A000D0C726819E34648DD21BE9FE29684FE6CE
+:10E7B0008587597A039EFA3F8077482F1DFE3C13C8
+:10E7C000F64FF8EB843F4F8C23FC7D92E47F463B71
+:10E7D0007E7B7F9EDE0F253BCC18879B23B3385C66
+:10E7E0008D9C25B08F2B411FA478B6F28815E1B11E
+:10E7F000F25B466F749E2FC0388DF66CC41F214F9C
+:10E80000E93C07BF4BA2F3AC30B4666ADF21D5CC3C
+:10E81000B3FECAF38C8953E5F392ED0ACEB785585F
+:10E820003D30AF7AA3E7B01FE4EC792BDAED5ABCA8
+:10E830003758E03DD916728305DE99DD6EF337C295
+:10E84000FECB3D5A1DA067EF6F18D61FE69BC8AFE1
+:10E85000DA6CCB7B03E645D7F716F20957F8D2F30B
+:10E86000EEE8FAAEE08F7D0FDA7D8FF51FFE3EEB0E
+:10E87000AF80DF8FC10CDDA84F499CEFC6E295D475
+:10E88000B0F76B880FA2F4837199814C125C49E157
+:10E89000543588E117994BF8EFC7D1E3C1269BEFB8
+:10E8A00034AC57D0DD15E0D30CF37EDCE63B0FF53E
+:10E8B000611E70CF83F299562EAF5E341AA27A543D
+:10E8C0004A0AE357ADC904E36762FDDD76FB94AF06
+:10E8D000A05D7A3FBFE41AF8BDF09C38AE08BF10C7
+:10E8E000C63D887BA665E09785F8AD3AB559FF7BB4
+:10E8F00074F470D86EF359A1DF401E7B2F0EF06ABE
+:10E9000025B9223C1C0E84873FD941E1615729BEBD
+:10E910000050726665009C5BCC2C1E60E772068717
+:10E920009677181C761D37201E3F410620DD0D35D9
+:10E930005CBC1BFAA7FCA31BF433A6B55682F36F8D
+:10E94000E712B701F86CB7568F6CB832DEF6743048
+:10E95000BCEDE560FB703FECC3B0B7995DE60A78AB
+:10E960007B0D8CF73DE07EBD63C4D5F3178A57C39A
+:10E970001C1ABCBADAB82889DF8F8CED8F9E87D03D
+:10E980004FB0779709F951F94E761FB47CCF293CE7
+:10E990007797BF6A42A42C78D5C2EE35D4B1F2F392
+:10E9A000B9F1FDF9631CEC9C55567B9F472F77030B
+:10E9B000F8FD97DE8BAE3E72D43F9A3281DD13585C
+:10E9C0006911F1A0CC4FEAE07896D2C3E705B9927D
+:10E9D0005248F0BE80C3C6E206DBDF0760749BC608
+:10E9E000DBB95C6E09E01D7B3F200DDE8B667E6E21
+:10E9F000C417D960F580DC4F298AA9672B423F6A8A
+:10EA00005ACC7D82390EEE4735920CE023B596F84C
+:10EA1000F7805A1D42AFB3E2B94EE1F36AB41BD995
+:10EA20003B2E7633AE7B71324929C6BC82F23CB6AE
+:10EA30001F91267B0DBA7B26294556DD3B0A69BE10
+:10EA40004EBA7CE7195D75F5BBF87BE9CABB950C3E
+:10EA5000D095F7A81CAACBF75C7A83AE7E16453812
+:10EA60006DBEF79A5B74F5FB564FD1E5AF5D7FA79E
+:10EA7000AE7EFFE06C5DF975DB4A75E5836A17EBE6
+:10EA8000F2D7D73FA8AB2F27D0B35F72B0F38E2C4D
+:10EA9000F46CFB703FDE2BB29B2593E63C57CDF721
+:10EAA00023D7519401FEC755F6711970DE6C4CCE18
+:10EAB0007686E3F42BD27FF41CF6BC436F3FCBE3A6
+:10EAC000F6B3F3FB281781DF57B19FE201FE7E26E4
+:10EAD000FFF30E6E0F98E586FAFCDD0AC583EB980E
+:10EAE000EE30A35D2CB6FF6A873BEEF94936785CC1
+:10EAF000C552627809BCEC085E2FF3F9FFB3F03A17
+:10EB00001413F723CE6FB1EDCE390C5CBFF637018D
+:10EB10007F6B3BA79156D987E7B4CFCF0708F05357
+:10EB2000827A4B223D408C2F49BE4FA09F587EEAEF
+:10EB30005B3A8F9D330D5EBC8F95E8FC76CE117BE2
+:10EB40007E2B9C81FB916CD4C1E9D3363AF7EACE97
+:10EB50006FAB92B3F1FCB64AF5665CCDF9ED5307A5
+:10EB600032270A77373BC78AFD347ADCEC1EA75E72
+:10EB70007F69AF6F53F947D7B90EF43809F4B2146F
+:10EB8000A67FEF64F7FDC5B857A16F13E755E8DB23
+:10EB900026E259A3C8B85F4627AC7F5EF87E8BFC9F
+:10EBA0000FE9D74EE7F7907FEFAB1E8CEF7F7F82A8
+:10EBB0004CE0DD954B4523F19E74227CFC90DB5F9D
+:10EBC000DE7532F87664BF787F59C915EF57BC3FC0
+:10EBD0009EC5514E89795F778493D1CB2427C7078F
+:10EBE00013B3439C7BD98EF1F0E76EF9087F2FD2E7
+:10EBF000B9BA61C303F87BC03C4B206E2660B3A357
+:10EC00007D6FCAF811C397DB3578C47FDF58FE2BC0
+:10EC1000EF38C07E336547EFB4802D31FE4CE2EB18
+:10EC2000234AF81A8C977EED0CFE3E9A29BBFAA671
+:10EC300031FBA23ECE2CD6EE33656939E29BC897F4
+:10EC40004508C695B5E515769FB82CA2601C5A17E5
+:10EC5000279783DC2E94105E5709CFD8EF029EEFE2
+:10EC60008F3FC3EEC55BE2EB1B3F71EAFD16B1F7C8
+:10EC70005212DDB798CDF7E952D128BC5F3FC5E805
+:10EC8000EE7B35762A01A7A6CBA792802FEC81FBDD
+:10EC90002E71FAFF9193F1B33DDE13296096CE35C4
+:10ECA000B7E603FEE7723B789C78FC0AA0BBB19103
+:10ECB000A21F241E7FA993DBED78BC7B81D3CDFD01
+:10ECC00092FA78FC8EEE134D36C6976FD3A2F0FB06
+:10ECD00008E8F5FE8D2AC6EDCDA7730880FD6D937B
+:10ECE0008AF6B70F2E9B08F8414E6D509F8138B3BE
+:10ECF000928DBD373E4EF325E34DE8B799BF89BDF0
+:10ED00003342C65B82E07F2DD9F4403ABC1BFE192A
+:10ED1000A5DB4554699ABFF1098C7BF9E0F823180B
+:10ED20005F7D06E8997E2FF9F667D301FEBB8CD58F
+:10ED3000D70DA1E9A2ED92EE7E44698D459717F1BA
+:10ED40007B62FF8814BD37E1A6726433DF2F21AFE9
+:10ED50008745FD5D9B9DCCDE8171F0E513D8FDA854
+:10ED6000FD27D9F9FD401F16DF171A7F7BF110BA76
+:10ED70008EF169EC7D96D8784002CE31783F85C718
+:10ED8000EB8EFF4469BBC7C2CABDB642CDFD80D77A
+:10ED90009755E2BE8CFF35B39B8CCF6271ED09E3D2
+:10EDA0000433DAC5F9F703B9D92E3E307A7FE76824
+:10EDB0003CBCF9430C5DEF3FC9E201E7BDCDDEC7C6
+:10EDC000EA886F7EC8E7FDC1F101773D4FE1F1416F
+:10EDD00011E3E21F5CBE7935BE3FE39308C4659E34
+:10EDE000BA1CFF9E58B253E84DFEB6FB34B03F53F9
+:10EDF0008B16B4E5812C6FF3DDA7BB6F73F5FCE6D2
+:10EE0000CAFC64A593F91162F97B2CDEFF9FE2EF47
+:10EE100053C61FC884FBF734FD1DDEC3DFC1F86392
+:10EE20002C9DC7F27331AFD8F996450CBAB8E16999
+:10EE3000C0074668F9B911F93C55EFD9BB30D94A3A
+:10EE400070A5847A80E4A270186E0BA6E4D221FE2D
+:10EE500007B1ADBCC8008000000000001F8B080097
+:10EE600000000000000BDD7D797C54D5F5F87DF3C2
+:10EE7000DE2C496692C96412929084093B15718018
+:10EE8000B008A82F04421482032AA2069D84256C90
+:10EE90002191AAC54A9B810444441AEA8614ED4094
+:10EEA00041F95AF41B116B6C834E04115C6345C528
+:10EEB0007E15C3229B2811AC1FEAC6F79C73EFCDC9
+:10EEC000CC9B4C58FCFAFBE7173FEDE5BEBB9FFD22
+:10EED0009CBB4CAD737D82BF2F632929EC369F9D6F
+:10EEE000B1B3F87755383D611F69760E62ECD138C1
+:10EEF000BFCD990AF5DECC1CC912191BF856BDE22C
+:10EF000087FA271536B93E46BB1FE34C8C41BB2D13
+:10EF1000665EBE05EBF50D97A739F37F8C83FEB6D1
+:10EF2000DA20857A8CD99C877A3396C74C2C496530
+:10EF3000AC58F1A7E17815B69695A5503A6FF7B79A
+:10EF40001628620F5BFCE95A1E63814C8B77636E57
+:10EF5000FB713D4EA804EDD2168C6407073266B5EE
+:10EF6000B140DC00C6148D05CC03701CFF2213B425
+:10EF7000D72633B65C61AC19E686F559EF74134BAE
+:10EF800063ECD736467F81910C27C30207E28335B5
+:10EF900030CE8F4CEF8970F889E9BD705E9F30BD2F
+:10EFA00037A672DC5AB14ECDC4FCCFC58047A953F9
+:10EFB000E1E3305F4F9F83B1E923993F121E321D79
+:10EFC000E7D4A85EFE2337E5B440F9E7FB6FCE61D6
+:10EFD00090EE787848524B8CFA32FD437595771451
+:10EFE00034BDBFDA4F6912633ACEE781EA99DE5148
+:10EFF000DD1973421EE735DDE2EB991CD1CF65CEFA
+:10F0000064C253E2E55B9ABBBA193BB442752A1E4F
+:10F010004899A908DB1F0C26156DEDCBDBB90DED6A
+:10F02000F83C55A633D60DD66DD7BE6B11B03BCB91
+:10F0300070BD8CFAED689DA5024F16E6B5617BCBDD
+:10F04000816B6CAC2BF4A7E84ECC4B7AB81C4640D5
+:10F050007AB8173F5D0E74A7F86F71523B3D459625
+:10F060009FCDC5F18B282FC767592EC6323A861718
+:10F0700053743FF67394E9A598365802973861BDEA
+:10F080000DF16C662C7A2E17F8EB21D6C598DD7938
+:10F09000F812311ECC6F63823E1BFB3969F3CDC57C
+:10F0A000F4CACEAD352AD24D9C53D46F61887728EF
+:10F0B000BF1DCB597A0BBB16E07D254C763964FF1A
+:10F0C00071F400F3009C125B0F310F8C9F88F88B5A
+:10F0D00001376B32E7ABBF3356149BEF142A5F281E
+:10F0E000E6B901F8C5E40EF3CB53D0EEB9BEC8774C
+:10F0F0007EC177FA350CCA37FCD1A52C87F2AEBA9F
+:10F10000C784F4E16E667A10E121E02EFBDFEBB4F8
+:10F11000101C900F9573F0E1AA8BE4C30D7F1C6760
+:10F120008AC379FE96797B78B0DCB3D806F927E6F6
+:10F130003BBDCB21DF6D05101AD4CF5E10BF5E85BD
+:10F14000FA6B9D7C9D5D1E628BE3A076EEDA560D18
+:10F15000E5C3B885CD9A0DEAE7D6B668289F5EFA72
+:10F16000ED9A1CA4AB639F5FA33AB0FFAF65FF00AD
+:10F1700020E0F7E14E8E4336B4B40BE267B393C39D
+:10F1800057AEE38FF1FEA7089F55AD0556A896B37D
+:10F190008069282F8F29FE3FA774C37EE32707FBD2
+:10F1A000227A39BDBD74F8789F32C8BF24F95D1941
+:10F1B00099C9D2191BB1C14CF01CB1E1E15B11DE60
+:10F1C00023368CD114A8F2841652345C6795AE05B0
+:10F1D00020FFA6D34CE31FFB7C761705E7FBB19518
+:10F1E000F58801DF9D62FD9B9D5C7EFDC3129B6ED9
+:10F1F0005F6D933B9C9F863345CAD757857C4DEC0A
+:10F2000006F09877F72992AF7F717AA8DF27B4FAD2
+:10F210009D99342FE60DC0A7D99BDE23792FC79186
+:10F22000F5E66C5EB714EB65DDE1ECAF7AB05D4BF3
+:10F230001CD2CFB7711C5FDFDE1D1F5CA410FDF771
+:10F24000F75D1A830F59C86A4A270CD878AADB4C95
+:10F250004301AFADADF928F7A0CBC5C89785C91E4E
+:10F26000035ED6B53AE3915FCEA70F0E087C5E2809
+:10F270001D6E4FE67C03F25F473C05066BC11AF832
+:10F28000BECEEE3F8AF23FCF1E4CC9872AB5E7D7E4
+:10F290009B2710BEA0374FFE2CBD29F4A5D49F6D2F
+:10F2A000E5029F35427FC6D09B3FC6D29B6E16BCFF
+:10F2B000BF1FAC879D307937B2F6E32E14FD9E8CCC
+:10F2C000D7D564187F84C27C386EE289034C89905C
+:10F2D00043F3045F6F1174F0948BDD3621C63A66F8
+:10F2E00009FA3495B45A5AB09F4685E8BFFD7AB9F9
+:10F2F0003C01B998928C7CD605E4A6D25E6EC6C05D
+:10F300004726CEB3F35BFA76249261C91B1200FD47
+:10F31000E7C2474E32E143EF82A984FF80B3EA6D32
+:10F32000BEBEEDE1DF3399CF7F9843EF81F54F0B00
+:10F330003EEB082F8392393E0A93B93DB3C521EACB
+:10F34000C519EBDD96CCE13C35D9C89711F81B9473
+:10F350001C037F520E9F8CF70DC575FFFDE89604C8
+:10F36000A4238927297FA2F115E6B345B41E807333
+:10F370003EB68FD63FB27DB41E0AB70FD07CD721E0
+:10F380001D21BF211D79B89E58D7373C3F49E7253D
+:10F39000627D67E3F5625C4FF43C9D274CCAB9E699
+:10F3A00099DCEA5690FF937527A5FF386A52705E84
+:10F3B000CE564DC17939857E8CD683202E04DDF062
+:10F3C0007EB6A3DC80F1977E39351DF1BC34DF9F1A
+:10F3D0005E05F5AF71E8FE64E223BD14E131C5A11D
+:10F3E0009761FA631CC7F3A0647D1AE693851D1527
+:10F3F0003DCFB9627D00CF39D84FE22816407D78E5
+:10F40000D5197B10442C8000E60DFA2151778E44EB
+:10F410003D96B89679914E53125A9BAC906F7D9859
+:10F4200079D743BE67C063B2A27EBB435F8CE9D28B
+:10F430002F55B23B97E6B3E062EA87DBA1ACB66B2F
+:10F4400090F437F05B24BDFE5ECCE3F7C99C2FC17E
+:10F450000EB92799E3F977984A3B44F2514776452C
+:10F46000041FD652BB0BE7C3FB71FD17C1877F4852
+:10F47000267F42AFA3799E870F1F0DF3E12358FF2C
+:10F480007C7CF8A4E0C3ED22ED880F5F13707B3322
+:10F49000B943FFE3C9587CE816F420E91DF910F5DB
+:10F4A0007DA39827C8CFBFC6A2F70BE0CBADB1F8BC
+:10F4B000329A1FDBFABB40FAEFC8FE1BE23AB7FDF7
+:10F4C000D76CE77897FC0CFCB253F0CBEB825F76FD
+:10F4D000717EE17A399ABFDAF44D2B97138CD525DA
+:10F4E00020FDC879EE97FC13AFBF17C967D24F91C3
+:10F4F000F093F5FF23E8FBA848135B0F30940B0053
+:10F50000B77F45EA8DA704BF048632E217F0B746FD
+:10F51000A25DF9D209B0232167777179306275F362
+:10F52000766475A6D5254C74740CA72B5D1E01CF8F
+:10F53000D87082F1BF8885B746C49BBDBD3D1F8D85
+:10F54000AFBD623D761787C7CF9D87841FCEE3325C
+:10F550009A87C7B43C42CF2B2E45D21973417AD536
+:10F56000A85695D1BC4209E042B5C9539605EDF3C2
+:10F57000DAB7B785DBDB5C30CFAB7468DF37DC1E16
+:10F58000C62779D7ED0E90676427EB26D44F4B73CF
+:10F59000393D44D3FD06B41FFA46E0AB2E93F0B5D7
+:10F5A000D2E64FC3F96DD03C26B4EB362C732A015A
+:10F5B000C263553CD28FCDAE135FC7904359AE8B1B
+:10F5C000B3073C2E2E87725D1720877A0BFC801CB8
+:10F5D000EA85F5EDE791434304BC86BACE6D0F0C86
+:10F5E00013FD5E29EAC790434370BC6839B4D5C6A1
+:10F5F000E110834F8763FD34A73E02F1047C7A85D6
+:10F600002B42AF41BBAB30BF52B45F5167EA4DF6FE
+:10F61000338BF7C6F233C6B9EC063BE50AE13FB0DF
+:10F62000C6EFFFF6DBC18C5562119FE738314FF210
+:10F630002736D41D4843FCC39F21AEF2E062EFBBE6
+:10F64000DD116FEFA80CEDD0077FDF62417837C482
+:10F6500027F6639785C7ADFC0E083205F0F29D8949
+:10F660005289C7798D8B0632F023F20FFE90837694
+:10F67000E5C9FDDF517CE484BDAC04C7DFB18DC7B3
+:10F68000494EBF353505ED7339FE7CC417CC6BB4DC
+:10F69000DAB73E04EB3DB5CBE2457DAB32CFA323D9
+:10F6A000603E95BBCC2C48728AD9B0BE994F9799D1
+:10F6B000772D6D561331AF05447C43394BFE8C27B3
+:10F6C00009E9D6BC4B65C887CCCDCB03CCB6E82CBA
+:10F6D000F89B49434DCC13110F49D6E39927223E9D
+:10F6E0009152E432E4537D9986FA9D2677359467EA
+:10F6F000F87F6528EF3C7380219F5D35CC50BF0BB0
+:10F70000F83B91F9DCC03586FADD964D34E47BD4C4
+:10F71000DD6CA8DF6B7599A1BC4F70B6A1BC7CF7FE
+:10F72000F316F4AB2FD934DFF0FDD2FADF1ADA0189
+:10F73000409ABB039D4C631CFE97352C36D49FD654
+:10F74000327B1CD26DFFD07263BB3AF3210ECF0027
+:10F7500043781E617E0BD299C65A777606B8CF0BD6
+:10F760002ADE10549BD590DB0DF9E18B378A762980
+:10F77000FD605EAB793BD9CFACA0313F47DD4CFC9F
+:10F78000138DE74AD635C9938774A0B2A012C6FB81
+:10F790009C4DC6F60CE35DD06E8E584F345D1C61F7
+:10F7A000558F8C40FA08E8CDDDD3C2EB36B3FAC1F1
+:10F7B00021FC2EE8C429E844AE5FCE5FAEDB09FF32
+:10F7C0006139287C0BD2D98C0685AD51DAAF6F66D2
+:10F7D000E3AAA59D63AC93B1A005FDEDE8F9875CB4
+:10F7E0000E37C5AD72580EC6AD583BFEB0933C3EC9
+:10F7F000B5560D5A81AED540EF28FE30AE3F1A8E79
+:10F8000017CB2F1E01076BBA915FE23CF1D1F436A2
+:10F8100038C4DAC335A1B7918F241C255C1DDECC1A
+:10F820009874E581FF387C75F64BC2F704C2372126
+:10F830000CDF9336FF4994C3A7F77EA312DDF95B73
+:10F8400006A21EEB482F391C234FA31C83FA3958FC
+:10F85000BF3201E46212F473E0879EC86FB29E6FFC
+:10F8600041997714C84545F1FFE08A888B34EBAAAB
+:10F87000230FF035A741F5A21E3EA9D9972997D1AC
+:10F88000323DCE3454D2126F1C8F126F4AE3F6FF12
+:10F8900028002F68E3B760FCB5C86BC3798227479F
+:10F8A000714E05DC9BB309A467E353283EA2338A5B
+:10F8B000FF9D62DE1AE8AFC6F1B74BCE130F494C7D
+:10F8C00021FFC29F118FF6436BCBE967B17BADD9A6
+:10F8D00089E34CF0FB693D43708260573327C029B0
+:10F8E000225E04EDD2B1FD84C7FF9880F6F04B870D
+:10F8F0004EA9A45F3E71933D2CED83F6F67580F41E
+:10F9000097B4D7C13FEA92C2ED985CECAFCD3F12FD
+:10F9100076B5F4733AEA07EC8EDE68CF74942AAFBA
+:10F92000AAA44F5B9578EFFA18FA342F4589A94FAE
+:10F93000417FE6A5A446C4E3EE3CBD13E51DC07BB4
+:10F94000087E7738C0AE512EC8AE198EF51F4D48CF
+:10F9500024BA6EDDAD067B418353364F920BE03601
+:10F9600052E85945031DE20AB7ABB2B9FA6A03B1CE
+:10F97000BC4F128BE1A7C87424D64B89882FC619B7
+:10F98000FDD1A503F8BC8A53B83D739FB09F4AC50B
+:10F99000BA2B310E97128EC3554EE671E687A3E25D
+:10F9A00097A5290EAABFC43EB214D7B3345721BBC2
+:10F9B00069A9A218F6919253F2A9FC16D17F29F4F5
+:10F9C0008DE33DD595CFCB1DE5BF678BFAD929BC1B
+:10F9D0005FE0A43E886F8BAAC684E78C143E7F69E3
+:10F9E0003F49BE192BF8A650C8CBAB7B80BC24E6A0
+:10F9F000D2C78D86F251A29CA96BF758A17C6C2FBF
+:10FA000033433A1B857209E5BCD37CA0A57758CE59
+:10FA100017F6AEDA81E2614C3A7C8F902745CCD75D
+:10FA200019E9E06A8FF1FBD83D85C7905FC7328D39
+:10FA3000FAA1EFB91CAE09AE30BDFF3EA54D1E794F
+:10FA4000CE025F87E2FD0F1663FCE16DD5BB9EB56C
+:10FA50005FEFFD026F2B849F82FB48E87FB844DA9A
+:10FA6000BE3E87CF6B76DFFD044F0DE0097C1BB2F5
+:10FA7000B4D424E1381F301A2773A6DE84F9413E3E
+:10FA80000FC338F1D25C66F7227DF637511CC4ED06
+:10FA9000778EB240DEBD963C1566D658C031202C1C
+:10FAA000179E4EC925F8AF60354D49503F69EDD7D7
+:10FAB000AC2BF90FCE514E9443D358CCB8E646B197
+:10FAC0009E098F77D5D00F4BB2297A30C63A368A45
+:10FAD00075805CD880F2E12ADBFE814AD7B05C41B8
+:10FAE0005796FEEF9029B85169DFDE662F781AD756
+:10FAF0003F6826EB20CEC9E731DDE6ABA77A7B3C39
+:10FB0000B43F512EE5F33413D3806E6E126473D379
+:10FB1000DAA6FF903DF0C3D9B3AAB4B319F5CF70FC
+:10FB2000BFA07CAE2388FB07E58DB9018A0FCD54B9
+:10FB3000685FA3B2F13D1FE6CBF3F29C24D7121409
+:10FB4000E5706F32D11997631A3B2CE945158B820A
+:10FB5000FE270BBD20FD79D0032B1200FEE56BD7ED
+:10FB600035654095FF01858F78DBABFAF7DE03FD45
+:10FB7000DE00CA69C1004C35564271F474EAE77A76
+:10FB8000D14FE03BA61CB685C7BDA17137AD67AFAD
+:10FB900099056C404CE6917C68F36F93687F15F48F
+:10FBA000298D3BC956371AF5DC494B6B3F2FFAD7E5
+:10FBB000DB3ECA0E003D7DFABBD30E0678F84C6BD7
+:10FBC00075E0F7A30BDF77E800BF4F17AA4588CF92
+:10FBD0005B85DE90F03E22F07EB9DBB70FE17D5B06
+:10FBE000F58F83FD91719205A924EF670561861158
+:10FBF000F6C39C4D0968D1B4E52BEA530C79A907EB
+:10FC00002AACAC2A565CB0B39BFBF3B336AFB374EB
+:10FC1000F6E0F8FE561CFF28C85BC4CBD1AD8E20A1
+:10FC2000FAB3723E659BFB5BD0BEF8ACD1CA42E82A
+:10FC3000AF68CD6666E77244017AF00BBC47CF73BC
+:10FC4000E7CB09D4DFF487B9DC2985B116005CFD68
+:10FC50008DB348BE44AF63FAA79EC24E00EFE9F7EA
+:10FC60008126F7F0FA0B016FFE05F77E8DF65AF448
+:10FC70003A4B034679337599312FE560B9C037B0F7
+:10FC8000DF32B47BA7D719EB9537DE4FFD97A39CE6
+:10FC900092DF61FDC96E61870E6643502ED5D8BBD9
+:10FCA00026F9CFA1774E548381DA93B1E3D5364A52
+:10FCB0008F56334AF7A5707A9DDBF8DE5D4837F33F
+:10FCC0001A9EB3603FB5C1D1CE6150C5DA081C851C
+:10FCD000F625EE1743D329B85F0CF3ACC18964E075
+:10FCE0007EB2AF9B1BDA9B9D51FBC7627D2502FE56
+:10FCF000CCEE22FA2AC1F5F4C3EFDA3791EB39B52D
+:10FD00006BA00DC7EDEB16F27608AC4BBDF075C9D4
+:10FD1000F5C8F5C9F20A15E82C467B49DFFB84DCFF
+:10FD20009AB661C2D24C0045CDB623E41733619731
+:10FD30006B023F9A7D39D9E51A03BB9BAF53D8E5D7
+:10FD40006C0FF2ADA4B3683A2A473820133B793BD5
+:10FD50009BB0D7DBE8A7F1018287C433F0473ADFD5
+:10FD6000C70BA5E33E1ED0D1A1283A32E4A7D7198C
+:10FD7000F35F995B7290BF815E0E45C2F7ABA8F34B
+:10FD800023321DEEEE4AFC36CDA3173AA17C3AF39E
+:10FD90002D75D2FAEB082E47B5BA9DF720DF6DE03E
+:10FDA00074FF99C07B83DB57EA267DA5F7437D3539
+:10FDB000727186EA867AA52B1427F2D3D4DAFE85EF
+:10FDC000C88703984EFD4DE9C0DEAA7173F89755B8
+:10FDD0009999059465198C8172AD6CAB1AE4712BFD
+:10FDE000DD5E0C789829F05071DF73960C486756E9
+:10FDF00095733B20C8F905E04A76C0EC154DE457F1
+:10FE0000835F1193DFA41EA8A8379657B215848785
+:10FE1000CA287BE0F792CFBCCC8BF4E8BFCB615310
+:10FE200092CEBF5ED63E6E42719553BB7A907D787E
+:10FE3000CAE3E984F5FC89FC0C8DA2F987E07780A0
+:10FE400013E9A3D6450941B47FF79F01BF0E6D3278
+:10FE5000A77F8805E0D2F2AF6CDA6795F429D75313
+:10FE6000695B41F459C98C7E63293828180F2DDD50
+:10FE70009812C4FD71E8BF5F03DA151BCD64370427
+:10FE8000D8FC740674E65B62267958D6904C7E6B7B
+:10FE9000592DDF4729DB9C1C54B93FBE07E31012E4
+:10FEA0000FFB6B0B2C1984A75C2FEA35D66036D07C
+:10FEB000B7C44FB4DF377B59D3CE744FC7718108B5
+:10FEC000FC1CEA003F8722F1B3250A3F6C610A97C8
+:10FED00033B7BFD603F78D4E55C579D5187E84D478
+:10FEE000432C0B08707038BE569429CE3469DE342A
+:10FEF000C4E7E91583085FD1782AFA692AE183FD0E
+:10FF0000CBC130EE3AA51BBB6D227CBF4DE1FC316D
+:10FF1000A5E6EA22D4D76FBAB99C7917E4936E614B
+:10FF2000EC3D904F3AC8A7F7416E61FE83EA74CA70
+:10FF30007F54EDA1F4E3EADE941E12F6BCE41B202C
+:10FF4000000BDA51EF09FDF89E5BFA4177A4A3E9B3
+:10FF500050F4D3FB834C406BA98159D78CCE66EC0F
+:10FF60005ADDA8EF265F6FD4672D6667613ADA7DA8
+:10FF7000F729B4BF50E61B6EA8CF348F6502FAAFE5
+:10FF8000BD0786BF933DE7B14C047EBF695C8AA183
+:10FF9000FEA4659D0DF9636E0FB71B8BBA19BEDF0A
+:10FFA0005C7289215F7A06803010A9D94578B8C380
+:10FFB000C6847FEDE2714F71BEE49BAA219D7E0352
+:10FFC000F3FDE62D339547E343E275DA6A13F3C395
+:10FFD000D4A6AE86B541BF87EA004FD0EE8BBD0EEA
+:10FFE0008674BC74F3C07786427EFF6633C52FF7F4
+:10FFF000D7A6AC44FB68FFE6D4448C8BFA97AAC220
+:020000021000EC
+:100000008E705A5884BC2AA85D44E74E4A83562F06
+:10001000D90B3B024FC8BC4741BE679C5FF6A84165
+:100020008C5301FEB87FFFB495E2F247C16E738234
+:100030005E38AAB05A4C51B12441F9BF9B5383C8D2
+:10004000CF453FA97A3AD2D3D37162DF45A1FE8E64
+:10005000BFD763FD72A22F4F7D88F8D64AFEC0D469
+:1000600016BE3EA60CE88CF83F9ACCF4649844C5C2
+:10007000FC8FF66980A7593D9BFB85A05D496E28E2
+:10008000F5466877628399CEA160BF4EC857FCD50C
+:10009000BA8ECB11BDD3844B23E119EC87EB9E6262
+:1000A000F265A7027D1D9F11EC47F26C612AF155A4
+:1000B00034DC0F59FC04DF00F28112968F613EE3BD
+:1000C000FB6920D43250CE4C357BD3503F1D5A6152
+:1000D00026BB13F447228E0F9C4C747C48F314E229
+:1000E000BA0F2DCB6528AFE4B8652B54F23B90FED8
+:1000F000A8FE2AD50F3602937A2AB04CF1B34EED02
+:10010000E9E6D7B70FE984EB89B66F65FA15F0AA6F
+:100110003FC25E98BD4DF5A1FFC1F25AB4EB2F8DE1
+:100120005C472DDF5F48E7FDDF21E4FADCAEAFEF8F
+:10013000B39B50AE774B42BFE2D81E95E8EC58D740
+:10014000BAC1E9DDF0B8C8AB837F03F92F8A038712
+:1001500035C83F61F55F930AFDCC31ADC841FFE87A
+:1001600064E3C195C3A1DDF167CC5E1C76F6D3B321
+:10017000BA50DC5DD8D7EDE55628539CF3C9500042
+:100180009E733CF5A4B73D9B61105A7F90FB49429A
+:100190008F3B1F52D096620707399663DC622AB004
+:1001A00047A4DD7DD0CCED8292542EA7A47E5F23A0
+:1001B000F2534D9CAED9CB0AF96DF067D003522EA5
+:1001C000CF49ED4AF5DBF432AB27793503CFB1C027
+:1001D000FAE66EB20683B9D4C6897C3E8BA3873D0E
+:1001E00095EA213936DBF2CC23C843E5AC99E67DAC
+:1001F000DC1C9CD19C8BEDD7D5BAA8BDD94BF15353
+:10020000A14F6CC040288FCA05DF55D429C110F119
+:100210000DD78BD345FF0CF54C84FC6AAF578CFA95
+:1002200064BAD0A3D35954FCB5CEA8DF7C09DCA9AD
+:100230009D0DE3A2BE0CCF0BEC6380D90C7F70E761
+:10024000789AB7E20DC69847396B0DA938EFCD3CC7
+:100250000E1F3DAFE8755CE83C6778278C4ACE8B73
+:1002600018376ADE12DE14C08DC08384FB8C0087D1
+:10027000E78C4685F0F5B9B0CBE08FE2C612EFE52A
+:10028000CC371ECFD7953F04F232374C076D7AFF3B
+:10029000B920ED377CC1EA12ED40F773573F37E9DB
+:1002A000726CB7F63DF22F4A5CA11EA664C65202DC
+:1002B0007B96175D11639F21CA3EF8A5E083B3D7F3
+:1002C000068B76008FE91B543DAE9FA11EB597F6B5
+:1002D000C1CC40C08271C99922DE77BE795662BD19
+:1002E000011732DFD8F6CCFF75DE7B5285FFD4CE06
+:1002F0001EEA11D38F6AB383CEA37F3F3187B251F9
+:10030000FFB6666BA47FBED1BC1FE5BB511FF720B3
+:10031000BFA023F93A43E8E1E9A897213DBCFAF9E7
+:1003200044F4DB3F7FE879DADFB43C333D11EDE2A2
+:10033000C3ABA7AE0C004B1DDE3C95F470F91AA9B7
+:1003400087FD9648FD5EB0BAF4CFBF43FADC144790
+:10035000F1F9193BFCC2EE0679877270359777EC9C
+:10036000212E0FCB515FF5257DD50BEBDD35C3DF9E
+:100370000BE93CE23BE9B1BBA6FA87507BE60CA156
+:10038000DF05923384FA4AEA53A9673593DF9486EE
+:100390007A407DEB83BB61FD5F6E51C9BDAB50D729
+:1003A000E53831EEDF81DCFEF9F036B5C13BF7020E
+:1003B000E05D86F026FB87C3FBC0320EE7832B3857
+:1003C000DC976EEE9688FEED8165DDC8EE39B0B93A
+:1003D00007C17BDA728037D9BD1EA3DDB30CE08D77
+:1003E000763EC21BC62DDBE111F0F672782F137A30
+:1003F00067054FA7B5836BE056942777FDC5EA459F
+:100400007D7E342E948AFEC8D1E75486E70EDAEC5E
+:100410002261BF4838FF9BD53D8176543B7B669572
+:100420009561BC72D60B8E2083FC7125BF1322E030
+:1004300044DDEB89385E78FC363B66705AA41D7348
+:1004400081F899C77C742E7F5EE3EB7BD18E577465
+:10045000EED7CFB3D943C8B7E0EF9C8894E78A07BB
+:10046000651AC649BC361BD24116F3F8C8AE91FBDB
+:100470003F7E86FB3FDFF6F8FAD6F9C4CFAD3D23C9
+:10048000F7492AE343668C2FB53EA710BE2BEEC872
+:100490004FCC67B8BF5445F3B82E8DEB6345D729D1
+:1004A0006E6805BA8987F126A579F8778F93C71109
+:1004B000D7C2B88EF07CA3BF8F47D2437D6E8F1D0D
+:1004C00087AD15E354A826F23BE65AB8FF21CF7753
+:1004D0004C15E553D3B8DF3E2B8D9F9F3889F17DB6
+:1004E000E8F7E4AA04715E7914C533DBE227126EE3
+:1004F0004EEDAB3679857C25E207FBB00DCC739AC7
+:1005000055C47341C562FB5B44FB5BEADEA6FD3567
+:10051000F05C1E47BD3B6581D58BF66B609B95E813
+:10052000EEDE78BE1FC2DC491AF2D1CD42CEDE52D9
+:1005300077BF0FF731A7D425E898C2380126E2A784
+:1005400079B89F9A69A1F86989ADE51974B36F4BC1
+:100550003F78A70D96B6C8C4ED96452E46E7632EA4
+:1005600003B31DE3B17874E46CCAB9E8C7181F9EE1
+:100570008B71DA618C13D65082AB210FF0A5FC9AF7
+:10058000B4D1631FCA62EC9FCC7329E27B2EC206F2
+:10059000E9A13489E200D762BCD885A946743651F6
+:1005A0006301134F9761684DC68FC78B75DF309419
+:1005B000859260BDA1DDCC10BFBE31640AF5023C5E
+:1005C0005CAB859A90AE4D368F19FD015F9132007C
+:1005D000FDE4B98B2F6CBECFA4F968BE734DFC50FF
+:1005E0005FEBDD4A703DC0E9166072A4CF5B35B6A3
+:1005F000431DC0F187F457E9F204A8DEED9CBE6507
+:10060000DC5CE2A93F741F09DF5BC4FCA09F658925
+:10061000D8DE123B7EF4529AF483B9BD3947F0EB31
+:100620001C496F9B8D7CFA31F20BD457D0AE05B8C4
+:10063000DD22D28EE8FD43D1FF8769DCEFDE7191C8
+:10064000E355585988D6BDCD4A7894E35E2BD23D08
+:10065000693CFE26E721E999893894092407D2D11B
+:10066000A1BA1AB29B6646C5815964BC4A8D956F82
+:10067000933FA6B3985A5AA7E17C942BE3BC48D782
+:10068000B758EA7B54D9DBD793FBB125ACD9CCEF73
+:1006900013897896D057A3557B6FF4774A94782FB7
+:1006A000DABF27F31D015312C65BCC84DA12A00710
+:1006B00094CF9FC4F1FDF72949778D47BBB024D172
+:1006C000A2617A1B6B76E4E686ED92A5F930D94CEF
+:1006D000A4B2C0581DF235284F78FE7E3D8BA24350
+:1006E00022BFE44DDCB7B8FE07C03FE5978ED54189
+:1006F0005E9C7C4D94B37BA9FDC925828E03F78F48
+:10070000C5FA271F96E575BCFC3E59FE10CF3F2069
+:10071000FB17F95551E58BA2CA1FE379CBA30F8DC7
+:100720000DA03D2BF6634A8629244F0A059D952C82
+:100730000E117C4B4CAFF274240BE17D89F3D51B79
+:10074000D0C957887A4B751C72A0DEBE3C432F443B
+:10075000BB6340AA3FB913A4B32728010BCAC93D04
+:10076000C19E42AEC73C675D28E8F6B274DE9F8446
+:1007700037F493D929F5E2FB7919E735C8D04FB79B
+:100780009FD3CFF2F6F3E9FB73FA3919D58FB48B07
+:10079000EECDD4C7209CD821B7E1FCDC9CDF7B9355
+:1007A000D0AE62787E0E403F67717DCE40E87FCE4E
+:1007B000B32FE5CC88F0BBE79D31311DECA7CA33E0
+:1007C0008CD22F9A3EB678603EF3B636590AA15EB7
+:1007D00025A40511F39A2BCF8FB2166D62845E1F8C
+:1007E000D7C924CE25AEA2F9CE79F618ED5BCE316D
+:1007F000D51F5E83F19E613CFE16BDBE3CD16E1FCF
+:10080000EE23C7B0DB2776E27AF8AE2C7D02AE731A
+:1008100020CA0C480B6A62EFC3FF49F45712CFE5B8
+:10082000DBD4C10E9BE732DC47F5D7E0BDAE196BD8
+:100830007307601CF786D491B710DC3A8C8BB6F244
+:10084000B868238F8B96B89AEF00E1CD1EE9B4F516
+:100850007E1BF871631F957C062C0B6D8BAC32FFF1
+:10086000E6D8515914E7A2FCDD8FEEB83F00FDEC4D
+:100870008AE7E70CA60CB9341EE5424B6E82C90923
+:10088000F2E25677E923388F2943AE28C4EFF956B0
+:1008900047CF521E5727BAB8D5EDBB1DE905EB630C
+:1008A0005CC36FE1712EFF1B2AC5B9FCFD12FCB1C0
+:1008B000F6A92B3B71BA79A49393D25D8066B43BC1
+:1008C000E43CE4F860A8DCD10CFD1D5A9CD11FEF7C
+:1008D000CF35B8F31F26B888F11BDCFEC59897E327
+:1008E000C372FBE1F70B9D47B5C0C7C3026FBE11D2
+:1008F0002AD323FCC589A3120CF9EBC7A5303D32DE
+:10090000DE7A7D67437E72493743FD9BA75D62288F
+:100910002FB636E7555D84FD5BE970C4A31DF6690B
+:10092000E3BF3FBC05EDBA0DAA5781F5CCDAB6F1AD
+:10093000C3E150EB141E2FA5A0A787E25EC7F15CB0
+:100940001AF29EA66B91FB355FB2663ACF17B11FC4
+:1009500060D87799E3DC41E7097FA9FD9AAD9DC492
+:100960007EC0003C8A8CFAE8038AB3CDB3F3F57CF1
+:10097000F9D27E0BDD0340FD01F43D061BAAC8E75A
+:10098000018A431734ECA7FB56933A71B93C2FEB1D
+:10099000760D2C32560929CAFD42904F49401FCD91
+:1009A0004DECD2AD780E37D741E7262ACE4C642CD9
+:1009B00005E928D0F776A837675911E5E79D89A79B
+:1009C0007EDF559B0BE9BCF58B0AED1714779EB2C1
+:1009D00018ED51ACFF6B18AFF8BFC714217CE66D62
+:1009E000E5E72B8AD57FE6613F73EB8AA87DB1CA24
+:1009F0007629601F8C2DE07AB618753BE4D5C18E40
+:100A0000E5A85F554BA8E79F509E581C244F92CEF7
+:100A1000DC4CE3579EB151FB4F84BC30B7F0798D6D
+:100A20003EE3A3EF12EF073A7535DC0F34A76ED023
+:100A3000CAEC589F51FD6BCEFC8A52B9CE377AFF73
+:100A4000C58D72CC9CFA4D219E277DC3AD38C9DC83
+:100A50008892B7A7AB8624B118F2A86D9C33FC7CB2
+:100A6000B2F50C3FAF7C20433F837C3D7E618B869B
+:100A7000FB37CC6E7322BCC60FEDEF9911C147EA6C
+:100A8000AB3759102FE687DEB3A07EB7425A10511C
+:100A90005E21CFE347C9E39FDAE4F1224AA57E61F4
+:100AA000E937913D7AABBCCF2AF8E40B212F64FBE8
+:100AB00066A471C4E30B56F29FBECFF027A7433F55
+:100AC000CDF96CF216928FCD39B86FF24BCD1FF085
+:100AD0006C53C8BE6FA1F3FAE3877A4CB81F9096A7
+:100AE0002ED7C1F9F57CEB50D3F93ADE55D902EC9B
+:100AF000F7DDABAE6AD6A1BFA67B060E44B92FC701
+:100B0000ED956EE1FD3A5B7F407FAEF2E5040FF2BA
+:100B100075313A4779613B16BE338CFF55BE6C5D2B
+:100B20008FE7682A13C19F85F10B5E890B211D3762
+:100B3000BD12A7A17E782ACBDF0BE153F04AAF515B
+:100B4000E8BFE98D568DE2079DF4DEE9833A9EEF1A
+:100B5000F9E453349D49BEF42FE3FC522AE8B44C27
+:100B6000F09F5FF0D1E9AA4EC487A717C2A4719F76
+:100B700073A172E956B4073C0E3AFF23F9B218FD8F
+:100B80001EF85E7C4932F97F117C477C38F78C93E4
+:100B9000FAAB38E3117CEEA2BCE4B732C12F566148
+:100BA000474C13F43D3CD37F633ACCBFB806F81DE5
+:100BB000C6F12FCEC8433E0AD38BC5897405F49283
+:100BC0003E23826F6A9A6E62687F58DD3EA2976903
+:100BD0009046DA1FD3DBEC0F67611ACC7B7C6DAEDD
+:100BE000E1FE4989C0FF85D2FDD582BECAECA11EB7
+:100BF00068AF9AABE2BC789FEE949BEFCFCCBF8FEF
+:100C0000C36FBED95780F6C3FCC7142F6086EC0AA9
+:100C1000944783F7565922E38D379DE9C73C0087F7
+:100C2000EBCE74A7F48654FF6C8443E99949025EC5
+:100C3000FD7ED63EE0209DC797CC41AB771DEEB33D
+:100C4000C5F955C4EFD16CE67C3022BE84F1308CFE
+:100C50008BC9FD41196FB2E27E6A849EFCB756973C
+:100C600083FE4EBBB853BE711F6D6ED33F079BA072
+:100C7000FC78AE4EF1A729267F2DD2F3EC89C1670F
+:100C8000CD909FF3C0F38918EF96F0ACD7423D505A
+:100C90004FD6031C310E56BF422D0A727B2681EFC0
+:100CA0007F71BA96741C4DDFB3CF74257A3A5D65B7
+:100CB00025BD731AE89545E81DA96FA47C977A476E
+:100CC000D27385C6E556853D89CE5584F5CD041F82
+:100CD000C671596FC5DB8345EA9BF52B8721FD9FC4
+:100CE000747BF1AC4F34FDBF589D4EE76CA41E8958
+:100CF000D637529E4BF92EF5D5DA0CFF8B88F7913B
+:100D00007FFDFEF97FC1A76B34AEB7AED11C443F67
+:100D1000172E37F70BB9B9DF2037E77520F71BD34C
+:100D20002F4EEE3F2DF805EC57B20B51AE47F6F7BC
+:100D30007DC6C87711DF7BD2793CE0979A7747F27E
+:100D40007E4F1BFF5E98BC6F12EB3D9FBC3F22E4C1
+:100D50007DB47CC70B6D28DF4F6EEB43FBD3FB18D4
+:100D6000E803D47B8D099E8D42FE937E884F0A9EB8
+:100D70004BFEDF9535F54807F2FFE8FF45FE4B7A5D
+:100D800094FC22F943F24334FF487E187B3FF87FFE
+:100D900088A777F9FDA90A2DB099F60F3D09FD91B5
+:100DA0002FDBECB6AD0AF1593BBD20F826CC274627
+:100DB0003D21F942F289E48F0AC10FD3A3F861BB48
+:100DC0005AFFE03068579DE1CFC81814E68BB95B35
+:100DD000A2F542877485114336DD5DC590AE2A20A9
+:100DE0008DA42B6B07FC90937171FC60CFB8307AA7
+:100DF000EA9FF1FF9C9EFA67C4A6A70119BFA03D18
+:100E000071BAEAA33CBCCF743A0FE46C6E98DEC6AC
+:100E1000BEC9B8BDD08DDBFDE037D2BC7759B22951
+:100E20009E33F62C3FD72AE952E259DA01D3453CEA
+:100E3000615EA66F52466AD85FB8503C5BDDCD1646
+:100E4000F443A6431AA9FF3BB2776FC9B848BD9FC8
+:100E5000716176E2DC0C7EDFFD17B4137F83F088CE
+:100E6000C62B73BA0C7108D07FD791FD16D2E888D3
+:100E70004C877EC56A0E67995F12D2A4BE4D417D34
+:100E80000BF4B200C7FBB9F4525CC0443C70D738D5
+:100E90007D04E0FD0F22CFDE1A877C3869A82CDFA5
+:100EA000BD42D750EE301947A7B8C8BBAAC807DE65
+:100EB000786B14AC7FEC832C1C6787F2D12392DA19
+:100EC000E2280A0BD77FF4B1D7DF5A4178E6E75E14
+:100ED00098BF45E3FB4C229F077947447E68547EC8
+:100EE0002DAF9FA8B5307E4E31C8F955C5AD374EF0
+:100EF0003FBE087B04305988E709C66F559C180728
+:100F0000B979C449DA8F0DAFFF9FE3303E3BAF5153
+:100F100011F90FDFC2F5DEBC95E7B73DF6AF15015D
+:100F20004DF497467132FA33D72B3A9E7F983B5453
+:100F30000976CD6D0FE76D1946FF06FF34637B869A
+:100F4000E7EF2EA63DE299DA77A5F621EB458C7FF7
+:100F5000E388D8F712DE96FC25E209D43FC0F2BA46
+:100F6000FAD8F7243E10F59B71DF84E0757205D244
+:100F70004FB345C2F3AB1508CFD18CE73F7BECAB49
+:100F80007181BE7CFA7AD4FACF35FFA60CA3BD805E
+:100F90007F1E63FBD0B9E0F77ABBF6827E661AE962
+:100FA0002949F3ED380DFD2481FF8F76F13C5FDC9C
+:100FB0000AB4FFC3F4F11FA28F6619CF6F47FFDF9A
+:100FC0008D1B6527FB47D4FF6105CA379FA9AD3E3E
+:100FD000E707495FD0BE377F9F8DDAFFE7B1EF5754
+:100FE000207C003F544E79ED1CFC501F951F11C50D
+:100FF0003F82FE897F51CE037C7AC49033E9999C6D
+:101000003EBE14E7AA9B47723BB159DC9B1A9AC9B2
+:10101000ED424F2687636F51BF393E020E1178862D
+:10102000BF10FA2111EB2638DDE496EBCE2A1ED74D
+:101030001DDABB78F980CCF4070259E17C747F7922
+:101040009959C5185F0DF79FF936C2F52601B7A16A
+:10105000999DDF0E7079A8205F561081005D6C5558
+:10106000022AFA09481731D6CD32DBF15520AABD44
+:101070006E3E477B4BFBF67A547B66CEBB98F602FE
+:101080006FE3A2F05A1485D75151F912990F1AE45F
+:101090009F948B650DAB96A4B9312EA9D09DCF300E
+:1010A0003DFFAA18E9798E53D2EF2504D7303DF7DA
+:1010B0007D1BE5FFC47A290F2F7D4007BC4D407989
+:1010C000382C9CBF0EE505E5FB15EB4991FAE2B221
+:1010D00007507EDEB84CD6F752FD9B6B657FFDA9AD
+:1010E0005CE291050614135EF384BE080C7C1BCBF6
+:1010F0006737F2F673D6E4BD1DE87E0E7EA88B82BC
+:10110000CBDAA87C20AAFE43E7D12FB551ED1746D4
+:1011100095AF88CAAF8ECA2F33B62F9DA6101F96E3
+:10112000023D2022CEC797F764B6D9A96DFA54B113
+:1011300093DD66E0ABB1353CBF644D7EF1B2BE11CC
+:10114000F9CC82E248BE90F77BAD6E467C61EE4002
+:101150005EFE3AB30379D93B5ADFF2F2CFF09F1922
+:10116000B4BF63B00BB6ABC67C932AE73DE1ED3B61
+:10117000EC11FBA0CC578CFE41C7FB2DE38B474500
+:10118000DA2581E262A44BB94E59BFF0C7B32A8E6B
+:10119000F7A7CCE2E20DB89F3352EC43BA780A7A53
+:1011A0004D45BD5929E23185783E16EBC5877ACC8D
+:1011B0008FB443587D4F5C67D33DFCDE40A006F002
+:1011C00083F135E6B5603CA5292969C193507FFBC1
+:1011D0003DEA02D4A3FB16A4D0B9A43399DC5FD8AE
+:1011E0009ED4256D3AE49B126EB3E0FDE4A67B47E6
+:1011F00053FAAAAA2F6D055E7B694D49B1BD0F96C2
+:1012000027117C5EC89C5CBC08E8BC012FED407BCC
+:10121000BFCB9986F71AD87233E3EFE5789F20BAEF
+:1012200079C0DA1FFDE7D24597D0BE55D9C3130A5E
+:10123000E9DEC21233ED67C01F9D3FF12F1F4DE75E
+:101240009EA6D58A343086D2577EFA4B4D22EEDFE9
+:101250003FAED07D892BBEA97F13DFE5295FD6CDB8
+:101260008BA87919EC7A3C8F7460752FBA2771308E
+:10127000AE8ACE7D427D86F5CB7FF0BC333E0FEB50
+:10128000AB4E3C5A7118BEA33D7CF83E75BD82F34F
+:101290004A74C4E379E9C33F7ADE41BB16CA9D8B29
+:1012A000E1FBE125B3D2D0CE3AAC78121558FF0756
+:1012B0006B6617A767E0FD7AABC0E76C4729ACBF48
+:1012C000D4D4462FA43F6624F3FC0799B38B37C2CE
+:1012D000FC0F3FD68BCE7D8DEBAC7F980970CAC8D2
+:1012E000D23FC2F4A0B877FCCA4F7CBFF01F27CA18
+:1012F000D2305EB75FF0CFCB67CAD2CA22EC9D195D
+:101300005F6A84F7572C9E3B709EAFC4672B743E78
+:101310009BD5A760BC7B9AF03F807E173C1FC3EE35
+:1013200069CC54A9DFA6FB5347205EC3747C37C940
+:101330004FF21B207F6ACD9DA4D70E5917B083288A
+:10134000B7C4F94586AF0D21FF6D8E0BC6E562FC73
+:10135000532FD4C98FA9EF39D111C177A2FEA701AC
+:101360007E3EF753A88FFEDBA781FF7144EE43C892
+:10137000FAE5898E001A13471C0E0DF1B04FAB3EF3
+:101380008CE7FA663C6E26B93FE3F1D485AD286F51
+:10139000805E303E16BDAE2B3B9B793CA2233E0CBB
+:1013A0002C35F2215B7A4E3EB4FF69C939F9B05C45
+:1013B000F829858F9BE99C7AF9208786FB8F231F6C
+:1013C0007F6D23DD5BBD3D6E00DE4F287FDC4AF87C
+:1013D0006A7138024EDC1F4D7468C9906676E6F873
+:1013E0001DDE99F34D81CA34DB004AE95E82DCD709
+:1013F0003BB6E0C147F018E571169C3404E0770A6B
+:101400001106703925EF6545EDF355EC7EDE92CF80
+:10141000CEB1CF779EFD3DBCF18C7C78A1FB7CFDED
+:101420003B8B73AE6DFB7CE69EB88F582EF6F90AA7
+:10143000D6F2F35BE50BF83B1C05293CDE7BA83AB2
+:10144000808FDFE27A034EBC9FFB10D72FE54C095B
+:10145000DAE09F63D6DE4EEF933E2DE44A29BEA329
+:10146000D517F9C59B837EFA8CC7E308AEE54FCC50
+:10147000FAF03168D7B2A8D81DE9178FE96C9670D9
+:1014800065784F57F67364D1EF7290EE0BFE0CFE49
+:101490002DDEF74B66CFDE948B78CAC8C1FD485964
+:1014A000AF7CF13D3D793DF08FC10F2EBD4FE5F78B
+:1014B000A65FB092BE031E4F6711F799A7D5EEB68F
+:1014C00058FA86EF7F1D803C5EA98FB80766417889
+:1014D000C97B49F8973E58D8DB1E921FF4BE70892D
+:1014E00049A1FB4B20B9E8DECF9D9DF97EE1ECCE12
+:1014F000DC8E2DCDF1D2FD978A9556EFE25CDE4F62
+:10150000DBBD6A3CE7646A9E41FB8F7FB3525CA4FB
+:10151000B2364E8F4BE4E722B6F4A573D19A05F7A5
+:101520004D3C5C4EDC29E8AFD233610CD20B94EF1A
+:10153000D5F01C9683CBC38A64F1FE1BB437C13847
+:1015400027F15FDD78BF19FD22C657C477E8C7933E
+:1015500018EE7797892DC3B80BD6EFD30FE19832E9
+:101560006932CEEF1995F81816BF7228DA77CFA82E
+:1015700003D1AF2DBD6F7BE16ACC3FD71F6F2CB07D
+:10158000D267DF277D3147E0BF459C072B833CBEF8
+:10159000AFB6B233D7F77E95C77B560A38493A9033
+:1015A000E515F7F1F350154BAC64BF542CFA88FAEB
+:1015B000AD7034A7A1DCAD78C14CF7985789799705
+:1015C0002DCA1EB117E8AACC9C44EF48CF0D145B7E
+:1015D000303FB74EA17CB85D6A0ED2E917B52F2611
+:1015E00022FD1C8C0BF5403DD47A7B9C17CFE1C9C2
+:1015F00078DB17B53DD6635C669AB3D981F791A6BF
+:10160000DDD1CD85727B9F3364C1F27DF5B926CCE7
+:10161000EB4EE708CCEBDA6594FF429C3BA13FA47C
+:101620001785E379EEE6ED96AE30DEDF047D7CF9DA
+:10163000CCFB3D514F55E434F7447D0274D0B333B5
+:10164000C2F96985F4F0BCCDFC9CBAA48379480743
+:10165000C077B3051DCCDBFAE26F901FE621FE07D1
+:10166000B4A723A0D31DF47DCBBA42C6DBEF403A2A
+:1016700091FA0BF2B56617C6DF441EC6C1FC8B0893
+:10168000CF542A1FC5CB037DF939B7163AB757296E
+:10169000EE2BB6C9A70EF0BC47E0B16C9195E4ED16
+:1016A0001E81E796FB5E48443C7EF9CCF69DB84F20
+:1016B00052B105B4B427065F08B854221C12691D44
+:1016C000645754E2BA13C37068A37FC18F958CAF7F
+:1016D00053AEBB52137090E5A2FD07826EE6320155
+:1016E000B7ADBD38FF097E437EA67776C4FAFC2EDF
+:1016F000E37BE2DF89F51D147A612ED005DECF622F
+:10170000783D51CA0928FAF2B97514F791F892F3A5
+:10171000B66779A4BCD3935D613CB69862BFA77CE1
+:101720005AC06FFF924E390D00B72FC0BFA273038E
+:1017300040AF5AC478926EE478057F9D700DAE1765
+:10174000FA0F61FF72DC7D81040DFBD9C7387F2061
+:101750007DA2FC947C595033E59AFE78EE37F0A5D3
+:10176000A35B5F5C2F1FDF9EC5CF2DEB6827407BFF
+:10177000BD41A1B8F37EE1CFEF5FF2626259049CF4
+:10178000E2B338BD4B3AC33F8C47C9F9EE72F1382A
+:101790006EF4BCA51C92F32EB8F7C66BF0BB9CBFD1
+:1017A000A457499F128E924EE5FDB7687A255A9349
+:1017B000FA5335C87BD28F63B2BEB6F8EDEDBF47A2
+:1017C000E7A51D74509CDF6E4D653C5E5F9BBE239C
+:1017D000F2BE0FFCD923F54E843E59A145E813A96A
+:1017E000FF2BDD3ABDAF322F8B9F2B39CEEA2DF97F
+:1017F000D0EFDCA3CD85899EB0DD79C5372115DF1B
+:101800003599BB959F3F93F09E7B6207D17D85B84C
+:1018100097547ADFFBC54390BEFFCB4CFB31A54B01
+:1018200046D3FDE3591BA70E46FAC1FB0C28CF8F08
+:101830006D1834903FCBE54C9B84F71A363C38E961
+:1018400066F83EAD41F5925C877E905F4BEF1CC819
+:10185000905E0EC6B5140F437BFD6ED589F6FAF087
+:101860008D831662FDE18E2EC9B81E7D430AE57593
+:101870002D89F482B473E5B9BC1A33A787C9599C82
+:101880008FAE6D4B399D15D4D4F4C4FDF3D675716C
+:10189000F49E518945DCE3DCD689FC894A0B5E293C
+:1018A000A47BA16487CDB4305B063FEF6CCB80EFA7
+:1018B000BBCDCD77A2FED87DA7A33F9DAB577F18A8
+:1018C0005CC6ED67BE5F98627C3F48CEE346317EE2
+:1018D000747FB2FD2E71DEF8A098FFB1DAFF9A8412
+:1018E000FAEFD8A61E2E5CF7916D71740EFF48D4E6
+:1018F000BB8C177B4F0BE836EA1ED4627E6F20CB81
+:1019000068BF493A3FEF3DA54FDC51FB01E73E5F21
+:1019100074A29AD17DEA4BC1A7C0F6A3127E7C1EA9
+:10192000CFF5CDA8B33AF13ECB21A47B3ACFA3F2B9
+:101930007BB736CE07879EEB1F44BF71C627FC7E60
+:10194000D18E55F7D2B982E96057E251AA363BF9F8
+:10195000A15593900D4E79FD4B33A0DDA94DFC1C94
+:1019600044BB770B763FBF33F2DD828BB58F2FD42C
+:101970002E96718587B38CF7C0245CA57FF40AE0AE
+:101980007FE880309CBEAA9E4976F1896A3FA527F0
+:1019900095FD2B8723DD3A92E8BCFE3F1A1E54F1D9
+:1019A0009D958AADFD7F40FF76983DC989FCFA552B
+:1019B000F502DAEF3C515D4569F8FDDC20A5576C76
+:1019C0006DA2765F350C6CC47BAE2FDB9384BC8F2D
+:1019D000DED7E178ECE8FEAE5CD7F1BB393EE5BC82
+:1019E0008F6F9A9A88EB6AFA534AE3E588C7842492
+:1019F00027DA77E5E29CC7E1D5DC7E3E6A4B7A7256
+:101A00001C9E0F597B5D1ABE8333BDE9FA49F87DF0
+:101A1000C636C58976BF77DB8444F4433FD75A1274
+:101A2000F15ED3E7ABE57DA820BDD33AAC88D1BE4B
+:101A3000D3B090C63CB97C8B19E9E4F2131ADD3BB4
+:101A4000FD02F7A330EEF1433CC53D98D8679AFEFE
+:101A5000128F97B4F9B1C28F1B2ED6DD8ABFB39116
+:101A60001AFE5E30947F3FB2F6F9F1D8DFB10D6611
+:101A700027CEFBAB0DFC7D86D9E07FE1D594A39BFF
+:101A8000B87F33BB5E217FF8D826D0CFB0AE8ADBDB
+:101A9000CD3ABFAF69A4BF0228C7738D92FE66EB33
+:101AA00041A2EBE8F73392593DDDEBFAA5E8F1707E
+:101AB00096F13C661B1D76847F0127E45BA4438975
+:101AC000E7D9ABF9BEB9ABBE7F3ED293C47BF4BBC2
+:101AD00072351646F71202A6787AFF7782DD6356D2
+:101AE00060FDD7B95B46A1F89C98CDF5B85A60D295
+:101AF000F11E1AABE1F7F3DBC98F2C6E0FD56433FF
+:101B0000EABF73363F2F2CEF63C91416924DEFEFE7
+:101B100025B8FEED812AF6C76BC76B30FF09C35DA0
+:101B20007776F3028A1E5F3E5E03BA9D30D0F5429F
+:101B300057C8A765DFC7F397B9069921BF68D1FDDC
+:101B4000E347E1EFB264EBF1D911E3C87EE1BB23D7
+:101B50001BE6B133C5EFC4B4D2C2EF479D545AFB64
+:101B60002DC80DD77F4F61FBFEA184F32D6646EF94
+:101B7000C074C6F90FEA38BD255BCFE0E31ABF9702
+:101B800031B684CEC705F8FD16F8F3D9D2F0FE11B0
+:101B9000A7A73279DF6599F1BE0BF3F2FB57F21E6E
+:101BA00092BC67D4277C7F6AEDC5DC9F3A6986F5D5
+:101BB00026B5BFCFA634BE4EEF61D504584B1CE10D
+:101BC000C1787FA52281BFD337FF852F772059CDDC
+:101BD00092F60A2ADBC1E1FBFB2C9DEFFBDF29E833
+:101BE000F04835EBDE1D58F9DAE6E6440F4CF6C452
+:101BF000F8504FE46F8FD59F8FF03FB2B6266BBE83
+:101C00001BEF7D5ABDE3A0FED120BF573957D89BAB
+:101C10006C43AAE073357415D4DB95DB87DE6F184F
+:101C20009BCDF5F289DC500EBEA713C8E5FE0DD49E
+:101C3000A3F36B458BC7A462BD13CFDDDB7D3AE018
+:101C4000CD8AEFB7B9286578FFE96A3BBE854CEFCE
+:101C5000BA3195F66983FC9D31A897887ADD3335D2
+:101C60009DC7D1F9BD39892709FF76788129A03D23
+:101C70006AB23133CEBF0F5BEB447D21F123DF31FC
+:101C80009DFF028F9FCC575A6A5330FF8C42E7DF8B
+:101C90008ED8F8BD9EF67A6EA305413D73ED54C310
+:101CA000FB3CF2BDD05F3A0E343F5BC897FEAC7F81
+:101CB000E47BACE5A2ED68B5C483EF49CE4FB5D166
+:101CC000BB1DF31FEF46FA041C6116598FAD4D2161
+:101CD000FA589AAB129C6735307A77A7B82193CE21
+:101CE0002B8E6B70519A78269DBE1F7BF2CD3C2EB9
+:101CF0007F381E8A9FEA44EF47173FD56B24FFD1F8
+:101D00008176EFFFF07793ED36BA473B7F37D74BBD
+:101D1000F36F50293EC9C4FD709F988ECFBE8CE2F0
+:101D2000393E16FB1D589F7C0756379FF31D5809F7
+:101D30005FABC04FF4BBB037EC1E988E7EAA7C1709
+:101D400056BE63D72CEE6D45BF0F7B6F6221BD0F72
+:101D50003B59E77A24FA7D582D10E745FBD69C6560
+:101D6000E7EF35F8A3DF8B6DD170DD9346F0F762B6
+:101D70006F981CF12E02FCCF3CE26B92D3E611ED82
+:101D8000DE0732237D5B7DC6FA5B24FEFBB03EE7B7
+:101D90007C8F37CB42EFBC69F85E35E42789F77852
+:101DA000D18E43FBFC94CEDF95B3C6F37537B3BC3D
+:101DB00074E4FBFFDFDFA13EDFFBD3D1EF4D47BF74
+:101DC000333D70D71F0DF941CD6B0CF587EC5D6F7E
+:101DD00028BFBCE56943F9F0A35B0CF92B5AFF6EF1
+:101DE000A87FD599570DF97CF6A6A17E81ED7D439C
+:101DF0007EB4F37F0CF5C7A41F34945FEDF9C25095
+:101E00003EB6F769E37A34FF59D487C5DEEF0DEDAE
+:101E1000C633CF1FF01DE71BDD267AAF43C911F68D
+:101E2000B5A0BB1FB384DEEECE72507E8D564784C4
+:101E300088EE1A14E2F7683DA67DE1D3311EC75E35
+:101E4000E4F7BF92C0EED322C64BD66DE01086F306
+:101E500029454E433ED5976EA8DF69B2C7509EE133
+:101E6000EF6D28EF3CD36BC867570D35D4EFB24008
+:101E700037E473034586FADD96F90CF91E75930D68
+:101E8000F57BADF61BCAFB04671ACA2FD95465C887
+:101E90005F5ABFC050FFB28680A1BC7F6899A17C09
+:101EA000E0AE3A437E50F36A43FD217B8386F2CB5A
+:101EB0005B3619CA871FAD37E4AF686D30D4BFEA0F
+:101EC0004CC890CF67BB0DF50B6CEF19F2A39D1FAB
+:101ED0001BEA8F49DF6F28BFDA73CC502EED96B125
+:101EE000BDBF367E17764CB1F73F86F68191E27D15
+:101EF000E82D0ABD0F7D5B4E57F9AE684B1CBE8BBB
+:101F000018F051DCC78507FB504EE1BD6B173F173A
+:101F10005342F12337D939A48A3C784E07EC8044E8
+:101F2000F4AE7273D14E4E08DB63596723CEC99D60
+:101F3000CF1EABC86144E76B73FC6539A9E87F3CF1
+:101F40005748EF7BB3C0529C877CE7EE9DA8778D06
+:101F5000657AB5ED288B7CFF78775C5DD68073F869
+:101F6000EF57DB4E307C57B9AD5F11AF50607DF35A
+:101F700023FA5F09FE82D69DB1BA6AE01BB091FEDA
+:101F800058EDA4FC43D5E9947FA4DA43E9EAEADEFC
+:101F900094AEA9F652F9DAEAA1947FA25AA77CB0CE
+:101FA000BA88D2F5D53EFABEA17A32E59F04BF18B1
+:101FB000D34DE02763FA34F8BB58BE19FC5FCC3F21
+:101FC0005B1DA0B4BE7A197DDF525D47F9ADD5AB7C
+:101FD00029FFB7EA20A50DD59B28FD7B753D9537D8
+:101FE000563750FEE5EA10E543D5BB28FF6A753346
+:101FF000E57754EFA5FCCEEA164A77551FA5F48D78
+:10200000EA562A7FABFA0CE56B4DFCF740D6E41894
+:10201000F721645EBEC720EDBFF168BF23710C35A8
+:102020007F65B0DFA3ECE8687C1C1771DDF0FB096D
+:102030003DD7D744F84F4F8AF1E47B0CD1EF2830DD
+:10204000619FCA774FE57B0D33C4BCCA053F0C4284
+:10205000FAEC4DF4F9D6C5F80BD21F1C90EAFF1B21
+:10206000D167B62940FEB09DDF27BE21D5FF52CEF5
+:1020700020DC2F9CBE93C6737A69DFB0D81A4ABDA4
+:10208000318FDEFBA6B85C47E3558A73DF1D96BF30
+:102090007C2C0BEDE9A29F547A67EB1DB3837EDFA6
+:1020A000F02D0197B7724C86F4E354FF9B38CF6F45
+:1020B0001D55B79A60FEDF5E79FB93BFCE0DFBC95D
+:1020C000D7A2AB09FECD04E631D3B942A6BF968BA9
+:1020D0007613185698BF910528BDD5EDDF83FDDC3A
+:1020E000040637E6FDC3AC39B1D6153DAFCF72B8A3
+:1020F0003FFC598EC9905AD3FCFB104EDF3A749ABC
+:10210000D73B978FE989EB92F32A12EF8E8C67AD5C
+:102110004FE0FCBEDDF6F561A55B18FED21FA77B84
+:10212000FD28C76E57C4BB76EDDE11A0F2923B15B9
+:10213000B2CFA6803F83FB43F2DD805355667A0F12
+:102140001EDF19C0FDB353559FDB919CA11EC3FD3B
+:102150008D1A3CA003E53577F3FBF425F82EC60075
+:102160007CB7C0C6FB5DA810DD0D4FCBE5F79FC166
+:10217000DE23FFC9DD4AF7F4804EBE273AB95CA5DD
+:102180007BE7EF98823D15DA4F9E6E51607EE56EDB
+:10219000AFE17703A2E9609EB82F20BF037D99BB12
+:1021A000C0385FBD34A437C5DF5FBEDC83F0AA3121
+:1021B000F1FB43813754F17B4E5C44ABC32FA53810
+:1021C00023D3BC5E8C17158BFB264D2A5B10EBBD11
+:1021D000F05E5D38BEDE49E7EFE7D544EDB374E964
+:1021E000C2E9AA4B174E6FC5AFEEA67784E6EDE2C3
+:1021F000EF1DB2BC96BEB1DEE7AF5CF0469FEE11BC
+:10220000EBA86CD8CFCF57B096BE91E7C975D1AFC8
+:10221000A423D5E2F0AFB347CE8FD30FD0754F8450
+:10222000C3B7C940D7DD88AE0FE3BEE278AB27E97C
+:1022300046057F25807D85EFFBF8FFECA4F341F296
+:102240009CD034E6A3B41CC800E9D8175845EFB9B0
+:10225000CE66F5F47DDED0A9F47BA495AC75543A36
+:10226000C0ED86658B5EC3E7F0AEAB5B351AE3ABC2
+:102270001383A5AF613A61837218FD54E08B215D31
+:10228000301EA2542DC12399376FCE5F825B66E367
+:10229000558E0FF626C707D08DAEBADAAF13F8E029
+:1022A0002A6CFF6DB24EEB50138B0C7C50B298E948
+:1022B0008A3B7CDEBD8D2F86CEF90CB7D498D64AEA
+:1022C000FBE6952F5B5D88E7D98CEBED703C43EA2C
+:1022D0006B46743E87C57BB1DE7141D7C7B319D158
+:1022E000F57185D13D756947B21C7FFA806E61BD7D
+:1022F0007BDC141C9CD88DF4F2249CEFCEF4EB3CD8
+:1023000018079BE3B6D1FBA7C793833951EF7CD065
+:102310007B44328EB5D2CCE34AD1F35286EEE4BF91
+:102320006B616101DC9FC0DF751E8CFC8CEFE628C1
+:10233000F40E740BF2BD79A4CF13ABFF5AD1EFAEFC
+:102340001FB9BF1B80F5E0FDC676E338C538F17CC8
+:102350001CA93FDA7E473A8D19C6FB4D975CC2CF68
+:102360003B0E9DE6BFC8944CF226C3E6BF0BE94E78
+:10237000C675A41FB82BF74877F2D77FA8C942FBD0
+:102380009CDE2140FBFB4A2E97DE317BE8DDDD77CA
+:10239000F273297E2FE5EDB54379FCEB5A19EF1A5C
+:1023A0001115EF8A8AB7B011B1E35F8C79CD386E21
+:1023B0001FF689840FC5595E1DA1197E3FEA55E1BC
+:1023C0007F9E2A72E7219DEFEFA2D23A1353F8BB0A
+:1023D00021AD0E95E86C7BC06BC7DFA3582EE2A43D
+:1023E0002BA2DEBD5E9E37DF89E702AC0EFE9EE5C6
+:1023F0000323E367469E477FAD073FB77463CFFC77
+:1024000077915EFADA8323493DEB9A07E7AF88F5C7
+:102410005CE204789BD0EEF48978A7FC5D9351A42C
+:102420009F259E2F543F3FAD0517C7E37ADD8CF8FB
+:10243000CEB1DA46F253ADD74378343AB5E7C4CDDE
+:10244000843FCDD71BC7691A1CCFEC50FFDB260B8E
+:10245000C5A15E3695FD19CFADB77E6C6578CEA16E
+:10246000DED1594323B7FEC75F8DA2D431BC90BFE4
+:102470003FC912F09DCCFE4EF697FF462489FB61C2
+:10248000F50ADBC51F6BD513F09DB77A133B7D159D
+:10249000CC6B8B7DC0839711A9F9545CE77BDDFD84
+:1024A000AFE03C06B32ACA3F60F1CD5C07E33EE0F3
+:1024B000B2117DCCEAEE7B95CF932D1907F3BBB219
+:1024C00040A1DFAD5B227E97CDE18D37BCB7EB3B02
+:1024D000D393F4C5DB423ED7A6EBCD78B1A343B886
+:1024E00039B556C33B592C8BE273128E91F8720E9C
+:1024F00036E0CB6F8EC4D750C0D7A591F8D2958B5C
+:10250000C1D7935D18CD57D26560A467D5A83CAEFE
+:10251000C76AA896338FCEB7B6A34FCFE67AC86FF7
+:10252000D72E217849FA94F41A834E6FDF8EF23851
+:10253000DBE4C4FDDD7BC7C5937E93742BE9D5D264
+:10254000959FAF02BAF57585748ADD371A654834F0
+:10255000DD62DC2B923E4B3AA463E68CE4D7F1605B
+:102560003F24B9D0DE39BAA13E823E4BAABED6B8CE
+:10257000FC387B55FCE0709CEE7F012DB720EB0012
+:10258000800000001F8B080000000000000BED7DA4
+:102590000D7854D5B5E83E33672633934972924C93
+:1025A00092811038934C424826302480FC552721D4
+:1025B000D0F0EBF05783243A58B4412193026DA335
+:1025C000D77B33908001EC2DA2F5A1F2EC808A68D4
+:1025D000B506A51ADB889320DC685107B52DB6DA5D
+:1025E00006DBCF9FB64A10AF175B5AEE5A6BEF93DC
+:1025F000CC994C10ED7D7DDFD7F7A27C3BFBEC7DC9
+:10260000F6CFDAEB7FAD7DB268A6C4DEB130FAB9A1
+:1026100000FFFCF0EF9D62F81D7F5CF85456DED59C
+:10262000DA8DE2F915434BE8C7DE2D1EEC675AB68A
+:10263000A9981918DBDAE264CCCC58BBE4F5E5C004
+:102640007872D3A90DF87C8B0C1D1D8C853CE6F0AF
+:1026500043388FEC2FF6A70C8E975554E550B318DE
+:102660004BB9EC4FC93740BF4FB30D2A93E03DF54E
+:10267000BA276C93E0BD93C90CDF4BCD8C363C0080
+:10268000EDFD6F8E65FB60984FD704C62876C6B601
+:10269000B5C03EDCB89A708E612A967D39062796C1
+:1026A000AA939701277FCE447B98EA7B5CF98C4DF7
+:1026B000C6BA4FF4EFA3FEDBCC3B2D369CC7655169
+:1026C000F64983EBBCC2C89A3A60BED92A6C0AD6D6
+:1026D000CBCEB7AA8B53B02E51FDCE96DDFEDFBB1D
+:1026E000713D612A33178459A08C315B71480D41CB
+:1026F0003FCB6616C0F7E3E179BF4BA675587AEE7B
+:10270000612AF4CB747BA500F4732C80F13438C3B8
+:10271000BF45008AB472E8B78FF9D824848F2D1C86
+:1027200092868EB728ABAA574E1DFEFC16C5E10156
+:102730001378A09DA7E56FC64087076B4E03CB6655
+:102740006C23F65519ABCE875F70DE66F3DE2498F6
+:10275000F75A359DF6FD89A32A8D79869FEF7E383D
+:102760009F501140BDC542E5BE168585004F1E0431
+:102770007CC1FAFE1695CA032DC5543EDAE2A5F6D1
+:10278000C75AA652FD472D3EAA77B4D450FDC916AC
+:102790003FD50FB5D452FDE99600959D2D0D54FE01
+:1027A000A4A589DABB5A9AA97E45129C1BEEA738CC
+:1027B000E45C02E7D17EB3D9A7027CEEC67304B80D
+:1027C0001FF1E5677AE1BCADC5069604DDACC777BD
+:1027D00031DC8FD569F085E11CB63A77B1AF43693A
+:1027E0009A92D22EA5C1FE1FB7B74B13A05DBE9320
+:1027F000A9F0FC7E29D4C0BC8CFD6B78865F9EC698
+:1028000098DBF9CDAA0CA8B7862B775A006F8BD42A
+:10281000C5B59B62EA6A4AF98D0795C1FA18CF5E81
+:10282000D906EDED6AF54E87C4D7C14632B62B3CCA
+:10283000C7BF09F02892CF4208F77E97398CF8B8C5
+:102840001ACF4BC6F52BB4FEF9ACD56980F58F5184
+:10285000CDE54837D03FC21C97DEFF6E55A5E7F1A6
+:10286000EF5DAC9F61D225F563C68B8C87EDD245B9
+:10287000C6B1484B2D5158FB0E93E01F5976E21F0D
+:10288000ED2676AD1FE0DE6EE5E5699744F3F5BA17
+:10289000AAAE724179958B9F6BBB35A454E1FC6560
+:1028A000062FF20BD6EC7A3D1FE6FBF64B32DBAE81
+:1028B0000EE2E7E3829E0BC7A4F8701EF62F967017
+:1028C00021CCF3D5318FB76540BDF001AFD708FDFE
+:1028D0007730AF0DF12474BB813D04F51F4E2AC83B
+:1028E000580CDD4B27FF382300F8922CD61166AC2C
+:1028F00006F16DD3961BC6F441F9E909CEA7BAC417
+:102900003C7B4DD1263ACFC97686FB666C6732F2A6
+:102910009D4D4E38A4CB18338CE0A5D9A45C8DFD19
+:10292000CC5BCC2C04EB31FFF5328B1FC66B3D9793
+:1029300054837C84B16832F231B335A0A4C3F39DD3
+:102940002103F18556D51E9660DC1DF6F25E15F961
+:10295000A762F016221C3D0682639BFD6B6123F289
+:10296000676953032B80F52A4F5A5CF03CEC312801
+:1029700048E761DF921AAC8702B2B750150C02DB50
+:102980000319E1ED382EEBFFD9046CAF635E84C30D
+:1029900096EC3FF72443BD75B9E235F2DEAA3C85DB
+:1029A000B111F81B4CD96AEADB9C8CEB58C1FBC314
+:1029B0006FDEC54087A949FCFCBED73D57C92F2310
+:1029C000B912EAE37C49BA0084289BBC162FB48F65
+:1029D000B797D7F8A09453CA2D2AECB34D29B7ACBA
+:1029E000A2FD333B83793219E74FAD8AA1262CDA59
+:1029F000BFEE2131F5827B0A9112B5B7D9777523E5
+:102A00003CE4EB1973A9B83E984FE37B000F4BC130
+:102A1000CC5E15F6D17E4306ED4396BC5467D7CB0A
+:102A2000B4EE91AA2DC2C6039F372FEC65C03F4676
+:102A30005A6E5A80F5110DF2EFFB62F8744E405F4A
+:102A4000CFAAD5D73319D42D31F30ABC89875B3C83
+:102A50003C46286D2770FD2302323D8C5FFF3DCA46
+:102A60005DE9950CD769A77566DBAFAB040801CAB1
+:102A7000F93721FEFDBDEB1CAF2CB1B860FEF10EA5
+:102A80000382934D60FD9B71DC1D02DFDB5DFC3C2E
+:102A900007E9CAA8D1A50FE9724CB3818562E48E1B
+:102AA0002B6463A198F90ADA3374F5C29D2375FD8E
+:102AB000C7EECED7B58F0B97E8DA4B0F94EBEA65EC
+:102AC0001DD375FD277456E9EA1323F374FD2B7AA1
+:102AD00097E8EA93A357EBFA5F76F23A5DFBB4BE50
+:102AE0001B75ED33DE5FAFAB7FA5FF165D7F20E387
+:102AF000868E047272BA8BF38536A72FEA4B20CFED
+:102B000007F42E45EE1F380FE09D494EC0EC98F9B2
+:102B100052BC3640A6C13A63A3947793459DE47AAC
+:102B2000ABBA19F139D54CF82CA33C87FAFA9BCDF6
+:102B3000E124C4C3CBBD2AF217AF8BEB336F17F977
+:102B4000BE8AE756996A21B920DB793FD93E87F4DE
+:102B500094D1BB812F55A0D6C806DA93913FB78494
+:102B6000FC6EF7E0BAADCA4E86F45B995AC3FAEC34
+:102B700083EFCB8A8F0552703E95E6B32821EA6732
+:102B800055E1FD987D1D3618981DF97837C809184C
+:102B9000BF23255746FAEBF86B4935952933E620D4
+:102BA000BE4F54D8034F40FF0E89F532D0933A0CF4
+:102BB000EC2CE86CEC497BF99D20AE8135FA8DC890
+:102BC000EFA6B0262A471B980DCBBD52DF0606FDA7
+:102BD0003C4D27AA72A0DF0977600DEEFBBBA04336
+:102BE000E0BEBE3B9EEB595BB2E7A9A897B5BB3AE6
+:102BF0007AF3713D592057901064BF17F50A6DBFE5
+:102C0000778AF394F3DBFB50FEAD4FB7A8A82FC92A
+:102C1000969DFEDF03BCEE37F53DD20AF5364959E5
+:102C2000DB817CF166BBF72186FA23879B9A62A839
+:102C3000D80CE3766CF2C9E9D0DEB18D79DB903E39
+:102C40001C959BD3E179E1A855860CA407F7A6CD86
+:102C5000586E413D16E61BE7D96BC884F6D24995FC
+:102C6000B50C65AF02F3650E8F4FC6D4DD0CF7C30C
+:102C7000DCF2BB8857A8755F80A55766C079C3BCD6
+:102C8000563C6F894A8283F59C3D6CC5BA9BC3C58F
+:102C9000EA93C2C95077B87D92CF83EFEDA6F3B522
+:102CA00046F47AEC1A77E04E84A76381FE5C65CB2C
+:102CB0005DB4BE1D064E17EDE9EA7194CFED2E7797
+:102CC00046AB3AB84E8DAFDC2FE4A7F65CE32B0A97
+:102CD000DA145983FA0DE0F96E4301EA673B19F201
+:102CE00027EBAD3B19E2B55509A90CF5F07F0B11A7
+:102CF0009E6BFAED064133D5F9B51694D7671DE5FD
+:102D0000A4CF5A9BF7D379C5C3CDDA6760BE8BC019
+:102D100035B5E85E92EFC080D542804F4FB6BD61B9
+:102D20006F02BD7FAAB01BB6011947495EF92DC8D5
+:102D3000AF4DC2CE004C30A07C3BAB30925FACC3F9
+:102D400045F50DE9BCAE8DB321AB3CE762FAB77532
+:102D5000B7850562F6B10DE641B86C39BFB806E13A
+:102D6000CA64220EB6E3AF9EBDDB1196C2AE992AAD
+:102D7000E03D1BE706B88E3633B20BBC8E053548F6
+:102D800077FE73F9247CFFE4CAA07EDE103336D1CF
+:102D9000BA4D9A5C325C98406B55CD9A1C26D596FC
+:102DA000CB2DF8BFFB82847C3F468EF182E4BA26AD
+:102DB000B70B77EADBC7EED6D7C78587BCFF06CA55
+:102DC000FDE5FC77900BFAF67B85FC5E8EF21B4AE4
+:102DD000B6CC4472CF022BBAC0E5EEA01C04BE9064
+:102DE000D711A944363A6A638C3C64B40F9D7C5C6D
+:102DF000E3E67CCCDF2B9BF01CFDE7C0F8A818CAEB
+:102E00009747277178F79853C29BE1BDDBC12E0A23
+:102E10001471FB3900A4F65DD9FBCB3AB4B37A8DBB
+:102E20005EC0D881738A3FD715F91C7F7A5DFEBFDB
+:102E3000BA487FE8AB40BB1AE70BC4CCD7634B1D45
+:102E4000CFC06E79B92860CC877E1FD73826217F06
+:102E5000481AC54C489F383F2B1AB4DFAF12F4B460
+:102E6000C3FB5AD31158C76D2793501D67B38DC745
+:102E70007B5BA0BE3E4F267EA65CB6F60768275752
+:102E8000FD1ADAE19DDB543587F4F45E13D9EB5576
+:102E9000028FAB84FD75B4D044E3E68A75E78812EF
+:102EA000DEB071FB3B62437DB6F400F062FD792633
+:102EB000F3761FE9BB651DF1ED3E86745C22F005DB
+:102EC000EAF64AA84F14F50E26652A708E136AFB9F
+:102ED0007AD094F0BC78D4867878D0CAF5B7470514
+:102EE0003E6433C91B81F5671FB07BC3D02FC5C8B3
+:102EF0000E46611FDE17E47762CF7D7C97BEEE61E0
+:102F0000317517AE435FBF5D6D92102EB7D7818EBE
+:102F10000E5BAEC84F71BC5BCA10E645885FB38DCF
+:102F2000F689684FADAFB433846BD2A9B1FF2B8A59
+:102F3000FCE38491A15C5092D53BAAE17DE56799C1
+:102F4000DE4DEAE0F93FDA82AC1BF8DE052F6B03B9
+:102F50009EFCDD2A5B03EABF8FC179A21CF911D860
+:102F6000D9D8DE01E78AF527C1CEC6F210D8D9F844
+:102F7000FC69B0B3B1DE097636963F013B1B9F7703
+:102F8000819D8DF5AB8A2ABF8AF8526FF7CF9610D4
+:102F9000AE3E595580AEA44138931F48627DD2059C
+:102FA00020903A85F525015CCF8DE17490841E2632
+:102FB000E0C32CE0B5205E7EFE383E6D9C8029D1BA
+:102FC0003853611CB2132C0AFA45F2E18D3478FEB5
+:102FD000E1CDBFDA8FF262A11458910FFDD74D7E7B
+:102FE000C7CCF5E77E33F6DF6305FC073E344AD0F5
+:102FF00041A80AE08972F725A3B7157A5D3EEBD4A4
+:10300000862CB0BF6FDA377931DAEF97DF74AA62B6
+:1030100034D40FEE0B2F964119BFFCE1534FE5025C
+:103020000FCE796015AFDF79EAEC28684F0BED58C9
+:103030005C3D0DFD525C3EED91586DAC7ED72CF0A1
+:103040003BD8BC8BE41CF077867068CDF6937C3C53
+:10305000EDE84F5D05FD8359FDD9D75D847F079B62
+:10306000EF2639D49AFA07D23F5A07E48597E485C8
+:1030700036AF262F3E16B8A7C98BF5565E1DE8174A
+:1030800028A0E7770ABF0E0B17523DD3CAEBFF5EAD
+:10309000A5BE8A760FC087ECDC23A925DF9B897645
+:1030A000658DEC4D82FA9DF6722BCA9B07F3B9DD54
+:1030B00002E386D08E0FCDB6841FC24375A8448F1D
+:1030C00019DAF80E372A5D2C43ACE385E9B608DA45
+:1030D000F9ADD5967DA84FEEB2E7D378AD53CD21AB
+:1030E000F4AF68F5CDD3A75B509F484FCD70615DBD
+:1030F000E34FDB01EFB1841F238E5B25B65B65B127
+:10310000478CC8CF2DA63FC5EAC9761625FCF11A13
+:10311000C020413E50C0F1AA82796BF1B9596A0AC8
+:103120002132EEC1B5E33E52849F92E5F2756BFB0E
+:10313000F0E5F27D69FB483187C43E484FDA6537D8
+:103140004450DFDB05FBC2F176E7AB049FF87D312D
+:1031500074BDC2B8B3A68A752B330FE13A661B7CE7
+:103160006DF8DED1CFEA1C805E6C0E6B92F17901B6
+:1031700058B4E89705946EBB7011BD23DE2F7BF920
+:10318000EF24DA0FBBC94CE7F24C215FCFBDE6B0AC
+:103190008B91811B1EB1246578FC7D6308FEFA18B3
+:1031A000D2536B868FE3AFD29FBA09F137BD3F7B15
+:1031B00033ED2B92F03CE2F138FE7C7E0BFF841C59
+:1031C00030227C3FEF3CB573D4F0205E7E4D28501A
+:1031D000B4F375D23E7DC59C0E343D8A819D9332F9
+:1031E000147E5B613CB568B06E76FA493F3639BCF7
+:1031F000C5E8BF6DFD9BB12191FF36AD80D3C1A65F
+:10320000541BE9CDADA95C6FEE4E9DA7B377AAC163
+:10321000FE91003F8C99AC03E9C8987635F9BF8CD4
+:1032200039A821E1BAE2F4D1B4055C1F55401F4D25
+:1032300030AF56CAA88F26D05307F4D18C795C1FC3
+:103240004D35933EBA27C55CBB3701BF792F9FEB45
+:103250007BDDB88F04F61ED879E487D4EC3CB3123A
+:10326000207B4DDBE77BF99CAEB4FE494A1343BF9C
+:1032700098D1EC5551DF34DAB8FE9804DB2C8E91EE
+:10328000DFDAFCEFE49B088E3D45FCFC0C16AE9F9C
+:103290005CFEAAD49408EE6A81A63F24C6BBBF0395
+:1032A0006F882F94DBCD3ED40FCAEDCE2AD40F8683
+:1032B0007B0F4CCDD0FB19837CC5FBB72946923FD1
+:1032C000B2D78978D661EA7BEA55B4E38EDA49DE73
+:1032D00074A48CAA8AD59FC15E0D15C32007FF0276
+:1032E0009468186AA782FD34BD00C6ED599F3D89D8
+:1032F0008F0B7A5ED950BD32DE1F3040EFA9FB5DE7
+:10330000FCBDF0087C4F5A3F3507F12A9EDEB532EE
+:10331000CFF952DE6A5857DE885E2AB5E7FF9B195F
+:10332000C9BF16DF7FF1C03970B93C0E264B33920E
+:103330003C5E8CEBFE70E36BD95E584AA37C86E45E
+:10334000F2C74D53D36E5339BF3D8072E69B32F1C5
+:10335000DB516BBAD33362CEF9DE96CE3CD98D7198
+:1033600083685EB59BEC015FA2F5FEABA03F16192A
+:1033700043FCD924F0407544E78E05B8AB7683173B
+:103380005DD2207C757CA0524EAF5660FEBC16E626
+:10339000B543DDC514F267E55D3012BEE51D594148
+:1033A000783CC6D12F853C31F3202B8E898B7CD283
+:1033B000544DF499973360C751FCE013476431D200
+:1033C000F72777F115E53DA06F07194BFEE61B3691
+:1033D000DAC2680A8EB95531603DEF07121BE5C2AB
+:1033E000751C71DD86FE9A6792C95F63DCED267FEE
+:1033F000CB0FA4C0F505B08E0FC3EAB7D1CEA51F81
+:10340000E8B7EE3BB67DDB498E45E7921CFB968123
+:103410003D94C09FD456C0FDE35B04BEE7395FC94D
+:103420005B5D81E5713AEF4BA5A783C8B7619CDB73
+:10343000D27652BC2B54C58AD1FE6B37015E25A0D3
+:10344000D73305226EA6F163013F2B5A2BB00FA391
+:1034500024F4BC038F3EFA6836CA6D864ADE00DD6E
+:1034600069E32417775063B2D7C7D0EF20293ECE47
+:103470006795903384F19DBF1A13E27544E3D3AE90
+:10348000AD4EEC5FEDF63A910EBA5D539CD701FC60
+:10349000EC76334B8AE1C31A9EBC903285F4106DF2
+:1034A0009CF529F917B5B7CDC08FD58BC86933FA0C
+:1034B000BD519FE999665161BD5BEDE551D4B7B649
+:1034C000DA1DE5E43FB703DF88F127D9EDC7080F20
+:1034D000ED5EEE67B323FF457F92D87FB7EB18ED23
+:1034E0005FEBB7A780D3BDDD1BE1F147B066B09FAE
+:1034F00055F687D0CEB03A18D995560BA7A76438A1
+:103500000E4B0C1FD1E6FD7E01B7D7B68E2A8F5623
+:10351000D2FA64F408B0ADCE7227C9438433EAA36B
+:103520002306F451F29BBC2EF881364E6B37DFA791
+:10353000BFD9E9ABCE443BD4FF22F285ADF6EB2CEC
+:1035400021940B29932E3ADEDBE2DC868ED73C4BAE
+:103550008CF73AD28331A55CC1F14CC82712E0DF69
+:103560001FC4BABEAC5F0C20AA90DDC6B87E051899
+:10357000EF4CA44768A545F8B786BEC7F9A44BD859
+:103580002FC0273FC5F5AF1BF5CEB14AEAC5ED9672
+:103590008CB972B10CE7F5319CA0511AB4E3E3F594
+:1035A000994A633FC9354D1E69F2E95ED467CC8301
+:1035B000F4A4F95F721BFC24B725879FF006F41B67
+:1035C00015E9C68871DF04709BEEE6709352A7AAD6
+:1035D000482FD5E7FB72F1BDC329EFE7B2183F9A38
+:1035E000C60F5FF86CBF15DB3F69A8BAA8DEA2C59D
+:1035F00085878B07A7DEF2876FC6EA2DC3C5873F95
+:103600002F2EDC936A26FFDBFD929E2F4D72733EB8
+:1036100038C1ADC50F0363DD59D8CFEF25BD51F8D3
+:1036200053DE2E0A94B8D1FFD56E662138CFC39FE2
+:103630004D71227E5C2A7C35FFF948A14F8DB4EF95
+:1036400097904E47368425F47FE7367448BE8BF456
+:10365000330ABF92D6DF24C6BF42EE37A2BCBA42BD
+:10366000D071EE399915C7E8817F2BE0FA9449E8CB
+:10367000EFA93D8F5871BC1E83BFBD08E543AA4129
+:103680007D2886DE4D6BCA2D5531F069C5B84E8256
+:10369000F3AB730FE85D641F69F2D6A4C90987AC68
+:1036A0009313C1648EB79ABE139CCEED21490A2CA8
+:1036B00047B89E9EFE8745C8B24E4B1D668C7F7FE5
+:1036C0005E5C6340AF31845769760CD28B57567E6F
+:1036D000DA07EF4F7CB892E861320B507919E37A40
+:1036E0001FE8515FC7F92A70C931E7CBD0F590FDCB
+:1036F000F9FBB812FDDE59E89F8B92FFF4BBE7257A
+:10370000E2E3F1F0D93F009F81F89DCE0F9A2BE4C0
+:103710005AAE6857D10FEAC27894DE4F59D1ABAF99
+:103720004F8EEAEB979D8CF37B867C3F7767F3782F
+:103730003F0EBA07E80AF9C16A11A71C150A572AF1
+:10374000B0DE3CD641F1C0DC860C1D5C2F378A3CD4
+:1037500009E69398B64EF8C995177E80EFDFE7D655
+:10376000F49F10E9593788F66F54AFFE761BDACE16
+:103770003B4DE40FB5C0E408AF6FCC5D321BCF7595
+:10378000883FB549EF47CD8D6D0738DCB0C7A46BD6
+:10379000F7FB26921DB054F86907F68BEBC8E2FBE5
+:1037A000CD2D1F3AFFE7CF0BFF3286CEAF8D7B2F9B
+:1037B000F01BE4A3EC3C9CEB14841B438F03CB93E2
+:1037C0002312C6A54736311FEAC3B91B992F917F33
+:1037D000FF6501AF7838B3D01504BF59E2D948BBB3
+:1037E00091ECF4911B0DA4078E047E807C60D15A6D
+:1037F0002017A8E7AE55498FBCB2C1C0500EB0F338
+:103800002DBAF761B9E4EFD4CEFD5E1C0FF5C87593
+:103810002C6CC0FD3495103DD1BAF207F101E0F5F2
+:103820000E879785E3F75493CEAF99877ECC18B86F
+:103830006878901BF7BCD1CDE32E1A5D803C7BD914
+:103840004D78C2E55C21CA3958D287D34EEEEF805D
+:10385000F55DBE99D17EFBD36D619EFF30102F3098
+:103860005E180BFCC932AB18FD2A3B149B01F31404
+:103870000EA7F7DDC7D219FB2DA8BFD533197BDE04
+:10388000D65F2A41FD8F0FFECBAE763894C3D6FEAD
+:103890001FA2B3D77EFBE6253531F5D47FBF9BEA67
+:1038A0006C2A5365808F0D67807DDA9479078C30A0
+:1038B000BFCD632727A48D0DD029EDA76DBA7A3B24
+:1038C000E679B4151A484F62B1EDB08FDA4245D0AF
+:1038D000B78FF2D8580D8FDBC78E2F3B2E32FE3CB0
+:1038E000187FD21718DFC2D79F8D8F40BE64E3FACE
+:1038F000D14F8DE3E3F9A2B328767E319ECC427B93
+:1039000031BE02F3D9253E9F827924D94C9F3730AE
+:10391000309F02F395FD03F6533BF43C4C173B8F6D
+:10392000ABBFD879B4197CB4DED0783BD93F0C9AC0
+:103930000D53D0CEE0F35965F6825CCEE1DA366500
+:1039400010AEA0EFD1B8D07DD305016713C25931B5
+:10395000139C87835B8FC2F398B629B6F026D7FFF6
+:1039600085F372F2F38A9D0FF5C64B9EEF6A98CFEE
+:1039700071E9F3217C917E06E00B67B239FBD2E15D
+:103980000BAB0A5D0A7C7B605C430C5C07F385EE45
+:103990005150FFB79AFC162FF0DFEB0B791EA2C730
+:1039A000B1C442F903594B2C9897B7C563AFC1FC1A
+:1039B000BD2DEE6516538C9CDEE2A9A376E84F7907
+:1039C0004E9E880DDD13AC8C45C9FEDF36B3DAB9E7
+:1039D0000AF1A789E74D6979449A3C64223E49FB84
+:1039E0008217D3BE72A8BF07FA6F6B9A44796269D7
+:1039F000E97FA6FCA81D0D5E2FB6DF67E571C6BB8B
+:103A0000459C091195FC68E3A73F80F1D6F2C2F509
+:103A100012C517D75E3CBE587E265A8579566C155E
+:103A2000CFA372D6C971F2504FB73B10AE3CDF291D
+:103A30002C71F8EAC6BBAF308BC79FDDFB18DA7775
+:103A40004FC158463D7D1930EF289E1E65B34FA9E2
+:103A500044BD7CBD81D6918BA17C1071E5650B9C2A
+:103A6000ABE0F9A8EB65AF04CF733CB752FE116829
+:103A7000F5A46F783CC7ABB03E649FABF5FB88DF25
+:103A800057FCBA417091BCD1CEABFC8C3719EDA874
+:103A9000F2C225941F463F1ABD1BE3F69389F6AF89
+:103AA000C16705396673C7EC8BE9FA093BED7FB650
+:103AB000BE0D9109E5627CFCEBDFFCB4CE24E6B5DB
+:103AC00098E9BD3AB217B5B8DA48A41D3CF7D18CD5
+:103AD000C725E2DF9FC2DF674E1E674BB281E9094F
+:103AE000F427DD6823FF655212D4E17C2433B38CC4
+:103AF00080E7F70ABFDF2689C9581F9C2FC270BE16
+:103B000056C9BFD3EBC292DB4BA6743FE517629850
+:103B100036D6EEECC1BC0D685FBFC695837EBB3464
+:103B2000208828DACD222EA5F949520BFA56A2FC9C
+:103B30007EFDA1BF2CB1A07C46C7D274D0BE0B3F86
+:103B4000DD159A39489749E7463235C67E49929B3A
+:103B5000287F23E9DC689D3F2522EC2EADEE73C85B
+:103B6000D538DF7FA15D00F85CC994367CAF128048
+:103B7000A2C6FA47CF3975E30C8E3F4A376F04EC83
+:103B8000E7D838C0F0E32733B53876FCFC61C62FA0
+:103B90008A1B5F4938FEE0B899BA71B7C89C5F8448
+:103BA0001CB670227F5E5651D57924E5E1F2CB1C1C
+:103BB00045DCCE057E2C53DC49E0CD6DCE26CA37E0
+:103BC00033DA787CD424E22547521A785EC4287D03
+:103BD000BE591553646CDF923AA75782F62ABB5E32
+:103BE0004FBFE2FC3B46E43B57C87A3DDDC79A082D
+:103BF0003F2F67FAE7A6517A3E7010E903FDFE29D0
+:103C000093A294979665A73C83E1FC076FB530CAF1
+:103C1000973225FB9B50C695ED4FCBDCE2847A1A98
+:103C2000C7AF19FBDD4BD11FF496C0E32D40F70859
+:103C3000C7BAF5397B8D31E3D69923852847EA0C3D
+:103C40003C3F9F7E60FEB7B246923F357E5ECAF033
+:103C50008DF147D537497E77CC3EDE12743130DFA7
+:103C600086DCBDA8C70ECC9714994CF30DE4F988F7
+:103C7000F9B2BFDC7C6F0B7AD6E6ABFFB67E7FF580
+:103C8000E628EDAFDEC0445E3F9FEF6DDC9FEB4B5F
+:103C9000CC27F2B506E6FB8E7E7FF54951DA5FFD53
+:103CA000803D29E6CBFE72F325999B281E7387C4BD
+:103CB000CF754351D99DE88F3FBB60BD8AF8A6D927
+:103CC000678BF005C0B345229FE9CA5166D21BB489
+:103CD000710FB44C653E33F7DB60593C53A2FCFED8
+:103CE0007153251FC6C3F600DDFB8AD02FA5507B7C
+:103CF000B8C549E5BE1695CA07C11EF4917FCACB67
+:103D0000EB45DCCEBF6384B26235EA0B95369EDFAD
+:103D10003C730668A283F61618603D56CC23FC1A45
+:103D20009BB81D6A45BB393C1CD5D9613C27DBC417
+:103D300017A22D504F9A6654316F3BC9C5FC89FCC0
+:103D40002E3F28E2FED8DBB47CF8AF483CDE0EFA0A
+:103D50004825ECFF5A016A665C20A15E75E577D2C2
+:103D6000491FA95BD697A2C03AAE9126FEDC0DF0A2
+:103D7000F8ADD047AE1DCDE938DE9E74A0649984BD
+:103D8000F97AC670187E5D9AB294ECD1A5CB19CBA6
+:103D900080F7AFC4F740AEBC2AF49957FA9218DA0C
+:103DA0006BA16A1E67BEE656BD1D798735A2A01EAF
+:103DB00077C74407C3F3A8DBA86FBF4DC40B96C6F3
+:103DC000D99557C6E5D180964978823C814D83F3D9
+:103DD0002A4A71507EABC8A3B9BA48E57C6E948379
+:103DE00092A833E6BAD330FE98644E7CEF461BEFC0
+:103DF000A8E03BCCE12338687967CCF8D8447A5FF7
+:103E0000CCA7BD77AFF4D8888BF935416F7BB7AFBE
+:103E100098CB67D4AF0FC6ADF3EC82FCEF55B3443B
+:103E200078DB2FA35F415BFFFF297CBD097D1AB0C2
+:103E3000EF57677D3289E22D6C14ED7B91863F222E
+:103E40009F6AE9405D66724C3E1D73F67BF0BCDFF5
+:103E5000F84AB2773BE19FD01F226F1A2E247FF1E0
+:103E6000F106D6E1F4E5717F5CB542F94062BCE150
+:103E7000E01C9FEFA0F96DE82726DFB0752FCF7704
+:103E80001CE9A8FA00EF45E1F3777478A5BFFFD4E9
+:103E9000DAFD8884F6C57D789F4B1E9C0FFDB4210A
+:103EA000D25FF5F7B2E2D7A5DDB7D1D6D36A66C542
+:103EB000648F1A803FC07C0BED7DB2A4A2DFBD5F92
+:103EC00046FC2A19CBFD449813CCEFB9703DCF982E
+:103ED0006BE0F91B6354AEF7B9FB47C7C685D2C682
+:103EE000F278DAC2E4D736AA20FF4C0F6F5E8AF967
+:103EF0004B0BD35EDBE882BAE5E1565ECF7DED1376
+:103F000017E86CB687DB78BDF4B54FF2A16E7F7809
+:103F1000CB52CC675A38831150521FDE4AF2326DB1
+:103F2000AC664F4747E17C0B254E1F5FB634261920
+:103F300012C6EF9D63353F2933E13CFEAEFF388961
+:103F4000FCC8AFF95F7DFA7823C3A66CBC27247E3A
+:103F50001CA9A4CFCCC3DF019EF3E54837BE6FB0E8
+:103F60004408AE63316FA69850E0AE0B17C98F8836
+:103F7000C72309D0B519F565556175A01FB736B3CC
+:103F800080B52006CF994FE039CFE3D1D6A3CD3FFE
+:103F9000645D70A47246ECBAF6D038DABA4E4F4C73
+:103FA0000AE17D322D7EAAADEBB4D47F3F3A23BE29
+:103FB000F9C3CEE5786EA753FA474B503FF1F0FBBB
+:103FC000748EA7B3FAEF97BC3175133FC7CB1FFEB2
+:103FD000C152948F1B25DFE563317FCE6CA77B6BCD
+:103FE000ED42CFDB91150831AEDF53BE63288FDF82
+:103FF00007A89E24F962E3FB3502BFFE632CD71F9E
+:104000006727ED6C3A01F8183C24B14DD03F78FE9B
+:10401000AC19EDF1855DA7CC6877371E3A6546BBD4
+:10402000BA11EB304EE31E33F1AB78781F1F6BD41F
+:10403000C5D1357BE2685ED11607ACA771B5E4C582
+:1040400014D9F5CFA6CFC6FAFA55B84BE0EF330F27
+:10405000CE4674A9F7776FC1F25AD67714E3052BD1
+:10406000027A3D7F65835E2FAF6FD2EBD3D7EE84AC
+:10407000D301F9756D73AEEE3D861A32AC678538A3
+:10408000CF15CEDBA3C6F1588FB987231159937F83
+:104090006725DF01947ABFC5C22E89E8B8B1D64240
+:1040A000FED7A3793C7F3EB8D6487941414407AC5E
+:1040B0003749C29FE523FEA8C9EFD99D678EE5E287
+:1040C000FB6B4D040716F245D1AF5F2BF0E9DADA4E
+:1040D0009A0F10CF6AD51BB91C1FB3DF44FE9500A1
+:1040E000D7C755E1FFAEEBBCA33A03F5CF8D12F96C
+:1040F000375636E8F5F57AFC05F5B766291C7121C7
+:104100009CF4EDD736EBEBDBC70A3956CA4A914E21
+:10411000BE375692896E44FD4F79BF78250213DD74
+:1041200022F97721DEAD3547C6A35CBB450A505D59
+:104130006B87E78D5CEE70796F008A22BE6BE27E42
+:1041400085D03A89F071E510F91FA31F1887D68F23
+:104150000A7ED26AF56F247BE93949417DA45AF67B
+:10416000C9199E417B361E1F8F093C7F85F57970EA
+:104170005D450874807FD1D2B430FAC38A9E5F4512
+:10418000F98D451592D740F46C60CDE558CAC41F2F
+:1041900050DFB4425964ECA8257E3DC1ACF0FC412F
+:1041A000278BE503BE479884797CB8749C77FEA87A
+:1041B000DECFF01C17EDBEFD0CF23B7781AFFC0E9D
+:1041C00058DF0E2B9F7FC7B312E9AF8D9E63C417D4
+:1041D00073004D70DE46A7E08F9DC01FB5FDC3790B
+:1041E000E720BFC20B210B3C34EF082D3EA0E5D7E2
+:1041F00046AA0C1780EFE488798F97A9B4EFEC1BDF
+:104200003B24DC771E0B6D423FD18FC7327AAE95CF
+:104210009A1F7FF960BCBA06CF739DB3CF4CFAB733
+:10422000885727E8B764ECE404FD7C4CE747986DB9
+:104230003C9F8A71E5F5CF155C34AFC26831E8E880
+:10424000D5A4D874743DBF584FE70BBD7AFABE723F
+:104250006A81AE7DB1AF54D7BEB4A642575FEE9F20
+:10426000A1EB7F55ED2CBDBDEF9CA7EB6F5597E8FB
+:10427000EAC9C557EBFAA778AFD3F31B4707E50F99
+:10428000982DA1BE808AF7E6199B9A31C8AF4B538F
+:10429000A13394B60AAB1DCBF68949113CB7F69110
+:1042A0003C9E9AF4E2B79C11847ADA63964A287F9E
+:1042B0002885AB305E6411765EC9AD4CC7CF1795CB
+:1042C000723CD74A5371401907E7E339A0E6F27C04
+:1042D000E968099E8F051D8888C74F5B48EF9810D5
+:1042E000A7FFBE5256692B467FEBADBEB9E497EAF5
+:1042F000640ADE97DD67E6F94CA1A779FEACA7B3A7
+:10430000CFE08BA1B7BB8B397D7EDF5F45F9498D4F
+:104310005D20CD10BF77BF6346BF5D6357772ACA64
+:104320008DF1FE77CCA85F0F3E17F244EEB761FC2B
+:10433000F2898EC47968738ACD34FE31C16FEBBFC8
+:10434000C5F92D20DC02B48F34FE597F90EFAF7E8B
+:10435000B999E85BE3A3C03F75F1B078BEBC726663
+:10436000780BD22EF0519DFD72EDB2391FA03DC4E5
+:104370005884F418E0A3FAF6515B89BEAF8DB36F91
+:1043800026150FF053CF05A097937E43C27D2D2DA8
+:1043900095695F2703B308DEDF07B8A1DDF8FD21CB
+:1043A00070E2F0FB3CF83C2EFC89DA39C5F7AB2D06
+:1043B000E5FAE8E3C3F0CB3DE21CF749D17264664D
+:1043C00041BF8DF074A5C5B21CF30C8EE57DBA1506
+:1043D000E309F53F96D09665BFEE7E311BF30ECC18
+:1043E000078F66633E44B0E368360338AD35A99B5A
+:1043F000502F063CF06E827369EC8CD0FAD775545E
+:1044000074E3F3759D92175961F0D09939B44FD682
+:10441000B715F5F87DC3ACEBBA62AEA7AC2B56A9C5
+:104420000C06604E94B38792C88EAD3F087C08D7C7
+:10443000F5AC44F730F66DB3D426D24FEA4BF9F71A
+:10444000185ED866661847590BEFE33E8EE51D33BC
+:104450005B106F0E4A6413063B4E2C477F7C70A3A3
+:104460008961DC565BDF8779D1DFE0FEDF5C6D625E
+:10447000786FB075358FC7BEB9D148E318AF3751E3
+:104480007DC51A9E277C64F5EFB6E6C2B86FAE957F
+:1044900028BF7ED6F5FF790CEB2BD6703D281E7F0A
+:1044A00007F0350E3F5704F47837044F1BBE1C9EAF
+:1044B0006E1BC4D3F12867E1DC67E720FEDCCCE8A3
+:1044C000DE62EDF923A61C586FFE56C58BA1DD32C6
+:1044D00063784B36F28523BC7DE2DABD12E72F2AE2
+:1044E000DD67CF6D3733CA532CE67C680F9E5716B5
+:1044F0006EAD5FC2BC362647F3717D2E91C7F5A421
+:1045000089D51E443F92CCF94BD933CEBDB17EA4A0
+:10451000F9021F35BE570AF6FE41F243778CC47B81
+:10452000E68F9BB87F6CB418AFB0A07FCE6228BB7B
+:1045300004BEEC17EBD0EADF10F8CF3AF6911C5D21
+:1045400068E1709FD71CA9C37DDC20071E43FEB71E
+:1045500060F42FD6A25C6BCF7FC913203F5709C9E7
+:10456000B5A0388F23D3DEDBB301F3EDC6D9E81C49
+:1045700017F7DC13C5736D74CB9467682D9C941387
+:10458000B8881F21784ED5DDDB6BEC3A33C79780B6
+:10459000AEAF13EB2D13F7F35817F71F003F96A795
+:1045A000960FF6D3F6AFF93DAC850FD2396DF826EC
+:1045B0009BC8EFEDDF417058B9F68484F752AE32F4
+:1045C000F94C7680F32FD2D872B4835F6A61744F4E
+:1045D000ED38DE570356F24A8B42F5A8B8B7F65AC3
+:1045E0008B4AE55566FFAB089FE52F341522BC8E3C
+:1045F000E4DDEDC7EF309C3E2EF459A6F07B8C0233
+:10460000F7CE76199905DACF1E92C2E43411EBBFCA
+:10461000E6DC4816007EF22B713F6E5DF3EBC4E7DB
+:10462000BC0D67E6A09D3171EDA9AD580F36FFE7CF
+:104630001CD41B7E037202F12BD82931278C5377AF
+:104640002E83DE5FD779C28CF6FCE386FE3908FF45
+:10465000D06189EE55059BCE10FFDC23FC2B69E36E
+:10466000781C31D835D140E7E92BE1F68938FFEEE7
+:10467000923FA722FFB234ABAFCEC073EC35D23934
+:104680006EAFEA4F55129CCB491817F3477E25F2BF
+:10469000F186F0597388FCB2B5026FE3DB93C7195A
+:1046A000343BDC24F2949804EBA913F8558FDF8394
+:1046B000C9403D5F8AD8806EEBBB66917FA3BEE99F
+:1046C000E2DF77190EDF2EB56C64DCBFA1D5D1FE19
+:1046D0008ACDD742FB4B7F0F3DC4EF71E5B9730222
+:1046E00017D1EF827D23297ED2D8CE285EB2EE5C30
+:1046F00009951F3D7B1BDD7BB2D8FAEF46B9C08A16
+:104700000CA4D7AF0BE9F59B4F4B381D7C5AC2E97F
+:10471000B8601CD8271636609F801D5284FA0ED8C8
+:1047200021A93D4C679FC43F27FBC422FC86A02ED5
+:10473000059E4CB0EEBF9454958ECB42BADA49F840
+:10474000CD00BF11AFE2F739651C5F9746CF2B7ADA
+:104750003E30A3BE1BEC4C4CCFE6D2CA2938EEB695
+:1047600061F2EFCE8B7DAEDBCD085EC1DD1904A713
+:104770000FD96E7F15E0E587B00EBC977EDAEF4F5C
+:104780004E87F74F07FCC9189FD3E8BF71B78DDE7E
+:10479000DBE65E9289DFD1982FF0FEA3CE59168416
+:1047A000F335BB39DD69F3FD26B22213E967B2A9FF
+:1047B000DF8CFEC9515DA75251AF9BFCECD24CA4DB
+:1047C000BFE1D639A384F3E575CD2397D3BD1FF898
+:1047D0003102DDDF24E4587073C48CF0BFA9991155
+:1047E000FE763FFDEB46A4DF8FBA921594931F3EF1
+:1047F000971C427E7FFA7052D80043AD15DF3FFA16
+:10480000D0D4B788F4C7678D94AF103CFCC7BB9178
+:104810001E834F27D13D9A9BBA6E3B83726E6DD734
+:10482000DC0F642C1FFBC7D2C3BAE6D1CB63F38B7A
+:10483000FFD8726024F2CF8F64CE276EEA7C8AF4B0
+:10484000D99BCE9F1D8FF9831F3EF79729C8CF8232
+:10485000CF9F9D827C2CF8D3B353B03DF84C72535C
+:1048600022FD646D29F79F68F2D1F586ACF3B3643D
+:104870000B79E06ADB5983DF29987C6219C501B4A2
+:10488000F6C985063FF69FFCF3EACCEB63DE6B8B43
+:10489000CA942F31E94475F2EA18BC4C2E35697E72
+:1048A000BA4BF38F883C04CD3FB22D2AF37B750DB4
+:1048B000C630E6F1AE8CF2F87BBCDF8431FFFC320F
+:1048C0003CEF35595EFC3E0FDE4BC7B8C8E99B0B89
+:1048D000C3742F3D6439EA8ED18356440D9124F47C
+:1048E00083742545501F5A11954F25C5F8457EA361
+:1048F0003CB905D5F81501BD1F23DE0F023F297213
+:104900004CFCA47E63C4A4C9A98530FF2FB6300532
+:10491000E33643FC23B55F253F4CBC9F448DDE65E9
+:10492000C1F75437FF9E8EA667E2791D4A40EF1506
+:10493000829E353A6A8B1AE81CDAA2551637941E05
+:10494000414787406C86302FA86BE94368A7B79D25
+:10495000BF2A19E1D5F6C61286DF8B38AD54590A45
+:10496000F1BDF35FB52CF70CE2C710FE318EF3C733
+:10497000017D601839F7A1E05BFF2879F7C13F8915
+:10498000BC03BBBA1FF937D8D52BB9DF83DBD5F110
+:104990007242E3BFDAB8AA38E7A1FCF703D25FC0DE
+:1049A000FE25FEAB96A8D46F54D7E24CB28BDF58ED
+:1049B00096A9DA878E5F207B0D199EA1E36BFA5AC8
+:1049C00030E43B6A413BC6C7F34F83CB24FA6E54B5
+:1049D000D02F919E1DAC3385B15D5B4F74198F0B49
+:1049E0002EF74AF41D104DFFD3F4C381F649D0EEE3
+:1049F0001AD41735BD30EAE77ED1653E13B55F6541
+:104A00000EE4944CC6FD59E9F9E4697C5CE0034787
+:104A1000D1FF79D5D724FA4E97A62F6AF819AF4F50
+:104A20007EDC5570D1EFCFED1178A9D1D7E838BA37
+:104A3000D0E4D47C81EF8D28A733514E7F66EEB34E
+:104A40000FAF77839C2E2DA1F718BD3FE9E7B23F4A
+:104A500091DD7D588C3B433BB7E80B95B8DE3C16A7
+:104A6000A5BCA8E1E467AEF0D30CD73EFF12E9F88D
+:104A700086927F2C1D5F57F2CF41C703FA9F39F111
+:104A80003EFF52527913E2AFCDD844F7A3D8CF4CB2
+:104A9000E4B78EEFA76AF6A4CC74787C34CF6C4070
+:104AA000BB27D8C0EDFEF674F555B24F5EE4F7EEC5
+:104AB0006F12F94A379E53A86CC70F8361FBB75C2E
+:104AC000E4B7B9F1C009930FDE5FB9519A88FEA02F
+:104AD000950DFAFDB467F9E6C6FAC1DB4774505C80
+:104AE00021F450818AE3D7E366D11FD23E328CB1E4
+:104AF000C746F4E34CC0E731F72D609E75E2F90C30
+:104B0000E1DF61717AC04FBBDF247F0FC685907EE5
+:104B1000CD5D12E585047BB9BFA3B18BF385F71B8F
+:104B200024E227EF8BFC8C60B395FCDB9A1EF181AD
+:104B3000E8B7E66689F4BD217A854F1F7759F7E01B
+:104B4000CF892FC6EB111987F838186F41BFCCD128
+:104B5000BC2912D6D7815D88DF250DAAEA95B97CDC
+:104B60007D2C4CFCC5A7F3A37CDCFB3BB223573E5A
+:104B70002BB14CD23BE2E22FEDF3E2E22FC78EE6FF
+:104B8000E23842CF50E03FF41FC6EB198D9D274C11
+:104B900068177C5E9CE59912BD5F708CCCFDAC63A0
+:104BA000BA2405FD4963049C2EDB662338CD797B4E
+:104BB0007526D2B9763E1F2DE6E7F5D19B9F54E2CC
+:104BC0007B53DE9615E4B73F7D73E3EBB9BCAE5A79
+:104BD000547C6F6332DA211FBDBD3E19E1F85328C2
+:104BE000F1FB48CF9C9413FA0F0B4B39BF01F976B8
+:104BF000BC84FCBFC26F2C837C4B19F4BFC4BF378D
+:104C00004BBCD78EDF2D42FC7B96C7B7DB4704E653
+:104C100051FD9E7C9E472C737C7DAA2B5D417DAF10
+:104C200014368B71D81FD9581BC657DAB3022F110F
+:104C30007DDC6320FC85F7F977270EAA24EFF08A44
+:104C40001DC63FC683ACB1505EA383FC37DA7761E3
+:104C500046801D2ABEA3B00CE3AEA5220E32DEC6EE
+:104C6000641C7F8729B07D1CC65DBA65EF267C4732
+:104C7000F666E27790E2E3315A7C588BCB6871E2BA
+:104C8000E1E23212CE339EE359EC774EB4F80BFBDF
+:104C90001ACFDF6C9DDA44F75F7B31469238EE32F3
+:104CA0007A5C82784AE938ADBF3E9EB6BDF849C20B
+:104CB000B72F1A47BBA164B8F9556E77C6CD3F2907
+:104CC000FDE36CB25FFEFA5FA924CFBACE92DC3965
+:104CD000DD9F24EE71F6713F759789ECF5D360077F
+:104CE00065C5C8B3F6717CDC9EAE59848F87A2D5AA
+:104CF000C9D8FF09F17CDB1BCB96A23E1D8ACA3CBA
+:104D00001F9B71BBE650549ECCF5832170BAAC2436
+:104D1000417CCA624B9C07F49EF017BC27F63DEB22
+:104D20004D6EAF0437F2F88122E82D5863267E726B
+:104D30002C2F5BD2FCC83989E20BCFF6139FAD5FF5
+:104D4000C3E3BB971C5FE8EC36B1FC047EDB9A3909
+:104D5000C46F2ED55FCBD00A9E32C89F2B4BC5F7B0
+:104D600086CAB8FFF6C5127E5F27A36962257EEF6B
+:104D7000EEBD61CF3B70B0F4D2E27CCF7B2EAD9F15
+:104D8000A138513C7068BFA997D86FCE25F6BBA15A
+:104D9000F8D2D6D77589E3EDBFC4F16E1997A8DFB5
+:104DA000FFA3F1CFF8F8667C3C343ECE99F4E2F5EF
+:104DB000216CBB4DBABD3F82D04D7DBA5602529593
+:104DC000D31FB4205F5B308DC703B6555BC27BA594
+:104DD000C1B8A806AF87CBB8DEA578CE84F0BB8873
+:104DE000A37DD1EA4CA0E3D3D318D90DA7ADE27BC4
+:104DF00048B23262319D9F42DFC369B7268E2FAD24
+:104E000014E30DC7475E29AB7CBC7432DD1F4AF842
+:104E10009D8AEA526E67289D8CFC354C56472CA122
+:104E200079D5112867D25EE0CF53238CF2FBA0DD49
+:104E3000B584F467D585EBDB25E25E19F38A5CE87F
+:104E4000A7CB00798B71913B303E427E7D85FA691C
+:104E5000F34DF2F0F97699988471ACD0389E57C131
+:104E6000D42788EF68718DE3A6C8EF574914D7E8B7
+:104E7000C5F5BF6C8878F6B9F8B9207C3D87148AEF
+:104E8000B7BC32EDE162BA172FE21C1B14DEE50855
+:104E9000DA19B08E0DCF5510FEAEEC99F6CB3AD4A0
+:104EA00007DD32C179881E2EECAB93C23ED4ECAB49
+:104EB0003EB41363EC8DB784DE9080AEDE2A4D40A5
+:104EC000A7BB246EFF865EE6F66F85D95B109B4F0D
+:104ED000F5BE80FFAA08F7C36A76ED785FD8900D1B
+:104EE00070A8B8D9184902395DB1B5CC8CFCBA624A
+:104EF0006B9E8DFC4AAB0F1A3478273AF78FC53A70
+:104F0000B7F5F6535CE2A9F87BE61E33B5EF15F86A
+:104F10003309CF16CA0D85722B8ADFB4998A319175
+:104F20005FBC1EF47E5CDFAA76BE5E2D0E521F5162
+:104F300067E13CA78EF66FC5B2BCC1358BFC866BB2
+:104F4000CF6C45B9193C7FF6D815E40730AB89EE34
+:104F50000B3C5B6624383C858A08C26BAE4C79BB3F
+:104F60001573653AEF8C7A2BD9E1192666C4EFAE3A
+:104F7000662CE672ACBCC6310BEB6C593AC9E1F257
+:104F80005E35FD7ACFA09D9F31776316C2E9F3E2CB
+:104F9000439ABFE02AB32FD333F98BC787D61D7F3F
+:104FA00083F2CCAEE9D3C787B478CF70F1212D3E20
+:104FB0001BACF944174F0ECAFD73D0AF52F1DC2978
+:104FC0008A0F073B25C5E91A8C1B050F9D31137C01
+:104FD00045BC08FA9BF1BD0A38F61119F8BD011E4F
+:104FE0003F7A1AF371CDF83D3D85F26E7F82F9B8B4
+:104FF00045F83D3D9E8F7B18F371CD78FF83E7E345
+:10500000F688FCDE60D7198A374DF30CC9A7A27861
+:10501000C42D927FA6479F4F45F5F87885D1C6ED00
+:10502000D060AF89BE771E3C6E213E5BD9B56A0C5D
+:10503000EA63DA77C81B315E10E35FFAC8E7B5E2CE
+:10504000FD9E8FFC5E2BC6092ABA3F30ABC4772287
+:10505000B998C2D42847CD68EF231C28CFAFABD274
+:105060008A70FD5CBF7EE7FFF7EB7F11BFFEE13288
+:10507000EED7D7F847B9DF40F7CACB7B7DD6EB63D5
+:10508000F8C3363FF70F6F73E713FDDDE5CF4F5FD2
+:105090001DEBC7AFE1F65BC65CB735F6B9713CFFF7
+:1050A0001E448694F87EC1768F61383D707B62FD28
+:1050B0002E713C605B0DE7239ABF7F687CC0FBA22A
+:1050C0003BC6CFFFD1CB16FA7B0ADDCF26913CFF42
+:1050D000F4B9A47DA87797D7AC1E9302F5F2934953
+:1050E000CCC5E5912EAEB0B2C6E0B3A6268A23F8B1
+:1050F00072E97BA1F1F1821A03F1F78178418D7C8D
+:105100008AEA423FBFE6CC7B29F8E9EBA7A4703BD3
+:10511000DA174FAD93BCDD6C68FC0006CE655361B9
+:105120001735DC4EF0D65AC82EF8BCB842DDA113B4
+:105130005BD04F3091ED6CC7EF4F4E741B14104590
+:1051400009E20A3CBFB35CE811F1FE01C40F94FB15
+:10515000F17EC1E7C5F93D2FE4FE5CD4F9B306C783
+:10516000D1DE8B3F77479974513FA32CE4565B4DBA
+:10517000F9363CB7D0020343FEDF56536571C78C46
+:10518000F79A87E7CDECC2388523364EC1E311F19B
+:10519000F1098D3F55747F3607CFFDAE2EEE3F0AE5
+:1051A0003AB93FB3E27025DD33195C27DFDF5DCE0E
+:1051B000817B86E98CEF8B59B89F8BFC0AE50B3E0F
+:1051C000E9C1BF37C0FCE9F4F70B82C7DDAD76E477
+:1051D000230BE4C9924AFEED017F37FAA396BEDAAB
+:1051E000300FF3812B964F3C81E7B2BCCE44794718
+:1051F0004B5FADA5EF8A6BF2AA62F9DECDF8F768D6
+:1052000096174B5EAB8AED3555D83EFFB1087AF65E
+:10521000D8425C1DD04BF438F4CE27FFF6C7483790
+:10522000158B85DFBB8ECBD5E55D8B4DFCE3567AC8
+:10523000397724EF53B29BCF7655903F3B13E3ADC4
+:105240009E413953F11CC89F9441F9F3F7CA1D4799
+:1052500019CFF39F00F207D793B198C705E3CFFFAB
+:10526000350F3FFFE1E4C970FC13E507FF7B3BA16D
+:105270005CC939287755B4A72F1B94BF4A27D4732C
+:1052800086C7BF7902AFD387D1BF660BFC1C365FE0
+:10529000A3F31FE3F7AE2CFB27F17B0BFB46F37F59
+:1052A0006BF6D07D02CE5AB947F08DBF3B5F1985B2
+:1052B00062C27CE58CC4F9CAD77448F41D1691AF5C
+:1052C0007CD4CC2A0F3A304F4FDC4B08FB49BF3916
+:1052D0007AEFAFB63EE2C07B09928262675DC70992
+:1052E00092CFEB409F213DA8EB8FDC2FD5C1F34B34
+:1052F000D775EAEF3F68E5112197AB613FE44716A8
+:10530000797C730E71BA0EFACC61D5857EA16FCB14
+:10531000B17EA1A01ACDD2F203C35C2E25CCE36BE3
+:1053200064FD94EFD7D82079511E7C693F918FE7B7
+:10533000F75DAA9FA8AD4CF885849FF99152CE0FD6
+:105340006A039284FAA8C5E05F4BF9BD8725255111
+:105350009EE8BD02DFE70B3FED7E33C783FDD3251B
+:10536000CAABC57B3178BEFB0FF3FCF9FDE53C7F92
+:105370005EF3CB6A79F1E306FDB2741F46CBA7D783
+:10538000F2E3B5FBA18B77DB22A85FEC3075389197
+:105390000EB5BCA2F9A88B601C467C673C7E9D5B69
+:1053A000CB2AE79751BF61F59BFD6509F49B33421A
+:1053B0007E3E56A6CF238AD1CB9F289BACD3CBA9C8
+:1053C0001EAF97FF4FF965E70CEF17365CA2FFEDB4
+:1053D0005B97D8AFA12C817DDD6A4DFCBDD0D4F1A7
+:1053E00082FFC6FDBD1136E47E0F976FED92FACBBA
+:1053F0001914E732519C4BE32FED297CFCB7055F74
+:10540000D1CA7382DF0CF75D49E378DE6FA3E47BDA
+:105410000BCFB1F480DE4F56D6A1F7934DE8CCD038
+:10542000D5274646EAFA57F4E6EBDA27474B74ED00
+:10543000979D2CD7D5A7F54DD7F59FF17E95AEFE5C
+:10544000957EBD9FEC8A734BE2EE1D71FCAE048C21
+:10545000887D6F96E5EBBA7EB90DFA7DE535E9F703
+:1054600035A659BF2F6D5C5748BFBF8276FDFE320F
+:10547000D07FEFF9F2FEFB4D1E55F8EF0BE8BB7F36
+:10548000BB6ADCF49D6BEDFE9FD6EFBF0137C3FC1A
+:10549000BB80700000000000000000000000000061
+:1054A0001F8B080000000000000B53E16760F851FB
+:1054B0000FC15BF918182EF021F8F4C01CCC0C0CAD
+:1054C0009C40ACC8C8C02001C4FC40CC06C49E0CA3
+:1054D0000C0CFF81F81B10BF05E22740EC0CC40741
+:1054E00058B09BE3C6CAC0E001C4DC40B3789889D9
+:1054F000B7DF8917C17ECCC3C0700E889FF1D0374B
+:105500000C061B5E27403FBB7E43ED3A2932F0FE7E
+:1055100006612131609A1447F0A78AA3CA0B8B2138
+:10552000D8C9D294D9950FD40F00F19321F08003FC
+:1055300000000000000000001F8B080000000000B9
+:10554000000BED7D0B7C94C5B5F87CBBDFBE92DD16
+:10555000CD26E44900370960501E4B80C84BDDF072
+:105560003252C40411828A2CAF10027914A9A5FF0B
+:10557000DABB0B2804AADE5851A37F6A17041B2D3F
+:10558000DA80D11B6DE02EA208D56A684551AB0DBB
+:10559000888808498C8F6AB57ACF3933DF66E7CBC4
+:1055A0002E89B6FE6FFFBF7BC3AF1DE79B993367A4
+:1055B000CE3973E6CC9999B3268385192E60EC1BFE
+:1055C000FCBB9C319B893136A62B6D573A86AB3993
+:1055D0005DE5B7F9BDCC6B66ACCE6FA5748B3F9D16
+:1055E0007907C3779FA1306867EC5EBF8BF2BFF08D
+:1055F00017525AEB2FA27A77FA4B287FBBDF47E985
+:10560000667F197DAFF157537E837F0DA59BD445EF
+:10561000692C05FA66458559C98C553D9393B71990
+:10562000725B668D4F504743FE15233366017C9FA6
+:105630004AFD31D5BD69E0E8AE7A1A9E9BD449FD9A
+:10564000104EED128E17B3325B8C7A5938CE3B97E1
+:105650000878F6D69A9CE4A8F50623BCDB4B00DE5E
+:1056600050287085AC39D1E15D8CF03697A8BC5ECE
+:1056700072B0263B3A3C0FD6ABB941C04B0F5863D2
+:10568000D41B83F536DC20F0EBE7ABC98ADEEF787C
+:10569000ACC75CEADF5AAD8CFEBEC9C6FFB7BB4ED5
+:1056A0005D2CF246CC263136AEAB9D3E652CC070EB
+:1056B0009C2AF315121FDC995F7F93CFD84D0813F6
+:1056C000DA0726B19011FA0F24B1E0FA2CA9FE4CAA
+:1056D000AADFDAF7EB6F52A5FA014394FA26D6A0B7
+:1056E00060F9CF518E80EFF7F97329DD28E4E7BE2A
+:1056F000A106C6B05DBA393808DADDE3F790BCDC44
+:10570000ED1F4BE5770939FC7721674121670FA22F
+:105710009C41BA15E5CC8CFDF95A4B014EFBDE7865
+:10572000B6D94DF2B598F05419C1DFB077C8F6CDAF
+:1057300000FFBE1B569DDE06F46F6B1EE63142BDB8
+:105740007B866AF2C5BC2CB9ABDE3DB34F38170D72
+:10575000257A97219CBB3D827F2A0C2CA2DEDD336B
+:10576000C2F52AB0DE5D9E30BC5064BF774D09D7CC
+:105770005B457C56584983BD3B5F763085E6230800
+:105780000AD1D784F48579F9EC80EB9456689F921E
+:105790009C97C6A0DDFD381FCD38EFDC4417AD3D2A
+:1057A000D2D907DF332CAC1AE10365F71B015FD3B5
+:1057B0006C7722D2E5F66B8B98328CB1BEA23C3569
+:1057C00050A464015CFB9C2205BF9B6643397C7737
+:1057D00089F2E435BCFC762C7774952762397C4FCE
+:1057E000AA8672C8DBE7F2F23BFCC089C15DF536E0
+:1057F000019F7DC4EF74FE1DD88AF4318DE6A98621
+:10580000F713282440BF83988EE9C27FD3A07B334F
+:1058100016DABBF0B50DAEA7BC86DFA6C17194D772
+:10582000F0B15DD82F6321A47D97F465DE5C311F54
+:1058300058773A277AB3A5F24CD593A0029D325FF0
+:1058400032B200B02013C413E1E9DB153103E1D912
+:10585000E3FC4BEEDDFC330D95E9A0A547053D3497
+:105860003A6CEC2FD3C13240A6C3C601321D2C17AF
+:105870009C9F0E3B989BE81C8B1E5ABF9B87C8FDC4
+:10588000C65D24F7BBF922B9DFB88BFF39FDD664BA
+:10589000C9FD5AB3E57E6BB2E57EAD39FF58BF4C0A
+:1058A000F5C064407DA5FD5D28E9B7AB99EF2CB646
+:1058B000473D87F349D373A6641FF3D9BBF809EBBF
+:1058C0001463F99170064B7A15E07C8AF5008EF727
+:1058D000FC705C3A3883F470BE16F8B0483DDD0DBC
+:1058E0000E1BA81F8749E1ED428688FE99EA6345B1
+:1058F0008EC8761E5DFF39FAFE9D8A1887E1BCFDD1
+:10590000BB7574CDD6E39326F06186F3D183B97469
+:1059100070B2F470DC029F90725E386EFD382E1407
+:10592000FD071469FD027A0CEB6AD70EF8D13A959F
+:105930006709EE04FD10DAF7E5295C07CE355EEB6A
+:10594000B640FDFD232DA1CBA1FC5CB0206881F207
+:10595000C94F1E75A21D53F1A451C572C33E1BADA4
+:105960002F6D3B142AAFB2B4DC3901CA3B9E34B26E
+:10597000EDD45DA601C7774AE81416E2F9521BCFB1
+:10598000566CDB7F23B62F6BB2301BC0AB787AD955
+:10599000CC09905F76C8C4B04AC5CEB5E6BE905F6C
+:1059A0001E541A300FF8D23A15C8B3057742FD7568
+:1059B000FBBE6C43FCCF359A06213E67609D70C3E9
+:1059C0003AF192A3257536D0A73CB87B1AB62FDFE3
+:1059D000A57840C301FE3B0F6620FE8F281E0BB04A
+:1059E00070457D3C7347CC97538D461AEFAA6D4A9C
+:1059F0009001BC65AC761AD2B302898378782C41C9
+:105A00009BD235DFCEF8EBA83F2D5FF108F407ED10
+:105A10002B1F573C38E44A03F3E13C6E7BDA56F225
+:105A2000901DC7BBD63CD881E3DC68C67ACB820B1D
+:105A30009FB2B911CF6DE66988EFD66DE6D2A14865
+:105A400047B6A06828E2F77F65FCEA8C5E1CEFAAE7
+:105A50009196ED46C083D943036739BAEBD933B089
+:105A60005EB923D6CF72067A9FD6EFA0B97858D701
+:105A7000F72F0D89A43F56D41B99DBDAD58F261F4B
+:105A80008123423EF63A88DE1A3F57B9F814D0F81F
+:105A9000B92A51F057EDC89F35AC3B3E77225FC81D
+:105AA0009E7651FA0B583731DD02EB3CD2EF5EB0F7
+:105AB0009FDC64977BE8FB03602761BA15EC244CFC
+:105AC0001F043BC92DEC24ACB71DEC244C77809D02
+:105AD00084DF1F067B1CD37AB0C7F1FBA3608F6302
+:105AE000BACB1FA0EF8FFB6B286DF0D752BA07F926
+:105AF0000669A33F48F59EF2D753DAE46FA0EFCFD3
+:105B0000F89B28BD5DD0D1399115E03AEAF43217FF
+:105B1000923D6986B7C004F9A4229E4FBD21506012
+:105B2000867CAA0FF24097BE2B430516C8F7ADE658
+:105B3000E5036E6193AC901F10E0E5D9B77B27D9E0
+:105B4000209F5DCBCB076F0D4C8A83FCE0202FBFDD
+:105B5000685768523CE42F6AE0E5C39BD9643BE494
+:105B60008787783EEF25EF6407E4F35A783EFFCF4E
+:105B700081C94EC8E7B7F2F6E3CF068DEE28EBEF0A
+:105B80001E937B31AA9C03CADB5E3503F266F74D98
+:105B9000A8128F2AA728DF68F252F9FB4ABB578563
+:105BA00075BED1ECA5F22F94CF29FF94C947E5F13A
+:105BB00006A580F2661F95F737C451BEC914A0F23E
+:105BC00011863E3C6F0E507981A15F01C27FC614E1
+:105BD000A4F26B0C8378DE1CA4F25FA8C30BA64072
+:105BE000FDC70DBEBDA8EFD62BBE32B40F99DA901B
+:105BF0008EFA4AB32B77E2E0D0CECC30D33CD8F348
+:105C000087FC87681EE05F32E64B1F46BB14E01C32
+:105C10002438268063EC194EDECB632538792F9724
+:105C200069705E2138B6DEC1D9F3F278199F97CB3F
+:105C30003538C7088EA377E3CA7B65A28CCF2B2BA0
+:105C40003538C7094E62EFF0693C2AD3A7F168984E
+:105C50003E67707D589FD23B7C46BF26D367F46B6E
+:105C600061FA7C4CF864F40E4EE36B327D1A5F0BE4
+:105C7000D3E72B82D3BF77E31AFDBA4C9FD1AF870E
+:105C8000E96332209CACDEC179EA6D993E4FBD1DBF
+:105C9000A68FD380F419D4BB71E5BF23D327FF9D12
+:105CA000307DD2089F21BD83F3D43B327D9E7A277D
+:105CB0004C1F37E133AC77E3CAFF8B4C9FFCBF84AA
+:105CC000E93384E08CEC1D3E4DEFC9F4697A2F4C2A
+:105CD0009F3C8233A677F88C3D25D367ECA9307DB5
+:105CE00026109C71BD83D3744AA64FD3A9307DA6DC
+:105CF000109D2FEDDDB8C6BE2FD367ECFB61FA5CBB
+:105D000045700A7CF5840F03388ED8709E3927D3EE
+:105D1000E7997361FACC213853014E4ECF70C6B764
+:105D2000C9F419DF16A6CF02827365EFE03CD326D3
+:105D3000D3E799B6307DCA88CE57F56E5CE3DB6554
+:105D4000FA8C6FE7F4A9B278263BD0BE4B649EED87
+:105D5000D0E492930D079C9037D99907C1BEA484D3
+:105D600076207C582BC92E543D9A9DE2616887CEDF
+:105D700070BA3DE8F7316AF6086BA1FD827D57A243
+:105D8000E40FFAD230E916C4D701565BA45D923015
+:105D9000364EB28712BD4952BE4F615FA97E4A514D
+:105DA000B6549E567291549EE1CB93F29965E3A549
+:105DB000FAFDAB2749F90BD64C97EA67056649F916
+:105DC0009C9AEBA4FA836A1749E517D6954BE543ED
+:105DD00082ABA4FCC5F5FF47AA3FAC619D543EA22F
+:105DE00069B3543E32F40B293FEAD00352FD312D02
+:105DF000DBA5F24B8E3D2A958F6BDD23E5279C7E3C
+:105E0000466707CAFBFFF5058CDB831966B20743BB
+:105E10000E33E5CDFB6C64FFEFC73CF0D3DC7706B7
+:105E2000E5CDCF2E7627E37E1A01C07A5FD0B7EC9E
+:105E300042F4F7DC3CDE77A10BBEDF6CF68D7045DB
+:105E4000F1477854DF3E03F98B5A14968EA9DB8014
+:105E5000699C51ECD72D5CBE3666E53F148890D323
+:105E60009AFE30FF207FD86026FB5593EF8DFD4BC7
+:105E7000D31746F4B3A1BFB964FB50FE7DB11DFB3F
+:105E80002B7A11E75995B96330E2A5EFC7923D56D9
+:105E9000EAC73AA08CFA790DFB89F07B590694E9A0
+:105EA000FAB1966C17DF453FC7705CB1FAD9983DDF
+:105EB0005E1ECF8072EAE75D5D3F1B0794EBFA89B7
+:105EC000E3E381EFA29FF7CE3B9E9C89F2782E58A8
+:105ED00049FD74E8E866B960A5AE1F3BF583DF179E
+:105EE000933F17760169C0674B4729C9C17FDA58CC
+:105EF00000E4C29C59FE6BCCB3B76C6C10F6E38621
+:105F00007EA11ECBE5FEA3A70D49349ECFE280FF04
+:105F100011766AD77E3640FBE2A5024516048C60F6
+:105F20007F5B296473C9AEE20137B9216D3A30F065
+:105F30006EEC678BC33308F26D4D93CD8BA3C8D342
+:105F4000D25AD3A9D648BF88B6BF99C472ABA1FFB5
+:105F50005D369794D7D2958A8B097F04E54FC0BEF2
+:105F600085C17EE0CFB02F6040AA774D7C9FF60EB2
+:105F7000EC6F30DF0AFB1B2C676C2DB53B21FCB4AA
+:105F8000276E578248EFCF7EF24313E9F1007B354D
+:105F90003D15FD6EFC6FC19A78F4F187F15B18E84E
+:105FA00023E5415D661AD2695F48FBDF8EA72DC1EC
+:105FB000ED48D79A4CA0A9A897CDD8EBB0C9CD4849
+:105FC000A26CA6612C63B3AB8BA7A6D12C52FAAFFF
+:105FD000023C67358E34410BD6666ABDD163EF82D1
+:105FE000CBBCA613481F2BFC4338D714423EA2FF5C
+:105FF0006B8BE4FC5CA676E581DF838DD9826FA292
+:106000005FB7D7847C2D4AE5F8CCC5340F8BB9BF78
+:10601000A3C4C5DB6AF8542D36B110ED4F03290C2B
+:10602000FDD18164AA779DB6CFD4E15762B27A8B55
+:1060300080AE250B8D44573DBE6FEE8BF71A86431D
+:106040005A73B7095D9B3DE13FCF2797B332DE9F7F
+:1060500046574D5E4E09FE9E40FE43FA3EF21FF04B
+:106060003E29F8DF25C79CFF5516DF4CE47FC7FDAE
+:106070004646FC127C9F23F8BEB456E6FB1CF49304
+:1060800043FD39ABB382EBB17E5D1F89BF307099A0
+:106090000EB5774D05B5DA0DFFB7851C5C57B3FB20
+:1060A0007964EFF565BAF1093EDC28F8305F478F77
+:1060B00039826FF305DF96B1C06D19E43F0A9AD0BB
+:1060C0002F36AF4C61A82FAA7EAAF1AD55E29B4FA7
+:1060D000E39B0EDF1B05DF6EFC09E79B1EEF56C13D
+:1060E000B7D6BA8F4D2CBB3BDE7A3C17ACD18D2B8B
+:1060F000A0E75BAD38777099D1DE29F616F439192F
+:1061000051FF9AC22BFB9C8CD00BD716154BF9B9BB
+:1061100025F3A4FAF37C0BA5F2EBCB964BE5F3AB9E
+:106120007F28E517ACF989547F6160AD54BEB8662D
+:106130009354BEB4F62E29BFACEE7EA9FEF2E03633
+:10614000A97C45FD23527945C36E295FD5F4B4542B
+:10615000DFB06FC8D5285F2F1D3532F4977DEA79FF
+:106160009FFC759F7A4C1EAC538932370EE5D94D92
+:10617000F27CCA9F4BE969BF87E4FD8C7F2CA56D3B
+:106180004D07ECE87FAC8A03BD9F0876B8F1CDB52A
+:1061900035FD70BD81F6E3196B36B6AE0D40FE00DD
+:1061A0001E46C1BC99516766A1510CA4BB6F589E95
+:1061B0003B8C11E5AD3D94D7A92CD4A77BF98CD6A7
+:1061C000E8DFDB958EC119E8277CC3C27646F8EB81
+:1061D000BA9F57B04CB42B62959F35B0B2C8F3ACA0
+:1061E00093467E4EE2344E3A698474A599CFFF956A
+:1061F0007B32263127E64383ABA3F85DC2FD350031
+:106200003269C8E71C69DE2FABBBB86B9E33EC2745
+:106210009BE476797094F47D45FD04A95DAEE27B44
+:10622000D708F5CEEE37D27ACD4207065C330CF1B3
+:10623000F39EC4EFAC2985ECAE16BFB7CFC9818CF5
+:10624000FDD15F48E9ABFE224A5FF397507ACCEF6D
+:10625000A3F44D7F19A57FF65753FA8E7F0DA5AD98
+:10626000FE00A527FC35949EF4D7527ACA5F47E911
+:10627000697F90D233FE7A4ACFFA1B286DF33751EB
+:10628000AAE9CF9EE4EFB4585FCFA0FC459133F369
+:10629000AD6C5DCDC42E398B532DEB50CE34FACE80
+:1062A000A8B308794895E42111D76192B31ECAEBCF
+:1062B0004C420E63B58F5E8EF2D6F77B9037C6D612
+:1062C000911CCC1472F75DE58DA1373E05E529538D
+:1062D000274FB21C6A72A4E9815CA568B83AA64B44
+:1062E000AE661AB99DA4C9D5CFD14E8C626FDDA020
+:1062F0002A62FDE3F611F36518D07E5B25FCFECC27
+:106300009D4EF94ED1F77A00D782F5D4602EAE2398
+:106310009DB97F1B8CFEF1CE6316867EF858E3D3C1
+:10632000CB4B6CBA7B69FF501A84456D54F7725B96
+:106330001CA7ABCDC00A591E9ECFE61FF3013FE359
+:10634000FEF3E23CDCD7C27795915D15F41447F17A
+:10635000B73394F1B49EE9ABD53FF5C097F9786EA9
+:106360003E53CCF3B803467EAE1D7AC8734DC4F9D4
+:106370000CECB7D3D1EFDC31C8EC22FB21D457A60B
+:1063800063B0AF44C703833E1B8CE71B9B400E7179
+:106390007E750E1C9CC0CE231F3DE9F99EE8B928EE
+:1063A000D8B797F434333C37027A6EC7FB2FBDA5BC
+:1063B000674F7AB227FD786233A7B353D8A7B1E805
+:1063C000DC3E09E65D1439BE475565396603F97947
+:1063D00087467FDC9746D0FF52BB9BEA3FB7EFADC5
+:1063E00001ADD04F67E385098C9FE7905DD7F1A49D
+:1063F000B0DBDD99321F5BFB125C0DCE734FBE3EEE
+:1064000000F7C9B76106E6D993F145BF5253BAE028
+:10641000F5F61C3ED6B8767FCBF9D99EAACDCF969D
+:1064200001284F9F093D10737C3DC9298E0FE05C08
+:10643000A5F0F16D3016FD0EF54C787CA3537A353E
+:10644000BEAA04335346007E0EB3992530B643F5F9
+:106450001D54691FE7690DA09F625FBC673DB0A432
+:10646000CA79E6E5901BDBC9FE8C15F536976C3FC3
+:1064700025BA64FB29C315693F751E7AC8E903FC78
+:1064800056A51B5C2747E13AE715EB1C5F5735FC27
+:106490002A1AB25C76098E9CEFAC550A1B489EDC2A
+:1064A00009B3A39C9769E9AA74B3EB24AC5767EAD4
+:1064B0007312B0DF337EAB8BAFAF2E17EF37DD1526
+:1064C000B9BEAE5C1347F535FC62C1FD67E3C75842
+:1064D000237BD78AEB2294E5C4AE1F939FEA2766FD
+:1064E0003A976E367D86F6BB2D57B3DF55CA6B7073
+:1064F000AB1A8C01CB08FCBE4BEA0FDAB9B5336698
+:106500006C175B6E54764AE327F0DF8A07EFB46FAF
+:10651000B5129F7D003101E0B5ABF61A94AB132A9A
+:106520009FCF55424E2BACAD669F9BC8DD82F2BC1F
+:10653000682CD326CCDCB7404F7FF0A289EE69B13E
+:10654000AF007A7ED7558125ACC8894ECF458D2BBB
+:1065500066E0BAFD8141DB0FD7E6E3B8CF314321D6
+:10656000EAA573EC8FCE5111F3758889FB63580D42
+:10657000DFE704E01F8E6F69ADBCEF595627E74B8C
+:10658000D9AC54D4B7A55B4C2C08B82FC77D933633
+:106590006ED0BF1926EED758C6AA37E03EFD5E136F
+:1065A000F7F72C72313513F0AAF88F5FE6A3DFC737
+:1065B00063E27687769EBC3C89E35D3E3B68F642AB
+:1065C000FD771B47CD018D0BED831BC8FE29669E11
+:1065D0009DAC3BDD17D7C8F8F584BF1E5FCD0EEA32
+:1065E00076AE2DF048AE57BCC1287AEE329322F633
+:1065F0007F7C7ECC36C9FE9C7926D9EFA3C9814920
+:10660000C8C109D577B5690CE73BF251513BCCBE07
+:10661000887AE6AE7AB3CF57CF82F58C546F9E2935
+:1066200005EB754CA3FD3103791ADA55CFD605EF8A
+:10663000460E4FAE57F11F8F3D15007929FFED3DF6
+:106640004E06EBE6076A6DAA07BEAFDC799BD30B5B
+:10665000E96935E0447E7E10341646A3C796303D86
+:10666000BC7605FD69423E594D80FC149FED34B95E
+:10667000C8CF5F6F0959404E2B1B97CF60C3297F4E
+:106680009CE7377E64C47C93CCAFF25FDF93EAE68D
+:10669000F76CB83F8985C8CEADDCF1DE345C2FAA3B
+:1066A0005807C999BE1DF6FF7912CDEB85E684EE39
+:1066B000E58027F913AAC42CAB6AFCF9474627E604
+:1066C00065F92813F62AD209F7F9B7991CC9A7E288
+:1066D000217B09BB04E7B9460F16E476EBFA47EED7
+:1066E0001B7E1CF039BBE345A73234523F7039EBB7
+:1066F0006C58FC2BAB21B61E6903398CB48F00306B
+:10670000B57337097BBB99A72B4D2127DE6759B994
+:10671000CDE40109642B1F3332BC07C0DEB004D1C5
+:106720002FBAE2B1E75F1B0F745FB1DB943C830FBC
+:10673000C7AEA476F1A50AFEB726AF8B0FE54F3C96
+:106740006F760FE3DF6F49EAE2C78ADDFBCD6C5855
+:1067500077FA4D6ED86F6EB547E14BC3F169B8CE8D
+:10676000AE7FE4AF66F4277EB04F616959DDDB97F9
+:106770006D7B9ED63BA413F151F029CCB76EFC0A79
+:10678000CD7C6634D573A11E8CC5AF6542EF823CCB
+:106790003FFE0CDEFF79D3E2C1F1973D7E9313C734
+:1067A000F1BE5ACDE5FA97B7A5E2FC2E3305525D4E
+:1067B00094F2EF650FFE88E46DD9911FA592BDC0DC
+:1067C000BC1906D2C5810C1CDFD2ADD7D2F84A99CC
+:1067D0008FE4AEEC97C622BC8FF8A9CA0A77479916
+:1067E00017716685F0797F3B183230BEF7717F896B
+:1067F000FAEC8F46BA17C5D80FE9DED88FC45861B6
+:10680000E5A3FCA756CEA7E3424FE24496E475C742
+:10681000C616E4CF99FEDE343CE7003A0404BD948A
+:106820006F00AEF1C8D434CE1FE656F3453BD0EF2F
+:1068300093F13BD66F31796DC3A576421FF2FE57B7
+:106840008BFE01EF385CAFDE4F8D6EEF8D11E38371
+:10685000BF1616215F11F39BCFF71D9BF8FCD6E600
+:106860007BB0B810CB3F7995CF1F6C87EB03E01559
+:106870004AA3F2FDB315D207B0AF8E36AF7798C4F6
+:10688000BC96CBC152A4F51EF0569584483901F848
+:1068900049447FDA07976E817611F65715F647F56A
+:1068A000CC5DDF23D68765420F98CC30FF2FEE9A60
+:1068B000FF6C2B9FF73DD9932B4DC1871FC0F9FA71
+:1068C00086C51370E37C3515E1B83FDC75E0B5EBA8
+:1068D00040AE3F6CD0E6A9AC3FF5F3B46CCF1816D0
+:1068E0006D9E7E6887FD55B4790ADFA3CE537B2B5E
+:1068F000C9F1F7AD3F35BA0D35CB7A13F5E033EE7C
+:10690000D8F4D3EBC1DF9BDC4447BD1E84BF57598D
+:106910007E77B9D3E44D93B3F2DF545C80FA262C32
+:106920008F9ABC85E5519337FD3865BAE9CBFF2ACC
+:10693000F4CDF5D6C26BD02EB67630DAAF14CC36A5
+:1069400006719F6CFD84D17C9F74433CE5E71A5B24
+:106950009F409BEFAD8AB9C3701DBF9E054CFCDC08
+:10696000BCD64476EA57DF7C3311C6739DA0EBF5A5
+:1069700040E6AB800F25AA128A033CE7A92C909031
+:1069800084FE62859D88C0E3FA32398F7F97A576B1
+:10699000C1E9A9FEB7B5ABBF6B7AC4CFCFAEFE8459
+:1069A00029ED2FC0708E90A3E2667E4E51355A09B4
+:1069B00066D3FC6B558B22F6098F99B99D7164CA19
+:1069C0003563907E05738725907CD70EA17D6095F9
+:1069D000D05B9D017702EAF3CEE61CDAF7751E5A0A
+:1069E000ECF045D15F07849C3D2FCE59DAED4AADDE
+:1069F00011E4BD9D7590DD12B0DBA2FADDEACC0694
+:106A000061EF08BEC19F11FA2F1172380F9A26E468
+:106A100045F06DF6551FA8CEEE7CC0BF1311FB8666
+:106A20007F94BE28D748DF03B6D6694551FC338F23
+:106A30000A7D7DD9B35F98719D9BD25CA0221DA772
+:106A4000D88D92BF63BB365F87B2A188D765CF2E42
+:106A5000BF630CC871D521A3C706E3AB6AFEC8ECBF
+:106A60008BB27FD3D313E1A3FDD86AE6F6F151537D
+:106A7000D152A4EBD16BF979EE9FCC9E8A6878CE87
+:106A8000B6723CE7B1A24F472BFF7AF42D98EB0882
+:106A90004D027A74DAF9FDE4EEF2C7E77DA74B09FF
+:106AA000AE55500E8D3C9FCCEFFF4E63BE3B262A69
+:106AB00034DF2F8FD45F054DC58FE17D96CA66C543
+:106AC0006580F24AB5D58C725CD5B45B45BBFC07DA
+:106AD0006EFECE82A9D5C36647F8B75ACDDC9F7447
+:106AE000E06FD7CD47FA7E3CDBC2102FEFD08F9CF2
+:106AF000B8DE7FDC3C8AE641AC71FDC1EFB9660AC5
+:106B0000FAE3CD5C9FE9E5615A72BC94BF7632EB43
+:106B100087E7BC97595A6FF244E1DF3A0B9FA7BD54
+:106B2000D66FD6FF61FA6D22E8372ED7A648FD361C
+:106B3000DDC2E53E42BFA545D36FABD6BAD3502EDA
+:106B400056EDCD4943BEAE3ABC34259A7E7B41EC2E
+:106B50006B0F8B7BD2EDFD40BF8D88D06FFD40BFAA
+:106B600045F1838FB66876670FFACDFADF33FF5EA3
+:106B700040FD1665BC5708B9D3F45B61F35AD26F78
+:106B800085FD8CD27DA4CB2CC28E8BA9DF16DE7343
+:106B90002DE54D9EF828F2837445FD7658E839ECD2
+:106BA00007F5DCCF2CDF4ECFCDB3727C7BD473FFE7
+:106BB0004D74D6F4DCAAFE0AD92FDDE590EBB95569
+:106BC000595CCFADDACBF5DCAA415CCFE9F5DBA4AB
+:106BD0006EFA8DB7AFCC85F6B44FCCBAEF06BCCF0A
+:106BE0005762F258A1FE0CB7F6BEA07A4CA4BEFBC9
+:106BF000992586BEF380BEB3F7ACEF5E417DA792C8
+:106C00001E1B88F3482F1FD307C64BF7D58E7E7106
+:106C1000EA37BFC5F9F20723DD077ADDC0F743FB8A
+:106C2000BE38350AE7DDCB880FCC979D42FEDAFCF3
+:106C300063499F4E1ECAE77BC5A1385A272A1B15F8
+:106C40003EDE5B94A01BD781BF7D4EFBE4F97BF950
+:106C50003E79AE85D383FDD8C8DF4500091646C806
+:106C600043C9E7E5E4E72B519915EDD70587A67FE2
+:106C70008076EB82CF6BC8DE5D80DFF17EC5EED61D
+:106C80000D99D0EFFCE50AED3798B80FA1DD97B864
+:106C9000BE793FDD5FD1DF83D0F4F9FC6AF9FB02F6
+:106CA0009D5D7F408C13EC59A20B7BC518D53F77B7
+:106CB000404F0F0F1F7FC56A6E1F87E901F4712BCC
+:106CC000DDE9011C9DB130B56BFCF39F8471257724
+:106CD0008D4BA3877E7CDAFE6481981BB1C6ABD155
+:106CE000AFDB78357AEAC6FDBC45D84517B36138C5
+:106CF000CF5E37F8EE188372F17B183FE03367DE22
+:106D0000A0B4483DFCA2D0E757F98E4F497523BD8A
+:106D1000F8FBBBEBCA763F9F0AE3B8DA9B9587572F
+:106D200011AEFD9BD9877E8403B60ED26B9A5C5D53
+:106D300068E572FE7701E7685FD7145A3F9A141727
+:106D4000CD97904E6F897B6155404F9C8F554D621A
+:106D5000BD0179C3F9364D5B7F90FEF09F573573C7
+:106D6000FA57552B44FF99ACE320D2B73259F1843E
+:106D700000D4B4A6DDB7E13DAA176CF01DE76D990C
+:106D8000E2D9CEC961CF488D2A976A34B964D54318
+:106D9000C8AFA0AD830BB05E12BE17793D05ED13F1
+:106DA000BDBD7199A5E528E271D98F4D6C1BEB6EC5
+:106DB0007F68FCCE857FDF44BBCFD383FC0E12F609
+:106DC000E50B486F3BD2B5C38C725F15E2EB86567C
+:106DD0005EA5BAA7107D347A37C1BA309AD31BDFCB
+:106DE0007DE9E979B5964779C6FACD8A09DB5F096D
+:106DF0007CE80345930D5F1CD4E417DF89E9E98241
+:106E0000FBFF8C88F98E7A29F2DCB1B2E908D165F2
+:106E1000FA6A30AB22E88EFAEA7CF4E9361F9AF679
+:106E200047BD07F56DE7C38556793EECB375BC38B1
+:106E300002FD5B7B15D207AC3951DADF5F61E5FB00
+:106E4000A603361FC96DC76113DDF7D6EB8DB1827E
+:106E5000FEB89F887C0737190782E7BB2E1B7B573C
+:106E6000C3239BCB4FA4BE7EC1E6233EC5823F4DCC
+:106E7000C08F652F85F1C5FEF03CC52DF7A75F2FAC
+:106E8000343F4F4FE3BA46ACF7DF755CE1F349D6C8
+:106E90006266DC9FBFDB1C71CE3447F8F9353F5882
+:106EA00044BD999631B1EBA1BF2504E37E61D74380
+:106EB000E4D73DF7E8F19928B72B7E676456E07375
+:106EC000DB2E070BF17B14665C57CB1B8D51CF4536
+:106ED000185B4FF8ADF8AD83F44AF91E4B7006B459
+:106EE0002F7FEADDE1E89F6A5BC7F54BE051211F88
+:106EF00081D6E1785E5EAEF2F3623DBC1F0B79395C
+:106F0000FB747C09EA47A59EBFEB2C6F986BB244DB
+:106F1000ECCB2BF1C08DD7A37BC8814714F28377CC
+:106F2000C76F2DAFF708D77BE54DA620BE0F2DAF5D
+:106F3000DF46FBD9AAFA8FCC68C74DFEED636447E4
+:106F4000543519653F61BD3164213FA6F138A67AF9
+:106F50007F5D656305CDC7CA06E10FD3F98B56FC8B
+:106F600076EF530120CD8A277EED443D73A665A7B9
+:106F700093FC70F5DCCFA6DAD5E87EB89EFC6F0DE9
+:106F80009BA2FADFCEE07FC0FCDB6A95FD6FACBE52
+:106F90004FAFCEC1573CF6E983782E7476CF870F7A
+:106FA00022DE2BBFFEF8C19FA27DB2CFE6C2F5AEB6
+:106FB000EAD1A3E457D7DA3D25E655DB23BF7EF8B7
+:106FC00001987F6D6F58E8FE55DBDEF707B8619CCE
+:106FD0006DBBBF4845FFE5EABD5369DFB2FAC9C9D9
+:106FE00069E7BB47827219ECC579889E0F071A8D35
+:106FF0000CDF419E3B66213B23EC476DA8E07E6998
+:10700000B7F09FEE8A7EEEA4F9FD2A1BAFB9FA52C3
+:107010005CF71A4D1E377D177EC09EFCA6AF023F5F
+:1070200047F4826FBB845F5CC7B773F81FC09F3F94
+:1070300059657FF3A78D4B7FF5009635F689E937C3
+:107040000DF5825EDAB9D636ABF71D2BCE873DBF84
+:1070500021FF34F20B6C6ED6F6D8A703D0DF70DABE
+:10706000D47123DDBFD86BA17B42E57B5FA7F9D14B
+:10707000F6E4113A2F62E25CA98D85FFF83980D8D9
+:10708000CB54ED70707FABA03BFA63DD4EFA2EFC63
+:10709000AE5C6E357F6C2C3F6C1F9BB8072ECED933
+:1070A0002A76BC65663ABFB63216F9745C3A17D4D4
+:1070B000C6AD87E7423A5C12799E10CBCF2DF468BB
+:1070C000984FFC1CA16D9B385F089F1B30D62F0F7B
+:1070D000EFBFF3F3EEAAA0F23A8B321FB5F304A789
+:1070E0004D371F83BD3B47E819DFEF460FC5C6F795
+:1070F000AD1A5DCE7E155D1F0FB129E2FD812FD740
+:1071000016B1EE2C10EB4925D08BBF27E3F89E1566
+:10711000FBBBB38F1A83B80FDED07080F4AA7E5EFB
+:1071200057B2E8F143C6DBB83EA96CDA3F1CF5CF95
+:10713000D9679F26B9ABDC75DC1C003807EB9F30A4
+:10714000B70EED9273D4D7C1087D7DF6F1FDC3F97A
+:107150003907DF47EAE15F21E05735CBF0AB767DB9
+:1071600024C15F116830BBEC3DF77346F5CEC5F125
+:107170009E6931515C94330DC6C268F14A86622023
+:10718000A9942E3A6D70F0F771C62433D991AB1DD6
+:10719000638F2524636A76E33E7AFD5A7E1F72FD73
+:1071A000CF3CE9C897F58973E81CA856474757B202
+:1071B000AB00F7D7AE2945A351ACF47A20D16B9040
+:1071C000F05EED284CC3F7DCB70A7B84A91E7ABFBA
+:1071D00067744E2BC471185D06972DEA3ACAE1997F
+:1071E000EC45142FC2E492DFD37DEFF11FDCFDE408
+:1071F000F80F817EFF68FC07467130FEDFC77F080D
+:10720000603FFF02F11F42E4B7D1E23F247FCFF19C
+:107210001FD63239FE83E06738FE83E0E7FFC67F82
+:10722000F8FF2BFE8331EEEF53303E8316FF21250E
+:10723000CE3C3532FEC38571095323E33F8C8B4B23
+:107240009F1A19FFE10771595323E33FCC8FBB68A5
+:107250006A64FC87AAB8515323E33FAC8D9B4879FD
+:107260002DFEC3DD7153A7CAF11F664E9D02F9B60C
+:1072700038DFDF71BD8A15FFE13D9C2C637A8EFFFC
+:107280000070CC716362C77FD0C38915FF01E02411
+:10729000109C18F11FBAE11323FE03C049273831AF
+:1072A000E23F74C32746FC078093457062C47FD0D9
+:1072B000C38915FF01E05C1497123BFE831E4EACA0
+:1072C000F80F006714E11323FE43377C62C47F008C
+:1072D0003813094E8CF80FDDF08911FF01E04CA541
+:1072E00071C588FFA087132BFE03C09949F8C48895
+:1072F000FFA087132BFE03C0994BF8C488FFD00D65
+:107300009F18F11F008E8FF08911FFA11B3E31E203
+:107310003F009CE5042746FC073D9C58F11F00CE2A
+:107320002A821323FE831E4EACF80F00E7A7042722
+:1073300046FC876EF8C488FF00706E253831E23F46
+:1073400074C32746FC07807307C18911FF410F27CB
+:1073500056FC0780732FC18911FF410F2756FC0788
+:1073600080F32B821323FE43377C62C47F0038F501
+:10737000248731E23F74C3E7BBC67FB085062A3954
+:1073800014FF81E24486E33F247FEBF80FCD88EFC2
+:10739000FFC67FF89F19FFE166BBEFEB38F2837EF3
+:1073A000B7F80FB6F86F17FFE1667B517C3CEE2F04
+:1073B000BF65FC87D4F86F17FF01FA498F1F13BB15
+:1073C0009F58F11F7274FDF414FF01FA1974DEF175
+:1073D000C488FFE0D1D1EDFB8AFFF045DCF9E33F43
+:1073E000FCCBC559806D0A9EFF149328B27F99B8D3
+:1073F0000BD7C6FF93E32E90B1F0AF1477417BBF5C
+:10740000DF60C2F5EA4DC1F7D7845CBC25E22F1CD2
+:107410008B197F217815F94597CBF117A60B3ECE36
+:10742000F3C9F2309DF1F386E953B278BCCC325DFA
+:10743000FC855CF9FC7A86EFC81400C7AEF2C8E39D
+:107440003822E46166C947CF217BAE1E1B3DFEC2D8
+:107450002CC18F621D5DA60BBE158BF47A7C920247
+:10746000F23CA3EC888A749DE96E55C9AFFD038D8B
+:107470007F6E897FB3055C3DBEB304FF665DC9F9CD
+:10748000A7C7FB55E49F13D2B251C43F3DDE7A3CFF
+:10749000F5FC6791FC8E889B51C0E4B80B93AD72EC
+:1074A000DC85A92E39EEC215E972DC852BDD72DC94
+:1074B000851FE4CA7117AEF2C87117AE1E2BC75DE7
+:1074C00028F6AED5C57DD8A48BFB70972EEEC3FDF4
+:1074D000BAB80FDB74711F1ED1C57DD8AD8BFBF020
+:1074E000B42EEEC37E29BFB8E6B0547F69ED1129F2
+:1074F000BFACEE0DA9FEF2E071A97C45FD07527903
+:1075000045C34752BEAAE90BA97E6FE33EBC2ADE03
+:1075100003BF26DE031F13EF81DF8C11F7E1AF3FBE
+:10752000FFE2B6C8F7F85FFEFC9BDBF03DBE41BC56
+:10753000838D15F7215C1E23EE4357FB6F1FF72148
+:1075400025F99FFF0E3FC7CECF3727C44FCAB1A73B
+:107550007CF777F8D716C9EF99E796C8EF9973ECDF
+:107560005C9FCFF3C9EF9AAF2F93DF3597D97CD9C2
+:1075700088873EEEC384786F8E1DF5A5789F1FC265
+:10758000F7A9B0363E8BEF53217D0EE33E407A10D3
+:10759000E33E407A08E33E40FA7B8CFB00E94B185F
+:1075A000F701D29731EE838A712302226E448D88CF
+:1075B0001B512BE246D489B811411137A25EC48D0C
+:1075C000681071239A44DC8810C139E13F44E949CD
+:1075D0007F0BA5A7FCC7283DED6FA5F48CFF34A554
+:1075E00067FD1D94B6F93FA7B4B7712334B9FC33D6
+:1075F000DA0D66EC9FCBB126A733EC033744CA699A
+:1076000091FDA20D28A7B1E245CC459AA6C48E17DC
+:10761000112E8F112FA2AB7DEC781169A3BFBF781B
+:1076200011FF16CFE5F51F8D1731BF5A8E67B06079
+:10763000CDF9E34594D98A56A35C6AF2F86FF1FC60
+:10764000BCAAA77811DBEC8A58AF812E6877015D60
+:1076500068BDEEE1BDFD738E8773713FD1997BD11B
+:1076600079E31CE8E52236BD795C83EBBEE738118F
+:107670003DD155ABFF66398F5FF06FF1E78F5FD07B
+:107680002D4E444FF105067D467AB2B771227A5AE3
+:10769000177AA2E7ACEF394E444F7AB5277DFAC787
+:1076A000E99CCE13E2CF1F8F231C17CEDA72901AFB
+:1076B000BBBC34B555F10EBC60B68BFC27EDBBC42A
+:1076C000BD312F73BB52F93B75B437DBF7240C6720
+:1076D000F47EDDC5BCC09F78F15DD9B57F3F9EA724
+:1076E000DFEA64DEC4248A07EF36E6E03E6CA415C8
+:1076F000FD29158D1FBDFC3B806B6B36D27DB276AC
+:10770000C0A185EC3E6F22F22D9EDD4EFB743CE362
+:10771000FAA64FE47B66DDEF37609588F39BA946B8
+:107720003BED9B3AB7F27B9E4676F17D1347D37DC6
+:107730006A167413FFC84E5D21F0ECC414EBFBAC69
+:10774000643F2E3BFC447E88F1F3CA48BF419F4210
+:10775000D94F5367730EC777952CE06D41FB7B893A
+:1077600080975224FB6F3E5C547808CFE997F84A23
+:10777000E91E425A89ECCF61E2DD386EC7C2F7E5F7
+:10778000009FD226853DA0747F475ED67CD706DC5D
+:10779000E72C0FEAED6F968B7256CEE23CB8EF5DA8
+:1077A000512F973B1CE23E879DD97B45B7D60BEF07
+:1077B0009B987C5EBA7942587F9783EEC32E3BBC80
+:1077C000D88CCCB2A4CB74B3B965BAC5E7CAF4D12E
+:1077D000D3CFE191E9A3A75FC258D9FFA5D14FBB91
+:1077E0006FA832715F34C8EF91767B87DFB48DF07C
+:1077F000D4D34F4FAF510E714FA28B5E45D654522A
+:10780000F98467861A22F9D6CF874C7B48C1FFEEF0
+:107810009F1C5C4BAD3C0E15F5563A07CD9425BC2C
+:107820005D3CCE078C2BCB3C341F70478FFEDD7840
+:10783000F66721F7EFB26F20BDA9F8B9E38BA0740A
+:107840002BCADB08FEFB0BE4AFD27E3781795CB834
+:107850008F6AF05BDD4B543C1764EE2503F13CD09E
+:1078600045E99DE2DD6FFB5046FBFE86D027A978F7
+:107870008E76675EC74CF43F542D6545B87EFDC8D3
+:10788000C9DF5D6C12E90827F7CF6C2E3230EF6844
+:10789000FC1D1E635041BFABCB7BF872B4479B4DC0
+:1078A0006E7A47ECEA78F97A2A1F45EFA3330CB5D4
+:1078B00023111FA84FEF6BDB9BDF752E8ED0C36D9E
+:1078C0004D770FC1FBC5F71BA2BFEB2D7568EFDB32
+:1078D000F8FD8E115D71064A1D63281EC19DD9D029
+:1078E0004F657127F15193CB0982FECF954E27FC4E
+:1078F0009E6C56DCE8AF9B66BCE107C300BF7147D6
+:1079000055AEBFC4BDEED1A2FED3CC938EF88EBBD4
+:107910009429387FC6BDC13C0124717529DDA7FBC0
+:107920009D73DA21E4D7946690279C0F67ED1EBC07
+:107930002A3FA645BE2F9738C57700EF175E728C99
+:10794000913EBBE498AABF1F63C4FDFEB856F9FB85
+:1079500004DDFE739D26774E968A72B7E52B23E1F0
+:10796000D5DEC13CEB006EFB92BE746EDBFE0923DC
+:107970003BB1FD2B6361B4FB25773BB8DFEB7E3376
+:1079800023FD7D7FA99DDE393C5B5A7E01DA179F7E
+:10799000FDC47741343F65849D96C0DF9F7B13D83B
+:1079A0005894C35B154EEFDA8CA228EB9626779A93
+:1079B0001C6AF297511AE78B765F33D9C9EDA34958
+:1079C000A5B98A19E5679FC290AE6DEB00AFF3AC25
+:1079D000DB01B62E13F1A96AFA98EE61599B95A8BE
+:1079E000BFCBF384C3C9EF03AE0BACC5FB1737C3E2
+:1079F00024423D9561AECD8A063FC0B6905DFA80C7
+:107A0000C3CDDF0D58451C21B53603EF23B4354DEA
+:107A1000BE7203E0F900CC07E4EFFD260FE11DA8DC
+:107A2000608CEE930A7F5DBF996CDBE608FB77AF55
+:107A3000A3E030CAED6107B71BFBF83C0AE2EDF9A1
+:107A4000FB5F9D08BFFD730BF1AFAFB037B5762775
+:107A50001D9C3E254EEF016CCFCA9249F9787C4EB1
+:107A6000F7923EE837077A47B1AFB4753DC9C7E82A
+:107A70007C22C96E089272F27ADD2EE9BE7780E62A
+:107A80008D360F584861F85E5FD36F4AB31272802B
+:107A9000DC8FB6DA4378FF2CA90CC69D8CF13CAC88
+:107AA0001C5E8B7A56F66B813CE6A371CFE8BD3F36
+:107AB0003A5211BEA6F7347D796B22D747B7DEA5BF
+:107AC000523CD0AD6AAB0DFDA9595EF7240C4D9325
+:107AD000A4BAE95E4AFF323E0FE3737E9918B603FB
+:107AE00060928FFCDAB820DA7BA60C94A714A497D6
+:107AF000EF4307A4C30F753C8BE682C7C6FAF0FBC1
+:107B000053424F08BB669A58EFC6BD67E0EF284363
+:107B100097B3C8F7457A3D0172FF27FCFD9EFBDF56
+:107B200053294E68583F944EA3F58919871E403952
+:107B30009BF022E3C751423FB8E01FD2E792977C07
+:107B4000EB118DEFAA17F4FC66216B388F3FCD3611
+:107B5000EA10CCB7C875D629D67BA1476E2A1EB8C5
+:107B60001EE797264717DCE231FA22E8A86F1FF6D6
+:107B7000532AD6F077770EEA91978C783FACBD0008
+:107B8000F80D747912E70BD03BF193E095C8F72D0F
+:107B9000CD57D850BE6F0D4D72CD803689D622623A
+:107BA0005E22F3923F270FA8837122D69350C07EA6
+:107BB0005D2DCA72A6E03DAE42C9DFA3FD2E1E0CAC
+:107BC00094F812E603C871E43D564D3EF5F2A8C99B
+:107BD000EF7ADC60E1F91D7ACC21352A0DC4200B47
+:107BE000DBEA423DABD997EBC3F65C22ED33560B93
+:107BF000BB68BD7D9A95D4C0FE645ACF57E3FA04A2
+:107C0000E35F9DC2681E68E3D0CB63D5E706168CA0
+:107C1000D81F54A91D748FAFEA73330BF6C171FBE3
+:107C200026E1B835BA8C1474D1D321DB29F69B82B6
+:107C30001EB1F1CC77E1FDD944AB976D243C27D13F
+:107C40003DE786509E15D7DBDB7478F602BF39D14D
+:107C5000F053ED31F013F1DB2630DFEF5A415EF3E4
+:107C60006FAACBE0EB057B353D827FFA7933B6A96D
+:107C7000FA803962BE687E5DFD3C19D1CCAE41BA56
+:107C80008F0BA90CCF5F7B9A2F9F88F156C5737A13
+:107C9000B5CFE9188CF2B943F5553BC9BE683560DC
+:107CA000DCDFF6A719CD67CFFE934E8A6FD4D2BB27
+:107CB000FBE99A1DA5D94FFA7A9AFDA4E95DED7EFC
+:107CC000F876A7CF8FFD2B4D209F30FEF52EBE2FCF
+:107CD000DAEBF0ADC3EFF130063C4A62B9A12CFEFD
+:107CE000FE5596FF58F21EAF93E706A013FD4E1601
+:107CF000E8FF414A773CB4FEA73813F9790BCC660C
+:107D0000D443FDF219EFAC92D1FDC97EC3990FD7D0
+:107D1000A77E79FCDE5F50ACDBDB84BED5D2BD8EA6
+:107D2000A2FB117F93CA0296BCEF8E37A28AF7B1ED
+:107D3000B73BBDF7A1FC590BBD348E4C17F3A0FD2A
+:107D400099A93628F86E3269A55BE1F7B059D73B9F
+:107D500026809739C35D80729289FB68ACDF1C3D39
+:107D60008ED6134E9364677A58384ED513D82FD8D1
+:107D70009907CD80779F195ADC2BEDDCC6A3209D97
+:107D8000DA1C7308E9B64F156E8F27727AE9F7038C
+:107D90004878C44F15F9DBCC4CB525B1AEDFE134E2
+:107DA00058C98E8F679E06D44B2F3BB3C5B9A8A781
+:107DB00006F3FFAE7658138776C9F19D13677954A1
+:107DC000A8E2BCB47338EE99409E0F23BE6D133BFE
+:107DD00007DF4AC4E818C0E5C66B94E2E268F46FB6
+:107DE0003249F4B7E13E3B520F3ACCB48F6C53E2C8
+:107DF0003C38CFDA962B1C4FC52AE206A9F2FE5F6B
+:107E0000E8234DBF763AB308FF7816A07D00B37A19
+:107E1000AC748F5DE08F7115C9AFB3373EB81DCF1D
+:107E2000A3747114F57116272FB6D3BD8B2D7B6DFE
+:107E3000B42FED2CE2E7F39DCD16D2BFB1E6691A5F
+:107E40002A83F3C40B04BA7520DDD24CD589A8F778
+:107E5000D2E6F3F9AFA7473B0E14F73B7F3005A3FB
+:107E6000BD57D7D2F4F4BEC56897A567A453AA7DC1
+:107E7000AFB3AB51EF611B1314294EDF10E851EC87
+:107E8000738C09F0FD9CEF8FAF7959D7BDF6BA38E6
+:107E90004EBF4EDFF8848751AE40E0E8F704B4737C
+:107EA0004DB19FD7E22769FD6CF15B8B31E467DD53
+:107EB000A2E9365C075298F7CA793829B798D84EA4
+:107EC0006A972BDD77BDD73FB218DF276726F07B97
+:107ED000B49F6C994AEF9953D93ADB60A0436991FA
+:107EE000C183FE80738BDE741A407E1665B6E4A3F0
+:107EF0009C26987C990963C87545FB8D6525E660CD
+:107F000008E8955C070A81E818B892E8B8D010D55F
+:107F10003F9C9DC0F79D6F89F5243D7D40F19251B6
+:107F200091F97E44574D8E60FE642C19DD150F13B8
+:107F3000F87951429479D06E624DF85E42D347C9C8
+:107F400042CC347DA8C97132CE0FB4E38A403F4998
+:107F5000E77D5035B5EBF70C95E617BE403BD6797B
+:107F6000E924D237306F6B48CE73B9FEB4A13E8B93
+:107F7000F05BB5EF7DBD3FBE637AFB671F3BF05DF5
+:107F8000CB5FD40E07EAAFD3B7FCC98171C0DEBEA8
+:107F900085EF936FD4D9FF5709F90826144D41BADC
+:107FA0002EF0FF3D3FD25E636BB8FF7979507EBF04
+:107FB0008AF7BF23FD80150DFAFB00011EA74CFCBC
+:107FC0003EA79E0FEB041F96EFDA66CE7463FFBEEA
+:107FD00039D8FF69B1BF39DDE8A0F7141A3E8B76B6
+:107FE0008D34A3CDFF97668B78A7D762E27AD93B11
+:107FF00003DFE7F804DDF4781EDC174FF096DEC3EC
+:10800000DFAF2E84BED6805EF435F3384AFA712C89
+:108010007DDB3D0DFDE84B3729B48FC3FAB7C03A7D
+:10802000E15BB391DEF1E8C7B93020FB73F4F11ADC
+:10803000B5FDC032C1FF25F86BBC3951E23836F3CB
+:10804000F774CB74F645E7A19C781CFF9A0461672E
+:10805000E7B34B306EE79E43D909D1E26168E95935
+:1080600071DE8FF7FA313DED67944E4970F3785D1C
+:10807000CD476E46B9AA6CDA4DF111F705DFEB3347
+:108080001EAA14347F6144A12A10F6D87C618FEDBA
+:10809000615C6EC08EDE8CF27FF9E73A3B5A8CF35E
+:1080A000064DEE0F2591DCDC80E31A8EDFD54FA262
+:1080B0008DEBEE04F9FD576FC7A58D471B9F565EEC
+:1080C00021DE9FEBDB69723E45C8DD921DC51BFAC0
+:1080D0000229D6EF7D7F8088234771B63439D2CB11
+:1080E000C932C1B7B03C34DF41E3D2F806F29E2E6C
+:1080F000DE25A5A33FA327B9D0F3BFCDD43A00E72F
+:10810000AB9EFF6D31CE7DB627F0738D256EEF34BB
+:10811000F4AF8079B8C115613F9C566B0FFE14E730
+:10812000D10E2EC791EB22194B2F9A689D5DE570F9
+:10813000A725DA05DFC6E1FB454B00EB69FD9CF2A4
+:10814000D7CC1A48E78DB5B3060EA4771B946AE521
+:10815000A5F77FEC44FBB43D97917FA1CD21E37B54
+:1081600004179B319872FAAF545BBE7E0B75D08EAC
+:10817000168ADF7AEA2BE19FF8CA52186D9C6713C2
+:10818000B81DA8DD3FB951CCA31B9BF97BBB455B58
+:108190008BCDE4075823DFD77849714DCB84A6BE39
+:1081A000869166E4B39E1F4B3D57D03BF06E7C61D9
+:1081B000B7135F97EADFB5897B4C0B847CCC74B92D
+:1081C000859DE6A377C44BEA8C64DF2F7357D3FEFB
+:1081D00066851AFD3DD61897E1BCE3D18F6361A394
+:1081E000427A4F8FFFB21D6B37F465387E3EBEEE8C
+:1081F000E308F5233D23C6C95A2FE7EF32C5BAFD80
+:108200005FB8D1C6A4008000000000001F8B0800EA
+:1082100000000000000BB57C0D7854D5B5E83E7326
+:10822000CEFC24334926FF21413C21111212E29059
+:1082300084000171F24BC4080301826075405184CF
+:1082400090207A5BEFABB79990682DFA7AA358CB60
+:108250006DEDFD062BAD0A4880A08126E9041403CC
+:10826000040D820A96D68014B1053280B5587D8FF0
+:10827000B7D6DAFB64664E92426F5F87D69D7DCE9D
+:108280003EFBACBDFED7DA6B9F65ECD94B720E633B
+:108290000FB7CB8CE53356FBACEC65A98C2D63CACC
+:1082A000E9BE0C46BF6BA9F85F67E59204C6EEC550
+:1082B0003F5568DB57553278AE5CAE9985CFF56F88
+:1082C00090995982EB1EEF53C971D036498E4618EA
+:1082D000C71E379EEEB33066817FD746D33C8C25D0
+:1082E000E0FCFCD723B1A75260FEB38AFFBD08783B
+:1082F000EE2CC0E181799678F873F47EF8FF32C7EE
+:108300008C2F2478DFFDEDF229730E5E5D6D32C097
+:10831000F8A52F496C1D8CBFFF69DD78B12EFD3AA1
+:108320001EDAF0A3B9E91981710F7B9F0BE9C3DA5B
+:108330005456C0D87D023EF6EA7F05EE73F84DAE86
+:1083400008C632ED117167B3A05BC0265D4B63AC0C
+:10835000CE1A99C3A2A03533C2233B64F46E02B88F
+:10836000D644C08201CE355BA3BD1EC4E3EA68C615
+:1083700046C0B8F68D26B70DE6C4DFED8C9DAB6F19
+:108380009E9B9E0EEBAF7F7A6EBAC2D82CBB9DB17E
+:1083900089408FB6E7685CB7E29A6487FE2A4BDFB4
+:1083A0008FEF5683F03899D363995C696286C07CFD
+:1083B000FA7659B3F1CBBEA0751621FC56F86312BC
+:1083C000C02FFF3DF8D5C4685B006EFDBC7FAADFFF
+:1083D0001002F74A85395B6C81F568E326DA0DB443
+:1083E0001EFDF37A7A30E6A5717ABAAC443A04D12C
+:1083F00017E15400AF3D1D56EF5A89F888E0F67436
+:108400008411DC1793D6CD3D93C7D8617C00E0AED4
+:108410001DF132F55F515C6E7B3C5EF48F728DC74F
+:108420006762199B323CDE6046C6607C2ECE0FE34D
+:10843000768539F3988CD75DB1C807D31BFAAA2C7F
+:1084400040AA3AFBA40A05DE33FDB9BEAA30E83FD4
+:10845000629FCCFB9BFA8E5A1C8C35B02915A5F077
+:10846000FC63700FE7BB5E9B6F762D66C05735804F
+:10847000534B0CB4C7C6BC8DF256D35B5921454251
+:10848000CB984FCA057E7046FAAC39D4678530AEBA
+:1084900033CAFD1FB8BE55579B2EC938EE98C2E5AA
+:1084A000A53B8EF0A000EC61F05C53B853B503BE61
+:1084B0009A622C8EC654BAEE098BC1BE535583AE58
+:1084C0006BF4C0E7108E2603734643DB75604C5493
+:1084D0005FF6F078EBAA57AB14A0FFBEFA0C6AF572
+:1084E000F78B4CF674073C5F6460EE16DBE0FBAF85
+:1084F00022BF109DD414A4736DB789E41C7F12F0C1
+:10850000FD2AA1876A81405100CFAA63CC171E893A
+:10851000E3CABF50B06D95D8E910BE6281BE3C3C45
+:10852000DC37DAD6E27C4A309F703C152BA9554ADD
+:10853000D07B4B6D99217D39D19081EB6172B8630D
+:1085400013E0574E31ACDE01EB976F8616F0A1D8E1
+:108550001DF212689B4BA6CB4BA16D34B2852DD872
+:108560001AD8F2603C750879D2DA4B76D76F90EE64
+:1085700017DEEF2DB0929E1A6927F916EB6D941C49
+:108580003ED4439E2EE6D804D79A6417E37CDCC21F
+:10859000908F7F2FE671980D3B55E0D7F7EC0F12C7
+:1085A000FF3AA20C8FA642FFA3E615150AF0AF23EF
+:1085B000C570251578F478F34ADECF325C190DFDCD
+:1085C0004F9A6B787F2A4C99CCD8C9E655159E6C8A
+:1085D0009C97EB31B6C59985EF510C12C9A9B2D75A
+:1085E000E46D843F9B22393F3519812F6370BC4A6B
+:1085F000E39F6A28DE6C05FE578A9DEA6A1BC73531
+:10860000F2C3FFB4D5F0285B0DAB118FD822BECFDB
+:1086100088756B7460ADCEAC39A8175A9C5973231A
+:1086200010AFEECF11AF793DBDD3510FB77EF049FA
+:10863000813B9BD30BE7C9EB612C12D673E1AD9B59
+:1086400036CA52803E97EC45E7515F4BA0A61F8784
+:108650007549AA9DDD0372D7E864AA09D695C85E5C
+:10866000B2A3FD30207D4005B532AE5F3AA35C5F1A
+:10867000E2736CA48FEC4CB5DDF515BE5FD3CFACC7
+:108680003766483DACD757A69CC765067C1093D289
+:10869000767C29EAF3DF9A1DB7A8088F933D0E7008
+:1086A0006C333085C5107B642870DFCAC21DEB5067
+:1086B000DE1D2CC903F2856823E0E01707F6D028F9
+:1086C00064485B073C5FCAA09D8470DD4AEB9291D1
+:1086D0009F2630978C7AAB8079ADD8F677BC95849D
+:1086E000F87A3E8CDDE782D6F22A737A83F4467EEE
+:1086F000B444F89F1563A436DCD83217F934FC1261
+:10870000B3A31FD0FF0B9382F38360DC89D71DFBDB
+:108710000D0CE1FCB5D16B8F82BE3F53515F66817A
+:10872000F9FA059DB5799F37A999D1D0AF8A9108FB
+:108730002FBF2EE2F6D8FF85C9FB722AE2C7B2DA54
+:108740001B2457E3A3F9B8BAB8E2B1D1F07C4B4788
+:1087500038C3F74FEA0C3720FE376FC90D433ED8B8
+:1087600086B881F5C798ED8FE07C315700DE54BAAA
+:10877000EE24BC2AEA8428C06BE14C9BBA0EF0FEC2
+:10878000EBB09699C8F7FEAD06F632BC629BC931D4
+:1087900007FBDB2EAB76D4B3BF4E6D09A7F56C3566
+:1087A000D07AB685FBC7AD01B8D7652815089F629A
+:1087B000650AEA5FC550AC3E02D7A74573FDA8E93C
+:1087C000E39A6895FACF4BF0FE5C1C57447253262F
+:1087D000DB48DEFAFDCC6B86F7C4CFEB95911EE14A
+:1087E00073809590DF159FCC703E17121A5A9BD15B
+:1087F000AB929E75DA9600DDA70B3D3BFD644D25DF
+:108800008BC48EE3D854986F9FCDC8705DB7B13ECE
+:10881000D902FDDBAE32870FF9E7AA427E981DFE32
+:1088200005FB7B65629E5F494C898271455FAA0AA0
+:10883000F257110BF5DBCA36947F81F6ADC4A2BBAB
+:108840008EFE5C24B64AE03ACCB3285AF861A3D82D
+:10885000A86BA4CF60D6046147555C7FF67FE1BA70
+:10886000FA2B4C0E5CFF769BF3E3A9A8077B8D6C7B
+:10887000131B5E8E7E550F1A7D0C08C7D570E68DD2
+:10888000253EB421FDC76D68F684C17AC7A5F3F90A
+:1088900091DF506F8CFD455C2CEAED8868AE4FB4DB
+:1088A00056E32FE4237B14E723FBAD01F9FB5E7451
+:1088B0002A8DD3E409F90BE7D963F42E760D6117FD
+:1088C000812FBF877CB9DDC62A90CF9F1961598857
+:1088D000F2A4BD67B7E07B7DFB54C39A2E23AEFBA9
+:1088E0002FA0FF01EED2E4ABA660FBDD15C7E12DA2
+:1088F00093BF25BFFA62BB44FE7C423BD7D7C17C05
+:10890000316268BE7801F17A3DBED0C7011A5FECD2
+:10891000B81E5F74FF637CF18B68E1DF0ECB17DF5D
+:1089200046E2FA1FEB2849647FC78F69137C30DC6D
+:10893000FD2956AED7F4D7DB053E779B9AEFCC41A5
+:10894000B9BFCBE040B906AAA7CC05FBB23B9C3F20
+:10895000C794D569D8DFAE703DB2BDDD4C7A64BB3B
+:10896000CDED267B9D6461E82730C5DDF77DD47FA2
+:10897000C916755D10DF3E2EF4408BD137E573F4D8
+:108980007F0F70FA4EBE2B5736C1B8110F70B9CE9B
+:108990003F67DA28C33CD53145BE6818DF17CDEDF7
+:1089A00062DD1918057C597BC644FAEDADCE23E58E
+:1089B0004E1BF9374EE4AF497B8E941767E378CEB0
+:1089C00047DDA2D5FA53704D3164768E25017E5D68
+:1089D000C24E4C615C0FB9903F72027DE634523C4E
+:1089E000A6F1413563596827E6F639CA908DAA2A5F
+:1089F00042E95BED9B4971DFFCE3CEB20858D77CBE
+:108A000097EEBEA07FB58EFEE007FF01E564D5E6D8
+:108A1000DE4E1BF2ADCAED698B697516F77B56A762
+:108A2000A1FFAFC911FD004F2DBFCF78795D901D1B
+:108A30005763F83A9F752874DFD367F2DE0297FE1A
+:108A400037E3CFB5087BF3AD90E3DCC7DE588CFC91
+:108A50009BB7DCB90FF1BF284EA6EBFFC97C96345B
+:108A6000A48F4321FFABC5A8967C2E05C631C595C2
+:108A70006183FB7BE2C3F3F0FDD531EE6B4827A6A3
+:108A8000F8BBF1B94985B9792857B6094DB1687F66
+:108A900034B801AE8A4DB6001C1A5CE785FEA98E7B
+:108AA00059720DF180CFA15E693B75D682CF6B7490
+:108AB0006FE9B8C4E91D447FA47780FED27DD8D782
+:108AC000F06011ADD6FFE7E9EF1B89F41896FE18A8
+:108AD000F747FE8FE83F2A6608FA833F958ED73521
+:108AE0007FAAC5047E7576A0AFD1BDDA5E44E31CD3
+:108AF000265819FA4F9D1057A21CBAA3D1B9613B51
+:108B0000EDFC5DFDBF3F3B0A5C4036292686CB93DA
+:108B1000C93F06FD8D093E89FCBE0920F0F7909FF4
+:108B20003592F49D43E0879D95A4B319DC05BF966B
+:108B300082FE9F2F16E56082B9D287FCBEC33A3D04
+:108B400005FDB75CEBB434E4A737331E3B8426E75E
+:108B5000CDE4E53B5F51037E8EA6D7F68969B5F774
+:108B600097C770FADF0E6A16FD3D740D83E1D0F4ED
+:108B7000379205E1907CD5866B56D2C7ED7D80AFEC
+:108B8000DB110EC06B97C45A517F17199C7125E8F1
+:108B90008FC5FB14EED77D3D4A05BEA96C7FF73823
+:108BA000C25B69B1F930DFC21CC6F37D41F912BD69
+:108BB0009FABF9259ADFAFF92D5A7C89FE0DDECFE8
+:108BC000C7EB00BFDD0C00A2FDF159BC0DF0FEE7C4
+:108BD0002FAB994E21AF0AACA352AC6336EB25B84C
+:108BE000D8B7D7AE4D03FACC12F8A8EC86B8300748
+:108BF000EF337617E0E12E85C78B7739203E0CE204
+:108C0000A3D99343FBF89B9E1098E77AE3F5FA7F8C
+:108C1000AAC817FCB371A6D676831D3A0D0C70B0A6
+:108C20009EC73485A3658F82F1803BD380FC582793
+:108C3000EC1A84C943DB2321AF8586BE1C07E0B74D
+:108C40006BCF3764FFF6EEF9E623F4E7A67CA1309C
+:108C5000333C5FF8457E14EA07E60A9DB7EE8FAD18
+:108C600056C6AF13FFD48AB5EFAFC78C18C267A141
+:108C7000F637E79F5F8FF37D7946E1BC2DDE5F6EAF
+:108C800072A7DB6DD8F2787FBFC4FD1DEDFE7E2399
+:108C9000C00DD737C568717FAF42F919F89983E8DD
+:108CA0007C17C6FBB901BADE75AEE20B2567307DD5
+:108CB000F0F7FF23DED7E2FCB744FCC0F69D30A9F5
+:108CC00000D78CD64714F4A36724C9CC19F4DE3B33
+:108CD000542B7306C5FB6FC4E8FC907DAFAD9F05B8
+:108CE00076A4AE477684A1BCB66F3F9483FD5ED96F
+:108CF000611D828FF4F89DD1FE8882FC9F10CBE528
+:108D0000E67AEF2F1C077C722BD29D911F77B14022
+:108D10002239D2D377EF9E9FC7F6650F8FEFE1E838
+:108D2000AFA7C36FCE1747215EAE470F3DDF76C2B8
+:108D30003A3DB03E1FACD303FED6DE7A3BF5DFAE44
+:108D40004FA2BEC6AF751DBF8C457F4DE3D3B25851
+:108D5000CE375376AF8F65B600BD347C5D1474ABEF
+:108D6000668EF9B3E0CF5D922382F48487F52615F1
+:108D700004EC55F5B172F233347B552D671B51FF6E
+:108D80006AF60AD3C2A8CFF4F6697E7A9111D5AA01
+:108D9000DE2EC1028DC8BFD50B43AF57F4342B1163
+:108DA000D433109D2449E043F8D51A3C1F3217C133
+:108DB000ABA7A7069F1E2ECD9FAE1674837596E1B6
+:108DC000D2E7AA45B48E417655ACF746EDA93936BF
+:108DD00034CEBA72AEF4FD9C21F87538BED5DFD71B
+:108DE000F44039BE20975A0FFA1109B10944AFF285
+:108DF000AB26E6047BC14686B1CF82F3EFAF649227
+:108E0000BD7B54D8DFE1F8A6F6AA81B96303FC6301
+:108E10006C7BCE8AFCB35B69B662DEF136DB9CC646
+:108E200028C053E91F8BE7A15F57D76760989A2A3C
+:108E30006BBFB40FE3F6BAE3CC81FAB0B8BDAB04B4
+:108E4000F9ED6DA557A638FA4BC69E0BF20FDBDA8B
+:108E50001BADE83FB5C5C914A7EF8FE6FCA8DD6FD1
+:108E600089E5FCD776E6F22CE710F73F13F74B4F76
+:108E7000E51AD148F6C74750BEA1FC6903ADBF54FF
+:108E8000B25755A2FF718791FC7A885BFEF07DCCCA
+:108E900037B599B763AABEACED878FD881102DFF87
+:108EA000E7B30633E60FE6488E97615CB9EAEFC296
+:108EB0007EF9BC54DA8799F47F65F25FFD774B94B5
+:108EC000F7280776C17EF93DA95ECC3FEC9178DFAB
+:108ED000D3C1F3FECCEE899D05EFF9A03276C23AFC
+:108EE000E229AD7F4BEE3A261838289E7A6C17DFC0
+:108EF0003F7AAC4CA2FDA3327B0AF304F155F9D3BF
+:108F000040CF3CE0C7F6C462E4DFAA0A997983F84F
+:108F10007ABECBCABC41E3F7877178FC92D98BF952
+:108F2000124D5E670AFEAE5E181B327E0EE37EE2D5
+:108F300042D66C44F9AE13F0D415013CF0FC4C1150
+:108F4000A7DEED4E09796F256641606856DC68B290
+:108F50008FB3BFEC23B33A473E796C31BC87657061
+:108F6000F9D0E4AC4CAE69223E48921C181FCF9752
+:108F7000C0AB9451DF85CAD1ECC9A1FD394EBD7E8D
+:108F8000089577BD1ED7E47C7E876CC4387A7E91C5
+:108F9000E46043E803BD3FADD703930C8E7730AE5A
+:108FA0009E7BD549FC35480F9CACF887F4C05B200C
+:108FB0005B93415E7FA4E9839BD84DA80FCAE42D43
+:108FC000EB913FFAC1AE9987E00FCD2E68F176396B
+:108FD000C827F2033BCFF725CAAE829CC606E2ED56
+:108FE00001FD007E8363087FE657B16921FB4903D9
+:108FF000FA22C86F3016FCF37E4319F88BA65C8406
+:109000006F24F3E4919EA2FC1EB43ECAB3255DA278
+:109010003C4A1DC4F114CFB35F125CA8D7A49800DA
+:10902000DFEBFD092D4F3B42E409F4FC3090B79B88
+:1090300067F4229F69FC506EE772513E4FA6FCB95F
+:109040009E3FB4F75D8F2F7C12F085F477F842C80D
+:10905000D38DF2C5218D1FD259FA8DF083C6071A20
+:109060005FE8EDC5415DDE65387B71F23AF6E29D61
+:109070000C23E965BD9DD0ECC28138AE7FC7C7F235
+:109080007D8A9999F36DE8578C407D80FE9EB037BC
+:109090000379A30D9C0FDEE95BAA486837500FA443
+:1090A00006E15DE44D35BEAB7D9A51FEB052E89FBE
+:1090B0008B1D3C9F56572A7B2DF06749FB73EB793C
+:1090C000DF48F9B622A54BB1C0BCB31D9203F335FE
+:1090D0004E917F9B75D5E455293F3FF47E7A95E00C
+:1090E0001B8C7370FC6CA7E4851074901EAABACA1E
+:1090F000EDBE5E1F5589FDF22ADD7EB9294ED0F501
+:109100006676F3BFD2EEC7C72570B919868EDAF33B
+:109110001A1D35FA4DC0B1283FFBBE36A911DC3F00
+:1091200046FACDB8AAD03CA3E242FD962FCFE7FE87
+:1091300027C574627C5DFB25937BFCF0F05FCF2F2D
+:10914000BD59F3C3855FAEBD7726C8780A3A863A23
+:10915000FBA1BDE7BAF6423CAFA7D3E4B8D0784252
+:10916000A387A64707E15BE8D9E1E8753D3DABE998
+:10917000B37FB59ED5E6D7EC80F65EBDFE1D2E3ED4
+:10918000D3F4E9531B0D9417B94DC4C1B7893CEB17
+:109190008342CE970B7DDBFF178B01FDAC6D9DDC11
+:1091A0001F7198ED87D06F08E4F3385D9F8C601EC7
+:1091B000DC2F674AAF85F62F8B81A4B87F99CCF757
+:1091C0002FB7283E17E96987C21A405EFE2AF216B9
+:1091D0004FEEF52C463DFDE4E93106DA47577CBDFC
+:1091E00018174FCA55683F28DAAC52BEF76287D9C4
+:1091F0008ECFF5EFFE5E9711E7F90B7360A8F67658
+:109200008779603F06F54299DC23635EBEDF0FBEBF
+:10921000388C9FB6D05782F1CE6DACB711E3EA42DD
+:10922000A4E310F47B55675FF479FB920EEE27956B
+:1092300044F0BA9FE980467CEFF43613F985D7CB2A
+:10924000DB177DC9C85F1A94AF6FE37A0606119FDA
+:10925000DC68DEBE107D3DE0E39FE8F40E1B267F58
+:10926000BFCDC4F773FC478C0CFD5E762E6EC8BC78
+:10927000CBF5F2F8BB3BC39D6A24EEBB71FF7C7754
+:1092800067B253CD197E7C4E9FBF18F395DBB6CCE9
+:1092900055284E14F9CF41FB223AFCED9058931516
+:1092A000F369ED8E528C3F86DBE728F63B69DE1BC7
+:1092B000C51B63CD9CCEA27EE9762163DBCE863BC7
+:1092C00091BFB79D4D76223CBB057F6AFCBEFBCCAF
+:1092D000E570DACF343955DC07F6475B1C2F13BF36
+:1092E000723E6F1931C68BFBADDB853C6C0BF71FF3
+:1092F000CC8A0BDECFE0FB179DF59EAA33E9B4DFE5
+:109300002D61BE51DB27F680BC505D4E0C237E32B2
+:10931000B21686EF6D74B29F633B7D9A1A85F8BED4
+:109320001CA7ED47AA519467F8F64A816BFC60BC14
+:10933000EFA877513D496BFDC22A05607CB3DE4D35
+:109340006D5BFD726AF7D4AFA6FB6B0F453E8E7660
+:10935000BFCEB9A04A09D21B9FC5F3FC526ED6E915
+:1093600012E473F60D6318EF4C7FA24F463D71FB7C
+:1093700055584748DD887219F14CF9CBB4403F5538
+:109380005A12867C79FB55E8078D97E2A3391D9A1E
+:1093900094A65B0A485A881FC2E29D17E3E0FA0FC1
+:1093A000ED2E7F5C3CF241F5BE0B8CFA97F1FA0E84
+:1093B000E96EF9028CCBF31551DE380FF3C6B934E0
+:1093C000ED62C4DFC42E13ED7B6BF9DB5C31AFF3D0
+:1093D000ABD03C729EC8DBBEC9FA289F9C6F81C08F
+:1093E000CA807071FA39A5F94912E6FBE24D0EAC5C
+:1093F000579898E6CAC37C6B573CA3FC695757C281
+:109400004815F0E054785ED7A9E575D9DFCFEB7643
+:109410007F1AE9217D057E0AEAA7EEA3910E1FEDD2
+:10942000FF59C8FFDB810F627D4338AF1760F3E659
+:10943000511EFD760B5F07D89FF878CAFBF9F61D21
+:1094400086E77E7B99F17DC4DE93B43F5D62C84CB4
+:10945000EC0338F74963A3B07DF1D3C86C6A8F463B
+:109460009E47FC741AAC2ABEF7C37A56857567CE40
+:10947000F76DB49F31FD7D9B82EDE1FA3EAA477BFB
+:10948000BFFE1CB547EAFDD41EADBF4AED3B701DC3
+:10949000F9E7103C8F6DEEE2087A6EC7A20813C29E
+:1094A000DB19C9B668EFC17A335FB8AF1593F9EF2E
+:1094B000C57FBECE7213D83BB37BBC3481B113F1F0
+:1094C0009FCF54A07F68C6A87FFF0BDCFFDD4F2E27
+:1094D000ACB3005CF38EDA5A7BA0FFE94F2EAEB33B
+:1094E000A19E3D140ECA0EF546FF41907496873634
+:1094F0003D9971053B19FAB1A2EFE99F590A245F22
+:1095000050D297C580B5A6FCC43FD302785C607585
+:10951000FF1BF64D9E976696DE847DE6C17A2EBFD0
+:1095200064A4F89E8D94E2B07E6599DD7D2C3EC8E2
+:109530007E3BA53FD2FE51815362D1714457DACFB1
+:1095400062F653B1C1F2B6CC5E760CE971473CDFEE
+:10955000BF9A384D7206D749E8C74D3CA396229D65
+:109560000ACE9537613BBB229AFAAE85939A509EFC
+:109570004B6DC33D5F42CF2F8837127F162B524869
+:109580007D887E5C1E3013FAC7FE03E1941798783D
+:10959000CCDD8875A36549A9B9B2D0798CFAD11B05
+:1095A000711F6D62E587A5B1283F36C981E6A180AC
+:1095B000F535C5C661FD231644E1BA9E2BC1FA9D5F
+:1095C00089AAE440B41539BB5AF1F9224784A308AB
+:1095D000FDF1636A299A9CA3CA84C3F9306E46BA26
+:1095E000ECB0C044477D774CBD00FDA28C28CAE397
+:1095F0001629ABAF1CA67E84A341C5756CFC792DE2
+:10960000CD63267BBE6356C97F20FF14BBA228E72B
+:10961000576A3B3537B82E0CD64D7017D9656F9801
+:1096200084FCFD83523BF4778C9218CACF515FE6DD
+:109630009FE97E77B81A0680EE30D94B71BE1D26A1
+:10964000C9BE96FAAE121CEF196354314F541EF77F
+:1096500045C8FC334AA5296710FEECA80978AD621D
+:10966000E4A590FB3D8BAC64272ADFCF267FA8675B
+:10967000510AD98BCAF7A71563DB63E07E7AE5FB55
+:10968000951574DFC0E3DFCAC5DF718A3EC5BB959F
+:109690008B5751BF4B4AFC777CDF95ECA85CCCA381
+:1096A000CD4CFF7AAE12ECFFADCE24F9CF1579BCCC
+:1096B0002243E6FA6900FFA307F83E4465B6145258
+:1096C00037372BFF54483DA86BDA1721FDB9A59712
+:1096D00042EA43E7557E1DD25F304FAA0A1E5F7AE9
+:1096E000209FEC6BBEA85FD2F24B458285DEA9CFEE
+:1096F000A82A05B93C00ED03A01F8A7A45DE55E192
+:10970000717506FC433D586AD3E577994AFBD91534
+:10971000DD7CDFBA3CCE783AD83E54C84F707F41EA
+:10972000B7FEDC0346B293B9D132E5AB34F82A4632
+:10973000863EAFF95F1502CE1D0677530CE5C79C38
+:10974000BDE87F68F06BEFD7E0AE90EF29A5EDBFE5
+:10975000EBC0AF87170025FF4D0FC78178118780B9
+:10976000BF41FE5937AF4B835FDC50765BF3CF2BA5
+:10977000414F4507EB299B1487F576C3E9296DDE38
+:10978000E1FC306DDE6576173DEFDCFAD9D1423968
+:10979000A89F7A2A3626B8FFDA67EB43EEC79FAA5E
+:1097A0008A0EEE6FFAAC0AEF4F57D4461BF0E34136
+:1097B00026393CC89F3DAA82FBCF25C79C4DD89631
+:1097C0009D746399299B71C6D384EDD4F3DE1E3357
+:1097D000ACEB8E0C59C5B85DF33FF4F09A13781CCE
+:1097E00072F0AA6AC5FDD31D1ED58AFEFB8E2754D2
+:1097F0002BFA1F3B9CAC02E331679A6135FAF3CE3A
+:109800002C5E677855E8E16FE2F9F35A7B5A717F75
+:10981000837A11EBC2D127A8FDDA4F75E007D1AFEB
+:10982000CA1EEC571D54BC367CDFC127BCB6E07D98
+:10983000C21BF5ABFE8C363A1EF96C4E887C9658EE
+:10984000EEAE0A96EF32FB9290FB9FC6A904FF8C06
+:10985000A48743C6DDA13E12D2077F3103FD9146A6
+:1098600013A33A598F81D7C9EAF1F8A8C0A3C366F8
+:1098700047378619E354AA6BD38F739470FCE9AF12
+:10988000A727F0B86823C80CB6F72470F8F475B1B0
+:10989000FA3EC47C0B713E983909F9DC61355C01F4
+:1098A0005797391392EEA47AD93CC3A369D0AF4E2F
+:1098B000C8E2FDA9869D581F7B774236EFDF6AC854
+:1098C00033821FF02B36FE4EAC07AF0D13759D0F84
+:1098D00024D27E9816DF2886532F2EC638738F9198
+:1098E00061FEFE1913D8BDDCC0BEB9D5CCE352ABC6
+:1098F00089D76D3F957AF429D41B6A987B7A02F94F
+:1099000051C52AE2EFBCDD42759D8FED2E4B44FA26
+:10991000DF93C0F35C593BA726A17EF917BC7F56A5
+:10992000C2C4E1DF8F75BE38CFF91D59E47F67DD12
+:109930000CE89502F887F098AE87419840E72598A3
+:109940003309F36C8DD1269AE79E04CE7F37DA0E69
+:10995000AAFB8D32ACDE0EEDFD82FE0FE07B095FCF
+:10996000FE51737063CEEE1F35773CEF237D653972
+:10997000D78F7EACFF3B11B4AFC246FA69FFE5E377
+:109980007BB21CE89F7E12CEF1B7D03BBAB14FC577
+:10999000FA0DEF4D582F9191E8AE453C2C327B6F7C
+:1099A00021FEB1AD8EC0F96FB41E78F07B2180042A
+:1099B000FA544FE1F4D1DE0B38B5A03DF8589C03C2
+:1099C000D1E080F7FF00F9408367000E5D5DB89637
+:1099D00067AEFBA381F20C7512E83DE8EF3CC91CB1
+:1099E0001E98E7A2E6AF8BBC266E45E17BA61C5E07
+:1099F0005A628336BF6D258F737B95903CD7A4E365
+:109A00008A7EBF83ECD654ED795D9E71AA886BA7E0
+:109A1000EAE2DA1713849D4966C9C1798035226E5E
+:109A2000B8DC333A0AFD4CD45132E0D5A4CA6C728A
+:109A30004C40CE5B21EE674171BFC667E38FD9EF23
+:109A400047B8C71F63F7915DD7E61DC82F70BC5C90
+:109A50003ECEF132A12FE3A7D3A06FEC3632AF1A7E
+:109A6000584F2107955DC6FFE078BBC98B75CB05C4
+:109A7000077E99E7834BE624035383F010A68633D1
+:109A800035482F5A336242FAB2866F61CFF3C4FC75
+:109A9000118EE49079F6C49477A37DCFB32D27FB84
+:109AA0001E357974C83CAC4709B1F3B028DABF9CC5
+:109AB0000840FD0CF05A704C09B1E793E23CB862E3
+:109AC00036F9A4A2B3FFCD32CA41E199D0EB0786A3
+:109AD000A3CB70F863393F45FFEE1FC55FB4331465
+:109AE0007FB115A1F88B7785E22F7161289E46B86A
+:109AF00043F192B27C5CC8FD9B56E786F46F7EBC56
+:109B000030647C2A18A4E07EDAD33343C6DFD23C2B
+:109B100037A43F76C3A290F199DEA521F7B35E5D2D
+:109B20007143F41EDFB226649C9EDEB7B6FDAF9093
+:109B300079357A7BE0DFBF82DEE6C4507AA70AFD82
+:109B40001AEDE4F565FD46DBD312E8234C13A15E64
+:109B50008B6E7FF76BCC43788A55AA9FF3CC64B4A5
+:109B60000FFD82EC92500FA5C0148634AA5FA7FAAD
+:109B7000BB1F1B0C21FBE28989DCBE2726F27CCDB2
+:109B8000CF4DFCDC520AF88F64870C2C102F031E7B
+:109B900022315EA678FAC7CF60BCDC14DD97A14203
+:109BA0007C6CC6FE4D017DB9C8AC36F6013E26C8B8
+:109BB0005C1F829E4C4B84F93F919E30723FC26382
+:109BC000443F22C5C23C91B9643F287F1CCDE224AA
+:109BD000ACC78F0AE869F51A106BDF8A2C3A07F5D3
+:109BE0001E4282FEAF2586ECE8DD9A7E5A9E49FA37
+:109BF000E9B22DD40FBBFC401A5D3F71AF99F6FB63
+:109C00004F883A446DFDE784DEFA53BD85DAF3F5FB
+:109C1000F6103DB67CE3FA08F41F4F64707F51BB29
+:109C20005E82789B88AD2CEC9AC58EF9AC7BC038EF
+:109C30004701BE5775F7452E62E43716E3BA6B3716
+:109C40005EB9F74DE8D719FC09DC3E7878BDCCC782
+:109C50008CFCCFEA6F5888FF343791C7E973C5FC95
+:109C60000BA0B1039E1600FEA3B17D775A39F227EF
+:109C70005CA7F369B3BB19D59FCC71A7D23EE35162
+:109C8000E6F8701780F89D4495E09CC75CB45FFFD0
+:109C9000D1BDAB2270DCC07CDA3CC028E86F7C1CF4
+:109CA000ED312660DC7F1BAF6F80F759F0BAEB9E79
+:109CB0009427D10E69EFFB88B92F7C88FBDDCC415E
+:109CC000F36AF3331613A29F762C5FF9692CBC6FED
+:109CD000CD0103E513D6749829EEEA5FF1D7AD2FD5
+:109CE000C2FDFB52FA6E42BBFCC98A6FC6203FDC44
+:109CF000BD01F410ACB130CAFD7062509C72E281BB
+:109D00002B11781FECEBA617D1386E36537DEF2759
+:109D10002B368F09F6471F4D2CAAC5E7D8E41B3B0D
+:109D20006F58F27A6622D563097E7A58F0D39AD7B3
+:109D3000C6921FB52662809F787F13AFEFD0D6F111
+:109D4000A1E0C715AF7F5D107CCE7407F0913A8615
+:109D5000EF6BA920533B7B2EE7E0FD57147713C22E
+:109D6000D779F57424F677BEF737829FCDBB31786B
+:109D700051063D0581FD65EDDCE5C2F6D83CA43B0E
+:109D8000C85933CEBFE837AF5DF81DE2A763F3A62D
+:109D9000EFE3981B3C7FC9847D71083C807DA1F86E
+:109DA000A09F85F3731D428F2AB8839E86E7991C76
+:109DB0002AF1B3931DC27D97C62E03C3BA9548DC22
+:109DC000B409CAB345CA06CD08392D49A09F855E9E
+:109DD0007925F1E49D4DE4E787FA3DF96FAF08F18D
+:109DE000775CF08FFC9D97DC8D9807BAAEDFE3338C
+:109DF0002C3145DDB8FF0381B0532A105B38F06B7E
+:109E00004B14FB22420F77A21C61FD3FCE85F97AED
+:109E10005F383F670CA602F5F80F604DF8B0294592
+:109E2000B4D2C50C0BE8C5BD897F78E669D093969E
+:109E300074BE5EEC37E2DFDD9CDF06FCABB7C7919A
+:109E40009E62DFC2DB100F225FA1A7533EC8078BC3
+:109E50000D9233F1BC6FFFDF22314FBB35467D1FC2
+:109E6000E9E03F20D33E4D98D2678A1E222E7B1315
+:109E7000F59E89FB4D546FDEC6F38116D5C9300EB1
+:109E800008B3DB27049FB36B17FA6ED5FE4F4699D4
+:109E9000800E170C3D91D9307FCDAE1D91E8C6DF05
+:109EA0006B747F8A7CB7F2C40705763ACFB671141B
+:109EB0009D03F08DA6BA83F10AF328B983E1A8DBEC
+:109EC000904BC6B8760325E3D9F8F6BC87501FD56A
+:109ED000F9F83A716E2CFCCB6C63D4BFD8D61883DA
+:109EE000F3D5FDB62319E567733C8F135FBF3A8E38
+:109EF0003FAF3005C77F99182DF8D96BC03863B3D1
+:109F0000884F2E5E35D038EDFDE3DB8A643BF043AD
+:109F1000B6AF792FC543ED6615E91AF60AE37868FE
+:109F20000F2339AFEB9CC1309FDF1FCD1C12DCDF4C
+:109F30001AEEFF039D33EB30AB981F0DB337B31808
+:109F4000987FABD80FCD048EC2F34ADA75ED7D61F0
+:109F5000ED3FC55802F981F2B4614A33BBCD168C8E
+:109F6000E708C2733CF2533CBEC767C0FC88FF16CB
+:109F7000C65E26B80270327AAF066726F9735B4D6B
+:109F8000FEB3787E05E0B223FD33198793B58F5574
+:109F900031BE0FB33B691D6176D5E19106C355977C
+:109FA000C3BC68BF7FBC960DC82BCA6F5D78A06F1D
+:109FB0000119D83A9A09F9B63F5B3A2DB80F8A646D
+:109FC00072E0F9711B629E6D1A49718347C638169B
+:109FD000DA88185CA7CACF3B636A2897E301F7C504
+:109FE000AD167E7F603CF0B70DFB363ECE1165B7F7
+:109FF000CE94484E28AF572BE4FD31C977F67690C2
+:10A00000D3BFF8F6E6A8004BCDBB7B884F571ADAD2
+:10A010005F1C0FF7375ADCF94980CFB74E1AE81C9E
+:10A02000E99F5E0BF35662FCB87B63827308F9D03C
+:10A03000CFFFC3E36B9F4F41FAEF9654CC9BF61BC7
+:10A04000FDA310DEDAF6CF4D548FD0768AEA938ED8
+:10A0500024B99DF89EC96D0DB46F3C8535D3BE7192
+:10A0600096387FDD92C4F5C7E563635E6E08C2FF74
+:10A070008349DC0F637EF7CD2837ED423E3BD12F7D
+:10A08000817697F08F7675DD9DA606E5FD1AD8DE00
+:10A0900014C4F75AF636B5DAF57E2F3FCF98F5910E
+:10A0A000E53E6710FFB993B89FE716EFF327B9179E
+:10A0B00024A1DC769D3645AA785EA56514DA911652
+:10A0C000F09FEC43E065406E757254A7F84D38BEC2
+:10A0D000EE1C3F770A746EC2FAFFCD1FB58D5B028E
+:10A0E000D77701AEB1DED373C24C758FBB8CAE1483
+:10A0F0001CDFF0E15739A8B72A1069F0BFAF3A5614
+:10A10000DE8C7803BE2F0E47F9DACE488F69F299BC
+:10A110008DF209CF6723DFE7633F93F4F056532FA7
+:10A120003FF7B98B9FFB04BE273900BEB7A39F90B2
+:10A130006D0739A0E7C7927C6FED35D0F9540FE871
+:10A14000F15BA85F5C85FDADBDA576926FCCC3E7E2
+:10A15000A29CFAF6D23C2D108320E924E60AF61FD1
+:10A16000DB1323898F35FD783091EBFF960C350A90
+:10A17000EBFFADB21C2217417690F7859DECDD50C8
+:10A18000FCEC0BD3D0DE09BB20FC27769CEBF94717
+:10A1900085AD5AF34EE1EC2DB0CE3587E5817A6E70
+:10A1A000F4577D824FF60AFF15ED849AC7EB67F0EE
+:10A1B000FAC40DBCCEB5C0B9BA04CB38265734EFBB
+:10A1C000C3B6D0D55282678EA72DECDDC7CF1EF364
+:10A1D000F3E3AD7BEFC8C27DEAFE136686FB24ADD8
+:10A1E0007FF3FFE175C0C3773B01FF43D825580ECD
+:10A1F000F11F58EA149634F87EBFA4E98FF9952828
+:10A200006F175BE5401FEC612D3038F67F9D54F5EC
+:10A21000AC07004B1BE17C1D59A230D94D6DFF915D
+:10A22000BF25A02DD8758CFB4DAD266716F24FEBE0
+:10A23000E8D0F3FA5AFB62123FE79C6F6643E625CB
+:10A240000F09BB37C6C39E413EAA6D95ED5EA0FBCC
+:10A250008556D96902FFE6ACD39D806765CE31CFC4
+:10A2600082A968E745DCA87D4F6519FA2760A71E1B
+:10A270007C61501EDF807CF450BBC47E066B5EFEAA
+:10A28000D2D0FB0A35629E87DB36EE4F013AAE78BC
+:10A2900025745C8DA813ABD1F92F8792447C98C6A6
+:10A2A000D2D02F01FE21BD605458B719F8F5C16412
+:10A2B0007707C61B9BC5770C407F921C7608BEDCD7
+:10A2C0002AEA04FC5B25DAD7CB7CD52B1BE0F942CC
+:10A2D000C52BA39D62D0E23EC164A7BB1CF10BEB72
+:10A2E0003E86FB35CB851E5CAEF9655EBE9F01E602
+:10A2F00096FCB229CCDB1889EB7E5572F854FC8EA3
+:10A30000C8A03A5C5A779D5877CD8623FB318C5B89
+:10A31000D5123AAE4EACBB4EB76E6D5FFBCF49BAAD
+:10A3200073C837B86FF16723F7133E10F368F7CDA2
+:10A3300023B83EAC05F0906E355ED9EBE57E9D0D01
+:10A34000BFC373BF80F77E41EF3AE633A5C0B8556F
+:10A350002FF075B26743EB3F1F6C7DC484F1959E6F
+:10A360002F966F31923F0A8833A1BFA8E78B156201
+:10A37000DD2B74EBAE754B3AB8B89F3C18AE960522
+:10A3800048D7555B8C0CEB11F5702D6B59528E7CB8
+:10A3900036985F395D5688F90270AEA6737C370A2D
+:10A3A000E7A811822FC7B17144978AD81BA28BDE10
+:10A3B0008FDDBE7F9C15E5FB72F7688ADF35BAEB4F
+:10A3C0009F2F177EF08C0D8CDA0B6D25D6F118A718
+:10A3D000F4181C924AF156E478C0475E87CC2AA153
+:10A3E000DFDF9EB6DE0378CF3D9C5F85F17CDE61CA
+:10A3F000039D77DBD99D4FFBC07907D263D3281F1C
+:10A40000EDA0EFCDC03C643FFB7B72D7E3B980FE8B
+:10A410009ED27C9C57827168E773851D68E8C9B538
+:10A42000069FEF2E18C1E3F5A7923EFB31FAE13308
+:10A43000B61BE97CC30CA3FF3DAC9FDAD9ADD0BEFF
+:10A4400075CDE1A56BC390AEAF49B46FBDBF774D7D
+:10A45000DC62E4AB76A31DF7A1FBDBFF6D2FDEF71B
+:10A460006C91E87B12751D65595BA19FBB31CF11C3
+:10A470007CDE2B375A25F8D8082BC5C3336E3292B1
+:10A480005D3C9F6CFD25FA372B9C1B498ECFEFD985
+:10A4900069A2FAB9AD1243D3BF3F69DF1B888FF3BE
+:10A4A0006F1E31A1935DD27AC4D4F777ECFD052FEE
+:10A4B00004FE1407379B304E59B551EBF799904E77
+:10A4C0002EE1FFD4BE728AFA2BDA24D2332B5E92AD
+:10A4D000E93CFBBE8EB74CC8C7B55B2496981A748E
+:10A4E0007F8314F21D84A58CF3C152A1675632EF0D
+:10A4F00053C9306E6533AF23604F87D6E5AEDC328B
+:10A5000087BEDBB4AC79687DF3B0E0EB87301EBC6E
+:10A5100015BF83143AEE61EDBB5C3A7E7E5CE3E7E7
+:10A520004C9689FCFC55911A950DD7BF3AB2E2E6DC
+:10A53000A1CEB1F7083BACD9C1CB3E03D911FDB8D0
+:10A540008B6D5708DEBA9ECB26B483E5ED9708EFF6
+:10A5500095ED5D54C7711773D7209EEE6AB7DA5137
+:10A560008E2BFBB85E9AD96EF67A25BCDFD284F4C6
+:10A57000ECEFE4758B9E3D12F92F9ABE7A48E0EF1E
+:10A580002181BF874041A7E4A21FCBE3DE8733369A
+:10A59000EE8F81FBB5E27ACD817D91E8EFCD6497B6
+:10A5A000EE457AC07B18BE87BD148AE73B1987E366
+:10A5B000CE2DBCDE596FAFFA4764CDA6FC23C49DF7
+:10A5C000084FCD96503CD7EAE2ED7523B87DDEA466
+:10A5D000C373A59F59B3110E5576786974AF82EF96
+:10A5E000EDCE9128BFDAADA6450DB5FFA8B5EF09B0
+:10A5F000BF59EBCF16E7AB5BECCDB6E038D894CCC7
+:10A60000EDFF8A29B207E934103FA4EFCB510D8149
+:10A61000F801E286DF8C88E771041674BC3B526651
+:10A62000717181F8E18749EB2B73A15FB785CBF995
+:10A63000C5C9301F7EDF4B61E45FD66D31D339C0B1
+:10A640003AA03BC509EDFC1C83AB5D2A437A83FF2E
+:10A65000FDEE888978AE8619E360DD73DA389FCF26
+:10A6600029BD447C72209DAFF7B2A2260EE58F6B08
+:10A670007E389EC35283CF3F805CE2F8DA765E0F6D
+:10A68000D4BAF7EB51A9A8D73AFE3A6A09B45746AB
+:10A69000F0F56B7E9E1FFCBCD1DCCF3986FEE783D4
+:10A6A0009ADCD8F93EDA83C2CE30A989F8BBD6D875
+:10A6B000F2760CFA4D5BF9BE3DDB6DC46F9CB18642
+:10A6C0000F5E6F8A81755F7C5DA27A347CFE09E043
+:10A6D000B38B4B5B4EA31FFDD5560BF98F0F828FAB
+:10A6E000383D77B03C6A72AB7D77AA81AD257F7229
+:10A6F0002D6BA27695E0E38B6D8D26CA9B79839EA8
+:10A700001F3DD8EF58A5E33B537228BF357C104E50
+:10A71000FE5FFF01D98EFB2780A7FF4E0EC687F094
+:10A720002F5AF786113DFB8FD8C85EFC49F0D979C6
+:10A7300091376E982CD3FA0D53789BD5F9D668A42F
+:10A740001FE21BEBDE3777BE358E9FA7F612DE5772
+:10A75000BE8A49F120385BAC94DBD3FA0D1F2CA2E2
+:10A76000EFF0D4ED19806B8C292E00D770FC2F49A7
+:10A770003C1E3448A1F160DD6ED9155CEF05EBB9E4
+:10A780000FF54F929003A6F813D02F1999AC92FDB4
+:10A790006A68E7F43474F016DEBF80E73B8CF4FEA1
+:10A7A00041F78B3D3578FFAB542BDF4FBEEAA9C490
+:10A7B000FE7747CB544FF9DD0F568C0DD69B0CE13D
+:10A7C000047AD619FD0914371E31107C75472E27DF
+:10A7D000A4DB501F6D2CB567A3DEE1FA6EFF68EBBA
+:10A7E00072E4630FBE373130CF6BC2DE325C6F1262
+:10A7F0007A152FF079C57AD7B2B9223EE67C942D2E
+:10A80000FC3D882B26264F1C1C57DCA83F09F6E090
+:10A81000E86209EB89140FC6B53B8F737DD0D0F188
+:10A82000D0A7C8E7759F98A9BEEABB9D0F8DA53A32
+:10A830005BB7FB56F42BBEEA7CF856CAF3496B09AA
+:10A840002E0FC29784FECB8709580FBAAAE3C30420
+:10A85000B2AFBB26AEF744A09F927B275E07BF81B5
+:10A86000F80FFC17E2BF9D3DF99ABF62C579571DED
+:10A87000505C889F5507F20F55A21F71B8381FD53D
+:10A88000B874389FFC953CF4576C01FF455B4F65ED
+:10A8900032AF77E9EF0AA33C81C44673FE61E92138
+:10A8A000FC53D3FA0ED9F59A3639A46E507BCE9D5F
+:10A8B000ACF07D7E8D7F5A2427F1C776DED6B4EDCD
+:10A8C000A4F5AD34B610BD1BB618F9FDADBCD5EA84
+:10A8D000AA3D2CC683F8388497800E334D5EFA6EFD
+:10A8E000C5C154EEBFEBE9F15932CF631C3CE1BE68
+:10A8F00019F9E560917BAC7D08FBE061C53C3E95B4
+:10A9000004BE5BF97925FDB853C93C8E8F8C0D3D93
+:10A910003F3A605F9239FFCC340DFD3DBD9F69F237
+:10A92000C4D83306E08BA39546FB3AE1B78F08FA0B
+:10A930005E42D55D46F20F8E32FB3B5867384BD3F3
+:10A94000AF93B95DD5F2DDAE0D2ADFD7197CAE919C
+:10A95000F4E47C6D3EFD7969E1D7CCD7F935EB3570
+:10A96000FD37868D41FDD722CEB9ADC90CF306E780
+:10A97000A3F4ED7EB18F81E775B06DC8FC98F23617
+:10A9800007BB4EBC41756627C2D8689E97A3FCF5ED
+:10A99000AA61F2D70D03F2382F84BF347A5C10DF3E
+:10A9A00055D1D3E30D81776D9F2D5CECB39D56DCC3
+:10A9B0006F24535DD67913FF8E9A9FE2AB864CEEDF
+:10A9C0001F5D2893685F1CE01C650ED2EB1746F0F4
+:10A9D000B8EABB0B24CA9B76E1788C9F5A24AAABB9
+:10A9E0005EE5EB35211F8D695DF224C9AB871D63E0
+:10A9F00041DFA9986DE17671806EDABA07EC568C6A
+:10AA000087EBE1386A713CDAC159C2EEE9CF218D9A
+:10AA100065BDE51857563B2507EEDBEBE93D77E1D1
+:10AA20008477E2FF013A9F4B761F21FDD67B7901A7
+:10AA3000E63F0F667E3E0AED65ED307CFB3BC1B71D
+:10AA4000DAF7591C63D546FC3EC98F12DD9F207E84
+:10AA5000FB0DDF468E63F87CDF7FAF91902E8CE894
+:10AA6000319C9C9C12F39D4A16DF258CE3FB24CB82
+:10AA7000B18FF26AF48EA4FC42F68DED4B35EC7E7C
+:10AA80003707F5D6C5AE0339A6203A9E5F03F28E8E
+:10AA9000F6A3635F826A0BE63303F1972469FCA691
+:10AAA00008BB18CA77E791EFB2B1FD30321DF5EE61
+:10AAB000F6A391B7E07CBB783BC09FED328D8378E5
+:10AAC00067CCFC8860F89E24F82EB4F07918EB1B54
+:10AAD00053353EF87EE3707C6B4CE1F584217CAB12
+:10AAE000ADB705BF8783FE7DA799BE8783F9E6E8EA
+:10AAF00020B9484DE1F230497CFF660AF3D0F700F7
+:10AB00002789EFE04C51984F89C17D2E9FCCF76586
+:10AB1000F9798602C1BF93145F17D6394C11FB3205
+:10AB200085AC97C64D677E6A9DCC4EE7148A9983A3
+:10AB3000DAC916DF9D9876C96E69A1FA3F5F821265
+:10AB40007DD622CE430C41B7C0FA15FAEE0DF1A521
+:10AB50008CE76186FE6E4A650A9773FA3807D2F76A
+:10AB600002A3FC147EDF0C5F325561155877749B8D
+:10AB7000C22CE100EFF6B70D24BF9D7DAA17EB4074
+:10AB80001DB1E2B92F18D5BB4E7272F944D382754C
+:10AB900012DA7AF5782884F9303F364981C892F084
+:10ABA000E8A3F7DDCEF8398D22A6D207566EC78FFF
+:10ABB00027935EF7539C54027112EA7583C543F8DC
+:10ABC00028C3E4CA44BEBF1109F314364BEC38EE77
+:10ABD00057A4F1F56AF3170223E0B9BD32B15E4C18
+:10ABE000811E8FE1FB1E9154385C6AE7DF094AA0A1
+:10ABF000EF04DD285EFB13F8772123EFF75FFC7E7F
+:10AC00007E60FFC781DF0D8A0C7C8FD281E74C30DC
+:10AC10007FE753CE07FBCD77A72CAD4E9918A897A9
+:10AC2000636EA6A25FA1AF9743F49D0B3ADFACD54C
+:10AC30007BBCEA9DABE2B9B98571163A4F9B6B19A3
+:10AC40009587762B23D15D9D42751F5B6EA14914BC
+:10AC5000EF44574480CFADCC3919F11CA8D7E3DFBE
+:10AC60004F1A38CF94C0E8FC9FD5CCEB199F01B99F
+:10AC7000C0EF178154A958D7C29E28A1FAC7A7A22E
+:10AC80002D0E3C87604678AD01781B2DA2EE47570C
+:10AC900077D96833D0F7381B59389DE79E15E6FE03
+:10ACA0001EAEFFB188623A2F9DB56D5A12F983B07E
+:10ACB000DE69DA7A0D83EB10B1FE0F9FD3D7FF69FF
+:10ACC000EBC2E3EBF85EBBC097B64EBB76DEC7A91E
+:10ACD000849CF7D1D6FF4C385FA71177E2D3E859AF
+:10ACE00015F5837E7D1A3FFC3FDDFB356D605C0012
+:10ACF00000000000000000001F8B080000000000A2
+:10AD0000000B7B2ACBC0F0A31E818565181826F1A5
+:10AD1000A18AD112CFE066607804C42C3C0C0C856B
+:10AD2000407B23807424101F01E2A340ACC2CBC03F
+:10AD3000100BC471403C07C89F0BC4A5409C05750F
+:10AD4000632B0B03433B107702713710EB3033302A
+:10AD5000E832136F7FBE0803C31309045F51126802
+:10AD6000A734FDFC3FD8F00A7DFADA276DC0C0B0E9
+:10AD7000D502C15703B2B759A0AAD96E81DF8C1D85
+:10AD800068F23BD1F8BBF0E83FAB87CAB7D540E5E6
+:10AD90004B693130782285899D067EB7A0E30AA0F1
+:10ADA000DE4A200600FB72DB43680300000000005F
+:10ADB00000000000000000001F8B080000000000E1
+:10ADC000000BE57D0B7854D5B5F03E731EF3C8CC6F
+:10ADD000641242483084092FA30D3821210D14DB61
+:10ADE0008140448A1AD42A54D4098F24E435011F9F
+:10ADF000176BDB0C04232060B058A2463B4150F097
+:10AE0000061D6890200107B034F4A206AFF5D1F614
+:10AE10007A8352400824E20BBDB6FE7BADBD4FE6FF
+:10AE20009C9319A07FFBFFB7FFFDE3D71EF639FB0C
+:10AE3000B1F67AEDB5D65E7B8F6C3213692821DFCF
+:10AE4000C2DF0F089926114206469EF6D7889BC49A
+:10AE500013529F4DCB4984A48D2041221032B986D4
+:10AE6000967309597B27099A3308D97FC484DF5721
+:10AE7000FA5899B60B99AEA1DF47B2F74F64D27674
+:10AE8000F4FD1317446C179841829B693981D0DE19
+:10AE900086133A840F9F933D0DD6D1B47ED39D2661
+:10AEA000627613F2381D868C27C441BC56429BAE95
+:10AEB0001CC1FA7B6C86E93951808FE19479B4BC6E
+:10AEC0006A4A49DE2A5A5A2D33B81A67973C17A0A6
+:10AED000FDBB4CC3711EB4DE13765AEFD1F74AC9DD
+:10AEE0002ADA6EC31C93509245EB352BB3825991ED
+:10AEF000F9ABCF3944E2ED0266533E3CBDFC195636
+:10AF0000E0F98B89261C674D0DC307ADA798520841
+:10AF100069ED3C60F1D1FED654B61E2DA4DF1F1999
+:10AF200061F2500C92473A0F58AFA4E307724D9E5E
+:10AF300091B4769A14165CF6C878E309057C1CADCA
+:10AF4000E7D96171DBFBD7A7FD4E8279AFA67817F1
+:10AF50003322EDC6029CB4DD1A4AB2101DF797B237
+:10AF6000E7308CFBCB1B12850089D4BB1E80847A12
+:10AF7000734C244CEB11A9D742E838AB26BE6519B7
+:10AF800049EBAF2A32C124C81A8FFADD6325D0DF1E
+:10AF9000D4518747005DAFA7DF611E598FCD8279FD
+:10AFA0003F3A452180FF5F0AB41E457163B1F24309
+:10AFB00080CF51435CF09E3EBDD1F0DA2658100E92
+:10AFC000B27A0321790440C0BF55DEE08A61C05FD8
+:10AFD000B9C403E5340F6D6FEFDFBE4B30235D1A4C
+:10AFE000E5402AE02F16FD46707CAECA5C6C057AFF
+:10AFF00010D29052349A90F580271854F2B9673ADB
+:10B0000022F557080C3FEB64E215E8FCE27295E08C
+:10B01000528A6753966B36CCD7EE53C875B4BC5280
+:10B0200008A48A4097D10AD9EC46BEB08EA4E53573
+:10B0300057257A80FFEA85508A04DF6FA0DF699781
+:10B04000078AC6CE06FE6CF228C8CF947F0E03BED8
+:10B05000D7F812C92A377EEFC4F6F6112E33628272
+:10B06000C243F13280F212E035FBA6FAEB87037D92
+:10B07000C6995C40A155C224F73C909F048B0BC637
+:10B0800097C7DD8CF49307260A4443EF9F03BD293D
+:10B090009ED6BA8B7E0ECFA7723F4C1849EBAFCE2F
+:10B0A0007EB911E8F4F4FD16A4DFD3E33A17815C0E
+:10B0B0003D7121E73D1FCAA5E2D94CFB7926FB442F
+:10B0C00006A1033E36EDC304C0DF90110DF7102733
+:10B0D0007DCEE8AD2563287CA4A1687E06F2897048
+:10B0E0000BC5EB90250A715B182DBF25F09D7843A9
+:10B0F00059AC6CA7F319C2E9DCDAF996A518FA9BEA
+:10B1000043C2A39CF8DE929C18D13343724938990C
+:10B11000F6FFC4824328E74F5F9DEC61729E82FC7C
+:10B1200092CEFB4983FA54BFA45848208E3E8774C0
+:10B13000F4DE0C700DC93C3107E0DCFFFA2101E8B8
+:10B14000F6CC986437E8A3045F27E9A2741F92F550
+:10B15000CE8350CF610FA6146561FDBF603B03FC39
+:10B160002D6EEF26C0DB36A1E630D027906DF23091
+:10B170007A333DB8FADEE420E89121B63FCD14875A
+:10B18000211F10924CE1731194937A216C190EEDEA
+:10B190001E60ED8692A000781E921958243AA1BE36
+:10B1A0004F2872F41FB7153422C807E574E0D7EDB5
+:10B1B0000A292F8A2207AF7279AE17C82CE46722BA
+:10B1C000FD15F8666802E31BB5FC0CC043C7DDFE45
+:10B1D0005AE20FB3283CBF5A322C5BA4F0AC857600
+:10B1E00051E4660D97035B07090814AFFB7FF73B3B
+:10B1F0002BE06DBB899441FD4999214B17A72BD0BA
+:10B20000630161FD37656DB4A0BE103291EF16E4A5
+:10B210002B5EEB1890BF65828FB64F7131BDECF09D
+:10B220002841D0CB8E948060A2F0B8B3886B6306BF
+:10B23000EB2E40F13717FE018C2EB1FAABD7240468
+:10B2400057D1EF73B3A8A001DE28AE4C74DCF984AB
+:10B25000CD73AEA77E11D08F902213E073958BD162
+:10B26000A709C6A153694A63FDACB98F0497011FB2
+:10B27000B958FB11D084D26D44EECBFF22D07ED3DF
+:10B28000783B907B68179712B498683B778D89203C
+:10B290007C52F8B000741F9DEC06789A523CFF3E39
+:10B2A00003E09F257936D2CF23000EDA4F538DC9A4
+:10B2B0008BFA225769063DBDCACBF4BC8AAF0C3E5F
+:10B2C0006E9A272CD0B9930CAA27114FDEB0D50562
+:10B2D000E52C064F462E9B571FFCA395E032DA382B
+:10B2E000CD1226504FC54309EFAF84CFC39E125CE9
+:10B2F0002101DCB90C6EBA2E233C69594A33C8418E
+:10B300005A0AEBCF4DF1A3E21DE0B2A970E5D2FAE3
+:10B31000A0873D4A33B0828DC35792C5E0D97FE400
+:10B32000AD0E81F5877265E3F0DAF8FC09C09BCCBD
+:10B33000F53AEDAF450E0B22AD1F1C47DC1BD9685B
+:10B340006E292FF2FDB11A8A075AB0F371C87A3309
+:10B35000CA037D15F896F2C1BC065ACE8CC8C7C880
+:10B3600015669DBCD8F9BC49039323CA366168971A
+:10B370004158D904653A8F924CBD9C118FA64CE17F
+:10B380007000BF53FDB374BCC2F8E72A66C710A2B1
+:10B39000A9077C3ECEFDEC6AFCAEE0BA9EFE5345AA
+:10B3A00007DF909AE4C922E8938E276F36015FDDAC
+:10B3B0004B4C623CF2B3D0A7BFE8783B1687AD3068
+:10B3C000495B475122E02DBD2671B20278ECF06155
+:10B3D000D9D651E3C5272C4D6309194C34E3648059
+:10B3E0007E7555B450BC921A2504FA7A9C164EFA12
+:10B3F0003DFDB5869940AF87171D4A05F94D36B416
+:10B400001F631A86723AE4355A0BC73FF133A8BF5F
+:10B4100092EB131B403C169FAFC173889DEA59AA5B
+:10B42000A7D3298295B1117DB1EAAA77B27D76CEF4
+:10B430003F89F80CC3D3A85734F5AFE2F503C245F2
+:10B44000EB9DC07A2A3CC6EFE70413EA2907D89996
+:10B4500014BF8F12D76C5C973D265C17E3F8FB9006
+:10B46000E7C064A4678878840CD0B77F356BF9E0B7
+:10B4700027F012F4AD14423951D26D681F52398E43
+:10B480008375AF49AA2983F7A1341B01BD7060EA17
+:10B490002101F099D6E61B0A72A8DAB9933DA114EE
+:10B4A00078FFC861DF95289F31EC46D54E34CEE752
+:10B4B0008A6B97A13E18EAEBED80F5DE5E2979AE46
+:10B4C00003FEF251B8ECA827DDE4BB147E4F6029DF
+:10B4D000E859B78F9607D167257F96B1EF2B6BCBD5
+:10B4E000728E4B917E578EA0F628D58BEB3BD75BA7
+:10B4F0006E003BA3C6E406BE5DE379CBE2B54379BB
+:10B50000F200C0736B916AF78505182FED6D2FDA85
+:10B5100079E35C8A0B94D6687338D5A5592F9AA61F
+:10B52000BE3316E020B75222A6C6A6239D2FF2599D
+:10B53000ACF504603169D691FD993B707D799D5CD5
+:10B54000857451D715751DC11EA97E99C7E5E811EF
+:10B5500077C822A0BEA2B24BE9338FEB113BD79B39
+:10B56000540F333DC7D793358B92713D51F527D892
+:10B57000D6A024E6717DBB26FBB9841B284C76D06F
+:10B58000B3A09752C864587F47829E01FD240504EA
+:10B5900018AF699C8BACC2754CAF4F47D6303DF8A5
+:10B5A000480A417EA2EB5033AC774D69A114E8A75D
+:10B5B000A9E680E0D3AC9FEA7AE7A8E924A007E7F0
+:10B5C000E6B2756E6E161BEF0F80A0710C5ED0ABED
+:10B5D000C675EF171377A0B28CE3F69611FF828938
+:10B5E000D9818FCE780BF1B866FE63F8240D1BB0BD
+:10B5F000BF140BA3C1CACC03F87EB5CF340DECEE5B
+:10B60000F552E78A1114FEF5D3E62A01FA7DB587D3
+:10B61000F95DAB26CE7D0ED635B3496170D594A1C8
+:10B62000BD1AC7E1DA007DA39FA8A05F74DF9D1B50
+:10B63000570CA3FDA4503F467043A5A0C54CBFDBEB
+:10B6400081A6A0BF7D6106BF874C2651E0FF0FC1D8
+:10B65000C6FC505F67C748A4A7C905F0C6797A2D14
+:10B66000E027BAA91FE67603BC6EEB6884D7E45ADC
+:10B67000EA8EB4FF3DF717EE82851FECFBD9EF4C45
+:10B6800003F95A7727F3CB8CF0DF3729D861C271E1
+:10B6900008BA758E18789D031A0CF48F27887039B4
+:10B6A00032195CC70546AF473B275F8F7E52117D3D
+:10B6B0004F3B7AAC739815E4DB68EF3D1DF74136DC
+:10B6C000DA3B8675E652E521067D3FDA1C9A8EFC50
+:10B6D000B6CD847A8A10A6E70462727F3B1C1611ED
+:10B6E0000617B21ED5DFCBE5F0ECF9B4FEF29D767D
+:10B6F00002F852F9218DF7B9AA86F24194797708B8
+:10B70000622CBA333B83D3BD13C61B7869FA5369E5
+:10B71000B682DD160AD60F2E07FFA386F9BBA1F06D
+:10B7200001D43F69536E433F654B73F2ECF9C05748
+:10B73000995E0FA0438507EC93687EE27493E5A2BF
+:10B74000FE7B2C3DDC58B91CFDDEC6CEE8F39F68BD
+:10B7500062FE7688EA494F56ECF1F34CCC8E4E30BF
+:10B7600071BE9B7A2845BB9EA9EBAABACE0E914822
+:10B7700040D4AC87B772FC19D74D22355846313EBC
+:10B7800047FFB1713E8B436C9868C2F88ACAE7B430
+:10B790005E0AE095CE03ED39CA8741B0E71E250D5C
+:10B7A000283701DA7E33E90FF79DC47459F39BC043
+:10B7B000E7D7371EF7AFEFE2FA6A5DF6FD56E88A83
+:10B7C0008E9702FCE177323D59E560766CC14E39C7
+:10B7D000FC030A4755B3807696699F15E13CB7890B
+:10B7E0009669D7618782F5CFBA2C58F69B3BD77EF6
+:10B7F0008F967B778A04EDC84C9B09F8F504E757D0
+:10B80000924BCB600F5B59B1AA79FF5DD05F599B1A
+:10B81000995869FF55BB4B6FFC1E2D9776C804AA3B
+:10B82000546D5EAA0CA6E585412104E59EC974A16C
+:10B8300002BC242A41F0DB7B9C9DC93FA2F33E5D04
+:10B840006B216E0A4A9DA333F9568A8FF2E0F642C5
+:10B850006857DE228046A4F3D87C2815E6B555F05B
+:10B86000807F5FB1254E670F9EA053F901FDBE9802
+:10B87000CE13E4B2943414C23A57B5799DE2D6C4DB
+:10B880001F4ED7BA701CB55CB5958E43DB55BF28EB
+:10B8900078608AD526E2033D746EB775D6B3769884
+:10B8A000DF52659403E6F5B002F54A83C52F5BDDF0
+:10B8B000005FB35248BF9737352B10DFF29BC9DDCD
+:10B8C000E0E7566C19A087AB5144795D9C60D908BC
+:10B8D000FA9CD8BD29378FEE4FE7D3B554C78E8A6F
+:10B8E00094CB411F221F0695999AFA43C504E4D7C9
+:10B8F0008A2DA2DECEE6EB7FE028A37F60AF03E3D4
+:10B900007E2AFD16737F59A5DFE2044E4FA9372F1B
+:10B910001A3C6B811E149E06C0177DAEE6F03927D7
+:10B9200092491077717A894B88C2D7C667834C8A4F
+:10B930008175FF75D9CC49522ABA0F8B20F2E45A8F
+:10B940003E7BD2145AFEBDA968B309F587C70D72B4
+:10B95000A4FAD9CF98985CD6A72A88BF86A979CFB0
+:10B96000B2F804C175AF616AC9736017D0F6DB4CD9
+:10B970002887B4FDE8D8ED5D85F9BAF6AEC232B5D8
+:10B98000FD4E6C6FB978FB86C209FAF10BCBD5F688
+:10B990007B117EFBC5E1775D37513FFE7595D8DEA3
+:10B9A0006F66F4EA4DB0A05DB3DCEAF14ACC8E0AD2
+:10B9B000C37B2971D446A827AAFC403ABD607FDB2F
+:10B9C0005B12C6AE225ABE98FC3AC0E1A0D2A2E5F4
+:10B9D0008BF87C9B8E1F13BC89BA32EDC975E23B94
+:10B9E000BC0C83382D088F3258417D3169B005E198
+:10B9F000BD7F9F15CBF74F60F0DE3FD88E72866B10
+:10BA00000BA5E3FD8AEF1AADDD0A2B138492DE103D
+:10BA10007D1F027E23EFDD26786F13490DEA673321
+:10BA2000417DF47046DEB3010D7E560CA1F4A5E510
+:10BA3000B360FF0C8CE0F5E1212529C59A71EA87F6
+:10BA400028B33666B1F7F3EC305E510FE0C1AFF4C6
+:10BA50008E02BBD2388E7958BE6E1C4B7A198EF38B
+:10BA6000B5611C737A99611CCBAC8DFC3D1FE71B43
+:10BA70009857AC711E1E36413F9FF4721CC72C1A9A
+:10BA8000E6935E6E18C7C6E643DFF371ACE2C5E627
+:10BA9000337CA27E3E432B719C2451D1C5ADCC4357
+:10BAA0002B0DE3D8711C780FE39034E6DF28E6DE37
+:10BAB00012A4FFAB5602F6B462F63D0FFD923F5A58
+:10BAC00009EA13371D7710E89544DC2FF80F53224D
+:10BAD000CEE70B1BA5BF5D4BE7806A17A0BDB38007
+:10BAE000834882F5E89F57731E9DDF32337D293CE2
+:10BAF000DB0A528AC1CF5EEFF040FCF45C5B81321E
+:10BB00002F8A5DB0A0413ED1A5E35FAEF72693CC6E
+:10BB10001AF0B3B81DA0964F50FD45A8DEFA90EA82
+:10BB20002F789E94A99EA6EF8F53FD46142DBC4BF3
+:10BB3000B1DD0989E1F144135B47BE587754C6383B
+:10BB40005F80BC9D49E7711B9FC6828638E62B70DB
+:10BB500038FC9C1EBDBBCDC18D480FEF1560F79022
+:10BB6000C6011457BCDE30C0171597442C5E01F691
+:10BB7000D18F576CFF0D547B47281EB298CE775655
+:10BB8000EB3AF90A5A3E2777DDE5B16BFA99257F42
+:10BB900008F3B6D0FFA09FD93E5AD68C7F4799BEF6
+:10BBA0007C279122654AB7A9E2304E0F3EAE3B2872
+:10BBB00003BD6E4B66F0DC09CFB1F0D985F4BACB8A
+:10BBC000C5DAAAF0F81F944918D7A3AE81CCB81DE6
+:10BBD00088F57CEABA6280EF2ED9E22DA2F4BCEBA4
+:10BBE0000111F16884B76B5F9CD744FDAAAEC64FC4
+:10BBF00065F02F2F05FFDD4BF4DF49808DA7E2555F
+:10BC0000E583DB674D1A705C536FB6EFFA01C735F9
+:10BC1000FC7247D94C5DF9CE9AD9BAFA772F29D65A
+:10BC20007D2F0E2CD47D9FB76291AEBCA0E1015D4B
+:10BC3000FDD2C6A5BAEF0B832B75DF2BB6ACD3951F
+:10BC4000AB424FE8EAFBDB9A75DF4DFBAEBA09E485
+:10BC5000B1EEF72201FBEC73FB89B5605F7D6E9757
+:10BC6000D0AFAA065EA37278AA3605F9FB74AD1BA5
+:10BC70009FE7DA72707FCC6FA3F24CD7FA0D75870D
+:10BC800097AE98087A84D6A73AFCA9BA379706A83F
+:10BC9000EFBE1182D494EFC546858407801F93D8E8
+:10BCA000C7D7BDA2E67BD725BE37D2052BA7FF7726
+:10BCB000B12BFAFB1EA17714D87781F7CDB87F138B
+:10BCC000CB7EA07F579028FE83FAEC86F88646EF5D
+:10BCD000BC2A32BBFA1A71F2AB227D562A4CDE2BFB
+:10BCE00077A44E867841A5121E5513C5CEEE1B2FA4
+:10BCF00044811904FD30795918BC2222BF48BFE1A4
+:10BD00003AB9BFC1E4DB07FAB97BBFC8F607C2077F
+:10BD1000D3619FE61AD1FB2ABC276D03717D7CA7F6
+:10BD2000D63BE0F80842DEAB9D86CF3FD4160D80AF
+:10BD3000F8D19F6A6761F9835A1F3EBB6ACBF0F95D
+:10BD4000616D0D7E3F5EBB04CB276A03F83C55BB9B
+:10BD5000029FA76B1BF07B776D2396CFD506F1A9C9
+:10BD6000CA816A8F92246EFF717B9DAE1C583ECFB4
+:10BD7000E720D27F77A25C7B5240AECFDBBF1805B5
+:10BD800076EEF9F7CC18448F852723BFC5A69F17F9
+:10BD9000D7FB9220A57F4EFFEF561BA38FD544A65D
+:10BDA000817FB672A44220AE6E7BF53B682FD3F73D
+:10BDB00012417D19F468F711FBFA87390FBA349DE7
+:10BDC000D4FA279EFCAFBCB959401F465FDB41B196
+:10BDD00086D1ED590FD04D833F6697EDE4FADC80B4
+:10BDE0004789CB9D119F6707AAF8EC4C87784B9544
+:10BDF000586492E8BBF3AD669CD7F9F638B68FED80
+:10BE00004ABAAC785EC516AB4BAB1FAA42092EBD31
+:10BE1000BE487569F5C5F98E679D20F78B534CAE0A
+:10BE2000E339C01F5ECE1F8CEFD4FEAB42192EBB90
+:10BE3000AE1F7DF97C83308DED2BBAE36F8DE21F51
+:10BE4000A8CFC5298AEB38D50BA7B70C8F8771A966
+:10BE50001FE78271BA6B5D2E366E8A4BCB97954B7E
+:10BE60006C585F852F56BFFF68F860C7EF230B8BB8
+:10BE700035419C2656FD98F4903E53C03F20EDF28C
+:10BE800017B0EED832D57547C2B2DAAF3F2406CC30
+:10BE9000D7C0FB16DD78B49D5BF5A1A15D6CBA4BF4
+:10BEA000E4844A4FAA27AFE3F921949991CE3EDA70
+:10BEB000633CEDAF47B2AF80386F86E4467DE787DD
+:10BEC00081283F5559BA149F1BD1DD8971CF7C550C
+:10BED000EEDDB7FF91B2DCC7FF26633C837C437B7A
+:10BEE000A7DF65FE753E2972829331B7B56206E819
+:10BEF000C98F4DAA3DD09007F33E4B4CB89F7F961B
+:10BF0000BCE5CCD1D86565128F4FAE60EB7380FE77
+:10BF100007F3A3769A6EBD2E6DD4974BC8CDC9207A
+:10BF20000F25EB65D8B1250B61BDD7EC9BCC925C9E
+:10BF300038EF5252530F76CA2A99EDA3CE7511E904
+:10BF40000A0A57D5AEA7F3C09EF54B4CDFABFEF304
+:10BF5000C2440677795250F1D2EF1FB5E6DCF63DC8
+:10BF600002ED83F5A0D7020EE289168F99B7420F32
+:10BF7000DFA5E037C24BC8321D1C6ABF2A1CE2167F
+:10BF8000216A9EC6CF2481C775987CAC91F4F6EBEC
+:10BF9000631C0F6A7983A1DC64A8AFF289CCF92411
+:10BFA00043F23D06FAA7CAD25B88761AA1FC911526
+:10BFB000A9A744EA6DB8583D33D413B15E93342E2B
+:10BFC000763D6BA4BFE668FD55EDDAF67280F2535C
+:10BFD000F94B8F3B21E8FBB1D4900CF1AFCACD0FE8
+:10BFE00039014FA7A48013E8FD71508C1A177CB754
+:10BFF0000F5F5EBB007E04B236C5FB0B8FDC08FA18
+:10C00000FA8BCD32E6C5F8B798C366CAC7D5AD0B73
+:10C010006740FC9E968FB1F2C39FC0BEA1BF4D4F3B
+:10C02000CFF2E71F4F863811C524B3B74918ED8EFC
+:10C03000EA4D7F2E043DEE27BDC887C67630FE85CB
+:10C040004494FB6225BEFF77355FC1CFE5CCDFFAB4
+:10C05000C8279097E037F04F59DF7AD2A5401CA14E
+:10C06000437224A15FFE5DF25DD0032A3E4890D961
+:10C0700013755B378C3946E1E9DEF46F4E41E777A3
+:10C08000333E3C1F9AF7AB57DCB1F5CC39EE0F4588
+:10C09000DA05B19DBB8DD93FA49D3D2BE5B013ECD6
+:10C0A000CDCA66D9433994546E7BF6B927C14F7B0C
+:10C0B000DF8C7E5AC5B6DFBC3381962BB6CB4933B5
+:10C0C000D874EC4272842E7EFABF2563237428FF55
+:10C0D000F56F14F768F6FEA789117A546CDFAF90FC
+:10C0E000D1FDF15710DAAF74D9A3D02574AC10ECA0
+:10C0F00095BAAD5F2AE0777DBC4F208332FAB72F27
+:10C100006BFE0DAE878027A423A7531FDDFAD12B2A
+:10C110007CE32BB958CF057A3216BD5EE07AB96A56
+:10C1200097832440FCF30FE6E00CA0E38BF7386123
+:10C130001E27A51AC6D74F3F940CFB7F657220D9E6
+:10C14000854FF6BEEC99FB90DF4A859A64B68FE97D
+:10C150004DE5F1F25498DF82A61FE1FC4A880FF901
+:10C16000AEEC69B108E2C39F4B64DAF628727183C2
+:10C17000CCF69F4E6E3443921F3909763ED8D76F66
+:10C18000891867256411EE83DDA7C671C9622C7F0B
+:10C19000CEF7A546C826D53FB4E8F875D3C39D4071
+:10C1A0009FD343BC83004E8A8700C79700FBFDE204
+:10C1B000D1A983187D58BE01B6A3FABF00DE43FDA6
+:10C1C0004E19F70935EDB8BE64E3DFCBC7A770DBC6
+:10C1D000603D3B99CCF62B8DF35BC2E747FF3A8974
+:10C1E00086BF34F2CDE47DD34A26DFAABC07674E72
+:10C1F00083EF9FBDCDE407DAC1FA41E10A0FC2EF38
+:10C20000FB6F15501F9849389A5C6F92B95CEBBF71
+:10C21000FBA99C425C80C22D413E43844F68FF894C
+:10C22000887FF44B4AD6D3761AFBCC0FE3613D25C9
+:10C23000F25EB37E94723D304DD6CB3F691A785989
+:10C24000F662A54C02605A56BE6F46BFBB729B5C3D
+:10C2500004F33ED372F09D1F53BE3E1352E554AF1C
+:10C260003F8D725AB663B300FC6994D3336574B5DD
+:10C270008E26A7F47D54392DEBFABFA23F55BCF9A9
+:10C280000D78A37A7068822936FE8C7AD021BBA300
+:10C29000EA41FAF736C9EBCF772ABFA97C462DB41D
+:10C2A000A1A0BFFBF851E5B73E7E54F9CD384F3D14
+:10C2B000DE8CDF2780A146E12ADA2DA35F52D9CE9A
+:10C2C000F66F68BB4357E4227EBCB87C9186435727
+:10C2D0002469CB41433964A8EF35948B0CF57D86F6
+:10C2E000728DAE7E65DB418525198575F5CC4B9E3B
+:10C2F000241F45B1EFD575C6DFFA8912007E48EBE1
+:10C300005540CFC9CBA86906F1B3BD22FA5B3DEE1B
+:10C310005E67227DFF9095F9B13D2E5E4E60E5DEB1
+:10C32000814A3DE839F57DAF95C5397B8A7A9D090B
+:10C330001AFFFE58BBE884FDE0AE20CB47ED0F4F5F
+:10C340001DCA4D1789F59DC505A78AF6F425E0BFDE
+:10C3500035881E700DE72FBDDD09FB6E3DEDC36F07
+:10C360009A45DF2F382C82F94C7A6CCE31001709B0
+:10C3700078A5D43C9E3F41FF4E91C02F2742DE441A
+:10C380003BB3AFE7AF36D8C3F67B15CC2F5BAF8995
+:10C390006B69F8BF9CF753D6A4FF5E4E5623FF95FA
+:10C3A0001BE4C1C7FD81A3AA3C64936CB6BF4D9842
+:10C3B0001FCBF5EE5431EBA65914EF3D1D22E6CD0F
+:10C3C0009E6F17493DCCB345C07D4E1218887255FB
+:10C3D0004D7A51DFA978E906B95162EBA3EE9DFFD2
+:10C3E00091F720F0C7CB7F1CF3147D76BFFCFEA82D
+:10C3F0003D50DEF56EFA1F49FFFA05FBBEC27DC453
+:10C400009E7D668C73F5ECFB6DFA83507EC58C7156
+:10C41000AE9E6566DC4709EC730447C2F721CC1F6A
+:10C42000A8DBFBE5189627B91CE9F48DCCFC91F349
+:10C43000EDFFF501E48F9C6FA7B302BB605F1CCAE0
+:10C440008DFF152BFADF3D7BBFCCF3D9FF71F3A92C
+:10C4500056880FF9CF4166ED007E4D60F160FF9E7A
+:10C46000F1CF427E7355EB7E05E2EC05AFFE650C25
+:10C47000E8C99E1DCCDE3927773D03FB6166E59355
+:10C480006532C5F339109EC1843CAB8C2D086445E0
+:10C49000C30BC3430FC503CC8BE2A50CF47B2C7CF0
+:10C4A000A42BFFACF8F8E42EA6C7BE8B79F611BC1E
+:10C4B000085EF6DE11B408387FF67EDF976340CF62
+:10C4C0009C092D457BE452F3BE5661FB2CFF73E6BD
+:10C4D0002D842F67DE73FE69E9CDF8FF43585F07AF
+:10C4E000F69783FE7CBEEB7E2CBFE8F020BC97293C
+:10C4F000FF3FFD9F46F71D94EECE4BD3FDA97FDA9B
+:10C50000795F8AEE8739DD1D2ED85FEED9FB178C57
+:10C510009BAAF3BFD4BC5FF97F74DEAABD3EDD5495
+:10C52000736426AD7F8484D71751385F4B9BFAF62E
+:10C530004CFAF5B731EC91D30A8B7FFC96B03CC135
+:10C54000408AC0F23CB85F5440D8BA5E90598A76AF
+:10C550004641E623681F10A9E64836C5C7F4F4052E
+:10C560001E960F3616CFA15C977AAD07E38106FFC2
+:10C57000F0A040BC900F5D70F5F51DE0AF4C499305
+:10C58000C3E631F83C06CF43CE69ECBD5DEF17CD75
+:10C5900000BF46E3E75DEFD67F2FE4FD4D238B8F91
+:10C5A000CCA4E34F4B135D416837A94182F9CCA07D
+:10C5B000C2DDA0D90F2A34F47708FC5A4DBCEC6FC9
+:10C5C000C55F9A99F991BFA5E36703FED2648C0712
+:10C5D0005E127F84E57F5D979A8DE75188E441FC88
+:10C5E0004D1F5CC5F1C9FC6689B797ECF59D20B776
+:10C5F00012A17E2FB3CBD05F56FDDE587826DC8F9C
+:10C6000096F8902ADEA53419F35535FD213E547A6B
+:10C61000FCAD7450E9F7F7D2E39C811E699FB92401
+:10C6200090CF026EFF4FF9AC53C4729A47C2FD28F7
+:10C630006EFF4FB2274860FF5F2B1D15412E4B2D1B
+:10C640006DD3214E6FF108C8D757769BD0BFB1E4A8
+:10C650000A88F7CC4609CB474DAE716068DFF8BD5C
+:10C660005D671E20101FF62A68789322169FFFE64A
+:10C67000DB6F27AAE735F03B213750FCCE6F2261F4
+:10C680001B9DE7028904E21321BE2B900F75F15D1B
+:10C690007D19FEBE9F1CE9E752F563E9917FF473B3
+:10C6A00017D55B1F52E6D80D4FDC57A12CA1F18F97
+:10C6B000BFDBCEF0E53F4282C3502F78C522CDBE0E
+:10C6C000D92366A63F76FD69470EC4C526F564C525
+:10C6D000337D3A02FD023FF70BCE13773CE41F9CFB
+:10C6E0006F1F1E8FFB821DA2C317252EB395FBCF94
+:10C6F000FF0AF914F4D9B38934C0398C1ED28BF1F6
+:10C70000D8C0264BD4FDDDFBCD6ABC89D38DFE8914
+:10C71000EA792337E68B04E2B574EB9EF1B134A6D7
+:10C720003F1DE0EF43CD7EC9DF8B5FF0D701BF5BDC
+:10C73000AD5D85D1CE83ADE0F8BBF1C05718C7BC65
+:10C74000BABDD904FC7BF526936EBF3160E67ED777
+:10C75000583216E0BAF180D5910B74E9103D903F44
+:10C76000E86FFF44F145D9B732E213FA87B8F83ED3
+:10C77000338BF3EF9143F300AF7BCE5A303F67B773
+:10C78000D250110DCE2BAD4CCF2D20A17BC664FC19
+:10C79000F3E177528F3D3C19FCCC4D84C7318CFCC2
+:10C7A00047908FCF6F21783E14FC52D00BE75BD8B7
+:10C7B00039608A9235E04F5379FF81362E7365DBFD
+:10C7C000F67F053BA0BA5D7041EA6CB5D4A540BCCC
+:10C7D000D5DF9620C2BA9BED56F32A5DA36FD5C86C
+:10C7E000C53E33CB373E3861CF1D30EEA7DD0A01A1
+:10C7F0007BC4FB5AAF13D6ED4FDB73E2A3E5CDABA1
+:10C80000CF5FD792E95324E88720DE8DFC90D56274
+:10C81000D395BF27FA06837CDD68EEBAD713857EF1
+:10C820003E0BE3B3CBD66FC1FFCFF4DBDBAA7EF3C5
+:10C8300089451A39CAB4F4D36F83A2E9B7C5827B9C
+:10C8400010E07DF1DEE18380AE8B0FCB03A3E9B76F
+:10C850006DB56C3FEF259E0FDBD34AF5DB351AFD36
+:10C86000D66AC1BC3863BB448B89AF8B97D06FC18C
+:10C87000FF1EF9DB06FA2DCA7C475A98DE50F5DB1D
+:10C8800098F663A8DFC6B49A7479A369964BE93722
+:10C8900061E0AD600F77C89EB828FCB38DDBDF2F59
+:10C8A000F13C3C1807F4DC1D16B6BF79B97A2ECBE3
+:10C8B000CAE87D493DF7DF846755CF2DDEA99E7319
+:10C8C00034F221D3738B77533D27003F323DB77845
+:10C8D0002FBBC7C1A8DF32FBE93782F5ABC3ACBDC4
+:10C8E000BF2D63C31CDADF58AFECB1D0FA6323FA73
+:10C8F0006E9C56DFDD6161F72EF4D3771D97A7EFAD
+:10C9000076727D47F5D830D0AF46FEF0B4EBF38EAB
+:10C91000F78C3FD9F26B9097D745DC373CCACFA54F
+:10C92000BD31FE642EF0578B85E9DF3ACE7FE76A92
+:10C9300003D87FC16B6C7E5576968F5CDDCAECC3E5
+:10C94000EA1621E8A6FF2C9CF09502F02FDC2B9034
+:10C9500041B43CD3CCEA93E7D57D2F32235BC30FA0
+:10C96000F3F32B306E3F5F221688CB57D80B3F86F0
+:10C97000787C453E8BE357F0F70B0F77D5433C7B34
+:10C98000E11302EE7B129E0FA0E63796B62FC57814
+:10C99000AD312F40D5E70B83FAF715867CC6663E8E
+:10C9A000CF996217E285BC2946CD4B6836E2A38356
+:10C9B000E3639388EB661F3E287EDC19FDF1412975
+:10C9C0003A233B3932FF85AFD379E546E6A5E2C38A
+:10C9D000383F35EE5CC1DBC59AAF8ABF7EF355F1B7
+:10C9E0006998F7B3A037402164931CC88BA17C8061
+:10C9F0007A23F03B11CFEF174D1A3948AB87B77246
+:10CA00007D9ED330A9209500BE480DF04D49E3A28C
+:10CA100043A974DEE3DE738F85E5F17B13CC3ED84A
+:10CA20001FDD6AED45BDA6F2D5D79CAFDEE178DC0F
+:10CA300033B806CFA9FADB0417D815FEB015F1E715
+:10CA4000A7F883F32B7E7E7ED14FF90BE4E9E01348
+:10CA50005F307CED15DC101F2F54D71FC03FAD9FFA
+:10CA6000D3CEF0EF0F0A88FF5CD28BFB23D58D82EB
+:10CA7000274CEB57B72DC2BC0755DFD23FBB961EE4
+:10CA80001A7E94A2F12356D2AC7F15BCDE8DE686C9
+:10CA900077803F6F7C5E26CD1AFECCA4FF7D1B8580
+:10CAA0004E2A3E2FC59717389EB6011EED80AF5E09
+:10CAB000663F85BFC27334EA77BF14D0E1B1E0C9E5
+:10CAC0000B17C5D338154FC0A7A0A7DA8B452897F9
+:10CAD000B409644046FF79C2FEA4566E17EE3DC607
+:10CAE000FA7F5AC07B4B8C7CABCEBB1FDFC6E057B6
+:10CAF0003897067ED1E5F2EDD706BE7DC3DA7B24FA
+:10CB000007F876AFC0E207ED09BAFDC5C156B6FE1B
+:10CB10006FB552FE867DADC3B267A3BBBF7CC7F1C4
+:10CB2000F50BEC7EEDB9A4AB602290F7B8C5827925
+:10CB30006408C73066576AF5EA362B19786B6EECD5
+:10CB4000FE5379FFB1EC1AB53C1AC6837CAF363A76
+:10CB50005E66643CA35E57FDFC4BCD6BD4DF39AF02
+:10CB6000BE3C4CD289FB4E1992EF51B3260FEE36E4
+:10CB70009E67442140FB4A532FCB72917A24C5858E
+:10CB8000E79FEE71A97CC6F2DD8B781EFB5471E243
+:10CB9000BBB07E7EEA65FB7CB926F2FB89A09F27AD
+:10CBA000CB788EEFD32332C66B3F9DC2F2386F7ABB
+:10CBB000FDA004719A9B4039517CDC344E407F05C6
+:10CBC0008E61C1BED92E6ADF7847E17C72E01C57C6
+:10CBD000F6A68602387F3C764BB00E9E9E82DEA47F
+:10CBE00037008F93440278ECF40E2880FB93EEF923
+:10CBF00033C1FB43E83A8BEDC7769081506F827763
+:10CC000020BA03E35BD717407C74E641BB1DEE6797
+:10CC1000C96C32519F2182BF09245807FBEDE38F75
+:10CC20007B6F0178CBA8BD0071E7B2F6E63A279496
+:10CC30009B048F9BF6EF0FF80A9D741EDB1A3F29A9
+:10CC4000FC0EC823AD07DDF89B583DFF26B87808D9
+:10CC5000DEAFC33C9B924D021EFCDA16148885F5AC
+:10CC60001BB4D07EB735D1F6B9B04ED0F6D0EFA612
+:10CC70004FDEBE05E4FD88C8DAB7B07DEA12DACE31
+:10CC80000D7CBB6911F6B7B0492029B4BFB216B606
+:10CC90000E941D913DF0BD75FF13B88ECDA0E3A598
+:10CCA0006680DE0F4F8132C9115C18EFAC1C8574B1
+:10CCB000EBE1724E268E64FA43E065EE37A876D338
+:10CCC0003B5696EF5BE259AA0CA0FDBC913F3003A6
+:10CCD000D202FC6D9FE0FEF3718A671FEDF228CF50
+:10CCE000DB3898FF91D2A559873EB5B2FBADE6B7C8
+:10CCF0004DC27C8605A408F3196E1CCFECB537AF86
+:10CD0000B506E18A8337E5DE34787FF05A33DABF3F
+:10CD1000E7B6C9C847E78674617CFA64938CE786F6
+:10CD2000EB9AD8FD5C275BD83A2E3ECDF6F54B1D2D
+:10CD30000A960F36DD5208EBDBC94DECBC63C1D35C
+:10CD400053152897360B1E767F11D38FAAFF56E214
+:10CD500062F908AAFEABE2F3EE97B768D07755EA1E
+:10CD60007A63D07755B0AFEC84A7FEBD9FD8991EEB
+:10CD700004BB1FE81EFE0AF9B7FA884CC0EE173E46
+:10CD8000EA2EC47CACBD02C6F3C7B70B5ED8D72F62
+:10CD90007BCF1C447B35587CF74F408FBF6F26827A
+:10CDA0001BF2DA29DEA97EC837F7FEE917F4FDC7C2
+:10CDB000472D900943F9A418F1ACE67FE66E667939
+:10CDC0002CB947D727C3794B326500EADBD24691AD
+:10CDD000F8347AE363C17BCB8F995EC6FB2954FAA2
+:10CDE000E52A0D25B08E0DB731BDE4DE2C438E084B
+:10CDF00039CCE324D49EC6F3B70B77AF4B5668BD4E
+:10CE00007A9EFFB170EFBA6491BEAF83F58BD65FA7
+:10CE1000A8B0FE17EE135CCD9AFED5F66A7F6A3F86
+:10CE2000CA6E7D3FC3F7F2F265F6A3C2A18E1FCB97
+:10CE30001ECFFFF70BEBE1BE98FC37454C3ACEFF17
+:10CE400068C670ED7E87FA54E3AF796F9B8857838D
+:10CE5000B7FC3FD98857C317ADE3A87C53BADDD0E0
+:10CE600026040194D671C794AA5C2CBB409EAB7972
+:10CE70009CB67A0ADBB76ACD3EBA1CE47B46AE802C
+:10CE80007C40023E654012DA416ED85F28CD65EDE8
+:10CE90004B697B90BBD627981C527DE0067D51DD07
+:10CEA000B4AE10EB6F12DCD07F6B7331AEF765F967
+:10CEB00022C1EF9B8EA1FD51D6762C09E495CAE7DD
+:10CEC0007A587FAB279AF13E2F55EE54397E53E6C0
+:10CED000F735595CA321AFFF41002A8AFC8A470835
+:10CEE000F3535B6494337F3E93CB37B78928CF07E6
+:10CEF000AFBD1DE5F0DC6621861C1728702EF96495
+:10CF0000907DEF93E3AD029763A61F4EDA995C170D
+:10CF1000C07790E39D02F707993D689463552E2FE3
+:10CF200025BF155B0CF21C436E3BA5AE5B61DC7B41
+:10CF3000AEB522DC05DFDFFDCE3DA87F64CCFB284B
+:10CF4000F8FE03C9A0EF4A2496AFA4E2B14A62F901
+:10CF50006CFDE058BF5449BD2C78F4703C657544B5
+:10CF6000F487087CCEEEE10A6C9291CF8D72F8F7CF
+:10CF7000CACF3F4A9E0F73FE51E111F7B2F6903FC0
+:10CF800016A678FA6DCBB398A77AF6856337029E1A
+:10CF90002BF650BEA5F33DD7E2E0F7BD04719D2905
+:10CFA0006F15310F9C48E1BC5B1C5AB96479481578
+:10CFB0002F39903FCA77B07CD2F2973F1A837922FB
+:10CFC000CB7A31BF2AF002B737035D6380AFCB2540
+:10CFD000960F6594F35B6DCCFEECDE1D370BE621FE
+:10CFE0006C61E7F4CB43B7CBC0876ABD1FDA64B589
+:10CFF0001EEE5F0628DFC2FE3AC0A73D77AEE641CF
+:10D00000756F65725FDE26A3BF54BEA519E3D8FE17
+:10D010002D9F609E7BC14BDB307EE06F13F5798FD7
+:10D020005B44DCC7A24FDCAF32E61F56B756E17E49
+:10D030005B7588E7F719F2DF2A5EDAFB7280A2A639
+:10D04000E2D7CF3B410F9CEEDCEC047CD2FE306F8C
+:10D05000F0FB9F49BABCA8D8F9BD5E7D3E6168650A
+:10D06000D47CC2D3F00FCAE00FD838BFAA79985B3E
+:10D0700006F03CED705E5194F87DDFB99D6D9F3FE9
+:10D080000379EEDD3BCE3C037057FEF5D367209F5E
+:10D0900089ECB3E2BAE47FE1F79827ACB6FB858D63
+:10D0A000FBF95B9FC7FCEA73EF9BD1CF39B7F764FD
+:10D0B0003AE4AF9DDBFE5532C4E3EEDD3B15E3956C
+:10D0C000F7EE2C1844A2E877F5097C19BC8CFC6EAD
+:10D0D000231D0EB61EC4BCABB3EF99519FF5E58579
+:10D0E00086AA589EAD9BE783B644CFA357F318ABEF
+:10D0F0005B6FB9E95AD0CFADCC9EEBCB6BBC541E65
+:10D10000E8DB949ED75C06DD5A789EAF816E67E1BE
+:10D110001F943E2103DD3E6F5DF0AB27E15BEB80AA
+:10D120009879A0E1CBC0979AA7FF739B778F0DCE1C
+:10D13000FDED880BA4307A05670860EF7D9E0EE751
+:10D140001A4EC9BD98EFD1BBD7EC827CC6F2BDEFB9
+:10D15000A27C9CDB7914E3AA84E7C99F237D7F2C02
+:10D16000AF59E0F3DBE460F9A31CEF905FEA76E2ED
+:10D170007B9E47CAF856CD2F8D9557DA6B1BC6E2BA
+:10D18000D0FCDC4015F593F8BD597DF9A6423ED0A0
+:10D19000E9982E4F579DB7B13F17D79B91FCE8E810
+:10D1A00079BB6ABE60844E6C1D51F39FCF35F3BCD2
+:10D1B00069FA3E6D2CE4C1B1F5DA1F14DE2551E4A5
+:10D1C00051CD8F3E6333E445072F2F2FFA52F0FEE7
+:10D1D000EFE2E3031B8B57AB78E9FE26BA3E56E23B
+:10D1E00098DD49FD53390EF705987F7A37F74F558B
+:10D1F0007CA9F0D68798DDD0BD85F9074679AE8E3B
+:10D20000715F52121FA7BA6DFF18D03BDD0776730E
+:10D210007E63FC5CDD728CE5DD52FD1CD4EA677E2A
+:10D22000BF84B1BF74DE9FBF3D7A7FFE964FA2F6EA
+:10D23000775AF2DE0EF09FEE6476D2E990382DDA5E
+:10D24000FD36963859973F50EF60F765884E1BDAE8
+:10D2500047F73AF2DF8B4F82A782793D754B791EF3
+:10D26000D0CF3C78AF689D633A01781E02FC68E23B
+:10D270000CB2CB47C04E93538A72457704DE3E7A98
+:10D28000249948504B7F299C06FAFC83EC9332F496
+:10D29000F79F86F8C87F4AA47E1085EB3F0382671C
+:10D2A000A93BB65DAD967D3F1575F18C6A73EF07AE
+:10D2B000609F9357ADB81F2EEEB306303EF60CBB01
+:10D2C00057E3E0CE2F9FC37B797E6526DC2E14408A
+:10D2D0001F94F238C5C99D5F3EF35F604742633AD1
+:10D2E0007EE933B43ED8CF2D7168EFF7EC881F0389
+:10D2F0007180D2571FBC11F44529E83EB0335F1A44
+:10D3000014ACA3FD9D18C8CA27B60DC17301153B07
+:10D310001C984F7870E7AE6AD0F7E75E8A23A0EFDB
+:10D32000CFCA5D7F85B27F4F3C6976A3DDE7D6AE7D
+:10D33000AB0B89E4D6DA731550D6E5B710CC6FC1C4
+:10D34000F81BE5E78AB6783CFFA1A9C7E539309814
+:10D35000DF133518E48EDA8D6E7DDE33FB3E3F8EB3
+:10D36000E92FBFB9F77E761F02ABEF577A4B58B95A
+:10D37000613093DB4EACBF48E557FEBD7FBFACBE0E
+:10D380003F8EC50322FDB0F6D56676BF8691BE3FBF
+:10D390008D13F879DCBF5C19EDFE8928F0B37BB9F9
+:10D3A000041280FB57C9762BE669552AE15190AFEC
+:10D3B000FEB2C2F63F2A9DE15190AFBE87EBBF4A55
+:10D3C0001B2DD3F783391C501FCAC4D2F522DEEBC4
+:10D3D000B4CB8AF7E155BDEAF0A29FF0F297279E01
+:10D3E000CA857CB538CC93AE7AF55F90FE55E6F0F1
+:10D3F0005DC0FFBDDBCD783F69F7F6C3E9603774E8
+:10D40000CBE1F4C48BECEB5485CCBA7D6A751EA7D6
+:10D410006B974C8073BCEA39C3F218FAE2F5389680
+:10D42000D7D11CE7FD15D373FAFB654ED7CED2DDFD
+:10D430009B586E89AEC75A402F68E27862E45C61FF
+:10D440000BF47B9674D50FA624A9127A717FBC7C4D
+:10D450004B461AF8BB07AC57E2BED501D98DFE206A
+:10D460003CB5FAF854AD2747C2F3F499391285A3B5
+:10D47000A7F99392C104F203ADB3A2E9A7BD7171FC
+:10D48000C84FE51673D4F39BBFE3FCB60DE46D1CE7
+:10D490001BCF931519F7801C54008E897637CEA7C1
+:10D4A0009CFA01EC9EA8D939DA73DB0BA506AC47D0
+:10D4B000E50BF1B190AC5772EDFDF5CAC225B93953
+:10D4C000520E2AACAFFBF84D8CD0890492D04E920C
+:10D4D000380DC9FA545DBEBF241759005F0A29727E
+:10D4E000492290BA01E5D44642F8B4533384AD439F
+:10D4F0003504E2E3A7F8FEAC59723F8AF7CD748891
+:10D50000A8CF2F85B777E39C08B759AA211EB43757
+:10D5100066B8C01E13023EF22DE587BADA6939EC0F
+:10D520005C38F142BE1BA6BE51F89CAE435F817DC4
+:10D5300040F98CDD63F57D12ACA3E3C131638CFF50
+:10D540004D66F7D91BC7FB86D38104F6EBEE3B870C
+:10D55000BF5EF5FE3CF0D7E3FF9A0FFB317617096B
+:10D5600083BD146727E1B831704F9E745A2BBF4EAC
+:10D57000C2CAC3283B835E734DD47F37F235F1486E
+:10D580009FF5E94511DB7F6668FFD9C5DAABF8F096
+:10D590005B367A8EE744F062E373084CF65CE8028F
+:10D5A0007C8C717AEA808E4AEF070F023EC6D899CA
+:10D5B0003F98D448B4FE5A8E9DE9ABE5FCFE69FA6B
+:10D5C0005764D7F4475C168C8FAEE478EFABAFC6E8
+:10D5D0004DFAD5B74A80D77EF5ADB1EADBA2D77751
+:10D5E000C482272E3A3C0931FA0F44AF5FFDEABBF3
+:10D5F0006F84DDF092E90D08CEF373CB3976F0AF8E
+:10D60000E23F482E665CC1F6030C74B301FF517E05
+:10D61000B08DD0BC87FFCBD2D06F5814FA9330F2C4
+:10D620005D31878796EDA914BE1F7370A76C62FBEE
+:10D630009573EE6571A21F5B587EE9317E1FD09C09
+:10D6400046E657CF59C2F61149193BE7E3A2FFC19D
+:10D650007877422794DE773608C17006DC5B63B0CA
+:10D660005FFBEEC759A840FD6243DC45E527F53C6A
+:10D67000D23C6E5F6770FE5C407A1D20F7C673EF88
+:10D68000AF71BDA6EAFDC03A9209E7F64593CD0316
+:10D69000FBA3223F674A9CEC3E3FE21DC2EE97533C
+:10D6A000F3B832DDF1B0BE91107FCFF759165FEFBE
+:10D6B0001EA43DA7255DB0E1FD2075B22705F4A0AD
+:10D6C0007C81DA75D455532E0C236ECD39326ACF56
+:10D6D000A170CB2E765FA2E42A22A56007F2FB019F
+:10D6E00048D2F43EBBEB4D8A87C5EBDC786E758182
+:10D6F0009DD999BF7014DD631F07F665BE87DD7382
+:10D70000ABA76360279B5F1DCC2FA33FDC758AC747
+:10D710008376E7746A31601CC783BFEF209ADDEF20
+:10D72000BA411EFF4D66BF57D00F0F8C7EE7931294
+:10D73000F15EF6F9CE551F009FAEE6F711AEA8CD0B
+:10D74000C4E7AADA14B43BEB6B3DF854F162F13450
+:10D75000E0BD6F9611AC3F8BCBC7EC0A6ACB403E65
+:10D7600085E4AA0943D9925643C0DEB5F6E1A70184
+:10D77000F1A3F4957D5836BBD8EF46C88D3310CF52
+:10D78000B43D29A5DF173B7C4F829C58DD57EBEE5B
+:10D790009133A78C35DC3768C09BCA1FDB18FED6D7
+:10D7A000088C3F8CF85B2377BA615F79CDF57DF704
+:10D7B000CE20FEA879CFF0F73BB6CF16137FAE444C
+:10D7C000B45FE7E7D5DF55475F3DC2F7171FAECD22
+:10D7D000477CADE4F7483E54EBC5A708F8A3F33304
+:10D7E000670508DC8FCE7E1B823EED455EB87F1656
+:10D7F0007817F027DA193ECD2935B8BF66B1337CEA
+:10D8000089F600E245B6337C8976C66F0A2F4B80D5
+:10D81000BF1C6C8FEF29FE0E007F59D226E8F0A5C1
+:10D82000244DBE3CFC3D41F147E148E2F265C44372
+:10D8300092C2EEA754E52A961DF7389D3FACDB1B3C
+:10D840006A093E07C6F0178739D8BA9964AAD92F52
+:10D85000033E12095F4F02242D8FB0D443F84B09C9
+:10D860001037940506076918A2BB57527449867B86
+:10D87000D9DC1B800FD61F964D902F2F2E99AE3BD3
+:10D880000F2ACEF226B8119F3EBCA7F9915A37D283
+:10D890006F1DD011EE01E5FED7439C9E0FF37B2850
+:10D8A0005772F958C3E5E5512E2775FCDEE4D5D350
+:10D8B000589E5552B689DF571626DA3CA6044F8883
+:10D8C00028142EB4A9DDF8C47B16C97BE6E048DA3B
+:10D8D0002E2E8B78814F12DE7B20C8EE6B2C4A05F2
+:10D8E0003B2841BD7F71A23B61361E840D4BCCEFBE
+:10D8F000A0AA10FD984E53B47BAAEA3C072C100F47
+:10D900008D054F9CC79BF1101D2FAED181F6FB00FA
+:10D910005FD1EC05B46C6F8CC3F85F1CFF7D163BC8
+:10D9200085BB5443EF58F7506F745C1FEFA0F4743D
+:10D93000018CF4F958E370FC5D96C7E522FC1D9755
+:10D94000C7F97AAADE73AEB6FB9AEB4767EED53A13
+:10D95000BF75BDECC576AE897AF95FCFF56DE2147F
+:10D960003D9FABFAF6789FBEF50D0378922F4C41A0
+:10D970003D96747374BD5B272B786F79DD6826E75D
+:10D980008162859D6BE9AF07304E7DDE376A23E803
+:10D990005195AF9611A67702C4E6C17588DF6FA3D3
+:10D9A000DAC12BE01E40AE5FE1298E60BF3F903CA4
+:10D9B00087DDE7BB9ADF63B596F215C17B4F3DF873
+:10D9C0009CEE60FB13CB2C63F13EB53ABB09F584AA
+:10D9D000F4BE39082687B47FBC0BE20592ECE9F46B
+:10D9E00042BCCF2185E0DEDC3A7B2EDEFB2E24E438
+:10D9F000BA80FE5F38E60FBD583E1D9D28DE97E9D0
+:10DA00004A2A221F66E16E009E5F915D3713881BD4
+:10DA10006E48AAB102DEC63B585CBFB1380FF14870
+:10DA2000F17B936360A49F41B3A6F7DD8305DD6EB0
+:10DA300088710EE60E07B397485A808CD0C879A338
+:10DA4000FA3B27EE00C9D4C8FBB2918504F687FAE9
+:10DA5000CB790C3DB699E9B1E542743DA6DA99AAB5
+:10DA60001E930DFA417DD60F9DA63BA7A524798074
+:10DA700077E1193079C0BE7BB9FE8E04C4430DE056
+:10DA800081A44CEFF35F7F300CECC7BCA8FC66D4DC
+:10DA90005FF3FBD6736F32D0E994EC1E341BF8E9C8
+:10DAA00070F4F57CD263573D0A7C30FF77A2A0DD8D
+:10DAB0004F29BDB002D7D3920BF9F82C6B9C867C12
+:10DAC0004F200AAEF1C34E36DDE704B84E36F23CC5
+:10DAD00080263908F919271BEFC3FB4A20CF5BD4F6
+:10DAE000ECEF935C37DA97EA3D632783F738B5FBB1
+:10DAF000BB25BFB07AC16E8DC55F254DD1FD7A586B
+:10DB000043217E4A01CC047B98DA37BD61B07F3671
+:10DB10009A3D011229071EB346CD4F5CEC98FA38A6
+:10DB2000E07DB1C3FB34C839B1B37B4163F3391B2A
+:10DB3000F7046C02C37ED3933C4F53F239B5F7BB65
+:10DB4000F5DDC7C9E324C412E3BB4DFD7D8318DFB7
+:10DB50009D2C9F83B8A27F57FD84B8889FD006F381
+:10DB6000A86A3C53FF3EE289FB091CEE533283FB5B
+:10DB7000D47366F63B3706BE38C5F347160A0CAFBA
+:10DB80002A7F9FEAB3777C780F8D91FF848D576D44
+:10DB9000184FFBFDB443C6385C25E51FE01B61E36D
+:10DBA00078CC5F171E1BFF28E4257D7644C4EFE583
+:10DBB000172CF8BDFB679E0D7320CEF3BA8CF7755A
+:10DBC0007FD631359EC579F471E8054EB6CE9FE615
+:10DBD000725F726115F2671F7F342C5040AE4A2E7F
+:10DBE000AC457BA6648B80F7449240EFA14912E7D5
+:10DBF000C309D0FE6CE132C0F7C406DCDF28DD6C5F
+:10DC0000F6AC12FAD3F9B4C3ADBB57BDB46B35F65D
+:10DC10004BA83D95A4D9EF3EC5F3804B2FB0FB0137
+:10DC2000892B405280EFB9DE89F0AFFEDED76E6BF4
+:10DC3000F438FBD7DC9E29B93041E73744E6F77D5D
+:10DC4000269F7C3D2FEDCA6770F5CD67C3F868F35A
+:10DC500089CC6322B6EF4E883E7E06C7F389DA325E
+:10DC600038B941CA1456AFA4E13E05F449495342BC
+:10DC7000A2A099576963852E0FA3B4A95899ABE95F
+:10DC8000374207DB6F278D88D02163AD7CDD323BC7
+:10DC9000ACF7450E278CB77161DE4FDCD01FD33F48
+:10DCA0001FCB0DE935A85FEE71463BD790E174EBD1
+:10DCB000E24AA58D9C3ED44ECED5D047A58BB1FD72
+:10DCC00089E6D2BC9F403CF909762B486CBD63A025
+:10DCD0005B4674BC4DE8C35B26E6035D1A6FDFD17B
+:10DCE000E5FDF4C31BA7AF8A17F53DB58F72005F42
+:10DCF0001320E03410FA61F4BF14BE22E372FA4F2D
+:10DD00008A3E0F5FDF3C969000B51FE65F721E0FE4
+:10DD10009280E522F350E94FAED6D1DFB776E475B5
+:10DD200020872ABDE71F7802F9773E9547D8973FAD
+:10DD3000D9709F6E7D88C01783EE2302242BEFFFDE
+:10DD40001CDD3F9603E990F71558C7D691531B1F6A
+:10DD500049D7E279B163D202A00BD934F0B2D68FA1
+:10DD6000C0644F871BD72519E361BB1D3EBF93BE1F
+:10DD70002FE37EF5F284C251D1D67DEA174E84F8A6
+:10DD8000735DEDB489106F93B9DD08BFAC05F6265D
+:10DD90005C811EED7EAD064ED7876A6B307E4D2CC2
+:10DDA00001E2D29EF725CC2EFA9AB0788BDA4E910A
+:10DDB0007D2E887F2A0229427B4EF2ADC8C8853865
+:10DDC0004652764083BFB54E66D7AD4E39E0827C71
+:10DDD0005233ED1FE2319634E9BC7E9F9295B385B4
+:10DDE000F132CC474E0A118C6766D1F71A7C2B4969
+:10DDF00014CE8BF89B92C589FB451261769A3A7FC7
+:10DE0000FA06D7B387F9BAB40CE2B849608799D05B
+:10DE10001F5ACFE394BFAC2DE27890701D3327B02A
+:10DE2000FA4A3C83DB0A716B11D6D530961D70C35C
+:10DE30008E885793E1EF8F261037FE4EDF0012AE2B
+:10DE4000C77B4C2675DD0FEFBD71BE2DC0075FA4EB
+:10DE5000767E20401CBAC87725ACBF8D6220DB4D92
+:10DE6000EBFF4AECCD867AF0FB5EEF25B2E750C8B7
+:10DE70005BF669F6A5D8BD9C6E6D5CCF581EBA44A2
+:10DE800032ECD77C73A5F67B739C7717C091F49125
+:10DE900080FB30755676AF4F9DE3B67858BF8F72D2
+:10DEA0007A21FD817F3A981D735E72C727627C33A9
+:10DEB00033E735DDF81E5D59E2FEDB26CA8F92E6B8
+:10DEC0005ED61192D704FC32B281BED7D22F4A5C03
+:10DED0002DD18ED7DF46DD8751E1A3E312C09F78B5
+:10DEE000A190ADAF063ED82330F8030EEE6F9180BF
+:10DEF00008F49CADDE172C2D6765F5F722808A1497
+:10DF00008EF7D5FD05B29C95F93EA57F2EDB8734B3
+:10DF1000C233BBFDE14E88EBCF6E4F9D07FB53B381
+:10DF2000EDA3FE0CCF3D72EF8138B003EF13F0FC90
+:10DF3000C78F7FFF9A1C479F3BDFDE88E78DCF723C
+:10DF4000B9BB8BF4E23DEC3EE2E2FBE4417C3F17DF
+:10DF50007E600ECB2119FCF439E1E08F6EA0A53B69
+:10DF60005F0BDE0066DB5D1DBDBF0135E00BB90A4E
+:10DF7000710F406DD7E639C4CAAC5D040F166E8FC1
+:10DF80005A705E91795B100FEFF7E58D07901E7D5B
+:10DF900078E2F72AA978E99B77FC6DD321CE1B4B59
+:10DFA0009FCDB667FE996D7E30B88C78FA0C3E51E5
+:10DFB0003BF233A7D71A4FF5DB474EAF0D9E959630
+:10DFC000DE746918CA8B13CAD5A26F6832C5C3D96B
+:10DFD00021BE2B07023E3A075C961EFDC0CAF40024
+:10DFE000C94DC7F9A8F7BE1F7CE0A403ECCEFA9D8B
+:10DFF000EFA6C3B34AEC5A733BC63745F487CEB796
+:10E000005E79D1F3611F40DC89AE7F23E3553E6426
+:10E01000F3BB9B9FAFB9BB350ECFD7DCBD44D4DD7E
+:10E02000DB7CF712967747A4CE31B7EAECF5E53101
+:10E03000FB813880B19F794B26938F06C03EAB6B36
+:10E0400012C6059E61FC356F8A57847CE4092B0457
+:10E050008CB78C3FEE6EEBA2E579C104FCBDA379D1
+:10E060000F2CCE817B08AA3B597C6F90B828FB67A8
+:10E07000103F39C0D671282F02F9B67BDD764DBC32
+:10E08000BF5BAEC9867BF70277DABDC03FC5B77A02
+:10E09000DFC7FB1C781C425D57773516631E6BF19A
+:10E0A0001C773ED0BD3864C5DF1F2CB610C946F5BD
+:10E0B00058B1442CF01CA410C90A4F1BB1C0336FD7
+:10E0C00019BB27BBA47126DA07CEFC2205EEBF2DB3
+:10E0D0006E7FFE73685F2A85F7B3732D0C3FC5ED25
+:10E0E00087BF02FE59E02DC2BCC3EF6C5174FEDF46
+:10E0F000E890BE7C4D9BBE9C1DD697733AF4E5AD6F
+:10E1000070C799C68E38B0D78CEB44C519764EEFE0
+:10E110001501D62688079B519E0A2ADAF3603FFA3A
+:10E12000CC8B0E137CDFF317E6F7F66EB5E27D6F4E
+:10E13000FBFF602336C82B7CC9BA11BE9FB185F2A4
+:10E14000200E47EBB3DFD92A0A8D02FFEDE5AB5570
+:10E150003F3D3806E6F5F25F599E4CEF5633FE7EA2
+:10E16000CA99DDCFBF08FB6267B65E8176D62B42C7
+:10E17000C004FD065632FA1BF9B4628BDE2FBE3F97
+:10E180009EE99B1E81E1FBCA46FDBCAF0AEACB3F7C
+:10E190008F67FED45CA2799F01FBF7EEFA14585703
+:10E1A0009F8D7EDFF0435C2E5E784151F956E4F797
+:10E1B000B311B7E6FCD29EC8FEDDBD57405E05E058
+:10E1C0006258E47D85615CB5FFA278B60F9FC4F705
+:10E1D000677A5F17113FA70DBF5BD867D7D5D6A465
+:10E1E0004ED1AC43258DFB938BC13F6ADA9F3C57E0
+:10E1F000B3BE546E3D987C07E62549F8BB4C95B3F9
+:10E200009F5B3B2109DE8B218017BE43DCAB3BF4D7
+:10E210001B27D4A3F6EE585183F7D2C6FB52A7684A
+:10E22000E4F46FE54B559E2AB97DB22BBFB310F2D3
+:10E23000C42B1AD9EF3755847E740BFCFE22696219
+:10E24000E74CF324522452F9A9DCFEA31FC2EF715C
+:10E25000F99F1EE701786817B7C2FB8A964FF03C1A
+:10E26000C12AC3EF08A8CF7D9CBEB47ED844EBAFD3
+:10E27000BACD5E06FA89F6FB1A940F646EC4FB4DA4
+:10E280009CA7589C96BE7F0F7E12E5D4E4C01B77F6
+:10E29000D0A66748E89D1B3260DE7A3EA37C2B80C7
+:10E2A000DDD5BB59C0DFB5A59656DECD60527B9754
+:10E2B00062DE2DFD7E77B4F3CE0B83FA7E8CF4FF05
+:10E2C00003E75FFA97A9E52363BD013302782EB116
+:10E2D0007209D5771A3BBFF27803DEE7681C078323
+:10E2E000709A7C03582FDD28DF56F5FE21C192C7B6
+:10E2F000F36687B332DE5B08FC4A19A5E26A32C5D1
+:10E300000DF8BE994C83E72B4278AD28323D8171E0
+:10E31000A06D71A827BA5D5DCF3D05FCD5321AE32B
+:10E320004F83F979CF6E7718EF79ECE1F1C96E1769
+:10E330002B97B75B310FE6CC5905F5E8D2D04127D2
+:10E34000D0A3FB45AB097E97F4CCF60193214FB2E5
+:10E350003BC4EEFF3D1D1A80BFFF1A6BDD32EA039E
+:10E36000759D3C06FF84F534DEFB35ACB76439CBD4
+:10E37000231D34A0263BDAEF49A8ED92949A6CF065
+:10E3800053FE17A753B28F00800000001F8B0800B8
+:10E3900000000000000BDD7D0B7854D5B5F03E7316
+:10E3A000CEBC92996466324926218F09841020E000
+:10E3B00024860814EB24040C187542D1A2B63880C8
+:10E3C0004080BC44DB46A55F2624424251428D0872
+:10E3D000087140B1F48A6DB0A8C106EF80F86AB543
+:10E3E00037DADE5EB5FDB92370295A1E23F452DBFD
+:10E3F000DBD67FADB5F799993349AABDF7B6FFF7DC
+:10E40000FDE9478FFBECC7597BADB5D75A7BADB55E
+:10E41000F744BE6EF1EC2D60F01728509C8C5DF235
+:10E42000BB3C9BA0BC4482573318333A7C465B3AD2
+:10E4300063D672C6BCF0CFF186BC5786FA53B2E7FA
+:10E440009BB6718CDDC57C0686CF72BF818D853E03
+:10E450009DD0388BB1650A0B290E782EF4BE2F4D56
+:10E46000A53263D07FD92E29D801FDEFDA6C64CCB8
+:10E47000C4E8EF33F8B7A217CAC5B1F22A16343090
+:10E4800019FE63575C3B187F95123A2AA530B6DA1D
+:10E49000C442C930EEEAA7B4FDD6B010C1D370E0D3
+:10E4A0003363FCF8303FC600B4FF64EABCBC6EDBEB
+:10E4B00034C69C0628C3BC236FEB838887FF907DFE
+:10E4C00034AF35CC4FE3DCDE5AC54EA531D67C5F88
+:10E4D0006BD65DF0BCD87A7FD65D57433DC201DF75
+:10E4E000B730DE9FC1BCF601CED654B3502EC0B7B4
+:10E4F0001CE69B5406E541293405CB26164829E342
+:10E50000EF53CBF87CBD71F0D5B31EFA5EFD2EED56
+:10E510007BF68B34C267031BA27AF6545C3DE0A302
+:10E5200041E0A1E100BC8FC3C3CC0352C07A159671
+:10E53000821D19005FD359C63641A9E9D06746CD7F
+:10E54000F8AC8731C04366126366A0D7A3125BD4D0
+:10E550005F42FD26D64D8136F8771D96DBA9DD0991
+:10E5600081BF476F5991E587765BEC50CE16089EC8
+:10E570000EDFD0E1C7A91C32C17792AE8E96A9BE3C
+:10E58000623D2FD7D98A6BB6E730B64DEFCFB201D7
+:10E590001297C9BED77480BF271DFE5B90DF96E936
+:10E5A000BC790ACE97798B7C00076BE57878ACACA8
+:10E5B00065624B490CAE187C9CBEDBA4FE900EF845
+:10E5C0002C7058F2EC7323DF46F47E4BAC5DB34DF8
+:10E5D000A279A41E0BBF3606E9FEBCC4F642BB1DE1
+:10E5E000D287AF8D817E3BE6B95907945D4027B94C
+:10E5F0000CDFB34E09F0527EA8EEEE5791CEE549FE
+:10E600009EF1F0683C5429375A68FE77FA009ECC98
+:10E61000E4963D3AA8CFBCB3B80CF91BE67DE702FF
+:10E62000787FAFCD4DDFCBB270BABBD6070AD69696
+:10E63000E0F77D77BF0ADF8B4C49F2E0F7330157F3
+:10E6400056073DBBCCD88EB54BD8EED1143E7EBA22
+:10E650004EBEB30ECB65BCEC582779F712F36DA50F
+:10E6600079671A590DC289EF8325B464BC07A93EA6
+:10E67000C8E93BBBA514C7CB1CC79F4E432807C79F
+:10E68000794BA5F760968E6520BCF0DF00CFBD0703
+:10E690002B331DD0FFAD732645970A4F176343D820
+:10E6A0004E0959183E0B8B797B93685F3A3B1317E1
+:10E6B00083334FDBEEA2DE9B7A35E025F08ECC90E3
+:10E6C0001EBFB37853EDD0EE4B063E8F443AF62191
+:10E6D0007D603ECD9F02E46971745B74C580E33553
+:10E6E0007FAAB0E0D5B1F7E7DA4C2C58142B37D419
+:10E6F0001F9B8BED1AD9D006E4ABC6FE64168CE3E3
+:10E70000F72F258DFC5D95BF9B3FD5B1401AB16FAA
+:10E710008ECF8AF8896C588EF01F91D83E86F50608
+:10E720001688FB7EF3A70E6D390A67068D136BC73B
+:10E73000B4ED067E4FEDD8F4700A7EE7822D9CE2A0
+:10E7400010F3C37ED9326B41BA5C0CEA027A58C727
+:10E7500017DCBCFE226335FD96587B75BC0B8B0C19
+:10E760002C44788FD0B8889700C8B69D839F18DC5A
+:10E77000506E183C4A7851F9211E3F8138B991D129
+:10E780003114D2C19AFE856D5557891948714C5D77
+:10E79000BF6BBABCB3A05ED669D6737279747D9331
+:10E7A000587954270B79D0D0553D2BBECCDBC7FA16
+:10E7B00037D654C3FA2F2FE1FD4FD89ADE58AFC495
+:10E7C000E411CC230FF1122D9B12CA16284F892B6E
+:10E7D000DB12EA9D09F5AE84720E6F7FCE1ACA93E2
+:10E7E0003D8C7D645B5BA3807C3997155A2C417905
+:10E7F00073C7BD35D520E71ACB87BC32CACF41C914
+:10E8000023B118FE9A3CCC1B04FC593C61C3B212E4
+:10E81000C4C3D06BB8FE1B06249B047C6EE93F1872
+:10E82000A232F673C7F5EB97A85F43FF87D46FD486
+:10E83000F18B75B48E37159FA4768000DB69A0D369
+:10E840005799C45201A5058AFF8FA8BF1AFB7FC341
+:10E85000F52E8B18F8FCB81CBC90E57D85E4E01122
+:10E86000C986EB2ECA7738AE25C6EF6AFB5F4D1915
+:10E87000FC571C26F9DE4FDA1568FF7F1A7F338DAF
+:10E8800001A97E854D66A05C0D4E447DBC93F927A1
+:10E89000A21EFA7AE3F8A33A6877421FDECD005F42
+:10E8A000C5F64D350AB43B610DE74A2043266DEDB0
+:10E8B000E5E5F4F06EC46760EBA384DF13B9E15CB7
+:10E8C0001D94A7DA43BC3C3EBC1BCBB76E7D86973C
+:10E8D000A7847365E83F3670A0A61ACAFB6C23AF05
+:10E8E000D77C3B97E32A7C97C779B3EDE9C8765C80
+:10E8F0004FECD603C6401E2E5EFDF1B3FB000F8B1E
+:10E90000EF4F2639B5EFDC57E6FB68FE019F520159
+:10E91000F290B33ED763248F15B203B250773962B9
+:10E92000F4B0E60DB949CE4F6A3988FA3E737109E1
+:10E93000C9F94F53BDEDF669B1E72719F00438DA8C
+:10E94000ED362E97659D97DA3F6025BB678B99CF93
+:10E9500007D60DD1D722E8512EE6536ED7D133CF4B
+:10E960003687C6FB40F2EE30C9F8640133D27355E6
+:10E9700012D91977EC01B90072B957C0DDBB7562C5
+:10E980003000E3DF21311FCA8D5EBB370BE5C30BBF
+:10E990007F91EFC4F9F69642199E3F16F2BEB7CEAC
+:10E9A0009B658FD38BBD7B78BD2A777A0B787F559B
+:10E9B000DF6476F0EF646E99B817E791AC302F966C
+:10E9C000972F2ADADB4E7A7B01CD9B79BD5912CC89
+:10E9D000F7F4AAB13AB42355FAA4157A6FC2F9DC58
+:10E9E0008EE35B627452BFDF8EF346BD2F83DE87FA
+:10E9F000F93EE0F0D3FCC10E984A76A0B003DA717C
+:10EA0000BED362F8654A781ABEFFFF084FF760FD73
+:10EA1000FF144F23C88B00B66B6C0579A18B93173D
+:10EA2000027FDBA4903E93CB0B0FEA397CBF00E45E
+:10EA3000E3ED36FF468447FDFEE2071AC9EE53E1D7
+:10EA40004AFED68B355F65C3D759A25D76E203D304
+:10EA500066067AEC84A19FE4E289F9CCD38EF24376
+:10EA6000C7EA118FAA5D5971FF9AB718D8B397ED0D
+:10EA700032D1B95BF266E1BCBA81AE26D4C37586E9
+:10EA8000E0BE82985EECB50777AC40BADE52E20990
+:10EA9000B8493FD27A0BB42653BB5E7B9829583FC6
+:10EAA000C36D034890CE448FC86D86E05E09E9CD02
+:10EAB000F9A577D5A4604022BA07A8FF6D9C7F7A9C
+:10EAC000EB18D9F7BDB7B9886FCC2C68467846E308
+:10EAD000838C0E467CC414EFD43A6B0C0F3F13EBBF
+:10EAE0003AB93CFCFCBFA11DB9D94C7624EA4CDCF8
+:10EAF00077B19E4C8217E8F902F187BA5F7A242B2E
+:10EB0000B889F6679E0AA4C746AB7709C1FFED64D2
+:10EB100037C2BFCBCCBA4C65B8FD609D24EF043C36
+:10EB2000ACE73186F6D99DC23EFBF7FA4B56B403EB
+:10EB30005EB573FB0A19C504F26F29E3F54BD725BF
+:10EB40007F88FB99A5EBE49011F62BAC6B8E371CFC
+:10EB5000B7CF208E82F1FC425EB2ED112BF28D1FF9
+:10EB6000FBA5E0F87FB4BA2D5886FE5391ECD0BFD8
+:10EB700038D6FF3DB16E17CB1C7ED696EC46FC26F0
+:10EB8000CAF5F754F87A1EF3C67F4FFD4EE2B8B0CF
+:10EB90008F7B1FF105780FA5A23DFF6D99E89A08BC
+:10EBA000AFD31079C80CF58BDB64FB7AC0A7BFD557
+:10EBB0004AF355E1BD3333722DEDAF12C63F93DCFE
+:10EBC00054A1E0FCC5FE83ADD3EEBF1833C4CAC068
+:10EBD00017CB5984F631C3DE8B7D6BE2BE8FB1BF9C
+:10EBE00018E3DBA9EB85B9A504F8055FB92505E9AC
+:10EBF000E69738DDA2F44E805BC5A7EC18199F4E4E
+:10EC0000433817E595BFD5487848ECAFEABDC7CC87
+:10EC1000B03E80AFB64B12F1E3F6FB92498F311351
+:10EC2000A763F3EA2437F2E74E43E4695A372F1912
+:10EC300019D2F5A239F202C9A342EE37B8F83379F6
+:10EC40000FB6BB90CEF9FAC2613DAD270E0CD83B92
+:10EC50003F93F752BDC4C7BDD09EECC6F5D88C9883
+:10EC600084EF3707FEAB8D01FE4EE9F83EB87940E0
+:10EC7000BBDFBD00FFEACB6272E122E3DF090C706B
+:10EC80003900335D45DFB923896D82719B7492171A
+:10EC9000EDA3A6D593821D9C5F4CB85E1A04484D27
+:10ECA0003AD8F795C5D67793EE6411EE9B1A4C9B34
+:10ECB00087E414AA3F8EFB2D86FB25E8B71A3B1587
+:10ECC0000CE7E7A6CDBFFD33C2DD74484BF78618CD
+:10ECD0007F489F49D83F8E5F0A627C40F635CA87DD
+:10ECE0006A161C2F713F0C96936B8682E887691613
+:10ECF000FE89F463E1B9C81FD6F27EB6149ECD67D3
+:10ED0000B97D317370CF2BB8CFB5D70CE5E2349B0A
+:10ED10005BD75E7DFAEA187D5538670C6E9571FFFA
+:10ED2000A6DA2571FBC7890BA6C43FD7533FDC8FFA
+:10ED3000E2F7C2F80AD785C2F5D936A1CF40EF91E4
+:10ED4000DC5DDE3381F41EEA25945FEA7E16E51968
+:10ED5000CA8F271D558B1C30CF92B4AAAF38A6F1AD
+:10ED6000EF901D8F9BA019C3F199A857D476B8AF27
+:10ED70006DB18CDE2EEAE7D991CAE583225179C5BF
+:10ED80004FF57B36117C0AF1CBDADD05246F557F18
+:10ED90004C83F043AD10FE9B15C27FB372BB91B99B
+:10EDA000E3FD55416DB941ACF74616E67EACFD502A
+:10EDB0001FEFB7A966212BD6A3FF069FFDDAFECD74
+:10EDC0002C385B41FA0E7C668C7FCF7AF97CEF148D
+:10EDD00074DF61E67E9B99EBF6C8DC19C5E79B5AA8
+:10EDE000E62D7810F5C49B7AF22FFC87A0938A1742
+:10EDF000A3A3EAEB88EF24DC8F61BB078D8497D354
+:10EE0000A08F0F0ABFC602DC67B6F9B30A0B113D2B
+:10EE1000B6BC05D6E1F8DDF492B91EF965B343A797
+:10EE2000E1A72A879ECAE4EF41BCB727935D0D682E
+:10EE30009E8A7C543156D5936C2AFA993ED483BD70
+:10EE400005E5A65B2D7E1C2F8C7601947708F9B51D
+:10EE5000C361A0F1D472741F27F805BE43E3A1DF9C
+:10EE6000C517C707C168FBADC25EE47261DBAA24A7
+:10EE7000924731BED531E2DB129F01FD452F0939A2
+:10EE8000F2122094F651FD662E47142E9F5E3A3BF7
+:10EE900089E4DE1B1FAF26B972695112334AD4DEF2
+:10EEA0002B61FDF3C6E07A28DF25FCA82F49DC0E94
+:10EEB0000C1CB1D2380D06FF0EF42B343C37DE03A8
+:10EEC00014632F1882DF7F1AEB5F3693DFAA218548
+:10EED000C3D9F0D21892933FD6079FF901F9218C3C
+:10EEE000649F3524B953A9FE27690CEBBB92FD83BF
+:10EEF00048CF6C23B71B1B0CA1223BE0F16490DBD5
+:10EF0000BF2751D0E0F88356B26B00CC2CFCFEA991
+:10EF1000EE4CCF26770C2FA71E9A4CFCBF4DCFE9A5
+:10EF20001638CCFD9A27F5BEB959503EF97CA90791
+:10EF3000768EECA2CF1032008CCD5BB8BDB64CE71C
+:10EF4000EE6B45D9F472B247B3DF7C78652DD637C6
+:10EF5000AF5E7713CAC1D1D633CAF3787FED0516F9
+:10EF6000C9A3FD66FDD8FE107CF7C2E0440FA94797
+:10EF7000E60262039FD878DBD37AC037F2D7113D1F
+:10EF8000F1EF171D1FE78BFB3FD42FF89D6690BF55
+:10EF9000513F32C9DFB8B23C5299D3B3F9A54C61A5
+:10EFA0009F69EBEF48F55F40B9D6F4DDDF9F682538
+:10EFB000FC4648FEB11EEE1F3FADF72E463EB5574C
+:10EFC000870C4BE3F6B78634BE8E9619855E6721B3
+:10EFD00043FCBA53EB2BAAB47CAE3EF5697C1F69A7
+:10EFE0001DE2727C78BD4EAC9BAF18516F71D70D8E
+:10EFF000ECA7CF727F8621CD4DF533CF860CCBA009
+:10F000009CBF2E6458219EB82E00DF2113CCFBF448
+:10F010000E2B5FCF80061C67C57446F6C80A19EC34
+:10F02000D0327CEF1E08035DCE3C6FE7FCF527C0B5
+:10F030000AE07B0913ED8C60B782DC7AB1530AA138
+:10F040005DBF64BB71AFB900D7B157B6223D774BF6
+:10F0500024B796745616ED80F2EA435388FE29D3FE
+:10F06000395FAE0EDA49FFCD147270993168203BDA
+:10F07000FA19EEA783F1C91E6E804E5965C3F1805F
+:10F08000F25BC30F416D9C6166BF90A7FBE3E20B8F
+:10F0900063E3E47A7F427FB0E3B4FC1150F50E974E
+:10F0A00073CC9D89724E95C34687AF348DE452610F
+:10F0B00026D217E8C9E5E44189F0DAC85AB8DE106B
+:10F0C000F23EFA5DA12FCEC801AE978C5BE93937CD
+:10F0D000AD80E8B61AF50DF9CDF9FE6E343E989B79
+:10F0E000A6137271643EB85EF041C35916BA16BEDB
+:10F0F000D7B08E851AA7F2A7752AE941AE0F4D2227
+:10F100009E61E2F18ECFD38B897A7098DE4BD077F7
+:10F110009906A1DF049DE3FDD9A8EF67AE0BCAE80D
+:10F12000D7CCB379AFCD4C8FD92FCDEF994CEEAB77
+:10F13000B0EC63632DE89FA97CC685FE5DD88FE3A4
+:10F14000BA4A06BCEC81F7BB55FBD6C5E7EB32707B
+:10F15000FED52B3E566A41BA0CD17E3592CE6CC894
+:10F160008F2A3E775BA15F19F6E3EB2DDADFC43A15
+:10F1700093E2FA57BD6426B97AE5B0356824BBC37B
+:10F180009F6F87F1327E65243BF4C24B56D29F17A6
+:10F1900084FE73AAFB7EB681E8D38A744D476EAABB
+:10F1A0001A83FE5326CD1F832250B5C31AEDA3F94F
+:10F1B000B3457DC1D0AD9CAF8CB45FBC620F7F13F3
+:10F1C000CB000F43FBBA05E98CFEF643B34B1F801F
+:10F1D000F7CD3E8B8763DF5F8AFC6A94EFBD15FD38
+:10F1E0002A73E57591FB601E8DB9169B11BA54E721
+:10F1F000FFFA97B741F9A3437A66443AEF9BBD887B
+:10F200008D1D5DFEAE0AEA4F86E3D6CB9AFDDA721B
+:10F2100063BFB6DCCC9493E13879FC589AD5796613
+:10F2200032C90ECF67C0DF4663CBD93D00AFF1C70F
+:10F2300046D2470D69FE5D69E837D5455E433C1B04
+:10F24000F3CF4D453F4555FE9F28AE73E5DBCC839C
+:10F25000705F315792FEBEB2C3EC0EC4C9AF66C137
+:10F26000FFBD79B554DFBBD3E896787DEDB40AB421
+:10F2700007E9DBF867D201FE9BB7CFFB88F64D6844
+:10F28000B543B917ED4BECF79C146C47FB713BD7BA
+:10F290007BE7C17E34A1FE14EBA9591E9C6B82FF53
+:10F2A000EC75D44C44F9A2FC59F121FD37E25071C0
+:10F2B000F6EEE1E8FAE47E9C1BD08F338EFC3887B3
+:10F2C000516E349AC2864A18E7BA3FFF8EE4F2CAFA
+:10F2D000D6A564D7C7EC5C23C99195F7F9E9FD2B56
+:10F2E0003BAEA7799D8179237ECEECE6FBB99539BB
+:10F2F0009620C2779D9DDBBF2BA19F240DC74B227B
+:10F300001E7EB3EB7A17D2FB378C7F2FD0CFED84E4
+:10F31000DFD8865248FEB85B52D0CE6BDE7EFD470A
+:10F3200028B756EE963DA8C7D9112BF93D56EE9E4B
+:10F330003371B905C7B99C568978EB9B6393E9BDD6
+:10F34000EC0B72FFC9D075F05EE9BBC68DEBE4F83B
+:10F350006E2387CF6E7A1AE1BFEECF32F1BDA26382
+:10F360007EB4577B0DDE89B8DEDCBBF6CD45BCFE36
+:10F37000A62E5B47ED9F95980DF1606FCDC0F72BE2
+:10F3800025C587EBAB7EFBAADA787BA4334D267CC0
+:10F3900057E6AFCB085B88DF6F453DD7B85B4F764C
+:10F3A000DDF1051FFCF236678CDF57CA3DB7CE8C06
+:10F3B000B3379A77DD28F8013436E069A5C0933178
+:10F3C0007F5D117EF7F3F87FE5FA96221E8FF9EB49
+:10F3D000EB20BABE77F1F5F007D0F7B45FCF7168D4
+:10F3E000ECFBD1F641AABFD9E461DE7D168A1B7A17
+:10F3F000719F9BE754A83ECFC9ED6CE50F6BF7BF3B
+:10F400000DF0F7A7F98D4E789FCFBCA5485777C46C
+:10F410005605E6244E89EC1FB6CBC8ED4985FBDDC9
+:10F42000B6A5B3A737C5C1998DE3A5D3FAB43961A1
+:10F43000DC0BEFFFE935C45F53DEB9A93C9EF63B18
+:10F440008A4F590679DCD2E2F131E48BE6C13A7693
+:10F4500057494C1E367BB8BC4E9CD77227DF6734A9
+:10F460003B23344E753A5F67AABF77676B12F9F595
+:10F47000763A8366BEBF0D3094E73795CB3CDE22EB
+:10F48000EC129FF09399BCAF308CC7308FEC190F02
+:10F49000E521EFA9CE3428BF5D3EC72343D9E27DE5
+:10F4A000B26B2CCEDBA317F5E3C85FF8D6AC4AB23B
+:10F4B0004F6EF2CAF45D569F42FBF521EFCF9D7768
+:10F4C000C1776F66DEB4D3F08D1A50D648C721FCE1
+:10F4D00036DA018ABFDC19E75FBDD1332FED74BC8A
+:10F4E000BEF472FD8FFBF17E113718090F25699567
+:10F4F0003311BFD77D99D3E1E367F9FEE36333F7B7
+:10F5000063ABED3EB6723D53EB94841DD89F87727A
+:10F510003E5AFE5AB1260EEC34F4E7E13AFBADA4B4
+:10F520001D6775978EE2B3ABBA18C5633FFEFE8BBD
+:10F5300079286F3FDAF762DED238F812FBA9CF5B89
+:10F540009D5ABF94EA87748AB8F4528F91FBFB46A8
+:10F55000F143AAEDD976BE1FBB08D21DF94EED7757
+:10F56000B13EC98B76E545662279B67450F835BD53
+:10F57000DE4227EE1FD4FE09E36F41FE01B8A4016D
+:10F5800089F6E7C9251192AFAB4CBED7C6B8312F6B
+:10F59000C54BF499877494905FBD069CB722F679A9
+:10F5A00046C5D788F45CDEA3A56396D326E2944EC5
+:10F5B000A2BBA1C9A2A07EC8E810F2FA1B3ADABF2A
+:10F5C00018B25D16944BD715257562DCDD9994321F
+:10F5D00015FDE6B9D9C5D43E50C5F93A90C1C86FFA
+:10F5E00095C55A2492B736EEE7CE99CE6C98E7F1DE
+:10F5F000A293DB832EE6D92E933DD82F91BF5FCC0B
+:10F600005F95EBC82F28E73E964CC42FD2A044F656
+:10F610009DACEB5F8CE38EC63FBD09FCD3FB0FE6D0
+:10F620009F3EF57BC3F8C74F71BAA52ED3C8FC2304
+:10F63000FCAA5FB8FD6871C26F98543FB384F3AD04
+:10F6400015E3D59A2C21792AC98773F1FED45D6020
+:10F6500067E27E448D2B8EE958E2E676FA5018F781
+:10F66000E5C9D79848CF7D47375480F67C629C1116
+:10F67000286B47798F3286FC8AAD55BED36971FA03
+:10F68000FE08DF3734DDE7A5F7B307B97E6F2E3408
+:10F6900090DDD93C200590CE4D3E43D0544071952D
+:10F6A00025A4B71F32BB799CC4DD4E71926FBB7924
+:10F6B0001C25EA470DF73D80FC566F21BF4362BC15
+:10F6C000E585BFC8FCFBE3197DBFB794C7777AE730
+:10F6D000B9C9AF911847635DDAF5ABC6512E5A012F
+:10F6E00031F0BDA59BCD44876C99E399A59AB87E6E
+:10F6F000192E07C85F9B315D1046C43BA2EB1A244C
+:10F700000396B345BD1A9FB196F80AD0C2BD3DED30
+:10F71000B93793D2FF967C86D6EFFCD57C8680B134
+:10F7200016F3194C683D8B7A041BF4AD5AF69ADD3A
+:10F7300018BF89D52B60379A0624F1BDE76F98531F
+:10F74000087890D4EFAFDFE4B550BC58F3BD78F83B
+:10F750009484F1F530BEC52DDA070ECC9BA3505C26
+:10F7600052D47FD68DF91B5BF4DAF108A5A23F16BF
+:10F77000D4EF1DCF9CFB9DCD3931BD0F7680297D07
+:10F780005A4CFF6FFCA0B6E72AF856B2EDB201F56D
+:10F79000AAAAC79B9D3CBF2171BD3AD2F97A05FB4D
+:10F7A000D5914E7283DBB5B5223E09F6EC5C5C5A0E
+:10F7B000CDEB7C0CE393602F64A4631EC3FBE7CE08
+:10F7C0001C45FA2DF898ECF9E64F15EE7701BB03CE
+:10F7D000ED7393E07336A0277DABF2C16A217F7A87
+:10F7E000EDA0EF915F8F48D302C4172D79B7000DBC
+:10F7F000EE4FF7BA697CB1EF4A8477463AF7933413
+:10F800001757ED28C2F19F9218EAFB4DC52733D058
+:10F810002E691EFC3063795CBF55038F121E56EDB6
+:10F82000D78F38FF19E9DCBE6C3AFC3CF9073F0E74
+:10F830004AB496EB9560F74C28D7D7EBD04263E5F6
+:10F84000C125B791BF7F91818D87F9E50B7DD4BC30
+:10F85000FF2B8199B83F837F12BCDAE95B417A6F55
+:10F86000E7229305E30ECDC54BEF263CD892BC882A
+:10F87000874DC55559F89DA6BAB9368A13807D853E
+:10F88000F54DF7DD4E7E1315AE4D03FA1AB4BB2AC3
+:10F89000C0CEFA11C09DEB985FE381F537463E5824
+:10F8A0007A8F05E3C223CBDF7FC9E0F4EC947C813F
+:10F8B0009BCBC94FC8E2FD7EF903DC9EAB4B37689A
+:10F8C000FCC275E9DCCE9C15189A8DBCF7B2124EBD
+:10F8D00046BBB799793FC1FD25F359DCFB884E5CE7
+:10F8E0008E38DBDCE43F3239C3DFB90AEB6729B479
+:10F8F0007F604AF811FCEE856EA7671313FC8BE559
+:10F90000FB4A822847FF39DDBF18F9AC42D88F1770
+:10F910000E5F5F8A7E36D53EEADE630E621CB0DB88
+:10F92000EAFE6E0DCAC13F283CEE6D8A0CCD467AC8
+:10F93000FCD141E3769B83DD48FFC0563DD51FB621
+:10F94000FA5721DF9CADAB29A2BC1B4BA008E3BC3E
+:10F950007A670F433B01B60BE44F30397D0CE3A1CE
+:10F96000B3034B1409E57C82DD315BE48F92F084B4
+:10F97000F755428C8D072E3863A225D0F9595ACC01
+:10F980000E79E34F0B157CA9DA273A138F67552FB1
+:10F990004A6232F2FD86C86B3AF45F3B87C87E6DDF
+:10F9A000EC97E83B8DC5CF513ED81A917714CDFF27
+:10F9B00051C2940FB53E3D59E8F14ECEEF6C88F63A
+:10F9C000CBEC00A7276361CA938AED23DAA99D3A9D
+:10F9D0009E41F8DD1B85DF053418D53F94AEDA076C
+:10F9E000EBC553CDEBE2DFDD260D7965C46BA9A431
+:10F9F000F117ABCFA7D2B97D987A2C3217D76FE425
+:10FA0000B09AA7C9F330774C9BE441D369589EE67E
+:10FA1000C02773916FC0D0A6F5DA34F0C5F234BFB9
+:10FA20002FF60DFFEB799A1EC9BB179E3F4AB7739D
+:10FA3000BF959AA7E9E1F853E36C89F99917B242A7
+:10FA40000ACFB70AF7ED43FE1C30521E57EDC0EB4C
+:10FA5000EFA17EAC35B17E8C4326DA196DB6AF0CC2
+:10FA600022DF5F3C7FA6EF418679BA2F78285F239B
+:10FA7000C17E48DC27ECC52659A3DB7BEF46E9C9EC
+:10FA8000EDBD68F97FDDDEE3F67C601FCF0F50E54A
+:10FA900079B3D89F5DACBF94827AE644149E843CCF
+:10FAA00086A7441EC3E0C8790C8AC807027B3D4084
+:10FAB0007C7290C775DE783A99E4C7259BB217ED42
+:10FAC000A5F3D6C83711598AB0933A8F18DD282F7D
+:10FAD00040DE91FC0E1CD4F3380DC66D308EF3F26F
+:10FAE0004411C711F1A29792C96E694871A7627F4C
+:10FAF000354EF363A16F1A92787CA62BD97F397D9E
+:10FB000084B8CD1E617FED81A16C38DE7B4611C7C4
+:10FB1000060181FB9D877279DC41C46D2E8AB8CDC8
+:10FB2000A9625DC8C0FD10E4A77277292C0BEADD3D
+:10FB3000EF99836EEECF32E940EF2F53E3362F7308
+:10FB40003FD532119F39B5602EE5072DC7FC7719D7
+:10FB5000FD18DCCF1CCDC767361DCE670D888B9D89
+:10FB600028620280F56BE0B5A493D09E707742992D
+:10FB70008C656F4F0D7C7769A78EF623CBBAB4FEE8
+:10FB8000F22B9BEEAE41FDBDB193C71F035D12E9A1
+:10FB9000EF65CCEB427B43E587828C34A273A053A4
+:10FBA000E7C5EFCCC8E0FE04407D90E6279E9D7A35
+:10FBB000E1671770B4335D089F3A893F37DA949A4A
+:10FBC00011F5B218AF53DF62AA443B3657477EDEC9
+:10FBD0002B06EF22F2933A8A886E9DD696AE1A5E75
+:10FBE0004F6BE58A39E2A3FA6B156EE831B703E58E
+:10FBF00064668688DF24CC77798FB69C187F581589
+:10FC0000D4969731FF842C3C87B05FFB3E3383CB87
+:10FC1000A92B9B0A849FDF437EFE4EBDFBDD029431
+:10FC200053DD0AC9C9F61C8E2F5D2E7F8EB5572F66
+:10FC300022FBC00E7605C1CBE11F7BAD53427DD9BF
+:10FC400069E77CF93F853B11DECA8C226E27A071E3
+:10FC500087EBA85B0A727C71B8BFA8BF626986F0A7
+:10FC60001708F9132DFFEFEF37393F76CB62BDD977
+:10FC700048FE2C15F1C65392E7E910BEB7805D002F
+:10FC8000702FEB96CBD03E99FD150BCDA3E9657394
+:10FC9000D008F58DEBC279B88E9AAAC2452D23E023
+:10FCA00015A15554B905ED963A617F80EBB64B1B13
+:10FCB000871A1E57F47E2B231DF721A70EBE8EF444
+:10FCC0003E6826BD04FF75D488FE8EC305642F4DA3
+:10FCD0004DF5B765A03E4F0AF57DAF00ED136E1FE1
+:10FCE000350E1AF7A0FDB7B4537B6E866DD6C6B934
+:10FCF000589783FC19AC57FB1ECFA768FA0D8B7B76
+:10FD0000713DBFCDE09F8876DD755FE6F1F5F3AB21
+:10FD1000740CE9BB4CF6AC403972DEACB5BBCF5BC2
+:10FD200039BDFAA274F614219DFB46A5B3A708E9D4
+:10FD3000BC4CC7FCF1E334229DAFC6EC734EE7F335
+:10FD4000CF5F5384743E77F09A22A4F3367D8F17E9
+:10FD5000D7CD930EFF5EC4CFE9393EB29BD4BCC968
+:10FD60002FCA8F8732B4FA305AFE3BF93F46D3830D
+:10FD7000A1281C5A3DE834B873501E2E3519FFAA2D
+:10FD80003EC4BF11FD692623F9235EFED3E58751EA
+:10FD9000BF050665B23FD4F15E56FCE3D05FF0F2DA
+:10FDA0007B2E4F401A7DFC066157B94C2C807E0F8C
+:10FDB000D5DE57EDC64479FC0B319FD319DE1AB45A
+:10FDC000B355FF6CBD18D314BCCCEDD3A724F2BF40
+:10FDD0009ADCFD3C7FFEC8121BFA67CF06B93FB61E
+:10FDE000E9F952F2D7AE0ABE12C2FC273628D97002
+:10FDF000DFB0EAA90F53309E0DFBD0531971F19576
+:10FE000039621F7A36782A05E3DEF0FD6AFC7EB29D
+:10FE1000336240FE6D82FD1934614D4A84CE0D354A
+:10FE20003919E9FBF201ED7E4D8D4FEEF41948DEF4
+:10FE3000ED1C9482B83FCB30F80B72503FB11CDB05
+:10FE400099E4D87AF924C36BCB9C161F17F65ECEC3
+:10FE500088CB570AEF48253E0CEB9997EC801D564E
+:10FE6000219778BCE63F77D9833C7F89B7FFCF6085
+:10FE70000195557DBD429CC35B21CEE1A1FC0E25C1
+:10FE8000C8EFF87234DEAC9E3703791E1A29FE1DC6
+:10FE900097B714DFBF8945447EDE6746CDB8D17C75
+:10FEA0009D965237C0BDE66B163A67D80C7CDD5A7A
+:10FEB00016E3C3063115950F9B845FB7B9FE24ED99
+:10FEC000039AF17C05DA551ECE870DB03FC2FCCDFA
+:10FED000C475CBFAB5F98CA3ADE329995ABD122D9F
+:10FEE000FF83FC98D333B5EB579DBFEA078FCE73E2
+:10FEF00050E2EB2B615E89FBCA44FFB5BA2FFCA22E
+:10FF000072EDE64CAD5C8B96FFC172ED8ECCD1E408
+:10FF10009A363EF037CBB5C4384121F77F639C0059
+:10FF2000E3B6FFD338C147EE9E0C1DCFC3D7C44FF5
+:10FF3000BBA4969B4CE330AEC8E3CB8D5623C56182
+:10FF400013E3AACDEEB9228E38F4CB19A8370FE906
+:10FF500019EAF37ACB4A8A5736CB070C78A4705843
+:10FF60003C51394A76FBDF1A575F9F198DAB1760FA
+:10FF70005CFD15CBE5347F1C3DAB4AC0C02F193D5D
+:10FF8000DF68B3A053B2C88B302901668FEB3F5AAC
+:10FF9000BFDE4C6E27BF22F2635C069EC7BEC50A59
+:10FFA000FB3098BF4BC7F377EE4FF76D43F968729C
+:10FFB00073FC3E71F8AB0CCF1D3DA1EF27391268E1
+:10FFC000B478501EAA7E17757C45F80FBE28DFFF57
+:10FFD0002081EF7FF077E6FB447C0CA872E76F8D01
+:10FFE000876D07DC68D607A3B8D75B18CF2918CE72
+:10FFF000C7A38D331A3FFF34D3F75A26C947EF54AE
+:020000022000DC
+:10000000CACBFD82F226B93C720AFD3BEC90D18D41
+:10001000FB0D933897C13667893C4A4F451DE51360
+:10002000F3730DEAF98FD1ECC20FA3729ADB851F2F
+:100030008E2AA7FF7B76E1030EDF299CE7E94A6F52
+:1000400011EACD8D56801FF77BDF378E78CE423D8B
+:100050000F00FCC4CF9B3CCBE3E0897CF58704FD1B
+:10006000F287BFB37E194D9EEA5D2A1C7F67795ADD
+:10007000FFC714F47B8E3E4E80E0A8A81AF28AB81F
+:1000800015C3B8913A8FE6219E7F9621F2AAD4F744
+:10009000116117DEE9F266BAA0FFB9F74D26960A9C
+:1000A0002610F218DA633E0BC5039AFA799E48D3FC
+:1000B0003A46715FF51C65D3401D43BBAF3FCD5F32
+:1000C0008079601B3FB004E454F4932F6068EF5DC7
+:1000D000789F971BD2FCE3294F6C5D581377A8F8E3
+:1000E000ECF206F46700BCE41F708AFC4C15BE3AC3
+:1000F000179767EAF32681EFE8BC9C1C4ED62F07C2
+:10010000D14E4C760F911FA9E91037DE2A642FF9E2
+:10011000EBD91A079D9F683A54594AE7CDFBCDA504
+:1001200068E756FCAAD686FE8973D73A29CF204FB6
+:100130000EAF423BEB9FD3FDB3105E6B79701EDABE
+:10014000A9F960A7A2DD7BEEE0BC527F9CBF7B1BC0
+:10015000FABB61DC6D56AD3F9B99789E78FD5E9E43
+:10016000077CD8EA9F8BF8DD66E6F006B68ABC67A6
+:10017000E1E74E5CFFEABA8F9E73BCC344716955D8
+:100180002E6CD3333FEA3D559E94883C39C007CF4F
+:10019000D31BACE3F91EA26C716AF3154F67CC292F
+:1001A00041784AD0D13B0DEF518848E8775F2EE285
+:1001B000F0D78B7C0A357FCAA8F8BE8EEDD9BA9AE3
+:1001C00058FC7D2CF617F177912793FC29B79FC730
+:1001D000DA0CC43756585FE41F01BE41FACC8A0CD2
+:1001E000CDC6F34485BDA15988CF973FD5113E9424
+:1001F000BAB7287E928A648371C66D0E774F403FEE
+:100200008AED17D7225DDC3DB62A445D7F9AAF9117
+:10021000E0505A8A715F59F5AF7A9E07782499FCAD
+:1002200003BD790D940778E103E388E746D467803E
+:10023000ADA7BCBFB1033F273FBEF59034623E6718
+:1002400097CBC2CF0D078628BF8CCD72123E942368
+:10025000BFA2B8AFD2AD9007A353EFD5E139A84004
+:100260003B23FFE5F85E9B0EE9922FF24B2EBEFC7E
+:100270005F53FDB44F51FDF6419E0FA40F6FC07D3B
+:1002800097D21EFE32AC60D678C8AE6B2AC1F1227E
+:100290004D3CAF3D99219FE40F8C5BFF2528E7770C
+:1002A000D99884F2E7A535F9E42F85798E1F619EF0
+:1002B00077BB78FE8E722459877A4BD9CA28FF50B3
+:1002C000B1675411DC8F4219C65923F8468D470295
+:1002D000B82ED44777BAFCBB11CFD17332AD49FCED
+:1002E0009C8C3877696DFDE0593C7FD267E0E70C64
+:1002F0008FBD3C7901F9EDBA1509E970C5BE24DF5F
+:1003000006EFF78B756B558698CD128FFF63946F50
+:1003100039F608CF4B53F49C4F946EE71EF40B7ED6
+:100320009AEAA7BCD26B3B4332C5B36CA71FA97135
+:10033000C7ED6BB6733DD2B49FEFA713F7319FA7FC
+:100340003F8EBAB47649B4FC0FB24BDE4AD01B7F65
+:10035000F3FE8469F77589F649E23E6E98DD9D30BB
+:10036000DE68768A9AD75115FB0EF1C32B56D50E4F
+:100370000A68F25EAA2CE2DC9B493BFE53224F47FF
+:10038000CD83C9E870B7635E79E4DB8CFC6C6A3EB0
+:100390004EA08AEF1B023A139D8773B11ECAC31980
+:1003A000C3429244F67F98CE7566623E0EF47BDFC0
+:1003B0003596E0DECD3C5D32C943B784709B318F0A
+:1003C00083F236833B56E0776EB1D077CC98C77115
+:1003D0003586E2BD3B507ECEAEE771886CD0B7C8A3
+:1003E000B7D9859C0FCD8B783E879AAFA1E657A8E9
+:1003F00078A812F8CD9EB0A200F707DD92FFFBEAC5
+:1004000079DAF873D2D1F3D1ABC6D27993E8F9B9DE
+:100410004226EABFD839E9447CAAF91D5536BF2DDA
+:100420002B7DF87959953FE2E84670ED3CC2EDF539
+:10043000AA7A03C17F71D57CF2235E5CA563B86E96
+:10044000AA068D9CDF12BEB7337A0F46D04CF75DFB
+:1004500008BA7F9EBD0AF42C463FEDB1B69AAB4F69
+:10046000036E8FB7F9E879D12CF5CB57D179C6C592
+:1004700028992E67EDACC57B0A2E5A237978CFC117
+:10048000E5EC076FA4727AE4049653761EBA11EF76
+:100490003DB8383ED287F71E14EEACE4F5C883D9D8
+:1004A0008C5D9555716380E6CDFD4EB363E7B3CBAC
+:1004B000113F8D2CBC6188FC3B3C7F1FF3FD900EEF
+:1004C0002E8B81EC1997C8B364D522EF12233050DC
+:1004D000EEC82AA578B585B90F0D617D0E3F2704BA
+:1004E000F5C4BF1DE3B95FD824E8CA72543F52383F
+:1004F00080F2A9A3C04EFDA372F49031C8FD59FC4F
+:10050000FBEF3C3F85E24B6AFE2863B6DC8553284F
+:10051000DF445356EF37608A2D17ED850EBDB04B83
+:1005200045392DD55F97156717BD33E75B25B80EA5
+:10053000CEBFF04021CAA5EB0D60B78F20877E9D0E
+:10054000CDE5D045BDA54B023BEDE729FEDB719C17
+:10055000F79217CFB5C3BC16A5551AEC086FE0FB90
+:1005600032CAC574416FFB420E9FBDDA272D8771D9
+:100570003BCCB07EA17FBA5FF1529EBD7FA1740BD0
+:10058000C0DD2171790B9D52695F52EC4EC5FCE5CF
+:1005900006715E5216EB7E46FF5619EDE977DB06D3
+:1005A000662A8531F87E2EE2CB3F2F6077D68DB05C
+:1005B000DF6DCDE2727B81EC9E827CB4411A78AB18
+:1005C000360BDFBBE9FD9C94D672CC3BBE3EB9A591
+:1005D0001CF5CFB0F7A9F0BE24AE6CE4ED1A4C9137
+:1005E0003C3C9FEC4DF6AFCBC2B8D0920F296EF9D0
+:1005F000CDEC774E60DEC13BFA9ED929A85F0AC4D4
+:10060000B97EE1377C6D82EA3734F1F264EE378CE3
+:10061000E6734DE1F964B50BF939C55A91AF30D79E
+:10062000C6CFF5CC2D2FF074008837B18882726F59
+:10063000EE7BBE14DCB7B385FE72DF94D1ED19E614
+:10064000D2BBE3D7EB3C775C19FEDD50AC2DDFE885
+:10065000D1966F9EFEE709F1E53DC9DE1D38EF1F1B
+:100660004B3CFF313083D9689E4E298076C7E41712
+:10067000B3C5F94E9EA7F74F625FF4E27446F519D1
+:10068000FB4D7B31FF5DF533CBA27EB28B99F21D22
+:10069000FCBE00D4571149E4FB392996C25EB8DB91
+:1006A000C6F1076D0D30CE0B4BDCB43E322C3AF662
+:1006B000655C43E526B2432AC69892906F8E09BEC8
+:1006C00053CFEBAA7C58A1301FE62FC0A717E2F347
+:1006D0001DBDED28FA97031F31C6E955A950FEA1AB
+:1006E000F81663ED547E4CF0F7310153E0DB0AADB0
+:1006F000E757AD06A2A7FC13790FEA098CCDA0DF5E
+:10070000F8D2E649049FBA7E6055173A33C8A52D42
+:10071000C655740844B1B02754FE460B08DB8DC1A2
+:10072000FF2C203E27791399C6EF4FF879019727C0
+:1007300091AD0E711E8CC7CB724DD171BD386E5606
+:10074000F43BFCBC51862843554807F3FE4D560147
+:1007500097CB83AFFF81F4B2C5E3C7EF18524C7457
+:100760004E465D37B6CEDFBE553B03E759F40D9AD2
+:10077000E77CAB0DE7590C6CBDC8414F6F1A8DC7B4
+:10078000D78F9CE471E33AF94ACDE1994A1CDF40E6
+:10079000FF46DE3F59DBDF05FD1D71FD53A07FC91C
+:1007A000F0FE4F594D21DD541CA7C21D26791EA213
+:1007B000C9CC17F3923378BFF9221FB43005DAA3FE
+:1007C000BE29D6E66BB0E91E13BFAF439B9F71BD38
+:1007D000B42E0BD7D53C53E36018C67B5DD0ED7AC1
+:1007E0009DFF77783FDDEB8B8B8EE37AAB31051580
+:1007F000DC0FDDC0421B9098172BFD4FD8C7913CF2
+:10080000F80BAE8B26D93FC101E5F3FA9EC2BB0BB4
+:1008100068BD7C96356D38BC2A5FA8F0227F209F8A
+:1008200045F92301EE289D6EEAA744B6DD60F7E0A6
+:1008300053B583186BE1F9C6EEDCD8BC8089E69A23
+:100840005A0AD10E79BD3D4072E37AFB2394D7F466
+:10085000E7317E6736C0B5E8AA4FE85E13E65A3244
+:1008600001ED7B80373D3BFDFF1DBCAABD372CDF72
+:10087000F6238326DF76B475A57EB799F1FB69660A
+:100880000FEEA1FCD9E685160F9E8368C6FCCF72D9
+:100890008A2F911D87E784E99E13C924ECAE2F9A15
+:1008A00097CBD7616FA39BECB7A81C1779E5BDA5C3
+:1008B0001CEEDEBBDDEA3D27DCBE5BC2F83D29EA6B
+:1008C0003D27CB6D54AFE69FF7EEE17EBCDEE72718
+:1008D000D07929B0DFC85E60A93A0E5F81F67E1537
+:1008E000FC933262F9D2DBF4DCDEDCA9F354209E07
+:1008F00077621CE8AFC47FBF9AADF59BA8E544BF03
+:10090000DE930EFFEDC817CB4BBC7912F0CF32034C
+:10091000F7DB017FEDC2B31535ACE529BC3F701E96
+:100920006BF9856E1CF1979FF86BF227FC5EC1187E
+:100930007F2DE1FC1520A1A4F25794AF8A13F3ABED
+:10094000FCABB17DAFBDFF574D68A70E1A892E6A6B
+:100950009E5CE23A8E83E7B49EC3E394658267EDC2
+:1009600048F07C113E8FE7AF4CC6F979347ECF5406
+:1009700058C05A16E3F73DC9FE76843FCAF71BF804
+:100980007E6418DCB285F8E3D6DB649E3F9ECCF52E
+:1009900015C62BB2E0FB75E2FBB776733EBAD56A9B
+:1009A00020BEAB1B6CA47C2256CDE30E1EF81FDFCD
+:1009B000077A09BF8B44BF85CE523DB2ECC25A6D57
+:1009C0007C6291458D7FF8F4B81E6F5DA83F19AF2A
+:1009D000EF17B1CD9F60DEDB228C63A8FDE0BB8FFB
+:1009E0006747E31813308E715CECD32F027F23FF2F
+:1009F000BF9ABE72D7DDC0B7131E2F29437FCE9C8E
+:100A00008C554F6D85F2F7764EA2F2AB1977DCFB71
+:100A10000ED6F71551B91A2F71C1FD4623EF5F5C51
+:100A200071DBFC02F8EE71B31817D715EEFB92FCE0
+:100A3000BD75D0CE35756C19E623560BF970F16E85
+:100A40009E0F7FC355569EE2B9D24D7EA3EA245134
+:100A5000FF753EEE5BA5FF568679A9D563238BE92A
+:100A60003EC6B21F4FC2F271E993C523C54D26178A
+:100A70004BA189809F6A076F5F5BF6FD6CDCC757EF
+:100A800057F1F2644F65F738ACD75D5A3CD2B9D014
+:100A90009F8AF5143DF724D6E98BDE0FE99C93CFAE
+:100AA0002479708ABEE91FF27B892C920DFD8F3E5E
+:100AB0006F81827ED2D95E9EB758656ACFC2FDEF44
+:100AC0004D7E4339E69FDA4CA5C7D1CE489D5E39AD
+:100AD0000DE93BDBC4F4A89780CFFF85F8FC9A4F63
+:100AE000F25290B92C5A3E57F9A84EE5EF6A2D1FE5
+:100AF000C3FAFCD7ECF4CF97AFA3F1317CFFDFB1A1
+:100B0000FFA22F69F54A74BC84F59638FE6872001E
+:100B1000FFE2E55C0C8E7E5A57399815360ED75D8C
+:100B20008FBAEE220887413744E73EF225CF243AB8
+:100B3000F0388AFE57E1CB05D9C6CA86C3857F8ABD
+:100B40006A9771086CB60CFC2EAF877E5EE688C192
+:100B500005DF676350EF6FE0F0EC965AB8DC107673
+:100B6000B1BA3F6E52E73BA09D6F45123FEFEC429A
+:100B7000FF05F673964EFA6B70370BBDB9D0E47B68
+:100B8000C80873B8C5BE8CF8E1AB2CF03CDA27C6B8
+:100B900054BF634C3AEEBB0247C205E4CFA5BC018B
+:100BA000A077DA9838FB44852B111F4DA3C8C344A6
+:100BB000B813F110A3CF10D957EAF9A9E8BC12E68F
+:100BC000D361E5EB3532CDA8DE5F528CEBE26D6987
+:100BD0009227DE9E7E3B416F27C2A5DA11AA5E55A1
+:100BE000E1417F11FF7EA41DCF90DD38662CD99D99
+:100BF0002ADF640AB80C3A69C438EA8D6374AA7FA4
+:100C00004E43C7C4734E2ABED4BCA0443CA9793D10
+:100C1000C3E23509F1C8D1DA49603F8F710CC79F33
+:100C20001AEF7144FD5C029FA512C93F87F073CD96
+:100C3000F6F0F309B5ADFC9C7C6D0D4C0070FFB671
+:100C4000F01FA8787EC8EEBF8DF347781AEED3BFA9
+:100C50003BEF698A73A8F7C825E267F928F8198D70
+:100C6000CF47833F2DD5B712BF7B5E1AAAC0CA2DCE
+:100C7000E9E2FE41E62FC07560B71554A21F02E4F9
+:100C8000EA679FE1660EAB80AEE50E7F33F2F9575F
+:100C9000996F0ED2D751E3D773FF3A23FFED5AB1C4
+:100CA000DF9A23F4EDA55D32C507AABD131F9B850E
+:100CB00076E21B7A16A4F5EE25FDB946C07F099FA2
+:100CC000D8DEC2F5EECA377F54012B864DD8AE8BE5
+:100CD000DDAF00FF26069334F72B4CDEEFD094A750
+:100CE000F4676BDA5F353056535F1A9AA4A9BFFADE
+:100CF0008D324D79DAD04C4DFB6BDEABD2946784EC
+:100D0000E76BDA7FE9EC024DF9DAC8ED9AF6A7C491
+:100D1000BE9805BC43C51978BF389FEF759F2ED587
+:100D2000F4FB6DCADC37900FEFDACCF3972B01336D
+:100D30009A7B267AB85DD102FFE374F52988AF1556
+:100D4000606F63DEF2CAED5ABBA37E70EB0694A51A
+:100D5000897915AB594B155E49979857516D5BA230
+:100D600043BEFBA731C2EEB8865D23EE85F9AB74B6
+:100D70002D62E3FF5B7435BAB47435BBB5744D2E88
+:100D8000D6D2D5EAD1D23575BA96AE76AF96AE69DF
+:100D9000355ABAA6FBB474CD5CA4A56B965F4BD74D
+:100DA00031F55ABAE6B668E99ADFAAA55F4160B59F
+:100DB000965E09F456E5E5B8AEB59A7651BAFBEA07
+:100DC000291F667CCFFD9A7155BA07E07F9CEE2DF6
+:100DD00094AFFEB7D29DB120F95F13E97E3681DE74
+:100DE000A0AF3E42B90076C6397C2E9A20EC79DF5E
+:100DF000C876862A7FE2F57AFCBE7534B9344C8F0A
+:100E0000897DECA87A2C611FFB3E66F1907DB49938
+:100E1000FC3CB709FEBC8CAF66A01FF507A49FDFA2
+:100E20000740A6035CEF23DCF09DF79326939FE138
+:100E30000E16D2D3BDBF98890883DE8989C932DEF8
+:100E4000E7E3A6E732A1BF970B3F8437D99F92C350
+:100E5000FD0FF919F8DD9C217EFFF25B695FE89ECA
+:100E60008293E887079D721AFDF0F0BC60E6FC7083
+:100E700046950F5EE676C6E16DE96C89F4323A7C00
+:100E8000703FBBF4AB12C51996FE9E3FC7E770BB1F
+:100E900037F1D9D1AAE28DEF876EC87193FECD618B
+:100EA000FDC27E637ECB381A87FBCD9FE4F78F3E71
+:100EB0002B3165BA838E49111D334D1CAE67F5CCBD
+:100EC00084F87B86F9DD8897EF28209A789EFE24A7
+:100ED000E487A5BF7F672CFAB164D97513DE2F3D77
+:100EE0001DBF0770CCF95A8B847EDD4C578B847EF6
+:100EF000A361EF0FDD2FE1F9C26899F176F88778E9
+:100F000050FD73C53A1EA78EDCCDF7174F7D9D911E
+:100F1000DFA9A3355019C0F8940C0607E6B1E8F92B
+:100F200079E41B72B8DF2D8B0DD1BDA6EC356117AE
+:100F30008AFBE04B44DEFB0511E759B1C7C4304FD3
+:100F4000A2E4E05107C67556002D87509F297EBA4E
+:100F50005FA364C7AB0E7ECFB8DE8EE7D8543D3AB0
+:100F60003ABD1576262E7F1CE8D832921E5F93CBB1
+:100F7000E3B31D6D35B3302EA3C2F3609B7716F239
+:100F800087AC7818C693F0DE9DF8FC338313EAE350
+:100F9000D6AF62A9D194F5161F5D66B1A1AD85F8F3
+:100FA0004C2FEE07DA98B3D616FFBB01AB7374E291
+:100FB0001EF200433B9B8B7A7C2A67503EFC91F1EA
+:100FC0007DA8D105E3C4CBB57BF358BC5FB9ABCDED
+:100FD00047F06E90FC7E1CC458C842E614CC5BC03F
+:100FE000B397F07EC7F56F601E8DC1BAD613728FAE
+:100FF0008E37A34BB9122F971EC801B9941C934B7F
+:10100000DF6D3B4B78EA685B44DF037C318C9F05E6
+:10101000B2B87DDAD1B684DEEBC0CE427E7A65C747
+:1010200084A36EA83F01FFF09E1CA393C3C5CAF31F
+:10103000483F2D167C803EAB5CE09F13AD7AE2B357
+:101040007B722D415C84F7BC3DFE28DEF369005EB7
+:1010500092FF06B8A3DF11783208B904FCE4C3F5A7
+:1010600066C856C8FFEBB02D203AFD77C753F16B29
+:101070003033BA87C6906B21BFCD1785F37B390912
+:101080007ABE3C8FE4E83D022FAFECE0794727EED3
+:101090006564BFDE731FF7BFDDD3C828FF9BB5C2F1
+:1010A0005F458C6F54799D8E3781C0CB9E3610344E
+:1010B000458C3DDC66C293572C19FD64E36274ECE9
+:1010C000F12A7674C76FAD76D6E1F3E1E9A77B50DC
+:1010D000AC6C99F5BB217CA28F1BBF6F6B6141B4D7
+:1010E0003329160BDFB7D74319BE9F22EA53FCBC46
+:1010F0009C2AEA5317F172AEF739A91A014B88837B
+:10110000E45A1CF30A51EEDDC5F8B95B71EE7EB707
+:1011100090BB632C8EBA6AACFF1AA37C7CB5FE71BF
+:10112000519F6539D9350EE5F2426DFF1D020F99C9
+:1011300096933DB3295EA2AD57E31BE9964B6F50E2
+:10114000FF126DFDA3A2BFD572696836D6176ABFBC
+:10115000FF90A84FB67079C87CFCFE54B5FE3BA248
+:10116000DE8CF5F87D8FB6BE5B7CBF430A127DE84E
+:101170008E585C3FE9DC5FDAD7C6AEC5F5D3D3162F
+:10118000A175F470DBA7442709992C3DB6AE6CAD70
+:101190006CC4F3E092906729EEB0D73B82BC53EB6E
+:1011A0001D367EDE5D7619888F8C16212FC43A8C11
+:1011B000CA0BA9C5C3998BFBB13F8F9F61815D416C
+:1011C000FB220FFE909F73EED5317F9CDCCA6E48E8
+:1011D00062FEB8F6AEBB1C9A72C6D7B235ED9D0B57
+:1011E000C76AEA2DE59334F5CC9B4BEB65ADE0ABDC
+:1011F000A492324DBD7A0E9FF5E46AEC677DE14C16
+:101200004DBB4BC56EFAFD9033F3D4DF19F1985006
+:101210002EACB58ECD44BDF34CDB7434B2D9B3B033
+:101220009EF0E8D4013BCF2F3E807159B4D7DBBC90
+:10123000F47E1FD483E5C29E84F5E686F67BDA6CE5
+:10124000547EA2CD45CFDD6D6E7A3EDE564CF53B29
+:10125000DA3C547E0CC6C7E7A3300EBE7FA4AD8631
+:10126000CA5BDB7C54DED2B688CA0FB5F9E9F99DBA
+:10127000B67A7ADFDDD642E58D6DADF47CB02D40D7
+:10128000CF8EB62EAABF46D0FB8038C778A0929FDB
+:101290004B4EA4E3AC5C49732F9835963F302B1727
+:1012A000F307FAC39AFBDD71DE349E99CF3F71BC20
+:1012B0003A1C0FBE3B890DB527F3754C71C7F1037E
+:1012C0009EF5C9C0EF635A381D0A0622549F55CFB8
+:1012D000695127E065CE00CBA9E0C750B1DD0569B3
+:1012E000A82A99C76129BF8CB9609E15E27E1C624D
+:1012F000BBA00EE152A673BDA9D2353A6F3B87134E
+:10130000E73F12BC5F13F397CBFBF9FD17353D2187
+:1013100064FB246F0BDD7F615AE40BE1EF57387DEE
+:101320007E3A8F3FE9D3B9B0B90139F3E997991BF8
+:101330009E390DDA7D4FF65D659AFD85FCE9C3CCDB
+:101340007D358C5BA2DD9F2415AED5F433E5DCAF93
+:10135000A93738D76BEA97AE29D8E0427C8E611462
+:101360009F316E6E6718525CDEBB95E0DA24F07E2A
+:101370004172D379DEC041353ECFEDF3EF09BDC2F6
+:101380004C9B693D4CB0F362516A40877AE1DC8F37
+:1013900052491E3DFD842E88FED7892CA8C3F53FF7
+:1013A00019CC3DAC9F8237E8CA74A58A8CE552E619
+:1013B00096B17C358BD0FE04ECF3F5B9DC3E7FC2F0
+:1013C0008CF1C15CFFF778DE5288F46691A06791DA
+:1013D000BA1FD9AE24FA65BB72890FB5E7993A8571
+:1013E0009DDE6EAFC8C4B8E88551F2CAACAE993381
+:1013F000F177B4AC59D3E9A9BE7FC8AD1BF19CEE1F
+:10140000E3025F2ADF4F0426177CFF38CEE37CF926
+:10141000BB19B8DD6B2A8C10FF5F90BCAE2588D756
+:101420003765CE878359342F45E0553958E95A023C
+:10143000F853DE1EE709B0D8779E6EF3CE54945869
+:10144000B948E445EE6FAB9B591DF7FE75014F316E
+:101450001BAA41FD545CA2F304696497467E990B74
+:101460007BBC78CE5C29631E146F1359CF7AD4D518
+:10147000CA5F64CA73518ECD606ED817582C21860E
+:101480007941AF47E7C934BFAFF43B5B752ADD173D
+:10149000981D957BA813F1F79486907F7ED7ABE7D4
+:1014A000F33AA6AD2FB6F0FC9D15C586A05BC2B081
+:1014B0007A0FDD8BA7F4490C4D7FE52FB3090FECB4
+:1014C0008564E2BFE4ED53E94AED9B14FF0F91BE42
+:1014D000E743EE1774E3042F42BBC6C986BD688F8D
+:1014E0004D40BCE0840A8B09AFCBC57CF7B72D21FA
+:1014F0003CFD5ACCA33337011EE6F1E2BD912B7AB5
+:1015000055FF87769E0F9557DD8CF7EC750CC9C299
+:1015100056D2E273937E682AFE36DDF930C0251379
+:101520009CBF46FACBDB2BE8F7954081D0FC1A9F95
+:1015300080FD7E01C9A31AD2DBD374949F9AC85749
+:10154000A7841C6BC9E5797F56D79767E2EFBCC5C6
+:10155000CAB3883F9FD1B162CA2FD1F1FDA59ABF0E
+:101560000186831BF775A579BAE83D1AF3515FDB55
+:101570007594F727EF49A2F389B25DA13CE34E4B86
+:10158000B56D358E635328AE32579E358476B3D110
+:10159000AEBB1AEDEEE37BEF1FC2FC12395761E8D8
+:1015A0002FEAB429DCEEC8D1513E9662AF36611CF9
+:1015B000A6C872BA12F17974CF37C9BF217F43E44C
+:1015C00088087F925E90AC93B5D0F8811C45DCE72B
+:1015D000E1AD2DCD10210437EE7F6A3E423FCA7146
+:1015E000DB2533DA2B6ECB0AF2A715E615D07CF497
+:1015F000186F83F213EB2ED9516EBDB96783A30028
+:10160000EDE7A0423648F19F3BB2E9DCF91E039DAD
+:101610008B57F19A1F503471BBDC566DD99810BFAF
+:10162000D3279C4BCACA2B107A6E110BC5CD47EF3E
+:10163000E2FB35E6B4D07EA7304F629FE962E53128
+:10164000A2BC5F1FC8F6007E8EED59918FF3BA726F
+:10165000D84F79BEA3D9FB1FE7BAD5DF4332EBE8F9
+:101660007ED59019F37E9F6A63E968DF99820AE567
+:101670005DEF13F2ACD0C2F9DF90CFF93CF159D84D
+:10168000C3D79D722029988C74B3F59705804F2697
+:10169000BF328FB941FF15DABCE43F2C6C35A4632F
+:1016A000FEC0DC1F5A884F2E5992C84FA8B4267925
+:1016B000F07DC7DE8A62771CDCC1365B3AE6E5EC7A
+:1016C0006D33A5A39C0A8E225FC7D97594AFECD663
+:1016D000F17CBAF9791CAEF979FCBE9779A2FCA429
+:1016E000125880703E09F4C43CE9A39BB93DBCB6D6
+:1016F000DD4470AC7D731CD955A3E1EDE936573A52
+:10170000DE0FBF77B32E1BFD4795DD859BF09E84D2
+:10171000B5567E4FAC9C3AE9314C45673FD533B462
+:10172000DF3B52667A96C5C97739755631F2952CEA
+:1017300007B2D12F7267DEFC9B315F12E8B713CB83
+:101740002BFB4A79D91AC8C6FCCAE6BE69BC9C1EE6
+:10175000D889F995DFEA9BC1CBB9816CFC1DA9B68C
+:10176000BE6B79797C60279637F655F232FA9E4047
+:10177000766EE99B7333CAD90E83A71E05F20F005C
+:10178000FE1280BF5F3CB70ABCA8F5CFE17BC0F377
+:1017900021F14CAC7F41F41B18A5FE25513F38CAFE
+:1017A000F82F8B7EA151FA1F13FD8E8FD2FF35D1FA
+:1017B000EF8D51EA7F22EADF1A65FC9F897E43A301
+:1017C000F47F57F4FBC528FD7F29FABD374AFD0792
+:1017D000A2FED709E39F10EDC3E2FD58EBE60F42EE
+:1017E000C07763418EA05C2AB66E76E03ADFDB55A7
+:1017F0004EFCDF51C1E33B2ABF8FC5DF6F827A5DAC
+:101800003EBF4F4A97CFE33CCF88F1810FB720DF2F
+:10181000AD7D5BA63C9B0E9DE76C10E5E8261DD9CF
+:10182000036BDFE4FBF3B5DD4A30FEFCC53309F0A2
+:101830006F10F0750A789FCCE3F139A3CB955E1B4E
+:10184000EF47B269CB9896857217E437E5ED1677C6
+:1018500057751597638C4C471688D2680AE17D0D41
+:101860008A55E8055B794F31C26751E89CBA6257E7
+:1018700042FBB1BFAB9CEC3B15BE4E8B42F775C92A
+:1018800056AE07E6FE70960DEDAC4EE61FF2627F97
+:101890009742F6FBD1AE321BCA3D83F52E1BAEDF5D
+:1018A00076379F5775537112CA6BF9211DC9EFE343
+:1018B00036BEDEFB5C3AF25B805EA1F32C20AF3DCE
+:1018C000A82326B0503B9D8F78F88525DCAFC7ACA8
+:1018D000A515745E448D434B4A9CFD7F59E0275FFC
+:1018E000E81105F50B3C9F2C17E71C02DCFF046494
+:1018F000738D893BAF79394FE6E740D438A25C4B12
+:10190000F716E5AD5334FEF79C7BB5654382DE5098
+:1019100012F4CAB82E9093717AA72060D3944FE640
+:1019200009BF8E8779D07E9DFBC3CD240F2FA17E6A
+:101930009346977B51F92BE4F193E21E9E2703FC1B
+:101940001CF1D1CD653F417AAFEDD6D1BDD35F5407
+:101950008E3E93C7B87FDA0F7A07ED198565E37E6F
+:10196000E9F3F0305EEF73D0BD0A9F838FF18F965D
+:101970003B50DE8EF72BA47786E98DCFC1D7B3928B
+:10198000E73D3FD2D19EC4ED6A1B9F77678693DF08
+:101990004724CE1FCAC25E7B50F8C195D4B96EFCF5
+:1019A00089904E7B0B9537489ECC1BA0FD46C96F96
+:1019B000C3F21B8E24AE777293880FF7A32D43F7E3
+:1019C0001C16F8D03FD21F34A8F71486F0FF0E6221
+:1019D0007E8E7A0FA28BEC33710F63EFCDD5D85E7C
+:1019E000B14D469373DA138F6DD1830D7AD0C0A2B7
+:1019F000EDF13CD533C775E29EC4DD5BD05E3D980A
+:101A0000C434F7401E443F3A8D17DC82F73EC2F7DC
+:101A10006E90610F767DFEF7B658B262F054B90F42
+:101A20006C69A73C59BE2FB1337E4FF779773805E3
+:101A3000970BEC4FAECAC77DF99ED3199ADF5D13A1
+:101A4000ED5345FBA6C148D30137B59F960FEBA0D8
+:101A50007120925242EB2B5211DF3E45ECF7E3DA54
+:101A60007F89C61FA57DB10ACF81776F2DE1ED2B50
+:101A700071FC0BEE7006E5BC24C093367CFCEBFFDA
+:101A80001A3C9344FBF3A177A9FD0516CE9852406A
+:101A9000FD6EC27E17DF7AB742CC3B03ED64908ABD
+:101AA00037E37B34B7F8EFB1B490FDDC6FEAB1A156
+:101AB000BD66D6F7F850EE16E2BD4ED363CF05F9FA
+:101AC00085DCAE4A78DF6F6269B5C88FAD3ADABFA0
+:101AD000F49B86CA4AD09E7ED102320FF5C23A0FDD
+:101AE000CAC181F05A4F09B4EBCB9945FB8A838672
+:101AF000967E3ADFBBC442E74FFB6C3D365C3F66E7
+:101B00007B8F0DE308F27DDC7E52965AFC4F213F1D
+:101B100085D6162F8F5BBF556E3DC1DFFDAA65339D
+:101B2000EE03BAF59E9E0968675B15CA3F57960E8D
+:101B3000CEA7F3823FD03192EF30AF2A287736EA32
+:101B4000E8BEFA87DD4BEF413C30C5E7AB827E79DA
+:101B5000E98A84E72F1E547C268C5F1885DDD6E742
+:101B6000E1BFF7AA7E7787B02F77E4F37BABBA9714
+:101B70001C287E0DFAF5B5AEEDC7EF99279A18E649
+:101B800099F5E59CE9C6F3A28FBB60C70B78B0342A
+:101B9000E8E8F75A1EAF8536A9E8CF3068FC15CFC4
+:101BA0004AFDD43ED0A8A37D82A5C4A0F16FA43580
+:101BB000E8BCE8773CE0F66F427EBBFA6DE506FCD8
+:101BC0009E6BBC6243FDF490EB17261DC09952AE8C
+:101BD0001DD7364B3B8EA35A5BEFACD5D6672CD4C2
+:101BE000D6BBBE6648F0D768CB29C8478847900166
+:101BF00016D04349BC8A2559AED0EF8575FB77F5E1
+:101C00004C8036C6E440E96B006FD2A424DAEF6F53
+:101C10007C3509171FC81F467267E3144679AFC7A2
+:101C200072BFE9427D9A889FBE1C03CDD75208F847
+:101C30002CC0FDFA59FA5D2F0B8B6B5780F8F13EE3
+:101C400093CFF7EFCC5581FE394672F059D57F7CA2
+:101C50000B3F4FD5D7CAFDD20F2DE2798134830ACD
+:101C60005CDFBC7D0AFECED854F4DB77DD8DF98EC7
+:101C70008978CDC4FC3239C61F1BD4F32B787AB2D5
+:101C8000828B655C7797DCFCFECD9705DF1C14F733
+:101C90002D44DB23FE3218DFCAC2786FE6ABFE07A5
+:101CA0007E1E609B1A8F1165BCC610CB078F3B6EE2
+:101CB000C0F5B46DA1A30CD7D3466197A5E618BCB7
+:101CC0001301DE47DE3004A4ABA0ACB0E37AD0E76A
+:101CD000071DFCBB86379302789EEA1157399DCFCA
+:101CE000FA389FFBF39EABF4FCBC96D6A342E7DF29
+:101CF0001E717ACC65DCDEC0BBAE19A51681697198
+:101D0000B4B68CF6A98F783D665CAF8FE478CC983A
+:101D10009F6CCE526CB88E1D2E85EED17AC4E4B77E
+:101D2000A1DDE2000588BF1F67C8ED9947E7920073
+:101D300087BA0A1E1260228F0FF3E8D204BEFA5C43
+:101D400077D9F0FCBAB3F0D0B7D0AF9E86E3A5F058
+:101D50007E8827BBC0D3A57C37CF4B16E3A7DDF524
+:101D60001CB5C7BFCE8AB8F13C9CBF0CF358907E1F
+:101D7000074D7C5F1D273A3EF392DF7EC34F38DE6E
+:101D8000DA73F9FD4186358CF661CF55FAF71F45B8
+:101D9000FC6425D13E3BDB955D85FC91FDC6CE05FF
+:101DA000780E61C34FB8FE342CE7F1A66C8599BE5E
+:101DB0008CF34EF7DB108F89EB30EB784F1D32DB65
+:101DC000FF054658D4C60080000000001F8B0800A5
+:101DD00000000000000BD57D0B7C94C5D5F73C7B43
+:101DE000CB26D9249B0B212124ECE646201736E193
+:101DF0002222EA7209A222DDC81D233E210102240B
+:101E00001040FB46CB6B161214156BA8A86851370F
+:101E10000A142B6AA88058D177B968A95A4DABBE6D
+:101E2000A55A692254416E31B4EF4B5B3FFBCDFFA5
+:101E3000CC4CB2CF9228EDFBF6F7FBBEF86B87795E
+:101E4000E676E69C3367CE9C7366765702BBCDE799
+:101E5000602C61A28DB9EC8CFEFECEFF976A61EB1F
+:101E6000CD098C254DE1DFF342BEA7248DCF2D6235
+:101E70002C79BAB17E0A0BC9BB79BD239D77B058C6
+:101E8000C6065419EB3D197DAC9899900BF96EFE7E
+:101E9000EE7C93D67EDFE0118CF9532D9E6D2EC61D
+:101EA000D2C3C663EC9B08E4356672FD3D8BB1F18D
+:101EB000AE78C6FAE17B9DCB57C8D82E9B738223A0
+:101EC00089B1CE15CCF30C6F3FFE950D73DFE1F9B0
+:101ED000FF4A77382378ADB423CD6D05FC3BDBA7F3
+:101EE0000F46FD2D16FDE9685EBEE5687FE6D71852
+:101EF0008B886675AD1C4F3613D391FE1D7FD7625C
+:101F00001C2B8D33DEC527359231DE45C094F2CFD0
+:101F1000A7AD0307E63B3DE8CFDD66E7FDB65A9C7B
+:101F2000F9169E1FF9F4630F59D3310F0EE3189A77
+:101F3000B6978D66ECF9C37CDC013CE77FF2A189A2
+:101F4000165E1ED55DEE47F92E9349E4FD81872686
+:101F50008E656CE0E1D6350E2763654FEF78C8CE0D
+:101F6000F116F92B51EEE379BF0578A919D4CEE724
+:101F700077306309CDBFF177112C82D72B347B36B4
+:101F800023CF3E8964DB787EC79EB1B35DBC5E63C0
+:101F9000CC28975EC0D8349746F32F43DAEFD27936
+:101FA000996D1EDDE3B8F4FB8D126F8C798EB670DF
+:101FB000FA163E6B63F7F3C23CC00D7AB544069E39
+:101FC000017D9B1FE34CC7589553D0BC6AEFFD19A8
+:101FD0000778FA6A4C59A58BB7AF8A99980C78D2D2
+:101FE0002E32A62772BA35D899CE719596F4338DD4
+:101FF00071F806261D1EC71CE09BB6354EA4755110
+:102000004C0FE1CBB48B16A60F477F5EEA0F7FF62D
+:102010006470A1F86B4AD0D91A0E8F9FE37A1BB86F
+:10202000D319D5A11581F1277ADBD5FAC8049FB25F
+:10203000D9AD05E03A81071BC7A9B584A70E4B307F
+:10204000A297FA77C87A66BB23681EC653E75B4738
+:10205000A95F87E54CBBBDA79E3D60217CB01A16E9
+:10206000C8D1084FFE08E4E31228CFBC5E575232B5
+:10207000F89F1172D32CEC70041F97B897AF9F5440
+:1020800016A4F4498E1E47162AA5C77F1ECDF089D7
+:10209000818F9F616C72285FABD434C844F065D7E0
+:1020A0009BFA9DE0F8C93F14497058D6B340241FED
+:1020B0002C1BF4E074CBDEC0021637EAD9FA9D4837
+:1020C000443B97E403A789D178AD43B1AE36BFE571
+:1020D000D8C0E288BE24773647B16AE04B8DC7D8B6
+:1020E0001AE28780E48B2D0D4EA2A32A1F5873306D
+:1020F0008C8E09063AAA7A691707103D7BFA0D50B3
+:102100007F69F5BB891FD22E66483E717D47FF99D6
+:102110007DF49F42EDFBEE7F208DFF64F0C3F8A9B4
+:102120001C153FEEDC1DEFE369A4B5D9E7E905CF47
+:1021300069B71BE5E4B07D46B9ABF01269F52695A9
+:1021400071FC47DE61F2B4F0FEAE386AAC37D9FDFF
+:10215000513CD6634FFD60D234D4AF15F5AF3A6928
+:10216000ACEF1BB727ACBE80EFDA8BC67AE1F4097F
+:102170008797C3D56F46085C13EC1186F6B32B2EF8
+:1021800081ABDFAC10B8AE4B31D6D7D7F40ED78DBC
+:102190007911DF0A97AAF7BDD197572F7C1ED32656
+:1021A00047F48177517FD6ECCBEBF796EA6FAF77A8
+:1021B0005B7DF8387EB95FF1B5C5D77122FEC19756
+:1021C0004062BDC91BC9F75127EB6458475D725D7A
+:1021D000253027AD67BEF035ACAB0FF0CF54C686C7
+:1021E000B87D5F437E4DB07BCB1FE15527CAFD8A8A
+:1021F0004DE13D5E89CE7D8537175ECA7F8CAD256A
+:10220000B85ED3749DD13E6BF76CE3EB3B3F8DD949
+:1022100053B91EC052029937C73016ED56F29A8B49
+:102220001A0EE75089BB1706B4AE8CA7751E48007E
+:102230003CFFE8B8FDDDDE0477BF9EFAE1F57AEAFF
+:102240000B3CD96CAD2B006767ADC383FDE1431434
+:10225000F176CFCE8C089A39BECE5B1DEB352E675A
+:102260008E46CF7BAB1FC7C307B1BA0BFDCF9E75A0
+:10227000FD3DC86B07135D2B397CE72BDA4701AFB7
+:10228000DE683DDBCDE1A8B1EB8392F914CFA6EB7C
+:1022900083E3805F5F22E195FFA3D0D72BFC029EF2
+:1022A000899AC07F629C5E8871269ADA9EF2E19BD1
+:1022B000A56D14DA31673F82EFAC8DCBBB5ED6BF24
+:1022C000C2C378D9CF01ABE7EB4E3EBF031BE33C63
+:1022D0008D1CDEAAC459F396F3A205265F72D06C5A
+:1022E00080FB2A8C57E3A818940AB8AD126E7B3F86
+:1022F00089776FF6B7C1DD88F1B0AFFDBB16D8E6C0
+:1023000016B444FE157F7CE07E9E8F305DF810F29F
+:10231000A3B3D0E4E17B04DBC2F50B3BDF57DE97D0
+:10232000F87E92AB3FF604FABE1EDF53A244FB9444
+:10233000474D8146DEDE37FE55A2D3B3CB1C1E339C
+:102340001FAB82B96CE0DB4AE6B501FE3F8EFBDBDA
+:10235000EBED7C7E73DCFA74CCE3B64453C68704A1
+:10236000879E5FC6F98D8D15F8FF2E7E606C838980
+:102370008D62EC66A91F2C90789CC6BC568C33836A
+:10238000E9568CFB9B73362FF4D2DF4007E5F0CE85
+:10239000627EFA3E870528BD8505A9FEADAC9DF29B
+:1023A000BF8E2E4AAFE7F0953D363807EB3104EF8C
+:1023B0004B24BFDC9624F8E58BFEC0FBA67E97C5B8
+:1023C000BF659AC0DF10B7BECA4DEBD595E4014C8E
+:1023D000CE09037D3121EB67623FC17F1667CEB71F
+:1023E000AD9FB6AED822368CE4812395E3E13A491D
+:1023F000CAEBBC4BA760BE902058AFDF93EBB5D4BF
+:10240000EC60499C2E6D2E732082C33279DC8A14D5
+:10241000CCF7176BD8AF8673FAFD629C9935524D95
+:102420002FB59B2AFB9B3A70D229E827EFB260D2E6
+:1024300008DEAEF4A27E388EE367AA796713D7B8B8
+:10244000D9E481D6CFDA43E4DAF549BB2C8CEB2F03
+:1024500037641BBF4F29E0F910B93B95597ACA3947
+:10246000FD0F003F903BACD90CFE7DCC1D93047D4D
+:10247000850D6543C5F9805323643E5DF66F6CE7B7
+:1024800079BBB7DDFA53E0A395F1E7E691DE611180
+:10249000F359F69E99F4CACF1A18388F9DE0FAA125
+:1024A0003797B1CFB97E81FCC986144ABFE4FA00E0
+:1024B000D2330D79547EAEC143F9AFDCBE9F804E5E
+:1024C000F3D77F65C1BE746FA4C2B7806395E4BBC8
+:1024D0007BD3473DF6578ED77BDFE50B83C353DDB8
+:1024E000DA3C0960AF4AFF6C2DF4E755CF691ED482
+:1024F0005BBADF6B737078161CD6EF019917BDDBE2
+:102500003E1562A216FA2BD71BEEB3FAF660BC9109
+:102510001F9D48D67905EFFE8EB71279FD2F1A461A
+:10252000135CA71ABC04D7E986C9944665FA5E43D2
+:102530007D2FFBCA86FA37EDECB0A4F1FAA55ECD8B
+:102540008BF5788D9705021C9ECD5621DF3773F9E8
+:102550008EF539AEF0E6276F6790BFFA9B683F2390
+:10256000A1B234917F9F3ABAC2827AB3BEE632CD2D
+:10257000DDC387DFBD0E053E6A255DCEBEA1119E7F
+:10258000CEEECDFFDE55BCBF378E989999C3D57579
+:10259000D14470751D8D0A406955F556EE31933E54
+:1025A000B932DD1600FE56EEC9EF0F7DEA34A71BE7
+:1025B000CBED19EFF40BFFE6D243E4E8E984D6FF54
+:1025C000FA1872EA5321A7B8BEF9F913906303070A
+:1025D0007840F77356AE9703D1AC2E1AFBD8329BD6
+:1025E0005C5F5CCE207F3A4A9C8347BD98361EEBE9
+:1025F00005E3B96C3D7228F7C5C7327FE0EA196F71
+:1026000047EB828F9FE0F9B30193DFCAF799B3AC30
+:10261000F5DCCF2147B73A3C381FDCAB7178B08F7F
+:102620006E1B40F93CCD12554FFC1CA0F59AA7B982
+:102630002CF55CFED4FCECF101E0A7D7380E46F394
+:10264000F2D73646937C7ACDEA39568FFE9E14FD3A
+:10265000FDE487777EB60FE983B5257702C999092E
+:1026600084EFAA1F2D1E8AF67C9F66A9BCBFE75F78
+:10267000D182917C7D166E3AB03695C3376C4B870C
+:1026800069004F8BB76A8D48F3D36F3862E6E5F681
+:102690004C17C1317CA7DB9C86653520F0F1B5B4C1
+:1026A0007F1BF7F5824D5F8DC7F152EDEF43B5D635
+:1026B0002F5B701ECE385AA213FE9AA99F3DFBA72E
+:1026C0007D700BC33CB8E600B82B6C1EDA4F02FEDF
+:1026D00016D0F9AC9EE7B91F6BDAE77F1CF43DAB6F
+:1026E000277BB0BFEC35F963C7A0FE310BCDF39566
+:1026F000ADBF8EB5F27CDC6E2B8BE4E5B5C59D934A
+:1027000050BF36DD45E7F0F4A7AE9B0CFC2CDBBDDB
+:10271000A785FAA9B17B34ACB33D17DE4AC379E88B
+:102720007AE6C901DFED16F907267A3DE0B7EA96A9
+:102730003F8B7C9B8FF23EB3DF6D41FD4AA1E73CAE
+:1027400026F731D65E44F28E58D9D543AF0778319B
+:10275000CA37BBFDA9758E9EFD8FEF5BF999BC3C16
+:10276000D526DB3BA765F8FE817DCB26F721D5DF9B
+:102770006336E68FE4FDA4F3EF1AF6559BD86FB7E6
+:1027800071F9027E51FB2D1FF7AA4CD1DE0B39994E
+:10279000C637D7623E9FB4C72202B4A75FE6F84AA5
+:1027A0004F5A1E25E499D23F662736BEDECEF1FA97
+:1027B000A758FD3ACC6F81DCAF99C59382F91D8F84
+:1027C000F54EC6F835F6CE0CCC81EF8753905F6698
+:1027D000E6FA535688FE64BFBCFD3022CE7B33DA66
+:1027E0005F6EFDB151BDCBDFB15DA349FEBE2EE5ED
+:1027F000EFAA3F9B5831CFAF7A2482E409ED69BD3F
+:10280000E0E575BEDE752E5FFE0376039E5EFDA7D6
+:1028100076339D3F0E9B6ADEE2FB290D9D89FFEB1F
+:102820006C8C1B41792FC87CCD9F4CBD9E0F55CA27
+:10283000E954877979BF36DA1BAEFDDA69A3FE1D4C
+:102840000997355F731FF335C78AF9EEC77C39EDF9
+:10285000567D5542F272FF65CE333DC2BB06F40D84
+:102860009F0787FB5E7C0F87BB9BBF3B2F0FEE3B19
+:1028700034E637619D7D650B609DEDE76062DDEEBE
+:102880005F5C10C07ADE6B13797FAC8DF4CFFD31C5
+:10289000CC0FF9B1BF2C39E077430E32A19FF6631C
+:1028A000A23C52B69F934CED074470FEE779764BFD
+:1028B00094ECBFEE9D4294AF49F37008B87E1B586C
+:1028C0009F49FAAD99EC8647A5BCDE141FBCC5CC68
+:1028D000BF6FFA2A97619CA32C98B61CF5AAA3484F
+:1028E0000E6D8AF7A626703CEEFDC64CFBC2A662B2
+:1028F0009E77909C26FBCEA6326F6A3CCFCF957414
+:10290000D9D412D8F628FA2BCBF3F8F93803CCAC8B
+:102910008EEAB9453F1F5B45BBDF49BAF0754CEB0A
+:10292000FC83CCF941E0599F1A6D815D84633C556D
+:10293000E3F03F5195C3485E4ABBD76C4983B93D2C
+:102940007CE0B58F825E2BFEE62CD81609793CA37D
+:102950003A92EC5247ABD7C6B8F87833747330026A
+:10296000FADFF45283DDE9834C2F8DCB0F16F29CF6
+:1029700010AC041EDFE8B433C8E5BEE859DB3A2EDC
+:10298000F144083F54DB84FC3829F5A15763F4F780
+:10299000C0EFCBF75D9F782244DFAB5A509A4B765D
+:1029A000DFAACB3BDF35824EC368BDFA4DE08FD640
+:1029B00048A2FFE49BED44EF2E87E919D8256F93D9
+:1029C000F2AA110761FEBD714F44602DFFB63C2293
+:1029D0003813F28AD3FFB9EDA0EBEB9144FF1A9BB9
+:1029E000E0A79A9FE7137FEDB579DDEBD0FF1B11D0
+:1029F00044F79A58571C95BF9DC824FF91DE501389
+:102A000015CC8DE7F85C1FAD9F02DE38DF913DB835
+:102A1000C626BE1F937C758CF70138FC7531C48FB8
+:102A20004CE6F51F24D2798AEBA3C4BFFA43F9948C
+:102A3000D76DDED405581F2BA309BE63D29E76AC9A
+:102A4000269EF8BBFCA1A5EF324ECF63BEEDF7E5A5
+:102A5000F27AC7F65B3DD8977E5F6F0EDA385DCFAE
+:102A6000AD3E3E6A33CFB7AFFD24430FB1A395AF60
+:102A7000AD9D8276E54B564FC57ED917BECB6B22F6
+:102A8000B8CCEDA1535296D79CC5F1EFC9D26D5980
+:102A90007C9ECB0BDA1742EE9DB3B53D85F3C1C7E3
+:102AA000717A24BE9F7FF58BED240F2D9DB9D0CF79
+:102AB0009759381F802FE5FEB95CF2E54B597A1C17
+:102AC000EA73FC913E1E5DD026E4DEEACB93F35F11
+:102AD000EEDFB657E3E32C8DDABF8C5273A008FD0E
+:102AE0009CD682B15A16F0C7F538DEDF196730166A
+:102AF00074D0E5B969E90EE3BCF007BBCA52FC83A8
+:102B0000B75BDA6A26BB0ADFDF6D807F292CBD0642
+:102B10007F82902BBC9F67681D3A7E3FEF071CFFAA
+:102B20004B9E1B52027D7269FCBE1F5E45F5783BD1
+:102B3000C5E7E64BF36A3E97C223E67746F2F919FA
+:102B400026E5E06C5BF7391C7AD0B917FA1BF8E67A
+:102B5000DC734328FFA5D6A94571B8CE4979C43C9A
+:102B6000ADA3CA7080F0B68E823EFBA8FCBE34B125
+:102B70007514E48F9247CCDE5A44E7EABCD6229C17
+:102B800027953C63BED65CFA1E68CD45FBBD266129
+:102B9000A7A03FCCFBF9B416C2835DACC725CFE735
+:102BA000135ED438E1F40B9FEFD42CE11FE0F0DE8C
+:102BB000E6E3F5076FB619CA87048CF999B2FEA04F
+:102BC00030BA0C30771E8880BC7F96D17A0D1FF703
+:102BD000D62C614FFFE94FBBE96096E745E652F41A
+:102BE00077097DDB0A7CFFAE1BDFB7A77179BA14CA
+:102BF00073CCEC99FFDE623D0D72FF9C49D8A9F7BA
+:102C0000C6F37C01F41C814F9557780CE7A3B5BF40
+:102C10005B98067FCAFAAC6E3F477FF05B23E425E2
+:102C200097178D56818F2F1BAA879FB0E03C5A972C
+:102C30005A65E999CFC2CDC576AC97455B8AEDF36D
+:102C400043CE3B8D3B861F7171BA9CD96121B34144
+:102C5000A325F043E8D18D3BCCAD7E46E5762FAF82
+:102C60007FC671F03DD45BB825BE047AAF6ABF68F9
+:102C7000F31DA95521F8CEDF61C47F61AB310F7B15
+:102C80007468FE47D00547FEE3ED8A83C6FCF02357
+:102C9000C6FC171FDE3E136CFCCA68C1EF27033168
+:102CA00001F8A9AA3F997404FBDAC9BDAFC4823EFA
+:102CB0004B3FAD7A0BE796459B8D7CC6E9A641AFAD
+:102CC000F76FD7883F1607C2D79D5CEF97ACC73523
+:102CD000CAAE9917CA27E1F43CCD5A677A393FD575
+:102CE000D4AF1C0E7F48F514CEB81C9E2B5B37DA90
+:102CF000E037081FAFAF75CF1C5E17EC5515A34525
+:102D0000D998FAF1EC388CBE1B7E3D09EBADE2019F
+:102D10008DF6FF8A97071F86FCEED835E7064A67CF
+:102D20004E263C28FBD9A2FD5A3086E79DA35DFBC9
+:102D3000DA79BB05018DF687F94D113D7288FFAF39
+:102D40006A43181C9B42CA39FC8BF61DF88BC6FBE4
+:102D5000AFDE626CB798E30B727FC9D6BF47847E43
+:102D600057E7BE31FB5BCC98F70205BFFF1A8679A7
+:102D7000091724171D525F39810C97F71109BE36C8
+:102D8000EC2F633689765C605560BEB50E9B0BF305
+:102D9000ADB5B3603487E3488CCDEBE4DF2F6C8EA8
+:102DA00021FBD4C208AE179650CA224BD0CE43FBAB
+:102DB000F4E7EF9B495FA9C5D8E8E7698DCE3FB539
+:102DC000303622FFACC82F66419A07F8C51B3ABFC0
+:102DD0008031CF9AC5B9A9C6123C007C2C61EDE2C6
+:102DE000DCC3E9E80DF1C7D5F0791E4D803E646C77
+:102DF000BF9CB552FDE5FBFE1E11FA3DC44E4AE7ED
+:102E00003975AE34DB9817FAB1F9EE28DAEFB9204C
+:102E10008E027FAED3BC8FDBCD48C5BCFC1B85FECC
+:102E200033B745EC175C3FCD057E366D1CE2819EC5
+:102E30003297EBD991D023164751BD4DF18CEC2B35
+:102E40009BE6E40A3DFB9B978318A7F3118DEC23C7
+:102E50009B8A45BF9B1E1C42E590871A8D13417AC1
+:102E6000CBA632559E4E7AD2C7002D157AAEFCDE27
+:102E7000CF45DF0798BDB9D0D7D9C39174DE577A53
+:102E8000EDB3097A6C76BF9EF92A3D98555F9EFE98
+:102E9000B74DEE779D1B85FFF784E67BCB14A29799
+:102EA0000ECA16FBC3A8F1DEEDB21EF901AA4C65ED
+:102EB000F75FCBE1A97AD4E46A74F7E09D79BDB9F4
+:102EC00098FF898D9125E0B351E385BDE758B19016
+:102ED000DBD1239837C0D3BC6CB17FE4659B0C6910
+:102EE0004A14E73FDECF8952611F8E19E1233B1B55
+:102EF000D7D9487E87CF638484AFCAE67BFBEA5E7E
+:102F0000E0E9E6838942CF38B1427B46C0C5E9CAD1
+:102F1000F3A37E1449F6B913725F51F8E77C33923C
+:102F2000F66929AF364A3ED908FA633F5B2CCE4199
+:102F30003D7C62E483B99AC02B7B50E8A79BE245B5
+:102F40005EF1013FEFB0BF824F4A19E1BDAF738F11
+:102F50009AE7A61651CEE93D05F40E3FF7287A33DD
+:102F60004B6024CE8D7DD17BFEE8F8519A89FCD64A
+:102F70007EF8ADB1D7115EEEB304D67238065A04AE
+:102F8000FED32D82BFB854F64795507DAF8DE72B09
+:102F90001E5EC4BCBC7E451A237B10AFCFE2509F9F
+:102FA00077833816EC1568571127FAADE8CFE89CFF
+:102FB000407F5C5E6523CDA47EBDA604D13EB68471
+:102FC000DAFB4DA2BDD7C2D34159429FEF5C171126
+:102FD0007806F2F9DEF45CF0C194F1463EF88F6CAD
+:102FE000B1DFAB74688E4B1A953C2958DFF39B8692
+:102FF000D07ED118E9ABDD03BABD20F4FF8A7B6E29
+:10300000BD6924E07B31D103F0BE9CBA8BFC0DF38B
+:103010009BE6DCF111CE0D3B22E9FB7539FA5DD957
+:1030200023A107BAE6EDE11FE6CF38644BE1EDF5E9
+:10303000D6B2B33FE7E954FFAEF7A00F4C9D6EA6A2
+:10304000FA5399B08FB22631CE4DFEAF2C29BCBFBA
+:103050009BC66A1433D011E9CC58C1E1AF90F4BBE0
+:1030600047F26F63249BFD3307E04ACFCDE4DF6F67
+:103070008286D98BFFEAB0AA3F4EDB02BD66D00440
+:10308000B1BE547DF4837EDF96EB69A3C48BCA7313
+:10309000BC52FDAAF5111D59B148ADC1C13CEDCCE2
+:1030A0001DFF08F86A4A269BB41978BFD38C5805CF
+:1030B0000E6F6705ADFB985C17F854672C48F1114B
+:1030C0008121C4D71DE33A3BEEE5F98E96C11EB2CD
+:1030D000F9C873F4029CAF5C2817724CC99763CE91
+:1030E000F618E25779AEAE94ACF1C7FA098F5EC11B
+:1030F000EB573A6C1DD80F163C322D167126959B56
+:10310000CC229E6383F15CCDCFBF2F812EE1E7E41B
+:10311000F0F33078067C54B541233E1CD4E8B1A5C9
+:10312000921CD39C985F9523980DF95EE589F4A0D5
+:10313000FC4C8337F14436FC119329655F73BC8FD7
+:10314000823D965110C7C11C7D3FF054D15C41E7D0
+:10315000C5E8029DE4D3DFB25D84E729B02742DEF3
+:1031600058DA53B10E6BD5F70467AE83F839920184
+:103170000F1D56672EE0EA581769C2BE3965ADE0EB
+:103180006BBECEEC16DEFE3E0B8BC27ABF5FB62F57
+:103190005F63F1B5F0FC403BB3C42480AF8A89AFD4
+:1031A0004B06EB1B818793FFCE4663FFAFDCB091EC
+:1031B000E0517CC12C6D1313A1DF6D7397DCCF7AC6
+:1031C000F8A864F0F80FD0AE9B1FA66BC4073C3D77
+:1031D0009045FC70F351944F191FCC5E59003F5637
+:1031E0000DF3C28F90C23CB00774B14ED227BAB86B
+:1031F0003E0179A6E489921B9C0FBC88EB51F455E3
+:10320000F2637B030789E37547839DD29F36389924
+:1032100085CB809D0D29947FB1C145696B431E7D8F
+:10322000FF598387F2BB1B46537E6F8397F2FB1ACD
+:103230002653FAF3061F7DE7782139A4E48A9247E2
+:103240008A9F945C0AE7A3791CBDD794507B927B3C
+:103250004ADE611EA6921E79A4E89BA9F9FC296E9C
+:10326000C8B1F6399017A5E6332FBC023B49B5C368
+:1032700013E1025E84DCEB72D849CE67D8D83E9C5D
+:10328000D71B57783BEE0DD9576FA9D69825844F99
+:103290006FAD8B6496103EBEAD3EDE902FAFFFE06B
+:1032A000CDFEBC7F2D5E77E470388EDDFDF993BFD7
+:1032B000E5DF9FBEFBCB1CD09BC3B1ED318CBB3A8D
+:1032C000AA1B8E04E49BACA43F0C8A12E720FC816D
+:1032D0002EF399589F4FDFFD575ADF1DF5112E33FE
+:1032E000AF37BF3E82F0F531E8C4F1FA7B49A78AD7
+:1032F00075C75F7805EB7CB58DE4DCFC26B92ED76D
+:10330000737C86E86B9FA532D2CB342F63F0C37CED
+:10331000F6EFB620DFF3D9679A3DA041F7E187A425
+:1033200072FE5D5FFF0B8ABFD2EA8F903EAC232E08
+:103330000B7602BFD5108FA5D5CB38ADF681863878
+:10334000AAE8115E1BE403781A749B9F7790615D75
+:10335000B366CD892DA04A7EAF5AAF91BED1AD2FB5
+:10336000E498898E75D9164ADFC31AA7FDA299F68B
+:1033700027C5AF5C5E78035817CDC5B68521727836
+:10338000BEFC5E9967A2547DAFCBB6513FEF41388A
+:10339000F07EEFCFCBB42D2039E7B2410EA8FAF37F
+:1033A000F34AEEC91C817EC625B190F5E8CDB15037
+:1033B000FB3A047AE17C6417F6FF9A3EF601A59782
+:1033C0009CC43FAF24F8E9BCB5E4C5E75F847F6CDB
+:1033D000C9271144A725C3A43DA220306A1AE933A6
+:1033E0005E87C6E7B94CD27FE2F39FC6B6F3F2E53B
+:1033F000BB85FD92A71D4897ADAE26BBD6320F5FA9
+:103400001F0990AB463FF2E1173F896DA773853FD7
+:103410000DF1857C5B486329F0171D9F04BBF87292
+:10342000D6790FE2BAC2DB2DD7BE8E15F67DE12725
+:1034300057FECBD2D7FF9C4C70ECB9900CB9B6FCC0
+:10344000F575C97A2FF35E1EE6BF567E7365075B7E
+:10345000CE367C05BF5B78BD9539D2AF7D05BB828A
+:10346000EC141646710C2BED020F5D819C38D6CB07
+:1034700078DDE36EE6829D9F43BB2CAE380F87F369
+:103480007C1F717CAFE488FDF9ACF4A39EDF692654
+:10349000BDF0FCCE18E2FF653B1F7EEB2A9E5FB6B7
+:1034A00055C3B0AC96B5119E96ED36337BE8F90660
+:1034B000769BC4BEE15CFA7C4C1DF86971ABE6DD1D
+:1034C0005600BFBC2BAE5FA8BE28F9696944EB2843
+:1034D000A28384FF7EA91FA97A8BF73F6C03BD7876
+:1034E000BD73A4B7BC140D5D9BFF75BE07384F6F4D
+:1034F000194E7EDDC5ADBB96D1BEBF33DA89297EBC
+:103500006935DAA30239623D057284BE715ADA7FE9
+:103510004FBF6826F90338B10EBFD4849D57B5DB81
+:103520002EDB6D9778BB2947AC47557F716B476C95
+:1035300036AFFFC5BE0F286D95F35AEC682BC27EDF
+:10354000F9C5EEE8C9014A7F3CE9353EDED9D671BE
+:10355000495AC8BA7A3D47C40D9FDD629E0C7CB1C2
+:10356000808A336AA5F99CDE99A6D1B916F8E6F8E7
+:1035700039BDFBE55813AD5BBF6827E968B20B7B2B
+:10358000AADBE292F60BBB137AC65CAED5C57179A5
+:1035900057BB5BC403847F57F569BDA582DF3B6DD4
+:1035A00082FFA5FF5EFA97102742FEF8185B00FB2A
+:1035B000EBBC61AE59B7409EBD6315F418E87A0CB8
+:1035C000E7AA79EF2792BD62A5D5D51FF93FBD6B5C
+:1035D00025FBF9BCE1729DA7B48F847DB2C32DF6A3
+:1035E000F59AF57C85F0290FE0F4F7F3F9D5044C52
+:1035F000144F793C2793E07AA2DAE4B5919F23989F
+:103600000B3BE5311BF39BA127FF2C92F4BB9A4C9B
+:1036100061777F02FCCED39A84606E22EC5D928E3D
+:103620003537F3F2107AD63C13CC85DE72C626EC21
+:10363000782877222D11F51A25DFA01FF4DBE1761B
+:103640009E23FD724F0C839E6F7A2546D8137E12FF
+:10365000497E07D5EF05C9578DD2CFE5DF26E003B8
+:103660005CD09B17DB9A73A157AA7117C736D37822
+:1036700067E4788BA39A85FF40C685A13E8D6F6570
+:103680005E9CC73B9F8B20FDF4CBD4B6BD18FFCB0F
+:10369000E786901FBCC31D58B88FCAB9DEC6E9B013
+:1036A000E4A71141C07BEAB918F2739EB20A3DE863
+:1036B000544C32E94147621E9D87FEBAB64668B057
+:1036C000A79CD2982D05E5DBFA91BF6A49433DF9E5
+:1036D0000996F0E50E7F344F27C3AF7C6ADB10B24A
+:1036E000B39CFAA599FC8BFCFB7A7CD759F3BCBB45
+:1036F000B0EE7644939DEDCB9FFE6D48A8FF41A5AB
+:103700004BB61AED498AFEAA3C2957ACAFA45C819E
+:10371000C7945CB1CFD446B73E9A49F314EB95D326
+:1037200081CE5B7C7D24C33E7DACF5D564CD013C70
+:1037300007737F0CBCEF10E79A2F775AC92FB2E4BA
+:1037400095182FD96FEEBDC284FD628959E8BF4B31
+:1037500038BB8954D88796C4E6927D88E39BCE8F88
+:103760009DDBCC721C31EEA9EDE9C2FE1E94F9BDC1
+:103770008501F0F9940476DBCDA4DF6C29025E2F7D
+:103780006C8D36812FF8385EF8ED97DCF50381CF2C
+:10379000B885A48F33C4418F82BF5CC8CBDA7BAFBE
+:1037A0008A433C0C7BDFCC20FA2E583CFD210FC312
+:1037B000F1B52857CACBBD4FDAE03FABE1EB05F1DD
+:1037C000414BA5DF74E94F35D2E796DE73D563240C
+:1037D00007DFB3B21C0EC799D6876343E95126FBB6
+:1037E000E969EFA1FA4B797DD1FE9D588267BBD57F
+:1037F0000378C2E978D9ED7F6ABEACF6DDFCD1CAA8
+:10380000F7F5A24BE77D81B57DFF13C8919D911E11
+:103810003F7D6D25BFF3696BEB42CCFBF40B91242C
+:103820005F4EC78BF5FE0597877E1BE0B8F121B28E
+:103830006FFC661A83E85E1430F6ABC69D992BE4E4
+:103840006F6DA2270EFE8C5A4E07F4C7E9F23D6A4F
+:10385000FFBE95DA87CF63A46CD7BD3E5F88267E16
+:10386000393D40D0E3F48B83695FE988177CCEE172
+:10387000CDC039E574BC487153067CB0449E434FBB
+:103880008F6BA573F7696D17A51D56D16E49BDF4F1
+:10389000DB72BE4B01DF8027E1B7B26F68831E0188
+:1038A000FBF4A8124A83110997DA99C19FD8875E61
+:1038B000CC15F62CA83590EBE4DF20FDA4D50679D5
+:1038C000AC4B3DAE66E7A5FE32F283EED4C8EFF313
+:1038D000A05CA7803A49D9C7393F2EF56B5EC41B5F
+:1038E0002D6D5AB118FCBEB46EE32DE077358FA56F
+:1038F000163619E7AB0ECD4CF07444F275033C84D8
+:103900008E97D983DFCD0A5E809C4C7A2629D75BBF
+:1039100072C57E857C33EFAFA649DB40E3B8D5792D
+:1039200052CC4FE189A3C5063B193FE78BF23EE637
+:10393000AFE00C9FBF82A73557D8273ADCAE87C6C9
+:1039400082DEBF3293FDF4C2D7C3E312BE452FC35C
+:1039500089ADDB5ECCE17F9DEFD5E8C70FF986F539
+:103960000C7B348733778BD1FF91B7D5981FBAD3AF
+:10397000982FD86DCC17ED37E63D878DF96D725CC9
+:1039800085279C7311D786732E529C735DB9E29C78
+:103990008B3CCEB94871CEC5779C7391C7391779E6
+:1039A0009C7391C7391729CEB9F87E4ECAEF1A69B0
+:1039B00077041D28BEEAD548E507A7F5727E4E328A
+:1039C000C94FE5CF3CBFB880F2DDF69C323BD973DE
+:1039D000549CCE2D71FAD15CF21BB6DD930ABA5914
+:1039E000DAC98EBBFCE7C28E5B5312E9807DA17DF4
+:1039F000DD17F7407D2A8AD33FCDA5B8A6CEED22AC
+:103A00005E294872A37D8DEBFD6B05FDC8CEA1E25A
+:103A10006E2AB0DF25F44DC7703F0ADB60F49B844B
+:103A2000FB51C2FD27E17CA0FC264F5B3B5321EFFD
+:103A30008F3F67DF00F88F4BFB189BED24FD4BE9B0
+:103A4000D5DDFAD783DA33D8B7BFC94DA0F65D47C5
+:103A5000B8BEDDCB7EABD2CA8B25A43776E73768FC
+:103A6000268A1B4989A57D6895842943EBECB81704
+:103A7000F22EC644FBF8058789CE05173E34931E07
+:103A80003118FA79C87C8604A20CFC95BF2321CC9E
+:103A9000FF37C0507FD8BECC30FFDF50A35F6AFA3B
+:103AA0009A03385F4FDB30DC50AFCA7755181E25BC
+:103AB000DC522F6D5CBD3903F267554C17C1BF6AEC
+:103AC0004F24C5D5567178BDF0CB21C351506DF749
+:103AD0004E05FEAA5BADF1D8E72BE5FEC3EA8DFBF0
+:103AE00071B585F99D093D7C57ED64DE78DEFE6C8D
+:103AF00071F37613A7DB59D39647C7BAE0576AC963
+:103B00007072BEBA5D6B4DBE92F7F7378B5E309820
+:103B1000F35B8635F8C372C8CB5D596C0DAF777C0B
+:103B2000C3CBB1A4774B3ECBB03AA340EF966633FC
+:103B30009D0B60973227F4F0434B736254B6A36732
+:103B40009E3DF4FF9AE6C7E9E2C13DC52EC7C1819B
+:103B5000ABA0C7B58AF9568FD3FCA427CBF9AC9498
+:103B6000FB0ACB16FDDC2EF327E47941CDEFCC9098
+:103B700003452EF8311BF6659821C74D3BB7E3FE90
+:103B8000C0DD51FA758347225E32E7B763F9B84B5F
+:103B90003E12F1BA7FDC3421F64AE89F2F583D539C
+:103BA00078FEDEE6676D38172FB1046C3877563F24
+:103BB000D762F3F2F4BA1D2DF47DE18E0A3A6F2F2D
+:103BC0006275748E3CA9E26F253EAAC76B5B9C1C94
+:103BD000EE17070BB9511D25E2364ACD63DF445C71
+:103BE000FA851D5A31E63BDDB7CB5601FBB3AC1766
+:103BF000BE3EBADE9D56DA0FF6A456E1F7EC6B3DF9
+:103C0000CC08E6D17A9876D145E9F48B43E91CFBE0
+:103C100011F315929C28083BCFBE2BE290BBF68B8C
+:103C200075506D0B264DC33A79C34AEBA496CBAFC2
+:103C3000D1253827333686A7BEB16603BF2E9F181D
+:103C40006DE0E7D92CC1E0479E894B9B21F9E953F0
+:103C5000B20CF5674DCF0FE3FF929E729223630C77
+:103C60007126B5ABFD2E8DE259C61BBFF37435F13D
+:103C7000D90D86F6B5ECE69E7A38076FFD35E199E9
+:103C8000B1361BCE5BD5261157335BEF90DFDBE9F6
+:103C90003B9F88611D0ECAF2FC56EC8B56B2CB2BB3
+:103CA000BBF46CFC3BABB77D91135A8E8BF850D8AC
+:103CB000170CF1851C003A7F3241875A69EFA9CD74
+:103CC00013F69E5A7F9B0DF1B71CFF96348E9265BA
+:103CD000CD1AD9F3787D7B5A82C8AFC6F7DDC6FB13
+:103CE00006E8EF22CA8F982BB05EC2CB97F17943DA
+:103CF000CF58063B0DEC4CAA7FD9AFE2CF459B8D48
+:103D000076A365B0E784D0F1ABC12EE2D3253B7634
+:103D1000BD3580E3659A2FBE18EBA7A6B5CC5A51E6
+:103D200070299F29F97EA1DA447EEEAE770F119FAC
+:103D300075555B889FBF0B1FCBBCC29E19CE7F0BF6
+:103D4000F97CE0975DB85BF30434510F781900BE3D
+:103D50000CC34B5A2FF85278EAC65B58F922FC6321
+:103D600004E206B440D0DD1B5E241E55FF6178627C
+:103D7000A38D7858A8BBDE87BC5978C4CC02973194
+:103D8000EF45981FC6E7F3C3F8375F147612E5379F
+:103D90009879D142F96E3EF189F8E9E9538CEBB29A
+:103DA0009B6F7C629DCCB8984CEDFEB7F9E7BBF8F1
+:103DB00046C11D1E9FACEEF7FCF76069271CC94683
+:103DC000D2FABFCCB861B5DF2B3C0FBA7B34C51338
+:103DD000753932497FE8DE6F9CC6F29531991447F8
+:103DE000AC4BFB9C92BBBAACA7C6A9E0E5AEE1E048
+:103DF000E381C9B0BBDED39495D11EA297E8EBACAA
+:103E00006437CD5893486945A43319FB45C51AB3A7
+:103E10000FFBE067F7F54F1E0D3BFC3A6BD214DE4B
+:103E2000F567778EC86085C897527A7C63C4EC507A
+:103E30007BB64A5D79623FA8BDFB28ED5F674DEF19
+:103E4000C6CEC63A5BB7271621354BD77D30CAC9D7
+:103E5000558F168B3E280F71845ACB7627F0E66C6F
+:103E600029823D7A1868D7AF474F58B2AEB43FECBD
+:103E70005F35DF1C7A0AFBBBBEC69A0C3DF3D487C4
+:103E80007CFFD368FF22FDE024E28F93E0B78AA68F
+:103E9000FB6D2735E685FF66B1F94091D3B09FEE03
+:103EA0009F09385E8DD287E5919F36B03D05E37B53
+:103EB000FC142FA9AFC989EBCD5EA2D2E59B85FE8C
+:103EC000B65DD96BA55D177A3BF2D0DBE11482DEDB
+:103ED0008E3CF476A4D0DBF1BD4CDAEB07357616D8
+:103EE000E3DCE91FCFF2EA687F75E4412F5FA54567
+:103EF00079206F56699EFEB083B1ADA9625F0DA3B4
+:103F0000AF4AAFEEE4BA5508BF5F7BD1CE42E3C7FC
+:103F1000C6B178437E823DD550BFD4E936945F97D1
+:103F200032C4507EBDABD890BF31EF4A43FD9B3CBD
+:103F3000E30CF9EF8DBEDE50BFCC5B66C84F9B3CF7
+:103F4000C7507F86AFC2503E6BF66243F91C7D8539
+:103F5000217F4BF59D86FAB7D6AD31947B99D382FC
+:103F6000FD6D3FCE531CEF6FE03CC5D355BFCA710A
+:103F700084D275EC04535D6FF6F8EF4BFEDD3CC464
+:103F8000BB02FC992EEF81A4CBFB1C4D792EE2CF16
+:103F900034DCDBA7F36C5B2AF826BC5E78F9D8E842
+:103FA00083175C9C867FD83173BA85CB87B1571C49
+:103FB0001C9EC5F309431E986EE17265EC55075FC0
+:103FC000CEE4F90143DE14E5C30E5E40F903431E5F
+:103FD00012F9698C548BCC21E3A7FBF93CC65E9B9C
+:103FE000B9C123EC21BDC65BAA147840DC22F08065
+:103FF00034C8F913E941CE9F480F73FEACCA66EC92
+:104000002DCE9F488FF07325BEBFCDCF9548DFE5FD
+:10401000E74AA4EFF17325D2367EAE44FA9B86D9E7
+:10402000947ED8A053BBFF6CA8A6F468431D7DFF07
+:10403000B8A19ED2DF37F8E97B204FD90F826467A1
+:1040400051FEA465F0E3C10EB7CF7A26D4CFAAFC07
+:1040500081CAFFD758C7DAA3B14EDB2DF19FDB7BB6
+:10406000FC7A7DCB590BFB3C44DF6A89F63E9F47C7
+:104070007692814E92D7F2FB786D5A7A094FFFE221
+:10408000D27781DE334A2AD7C5B9710FA4CE0A7E12
+:10409000F9C8D4FBBDE0A63C617F5839C4BB97F892
+:1040A00044FAB1951FB93B3E25C4CF6D0A898BA157
+:1040B000BF90F816E56F56F134D7D8457C9EF227AD
+:1040C000ABB819D55FE94546F2EEEAF516D24F6274
+:1040D0002C2C88FE557CCCD5F6D662C40B5C5DE3F7
+:1040E000A038B4FEFCBBAD84EA79CD3CDDFA675E56
+:1040F000BFA8C77FDD5FC2CFCB09FED28B3AD95DA7
+:10410000AF96FE7BB4B78B723FDA23760A7A064FFE
+:10411000C9AEF624E29C4A7AFCE9A81F2DEA07D131
+:104120005FF67FF1F1627BD64F7A426B31E2A9D222
+:104130009739289E6ACBB820DDDF5AEED63F039D23
+:104140007C11CE4FA369FD64A5C34E5026F5DE6FEA
+:10415000A1C31768A7F0A3F0ACE8A2F01B12774444
+:1041600078ED8B4EE1F409A78BA247E9C51E3C030D
+:104170004F97D2A1874EB0C7FEBF4287119656BA5D
+:10418000FF175163F700AEEFA2CB6D9D6C12EE13DB
+:104190000FCED49B80E78A8BAEB790AF64E32661E5
+:1041A0006B52E59EEF289F85F27E7D97DFD147F920
+:1041B0003B912A1EC1EB28E6749920E5C7AA5281DB
+:1041C000DFC96E33E17742C122D2479943E8752EA9
+:1041D000FE1FE4C9A4AF7D4DE86F5292513F54FEDB
+:1041E000E01B647F93C3FCC03748BDF18630BD70CF
+:1041F000D410A9F7B9995B9CFBC43DF789729F4E17
+:104200009374CEE287F9B1A023D32D105A8771CFD2
+:10421000BD08F7C0FD94BF9E0528BD910569DFBAB2
+:10422000890B38E4BFC718C5331E8A9E5ABE9CF757
+:104230003761F8846C7C0FB9D777DD907E74AFEF6F
+:104240000FCE907B7D0727BA486F3868CF223D0696
+:10425000EBC01A6247FB2597FB086538C4F705A435
+:104260006FF27D219B33F92FF8BE80FC0D796B181E
+:10427000DA4D7219E34D54FB1B9DE3996578DF72AB
+:10428000F7C6A25707C2BEF24EFCE089B03BBF138F
+:104290007FC544CCF79DF8FE269146D8282D7C2575
+:1042A000BB373D4BF161CF78939825F152FC2A7CC6
+:1042B00086E351E1F79FC0E78ADEF0D9041CC0AE67
+:1042C00067FF20362513FE2FB1FE6B5F29EC0FF838
+:1042D0004F0134C425DB055EC2ED3B5F34B081C0C5
+:1042E0002FDB1A47DFEF903C7475FD18AA7F4DFD58
+:1042F000689ADF5551FADA217C9C3325C15CAE39CE
+:10430000B02FB634D2FDDBB32F9A3DD0BF6BCCAE0D
+:104310000D1EACF577C47D39F6F5A10CF8DBD8D6C7
+:10432000DEE3766BEC0A6F7EC2A737D3DB24F63F61
+:10433000718F58EDBF032344BCABBACFDAD77E3CB4
+:104340002A4AC8958111420E2A3AF176944FE3FD2C
+:104350008CE27223EDA128D2BF4724781F073ED5F7
+:10436000391AF14DD8A7AE09E6C7213F19E7499E92
+:104370007F5BDE4F7B7B685D5226C7F7219BFE2C5F
+:10438000DA31F3D766ACEBC61C8DEEB9771DC94A9E
+:1043900002BEB7A97557C48A42DF1B50FA71F7787D
+:1043A0004966F28BAF847F3409E7263BD98BAE6137
+:1043B000B9E4379D28C72FFD6525BD83A0EE7D4458
+:1043C000A4988CEFE7B8A20CEFC144E72518F231AE
+:1043D0009E0186FA71A3330DE5F1DEA186F2C4C910
+:1043E00025867C3FDF1843FDFEB3C71BDF75D36F07
+:1043F00030D44FABBED99057F22B4D7C62E9757328
+:104400000DED07D5CF37D477FB9718DFB7F17BDBFE
+:10441000F29221F7C45FD6FA9586F21FC78A7B0D08
+:10442000931D0BE9BD8A9CE6BB8CE34B3AA5C509FD
+:104430003A319790AF7EFE1FF8A634C5286F273813
+:104440008DE76DAE0F6AD8DFD3EA2C86EF9FFD0FA4
+:10445000E91C8E972EBE3505511FFA10CF5FA30FB2
+:104460007D08768D8949564F80097B7AE8BC604F7C
+:104470000FC503ECE9A179D8D38DEF4219E90E7B82
+:104480007A68F9F02346BA8F6C33D2FD8AA346BA14
+:104490002B7E0CA7CF95ED467E08A7CF5527C3F8F6
+:1044A00043D26336FFEFEFE29E34D16B9243634F0A
+:1044B000B8FF79FA240FE5F4C9EFA1CFFF49D35330
+:1044C00087F6C3FDF40B1936D0AB53BCD7B742CA3D
+:1044D0004F154FC8CFBBE23EDD5D66F2EF1F3335AF
+:1044E000D37B49079DBA1BED6F2BA8D3E03F4861F2
+:1044F000BE5D0B397CF3FE2382FC09F306897B9DAC
+:10450000ACA09DE2EC959C9B9726E258860C95E723
+:104510000B8F886729182AF4C2188F93E25E2B0A42
+:10452000C43D027E2CC8985708FE793712EF1676E4
+:104530006D12F6FB76ABB85FEAE77C04BF18F44473
+:10454000E871E9528F6AFC9DDD0EF8076F66867D83
+:104550007148C06E88BBCCDFE134E40B5B530CF5D3
+:1045600087ED7319CA8B837986F2E1473C86FCC8D4
+:10457000B6D186FA571CF51AF257B64F36D4BFEAB1
+:10458000A4CF904F639D8F03BF8334711EAD1A2A51
+:10459000E278F81A227FD2BC7BE3C5FD41794E5503
+:1045A0007AB08AC7D525DF85EBD3836C3AC5F73659
+:1045B000A6320FDD03B0CBF30933EAD9BA8CA75585
+:1045C000FA28F31BE369551C6DB73E2EF56FA50F56
+:1045D00087C4D17A43E368E7C97BBEE1FB5E9DA453
+:1045E0007B38FC836C62BE8D77DAE8DE82822B1C1E
+:1045F0009EBFC9F8CE6DF6DEEF8FDC3D54F8DB7F51
+:1046000099E5FB3EF8F529888FACDEC6F3B4FB399B
+:104610007F35FEBBCDB3D6F5DDE3CD1B26E6536E6D
+:1046200032DD565640714BB37F1632FE0FE5B8AB04
+:104630000AB45EE7372F4EC415B1389B0BFCDBF78D
+:1046400078029F2936D644F75C64DCF9AD1B5A1F0B
+:104650008489BCDCD66C15EF9705ACE08729E3B9FB
+:10466000FE540CBBD5370F3BB89EF154BD85EC1002
+:104670008F0CBD69863FBBE71EC1207EBE007F4018
+:1046800057C1B9C45E20E266F70E15EBBFD4FC75C6
+:1046900077FC37D9D31993F25B9C5B7AE137E2431D
+:1046A000358F7F751C78389ED4B990C97D275BC241
+:1046B000A5F0D77D8E97F853F1F8AE1556DF330E7F
+:1046C0008AEB9F8C782645BF8105822F4F0E15F40B
+:1046D000463DC8A3BEEA959A0BE260AFED62AE38E4
+:1046E000E7B7D823FF557851F8EFEB7E4F5FF2E143
+:1046F00012B9D0C77D9FBEF893FEFE817B3F21F2A9
+:1047000041C497487A04B24DE4CFBD37C6B88EFB9A
+:10471000E70BFCEE57FB859F9F278D7282C1BEDCA5
+:10472000B8CE2CE584D857A16FE0FB827556D237FE
+:1047300058BD8847AE96B298315FF29811F0C75ACB
+:10474000E93DAB6BBC8CF491F90E5BA085D7AFF063
+:1047500087EFAB5E6A4FFE1A17DE2DF1DC03FB7BA1
+:10476000E57A63BD450EF1AED782B073E922792EAA
+:104770005D14762E8DCC97FBB28779486F92FE67D9
+:104780000567375F05B2282E18E754B3B09750BCC1
+:1047900052B71D1FFE85907734393EA3F2B06F37B4
+:1047A000597A8D23EBC6671F7EF233F093BBB0FEC0
+:1047B000BBE8FE4FD7EE48E14753FE0B59FF8CFF95
+:1047C0000295A33E7A3B5BDC56043F52B7BF23CC35
+:1047D0006FD2E530C58E467F3BC5FB0B2A0E60C904
+:1047E0005F0345CE103FA7DE6E32C45D84A7FA9A00
+:1047F0003D1417D062D14BF2F93C4E5B3C76BC17AE
+:10480000799FE36032EE6B4F91F69A7078BBF5D0EA
+:10481000B19AF013FA851EDA3559233D94CB4586BB
+:1048200075A4FCD9652C988454F90FF4F5A309CF2D
+:10483000CA7F50111C4D70CE685C64C5937DED8FAE
+:10484000AF2E8D72F5F815DAD3453C4A5FFE8569C7
+:10485000173DD4DFF48B63A89FB27CB7B8C7D5F4FB
+:10486000E00AF0D1D01DCC8A79B687C563ABF4409D
+:10487000BEB07F1FCB57725BC6B9ACD1849EAD3141
+:1048800015F742725BE52F34CB7CA9C8AF5A27F2EB
+:10489000EDF21DA3EDD2DE807922C57C702EDE29DB
+:1048A000ED11980752CC03DF21A790879C421E721E
+:1048B0000A79C829A49053F83E9FF9328ACDC20FD5
+:1048C000323164DDC00F3231440F821F24340F3F78
+:1048D00048687DF84142CBE107092D871F24340F3A
+:1048E0003F48687DF84142F36CF4F53D79C8356F77
+:1048F00099213F8DEBE31343D62DFC20A1FDC30F7F
+:1049000062E84F5F61687F0BAB37B4871F24B4FE4A
+:104910006DF59AC14F729BBC975EB93981F8638E71
+:10492000DBF7C37C4EDF3F447F738715E734F3FE2C
+:10493000C5747EAA8DF2083A374F1674373141E7B5
+:10494000CE3944E7D536912F1571B1BDF91B2666D6
+:104950000B7F0352F81B90C2DF8014FE06BC870D4C
+:104960007F0352F81BF01DFE06A4F0372085BF011F
+:1049700029FC0D48E16F400A7F03DAC1DF8014FE95
+:10498000067C87BF0129FC0DF87E0C7E8FEC1EB8DB
+:10499000A0B7671BCE779C0F0DE73BA7210FBD3D4E
+:1049A000B43EF4F6D072E8EDA1E5D0DB43F3D0DB02
+:1049B00043EB436F0FCDB70D75D1BA84FE1EDA0EEF
+:1049C000FA7B68BEB0D9FF266C4C376D3977186911
+:1049D0007B8CF694C645C1FBCF1F9F01BF517BA4C2
+:1049E0009611CF97BC553B356322D7CF74195F56CC
+:1049F000C43AE97D675DBE5BA30719C5C316FE25F2
+:104A000045C805756F087F9CEEC5BB199D03CAE4B8
+:104A10007EAADA7B98D34C724BD6EFC9F75E2F7C17
+:104A20007C558FE465081CFC80588C3888E2D58E54
+:104A300012C4716F3769220E72AD88430DE72B7374
+:104A400081904BDB4DBB0E4621AEA542A3F7E2732E
+:104A50002DEC08DEF12E6CAE2B81BE703A3F5ECE9F
+:104A6000AB6E0CE26214DCCA0EC8E504DDAB1ADBE7
+:104A7000C96C5505784F8CD91640BEDB849E807674
+:104A8000383FE6FB35EF3321FCFDE77CB1BFE9FEA3
+:104A90001563AAF8F7FC9D7563705F6B4A9468F71D
+:104AA00093A763098F539BB467702F6EEC4EE6C5D6
+:104AB000FDCB6FA43CCDDFE9B455D1B84EBAE7A524
+:104AC000FAADD89241F7D22A58FBC414B2E56BF480
+:104AD0008EB9C21B9FDF61CC8F8BF82356D247C59E
+:104AE0007D9128795F44DD13715B7CC1A1237BEE4E
+:104AF0008B5C3D22BE14F15A6CBF7877EFA611157E
+:104B0000EBFAF1FEF5807877EFEA3FD5BD49F9ADD4
+:104B1000E2DD3D628351340EED6B83FD1ABDF7304B
+:104B2000D5DF624A72E1FEE81A6B32EAEF641EA832
+:104B30003F8399B807A9E02B606D26BC3BCEB798A0
+:104B40004389217CC425C074D0BDD863A5F720CA91
+:104B50002C4E2BE446F83E7E693C5D989E10160F65
+:104B6000D1B8FA68863913F61E932708B9B5279A83
+:104B7000F405A5EF54C838A80B4D6FD27BD615BBF2
+:104B8000847EA0733900F9A7E2236AB3021926E8EC
+:104B90000B035A8A12CC62FF2FC07D24FFCB334710
+:104BA000BB708FF14D8AD7AF5837324EDCD711FE2C
+:104BB000872A89A72A19FFC20A9CC9D03BD53BA6E0
+:104BC000A5E6B17174DFAD59E873CAFE52F1ABE1ED
+:104BD0006F81CE154FCAF740D657D03DA0F038149C
+:104BE000A51FAAF74E16375929BE6571981EB854ED
+:104BF000EA814BC3F4C01B0AC2F440F53E9DAC539E
+:104C0000F1AB4333484FA913EFF195AF117A0BDBAA
+:104C100025DEB12F5F33C184772BCAF7783D5A2F39
+:104C2000FCF1BED45FA660D044C4F90CA074E6C504
+:104C3000144A675DCC233980BB18A07FFBAB8CF492
+:104C4000E90FA4BE3203717EB81FE78F90F17C8C10
+:104C5000F4A562E62C85DC18EAD50EC17C3DC5AA18
+:104C6000AF431CE1941646F7616E825EC30B664348
+:104C7000CF190E3E7797D2BD80C91ADDAFB869C48F
+:104C80000AC9D79CCF19F8DC2FF9D647F9EEFD40B9
+:104C9000F2B7EEEFB0D0BBAC7ECD8677D974799EFB
+:104CA00055FC1BCEE7F3E4EF4D3087B03375DBA145
+:104CB000002C3DAE72CD4CE88BF360BB1B2009C9C4
+:104CC00051145320CA9B0AAE99D984C3CDFFD03E5C
+:104CD00051AE7E8781EB5990A7B7DE5E6C9B1F2299
+:104CE00057CA8AC63F5BD8AF87EEF3BBEF8D15F48A
+:104CF00087FEBFF2BE9CFEDF767FB192E319EB63C5
+:104D00005E5CFB1D7819776B01F34E1C8DF798D50F
+:104D10003C5910F16A7365FED7058BFE737D01E186
+:104D200087F2819D5366FA69BD0879750BE4951980
+:104D3000724A7FAA00F73BECED93408FE8824E79F0
+:104D40001F5EEE4761F6885F17083A84DB252A0B61
+:104D5000841C671657C62D744FD545763D05FF67F1
+:104D600056E3BD4195FE52ED230DFF9A78FBAF92BD
+:104D7000F59F437E3C6A12F7B707989B99B40F8959
+:104D8000DFC990EB87C9F70C7AE8CFA506E87F9FCB
+:104D9000E60CA5BFBE5E13F7A6FBB0E3B0BCCEC762
+:104DA000B7C18ED7207E9FE3E95CC1474FDF652303
+:104DB000FDBBDCD6F626DE695278FCA4FE4756F130
+:104DC0003B2FC11CBC3F35B72E92DE7B2D2BF2B59D
+:104DD000812ED1051EA2C7B38829E5F5DB9DBE0F44
+:104DE000309FDA0D079EC2FDF1E5FBDD74AFB162C5
+:104DF0005FF13D78D7A2AC483F8AF20A87D386FD9F
+:104E00007B59533CED67F3FACBFB85AC93FC540A1A
+:104E1000FF9D05C28EB5BD48F47F5E9E432028CB22
+:104E20000CF5645C71D83A51F6C1703B43F87B02D3
+:104E30007DAD1F654F80FDC016625F54F6096BDEC5
+:104E40006773B07F96DB8CF7E154EA2E94E75C79C8
+:104E50000E5CD0BD7F154CEA0F7D79A346BF5B5336
+:104E6000E570CDBA92E7AB8E581129C8A624B8C414
+:104E70003B12F7897724E6F3F50A79532EE386AAE5
+:104E8000368FA6F55615E06962DFEBF2968D87D274
+:104E90005F05FF04BD744FBCCAE9B52584ACFBCAED
+:104EA00066CD70CF5CE5E30B853DAE1C4F98974017
+:104EB0005EB86D78CBA59CAB1588437317BA0C7E92
+:104EC000575E8FE218A664B2B7C43B3E1C6EB7189B
+:104ED000AF24A4FFF9CDC6FBF2BCBE7897A2308602
+:104EE000FAAB70F279C3FEE174129C1C0F84A7CE5A
+:104EF00007797F2E1A87E851190C5871DE2E47FC6E
+:104F000004CFCF7506AC18677E9378B742DF20C612
+:104F1000D1D7C7DB0AA12F599CB674E04FBE6BCF27
+:104F2000E1233958C5F182FB3FEA1E60387E2A240E
+:104F3000BC55CDF1463DAC79A315F498D3C7FDF926
+:104F40009B24DDE7378DA3FBCF55162FC5D7EB127A
+:104F5000BF7F5C11793FFC0373363D6675F3FCD56A
+:104F600085827F6F92789D9219CCA1F76956447A19
+:104F700000E71C6733CDAF1BBF8F707C687807C517
+:104F800047F8E57CE1471C59D526233D7BE011F825
+:104F9000ADDA5441EB6DA145B73943E1D87C200728
+:104FA000F77AE6F0F58D77779853A7FB369F3F3277
+:104FB0002B83E6C9E1045E633CAE49786F86F30952
+:104FC000F1B1E217753F588DB7A050DC135C50D893
+:104FD000BB7DBD675D7A49BF69E4F485DDBBAF7514
+:104FE00069C345233EAEAD4ABC0316BE4ED5FA5446
+:104FF000EB52AD53B57E9FB2FA82295A8F9CE1FBEA
+:105000006DDDCF7AC1D3B312DEB992AE1CAF874348
+:10501000EF156D2814F2A83CD3B8DED11FFABD4BB2
+:10502000958F0FE6E01EA0AAAFC62D97BFD305BE91
+:1050300007BFDD25E98EFA2BA9BEF17E4465B7BC1A
+:10504000D8B92E19F2629746FAEECA070FA5FF1BD0
+:10505000F4D817841E7BBA66DBB254D80D2C818C31
+:10506000D0F799AA82423E2CE0FA0FE4C542B94F2C
+:105070005F97A3DF573832A4DEC32FE4EA42BE04B1
+:10508000215F7EFFC26B1F8D71F5EC9F0AFEF9EB6D
+:105090007F6DAD7084E24BF0F9FD795D74EFABD2BA
+:1050A000617321CEB6B2A982E42D4BE1E7092D242C
+:1050B0004E2A8C0F2A9A347A37ABB27E54C0FCBF8A
+:1050C00028972B3794D1DB3C8A4EEAFD0DB59F2AF9
+:1050D000F8774AF8E74A3E7E49AEBFB9D56EDB4263
+:1050E0005AF76E5B25F85F96CFA9327EEFA653B7CD
+:1050F0009FB9E09E14798F85CE251BACC2BEB73315
+:1051000086F4D5D32B5F796F26AFF7E5A32D19D0A1
+:105110004F141C8BA41D6F81B4C72D947A2BA7D379
+:105120001B85217276D1D3824E952FFEEA53BC0F98
+:10513000559E29E5D983E27EF9FCD65D44B739EB6B
+:10514000375ADDBCDE7B856E839CAEAC2B76C23ECF
+:105150003D777D8B1572E0BD4281B7707E2F9771D0
+:10516000A90AAFD877B410FF85AA0FF9B78B8F7350
+:10517000FB8AC858C465A871FE5BF271655D7C024C
+:10518000C6ABACABF821CE3D4ADE87AFBBE3916244
+:105190003DCCE7FD615D1E1FE7A17BB6E5F2F7A5FB
+:1051A000C2EB9F9374FBB155BC239816DDFA1CC566
+:1051B000152C8FF2403E6467B707302EF81970DB6C
+:1051C0004CE2DDC1EC9AF6AF0007578B293E05296A
+:1051D000DE3B829A9CCCF3CF98C47D20C496204DB0
+:1051E0002A12FC00D314CA59523BBD7F16129F6984
+:1051F000E0571BDBBA1EEFAFD89218FDDE8BE24FF3
+:10520000D58FE24FC5BF7DCDCF517479F33BEE967C
+:1052100076883C4F06EE51CC7B6830BDCFFF5DF306
+:10522000B4C977F0BAE71B217EB7E092F9668B73B9
+:105230004BDFF3DD549ADCCB7CC3E7A9D6898ABD6A
+:10524000EEF62B340BBFC2718DEF5FBCDDF1159113
+:1052500014F7A5E6A5ECDE971B2FEF294A9076847C
+:10526000F618E891E5F2F7205850E4F1BD2CE4BBC4
+:10527000DAF7D5BB614A3E9FA893FB226B7F10EB08
+:1052800099D567D13B19C79A8FC7E0FD8EE3E30438
+:105290007CAADDED5671EF95C5D85C783F919FAF44
+:1052A000E8771F1634F5A773E4ADF55924176EF5AA
+:1052B000C70BBB83D4EF174A39187D7BC53D57A078
+:1052C000FE66B753E3E32C70783EDF4CEDF33DD040
+:1052D00007A33795D93249EF15E700E507BA5D63B3
+:1052E0003EBACF043989F5653A908D7D67D16671F4
+:1052F0000E986262EBE12F1CD4E89B940A39F1B856
+:105300007837926D31BEAB7430C7776311F016F603
+:105310001ED9EDD6566F7FC871AE6FC0CEB4C0E156
+:1053200023BDFD6D29278F6DEAA0F7C9155E2FB942
+:10533000A76213F7523B634C647FBBDCFB2A55D258
+:105340009FA4F846F9A39EC0FF5D093C99685F2BB6
+:105350003597D3BB3EF76C9A4069D5C6D247FD85D9
+:10536000B80FEB4B1E43705BC93E56553B41DC1FEB
+:105370007D26221EE79B0CAB3F23542FAD6AB997C5
+:10538000EEA99C6C89A47B2A139D6513E393E8BD69
+:105390005DBAF7A5EAFD40AECB25B5130CF74C1668
+:1053A000F03E1107FBE7D6688A2B55F747EE8ED201
+:1053B000BF5FD44FDC23B9D225EE8FA4527D57AF07
+:1053C000F670957EDE20EE2384DC8B993A87B7AFAA
+:1053D000A97D3916FD2C7DE483511C33B03FAD050A
+:1053E000DDBAEFC56C16F7621A715E821E99E09BFA
+:1053F0003907F8FFA599F0DFD778D5F85192907367
+:10540000C4AD8138D25BF520B3C19FAC3B19E9C56F
+:1054100027CDAC1E7A80D25FD4F747255E4EC635C5
+:1054200067803F166F7F2C03FBCBA918912FDF3EBF
+:10543000EB6DC82B7D6B84D0CF2D8CF4E14ABFD0AF
+:10544000AF5975827A1733721EFCB145D1E21D1E29
+:10545000797F46C1A5DE5B3D6511EFC5E05E0CF8C6
+:10546000FD134B7001E8FB09D75F718EFD819463DA
+:105470009F349BE97747FC7CA1400FF9A4F9E5181C
+:10548000DCCF55FA5AA9F9F75EBC47B3728FB8A7BB
+:105490008A77CDE9CD4A69075926ED202B5FB54EB5
+:1054A000C2EF8E70FD8BBED45882B6DEE8B744EAF8
+:1054B00057DDF9DDBBE8DC56B353E80F35AD1DA46D
+:1054C0003F287D44DD8B5BBAB383F409D56ED96E7A
+:1054D0008197DADDE27B05E2D6E5EF856AD9384FC0
+:1054E0006B94FFB460FEAC3596D07C05E53F2D5043
+:1054F000F6914ED207EFCFFB0D9DC36B9B64BF3C73
+:105500006F0D19EF4D30693FF13DCB81F662DF57EA
+:10551000E5B5BBE3A97DB0366A3DF679EF32870584
+:105520006963AD83F6FD2D75A63CCB080017E581B8
+:105530001EB75FC66FF55BFA9F91B01FA4B2CE4352
+:1055400078F7F5A0533F0A7E55BF67A9EEBD9C7F53
+:10555000FD8BE1E8FF9A41ED17F0C683754DED2C08
+:10556000F827DA8BE43C0ADA8783AFFB1D14F2F9E3
+:10557000492B5B4FEF075B7C0C76FBA0F42BFAFF0B
+:105580006212BF2FA1059F0DD5AF9286093DDC1792
+:1055900021FC8B5EB77E0A707C4FB31616E34CED90
+:1055A00032E7A07FF53B2A4A4F1D2FE573BA3C5FD7
+:1055B000D906A438C0C79AD74BF710D7161CACC46D
+:1055C000BEFC40A79D7E5F55C5E18DEF8C22BD35A9
+:1055D0007DC064DACF34978595F3FA070B4C41DC34
+:1055E000DB7A80D9455C803D4CAF3545523CB2B644
+:1055F000FF177F813C4F337F7508BF5392F66F1AB8
+:10560000BD7F39AFEBF327F11B33E52C504CEFE0B6
+:10561000C5EBA66190C35D933B744EB2079CAD761B
+:105620008FD8275828FCFBEFFC4B6C82A907AEF300
+:105630009D9FD3BB82E73BED64AF1DBF5FBEB71735
+:1056400006CFF91417C545F37AA4679E7798E89DAD
+:10565000B1F1FB0FD1BB79E3D5BB7A76E3BB7ACC52
+:10566000951E0F7B32D950B95290DC28E8764D9CBC
+:10567000F19C98334C9CB7728609F9A1F0D7653F2D
+:10568000F78EAEF5ACC3E5CA7FAF7E6FAA3A827ED5
+:105690006FAA6B7FD6B7BE9FF001F407AE176CC838
+:1056A000F4160EEBD7B37FCE907851FBB059F63F8E
+:1056B00043E26786C324F011F67B1B8A3F14FD1575
+:1056C000BCEADE91A21BBBABED4DDC0BE2F42A7C05
+:1056D00088119DAE203AFDE5DD75B8E63FC0ECEDE2
+:1056E000D0DDFF123A05F10ECE65D3A92D9C4EC137
+:1056F000C8C1D0131E11BFBF151ED7C8F218ADF315
+:1057000079E628B203EAF25D70BEBEDFC4FA56EB5A
+:105710007AD0E4F642EC8FC7F8D11B70B59B5AE9FA
+:10572000FBF7878978C281AC2D55C6DF8C845ED6A5
+:1057300028DF3FEEFE1DC3C50E7A6FE47C40BD7FBF
+:105740001C787C211F77D38C02B2EB9F6772BD5708
+:1057500077BF932DDE3FEE7E27DBEC273BC99C28ED
+:10576000B2F374BF939D23DEBB7E4D63B97887D6B9
+:105770005F66A7F8F8F077B2F93EF31CFC194F54B6
+:1057800047911F4ABD8F3CDEA9D7818EE1EF233FB1
+:10579000AAF9E62C407F850EEAAF7D4ED48BDB055F
+:1057A0009A83B0E31CAB8FA177A1155F2AFBF5208C
+:1057B0007FC7E3C093BAD7F907C95F0AEFEA5E9BD8
+:1057C000C2BFE233BF95D1FD4FD001EFCAAAF7D9CE
+:1057D000B5D5526EA8FB846F785C481F8CD7D70371
+:1057E000EEC6155C6E905DBCFD0ECCF7C93B63BC8C
+:1057F00080EB98C9F8FBBD2A7D7898C9F03BA1F3EE
+:10580000E47E354FC5FDD71BE3FEC3DFD14C8CF3DF
+:105810003D328CB73FAB7D300A1FDFFD3FE65EE3D4
+:10582000489E92EB7F44B4FE24EAABFB0F4A3F7CD8
+:10583000B7F88B74FABD91AF0FD1EF2ACE75FA028B
+:10584000A817992DFC017F486DA7FB1A7F98F3D705
+:1058500074B227AF16EF7F5E2E9C97DEA715FCB0C3
+:105860006A8188374C6375C4BF293DF7342301C76B
+:10587000FF6FF7697BEEBB4E1E7E82E22E7CF47BCF
+:1058800015E1F4181B71F065173FA9FC76D897B3A2
+:10589000E83E69DCC1556E9E3FF6D239914F3B78A8
+:1058A000C1CD69D3FED27991CF3F7801F7513F7BCB
+:1058B000A953E4AF62E4CF3AF1D257B370FFB4BF5B
+:1058C0005BFF23E835F362DD9BD85E3F5A73F3023A
+:1058D00037DDA72C4BCF13F7293F41F98CE4F9EBC7
+:1058E000E2B49EFB94268FEF8FE0DBF35F09FE7638
+:1058F0007358C127FF6CAAEE932A79DB975C54EBAF
+:10590000EE5F751F56AD63B6DDB3DE0A26F4FFD336
+:10591000F7549987CFEBFF021C7874630080000076
+:10592000000000001F8B080000000000000BB57C89
+:105930000B7854D5B5F03E73E6994C9249C80B02EA
+:10594000E104420C18D299BCC05BEA1D2089015ABF
+:105950001B6CB52018068D90D76442A82DB5D80CC5
+:105960000611A8DE0B5754B06827400035E8A001A7
+:105970002718EA00922252BF98FB37F2FD5FE10B35
+:105980003E90979310B557EF55B96BADBD4FE641BB
+:1059900022DAFE7FF8DAEDDAEFBDD77BAD7D86B196
+:1059A000B196F3D18CFEAEC98C1D3FFC9EA249641A
+:1059B0006C4681D16A90A034772BC6020EBB01DE03
+:1059C0007595F935B1BC9F36B45FA2D766C17E75B7
+:1059D00066EA973908FD72B1DF9F476BB1BE416F30
+:1059E000356430F6B48EB94D098CC5688EC8B84E92
+:1059F000CC2063CDD07FAC8131631E63297AC6B0E1
+:105A00001DFA312394BB06F97AE3121A56309867CF
+:105A10005C85D9DA9C81BBF53056C858DA28FF6816
+:105A2000DC5FDA4A3DD5C7687A940633638126FF86
+:105A3000DC0F33192B8E8ACD653F8052CFB2711F98
+:105A40004C13656D85F54AE4AFBAD2006EEC906CEC
+:105A5000B0342B36946F671319ABD7029088FF339D
+:105A6000795A711D6D77F51EE8D7939C66DD08E0C5
+:105A7000D8D4832C331FC6BBCA72D804C68E5A1C16
+:105A800039D62468679B241C1F9DC3C7FFAC2C7AA2
+:105A9000870CE3FB0FDF54E880BA3B0CCA01666554
+:105AA0002CDF3B7A81F61680E39442C902B075EC94
+:105AB00002ED688053940312B41BDDA31714DF8238
+:105AC000E7335A3ECC66EC174C627180970CAD639D
+:105AD000BA15CEEB2CFB44CF34D83EA02F9F0AF74B
+:105AE0006A854960FDA4A3704FB0CF8139319E1DF6
+:105AF000703E96A314627BBA6E20D602F7D1FF9552
+:105B0000B6CC63A671B13F87FA6BF8F7AF8C3DD77F
+:105B10002953BD0AABE5375689EED795697E0CEF60
+:105B2000AF3ED568A4B2F36A29C379B4E59977C0CA
+:105B30003C763D5B529E73FDF801AB86F695B10E47
+:105B4000103A86C8CBCE14F8BF28A6C26E369DB1D7
+:105B5000965F41C5BFF0763809D34FD208F896ADAD
+:105B6000C5DAB0FE76EC1F6C6776230B8E775AA7EA
+:105B70006E5D9B29D6433C2F639E49708434D620AA
+:105B800031B8BF54E627FCBC644BA073D11FE0E9D9
+:105B9000D94453CB46A45719E8328F4A6681322D37
+:105BA0001AD683F6B4374C1EA4AB5D264EB7991AAD
+:105BB0005EEED2F0FEFA28E6463A1D073083F26D1B
+:105BC0009BE377B6249AC74FF3C8FB6D488FA39920
+:105BD00097D64F616EDA8FDA6F2CEB3621CCB40397
+:105BE00059844F5933EC7D26D9666E463A0B34D929
+:105BF000D947DA607D203A765528FEEA71BC3974BF
+:105C0000DC2C1AA78E77AED2B08F46E1E1FD443F7F
+:105C1000CE4C8DDD9383E3D89B521ED677EBCB63BE
+:105C200082E37A9B8CEC23B8D7FFD3C4A83CDD6415
+:105C3000A1F5FF6F532A957F6B52A8FE6C533695E2
+:105C40007D4D56AA7FBF693A95772D8A2940FA770C
+:105C5000F966B28F8C42CEC0FF9C5E9DA32F04EEEE
+:105C60009D393C1DBD26E8A83763F8F66E6C077CAD
+:105C7000F6DECAF1D97F3FF3ECC820BA5C6B49B8B5
+:105C80001EFF30C284E7EB8F610BBC704F6F17486B
+:105C9000347FFF680EEFB7EA683EBB866DC5F16FD3
+:105CA00017E8F9FC133455D86E4FE0F3F666010C93
+:105CB000FB59307DE6CBC897F664A8CF0BC2BD5325
+:105CC00078BB7D0CAF57F7ABB6FFCE66E17428F01A
+:105CD000DEAF83F57388DE697EB5FFD7459C0F2361
+:105CE000FB7B3235659E61EE23C1C6FB135FC07D31
+:105CF000B8910F3242F8A25E21BE50E950A5BF977D
+:105D00006CFC9E330D82CE4127D0FDA16E40F99AE6
+:105D1000027C20D1BDD8199C679724F825921FA03A
+:105D20004439AEF283CA072ABDA7019F4909C1734E
+:105D3000FC28825ED5F2B495E3A53B39E601C26B3F
+:105D4000A7CE02A210FA03221310BEB3C00EE34A7C
+:105D50001E35370C27BFE2FED97B50E5C108F7702E
+:105D6000DDF9F5BCFCBEE727F986721BE9761879E8
+:105D7000F5B53581F6A3D26D92CDFE5F483FFD9219
+:105D8000492BC54169E2741379FEB70BF83954FA0F
+:105D900079C9C6B8BEC4734EBC5EDEA9E7193AE73E
+:105DA0007246722F338AD747E2573D5788DC8BB152
+:105DB0001506EF93316E0F8C057B606346907E0372
+:105DC000495F2E43FDB5CDAAD0FEFEA09109FFAAE2
+:105DD0003E19AA97E425F373C2F40CB3001E070E14
+:105DE0001B88BFFD1A56F50A8C6B2555113CF76DC3
+:105DF000362E0F06174CD2AC827D05FE6E76A3DEE2
+:105E00000A8C19382BC1F8C0563040C87EB0FF58F4
+:105E10004A66EC7ED029A897AE809C63598CC9DB7A
+:105E20003E3F2BC1BE976D9319DA350110DB328CE2
+:105E3000733D19E331F2718CC1B83A31AE79EBA7F9
+:105E400077217D9D07FA44FBE62353FD040676CFB8
+:105E5000EC6D3ABAC765317A0FD61FDBFAC48945B3
+:105E6000009F6F9714B4374A6533B5D73C2F7B70CA
+:105E70009D3A73E94509EC9C407BCB535150EFDCD4
+:105E8000AB63261857DA2E59FD30FF726F0CDE0C0B
+:105E90005BB645F77E5F76506EDE26F458D52EC988
+:105EA0000314C3AAB687B7D7EC0A87EB983608C3A2
+:105EB000FCB36C318964FF4D6636B4FFD896045448
+:105EC0005643723B92AE506D237EEC8D5C1E33F6D2
+:105ED00059F21D4097F2E1CFD3DF377378BE80CF00
+:105EE00001FCC9E7FCFED57BAB1732FF93D1ACC0F8
+:105EF0000BE7AC3F6CB2B8E160F51D329D23E08D3D
+:105F0000A37B7645F5DD4E7C7A48B6A01DB6C12749
+:105F1000BBB1DDD969DAA98173D61F9018DA9F4E1B
+:105F20009FC1C3EFE9EA326C5FEE3359146C3F64F2
+:105F300060328C0F00DE4C88C7717D847FC42BDA01
+:105F4000A7F0F763A928887F19F19518C457F3566D
+:105F5000BE9FF37B397E4AE5D55AC2578BC4524265
+:105F6000F0FC67CD8B43F8C27EB3B7FDB50BF1BC37
+:105F70000CF6675010EF32E1F93CE007E7D51FFE61
+:105F800028BDCF1CC4B70CF8FEAD3A1EFA2FBF01D6
+:105F9000BEAB987B1DDA73DF17CF69C8FF4964F782
+:105FA0009EFF03DABD31608F23E908FB38A9B6F7FD
+:105FB00078222C589170D9B902EA27A5BEC232C105
+:105FC0004E90E21D8F225F9F9DF39747101D3D73FA
+:105FD0005FB4215D34EBFA5A9F860A777CB4157959
+:105FE000B03F63FEF6D7609DE2842FD3F723BFFC5A
+:105FF000C96041727A42F023FE1901FF4EC6EF1BC1
+:10600000F0780ECFEFEC34F80D708FACBDC43E6469
+:106010000F4C407DECD5A39C2AD10F54AC407B1C87
+:10602000E6C375242023E4EBDACE3F9F96609CA460
+:1060300024B2C5081BCD7E19E769D35D193A37CC68
+:106040002359FE42FDDA6C13E8FC13537EA4A0FC36
+:10605000695EC81C5113BF4DCE3392F3CF0A7F65E2
+:1060600044FB6F0479AFDA7DCC3D361EF90BEF822D
+:10607000F30F973BCBA733F127F842C0556BDCB148
+:1060800046E8BCFC666B2A9EFF63A4B358A4BF53CA
+:10609000DA51B0AFBA5689F0568FF483FE15EA375D
+:1060A000A8EFF70A39F27C77F1A8442C252B702A47
+:1060B000ABEE94AD7E68AFF6717ABA8E6E84FCA8B2
+:1060C00069E3F2E33A3A6A0338C44EAB47BA526125
+:1060D000C0F7C9A0FC987A0DF6FBF23426F4955B64
+:1060E000D05B4E5C1FD0CB2053E22C39217A4BE29F
+:1060F000F6962A576EDA0AA23E64DDC91E23D386BD
+:10610000AC7BF35E4B183CD59B1AD6FF073E25AC03
+:10611000DDE6CF0E6BCF3F610D830BBBA787F59FED
+:1061200076DA1E06DFD25716D6FF8717CAC3E0C13C
+:106130001C38CF3076C7901E4A95C2FACF514C61B9
+:10614000F3CFCB8E0F8307CDE27E841DA8DAA75F45
+:10615000D8B81D1459AAF7FB136BF83AAA5FFCD301
+:10616000E9E1EBCDB787AFF75DF1B21BEC7E2DD83F
+:10617000F57B413F62F902D8FF5AB0EBDBC0FE4726
+:10618000F825B0FFB1F482FD8FF5AF80FD8F703B35
+:10619000D8FF081F047F05615F531995879ACAA924
+:1061A000FE46F7D725D63D21D63D29D6FD47EF49F6
+:1061B0002D9D6593345F009FCE4CB8A847396C6F16
+:1061C000EC2BC538C0C05B32DB810CE2F09C684A26
+:1061D000447D348AA1DDC2CA07DEC63845FD818907
+:1061E000968D0AEAA1FF7C07DB03EDB282F2FCA8E0
+:1061F000EF83589CE7CA17C087F938EE8358F48FAD
+:10620000EBBE64046F847605E039FB4130903D03BA
+:10621000720DFB67AAB047CFA02C6FDBAF477CD4D1
+:10622000EEDD4FED6F7975E1ED7B5BC2DA2DD81FA6
+:10623000CA5AAD87FCFB4B3E753E3FF5AFCB94ECA5
+:1062400068175FDAFB9FC9CBB05FDBBBC9F77DCBBB
+:106250007D7F72F0C51C94EB4ED0C37E73701E67B9
+:10626000874EC07CDF7599FB4B135011B4496C12FB
+:106270001457D826B60AE45DADAFB50EE5506DF6FD
+:10628000221DCB207924E20D206DD15E42E71EEE67
+:10629000EF8AF7D3D8FB60DE37BCC76FB723FE3A6F
+:1062A0008FC5E2BAFDED72983F73771EB75BEFCEF4
+:1062B000D313DEAEB41F8B55A07D83F718BF6FAD2F
+:1062C0009FCE7D54C0FD50D23DFB643A77F5171A3E
+:1062D000BA7F75BEFBF3649A678E6F520C9EABC794
+:1062E000CBD773E529B4CE9CCCA595B8FF93A90B69
+:1062F0000B65B2F34030A35C9D32AF15E303B55E8E
+:10630000D93E9CBFB546CCDBA5E374F856E6AB5D41
+:1063100063803E4E968DB291CC17FD7E93C7EDF112
+:1063200052BD2313F5428F5989413A7EB86C620CF5
+:10633000E2F52896585FB653EF80B2A69DAFD763BB
+:10634000E98E457AEB69CF97D16E51E75B89EB1601
+:1063500086D0F510DEDC84A72A4F8B19E709E28F7F
+:10636000D7BBF2B81D7ED2F3EE5D68A7F464475B3D
+:10637000112F5D7A46FE6D2DE015F5414F675A0BE2
+:10638000DE83BA9E4BE0A33F5B43780DF874A2DF37
+:10639000A25616D64FC7F1B52B7C3F16CFB97F5BFF
+:1063A000847AE959B0ABA1BA4ED7908CE7FF787BDD
+:1063B000F8FEAAC43DD7E9FCC9C921F45AD731C4B3
+:1063C0002F66A2EF0E953F14C2A78AC79E6C6EB7C8
+:1063D000F5A41A3CE82FD6ED6F25BABE3EBED39D7C
+:1063E00081767EDAAF8D1437BC913FABDA01217E26
+:1063F0000F433F4E5736B1503321A8EFAFD9EC2FA2
+:10640000E615A23F544EFE5E0F1B5886CADF897602
+:10641000701CCADDBF3D85EB0EB683BD07EB3A8D20
+:10642000BEB91F829D35680546817D0F6ED7798480
+:106430007F6246FB7499B04F3F561C4532E857E7E0
+:106440001A0D9DAF2E278ADBB5424E7EB23FE3A7E1
+:1064500048AF7527648B11ED50F05B086EE3764111
+:10646000BD37E3DF67A0BDDDA6233B40B53B9CC243
+:10647000EE382FECD9F36B06F464AF1E96D813B048
+:106480008F2ADFE6AE346877E6CC257BD529B75175
+:10649000FC71F9D670BBA0DA130ED7EE0D879D11F3
+:1064A0007683EAB7F5E40DD90F93D1FF289167A45D
+:1064B000201F7C2CF0A9FA232BA75A5390DF3768B2
+:1064C00095B96A3C00EFC975F8D56ADCAFA72ECA4A
+:1064D0004A7EC1AA43749FFD9F71BFA33F9571FB84
+:1064E00088F17BEDF771FA76E924EE6700B9D27C8A
+:1064F00046C9B3069AFADD83B12497182B437E6808
+:106500005CC8FD483BC65CA1DC9727E24511FAF266
+:10651000566D9F1C1F221F3ECB9B40FB2FD633077F
+:10652000EAA9953156D25BE38DDCDE2E59EDB5211B
+:106530001D8C07FFD81012CF1E6F1E90B0DFAE87E4
+:1065400078FC5CF5EFE76B2DBAF810BD0792276C6D
+:106550007E90247CFC8DE6B7C0FCE6E0FC70DF7129
+:1065600078DF9F1658491FA7CF67AC9BF8B181F819
+:10657000513DCF15A0B362A0338C9920DEEAB61F3F
+:10658000A138B09375933F521ACBF7518AFB41382B
+:106590008A97967C2E37CAF3F9BD350B58955B6FF9
+:1065A000E5DBE3F3A1DC9BEF48CAA77A0BD1E54A10
+:1065B000412B60A7A4F40D23771BFFC2FDAA4F81D6
+:1065C0000F90CFEF699094CC303B88D3B78B57B105
+:1065D000CBCCDB3B03EFC16DEFCE4E463F8AF3D50C
+:1065E0009255262533844E5D48E7702F5596EA1F55
+:1065F000A3DDED5895AC60BCDF85743F01AF91D34E
+:106600007522FC43FFE23A3AF786C3F0B71DE9ABC7
+:106610009E19ACA8475CBEC876AB16E33AF9F9C040
+:10662000073707F9205DD0658B43F2A0DC6FF94A8C
+:10663000CBE3588B258A5BDD09954897F487FDAA43
+:10664000667A70FE3B01447F886D4924BEA1469066
+:10665000233F17E7BD53EB3F827C7C5CE7CDC078DE
+:10666000CA7127CFEB2C646070807C59CCBAA9EC3E
+:106670008DAE3FE0A7C9DDE3D06F7ECF61A0384E7D
+:10668000CBDA1D31284F73D95ACBF96C54EE6CEF2D
+:10669000B5FC91ED0A2024765EC50BC5853611FE4A
+:1066A00055BCEECDB7CF47FC8F34BEF6AF076E4773
+:1066B00097A2F681567D0A279BEEECA220FE5CCCC9
+:1066C0009B8DFB55F135843FD8F358B887056CA0F6
+:1066D00008FD1A156F46F8371CDED4FB4CD70DFCAD
+:1066E0000CAF0CF412C997487CAAF75BCF1A743C24
+:1066F000CED5F0CE42E87FF75A8D82F6E175F8BD2F
+:10670000011EFC26DEE48F91C8DF1C092F2A3E54AF
+:10671000FC9C8EE7E34EDF23539CEEFF355EDECA22
+:10672000773CFA6DFC18C97F23F1DB9255117C1977
+:10673000C17F2ABE1CAB6289CF543CD6298CFCD6C3
+:10674000BACE18AB8705F167867F883FCC53503CA3
+:10675000A65D62CF48DF850FFB28AF11891FA00D12
+:106760003BCAF59D11FCA7E26D24F9A3CAAF33CC57
+:106770007FDC22517E80F3E7AF0C1ECC2FAAF901FB
+:10678000350F704CC8BFC8F20CD81D9877D998DD6A
+:106790009384F65AAF5E9D87E71FCFACE91EB70220
+:1067A000C69F99C9CB5EB4D342607B148FC39D1939
+:1067B0006D70E3BD9D9126CF423D7E46FAF5ED1CFE
+:1067C0004ED12B082F4C996501B857A7C6ED1E1660
+:1067D00072D843E59985D38AA99FC4DEC4FB5024AF
+:1067E000564EEB48524219ECE7CC0393F29A59F01B
+:1067F000FCAFE4737BD62BE4F9501CFB3712C5B118
+:1068000097800AB060BC7DD6D36513A0FEEC8313DD
+:106810006D94FF6B0C5F1FF56806C50737D37CB717
+:106820007E31A05B9A13DCD790FE2BBECAEB2B27E0
+:10683000913F512570684F98CCFD58CFC438D4474C
+:10684000AA7E1A3CF1AA39347E7911F417D387C095
+:10685000931F4F0FD56F4776FF3E0BE7A9D2BB734F
+:10686000AD507FA1E50FE9680754ED7E348BECD283
+:10687000DD1BB2D0BFA8DAF1FB2C3BC1D10EF26F09
+:10688000B4FCDC97F7DDB27363881DFC6021F70B65
+:10689000161B8F94A07D3AF7E64F1EC178F8A40727
+:1068A000258A8BDDC3BA1F41BD5991CDF9886D3161
+:1068B000925C87F928EFD83AF927BB509E9FCCFE0F
+:1068C000405709FD4C055ABA8F0AE6792C05E36159
+:1068D000EB258A8705FB8FA33CE6D2B5923E3511A6
+:1068E000F561BC4D56705C3CEDE3DEF5B62EACAF09
+:1068F00058CDEBE71A3CED3D38CFD37A6BAB821322
+:10690000954F280FC90B9B0AB8DFB5E43189EC71AC
+:10691000759D494F25B7849ED35420F4F98C6EE2BF
+:10692000FF9F0ABCFC78F5BB6FA62A984F72C4156E
+:1069300040FB3B4F9ECF44F9559C703107E97C9258
+:10694000DEF14C359E7B8781E28705B969720AF4D6
+:10695000CFFBE5CC27B05CB27AE933D51807DD6A06
+:10696000243F4ADD5FA3A468D0DF3CD6F28B7BF1E5
+:10697000DE2E3C69243BBAB1E5A614360C9FAAE58D
+:106980001EC0BF92C5D8F34D462A5F6CB230058E4B
+:10699000B8AF2995E0979B142AD9024E5F8DC25F4C
+:1069A0001D69BE7CF0F715905705EB613EB0376D61
+:1069B00026FB143CE7A429CE1D1BC4B926C1789B35
+:1069C0003B6336DE43C186155D688A2617F0FCE21C
+:1069D000DB3DEBD3C98E5E7DEEB96A685F5A509E8F
+:1069E0005F00F76DDC7E95FCFC631D8F56505C7F6D
+:1069F00087819F4F9CFBC2935929CF60DCF52D1DE9
+:106A0000F9DFAEEDE79EDB00E57D8FADD087D2FBF1
+:106A1000773DAF4DECE7467C35D23D7C7FBEFA7DBD
+:106A20003AF1CF0EE0AB9C7F9CAF5CABD7D0FD3D85
+:106A30005A507E37DEFB059D3B1DF9E9C2E41F116C
+:106A40009DBB0F4B74FFAA1C57C72F10E7ADD5781D
+:106A50001F237B50C8F1CFC1F3C3FB3DD2F17116A8
+:106A6000DAC39FFB167EEBB90F3661061DE35A466B
+:106A70002A23DB8BF48E8956385F9186DBC191ED3A
+:106A80000F17A871719E6FC73F8C0BD709FDE98462
+:106A90008DC525A0FE93FC51B998E7B8EDA216FD6F
+:106AA0002FF0EBDE0FB72FD9FB217A7CA4FDDEA8F7
+:106AB000ACC779B441B93BEDB486F943F4F62D7D0A
+:106AC00051CC1FB2EE90DF01757ACCB3748C26B92D
+:106AD0008078C3BC4CA063F20E842FEA391E0307F2
+:106AE000C1BFE27115261705CF79B1E3722ECAD95D
+:106AF000C8F3D61FBA4CF451E77BF4AA44E79F735E
+:106B0000519B7BE3F31FD97D3917F17751D7578418
+:106B10007E5440DF978B78A87F9DCBF3EF7B0F6A85
+:106B20007DF57A3D8FEF4916F2074BE42BE4C7075A
+:106B30004E703FBEBE6327C9D3C14E1E4F7169BAA6
+:106B40004B5330FED070AE0BE5D9602AF7AF607EB4
+:106B50003BDEDB8C89420F6A07D2E7835C3B2AF27B
+:106B6000B5AA5F7701F9578FF378EBE83D526E34A1
+:106B700043BBE212F233D457ACCA5887747EC19338
+:106B8000849120F676EEFFD453FCED8D688B4C7625
+:106B90002BD486E06FE81C1E993F9C61AA9F1ECDF6
+:106BA000EC21FD5C7AE5A7E41F9FE47932D714CE8F
+:106BB0004FEC10E727E7DA23FAD490F95E52E58725
+:106BC000B01FE7BEF13FC497A76CF65328CFA25180
+:106BD00016E27CA9711E4912FD8A82794073A7F0E2
+:106BE000C7CB646A77F964361AC7A4C650BEBE8C98
+:106BF0006DD2A2BD3B977967F077327DFFF643688F
+:106C00009FF7869C8FEFB1C07EA6FC71699423B379
+:106C100011ED238D24EED55B303F549F15727B6BB5
+:106C2000862C911E1B181D4D76CA9C05CEC5B85FDB
+:106C3000B55F9996EB339887EC2CE619C8C57C268E
+:106C4000F30FE4629E53ED77D71BD10DA41799B7CC
+:106C5000E0AE9075C61472BDF929E69F419EB84416
+:106C6000FEB344FEEA29F4A31A0FF33C61AF26E316
+:106C70003D7CAFE5867B46BC5E06BCDA51FF3898AA
+:106C8000DD8EFC3335C983FCE3DA27317CB756DF70
+:106C900061D881719D7A5D5F32D2F306DF5FF5487E
+:106CA000CFAE03EFEA95A9389EC781C05ED7E0FD5D
+:106CB000BA84FE72FA6E7A0FE36ECE135C8B3AB52D
+:106CC000EF925F5FDBBE9FFCF73AE627FFBDAE2D7C
+:106CD0009C5E0653799C3D923FC6142A617C3167C5
+:106CE0002BE78BBB64D680728E89B8E99CD414B232
+:106CF0004782E3849D285F7E04ED97FE09925582CA
+:106D0000A9FAA3DC6BD12E7267717BA6FF4F2F16F9
+:106D10002C23B9E229F819BE8B11F6EE9CF59BB530
+:106D200072C87EE674F238617F14AB3A48F8768C0C
+:106D3000453CA4E7958F2DE4EF6472E99D8F86C7EB
+:106D40003523CFF1AC88E39CC4384F4E70DFF3D2CB
+:106D5000D2B81C631EA29F2E0D5F5F7DF7A28E5FCF
+:106D600021E869C81F92787C6A24B98279944A9193
+:106D700047A91479944A9147A91479944A9147A94B
+:106D80001479944A9147A91479944A9147A914799E
+:106D900014AC3F895BA5F7703B9F417AE8421E1B0C
+:106DA00013847B1322E031E1FD7B13A470788C44C3
+:106DB000FD8B0B773EE3CEC138A645C8252506EDF1
+:106DC000AF0B261E5FEA8871CC2D84FACA39CDBB81
+:106DD000F97B443BBD67294E58B818F96B30D1C0D8
+:106DE000500EB90B1DF3111F274ECCCEDC4CF2D147
+:106DF00064C53C77EFDD37C7515CEE2D99C9B0E42F
+:106E0000CCECFCB50500CF344B44B720277E50AE08
+:106E1000FA9330CFEC4E9ECF2891EB2A71FEC6D16B
+:106E2000A67C8A6BE53B161586C40F4AC72CCF4457
+:106E30003BA84BA7BC87F154F75F740CFD2835FEC7
+:106E4000A6F6EBCD9B598DFB9A933D716D1ECA1B27
+:106E5000602E946F763D6BC37DD935D15233C92BEB
+:106E6000458BFC5F2DF03D4BE1F6B05FAF6813D072
+:106E70006F8F9A99E85678BEAA52E4AB2A45BE0AAB
+:106E8000F1730AE36650BE03F55876433D9691EFE1
+:106E9000B9761794AF24BA6503E9A1EFC1E6225F82
+:106EA0007139938EF4FC8288C367178A7769F9E594
+:106EB0000FF2715E9AA756C4DF2EEBC2F378EAB8E0
+:106EC000E07846E51D3FE0F299C5E9F97BD7B1CC02
+:106ED0008DEF69EF786D34C593021E8D5B17073017
+:106EE000F038CA2FF61AF76F592AE7973B5E4DA183
+:106EF0007ECD220EEA4CE8CE4A40BD2BF84A850FE3
+:106F00007EC3DFF938F30086F275899FCF79477722
+:106F1000563CC001C9A4C1F8B873076FEF117CE7F4
+:106F20009C20E613E761466F3AE2A3FFF06BE9F7B6
+:106F300002BCD1EC5FC6E5BD3F8BE434F367E17B77
+:106F4000A1CB92F72CBEB7FDF5C17F5984EF6B2F13
+:106F5000EBBCCF21FCDB8333382CED3F6B096D4F4D
+:106F6000F2A6E37BDC5F1FFCE1227C9F7B3969FF9B
+:106F700073F1D61058F7CA596CD73F3C635131F4BE
+:106F80009F67F09C6842BA7999D39769DF81F3785B
+:106F90003FB51DDC5E9FB5EFC09557501F1F88A100
+:106FA0007CBDAF3083EEBBB963CF63486F81FD3AE0
+:106FB000E2838D6D7F7DEEB7D4CF40619479066F0B
+:106FC00001865CDC457FBB1BF7352FDAFB19C29BC2
+:106FD0008B6EA37DCE1BC5F9F9A9A2B98B903F0397
+:106FE00007F6FD0AF96F5E1C18B2B89F174D849F13
+:106FF0009A572717631C2010D35D81F3D7BF60B069
+:10700000229DD6BC9A320BE302C70B797CBA7ACAAE
+:10701000A674D4AF9A43CFEFFE2DC6295F30517EC0
+:10702000C695C0EDBB1AB9A56805E16FE76E7C3760
+:107030001278DE4479D26A9803D7ABDE3D89E2EA62
+:10704000AF7FFD4105E2A144DEBE1BEB3FDB65D215
+:10705000E03DF4E8ED713F423EECD1919F592DE0C7
+:10706000EADE517C3FD17DA584BFC44DE9A85F6BAA
+:1070700046FDE676DCF73C79D373E8E7B03D06CA17
+:10708000155C7C1EEE0DC65D6CD5D12BD5C0F331E1
+:107090005AA497CBD2A68A6770FE56DEEFB2691368
+:1070A000DDA7BBF52686EB413F86F2EAB2B439ACE8
+:1070B000FE62EB9E5CF4432FBD308FFC5195CE55A4
+:1070C0007EA9D96508D387240992C57B0952B36E7E
+:1070D00066063D5B2DC04B07B7059E61C1F197DA8F
+:1070E000747E3DDC51B581ADC5F7C12A3FD4A4DD26
+:1070F0005686E7ABD1B464A1BD529DDF57817C7148
+:10710000D1C48CA9F88E4EE8AB9AF635F3D1EE1DBA
+:10711000693FB1E25DDFE7820F3FF7993CA1F9C11A
+:10712000C8F26F4D4C3915F26EF89E0603D9EEEA9F
+:107130007C6FEBBD75E89FD52770F97116FAB781A2
+:107140001C331771B9B76455787FA988BF4BACD78A
+:10715000F765A1DE53E7FFA650956B7D5928AF2256
+:10716000C7CD9385BC7951227953D32E9D93E19E4F
+:107170006A8C6E0FBEDFA94167929F537B4DE2E39D
+:10718000528BC4BDC3D8A78B3268DD9A3693DD0419
+:10719000E36AA3FA62D11EAA8BE98B453B277048AC
+:1071A000663B04BA1293057E26089485C41DABBDC8
+:1071B0003ABB2977183CA3DD84EF73F0BF61FDB6BD
+:1071C00022CE2755BE685A8F59FA8A904EABB687A1
+:1071D0008FC3735942F82FE0DB991CEA8FDBC4BEE2
+:1071E000FBA573C427FD5FBF9F8E78AFD1B0B59864
+:1071F00047BC24F1EF1E00A6EF1E2E897C64CDDF74
+:10720000CD51482F973EAF23BE0D487D24D7CE1CCD
+:107210005C407229A0EB23B9D6535441F22110DF10
+:10722000578172EACCC17ADE3EBAAF4281F64E8413
+:10723000B17D1C237D7FB9E801921FF364FEBE81FE
+:10724000EDD459781C687D6F13F9153A25D4EFBE3B
+:1072500052A4E66DF4C173CB41BE0930655F3BF2C9
+:10726000619599E239603FB5BD8276DEC2642BC676
+:10727000C5AB701CA7037D68FE2F31E1CB65889FED
+:1072800045718E3B8B308F9DD347FE035035D9E936
+:10729000F57F32901FD9AF1BD88D722A37CEB1B08F
+:1072A00008F651A7EF5E87A1A72BBABE2ECCFBCD67
+:1072B00095B93C627B385D057276F2EF2444FEB0EE
+:1072C000BA88CB5FD05BAC05E942E2F83DE67BF5DE
+:1072D00014CA9540F74492C7917C73D1F7442CCAE5
+:1072E00087D3A0C7DD217EFEE9A57B284FBF00DF45
+:1072F000654079EFDA707A18FCEA67E4EFB1C742CB
+:10730000EA910EB784C3917484F4E80F933B6EA2A4
+:107310009B3D82AF6A6775D7E33D0CC177002C8730
+:10732000C04723E088FEAC9CDB097BF0BF61DEBA7E
+:1073300071FE5EF2CFF7F177B1CDA0BF083E104DE0
+:107340007963CD3ED04F895C3FA15EA88DEDA6B894
+:1073500054E08081F2230F777C4CEF19810E29FED7
+:1073600052DBF15A32FAED3EF41392480F26D33B2A
+:1073700095031DC9E86FA8F5751A6F96788F4F763B
+:10738000BA5AEF94FD59B8FF5AA93B17DB7D851611
+:10739000D11F60196146E7A89338BFB30E99E4790D
+:1073A00024DEF60A7A05B9904BEF2C0EF1B8802A4C
+:1073B00007AA853C398AF5399CEF2D6A5E49C2F7E8
+:1073C00072D1C3CA879B8A547BB881E236BB8A14C8
+:1073D0007EAF623CCDCBE34AD45EFFFAE5DC0939EF
+:1073E000384E11E342E4D0C4A05C41FE4F25FE7F3D
+:1073F00058970CE7AA794EB236A39C5ABCA614BA89
+:10740000B3E5DA15A5142F13EF3F23F7154947F617
+:10741000228EDF1A4D7C4962C87C97C05D4FCD2318
+:107420003943EFE8EF4F7CBC14E313BF58BC99E835
+:107430007948DF84F2399E673B97E3C836D734D763
+:10744000D3F1F286967529C3EC23729FD58E96D21E
+:1074500064E5FA7A75BF974CEAFE66E99242EF61FD
+:10746000C19AD22428971BFFD17BE0E7BDD461F0FD
+:10747000A35EAD5EBC625DDC3074739D3ED81EA21F
+:10748000BF26207E3D94D71869FF91659DE4EFC526
+:10749000381103BE6A25FE027E09D10B6542BF0E7C
+:1074A000C51BAA968E47BF9339968E473D037C55E0
+:1074B000611DC6AFC42F4B34F476C34D65E47E3EE8
+:1074C0002BE271D2B222CE2FA76CF66F50BE8EF493
+:1074D000BD85619AF4ADDF5BA46906DF417E4B4B4D
+:1074E0008E51300F54323B9AF73B6CB260DCA6FFF2
+:1074F000F09714D7ED7FC4BC80E70BCC6C34B47725
+:10750000A54EDD11AA473CD3385F461770BBC59521
+:10751000ADFBF6B8504ECC505C88EC869C68CA93A4
+:10752000047C9F92DEEAEF2CB4603E23D00DDE2176
+:10753000F093EBEBFF4A46FD1AE8FC88DE8305BEBC
+:10754000FA98DE896D10EFF48EFAC43BAB6E258697
+:10755000BE8B2BFBA014FB6D1465303EC0E35A6A52
+:10756000A9FAFF21FEEF946985C3FABF090E73687B
+:107570005C4049192E8E121A17C8D4F2B80096181A
+:1075800017C8CCE4710184312E8025C605B01EE3F6
+:107590000208635C00618C0B208C71012C312E8001
+:1075A000F59F89EF1FFA4130F178A599E4FA4A7CFA
+:1075B000DF0EF7B7F230CF3BAD6C95297F8BDF3F05
+:1075C000A07EBBEEDD4CBB7837E3DD4C793CD701C8
+:1075D000D98A2872E9068E631CC7B55FB2AE41B97D
+:1075E000D2B480D6DFD059F8DE62AC6FD559350AF7
+:1075F000D111C7638B44EFF46B3A5B29EE549C7254
+:10760000584FF56D12C338E95D06EEE73A65A8CD2F
+:10761000A33C28D9C14E4337F91FB57B25A532F4C9
+:107620009DC6F4AB2407D47CF232DEC49C5E935238
+:1076300039CC3B90A177E7E2DDF432CC33E37B71C8
+:10764000F92B7AD7EF04877414D2E156FEFED902E3
+:10765000FF88DF23DE35D574EE5F87EFA122F3CDFF
+:1076600043DFD345E49DEBA789BCB28D7F5F51F624
+:1076700064E5BE03B0DEE02603D91BEE42C703D3A8
+:107680009230EF6FA7F8C8F1C326F28B3EDC7C5333
+:10769000587C84E53B1E9C46F9F9B114AF68D44987
+:1076A000A48F67974D4CC17B9C7D42477AA737AF2B
+:1076B0007C35F66B9CAA503CAAC4C01EA079C47B42
+:1076C00029151F25CD924703F05266A577F64BE0AA
+:1076D0009A305ED9AF33AFC7774D4B187FE7A0D252
+:1076E0004DE36689E8060304789F15E23E9774FE31
+:1076F000F94B7CC7709F81DBAD691A9EBF4EDBC81A
+:10770000DF33DCCF1C7AD4B3CB91BA64D28F7FEA5B
+:10771000837A47F4D8746E972B2938FFD2933A7A3C
+:107720006F5B92F2932C07E9E9627AC720F917C9D7
+:10773000D76E1E997F22DF311CD771B902F748FE40
+:107740005017D225C5651C549E6CAAA2F277E27B25
+:1077500088EBDFFF0F9C453F312D25C68A726EC432
+:10776000EFDDA2BEFD7BAF17C4FBB5344D4FBE822B
+:10777000F7F177B315EF437D2778CA56BE1FF16442
+:107780008F656E0B7D0F061210EEB5140F22615C33
+:10779000DB6BC7EF8E060E4B167A977C9D7CDCFC6C
+:1077A00008BE1371654A1649C1F8F7A69264D877E6
+:1077B000E9840CDAB7CBC7E3A37443C9183FE7F8F1
+:1077C0004ACF731C9B5618AC9F27F82600FD399DA5
+:1077D000FCD083F4F61DE2A6BBB0BF9B99E87B6AA0
+:1077E000FA83FDCCBB791CC54F55BA196C4BD981B6
+:1077F00074F39E90FB8B17BFAB43FDDF9BEFE8C19B
+:107800007D54545E7D2499CE377CFC4A7DA71E1999
+:10781000BF0A959FFF3FDEA79F6A6AA0F29DA6550B
+:10782000547637B9A93D44FE5F1A41FE47C63FAFC3
+:10783000227F47C63F99518923FD09FCCDE3CD1135
+:10784000F1CEB251F7AE87FB9BBD456FC52A35FE21
+:1078500089EF87579A491EFCF7B461E39EEABD9908
+:10786000294E3AC84C7978FFB3B2276A35D0AE9D1D
+:10787000CEF1A7C61D913FF07CC81F58227F68B586
+:1078800041FE78560F2C5CC0F5BC9BF4BC89F0BA65
+:107890006E0DC80F80EF639630F97125427E80C36C
+:1078A00071377D57D56960182754DF51CE82E28B3E
+:1078B000BC61E48997CB937151DEE7E97BFFFA283D
+:1078C0007A9F7B5CBC873BBE81BF87AB64E5B4EE2F
+:1078D00030722516F171DFA881B37F80FEF7FDDEDF
+:1078E0004CF6CABAD1CB8AFE19B9724D7CD7F234A4
+:1078F000FEAE80F6DB7E57E03109F3A18DF7301B39
+:10790000E259FD5D811491CFFE1EBF2B306D7AE1EF
+:1079100077FF5D815BA78F5F1CFABB02B7FA323835
+:10792000ACFEAE001BBF7884DF15983D3DE9FADF61
+:1079300015B86D3AF71747FA5D01B027CB705C9226
+:10794000CD3E07CB34B1CFC8EF694F8AFC5D97C6F7
+:10795000B118CBD258B796EA359E02FA0E5EE3FD17
+:1079600025F981F98E9FE3794B9FB04DC90638CD3B
+:10797000E02539D99B67BF13EBAFD9EC77E13A919A
+:107980007173C42DFAF7B09FBBB13DF2DD958ACF7C
+:1079900015D3B9DC6814E58CE6E1BF276F9CCEF304
+:1079A000F237DA37ECB706D71BDAFFA6A505B81F02
+:1079B000D86F2DD6C37EEBB064E684B0EF53AFA78B
+:1079C0003337D155E3744E5F20CFE67DC8ED412AB1
+:1079D000B3B49E78B41FC73CE489C7FD8E691930E3
+:1079E000E177107F740F9850BFFF71F58009EBFFAE
+:1079F00068E7EF9523E77F793AF703B2660CD0F892
+:107A0000F168E3937D3E108FF65356D587EB28DF60
+:107A1000B27732E997F142BF8C7F6882AF0FE86D91
+:107A2000FCB638CA67B3E2446AAF31723EAD79A89A
+:107A3000F2E00185BEDB9AF76188BD33D903FB0E06
+:107A4000B3BFB483FCDD25C0784F7B750423CDA282
+:107A50007DE564FCDDE5182137D04E5B0C72C15921
+:107A6000F5E69794F7C7F1381FE66891FE7CBA41B6
+:107A7000F17D9A05FDD0E50BD674915FB875A85ECF
+:107A8000F899FBD7A1DF0CF65B587D4DE5912ED41C
+:107A900037B57BC3EB9D0D57C97F05FB2DACFE9E13
+:107AA0005F9ED3F3DF2F08AF07FCEE45BA54F17B9E
+:107AB0005CE79D8C7EDE71679495BFDFF7D2EF9512
+:107AC000EC10DF3FEFFC8F599C6E04BE61BC377435
+:107AD000FCC8F4D14CFDDDB35836F2C38D4A552EA7
+:107AE0000DFDFE899EB929BE373786E48E4BF855C9
+:107AF000F59516D2F369F546925F25729415E1A1CA
+:107B0000DF3F2993859CF212FFF7DC1E4F713C3A50
+:107B100000C2095329EF93DCCCE1812403C9871209
+:107B20004D79DD1E28DFD4847FC7FE2CCA0719F9E2
+:107B3000977F87E9D27BF977E25AA510FDDC66C909
+:107B4000BE0DBF7B6C96441CB1DA4CF9827E8C2F43
+:107B5000C279B6C47BB62D8375B6DC9943F6713F06
+:107B6000E3F2D4BD80E7ADB6C4972F5E81ED0BA7DD
+:107B700050FBC16F263E5E80F653759415EDA72D20
+:107B8000366E5F6F999F4DEDAF4BCA1A3CB7FB2124
+:107B900046EB6C99CFCFBDE5F171E2FB0B8F09F994
+:107BA000794B8B7D34E6A366591C17105F63443E06
+:107BB0006E4B06D443F99454BEF07E9C672ADFEFE7
+:107BC000EF6C0AC98FE30BA73CBE5B2135E2C7BC53
+:107BD000906B6E0CF9C1FF0BB81F749470470000D6
+:107BE0000000000000000000050207000000000087
+:00000001FF
diff --git a/firmware/bnx2x-e1h-5.0.21.0.fw.ihex b/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
deleted file mode 100644
index e78c863..0000000
--- a/firmware/bnx2x-e1h-5.0.21.0.fw.ihex
+++ /dev/null
@@ -1,12855 +0,0 @@
-:1000000000003BB8000000600000068800003C20B3
-:100010000000192C000042B0000000AC00005BE0C2
-:1000200000008DC400005C90000000E40000EA586D
-:100030000000E4140000EB40000000940001CF58E1
-:10004000000058E80001CFF0000000C4000228E0E2
-:100050000000F978000229A800000004000323280A
-:10006000020400480000000F020400540000004594
-:1000700002040058000000840204005C0000000636
-:100080000204007000000004020400780000000078
-:100090000204007C121700000204008022170000F6
-:1000A00002040084321700000604008800000005E6
-:1000B0000204009C12150000020400A0221500009A
-:1000C000020400A432150000060400A80000000489
-:1000D000020400B802100000020400BC001000007E
-:1000E000020400C010100000020400C42010000030
-:1000F000020400C830100000020400CC40100000D0
-:10010000060400D000000003020400DC0010000020
-:10011000020400E012140000020400E422140000B3
-:10012000020400E832140000020400EC4214000053
-:10013000060400F000000003010401240000000098
-:1001400001040128000000000104012C000000004F
-:100150000104013000000000020401D00000890603
-:1001600002040004000000FF02040008000000FF79
-:100170000204000C000000FF02040010000000FF59
-:1001800002040014000000FF02040018000000FF39
-:100190000204001C000000FF02040020000000FF19
-:1001A000020400240000003E0204002800000000B9
-:1001B0000204002C0000003F020400300000003F59
-:1001C000020400340000003F020400380000003F39
-:1001D0000204003C0000003F020400400000003F19
-:1001E000020400440000003F020404CC00000001AF
-:1001F00002042008000002110204200C000002008A
-:10020000020420100000020402042014000002195D
-:100210000204201C0000FFFF020420200000FFFF5A
-:10022000020420240000FFFF020420280000FFFF3A
-:1002300002042038000000200204203C00000000DE
-:100240000204204000000034020420440000003575
-:10025000060420480000001C020420B80000000131
-:10026000060420BC0000005F0204223807FFFFFFE5
-:100270000204223C0000003F0204224007FFFFFF6F
-:10028000020422440000000F010422480000000084
-:100290000104224C00000000010422500000000074
-:1002A0000104225400000000010422580000000054
-:1002B0000104225C00000000010422600000000034
-:1002C0000104226400000000010422680000000014
-:1002D0000104226C000000000104227000000000F4
-:1002E00001042274000000000104227800000000D4
-:1002F0000104227C000000000C042000000003E840
-:100300000A042000000000010B0420000000000A85
-:1003100002050044000000200205004800000032F1
-:10032000020500900215002002050094021500202D
-:1003300002050098000000300205009C0810000033
-:10034000020500A000000033020500A400000030F8
-:10035000020500A800000031020500AC0000000208
-:10036000020500B000000005020500B40000000610
-:10037000020500B800000002020500BC00000002F7
-:10038000020500C000000000020500C400000005D6
-:10039000020500C800000002020500CC00000002B7
-:1003A000020500D000000002020500D40000000198
-:1003B00002050114000000010205011C00000001FB
-:1003C00002050120000000020205020400000001F5
-:1003D0000205020C0000004002050210000000406F
-:1003E0000205021C0000002002050220000000138C
-:1003F0000205022400000020060502400000000A59
-:1004000004050280002000000205005000000007E3
-:100410000205005400000007020500580000000813
-:100420000205005C000000080205006000000001F9
-:100430000605006400000003020500D80000000665
-:100440000205000400000001020500080000000190
-:100450000205000C00000001020500100000000170
-:100460000205001400000001020500180000000150
-:100470000205001C00000001020500200000000130
-:100480000205002400000001020500280000000110
-:100490000205002C000000010205003000000001F0
-:1004A00002050034000000010205003800000001D0
-:1004B0000205003C000000010205004000000001B0
-:1004C000020500E00000000D020500E80000000742
-:1004D000020500F000000007020500F80000000718
-:1004E000020500E40000002D020500EC00000027DA
-:1004F000020500F400000027020500FC00000027B0
-:10050000020500E00000001D020500E800000017E1
-:10051000020500F000000017020500F800000017B7
-:10052000020500E40000003D020500EC0000003779
-:10053000020500F400000037020500FC000000374F
-:10054000020500E00000004D020500E80000004741
-:10055000020500F000000047020500F80000004717
-:10056000020500E40000006D020500EC00000067D9
-:10057000020500F400000067020500FC00000067AF
-:10058000020500E00000005D020500E800000057E1
-:10059000020500F000000057020500F800000057B7
-:1005A000020500E40000007D020500EC0000007779
-:1005B000020500F400000077020500FC000000774F
-:1005C0000406100002000020020600DC000000010A
-:1005D000010600D80000000004060200000302200B
-:1005E000020600DC00000000010600B80000000068
-:1005F000010600C800000000010600BC0000000069
-:10060000010600CC000000000718040000A900004B
-:10061000081807C800070223071C00002C2D000043
-:10062000071C800038A20B0C071D000028EF1935AD
-:10063000081D681052FE022501180000000000008D
-:10064000011800040000000001180008000000006C
-:100650000118000C0000000001180010000000004C
-:100660000118001400000000021800200000000122
-:1006700002180024000000020218002800000003F5
-:100680000218002C000000000218003000000004D6
-:1006900002180034000000010218003800000000B9
-:1006A0000218003C00000001021800400000000495
-:1006B0000218004400000000021800480000000179
-:1006C0000218004C00000003021800500000000057
-:1006D0000218005400000001021800580000000435
-:1006E0000218005C00000000021800600000000119
-:1006F00002180064000000030218006800000000F7
-:100700000218006C000000010218007000000004D4
-:1007100002180074000000000218007800000004B5
-:100720000218007C00000003061800800000000290
-:10073000021800A400003FFF021800A8000003FFF9
-:100740000218022400000000021802340000000019
-:100750000218024C00000000021802E4000000FF32
-:100760000618100000000400021B8BC000000001EE
-:10077000021B800000000034021B804000000018B3
-:10078000021B80800000000C021B80C000000020C3
-:100790000C1B83000007A1200A1B83000000013806
-:1007A0000B1B830000001388021B83C0000001F4B0
-:1007B000021B1480000000010A1B148000000000CE
-:1007C000061A1000000003B3041A1ECC0001022711
-:1007D000061AA020000000C8061AA00000000002AF
-:1007E000021A1ED000000000061A1ED800000006E3
-:1007F000061A36E800000004061A36E0000000027F
-:10080000061A500000000002061A500800000004FA
-:10081000061A501800000004061A502800000004B0
-:10082000061A503800000004061A50480000000460
-:10083000061A505800000004061A50680000000410
-:10084000061A507800000002041A404000020228F4
-:10085000061A400000000002061A400800000002CC
-:10086000041A62C00020022A061AD1000000000209
-:10087000061A200000000124061AB000000000281B
-:10088000061AB1400000000C061A330000000014E4
-:10089000061A33A000000068061A81080000000252
-:1008A000061AD1C800000002061AD1D800000020A4
-:1008B000061A249000000124061AB0A000000028A7
-:1008C000061AB1700000000C061A33500000001424
-:1008D000061A354000000068061A81100000000268
-:1008E000061AD1D000000002061AD25800000020DB
-:1008F000021A292000000000061A30000000000241
-:10090000041A30080005024A061A301C00000009CB
-:10091000061A320000000008061A5000000000020B
-:10092000061A508000000012061A40000000000263
-:10093000061AD0C000000002021A2924000000009C
-:10094000061A304000000002041A30480005024F29
-:10095000061A305C00000009061A32200000000868
-:10096000061A501000000002061A50C800000012BB
-:10097000061A400800000002061AD0C80000000253
-:10098000021A292800000000061A30800000000228
-:10099000041A308800050254061A309C0000000931
-:1009A000061A324000000008061A5020000000021B
-:1009B000061A511000000012041A401000020259D9
-:1009C000061AD0D000000002021A292C00000000F4
-:1009D000061A30C000000002041A30C80005025B8D
-:1009E000061A30DC00000009061A32600000000818
-:1009F000061A503000000002061A5158000000127A
-:100A0000041A401800020260061AD0D80000000242
-:100A1000021A293000000000061A3100000000020E
-:100A2000041A310800050262061A311C0000000990
-:100A3000061A328000000008061A5040000000022A
-:100A4000061A51A000000012041A4020000202679A
-:100A5000061AD0E000000002021A2934000000004B
-:100A6000061A314000000002041A314800050269EC
-:100A7000061A315C00000009061A32A000000008C6
-:100A8000061A505000000002061A51E80000001239
-:100A9000041A40280002026E061AD0E80000000284
-:100AA000021A293800000000061A318000000002F6
-:100AB000041A318800050270061A319C00000009F2
-:100AC000061A32C000000008061A5060000000023A
-:100AD000061A523000000012041A4030000202755B
-:100AE000061AD0F000000002021A293C00000000A3
-:100AF000061A31C000000002041A31C8000502774E
-:100B0000061A31DC00000009061A32E00000000875
-:100B1000061A507000000002061A527800000012F7
-:100B2000041A40380002027C061AD0F800000002C5
-:100B30000200A294071D29110200A29800000000E3
-:100B40000200A29C009C04240200A2A0000000005D
-:100B50000200A2A4000002090200A270000000002E
-:100B60000200A274000000000200A2700000000059
-:100B70000200A274000000000200A2700000000049
-:100B80000200A274000000000200A2700000000039
-:100B90000200A27400000000020100B40000000185
-:100BA000020100B800000001020100DC00000001A9
-:100BB0000201010000000001020101040000000127
-:100BC0000201007C003000000201008400000028C7
-:100BD0000201008C0000000002010130000000044E
-:100BE0000201025C00000001020103280000000075
-:100BF0000201607000000007020160800000000137
-:100C00000201055400000030020100C40000000190
-:100C1000020100CC00000001020100F80000000108
-:100C2000020100F00000000102010080003000001D
-:100C3000020100880000002802010090000000006E
-:100C40000201013400000004020102DC0000000186
-:100C50000201032C00000000020160740000000784
-:100C60000201608400000001020105640000003000
-:100C7000020100C800000001020100D000000001D4
-:100C8000020100FC00000001020100F4000000016C
-:100C9000020C100000000020020C200800000211CD
-:100CA000020C200C00000200020C201000000204C4
-:100CB000020C201C0000FFFF020C20200000FFFFA0
-:100CC000020C20240000FFFF020C20280000FFFF80
-:100CD000060C203800000002020C20400000003406
-:100CE000020C204400000035020C204800000020C7
-:100CF000020C204C00000021020C205000000022B9
-:100D0000020C205400000023020C20580000002494
-:100D1000020C205C00000025020C20600000002670
-:100D2000020C206400000027020C2068000000284C
-:100D3000020C206C00000029020C20700000002A28
-:100D4000020C20740000002B060C207800000056D6
-:100D5000020C21D000000001020C21D4000000018F
-:100D6000020C21D800000001020C21DC000000016F
-:100D7000020C21E000000001020C21E4000000014F
-:100D8000020C21E800000001020C21EC000000012F
-:100D9000020C21F000000001020C21F4000000010F
-:100DA000060C21F800000010020C223807FFFFFF9C
-:100DB000020C223C0000003F020C224007FFFFFF14
-:100DC000020C22440000000F010C22480000000029
-:100DD000010C224C00000000010C22500000000019
-:100DE000010C225400000000010C225800000000F9
-:100DF000010C225C00000000010C226000000000D9
-:100E0000010C226400000000010C226800000000B8
-:100E1000010C226C00000000010C22700000000098
-:100E2000010C227400000000010C22780000000078
-:100E3000010C227C000000000C0C2000000003E8E4
-:100E40000A0C2000000000010B0C20000000000A2A
-:100E5000020C400800000411020C400C00000400C9
-:100E6000020C401000000404020C40140000042195
-:100E7000020C401C0000FFFF020C40200000FFFF9E
-:100E8000020C40240000FFFF020C40280000FFFF7E
-:100E9000020C403800000046020C403C00000005F7
-:100EA000060C404000000002020C40480000000A0E
-:100EB000020C404C000000F0060C40500000001FE7
-:100EC000020C40CC00000001060C40D00000003AAB
-:100ED000020C41B800000001060C41BC00000003F8
-:100EE000020C41C800000001020C41CC00000001CE
-:100EF000060C41D00000001A020C423807FFFFFF29
-:100F0000020C423C0000003F020C424007FFFFFF82
-:100F1000020C42440000000F010C42480000000097
-:100F2000010C424C00000000010C42500000000087
-:100F3000010C425400000000010C42580000000067
-:100F4000010C425C00000000010C42600000000047
-:100F5000010C426400000000010C42680000000027
-:100F6000010C426C00000000010C42700000000007
-:100F7000010C427400000000010C427800000000E7
-:100F8000010C427C00000000010C428000000000C7
-:100F90000C0C4000000003E80A0C400000000001B7
-:100FA0000B0C40000000000A020D0044000000325B
-:100FB000020D008C02150020020D00900215002089
-:100FC000020D009408100000020D0098000000338C
-:100FD000020D009C00000002020D00A000000000B5
-:100FE000020D00A400000005020D00A8000000058D
-:100FF000060D00AC00000002020D00B4000000026B
-:10100000020D00B800000003020D00BC0000000249
-:10101000020D00C000000001020D00C80000000227
-:10102000020D00CC00000002020D010800000001CA
-:10103000020D015C00000001020D016400000001CE
-:10104000020D016800000002020D02040000000110
-:10105000020D020C00000020020D021000000040F2
-:10106000020D021400000040020D022000000003E7
-:10107000020D022400000018060D0280000000127C
-:10108000040D03000024027E020D004C000000014C
-:10109000020D005000000002020D00540000000884
-:1010A000020D005800000008060D005C000000045E
-:1010B000020D00C400000004020D00040000000145
-:1010C000020D000800000001020D000C00000001EC
-:1010D000020D001000000001020D001400000001CC
-:1010E000020D001800000001020D001C00000001AC
-:1010F000020D002000000001020D0024000000018C
-:10110000020D002800000001020D002C000000016B
-:10111000020D003000000001020D0034000000014B
-:10112000020D003800000001020D003C000000012B
-:10113000020D011400000009020D011C0000000A4C
-:10114000020D012400000007020D012C0000000721
-:10115000020D01340000000C020D013C0000000BE8
-:10116000020D014400000007020D011800000029D3
-:10117000020D01200000002A020D012800000027B6
-:10118000020D013000000027020D01380000002C84
-:10119000020D01400000002B020D01480000002755
-:1011A000020D011400000019020D011C0000001ABC
-:1011B000020D012400000017020D012C0000001791
-:1011C000020D01340000001C020D013C0000001B58
-:1011D000020D014400000017020D01180000003943
-:1011E000020D01200000003A020D01280000003726
-:1011F000020D013000000037020D01380000003CF4
-:10120000020D01400000003B020D014800000037C4
-:10121000020D011400000049020D011C0000004AEB
-:10122000020D012400000047020D012C00000047C0
-:10123000020D01340000004C020D013C0000004B87
-:10124000020D014400000047020D01180000006972
-:10125000020D01200000006A020D01280000006755
-:10126000020D013000000067020D01380000006C23
-:10127000020D01400000006B020D014800000067F4
-:10128000020D011400000059020D011C0000005A5B
-:10129000020D012400000057020D012C0000005730
-:1012A000020D01340000005C020D013C0000005BF7
-:1012B000020D014400000057020D011800000079E2
-:1012C000020D01200000007A020D012800000077C5
-:1012D000020D013000000077020D01380000007C93
-:1012E000020D01400000007B020D01480000007764
-:1012F000020E004C00000032020E00940215002085
-:10130000020E009802150020020E009C0000003022
-:10131000020E00A008100000020E00A4000000331E
-:10132000020E00A800000030020E00AC00000031E8
-:10133000020E00B000000002020E00B40000000423
-:10134000020E00B800000000020E00BC0000000207
-:10135000020E00C000000002020E00C400000000E7
-:10136000020E00C800000002020E00CC00000007C0
-:10137000020E00D000000002020E00D400000002A5
-:10138000020E00D800000001020E00E4000000017F
-:10139000020E014400000001020E014C0000000199
-:1013A000020E015000000002020E020400000001C3
-:1013B000020E020C00000040020E0210000000406D
-:1013C000020E021C00000004020E02200000002099
-:1013D000020E02240000000E020E02280000001B74
-:1013E000060E030000000012040E0280001B02A281
-:1013F000020E00540000000C020E0058000000070E
-:10140000020E005C0000000F020E006000000010E1
-:10141000020E00640000000B060E006800000003CE
-:10142000020E00DC00000003020E000400000001B8
-:10143000020E000800000001020E000C0000000176
-:10144000020E001000000001020E00140000000156
-:10145000020E001800000001020E001C0000000136
-:10146000020E002000000001020E00240000000116
-:10147000020E002800000001020E002C00000001F6
-:10148000020E003000000001020E003400000001D6
-:10149000020E003800000001020E003C00000001B6
-:1014A000020E004000000001020E00440000000196
-:1014B000020E01100000000F020E01180000000EC5
-:1014C000020E012000000000020E012800000000B2
-:1014D000020E01140000002F020E011C0000002E5D
-:1014E000020E012400000000020E012C000000008A
-:1014F000020E01100000001F020E01180000001E65
-:10150000020E012000000000020E01280000000071
-:10151000020E01140000003F020E011C0000003EFC
-:10152000020E012400000000020E012C0000000049
-:10153000020E01100000004F020E01180000004EC4
-:10154000020E012000000000020E01280000000031
-:10155000020E01140000006F020E011C0000006E5C
-:10156000020E012400000000020E012C0000000009
-:10157000020E01100000005F020E01180000005E64
-:10158000020E012000000000020E012800000000F1
-:10159000020E01140000007F020E011C0000007EFC
-:1015A000020E012400000000020E012C00000000C9
-:1015B0000730040000E10000083007D8000502BD34
-:1015C000073400002ECA000007348000311A0BB324
-:1015D00007350000368B17FA0735800039C6259D80
-:1015E0000736000013D5340F0836307039F202BFC9
-:1015F0000130000000000000013000040000000085
-:1016000001300008000000000130000C0000000064
-:101610000130001000000000013000140000000044
-:10162000023000200000000102300024000000020F
-:1016300002300028000000030230002C00000000EF
-:1016400002300030000000040230003400000001CD
-:1016500002300038000000000230003C00000001B1
-:10166000023000400000000402300044000000008E
-:1016700002300048000000010230004C000000036E
-:101680000230005000000000023000540000000151
-:1016900002300058000000040230005C000000002E
-:1016A000023000600000000102300064000000030E
-:1016B00002300068000000000230006C00000001F1
-:1016C00002300070000000040230007400000000CE
-:1016D00002300078000000040230007C00000003AB
-:1016E0000630008000000002023000A400003FFF2E
-:1016F000023000A8000003FF0230022400000000B6
-:1017000002300234000000000230024C00000000F1
-:10171000023002E40000FFFF063020000000080055
-:1017200002338BC000000001023380000000001A69
-:10173000023380400000004E023380800000001021
-:10174000023380C0000000200C3383000007A1207A
-:101750000A338300000001380B3383000000138834
-:10176000023383C0000001F40C3383801DCD65007B
-:101770000A3383800004C4B40B338380004C4B4095
-:101780000A331480000000000233148000000001BE
-:10179000063220000000010206328020000000C84E
-:1017A000063280000000000206323DA8000000045E
-:1017B00006323D800000000904323DA4000102C150
-:1017C00006323D00000000200632500000000400F8
-:1017D000063240000000000204324008000102C24C
-:1017E0000632400C00000003063240D80000000220
-:1017F00006326B680000000204326B70000202C304
-:1018000006326B1000000002043274C0000202C5F0
-:101810000632DA40000000020632E0000000080054
-:10182000023308000100000004330C00001002C75E
-:10183000023308000000000004330C40001002D7FF
-:1018400006322450000000B406322AD00000000204
-:1018500006321000000001A002323DB80000000076
-:101860000632500000000020063251000000002027
-:101870000632520000000020063253000000002013
-:1018800006325400000000200632550000000020FF
-:1018900006325600000000200632570000000020EB
-:1018A00006325800000000200632590000000020D7
-:1018B00006325A000000002006325B0000000020C3
-:1018C00006325C000000002006325D0000000020AF
-:1018D00006325E000000002006325F00000000209B
-:1018E00006326B780000005206326E080000000CD1
-:1018F0000632DA880000000206322720000000B419
-:1019000006322AD80000000206321680000001A02C
-:1019100002323DBC00000000063250800000002072
-:101920000632518000000020063252800000002064
-:101930000632538000000020063254800000002050
-:10194000063255800000002006325680000000203C
-:101950000632578000000020063258800000002028
-:10196000063259800000002006325A800000002014
-:1019700006325B800000002006325C800000002000
-:1019800006325D800000002006325E8000000020EC
-:1019900006325F800000002006326CC0000000525A
-:1019A00006326E380000000C0632DA9000000002A9
-:1019B00002322A3000000000063240180000000207
-:1019C0000632D0000000000602322A340000000077
-:1019D00006324028000000020632D018000000063F
-:1019E00002322A38000000000632403800000002AF
-:1019F0000632D0300000000602322A3C000000000F
-:101A000006324048000000020632D04800000006BE
-:101A100002322A4000000000063240580000000256
-:101A20000632D0600000000602322A4400000000A6
-:101A300006324068000000020632D078000000063E
-:101A400002322A48000000000632407800000002FE
-:101A50000632D0900000000602322A4C000000003E
-:101A600006324088000000020632D0A800000006BE
-:101A7000072004000093000008200780001002E700
-:101A8000072400002ADF0000072480002E050AB882
-:101A90000824E4A061D202E9012000000000000057
-:101AA00001200004000000000120000800000000E8
-:101AB0000120000C000000000120001000000000C8
-:101AC000012000140000000002200020000000019E
-:101AD0000220002400000002022000280000000371
-:101AE0000220002C00000000022000300000000452
-:101AF0000220003400000001022000380000000035
-:101B00000220003C00000001022000400000000410
-:101B100002200044000000000220004800000001F4
-:101B20000220004C000000030220005000000000D2
-:101B300002200054000000010220005800000004B0
-:101B40000220005C00000000022000600000000194
-:101B50000220006400000003022000680000000072
-:101B60000220006C00000001022000700000000450
-:101B70000220007400000000022000780000000431
-:101B80000220007C0000000306200080000000020C
-:101B9000022000A400003FFF022000A8000003FF75
-:101BA0000220022400000000022002340000000095
-:101BB0000220024C00000000022002E40000FFFFAF
-:101BC000062020000000080002238BC00000000156
-:101BD0000223800000000010022380400000001259
-:101BE0000223808000000030022380C00000000E2D
-:101BF000022383C0000001F40223148000000001CE
-:101C00000A23148000000000062210000000004299
-:101C100006227020000000C80622700000000002AA
-:101C2000022211E80000000006223000000000C07F
-:101C3000062240700000008006225280000000044E
-:101C40000622670000000100062290000000040048
-:101C500004226B08002002EB02230800013FFFFF73
-:101C600004230C000010030B0223080000000000F6
-:101C700004230C400010031B06228100000000A07A
-:101C8000062286000000004006228C000000003C76
-:101C90000622B0000000020006228800000000803A
-:101CA00006228DE00000003C0622404000000006B5
-:101CB00006228380000000A006228700000000406A
-:101CC00006228CF00000003C0622B8000000020052
-:101CD00006228A000000008006228ED00000003C10
-:101CE000062240580000000606228000000000087E
-:101CF000022211480000000006223300000000020A
-:101D0000062260400000003006228020000000080B
-:101D10000222114C000000000622330800000002DD
-:101D2000062261000000003006228040000000080A
-:101D300002221150000000000622331000000002B1
-:101D4000062261C00000003006228060000000080A
-:101D50000222115400000000062233180000000285
-:101D60000622628000000030062280800000000809
-:101D70000222115800000000062233200000000259
-:101D80000622634000000030062280A00000000808
-:101D90000222115C0000000006223328000000022D
-:101DA0000622640000000030062280C00000000807
-:101DB0000222116000000000062233300000000201
-:101DC000062264C000000030062280E00000000807
-:101DD00002221164000000000622333800000002D5
-:101DE0000622658000000030021610000000002866
-:101DF00002170008000000020217002C0000000378
-:101E00000217003C00000004021700440000000814
-:101E100002170048000000020217004C000000906A
-:101E2000021700500000009002170054008000903C
-:101E30000217005808140000021700600000008A12
-:101E40000217006400000080021700680000008193
-:101E50000217006C000000800217007000000006EE
-:101E600002170078000007D00217007C0000076C02
-:101E700002170038007C1004021700040000000F55
-:101E80000616402400000002021640700000001CEC
-:101E90000216420800000001021642100000000174
-:101EA0000216422000000001021642280000000134
-:101EB0000216423000000001021642380000000104
-:101EC00002164260000000020C16401C0003D09075
-:101ED0000A16401C0000009C0B16401C000009C4A0
-:101EE0000216403000000008021640340000000CCA
-:101EF0000216403800000010021640440000002086
-:101F00000216400000000001021640D80000000147
-:101F100002164008000000010216400C00000001FB
-:101F200002164010000000010216424000000000AE
-:101F3000021642480000000006164270000000022F
-:101F40000216425000000000021642580000000035
-:101F500006164280000000020216600800000424F9
-:101F60000216600C00000410021660100000041439
-:101F70000216601C0000FFFF021660200000FFFF39
-:101F8000021660240000FFFF021660280000FFFF19
-:101F900002166038000000200216603C000000209D
-:101FA0000216604000000034021660440000003554
-:101FB00002166048000000230216604C0000002456
-:101FC0000216605000000025021660540000002632
-:101FD00002166058000000270216605C000000290D
-:101FE000021660600000002A021660640000002BE8
-:101FF000021660680000002C0216606C0000002DC4
-:102000000616607000000052021661B80000000160
-:10201000061661BC0000001F0216623807FFFFFFB2
-:102020000216623C0000003F0216624007FFFFFFFD
-:10203000021662440000000F011662480000000012
-:102040000116624C00000000011662500000000002
-:1020500001166254000000000116625800000000E2
-:102060000116625C000000000116626000000000C2
-:1020700001166264000000000116626800000000A2
-:102080000116626C00000000011662700000000082
-:102090000116627400000000011662780000000062
-:1020A0000116627C000000000C166000000003E8CE
-:1020B0000A166000000000010B1660000000000A14
-:1020C0000216804000000006021680440000000551
-:1020D000021680480000000A0216804C000000052D
-:1020E0000216805400000002021680CC000000049A
-:1020F000021680D000000004021680D40000000404
-:10210000021680D800000004021680DC00000004E3
-:10211000021680E000000004021680E400000004C3
-:10212000021680E800000004021688040000000483
-:10213000021680300000007C021680340000003D52
-:10214000021680380000003F0216803C0000009C10
-:10215000021680F000000007061680F4000000055B
-:102160000216880C0101010102168108000000001E
-:102170000216810C00000004021681100000000409
-:1021800002168114000000020216881008012004C3
-:1021900002168118000000050216811C00000005CF
-:1021A00002168120000000050216812400000005AF
-:1021B0000216882C20081001021681280000000851
-:1021C0000216812C00000006021681300000000774
-:1021D000021681340000000002168830010101203F
-:1021E000061681380000000402168834010101013E
-:1021F00002168148000000000216814C0000000415
-:1022000002168150000000040216815400000002F2
-:1022100002168838080120040216815800000005C3
-:102220000216815C000000050216816000000005B6
-:1022300002168164000000050216883C2008100187
-:1022400002168168000000080216816C000000067A
-:102250000216817000000007021681740000000160
-:102260000216884001010120021681780000000159
-:102270000216817C0000000102168180000000012E
-:102280000216818400000001021688440101010148
-:1022900002168188000000010216818C00000004F3
-:1022A00002168190000000040216819400000002D2
-:1022B00002168848080120040216819800000005D3
-:1022C0000216819C00000005021681A00000000596
-:1022D000021681A4000000050216881420081001CF
-:1022E000021681A800000008021681AC000000065A
-:1022F000021681B000000007021681B40000000140
-:102300000216881801010120021681B800000001A0
-:10231000021681BC00000001021681C0000000010D
-:10232000021681C4000000010216881C010101018F
-:10233000021681C800000001021681CC00000004D2
-:10234000021681D000000004021681D400000002B1
-:102350000216882008012004021681D8000000051A
-:10236000021681DC00000005021681E00000000575
-:10237000021681E4000000050216882420081001DE
-:10238000021681E800000008021681EC0000000639
-:10239000021681F0000000070216E40C00000000A5
-:1023A00002168828010101200616E410000000042E
-:1023B0000216E000010101010216E4200000000005
-:1023C0000216E424000000040216E42800000004C1
-:1023D0000216E42C000000020216E00408012004AA
-:1023E0000216E430000000050216E4340000000587
-:1023F0000216E438000000050216E43C0000000567
-:102400000216E008200810010216E440000000084F
-:102410000216E444000000060216E448000000072B
-:102420000216E44C000000000216E00C010101203D
-:102430000616E450000000040216E010010101013C
-:102440000216E460000000000216E46400000004CC
-:102450000216E468000000040216E46C00000002AA
-:102460000216E014080120040216E47000000005C2
-:102470000216E474000000050216E478000000056E
-:102480000216E47C000000050216E0182008100186
-:102490000216E480000000080216E4840000000632
-:1024A0000216E488000000070216E48C0000000118
-:1024B0000216E01C010101200216E4900000000158
-:1024C0000216E494000000010216E49800000001E6
-:1024D0000216E49C000000010216E0200101010147
-:1024E0000216E4A0000000010216E4A400000004AB
-:1024F0000216E4A8000000040216E4AC000000028A
-:102500000216E024080120040216E4B000000005D1
-:102510000216E4B4000000050216E4B8000000054D
-:102520000216E4BC000000050216E0282008100195
-:102530000216E4C0000000080216E4C40000000611
-:102540000216E4C8000000070216E4CC00000001F7
-:102550000216E02C010101200216E4D00000000167
-:102560000216E4D4000000010216E4D800000001C5
-:102570000216E4DC000000010216E0300101010156
-:102580000216E4E0000000010216E4E4000000048A
-:102590000216E4E8000000040216E4EC0000000269
-:1025A0000216E034080120040216E4F000000005E1
-:1025B0000216E4F4000000050216E4F8000000052D
-:1025C0000216E4FC000000050216E03820081001A5
-:1025D0000216E500000000080216E50400000006EF
-:1025E0000216E508000000070216E03C0101012088
-:1025F00002168240003F003F0216824400000000A5
-:102600000216E524003F003F0216E5280000000006
-:1026100002168248000000000216824C003F003F74
-:102620000216E52C000000000216E530003F003FD6
-:1026300002168250010001000216825401000100BE
-:102640000216E534010001000216E5380100010020
-:1026500006168258000000020216E53C0000000049
-:102660000216E540000000000216826000C000C0B3
-:102670000216826400C000C00216E54400C000C01B
-:102680000216E54800C000C0021682681E001E0047
-:102690000216826C1E001E000216E54C1E001E0073
-:1026A0000216E5501E001E00021682704000400017
-:1026B00002168274400040000216E55440004000BB
-:1026C0000216E55840004000021682788000800023
-:1026D0000216827C800080000216E55C800080008B
-:1026E0000216E56080008000021682802000200033
-:1026F00002168284200020000216E56420002000DB
-:102700000216E568200020000616828800000002FC
-:102710000216E56C000000000216E57000000000E3
-:102720000216829000000000021682940000000051
-:102730000216E574000000000216E57800000000B3
-:1027400002168298000000000216829C0000000021
-:102750000216E57C000000000216E5800000000083
-:10276000021682A000000000021682A400000001F0
-:10277000061682A80000000A021681F400000C0868
-:10278000021681F800000040021681FC00000100E2
-:1027900002168200000000200216820400000017CA
-:1027A00002168208000000800216820C000002005F
-:1027B00002168210000000000216821801FF01FFBD
-:1027C0000216821401FF01FF0216E51001FF01FF4E
-:1027D0000216E50C01FF01FF0216823C0000001307
-:1027E000021680900000013F021680600000014048
-:1027F0000216806400000140061680680000000296
-:1028000002168070000000C00616807400000007E9
-:102810000216809C00000048021680A000000048BC
-:10282000061680A400000002021680AC00000048DA
-:10283000061680B0000000070216823800008000F3
-:1028400002168234000025E40216809400007FFF07
-:1028500002168220000F000F0216821C000F000FCC
-:102860000216E518000F000F0216E514000F000F06
-:10287000021682280000000002168224FFFFFFFFDC
-:102880000216E520000000000216E51CFFFFFFFF16
-:102890000216E6BC000000000216E6C000000002BE
-:1028A0000216E6C4000000010216E6C8000000039C
-:1028B0000216E6CC000000040216E6D00000000676
-:1028C0000216E6D4000000050216E6D80000000754
-:1028D000021680EC000000FF02140000000000015E
-:1028E0000214000C0000000102140040000000016E
-:1028F0000214004400007FFF0214000C00000000DE
-:1029000002140000000000000214006C000000002F
-:102910000214000400000001021400300000000155
-:1029200002140004000000000214005C000000001B
-:10293000021400080000000102140034000000012D
-:1029400002140008000000000214006000000000F3
-:102950000202005800000032020200A0031500200D
-:10296000020200A403150020020200A801000030AA
-:10297000020200AC08100000020200B000000033A8
-:10298000020200B400000030020200B80000003172
-:10299000020200BC00000003020200C000000006AA
-:1029A000020200C400000003020200C8000000038D
-:1029B000020200CC00000002020200D00000000071
-:1029C000020200D400000002020200DC000000004D
-:1029D000020200E000000006020200E40000000421
-:1029E000020200E800000002020200EC0000000207
-:1029F000020200F000000001020200FC00000006DC
-:102A00000202012000000000020201340000000266
-:102A1000020201B0000000010202020C00000001ED
-:102A2000020202140000000102020218000000026B
-:102A300002020404000000010202040C0000004035
-:102A400002020410000000400202041C0000000406
-:102A50000202042000000020020204240000000200
-:102A600002020428000000200602050000000012F7
-:102A700004020480001F032B020200600000000F0C
-:102A80000202006400000007020200680000000B60
-:102A90000202006C0000000E020200700000000E36
-:102AA0000602007400000003020200F400000004AB
-:102AB0000202000400000001020200080000000100
-:102AC0000202000C000000010202001000000001E0
-:102AD00002020014000000010202001800000001C0
-:102AE0000202001C000000010202002000000001A0
-:102AF0000202002400000001020200280000000180
-:102B00000202002C0000000102020030000000015F
-:102B1000020200340000000102020038000000013F
-:102B20000202003C0000000102020040000000011F
-:102B300002020044000000010202004800000001FF
-:102B40000202004C000000010202005000000001DF
-:102B500002020108000000C8020201180000000281
-:102B6000020201C400000000020201CC00000000CB
-:102B7000020201D400000002020201DC0000000297
-:102B8000020201E4000000FF020201EC000000FF6D
-:102B900002020100000000000202010C000000C857
-:102BA0000202011C00000002020201C80000000035
-:102BB000020201D000000000020201D80000000261
-:102BC000020201E000000002020201E8000000FF32
-:102BD000020201F0000000FF0202010400000000F8
-:102BE00002020108000000C80202011800000002F1
-:102BF000020201C400000000020201CC000000003B
-:102C0000020201D400000002020201DC0000000206
-:102C1000020201E4000000FF020201EC000000FFDC
-:102C200002020100000000000202010C000000C8C6
-:102C30000202011C00000002020201C800000000A4
-:102C4000020201D000000000020201D800000002D0
-:102C5000020201E000000002020201E8000000FFA1
-:102C6000020201F0000000FF020201040000000067
-:102C700002020108000000C8020201180000000260
-:102C8000020201C400000000020201CC00000000AA
-:102C9000020201D400000002020201DC0000000276
-:102CA000020201E4000000FF020201EC000000FF4C
-:102CB00002020100000000000202010C000000C836
-:102CC0000202011C00000002020201C80000000014
-:102CD000020201D000000000020201D80000000240
-:102CE000020201E000000002020201E8000000FF11
-:102CF000020201F0000000FF0202010400000000D7
-:102D000002020108000000C80202011800000002CF
-:102D1000020201C400000000020201CC0000000019
-:102D2000020201D400000002020201DC00000002E5
-:102D3000020201E4000000FF020201EC000000FFBB
-:102D400002020100000000000202010C000000C8A5
-:102D50000202011C00000002020201C80000000083
-:102D6000020201D000000000020201D800000002AF
-:102D7000020201E000000002020201E8000000FF80
-:102D8000020201F0000000FF020201040000000046
-:102D90000728040000C00000082807A8000B034A09
-:102DA000072C000032FD0000072C8000357E0CC08F
-:102DB000072D00003AE41A20072D800039CF28DAC9
-:102DC000072E00001C3C374E082E3710391E034CCE
-:102DD000012800000000000001280004000000009D
-:102DE00001280008000000000128000C000000007D
-:102DF000012800100000000001280014000000005D
-:102E00000228002000000001022800240000000227
-:102E100002280028000000030228002C0000000007
-:102E200002280030000000040228003400000001E5
-:102E300002280038000000000228003C00000001C9
-:102E400002280040000000040228004400000000A6
-:102E500002280048000000010228004C0000000386
-:102E60000228005000000000022800540000000169
-:102E700002280058000000040228005C0000000046
-:102E80000228006000000001022800640000000326
-:102E900002280068000000000228006C0000000109
-:102EA00002280070000000040228007400000000E6
-:102EB00002280078000000040228007C00000003C3
-:102EC0000628008000000002022800A400003FFF46
-:102ED000022800A8000003FF0228022400000000CE
-:102EE00002280234000000000228024C000000000A
-:102EF000022802E40000FFFF06282000000008006E
-:102F0000022B8BC000000001022B8000000000009B
-:102F1000022B804000000018022B80800000000C73
-:102F2000022B80C0000000660C2B83000007A1204C
-:102F30000A2B8300000001380B2B8300000013884C
-:102F4000022B83C0000001F40C2B8340000001F42D
-:102F50000A2B8340000000000B2B8340000000057B
-:102F60000A2B83800004C4B40C2B83801DCD650024
-:102F70000A2B1480000000000B2B8380004C4B4078
-:102F8000022B148000000001062A29C8000000045A
-:102F9000042A29D80002034E062A20800000004897
-:102FA000062A9020000000C8062A900000000002B7
-:102FB000062A21A800000086062A20000000002022
-:102FC000022A23C800000000042A23D00002035074
-:102FD000042A249800040352022A2C500000000006
-:102FE000022A2C1000000000042A2C0800020356BC
-:102FF000042A300000020358062A300800000100AD
-:10300000062A404000000010042A40000010035A25
-:10301000062A6AC000000002062A6B0000000004B5
-:10302000042A84080002036A022B08000000000042
-:10303000042B0C000010036C022B080001000000A0
-:10304000042B0C400008037C022B08000200000047
-:10305000042B0C6000080384062AC000000000D87E
-:10306000062A24A800000014062A2548000000248F
-:10307000062A266800000024062A2788000000246B
-:10308000062A28A800000024062AA0000000002824
-:10309000062AA1400000000C042A29E00002038C4B
-:1030A000062A502000000002062A503000000002CC
-:1030B000062A500000000002062A501000000002FC
-:1030C000022A520800000001042A6AC80002038E86
-:1030D000062A6B1000000042062A6D200000000442
-:1030E000062ABCD000000002062AC360000000D8F7
-:1030F000062A24F800000014062A25D8000000241F
-:10310000062A26F800000024062A281800000024B9
-:10311000062A293800000024062AA0A00000002862
-:10312000062AA1700000000C042A29E8000203907E
-:10313000062A502800000002062A5038000000022B
-:10314000062A500800000002062A5018000000025B
-:10315000022A520C00000001042A6AD000020392E5
-:10316000062A6C1800000042062A6D300000000498
-:10317000062ABCD800000002022AC6C000000000D7
-:10318000042A29F000100394062A50480000000E7B
-:10319000062AB00000000006022AC6C40000000093
-:1031A000042A2A30001003A4062A50800000000ED2
-:1031B000062AB01800000006022AC6C80000000057
-:1031C000042A2A70001003B4062A50B80000000E2A
-:1031D000062AB03000000006022AC6CC000000001B
-:1031E000042A2AB0001003C4062A50F00000000E82
-:1031F000062AB04800000006022AC6D000000000DF
-:10320000042A2AF0001003D4062A51280000000ED8
-:10321000062AB06000000006022AC6D400000000A2
-:10322000042A2B30001003E4062A51600000000E2F
-:10323000062AB07800000006022AC6D80000000066
-:10324000042A2B70001003F4062A51980000000E87
-:10325000062AB09000000006022AC6DC000000002A
-:10326000042A2BB000100404062A51D00000000EDE
-:10327000062AB0A800000006021010080000000195
-:103280000210105000000001021010000003D000D6
-:10329000021010040000003D091018000200041480
-:1032A0000910110000280614061011A000000018D3
-:1032B00006102400000000E00210201C00000000A6
-:1032C0000210202000000001021020C000000002B7
-:1032D000021020040000000102102008000000017C
-:1032E00009103C000005063C0910380000050641A5
-:1032F000091038200005064606104C0000000100A9
-:1033000002104028000000100210404400003FFF5F
-:103310000210405800280000021040840084924AA5
-:1033200002104058000000000210800000001080D1
-:10333000021080AC00000000021080380000001075
-:103340000210810000000000061081200000000231
-:1033500002108008000002B502108010000000007A
-:10336000061082000000004A021081080001FFFFE1
-:1033700006108140000000020210800000001A8048
-:103380000610900000000024061091200000004A62
-:10339000061093700000004A061095C00000004A15
-:1033A0000210800400001080021080B000000001B4
-:1033B0000210803C00000010021081040000000098
-:1033C00006108128000000020210800C000002B5E7
-:1033D0000210801400000000061084000000004A63
-:1033E0000210810C0001FFFF06108148000000025E
-:1033F0000210800400001A80061090900000002443
-:10340000061092480000004A061094980000004AF6
-:10341000061096E80000004A0210800000001080AC
-:10342000021080AC00000002021080380000001082
-:103430000210810000000000061081200000000240
-:1034400002108008000002B5021080100000000089
-:10345000061082000000004A021081080001FFFFF0
-:1034600006108140000000020210800000001A8057
-:103470000610900000000024061091200000004A71
-:10348000061093700000004A061095C00000004A24
-:103490000210800400001080021080B000000003C1
-:1034A0000210803C000000100210810400000000A7
-:1034B00006108128000000020210800C000002B5F6
-:1034C0000210801400000000061084000000004A72
-:1034D0000210810C0001FFFF06108148000000026D
-:1034E0000210800400001A80061090900000002452
-:1034F000061092480000004A061094980000004A06
-:10350000061096E80000004A0210800000001080BB
-:10351000021080AC0000000402108038000000108F
-:10352000021081000000000006108120000000024F
-:1035300002108008000002B5021080100000000098
-:10354000061082000000004A021081080001FFFFFF
-:1035500006108140000000020210800000001A8066
-:103560000610900000000024061091200000004A80
-:10357000061093700000004A061095C00000004A33
-:103580000210800400001080021080B000000005CE
-:103590000210803C000000100210810400000000B6
-:1035A00006108128000000020210800C000002B505
-:1035B0000210801400000000061084000000004A81
-:1035C0000210810C0001FFFF06108148000000027C
-:1035D0000210800400001A80061090900000002461
-:1035E000061092480000004A061094980000004A15
-:1035F000061096E80000004A0210800000001080CB
-:10360000021080AC0000000602108038000000109C
-:10361000021081000000000006108120000000025E
-:1036200002108008000002B50210801000000000A7
-:10363000061082000000004A021081080001FFFF0E
-:1036400006108140000000020210800000001A8075
-:103650000610900000000024061091200000004A8F
-:10366000061093700000004A061095C00000004A42
-:103670000210800400001080021080B000000007DB
-:103680000210803C000000100210810400000000C5
-:1036900006108128000000020210800C000002B514
-:1036A0000210801400000000061084000000004A90
-:1036B0000210810C0001FFFF06108148000000028B
-:1036C0000210800400001A80061090900000002470
-:1036D000061092480000004A061094980000004A24
-:1036E000061096E80000004A021205B00000000132
-:1036F0000212049000E383400212051400003C1003
-:103700000212066C000000010212067000000000A8
-:1037100002120494FFFFFFFF02120498FFFFFFFF55
-:103720000212049CFFFFFFFF021204A0FFFFFFFF35
-:10373000021204A4FFFFFFFF021204A8FFFFFFFF15
-:10374000021204ACFFFFFFFF021204B0FFFFFFFFF5
-:10375000021204BCFFFFFFFF021204C0FFFFFFFFC5
-:10376000021204C4FFFFFFFF021204C8FFFFFFFFA5
-:10377000021204CCFFFFFFFF021204D0FFFFFFFF85
-:10378000021204D8FFFFFFFF021204DCFFFFFFFF5D
-:10379000021204E0FFFFFFFF021204E4FFFFFFFF3D
-:1037A000021204E8FFFFFFFF021204ECFFFFFFFF1D
-:1037B000021204F0FFFFFFFF021204F4FFFFFFFFFD
-:1037C000021204F8FFFFFFFF021204FCFFFFFFFFDD
-:1037D00002120500FFFFFFFF02120504FFFFFFFFBB
-:1037E00002120508FFFFFFFF0212050CFFFFFFFF9B
-:1037F00002120510FFFFFFFF021204D4FF80200019
-:10380000021204B4F0005000021204B8F0001000DC
-:1038100002120390000000080212039C000000083E
-:10382000021203A000000008021203A4000000021C
-:10383000021203BC00000004021203C000000005D5
-:10384000021203C400000004021203D000000000B2
-:103850000212036C00000001021203680000003F26
-:10386000021201BC00000040021201C00000180852
-:10387000021201C400000803021201C8000008037C
-:10388000021201CC00000040021201D0000000032F
-:10389000021201D400000803021201D8000008033C
-:1038A000021201DC00000803021201E00001000323
-:1038B000021201E400000803021201E800000803FC
-:1038C000021201EC00000003021201F000000003EC
-:1038D000021201F400000003021201F800000003CC
-:1038E000021201FC000000030212020000000003AB
-:1038F000021202040000000302120208000000038A
-:103900000212020C00000003021202100000000369
-:103910000212021400000003021202180000000349
-:103920000212021C00000003021202200000000329
-:1039300002120224000000030212022800002403E5
-:103940000212022C0000002F0212023000000009B7
-:103950000212023400000019021202380000018431
-:103960000212023C00000183021202400000030622
-:103970000212024400000019021202480000000670
-:103980000212024C0000030602120250000003065D
-:1039900002120254000003060212025800000C86B4
-:1039A0000212025C0000030602120260000003061D
-:1039B0000212026400000006021202680000000603
-:1039C0000212026C000000060212027000000006E3
-:1039D00002120274000000060212027800000006C3
-:1039E0000212027C000000060212028000000006A3
-:1039F0000212028400000006021202880000000683
-:103A00000212028C00000006021202900000000662
-:103A10000212029400000006021202980000000642
-:103A20000212029C00000006021202A0000003061F
-:103A3000021202A400000013021202A800000006F5
-:103A4000021202B000001004021202B400001004BE
-:103A50000212032400106440021203280010644084
-:103A6000021205B400000001021201B000000001C2
-:103A70000600A000000000160200A0EC5554000053
-:103A80000200A0F0555555550200A0F40000555510
-:103A90000200A0F8F00000000200A0FC5554000055
-:103AA0000200A100555555550200A10400005555CE
-:103AB0000200A108F00000000200A18C5554000093
-:103AC0000200A190555555550200A194000055558E
-:103AD0000200A198F00000000200A19C000000007C
-:103AE0000200A1A0000100000200A1A400005014E7
-:103AF0000200A1A8000000000200A45C00000C006D
-:103B00000200A61C000000030200A06CFF5C000085
-:103B10000200A070FFF55FFF0200A0740000FFFF2D
-:103B20000200A078F00003E00200A07C000000008A
-:103B30000200A0800000A0000600A0840000000594
-:103B40000200A0980FE000000600A09C0000000703
-:103B50000200A0B8000004000600A0BC00000003A2
-:103B60000200A0C8000010000600A0CC0000000366
-:103B70000200A0D8000040000600A0DC0000000306
-:103B80000200A0E8000100000600A22C00000004D2
-:103B90000200A10CFF5C00000200A110FFF55FFF16
-:103BA0000200A1140000FFFF0200A118F00003E0D2
-:103BB0000200A11C000000000200A1200000A000E3
-:103BC0000600A124000000050200A1380FE000005B
-:103BD0000600A13C000000070200A15800000800F8
-:103BE0000600A15C000000030200A16800002000A4
-:103BF0000600A16C000000030200A1780000800014
-:103C00000600A17C000000030200A1880002000061
-:103C10000600A23C000000040000000000000000BC
-:103C20000000003100000000000000000000000063
-:103C30000000000000000000000000000000000084
-:103C40000000000000000000000000000031003211
-:103C50000000000000000000000000000000000064
-:103C60000000000000000000000000000000000054
-:103C700000000000000000000032005600000000BC
-:103C80000000000000000000000000000000000034
-:103C90000000000000000000000000000000000024
-:103CA000000000000056008C000000000000000032
-:103CB000008C009000900094009400980098009C64
-:103CC000009C00A000A000A400A400A800A800ACD4
-:103CD00000AC00B100B100B300B300B500000000BB
-:103CE00000000000000000000000000000000000D4
-:103CF00000000000000000000000000000B501020C
-:103D00000102010A010A01120112011B011B012417
-:103D10000124012D012D01360136013F013F0148EB
-:103D2000014801510151015A00000000000000004B
-:103D30000000000000000000000000000000000083
-:103D40000000000000000000000000000000000073
-:103D50000000000000000000000000000000000063
-:103D60000000000000000000000000000000000053
-:103D70000000000000000000000000000000000043
-:103D80000000000000000000000000000000000033
-:103D90000000000000000000000000000000000023
-:103DA0000000000000000000000000000000000013
-:103DB0000000000000000000000000000000000003
-:103DC00000000000000000000000000000000000F3
-:103DD0000000000000000000015A015F0000000028
-:103DE00000000000015F016001600161016101628A
-:103DF000016201630163016401640165016501669B
-:103E000001660167000000000000000000000000E3
-:103E100000000000000000000000000000000000A2
-:103E20000000000000000000000000000000000092
-:103E30000167016C016C01790179018600000000C5
-:103E40000000000000000000000000000000000072
-:103E50000000000000000000000000000000000062
-:103E60000000000000000000000000000000000052
-:103E70000000000000000000000000000000000042
-:103E80000000000000000000018601870000000023
-:103E90000000000000000000000000000000000022
-:103EA0000000000000000000000000000000000012
-:103EB00000000000018701BE0000000000000000BB
-:103EC00000000000000000000000000000000000F2
-:103ED00000000000000000000000000000000000E2
-:103EE00001BE01E900000000000000000000000029
-:103EF00000000000000000000000000000000000C2
-:103F000000000000000000000000000001E9021AAB
-:103F10000000000000000000021A02210221022815
-:103F20000228022F022F02360236023D023D0244D1
-:103F30000244024B024B02520252028A000000006D
-:103F400000000000028A028E028E02920292029605
-:103F50000296029A029A029E029E02A202A202A661
-:103F600002A602AA02AA02FC02FC03130313032AFC
-:103F7000032A032D032D03300330033303330336A9
-:103F8000033603390339033C033C033F033F034239
-:103F9000034203830383038A038A039103910395F6
-:103FA000039503990399039D039D03A103A103A511
-:103FB00003A503A903A903AD03AD03B103B103B284
-:103FC00000000000000000000000000000000000F1
-:103FD00000000000000000000000000000000000E1
-:103FE000000000000000000003B203C40000000055
-:103FF00000000000000000000000000000000000C1
-:1040000000000000000000000000000000000000B0
-:104010000000000003C403D903D903DC03DC03DF81
-:104020000000000000000000000000000000000090
-:104030000000000000000000000000000000000080
-:1040400003DF040C0000000000000000000000007E
-:104050000000000000000000000000000000000060
-:10406000000000000000000000000000040C050F2C
-:104070000000000000000000000000000000000040
-:104080000000000000000000000000000000000030
-:104090000000000000000000050F05160516051AB7
-:1040A000051A051E000000000000000000000000CE
-:1040B0000000000000000000000000000000000000
-:1040C00000000000051E055E00000000000000006A
-:1040D000055E056705670570057005790579058238
-:1040E0000582058B058B05940594059D059D05A608
-:1040F00005A605FF05FF0611061106230623062760
-:104100000627062B062B062F062F06330633063707
-:104110000637063B063B063F063F06430643064A74
-:10412000000000000000000000000000000000008F
-:10413000000000000000000000000000000000007F
-:104140000000000000000000064A065000000000C9
-:10415000000000000000000000000000000000005F
-:10416000000000000000000000000000000000004F
-:104170000000000006500653000000000000000090
-:10418000000000000000000000000000000000002F
-:10419000000000000000000000000000000000001F
-:1041A0000653065900000000000000000000000057
-:1041B00000000000000000000000000000000000FF
-:1041C00000000000000000000000000000000000EF
-:1041D0000000000000000000065906680668067727
-:1041E0000677068606860695069506A406A406B3F7
-:1041F00006B306C206C206D106D10742000000007F
-:1042000000000000000000000000000000000000AE
-:10421000000000000000000000000000000000009E
-:104220000000000007420755075507660766077735
-:10423000000000000000000000000000000000007E
-:10424000000000000000000000000000000000006E
-:10425000000000000000000000000000000000005E
-:10426000000000000000000000000000000000004E
-:10427000000000000000000000000000000000003E
-:10428000000000000000000000000000000000002E
-:10429000000000000000000000000000000000001E
-:1042A000000000000000000000000000000000000E
-:1042B00000010000000204C00003098000040E4059
-:1042C00000051300000617C000071C8000082140ED
-:1042D00000092600000A2AC0000B2F80000C344081
-:1042E000000D3900000E3DC0000F42800010474015
-:1042F00000114C00001250C00013558000145A40A9
-:1043000000155F00001663C00017688000186D403C
-:1043100000197200001A76C0001B7B80001C8040D0
-:10432000001D8500001E89C0001F8E800020934064
-:10433000000020000000400000006000000080003D
-:104340000000A0000000C0000000E000000100002C
-:104350000001200000014000000160000001800019
-:104360000001A0000001C0000001E0000002000008
-:1043700000022000000240000002600000028000F5
-:104380000002A0000002C0000002E00000030000E4
-:1043900000032000000340000003600000038000D1
-:1043A0000003A0000003C0000003E00000040000C0
-:1043B00000042000000440000004600000048000AD
-:1043C0000004A0000004C0000004E000000500009C
-:1043D0000005200000054000000560000005800089
-:1043E0000005A0000005C0000005E0000006000078
-:1043F0000006200000064000000660000006800065
-:104400000006A0000006C0000006E0000007000053
-:104410000007200000074000000760000007800040
-:104420000007A0000007C0000007E000000800002F
-:10443000000820000008400000086000000880001C
-:104440000008A0000008C0000008E000000900000B
-:1044500000092000000940000009600000098000F8
-:104460000009A0000009C0000009E000000A0000E7
-:10447000000A2000000A4000000A6000000A8000D4
-:10448000000AA000000AC000000AE000000B0000C3
-:10449000000B2000000B4000000B6000000B8000B0
-:1044A000000BA000000BC000000BE000000C00009F
-:1044B000000C2000000C4000000C6000000C80008C
-:1044C000000CA000000CC000000CE000000D00007B
-:1044D000000D2000000D4000000D6000000D800068
-:1044E000000DA000000DC000000DE000000E000057
-:1044F000000E2000000E4000000E6000000E800044
-:10450000000EA000000EC000000EE000000F000032
-:10451000000F2000000F4000000F6000000F80001F
-:10452000000FA000000FC000000FE000001000000E
-:1045300000102000001040000010600000108000FB
-:104540000010A0000010C0000010E00000110000EA
-:1045500000112000001140000011600000118000D7
-:104560000011A0000011C0000011E00000120000C6
-:1045700000122000001240000012600000128000B3
-:104580000012A0000012C0000012E00000130000A2
-:10459000001320000013400000136000001380008F
-:1045A0000013A0000013C0000013E000001400007E
-:1045B000001420000014400000146000001480006B
-:1045C0000014A0000014C0000014E000001500005A
-:1045D0000015200000154000001560000015800047
-:1045E0000015A0000015C0000015E0000016000036
-:1045F0000016200000164000001660000016800023
-:104600000016A0000016C0000016E0000017000011
-:1046100000172000001740000017600000178000FE
-:104620000017A0000017C0000017E00000180000ED
-:1046300000182000001840000018600000188000DA
-:104640000018A0000018C0000018E00000190000C9
-:1046500000192000001940000019600000198000B6
-:104660000019A0000019C0000019E000001A0000A5
-:10467000001A2000001A4000001A6000001A800092
-:10468000001AA000001AC000001AE000001B000081
-:10469000001B2000001B4000001B6000001B80006E
-:1046A000001BA000001BC000001BE000001C00005D
-:1046B000001C2000001C4000001C6000001C80004A
-:1046C000001CA000001CC000001CE000001D000039
-:1046D000001D2000001D4000001D6000001D800026
-:1046E000001DA000001DC000001DE000001E000015
-:1046F000001E2000001E4000001E6000001E800002
-:10470000001EA000001EC000001EE000001F0000F0
-:10471000001F2000001F4000001F6000001F8000DD
-:10472000001FA000001FC000001FE00000200000CC
-:1047300000202000002040000020600000208000B9
-:104740000020A0000020C0000020E00000210000A8
-:104750000021200000214000002160000021800095
-:104760000021A0000021C0000021E0000022000084
-:104770000022200000224000002260000022800071
-:104780000022A0000022C0000022E0000023000060
-:10479000002320000023400000236000002380004D
-:1047A0000023A0000023C0000023E000002400003C
-:1047B0000024200000244000002460000024800029
-:1047C0000024A0000024C0000024E0000025000018
-:1047D0000025200000254000002560000025800005
-:1047E0000025A0000025C0000025E00000260000F4
-:1047F00000262000002640000026600000268000E1
-:104800000026A0000026C0000026E00000270000CF
-:1048100000272000002740000027600000278000BC
-:104820000027A0000027C0000027E00000280000AB
-:104830000028200000284000002860000028800098
-:104840000028A0000028C0000028E0000029000087
-:104850000029200000294000002960000029800074
-:104860000029A0000029C0000029E000002A000063
-:10487000002A2000002A4000002A6000002A800050
-:10488000002AA000002AC000002AE000002B00003F
-:10489000002B2000002B4000002B6000002B80002C
-:1048A000002BA000002BC000002BE000002C00001B
-:1048B000002C2000002C4000002C6000002C800008
-:1048C000002CA000002CC000002CE000002D0000F7
-:1048D000002D2000002D4000002D6000002D8000E4
-:1048E000002DA000002DC000002DE000002E0000D3
-:1048F000002E2000002E4000002E6000002E8000C0
-:10490000002EA000002EC000002EE000002F0000AE
-:10491000002F2000002F4000002F6000002F80009B
-:10492000002FA000002FC000002FE000003000008A
-:104930000030200000304000003060000030800077
-:104940000030A0000030C0000030E0000031000066
-:104950000031200000314000003160000031800053
-:104960000031A0000031C0000031E0000032000042
-:10497000003220000032400000326000003280002F
-:104980000032A0000032C0000032E000003300001E
-:10499000003320000033400000336000003380000B
-:1049A0000033A0000033C0000033E00000340000FA
-:1049B00000342000003440000034600000348000E7
-:1049C0000034A0000034C0000034E00000350000D6
-:1049D00000352000003540000035600000358000C3
-:1049E0000035A0000035C0000035E00000360000B2
-:1049F000003620000036400000366000003680009F
-:104A00000036A0000036C0000036E000003700008D
-:104A1000003720000037400000376000003780007A
-:104A20000037A0000037C0000037E0000038000069
-:104A30000038200000384000003860000038800056
-:104A40000038A0000038C0000038E0000039000045
-:104A50000039200000394000003960000039800032
-:104A60000039A0000039C0000039E000003A000021
-:104A7000003A2000003A4000003A6000003A80000E
-:104A8000003AA000003AC000003AE000003B0000FD
-:104A9000003B2000003B4000003B6000003B8000EA
-:104AA000003BA000003BC000003BE000003C0000D9
-:104AB000003C2000003C4000003C6000003C8000C6
-:104AC000003CA000003CC000003CE000003D0000B5
-:104AD000003D2000003D4000003D6000003D8000A2
-:104AE000003DA000003DC000003DE000003E000091
-:104AF000003E2000003E4000003E6000003E80007E
-:104B0000003EA000003EC000003EE000003F00006C
-:104B1000003F2000003F4000003F6000003F800059
-:104B2000003FA000003FC000003FE000003FE00168
-:104B300000000000000001FF0000020000007FF8FC
-:104B400000007FF800000CDF0000150000000001ED
-:104B50000000000100000001FFFFFFFFFFFFFFFF5B
-:104B6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF55
-:104B7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF45
-:104B8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF35
-:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
-:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
-:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
-:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
-:104BD000FFFFFFFFFFFFFFFFFFFFFFFF00000000E1
-:104BE000FFFFFFFF00000000FFFFFFFFFFFFFFFFD1
-:104BF00000000000FFFFFFFF00000000FFFFFFFFBD
-:104C0000FFFFFFFF00000000FFFFFFFF00000000AC
-:104C1000FFFFFFFF0000000300BEBC20FFFFFFFFFF
-:104C200000000000FFFFFFFF00000000FFFFFFFF8C
-:104C30000000000300BEBC20FFFFFFFF00000000DB
-:104C4000FFFFFFFF00000000FFFFFFFF0000000369
-:104C500000BEBC20FFFFFFFF00000000FFFFFFFFC2
-:104C600000000000FFFFFFFF0000000300BEBC20AB
-:104C7000FFFFFFFF00000000FFFFFFFF000000003C
-:104C8000FFFFFFFF0000000300BEBC20FFFFFFFF8F
-:104C900000000000FFFFFFFF00000000FFFFFFFF1C
-:104CA0000000000300BEBC2000002000000040C047
-:104CB00000006180000082400000A3000000C3C02B
-:104CC0000000E4800001054000012600000146C00C
-:104CD00000016780000188400001A9000001C9C0EF
-:104CE0000001EA8000020B4000022C0000024CC0D0
-:104CF00000026D8000028E400002AF000002CFC0B3
-:104D00000002F0800003114000033200000352C093
-:104D100000037380000394400003B5000003D5C076
-:104D20000003F6800004174000043800000458C057
-:104D30000004798000049A40000080000001038094
-:104D40000001870000020A8000028E00000311802B
-:104D5000000395000004188000049C0000051F80DB
-:104D60000005A300000626800006AA0000072D808B
-:104D70000007B100000834800008B80000093B803B
-:104D80000009BF00000A4280000AC600000B4980EB
-:104D9000000BCD00000C5080000CD400000D57809B
-:104DA000000DDB0000007FF800007FF80000193CD8
-:104DB000000015000000190000000028001000008D
-:104DC0000000000000000000FFFFFFFF40000000A7
-:104DD00040000000400000004000000040000000D3
-:104DE00040000000400000004000000040000000C3
-:104DF00040000000400000004000000040000000B3
-:104E000040000000400000004000000040000000A2
-:104E10004000000040000000400000004000000092
-:104E20004000000040000000400000004000000082
-:104E30004000000040000000400000004000000072
-:104E400040000000400000004000000000007FF82B
-:104E500000007FF8000005C700001500FFFFFFFFFE
-:104E6000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF52
-:104E7000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF42
-:104E8000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF32
-:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
-:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
-:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
-:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
-:104ED000FFFFFFFFFFFFFFFFFFFFFFFF400000009E
-:104EE00040000000400000004000000040000000C2
-:104EF00040000000400000004000000040000000B2
-:104F000040000000400000004000000040000000A1
-:104F10004000000040000000400000004000000091
-:104F20004000000040000000400000004000000081
-:104F30004000000040000000400000004000000071
-:104F40004000000040000000400000004000000061
-:104F50004000000040000000400000000000100081
-:104F6000000020800000310000004180000052005D
-:104F70000000628000007300000083800000940045
-:104F80000000A4800000B5000000C5800000D6002D
-:104F90000000E6800000F700000107800001180013
-:104FA00000012880000139000001498000015A00F9
-:104FB00000016A8000017B0000018B8000019C00E1
-:104FC0000001AC800001BD000001CD800001DE00C9
-:104FD0000001EE800001FF0000007FF800007FF874
-:104FE0000000112E0000350010000000000028AD68
-:104FF000000000000001000100150005CCCCCCC56C
-:10500000FFFFFFFFFFFFFFFF7058103C0000000094
-:105010000000000000000001CCCC0201CCCCCCCCC4
-:10502000CCCC0201CCCCCCCCCCCC0201CCCCCCCCEA
-:10503000CCCC0201CCCCCCCCCCCC0201CCCCCCCCDA
-:10504000CCCC0201CCCCCCCCCCCC0201CCCCCCCCCA
-:10505000CCCC0201CCCCCCCC00000000FFFFFFFF89
-:105060004000000040000000400000004000000040
-:105070004000000040000000400000004000000030
-:105080004000000040000000400000004000000020
-:105090004000000040000000400000004000000010
-:1050A0004000000040000000400000004000000000
-:1050B00040000000400000004000000040000000F0
-:1050C00040000000400000004000000040000000E0
-:1050D00040000000400000004000000040000000D0
-:1050E000000E0232011600D6001000000000000081
-:1050F00000720236012300F30010000000000000DF
-:105100000000FFFF000000000000FFFF00000000A3
-:105110000000FFFF000000000000FFFF0000000093
-:105120000000FFFF000000000000FFFF0000000083
-:105130000000FFFF000000000000FFFF0000000073
-:105140000000FFFF000000000000FFFF0000000063
-:105150000000FFFF000000000000FFFF0000000053
-:105160000000FFFF000000000000FFFF0000000043
-:105170000000FFFF000000000000FFFF0000000033
-:105180000000FFFF000000000000FFFF0000000023
-:105190000000FFFF000000000000FFFF0000000013
-:1051A0000000FFFF000000000000FFFF0000000003
-:1051B0000000FFFF000000000000FFFF00000000F3
-:1051C0000000FFFF000000000000FFFF00000000E3
-:1051D0000000FFFF000000000000FFFF00000000D3
-:1051E0000000FFFF000000000000FFFF00000000C3
-:1051F0000000FFFF000000000000FFFF00000000B3
-:105200000000FFFF000000000000FFFF00000000A2
-:105210000000FFFF000000000000FFFF0000000092
-:105220000000FFFF000000000000FFFF0000000082
-:105230000000FFFF000000000000FFFF0000000072
-:105240000000FFFF000000000000FFFF0000000062
-:105250000000FFFF000000000000FFFF0000000052
-:105260000000FFFF000000000000FFFF0000000042
-:105270000000FFFF000000000000FFFF0000000032
-:105280000000FFFF000000000000FFFF0000000022
-:105290000000FFFF000000000000FFFF0000000012
-:1052A0000000FFFF000000000000FFFF0000000002
-:1052B0000000FFFF000000000000FFFF00000000F2
-:1052C0000000FFFF000000000000FFFF00000000E2
-:1052D0000000FFFF000000000000FFFF00000000D2
-:1052E0000000FFFF000000000000FFFF00000000C2
-:1052F0000000FFFF000000000000FFFF00000000B2
-:10530000FFFFFFF3318FFFFF0C30C30CC30C30C322
-:10531000CF3CF300F3CF3CF30000CF3CCDCDCDCD5F
-:10532000FFFFFFF130EFFFFF0C30C30CC30C30C3A5
-:10533000CF3CF300F3CF3CF30001CF3CCDCDCDCD3E
-:10534000FFFFFFF6305FFFFF0C30C30CC30C30C310
-:10535000CF3CF300F3CF3CF30002CF3CCDCDCDCD1D
-:10536000FFFFF4061CBFFFFF0C30C305C30C30C3A6
-:10537000CF300014F3CF3CF30004CF3CCDCDCDCDE6
-:10538000FFFFFFF2304FFFFF0C30C30CC30C30C3E4
-:10539000CF3CF300F3CF3CF30008CF3CCDCDCDCDD7
-:1053A000FFFFFFFA302FFFFF0C30C30CC30C30C3DC
-:1053B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAF
-:1053C000FFFFFFF731EFFFFF0C30C30CC30C30C3FE
-:1053D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7F
-:1053E000FFFFFFF5302FFFFF0C30C30CC30C30C3A1
-:1053F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3F
-:10540000FFFFFFF3310FFFFF0C30C30CC30C30C3A1
-:10541000CF3CF300F3CF3CF30000CF3CCDCDCDCD5E
-:10542000FFFFFFF1310FFFFF0C30C30CC30C30C383
-:10543000CF3CF300F3CF3CF30001CF3CCDCDCDCD3D
-:10544000FFFFFFF6305FFFFF0C30C30CC30C30C30F
-:10545000CF3CF300F3CF3CF30002CF3CCDCDCDCD1C
-:10546000FFFFF4061CBFFFFF0C30C305C30C30C3A5
-:10547000CF300014F3CF3CF30004CF3CCDCDCDCDE5
-:10548000FFFFFFF2304FFFFF0C30C30CC30C30C3E3
-:10549000CF3CF300F3CF3CF30008CF3CCDCDCDCDD6
-:1054A000FFFFFFFA302FFFFF0C30C30CC30C30C3DB
-:1054B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAE
-:1054C000FFFFFFF730EFFFFF0C30C30CC30C30C3FE
-:1054D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7E
-:1054E000FFFFFFF5304FFFFF0C30C30CC30C30C380
-:1054F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3E
-:10550000FFFFFFF331EFFFFF0C30C30CC30C30C3C0
-:10551000CF3CF300F3CF3CF30000CF3CCDCDCDCD5D
-:10552000FFFFFFF1310FFFFF0C30C30CC30C30C382
-:10553000CF3CF300F3CF3CF30001CF3CCDCDCDCD3C
-:10554000FFFFFFF6305FFFFF0C30C30CC30C30C30E
-:10555000CF3CF300F3CF3CF30002CF3CCDCDCDCD1B
-:10556000FFFFF4061CBFFFFF0C30C305C30C30C3A4
-:10557000CF300014F3CF3CF30004CF3CCDCDCDCDE4
-:10558000FFFFFFF2304FFFFF0C30C30CC30C30C3E2
-:10559000CF3CF300F3CF3CF30008CF3CCDCDCDCDD5
-:1055A000FFFFFFFA302FFFFF0C30C30CC30C30C3DA
-:1055B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAD
-:1055C000FFFFFF97056FFFFF0C30C30CC30C30C308
-:1055D000CF3CC000F3CF3CF30020CF3CCDCDCDCDB0
-:1055E000FFFFFFF5310FFFFF0C30C30CC30C30C3BE
-:1055F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3D
-:10560000FFFFFFF3320FFFFF0C30C30CC30C30C39E
-:10561000CF3CF300F3CF3CF30000CF3CCDCDCDCD5C
-:10562000FFFFFFF1310FFFFF0C30C30CC30C30C381
-:10563000CF3CF300F3CF3CF30001CF3CCDCDCDCD3B
-:10564000FFFFFFF6305FFFFF0C30C30CC30C30C30D
-:10565000CF3CF300F3CF3CF30002CF3CCDCDCDCD1A
-:10566000FFFFF4061CBFFFFF0C30C305C30C30C3A3
-:10567000CF300014F3CF3CF30004CF3CCDCDCDCDE3
-:10568000FFFFFFF2304FFFFF0C30C30CC30C30C3E1
-:10569000CF3CF300F3CF3CF30008CF3CCDCDCDCDD4
-:1056A000FFFFFF8A042FFFFF0C30C30CC30C30C375
-:1056B000CF3CC000F3CF3CF30010CF3CCDCDCDCDDF
-:1056C000FFFFFF9705CFFFFF0C30C30CC30C30C3A7
-:1056D000CF3CC000F3CF3CF30020CF3CCDCDCDCDAF
-:1056E000FFFFFFF5310FFFFF0C30C30CC30C30C3BD
-:1056F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3C
-:10570000FFFFFFF3316FFFFF0C30C30CC30C30C33E
-:10571000CF3CF300F3CF3CF30000CF3CCDCDCDCD5B
-:10572000FFFFFFF1302FFFFF0C30C30CC30C30C361
-:10573000CF3CF300F3CF3CF30001CF3CCDCDCDCD3A
-:10574000FFFFFFF6305FFFFF0C30C30CC30C30C30C
-:10575000CF3CF300F3CF3CF30002CF3CCDCDCDCD19
-:10576000FFFFFFF630BFFFFF0C30C30CC30C30C38C
-:10577000CF3CF314F3CF3CF30004CF3CCDCDCDCDE3
-:10578000FFFFFFF2304FFFFF0C30C30CC30C30C3E0
-:10579000CF3CF300F3CF3CF30008CF3CCDCDCDCDD3
-:1057A000FFFFFFFA302FFFFF0C30C30CC30C30C3D8
-:1057B000CF3CF300F3CF3CF30010CF3CCDCDCDCDAB
-:1057C000FFFFFFF731CFFFFF0C30C30CC30C30C31A
-:1057D000CF3CF300F3CF3CF30020CF3CCDCDCDCD7B
-:1057E000FFFFFFF0307FFFFF0C30C30CC30C30C352
-:1057F000CF3CF300F3CF3CF30040CF3CCDCDCDCD3B
-:10580000FFFFFFFF30CFFFFF0C30C30CC30C30C3D2
-:10581000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8E
-:10582000FFFFFFFF30CFFFFF0C30C30CC30C30C3B2
-:10583000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6D
-:10584000FFFFFFFF30CFFFFF0C30C30CC30C30C392
-:10585000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4C
-:10586000FFFFFFFF30CFFFFF0C30C30CC30C30C372
-:10587000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD2A
-:10588000FFFFFFFF30CFFFFF0C30C30CC30C30C352
-:10589000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD06
-:1058A000FFFFFFFF30CFFFFF0C30C30CC30C30C332
-:1058B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDE
-:1058C000FFFFFFFF30CFFFFF0C30C30CC30C30C312
-:1058D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAE
-:1058E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F2
-:1058F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6E
-:10590000FFFFFFFF30CFFFFF0C30C30CC30C30C3D1
-:10591000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8D
-:10592000FFFFFFFF30CFFFFF0C30C30CC30C30C3B1
-:10593000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6C
-:10594000FFFFFFFF30CFFFFF0C30C30CC30C30C391
-:10595000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4B
-:10596000FFFFFFFF30CFFFFF0C30C30CC30C30C371
-:10597000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD29
-:10598000FFFFFFFF30CFFFFF0C30C30CC30C30C351
-:10599000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD05
-:1059A000FFFFFFFF30CFFFFF0C30C30CC30C30C331
-:1059B000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDD
-:1059C000FFFFFFFF30CFFFFF0C30C30CC30C30C311
-:1059D000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAD
-:1059E000FFFFFFFF30CFFFFF0C30C30CC30C30C3F1
-:1059F000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6D
-:105A0000FFFFFFFF30CFFFFF0C30C30CC30C30C3D0
-:105A1000CF3CF3CCF3CF3CF30000CF3CCDCDCDCD8C
-:105A2000FFFFFFFF30CFFFFF0C30C30CC30C30C3B0
-:105A3000CF3CF3CCF3CF3CF30001CF3CCDCDCDCD6B
-:105A4000FFFFFFFF30CFFFFF0C30C30CC30C30C390
-:105A5000CF3CF3CCF3CF3CF30002CF3CCDCDCDCD4A
-:105A6000FFFFFFFF30CFFFFF0C30C30CC30C30C370
-:105A7000CF3CF3CCF3CF3CF30004CF3CCDCDCDCD28
-:105A8000FFFFFFFF30CFFFFF0C30C30CC30C30C350
-:105A9000CF3CF3CCF3CF3CF30008CF3CCDCDCDCD04
-:105AA000FFFFFFFF30CFFFFF0C30C30CC30C30C330
-:105AB000CF3CF3CCF3CF3CF30010CF3CCDCDCDCDDC
-:105AC000FFFFFFFF30CFFFFF0C30C30CC30C30C310
-:105AD000CF3CF3CCF3CF3CF30020CF3CCDCDCDCDAC
-:105AE000FFFFFFFF30CFFFFF0C30C30CC30C30C3F0
-:105AF000CF3CF3CCF3CF3CF30040CF3CCDCDCDCD6C
-:105B0000000C0000000700C000028130000B81582B
-:105B10000002021000010230000F024000010330B9
-:105B2000000800000008008000028100000B8128AE
-:105B3000000201E0000102000007021000020280E2
-:105B4000000F0000000800F000028170000B819837
-:105B50000002025000010270000B8280000803382E
-:105B6000001000000008010000028180000B81A8E5
-:105B70000002026000018280000E8298000803800B
-:105B8000000B0000000100B0000280C0000580E8AA
-:105B90000002014000010160000E0170000382500C
-:105BA000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC35
-:105BB00000002000CCCCCCCCCCCCCCCCCCCCCCCC35
-:105BC000CCCCCCCC00002000CCCCCCCCCCCCCCCC25
-:105BD000CCCCCCCCCCCCCCCC040020000000000041
-:105BE0001F8B080000000000000BFB51CFC0F0032A
-:105BF0008A59051918F484117C7A607E4ECAF43BE8
-:105C0000F232303803B12B103700F1616E06862373
-:105C1000DCC4EB3F2B8F6007CA3230D402F17E69BF
-:105C200006062B3984B8A10203C312203F0D2AF6C1
-:105C30001A4817CA53E6EEC182555431C51495115E
-:105C40006C552CF2C8580D4DBE411995AF4E40FF12
-:105C500040E3641D54FE042D08FD5E1B42A7A0C94D
-:105C60004F84CABB42FD95AA83DD5C3722FD9DC6E9
-:105C700082CA4F40E3B730A2F2CD38D0DC0F550FC7
-:105C80000000174B67C80300000000000000000080
-:105C90001F8B080000000000000BED7D0D7854D52F
-:105CA000B5E83E3F73E6CCE4CCE4242461C2EF24A3
-:105CB000841034E21022064BEB097F869A7A07AAF9
-:105CC000985AC5012306082452F5E1D37E9948026B
-:105CD000011106B53414D4E14F692FB6918B965A51
-:105CE0008A033E2DB6BEEF059FB57AB57DD152FC35
-:105CF000294ACABB52FBAEAD6FAFB5F74ECE39CC19
-:105D000090E04FDBFBDEA59FDDD9E7EC9FB5D7DF49
-:105D10005E6BEDB5CF78483E29B89C904FE01F2DC3
-:105D2000FF9741087DD4577A7412CFBA98909C3C63
-:105D30002BDE534EC8D03C2B452AE973530B7BA571
-:105D4000FE7EA23C9C332B04EDDAF2AD10A163B4CD
-:105D5000E5CC2331182BD640480121AA4EF09F688C
-:105D6000EF31E7EAA41C1FFDF513F15E21A4DD2C41
-:105D7000CE867EEEF10949127289BD2E1322C6A489
-:105D8000FD7C02DE12FA208F107F959CBCA288C297
-:105D90005D924C41DD0833B80F17BD523386AE63B8
-:105DA0005DB51CF186A1F7AD844C2664058C45EBEE
-:105DB000EB2676D78CC983F76A04DECE54F6B66A32
-:105DC000B4BD5142B07D70623CA5613FCB28A4FDBB
-:105DD00072180824A76C512D091262CED0FAE1C2C4
-:105DE000FFB770FD066FA79738DF1B64FD1F95098D
-:105DF00050EB25D18BE8F8535DEFCB66BD0DE31A70
-:105E0000843E2FE3CFE9BAEE873F0A09F91209E48D
-:105E10009DC8A27F5F4A2E053C909A5C42A69C8D4D
-:105E2000BF7EBCC591BE8430BA68A4EF1FD241E7E3
-:105E300074B862464FA744D7ED8BC8C44B1FCD52F0
-:105E40005ED48B012F4715C4C3BA3A86E77533E495
-:105E5000645CC275D616D2FEA309C363CEF862890C
-:105E60001413B2B185D6C79D8DE7EC928405F4F783
-:105E7000951009F82A9B3E1B42D7953D35857C330A
-:105E8000BA8AE193DCCDF011A7FFFBA4B81F9FD91C
-:105E9000029F1127BEB2393E736A6CF882E755142F
-:105EA0008F13E0BD138F49F883E2AB5EE0319F8C26
-:105EB000453CC67311BF03E1F10A8A832C0ABFFF78
-:105EC000556FD25BD48F57C11702AF26C7EB8699A7
-:105ED000BD3A30C3468BF1392129490EE178925CF5
-:105EE00085EBC3B203F0E6C5FEF85EA7301B7C9ECF
-:105EF000309DC75F9640FCEB141D4324E053435292
-:105F000081AF814FD3CCBB4E4FEA126DBF69AA4C13
-:105F1000805EEB2C998469FD74999A5400EEB8D593
-:105F20001DB2F1A901F8A7F8BA8FE3471B213BF096
-:105F3000A9E6F95D7CEE5CC7A6BEF5597C5D6C1DDB
-:105F4000A43BD901709C99299375D2C0E30E842794
-:105F500031EE80F0F598BE1298F70525B28EF2DA90
-:105F6000BA70B243A6F8DA3883E1E36CFA7EC6F978
-:105F70007A7BF5924ADB7C915EDD2CFF02E62139CB
-:105F8000CE7555993E33ADFE3CBF7988B960743407
-:105F900090991E9F1BFC610ABF0D4F7AD894607CBC
-:105FA0007DFC3D3AA8784276E8A017DDF39C05AF6A
-:105FB0006B5EF73C6A49B3A562CDA987343341D8FB
-:105FC0003C16DBA7087BAE821EA1FAC71F71EA113F
-:105FD000B7FED64638EB6A15D3D72AB13D2F02ED6E
-:105FE0004EF5CB85A45F4F570E4EBF10AB01E17548
-:105FF000EB93315CAEA7EFEDA95329FD4BB6093DFC
-:106000007DF72FCA687D37E8695ADFDD0973D1B2A1
-:10601000CBA9A727F0C1CABFF3920C7A7A47063DF5
-:106020005D9CB0A6819E2E49D08D808E53BC9EE98A
-:10603000E9E28E6619E83481EB097280E149A7FF35
-:10604000B3EBE9623ECF986D4E3C15733D5DBEDF0C
-:10605000F59CEBE962979EDE087F507C154A1C8F09
-:10606000634929E271EA20F73B8E47F77E570C73AC
-:106070008FA1787C90ED7739790C8FED1D3201FD81
-:10608000707A9B8CFA715C51548676424F72D0487C
-:10609000195FFF4EAEAF059C636698D5A04C4B8848
-:1060A000590DF4D1D693482A0C7ABA310EF36C4AC2
-:1060B000303D5D922072CC6607691C9E4DA1DCD9F3
-:1060C00020D7A7136A0496B98B8465BDA81FAF7D3E
-:1060D0007607C7E3D7A095431E9C74CCE17875E39F
-:1060E000675CD2C9DF250FBAE8B1DE59CF71D1E5BF
-:1060F0004AC9657F0C921E5E95C4BDB9504FA25D22
-:10610000A7D3B5E6D3BAF22FCF5AC0D746277BA67E
-:1061100075C8C922CAB7813656F774A8C96A5ABF6A
-:10612000218FF1F5D83849825DA784A204ECCFB164
-:1061300079547FD8F0E9E1F81474833F011F63B804
-:106140007D913D33D707FCBD298FE37B06C33755CF
-:10615000803ED07F02DF1E8E6FA3B21BC023B3C36D
-:106160004E7C4F3AEAD437D7D60D71D4AF890E3F63
-:10617000277D3C9C8E1E4E27C14767E13FEEB20F44
-:106180002B9D758F8B3E2D924BEF0C923EDA115268
-:10619000067C3B4EF64776149DDD2E21C948373AE2
-:1061A00079F2389D7F0135E3B2E9F8CB48CF28403A
-:1061B000D001238CE32C977B0AA07E8AF46E1E39D3
-:1061C000A67FFC512A392051234EA2E85D49411A8D
-:1061D000A693545610C18EEA05B874C48B44FFBB15
-:1061E0001EF94495015FC34DF69CC4B355A887883A
-:1061F000F817463A79F99F852B9FFFB344F128F1B0
-:1062000052013A8E01FCC4506FEA2481753FE9C205
-:10621000D220DD5806A9A686D224A604652E896060
-:10622000492E483E9142FD79B789FCEEFB1DF924C9
-:10623000AB7F3DF7C29F14AFC348F47109FC273A06
-:106240009EAEF4F3A18FF321B5D3906F7593F1ADAA
-:106250005E42F7D372947BF45FDC785ECBF5F28616
-:10626000161DCBF52D262E7268281997297D7CB531
-:106270004C8FE4847A3AC06FF137AB912B68DD6FB5
-:10628000F4BE7A13D87BB76B917B68FDF0CCE74303
-:1062900050EFB8DD60F6611BB353FD1C7B1D637BC3
-:1062A0007B5651B836DCAE47F823873EDA30BEF76E
-:1062B0009D9DA0B76EF34700BF9B4247C2AB405EB7
-:1062C0009A3594176A7B22FDD657FCA208EDB58F4C
-:1062D00029FC943E2842B4BFFE116D3589B61BD10E
-:1062E000DB82767D7377B59287EFE38170FF7A3B2F
-:1062F0008A87E1FEDF71642D09D3973995710BF020
-:10630000E52BA3A62CE5435FA529C50D90CAD8EBC4
-:1063100012E53FFF8C18B128FE0221B3157845E73E
-:1063200074236A2204F2EBC667C7C87868219D37D8
-:106330003E5E8BEC46B632A57969DAF5E17FE61D63
-:10634000D75969ECA96C5942FE3F327E11FABD5E05
-:10635000120B65814E2AD3C86E0AE7BAF18B46C785
-:10636000D2D87B3639E3F64AFA32533F4D21CD5D20
-:106370003678C6CA32F29F24EB4C6E43948FA85CE9
-:10638000E5988C9FB419C44AA681E3720EBFAEC6CD
-:106390008989F6B529819DF545E1EB5D89C1B9563D
-:1063A00022755D69DE6F0778F2413EEE4EC1FE98C0
-:1063B0003D93F135FDCFEAA2F0E7A8AC14ED6B38C0
-:1063C000FC7B78BFF3D043050F027F940FCEFEF223
-:1063D000C2BC69E09DF829E6DD48E79565139F0B8F
-:1063E000BCBBE9294A49F6E1FACE8CDF1C02FB343A
-:1063F000139CE1DB50B79370332D87D2B29697266A
-:106400002BDDF39DEF785F96D93ADCE3925DCC9E6D
-:10641000F2F3FDEBF094572C85D26D749CF0B88AA2
-:10642000537F8C2E93D15FDDB4876EF845A03F5823
-:10643000FD915D24A950549EBEFB1E19E01A49ED42
-:106440007C683F84C464C05B11094B500A3DB88628
-:10645000EBC10F49F43A391FF47417DA45B595B713
-:106460004E4B1737AAE7F2713EFBD45768B9408FFD
-:106470002E82F18DC8318BEEE4447B31BD5CD1EDD1
-:106480002A34D7260F44117CC1E4A99DF33BC8CD23
-:106490001C5A9F777D7A3837CDD48631BBC52C44C2
-:1064A0007F47350BE7DAE471532B952BFA3E09E36E
-:1064B000D9E4E0BB7C7DAD5C1ECE871F6B6869466E
-:1064C0002C4BA1AF6A92891940B7ABA5D86A998EB7
-:1064D00053D11C7956A575634FB7E567CFD7C2F383
-:1064E0007925CDEDC01286D54D40DF3E72F70A0BFF
-:1064F000E8787A045D7A1A3B4194AA253BEC147D36
-:1065000084DF690F0D521E2F8824A601BC65E1634C
-:10651000D5B961A0536C1BD069C4D1C86158A251D0
-:10652000772C956FA357D8646523004DE1D7E2948B
-:106530006E488F6808E8B198447742FF406594C57B
-:106540002B07094726FE0F8798DE0A737E6F8F5050
-:106550007E97FAE5C1CFE5A19DBF3F5D49D0BF68F9
-:10656000CFAB30D3ED1782DF05FF0B7DE86E77F8F8
-:1065700053F0F9785A961213FD9A0F49EC39C0037B
-:106580005D3DCA9F16EA42FF4EC8556DE4D88C2186
-:106590001047AD0C5728B6FDFA7DCE770B74EB97FC
-:1065A000D07FDEF50BDAF3291EC6DD4D22A066AFE3
-:1065B000BD7E01B1F3FBAFFBDA475F42F9BABB1B0B
-:1065C000DDD281FA75F3F55D2D455FB3F3211DE74B
-:1065D000751CA7A43B2EDBF44E0EC7B332B38F3F1E
-:1065E0004D10CD9ADB122AD0A7A236A248B6755C10
-:1065F0005BE7B4E729BFBF03E3BAF9741E69F690FD
-:10660000F3D83F4649B15E80B7B6A4BB0DE0D34294
-:1066100051F4F728DCA7E1F91700F727E782FB1D03
-:10662000887580DE8C545B43C2089FAA5C027E544E
-:10663000AA2D3F0C783FA602DE299E35C586E7C10C
-:10664000CAF9FD7CBF1848DEDBE00FB49763790A16
-:106650006D3F4467724A7A8E11E67739E397C26ECE
-:106660000E8608C659736A7B08F86B171F55D0DE73
-:106670001D5A4B24B0C3845D3BC475DEB001EC668B
-:106680002A3FF7B58450882E367A8FC239C08642A9
-:1066900099D9C753CE0C83FE3FAAEE09813F6856B5
-:1066A0009D59775318ECED30B65FDB12E1FB4F15C7
-:1066B0009689DAB7F6ECA4F36F08F9D15EBEB7A5F8
-:1066C0004CC46B11EE2122DE5BCBEC7B11171670F4
-:1066D000D1FE3A0FB63ADA93900D6FC5B6FE61A6B9
-:1066E0006F06EA9F55E9C47B5F7F6B70FD21DE6F0B
-:1066F000EF5F6DF51C85F89CC9E3FE42EF05791B41
-:10670000B34A46FF59E0D95BE68CCB25F8FC99F8F3
-:10671000C53D1F09FB1DEB27F106846F05978B4CC8
-:10672000E3B473FD28EA1E92DE6E5BA6F07D929FB5
-:106730004B997CAE1F594E7C5C2CE87790E3CF647C
-:10674000F22EFC1A8C0728F6F9D83AB08E719A38D6
-:10675000D3C72EF8457F8DF7CF0487E61EEF381D8F
-:1067600067B26D1C179C99E0739F9391779CE364CB
-:10677000D65FAE7E27074787B3FA119BDC633DD710
-:10678000551FE66A5FEC7A7F81EB7D85AB7E99AB26
-:10679000FD3457FDABAEF6735DF5EB5CED17BADE7D
-:1067A0002F71BD5FE1AAFF5767FBF2C59F0EBFFFC8
-:1067B0009FE149C8D5D978493ACE79DD72554C5216
-:1067C000A352B4DC91F3E22278D5A348EA099847B2
-:1067D000C4B7486A82DD8FFDBD11FB1DEC633B3EF3
-:1067E000B6FC512A57BB122F05617F13CF4F4A6F5A
-:1067F00004C787A97DA8A596B3785002E5C64FD4F3
-:10680000B77ACA804A12C6D174A31E51AE97D0E798
-:10681000367DE52551A4B336C2F99C24981C9640D8
-:10682000808A8E17DFA4A1BD171F499263419EF392
-:10683000D8F8D8BEB81FDE492AD34FA168A21A647F
-:1068400078585DD76128DD780A4D8F4F7C9EEA65C8
-:10685000F200F3CB77CD74FAD5D7F171E6ABE7ED63
-:10686000A7BE3249E91F7FD7B78D482B6DB20B8089
-:10687000A0F5F8B7F524C4374641BC8E1D2260BC94
-:106880006E24E1FF785C6E04FC4DFB8D348E62FC5F
-:106890002DDC601E019DF775B514E17A44EA1D0FE9
-:1068A000F3C9592727B2F3BDBF7E82F1788EAFD0EE
-:1068B000BD937BE2104FD9A845C6229E238867EA84
-:1068C0008FB7792B804D187E57C1EECB9EAB815C84
-:1068D0003877E1F400FD4B4B1FF013EC8B2485F56A
-:1068E00000E9C17A36B773CBD4225C7F0EF7330947
-:1068F0008948607F84AE4CEF9747A5EA32F592FE57
-:10690000B8A51466F14969FDF37F9620AE5546C2DD
-:10691000CC7EE171C2B58AF409C45FCDC1D98BA127
-:106920006F3AE94AD46632C7E65F5EAF0A3F8FE14D
-:106930006B4C88AD3FB4516B06BF66D76C271F8880
-:10694000F6EAF9F3C1E60963BE383EC855C764E00C
-:1069500083EB4D88574B718AB7ACC1E3CD54AC6F14
-:10696000AAB84E82E3FE40B26EB0D75562DDA8E60B
-:10697000F7D77FAD4417C2FBF83452D66CF48F437F
-:106980009FDF0CEDD23C6F48D77E1C8FDBD2FD1908
-:10699000F7F152AE03866E3365B0278B3A57F8EDA8
-:1069A000792EA57CBF7EAC739F0FD6BBB5F1DCF60C
-:1069B000D17D2DC8FC19DB05A5EE28D0835CA29201
-:1069C000DD69CEB17FCAF9BBAFBDCB3E9CD116AF5E
-:1069D00086FEB97532817834DDE7D1BE2BE27EEDDB
-:1069E000E6A97149A372F8C0168276726EDB429FE7
-:1069F0007D3D857C3D9B6B0BFC60B76CAF5FF855B4
-:106A0000F413A8FDAFA0DF1B5B07E317D6B0F37E3E
-:106A1000377CF7F2F525EA199EDCEFB334124B27E9
-:106A2000873F55F9F9834ADDC782FE73947B0FDFF8
-:106A3000F98BF174BED22A39E20BF7C339AECF6EAF
-:106A4000EA417C655DA69AEB400F776A0E7B73FB8B
-:106A5000B6FBB7D4C3B91F7D0EEAE0D12F370F8B39
-:106A600052B81EFBDAA2171603DFB7CB04F49180ED
-:106A7000C32877DABB47FAE4CC392F1DB71AF15295
-:106A80007F6EFFE9D3E2630B97F34C7CE2DE57DDC8
-:106A90007C703EFBC355CA675FDF7E90433A6E0150
-:106AA000F7FB86D685A51EA35F8E849F22E629E08C
-:106AB0007C965B7BBF0FF86C4B5D05CACFE9DA852E
-:106AC00012E8934DD0328D9E10F3658227CB93C090
-:106AD0007C892DF5F74BE9F0561863F122F7F36A3C
-:106AE0000FA3F37A352141FF4CED467BB8BEE67229
-:106AF00055C8D7159A9A8A02BE0A222AB987E2EBAC
-:106B000081DA85D5A5C077540E21BE32A386A0BDFB
-:106B10005068B1732293E2EB69BAEF6DAE2791141E
-:106B20006DB7D9D2F01CC62D876E7EDC5C7F6EFD02
-:106B3000422C5B7BCAFF1E8FC1CE734B4809D853D2
-:106B40000F0CE0BF0D16BFA17A99C54B67540CA07E
-:106B5000CF5BCF378E39EFCBC08F33069907E0D2AA
-:106B600017E4D92DB34BF3201E42F50549871FA723
-:106B70007E18081F6EFC5F0CF8BCF08BC3A7FB7D72
-:106B80009E87C70107898FF575C5FF03522633B568
-:106B900077AF47F41379615F21BD0AC8BF051C3A7E
-:106BA00006BC8A0896334814CB636A2CEAA1ED67C9
-:106BB0009166ACD79004968B5593D199E7C188F331
-:106BC0006E753AE3FB719792249C3B93A973F9612C
-:106BD000B06A9DD00986523F49E35711720F8E3734
-:106BE000DCB51F8B38C5D0C6446D051D77782DCB1D
-:106BF000FB1C5EB5CFB18F05B9FC88F1B6560D6EA2
-:106C00007F7ED4B53F3FAAF6E8409F47ABEE69854B
-:106C1000ED46CD7D2794AEFFB84E275E377CDCE590
-:106C20008BA681676BFD011FE48D6DAD4A9F17EB4D
-:106C30008623D3FB7119CE99BEE265E74C5B73F4F2
-:106C40006FB0649D958EBC04A21845F679B77E4C52
-:106C500072A2E7D4274E79D9E8E1F921011200FEAA
-:106C6000CF840F517ED178786C5AF392689AFEA542
-:106C70005E2637ED39240EE7D28FBDA632FEE37AC9
-:106C800078F237C249B017DA414950FDFB5835E375
-:106C9000CFC939FCFD4361CCAF1ADE49E21ADDCF22
-:106CA00086BF5AFF400E6D775F3DF5206DCFEFAB8D
-:106CB0007CA903CE899F7A59C6B8EE645FB71EA13E
-:106CC000F054F17D706BFD4B989F1CDFA646C6A269
-:106CD0007E97883419BD79A48780F7198FCAE85642
-:106CE00079BF2F0CFB57B8478F50FCDC3EE5253DA4
-:106CF0004CCBFB46A47458E7FAAAFB91CFF7D51703
-:106D00007FBD14D1EACC3B99A54CEDB6E87CEBEB0A
-:106D1000D9B95D4E4F4AF7429CB54E255750F8827F
-:106D2000065BEF7DED24798F047030FA4A640EFA29
-:106D3000C585AEBCAE0257DE9B5939EB5DC86731E5
-:106D4000E19C1F16A1343E7011E8DB2699B95BAEB9
-:106D5000FC68A3D27A17F2036629077D907FB5A558
-:106D60004D3571FF738DEB5E874962872D09C789A9
-:106D7000831FB8E541B64F9A138D483C0C5D39DC52
-:106D800026857B089DB2CD09B7C0AB7B1E77DEF5AB
-:106D9000BB829F8793B1A08744BC59C0EFE6DBBCA0
-:106DA0008AE4FE97281C5B5F3670BFDE5AF5D23747
-:106DB0009B609F2FF362DEC457CFEC69FC112D7FDF
-:106DC000F9C70325505E59B8ABB289B60BF07C0900
-:106DD00011CF2B8091D17EE57A8DF30329DFDEE69A
-:106DE000C9C347984771DF111FD2ABB04D4EFA802F
-:106DF0003E6A8A007FE55D9640BBE9BEEBBA31E9A9
-:106E00002250D725C56D721610F643634C82F3FBF2
-:106E10002BEA12B3810F0D9E47684412681FCD54B0
-:106E20005ED431CECEE966723884DCB9E9525A9F1D
-:106E3000D2212F65789B1A0170873736CB202FA57A
-:106E4000552C6FB9B4B34BE279C2984F3F8E237182
-:106E50005CB481E5156E63F817F9DFC14627DD4C98
-:106E60009EA749FD0C19FCEEA24ED7FB680DE66308
-:106E7000BAE95AACF1BCA8529E47C8F1309CDBB3CA
-:106E8000EB1BF9F99CA127CF65CFEEE3E7734761D0
-:106E9000FDE3CE7E3F2983DEBD0AF42ED5378A9CE2
-:106EA000EA40FFED3219FD37371C1B1A99BEDBA5EE
-:106EB000C90EFBFDB3CE7F03D7FB8ADCD301EBFC0D
-:106EC0005BCFDFD8B7FEBFCFFC77FD9DE75FF777DD
-:106ED000C6FF96BFF3FAF7FC8DD75F532639FCB394
-:106EE0001D909842C7FBB157C4D39C7A5B91D3FBEA
-:106EF000D96F69B2239F58E4294EAFB31668783E24
-:106F00002E137BFE8B186FA6F24607E8D32D5C9FED
-:106F1000523D4A205F207B8AC89761FAAF86EBBF5B
-:106F20001AAEFFF665D0AB15902B96877605DE0777
-:106F3000994412E8C7048FAA9867BC8FD0ED05F476
-:106F40005AD89B362FBB80C3EDD6A7055C9F56BC95
-:106F5000E87ACEF5A87B7F2FEA8B9B128C9BFE777D
-:106F60008DEF8F2EBD2AF0B0A58AD9C97973D3DBF6
-:106F700081EB5D74342A9B31FFC04D8FB734E67FBF
-:106F80000B7A2CD0ADD7B5FCCCF4EEE1F4BE9CD39B
-:106F9000FB571AF33F44BE48267A5779D93C9706E7
-:106FA0008E875A6135D16AA483C2E9A490F5DD18B1
-:106FB000F725B713BB5FB9E1636A7F507A6C358CF4
-:106FC000C83DB47E691E9145D2FDC793FBF3893D50
-:106FD000DD2C7EAAE4692E3FCB6DFFEA9837BED543
-:106FE0009293F122B023766C5D0E76C4CBFE08C47A
-:106FF0000BB6E674BE887E5C62920A70087B91F0E4
-:10700000B82C981204ED26F7B993D3DEDFFA715746
-:107010000AEC2EB348C2785F47F8FEBCB4F7F15CC7
-:1070200076BEE10D38E206E48AC1D9EBAB38BDA9E2
-:107030009F98EFB5C5295705664D62E7E6334C3892
-:10704000DF91AC5932C4D1338D0311DE13B6F3A6F0
-:10705000C5AA3512C693C06F2CEBF71B0919C1E204
-:10706000F262FD83BD3FD0B8989D7B73BCE65DD6D0
-:10707000F5B9F88FC2DF17ED0C6AAFA5BBBFE3F619
-:10708000C36B3CD614EF258387FF116038DAFE8589
-:1070900072A5265DDCA087EBD7C0D1AED973E9FA23
-:1070A0002A5FE4717D6AB6D9CFD3EECB53D3F6FF16
-:1070B0003997935FC1E548D4EBA978BE84F92404DD
-:1070C000D625E4D13DFF443EEFC4CF38FFCB5CAEC4
-:1070D0002772B9262482E73099E6ADE67A43949F79
-:1070E00076DE1EBEEE6ACDE471DF73CF3B87AF73F1
-:1070F000CE675CEF493EEF9C41AE77019F6FC16761
-:107100009CF7233EEF8241CE7B2BC7EFAD9F11CF83
-:10711000AA2EF1710687E7563E5FEB679CD7E4F332
-:10712000B60E72DE4D1CBF9B3E239E47F07937B9E9
-:10713000F09C497E777CC6F9CA74263FBBB8FCBA7E
-:10714000F59A983F502847A1FFD6101DC7A6A7AEB5
-:10715000F4B2F94549529FA0DF3A9C9FE74E597E11
-:10716000C7C27479E1A2BD7B3FCE34CF37799C464C
-:1071700094629E203F079D72199D27CDFA44FB899A
-:107180007058909F79FC251C9E25E7B90ED1BE5AF8
-:10719000637A36D3F8777238EE74C13FD0F8A2FD27
-:1071A0009C01E0EFE070749C27FCA2FD8201C6FF09
-:1071B0002E87E3BBE709BF687FEB00F87994C3F142
-:1071C000E879C22FDAB70E30FE931C8E27CF137EDC
-:1071D000D17ED300F87996C3F1EC79C22FDAEFEAC9
-:1071E0009377A7FC19E2FB06115206F7BC47117F03
-:1071F00004BF6F10E9398CDF3758A985F1FE799704
-:10720000FB5E94ED3E1515F1C37796C6A1FDC38BC9
-:10721000599EF2C31309FA110FE7B3BCFCBE7816EE
-:10722000B7071F9E28633CE9E190338FD9E0FED970
-:10723000C3111E2719C1F2988D72719F964E57C0C7
-:107240004DC430E4D3B0FB55C2DE13F7AC56A97C75
-:107250007E8B245B69FF87CB597DEB0C92948B6C02
-:10726000F7AFCA52780F080C5B88C3F6DF1FB3C8AC
-:10727000CA0A5B1EC6CA14E619A83C5F8422843879
-:10728000F2315CF7B6C4B9E135116B26A8B9A24A50
-:10729000768E571475FA0F8D70998BB6FF2DD79394
-:1072A0006665FA7B357B75169715F99A57F3F50BDA
-:1072B000BC55707A6E98F3C7EEE9749D2F4CF5605B
-:1072C000FEE80B47391EA72A49766E4E3CE9EEE3ED
-:1072D000648AB3199DCD477C143FD7BC482240C671
-:1072E000C036AB3D8C71B58F91FF30AE46E7BD66C1
-:1072F0005B4205FE9BDD199E0EF1C0AB5F0CAF82B9
-:10730000EF0A8CEB24110BD0FBF1B7709CDC36122A
-:10731000493252B59A2CDEE78CCF897BBF3C3E07C1
-:10732000616ABB7F399BAFBBA2CD6C8723BB8A1937
-:107330005E87FD3A9BFB99FF64791D7EE66C7E7F3C
-:107340007AB6CBCFECD49DF13AA3333A13E2DCCA40
-:10735000D5C72C1DE08F4A265C4BB921BA498573ED
-:10736000E4D9DB9AD9BDDA0CE75AD90FCD0DD8EDA7
-:1073700077718EFDAB6DE7B6D7459C41C41D5EE1CC
-:10738000F7F15EE679C57DF9289C3F72AF961C7CCB
-:10739000D2A9333DD2097C92FF9F7CF279F3C96F69
-:1073A0007467FCA113DE51792C8DA43F9F6FD0B57B
-:1073B000FF94D72F800E415F7A3A90C66C471EB17A
-:1073C000C8A772E36D0DC79BA8EB19EEBD8CF0F159
-:1073D0007DD6EDD7BF11AB867589380D2177B9CE33
-:1073E00035A746CE159750C4B98FFC8602EB29F31A
-:1073F00071FDA31215C777AD03E5BE00F20D390C80
-:10740000AEF1DA415F78FBD7E529895A12DE1725FC
-:1074100078CE07F9EAFBCA617F341DEBB67C6CBFFE
-:1074200059C7EF0BAD2B5393592CAFCAF9DDA2927C
-:107430001D7A3ABB4294702FD59EE7E186572B897F
-:10744000C5EDF0681C1EF7387333C2D3E0887F9D0A
-:107450002F3CDEF1847403DFAA948B917FBFE51883
-:107460004F2E4B929E7471283E0EDC55C375B9E8C1
-:1074700092697E7D8433FF49CB73DE4F518D5C571B
-:107480007E948BBFFAE242839B4F7CCF6735E783C4
-:10749000367E1FC5DDDFA72648240DDE7D61771E01
-:1074A0004612E9E00D39BF3BE0315D70BBC65F0FAE
-:1074B000CFD2E4DFB8EF57AE5593686FC5299890E7
-:1074C000E7D9CEF9523593782FEB3B3E29EDFA49B7
-:1074D00024FD7EAB96A487DF7D2F48CBCB75D221D0
-:1074E000C3FDDBB542EECD5D16F00992260CFFE739
-:1074F00096F3839173EDE759426F49BF513EA14B1B
-:10750000DAED737D2F6190F4553F1A029756FBEB2D
-:1075100054AF42BC96CA08E6F1BADB1F13F87B638E
-:1075200007C22FF474D636914FFBE9D601B906ECA9
-:107530007CDCD93FA31C723DA770BE7E6E80F567D0
-:10754000A2AFBFC49D4F3838FAFA40EE61DF532D29
-:107550007E88EE94FB4CF31193ADF77CE5FED3C22D
-:1075600039A42646409F69A11889D17DBE309490E8
-:1075700020CE6048BD71F0C7A84C8581CE1BE1527A
-:107580005DBEB3DD34DACF5324C73DD9207F91C32C
-:10759000D03E1E225DD07E7D9E5AB3A3BCBF9D21EE
-:1075A0009128F0BB91AF46E1B9182F7BAA733C6AD2
-:1075B0002628F67B58EEEF2D78A630FF54A376E808
-:1075C000F674FAC4CFECD0AC677D78AF2F1035924B
-:1075D000C092859549CCE32C6C2011F0E74A3BBB67
-:1075E000498C0EBA96C3515899C0FC80C26D093CB3
-:1075F000B7CFF39266D8970B1B13D202DB3C657EA4
-:10760000C6DFD3E6EAB84F7CAB9ADDDBEB0E2D4C40
-:1076100054C37C55ECDC2B90A79261141F8157BD9D
-:10762000CCFFACEC816F49B07C11FAFE9D16525133
-:107630003F9690F75A742C4FB698589A1FFFCF1068
-:10764000E4B7B45F32390CF90867020DA361DFF8C3
-:10765000A02584EFEFFB76240C7944CA91D7F03B48
-:1076600012FDFC1E574815E4BFF658403FDBFA7781
-:10767000F86CE7FC7DEBA2EB5D40E7B957926F84B5
-:10768000F9A0BE10F95457B4028EEF30C333D89727
-:107690009E76127DA21CBE6792946E2DB73DF75167
-:1076A000BB0DF6D74B4CA47B3F3E93AD1CDF13C103
-:1076B000DF2D7C91E3756ED539CF4DD6B7A4BA676F
-:1076C0008CEDAF1B19EEBBCDF54CBBDC4FE7990938
-:1076D00097D8299F4F9F5B3614F0F5A0C7798F5C30
-:1076E000948A392952026DE38532CA21FFDECA8AA3
-:1076F000F1E1A139B6F16772F895233F41FC669537
-:1077000027C477776A0B6D79FF23620DEC3B7ECD42
-:10771000EC7E8C38871C7D7D4F2B1C498C5EE9BC30
-:1077200037338BDFF32C6A9731EFB5680AEA505292
-:10773000D44A30BF6AA712A900FE7E88BC9C632988
-:10774000B02B1332928A6A51DC39CECE45B5CF4385
-:107750001C40DC1B5DD5C6C61B158E1C0D43FCA44E
-:107760005C467B793489E830FE68432670AF680C4C
-:10777000B18D43EB239B9DE3BAE12D0AC8F8DD02EE
-:1077800001CF28B25FB7F2707C92A4FD4750376FEB
-:10779000781AF8DCF38C11ED2EAAA8489134F392F4
-:1077A000DE5638173A6BFE01C66DF1F7E5DF05418D
-:1077B0009F6F93D8FAE32F2891DD40D75BF760BC29
-:1077C00066C48A4EDCD73BFDCCBE5B4DED01C303E6
-:1077D000760A2DC766E643C5A488CBC6FD232DFFD8
-:1077E0003DE6AFDEE88778987FDA46E043BF1ABE11
-:1077F00016E8E13FEA21708EE9B712287FA484D908
-:1078000019F796176783BCF99BB5B4FE5A9BDF83C3
-:10781000F06DF34B2AE48352DEC275A98DE1EFCE01
-:10782000A2D5FF966F3D02F3BC9F1FC3523C0F2DA4
-:10783000AC0B037F4EBFA51CE35FA73B258C7FBD30
-:107840002D253548D15E7A75F3842B283EE6E4C4B5
-:107850001E857E8D75DDCFB333DAE652F0EB6A21FB
-:10786000CF2F1FA68B337F70C45B1115EE838D5015
-:10787000539E207CCFE7C8ABAC8C5703BFEB7003A3
-:1078800086D2335862BD0B7E5380DF3F52486F5C17
-:1078900002FF682A216FD9E8063E9DBD0E67BAF641
-:1078A0007A26FC0F54D6D3BE6F8D855D3E62496843
-:1078B0001724D97710CCC8048053091D2D28B1EDA9
-:1078C000735EBE3EEFF485FC7B4916F76F22C4EE73
-:1078D000DF7AF9BA4087BF65EBEF0939EB8AF9F92E
-:1078E000AE43D8DDD2337F3901745CF5A407E39E43
-:1078F000D39FF4A42EA7F565DB25DC67E4434CAFEA
-:107900007FB04B42B94F0534D403EF9B3AD69BBCB2
-:10791000DD1BBE44EBBD4F2A6407A2A50EBF2F7529
-:1079200042ECA707587D117790966D3F3C1FC66BC0
-:1079300038E025B04F2CFBC92D577D89D66FA17C2F
-:107940000C4D96ED6ED586D1FAE2A4D405F553D34D
-:1079500008F2593C574B425ECBA96077C13506EE21
-:1079600063243C0ECEB7BB0BAEA6FCB824F9C42CE6
-:10797000E8B764AF049154BA8EDDCF1752B8967D44
-:107980005FC2FD71E99E2C12B6E1F3045DCAE5F415
-:10799000FD0ABA4ED087B790C42CA0D7B2DD9B3475
-:1079A000FB3EF75E4B19A67E88FAB2EFD37968BF2B
-:1079B000E53F9422B0C4E590EF00FBE54F7C753BBA
-:1079C0000D585FAB561A8075ADD1A0DD2DC9054F9E
-:1079D000F9C200DF766D167DBF64DB766D5139E04C
-:1079E0008DDC08FBEAD23D1792B08DAE273A15F434
-:1079F0001756E4E83BF07BA286159A9B261EF25EA2
-:107A00000B71C0B584EB0DEAF769736CED9FCACAC0
-:107A1000413E5DBA4771CC23E81F3F46D83DB49F35
-:107A200005F01E9AA09FD8AF04FD56880FE5A9BDAA
-:107A300093D3C103DFD5027812D4BF81F2FE961032
-:107A4000960FB684914E9B018FE3585E0A3CA77255
-:107A50008BDFF30B5AF0A129B88F625543FE656E98
-:107A600094D50BAE8F49E173D8E9A2DCEC892D00E7
-:107A700023676AD6F766AAD41FDBACC56E8590B5BE
-:107A8000A9EE983983EE798D59D1C959B673BFD50E
-:107A9000FC3B3217678571FDAB0B35C4F7E61B263F
-:107AA000EFE4F127DC2737DFB0E851888FD3FE5FA2
-:107AB000C902FF829FFF65EA5F30BFCAD1BF607E07
-:107AC00083E83F0BFBEBE7EEBF79FE65CEF9E72FCE
-:107AD00011FDAF42F88D73C35F70E354E7FC373696
-:107AE00062FF262FA36F6F8E8E79D66DBE48CA03B4
-:107AF0007456097E875ACD2DDD01EDC4BE432D4B52
-:107B00000BF2B68DBD3915EB889D8FA6CD073802D7
-:107B100054BAEC7C945DE577C8558E95EBA80FA917
-:107B200019E6689F1F2D76BC1F5A77818B2F0DBCDD
-:107B3000B78875000A0C730AA7364C437D543D8CF8
-:107B4000D9C1771CF261FD8ECBD8FAEE1866A01C65
-:107B500003CCE097DFA1C52EB67F2796AE4B82C33C
-:107B60009C9B8DD89DB08EFEE761199EFB79BE93DC
-:107B7000DF4B50DFAD299ABC336EC367C748CA0FCD
-:107B8000B4DE96A531BC733AAC19B92864B7D7579F
-:107B90008FD4EAC0DF80E73719305F7435CCD7A4C3
-:107BA000F59682DDE19EC75B5CE598471FD580F3C3
-:107BB0006CCA62F154318F7754836B1EBD6E077FA0
-:107BC000CEE77900F82CD33C6B8A2F73AE67D412C2
-:107BD0009CE761D73C6B462D71CDE367EBA1CFF9F4
-:107BE0003CC973CDE31D33D5B99ED18D38CF3FBB92
-:107BF000D733BAD1358F81F3C07398871ABE61F835
-:107C00003E96E6ED5D84F47FC687768EE68D3D86F2
-:107C100076CEEB3EB473682B0BBFA355C6FCDBDB03
-:107C2000B272913E67FC94FE869DCE719E7710479E
-:107C3000BFF8660E22495288A87E5BCE79B07EEFEF
-:107C40009C51AD501E981E5A00FEE883018CE37DC6
-:107C50007060BA76531A7D7473C273A2C7C6CF7DA3
-:107C60007A95C7634359EC1C52D44FF0F8CF5B10A0
-:107C700027A2E5DB1E82FED0711E2FEA87B715FB17
-:107C80009DE0E77A27B6B17DEACCA663ECBB3971FB
-:107C9000F272F964F81E0DFB777322CBE18F377116
-:107CA0007AF4FEC49BDC81F4B086E3777F3B8738AF
-:107CB000E285BF39F4B5E759DE1D190EDFCBBBAE47
-:107CC000E389E7A0D92BD282912BE87AEBF66FF209
-:107CD0000CA7F50F3C3DF323866D9C3A0FDEBB17D6
-:107CE0007EC837621E87FDFCCD0667FD06973DFD09
-:107CF0004656B1389F65F386931EA0D73C3863A5DE
-:107D000024BC014A4CBE33915EF34DD657C0D374A8
-:107D10009787A470BFEBC9C738673C1FE33431B104
-:107D20006FB9E09BEFD1AD28A5E7FC3B15C4A31BC1
-:107D3000DE9E4359964CFD9C9ECEFFED81FB3B039E
-:107D4000C17FE34AE77B12F738BE4320F8E0DABA96
-:107D5000EA9DC76DFCF18DD8EC9DC71D789AE3A80C
-:107D6000DFD0FC0D47FB1B572E70BC5F105FEC781B
-:107D70007F53C7AD8EFACD893B1DED6FE96C75BCA5
-:107D80005F9C5CEB78BF74CF26477D59D71647FBC5
-:107D9000A603DB1DEFE543E3FF09FDC05F2978CFB4
-:107DA000F943E3C406B0DF3E34D977FEDFE1E7777D
-:107DB000EFF1EFFD2C07DE9B02F2334907BFA1C9AB
-:107DC0004FE599DA12138CFCD51D53418F10FCA49A
-:107DD0004685317C759C3ABB53F8BD44A55323A915
-:107DE0002170BCD21F87ED55FADFAB3DF4FDA4CC6A
-:107DF000EF954E35ED7BB5474D3BEE29A9B714EC19
-:107E0000C7F86BDEB4F7BFFBE5920C87FD22D3FB0E
-:107E1000933269B0FB6FF30C161F7A3E6BDA3C03AA
-:107E2000FC218DC97BE3BEC269E037346AA9D274F4
-:107E3000E7367DF37549F89DC079069397C549E704
-:107E4000F76F97EE19E390FB57FDB16B0CDAEEE498
-:107E500061857D2F2FF5ECA8AF5F04F35BF3E0396C
-:107E600039908FFBE32B2DD6CEE3D40F78B5A50642
-:107E7000CB7F6D89EE3C4E1DB5375AEAB0FEDB96DE
-:107E800018963D2D0D58BED5D28CEF8FB7ACC4FAE5
-:107E900089963896EFB47460F95E4B02DF9F6CE907
-:107EA000C4FA072D492C851C087B9744B93D290E3F
-:107EB0004C08AB9FE66B500A441C3382DF8F3A6D4F
-:107EC0009C29053BFAF4AB5ECCBBCD842737DF653C
-:107ED000A69F85FBFDA2A433CE2C4A9F9FD1C72726
-:107EE000931AC891583B56C3389AFF990BD11EA7D5
-:107EF000CF55C2BEB71CB17F4FA26F7C481E1E3A41
-:107F0000309D44FB13DFFBF7C90BCB813EC58827AF
-:107F1000FFB34A33A3DBCEC8D72F1A187F68F315F7
-:107F20009E8D47E999DF8C82F8D4FBF9029FDDA38F
-:107F300020B8A51AD12DC087A7F77B715DA70F6662
-:107F4000B17C1408AA0D22FF75E91E5FD2AE1F9600
-:107F500075E5249DFAA23069D717A78FEE0C82DC55
-:107F6000AF0829C9E393803F2CCE1F8CEFC4F8CB18
-:107F7000BA8A9286631C67FD7442AAE9C2B858386F
-:107F8000FBEA34FE87285784349CE7BD3D6330FF0D
-:107F900080FA89C9E32CDE9964F3869276BE6C5C24
-:107FA00099953C3EA41FBE4CE37EDEF011B29FFCCF
-:107FB0004ECF7C0F77A092A8FFA6E1F72D0F7ACEC7
-:107FC000C0BEE3A5FF7D82F9422AD6C5B84D5D4A01
-:107FD000DC0BF778C95EC77CB45F58F8E8F6EFE6CB
-:107FE0009C4D77673EF86F819770DF66F7CA6370C4
-:107FF000AF9C8E774A353AA48BFBEF953771BE5C08
-:10800000A6F76831FAE8FDFD63CE990FF25ECB5119
-:10801000531D0B790409FC604443D7F819A01FDFF6
-:10802000DFBFAA00E2694B95D377A4BB2FFB91C1B8
-:10803000E26C24E9E9EDB1AD47C46708A1E3EAFDCC
-:10804000F003A79FB0D5DDFA5A947280C5DD97EF93
-:108050003D36EB4B14FEE507FEA8011C078C981C6F
-:10806000B0AD5FE2F7EA97EC795383F5BDE389970A
-:10807000DE750E3D75369C46C8711E1A27DD20C779
-:108080000BD96F30003F5DFB3A15CD777FE921F0CA
-:10809000BB0EE2BC42DC7BA827D120E06BE1FEA551
-:1080A000181F7EF7A92BB93D97980CFCF13E916BF8
-:1080B000607DEF939782936CF82B09303F86743084
-:1080C0003B46DC0BA4F6ACC3AEB9A5D3595F44E67E
-:1080D0001680DE58F4A007BEA14A1613DBF797E816
-:1080E000BAF302CCDEBD8534AF067B4EF532FF60BD
-:1080F000A149D4E1549F2EFBF14393C1EEBF30C0A0
-:10810000CE1D451C63712EB3F796E42535384FF824
-:10811000DDFE49F3BE04DCE74DAE867D9964A73FE2
-:10812000FFBBA9C309DF40F0BBE115F7DDCF8AA78C
-:108130007038943D52DAFCB42901CE775C8FDC13A1
-:1081400070DAF96B5CF5DA008FB32A44013ABF6F3D
-:10815000EA71391BDFE3FDDAF83E6F645518BEA7FC
-:10816000158D027F51BB6002B1B5FBBD11C3E7277E
-:10817000A51717E1FD72353501F3F174A2DA7F8F8F
-:1081800041F10727908B214EDA8C4EFD2A5F700754
-:10819000D45707D83DA8269053B83F1D9C7514E2CC
-:1081A000FA3A49A4AC2238FF76C6BF7D61673D0B21
-:1081B000E409F4093C007A4408C68BB2CA9CED027B
-:1081C00011677D491F9E528AFDDE47503752F87B6A
-:1081D0004D55EA49BBDDBC5C67F013F89E2A6D7F04
-:1081E0001BB7E79793701CF316438C0F6E9BCDF271
-:1081F000266E0B84F15EB2A45A783F620D74B5ED21
-:10820000634D1F492469D3EB4D6AAF067CD9F491C5
-:108210008ACF1F3662DF06BC6AC4423B57A7488339
-:10822000F36BD5A871D8BD6404FF2EA02B7F617DB0
-:10823000C074F87B422F78B85EA4FA624D201FF418
-:1082400060EF2C76AEDEA3B1F31DD64EEB6FB71EFA
-:10825000E0C8D4CED7DF6E53BA76CB7EFCF853712C
-:108260002AEF4B7EF49D201CA6BDAB260A20FFA161
-:1082700071777B10F8F81D351E8475BF9B4C9FF7F6
-:10828000FE73AEEF20DF09EEC92FE7747AEF07F730
-:108290005E05783FB3DB83F7EC9BF678535E4AC408
-:1082A000E5FB17337EDAE37D93D5D7E0EF2E341D5F
-:1082B00070CADB92C7BE5310C6C3BD38F31B490A50
-:1082C000EDE7E5BB7E3F0BEC9126D28B7AC2DD0F4A
-:1082D000E6FF2817F7AF0570DFDFFD5EE45B357161
-:1082E000BE6FDA7F2FE65535ED9F8D79544D2E39CF
-:1082F0006FE07EC88180F37736043E4892D9C5ABE3
-:10830000BEFFDD096F52784EEEFA655072C48F9849
-:108310009E38DD75D3234F8733EBF70FB85FDFDF70
-:108320002F89FDC207981D4F0EB2B2D1930A82DF8A
-:10833000D4B8DD13A11A84343EBEF3D1EF017FBF60
-:10834000E6C578C3D2C79F7BE5325A5FFA8427AF70
-:10835000962DC3803C604117B8DB0EF9BA820E4BF4
-:10836000FEE5392D7C117B7E776E3F3D963E715840
-:1083700023179D8DBFE95D8735FC4E909B2E5D6F69
-:10838000CE02BB7BD5F7FFA4817CBD7B4822438B0B
-:10839000CEEEDFB0FD39B4EB004F48474EA73EBAF2
-:1083A0009D45AFD4554F57623B13F6B181E8F53D7B
-:1083B000E0997CE4EB1F3E0DE705FFEA8D001E1AF5
-:1083C0007EF8AD20ACE76DB599F1F743ED05708E01
-:1083D000DEE089179858B2E70D0FDF8E7C77CBB1BE
-:1083E000DB0B581E9455C87F17A010E380DBAEC18D
-:1083F000752E2231E4BF868794289C937DA8929A9B
-:1084000027D2C8C7E541A6C7DEDEE1C58FDEBD0DB8
-:108410000A17FCC5979424BB6FCBF2126F17E71EA7
-:10842000F0DD465AFF5067F4CA0FCAE27B56BA83A2
-:108430006F77ADE9063ABD37D21A0AF14A8A873812
-:10844000C79B047A4839367328A31309AB93793F45
-:10845000AA27A7C37368DFEDB17C131CFDF8BEC665
-:10846000E6BF8DCF4FE1F6837DF67601B577D2ACCE
-:108470006F6950C83FB53F6C7C66937326F7BBD6D7
-:10848000323917729F9C5303EFFFED652647D00FDB
-:10849000F6790A576A28BE3F7CB5847AC14B52E907
-:1084A000E47B9787CBB7F33DF5CAD1BE157C42E19B
-:1084B0005761DFEAE71776CE4BE980F6DBA2076962
-:1084C0007FBB7D0EF3623BADFFB96DBFBF85EB8314
-:1084D000CB82AEDFDDD9963FA8EFE4357A928F7E6E
-:1084E0000FE497CA2BEC3F8D8F7B304FE40F7B9FBF
-:1084F0007DE53ACAE77FE81272EBD4A76EB96DD872
-:1085000077094927B77F302224ADDCD2E769E5D669
-:10851000E8417EFE5BE95381BF8541679E93D08F22
-:1085200099F0E8D68F7F0D84D9EF22B8F423FDF7B8
-:1085300032997C361F0AFE137CB7E49F97E1EF83E4
-:10854000F4F1A7E0BF3EFE14FCE75EAF137FEEF749
-:108550001782A122E2C5B4F4DC43E20188A7FE4CF5
-:10856000C178EA290AD36A4AE7537B8BF01E71BBB4
-:108570008FF9E7A7CCDE606E397EFF06EBBDF9DA36
-:108580006AD017E279AF8FC5BF4F457B83F63C9029
-:10859000370F2A4138EFEA49929A74FE08D5C80885
-:1085A000470FC9F49EC58B4F81FD07F3F94725811D
-:1085B0006E331563D44AF0F313ECBE7C7DEBB5410A
-:1085C000C853387570CC46D05F37BFA010FEBB854E
-:1085D0002AE49BDCC4E9FF0E896F9E4AD779D34118
-:1085E000E657D4AF4FCF2F4B78FB45C66D1AE82521
-:1085F000EA17BC658F872FE1BFC7D4B0CDF5FCE08B
-:1086000095C8574B5C7C15E37EE3E382AF269289E5
-:10861000DC6F93EDF96C3395F28D60979C3ACAE26A
-:1086200090A70F2A488FD37B2596FF04F1E029C03D
-:108630000FBD9A3D8FED24F05F9AEF1BF4BD7FF2E2
-:108640003793EFA24D1A9F7A7DC2565A9E7CEAB5A7
-:10865000D29F42FDC7BF1EF53A39BBFDF4437FC62A
-:10866000F3EC5387BC08C7A9433F1F7517D49FF687
-:10867000E2776A4EDDE365F99F8702C9B1F07E2497
-:10868000CB175AF5B33F4D60DF7F6943BABD1A641B
-:10869000FED8E983FFFE5BC81F3E7DD01B86753484
-:1086A0001DCAC2F3ADA6A77D18A739F5B33F4DB6D5
-:1086B000E7337DD6F52CE7DF413C15207590A77C8C
-:1086C0002A879D1B34FD74CA4EB847B46CFF610DF8
-:1086D000CE63A63FF39709A0774EED63F6C4079EDD
-:1086E0009E87E19CF577C11BD77820BE0BFBF53048
-:1086F000425AB29357C48D747861783845F100EBD3
-:10870000A27869007D99091FFFE71F161F7F9C0F44
-:10871000F3371EBC14E5A61F2F92C59E079270B5B5
-:1087200089AE9F3D3FF4A709601FFDA1AB15F7F986
-:1087300081D65D98FDFFDABAA5D460D65DF50FBB92
-:108740006EC6FF87826196F7E79283B3F9FCC7771D
-:1087500060FD878108C23B48F9AFFB875DFFA7A496
-:10876000FB3E4AF7E0C074FF2FD9EC5CF81F6FDDC9
-:1087700003D1FD054EF780097908A77EF6178CAF67
-:108780008BF50FB4EECDFF41D72DECA175722451BE
-:108790005C0479D8A9EEB004BFC3333701612985E1
-:1087A000E75DBBE17A3E9BF9178AC4E23664248B0D
-:1087B0001F11EE6FF4FD5EACC1EE57A9C66AF63D1F
-:1087C000323582DFD55B77C1C208E676908A57637F
-:1087D000501F31157FE7D6ED77B549C492A8FDA7A4
-:1087E0005EF0D5A360FF7BCAE4947702966F42B92E
-:1087F00086C7BD3CA6E6F0370C979FE00B3BDF7BBE
-:10880000F9783AA948C0EF77EB866A26E9FC463545
-:10881000FBFD68C8ED4CD8CE0DBDC4D69F8EB70306
-:108820007E93C5664F9E2FFEFE94CDFC4F45AAE871
-:1088300086BC58325E66DF3527EC5EF1BA1191E4F2
-:108840003AF443997FD98FCFD5DD80479550FF907B
-:10885000AD0FFD4AC2FD49950FA196C996CFD98E9D
-:10886000FB4B03D287D1635423A7CF0A073D04FEF5
-:10887000D3D0C5410F81DFF3A58B9B1E6EBCFF22B9
-:108880009BC5E7DC7472E483E433BF24450DE49FA9
-:10889000EFDD897191F77FF0E655D07EE94F150243
-:1088A000BF8BF6C1DE004981FCAA490DFCAC25FB5B
-:1088B000158C0BFF5F8242FCFF008000000000006F
-:1088C0001F8B080000000000000BED7D7B7C54D561
-:1088D000B5F03E73CE4C6692493249662633793103
-:1088E00049208246980408A82813020842AF038A48
-:1088F000606FD49167304F90B6B4D51F0389313C77
-:108900006C83220F4B7540545AA90D182928DA415F
-:108910001E62AD5FA3D25B6CB137E203150829ADCF
-:10892000FDE8BDF672D75A7BEFCC399389686F7F2B
-:10893000F7FBE7CB3F27FB9C7DF65E7BBDD7DAEBF1
-:10894000ECB97409FEC63376495C196B66CCC55820
-:10895000EDCF5319733276CF9EA4C8F442B8EEFD22
-:108960006038BB9AB19E55BD4773E17EF8A78AFF78
-:1089700029EC1EEE1E7E0BDCBF476377054B63E3DD
-:10898000C86BA6C3C4D868C6CEEE4F9913B133A640
-:10899000EC3C78278DDB31DB9CA4C4FAD91C669AA9
-:1089A00017FA05F079F8274A6488D27F3CC656F258
-:1089B000F17EA270F8F6992336846FE7364B08E013
-:1089C00068DCF9274B00E0A8FAF9CFD2BA61BEC63D
-:1089D0007D2A8B0E65F47789E173359A349CAEEF6E
-:1089E000E395B1805DA960AC01FFF5C1B5B37E3AF6
-:1089F0004B836BC7DA3FA969F8BEF954B735F67EE9
-:108A0000EDCF5FDE1B06D4D43EFF4C9A0FAE9F75B0
-:108A10003D95C64A69BCBB2DE98C6976CDD01FC790
-:108A2000BD98D97F1C98973137DCE7B75863C76A80
-:108A30003E5FE7374E33848FC138126E58DF67F8D8
-:108A40008F97B1B18E54E7C757C1FF63D8984B2AAF
-:108A50005C776631764D7F3CC5F015E6F4FCD9E7CE
-:108A60008F87013F67F79C791CE1AFFBAF3F3FFE6B
-:108A70007DC01F7BC5E6780AD6DDF8D3DFA6217D51
-:108A8000E57B331D0ABDD793CFC25EE8D7F36E52A4
-:108A9000240CB77A5E3E5DE083F5F6ECFE9BDB07C7
-:108AA000FD97BD3C291BD7BFEC85AA6C661F188EAD
-:108AB0009E158C4592F47045888EBE7D30683634A4
-:108AC0000F886B1C3D0E751E2A4038CF9D48F2273B
-:108AD000219EE0DEF272A40FD069386FDF07F86DD7
-:108AE000D8F5E09FD4E189F01CCE357990AE1F4CCB
-:108AF0004638198BE6320FE2B7B7D561EFDFBF8F8B
-:108B00005EC7819E23BE02DD76ADE6F37600DDD240
-:108B1000FAD3ED1CFE03F46944BAA5C4E8F6390B98
-:108B20003DE12D86766716D13511BEA25F015F3516
-:108B30000A1FFF7A47E07B0E949F3D297DF49A8EB1
-:108B4000F4FAD9E7050CE8FD89B9F74E368AB1DEAB
-:108B500097931CDBE1FE3D2FFF8EE4A4E785B72C45
-:108B60004847F8B32BB0AE1ED6F7D785EB6C50C490
-:108B70003A77A44693D262786F88CC98E24BA3FBF5
-:108B8000EFD3FD08E75FC45F2ED22772F0562501B0
-:108B90003D3A1C45B40E1671D1BAEB77FCC1827C0C
-:108BA00023E984F451C622BDDE9F8CF7259DE4BAEB
-:108BB000E3C773201EC6E8E8B683CB617FBAF65AD6
-:108BC0005871227A01BCF81EC20BED9E6D499A9233
-:108BD000CEEFE7C13A7ACC6C4E07C211517E97882E
-:108BE000BE8CADA2F53C1B2F97627D9793CBCBC17A
-:108BF000FD8FE2E5C70E078D2FF173F68BC4FAF9EE
-:108C000028CA39C0BFCF1E3A82FCC39835F2218CE6
-:108C1000731753587A710C6F12DEB31A23BD7BF6AB
-:108C2000A76A240CEB6FED38447A365EBE615D8135
-:108C30008E04F3FD4ECCD7B0EFE070D443675FDD18
-:108C40004FFCD7B0EB7D4B18C639BAF3794B776937
-:108C50008CDF517F4774FAFBEC73078793BEC5F135
-:108C600013E89B0FC5F88D078CE337EEFA9361FC90
-:108C7000DA7087C561BFFC3C9F6981D9B8DECFBA85
-:108C8000CC0CF5DF671DEA944882795F17F64BE25A
-:108C9000A9F52D0BD9B1516F274792004FCBDE9A22
-:108CA000F28774275E2D3E402DEB5CC9F9AAF3FED6
-:108CB000402ED2A5F3AD6FAA684FF6221EAF888D65
-:108CC0005B71BCA92A15E4B6E2647014B255BC3ECF
-:108CD0001873C264801BE6C946FDDC02E3F8601C21
-:108CE000A6F93D4118574D9B3C05E1511D26872DA6
-:108CF000A15DE5E399ED411602B8CC60B77D3A7EFF
-:108D0000F2CC4C1BCED271795E13EA85A5C05EA869
-:108D10009F3D16365403F89829D9FF148CBB74581C
-:108D2000A0EC08B4972EF0F8C3F0DC7B0B7FEF9C2F
-:108D3000C31E368DC0764104E528E5A2CA7CA0FAA0
-:108D4000CE2ABF5EC84025A408BECAED48213B9389
-:108D5000A2F93655433BA546F30346D947F6507E64
-:108D6000860BDFB3D07BDE0C45FB18D79DC6D250F7
-:108D7000DEE4F8B29F1C9769D1E1B87E66651A03FC
-:108D8000BB92C738DCAA584F31EB5290BF9B67A407
-:108D90006DC7F6D6D41AB2FF05ACF76000E8F664EA
-:108DA000DAE463A8C7E05F13F6CB6F32DAF741CBA2
-:108DB0008DEDC2B01627BF3E5310F8AFB8CD78DFA7
-:108DC0005955B964901FE46C7DE7140DF4B77376C0
-:108DD000E5EE5CC0E9B4356FF3F63395655E681F68
-:108DE0005F5F3755033DE2FC4D655901B4CF3FFC51
-:108DF0009DA9F4BC1690742DA8FEF5574F0D97C68B
-:108E0000E4D60560A6AB24CF37201ECE05CFB6E250
-:108E1000D3FA597FB5C023FC0B221EF2C7723CE483
-:108E2000D94FEE66D07F90A97B25F2E5132FFFDFA7
-:108E30000CECE7630E5AAF83B5383EB6E2E2D9D800
-:108E40004B23BF4C9F69EC63C9876A4C0E5477E88B
-:108E5000E60CE0ABD6B943374D465D5BE727FE82B3
-:108E6000991D640F657F8793E8335FD007E1B402F3
-:108E70009F2DE05DD822356C61346EBB2548F66AC3
-:108E8000A203E753C275EAA5ABBE3E5CF3907F90A8
-:108E90001EA92C15EF6B753E82EFB02BB090F0E65B
-:108EA0000AD155DEF7CC9DE30B019E6FC808D6E0D2
-:108EB0007ABC0B2F16E03AA667301AAF6A913D8054
-:108EC000F6F5C201508309E44B5EB7AF607E6DC812
-:108ED000C0CF8399A16FE3BC45BFF4ED3906E38DA4
-:108EE000986FF1DB608A11CB47F9B52CC61784FE69
-:108EF00087A09F07698AF2F76D1641F93B9FA4048A
-:108F000002D03E7FAF83F473DEFCE9C7D0AE9D4F45
-:108F100029EC88E2FDEFFB482EC11350502EF20FD2
-:108F2000A4476D69C4D77F8DE3EBBF1AF9D838EF3A
-:108F3000F94BBE7DDD349E438C078E113CCF17F478
-:108F40003AAF72FFFCFC0A1FC1016EE441B4BB5F83
-:108F500075BE4733843D15F4B9DF16D8887801FC17
-:108F60006FD6E37FEBC0747C42D0F18944745C68B7
-:108F70006D2A40FD704FB06332686E362323B40310
-:108F8000C73DBDF068AB19D6535FDD54824CDF9FFF
-:108F9000BE0AE973F781BB579AA1DD88F4F1F5A702
-:108FA000E388E565442F1D5D3B108E1107FE64428A
-:108FB000B8253D3729DC0EC4BFFF528622E6AD5BE3
-:108FC00069063C5ED86721FF37BEDF910C1FF59321
-:108FD000EDE1D60ABF06729A6D62A144E31EE9373D
-:108FE000AED59F9400FEBEF11C7C3CC0FB6B7ABCEE
-:108FF000BF21F56F7FBCFF1FEC0778A7EB57C0FBC5
-:109000003B5F8677E96FD70ABD50CBD6919FF95168
-:1090100060A67B30CC3B59B513FF2F7E4A25B98320
-:10902000FED3BDEE981E597C4DD3415CE7E21F2B69
-:10903000C4A7F3435CBF9F5938FD28EAF505ED4608
-:10904000BF69E11CD03300DFA2CDC6FB8B23717159
-:1090500020D3E973E08733317E1DC4F58C87ECA4FF
-:109060002AE4A16A51693AFA49AF987DBF213FFCD1
-:1090700075956D4F80F7FCCC42B2C37DED264086DE
-:10908000CEBEB3F93613EA4939EEC445A5D9E8CFC7
-:109090002C4DF57D69FC3568B9D19E178693994FA3
-:1090A000376E715BA6A13DA43DC7D0FF8ACD458632
-:1090B000E7C322571A9E5FB5B3DCD0BEBAE35A436A
-:1090C000FF11FB2618DA65D19B0CFD471E9B6968D2
-:1090D0008FEEFAA6A1FF9813730DCFAFE9BEC7F0CC
-:1090E000FCBA4F961ADAD7F77ECFE8BF9818E94551
-:1090F00096AC909E3CBCE2938A0F910147291311D4
-:109100009F556379DFC34B2C26471A5E4B4C0EE00C
-:109110008F57174C27FB7F78893BE0A36B4500E313
-:109120001EA68E1B154AE0DF4E727C5AF1A16EDE40
-:109130002AABD9A0D726398CEDF24C11170EE27C60
-:109140003326D328576AD3F4A8059A398B0767E3E7
-:109150007C205FD76672BD46D7AF205FE3B1DFE901
-:10916000B4682BB6A57C31615F2B051FC135602922
-:1091700047864A253B1CC09B3EBA1FD6203E9960BD
-:10918000F5E71DC1F598FC4E64BE89738287CD9CBE
-:1091900003B91D66434D5FC70E4BF9F6987C61B26B
-:1091A0005F998CF2495B1694A4331D5EE764F2FC70
-:1091B00011D87D7E75EC1CA949FC15E9EF4F19AD5E
-:1091C0000D8DDD57164DCF4679F30CA0072D9EE28D
-:1091D000613B40FF5ABC857495F75BE798A6441243
-:1091E000D0B536531170703F6B58CCCFAA257A7822
-:1091F000DEDE3804F0D550DD4B7E96C7D4BEE428C1
-:10920000AEEB572ACF93812785FA6081F09B174CEC
-:109210007D78C951D04B0BDE1C427A49CEB37545DF
-:109220007498DE3FC81B208E7A3A93EBF1C757043F
-:1092300086CD1F4270915E907E7941B87E32C637EE
-:10924000835813C5891B4DAC26D1380F8A71B29152
-:10925000E408AFC34EF2716EE1C9340DD6919C1A89
-:109260007A10D737774457058F0303FE99E07F15AF
-:1092700044EFD888FD0B3C1A8B28FDE7CFAE0EB526
-:1092800015C2FA5A324D7E3BB57B15EC9F741F63B5
-:1092900059D0BFE5BF5482A7E5D56B18C66749F61C
-:1092A00026867EAC5CD7A1CCC7083F6A670AD93D49
-:1092B000862E28E0EF5B82F69F7BE677A17FF1F9AF
-:1092C0000633CDF739ACD101E37FDEA946D0593F53
-:1092D0009A991C35415B6D4B257B5D803E27F45F81
-:1092E000D8991AF115C6F0A26D1EC7A260DF92F2DE
-:1092F000F8FA5B32ED117B21ADFB8799A36370CA4D
-:1093000075E70F1077BE22E06681A1063A7B210641
-:10931000EBC2B93570F6611C758399E2C205197606
-:109320008233B2223C6CBEB9FFFA5A3D336FBE1D88
-:10933000E0693EAE3215C6F175B7133E16023E2205
-:10934000BEFEF83EE72BFCAB4925B85F417AA99BEE
-:1093500027D3BA18FAF1F05EFD130A7BAC10F9328C
-:109360003485E89C63624F1526F00F50DE5C883F21
-:109370009E3FB0784AB89C78060FDB01E3FD2A7364
-:10938000407FEBCD4C6EF7E91AAF97C0FE85118E8A
-:109390000B9B15A2E76925623103CA6A6F8D1AEC2F
-:1093A000BE1A50C9DF88870BF4D8894C9D9FA3A6AD
-:1093B000DF371CC71DD83FDB7DD082FE9983917FAC
-:1093C00026F5E740FE19FA65C87FD22FFB384E0F0D
-:1093D000C3FA3E15EBFB34D1FA12E8DD1ED2BBDF37
-:1093E0008C26F46B5C96C47A29378BEBBB46878559
-:1093F000511E6A80BCBA2B4BFA71DCAF1848CF5DA6
-:109400002EDE285A5B4AFAF642972F3D13AECE0F56
-:1094100094A644E3A8CB9F1D8974596CAB4CCA0237
-:10942000F8EC5946FC6C59DDCF4EA567717CD1B57F
-:109430001FBEEC802F93015FCEAC2FF503B9DECDBC
-:10944000C1BC14CCD723F003FAF722E9DF5B7A6EB4
-:10945000C358B1FE962F449CCBFBBB859E8638F843
-:10946000868F7CD4FFCF48BF583CDC5D817150F3C0
-:109470000B57A4A31F3571EFED0EBC5E700E26BC1A
-:109480009CDB9B14C079CE6582FEB4637BCC51CC4F
-:10949000139C59712C538FD773CFBD55618671CEF4
-:1094A000ED79AB42C37C83C8A7C8E7F597DEA9086E
-:1094B000C2FBE1096C68935D475F2BD7EF1B6C3CE7
-:1094C0001FE1725B5AD908F06B5D19F4FEA36ED3ED
-:1094D0000FF0BE6A7DA7E04394E7B8FCCB06B3AFBC
-:1094E000D90E7C0E31961FF3F84B8705BC0B30FF6D
-:1094F00032C34379936685EBBDF0021E1F3A8BD8C9
-:10950000D04218CF6C52557CAFD7CBFCDBA14BD2ED
-:10951000E1F628AAA9E4AE8E00823F2A3993F07EB4
-:10952000DD598782FEBECCD768557CBCDE5996C813
-:10953000765D9EC63347233B96A27530D4ABB35CB1
-:10954000FC7D99AFA99A39275889703D60A27803AC
-:1095500014A582FA2B57ACA3D0BB67B5F4453437BA
-:10956000B215C3E40C5B0BFC3B18F09CE6330530F2
-:109570003F9A96173D61063F2CB785B1533A7F2F2E
-:1095800005990FD7F3A61AD90EF29FFAC578EB1CEE
-:10959000F0675292B9FCA4055B9760DE1AEFFF6B8F
-:1095A00039D285BF4FF451318DC4C2E90072EA58F7
-:1095B000E3B8927E9D2BACFEC1C0A87B5638E8FA7A
-:1095C000F40A0FC1F5F00A1F5D7FB86228DD1F485D
-:1095D000CE2E777D6805CCABE327E718C00AACD761
-:1095E000A93292C7874657A4CF4DA007E4F5B1151D
-:1095F000C7DC13870804023D72EA1CDBD614129DF7
-:1096000051686075AFAD0E8C63EC0173600903D6D1
-:109610007A20EB8B8998575AAB98288FD49A75701B
-:1096200075380FAF3E4EB743EF32CC477A47B52B74
-:1096300028AFDEBA76E283515D5D2C24EE07A0ED03
-:109640003DCEEF3F60E3785EC7D81484D7AEB0203C
-:109650005E7B6CDC9E7C6CE37AED53712DCC0A3D15
-:109660009C05F7FFE23851F20080672BFD7D01EE8B
-:1096700047A41CFA1BE56BD5E1162BCA87F7C0FB84
-:10968000B44FA19ABA2D0C4CE8F38FBC4BF92FD5EF
-:10969000122CE4ED9FAFC175B8D282DBD0C562E178
-:1096A00077A71EF680DC203F5C4BD808A31CAFB523
-:1096B0008976F8DF080F6BCDBCFDFC23BF5D1DA6CE
-:1096C000767031E205DB2D88978C0E8F09DAF695DE
-:1096D000EFAC3E763DB665FF77A8FF7359DC3E32AE
-:1096E0007BD08BFAA3AFED80F6D5BAB6C6DBCCCA79
-:1096F000AF727DF587FE763417F8B5E180D281A090
-:10970000790FAC57709DDE7DEB09DFF407F281CB5A
-:10971000A03CA6354C79AFA7571C73B4009DB5CCBF
-:109720003637E2FD0A4F281048A0AF7FEE92FE2A9E
-:10973000F4D7E7BF22E6DE6E9DFFEC655C6E580B4A
-:10974000E88704FE4091ABF23D27AC6383125AA335
-:10975000A29EF999D9817A8475713D74568CC5227F
-:1097600039E48FD4D978D3BC2AB46618EA893B345B
-:109770003FC6B9B585ED95688F6BF717FA57B218E4
-:10978000BFD46674B8CB917F328CED669117C9CE89
-:1097900068CAC828C5FD82F50598CF6F60ED777E51
-:1097A0000FE1FDB5CAD0AFFEF4E035E9D741BB1EED
-:1097B000DA68E7EB3BDFB2207F3EE8E4FAB3A113BF
-:1097C000F807C65907F21500C7639BE64846FDF443
-:1097D00074A0E94A74C97A1FF9CB541B3875CF14A9
-:1097E000051C446FE7A5D5566C5B1CC35819B62DF4
-:1097F0006B90DF6ACB4C5C8E98E557014DEC4F4285
-:10980000FBB78F54DD14B6C7EC8D57D8A7C6ADF69D
-:10981000B089DBA7F368D71A369BC2A8BF4CD62EF7
-:109820000BD2D78E7BAF441F07E16D99D4E771FA55
-:109830007AD9D4CC9BB0BDEC812247F84BF28A3563
-:1098400017535844E7CF3CE8E4725CA385699FA3B3
-:10985000E6621A3DFFE7CD676391915F369F9D9E5B
-:10986000CBF9EA62F3115D0F95FF6AE360A0DBB20A
-:10987000DD6653928EEF96ED16FBC9B640368EE349
-:10988000B2308177F0CF01BF5A615F3BAC819C3F22
-:10989000D427E7DE3513C721DD62CFD958831E08F0
-:1098A000607CF850B2D4038589FB27C7F52F92ED71
-:1098B0002BA97F3C3CAEE458DB0AFDB5BF27F5B5CC
-:1098C00011BEF5A6B8F132E5FCE56B26E6C5F8EA6F
-:1098D000B759D7FD2A3C189E67B457627D45EF0201
-:1098E000E643BB8CFCEAD7E9FDDF0ABFAFE662B115
-:1098F00081DE31BC9718EE9F5EE131ECCB2DAA5E84
-:1099000046FB87BF157ABE8685290EAAD99ACB2237
-:10991000BABCC4FF87E31F85E3BA01E0B8E17F1951
-:109920008E42837CC6E0186CB8FF8FC2B1FDB69240
-:109930009B0AA1CBA34AD85A8476E17E13E539D499
-:109940008C89BE95B82F70BF467E1EBA24589F5191
-:10995000A4B1635A39CA4F7B00E372B68AE77BE051
-:109960007E9BB99CEC10F9C1C50792EE463FADA8AD
-:1099700026B018AF2CAF94F61DE4BE1D13792BB999
-:10998000CF30C4C12A3570DE46B8EE263B5514AC44
-:10999000AE45674E4D1D958CF6F15153248CF385E1
-:1099A0001FE6F3B94C910E2BEADEB4C10EB477AECC
-:1099B00034AEFFD89A52B27FDB4D45572E01381E88
-:1099C000502A935F473C6714519E16EF2F85FBDBAF
-:1099D00085DD5233FC0EB453DB85DD6A16FA5DDE9D
-:1099E0004FC90CDE8DFEC44967C34DD66B500F05C1
-:1099F000DAB2C0DEFCC1D9B0C6730DDA1B5F9115B7
-:109A0000ECCB1F36D4AF417BB37DA52FC791116B33
-:109A10000FF93B586BD213F56BD05F69B12FBD07BF
-:109A2000FD1D78FE2B2BACF3994CA177C4F3A23E1D
-:109A30003D057A09F498BAB2AF1D46BD54D4A77754
-:109A4000EA49EFEC785CA5F641980FFD3E5847587F
-:109A5000C5F50ED1C8AFB7012CC9D0B60D2BA2FDEC
-:109A60001B58374B46FF7A187F2EF3EE962126CAF5
-:109A7000BB637FC4A3CDCBFB5B66303FEE3759524F
-:109A8000ED1487C83CBE2AF68F92451D85E298C129
-:109A90002EC1FBD675E54B311EB30E36EE935AE25E
-:109AA000EA2DD4F8FA0B7B94FCAFF79C22FF9EC5FD
-:109AB0003C978A63F719F397E3D57D7B4B25C2BBAF
-:109AC00034953954CC8384A2B40F196FD7AC604756
-:109AD0007D3AF9B0DA5920D17EFF8B2EEED7DA2FFE
-:109AE0006A14DF6C50C0BF413B9ACAF94CFA476612
-:109AF00087E45BA3DD95FE923983AF65D9D409D99C
-:109B0000187FABF68015FD9C838E728AEB55E6BFFD
-:109B1000B952E7EFB444A752BE4C7304C80FCFC686
-:109B20003811F33D0E3FD3FB39AD2B20B0BC82B1D1
-:109B3000272B4A26A03C3C668B5A8B91BE8F9A28D5
-:109B4000DE3B547E4F58C17CD9724672FA64857BE5
-:109B500002E6BBB769C1F43B505E8EC37C3E4E3714
-:109B6000BECFDAAC607EF7736B301DF5C143C8F72A
-:109B70003ABC3CE9E27EFD0527F73B1F3073B9682C
-:109B80000578A2008776F12ACA473DE0E2FAC95279
-:109B90003D91F23516C007E6E3925853D841EBE504
-:109BA000F9B5248FC950B7A75D1C4EEF5F709A0CB2
-:109BB00071751BACD3A7D35F3616A6FC1AE2F8A9C1
-:109BC00004FECB4141372BF8433EF24FE2F6A1FBB6
-:109BD000FB47E4AF48FAF4F9290AF8275F128F35FA
-:109BE00042BCACD7F78D5A2FE9DF468887F17E8FCC
-:109BF000C34AFEA1AC4BB00B7DD6EA09B55F877CAA
-:109C00009E9C361CF3001AEB20A4ACC3BA04D48784
-:109C10001EADB78FFF41E69B6D69DBB15F8BA8532B
-:109C200048F11BE52799B54703289F437572C31078
-:109C3000DF611A37C967BCCF5888619CA179E2EB14
-:109C400018C27DF54A546FA7B12DB8AF2CFDDE5C6C
-:109C5000512F742EE58F1528C7E0F78ECEA2BC4D8C
-:109C60002FC52D325FF375FDE46C1C03E3D1E57F56
-:109C7000AEF810E56CC6E442BC9FA2713E01575C91
-:109C80004B2AC7F06AF2E20C58FF37B238FF39D5D9
-:109C900076AAEB785ED8B1BF38E678298E027C527E
-:109CA0003D4CB2BF9BE245E1A7A97DFAF1DDD501AC
-:109CB000A3DF19D6FB792B1E7D77754B29C52BD4D5
-:109CC0007EFE9117D7603CF8804DB65FA036D8B9BC
-:109CD00028C64B6C6F920FF910DE0FA0BCB1DB4AA7
-:109CE000C8CF568B580EE263629A95F4A6BA3769CC
-:109CF0003BFAC110173F97A5CB739E4B3D5180FE99
-:109D00007082F1C286F10ABEDE78307F27D6CBC8DA
-:109D1000E713D3364755FE9E0FDF63795D7F0CC393
-:109D2000F88FBE90C4D6000A1F331BE55D5E378AEC
-:109D30003813F58DBE5ED1523D3F804C2DE53AC9BA
-:109D400093CCA23A7E9272AE5D1CC6A23A39C97615
-:109D50001512BD342D407924ED62293DBFE0E47C2D
-:109D6000D0BAC27199793207986724E98F81E7A93F
-:109D700010FA85897CA346752F522F0C24E7F1FB3E
-:109D80005AF17A515EA55E4CC1B1E1FA82CB984797
-:109D9000BF6773C75164A1CFECA17DAED158BF742A
-:109DA000320D4D789D293A1CF9F8A3FEF71B70710E
-:109DB00051CC33C0FD929D4B5E45763DEC0A7D8AC9
-:109DC0007ED02B2E919FF5803D54D1DE81BD28E5BC
-:109DD000F96B27E66343BE4D9318CAD36D948F5534
-:109DE000DD419F0BF13BB382720E12EEB52B781D55
-:109DF00099D4B3762D44F8B26A617E7584C08633F7
-:109E0000F6B1EBD24D189B691A97A35F3F7A96FC87
-:109E10000A9B1620BEB2394C3EF40B6C1017A2DE22
-:109E20005DE930F1FD168F95F2F5AD0A4488A03753
-:109E30009666147DE93EB6E5A29BEC2D40E2D1EB9F
-:109E4000ED7FFE3C4E611F8CF3680EEE37B043DCB5
-:109E50000E23123ED0E963E90FC4BF173FBEC4A76B
-:109E6000C4AF15F15A4AF630A1BFF1776137A5FEAC
-:109E7000CC96FAD675A2240A77EB95EE34F46B40B3
-:109E80008FFE1DF9A4E1EADE34938FF4AF9BFB4112
-:109E900061F13EB3EBF95AE6A9E5BA24FC4B5F5FEA
-:109EA00060D5EF97C4C31B6F67EDA5C6FA029BCFC1
-:109EB000585F20EBF6552D487C631E17B0A29CAC72
-:109EC00074943BD0CF69D17CBF0B505D8499FC6DFD
-:109ED000F0DF0DF3CBEB4320FF08C710B7C950F7F5
-:109EE00022AFA9B80F92E0BD496E8EBF870EDE4E3D
-:109EF0007A58F3F37DA178FA31D64EFC925AC21CFF
-:109F0000943F15F0A65D66DC81F8E807076DE4274D
-:109F10006B63AD11ACBB8C9F4F3507030AEADD3292
-:109F2000467EB29ACFE7578730AAD34E1B95C98693
-:109F3000EAF0D8EA9949CF97BA1C0CE9ADA69A8203
-:109F400089F845E2C9E33619F6AD3D926FBCBFA76B
-:109F5000FD151DDF4C74BBFAF38DC7CDF521C2A1F1
-:109F6000A76FABA7283B117D627A91F3D5E5F8A2E4
-:109F7000621CF03BDA79B86E8375746A6CCAEE5273
-:109F8000848B515D7BDD6C3B73805DBBC353799BE0
-:109F90001BC6ABE87A95D78B77BA2868AC13EFC7A6
-:109FA000CFFFB69BEBDBB7DD5C3FA69F083C3B1EBB
-:109FB000F0DCD995EC53E0516766623DFD03B76272
-:109FC000AC37D0BA87A3FF22FB57541BE70B0BFA21
-:109FD000DF2FDF0BDF9C89FEDC74C665A3D8AFF0F2
-:109FE000FA867D29912168575954BB05F0BA53C4AC
-:109FF0008D3B219E9C01E3BA935908D7EDCA827626
-:10A0000029BD1FD86D8F8DF76B8E3236A938B803F6
-:10A01000C79B94ED2D6B2EE4EFE3384792598BB537
-:10A020003C86F79B9380E532F17938674969ECFE0D
-:10A030001150EED8CFEDEE1EAE80FCCF3705DC68B8
-:10A04000473E7CEB7B5427BA88059EFC10E87335AD
-:10A05000DCC4F8AAE244D0827AE1537C08F87EDCC2
-:10A060001E5C8D7CB2A07DEA93FA3A17B6837F8797
-:10A0700022F1D59F1FB8FE0138C3D64C039C6C2C2F
-:10A08000C26DE5EFC5E3575EEF127C2CE909E8B934
-:10A090002A55D0730DA07E6E0AF7973B2D9C4E7DFE
-:10A0A000FCE3B2B4E23ECA592B7FCE0243B97F6FC4
-:10A0B000E5F4999B521041BFBA530BA4A07F3FB760
-:10A0C0006FBF3E40DFF5D4D902E9D720FDDEE2F1D3
-:10A0D000D7E94A7B9B02E39C3607D2516E4FBFA55E
-:10A0E0002A2BA9FE81D747CABAB3D366DFDA2BE1A0
-:10A0F000F9BC1FA98195F4D818579C6581916F62AE
-:10A100009CB54FA57DBBC287EF56AF86FEF321E01D
-:10A1100040BD34B7CA1E467FAEF3F74D7F44BB3611
-:10A12000EFF124DF2A98E7F0E6917FC5F6C7EB52FE
-:10A130007D4994AF2D52BC98475D5FE8A0FDB7E51F
-:10A140004CF8ADF74EAB1ACCD84FF15FB90F026B9C
-:10A15000FE98C9E74FAC9D08EBBCD2D569B2034C61
-:10A1600037643FB1D60AF47E6065D0837988731B6B
-:10A17000BFB516F3106E77A06BBC1FE0DBF49D69D2
-:10A18000D8EE7C4C8C175EBE16F30E2F9942850AD2
-:10A190003C9FB269FD34AA532E96E33FB53600F6D4
-:10A1A0007FEE1357FCF5048CDF90FD8B69E81F00F0
-:10A1B0007D053C0708BE05E364FB604A15F80ECE3A
-:10A1C0001466C8C79A63790DCAF7764A3F9D1D99F0
-:10A1D00086F9D879139AAA34187F53F61B6B4B87EC
-:10A1E0003136A6BDD21180F6D6EC37A7A5009F74F4
-:10A1F000B2402DE64D22D9BF9966BD1EC6CF328E24
-:10A20000EF54455E3FFCCE5A1CAFA23A5086FE4C3E
-:10A21000A9E7C3B55678DF8575AC30DF6D9B87AD98
-:10A2200043BF5EEAD17F117A14F4E61994877A6B02
-:10A23000F7514CF5162CEFB5F0FA66A13FF2385FF6
-:10A24000F7B58776F37A74D9F6F076E7AAC4FAE818
-:10A250002F1ECEF79DC9899FE76673FD23E526FD76
-:10A26000040BEC4A203FA66CFBFF48FEBCD9FF8FD5
-:10A27000F45BC665F45B86D46F029FA5467D0DD363
-:10A2800008BD7F6511EA89636E9FC15E5774CD2456
-:10A290007BF2AE47E8151F7FDF55C5EB817AF7A744
-:10A2A00050BE8B59BB4A904EF2BDD102EF550F4EB6
-:10A2B000DF84FDEABACC8CBEF3D85DF9A57E651DBE
-:10A2C000E6877571489D16A5BC401DE68747E27874
-:10A2D000BFB6A03F84E3E0771CB80F82F95D5773E7
-:10A2E00062FA4BBFAAEE62060B8FEC6F7F63E33B13
-:10A2F000E9F9E5D6151BCF98BFE83F9E45EC27C589
-:10A30000D9494B6238AB259F02BE4D3AFE5A20F820
-:10A310000DB427F9933D7B876D5F53A89F977F5FAF
-:10A3200005FAF9D9F1A82F41DFA3BF59A105A6610C
-:10A33000FF8AAE4CDAA792FC21F942D2B533B38939
-:10A34000F27EBD5B14F2A7E2E19A27E1DAAC703F3E
-:10A35000A43AA4DEAD834FCA038CDF29C61F35960D
-:10A36000E4E7C7DC9F06B9B903E517F7BD711DFE29
-:10A37000EEE133AFEE0FFFAF851F0574E4F87FC148
-:10A3800046750AF1F63286FFDCCBD0B3809E4B7F58
-:10A39000A86E40BB9946EF659F88A6F9A05F97E03D
-:10A3A000FFCE8E0FD2AE43B9D8A732C5C7D78D7AAC
-:10A3B000AB42EAE3F088372668E497C5EC878FFC68
-:10A3C00033A93FA3566BAC7F70E388692DA8BF9378
-:10A3D000B8BC3A55B036E531381ECEE67A6C6C28FA
-:10A3E000717CF303772A3D97F8DEB2BC8A7D00EBDF
-:10A3F0003B21ECFDD8EEB082745920F0D8E7CF08AD
-:10A400007D767352F773E2FB10033FCA36F83B0DBB
-:10A41000A662DD733BD7BB723E80B78561C90A5C1B
-:10A4200015B8DEE62914E370BE3CB5377B1BEA0F96
-:10A430006771A00CF58DE42FB02762BDA6BB66DA6C
-:10A4400039FFCF4C4087E785FE5CB099AFBFF33F43
-:10A45000AAA6211F74BE9D99B14AC7EFA7841F29E0
-:10A46000C795F224DF93CFF78BF15EC94E237C9C16
-:10A4700012F8433812D58BC9F770BDA4AFDBB8BE54
-:10A48000867587914EB0EEB0528EEB560C76A2CF09
-:10A490003E087CD75B00CF80C79DE6700ED631B9F1
-:10A4A000703EFBE5E517D643CF7BF7A792DE891F09
-:10A4B000FF5C368FE7B699789DD51113C833CA99DA
-:10A4C0009DC3DBB3D74BE3760B3EBABC3EFC6AF2CE
-:10A4D000B3CDC2EB62017EAA4FAC7F31779B11FEF8
-:10A4E0009502FE50337E87E7DCC4FCCD8CF0164528
-:10A4F0007CDDEBF171FD640991FFD6BB8551FC3A1F
-:10A5000004FC081FB41B83F672A53026A7251D0A7C
-:10A51000D1B16203D869C49B55E2EDF55DFA793F8C
-:10A52000CF4E357C4F5827E83F04ECFBB300EF10CB
-:10A5300018E739829BC3756A63C77598A7EBB3F7B1
-:10A540009E34C10FF170462DB91C4EAACB407FC777
-:10A55000372A06278E8FF3307B70158EDBF0CE9E68
-:10A560005CFDB8E91ECE6F4E75EE041BEAB1F5A096
-:10A5700057491D840EE17716F30F6438D6308A1BD5
-:10A580004C181FCA79E78B7C2DC865C50C585A49F1
-:10A59000DF3CA03F75FAAFC863E7FDAD5501AA7770
-:10A5A000D3B87D72B59FBE1FF73106B2ABFF2C7ECC
-:10A5B000003AD2BA7B77C3BA7C31FC7576DCBDCA6F
-:10A5C00086FAF204F3A3BE94EB1A52DD9D86753C25
-:10A5D0008D428F025E4CC807CE1FF958B34FA79F1C
-:10A5E00005FD86322E6F323E198A1B2CD0BED63323
-:10A5F0005CEA1BCA179C7AF1E567D7505CC1E9D5C4
-:10A6000058CDE92BE5F50E4FE85E0FCAC1ECFB68AB
-:10A610007F07FA55A0BEABDBC0E7817E1D8CE4B698
-:10A62000ABA01AF0F72F9ED4847473063B6CF4BE73
-:10A63000E0FF73FBAF8E201FBA6EEDADC2FBC00F03
-:10A64000044F67476A04E366F297F1FD97156EBF02
-:10A650005888F032BFDAE1D7F38984AF8FEE0CE887
-:10A660007E75ECFE906A3E6EE33E18978F43F25380
-:10A670007717A37CB3A40F801CC6FCBED43B2EFC72
-:10A680002C3E338647893FF97E03BECF78DE00E358
-:10A69000BD46D64DF9D33A359887F11ACB4EA2EF85
-:10A6A00054210E26FD73C4C6341BBCFF1A5CD1BEF8
-:10A6B0004F5297D0F742938A159273D010326F168B
-:10A6C000453FF2E6F129A41FD817F70EC6F5B85298
-:10A6D00038DFC13856318E95FC54A10F7F5300FAF4
-:10A6E0005089E9F1238A42E31CB9FEAAED549B2963
-:10A6F000D689E3A1DF7044999147FEACC86F00DEB4
-:10A7000086EBFDB318FF86055CDD05F85C1F27614D
-:10A710005CD3176785C7AFBB11E2AC31533AA226B1
-:10A72000074AC384E9DF817927419C6583F5DF8F80
-:10A730007C8CFABE30ACA6215C4360DD70EB6872A5
-:10A74000A8B4C91E9BC72DF25F6E51B78CFE3C5E4C
-:10A75000CD5E6E57D67BB9DDE81657703B12E6CB5F
-:10A76000FE533CFF773BD7E36B2A13D7376FF118C3
-:10A77000F39D378BFD2288B7B620FF40BC25EA77D2
-:10A78000F9FE12F8B584DFAA07AB69DFF4F3AE591E
-:10A79000E9FCBC072EFF0B44FDEC5DF7CFFA21F27C
-:10A7A000DD8758570F74FC48ECEF7DE808A4619DE5
-:10A7B000597D72E23AEA5F7AF83AEB051E4EAFE055
-:10A7C000E7332CC07D4DF083777BB8FD5AD47ECB28
-:10A7D00064A4FB2288E3715F53D64F483AD76C5587
-:10A7E0000DFB130B705F33EB1F8923CA06882346CA
-:10A7F00019E208396F7C3C716A85C7B08F32B7BDEA
-:10A80000589C8FC1FBCF637E827B5E5BAE611F96DF
-:10A81000B5B9BED2B906183F8413C26731DC3FB563
-:10A82000C20A02AE83E393C1547FB2C513FA9DC737
-:10A8300000470A0B1BF2C9E31CB4DF6FE3796CA07D
-:10A840007F58EF57C7C375C6F38FC66BC503E0B912
-:10A85000E47F255EAB18C7F51A6B57A89666CCC483
-:10A8600038FF59D8CB4B9E14431E607EB5B19FEA8A
-:10A87000E5F1BFEA4D31F8CD03E501F47EB3528C2A
-:10A88000FA838FD720EC56E1676F531DEB782FF7D3
-:10A8900033C6E60492BD705D27EAD8D7D9F877FEB3
-:10A8A000DBFE7EC8330FFD8D37CD5477C0F671FEC9
-:10A8B000A9FCF1B2663C37C0DEA138F4DFB57E6397
-:10A8C000B912980FF2E0167AA2CECFD753E78F5A7B
-:10A8D00006DBB1AE99C391D77150D1747A23AF869C
-:10A8E000F7F379CD86FA80C15E7E2E439157E60D4F
-:10A8F0002307A73AB17F40433B93D3A1901DCA6978
-:10A9000062F43D4ECE28EE9F7D63D436655E696C61
-:10A91000BD6DA619A50E78AFCD9DE247BDBD2A2716
-:10A9200074A517E13B198D623A67CCC92E0DE3A7D8
-:10A930000D3981AB100F729D3ED59183F627E5242A
-:10A9400087AFBD2F2FC1F536636B055CDB797CA823
-:10A95000B2638CFBBDB48FEB5E3594EC875C8F3BB0
-:10A9600053E85F370BED21FF9BB591FDB3727BEA96
-:10A970005E55427EB2A46B2C9F32AC1CF329C5EB12
-:10A98000A2DA5C78EFC5ADA684E7584C15788775D8
-:10A990004CD4AFE372F22EFB9907C85349BE4F99CE
-:10A9A0009238FE8308909E57FED8F94D92CF160B31
-:10A9B000C3FCA6C4FF869CE06C8427A7639B82B877
-:10A9C0003925EA234E25F3FCEDA935CF2AE887DDAA
-:10A9D000BB9839543630DC75CBD5C07CBD3CB758FC
-:10A9E000882E320E88C1C3E396262FD7EBAFE7043B
-:10A9F0001721BD1BF6ADA7FCDEE21DEF5BBE74FFA9
-:10AA0000E32BE24DA9E1F14DDD1C2BD55155FE584C
-:10AA100023BAD7B65868BFB26ED76EFA8E8DDDC72F
-:10AA2000FC28FF751DBB95F9306FEDAEDDCA021D28
-:10AA30001E73EB2254377E45AACC5F472DA8CFE387
-:10AA4000F91BF3FF68F78FDAB8FC9FADB487319F2D
-:10AA50007DD61CAAC37E67BD297EDC3F95787F6DBD
-:10AA6000F78D747E40EA9EA4285EDB4CDB3D56E801
-:10AA7000D776A5C58FFCB42127B40EE992A9053B72
-:10AA8000F1FD0C67AA1FF3E1BE24564E76EF2BE2D0
-:10AA9000614C1C5F8CB98FCBCB2B42BFC01FD571D3
-:10AAA0003DEDE5712E6E07A0BE3A6AE6EBD8C338DD
-:10AAB000BC666FE047C4B7C73269DE9CBAA882752E
-:10AAC0001FF1F3C6F82AB0CDEBFA3A70765850CFA2
-:10AAD000D70A7D53F9E31DCA073AB83BBC2AC19790
-:10AAE000B36B9B82F916784EFA06FA33ACB3CAD927
-:10AAF000C5F34CB5F07C814EBFC87524D033BFC0C0
-:10AB0000F5D84F761DE67A26CAF3CB02DE787A1E98
-:10AB1000F2FA68FEC96066E9BE253C14E3D0A3459D
-:10AB2000C9349E94FB78393DE4E5FE58CED61D8AA3
-:10AB3000C94E7978F2CB247CB2DFD89C09AF213C96
-:10AB400063A674111EEAB76AB49E4996E0E0253AFE
-:10AB500079F8AD909B5767FF91CEDBD9F08BB78822
-:10AB60001FEBDB151E0FB4BF6599857626FC131508
-:10AB7000F74DA671D3CE368AF3A8A675723D5CDF79
-:10AB8000B95B9B678FF169E167AFD23956F51D4913
-:10AB90000CF75381FFFE80F48BE753891FA96707E9
-:10ABA000A227E823FEFD43D822F2D7A1C299A931FA
-:10ABB0003D6D167861767EFFA258578C7F42E77014
-:10ABC000FE989EB5915C147E56FE2AD699D6FB154A
-:10ABD0003ABFC359C5F1A9876B46C27D32AE273152
-:10ABE0004FCEF32ADD053375DF93F5E97BF1FE7F68
-:10ABF00022BDB9DD88F2FBAC08EDB7843F9E7E57DD
-:10AC0000E4703F36019F693909EC99B4F3858FEF01
-:10AC1000D1F07B20C93FD390EE3AFEC9CAB1D0B87B
-:10AC200059391AC1B3B192EF5F6D34733BB671A558
-:10AC300095EA425FBB9DD7A9A57ED312C5EB11D380
-:10AC4000DC3A7C7E2487C3D1665A45DFC7815C3AF3
-:10AC5000734623FFA431AE1FB93EDCF03CD76775C5
-:10AC6000617B04CFABA90BDD3A9FEA109C363FD63F
-:10AC7000EFB2D061CBACD4FE7CE5DB73D082F04F79
-:10AC8000EBE0F227E900FA94F84BCA83C46B0C9FFF
-:10AC900011833C497A98FBFC895021F797789C52A4
-:10ACA000CA54DA17AAB1068EE2778C35623F15EFE7
-:10ACB000639DABDC4F9D2BE8F2B83D3812D7D96FBE
-:10ACC0003FF52BFAD9B5CBDFA0B8E61ECFEB7495D4
-:10ACD000720BF1A041BE2708BA0FCBE1F67D6A0ED8
-:10ACE000E79BDA511D2497B51F36913CDBA770BD59
-:10ACF000663F69D4C78C3D24D6BB8EDE9B94D2318F
-:10AD000019F721273DA138304E1E08CE45F81D18F1
-:10AD1000C64B5B0FA5DD8DF8FD02BC75DD7742DF0C
-:10AD2000CC11E743EE048413BF3759BECC1FBFDC00
-:10AD3000782C7A5CA1F342042ECFEEAABAE623DC8B
-:10AD400037D899EEC7EFF3CFECBAE5BB1F01DC674C
-:10AD5000778CF7A39FE06C0E12FFF4BA6CFEED3C0B
-:10AD60001F3A05F33D2B3B0EA5E177459F3E3BA2E5
-:10AD70001CF5F61201E767CFABCB112FAB9EF9F9AB
-:10AD80000DF8BC36A264A1FF7A76E713FF9503E3C2
-:10AD9000D4EC68C413C858F3B3BFA4B8C014D9C660
-:10ADA000EFEF4C273FF7D327D7DF80F86EEE68A68A
-:10ADB000E79F3DB98DDAAF3EF3F357FE03F31FC1B2
-:10ADC00034FA3EFAB3E70F125DEA421AD5C50FC452
-:10ADD000D71B771FE4FA12ED3CCAC11CAEC7245F33
-:10ADE0004BFEFDF499BBAED1DB0D79BF4DE441DAEA
-:10ADF00092B91D3923E4B67682BD0DAF677E66A396
-:10AE0000733B1B2CDD25181FD79572BE5891C3F5D7
-:10AE1000605DC71273839DDEA771FE0DE41DAF5701
-:10AE2000037F62FD19F4DA7189EAA89EA3FED06F50
-:10AE30002CE6496657BFCFBF2B2D6D32D7129CCF62
-:10AE4000F2E7B06AFDF38A6589F735B6E4D80DF903
-:10AE5000D19CCE19793ED20349FE213AFF37A7266D
-:10AE6000D48C7502372D0BF9F13BFA173F797B3201
-:10AE7000E6D39E19AA8C24FAAB0AB773613BCD5373
-:10AE80008FFB0E107F3C2BE4C4ED60CE6B613D93D5
-:10AE900034E6B4E395B1E366D20B4FD1F8E0E79026
-:10AEA000FFE6FBE5ECA7D0EFD9680E7947E3386DF4
-:10AEB000C23EEEE0F0C3FB0E7B398DE7B896FBEBAC
-:10AEC0004BF1BDF32BA73BD1BF8771BBCCBA780C3C
-:10AED00038B200ED238E370AF134253C87EC94CF4D
-:10AEE00042EB93E781C2FA297F2AE5333E4F83FA8A
-:10AEF00009F3ADAFE7541ECE71C5AEEE01F21CD61C
-:10AF00005CFE7C4A6E80AE5FF57CD15767F7703B84
-:10AF1000FFD2FBC4B70DC8B7387FE843839D97F5D0
-:10AF2000111BF7BF4F7C3B7F1FD7C70DFB2A2D1886
-:10AF30006F9D5911601F80A3DB20F86FA3D2BD90D5
-:10AF4000BE4FDB6FA3EF0E7B247FB6BFFF31EA9FBE
-:10AF5000A27D5EAAE7E9D9CFF9F488C944798023B4
-:10AF6000DBAFDAD6ACF4B7ABE06F939C343431E1AD
-:10AF70006F2F7B1BFDB3FA1A5E07DF10C747858F63
-:10AF80009F6A457EC900EF18EB32C09F994CDF6D78
-:10AF9000D6B1D128A7391303FB7369FF9BC7E739E3
-:10AFA00035A04FA07D9373B11F4B073226825F8C73
-:10AFB000FCE7BCDE8FF9A68DF91DADE83F87273190
-:10AFC0003A7775A3B97D02C6C11B27F91C8049C019
-:10AFD000DB0EF2AFD9508BB067F3C92F6FF0FCAB2B
-:10AFE0009FF2C1F1F2BF7F25F9770DBE643F9E83CA
-:10AFF0003B6D9FB294FB337686F037007EB13D2DDA
-:10B00000725D04E13927F027F1D863EEA2F3787B73
-:10B010005E48A2F30DA74DE4FC9A31B183F4C76BEF
-:10B02000FB6F247B2DF932756F12D9ED4CCDA1F851
-:10B03000295F744B12C2334FC0D32EEA8433841D70
-:10B04000295EC7FDB8CC5C2E4F99B92671B518EBB7
-:10B05000AC1C61CA3B9C13F42736D19DFB543F3F87
-:10B060004AF254B78B8FE74C0A94DDABE35FE95F9C
-:10B07000C97A03AC1B989180BFC7E6723B58F8F8B9
-:10B0800052A2FBBC1A713EC43AEE5730E00BC41B0F
-:10B09000D091F8E026E722A2DBBC75CA37898EE1A1
-:10B0A0000ACA1B4AFF2C7EFC71627D3B6DC1515860
-:10B0B00067D8EB4AF5E37ED7CE8C8089F2EE65192E
-:10B0C00094077165717FD125FCC598DC07479960AD
-:10B0D0009E4FDCA99CDE91DF6898179E92EB4BE8AF
-:10B0E000E7F58FF3F978D3DBC3C331EE91F5611245
-:10B0F0001F9195C973F4FA7482A04B64189B837AEC
-:10B1000003E2093BE5AF1D300FE613B65FF724CF2E
-:10B1100027F073A1AFCAE5DF354FCA0A8EA2FDBF83
-:10B12000E2E0326E3FF93AE3F1F1BAB09BAFCEBE46
-:10B13000B30CE3D8865BED7E94BB0D2F297389AFEA
-:10B14000C3563C3C08F89ECB21384C540FC5421ADC
-:10B15000D1A3A1291849CCF73348CE1AC0EFC33880
-:10B16000601AF2B993F83EC2F99EDB3F996F403DF9
-:10B17000A9F7B7A53E907A06ED1BF2B3948B861B18
-:10B18000BA4B90BE5F55AFF498B99CF7001E508E35
-:10B19000A4DCA4BEC8E565CD4A5F253E5F0372AF5F
-:10B1A000A7777C7C867062BC22F5FBAA9CE0B77313
-:10B1B000114E53B495BE7D15FAB8E1C5D52589BEAB
-:10B1C0005F92FAD82ACED3B4465222FA7D06DCB377
-:10B1D0004F2DA76B18ED51CAF2C4F998D5B9D2BE5C
-:10B1E000F6AB775A9DEBEA5FEFE446DB85F2B33DC1
-:10B1F00085BEA393F9A9F871BF2FF84DD245C62992
-:10B20000B85F80FD9F12F2B359C8E973E2AA8B7F41
-:10B2100088FF7DA6D0FBB8DF3F901D93EFFDB3F212
-:10B2200065721E694FE3E92FF73B703D334A07EE25
-:10B23000D77E50C48171FCF882F0A7EECD65746DA5
-:10B2400037473F27B95A92CA689F6D330B64E17E36
-:10B25000D92B57707908F496E0F857E68732F24612
-:10B26000C7F2C2781FE3935A8D85719FAC76A739D8
-:10B27000A2FF8E67277E4809FDCFA75AC32AF0F99F
-:10B28000B8FCD061A4677802FF5E2FFC3D1BEDFF88
-:10B2900080233D1AF54B23EB4E433C37A85D2598A0
-:10B2A000C7DCE20EBD8EFD4F99BA0A78BD05DF9F5F
-:10B2B0003A29F2BE2745DEB7D312CDFF8E3376CEC4
-:10B2C000DD05C6EB752E749932310E7C6FDF3B3F86
-:10B2D0007B09DEBEE3A573777C1FB1B526E5CE1FE3
-:10B2E000C1B5DAAA06F5E7FF9C4C4DAC674F093EA5
-:10B2F000EAABA759999430EFBF278FF34163DCFE87
-:10B30000EF9E3C1FBFDFF75D16DFFF7D6F8073B2DE
-:10B3100026E771FA748A3A9FF8E7D3C43C3BCDAC78
-:10B320006433C2B32D95F6D799C6CF37AB79A4D085
-:10B330008FFB929D45FCFCFCDE4715B20327CD5CDC
-:10B34000FFC0DFADD68A981D453705FDC41A4738C2
-:10B350006A02FD51B32C358AE767C27D6D1CCA5A5B
-:10B36000D841F5A673857D9CD7F4DADF30EF51A381
-:10B3700031EB3878EFB47D7E1A9A8785DFBA178F64
-:10B38000C061D9D5EDA22E519CD71698AE5E4AF970
-:10B3900032BFCEF85DCBDEBCA015F9AC3A9DE3BB65
-:10B3A000FA5E7E4EAFECFF9290DB7EFC86BC0AF02C
-:10B3B000FE51E1F6257E1E77FE84E751BF2DF7048E
-:10B3C000B368FC7BCF19F45A8FD2FDF48F902F977E
-:10B3D000A48A73D45881BE5ECA9FC7ED4B2DEE3749
-:10B3E000816A3C5FD655B2BC10F9BFB7E077987759
-:10B3F0003B904475B1B5B8EFA4AB671B68DF69E05B
-:10B40000FD269F05F9BCE1A2427C32F7C06B2750B4
-:10B41000AF3768DDC43F73AD76A24FC3458D9EB391
-:10B4200036F359FD777AED9EC0705C5FF8C17119F3
-:10B43000B46F950DF709CF43E99C8FA5A21ED99D46
-:10B440001F1A8DFD36A5A4DD85F1E1052B3F97A9D7
-:10B45000D1C2EB8E99F8FE59F209CB4B35F2C1817E
-:10B46000D7FF8670CDB786E81CCB05739AE8DCDC85
-:10B47000EAF4E86847A99EFEE3BED6B9B95EA137F3
-:10B48000DEB3F0FA9CFEFCCFE9B0278FEBAFF7728A
-:10B49000B81CBD57C06AF6E0F54AB8C27BEF158903
-:10B4A00076396FC78FD328E4E8BDE1DC7E8597A6A7
-:10B4B000243C97E46E218F7BF302B723BEE4FDA703
-:10B4C000051CEEFC40759E8BF46348F06D3403C69A
-:10B4D000ABFE25FF1D03D6D24B75257DEB2A11F05F
-:10B4E000BA13C3D5121B77118E07FD02E4C7BF62E2
-:10B4F000A3EFEFD874D0D7A89F97E633D4CF306F9F
-:10B50000631E1F379A41FD92681DAC0DF436F0EFB3
-:10B51000F9D13EA2CB9A4AE0D351E25C7E5F8CAF78
-:10B52000243FC5F3D17D79CA40FBE2F7E17CF1FB12
-:10B53000E28C0D267A13BF7D8DEFD8466471BC80F6
-:10B54000DCB7E691FD8D5EAD973B8967A92FDF4B98
-:10B5500036F245AA80F307A25F1F9EC5395ACE6214
-:10B560006E0765BCF0B8E89F21E82FAFD2AEC5EFFB
-:10B570000F64887133F2D2245D1E13F4CE4848EF75
-:10B58000AD9CDED0EF09EC579DD47B6716D8B3DBBA
-:10B59000C04FC2732FE13D2FDEEF97B798C8ED7013
-:10B5A000E3D254867EC24FF244DE6F542FDFBF1BBE
-:10B5B000DA4BFA682E03BDA35C9E7E9823F0823E90
-:10B5C0007C43D40F2958CF93496AC087E301BE3B1F
-:10B5D000F35C317CC7CF77121F815FF84A9EF8BEBB
-:10B5E000AF8C9521BDEE7CEBCFA977F8F01C74FEF3
-:10B5F0005DF147F6D0AB38CED9EFBE4E71C0494BA6
-:10B60000B4A4DD9EE0B925FAF82625F6FCAE9FA885
-:10B6100061FCDD8BCEAEB38FCE06BE9CDBA5FA718E
-:10B62000CAB9F77DFEE618F4AFBBCCB40F05FEC572
-:10B630003A3C179435717FF4A4C948FF33DF36D6FE
-:10B6400075740B7995DF3B4B7D25FD86C5CCCFF519
-:10B6500054323F87FDD49245F4BDF37C163C8AE713
-:10B66000B07FBA742AF9D38B58887E8F605E9BF1C5
-:10B670003CDEF8737CE3CFEFC5043FE22FFE1CDF16
-:10B68000BE7C7B55623F23359FF3E1198BA82F18B1
-:10B69000C0CFB828F857D61734CAFA8297BFBCBEB5
-:10B6A000A031AEBE20E68FC8FA822F284F68CEF7B1
-:10B6B000D1F8389EBECEE0CC84C4702BF9D2EF49CD
-:10B6C000318C2FC789CD9346CF1BF13C9F84DFABD4
-:10B6D000DBE9FE998589E749CFE7EB6E8CAB67889C
-:10B6E000BDCFEB18649C2FF9A2F1A297ECB16CF7D7
-:10B6F000FD0E43DF7B79F43CFEFB7C99A79772F04B
-:10B7000081C2AC5ECA9BAD177AD13F1CFDDF0FD062
-:10B71000AF4239BCD1F74A378038EFFBD794684540
-:10B720003139895F07F0D367FAEFE087E48B7379EB
-:10B73000FDCC4FDF490A3EBFF3BB93D2719FF5DFCB
-:10B74000EFAB327CFFD6F77DBC45FA7376835D663E
-:10B7500071767BDEBED7C95F9B6F0DD277781FBD38
-:10B76000FC5DB2D70B59D08DFC7DFEE52B0A42FF64
-:10B77000037B2DE1B9257CB799FBE94EF233660ACC
-:10B78000786E39C0FD45933560A67902CCE77053D9
-:10B7900028CEE105A589E7F05DDF077F299DDF3130
-:10B7A0004EC0AFE0FB80DFEBC595CD0D79106E7913
-:10B7B000AE00709307AFCDD7F87D781DAF0435A6E6
-:10B7C000FBDE74326BCAC3FE266BB72ACE3BA3F3F3
-:10B7D000E39362F8A276AA68B7DC7AE1CE0578DF57
-:10B7E000CECF27B6083816E68BEFA8ADCC8AEB4E45
-:10B7F000B2473FA57D40710D4FE0FE77B888D7ED89
-:10B8000026E3790A30AFDD7E2E8C8B7530079D13D1
-:10B8100060735C88621CA2FB1D897BF25DBADF91BC
-:10B8200060519E9F1AE879DCEF4C640AF89A857E95
-:10B83000F3E27987C574AE03E9B7875317D239E4C9
-:10B840002EFB32DA9FDE923685F62FDD8878AC53F8
-:10B850009FA23B97019EBB82C6F318B2E718DBDEBE
-:10B8600090B16D6527A93E4A89063D97B262E74EC1
-:10B870009A85BEB83599C3756B328FD756E71BBF13
-:10B88000130DCADF7FC9E4E736F4B8AD56ACB7C0D4
-:10B89000F83F9FC7FF7F044A435CC87F1FA66C7CAC
-:10B8A00060C8A3A3F0774F54FF2AA0536BAA6FA5DB
-:10B8B00086FEDBEDE277C2B40EAA63D8766706D5C2
-:10B8C00089B6DA1C9598F70CE7F37C4FA3A8F70725
-:10B8D0008AD4EE82F7B6CDCCA57ECEAA5ECA97F604
-:10B8E000AE66E41FF5E3D32F80FF01DF4F621BCF6D
-:10B8F0009398EFEFC2EF88BD0195EA74E5F31DF868
-:10B900001CE054045FE0FDF115B1DF712A3E507672
-:10B9100008CFC36421C5CFD38F3EE2F759C22F6F42
-:10B920003C5079F36880ABB86B24B1F1E00362BF9F
-:10B93000C59924F68DF9F9BDF1FD07637F68A71C51
-:10B94000F3FD6B1D3E32419C8DEF4D48A1751F17D5
-:10B95000F92626F4C39838F9BB2E260FF4BC4CB454
-:10B960001B457D1D9E6111A8E0E90CEAE7E4F2E1C8
-:10B9700067F28FCBEDB52CF687E354C5C6253D3570
-:10B9800031F6382687B0C472ABBFB90EFA1D99C123
-:10B99000F7D7C768D18328EFD7896B99B8B2B9EDCB
-:10B9A00084DF352B032AA3128890BA1EDA63AD5DBB
-:10B9B00059C8DFE3ACDD2B5D30CE3573EEF660BBEE
-:10B9C000A4A098F80DFC2F3A7728C36E8AF0EF28D0
-:10B9D000CBFC2847B3E7F07CECAC3956AA3B9EA5DC
-:10B9E000F1F3A198162ABC0D9EDF56CDF3C0D8AE58
-:10B9F000D6E559E4BEC7718853762788374B0AB815
-:10BA00005D94EF378AFA1FF9BC080F8AC63C59C10A
-:10BA1000E48FF2C99EF0FDDD3352CF0C6543E37E27
-:10BA20006FE67C3EEE5F56BE31909E303E177A62E6
-:10BA300056E01133F9E9425F48BD1C14754D5DE2D3
-:10BA40005C97772770BCBF5DB998F4C5ADAC89F43D
-:10BA5000F96D2C6C467CF7E9FF293ABF06E699158B
-:10BA600034FA39B3E7C4FB3D9C5FE5BCB7878CCFA4
-:10BA7000674AFF758AD17FADFECE17196417B39F51
-:10BA8000AEBF342856BFD41857BFD420EA971AF750
-:10BA90002D39E2D2D52F351EE0F54B0DFB2E57BFC9
-:10BAA000D44BFB48C7CD9183B8BF727C318804C0AA
-:10BAB0007948D4BB1CC67A97F2185FA6CEE47956B3
-:10BAC000605FDA2FC973A4F8D15F6F3395535EB608
-:10BAD0002D2DD5AFCF83AE59199AA4CFC7CA7AA559
-:10BAE000E303C4B7C30BB8FFBA51E179F1F0ED56E7
-:10BAF0008AE75CC541C33E844B652730BFF811FA25
-:10BB000059A3A93FE53D701F6F245C230AAFB3EF33
-:10BB10007B1FBF3BC27C649C3E7265F9691FC09568
-:10BB20007E35E5F3E71C28DB41FAC66EF3E3EF222E
-:10BB3000CAF1E784B6695847D478609B36DF1EE3C4
-:10BB4000BBCA02C1AF292C05F9B52FBFB72789F2AF
-:10BB50007B1FD983930AE0FD3A4B743833F233DD0F
-:10BB60001FC8AE2D12FC629E10BC7D01C073FE4D3D
-:10BB70000BCF73DDC7485E9FDF9F41F9496D2623D8
-:10BB8000FBD252C9F8EFC06CE3DF0B9CCEE0E718A4
-:10BB9000B5CC6064077B322713FD16B3C8513CA7B0
-:10BBA000A866ABD9701ED13D3B8CED3AD641F6A6C6
-:10BBB0006E573F7E26BD25F5633DF3A966DC07E899
-:10BBC00034BECF061BF56399B00723674D6CC67A68
-:10BBD0008D91A6A04AF6F73E7FEE4C8A9FABB91D29
-:10BBE000654FD3F957E7533F51B99C737D3C3AA653
-:10BBF000350D7669B4F0AF6ED0F8EF2A487F69B49E
-:10BC0000F89D85C3A6032AFD768F806794784FFA46
-:10BC100069525FF7D1732CE852E0FB07255D8B5822
-:10BC200011D215C627795030C0C9A4F1E9F71AAE70
-:10BC300013F301DDF9F977266B04F9A85569223D64
-:10BC40006D65425F2BA1667CF917E130E9ED6B5819
-:10BC5000D32DF87B9FE3AC5D29E497DA436B0B5C53
-:10BC6000313E6966D182DD8A815FE8F9D98C37126D
-:10BC7000F28BB42BD177B9BF318D811F08F3067ECB
-:10BC8000CFFDA0C30A8FF3C01F3C8C71DE1BA6A999
-:10BC9000C40F536119D86F92C348E71B3DC6F654D1
-:10BCA0005F3F3E50F5BF5F0112A7213CD3861AFBD0
-:10BCB00005A47E6346FD56C8BEE075E5AB8F7E0BDE
-:10BCC000E3FF94E56C28FA31E039FA13FD1EE973BD
-:10BCD0000503EE933C5790609FE4BCC8F75ECBBA77
-:10BCE00017EE52FAF34DCF91E5AA47C75F929F5FD7
-:10BCF000147515CA2FC57EEC289EF78BD979CE37DF
-:10BD000015A2752DF25D267E7F22F845FCBEC8F592
-:10BD1000FB6C51FCFD9C3231CEB5C83FE531BB1EFA
-:10BD200035D97D9622E4137F9BAAF6F7E7DD993E8D
-:10BD3000E297912669E7FD598CEC7C47B386F0EFDA
-:10BD40001F931BB21BF8E31DAE4F803F282FD5CFAA
-:10BD50003E1A9FC7F18FA4E331E147DFC87C144747
-:10BD60004C117E74B490F34F95FD560DDF7FAD8876
-:10BD7000E70926E206227DEF69B48B5556231FC4DE
-:10BD8000F317CC68D2CF1BCF6F03F1CD20E41B6932
-:10BD900017B32ECF379F0B3F2301DF7C5E307A60D5
-:10BDA000BE89E717A95776DB1C5578A670638D42CC
-:10BDB000FA78E49B839BB17D457D21D5BDECCEF027
-:10BDC0001FA2E74DFCF9A8AE808A7531C5CBC4F33C
-:10BDD000C26015B61B97F37D89D1C779DDCCE0FB36
-:10BDE000F8F3B2554D87F0BBB8C6307FFFC54F5B47
-:10BDF000E97BA148AB78BFB2BD0ADB8D6DFCFDD3FA
-:10BE0000B8BF3402EBDD22CD787FD8BA423F0F4B6A
-:10BE1000B95F3B5EF0E96E65CF217AAF9DBFB7E8B1
-:10BE2000A835997E6750F8AD3788758EDFCAD7E997
-:10BE3000FCE026FADDD105BD61F29F3E36D5559076
-:10BE4000DE1920FEAC54DAF3F07A23EA1315E90781
-:10BE50007C5DC4F71FB7C314658378FE42EEDB61D7
-:10BE60001D81BE6EA06C10B7FBB29F3B937FD7C500
-:10BE70001E4BA5BCAFDC578C6E620ACA19AE51F8D6
-:10BE80000109F7196F2C6EA2FDC51B07C9FDC56E10
-:10BE90000DCF752FBBF4E7C989F22B63C5BC9F8812
-:10BEA000BA0879BF265248BF23B61B9984BEC77E05
-:10BEB000F237D416E79433F11DD8EE42DE9E3CE80B
-:10BEC000891FB6E5017E4D4D1A9EEBC60A14FA0E87
-:10BED000EE5FBA58343DAD3FFC376A2C6AE1DFB102
-:10BEE00011FC0B9B2DDBF9F7885C2FCD926A67DC88
-:10BEF0001092D35B059D6E1924F29223D948D43752
-:10BF0000B304DD6EB382DF4A7AADDD1C27FFB307D1
-:10BF1000A1FDD832A0FF6C7C1EA71F6AC4BC0B8594
-:10BF2000DFBC187FAF54C5F3E6B9FFFCC916EE3786
-:10BF3000DFC33A288F78FE31EE2FD6C3F2905FFA36
-:10BF4000FDAED74E63BBBE23FE7764F9EF10F6FB60
-:10BF50009DD6529E9F3DBFA5BE02F373359BDFA4C5
-:10BF60003C708DD41711A3BE000783EB8B4D575245
-:10BF70005EC764E5BFA33912F405D6978CC4BA51E5
-:10BF8000187FB838876735BEC2CFDFF9EE20B237E9
-:10BF900053A8AE94C653693FF7CD802F461F69372B
-:10BFA000E2F54599CCD70CCEA47C96D41F658CDBEA
-:10BFB0008B78FFE811494F11F7483FA30CFD0CE0C7
-:10BFC0008F2E933D6232E9FD8A08C921C48DD36C5E
-:10BFD00045C83ADC9F1A79FB28ABA03F8BA3EF261C
-:10BFE000A2EFC0F193F1791CFD65FC5221E87F3B83
-:10BFF0000B505CB457D0FFED77F9EFBDCDB22F23D6
-:10C00000FE7BF7F7DCDF94F1D3D78F9B02EA3F1278
-:10C0100037F5D1DB067E640AFE1EC6D4218FE27E90
-:10C0200078A78DFFAEB5C2E9EBBEFD78813EAFF8D3
-:10C0300036FE7E8BEE77259AA72659711FB0D9CC94
-:10C04000E38A99D3DEAB98ABD31B8559952F0D1A94
-:10C050008DF4E8FAF61F30CE785D9CE37AC045F4A3
-:10C06000BED0C5EF5FD87A953F0CB7CF98C579465B
-:10C070004AD3422C8192702C14BFF7F259CA2BB4C8
-:10C080007F3C2323740CE970CF1B7B295F59C7BA0F
-:10C09000F8EF028B7107CE4B86497F595EE5F6B00B
-:10C0A0005749F6F3EF86C325FAFDA4633EAE67C792
-:10C0B000E5078FE33CD2DEC5D7159C5C72237DD7A4
-:10C0C000F9171648C7FD4C45E3BFDF1C3F2FD611BB
-:10C0D000B4E8F2D9276D89BF333D3588E7038A106C
-:10C0E000475807911BF800F1F78988033F11FB5A65
-:10C0F0009FA4F17DAE9EBEFEFCAAF9847E16FB6075
-:10C100009F641AE347D9CF22AE1FAEB0065B74F42A
-:10C11000F46D4A6A8A501D95A81B59C678BCB43F75
-:10C12000C3700E4186AFB2C887FB14C5010BFEBEBB
-:10C1300077EF7E6E8771FF19F7872339A12F10EEF5
-:10C14000061F0BE0FE2AF3755B6EC17D46F17DEBA9
-:10C1500079C12FE76DFC2AE1FA6FC3AFB72E0080DB
-:10C16000000000001F8B080000000000000BD57DC0
-:10C17000097854D5D9F0B9732733133213261B84A9
-:10C180002D4E16B2906DB261D8270920B860C25208
-:10C1900051B661DFB209D88FB6F6CF601090475B19
-:10C1A000A8B6C5CFE51910A8562C1183460D1A94D0
-:10C1B00022585B4704454B75A4CA222189602DF69D
-:10C1C000A3E57FDFF79C93997B3361FBD5E7FFC83D
-:10C1D000F37072EE3DF72CEF79F7F3BE27518E8A9C
-:10C1E00024471C63ED77FB4D4C652C4AD62BA09E53
-:10C1F0008CF5F2244711D4A7C8F7A2FE10AFC33FB5
-:10C2000003EBC5D81CFCCD01A5C5DAA2E6C0EFEB57
-:10C21000C25AFDE9F49E5D4A624C51998745432517
-:10C220009D39CA6DF874B8FD442614E1F01EFAA9D0
-:10C230003159D729B9D4BCDC02FDCD10FDB1FE3691
-:10C2400023F63F9D77C566341FFC5689646CA6852E
-:10C25000ADE907EF6735F736C10CD8A2484FAA3DC4
-:10C260000B5B8CB69F8071154F847A2902FAC67FCA
-:10C27000A3BA968C19D909393F5A8787315CF700E0
-:10C280001FAD6B7D4947C27F1732D6B1C76CDF0245
-:10C29000E35435BF7554817555C9F5356AD797EBA9
-:10C2A00050E87BC62CDECF2D8CDDCE14D613FA6978
-:10C2B000B2BA73115E55163FCD137A349567C368D1
-:10C2C0006B8747D1FA7BC3F7309F17EB5CECEF61CC
-:10C2D00001782EB3F3F58F512BCB4CB18C9D9BC7BE
-:10C2E000EC6678B4ECE0DC7A0BD4973DC0EC7C745F
-:10C2F00097810D86FE05BCBA9B5F5CB981392CA283
-:10C300008EC34EEDC11CE9817A1F77B4A60EFD32B3
-:10C310009CC752D16FBF457D35DF0FA84DD2B4BF4A
-:10C3200061E520CDFB444FBEA69EBC6EA8A6FDC015
-:10C330000DA59A7ADAA69B35EDF358524F06F0AF69
-:10C3400039A0322F8036C33B51F33EF3E9BB34DFD3
-:10C350009F64B5BF190EED1AC3237318E0517D78A1
-:10C36000E4162C99C7E5CB02F8CC13EBC86E98A362
-:10C37000E9E74CE4D803B8AFF37C0B6E658057B99E
-:10C380004D4B34FD2E552BF9BE6D083BEE87EF6A01
-:10C39000E107E199CF3AF6F783F9557B15670BBCB6
-:10C3A0005EB889BF97DF2D6EDA4CDF2DF66A9F2FBE
-:10C3B0007D5A5BF794B2F45A2B63CB1DB658C287F3
-:10C3C000BEACEFA520BA0AE0013482F1CE3DAE7AD0
-:10C3D000CD89089FD4DF0E27F88431AFA3EB7E9D73
-:10C3E00063CCD982ED77D89C1EA82F3C3897E663A2
-:10C3F0008ED7E241B8438B0711E95A3CB039B5FBFF
-:10C40000DEB358BBEF7AF846B9065D16BE31E3B429
-:10C410007821E15A0C3FDF255C9FD0C1B3609FAB10
-:10C42000DE4A7062932D83117E7CBE6656AE229FDB
-:10C4300063B1C067E0B99377C1CEDAAD1E03E0CF38
-:10C44000730EC578C212E827CFD8B217D7B346F11A
-:10C4500030FC2E9C79E3915FD417B724B4C0BEE4BE
-:10C460005B6A71E7D817D6F2E791EE2B4D2D39F8BC
-:10C470005EF6F785D54DCF5B95771630582F33B6DE
-:10C48000E4103FB4301A5FC271700F8EC74B593938
-:10C49000F1E117053E7FFED12282E30256BBDF05A4
-:10C4A000E39DF998C37731F350BBF91BB470E802F0
-:10C4B0003F1DDC006D1C386E8D58F712C6BC86E43B
-:10C4C000AEF0549A95165B0E82A159F26DF7A50253
-:10C4D0008E7608CFA1ACF31FF16F095F68A004F35B
-:10C4E000271CCFDE2B309E84A7E45B721C33AB5538
-:10C4F000E3910E747C8CA56BF709368E617DB0A834
-:10C50000BD023CD4122D06EB85FDE0E419BB518C35
-:10C51000C3E6B8E3114E16B681F66FBDE25CA7C262
-:10C5200038EA0D89F50CE0596077A9B85F45CC373A
-:10C530000D9F175B1AEA8DD0D50DECA2FD04C81330
-:10C54000D67B7BD5A598C03A14B92E8FC28C501FCC
-:10C5500021EA933C8AFFB1445CCF5BDFE2B823441D
-:10C5600039094BD83F58E6DFFF0A1F0F571C0370ED
-:10C57000BC89AFA4C521DEAC516A996E7E475F8548
-:10C580007E5443470CB61BC3DC462E77BD3849F6B4
-:10C5900096E2A779FF88B9EEC752CAB76AD6307655
-:10C5A0001AD4AB1B416E456219DEA242C99A74F0DF
-:10C5B00064C6E35837C04A10BF97625DEE7B62E005
-:10C5C0003DD5D5AEF555B0863ED15796EF1B13ED50
-:10C5D000345F907FA9FC3DE76F8B04BC1649B9E539
-:10C5E000D5CEEF18FED287B13F9A0026F9484716FC
-:10C5F0008FA127A805894097D82E87E560FF40576F
-:10C600008E44E8BF5734D0A1124C77BCBD7CDF8587
-:10C61000EE74EB67B5B0B94300DEB642931B58EE3B
-:10C62000DCE0F55E053CA41E310FDB42F92F878369
-:10C63000D65DD5E3D8072E7C5DE84B40F92FF7A9EE
-:10C64000C6C4DC0DA8B734C4D1B8F2F9E84483D02D
-:10C6500027001FAF024EDDEF430AE943721FAE56BB
-:10C660001FCA451C2F0AC0EFE6AEF09E90181704B3
-:10C670004F06F0CCD6C05BFB5EC05BC2E36C916F33
-:10C680003BEE936A3BDC0BE1BC32BE7C12EECF800A
-:10C69000A3FE138A2130AF316AEBF6C7508E35A95D
-:10C6A0004EA4E5EA119CCF55BFAC12E9B7359BBD4E
-:10C6B0000AF4B3A8E94DD2CF5AEB809186750FA743
-:10C6C000CEF5EAE0DD151E7C1FE57A96EAD63FF34B
-:10C6D000BDF3B6190E5A67CD15E050130A0E677EEA
-:10C6E000CC669567E1FAB27AFAB302E366E1BE037B
-:10C6F0001C7E1E597E0FC2A3F0FDFE91089F316A79
-:10C70000F3FEBE0887158AD30CE38E32334F38EC24
-:10C71000739F9565ECEFB057C5FE5AA71DE011DF7A
-:10C72000DFEA54011E69F7A8E55EE8F76F2B96472C
-:10C73000CF85F2CB3A187A203C570CE5846F6CD742
-:10C74000273F85FED26CD39DEBA136C30CF38171DC
-:10C75000127F1CD1920C7CE27513B320BD8525D5C8
-:10C760001E1A0FFD7644A94ED4836355361AF14B39
-:10C77000C2393682AF433E2F7962ABE2B7069E8F55
-:10C78000AAEF285806654522DF77B9CE51651D0509
-:10C79000A8F74838C726F3F6CCD8913031883E72D6
-:10C7A000053C8EA15E07F0AC8E33AD4139D866E111
-:10C7B00075E64A27FD778585D3C7B1F0042FCAC730
-:10C7C00063B0561FF5D76263D620BE18EEEA792310
-:10C7D000AC9BBDA7B26D507C6D77F58C2278D87973
-:10C7E0003F42DF6A636C1CC269C5F8D2DED150C615
-:10C7F000D573F8E8F1A43191EBFD951780F00A02AA
-:10C80000CF2B8D2D26BB159F9B34CF8F03DC3CE6B1
-:10C81000407DCEA994B18CF88C730DB69FBB2E824F
-:10C820007982F4AB46318FEEE0521D656446804755
-:10C83000B5C2CA2FD7EED5FFA8045FFDFCFF2AF8CA
-:10C840004C5C59E8F51D12EB2B5B7BEB6F51FFAC99
-:10C85000F68531333C5AF172496F16A2BF4E385FEC
-:10C8600018C6BC314175A39FE0517D61243D2F5B0B
-:10C87000DB6A42BCC77E1CF07C45B8ABB7F33270B4
-:10C88000CEC579E07A2F44314F4CF0738E5781FE3C
-:10C8900063E9FDEF118080B79E26D5BB0D3EFDFDFF
-:10C8A00001C3B82DA1E62BD63F28CE48F492D9C2B9
-:10C8B0005C9B438C2FDBF58A067E6DE570AEC8EE7F
-:10C8C0003ABFC652FF4C9CFF8DA3992BD478E74406
-:10C8D0003B39EFC668FF0281F7A915B6A0BA5DBB68
-:10C8E0008F3DC5F88D37FB13B0FFB6F16C6A4388F6
-:10C8F000FEE57ECF88776722DFA9BC031A037E0C92
-:10C9000036D62AF6207AEB6EBF037006BBABE07218
-:10C910007036D17BD9DFE943821E99CBAA001DCDA9
-:10C9200016F26AF6D6A5B702CFECB45F4E6F02FBE3
-:10C93000058638CD6ADFB4617D8342F6C91C37C8ED
-:10C9400000E0370BB615AC41B1353B9EB191D1FC3F
-:10C95000F9BD58AE0E0BC859FADFC582E5A21C7F9F
-:10C96000DE835ABD75117BF02BD47B4E1FE27C0118
-:10C97000D453B2BF173CA2ED6FD1D65B4EE23C1749
-:10C98000E9F49F3454F040FF484B12F6C460361867
-:10C99000F9FFB26DE74D918EEEF1FF4BA0F394815C
-:10C9A000C827ED540E4D72E524A17FE13D3ECFF145
-:10C9B00049EEFC24F4A3BCC7E775AEF21C970F8FB9
-:10C9C000C7925C322313875FCDD32CDE7A98C75A87
-:10C9D0006023E1001FB399EB4152FF53D5E56A2470
-:10C9E000BC1FF2C58A6837F2E1676F1A87FDC53D43
-:10C9F0001BE1C2F5AC2F71E5A1BF607D85D5590F54
-:10CA00005D5AE07B941BDEDF0F79A32F6A070D1BB5
-:10CA10004BFB21BA35EF6D417FCA3AC357FBFB414F
-:10CA2000FB752399B39E05C6A969AE781EE79330BE
-:10CA300099CB97F589AE3C7B50BF4CE873D5027615
-:10CA4000ED7BD27E390CF6F7B103A44EC3FAC09E3B
-:10CA500087F90D627C9FD9458013E0098E1DACB724
-:10CA6000B6829C626981FAA006A5250CD653D5F83A
-:10CA7000BC01E560E57D2DBDA6A13C7AC6E8DC12CF
-:10CA800034BFD8D7FB943A220372689A62273D419B
-:10CA9000EAE57732F92F8BF066AAC09B3B853E3ED4
-:10CAA0002D82C3770E7326E077775958A401486921
-:10CAB0005A594311C9A9A5615128FF712DA1F65BEF
-:10CAC00096DDF995AAB7DB3C0AEC7B9BD2918A9D57
-:10CAD0007C89BE1EEE5FF26E49ECDA4F5D92A0C318
-:10CAE00054A11FA630970DD65DFD5ADAE6F5F0CABF
-:10CAF000DC03F6319FF891A5389FF4630BDA3D8B88
-:10CB00005F0D6F512203706176579E01BEAB99D8BD
-:10CB10003F7F3DEAA44781AF0081B585F913888E38
-:10CB200081DF2820F336258DAD3002DE55F705FD77
-:10CB30000BEAFBB74CAA3002DE5727F91718A0DE24
-:10CB40009654C5EB83FC27B07E216925AFE7FB1720
-:10CB5000A8508F495EC3EB6808026239921FAAF0A1
-:10CB600040FF5F4609B9EEF4CF44FCA97E25CDB065
-:10CB70003E68BDD664CEAFBE0CE7EDBE4C64B326B6
-:10CB800022BCD3FDA9384FD9AE2349EAC31BA8BDA7
-:10CB90005CA7FC8EC587EEFF7749BCFFC565421FC9
-:10CBA0008960EB106EB04D9E4880FFBEE6B42DD874
-:10CBB000FEC1A468DEBF1DFA290CF423E128FB9313
-:10CBC000E32E41798B7C380CF870101F6D4CE2F22B
-:10CBD00012C6594DE3A400FCB1BF89FDF370DF60BC
-:10CBE000BF8C62BF8CDC4EDD4CEDB1DFA81CE2FBDC
-:10CBF000054658C7BE8BD03E31306F3D7EEC15F8F0
-:10CC0000B1B81E1821E967C98447A322B85EC80AD3
-:10CC1000B5EB8849E6F0B32647F17576EE476F85A8
-:10CC2000C6A91770EC0F70CFBEF675BF2FE6F35D87
-:10CC3000AF3B68BF5C2ABE6FCAD812BC1EB02C3591
-:10CC4000FD7CB94AF75D311020AE333A99BE5B1BCB
-:10CC5000CE2CF49C6DE9FC2E3187EBA3A8A75609D6
-:10CC60007D9A79469253A152708DAA753E9303DF47
-:10CC700037282EAF35787DB7168AF5D9C5FAEC7C02
-:10CC80007D5E0D9EB2C31D09936D5DF1B713EE9DE0
-:10CC9000FD65E58BFE34741DAA3FA48FEEF6232CB0
-:10CCA000F93BDE0F394F1D3C3BE1AC9B9F8427D203
-:10CCB000337D97A5C54739CF0B823EBBD075E27552
-:10CCC0008E57C2BFABFA09EC23EA270E2D3E57352B
-:10CCD000261AE66405BE6BC2BD2C0AF8E7D293851E
-:10CCE0009DD79FF547FEED29E57E54CF2EB3B3DEE9
-:10CCF000417EBDACE4B8907E3D7AAEB7F3DAA34C8A
-:10CD00004C21BD48EB67688F73FA5CA89F9E65CE87
-:10CD10006DD0EF309DDED10EFBB9CB1AF82E204F2F
-:10CD2000B4F59F083AE8EA37EA48C0F9159A4B5F2C
-:10CD30007038191B9BFC14F1F7C29EA5CB13A17E82
-:10CD40004BF236E2D785FD4ACFA36BE6B6E4EDBCE5
-:10CD50009E597A3E09EB4F6DE7ED47B95E40FECE36
-:10CD60003CDB2B460F09E80F13921D5CFF28333084
-:10CD7000C423B37AB713E5A484677765A1D9501BA0
-:10CD80004A6FBDA3939EF97946B190CFC5D28EF775
-:10CD90001B35767C7BA4C5A3025CDB519EC27AE77F
-:10CDA00024BBA723FC6B225A67A20A7C5FC42726F8
-:10CDB000D4871417E81BE81771D8D97498A7D2BA8A
-:10CDC000BE9CF4C0254E8B91E029FC54B0F64BD0AC
-:10CDD000CFABAF3DF3B37E7C98729CC71041FF355B
-:10CDE000AF7DFBCD5F518E7E6975A21B7048F3A3AA
-:10CDF000CB51BF1AD2FCA76FB9BCB5D239959CF7FD
-:10CE000010F437C2F3E22633CD7F4873C67C6C3F03
-:10CE1000ECFDE664C48F11C75AEA911DB4EF79A9FD
-:10CE20009F3BF8DC8A9D542E655EBB7ED1098F2F17
-:10CE30004C0CF54B80C7FFE1F0B8B800FD8A6D716E
-:10CE400087D6F8494FEBCFFD98E27BD0CBD391CE7C
-:10CE5000CFB11E4E3C5768B7F17EF4FECDA315B09E
-:10CE60003E783EA2036610A4378FBA60010612A86E
-:10CE700097B0284DBDCCD247D37E8C3D51F3FEA652
-:10CE8000F80CCDFBF18E3C4DFD96F4219AF6B739A6
-:10CE90004B34F5DB8BC76BDA57B82A34F5BC9606F2
-:10CEA0004DFB82034DDAF7871DB40F05C7CACB507F
-:10CEB0009F77FADCF558DED8BAA1ACA78375F1EB01
-:10CEC00016FABDF5F87CD8C5DAA216D6D5BFCB9632
-:10CED000B8E93CC08CFBA2069D0F94F8881EDB0CC1
-:10CEE0004E47B01FF7D15EEE17709FDE5200EC0088
-:10CEF000EC91968E18DCAF31B31E5223715F3A1855
-:10CF0000F9BD1A4DFE5F0C43393F4325BDB7D1C86B
-:10CF1000487F6C9C9AED45DFDF51C5FFE25F914F82
-:10CF2000CD88207E3202345C5A379E812AB84F6EFB
-:10CF3000CDBA4BD862DD3EDDADA98FB1FF44D3FE43
-:10CF4000A6F8559AF7E31D0FE8F669A3A67E9BF3B2
-:10CF500051DD3E6DD6EDD3339AF7233EF7D7231933
-:10CF60008D6AF5A83698FFD0A31BCA705F861DF3A3
-:10CF7000CC407A296C71D7130BD957FB26962D60BC
-:10CF800057A13FEB8DBA782AF7D539C81FB5BF2E08
-:10CF90009DCA03754E7AFE765D3195EFD4B9A8FC33
-:10CFA0004BDD382A7D75E55436D43550FB5D754D23
-:10CFB00054020407A0BC888D11F207EA68E7B7198C
-:10CFC000FCD578E27AFAA96F884FB6F5F0B761FD23
-:10CFD0003EF68F8AD1503F9CC288BF59A14FA4C74B
-:10CFE0007329AECA14A85F48E6CFDBC3ACEB500E82
-:10CFF00034185C79A85FFFFBA9FF6C340E60ECFE6F
-:10D0000055E5F1F6285EB7409D361B0D33CF7F36D0
-:10D01000BA8633F61C8A8CA154AFC07A7B387F7FE6
-:10D02000E1A9FF907E2DCF9B2707CE9BFF9D1CE2A1
-:10D03000BCF9B9530E1BFA590E5D4CB3E1BA0E0997
-:10D04000BF928BE585CD86B2C498178672F1A84E43
-:10D050008F90E5A7D612534A1CCEDF3905F508CFCD
-:10D06000CD616C1BF08B890AB7473BF5C0142ECFFE
-:10D07000DB6F3393BD73D8E09A8F780E7CFA4984C6
-:10D0800057424ACF892857DA6D1D090887FE299132
-:10D09000BC1ED7F1A4E20CAA87F175C6A5D82676E6
-:10D0A000B3CEBE381FFD3A6F4811E70C2DAE0128F4
-:10D0B0007F65FD7085AB0AE5C4E112D7409CCFA126
-:10D0C0007233D18FA7DCE61D884CCEE82A9A12E491
-:10D0D0006F7934258CBE9B6CE274C6EE52BDDB4288
-:10D0E000D8692FA5707D9FF60DEDB93B23480F3F02
-:10D0F0006C608B768580E3BB295CCE9DE911DAFFFD
-:10D10000E213F02B9D64A3FEDA5784D3796F7B7909
-:10D110001AE941EDB50025A08FF653B56777D37BAB
-:10D12000B33C0AA373CD69824F3DD7BCFC1F47A017
-:10D13000FD272B229CC4C3ED83483EDD251ACF88F2
-:10D14000B190DE3263E28052944BD3C4F9D84C9B49
-:10D15000B1171D9319A34C76E8679E356F0D8AFFB2
-:10D1600005B115A628A82FEA7FF71A2C97A46C34CE
-:10D1700045435999F5FC1A541FAB80B48AC85EF236
-:10D18000FFB90EE6356BA5EAE0F693906BAEA5D736
-:10D19000148F21F110E188780AF025BBF03D016F72
-:10D1A000F9DD7B029EB352C4396D36CBBEA43DF788
-:10D1B000998B78D23AE3CFA9DDF8E7B5EF85DEF6B3
-:10D1C00081898FBBF4E9306FB03F498E7B48CCE357
-:10D1D000B089B914D4E3EEB2117EE44C3D7F5F1107
-:10D1E000AC3FA7D96EA0737BC9C77D8CFCF6459F69
-:10D1F000BB89CFDDD8EADF7E84119E37219D5C4953
-:10D200004E4DF2AC22F930E46B903FC8172FBA3F75
-:10D2100039427C7091E083B5C4BFF6D5ADA4FAFE67
-:10D220003A0F9507EAD6093EB881DEBF53B749F0F9
-:10D2300041AFE0834FD3F3E6BAA954BE56E7167C5C
-:10D24000909FAB4E14F8B432DEBD0EF9993CBF9CF2
-:10D250006C718721BCFEF8A899A9782ED16C263C68
-:10D26000050A78F2B1588C9731DBD73BBAC6CDE8C6
-:10D27000F96DE7FEEBCE7937C4BB1EC1F13AE3642A
-:10D28000503FBBA17BFC39C41C36E4273BB64E247F
-:10D29000FE71C8E1B0A1DEFA5CCAA489C8AF0FB9BB
-:10D2A0001CB630A8FF61EB24FEDEEDB099A1BE33C1
-:10D2B00065327FEF71D8C2A1DEB055D4BD8C0EB5FA
-:10D2C000776FBD93F84F0953F6213D9459124703E8
-:10D2D000BB06F958B20FE9E0A6F8D9A3910E525255
-:10D2E0001C840FE31DABF661FD96F4CDC618077ADA
-:10D2F00043F356E377A5B11546FC6E74FFBB57E3C5
-:10D30000776353361A83BF1B97F5FC6AACDFEADC00
-:10D310006C447D3005F9565CA01F5997EF257F4579
-:10D320003B01F134B7B99CF8784E5339F171099744
-:10D33000D2C915F7A39FAEA649B12B388FC94AE7CA
-:10D3400061BD023A44F545A016E0B3FBB6CE8B5E54
-:10D3500005DFD5607D28D57FB52A34DF3D981242A0
-:10D36000BE7C28E814E566057CF721D0CF2EA8679F
-:10D37000E0FAC87F38DB369BFA73DB50BEE6A67056
-:10D38000395920E4E65C512E12CF3FB5BADE47BAD8
-:10D39000FC3845D8635DE9FA1341B70BF83CBAD0C5
-:10D3A000B5F6BDA06BBF940F851D0958AF621BC8B1
-:10D3B0004F78A5F8AEC5C1F65B22C6493450FC854E
-:10D3C0003E4EA292F9787F0DBA380BE637D1796CD0
-:10D3D00053D073E247C2FEE8C1F9DE5464D6809FA1
-:10D3E000DF76CFCFFE8DF0BFCCBAB5EFC5BA17331D
-:10D3F0002FC5B5E9D7C1DC71445B4BAD87693FBB35
-:10D40000AEC71F7A3D5DD6C1ED7719C722FDF2A0E8
-:10D4100007D90616211FB431F4DF04F3892397E1FD
-:10D42000137A7EF45DF1B9CBF09BA48121F88D8C49
-:10D43000CFD297529F83BA07E3F33CAF85939FFE09
-:10D44000A4C39D8DFDB497767C6340FB2CD64F78AA
-:10D45000E6E9E776E273C5C4CFE9E1492AEEDB29C4
-:10D4600083E70FA8170DDFF624F19D36140E408FC9
-:10D47000855047BEE3ED5B3E18BF63E91C7FDA15BC
-:10D480002E1725DD833E48E588815C1E752D395DAC
-:10D49000C9B8C6F6CDDF26901FEB0AF8DE1D1CC604
-:10D4A000A8C3FD1EE4F7C511A4F2B42AAC4501FDE2
-:10D4B000AFB5A417E911AD034C462CBF6B3BB1755A
-:10D4C000402AF5AFB7175BFB145BF8B863C761D9A7
-:10D4D00064726F9A8D76D21033D949EF8A78C00979
-:10D4E000113C7EEA5D3C1F8676138E5F8C45F9A564
-:10D4F000B7375B0F4E2F75E474B53B619DA3719DEB
-:10D50000959F19EEC767D76A8756AEFC86196340A8
-:10D510006EAFBCC88C055763973215D945FE51E7ED
-:10D520009B58167DEE8BCE71A0FD29F507619F5E9D
-:10D53000210EA9B883EB0BA32EB2746321FA997A5A
-:10D54000D0F98D52FC276EB78A529E8B0CE7536040
-:10D55000330D56AF29491387146F8472BAEA1F8CB2
-:10D56000F536E6A37312BD3DFB96F043815DFB0BE0
-:10D57000C4DB35223E09762406F177CC4F3F9AF979
-:10D5800033E203E1A40F75DAB5BB0D145FD0687404
-:10D59000F51C8176EDCA81CE5550FFD417F7EB57B5
-:10D5A000A1ACB17F437093F45BB9F23CC153D65B3D
-:10D5B00085DF774318C81F282BFFA3921CAA646C31
-:10D5C0001DED1B7BC3B42C482EB286AF3AE19F0BF6
-:10D5D0007CAF02014876D6C8492E685721EC0FE689
-:10D5E000799DD785DD0516C52417F45B1127DAB3BD
-:10D5F00087F9FB01F2FD23FCFD40D9DFF989F4BE78
-:10D600008FAC8BFE3264FD4FBC9E28C76BE5F56C7A
-:10D61000590FE7FDD978FB9706364CF26405F8FD03
-:10D620009E81423EE6B13C1197B377E0E5E351B409
-:10D63000EF857C98F58CEA31E5E2FE8C8FF833D2E9
-:10D64000778342B17395F78691BFFB4C7443CEF25A
-:10D65000207B45C6AF9497D95CA8FF55BD98B645C9
-:10D6600015F13CA87FFCCBC1ED9831AA95CE27CE11
-:10D670003DC8F97E77FADB8295AF6AF6B3CB7B556E
-:10D68000E1F6381EDCC178671FEABD99EC8B141FE8
-:10D690009D9B7F2AF85D2FE0ADC5D18178B1D8641C
-:10D6A000E6427B35F625E0CFB8C79FFB881F2F7871
-:10D6B00089FB7FAB1E7D93E4DE1CD541FEDCB159B6
-:10D6C000EE2F106FDB6C3EF22B2E58F91ACDEB9B30
-:10D6D0000CA137D83BB282E179B62BFCBFBA02FC71
-:10D6E000BFFA21E1AFF73B2FB1EEA3F52EB9C6B8D3
-:10D6F000B6361B3F17758A7D3A6E700C16F08A4855
-:10D7000045FFF97C5F6A948A41C7BE5E3C5EE99D35
-:10D7100022B48BCED5DA18EEFBF4E57FCB7187F01F
-:10D72000FBEAED811938665C005E7D52851E14802F
-:10D73000EF001CEF32F0D5BEFF9EE1DBDBE83739AE
-:10D74000F11CF528A37E06FB8E9B82E36246A47241
-:10D75000BCECD9C4CF8DF4F15E23526DDCEF2DCE3D
-:10D7600067AA26BE331CCF67243D8C8A600DE86F04
-:10D7700007BC760ABC76225E4BFC0D9CD3C0772199
-:10D78000E82B80BF5AB88E4EED82B7E3AE00D7715A
-:10D790003F245C1B411FA673CDDDE1E44FD1C3796B
-:10D7A000A980AB84F7BD5780F3BDDF139CEF4D75A7
-:10D7B00068FC1112DEDDC927FDFEC87987A0D3A25F
-:10D7C000EBA1D34B69DC4E64463FC599EAF7BDBE79
-:10D7D0002B3DADBDC2BEAFFD21F75D0F377D592991
-:10D7E000CE3BF5CFB7A576CBEFBE1338FE6FF3A7D0
-:10D7F000CFA8DDAB793F6BE541CDFBD99EF734F582
-:10D80000E17E5F19A2B9F48F8F3CD5F126D6AFD750
-:10D81000CFDE9D7F7DC20B0B0D78FE56ECE3FEFD47
-:10D8200005E9EE7FA5029CDF3578EB6D00D71B8FF5
-:10D8300035A8741EE6CDA373C0E5628EE787FFF3BB
-:10D84000939F01DE9C6766F27FB6ECCD303AB2BBA7
-:10D85000E241C90595B982F4C4124B9411F5A9129D
-:10D86000D09443E1CD258137140F04F43ED5C2C2D4
-:10D870006281CEA74E5528FE692AE3F1D450B6B88E
-:10D88000E1FD04236B3143BDC26A6C31D3B91FCFB4
-:10D890007798C2A7C9CC46E6C1F72C3686ECE0C91A
-:10D8A000F810E6ABBA548A679B52CCCF0BEFB23676
-:10D8B00084A13CBDF3C07D677F06EFD96A4F118F0D
-:10D8C000D796F96B1F1BAEE51CF0522AA7F37645DD
-:10D8D0009C2B2B614E8C6FD57FF77E2AF7974E508D
-:10D8E00057A918FFD2F11E23BD5BD21DACEF8039C2
-:10D8F0009FE7670CC575B2B096B448D49F37966160
-:10D90000FBCAC30E824B4DF1AA1CDCC79AD1CA6771
-:10D91000E69C807D53B3F26BD2D3C7A83BEAB1FD3E
-:10D92000B9A3DC357E63AB47457B25E0BFF4CF442C
-:10D93000BABC921D24E77DACAE85F0E993BA0354DE
-:10D94000BE3BF24F45A867F8EB7C21FD97D7EB2F44
-:10D95000907E02E937907CE0D37BCB7A235E66A48D
-:10D96000093DD0A2F443BEC08CBC94FC3237AD8BD1
-:10D970005C2D48BBBC3EA87DFF3DF3D7ABC5F3CAC9
-:10D98000782E17F5F8ADC76B89CFF0599102E3DE19
-:10D9900005FA1ECAD569CC935D097C76EAC20D6191
-:10D9A000C394EBC7EB25D6CF1358883C956BE7E7BC
-:10D9B0000EDA47B54C25FB40C62BC87D5890D6459E
-:10D9C0002E2EB9C2BE2DF921F7ADAB5CFB7CE6F57E
-:10D9D000C935A6C9EBB8BF2BBE3E9076797D40FB1A
-:10D9E000FE7B5E7750FECC4CD510C817C178628C98
-:10D9F0006B6CF7F27CC845891B222938B3B8231217
-:10DA0000F5C6C57B54C243667419FB00BE2E14F8DC
-:10DA1000DACA5A3E407C5C387C21E5D12D7A3C74D0
-:10DA20005C71B568BFC4DA68C2752ED9AA6D572D6E
-:10DA3000E28A2B7768FDA2D5C36F3A89FD56EBE2E7
-:10DA40007976A689F8E17C96CFE32EB4FAA9BE6C6C
-:10DA5000AB631A7F65DBC53AF207BCF4BBD6873DE2
-:10DA6000FD83ECFFAE78BBF70AFBB7F787DC3F3DE1
-:10DA7000DEAAB6AD945775AD78FBD341AE0F70DE1C
-:10DA8000921F4F47DE04E34E7FD5ECF5E0F9689135
-:10DA900083FB37156F3D9EB7B57FCBC87F3447F802
-:10DAA00039BBCB4B97F106430E7BEB79BC814BC561
-:10DAB0003CD1C107CACBF0B8A2E09D5AD247BA3DCB
-:10DAC000B792F955227EE86AF99AF4EB0D3E554B70
-:10DAD0007A96D367277D68E8858637513E7E57FE64
-:10DAE0006E290F736338DC0AFDE5A4E7B585B5142C
-:10DAF0007D887AC2CBE121F5841EE95C4F98E499D8
-:10DB00001DC6F30DBB9C07F648C7F340C1FF0D16B9
-:10DB10005718C2698CDAFAEB3B107F7C2AF9F7566A
-:10DB2000FCFCFD3F3CE6B8B2DD5F633F4F7A4377D4
-:10DB3000FA7F8D81E75DE4973928CE0FED29F4EF68
-:10DB4000497F9FBE7DF1A0D2FEE971E4AFF6B970C6
-:10DB50003E9BF87CBADB9F9A955F69FC8BDD8D5FFD
-:10DB6000B3A7C83E27880E66A42B12CFED272C81C1
-:10DB7000FDBD5A3C18D13155A3FFFCFF6E574C50E8
-:10DB800041B504F999AD78B9FECAB81E3B9DF9A814
-:10DB90009CC93AA874331E7F3F8739A99C27F29805
-:10DBA000DFCE7057A4533C4C472F8A9F7CF17FB245
-:10DBB000106FCE8E1CB60163EDBE2F3DAE3DCF4142
-:10DBC000E3B7EFFE9F048C83B9125FD810EF9A97EA
-:10DBD0001EE23CE82F252A9DB7B0538F919CA810D8
-:10DBE000B730B0D1FC1CED5F8E44A29B005FECBD52
-:10DBF00059F2453C9FCDFECCC0E349162BDE81D0C7
-:10DC0000B4C96F20D2CA9E9FE855B1DEC8DF6757FE
-:10DC1000457915A8670F09E7EFEF8EF2A21F7D0681
-:10DC2000F3133DCE628CF8DD6CC6F9DE5CE6E2F9FA
-:10DC30000EAC2309F5B0F9CD161EEFCFFC29C8DFD5
-:10DC400073BAB17F5A049DE726717E9E5BAAF55395
-:10DC5000AC49E77CFC6446E967484F67D25D6BB12D
-:10DC6000CC8DF6AD7FB890FCF60CED8793437E42E9
-:10DC7000E78DF2BBC841A50F62BB9D0A8F4FF7EC41
-:10DC800031537C047CD1AB3C28AEFFED8CB25F619C
-:10DC9000BB4711F645DDC315BED3E4CD06E8C9C3C5
-:10DCA000E78F3617F9DFE141318D4BF5DF3F3D61FD
-:10DCB000F26A2BF9F83DA8F7460E723F85FB9A6B86
-:10DCC00062CC8AF37FC2ECDD42FA696D02FA2B174F
-:10DCD0003E6936A0DEF011885BCC43F96B9D85CAA6
-:10DCE000BF811D8CE5A7600763F919D8C158FE1DD7
-:10DCF000EC602CE75FC80361C1D8D80C5733C7EF7D
-:10DD0000D0F959BB053C3BC7DF63A2F14F66B809A8
-:10DD1000BE9DFBFD32F3E2A1CECEA88EBED197C14F
-:10DD2000B7EEF98C47D883A1E3B99E15F3C86934DF
-:10DD3000927CCF69F2472E086AF776BA89DE67EFE0
-:10DD4000FE9CF24FDBEC9DF07529B0E409065E7F86
-:10DD5000FBE979935767E1FC5D9FE1BA81BEFF82E1
-:10DD6000654ED3FBBFC2FC1FE89FE20EDA958EDF43
-:10DD7000901DA05B871E0E725D3BA37CEBF1FB9DAB
-:10DD8000BB937025C06F18A71BC42325D47A57D125
-:10DD90007C6F377714625ECBED97D49071C62733D2
-:10DDA0004A08CE3F97F826E124F6EB7AE9BAF3FC6D
-:10DDB0005BE02993F77720EF74A01CBA1889FA5E0C
-:10DDC0008538DF6F6A4C7917D7E739A0B2810EC268
-:10DDD0005F0DDDC566F0FD9165F61E5339EED3CEBD
-:10DDE0003D2752E659695F52E6437B63C6408DFF8B
-:10DDF000317BC8B7FFFD702CB5B7E35077B2CD6368
-:10DE000030FE649A65EF1F714933EC9F8DC1F89322
-:10DE100059F1CA7E2C673B12C762DC898C8F9F9BAD
-:10DE20005EB21F49E9566705E96925C85C82E4418D
-:10DE30009925020F053BEB63EC319AFA4DF1FD3465
-:10DE4000EDC73B9235EF6F49CFD4BC97E3DEEA2CA8
-:10DE5000D0B4CB8DEE4842FB0CD641F4C0B6A91429
-:10DE6000A797BDFBF0CD99509FB07D8A13D5929DA9
-:10DE7000E2FD845D655EDC8F7680A70914A853C53A
-:10DE80000FFCE661EC4CA7FF57EE796ABFCB710D32
-:10DE9000FA7F377ABFE4B34B9B2D45C867AFD60EE8
-:10DEA000D0EF4F7E86D62EE80E6F3AE9427170BCF5
-:10DEB00039A8B26D21F0062352391EF272C2219E9A
-:10DEC0003F76ADFCEC0BE4673101FAE82C757EB9C6
-:10DED0005C93F3DDE5E8A7FFB3CA281F4FE4F52DF7
-:10DEE000C0DFD500BEB3799BEFEF134BCF3DA8E762
-:10DEF000627EA90BFA5F9221F4A7CABDF7F7290C3D
-:10DF0000BC672B3ED3B467F72A6B34F5D589DAFAB0
-:10DF100083256B82BFEF8E2F2ED834DBE4A6FC4F17
-:10DF2000C5E50DC11FE47CC6BC114E717DB761BC57
-:10DF30000A3CAA2E7CCF88E7B0B775234725FFB9E6
-:10DF40005365B5A1DEDF93C1FDFCB7BE114E713044
-:10DF5000D7DAEF47004B8A337C89CBD18F7AFA8CA2
-:10DF6000C1FBEE11FD9F2DDAF8F36FF07CF46546EE
-:10DF7000719F67A338FFCF693C6930A01CECC1F1E9
-:10DF800025C7EE37A05C695F14E1C1B8FE9AC536BB
-:10DF90008A07CD4DEAF8C0025BBFEE99038F5800A7
-:10DFA000DF3EC624C820B9DA8E4611D437661C205D
-:10DFB000B97ACB1BE12D86EB58CF463C97403958B8
-:10DFC000CAE97C26E28D902FE863AFB99F75CA1B22
-:10DFD000E40BB87EAC1F78E64F871F8179D71CE42D
-:10DFE000748E11767AFB7E5A907DCF1EE77469811C
-:10DFF0001F1EA7A4A3EF7D1B4CD6CBD27903C5DD92
-:10E000005C2D7DEF407A8EB82C3D1FBA05F6A7E651
-:10E01000657E9FC5B9E6819417DB9D3CAFD9A412FC
-:10E020001DCA7A5BB33A0EF1569F7F2EE1CA5C4E51
-:10E03000A24F796FD4B211FF9C887273D91E230F3F
-:10E0400012E96E9C752A73048DB3F335F322CA73FB
-:10E0500013F36F97F27ACF3FA24BB278B92A84DCE0
-:10E0600003391D168B72BA4221BBF2C89EDEA50889
-:10E07000A7230A6B7150DE168F539EC4BBC3E756AD
-:10E08000BAAF243E9DE293A57D29EDCA297BA60C5B
-:10E0900044BDF283C6394760E7D8A719C984E7773A
-:10E0A000300FE9C147A2CA07A05F6282880F381209
-:10E0B000D5D18A7CF9C8880805CFFBA1FFD5D8BF88
-:10E0C0005CD791B0F201FCDE0919973CE8BAEE8901
-:10E0D0001BA3DE5B720B9E6F4F6776B42B6F57B935
-:10E0E0009ECB5EE7F429F95E8DE28BC679BE9D3149
-:10E0F000F1AB0C3C2F5EF90BE157157033F238C4CD
-:10E10000ABD5733BEDD9A7157E1F8A93EBFFD5C323
-:10E11000CFFCFA0ECC9303BB5B81F9CC69DA4BF7E9
-:10E12000FEE8EDEC4E7BE7FFD19FDAD55E2A8F1833
-:10E130005414F093EBEDA64E3D5DEA7BDB789CFC3E
-:10E140009B237EDBB614EA2BB645101C4F3F69F6C5
-:10E15000201F3FBDC54CF6CFE9E88E63CBB1BE2B87
-:10E16000DBE9A1D19C9A7BD1161A1C1FA2FC616F1E
-:10E1700087D17D1E279F30B7E0F9EEE2A732B6A027
-:10E180003D757280E3D91DE80F7C368EEE19606E06
-:10E19000FEFD6D821E91BE1CA07AA8BFB3911EB178
-:10E1A000F8853EC4C7E4FE9D7A229CF2E84F1F9892
-:10E1B000D413FD65AD86E7298F87A9560FF2E3A535
-:10E1C0005BC2490F5C697767E3FACB7E77DB1D059D
-:10E1D00038FEFB710CD7D3DEFC02F92B03FB1B5A74
-:10E1E000BE9F6B4EE67CA053DEF2B8DB5918779BDE
-:10E1F0004C71B70583E2305E55DEBBC8E36EF35564
-:10E20000C54579070F85CE231F3D489CAB4AFF4982
-:10E210000CB3C4231DBA19ADB7FDA1B42D68EF4CE2
-:10E220001F24F29F5987C89794F876ACFA55F29F4D
-:10E230009879BC5F78E873ECF2413CAF7881E56B8C
-:10E240008DFFA67AE5B71ABF4A751623B99B5FEF13
-:10E2500028B81BCAE502CE5549E593107E4B1A3605
-:10E26000BEF80EC1E5F11F7F8CE31EB092DF86BDC4
-:10E27000C3E1A7B7671658BE12F4B459A3079F7835
-:10E28000F4438A3739B13B3307F76D8EEA3B81F7A8
-:10E2900071B5D97C9FFC0CCA5D070ED1BEE8E7DBE7
-:10E2A000E5DC5EE17CA512D71183F12EE58B07D169
-:10E2B000B930A7F7E3EBB3097ED29FDB7E3AB4BD5A
-:10E2C00025E729FB97F393FDCB76FF25F6EBACC949
-:10E2D0009783F2B97FBA4393877D36D2971365C58A
-:10E2E000E7FC1CEA6C34D483F0E6FB3ADFB94BF868
-:10E2F000798E1A56DD6302FC6B6D7838CC1DCC47E5
-:10E30000AFF15C47CE57C695CA3CDA4D83843F7B5C
-:10E31000001BD04DFEEDE38827955DF36FE979771B
-:10E32000F9B79DF9B6FFE0F9B632BFB6B0CC501BD5
-:10E330009C672BF96161263CCFC2737FAD7C2FCCEB
-:10E34000D5B6EF8E3F0ECEE47E95C298D0F9AE7F63
-:10E350001EC4DFD7B3167EFFA0908BC304DCE5BDDF
-:10E360005F524FA9167C5BE6790E6BE6719BC34446
-:10E37000DE0E7001CA73ED72BF5B7C26C955793F12
-:10E380009F027D4D8F0E952FECA3798C641D54BA9E
-:10E3900098DD8825809FCAD1AC9CCAB1AC96CA7161
-:10E3A0006C039537B3062A6F653E2AD9A01611EF84
-:10E3B000792FCF331DBFD080F2B5F08ED07A71FBAC
-:10E3C00015E1E0A1FB03AF150E6319BFE7AF0B3CEE
-:10E3D000FAA7137EEBE1A1CFD71CC1FC7471C92849
-:10E3E00044DC64B4831D14DF5AC65C541F739570FB
-:10E3F00028F6BB8D3CBF57078FB2D0787141C06300
-:10E4000015CACEA2C03E65673AE8B9DC2F30C4E237
-:10E4100091FFEBF7513E2F8C283DEFB0E37D30AB01
-:10E42000A6501E7741E9F264A8A766FE6A0AE5795C
-:10E430000F2B7D01F3BCD39F7D98BFCF2D2D08738B
-:10E44000C2B8AB1E9982F98C6E1137ED16F1D2CCA1
-:10E450009DA7B91FCBBDEA1EBA6FCC3DC0EAC475FB
-:10E46000CABC7035999FAFEEB1BB7B66C27C13C648
-:10E47000F9D6704897F69E0A74DCEA0B6318EFBF72
-:10E48000D6C4DBCBFB6CE4FAE43D37BB76652E5794
-:10E4900092AE3C0F1867008EE35E3590F2E3DCBB72
-:10E4A00015E7E5C60B4F722765A2DE8549F14017D7
-:10E4B000FD841C6EDD959989FB949D29E27E621393
-:10E4C0000B108ED392CAB3B17F99179D2DF6A5BBC1
-:10E4D000724AA62B13DBEB9FCBBCEC9199EE3C1C54
-:10E4E000BF26E222E59BB5E5BDBFC69FD8354FBD2F
-:10E4F000DEC5BC26E22BDAFCF4F6F926BACFA9B0C9
-:10E50000DC5D8F21CA374EEF188CFA31F43B1CC703
-:10E51000AD31F913F2548C42E6F9EFFA7CEF3DAFDE
-:10E520001DD4E4B74B3AEBCC6F3FC7F3DB03F4F5F4
-:10E53000E8721694DF2EE946D2DD50CC6F8FC47A94
-:10E54000C67C6C37E2FD6394DF3EEA985FE4B77FF8
-:10E55000A8CD6F77FDF3BAF2DB4F8AFBDE4E5AF897
-:10E560007D49F23EA965BBF9F9EF3285DF27B5ECAD
-:10E57000397E9F94B40B1789F5551DDCB606CFF98B
-:10E58000163D3E97EEA362E21E5407FC04DB85F2C3
-:10E590005E527D1E4C0DDA83A437B790DEA5CF877F
-:10E5A000A979BC8CECC11A9D1E5D9D29EC4121CF3F
-:10E5B00098D0FF168A6F711D56B2CF4CA4772E7B70
-:10E5C00062B9D38E7541576CC70E3A7793EDD9E394
-:10E5D00031840B92CE16AF53487F95F0CBDD6E762B
-:10E5E000D13DC6DB7B93DE0AFAB6C863F6727B1BAD
-:10E5F0007005E3E177467524A19EBC734FBA1338CA
-:10E600002C7BA5DBFBA777E8EE9F7E4A73FFF439EE
-:10E61000FC0FF5B453062FF63398A5FF12EF252E05
-:10E620003A65747A1D81FB98AF74EFB084BF59ECE2
-:10E63000D7B5DE43ACBFEF59E63FE8EF235E2BEEE4
-:10E64000231ED1CD7DC466B55925FDE16BA3E65EE1
-:10E65000E21BC53A8B1DCC8BF7FC0E6D356AF6BFFD
-:10E66000D8BF81A13E147ED8A8F123981DDA7A8301
-:10E67000C40771BF4857785B3BE1692678A6D03D57
-:10E68000CF45BA7B9E259C3AEF79EE6F25BC1F7A69
-:10E69000F00515F9C1B5DEF7FD43DFEF7DA5FBBC45
-:10E6A000F5F774EBEFE5EEEE9E6FB9EF792DCB3415
-:10E6B000EDF5FB5E70E0A7DA7BA8C57E7BE0E7BBEB
-:10E6C000DCEFB64CE1DF15FBFD355E800674F89794
-:10E6D000C8530F22594E88E07CADD3AE1F1E46763C
-:10E6E000D6BB8E98321BD2BF9053E5424E8115C7E0
-:10E6F000EB025F9C3E1E47907F94DF5F51E8E7F19D
-:10E7000004834F85CE0FBABD58D19CEF76BDB79824
-:10E71000E7190FBBC8E3F4F4E7FE326FA8C215AEE9
-:10E72000BDBFA19B3C22E9C7013D9E99508F37F0A8
-:10E73000FBEC42DC73BC494D0ECE2372937F67B273
-:10E74000C59780F86C4B74C7671505F28D46615EFE
-:10E750009142F6A0104A513FC238CF764CB2ED8BB1
-:10E76000F9A3913FC23C1998BEDD3F989BBBF86F5F
-:10E7700060963B310BE4C971C5BEA600BEFDCBD08F
-:10E780003309289FCC78AE9D4FE7BEC9F85E7F3F26
-:10E79000BFDFE020FDC2F35385EC8733D8D990204A
-:10E7A0007A5D1726F21A757FBF40D853F2EF171C17
-:10E7B000872E1601DF9ED1C4F3A897C6B70A3B8CFB
-:10E7C000DFDF3AB7BF95EE7F62AE0227B7C3A57D04
-:10E7D000D54FBD16B979A5F8A2A5F1A735762EDBE0
-:10E7E000117355E7898175F3FE8F3F1041F2E6F80A
-:10E7F0000303C8CF17E8BF8DECFE19B5DA38E3592B
-:10E800002B3FD2E0DF6CCF679AF7FED88EB07EB098
-:10E810007EFF8B7DC64E03F89DDD6D1E8C7406FB5E
-:10E8200036352BC80EF63F94369AEB01575AE71946
-:10E830009AC73111272AD7F949DD51AAFBEBFCBA57
-:10E84000781E8FC62E95A5E90D46F7E474283D9CE9
-:10E85000A1FC2C9F6671BDFD98C8833C26F2208FD9
-:10E8600089BCC563224FF198C85394F9A3C714E635
-:10E87000C2788AE94AF993B315CA1FBD07F1AF669A
-:10E8800049470EE6DBD5E4FA672A2AE58FAEC4F5E0
-:10E8900087C81FCDC1BCF75D5977FE08F5F8533D19
-:10E8A0003C742FC9EF774CE67513A78F57B246110A
-:10E8B0003D78FBBAEFC37EBE50D416C2E797153A37
-:10E8C0004F652EBF69E265F24B1FC8E2E70BEB759F
-:10E8D000E5D62CCECF5E11E518F5C154CAFBD9643C
-:10E8E000A6BC1F18C765083AFFD7E767E5BF6E6E7D
-:10E8F00041BE21FD304F6425F273CF64EE5F89FD88
-:10E90000A599E76DF97D0998E785F13E786F063B9B
-:10E91000CC5C3C0F8CDFDF27F7E109B10F74917EEF
-:10E9200061204FACEAE0F14F908F8CCD726FC6F54D
-:10E93000CBFCA5AAC8BD1437F1429683BE83F9D299
-:10E94000FA811FAC5608CE5DFC70CFE0FEE8F3DF25
-:10E95000BB5BFFD9F9BEDF642506F2A782F2A65E93
-:10E96000C079C875CB7904FAB93C5E4B7F52C0DFE1
-:10E97000B53615E944DE4F9BAF2AB32686F8FE0371
-:10E98000B16F5549E57B711D4B6AB9BFADD31E57B9
-:10E9900036FCF863DCAF8356E273DD7DAF5F67D58D
-:10E9A0006B07091EB0CE99B8BEA075BE9B15E417C3
-:10E9B0003CBBE7C3DF20A8AF777DD79AC76CEEC119
-:10E9C000EF43ECEA8F860D0DD2A3CCF2FBFEDA7B8F
-:10E9D000C6CCF8F71060BC46617F340AFBA3294C13
-:10E9E000FCBD1A9D3DDAE8E3F13C8DF1268AD76142
-:10E9F000E2EF2B48F9BBE23D1EDFB32291D17B9CB5
-:10EA00001FD281E2DF4FF2A0F3BE2805E41CE0C371
-:10EA100019BBFB02C28FB997937C506FB03A119F1C
-:10EA200077BD7DB3B0ABB8BC2912F2A508FBC175A8
-:10EA300064F524B95328C61D6CA925BD7608F308D2
-:10EA40003F8BF0473CB05F638FFD5F0DF62D3910B3
-:10EA500068000000000000001F8B0800000000009C
-:10EA6000000BFB51CFC0F0038AD7983330385A31AE
-:10EA700030E45933305C07E2307384DC4B71049B23
-:10EA80009AF8A73C65FA374832306C02E22D40BC58
-:10EA90004D9274FDB7B410ECBDAA0C0CB781FC6E9E
-:10EAA00020FD5D9D816117907D07882F83F840CC04
-:10EAB000ACC6C0200EE4AB00693F20D607E2BB40E5
-:10EAC0007E9A1A6EF3EF69E1B77F9B062AFF1D1A43
-:10EAD000FF923A7EFD999AF8E5DF1190C7861FDB19
-:10EAE000911F1FEAF6B44927B4C207D0D2F54E13DE
-:10EAF00006860BA60C0C22D0B4BF17495E0D28B6B3
-:10EB0000CB04C29EAB074C7B66403E8E7C310F2807
-:10EB1000BF11286F648EDF7E056654BE002FA69A53
-:10EB20006F4C08F6042154B9C3C298EAB9441918C5
-:10EB30000065838486D80300000000000000000008
-:10EB40001F8B080000000000000BE57D0D7854D5F8
-:10EB5000B5F63E73CE9C99644E269310C240024E89
-:10EB60007ED0A8098E1030261372263F242401C3BC
-:10EB70004F695A699DA045DA8222DA5E6F2F5F19CC
-:10EB80007E1A2245C516ADDADEDE812A4FDBEB7335
-:10EB90009F60A9E586442610100D3F11ADDE7EB6BC
-:10EBA000DF8DDA8BA10D38C160E9F760F9F65A7B89
-:10EBB000EFCC9C939904D4EFDEEF071F9F9373CEA5
-:10EBC0003E7BAFBDF65A6BBF6BEDB5F758C944E25B
-:10EBD000AA20E40AFCA357DF6442E8A391AB785E65
-:10EBE000692741C72D84A4D9F7F6CEC820649E2694
-:10EBF0007B6B3D844CB2B7F4906242CA89CD63CB43
-:10EC000021A45BFA4DEF0C7A7F34C5EAB511F8F711
-:10EC1000002173085967A77FD2F2472FD22BFDFE40
-:10EC2000E85F2D2122115223371209BEB74BBCBC1D
-:10EC3000AE2DC824A49AB07F732F926A5A8C54BB0D
-:10EC4000EF6D243308A972D15276F6EE0A2B4F08E5
-:10EC50002D5F4658FDBADDF8BE8C6C1F929D701773
-:10EC6000919B8A687D9755E37B77ED07C409E56240
-:10EC70009E433FE00FCA83EB494AC61907FDFB36A6
-:10EC800072DB15995E950984DC1EE58BF94A481004
-:10EC9000F9D6C1BF5748D30CB827E4456C3F5DF0A7
-:10ECA000B1AE9FB869BF334A88B7967670529DDE81
-:10ECB0000D7C29AB563D367ADF5D336772BF46C89F
-:10ECC0000FCFB5679142FA796835F23183F3B1FB22
-:10ECD000DC4BEFDC47BFF7D511AF8DDE1FB07A27D5
-:10ECE00037158EA6C757979E44683D4F341D7260F6
-:10ECF0003D84FCED4A26AF278F90CEA6DCD4409C05
-:10ED0000EFC4F5F10D2E426CD1FB1D3AA96BD7462D
-:10ED1000977B0906733654BF1CE92CE3BCFCA14465
-:10ED20009ADBB1DD661CA7039CFE1EFD90A3BF10FD
-:10ED3000DE871D16DA8FE090853C4FABE81CAC4CAB
-:10ED4000067A37E996303CEF1C5443C00FE26ECF91
-:10ED50005A54349AFE03432B6662BF02AB0DEDFE9C
-:10ED60006090F65783FEBDE89847EBB9306871C9EB
-:10ED7000745C9FE0CF0F04DA1D2EF86E201DC7F3E0
-:10ED8000F10DF4EF1B12F3E3F1B9DFC80D6850CEBB
-:10ED90006EE4C7E085637974DC3A772A5EE8D77859
-:10EDA000FCFC016F47DCA77BC3552E5AAF2FE295C1
-:10EDB000408FD207099990037AD179D809E3DB48CB
-:10EDC000502F7C4D9549D3593FBCB207DE1F974168
-:10EDD0003E7CAE30F663841EA0EF06A0D38DD7A78D
-:10EDE000797B4FC13862FF36255D4FE9BD50A26087
-:10EDF0003DBBF54D7E05EBBB1C96411E573379CAD2
-:10EE0000F004365A81FFF7106FD003F512ECF74F7C
-:10EE100079FF7FC2EB13ED740EA6FB15A0AF9978B6
-:10EE2000414D6AE4F5DDF0BD6F15A37FDAC36B25B4
-:10EE3000E0DF75EBFBF11AE274EE80EF6981ECB56F
-:10EE40001109F836F5A1305E776EFC7D37D097BAA0
-:10EE50008524812D78A2DA9206DF3D316F4A12BCFB
-:10EE6000773651C5A7F6C0E7753DD043FBB3B35A1B
-:10EE7000413A770E52FED372CEA0CB0B7AED0C7ACC
-:10EE8000F8D5EB85F207393F0EF076BB381DCEA0E2
-:10EE9000CECBAD2D8472CE6010AF21DE4FE2598310
-:10EEA00072B78ECBDD416BE026E07BC6207113AAE2
-:10EEB000CF07CED74F867645FDE6F27B9EFD9FB30A
-:10EEC000E0FDC441F2AE75065CC32DD0DE0DD00F5F
-:10EED00027DCF7B54868A742A847FA650B2105511A
-:10EEE0003B9571A969FE1D1EB8AB413D1276A06C21
-:10EEF00050B548A9B17A568D7AB093EB41F56018B8
-:10EF0000E584EAD9610BE553F01CD5332A5F079AF3
-:10EF10002C38DECF4554B4C3A4209CB52865B41E5C
-:10EF2000750EAD9C09FC16FA34DA7EFCBFA15F3B7E
-:10EF3000693F0271EC9A684FE89BF9FDB8FAE60A5E
-:10EF4000A2BE75527D0B023F9B2C49F9A07F6D1626
-:10EF5000D41377757B37D397D5A86F19F7307A26F6
-:10EF60002D0FA11E8CA7773B3D2EBF02F537333DF9
-:10EF7000ED1C7C6FA30DC66339E176E27237DCFBD2
-:10EF80001E667A6DD633B31EA6FAFA503F73B644A6
-:10EF9000085C3D9B1B51AE692B49A87F09F4B01357
-:10EFA000F4B0F8FF1F3DAC82799CEA5D9A766B8FD6
-:10EFB0008BF67B7E84303CA43DD103F3784DB68D37
-:10EFC000CDE353DFBEF37E7A7FCCEA40FE1F9B4841
-:10EFD0001F16C3BD8C7AD79DB3357B1D7D3F3F4344
-:10EFE000C2F784AC42FDAE1578091E51FDF1F74B16
-:10EFF000644E3A947B7F4715FDFED501E28557AFFD
-:10F0000066CB58DFE141C2F498EB672DEFEF61FE6C
-:10F01000FEC2251202FDAC0048429F7F7C3632CDF5
-:10F020004E5F7D68B95C4472E97C2CF8C571460D71
-:10F03000D7FF5733641DECC6E1F529219283F5858E
-:10F0400041DE5E7DD81692697B17F2F35E0813C02D
-:10F050007F91EBD7D1F73DAE8F5262F57380CBEF46
-:10F060009FB8FC0E723CB1E3E6A64512E5EFABF9A2
-:10F0700079A85F17F23F9A4628ABEFCFFBCB19B8C0
-:10F080001212B6025E32D723BE7FD51DF8B244718C
-:10F09000D540E87D278CE7B97D1FCD802B714F408F
-:10F0A000DC351E3EF3091C16E9DB0C388454533959
-:10F0B000991395934991BEC3C037DF30C363A46EE3
-:10F0C0000D8E4BB98BF1A5FBE25B59F05D07E75B59
-:10F0D000D7505F16DAC73A633D5DD6FEE54DAC7E8C
-:10F0E000FCDEE762E32AE87999F7EB6949220C270D
-:10F0F000B2F1F3F1EFE72A7D136EA174CC3D267BCC
-:10F1000037D2477307FAAB491C3BB45B4A4379AD2E
-:10F11000B86494D7AE8B4765E00BA557067ACB232E
-:10F120007D32B3E34CCE7C5CCECA23A70DF65DB432
-:10F13000DF1539DD00ED5F1860F62A115F85FC1CD4
-:10F14000E2E3FCB2D0571272DC42E5E508A57FDBB2
-:10F1500018DFD7B86403DD42FFAAEC0E035EAFB838
-:10F16000946EC2FF467A4B9530F2AB14F8E549CC69
-:10F17000AFF5523AD65F36F0E9F865B62BA2DE2E2F
-:10F18000E063E168BA0808B5A05BFE3F9FAF9DF061
-:10F1900007F35F8E829E92FEBD72530ACC271ADA65
-:10F1A00093B26A89E172DECF46F896365527F4CAE3
-:10F1B00023A19F57EF9342B58037BC3F433FF142B5
-:10F1C000B1CD03766892E709A53F46DEEAF9F72359
-:10F1D0007CDCA0633FBB67BF9D05E5BAA66FCC860C
-:10F1E0007198EF79DBB18EF2FF28D79B8E0D7558A1
-:10F1F000AEEC1279F45618977CA66773795F7A386B
-:10F20000DF0E71BB7190CF9B6F6D08E0F5CD0DAB3C
-:10F21000F07A7AC35ABCBE7AE9450DC6AFB7200F63
-:10F22000E7AF3AA55D89E757950E1AE5E6650FC584
-:10F230003BB47CC3E08AEDB7D27E1FBF6441FB7C48
-:10F24000BC206F4CBC22EC8728F78AFB6755C0B7FF
-:10F25000C6014A6ECEE8F266792D23523BE0BF32FA
-:10F26000EFEB0AA1F67241F12E2D16C71C38975903
-:10F2700004F51E90FEB0649627311D65BE3EECE796
-:10F2800082F0EF144F4AE2722794BEC659E8A732C3
-:10F29000FD2AF3BE5BADD3F66A0B7735A25C0C2B6F
-:10F2A00016908BC6C2BD7C7C5D381E0BC47C562C70
-:10F2B000D785809EC10B48676FA13C11E8DB669142
-:10F2C000512E17786C886713B63FAC9030E89712D0
-:10F2D000C6713A4EEB01B93841ED1E7BDEC7EE69CF
-:10F2E000BDF0BE3BC7A679819F6E118F5865908F88
-:10F2F000C6FC59C7BD94EE5EB78CF8B2F752A59222
-:10F3000046EF4FC0FCEA89CA671997CF1330EE2049
-:10F31000C72119E73F8197457D5D97721F2DA6EDA7
-:10F320009D0859E37EDF546DD4C73BDC0EC37D7569
-:10F33000F604C3FD89C1996F36417B947EC0732466
-:10F34000B8DA407F17D87B68CF25E1FC7FF472F5EF
-:10F35000E0FD502E64A4CB4C47EFA5DC2797D27A72
-:10F360008FEF93514EABDD46BAAA2EBE791CE23820
-:10F370000DD4BE00DF5ED6151DFA7D625F4A68239C
-:10F3800095CB970B5F77006EA0FFB405B49D2AC2A2
-:10F39000C6B732C358CFF1C1F7BE0F76EA825D46D9
-:10F3A0003B57F9D7435B005E9D2A7EB007F87C800F
-:10F3B00048C8A7F273BB65A86F59C8F8FDD2E546E7
-:10F3C000FEAC593AC164FF8DF1A52A0F8B13CDF520
-:10F3D0000E617DA510FFA1F7959A312E34178C414F
-:10F3E0004CBDE5A6B850A987C5854A212E24CAE59B
-:10F3F0009051769FDE63FBE679DDACDF09F5DF42F5
-:10F4000056413C8544168F835B36F1F88AD1DE1273
-:10F4100065A704F250CADBEFB0B63B802EDFADCC5F
-:10F420007E91487ADC7895D98E10F220CA95E02337
-:10F43000710549C61CE83F2F63B67F9C2F6D743859
-:10F44000AEE03C10E4F8C51357DFCDDF67737D9F56
-:10F450003740ED66068C97EC02BB71FC12D1401F61
-:10F460004F5179672DF75F8995DB868176944B5AEA
-:10F470001E469096F7A2FE364D66FADB9D53ABA46E
-:10F4800031FB1957DFCD7A3040824F15D3713D9E45
-:10F490009FF7E452FA5DEF3E61072C3AEAD53E86CB
-:10F4A0007B4F0CAE4379BD40E515D83E5AEF4F6B0C
-:10F4B000B1F3FE7F96BE9BF57C44FF47E93BB35B0F
-:10F4C000C7872DD89FAA8B0AD6D37099E03C6ED6F9
-:10F4D000FF13DC7F7B597F53F3C27C58F83EFAC799
-:10F4E000E453EB3BF3430E0C106CBFFCDC7B32EDC2
-:10F4F000F9E7A6EF42CF85DE5EB3BEFF27E9B9F993
-:10F50000F9B72D1CF727D0D3A8FE07B1DCE61452BB
-:10F510000071B60E29D9BB2907F49DC57DCCE5271E
-:10F52000C8221E6B0FFE91F6AB850A4B2A65F51AB1
-:10F53000D23F0DE461E2640FD6779FA53F13EE3F03
-:10F540002491CC9B65C0CF643FCCBF924EC8C3947E
-:10F5500024C9E322CB6712F2B81CB0CBB43E6920B9
-:10F56000FC5789F2993C443C80076F90020E786EFC
-:10F57000A37CD26879A29C469C48FD37E4D742AE72
-:10F58000740BED5A18E3F025D6C17EC1779C3F96E7
-:10F59000BBCEDC4CEB2561E9CACDD17EEEB186B2A3
-:10F5A000BC1AF433F4E3FB206EF58CEA7D3E0EDFEB
-:10F5B0002D9FB29F607E909F16C6CFA025D9FB7C61
-:10F5C0001CBC35FFDAEB7F2B995ECB808FB78CE6C6
-:10F5D000A33448F9077C50FE7605FCC43237932FDC
-:10F5E000F9435587380D91EDA1E971E858C3E978E1
-:10F5F0005CD66FA3C886C855EDC89F0330FE1AF0CD
-:10F600002F837C3B46BEE6C92AD2253790B538BF4A
-:10F6100090B005ECC878E361558822C338F65D41A7
-:10F62000BBDBCAE9B3D1E7DACCC4E3253778236181
-:10F630003A4EE443364E07E61BE5723DA7FF414EC6
-:10F64000179827A8BF14EAA7FC92FFACAE8D374FDE
-:10F650006C17FCE7FC32973FF025D67F517EABCC90
-:10F66000F42978EDE3B66C525EE27113F22E0D1EB2
-:10F670004D347E6B4371F47B8E6CE1FD0D4A57A3D4
-:10F680000FF3B85CCA5574DCA07F35463E6EE6FDCC
-:10F690005ACEEBBD4BD2FF1EE4E106A9E91FE04ABA
-:10F6A000AAFB50FF40C6A1DCCD44FF6FFCFD06D095
-:10F6B0005352677C4F9F6FC2EF9AFB707D4A3C3F6D
-:10F6C0002CE95B64F6BE15BFD38DEFA91CB6C173E0
-:10F6D0002A2F449E09CF193FA99C103BBD6FDD75B1
-:10F6E000F79781AFF4FBC7B07E72DAF0BD150C441A
-:10F6F0003ABB4A33D9F559903BEE9F6E6ED691AF27
-:10F700002A59CBFD67369FCDE5F399FDAF6C1EBC42
-:10F71000E05231AEA524E9A130BDA6BBC23AC40374
-:10F720002790BE20F863CB96CA063BDF6C9A5FBE7B
-:10F730007C8F71FE5DBE3ACB70FFD587F20CF781EE
-:10F74000F5371BEA5BB16596E1FE9EED6586FB959C
-:10F750003BAB0CDFAFFA4983E1FD379E5B62B85FDC
-:10F76000FDC29D71D737C57CF788E5DDD54DB45F07
-:10F770009BE1550C5E54A2EB971686C78CDF51F1C6
-:10F78000F32873A01CC15084594E15D3FA67FF8823
-:10F79000FEAC33CCB7878239190015F41C4543FC05
-:10F7A0001FD4FBF233A378A0CAB3B231DEFC2BE83E
-:10F7B0005178393FE9AF8271D315633985AFD76A84
-:10F7C000DE08C661CCEBB58A671ECEEF667ADF91A4
-:10F7D0005332C02ED1BA3DB84EAB5DDD7C3A6EFFE0
-:10F7E000A825BCAAFEF1F6FCD0CFBCC4FD9A5B1CD8
-:10F7F0009181BCABED57944E23EE11EBE40B5851C5
-:10F80000529AF31CFA630B803E989F8B19DEB1D39A
-:10F81000FFD83CCBF8DFC0CB373DE4B2023E6EAA46
-:10F8200036D2D9C07114D54305EC446981E93DD085
-:10F830003903CA19F1520F97474DE1EBE573C81C24
-:10F840001C07AEB78B84DED6B0380771C55F47AFF3
-:10F85000BF440BCDC2F651FEC4F3D70AF292E1BB0E
-:10F86000056DC463A3F8E491D91B5D9580F375AB76
-:10F87000B78E96AEF2F278932E239EBDAE80DD3722
-:10F8800056B3F8537DA00FE3808DF78436C275CA56
-:10F89000AAB0827498F8FAAC279486D880F3378B94
-:10F8A000F32B4BF095F351D8F129AB8DE3D8586C7D
-:10F8B000E4D742CE4F339F17723E2E34F1B10BFE88
-:10F8C000A07C999D808F0B381EB5CFE6FEDD707A47
-:10F8D0005CBFF1591E1F13F2A398E635613F46E65F
-:10F8E000372EBF8F831D079CE7E23885CF7B89F4D5
-:10F8F000C89FDFB2C30FF1D60CAB61FD621EEF6B88
-:10F90000693E5BEF28CD9011F797BADF30C4994B71
-:10F9100047E2A3BA5633272A9F5D03CCFF68759F41
-:10F9200096619C1AF219CEDFC2F923E27F07F8BA7A
-:10F930009199AEA3D382D9808F8E5D0C66AF2B8652
-:10F94000F88F8472D279EB03D92C5F80C773797BEF
-:10F95000AF0C05D17F3B3630F6FAA2C0F966B92963
-:10F96000F586709DB174A05D86FED645E81C44BB4B
-:10F970003E2FFC0BD95384716905E86974AF503090
-:10F980005EE66E5120BE5CE7DE5505FCF091D06668
-:10F9900027C4D53C92370C7C2C64FABB8AFE17AB8B
-:10F9A000BF82DEDAC18002FA5EEB31FA353E2E6F9D
-:10F9B000356ED3F3FC5A94379F49DE3609399B4E96
-:10F9C000A6C7CA99885BAB43B95C5FE3CB5927E70D
-:10F9D000C7BFF338EB1F787CFA1DBEAEF7BB0D1E18
-:10F9E000BCBEB2A1009F1FD9E0C5FBB73794E0FDB4
-:10F9F0006F21CE4BEFDFE071DCD73734E1FDA90D8D
-:10FA0000CD78DFCBE3B4428EB7F2F5941AB913E3A5
-:10FA10008B0DDE80DD15234F0D9C6E147DC021857E
-:10FA2000F1E3AFB669FB1590AFD3237A42D05E2CD9
-:10FA30006ECCD9BD8DF2C5F65D12005C693BF4AFAA
-:10FA4000CAF554FE1BEA72AC2BA1BD60BB320BE4BD
-:10FA500031FCAF4A1E3C6FBCD57A779CF6453B899A
-:10FA6000DA37DBB72575463FB854C4D1070241E801
-:10FA7000E7A4814018E82B75AB9E7871E1EEC92BA5
-:10FA8000DD204FAD67036E90A7D6C97B64E6AFB3A8
-:10FA900078B8CAE554942F75EF36E8A1CAE9EEA00C
-:10FAA000CF81DE8E71F4E000E79B28E753C2B24BB2
-:10FAB0004BDC3F9F295EBE458AEFB7265B19AE75CA
-:10FAC000F2F5556A3315D0331051A07F12151BD0B3
-:10FAD0002F4D63710B8737C0EDB2711E4F2B696AD2
-:10FAE00002BBA465106F2D9837ADDF0D722397CC44
-:10FAF0003B0BF32C298CB1DBE0F798FDFFD87B1989
-:10FB0000A7AE604A3A5CCDE5187F352E426DB7321C
-:10FB1000FA1EE3710EC15F8DF3B7D473ECDFC0AE94
-:10FB20003EE665F198C732D8BAEC85921588CB4A83
-:10FB3000B95F60233BB07C3269C7EB66AE67174A9A
-:10FB40004E13D07B59A1B83903E8B18782F47BA763
-:10FB5000C9BE2B9A91DF12E5C972C0D7038AC1DFF3
-:10FB6000904A989DB783BF0E7E0CC72F513F2F4000
-:10FB7000AE00F3AF124F6DB11AFD31711D502C283C
-:10FB80000F2EAB299FEEFF7AFE1DFD5CF927FCC40A
-:10FB9000119C77F8EB04D663443EA128FF8A29DE46
-:10FBA000A466B3751873BD775819DF2BAC1C1F0BF7
-:10FBB0003CE133B79314047EAAD49F4A9246D7936C
-:10FBC000A83D3230739CB8F5466CFF94E262FE04A7
-:10FBD000CF07A26EB964F04FECBA3B76BD7FE47BF1
-:10FBE000B7C5A0A7A3E966FCF9BCE95D401D52B802
-:10FBF0002E1476B884E1C9451E8A27E99F8B3426E6
-:10FC0000A727FD526813CAA96EF0B7EA4A6ACFA2C5
-:10FC10005DA2FE883A87E3744A7F1BD44BEB797D63
-:10FC2000B2F86EC49E58AEDC32BA9EA66A867B4895
-:10FC3000F097F363E3074D545C0A6642BDEC7B5AD0
-:10FC4000B4FB4A3C3AB8DD6A2A7960A1E6847B5D60
-:10FC50007A1AF05E610C3E00BEE6DB8C7C36D9BFC2
-:10FC6000EA5176CF686FE751F9DD4FDBA993D736BC
-:10FC700042C8BBF68915FB5E4572841FE2895BEFC3
-:10FC800071F8E376407F46BC42BC2C8FA32AE8691A
-:10FC900044BE6748249403F41BE998976DF2C3327D
-:10FCA000CCFDD881E37848A1F3081DAF43741C77DD
-:10FCB000A07F1CDF9F127E5E45CE30FA53C2DF2349
-:10FCC000DCDF73D1FF62F158392FEF7FC8A300FE4C
-:10FCD000F5DB4D71E691FC6382FE540531D25BCEBB
-:10FCE000FDBE7293DF27F4FD25612F855FCBEDE12B
-:10FCF0001DC29F2A1F7B7DB9C7944F574D096FBF07
-:10FD0000063D204015AC3791113E19E4AB3BE7FAB4
-:10FD1000F630E5EB1DDE24B6DE42E954843D473E75
-:10FD2000319CBD9097BFC3A3A2FCFB34B67ED138F3
-:10FD30004EDCC257C2D60D4ED925361F04C99B24AE
-:10FD4000263FBCCAC3ECB566928B6C4F5335AC03EF
-:10FD5000698AE40D91D1F25ACDFD39F87E3D6545B1
-:10FD6000753EF5C967C6CB2FEF83D02A29A7343C4F
-:10FD70009B93787C756FA40A86E76AC7979870F69C
-:10FD8000A9C87B98D775A150C2759FEE9C8FD13FB3
-:10FD900010EB3B51FE1DC57C145FC947E8AF8CE4F6
-:10FDA0006DF1FA168AFA4A0EE37ACDF75C87314F85
-:10FDB000E424ACE3D2EF4F2A110DFC90F9025F511D
-:10FDC0008E86053F73204F82D517E67ED529FB1B13
-:10FDD0000EB09B22EFA4CB27D7C58B7356C82CCE71
-:10FDE0002CAE37A96CDE99A3323C27EEC5F88EC83D
-:10FDF000937CBC98F9E1DF318CBBB97E28DF8CF1B4
-:10FE0000C170E158FE68A389CFD3543EEF71BCD1D5
-:10FE100019191BD78A7E9AF960EEA7F93BA7CAE2A7
-:10FE200065F758F59BD5D9D176C47C672EBFC81E1F
-:10FE30003F2FC75F628C4F9AF372EEB1064A55CAE4
-:10FE4000CF2A45DA92EA41BB86FA74E8B28638E6F0
-:10FE500042E4D01618D623C32C3E5A4EE4908DCDE2
-:10FE60000B8DB06E27F446C8BF998EF1DA2F1FEEC6
-:10FE7000477FDC7F29520DF27787AF1BEDEA026ADC
-:10FE80005727C4B1ABF3E4C12D13407FBD6C7FC7CE
-:10FE9000A9DFF755E3BD26613EAC5E9EA74C003955
-:10FEA00070C58F57CDE572327A3D4FD8559702B85D
-:10FEB000C11C6F9BCBF56EAE491E02EA080EBAED6F
-:10FEC0004ADEF8E394481E2E442E3C182F8E2AAEAC
-:10FED0005509C6F73E62E26FA731FE6CAE47C48398
-:10FEE00088DC990DFA2CFC5F73B93695AD7B1C2923
-:10FEF000BA97C4E655097BA096B46B1017EF2D197D
-:10FF00007BBE30E70FFA89314FACCA6E5C8F7D4AF9
-:10FF1000D11F01798CE2A416E6AF96B4A0BFBAB0A7
-:10FF200090EF0B2ABA17FD53E157B7DEBE17F3B9AE
-:10FF300044BE96F04FCD74F74E7E11F379C6A35BA5
-:10FF4000F8F1C76D325B87A07EBB07FD768AFBE2C6
-:10FF50007CF78A8DF1EB578ABE0BF4758B5577B71A
-:10FF6000C03A6391CDFB7C9C7118B031FDEE4DB071
-:10FF7000DEFA0758F8988DFD403E98E71BE1C78AE6
-:10FF80007D4A93DC4C6F1BB81F5B56D882FA98E60B
-:10FF9000A67E2BF0CDCBFC563268F453176A7D5900
-:10FFA00030FEE6F94E1EE67EED55FAAD5B93981CE9
-:10FFB000055CC4EEA6EF93140A4DE9FCF7A45C7946
-:10FFC00018F8B1358DA03F70324D0DED8E136F785E
-:10FFD0009BCB5B8DBCDA206FE51C97A8D5FD1AC4BE
-:10FFE000034E0EB3385EA271DB66C2E9B905C46F79
-:10FFF00073C235E2077ED07BDD86D708E6677FBF18
-:020000021000EC
-:1000000068656EBCFA76B72971E7A53FF3715B2C82
-:10001000F2B5EB583CF2BE4215E3C293EADE3D8AEC
-:1000200072DAC8E574810DFBDD5BA4E0B8F4DE9EF6
-:10003000D30EEB9ABD4576CC47E92EFACDEF215F82
-:10004000BBBC4432E49708F92D075C0DF5DB59BCC5
-:10005000F33E37B3C3BD1AC72F3C6F640D1FD39354
-:10006000FBDE77C6E68D2C1172DFC8E3E426FC4484
-:10007000CD48DC751C91477CBE91C585EF13FDDD35
-:10008000BF770BE85D03979BEE8B2BDDA89FFB5999
-:100090007E5E6B510BC68BBA27BFA5C2FD1AF7193E
-:1000A00015EECDB8428CEB7D25BF62F9917C5CD713
-:1000B000403C9ECAFBCB99375B3DF47E71F8762BB2
-:1000C000C43B457C76D43A145F4FA965DD27B56EF5
-:1000D00086AF8F663A487206F04B0E49C0B7701271
-:1000E0004986FC33B7359444EF1B94FE69805B1C52
-:1000F00026BC78FED77BB341BF8FCCF8408176AF6A
-:100100002B79B715FA31A5642FC6FBB3F6EFED498D
-:10011000A7F52C2C205EDD339A9E1A3E3FDD97C159
-:10012000F285EEF38682B0EFECDC65B69FA2F2D7E3
-:100130006F54C1B4367A5D46278043C4BA8EE2E676
-:10014000EB227C7D825CBE22C58E5B8312B083FD78
-:100150006D2D79C309F42EE67CCBDD27B7807C5763
-:10016000FF7AD657404EC8ED36D774DAE039D76FEC
-:100170009DD76BECFDBDACDEB9015ABEA1706FF628
-:10018000CAA2D1F665447F0AFFB22140E93939FF9E
-:1001900037D980DBDEA076D703ED72BB65F697CC4E
-:1001A000F3AA392FC6DCEF4C65519D6D368CF78F65
-:1001B000DD39317246EDC00AA07FCDD376CCE34A5B
-:1001C000DBFFBA2A837DA3F8BD568ACAD11A2E470F
-:1001D0000D1AB37FAD4524B44902F93BD358067AD2
-:1001E000F72ACB379CB4FF5D963F6A9A1F7AF9BC19
-:1001F00021E6E3DEC9EFA1FE9CDFC7F52568916229
-:10020000E3495A4964298C8BE04FA7C9DEF8ECF129
-:10021000E326EFD8185E2DD7D87B8DDA6F58D73606
-:10022000BFAFE4FE54155C63E685076D0CF78AEBFF
-:1002300035E4213CF55DAAFFDDDB0FB9EF463BA5B8
-:10024000216E5FB37F6F01ACD964EEDB5BCDED0552
-:10025000FA6532EFE724E2413BB550B3B3F50393BF
-:100260009C5B4B7685013E8B791A1C7225336A475D
-:10027000E4D838441C3F8C04F537F363F2BEE8FC45
-:100280004EC0AE54B959FCD52C276925D4EEE020D8
-:1002900050EEC5ACFB9AE5B6410BB8613D9BEACF89
-:1002A00059B6FE49E72B884FC88D5E1C4F2E9F160E
-:1002B000FA1FCC7F0EAF513EAD05AA01AF98E9F809
-:1002C000A9CD88FFC5FC9CE6EE47FA166AEDD9D0A9
-:1002D000FE24773FFA5BD4BE67C355C899B0D723D5
-:1002E000F257745B3DD877906B58223F59322B19E7
-:1002F000EC60839BE114628AA7F7BAC7F6377A4CA1
-:10030000F278D2C5FCAB861292EC4A057D6771A7E4
-:10031000DE47D3773962E272FF640D74D862E2EB94
-:10032000CEC22FD6BB9C606758FE5629355FD6BC1F
-:10033000683C53C44DC57A9F88938E8A671676634E
-:100340007E9755E45DF0F5BF51793F09D61DC5553F
-:10035000C4336D9BDA152F5F2F413CD6C8E370C3C1
-:1003600033C78987B2F803C567BFB54D1C1F9FED22
-:10037000E17EE600180F7A5D6573E155837C144ACF
-:100380006A6F527CDC7690FB6DD7A29FC764F88EB3
-:10039000B5F327937C89E7513CCCF46052C9DE9ECB
-:1003A000583C5CDE467943C7496D23D3486A62B93D
-:1003B0005B3862F77E6590AF117C3C0E2E16F275AD
-:1003C00051D6FF669B98B85C03A723D1FBD6225B6E
-:1003D00033E45BD17264522ABBDE40AF3D33F66634
-:1003E0005BE8F3D7007FC5D0D1FBCC7EECC71F54B0
-:1003F000B6CFA6F7E2CA5CC007A7143DD53EF1EA26
-:10040000E5C7AC4FF6D9BA6723D5BFAE6C3BCECFAC
-:100410005D6E86435E879231F2B44E0D5C679F8DB0
-:10042000104427E9DCC8093907A3597D75FBC4EEE0
-:1004300072F43FD414333F6C875793619D8FC9CDBD
-:10044000236A3FE6E3DC456BB7D1760E6B72E60AB2
-:100450007A3FD3CEE4F170D01A37FF79A69DE1E759
-:10046000756AD34CA093B4AF453D6B91E426D07F21
-:10047000E2BDBAF8DCE68EF879A555D1FAE762FD5F
-:10048000FB68FD801BBC3CFE4E5C9971E3EDBCDF5C
-:100490006142EA405F1E4B33FA9B3E3B9BF7E646C8
-:1004A000EBAF8FAD1FF3B366E3F30538CE2FB0E7A4
-:1004B0000576A617FE3C96D726F828EA5D1AAD6F9A
-:1004C00029D6B79F7D976FE7EB069C6E81F3CDF938
-:1004D0004F35496C3CA2FBFA08DACD528AC3F17C55
-:1004E0008548E830DCFB09DF9729319CDE95C2F6B0
-:1004F00031755987F09C85EE4F3E7E07F66B2A8A50
-:1005000011DFDBB8EC2897F7C850AE34FB8223F636
-:10051000DC8172FEBE7BD8B8AEAA73BC7390F07C4F
-:100520000D5E9F3F419C4BE0F80E5E3EBA0ECCF64E
-:10053000294E1A60FB122B5CFC9C88B46FA35F2DC4
-:10054000F47CEB276B199E9FCAF7AF65EF9163E9C7
-:1005500051383DA5CAFBDFDC0BFD8F1017C659C310
-:10056000BF73E4D07EEBC7646F129436F9193E8EE8
-:100570006BCB396E4D84EF8F4A81E7C22CBE69C0C8
-:10058000F94733FF59061C5A1A66EB4C151CD7570E
-:1005900028A12C981F6AB3593CAAE3625F16E2F9BE
-:1005A0008F3371BEB84ED985FD9EA20C619EC43CAE
-:1005B00013FECF1A20E837F8A9DFA0C7C12D357286
-:1005C0007635ECCF2DF5B0FDB5A55E56BE8BB61FCA
-:1005D000A4E52B2FFEA007E0FA687C6FC429E59EF6
-:1005E000A12A342326DC7FCD783A9BC5A52A4C7EF0
-:1005F000829007CA0FDC37DFA13C68073EE4665BE8
-:10060000987F30D5B21CF846ACCC3FD8EAFA961D9C
-:10061000FD03FA1EFC830AEE1F545C8E64817F602A
-:10062000EE8F90AFDCCB1FA37FD03DF431F239FCCD
-:10063000C99E2CB0CB228F5CE07A513E53F11F0152
-:100640003D2E37E17C9BC0F9C36B09E0FC0AC588ED
-:10065000F36D5CCE2A38CEEF80F52E90D7B399C7D4
-:1006600073683F0E0A9C3FEC32E0FC52CE8783A0B9
-:100670008F3138FFE059B6AFB22B3BD780F347FC40
-:10068000C84F89F37D49CCEE081C5FCBF18278FF1F
-:1006900021B7E3667C6F7E7FADF89E70FC1EC5C5FA
-:1006A00046B9EDDE9E8BEB2AA52E3BCA6DF9406064
-:1006B000F801FA2A7378ED1F9F007EBB1D5EF8CC0F
-:1006C000C6C765DCFC4F13DE9F44228753416FF29F
-:1006D00059BE515AB60BF5A482EA496D3C7D30E310
-:1006E000FF6C366E554A8BC88B1B13E757682EC4B8
-:1006F000D98A527B5538DFAC5775F9B631FDD2AC8B
-:1007000024230EF30BBBA93C1044BBA93C1006FDEF
-:10071000F15F66F933DD9F7CDB1D7B9EC3566EFF68
-:10072000853D17FA78F0938F791E8D49AE958F1C11
-:10073000B1FB8A0F66331CF2332582FA7BF0F2CCD0
-:10074000E4D8389519E71FE438BF82E3FC8ACB4C24
-:100750004F0E8EC6F9B725C5E036E7E56588F3AFDD
-:10076000369F40F8AFB526FFF55DBBD17F4D24D74E
-:10077000FFC1E7F3283F8736239E5586D87CCAF908
-:10078000A9703C6B031C790BCEA3B83F5EE8F1283F
-:10079000BE5A3F32CC937E8EEF0E2A578D679B93C5
-:1007A00066272E57310E9EDDFA89DA8CFCE778B683
-:1007B00042E0D9BF45B262F12CD1180E3BF8CC25EE
-:1007C000ECC7C1348663CD382C31EE60F77E4DE244
-:1007D000EB30463C21EAE94821D9189F93DE46BE1A
-:1007E0007559FF12178F08FC61C61DC4843746EA8D
-:1007F000059C027860F88203F6C1761C93F9BEBAB4
-:10080000CF8A4322722CEE10DF75A5E8E8CF0B5C8F
-:10081000B2F593338833B60E113C3941E0128A3772
-:100820000E833FA7D3F93BC913A55FE01381374679
-:10083000FAA1B0BCD12E17B7FF09E2A09F373E1135
-:10084000B8C4CC9F8356865B3A2EBEF599F08A19C0
-:100850009F98E99DB76B474F2A2D373F7F08ED5092
-:1008600087B70FF799770DE766001FC6C72D7E5C27
-:10087000871F895372FC71ADB825115E4984330E10
-:10088000028ED1A238C68C5FCCFCCCCD262D10F7C1
-:1008900017B82691DE42B97B9D51BC93A81CB5DBED
-:1008A000888312D6733972AD38E84CD298388810E4
-:1008B00026372C3F28113ED9EA7569B1F9AA623E64
-:1008C000E9CEBEF00EEE2B1F50F17C84EEB3CC7E51
-:1008D00026C247874C7A7710EC85169DAF12F265D9
-:1008E000809DF3217054A272578B9FC43CE24B62EF
-:1008F000F344A2F5C9AC6486B31EC965FEB2F97DA6
-:1009000034DFC488A3484611CAF3FD7CDF65225C4E
-:100910004548C4C9E254417CBE8CFB9B181B9CC358
-:10092000F30D28A94DF9241FE685263B1BAF93B391
-:1009300025F40316C1732A4FFE6AB63E74BA88D9ED
-:10094000EB937E1BDAEFE3E7593E62770A8BB39EA7
-:10095000BC35C9BB9B92701EEAA5F3F0E9A4BE6248
-:1009600098F767887EA6B37E2E708457E3FAF8ACBA
-:100970009B2DC19CD1FAFD4832A7235DC375B606F5
-:100980008E3F619D306BE6E8FD04CF24E7209F2079
-:100990004F3E8B96DB62E9FB7E2E7D946461EBAA71
-:1009A00066BEFE99D3038CB1C5F0A131DFAE2751ED
-:1009B000F94FBA89AD4F7555DB301F270996D269BB
-:1009C000BDDB0A7253E2C991E897F9F94F9399FF99
-:1009D0007D7A6A04E7B1533CBF778D22050973B075
-:1009E000B09FCA8429BBB6D1A25F4E66E7D59CFAF8
-:1009F000F5EB18273A91C6F9A04B98C770126C21F5
-:100A0000C4FB5C5A08F665D2EFADCBC6C8FBE8F371
-:100A1000D716B0F53242245847833F7247F37B49DB
-:100A20009D8CFD5EE2DAFE00E8E3E9BA371C70FE59
-:100A3000E4C2610B01BD5BE22ABD179E77A7303986
-:100A4000063E036E5A52FDC56FC2F3C646E3781CDC
-:100A500049CE65E7C8286C3C60FCB2668E6E97CEC6
-:100A60007E01353386FFBEDFFC9D1433AF88BC1595
-:100A70007B823CBE44FD9662EDAF1C8D3B4E2AD975
-:100A8000B503F6C73415B3732F1A3C2408EBBC0D1D
-:100A90005E12CEE1F285F9343DF96C5F10D7AFB448
-:100AA000925D6DB910A71C56D8FAB3693E29A363AD
-:100AB000959D0E7173363E2767CBE8D79595305CD0
-:100AC0005FC6717D83DE82EB7A8D8FF66CCF85F702
-:100AD00072768DDFC3D74763F847F6B338DC2293CD
-:100AE0009CA798E2FC655E537E20CFEBEB2A78CE84
-:100AF00005F2F3483A979F9912EAD1EB92E7D1DCDD
-:100B000098F9A83E59E41F118F35463E46E4818F7F
-:100B1000AF99EF89F869E693592ECCFC3E9962E2D1
-:100B20005702FE27E2775989FFBF94BFE7AC362B07
-:100B3000C86DB7F5836CEE0F1139C69E98F9764EE5
-:100B4000F3A4809D383DCCE69B13533D5FC173B049
-:100B5000A81EE3399E5C1FA2E340F5C119ABCF6F1D
-:100B60004F037DA67266857A1A75494F02FDDBB781
-:100B7000F501EC37E8A933AA4766FE8FD23FFABFEA
-:100B800022E8CD1BAD47E6BCB14FAB7FDF017B0E4A
-:100B9000F182640FF24FD8D346E2FA4AEC3E56B1E6
-:100BA0009EDE9DD3DA04FBCF1B062C78DE4FC7F008
-:100BB0008BCA0AD8D75A27E1B4A6913EA4576B63D3
-:100BC0007911D73FFB3081BCF547A7122FD82BAD49
-:100BD0008DE549D0F798272170BD38BF91BED75910
-:100BE0005E88F19CA514AF31CF67F16025AE2FF47C
-:100BF000F0738F46FC0B22E4D2B8BFA5159E4C8E35
-:100C0000EE876ABB18C2F84C4782FD2EE26AF617DF
-:100C1000CCD723877EF1CDBD905F91AFBA005294BF
-:100C20000F87ED50DFF70B0FD5613E5B9DE48275BA
-:100C3000B7231FB76F86F38E1617BE1737BFE7C0EF
-:100C4000B9A7BCD08F03D61DDE74B00F9BD8BC955E
-:100C50007443E1D41563E0A3409DBF2E6746E27C58
-:100C600092D50E1EF7EFFEFAEE47607D7B50F582BF
-:100C7000FF52CFFD8E066547F30A3A9E3DF325EFFE
-:100C800046FABCE7C627D61E8238EB5915384E7A8D
-:100C90002FEEC9063FE3B567ECE87F1EF978CF4F2A
-:100CA000309F64509D03FD1DA17FBAC6DE9F7FE982
-:100CB00018D899C5058B8BA19D2485EC0079BA6E57
-:100CC000B8FD1D3817A161409D0DF66771DD2EFB43
-:100CD000D7804F75BFB24F07FF63D85303E3999D89
-:100CE0001CD01D541EB30A73BE9701ED7889574777
-:100CF000BEF611E0ABC84310B85EF8931DF3735213
-:100D0000480C5F4F0FE7A6603CB28EE72BCC979B59
-:100D1000C03F3EED9A9E8271C83A96A760E6D762C0
-:100D2000C0E9A9405FCED49571E6EFDCBABF6C088C
-:100D300040DCF7465B733C7E0738BF93FEBC7237DE
-:100D4000F437E9C77617C0EBA4047998790E1E8FA3
-:100D5000735F5D7C44E019CA57BB3526EE47F1FE50
-:100D6000D71C3171976B6DFF4EC8D99E0D718AC02B
-:100D7000FD504F198F8F94F3F84822BA4AC7895B08
-:100D80005039423E2D86B8C52DEC7A03BDF6D4E726
-:100D90004C35C42D88EE063B7B1AD6E1008F298B9B
-:100DA0003638601DEE1C8B5F2492DFC5F97BEE3C6C
-:100DB0001463EF7AAD7A36F8B93D37BE8D7ED2FF37
-:100DC0002EF91D91B3BA5FB5C1F959DB0A174F046B
-:100DD000FB1723C7CF00FDD72AC766FE75CCCF4BC4
-:100DE000215A549E851C8F964B09FD5121DF89C6DF
-:100DF00003CA813F2AE43C51B9D3F36F882BFFD15A
-:100E00007A86C6D4832F38187E0938D8FC524E749F
-:100E100017D8E17959EFA0DFFA0AB7C7237292D247
-:100E200077E7FDD4EE049FB7E37A79D74515CF591C
-:100E3000EF7A6ED5CF60DEE819AE749DC179DCEF34
-:100E40005A42E9BA11FC87421C9F1E25264EF827FC
-:100E500087F01F8C79BDFFE2FA63BA9FCDB39A9FEA
-:100E6000F2FB163E4FDC94F35C32CCE7B7F07D1317
-:100E7000333AD5B8F3328710A430E3750B40FFC284
-:100E80007DC672DAC83EF4760BAC03DEF482E93D2F
-:100E9000DF3F6DCE83FCBDC3B4CFC934DFDA2F8E04
-:100EA000EDF7FE12E6270A255EE079BEFFC2CF0D00
-:100EB0006CE7E706BE08FB59E9751FEC67A5CF5F35
-:100EC00082FDACF47E3FDFCF4AB2AFEE7C7871AEEC
-:100ED00093CAF9D036396488878A7DDE1D706E1218
-:100EE000E001B7CACE9B7351B405F9281C2F5A1CD8
-:100EF0003EBB4AC755FD13C17C946F9DED4379D825
-:100F0000CEE759338E11E73A9AE952A37C54204E2A
-:100F1000D53535D0DC54C8070CE466F6A45DDB6239
-:100F2000F0B4A631B968E57E5BF022093D2F45CBD0
-:100F30009FB848F66C6371B6A00CB803FEA2225CA1
-:100F40003F4010C7D5176F45FF0B7020E0323C675C
-:100F50002C17F6A5BE8478AE7E78CEBD0CB7E8A37C
-:100F600070DC08DF64E413C3E7C5AFE3F9CCF50335
-:100F7000F1E52D9AC7D4DC931FB3FFA07138D0C818
-:100F8000F1912BF67C04D52457E67AD28A251C975A
-:100F900005053CDEC3D73FC4786E5EDB87F91EBD16
-:100FA000C5360FC417CC38D18CF3D562B65F4CB9B7
-:100FB0009DED5BADBF48303F1E0526337A0E9BCAC0
-:100FC000F3793B5C012FC4311BBC26DCCBCF912ACB
-:100FD0002F30E27933DE57075413DE0FB2F9701366
-:100FE0001BCF93E709FA51CFEF64F181036E0F93A2
-:100FF0003F1242BFA7C26DB9759B07D6A9D83ECC98
-:10100000D26182F192D2010FEEABAE1824E1EB6710
-:10101000E079C36D789E90897F1510EA4D877A3C00
-:101020003D13219EA7902D708E4CA6BD45073D50C7
-:10103000DD6B71DF0DE4314C6072648FE5AF9A7C3B
-:101040007C33A840058FAB89DFA79864DF8B7210D3
-:10105000337E63AE87A95CEEC4FA969FD7EF1F6418
-:10106000796D663948B30F613CBE7258C3F39ECDAB
-:10107000E36E1ED74A2DF2FEE3B03FE362B2771370
-:101080008CB39D8DB3184755EE94611F0751D878E6
-:1010900089F52F73FCB5CCB43FCE4C97381761BDA2
-:1010A00066DA2FC6717C25A7AE2D69AFE17CDA4ADE
-:1010B0006E6746E66D7B1E5FC762E7991E181C7B54
-:1010C0001DEB808B9DEF475C8BC7B17B9B98FFCD61
-:1010D000CF11282B21C98073CA060993AF472D2150
-:1010E000474E6CF99061FFB87370593D9EC7E87226
-:1010F00055439CAD8CB0F54A7D80E0FAA54EF6CA0A
-:1011000081987E89751095C7C55489F54BF0C94CF7
-:10111000DF5DC3467FE82B41E3BE873B1F36EED33E
-:10112000F8D2DA2CC3FBDA557986F7359E9B0DF79A
-:101130005F741BCF09FA42C0784ED092E62A43F979
-:10114000454DC67382EEA8339E13D4A0DF69D25FEB
-:10115000DD20DF5D52DF0FA1FF16C7EFF3C68A0760
-:10116000978FB76E1C64E706A11F1867BF8B795F66
-:10117000DB079AC00B463DE809FAD9B93A039E9DB0
-:101180007E7A7F8878157470F9F941358495AB7152
-:10119000B3F596EA8CF8FEBCB083E6F50A71FE5F03
-:1011A000D9601FCA41B9E9BCBF52F7BCB8E779BEE4
-:1011B000A771BC20CEBF4870CEC5A8F9FB6AFBC79B
-:1011C000D799C6ED1F6FB794F41D76E624EEDFD5F0
-:1011D000F66B248F0BCE1DA4FCE8834793D97B8D3F
-:1011E000EADB96B4023CE722C35E29A54C8CC63BE1
-:1011F000893EEBAAF2CEBA791C9FE84BAEEADCD26C
-:101200000CBB87E9BFCEF0D116490FC13979E6751D
-:101210005395CFA79322ECBC0B1F3FEF22690BD154
-:101220000B298B829504D7F183B9F6D06609F2C6F3
-:10123000D97ED2D61B2D38FFB40EE93BE0772DDAEC
-:101240006E54703F638DAC6179359BCD4F3EC8B114
-:10125000877C89D7F466C3391DEE4D2ED013F52750
-:10126000EC7DA2FE744E569BE3F90BC5294CEE4F64
-:10127000294D8529281FBA9BAD4784F0DC33917F27
-:101280009B28EF96024717DA6D22F0011BBFEFC1D2
-:101290007A4A1CFDF5A730BFD8572885AC9047BACD
-:1012A0009484AC63F8959D6E4BDC78C64D29DC5F69
-:1012B000BE7C05CFB353C5F97A59EC7CBD6ED3B96A
-:1012C0009537F17E1E4AB1E3B53B670FDBA76A3A5B
-:1012D0001FBDDEB392C4E25971CE8F1A790FE34C71
-:1012E00027C7395F44AC3F6DE7FB97AB2E5A9AE2B4
-:1012F000D1FF618A82743CAF59E3F6EF5B9CDECE8E
-:10130000695E3C57B5F5490B9EA3EF73B74EC1FD1F
-:10131000DD295F232CDEC5E8AFE77AEA73873693D1
-:10132000145CA77E1A7E27442DB1412C8F9CBCB142
-:1013300005CF85DD0E797339D1FEA58875EB9D87C4
-:10134000EAF28AD9F9F310EFA91D6079E50B4B7623
-:10135000F13C927EDCAF68FE9D92D2BA800EF3F231
-:10136000C2C6F066C43F5E8F1F7FB7847837E2EF56
-:10137000A88CDA57A921EEEA1C6672DFF9736F3781
-:10138000FE0E885BE046BDB126337A3E58F9D0A107
-:101390002DB004633E1FCC7CBE90F0CB5413AE1432
-:1013A000FE5803091D56A4D171E644FED863291CDA
-:1013B0008FDC48FD313AFE77D9583EAD6FBD5402FF
-:1013C0004E63D27A6932D8AF1FF1717AB33C80E7AD
-:1013D000B4B426D8677769A45C18F73375E604DCE3
-:1013E000DE31CADF9422B37D7997D9F91EAA9DE533
-:1013F000718D5C79FE8B90EB594E1B962F7132BD2F
-:10140000A8B8F242D658F367A92F40A03FD4BEC473
-:10141000CD0F7B3185ED4754C3EC9C0AB5EDBDEA99
-:1014200078FA2CF4709DDAB40FECC716696D2809B0
-:10143000EDC0D59F5F798BFCD9EDCD654D3F9C42CA
-:10144000FBFF9AF5471ED08FCD01E3EF4B89EB6B85
-:101450005AC08EFC771F7280BF793E39701CE886B7
-:101460007837EC23EC8CBC68477B6AE2BBB99EB54D
-:101470004EC677D5C3DE937FD33D8B63E224754E92
-:1014800089CF1FFA5B40D74CABFE36B4F34865FCFE
-:1014900075C84CA5F21D785FA935FD01AE9D91DDA3
-:1014A000183F4E4ED6FF077C5FAEE8FF0ECFFFC958
-:1014B000AAF7333B5DED3A5310DDD790689C61E1AC
-:1014C000E24C412CBF3E1B9F33EC4D436C9CF5809E
-:1014D000768DE3ECA4D72FC1DC429FF797C75F6FEF
-:1014E000FF119727AA6798AF20F6BDF8DC448F3725
-:1014F0007F89F274FC6527E6B5079B20AFF3E414FF
-:101500000BD91D63E7C47905AD11E6175E7848DA9B
-:10151000CDFC4282F73FFF7ACE6E58DF5D3A8DEB0D
-:1015200031DF7771F743C6FDD0A2DD39A97CFCC756
-:10153000D1CF365E6E732AD3CF1FA4B278D855EBC5
-:101540006706AB47E8A9AAB0EB5D2E265FEFA7B20E
-:10155000AB2D4D12F9EBD3810F540FFB53AE6D7CC5
-:101560009E5A92F7D9E543E883EA35E6E76DE3FA58
-:1015700022EC15A5B3D4C9EC4520F9DAE8CC2CFD52
-:101580001CE458EC3F901D92211EBEC0C9E3955C3F
-:101590007F4F29FA42A093EAEF1D285F89F57789EA
-:1015A00093E9EF179C46FD5DE664FAFB4527D3DF20
-:1015B00066E767D0DF0FB8FEF8791C9F1C37DA1D8D
-:1015C0008A8BEF81FAEB1589EFE7267F9462FC8F17
-:1015D000FA8100D1D964F95C2C6EA0F855C7FD1BC7
-:1015E0006F1AEB7B8B8F17B563F743BD6F41FBB46D
-:1015F0003F9BFF3BE31FF0F1C5387A29F828DB5AFF
-:10160000DCB0FF35D13CB7C0C9E619BF8DEDAF20C6
-:10161000C768FB4586FE7C17F837D29F20F5ECE2C1
-:10162000F72718B73F7DC6FA62FAF308D42BFA53AE
-:1016300071E5F898FAE813FAE80ACB306FFB94F8F2
-:10164000F342AF93CDDB1F3AF427A17EB37C89EB45
-:101650003F727D48B40FE69452F98FC0EF5285D99E
-:1016600041A285FBE598FE9516B4887E072CB171E2
-:10167000B681F876F217CE11FBF00B94BF9D6CDFAC
-:101680000E95EB5FC2FD5D135CCB709FD747CC6EB0
-:10169000BEF5C97A6B1A6DA739E389EFC1F51D67ED
-:1016A0001AD2DB3294EB8461E82F67FB1F5B27B310
-:1016B00073D35A25E3F969EFF0F66EE2F6E91AF40E
-:1016C000FBAD5CF9D3EBC767B50B943F2784FD4CAA
-:1016D000CABB36BB34FB73687FE93482F8B87597B0
-:1016E0008AE76C09BDB90BC6969D77A0431EC55706
-:1016F000E9BD85DE0F81D30DF62A9B10F74C2C1720
-:1017000054F13C04FD3F983DD2CFC095DAA10FB80B
-:101710001D1A802BB543673F8B1D3AEC6476A88D6C
-:10172000CA501FC8A11262F9BDDC9FAAE77D2D2D0A
-:10173000386C88DB097FAA7360B71684BCC102B617
-:101740001F3551BB61F037207125C1EF5689ABFFC2
-:10175000C91576700236535C077154F13B7A9DD0FF
-:10176000BE06ED59F0777E5E2332AEC39BEB6B9DD8
-:10177000CAE7FD142ECF9357A27F65FE1DBD2A77C1
-:1017800068FB4C5A8FEFD8DD6C9FD5E5BBC9B22200
-:10179000C0270102E76DAAF40AF99B82EE69A9D776
-:1017A00093D8DF235689A4CC2B8CDA91AA08095749
-:1017B0001423BEC1FD5C508F87D7132882F93E4D9C
-:1017C00081F5BED712FC1ED39372607A6A4CFD7EFF
-:1017D00062C42B74FCAF4F9D8DE37F0394A3E35F42
-:1017E00090CAE6A11BE1F95927B37F4FCA4D85F096
-:1017F0003C90C196A069F9225E7E46EAE720279BCD
-:1018000009FBFD5D90DFD8F5EADDDC3E744C0C94FD
-:10181000433BD53F5FD433857EB2BABD05CF39AEE9
-:10182000B82EF2D129C8BFCD52713DB0F551E33C7D
-:10183000F21CFFFE40AA88DF5D1B8EA0F6AF3E15AE
-:10184000E963F62FE866BF33DA3239F731061FA9AC
-:101850008399193DBFB6DAB508CFE7FAC60B39331D
-:10186000E1BC2B95DBE779EE6E75058C6BA43F6EC2
-:10187000BEE95746EC20B5DE86792AFE392FF7A758
-:10188000325C4BF5F8AB7CFCEE023A5F9CA8075249
-:1018900067FFD7D9476187020AB337D46F0A82DF5F
-:1018A000B4ECD2DA23304D3593276A607D83CAE5E4
-:1018B000DF019D5FB6EF3DC27E7A303805DAA5F2D2
-:1018C000F8702AB3477F9FCAECD17752993DFA87C7
-:1018D000CF2267F7A69231F1A7C0E1027F533BBF49
-:1018E0002D95E14F8FF3F3993776F2FA02CE6B9C88
-:1018F00037BEF439B44FF1C6CF505F391F12E1DB68
-:101900005F70B9FA65AA88FBE9BF04FE2FB4EBFF4C
-:101910009C1A8B370A8FFD11F2E4A278A35BE6785C
-:1019200043898D67FB28FEE27975F758E644F54454
-:101930008DC4C721F353477048078EF7768643E678
-:101940008FD0ED1D08811E4EE1FAFE3B668F5BD401
-:10195000FE7BF01CDC7446B794CEC6F128EFC7BB03
-:10196000524ADCF8E6B1687BC7B0BDF5AC3DD97131
-:101970002BFBDD0F6157AC12B623E2C3F3D3D9774B
-:10198000A29D79FC2A70AAB99DDF46DBF92DB6F33A
-:1019900090D807ACBF05F7BE285FC3B17C05FB62DA
-:1019A0009913C34F8EEB12E1B818FEBD8776A08D58
-:1019B000B533C2BF407C3BBBCC250B3919481D4316
-:1019C0003ECE71F9381F958FF35C3E3E4C457CC28C
-:1019D000C6E1AE09C6FDE5C35CAF1EE17C12E3655E
-:1019E000A6BF95BF1FE187E7D873B1B8D65790B6A9
-:1019F000AC19E2966DB2D7E2192D6FF45F3EE0DDCF
-:101A0000FF05CC52B1EF0080000000001F8B0800E2
-:101A100000000000000BE57D0B6014D5B9F0999D26
-:101A2000D9D94DB29B4CDE1B48C226800D1A7009D5
-:101A30002106083A79F20A10111014617985F04AEA
-:101A40002262EBF36731213CD5E8556B5BB40B8226
-:101A5000628B3660AA8801372088EFD02A68F5B6F5
-:101A600041ACA0225950EBDADAF29FEF3B67B23378
-:101A70009B5DC0DAF67AFF3FDEDEC339739EDFFB83
-:101A8000FBCE37B34584FDC927BD923B9790B17E0D
-:101A9000A27A6D849C83BFAB82A555110849266448
-:101AA000995C655586D20165F5CEAA8184B4977498
-:101AB0002EA90AD3FFB604DA9FF69B9EBEA92CD9A5
-:101AC00049FB7B687B0A21C31DF4DF2221D7D5B4F3
-:101AD0008B6EDDB8E99F7E3C4F0D33CF4F124CB873
-:101AE0006EC30CD721673E9DC661726D253DFB35E7
-:101AF000C7CBB8DEA86CAF1447FBBD7986289B69BD
-:101B0000BFEB260BAA979EAB829FCB96C0CE91A52A
-:101B100048D85FE5FB1C2577CE0B778E7CFE7CB426
-:101B200093A82D749ED10A517786E95708FB8479D2
-:101B3000A2C3CF338DCF3386B079429FCFE0FB1A5B
-:101B400055127EFC083EFF34C78EF20402FBD964B6
-:101B500006F8E599D5610A1DB736021E52A4929186
-:101B600080AF280A3A731E2133E958139D6016E0AE
-:101B70009C960F8AEE5278EEA6E070E40125787A02
-:101B8000015E4B6C6A19B44747ABE530FF4849AD7D
-:101B900080F297667514E29FF80829206402A79FD7
-:101BA00009569B4F8CA5FF28349FEAB4B2B673D96F
-:101BB000F0FF67281F5F4688407CC2B9CBA0EE15B6
-:101BC00061FEE1CE43EF0AB4FF706DDC4929645C2D
-:101BD000BAF2710CAF8BB82F84CF6EF34F9D365392
-:101BE000CF736AE56E9BDB0A70381DED9E09FB6CB6
-:101BF000706CB63929BC5F75B7585DB4FD641C4183
-:101C00003876C5A86E7CBE9BD4B4D0763146A86F1A
-:101C1000D1C16FBEC2E05DAD30BCBD25A9D570FE9F
-:101C2000095675018C9B9C49F144E79D95D8B95C98
-:101C30000FF77A8EA7859C6E67CAAC5FE83EABF95A
-:101C4000F32249F0C4C09E6C873E12813F48F75F83
-:101C50003F13AD8F857F51FE293AA94C9D96447163
-:101C6000B6467499685DCE11C2F2E99D7CBF944F6F
-:101C7000EF84FD1227E5533BA50F393C7D7CC5FB66
-:101C80009747A0CB3C7E9E32781E66FCA59CAECBCF
-:101C900092DA4542C717717E0BED373741C47E0D8E
-:101CA0002E323ADC3C0F04E5CB03485F0ADB779E1B
-:101CB000B9EA21A8CF500E97C7D3E6E2BB93A6920C
-:101CC0002480878958B2104E5642E1247138D16D74
-:101CD00012A82FB3B2BA14BD84C4D132D3E15D3F90
-:101CE00008E0D768763969FDC3931F8A84D2D9D6B4
-:101CF00007CE0A84CA8BDD7E4212B3601E19668449
-:101D00003FD339A1E77CF49953D2D6A3A0B9F224EA
-:101D1000512D947EAF2CF44F22B186F1E41C9DCF5F
-:101D2000E6EFF008803F2BF1C45C8E64FC76BF14B4
-:101D30009C15E74BA5EBC279E42F8917CEA33ADCBB
-:101D400095641021F1FECE5FD461BBCD350ACF453D
-:101D50006CC06FC1732E43FED3F625DB3A1FBB97D1
-:101D6000F66FFB2ADA75179CDB5FF109DB0FF1D800
-:101D700081AFC54A17C877422CB83F13FD0FF86CE6
-:101D80006480EE3787EF1716C9D7ED9FF43CCF83F9
-:101D900062D521C0C72C2B5163F3503EBC02F5BE67
-:101DA00066DA81C2B14911BC1EDAAFE981796BB242
-:101DB000405E6F905CFD09D039D925503A1F41D75C
-:101DC000BD85CA1DB990D8145A971DECFC4D7727D4
-:101DD0006D8A11E0B94465212DFDBE6F040A875854
-:101DE0004775A542CF21F3F102051C8C179C0A9977
-:101DF000910774DB2112940F0E8487C63FEA8F8807
-:101E0000F0B115550D01FA2A9388C74AFB0B0E361F
-:101E1000EF95C42F92BE8007AA086859425C58DE2D
-:101E20002BBA3F06BEB1CA14AF74FF5693D5BB524E
-:101E300000FC55BD3E1AE15EA67C9C13946791E4BC
-:101E40001040EE630DAEE2F7977BE5CBC3F3D5DF31
-:101E5000827CF3372697995E9E9CCDE4CE017BE78A
-:101E60000C3DDFAF5298DC59C5C71189F1D9325901
-:101E700035C59F87CFD7F2719782F2017D4CC2F3AF
-:101E8000714B3C930793EFF236F5A2F09B9020B88C
-:101E9000400F976F9F2DF57606FBA5727DA7A4A82E
-:101EA000F1F130DF6ED7496F12681F19F57BD37BD4
-:101EB000641ACC3F9BCBCF009FF72FF16C1FE9BC7E
-:101EC0007E4CB04F0B0797CCF86EB864C2B9889BB4
-:101ED000C1458C19ECF7D175486FBE8E59C075DAC3
-:101EE000B3997CCCE6FBD2D6E9C3E51F95FB97C03E
-:101EF0003E27677AD3A1DFAB66B6BFD0750706D79A
-:101F00001D88EB2E61EB8E05390FFCEF3CF412C8F7
-:101F1000F9224EA763FD6E02760FF0B0A92028EFDC
-:101F200065A74FACA7ED4511E4FCF0E03AC3719D05
-:101F30007A86C73D29EA08D827B50B8AA0BD3D5B44
-:101F40004179F9662F13D94CF972765AF63D20364D
-:101F5000B57976F273B6673539E6507CC97EE2B260
-:101F6000209DD7A0DC2BE2F2A561B79BC0734F2F59
-:101F70002A3375E365FF1C2BB1E151FE714EEB4F27
-:101F8000F9A8C99F1DE70E8317AD5CBF828922E2C5
-:101F90005C8AE396F171A1FD6C0FEE8B81F93740FD
-:101FA000FF1F113291EB1B7A60DCDF58CE3B0DFE38
-:101FB000CD319DB4DFEE9CB986FDE073CA474D3943
-:101FC0008FC580BDD49641F500C8A9574494934D60
-:101FD0007686C7A6B46AA2B7474B1D3EF16398E761
-:101FE000DBB9642AC55F91C34D2EA1F05DC7F751DF
-:101FF000E4AAF60849D8FE6C149D6779FC250847C9
-:1020000039C74D2A72012E5E524DC7CB8A4F74D10B
-:102010007AA99FF8AECA87FE54CE0B6C3EA75D3FEF
-:102020000F698179E45C460FB2BF8500FC769F3C66
-:102030003F1C63724C06F9ADF125B5EB56001D94BB
-:10204000295797C5D3F9176DCFCA13E9FC158E76BA
-:10205000794E2ECA6D0FD0C7CE647565FCFFA03DCA
-:10206000378D78CD80F751994C0F4CA815BC9B2922
-:102070007C9A42EC849FC6333E2C0CCABB9FE1BEC7
-:102080000B353B41FD39D4CF63073F0AF0388F1D34
-:10209000BC059E87B183B7423B85D7E3F1CC0E7E6A
-:1020A00002D6A176F0B6EF03B7090A93A3D40EDDEA
-:1020B00001F3C6837103F6D11F983D1ABAFFDBF80E
-:1020C000F9D7D0B376005D4A5E89D139E3D3E19C7C
-:1020D0004FC79EA4FC92DB93FEDB28FD7B28FD9D71
-:1020E000A576939815999E7C17C997C50F32BE6F38
-:1020F00070EC43BE7B91F3451B5FBF2D47AC047C66
-:10210000BE4A4445147ACED794E176805C0FE53F11
-:10211000F55B233D973ABC1BF2806F0ECD75C1B6BF
-:1021200042F951A665F5C0E0BE8F031F0ED5C92741
-:102130002248C88F17E04398C73D10EC8C7849CDF2
-:10214000053E62EB7A0E89A82722F111A59B5380E8
-:10215000BF6EB800B075FBA774F3393CA77C76FA64
-:10216000FBD0CB1A4E1FD40FF91AE6EB1FCFE8674E
-:102170007604FFE21FF1DD7EC03FA03F99C1F4501D
-:1021800066BC938D234932E81755CCC804F942E761
-:102190003525D0F6B7B87F1469DEA8846EFE8B4A69
-:1021A00080F3DCC2E63D0446F6D09EF38E4AA0F6EC
-:1021B000479879D2B81CBF2E82BF90C5FD1292DB22
-:1021C0006D9FA4C07A599C6F7627AB8E041DDF14D7
-:1021D00071BBE565C1A89773BAFD7DC63F4909ACDF
-:1021E0003F99D73D6F56820E9E9A1D309BCB076D4F
-:1021F0009EFE9CFF9C090A1B5FC3C6C7439D8EAB16
-:10220000E0FE13854B2ECC47ACECF985FCA27B1489
-:1022100019C7CFE5FB12E2154DBF215C4747F2BB62
-:1022200082727038E2C1C5FA5FAA100DEF23711FE8
-:10223000956C1F850AC37B68FC20127E34F8276BDF
-:10224000E7CD61F3134F37DC46EBE92512DCDE8A7C
-:1022500063F6C5280E27D2C8E7099107774B1D56AC
-:1022600025CC39AF8D771AF8D9EE32CA8748F19468
-:10227000BC207C66221CF2D9BE23C5570AF87947D8
-:1022800070FB968E9B8F70B5B1FDDEA374B7D7E05F
-:102290007CE96CBEFA20BC1763BB83F58FE4F7D7EB
-:1022A000F37D5527748F5B86EB24B171A1F104ADEA
-:1022B0005CC2F7B73038EE565CAF1F1B971CDCC70B
-:1022C0001DD83E9AB57FDFF85B32DFEF4F82EBAE71
-:1022D000C1FDAAECFC81B86EB8ACC7F622B66E247C
-:1022E000F9118863E768E270BE12FC623A477C80AD
-:1022F000E44849E03545BB46D12EA901D507FAA3EC
-:10230000E44BD90972BA5CB479042A8F25A715FD6C
-:10231000E42889A8E0D7B67FF56347672ED67DA06D
-:10232000D75747155BC1EF5C9325B9401F16DF27D0
-:1023300031FFFA9409E57D85B804E7D9A76876EE00
-:102340008D063FDAA9382BA3601F56913899FF5F9D
-:10235000399E3EBF8ACBEB7DD64413CC372283C552
-:102360000BAE7256A3BF4EBE657EB44AFF63F25BEE
-:1023700045BD2CF371527A3D11B034FADB32D9707D
-:10238000461C847A01EDA8117EA3FF2D3B2B4EC085
-:10239000FC32D18DA3EB3E9F604F427BAA1FE97FA9
-:1023A0008EF28F25472016EA5F944BEE3D808731F1
-:1023B000CE6AA5849EC792EEB6821CEE67F6F586BD
-:1023C000784263BAECF2001B3E5066CD027FAB99B7
-:1023D000FAE7080735E1EA81413C598A540274481A
-:1023E0007182FCD55DDA589990C8F0F8498205CB26
-:1023F000125ED79E87E27D486234E37F62F57C946B
-:102400000372422071940E9792CE4CA0C7E43426FA
-:102410009F6A4D9D2950EF22FE94245A36344BA3D7
-:10242000C3F93F1B79FC6CAD29BCBDF44BF3980F8D
-:10243000000E12C40D2EC7B880DBD237183FD0EC87
-:10244000552D8E10C96EBD57ACFA18E61114DF3742
-:10245000D0BFA7FDEBC17D48E94C4E6BA5B68F9967
-:10246000898C7F1C895684CFDE3B4AC91C27E2E950
-:102470002CF029C5D3A12B002A59F314C0D32B5912
-:102480000FF583B89435EB8124E0CFD184D9A7E54B
-:10249000748C83960FD9DCDF24E8E4E1987EB3D115
-:1024A0006E2ACAAC477B6A7504BFF4C77C1F12A7AB
-:1024B00093129BDB943814E25FCBAC305E52AAA23D
-:1024C000A1DC1B988425B57BA544DA7F753AAB5F08
-:1024D000080FEF72F91069FFA3402F40BC26BDFB27
-:1024E0001C09303F7DEE91F382E7D0ED2F25DCFE15
-:1024F000CC894C1F69FB92FA71BACC31D2DD784E8F
-:102500008F39899ABF78D17477E462E82EF4BC637E
-:10251000B2968F1E4082FBD7CEAB9D9F9ED705E71C
-:102520002D97D8F9B72A6E15A6A0701E0CED3DCEDA
-:10253000650DAFF733124DDFF53C0F25F4BDF8F311
-:102540007C8779A7267E07381D18A93A409E342635
-:1025500053FAA4786A1458A9F58FE6786AE174FAF8
-:102560005DE444FFEF70BE6287F012E8C3ABDCC7E6
-:102570004A6199B2A2C1A076801FE701BD95E4DE51
-:1025800027CDA1F5A63BE6A2FC3C30B21EF7BDDA92
-:102590006EDCAF5626707C1465AAC87F8D9CFFCA7E
-:1025A00009F323B57E6DFC5CA1FC113A5F285F3F07
-:1025B00064536F06FA484864FA32E8FF75887AFF78
-:1025C000AF84EBAF91D69B0CF18F91DCFF5BFD6587
-:1025D000B6CD430F7A96EAB57F89FFF70D7D027E6F
-:1025E000527A8955EFFF355A4BB17D75863AFAF22A
-:1025F00024D0C7A2EB2E82F0437FD02388CAD630E6
-:10260000FEE0EA0CD977157D6E51C8E3B0BF52AA3F
-:102610002F21FE62515472C9C09E7EE13E6B29811A
-:10262000B8C959853C0BFED885CEF378A2D12F943A
-:10263000C02FE4F3A35FA8D4934E8CF79412B06B31
-:10264000A0DD3910E48E4ADC76D023D42FD4C9A77C
-:10265000B3D69B90DF43D7A372EB69A0A34685F165
-:1026600071A83F28723ED7E46C283D943B18DD44A6
-:10267000D1AD9B99DC782E31B9275D7C77F934AFE9
-:102680000C5C806BC9CA03E0AA4D09F825707996E5
-:10269000273AB15F956D47233CD7E60FC50F3DB98B
-:1026A0000AF174B06758FC86DA6BD48E32537B6DB6
-:1026B0009D105C7F358777247CAC067D1D868FDE80
-:1026C000EE966BA171A29B8CF72F8A872415B0B868
-:1026D0003E09037F91DB496B28BFC0FDCD6AB3CBB8
-:1026E000A1009D6614BDEB067F3E43C6FB0822D5C4
-:1026F0003BAEB6F73CE71A889F85D9DF17890908F2
-:10270000576BBAC9609F1172A7C17E8C746EC2F7F5
-:1027100065E6E712009E397A78869CBB4CC17383CC
-:10272000590FF3C69A5CC447F9223693B85060C576
-:102730009A300EABF1B9C2F95C930736858DAB4C7C
-:10274000EACBEEF7449B5FA4E75F9F44ED693A4F05
-:1027500083BA0FF5AA363E8E9FDF3692C51B6D7683
-:102760009FA28481C3BD9CCF239DB35995E2CBE842
-:10277000FEEE5598FD2D8D345579311EC5E2B50A12
-:10278000879D589C6F05BB7D54523C8B7BA93B15A4
-:102790007DDC4AE4FB89B1D3FD9C474EAE0DD94F99
-:1027A000544E6719EC5FCA529578DDFE4B9234BDEA
-:1027B000D281FC1D69BEBBB99C8FEAE7C2F8ADD5DA
-:1027C000E6F2C1BD56945A5D0062313AC745E6EA69
-:1027D000DAA3D58221161D1D3667C861EF236EE787
-:1027E000EBDB25B50AC6D91589C03D999DDBCB9198
-:1027F000E68DB48F0BAD372D89E9D31EEB39C3DBE2
-:10280000157D9218FF49237756819C260325D23FD8
-:102810008C9E484862F22556EE7482BF4EE9D11D67
-:102820006E3E9224737EFE37F187667717B71ECA15
-:10283000A6FB6DB0492E01E457E1C90EA70E3E5428
-:10284000AFCF4AD2C97DD1E646F9263AD9BDFB6859
-:102850000BF3B70F8C34DE93CDE7F8FA80C33192D7
-:102860005C28E2F0F8779DF3BBE2AF2489C97D0DC7
-:102870002ECD001702FC757F6343187949E1D39090
-:1028800094FCDDE1B396C3E5E90BC067D07F183E49
-:1028900017E2EB209F79C9F130706CB0CB69730DF2
-:1028A000FCDF8C7648B87ED5BAF346E2438D3E20F5
-:1028B0007703E1D0AC1AE2027292A783F995371B35
-:1028C000F59CB8C4C5E533F996C22D9EF78FB711B4
-:1028D0005F4C6C707EB9CC184F684BE27181281246
-:1028E00005F039EB9A24409E82C53463B0920D4BBB
-:1028F000340BA02752609E4184DCC7E567A81E4CBC
-:1029000056999FDC9BD40B4CAFA4E3FE92F83E4259
-:10291000F5601AF56B201E0347047FBA37AD5BC123
-:1029200006212ADE830B1E13FACB0EE21560FE741D
-:10293000D289651F4845A0F367910EA11FC5DF7DB1
-:10294000E5D583417EBF13728E0BD9A35AA9D91F37
-:102950006BFF43F0FEF47F2FBC5796EAE02D267FF5
-:102960003F78CFE77227349E5704F1BC2C88E7F9F3
-:10297000F6039FCADF32FBA3FDEF32C6F71AB35846
-:102980003CAF5CAC7C18EF419D32BA1F524EE77AE7
-:10299000C873D2EC4ED4797D83713FEB99FB2588C7
-:1029A000A310E924C209EF869C28CF329351DE3070
-:1029B0003BE22ABE7F396B9E15EEBD83FE934F64CA
-:1029C000F606B397644E07458E12F45F1ABF3DBFFB
-:1029D000DD71B17ED25EE900DE5F6BFE51837F0E5A
-:1029E000FA4BA1E37C92EF7D38BFCF2F3B21DFA4D0
-:1029F0008DDF8BB59D396888D386FA419A5D751550
-:102A0000DF7FA9DF7DE872B8DF52E61016DF647061
-:102A100090F93A8D8EB3780FFEE2B726F4B7CE72F6
-:102A20007FAB08FC2C3BF377AAED3DCF392139BCB5
-:102A3000FF04E320AFAE54F18960CF69FE13B43BCD
-:102A4000ED3DFDA7D116FF6BB0BF09AF89981712F6
-:102A500009BEA17E53A8FE999ECCF4CE4DC9DCAE32
-:102A60000B81A716EF0BBD976ED2F84FF2087AFED6
-:102A70000F5D5FDE3706F74F145D3C363B184F1491
-:102A8000540FB9252F183F0C13375C0A74A8C50DD5
-:102A9000353DA6D1B185F6B5E23D73F878625BD6D7
-:102AA000C1BECC2F7C2911F8B35C6171236D7FD43A
-:102AB0002FBC2D59878F223FD3DB96FF53DFB9926E
-:102AC000C297241017F30FEA9D565AAF5048E23AC6
-:102AD000E4331BE669152509C877922F0AEB15A781
-:102AE0005CDE285AB7EC7B45149360BD39244A0854
-:102AF000D28F96D7D1E8FF703DE0EFEC29C9753E43
-:102B0000BFBB028268063F293A884F946F0986FA54
-:102B10004392FBA164B4177B05C789900F966DC8DB
-:102B20003F7B46527F0A709D6A551FC6FE3F3CBCE4
-:102B30006F4FC678F1C17F0AEFC175983E009B8D3B
-:102B4000A4E9D6B3D1C661B08E93DD176A71E9E509
-:102B500004EF63B601CE20CEF239F1429CE505F3D5
-:102B6000CB22E8A3263ECF70D2EC94FBB2FD42BF4D
-:102B700027B73A36015DFC2E390BD77FC1E6DE3030
-:102B800098B61FDA220D86B84D83F3192BE4CFEEE9
-:102B9000DBDA94DEA9E3BF434FBAFB84F30FB592AF
-:102BA000FEC5990AF15CB1AC54459303DB45A8F727
-:102BB000B0CFB6B42AB0CE935BADD3C2C535C41482
-:102BC000C6EFC3B730BB76748EC905E2AD8878A472
-:102BD00004B88F7111978F36C40CDCD9813670968A
-:102BE00088F71AB4BE3F96D66386AAE81F0C18B8B9
-:102BF00013C70FF8BCC4C5F2283DB63C5A5F9F53BB
-:102C000032741DADA747BB3F06FAA27AA659427D92
-:102C1000DA1203790031032725AFA3B51881548553
-:102C2000B373FF9ACCECEF27CD1A5C25CC83DCB7CD
-:102C30005546FE3A9426E2FD1385DB12A8FF252DAA
-:102C400086504A2465AAA70CE0584E5A1AC09F2AFB
-:102C5000735EFD522CF927E097BF5301FE5F1FC141
-:102C60000EFF1DDF1F0A114A3F07B7345E47C2E45B
-:102C7000516B74F85C8C2AA5D0FE6BF9BD2E714C9B
-:102C800042FA898CEFBB98BFD9E26B88A6701CBE54
-:102C9000BDB9977EFE2310744DEE896FC87F2697CD
-:102CA00043FEAD1BF3691B4E9A107EAFE60A5E81B0
-:102CB000C2E7608E486D36BAAB7E566F7F5ADFC072
-:102CC000E9B872FBE1C65EC0C22949B8EEAB398FE4
-:102CD00059597EEBC5C7AF87503E5804F953141FAE
-:102CE000A39468AF93E26B314C41EB2315ABD7470C
-:102CF000D76BB77794C6D1255E48165C9B815E7210
-:102D00008802F2035D1013439442EB2032909E92AE
-:102D100008E673AD2FC8DD0C71B175E9CE16C83762
-:102D2000DC33D08AF966A1F9C47B84FA97E2212EBC
-:102D3000152FA0BC3E98F33BBCA73B986E2140AF3B
-:102D400098F04B9F3726303E8DC937DA9FE52959D9
-:102D5000DCCF261E4B41705F31FDAC6A1425A49771
-:102D6000E3D9F843FD042FD0DB2127970FF4BC5B98
-:102D7000C120929AA5A90323E3F595FEA39C9A5D31
-:102D80002C68E734F53CC70B82774D369C63003DD9
-:102D900007ADDB73045CDFAEACBB916059B800EEED
-:102DA0003143F7BF2285F9473225BB1C906F2D6B4D
-:102DB000C6E8F363E4C21B27D862318F09EDCAD499
-:102DC0001C01CF33E624BBCFED919FAD10B76CC093
-:102DD0000FB53A5282F3C57CF9EC4F20FF775CA126
-:102DE000E08B82FDF0FC66FA7FEDA05FE47EB359D4
-:102DF000FE75CE263CCFD842B30BEE72C6DABCCD00
-:102E000025B4FECA2712C6B3C7F51B85F9D5A1EBB9
-:102E1000AF53886F3485EF2BB912C23BEA92C7706B
-:102E20009E37734D286FC6413E36E42FEBF3AA510F
-:102E30001F1AF3B9C7891FA8C5D0EC62FC4A244FFA
-:102E40002F90EF131C46F8D94F1AEF8B2BF32D86DA
-:102E5000FAB85C39440F7B10DE2F6730BA7879807E
-:102E6000E0DD9C15A4B3B12713BC4067F02716180A
-:102E7000E06838678C5F56017E87063CF15F704FD3
-:102E800012E35C7D23DE8373F86B7412C3F16E4F23
-:102E90007FEE27A0A734F887D2C1C5E3FFEAAA6274
-:102EA000C07FBE767F1F82FF107C630C523B47DFE2
-:102EB0009E78C7F5B37AE25BA3831EE7BEBB754D70
-:102EC00036C5EBAB76FA00F0BC49F6DE2504F174AA
-:102ED00041BCF62B46BA59A734DB40EE475D72DCA5
-:102EE00006FE814617446CCBD7DBFBFF2A7C976C30
-:102EF000109833E912BC10D77B0B1E0D0BAEF352AA
-:102F00004A77BECC4B20F74915CBE36850F3D87B0A
-:102F100057F94C9F86CA873FA4B0F73ADACD2FA75E
-:102F20009F2F4FB5D2E626703FD600F976F47CF29B
-:102F300086D9F046039127CF46794936082C0FA150
-:102F4000E8F728DFE739BCAB8430EBA12583FB74BD
-:102F500032BBBF2811FB93695A5E52D507B8FFC92F
-:102F6000AC7EB1FB7AE35FB4AFA3945688CEFF9CEE
-:102F7000C8E3F29ADD3DC1C6F20E271489888F3767
-:102F8000B7085ECC8FA4FD3C944E1671B29DC8ED7F
-:102F9000C0B385CF340D76823DA81AEC4EA1A81D92
-:102FA000EDBEB842A33F18AF461BF09F383AC15060
-:102FB0004FAEEA65E89F3A2DDB1857705F6A78DEFE
-:102FC000BB26CF50CFA81F6EE8DFE79612433DCB5C
-:102FD00033D6D0BFEF9A49867AFFE6EB0CFD7FF43B
-:102FE000F01CC3F301DE4586E7976D5B66A80F6CA6
-:102FF000B9CDD0FFF25D77199E0FF6AD333C1F724D
-:10300000E87E437D68C7CF0DFDAF7877B3E1F9B0B7
-:10301000CE5F199E8F38B9D3501FE9DF6DE87F5519
-:10302000609FA15E4C5E33F42FB5FEDE502F57DE5D
-:1030300037F41FE5386E783EC6F999E1B94607E3E3
-:1030400072BE30B48F77FD2DE43D9D2A16E780785F
-:10305000405F78D48C65346961F73AA403CB850569
-:10306000EEE254E08F473D4D9090D4E0F1FF11AE79
-:10307000A6DF2CEC1BC7EC2795E8E5A7969F4AFD39
-:10308000164F142585D800A5DB2194EE0202964A3E
-:10309000804AD64488F74461991048C4F6C4403C3D
-:1030A000964981DED89E1C48C33225D017CBD44028
-:1030B00016968EC06558A6050660D92B3004C7F554
-:1030C0000E0CC6323D3002DB3302C3B0CC0C94622E
-:1030D0007B9F403196CEC0382CB30263B0CC0E5CDF
-:1030E00083FDFA06AEC6B25FE07A6CEF1F988EE5FC
-:1030F0002581B958FE28301BCB9CC0622C070416D2
-:10310000627969E0261C7759E0462C7303B763FBAC
-:10311000C0C0AD580E0A34607979602596AEC07A89
-:10312000EC3738B016CBBCC07F61FB90C07D58E651
-:10313000077E81ED43033FC3B220F0189657043653
-:10314000615918F83596C3024F62393CF00C8E1B5A
-:1031500011D8816551E0056C1F19781ECB2B03FB3C
-:10316000B1FDAA403B966AE0356C2F0EBC826549E2
-:10317000E0F7D85E1A388C6559E07D6C2F0FBC875C
-:103180006545E03896A302C7B01C1DF80CCB318111
-:103190004FB01C1BF802C78D0B9CC1B232F0376CCC
-:1031A0001F1FF806CB6E7917315FD96D427F96FBF2
-:1031B000A991FD050FCA49337F2F0E72AB31FFBFB6
-:1031C0005EF062BC30A9F325A89B0B2D182FBC81A3
-:1031D000F8F13D81FF269D7690A7EDC34EA443BC38
-:1031E000E9CD645F863EDFC1CCE300E5E22909FC5E
-:1031F000D50949FB92419FDE409B21CF88A8E7304B
-:103200000F7202CF83BC41A20E16DDEA61986118ED
-:10321000F6F359687D462551F368FFA661168CEBDD
-:1032200037E5513F88967767B17CD91DA94C5FFE81
-:103230008A97BB52991DEB2960F7FB336EECCFF8F0
-:10324000A92CF1027E1383C3DF07F23C5B9B3F1383
-:10325000F3632F72DC67297C1CEFDF9C5AD5960A3A
-:10326000FB282139F5B6603FDAFE6284F67DE1DAAB
-:10327000F799183E3C4744EE2754C54D3A8F9FF0CE
-:10328000E68A8E4B5FEA1FACBF15C10F256425EEA1
-:103290003776DF2795D7527D38B1507451C9413EFA
-:1032A00058B16BE447FDD9BA909FE92911317E31BD
-:1032B000A3E8F081445A9FB13C1EF3EEBBF7556280
-:1032C000C6E7131C472E7D891EFD86FAE7477E64FC
-:1032D000888BBAD1EEBA89D32851CD7FEDD49E2305
-:1032E000BDB2B8EF4DB0B813E49F19E7ED50CDDE95
-:1032F000F3E5C710D5425403DD3378AD87FD83EF86
-:103300004FAC26583796F7A17045BDEF8995BD0D96
-:103310000238EFCE38A0BB985C3F395F7C19E029BA
-:1033200061A242A70DEC9848F04C7030FA8B2B52FA
-:103330001D1E8A9FC6BF8B78CFB53FBE4001FABF26
-:10334000C7D62F15F823D9C1E2278DEDEF617C2B6D
-:103350002EDF4F3C36767FEEB4401CDF8AE5AA159F
-:103360002E2C1B571462B92EFD7E2BC44BC464094E
-:1033700032814954C63C8C0769EB9BE3E7588B5D6F
-:10338000946C1D722584904488330C87F736E5CA07
-:1033900095FD08F92695E57DBFE9F8C806FCF04DD6
-:1033A000AA13EBA289DD1BC7E4FB54C84B88712923
-:1033B000259233D88E7F49D8BE19FC913749E786CC
-:1033C0006B008E2A7B1FA381BF6FDA50DC9FC35531
-:1033D0001B1782F7103C8BB20BEFADC568DA3F3795
-:1033E000325E0738E2719F405F12A52F3FDF3751F1
-:1033F000634C309F86DFB3921FF3A91A84F079974C
-:1034000043387E1A155539DF3D0A51A4BFEAE5A9B4
-:103410002D7757083DDB50BE621DF2B9B8BCDA9F6C
-:10342000AA0E73D0F9C75CC9F3EBD313500ED0F6D4
-:1034300001C3219FCE44153AC02D41467EA140884C
-:10344000833C5F6275C64D3A4F1EC4DA150E553285
-:10345000C3FD80330EE0B5969F0FDE50D6CB817F43
-:1034600057BFA0BCF022DD86F66FD1E4408215E59F
-:1034700093C8E1A18D5BE860F2D8945D35D33194B7
-:103480008D033EA27537C08B58697D20D6E7E07367
-:10349000A5BB3E0FEB0ED61F13692E420ED3718BC8
-:1034A000719CD43DCF52ACDBBAD7ADC37593BAEBA8
-:1034B00037623D9DF5BFD875B4B2FBFCBF6372F2B5
-:1034C0004B498D4BA0F43CF696B955A00AC6DFB225
-:1034D000B0AA8CEAEF3FAE785705B9F40195278D75
-:1034E000B41C3B607F22F839E387EE8F71EAE8F580
-:1034F000061ED76CBBC53C1AF45DD1AD62D51684EF
-:10350000F74AC3BDCF1A8799C79BD83E664884DC6B
-:103510009100F2F7F0A58D06BF93F3A1C2DABAF7D6
-:103520007B9B80FBFDA09EC9DB0F960B286FBBF930
-:10353000349E703FDE970C709AB95C27B74918B873
-:10354000D45B88DB20D723C18790BFD2FA97B67EA1
-:103550001897A5969AB52A8C3ED3E014090F3744E4
-:1035600088FF6A70D2E0ADB5FFE98E210AB3ABBD2A
-:103570000638CEBA7328C62B6FE0F17A126FE5FCDD
-:10358000C9FACDA0EBECCC457A7202BD433D6C9EEE
-:103590000D5F7706FDD71D79178507CC97FFA0FE35
-:1035A00080DDADBBFF0C857B443A8C00EF3A0BC14C
-:1035B000F72AFC5BED2C9E94340DE7ADE1EB92A471
-:1035C00019B88F1ABECE4B7B637C26B887DA6ADFC8
-:1035D0000CFE705789276522E06BB319F3DAEEDA37
-:1035E000BBFEC82FE03E789319EF4E167EF14001E6
-:1035F000DCCB76713D4615413B7C47C14DB43F5510
-:1036000080F91710367F97760FB2350EE17AB26CDB
-:103610004BD3085A76EE595A09F197137BC71F040A
-:10362000FF79613491D2C0DEABDF21233C3CE68FD1
-:103630008C768214AC8B3DEB0BA0AE8B232DF49AD1
-:103640008375FABFC5DB8C753DBC4C7A7839CB8C61
-:10365000F072961BE025BC68F7893A78959D792928
-:1036600011F4FB518713E7AB39D39802F0A9D9B312
-:1036700016CBC5DBA23C1FE9D65DDA126FA8D7EDE9
-:103680004AF3E8F5CBD9438FC5C2F9973944CF4700
-:10369000547E9C5AA136001D9F5E31BA414FCF4BDC
-:1036A0005BB23C36C33CC6FAD96601ED14D0339305
-:1036B000CF632F2E73C8B8CEA7DB98DFF9E90AAB2A
-:1036C00007D639B542F1B0751D1E664F31782DB958
-:1036D00025C6F3D190E0FE22CDFBAFDE1F21ADE485
-:1036E000B895E0BB3BE7CEA3BF23F28BF4A58CF2E9
-:1036F000BDCDFC17A01B2BFDDF398CA74A58D7E6A0
-:10370000AD6B113D90574CC876C37A749CF3639DA2
-:103710005D10593F18BF373102626228A7D97D88F2
-:103720001BEE43E87C5D926D0DC413B4FB903A58D8
-:1037300088F65D6AED94DDB4E9F3D6BEE77DDF9CE3
-:10374000E2290BF4738DB55906A55BD332A00CF8B2
-:10375000E9F3D68614B067178B677F1CEEBDAF29DF
-:10376000699C6FBD66BFD16FF46AFBCC920C7C463E
-:103770006CDDE7A6F55311DEF399C5E7ADDD7EB844
-:103780006204DD7FEDAE3332EC2339CD3D2B2D3994
-:10379000787E81DF072DDA760CF9FCA4D973C9EDA8
-:1037A000E7B3F37BECD3E630E41F7A4807F0E79CFD
-:1037B00042A231ECB5EF5379F3C96B6602F788E4A6
-:1037C0005BDA8B3ECFE44FE791AA5880D79CD6C5F1
-:1037D000287F3E7976DC419687D45C00F4F139315C
-:1037E000E1FBEE9F93DFC50ED1C16F5D9A9647C98D
-:1037F000BE73A3E5B9D00DA6619E7A4D5307BC3FB9
-:1038000066219287CB25817DB7C62BA0FD52C3DAF6
-:103810003DC4BA12CFB186C9230FFD0FEAF39B8DC9
-:10382000F269C1C3C67A3599940279DED50F982121
-:1038300093882CD4CB3F0ABF1BD398FFB980D437D1
-:10384000815DF788CCF2BBE72844EA4DF5D1D2E799
-:103850001E29984DEBF7A5317BEC53EE6FC07B8CA6
-:1038600069F4F9A25BBCB29ADBF37CC75B874C1DA1
-:1038700041703EE63F2DD2EC57E284787E6FF857D8
-:1038800076E4F3F76E15F1FEA937B4EBE4F3DC351B
-:10389000C6F35DE8FCA1E725E47E3CC7A26D57A313
-:1038A000FFA69D47C397761EF3B6F0EFFB6E4B1352
-:1038B0000C76DC2E0E3FCDFFDE1352DF97C6EC7A7E
-:1038C000ADFE72485DA36F33E76F4AF77B80EE97DA
-:1038D0005AFD158C4E3A65FDBDA81CECB72F6D68DE
-:1038E000E47E16CE2FB4DFCBE7EB17159CEFF57017
-:1038F000EB2E7DEEA967C12F5DF49B0763E152E8D3
-:1039000013A93905DEB758B275552CC0E9A4E4896E
-:1039100005BAF9C42B8E0E072F532F0D5EAA4DA0AA
-:1039200078AFD5E8BF68E504D0EF7FD96A56C03FCD
-:10393000ACDB66F1C177986A5B17E2BD0DAD1F6322
-:10394000F5D5F87E65DD2EF3877ABC2E7AE2C114B8
-:10395000CCF3209EDEEC5EDDD71B3E2154BBE5CFD1
-:1039600015E02FD7113FD273E838583F9080F27A94
-:10397000B61CD7F3B9163FAD634DA4AE75FD1988DB
-:103980009FD6B58E39017C5F47A40FF5F4540334FC
-:103990004DFD962FD278FEDD15E40A902F1A3C8853
-:1039A0003719E573C3933F1D748CEEE7D496D76245
-:1039B00005BDDFCAEFDDCFB6CCFD53E279F4C369B4
-:1039C0004AA7FAF73234B9EBDC4537904AAB6DAC15
-:1039D0005C62F6C58EA0705DB2C98CEF892E79EA63
-:1039E000B1C77F0EF944EF59F01E64F153078E0CF6
-:1039F000A7F5C53BCC4995EC1836B817D6F0524719
-:103A0000FF07F7141A1E163D734086F768A01DFCC9
-:103A1000040D1F8B77B4CB64604FF895B6B4CB9D83
-:103A2000B6307869395681EF1B3DF9B50C78FF64E3
-:103A3000AF4052B37A8EAFD97400ED188013E29183
-:103A4000E3A91B6F3DF0E59BB03B1FFB2920B72F7F
-:103A500084AF77B85EA574FDF46EBA8F9A3F585C58
-:103A600000879AA76F8A85F39C90EA197D3FB22A56
-:103A700005F2DD6ACC9E14054BD65EF3E8CD48779F
-:103A80000B0EDF9CC2F20FD5349EE79106E79CBF78
-:103A9000710A9EB39AB891FE6A1E11AB201FE62BE5
-:103AA000898CDE11863F6EE3FC716233452E3DE763
-:103AB0000990973ABF477BBFF9E6EE7808BB8FFCC9
-:103AC0008ADF4756F53219F44B37DD6E598D72F5A2
-:103AD000D30C3515EE29291C34398AF2553C5C9EED
-:103AE000CAF0C4E4318EA3F4570AEDD0BFC38CF7FB
-:103AF000C3BA715C7EB2F597F3F5E9BEA3C11E3976
-:103B00009112FEBDA0C77B09DAFE3A888ECE747C86
-:103B1000CEF87ECB5AC6E71ADF7BAF1E0DCFBF7C37
-:103B20009BF1118C037D44F7E54BC5E7ED930594BC
-:103B30000B16E20BC7DF5BCC9CBF8DCFA9C58EF601
-:103B40009C462774FF127C972C482F749D04C40355
-:103B5000DA2BD50FD0F13A3BBB0ED6C57E72B03D05
-:103B60002BC8C70BB83CB8B91795079705E501D91D
-:103B7000987C51F1812566EFE33F07FEA5FCEA71D1
-:103B800002FF9AF1FD9BCFB6EF3F721DA5F3CF5A0E
-:103B900034BE35CAD350BEADD97933C60943F9F620
-:103BA000B3F47A12966FD3F9FB73A17C9BDEF91FF5
-:103BB00095A71AFC1E09811F958FBFDCED8C0CC7E1
-:103BC00050F938AC9733AC7CA47F6F93829E74A875
-:103BD000D19F46778B7EBDB40FC8A16EFAD4E8AFF3
-:103BE0009B3E35FA0B3DAF117EA1CFAB21E9496772
-:103BF0003F98EF221E3BC5B77F8F88DF4DEA72FAF0
-:103C000063210EB42A8ACC023BBC4BE1F57856F70F
-:103C100027CB4D2027B4767F148BAB7555F963E322
-:103C200075F6F5B1363116E2BC9DDEF0DF79C3CC16
-:103C300044BA7E6784EFC0697189AEE8D841B85E46
-:103C400074A617F0552EDA326F81FCD16611BFE7EA
-:103C5000336FE5B5B19027D2D5D677E234DA3EFF9F
-:103C600015FE393F8F2AA55138CFE5783F493C0FE3
-:103C700015D1F3CD6D63F6F3BC0DE1E944BB3FAF65
-:103C8000B62D97411E51BBF5437DFC6811FFDE4206
-:103C9000CDC690F6B671484F8B42E8C9CDFDA3134F
-:103CA000BDB87E1E4C0673FFC4A4CF0B2917732723
-:103CB000C23B1E5D8744CCBB3EDB26922638E776AE
-:103CC000C14B80BF3DC94897B5547EE8E3C0A7808B
-:103CD000EECEF33EDDA9DFFE77C1EDB4CB9267DF18
-:103CE0001FF40B5A9E7AF6BD4B5E80FA734733DFA2
-:103CF000273DFB97EEFD6626C8FFAEBD1682719587
-:103D0000BD2F67DE0EF5DD16CC3FEABACBC2E2C1AD
-:103D10007BED984FD795C1DE8B69D8F3F520CCDFCA
-:103D2000268D88B784DECCEF38DBF6B73FE27BB672
-:103D30006DF454A06FF7C6A03D5EB73BCA0B4E6A48
-:103D4000D79EAF0BF4F718DFF73CB5328BE377D98A
-:103D5000C934887F75C5B33C9BBA17863DB692AE11
-:103D6000BFB4B55D86F7774A5FFCFB2090375D3BBB
-:103D7000991D71DADCF928711192D1FB8EBBCD143B
-:103D80005FA7C1B6A3BCF27CEF3DE3E19EA3275C35
-:103D9000181CBA281CE05C142E35202723C123BF31
-:103DA00037FB4ECF0F0F1E6766C2FA4BDAAEC07BF1
-:103DB00088205C0495B5DBBD5601CFCFDAF77E3D98
-:103DC00008E4F1672D2B51BF5FE8DCD7FC60E9E028
-:103DD0009F3DB7E0BB98732FFBC19E9BD17F00F442
-:103DE00053724F3EE849E7CFFD18EB4FDB5DB8DF7C
-:103DF0008BE4FFFBFF5FA3F79D02E6B15C08EF3B9E
-:103E0000FED7E2FD158E77BB02F9125D7BFE9E495F
-:103E100074E7BFD0B93B7EB0F83EFFB9353BA8C3CD
-:103E200054AFE4D3FDBD479AA764D1F22DF58B249E
-:103E3000705B2D91EE6BD2995F611158FE3799221C
-:103E400068F1A50E43FE537A0DDA1B13D4BBD97764
-:103E50009AA4FA0EC83FED2899EB5A873DF2F0BBC1
-:103E6000021D9347F2BAD1DF7A5320AA40EDDB0955
-:103E700025E30E81BD375115D11EA425DA81EF64EB
-:103E800056B0F642A39F313DC43FB8769AF1F9147B
-:103E90003EDF54B24CC9A7F09A9A2E295E0AA2E9D5
-:103EA000C5F56638CFF41B04D2AC8B6F4E0999EF81
-:103EB0000308A0E9ECC8EF0ABFBC74E6775A846532
-:103EC000080F522CF2F78D2E003FC2E0DD31793021
-:103ED000CB33965C0C7E5397BA306ECAFD50331FBD
-:103EE0006FB6ADE900BE3513A3FFA9F99191E04C7F
-:103EF000B85F8AF36407E16E5645F44B75F3213CD5
-:103F0000347C7C573C68F8FBBEF890D289E15E5562
-:103F10002B175A672F867B082BE4BDD379276E6059
-:103F2000EF91587305846355A119DFE3FAB3A9AA89
-:103F3000000CE7CA2157D4DEC6A675017C1672387C
-:103F400056937AB43BC9B7E7CE1515E0AD1FDAAD8D
-:103F50000B5542C653BFA4BA48F045D3F32F9088FF
-:103F6000272E0FE2A002F9501F07F51AEBF0776534
-:103F70004A709E0BF58F241FFED5E59FA83CFA9052
-:103F800022FD1894983F4324BDFF38AB8DC1B16E1C
-:103F900089E0CD463AF299F5F7C04F70BAFED31DCD
-:103FA0004350CE15DF3B308EF9B5F998D753C7EDA6
-:103FB000FDB31E671CC473CEB6F58D8378CDD9438F
-:103FC000A5B1E1F2790E73BFF2F72BAC58769509E3
-:103FD000CD621CBE7F3201F570591401B9133A6EDF
-:103FE00075BA1697A997318E4F583E7E353FC70256
-:103FF0003A342E4187B70DE33F9106F5C403FC7DAB
-:10400000A8BB57F9BEF0053F16E07A38AAB322DC08
-:10401000770A7FC6E56AE5BE6F64881F4C6ACBC22B
-:10402000EF4C4E2A33BE0F785F3AF7CF879021B01E
-:10403000AFCA7D636287015E0E89AE280ADFBAB619
-:1040400033B23BCCFD5C283C617E88231F37BBAA82
-:10405000019EC7EF8EC2EF00BCC1EF8B72F9F72152
-:10406000E11342103FDB9CCEEE21BE4E6771F46B34
-:104070002A8BCDC974DDDC566530E497F5E2FDBFCF
-:104080004E77E2F3DE7C9CD6AFD712D6EF98ACD455
-:10409000863B7F4626A39F05C4F5E342E18787B7A9
-:1040A000E27BED3E783FEE6C99C0DF9F09A56B8205
-:1040B000FC7176B4E005FD0B7E2CD62B05D4FF6F8A
-:1040C0006879159398BED4E83E14CE6F71FAD5D6B0
-:1040D000EFE2707F9BD38706670DBEA1FBD5FA5335
-:1040E0007975953EDE3271D7E0A7C13EA96D1314F4
-:1040F000139DAA56EA94810FEB76DD6786FB85E96E
-:10410000FC775A885435487FBFFB75BA84F3EDCFEE
-:104110001B81F6E3171B987DACCE3B130B76D01BAF
-:1041200026D75B23801FDF140DDF370F2DDF5FA144
-:104130002C2A33EBE7CD627ED29262338487AE5F66
-:10414000D26E4ED5D1D3D7908F3534D8DE6B89134C
-:10415000F318E97AB80FCF3D1602F94BB92D1D259A
-:1041600031F4F9F5F5F18C0E6B5ADA65ACB3EF0D5D
-:104170006BEB69EB84F2D3E4CA18437D6E69673A4E
-:10418000C0A5D2E25BEE0A43A7F76774C755BF9B91
-:104190009E5029DD0EFAFF414F9CA908F73DD4D966
-:1041A0001C6E3AFD901A4E3F2C5BE94C05F82FDB54
-:1041B000D337159863D92BE529E1F4C33B2BD8FD00
-:1041C000E1519E7FD93599EA87CB75FA617214D295
-:1041D00047E8B87119DA77552EA01F347CFD87E5C2
-:1041E000CC3BA01FC2F0F5CC0CA37E98DA361BF5B1
-:1041F000C3D4C92271EAE27153322EA41F8A53A696
-:1042000063DDEC8A094337EF70BF04E00A25AC0395
-:104210007AE2EE0C26F743F54524799E7DB1F2FC57
-:104220007F08CE9A3C5F3685BDCFDF930E09CAEB7F
-:1042300065D305FC1D93657B983C5F76038F4B86A9
-:10424000C8D72A90AFF97AF9CAC6D7BA993EA8DB7F
-:1042500095F5D319F4F975CD669795F6BF2E286FAD
-:104260000BF4F2F6EE0C498373A61206BFD366C4B4
-:1042700010A7515EF50339757CF0CBB9CF00DDBFD7
-:10428000C1DE37FB33D7E3AF0F7E391FE2E91FF101
-:10429000795B33185E4EAF208BCA281C4AE7317B0E
-:1042A00078E97611E150DBCAECBCDA6D02BED75B6F
-:1042B00091F70DDE1B2EDEC3EE0DE1BBBEC53A3C11
-:1042C0002E7EA3B3A9373CDF24E0BD67B56B317BFD
-:1042D000FFEF611627B6D2FF205F626D74EC668235
-:1042E000793A2AC69B9772B8555AFC07617CE51348
-:1042F000826B13CA35637C7A69BFB19F807FB078C7
-:104300005B48BB6B2DDE672C85B8B3CE1FF93DE74C
-:1043100093F9A22FF719C80F7C4B0CFBBB675ABF50
-:104320006E38D47C4F381CA670C8FFE7E150D776B2
-:104330001FE6DF7CDFF3BF93C1E3ED79241FF8E5CF
-:10434000CF2615F9DFF3AA88EF17CFBBAF7FAA3EC0
-:104350004FE93887C31B2677531AF4AB65EF212F3B
-:10436000D8B8E300BC223EA3850C86B0FD82878DC1
-:104370007AB25B2FB73A51EFCEA8DF21C077FDE7C5
-:104380008B047F0F6C6E9EC50DF7AF87A3FC28CF03
-:10439000343AB467B2DF8F8BC964EB1EEFE52F436D
-:1043A000BF6297A0209FC07735A04EF100DFD5D81F
-:1043B0003FECEB0A0E778CCFD4ED6278AAA378019C
-:1043C0003EABA0F62EE891EBA9DEC1FBB2B6763388
-:1043D000F4AFA1FD1251EEB8D0DFD5F413DCDF1538
-:1043E000A7E8F0B6E718A3DFAD828B84C15B0EFDB2
-:1043F000EF7C788B842FCD7EB858BC69F0B0671AFB
-:10440000F17738AAA37208DE53B1DF03226DF17889
-:10441000AFF251735FC4636F2E6743E91BEC7DA756
-:104420002EBE74356C1C3F601F857972B86E36B332
-:1044300087F4F225D48FAE231D68D724A7B97F9DBA
-:10444000AECB8B9BCAF357BAEF7583FDE6679CA78B
-:104450001F7194E0FD8F96570BBF2085F960BCBE9D
-:104460003FA3E0E80C7ADE2FD688F89EF2B526E767
-:104470009122E0E375660274F9C5EB6695D9A13126
-:10448000288767BF71DC0CA191D9905F40FBCDBE3E
-:1044900093C9DBE330196DFB03D5632A7CBF84B479
-:1044A0000C85FCFDC9AEF672C8DF9E927F7815DCE4
-:1044B000D35D53AA1C3902F05D2B1280EF876B4A43
-:1044C000D15FB9E94601E9FADD15F89B5864CAE401
-:1044D000AC2347E8BA37AC49C67BB619EA8172A06B
-:1044E000B7B913ED36B8A71B972306F37B09BC0FAA
-:1044F000D5B10AE4F78CFA1BA7C07E6BA85E80B822
-:104500006B4DDBE1F254A86F14F0F7D4EA3C6E195E
-:104510005E85EA78F88C0CF18F6ADA0FD053B79188
-:10452000F5ABDB22E07B3ED5543EC0F9AAB70804C8
-:104530005E28E9A0F69F95CDEB850F34756CA4E35A
-:10454000697D018C8779B7C4E3EFDED5BDCEDE137C
-:10455000AA2E5C7910E453351D471F938E2D37E248
-:104560007C0B370A0452836B0AB3EE2984F95E3759
-:10457000E3F7418EB6FF4C867DCFA4EBA5D1F9E7DA
-:104580008A9DE5986F7DBBA0E07B4D65B7211F74C8
-:10459000713E2049B7B2FB6681D7B95DA8E9C7C7AC
-:1045A00032B391BEAB6F59D904E7EAF42467814B6B
-:1045B00054B7EB8C0C76DE472BE00334146F3C0FC2
-:1045C0006EBFE7B8DCA99353BECCBE488FF3761517
-:1045D000239FCF2755782FEE5EC9F4F2B155515E77
-:1045E00001EC11B3827A73FFAA1F3D04E73FFD94EB
-:1045F00019EF4B4F6774627CF6C446337E3FA4616B
-:10460000A38872E4C4761617121F99529106F0A37C
-:104610007200E86EFFC65219E4E109AF80E34B1F58
-:10462000B93985C57D8DF2A3DAB908E5C523514CAA
-:104630003E2C7838FCFD6A4479B1BC82C9F7107908
-:10464000B034BD09E37EA172A28ED834F99007F58B
-:104650000E5F1AD26FEDEB6602F65DADA4CC7C184E
-:10466000E8664614DC2453BEF01D00F9F685577049
-:104670007AE8F3EB673D3F14E0F731C01BF8624383
-:1046800022DEAF567B67235CB57CC4050F1BE9595E
-:10469000CB7B9AEE1683EFFBD0FF5D5F1343545D37
-:1046A000BFA37752BAA4EBCDDA2578E13B4847EFB8
-:1046B0003C76F0E67CAC2B4087B5B770BDBAC18EB6
-:1046C000747BF4D633AB802E67DE21E0FE89C7DD34
-:1046D000047AA5F661C10971CD0577B0F10BE878D0
-:1046E000A097A33F63F443E9D809745EBBF1BE838E
-:1046F000D87F8BE084F98F6E9A8D7AB8C623127CAE
-:10470000BEE518DACB541F60DED07E8F9802745E4F
-:10471000DB685100AF1ABD68F4778C7F879A585DCB
-:1047200083AEA1E36ECC7486A53B715A16D257DDD9
-:104730007633D24B9D87D1D3B1A744A4C3FDABAE92
-:10474000AD00FA39BD5588407F94BEF283F4253E12
-:1047500062C6F10B9E64F185FD1B195D9F6865F6CD
-:1047600069E923FDD1AF59F08699B0F803B1E9EDBD
-:104770008F0BD16128DDF5D04B9C0E23D19DDBDC66
-:104780003215F20F663F4DF7EF0CC2ABB4E9568C11
-:104790000394364DC7F36AFC532DB1BC8D79CD2BF4
-:1047A000593EA3C4F27BBEF3BE42F6715F503FE6B2
-:1047B000817E84FC131FDDC7CBDB1F433BE0F35F2F
-:1047C0001DC3FCC6C52F50FCD3FEA7B7DB890FED78
-:1047D0006C2FCA9945AD22E69712C957708DEE7DB0
-:1047E0000D2D2F63F16FEC08F7453B2DDE4A3A7E25
-:1047F000D1B3C707E13DF95DCC4EF5FC8A7D6F86EC
-:10480000783A075D03F99912CB0F09D5BFD17D58CE
-:104810001CE7D4F331F85D26615B3BDE332D6AB9CA
-:10482000D66CD1C52D853E66AD1FDEDF7828FEE152
-:104830007E11F6A7FF5D092D2FE4D4938C7F16ED32
-:1048400032A37DB468DB268CF7D56D3B83F9B3A525
-:10485000BF792A16E050B74B34E64F6D137D16CC66
-:10486000F3128F59D8F7390C794CB5ADECFD8EDACF
-:10487000169E2714923FB3F8377B9EF550D02C7EBE
-:10488000E68958E0A74F3BB6C6023CE97C987F34E6
-:10489000B130427ED285F2925AD6F2BCA4F1F87BB6
-:1048A0001DA179499FC23FA81E77F531E679926D27
-:1048B0004C6E51EC17847B1F49B35F163FF5D5A3AF
-:1048C00090477B6AE7678FC2FE97FCE38B4721AF77
-:1048D00083EC8D52C09EA8FBD53B987FA88D1BDB37
-:1048E00087FB474F3E81F99BA7DFB3A05D787ACF66
-:1048F000894CB0174EEFF82605F23297EF29C7F82A
-:10490000C4F2DF96E27BA291FC4DA04FEF45E48F0D
-:1049100086E2637FABE8B3D17D7EFEAE05F9BF3B97
-:10492000CFAC6529CBDF73F2FCB2EDE1F374B57C5B
-:10493000A8DAD66B268E0479D7CAF47A777ED48526
-:10494000F2CADEA678BDFC22F0B79DE70FB68C0F49
-:104950009B57F639FC83E2A9A68F31AFECABD6F9B1
-:10496000BFFC393C6B0DFFBEB6C6D717829B9607BE
-:104970003CB48F7A531FE08F9DBFC63C3EC05BA501
-:1049800013F4FF579910DF3C69F663DCD0BFC7A270
-:1049900040BED7A23D47915F4EFFF630E6D9129E4A
-:1049A0008F7B9A74FFB1BC491EBBA8DB6267F968B4
-:1049B0001CFE90AFE68CC5769E97C6E858CB578B09
-:1049C00094A7F6649F6C665FF3FCE4A5CE0E59B124
-:1049D00005F105F8110A015FC70CF97FDAB943E761
-:1049E00053000E57E8F32F23E503723BBD07BE9833
-:1049F0005C3EBD89E76376E75912929E07F9414C08
-:104A00001FD67985A3E1F0ABE55F6E09C1AF76BE35
-:104A1000487CA1F1E785F7FDCFC1E5A13EEC7D0023
-:104A20000D3EA7BE0D2FA75FE4FC4EFD96BD7D7425
-:104A3000EFBDCCE27E8B9677A6EDB7A985E9E5536D
-:104A4000DB98DD18CADFB5117E57EB0DBE4EEDAE1B
-:104A5000F64120874EED7B9ED39D97BF87734CF622
-:104A600070B9EDD5CBED08BF6376B40FF317A9BFCE
-:104A70001B76BEBAED67C2CEF7A9A45E0BFBFFB4EE
-:104A800083D9219FB688617F0FA1BD8FF17DD52687
-:104A9000BB8C7E97181B8DF268B9BDF05DF8BEDB4C
-:104AA00072BB8CF90E0D2B797EC49D2EFC3D8F06BA
-:104AB000FB58FC1D8855001F9D1F6A56DCF8FB1330
-:104AC0006647553EF857A1EF77CA4926E2D5E35F1E
-:104AD000F2A4E3F7BBB2BF9640EF74AC30BE37D25E
-:104AE00021290712E97C1D65820BECDD9E74669C12
-:104AF000FF6A5534C4CF20560DE73AEB62DF45B369
-:104B00009B7C0AED42EC511D0E74F49CEC77ABE1FA
-:104B1000E7BAE03E7CDD0A6B3F788FEBFF022FB6F1
-:104B2000D5840080000000001F8B080000000000FA
-:104B3000000BB57D097C54D5B9F8B973EF4C26CB81
-:104B400024936560202C37FB1E261012D058261B9C
-:104B50000609382255D480376C610B89686D6CFD6D
-:104B600097613145E5B5A12E50A5CF01C1C7A3F886
-:104B70001A166BAC510708142DDAD0E293FA571BC2
-:104B8000942A28981194F25A2CFFF37DE79CCCDCF0
-:104B90009B0984BEFEA3FEAEE7DEB37EFBF79DEF6E
-:104BA0009C89252E89C884D85C8AB7279BE0DF15AD
-:104BB000FA5F1CA1652B2FA7E0E3787A092131EC7D
-:104BC00015FD6EDF6F920889CA26D94A3121761207
-:104BD000E59269F98958F761299690F536AD96D036
-:104BE000E715F89BD4FF495CCA2918CF4AFFB99250
-:104BF0004AFB9B40CBD6E0F8F16E7D3991849471ED
-:104C00003E6E4286C07BFAA7123259A633A3F388C0
-:104C1000AF36F92224FC5E9B312438DF780771F926
-:104C2000E1FBB4189797D68F8961F313F3A5F3F9D5
-:104C300018E6A3D27F703EF93D5E13C1797D1C3A20
-:104C40000FFA27796C38BF8F0DF3FB38747E05AAF5
-:104C50002DE9D3685A50887285C237C6DA4D389C20
-:104C6000CF87C299102F514A009E02AEF43BED2728
-:104C7000457A52B922015CED1249C3F10CED46D8D8
-:104C8000B17F28D37EC7C09A271252E694DCA7C60C
-:104C9000D1FFEF4C22641821A92D95E4135A96DA1E
-:104CA00008C2277D3DF145D0F9A5074C58266BA3D6
-:104CB0007C19B46D84957823C7D27A0AF19AC742D9
-:104CC000AF3E42C62370579B6857CA3A421EA3EDB7
-:104CD0003A0315A60514A8EDF089F63F51754F511A
-:104CE00069BDD6DB34A7A9089693D7D65546081DCB
-:104CF0002E477211625A95DB7D6424214950FF06CC
-:104D0000F89EDBED8EC1EFAC4C889FD075B545F5B4
-:104D100095DD56272DA7B2F29DBEDCB675B4BF0F48
-:104D2000D23D77AA0EFACE6ACF05F8137F02AE778E
-:104D300040FAA270258EE03CB3B7F92BA3E8246EAD
-:104D400009508052FC67D03EBAF3013FDD16209235
-:104D5000ED31A2ECB710FAF4EC3B66E9A1CFC6F650
-:104D600063F8DD0465FA1C9DE8AF4CA6EB7C50BDF2
-:104D7000D1E3CCA1FDEDAB779AEC84AC546FEC564B
-:104D80001CA17098A48383B2FA26031C6EBA2E3835
-:104D9000ACF4DD847018ECBACFA99E1F015EA69614
-:104DA0009B8844072D3D11E393181F477A0A82FD23
-:104DB0006C319145ED31E1FA59C5F0CFEB093A1A62
-:104DC000884ED2883D17E8D4482F747D35ED148E77
-:104DD00053B57A4F5562904E895D1B37A300E63973
-:104DE000F74998A718776AF90A3995CEE7498A23CF
-:104DF000E8D7D1E28DCCA474EA709B5CC0E7E7549D
-:104E0000EDE7503F7656C06FA6554A8976BF941697
-:104E1000EC5FD07DEB6B32D2776BBDC9B71AE54141
-:104E20008F04EB0EE2BDC780F700C37BC749C4FB0C
-:104E3000F2CE930CEF1DAB2AA28AA12CD923545891
-:104E40004FA008F0F92BDF9D1E85E2737474A01546
-:104E5000E8C14CBEEBA9CD41B8BF0874DA0FEE7CB7
-:104E60005E02FE03E1ADED48EAE3F9B4AAF7A8C992
-:104E700095A106E125EA1D572D586F63AAF61B1868
-:104E8000A76942CF61BA52B2E7C81F62353ADFD88C
-:104E9000A333F643FBD89914136A70DCB6A3AB2B8B
-:104EA00080FEDB80FE51CE04BCF698ABC183F14599
-:104EB0001F3CF69D44F898A04CDFEFB430BA29EBC4
-:104EC00090DC3EE08B6872AF873EDF564D38BF9373
-:104ED000AACC9F12C3E3D103B24ADB97AD35617D03
-:104EE000073CF343D7BF16EB9D54152E77183C04AF
-:104EF0005E051D51C289BE8DCE797896F63EAC3FD7
-:104F0000483709D1A9F47B69D7DCFB496AB0DD4F8A
-:104F10005612CF7C73B01EA59F9775F456608E0411
-:104F2000B8F5D10FA54B902F46FCD076A7193F2599
-:104F300044ABB4FEEEAE15B2963F78BC9644906694
-:104F4000987F493469DE43DB97C4D127941379797C
-:104F5000282F27F3E768FE3E8F95D33E7099245A99
-:104F6000DE0270073CA498189C147B2EF0912985D2
-:104F7000C1B9CC198DF25FF0AB42C11997006A88B4
-:104F800078E1991A4835011E05FF2A0193DF46F59D
-:104F90005FAAA29A5CF4FD5B2B354F55C6C0F2E5C3
-:104FA000961CD9E30B232FE25218DEA980F69ECA85
-:104FB00006ED2C91382081615A5C0A9D57A3B5E714
-:104FC0002733E8D7E539172C809FD5D1CB6FD4F2A2
-:104FD000071EC7388FB72EFF361AE8ABF352444D81
-:104FE00038795503EBA7E31F59390BDB3D1A155BE5
-:104FF000C8952ADA2DDF41D1449FE94B6A4921E067
-:10500000C3AB2480FE8B965CDB09E285E9C3A12952
-:10501000BEED29801F5F2D96F3D2C87609F0A4ADAE
-:10502000B141594EC1FA1472C23E92AE4460DFAA39
-:1050300042ED0D44792AE0B3F9A00D847D04ADAFB3
-:10504000C27BBD3D45E7B7958C017CB7552540BD7A
-:1050500038DEEF2566E708BBA83AFD963312CC7719
-:10506000B45701B94AD252703EE5C4ACB38F4AB2CC
-:1050700028C8617E59B93EF85E69357CE77454DD15
-:10508000CF8E6A73CDA0F43E359BD23F7F7F81FEE9
-:10509000373A82DC7B5B7E50BE4F51EFF254E9EC35
-:1050A0008F3617F0E1EFBE9591EF8DF8D8CAE9F190
-:1050B000C84A8FA78AF2DFAF22293EE87A2B5469CB
-:1050C000AD4DBD36FC8C7833C2EF3B9D0BD17E33AA
-:1050D000C2ABFC03575582DA1F3E467808F8D3F579
-:1050E000AD07B85567CBA8AF04BCFBC389D1C3EFEC
-:1050F00072683D89D10FC38744905E04FDC4A52129
-:10510000FC4B80F6E07B740A968DF035C293CA01A1
-:1051100037D6E7F83B0C70CB80AFEEDAEA214138A6
-:1051200050BAEA8A0FA12B01877E72238B9739DE52
-:1051300085BD5CCDFBA1F632DAC3950E9B0BC05F3B
-:10514000D9C8E65B9911B3D59B82F8DA8AFCE3A74C
-:105150001829C17FD9DF2566E752BB94D167E7E400
-:1051600033603F8F8ED0D6027F04A478B29520FCA6
-:105170003F36C05F57AE36D8CB4678FC0AFE676232
-:105180007FB809BAFB790AB5AFF36871381901F62F
-:105190006FE12BC57120C7496702CA63233D969E04
-:1051A000F0F4F5C3E917E953225ADF7B3BB5233A04
-:1051B000B21F7902CC9A1BAD6D32D0E18DC4BDE631
-:1051C0009415D62FE33CC5BCFEEEF4EC4CA1F26680
-:1051D000624FCD9A53A17CC1C717F0BE89C3FB268D
-:1051E000E2DD2FC7C253F9BACF8E0FE96F6F0AF70E
-:1051F00017924932ACC79EA232F9CEFB13EB1B9D2E
-:1052000046FC12C2D9EADB2AC1FC89D792101CCF16
-:10521000CCD1949131E3B51494C7CD04ED656A5EA9
-:105220000212CBF8F7326B8C1FE64302CAD93E3C20
-:1052300020DFD5D901AE142EE44A74707EBF4B91A5
-:10524000944FB383F33BB7C3EA95819F8769BF87C8
-:1052500071CE4A470B916F157F26E841E3F70B1D8E
-:105260005DCBE13BADB710EBF1752D05A791D25D9C
-:10527000E0B508DFD694ABD8A156AAC242E44159A2
-:10528000149327D5242083DDD919C9F8F9F5AF1671
-:10529000213FB8897D6D1EEDEFD0F9C947809F2B66
-:1052A000A978817A932EE9FDB66BD1691509CC8175
-:1052B00076D576B3C10FF4A2BE59CBE59AB0D34CE4
-:1052C000A9DAB9147C3FCA077AA6F3ABC92AE06D04
-:1052D0006BF6F85B6EA7555273C6CD00F7CC64ED44
-:1052E0003683FE9BCDE96B02D097845690A0AF8B9E
-:1052F000D04FDA3A037DD913747EDD2DC48FEB2FA6
-:10530000CB36FF4D373F6E9718EDF5A09DDE16D6D4
-:10531000BF235D0AC9A6709EC3E1BC36DEE205B9B3
-:10532000A6DC27F9480ACC978C5A45E739BBD9AC9B
-:10533000F347E7C42B88C739AB227D84F9DFCE7AE7
-:105340005AD6E8FBC7A098ED7686DA55A425A43D89
-:10535000D0438C8AF43BC7CEDE7D44FB189600FD1B
-:105360009E72A013EF359F0FA553E3F803F66B6809
-:10537000B75622B3C07E5A6B763B5D21F6C7A85460
-:1053800066BF9CB7576D32A50E6C9768D664B7920E
-:10539000182CF7C45B67F9C2D831A23F4127651AC0
-:1053A000F3CB07EA373D50857699E949BF0CF6768D
-:1053B0007A80A07D5C16709BE6E9EC74E69FF6B3FC
-:1053C000D3DBF7A39DBE6CDF7E66A7B7AF427B7FC2
-:1053D00019B5F741BE53BB1164259B503EDAEF7DF2
-:1053E0007E26E52D52D62EF5F9A10A45455A1BAB6E
-:1053F0007FF7D6ECF847D3C14FD49C66EAF7DC9D23
-:105400005AB0C14AFD9ED6141249A8DF332BB5E02D
-:10541000B6F513283525B825128FE50D311307EFA2
-:10542000D7DE9D9ABF01FCDA81FCCBEA54F5AAFED7
-:10543000E507E99EBB5343E202543E86B54732324C
-:105440002AE6403D2137CAA2187F3E6AF2A7FD1422
-:10545000FCADB76402FAF4969679E8074C6B59EC08
-:10546000A9A2F3E93D70399398405E32BC37A63269
-:10547000BBA6299AD9974DD1B41F2A6FDE746A8DC5
-:10548000D07F77F6F3EBC7527EA9EB905DE02F4615
-:10549000665D1E05FC3F6DFCF34F8EA5E37C185046
-:1054A00030FED069A37448DF7F4824B467CB8E45B3
-:1054B00078F651BC7CDF59DE961AE29F7CDF598575
-:1054C00065524B1D2BCA1F2BAC8C2F3F24FBD37E68
-:1054D0004AC7F1364B68079C6F4E89033AE834D3CC
-:1054E000F587D0E3EA5405E96F35A7C7BA4B320612
-:1054F000CD3ACDFEE4665ABF4EF19BC10FACBB6402
-:10550000C1F7300F984F67A4BE9FC7793F8FF7F55B
-:1055100043E1300EEA19FB51D87B89ADCF8887D3A0
-:1055200029953F85F57CDFE96E43BC51F905FAA268
-:10553000ACB8EB04D811D7D64B6E09F452D365C979
-:105540003F9AC2F3EC3E33FAF767C13FA4E39DDB19
-:105550007770C85CFA6CDCFDC758F007B7707C9DAB
-:1055600053BA63617ECB5EA2FE0BDA43FE21F76085
-:10557000FB79258FB161ACA1FA7AECB707933D2C8A
-:1055800078A8427C4ED8A53759BD3E985FE72A19C6
-:10559000E508D5E7226E2A81FC9EB44F7647C6F611
-:1055A000B7575F4E350B796B023DF6809D8D33907A
-:1055B0003C28BB94487C21F2A24CF1CB30FFB24B8B
-:1055C00043F0FDB923A94FD402DD12B30BCD4485BE
-:1055D00074A1BD2C11F1D7954ED7F33A2FBCB1EF82
-:1055E000C2ED37223352BD48EB7CC7AF25A1FD0C7D
-:1055F00021D292A05D38E9923EEE6AB4A3859EADB9
-:10560000E82C5A9B4C00EEEAED37021D1E51907FAC
-:105610008C76767560F200F6F406A4A33DFBD2A268
-:10562000212EB091F379D3BE0B93413E2D27FE3B43
-:105630006E4C82B8836CF793ABC5BBD6FE6E121D61
-:10564000FF8D80A2823C7823D0652DC4B209E31C73
-:10565000656F97E501FF7606941AF05BCBBEEA8A88
-:105660009E971FB46B3A2F9BF0FD1B970FE07BD1E9
-:105670006F6720210FF4F36E13F3B7BB0EFF2D1AE3
-:10568000E4EB1B97CF27A2DF2FEC92FE7635FA01D1
-:105690009536B92F0E1D6ABF13B9ECB815FC8D38BD
-:1056A0003391110FCC1FED67977C40D6DA487FFB12
-:1056B00044C01FC812F8A69F5D1D84B7CEBEBE921F
-:1056C000CAEDE59164EC15B0732F272E057DDDDB67
-:1056D000196D5F8DF1296657F4767DFEB3A9F0FE52
-:1056E000A88CF1B6DECB32F2D581D7978EEE890940
-:1056F000857B2BE2EFE2B0AFBE7C95D6BF78280A5F
-:10570000E3EA4471E5858B9F04E3C9FEE126273C6B
-:10571000BDC34D1390ED305EF09D60BCC09186F12D
-:1057200082C0645057999B4F5A20DEB231D5333432
-:105730000DDBB747C3BA174531F9E42515C9D4784D
-:10574000222F1D315500BD14AF5211EF3BCDD4C4F3
-:1057500002FED8CEFCFB9D54DE825FB4B8BDCD9274
-:105760001282E7C51441B0BED366EFA88490F73B20
-:10577000D2583CE1F4A125CF019CBC7F8A2019615D
-:10578000ECD387D2983CDC6BF14EDD05F53E36114B
-:1057900018AFEBF06F0E0FA7785E7C422D023D3004
-:1057A0002B4DC57A1D4777B60EA7F53A3E00ED4959
-:1057B0004DF26DF5B2898EFB2A5159DCEFB809E73D
-:1057C000DB172725EE4458EF1D694C8EBD7A84D136
-:1057D000AB18FFD528A6EF26A731F95296C6E26E80
-:1057E0007B8E5424CE45BED22601DC9A4EF5B4C63B
-:1057F000AAC138A1B00F271EDF33B580FEEFC4B3B6
-:10580000263BA04F3DBE5586F5AAA7098997FAC742
-:10581000B1687F53D21CC1FE5E3DCBFAA3F33800C2
-:105820007C175845EC5B91EA3C8FE7D3F2ABDD4A3D
-:10583000C2632AE203F581C083588F9887DA4EDC71
-:105840005B629045DC7BAE168FA67E27F0DB382EA0
-:105850003FDF4D75DF95C6ECAC514077A70F45A1F2
-:105860003DB697C7B589B37E34C04FE0E97BFC698C
-:105870009CCF40E337733A10CF9D66D58BF4F0127E
-:10588000D3BB3B6D7E6B1AC8BF57D2B0AC7ABDD1CB
-:1058900085F47B5347864B56919E9B19DD323ABF68
-:1058A00089D3B9DA1EB0A484E06160F9C6E0DE47AE
-:1058B0003F4A3BD255C70982FCB664C77D2C0E49CE
-:1058C000FCC98C9FBCC9C05FC0178CCFFCC324F639
-:1058D0008C053E99D8B9654D326DD700749F1F84F1
-:1058E000830A7C017C26D6696376F2CF78597C6F77
-:1058F0004B6371C76A393FAEE72AF1BB37563A8925
-:105900001212BFFB199FFF62B201EDD3C597DBD026
-:105910006E559BD973F103EC99B9B9DE02FA60F1C7
-:1059200026C91DCEAEB673FC9DE37C404C51C389A5
-:1059300033F8DDC1F9E0CCBE270EC23A29BD3E07DF
-:10594000F0BFA163C3D3002641FF67B699B1BD90F4
-:1059500023A2FD36DEFF4BC719FF4CDC66AEB89BB9
-:10596000C27BA297D8219EFEEAB6ED32C8F75781D6
-:105970003F5298DC00BD7CFAD063D13F003A3869D1
-:105980002210B7DF6B218B7687E0B76BCBCB3A79F0
-:10599000B064C7AAA9D04F694F82047A40C8018178
-:1059A000EFBD16D7149427D30DF2A48AB53F06F0A5
-:1059B000A4EB7A82CB93276AA83CA1AFE2B7C54B90
-:1059C000D0CF5E1E2736C2AF8BE353D0E38D41B9F3
-:1059D000DBC5E46E4F2C74BD7CDA798CD3F68DC3B5
-:1059E000E9EE892A41772912C091DAF9A67458376D
-:1059F000850FD03FB5F3EF9D918F5C7A44C1FD21B7
-:105A0000BEDF44560BFB47C7BF42CEBD9BAA1D87D6
-:105A1000F14BAA9AD780FF9158EB45BA3E2369A370
-:105A200013A8BE3A037C1D462EBCCAE5C845B33652
-:105A3000DA1EE67B908FC870E083454433C13AC8D4
-:105A400066C90E7015DFD5CD8CDE3EE7F011EF3F55
-:105A500037C06B12C02B0DE1F539D753162B9D6F54
-:105A6000A68FE9292255203D12D32DC381DFCE9880
-:105A700009D2CF192A17016E8BA3F4FE8958D737A4
-:105A80009CAF2EC6B375ECE5E3FE097C9EF1580F82
-:105A9000ED0A6FB909F76B813E90DEA627A0DD45C0
-:105AA0001D2605F9BC6F3FC22F4B4C1EC8300F3B63
-:105AB000F8751827DA82FD2EDDB505E926BEC65E2B
-:105AC00004FB474F28AEC8F890786FD7F68DE84FA3
-:105AD000023D015F0E448F8B801E49183AF4513A03
-:105AE000A4ED126A9A118F14BFF674DA6F7C9526B2
-:105AF00003DD18F12BF619053CF61AF62567A633D7
-:105B0000F8A4A433FE54B9FC1A584FE8E52DC59704
-:105B10009AEED0D337E04DF05B4C3A934F03D1F976
-:105B200043E976ECB7F5C3794E9017623F4AEC2F04
-:105B30008BF1C7A6337A1C683FE99CAA15A51BF612
-:105B40003BD5FC209F5473FB71C5F608DCA7DF0D25
-:105B50005F00EE5D51B82FD1270715E2067C96A7AE
-:105B6000A7E07802BF6A8B85A4D3712FA6D477C52E
-:105B7000D04F37777B6B0BE83A765BBC33A7A1DD60
-:105B8000ED9A02FD4FA935D9218E1DEFB64B1007B6
-:105B9000411207BE38CAC621AA4B37EFA91CEE0234
-:105BA0004F020E03E9AB81F0F310878F837F37F24A
-:105BB0007506FF6E4E67F47F6DBEF6CA40F7B144BE
-:105BC0005B2DC3FCCB981CEAE3EB3282FB8D0BD23E
-:105BD000F57C2DCA61F87A417A285F4FE8D1F33518
-:105BE000B570B93E45FE726C33BB993FC9F8EC62A3
-:105BF000249BEF8A74A6871CA03F28FE1C5EB6EF8C
-:105C00003A95D319A5A03900EFB66D11B89F20F8C9
-:105C10003E7626A930C3FE2DE81BA835533B7113F1
-:105C2000ECDB3A2D2AEC239F3107104F67A8A3DA4B
-:105C300086F8F4603ECA994337307930AD4FFFB8EB
-:105C40004D507E7F04EE2754CB9D48D72BAA09EAFE
-:105C50008FAEEDA548078B6A5325A0B3253BE225FF
-:105C6000F89E506537C92172B1B445467AA274BB1B
-:105C70002E3D047EA5DE6619E0323A51739AE3A9FF
-:105C80009EDD367546685CE8495A5EEF0CC685684D
-:105C9000F96731C3061F17DA987ECBCFD68DA04A9D
-:105CA00024CDFD148C7B4EF56C04BC94243763BC6E
-:105CB00073B079104D3CAEF4C1236F6DAFA7EBAE5E
-:105CC0007B34F0087CBD17E2AED9903FC0E2AE4D08
-:105CD0009DC7301EDBC9F9F9EF4ECF0B30EEECE675
-:105CE00029FAF86B6070E32671BE251F10847F923D
-:105CF000A75986B884900BFBD21384FF28C1FE9B62
-:105D0000E007902B607F8A3C088887D9128272193D
-:105D1000CA71217A757D2DB583C2F0D9C1F498B0CE
-:105D2000729074FEFDD73FA0FE7E137C6272F1601C
-:105D30007A88DE7FA2F6E3211A8B7B60BCE97EEED7
-:105D4000433EB7DAF5FB2C9043EFC828FF8B222C9B
-:105D50005E09F687DC44B50FE1FD019B744A7E1BAA
-:105D6000F53F9BFE261137C4CFFE26E3F3B91F791A
-:105D70006A52C09FEF30B9A82500F91448C7AED1C8
-:105D8000C467A5F4D7CEF76BCB0FC6B8CDF47DAF03
-:105D90006445F9D7BB3FCA0B7CDD6B33615CB9EB63
-:105DA000B50884EB85F428EE5FFB747EB8D8FF88D5
-:105DB0008CE8F943196DBF3592F5BB3592C5E9B64C
-:105DC0003E9A1907F6E740FBE3652D6918E713F1E2
-:105DD000C7D4806A6249646C1C2540707D62BF7CB8
-:105DE00013E46B140F9CAFF1D7F4BE7C8D00D0533D
-:105DF000D3AC9EC33047A31F36E4E8C7FBA19F2165
-:105E00002D2C4CB0E9E80A09D6B9A92EBC1F26E80A
-:105E100068138F7B85E4457CABD32FF509D1A9218D
-:105E2000F253B47B9AE7459476CDDD0B761EE5EF11
-:105E300073A1FC3DB5E091C870FBF39E961F625CB8
-:105E40007420FAF79888162EEE373A83CB5B25300C
-:105E50001CEDC1372E46A961F2253CAF991C0017F5
-:105E6000119FE93FFE8F70FC61197DFB7FC307B373
-:105E7000FF679C77B7998C0CA757049E8DE38569C3
-:105E80003FDB15D2DE6321DAEE98FEED84DDEB9187
-:105E9000F8FEEE8704F5ABA0130AF77119F47BE165
-:105EA000DBF3C64541C2A1B559067970A1A32B19F0
-:105EB000E25603F987623EF42F235CBC858EE70926
-:105EC000878769194CBF7ACCCC0E95CA0FDD03F3D6
-:105ED000F27C65912242E86C22AF67DCC7ECFCEAF9
-:105EE000BFC7A19C34FB93C3C1CFB8BF3911829304
-:105EF0004CDFB171395C5ACB49454412C60BC856C8
-:105F000015FC40262FD516827C3E4672E3BAEB2064
-:105F1000E8E2003AEFC63CC80B4765AC57789FEA09
-:105F200003BF89EA85BB017EA544DB6B4A0BC24BEC
-:105F3000D043EB8BD44ED1C5AD18FF08FF75248F2D
-:105F4000FF5055E30EC5DFD059945443E4FE30CDE5
-:105F50004A9490385BF222BBAE3CB2D9A9ABEFF4C5
-:105F6000FA25E02B678BAA7B1F94576CBD23BD6479
-:105F70000BE8FF4DA407D7378ACF678CA4217D5C3F
-:105F800038FA4902C4257FC0F987AEB705D7DBA22E
-:105F90005D08A50FB1DE6BADEB8395743E94EF3FCA
-:105FA00002FF9C3E673F70521A8A70B7833AA07A0C
-:105FB00091B51BF9F031F423473677A31D3FA76550
-:105FC000BF04FA8BCA0D6CB769A5159FCFACB4A3FB
-:105FD0009F2FF03B82D6833C256F05C9867D81814A
-:105FE000F4D3C68C41EBA78D1961F493C91A7813C9
-:105FF000F6C11B3B6515E860CDC30998FFF25CBB99
-:1060000084FB2E073B59FEDF73AD51A847C4B85F30
-:10601000BE1487FB3F5FF27D40D2158FF4DD14CFB5
-:1060200071B2361EF7C97BF93E6447BAF61F1921D3
-:10603000F2E0B9CE6F22417FE4893C5B83DE01410F
-:106040002CD1F6E013011DB7A614AD93615D7768FE
-:10605000E32265E4F7DD8C5E997EFAE5AE0A9316DD
-:10606000829F0B1D5FCF39A0F6DF5F12FB50627F6E
-:10607000EA4DA7F66A4688BC36EE3B19F74BE45862
-:106080002BE669BBE42897ACD7B748876B32983EBC
-:106090005DB33F0AE1B8262306F77BE97C8FC03861
-:1060A0005D360B1946DF5F381183F5C4FCE97C0BC4
-:1060B0008F86996F932930E780A49BEFB1ABCF57C0
-:1060C0009FCF2CE6D7871F1E2F906D0AAEA3974453
-:1060D000B900AFED16D7090DF4EF3B512C7F8AE3E1
-:1060E0006F39E7CD5E8A2F89E2ABB7E34224D0F166
-:1060F000C174ED24CC431E198805FFE560E7851CBB
-:10610000E09781F60D958C8ABF00BE20FF0FF166E7
-:10611000D72EEC228C2FB5ABB4CBC8A8380BF5AF7B
-:10612000033EDF5C0F7C9A949875A1F697C4E5B3A3
-:10613000911EA5CEFDFF03FB01941F311FD53B8AA5
-:10614000F8D650B8B51670BA9C4954169FD1D34BA7
-:1061500047BAC79CE908F2F155E01309F57E99EEBC
-:10616000898627CC23792CCA291B94A95EDB6B492D
-:106170000DDA5BA3D398DC0BC413CC5F31EEF7666A
-:1061800064CC48CAA4704BCD564DF6FCEBE2879127
-:106190009957859F1FE9A291C3A911F619295CC8D7
-:1061A0003EF3595DBE80010E07D33D590C0E413AB6
-:1061B0005BA35E151E790C1E5A21ACC366A6F402C1
-:1061C000409950EFC4BC18D57D37EC7FEE5CC5E03C
-:1061D000D0FB2283C3EE2E13D2F516928BFC996B63
-:1061E0003A3F07FAA7F26702F453DCDD66827CC20D
-:1061F0000C9F6A82B8724E77BBC97475BA2DCB44B6
-:106200007DA14DCA64F6C5FD8087BC5D2C1E73154B
-:10621000BAADCC1C7F5D70AFCD1C3F783944E9CA64
-:10622000134A5783CD4BA2F4419213FAF747480F14
-:10623000C6FDF7BF1281F27EF91E09E5D3F2D73F02
-:106240009B03F05DFE9B0824CAAADF44E2F7F3FB40
-:10625000D8F72FCBC3EF4FDF9599807AB6B1FD3ECB
-:106260004FA87E1776C34FDDE7EDE972709F2F715F
-:106270001A3B6FB22652E49BB2FDBE584E6789238B
-:106280003D6ED05389D52C9E141BB310F7FBFA9F9B
-:106290002B617CEBE0EDEC7615ED07E33913398AE1
-:1062A000E5E539C8FAAF004E8935FAEF8E981ACC79
-:1062B000C77318F6FF04BCBD99DC6EB61027CA5927
-:1062C000C33EBF78FE2593DBEB6BE34DA1F204F4F4
-:1062D00000C07585CD8AEB5EE12089B51057B029E5
-:1062E0002E1CCBD08F78C6BB4D440D3D2F5313458C
-:1062F000D410BBC8E149D09587CE1AAEAB3F4C4B0A
-:10630000D57D4F5E94ABFB3EB279ACAE3CBAE506B0
-:106310005DFD140A80D072DABA5B74F533DA66E890
-:10632000CA599BEED6D5CFF1CDD57DCFDBB144F7A1
-:10633000BDA07D85AE3CA6E307BAFAF200F6B880B0
-:10634000B32CEC715BB1067425DBAC52A8DDF222F4
-:10635000AF571E6B45F83FC2F5F523360BEAEB4706
-:10636000B8BEEE72945C755FE69FF5DFDE16F4C092
-:10637000EDB50A1E2FFBF280C504F4B8FC20A58BF6
-:106380003168AFBD9DC9ECB5E9F5B8FA8005E45EAA
-:10639000F700F920EF65723F43A17E4C187FF09320
-:1063A0004C5517B713FE03956BEF73FDC2FC26D255
-:1063B0002C831C1072A9299AA09DD7146DC73C9FED
-:1063C000DED84B99C04F545E7D0CEDBAB39F683E4A
-:1063D0000072AA3302E5D45BD99FA03F7E4BCB422B
-:1063E0006CFF62A69DE1C5E252ED28A7F4FAF7A87A
-:1063F000B9BB16F07074BC4C56811DE42A1D4AAE20
-:1064000002F777C0DFA676F2B62C82FD5ECB5F3D49
-:10641000BA7211E64D0FD4DFD1A2488C9BD6025D33
-:10642000858C1B9DC5E099C19FD41045BFF3DCAF9F
-:106430006D3E2FF84B63DF8D2536C893F9E3382F77
-:10644000E823D27D3FECDF7BBF8EC1B84E6DD1BB60
-:10645000E35661BEA89BF97D13D89A6F7AF9ED587F
-:10646000F0D76B771F4CF286E0D1E8EF65F0F511BD
-:10647000A52713F34E5F3D3344A5CFDA570E25B160
-:10648000B8923EFFC5E8E7D7B62CD7D167E3A54859
-:106490005D1E4CA3D26D017C345E8AC1F7BD99FAB2
-:1064A00038C080F01A243C8DEF053C8F169D1905ED
-:1064B00071FA2F23C3D3F16DBC9E281BCF2F0C94F0
-:1064C000273F81B7BBE09A3814E24CB5167FFA60DB
-:1064D000E212024E6F5D6EC07311BF1EE05C44514C
-:1064E00016DB37F975F602CC6B9E686DAE04FD3D88
-:1064F00091C73FC3E4355767819D7BE25F93D73CEB
-:106500003D8BE387E70D0FCF52C3E6355FEBDCC968
-:10651000540B954B61F82BB70F7E7F9A398ED2F1D1
-:10652000FDBF30DB615E0DA0F320DEB2C58CF1D77C
-:10653000B72F471088877FB6D9FC3CE4BB2CFAC53F
-:10654000C1114F40FCBB2802F3F11AB69859BCB6F2
-:1065500028D2072187455BBE3704F22EBFA07CBB43
-:106560008CCEABE1170ECC077ABBEBB12180A73301
-:106570009C9F177DFBE33B00FEBB2DF6BC22FA5C23
-:10658000B64BD2E5992FD916A92B8B7C22813F22BD
-:1065900005F3CF552A4F5BB2F4E768C605F7255AD5
-:1065A000B2B85CBD9DCE77F9F80B16C0E3C1C351FC
-:1065B00038EF376264F473FD457FFDDD185AAEFC99
-:1065C00056C1BC7E637E12218874B290E71156BE1C
-:1065D000A2F49D0380B27F6533F2096D17531D92BB
-:1065E0006F5DF973E64F5746B23CE001F3960CF944
-:1065F0004AE29C45BF3CA5E0390B9D9D22E8E6A9F7
-:106600002C3D5F1F3CCCF292161EE576E535E4E6A4
-:106610003BB08E0CC0D75B75B06FF93687C6DB9781
-:106620003F5B3B8C963F9B2041648E7C76393CDF00
-:106630007C26F4129C0FC80EE2679A6B715F19D822
-:10664000F2D609F7E9CE2D0C5EDE5C5D9EDC956529
-:10665000C1F18DF2DD48F7FFBFE47B6DD1A1515E42
-:106660001B3E5F80E7D9DD4C3E1AF9DC28CF730D65
-:10667000723028C7659D1CCFE5722028CF2DF89D6C
-:106680009A69B81E6F89E25B23A1FFF31ED07D7E5D
-:106690008C9A584E9BACB5A7466B57F747FF2FD443
-:1066A000EF4AD13ECAA27C34FA97B955608CE7ED27
-:1066B0006A3301FFF60E608714A41AF282787C48D0
-:1066C0007C3F9B555E00F9AA7B54F614FC594C990B
-:1066D00090EF2F9FCD62FBCB3F01BB67F97F5E44FC
-:1066E000FEDC12A5391558CF708B2B74FF563C2F4A
-:1066F000727E1FF87CAD3EDFF9743A6178CFCED65A
-:10670000EDCF807F8FF90107A2106ECF3ADD9701A0
-:106710000EED4EF7B730AF32A7FB1F59217859CB9A
-:10672000D7A998F4716BF12CCD16F4EF413DBEA0C2
-:1067300022BCFC4DCD6679C1E54FDF350AECCEBFFA
-:10674000ECBF7B14C8C7AEA74AAF6A876EE0FCF9FE
-:106750006F5CEEC7F3B8E34F816F683901E296B41E
-:10676000FD028B27333EA41F73763CDBEF2EFF83A5
-:10677000278DC2E5D47A19E5F7A9181667FC2446D7
-:10678000A9D9C6DB25E9DAB179CA40F7948F951803
-:1067900045775EA21468DA31F03A4BB3991EB51012
-:1067A0009715DA5B0EDC6205FCCA92DBCEF2D219D9
-:1067B0003D4CA423003DFC98CBB1BF3BB5A26C6C13
-:1067C000C7F4ED44AE6F9518837E1D115E9E89E778
-:1067D0004B4E7709F473A7D35D9AED80B817C903C0
-:1067E000BE698F0A9FE77313C7DFDF853D4662D01E
-:1067F0006FC6F164DC577567635CCB5301FDC1BEA6
-:10680000AA59023EB0F3FA6E89C52B3C37C377E232
-:10681000744BD328BC4BFE4CF03CC7DE231512EC66
-:10682000FF2675574920C79238FE8CF3E8E170DBEC
-:10683000C3F325FAF31DF32B6670F8EF513DC85FE3
-:10684000AD299A13FC55C8CB03BC1AF32C7E99CD05
-:10685000F6D5B644F5E0FEA0F76E82F97743CBBCDF
-:1068600012E40F25D7B695538C93F9D9CC9F4FA836
-:10687000D19CE0870F775AF09E8AC1F25B7EBB1BEA
-:10688000E325C51A3BAFBCA9DB1B9949E735A45BDF
-:106890002BB7D0677ACE105CDF50D2BC8AF909AA38
-:1068A0002EBFA958ABC07D7231EF92F9CD6B2C2A67
-:1068B000E6C3ACC80EF16B929779C3E63B19F7B902
-:1068C000D708BEE4F908C53CFFA078DB53984F50C9
-:1068D000BCED66450A91339BB2CDB8FE3387968CEA
-:1068E00086F50F94C7DA96CDF0F0FD6C265F06CAE8
-:1068F0001F5BDF2717FAE58FADCF7684E4D7349E90
-:1069000047F9D798CDE4FCB3905743E1FAEC7C917A
-:1069100057B34582F5EEB5B44FD905F35A6EC23C74
-:10692000A6BEBCA2F92CCFADAF3DE417D1F7CF2E58
-:1069300062F945C37C1B705FE26224CBA3B8B83D0B
-:1069400082C0B9A467B76D1C02E7109FD54C6807D9
-:106950001AE70F0782785EA419F225018F20AF0491
-:10696000FEFAF28F78FE5ED7F69771DE623E9450A3
-:106970002C00F7F41C36AF253B764F01E21FBE2CEE
-:106980004182B89D98D7B5E4FE4B9C2F064B872FCC
-:10699000E430FE08A31F5FCDBE3EFDF806E089EAA5
-:1069A000C703D0EEBAF523D78B424F8AEFDD9C2E7A
-:1069B00066660FA81FBBB3C3E84715F29E31EFC848
-:1069C000E4DA1E065F3378BF37BAB54AE0E7A2348F
-:1069D000ED4FD0CFC409BE8310072DADF11E047E4C
-:1069E0002F96F879EB294C0E24F690FD10838B3FFF
-:1069F000D1E3863CE5AA6C966F71C36937EEB3C7E5
-:106A0000798804EDC53D066D09ECBCB371FC499C69
-:106A10002F4C4F06301F2EA9337C5E6A412AB3D714
-:106A2000A8BC3C0B702D194DE5694A7F791A067F89
-:106A300017A07ECE2EFF01A835363E3D1ACCAAAB5C
-:106A4000E0EFAF0C7FEE4BF014F8CABD22EBE2781A
-:106A5000025F57F8FC6FCD70FF03C639CCF97B207D
-:106A60003CC6E650FC8D07FA66781479C03B0D767B
-:106A70006A450EC3CBE41C7D5C2804DFB139E3FB1F
-:106A8000E35BC8F1BD47F6C880B792AAB635800768
-:106A90008AD7A41CDACF0D65FAFC4F235E853C34FF
-:106AA000E2D78857910748F1313A278CFE12FD183A
-:106AB000F558889CE0FBCE6A5F7E07D8CF224F5CFA
-:106AC000AC43F0CF240E8F1B35ADD2C2E8B410C654
-:106AD0009D38CB77D00C74BAC87BD0124AA78B09EB
-:106AE000DBAFE2F348EEF1E27A869DD0CAE179C3EA
-:106AF000693FDEE331B499AE8704D733B2FB38E6A1
-:106B000063C2BE2CC49BF61E3980F31ED1DDC59E28
-:106B10003C8FC8A86F83F9B7AC9F17B8FC6A3DC714
-:106B2000F2F85ACB99BEBD37C35D99837CECAE8237
-:106B3000F9AFC8705743B92095D14D6C8EFB6628CC
-:106B40008F1C40DFDF9AD3B74F3D1DEA253D40BC87
-:106B5000E21E1488C327412410B6F09BBD9285C263
-:106B600035C94DD0EF1C9DA8AD82BCB7C044E282B0
-:106B70007C80B83A7B39C02B61916B3FC0B3F51C68
-:106B8000BFCFE53E82E7BDFAF2ABB454CCA700FE1E
-:106B90000DE5977A3E8FFA1CC607D4DE9993C3E6BB
-:106BA000A5C1BC84BD23F87220FB2584AF1BA0FDCA
-:106BB00075F0F5F29CEBE3EB15398CAFEF8776D7E8
-:106BC000E2EB1FE4F4F1F543D0EE5A7CFD28E7EB4D
-:106BD00017AEC1D73B78BFFFC5EB87E1EB47C3F1E9
-:106BE000B5CAE94EF0C59E2363A3215F601BEF2F5A
-:106BF000447E6F80F6D792DFFF049F6F867EAF657D
-:106C0000A78A7E05BEAFC527B1B91E8483B0474FA2
-:106C1000A733BC0BBEA7FCF29F007FCA2F3B39BF36
-:106C2000FC92F18B8AF58CFCD5A7EFBA4DFC1E11B6
-:106C30007B7468DCFBCD9C7EFAEEE59C30FA6E241A
-:106C4000E1F0AA61726404F1CAB1D06FAD1DCBF658
-:106C5000B37674F3634F05BC00B7F77298BD513C2F
-:106C6000403CE1779C4F92BA2B50BE50781ECA0927
-:106C7000D16349C43E15FC9CCF73D8BAC64D701F72
-:106C800004B964777B309FDB91CBE022E044DBBF2B
-:106C9000134EEEEE037CE4F7F71B8C7838C8E7FB65
-:106CA00039A71F63FF42FE40FF05D8BF6A82FE4539
-:106CB000FB3F07E5D047B08ED2079A65585712714F
-:106CC0004783FC1172928CA0ED8BFBB7FF34D8FE8A
-:106CD00053584769336D9F1F6C3F92F8315F2761AE
-:106CE00011955304EC7717DAB3EB55CFB91C9C27F9
-:106CF00061F2AADC84F2202BDD8D7C174EFF43FD70
-:106D0000EBD1FFB01ED0FF83911357383D81FE8732
-:106D1000713ECEBA86FECF65EB8ECBBDBA9C88CFD6
-:106D200065FD3A7207D6FFB961E4C41ED58DFC1427
-:106D3000868F12721D10677127423BCA4749501651
-:106D40007A87B61B02EFD7AB0C8EEB6B4DD9685F21
-:106D5000932857387F262D3766B0F945697C9ED732
-:106D600095FFFADC8F7A2C006F91A722C635E6BD1D
-:106D70000A3C2EEF94C6415CAEFCE0658C93F4EEC9
-:106D8000FF1BC649948CB9E360FCAED758BC44E401
-:106D90009588F157703FB25ACE6F8738EDF91D16BE
-:106DA0008C7FCA44DD5846E7D374C44C7C2807D98D
-:106DB000F965B14F6BDED1DA0D71793309B9670727
-:106DC000F59D1A0774693EC2EEBB2149EC7B33B1D5
-:106DD000AE62F730EAF769E3DDFA7DDAC41AFD3E08
-:106DE000AD88232E256C9E0E8F7EDF76E82CFDBEAF
-:106DF000ED304DBF6F9BBC68AC611F57BF6F3BBA96
-:106E0000A5C2B08FABDFB74D5B37C3B08FABDFB779
-:106E1000FD8C343F5D46D79D2BEEFBF1BABBE15CA8
-:106E2000F47C3EDFAC4DFA7DDD2F76D6E07D21F39C
-:106E3000797C3BC7A7DFE75D2A2F433A266DEC9CA0
-:106E40007333FD07E0A690C0E164C83FF0492E3FD0
-:106E5000FDDCB0497F0E7A71C7166CB7D8A77FBF2B
-:106E60007487BEFC402EBF0786C7BDFBD3410CCB49
-:106E700063D8CCE2FDB237CB40077A7CFC6FE942A5
-:106E8000E57411E1D4D345A4AAA78B8637F796C041
-:106E9000BA8DF08DCED6D38B11BE36979E5E045C34
-:106EA000A99EE4F9386E5CEFC20E893C23F587EBAE
-:106EB000A2CE0DAD700EDD0857427CB8EF6C84AFEA
-:106EC000CF00DF73AAF63CF0DF858E07F0BE1FA26D
-:106ED00069E3A0DD55F263FE83D51F747E4C3BD47D
-:106EE0000FFAC9FAFC985EC8E31A430691C775F019
-:106EF0007F20AF2382CED00CF1C6092E6BF8BC2DBB
-:106F0000EDF55CD4336E82F19E3F10D71A5A6B8D2B
-:106F1000AD24EF1A718103B9684769789F466937D4
-:106F2000CB73234AB71DE2BFE1EE6F349C6B3A0A84
-:106F3000EDFFD9FBF184DD48EDF43FE632BDFB2ED9
-:106F40003CFBEC746EB7097B7BA07EFAF25C0678A2
-:106F50004A0764CCB30A4851AE70F70D9DCE95C276
-:106F6000EA0DAA274EE73A42E25BDFBB7018F4074E
-:106F700085F717F0DE66A3FA5B1A94FEEE05386D0E
-:106F80008C8E45BA0EBC29FBB26883F356350ECE03
-:106F90009F1BEF2711794FCD70FF08D52765E7B309
-:106FA000E3AE96675066B89FC6788F47EB589E67EA
-:106FB00092C7D6F96B7E8FA0334FD29D9711F1A85F
-:106FC000A6752CFE0AF70E7686F4E3CC6387566E20
-:106FD00056CB9D790E8877B178616B8A847642AB07
-:106FE00024A1DDB039BDC29947FB3F945B3E14EA52
-:106FF000D9F9B84E88458FC7F33E381FD5705EEC7F
-:1070000018AF7F2CB7029FCE3CE16FD97301FF13FD
-:107010005537F66B91C3EFAB8FCC63F64F35F0B4B9
-:1070200023C84FD7734F8325A9FF3D0DC6FBCFDC87
-:10703000D9F62E5007C67DCF17AF754FC3BEF0F7F8
-:107040003400DCA31382FC5092A7BFE7AC23AA074D
-:10705000F741036FCBAEADA4FFBA6FE6785CCFCF3C
-:10706000853878FEF728BE9FD2BF3E83D39601E2D3
-:10707000BD13D5F26A80F307E99E9B010FE29E9D46
-:107080000E8BB606FC8FC04B04E791ED2307A05C86
-:10709000E055318FBC35C51B8DF7011499D09F5732
-:1070A00037B51D8C4CC273B609921A942766857841
-:1070B0006D94CE16C2655D60DFF5CC3D60A3DF1D2B
-:1070C0009B6F93E0FE9636D256190B76D766123632
-:1070D0003E58CFE9696AF9018CB33B02ECBC5FFF13
-:1070E0007A26E1276AB08ED280364E4A0DCA251420
-:1070F000B9E03F75997CE1E2B559E9950BA15D8155
-:107100008F848DFF55F37B66EA54CF32ACB7CF8FB7
-:107110007E518390EFF34D04EE37BC9DCBF3DB370C
-:10712000B3BC5C72F9CA15B924787E8AF64F403E2A
-:1071300035CCB4E1BDB10D9D2978FF16F14878CF6B
-:107140004B53E7310F941B8A8BED106F76BF4F24A2
-:10715000B8970DCFECA11C54C8A742DFA2FD9084C4
-:10716000FBFD33385D8BFB94A81E591F4DE1DEB04B
-:1071700079D501C8EB7EF779DA07FD7442D64EFC6B
-:1071800090F6FB5DAAC45AC6C2532175188F766269
-:107190003F33793FDEBFD171ADC171BFDBF926AEA0
-:1071A000E7849978AD947ECD156C68F30FE230DFFB
-:1071B00058E4AFDC616DAB063DDB6B0914C2F9A985
-:1071C000DED7DE1B09FBD41FFE9F0B36B08FFFAC52
-:1071D000046CF0FEF4C37FB4C1FDC81F3E2CE3BEB7
-:1071E000DE1CAE7704BC9FE7747E31CFF30CD0E792
-:1071F000BD2BBF2D09CDA3272D0EE49FC53E1953EE
-:107200001E04DF2DDD110D16515FB9B13D5157162A
-:107210007AA411EE6B0D43472738BF2CDEB5C502AB
-:10722000F70B5CCCD376C1F8A715463FA7F7D97CFE
-:10723000707FA298CFDC5D4516B04FFEDC1941FC93
-:10724000A00F956E333B4FE6AE95283D681CEFC608
-:10725000791E7E3D1AFB5BF014934FF574AC160A51
-:1072600057AD7331CA21E33A167CA84E86731C0BC6
-:107270001E9508ECAF40FD8729DEB4961F639EA8DB
-:10728000719DF55EE37D766E948F0D1CBFF3D6E99C
-:10729000BF37743E8EFDCC27EA7AB0A717B419BF6A
-:1072A0004FF90CEC9F06833C7B278FDB5B25A414F6
-:1072B000EE9D39604D8BBBDABDAF6757DA91383F31
-:1072C0005F69C5E7E995049FCFE4A908F7659DC705
-:1072D0001E04FA59DEB1DB02FD1CF48D4F82E3A3DC
-:1072E000533BA72860774DE5FBACB3F9B94E74AAC0
-:1072F000D979CE1EC053558CE13C275F771DC7035B
-:10730000B126229DD5C17A0BE1BDF275E87ACE1F78
-:10731000498BC17D3AB1AE52BA2E79F0EB12EB1126
-:10732000EB13DF1B65763FB0B19DA0F36738DDCD71
-:10733000DF765BEB700A8A35AF7D36AA87F9A968DC
-:10734000DF5772BC555A1F47FBBE92E8EFA5A27FDC
-:10735000C7817F05BD35109702CC6BA42B816712C6
-:1073600063F6F2FBF9D1FEEFA3A7CE7F43B8087C0A
-:10737000537E71F2FD3427ECA751BAD2D9DB948E3B
-:1073800074E5056DFAF297E69E51C0EF0D86FBA1FC
-:10739000BE34E45F88E7A5BC540607D53D19CE0787
-:1073A0002C209E56B6EFCACE1F9D56DA0EFF10F85F
-:1073B000701BE3833F73FCB7E47B46E783FE52DC3C
-:1073C0008520EF2B560F939368BDFAF5921DF86B4D
-:1073D000DEDAA2C9C09763891BFB9B9D18DE7EABDA
-:1073E000C8677A646EB39958A8DD3F978E01726EB4
-:1073F000EE3E19F91EF2A6A60D817B26183E1A1F35
-:10740000DD6D19469F8B9A1B98FDE0637C23EEABE4
-:1074100015F427E4FF92F5FBF1DE0DEAB7E8F8ABCF
-:1074200009F2BD0B818F0DEF9B6F463C3411F6FBCB
-:1074300005027E37E573BBC1455C409FDA83362B7E
-:107440009C17B9D6BA49FFB803C625CE1FC940BBA1
-:10745000F3BCAA0E857A1A1DB31BEC48452B85F7A1
-:10746000145EA8A702ABA2F11ECF939764A2427E3E
-:107470009B5D2B053BAAE7FD9178CE5DD0AB586FA5
-:1074800093753DD26B13D1FBA3F5D4F181FDCFFAF7
-:10749000ED8998D744FB2FEC007B63BB19ED092FD6
-:1074A00059E184F3F69E47CC2827E776C4A33F3CF6
-:1074B000772DDB2798BB2B1ECF07527F14EF1116B9
-:1074C000F838B9B6D2320CF19582F7F3900E3D9DA3
-:1074D0000B3CF5F7270D785AB7FFB053EDEF5F86F9
-:1074E000E0E9D400783A158AA715F95C8E703C91D2
-:1074F00087B9FCB9EF5006DC5F75BE3912CF83182F
-:10750000E950E82932FF06CCBF1271AA9AE10C2F8C
-:107510004471619EE285F5E3116F467CD5FC631EE4
-:10752000E285BC6FC3FB8B67A7B17B5BEE9518BF91
-:10753000CC5E33A506F4F9E3F9CCAEF93D955BEEEC
-:107540002C6A8F53B9E5A672EB8F549E41F9DD95F5
-:107550004E2CBFB752C5E79F5666E3F314DF5715AD
-:107560007C4409C10276E3867C26C736E48BB8E109
-:10757000034E302D6AFEF1C7F1F03B0A0EEF943B4B
-:10758000AA471272AB5BAF0F67CDD4EBBB1EB37DC6
-:10759000B213FCDB47D93D4C733D37EAEA1345B5DE
-:1075A000C07968923D2EF81EF94DB5C07DE977D5BA
-:1075B00026EAEADFB12E5957FECF7C15D77D5B4D09
-:1075C0009AEEFDDD7579BA723DDC9B0874AE4E40D3
-:1075D000BE7980E75552079DE1859F23FCBAB974B7
-:1075E000E8F7E97CBF3E6AC6EF467C08BCCEDF24E4
-:1075F000138DF6376F13955F748AA7DA289E68BBE0
-:107600002F4ED8D00F69DD35EE9D09B47C729719E5
-:10761000E30727D726FE04ECA793BB1CB1843EB535
-:107620005699DB1976BC4F49F45BB976159E87A94C
-:10763000F745B8D09EE8F2FEBB28ABE0B7C2248184
-:107640006F8ECB3EBF84F863F1839D11680F9FA6B8
-:10765000761D5C3D7B5A226BE10907E6E3E8F76F94
-:10766000BA1D3EE0EB9A7FC86E27D0D3CE48767F16
-:107670000838C3F4FBE7C732B63E86F4A5B6FB91E3
-:107680007F23D05F98D7C3D647A4B1C980FFD3F179
-:10769000C41D4F27D1B8E2BD8F148AA7C599DD85D7
-:1076A0007EDAAE2EC5EFB893B63BBBCDCCEE97A33A
-:1076B000FDDA69B9F197115B983C710FBDAD2014EB
-:1076C0009EBE425877D670CF87F9B07FB0D057882A
-:1076D00072ED6107F29511EEA72C1AC2D70B7C2030
-:1076E00005E56490CFD87E10156EC340DECC33BB69
-:1076F0008680BE3AB5DE8C7629D527B1B7611C6687
-:107700000FD2F129459D0CEB3EB52E8580DC12E3AE
-:10771000CE5D2FF37B42285D42FD0DB2466D072200
-:10772000F496779DA491A1FDE9E6FEFB4A312FDC9A
-:1077300068FF8AE7979457B5103B62C96BEC7E7E71
-:1077400052DCA3CC2C085D07FB7D05A24DD0E56B78
-:107750002E4BFDED473126B46BE2209E7EE6B88CC1
-:10776000747626B5ADC44949FFACE940C9F769F95B
-:107770008B69DE4F155ABE6FB416554097B4D4B41A
-:107780007E14F84FBD9D9FFC04EEDDFBFC45331CD1
-:1077900087274B762E1E8D711F6E7FF7975BE2FE5B
-:1077A0003FF730B83F65A9DA8E7A5C854372B87EC0
-:1077B0001FCE53E875FB9312D858E493F1B6C7C0B7
-:1077C0009F9E67389FF28999D909230A989C12FADB
-:1077D000FE1E5E9E6762744D5E97300F9CF07BE5E7
-:1077E000853E10F25AC8FDFC02665F08790D997655
-:1077F00020B716C2ED2D749DCB7644F87C29D8D6DF
-:107800000E705CCCD0441617A8D86E89E5C5A78148
-:10781000971A4837CEFF73B36F61770AB4DFB23679
-:1078200001DB9B5D18A7E5FA05AEB506B9D4C0F932
-:10783000AFB14DF2F9917F989E5CC0FB27A06742E3
-:10784000E4583FFD62D02B0BB85E5D400C71DE3614
-:10785000BDBEF344DB705D4BE8B8A03F83F3A2F6F6
-:107860003385DD42CD77783ACE5B72F9C2CCA38105
-:1078700004FC907FD7B88BC5BD8DF332AE63B0F3F7
-:107880005CE8BAAD2ABE38645CC3BC05BC31501C90
-:10789000820701F7855E06CF859D12E2EB2FDC5E45
-:1078A000A37F189F36E2BF8178A6439E42C39354BC
-:1078B0007EA604E941D0C1E2DD3E0BD8CB5F90B695
-:1078C000D818CA07CB36EDBE63A20AFEF331F443E3
-:1078D000EA12FC19A6784212BD2F3D5D73D3B5E3C1
-:1078E000FCFF2A38C12AE07E5A6C47E1B2609BEC6B
-:1078F0008E2CD4D5E379DA5E84D722AFD70271D04B
-:10790000453CAE78AD793629EC3CEFB5E7CBE0F8F5
-:10791000AF9EF7D3057A3B36681F6584F5B7FAEC5E
-:10792000A26BE8E30FCCFE91A08F032315D4475F31
-:107930002BAEF7CA93403F67A0DF3090BC5DC8F51F
-:10794000F202D0D3F4F9E9A6BD786EEC2F4FEEC564
-:107950007D43CB8B0B62C15EFE74D3BC9F40DEFCCB
-:10796000A7BBE6A15E6E7846E865CD12AAEF2B377D
-:10797000D53FF77F804E7744E20985855D1AB7C70A
-:10798000A9FC03B9B889C93FF224938F0DB1ECDE8D
-:107990006FAABFB2A0DE830BB52CA0F790F7A8D7D3
-:1079A0001E9CA795627B62F7B37B21ED7ED05F4280
-:1079B000BF0ABD7B7498D655007A413EFAEE4374F7
-:1079C000FDE7F6C818D36994B78C82DF4318488E58
-:1079D000FFF3F036F5C13B6510F09E0BF0467B8857
-:1079E000C1FBE3750CCE9FAC67706FDD95160B7E07
-:1079F000F0C7EBD2D00EFA785706C27BFE6314DED6
-:107A00006807AB7A3B681D8537D8FF006F3AEEDC1C
-:107A10002E95C3DBC5E0BD8EEBA1F5EC39BF1F5C35
-:107A2000BD986FFAE0F3112ED0EFA723FD0EF053AF
-:107A30004EEF9609ECE7F7D949DC9E1170FE86B44B
-:107A4000FD3BD855FDEC9B0D11C44EFB5BFC920D2C
-:107A5000CFD57C2E950F05049C6DFB6D2C8C171CCF
-:107A6000BFCFAEB954106AD70C123FCB8907F3DEF3
-:107A70009777FEF604D8F570BD0AF8FDCBC539F846
-:107A80000EFD397849059906210A97D50A7430C246
-:107A9000784F8086BF0F7131E3AB392B909F0399EC
-:107AA000A1FB414D517E33C4A302BB25C477E30340
-:107AB000E5B1E504F6B39A711E8E42A69F25B71B69
-:107AC000E38C11946EA2E878CE4215E72BA97616C6
-:107AD00077DC4CC7B505E76B7C3F1D0411E8F71850
-:107AE00013EA77E3FA27F3711A6513FA21CB2CCC4A
-:107AF0001F11791319FC7B4621F3EBF30AD93E439E
-:107B00006F2441FDD1BB21DAB70AD75785F14F85E4
-:107B100030FA5604DCECCA97BA7BCA797C017EBF86
-:107B2000008CEAF9113CFE4B552DB4BF87B7BFA7B7
-:107B3000ED6DDCCFA39ECC2F40FFCE6E8970813DD2
-:107B4000EB85FBAD28DDFD388AEDBF90A43805F844
-:107B5000EA6E2E67EF697BDC03FA68765BB41B9EE6
-:107B6000741C2FE1F1D662D8BF1D6EC1786B9DB534
-:107B7000E74530AFEF757EF23D2B5DDA2A13B35F38
-:107B8000562510CC3B1943CD7888DFD24FFBAE246D
-:107B90005E8D7EF4F1E46510D765F7B579519EC826
-:107BA000265D7919FF5D81BAC2CC3B9F1C41C81F7D
-:107BB000885A00F85E06B0017AA88FC3F8C0AD10ED
-:107BC0005F4E80A782743643215E137BAE8BC173F8
-:107BD000FE2CDE3C9DAFFBBB13883F8EAED7FFA6CD
-:107BE0003EDE7DA7DFE4CFA278B855F1EF07BA36C5
-:107BF000595533F8079E1A692CF8CDCB560F6EBE37
-:107C00004D854538DF6526139BE74312DECB700FA9
-:107C10006572A0CF390AE992C732FC01FD3525B063
-:107C20007B8003F731FA16717681A722DA7D287CF2
-:107C3000EFE1F3A3FDAC8B85F696F0F1A51F160AD4
-:107C4000BF98D99D4B39BF2E15F4B64BCFA7CF02A5
-:107C5000BF001F819D4BE1760F7F0E44EF9B38BD27
-:107C60006FE2F4DECACB831DAF3182F8437FAF45AC
-:107C70008C7B2B7F3E5D988AFD8979087A263C3E75
-:107C800065A29203E8E854DB1AB49B1619E2C524F6
-:107C9000348E25872BF7C91FD315785A02F3613E1E
-:107CA000D277225D40D7F758DA33D8BD12FA7A621C
-:107CB000FFB70E6EEEC2F33A44F77B0AD5720CE6BC
-:107CC00013D549EC5E99DE729BD744EDC50FF8BD24
-:107CD0000EE79BD9F9D0BA87F8EFA0C43D381DEC68
-:107CE000C3BA588B02CF0FF8FD72F7926E5B4A4A07
-:107CF000D03E692D97F9EF6ECCBDD39D0FF74410A0
-:107D000051DEE81E8151255E6E780FF63B665EA659
-:107D10007480E54577BAA9DCE83DC4BF7B6919F0FA
-:107D2000F888A0E746ECAFF729F1FD3E567E547C7B
-:107D30007F9095FF4DF4CFCB1B0CDF5719BEFF9CF6
-:107D400095DF2C7CF04E2FD8B57C1FA7EE0609E5F9
-:107D50008A95D35BDD6A3FC2B9CE74803D2B881F04
-:107D6000CED75EABDE37851E6BA103EE37386503D9
-:107D7000FDFDADCB8DE5F3F9DAF1425A7FC96D9285
-:107D8000D702F2F2B82F93CBF7B079B9564EBF179E
-:107D9000C6D0FEC607E14DFBF9F09FE96775FF7E8F
-:107DA0003E85795D6F3FD35D6C7D21FDF4FE33FD33
-:107DB000EC75E9E723ECA3A963DD5163403E54DD94
-:107DC000A88BFB2DFD912B0EEC2BF20EFB1D93A52A
-:107DD000ABDB478DA3FD2FFDAF57462D0CF1C797A9
-:107DE0005F92891BEE47B824E1F38BFD7FB2C0F9A7
-:107DF000FCE5FBF65B26E7C3EF2FECB75486CC6BB4
-:107E000099C8B3243DCA8C10FD1E37C6C4E506FBD5
-:107E10001D87A5FF7546017C2E35B57FFA0CC48100
-:107E20006E90C2EED7FE95AFEFA301CE8339C63078
-:107E3000F95756EC4E82755E041944EB57AE09BFF4
-:107E4000CF3F670C8B27D6F17B95E795D8AC2A8579
-:107E5000F3F8E36C7F7AE1E694B110E77514548C83
-:107E60001A03F31D305E1A60F1D24E162FAD4BE8A7
-:107E70007E00EE31BDEB574F6D847B4DA76E147CB9
-:107E800042F0F7726A2204DFEDBAB3AA0CE35F583E
-:107E90002E1BF3C246E09B23FC5EF1D9A5055120C1
-:107EA0001F7A52A24D762A4746E4D7DF05F3985D44
-:107EB0007AD364785F1E61CBAC677177A48B11F9BC
-:107EC0009E62F80EF521DEA15958FC4B7B4BC6F89B
-:107ED000975618AD85DB7F1ECBE170D718764FF132
-:107EE00011139DE7D8E03CC4F8D46079A09BF677E5
-:107EF0006AF5B022B897BF25BF7C16D2131FBF25E5
-:107F00005FAB86B2189F2EB710DE0F761E159C2E23
-:107F1000668D6178F394517A0BF11B675445EBCA77
-:107F2000336B13893B340E3B3359579E5597A6ABA1
-:107F30007FF7FC3CDDF76911DDC5CDD7610737D987
-:107F40006C51608F7DD8F9CD7FDF03F6DD36D92502
-:107F5000D1F52C7E6DFB7FC3EFA39C871F5C60E790
-:107F6000AF301EF6F911F67B7FD4AE5342F775CED3
-:107F7000916ECC2B0CD92F08BB9F2AF60B96DABB3F
-:107F800030FFEF7FBBAFD33286EF178C2563411FE5
-:107F90009E6F7E17E370CB63D8BACEBDC2EF2107C8
-:107FA0003D42E9FC666808F7855D5A85BFEF53C915
-:107FB0007FBF75D81895F90523EE53E0DC77137D64
-:107FC00082FC9F4CE5541CA593EEFDA4601FE45D6C
-:107FD000A4D8309FBCF1D2ED18E73E12E5CDBF8F9B
-:107FE000D65BBA6E0A96975F8AC67E7F2F774FC69A
-:107FF000BCE697D9EF214E4B9EBD1AE60FF5EFA7D1
-:10800000E34DFBD5CD3500A7E5FBD8F9A969F21FF3
-:108010008AA19F656D53B0FD34991C91A8BD10775E
-:10802000E91EEC771AE87A5A964B6C8F81FE952DF3
-:10803000FECC6741AE586C28579A2E4562BBA99575
-:108040004C4FFBC6303BC6DCC3E6557DE936FC2E03
-:10805000F0FFC29854DD3D3266C73605CE27987BC7
-:1080600024AC7FCBA53C7C8A75BE95FD3CDE576277
-:10807000767C3D19F23ADF4A92EC687E18E4EE8590
-:10808000E6D23812462EF58D7389E501475C627998
-:10809000C12F14B93B81BFA73FDCA3C0FE0E89B13D
-:1080A000DA015ED32714A90B43F8493E709705F017
-:1080B000627EF29805F47E047D56867C6F14F9EB9F
-:1080C00006B97C80CB01717E41E819A276E87E5F1B
-:1080D0004DF0CBAF38BF8AF6DD40EB80C79722D09A
-:1080E0009F7AA3487B17E6DB5DCE7E278328DDA33E
-:1080F000605FE55F357F8A67AB84F67E0FE6C54F2C
-:108100009FA09A60BFE0FDBE7530BEBDD63A7ECB63
-:10811000EBFF5E262DD0EFEF274DEA76D3FEF6FF7C
-:1081200070DC3890FF62DC2FC6B073C3C41EB80C7D
-:10813000FE5DD3EBD12AF0F73470968A83762D7DDD
-:108140008FF7E535BD1EB155A2DF9B62A97F4BC7F6
-:10815000AF7C23D20F74BCFF8D48057FA7A858FBC6
-:1081600002E465E51B5955E0CFB93B231482768EB6
-:10817000FB2CCAD501E67B2D3965A433C197DA3AC9
-:10818000C62FF59C4EE772FED3381F5D681E8A7CB1
-:1081900078E1613A69D80F7D582AD80776816AC399
-:1081A000FB89055F4E033F88BEFF7F46E48E2C00AF
-:1081B000800000001F8B080000000000000BC57D40
-:1081C0000B7854D5B5F03E73CEBC9299C9E44942C0
-:1081D0001E9C400841024C26218410601202A2021B
-:1081E0000E501530C88008110909515BACF6CF84D8
-:1081F0002410452D56DB068B74C04751696F406CC7
-:10820000D31661786863F5D368EF6DF1D6DAF8B804
-:10821000888A3582F5A3B728FF5A6BEF9D993349B9
-:1082200010EDBDFF1FE53B5967EFB31F6BADBD5EA2
-:108230007BED9D79E312432D0A63EBCE253296CC7C
-:10824000D83C95752B498CD59DCB65AC98B1F5E79D
-:1082500092E97DFD393B3D579E1B47EFADE754E664
-:108260000378D53985F900BE6AA633684A60EC42C6
-:108270005120D3930AEDB45C3E87B9180B6CCA2821
-:108280000938189B7F57AF664B618C392CEEC7A11C
-:10829000BFF96545E9ABE1FD05FC99C158CB9125D6
-:1082A0004C7742BB297E8B0FDEAF82E7CCA8F29BD6
-:1082B00018F37502CC987B765A097CDF9A6BBA87E3
-:1082C00045CA758F89B14958DE4CCFF9B2BEDEC5BB
-:1082D000581A6337B819FFD90883CB60CC29EAAFA5
-:1082E0007484479BA03D7383DDB309C67526459F03
-:1082F000CD006EBC1B004041A3D93FD309E36EDC27
-:10830000AE7882F0F98DA54E1B8379969E68B004F5
-:108310000A23FD2F393781E9808745E7F2E8993A4A
-:108320003E3001F1B0E2DCB584AF95508E4FA69798
-:1083300099703CB7D9F0771C10C0A58CDD2AC6F720
-:1083400059C3E461DF81FE3F7BD94CE5937CC11BBF
-:10835000703CE690D5B30BC673CA1E50198CE75417
-:1083600036733F08433C65664137D0EBC60E950532
-:10837000A1FD55F00CC0F35422F3257A119F30CFA4
-:1083800002DEF605F8F7776D5B0E1B05F46DFCD386
-:108390005BDA48C66ECEEF991086766B2AC3A9D7F2
-:1083A00041BBA71F337B82D0EFBA23AF979AA0FCC3
-:1083B000C35CDF30A632366678600ECE67EDC2D081
-:1083C0002FCC00DF72DF33AE297A049F9D5A78B438
-:1083D00006DF77021E8330AECE7BD53921A2178B04
-:1083E0005F301E1F803DA83A7B81124C00FCB1EA31
-:1083F000A97CDE363EB6B5E746117ECE3658C71F9D
-:108400008076CEEA4E0FBEAF3BB788DEDFD27E0568
-:108410003DCDBD5708BE8CE7FC9AB96C13F2599D4F
-:108420000695E1BB3A47422808F399F76FC07F8071
-:10843000F2F50716F82B91EF0A14CF6878ACDB76CB
-:1084400085E0F3DDF797035EE77D92E26981F7BF90
-:108450006A4A076445F87FD6B905542FE1DCF5D4A4
-:108460009FE47FABE07733F27F14DFC3778CC17773
-:1084700081A2C09D88A7AAA7FFF9CC7FC2AB2BB56C
-:1084800070FE4F52F0E924FE89AC039BFBF15C5A6D
-:1084900007FAEA283E528F2EB1E8802FF3436FD3BC
-:1084A0003AB0C2736654F97AE4EB42C44CAFB6D02A
-:1084B00019791FFC9AFCBF5ED49F6365CBFDD89EE3
-:1084C000D69313DDDEE1A2AA073D50DEE151787BB1
-:1084D000FF43E3063CD910BF307E1FD26B7E996EFE
-:1084E000BA2717FB91E3E77CF255E36F13F55F556D
-:1084F000D9466CF7D519337A7CD0DE913B8B8B55FE
-:108500003DD2EFD31E0BB5370F6887EBA8EF396B61
-:1085100068772E8A11C614A8FFC9736343F7C01485
-:10852000DF627DE7713CC183F13ACEAFFE503CD5AE
-:10853000AF8F4B0829505EEFEACBF7C378661EB6C3
-:108540008791AF8E1CB66B0CFAAD28B9F169C4D314
-:10855000CCC363AA15E043DF41ABC6A0DEDF27F83A
-:10856000F6221F0C357E39BED8A79CBFE42BB95E1E
-:10857000E4FA90EB2176FDC8F570D5564FC277909E
-:108580004E8098C771FD68C1BD388F3A3DBE08D78F
-:10859000A55C47EB0F28B4CE40E87A46EB917524F2
-:1085A000D74D649D98080FF3849E186A9DD48975F1
-:1085B00071935817723D1C533B1F2C87EF661605AD
-:1085C000FE827892EB62DDFE58BD30245F31E4AB71
-:1085D0009B521A18F2551D3CA3F9CA3AC47A78077F
-:1085E000F923F5D2D743CF25F2D3DF919F26FDAFF4
-:1085F000F2D3DF916F06E1A7CFFF157E8AE597B32F
-:108600000D7F2AD1613C674B40CEE646F8EDAA9734
-:10861000D8F803F09E8D727A907FBAE3F83CBB2DB8
-:10862000D9A116AC778135201EA5FEBF09E99E1C95
-:10863000E153AF3730BC685284FEDD71C1C20D8595
-:10864000974E676B4A8FC55788F4EE31E8FFBA2121
-:10865000E83CA2E8EBD1D929EA7F159D3D455C6E47
-:108660003037D0B184E8A7235D63E98E7445BAD76B
-:108670001FB2EEBE185DD79704A6160D2227988F5D
-:10868000DB0311BA581721DF9C0D83425386A6AB3A
-:10869000B983E35DC26D614DEADB64D4B7C02F15C9
-:1086A000D8DF37E5977933E1D7E1083EB5D89705AC
-:1086B00074FFBE80D92F16237DAE2D93E54F77F83A
-:1086C000F250EEC0EFE5D4838FD908BF1C0EEE3D0B
-:1086D000510DF5AF7AB0BF3C88E5B32A12447BCC8C
-:1086E000A7B048FDEBF73D79E25E9AC736AE0F02C0
-:1086F000BD9A7F7C145C02B0330A2E8B8177F0FA2E
-:108700002EAD97B9A99D105FAFD0BEE2E5FCE38F17
-:10871000B2478092B313D19E3CA0B8EF01FA2FADBF
-:10872000F8C482F48ACCFF00CD7FFD4145C05D27AF
-:1087300070BE4B0F70B879DFC18EA026DA033CAF54
-:10874000136836772A3E15DA5D57A68446E60EC4CE
-:1087500073739151DFE18F66FC9E5952BEDEF7B80C
-:10876000BEE9FB91F47DD8FA35FABFAE82F9428EAC
-:1087700081F51E90EBEB3CC0B27DC0E522985FA86E
-:108780007060FDEDA2DD1E9349E0EBB50EC45F8F76
-:1087900045E2B3A7C35701F4671C7E745FCFE26064
-:1087A000211FBE2F66FE171B7F5BFFBA8FCC5F3782
-:1087B0007E1FBE18FEB60EC09FE09F5A233F25685D
-:1087C000FEE367A19D8414C58D76F17ABFFD5EB48A
-:1087D000FF23FCF167E28F1E3BEBE76723FFBFB986
-:1087E00018F97F3D93F5DFEAC0F5E337F5D7E7EBFE
-:1087F00041F2177C5F00FC8426327EFFDCBEBF7432
-:10880000041D441F2A2738EF22EBA13306AE8859F6
-:108810003F82FF69FDA29C07FC8C1E44CEBC29F060
-:10882000FBB1C216A39CECA9E27662CF48FE3C5F86
-:10883000C4EDC2F7041E4F8BFA3D715178C88AD03F
-:10884000197EC2E88744CD9BF0B42445CEFBCBC54E
-:108850007361DE3D49BCFCF3A2FFEE086645E0D83B
-:10886000F6CE157D497C1369FFFC09C4EB1281B774
-:10887000F3455F9C107CA5E0BAAC230601BE38A08E
-:108880000455F413902F0699F7F1817C158CF9DECD
-:1088900067BEC8F7BF1FB82E7D31DF3373C9D7F964
-:1088A0005ED06D6E0C5DE7C4D0B53A06AE9170C86F
-:1088B00020FFA45C5CD9F5405B1ACCE3963D0AAA84
-:1088C00099287E762CC1F5798B5BF2AFF30DB4BBA2
-:1088D00022FCEC227861A7948709DB511E2E407997
-:1088E000581E8117A1BC20D8BDC437315A5F24520D
-:1088F000F975EDB27E12C14B5B657BC9DB7D5A8495
-:108900008E2C98B204FB5B5222F44530F50DACBFBF
-:10891000F620FF7EE2FEB4372EBA1EB6C5E06547EC
-:108920000C1C8CA9FFD057E897D698EFEF8A29BF87
-:108930003706EE8881DB8DDFAF58A5D03A5C01FCAD
-:108940008084F8AA7539C3DB6FA7F6EB53C541766F
-:108950009B615D5DD5C2E12BF68F5AD2EE8882BD58
-:10896000A397041D91756166FCC79AC2685D9887DC
-:10897000909793BDB1EB42CCA72056DFF2F2BFE255
-:10898000AF19680733835D704C35C2475439EEE246
-:10899000376E2BC49712F62EC1F8CA553F36CE0B50
-:1089A000FC55017B96545744D925C1894B70FDCBAA
-:1089B00079CAFAB3BFB8A0627FCBBD13973C06E576
-:1089C0003555E1D10D30CE9A24FE04BDA6A2DEAC11
-:1089D00017F198D9CFA97ED46B3571E1D18D85512E
-:1089E000F3649DF938CF2377AA449F600BD007F03A
-:1089F000B492814300AED99184848D4F40FD63775A
-:108A0000AA1B518FBEB531390DFD9B835EEE2F1C25
-:108A10004B18917613C047E2975B74A87764CB2C10
-:108A20007A1E557D9BFB60AD7D6FFFF4258EB1589E
-:108A30009E40F8B9C35BBEA419F8FA2EAF4EF80CED
-:108A400024B9D3BAD07EBEC7CC1ED769FE3B896F8E
-:108A5000EEB316A1FFBCA2795C1ADA932B7FB86043
-:108A60007606D45BD966F628548F4DC07107EE990F
-:108A700065C1F255ADE219BC9C9E87BF7CB4C505AB
-:108A8000F5FB1E513CBBA1FEB4CF3A5F9A00F09AB1
-:108A9000F6511E24CDA17326E6867EDEE918135218
-:108AA000811FDFB537BC309FD767587FCD79FD95E3
-:108AB000F925585F756F82FA27E13DDAC327EF5633
-:108AC000772B382E97334E81299DFC427F05ED5A36
-:108AD00028776F82F727DB6E4E433BEBA4A2BB14D3
-:108AE00098FFF6FD7397A403BFACE9B00A7ACECD28
-:108AF0005801F35F61EAE717D21FAB1339BCDD3BC6
-:108B000077C9E330FE93DBC7B810CF89C5BE87BDF8
-:108B100080E7B78A7D3FF1A6E238B99E3AFCA5BA54
-:108B20001CEDF1DF9E5E9986FCF4B8583F87CEAD10
-:108B30004C5B1965EFACFE5823BA1FB6E8B7E138B5
-:108B40000FC7652BE82F03DD9317C0FA5D25FC0FD7
-:108B5000E0DF8DCF0C62F704BD2AB57B646B6A85BC
-:108B60006EE0E3EBDF40BE24BF01E05FEEBF6E3B93
-:108B7000EAB5F7AC1BD9BBB8F8EE828229F03C66A7
-:108B8000A7F89579AF3D64CFC5F8A76F36CA3D9673
-:108B9000DE99BFD019B5EE44FDBF049D54FF2F50A0
-:108BA0001FFDB7BF04FFEC648E8176FC1A973388F3
-:108BB000C6C4FB4EA78674784B6B3A79077CB7FA2C
-:108BC0001133C9FDD58FA4DED587F206F805E3631E
-:108BD000B1F3528BCD34AF21D761B0D6B80E592D39
-:108BE000C9EBA1D661CFFE35175D876B849F32FB41
-:108BF00011B31FD7D19A494E8D81FEA87AE4F9C7E7
-:108C000091DFD76CB07BAD30F0358F58895EBD4EAB
-:108C100067D00DE50197534B84E75B82BEAC98AFFC
-:108C20009B992AD36C5E7AB6629CF40C8C2719E06F
-:108C30000F363EF8A3C950ED4316BA7632E0EF0C7A
-:108C4000120CF072E6804AF143A6F9B479201F6B4A
-:108C500019970B752F3E63A9C4D935AC998B7EDD6E
-:108C6000CD21F33BBDC267BB20A689F2B49EBF02F3
-:108C7000BD6A2CAF67F77EAA4E2036B6E07AACEB21
-:108C80008C296FB8FC7D8CBFD433ED9D5E19AF8508
-:108C9000717CEE75A69C8C4771C8BC802176A6C1FC
-:108CA0009CCF608A6B1CB0AE60BE33772834EE3543
-:108CB0001BD59015EACF4CE671DFF79A80FE63680A
-:108CC000DE4137C06B1EE27A660D534236F8F5F28C
-:108CD0001D1B345C0FEB857C59A1303FF2F7BB764E
-:108CE0004F0EFAEBAB1FB1137ED7ECBCF98FDBE173
-:108CF000BBDEE67929D1FEB143F005B4CF6C4991D2
-:108D000076DE6FFE5E0EF2FFCC9F829F0BF35D93CB
-:108D1000C87EB12417E99591A33B22F5D66CBA33EE
-:108D20009FD7033F19E6BDE26E95E6C19EB592DE80
-:108D300083B59E4E7259E07355EB8B164B21CAE9F1
-:108D40007B7B54A8FF0EC0AA83F0151478B420BE14
-:108D500096E3B719FC9BF4526177EB24470238BFC6
-:108D60001A93B27C21C9F53E0BAEEBF26285C63395
-:108D7000B198DBB32B723C37501CF97EAB07E5147E
-:108D8000FEA8721CE057D5997A56633C97FDD24AEB
-:108D9000F191FA56BBCFEE22BFC3B71FC7A731CDA3
-:108DA00002F858A77379512EF8B05E5F7039F20D52
-:108DB000949FD0707FC5C9E5625D22E09DEB639F03
-:108DC00009FAF9047F1BC5DBCD9810D5BF22DE431D
-:108DD0003BBA2BD26EB789B5639C05EB8F9D80782B
-:108DE0004CBE76318EEFE72AAD6798FCFD6568E7EB
-:108DF000FD5C2D46FF76C5DDC7667720BCAFC88D0C
-:108E00004DAEF8C51F486FDC22E8DF8BF63EEA1155
-:108E100080F7C1735131D7FB0195C77D16097C4995
-:108E20003E90E575779B79FCBDCD4A764C5DF39F0E
-:108E3000A8DD3A674F1ACADFBA67CDA528A7AF15D4
-:108E4000E35ED99C5D7102F86AA539C1ADC0AB750E
-:108E5000C1791684D76D53088E7C979A837CFA511A
-:108E6000EBAF5CC83FEFDAC3A3511FF56DB07B7663
-:108E7000E30444DCEDA3D6D1BB313EB3CADDE354F9
-:108E8000A07CD56DA392507EBFE50E5BB0FCADCE4D
-:108E90005C13C23EB7BB02619F3691E08F40947570
-:108EA0000AFF13F96DBDC2E9BC6EEF31CB48E8EFA4
-:108EB0004E31DF8F7FFE877CD45775393DF9A85737
-:108EC000800FF23311CF4F29A48FD7EF557DF609CC
-:108ED000113E588F7C00EB6EADE083F5077EF51DEB
-:108EE0005C0FEB91FEDE817C047C7A9CDEEFDF354B
-:108EF0009BF1EF8F239F483D0670AB19E369160184
-:108F0000433F08DF85F89C44E5D5BC3C5848F294C3
-:108F1000F55AD0EEACEF32077BA3F67F86A2F3764C
-:108F200041C795CD5692BBDBC5BC7BEF7ED6857421
-:108F3000FCF8E7C75EC0FD92BAFDA0ADF541D6854D
-:108F4000C04B3DE2C145F320FBA21EE7ED8AE0A144
-:108F50009FFFC57AAC677C9E72DEF59AC0832C17A2
-:108F6000DF3F2CF8661D13783B3086AF3FB1DE70D3
-:108F70003DA35C95F30B24F1EF259F1E2EE67A614D
-:108F80008F78AE03BEF01412FFF82C524E40D1C7BA
-:108F9000FB7651FC47D24B8EFBB5883EF12526452A
-:108FA000E8D86B62B59D83C44DBA04FEDE6E1B9695
-:108FB000D30578FB08FC2CB4A7905FB5A8FE24DF8E
-:108FC000C8FE663EBDE04A9C2FB41FC6F665BF6F63
-:108FD00005E3356CE72DC6D707F227CA4FB92E67D0
-:108FE000B62CBBB2C885F53E768E423B46C8B3D799
-:108FF0008ADDF4BD0FED05F8DED7A550FCF96DE173
-:10900000D7BFDDF62BD7CA283CBD2AC62DF90C7F69
-:10901000302E25C7DB9DC4E3B9B1E39672488E7B41
-:10902000E696EBAEC4F772FC925F257F4A3C4A3E5F
-:109030006577A5925D13CBAFC46B52AFAA06794F8B
-:10904000FAF1F2AC4F2D01C7C0F7B1B0B487DEC55D
-:10905000380DCA8F27D510C98FD6F4E379517A1EFF
-:109060007E1CD17AA779C3E5EE4ADC7FDDAB78D0F0
-:10907000E489D22FF76A51FA45DA0525252309EF4D
-:10908000F529BE0F908EEB4EF5CC76E9113B74DAE4
-:1090900067613501E3520772BDD1FA74DDE9E3C4BB
-:1090A000FF75AC6733FA512BEEFEC3BCC9C8E74F5E
-:1090B0009A697F6645DB2C0BDAF5373F7E6329F230
-:1090C000D13BEDA348AE7FF0D8A462E22BE64EBBC5
-:1090D00016F87FD5630F5EBB14DEAFEA523D24DF86
-:1090E000A11D5CB72B6E2F66C837EFDA7BE795A31F
-:1090F000FD7E87EA46FB7DEAE393EEC2FA539D23A9
-:1091000012711EBEC79209F66909A41FA4DDFB9661
-:1091100090932D66CE1739257C1DA59670B9915A6E
-:10912000C2F966664B4B3EEEA7F7ED02F98CFBCA1F
-:1091300016BD338CFD3D378CFC8B7A7087D281EE67
-:10914000A7146E97D55A982DC34BEF6D19F0FE45B5
-:1091500073CFEDA8475EBCDD59D48C0350CF97AEDA
-:10916000E4F634DF3F4CE6FD4BBCC9716497707E7A
-:109170008F6D4F7EDF8D7E04CA5331FE0F5A9FBC28
-:1091800016F5E0077B4627E1BCDF7FCEDE8EF6D406
-:10919000FB662E1765FB60E7BD176DA7815D6780D5
-:1091A000C18E33C0C0BFEF19EDC24D34AE8925600A
-:1091B000C78D63FD769CE4F79A0DA313A2F30862B2
-:1091C000ED779617BB6F3339810D226FE4F374137B
-:1091D000200A18F52CEE1142BFD5F15F3CD383F67F
-:1091E000FE36ABDB0AF37C0FF91FF7A59E5543B89B
-:1091F0000F83B639AE87F7F61585D08F5CFD6660B4
-:1092000036B67FFC812D94677013D897C39428BB22
-:10921000F9A107AE45F63FE3096CCE80EFCEECE155
-:10922000791150EC88B1975FC8D0FF757BF952ED8A
-:1092300064196FA82911F6B2877910CF12BFD26FC7
-:109240003A0C7C50E68DE0EB6F4DB564279F6E0ABB
-:10925000D0F313E5EDFBA722FF3A133CBBE1B3DFEC
-:10926000763DA866229D0F149D47BFB7DC91E0C6EE
-:1092700075FBB7A68DB4F978BAA9819E92CE32DE7D
-:1092800036EDC011FAEE6F5DC507A7C277871C09DE
-:109290005CFE0FD8EFE1F48CCD03B975C3E461F83F
-:1092A0005ECEEBC33B385DE5B83FDC73A30BE775DF
-:1092B000E427C907A7203DE313DC68EFAD11F91FD0
-:1092C000273BB83D7DCA96F0C45CCC1BD9B1288D34
-:1092D000819CBDE9C8B7AEC5F7AB9F53DCE8077802
-:1092E0009E5BE042FFF4BFB45E971B9FF05D18C722
-:1092F000A385549447E57318ED47958735A6E7D2C3
-:10930000562FF1CB94D35A08F3463EC27D2A8C8760
-:109310009C8FA3780813FB4F37FD9AC751FAFD5B6A
-:10932000E1DF4D15F3EE2A4992FB0AF47E66197FC0
-:10933000FFFE8E67E6637B1F3C6676E3B8FFF69818
-:1093400099DA5F0B7E9909C67B6A0FF777D6762A82
-:10935000E4277FB007F435CCAB6E83D9674918C8D2
-:109360008733A1BCD711E1C3B5BE10F13713FC6838
-:1093700083FF2E8C1CC88F89AC7333E2E35FE5CB8F
-:109380005FC4ACFB7E7E1C8A0F04BE701D233F4A67
-:109390007AAFEDE0FBEA499D4595C85792FE524EE3
-:1093A00004AB5801EAD5160B2BC03C9CA029CE83F8
-:1093B000EB7B8143372B80874529BDD5284E33274A
-:1093C0007139ADCE34F94CA85F5AAC240762E5C8B8
-:1093D000EF845C9F8F3C0DFFDE2DE1768499359004
-:1093E0001F229FA077B2517F2F884FFABB0E55FEE8
-:1093F000FD40ED520DC6BF606AD2EDA33C8CBD7935
-:1094000060FD520DF8774171D2B323017EABA48E7B
-:10941000C313932699016E6EAE5F5A0DF5FF59E2A4
-:109420007BBD24AA1FD92EBCFF8F1280378D0B9CC9
-:10943000C067BDC54172FA13A56FC2C6DC48FDD72F
-:1094400014F6D66F9508DC6B663968DFBD5B22C702
-:109450003FF8336F92EFED9241DEAF64AC0DE32A3B
-:109460002B83BF3BA1703FCC6F037A5D2DF86AA5BB
-:10947000CD11267FBEDD7CBA9FDEC8479E040DE974
-:109480003A5FF0D1D55AF8087E3F96B5BA4FDAC8A0
-:1094900084DA71217968F90D0B8F9D94ED01BF7C01
-:1094A0006286F9025F2BC09E1B61C92880E41A9076
-:1094B0005FCAC1DFFD03DB6D09B25E3BD1A1C68D82
-:1094C0007CA6B080E9023CEBE25D13306E52179F40
-:1094D0001342BE6F7CF6E3E3C85E374BFB25504674
-:1094E000FC7E9B9BCF8705CA891F6F17FCF87E13F4
-:1094F0006BC883A577754F8F4B87419F9E1FCEC743
-:10950000F5FE694E206E12FAF93B5AB21A817F3E7F
-:10951000DE6FF5CC85FAA742CF501C6E9DB047D9BF
-:1095200063A962DDABE11950AF3B77EC6ED42F2914
-:1095300093385F9DCE0DE7DC89722397FB3F508FF8
-:10954000F2DCE66CBA3C15EB9DDEB725EF26A09F5A
-:1095500055634167123D990BE67D05B45D06B01970
-:109560006095F67343442FACE7427DAFDF98CEE3BE
-:10957000EDCC8F7245D24BD261007D600868AF9A06
-:109580006CCC8CE31FCB76B8517F483ABD6F033C5F
-:1095900062FCCC067884F53D0B830E25884F1E6F48
-:1095A00069547A5B9311FEB942797303F5E0E316CF
-:1095B0004479ED8E1B49FE48B9A3C37F83C99DAF93
-:1095C0001D37DA317350B9336D92D08345ACE80260
-:1095D000371089BE6BC4B7B3D41A5DC371A7DA3C28
-:1095E000184F6B7C6414E91BD6FA07165D8FED48A3
-:1095F000267ED99CAB12DE6FEE5228BF715E5726D5
-:10960000D3A1686E57323D5DE732E8FD074FBC5489
-:10961000C2E512A7CBBC9F0DABA2BCA29F8DA1A798
-:109620001C47A3E0BB596A616718ED08078C03E08B
-:10963000C617B9DE6ABC46A5B82643119D86C4E4A8
-:109640003F7E473BC57FFCACDFBE572E509C564F3C
-:1096500040BAF8BB5586FC03DE4690E3D9D68C7839
-:10966000B6A69B983E88FD611574B2EB714C8FF2E3
-:109670003BB4E0D8EF57603CF65B664F08CA5BEC42
-:10968000AEDDB89E58D0D783FEC262F15D8F9DF3E8
-:10969000477C4192E1FB2DAED9DDC86F8B7D5CEF3D
-:1096A000383DC30DFD5BD57566643216E0F6A2E465
-:1096B00007E24BE8F76ABF42FAF59AC5501ED5AEED
-:1096C000B9E25392E3E60AA39D69F51BEB7D6F9225
-:1096D000D03B63D9D868FA47F0EEF0A19D7EC6E78B
-:1096E000243E06EDFEE30A80AFED36339CAF358EA7
-:1096F000CFEB0C620AE3A23E3584F1922D88077805
-:109700009F5066C467A2CF88BFE439467CA4FA8D17
-:10971000F31FB678A4A13C237099A13CB3D66B800B
-:10972000B31BCA0DF5476CAC32C0B9C12B0DF54760
-:10973000B52F34C0A3B72D35D41FD3B1D2503E3688
-:10974000B4D6503E6E4FA3011EDFF95D43FD895D27
-:109750009B0CE545E17B0CE5C5DD3F30C0937A1EEF
-:1097600036D49F7C62B7A17C4AEF5386F2A9A7F654
-:109770001BE0697DBF31D49F71EEA801AE642F1943
-:10978000EACFB4FDC100CF72FFD950FFF2F4770DDC
-:10979000E557E81F19CAAF2A386BE4D7382EFFE621
-:1097A00079FE69F84EC90ABC3C096D04F5B4867CA3
-:1097B000DBB24C61C9184FEF5E644339F08A9443C1
-:1097C000820F9F47FD8CF5F3580ECAB3596A4518AE
-:1097D000D7ED992E85D67FACBED33EF2FB309EC727
-:1097E0007EA57830CE96006A4B8BEA3FD16703475F
-:1097F000320227CF711BE0547FBAA1FEB0C5BAA1D7
-:109800003C23506028CFACF518E0EC863243FD11C4
-:109810001B7D06383738C7507F54BBDF008FDEB65C
-:10982000D8507F4C47C0503E36546B281FB7A7C155
-:10983000008FEFDC68A83FB12B68282F0AB71BCA3E
-:109840008BBBB719E0493D1D86FA934F840CE55355
-:109850007AF718CAA79EEA34C0D3FABA0CF5679C07
-:109860000B1BE04AF6A2A1FE4CDB6B067896FB0DC3
-:1098700043FDCBD3DF36945FA17F602897F6CD55AB
-:10988000059F1ADF0B7B679EE71F86EF83553E8699
-:10989000FC11DCAF785A74C60A4B47927D0172BD49
-:1098A000D7AEA27DE4A7B851122608025F26801029
-:1098B00043BE4257A186E24F2914F725D5A463BEC3
-:1098C0000FD8090024997273D19E8E8FD86D5917C5
-:1098D0008A2FDD6E2B2F65C4E73797062696A6A242
-:1098E000BFB26F36DAED37B3E0661C07E8BD845EC1
-:1098F0005C1F76633C433EAFB0015EA2FA7BD1BEF3
-:109900002DCB7B11BFFF0ADB69AADFDFAE8873288E
-:1099100030BFC6A8F6EF07BF4203BB6E5B13AC1B9C
-:1099200070187FD0E426F8A1A674827FD4A4D3B3A4
-:10993000A3A9809E0F3779A87C475319C13B9B7C14
-:1099400004879AE6D07377939FDE3FD6B498E027DA
-:10995000C08FC6E71EF0ABF1F914F8C758BE17FC6C
-:1099600065847FD114A46767533BBDDFDFB48DE00E
-:10997000034D1D04FFB22944CFAEA63DF4FC4D5368
-:1099800027951F6CEA22F8505398E0705337C1476F
-:109990009B7A083EDE7482E0179A7AE9D9DD748AF0
-:1099A0009EBF6FEAA3F2979BCE11FCA188D7AE2988
-:1099B000E5F12289170933564DFC20EDC3F968E71C
-:1099C00023739499FF66B0F363ECED587AC87ECCAC
-:1099D00055181384E7F0FCDD2D517ED6ADA2BF2DC6
-:1099E000712C68077E6F3671BFB63989519E351369
-:1099F000F6EB1AC1972C85DBADABC5B8D688F53030
-:109A000009F9B380F8F3E5AFE35748BFF14C61A023
-:109A100085F833DB1424FFD911CA47FB39757C6004
-:109A200073E924DC6FBCE905EACFEDA17DC779D6E7
-:109A300070EA75181F7951A578DE50FDD58BFCF1C1
-:109A400021CB0F7D9085F6F69C2FD500E2E915B36A
-:109A50007331C60BB69772FF747BA9C9F0FCC9F8C5
-:109A600040078EE77367C30D2618FFE7D3373C71B5
-:109A70006B6EC49FBE1A5D52F0831630DD4CF989BF
-:109A8000CCF77C2E34750D1858085FC782F4CC2AA9
-:109A90000CECC2F92E01431CE140B93567B079C521
-:109AA0008E6BAF18D75E311EF97C717CE0696CEF6C
-:109AB00073A78FC6F5CA94CBF3715E725C71137491
-:109AC000719EA16F278EEFF3E73E3DA98C8AE05F80
-:109AD000FAED9B2B455EC90685C7E5A4BD26F2526B
-:109AE000A4DF5173BB12427B7D19F83BB8BFF4A6CB
-:109AF000B03FDFB473FD7CA6C15C80767D8D12E73C
-:109B0000C17DB8330DFFE540771AEA33DC2769C120
-:109B10009C03286FB943A17CEE1A68C704EDD4609A
-:109B20002010BFBB4B21FEFB627C2E8DAF06CC3FCD
-:109B3000F2B352FA7270BF14F8E545A4C3DA296A89
-:109B4000D002F6F02BA650BE42FBD237591418E7CC
-:109B50009A14E0939143F3C37A71FE40BE073EFB33
-:109B600003B6F7B75F4F2EA038FEA1293AE2ADC584
-:109B7000C4CF23057FAF7A78BE0B17D5EAD4F11492
-:109B8000A7649AC78371A679E2FCCA11956DDC3788
-:109B9000881CFDBBA0DB2BE9E639216AD7B85FF34F
-:109BA000B1A0E3C7A2DEBCA32F66E3F9ABF5DD6687
-:109BB000B24758496FA1DF39C87C366EFD765E1416
-:109BC0007FD777BDCDF335586F61747EBA6B326F36
-:109BD00057F2936A71067639A2C7D7CFDF9F117FFC
-:109BE00027027F8F22FE3E89F6F67CAB9E701D3CDD
-:109BF0007B01456178067EEAA67C239977B48AF9D1
-:109C0000E9B906D801F9D91F7CC082F85FCB3AE9DF
-:109C1000FDFAB21B7310AE677DD5E9E84FB4373F4C
-:109C20009F0EA35CB4ED8159189F5D185AF13C3E1C
-:109C3000173CA69C44FF15D6877932C64F9486B64A
-:109C4000E1D0DFD2BD956D99F07EBECAE9C15EE27A
-:109C5000F400BEF1A94903E709EBC13999E6E1A394
-:109C600079A8AE3986F550B389F9949448FE7CFF03
-:109C7000FA28BBE5AF99E80F697DB4FF5E7FC89A0B
-:109C800084745ECBB8FE8EC43FA4DE66C4E7B7B072
-:109C9000380FD6FB50F0F587D98CF8FA43051C3CF9
-:109CA0006FC49E64398174EFA888FEFDD0142A75B4
-:109CB0008D22FD9C87F37D217D918E71B35B526C6B
-:109CC0001E15CB1343397C1FB55FCEB30BF191B892
-:109CD000D7FD661E878A1D9752F6C23FD07EB05AC6
-:109CE0005810F737607DB3525CD7C32DB4AE5A100D
-:109CF000B5183FABF2EB83B5DF2ADAEDFE82FBC18C
-:109D000041980F9E971CD08F5BF413C7FB917A0488
-:109D1000FB233992C60CFDCDC22417A0CB2B4E1FBE
-:109D20008DBFD9944872E7E311816AA4978CFF48EC
-:109D3000FFB03BF7FD3CF2E3CFB764A19D0EFCCB37
-:109D4000F312A773F9F48A590F22FC4A652EC5FF56
-:109D5000A5DCBDBA8CC7CBAE96F1B18A98F8584C49
-:109D60005C86550C1E2F63CC63C67EC7B237257E3A
-:109D7000281E73B44223BA0781EE186F3E2AFCD422
-:109D8000CA78EE9F774E4E267E4ABA226FD07D1556
-:109D9000F9BC47C457EF053B8845C5D5EF2969B4E1
-:109DA000619EC1964285F6BBEEAB8AAB8DCE73DF6A
-:109DB0003BCDCCF753A757EE44BC153A4255A4AE61
-:109DC0007D9A8EF350C4BCC6B901EF266CDA2FE23F
-:109DD000A41E1B8F4B5593BE96F4BE547DFD941666
-:109DE000DA1487F34E61B4FE9C1D7692A36AA72F06
-:109DF0008C29D75F4E5B7827D151F317603F474AD4
-:109E0000E39803EA7F7EC442FEFD21D3CA9F623EEF
-:109E10007CDF1B5686FB9E9DCE4C0DF545E71797C4
-:109E200055D3D3397536E371CE7813088822377B42
-:109E3000F4DF9058E2DC59A7C2BA19C5DB7CF126E1
-:109E4000F0C13A4DECEC0C18D77E87F7C189C4728B
-:109E50007E15E7D95511B81FD753296B20F83E8BD3
-:109E6000BF7617F47B5F928DF8C45FE17F808F939C
-:109E7000B5CD85F14D9FA9303CC7DB6601B95C8843
-:109E8000719238BE27C5B87DEF3F974FFDEF98CC54
-:109E9000F7F95AD37D3D78606448BCB9B5BEFEB8C9
-:109EA00008F15B16C5F3241EA3E9E52E35D02B601F
-:109EB0008EA65719D06B7C34BD7CCAD7A1D7ED983C
-:109EC0005C3669207F06ABF407AA4BB85EC314B9B1
-:109ED0004A6B7621DAEB47E2320BA3F7F5245F4AAF
-:109EE0003E1D843F371C43F990A5B9317E6A9D170A
-:109EF00047FB2D925F259FFE754A3FBF7ACBE1B9A4
-:109F0000CCE19F853224965F311E16CD973543F202
-:109F10002F7347AFD7F9603F2424A1DD73EAB1CE98
-:109F200028BEAC69F854E3F2E3C28CB8D248FC6EA8
-:109F30007E85C2DE89A62FFC7BA740CC8FEC1E8DD0
-:109F4000FC2D89C74BC5B7F95BCD0568C76DC6F356
-:109F50008980AF76C5E31B8671AD86B76FC5F76D97
-:109F6000E27C70B0D0C2ED2BB14E647B5F4EAB7A19
-:109F700007F9D639F974FC6AA8F7799A4947E4B425
-:109F8000E92BFF8DD6DD897886DFB9927B6A1FA524
-:109F9000753486E1FEE0E7370746E07EFDDD40A749
-:109FA0007728993A34CC447B59BDC3701D0172D3D4
-:109FB000F93390CEDF33511E22F83B53460ABFC31C
-:109FC00027EAF752FDBB2DDB6C71D84FAECDBD3B00
-:109FD0008ADF6788F83A1E23E7FB672D3ADA657A4D
-:109FE00019D7BF0F36ED99F6DE681C4FE7B4F7605E
-:109FF0003CC973432C007C1C5710D43105C4F6E5D2
-:10A000004C05CF2FB0CB5827F20DBE6F1E1F69DF56
-:10A010005CC6D7990DED15A09F6D53504F8A927F66
-:10A02000369312182CDFE58E291AFF6E13A372DB0C
-:10A03000D1ED749E3F39CFA360DEB36DD33686FB7E
-:10A0400031F6307F9F92E7535645B59B3217C61DB8
-:10A05000C517F3F12401C81BDB6E60CC12A4431CAE
-:10A06000C51F63FB9D9F5AD5ADB986E693587E63A5
-:10A0700082DF24DFC879D2C994A873F9D523B93D0A
-:10A08000DCB6D1B20BEDEDF2B244C2EF672955094F
-:10A09000EC227A6527F041D08AFEB18D9EBBC1BF0C
-:10A0A0000E8E41FF389DE027C0BFC6E71EF0AFF11E
-:10A0B000F914F8D758BE17FC6B847F01FE35C29D9A
-:10A0C000E05F23BC1FFC6B840F807F8DF02FC1BF2E
-:10A0D000C66717F8D7F8FC0DF8D7587E10FC6B84CC
-:10A0E0006758813F703E05C1F48540D7F63B2C3E52
-:10A0F000CC17DC20E87ACC3732D903F4B71798288C
-:10A10000F66D7FF9070CE7634F37D1F9AFCDE93F23
-:10A110006037A2DF5AEA24BBA9EDE7DC1EB16B0F62
-:10A1200032943B3B95602DF330B6B86C6C0DEEF37A
-:10A13000E5A56FA84A02F886B2893B6CB03EF2F5FD
-:10A14000058B9BA360DDE95DBBCF1D814714EED27B
-:10A15000C03361377615EDC0A33F380ECC13AE2B5C
-:10A160002BA96906160A8F646457F4E55A283F67DD
-:10A1700015D26B348E9FC70DAF622DE9B86F39428F
-:10A1800007EF47A1FA619672E9F53794E9F43EF6D4
-:10A19000BB8BD533955C523DA65EA43D2C572ED289
-:10A1A0008E4D5964EB81B16F350B3995EA2039D565
-:10A1B0008E711CC07BBB9D3FBBA7F0B8C1AE2955BB
-:10A1C000DE29F0F44EE1746DB707DD55D8FF781342
-:10A1D000E52DB08DB97F1809FD7DFBF71AC3BC4F83
-:10A1E000C99FED820F468F70D2F97B76A78DF6ED71
-:10A1F0002F1FF1F3D62480473FEAF1607EC356E675
-:10A2000089433E09DE6BA2FCC6A74B46252D80EA9A
-:10A21000E3263D9B8472FDA49037219117D4DCB6D0
-:10A220007A04EAB1CF5FE3F2F0C7423EED32F73491
-:10A23000103D2739C8EE606C1BD917CDE9406CD0B2
-:10A2400091A60CFEB498DD4BB19E050C01CCBFB6B7
-:10A250007C31D9867E5DCB39EB1C9E1FDB43768734
-:10A26000C51E7027C2FB6D4113C98516DD41F96C0F
-:10A270005B1DDE6E3CCF1C749B28EF756BA189F0D3
-:10A28000D8EAB83684F6BCA634D7A21E0BB9F7DBE1
-:10A2900072E17DA8D044798C21DFC2390807031A06
-:10A2A000E559D10F960792E81CF756D6F7D2442C01
-:10A2B000AFE176575BDA7F1F8DC738F7356E0FDF5A
-:10A2C00056613AE681514A9809FDEBDE4DF1388E30
-:10A2D000254CF8AD41F2535D564EBFEF1FB9C23D5C
-:10A2E00092EC8AA8FD2B2BC6E43C360F944F707875
-:10A2F000E7A01FA939BD36CCEF6B757B6D2B68FECF
-:10A300003C2F8DF22FA0DD16B789FC592CBFB190E0
-:10A31000D4E1F1BC529172AFE3BC7F7004F1A1DDD6
-:10A32000C458AE8EE3D382D1FB83B65115DD3ACC4F
-:10A33000A37D7512CD43533C04B39B341AF7703D93
-:10A340008ECE2F3F6899D78DF6E170DB2DB48F95B7
-:10A3500051AB19F69986058C70EA62239CCCB4C87F
-:10A360003E15F4FBAEE09B58BCC5E223C3DDFA1AF0
-:10A370008E3F2340876B078C7FBBFBA1C44A86E3DB
-:10A3800074D038D31C2B2BD17E4A65FE66E4BF7F88
-:10A39000759C13DC0B6DB9D0FF84141399471359C6
-:10A3A000DF266C77ABE0F7F65C4ECFC8BA5239BF08
-:10A3B0004FA9CA9C928AFB042670CC22EDE706C105
-:10A3C0004133EC132419E0D1DB861BEA8FE91869CD
-:10A3D000281F1BBACC503E6E8FD7008FEF2C37D47E
-:10A3E0009FD85565808BC2571AEA17772F34C093D0
-:10A3F0007A961AEA4F3EB1D2503EA577ADA17CEADB
-:10A40000A946033CADEFBB86FAD29E8FD58FA953E8
-:10A41000BE991D6F4D1F6EB8C726D64F88B5F36D18
-:10A420005FB6E89B909F5D16E2670DF539EE2BDF76
-:10A43000C1FD21DB748F8EF2255EC8D357A6FB4683
-:10A4400022DD2A5D36D20B9A83D7D31CB3C95EC9ED
-:10A45000E9B0D0FD3A9A9BF597C7A37C6E0A4ECB24
-:10A460001B1D19B7DDBD8DEEA9A874CD61987724A9
-:10A47000BFD7DC3E1670627F3AB793DC41AA67D73C
-:10A48000E1FBA8791C32999803E538F86D181F197B
-:10A49000CA4F93FE99F4CB86F2C7A41F96636271EC
-:10A4A000F8DCA5F4DE8A7E7A61C36B55C318F96BBC
-:10A4B000D5A847EEC3F3D9E8A74DE076565BDA9509
-:10A4C0003AC66DDA733BBB47E278524D141705BBB1
-:10A4D000D9B330CA5E5C2FE8A98D6CEF45FDD798E3
-:10A4E00068D3D15ED26CBBA6BD07F8DA69EE7D12E7
-:10A4F000E310AD8A7B5D27CAC53B1C94EFF1A0C079
-:10A500009BEE34156F82763B9B7D1A9EC3EFBC9BFE
-:10A51000795A717DA4546E4A84F7A3B3569830DCFF
-:10A520003326AF79133E03C25E1E5BB8CB940CE5B5
-:10A53000E34A2A17637C4B75437F178937ABAE0E0E
-:10A5400086F36179DA49E42BB4EE2FC0D02B936CFB
-:10A55000B4FF68477A2BF4243CD8CF39427684F391
-:10A56000385EEC3E2514AF70BB15F3E52A933A88AC
-:10A57000BED29E453B17DBF75704D6231FA5CC352B
-:10A58000D255B33D46F8D86AE2EBA23D517F19F5AA
-:10A59000737B6E5E12EE5BF5CB112157EE10FA5312
-:10A5A000BE9772E523F41D5223F60DF07907C6D944
-:10A5B000ECDA363A7F69BF6B1B43BEB6E36975B20E
-:10A5C000F783BA9FF487DF906F563D72B10DF5F5B2
-:10A5D000D9142FD9B3F68DBFA4F1C5E2CDDECBF3EC
-:10A5E000CE86C2AB2BFF61D2EF2080753CB77334AF
-:10A5F000CD511B1DDF94CF6421F7CD323F083C09BC
-:10A60000D4676765FE912F9E8F2F91C3C7F297D2B3
-:10A61000F86E4DF50EBB98BD6D077F331045F7BB47
-:10A6200035BF0DF1D0767EC11C9AB7468B816DFD8A
-:10A63000A27017C58D85BF942CF0AB233E018F39D6
-:10A64000167E5EC0933297EE2D93718FE7A724514B
-:10A65000B927C8541EAFEBCF4F375D984863D52D4F
-:10A6600052EF9229CBF514FC7F04F35246B56BC62A
-:10A670007C76A1C7A59E1EBDCD583EA6C3088F0DF2
-:10A680000DF8FEDF51CF5FC37F073D602C7F58E898
-:10A69000EB6B505FE3BED5B7785E880D467481EBF7
-:10A6A000D988DE033990DD19AE44B199759B66C82F
-:10A6B00027191EA30FFD153AE1CBDFAD9951CFCA83
-:10A6C000B84CAC1C56EE3CBD01D74B657CBC8EF241
-:10A6D00013E318012BF7CB03E0A7DCA779FE548323
-:10A6E0007E55B74AF952924EB1749D5A2EED5CFFD9
-:10A6F0001FA7907FDC5B8CFE3AF61788EA4FC6579F
-:10A700000E4D0FBC89F5649CE5CC1CED79458FC4DA
-:10A7100051645CC03B85AF9FAD9ED71B8EC1388E08
-:10A720009DB0520C6496FA727713E643656B24BFB2
-:10A73000DC93D7FD14FDEFAA3F4339CCE398AE0F6D
-:10A7400023BBBCDB4C71802AC1C755C2DF92F19696
-:10A75000CF843EE99B22ED9C601CF7EBC37168BF80
-:10A760008EDB03B2D748CF785ECEE36AE33B63CBA0
-:10A770007D94A77499E017CC2FAB4CC3B42E0E7701
-:10A780003225D90D749CB8B8F728BA0E852F3E1F14
-:10A79000877CB8CFCEEDB5A7043FA431C58379F847
-:10A7A000697B1C9E10D473AA6C5F0FCCC3735C339F
-:10A7B000E4934D3868840B59149C8BE330C2F7EA5C
-:10A7C0000DB8C5CCEEAD019B1CA6EC28177947F956
-:10A7D0002C1FF96B96EA2842FFA9B1D2C110AFD65F
-:10A7E000B7C7FCB807E5C56BFC7E2A77BCFE4035D1
-:10A7F0007CEF7E29D9D3AC47E8FF14F8D1A81F7E9F
-:10A8000074C1C35ACD51712DA0671EED23BBA9BCE5
-:10A8100013E88AF07EF0ABF3681FB980DEFF12FC0C
-:10A820006A84BBC0AFC6E76FC0AFC6F707C1AF460B
-:10A83000D837BD722CC6C3DE847AC8177145076C41
-:10A84000A3309EED50E97C4D2C3F6E6978D7711D89
-:10A85000C8AAA91DD97353911F6E53E91CF2D8DF02
-:10A8600064CF45BF353AAE161D578CC4D57A15193D
-:10A8700057B3027D5E98ACF3BC45195F0BF0F8DA74
-:10A8800057B7E393ED50BC72403BFD714B5BF0BD9D
-:10A89000023C9AA5B00478FFF11DFFF904EA99D4AF
-:10A8A0008CC0549C77DDA4772CDCEEE6E7A6B2C41E
-:10A8B0003ADA61E779A35922DF27365E397DE6DB94
-:10A8C000B7A602CAE6978F5986FEFFF45BDE2ECE4E
-:10A8D00001F887E53F588679BDD37FF6F633998036
-:10A8E000A77FFE66112F7FF0EDB3591ECCBBF8DEBB
-:10A8F00032CCF3752573FDB6439C3F92F8BD5EAC38
-:10A90000F7FA8D8F921E073B83213E5AD2FCA45F3B
-:10A910003F49E973AD80FAF5A97D692B2FA20FEAB3
-:10A92000373E41DFEF503CA74238EE29369E5F2A82
-:10A93000F4CD19C1BB52DF34DA3928C7C3583ABD48
-:10A940007F50C481982F93BE4BB673F898AB9CF49C
-:10A95000D2FD55FAAB3ADF9F24FFF898EBB2EF63D4
-:10A96000FE5CCB1C8DF60D1F7478EDA8B7368B7985
-:10A9700041FB41CA539965A3FD1C96B298D67592C6
-:10A98000EC27A586F20E92C4788E97C785313ED00B
-:10A99000526DDB8D72F4078E91D45E4B99258871D0
-:10A9A00019096F2A87F1003E135D49B9D49F90734E
-:10A9B000326ECC70F70CDAAD12D3AE92F90C36F3DE
-:10A9C000E968FBDAC17A887F3C265D45FB3079AACD
-:10A9D0004EF2AB987916E37B8BD2104466C479981B
-:10A9E000A2E7A1571BE7A1CF32CC4369B485D12E92
-:10A9F0006C9905F380FAC79DA534DE58BAC9F97C75
-:10AA0000B79CF373EC3C99D83792E704AADC15079E
-:10AA1000705CB34CBE561CD7F3FFA849C10B23672B
-:10AA2000B3060DDF8F8AE4EDB47E9DBC88E9EF2A82
-:10AA30007C9FEB160BCD6FE7348E87872DA15C3A98
-:10AA4000C0A18532707F77283EEE2AE7723FC2C7E9
-:10AA50003E86EBAB25C9C7F9D8DDE76A463E4EEC2A
-:10AA60004BDB44F30A0F4A9F587E8EA5D731BC13A7
-:10AA700081F4625045FC7F157D255D63F7BD24BFE1
-:10AA8000244F754B7AA7D33CC33986FD4068411FDC
-:10AA90006C1F7C33B4A747ED9F59D2FD64679B536D
-:10AAA0003C05186F6EF9521DF47CE45981A7665776
-:10AAB0001CD9DF2D2E6E7F1F715D69F09BAAC18F9F
-:10AAC000C2FD62359975E2BA521396521C4D1D862D
-:10AAD0009617B185D1AE4D98CBED5AB7F7A2E7A442
-:10AAE000B45ED5707FDA00BB36E94A6ED7BA2C6403
-:10AAF000D7EE705A16EF1A44EEBC54CEFD9F2338A1
-:10AB00008F41FC46F017299E29FD458B3B407E9FD7
-:10AB10009CE74B82DF657DABBB81617C4DB5787472
-:10AB2000B46355718E15F3970BA2EC02D9FF0BE5B8
-:10AB3000FC1CFE33D339FD641EFBF4579586C1F02F
-:10AB4000AE4D9576C9E07CF72FF00DC909AFC3E291
-:10AB500043BBC3EB48A77CEFA1BEC3ADEA53491189
-:10AB600039E3F9B254257DA479287FBFD3DCFBCC2F
-:10AB7000ABE80F3EEF20BD23ED71305629FF18FCE6
-:10AB80005E9F071AD9F74F5889A688BF0BFE57F664
-:10AB9000D4A8FDC7A38D2769FF27D64E8D8D27F436
-:10ABA000AF73D713B97C1CA10C5CB74A63D930E4EE
-:10ABB000A7D8752E9FD9E9C597AD8271656714D165
-:10ABC00053BE7F84A97306BB1FADA41FFF5C3F8FDC
-:10ABD00085CE1254D2CB2553818E1FDFF67A9A4749
-:10ABE000C773B49F927E3ED35096B005F9BC2089BE
-:10ABF000E46A96381F26C79375F391C42407E6E9E3
-:10AC0000F58DC5FCB65093FFB26A33F917BEC1C6C5
-:10AC10001B98CAF5110B8F60D1F7FFE8293D578CBF
-:10AC2000017CEB0E9347A775E526BD27D77FA59638
-:10AC300058ED06FECE6E621E878E5723BB291E96E8
-:10AC40007D41253ECB3EC6EF6F1E91D2A7E0BD5B96
-:10AC5000FDFD883C26B9AFF2594335ADCBEC618C94
-:10AC6000F550DCD24FFB0F9FA58417E0BAFEEC2114
-:10AC70003EA2EC478DE5A06B295EBDFAB6B8900EFA
-:10AC80004D8FB80BC687E3F9A9C2B272711CC772A7
-:10AC9000B760BCE757F114EF513BF2285EB32623AF
-:10ACA0003007F9E1E390FE6DD3283159A857F79D9D
-:10ACB00038BA2F6087D27305E54BDC6E628F0F12B6
-:10ACC0008F5A3395FB89B582CFB3D34B39BDD34B64
-:10ACD0002E5B957CE9EBE887425E6F4D08D1FE9CC8
-:10ACE000CCFBBAD73C385FBD3ED524E89463C8039B
-:10ACF000B3A1F703FCA22AC2DEDBF3D4534FA53184
-:10AD00007E847024DF878CDE2F8ECB0B51619CC735
-:10AD100047724771FBB87C7537A40781BFB77CA128
-:10AD20000EDAFFA3827ECDD9DF4EC7FAD5BA879E51
-:10AD300047B24B4FAC00FC391C16668D92BF924F48
-:10AD400062F57BA373E445FD770BC861FD22F10535
-:10AD50008BC8EFDA7C748A0DEF07DDECF0F6A0DD2E
-:10AD6000B5D991E2A5F8BB03E445543CCAE178812A
-:10AD7000F8D0E1E1713A07CA5D8C47E1FC0B71FC48
-:10AD80002FD0FC65BD26217F1C9E30ED93DA3DDB84
-:10AD9000A89E4DF3D3F9385B0AA3BC059B9BDF2B20
-:10ADA0001A976762B641E4F0C6A9DCFFDB5CE8ED08
-:10ADB000A9A2F169786C8A6D4EF7A6931E443CC334
-:10ADC000F7C79CA509D1F87956C88396237C7EFEE7
-:10ADD0008D19EEEA62F467FD7B511E6C76ACB4E12E
-:10ADE0007D5DAAB3E4A2ED1C12F48AB4B33DAD3A82
-:10ADF00099DA7916F95F757ADDD88E59DC8F3A4089
-:10AE00008F89717CD3381A6090F274082F4498B0FF
-:10AE1000812EB14F07C6C39207FB8ECBC55CE1B74D
-:10AE2000805CFC138EBFAEF09D17F81AE3FE4AD289
-:10AE3000153C0FE80C7036DE4B159B67116BBF4855
-:10AE4000BD23F510B4A3623B0FA3FD3226B28E647E
-:10AE50001C27B3D6CFD74B8A9FF805EC191DD78B8B
-:10AE60002AF2F806E8810A8E3FC555A6A3BEA83E81
-:10AE7000DF9B89DF1D729ECAE4F6AB717FF9F83F54
-:10AE80009EB063F967B55517B553E47EF250FBC821
-:10AE9000AEEF7EB821DA4E196A5FF9ABF6938FBA3E
-:10AEA0002C14B7DBA918CFBF0FABE0F22F49CC6F42
-:10AEB000D79480BD2215EBF93DFC40338FCBBC32DB
-:10AEC0003DE0A8C0385ABB850591EFFE519A1E8817
-:10AED0006AE752F12CE3EFC3851D35DCF18482EB88
-:10AEE00074786D48C1F879666DA7E2BB48BDFF1262
-:10AEF000EB59D6378BF667687D2AEAAB196EAE1729
-:10AF000033CF69AC204AEEF44EE5769459D8EDAED5
-:10AF1000A34FDAB1BDA3267F7B3EEA0797497F3C6A
-:10AF20006ABD9B6FF6DAAAA2E6D782FB4283D0D134
-:10AF30005721F56098F4B7D4B766A9275234839E99
-:10AF4000A88FE77C2CED9DFA72EE07D5C7737FFCC6
-:10AF5000C5F4C014C4F327E51FCE1FA5E339D8B04C
-:10AF60003925F7ABF747FAED1B536885F46390FF7B
-:10AF70003BCD7A572FD9592E3A3F21EDAAA29F29CE
-:10AF8000A3B09E47F191FD37096F1A5171AB96DB63
-:10AF90008360675D5991CAAFE48FE6031673AFE033
-:10AFA00050F3F4E27DA6A9180FECA178ED7DE795AA
-:10AFB00041CF41DC5721EDA5FEFD4143DC3553E88F
-:10AFC000BD4C51AE63DC3517F7BB8C71D1E26E23FB
-:10AFD0003CA9C7084F3E1113670DFAFE03CFF96174
-:10AFE0003E0136BA03D61FCA8F55621F342B18AAEA
-:10AFF000C4F3E1D9AC93F61B336B930CF89EAE8A85
-:10B000003C0CBCDE588E137E32B5791FE0F79BFAFC
-:10B01000E7156486BCFEEA55DFC6AB30D9367EBE86
-:10B02000CF069D23BED65CB17016D27B40FCB6C164
-:10B0300018B7CD8C2E073CACDE613C27E8F71591A4
-:10B040007FB0E85BC6F382321F1DE79BE91DD8FF86
-:10B0500057F70BFF9206F62FDB7D18E412C95D71DE
-:10B060008F703616613B5A58C17DEFE10D8CEE139F
-:10B07000CEBC8DF906DB3F3820F0158B67169C415E
-:10B08000F89B29DE0D77F03CD5E1B799C84E1C0E30
-:10B09000F282FECEC03AF03500CE5CA7939D797562
-:10B0A000AD89A1DE60E79B0CDFC37029BE2AE9FEF3
-:10B0B000B083E7E166D7B19009E7D37019AD331AD1
-:10B0C000D7C8083F00BE0CF7095C5D663CA79B1D16
-:10B0D000733E57F24166CCFB6B2ADC867501FAEFB2
-:10B0E0004005C90FAE1747A35E84217D3CE5C4131C
-:10B0F000986F377D13E3F7D924C6F1FB6C22FB135D
-:10B10000EA05E0D7A3B6990568C76C75C799300FF3
-:10B11000E25062EF4F5822F88D152C589D85F71C90
-:10B12000F68D53007EBDA27E67FB3428B7F73D8DB8
-:10B13000C16587E3DB37CCC98EC02ED73D04B3325F
-:10B14000A6E37D4098738AEB2ECE7DE51EBCE73AE0
-:10B15000AED041C1CA3866BC77A7B55CBF17F3480B
-:10B160005A479BC4F9E8A87298C78C696E99FF4644
-:10B17000F9786C0ECF0B886E1FF3B2876CFF4A68AC
-:10B18000BFE46BB46FE3E34FC357A07FD270FC18EA
-:10B1900017C7F691BE18448AEE5FB4A7B1E02EDC63
-:10B1A000CF81FE1C0AEFCF8D792A69CC9897D0DF2A
-:10B1B0009F1BFA1BFFFF603E8B07D2C37C317A2CAA
-:10B1C000FD7AF46835F968BCC1090EF28FF0FE2AE9
-:10B1D000BCA7CE2EFAB38BFBBA10AFADA511BC82C3
-:10B1E0007D48ED42F5E60B02CF987798E6B6109EC3
-:10B1F00087C2DB5137CF93BADB1D176ACEFDFF4004
-:10B20000AF744EAFE8FED0CEBCE4FE96427F2997E5
-:10B21000DE1FE217D74F3F7E81269BD22E1DBF3007
-:10B22000AAE0A5E0F728B46B8AC26B241F69BB1B98
-:10B23000FD05BBD96FC3FCCCB9D312697C85290B42
-:10B240006D949F90BA90F28DDB0A1DF4F705DAF247
-:10B25000BE653347E9E9B6C21A2A87FA94475518FA
-:10B260008EC3F0051BCF7A283E707745753AFA8B6E
-:10B27000C1069E9725F394A43E64623F94E6051FA1
-:10B28000264C3BD07714EADFDD504279680989FF0C
-:10B290004DF9575B6B3D1E2CFF899DEF6BFE48EC13
-:10B2A0006B21A3527C6D42F9A3B8BFEB1DDDA8D082
-:10B2B0007EE6BA8BEF677A3FEDA9C23C2EB682E7F5
-:10B2C00069A5D76831FAD0B86EB7225E793E554885
-:10B2D000E1F835B4B7695A2AE1EDEEBCDD0CFFDECA
-:10B2E000D033D0966A5C5F26CC6B8A5D8F9AC54757
-:10B2F000F78BB146138D2313530540C579C7CF4D46
-:10B300005F01EFB36ED2E81EDF618577517E13587F
-:10B31000FF646F1416BE5C85F08079AE32CE237662
-:10B320005EB1E396F71B4B7A793FF5C4A3DFE51DC9
-:10B33000BD90F2CFE847AE7735663E6027DB534CD1
-:10B34000740F5C5C5ED4BC98A19EF0EBFE67E106D6
-:10B35000D055B48E62F7C9FE0F3F2F64651E9B85E2
-:10B36000BE93E76BF8FEDB705C3B48F71CC6F3C08E
-:10B3700063BF2FE5DFB374BE1F678D63363C5FA3E9
-:10B38000AC8DA3B8A6D50A309EBF11F78C3D2CE238
-:10B3900070CD0AD332BCD1FD85298F5EB55D95870E
-:10B3A000FEC451DB22379D6B13FE9539D14F798C4A
-:10B3B000AC20C9E0A71E15E7D31A6FCE1D8671BD5C
-:10B3C0000428EB417F5BF3D890DE329EE21AD57BF6
-:10B3D0003DEAF1DF3EF7C90D36D4DBE81C9733D6E2
-:10B3E0003DEDC39D78BFB05C9FD673FC9E8E7E58AA
-:10B3F0006BA03C11EBB91CC3FBB0F0CFFAFD961467
-:10B40000AD9AEE9F127E432573B7E27795801CC3F9
-:10B41000BD00E2DE8F81ED6719DE87C1EF8EDE278A
-:10B4200018BAFD78C3FD0256F083066F3F3FA67D34
-:10B43000F7A0ED47DA4D36B4DBA671B9114C890B94
-:10B440000D16F7FB725AD57BB8A487CA63FB629AC4
-:10B45000C8BFB78144C37D29C13F5BD21B28AF4D14
-:10B460008DE3FBA8661023C84FC79CB53C1F23CBB8
-:10B4700098D726EF1569C3FB42A0BCCA61B4D72B8D
-:10B4800059DFB1890AFAAF467B7D3A4A52DCAF6296
-:10B49000B1767C03ED9B9AB38C72A143AC1793B346
-:10B4A000A487F2E0521D94E73054DCE1CD2646F942
-:10B4B00059E6787F03EABCB4E9DA88B632801338FB
-:10B4C0009FE54DCF588E71DE37053FB7811CA0F345
-:10B4D000A38DC376A951EDD658C2A351AFD498F825
-:10B4E000B900FA81FEDF4C1D4EF1D7D87EE5BD31A3
-:10B4F000125ED6A04CCB8B9ADF9B627DF4F7776B04
-:10B50000E62EB46BFBFBB38627517FFD7946A2BFC5
-:10B51000B46FD6DF5FC4FA96FD2DFBB6717ECB2CDF
-:10B520003D34BF65E2BE52D9DF5F707EB9DFA03F18
-:10B53000911FD6DFDF778CF35B66EDA1F92DEBF77A
-:10B540002F457F69DFAC3F99FF60B536D4223F0DB0
-:10B55000950721F31F2677641AF21F5830736E6522
-:10B560001E630F289C2F561D1AFD53E48BB3731BCB
-:10B570003D64A7087F8FCE0BA9745E88F4E8D55987
-:10B58000DC0E91EDEF692A63BE313C4E84CF820A16
-:10B5900085CE238C2D537CB8EFB603E407DE7FB74E
-:10B5A00013D63996879AD2E9B9BB49A7E763E05F1A
-:10B5B000FA282EE621F887D379DCE5810CF792553D
-:10B5C000687F54C6F17CEC8AA960D946FC37582FB5
-:10B5D00047ED98F7782D2BC27368F91D1C9F29D56C
-:10B5E0006974DF7D5CD1F19E2680B794A93AE69913
-:10B5F0006FD1078FF36C9BCEE3BF5B441E6510CF0A
-:10B60000499252017F12E6BF5C908AA973E9FCCD92
-:10B61000D5DF4924FBA6E65BBD4E378CE306A5E8E3
-:10B620003FF2001F7F15F6CDF29C2B491EC4FAA7EE
-:10B6300029A8A94A30BF500D85E0D745CE45E4DFA3
-:10B640002EBA86B124F8FE6AFC0EF4D4ABC23E7A60
-:10B65000A5D7CAD0FF0B56F3FDEC1BEE32FAA50FAF
-:10B66000D8C36EB40B1F284A61488F9ADB8CE55B08
-:10B670002C7CBD2D8AF153AF8EC90392F71F6EC18A
-:10B680005FA7003EA78B7B5F441ED055D375AEAF3E
-:10B69000B39228E95B9ECFB45AD9A0FB94B2BDBD4A
-:10B6A00028B750CEA6F8080F326F8EA97B8BF07B9F
-:10B6B000D99FFCEE61656FC6C5E2A960079EEC2DBF
-:10B6C000E0FA1EEDF5DDD38DF94A67E78EFC7E3595
-:10B6D0001B8C6FFB348C53C8F1FF6FF16BCD743E44
-:10B6E000DF57677E56C2CFDD65B1E8F376321F6C57
-:10B6F000513FACD17DC2321F90A5F71522BDFF7D11
-:10B700005ABCE71EE23F618F84DF305D88FFFAEDAF
-:10B71000F58F23DD976D38BF2ADA1B0ACF43DD375B
-:10B72000413F51F9922DCD9E743A5F97CAF7DF865B
-:10B73000A7547D80E7B9B0FC1D037F19CF6DB51C00
-:10B74000795241BFE52778DECD1CE917E3C36D0EC2
-:10B750006C37C4E34AE127292E9C551B565A0B230C
-:10B76000E78362E562D63AE3F9B3D87B14E7397A26
-:10B770003545C77D803E3AD7983343ECDB208EB108
-:10B780005E2AB727D54C13CF1F19A173FB32AF2FF9
-:10B79000277A1F449DC1ED8679F1AFDFA683E8FDCE
-:10B7A000C7A1BB96639ED4BC84D76FCB05F8FCA120
-:10B7B000EF2DC73CAA7999AF7F960BF2F6CB43FFEA
-:10B7C00087978F7BFDB39168231E6EE2E5531921A5
-:10B7D000C97438B89CF68766C87B137BE8BC762AA8
-:10B7E0001EAC98F4CD9FAAD534E8BA74CC90714BB6
-:10B7F00046E7B3FD077F7702E5945FC6797DC67D96
-:10B800004F26EE4DBC4AB2578A8BECA52BF177C080
-:10B81000E755E2BE1D932D4C781D13B9CFE4A1AFBF
-:10B8200073DF4EE47C3CBF3FA865230B18EF45F463
-:10B8300009FEE77944723CB2FF01E3C27B0193A2A7
-:10B84000C7B583DA91E3FAA4C81A542646F671E51F
-:10B85000B83E51FA7662D0A3EED82F5720DD3E7164
-:10B86000F6E5E0DF37393EE31DA2E327A97D3B156E
-:10B870004F146CE674F41EDE4EF6544586CF3B231F
-:10B8800015EF0FE0F716B40B3B726B6A20887E3D14
-:10B89000F01BE57106B3F9B986EA12E3DF61AB107C
-:10B8A000FCF59B197CFF7896755BC36B25788FBA86
-:10B8B000C29AA17EFDF9B316F4FBE71DE47FA775DC
-:10B8C000FD81B72DF47719108676D6EFB00CFA7794
-:10B8D000E00ECF5025DD0DFECAF3D9F96D29309E5B
-:10B8E000F5ABF8FDD88DBF4E9C8570E30A9C25FE14
-:10B8F0003DBD7DB3F0B365FE236DF85CCE7A9FC786
-:10B90000737F4B02463FE2FA5AA3DDBFACC168AF7A
-:10B910002FDF06D401BDB67C6366CC3D7EFC7EC0C5
-:10B9200025829E4BD2EFEDC17B0796B098FB018339
-:10B930003C8E743D9F013C8DF19179F8F7A4701E07
-:10B94000EB548AF33E9FBD59C3F370F50DFC5EB214
-:10B95000595D9F5AA81CEAE17E53DA707E0F9E94CF
-:10B960009F52BF5FFFDC2E33C60B62EF095CBE78CF
-:10B970000EDD07BE585FCBF5FB883FCE4A82F7B19C
-:10B98000F7FFD57471FD5EB35109E17DBBD7D71ABE
-:10B99000FD8165ACA70DFD99650DC6F7CB371AE1A2
-:10B9A000EFCD107A6D1C1B87EB63D30C45A373D5C9
-:10B9B000023E9DFDC757C2D07F5586BF6D06F0C9B8
-:10B9C0003A4B7802EAB9AA8C00C1B21CDEAFE77A22
-:10B9D00088EB7F13AC2492BF661EB708D6F17BD9E3
-:10B9E000AE1F600F44D90BEA40B84BCA4FBBFF36BD
-:10B9F000F2C39E53E8EF82576B3E2D29CA4F8EE566
-:10BA0000C35F0BBE7E85F516E2B8F291E9802EF990
-:10BA10008BF8DF7DCE3FBC82F22CF38B158F89D65D
-:10BA2000B1896DC4FBC4405EA05C40FB13EFC9C884
-:10BA3000573B17939C9E6871F3FB76D259F4FAF743
-:10BA40003DC914C4170E1DFBBD2AAB9BEEDB98DF6E
-:10BA500071EFA728E7F246F9BC0FC0F8B68AFBB42D
-:10BA6000B7FE5A217B767DE10B240F87015B60BF17
-:10BA7000EBD3855CEC32DE83310CE5141E68995BF8
-:10BA800048FD66C8FD0799E71BAEA27BA586897EA7
-:10BA90007F3F4BA779A7ADED5470DED92CD88C71C0
-:10BAA000A83D280B53234FB94F704D64FFBC02E9EA
-:10BAB0005997DE4BF7C2C8FDF341EACD46B933A032
-:10BAC0009E8F19F28066A9E75DB8BFDDF8DCA88B10
-:10BAD000E675A836E3FD9066B7F17EC8AB0A8CEB3D
-:10BAE0007B9EC7B8AEAF2E1B65285FE01B67285F43
-:10BAF00034A7D8005FE39F6AA87FDDE299C6384289
-:10BB0000BAF17E48BB6EBC1F32BEC0783FA4D3637F
-:10BB1000BC1F92A574525E9AC516EC0DE878BF0062
-:10BB2000BF8756CAE9712E1B5D2A17576C77E0B3A1
-:10BB3000BDC81A46BAB50FE7FBB9D6176F4F0F232A
-:10BB4000D613F6DA2AE1F9B412AAC2FD289BF01B3B
-:10BB50002FBB8B19E4F89533B91C974FE60BC457EC
-:10BB6000625C768F9EC9F3B67B2EBB587EC5A53E20
-:10BB7000FF2FC2784B6B0080000000001F8B080075
-:10BB800000000000000BED5A7D505457963FB7FB64
-:10BB900075D30D880D281F41F4A1A0262069418C82
-:10BBA0004E6636AFBB81693F3269FC986010D3ECBA
-:10BBB000E816138126D14C91AADDA255863466FE83
-:10BBC00048AC4CC6A452B5AD153399A9711713569C
-:10BBD000DB4DEB362AAEC99AB1DD31194D2A2974F5
-:10BBE000DD4CAC8C0A31E3985D77DD73EE7D8FEE32
-:10BBF000D73C12B23595AA9D5A28EA72DFBB9FE75F
-:10BC0000FBFCCEB3A503C022FC3B680BEF2B01B8B5
-:10BC100097E1FF4B01EED0CF0300A7EB5C16A50622
-:10BC2000A0E2AF9565300DDF45C05186E3F65A417D
-:10BC3000A17EF0A095CFAB880C9B94CCC4BCE7143C
-:10BC40005C683AC04F7DEE65B47E47943900C77595
-:10BC5000ECBE64952BA83F98A5605BE9BB6485CCDE
-:10BC6000E4E717ADF4BC431A497760FBF7FD666F54
-:10BC7000B822B1AED6BA142B5FFF6431B6788EE627
-:10BC800027CDE1343A3B282B5D8B011AE95F199FE0
-:10BC90001F18899971FFE676E60CE2A346F9B19583
-:10BCA0009085FFF82D97866D0036FCBD331BCF596C
-:10BCB00098B517EEE5F301F2001E05F1F3C892986E
-:10BCC000054C004DAD623CFDDCC1BF47D7D45F6180
-:10BCD00095B86E67CAF319BDA3E62C9A2F5D1A9E1C
-:10BCE000AF3E27BA2A53A67D5C8E9D72A8B8330753
-:10BCF000E0BCCF6478AF873C12BFD779BF87D3FB56
-:10BD0000A7483733233AA6D249D0EFABE8B31FCFC9
-:10BD10009ECCA7D4716B3C824FFB1934F6678E7FA3
-:10BD2000FF33958F7B59BC0ACC00011F0ACC54A469
-:10BD300087AD65F3E56AA2FFCD5E46F4FF070669AD
-:10BD4000B8FE07836FE5C95300AC0786F28671BD64
-:10BD500040FF501E2C0068B3C8DBA4695C0E9CDB5E
-:10BD6000902F1D91183F7F7B7FF5203D6F8F30A76F
-:10BD70001D8F1A1818ADE7F784E15E4726ED6B7C3E
-:10BD8000AE66C5C4CFD5AAC8BC0DF871CF69343F23
-:10BD90002D1C66C4F7612B978BC30C9EC5FEDE3E3F
-:10BDA0005B63D8609D75446F94EF137D5690504E41
-:10BDB000DA703EDDE364F149AB8DE4E600DE8BD161
-:10BDC0003DCEAECDA0F5B75A406689F35D2D8E7F8E
-:10BDD00044F7BFB0D102417CBE63A399D3FBC256E6
-:10BDE000335FC7BCE9DF7B8BB0BF0EE52F0D8F7AC9
-:10BDF0007CE38D9345B8EE8556ECE37D3D9B2C5C52
-:10BE0000FFD63DCEF8F854F9D5E4F525553ED7F9DF
-:10BE1000F5F2962AAFE3E4B4F5EBC9690FC96906F8
-:10BE200097D3CA3B66CEF7BA7C929FA7C0B98FF46E
-:10BE3000E7F6714B3E9E7776AFC3B91DFB0BCCE1A5
-:10BE40001FE7915D382EDE2F6CDBC3485FF0F08F6B
-:10BE5000D0BD8A4256D8C9488E04BF7EA6F24B8612
-:10BE6000119641FA2AC567FB503E706B85F8FCBA03
-:10BE7000051A0F54D073615F161C2AD8B333496E6C
-:10BE8000EB5579B499C0DF8FE3CAADE03F9049E349
-:10BE9000FBEF6AC075F6E37C7A3E535DAF6CCE482B
-:10BEA0007D03B687687FE4F31EF51C5AFF0724FF65
-:10BEB000D8C2CB260648F7076D82EECBBB62EBE912
-:10BEC0001E8B66F87F4EF66FE5CCF7DA00ED44681E
-:10BED000F6DB157E3A1F384D44F7804AF7E34B7F77
-:10BEE000F7F216BCAFFDEE74CED786632FC689CFAE
-:10BEF0001DA51210DFED658BF2FD06F2A7B5815B83
-:10BF000025E0CF4DF43BA2A3F58A815E6F50F57515
-:10BF10008155DC1FA248A4426E8FA525558971DA90
-:10BF2000FD01B6F3FBD9CB5EE17CDAF2382C34F3B9
-:10BF3000133FC7D7696A3BCB5A709D872D8A25135B
-:10BF4000E9FCDED4C6CD97CB00DEEE461389173967
-:10BF5000DD6D03FF3C805F773B783FDE5DC0FBFF1C
-:10BF6000DA2DF376DE4CDFDB0AAEB3F6446719D187
-:10BF7000EB78F10B3E37EE73FDB485D301C0CDE90C
-:10BF8000B44595BD1B5133D8F0FD8D01160696388A
-:10BF9000FF865B45E0477BF23EED8713DBBB7EC34C
-:10BFA000ED9CB375B45ECE24B9BAD84BFD40D71F13
-:10BFB000EA01DB8FD04F907C05220C0A709DF5B70B
-:10BFC00072F9FCF6C859AB4C72601AA927FA078FB0
-:10BFD0003220B90C748E72FBF932DE4BC173A7BBF1
-:10BFE000B2395D02D18526C1CF4526E2FF132AFF73
-:10BFF00007EFF98F2CB25FB62EF9CCFDC4C753669C
-:10C00000CEC79DEE912C87015FCEE3BA9026CE4F2E
-:10C010006DEAFB466BB0CC89F31A55B94D7D6F754F
-:10C0200009B9440A5B7C5304AD18D26DBD2A5FCDBB
-:10C030007895A939D88FB0583AEA6D73D47345A270
-:10C04000B693C1259D3D00B8A4E9B37962799B6C94
-:10C05000DB41EB9525D94B3F2E3A3FB15F536B0641
-:10C0600039D1A4FD83FC1E69C5A5F97E837B8EC9E9
-:10C07000FB7011C8C8AF8E100319E5BEFD56396FAD
-:10C08000AF1D7E5A263DB1A58FBC407E01E69A1CAD
-:10C09000FB90BFED415092FDDCA85BE8EDA85BE8AA
-:10C0A000F14C17933EB671BB554EF77617FA4B5CC1
-:10C0B000788EDF17BF97750C1FB759639560FCBC6E
-:10C0C00003D01FDB489F70DF72E4CFEB06E7BEE9C9
-:10C0D00076CFA57933E1592EDF80F24D72957ACF74
-:10C0E000852E712E4D9FD71DBB621D26B98D18EB75
-:10C0F00033F3B816D2BA7D005E233FF747F59EEDC5
-:10C10000BB19A75760772EA7D355D8ED73A35C5EF4
-:10C11000C573EC45B9BCEEF36564E3FCEB7E5F46AA
-:10C120004E6642FF3B7667F0797DA5AB725BB05FF0
-:10C130004F728FFB5D8B786C44E70DBB85DE69FB2E
-:10C140007D145B974BFA536319B13AF1FD8CE8C546
-:10C150002C8AEB6A0EAFCE25FD9BE89C8BDDC22EB0
-:10C16000B5776DD97C3957C88319F569B3EAC70229
-:10C17000DB6356A2FFE62EE0F23B78F0830ED2DFBF
-:10C180006BD10C07F9BDAB47328264EFAF1F4D0B8B
-:10C19000A32586369277B467572DC3DFE3F1E361B9
-:10C1A000B32388E302473F7D81F4317010B511D786
-:10C1B000DD1C7D7A94FC5B5B74D91589DA5F7DB3F5
-:10C1C000FAD0DEF5237E5FADFF69B74D26FB794DD2
-:10C1D00012766273E40D1ECF6EBE7DA3D25741F777
-:10C1E000FCCFC564CF02FF746331D9B1C09B371651
-:10C1F000D3FBC0A18C4EA3F8A4D563E6FCD7FC63A7
-:10C20000C93949491E97ADFAAF929E67BDB3917E79
-:10C210003567D738CD72E27D4D99C947E36BDEAD06
-:10C22000CDDD9434AF272E79E9F9A2B3B5191B936C
-:10C23000E4D2EAB1A87608B51AEDCF3A9586EB0AB2
-:10C240007E123757525F0AAA7104BBC3E36D902573
-:10C25000E47313FD87AAD81797783C136C3587CB06
-:10C26000F07D53DCA4D82BE93DCE4B8A33007C2BE8
-:10C270001610BF7F38DDB953E6FE1EBAA9FF545928
-:10C2800098FC3D046D43A54971D0BAB829968672D1
-:10C29000D3184D8B513CB42E2E5DE47D353EFAC84B
-:10C2A000F1FA8F67038F8F2E27C739180F5DD6C716
-:10C2B0004B3085CEABC54BEF515C85F16CF3D69816
-:10C2C00085FC15C649BAF18F367EF70AA338A94B0B
-:10C2D000FFBC242E991EC47B96A0B92332F4C59FBF
-:10C2E000B7917E687126F16BC040DF2B553DD1F4CC
-:10C2F000A8276EE27CE889BB6DA5D8CE53DF0F3846
-:10C300004C10C4F57BA2ABF7318ACB6E3F9C41F455
-:10C31000EA39B70AB693BE3BDCB6329A77FBBBB6B6
-:10C32000B51509F918673F5CAA7D1C8B078CFDDCED
-:10C33000272E35AEFA86FCDDE53F177FA7F83F25AF
-:10C34000FB5DF19ADC44F121DEE71E8A6753FD8430
-:10C35000667FB5758B543E8FB7BF5778FC82F92F37
-:10C36000B7BF456E998F9B116DC8E579F1B935B9A5
-:10C3700072E6F8F5E7484E534EC5F8F5B5782D103E
-:10C3800054866C94C72866AE9F81352CCCA8EF6389
-:10C390003CCE0EACB784E9BD769EF81AC6C7AD7523
-:10C3A000B2B09D25E23F2D3E1C7BBF08DF9724E203
-:10C3B000452D2E8CFB18CF83D62816FE7EDE4C7FB3
-:10C3C0008EBB86EE67E7CF6B968A75D10E0C517ED9
-:10C3D000F4F0F719703BA0C68B9A7CA6C6939F45D4
-:10C3E000E74C852F892B5E56E552D3AF99297AA168
-:10C3F000F9A97AD54F77909FAE263FFD8595F460D9
-:10C40000A2B81BFDF45C379F077CFEA277259F51E5
-:10C41000DE7D585D77B1C6B7F809179DB718E2DB26
-:10C42000285F9CC87FE6794C3ABB90FABE7E927A30
-:10C43000DCA2C60BDF941E37ABF1D7FF753D1E8B18
-:10C44000FFACC6F7BCE976FD15C96FBAB933EE2269
-:10C45000BDFB17D43B79FCB8222D9F9440C79FA108
-:10C4600062AB89F29E40ABC00142D9F2199E9FBCDB
-:10C4700065065A67F3AD421EA73D762B9BB7A142D6
-:10C48000107EF4C9128EDB3CF6DA598B82F39BB630
-:10C49000B285840735B5EAEF139AAE709C2D788487
-:10C4A000F1783954D87F92F42AB86F8E4CEB37D399
-:10C4B00065090F69CD0EEF20FC82709C7BE9797ACB
-:10C4C000820EB84FBBFAFC7E15DF819438E0CDC1F7
-:10C4D0000B1CEF090C3020FDB546D17E903D39256F
-:10C4E000F08E8EA8B00B9F74D9B93DF94412F708AD
-:10C4F00074B1F036968823AE449FCB233D1B174F73
-:10C5000028184FE425E289F657DEE5F630357EC877
-:10C510001910FB04DACC61C263868A1733EAB76369
-:10C520003E984F71A22C3F5424CE05616E57141DC6
-:10C530004EB2F72EE1F73F3BF56F3C8F6C3ACC20C3
-:10C5400097C71D4ABC342F11773C1A5ACEFDBF162F
-:10C55000673C3AEBE45011ADA7C6190EFC25FC3040
-:10C5600035CEE8889CB5505E302E9E4889235E7794
-:10C57000EB71C15992C05967459983F0A4592A3D7E
-:10C58000EFEB4BE77171FD871B7349CF35FE5C6B99
-:10C5900010FCBA76E17317CD5BFCA1E4207BFBE6CF
-:10C5A00085ADBF29127DD926D3BCAD1994875CFB1C
-:10C5B000F0890CA2E79BD802EAEBA1F392217E2836
-:10C5C000ABF608FDDB3FBB39FE2B17715C4742FF22
-:10C5D000362581BFA4CE7BC023EC4108D30C8E3B13
-:10C5E0001E062EBFA142FF72DE7F7136ECE3B88FCC
-:10C5F00090D737A2D90E8AF7CAF1B25D6827FE2E0E
-:10C600001D7AEC5524CFFEB7B97EBC68E2F28BF3FD
-:10C61000838CFA0764EEEF8864EB717CA515CF522A
-:10C62000056233D4B77B54BE15621E4AF9209E665C
-:10C63000CD1DA453F98C535F101F2BD341A2F59F3E
-:10C64000B1F877DE8D539E19949CDB688EE4CC6D37
-:10C65000C07B3D63174B3D7318E515CF85D2CDCF19
-:10C66000D55171F23CCD67B203D6E3FC8E82CC1873
-:10C67000E16710B1FC7E4C2E510E18ED5329E4ED0C
-:10C68000E3F9141B2AEC0E9A9AB7EB646117BEEF1C
-:10C6900003CA83762CE904CA3B4FD6811A07D98294
-:10C6A0009771FC5A9C31159F4F2FF417525CD15E45
-:10C6B000306C1571C58895E28AB92E6DBCC0ED4C01
-:10C6C000389EECE5CEF9AF73796BA2E749FA0CC955
-:10C6D000F89E797CBFC53DD1FEB2C8E752F65F94A3
-:10C6E000FD591ECF5FFEEB8F59DC9F456F70BF7306
-:10C6F0007D240DE21CB71B163875D4C2F3F5EB98F8
-:10C70000074D4FF2673B5C820EC7A21E2E8F03F1CE
-:10C71000DA0C1AFF4B97D8AFEFDC9AD50F929CC476
-:10C720002567193FA5C86B06E2528D880FC6D1A9AF
-:10C73000CA6D704E5BBAB0E7A9F279C92DE4FA125E
-:10C74000DD1BCFE1B920F295C056513F70A8FA1613
-:10C75000E864DCAE9C2CCE631A8E9C6F545F383C30
-:10C76000C2ED6CF30F9933284F5C5FD8A5E619A989
-:10C7700076A8237240F02D15B7F5D673BB3359DC7C
-:10C7800016281B5E9CB0D3DFF1A8766581C0714F7F
-:10C79000B81DFCBE399D0B5DF990B8BF013DF77B1C
-:10C7A0006AC6D3D3605CB4D680EE06E3FEF0C0E484
-:10C7B000D6AB5626B79E6B92E35A94C9ED7B68922E
-:10C7C000EBED99E47A4F1AE92DB25DC4030E2137DF
-:10C7D00075E6DB5924FF4F1C9993FF65F1AC190DE9
-:10C7E000AD9CC47F8B231DE424BFBF627EAEAEFF31
-:10C7F000A0B34837FEA1257374EF1B9472DDFBD5FF
-:10C80000DE6A5D7FADEF7EDDF8871B3DBA7E5AC1E3
-:10C8100072DD78BBBC4AD7CF98FF886E7C087566FE
-:10C8200009DACF346B6688A1FC4F71FEA56E7C7A65
-:10C83000B53D93F422B4302D46F29EF6D6A620BD27
-:10C840007B9AFD642446D4CD3AD8C85065A5EC57F0
-:10C850006CA4272B978ABA405FAD2DBC87E29CBBA6
-:10C86000B22A69BE46AF7D7522FE72548C06739162
-:10C87000CE3395786D2EEAF3F5A5C0F387EB7651AC
-:10C880001F00C951D8C0F9E7285C85763F6437AEF0
-:10C890003335D6A979F104F6E4749DEB17A42F0E75
-:10C8A0008ACB0DF8A8A878BD23021CB701492E5CDD
-:10C8B000C5F7950BC9DF4C3D219E67C540D9C3CF55
-:10C8C0002597ACE271B45C42E7DBA5D6BF7296CF88
-:10C8D0002D21BC2E07FD2ED5479EA33A09CF031C60
-:10C8E0007C9CB69FB356ECB7CB028CEA59C1BB19FE
-:10C8F0008F53C1315557DF386D895D6E61BCBE7194
-:10C9000082CEFF8E2956B1B744F085E85B31E0E076
-:10C9100075975F2FFDF97C3FDF47D43BB638C49055
-:10C92000E3946FE039B61CA9E6F2DB746CE96FD7CB
-:10C93000535C582A713A8F8BC7D53CEBBC9A276A57
-:10C9400079D630E58B4979C7798F6922BB74DE636C
-:10C95000A057BB98C88383EF883CB8DAEA9CD39988
-:10C96000C4A7CB6A3CDE121378AC96DF562A61531B
-:10C970001ED2A1FA29732C0DFD7575EF022BD9ED8E
-:10C98000EADEE2748E2F6D3C60D2E86DC4F76BEA8C
-:10C9900039FB4E8DF0FAC41B29754A67AD95BFFF70
-:10C9A0005B551E9DB5C0DB2D65D20E72C353BFED26
-:10C9B000301BE1E3CD18FFD3F95A42E2BC5A3DA443
-:10C9C00039267B689F8B4323BDD456B59678387E35
-:10C9D000D836DA4BFE3370FBC6C907381E6095297E
-:10C9E000BE4A5DF7509D99CBC51B149010BD96496A
-:10C9F000611A57BD4CE2FCCE69B6F37C3CC702E637
-:10CA00004CEA37087F56E59DE6A13EACC9E6FEB884
-:10CA1000EA949CBDA92291EFE72CDB3A9DE8F455FE
-:10CA200075220D37983753994A7EE3EBD689DA4F52
-:10CA30009FB3D2BD370CEBEB445ADD67A23A915657
-:10CA4000A70D783FD7D59503D2483DE12BD5472E8A
-:10CA5000F23A7120C21C052589FA516060D4CAE9F6
-:10CA6000ABD68D70BC95E60D748BFAD141DC9FDAA4
-:10CA700008DE57C173FC23DE97DA28DE979E1FED90
-:10CA80009ECFDB58B793B7C7BA97F0B61AC5A63092
-:10CA900087EA4EA3BCEE5453ABAF5B68750977A130
-:10CAA0006F496D8DAE6EC1FBA9750B73BAC8470394
-:10CAB000A72CCEBDF83C70DAC6EDAC2BDA328BE297
-:10CAC000B29B67FDB31CBC0E90CBF3CA31F9559CE9
-:10CAD000F66CCA077C4E3BD50BAA07AF58656E773C
-:10CAE00062455040F853DC4A793FD141E1F19CCB9B
-:10CAF0004E74FD4A7C3FF2FFF8FED7C1F7A37502E2
-:10CB0000DFD7EC4795CFA4ECA1F69462DF94641FC5
-:10CB1000FA7C0227EE2B9DCDF5EF79DFECEC8DC989
-:10CB200078BE57E47139CB4AEDC9CF59BD45C47DB4
-:10CB30000C7C4676ACB776427BDB6B1CDF19D705E5
-:10CB4000FABCC28E68B8FFF83A81F3ADD224BCFFBC
-:10CB5000DA3B28A798B70E1E4EE3FEFCE691B4BD63
-:10CB6000147F577937CE9A82FDAAF3695022FC913F
-:10CB7000AEBED0E43529F62CA37A82526442B91DA8
-:10CB80005737F09AB87D1FAB1B78A58BBCAFC6E9B1
-:10CB90001B467F37A58411FDC321CA33DE6867CEEB
-:10CBA00041185F47C0858B6009DEC27B8ED7959D9B
-:10CBB0009DCC29CB5F5D5FC85371868E48B699E4E2
-:10CBC000BCF904402E33AA337879BC5F05CF866A5E
-:10CBD000E97BAC529383FC592A5E407242FE3F15BA
-:10CBE000278CAA7C8CD60A7F53E711FEA64A8D4B70
-:10CBF000B479A9FCCF56FDD344B82353E39F1E6FED
-:10CC0000551FF12FB8D204E4077ABC6E5B69D27A63
-:10CC1000676AC5774BBBA86E312DB96E21EA13A99F
-:10CC2000F50ACD4E550F7E514FFC7F3E2AF0A440B1
-:10CC300081C037AB8FBA4E91DE27CE29EEF73CF29A
-:10CC400038CEE3286736887B814DE05E1C67A85AA2
-:10CC5000F9F9B10CA29F0FFD15D9A5D3A53B32C997
-:10CC60009EAC946A98CCF1EE31FC9BF0A9D5675A42
-:10CC70009703F9FFB50BCF12DDD7AEB7F0EF9034C5
-:10CC80007FB5FA4C63BD78BF677B3ABD9FCF9C767A
-:10CC9000999E7BDDF47CC5AF6284F4C183747BD440
-:10CCA0009BF8E9CB12E9CBBC99FEEBA43FD50D2A4A
-:10CCB0000EBE5EF8D7B5D1060B648EF777C78B6FC3
-:10CCC000F23CFA46B49AE3DBB9547FAD48F88BEAFC
-:10CCD00023E887A6FCE9FC50769DC807EF453F4452
-:10CCE000E7C9691075C254FE9F51E3C989FCCA4463
-:10CCF0007694FC886989D01B5690F0BF32E5D7F74F
-:10CD000025FCB02382FDFC2FC1BD55B9CE9E200E5F
-:10CD100073ABF23BE1F71B916F0607FF8BBA3F8FB6
-:10CD20007A9696E76878B89617BDA8D2596B5F5285
-:10CD3000DB54BC4CC3C9F21580AE2FC1C9F2094700
-:10CD4000CB21B35DC171BB42F50C63B8592CC774DC
-:10CD5000A71CC7A9B89D869FE56DE86714671443B3
-:10CD6000701BD997212BB80E4CA3EFF6186C23FD3E
-:10CD70000E37F03867E8A5F77B7F41DF1B0E3007E1
-:10CD8000B99FF6FEB3DC4FB7635CC3E3A1E8A7022B
-:10CD9000A7EA17DF9BB647986284830EAAFEB956AE
-:10CDA000016E37DAD5EFFAEA07845E2770A21F49D1
-:10CDB000C93851408E4FD7BE170C0BFF64F85D5F2A
-:10CDC000078CF0EF013B5A993386CF5371A354BCC3
-:10CDD000E859F53BC0097123E5EB7DEFB7BD6EEC7B
-:10CDE0007B3F8E3FEFF308BBD0E8678CD6B7997CCA
-:10CDF0006DFCBBDFA3CC61F4FDE86E55EE57A8F8DF
-:10CE0000EDAB56210FAF7E8B85299E5B0102A77D7E
-:10CE1000F5680BC76F5FAD624E13DD53C56B97AB03
-:10CE2000F4B83B81D73E4F78EDF7D09D104EBB4212
-:10CE3000E53F40989FAB61777A8CE28D672CFD05CA
-:10CE4000A48FDAF7465E15474D4F834E23FDECA9BC
-:10CE50007379EB6A68DC84F1CE2B7506F8CE558FBA
-:10CE600058F7977518A7CF07A3387D7FDD745D9CB1
-:10CE7000CEFBA971FA9F0AAFF5D03D8DCFFFDF93AE
-:10CE8000C4ED1EAF9DDCB84D7506F1DF0E153F49B0
-:10CE9000A56F66BD66876738B83C8D9D1F443D57BA
-:10CEA000C5BD86543F1762F26FEFE7F52F0BAF7FDA
-:10CEB0006976263445ACFF816A5FB4F6A6DA862C23
-:10CEC000C6380DAB177EEADB85CAFBC4C7F2D7F4C0
-:10CED000B8D9827E3D6E766F2447D75F18BB4B373B
-:10CEE000BEFAD46CDDFB9AF83DBAF7F79DAFD2F5E8
-:10CEF000970E7F4B37FEFE4FDCBAFE7746F4B8D96B
-:10CF000003B7F4B89926DF2E9488E4791EDB0F74FA
-:10CF1000E38A5AF5F72AEED4DF6B5697FE5EDABA4B
-:10CF20002541FDFDE684F4F7CB215CBFE27F8FEB6A
-:10CF3000FF4DADCCE97F2C3AC74EF376794BED141B
-:10CF4000C74C2F14F2AA8DFB1FAC27E8D970300014
-:10CF500000000000000000001F8B0800000000001F
-:10CF6000000BE3146060F8510FC1D3F9191836F3C0
-:10CF700023F8F4C0C79819188E83302303C33E20CA
-:10CF8000DE0AC46B80F83D0303C352203D078827A7
-:10CF900003711710BF048AD5B1623787858D8181EF
-:10CFA0000D884F02CD3AC54CBCFD8A7C08F6215E47
-:10CFB0000686B5407C9497BE6130D8F00C41FAD912
-:10CFC000F50C6AD76ED181F73708B38A3330304A0F
-:10CFD00020F8FD12A8F26CE20876960C65769501B1
-:10CFE000F50300295128158003000000000000000F
-:10CFF0001F8B080000000000000BED7D09785445F0
-:10D00000B670DDEE7B7B49BA3B9D90952574802000
-:10D010002A4BCB1201113B2189010306440928D276
-:10D020006C2184249D01661E3EFDFF6E0842C4D122
-:10D03000898A1AFC195F83E004079DE0A0139DC054
-:10D04000348B8833E804C70597795F401E2042126D
-:10D05000A338E8F3C9AB73AA6EBAEB763769B7FFAA
-:10D06000F97FFF840F8ABA55F7D4A9B3D5A95375B0
-:10D070004F14924292FA1372097E6E20E455851085
-:10D08000FAA8BBEC903A87CB0383ED6BBD2EE2325E
-:10D0900012F280D784E57A6F3A715D419F8FD61581
-:10D0A000F92D84DCEFB5E3F3C7BD25583EEA2DC565
-:10D0B000F211AF1BFB3DE42DC7F257DE1A2CEFF542
-:10D0C00016617B9D7715D66F5416A4C1B884B84CF1
-:10D0D00059C984785E1E387203ADADCF1C9F208F76
-:10D0E000A6F5BFEA893E8BBE375A2EF20FA50D7208
-:10D0F0004951D6E8603F15CF1B95BCBE00E7F1B1A2
-:10D100003AD6CF54F35A76E47E59640CC573AC8C8E
-:10D11000F8134BC9E4ECE488FD0603BC4786B279FA
-:10D1200012BBF3B54191E15D0DF01E1ACAF14BB689
-:10D130004F1E14199E13FAFDCAC9E1A5771E1E18C9
-:10D14000B9DF18E857E7E4F0FAFA4C03228F3B1EE8
-:10D15000FAC5C0278A1321BE16A33F3BEBFBF38B16
-:10D16000B8E85F8A4FC75EF3D60D12F26F1AD06926
-:10D17000AD7DF9992D749CF696614EBD8390CF5C80
-:10D18000CE04BB2526BEDD02F388816FA5304E0C90
-:10D190007C9B1B23DF1640BF18F8B604FAC5C0B746
-:10D1A000CA18F9F6B39F08DFEE053CBE07DF36C4A8
-:10D1B000A86FBF8A916F1B63E4DBA618F5EDC91851
-:10D1C000F9F65428DFD4E76AB9834868176F544AE0
-:10D1D00076403F4F669B6D40D64F827F7BBEA7DE79
-:10D1E000ED8F917FAFC6C8BF23409F18F8773446B4
-:10D1F000FEBD1323FF3E8851EFDA709DB1C85FB5C5
-:10D200000D21F8736900FC6BB19FBA9AD7F580774E
-:10D21000122119E172A09694A3280F3271B7B37549
-:10D22000ABE09B4B3984AC30D1FFD2F77D7924A0A1
-:10D23000A7E3FB6CC45F2B09FD3F073C09C9FFE670
-:10D2400052AAD0DFA78BD89FE8A0FD61902BCAFF20
-:10D25000CDDE2158D67339DA5CA44379F0251B5012
-:10D26000BE9EF03AB1BDC13B16CBC7B85C6EE4724E
-:10D27000F400C8DD152087A55CAE98DC1152E228C9
-:10D28000A774EDD8134F363850AECC12E02933795D
-:10D29000BB77CF955B3750F89B6B74576E0B91B390
-:10D2A000278A54F9A292991CECF744F909DB82A170
-:10D2B000486F1BC06928D6A9FD7CA1FD1ADCDDFDE5
-:10D2C0007A41BFC78AB97CC924103AEE63A5DDFD57
-:10D2D000D2254A977B2552DA6409E7CB1489E929DC
-:10D2E0005514E487CCE9BB3FEF2C69A3EFDBEC23BB
-:10D2F000D3082D9F04FD44FD7360A9BE5F4FE9EC88
-:10D30000A6F4C834929A26C097B44A0AC5571EEBB1
-:10D310004804397A689C8B485642FA433B1DBFCF7C
-:10D32000E8369245CBC4F16D441A06FD683BADA7C3
-:10D33000F0F68CA1B49DC27908DAADC1F654DE9E38
-:10D34000E6E0EF5FC7DA1FF6121C5FED771FE5B36B
-:10D350009BE2B78EE28BCF8B890BE8285376FA439A
-:10D36000E63F5BD2E3BC2B79A9E27F5FF6A98CF99B
-:10D370004383F89A075FCC981F82DF7D83E7605D67
-:10D38000C5C77C4525D6FBAFEA4D3D31AE0F249C89
-:10D39000CEA9330708ED0ED9897E9AE3889EF82836
-:10D3A000BF1C543C23F1E70B2ACE3FA8FEB9183D21
-:10D3B000B4ED776BE8B02E43A483A1B7488775BD61
-:10D3C000453A18FA5C9E0E532407C28F460F75DC4F
-:10D3D0000D578AE3C65D258EBBE12A71DCB8AB7FB1
-:10D3E0009871D7F713C735668AE3AECF14C735F601
-:10D3F000FF7EE312D9491F3273411CF0CF3CC1BEFE
-:10D400005D20EE8741BFC1CEE99383764EB697107B
-:10D41000B725C84F22D3977342E1DC29D8550AE7D4
-:10D42000FF7038AECBC3B16BE0CCD5C2D9C6E190AA
-:10D43000503B1D0687DCA19DC76FF97B015DC8F8D5
-:10D44000747D2525D6D0F79C9AF16FD78EBF1BEC43
-:10D4500018CC4377D9F11D1ABACED1E2B387C321D4
-:10D46000BACBD183D83570666BE11CE27002D2650D
-:10D47000E1946AE7F1BACA574958BF283D8605DFEB
-:10D48000EBC8EB3C857ED08B8A633B6D97FE640DC9
-:10D49000DC40FB1FD922F98DB41ED81B8FEBC7F9D6
-:10D4A0006DD3B1BEEF1A23AE13E79D93FD466A4FCD
-:10D4B00026BDF0B60DEC4BD50B7A19EABABD1FDBD1
-:10D4C000DA285E1E63EB83D7D1E79D2FE8C9569417
-:10D4D000C6421DD0FD14974DB28AD5CBCCAC5AB5FF
-:10D4E00065DF9D00B7BCD948CC144ED54B4BA65D2B
-:10D4F00047EB4B0E2B04BA546D5F6DE84DEB4BFDC3
-:10D500005213D43BF24839E8D39ABDFFD90EEBD180
-:10D51000F9DD4A368C7F96AE130E6A8F8F585B53B7
-:10D5200067523C2AFCBB0AE1BD8A9D92935A388A15
-:10D53000EFF6431980EF0EC969A4F45ED6184F1CAC
-:10D54000AABDA37F4FEDD6E3FC97D3F9130A6F0969
-:10D55000A92F047A560171607CA7D16F9682FA7662
-:10D56000D67B18C753EB553BE878F4FDEAE7242750
-:10D570004CB55A47DC8067FB4BE6D2A72C30CFD5A1
-:10D5800086C15698DF7A03F45BE29FFFA2D9017847
-:10D590006E311402BE9BB718CA8602FDC8BC92A1A8
-:10D5A00080DF5F44FC1AF42E98EFF26B8C5BF5C0C1
-:10D5B0004F4B60D00C6BB89D3D4BD72B47C8FA59E9
-:10D5C0004198DD27B2DF307D58F0F94BFA4494835F
-:10D5D000658D7AE208B51B5C3E7C4709F363F6581B
-:10D5E000FDDBB3827C5C6EE7F2CAF9B83C91F3557F
-:10D5F000EECC99312C1C9F07812F46E61F41F93054
-:10D600005D371DE8FF38907E8F51FFC981FE911371
-:10D610009F3F41FD242837533F09CA27A99F04A5EE
-:10D620009FFA49D06F2BF593A0DC46FD2478FE3499
-:10D63000F5CFA16CA4FE393C7F86FAE550EEF4FAF2
-:10D64000F0F973DE3A2C9BBCF5583EEF6DC072B713
-:10D65000D78FFD5EF43662D9EC6DC2E72F7B9BB1AC
-:10D660006CF106B0DC0B7CA665C0DB8AE57EEF3191
-:10D670002C0F7ADBF0BD43DE3358FE92D3DD3681CA
-:10D68000E4CA545E6C2E6207362515BB72C15F4931
-:10D690002A61F5D43B7CB9065A4F75D33AA563EF9E
-:10D6A000CA40AE91D67BD7B0F6CC7B489E89D633A4
-:10D6B0007DAC7DC02F5D79665A1F50CFDA076FF6BB
-:10D6C000E5C5D1FA603F6BBF6A67202F9ED6AF6A6F
-:10D6D00062EDC35BC8240BAD0F0FB0FAC823AE498F
-:10D6E000565A1FD9CAEA391FFA26D9683DA78DBDF7
-:10D6F0003FFE5C605202AD8FEF64ED13BF26F976FA
-:10D700005A9F4824ACE75972F313693DCFCEEA859E
-:10D710007DE7CB8E08EBFB5EA56D2198B49FEB7285
-:10D720007265EA27EC35B4AD0093BB5E7743AE3C3F
-:10D730008ED24F218BA07D93AE88D50D6425B4FF8A
-:10D7400056371DEBFB1507B6EFD1CD61758303DBB3
-:10D75000FFAA5B88F5838A0BDB8FEB2A59DDE0C2D9
-:10D76000F6CF743FC7F10E296E6C57F4FF9BD50DB1
-:10D770006E6C7F585E9F9B4FFB57EADD1E1D95EB3D
-:10D780005AC95D4E0682BC36A5833D5CC7FDD6599D
-:10D790003A07CAFDBA0C03EAD9DEFFCA790AF50CCA
-:10D7A0007E92A15EF634F8BD14CE2A84A35038FAD6
-:10D7B0009EE14CFC66AC0067E237E52A9CD508C7C1
-:10D7C0001C1B9CBDDF8C17F1F9A64285B34147EDC8
-:10D7D0007DAD35B6794DBC3441C4E752A50AE71199
-:10D7E000C42731367C02CAB5029C80B24485B31985
-:10D7F000E1A4C4868FCB304E80E3322C55E16C47D8
-:10D800003819B1C10918AE13F1312C53E13C87F43A
-:10D81000E917DBBC5CC6EB457C8C552A9C3F203E5F
-:10D8200059B1C1D96F15E9B3DFDA4D9F00C2C98E76
-:10D830006D5E7936913E79B66EFABC8670AE8C0D0F
-:10D84000CE7E9B489FFDB66EFABC897086C536AF0A
-:10D85000BC04913E7909DDF4F900E15C131B3E073D
-:10D860005344FA1C4CE9A6CF49843326367CF25344
-:10D8700045FAE4A776D3E73CC219171B9C83A9227B
-:10D880007D0EA676D3E70B84737D6CF3CA4F13E944
-:10D89000939FD64D9F4B0827D7DD88F8100AC71AEB
-:10D8A0001DCEA17E227D0EF5EBA68F490F700A28B2
-:10D8B0009C813DC329CC14E95398D94D9F443DE840
-:10D8C000C5E4D8E01CCA14E97328B39B3EBD119F80
-:10D8D000A9B1CDABB0BF489FC2FE8C3E1E63E7240A
-:10D8E0003BF88D89C4B995BE3229F9670761DD51CE
-:10D8F0002CC409608F48816D009FAEADE897CA4E79
-:10D90000D50F7212F0738B6D0E27C403F4AABF43B8
-:10D910005A713F62D99928C49B5ED2E70D077CAD4E
-:10D92000D42B0CF57B12C6C609FE56A22B49A8F7CC
-:10D930002AEA2DF44F291920B4A7955E25B467B8BB
-:10D94000470AF53EE5E385FEFD6AF2847AFF55530A
-:10D9500084FE59BE19427D60DD1CA17F76FD02A1C7
-:10D96000FD8A860AA1FD4AFF72A17E75E3BF0AFD0A
-:10D970008735AD11DA47346F10DAAF093C2CD44744
-:10D980001D7E42E83FA675ABD07EEDB16784F6718F
-:10D990006DCF0BF5EBCEBC2CF4BFBE73BF50BFE117
-:10D9A000E29F85FEB9E46F427D92E903A17F81FD8C
-:10D9B00023A1FDC6F44F347EAC18BFA8CD25CC9F63
-:10D9C000CD30A03F1BB01AB06ED86B66FB1BA827EA
-:10D9D000431CA218EB86FD0B1DC9100F0000D49F3D
-:10D9E000C8ED5D7E05C4AB7E31DE7D05C4717F610F
-:10D9F000708FB047F083DA65F73D7A8C27B64A24FA
-:10DA00001D4A870ECA383D8F271899FCAECFCA79B8
-:10DA1000CA17A20775FDA87F41EBEBF5148F3141C2
-:10DA2000FD59DFAF2C7D7EC838EBFA194AB70E6579
-:10DA3000CF175A60BC92FB603C8FA17330E0A51DEC
-:10DA4000C73860AC308E29B31CC7D908E3A404C71B
-:10DA50003166966BC631956EE5CFF9388F81DE441D
-:10DA60001B67FD80F1E27C322B709C2D9A71D6678A
-:10DA70005668C68963F3A1CFF9384F5D6E1CE3C0C9
-:10DA800009E27CFA57E238CF69E7D3BF52338E05FB
-:10DA9000C781E7300EE94B77316994CFC6CE329417
-:10DAA000833F99314E66E853F11BA8930FCC241B9A
-:10DAB000C671D071693F3224890A3521FFA24F42D5
-:10DAC000FE7C1147F91F124F0BEEC77DB8AF5FCC3C
-:10DAD00051247E8A11DD275573D95CB4737AE60A26
-:10DAE000072D9B0F0C7A04C6D9687566D37A7BF331
-:10DAF00024C3C208F2B4B85E39D51622E7DDFBB301
-:10DB00003C32A4868EBF22CE8EF8A875B54CD28941
-:10DB1000CF4FD07D17A1FB930FE93E85D0FDCA47BB
-:10DB20000ADB67FE3BDD9F41BD8DEECFA09D90D50A
-:10DB3000F8DE091E673EF14BC90FF4FEE2AE9F29E5
-:10DB4000B84EF8C85BE9A9104D603FF356C553269F
-:10DB500004F19BEFEB25D4A939EEA34BC77D2DC66D
-:10DB60000F3A5F32FAB7025DEBFA509AF27E030881
-:10DB70007977EFD443920DAB7D746309995933BD26
-:10DB8000200DB548EAB79CE23963F7350A7D83B4C6
-:10DB90002B6D773A2D41B8C4A59C00FA98E81F80F8
-:10DBA000734B11AD878C7F6B89589F45E4609DF264
-:10DBB000FBA47E0061F17F3EAEC3A5005F4BE81C75
-:10DBC0003328AB674139129A59BCA6D4CEDE55F141
-:10DBD000F12C544800F7D7BE148863135F32F69BCC
-:10DBE000A3EE9335F8952A265709A56BE97C3DD21B
-:10DBF000558BEFFB7BE35DBAE1B4AC7B4481D06C29
-:10DC00004FF8CF768BEDA49C8DA7D2559597539C5A
-:10DC1000BF2780FFB43C0DFCA7789FE4FC0FCA31FE
-:10DC2000E3BFC7E89E06FCEFDCA427C82FCEF7DBD6
-:10DC300038DF17D78B7CBF0DCEE368FFDB5666B1AC
-:10DC40007853432F81BF74E2221DEA1F2AA0663554
-:10DC50000CFFBF73399853B7EB1560EFEDE59AF9F8
-:10DC6000713EDCC9F93057438FDB38DFE672BE2DD9
-:10DC700021BE7B33307EE15720AE37BB5C22602F64
-:10DC80003C77AB7C6B13F8E656F9A6C1F74ECEB7DE
-:10DC90003BEF627CD3E2DDC6F9D6D6F0994206842A
-:10DCA000E3ADC573DE2ACDBC7C5ABED573B9B41BB7
-:10DCB000C09F9AEECA5D7132A4FF2D4593579C0C0C
-:10DCC000B10BB7964C17EAB34A670BFD67BBE70B7E
-:10DCD000EDB7972F15DAE7D6FC4CA8CF5B7597D038
-:10DCE0007FBE6FB5D0BEB0EE3EA17D71FD43427DDB
-:10DCF00049C326A1FF52FF16A17D59E30EA1BDAA7B
-:10DD0000699750F734BF24F4D7EDBDF26690AF2386
-:10DD10006FEB09C4FB2E384F639CF1825371429F15
-:10DD2000935E07CAF129EF102CCF789D28E767BDD5
-:10DD300063B1AC06991C0776F68005E2A79E386AA7
-:10DD4000F713E93A2E8F5B533701D61BDA3E9E90CC
-:10DD50007F956F58E3EB4BB500E2DE94FEC50D06F0
-:10DD6000121845A874F7EE96E74E7D487B5B0FEDE1
-:10DD70000D3209F40A6F2F6E8BFCBC43EA1C9C0128
-:10DD800071D9F78C647B48BC31FCBC85F401BF229F
-:10DD90005AFB391D290F3DEFD92AB3739E23FABCD4
-:10DDA000AD32C5ABD2C0F4BFF2F98C3C62837A606D
-:10DDB000708DE532E3355164D280CF0305BD5FD26B
-:10DDC000707550CF098CC3ECE952FF28E1F9B2C657
-:10DDD000EB84F7DE90DC5B008F73FBF4B85E93C0DE
-:10DDE00081CC5B86017EAEAD32ACA3CD29E877B5A0
-:10DDF0007A5D2B4E2A84BCE92DC2F22D6F0996EF75
-:10DE0000784BB13CE67563F9BEB71CCB0FBD3558F6
-:10DE1000FEBB7715966D5E1F9627BC75589EF4D68F
-:10DE20006379CADB80E519AF1FCBB3DE462CCF790F
-:10DE30009BB06CF73663A9DACF9EE4EF0C5F5FCF3F
-:10DE4000821C1AC3E5ECE0DA796BEAFA06E5ECB07D
-:10DE50005C8672A6D2B7B8C1C8E521559087BFC20B
-:10DE60003A9C02F2D2437B83C2E530DAFB91DB417C
-:10DE7000DE7AFF08F246C81A94030BC8DDF7903724
-:10DE800002A70829204F7D34F224CAA12A47AA9E5E
-:10DE9000BF21959C03F952E5CA22337F4895ABFB1D
-:10DEA000C14F8CE06FF55624BEFE31FF88047275B9
-:10DEB00040B2E5FCBC82F85C58EFE263D75270AD2B
-:10DEC000D04FF60F8175A46BC8578321BEDF758CC8
-:10DED0000A4156F4F969E5253ADD5DB87F28F35328
-:10DEE000E6F70A6F37C731BA9A75A4888C84F3E5D0
-:10DEF0009C636ECACFB83F5D3D12F6CDF4B94C922B
-:10DF0000008EDF393DC27901194490CE3DD157EDE5
-:10DF10007FEA89FFCC81737F0BE8399D7BDC017D33
-:10DF20000DD3DFA79CB7849C2F798CCE7488837720
-:10DF3000661BECCC7F9824D2914CC2F303958E07DC
-:10DF4000B2BF180CE733F7513904FDEA1A343881AF
-:10DF50005C463E7AB2F73DD17301CC37267A1A0877
-:10DF60009C73517A6E85FB8EB1D2B3273BD9937DDA
-:10DF70003CB181D1F908F74FA3D1593D0FD3E271DC
-:10DF80008B22733E7039267768E85F2AD0BFAFD501
-:10DF900081FD0FEEFD2013CEF1BA765F91408686AB
-:10DFA000BE5FC0CE7BBADFCF17F440FAD3DF336158
-:10DFB0007F7CF08577B15C4B981E6EB494CC55C6CF
-:10DFC00004E1C57A8F20DABC3C8A24CEAB07FDEC95
-:10DFD0004855F5B33513E46937B70361F3EB413EB8
-:10DFE000D5F91D80F951385341A6E93CF2E592BBC1
-:10DFF00084F98D4EC179F7343F4F82814823287EC2
-:10E0000056838124507954DC6B15DCD739DB7C10C6
-:10E01000A7D81BEFACA52CF1D8CEBE1170C07B6287
-:10E020003C6359A3B946F49F126B44FF29A326D43D
-:10E030007FEA3AFC94CD4DF15B9EAEAF39D90BD659
-:10E0400039175FE7D8BAAAE257D594556311E0882B
-:10E05000F5AE7AA988DDC37124CC8C70DEA796CB8F
-:10E06000D30D38CED9C6810930EE59AFA986ADAFF0
-:10E07000F61A366E7A4DE8FA5AB92ABEE6E4A820B6
-:10E080007ED1E0FED0F85189201F99605DA46D0318
-:10E09000A3F78FCA4FF973039EABB7285F80FF6E5B
-:10E0A0001EA2FAEF32D655B89E26BDCF38029EEF9B
-:10E0B00014C6A3EF39D4B371782FBADCC8E494CA7C
-:10E0C0004F3D9C7711BE3F30219FDD14620285D702
-:10E0D000215BEA40AEFC0AD3670F97D32A539BC15A
-:10E0E000ED4072B7825C2F18ABCAB963D607D44E25
-:10E0F0007FFC1705EF9991AF29F49CE0558745A463
-:10E10000C40641D505BB9715C3BAFDF18B37F17D28
-:10E110007A7D0ECCFB3CD115815D3A4FDEB48D0A81
-:10E12000D1D7D30A8B63913AB6CFF1D13F30BFC577
-:10E13000F5E2BE674983582F233352C1DE966D54F2
-:10E14000889FE2BE14F64DEABCA9FD7D57B123724B
-:10E150004B48CD3AD8A73FA6B078CF023B91FB50B1
-:10E160007B5DF5875FE740DCA75D61FEAE7A1EBE92
-:10E170003489ED072B66FA0D2EDAFFA3DDA36EA31B
-:10E180001697BEEF5F87FECF74E2DC4EC2E9BEB0E9
-:10E190004EC4AF27FCB5F8AA7E50D8B93CC723B906
-:10E1A000518A785FEA6B6EE754FD4832D885B84FE4
-:10E1B0009AA6AECA81C2E5C0AFB8AD8614C677E0F4
-:10E1C000A324771ADC21FD0CC17E498631D1FB19CD
-:10E1D000A19F1EFBA5B17E9D85B83F26549E860655
-:10E1E000FB9983F0FAB271C57E557F78F6451F958D
-:10E1F000978ADF3D6A2374DDFC58AE4F75D2E795F0
-:10E20000DBEFB5B9687946F6D9809F1FFBF511EFB2
-:10E21000FBDE6250E9E1B248104FE3F249EA7C18B4
-:10E22000A7F862BB62C773844663C048E5B37AF758
-:10E23000D262321CEBC7597DFDA77AA8378BFCAAA6
-:10E24000F8CDA3A90E764F88C5934800FDDCEA6D92
-:10E25000FF5108EB858774A29C69DF83F12F26A10B
-:10E260005ECF372484B7E3C5E054789FFD7876DF2E
-:10E27000FFA9DE06E5E4D3A0471E8D9C9473BF156D
-:10E28000E805FBFD7C833519EDFDB5E45AD07795A3
-:10E290002EC4CFFCD7DA1D8F0F3F4EF13AB7ED2FCA
-:10E2A000366968A89D60F2D6D5B4F0DF4CBAE8F6BE
-:10E2B000A49DCA63A89F4401E37B8E66EE77B7B046
-:10E2C000B25209D8E03E4EE516C5492591543EAB01
-:10E2D00027703F81BC67F4437C74D9B3AFBC339ED5
-:10E2E000D27FD92E25B9984DC722A506F9E3A17F83
-:10E2F000578D0CF2A3E2F7AF181CC3D8F37B9282C0
-:10E300007C59B66B9F810C0BA7E3A4A67D86364B88
-:10E3100004FE341D2F84F5B676C73F0C1057FC78E9
-:10E32000AF44D2B2C2DF2FDFF20AAE7B4027E42730
-:10E33000E75737FFC2F81698F6F268EC67077BD804
-:10E3400013DFB2613F9782F2FDDCCB708FE97DA3D2
-:10E3500013E850FEDC0A1BCCE7B45CC3E4FCD7F73F
-:10E36000A682BE972BBE543B96EC79F9933F47F9B2
-:10E370005B72F4E7A9E83F1057860E6DB32F03E6F2
-:10E38000B978F3AD38CF32E246392CFFB5BE04EE92
-:10E39000995E9049D1AE087AF21703DBBF9CDE4A42
-:10E3A000994BE7791AF003FBF6A6DEBF1DE3E63FC3
-:10E3B000C37B703FE773A62B21D62F9818BFB618E2
-:10E3C000746A3CD424C8EFB6F5ADC0A7B3FD5C6950
-:10E3D00070EE41E9E0E374932E51B8FAA305698C1D
-:10E3E0004FC421E7F0F7A8BD9F04CFA17FABE23275
-:10E3F0000F17DEE3F6918DBF928F4FF18E83F5EB11
-:10E40000746A64FFEF1F7C7EF4A79584C85988BEA8
-:10E4100033FDDF761FD37755FFFDD38BA0FDF3B718
-:10E42000981EC17BB05E50BC0269D8BE6FA684F650
-:10E4300081EEB323E9F93685EBB9D84E7738B8FECB
-:10E44000AB7242F197A5845079A1E324211F707F1C
-:10E450005CB691BE1FE29779605CEC67083E0F598D
-:10E46000379670BB7048630FC8E69498FCE84AC5BD
-:10E47000FFF413A0BFEF199D3E07E8AF5202F3FF70
-:10E4800064E78177E65039FFA449D55BD1AE6AF5E0
-:10E49000B6FCF9312492DE7E62A1FBAE487A4B9F36
-:10E4A00047D45B4B1BCAF3FF2DBBAAD2AF5D433FE2
-:10E4B000B08F2F3BA2D3516B1F37181C11ED23FDDA
-:10E4C000798BE484CBA12A7FAADC55FCB6AA3FD87D
-:10E4D000A16EF954E5AF5B3E55F9D3CE57A49FB674
-:10E4E000FD0FA0DF14AFDB4D9BA681FF6CEA241863
-:10E4F00087CF9DA9C77B9AA6CF09BBA771473CD6FA
-:10E5000067E9DB7E0F3EE10755B386C13A7F3BF1F9
-:10E5100029ECDCBE5E413FF6EB4B9726D0F9CCE10F
-:10E52000F4BD9D927B2AE547A92C05E2289EB365A0
-:10E53000E24B488278B2444E84E0717BB958879FA1
-:10E5400089A941383DF5FFB67EF7772D8F52BE9EE3
-:10E55000C826E46F50E2FE833AD621F234BD859D91
-:10E560006378464BFE01A8876D7249C83EC263645A
-:10E57000F6E768FE2D63807EB9B3862530391F8C9F
-:10E58000FB450FB7635D3E4702D8F7AE9681B82FC3
-:10E59000EC3ABCD0EA8E60CF0E70397B859FC37495
-:10E5A00058A47A3D95FB0ED2897E8DCF628E189746
-:10E5B0009B6354ED34E71BFDD1D3F14BB91CCEA6C0
-:10E5C000AF268C0CE1DBCCA91FCBB6703EC0CF8947
-:10E5D000907DC5F7A52FC835D0F780B9ADB02442DE
-:10E5E000FCA692D36FE2FE2F0DB0EEE5B7E4CA4071
-:10E5F000C77C8B5E88872C32727D1D4A86025E1333
-:10E60000F72F7D600C9563CF61BDD34CE7E769F9C7
-:10E61000D4E08EB0BFD3D213E0837FB9D5C8FCE578
-:10E62000B79592C540D7B76F65E7BD7F3338AB224A
-:10E63000E1996E66FEE66C527261B4F4D3A36FEE9C
-:10E640002C6B208FD2A3CBC2EE6B87CB1FD3FB2EBC
-:10E65000BBE45F2D811CEA593D99DD6F2E24EE0746
-:10E660002648A8EF3784DAAFDCE6E9CFC27D9AEA24
-:10E6700016C9AEA3EDD5729B01E4D8D3BC4B06BF3F
-:10E68000FD260771E1FE5AAE19363324FE45973D4B
-:10E69000A4D781AFE6CC05FA7E36D348002FD7D079
-:10E6A0004F6DB0FE7FD6320AF520DABC5EF7926974
-:10E6B000F90AC061F64C2B0F85C9F142FDD649A479
-:10E6C0002F9C034F34B6AD7046E05FBE89C959CC6C
-:10E6D000F6CDF4FF997D9B40ED1B936B25D4BE597D
-:10E6E0004C61F62D2D927D5BBEDA910672B17CCF26
-:10E6F00040FC7E6BF96B8B5322D9B757F9BEF735C7
-:10E700007E0FBCA32FB56F2342EC5B5F6ADF22C490
-:10E71000C9BF88D5BE99FE67F4EF55B06F11E66B9F
-:10E720003689F6ADA86535DAB7A2BE7AE1BE1231F8
-:10E7300051FB167F39FB36FFD15BB1AE38E323C8FE
-:10E740000FD015ECDB6BDCCEC13860E76E30B1F872
-:10E7500066AC76AE5FAC76EE7F88CEAA9D5BDE4F70
-:10E7600042FF255C0E999D5B9EC5ECDCF23DCCCE54
-:10E770002DCF66764E6BDFF2C2EC1B7BBF7A087D35
-:10E780001FF78F598FDF01F7094B15A789F62F76F1
-:10E79000A8DF4FD48C09B577379864A47398BD73FC
-:10E7A0007E8ADFC1F464EFFE0AF62E1BEDD820D07E
-:10E7B00023AD7C4C19142FDC677BFBCB53BFFD1DB5
-:10E7C000E8CBEB7ABC2FF4AE8EED8FF67E796A142F
-:10E7D000E8DD4326667F9798183FDBBD3EB4A793DC
-:10E7E00086327DAFBA87D1AF7AB7C4E6BB52EF7736
-:10E7F000C03AF0D545DC3FCFDDC3F6CFB38CAD29B1
-:10E80000F1702FE95F14C2BEFB20C5F343E4A1F40D
-:10E810006205C6019F8FB36D85FD65A94C4CE0C7AD
-:10E82000CE3B3CE563F05FE75DAC43BF771E3C87C2
-:10E8300073127E4F42BD4731A779D72B7D48F8FD33
-:10E84000888946C687892B24FF962CB88F20B6CF9F
-:10E85000D3F8F5EBF83CA93F8B74217FD5478CDFCB
-:10E86000ADD3D2C3C9E65FB5522FD2A3468A480FB3
-:10E87000CAD1E2F9A9C1F9CF7DA16D5D1F685F2AF8
-:10E88000E17E4AA587769E2A7DD4FDCA3CAE239EB2
-:10E89000965D0AF04B3B7F957E61F356E9A9997F1F
-:10E8A0009D6A3FAE26C340DFDED5B91F1803F2F1E3
-:10E8B000674A078AD76DB3B3D342EDF183DC2E4D9F
-:10E8C000751FCF4F7500DDD8778973CA77BD924A1F
-:10E8D000E773B32B6B247C3F7CEB570637C4170ED2
-:10E8E000983BD1BEA9F2F50997F70087F3766F7BC5
-:10E8F0003EAE23CD921DF526A0B15FFCFE98E71E2B
-:10E90000A65707A47FACEB331AE90ACB002954D7EA
-:10E9100021E003FDEFD416C6070FF081FE771AE958
-:10E920003C0474AE4E969C01E8DFBCEB5E909B57B6
-:10E93000CDF439E86FB9E464DF97114B46EA65E539
-:10E94000538E249F189CC809AE8BF3A05F52B8DF8A
-:10E9500031D1D8FA36E03191EAC31612EE87A87C9D
-:10E960001F42FF5C8A74EFA70739FE98CBE7AB40E4
-:10E970006F0BD0B5D300FE8C27C0D60FB5DD233B7F
-:10E98000F2913E2ABD9BE9FA309AD15B17819E37FE
-:10E99000AB754E4F4F8BA4C0FB93E9FEB59704A710
-:10E9A0005B5F1E52E518BE87D3D203E20119217ABC
-:10E9B0000FF629F47CB2BAF928D265CA4AEA5E8514
-:10E9C000D01DECD6E5E8134D2FAA9B7F18BDF84467
-:10E9D000A3177BCD9D7F1901F1AF3D12DA07D292CB
-:10E9E00028ECF7E3CDCCCF386076A3FC76BEA6E06A
-:10E9F000FD73AD1DF99ACB3DEC2F42BFFB9B041379
-:10EA0000013B6737938F543C0630390AB5DFAF9A24
-:10EA1000DDC8AF68F0E3F83A1CCD7F52EB37C2781F
-:10EA2000701FD1218E17E65FF0F84F4FF34AE3E3F2
-:10EA30007ED779759F6792560361F1FF15C6907373
-:10EA4000A9DBF8B940779C2CD8CF6EBA4C3F88BF71
-:10EA500004E8BC5FDDF914C67FCF3F737C1AC8EFB2
-:10EA6000B23FEA8989F2B97DA79504D8BD0B03AC02
-:10EA7000B315BBF511CF5108A965DF39FECE8AF673
-:10EA8000A5E279A3BF98BE5FF1E247C3216ED5BE70
-:10EA900086D919DF335C3E7C6DC3E17CBD4266E7FD
-:10EAA000C25A78D7717939F7527C29D849A9917D12
-:10EAB000BF5AD1344B3186ECD3479A151C97F6C315
-:10EAC0007BCBBE1D12C6CBC3F15BCDE0ED60F6AFD4
-:10EAD000A259F1C377B0158D5B707FEB69FCD40050
-:10EAE0007EDDA4DF3DCBBEAF6DD68BF1C3467DC0CE
-:10EAF00088714EFD71E370A6B792108FAA42BDAC2B
-:10EB00006EE271324DFC68D9EFF6BCE8A3A459F669
-:10EB1000FBDFD8C0DE9C6DDD6EC3F85C238BBFC904
-:10EB20001639727CAEA7B85CD37D3C2E37F534190C
-:10EB30001E1E973B0BFFA17A38DFCCF5558D6B3647
-:10EB4000F68AE9FC7CD9B3179E84F3A473CF7FF2D5
-:10EB500024E05FF9CD674FDE0DE7127BCD7658FFDD
-:10EB60003CCFBC8DF177F5BDBBB99CB7EFF8CDD3E9
-:10EB70004F503D6C7FCF88F7B6DAF79CCE84EF1903
-:10EB8000DB777D990AF1CD957B0A703FB3F2854919
-:10EB90006997BB7F02F2E98FE1FC44CB8F03BBF5A1
-:10EBA00004BEE73C7FCC88FE47779CB5A98AC5AFF9
-:10EBB0001D3CBEBA33F279951A0FACDE7DCBCDD7B2
-:10EBC000C33AB85B713AF0398F0FF614577D8BF268
-:10EBD00075440CFCDBC9E3E74D5323C655CFC37F17
-:10EBE000289F3699C5B8EA85DD8BFFED0968DBDD26
-:10EBF0002B6A5C351003DDD4F3B032B36B9B19F490
-:10EC0000E3F9DF621C1BF8467D72D2FEEC854C886E
-:10EC1000479C513AEFC47BCA7B8C78CFA862CFBBAC
-:10EC2000A82FED2F1CC57326C2CFA3DA49F70F3BDF
-:10EC300037E07B1DCF362B8BC772FA43BCD661C33E
-:10EC4000E73C2ECBE4588DD7468BD3BE6F66F7A139
-:10EC5000D4F3B9AA6D1F188826FE2D8D057E1D17C9
-:10EC6000CE15D5796BE1D9810ED7869E3F448B872F
-:10EC700073BB1AC62F76EED0BE859F47749F3310A4
-:10EC8000D277249C8FB373738F5F7A37127FD5F35B
-:10EC900087B7B5FAE98FEDDCA167BCBF1B5D5E35B8
-:10ECA000B3FDAD4A9F735F47B6D39D5CDFE93AD3AE
-:10ECB00061C67363B6CECCE3EB4C35A51BFBEE8D82
-:10ECC000E17B8EEF03CF3DA3F7C37E795DD301B423
-:10ECD000B75A3DAF262CFEA51D4F8A63FE4175F342
-:10ECE000BEE1608FCEED7F09E5AF7AE771838FC219
-:10ECF00039D4F87B43DBD0A0BC831DF787D8F173F0
-:10ED0000CFED1BCECE4522E769B171F89E1611BE3C
-:10ED100067E7A702FC65BE2683DDD2F3386765D7B7
-:10ED20002C98EFD95685C07DF6B34DFA227F8471B9
-:10ED30003F83756C4C904EEBACEC3B3E7D9201FDFD
-:10ED4000CC95D6B1C7E0FBF195568303F6DBB5ABA6
-:10ED5000D9BDCADAFFE54C07BED426DE86E746F504
-:10ED60001A3ADA93EDB9B00FB7E7978C06B1D2DA59
-:10ED70008344974EC07BA5B528CD6181BC5ECC4F46
-:10ED800021B213BF33D4DB0A8B601E7ABBCE6E8EEA
-:10ED9000B8BE32788A85E5CD50ECE2777FDF210F6F
-:10EDA00006817C1CDF3A0F46A7260F46F98DFFAF80
-:10EDB000E5C1F0C1383F813C18018CEFA879309251
-:10EDC0007FE43C18105F1A1D9207A353930783F347
-:10EDD000F19F7930FE9907034A350FC63B1BCA0ADB
-:10EDE000204F859A07E3CC064F01E4A550F3607CE1
-:10EDF000B56115ABF33C1896FB571784E6C1C8BC48
-:10EE00007F03B6AB79309CF73F52109A0723EFFE91
-:10EE1000CD05A1793066DEBFBD20340F46D9FDCFC8
-:10EE200015087930D6FEA100F260BC1EEF6E8D4B46
-:10EE3000899E07A339CE11531E0C0AE73D84132582
-:10EE40000F86164EB43C1814CE89B831D1F36084C5
-:10EE5000E113250F0685F309C2899207230C9F2829
-:10EE60007930289CCF715E51F26068E144CB8341D8
-:10EE7000E1FC17C2899207430B275A1E0C0AC710E0
-:10EE80009F123D0F46183E51F26050380908274A3C
-:10EE90001E8C307CA2E4C1A070D2114E943C185A52
-:10EEA00038D1F26050385908274A1E0C2D9C6879D9
-:10EEB00030289CABE2C744CF8311864F943C181492
-:10EEC000CE28C4274A1E8C307CA2E4C1A070262024
-:10EED0009C287930B470A2E5C1A0700A705E51F22E
-:10EEE0006068E144CB8341E14C437CA2E4C108C3A8
-:10EEF000274A1E0C0A6716E213250F46183E51F2E8
-:10EF00006050386EC4274A1E0C2D9C687930289CAE
-:10EF1000A508274A1E0C2D9C687930289CE50827F7
-:10EF20004A1E8C307CA2E4C1A070EE463851F260DB
-:10EF300084E1F35DF360980383A481980703F37180
-:10EF400076E7C148FED679307E05F8FE330FC63F1E
-:10EF5000F360FC1879306EB5BAFF1E8FFBC6EF96D2
-:10EF600007E34CBC266F440F79306EB5969C05794B
-:10EF7000FEB679302EC47FBB3C18749C7F5C6E9CBF
-:10EF800068793074966F9707838E235BC65C663E04
-:10EF900051F2602458C4FC213F561E8C63F149385D
-:10EFA0009F6879307E72F926E8360BF669D35114E2
-:10EFB000C94F26FFC4680B8F1BFE50F92760D2395A
-:10EFC0003FA5FC136A1E832605D6C3F739DFDFE1B0
-:10EFD00072F101CF43712C6A1E0AFF548CEF2E157B
-:10EFE000F3504CE17C9CED16E5610A61E72853F291
-:10EFF000B3FCB5B05F2FD7E4A118229ED317BB8F07
-:10F00000E6537064AA539CC7512E0FD34A3F3D0864
-:10F01000ECB9796CE43C1433383FA66BE83285F3E5
-:10F020006D3A2F6F874F73A83C17971F9581AED30A
-:10F030001C6D32C6E96F52F9E710F83793C3D5E279
-:10F040003B83F36FC664C63F2DDE6F01FF28DE6F82
-:10F05000958F42FE69F1D6E2A9E53F09E57748FEC2
-:10F06000905C22E69F986412F34F14D8C5FC1337C6
-:10F07000A68BF927263BC4FC13370D11F34F4C75B3
-:10F080008AF9276E1E2BE69F98EE5AADC97F719FB5
-:10F0900026FFC5439AFC179B34F92FB668F25FEC44
-:10F0A000D0E4BFD8A5C97FF19226FFC53EA1BEB06E
-:10F0B000EE35A1FFE2FAA3427D49C37B42FFA5FEE4
-:10F0C000E342FBB2C68F85F6AAA64F85BAA7F94BD5
-:10F0D000A17F4FF907DEE2DF43BFC3BF873EC6BF54
-:10F0E000877EBF87FC17EF5896AE0BCD7FF1BEC56C
-:10F0F000B30EF2121CB738785E81C8F92DBADBA3C3
-:10F10000E4BF08BEFFEDF35FA424FFF0F9087456D6
-:10F11000F63D606F4B9ECE9AF2DDF311DC5A227EF3
-:10F12000D73DAB54FCAE5B6765DF6BCF768BDF778B
-:10F13000DF5E2E7EDF3D22CE2D011EDAFC17BD2DB7
-:10F140002E9D15EC25CF531080EF74B321DE56842D
-:10F15000E541C87F910DF1B6522C0F43FE0B5AFECC
-:10F1600019F25FD0F208E4BFA0E51B90FF221BF26A
-:10F1700067F878FE8C3A9E3FA39EE7CF68E0F933AC
-:10F18000FC3C7F4623CF9FD1C4F36734F3FC1901C5
-:10F190008473C27B18CB93DE562C4F798F6179C66E
-:10F1A000DB86E559EF192CCF793BB16CF75EC432A1
-:10F1B000D6FC19AA5C7E087EC315303E9367554E77
-:10F1C000AF7EE09175A1F933463CB009E5345ADED3
-:10F1D0008C1CF8A62F257ADE8CEEF628793382EF88
-:10F1E00047CF9B9136FAC7CB9B31D7F2C3E4CD987A
-:10F1F0005B23E67598B7EAF2793346C495DC82F270
-:10F20000C7E571AE25B6BC193EABC4BFCBA7740130
-:10F21000BF8BD205D7EB1EF20E1CB43E3D04F61395
-:10F220005D43AEBA6CBE07AD5C44A737CBEF30E7A9
-:10F2300047CE97D1135DD5FEEF57B03C0E732DDF4F
-:10F24000325F460FF9160E667F817632D67C193D05
-:10F25000AD0F3DD173C68F9C2FA327BBDA933D7DA5
-:10F26000730AA373EF1EE8AC7E2F5D696A3D842F9D
-:10F27000DB5DA8DA32FF1E3E77A61DE3331D3BF9A6
-:10F28000BD381771D853D9F7FAE06F763C9F309CA0
-:10F29000E077FC76E2A2FC89E7CFA59DFBF6C1BD35
-:10F2A00080B536E24A4C02678F38F403611F768DD1
-:10F2B00009E23555BB3F7DE38F14AEB9458FF7E5C5
-:10F2C0003A280EADE8F7B912816FF1E497B84F878D
-:10F2D00033BA4BBD42BFEBD6FC1E0EE8921A3C7F00
-:10F2E0002AD05B70DFD4B599DD67D593AB1E9F90B4
-:10F2F0008CF7C689DF81FC433F7519C7B38B106754
-:10F3000000FAEFB4E2FDD525AF2D34C0A070DE1AAF
-:10F310001A37E85524C6811ACCB6E1706F2F5DBD4F
-:10F32000BFE773B5821FBE88C34D2911E3449F2CEC
-:10F33000283A0CFEF3227719DEAB482B15E34684FE
-:10F340007F470FDB32F03365C2EF75FAD97DCFB05E
-:10F35000EFEA9BB7209E4BFD9AFB4B8D625DA5DBD0
-:10F36000392BBF9762219698E8D636F8F109A3BFEA
-:10F370003DDD8CE922DDCC0E916EF14344BA68E9A3
-:10F3800066758A74D1D22D61AC185F53E9A6DEA7E9
-:10F39000FCA1E89664E3F73C82F42A31A5A2C947B0
-:10F3A0003C33E400CAB7561FFA5802F01B7E48BF30
-:10F3B00064FF6A7CCB6995C16EA533D0445AC4DE24
-:10F3C0008B077D80FCBDC489FAA0FE3E8A78F221BD
-:10F3D00097FB8FC8255AAE987EF0F802DABA19E486
-:10F3E0006D04FB3D1A18AF4A22B89F5388D30EFB19
-:10F3F000A826AFC9B94881734DE25C940DE79976B0
-:10F400002C1FE4DF3B770C25B8EF6F0A7C9E0AF7D0
-:10F41000061E1CD9390DE20F9EC5A404D6AF5909AA
-:10F420006C7D5DC64B5B028BCF6C28D111D768F821
-:10F430007D4A7ABF44C76BB7BB5EBB01FCD1167671
-:10F440003F80D83BDFB81DDB47E1F7E119BAFA6B23
-:10F45000001FDA1FBF2BEE68F9C8B630C40EB737ED
-:10F460003F7225DC6BDDA48BFC3D73818DFFFE1D9F
-:10F470007E3F654430DF42816D0CE6657870001D8B
-:10F48000A77A7A17F25195CBEB38FD0F964D41FCD8
-:10F490005E68911C10AF2BD4DF71D3308ADFB8B710
-:10F4A000657EAF97DD5F1FCDFBD79AA9FEA2FDAAAF
-:10F4B000FF1BFC9E95974ECA980F71744D19DE1371
-:10F4C000FCA3ADF030F02BC7D5340AE429BF2511D9
-:10F4D000CF713D1F12277E9AD52ADE07CCE1F7B601
-:10F4E00073DA881F84E2DA6362FBB836B17E9D6608
-:10F4F000FF39DFC6F5D4465241EE367EAD9760FD4A
-:10F50000E8E824CE3514DF8E45BD71FC8ECF09FAB4
-:10F51000891D5FEB8B22DD8F596E63FCDB642068F5
-:10F52000BF379559F0DEF9FEB28AFEE05F7C719735
-:10F53000BB7FA43865889F96C0BEBB772590B1205D
-:10F54000876B2546EFFA8C9208EB962A77AA1CAABD
-:10F55000F2975116E78E740FF5339B8472965736E7
-:10F56000443280FCEC9530FCD5BE86E2759975DBA3
-:10F5700047D6F4017C3CCD9FE17D32538BE48A7405
-:10F580004FE7619B8DDD6F5CE35B0DF7467E419538
-:10F5900008EC5486A13E2B127C1FD9887EE95D368B
-:10F5A000077BCFC4F320C9F519709FA2BD79D2E4BF
-:10F5B0007514CF27A83EC07AB5497122DEBE2A4213
-:10F5C000F09E2C8FD7F59D46B66C08F17F37DB7225
-:10F5D0001B6D145EA38D7D6FD9CBED94006FE77F1B
-:10F5E000FDC306F03B2E1A917FBDB9BFA9BE77803F
-:10F5F000D3675C826B2BBC4FE0979F51E3E374DBD6
-:10F600009C8B46415C9ED23BC40E06F9E663F951E1
-:10F61000DC04CF3F922C3A9443E27239ECC27D76FF
-:10F620001FEA8DAA07242011C853A0DA37A9450A7A
-:10F6300058A9DC8F365902708F2EA99CCE3B19F247
-:10F640009A9818BC56F99C18D7A2F29803CE3DC1DF
-:10F65000ABF3104805F8AADD53EDE5DA44668FD622
-:10F660003E24635ED4CD729B19E2A9592E471EA495
-:10F67000884C921D78AFA65F3971520C49FCC05F6F
-:10F680002776FB0154C9AFF9463F2FD2775B176D40
-:10F69000CCDF1E97E0FE33D06BF8E1CEFDE02E38D4
-:10F6A000CDA417BBFFC5ED04F76B0AF97A37EE3F1F
-:10F6B00074EC7BD1C00D24F43B2AAD9DD86466EB7D
-:10F6C000FCB8EBD9BA37EEBC05D7BD6E3B515688B6
-:10F6D000EBD4C8965107E09EC5C80F997E126E1FE5
-:10F6E000ECF40FD029E7B04F0FF4F9B67641CB6FA9
-:10F6F000123075D787EAE01C86EA5BC8FB6735766F
-:10F7000064C5F441B5185EE672D4FF1EA7DE1D4243
-:10F7100047EDFBDD714AC9D4FDDC3110ECC8113D69
-:10F72000DC0BE9C8A5F3A3F3DFC8F525F173FF648B
-:10F7300098D7C6961BCD20DF6B0379F662FA4EA2EE
-:10F74000A9049997485C18CF19493D32C88F518B4D
-:10F750004241FD41A58424A4C03DB42221DE432CB6
-:10F76000493CFF4B00F9D22DA7548E43EFE5AAF296
-:10F77000A99547557E6BE1A005CE0721624E4BBD92
-:10F78000D484878146B2D90EEBBBEA5FD6727FAED6
-:10F79000D69CE9C7EF977C19E81FADE4FE51ADA5F3
-:10F7A000D084E6605F32AEEB2B217E42E9B0328539
-:10F7B000D979753E5AB9F45CD4137FC83EC123771A
-:10F7C000E27D44CF45033E5FA7B807C0FC55FA5C15
-:10F7D000C3E9A3A58794C0F79D9C2E3DE39B638757
-:10F7E0007BC1892617598FF8E6E13DEEA6C0481384
-:10F7F000ACBFF76AF08D01CF6B13C684E3295BA21F
-:10F80000E099CCF0BC8EB8FFD846E53767455D6D12
-:10F810003CEA15792B3D275CAFB47AA4EA8D1AE750
-:10F82000BDB6B2FE005EBBED416F3CF18C2E4EA525
-:10F8300004EF5739F7C4A31DD1EAD3E77CFE9E78C5
-:10F8400046BF058A7B06CCCFA3EBCC043919EE204A
-:10F85000BD8A2992C39BF5A8E7A435B67BF8AA7F99
-:10F86000A5FA55DA7EAA5FA5DA63F51EFCDA04F77D
-:10F870007C9003A999CA2DC5A7D6CEF64B9B6DEEF9
-:10F880004580573CC53D0EF68D430259ECFB5F5158
-:10F890002FA2E941BC46CE9B0232AE0B3EBA2E648B
-:10F8A0004BE178A8E30F4A48647CA45A0EEB7DDF55
-:10F8B0001CC206AB269837A7EF70E28675ABEF48FF
-:10F8C000769F714D02B3BFB5096CDD52CBCDB692B8
-:10F8D000BB51BF65E2338EFCEE7803AA70DF7C6D0E
-:10F8E00082EB2EA087A9C885F3E863274EF04BFB77
-:10F8F000C84D127C379A54E990D83D7312FC7E8B28
-:10F90000C2EB53ECC8057DED03FB6BE8DF1239CF8A
-:10F91000D8A309EAFD5EE67F3A49771EAF47139800
-:10F92000FF7908529FF42A56F382A9E7394E09E875
-:10F93000D46EBD0D916EBF20313F3D91D14BBB4F79
-:10F9400000C287FEFEBD7B0D44362791E0EF59D5FE
-:10F9500099D0BF8F27CE26B057BB1206F0734C67E5
-:10F960001DD47F25779A128706E55D95E30727CC9E
-:10F9700070422A52DBF55DC3614F45E57A27D0BF5F
-:10F980007D42D760CC41493A3399FCB8F442BE205D
-:10F99000950FCD8AC00733ECC343EDA4D53004FCEA
-:10F9A000D17629CE09F72CDA974A0C5FC9C4F3291E
-:10F9B000C9C23CD3E3997FDDC1EDD53B0959282766
-:10F9C000AA3DA6F3AB83523B0F8F11EF7490CE3D4F
-:10F9D000F1FEAD706EA5C93FA9CD4F3969A105EF04
-:10F9E0007F6CDC63C6FD6B57093BC7EF6A31A27DB4
-:10F9F0008EA6B7696DE688711CB5A4F47B0BE897F9
-:10FA0000A6D424823D4C9B7BD2067CD7D2A543F260
-:10FA10005D7308F645AF2B11BFBB55CBF4F49B12B9
-:10FA200017D1FEE91993B1549F3758E488F7CD4FA9
-:10FA300073BD52E5F14A3A22DF0F9D06793CEF7E15
-:10FA4000F31D1709DEDF6F8863746C886374EC72D2
-:10FA50008F4F781AE4CD9781FAB0583D07E5FB7FC8
-:10FA600035CF943ADE46AF2951A62AD0B0608A1924
-:10FA7000D68914E29A3C1B9475A342E03BA2C7BC12
-:10FA80003B12F3318E6D12EFF9DAD9BDE1CF3716A3
-:10FA9000E077DEA9648D7930A5475989CE09F183D5
-:10FAA000F30BDEB7E9A83C2DE8D39A03F2FBBAE2E8
-:10FAB00026F63118EAC2FDC99252833F40F996DC1E
-:10FAC000400D05A5CB7F03F4A15473008000000016
-:10FAD0001F8B080000000000000BB57D0B7854D58B
-:10FAE000B5F03E73CE3C92992433794E1EC009E1A5
-:10FAF0009D108724BC1F4E9E448830BC0485EA803C
-:10FB000028CF2488D6DFB6DECBC444F4A2B745E9BB
-:10FB1000AFF4D6DB7FB0A2A8200182069AA41340DE
-:10FB2000E4113408A8A8AD5129620BC908EAC5D66A
-:10FB30007BFDD75A7B9FCCCC4922D8DE4E3EBFED11
-:10FB40003E8FBDD75EEFB5F6DA872EC977134B64CB
-:10FB5000CCB7D8C0B64A8C7D87BF1B43ADD96E6089
-:10FB60002C89B196383BB54EE70CC7D284F07E8520
-:10FB700063693E63D5D6D85C16876D7F3F8B85F170
-:10FB80008A58EAD202685BACAE5A95B12546AFDD21
-:10FB90000ECF774EBA3CA48EE12FD8DF3392B12E30
-:10FBA000236B94E2B01F606C0C4350F8CFED56ED20
-:10FBB000D097F0FFE1FD448B2D20C3B8CCA35CECC3
-:10FBC000B0F047BE1B281E4D66CC285E939ADEF827
-:10FBD00046CA652C7672116370DFCA5C8FB22CB88E
-:10FBE000318CA99E18C6A2D833F6F3D98C19F07DB2
-:10FBF000584757F3BBFD7C00C71FFEE54A0C83FB4B
-:10FC00001F29C118570E63171E3C15E3B6C1F5072F
-:10FC1000E5723FF46F4740C687F0926F870BA319D8
-:10FC20007BC4EE1981EBBA63DD7F8FF1DA42F7D93D
-:10FC300003703195B1157E19E7E6F0C27FABB65976
-:10FC400019B384FA95F509117DC018E1B5D2CCD667
-:10FC5000D4DB7AD26305D203E65DB17D8B295DC525
-:10FC6000F9BD93ECD0BFA0C0AB80EF0B0D317E5F30
-:10FC700066089E25DB4799D2E1D6474D661680750A
-:10FC800030A5DDC86C84B50A09F0E61578D3C379D0
-:10FC9000B8C54AE3DDF57F65BF1996BA18E67A2044
-:10FCA0001E9E6F5A51C1727BAEE3AE3FA8652940DC
-:10FCB000BCBBFE4D623E953FFF601E3CFFC0235F14
-:10FCC00020DDF4EB5CEC337ED211B16E376300CFF4
-:10FCD0003241EF3B1F8DBCBFACE9311A6729F39A63
-:10FCE000909E776DD4DFBFE933E4BB654C095D07B7
-:10FCF0003C5C3E9265453CDC618F493C0F20038FA4
-:10FD00008DFD0EDEDF7D64609C37A7277EB5F6E2B1
-:10FD10003AE06F33637F5E67A1F6C23A46ED08BBF7
-:10FD20004AF459DD74F27EE4AFAAC65D261CA7C56D
-:10FD3000FFA78409F04861D3373232572173DF7B44
-:10FD40000EF0F92326B3EF007FBB19E79FF546CFEE
-:10FD50003D48AF1BAF96D37DFDFA1769FC7F249E0B
-:10FD6000F86711AE3B17AF2B5FF6B6AE9FE2BA80D5
-:10FD70009FD95858977CFDEBD2D6A3AD4FBB5F29D6
-:10FD800003DFF5F2BEC6EF23843E58FADCACF5691A
-:10FD9000808ADAE6CFFA77103FB1D328BF1A3F2D19
-:10FDA0001374D2F38D46C76EFE68FA775A9F463FAA
-:10FDB000E07FA7C1896DC06918D7934FF47CA1E794
-:10FDC000834E63477F945F3D1F744A6C416FEBFA2B
-:10FDD00037FB405AD752D55D6687FB7731CF7A3BE8
-:10FDE000AD67235DBFA06C3CFC3394ABE7385F7715
-:10FDF000EB3933973776DCE847BDB936464D71D8D5
-:10FE000004FD80CE9DBBCC3E7C4E9BE7FC3AB77B8D
-:10FE10009011F15E4EED9FD779DC830687EEDFFD12
-:10FE2000AB2BB12ABCDF358C95A3DC77C644C2BBB3
-:10FE3000CF2E133CFB900EC87F4AFBFF7C803AE933
-:10FE4000B9F631A847CF7FFB5FB11E78BEEB5B737D
-:10FE5000796FEB3C2DE807EAE5B413F8EC762167FF
-:10FE6000B73755125D963C33CB84FCCC1EE0F8B41A
-:10FE7000C01FEAD7B6A8D867711D8B1B24D2237A7E
-:10FE80007ADCE59AFA39EADB3BFD85F47E0FFAB0BD
-:10FE9000C789BE77213D8685E831D6A1727854F8AE
-:10FEA00003BEB943F0CD79658DC9007AE4FC338097
-:10FEB0006F007995C2DCBDE9C1FE0ECE877DAD47EE
-:10FEC000BF8EBEE05FF65CCDFA3486EB1F654AEB71
-:10FED00045EF68EBBF8BB96249EF88F5B28E1B49DD
-:10FEE0005EAB2D7C5E6D9D2B9AEE9C817C51B5198D
-:10FEF000E895D973DDA87717F7026F997CD16881EF
-:10FF0000F7BA1E905CA86FFBA283A627EE12F85AE0
-:10FF1000B96DF10C349A8B613E3913F5D1176FC668
-:10FF200024A25C415FFA1E7A35C91F9B711D8CE3C8
-:10FF30007B09E07B8374FDF45BB6B9D03D28ECB956
-:10FF400015FE9BDC83C2F5998EAE6CDBACD0F364FE
-:10FF5000B7DD26B4C7F10EA1BF845EEE5BBE60E1E3
-:10FF600000E7DA1D0EB26F6C8D83F46375D3165300
-:10FF7000B8DDD5E44B93B7B10E3BF15955E313F41B
-:10FF80001CE85FD501FD4A4BC7CF6F55C3F0394E12
-:10FF9000D051AE30A1FEEE4B7F82BEF9B2236C9DF4
-:10FFA000231CC2AE08FD7B2DFDA0C1AD1F57D3079A
-:10FFB0001ADC1ADF6BEBD1F37D5FF0E9E9C2989FA1
-:10FFC000FB0B3AFAAC427A84F5115E05F0DBD66C95
-:10FFD000F53F04F0B6491C7E5F7314C1DFE92C764F
-:10FFE0009F033FAF2A7521B527F0C554F4EB3CD3EE
-:10FFF000109F9A3FC70A1222FC247DABF93779C2C1
-:020000022000DC
-:100000009FDA1BE5CE0713093F4F02F2C3949A8E85
-:10001000391620D9AD8EEDE50A8C3FE5898E395130
-:10002000D05FE8D8C1FB5B3B4E595C8CD5B057CA5A
-:100030004BA07F3BA013C7BB565B60F62C44F95D19
-:100040000D7E9205ECD1EAD3430EA1DCAD6EAF2854
-:1000500097C0EEAC068323813DAA74C706ACB9D421
-:100060006713E0B9E7EDDE65C42F57EBC86EAD3E10
-:10007000AD70B9399248EB5700F62878AF2E1AFCCC
-:1000800055C0575DBCC5559B49D77D51F1D877AB5D
-:100090006AD8758D1EF81EC25167606E07B4AD47F1
-:1000A00087C4757C8FDD6E5DC72A14E08383EB2CDB
-:1000B000D4EAEF179AEC83D0EE151A98B7377DF98A
-:1000C000A483FB8DC0E4E948E7AA23269277FCA12C
-:1000D0001F5829F4511510280EE0A93CCD02D1B1CA
-:1000E000F85CD9E70AB60D12FB24C25F61A1BEDC41
-:1000F00037DCD7DB56E17883C3F984E3A948912A3A
-:1001000094B0794B6C51117D39C5300CD7C3E4687C
-:10011000D756C0AF9C6E58B31BD62F0F8016F0A1D8
-:10012000D85DF2626837164F9197405B6BE476B505
-:10013000D6C09687E3E905811FADFDC0E1D98A7479
-:10014000BFF456FB182BE9AB0C3BC9B9586FADE4B3
-:100150000A50DCD4CA5C5BE15A9DEC619C8FEB19C0
-:10016000F2F11B621C97D9B047057E6D747C40FC90
-:10017000EB8A33DC9B09FDC0131FF17EBAE14A26EE
-:10018000F0F781273ACA15900757B6E1CA40E81F31
-:100190007AE2637E7F220C0906EAF0139F94FB6CDF
-:1001A000382ED7676CBB3B1BE7510C12C9A972C034
-:1001B000E4AF85FFAD8BE5FC54073C82FCF786B0CD
-:1001C000B3EB6B8A5EB602FF2B456E750D8CE3C7F1
-:1001D0008069F4DFDF6A7894AD068A53B0457CBF4E
-:1001E00029D6ADD18135B8B367A15EA87767CF8E28
-:1001F00041BC7A4F225EF3DBDAA7A03E6E78FBFDAE
-:1002000031E8AF22BD709CFC3688DD603D975EEB27
-:10021000B7450E8B473F7014BEE3003996DCDC9F78
-:1002200094543B5B047257EB66AA09D695A28BEBFC
-:100230001A18D72FCFDB3D7FC4F7584680EC4DA16D
-:10024000C3FB31CEAF8F57597B7CAF7A59AFB74CD8
-:10025000B90FC8E8E7C4A737BEB704F5FBEFCDAECA
-:10026000C12AC2E5660F003C3B0D4C61F1C426C3B8
-:1002700094028C3FA35D1B50EE5DCCE90339C33083
-:100280008D80845FE298B0B855AC07DE2F61D08EC8
-:1002900045F86EA0F5C9C857A3984746FD3586F9BD
-:1002A000ADD87635BFE644BC3D19C5EE40BFCFB2F0
-:1002B0008DB9FD61FA63403CF7F726251809EE6811
-:1002C00063FD6CE4D7E82F981DFDAAAEFF342938F2
-:1002D0003E08C874BCEE3A6C6008E70B46BF3D0EA2
-:1002E000FAC1E18AFA2C0B8DD725E8AD8DFBA44924
-:1002F0001DEE407D93C0FB2F1472FB1CFCDCE47FE1
-:100300003613F16359E30F932F673CF75BBD494503
-:10031000F1F1D0D63747339C7F6C4BB401E9F0F252
-:10032000F6BC28E4879D881B587FBCD97E0F8E17AA
-:100330007F05E0CDA4EB6EC2ABA28E8A03BC4E98C3
-:1003400066533700DE5F88AA9F86FC1FDC6160CFA2
-:10035000C2143B4DAE59D8DF7959B5A3BE7D21B348
-:100360003E9AD6B3C340EBD9191D1CB116E0DE305E
-:100370004C2947F8142B53500F2B8622F51EB83EFC
-:10038000349EDB574D2F2F88E7F2F3A404F3E7E107
-:100390007385243FA5B28DE4AE2BC8FC669827690F
-:1003A0006EBB8CF4889E05AC847CAF046406FD496A
-:1003B0001E46498D4936A35F257DEBB62D06BA4F03
-:1003C00011FA76CA87AB2B78DCE33A3D11C63B685D
-:1003D00033325CD764D621A33F38F92A7305907F66
-:1003E000AEF278C60E7FE83F3DAFF3074BC578EE1F
-:1003F000A0BD042F17B2483FAE7473D9E712CDA346
-:100400002A68A78B2DBAFBE8E7C5621B193795C58B
-:100410000BFFA63FEBFF1DE937E05E98EF3E3B9FE9
-:10042000AF54CEF915AEAFABDCE4423CECB2B9DF71
-:100430009D887AB1DDC8B6B2BEE5E979883FFDE0B6
-:10044000730CBB6A65FE7CE2471BAE67C4E68DBEDB
-:100450002858F788417C7CE43BD42343FF333101A7
-:10046000F5F855A15FB456E333E4277B1CE727FB7F
-:100470000D2139BC333E939ED3E40AF90CC7D96FE2
-:10048000F42FF4F46227813FEF44FEDC65631447E8
-:100490003D966A598072A5CDF3BCE0637DBBBE6614
-:1004A0006DAB11D7FD15D80380BB24EDAA29DC9EC6
-:1004B000EF49E27C552A7F4BFE766793C4D0CF4F3D
-:1004C0006EE2FA3B9C3F527BE78F5F225EAFC51F17
-:1004D0005ABCB0FB87F2C791BF8F3F365C933FBEDB
-:1004E0008D453CDCD75C9CC2BEC7BF6914FCD0D72D
-:1004F000FDF156AEE7F4D75F1178DD67DA383D17C6
-:10050000F5C0CD0617CA39503F7D36AC635F347FE6
-:100510008F296BB2B0BF4BE17A65579399F4CA2E1D
-:100520009BD74B76DC6961E83F30C5DBF133D4877C
-:100530006916754318FF2E8DE7FC566F0C8CFF0C67
-:10054000FDE2A39CCEE36ECE934DF05CEA522EE723
-:1005500005174C5B300E2B4D28DC817C7402751620
-:10056000B4D5E7E029407CD53913E9BBD75A4E967C
-:10057000617E11FC1E37F2D9D8FD27CB8A72F07943
-:10058000AE4FF78A56EB8FC735C5B3EE78D723EC5D
-:10059000C678C6F59207F92437D4676E23C56B1A5F
-:1005A0003FD447033F805CCC67AA3116869C73CE4C
-:1005B000F330984336A73C92CEF303D3283E9C7B7E
-:1005C000BAFD55D0CC6C9E47775FF0C17C1D1F8073
-:1005D0009D3D1E8FFED2F180C980F399D664737F52
-:1005E000684D16F293264FF4033CD5FF61D8B31B38
-:1005F000C2EC7B6C0297A3C75D0ADDF77598FC839C
-:10060000E1D2BF33FE5EBDB03F9FA33C63FC70DF11
-:100610002B0BD18EE62F771F44FC4F4F92E9FA2F18
-:1006200058C09285F47129E497D51BD5E2CFA4D0A8
-:10063000734CF10CB3C1FDFD49D1F9387F6982F7E4
-:1006400022D28929C123F8DED80979F9285FB65169
-:100650007509688F34B801AEF2ADB6101C1A5C672C
-:10066000055F94262CBE88EBC7F750BF347E7CDE36
-:1006700082EF6B74AF6FFE82D33B8CFE48EF10FDB0
-:10068000A53BB0AFE1E12BA157B4FE3F4A7F2D7FE0
-:10069000704DFA637E20F6EFA2BF352129447FF02A
-:1006A000B3E2B1AFF7B3EA4DE077E7F4BC5EE82818
-:1006B000A4E75D265821FA552D1077A23C7A1DB487
-:1006C0002FB0C7CEE7EAFAC3F9FEE022B2C109F1C2
-:1006D00084F76A537008FA21A30212F985A340F047
-:1006E0001791FF95417ACF25F0C4CE4BD2F961DC4A
-:1006F00045FF2E1DFDC34002FA51A3CC1501E4F7BE
-:10070000DDD629E9E8D7E5592765215FBD3AECBE7A
-:10071000E368825E4D5BBEE73935E4FF68FAEDA021
-:1007200018569BBF2081EBA11B41DDA21F882E63C1
-:10073000381C9A3E47F2201C5260BEE13B2BE9E593
-:10074000A60EA0C78D0807E0A155620DA8CF0B0D1E
-:10075000EEC462F4D392020AF7F7BEE98FF9C18AB8
-:10076000A637DE43782B703F04E35097F162773E63
-:1007700062604F3F58F357B4B840F367B4F813FDC5
-:100780001EBC3F405CB79B0140B447018BBF06E6EF
-:100790007FF2B23ADC2DE4568175548875CC64ED55
-:1007A0000417FBF6BBEF26017D66087C541C81B85C
-:1007B0003117EF337633E0E16685C79337BB207E90
-:1007C0000CE3A399E322FBF89B921C1AE75ACFEBA8
-:1007D000EDC044DDFECC3FDA1E017BF409B8CEC784
-:1007E000D6F1B874C240D9A7A0E11C9769407EAC8D
-:1007F00016F60DC2E85EEDD24BC22F9E60E8C875BA
-:10080000017E5BF7FF8DECE081FD7F7B07FDBCF196
-:100810009F2BCC0CEF4FF8BC200EF5041BA7125FEA
-:1008200069E356FFA9C1CAF875E2FF2AB1F6C30011
-:100830008F7B28C267A1F677179FDC84E37D794E12
-:10084000E1BC2DE62F337907611EBBCCC4F30187D1
-:1008500025EEFF68F70F1B016EB8BE2941CB0BB424
-:1008600093DDC79F398CCE37633E202F44D79B2F13
-:10087000947FAEE4F6A40FFEFE37F2015A1E60AB81
-:10088000C01F3B78D6A4025C531BEE51D0BF9EEA3A
-:1008900094993B6CDE9B542B7387E5039E49D0F9FA
-:1008A00023075FDC3403EC49759BEC8A42796DDAEF
-:1008B000753C17FBEDB2CBDA0B1FE9F13BB5E91E36
-:1008C00005F9DF98A8927C5F6BFE0923804F6E408C
-:1008D000BA33F2EB3AC74824477AFA1ED8FFEB84C2
-:1008E0008E9CBEF1DD17FDF574F8DDC522DAEFB997
-:1008F000163DF47CDB02EBF4C1FA02B04E1FF85D4A
-:1009000007D6D9A97F689D93FA1ABF5637FF3601DB
-:10091000FD368D4F4B1338DF8CDFB72981D942F478
-:10092000D2F0F5A1B0577BA3347FC3356F065C3A94
-:1009300005768718D4C7DA9D6342F66BFEE932F27A
-:100940003734FB355F5E544A6A53D82F4C23A35E7D
-:10095000D3DBA9B9EA6223EBCD3E2D88EC97B76DC6
-:100960005462A867203A4992C087F0B33538CE3038
-:100970000FC1A9A7A706971E1E6D7D9A7F3D5FD068
-:100980006FCEA04C23C2DFC3AE8A75E2409887B811
-:100990005EBBFAB58E9FAF5C28792BB717BEED8B87
-:1009A0007FF5F7357D508613E451EB43BFC298982D
-:1009B0004C742BBB6A626EB01B2C238A7D1A66575F
-:1009C00058C550E29F7B851DEE8B7FAAAECACC9B9B
-:1009D0001FE22363E31356E4A37DCA462BE62727D1
-:1009E000DB66D5C6019E4AFE543417FDBCEA0E03F1
-:1009F000C3145669D3170731AEAF7E8FB9502F1687
-:100A000035B51623DF1D52DA658AB3BF64EC893031
-:100A10007FB1B1A9D68AFE5463A24C71FC6107E78D
-:100A20004BEDFE9644AE3F1ACF5D9EE1EEE5FE191A
-:100A300071BFE4E33CE2A3B24741AE310E4D8AA15F
-:100A4000BC4489649F53817EC84D46F2F3218EF9E0
-:100A500023EE035E6A34EFC2D47E69E323F7D881C4
-:100A600010F5FFFD698D19F30BB324D7B3F05C9932
-:100A70001A6CC57ED9DC4CAA7B18FB3F32F9B3C196
-:100A80005B25CA8B9401BB60BF6C51A61FF313FB9F
-:100A900025DEF735F37D0266F725CC8079DEAE489A
-:100AA00018B581784AEB0FCEDBC0042387C557F712
-:100AB000ED9549CFDC572AF971BFA9D49ECE7C6150
-:100AC0007C55F6A889D635BB29A508F9784EB9CC4E
-:100AD000FC61FC1D107EE13C0FC4E161EF1D8EE264
-:100AE00070051703DC52486EA7093E9FC5B89F38B2
-:100AF0007F4142C47BF0C62D688F6E6D8238157AB7
-:100B0000D344FC7AAB373D625E0FE37ECD09162CF1
-:100B10008983F1FB250D24FE9B11B48F0EA8A877C5
-:100B2000CE24A25E63C3B89C6872572AAFAE237E00
-:100B300070F27DB2791248938CFA2F529E668E8B9A
-:100B4000ECCF72F7A83788907FBD5ED7E47E5EB3A6
-:100B50004CFB72F30A2517EB453FE8FDECB1D17D64
-:100B6000E8856FD587E37AD30B1F96FF5D7AE13571
-:100B7000082BC681FCFE3451E8877EAC1FEA875201
-:100B800079FB26E4972EB077E65EF845B3175A3C1A
-:100B90005E06F24AF27E91EF67945E4D65BEFC50B0
-:100BA0003CDEAD2FC09F70F5E2E73C9D984572D4C6
-:100BB000AD5F34FD11E64F18C7FCE3FE4429F89100
-:100BC000A63C842F83E02B633C1F5886854398976F
-:100BD000737E41F9966A88F329DE67BF25B850CF46
-:100BE00049F12139D0FB195A5ED72AF2087ABEE8BA
-:100BF000CEF3CD35521D8CC61765762E1F657365F5
-:100C0000CABBEBF9449B4FCF1F015D5EE69AFC2106
-:100C1000E4EC87F24773A2D8571DC4065D0F5F68E6
-:100C2000FCA0F187DE8E1CD3E567FAB2236FA21D0C
-:100C300019DDB71D797D9891F4B5DE7E68F6E2770F
-:100C4000495C2F6724F27D8E69C3E7D9D0EFB026C7
-:100C5000F13A0DCD0E75E79736737E78BD63892224
-:100C6000A13D41BD9019867F916FD5F8AFEA5189BA
-:100C7000F28D15422F7536F3FC5B7589ECB7C0FF1A
-:100C800016373DB189F78D949F2B545A150B8C3B29
-:100C9000D325B930AFE316F9BA196E89E7EB5C9149
-:100CA000FBF42D3AFACE117C349305EBD01FD7EB31
-:100CB000A53957B95FA0D74F73C4BEFB1CDDBEFB7F
-:100CC000554DDE07B001FF4C7FC09CF4FDFE80F661
-:100CD000BE46478D7E2AEEC5A11C1DFCC6A4C6706B
-:100CE000FF19E937F5AA42E3D893045F0A7FE6CB00
-:100CF0008B79BFA0984F3C5FDDF485C93BB26FF89C
-:100D0000AFE5B7C6A29F3E3AE4B76BF34E53184B1C
-:100D100047C74C674F6689EB3FD47E0CD7AD43A3E2
-:100D200083A6477BE059E8D9BEE8742D3DABE9B313
-:100D30007FB69ED5C6D7EC8036AF5EFFF615B76995
-:100D4000FA74FD1603E54B268BF878B2C8C3CE4F74
-:100D5000E2F1C1AD493CEEECFACA62407BB9B38521
-:100D6000FB272EB3FD38FA05A17C1FA7E7C331CCC2
-:100D700087FBEC4C69B7D0BE67119012F73DD3F8F2
-:100D8000BEE77625E0213DED52580DC8C9397C0FEC
-:100D9000E679F8806F21EAE9873F1962A0FD77259F
-:100DA000D08EFEC9D83C85F68F1C6695F2C19DCDCC
-:100DB000663BBED7B5EFFFB41A719CAF980B43B832
-:100DC00043CDE6EEFD1BD407A5729B8CF9FBAE204C
-:100DD000C8083C3F6941A018E3A0C9ACBD16E57B3B
-:100DE00002D2B117FAFD2A498BB37BCFEF173773C5
-:100DF0003FAE3846263F6E8AAFBD18F7ADA62892A3
-:100E0000AB169FD5E5F75FD1C51FA1FCBEAAF0FACE
-:100E1000435DFEBE91EB99EBCDEB4F40DD067CBC14
-:100E20005EE373A16F581FF9FD9D26BEEF133C6969
-:100E300064E807B30B89BDE663AE95E7DFD712ED33
-:100E40005663719F8EFBEBFB5AD2DC6A6EDFCFE7F5
-:100E500076048BD03CEEDC3E5BA1FA35911FEDB100
-:100E60007FD2C7FE88BBD17E08D5695FFB21C55FF5
-:100E7000AA94F6B95EBC69750B4CD43FDDC8B49F2B
-:100E80009BE474E7F96837F2F9CEF3696E84EB7985
-:100E9000C1A71ADFEF3B77399AF6414D6E15F78FF0
-:100EA000830E8BEB59E25BCEEFF5A943FCB84FFB09
-:100EB0001B21173BA383C7B213C3F73DF83E47CBB3
-:100EC000BA47679F33D27EB984F9486D7FD90772DC
-:100ED00043753DF18CE20F23AB67386FAD9BFD1A74
-:100EE000DB2993D438C4FBE5446D1F538DA33CC468
-:100EF000B757A8CE508FFFDDEB9807EB511AD659A4
-:100F00003C0AC8FFABEBECD46F5CE7A476FF3A95E4
-:100F1000DA878EC73E8076BFDA6DF22861FAE39DEC
-:100F200064EE77E5657F524CC5DF7F6354873EE50D
-:100F3000C10E19F5C58D57611D117527CA65C437D6
-:100F4000E537B342FD4C69710CF66FBC0AFDB0E7A2
-:100F5000AF2439B83DAA53EA462793B4105FFC2D5D
-:100F6000C9DD9104D7EF71783EC176B734FFE02533
-:100F700046FD73BC7FAB7C099ECB0F14525E391FBC
-:100F8000F3CA7934EC42C4DFE85613ED976BF9DD10
-:100F90003C4DFEBE8ECC33E78BBCEEABAC83F2CDCA
-:100FA000051608B40C0817A79F5B9AE794301F98A2
-:100FB000647261BDC3E82C4F3EE6635B9318C5477E
-:100FC000ADADC9196A0E720FCFFBBAB5BC2FFBFECF
-:100FD000BCEF918F627DA4B7AE9A687FFAC8A9581A
-:100FE0005780F60B2DE4FF69F5C82DD1BCCE806586
-:100FF0002CA03CD38DA29ED162F69A93495F050E38
-:101000009E80F77E7F99F17DC7F60F695FBBD83070
-:101010003C05EB7E0F4A43E3B07DEAA3D81C6A4F40
-:10102000C55E44FCB418AC2ACE7B669D5A82756DB1
-:1010300027D6B112AC637B6B9D85DA93EBECD49E23
-:101040005AE7A4F675B88EFC731C9E477E71BF6587
-:10105000A37D92296FD9146CF316C650BBFBB6184A
-:1010600013C2DB12CBB66BF360BD5A203AD080C9F5
-:10107000FED6A7BC8F59FA81DD337B474AA3186B94
-:101080007BCA3B5D990CE34EEDFF93AFE0FE9BC93D
-:10109000CB1EB3005C734FD91ADAA0FF76F2F2C709
-:1010A0006CA86F8F4783D2C3F5AE38EE1E0474432D
-:1010B000A590C605978D837E82D65F31BD6412638D
-:1010C000B71477643360ADECE495D32D80C75BAC87
-:1010D000DE1F63DFE44B9A5ED20FFBCC87F56041E5
-:1010E000C948713FCB9012B1FE65A6C3FB4672584A
-:1010F000FD9E5BFA13ED338D714BCC41871F8CB491
-:10110000EFC5EC1F2784CBDB4C47E91B488F89C90F
-:10111000BC0E78F424C91D5E5FA17F6EF439B5045E
-:10112000E934E642591DB633CB1DD4F72C185B8742
-:10113000F25C62EBEBFD627ABF3C99D78D142952C9
-:10114000445D89FEB97C6026F48F8347A3294F3024
-:10115000FAB4B716EB4F4B9D9979B2A6FAA8EFD81F
-:1011600082FB6DA32BCE9424A0FCD824179A89313E
-:10117000ACA32E01EE17DAB1A00AD7F54431D6FFA1
-:101180008C562517A2ADD0DDDA80EF17BA625C85E8
-:10119000E88F9F564BD0F49C52469D2880E7A60EC0
-:1011A000925D1618E854E0A68997A05F382C8EF25D
-:1011B000BC85CA9A2B27A81FE3AA51711D5B7E5DCF
-:1011C00045E398C9AEEF9E51FC2FC83F459E38CAF3
-:1011D00009023E4AC2EBCA60DD0477A15DF64749C9
-:1011E000C8DFFF5A6287FEEEFE1296CBC37CC3FFB8
-:1011F00042F78F44AB5100E86E93BD04C7DB6D929C
-:10120000EC0F51DF538CCFFB861855CC1F9525462C
-:10121000458C3FB5441A7F0EE1CF891B85D7CA3371
-:101220001C11F7DB6EB3929DA8782B87FCA2B6DB6E
-:10123000D2C95E54BC35A908DB3603F7D32BDEAA2E
-:1012400028A7FB061E07572CFC915BF429EEAD582E
-:101250005849FD5629E52738DF959CB83CCCAF4D61
-:101260001B945AA244F8810349FEF3447EAFD03068
-:101270007CD32480FFDEA37C9FA2222733E2F919CE
-:1012800005524978FDA8675254447F7689A324BC4F
-:101290000E756E456A44FF96B99911FD92A30564D7
-:1012A000BF410F5494801E380AED5260C1025107AD
-:1012B000A5E59F0A054B15B68BBCACC2E3EB61F00C
-:1012C000877AB0C41669A77747733B5FCED6D0063E
-:1012D00049F911BEBF5D9668FC24DC4E94CB1536EF
-:1012E0005E97158987BCA346B2977931921FE3FABE
-:1012F00092A34BEBD0F4966744BEAFF961E5023E92
-:101300006D5EE673B7A33FA2C1ADCDAFC15F2E2F17
-:101310002AA17CF735D6A18797C17A503FE8E168CA
-:101320004A16FE1AF81FE4AF897324F04BECCD7E09
-:101330006BFE7A05E82B47B8BEB2498958B7D797F4
-:10134000BED2C6EDCB2FD3C69DE9F0D0FBEE1D9FDC
-:101350009E9A2087F5333F4E880FEFBFF8E9A688A5
-:10136000FB491FCF7184F7B77E3A07EF4F51D45A2C
-:101370001BF0E53126B97CC8076DAA1203F4283E9C
-:10138000EDAEC3B6F4432F96ABB2A9E77C75D84E49
-:10139000BCE86F33C3BA6E1A26AB18BF6B7E881ECB
-:1013A000DEBF26F3BCC3B1ABAA15F75977FB542BAC
-:1013B000FAF3BB1F54ADE887EC76F37319EE2C03F8
-:1013C0009D8F7167F37AC5BF24F3BA834EF1BED601
-:1013D000FA8DDE4E841BEBCCD137A8FA264875E592
-:1013E000C7D0BFCAE9E95F1D53FC369CEFD8837EA6
-:1013F0005BF87EE2F5FA577F041E43380A99E40948
-:10140000D723C596284FB8DC96DA1D11FD93C20F7D
-:1014100099EA4C8D78EF263533E239F01B87A15FCE
-:10142000526B62546FEB33F07A5B3D1E57A4F0F8B9
-:10143000CE65B3A33B83FB66726FE7915CC5865EA6
-:10144000CFB7A5A4707FF03F5218C1352B85C3A735
-:10145000AFAFD5F76BF17C0FE293B99CC8E72EAB29
-:10146000E10AB8BCACE0E927A6535D6DBEE1DE2C15
-:10147000E8573CBD753AAFAB35ECC13ADB194F3F8D
-:10148000CFEFDF60C837823FB0CDF7C274AC2BAF6F
-:101490008AE2F5095551A23EB46E7444DCA3183EAD
-:1014A0007E6A21C69FFB8D0CF3FC8F99C00EE685EA
-:1014B000F6D9AD661EAF5A4DBC0E7C7DE6A9F5A8E7
-:1014C0003F3E8BF2E6A5509EB148453C5EB45BA81A
-:1014D0003EF4BE7DA529C807B35278DE2B7BCF44EE
-:1014E000279D2FFBE7C151FC7D7060FD308E73712D
-:1014F0007736F9E5D903189D27D1E801E1335D8FEF
-:1015000082F081CE6330B713F36FB50E138D332B9A
-:1015100085F3E3F5B63DEA89E30C6B7641BB2085A4
-:10152000C7CDB7E2BC046FB0FF2CDCD0B307FBCF54
-:101530001EC9FB486F59CE0BA27F1BFC510CEDC39B
-:10154000BC1FCDF1C63282B46FF3EEA26CD706BADF
-:10155000CEF1B8C03FB0B643C5FA0F7F3FACB71865
-:10156000E8F42E457CDC66F60F26BEB2AD89C17963
-:10157000AEB7DEB8EFF921E0047B327F3CA79736A7
-:101580003FE0D882747C579C3BD1E001387E8C7060
-:10159000687075C3A3AB3FEF147E7B278E971BCA81
-:1015A0005357FFC940798A6A09F424F4F77CC85C70
-:1015B0003E95E8437950DCD2C2F9C69F58526C83FD
-:1015C000B6A071158F8FDB9588BC9866CF268AE709
-:1015D000C7BEA744D8A38922FE1DAFCB4F4E6C9C3B
-:1015E0004EE7F826EAE2E25FA488BC651A4B0BCF0F
-:1015F00023AC15F1C6E5B68171E89F2A10E7CA80D1
-:101600006F932AB371F121BDD0B08E459C53D4F8AD
-:1016100070E469FB9D38DFC8D3EC0EF207B471BBF0
-:10162000F3131C2F97DFE37819D531ECE949D03754
-:101630001E3132BF1A5AE7040E2A833087E2A4CB48
-:10164000176C645FC61C9D43F5DE66A781A961EB3C
-:101650008F52A3991AA62FADC3E223FAB2A04F5D11
-:1016600054A41F902FE68971A5458CB73FBEEC08A6
-:10167000FA05F9B6E5E417C48D1B18311E6B532229
-:10168000FC833CE67163DCE802FAE27ED998D34A37
-:10169000841F302EB091CEA18EFB30F2FA8473916C
-:1016A000FD037DD1A52FFCB1DCA7D12FFCA1F873E0
-:1016B000B823F197501E89BF244F24FE521644E2EE
-:1016C00027D51B898FF4E52322EEF75B9317D11FF3
-:1016D000F0C08488E733C18085F7B31E9D16F1FC06
-:1016E000E08DB323FA4337DF16F1FC70FF9288FBDD
-:1016F000D9DB56FE207A8FAC5F1BF1BC9EDE3734FF
-:10170000FE34627C8DDE3EF8FBDFA437730AFF50A7
-:10171000D03B51D859879BD7AD75196D8FE2797C35
-:101720003C3682FACE81E7E963D1FEAB5497E79B62
-:10173000C6685FFB97B24742BD940EA8356451BDA1
-:101740003CD5F5FDDC6088D867B73BB93F6477725C
-:101750003DFE6B133F2F950EFE26D929030BC5D9ED
-:1017600016AC77648299AC8F639C5DE7E818A63A63
-:10177000306F07FDC921BDAAE9D1DBCC6A6D07E84E
-:10178000975132D793A03FFB39619EF7A5078DDCB7
-:10179000FFF019D1FF48B7305F6C1ED919CA433B1F
-:1017A00058A284E700E2427A5CFD0E8875706536C7
-:1017B0009DC37A134140BF5975D17ED3AD9A9E5ACD
-:1017C0003E9CF4D4655BA4FF767969165D3F7BBBD4
-:1017D00099EA07CE8A3A470D0FFAF3D6DA396CED5B
-:1017E000FEF22D9B62D0EF3C2BCEFF6AD7270BFC7D
-:1017F0004D76CAC2FE59D6603E6C1118F138C07BD6
-:10180000E5918ED8DB18F99B9370DD555BAEDCFE5D
-:101810002AF4AB0DC1646E377CF4DEFC77F9B9EEC7
-:10182000F97F8BFCAE408593C7F91562FC5BA0B1D4
-:10183000039E6E013A38B07D635219F2275CA7F31C
-:1018400071338F3023CAF32C6F26D54D9C62AE3393
-:101850007B01C4F94E95E09CCB3C46CC5BBD737BD1
-:10186000650C3ED73D9E360E300CFA25EF3A7CC60D
-:1018700064CC1B4CE67513309F05AF7B16A53F8CDF
-:1018800076499BEF1DE6BD7406E83B9BB9685C6D2D
-:101890007C86E9F9303DB57BF9AA8F1260BEB54769
-:1018A0000D948F58DB6CA678AD6BE57FED780AEE72
-:1018B000DF91DED10FEDF6FB2BFF3604F9E1D6CD3B
-:1018C000325381DEAADD7BA7336C5FE5ECD22B318E
-:1018D000781FECEED6A7D058BE6CA63AE2F757BEFA
-:1018E0003C24DC8FAD74162EC7F7D8B8EB3BEF580D
-:1018F000FCD2F014AAF712FCB442F0D3DA178792A4
-:10190000BFB536A69B9F787F2BAF1BD1D67146F013
-:10191000E3CA97BE89F8CEC46EE023D5CCF7C5D410
-:10192000A160EFDB2EE7D2771F8CDE7F75C2BC2D66
-:10193000573F89C5FE9E37FF4AF0B3B9D7072FCA74
-:10194000A26F4C687F5A3BEFB9A029211FE90E72A4
-:10195000B601C7BFED772F5EFA00F1D3FCF2D69F38
-:10196000E133D779FE7397967714F6C625F001F622
-:1019700086E28B2E16CDCF9308FF46C11DF92CFAB7
-:101980009E874A7CED66C7711FA7B6D5407526B104
-:10199000B8091496AF8B950D9A51725B9CA0AF85D8
-:1019A0009EF97FCEDB2AEAA83E20D21F2A38B43225
-:1019B000C20FF2C05FAF7ED033DE5ACC2FE9FDA15B
-:1019C000F101C36253DCF7F84587A6F5EA174140F9
-:1019D000ED96C688AD21F835E8F4F37E2157F53849
-:1019E00016E6FF03D1FCFC33980EF47B7F9ACAF510
-:1019F000B72D83F1F36952E7300BE8CB16E7A2C7A6
-:101A00001F856B96417CDDD8AFA53335F9C47FDDEA
-:101A10007ED7A111A4B7D8B7301BE243E43DF474DC
-:101A20002BC0F3ECF9617227DE0F1CFE6B2CE67DF8
-:101A300077C4AB6F213D824765DAFF89523A4C8EFD
-:101A40005EE2BB57510F029FCAA9DC1E581A797E6D
-:101A5000D1A2BA19C60F5176FBA8F0737F8D4E1E26
-:101A60004F561E7EBFBF09E871C9D0169B03E3AF76
-:101A7000DEBB3B16DDFF0C93F703E4C35567DF1EA7
-:101A800063A7FCCD96FE180FD607F87730462ACC10
-:101A9000A7E4F584A37A332C2601CFE927503BB283
-:101AA000297F19F2597580AF13C7C642BEE18D1266
-:101AB000F53B1B6BE371BCEADF37A7A13CBD9CC4BF
-:101AC000E3CD97AE66F3F715A6E0F341A74310D335
-:101AD0006FC0F8E46511D7745E95E9396DFE918D9C
-:101AE00085B21DF82127B0F100C5514D6615E91AE0
-:101AF000F51CE378688A22B9AF6E99CAD0EE7739BF
-:101B0000984B82FB3BA2837FA4F36ECD6615F3ADA9
-:101B100051F68D2C1EC6DF21F659870347E179293E
-:101B2000EDBA365F54D3D31873203F50DE374AD90D
-:101B3000C826DBC2F11C437876A4723EDA111D3050
-:101B4000609E253898B16709AE109C8CE6D5E01CE4
-:101B5000EEC7F3843B4CC1F3786E06E0B223FD87F9
-:101B6000330E276B1AAA629E20CAEEA67544D95579
-:101B7000974FEA0957752EF3A35DFFF943AC5B6EEF
-:101B8000518EABA3437D0BC8C08E814CC8F9CF1FCB
-:101B90002FC908EF836219177A7FC8AF363E5E37C8
-:101BA00089E2099F8CF12FB431F1B84E95D6A76028
-:101BB0008A298FE301F7DBAD167EBFFB79E06F1B4F
-:101BC000F66DFC39579CDD3A4D2239E1F5B8421FDC
-:101BD000DC2705CEDF08A4FD2A702057055856BF24
-:101BE000B19FF87495A1E9A99170FFEE28AF2B156C
-:101BF000E67BED43039D6BFDF38B51FE0AC0C7B03E
-:101C00007D5B92DDBDC8877EFC47DE7BE8C974A49E
-:101C1000FF3E49C53C6C973148DF37A96AFACC448E
-:101C2000F50D8D1F53DDD39BA9DE4938CFB8C61AF9
-:101C3000DA8F1ECF36D27E74B6380F5EEFE4FAE349
-:101C4000F2E921CFD684E17F492A972F16F40E407E
-:101C5000B96912F2D9827E0AB47B85BFB4B7F5D6D2
-:101C60002C352C7F58C30EA423BE1F6287A8D5AE87
-:101C700077F9F9B9CAEC772C77B8C3F86F9190F778
-:101C800045A9224F96EA9D8DF0AE6AFDC414ABE2E1
-:101C90003999FAFE6857EAC19FB2F782976EB9D5B3
-:101CA000C951B51234E1F3D517F8F957A0731D9E49
-:101CB0003778F99DC6118BE1FA5EC035D695FACE1C
-:101CC0009AA9BE72AFD1938ECFD79CF93A17F55629
-:101CD000090201F07CDDBC6A00E20DF8BE281AE5BD
-:101CE0006B17233DA6C9670ECA27BC9F837C5F8004
-:101CF000FDE1A4877798DAF9F9D3BDFCFC29F03D22
-:101D0000C901F0BD1DFD861C3BC801BD3F94E47BAD
-:101D100047BB81CEC9FA408F0FA67ED11CECEF687D
-:101D20002FB1937C635E3F0FE5347080C6A987D8DE
-:101D3000044927314FB83FD9E88C25BA69FAF1B088
-:101D400093093BA1C6E17903AB2C47C845983DE414
-:101D50007D612F4FFC2AF0F82FD176B8855D10FEFB
-:101D600014F3E6939EBF57D8AAB5AF4F98B91DD6C6
-:101D7000B9F684DC5D3F8EFE6B40F0C901E1CFA275
-:101D80009D5013783D0E5E1FBD99D7D58E71AF293A
-:101D9000C6B3CFE3CA371EC47682A7BE18CF3E4F64
-:101DA0005AD07E909F81E6E7D91B0EDC948DFBDE36
-:101DB0005D67CD0CF75D1AFE1AFCE34B8087FB5B79
-:101DC00000FFBDD825580EF11F58EC74E6EC79BF22
-:101DD0004BD2F4C7A90AE4C7CE0639D40740AA807B
-:101DE000C1B1FFDBD4938FFBA09F95E67E3E15FD2E
-:101DF000ED742FB55D27FF9A8CB660EF69EE47351D
-:101E000098DCD9C83F0D0323BF1FA0B54FA61A8980
-:101E10000E057D7CBFEB482ACF6F0EF1B1C7908FC6
-:101E2000AA1A64BB1FE87EA941769BC01F3AEFF651
-:101E300026E3D99C0BCC77CB44B4F3228ED4BEF7E7
-:101E40007217FA2960A7EEFE65EFFB0FAB99F65B00
-:101E50006340BE5AD624B1FF001C2C7F26F2F9D570
-:101E6000DAF76A1AB71CC6EF88AD7C4E771FFD15EE
-:101E7000FA0E46A41F732455F827592C0BFD13E0C6
-:101E800023D20F46851D3103DFAE48F7EE437BFCBE
-:101E9000B2F8BE02E85192C77D4E615744FD4170D1
-:101EA00007AF2B1EBECD2F1BE0FD098A5F467BC509
-:101EB000A0C57D87716E6F197D87C9E73E8DFB3E9A
-:101EC000CB853E5CAEF9697EBE3F026637C24FAB42
-:101ED00016AB1FCFFCB5B1B8FE6D12C5CBABB64586
-:101EE000EEA7548BF5AFDE7CF2309ABCCA7ADD7D6A
-:101EF000B1FE6ADDFAB57DF3CF5323EBBFAE773F7A
-:101F0000E42F46EE37BC2DC6D1EE9BD2B87EAC8214
-:101F10006520DD56FB65BF9FFB7936FC5ED09D6278
-:101F20005D770AFAD33AE1B9CA6D923F803CFE78F8
-:101F3000649DE95DF58BCB90AE7A3E5929D6BD7C88
-:101F4000BB91FC55FCFE0FCA9D9E3F568AF5AFD44F
-:101F5000ADBFCA2BE9E0E37E744FF8EA6F413A5710
-:101F60006E37B2DEE0D3E8B552E3EB3EE0D5E0D425
-:101F7000E0FEA1F0F64F13F9AD116C04D1A93CE1DC
-:101F8000BAE8A4F773771D1E41DF5BBB7C6420C5F4
-:101F9000FB1A1FE8DF2F137EF2D4CDDC6FBCD458C0
-:101FA0006C1D89F14C9BC125A9149FC58E04BCE40E
-:101FB00037CBAC02FA5D4D599BF0FB8379270AE6DB
-:101FC00060FC9F7FC240E7EFF61C29A07DE7FCA3E1
-:101FD0008312B228CFEDA2EFE3C038645FBBDAF220
-:101FE00036E1F984AEB692021C5782E7D00FC813CF
-:101FF00076A2A62DCF1A7EFE7C4C1A8FEFD73B3FE0
-:10200000FD39FAE9537719E99CC55463F04DACDB0F
-:10201000DA7344A17DF2D527963C1485F47D51A254
-:102020007DF2C3ED6B1317229F3519EDB8EFDDD5A7
-:10203000F4E30378DFB75DA2EF5E54379766EF8075
-:102040007EDE967C57F8F9B33C874AF0B1542BC535
-:10205000CF53FB19C96E5E4CB3FE16FD9F95EE2D56
-:1020600024DF17F7EF3151DDDE0E89A1293BEC3C6F
-:10207000F80AE2E3E2AB274DE88417379C34757C1D
-:102080008F3F70C92FB300C5CD1B4D18C7546ED1FB
-:10209000FA1D26A49347F84755CF7D4CFD95E8CF10
-:1020A000C37C2B9F91A97EF760F36B26E4E7AAED32
-:1020B000124BC90CBBBF598AF85EC312C6F96089BE
-:1020C000D03FAB987F7D1A3CB76A23AF5B608F46E9
-:1020D000D6016BFCBD42F0F7AAEDB3E8FB533DBE61
-:1020E0005B8871E30DF81CE7EF659B23EFAF107C75
-:1020F000BD42C7D73F4913FA67381B8E7CFD75A1D7
-:102100001A9703D7BF3EB972406FE7ECDB84BDD6A8
-:10211000ECE5E58081EC8DFEB9CEC62B046775DB5E
-:102120006513FAA7654D5F10FE2B9A5AA97EE466E7
-:10213000E65D8DF8BAB9C96A47B9AEE8E07A685A7F
-:1021400093D9EF97F07E3DD53977B5F0BA49DF7E68
-:1021500089FC1C4D8F69DF775C26F0B80C14787A07
-:102160001EFABB3C6EAE1271F28A615B0EE33E7BDF
-:1021700095B8BFFAE8C158F40FA7B12F6E47FAC05F
-:102180007C0CE763CF44E27DBAD08BD3B773BDA894
-:10219000B76B5DA9D933298F09712AC2B57A7B241F
-:1021A000BEAB74F1F963693C3FF6820EDF15416600
-:1021B000CD413854D9E5A7A7DB159CF7482ED85B4D
-:1021C000B4936AD6F77E87F14DE1676BFD99E21C07
-:1021D00078BD7DA32D3C6E8E4AE7FEC2CAF1B20FD8
-:1021E000E9D51D6F0C3A98AB1A42F106C419CD69B6
-:1021F000493CEEC082923732649698188A371E7135
-:102200006EAAC8837EF5762EF79DE3603C3C7FADD9
-:1022100030F247ABB79BE99C6235D09FE28A267EBD
-:102220009EC2D3249522DDC15F3F9A86FBB19852AE
-:102230008575CF6AE47C3FABE40BE297A383F87A21
-:102240002F2B6A4A6FFEBBE6B7E3F93035CC7FAF80
-:102250000239C5E7AB9A783D52C3816FFA67A29EF7
-:102260006BFEAFFE8BA1FD5AD845CD2F0C825F3897
-:1022700090FB45F4BDC9BB857C2DB3F37DBABB850E
-:10228000FD61521DF17995B1FE503CFA593B78BD84
-:1022900000DB871F8503FDF8F64B75F1B0EECE9796
-:1022A00024AA87C3F7F17B949D4BEA3F41BFFBEB28
-:1022B0001D16F237EF06BF654A5E4FB9D4E45BFBEB
-:1022C0006E560D7B88FCCF87581DB595829F3B1BB2
-:1022D0006BE9FBA09ABF42EF0FECE98F540ABEAF47
-:1022E000D4F15F547A24DFD5BC1D4D7E63D751D91C
-:1022F0008EFB3180AFDFA485E345F8210D07A2886E
-:10230000AE5D276D6447FE2CF8EDA2C83FD78C93D5
-:10231000090F86F1BCCD6E796D20D211F18EF5F7E3
-:102320002FB7BC36829FFBF613FE576D9323BE0F6B
-:102330005B591FF9FDD79AB76FA3EF0855EFEF86EA
-:102340006B88293104575F7220493C8E3448917163
-:1023500064F53ED9135E7706EBB903F551BA9007E1
-:10236000A6049331FF35009D0680AFA689D3D5D052
-:10237000CC5B98FF169E2731D2FC3DEE17F956E351
-:10238000FDAF33AD7CFFFAAAAF02FBF70F94A9AE05
-:10239000F3FEB7570E0DD7A30CE104BA561B83C941
-:1023A000146F9E34107CD5272F270FB2A15EDA520E
-:1023B00082DF0F9D2EF4DFE181D6E5C8CF3E9C374A
-:1023C0002534CECB69BC7E8FE17A9DE86DFC928F7F
-:1023D0002BD6FB109B2DE26ACE4F39697CBD108F46
-:1023E0008C4BEF251EB95EBF13ECC3A98512D63303
-:1023F000293E8C87F7BCC7F5424DF3B28F90DFAB17
-:10240000DF37539DD7FD2DCB8652BDAFD77B03FA67
-:102410001B5FB7ACB881F283D24304970FE173A27C
-:102420005F732619EB522B9BCF2493DDDD3B7A9310
-:102430002F06FD97BCE9781DFC09E23FF06B88FF91
-:10244000F6B415687E8C15C7AD3CAA78103F954749
-:102450000B8E57A07F71A2A800D5B974A280FC98FA
-:102460007CF4636C21BFA65B4FA6733FA6AB358A95
-:10247000F20B121BC8F9870D8AE09FD50DAF93BDF3
-:102480005FDD2847D42F6AEFDD99AED038CB34FE1C
-:10249000A997DCC41FBB78BBBA710FAD6F95B19E15
-:1024A000E85DB3DDC8EFEFE0ADF67D581F8BF72197
-:1024B0003E8EE325A0C334933F03F3D3C732B99FC5
-:1024C000AFA7C7E7E93CFF71ECAC7700F2CBB142B4
-:1024D000EF507B2F76C2C78A785C2B097C37F0736C
-:1024E00053FAE73E4B97C4774222CFB76AEDA974FF
-:1024F000AE3FA7997AFF2EE06FD2B57309EC314356
-:102500000146C546FB06E1D7A7867DD761CECD46FD
-:10251000F2174E31FBEB58EF3843D3B3E3B87DD518
-:10252000E7CBE789F73C9B55BE5FA43B3F334F3B6E
-:10253000DFA43BEF364FF83BF374FECED3E9C28FF6
-:102540001FC286A01EAC17E7EFD60E8FF287E7B347
-:10255000F4ED61B12F82E787B0AD19FE2EE57D8ED7
-:10256000B59E7D85EADDCE46B1813CAF47F9EFCA25
-:102570003EF2DF35DD72393782CF34BA5C12DF8349
-:10258000D1D365B7A6AFC4BE5DB4D8B7F31BBDBB8E
-:10259000519E2B2D174DBCEE3068427D56339CFB6F
-:1025A0004D974A25DA6F0738FB9BC3F4FBA5541EF1
-:1025B0007FDD7F8B4479D7567C1EE3AC7A89EABCF9
-:1025C0002B03ED26E4A7210D8B1F26B9F5B1D32CE3
-:1025D000ECBB1A332DDC4E76D34F5B77B71D8BF7F0
-:1025E000717D9C482D3E8F767186B083FA7351437E
-:1025F000597B593AC033DF2DB9B01EA02F3ACF5EB8
-:1026000030EA7544C3F5D2BB33DDFB4E3ACA79FBE1
-:10261000E55B308F7A6CF867FDD18E56F5C1C71F28
-:102620000B3CEBBF2BE31AAAD6E2F7556A9DDE0EF0
-:10263000D29F866F6347301CA7E3376B25A4132313
-:10264000FEEF4B7E3E13E37E96CEBF770FB8A77D9D
-:102650009755E9BC4EEB98D19F41798A9CEBDBF70B
-:10266000AAD9F7462EEAB3CED6A3B9A630BA5E5C95
-:102670000B7A00ED4AF3C164D516CE7706E23749EE
-:10268000D2F84F11F632920F2F221FE6607B26768A
-:1026900010EAE35DA76207E3787B79DBCDAF4DFC01
-:1026A0007BF6101F0D9917130EDFC304DFA57A3ECA
-:1026B0000E631D43E68C0CBF5FDB171F5B33888FF7
-:1026C0003B22F8585B6F3D7ECF07E38016337DCF0A
-:1026D00007F3D78E3039199AC1F5CF58F1FD9EF125
-:1026E000CC47DF391C2BBEE3335E6101251EF7CDDD
-:1026F0000232DFF7E5E72DC6087E1EAB045AB18E25
-:1027000062BCD8E799C0DAE9B9292C48AD9BD9E970
-:102710001C451173513BCE12988EEE544E7D3DD523
-:1027200025069215C7798B38AFD10BDD42EB57E800
-:10273000BB3DC49F329ED7E9FDBB2FB333B8DCD37A
-:10274000C74590BE9718E5B9F07B6D38C9448595AB
-:10275000637DD3648559A201DE5D870C24CF2D1DD6
-:10276000AA1FEB535D09E2BDCF19D5E18E757379D0
-:10277000459383F518DA7AF5789800E3619E6DAC9D
-:10278000029128E13140F3DDC8F8399242A652FDAA
-:10279000736946A6D0F7418AA38A218E427D6FB025
-:1027A000F8081FD33354BA8FFB25B130CE848D1275
-:1027B0007B0FF73FB2F87AB5F1270023E0F9C2E9C1
-:1027C00019DC9E614AF5BD78BE8F124B05CD25768A
-:1027D000FE9DA364FACED1F5E2B52B997FEF32F6D8
-:1027E000CE60E7CF0A42FB492EFCEE516CE83B9BE2
-:1027F0002EEDDF830844FE7B1077642CF911F2A3E1
-:1028000056AFC7BCFCDF7DD0D7EB85D5E7B10B61F8
-:10281000E7B0B5BA926DFED92A9EF35B9068A173BA
-:10282000BF7996FEF968C7063ABD34FEFBD2F6C101
-:102830003498E21FED8909F1BB95B9C721BE4375F4
-:1028400083FC3B50DDE7AE92199D57B49A797DE544
-:1028500063201FF81D26902E15EB68D883C5548F72
-:10286000B9DE6171E1790933C26D0DC15D6B11DFB4
-:1028700005B5F07D717D3D68ADCD40DF1DAD65D105
-:10288000740E3D29DABB2E03E0BA2FA688CE7767F7
-:10289000EF9CE444BF317CFD93B4F51B7AD647C26C
-:1028A0007A1FC9E8A51E515BA7F6EF76D805FEB4DE
-:1028B00075DBB5734A6E25E29C92868FC7A2F9BA82
-:1028C0008DB8F39F45EFAAA837F4EBFDFFDC29BCD8
-:1028D00016A06400000000000000000000000000DE
-:1028E0001F8B080000000000000BD3D76660F85172
-:1028F0008FC02E9A0C0C5DD2A862B4C41D120C0CB1
-:102900009780F80B106702EDF5926460F006E26DB7
-:1029100040BC1D88C5A518180280381088FB80FCB3
-:102920007E204E07E224A81BB30519187281381FB8
-:10293000880B815848808141588078FBCB15191845
-:102940005EAB22F85A6A0C0CC91AF4F3FF60C38E0E
-:10295000B6F4B5EF14D0BEE56E08BE0490BDC20D4E
-:1029600055CD4A37FC66AC42935F8DC65F83477F87
-:10297000A20D2A7F99292A7F9D3903C3432435CB91
-:102980004DF1BB051D0B02FD2784274C9730A2F2A9
-:102990002732A1F2F9A17C00BA0B8074A8030000D1
-:1029A00000000000000000001F8B08000000000075
-:1029B000000BED7D0D7854D599F0B93F73672699DA
-:1029C00099DC24433260126E7ED0A001879860B0FB
-:1029D000586E20E147A30E082CB440262888166DB7
-:1029E000C49FC6DD500609BF0921E14F70D11D10FB
-:1029F0005DEA63FBC5565B75BB7682D646AB356830
-:102A0000D787767765A015BFBA761BD96D976EBB51
-:102A1000F57BDFF79CCBCCBD9900FEECB7BBDFF3B9
-:102A2000C5C7E770EE3D3FEF79CFFB7FDE73C7C5CB
-:102A300046B1E058C63EC6BF698C4DCC658CD5A664
-:102A4000CA160F8B65E73096DB213156C3D8CA769C
-:102A5000253E0BFE59D8D1F20AD697B7B90D772982
-:102A600063FD0FB8FD35503FBD5D09BBA16BA3E20F
-:102A7000A3FAB22E57D86DC0F3AD1FBD9C8FEF37B0
-:102A80004A610675C6EE666C32636B3CF04FA82F48
-:102A9000AB4876E0FB77B748E118BE66A66F12BC7C
-:102AA000BF95F1F7CD0F281A93A1BEEFB626369148
-:102AB000B15B7A60160F35641FF3F68C153016E1A2
-:102AC0008F58CB16785F997A1F615D1F29D0AF3977
-:102AD000E678BE6FD6FB2C80EFB5D47358CF31FCAF
-:102AE000C714C62E65FEE0E96CF87798853F56A0BE
-:102AF0006CC8676C740A5FCE9231807E1463731960
-:102B000073B17218A7F632172B83F559786CE378F6
-:102B10005CD624111E97F918D5DF9D2BC51F2CA557
-:102B20007E6C7A3594F0BC200FCA20330BA18C78D0
-:102B300058221BE09FDB76D97BB8FE0D38D5686A3A
-:102B40009F08C0FB052CEA6200DF9FB118958B59E6
-:102B50009CCA2FB304C1B1940D95A850BF4B496CCA
-:102B600062304F38149D8EFBFBBBFA63EF4AF0FED8
-:102B7000FE6AA9760A94CC9747EBBED0FAACF95519
-:102B800016B90EC7614C7645FC8C8DB7D67998C5C1
-:102B90002A828CE93D3E4E2F87593F83FAF8064141
-:102BA0002F8DEFCB215877CFF32C8CF5106CE614DA
-:102BB000A887BAB2E21BA0DEF378AC1EF172AC05B6
-:102BC000300FFD8F35BAA56815942EDD158132A41E
-:102BD00032A6009EEA1BD64B0AB49B1BE5E38C375A
-:102BE00035995D09F5C3314915CFB1BFAEC7241D75
-:102BF000EAE3A1FEA084EF751783711A1A725DC90A
-:102C00002AC477CF181DCA8AC35A4206FCD69B3AFB
-:102C10003D676C11D1D578416B734DDE6FEEE13CB1
-:102C20003FA3F7EC4F1F5BEF01BF9714F17D3B769D
-:102C3000B82C07E165517BFF2295C53C79293CEF13
-:102C40005C072FDC29FCEE3A5CB615F176AC4F0D33
-:102C50000B52B68D0FE3F636C0FB335572583190E8
-:102C6000CF8A38FC15BA5FF7A5C6D9B90EDA5F96D8
-:102C700082A35199DA4FF83019F1E3DC1A685F95B5
-:102C80006AFF04B60738F6203CD46FCD512FCE131F
-:102C90006134CF48F4F0C23A9DFA0D8A755CF3BFF7
-:102CA000C3B44F731B5A243EAF80AFC10E9F555A19
-:102CB000F08D34FE31019735BE35DF13EB425436CB
-:102CC0002A558FDC8BEB3AA2F175CD371EDF8DF8DC
-:102CD0003BE209C7A0FEE4757F33E65E18E28AE9AD
-:102CE000CF5FFE0CC3F9963F7C3BAEEBB92C5AD7B5
-:102CF000531F9E79ED46367CDEB7041E7E7A6EFE4B
-:102D000010D5ADF9E79AD21809E8ACD294122EA0EA
-:102D10009763F55F79F85E03EBFD26CA934AF39853
-:102D20002941391186A1FD66EA9F3E06795609DDE3
-:102D3000911F2735482DD8EE891B1FFAD27DF0E868
-:102D4000A72E0EF7157FC9E1BEECFAB54F22BC974E
-:102D5000DDB8F6E7CF40FD0A1482C07797DEB47F76
-:102D6000CDDFC13FBFB1F02F97EF61241762D900CB
-:102D700047AE2931DCDF65DF77DBE4CAB1E7FD244C
-:102D8000570ACDD218F2DFB23E89E4737FA39B05C8
-:102D9000F1FDCFDC7137F2D7039249ED9F75C75132
-:102DA0003E1C733186F278D9716F1CF985AD5A4695
-:102DB000F23A62C96B337FE9BD30DEBB0D963CE76A
-:102DC000744AEF617DEF9ABFD87E35F43F63BAC293
-:102DD00028362D79E1C4F3BB02BF91FA72A2836554
-:102DE0006AD215CE400FCD6D8A4D6ED7379C24BA6E
-:102DF0005A06254BE3D3B982CF9635FC42F0A74E55
-:102E000072C909CF1BB585C599E8EE94802729E8DA
-:102E1000ED5DDCEFCB103EE88574D3A5C495343965
-:102E20000D7FAEC804AAC790A56FD96287D392DB85
-:102E30002DB16C9BBE02F9FB2F28379BDBF26DCFC7
-:102E4000E7E6B0DAA99F4E0EFF81E4705222784087
-:102E5000FFD2FE47E2521CE5A2B53F7788FD8954B8
-:102E6000305ACFAF0E48F118ECEFAF8E88F5ED93E6
-:102E7000E28A44F46A9EF6E0B83067796AFF6F1719
-:102E8000FB9FDA3F8E1F0B5F293D97BB290920B4BA
-:102E9000F8222528AF2DFEB1F0DBBFE74725B87F2C
-:102EA000856DA5DD7508E70185F8F7C3FA93C5B808
-:102EB0006FEFBA00AFD03F72F8B100F3A5E06F1129
-:102EC00072F0830EA017782E219C9569700AB85D68
-:102ED000588776B737487DC8A7BF14F35AFD7EB42C
-:102EE00065C64CC4CF1D3D1243FCDC7EA477D99F40
-:102EF000C3FA57C7B3C338C5AF1A8B0397003C2B2F
-:102F00007AECFB796ACBCD01A49B0FFBF20B709C92
-:102F1000DBA72634847375E255CD003A9B65F66ACB
-:102F2000C90C74F561DF8600B6FF50EDB9F11A9C4B
-:102F3000679F125E0FE3AF3E523AD3E4744AF4BB8C
-:102F40005AE0F7A4DA33730CC0D7F28D729207EF10
-:102F5000F529B3E319E4E7D72585E860759B5BC6DF
-:102F6000758E442F1F76B85802E7511384CF91DA3B
-:102F70007DD0D742EFFB1F28BC01EDB7DBDB5D2422
-:102F80002F6E6F73133DAD6E90E24C4AF1DB0A0178
-:102F9000EFEADD0ABD3F694A243FACFDBA5DD0DBF4
-:102FA000C9C357BD82FAFE0CC81F94BB3336FE500E
-:102FB000BB04F0B0620B97472777E72EBD07E58883
-:102FC000D0977788716F8B2B36FE58D99E6DDB8F2B
-:102FD0006857BEAD7EFA48FE8D7548D75D0AE9CFC9
-:102FE0005B363EA685483ED9ED4DE4B0490529FB48
-:102FF000F2041B5A708D94A2278B7E6E6D037B3377
-:1030000030DCDE6C3922913D7AD176661BD899137B
-:1030100087DB99961C89A07D569E922396DCB84B3F
-:10302000898E0D021CBF76452FCB2F27B9F1805416
-:103030008B74A2FF16ED4A16536A51BE5DACBCA05C
-:10304000C55A7C047FEF75005D65A0D719485730DD
-:10305000CFCC9EFE8CF43C433268BC14DDDC1220E5
-:10306000BEC541018E668FD985705E02137BABA908
-:10307000644A1E2F55A86F4698811E4EAD95E28773
-:103080004A793B1FCA5380EB1A78DEDC75797C9B4A
-:10309000847621FCA1FE6CE37637B433FD79F4DC51
-:1030A00094A02C6A2F7D19F7E71210005A356F8F04
-:1030B000F3809D452881F6097735758D05A02C860E
-:1030C0007E32EF4FEFB15D80E4789CD68BE3E3383E
-:1030D000154A7C0DCA198B8E9709B90372B5520532
-:1030E000FA6A665961D49BCD6DE5E7B55F6E08DB82
-:1030F000E5C74D75763D30D7B4CBFF9B675F626BFC
-:10310000BF20526E7BFF678BAEB0BD5F1CBDCA5641
-:10311000FFF2AA2FD8DA2F6D9D61F7937E9A4BEBC1
-:103120005923F87224B85F17F2F2270EFBD42A9BBA
-:10313000AE4FD4BC0DFBC4D6B9C38F4371620E5BD6
-:10314000D49726577CB244F8FC0DB009F70FFEF473
-:1031500031E131C4E76DFA0B776B26BAD3443F34C3
-:1031600097D05E72B63FB118E649EBF76F924474A0
-:1031700078AE1FF3F4FC12406E014ECE01D4DFC9CD
-:103180009225B86FEE5C83DEDF25270BB0FE1B3681
-:10319000B4371FF7D7972C46FE6956D973520EF6EF
-:1031A0000B7BDC301F5843AC0DE8A3A5ED47C7D11E
-:1031B0008E938C205B82758F2F81FCCD3A5C1F260D
-:1031C0002DBC031FF686A21F4A0087D4DEFF7B09B1
-:1031D000DF7F9F19A88759B22817FD479C2A9D0FAA
-:1031E0009B66B056C4D789463BDEBC621D3F9764E0
-:1031F0006AF71C337F8B7C7452D2F9FA04BCDB244F
-:10320000F32CCE67C1FD6EAEAEB14F07B722D72209
-:10321000DC3F22B837B4B264B63232DC5730D32D3B
-:103220008F1A0ECF596666657A3E0BD835D3F3CB2D
-:10323000DDAC12EDD5135256787D299643FFF83553
-:10324000E0ABD8377CE1C78DE1743155CEA5F99B51
-:1032500085BD5BD82E25B2D13E651EB25F59CF43E6
-:10326000A607E59A10712D6DD2495C3FEB68349347
-:103270009ED47A9921B1F476E7F6BDCD4DED2D7946
-:1032800063C92D0B9F965CB1E4978557E7F823C976
-:10329000191C4FCD43F8A393E4743AD1011F1310C6
-:1032A0001EB31AF7CFDA377023639EEA91F7CD92F7
-:1032B00053D08EA1FF3FD27E019EC8AE738519E127
-:1032C000E9DDE0D0D2A760DD036D5C5FBF5BC4C801
-:1032D0003E3CD376D5400EE2C7E3A940FC14F2A9E8
-:1032E000586170681DCA579F9AE847B80A85FEF270
-:1032F00032AEBF0A99B1E36AF4EFDB4F2EC176D646
-:10330000FEE48AFD6986FD417FA4D937548C76920C
-:103310001BF51AB47383DC45B95CD8FEFE7FA05E52
-:103320002C74E8458484A5C39155B5E36A237DFCDC
-:103330008F36A27D698D4B1DD2F73FA89D44FC16A8
-:10334000B66FBE5B09D8C6973E463C08B98D66D7B6
-:10335000B9794AD15E9513EE408A2E9C7059FD468C
-:10336000A213963E4FB9AD4EF684B3EE0E6B36F90E
-:10337000FCEE1FCB735A7DE7A137E7784EFA76F261
-:1033800081C0C3A7A0D34D9C4EB95CB0F8F63F8B6B
-:103390004EA3D6BEC672EF3882FAB54B0BCF32D0F1
-:1033A0004E18FA21B713DCC621A4B398945509EF3F
-:1033B000A31D2AD98D965DD1BFF6AFB794C1F31383
-:1033C000B532F91127D673BADFF300B7472DBD1D0B
-:1033D000157A1BED02C42BD80D036E5E7A701CFFAC
-:1033E000FA9B4B2580DB630CF5BBB17D9B41F66AF4
-:1033F0004E5D5C6F84325E71C833CE48C9A5642CC3
-:103400003F6F39ECD7B7728D6511B2AFA3A3E7FA5E
-:1034100053EF7F2C73FD34AD84E5CD86F1925BE5EF
-:10342000F083D03FE9B2EB31AB5CA3707D99F4B28D
-:1034300012F483476A37A4587A55D7685FE60F1CA1
-:10344000C77D1A691F6007748A639EA3438E7798AD
-:1034500087C64FFAED7AE8A4D04316FC9F40AF2E02
-:103460002C06FAD82B6586FB23315EF4390000F672
-:103470003BAA3233533BE7BAFF41F44BC82ACDB7DE
-:10348000A362E76CDCEF584C09A7EF8755FE85C2B5
-:10349000F567CEDC86DC4668C7D6676E9727DA3DCF
-:1034A000765FD622F4AF00752AC66B42317DDE6CA2
-:1034B0008C474ECD9B843EF68F51FFC0BCBB23672B
-:1034C000F416DF27C247414819191F6FCA32DF4778
-:1034D00007DFEE01770DE56752F250FCA525E6CE39
-:1034E000C8C7969C72CA23A79E934C93B5550F9755
-:1034F0002BD6B89F549F817CC85246A5ECF673FA30
-:10350000EC62E97104395022B3685F06FFF46A8502
-:10351000E3A93FC6E314AA2993DE9AA9343109F03E
-:10352000B421C8481EE4E15E23DF36B038A080E550
-:10353000B3F0800FE549506609F25B9D7EA0D98407
-:103540007E609083C6F45165FD85F03C387F259DF3
-:1035500033B00897B73AFCC7F9C8247DE116788DD7
-:10356000C626519C33AFC92EC7DDE807827CD41B29
-:103570001CCFE7CFA4F306374B7B0EEBB84AF1071D
-:103580004F8369CFAA590DF267F5FEAB762D86F110
-:103590006B1EB9F96D2C271FBC27FF4B50D63DBEC3
-:1035A000EB662C4B5E8B8ECD144FB54AE01426D7BC
-:1035B000017C3E66B873466E67AC57226857C33EBF
-:1035C00076203D2463E55948DFAB14CEFFFD0BB4F4
-:1035D00000C667D42D5CAEAAF3017944FFDC4F6FBF
-:1035E0004EF9D3E457A8C24F52DA158A2324F53294
-:1035F0008AB71CDA226B58829C8DE13CD6FCBD2236
-:103600004EDD29E2AD4EF87A4B868A510E9E58FF68
-:1036100011D9878A9E159E0DF375F95909C121E2CA
-:1036200005CD62FF926BEB3DE9F12245F8391D476C
-:10363000E70C184807034AD86B10DF68386E74CB64
-:103640007486F197597A98A13DD129FC1EC567323D
-:10365000DCD76C9DCD44BF165E6921EC5FC5C20905
-:10366000ECDFDE8FB885F59AB7231FFCE05A6E8732
-:103670009C28B5CB6D20A12ED85336AB68BD8AB43B
-:10368000D9149C7415D2FCEF9502215739BDBE5157
-:103690003BE5B16D4007CFB9CD7B94519F808F1C26
-:1036A00072FD07C026B86F8F4A76796E95079D7CAC
-:1036B000D426915DA89A7C9D33950F1B514F6E04C3
-:1036C000BBB1D018CE2F1B5F6764376E04FE8B959D
-:1036D00066E29F6A0965C4C5F24F5E7BAE84718C59
-:1036E000CFCA3F7FA988733AC13F406709B4631EC0
-:1036F000958CCE29B0BEEFEC6BFCF11478FDEC811B
-:1037000015D9D740F9BDF8C6EBAF81F96F7F7C4F73
-:1037100036EEF3A3AF023F9DC78FB7F8A9196DD856
-:10372000F3C4D98CB5767E32D657103FBDA570FD57
-:10373000D5BFE0776F5CFDFFF9E97CFCF4B602F4DD
-:1037400039ED4F678BA3E7916FCD454C437B0BDA87
-:103750009848E7D1A0BDF4A95984EF752E2EC7FC77
-:103760002E2FB73B42FCBD73BCBF513F79FC60417B
-:10377000F967E7D3753EF3A3CF83DF41EE90BC3901
-:1037800031CECEF79D2E4E77BF727DE2F5BDF3852B
-:10379000CF617D60D7937D779DCA0CF40326BEE090
-:1037A0002161F1EAB88D479025A6C1F3501E7FEF45
-:1037B000CE237919473B6648A9A4FE26E3767C53BD
-:1037C000CDE623FC5C62B06211F8CB73E05F688FDA
-:1037D0005CE7E37E058CC34230FE6A6FB4581D453A
-:1037E000E3917FF9EAF3FB82285F5EF79825F89C66
-:1037F00025D55C3C1FB0EC8E91F95D65A7D3FCAC80
-:10380000A73546709CBA54A378258AB100D4B796E0
-:103810005E4A714A168E1D97B03E4A6728C795606A
-:103820006431D9216D6E6316D4B78201150B12DD98
-:1038300092DC54DA7B430194036097E07B3536D702
-:10384000A3A1FF324AC6203473B77D447EF7896254
-:103850002E6F3BA6303AA71978E0DF96CA68EFB41E
-:10386000BBE9DC02EC46E2D7A8901BC9E0F4500BA0
-:10387000FA19455A5882FAA6D82F8E7F8DCB13D3CA
-:1038800033393D3EC2E31D2D21EEEF3AEDBECD5F53
-:10389000BFEC4D03C7FBE16B5D9743F9FA933F7FA4
-:1038A000FD7278F7C6B75EABC1B8B7BB4EB3C51DE6
-:1038B000DDCC7813ED2DF099121ACAE7D8C925B8D6
-:1038C0009929BF4E8A217EA235FE38AE17791BF1A9
-:1038D000939CA2F0F345F80B017C01015F77F05453
-:1038E00015CD137BFF3F32C97BFA9B2CF408B4DB68
-:1038F0009C777F1CE5486ABE49249FA2209FD08FF9
-:103900008CFA7A96ACA1F9FCE107B1CF1F61572779
-:10391000A7CE0B0F6D99D782789EBBC0A3239DB90C
-:10392000639BEF463A77AEF38CEFC14B3134679B24
-:103930001FF8C45DA1995EB27FD961DA0FD1C4824C
-:103940005B0705827107E8BF6C05CBD0DF80FEB84E
-:103950004E9067686F5BFD808C4D5CEF19DFF44B18
-:1039600029DE2FE21556BF9B62129D13DC540E6CAC
-:10397000503E1C4F1B7CF24FBE86E72E3145573818
-:103980001D842AD2F0867FF6B819A78BCBF6D9F51D
-:103990002ECCBFB014DFC714A21727BF8C8FDBDB80
-:1039A0006FF09DFF5C7FF87E723C4F14FC66F5B7AC
-:1039B000E02378A54CF175FBB9CC4D75F6FADC61C6
-:1039C000F8383F5CD355FBB94D83CF3EDECCA0FD2C
-:1039D000FDEC227B7D03C66F3EC9BA1D7CF7F4184F
-:1039E000F33BEA67F0EB2DB9FBBE27F2B7348E1A32
-:1039F00066384EFF82BDF3E7011D14EADCEE289C19
-:103A0000BFB021B706E51413792699ED8F42A1EFD7
-:103A100095F697941CF4474DDE3EB9E4AD1939781C
-:103A20005E5CC7E83C3DAADE13CB3152F648BF5A74
-:103A30009E8578FEFCED91BBBDE97937297BE48159
-:103A4000578D9A0CF6887A8F64C238B396803D52AF
-:103A5000956E8FB44A2883B297803D427647F43DF5
-:103A6000C4D74876C98F2DFBDE9FD9AEFE83CAF539
-:103A70002CE8997FFA2C7A669CD7FC17F573B0076F
-:103A8000A695182B2319E8F00395C73B2CFDD918F0
-:103A90004C2878760E7A5375C1F36BEB922FA138D0
-:103AA000EED0770671DDB01E97ABF6D3AFE78CCAC8
-:103AB000E199A8F23C9891FA7D6B047FC5AB7985BA
-:103AC000DD62DFEFFE05EFE832FA2FE0C7A0FF92DC
-:103AD000F4956DC3B8E099984AF13A75FECADD7362
-:103AE000919EC0CEE6F47C7EFBFADA21D9C6C7D31C
-:103AF000CE66D9F8BE9ED9CFE96678ECE7748DBA68
-:103B0000FD9C6E56C87E4E37C7B09FD35D5F693F40
-:103B1000A773DAF73347BBFE7BDAF7A14646FC749E
-:103B200001FB1EF8E926A4A791F8E9BA7CE3FE4858
-:103B300086FDAED6B89DBADA1B59807437CDE076D3
-:103B40005D34B69EF201F3A2206F4A296E48712FB0
-:103B50002BAE65C5BDACBC402B9EE58C5F59712F6B
-:103B60002B8E25C578DCAAD9135D81F036B79F94DA
-:103B7000518EE8CFC13CC808D639DEB0F81C970793
-:103B80002DED99E372CEF8DB88ED3E255F7D0EFAD0
-:103B9000613DAED7D20FC0E70F7E163E07B9B50D17
-:103BA000C7FB17E4F751244FBA69FF2A00D768A76B
-:103BB000C33E6818A75F707A3FC6E3D4E36EE2DBCA
-:103BC0008BF57F31D141864D8B820F8EF1AC68AC85
-:103BD00094F48BC537169F38FDE361FCF15FCD3F50
-:103BE00017E91F03FF7CCF751E7D04FCF13CE27BCF
-:103BF0005A25C7AF931F2CFA07924848D5B8DFD192
-:103C000004B6B7E89DBD183611CE89C2AF39315A16
-:103C100023FFE2C4F3FFCECF619FF784C78935E26B
-:103C2000FB89DD05F16DA5293EB3F8A9DD13FDB1D2
-:103C30002B2D0FC4CA773CEC315FC7E721B52F812C
-:103C4000FE4A68360B6F3088CF8EF1E79C4F7D615E
-:103C500046F1D3CFEC97ED75C5F17CA8451A5ACA49
-:103C6000C86F651AF2AD2AE4C98B59D19388CFE6A3
-:103C7000E991124E4F43E37C00D72F3A14F2D73E1E
-:103C80002B3F358F84FF73F8880EB96A87E707A446
-:103C9000CB2D946FA19016DF20659057025F7116AF
-:103CA0001E83EB83FDFC77C4635E15936839828FB6
-:103CB0009B3DE61F5C9FCDFE50B4DA141F03DE3C33
-:103CC0001ACAC56AC05BF970BC9D74F1F53BE92F57
-:103CD000A42665A4FF10C8D10D52DA39A9C08BB54E
-:103CE0009E91E4B345A769E70D212D7DBDFF8FCAE5
-:103CF000654B5E5EEE894EC67D709B1121FF4CDAEE
-:103D00005FA79C196E07C974CE7806EC1EEC76B1DD
-:103D1000F275DA592F1E96B0A967152AAF3D4B8769
-:103D200027EC8B67B3A934CFE653597F3697CAE99E
-:103D3000672FA172C6D9D154369C0560C0C4693CB6
-:103D40005B4AE5CCB3575039EBEC782A679FBD8AC4
-:103D5000DACD393B89CAEBCE7E81CAEBCF4EA1D2F8
-:103D600069FF18EB5592DF96FCB2E4BB537E5BF221
-:103D7000EFFF9AFC8E355C94FD03FAEFABDA79E441
-:103D8000F748F202F8FA3E2D5D4EA4F4F3FDDA672F
-:103D9000E0EBE3824F817FDFC3388C07BC388A5366
-:103DA00085799C2A606806E669ECC326B0A5FED238
-:103DB000C8498C1B342FF0E831807BA05423F9B420
-:103DC0002DA8D1B9DB66491FCDE5413281F4B73367
-:103DD000A4D178DBFEA878317FE1A55105019CA72D
-:103DE000DB2FEBD8FE5BB9C97DB7E039FE14163E78
-:103DF00004E3ADD8B3C793EE87EF47E300E00BC40D
-:103E00009E660CF87AE3A8DF2DC5F97C5319C563CB
-:103E1000A03433E58B7DD32DCEA7D5A110E269ABBD
-:103E20004F267DD0AD7B441E6A72A005FDDC3A9919
-:103E30006D8379378C7E670B82AD8E2BDB5106F557
-:103E40009D75655EDCA4A75FF92044F604BC435071
-:103E5000A04C88D2CC81FDE9F4868DF39DB729C6AC
-:103E6000D03A2456ECEFAE1EB9DD26FF4008E9A398
-:103E700063D2E4CA5B60FEDE4905A371FEED3547FF
-:103E80006DF850747B3C45C18023FAE175498AABDB
-:103E90006D908D1D65B0BE80C8B706302B23697943
-:103EA00007161C4A18D6C1E14A287C3DAC009EE7A3
-:103EB000D6256249BE5E13E3AE3E5F3284FEA25257
-:103EC000779AE26D9DFEE422AA3BE0B0C6FFAD66A4
-:103ED000E50570BEF109BE699EF4ED4594475EA507
-:103EE000D1BE75BB8616603DB6D6C51ECF10BFD9F4
-:103EF00020F8795BE5F9E332AACF0E47B7D7EE2F6A
-:103F00005AF0BC2F4A271CCDAEA15199F6EFD3CE63
-:103F10007FA1757FDEF3758E903F70B9DBBE0F0118
-:103F200021CF9BA77C3B84E7E2163C9D12EC43CD5E
-:103F3000E7BF0FCD53B8BCFEBCD7FB3F6DDCDF6BDA
-:103F40003CAE027C3ABB1CE38C632687305EEBB34D
-:103F5000E2D1E138E52705301E4DBD0CD243AACE93
-:103F6000C7505496403E94B33F4CE03E29D59AA1A9
-:103F7000909CCDBCEF4A7813E5B539F9D3829BFE0E
-:103F8000260BD381CE0FBD567CDA5027F3FB1218D7
-:103F9000FF5598753ECBE3D3567FB542A6783405DE
-:103FA000B2D3C651410FE3398E8271EABCE1F37F8F
-:103FB00037458FF6F98B787C5C51B91FF89EC4F1B8
-:103FC000117B55A17CCFAEE7B97C63C719C9EFAEB1
-:103FD0005A83CE5576C0FFE83FC46A7D71A45BC5A5
-:103FE000918F77A6727A08E5A81517A7F9F8F90056
-:103FF000C5B9314F91E2E606ABC0F7DD02346B1C68
-:10400000D58ACB57AE9984EDFC06F33C07EBF3D78A
-:10401000B1C425006FD0DDBAF5F2D20CF1F0CA358B
-:10402000DF7812E6DDFDD4F45F3D09F55D72F8D569
-:104030003A6897FFE53AC2AB331EBEAD523675946F
-:104040000F3EDF21DC57B0A1892E6EED9162F83C66
-:10405000DBE73BC8F7BB35A4205E404F225EBCCEF9
-:10406000BCC8747C97211C3B07E6C1BFBD5BE72D34
-:10407000C379116ECCAF5CD15BAFA19E092EB19F0D
-:104080005FF89BEC756F951DCEAD62FF2E44FFCEA1
-:104090003CC41E73DE22A4DB33418DA1BCD9B8F62B
-:1040A000EA1B49EE6F57D8B8D20CF4EB5857A7E685
-:1040B00022FDDF6DD4EFAD40BDD1A0515E4F77DC66
-:1040C0001BC714EFED75A973139BFD6E68FC1CAB49
-:1040D000464EB833D9F1E27C2C209E31C73958F7CF
-:1040E0006C99EC9AEE1E3E8F355E77DD5B1E941365
-:1040F000238DFBF418F3881BEDA968DE45DDBBB802
-:104100006FA38BD3F5142D2E95A23DAA2F5C04F539
-:10411000CDE364B28798F0FFBAAFE5E7890F6B860D
-:10412000ED7EC5A6292BC96EB8C9AD0BFE02BB70CA
-:1041300042EABEC501AFF9821B9EABCFC148600FFA
-:10414000BC971BBE11E9A231F811D951B716C93A73
-:10415000D2D78A3D8DB4AECDBACC1268F7AAAD6481
-:10416000A436B15613CF03305113E96E0EBC91E95A
-:104170005E44F25027C039675CE1A46D507317B5F7
-:10418000521E4BA321911F761D6006E5414B7144E1
-:1041900095AAB0DFFC77D0EE9B132C95D1DFBF4EF4
-:1041A000650D5A9A7D0E76F13177DABA4E8CDB13B3
-:1041B00094AB707E9807E75FE4A1FB046EB48FAF09
-:1041C0004CD9C71311916976F2AFD1A8C478465182
-:1041D000E2F794E7FDFDA48CF3B21758F536E993A6
-:1041E000FBD5E05FFE12F733CE8C7E4C35FCAC7114
-:1041F00089AF6B629FC4BD95C39EC86F707C2B1E38
-:104200003051E3F79B37B7B0702C2DAEB2F9F93FC0
-:104210003F8EF6AA157F39977727E0B4E0DE24B108
-:104220002CD2F39EE81FDCE97E314B96CD9DF0F950
-:10423000C19D215FCE570BFC3456F04F5E6D851744
-:10424000E5E658CCF7C17D68E7F2C484FFD2F37D80
-:1042500014C17CC1706BBF6C0C974B8AB837057466
-:104260002DA11DEBCC075230EF67E270B97140D041
-:10427000FF251E91FF33994DE67EB8FDFCCABF9421
-:10428000EB7DD69A97F11EEAF785DE7F51F8950906
-:1042900071AFF1A8B8B7F8F23A83FCBC57D65552C3
-:1042A00039B02E4CCF5F5B574765EA7E159F375F6D
-:1042B000D8612A06D5F09CDFC7E206C0EB1FB566C1
-:1042C000A014F9BC8EDFEFEE6E3AB5A59CEC467EED
-:1042D0006EB1B9A83A5188FE0BC09A0F7597AFCF4F
-:1042E000C3EF79998395055CCD21DEFFABCF2B9C85
-:1042F00074A15BFBEFD86F1F6B6528EF02A67DBF33
-:10430000B3C34EFF86EFBFABE8E2F6BD17FF01FB7C
-:10431000F8256BDFAF6657F3EF335C9C3C463EAA53
-:104320001472600CF0D301F0E7DD0ACF57CFE779C4
-:10433000AE6688F39BA9F27A6CBC68EFE224C406EF
-:10434000F2785E7B313F4FA07E98578EEF312CF98B
-:10435000028F6FB11C91FF3E568CB35A8C3BB19AC1
-:10436000EEEDF2F37FD6A763E96349AAE7021F6087
-:104370001964AD1222730C1B247FBB581AA2BA21F8
-:10438000E959582F93C265DC0F8F93FE2C57CC6FE1
-:104390005710F223328F172517933D097A19E562DA
-:1043A0005C8D2C42F9B2A14D0B0326CEE5C9E1FD8F
-:1043B000392C37F4D50CE0F9472C2693FC519E6339
-:1043C00059FA9564EF91FEDAB03EEF6036E56B2462
-:1043D00029CF7DBFA7D4A6A726FA165EA7C37E6DF8
-:1043E00014F9742EE8CF32E49F5AF974306E49A65E
-:1043F000F756B9D1AF2DCAE4F73FEC91443C2339CD
-:104400009AE280625FE353E58CF719F779B85DF3C0
-:104410006869667B9AB10769BCFD1EDD316EB285A5
-:10442000EECFE83CBE91E53229BF66631BBFA76FA4
-:10443000E16F34D8B5680F6FEC9B3F1BF93B56A971
-:1044400052BE39ACDF87F87389BCE48DE38307B3D0
-:10445000795CA214E5743FE2AF360D7FC1954D88BB
-:10446000BF8E57797E2FE8731FCB906F68E1CFE541
-:10447000635FCCF4DE2A3B46698B32DD1B3EEAB13A
-:10448000ECF46429A7138EBFAC6BD548A6F609815E
-:10449000EF9232163D1FFEFA3DBA6D5CEBDC571908
-:1044A00021DE25F91214E79AA8713B63C3628ED707
-:1044B0000DCF5F733C9A760EF14B1C724A2A1E6C2C
-:1044C000C58D2DBDD9EE89FEA367544A5FB2EF3387
-:1044D00092BBEC05CF41DCB70CE710A73CB519CE79
-:1044E000217A2EEEFB2E6305DF1EDA72741ECEF3E8
-:1044F00057758CECABC0337CDE5C9DC5E552FC4E41
-:104500008129619CE59A885E8FF69BAB9D99983FC7
-:104510003356C46D0ADBFB14A48B20EC65A184F731
-:104520009A9231FC9EC9D8DD8CFC44B570E6AAF5A0
-:104530008610A569F9510A1BEAA7F5B56BC6E3A574
-:1045400004D64F513F8C11EF03ED337F8572734CCE
-:10455000244A79B8D02FE647FB42E0B1C0CBF976C8
-:1045600079435892A07D3098A4F8A453AE8F01FCF3
-:104570005C9266BF05449DADE2725A86FF50CFE75C
-:1045800047EC727B9CE35E74C091F792EB15F9EEF9
-:1045900096DC2EE29B3A411D9433F9E529FDEA8031
-:1045A0000F655875AA7FC0AA7F46F88010889E2D97
-:1045B00078F02A25CADD3D2EFD2B4FA17EAED7789F
-:1045C0001E99B82F972DF0EE438719DA0D4C79C557
-:1045D000C47DDD11E6DFA53933751EF9A1D975D685
-:1045E0007D3A7E5F19CA18C6E9B2C5FCD6BDBA6C61
-:1045F00066BC590EF4906D26E95E9D6E7D57C164D0
-:1046000009CCC3D17D32E5D1E9BE08C9A79E051EFC
-:104610001DBFF3A1897B7A2E717F3CDB3C4DF7EB0C
-:10462000B287AD8FDFAFB3E0CECEAA7AB3DCB0CD28
-:10463000B31EE3DBB0F6D119EFD7D5713F29DBE428
-:104640007188B4F1E97EDD8EA965B6FB75340FFA89
-:104650007182FEAC7B764EB8CEF5ABC96CA74D0827
-:10466000DBED880BDDAF7385ECED775C203FEB1362
-:10467000DFAF137818D6CE610FBA2C3B7494CC7090
-:10468000FFCE34C8F41D91DC8F92911912C52548D4
-:10469000DF5B765E1E1FEABF9D9D9767E5F53BECED
-:1046A0003CCB7ECB9D6DC7B7D3EE735745A8CFC526
-:1046B000DA79BBF01F402F0F791D765E5366FA70D2
-:1046C000CA8B7C36B8FB4A18E768ED8F14CC57DBF1
-:1046D00095CBBF7FC486F9076FCDA07DF1F1EF1DAB
-:1046E000ED9AD2AFE2F76F7EB794919D64C511DC6D
-:1046F00002E65D45F27A0ABB773D44F8090A3C348C
-:10470000E107C86A0857F171C467A617F316F29B50
-:1047100018352AAC08D3BEE3670964BAB4155351FF
-:104720008FD72356D2F034C363FF4E40A39EEFD8F9
-:1047300047FB3E9F3B077F907F4F618E61DF77CBCA
-:104740004F427316E7BBBED24E0727A4C8A0025D36
-:104750009ECE2A15F6CFA08EFAB27BAD8BECC68723
-:1047600096946DBD12FDD5A0ACF3E3C8A171681F8E
-:10477000351F35BD68E76D8F4CF78E83F70F7528B1
-:1047800061340F9F5AB2E655ACC776BBC80E7AAA01
-:104790006F5EC18A34BEDBBC7BC1C2C5F8BEC345F7
-:1047A000FA7DC59EFB064A83D8DF559BFEBDA996C0
-:1047B0008DF7E9E8B7BD51EBCD68C75C9DC5ED92BB
-:1047C0008D5A92E24F1BE7690C5DAE8D25F5A3571C
-:1047D000A0FD708D96F13EF95D596E7E9FCFD52A72
-:1047E000A17C2F8C66BE1760B51B5BF35B3AC708D4
-:1047F000CE9619FA71AEEBE7C9587F08F655975275
-:10480000F49427E86963D1BD5B2B707D0399EF1D9C
-:104810005AE5DAAC719C4E23763E7715368DC67517
-:10482000BBDC91817A24AE4259C7B888CBDD1AB976
-:1048300019EDD1AB5D48E16C73C70F1B16E1BE8467
-:10484000255D8279826A6415D159308BA13E685802
-:10485000126945BC1482FEC3D05E61D12FE99CA2CF
-:10486000B04E635EA87B96F4245CF0DE5311BD0A63
-:10487000F1FED25AFE9D97C2A08FEE051546F8397B
-:104880005C61BB9BA1C9B0115C6017F90712C589B7
-:104890009C7C64ADAB792997E3BBD7FE7654A6EF39
-:1048A000CD546495115EBD867DDD1ED4BB30CE54E3
-:1048B000737009E1BBC6CDE2C4BF6EA2EF5DB52E39
-:1048C000826BD794935F41B87EF7FB2CDAEF6B993C
-:1048D00029215CF943FC9CD59A27BF6950E1F1700E
-:1048E000CE874EBEB3F8C109DFCED9F3E83C6E33B4
-:1048F0001B9C8FF88E9D95898E3617ADF1A6C74506
-:104900005B05FDC13E907C89E98CF65BF957B61ECC
-:10491000F361377E315289FCF1B697DF5BBD6FA939
-:1049200046EB7868AE46F1C687FCAD44F7A736BAC9
-:10493000C287101C555F88FBB9BBB8228CF1B6BF8B
-:10494000C3C3E734FF60F7A82F55223EBFF8872C7A
-:104950003ECE14D51AE76744EFB55E827386D2FE69
-:10496000B31568872E912753EEF4AA2524BF5C4225
-:104970008EBFBC24AF1EFD94C00DCB1997873C4E53
-:1049800011585BCDEF3338E47EA24EDD3D8376894E
-:10499000C77FEA85BC1B7BC3F47A5C67BDD00BA6DE
-:1049A0009AF9BB8CB9A27DE150044DB261F19F5CD4
-:1049B000A13FC6EE763C177A2177581C7CB0E266A0
-:1049C000903F5FCA1276E408719F5D4BE6113F9CF1
-:1049D000017EA0B874C949A2FF18C809B49BDF9032
-:1049E00092A11569E761D677E67E22E24111B39480
-:1049F000F284DF12F1A09F8AEFCEBD23E241C745CA
-:104A00003CE8E7221EF40F180FC2EF87792FA77D2D
-:104A10001B57F7513FC67176D62CF01830CE547D17
-:104A2000F02504F28BE6A04FE4DF13BC414B0FCD21
-:104A30003D7F9C2A8170B9312EC5E17C597C8FEE77
-:104A40001501D78080EB350197A507516E209DB1E8
-:104A5000B1AA9E491E06D55609CF7B515EF407497F
-:104A60005EF03CF1E01AC998305C4EC078A3D3EDFB
-:104A7000748BFE4E8DF2111D3BC77F348BDF3B7C68
-:104A800069EDACFD2C98268F220B5721DDE5C3FE86
-:104A9000A03C8A3671391EC57B176972D58AA7C1B9
-:104AA0008E8449EFDCC0F134927CB9905C2974C8E3
-:104AB00095DD2857A0BE1BE54A305DAEB4F6E3BADB
-:104AC000832857584A0F05239F4CAEFCCC5B668B5E
-:104AD0009358F2E56A6063B213C3A04FFD9F5E9FD7
-:104AE000BE2DE4C485F4AA95FF113019E9F53D986F
-:104AF0001782FECC7846F770147390F28972DB5DF2
-:104B00000CF341B66297D1E8CF2CA47C901DF33D05
-:104B10003AD2C5C3522284F8DC27F578F9BEE8FD05
-:104B2000682F6C9BC0E3243BFE788F17EDEC976EEB
-:104B30002F08E0394E6FAE9507A22FBE15EAA71ACF
-:104B400019D1C98A3D2B6C790F3FCFCA237CE4C6AB
-:104B500040FE003E1EBE9DEB1FDDE079205066CC7E
-:104B60000371FB443C488D85903EB649510FC561A9
-:104B70001A65D253BD619EBFD20B7E399E0FF636A9
-:104B8000EC9C83FA79C3AD32A37CF1CA9E7B50CEF4
-:104B9000744C5868205FBA4697BD89E6F8069FECCA
-:104BA0004DCF23C5E304AD9A9F1B8AD2CC01903729
-:104BB0007B4DE37CF74755E1F7617FF779F2E03B06
-:104BC0007343A3314ED0DBB83084F3F68E8A84F27F
-:104BD000283F650CD9031B476D5A8CF1A78EE51A47
-:104BE0004BB79386CD17B4DBD7569C516DE0F923B4
-:104BF0001D32F72F73C5F934F05525E22D7D9D0840
-:104C0000A76AF2FC115CAFC2D74BDF37CD6D00FF56
-:104C1000B08AAF1FFD57DDA78F46F9A136F0FC9192
-:104C2000CD7E7D31FA8D4E38ACF1AFCD966CFE91D4
-:104C30006EE52DD4AFE1E788453C6FA1D775FEBC8A
-:104C4000850E210F2DBF71247CB81CE7D4BD5E7B7F
-:104C50001CD082E74A513AE118295FE0D3CE7FA108
-:104C6000757FDEF38D9447B0265BB2DDAFC8B5F239
-:104C7000591AD784504E58F06CBE40FEC8A785AB79
-:104C8000B991B7FFBCD7FB3F6DDCFA6CAE1F814F0B
-:104C900007F01E65C7C499219443A978CCD0403948
-:104CA000DA73E23EA3953FE2D2F93F55957FE74E96
-:104CB000CE2EA2EF2CABD379FE08FD65C803D9C474
-:104CC000D86CF4775411BF71F2E985E077E68DDC9A
-:104CD000EC137E63D4319FC813618EBC1335C4F3CB
-:104CE0004BAC7C922E09D6174CE5838C38AF036F02
-:104CF000E385DC7FCFD17FD8BAC3FC7EA5957F3218
-:104D00002C8F64AABC1FB760581E89C847E9C935F3
-:104D1000E23C4F9CE795A0DAC478DEB03C92A9D380
-:104D200043F84DC96925A2DF0D8CBEBFDBE3E5F575
-:104D3000DE392C8EDF3BEBC53AF2532DA3BC9661D6
-:104D4000F92553D7109E341659C6CF77F879BF8509
-:104D500007677EC905E9ED027924419FF53D8A0880
-:104D6000CDD3E30FFFA48EE093E93CBEE04BC7C375
-:104D7000E9E35FE2E372B247E4E1F5E4DAF3F1EE8E
-:104D800013FB5221DA39F7572FE274DD55AF53DCAC
-:104D9000DDDDC0E395C3BE035163F7079CF1BC138F
-:104DA000425E5F68FDCEB8DEB611EE9B2DF0F13CA1
-:104DB000AE87961CA2BCD833AB40CF02BE1EC67CC9
-:104DC000969A8BCF67793D8BE7B3F41AF50B2F4595
-:104DD0003D16D518CAD35ECC6781F71B1A46C86743
-:104DE00011F1442B3E3A523E4BEEB9F3787B3E4BE9
-:104DF000EFAD3C9FA5B787CF638DD7DB504D76D6FF
-:104E000048E33E3DC6947DB8FF1517777E3AAD2442
-:104E1000F26798BFD253AAE90F1A482F9C9EBB1A7B
-:104E200035A2EF2E17F76363A3B9DFCCD4786821DE
-:104E3000B4D9E24F2CA278B2C8CBE815F7E7FF3E11
-:104E4000CBB0D9C79D8DDF0DA15D0F74F8B2CEF93F
-:104E500084C6C9574BD7830DC8DC7A8B893EE540A1
-:104E6000368F23B842C706EAD2E8748BD077881F02
-:104E700019F0932B9DC357542EA0E83EFDAD11F4BD
-:104E8000F946369FDFA243A64E0AF3F33F568172DE
-:104E9000C4F25F87B5F3F076C3E48F438EF4607E8F
-:104EA0001B562C797283254FEC7469C90FE6903339
-:104EB000E7E4C91C6EA79F9327203FF053674E3944
-:104EC000D4EBE5FAC282C78D8219E4C87BAEB02D5F
-:104ED0004EE3943B17E2A3CF5BEEBC949D2FEC0F07
-:104EE0002E7782481BC837D9D63922BFF77066EAB9
-:104EF00083240F3D2A5FB727C2E87702B08EF2DC29
-:104F000083E72819E57AB544F106712E922FBE3F4A
-:104F1000F8B02B4CF9690F033FA39F37C170DA67D4
-:104F2000E73F57709E273DBCF66BDC3F037CA3DF59
-:104F300075B172C892131F66F3759FA32F93C3694F
-:104F4000D1571A3DD3F7052CFAB5C6B5E898218399
-:104F5000169C875E055D63389AE2D431298E711004
-:104F60002B8FCC1AEF0D1FB74746BA5F65B5FB8E86
-:104F7000E5779D8B07EB019DF2C97AE8BE39EBE23C
-:104F8000F43787ED56D754513E81CA289F2052826C
-:104F9000FECC619FDD2FB6F2C1A69584432827364B
-:104FA000083BDDCA23B3F2D20EFB72AD73665B7EA3
-:104FB000DA8611EE67BF790E3F17FFFD13FC6EDB3B
-:104FC0006AAFF938CA45C09729BEE7447968D6B8B0
-:104FD000DF15787ADD633EE9FB0CF7275FCCB2E79B
-:104FE0005D75FA0C475C80E375A21EABA7FB785198
-:104FF0007EAFCA79AE3ED2FD57E7BDBD73F75FC540
-:10500000F97BB327FA32C1FF22CF7FD3C3D1839D6F
-:10501000ECF35BCF01AFF9131CBF53F0F7B420BF23
-:10502000B7F3BE27FA363EBF8E71BFDAB2730E6396
-:105030003BE8EF7F19A436D0CBA65A4EAF45958CEE
-:10504000BE3F3EBD95D7772CE5DF35ED7F9DDFFB7D
-:10505000D816E5DF33857E7D32E065C778AE0FF781
-:1050600057F17EFBF17E13F26905B7BBF2307AAFE0
-:10507000A0B88E5239BDA6C73B01DE1F582A535C2B
-:10508000748FE08B003329CEB1AD92CFB3AB427EAB
-:10509000427C8F66D12D50EF9CBD7232DE2FD92E0F
-:1050A000E229FB16AF7C02F3FA3E08940BBA4BD010
-:1050B000BDD79EE3B7517CE4A12579D24A58E3BE1F
-:1050C0008399F35BAAFCAAE817738B789228131ACA
-:1050D000965B4D91B7DACAC4F7D8631AC69F9E197A
-:1050E000E479ABDDAB9F393613F571A54C79665D7C
-:1050F0008347BD97E1BAEB785E4F919A90D2FD1746
-:10510000AFDFC5EDB49AA31EA36A78FB67068F12C2
-:10511000DD6D07BC2B69FE9F2CE0EC467F02FAEDAB
-:1051200075F50CCC84767BC7E5493123D56EB49FE9
-:10513000F35FF712597C879ED1771C3ACD531E94AA
-:105140009B9D78FE01EDBB6BACBCD41EBA97B577C6
-:10515000CEE4399827BEED061E2CED0A1F223FB97A
-:105160006736B7CBF64AD00EF6655F8B763DDD63CA
-:105170006AE571222833C6897A311118F12ACEEDF9
-:1051800028F505E6ED6CE81BC0798AEAF8F72D8A68
-:105190006A32F77F21E0A6FEFB5C318A7F8EB47F06
-:1051A000FFEAE3F8ECACE2E7058CC5292EB55BF825
-:1051B0005D4C8D1AE9DF096D0970FCEC743113E365
-:1051C00065BE3A8DF4BA1C36C80EF583FD88F1B879
-:1051D0006D526C31E687C42669EC71C288E91D877F
-:1051E000F1BB097961A4BF4D522284DF558E8DE356
-:1051F000F1EDA3919D74EFEA00D8D1140E6609D2A7
-:1052000053DDD13CBA0F7534523D48FD7D15BADBF4
-:10521000D22898374F1F8A646CD2659BB6A25DD3A3
-:105220003945D6316FB353AA8FE278B15C0FC5917F
-:105230005D53E6D1FEB946E549E9FAE8463FD70BAA
-:105240002727446EF4C3BA42534EE562DC727BED0D
-:105250002BFB70FF1EB9DF4374F448EDE0DD38CF5F
-:10526000FEB3571D8F125FF2F3BA476B4F97A2DD63
-:10527000B3ABE9542EE2AF18E373A00F8B2B781C6D
-:105280000D3520D9676A0FBB19F058DCA631234DC4
-:105290001F7B193FCFC33FDF64927BF4F7CCE0293B
-:1052A0004F0B8EB784252E0DD0730FC6B32C3953F8
-:1052B0005CC71205200FF7AF78278679728F4C2CC8
-:1052C000A07B9445E23D494E18AF448CD7FFC62BD6
-:1052D000EBB1DDA3D50506CA8BE281A179A8248AAA
-:1052E000AB4E539C2D64DDFF881AFB6F25FA94E9C1
-:1052F0003B95C5E177FE02D711F0F5919E83F61438
-:105300003773AEE3E309E67D88BF6F4AADAF8E0B1E
-:10531000A6FC31FA437EBC97DFCB2ECEFA87B94A82
-:105320005ABE6D89880B6C920667935DFA00B7C30D
-:10533000C7B238C9B9E2AAD8DD3CDF364AF9B6CEE1
-:1053400079B7FBCFE95789EE51E737897B25FC77A1
-:105350006C4AC4EFD838E93E14CAAFEAB82A55DF20
-:10536000173D45F4FFB466DC95E97B0FFB845CD800
-:1053700024FC316BFCB1B97C7CABFEA8CEE9F1E931
-:1053800097F3AEAF82F5FC555BD9248C7FEE18C144
-:105390008F5B19E0F4973D00160EE881FED75EF3AF
-:1053A000623ECBD3325B8572AABE2AE14956093CE4
-:1053B000C2F8E48BC1F807C2DFF6A05CFA6AA092DB
-:1053C000E05A3195C70D3AAB1EA473A090CEF50EEE
-:1053D000F227CA775F282661DC7B790DD30F8978A5
-:1053E0004B0CF04F77E76596CAEBDF9E4B7E0EF0D5
-:1053F0000ABF5783B94993C5EF4F94E339D1A6BB90
-:1054000045FEAC8CF8EE14F300DFD23C078AC438BA
-:10541000F771FB1FFD0BEC5F2EE629AFFBEED750BB
-:105420008F17E99C2E52F0F57908BE5699117C6AC7
-:10543000E255F443B74F2A30906E0E84C26F374165
-:105440007DF92295E2F1E5351C8E03AD32FD1E900B
-:10545000BF4E3B48F7C74CD01769F832C4BC45353E
-:105460000909CFB58C56BE2E68E745B96884011E80
-:10547000A81B625DE7E09FA411FC459E41CC2D3A3C
-:10548000878795381ED0EFCA3ADECF1FEADB8272DB
-:105490006C791D871BF43BC15314D60EA2BE2F0A94
-:1054A000F1F196037E0E4929B8B22DB8EA64CABF5D
-:1054B0002AAAD10EA21F9C2DE05B19E6F0F4BF7E54
-:1054C0006A40E2E319385EB680375BAC9F12760B18
-:1054D000847E80F19E7225EAF15ECEA929CC38C483
-:1054E00067A37896F57E572BE001F0E317F3B0DD64
-:1054F0006EE2275862EC6399FF7E889116B7A8D8B0
-:10550000ADD9EA7EB17FAC8B3F273F8E5422AFCB23
-:10551000C2AF5B5965EFC76AD2EA6578BF8CD3FB2F
-:10552000FA6BF979C78109DC3E42BFE31C7F239DFA
-:105530004F311EEB0AE27B8DF45D49BB7DDCE2D688
-:1055400082E9281F8A071E9E27C37A8AEE65B292D7
-:1055500043F42C9D937F30DFB7D724E8FE6CF640F0
-:10556000240FE55D496BDE74FCFE5BF64094EAD9DE
-:1055700003AD26CF3F0317260FF3F5D2E6294539B1
-:10558000CDF3E958ABD68772AD361D4E785FF27217
-:10559000CF5CECBFF9EE574623FF1638FA7B72B8A2
-:1055A000FF50FC32B40AE0FCA7D7627B2BBE938D80
-:1055B00010E751F93296C53E90C7509688FC3B4B98
-:1055C0005E744E786752D427E887F2F15822DDCE18
-:1055D0007796D07EBC681F93CEDBEE34B51B29DEF8
-:1055E0003410E0F1A680B0577B98B19FF47B0DCFCB
-:1055F000F7F0E173D01F7D3547A7D37EF6B130D2E7
-:105600007371DB9FDCE9F2FAE640A9B8079D20BA86
-:10561000D74AB2E87C0FF898BE6F7A406DA573D672
-:10562000BE227EAE7974CE2B12E2B3E8399EA76D0E
-:10563000D9CBD36B12217CDEF56AF432E2CF11ECC8
-:105640004FCBDE74AEE792FA07491E8C8D322F9E47
-:10565000AFF957AB94C75A1205B8AA502E00491794
-:1056600002FC35B1F548374694D78DD5A25C05E5E7
-:10567000D560DFAE1B28FFA52B35EED60AB06BD167
-:105680007E1ADCEDB901ED9556B0460CB4174F7992
-:10569000F07B2ADDADD3F311CFCF442CFB3221E1D7
-:1056A000F8453F35C95EACD5351DE33013DC89D1F3
-:1056B000E9E77407E6BC534DDF139B7F71F9642360
-:1056C000E91384454ED323FD554749BF3CE11F4FA5
-:1056D0007AC8D22B961EA11141BEDC22F8A8CB4875
-:1056E00078249257C0BB00E72D2847808EFD455C8B
-:1056F0009E831CE672CED2277773BD6FC9CF0A3165
-:10570000CE2D286FA15F77ED13B937A05C1172D64B
-:105710001F3266E2F95C8590AF4C8D4938DF8129F4
-:10572000FC7B9501873CAD68E5E3748518D113E8EF
-:10573000A1834837078A12744FFC40EB5129FD9E24
-:10574000A9A5EF02AD4986FB3FAE8ECBC17142AE3B
-:105750007EC76F70FAF470B97A4EEF0979BBD53C09
-:10576000CAC4776133E661FDBDD0E73D1587C82F18
-:10577000D876EB29C2A7150F0D89786877D55BF429
-:105780007E7B94DF03D8654E9F43F047966B947FF2
-:105790005A73744E19FA1B4DCB35B4EB4E060AAC56
-:1057A000F32FEF42B4275B5791FDEB13FBF85098B2
-:1057B00009BF53233FEBBEA5DF1EC0FE21F08B24A3
-:1057C000031BF579DC48E7F83D05C47774903AFB94
-:1057D0006A0CFA0E84731DDF0BF0EFD2FAA3C981B5
-:1057E00071B4AF325DE9F1D530F23B97835F87C387
-:1057F000EE56C3DE09F07E7793ACAF67A9FEFF2BB0
-:10580000C0F3D126FAF93D859D8B4F6FC138DFCEAD
-:10581000A5E23B670EF8EF6BECF328340FC60428C3
-:105820008F39E3F7F6ABFC59FCFB0B357D0368CFF2
-:1058300007AA385C2F060C8EF7418EC79E884C7CD9
-:10584000B46BB0DA8BFACE69373E92FDEE249ED768
-:1058500062D73717AA173BE4FE0477DF7524EFBE43
-:105860002993BC628CCB3B89C906FEAE464B80D3E4
-:10587000539590D71DAEC47ECC2BE878D6C7D61BE7
-:1058800029BA28126376B6CA197F3FED5040E1FB72
-:105890003F7CDFB9FD20F6FD4981870BED3F86593E
-:1058A000D09EEE8B6F1A7307CAF156EE3FF725DED6
-:1058B000A2BCA3A2D90BC9EF3972F052F2078AAA8F
-:1058C0004CDBEF6B668FE0B756E478CE1B0F1849C0
-:1058D0001EEF5BDD417EF6BEC1CCF7620A72785ED8
-:1058E0005A1FC84BFCBEC948F3EB399CFFFE292068
-:1058F000E86ECE3BF4BD8C343DFBB2D0B3A46F8BCD
-:10590000551653D2F21C2608FC39F52753E39E4B5B
-:105910006B88CE097FFBC4F9C543A64C78B7E81C59
-:10592000CF0F10AFB00E53D0219D6FF4B0B807F970
-:1059300026D6C4F33C9C704FF0CB17B5BE600EF773
-:1059400043CECD27FCF5897E0EF7CEDAFBE99E2308
-:10595000CC1742FA907EF01FA7E93ED4B32EFA3D51
-:10596000DB19CFBA1218D3BAF320FFBD45F9452F82
-:10597000C1F9CF87F9F7D5137E6E8FFD5AE7BF5770
-:10598000F455F760F717A03EF4ACC2C89E8C83E2D2
-:10599000027A3D2DE8953DC7EB2BBDBC7AE7C1FEF1
-:1059A0006538DEAAE7781EE69DCFDF76E317A07E96
-:1059B000DB808BEE0CDCF9F87A6D0CD46F8F4B7DAD
-:1059C00058FFCD7446BFF719CBD328CEF59BC060E6
-:1059D000C102C0F707EB3CCCB80CE3A48305F3018C
-:1059E0000F77C49F9E89FDEE784A0A23DBCE78F6B6
-:1059F000F15746035C777E43A2FCAFAF1CC9B6D912
-:105A000085A76129D3E0FD9A83FC77236F633D333B
-:105A1000111F773EDE4BBF7F68E1F3837595CC485D
-:105A2000FBDDB03BBFF134FD9EE15DDF92E8F71591
-:105A3000EF92F93DA27F7EDEBBE8311FAE6FBD76EF
-:105A4000A91FD7B559C376B7C55BBE8B294D77C49F
-:105A50000F6A33E1FD1D070E6A2BD12F73B366D495
-:105A60003F5F3972854DEE9CDEA7907FB026D7430D
-:105A7000F7EB99CF0CCD9B307C9F3F58C76C70DD06
-:105A800061C509D4B83637ADBD4BE7FEEF578E2858
-:105A9000B6792C3B20768CEB85D8DFFA297E6EED2B
-:105AA000DF1AE1775BFBB7C60AC4AB439333C1D3BC
-:105AB0008DFB01F0F4ACD3A9DCB92E44E5EE7506FC
-:105AC000EDD35EC423945D02EEC054568FDFE70F22
-:105AD000983CED38AFC9ACC7BB6579115E2F581241
-:105AE000253F64243BC62AF7BAA22DE84376EEE8A8
-:105AF0009FA582DDB3578BDE8D912FBDE3D5590D68
-:105B000050FF9B9CC8C61C92376103F9CEF2CFBFF1
-:105B10009EC3E5EEA6D11AE17BEFD2C98F2996FF8D
-:105B20008571BFA52B9F407B02FA6FCF21BE0DD39D
-:105B300077BA46EA5FB0ACCED6BF60D92AABFF1EBB
-:105B4000EAEF397FFFBDCBAEB1CFBFEC0EABFF2389
-:105B500004BFEFFCF017344FB5CFDFBC9AFA7FD506
-:105B6000CDF77728D743F9F41DDE70C245FE33A385
-:105B7000EF73A879971EA2EF279D8B330D9AA86724
-:105B80007D4FE556A31C4BD1D1F46FE23AFCC05DCA
-:105B9000E97494539765E3AB5C33CF56CF9F3DC612
-:105BA000D67E54A4CCF6BE70D1E50EBAF4E99407C3
-:105BB000CBB83E3531CE09706A63F8F79AEAC778F8
-:105BC000687DF7BFE8A5FAFDD7F0F5DD3FC6477C55
-:105BD0004CBA0BF6FD7E2D7A65BA7D0CEB9230E463
-:105BE000F58C1E1DC8A94D7F6EC8F83C4BE1BF6304
-:105BF00097E5E6FA7273E9E4C76269F8DC520CF4DF
-:105C000000F5B773345B9C6773F1CA504BDA3C9B69
-:105C10008AB54587AAF8F35BD08ED7237F87F37DBB
-:105C2000551BBA14ED57E73CEEB23ADB3C9E925559
-:105C3000344FD2318FBB6495631ECFA243E2B99833
-:105C4000E714D2C948F36C2EBBC6BE9E923B689E39
-:105C50005FE33CB569EB29B9C3314F165F0F3C17C1
-:105C6000F3FCE6BCEB299F6A5FCFD8D534CFBF3BAE
-:105C7000E6718F5DED98C747F3E0739C8715713F20
-:105C80004A730FADA4FDFF8197611C487347FF9ACB
-:105C90002EA9FCBD97E2C2D0CAC476FF07FE2263DC
-:105CA00096008000000000001F8B0800000000002C
-:105CB000000BE57D09785445B670DDBE4B7727DDD6
-:105CC0009DCEBE10C20D288B86D88190015CA6594E
-:105CD000E4A122065770810E4BF6A4A3E23C1C758A
-:105CE000D2104554D446518306A6C1A0E0800626B2
-:105CF0006880800DA883332E719EE3320B368804B2
-:105D000021260DA2E29BC5BFCEA9BAE97B3B1D604F
-:105D1000DECCFFBF79EF8FDF4C51B7EAD6AD3AFB4F
-:105D20003975AA9A0C4F22641C21FB12683986909F
-:105D30006FE33C17396D84FC007F3F26F4CF474862
-:105D40002A2FD3085940F85F60A9408A08A9B5B046
-:105D5000EAFC4D33721643D93629A3A490FE63A5FD
-:105D6000DD75BE4A4877DB24655E5E643CAD5CE071
-:105D7000978F8486B3777F2091EFF82692E175F4B0
-:105D8000FB65094E9C8F563F524FEB66420ED51372
-:105D90002C3B6532A7983E3F5C4F27304C3FDFC518
-:105DA000F8DE1189FE3385964D42C027D075ADF8D7
-:105DB000402643F0331F0EA7EBB8912F63813F9E1F
-:105DC000104B641E5E3371C37BE1EDE6C03A019E69
-:105DD000BA07983268D1984C8836DFC184FC69F7DD
-:105DE000D56F090EAC0E308D25E4E6655BDE846E62
-:105DF0001F092503EFA0EB9DD9BA421E40EBDD72CF
-:105E000068B6CBA61B67A67C08D66DA1FFC138B3C8
-:105E10003CB4AEFBFE2DE5C6FA6D448AD47309B9D5
-:105E2000D03998E3837F570DC880AF1BE99A322998
-:105E30000A6F837214343B115FB39DEC5D6D3EDEDF
-:105E40007B641284F948A15492072DA9D8CF03FD91
-:105E5000D4BEF39B2D5BDCC5149FB3EF16118ED11E
-:105E6000F30DED8E779BF269D9F8B54C069F7DFE58
-:105E7000731619DB898F7D4F83AB460737CD9CF0B6
-:105E8000E4611D7DCCF25CF1E461039C6618EAB725
-:105E9000D5CD32F49FB3A8C4D05EE2AB30B4CF5BB3
-:105EA00076BBA1BEC07FB7A17F59E362437B45E0CB
-:105EB00021437BD58615867A4DCB2A437F6FDB5AEB
-:105EC00043BB69F7886B088563C3EF4462A670FC27
-:105ED000C676E4B18B53A0945C00F7A3F51948D7BC
-:105EE000C7EA552C6B81F6C601FF8CB678289EBC9C
-:105EF00071E1529248C87DFE4B962DBB84D615DACF
-:105F00003E9E52BB7FE2325F3621CB9C2AD2BDD867
-:105F1000A8902025558124F5D27558D4B587CED2C6
-:105F2000DE2891E0E8BEED6228F6F31E213C348BBA
-:105F3000AEC3F7A999AC17FAF279842FC90092D1B0
-:105F40007F7B978994B7E8E4CE7AA709E793EA9C28
-:105F5000B8DE49E9A15A61FC5EBD35732271403D4E
-:105F600038B4CE7686EFB5D0C9A4C3388C5F2A0288
-:105F70000322FC8BF81B62E0FB61099E6627FD5E35
-:105F8000D71E7126CC8304F7E55C3712BEEF5E0F97
-:105F9000CF491B1D2493F277BDFBC9C3E713F24918
-:105FA000FD542C7F5F5FFCE46199903FD6CFC4FA2B
-:105FB000817A0F96A1FA722C0FD5D761FBE1FA45D1
-:105FC000583F52EFC3F268FD322C8FD5FBB1BDAB09
-:105FD000BE11EBDDF5012C353EA0F2684E31F069C3
-:105FE00071B109F8F40E2BE17FAC7E92AF41A4FFB2
-:105FF000EE40BE7665005F9FB47D3B348BD2DBC93B
-:106000004F2831E5F60FA768BAEB1F7F6E13E0AF9C
-:1060100034408927B96FBB358EE1C76A2253099591
-:106020003F0F9DAF10897E3FEEF50BD789B9F85C25
-:1060300002D2A18AC335C31E63FCF308E2EB6C787D
-:10604000D2FA1F79F6CF4573F3003F83914EE2F603
-:1060500089750C6FCFBB006F67839FC4F92B1A8EB5
-:10606000C2EB7FCA09D1FE5FA56AF0ECC821B4BCBF
-:10607000CE597C14E8E064AB19D775B23D3E406060
-:106080000C670AD245FF7063F3A8DA60F5EBE543CD
-:106090004D4BA2DF282F32FD7A797172FFF30EE0AB
-:1060A000FB3B3244FFE1D1401F6E4E1F8CEEB4F13A
-:1060B0006B5A72FD36C338C6FA49BF30B505E5BC28
-:1060C0009A70FDC8FEE779478682DF39B6614802DB
-:1060D0007CF758BDC50FDFE9AA77FAD97733FC7A88
-:1060E000BAAC5E14EF3F9C1C995F7FE3FEB3E747B9
-:1060F000482BF9DC4210F43F0CE9BF7FBFF8904E0B
-:1061000029C5401FEDF2B7A077E2866B7A47C2BA85
-:1061100036AEB745F4992F82E79B0CDFA3EFA94772
-:10612000343C0D3E13DE2572445B27959323A9EC86
-:10613000063AA5C48C78F6D01113E8783D926D9993
-:1061400040BF634E54B1DD0B1FA2F4546309291EF6
-:1061500015C1DD0176D6DCB11ADFAB37FD8192DCEB
-:1061600097BF91C9C3D0FE173A3A6D9779EB7C522D
-:10617000EC20F47B735BABA6819CFCF2D5ABB89DA5
-:10618000E22F82757F454C53814FBE22BF758CD65E
-:10619000D965D3131536BF654C3FFBE87FB03E6A27
-:1061A000A719F47559A3B15E4AAE4D037E285D2947
-:1061B00093009D7B05E87B6DDD94EF2F4B64765C4F
-:1061C00019A95B0A76CAC3329909F89EEB24D2005A
-:1061D0002A276A5E5B5D5442EB37249A90AE8E515B
-:1061E000FB4EA572A82289D931952901C54DDB3F07
-:1061F0006F1D7DE3C504DE0F2C05B9E6B313D77A16
-:10620000D217EEF39619E777B6F947CF979025386E
-:106210005F6D1EDAB8DA3CC40D823B10C39E9D97B9
-:106220002844EC645ADE9968B45F17415D67DFDE8D
-:1062300017555F1255D7E844E674624EF42C4A4C69
-:1062400005BA084F413B8D50FAC88BF45322FDEE3E
-:106250003B533F33F413B1DF9233F5B346C67B3083
-:1062600056BF9AD736BFEAA3F454F9CA530E42E593
-:10627000F997923FCD459F57AF7FC001703A2AF9F9
-:106280001C80EF2F03E2D458F0DADD0B2FB74D005E
-:106290003F02499BC2FDA547A6839DF4ED7AD9290B
-:1062A000D22EDE0DE6A099D26F6D6BC534928FF5BC
-:1062B00083ACFEE00911EA6D467C56BEF8549A6A3A
-:1062C000473C307B9B04D1EEA86DFE620AC8712F5B
-:1062D00009231D46BF07DF3F9D847C5FA224F46D28
-:1062E000A7F3443BD9CBF9CCDBFAC809D101E515BA
-:1062F0009DC067DE283A2AEFD52F21A598CEE795D5
-:10630000447BCA910B69F547E447200F34B89000ED
-:10631000B32B1A363E937F90CEABABF9370E214F9D
-:106320002F47183D9E6C99F7F31D6AFFF2A69BFB61
-:106330004591F702F89EDAC6EC20D2CECA6A39E857
-:1063400000BBB37AADECA2944AAA373FFFC2B3E0D8
-:10635000AF7D6A467FAD6AF39B1F8DA7F5AA2D72AC
-:10636000CA34B61C9B9016C18F97FE6FD1A8083E09
-:106370002A7FF9A6A28E64CFEF4D8AE0A56ACB1ED4
-:10638000858CEC0BC7492D7B94902D067E5A0E4EC2
-:1063900001BBA561E3770AF85F5FEE16487A6EDF0E
-:1063A000F7CBD7BE897A11E084F8E4F8EAC55F1F1D
-:1063B000BC05A7EF28C47E4E909767C39B9FCBE98F
-:1063C0009AD7EC2491CEA3FCF7E6C034C0E7CB7794
-:1063D0003A603D9D521DA3F3D50FA4B9E9F7CB65F3
-:1063E0005F9A134BF6BC7CCD5D487F65425D9A1386
-:1063F000F9C99D6942D9EDCB84752E68BA01D75988
-:106400004A3C4887E5ABC5E2002DBF91C8D42D3189
-:10641000F8A42889F149E73A8A5CBACE4EB0FBC1AC
-:10642000DEFEAD18588FFEE9ED04E4FF5D7CCD542F
-:106430005362FD1B0BC3972DC9A4F98B1603FD36C0
-:106440003FD801783A36D09D0EF3A470F071B809A8
-:106450003FD071C50F2E4F677822AA54C4DFA3FA2C
-:1064600060123C87FE1DB2DB9A6F788FCB4FF6FD32
-:1064700085FCFB74DE71A0DF3AD3A87D1F637D73BA
-:10648000617DA817A99ED3D1998EDF19FF373FC42C
-:10649000F85DE3FFC08CA9D07EEA43C647F01EE852
-:1064A000133AAF603AB6EFB95E40F96026C1587C46
-:1064B000DE2C733E37B67B29BF429C40A3133A7F44
-:1064C0004948D0D30BFD4E12E201FD95D295F47DE3
-:1064D000BD7D03DFC57E4AE4B94EAF9471B95090DB
-:1064E00044E5417C441E90A6D473B223AB65E2031D
-:1064F00093B3FA5333FAE3D59BE56258FFF14DFBB2
-:106500003EBA99D2F9F1168D6F8D72359A6FCBB76D
-:10651000AE17804EA3F9F67839D5E2B1F8963E8FE2
-:10652000C9B7E5A1FFA7725583DFAC24A33CA5F250
-:1065300071109810FDC1315A3E7E03F6566A5FF91C
-:1065400048FF3E24457DE950A33F8DEEA80537085E
-:10655000E47A2F7D6AF4D74B9F1AFD45AFD708BF69
-:10656000E8F6C1E023513A29DE4E2D3A8ACFEA7689
-:106570002160463EF7BD35A010E1E446F546FC6FCC
-:106580000D48D1D70351F596A8FEEEA87A71547F35
-:106590004F54BDCED0BFBA6D9F4210FF41433FF371
-:1065A000A2E7C8E731FC414DFF785B4F283EA08B46
-:1065B000ECB002724F5E424D3788AFED1231BED65D
-:1065C000A3861D49F4F90356E6A7F538793D91D520
-:1065D000C3A9CA52907BDAF3B095A07FDE531C7634
-:1065E00024EAFCFF83EDA243A5EDA10099AA8F2325
-:1065F00044E6D380F80E91FEDA59DCB027CE918FB5
-:10660000DF8BCB0900FD5D2EDA721681BFE7175DC7
-:10661000947CC8FCC5373908A5B39EF621D7CCA415
-:10662000CF17BC2D82B94DD1E3963229DDCCE3746E
-:106630007C94F89EBE84AE6F5E3BB3C3E72F8F4D54
-:10664000F795BC7FA96DA102F295DAD187F471D1DB
-:106650004AB21CE9AEBC29EA79FB55C81F9551FC2A
-:10666000E1E1FEC32E8D3F0A4801CA174298FFCBD5
-:10667000E5F2E562DE3533291E7AF68BC4AC823F43
-:106680002B92A5B0CE4D4200E205C4978A7C564BB2
-:10669000C2280F353875011F0DEB5F4E756DFB532A
-:1066A000D13D402FAFFE21FF395A76BDFAE9D09D8A
-:1066B000507FEDE39C3F90BEFD27EDFE7E36E8B3B4
-:1066C0009EDD668C8BF5ECFE55CE3D50DF61C6B885
-:1066D00058CF12B31BF8C0B7DB1E381FDA0732FFE2
-:1066E000A161D777F921D4AFF723DE8E2631FFE5FC
-:1066F00064FB9F0F082950D25581FDB03B1EF9C89D
-:10670000BBC38AFE7ACFAEEF8A3CB67FDE7A6A15CB
-:10671000E2417AB493995B817E1359FCD8BB73DC58
-:10672000F38BE9F76B5AF728F368FBA4D7FF9A0FAE
-:10673000F2B3672BB38BBAE5D01AE222E4EBA4B232
-:10674000876488F301336511F278F2862B7C79B186
-:10675000E0C2E0D043E100EBA2702907B9DF1F3CA3
-:10676000E29215A4F77F3D789C98CDE4DA8F08C4B7
-:1067700085227011DCECB93D601170FDECF9EEEF93
-:10678000F241EE1C6F598CF6CAD9D63D22F95F95BD
-:106790000EFEABEB1682E7B2EEA9FFB2F866F4FF8D
-:1067A0005E928AF38CE683BE74FEDA4FB0FEB2DDF1
-:1067B00085F33D47FE2FFFDF86F7AD14EF8EB3E381
-:1067C000FDC1FFB1787F9BE3DDEE34833CDBF55701
-:1067D0008CB36AEB3FDBBA5FF81FBA6ECD8EFF95C4
-:1067E00049FDB080F67F9BF83F1C4AE7D994BDEF86
-:1067F0008302DA3A5120C5B1EC938F92991F385138
-:1068000030A1FF471205EEFF31BF6900B723062C08
-:106810002C457B6340F6A3683710495D09FB77BFC1
-:10682000CA99E77A187B8CFAC40375E7A5BC6EF4A5
-:106830001F9F13885BA036E8809CABF683FD9A9D72
-:106840002DA27D4B4BB46BDF704C65CFAB1583DF56
-:106850007405D1D5E9BAA6A418FDA2C97CBCCBC9E0
-:10686000E00F0BE8FC2FB7C8CE0005D115133C1282
-:10687000ACE78A4C81F875FB4793A3FCA7ADD4C65F
-:10688000D4C7D7FE5EF85952989F395118BCB21838
-:10689000E03750C4F8E159E107C61EC2AB20F03022
-:1068A000D845928BC12FA9C685F157EE57C37633D1
-:1068B000D82B926D6907F0AD44A85FCCE68FFEB48B
-:1068C000E617F70767C2FD6C897F5283BB942DBA28
-:1068D000ADC6F1101E1A3EFE5E3C68F8FB47F1F1B2
-:1068E0007BC0C798083EB24F3925E0CF49DC1F98DE
-:1068F0007CAA43C47AB64BC2FD17EE0F4CB0254AB2
-:10690000E00F5C2A7D20025F9659B657C23E82C5D1
-:1069100025205D0FEB32A1BF63291410EEC31B25A8
-:10692000AC7F60728E01437BFAC5AF1DBF9B403CBC
-:10693000D9AD30C3BB98C5F3FFF2C30F9714415CC8
-:1069400085FD95D1FF5D4DFDB1F94D241847E1B4AA
-:1069500040223E487158401775C8100F36D6E1EFF7
-:10696000B2B4C83867EBDF9F1CF96797AF51B975B0
-:10697000E87C42B643C982FD92DE6FFE513B8397AD
-:10698000F71D12188CF106B758ACDB67FBF714261D
-:106990003F5EFBE3D6D1103F9BD09397C0E469A143
-:1069A00009E8D2CBFD8293444D807C8593ED431260
-:1069B000701F71BF68F7C488DB6CE4FEF42FEA3106
-:1069C000A84C7A9A895F04BF8984317EEB6BB6C488
-:1069D000DC0F9E9B62E274C3F146FFC422D8B7600D
-:1069E000DF5F405F4DD0E3AD6BDA97527E5F3CC016
-:1069F000DF21DDFECA3F0A5FF0DF01BE1BADA1292A
-:106A0000C531E4C7420EBFE97BBFC778E705ED6B30
-:106A10004D40BF17349B0CFB93D529DCEF1A45463C
-:106A2000C1BCA6EFB5DA0B012FFB459795AECFDBC6
-:106A30007E42F1C4D8E78A86278C0F71F49752D82A
-:106A4000BEC04EB9651EC075E75716E2A3F8DDAEAD
-:106A5000F8AB62CD33258DC9B905A4E5CEFCDC7F4A
-:106A60003DF84EE8B10527829FD94C785C239AFE09
-:106A700008D2F1C90D2400FA14FC52900B273711EB
-:106A8000D4E714248F825F4DF9FDC7FA38CDB0B634
-:106A90002DBF003BA0B65D709A687BAD1452201EDE
-:106AA000EB6D4B1441EF16A8C48DFBC39273E4F554
-:106AB0003ABE78294542F8EE1BBFF316F8EED75DD3
-:106AC0000A017BC4FD46D8017AFBEBF6D1C807FD6D
-:106AD000ADEB97F5A472B20CE33079184D0F799BAA
-:106AE000E20CF58B454F16F0D7747368A12B06FEA8
-:106AF000A6A5323A3B67F916F8FF4CBE7DA8C93708
-:106B00008F58ACE3A3945446F73AF9961E4BBEDD7A
-:106B100021A8E900F73B760D4907BCDEF1B69C1AC7
-:106B20004BBE6DAE67FB7FAF507E84B2A795CAB7F0
-:106B30008B74F2AD95CAB7DCBEEFFDED5CE55BE0B2
-:106B4000BF87FF36837C8BB1DE440E3F4DBEE5B779
-:106B50001F44F996DF6A22AACE7EB0A49E4DBE09DC
-:106B6000A9D7833DBC5F76C5C7A09FCDDCFE7E85DF
-:106B7000E7EDC17740CEFD5B2ADB2F3D5739979972
-:106B8000C6F8E4AC72EEBF09CE9A9CBB631B95734A
-:106B9000B9B1E890C9B93BB6533927003D323977CE
-:106BA000C72EC2E26F51F26D781FF946B07F6D902B
-:106BB000BDEF6DCB7DE6563ADE28B7ECB2D0FEA332
-:106BC00022F26E8C5EDEFD5BAA8470EE23EFF69FF0
-:106BD0009BBCDBC6E51D95638341BE46D387AB3DB9
-:106BE000CE50DF39AE73D32F815FDE15717FF10395
-:106BF00013DB077A6F5C6721D0D72A3E1F2FA7BF10
-:106C0000EE7A1F8E3FE90DB6BE9A4D2CFE5DDBCAB3
-:106C1000ECC3DA6631A0D27F4E19FFBD02F3AFD8C4
-:106C20002590745A9F61F63F6D0319FCA24CB85F22
-:106C300034AD40470FF3C756611CBFC1EA5847281F
-:106C40001FCF978805E2F555B6295F821D5C359602
-:106C5000C5F7ABF873C2F306B43CC8D2B6DBDF1A93
-:106C600040FAE60F4C37333C4E7F5E08ACCD85FCD6
-:106C700025637B5554FEE3637C9D33C410C285BC01
-:106C80002FC6CC63782C1A1EFB393CE8FA0DF008AD
-:106C90000831E141313AAD202DB2FE8A77434B21D4
-:106CA0009E5FB14AC07D5F0D1ED1EBD4E0A3C5A7A6
-:106CB000ABF8FBDEF6DB71DF3F7AFD1AFCFAAC5B6A
-:106CC0008367D4FAFDA97CDFAB808C867C1A4A0FDF
-:106CD000283F7CBFA670A0DF299E707EBA5E1E3F53
-:106CE000CDE130DA3F61522601B8913AA09FD2C679
-:106CF000DBDFCAA4EB1FF3893A0AD4E4C5E3CD1E57
-:106D0000D847DD680DA37CD3E8AB53A3773ECECE46
-:106D1000ACBA89E8AFB7094EB02FBC412BC2D14BFA
-:106D2000E9CC4ABBEC5BF5ED140E47A719F98AEBE9
-:106D30001D0A7713F8539A1EA27007BE19DD7E0252
-:106D4000F7730B4918F74B6A1B055790AEA3B68D26
-:106D5000C14B93B7F4CFA6C7470C7A9462D1238175
-:106D6000207151440F56F17ED3CDFE8F601F663ADD
-:106D7000A5F7B52482C7E1F43FC063349E34789E02
-:106D80008D3EBFE0F6C76680A30DE0156676549091
-:106D9000EA057BA4DD2BF90C709CF4EC69465FBB23
-:106DA0000415F6137AE104F44ADBC7B4337A05B864
-:106DB000A900F7F61211EAA514BEC9B97DD709FBDF
-:106DC000977AFEADD875908DBF5A709118F4ABAD1F
-:106DD000BB3FFAFD47E9B6338A6EDFB386DF190D94
-:106DE00074BB4B607184F644C3BEA3398DEDBB6F99
-:106DF000B452FA86FDAEB765D73AB52F9F9FE6F03D
-:106E000004FB5FD5C5A546C002602F708305F3CF94
-:106E1000701E83997DA997AF9BAD24F5FAC2FEC77A
-:106E200057B83FD09F7DA3D547C2F740EEB5D1EF0D
-:106E30000D8F7C2F5ABE6BFEFED9D6959CF68FAD7A
-:106E4000AB377F9374E0FE9339D1734F0AC67F58F6
-:106E50007ED28D3C3F89CE00ED2C5DBF8CD431FDC0
-:106E6000F7231916D4C377F2BCF8CB451BF1D175C3
-:106E70007CED96914EA996FEDD25209727523D4246
-:106E80008BAFDF19F3F1ADD82EE27ED435EF26D7E4
-:106E9000C03EDD35208CE8F36B0A04D4BF1FC06010
-:106EA000E3C08EB510B79993306D1FFBA3C4C0C368
-:106EB000B4BDA0D93F49A5FC346A43A0014AD7A478
-:106EC00070CA7B00BF092201F875B8932781FEBA0A
-:106ED000F30B5220AAA867719C51FB492AF41BEFBF
-:106EE0004E4577605CEBCA49101F9DB1CF66033AEF
-:106EF0001FDE64221E1DFD8E278106D8871F77D8CE
-:106F00007D1DF05F39B51720EE5CDEBEB6C101F520
-:106F100026C1A5D2F1BD3ECF14079DD7E6C61353B7
-:106F20002E043EA4FD60186F13EBE76D165C902AEB
-:106F30005BDABE02F3714A9B05E284FE018158D8F8
-:106F4000B8010B1D7773137D9FD6CBE07D18B7F981
-:106F5000C487D7019FBF23B2F737B17DEB52FA9EAA
-:106F60000AF4DA7C3B8E57D124900C3A5EF926263F
-:106F7000FFCBDF915DD0DEBA6715EAB169F47B998A
-:106F8000B920EF8393A14E460B4EB0B749F6CDC85A
-:106F9000D73D9CAF49D74C2637045EE77E836637E2
-:106FA000ED4D63F9C1A5AEC54A321DE7BDB1A9B922
-:106FB0009026E06D3B81FBD187299C3D14CE1FF0CC
-:106FC0007C8E7D633F57423AFDF359DA10A4C3F932
-:106FD0006D1330CF610129C63C87E9E398BDF6FE09
-:106FE000A5D68040E7F5BE1CCE86E7FB2E35A3FD77
-:106FF000DBBD59C6FDE2EE81218C4F7736C904F224
-:10700000351A9A44948B9D9B981E1757DF30251391
-:10701000E0B75E7081DCDCD7344901BDD61910F0D1
-:10702000FD49ABEF4A637E0C93879ADF56EAAC309A
-:10703000E88F68F9A6C9BF1A0E87683957A3E9997E
-:1070400028395703FBCD0E288DCFBDC4C6E41FD809
-:10705000FD80F7E0F748BFB5EFC804EC7EE1F3AE82
-:107060002998B7057A93B68F6B17DCB0CF5FFE898E
-:107070003980F66AA064CE4F417E7F6A26820A7903
-:10708000F014EE542E8C3587FFF8247DFEE50716AC
-:10709000C890A174528270D6F2450BD7B3FC96C249
-:1070A0000F56A695021C2627A39C2D6B14894727F3
-:1070B0002FBE14DCD7DDCCE4B173BD4E1E152AFE05
-:1070C00052D05FCE742607D5F532E48C906D5C3ECD
-:1070D000517BDA0D7643C5F615690AEDB794E7835F
-:1070E00054EC5A914645036900BD45FB57286CFC9A
-:1070F0008ADD8273AD6E7CED7D6D3C6D1C65BB7170
-:107100009C21BB78FD1CC7D1E6A17DBF3F7B7CECF9
-:107110007F9C5E29D0F1C6BE2F6292F2D8CFA70D18
-:10712000D1EF7768A5167F2DFAD044DC3AB88DFDF3
-:10713000631C71EBE8A2750CE56F8AB7ABDB983D79
-:10714000D43AE6A05253887527F0732D8FD3D64ECC
-:1071500066FB56AD051FDC0FFC3DAD50403A203EAE
-:107160008F929C8276900AF1F1B242F67E197D1FD1
-:10717000F8AE7515E3432A0F549017B54D2BA66052
-:10718000FF664185F15BD796A09E2F1F2B126C6F77
-:107190003E88764779DBC114E057CA9F2B41EFD672
-:1071A0005E6276027F687CA7F1F1FB32CB0F21167D
-:1071B000E74838075096A6C6E45FF11DC2FCD44DDF
-:1071C00032F29D772CE3CBF7378BC8CFFB2EBD690E
-:1071D0000AF061F77AA11F3EA67C5A18E153713577
-:1071E000CBD729DBC8FC957D4D4C3E74B6323B7144
-:1071F000D26AF96AA897BD2B1316F762F6E0B9F2C6
-:10720000731F3B65436C7EEE8F7FA7CB2D1FDD493F
-:10721000E777CDCB74FE6A045E932EBBDB8171FAF7
-:10722000CB66E17A3539542AB17CA6F9FEC52CDF4C
-:107230005762796F7FF7BCA2E6F1609A3D2247441E
-:10724000A0F7449627DD2C23BD47F3E33FCA47FF51
-:107250002CBEDEC6E9489B8FB88BBD0F7965410A0D
-:10726000C75F6D7A1EF35ABF7AE9E074C073D54EDA
-:107270004ABF74BDDD9BEC2408724B0AA0BEA96C0A
-:1072800015317F9C48C1A2EBEC7AFE64F94955AFF9
-:10729000D8916E2AB7B2BCD3CA573FCFC77C9125CD
-:1072A00061CCBBF2BDC4ED4D5F281FE8BB526279D3
-:1072B00052D1FC3E219DD99F5DDBE367C23A840D2C
-:1072C0007B70BFB5B2E52619E8AF577EA4CB5A3F15
-:1072D000DCC7F451FA857D7698DF8C91FAF92D465A
-:1072E0003C756D64FC5FD92607AC30BF0D6B319ED9
-:1072F000EDDD7002F3E327BDB219E308DE36D19865
-:1073000017B9410C9A317F533C6846BFC6989F58C5
-:10731000DB5A83FB6EB52D3CFF2F2A2FAEEA955D1D
-:10732000AFFA2868AA7EF9A203E4C1B18EF50E80F7
-:10733000271D0FF30A2F3B2519F2A3FACF07761B5F
-:10734000F30D5B1EE2F986577792FCBEF986C7E023
-:107350001FA06FD2A3F2353724F3FCEE6051718C7D
-:10736000787EEFB99FCDDFAC813CF9AEADC7D7C019
-:10737000FCABFFF6F51AC86F22BBADA8A7BC2FFD6A
-:107380000EF38AB5F716A7337AEBDEF822E66577B7
-:107390007F6A467FA77B57670EE4B7756FF93E0D8E
-:1073A000E2730B775D8EF1CB85DB26A59318F25E39
-:1073B0002B813E03E790171E8D8F7DADFB300FEBC9
-:1073C000AB4FCC28DF7AF3475B6A585EAECAF34610
-:1073D00037C5CEC3D7F21C6B5BAFBBE65290D7ADBF
-:1073E000CCBEEBCD7B3C5BBEE88714AF179D03FEA4
-:1073F00036F1BCE096AB63E68B7E05FFA078FA79A8
-:10740000BA315FF49BD6053F7F16DA5A93FBCD174E
-:107410000D9E03DCB43CFFEA74F74BE9C0475BE325
-:107420007D190C6F816902D881DFE4C0F988A372ED
-:1074300018F340C2BBCC4EC87BACDCF531F24BF745
-:10744000B60F30DE4A789E7D37E9FD63F9D0025FE2
-:1074500067B39DE59972F8431EAAEAC0E73CDF9442
-:10746000D1B19687DA5FFE69289D9F1FE6E70E6A15
-:10747000A8DFC4F2D42379A9C258C0D741435EAF74
-:10748000B6EEE8F19C5C8E46F2AA63E7F96A79846D
-:107490007DF1C5F48A9637DDBD96E75BD3E7D9A3C6
-:1074A000204F8EE9736F40F838167EB5BCEA3F4432
-:1074B000E1575B5F7F7CA1F1E7D9E6FD5F85CBBB40
-:1074C000E92C9EADC1A7EB2FB1E5F4B79CDFA9DF96
-:1074D000FA4DBACEBF9DC3FD560D6EDA7C97B6301D
-:1074E000BBA26B03F31FA2F99BAEC71D2BCF5ECAD5
-:1074F00060F66F6DDB9E7C90435D7BB773BA6374FF
-:107500005DBBE920CBD3A5723BA097DB84C591A3DB
-:10751000C773F0F1BCEDB1C7F36E3A1173BC63925F
-:10752000FB2698FFB10E66471D6B11A706628C7F84
-:107530009AEBA5DE75DB15CC97121D71684F2DB443
-:107540008FFD2421054A05F37E1A16F33CA1FB5C4E
-:107550001900E706FB9504E6F300C047177F909DEE
-:107560001E02769C9C515C28AA91F96AED4A8A8990
-:1075700004F4F89782D920DF0F1474CA30DE675103
-:107580007193CF24B2349DCEEB339FE05AACF66FAB
-:10759000776B75CFBDA221CE516B0E1F00FB9DBC3A
-:1075A0006EC5B8B5B8DBEAC3B8D91A2BAE73DFB66F
-:1075B000EF5E007875FFDC4CD83E02250C2A17CA16
-:1075C00078FCA273DB776BFE0C7626BC4CBF5FB6F3
-:1075D00086F607FB7A533CFA033D5B13F2D19E7C9F
-:1075E000FD9EE92037CA4087819DF74A7AA0818EA7
-:1075F000772495D58F6C1E88E709AAB6DA31DF703B
-:10760000DFB6D76A41FE77BF120FDBD1E42B39F426
-:1076100037A87B772690B52ADA81AA5EDF56104913
-:10762000D5DB79555037E4BF10F4D3311E47E9B9A3
-:10763000AA2D01CF8FE8FA717EF665B1F332C12C25
-:10764000E03B6A4F1ABEA3B55F9F31989FEF0DFFD5
-:1076500084DDAFC0FA7B957029ABFBB318DF766091
-:10766000FF128D5E797BDF7159FF3919830DFDB4EF
-:10767000F76BCDA42E161F546708FC7CEF5F87C5FF
-:10768000BACF22C6FCF1F95D02F199C00ED8620DA5
-:10769000405CA35A090E85FCF65715B63F52ED081B
-:1076A0000E85FCF69D5CFE55C7D13A7D9EC5E7016F
-:1076B000FDA14E2CA19701DF35AF5909E427D5BCB8
-:1076C0006E77039E6B5EFDEEC8738590CF168F714B
-:1076D000AB9AD7FF1DF15F630ECE06FA0F6F3193A1
-:1076E00075B47FD796B773C08EE89283394967D84F
-:1076F000F7A969311BF6B1B5751CAB0F9C07E7D72D
-:10770000B5738B95FDC88B5D19CC1E5D91E17E3CF8
-:1077100003F9DAE644790DE389304EDB10FDB9E672
-:107720004A35B61C6BCA900DE768C5C839C526181E
-:10773000F72B125A9A455152238471FFBC72C389A8
-:1077400091E00F7FF6B30B715FEB33253C12E4F64B
-:107750006739E1917A797CB4DEA24A32C625B0EC71
-:10776000597BA2348B40FEA075662CF9B439231ED8
-:10777000E751796F7CCCF3A03B38BDAD061A4C6560
-:10778000DF853884F6DDCF948002F3C8CB54B1BDD9
-:10779000323BA0C0F3AA0DDB8718EE9D90FCD88F7A
-:1077A000F217C2A382AC540A6D7DE54AC5229B2A1A
-:1077B000E1F968E93F7BE94D8CE009839C90A7C61D
-:1077C00071483513C641B5F300925C6C017829A469
-:1077D000D82989806A3FF2691C69C1D246CD11A6B9
-:1077E00087EA08E4151DE5FBB766497D1CE4877947
-:1077F000BF88F2FC6C70FB558603E76D96EA880B38
-:10780000ED8E694EB0AB059F87FC40E9A1A17EC318
-:1078100090C36CFFDF0DF9700EC2E6E770BEF53D58
-:10782000D80794CED0CFF65D46020DF47B92C2EA23
-:10783000642209C4DA8FEFE27820BE3D287F6C24F1
-:10784000F217A6F5789450F4BB097F1B0B7EAECDE2
-:1078500049826037C5DB48309E96B63CE9989E7FEA
-:107860001D84D507537206B9E6BCC4D81E4DD7C4D3
-:10787000259DEA958B22BE7F2AEAFD53677A5F83B6
-:1078800087D73224979D7F677089E36BF04D749D95
-:107890000E013CF21DAE06C0A3123E700FC023DFE6
-:1078A000C6FCC49446A2F7E38664327975BFC0F47F
-:1078B00025FD2BB6E9C6234E0BC64F1FE270EFED38
-:1078C000AFC555FAF4B74A00D73EFDADFDF58F8B35
-:1078D000DDDFDEDF7CE263CF27B19FF17DB1FBD737
-:1078E000BEFEF17B41151E32B9211193760E7A4806
-:1078F00026F85B0907D24A1855B07D8228BCC5011D
-:10790000FD517A883B4FF71CFE2F4F87BFC131F0E6
-:107910004F824877257C3EB46ECBA4F3BB994F775A
-:107920007233DBC7BC75218B23DD7C2F3B2F74F0BA
-:1079300067ECDCFEAD8DCCDFBE7511DB3723E5ECEB
-:107940001C9093FE07DFBB0D06A1F8BECD2F04826D
-:10795000B9700F4E94FDDA7BDFCE5D12F42F898A69
-:10796000C768F4A49D5B9AC7EDEB5C4E9F0B48D8AB
-:107970000E7C1F7D8EBE3583E5A55177CC0DEBBB0C
-:1079800085AF4FD303BE156438DC0B209AE25CB0A0
-:107990003F22F273ABC4A1B0BCE5EB930CF2E7E479
-:1079A000703501F41D79833FE7F711DD71859AAEDB
-:1079B0003FE7259D8EC7FB471A645706C845F9F473
-:1079C0005544A57CA19C1E4254DD39346ADF21B3A5
-:1079D000CB4E82711CC9594CCAC02E4CE4749672AD
-:1079E00065AF1DF63E85CB1D2B543C077B5326D33C
-:1079F0002F0F67152F00BA101D635D1E5B5FBCFA69
-:107A0000B6B1F535C0FA72FBCEBB4171B9D00EBD2F
-:107A1000925A1018EF7159603EA259FD5805FEFCAC
-:107A20008D4CC0FFEF0B0786CF93294901C87F9982
-:107A3000EF78F800D0EDF27A27EEA32DAB1F8EE59C
-:107A4000C3F51968872EAD7761A9C1C5E2F2BB45C0
-:107A50000A67CB796C3C8BD3C3EC0CAA8720FF421E
-:107A600072D605A16EC9AE2360FF5A7BE1E347F8E9
-:107A700028BD750FD6CD50A7A5DC380DE14BDF270B
-:107A8000651047CDF22C07F858D50B88AAA30B73C5
-:107A9000C62843BD0FDC34FAD8CCE0F7A8C0E823F1
-:107AA0001A7E8FCA1D2AEC3F3F7A45EFBD36083F4C
-:107AB0006AEE33F8FD9AEDCFF50B3F6712DAB3F3B8
-:107AC0008B96CE6EA08F1EE1FB900FD68F45783D32
-:107AD00004795DC3C03F70632902FC281D99F37CC3
-:107AE00044A4EF9B553667B3ADD86D2A64B40BF050
-:107AF000136D0C9EE68C3ADC8FB3D818BC449B0FF8
-:107B0000E122DB18BC441BA33785D72580DF687CC6
-:107B10001F9F53F8B5668E013C8C37C04B4999784E
-:107B20006EF05B45E147E791C2F92B1A0E29704EC2
-:107B3000212FC257FDD9754FD1F5831E7F86C2070D
-:107B4000CAD47EFCC7D42C2647534C757B6480472F
-:107B500012E1FAC547B28B084B5584BF0C1F51A1E7
-:107B60002EB0799066235E45A71475EF9BFA0CD072
-:107B7000C1CAB76513EC938A8BAE329C271567BADE
-:107B8000135584A74700FDFC48BD8AF85B01781CAB
-:107B900006FA91F9630F707C3E087C82F865FCF16F
-:107BA00028E797C7399F34B8D8F989E553595E5605
-:107BB0004A8189DF871624FABCA744570B51E8BCD9
-:107BC000D0C656B10CA29DF18939703E7D2F3E8FF3
-:107BD000B8814E123FB93B806B25C599601725725D
-:107BE000FB975CA226CEC283B44189F9215414A22A
-:107BF0005FD3618A750F56836BAF05E2A6FDCD6733
-:107C0000CF8C57912E4B2FC2F46092EC299EB580F9
-:107C1000D66D8DF1181F8C77798A1E003E6FB423C4
-:107C20009DDAE8FCCB74788FEF07AFCF665D61CA51
-:107C3000A2742882D146F1FB44E3102BC0F929B984
-:107C40003813E4EB535CCF521CA8FA7DA82E2E27E4
-:107C50001D851718FCD995B21BDF735E6294032B48
-:107C6000B9DC4D9A6CA4774DEE7ED42B773DA930CC
-:107C70009FB4D393911F53AE8D2D7F1B64C507F71F
-:107C80000A348C64FCEE2B51D0FE8B210F30AE7D7C
-:107C9000D233741DC8538DBE9610267F7C24CE85AA
-:107CA000FA88DFA3A3D9C7CBE0BE412E67A114CFCA
-:107CB00053906ED26E35617EDE727E5FD66394BE67
-:107CC000A0F453FA82F2D22CB69FB1C4320AEF6DFF
-:107CD0006BB099505E489F9A0336B057F78C734249
-:107CE0001C41925D1D6E8807DAA5967504FA155A37
-:107CF000E03E0921B1D00974F0AD7DFEA033E5E18D
-:107D000051740A4047CE946272280F770FF05CB32B
-:107D1000ECBC96405CF199943A2BC02D2F8BF95D09
-:107D20008D254508470ADF8959A99171D2675ED927
-:107D30007BDF160CFB4C3FE7A3A767713B3ADB47A1
-:107D4000CED3F17BA3C0ED30D54786EBF87EC9F9E1
-:107D50005308EC2BF5E5F77EE4D97A26CFEE1762CF
-:107D6000CB33CDFED4E4991C2527B472E9A0A986B3
-:107D7000F35D4A8A0B68174A9F89A248F25DF4E8CE
-:107D80002D890887790007927165AF5FFBE3C160B9
-:107D90005716C5A4B7683936BF57AFBBD3004F4796
-:107DA00065357D16D0D3DBFDE9757729D2A17F80BB
-:107DB0000A7A69CF1357615CE7F0137615E450D95E
-:107DC000E987503F949E1E876579E315A8CF8527E4
-:107DD000AF2E027AE86CBA3CFF5388F3F8EDA8B7EF
-:107DE0003B1B270DC5FD487FBC0AF91D9D8DB4BD09
-:107DF00030D20EF9E2A22E5F8040F45D77FE9B1434
-:107E0000AA68976AF79E51BFCE311EE242AB453C4D
-:107E1000D754FAA4DD0DF6677FF457DA143B1E0041
-:107E2000BA16E2AEF483C3C18EDEE3181F0ED27120
-:107E3000E7AF63FB080D8AFB4810ECA627ACB80F30
-:107E4000D99014FB5E900559972F0739B020CBFDD0
-:107E500014E2C9C6EE29ED9F1FD8F78FC02633EC78
-:107E6000633DCBEF47913C8E19867D36B68F758486
-:107E7000C75988A59FF638DEAEF6D3EE60F922C466
-:107E800019BB5DF333E2237E460BACA3A6F1F8D217
-:107E90004F115EDCCFE0F33E2AB3791F7DC11C5841
-:107EA0001283FE8FF2FC940A81C157E383A3BDF6CF
-:107EB0009107EFC389A65361DD8867C6D171BFDE24
-:107EC0002FA3DEA8A6F48574B56E1CE6C70B4F8CF5
-:107ED0007B1CF2864FBD23627BE5692BB677DDE71D
-:107EE0007A06F29EC2EFCA04E4D3A9FD9727B03800
-:107EF00091318E7DDB0026170E71F9507AFA11A4AC
-:107F0000DF5E3AF12F5080FF4A4F3FC6E87B838007
-:107F1000F756125FF5BB13CEE3F4391EDEAFB87A25
-:107F200009C0FB123FEE9394AD37BBC01E88C6F369
-:107F3000A12CD510F7280B2DC77109B5BF5274FBC2
-:107F4000E947799E71D969765F2171FA4806F00395
-:107F5000974F113A36DE43DB658D1DA73FC9ED9F74
-:107F6000D2D3171BFC8CC8FA2EC3E7A55CFF9785FC
-:107F7000C6613DB29E67C6C55A4F641D9760FFAE8D
-:107F8000C4D8DFCFE4703E525F4EDC54BE952BACBC
-:107F90005FA9FF2E05E44E69536292A05B575963B7
-:107FA0009521CFA3ACA94499AB1B378287A5EF4E8F
-:107FB000902278C87C6EF1D54B6C601714CB03808F
-:107FC0009FD65514FD5485F1987CFA52F6E780BC93
-:107FD000EE6CBCD311EBDC44E68028FC3472FC5020
-:107FE000BBBA50871F0D2FD1EF1F595B56F4538832
-:107FF00047AF62B790F42F7FA2F0961B1B6EA37A57
-:10800000E1361CF38DCE0EB70B0D79457DE0C6F140
-:10801000ABC1457B4EEDA80B078C81EF11767EA797
-:1080200091E1FF6CF08A7C97E37F42EC75CCEC5DCC
-:10803000C722E2A38C3AFFACEBB887F82C675887CD
-:10804000867FF28201FF339F5B8B7CA8E17BFEDEA3
-:108050005548BFF3293FC27E7FA7FF2E47ACFCA245
-:1080600099FDE1FD3C1FC92BFABF87F72F655F0E15
-:10807000E495F95658D11F39BAEE911C3D9C17640E
-:108080004DB80DF0429A53CF497FF826BAF6837F58
-:10809000E97B42C678DA962C4F19BC5FCEFDF0FB27
-:1080A00013A70C8D651F3C50BF7F04C4E91AEA3B3F
-:1080B000B094B97D49C0BECC457BC91DEB7EAF6590
-:1080C00003985C79A0BE83C53D2D3EE2D49F272650
-:1080D000CC7EFA4FC2E235DA7B8AEC7142FC54E185
-:1080E000E79D65C9B32CB710E21E29053E1DFC961D
-:1080F0000E60E7919667EC75C2B962331D1FE239D5
-:10810000966CE9A4719F93D50B844F45C86F965325
-:108110005A08C643F3E8731DBC95940E437C3A1A83
-:108120000E92C581FB4D1261F69CB67EFA04F5D223
-:10813000835C2FADE471CDA7EB5B30EEBF24DE8115
-:10814000FA6FE92013F3A72C12DE57634E64FD95F6
-:1081500004366F2BC4BD45D0AB41ACDBE1461F11EB
-:10816000AF4613A09E485401EAC924B814EF4999B8
-:1081700010FA093C7765780280C76F333B0E081010
-:10818000C72EF60C03FDDB28FA0A54DAFFE762B8C3
-:1081900000FAE5D0A64F92583908F2A13DBA7D2DDC
-:1081A000764FA8AA8F0B46D7072D92A2F67BFE32F8
-:1081B0004CDFBE22C3FD0ACCA3C1CAEE194AF95C4A
-:1081C000C0FD9C062BBB6FA8C17E6302E8F15F0F68
-:1081D00060763BD201D0D17E66CF9C94D4842416A5
-:1081E0002755DF30C4F92DEA1BBAEF48DCDF6BA658
-:1081F0007429E9F655CE93DC26A09BF3FDF4B97EF5
-:108200009E31E2714936BC9637E67E8E363FC8DB3A
-:1082100007388AA7A7A0BF164D0F3B7BE3CC3E11C2
-:10822000F0394BBBBF58BA9FD51389F687FED7A745
-:10823000BDF6E8FDACCEF739BD73D93E66434902C1
-:10824000E6C769F398D5FE6007D8A9B3DA33E7C16A
-:10825000FED62CDBD02FA0DC2987F7C6831D7897AC
-:1082600080E74A6EFEDD1B723C2DB77DB80ECF3322
-:108270007FC1E5E96C12C67BE13DC4C9F7D903F8BB
-:108280007C2E71F17A8B0C7EFDADC1C00D57D3DA17
-:108290006D6F04AE06B36DF6FEF09B20063C2DCE4E
-:1082A00029B887A0BDD7E67A8BD5D97BBDEB972CB3
-:1082B000B89EC87A2DB87E6D7D74A608FF5EF8F072
-:1082C000FB9A34788873E9BA29BDCC4AB8F14A726E
-:1082D00006BB7C966DF8176CD384CD271A3EA7A0F9
-:1082E00089DA8F5D03DC249BE2EF0F03DC0294D577
-:1082F00096708E3418F944867AADE81904A9CF5FD8
-:108300000DF40C4B053874249F93FC3C6065FC7F96
-:1083100000E819F2BC4EA7E0BAB47BE8F7DDDD69EE
-:1083200007BB73E9B68FF19EE51A31F4E84D180FDB
-:1083300015D16F3AD93AEC8CE7CF0E409C8AEABF50
-:1083400081D9DA394BB6CE3912E39339ADF1988F32
-:108350003F679168B8477ACE2296CF47A48EFCEB50
-:108360000DF6FAFDFD8E03F182E871E62D9A443E8A
-:108370001F0DFBB4CE09183F58C3E86BDE64B70885
-:10838000F9CEE39709B8DF3AEEB0DA16A2F57981B3
-:108390004417B0E7BCBBFF6308DC7350DBC1E2816C
-:1083A000E9E2ED05F7419C652FD3E350BF1DE8C41A
-:1083B000E6566DBAFD822EB9AE00EEFBF3DD6673B4
-:1083C00003FF975CEFFE14EFF3E5F10A4DAFBED665
-:1083D000588279B225B7AA6301FF252D5637961624
-:1083E00022C551395622110B94E90A91AC50C6119D
-:1083F0000B94454BD8BDDDA58D33D03E708C2D56EA
-:10840000E03EDE92F617BF81F7CBA4E01E763F0573
-:10841000834F49FBDBDF035E17B88B319FF1C20D41
-:108420008AC10F1CD962AC5FD466AC17048DF5D13C
-:10843000FB8DF5F5D904E968AEE5BA3C80D7DE5D81
-:1084400066AA8B20FFCF8CF92E8704861FDF462B70
-:10845000CAC34955ED45E0071F7FD96E023F7AE751
-:108460005F7F89FBE1E1CDF104F2ACF6FC3E8EC406
-:1084700041BEE22BD675D05E457107F1CBAA57AC51
-:108480006BC10F7FF502CD8F0FE4C37A5EFD1BCB6E
-:10849000AF096F3407607FFCF8F6175F86FDB4E321
-:1084A0001B07A07D7548F099E2E0FB5FB2F8678892
-:1084B000DF1717E2F7C5556D30FAC5776433391306
-:1084C0005A7271422CBB492B876724E74DA673EB88
-:1084D00079C83C07E240C31A8D70D1FA8D08189F05
-:1084E000DFC3C71F4F94089DE6429E40A0C101FA1A
-:1084F000F7F9D8F7242FE1FCF3D24BBDEF89FC9EAE
-:1085000038A2EACE4D45E437593800F23700FE83F1
-:1085100023CFAB886E3E3AFB642A1FFF6B0BCB6701
-:108520004EE1F7F71FABDF8F7ABFD7EEAB77BB27F4
-:10853000EBEAA58D7BD24AC07F6ADA93365707AF44
-:10854000EA8DFBD26EC1BC270922B8A47AD60B8F64
-:1085500041BCA27AA3D802F38476805B57CB9B0EF2
-:10856000E847EDE151100789D8A397BB27EBF8F84E
-:10857000EFA55B8DDFAAB9FDF2DAD88E2990A75E50
-:10858000D528B8A05B55CB0DD75D0DF06E62E75CCA
-:108590008B24522C52FEAADE72C35523216F66F53E
-:1085A0001817CC870E713D3CAFDA7402CF333C1CF8
-:1085B000F5BB075AB9239BD985B47FD044FB3F7CD8
-:1085C000A3AD1CE4171DF70DA8EF1DBE0EEF5771EC
-:1085D0001C65FB0FF4F927266AB71C9DE87BEF1694
-:1085E000FAEA71D2F2D1D510576A34D223A56F01BD
-:1085F000ECB2F07AC1B50E9F2E29BA164C6EF76216
-:10860000CCF7A5ED73629DB7AE0818C789C6FB47C6
-:108610007CBEF46FB89E7EA2FB254FF3613E79F5D8
-:10862000222A0F757182EAC37EBC5F32FA3B444F47
-:10863000D7CC9E202AC8C3CD2C6F86FE0996229ED9
-:10864000A73B84D5F15E45A0534A28551790C92A07
-:10865000C0FB5A3215CAF12057E03EFDB12DF9D0CA
-:108660007F87107AE1391CCF8E72BCCB19C47B2670
-:10867000B3F839D32E95D57B789C536BAF6CB7622A
-:108680009ECDF1AF1494B38B5BF6611E7DD7CB56B4
-:108690009389CA83E35B9227423E66570BBBA7F8D8
-:1086A000584BF244E50C7A3B5A6E68FAF420FC937E
-:1086B000EADD3F67BBBFCD063D753FCB574D4FAEA3
-:1086C0002B88F5FB17DA7B294A5D01F831E1DB6C79
-:1086D000AE7508275FAE8471F00C17E40995086C3D
-:1086E000DCB841C5E240DADF4EFB423C3A69BF8864
-:1086F000BFD7F0B9E8FA897308DE278F76D0FC423D
-:108700000FDE4F49EE677995F324129428BDCD030F
-:108710007D948F7594CBF39A04CC2B9BBFDCB81E51
-:10872000B82757AF472B4880DD6FA18F230E867C7B
-:1087300017AA6FE05E4B0BCBBFA86C36BE574582C5
-:10874000389FEA4D3F9863C1EB1BA2ADCB9D0DEB6B
-:1087500012AEB5E0BCEE7C2A81EDF728C40DFA34E8
-:10876000FC941DE57B15F1E0783773BDEEBDBBC40D
-:108770003D1FE4F0A279EEF9C970DE96E93F74F985
-:1087800090BFD9BD5B5593497020BB7783805EADA8
-:108790006A178223A16E213EC728F61CEE1F807542
-:1087A000EBCFD794133F7EAFBCC9F89C7CC8F05A7E
-:1087B000CDCF3192665DFB60B0CF183CAA37990DE2
-:1087C000719DF19B049F1DCFBB061AD2E8FC6A8FF6
-:1087D000525941204FF507B3617CC8E719837A9F4E
-:1087E0005829DE9EEA95EB8111B1F2FC0F70383EFC
-:1087F00075436926F0EBE360B76671408F45B9C5F4
-:10880000E3072468A1DF891BDD5BC7F6A225AC3E28
-:108810007DF50BD31B2FA17E9EECC17DA17962F16A
-:108820005B701EECC5419E6B013FF34CEE1C09F9D9
-:10883000D63D14E3A18B181C9E195537A22E861D18
-:10884000A8E1F969A12508FBB2BEEDCCFEB21786FE
-:1088500065BD7EAD1EC8E451C2DE109E9B086F133D
-:10886000F09CE52AE1209E475C75854AC0BFCFA0F9
-:10887000780279BC4A20F7C37D5C85AD336E7F13E7
-:10888000F05C18E7829FBBA8699D20D6D870FDCC0C
-:108890004E8BAF5B0BFB39E973868F023AA7EB9ED9
-:1088A000732D7D7EFB4015BF97696378CF58E2CB6F
-:1088B00085DF814AD85B7CFB9BC08723E3F09C6CFF
-:1088C0003A85953D09CB65607F6590C502F47BCA0A
-:1088D000C1C64F35897366407D14AB27DD2BB8D7F1
-:1088E00021F1ADC0F1D3CD642ACC139E831D6981E3
-:1088F000B802B607187E27D515C078E9435899A263
-:1089000004B3619C777AF1ED41BF6221D7630BB765
-:108910004C48073FEF9D2EEA7053B9F54E86660F1F
-:10892000056DF8FB50E70D67FDB95FB8B0809D3766
-:1089300048C931F6EB91DD09A3418E7EC0ECF853B6
-:108940003637C6A72F5662C7B39E1BC8EC16EF6911
-:108950008104747AC03BF35BB42BBDA725C3F3AE8F
-:108960007A8B21CFB9BA7C2F9EBBAF211D98875D32
-:10897000D3126FC8DBBD382EF67735FAF69E16890E
-:108980002FE67715E3F3D3C9C4971CAB5F9AF1398F
-:108990005D87A1DEF65DEF3AE039191B72803F3842
-:1089A0008DDBB53D01934FBE2882976E67C8A077D7
-:1089B000BA5556EFE1FB715ABB367EF74C859F2BBB
-:1089C00062F72A037C7CC30879B6FD04C6A3ABDB3F
-:1089D000F74C61BFEFC5E8420F279F4E7EA4357468
-:1089E000044D94B77F3BF0E86379232889EDD5F8EF
-:1089F000F8D8636ECAB769A2C9C0D7F185BD7C8EAD
-:108A0000E2E52993C8E5C2F1C7265FA2AFB3FE91A4
-:108A1000F7BBA64FA6B67D611E7BFF8F03BF7A6FA3
-:108A2000C97911B944D791536CD7D52D51751BAD68
-:108A30008FD4D59D51ED2951ED1951F56CD6BFCB91
-:108A40001ECC115D84740E3C315D1A07FBD8C1D970
-:108A500070A3C0F286AFA74FA6F59AC20ECC9FA90D
-:108A60006D175CB8ADAFE5C7BB989D657385F0F732
-:108A7000ECE20B3BDE023950DD2638054AEFB696B4
-:108A80002D9857530DEFA9BAF75A98DF59DD721098
-:108A9000DFEB77FCE126E4E787871FC27EDAFED1B1
-:108AA0004DA4F7F73A4E0F043CB674323D1CB57F27
-:108AB000D49DE9DE87F230EAFCAB17C6B545E85E27
-:108AC000EBFF8791EDBF8361E2179E582CD1FE7FAB
-:108AD000AAE91C03F612DC710972FF69213002F465
-:108AE000F3B3C43302F4D16D35E7EF31D17E07E43F
-:108AF000D06AB8AA61688EF51A89CAE903F6D0402F
-:108B000081CA92E16B92AF01781E480DE10D0D3FD5
-:108B10005B93C2DA078606C2BE6B5ECE8F59FDFC40
-:108B2000D06AA85FBFE602561F191A28D2F707FBC2
-:108B30002EBC06E0BFDE199B6F07E63079AECD6F25
-:108B400066813B2307ECCD6AA62FE0F8A585CAC550
-:108B5000D995C736AFA77098FDD3789457EBBBAEC5
-:108B6000BBB218D7EF2B863C3776C53BD767289723
-:108B700025B4033241872545F061CFE95051DE5FCE
-:108B800050B705F47EFAEC3C94F7A7B2DDF53963F3
-:108B900022E59F87B0B23E879DF748174D986F90AA
-:108BA0007E8F1DEDA0C7F97E12E51BC4AF8DE36378
-:108BB000540E937FA372989F9435F0F27A58CFCDDC
-:108BC000DC3E5DF95060A395C2FFF740242918DF11
-:108BD000467BF796B5546E24403E853B13E4C12D89
-:108BE00010FFCD8BD435FB7D6501ADDB227EDACA6B
-:108BF00019EE4C7D1ED0CAB5AC5D93372B73D9FBF3
-:108C00009ADE496F60F0497F7CC43A5847BC44F013
-:108C1000FCC5829943D72D46FD7D2DAE9BB8DD99CD
-:108C2000E07F1FAE186C02BB52C3CFA202F7345CC8
-:108C30008FC8F2D5353C69DFAFE7EB9E2752FD4F79
-:108C4000D7593FC883EBA7F6403E4B2E60F6403D18
-:108C500004625323F02552680C3CFF5F04A7DBA19C
-:108C6000FD1F85530C79F133E857B388CA0B934E37
-:108C70005E70F83D2D04E5F442DDFD25F439F88100
-:108C8000370DF43C90A3DBC7997D4F0DDA7FDABC3A
-:108C9000E2FFFDB5A93791BE7C166D9F1DF8BD653D
-:108CA00039C6019516948B07AE24AEC5203FF8BE99
-:108CB000AC665F16FDB4EA1DF0A34EE688F89E553B
-:108CC000C3AB50BCA594C2E921AA56E13CBA6F06D9
-:108CD000CBEFD1F4E64A7EEFEECABB2FC43CBF1EF9
-:108CE00012C2DF65F38D2528FF7ADB670DC5768A12
-:108CF0006F9F15F8BD220E7F77606501C173362B1B
-:108D0000675D80ED3BB5B8D22C0B7E67E50C464F16
-:108D10002B2B581E26E811805B7FF490D6C0E21BF7
-:108D20004472E7EBF301DEE5F88B2F0C6DFB18ECDA
-:108D3000CAE556B42B4177E2FE883F1DBF47F1BA22
-:108D40000DE599E6473D99C9EE9B252EF4CF1FB45A
-:108D5000BB4B505EDD17AFC2FC9BAC64996514B889
-:108D600023E47E947B7C3EC4FF0CE679CCE1F6DA0A
-:108D700067E527ED600FBCC1E50D100CF8CB73095A
-:108D80006B9F7B6FFC41F06FE6DECBEE9B25CB2E1D
-:108D9000771BF73BE85CD3203ECEFF1AC376808377
-:108DA00007DE73C0F8FF6987FB4C3CF7B2F3BDC424
-:108DB00047DFD7E5437F0CFC0B717691CD9FD4C77D
-:108DC000ABB1EE05FD98CB773A7FB7FE7BDA77A2A1
-:108DD000C7A5FEDD2740A714EE41380716BE4FE4B5
-:108DE000BFD76A9C6F8A127ED44ADB67D78B894BC8
-:108DF000283C3D8BECB85E6DBE73D2C397B2DF8565
-:108E0000358E7F24BEB608E2E19A3F42EE35FA6322
-:108E10001097E8AD8B98278D7E4D9FE7DC9F8DF6F0
-:108E20000309F99B59DFAFF79C862A44CD9FD39560
-:108E30002A4880370FCF5F5094F06CBC572A6ADE07
-:108E40001A3C9541260E774617D1F05606717A885E
-:108E500082778A121A08E37A1699114ED1E36BFAD7
-:108E6000F1192BF1811FD9280848AF8D77C7A3BE10
-:108E7000231686676F659C0AF4FBAC12C63C27DF9D
-:108E80000EF6FBA03DD6F0AB28B7CE63F1869EF779
-:108E9000C4B5D0AF3B95D17DF77699F31B61F74C04
-:108EA000BC27AEC376818DDBBD381EF3A7E07CA85E
-:108EB00002E7367D7FAE87F88BE6E77FFE2ABB6F41
-:108EC000017ED747EF27C3B9DAF25111F981F7C70D
-:108ED00000BFB7C5F33892A702BF774B1C813C8D0A
-:108EE0005A938079BFB59517E03913C2EF79AEE692
-:108EF00053AB35517F7154440ED49A0E0D057FABA0
-:108F0000DAB21CEF7FA6ED6F809F063FC3DBFB3B11
-:108F10001FB97DF150BBFCF85FF1DC7BAB913EAA41
-:108F2000237484E7E72AF574951BA117B4C7418E13
-:108F30004C26786EDFCEEBF1533B0210C7F1F2B84E
-:108F400046EA5E76AFADBDB085405CD57B94D92353
-:108F5000E3DBD7EE03FF38716A077864B43F8BCB4D
-:108F6000459F2F1AD7BE4204BF4FB363747EE78874
-:108F70006B47EA4B761E17FC58F85E081E01FF4847
-:108F80004CFF3DCDF51FD59328AF17F887A19E0460
-:108F90003D06724EF38341EE819C7971D0C45B072C
-:108FA000A5C27D86136F1AC4F66946A0DDEF3BB7F4
-:108FB000FD28AD1FF8C3678E9731B8855725303926
-:108FC000023F100A71E4DFC86B1FC6F949ECBEC648
-:108FD000D5B92897B5384E358F6395F2B84F298F9C
-:108FE000FB40DC559F170B714D7DBD9ACB851AF860
-:108FF000BD29BC4FC01CC98B8578CF6412B4433BDC
-:10900000C47D1CECFC9DFE7D2F094C9290CE7F30E0
-:109010001BEECD5AC9D63B87E37D9595C57BC6DF50
-:10902000BB5664412CB6DE8451EEDC070A23F77789
-:109030007DC1F1A4C1256ED0C412807B9CC8EE3FD7
-:109040000F3FC07E0FFB30D5DF5B783CE45A1B9EA0
-:109050003F769F07790B9233E7DA18BFEBFAF00EF1
-:109060002BDEE3EFE7F2487B3E6510CBF7C5381106
-:10907000C07D713CDAE114CCF940474583357D4A27
-:10908000F2213E7590E77FD6DE68F3C078211E3767
-:109090005F3D88E98DD583D8EF3F68F55EBF8FD3FC
-:1090A0008BB6CF05F11A7D7CBBB9B73F8BAF68FAA1
-:1090B000F7E98AB8B5ECBE778D6E4D78BE323EAF1B
-:1090C000588138D30E2E474AB83FBF033670419EB1
-:1090D000B4F0B8B4E49C0DBF1BB4E3681EE653A61D
-:1090E000284CBEECB8398E407EDFFE632F3DF21E69
-:1090F0006D3F7954C1FBF2E6F378EC0EB8171EE42D
-:10910000E53633C619AB15664F56EF1EC9EC18C5C8
-:10911000B30AF2BE7D5B658C7B553B021B5FC0F6DC
-:109120004C17C52C9C176576F0F678F67E5CE01738
-:109130002F835FBA3BDDE5A3FD176578F6021F6557
-:1091400099D504A2EDBB0A91F3A48702CC6E3E042C
-:109150008207BED36EE7BF33E0CE5C40C7F9FCA107
-:10916000745C0F95B7685F7DFE9819F7D59EEEFD8C
-:109170002E8B8F1E928BF13E9943DB0A5CD4F32435
-:109180003DC54A10E2DFDEC799BD37CFA4AE01F876
-:1091900090DDF12E83BFFA5819BB5FA2F2DEE967BA
-:1091A000DAE706F9AE8FFF7693700EFAABE5835BD4
-:1091B00020DFB4BB7D848B6D6765E0264A2DDF7FA1
-:1091C0003E2C33F88677C948CFE73A3ED045EFEFDB
-:1091D000E089047FDF4DBFDF16BD4FD1B7CEF0E889
-:1091E000DD91CEED3A63FB75D99E53C06FB54F7CD0
-:1091F0007760910ADF0BA33C247E166F3F2CBB6780
-:1092000003DD264E0E1AF2B86C2AF70FCCDCFE23D3
-:109210004145CF875A7BD14412735FE7FF002E3F51
-:10922000E0290080000000001F8B08000000000003
-:10923000000BC57D0B7854D5B5F03E73CEBC92992A
-:1092400064663209931739790792C01043448B3A08
-:10925000090103469D002A5A8BC31B943C046D638D
-:109260004B9B814408881A2E01010127084AAFD878
-:10927000062F20D64807448AADDE3F3EDA8B7A2F90
-:109280005F508A6805225A7EDAABF55F6BED7D92FE
-:10929000394322D8DBDB3F7CB0D967BFD65E6BEDAC
-:1092A000B5D65E7BED9D5855622C91317B37F385A9
-:1092B0008A18FB067F6EE84F635503953336C5CC9D
-:1092C0009218BB96F19F8CD350DFC6984D55191B51
-:1092D0000DDF4F874DB3209FB1246C9A2BD200A491
-:1092E000278D2C6C298574A33DB42D135BFA18F6D9
-:1092F00033770CFC179ACE95598BA504BFABFB7B3B
-:10930000DC8C9DDAEBF4AE82EFECAB6F6456C6D822
-:109310000C26EA9959ABC5C5D88B2D52D802F566F3
-:109320006C306FB3427F65CB7CB21DF2BD5B24EF26
-:1093300036A837A3A53C6F23E4EFDD53EC95A16974
-:109340001C8E83F990332443FD6B1BC7B18FAE6233
-:109350006C96396452E03B7B4E623B18F5DF82FD30
-:109360002F8446C92597E261DE063363163EF76F08
-:10937000F09F50443E0BFAEDEC9019CC97ED84EF42
-:1093800005FDDF172AE183521C63B59D51EDD9DF3E
-:10939000CC7DF5105016243CBB4DEC1EBF8D263DF8
-:1093A000A4A698B13FE27F93198BC9F05FAD121D5F
-:1093B00072864CB6C3BC2BF8BC7A774B84D75AD68E
-:1093C0006062D84F7B0263D7448C6B61E158484F91
-:1093D000C9412A9F6B5E4369B59A4974BB97F5985A
-:1093E0005836F6DB6BF2170FCE07D597E1839B0556
-:1093F0001F2C3CCDC2D7C1780B97B070ED089EDA18
-:10940000219DABB0601CE0752EE0205EA431251CD0
-:10941000AF6A413F5E1684F479C4A71A8167C463BA
-:109420006479FDFE6FCC91F92126C6ACAE7E3A037D
-:10943000A108AE21E31A4635009CD72E09C90CE6D7
-:109440009792EEBB3107BEC796F2F9D61FB358D438
-:109450009198F7B32CA8F7655AF90BB930DF7A85E4
-:10946000F93AA13C16F0D201DFB7585910FB7F2A18
-:1094700097CFD763E2FC6B54FC6C940DE9D21D3698
-:10948000205D129903F951C3E7163BB42BC1761244
-:10949000B5EB6B6F612D3111ED2B7E65650CD6CB75
-:1094A0008597EC213354654A20C309FD257D60660C
-:1094B000AB207FF657F6F9D8DF59239BD609F5DDA7
-:1094C000326BE8247E594EF4F919D23511B9A9222C
-:1094D0009521EF4B93529907CB97D178B54EE0AFDA
-:1094E00001E8DB579ED97D3BE72BB3BA0DC6BBE045
-:1094F000ECF921E6011E1684FC0F91CE88973DE31E
-:1095000046FD04BED7FB6D5E8EFDC028E457B3FC5C
-:10951000C0ED16E0AF09F292DE87601EB5E936872E
-:10952000199A5466FCE71FEE84FC277B8CCC8C7464
-:10953000DE316E1ACBBA140E2D5D10327ED813B107
-:109540005EEEDBA9CFD776EAF3F54CF9B047E3033B
-:1095500040C116D5EE3E5548B2C3FB0DF0B7D9DC7D
-:1095600070BA03E035BF6CF62E85CF8BD4C0365C65
-:109570004F7586DE23886773C667230280978A8CBF
-:10958000AF8EA422FE7FCABC08F7056BF90CA2C7F8
-:1095900046AB1A8C905FF582FFDB87565379FB262A
-:1095A000B32AF1F2EAD120B7E6D312A62A1603E0D5
-:1095B000BF7EC3C44FA411546E417AB4039F52BB03
-:1095C00017A4D05268377FC3BC6A06E56758C864E1
-:1095D00001783ED1F02C774DB0C07FDB5D55C35094
-:1095E000BE285F2B7EA4FF0AECEA9A7E7CFDBA6F50
-:1095F0007D5ADA4E025E6E62128BC7793B03BFC69C
-:1096000079D65A7A4CE5D0CF0D5F7F4972795EE307
-:10961000ABD927AF4279E39B41F486F9A11C99F7B6
-:10962000D041FA2E4DB6107CA7D26D21337C7F75C8
-:10963000A399E79D26CA9FDA22517E5EA714B264E1
-:1096400062FD8B09E528BFB7181D6676299EA2F139
-:10965000F2F1E6FF886300F2C78C55E1FA628E866C
-:1096600038BF1DCB1AE2261723BE6EFC04E5D7BC1B
-:109670002DB2378C72FA15BB3797617EFCB0393644
-:109680006CFF454239E26FEB78874CDF653FCA21BA
-:10969000A6F8BA6F80EFCAD6AB555C2F87B770B803
-:1096A000E7392DCF209D6FF85A26FE570C2CB0DBE2
-:1096B0008674F00DC375A76EDE3101F1FB714D8A22
-:1096C00081EA3F2F3107E2C3D99884DFE7498A1F37
-:1096D000D7D9FC0D0BAA595C3FDE57A932AD9BF2DE
-:1096E0008C25493D36E2FBDB51DFD56E013EC7F1EB
-:1096F00027BFFF873BDDFD7C2F4DDE70CBB5D8FF4C
-:10970000B346E22FAD9FFACD370BFE602C0C789A52
-:1097100027F064CE589287E35F6E3DCC5BD690E72E
-:10972000B05D7E5DF4ADF7CD7C7D489912C955964C
-:10973000E6223D33D87AD4F493ADC040F2DEE26540
-:10974000BE1D900E31339F04F22B2F53213CE46554
-:109750009AA89EF297453BDF04F8F7A981F84CF8E8
-:109760009EC17CA350CFA8BD8E8A78E8CD860C52CE
-:109770008A7098433B48CE411EF0B43E913DB32AD7
-:1097800002CE2CEC6F34AD574F26F47BF6BDAF8E76
-:10979000201EEB867E3602F576FDC52F4D2AD0D3EE
-:1097A000D625919CB579FD0CF9A3BEAB86CD2EEAEA
-:1097B000978FF55E2EBFA3E7559B69E4EBCCDD4B9D
-:1097C000FDDC9CC5D75DBB93AFCF4D8D3121947B24
-:1097D0009BDC212B021D5B1A6428DF6F2995BD08D5
-:1097E000B666A7F82D9C5E16DFAB4C467EF5CA5ECA
-:1097F00014F1DDBE8F5A1220FF66E978AF0C799B19
-:10980000EFE9D62C9CB7D728CAB38338EF37C69672
-:1098100093BD728B4FA671D9FCB810AA8A6EDF3B3C
-:10982000EED930EEADCCB7F624D0B10A9437D2B130
-:109830001BC7067A9D7104C6225EB4F9DCEC9DB8A4
-:10984000F664A49DE1E3F6007CE27AAC74603C949B
-:10985000A8E51548A71BAEE774F8F4797368198C6E
-:10986000FFA915F44C84BEF8D4CEF5CED44CAEC7C7
-:1098700018EB1C8A72BF2FAF0C33E0BA7FC0C1F166
-:10988000E136750EC5F5F62749DFCFBDAD320B8148
-:109890009C59D02AB11080F8E9CF5F1C8AF2F79367
-:1098A0001D2F0E9D19015F743B2D9DAE8DD7F68443
-:1098B000CF02E3CD64DA78E1341C6FA6D77C02E5F1
-:1098C000076B1DEFEB89B01F484246D4671B7C2411
-:1098D000BFCFC16A44BED3DA9D9B1FE3433BF31C59
-:1098E000B38424186A66971C36637F3E5F8E1BE83C
-:1098F0005DA7B58FEA7F03F20FC025ED97C276A86A
-:109900001F5BD44BF27681C57F24158A16201DA1DA
-:10991000FE44A4A384FCEA33E1BC1589CBF3330EE7
-:10992000FF834887396D7A3A66663AB87C77B8899A
-:10993000EEA63A9B82FA22A999713BF0414308F5C1
-:10994000B53B266E04033BC694E2B1A19CBA212F1D
-:10995000A6C5108FDF8786B07E7A4A01B50B567098
-:10996000FE0E26B150B3845D364864073A7A9802F9
-:10997000DFD3C630C72A944599DC4EF430EF069900
-:10998000ECC44E09ED440D0F9A7C47BE41B9F7A9CE
-:109990006421BE91BA24B2FB6443E774EC77303E95
-:1099A000DA12C5475BFEC97CF4ECA07C1450898FA9
-:1099B0003C9681F908F64DDFA93E0BFA15C0D71089
-:1099C00081AFC7857CE97DD04274831F09E75B2D99
-:1099D000FAABB6D8C2F20892139FF5C96FE86733A5
-:1099E000D89FB84F4946FB19D2D4E6192AB7DFBB36
-:1099F0007B24E82FF66A0BE9BD470CDD9968E70F79
-:109A000019DEB01BF963C8F4A29266B24FD29C284B
-:109A1000F751D6E0FCEB1AC7F9B91D00FD221FD59E
-:109A200098683F51F750B99FDB0155B43EEA575B48
-:109A300055D467E3BA3297227FD42F01FB08E5EFB4
-:109A4000FE8E8D73215F37D5E6453BC56A995284FA
-:109A5000ED58AB7E9DAD943AC92E0E4E645E94DBFC
-:109A6000E74286A07124CAD99EAD3F413DBEA0C841
-:109A70001B5471BD09BECC61A417DA9DBE6417E00A
-:109A800075DFDF64DA17B58F823CA42F0B7AB6D767
-:109A9000F8929D909FB9DA4A786FEFE0E5E7EC80A5
-:109AA00020E83F45E6FDB1780BD73397CA030BE2B8
-:109AB0003D690CD37E36603E45CBB73D41768CB6D2
-:109AC000DEDB33393CF6227F265ABE017574770CF3
-:109AD000F04F926CD0364541B4BB63714C9EF7E1B8
-:109AE00070EB0C00480A66BF5E53393632CFEBF795
-:109AF000B77F6472651AE9D7BE72041BF4AE96F79D
-:109B000059018E15F6FE7205EC49CB7E49B4BF763D
-:109B1000F2F81C98BF24C60F9AD6F800DEC7AD4CE9
-:109B2000375E247C4A54FF4615F7F5A27E70A47F69
-:109B30003C545857A2B56F6EF301FC8F1BF5FD1115
-:109B40004A457BCC68E3FD2EE7776B568FEDD7FF58
-:109B5000600F38B346F7DB012BDEAF6E1B0963C520
-:109B60003ABE30A17ED5F479BD5B223B237ABDA6F7
-:109B700066717F05D8B5A95911F66E35DABB32D9B1
-:109B8000B9137069D52FF133B42FC16EC8C0F1CEAF
-:109B9000BEF7D9A983F0BD7DF2A764E7D75F54C8AB
-:109BA000FEA807FB03ED764B17B767D97E23E95D67
-:109BB0008DEEF70AF9D3EE04BD8F7CFA8A341AF9D8
-:109BC00094B186A1B7010D9AB37CC3100E6D3F16F8
-:109BD0000D6F4516B7CBEB0B2A36E661FFDB25860A
-:109BE0007A7F55C18749689FD4779D489A13D16E73
-:109BF000C1FE758487053B8D03CEBF228BDB9B7531
-:109C00002FEDF5E17AFF3424D15A9EAF8456A25D40
-:109C1000397FBE012D35561A9A7127AE7B36CDC4D9
-:109C200072617E05C2AEA9DF3925782DEEDBE0AF8B
-:109C3000049F36F9E7D2FADE34CD62639908E7CCA7
-:109C4000FB090F8E181FE261554145328E53573381
-:109C5000C181FE937AB0B3B0BCEEA1BBC89FD267FE
-:109C600007EF3756A1FD5506F6D6BF01DCE9AE4930
-:109C7000555E588FA9F2EE518B21BF7E10F9FB5E25
-:109C800036A7678BE40FDE8AEBFE2589ED50FBCB10
-:109C900033F673BBEEAE2C6E076ADFEFCA52A8DD57
-:109CA000D860F738E4BD034A4F2CDABFF5CCF7395A
-:109CB000EE3B99DFA6EE203A71B9E36E52C9AF646C
-:109CC00071F73C3212CBC72AB49F604ACF5A1CF7B7
-:109CD000EC4AB7771513FC8BF9878A4228478F66C1
-:109CE00005E621FF94093BF2EC4B378E9A59D46F6D
-:109CF00027ADECB08696011E56DAD57FA942F9F65B
-:109D00001785E41BB3F4768F437AFCD545FDAEB4DA
-:109D1000865622FD836B8C54BE3B25B008F9E67451
-:109D20004D551EEE83992D985703FC6474B731B4DA
-:109D30001760FB407E068BDBCF54C88F0BCE5024C0
-:109D400094F351F6C738F4F3D0BE010687EF1542FD
-:109D50006CE502179CB2D01268F926A1DF1E39FA11
-:109D6000D554053F6A768AC11258804D2BA7C5305D
-:109D700019F97E79EF1103CC27D6DD4D766C6DA7EE
-:109D800044E3D416BC6042BFC97D9D7C5DD68B7D0B
-:109D900000E06F28DA038F64C58AFD670BF55BCF9F
-:109DA000BA691FCD76717A3206F5EC91FB89A5541C
-:109DB0004FEBCFB48CFBBD6A853F067AA4F2F56207
-:109DC000BD6BFE095898C23EE0E3AE97BA7D32E221
-:109DD0007594E48DE41B2D7D3E8BEBF7F843BD13AA
-:109DE00070FDF6027FA15F66A35473FF6B30BF8DD9
-:109DF000A3877BD184F2003BC925F81D5811F05E82
-:109E0000BAFFF309C8376070D37AADDB5F2ED7DABB
-:109E1000486FD3FE71486C4307960FB9A780F46A68
-:109E2000CC55EC9EC9F0FD05B1CE926DDCCFE55965
-:109E300016CC5C5484E3FBEF7F0DC72F8E213FE5EA
-:109E400010A08DDD45692BFA853C6CA984F5D6C53B
-:109E5000F1FE130DF23D3545247729EFF24ABE6D30
-:109E600090766539A97FD87755219CF89DF663C017
-:109E700019B89F453F17F633249BA76793C30A0A77
-:109E8000884DAC67EB0EE4CFFD6607E2A97AFF6F61
-:109E90008EA1BEACB6B04E19ED95283B6349FA943D
-:109EA000D7903FCF9D39B5F561F8B6EEB67DDE00AF
-:109EB000D1456F3F44EF17B66195E4C1EDBD0FFA90
-:109EC000E8C9EDBDBEFC3FDCDEE3767D7047ACBA91
-:109ED00023429ED78B7DDAB9F9E7E350CF7CDC07CC
-:109EE0000FE8E9B27E7B65E6F6D813B8AEFAECFE71
-:109EF00028BBE1E833B141A4FFF94E2BF9E914B4D2
-:109F00007B009E33F6DE1F2272DC26BF4FC2FDC3EC
-:109F10006EA37719F4577FEFA7BF30C0BA533AC08A
-:109F2000EE89477B5F8D2739FBBACC76A05DA6F81A
-:109F30001CE8F7D0E0579C133CA8B75BC4FC179A09
-:109F4000C279640799D87CCAC785F3D0EE7959E8FD
-:109F50009D85319087EF8D9EC0D748B714339757B2
-:109F6000D80EBF77087BAB0350E240BC1C837D77E3
-:109F7000A6D0DFB8FF79343DB48AFC3816A2E74793
-:109F800007CCDBD0CFF35181216CE27E09F263A9CB
-:109F9000AD0A4B86FAEA316B48E5FE2E8B01F4FFE1
-:109FA000ACC7EF7B03F715B30E703FD6AC7B97DCE5
-:109FB00082FB8F8F264F30A1BC99C302E4779EC7E6
-:109FC000B81F7A010B717F35731870BCFB406C6C45
-:109FD00042511304EC5F0D9F2583847685DA027964
-:109FE000329A7D6D5530EECC1603ED4B66B5EAFD29
-:109FF000E91756DD5F857A7C458B81DB8FAD12E9F1
-:10A00000F159CCE741BB43C36B617602C983608BD6
-:10A01000C187E38CCBE67A054814A2F989B4C52838
-:10A02000FCF0028EA5CC10C6D420F1748543A91A89
-:10A03000483F6BFDB5181B2CE80FEB4D37901FF810
-:10A0400082C9378DFCA8AE3C867EC4167B436B1557
-:10A050002FA73573C1DAEBA7F2EB146EF031D5857B
-:10A06000F23233DB40FD45CF774E9B3E1F7D3EB144
-:10A0700020A4CFCF6281FCE46CF41BE9BF67667358
-:10A080003D706155A63807F0D239408B517D3B13A6
-:10A09000E5D54A85E4E5D2348E2F433A4FB39C95FB
-:10A0A000D3887F9D605F10BC1CFEACEBDC12EACD58
-:10A0B0001627E7CBFF29DCD1F0DE949DC7F18B4654
-:10A0C0001E8CD7B2520A717C71B8AFD47FB1305BAD
-:10A0D000BFEFECCBFFE3F79D9C1F57CA62BD394829
-:10A0E0000ECD74F0397D24799F09E3771BD80700E2
-:10A0F000F7AC957209DA29E3A6D8681E7507ACE4B7
-:10A100006FAD5DD23314D7515D454F5EC3007845C6
-:10A1100068154D7E41BD996ED827E0BA6DD59F5325
-:10A1200081A66591E74E53D27C4BB313713FF2D1B8
-:10A13000EEDF20BD775B493FC1FF0E9A517EBD9493
-:10A140004976535E5A606536EAF598F0D66733D1A2
-:10A150004EE176526D97B903EDC0992D11E75EF887
-:10A16000CF6AFD39186B75917F83B5EBBFCFDF1CCC
-:10A17000D5EE927331AEEFD79B02C3D0BEBBE17A6E
-:10A180005F32CAD5330B0C0CE93B4BF6CE45397226
-:10A19000C6AAB7BFCFD839BD76666BF2DD9B877490
-:10A1A000EECB5F42676F1ED27996810522FBA945EF
-:10A1B0003A037D170A3A9FD97B751ED2F9B3DD5752
-:10A1C000E7219DD71BDB7CB86E9ECD08EC423C9E00
-:10A1D0001CEF27FB09E455DE77E1C70351FC78E06B
-:10A1E0007F8F1FA9DD60FAF0B77D70E8F5A1DBA4D1
-:10A1F000A6A13C9C69317FAB5EC49F01FD6B163309
-:10A20000F9250E7CF5C563CFA01DD225931DA2F5BF
-:10A2100077400964A35FE1C0318F37280DDEFF83EB
-:10A22000C26EF5585810FD1F9ADDAFD98FD1F2F8E4
-:10A23000B898CFD96C5F0DED1785BF76BEE8D31205
-:10A24000FA82DBA9DB25F2C75AD44E1FDABD75AFFF
-:10A25000CC70A0BFF67488FB67EBF68E22FFED8210
-:10A26000D0ABE154B40BBB2407EE1F166C3F118733
-:10A27000E7DDB01F3D934D78E3FBD1F1623F7A3AC1
-:10A28000F4511C9E8BC3F837E33E22D6DD6B42FEB1
-:10A29000AD837D1A5461754AEF11ECAFCECDBC4150
-:10A2A0001415FBF5FB36EDFC7293DF44F26E539709
-:10A2B00014C27D5A9229909986FA89A5394EC5F61D
-:10A2C000AF97FFCEF6A5E0B966FFB9B1EF6B84CBCF
-:10A2D0008DE74DD0BE67633CF1618F91F9C80ED810
-:10A2E000681772492139F5E7CD4EDAF7D00FD4FF60
-:10A2F000732893F29ABE9EABB0B002789F3BD5F71D
-:10A300001ED20DE577384A7E47E6FBCEA35937D7F4
-:10A310002F20CFC3039D8F8B736A3CDF8D6C5FC78B
-:10A320007AA91D9EF3EAFAD5F601AC61940A70DFB2
-:10A3300077B7CD8BF64B3DF07563493F1F2E145315
-:10A34000D1F8B04EF879EBE77F48FB81FAFD920334
-:10A35000FDBB0BBD9C0F17C23EC93CE2D275CB3A88
-:10A36000810F23E01E6C1D5F9DA35FC77DF97F9267
-:10A370003FB322476FCF6AF3D7FCE27DF3EC92F84C
-:10A38000FA8A9A57F4FE32DA9FADED0FAF54AEDD84
-:10A39000D9070FC7475FFE9F2CD7E644E165B0F3AE
-:10A3A00082EF2CD7A2CF0D72B81F1CCF0DF05CF737
-:10A3B0007F7A6EF089DA9664203DE8D39DA7A29D4E
-:10A3C0008EE3B46E91C93E9820F373E85ABB99FCB2
-:10A3D000B4D1E7ADF5EA0471BED8FD876B507FEECE
-:10A3E0003132D4EBF36DF3E83CB35EDE6572A80363
-:10A3F0009C332A07C97EFFAEE7EF8FE6F49DBF6767
-:10A40000E2F97B59855E3EBF6AFB22211041E78A53
-:10A410002230FC07E0678B1264AE88EF4FE6707B5A
-:10A42000F8551127E331B1568CBF78DC1EEBC37DA4
-:10A4300087C7C0E3789AB3FC5B500E5A548EC7A707
-:10A440005EBA8319607E4F193B495E046B6D5E9462
-:10A450007B9A9F45EBDF2EFC0557CADF7BA3D6FB1B
-:10A46000DE7FF27AFFB536DE773D07DB00B8D1AD8F
-:10A470000346E75D6FE0F94DE6A5FC3A583F83F1EE
-:10A48000EDDB39FE377368BDF946D0B9FE15CA95C4
-:10A49000D8D2DE8FD09FC3F69855DC57A05F83F4E7
-:10A4A000E1EA64AEA7146F19E219ECB9328C833A71
-:10A4B0008EFFBD6670FBEF74DFBAE7F6DFE941E5BA
-:10A4C000CFDF67FF3565F83FC5799E2CF7E5A17EA4
-:10A4D0005C6107F8715FF7731E3FB3D9CAF973B3B4
-:10A4E000C4F992352668FE119A57F0797EFE1DCD8B
-:10A4F000572C57CF577DF97FB2DCB4F5C1F1BF2C93
-:10A5000037E7FF350EFD9C83F71324BA9555741376
-:10A51000DE7A5F91D8B608FF737D378F434B17F013
-:10A520006ADFFF2AECBFB9B9BEA118CFF5D97B16F7
-:10A530000B8B075307790CED2EBF8DFCFF759D3CEF
-:10A540004EA46E09A3F3DE3AF46F16A1DFAF86A125
-:10A550007DB74F0D1460FB15EFDB82723CFAC52707
-:10A5600033B2EBDEE3F9456AA088E2C596F4E8CEA3
-:10A5700019CABEF96239FA2D005EF203B8D12F1361
-:10A5800041A769B9FC7C404B6F8B821FFDF4C4FF6F
-:10A590009D7208EDC158B59BFCFE757BB89156269F
-:10A5A000FBC83FCFEE7331E4A3BA3DE5A35EA3FA47
-:10A5B000D65168CF967D50ED403FC467D7B929BECC
-:10A5C00060A8DCB300EDA9A359817108AFBD343494
-:10A5D00011EDD10CB047D1BEFD6CF7C45108B726C0
-:10A5E000FFD6A37F1BFA5D6FD7FBAF99C597F930F4
-:10A5F000FAB7B70DA1FDE1EE94C0CDB9B84FB37273
-:10A6000078836BAC7CBD0ABF76F4FAD7D6FD10D93F
-:10A6100040E30CF9BE85CEA135B9B0DEC80296EC98
-:10A620007E7972958897037CF078BDAE1A1EE7217B
-:10A63000F236B73E6EF16CF6F8AB707E57E5F2B8C5
-:10A640009439965E09FDEC73C4F9FB8D228E428B22
-:10A65000A33AE3F0CFC6FA6C4955FFB97B16B6773B
-:10A6600070FE17F131B117B99D9CE53011DFD85B51
-:10A67000193F3702BE41FA8CEDED1E170FF3C96981
-:10A680000F8F457C1EB868207C28356FD079493CF7
-:10A69000920DFAC95EDDB3321FFD258E77AF43BA46
-:10A6A000A86D8E0A44DD3ED5FF00C1A13414E0FE42
-:10A6B000B1E2F7461E0FF84A2CE9F9F6A10B291E64
-:10A6C000F0ECFBC0AF9997EA032D0DB26514FF972C
-:10A6D000B5FF1DF2DBDBF74803C6753E9E6BE3E773
-:10A6E00049C16E8A336363DD840FE5950F82685F2D
-:10A6F000282B15F254B4187D062BD27529233F7BE5
-:10A700006EBBC38074C9107125E70EFCF78800ED9D
-:10A7100047343F7D8852C5D8B31CF757CAD29EEB49
-:10A720006105B3DA3D4E431DFA358DBD75E41779E9
-:10A730002596FC9F19FBB3977D0FF219AD0E26A14C
-:10A74000FCF9D57D19C8D7419867EE00F36CCCE5CC
-:10A75000713BCA2BB106D45BCA1A4671888A33A9E9
-:10A7600082E05E0779E86791E01BEDFC11C0F5A07F
-:10A770003E9A9B1BD88E788E15728035C690BFD0BE
-:10A78000AE70BF86BDF1FDE797427EABF0B71E3AD3
-:10A79000503899FC732B1509E970C13923C301DFC7
-:10A7A0007F99CBED11BBD2CD1CB648FC1FA2B8CB14
-:10A7B000AC57785C9A62E47CA2AC7477A0FFEFCBD4
-:10A7C000B400C5975ED71296E9FCCA71726D951AEE
-:10A7D000B17FD9C0F548DD4EBE6F8EDEAF5C4E7FD7
-:10A7E0001CCDD5DBDD7DF97F925DF24EDFF87FE792
-:10A7F0003E84E9F76FD1F649F47EED12FB3AAABF29
-:10A80000C1EC142D8EA3A27F1CE28757ED9A1D1474
-:10A81000D4C5B954D8F8B8CCA2EFFFF94C2E27B460
-:10A82000B897A4667529C697F7FE94913F4D8BCBD8
-:10A83000D1E27082157C9F103480DCCBC4F39F364C
-:10A840008ABF49656149227BBF8761FB2118870365
-:10A85000ED7B72B3A8FF2DCCDB2A935C542584DFFB
-:10A860008AF11B09087768E35C1CEF361B8D67C50E
-:10A87000F88D04DA27D03A4EF1F3B8CD71F379BCF4
-:10A88000670AE85FCCA7E470BEB44E33511CA7162C
-:10A8900097A1C56F6878A910F84EC99F9B89FB01E5
-:10A8A0002DCE637D4CE8E75619E33B84DC5F6020E6
-:10A8B000B9AFC5CFB5E7AA21E4F77318E769BBF2D2
-:10A8C000788E68FC6A711D37A40792F346535C07C3
-:10A8D000E9512D1E43E397083A06AD30FEA657B85E
-:10A8E000FD5E31DF44F09F5B3089FC87E716181866
-:10A8F000AEA38A2E33E7BFA8F1364D33B130F6ABA5
-:10A9000084AC283F353EB89CFD0A742D40FFECA175
-:10A91000A69DD92761CD1F6EEAA4F49C55EA944701
-:10A9200062DA3B1D25D58867874E51AEC13895DE6A
-:10A93000A112B04EC9CE9CA9944FEC3D8EF949F9B5
-:10A94000374F55404F9CCBEDDD2A619C49FE89294C
-:10A9500094479E4C616CCC33BF9F12A479737FD314
-:10A9600038E16F323B03D7E525E27D809EE5DDE4EB
-:10A97000D7E171FD18F787F4F0D84C64DF7844BC58
-:10A9800025AB14F19778F202F9E6E451745E6D6339
-:10A99000EA9E6E2C4F33737DCF383F37E7727F309E
-:10A9A000A948949D699AFFA82788F2AA39D349ED4E
-:10A9B000FBE4EA1E7388FBB1F8F86FED2DA6732651
-:10A9C0002D8E943147FAD4628A37D1E51FB7F273DE
-:10A9D0004FA638D2D17E68360A3B55E463D202775F
-:10A9E000E545D8496F8DFF5111AE8733FB7E9283C9
-:10A9F00072EA4613D8F103C8A5D4022E97CE196D7A
-:10AA0000AD12D86D6FA4066621BE8EC54E9FE08440
-:10AA1000794D4B28373911DEE0CF6594938982DE7A
-:10AA2000CEA91C3E67A55F9A03FD365B613D43FBE3
-:10AA3000C480E2237B3D3055BA0DE06E9684FDCE96
-:10AA4000D478B2DB0BD4783CD75BD8F80EC555CBA5
-:10AA5000420EC8420EBCDDD493A3E482CAED5C234F
-:10AA6000A3BDFD8E385F7E2793DD5333803F737D1A
-:10AA70001EB70F27CB6A31F291FBE1B1EF54035FB0
-:10AA8000C8266F88E8976E5791DF0FDACB3C3DD030
-:10AA90008F94F1D3528C4B6E4EFF6929C695C82E08
-:10AAA000AFC71F915F9FC7F9B812EB21DE621B4A47
-:10AAB000518FFDC3FA8B87FE8AFEFEFEFAFA3173D0
-:10AAC000B8165A7A872AB03EBD9EC026A4DB8519E7
-:10AAD00027E8BCF587296F1DC7F888B78C6DE3E2BE
-:10AAE000500E654A826FB9BD76245FF36BF2B8F6FB
-:10AAF0002385DCAF097288C74F16F37B34D5531911
-:10AB0000ADE76A115731C1C1EF254D28CDF436C3E9
-:10AB1000D46E61BD0ACAE909C7FC71483F36355099
-:10AB2000EA2F1EDC0E631EA31A295726AA1179F8F4
-:10AB30007B53813E7FB3579FBF75CCD7F991F935D1
-:10AB40001EDF8B38EF97251EA719BC8639689E6ECD
-:10AB50002988F652E18B291DC27F4BF184FF2AF62A
-:10AB6000732F8E61549EB4D3B20DEF17687E705967
-:10AB700094177A9825C345F8203DDB2B89B84437D4
-:10AB80009DF5B07DF73B38FEA0AE09FAD93743A555
-:10AB9000759C6433B0EB71AD975AC87ED2D645B37D
-:10ABA00015F81BF058966A89417E6F367A37605FD8
-:10ABB000728C5945BD5A1E67A1BEE59F29A4979680
-:10ABC0005ACD14DA7AE8D118CA9729CC8FF1180037
-:10ABD000E2544CDF327A430D385FA887F36D76324A
-:10ABE0009257729989F434F44B743DB4C6106234B0
-:10ABF000FF7285E22D05CCDABA8391E8FB13625D22
-:10AC0000CB06162639966221397618FAC77E0FBD13
-:10AC10002E77901FAD40BD1BCBCF5BF2E9FE4D7D83
-:10AC2000DFBD22C580C015083BCAD9C5EF7F69EBDF
-:10AC300059932FD1EB19A4608E3B89711055FC07F5
-:10AC4000A691847A9F913DAF9D0FA65BB472C58794
-:10AC5000E324F7D5E7F7AF92443E353F93D61B5434
-:10AC6000091B4AD0FEF8CD5F906F35F9B075C5CF9E
-:10AC7000483E5C8AFF8207293FC9EEE0F8CF4FC308
-:10AC80007528C7E4A7A1BE6B767A557F44BE0096AF
-:10AC9000D13417E207EA417E4AD5891C25C2FF97C5
-:10ACA0009AAF92B0847ABE0480E390554DC3F53AD2
-:10ACB000C0B8B57CDCD87FECB81E1817EA1DB2C34B
-:10ACC000B8506FBBD51C36C40D34FE1815C7BBDC9D
-:10ACD000B8804E42EA248167E08B20FAA50ED90D98
-:10ACE000C49F93447CEEA1443E1E2BD0C7CFE4C446
-:10ACF000C0F8E46FD5C7CBDC286D6E41BDFC843550
-:10AD00006E1BF2E36F049F1C89FD590EDA55BF9943
-:10AD10009E7718E5CA84F8A52DC824935827C91B27
-:10AD20004DEE5D483E518679907FD7E603DD7F98F2
-:10AD3000F5D674ECFCB0F3891CD47F201FBE979F1E
-:10AD40007829FC1A3F6A70231FE23AE8E3C328F827
-:10AD5000353E62B7745280E116B04B31D5EC54C623
-:10AD60001A781CB89ADE3F3F60E20996063E8FA52E
-:10AD70004182FB46E75A8A371B312CE047B8A68D43
-:10AD8000FC7CA882953D33F2711F06F0D6FCFF844F
-:10AD900037DA2EBF5C3CB40657F43AD6C69726EF96
-:10ADA000A478E8FAA9368A8F1E27E24AEBE71B2827
-:10ADB0004E08F66F64F7D7314B08E5F0B5C28ED672
-:10ADC000E2F47F2571FF6770AF59DD11618F5F1A63
-:10ADD00027AD521C7670098FA7EEB3B76BB9BDDDF6
-:10ADE000A7D7C4BD80F6515C96B7DFAF52BCC4CBC9
-:10ADF00012AF1F9CC1B8BD5E23CAE738443C05CCE6
-:10AE000025A93F5EBDBD8311FFB7DBB3A83C45E676
-:10AE1000FA877D8FEB9FF64C6E4FB6DF9947E5B012
-:10AE20002F1886789F2583FDCCCFE7F9FE20978FDA
-:10AE300017EDA75D9FCFEDB23E3B47E4A3FDB2CF38
-:10AE400066043622DFCF29F20D9580AF6699B8DF10
-:10AE500015F86E33DE89A9620DDB956CBC5FD1F00D
-:10AE6000AE219BF8EE29E2BB42E0BB6C1DDF85F210
-:10AE70004773F98BC254E3BB3E7E2B888E870BFC55
-:10AE80001CFB6977767E5087FB8A2E33D1418B6B12
-:10AE90008C5EE711F09C347278DCB24CF0EC1E084A
-:10AEA0009E2BE1FF487E1BC2389F0FB60E86282CD2
-:10AEB000682FE95F076B3C81308EDBB71E96F37D10
-:10AEC000E42570CB36E28BDBEF9439BFC6727D8E02
-:10AED000E749C9307E8D18FFF695FE4A27D6AB911B
-:10AEE000080F355DB514F7C52AF9B99017FE203C57
-:10AEF000CD42CE69E757D344FB298E1A23FAE3A645
-:10AF000056EBCF91A6D9F839D5ED538D1F46DA3DD2
-:10AF1000D3D8EACF314E711A9E3369F5818FDECFD7
-:10AF2000B7BBE9FC5B65F978CE7458F859CE015F80
-:10AF300023DFBF96386FF3FDC077F94F1695A03F1A
-:10AF40006E7CD282ED6B20FFECA6E1947F2DE9FBB5
-:10AF50000FBC85E55BF3285F6990884FCFD5F2F68B
-:10AF60000565774ECA8C43F92FFAC5F584FBF59831
-:10AF7000407B0DD4F38CC82AC1F8D14AE137387729
-:10AF80003FA3F29B46DA7948EE3C95FC7E9531A2D0
-:10AF9000FC07BCDF3746FD4709C6115766F54E472B
-:10AFA000FE7EA3E4E5E1983F2C7D3E7DA03886C27D
-:10AFB00002293C0CF052E9E2F5AB4B7E9E827E9872
-:10AFC000CA0A9E2FF496AFCCC672C3F9E903DDEF2F
-:10AFD0008D11FB9EBEFB6A625DBFE83B41F7D3FC6F
-:10AFE00016C98B53F48F39417E0766931CE83AF3F8
-:10AFF000FB3215F4738FF3F138D30ACBD264945F2C
-:10B00000B7044CA5182FECB08C3A8C7104F163CACC
-:10B0100047235DC75918D115F83CAE00D6D7B4AB5D
-:10B020003F1F1A87CC65D3F3B9C647351A7F57EA55
-:10B03000F918D6A71BDB5F4EDE0EC6C730FED00266
-:10B040005C67DFD3EB9BBEFEA2D65B74FF83C901B6
-:10B05000FC89948BFD7074D2BA4AC3E8BD6C5C77EE
-:10B060006DDABA1B89F33019BAE99E4E86E41D4E9B
-:10B070001756C7782DA48FA2E0D6E04B07D9C64A51
-:10B080002E850B7F14CD5EE43F6EF44BA48972686D
-:10B09000E763AE7EB860FC1B100F6C3987678BD4FA
-:10B0A000C0E586D81F68FE8C3A6DBEFBF5F32D8B8C
-:10B0B000E1F7D63DE877C276EE51C3BF0DEE7AA137
-:10B0C0004FA75AFC8F9A610EB73967113FDC011AFE
-:10B0D000CD09F3FF5B6AA006F1D12C055FE9C92415
-:10B0E0007F3CC57700BD271744D8011A5CD1F8A86A
-:10B0F0001B441E46C31D8D877EFA742763AADD7725
-:10B10000EB9B57D47CA2ED02B749EFCF7309BF9BED
-:10B11000ABDFCF5680E5D52CC64B7E36AF44FBA8BF
-:10B120006AD0F32847ABAB18F9475C3603F9D9343A
-:10B130007D3F187FDF703D9737D50B99B84FC7E734
-:10B1400011CD5F4358CF83F49E8345DD381BD7ED87
-:10B150007C9B2E0EBEDAC6FDF32B0B24E197EF1974
-:10B160008D7E89BEFC25FEE09ED1283FA6CBFA73DA
-:10B17000AAEA8BDC1FECBA28515AED3D311AFD2C9E
-:10B18000AEAA9ED128871E19EA5B85743D6EE0FE4B
-:10B19000F24BFC160506CD1F7C457C174D0FEDFCD0
-:10B1A0002F26CDBF01C73923759761E1862C713EEB
-:10B1B000C30299C8974E476639FA7140CE7DF30DA8
-:10B1C0006E1EB108F035262310C2767730FF78BCAA
-:10B1D0006BE9AA0A18F97905A3F92F12F31F2FF4C6
-:10B1E000DFF9CD3CAEA2D257F0041E89D41F35B290
-:10B1F00010AD3F1FE9B1FB04FCE741D585B1FE2E40
-:10B200003BE9C179AFCFA27889FC0D86FE772BE0B0
-:10B21000EFB0508CEEDD8AC29D2E5DBEB83345572F
-:10B220007FE4FE2C5DF9A8F0705DF955474B74F989
-:10B23000D1DDD7EAEA5F7DAC4297BFA66792AEFE4A
-:10B24000F74E4FD6E5AFEBBD4B57FFA3BE7DBCD04D
-:10B25000DF415F7701CC7BB6C69F1767EADAFF292B
-:10B260006EC251E4CFD9AB79FC77396048F78E478D
-:10B270001BD7F30DF007E93B9EF552DC5D5D48F20C
-:10B280008619C691E9ED8005FB3B088F97BBF79EB9
-:10B29000EF9E6140D3F78302116F7235BB9AC78D61
-:10B2A0007E3B5DF358CEDF4557B3474F57ABAAA758
-:10B2B0006B6C819EAE76AF9EAEF163F47475FAF45A
-:10B2C000744DA8D2D335D1AFA7EB90697ABA2607CF
-:10B2D000F4744D9DAFA76B7A839EAE198D7ABA65D3
-:10B2E00006EFD5950F466F4D1E66B72ED2D5EFA34C
-:10B2F000BB7F3EC511E5B6FD58D7BF46F720FC41E0
-:10B30000BAE73311EFF83FA47BF2303DBD417FA493
-:10B310000C1B4D7A3F1DD369F9C2BEF60FACF73551
-:10B32000F913A96723F79783C9A54BF48AD86F0E41
-:10B33000AA57A2F69BEF31D07B34C86AF21FDD29F1
-:10B34000F8F3500CC7FB1758740DD4833A6300AE62
-:10B35000F7106E18E7BD9842F20BDCC53A8DD8FFA6
-:10B36000DDAC9BD2E9AC97D20073901E9DC9BC9412
-:10B37000CE667E93F013DC302C11FD073D65A88767
-:10B380002FCC78EB389D2FBD917045EF3D7C88E741
-:10B3900018B98C9D12F2E0249E6740FEAC55F8D39C
-:10B3A0007C4C7547E0ED94F0FBCD1C27913E647218
-:10B3B0000CC559CDBC43227D32F3FFF2F48E61DC23
-:10B3C0001E8D4E9B1B35FCF17DCADA612AC9F7340C
-:10B3D000D629F41E0BD8B2A91F7EFEF0B489F693CD
-:10B3E0001E0B87EF798929635C74ED8CE8EAB170F4
-:10B3F000789E37320BE2F339165091188F2820A22D
-:10B40000F87D87E1C81F33FFEF5B59E82F8B59B5F3
-:10B410007B6AE535783E125C4AFEEA1F30BDBFFA12
-:10B42000EE0689FCD53F003821F538BC1ED4975A6A
-:10B430003E88F0C23C2AB11E7C1FE26990D03FF4E6
-:10B440000FEB6FCF8F79BDBFB3BFBE7E18870B7F69
-:10B45000907E9AFFB1C0C0E3157AEFE7FB94ED3F11
-:10B4600060DC8FD6182C0FE2F9A40C1B4A8C6732D3
-:10B47000F27BE86B8765F2FB6EAC9BF6F9EC8866B5
-:10B480005F0648FE16897B0E67C5F9DEDC0E0BC32E
-:10B490007899A2DD075D789E371778B01BF5B0125A
-:10B4A000A077568A36BEE6E2FE37A313EF2F6AFA7C
-:10B4B0007F703E55D8A988FB02C0770D03D91F7B4A
-:10B4C00086F373FAE6A6EE61781EA7C1F370D35136
-:10B4D000CACB8A97E20CF11D2667447B931BCA23D3
-:10B4E000E49D6283F61172C868F3D36326CB9BBADE
-:10B4F000E99CCF28DE8B5A91B6C81188D8C7BD30D9
-:10B500008C8FCF2C41E64862C204C754398572ED56
-:10B51000AF8CEF67CD1EE827527E5E4C64917EFAB9
-:10B52000D6A66304EF722910C04ECC392C6C05FAF4
-:10B530009815BC730BDF37DE7814E3A94CF645DEB3
-:10B54000B03A38DECC1EE542A43C7D7598D8470B56
-:10B5500079FA2F4DBD85384E73538F862F86E7A617
-:10B56000C1647E8FBEB9E913FA6EA85289DF5EDD31
-:10B57000987F5085F2E3F017DFB531BB395CECA260
-:10B580009BF4EA74C107E8134B07FE39DE68243EDA
-:10B590005B9C6E237FFDE237730FFA603D9B60BAC0
-:10B5A000F27780BB7F1C8E279390A7C04F7E940FAD
-:10B5B000A61485FCF62EC764A2D3DFDB9F865F93BB
-:10B5C00095D17B44A6741BD905570AE7B9287D0598
-:10B5D0007821F9BF58E0457B5FE9F8038CF60B8BC7
-:10B5E0001FE2FEBBC5B58CE2FD5923FC94F5F38D3B
-:10B5F000A66712F12518F8D8D6042B0EBA78ACC974
-:10B60000C202F96087607C7C763F1DDB7C8A138FE9
-:10B61000FAD754BA6B307D6CCCC936147F8F8FFD4E
-:10B62000B21B53F4D5E3F88E061642FB98CEE061C8
-:10B630007CE77CC8C3F871A23C2EC0F3F1A23C7E2B
-:10B640001ACFA7FB5E902A11B0A873A5749B6B62FA
-:10B650000ECAE9D98CDFB716EF2D6C11FA22D5E6A8
-:10B66000AAA9C4F2BB19DDBFD0CA9F14E5C9B60FA1
-:10B670005BB3518F4CD5B7DF28F030C4F661DB38AF
-:10B680003A7FD2976BE73B89B6F347A97D91BE7CA1
-:10B690009D686FB79DEF1E87E539FAF11F15E5B17B
-:10B6A000362E0F999FF1770144F923A2DC8AE53801
-:10B6B000BE9797CBDAFB17A2DE4A0107C6B691FF09
-:10B6C0007318F77F6E6DB214115D9A2E127D1E6B8A
-:10B6D00062949F34DCC5EF6557717CBBDC9C1F1CFA
-:10B6E0008D6CC0F700260DE7FBAA38B5C7E71B40F5
-:10B6F000EE69E52E077FEF40F698889FCC3621371C
-:10B70000C47AEC931B5283973319F7975F8EAF611E
-:10B71000A15D40FB6828FC205FA73D60608108793F
-:10B7200099B230860522EA7B66BB74F9A4BB5374D8
-:10B73000F5DD53B374E5B6D2E1BA7236D545EB66A2
-:10B7400091E0AF98A2125DB9F60E03DB2EEA89F5FF
-:10B750006BCCB95657EF7C811A8F3C7E6A22E81F6A
-:10B760008A2BF05A503E2CB2670D41FDF35CD31882
-:10B7700042CEF3B0AEC06865BB9C3CDE7C179EE356
-:10B7800041F9BF36F9E8FB0E2857217D1AD69D0AEC
-:10B79000F53B9A1C947FAAC943E9962695D2279B2C
-:10B7A0000AA87C639397F24F40FF98AE837EF0FB2C
-:10B7B000DAA62ACAAF69F253FEF1A669947FB429CA
-:10B7C00040E9234DF3E9FBCAA606CAAF686AA4F4B0
-:10B7D000E1A620A5CD4DAD541E14F4DE25EEAFEE4E
-:10B7E0002AE7F7D2A3E9F8F07049F75E9CBD3F7EE7
-:10B7F000E4E1E1183FD2D94376B8163F82F3A6FEC2
-:10B80000AC7CFED1FD6D1ACEFD09C359F7D258BEEE
-:10B810009EE99C3677BF77592CF07D6A03A743E6F3
-:10B82000FE5E2A4F9ECF69B149E865E60EB2B4329A
-:10B830003AADA77A67A5EE8A587EBE4DFE0CE6812A
-:10B84000799689779288ED4206844B19C3F5A7460D
-:10B85000D7BE793B399C38FF81E0DD21E0954B3B39
-:10B86000F9FB27556D6164FB185F03BD7F6299E6A4
-:10B870000F2B90BAFD017A8F61F8C509B0390379B1
-:10B8800073F17AA6429AB650BF6F4B995DA2DB174F
-:10B89000C9171F632AC8015B917E7F1593B348D7F0
-:10B8A000CE92F6635DB9C9BD4C573EF3BECCE51EE2
-:10B8B000C4672A3FE731AF5ECA9201AE39ED6B082B
-:10B8C000AE77041DCF4A2ADDE30EEED6E21EF8FE67
-:10B8D000E259A15F986535D963F94E9ECD8B0F1A59
-:10B8E000503F7CF66FF124979E79CA10427F2E88D4
-:10B8F0002703AEFF4230FBB0BC98F5501E435630D4
-:10B900003F8AA932E6AF62BDB4BF82FDC5EF866350
-:10B91000FCA81C78CA0AF933E9816779FC5A98F4C3
-:10B92000679EA0679EB69FDAA044FB79DF1A4E7C23
-:10B93000A8BFC7D622F6172D56EE7F5BEA2C1B82D6
-:10B9400076EBD941E20DED9E578FCC067CDB930F51
-:10B9500052AA7D7F54350C784FFB8F51FC3F0C98D9
-:10B960005DF0FF1F119E33A56F27A11BAA2EA7977D
-:10B97000D6C159C9E79981F87D5DE6FC083B2E9C4C
-:10B980009F22F0ABEC2EF7CC003C2A6F667B83AC99
-:10B990007F9C679A8E65633C8096CF13F1B23B9B88
-:10B9A00092732A23BE3B0B393C05ACBB0AF55541CB
-:10B9B00091C11BC28E7D0E9D1FC39AD3E6C377072C
-:10B9C0009412E64531378CB52D43DDADFC4DA6789C
-:10B9D00027E5D0354C85FD8CCD1666181FA6F5CB16
-:10B9E000843FE4012137BF7454C6D37B92297DF292
-:10B9F0000F7524FBD2E6EB463EFAB2DDC8E7754888
-:10BA00005F5E60E3715C730B4C2155C2F7CBDAE8E3
-:10BA1000BD4465ABC4D232118E718407B62F96F83F
-:10BA20003076C3081684F552EA0CFC05F9E44C584C
-:10BA3000DD67C8163C09F56A0B4DDBD03ECB47BC31
-:10BA4000D8102F77E654E2D0390584DF3962DE79E9
-:10BA5000857CBDB6A447C1C3BC3E7C57746EBBE6B3
-:10BA6000C7D1CFF3D1D28A5BF1FDC5E66E99ABB5F4
-:10BA7000287CAE32768F98015D9FE901B8648233ED
-:10BA8000AF10E5C2863216243DCEE757FB94C4368C
-:10BA900065925CAA223D3EDAC022CF31B5B4B8909F
-:10BAA000CBDF9786F3F7DAEC9E23C48FFDF9C3470B
-:10BAB00066033E9E33B0023ABF35F0FDB116372320
-:10BAC000A31F00D29F146AFED2163609F5B6D340E2
-:10BAD00071A072470CDD4F959D0AC59FB7D82A1DEE
-:10BAE000F7623F0E85CE6B26C863BBD18E363B0D09
-:10BAF00057A11D7E78DB8FBB317E474E5718FABDAC
-:10BB00005A1C0AB743D20C1497A7382B2D78BE9332
-:10BB1000673B598EF83CD8F1437A8F417E50C4CEB2
-:10BB200008BF985190AC853550FFC13445BCEBE25D
-:10BB3000AB1E95248E2654DC0F557D82FBEDC38E03
-:10BB4000F356DC17A8B6B9E40FAC2BE4FB44239EF4
-:10BB5000E341FEA925E79D28BF5EEF58EECA447B6E
-:10BB60003AA4902D52F075730ABD3BD061A27711B3
-:10BB700034BC660415DD79607AA33E6F8E3A1734C3
-:10BB800046DD479B85E3939F781A0B47CCC7E8E1D6
-:10BB9000FB37E6B6D1FEA7AE50BC8729F273300F53
-:10BBA000A4D8690CA678013F873AE666E0BC2EBCB3
-:10BBB00014A0F8EFC1ECFFD242558C17B41AE8FD7F
-:10BBC000DDB015E3C1B737312FDA79969042F1F83D
-:10BBD0003B843CCBB171FEF717713E8F4E73DAF8A0
-:10BBE000BA5376C58462916E8ECE9220ACF3C25762
-:10BBF000273215F4608EC367407F7C4EA3C98BF655
-:10BC0000E7845FDA884FCEDB783C95D2F8888ADF0C
-:10BC10009BB7951544DEB30B3539BC289FB6355913
-:10BC2000BC18A31E1A44BE663B0D14C7AE1A785C3E
-:10BC300065BB588FED85B194AE1572E6692538194C
-:10BC4000E17C1AE889F1F3075773FB78D1520BC1F5
-:10BC5000B1E8F56CB2AF06C3DB334D1E6F0EC2B355
-:10BC6000DA9082FEAAF29539ABF09D8C4576FE8E75
-:10BC7000B01C3F9CFCB6EC774686F67C73DCB5DEE8
-:10BC80005911F25D8E1F5B807C25CBC114F4E7FC5B
-:10BC9000BCF0DC6D18570BF4DB84F9DDCFFDE13629
-:10BCA0008CA3DD690FA6609CED4BCFBDCFCB13837A
-:10BCB0009B30CEF6E073C779797A30C500F9D79F0B
-:10BCC000FB9097E7063761FEADE74EF1723C030348
-:10BCD000D9F9DE739FDE16447F8BC93B1F05F22F17
-:10BCE00000FE2258629D22FD40E0452B7F01BFC32C
-:10BCF000066C8F48A3CBF78976FB0729FF9528EFC1
-:10BD00001AA4FF03A25D7890F68744BBC383B43FB7
-:10BD100022DA1D1DA4FCB7A2FC8D41FAFF77D1AE3B
-:10BD20007B90F66F8B76EF0ED2FE0FA2DDB141CA8B
-:10BD3000DF17E5FF19D5FF7151BF477CCFB2AF7E4A
-:10BD40001FFDF7592047502E15D857BB709D6F6BBC
-:10BD50002D25FE6F2EE3E7541ABF67498CDEF7AD41
-:10BD60002EE2EF8A551771F9FB67D13FF0E1E3C886
-:10BD7000778BDE9429AEA7D9E03D1D4239BACA407F
-:10BD8000F6C0A2D7F97E7DD14A2514792FE7CF518D
-:10BD9000F02F47F880715B3085F576A690C7F59B4C
-:10BDA0003D1E6F75843C333AF47990170CE52EC82C
-:10BDB0006F8ADF2E5859D15A00F95497812C10A55B
-:10BDC000D612C6F73A14BBD00B8ED2B60284CFA6D9
-:10BDD000D03B059A9C67368FCEAFD16253E8DD36F3
-:10BDE000D9CECB27FC72AC03EDAC1616E8F6617B1E
-:10BDF0008F4276FCC1D61207CA3D937DB603D7EFBA
-:10BE0000BBC57C5E9575053128AFE5470D24BF0F96
-:10BE10003BF87ADFEAE1F14EA057E89E13C86B2F9A
-:10BE2000EA887C165E8A7273E763FB66703F1FB315
-:10BE30008F2AA37B44DAF9B6A444EC03AE2BE2F8D4
-:10BE4000C9107A4441FD02E9D3A5E2FE4B90FBA361
-:10BE50003214E6498DB8C77B5D91CCEF1F2988234A
-:10BE6000E84BAEA6F7AB862E5174E708690FE8F3EE
-:10BE7000A628BDA144E995EC569093BAF313872EFA
-:10BE80005F5424FC3C5EE6453B76C22F57933C3C16
-:10BE90008FFA4D1A5CEEF5C95F218F9F4604A01CF6
-:10BEA0000DF27BE4075797FC16E9BD68A581DE8D8E
-:10BEB000BE5239FA678405F0901B90482FC0845217
-:10BEC00070DF74393CE41AFD2E7A57E332F8C85D0E
-:10BED00057EA42799B1B50A8FF4BF4C665F0F5BCAE
-:10BEE000E43D16403A3A63845D0D0C807E3B574C2E
-:10BEF00007C6179B843F458B17568628FC5D7C71CF
-:10BF00005F55167CFC30F3A9AE6C7C17A881FCFB56
-:10BF10008B773FE041BB7D8521E0C0FC51D7A45E1B
-:10BF20001C67116CFA117F3BB10F7A1FF3B7B7FB97
-:10BF300000FECE90497BBF328CFFECC63820ED7DF1
-:10BF40004C0FD96BA2FEB5B75702DE3B1547219ABD
-:10BF5000A04B775DB7DE781DD437B1BEFA78EFEE2F
-:10BF6000B9C306F17EE6B8F595209776C730DDFBBC
-:10BF7000A0BBD1CF4EFD4D588FEF81C27837C9B0ED
-:10BF8000375B5B74F37A5B723F3CEB8AA7AC5F8AEA
-:10BF90000E3BB14F7132FEAEFB19B5270E970FEC79
-:10BFA000577E5204F4ADED389914B95FD7EAC78BC8
-:10BFB000FA755DBD75BB54AABF94EAEFEF8D2B22D5
-:10BFC0007CF79645D68F137E8088FA2BBEAD7E8196
-:10BFD00006CFAEB76F2FE2F51FC5FA67D59E248A4C
-:10BFE000AD898227E1D2FED77E5BFFC345FD33E1F9
-:10BFF000B7A9FE59D693549C49ED3661BB736FBC0B
-:10C000005D26E69D84E738EFDA7C4F16815C6AC0D6
-:10C010003ED07E561A54FCDE696973A0FD6635B6C3
-:10C02000F9510EE7E03B5F63FAD3ADA83C465FFAF7
-:10C030003D9A9F3B2D2CA11AF9B5D140FB9BFD3DAC
-:10C040008647902FB7A68D75E0FE79B7A9BBA408E7
-:10C05000EDD7BD36B25F0D199F59D16F6ECEE7EBAC
-:10C06000DFEA6CF01641DE9A5E44EF74CA0F2DEAE7
-:10C07000A4F7C27FCADFD1527E660A6C477E0C2FBE
-:10C080002A9813B1BED7151B09BE95AFD956E3FE4A
-:10C0900060A5D1DB968F76B85DA1F84BE567FB26EE
-:10C0A000917DF80B0323F90FF3AC807E5B6628F4D7
-:10C0B000FB0E4E14CF3C5844F8F0FB2BA0DED044CE
-:10C0C00045C27B3A0F2B7E0B9E7798855DB7D5CB0B
-:10C0D000EF6969E37E2CECCF8F8BF8BBEE5BD32E40
-:10C0E000BC37CF8DEF3098E87EA56DA1216C8AC357
-:10C0F000FB66DB4ECF437AC6F6ACC4FBC631298A59
-:10C1000003E7F7643594D1B95C277D0FD61A68DF51
-:10C1100090B0D0E043FF634C8E49E7EFB0C1389157
-:10C12000FE906F8A03C710EEABDE546E423C7BEE8E
-:10C1300037D03BA48F7ADEB51800CEB8527D7BC7CE
-:10C14000587D7B57A5BEDC5DAD2F4F9AAA2FF7DC3B
-:10C150006D8AF2EBE8F33334BE029960033D15C3F8
-:10C160008B588CED4213EE7B56BC16C3883E4BD6E3
-:10C17000B7E5E3FA8CED257CC50C8F21BFC08A643E
-:10C1800013C9F515C5DCAF7F28DD7413E5615EC802
-:10C190001F5BD38ED07EE412BCD84E7F8DFDDB5862
-:10C1A000C477B4338A7D7F291ACDF39E32F4E3310C
-:10C1B0009287CF4B3EEF41C4F75BDC5FB1B591FB9B
-:10C1C000B11F9DCAE311690665B8DE79FD38CBEA77
-:10C1D0006EDC97C5D95AEFC738CB68BC2689F38681
-:10C1E000AD78CB16F92EC0DF675EAEDD77C2EF65A6
-:10C1F000747B81DE1F1B3F82F38B53D809F19E8431
-:10C20000A296887B1349C26FF2F8D89956D41FBB07
-:10C21000C57B1E7DFDA934280F3D45BF72B124F6B4
-:10C2200053BCFD7AED9C47E4139D3CBFFBB0EB266D
-:10C230005C5FEBA7BA4A70BFBF42D877F16926DFCF
-:10C240003098D7DAA3A6A03412F20A3B6C04BB6084
-:10C25000B78B8F6B7A3D2688F7F3D67A4AE9BEDF33
-:10C260007562BC17CABDEFE07AEF857584715F6BAC
-:10C27000DD5E6B8938370D027C685AE03EE56075FB
-:10C2800009ED77D7FABC56D49B6BD3BC568C97B6C6
-:10C29000262B0E8C077579147A8F6DAD25E040FB47
-:10C2A000C7058AD484E749E96D13E99E1BE0DA509B
-:10C2B000C68F1A988833C438BF0481CFAD9ED90E7B
-:10C2C0007C1FC19DB3E747E8A74FC0FEE2783BC49F
-:10C2D0009353E0697CB14A70BB45FF09B35FA0FA94
-:10C2E000F8D35216D19FA0A369220BE13E4D1B5FEC
-:10C2F000EBA7AF7FE6A37380E5BFE5785B9ACEDF5F
-:10C30000A132DDC7683FF742796027F2596F720C9E
-:10C31000C9BB144F4A05F251CAD14D93F1FEC3F285
-:10C32000DFC6F071E6707E4F5198E57A9C7762C067
-:10C3300081788C5EAFC987DB6A902935BA44AFDF5C
-:10C340006485B5CAAE4BD771B2C75D91376280F5CF
-:10C350001CB55E928FF63E88FD47AFEB2DB1C74707
-:10C36000713D12F15DBE7CBE45EA5949723859A152
-:10C3700075961E351EBE6787798919548C4F5E5796
-:10C38000ECD4DEAD5211AFBB4D8E71367EDE4EFC6D
-:10C3900055F1E2EABB7E07F90BF87B73A056EAD1B0
-:10C3A000B66ED28BFB03F9587FB312780AFDE99B76
-:10C3B0008F0DA17722CDB1FC9D4F53D4BB259ABEE2
-:10C3C0005857CCF7316AD4FB96DF35ED4C4B2B74C4
-:10C3D00000CFAC7BFEB77FB024FEE3ED9FB4C39DDE
-:10C3E0004B6DB0A6B7ECBA653DC6475ADFE4E59B96
-:10C3F000211F54102F0BC9EF7268E8BD34FFE6F718
-:10C40000CCE4CF2A96BD1B30CF3EB0923F6EE7DE24
-:10C41000B1D3709D34DBCB54B4F79F11F267BB5896
-:10C42000CFD1F3924DDE00DA03D1DFB7168B73095B
-:10C43000E63DD601F42D7EDA44EF25F5C547745864
-:10C44000F9EF331376E86C21CF66EF5B35F420C348
-:10C45000F7306AF615C3B8B3ED9549084FEA458938
-:10C460000540FE6D16E7B3A9EE1724943369EEC3B9
-:10C47000E528EFD359F752941BE90DFAF3B2D48BA8
-:10C480000AB5DB9DE2A3FEF007EF399B9858D3AEC7
-:10C49000005B8A723E859FB7981C31FC7EBAA7521A
-:10C4A000779F597B47F655810F13E0D45802A94D69
-:10C4B000E1F7E7A3EA1F15F892D16F8FCE7FC791FE
-:10C4C00063D4AF4DF92CF25D16DC9792D05AC8CFE9
-:10C4D0003F014F41DC87B278173F2FF5F9D4C8B838
-:10C4E000D65490BBE6128C3F09529C48B2B89FA02C
-:10C4F000C5F500069CE877D3E23EB631BD3DA2A566
-:10C50000DAFE3CA751A67D47E1AB56BE3F686521E8
-:10C51000AB84FE3046722767353F9FD6FC62D5B8A4
-:10C5200098683D380C3CFEA793E29935BB0AE84B6E
-:10C53000726765D47B4FDA7BD55F88F5B4B9C941A2
-:10C5400074D4CAD302D174D49F736AF5522FA6B2A1
-:10C55000404264BF21EA37B5710FF143EAC5A154E7
-:10C56000BEB949BD4CFF5983F49F4CFC3278FF693A
-:10C5700054BE25FCAEF31640C593BD7B9C7E15E5ED
-:10C580004A78A277003CA73EA0979323F7EBE5AE4D
-:10C590008697CD8ACF5D03F8DEFC80C1DBC130FE1B
-:10C5A000545FAF2AF3F74EFE7EB4563FEC9E82F501
-:10C5B00017F2FADF3BADAFEF2FDF1B5D9FE0BBE172
-:10C5C00062947D18459F687801AEC4DB22E01A674B
-:10C5D000D1FFFEB869332E812BF18E08B86EF4E8D6
-:10C5E000EB07960E0CD74D05E66F854BAB77EB98B6
-:10C5F0002BAB173D8F2955E641F0CEEBDF31EDCA6D
-:10C60000FAFDFEFC6FAF774F63F43841EDFC4867ED
-:10C610008F243472FBDDC17A29CE44B33B5CCC213C
-:10C62000E2BFB8DDF00EFE17F6B34B46F86F1D31D2
-:10C630001AF1EFBB7B9D8AF754B8BE62D5FC7D48EA
-:10C64000D8971447BE7FDD0FD732EAF7658C772283
-:10C650003D6BF1A2DD5998CA2CC9687C794259F822
-:10C660000ED8F4119ABCE6F1E5C305EE9E4FE95CE5
-:10C67000E4A4751E72213CDF75DC7B47F8E68C482C
-:10C68000ECAF3F98BF45C393C9D449BF3FA1B7D6CC
-:10C69000E645FDF02E1641BBA76F3787D1AED6E237
-:10C6A000508FC54E3F92A8D2FB038BB1FF69774CE8
-:10C6B0005C8E79E95082BAC886F7977AB47B9E3F40
-:10C6C00042BC2DB40432920C74BE9A8FFB61E64FCB
-:10C6D000109782FDC503C56968F0544A1CFF316993
-:10C6E0008120F65369E8DEEAC76F4A37DF673B12FD
-:10C6F000F9FB47F8CECD00EB5FC34385E8E7A0D157
-:10C70000FB552FCCEFE09A78BA0F3F3BE18EE9F86A
-:10C7100036CA1C833F090FD023E07E8CE0B6CDC81B
-:10C720004846B88D026E4BA2C0BB2FE7DBE0EE8B14
-:10C7300097F9A9A4BD534EF917834EBA776E367C8C
-:10C74000F1EE14D4C3C5062FDA9D9BC1BEC077D6C7
-:10C75000FE8FC0F7163C6371D1777A7FCD23EE5FF1
-:10C7600079D61BE8BD157FC54B44A7A7EB6C5EDCF3
-:10C77000B7CF602ABD6F3A4BDC47F963F97FBFD270
-:10C7800003F3DB3522F02CD2E79E04C3D077098E69
-:10C790004021BD6735F6CAE267B573F8C9C23E9855
-:10C7A00023F03885F9286EF7361630E2B86F9F35DA
-:10C7B000F9D02E7D5BC423DFC182F4FD4E16A2F4B6
-:10C7C000FB2C4CF57F802FB742FEADD811E98D00D0
-:10C7D0005FCD13F9B9B81E23F0FE8AE0977BDC9C8D
-:10C7E0005F3E1E82786F4FBC22FEAD9138FE968C64
-:10C7F000081CC1798FB3A86E2FC2E41897867E9467
-:10C80000BEF55399C8F94F71E47EDBFAE93EAFDD1E
-:10C81000BBF7D992CBF0DD2DFE73A3EF3E8A17C78D
-:10C82000B87C37D0A15BE5F70D416CD88340A7AA4F
-:10C830007299E2F6567C2EEE49A31303EAFD669444
-:10C840004CEF8469E792B788FE6E49E3F706ABCBFD
-:10C85000A7B4C4035E267CD5531A86B42A4D7F8FB5
-:10C8600070A2BB839E0E9F94A3FF7E136BA303E273
-:10C87000EA227D9CF92D51FECF833836F0D527234F
-:10C8800044BCE470363CF2BEC1ADA2EDF9EA2F4CD7
-:10C89000E760FCF491815EC4E3A29BFF389DF675CE
-:10C8A0000A7BF32A985FDDBFCB644F7ED80433C97F
-:10C8B000C7B86A0BF381C17F0AEC0ACC9F6EF250B5
-:10C8C000FA29D801987ED65440E5679BBC941F3F57
-:10C8D000D2FF17A4F3CCD6CF15D4472BB4786C0174
-:10C8E000871657B842C44F2CB62F3A86F10B8B29C6
-:10C8F000E09DC1626F9B80E0DFBBBFF308A6F05DE7
-:10C90000C67DC8E23512F975E61C0E2C4732CF7B86
-:10C91000A3E7161413A37F7F3209F7E9B568C702AE
-:10C92000EB2F76F92C23617C5FD789230950FFE335
-:10C93000A63104DF274D3E82EF4F4D55944E1FE93F
-:10C940008FA37AEC737A6FE9E65D2714FC3D68E308
-:10C950007D12F9EFAFF7B15008F0BAC1C8E5FB0698
-:10C9600090EFB83ECB8B276F7900E11B11F08C0460
-:10C97000FCDDE69A353E01BEDF32668682F5EEF8D2
-:10C980000A7450663F1F5E8EAFCF1C90083F670E43
-:10C9900038091F1A9E6A05BDCEEC2BBC15DF1F3B64
-:10C9A0007054A6F8D3F3170D04DFF96331149F1AFE
-:10C9B000DD7ED1DEEC21688FFD09E887071F8BF64D
-:10C9C00016923FFE4FCFFF488D8CFBFD93ABF3C219
-:10C9D000FB28A7FE8BCB29B0374F6D423996964284
-:10C9E000EFE8F4C5ABB18658D4637526B1BE40CE2E
-:10C9F00060FE4F317C1F5CF68BD40A5C2F381EC65C
-:10CA00007B99C5EF9B80FE8EFF18FADBB7C943EF19
-:10CA1000EE7CB6FB892C1C7F67E79CF73741FF67EC
-:10CA200042FCF74D9C619D677F85F274BB8DFC963F
-:10CA30002B24800BF5E98E14CA17484A4C2339334E
-:10CA400042B46E0B2455C177C816BEB03105F90B40
-:10CA5000EF8B635CFDCB6B62494EBD6CF41E6FC403
-:10CA6000FEB6F0FE9E7DECA10FF763FA686DC94338
-:10CA700090DE3ED245789FFD2F0B86637BD0D7F4A6
-:10CA80007B959F7B510AA31FA4B8FDE0328C631AEB
-:10CA9000B9F9842105D251DBA5664C0BD3271D457E
-:10CAA000FFC1DD235582E3AA5D9932C6A60F4F0967
-:10CAB000BD7F038F1BD1E9F7A2F6CF2B709BA9E9AD
-:10CAC000F9E152E7A71DB82F1E7AAC84DFEFE2EF41
-:10CAD00044EFED9AF2CEF719CE032C08847B8689B9
-:10CAE000E22E5828D881743E1328F0D2FB26FEE0AF
-:10CAF00046E4AF3381247A4F7A9F211887BF2F29CC
-:10CB0000789CFF5E9F17B7BF1587F114F17B8C0CE3
-:10CB10007FFF74EDA8DE09141F92AED27E3C7DEB40
-:10CB20008D55889FBA3D7B3BA89F85162FFA63E7FA
-:10CB3000EFFD82EEBDB0893C0EF5CC1E9E7FA4D2E7
-:10CB400047EF8ACFEFF833CF77FB29EF97839974BC
-:10CB50007F6216B7779E10FA8CF58C6091EF1269A0
-:10CB6000F47A048AB17C43663019DF9FD2F420E85E
-:10CB7000AF265C7FE876A4F68E29FCBEFA15EA2F74
-:10CB800093D0475A7F4F98F87BB92846F0F7CF6C7F
-:10CB90003671BDBB03E40DF28BA67761DCC7715C17
-:10CBA00093B82F930A4A7614CC27F5093397DF57A9
-:10CBB000387EF4BD52CD0E9996D04CF7473F4B0DC1
-:10CBC0003C89F241BB47CA142FBDEFF741AA6FF36E
-:10CBD000C8D1FCDD0C9C03E8C510D6AB93C18ECA4E
-:10CBE0008EB0A32C57A617FF96EA7B06DB5F69FD84
-:10CBF00068393C56C0BFD86E203C2C5E67267FD873
-:10CC00005871BF74ECF963B1284F16FFB984E44A38
-:10CC1000336303E2E795261EE7FD6BF423407ADDDC
-:10CC2000973D32ED470E1B161E01FD4A2090FFB0C6
-:10CC3000B739BE94F23E24F7F55F1A06DC2F6A2955
-:10CC4000D0EB359C9FEF2BBDFFE186AF1CF4FB2999
-:10CC500099CD7545F3EE7F67473F7FEDBD2B985F1C
-:10CC60000FEAF7C59F1B887F177F5E4272B3EB0AFE
-:10CC7000E76B75FBFE03E91A3D1F80FFBF0682BF0D
-:10CC80008FDF7BAF0CFE072546BFD707D415F9B75A
-:10CC9000BBC47B025D0B8AE85D8B7DF82E08CACD94
-:10CCA000C9FCDE5117F60DF5BB121DF4EEC6CB46DE
-:10CCB0009E0FDE29DA8B771ABBEE4CE1EF66981BEC
-:10CCC0007E578CFD37F3F8B82E63887E1F6CD74FE4
-:10CCD00013E83E81163F7E4CC8ED6629FC7D7A0F35
-:10CCE000E47313E3EFEA8553EB4BF11D90E154FF3E
-:10CCF00098F8FDC957FAAEDE5D823EED1DA11DEB31
-:10CD0000018EFF07358A15A9008000000000000091
-:10CD10001F8B080000000000000BED7D0B7894D500
-:10CD2000B5E8FEE79F99CC24936412421E8484C91F
-:10CD3000831024E0E40501421820A1A8680308023A
-:10CD4000C638212184BC0848CF492D3583090F15E9
-:10CD50006B38468D8A3A58A0A0600705440D9E01A5
-:10CD6000D4521F35D5EAB1DA6202880F1E0941FD9F
-:10CD7000B0D7DBDEB5D6DE3B33FF2451DB73FDEEEF
-:10CD800077BEEFA65FDDEC7FBFD75A7BEDB5D763EB
-:10CD90004FDBBC74BBCBC6D80895357832186B4BCB
-:10CDA00072C44542FAA1812DC6FC9F19FCC531F61B
-:10CDB0009881B9CC918C5D655F166D1FCE98F38616
-:10CDC000103D0BC742479C92C3D82315A3D9DD0A57
-:10CDD000645B1F622C9AB1C526467F4B83C326B085
-:10CDE000ABE99F0ED344C616F2CF6CC9F29D66A77D
-:10CDF00005F255E66E6502631F54DD196A83F1166C
-:10CE00003A556F501854B8B1C8D195CEEBFE2319DE
-:10CE1000C775D0B8AC6218639321D57BCB198CFB56
-:10CE200072AF89DD9D0475F06FBA2F65CCC518D43B
-:10CE3000FFCCCCC7AFF3CCB8FF8CEC0FFE5F65B472
-:10CE40006C56C2B13CD1CD60FCFD239CA3EDB98CE6
-:10CE5000AD3A7CCDFD674CBE7A15CB8BD298CE37E0
-:10CE60006EE03881E335BB752E038C37CAB420E3FE
-:10CE70000C346986021DCCD3E531BB7726E1BC7B3F
-:10CE8000FFBC02F2CD8BAFB2DF0DD939F34D0E25C9
-:10CE90008AB1BE0341EE2005BF073B705DCD47421E
-:10CEA000DD3AC8DFAA70F8372B8CBEBBF61BDC3B23
-:10CEB000E15BADD1BD6717B4AB7D79AC1D4666872C
-:10CEC0008CF01F2C7F31849787399236E460790C7F
-:10CED000E1F725832D9CCA7FAF322A0FF6A64500C5
-:10CEE000BC1B639DB310AE238200FF16EC977F3FFF
-:10CEF00089EB00F89C846E11BFAE8650EA9789BC1E
-:10CF0000F317C3DC77D37A1C71CB317FDB385A8FB0
-:10CF100013E701F362F50AADF7A4D57D571A949F84
-:10CF2000EC184EF38812F470B2F8EBB72641BD93BB
-:10CF300087553BF6F99746D56B0CC3728E0F65BECD
-:10CF400029AD1DDA9D7E31D41E04E525F7D5BC89B7
-:10CF5000DF4BEEAC9B4B69F5BA1B18D4EFBAF3A3C9
-:10CF60004467C6407C94D4422B3F3CAEB23B4A114E
-:10CF7000BFF7D89D65B8DE55195D950CE8EAA2B1FA
-:10CF8000F371A632F6FE4867057EEF79E1D35DF8CE
-:10CF90001DF094563C1E96A1073A41FAED9A407452
-:10CFA000BD4AD0EFB04C6735F607702C65298C85EB
-:10CFB00064741A711E6CDDF01F44275F74EC3CA48E
-:10CFC000C03835C11DF594AAEE09D8CF39C51BA6C6
-:10CFD000A4101C9DB8FFCE5BBD61880FA70EF28028
-:10CFE0009F9ADDDA75E19F1EE65583FF8076351E38
-:10CFF000D561C6FDC3DC469C7F0D33FAEA27F17D7F
-:10D00000887400FD3C49FBD5F297D25F001EAAF759
-:10D010008CCDBA1BF0531371F85753A91EB493FB70
-:10D02000451D9897EB19381FBEBEF3621F9C872FD2
-:10D0300006A49FBD419CFE19A78F8B7BE204FD7067
-:10D04000BABDB8678C1BE7132DF6CD45C5A50BC639
-:10D0500076BF64F69D302F66F74C9C371E67EF99BC
-:10D06000383F94B10715CE9F6A86792622BF92FC7D
-:10D070008B993C13E641394BF74C980FF55F12F54D
-:10D0800058B1278DBEBB3D69D8FE908E55213CE539
-:10D090007CAA9F8EDF4EF030F1FD5AFDF438828F6E
-:10D0A0001CA719F94838A6409F6103D7FD5BBBC296
-:10D0B000F77FE8C418E46B43E13F3D765806B2922F
-:10D0C0008B4B8CB73AA0DF31ED464D3FB2DE58B7FF
-:10D0D000F6FB61D1FFA8007C8E507B8F06C17CD906
-:10D0E000AF014E6CE078FF89ED804E9F7AAA1F7FDA
-:10D0F0002AC72763364937368213C7D39F8D124F0D
-:10D100006BE3815FD7204C927DF03A94E98C8F8459
-:10D11000F422E661FE8722200F69BD80BFCC4BB8A8
-:10D1200007D2DF9D7FAE8CEF82F6E7ED3A9A57206B
-:10D130005CD703FCB0BCD9C06E2D86F65F349D4829
-:10D140003963F0ADE76C93C301474D7FBEB23DD369
-:10D1500084FB6EC5B64CD3323FB837EFCE3E610389
-:10D16000BC9EDFADC79158B3DEFDAB2951F85DF52C
-:10D17000B818959B1C380FCBB13F60BDCA6D1159D3
-:10D18000AACDD77E457B91A3C20FFEE3766BF1312A
-:10D19000DEA3CD5F7D589BFF1AB95AEE3FDF2ED339
-:10D1A000ABCD679FD0E63FFDD3DA45B80D9ECFE308
-:10D1B000FBE63377A8DB0470ADFA68F6093C473F1D
-:10D1C0003BF47C18E2ABE6AF15AFC5335C87964EF7
-:10D1D000018F8A1ED6EBDAA510BDAC7407EE5FC1D5
-:10D1E0003706ECEBF5B41EDC59FE741388DF73CC04
-:10D1F000B3C801F455DBF86ECA996C98D75C20640B
-:10D2000098CF64CF5623B30C1C6F28FEC12C0E1B85
-:10D2100003FA2BCBE365531A67B1D3D01FDBF2C7F8
-:10D22000D9B85FCBEE5148DE287B6ECC2B4837DD7A
-:10D23000FB975C4BE9A239048772E630223F5CD150
-:10D24000A17843216FCDB31DEE8276CBDD8A1DE739
-:10D25000BDAC25C8C7CFE0FF155B02E6D1E6570E8F
-:10D26000F35F71F8E8370AF45FB54DDB6E25C00B4C
-:10D27000CF8FEA1DFF08F2FF0E8210C16B4AC776FE
-:10D2800015D7BD5CCC5F9E7FCC55C0707D537813A5
-:10D290007606FF03E746F028676E66AEEF1C9CD269
-:10D2A000C6DB03E32BC375D7598C365C779D897930
-:10D2B00043603E27428D0E2B7CBFDC1E4AF2436545
-:10D2C000107399B22865E62C6C670FC77667DF5636
-:10D2D000494EAA03DE43FD3CA1B89BB11F55E1F9BD
-:10D2E0005FF3FC4AE6A5F520DD38FCD7E9D6E65920
-:10D2F000EB30924B6AF5DEA308976AD645F066805C
-:10D300004F878423C0AD16D6F94124CA5FDAF6AB45
-:10D310009887EAAF3AFC8F20FFEF20673213D4DF03
-:10D32000160C29CDDF4D70548DCCA18379AA7704DA
-:10D33000BB5D24871407239D1AF0BC00B8B6DDE559
-:10D3400048C3796F501C6956E4635BCD76E4634B48
-:10D35000B7F373A82D02E45768DFB6F22A6ABF1448
-:10D36000E529945396707ED716E1F122DF6F7B207A
-:10D3700089CB537F57092EBDF79ADD4F42FDB64C3E
-:10D380002EF7B46D1D43ED915F923C756F286F3F92
-:10D390008FC3B56DB8D5ED82FC873845804FDB76FD
-:10D3A000479A89DA819C96E43BA7A43CFD9B51CE29
-:10D3B000DB10DF72BD52FE66553F4CDEDC29CECF5E
-:10D3C000DEAD304FE8FF8C52FC9ACE4F1E6EC9E4A2
-:10D3D000FC7FE24CC72E51CF8EF52A74F3EE9E0EE1
-:10D3E000F3AD7850676B4EF2C19D391C6908E73385
-:10D3F0005BCD5948671367021F06FA3B99C9F97953
-:10D40000480E73B821BD57F47B6FA64E93C6060332
-:10D41000FD413F678ABC06C46F684EB111CF4338E7
-:10D42000C3899F07AEE361D14F85B1F8F56983CC1D
-:10D43000A79F0E0AB9DC7266B5F2249F17C7F3C422
-:10D44000FF30DB9B69DD7C7E12EE4037B974DE0B6A
-:10D45000BE15D14F27EE3D6640ED56294F23FE15F0
-:10D460000D9D103CDBEE1D4F785C2AF0CCEE350BA9
-:10D470003A61EC6F585E64A372A013824F5B26E0A2
-:10D48000CDE23BF7DAE639E222FCCE23A0032A07FD
-:10D490007CEFCF1C3EF0BE25F1CDF4EEDCE2D0A156
-:10D4A000F1BD2C2F62A202A08ED7335710C005CF3A
-:10D4B0003C82CB5D7AF79D309F917A0EFF043DA7A9
-:10D4C0002FE0CEAEE02CAAEF3042BEECFE15CC0130
-:10D4D000F5CBE2995DE1F55938D6876E5448F1CC29
-:10D4E000C07665E1BCDFB218E6BE53C8FDC8AF52D6
-:10D4F000314DA67E1DBA48DE3E2C8BDABB74BCBD16
-:10D50000430FE9A814BE5F7A3704D1FE29DB94905B
-:10D5100086743077A6960E52B338DDC8B435CB2664
-:10D52000CE197B2CEEEF652D63E9DC683617D71D2D
-:10D53000447CED0B2179B06CE32DD7E7E2FC9E191A
-:10D5400086120EFBE286FD1391DE96B52CF9D97B8F
-:10D55000781FD96DA6EFFBB29C1FE3FEFA42B1958E
-:10D560001E840FCB161E37C6427BA767DE851721A8
-:10D57000BDC1B5FF0F2817DC70A34AF56F609EAFE1
-:10D580003F44BED0C2C7B9DE75491F0BFD5D9FAFDA
-:10D59000302CEF365B1357C3FCCB04FECE09FA6D7B
-:10D5A00036B3C5CF5A705E0969C9F0FD7A94540745
-:10D5B0009103C76609397186B20DE59E51B3F8FE35
-:10D5C00092F5B11FECF76A8407D4FB5AEC2B99074C
-:10D5D000B852FD8ACD41DD2961981ABC63205D9463
-:10D5E00033F36FB8CEB9C96C36DE9B7A7FAEB22703
-:10D5F00069BEBD65B4EF43D36CB8EF9D8C7989EFFC
-:10D60000B9C712DD77CFE8EDDE04F9EEED63ECCDBE
-:10D61000C4D7F9FD7DB995D1F9DE3D83F335C95FF6
-:10D620004E5ABB42895EC57DBE5C90C6278DB31E37
-:10D630009C04F5CB2DC66E3C0F963FB020CC06F374
-:10D640002C6F83FB3C9C636C8BF63E0FF7EDA8AC14
-:10D65000DC81F7F2C0FB37D20CD251C51685E870D9
-:10D6600054B3DD18477C4CB1E2FA2A2CDE543CFF5F
-:10D670002AEC663B969F6F72DC7F06E4C38B4D738A
-:10D680002865DF02DC619E5721F260DFA7673B93CC
-:10D69000B2008E65AD65749F0CC970127F720ABAB4
-:10D6A0009B0B605690DFE8BBE2701FBE9329BE471C
-:10D6B0005AD32C44CF668670E83658D3705EDD1B93
-:10D6C000CC3A3C37E7DEC9E91AF699490FEDEFD2BB
-:10D6D000B360DCEF3DD81EC62B59AF2FDE0EF9919B
-:10D6E00026A60F8D44BACA24BA6ECF717E8DFCE097
-:10D6F000B35FB23C940BCAB76CA5F948BA60FACED6
-:10D70000C26128E7ED4CCAC2FBB5A4A3F69C997987
-:10D7100008BF7E7AB851213A80F4680AD1C3FC6907
-:10D72000583E77A637750DCCAB48AD650ED433C4E3
-:10D73000327B10CCBF8FF5923CD107F2049E6792EA
-:10D740009F48BE0174E03045FBF0BBAB09A6023C2C
-:10D7500079779389D2A79AAC4C0FF0DDDB144BF9A3
-:10D76000679A6C947A9AD2E9FBB34D76CA1F68CA5D
-:10D77000A3FCA12607E50F37CDA1F4C5A662FA2EBA
-:10D78000F912C085F890E42B921F497A927C299077
-:10D790008E4A01BC0559D49EF89EE477B80E5D967A
-:10D7A0008F1F49FC262BC5AED824E4635D4B905FE8
-:10D7B00014A9E7F73D0FF0EDABB2D8836C0817CE94
-:10D7C000F7FA2C263AE7138DEC30DEFF9B573BBA75
-:10D7D00037F99DAB3757294CEF47B7B7349899DEE7
-:10D7E0008F6E6F6D8CD0E44B1ADF7D3506FAFF47E4
-:10D7F000827335D2DFC93BCE3EF65FF0FD893BBE7A
-:10D80000188DF88679EC7C08C75D17DC3F8F48CC13
-:10D81000B718E89C1915CCEF49A382F93D09FF1010
-:10D820003FCB18DFA74FDCF137DAE7DD8D41361546
-:10D83000E50FC417C0F72F025FCB1A83088E651B54
-:10D840004EEF7B1EF7FB3A23F1BB652D627F6E0620
-:10D85000B8FAC96DA7E218C9678A83B14680DFA903
-:10D860005F1ABD70F6B3538AC9AD4043052E4D25EE
-:10D8700008D7CDBFFB00E56DA5F104C9C74E93C520
-:10D88000ABE2FC5C86F3FEFD298DAF513DD635320F
-:10D89000E26C086D4586700CC97118914F206D239C
-:10D8A000FE96A51F63B8BF59AB621D0DEBAA10DF32
-:10D8B0002B362B247748F83F92A5D2BE7A2F534FB0
-:10D8C0006936EED9E1C4C0E89C92740B7CC3E1C612
-:10D8D000FDD19A69ACF4E3C7CBC4F7F2741DA5F28D
-:10D8E000FB7BB02D914EB2114990DE9D9E6C5C4E3B
-:10D8F000FCCE66447E20EB2F4BCFDA989C83FDCC88
-:10D9000088627EFB7257969EDABD9769E5F331C156
-:10D910003906ED6A87380FA47CF219FE7332CD9F69
-:10D92000EE5FD5CF3CFDCC8BA897F82888F0547DCE
-:10D93000B5D06F64B8272E20B9C66151609DF5023D
-:10D94000FF854FFF35AC0BCA571DE0FA5348BB317A
-:10D95000AD5F5745FAB27AB88F1644227F359CEAFC
-:10D96000F2A3CB579EF928AC8BEE17AE785D2CA6B0
-:10D97000DE780669FD81D3B319F6C77A375A2D03CD
-:10D98000DBAD52BEA57BA65C47D191AFA2697CE519
-:10D990004A34D53FB2217A303DC82AA63FD5BF7F51
-:10D9A00049CFE0D0E8D556B12D975498EFAA7573BA
-:10D9B0003E453A0FACFF41566814D20F9BC42691E6
-:10D9C0001E43CF7488EF35260E873EF7E870F61DAC
-:10D9D000FA9755EDD00844AD3EBD2DDC0EF3ED6158
-:10D9E0006CCE607849C8E6E7F405D8470CEE523DA6
-:10D9F0007B55BA2FF4EC0D25FAAFDF7BFF6B53217B
-:10DA00005FBF43C161591DEB2438D51F5099C9FF31
-:10DA10003C43FDCEB0A1E759F3746803D2D34A8FDB
-:10DA2000E2D809F3E933D9C287FBCDE76F829E6A5A
-:10DA3000823C1309AE62FEBD829FC97A2B3BEE3752
-:10DA400022BEA0DE45925F7E1BC2486FC67AFF8071
-:10DA5000F33CB72DDB8EFABD959EFDF574FEEF0D00
-:10DA6000B18E86757C21F4FCB21F6336DF4FC66C25
-:10DA70002E6F9C13FADC73CFA8C487709EB80FBFBB
-:10DA80004039D76F9E16D1CE22E0F61CEEC75C5F00
-:10DA9000FD959EEEB054A8FFE9E177298DCEE6EB27
-:10DAA0005A69E99C80E7E6A70742E6B8297D74F643
-:10DAB0004B30DE05CF8C28C56F5FA5641B383EB6A2
-:10DAC000A973105ECC3D4CC8F91E5ACFB9BDF10AFE
-:10DAD000DD6F11DE20E79F3BF05C988EF6AD4B8347
-:10DAE000479D89EB6983226C42CE34B5A2BCB11448
-:10DAF000A4BB70E07775072ED1F91BF85DD6A7FDA2
-:10DB00001687F7EF5ED26BC09F0EE9B7CECA715E83
-:10DB1000A466C4E03E28BDDA76D3CDC8C7DE307037
-:10DB20003C8CB43D84F7AAD2B78791DE628DC116D2
-:10DB300083F92FDF848B20CCBB345BECEFD8AE5C59
-:10DB4000D4737627F173BD76335C54603D2300EFC8
-:10DB50002E5872AD5B654EC8ABE23E734D7632AD6A
-:10DB6000EF912A9DC34876166F1AEA3D4F1A994BDA
-:10DB70004579F95933B7072473BDFE2348EF90D692
-:10DB8000467AD386A1FE4BE0B1763E94FBE1B3F634
-:10DB9000496F1ACA2FE78D5CCF87E5564CB378BD25
-:10DBA000664137D80FF6DB9D64BD4872E6C15086EA
-:10DBB000F2BEEEF950AE57F88DF9C920BF737389E4
-:10DBC000A02B90995CB87ED74E3E3F9C17CACF2BB6
-:10DBD0008DAD69285FCA715786B5D278E7C5782BB5
-:10DBE000835BB97DC2C8F591589FC63730B2A3F4A4
-:10DBF000EE092239F58BB8CE4338FE177BC6323C8E
-:10DC0000C7BB93DC9587A91CE437C047F553415E39
-:10DC10009CEFE77B42DD0CEA7F6EE0F2D0E7A1D11A
-:10DC2000240F9D087DB094EC323B8214D4AB7CAEC3
-:10DC300030632C96EFE4768CEAA646B23F54C37666
-:10DC4000675994CE6191583E96F42D9FFF1EF6A918
-:10DC500042DF37E377276B2DBD1DF7DDEE10D2BB1A
-:10DC60007DF1D4FF1A3B98DDA27A8756BF24E940A4
-:10DC700096DF9ECDEF1BB767F37BC11DD9FC9CA936
-:10DC80000BF13C984CEBE4FB15F040F72ED81FD17C
-:10DC9000A8EF3EE979215AB1209CBD698F22DC773B
-:10DCA000F3FBCD177B0D6477A97E3ED4417A9C4D62
-:10DCB0009374785E54AB5C0EAED601F82055EED866
-:10DCC0009D867276F31E7316C203E04DF7C8DE9D83
-:10DCD000AA18878FFBF9AE04AED7F78AFCA1F1A48E
-:10DCE000D79F1BC96E9D4F72CEB60908D7CB3B425A
-:10DCF000744817308E4301F854DFFE0B0ECFF04A04
-:10DD000092CB61FF11BFAC15FCB26ED3D4F0A9B8B1
-:10DD10009FDE5619CA0597F5F618E48781F07A4B0D
-:10DD2000F0959A438F19D16E570BFBC609FBA64697
-:10DD3000D8C76A9E5248AEABD938F521E2837F300E
-:10DD4000B0D1308FF39EFBC3FCF1F1BCE067BEF6AF
-:10DD500076AA5F03F579FB37C2683EBB0C769C4F11
-:10DD6000201E7F70FBA7D41FD4BE9F3E3C70AE4FD9
-:10DD700018B8EECBACF3DF3E427EB2D74CFA2BC0E4
-:10DD80007B22CA1DE70C9E4A5CF7B97D66E233E749
-:10DD900022F87EFF14F8A16B0CCEE3BAFB48BFF16A
-:10DDA000CE0286E7C10AB7B65F396E87E0BF75C39A
-:10DDB000ECE1A827AB033C607F80979F52FBB70D37
-:10DDC000D43E701D8F8A76FDFB735F08D1CBB911ED
-:10DDD0001C1FE79E1943E74A7704A773986F22DE5A
-:10DDE00057CE45F094A1300274502DEEA3E766782B
-:10DDF000E8FE7D4ED94F69B781B7AB6E147663A04C
-:10DE0000BB58A41BA449B48799B674A23C81FAEA12
-:10DE10008959947A832207EA9D913EF11C8ACAE1CE
-:10DE2000FB8BE178D1C2FE41728AC7887CD929E494
-:10DE3000B8DABD03ED7088DFDABD0AD9912E8B7395
-:10DE400010671D25F5E5408F352EC561C6F9B4ACC8
-:10DE50005E4976A486AD3723BDCB75D4E8D91CBC0A
-:10DE60000F752B2ACDA7DB0CFB06E1E03F9E9FDC64
-:10DE7000F577C10FF0CF1A4D722609D7BA1C1BA730
-:10DE80001FC8B6427FB52DCA161A2749DE2BF9FAEC
-:10DE9000249C002C46D497C17D9F970FB17E39CF2B
-:10DEA000C0F5CBF944E770FEDE9D64BB2F1FF1FD8A
-:10DEB000966AC77BFAE56FB3C323BF432EC39B5B50
-:10DEC000BFDE18E69F823405EB3A8BFC0DF733EA90
-:10DED000A5619E69DBB4F690F41DDAFC557BB5F9BB
-:10DEE0008C03DAFC840E6DDEFE8A361F22C6957026
-:10DEF000C27BAF6D0CBFF7628AF75E5B10BFF76243
-:10DF00001EEFBD98E2BD17BFE3BD17F378EFC53C28
-:10DF1000DE7B318FF75E4CF1DE8BDF6F1470AA155C
-:10DF20007A47C403DA65D80B666967A7FDD2B324C4
-:10DF30009AF8A7B493F6ACCCA07CBF5E679E89F438
-:10DF40003AA4BB01B964C1486741CE70B49F766EF4
-:10DF50008C43BCE9BB489FBBEA45AECFADCD325B3D
-:10DF600050CFD0B5E1D38D283EA58D74CECA81F5B2
-:10DF7000F6187A77111DE8BDC437BAD6DBDE9ECE1F
-:10DF8000F147FA0E6689A4FB49199E779143E33164
-:10DF9000D0AEC2B668ED28817695407B4A201D48F8
-:10DFA0003BCA1386DE38E4F7A7F798B6E0FC4F0BC0
-:10DFB0003D195B6C22F94BCAD545AA85E0B4E65EF3
-:10DFC000E5493CA72A7222A97DDF0990B707396F7E
-:10DFD000655A7E259BE4EAFEFC164547761AA78320
-:10DFE000CEA1DBC49C1295DEEE4D4823A13A3AC780
-:10DFF0002F5B74742FB8FC2795E48831ED3ACD7A05
-:10E00000C6BA8335F4356E7764803D7084A6FED53C
-:10E01000879303EC815769ED5437AE3F8AF7EB05E0
-:10E020005BB235F52A8AA706C051CC5BC8A5CDEBFB
-:10E03000DA1391FFDC16DA47F3BFEDA099FC2E2A24
-:10E04000E07C71C0BAAB3003FCB1CAE4B801E1575F
-:10E05000E53144A05EAB5C9C3FAC517B1E57E99917
-:10E06000CB1AE9A3BB2A2B734440FB0B99ADBB74BD
-:10E0700080B70BBA6D0FE6DBD0BEB43DD10A74B5E4
-:10E0800056F1444F86FE4E4738FF03E933D1E0FD99
-:10E090005509F2CBFD296C3DD43BBDE5B93092BBAF
-:10E0A000059D251AACC188EFEDAD2ADD0B503F85EB
-:10E0B000FA20490FDB5B8705A75A7CEBF4E1FF5B95
-:10E0C0005A1FE085FC46FA2CC746DE86729C87AF55
-:10E0D000B76A86E2223959AC678D3857580BEF671B
-:10E0E000ADC89F11F705B9BEF3638F4EB0A15DB304
-:10E0F000E970A28A7C5CB777571CCA1731CE7DB80D
-:10E100007FAAB68FFEAF7C18B7FA3D95A11DF99393
-:10E11000B659619351FEDC67B0CF85FCA6D65F1B74
-:10E12000F15E50AD771BF1DE59B567BB11EDFF3FD6
-:10E13000D9BD9DBE57EE2EA3FBF60AD640F7C8CF39
-:10E140000CFC9C96F0A89AA96CB3C2BC87E772B984
-:10E15000AF2A98FB8314A9F9AF46E17A772B99B8D7
-:10E16000DE1B8BF71BCBE0FBEF047F09DC1F7D6F11
-:10E170002E281A8E7A250FB7830EB51F167AC7D2AE
-:10E180007E58702589D21BAF8CA37BD57BAC783CA5
-:10E19000F1898C80FBEC9B2AD79B75F07D5065F450
-:10E1A000462DC07DF2B281F6491DF0AFBC2CBC27D4
-:10E1B000333605D2E27C5543AFAB0A4334F4BC9806
-:10E1C000456AECCA8BD8084DFEC6B9299AFA37DDE4
-:10E1D000382E80FEB37CE5C447A668FC57EAD6B962
-:10E1E0006C0AE9D1666ABF43BA8EE8EC5A4DFB3A35
-:10E1F00036DF570FEFC13BFE487066ACD388F7ADF2
-:10E200002A1DF7D759ECEC16DFBBE83B2C44B30FC3
-:10E2100047A5D8FF8B9F8B06D2CF4BFDF462FC77CE
-:10E22000CA60E722205A8C1BAE72FD82532B777492
-:10E23000D2FD93713CD4097D4F5D3AD7F7D4B93AFA
-:10E240008D0D1682BF3E1E4052DFAA903E0FEA9B04
-:10E25000E223797E1D7E3F60F0E95918EFEF0A96C0
-:10E260009F50CB70BF0496D7C3BA51CEA8477D0D3F
-:10E27000E999E67C4A7A26398EE85FD2E98A76AD5A
-:10E28000FEA81EF53A7EF85C9A6B237AADDEBDFFE0
-:10E29000B511009F05C51199B88F6A3DF30C65193A
-:10E2A00003E94DF2F9CB553AB27BF7BD799CE8AD65
-:10E2B000AF4A4F74FD7D70A97770BD66201D56C2B0
-:10E2C000BA4C307EE501C5EE56783D84CF08A4CF28
-:10E2D00000F8C40F023709AF7EF80594AFC07FE4A1
-:10E2E000A03F81E2F6260D06970078CA7102E0C5CC
-:10E2F000F2B4F0A874DADE46FE53794265EE1FB040
-:10E30000FE15B84E9C07AC13E731FF0AD79B487B3C
-:10E31000C2A22B7ACAF7D34D31C02B0BF79D769F43
-:10E32000F6D35131DF370BAF4453BB1F8B9EBE8FEB
-:10E330008EE4FC25DFF6EDA33B896F3A7343A3CE51
-:10E3400002AB807FE7125F10FC7568B9D4C5F9A8ED
-:10E35000537BCE8CBA238FFC8EFA2CC92457F49FA2
-:10E3600043566DF99AD0E4182C770ABD9DE4C74E48
-:10E37000514F8E5306E5B66148D723A3511FBBB159
-:10E380002525B1CB4F5E716E3044A3BE3071FD3098
-:10E390004ACBCCD6683C47CAD6ABC5783E9EBA2B92
-:10E3A000263A0FF5F31B0C5173A1EB533FCF496491
-:10E3B000E3315F44E9E9AD418BFDF5DC32BD4B9CB7
-:10E3C0002775777C40E7DA05DD9B618B71DF6D385F
-:10E3D0001886AE37351BDE9D6805916453847373D0
-:10E3E0002ED951B7EFB222DCACDB27A09EBA1DEFCD
-:10E3F0001EC37DF243F586A218D48BD5FEFDF8E34B
-:10E4000078EE3BD71BA251FEFCFC4F702E2A74AE57
-:10E4100091DCF09999D17DE9B39D216EB4DF7FA69F
-:10E420003007DA7756AA47275835E76CC7229CC7CA
-:10E43000EE18673B1FDFBD2B16C7B7BBC83FD3B96C
-:10E440007E74F8607A1499AE6AE772DD2EA9C7155A
-:10E45000FA5E94E7318FF23C1BC3E579CCA33C8F85
-:10E4600029CAF3F8FD90D0E38F6AEECDC4FBA86B08
-:10E47000264B6FA073D7928EF2FA6D4AB01DF9CF7A
-:10E480006D8A3D06F563EC4F11FCBC0DC0AF4CA787
-:10E49000F582CCE547F7D3AF9898BF9FD90C16A16A
-:10E4A000C9CF32C569EA17599334E53F891DAB29B5
-:10E4B000BFC696A9C95F973E5953FF7AFB0C4DFE24
-:10E4C000A779D768EACF73CCD3E417CC59A2A9BFF8
-:10E4D000B0B84C537ED3E2959AF225CED59AFCCDB6
-:10E4E000553FD7D4BFA561BDA6DCC1AC7A3CF73A95
-:10E4F000F09E05707F19EF5990DEF6D6688B3F5E6F
-:10E50000F367E91A06D3D37F2CE8376392E343A479
-:10E510008F041DA743481D28425C10E74A3CF32A9C
-:10E52000FC9EDB19877413582FB03C3FE4D8651B61
-:10E53000E0F0A6892137EB813FE44F3A969D02F93E
-:10E54000270ECDE3F9A9C79E4B86FC6F26DEC7F3E5
-:10E55000571FBB8CE5A39E5F74B31EF84EFE0246A8
-:10E5600022C77387BE5EEA8275E44F4FDE62E77AA8
-:10E570009241FD34FBF52C0007F46F443860EA0546
-:10E58000FAC4F418D027A6AF007D5618187B0DE802
-:10E5900013D31370DFC4EFAFC37D13D337E1BE894C
-:10E5A000E91FE0BE896927DC37317DA76931A57F86
-:10E5B0006A7252BBF79BAA28FDA0A981BE7FD8D45E
-:10E5C00048E95F9A5CF4DD3C51EA2FBCA47F917668
-:10E5D000A67AB4EFA17EEEB0E1BCBF1D56DA09A564
-:10E5E0005DB0B9817585E03EEDD2479C35F9EC7D93
-:10E5F00043F3593D3BEB27876D8D75444D24BDC6D4
-:10E60000482BD97BC4F799CA820434FDCD9DE01C08
-:10E6100081E50BB3CA378403FF98FE6D8301E9E5FA
-:10E620003DE1A71AD8FF855C2E0F1B2639464D8485
-:10E63000B4C0C4FDF00A4CDCCFAE40DFD58CFCA8E2
-:10E64000F92B66433F9AA3A146E24FCD77E9DDA8B7
-:10E65000A754BE64949F16C528DFFC5527F9E5151D
-:10E6600058EDB174DE887CBFFD1CFFFCFC65A43D49
-:10E670005BFAC9147ED9350BE5806916A32D28C035
-:10E68000FE8E76EBA3A1EFCBF9301C4FDAC9777C75
-:10E69000C5BCBA093E7B7881A93309F504D3D69A63
-:10E6A000ECFEFE3FD2EEAD7CD9A9E27922FD7CE4FE
-:10E6B0003872BEA17AE82FCBE7C75360F564A25F3A
-:10E6C00043739D85FA8B81EFC62CAAE750A99D273D
-:10E6D00013F5C0D36A2D76D46F4B7B7B8C5837D41F
-:10E6E000A375167EE9247F8369C2DF00FB31F172D6
-:10E6F00017F6332DCA1BA7C7F53718EDA80F7D4CA9
-:10E7000081F6593EFB3FD60FF1DBBF384FEC37F5B2
-:10E710006B982FCAED0E07C17781BCBFD9445E9CB0
-:10E72000CFCC3493F457AAC81F9BE07422DE8B83AE
-:10E73000AC7F0DA17D9E92807A8E79426EFF0E7A1B
-:10E74000598E74F6DFA71707C7F74846FAB440BAE0
-:10E75000917891781E8A8E24DEFDFCB508CFFDFEEF
-:10E7600057A29F40FA1A8AAE243D159838DE11AFA1
-:10E77000E84723E948F9D2B39DD6516BA2734ED234
-:10E7800051201D0CA4234E97CD3F33517F03E9C880
-:10E79000877F84C7BF4E479D2A9EBBFF2CFDDCDAD6
-:10E7A000CB668743D12FAE765EC8457FA02BB6D708
-:10E7B000305FCE66CC469292E52D439407D297AC5B
-:10E7C000FF34D6CF1D58DFF965AF21DC8F2EA78926
-:10E7D00033F0F521FA7F43F8C5BF6196FE1E0E4B5C
-:10E7E00026D0C12CC1876F2BE2F4352749257BC683
-:10E7F000AC8C1524DF330B978F6DF03FD2B709FB3C
-:10E80000FAB5A2DDEC6F8B5B709CD9515AF9FB5ABB
-:10E810002177CF09B0B75F9BF11392C3AF0D90B3CF
-:10E820007F3F51C8D1492C89DFAFB790FC5B28F6F8
-:10E8300063BCC0778A4D65F900F722E6D4E321F086
-:10E84000CA45A303FBFB097351FE1AE6A6F43AE698
-:10E850002539E07A383030FF53D87A983F1E72431A
-:10E86000C92AE86F56F6AC54FC5E6BEA4D34EAD028
-:10E870003BD0F921EEE77AD5F931CA9917129C639A
-:10E88000F07E7CACD04672D831530AC985B89F0C53
-:10E890007EFACADFC3399A0AE7DC713867317D1521
-:10E8A000CED95438EF7E07E72CE6AF4D5FCFB0DD11
-:10E8B0006C9BD6BF47B6BFCE3A8BE9870D7D8E5D88
-:10E8C00037E18591A8C77A23624C21E2ED8D884912
-:10E8D00085B8DE372262743C0D32523AFEF9D4C15B
-:10E8E000E45649AFBEF166D37881F095F00C84A36D
-:10E8F00084EFBF004FFDA4DC81F0BC806730EA4F9D
-:10E900004DEF86C526A39D51C4D385703E58F7FCB4
-:10E91000F8185C47AD89C3655AE3544A0B1A27338C
-:10E920007D36D9995C08DFCF7109A8700ED0B3315C
-:10E93000FD4CCAFF4CD0567A8C331AE7713ECB9B04
-:10E94000061219FB745B7318FA675E7846B5E3BD6F
-:10E95000A656B56DB1A39EFC0D95C7057D7B3C11F8
-:10E96000ED9B6CC7E0FED2B526093F17C1B5ED6A35
-:10E9700007ED3786D6D9689F5C333288FB199379C7
-:10E98000216B6839676230E7332383387F94F882DC
-:10E9900076FCDC857E26025F8BBF2F98EE3579A34F
-:10E9A0001CE3713DAC9069EE05527FD117A5D2F9F9
-:10E9B00050C0D21EC2FB7BE10903DDDFFB0A192F29
-:10E9C0008FE5F6CABE139755DCEF45A10A1B96E406
-:10E9D0008B9B098AD5319B9F3C6DB605339B1FDD10
-:10E9E00086A4476AF2A1F6119AFAE179C99AF20867
-:10E9F000C7559AF26173B234F9E1C55334F5631621
-:10EA0000CFD4E4E39CD76AEAC757CDD7E4253F8A41
-:10EA1000E79F5842C3524DFB518DCB34F5935CD5E3
-:10EA20009A723538EC498A3B75393AD3A3915FF134
-:10EA3000BF94CD6B34F51E0DE37120732C9573716B
-:10EA40001F8E6EBD5D3B2FF54D85E23A6D9C0FBA72
-:10EA5000E07F88DFA2582D5F9C65D5EA1BE21BF49E
-:10EA60009A7CF524E18F34814D203EF87D78765EE6
-:10EA7000A5C173203C00EF762FD68773D505F9A288
-:10EA8000DF97EBF1DC47BB82FFFCD1AEE0BF5EB4A9
-:10EA90002BF8E7D1AEE05F1FED0AFEE56857F02FD7
-:10EAA000CF3EA1C5736EA716CF933ED0E259D2DFF9
-:10EAB00050F898DCA5A583407C4CFD2C802E041ECC
-:10EAC00016C3FF06C3035D1180FE673530D29B7D00
-:10EAD0001F5E1E9B24CE278117C003C5F5F58D0C44
-:10EAE000253C3C26E65FE01D4771B145A8374BF257
-:10EAF000ADE73171EEFE769873F724D8DFBFB365CA
-:10EB0000C5223F9ACEB85D7376ADCEEE85EE9F0AF4
-:10EB1000C0FF84B1CE7D587FF1B0CB8946A4875E1B
-:10EB2000E718BC4F7E28F424817E9C2E1007280E07
-:10EB3000E17695E26F4EEA5A15E4CBDE04E721E474
-:10EB40001BB76634109DC6B2E2FD9530BFD2FF0CF4
-:10EB5000223B4EE9281EAFCB32BA28CE41F2BBD2BF
-:10EB600078EE47F4F2246117B6737FA2A393B83C02
-:10EB70001B6AB792DF7159068FE3806B5762E978A1
-:10EB800084CF9BE631089F366E37E9C278E1285F73
-:10EB9000BC30CA9B28DF2508F9AAF9CF2613AE633B
-:10EBA0004C3BD39C9363DD268DDFEBB8DD564D7E69
-:10EBB000BC275653FFEAC3364D79A6375D539E7D79
-:10EBC000C2AEC9E776E669EA4FFAC0A1C94FEE9A2C
-:10EBD000A3A93FF5B3624D3E9EF53E8CF01DA5F016
-:10EBE000FBFE3793B8FF14EC55B2E3956E8AE071E3
-:10EBF000A0420F20E569E90FED14F41D28A78F321C
-:10EC00007239B5398EF17B9849DCB798565E770A30
-:10EC10007F6629A73297D69F59FA31F7CBF5426E16
-:10EC200097F2B19F1FB3C3DF8FB954C46F079E7FA4
-:10EC3000863CAE1F099CFF28235F6FF3CF8D1437EE
-:10EC400022E715381F6716A7DB9DA6C1E37786E587
-:10EC5000713DC1F8CCE2903C481F37D8DDA447197C
-:10EC6000309EBDCB85F7CA5F1AED77DABE7FBCD286
-:10EC7000ABF97A4A74BA5BE76590BFD8E267FDC624
-:10EC80004F11E3064D51065D5F6938F7E762E146D3
-:10EC90001BD2EFD0E37178C61A590BC51909BFFF13
-:10ECA0005BB678EE1D034525C65603292F98DB80F9
-:10ECB000F4307726C853998C1DDAFFEC2316906741
-:10ECC0001E6FD4939EE7AAC33125AE545F1CC7289C
-:10ECD000B86F207DA0CC82F7944727737FE5EBF2D5
-:10ECE000F8FA8AD46FFBFDEFC97EC198382718F96E
-:10ECF000C30C426F4487721D3F963FBEA4DB403871
-:10ED0000C9FB2513FE8EA9625E127E723F48F8C9C8
-:10ED10007808DB6A43F193168AAB98837E64127F8E
-:10ED2000BF9DCCF9D12F053CB01EF2A3A1EA15A9D5
-:10ED300019E1A80FEF63B670EB77E87B7FC4380565
-:10ED400082FF50F15543F187017C618878ABA1E8DF
-:10ED500093FEFE89B82B3FFEC0FD7A043EDCA93A43
-:10ED6000B2A36F0AD5EEE3A7047F9827F6139CE3BE
-:10ED7000964C2D9F60A8BF6FDEA00A3EC1CF6F9456
-:10ED80006BF0FBF20D063A4F192B7E10E3883E69BB
-:10ED900033907F6B81C336DBCEEDF324DF90DD0B48
-:10EDA000A656E6D29EDB20473C89F789E9CCBE1106
-:10EDB000ED19E59BB5E52B2CB33F47B96179C0BD93
-:10EDC0007485B8AFAE08B8976ECB13E7B19DD9493B
-:10EDD0001E1376FE2A51A79F8EDC29E142EF42FBEB
-:10EDE0001352F20B9370B1A1BD26DB9707F805A76C
-:10EDF000E339DDA21FD45FAF1F7E43F8239C477F1A
-:10EE0000041BEEF73E8AB7EA3B60E6764A690F12CA
-:10EE1000F5CFBB2E5339D6C7DE2E64764E4079A788
-:10EE2000DF7E146087EAB3E8C2F2B0BFBD06EA4FE6
-:10EE3000FA5B54FFCD3DC1EA674F7676A91AFF967B
-:10EE4000C0D4B9FE20F95F6C8A70BE8A7CFC9CDE5F
-:10EE50006E42FCDD6539168D71F27385DE2670BE5B
-:10EE6000FDF26DBEC2EDB02E1E37DB3747213F00ED
-:10EE7000E0830CF78DF41B98C7BC51984A7B8C73C8
-:10EE8000F36482B3B4C7947927D33C1736AF300408
-:10EE90004395AE87D71505DB7C769AAE04EEF73343
-:10EEA00094BD66C1954CEAEFC62B53A99F337949AF
-:10EEB0005CEE6AB97735D2D155BB9901D7D915E047
-:10EEC000F72ED31B27F3FDB01A633172FDFC89D6F0
-:10EED0002B44E76B1426FD8B884FCBFCE556912F16
-:10EEE000E2F9DB36F07C9781BF33B34BE81B709DB2
-:10EEF00098E27AF05EBC57E823701D98E23AF03B46
-:10EF0000F225CC235FC23CF225CC235FC214F91258
-:10EF10007E5FC68A1333556E572AF4DB3768572A4B
-:10EF2000F4937BD0AEE49F47BB927F7DB42BF997DF
-:10EF3000A35DC9BF1CED4AFE79B42BF9D747BB923C
-:10EF40007F9EE55DE3CB231F73CCD3E417809C5FEA
-:10EF5000E8B76FD1AEE4DF3FDA9534FD39576BDAAD
-:10EF6000DFCC1A35EDD1AEE45FFFD646456377BA04
-:10EF700055BC0750DE3E8CE863EF84E2A4C980DF15
-:10EF80008F43FEFE3303DE37D48E9548B76BEA829B
-:10EF9000ED1CCFAD7338DE758CE3B97709E1799D4F
-:10EFA00091E78BB8FFF160F69B4203B7DF608AF60A
-:10EFB0001B4CD17E8329DA6F0A4773FB0DA668BF0D
-:10EFC000C1EF68BFC114ED3798A2FD0653B4DF60EE
-:10EFD0008AF61B4CD17E83EDD07E8329DA6FF03B1D
-:10EFE000DA6F3045FB0D7E3F897624BF7733504E74
-:10EFF0004FD5DC1F810E35F747AB268F72BA7F7D68
-:10F0000094D3FDCB514EF72F4739DD3F8F72BA7F36
-:10F010007D94D3FDF3CBF36CB4BF505EF76F87F2F2
-:10F02000BA7F7E7CABEB55D41D5DBFEDE22B9876AD
-:10F03000852A8F2BC00A964DDE578276B62EB39264
-:10F0400018019CD2B0FED99242D8B34EE1C73781A5
-:10F05000F5EA10DF646707BC39BD8CFC8EC77F13EF
-:10F0600047E5D2AE4B7F80F7CC038CE4FE43225EB3
-:10F0700053B6B733AB8AA9ACEFCB0F5E2F707C5978
-:10F080008FF8A5DF3CE06298897E2699EB2C59E841
-:10F090002FBF4BA7707FD33BB9BF6F205D3D28E4E6
-:10F0A000A05DBAFDC782D17FA84CB1631C439A9E74
-:10F0B0009D3064219C1AB2503EB8637284F0076E92
-:10F0C0009882FE4772DE520F087C82E2D7F27B996B
-:10F0D000B102C699F625332E47FE6EE47201B6C31F
-:10F0E000FBE23897E278D28FBE374FE6E79BD3B585
-:10F0F0007A4A057C1FB7B7610AC6C5CD0DE6ED7E1D
-:10F10000F34418C1F18616E5498C3FCCDFCB1C18BF
-:10F11000EFBA55F0D3717BADC60A1AD74AF174B273
-:10F12000DFB26D8914FF57C6BA0A31BE82E5280CDA
-:10F13000EDA3126EB0BE57707D69B0550C247FF2FE
-:10F14000B89C60119723E37182228A17E6E5FAE200
-:10F1500072A6E54414A15F1CEB60760C03BE3EA7CB
-:10F160006CC370E8DFE976D8D1AF68DA970DAF529B
-:10F170007E4731E5890C26D23874AE8D7129F4BEF4
-:10F18000C60DAEEDBA281BC6EBAE374463FDBDCC51
-:10F190008EE20E1C3514772AE797C13A756605F1A1
-:10F1A000CE8E0FF3A323E0003722DE33ED067A7F05
-:10F1B000639EDE6A40BE11788E0FF45B0C901302E2
-:10F1C000FC4B9AD77D90A826A37F89CEEE45BE75CD
-:10F1D0003084E40529EF94097FB3CB2DAF0EBF092E
-:10F1E000CACBF673F9C0D9AE10FF93FE267529EE8F
-:10F1F000441DCA0B23B64F8854F9F98F7CF19CEB60
-:10F20000B945B845CB36BC4A7111651B72C3795CF0
-:10F2100014B7435408385508BF2296618D4639F318
-:10F2200014F01DC718F24B0CA7B8C2562ECF49BD1B
-:10F230008E9407E5FB31656F65BF86782F7B4CBCEC
-:10F24000CBB2B98CE2AF02FD7C6A84BCB7B2C540D8
-:10F25000FE432B03E4C11AE12F5413200F9E9C2C74
-:10F26000F440521E14F717E9CF5BF6D6F18524AFB0
-:10F270003418C82E57B29ECB2F6C3F73633C43C9E2
-:10F28000FA593A7C37A4E4A0C3AE0C42276F0B397D
-:10F29000666E9799E03AFF4A3CA58BAEC4517AD38B
-:10F2A00015EE4789B12F48075D2F3092A3DF157205
-:10F2B000CB42F4ABC478445790F09F642437653256
-:10F2C0006B11F28FAB1CCA7114FBE61A9C1BD06F3A
-:10F2D00073EE7646F147D7A37C03FD2F467907F5F9
-:10F2E000EE39494514873147A17896EB73560BFAEE
-:10F2F000067A6748EF2E41BFC594EF3F17049D3B48
-:10F300005DDD7A84FBF52EC588EFF039C53D56D218
-:10F310007120BD978608FD9385EB97FAF54F385914
-:10F320007AD4C6740BFAB796A26E7004E388079875
-:10F330008766F0F2D829A65B5AF052F3DFD44B94DB
-:10F34000E8743CDE09E42DE4ABB7ACCD342EF3E336
-:10F350002F9F4C9D39696AAE0FEFCB02E2F4D6DCE9
-:10F36000353AE6BBE245CB01CEB84F4AC3BB7E0679
-:10F3700014CAF2A6304721889E4B985C27F3A25FFF
-:10F38000E052915F3E25F3AF9B33083E94CF793135
-:10F39000FA1617F155CEB76E46BEA522BF72664D5E
-:10F3A000217ED5351BF11192D12BDE21E0F10E81AA
-:10F3B0007A88E553381E02F511E5199C9F33BD2D5F
-:10F3C000F1668A0BB6913E4FCEFF94411BA729D31D
-:10F3D0005BA670BEFC63C537FCAF14E70DB8BE0773
-:10F3E000753C6E7E84DACA845E88F6BFE41F4CBC2E
-:10F3F00023E1C33FC869644757ACFEF8776E56787F
-:10F400009CFA10FA1B96DEFBF04ED4DF351919C6B4
-:10F41000B93E91C6E9E889DB8D248797183B5FC523
-:10F4200077B2241C3F6AFC0F03E9FF997734BEFFD3
-:10F43000B5B4C16C47FEFCC9D4E28A29C3111F765A
-:10F44000C2C724D866D8FFC984E215F8BD6ECBD1F7
-:10F45000C7316E7F554712C591961DCEDC88EF8966
-:10F460007C32D5598BEB2DB3588D788ED7B744D0DD
-:10F47000B9561A23E23A592FD9A924FC5BA6F0F316
-:10F48000744A3EEFBF47DC479061CED3D4137EDC95
-:10F4900001FB44EA0503F50B81EF380CB57FA41E90
-:10F4A00001F506463FBDA2D44B18D24F2DC173B40F
-:10F4B000C4A88D3F94E941A97713F7C1E5FDE7584A
-:10F4C000C6EC18949BB72A563CC72A2CB69B2643F9
-:10F4D000BEE284013D30D9DC481B7FBFE32EFE7EB7
-:10F4E000C732D8AFC86F4A843F5645FB64DA6F1500
-:10F4F0006E48B387DE97376F3D9EF002D28FD741BB
-:10F5000071F915568731D26FDF97B72A9AB87E996D
-:10F51000DF3945A5799780988EF0BB656D9211DF34
-:10F52000D02901F102FDFB0E4EB169E2AAA11EF93C
-:10F5300035CC4D66AFF1F79360DE497CBC2CBFFE45
-:10F5400097B56ADF2780FA2417FD764A28E1AFCC09
-:10F550000AEB4EC2D44AF30438109C7AEF85FE6C55
-:10F56000340EE1A3DCEB36E0BDBB04FD2920BFD4A3
-:10F57000EA36E038CB5AF87B21CE2D7C1CE7E60832
-:10F58000E378949BF4566302C20F2FCB51343FE2D1
-:10F59000831500178CB792719781F02913F3AD682A
-:10F5A0008DD0CA63AD5B0D888F2543BC57D02DE845
-:10F5B0007659CB0C8A37AFD03B289EC129E0FBC9D6
-:10F5C0006AF3DD681758D2F6902109F27F14F4DB54
-:10F5D0002DF6DDDC64EF687A1768B5D98EF35C62CE
-:10F5E0006DA5F5F5C3F701808782EFCF14137C81F9
-:10F5F0002E5CE89F57D1A6C5A76F3E1CBE156D6552
-:10F60000B4DF2AF54EA3D57F1EED4747A31FCA12CC
-:10F61000D8DFF8DE11B33A29BEE9EC033725D23A38
-:10F62000619EE40765B7CDC6777E804E888E25BD86
-:10F63000C8B86C39DE3753785CE637DFBB2F1D2442
-:10F64000D734037E51DF3DD4BE346260178C6BAC7F
-:10F65000E0EFAF05EE53B93FFBED07629FCAFDFB3C
-:10F66000B8A1D81BABF8F80C9CB70DCF0E02A74978
-:10F6700053F97C970ABC025C5FF18FE3B24DE578E9
-:10F680002D49D6EE77EC0FFB0D93E533BDA331EE9C
-:10F6900052D697E39644F27648F7486F61623CACE5
-:10F6A000BF86EA6BE351CAFBF9C5DE0DD1C82FF660
-:10F6B0002B24F7AEB9F778C2BFA33CBB8FCBB3E71F
-:10F6C0006A77D6C7A1DCA87727FABF8B55E1E5FC9E
-:10F6D0006139C83FC82F2AC539BD2FCB9930D5CF46
-:10F6E0007FA2E2FE7D694ECE5FBCC85FFEB2EFA591
-:10F6F000F7A6D87CE7A79CFFB2CD7F349459FCE1F4
-:10F70000C5D777777A1FC5D9955B8C36F45F2E6F96
-:10F7100029237ECB62E15EA1F8F01D4807652D0A22
-:10F72000BD2F56DE38D1ADFE5FE4CBE55BE6D19B65
-:10F7300048124FF2BD13799ECAF93BC4FC970A3AAE
-:10F740009E3595EFBFA55549C64ADAF749C672A45A
-:10F750007F51BEA442FBBD1F4FFD76EC8C8DB83FA0
-:10F76000306E88EE275B0C5CCFB73794E4D5736BB3
-:10F770009EFFC322A8F7C583DB13513E91F35821A6
-:10F78000F479CB855EAE52C8AD80A7F953FDF8EC95
-:10F790008A27389ECA9F79EBAFF82E5749B2E067A7
-:10F7A000F7F278FE659EFD84B7259BB71A92105F2D
-:10F7B000F848AD5FFBF206B8E8023C976EDE6E409B
-:10F7C0003EB04CAE3780DE4B84BFAF842B9E3B8A6D
-:10F7D0009FDD42D647FEB71FC659BBDA1C86FA69C1
-:10F7E00039CE3D53B9DC54DE101189E3953794FDD1
-:10F7F0000AEF1D92DF07EEBBD366BE1F96417FB8AE
-:10F800002F4FCFB0535C33DAB5063B57EF9CCACFCE
-:10F81000D5470DFCFDC6F810CF1E8443FCAA603B03
-:10F82000F287D4D42EB21B233DE3BC8D3AFEDE63B7
-:10F830006A6DD7259C0788D4E49F8229BE33852230
-:10F840007634E49FD4F1F8AB6495A7BB057CA0DCCB
-:10F850008BE52CAA8BDE9DEB7F3729805E8D6CC7F4
-:10F86000667CEFC618C5ECCD361F7DCA7E247D4A66
-:10F87000FA1D6A7DEE1FB8BED349421F916E4FC478
-:10F880003895D2FBC6D8513FF37DEB348AF707FB9E
-:10F89000D70BC49A1739C87A53F9BD65E8F5B61580
-:10F8A000450FB2DEC075CA7D227DDAFBED0BADDC03
-:10F8B000BE705A81F30BDA9D5E6D26FF2FB92EA91B
-:10F8C000FFFEA17108AF4C8D147A9DAE5094234B6E
-:10F8D00082C5FEF7F23C7E9FE7F75D9EFBF2BD36E8
-:10F8E000C99FCF3488739175DD8BFB9935A6D0FB0A
-:10F8F00024275B4F87E27B29A767F0F9C9766B0D58
-:10F900003CCE98851A6DF8FE21DCAF4E36A2DDA7FD
-:10F910002586EE91B734A6105FB8C515C1F50F4224
-:10F92000BEAF147C30646DD9467CE77B797B925501
-:10F930008171965BEC67DBA9FD383BCA83216DF3CF
-:10F940008CC924F7F27B80B413AD555831C58D2195
-:10F950009FC4FDA53B9A8AE7CE8A767E0F98AB635B
-:10F960009BD14E38AAB978761CF28987158A3367FD
-:10F97000DBB4EF58A567177F4CF7BF8077E0D61A46
-:10F980003C8E18E4E3206FA0BE69B9A598E4F65256
-:10F99000412727DBBAE93D7A09D701F13F461E0727
-:10F9A000DC1BAA233DDC0F8D03AA1076254937D234
-:10F9B0002EF508FE6732C249A573AD482DA1F79414
-:10F9C00036B6CDA2B4626BD183AEF1187F5C1C3D1C
-:10F9D00085E66D203D5945DD2C1EAFFB645004DEED
-:10F9E0006F120DAE447FB9B462FB268AFFF96CBB7F
-:10F9F00099E27F0AADF30A23A2E8BD638AAF93F5CB
-:10FA0000C2F3F979515D374B13BFB31CFAC4773693
-:10FA1000BFF284901F9A8CCBA98D7106E7E7F2F8AC
-:10FA20009CC9361E971347F56D83EAC5657AB6897A
-:10FA3000C779F8C51BDDB004DAD7D63D1786FDD4EB
-:10FA40003CF0EE44AB8EF450D1F9C3FDE28DDA798F
-:10FA5000BC518CB82FCD8D2C5EB404E1FF7B95E0BA
-:10FA60003FD4785587158D1DEF167738C9AD4E2FC9
-:10FA700033A21DD9696524177FA6B2469403A4FC5E
-:10FA800022BF5F95CFF9D567E1AD89481F2B773D40
-:10FA90009488E7CBE7A13C5FB2EBA6D7915F3977BB
-:10FAA0000471F95CCF481E2E7771F99A5545CAF753
-:10FAB00048CDA5404739F921FCDDA3766DBCB97C62
-:10FAC000E7F6733D7F9F07E38D90DE3FD27B972360
-:10FAD0007E3F02F915EFB1E1F99C3E3F6A5567930D
-:10FAE000DF106C1494433E6A7D2E14E3A1A5BC562E
-:10FAF000A4FEC581EFFFAC39C8E382F17D7A7A2B91
-:10FB000054E841EA851E64CD0B86D9F151247FD19A
-:10FB1000975ABDD73818FEAA857CD59F3FB09FEE77
-:10FB20006DB57BB9FC50EBE926F941CA2332EEB042
-:10FB3000666F37C913B25DFD010E97BA03FC7B599E
-:10FB4000BA4EEA511C4A2ADEA715CAAF9E9251BA94
-:10FB50005E931F57BA5E8FA9D0DBEB7B491EBC3B7F
-:10FB6000FD1DBA87D7B5887E216FF01B6F0912D1B2
-:10FB700070FE3DC582ED6D1AFFDABA0311D4DE5B6B
-:10FB800017BC19CF7947BD458F69739D85CEFD6D33
-:10FB90000DBA74F4537728C17694E33A84FFD6F013
-:10FBA0009AF7CDA83F8863BDC7F1BD5D6F82B316DC
-:10FBB000F7430CBEEEA2FAE2897A8E7C9A8DFD178D
-:10FBC0008CEABA8C6F6A18D64F2A453BC5DA7CB1ED
-:10FBD0008E8CAE6CA4EBE1C7387F7ECCC036D3BB35
-:10FBE000CDFA6286FA7BAFB02FBABED1D1FBB31D7E
-:10FBF0008AF7D7FEF2D51EB16F8B83B89DF1FE094F
-:10FC0000CE5FE23C7EAA18C667927FA33A1AFBEF4A
-:10FC100011764829A7CE14FC3941DCAF8C23622D24
-:10FC200048C7D2AF4F713828DEF3CE8C63E5783EFB
-:10FC3000DFD36BA2788199BDC124B7268C9843E7A6
-:10FC4000997CB75DB1E95909D43F96A1F3625CDCB8
-:10FC50003DCCC4FD024C01F2ADCE4CFEC94AC7EF0B
-:10FC6000BE41BE1EAF5E3A1E8EFEB2FFAED0FBA3FB
-:10FC7000A57D671F7B9BE17DD89D49F1D009CE878B
-:10FC8000108527FBE6743B0175F7583D263B3F2F57
-:10FC900098FF3A3A7EFE4D58A4CE37BF9EDEB3F4AD
-:10FCA000AE634FAF89F4B6333BC43B8701F3E989B8
-:10FCB000B5919F34D42379B3C7A2A3F7DD66761C30
-:10FCC000A7F70A67CAF70C4DDAF70C992D2102F550
-:10FCD000CAA44B05E120BA99E3AF205C7B5FECC876
-:10FCE000E7F26287E02381EFDDCBB81579AEBC6C1B
-:10FCF000D9750BD74BF17DBA4ADAF9AF24933CD1D1
-:10FD0000D791F29DEF58BC8B7205C80BA7AE76BC9D
-:10FD1000923FDC77AE2E147092E7B38C5B5828E0EC
-:10FD2000B5D0A2E3F009F8DD1549378174E1C33B92
-:10FD30008FF792F864B777BE8AF15880C7F1F73130
-:10FD4000C2DFDB488F27BF7973033EBB3042757437
-:10FD50003B937E14FCD1FBDD3F187F9D81F8F39A25
-:10FD6000C7A01CF1808EE408E9EFE814EFB54BBFA3
-:10FD70004796CE881F94AAC1A42F748A77DA810F80
-:10FD8000BC8A7C40EEFF5173BAC6E3397A12AEE802
-:10FD900038BF2E9D87BE874FE3FE862359679CF0B0
-:10FDA000CFC945F94DF5BD4F4D74DFACB81FAE441A
-:10FDB000FFCB8516F273EF7107BC4F2DDE31EF617B
-:10FDC000823F2C96EF98C37E86766D4B7879FF3B09
-:10FDD000E6A319DDA3DA32591ACA5F6DE2777F868E
-:10FDE0007CC77C6524E94D1F79C43D16CF03F97E9D
-:10FDF000F5F404A779DAF081EF573FA8142FC1DF9B
-:10FE000081718DE7F3ED5A12FCCC2E0E6E2FEA7B3A
-:10FE10004E3686D2BBDD924EA59E7B94ABFB6184B1
-:10FE2000938CABFD58D09B84BF8C2B8C0AC083A4D1
-:10FE3000BBFEDF8B59C7E9AFDF9FB69E913E6524BD
-:10FE40004C2584FC23ED3684EB3D89CE249C7FF346
-:10FE50006A8033E9D1B99FE749F17B1681FB2963B9
-:10FE60009A4EDA89295EA0549C6BA5323EA0511BA4
-:10FE70001F10F8BE69F0C8E209D3609D1794772778
-:10FE8000E2C737FFB73AA8DFC9A4699C8FA7C63A73
-:10FE9000274EA3F36DA6468E7C33F3D304FA7D99E7
-:10FEA0006F8F8FC473EFA684E2C9D8AF3995DB0D8D
-:10FEB0003E8EEBA2F88E8F97FC2D81F4CEEBF8BB33
-:10FEC000AC3F749E03E399391DDCB69CFB23C6B39B
-:10FED00006A2DF585F9CAC19E7F13F2D9ED9176F42
-:10FEE000BC9B7E57E4E5264FCA99D103F1911F745C
-:10FEF000EC391BDC681A8E1C2AA5F8DEF063B725E6
-:10FF000041BEF1C84B3C1F7FEC7212E0E6F6231DA8
-:10FF10003C3FEED8658C075E77E44829C5FFA2DD3B
-:10FF2000600463771C79B9D405F8A89EE06C427C24
-:10FF30002DBAD2F02A1EC3EFAD9FBF3C89E259E72C
-:10FF400025A4F378D6B558BE307AD98670C517CFB8
-:10FF5000BA6D1AB4037AE8B9C4E9BFE712A7F7206B
-:10FF6000E403C3FFF554C6F54AFE3B149F94FBEF30
-:10FF7000C78A4B96FB98EDB26F362031BAFEE57812
-:10FF8000E14768DF04C40BF7187A1F277BD2256688
-:10FF9000C338C4A3A1EFDBF09C68CEE5F18C4A6FB7
-:10FFA000A70DFD30F27378BEF952A70DF93BE6516B
-:10FFB000AFD513C1E31C653C6CF3256F1CEE937C3D
-:10FFC0008C5B84FA85BDBDA5C86FF2D18F3709FB64
-:10FFD0007FEDB8188F617F3B2EF178C31E73A7CDDC
-:10FFE0002AC6C17E60DC24E48BF96B4DE46FD47CBF
-:10FFF000A96135F55362E91F570918D7F4DDE3CE3F
-:020000023000CC
-:1000000052FCC64DEDE3719D38AE4D33AE97E281A3
-:10001000A13F8A3BED89B0C7E27D5FE60BB11CF2E0
-:100020000F89DFA7C8B77955E4FF323E2AC628DE1C
-:10003000E116F715A847F1983BFAF83A2F3679AB55
-:10004000713F150A7E5D68E4E725D305DBD10FBB60
-:1000500048FDF6B578BC97BCC0EF258541C5DB707F
-:100060003FD6EB39BF6151F277D23A57FE06EABD6F
-:10007000131D4FBF2B3632F6104BC57BF1AA391931
-:10008000785E80BCFD11E2FB1DD6AAF0DFDFE2ED59
-:1000900017CC0921FF939E23637271FFCC0FB21D11
-:1000A00064B06F4F4DBB44FB747EB82D176F3AA7F9
-:1000B0008E5CE6F918DB41B4EB9AD8A5D242BAA718
-:1000C000713BED4D3E3BEDA7B82FEBE65C3072B9CE
-:1000D000AC97DE673E378D9F5F20B793DCD17B8D79
-:1000E000786F33C3968BE58986DE30845BCFB77A31
-:1000F000FE5E2DEB0DBBD1CF2EFB78077FC7369070
-:10010000AEF715F0736055AA85DE39AB8F359928A7
-:10011000EDB8349B7E07465F9C8AF7028771707D3D
-:10012000E313055CDE4CDA68F4D9DDE1FC700433DE
-:100130009977B13CC6B6FF5B70FFBD0B8F18E368C3
-:10014000710F73599F284CD5D47760FDFE72C69FFE
-:100150006793ED47BEAC7F02EDF8341EE2B992FB27
-:100160004D049E17A5D32335FE568F4599C9DF2A26
-:1001700055157A3CA86B257D20B7DBC6FFA799E211
-:10018000E77698391DA6EA78BA4327E27C859E4F28
-:10019000DE5F7E31DD397E7A2EF5E3A57ED4FD99D2
-:1001A000284FC4310F8D2FE532590FE42F33311909
-:1001B000F13B6FF9AA6E5078BE5230C351908B74E8
-:1001C000ED629FF89D131743C21AFDF157AF6AF510
-:1001D0009DAF14CCA476B27D5DE32CF609C5217ADF
-:1001E000897EEA5275745FAD57D92BF47B03AC93CB
-:1001F000EC98B2DDFBC0273FA1F71A1C947E00FCEF
-:10020000F213F2F35B4CE95F9A9CF4FD645315A57D
-:100210005D4D0DF4FD545323A58B6E0ECD41FA5F59
-:1002200075783DFBC4EF7CACF3189CFE7E35EFCFB8
-:10023000189C8E2A051DBD9F3478795301978BDE5B
-:100240002FE0F8EC59CEE54BA0CB166BE4D0F24290
-:100250004F28F747786926A7F39E389E7716F077E0
-:10026000421D3AD68EED5F9AC9DF617F3F5947EF55
-:1002700039382279BFEFA7E9484EBB76F68C528415
-:1002800093231ABE67F9F2EF5FC5CB1D23F87739C8
-:100290005F593E7E7ABFFE208DDF8BB9DD1DE89D64
-:1002A000FAEFC76F219F5F607DE9471F088FA36248
-:1002B000DFD2BE40B91DF74192DFBEA8B7D1BE90D4
-:1002C0007428E9AF743A87736A90A07338BB087ECC
-:1002D0007886E1BD38C64C72AC03ED16B09E1D2287
-:1002E000CE7DC07E107600B91FE43E90F41E0FFB59
-:1002F0008CDB39F83AA6A983EBE73715F07B6A6700
-:1003000074E8CF08AF1D062B9E37D3546E6FE8E913
-:10031000589883FEE0459B2C0D83F1AF9745FB7FFA
-:10032000190E921F0C018701EB370A7DFD3FB97E44
-:10033000E26FC8B797737FCC407ADD5B20F915A7D1
-:10034000DB570A1CBB907E7A14B31EEF273DE6C133
-:10035000FDC75F9AC9F785A49FD2E94CBC3F03EB68
-:100360004C19C8EFE47AFAD7B98211DF4B1571C680
-:1003700081F895EBF2E37B1D057E7A27C6405E810E
-:100380007E46D65AE87E2AE9F7E2F06F2AF1FC9A17
-:100390005360E3F6179D2ADE81E5E749FF7745A51F
-:1003A000782BBF7386A1DCD27B84DBE1BC704F422B
-:1003B0003B16EA9EFDE3ADBF16FCA26F71AE0EF5D3
-:1003C0000317BFB6B8F0DCBA38A2F724CA2517DB8A
-:1003D000F93BE7D0E35C05FD4530EEC786BFD7C2E9
-:1003E000ED1FEAC35F9D4479A8F26195E4978B788D
-:1003F0005D8676AB1EE0BF6F27FD066B45BBE6F65C
-:10040000CB8BE877CD803E51FEF9C45C9F8C72F1B6
-:10041000AC871F3881EFAE571E5450CDCC8EA3BE93
-:100420001DF26777ABFCF75545BCC96CE1D75FBDE2
-:1004300093FBF5D7629C09CA2F07B63F88BF3B598B
-:10044000B7DBC0CCF07D36BE8F06E3ACF084C205CE
-:1004500012FA6DD3C6A5FE84B936A21EB96A9BF600
-:100460007BF50E6DBE36C05FF15281F04B1CCB3276
-:10047000C92FB18DEB8925DF1E28EFBA387F5C23A9
-:10048000FD74BFA477BDD5235F259EB2F0FC3C91DF
-:10049000EF86FC85AF38FC25DCEA05CFBF10C772BC
-:1004A0003CB0BEFA23662BDEFFEB5FE0FA818B9E49
-:1004B0007082F3AAE02EB227B017552BCA61771DC0
-:1004C00056499F50D761FE35FE1E6DFD4185DEA960
-:1004D000AD3B1CE4E6F0B95489E52B0E9BAD362C00
-:1004E0007F3188A1DEF922E00DFD612F267411FE17
-:1004F00011AFA88F80BFB9F8BB1512FFEAC3DC8E1D
-:100500005CB947E0A7FD363DE1D5ADB098A4817850
-:100510009278FE9DEEE97E3C61BB590FBFF79AC011
-:100520003BC3389BE3EDE5F47B1812DFC6239F2421
-:10053000A2DC2BF1AC029E7F21DBDBC43B78DF81A8
-:10054000E72AC4B3E59FC7F3EB054CC6FB9D7D14BA
-:10055000E5DE5023D9CFA53E43EA2F86D7BCFF6AFC
-:10056000140C3C3AF63992734B23CFD5AD66A43FB9
-:100570009B341DF59FD7BC853FE7CBDEB9F6E94C30
-:10058000A48F664317FD5E8C2B82BF27DF93346FE9
-:10059000DBF3305E61E43789FB71DFBC1C4466939A
-:1005A0005982AFE29FC9FF3DC00E33E9D9EA3A82D2
-:1005B000B85EED80D66ED613C77F9FAFC8D85BBA42
-:1005C0001AE572E80FC791F7C19A0EF1BB2FE2FE50
-:1005D0005623F50C7B03DE85B2BE45F54AA627D32C
-:1005E0003C5262A6D9900F352F61CEE094EFE2F72E
-:1005F0005C7F237F276F48397008BE2FE53FE6D226
-:10060000EA3924FF59217E57B27F7F887CD57A57FB
-:10061000984925BAA378F1DAC7F8EF2A7E8A7417C9
-:10062000E6A3A77A1197F6EABFBDAEC7DF67EAD99E
-:10063000C1FD2280433E88FEF9E73D3C0EAE3AA75D
-:100640007BA2D786BFCFC1F9D0CABD8ADB9634085A
-:100650001D31F746FE9E7D003DEDFDEEF70E6F9FCE
-:100660002EE2DDC6B2F1FF00786EC7F8A35C1FBFB3
-:10067000088C9BEC3FBF027EBFE37F5A1C775F066E
-:10068000ACE73BEC8C3F89D5BEDF728D4DFBFB4C5C
-:10069000D7A56B7F9FA9CF22E023E44129A7EE9E37
-:1006A000CEE599C054C2F77ABB761C792FFE699EBD
-:1006B00076BC790EED783F142F3F563CEBF7C1EF37
-:1006C0003531EE0931EEEB62DC7F154E321D6ABC2E
-:1006D000FF9FFEBF49FF0F426139640080000000A8
-:1006E0001F8B080000000000000BB55B0B7C94D54D
-:1006F00095BFDF7CF3CC7308210904C22424216058
-:10070000880324542B96C9D300D6065C2D68840137
-:1007100052C83B80B5D2167F190411105BA8D1A234
-:10072000224E82E1A1619D08C144431D14B288D6C6
-:100730008D748BFDFD56DCF828F23213A374E55757
-:100740002D7BFEE77E1F990CA1DAEE6EF2D3937338
-:100750005FDFB9E77DCFBDD414E718BE9A22446E9F
-:10076000CC59734F8410AE953D4589D942F4BDA94B
-:100770008A268710C2ED3D561F2B446DC770B129E4
-:1007800099F092BEB70CC0DBC6D93751FFC6F63F11
-:10079000BC83FEDE03AAC342FDAFB77F1C85752E66
-:1007A0007C152EC470CCFB384A105E7D49617C13E9
-:1007B000F53B089FD9AA0A7F26AD67F499D17F211E
-:1007C00055C7BD6641B0A4A5D5DC43B06A4F2BF731
-:1007D000BFE9330DEEDFD338A8DF8EF104AB8CDE3A
-:1007E000283BC173EDFA7A7E1E5F9DAAB8BC68DF14
-:1007F000F387B8A518D7F26EDC128297F133E36A5B
-:10080000F8D9C11732DD34AFA683D6891858A7A608
-:10081000C3A4E192EEEAD4D6A218E2976851441A32
-:10082000810B628B5845FCAC6A6FAE16D45E957135
-:10083000B749105F023EB518DFA71F8388A37976FA
-:10084000FA8BF877C1F745D4125AF735DFD1DB5C64
-:1008500004039D6F44E1BB8103343E73809EE92E07
-:10086000E25F0EA059881134EFC01B510EEADFE899
-:100870007B43F2DBE8E77DBFAEE10182CCE7769512
-:10088000F75DF195CAFCD7D7BBC5A5F23A33DBD3E8
-:1008900022B1AF133EF9BD392E876C4F5D5406FA75
-:1008A0008F27CCCF5193996E17F0C0C4D9CD9B88B8
-:1008B000942A1FAD9B7935DF9668EB7699C43C1F6F
-:1008C000E496BABF6B14E9C7F1E2E193A9E7CAB8AD
-:1008D000BB5D061E576476A72EA77127221C917652
-:1008E0005AEFC1E2719190EBEB80682FDE697613CD
-:1008F000AC3C20BF77C2DE1D057D3B7160AAEA518A
-:1009000006D6BB43FBAE101E860372F3B09CCABD75
-:100910008D115867407EB27D8ECBCEE38F7BDFBDDD
-:10092000F36EDADF898C7027E4D26516E53ED613C4
-:10093000FA08BED799D8083EE8DF9B0379D0BC40BF
-:100940008681E5DADB6ED2C6DDDD2C068D33B1DCC7
-:100950002E3C37981EBBF7C35FDD4DE3AB9F51853F
-:10096000859AAB4DCBE3B0FF4FB70FA6AF5CE373F7
-:10097000B5C91F1717A4AFD51D57EC2582F5BB438A
-:10098000B70F07CB5397E3890C55D29560F10A2234
-:10099000B9BAB599F59ACCCD639BC250D8092686D1
-:1009A00077272BB4FFC4FBADCEB544FF738AD66F57
-:1009B000201843B841E266825682CF98643BCC1639
-:1009C000F3C7903815C24DC5E3720C29B48EDA3ADC
-:1009D00019727D7186EB5117EDFF97334A26CD20B2
-:1009E0007842F42D15F4CD9A8B111E112D44A1FAE5
-:1009F000FE13F86EFF019380FFA8B176547E427A11
-:100A0000DAEF244321BAFBB79BBC1ED63F57843292
-:100A10004D88A53748BBF9D4E19EA68EA3F16B0C97
-:100A2000BCBFEA16D56BA371BDF5C40262F967AD10
-:100A3000C93F82BE561F53ED56DA77BE2FF9D7D382
-:100A400081B7989C169A5FEBA346C26BF7285E8726
-:100A50005C5FC02E6B6E605D17A76DB529228BE0C1
-:100A60009A3E33C69D3EA488C768DC2361514DA0E1
-:100A7000BB2673D659258AA0BA797D22ADB76C9B67
-:100A8000E9A31EAB9C7B99FEABEBDCCA7A5BE11D54
-:100A9000DC5EB567305E238C0338ADDF8C3F6E14AF
-:100AA000A2CD15197BFA3AFA7B82987059059FA658
-:100AB000C7C31E8E43AEC447D140CC1E29C4BD93CC
-:100AC0009CF1B0FB8D46C72CF021D069B2835F75D5
-:100AD00087F657806E6F7598D3405BAD5DF52AF34E
-:100AE00035F025F1FD7A820982F71F1092BF8176D9
-:100AF000A9E77526C56BC57CE221AF6755BC6BA81D
-:100B00002BE0E98F62FF244431EC62E5FC1C03FC1E
-:100B10001CCC581029BFD6ED41B11995684069FF2A
-:100B20003F30F6A8C382FCC47FB95298FE02B3706E
-:100B3000FBA8FDDE486734F47EAC352A0B748DB516
-:100B40002679C1F7B1C6BE35F8FE23A314C783B416
-:100B5000F4E1AC57262BC06B239CD0132561911177
-:100B6000FC7864D42223F47DACDD97519239801750
-:100B7000A01FF620BCFCBDA208B711DF796EA4E26D
-:100B800037D0FA011BD1073B31DA4DA02F6092B864
-:100B9000106B06D1471E89F1FF77FAEC445FC40061
-:100BA0007D24EF68CCFF229BF84330698E10DDEC8A
-:100BB0001796B35FD0F97981F4BD806495A648BDDE
-:100BC000A9DE7EB808FD35A27B3DE61545C97D143A
-:100BD000613FC0C3245473A5BC7235785FAE8C2FBF
-:100BE000BAFFECC8751973096ECB2D310316AA999B
-:100BF000F13D43F8FB958A95F5E40BB23FF8E37BB2
-:100C0000962BF6D48C01FDD6EDAA4E365DB19FAA87
-:100C1000DFEF348B147CCED59D41FDE542DAF5C281
-:100C200055367B6AB01DC1CE881FE5F68A5B05D9B3
-:100C30009B7B559C3D752AB5AB17CC02BAA7D957FB
-:100C40002CFD5E4E19C2BE7C2176D93E18F7DBA47E
-:100C50009EFB2315EF5AA23F3577B0DD256976D08C
-:100C6000E856787F8D5F1B19F7942A5EF0FC0E6AB8
-:100C70005C15A36D0EE3CA73BD888F77105A8AF690
-:100C80008658B653EE24FFF52FDA3EEF30FA0FC345
-:100C90007F1C35F992EDD475B4C6EAC4FAF3052584
-:100CA0003AE4D74A4537C393E1B56D7E5EDC33063F
-:100CB000FAF59EDBE2441ED6B8AE29127E3C4BAC60
-:100CC000B39FCE405221F65C9E7AED7C8614479C01
-:100CD000D6E582404C790AE4ADCB755BAE2B2F375D
-:100CE000E7DAF3ABFED876DBF7E0BFEE6B36C74B47
-:100CF00035E9CE983620375DAE75C2C374EBF2BAD3
-:100D0000223FA27D34F8A15E98C37EE65955705EFD
-:100D1000A1C9CF4ABF43C94FE7EF0C4D0ECB3AA450
-:100D20003F0A95ABCEEF1FD382F83EC5D1ED2C0F15
-:100D30006161FF172AF76F930B6598A5E8CA8FB515
-:100D400008C833D120FD63E252D213A2FB6EE13E0C
-:100D5000D443F0CEF0B74DAC879A7CEE817C68E846
-:100D60007BC2FBC38CE4FF3BF974E496DC1F6C8709
-:100D7000A176772D3BAB7638FF5D8F7BE469C8BEEB
-:100D800042EC33C4FE7479B95745B19D5D91A3DA45
-:100D900022ED55935704FD0E696FF883BE57D3AE0D
-:100DA00078FDC9DFC1FE14229CE4F65888DDE9F223
-:100DB000B996DFD1FDD429E13F6AA7FD9F4C917917
-:100DC00080E767166F33F0744339FCDEC98912EE91
-:100DD000D7FC5B283C45798E42716C53C6891188DB
-:100DE000D727CDFA3A366F33D17F6A4DF79815344D
-:100DF000FF54AE8427911706E1AE30B1107EFDD4CA
-:100E0000488B077C3AA54CC8437C38A5DC7F9BC443
-:100E1000E3CD0EE0F3E3F3EC849F34C9F17A5CD1C7
-:100E2000FDFFA9F9DF2BE0718A38027E381451C228
-:100E3000DF51949862A2E7D47D6953D68A81FD3749
-:100E4000E51A789E57F3DF4407F3BDEFE78AB789C9
-:100E50009A1622A410FDC979BF2D4EA1F60F7E313E
-:100E60006E32E4EB5A39F8FB88D7C9D703DFCAEBF7
-:100E7000FCE0AB3ED3A2A0B874254E167C2EDBCB93
-:100E8000720CB097724D86AE9809D1904FBF775CC7
-:100E900034E28E1E87FA8FED8F7007C9ED2CC529BD
-:100EA000313E089FF06852701C3BBCEB9174AC5310
-:100EB0006EF66439A9FD4CE3D349C837CA773D9C27
-:100EC000CE79F0AE8DE938CF94373D92EE623CDCBE
-:100ED000CDE729A3DCF7F97D37EEDC14947757E5ED
-:100EE000AB4C7FA9F57021E2EDACEB3E7BC84EE345
-:100EF000D27EA1D8A15EF788EE87101F17203FC6CB
-:100F0000F9ADC1CAFE9CD67341FECD137EF81CEC30
-:100F1000F878C6C7A6321A7729D7C8FC5920BC9BD7
-:100F2000E3A95F6C50ECCD2278FC98468C5FB44E00
-:100F30003127C00F2C1F36597560DE30A663F1864D
-:100F4000C95D685FB05AB6CFB2780F9CC03ABF3562
-:100F50003B9B1DEC6F524A260DD07F29D7CCF31650
-:100F60006E5638FFD7BF93F6445C63F03E2F69F2AC
-:100F7000175F5B14C8E5479A5C6E5DFDEE91045AFD
-:100F8000D71EEBBE0CBFF1CEE3A753FDD45E1073AA
-:100F900036137A9E66763F55817D37599CD84776C1
-:100FA00056A21A4FE3A7FC34F731C085AB173D5565
-:100FB000017FBBCDCAE7369DBE958AD3007FFC4634
-:100FC000E38F17836F671EB772DEBEB2717CBC18E9
-:100FD000C24E75B89BE4EFA083CEDE7A2BC317EA2E
-:100FE000EDC241FAB0AF3E81F117EB1D0CC53CA933
-:100FF0005F2BB5F3F1B5D69BFA55B870503E9BBD4B
-:10100000C1261CE4A792E25CA3F2689F69136B9A65
-:10101000366AFB4AA3F9933DC9F9E043F6C6155D6C
-:101020004879CD79F23CF6D6890D4970CACB567F06
-:10103000B8A382FAE7E4958CCBA376EBF6CFB9AEF2
-:10104000F046C7C30BC0EFF2268BDC9FB6EF338FA1
-:10105000A7C73F45EB7BDE34F179BF6EFB873B369C
-:10106000125CB279853958DFBFEB7E93357ABECDFD
-:10107000AEAEC5877FDCAE1E4962FB6922BBCAFCEF
-:10108000E7EDAA6EF51AE6DFFD7925B3C0F7332642
-:101090004F12ECE9CC849B59CF3D8714E6BFEEC7D5
-:1010A000F5F9C5DA7EAB0CBECDD39307FCF84591BC
-:1010B000CDFC3DDCF1693AF2DE8BEDF3FFEEBE0FC5
-:1010C000D2BEFDB4EF76E2AF7FFCD5FDD3CCEE719E
-:1010D0004EDADF3483CC77AFCA5BF30C5ABDA0DBAA
-:1010E0005C122979AEA02EA3C54F8A639E68A2A781
-:1010F000BA53F18765219EDD72D688F31E9D1B3F92
-:101100000ACE23E8E7A3A0B87D2D7ABF0DD6629D55
-:10111000B401BFFBBD3F19843F284EDFD81326FC26
-:1011200041DFBD723EA13633C9A9B76324FB05C8B0
-:10113000CD887A5CC78426E067CD528EBD07296FC3
-:1011400092751CA14E1BD8E7D98EF359F0B3A1FBC1
-:10115000AD7DE53CEB4775FBC39F2BBCFF99678DCD
-:1011600059DFBEFFC3BBCE67417E674D3DD370DE06
-:10117000EA35F764410EB5AF4A7FFE8FF2416FAF9B
-:10118000D8401B213BAF55ACAC2785EA05AE1BF41C
-:101190001E937583DA8E9DEC4FFB3B65FDA6CED08A
-:1011A0005D148F7AC7F20FBBE0CFFA13E4398AD609
-:1011B00077816FD3C76971D0D8973487FCDA4B57E2
-:1011C000F4419EFFCEC07EC7631D5F35FC80C80A18
-:1011D00017C82BCEC19EA97DC1AAE4F5D0F333DE9A
-:1011E0001153E01FDFCAFA6B2DD7FB5E0BB7AB9C28
-:1011F000F7506B90FCAEECC3AB0AD7A07A40B87046
-:10120000058DAB333B7EC4F9F1715520AFAB9B2804
-:10121000ED49BC22EDA966DD617342D07A3B604F97
-:101220004CB7CC1767BDF657B6CBD5335C9DB0CB6A
-:1012300070F842AC9710ED55146D1CC9BF56A32130
-:10124000A2533BF717ABDC5FD7AE8A91989310E9B6
-:101250004DA37D148B2D46E4D3B3846F3AEA36C296
-:10126000D8F3AB9BA87FF66BEAD44D82CF4F0B4BE4
-:10127000F85CE94E5D89FCC8A0687CF565CF098EF5
-:101280006779324E4D57158E637D23C3394F993997
-:10129000AFA614F4EAE3B286C971B40EE759C2DB13
-:1012A000973507F6E9EFCB9A1B3930EECED7C297C8
-:1012B000735C14BEEC3B83BE13962FEBA35F501CF4
-:1012C000819ED45D94F58E42F5EB27909FAF3C4410
-:1012D000FA82FCD090FC9E017E9CF80CB99E27B946
-:1012E000BA107FDCC2E582FD4C1AE185FDD4ED53D6
-:1012F000841175A20E4B13EA48B5A69E38E8F3C6D2
-:10130000F63F9AA1CF756DEF9A1D93305FD69DC8B9
-:1013100020D98FD769F1ABA67DFC7BA8F3D51C93B0
-:1013200051B4C6F82E9FDFAB0EB4F239BD5AF8F9AE
-:101330009C5EDD32585FFA131C5C1709B58FB07CD8
-:10134000C720BB98B94DDAC59DAA580E3F27B43ABD
-:10135000EDCC8478CE4706E6C97CD7A59E7F08F9F8
-:101360004B2045712AB45420CCB30E7991275DE609
-:101370003381DFBD90BD94FD8A37FB76DA5740CBD1
-:1013800077676ED86A5483E899D929EB92813051F6
-:101390007E90E5ED1E0D39085749447E0EDB55164B
-:1013A000FC6AC020EBA8A1FBA8D7EA45C7514FCAE9
-:1013B0001CA07B7662A2F463C2CBFAD36590DF7780
-:1013C00019A87FCAC0FCC5F972FEC07948D6C1AE63
-:1013D000E55776917CCA483E7B48CE80CF533C2E61
-:1013E000233FD342F118F8BF523C06F4D56770FB97
-:1013F0004BF54EC60FD4DFC0F8C17A17E3EDF5C543
-:101400000C5FA92FE1F6E320F5FBF8DFD38DD08741
-:101410002ED8D8A801FC644C083E6AF0F89331CA73
-:10142000607C94C2E3B3F39F6EF464A26E6AD7EC5F
-:10143000DB1189FCEB8C4DD6A1CED8641DAA759426
-:10144000FBA67CEA2F9BB976973C87BAD231AE20B7
-:10145000663E9F5FFBE9FC0A7FB422DF9D07B91C53
-:101460003B969FBA95FDA48DEBA027EFBA2E9AEB81
-:10147000806FD2799C3E9D9B31755D36E1B9110A32
-:10148000EB2FF98BEB4BF47325AD93DF29EF510A6A
-:10149000D5EA32ACBF72A46D2AFCEF172EF7ADA0CF
-:1014A00043E777D1A865A9C887BA4C8EF750C7F52E
-:1014B000FCDE24709ED2EB7DFAB80E57EE5D9837B5
-:1014C0003363DCBA29F03B6464F0732EB368015DCA
-:1014D0002E43B8B296FD96C3083F7097A6C7790E03
-:1014E0009917FBCD0E630CEA3761B9B11E9AD7A5E7
-:1014F000C9F99826E7E39A9CDF469D8CE03BD40E21
-:10150000D84DED809374FE1AFB986F4FE49594B11B
-:10151000FE8ABE24E07A5D7016EC4BFA9B24E8F557
-:10152000664D7F13347FD3955B5225E7F9789D2A6A
-:10153000ADDE765EBB07D1F7ABCF1B982F18CEBDC3
-:101540005E78ACF0F32FCB73A7184DF908E1735F09
-:101550008E673FA45A6FCFFC84EC7CEE54790E105A
-:10156000FB2D725C82230776B256ABB7F67A0D1E5E
-:1015700013EAD331DDE93188BF9A7DE9F8C1BFA90B
-:10158000ECAF6BA6104EF05545EEAF666E77FA30B5
-:10159000CC576C06AE6F37C9FE139AFDD5A468EB25
-:1015A00069FB11565F12E41138F472D262C23745FA
-:1015B000F8974ABFEF4F677F2DFCE973E11715DFFE
-:1015C00007C2497965C1D4C5C691E0876F07F0EAC3
-:1015D000829CC5C61BD1DFFA813DB87F842F49B1FB
-:1015E00003CF96FD235A770C7306E1A6973E40BFC2
-:1015F000D990B3B880F0D916EFB17AE8CD8B52BF4D
-:101600006CFBDA4E836F551D326FCFDBD776E12549
-:10161000C4E5B64827DCFBDEFC64E6F7DA8EDD9B2A
-:10162000A16FBDADF23E6053CB1F77FC92C75970DE
-:101630004D42EBFAB2057D67C591FF5804BA668743
-:10164000FBBE04FEE091194CE7ECE1D2AE1F3E92E6
-:10165000B71876DADBB6EF67B0BFD9D194D0829EE7
-:10166000176C5C87A8DC3FA10076DA1BD9BD00EBC4
-:10167000D73E6F71424F2BF7C7E7A13E70305FD660
-:10168000C32B266E49429C35BCB277D72F71BFFA67
-:10169000BC8DEF85EA62649E57A9364E5BC1F2DBD2
-:1016A000B9EB69D0BDD7C6F7B315A855115EB12BFC
-:1016B0008DEBF8AF7EF3F102C8A150DDBE0BED5FFC
-:1016C0003E6733800F27CCAEE89B6187274C7CDEDA
-:1016D000ACD0F08A93C3253DE13D452CBFD82D49C0
-:1016E00088B395C37F7E1BE89EAD6ED981F38ED8FB
-:1016F0006DE1BB89B37B896F34EF6CB3690AA4DCFD
-:10170000BB37D2087D39AF6C59F014D66F96E3CE53
-:10171000DBB6303F3DCDE305BE47E304FCD679653B
-:10172000EBA0F6B3CDBBB3701E3DF7FC6C3E97EA61
-:10173000FAABDB4BE573964171913D01F9A34AED9C
-:101740006F61F788088AB7151A7AEEE093BD4F8962
-:1017500081F9E75A4C7E33F1A8C222D6596306ECD0
-:10176000A132F19662ECAFD2D0988EBCA5626ACF5E
-:1017700002D8C5599BB026D0B8B7B4B8557960CD5A
-:101780001CE4BFD7A2E7B2E68F2E26C8F875B1DDFC
-:10179000E60DBE970C85EFD70BFBDB6903F83DCB5D
-:1017A0002D9CC3EBEBBD65F655E39C561B23FDC793
-:1017B0000734BE85FCD8375ABC5BB86AF0F8FEFC2B
-:1017C00018FE7EADB9271DF14F5F3F90AFFBB59E70
-:1017D00074F8ABD079B3918EC08FBCA0B01FA93C78
-:1017E000A07CA8129F2AAD1EAF0ABE08B3BE4FE36D
-:1017F0006545CE4B98A6F19DE66E2848E6EF56B6B5
-:10180000D85C369A5715D61385BCA83AB2270AF980
-:101810004EEF2BAA68D2C4151BA7C92745135950F0
-:10182000BDB1C26772D9B2869033F2271AB70C7F66
-:10183000D3F79F2948E1FD94B787F3F784BD671A72
-:10184000F4B47CFBE079D8973DC8FE7ADB77C60517
-:101850009FCB5334BA03CA876C27816F3E4A82DC20
-:101860002B0D621DEE2FCFD11CDC6B122EAC12E7BC
-:101870007BCFCABF4484415FCE5DAC66BBED557A79
-:10188000D8AFBD533087FD52AFA987FDDA1B47EEB5
-:1018900064FFD03BAC6701FCD43B05CB64FFC89E22
-:1018A000050EEADFA7E36304C7FDF78FD4B0FF9806
-:1018B000ADCA771562A7C92EEB411B4ED6F3F9C20C
-:1018C000E4083E7F9F2AD0EA3D03F2E173976E372A
-:1018D000BDC2B1EF00ECB03C82EB3A9447B5BC849A
-:1018E0007C6F7E9C13EF35CA314FEA8139F8BE31E7
-:1018F00036E6D252C8E7F6D1EEA2821CDC6FF6F0D3
-:101900003982B49AE34DEDEF2C7C9E0C98FA76C1A7
-:101910004FA58F76CF2A203AAACDDDEBB389A40B51
-:10192000A69E2E94C867A9D21F89DD52AF7A33775D
-:10193000CA7B1AEDBEF22E8DFF820E318DD00B4583
-:10194000CAF78DF6FD6FC3AFF4768F637F1C6A37DD
-:1019500067DB1F8B827FF813C5714FD079FF4F8BE8
-:1019600076F33DEB3CBC0721B878DD607DE8FFFAFB
-:10197000763EF789CD41EDD0C386C178A81E411FC0
-:10198000FD83FC8E87F9BE4DB3ABAABCEE5AF0E1E5
-:101990000A3E977035087F3D040F192F4A649EB0A8
-:1019A0000DF19FF8513DC67F92CFE9FB4C027E7C42
-:1019B0002DC52FC6DBC2BD38AF18F6517C8A95F114
-:1019C0000971A12AAA9BEB53BD6D16BEEF7DB0E352
-:1019D000D324EC9FF490EB30551D2FC7E1FCBE578C
-:1019E0003B2F501C8CE3F7316D1D713877E8EDD536
-:1019F000065F3AE8A28C88F375BDBD46F5A783FE65
-:101A00002AA53B0BFD7B41378F275C052E781FD520
-:101A10008AB477D1A1B23F0F95DB939ABE925FC88B
-:101A2000E2F71DAFC8FA80EE072A347FF23ADA33C4
-:101A3000A5DDDBF57B259A5A017B1FC23F2414E804
-:101A400079F172AEDF3C5EE090B8369FD795F52510
-:101A5000EEAF7DF57C564A26E669E382FDD0B801FB
-:101A6000BF02FB4F60FB7FD01447FBAADCA138D735
-:101A7000C24F95AE29A2E16299714511D7CD8487F5
-:101A8000CF6DA17485EAD1E402C9A74AC3B0C2D818
-:101A9000A0F5CE914F4F98C27EC60FBFF393D847A3
-:101AA0008B50A7F871A97C377025DE04DB39F6B3BB
-:101AB0005DFA7198CD65C3D57ABC6C79E3FAF821EB
-:101AC000E808A5B3C2DD5814E7B8BA5DA7F79C4D86
-:101AD000A72FCF3422980FF3D6148D20B8CCFACF8D
-:101AE000F241EEF75C87C58FB85A51BA627DF410A7
-:101AF0007A73553CD81E14BF52205F2FDF6F5C8B6A
-:101B0000FE5058ADF84FA25E24C8AE9AD9BEC85E4A
-:101B100082E2C28D05217587F2456391570BF7A2CA
-:101B2000B1883364570B9C439C2FC9418E32F09B84
-:101B3000110FC3507AFE5C20DF25DD5820ED7CF5C7
-:101B40000C57007EF366D5C07978E87A5F15C87CBB
-:101B5000A23B2EF23EFD3D07847DB32AF99668E84C
-:101B60007F07F6961817E9C07D50617EB81C77C8CC
-:101B70006647FD2670E812D777030F45CC93F7062A
-:101B8000116224F577254C6A0A8E23BF2994FB0D38
-:101B9000CF96794B5D86E9EFD7873223AFD487386C
-:101BA0006FC80CE7FB92DEF62F386E053A73ECB87F
-:101BB000D7E8EDA6D321D953DD37FF1D87F8DADB4F
-:101BC000F9677E87D6FBF5A7FC3E6DA3F63EF0F5E0
-:101BD00076ED7D57B72312ED81E28F8B306E930641
-:101BE00007EA04B25EAC43FDFCABD70382CEC1A3CF
-:101BF0000B873E07C7B82382EB048EF8A1EA2AC1FF
-:101C00007582D434592700449D20D524EB04C0515B
-:101C10002700449D00EDA81300479D0038EA04C04A
-:101C2000512700449D00ED5FCE93EF6502A4C4B23E
-:101C30007E19C1FEFDDE66D58BFCFCDE43F21EEA9A
-:101C4000DE4685DF695DA0EF23CE5DF55EE780F6B9
-:101C50005EC7B795EFF5EADA5427445567EA3B8A41
-:101C6000BA4E5DABE25C03FF523F8FBFBFB133E7BB
-:101C7000BD52B4379B9C0607E474310EF5AACACE58
-:101C800066AE3F15C41F32B37C5B14817AE99D16A2
-:101C900079CEAD51A9750ADF87721E5C63E9E6F360
-:101CA00047D51EC55E167C9F7BC3E7EC07D6DAA23C
-:101CB0009A40678DCF662F1BE2FD07DF0B3BC49573
-:101CC000FBE6A57288A88928E2FBE6A5B867262866
-:101CD000D4AF8D7C7F4C07D3E1D047BCABCA805BCF
-:101CE000B74BBB0F794F55D9D9BA3E515C7D0F8D9B
-:101CF000CA00E41F7AFFEC2E8C8C3D1D0E47212676
-:101D0000236F2A7EBC6C5F1B7DAF7F8B85F38E15A6
-:101D1000F9EE65D0A3A32617D7498E1EB2F1F9E8D4
-:101D200093ADE307D549BE70B9AB0BF97E7E34D7CE
-:101D30002D569A148ECBF9C5E3E2F9DDC03113C7F5
-:101D40009F0E57492DC6AD9CE4E0FA54A145DCC76F
-:101D5000EB68EFB408B23D15AE55BC06C21709A733
-:101D600019F6B390D8C6FA628AD880F7540B857CEE
-:101D7000DFA0EBCDCAAD0AE7055C2888C3BDA4E4AB
-:101D8000EFC2CE7FBB84F70B4B2C327F4D34C8FBA8
-:101D9000ECC44DF27DCB4F84DB8C78BB8CE22220EF
-:101DA000C5C9DFF550BB3B7C7492CCCF1DF1587F89
-:101DB000D17113BFF72D8CFF61BA9BE37501BF632F
-:101DC00050FC77AB97AFBBB6FD84BE63386A92FE1A
-:101DD00085F8C8E7A22EE825D767DC0C8FD79733A4
-:101DE0009C3443FAC72BEF12494676D01FDEF70129
-:101DF000CE8B89F1914EF83BDDEEAF7A9F1826A18C
-:101E0000FE3E710C4111F43E71B3CBC1FE2ED17078
-:101E100062AA03FCF84B8413FCD0DF29AE9E51B2BA
-:101E200013727245090FBE8B7B942DC4D7226C446C
-:101E3000419DDBE75251B73EA4D8F95DF4557E725F
-:101E4000EB4378C75397AAD81507EAE15B0AE38802
-:101E5000EEA29464A6BBAE5DD64B994371A8A76B66
-:101E6000F6E072B7158E18689FADD9452F8D977A19
-:101E7000729317FAF61DEAA8CF61BC47D89CCDDA59
-:101E8000790D729F7DDD18AEA7EA7AD3DF12DF04E9
-:101E9000BD79B350C699D2D2774DC803BA72DD4727
-:101EA000B0FF05659F3F14C7FB1BBA8E457E94EFBC
-:101EB0002543EB58BA5FDEA5D5C1E13F8D5A9DD5CC
-:101EC000A8D5598D5A9DD5A8D5598D5A9DD5A8D537
-:101ED000598D5A9DD5A8D5598D5A9DD5C8F5BBE5C4
-:101EE0000CDFA95FC5B0BBDEC3FD41FEFFFD6BF893
-:101EF000FFD03AE8C718175A0715564734C751B2EA
-:101F00006F597F0EA97B160F5FBC81F897DF607653
-:101F1000A249AF83E2FDF2BD11EC0F2E140E59FF62
-:101F2000D4F916C1F5D27E619B02FEE7658C331AA7
-:101F3000A8FF2F9A1CF4FA23EC03FB837D00C23E1A
-:101F40008C6903F6F18C994C385BC67B0FC77B1B01
-:101F5000CB75FD1AF21F842F11F641FEE34288FF74
-:101F6000A083C75DA06369A77CD7A4BFDFCC23F0A3
-:101F7000D59421FC894FFA933161BEBDF8CE98DA31
-:101F8000307E1F7C547B8F7574A37C1757264AF8CC
-:101F9000BB43F89528C863C9F0BE0F9EA6F14B1E3F
-:101FA00089E0BC65FDC8A5D3FE377EE5F342C98F45
-:101FB000DFD6FB2B3F215A0AC2A4FE15984506EE38
-:101FC0006B84218CEDA050DDACE07E74E53D623287
-:101FD000E45C6029D90E3AE3B5FB6D11ABD55B8D9E
-:101FE000DD15BB093F1197E8C4BDD6E8848302EF35
-:101FF0009F0AEB8A33E117FD63DC138A72F07E7966
-:102000008B82F9E19972FFB717873741AF0287C614
-:10201000E740DE732D8E36D4019C45094B70CE9F70
-:102020001BEDC8411DC0D9354AE2F18E36C5895431
-:1020300036614901BF3FB36EF9C48A776B8A88A6BF
-:102040007D5986B973F09D9AE2CFE4B959F4711CB9
-:10205000BBB1489EBF46BC2EFCB8B7EA9B19C9F776
-:102060006722D391837ECA2BBF5F44FA77E407AE21
-:102070009B0013353AE3718BA842AADD36C0E3DA40
-:102080007D5E97C15D0A5814E53172BBC19B0DF8A6
-:1020900096C1F753B4933E17619DA2C7264FCC203B
-:1020A0003CD1E2633FD9E172DD02FA5E9CE12A068F
-:1020B0000CAD9F43B638E7133DB7A23FF41D962EF3
-:1020C000CF254552EFCB8AA4FF98BE56DEC786CAFD
-:1020D000BDACC8A0F9B7BF4F37D15B8AEFE9F48B2D
-:1020E0002D8BB2410FD17B0FF641F42E001411312C
-:1020F0005CEFB8B69E79F87B654552BFC89F557DA9
-:1021000022FD19C374A37718F2C7510F788781DEB7
-:10211000518D7D36FC3B8C673D7D36C4F76757F7A4
-:10212000D9D0FEAC4BBE930E5DBFB148BE9F489F59
-:10213000DEC7F3C7D2B7BA394FEF1B863C2ABDFCC6
-:1021400093F5F2DE2583E3CB582DBE8C7D20A5BD13
-:1021500087F46DEC93D17CBF2D0A62B9BFD22AED12
-:10216000B4F281B2836D04C76F237A83F2AF095E44
-:10217000A27B505E64EC97EF2D09079FF6981887B5
-:10218000CE22BFAA11F2BDE528CD6F206F2B25BF4F
-:1021900050537EE412BF03C07CAC8F3B5BE85FBB57
-:1021A00049E214AE711E5D366F4D179F0FB75D6922
-:1021B000D7CE9BADEB717EA6FC6D507B65D9E12E31
-:1021C000C49BAA3D83DB6B967FCEE758CADF06B57A
-:1021D000DFF3D30FF99D4D5DFBE07692EF5390BF97
-:1021E0002EDFA326DF049CF78ED68439E5BF1FF0CF
-:1021F000AD80BD375547F0FBD99DBFC963BDD1E563
-:102200004DF39BBE9B7EACE5F19E3C91017BF83685
-:10221000D80BFF9436C83F79B8CE372B92FD4E9D30
-:1022200076BEAA2DB3739C4FACB5B2FF2A54C39CA3
-:10223000C06B8DD2CF886255F3533EB6FF13B70DF6
-:10224000E37A1E6F0078CC247E771CB756E27D239C
-:102250002CEC1F0A0D25D5BB091E312C673F908041
-:10226000179724F767E01F54D8AFBC7FA833FB143F
-:1022700079BFEFC8C17957BF6F6AD8E86D3D80F369
-:10228000B2E27D7229EA8A7744F0FD4100F546DA30
-:102290004FC330E9471BE6A7731C088892D215C8C4
-:1022A00043E68571FDB16198E351DC2736544CE477
-:1022B0003CFAE0DF64DCED9B6375228F6A98EC5892
-:1022C00083F72A0D0F38B8FF5545AEE77954F2A7CA
-:1022D000618EDC7F43450C9F7B74393434BA46E20F
-:1022E0007E6AC618F77F426EA3B4FBB986646A277C
-:1022F000F8845232FF27586792A477D20C07CBEDAF
-:10230000E8FC898FEE727038F1E39EA86E56E4A067
-:1023100073F1FF008751D9F610370000000000006C
-:102320000000000000000000050015000000000093
-:00000001FF
diff --git a/firmware/bnx2x-e1h-5.2.7.0.fw.ihex b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
new file mode 100644
index 0000000..280bbcf
--- /dev/null
+++ b/firmware/bnx2x-e1h-5.2.7.0.fw.ihex
@@ -0,0 +1,12847 @@
+:1000000000003BE8000000600000068800003C5053
+:1000100000001968000042E0000000AC00005C50E5
+:1000200000008DE400005D00000000EC0000EAE844
+:100030000000E3000000EBD8000000940001CEE0D7
+:10004000000058E80001CF78000000C400022868D2
+:100050000000F9700002293000000004000322A80B
+:10006000020400480000000F020400540000004594
+:1000700002040058000000840204005C0000000636
+:100080000204007000000004020400780000000078
+:100090000204007C121700000204008022170000F6
+:1000A00002040084321700000604008800000005E6
+:1000B0000204009C12150000020400A0221500009A
+:1000C000020400A432150000060400A80000000489
+:1000D000020400B802100000020400BC001000007E
+:1000E000020400C010100000020400C42010000030
+:1000F000020400C830100000020400CC40100000D0
+:10010000060400D000000003020400DC0010000020
+:10011000020400E012140000020400E422140000B3
+:10012000020400E832140000020400EC4214000053
+:10013000060400F000000003010401240000000098
+:1001400001040128000000000104012C000000004F
+:100150000104013000000000020401D00000890603
+:1001600002040004000000FF02040008000000FF79
+:100170000204000C000000FF02040010000000FF59
+:1001800002040014000000FF02040018000000FF39
+:100190000204001C000000FF02040020000000FF19
+:1001A000020400240000003E0204002800000000B9
+:1001B0000204002C0000003F020400300000003F59
+:1001C000020400340000003F020400380000003F39
+:1001D0000204003C0000003F020400400000003F19
+:1001E000020400440000003F020404CC00000001AF
+:1001F00002042008000002110204200C000002008A
+:10020000020420100000020402042014000002195D
+:100210000204201C0000FFFF020420200000FFFF5A
+:10022000020420240000FFFF020420280000FFFF3A
+:1002300002042038000000200204203C00000000DE
+:100240000204204000000034020420440000003575
+:10025000060420480000001C020420B80000000131
+:10026000060420BC0000005F0204223807FFFFFFE5
+:100270000204223C0000003F0204224007FFFFFF6F
+:10028000020422440000000F010422480000000084
+:100290000104224C00000000010422500000000074
+:1002A0000104225400000000010422580000000054
+:1002B0000104225C00000000010422600000000034
+:1002C0000104226400000000010422680000000014
+:1002D0000104226C000000000104227000000000F4
+:1002E00001042274000000000104227800000000D4
+:1002F0000104227C000000000C042000000003E840
+:100300000A042000000000010B0420000000000A85
+:1003100002050044000000200205004800000032F1
+:10032000020500900215002002050094021500202D
+:1003300002050098000000300205009C0810000033
+:10034000020500A000000033020500A400000030F8
+:10035000020500A800000031020500AC0000000208
+:10036000020500B000000005020500B40000000610
+:10037000020500B800000002020500BC00000002F7
+:10038000020500C000000000020500C400000005D6
+:10039000020500C800000002020500CC00000002B7
+:1003A000020500D000000002020500D40000000198
+:1003B00002050114000000010205011C00000001FB
+:1003C00002050120000000020205020400000001F5
+:1003D0000205020C0000004002050210000000406F
+:1003E0000205021C0000002002050220000000138C
+:1003F0000205022400000020060502400000000A59
+:1004000004050280002000000205005000000007E3
+:100410000205005400000007020500580000000813
+:100420000205005C000000080205006000000001F9
+:100430000605006400000003020500D80000000665
+:100440000205000400000001020500080000000190
+:100450000205000C00000001020500100000000170
+:100460000205001400000001020500180000000150
+:100470000205001C00000001020500200000000130
+:100480000205002400000001020500280000000110
+:100490000205002C000000010205003000000001F0
+:1004A00002050034000000010205003800000001D0
+:1004B0000205003C000000010205004000000001B0
+:1004C000020500E00000000D020500E80000000742
+:1004D000020500F000000007020500F80000000718
+:1004E000020500E40000002D020500EC00000027DA
+:1004F000020500F400000027020500FC00000027B0
+:10050000020500E00000001D020500E800000017E1
+:10051000020500F000000017020500F800000017B7
+:10052000020500E40000003D020500EC0000003779
+:10053000020500F400000037020500FC000000374F
+:10054000020500E00000004D020500E80000004741
+:10055000020500F000000047020500F80000004717
+:10056000020500E40000006D020500EC00000067D9
+:10057000020500F400000067020500FC00000067AF
+:10058000020500E00000005D020500E800000057E1
+:10059000020500F000000057020500F800000057B7
+:1005A000020500E40000007D020500EC0000007779
+:1005B000020500F400000077020500FC000000774F
+:1005C0000406100002000020020600DC000000010A
+:1005D000010600D80000000004060200000302200B
+:1005E000020600DC00000000010600B80000000068
+:1005F000010600C800000000010600BC0000000069
+:10060000010600CC000000000718040000A900004B
+:10061000081807C800070223071C00002C2100004F
+:10062000071C800038930B09071D0000292B192E89
+:10063000081D685052F60225011800000000000055
+:10064000011800040000000001180008000000006C
+:100650000118000C0000000001180010000000004C
+:100660000118001400000000021800200000000122
+:1006700002180024000000020218002800000003F5
+:100680000218002C000000000218003000000004D6
+:1006900002180034000000010218003800000000B9
+:1006A0000218003C00000001021800400000000495
+:1006B0000218004400000000021800480000000179
+:1006C0000218004C00000003021800500000000057
+:1006D0000218005400000001021800580000000435
+:1006E0000218005C00000000021800600000000119
+:1006F00002180064000000030218006800000000F7
+:100700000218006C000000010218007000000004D4
+:1007100002180074000000000218007800000004B5
+:100720000218007C00000003061800800000000290
+:10073000021800A400003FFF021800A8000003FFF9
+:100740000218022400000000021802340000000019
+:100750000218024C00000000021802E4000000FF32
+:100760000618100000000400021B8BC000000001EE
+:10077000021B800000000034021B804000000018B3
+:10078000021B80800000000C021B80C000000020C3
+:100790000C1B83000007A1200A1B83000000013806
+:1007A0000B1B830000001388021B83C0000001F4B0
+:1007B000021B1480000000010A1B148000000000CE
+:1007C000061A1000000003B3041A1ECC0001022711
+:1007D000061AA020000000C8061AA00000000002AF
+:1007E000021A1ED000000000061A1ED800000006E3
+:1007F000061A36E800000004061A36E0000000027F
+:10080000061A500000000002061A500800000004FA
+:10081000061A501800000004061A502800000004B0
+:10082000061A503800000004061A50480000000460
+:10083000061A505800000004061A50680000000410
+:10084000061A507800000002041A404000020228F4
+:10085000061A400000000002061A400800000002CC
+:10086000041A62C00020022A061AD1000000000209
+:10087000061A200000000124061AB000000000281B
+:10088000061AB1400000000C061A330000000014E4
+:10089000061A33A000000068061A81080000000252
+:1008A000061AD1C800000002061AD1D800000020A4
+:1008B000061A249000000124061AB0A000000028A7
+:1008C000061AB1700000000C061A33500000001424
+:1008D000061A354000000068061A81100000000268
+:1008E000061AD1D000000002061AD25800000020DB
+:1008F000021A292000000000061A30000000000241
+:10090000041A30080005024A061A301C00000009CB
+:10091000061A320000000008061A5000000000020B
+:10092000061A508000000012061A40000000000263
+:10093000061AD0C000000002021A2924000000009C
+:10094000061A304000000002041A30480005024F29
+:10095000061A305C00000009061A32200000000868
+:10096000061A501000000002061A50C800000012BB
+:10097000061A400800000002061AD0C80000000253
+:10098000021A292800000000061A30800000000228
+:10099000041A308800050254061A309C0000000931
+:1009A000061A324000000008061A5020000000021B
+:1009B000061A511000000012041A401000020259D9
+:1009C000061AD0D000000002021A292C00000000F4
+:1009D000061A30C000000002041A30C80005025B8D
+:1009E000061A30DC00000009061A32600000000818
+:1009F000061A503000000002061A5158000000127A
+:100A0000041A401800020260061AD0D80000000242
+:100A1000021A293000000000061A3100000000020E
+:100A2000041A310800050262061A311C0000000990
+:100A3000061A328000000008061A5040000000022A
+:100A4000061A51A000000012041A4020000202679A
+:100A5000061AD0E000000002021A2934000000004B
+:100A6000061A314000000002041A314800050269EC
+:100A7000061A315C00000009061A32A000000008C6
+:100A8000061A505000000002061A51E80000001239
+:100A9000041A40280002026E061AD0E80000000284
+:100AA000021A293800000000061A318000000002F6
+:100AB000041A318800050270061A319C00000009F2
+:100AC000061A32C000000008061A5060000000023A
+:100AD000061A523000000012041A4030000202755B
+:100AE000061AD0F000000002021A293C00000000A3
+:100AF000061A31C000000002041A31C8000502774E
+:100B0000061A31DC00000009061A32E00000000875
+:100B1000061A507000000002061A527800000012F7
+:100B2000041A40380002027C061AD0F800000002C5
+:100B30000200A294071D29110200A29800000000E3
+:100B40000200A29C009C04240200A2A0000000005D
+:100B50000200A2A4000002090200A270000000002E
+:100B60000200A274000000000200A2700000000059
+:100B70000200A274000000000200A2700000000049
+:100B80000200A274000000000200A2700000000039
+:100B90000200A27400000000020100B40000000185
+:100BA000020100B800000001020100DC00000001A9
+:100BB0000201010000000001020101040000000127
+:100BC0000201007C003000000201008400000028C7
+:100BD0000201008C0000000002010130000000044E
+:100BE0000201025C00000001020103280000000075
+:100BF0000201607000000007020160800000000137
+:100C00000201055400000030020100C40000000190
+:100C1000020100CC00000001020100F80000000108
+:100C2000020100F00000000102010080003000001D
+:100C3000020100880000002802010090000000006E
+:100C40000201013400000004020102DC0000000186
+:100C50000201032C00000000020160740000000784
+:100C60000201608400000001020105640000003000
+:100C7000020100C800000001020100D000000001D4
+:100C8000020100FC00000001020100F4000000016C
+:100C9000020C100000000020020C200800000211CD
+:100CA000020C200C00000200020C201000000204C4
+:100CB000020C201C0000FFFF020C20200000FFFFA0
+:100CC000020C20240000FFFF020C20280000FFFF80
+:100CD000060C203800000002020C20400000003406
+:100CE000020C204400000035020C204800000020C7
+:100CF000020C204C00000021020C205000000022B9
+:100D0000020C205400000023020C20580000002494
+:100D1000020C205C00000025020C20600000002670
+:100D2000020C206400000027020C2068000000284C
+:100D3000020C206C00000029020C20700000002A28
+:100D4000020C20740000002B060C207800000056D6
+:100D5000020C21D000000001020C21D4000000018F
+:100D6000020C21D800000001020C21DC000000016F
+:100D7000020C21E000000001020C21E4000000014F
+:100D8000020C21E800000001020C21EC000000012F
+:100D9000020C21F000000001020C21F4000000010F
+:100DA000060C21F800000010020C223807FFFFFF9C
+:100DB000020C223C0000003F020C224007FFFFFF14
+:100DC000020C22440000000F010C22480000000029
+:100DD000010C224C00000000010C22500000000019
+:100DE000010C225400000000010C225800000000F9
+:100DF000010C225C00000000010C226000000000D9
+:100E0000010C226400000000010C226800000000B8
+:100E1000010C226C00000000010C22700000000098
+:100E2000010C227400000000010C22780000000078
+:100E3000010C227C000000000C0C2000000003E8E4
+:100E40000A0C2000000000010B0C20000000000A2A
+:100E5000020C400800000411020C400C00000400C9
+:100E6000020C401000000404020C40140000042195
+:100E7000020C401C0000FFFF020C40200000FFFF9E
+:100E8000020C40240000FFFF020C40280000FFFF7E
+:100E9000020C403800000046020C403C00000005F7
+:100EA000060C404000000002020C40480000000A0E
+:100EB000020C404C000000F0060C40500000001FE7
+:100EC000020C40CC00000001060C40D00000003AAB
+:100ED000020C41B800000001060C41BC00000003F8
+:100EE000020C41C800000001020C41CC00000001CE
+:100EF000060C41D00000001A020C423807FFFFFF29
+:100F0000020C423C0000003F020C424007FFFFFF82
+:100F1000020C42440000000F010C42480000000097
+:100F2000010C424C00000000010C42500000000087
+:100F3000010C425400000000010C42580000000067
+:100F4000010C425C00000000010C42600000000047
+:100F5000010C426400000000010C42680000000027
+:100F6000010C426C00000000010C42700000000007
+:100F7000010C427400000000010C427800000000E7
+:100F8000010C427C00000000010C428000000000C7
+:100F90000C0C4000000003E80A0C400000000001B7
+:100FA0000B0C40000000000A020D0044000000325B
+:100FB000020D008C02150020020D00900215002089
+:100FC000020D009408100000020D0098000000338C
+:100FD000020D009C00000002020D00A000000000B5
+:100FE000020D00A400000005020D00A8000000058D
+:100FF000060D00AC00000002020D00B4000000026B
+:10100000020D00B800000003020D00BC0000000249
+:10101000020D00C000000001020D00C80000000227
+:10102000020D00CC00000002020D010800000001CA
+:10103000020D015C00000001020D016400000001CE
+:10104000020D016800000002020D02040000000110
+:10105000020D020C00000020020D021000000040F2
+:10106000020D021400000040020D022000000003E7
+:10107000020D022400000018060D0280000000127C
+:10108000040D03000024027E020D004C000000014C
+:10109000020D005000000002020D00540000000884
+:1010A000020D005800000008060D005C000000045E
+:1010B000020D00C400000004020D00040000000145
+:1010C000020D000800000001020D000C00000001EC
+:1010D000020D001000000001020D001400000001CC
+:1010E000020D001800000001020D001C00000001AC
+:1010F000020D002000000001020D0024000000018C
+:10110000020D002800000001020D002C000000016B
+:10111000020D003000000001020D0034000000014B
+:10112000020D003800000001020D003C000000012B
+:10113000020D011400000009020D011C0000000A4C
+:10114000020D012400000007020D012C0000000721
+:10115000020D01340000000C020D013C0000000BE8
+:10116000020D014400000007020D011800000029D3
+:10117000020D01200000002A020D012800000027B6
+:10118000020D013000000027020D01380000002C84
+:10119000020D01400000002B020D01480000002755
+:1011A000020D011400000019020D011C0000001ABC
+:1011B000020D012400000017020D012C0000001791
+:1011C000020D01340000001C020D013C0000001B58
+:1011D000020D014400000017020D01180000003943
+:1011E000020D01200000003A020D01280000003726
+:1011F000020D013000000037020D01380000003CF4
+:10120000020D01400000003B020D014800000037C4
+:10121000020D011400000049020D011C0000004AEB
+:10122000020D012400000047020D012C00000047C0
+:10123000020D01340000004C020D013C0000004B87
+:10124000020D014400000047020D01180000006972
+:10125000020D01200000006A020D01280000006755
+:10126000020D013000000067020D01380000006C23
+:10127000020D01400000006B020D014800000067F4
+:10128000020D011400000059020D011C0000005A5B
+:10129000020D012400000057020D012C0000005730
+:1012A000020D01340000005C020D013C0000005BF7
+:1012B000020D014400000057020D011800000079E2
+:1012C000020D01200000007A020D012800000077C5
+:1012D000020D013000000077020D01380000007C93
+:1012E000020D01400000007B020D01480000007764
+:1012F000020E004C00000032020E00940215002085
+:10130000020E009802150020020E009C0000003022
+:10131000020E00A008100000020E00A4000000331E
+:10132000020E00A800000030020E00AC00000031E8
+:10133000020E00B000000002020E00B40000000423
+:10134000020E00B800000000020E00BC0000000207
+:10135000020E00C000000002020E00C400000000E7
+:10136000020E00C800000002020E00CC00000007C0
+:10137000020E00D000000002020E00D400000002A5
+:10138000020E00D800000001020E00E4000000017F
+:10139000020E014400000001020E014C0000000199
+:1013A000020E015000000002020E020400000001C3
+:1013B000020E020C00000040020E0210000000406D
+:1013C000020E021C00000004020E02200000002099
+:1013D000020E02240000000E020E02280000001B74
+:1013E000060E030000000012040E0280001B02A281
+:1013F000020E00540000000C020E0058000000090C
+:10140000020E005C0000000F020E006000000010E1
+:10141000020E00640000000B060E006800000003CE
+:10142000020E00DC00000003020E000400000001B8
+:10143000020E000800000001020E000C0000000176
+:10144000020E001000000001020E00140000000156
+:10145000020E001800000001020E001C0000000136
+:10146000020E002000000001020E00240000000116
+:10147000020E002800000001020E002C00000001F6
+:10148000020E003000000001020E003400000001D6
+:10149000020E003800000001020E003C00000001B6
+:1014A000020E004000000001020E00440000000196
+:1014B000020E01100000000F020E01180000000EC5
+:1014C000020E012000000000020E012800000000B2
+:1014D000020E01140000002F020E011C0000002E5D
+:1014E000020E012400000000020E012C000000008A
+:1014F000020E01100000001F020E01180000001E65
+:10150000020E012000000000020E01280000000071
+:10151000020E01140000003F020E011C0000003EFC
+:10152000020E012400000000020E012C0000000049
+:10153000020E01100000004F020E01180000004EC4
+:10154000020E012000000000020E01280000000031
+:10155000020E01140000006F020E011C0000006E5C
+:10156000020E012400000000020E012C0000000009
+:10157000020E01100000005F020E01180000005E64
+:10158000020E012000000000020E012800000000F1
+:10159000020E01140000007F020E011C0000007EFC
+:1015A000020E012400000000020E012C00000000C9
+:1015B0000730040000E80000083007D8000502BD2D
+:1015C000073400002EAA000007348000312D0BAB39
+:1015D00007350000358217F707358000396D25582B
+:1015E00007360000142D33B40836321039BE02BF5E
+:1015F0000130000000000000013000040000000085
+:1016000001300008000000000130000C0000000064
+:101610000130001000000000013000140000000044
+:10162000023000200000000102300024000000020F
+:1016300002300028000000030230002C00000000EF
+:1016400002300030000000040230003400000001CD
+:1016500002300038000000000230003C00000001B1
+:10166000023000400000000402300044000000008E
+:1016700002300048000000010230004C000000036E
+:101680000230005000000000023000540000000151
+:1016900002300058000000040230005C000000002E
+:1016A000023000600000000102300064000000030E
+:1016B00002300068000000000230006C00000001F1
+:1016C00002300070000000040230007400000000CE
+:1016D00002300078000000040230007C00000003AB
+:1016E0000630008000000002023000A400003FFF2E
+:1016F000023000A8000003FF0230022400000000B6
+:1017000002300234000000000230024C00000000F1
+:10171000023002E40000FFFF063020000000080055
+:1017200002338BC000000001023380000000001A69
+:10173000023380400000004E023380800000001021
+:10174000023380C0000000200C3383000007A1207A
+:101750000A338300000001380B3383000000138834
+:10176000023383C0000001F40C3383801DCD65007B
+:101770000A3383800004C4B40B338380004C4B4095
+:101780000A331480000000000233148000000001BE
+:10179000063220000000010206328020000000C84E
+:1017A000063280000000000206323DA8000000045E
+:1017B00006323D800000000904323DA4000102C150
+:1017C00006323D00000000200632500000000400F8
+:1017D0000632400000000004063240D00000000243
+:1017E00006326B680000000204326B70000202C215
+:1017F00006326B1000000002043274C0000202C402
+:101800000632DA40000000020632E0000000080064
+:10181000023308000100000004330C00001002C66F
+:10182000023308000000000004330C40001002D610
+:1018300006322450000000B406322AD00000000214
+:1018400006321000000001A002323DB80000000086
+:101850000632500000000020063251000000002037
+:101860000632520000000020063253000000002023
+:10187000063254000000002006325500000000200F
+:1018800006325600000000200632570000000020FB
+:1018900006325800000000200632590000000020E7
+:1018A00006325A000000002006325B0000000020D3
+:1018B00006325C000000002006325D0000000020BF
+:1018C00006325E000000002006325F0000000020AB
+:1018D00006326B780000005206326E080000000CE1
+:1018E0000632DA880000000206322720000000B429
+:1018F00006322AD80000000206321680000001A03D
+:1019000002323DBC00000000063250800000002082
+:101910000632518000000020063252800000002074
+:101920000632538000000020063254800000002060
+:10193000063255800000002006325680000000204C
+:101940000632578000000020063258800000002038
+:10195000063259800000002006325A800000002024
+:1019600006325B800000002006325C800000002010
+:1019700006325D800000002006325E8000000020FC
+:1019800006325F800000002006326CC0000000526A
+:1019900006326E380000000C0632DA9000000002B9
+:1019A00002322A300000000006324010000000021F
+:1019B0000632D0000000000602322A340000000087
+:1019C00006324020000000020632D0180000000657
+:1019D00002322A38000000000632403000000002C7
+:1019E0000632D0300000000602322A3C000000001F
+:1019F00006324040000000020632D04800000006D7
+:101A000002322A400000000006324050000000026E
+:101A10000632D0600000000602322A4400000000B6
+:101A200006324060000000020632D0780000000656
+:101A300002322A4800000000063240700000000216
+:101A40000632D0900000000602322A4C000000004E
+:101A500006324080000000020632D0A800000006D6
+:101A6000072004000093000008200780001002E611
+:101A7000072400002ADE0000072480002E050AB893
+:101A80000824E4A061D202E8012000000000000068
+:101A900001200004000000000120000800000000F8
+:101AA0000120000C000000000120001000000000D8
+:101AB00001200014000000000220002000000001AE
+:101AC0000220002400000002022000280000000381
+:101AD0000220002C00000000022000300000000462
+:101AE0000220003400000001022000380000000045
+:101AF0000220003C00000001022000400000000421
+:101B00000220004400000000022000480000000104
+:101B10000220004C000000030220005000000000E2
+:101B200002200054000000010220005800000004C0
+:101B30000220005C000000000220006000000001A4
+:101B40000220006400000003022000680000000082
+:101B50000220006C00000001022000700000000460
+:101B60000220007400000000022000780000000441
+:101B70000220007C0000000306200080000000021C
+:101B8000022000A400003FFF022000A8000003FF85
+:101B900002200224000000000220023400000000A5
+:101BA0000220024C00000000022002E40000FFFFBF
+:101BB000062020000000080002238BC00000000166
+:101BC0000223800000000010022380400000001269
+:101BD0000223808000000030022380C00000000E3D
+:101BE000022383C0000001F40223148000000001DE
+:101BF0000A231480000000000622100000000042AA
+:101C000006227020000000C80622700000000002BA
+:101C1000022211E80000000006223000000000C08F
+:101C2000062240700000008006225280000000045E
+:101C30000622670000000100062290000000040058
+:101C400004226B08002002EA02230800013FFFFF84
+:101C500004230C000010030A022308000000000007
+:101C600004230C400010031A06228100000000A08B
+:101C7000062286000000004006228C000000003C86
+:101C80000622B0000000020006228800000000804A
+:101C900006228DE00000003C0622404000000006C5
+:101CA00006228380000000A006228700000000407A
+:101CB00006228CF00000003C0622B8000000020062
+:101CC00006228A000000008006228ED00000003C20
+:101CD000062240580000000606228000000000088E
+:101CE000022211480000000006223300000000021A
+:101CF000062260400000003006228020000000081C
+:101D00000222114C000000000622330800000002ED
+:101D1000062261000000003006228040000000081A
+:101D200002221150000000000622331000000002C1
+:101D3000062261C00000003006228060000000081A
+:101D40000222115400000000062233180000000295
+:101D50000622628000000030062280800000000819
+:101D60000222115800000000062233200000000269
+:101D70000622634000000030062280A00000000818
+:101D80000222115C0000000006223328000000023D
+:101D90000622640000000030062280C00000000817
+:101DA0000222116000000000062233300000000211
+:101DB000062264C000000030062280E00000000817
+:101DC00002221164000000000622333800000002E5
+:101DD0000622658000000030021610000000002876
+:101DE00002170008000000020217002C0000000388
+:101DF0000217003C00000004021700440000000825
+:101E000002170048000000020217004C000000907A
+:101E1000021700500000009002170054008000904C
+:101E20000217005808140000021700600000008A22
+:101E300002170064000000800217006800000081A3
+:101E40000217006C000000800217007000000006FE
+:101E500002170078000007D00217007C0000076C12
+:101E600002170038007C1004021700040000000F65
+:101E70000616402400000002021640700000001CFC
+:101E80000216420800000001021642100000000184
+:101E90000216422000000001021642280000000144
+:101EA0000216423000000001021642380000000114
+:101EB00002164260000000020C16401C0003D09085
+:101EC0000A16401C0000009C0B16401C000009C4B0
+:101ED0000216403000000008021640340000000CDA
+:101EE0000216403800000010021640440000002096
+:101EF0000216400000000001021640D80000000158
+:101F000002164008000000010216400C000000010B
+:101F100002164010000000010216424000000000BE
+:101F2000021642480000000006164270000000023F
+:101F30000216425000000000021642580000000045
+:101F40000616428000000002021660080000042409
+:101F50000216600C00000410021660100000041449
+:101F60000216601C0000FFFF021660200000FFFF49
+:101F7000021660240000FFFF021660280000FFFF29
+:101F800002166038000000200216603C00000020AD
+:101F90000216604000000034021660440000003564
+:101FA00002166048000000230216604C0000002466
+:101FB0000216605000000025021660540000002642
+:101FC00002166058000000270216605C000000291D
+:101FD000021660600000002A021660640000002BF8
+:101FE000021660680000002C0216606C0000002DD4
+:101FF0000616607000000052021661B80000000171
+:10200000061661BC0000001F0216623807FFFFFFC2
+:102010000216623C0000003F0216624007FFFFFF0D
+:10202000021662440000000F011662480000000022
+:102030000116624C00000000011662500000000012
+:1020400001166254000000000116625800000000F2
+:102050000116625C000000000116626000000000D2
+:1020600001166264000000000116626800000000B2
+:102070000116626C00000000011662700000000092
+:102080000116627400000000011662780000000072
+:102090000116627C000000000C166000000003E8DE
+:1020A0000A166000000000010B1660000000000A24
+:1020B0000216804000000006021680440000000561
+:1020C000021680480000000A0216804C000000053D
+:1020D0000216805400000002021680CC00000004AA
+:1020E000021680D000000004021680D40000000414
+:1020F000021680D800000004021680DC00000004F4
+:10210000021680E000000004021680E400000004D3
+:10211000021680E800000004021688040000000493
+:10212000021680300000007C021680340000003D62
+:10213000021680380000003F0216803C0000009C20
+:10214000021680F000000007061680F4000000056B
+:102150000216880C0101010102168108000000002E
+:102160000216810C00000004021681100000000419
+:1021700002168114000000020216881008012004D3
+:1021800002168118000000050216811C00000005DF
+:1021900002168120000000050216812400000005BF
+:1021A0000216882C20081001021681280000000861
+:1021B0000216812C00000006021681300000000784
+:1021C000021681340000000002168830010101204F
+:1021D000061681380000000402168834010101014E
+:1021E00002168148000000000216814C0000000425
+:1021F0000216815000000004021681540000000203
+:1022000002168838080120040216815800000005D3
+:102210000216815C000000050216816000000005C6
+:1022200002168164000000050216883C2008100197
+:1022300002168168000000080216816C000000068A
+:102240000216817000000007021681740000000170
+:102250000216884001010120021681780000000169
+:102260000216817C0000000102168180000000013E
+:102270000216818400000001021688440101010158
+:1022800002168188000000010216818C0000000403
+:1022900002168190000000040216819400000002E2
+:1022A00002168848080120040216819800000005E3
+:1022B0000216819C00000005021681A000000005A6
+:1022C000021681A4000000050216881420081001DF
+:1022D000021681A800000008021681AC000000066A
+:1022E000021681B000000007021681B40000000150
+:1022F0000216881801010120021681B800000001B1
+:10230000021681BC00000001021681C0000000011D
+:10231000021681C4000000010216881C010101019F
+:10232000021681C800000001021681CC00000004E2
+:10233000021681D000000004021681D400000002C1
+:102340000216882008012004021681D8000000052A
+:10235000021681DC00000005021681E00000000585
+:10236000021681E4000000050216882420081001EE
+:10237000021681E800000008021681EC0000000649
+:10238000021681F0000000070216E40C00000000B5
+:1023900002168828010101200616E410000000043E
+:1023A0000216E000010101010216E4200000000015
+:1023B0000216E424000000040216E42800000004D1
+:1023C0000216E42C000000020216E00408012004BA
+:1023D0000216E430000000050216E4340000000597
+:1023E0000216E438000000050216E43C0000000577
+:1023F0000216E008200810010216E4400000000860
+:102400000216E444000000060216E448000000073B
+:102410000216E44C000000000216E00C010101204D
+:102420000616E450000000040216E010010101014C
+:102430000216E460000000000216E46400000004DC
+:102440000216E468000000040216E46C00000002BA
+:102450000216E014080120040216E47000000005D2
+:102460000216E474000000050216E478000000057E
+:102470000216E47C000000050216E0182008100196
+:102480000216E480000000080216E4840000000642
+:102490000216E488000000070216E48C0000000128
+:1024A0000216E01C010101200216E4900000000168
+:1024B0000216E494000000010216E49800000001F6
+:1024C0000216E49C000000010216E0200101010157
+:1024D0000216E4A0000000010216E4A400000004BB
+:1024E0000216E4A8000000040216E4AC000000029A
+:1024F0000216E024080120040216E4B000000005E2
+:102500000216E4B4000000050216E4B8000000055D
+:102510000216E4BC000000050216E02820081001A5
+:102520000216E4C0000000080216E4C40000000621
+:102530000216E4C8000000070216E4CC0000000107
+:102540000216E02C010101200216E4D00000000177
+:102550000216E4D4000000010216E4D800000001D5
+:102560000216E4DC000000010216E0300101010166
+:102570000216E4E0000000010216E4E4000000049A
+:102580000216E4E8000000040216E4EC0000000279
+:102590000216E034080120040216E4F000000005F1
+:1025A0000216E4F4000000050216E4F8000000053D
+:1025B0000216E4FC000000050216E03820081001B5
+:1025C0000216E500000000080216E50400000006FF
+:1025D0000216E508000000070216E03C0101012098
+:1025E00002168240003F003F0216824400000000B5
+:1025F0000216E524003F003F0216E5280000000017
+:1026000002168248000000000216824C003F003F84
+:102610000216E52C000000000216E530003F003FE6
+:1026200002168250010001000216825401000100CE
+:102630000216E534010001000216E5380100010030
+:1026400006168258000000020216E53C0000000059
+:102650000216E540000000000216826000C000C0C3
+:102660000216826400C000C00216E54400C000C02B
+:102670000216E54800C000C0021682681E001E0057
+:102680000216826C1E001E000216E54C1E001E0083
+:102690000216E5501E001E00021682704000400027
+:1026A00002168274400040000216E55440004000CB
+:1026B0000216E55840004000021682788000800033
+:1026C0000216827C800080000216E55C800080009B
+:1026D0000216E56080008000021682802000200043
+:1026E00002168284200020000216E56420002000EB
+:1026F0000216E5682000200006168288000000020D
+:102700000216E56C000000000216E57000000000F3
+:102710000216829000000000021682940000000061
+:102720000216E574000000000216E57800000000C3
+:1027300002168298000000000216829C0000000031
+:102740000216E57C000000000216E5800000000093
+:10275000021682A000000000021682A40000000100
+:10276000061682A80000000A021681F400000C0878
+:10277000021681F800000040021681FC00000100F2
+:1027800002168200000000200216820400000017DA
+:1027900002168208000000800216820C000002006F
+:1027A00002168210000000000216821801FF01FFCD
+:1027B0000216821401FF01FF0216E51001FF01FF5E
+:1027C0000216E50C01FF01FF0216823C0000001317
+:1027D000021680900000013F021680600000014058
+:1027E00002168064000001400616806800000002A6
+:1027F00002168070000000C00616807400000007FA
+:102800000216809C00000048021680A000000048CC
+:10281000061680A400000002021680AC00000048EA
+:10282000061680B000000007021682380000800003
+:1028300002168234000025E40216809400007FFF17
+:1028400002168220000F000F0216821C000F000FDC
+:102850000216E518000F000F0216E514000F000F16
+:10286000021682280000000002168224FFFFFFFFEC
+:102870000216E520000000000216E51CFFFFFFFF26
+:102880000216E6BC000000000216E6C000000002CE
+:102890000216E6C4000000010216E6C800000003AC
+:1028A0000216E6CC000000040216E6D00000000686
+:1028B0000216E6D4000000050216E6D80000000764
+:1028C000021680EC000000FF02140000000000016E
+:1028D0000214000C0000000102140040000000017E
+:1028E0000214004400007FFF0214000C00000000EE
+:1028F00002140000000000000214006C0000000040
+:102900000214000400000001021400300000000165
+:1029100002140004000000000214005C000000002B
+:10292000021400080000000102140034000000013D
+:102930000214000800000000021400600000000003
+:102940000202005800000032020200A0031500201D
+:10295000020200A403150020020200A801000030BA
+:10296000020200AC08100000020200B000000033B8
+:10297000020200B400000030020200B80000003182
+:10298000020200BC00000003020200C000000006BA
+:10299000020200C400000003020200C8000000039D
+:1029A000020200CC00000002020200D00000000081
+:1029B000020200D400000002020200DC000000005D
+:1029C000020200E000000006020200E40000000431
+:1029D000020200E800000002020200EC0000000217
+:1029E000020200F000000001020200FC00000006EC
+:1029F0000202012000000000020201340000000277
+:102A0000020201B0000000010202020C00000001FD
+:102A1000020202140000000102020218000000027B
+:102A200002020404000000010202040C0000004045
+:102A300002020410000000400202041C0000000416
+:102A40000202042000000020020204240000000210
+:102A50000202042800000020060205000000001207
+:102A600004020480001F032A020200600000000F1D
+:102A70000202006400000007020200680000000B70
+:102A80000202006C0000000E020200700000000E46
+:102A90000602007400000003020200F400000004BB
+:102AA0000202000400000001020200080000000110
+:102AB0000202000C000000010202001000000001F0
+:102AC00002020014000000010202001800000001D0
+:102AD0000202001C000000010202002000000001B0
+:102AE0000202002400000001020200280000000190
+:102AF0000202002C00000001020200300000000170
+:102B0000020200340000000102020038000000014F
+:102B10000202003C0000000102020040000000012F
+:102B2000020200440000000102020048000000010F
+:102B30000202004C000000010202005000000001EF
+:102B400002020108000000C8020201180000000291
+:102B5000020201C400000000020201CC00000000DB
+:102B6000020201D400000002020201DC00000002A7
+:102B7000020201E4000000FF020201EC000000FF7D
+:102B800002020100000000000202010C000000C867
+:102B90000202011C00000002020201C80000000045
+:102BA000020201D000000000020201D80000000271
+:102BB000020201E000000002020201E8000000FF42
+:102BC000020201F0000000FF020201040000000008
+:102BD00002020108000000C8020201180000000201
+:102BE000020201C400000000020201CC000000004B
+:102BF000020201D400000002020201DC0000000217
+:102C0000020201E4000000FF020201EC000000FFEC
+:102C100002020100000000000202010C000000C8D6
+:102C20000202011C00000002020201C800000000B4
+:102C3000020201D000000000020201D800000002E0
+:102C4000020201E000000002020201E8000000FFB1
+:102C5000020201F0000000FF020201040000000077
+:102C600002020108000000C8020201180000000270
+:102C7000020201C400000000020201CC00000000BA
+:102C8000020201D400000002020201DC0000000286
+:102C9000020201E4000000FF020201EC000000FF5C
+:102CA00002020100000000000202010C000000C846
+:102CB0000202011C00000002020201C80000000024
+:102CC000020201D000000000020201D80000000250
+:102CD000020201E000000002020201E8000000FF21
+:102CE000020201F0000000FF0202010400000000E7
+:102CF00002020108000000C80202011800000002E0
+:102D0000020201C400000000020201CC0000000029
+:102D1000020201D400000002020201DC00000002F5
+:102D2000020201E4000000FF020201EC000000FFCB
+:102D300002020100000000000202010C000000C8B5
+:102D40000202011C00000002020201C80000000093
+:102D5000020201D000000000020201D800000002BF
+:102D6000020201E000000002020201E8000000FF90
+:102D7000020201F0000000FF020201040000000056
+:102D80000728040000C00000082807A8000B03491A
+:102D9000072C000032FC0000072C800035790CC0A5
+:102DA000072D00003AC11A1F072D800039EF28D0E7
+:102DB000072E00001C3E374C082E3710391E034BDF
+:102DC00001280000000000000128000400000000AD
+:102DD00001280008000000000128000C000000008D
+:102DE000012800100000000001280014000000006D
+:102DF0000228002000000001022800240000000238
+:102E000002280028000000030228002C0000000017
+:102E100002280030000000040228003400000001F5
+:102E200002280038000000000228003C00000001D9
+:102E300002280040000000040228004400000000B6
+:102E400002280048000000010228004C0000000396
+:102E50000228005000000000022800540000000179
+:102E600002280058000000040228005C0000000056
+:102E70000228006000000001022800640000000336
+:102E800002280068000000000228006C0000000119
+:102E900002280070000000040228007400000000F6
+:102EA00002280078000000040228007C00000003D3
+:102EB0000628008000000002022800A400003FFF56
+:102EC000022800A8000003FF0228022400000000DE
+:102ED00002280234000000000228024C000000001A
+:102EE000022802E40000FFFF06282000000008007E
+:102EF000022B8BC000000001022B800000000000AC
+:102F0000022B804000000018022B80800000000C83
+:102F1000022B80C0000000660C2B83000007A1205C
+:102F20000A2B8300000001380B2B8300000013885C
+:102F3000022B83C0000001F40C2B8340000001F43D
+:102F40000A2B8340000000000B2B8340000000058B
+:102F50000A2B83800004C4B40C2B83801DCD650034
+:102F60000A2B1480000000000B2B8380004C4B4088
+:102F7000022B148000000001062A29C8000000046A
+:102F8000042A29D80002034D062A208000000048A8
+:102F9000062A9020000000C8062A900000000002C7
+:102FA000062A21A800000086062A20000000002032
+:102FB000022A23C800000000042A23D00002034F85
+:102FC000042A249800040351022A2C500000000017
+:102FD000022A2C1000000000042A2C0800020355CD
+:102FE000042A300000020357062A300800000100BE
+:102FF000062A404000000010042A40000010035937
+:10300000062A6AC000000002062A6B0000000004C5
+:10301000042A840800020369022B08000000000053
+:10302000042B0C000010036B022B080001000000B1
+:10303000042B0C400008037B022B08000200000058
+:10304000042B0C6000080383062AC000000000D88F
+:10305000062A24A800000014062A254800000022A1
+:10306000042A25D00002038B062A266800000022CD
+:10307000042A26F00002038D062A27880000002279
+:10308000042A28100002038F062A28A80000002224
+:10309000042A293000020391062AA000000000281B
+:1030A000062AA1400000000C042A29E00002039334
+:1030B000062A502000000002062A503000000002BC
+:1030C000062A500000000002062A501000000002EC
+:1030D000022A520800000001042A6AC8000203956F
+:1030E000062A6B1000000042062A6D200000000432
+:1030F000062ABCD000000002062AC360000000D8E7
+:10310000062A24F800000014062A25D80000002210
+:10311000042A266000020397062A26F800000022EF
+:10312000042A278000020399062A2818000000229A
+:10313000042A28A00002039B062A29380000002246
+:10314000042A29C00002039D062AA0A0000000282E
+:10315000062AA1700000000C042A29E80002039F3F
+:10316000062A502800000002062A503800000002FB
+:10317000062A500800000002062A5018000000022B
+:10318000022A520C00000001042A6AD0000203A1A6
+:10319000062A6C1800000042062A6D300000000468
+:1031A000062ABCD800000002022AC6C000000000A7
+:1031B000042A29F0001003A3062A50480000000E3C
+:1031C000062AB00000000006022AC6C40000000063
+:1031D000042A2A30001003B3062A50800000000E93
+:1031E000062AB01800000006022AC6C80000000027
+:1031F000042A2A70001003C3062A50B80000000EEB
+:10320000062AB03000000006022AC6CC00000000EA
+:10321000042A2AB0001003D3062A50F00000000E42
+:10322000062AB04800000006022AC6D000000000AE
+:10323000042A2AF0001003E3062A51280000000E99
+:10324000062AB06000000006022AC6D40000000072
+:10325000042A2B30001003F3062A51600000000EF0
+:10326000062AB07800000006022AC6D80000000036
+:10327000042A2B7000100403062A51980000000E47
+:10328000062AB09000000006022AC6DC00000000FA
+:10329000042A2BB000100413062A51D00000000E9F
+:1032A000062AB0A800000006021010080000000165
+:1032B0000210105000000001021010000003D000A6
+:1032C000021010040000003D091018000200042341
+:1032D0000910110000280623061011A00000001894
+:1032E00006102400000000E00210201C0000000076
+:1032F0000210202000000001021020C00000000287
+:10330000021020040000000102102008000000014B
+:1033100009103C000005064B091038000005065056
+:10332000091038200005065506104C000000010069
+:1033300002104028000000100210404400003FFF2F
+:103340000210405800280000021040840084924A75
+:1033500002104058000000000210800000001080A1
+:10336000021080AC00000000021080380000001045
+:103370000210810000000000061081200000000201
+:1033800002108008000002B502108010000000004A
+:10339000061082000000004A021081080001FFFFB1
+:1033A00006108140000000020210800000001A8018
+:1033B0000610900000000024061091200000004A32
+:1033C000061093700000004A061095C00000004AE5
+:1033D0000210800400001080021080B00000000184
+:1033E0000210803C00000010021081040000000068
+:1033F00006108128000000020210800C000002B5B7
+:103400000210801400000000061084000000004A32
+:103410000210810C0001FFFF06108148000000022D
+:103420000210800400001A80061090900000002412
+:10343000061092480000004A061094980000004AC6
+:10344000061096E80000004A02108000000010807C
+:10345000021080AC00000002021080380000001052
+:103460000210810000000000061081200000000210
+:1034700002108008000002B5021080100000000059
+:10348000061082000000004A021081080001FFFFC0
+:1034900006108140000000020210800000001A8027
+:1034A0000610900000000024061091200000004A41
+:1034B000061093700000004A061095C00000004AF4
+:1034C0000210800400001080021080B00000000391
+:1034D0000210803C00000010021081040000000077
+:1034E00006108128000000020210800C000002B5C6
+:1034F0000210801400000000061084000000004A42
+:103500000210810C0001FFFF06108148000000023C
+:103510000210800400001A80061090900000002421
+:10352000061092480000004A061094980000004AD5
+:10353000061096E80000004A02108000000010808B
+:10354000021080AC0000000402108038000000105F
+:10355000021081000000000006108120000000021F
+:1035600002108008000002B5021080100000000068
+:10357000061082000000004A021081080001FFFFCF
+:1035800006108140000000020210800000001A8036
+:103590000610900000000024061091200000004A50
+:1035A000061093700000004A061095C00000004A03
+:1035B0000210800400001080021080B0000000059E
+:1035C0000210803C00000010021081040000000086
+:1035D00006108128000000020210800C000002B5D5
+:1035E0000210801400000000061084000000004A51
+:1035F0000210810C0001FFFF06108148000000024C
+:103600000210800400001A80061090900000002430
+:10361000061092480000004A061094980000004AE4
+:10362000061096E80000004A02108000000010809A
+:10363000021080AC0000000602108038000000106C
+:10364000021081000000000006108120000000022E
+:1036500002108008000002B5021080100000000077
+:10366000061082000000004A021081080001FFFFDE
+:1036700006108140000000020210800000001A8045
+:103680000610900000000024061091200000004A5F
+:10369000061093700000004A061095C00000004A12
+:1036A0000210800400001080021080B000000007AB
+:1036B0000210803C00000010021081040000000095
+:1036C00006108128000000020210800C000002B5E4
+:1036D0000210801400000000061084000000004A60
+:1036E0000210810C0001FFFF06108148000000025B
+:1036F0000210800400001A80061090900000002440
+:10370000061092480000004A061094980000004AF3
+:10371000061096E80000004A021205B00000000101
+:103720000212049000E383400212051400003C10D2
+:103730000212066C00000001021206700000000078
+:1037400002120494FFFFFFFF02120498FFFFFFFF25
+:103750000212049CFFFFFFFF021204A0FFFFFFFF05
+:10376000021204A4FFFFFFFF021204A8FFFFFFFFE5
+:10377000021204ACFFFFFFFF021204B0FFFFFFFFC5
+:10378000021204BCFFFFFFFF021204C0FFFFFFFF95
+:10379000021204C4FFFFFFFF021204C8FFFFFFFF75
+:1037A000021204CCFFFFFFFF021204D0FFFFFFFF55
+:1037B000021204D8FFFFFFFF021204DCFFFFFFFF2D
+:1037C000021204E0FFFFFFFF021204E4FFFFFFFF0D
+:1037D000021204E8FFFFFFFF021204ECFFFFFFFFED
+:1037E000021204F0FFFFFFFF021204F4FFFFFFFFCD
+:1037F000021204F8FFFFFFFF021204FCFFFFFFFFAD
+:1038000002120500FFFFFFFF02120504FFFFFFFF8A
+:1038100002120508FFFFFFFF0212050CFFFFFFFF6A
+:1038200002120510FFFFFFFF021204D4FF802000E8
+:10383000021204B4F0005000021204B8F0001000AC
+:1038400002120390000000080212039C000000080E
+:10385000021203A000000008021203A400000002EC
+:10386000021203BC00000004021203C000000005A5
+:10387000021203C400000004021203D00000000082
+:103880000212036C00000001021203680000003FF6
+:10389000021201BC00000040021201C00000180822
+:1038A000021201C400000803021201C8000008034C
+:1038B000021201CC00000040021201D000000003FF
+:1038C000021201D400000803021201D8000008030C
+:1038D000021201DC00000803021201E000010003F3
+:1038E000021201E400000803021201E800000803CC
+:1038F000021201EC00000003021201F000000003BC
+:10390000021201F400000003021201F8000000039B
+:10391000021201FC0000000302120200000000037A
+:103920000212020400000003021202080000000359
+:103930000212020C00000003021202100000000339
+:103940000212021400000003021202180000000319
+:103950000212021C000000030212022000000003F9
+:1039600002120224000000030212022800002403B5
+:103970000212022C0000002F021202300000000987
+:103980000212023400000019021202380000018401
+:103990000212023C000001830212024000000306F2
+:1039A0000212024400000019021202480000000640
+:1039B0000212024C0000030602120250000003062D
+:1039C00002120254000003060212025800000C8684
+:1039D0000212025C000003060212026000000306ED
+:1039E00002120264000000060212026800000006D3
+:1039F0000212026C000000060212027000000006B3
+:103A00000212027400000006021202780000000692
+:103A10000212027C00000006021202800000000672
+:103A20000212028400000006021202880000000652
+:103A30000212028C00000006021202900000000632
+:103A40000212029400000006021202980000000612
+:103A50000212029C00000006021202A000000306EF
+:103A6000021202A400000013021202A800000006C5
+:103A7000021202B000001004021202B4000010048E
+:103A80000212032400106440021203280010644054
+:103A9000021205B400000001021201B00000000192
+:103AA0000600A000000000160200A0EC5554000023
+:103AB0000200A0F0555555550200A0F400005555E0
+:103AC0000200A0F8F00000000200A0FC5554000025
+:103AD0000200A100555555550200A104000055559E
+:103AE0000200A108F00000000200A18C5554000063
+:103AF0000200A190555555550200A194000055555E
+:103B00000200A198F00000000200A19C000000004B
+:103B10000200A1A0000100000200A1A400005014B6
+:103B20000200A1A8000000000200A45C00000C003C
+:103B30000200A61C000000030200A06CFF5C000055
+:103B40000200A070FFF55FFF0200A0740000FFFFFD
+:103B50000200A078F00003E00200A07C000000005A
+:103B60000200A0800000A0000600A0840000000564
+:103B70000200A0980FE000000600A09C00000007D3
+:103B80000200A0B8000004000600A0BC0000000372
+:103B90000200A0C8000010000600A0CC0000000336
+:103BA0000200A0D8000040000600A0DC00000003D6
+:103BB0000200A0E8000100000600A22C00000004A2
+:103BC0000200A10CFF5C00000200A110FFF55FFFE6
+:103BD0000200A1140000FFFF0200A118F00003E0A2
+:103BE0000200A11C000000000200A1200000A000B3
+:103BF0000600A124000000050200A1380FE000002B
+:103C00000600A13C000000070200A15800000800C7
+:103C10000600A15C000000030200A1680000200073
+:103C20000600A16C000000030200A17800008000E3
+:103C30000600A17C000000030200A1880002000031
+:103C40000600A23C0000000400000000000000008C
+:103C50000000003100000000000000000000000033
+:103C60000000000000000000000000000000000054
+:103C700000000000000000000000000000310032E1
+:103C80000000000000000000000000000000000034
+:103C90000000000000000000000000000000000024
+:103CA000000000000000000000320056000000008C
+:103CB0000000000000000000000000000000000004
+:103CC00000000000000000000000000000000000F4
+:103CD000000000000056008C000000000000000002
+:103CE000008C009000900094009400980098009C34
+:103CF000009C00A000A000A400A400A800A800ACA4
+:103D000000AC00B100B100B300B300B5000000008A
+:103D100000000000000000000000000000000000A3
+:103D200000000000000000000000000000B50102DB
+:103D30000102010A010A01120112011B011B0124E7
+:103D40000124012D012D01360136013F013F0148BB
+:103D5000014801510151015A00000000000000001B
+:103D60000000000000000000000000000000000053
+:103D70000000000000000000000000000000000043
+:103D80000000000000000000000000000000000033
+:103D90000000000000000000000000000000000023
+:103DA0000000000000000000000000000000000013
+:103DB0000000000000000000000000000000000003
+:103DC00000000000000000000000000000000000F3
+:103DD00000000000000000000000000000000000E3
+:103DE00000000000000000000000000000000000D3
+:103DF00000000000000000000000000000000000C3
+:103E00000000000000000000015A015F00000000F7
+:103E100000000000015F0160016001610161016259
+:103E2000016201630163016401640165016501666A
+:103E300001660167000000000000000000000000B3
+:103E40000000000000000000000000000000000072
+:103E50000000000000000000000000000000000062
+:103E60000167016C016C0179017901860000000095
+:103E70000000000000000000000000000000000042
+:103E80000000000000000000000000000000000032
+:103E90000000000000000000000000000000000022
+:103EA0000000000000000000000000000000000012
+:103EB00000000000000000000186018700000000F3
+:103EC00000000000000000000000000000000000F2
+:103ED00000000000000000000000000000000000E2
+:103EE00000000000018701BE00000000000000008B
+:103EF00000000000000000000000000000000000C2
+:103F000000000000000000000000000000000000B1
+:103F100001BE01E9000000000000000000000000F8
+:103F20000000000000000000000000000000000091
+:103F300000000000000000000000000001E9021A7B
+:103F40000000000000000000021A022102210228E5
+:103F50000228022F022F02360236023D023D0244A1
+:103F60000244024B024B02520252028A000000003D
+:103F700000000000028A028E028E029202920296D5
+:103F80000296029A029A029E029E02A202A202A631
+:103F900002A602AA02AA02FA02FA031103110328D6
+:103FA0000328032B032B032E032E03310331033489
+:103FB000033403370337033A033A033D033D034019
+:103FC00003400381038103880388038F038F0393D6
+:103FD000039303970397039B039B039F039F03A3F1
+:103FE00003A303A703A703AB03AB03AF03AF03B064
+:103FF00000000000000000000000000000000000C1
+:1040000000000000000000000000000000000000B0
+:10401000000000000000000003B003C20000000028
+:104020000000000000000000000000000000000090
+:104030000000000000000000000000000000000080
+:104040000000000003C203D703D703DA03DA03DD5D
+:104050000000000000000000000000000000000060
+:104060000000000000000000000000000000000050
+:1040700003DD040A00000000000000000000000052
+:104080000000000000000000000000000000000030
+:10409000000000000000000000000000040A050D00
+:1040A0000000000000000000000000000000000010
+:1040B0000000000000000000000000000000000000
+:1040C0000000000000000000050D0514051405188F
+:1040D0000518051C000000000000000000000000A2
+:1040E00000000000000000000000000000000000D0
+:1040F00000000000051C055C00000000000000003E
+:10410000055C05650565056E056E05770577058017
+:1041100005800589058905920592059B059B05A4E7
+:1041200005A405FD05FD0613061306290629062D1F
+:10413000062D063106310635063506390639063DA7
+:10414000063D064106410645064506490649065014
+:10415000000000000000000000000000000000005F
+:10416000000000000000000000000000000000004F
+:10417000000000000000000006500656000000008D
+:10418000000000000000000000000000000000002F
+:10419000000000000000000000000000000000001F
+:1041A0000000000006560659000000000000000054
+:1041B00000000000000000000000000000000000FF
+:1041C00000000000000000000000000000000000EF
+:1041D0000659065F0000000000000000000000001B
+:1041E00000000000000000000000000000000000CF
+:1041F00000000000000000000000000000000000BF
+:104200000000000000000000065F066E066E067DDE
+:10421000067D068C068C069B069B06AA06AA06B996
+:1042200006B906C806C806D706D70748000000002A
+:10423000000000000000000000000000000000007E
+:10424000000000000000000000000000000000006E
+:10425000000000000748075B075B076C076C077DE1
+:10426000000000000000000000000000000000004E
+:10427000000000000000000000000000000000003E
+:10428000000000000000000000000000000000002E
+:10429000000000000000000000000000000000001E
+:1042A000000000000000000000000000000000000E
+:1042B00000000000000000000000000000000000FE
+:1042C00000000000000000000000000000000000EE
+:1042D00000000000000000000000000000000000DE
+:1042E00000010000000204C00003098000040E4029
+:1042F00000051300000617C000071C8000082140BD
+:1043000000092600000A2AC0000B2F80000C344050
+:10431000000D3900000E3DC0000F428000104740E4
+:1043200000114C00001250C00013558000145A4078
+:1043300000155F00001663C00017688000186D400C
+:1043400000197200001A76C0001B7B80001C8040A0
+:10435000001D8500001E89C0001F8E800020934034
+:10436000000020000000400000006000000080000D
+:104370000000A0000000C0000000E00000010000FC
+:1043800000012000000140000001600000018000E9
+:104390000001A0000001C0000001E00000020000D8
+:1043A00000022000000240000002600000028000C5
+:1043B0000002A0000002C0000002E00000030000B4
+:1043C00000032000000340000003600000038000A1
+:1043D0000003A0000003C0000003E0000004000090
+:1043E000000420000004400000046000000480007D
+:1043F0000004A0000004C0000004E000000500006C
+:104400000005200000054000000560000005800058
+:104410000005A0000005C0000005E0000006000047
+:104420000006200000064000000660000006800034
+:104430000006A0000006C0000006E0000007000023
+:104440000007200000074000000760000007800010
+:104450000007A0000007C0000007E00000080000FF
+:1044600000082000000840000008600000088000EC
+:104470000008A0000008C0000008E00000090000DB
+:1044800000092000000940000009600000098000C8
+:104490000009A0000009C0000009E000000A0000B7
+:1044A000000A2000000A4000000A6000000A8000A4
+:1044B000000AA000000AC000000AE000000B000093
+:1044C000000B2000000B4000000B6000000B800080
+:1044D000000BA000000BC000000BE000000C00006F
+:1044E000000C2000000C4000000C6000000C80005C
+:1044F000000CA000000CC000000CE000000D00004B
+:10450000000D2000000D4000000D6000000D800037
+:10451000000DA000000DC000000DE000000E000026
+:10452000000E2000000E4000000E6000000E800013
+:10453000000EA000000EC000000EE000000F000002
+:10454000000F2000000F4000000F6000000F8000EF
+:10455000000FA000000FC000000FE00000100000DE
+:1045600000102000001040000010600000108000CB
+:104570000010A0000010C0000010E00000110000BA
+:1045800000112000001140000011600000118000A7
+:104590000011A0000011C0000011E0000012000096
+:1045A0000012200000124000001260000012800083
+:1045B0000012A0000012C0000012E0000013000072
+:1045C000001320000013400000136000001380005F
+:1045D0000013A0000013C0000013E000001400004E
+:1045E000001420000014400000146000001480003B
+:1045F0000014A0000014C0000014E000001500002A
+:104600000015200000154000001560000015800016
+:104610000015A0000015C0000015E0000016000005
+:1046200000162000001640000016600000168000F2
+:104630000016A0000016C0000016E00000170000E1
+:1046400000172000001740000017600000178000CE
+:104650000017A0000017C0000017E00000180000BD
+:1046600000182000001840000018600000188000AA
+:104670000018A0000018C0000018E0000019000099
+:104680000019200000194000001960000019800086
+:104690000019A0000019C0000019E000001A000075
+:1046A000001A2000001A4000001A6000001A800062
+:1046B000001AA000001AC000001AE000001B000051
+:1046C000001B2000001B4000001B6000001B80003E
+:1046D000001BA000001BC000001BE000001C00002D
+:1046E000001C2000001C4000001C6000001C80001A
+:1046F000001CA000001CC000001CE000001D000009
+:10470000001D2000001D4000001D6000001D8000F5
+:10471000001DA000001DC000001DE000001E0000E4
+:10472000001E2000001E4000001E6000001E8000D1
+:10473000001EA000001EC000001EE000001F0000C0
+:10474000001F2000001F4000001F6000001F8000AD
+:10475000001FA000001FC000001FE000002000009C
+:104760000020200000204000002060000020800089
+:104770000020A0000020C0000020E0000021000078
+:104780000021200000214000002160000021800065
+:104790000021A0000021C0000021E0000022000054
+:1047A0000022200000224000002260000022800041
+:1047B0000022A0000022C0000022E0000023000030
+:1047C000002320000023400000236000002380001D
+:1047D0000023A0000023C0000023E000002400000C
+:1047E00000242000002440000024600000248000F9
+:1047F0000024A0000024C0000024E00000250000E8
+:1048000000252000002540000025600000258000D4
+:104810000025A0000025C0000025E00000260000C3
+:1048200000262000002640000026600000268000B0
+:104830000026A0000026C0000026E000002700009F
+:10484000002720000027400000276000002780008C
+:104850000027A0000027C0000027E000002800007B
+:104860000028200000284000002860000028800068
+:104870000028A0000028C0000028E0000029000057
+:104880000029200000294000002960000029800044
+:104890000029A0000029C0000029E000002A000033
+:1048A000002A2000002A4000002A6000002A800020
+:1048B000002AA000002AC000002AE000002B00000F
+:1048C000002B2000002B4000002B6000002B8000FC
+:1048D000002BA000002BC000002BE000002C0000EB
+:1048E000002C2000002C4000002C6000002C8000D8
+:1048F000002CA000002CC000002CE000002D0000C7
+:10490000002D2000002D4000002D6000002D8000B3
+:10491000002DA000002DC000002DE000002E0000A2
+:10492000002E2000002E4000002E6000002E80008F
+:10493000002EA000002EC000002EE000002F00007E
+:10494000002F2000002F4000002F6000002F80006B
+:10495000002FA000002FC000002FE000003000005A
+:104960000030200000304000003060000030800047
+:104970000030A0000030C0000030E0000031000036
+:104980000031200000314000003160000031800023
+:104990000031A0000031C0000031E0000032000012
+:1049A00000322000003240000032600000328000FF
+:1049B0000032A0000032C0000032E00000330000EE
+:1049C00000332000003340000033600000338000DB
+:1049D0000033A0000033C0000033E00000340000CA
+:1049E00000342000003440000034600000348000B7
+:1049F0000034A0000034C0000034E00000350000A6
+:104A00000035200000354000003560000035800092
+:104A10000035A0000035C0000035E0000036000081
+:104A2000003620000036400000366000003680006E
+:104A30000036A0000036C0000036E000003700005D
+:104A4000003720000037400000376000003780004A
+:104A50000037A0000037C0000037E0000038000039
+:104A60000038200000384000003860000038800026
+:104A70000038A0000038C0000038E0000039000015
+:104A80000039200000394000003960000039800002
+:104A90000039A0000039C0000039E000003A0000F1
+:104AA000003A2000003A4000003A6000003A8000DE
+:104AB000003AA000003AC000003AE000003B0000CD
+:104AC000003B2000003B4000003B6000003B8000BA
+:104AD000003BA000003BC000003BE000003C0000A9
+:104AE000003C2000003C4000003C6000003C800096
+:104AF000003CA000003CC000003CE000003D000085
+:104B0000003D2000003D4000003D6000003D800071
+:104B1000003DA000003DC000003DE000003E000060
+:104B2000003E2000003E4000003E6000003E80004D
+:104B3000003EA000003EC000003EE000003F00003C
+:104B4000003F2000003F4000003F6000003F800029
+:104B5000003FA000003FC000003FE000003FE00138
+:104B600000000000000001FF0000020000007FF8CC
+:104B700000007FF800000CDF0000150000000001BD
+:104B80000000000100000001FFFFFFFFFFFFFFFF2B
+:104B9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF25
+:104BA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF15
+:104BB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF05
+:104BC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF5
+:104BD000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE5
+:104BE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD5
+:104BF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC5
+:104C0000FFFFFFFFFFFFFFFFFFFFFFFF00000000B0
+:104C1000FFFFFFFF00000000FFFFFFFFFFFFFFFFA0
+:104C200000000000FFFFFFFF00000000FFFFFFFF8C
+:104C3000FFFFFFFF00000000FFFFFFFF000000007C
+:104C4000FFFFFFFF0000000300BEBC20FFFFFFFFCF
+:104C500000000000FFFFFFFF00000000FFFFFFFF5C
+:104C60000000000300BEBC20FFFFFFFF00000000AB
+:104C7000FFFFFFFF00000000FFFFFFFF0000000339
+:104C800000BEBC20FFFFFFFF00000000FFFFFFFF92
+:104C900000000000FFFFFFFF0000000300BEBC207B
+:104CA000FFFFFFFF00000000FFFFFFFF000000000C
+:104CB000FFFFFFFF0000000300BEBC20FFFFFFFF5F
+:104CC00000000000FFFFFFFF00000000FFFFFFFFEC
+:104CD0000000000300BEBC2000002000000040C017
+:104CE00000006180000082400000A3000000C3C0FB
+:104CF0000000E4800001054000012600000146C0DC
+:104D000000016780000188400001A9000001C9C0BE
+:104D10000001EA8000020B4000022C0000024CC09F
+:104D200000026D8000028E400002AF000002CFC082
+:104D30000002F0800003114000033200000352C063
+:104D400000037380000394400003B5000003D5C046
+:104D50000003F6800004174000043800000458C027
+:104D60000004798000049A40000080000001038064
+:104D70000001870000020A8000028E0000031180FB
+:104D8000000395000004188000049C0000051F80AB
+:104D90000005A300000626800006AA0000072D805B
+:104DA0000007B100000834800008B80000093B800B
+:104DB0000009BF00000A4280000AC600000B4980BB
+:104DC000000BCD00000C5080000CD400000D57806B
+:104DD000000DDB0000007FF800007FF80000193EA6
+:104DE0000000350000001900001000000000000065
+:104DF00000000000FFFFFFFF400000004000000037
+:104E000040000000400000004000000040000000A2
+:104E10004000000040000000400000004000000092
+:104E20004000000040000000400000004000000082
+:104E30004000000040000000400000004000000072
+:104E40004000000040000000400000004000000062
+:104E50004000000040000000400000004000000052
+:104E60004000000040000000400000004000000042
+:104E7000400000004000000000007FF800007FF8C4
+:104E8000000005C700001500FFFFFFFFFFFFFFFF49
+:104E9000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF22
+:104EA000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF12
+:104EB000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF02
+:104EC000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF2
+:104ED000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE2
+:104EE000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD2
+:104EF000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFC2
+:104F0000FFFFFFFFFFFFFFFF400000004000000029
+:104F10004000000040000000400000004000000091
+:104F20004000000040000000400000004000000081
+:104F30004000000040000000400000004000000071
+:104F40004000000040000000400000004000000061
+:104F50004000000040000000400000004000000051
+:104F60004000000040000000400000004000000041
+:104F70004000000040000000400000004000000031
+:104F800040000000400000000000100000002080F1
+:104F900000003100000041800000520000006280EB
+:104FA0000000730000008380000094000000A480D3
+:104FB0000000B5000000C5800000D6000000E680BB
+:104FC0000000F700000107800001180000012880A0
+:104FD000000139000001498000015A0000016A8087
+:104FE00000017B0000018B8000019C000001AC806F
+:104FF0000001BD000001CD800001DE000001EE8057
+:105000000001FF0000007FF800007FF80000112E73
+:105010000000350010000000000028AD0000000076
+:105020000001000100070205CCCCCCC5FFFFFFFF4B
+:10503000FFFFFFFF7058103C000000000000000060
+:1050400000000001CCCC0201CCCCCCCCCCCC0201F9
+:10505000CCCCCCCCCCCC0201CCCCCCCCCCCC0201BA
+:10506000CCCCCCCCCCCC0201CCCCCCCCCCCC0201AA
+:10507000CCCCCCCCCCCC0201CCCCCCCCCCCC02019A
+:10508000CCCCCCCC00000000FFFFFFFF40000000B4
+:105090004000000040000000400000004000000010
+:1050A0004000000040000000400000004000000000
+:1050B00040000000400000004000000040000000F0
+:1050C00040000000400000004000000040000000E0
+:1050D00040000000400000004000000040000000D0
+:1050E00040000000400000004000000040000000C0
+:1050F00040000000400000004000000040000000B0
+:10510000400000004000000040000000002625A0F4
+:1051100000000000002625A000000000002625A0B9
+:1051200000000000002625A000000000000E023252
+:10513000011600D60010000000000000002625A087
+:1051400000000000002625A000000000002625A089
+:1051500000000000002625A00000000000720236BA
+:10516000012300F300100000000000000000FFFF1A
+:10517000000000000000FFFF000000000000FFFF33
+:10518000000000000000FFFF000000000000FFFF23
+:10519000000000000000FFFF000000000000FFFF13
+:1051A000000000000000FFFF000000000000FFFF03
+:1051B000000000000000FFFF000000000000FFFFF3
+:1051C000000000000000FFFF000000000000FFFFE3
+:1051D000000000000000FFFF000000000000FFFFD3
+:1051E000000000000000FFFF000000000000FFFFC3
+:1051F000000000000000FFFF000000000000FFFFB3
+:10520000000000000000FFFF000000000000FFFFA2
+:10521000000000000000FFFF000000000000FFFF92
+:10522000000000000000FFFF000000000000FFFF82
+:10523000000000000000FFFF000000000000FFFF72
+:10524000000000000000FFFF000000000000FFFF62
+:10525000000000000000FFFF000000000000FFFF52
+:10526000000000000000FFFF000000000000FFFF42
+:10527000000000000000FFFF000000000000FFFF32
+:10528000000000000000FFFF000000000000FFFF22
+:10529000000000000000FFFF000000000000FFFF12
+:1052A000000000000000FFFF000000000000FFFF02
+:1052B000000000000000FFFF000000000000FFFFF2
+:1052C000000000000000FFFF000000000000FFFFE2
+:1052D000000000000000FFFF000000000000FFFFD2
+:1052E000000000000000FFFF000000000000FFFFC2
+:1052F000000000000000FFFF000000000000FFFFB2
+:10530000000000000000FFFF000000000000FFFFA1
+:10531000000000000000FFFF000000000000FFFF91
+:10532000000000000000FFFF000000000000FFFF81
+:10533000000000000000FFFF000000000000FFFF71
+:10534000000000000000FFFF000000000000FFFF61
+:10535000000000000000FFFF000000000000FFFF51
+:10536000000000000000FFFF00000000FFFFFFF34F
+:10537000318FFFFF0C30C30CC30C30C3CF3CF300A4
+:10538000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FF
+:1053900030EFFFFF0C30C30CC30C30C3CF3CF30025
+:1053A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D9
+:1053B000305FFFFF0C30C30CC30C30C3CF3CF30095
+:1053C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B3
+:1053D0001CBFFFFF0C30C305C30C30C3CF3000141B
+:1053E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF29A
+:1053F000304FFFFF0C30C30CC30C30C3CF3CF30065
+:10540000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6D
+:10541000302FFFFF0C30C30CC30C30C3CF3CF30064
+:10542000F3CF3CF30010CF3CCDCDCDCDFFFFFFF748
+:1054300031EFFFFF0C30C30CC30C30C3CF3CF30083
+:10544000F3CF3CF30020CF3CCDCDCDCDFFFFFFF51A
+:10545000302FFFFF0C30C30CC30C30C3CF3CF30024
+:10546000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DC
+:10547000318FFFFF0C30C30CC30C30C3CF3CF300A3
+:10548000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FE
+:10549000310FFFFF0C30C30CC30C30C3CF3CF30003
+:1054A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D8
+:1054B000305FFFFF0C30C30CC30C30C3CF3CF30094
+:1054C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B2
+:1054D0001CBFFFFF0C30C305C30C30C3CF3000141A
+:1054E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF299
+:1054F000304FFFFF0C30C30CC30C30C3CF3CF30064
+:10550000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6C
+:10551000302FFFFF0C30C30CC30C30C3CF3CF30063
+:10552000F3CF3CF30010CF3CCDCDCDCDFFFFFFF747
+:1055300030EFFFFF0C30C30CC30C30C3CF3CF30083
+:10554000F3CF3CF30020CF3CCDCDCDCDFFFFFFF519
+:10555000304FFFFF0C30C30CC30C30C3CF3CF30003
+:10556000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DB
+:1055700031EFFFFF0C30C30CC30C30C3CF3CF30042
+:10558000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FD
+:10559000310FFFFF0C30C30CC30C30C3CF3CF30002
+:1055A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D7
+:1055B000305FFFFF0C30C30CC30C30C3CF3CF30093
+:1055C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B1
+:1055D0001CBFFFFF0C30C305C30C30C3CF30001419
+:1055E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF298
+:1055F000304FFFFF0C30C30CC30C30C3CF3CF30063
+:10560000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA6B
+:10561000302FFFFF0C30C30CC30C30C3CF3CF30062
+:10562000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A6
+:10563000056FFFFF0C30C30CC30C30C3CF3CC00060
+:10564000F3CF3CF30020CF3CCDCDCDCDFFFFFFF518
+:10565000310FFFFF0C30C30CC30C30C3CF3CF30041
+:10566000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3DA
+:10567000320FFFFF0C30C30CC30C30C3CF3CF30020
+:10568000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FC
+:10569000310FFFFF0C30C30CC30C30C3CF3CF30001
+:1056A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D6
+:1056B000305FFFFF0C30C30CC30C30C3CF3CF30092
+:1056C000F3CF3CF30002CF3CCDCDCDCDFFFFF406B0
+:1056D0001CBFFFFF0C30C305C30C30C3CF30001418
+:1056E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF297
+:1056F000304FFFFF0C30C30CC30C30C3CF3CF30062
+:10570000F3CF3CF30008CF3CCDCDCDCDFFFFFF8ADA
+:10571000042FFFFF0C30C30CC30C30C3CF3CC000C0
+:10572000F3CF3CF30010CF3CCDCDCDCDFFFFFF97A5
+:1057300005CFFFFF0C30C30CC30C30C3CF3CC000FF
+:10574000F3CF3CF30020CF3CCDCDCDCDFFFFFFF517
+:10575000310FFFFF0C30C30CC30C30C3CF3CF30040
+:10576000F3CF3CF30040CF3CCDCDCDCDFFFFFFF3D9
+:10577000316FFFFF0C30C30CC30C30C3CF3CF300C0
+:10578000F3CF3CF30000CF3CCDCDCDCDFFFFFFF1FB
+:10579000302FFFFF0C30C30CC30C30C3CF3CF300E1
+:1057A000F3CF3CF30001CF3CCDCDCDCDFFFFFFF6D5
+:1057B000305FFFFF0C30C30CC30C30C3CF3CF30091
+:1057C000F3CF3CF30002CF3CCDCDCDCDFFFFFFF6B4
+:1057D00030BFFFFF0C30C30CC30C30C3CF3CF314FD
+:1057E000F3CF3CF30004CF3CCDCDCDCDFFFFFFF296
+:1057F000304FFFFF0C30C30CC30C30C3CF3CF30061
+:10580000F3CF3CF30008CF3CCDCDCDCDFFFFFFFA69
+:10581000302FFFFF0C30C30CC30C30C3CF3CF30060
+:10582000F3CF3CF30010CF3CCDCDCDCDFFFFFFF744
+:1058300031CFFFFF0C30C30CC30C30C3CF3CF3009F
+:10584000F3CF3CF30020CF3CCDCDCDCDFFFFFFF01B
+:10585000307FFFFF0C30C30CC30C30C3CF3CF300D0
+:10586000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCC
+:1058700030CFFFFF0C30C30CC30C30C3CF3CF3CC94
+:10588000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEC
+:1058900030CFFFFF0C30C30CC30C30C3CF3CF3CC74
+:1058A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCB
+:1058B00030CFFFFF0C30C30CC30C30C3CF3CF3CC54
+:1058C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFAA
+:1058D00030CFFFFF0C30C30CC30C30C3CF3CF3CC34
+:1058E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF88
+:1058F00030CFFFFF0C30C30CC30C30C3CF3CF3CC14
+:10590000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF63
+:1059100030CFFFFF0C30C30CC30C30C3CF3CF3CCF3
+:10592000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3B
+:1059300030CFFFFF0C30C30CC30C30C3CF3CF3CCD3
+:10594000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0B
+:1059500030CFFFFF0C30C30CC30C30C3CF3CF3CCB3
+:10596000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCB
+:1059700030CFFFFF0C30C30CC30C30C3CF3CF3CC93
+:10598000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEB
+:1059900030CFFFFF0C30C30CC30C30C3CF3CF3CC73
+:1059A000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFCA
+:1059B00030CFFFFF0C30C30CC30C30C3CF3CF3CC53
+:1059C000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA9
+:1059D00030CFFFFF0C30C30CC30C30C3CF3CF3CC33
+:1059E000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF87
+:1059F00030CFFFFF0C30C30CC30C30C3CF3CF3CC13
+:105A0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF62
+:105A100030CFFFFF0C30C30CC30C30C3CF3CF3CCF2
+:105A2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF3A
+:105A300030CFFFFF0C30C30CC30C30C3CF3CF3CCD2
+:105A4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF0A
+:105A500030CFFFFF0C30C30CC30C30C3CF3CF3CCB2
+:105A6000F3CF3CF30040CF3CCDCDCDCDFFFFFFFFCA
+:105A700030CFFFFF0C30C30CC30C30C3CF3CF3CC92
+:105A8000F3CF3CF30000CF3CCDCDCDCDFFFFFFFFEA
+:105A900030CFFFFF0C30C30CC30C30C3CF3CF3CC72
+:105AA000F3CF3CF30001CF3CCDCDCDCDFFFFFFFFC9
+:105AB00030CFFFFF0C30C30CC30C30C3CF3CF3CC52
+:105AC000F3CF3CF30002CF3CCDCDCDCDFFFFFFFFA8
+:105AD00030CFFFFF0C30C30CC30C30C3CF3CF3CC32
+:105AE000F3CF3CF30004CF3CCDCDCDCDFFFFFFFF86
+:105AF00030CFFFFF0C30C30CC30C30C3CF3CF3CC12
+:105B0000F3CF3CF30008CF3CCDCDCDCDFFFFFFFF61
+:105B100030CFFFFF0C30C30CC30C30C3CF3CF3CCF1
+:105B2000F3CF3CF30010CF3CCDCDCDCDFFFFFFFF39
+:105B300030CFFFFF0C30C30CC30C30C3CF3CF3CCD1
+:105B4000F3CF3CF30020CF3CCDCDCDCDFFFFFFFF09
+:105B500030CFFFFF0C30C30CC30C30C3CF3CF3CCB1
+:105B6000F3CF3CF30040CF3CCDCDCDCD000C0000B9
+:105B7000000700C000028130000B815800020210B3
+:105B800000010230000F024000010330000C000051
+:105B9000000800C000028140000B81680002022062
+:105BA0000001024000070250000202C0000F000086
+:105BB000000800F000028170000B81980002025082
+:105BC00000010270000B8280000803380010000002
+:105BD0000008010000028180000B81A80002026021
+:105BE00000018280000E829800080380000B0000F4
+:105BF000000100B0000280C0000580E80002014002
+:105C000000010160000E017000038250CCCCCCCCAE
+:105C1000CCCCCCCCCCCCCCCCCCCCCCCC00002000D4
+:105C2000CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCB4
+:105C300000002000CCCCCCCCCCCCCCCCCCCCCCCCB4
+:105C4000CCCCCCCC04002000000000000000000000
+:105C50001F8B080000000000000BFB51CFC0F003B9
+:105C60008A59051918AC84117C7A607E4ECAF43BBF
+:105C7000F232303803B12B103700F1616E06862303
+:105C8000DCC4EBBF2C8F6087CA32303402F11E694E
+:105C900006063B3984B8B90203C30A203F0B2AF633
+:105CA0001E4897CA53E6EEC182B55531C5349411EA
+:105CB0006C1D2CF2C858174DBE5D1995AF4740FFBB
+:105CC00040E32C1D54FE742D08FD4D1B4267A3C9F3
+:105CD000CF80CAFB40FD95A383DD5C5F22FD9DCA9A
+:105CE00082CA8F47E3B731A2F2CD3850F94950F557
+:105CF00000CDA28F7AC80300000000000000000061
+:105D00001F8B080000000000000BED7D0D7854D5BE
+:105D1000B5E83A73CEFC25672693908409093009CB
+:105D200021441B700C3F0D16EB097F8636D70E14ED
+:105D3000696C150744881048A4D6874FFD3291003E
+:105D4000E17F504B43413CFC29BD97B691A2A596FB
+:105D5000D2019F165BDFF782CF7AB5B5BD23A5F8D8
+:105D6000539498774BEDBBDEFAF65A7B9FCC3927DC
+:105D7000332448BDED7BEFC6AF3DEC73F6CFFADBC5
+:105D80006BAFB5F6DA7B9C0E37148E04F818FF6EF5
+:105D900000F81715000A524FA70762D9D700E4E6AA
+:105DA0006BB16415C0D07C2D0113D8FB802BE49619
+:105DB00052ED8CE789DC9941ACD75EA00581F5D125
+:105DC0009E3B0FA2D857B411A01040F100FD19F569
+:105DD0009D81391EA8A2577FF9D8F82E03AC0994EB
+:105DE000E5603B7BFF003AC04473D90160F4C9DA37
+:105DF000790D78CBD98B7C80AC090EFDC652067725
+:105E0000B99EC0727688C1CDCA274A5FF08C62788D
+:105E10006CB8DE117653EBBB012601ACC4BE42EC7C
+:105E2000FDD884F8AE84B13C433ED4E662E5EC7222
+:105E3000A0FABEB1B1848BDA696A116B1700DE2E4D
+:105E400050B9B81EC601E468AE145CBC1EE19F2DBB
+:105E5000EA79CAADDFB361D307B21F4B4988F8585E
+:105E6000FF35EC7BA5E97BE5CCB7B0DF6C30B563E3
+:105E7000786CC37F14017C0E7CF9E7B0F3CFC26766
+:105E8000910E303D0F60727FFAA5E81623FE027076
+:105E9000BE78A1EF8FF8E0117CB8717AB2C1C1F081
+:105EA00056A73800F19E297FE4296374DC7C4A26DA
+:105EB0003A6C6E60FFC7BE6FAE73E8B152C2B3BE3C
+:105EC00088B51F29F0CC9BF8B2842C5AD7CACAEEE9
+:105ED000FE747687131ACA891A8E513F6EF66E08C1
+:105EE000932B77490FC9CDC81A464FA4CB031CEF9B
+:105EF00018FBEFE3B2143DDD063DA758E9E916F4BF
+:105F0000CCBBC74A47770DA3A31FBF5BE9A8E33FFC
+:105F100018BD1619742C80D144C7581ED177B0749F
+:105F2000CCB5D13160D031966C5050FE908E0CDEE5
+:105F3000AD9A03B259B9F735B72E23DD625A77907F
+:105F4000D5574563B586CBD16601D77AA4DF18FA59
+:105F5000E4700419BFAABA343E6F121296B3AB7440
+:105F600092772F23CB905294575552183D37563283
+:105F7000790D119C92A3A63F5CEC8FDA6F64F0A8B8
+:105F80002678367ABA3C122B6F63F0C624AC76388A
+:105F9000807269E0ED0E392CF45682593679E7703B
+:105FA0001AF06DD3F87C36C141EFA1BBAB436270F0
+:105FB0005E9CE1800DD2C0FD6EEDEBC7DABFBDDFA8
+:105FC00001E14B06BCE50CBF8B2FCAE10D8C3E1BDB
+:105FD000435D1D28E75BA7737CFBF3F90AC7EBE978
+:105FE000F1944F308D17EEF104D2EAB72B1C0772F3
+:105FF000AD78D504BC81AA2B1F07020B4622FF33C4
+:10600000F1E3AF067F88C16FA293B73C2061FFDE4A
+:10601000B10F7B80E6FD610FC2611FA71FBCB67187
+:10602000EDE32895314DA1924D1F057400937EA19B
+:106030003A217C727D921DB6EA196FA54DBF84ACE2
+:106040006545E81BC5A66F3EB0EBEB0983D4335A18
+:1060500023C11B12708198CFA3C47C9E762819F4AB
+:1060600030FA95EF32F4F5033FAF64F27040E8EB9D
+:10607000039D407AF64017D3D734AFB9BE1EC7414F
+:1060800083AA6FBEEC40FCF7F6E91B2B7DCAE2DA6F
+:1060900054D43BE5F1B003FB29DBC4F54D59478BE4
+:1060A00003F9344EE82D38CAE9E061FF99F5759996
+:1060B0001867D42E2B1DCB90BEAC5DD511DBFB1A1F
+:1060C000BEEE958189AE6CBCADF80F46AF6112A3F0
+:1060D000E367D8BF474305D171CA20D73D4147BBCD
+:1060E000BE2EC3B147313A3ECAF435C36F6480D384
+:1060F000B1BDC3010ED48FBB1CA41FC794461C584E
+:10610000CFD0DB0234A814F8EF13EB9D01E7A8070A
+:106110007A6A51B99743CF0937EB27771384132154
+:10612000D4D325B538CEE371AEA7CBE3E0889AECA3
+:10613000A15C01CFE3D37B5F1CC3EAF5C69530A217
+:10614000B91F420E4F698AAEC67A3B52C8E93F601A
+:106150002D931CDAF93852C8A59D3E6374ABFC96AA
+:106160003F6AE3C7266B79A44DAEEB0D7E18723DF6
+:10617000487EB81588B9F3B0AC937DE761342A60E6
+:1061800065F907CF6928D76A277F97DBE1D04B995C
+:10619000DCFADA7959E950F45A36EE6D6880B1F2DA
+:1061A000E818E86897CAD33548327A8F0E244066DB
+:1061B000EF474E87B06C9A2F869D69F06F94A0DFF1
+:1061C00028616FE43CD8EB45397F3CC0E88E7C7F8A
+:1061D0004011ED7BBC91B129BADBF5C3571AAC7401
+:1061E000BF39926DA1D7ACD0104B79FCA96197E46F
+:1061F00093A13F0C3932E8D68F0F312BDF7CD3AD22
+:10620000DFEDFAA74DB2E99F41F2C975122AD18E8E
+:1062100019E3C80AEF2DED5FEF61C921EC218F7EF4
+:10622000968DB70024C861FD2F87E408A4F7513587
+:1062300044DF5738928558BE003DDB878F4AF53FD3
+:106240004281A3520E53DA8CBCAB1848C33C90C8B1
+:1062500026BB18229E422201D14562FFBB95E44530
+:106260007120BD8A03FC3DC472142C07C1F80B5980
+:10627000ECC4A2552FFC5962F353124F19F9C8C64A
+:10628000774294E4C103712A6741173D55E8A6A7F8
+:106290001F7AE819808084CF3C08D313AED69F4A7A
+:1062A000901E7D2040F4F4FE0E3ECE4EE1B346F04B
+:1062B0006D1844BE2F4D443E24C023A7E4D02BE6E6
+:1062C00037B3D7482F7B2A99FC96A27FC0D6D52A10
+:1062D0009AFFDC9F99DE134379CE51615884BDDF6C
+:1062E000D81A20FDBCB9D543CF0EA16F4AAE796153
+:1062F000C71DEC9F8F8CAD79732F7B9E68DBAEA1A1
+:106300005DD33196EB97A1D3BBEB46A19D58AF70FF
+:10631000BBB09DDBAD39825A1DA393FA6A567FCB81
+:10632000DD9EB0797D31F4D096EB9307F7B1EF7A2B
+:106330004B167DD7A70B7BEC23C67FC30F42FA8594
+:1063400005DFEA136487B2F7311FABEFF990213F05
+:106350009E7D0FF6B4A6D33F1D6559A4FF3A4EAEFD
+:1063600087105BE7435A4C23BB760A33594BC9BEAF
+:1063700075C4AA70F6457F2531FAE6C40292A622BA
+:106380007D40C2761E740891BE4A3C68B657FBFA3F
+:106390001F1E0B2E64FDC5AE77850F90F88063DE5F
+:1063A000D8CC72BFBEEDDEAF6A69EC27BF4322FED8
+:1063B0009EBCBEB008FD5D17048AB227E03C72C1E6
+:1063C000015C9FAE5F3C329AA65D6A3E19F651FAB7
+:1063D00067A6766E195ABA4CFD963B1CA42FC1E1F4
+:1063E000A1676E09979750A5909B18687A1A3BF39E
+:1063F000F3027E8F128380B0A73F4D7ABD2D713896
+:10640000D74BD0D095061E1DE19988F3A02986FEB2
+:10641000404E1B9757A6B534AC1F52F8D3A87FA3A4
+:10642000A8FFA4C0E332F44DE1A3386FF307A9EF4E
+:1064300070DC34F884C5F89733EED651688C062C9E
+:1064400074B7F3B36F7C8797EA5DBC7E7B10FDE782
+:106450004C70865A58DDA1EC592F9E55E25949BA25
+:10646000BDDF7897DBDF144788F0B4F70BFBB9FD8D
+:106470009423D6A913935D34CF873F00229E62D523
+:106480001BC3991F89FA4D3FC8167809F5062F3F9F
+:10649000B61FC89EEABDE721B23B4B50AFCA18E712
+:1064A00088D23C2E8510950DFDB616F51D7B5E84B9
+:1064B000C82D8E02D42B5D27515FD64FB87B6ABAA8
+:1064C00078D11DC6FCB88CF5E8F3ECB9C013B9134C
+:1064D000FB57C3A735B66243EE5C29969DD37F5E1A
+:1064E00031F10CCE31CF873EB9E0F3A91DE5BD8A6D
+:1064F000CF9BD9AC5C579E1E4EBDED6291B0FB8622
+:10650000917FA3C0B039A6F9A83FC8E6156BF7B8CC
+:10651000E8CF78BF5DE017FB04F3A08E3D03615D1B
+:106520004375394F6F7122DF6E96A26B10EFB9F58C
+:1065300091E791F5EAC16E2D2B44EF3B1C6C9CBAA0
+:10654000501C3907AAD61DC3E763F72CD4908FBD22
+:106550004C67C969FC66E399A539AC7E92DDEF1BF7
+:10656000E47CBC3A1C9F8A765865C3891388EE0286
+:106570004F7427C23524F2945680F0864E6B7926EC
+:106580007E8D14FC5AE6E0F8E73E20F8A66841E468
+:10659000C75D10D98BED039AB0BB07094726F947B1
+:1065A0003B13E93812E59DE9CDF63093F7D2D47C60
+:1065B000C811F3A15DCC87DE095CFEDB03D58174D5
+:1065C000EB8521EF86FC1BFAD05E2FF109E4FC2A53
+:1065D000F6AC8000F9311721FADF900E0C7BB26B1C
+:1065E00072A777913F67CCABFAF0E9E943183EEA2E
+:1065F000845035D2DF18F7BC90BB051EEDE7241F91
+:10660000E56D4A1EC36BCC3D101EC5EACD2ACF9561
+:10661000CCF2FE6A5FFDC8699A5FF7746B4A68E066
+:1066200076FF43E077B31479CD2C87AC9F5F615937
+:106630000D75A384F5D13924EC7BB96D21D90F4CAC
+:106640003E0348E7792D2DCFE37873AB226BB0BEC4
+:10665000D1FFAC90CD6E97A26F61BF7639AD83B894
+:106660000297B17E8C94A217B09FFA5037C19B3B22
+:106670003D4272C6E0FEE05382FB2F48D74C70BF0C
+:10668000858D516F86F7905E63F0C9328363F403A2
+:1066900009258FE87E5A41BA333A3BE582149D07BB
+:1066A0003BCFB7897936D07C6FC77F4C46BB383A31
+:1066B00004C7CF13762E244F00F7AFAC71CA19F27E
+:1066C00079403B2BB72E09181F1A724A0EDFC83EBD
+:1066D0000DAD0309ED62C38ECD13F3D180674B9FDF
+:1066E0009D1CA4F933444D06232ACED74964B73DF7
+:1066F000529B0CA29FB7B63544DF033593D6DF110A
+:10670000C2E1A304C786D6B0B0AF6BE819AFEB3DCA
+:1067100085FB025B820EB27F37B5561A71598237FC
+:10672000CFB093EBCE909DDC1BCC127EA315BE7830
+:10673000DD19CBBE87D10E82A6385619F623ECEBB5
+:1067400010D73703B5574BAC74EF6BAF0DAE7DD69A
+:10675000046BFB5A2DD981F1C400C68F100FA1F72D
+:10676000FC02C6408D83FC6483DE9E2A6B1C2E5E79
+:10677000977E1FA76F5DB08D07E559A932068B6222
+:106780008D04DF4A015FA67ED6887895517666D063
+:10679000934DB25827C57E5440C0FA88C6E8A1A6DA
+:1067A000E83144C8DD967AEE874180C7E70C3FC7E1
+:1067B00009FC7B6A3C8E379549DFC7F83836F88D7F
+:1067C000F62ED13E131C2E7B7F67593F934CFDD88C
+:1067D000E0CC049F7D7F0CDEB6F693597FD9DA9D1D
+:1067E0001F1C1FFAB503133FA99C672B0FB3D52FAE
+:1067F000B37DBFDAF6BDDA56BECE567FAAADFC0534
+:106800005BFD39B6F2576DF517DABE2FB57D5F69BE
+:106810002BFF576BFDAABB3E197DFF3FA39331AF02
+:10682000FAD345B7ECEFDAE75519244624D8736F4D
+:10683000EE4B8BF1D3BFC892728EFB243C8E058940
+:106840007111933DFE7B357A06D7B1BD1F6959A8FA
+:10685000F7F7C75FF6A33E32DE9F97DEF05F156263
+:106860007AC19558C1E33E719A3759A09C49562286
+:1068700097248A9779D44544724F397B6FD26F6ED3
+:1068800088109F5D25D6F710E7F3B01C7D7AD65FA0
+:106890006C9B8BECC15811E8A3315E94CFFBA7FA37
+:1068A000652978AB15AE9F8291782DCEE1610D5DA3
+:1068B00027F069A753705AECDA1730DEF008F7CBEF
+:1068C000F7CFB0FAD5B728DC0FB94DB96CBFE0D51A
+:1068D000F172AAFFFD0FAAE13656653F02C1CAB1A7
+:1068E000073D3AC63746605C8E6F1A505C6E38883A
+:1068F0003F117F2BC17FB376C3D55314670B350689
+:106900004EA2CE9BA354D0788F4B3D57E1788EECAE
+:10691000F3D7F2FDBCBF7C4CF17741AFE0C649C96B
+:1069200018A3176C758547139DC34467B702EDEE36
+:106930006A14134EDFD5ECB578AFF8F2D06D12FCC7
+:1069400040FD3B0AF7B575E0FE6482CA3E48523905
+:1069500047D8B9639452EE17083F9379F612FA5F5D
+:10696000C12F32BF3CCDFA315BAA1DA314A4E29320
+:106970005288C721A54D2FFC59C278572584F8FEAF
+:10698000948807AE97A58F311E1E18DCFE4EF06B63
+:1069900056BE821285D92679FE5A1F3F39BD46055B
+:1069A00039FEC1ADAE16F46BF6CFB2CA81515F5657
+:1069B0002E3B5EB17DDCA84F4F0E729551044F7F88
+:1069C00039B83580FB07528CD12D7BF074CB91B553
+:1069D000AF2A13114FA0F22149BB5529489515D074
+:1069E000E69BBFBF2A4716E0F7D854A86C5153FD69
+:1069F000B0F78B32BC5F92EE7DA961B79EE5EB7874
+:106A0000B1B0AF86B6C7C92E2D6ACACB32DB59C525
+:106A1000625DD8D3B4D08BF86E6F48AF078DE74670
+:106A2000E1F765AAA74A5D11D42B3056810369ECC2
+:106A3000F26751BE4DFA54ADB2DA5BD317C56AB1F5
+:106A4000BDBFCE01B86FC2D679B2EF8A842E7B78F3
+:106A50004A4CC2BC97F872083FC4F0F22F2AF3A642
+:106A6000B3931ED6B6D3FB1DF5876791DFC2EC3A10
+:106A700099E2E25DEBB13CA4C6011BD2EC173C21CC
+:106A8000F0DB5CCFE964FF5EE18268BA79F8AC22A2
+:106A9000F61994980485A9FD92274E147DA192C100
+:106AA0005B1C7684BDA1149CA57D765382E855516C
+:106AB000AD0430DF80297E8BBDB9A3BD7AC71D68C8
+:106AC000B7B3F768B7EFBC3E300CD78D3DB515B303
+:106AD0001A517FDFE980D1A1141C633AADF43CD197
+:106AE000373FADE3B27E6BC97FAA67E44A43872B89
+:106AF000A547A71837939CD8D755BB1C5CCEFA7016
+:106B0000937CE5F8FD00E7E144921F8AD30CAD6762
+:106B10007E5C556A1E197E8A5DCE02750B49CEB623
+:106B2000D7977911CFDEBA6AC9C5EA6DC19A69FCF7
+:106B30007163BC4CF05438A3DE00CDC385523ABA21
+:106B40001546D3C7CF35A7883F2B5109DB67AA3736
+:106B5000C229E441CCAB4231AF82535AE6D0BCD813
+:106B6000A5C0438C5E0FD755B78D26FA3948EEA6DF
+:106B70006B5CCF164EE0FB993E46AF67D9BAF7483B
+:106B8000038413ECFD23135C96FD9942411FBB3C2B
+:106B90003E32807E01B3FFC5E45F71AA7CFFB61C64
+:106BA000CAD19E7AB8EED2ED074BDF608343D39112
+:106BB000BF35D503C44DDA2E779D9A773DCA63CD94
+:106BC00020F3276CFA029EBB6BFD68C607DF2EA67A
+:106BD0002F201D7D5C167F7C207AD8E93F0EE99935
+:106BE000FDE9D1D3FE7D8853C40107498F27EBCB44
+:106BF000B6968732D7B7E363B4DB28E6DBE7A14775
+:106C0000C6F9AF4180E24B53214CCFE910A167B7E1
+:106C100012FD9293D59F092D5436E2508D0ADF97CD
+:106C2000802A3EAEB1BFAD4C03B293C78C077D2F17
+:106C3000EAE72973C4A6AFA29DF3A0D1C6E048E35A
+:106C400057013C447817DBD663234E31B4295E5F8D
+:106C5000CDFA2DAE77501CA3B8E6B0D7BC2EFBC53D
+:106C6000FC31FADBC9BEE3FABCB36970FC32EA3D21
+:106C7000A12429AFEB899A87DA70B951F2DE0EA60A
+:106C80006B6FA7EB968FBABC9134F0EC5C7494F206
+:106C9000B776D65C3A8E3290DC8C91D3DBB39F779B
+:106CA0007B896E3B733DB7F0E49C5596FC0390D511
+:106CB00052F3B83B3F82DCC8A5F489669D2F5B9CEC
+:106CC000221FC4073E94FF4CF4309E9F361D9E9CAD
+:106CD000DAB23492A67D859BDB136B722186F92292
+:106CE0004FBEAEE898DFC00496E471D22D211DEDB1
+:106CF00097355EAE979FAC05FA3E29577C7F2C44B2
+:106D0000F954C59D1073B1F5ACF8B5458FE4B27A6E
+:106D10009B16310FB234F57E53F86407EE133FF340
+:106D20008A2380F6D1246FC2136678D5887570E700
+:106D3000A29394771CDBA58447937E97409A44DE08
+:106D4000BC25AE79DCA910BC3BC30F7B716F6E47CD
+:106D50002849FD7C63F2494F88E1B7A9A4DB837819
+:106D60006EAE7998D6CBC38BCABE5C4164B5E6974C
+:106D7000CC94A7746B98BFBB88EF5BE426BB3D98AF
+:106D80009FE46F50E046069F5FE5F86E5A033AAE07
+:106D900053D5228F4482D9E41717D9F2B80A6D79F6
+:106DA0002681F0CC77709F9FF6FF1109B9E991B168
+:106DB000184F6C7688F4538DE6A94FE0E70B6B54BF
+:106DC0007FA67CCC8B790B3BDA9500AE7F015BBF55
+:106DD000763C02103DA149D40F8DB3E351BE4E065F
+:106DE000265266316B2AE00E30B887B021DBAD70D9
+:106DF0001B74B58FE3B395DF36E4B91846A31E3292
+:106E0000E2CE06FC76B9CD9FA41F7999E1BBF315BC
+:106E100095D6EB9D352F7FAD19D7F94A37E5717DB2
+:106E2000E1E2C1A6EFB3E72F3E385A8ECF2F16ED21
+:106E30009FD08C74107912463CAF107B26FB55E82E
+:106E40003563BCAA3DEDCE7C7A45F9159B4FBEDE7D
+:106E50008871E7A22620FBB748E1F2E96B77E86D7D
+:106E60000CFEFCEBE2240FC50D09025A6DE892629C
+:106E7000267B5E15F69CAF292AE13EFE8D0D712F13
+:106E8000E68BF844FCD737214E76D20CF90D4F52E1
+:106E90004DF1CFC87F37E69F9D3F158B78DE497156
+:106EA000BB1246B08B9B5A1C6487D7F07CEF8ACE0E
+:106EB0002E89FB7F3C9F9E87D4D933D2C8F30977B4
+:106EC000713BDDC8FFF63759F917E8CB9F8FD2BE6B
+:106ED0006B69A7ED7BA4EE2D2E87567E96B9043FF5
+:106EE0002B44FEA0CD4FDBDC24F6E9548F7E29BB7A
+:106EF000F6159187F32AE23FA6FFF79B33E8DF9B65
+:106F0000DC7C9F5F767477901F779D83FC383B1CF9
+:106F10005B9AB8DEDBEF7258ECF82B1DFF36A1FF51
+:106F20006547F26F327E531FFE7F9BF1EFFF1B8F91
+:106F3000BFE16F4CFF1D7F63FC0FFE07E33FAF52C5
+:106F4000B2F8697B5D1EEAEF87EEBEBC0D8BFE9644
+:106F50001DE9FDED332E87258FD8C84B9CD6A02D7B
+:106F600070A1BE0CF3731EF6FE66C82F75A01EDC62
+:106F700021F2B1991ED564CC779A6C9CD3E0FAAF1C
+:106F80004EE8BF3AA1FF0E67D0ABD5355CBF33FBEF
+:106F9000420F95E292119F5581EBF72985F28B0FF5
+:106FA000035B6650AF85DC69F3B10B05DC767D5A77
+:106FB00028F469F54BB6F7428FDAD7F9D2BEF82933
+:106FC00050FCF4BFBB447EA94DAF1A74D851C3ED39
+:106FD000E5FC39E9EDC14D363EAA135A280FC1CE62
+:106FE0008F332EEE5F1BFC58E0D17EED2AC8CCEF2C
+:106FF000A4E0F70D82DFBF7405E869E48D64E277F1
+:107000008D9B8FF359DFD9601B6213A9253EC8827F
+:107010004F326CEAA6F82F7C03CCFEE5968F981DC4
+:1070200082EBBFAA52FCECB3F9E03092ED3F32F6AE
+:10703000E9D89FB39BC751E57C97CDDFB2DBC11E7A
+:10704000CA8FDBA9F1F3563B6BF6EE5C81EBD32BD9
+:107050007C9F79676EE74B78F40DE2E31584C3B04B
+:107060001B41C467D1A4E0F928F6FD27ABDDBFF3CF
+:10707000A3AE04DA5F815229CC3C2BE8083D9C9FEB
+:10708000F63C9ECDDE57DD3E8BBF0B370ECE6E5FDE
+:107090002DF8CDFCC502B7697EAFF6CD1CCFF3A2AB
+:1070A000A607709F47D2663A309E9EA91F8CF49E19
+:1070B00033ED3B352ADA70EC4F42FFB132E53F0247
+:1070C00094F0F8BC81FF60CF0D34DDC5F7BF055DDE
+:1070D000F3AFEBFAABF891469CD7A8A72A094877FB
+:1070E0003EC81EB7BBD1A94D46FC060BFF6E143837
+:1070F000F6FCE72AB92E5DFC2029F4AB1A79EAC523
+:107100009B59D50973251EDF67669B795F6D53BE5A
+:1071100052972EDEF533314F7E894139D2EB09C8C3
+:107120009328AF04102F633EDAC7BF568C7BED1552
+:107130008EFF8A98D7D78A790D10A6FD984CE3D692
+:107140000ABD613C3FE9B8498177AD4BC4350618AB
+:1071500077B6C073F615E27B5E8C3B7B90F82E1001
+:10716000E32DB8C2713F14E32E18E4B8770BFADEB2
+:107170007D8574563C92E86770746E13E3B55DE1EB
+:10718000B801316EDB20C7DD26E8BBED0AE95C22E1
+:10719000C6DD66A373A6F9BBF70AC7ABF4F0F9B373
+:1071A0005FCC5FBB5E33C6578B1C116CBF3368ED81
+:1071B000E78B6E3EBEF184C4C7E4BF168B7DDDC98C
+:1071C0002BEE5DA8A519D7A86F5F8F338DF335110E
+:1071D000AF319EC6387EB11F3AF93A364E1AFA18C8
+:1071E000F5AF75713D98A9FFA5029EA597898751B6
+:1071F000BF16FB9F98B9FFFB041CF7D9E01FA87FBF
+:10720000A3FEEC01E0EF1070745C26FC46FD050364
+:10721000F4FF2D01C7B72E137EA3FEDD03D0E709CF
+:1072200001C7139709BF51BF6D80FE9F16703C7D4B
+:1072300099F01BF5B70D409FE7041CCF5D26FC4677
+:10724000FDFD7DF3DD3AFF54E33C50182A31DF7831
+:10725000046485E97E8370F204FA01EA2A7EBF01A4
+:1072600074D9CF4199CE4FB1297EE2BE8A18D6DFBC
+:107270007D178FFBEDBE16C88FD85D20F295455C5B
+:107280004B15F6E0EE6B791C647790E7EF832D5E8B
+:10729000B49BF93BB4EF5BC2F399D5AA3899983403
+:1072A0005CA13011439857C3CF5319F69E71AE6A53
+:1072B000B58853EDD680E254BBAB7879E774D01D26
+:1072C000A5A6F3569509CA4345C316E3B1A9F362CF
+:1072D0001AACAA36E563AC4A50BE8122F246184188
+:1072E000C09297613BA765DCA37073589B816AAE1F
+:1072F0007402DFCF2B8D58FD87263CBCC5EAFF56B4
+:10730000E8C900D64BA3670E7914CE3F91B7395721
+:10731000E06FD0AD5AF073CBEC0FBAA7313C5F9C55
+:10732000E2C44C1678F194A0E31459E7FBE7E0348B
+:10733000EBED3E39CFE00FAA9D2D27BD8C3E37BF28
+:10734000046164A36F97B6264471B58F48FE28AEDA
+:10735000C6C6BD79575C41F99BD5199A86F1C0B96B
+:107360002F8556AB987FDD09610DC9FBD1D7A99F49
+:10737000BC7608EB9C556D01B2736DF139E3BCAF7F
+:1073800088CF61B8DAEC5FCE127857B707D6E0D66F
+:107390005DF574B7C57E9D25FCCC2F696EEB394930
+:1073A00071EE7196CDCFECF458E3756A676406C64A
+:1073B000BFE5B9A7353CF73C26220586B2CFB745D5
+:1073C000B629189F9CB5AB85E7F567B80F23E7B1E1
+:1073D000393EB3FD3E46C8F32F775DDA5E37E20CE7
+:1073E00046DCE114E619BBD14F0F0ABE70B932E496
+:1073F000236FAE6491934E0FD7239D1E1EC7FF4F80
+:1074000039F9EBCAC96F3CD6F843277E63F3B12242
+:107410009C7E9FBED1E3FACFF9FA29F0C1EF4DCFA0
+:107420000768CAB1E4131B795576BA19F7C618650F
+:107430000FA43F8F57E215EBACDDAF7F235A8B785B
+:1074400019711A80FB6DFB9B53C2978A4BC8C6BD4E
+:10745000038E3764C4A7D22BF48F020AF56FC3835F
+:10746000E67D61EA3E1D7B7F6BC4791E032F677941
+:1074700044C37B56D818B4DF8779EB87AB707D0C9B
+:1074800058F0D6BC7CBDD950C9E56D43A5A2679321
+:10749000BC45ADF71695EFF5A4B32B8C2798EFAB51
+:1074A00028EB0FAFAB3C1A33C3E312F0D8FB999330
+:1074B000119E464BFCEB72E1715F05D08D72AB30D3
+:1074C0002926F9FDBAA53F47A54EE7FA33F58367AC
+:1074D00064082F1B5F328DEF29B19E5770E5675905
+:1074E000E45D51F36CF78AD8E4AB2F2E34B8F1EC9D
+:1074F000E718DBC5F9147B7BAF1287701ABA7B43A0
+:10750000F67C0C9DF8603F5FE30CD8E0B6F5BF0950
+:10751000DFA5C9F730EE195A27D6B5F58A4EF656CB
+:107520008C8189F99E6B845C2A019DEE67FAA657CF
+:107530004A8B3F84D3AFB74A797AF83D2556BABB18
+:10754000F2F3AC7C50D29FE7586FCCFBC07ECD7C71
+:10755000BF56FF797E2C7CA9F5BCEF5E2DE937F292
+:10756000C70CA5035EDB3D1683E4AFF2E11080217A
+:10757000A632D3AB18AF657384F279EDF54F1BF4E7
+:107580007B632FC16FE8E9EC5D465EED27C3439254
+:1075900040EC935BDB679C8742CFC942AE9F1F00E4
+:1075A000FF4CFCCD2A77D8E6CBE0F8EBC5798FEB22
+:1075B0009EA2894BB0ACF33ED37810E0F85EEEBCEF
+:1075C000FFA4700EA98B02EA3357300A51B6CE17CA
+:1075D00005E3B44FAE4A3D31F4C7D89C0A219F77EA
+:1075E0000E09F1F3E3A67A53593B67A923E6C43C9D
+:1075F00010089FC0FAB12074617D8CC7ECAD4AD5EC
+:10760000532588A0BCAB054A04DF1BFDE54CB1F651
+:10761000C7CC04D97C1ECBC817205787E1EF9CCC80
+:10762000FC53D6DEC5ECD03DE9F44916B743B39F11
+:10763000F3D279435F44D551248B26E894175CD468
+:107640000861F4E72A3ABB21CA3AFD26C23111BFCC
+:10765000C7E9DE85A25D71DAB7CF77F373EC454DEC
+:10766000716981699CCA2C2EDF53E778689DF87A8E
+:107670002DBFDFA23BB8305E8BE3D5F07D2F5FBE20
+:1076800002C3183D7CAFB9B9FF392109E67B23DE7F
+:107690006E85EA45A301DE6DF5D0F37C6B809E819B
+:1076A0008FFE279DE75B33715208F3472FFA1A4785
+:1076B000E2BAF17E6B90BE6F7E301CC27C22F9E490
+:1076C000EB749F444ADE6332D430BA4D486AC83FF7
+:1076D00013FE7BBDA67DFE3EBC18BE0BD8381B2515
+:1076E000C7ED381E9617929C7A649729FFC325FC34
+:1076F00046E71A883C5585F797E8D2DD55A6F75E30
+:1077000066B7E1FA3A31407C4FD1536F13F4BE169D
+:10771000FDDDA297045DE7D45C72DF64536BA27B4E
+:10772000FAE85459CD70EE6DB673EA0D591837C2A8
+:10773000439F6CBC69732A8722BD1E755ACF931B69
+:107740004F39303E5C8E7563450E9A87E27E959583
+:10775000578586E69AFA9F2DE4523EF923A26F766A
+:1077600015CF0F617FF545A6FCFF926823BFC7AF19
+:10777000859F9331F62147DE9A6CC32D8991ABAC7E
+:10778000E767668AFB504AD73828FFB57432E9505C
+:10779000286D03CAB3DA2787AB51BE1F835772F136
+:1077A000007B09836F389BAAA5316B3FFB16D7BFBF
+:1077B000807100E37E95D5EDBCBF11A1F0A910C684
+:1077C0004FAA1C642F8F84B007FB1FA93A00CF1764
+:1077D0008D02533FAC3CBCC5DAAF1DDE529FC38166
+:1077E000F10E039E1170C4A3E553FFA0B3F625CCA0
+:1077F000CD2B4E039F7D9C5146BDB1D5D509483355
+:107800002EF4B4E1BE50BFF107E8B7354BD8E13EE6
+:10781000F0A33EDF2571FC632FCAE103C8D7BB0F7D
+:1078200052BCA6646527ADEB9D59DCBE5BCBEC0179
+:10783000D589760A7B8ECE2C877280112E87D68FC3
+:10784000B4F2F76456EDD62C8C87654DDD8A7298BC
+:10785000A584BE82FCC83AE504DCC7CCD2E234FF82
+:10786000A09CDB191BABCA7270BE65B5B8D2FA6BAF
+:10787000ED594E826F5796A4605E28932DC24B69D6
+:107880000A7D6B262B7617688FE3387F2E88D2D33C
+:10789000781F5CD81042F99CB6A48AE25FBD9D12A5
+:1078A000C5BFDE927417A66A2F9BDB32EE46468F69
+:1078B000D9B9D127B0DD1239B1D6C9E0597E6B4BA9
+:1078C00005D2A71EF3FD0A70B818F7074BCE841532
+:1078D0003C1756A2249C4CBE3D8193AFF167AC1679
+:1078E000E5DD832761183FFDE5DA3BE837F9C43968
+:1078F00024197A629817E89F0270C6C437F4E9CC5D
+:1079000065DCD3359733D17FA0E722D6F6CC685C0F
+:10791000E5C39A4476814EF47305C2E3104E39787C
+:10792000AAB0DCB4CEB9057EEE690BC5FD489AF06D
+:107930006FC260F66FDD022FD4E1674CED9D416BA5
+:10794000590EFC75F130EC6EE9A7FF7E0EF9B8FA1E
+:107950006927C53DA73DED4CDCC0CACBF748B4CE86
+:10796000388E73BDFEFE7E89E67DC2E7223DF05E65
+:10797000C043E56677F796CFB172CFD332EC25B22C
+:1079800034D07D52E78CF5F4282F2F160ED2F23D1D
+:1079900027E6637F8D47DD80EBC4F21F2DB9E973C5
+:1079A000ACBC84C93156597EA0CD358C95EFD2A59B
+:1079B0002E2C5F980A2467B13C978E792D17FCDD39
+:1079C0008537ABB48E41680CEE6F7717CE65F2B891
+:1079D000547F6A26B65B7A48C2482AC3E3C00B4587
+:1079E0000CAEE5DF91687D5C76309BDFBD22E877E9
+:1079F0008EA17203FBBE92E189FA7009C46722BFAF
+:107A0000961FD8E632AF73EFB65652EA87515EFE44
+:107A10001D360E6BB7E27B5218515C81F90EB85ED1
+:107A2000FEC8DBB04F45FCDA5C153EC46B9D0BEB2A
+:107A30002DD1173CE30D217C7B5C33D9F7A5BBF638
+:107A4000B8165721DDE0765C57971DFC0CBFB3C01C
+:107A500080AB53267F6165AE672FDD6BAADAEE47F8
+:107A6000E9830B2C702D157A83F97D2EF379B76796
+:107A7000B273494E971D942DE318FC8F9D067E1E10
+:107A8000ED273E3A8F66F0CF58AF0CFEAD342EFA9C
+:107A9000537A26A583670BF283C11367FE0D3E1F41
+:107AA0006E0DD2F3D1D610F1693BD2710CCF4BC120
+:107AB000F76CDED6E23D687E0D2F0403C8ABD76AB3
+:107AC000310F332FC2CB85B746A5D025EC74E3B96F
+:107AD000DD195D8046CE94EC6FCF50983FB6DD1532
+:107AE000BD1B43D60165EF8CE96CCD6BCA8E4CCAC9
+:107AF00036EDFBAD15F7275D931D22FCD716B9882F
+:107B0000DEDB6F9BB44FC49F689DDC7EDBE22730D9
+:107B10003ECEDA7F3E1BFD0BB1FF97A97DE1FC1A3B
+:107B20004BFBC2F98D46FB99D4DE73E9F6DBE75FC8
+:107B3000671D7FFE52A3FD4D04BF7A69F80B6F9F4E
+:107B4000621DFFF6266ADFECE6FCEDC9F550BE7556
+:107B5000BB379C407D4C17A94DC07CF28ABD58CFE5
+:107B6000587798E6D7307F5B3D945BBD01CC72348B
+:107B7000753EC28179596639CAA9C9B2CCAB5C2DB0
+:107B8000CF521E5237CC52BF205266F93EB4E16A42
+:107B90009B5CAA747E91CA08141AE60C4ED7301763
+:107BA000E9A3DA61DC0EBEF7B897CAF75EC7F1BB8E
+:107BB00077984AF3186146BFFC5E57F41AF3BDADDF
+:107BC0000C2F093773EE54A3F7211EA9F72107BE26
+:107BD000CF12F94E596E207DB7AE74D2BE98899EF1
+:107BE0001DC3993CB0727BB68BD35DF061DDF0C5EF
+:107BF00041B3BDBE76B8AB01FD0D7C7F878AE345FE
+:107C0000D6E278CDAE9E0AB43BECE3B8CB6A2CE367
+:107C1000784634D238DBB2793CD518C73DA2D1368C
+:107C20008EA761AF782FC67904E52CD338EBCAAEA6
+:107C3000B3E23362298DB3DB36CEBA114B6DE36408
+:107C4000717CD87B318E7EA971DCA3A658F119D93D
+:107C500044E3FC931D9F914DB671541A07DFE3383E
+:107C6000CCF00DE17D592E77CF62E2FF4FBD64E786
+:107C7000B8DCD127C9CEF9B597EC1C564BC37A5066
+:107C8000C9FDDB7BB2F3F8BD5F598CFFAA99CF31F8
+:107C900091771023BFF84E0122E80C22A6DF560888
+:107CA000195C7468F688367C1E9D165C80FEE8A31D
+:107CB0003E8AE3BD7F749AEB8E34FAE8CEB8F35C6B
+:107CC000D224CF7D7A55C46383D97C1FD2289F13D9
+:107CD000F19F33182762CFB79C40FED059112F4A2D
+:107CE000C1DB46EDCE897DBD73BBF83A7571DB69AA
+:107CF00027BF37155EA96270CF1368DC19B7DE9312
+:107D0000D92CF8D1F323373F07045A31DD8FD73907
+:107D1000C4122FFCCDF17F7881E7DD4131DEF7FB26
+:107D2000D58EA79EC76AAF4A0B86AF64F8361CD9BA
+:107D3000E62C66E5F79DC9F961D5D44F8393CEDF74
+:107D40001B7EC82D51A7C57EFE5AA3B57C9BCD9E38
+:107D50007E23BBCCD89FE5E3867427F26B1EEEB181
+:107D60003216DE864F4ABE0B10BFE607785B039ED5
+:107D7000E6FB9D90A0F52E594071CE5801C569A231
+:107D8000C6BA65836FBED3A345183FE7DF27131D2F
+:107D9000EDF0268F676B0EE6E7243BFF9713CFF1DC
+:107DA0000C04FFEDABACDF21E6B4DC4760C8C15783
+:107DB0001A6AF79D35C9C72DD159FBCE5AE834DB75
+:107DC00052BEADE5164BFDDB572DB07C5F10BBCB33
+:107DD000F2FD8E8EBB2DE53BE3F759EA2FE96CB33C
+:107DE0007CBF4B5F6FF9BEECE0364B7979D70E4B19
+:107DF000FDE6A37B2CDF1DC7AFFA12F981BF94E922
+:107E0000BCF31FD5735BD07EFB6340A1FD9CB7C55F
+:107E1000FEDDBBE23EA015287B9371FE8CF7A0DF50
+:107E2000D09CC5E633B325C6A9056B3BA6A01E01B1
+:107E3000BA5AA35A2D5E1B63CEEE64713E51EE74A6
+:107E40004162086EAFA4E2B03D72EABB9264DFC744
+:107E500067FE2E772A69BF2B49256DBF17A49E0A9E
+:107E6000B41F63AFBBD39E034FCD4B28864BDC2F93
+:107E700079DE018D66FF6D9ECAE3432F644F9DA797
+:107E800016D071699AEF4D878BA6A2DFD0E44A54D1
+:107E9000A4DBB7E91BAF4BA27B03E7A97CBEDCA543
+:107EA000175BE269CB0E8EB2CCFBD7B2A237ABAC7C
+:107EB000DEF91332E959483C37E2CB63717C6D1E21
+:107EC000BE87A305B43EBEDAAAED3BCBFC80D75AF1
+:107ED000EBE8F9ABD6C8BEB3CC257CA3B581CABF4D
+:107EE0006D8DD233D9DA48CF33AD2DF4FD6CEB2A4A
+:107EF0002A9F6B8DD1F3EDD60E7ABEDB1AA7EFE782
+:107F00005B3BA9FC7EAB4E4F631E18F62E44843DAE
+:107F1000D9F78309BCDC2B70900B8D386698EE95F1
+:107F2000EA552F56A01DDDFB9A9BF26E33D1C92E68
+:107F30007799F9A7D17ABF58B7C6998DA7378BF330
+:107F4000C7EB803ACC91583FDA4571B4AC9F7E863E
+:107F5000EC71F65E017ECF7278769AFB3ED1FF46D9
+:107F60007E0DC427A3FEB96FFFDBA48555C89F32E1
+:107F70007EEFD773720BE7DBBEF097C70E4C3FB2B4
+:107F8000F98AFAD351FAE96F46607CEABD02839E12
+:107F9000DD2330B8A5A8911D2887BD47DC8457EFA5
+:107FA000B16C9E8F8241B541E4BF2E3BE8D5CDFA3E
+:107FB000617957AE6ED51745BA595FF49EDAE7C7B7
+:107FC00079BF3228EB67C7A37C68423EB8DC19FD55
+:107FD0002FEF2AD5554B3FD6726F5CAAA37B202189
+:107FE0009433F712F7A7AE0CBA689C770F8EA2FCF9
+:107FF00003E627EA6779BC53E7E30675B35C36AD61
+:10800000CAD6CF0E49C197A9DFBF367C0047E077BB
+:108010009ECCE771077A82F2AF2EBAE7ED98F32291
+:10802000AE3B6EF6BF8F295F48A1B2D16F73971C2C
+:1080300073E3795E3864198FB50B193EBAF9FE9C6B
+:10804000FE7CB7E683FF166589D66D7EBE3C8AE767
+:10805000CB597F1714B543BA2675BEBC59C8E57213
+:108060004FD21565AFDE3B32EA92F920EFB69E0A99
+:1080700028A3318F20EE4267A4B1EBAAE9A81FDF45
+:108080003BB2BA10E369CBE4DE7BD39D9BFD50E5A8
+:108090007136D09D3D49133E467C0680F5EB49C1C3
+:1080A0008F927ECE54B6EB6BE3E9F0F1B8FB8A43D6
+:1080B000A7677E8EC1BFE2E8072E84E3A81A75F891
+:1080C0004CF84BE27CFDD2836FBA10BFB79DB18AEA
+:1080D000FB2FA1A7FAC3A9062DFBA131E8C679BCE5
+:1080E00090FFF602CAD3577ECDA6E63BBF7002FED4
+:1080F0009E83B15F619C7B5804113FD26BE1916517
+:10810000141F7EE7992F0A7B2E3E09E5E33D70D4CC
+:10811000217EEFC1CBFEF126FA95FBB81F031DDCD3
+:108120008E31CE05327BD662D72CE9B49617C39C2C
+:1081300042D41B8B1F75822EE1FD9FA67B9818DE13
+:10814000F93E6EEF2E8196B568CF296EEE1F2C0C8E
+:108150008052CCF4E9F21F3E3609EDFECFF8F8BEAE
+:10816000A311C7B82B8FDB7B4BF37517EE27FCEE03
+:10817000C8F8799F43E973EB6B715D869CF4FB7FD4
+:10818000777458E11B087E3BBCC6B9F77EF1140139
+:10819000877C504A9B9F36D927E44EE891877C56CE
+:1081A0003B7F9DAD5CEF1371561964E4F37B014F87
+:1081B000CC9143DFE99C6DECB03BBC3A84F76A4557
+:1081C00022285FCC2E1807A67ABF57A3F4FEBCF472
+:1081D000D2623A67AE24C6513E9E07284FD125E4AD
+:1081E00041CEF28F836B304EDA424EFD6AAF7F2F65
+:1081F00096D7FAF839A8669CA7ACBFCDFE99A730F0
+:10820000AEEF8178422BC5FD6F6BFCDB1BB296B3E2
+:10821000713EA13EC117C88F3050BC28BBD25ACF87
+:1082200017B69697F6D129219BCF7DF83D6A027F3C
+:10823000AF026A94F366BB798587C30F78AF2AAB28
+:108240007F8FB0E757402846798B412E07F7CCE265
+:108250007913F7F842E118FB2E291A9D8F58874DA4
+:108260004DEB58F38712E826BDDEACF4B8502E9BD8
+:108270003F54E8FD6E35FA20D2D5051AD9B91E460D
+:1082800034DCBF56D43A8BDD0B25E27E405BFEC268
+:10829000265FC0E2EF197AC129F422D317EB7C05DF
+:1082A000A8077B66F27DF5A48BEFEFF07AAE54BDA4
+:1082B0004D0847A67ADE54BD6DE9EA2DFFE1779FB0
+:1082C00089B1F9BEF4FBDFF4E366DA3B4ABC10F394
+:1082D0001F9A0EACF1A31CBFADC4FC88F73B7AFA21
+:1082E000BCF79F097D87F94E785E7E85E0D3BBFFA2
+:1082F000B8F126A4FBC5034E3A6FDF7CD09D7033E6
+:1083000026AE38721797A783EE3779791DFDFE48A0
+:10831000F351EB7C5BFAE4370B43B4B9172B16F738
+:10832000B393FDBC62FFEF67A23DD20C3DA427ECE6
+:10833000ED70FC0FF368FD5A80E7FEEDDF8D7CAB3E
+:108340006621F7CD4736525E55F391599447D56C67
+:108350009BE78DC20F39EAB3FE6E83410FD0B95D42
+:10836000BCFA3BDF1AF72683E7FCFE5FF8254BFCDF
+:1083700088EB89DEAE3B1E7F369459BFBF2FFCFAD7
+:10838000543B9DDFFF7D94DBF1708C3F9B9C093F4C
+:10839000FA4D4D7B9C61A641A0E9BBFB9EF836CA15
+:1083A000F7EB6E8A372CFBEEF3AF5EC7CACB9E723B
+:1083B000E6D7733454CC0336F88267DC315FD7E0FC
+:1083C000C3D21F3CEF0A8DE5EF1FC84BF163D953B1
+:1083D000275C30B63FFDA6759D70F1F3E736BE749D
+:1083E000BD3913EDEED5DFF9930BE7D73BC7251861
+:1083F0005ADABF7DE39EE7C9AE433A111F059FFAE3
+:10840000F8D68F5F899B9E9D40F502B88E0DC4AF54
+:108410006FA3CC14905C7FEF59DC2FF8953B8C74E4
+:1084200068FCDED7FD88CF5B4A0B97EFC7D614E216
+:108430003E7AA3335618A0277FDFB8FB1B24774B67
+:108440004E7FA390E7416945FCF78C62451407DC39
+:108450007533E1B918A2247F8D8FC99487FE470533
+:10846000EA9E4A333F6EF0733DF6D65E375D7EF787
+:10847000162A5CF4175F96757EDE96E7257EC3D8D4
+:10848000F7C0FB1B59F98F1ECEAF02BFC3B8D7CAC6
+:108490006391DBFDEBBA914FEF0ED78662BC92D1B0
+:1084A0002126E826A11E924FCF18CAF90421659211
+:1084B00068C7F4E4347C8FF5BB9D9A779CA59D58E2
+:1084C000D7F8F8F788F119DC59689FBD55C8EC9DBD
+:1084D00034F82DF31BF39FD91F263933CD733EEFAC
+:1084E000F7AFE7F3DC98F7FAEC3AFCFEAFAFF079C0
+:1084F00084ED709D67702586D2F7137325D20B6EBD
+:1085000048A49BDFFB9D627E5BBF33AF9CEC5B436B
+:108510004E18FC0AAE5B2979E1FBBC8C0F64BF2DC1
+:108520007E94B537DBE7382ED573A5DE9BD6FB25C9
+:10853000421F5CE7B7FD8ECBAE8241DDFBD3E4D4B6
+:108540009FF836CE5F365F71FD69FAAE93F244FE56
+:1085500070E8B957BFCAE4FC0F5DC6BCB5EA53FB6F
+:10856000BC6D3C3C11D2CDDB3FA861483B6FD9FBD1
+:10857000B4F3564D923CFF47E953837E0BFDD63C46
+:1085800027433F66A2A35D3FFEC517227ADAF52393
+:10859000FB7B0526F5974343FE0CB95BFA4FCBE90D
+:1085A0007742FAE4D390BF3EF934E4CF8EAF957EA4
+:1085B000F6EF9F4143C58817B3A7F32188F9309E92
+:1085C000FA1399E2A917184C6B199F2F1C2AA5734F
+:1085D000C46BBCDC3FBF10E8F1E755D13D3854EE29
+:1085E0002970AD457D61BCEFF1F2F8F785488FDF6A
+:1085F0009C07F2E631D98FFB5D491DEAD2F9234C85
+:1086000023131C49C8F49DC78B2FA0FD87E3658DFC
+:10861000D0916F336475C42AF4F3E3FCBCFCA2B6BA
+:10862000AFF8711FFEC2B1515B517FDDF9A20CE2C0
+:10863000F71315CC37B943F0FF6D886D9FC2F0BCBE
+:10864000E318F72B166D4A2F2F4B45FDC5EA3D2E3B
+:10865000D44BCC2F38638E872F15BF4BD6B8CBF6B3
+:10866000FED81749AE96DAE42A2AFCC6EF1A7275CC
+:108670002D5C2BFC3687399F6D865CB515ED920B12
+:10868000A7781CB2F7984CFCE83D24F1FC278C0736
+:108690004F4679E87199F3D8CEA3FCA5B9DFA0EFD6
+:1086A000FBD3BF99743FABD2F4CCAFC7ED64CFF32B
+:1086B000CFBC5EF1632CFFF09F47FC1AFAD79F7680
+:1086C000FCCFB49F7DE1B89BE0B870FC6723EEC798
+:1086D000F2B36EBAAFE6C2436E9EFF79DC47F7D6BF
+:1086E0005E18CEF38556FFE44FE3E8BE3EBCC99D5D
+:1086F000F1ED353FF7C77A8FFDDB6F317FB8F79823
+:108700003B8478341FCFA6FDADE667BD14A7B9F052
+:10871000933F4D32E7335D293E2BC47D88177CD0D3
+:108720008079CA1772F9BE41F38F27EFC37344CB28
+:108730008F9C70E17ECCB49FFEFB38D43B170E7348
+:108740007BE27D677237EEB3FECE7FFB3A27C677BA
+:1087500071BD1E06D09AA3DF88F7E1F4A70BA7C36B
+:10876000054607C48BD1A511F565267AFCEFBF5BE2
+:108770007A7C301FC76F3AF6599A3729BA481A7F60
+:10878000EFD3F16813C39FBF3FFEA771681FFDA120
+:10879000AB8DD6F981F02ECAF97F0D6F293118BC47
+:1087A0006BFE6EF1E6F27FDC1FE2797FB679D05F77
+:1087B000CE7F782F95BFE70B13BC839CFF0D7FB74F
+:1087C000F87F42BE1F667CF70FCCF7FF92C3F78598
+:1087D000FFFEF01E88EF2F0ABEFB02988770E1278C
+:1087E000FF4EF17503FF81F0DEFE7F29DE863DB48A
+:1087F000C1118E9795621E76A23BC4E05C53392767
+:108800008E612959E45DDBE17A2187FB17B2C4E36D
+:1088100036309CC78F40F81B7DBF03A9F2F3558A01
+:10882000BA96DF47A684E97EBD0D572F0C536E071D
+:1088300054BF16C572C914FA7D5BBBDFD52E8126E5
+:1088400031FB4FB9FA0BA7D0FE77563A12EE71F40E
+:108850007C139FEB44DCCB197059FC0DD5E62778CF
+:1088600043D6EF6ED19F07AAE3F8FBDD1E5509E85A
+:108870006C7CB5364EF8606E67DCB46F88BF8F9D38
+:1088800030F9637BF107024DF6E4E5D2EF4F39DCB6
+:10889000FF94A5EA6ECC8B85AB1CFC7E73E0E78A67
+:1088A00037948475BA8F59F897297AAEED463A2AEB
+:1088B000C0FC438E1FF99520FC494574A1543A34FD
+:1088C000AFB59EF09706E40FE7C78826C19F9516BF
+:1088D0007E18F44FC3170B3F0CFA5E2E5FECFCB012
+:1088E000D3FDE7393C3E67E793251FA480FB2509AC
+:1088F0006620FFECD03E8A8BBCF78F6FDE84F59745
+:10890000FD5806FCDDC4F70FF92081F357D15DE86F
+:10891000672D3D22535CF8FF002820961900800047
+:10892000000000001F8B080000000000000BED7D20
+:108930007B7C54D5B5F03E73CE4C6692C964F29AF6
+:10894000CCE4C524811834E0244040419D104010FF
+:10895000EE754011B451470810CC13A4BDB4D51F17
+:1089600003C1343C6C43E5A5453A202AAD5803A623
+:108970005E50D4411E62AB6DB4DC5BB46883A280F0
+:10898000F24869F5C3FB79CBB7D6DA7B67CE994C51
+:1089900040FBF577BF7FBEFC73B2CFD967EFB5D789
+:1089A0007BADBDCE9E4B97E0EF26C62E892B632D67
+:1089B0008C653256F77C3263198CDDBF2B213CA5C8
+:1089C00000AE2F7E3C940D61ECDCB29E4339703FCB
+:1089D000F44BC5F714760F750FBD0DEEDFAFB17B0D
+:1089E00003A5D171E435CD69626C046367F624CDCB
+:1089F0000CDB1953B6EFBB87C6ED98614E50A2FD54
+:108A00006C4E33CD0BFDFCF83CF40B253C48E93BA8
+:108A10001E634BF978BF50387CBBCD611BC2B77D5C
+:108A20008B250870346DFF8BC50F70543DFF9CA3E0
+:108A30001BE66BDAADB24809A3BF4B0C9FAB918428
+:108A4000A1743D8E57C6FC76A582B146FCD70BD7E4
+:108A5000CE8629CC01D78E557F511DF8BEF9A36E65
+:108A60006BF4FDBAE75F793104A8A97BE119871798
+:108A7000AE9F753DE560A534DE7D9614C634BB66B9
+:108A8000E88FE35E4CEB3B0ECCCB980BEEF35BAC8C
+:108A9000A963059FAFF35F4E32848FC138126E58C1
+:108AA000DF67F88F87B151CEE48C4FAF81FF47B2BB
+:108AB000919754B86E4F67ECBABE788AE22BC4E93E
+:108AC000F9DC179B43809F33BB3EDF8CF0D7FFFD63
+:108AD000AF9B7F08F863AFDA9C4FC1BA9B7EF91F4A
+:108AE0000EA4AF7C6F9A53A1F7CEE5B19007FA9D23
+:108AF0007B2F211C825BE75E3999EF85F59EDBF9C0
+:108B000095CB0BFD17BD323E0BD7BFE8D75559CCDF
+:108B1000DE3F1CE79630164ED0C315263A7A77C34F
+:108B2000A059D0DC2BAE31F4D8DFB93F1FE13C7B3C
+:108B300034C1978078827B8BCB913E40A7A1BCFD4E
+:108B400020E0B771C78FFEA20E8D87E7508EC98DCA
+:108B500074FD7802C2C9582487B911BF3DAD4E7B60
+:108B6000DFFEBDF43A02F4BCF61BD06DC70A3E6FBF
+:108B700007D0CDD1976E67F11FA04F13D22D294A90
+:108B8000B72F58F0E79E226877A6135DE3E12BF23A
+:108B90000DF055ABF0F16F70FA7FE044F9D995D440
+:108BA0004BAF2948AFE7BEC86740EF53E69E7BD87E
+:108BB00070C67A5E49706E85FBF7BFF24792937379
+:108BC000BF7EC78274843FBB02EB3AC77AFFBA709C
+:108BD0009D8D8A58E7B6E44882238AF7C6F0D48987
+:108BE0005E07DD3F4EF7C39C7F117F39489FF0BE83
+:108BF000DB9538F4E87016D23A583893D6DDB0EDEC
+:108C00004F16E41B4927A48F320AE9757C02DE97D0
+:108C10007492EB8E1DCF897818A9A3DB362E877D41
+:108C2000E9DA636145F1E805F0E27B082FB4CF6D26
+:108C300049D094147E3F17D671CECC6676201C6145
+:108C4000E58FF1E8CBD8325ACFB3B17229D6772568
+:108C5000B9BC12DCFF285E9E703A697C899F335F45
+:108C6000C7D7CF8750CE01FEDDF6E041E41FC6AC8A
+:108C7000E11330CEBD4C61294551BC4978CF688C99
+:108C8000F4EE995FAAE110ACBFB5633FE9D958F99A
+:108C90008675F93BE2CCF747315FE3EE7D43510F38
+:108CA0009D797D0FF15FE38EE396108C7368FB0B6B
+:108CB00096EED228BFA3FE0EEBF4F7995FED1B4AA8
+:108CC000FA16C78FA36F4E88F19BF61AC76FDAF1B9
+:108CD00017C3F875A10E8BD37EE5793ED3FC3370B4
+:108CE000BD9F759919EABFCF3AD489E138F3BE29FF
+:108CF000EC97C453EB3B16B263C3DF4D0C27009EC9
+:108D000016BD33F14F291978B57801B5AC7329E751
+:108D1000ABCE87FC394897CE77EE52D19EBC88788F
+:108D2000BC2A3A6EC591E6AA6490DB8A6381E1C8E9
+:108D300056B1FA60E45193016E98270BF5F372185F
+:108D4000C70BE330CDE70EC0B8AA63C244844775B1
+:108D50009A9CB6B876958F67B6075810E03283DDD7
+:108D6000F6EAF8C93DCD3194A5E0F23C26D40B0BD0
+:108D700081BD503FBB2DAC4403F89829D1F7148C2A
+:108D8000BB70B0BFEC20B417CE71FB42F0DC731B9C
+:108D90007FEFACD31E325D8BEDFC30CA51D24595CE
+:108DA0007941F59D51DE9ACB40252409BECAE94898
+:108DB000223B93A4793754433BA956F30146D92764
+:108DC000F6605E6A26BE67A1F73CA98AF629AEDB8B
+:108DD000C11C286F727CD94F8ECBB4C8505C3FB396
+:108DE000328D815DC9651C6E55ACA7887529C8DFB9
+:108DF0002D531D5BB1BD29B996EC7F3EEBD9E7073A
+:108E0000BA3DE9987018F518FC6BC27E79CD46FB27
+:108E10003E60B1B15D10D262E4D76B0A00FF15B5B8
+:108E200019EF6754552E18E063EC9ED4CE891AE8EA
+:108E3000EF8C19953B7300A79357BECBDBCF5496AD
+:108E400079A0FD1F6B1A2669A047327E5F59960FE5
+:108E5000ED0B69DF9F44CFEB0049D783EA5F3374A2
+:108E600052A8342AB79900668A4AF27C23E2E16C60
+:108E7000E04C2B3E6D98FEA5051EE15F00F190379A
+:108E80008AE321D77E6C2783FE034CDD4B912F7F35
+:108E9000FECAFF4AC57E5EE6A4F53AD972E7A75638
+:108EA0005C3C1B7569D8E5F499C63E957CA846E5FF
+:108EB00020C515BC3515F8AA7556C98609A86BEBEF
+:108EC0007DC45F30B393ECA1ECEFCC20FAD408FA68
+:108ED000209C56E0B339BC0BAB65ED420F8D73E2BD
+:108EE0003C4AA85EBD74CDB7876796E49B64968CB8
+:108EF000F7B57A2FC1D595E99F83F8FA2A334857F9
+:108F000079DF3D6BA63708F8BD3135300FD7E199D1
+:108F10007B311FE19F92CA68BCAA79763FDAD50BF4
+:108F20007B41FDC5912B79DDBA84F9B441FD3F9FAA
+:108F30009616FC2E8E5FF89A77D76118EFDA1A8BA7
+:108F4000CF06535CBB78B84F4B677C41E87708BAD3
+:108F5000B991962877DF636194BBF3098ADF0FED3F
+:108F6000F30F38492FE7D64C398CF6EC7C52414749
+:108F700004EFFFD04BF2081E8082F290B7372562D3
+:108F800073103F7F19C3CF5F1AF9D738EFF94BDE63
+:108F9000DDDD349E538C070E113CCF13743AAF7253
+:108FA000BFFCFC122FC101EEE33EB4B7DF74BEB5C7
+:108FB000A9C24F12F479C8E65F87F400FC6FD0E3D2
+:108FC000FF67FDD37133F6033AD235968E73ADCD7C
+:108FD000F9A817EE0F744C008DCD4ECEFD5E053214
+:108FE000F7D4D4E036EC5F3FB3EB9099A0692E46FE
+:108FF000B9ED4B6785F4B96BEF7D4BCDD06E423A3E
+:1090000079FBD2F3DAC56544371D7D3B70FC6BF705
+:10901000FEC584F04BBA6E50B81D887DFFE55445FF
+:10902000CC5BBFD40CF8BCB0DB42FE6F6CBF83A935
+:109030005EEA27DB43AD153E0DE434CBC482F1C6B6
+:109040003DD8675CAB2F210EFCBDE339F97880FF7A
+:1090500037F4F8FF6DFFF8FF9DC0FFEFBE25FE8FD0
+:10906000209DFBC3BFF4BBEB847EA863ABC9DFFCD0
+:10907000C43FCD3510E69FA0DA491EE63FA5921CFD
+:1090800042FF291E57549FCCBFAE791FAE77FE1307
+:109090000AF16D4D90EBF9CFE74E3984FA7D4EBB66
+:1090A000D17F9A3B33644138E76D34DE9F1F8E8950
+:1090B00007994EAF035F9C89F2EF00AE77DC642F17
+:1090C00055211F55F34A53D05F7AD5ECFD3DF9E3A6
+:1090D0006FAA6C6B1CFCE7A715903D96EDBC664033
+:1090E00092CECEB31A9B09F5A51C77DCBCD22CF42A
+:1090F0006B16267B2F1B870D586CB4EB05A144E63D
+:10910000D58D5BD49666680F6ACF36F4BF6A63A1CB
+:10911000E1F9E0F0D586E7D76C2F37B487745C6F40
+:10912000E87FEDEEB1867659E41643FF6187A71913
+:10913000DA23BAEE32F41F797496E1F975DDF71B84
+:109140009E8F3EB5D0D0BEA1E707463FC6C4484F6C
+:10915000B24485F4E68125A72A4E20C30D57C621C7
+:109160003EAB46F1BE0716584C4E075E8B4D4EE0A7
+:109170008FD7E74C213FE0C00297DF4BD70A3FC6AD
+:109180003F4C1D333C18C7CF1DEF3C5D7142376F1C
+:1091900095D56CD073E39DC6F6B034113F0CE07CDE
+:1091A000332ACD285F6AF39488059AD9F30766E1DC
+:1091B0007C2067A3D3B89CD1F58A72E668AEC0362E
+:1091C000C859655A1C3963C2DE560A7E82ABDF522B
+:1091D0008E8C954C76D98F37BD743FA441BC32D666
+:1091E000EACB3D88EB32F9329009C7CD0C1CE0E3A5
+:1091F00009FBCC4A4CDFC63E4B39779BBC21B26B96
+:10920000698CF24B8FCD294E613AFCDE956612FADD
+:10921000A09DC791CEEDC33489C742FDFD8923B41B
+:1092200092E87D65DE942C943B773F7AD1E22E1A4A
+:10923000BC0DF4B1C553405779BF75A66962380EAD
+:109240007D1BD2789C21FDAEC151BFAB01F17BD615
+:10925000FDEEFA4180AFC6EA1EF2BBDCA6F605873A
+:10926000705DBF5179DE0C3C2BD40B73841F3D67BE
+:10927000D24F171C02FD34E7ED41A49FE43C9B96BE
+:109280004406EBFD86DC7EE2AAED029ECD4BFC831C
+:109290006B06115CA41FA49F9E1F6A9880F1CE00EC
+:1092A000D64C71E37A13AB8D37CE0A314E16921C31
+:1092B000E175DA494ECECE3DE6D0601D89C9C115B3
+:1092C000C86FB3AEEDAAE0FE98DF370DF8273F7206
+:1092D000F77AEC9FEFD65858E93B7F5675B0AD0052
+:1092E000D6B73CCDE4B353BB47C1FE090F32960E4F
+:1092F000FD97FF5D257896BF7E1DC3782DC1DECC1E
+:10930000D0AF95EBDA9FF638E147ED4C223BC8D061
+:109310002505FC7D57D0FE0B774D17FA1D5FAC3548
+:10932000D37C5FC01A9D30FE179D6A189DF7436974
+:10933000891113B4D5B664B2DFF9E88342FFB99D51
+:10934000C9616F41142FDAC6312C02F62E2197AF76
+:109350007F799A3D6C2FA075AFC1754B38E5BAF394
+:10936000FA89432369DCCE327F8981CE1E88C9BA4F
+:10937000706E0D9C7F18475D6BA638714EAA9DE0FC
+:109380000C2F090DAE31F75D5FAB7BDAAD77023C98
+:109390002D4754A6C238DEEE76C2C75CC047D8DB84
+:1093A00017DF67BD055F9A54823B82FCA86E9C4024
+:1093B000EB62E8D7C37B0D3F57D8E305C897C18957
+:1093C00044E76C137BAAA0EF3ADE48E3F9DBC369FC
+:1093D0004EBA5ADCC55C4EDC03076F83F1DE423DBA
+:1093E0006565F1FC80DFA7717F9AAEB1FA09EC6088
+:1093F00008E1B8B051217A9E54C21633A0ACEEF603
+:1094000066F207A47E52FD2AF91F524F49B8408FD9
+:10941000BD9FA6B38F6ACA834371DCFEFDB59DFB79
+:109420002CE8AF3919F96B528FF6E7AFA19F86FC94
+:1094300027FDB45331EB84F57D2ED6F779BCF5F5D5
+:10944000D1BF77354B3FE72F6997F133332DF1F5D6
+:10945000D355E99C0E4D4E0BA3FC14C6CBE83FCC74
+:109460003785B7621E4A0BDBA6EAF0939D2EFD3CC2
+:10947000EE6FF4A7F7AE149714AE2A25FD7BA1CBAF
+:109480009B9206D78C8F95E678E3A88B9F1D8674F8
+:109490009A6FAB4C4A07389DE9467C3DB6A28FFDDA
+:1094A0004A4FE7F8A36B1FFCD9017F26839FF86220
+:1094B000B197F0E749BF8C9F78F6B60F2BD02E9D61
+:1094C00013786AEC8D7BB99ECE06638579AD06E68E
+:1094D0007FF244096F5F5268D783F2759BED81413B
+:1094E000387ED3EE494FEAEDF7D7693C9FC6EC6969
+:1094F000946F95E3B984DE8738FBC64FBCA4FFBFE9
+:1095000044FA46E3EDEE0A8CB75A7E7D550AFA67B7
+:10951000E35EBCD389D70B190309AF675F4CF02317
+:109520009C67D3401FDBB13DF210E6213E5F7238ED
+:109530004D4F97B3BF7AA7C20CE39CDDF54E8586ED
+:10954000F90C91AFE9B54797FE501180F743635985
+:1095500049B35DC727566E2FD6DA78BE23D3656927
+:1095600065D7423C92994AEFAF73997E8CF755EBE1
+:109570001FF24FA09CC5E477D69ABD2D76E03388C4
+:10958000E57CB84FB070B0DF3307F33B53DD949701
+:109590006951B81E0DCDE1716846212B2980F1CCAF
+:1095A0002655C5F77A3CCCB715BA241C688FA0DACB
+:1095B0004BECEAF023F8C313D3089FA3CF38158CE4
+:1095C00027643E48ABE2E3F54CB784B7EAF240EEDD
+:1095D000991AD9C524AD83A19EBE2F338DE097F98A
+:1095E000A0AA6933039508D7C3268A6740F12AA841
+:1095F0000F73C43A0A3CBB5648DF4673215B324CBA
+:10960000FEB055C0FF0301CF0EAFC98FF957476EAB
+:10961000E4A819FCBB9CE58C7DA4F323932C42DECB
+:10962000DE5649DE92BFBEC93A13FCA3A4449E573E
+:1096300075045A17605E1CEF7FA71CE9C2DF27FA8A
+:10964000A898A662A11400397994715C49BFCE250F
+:1096500056DF4060E85D4B9C747D7A899BE0FAE9B7
+:10966000122F5D7FB2A484EEF727A757BA3EB2044B
+:10967000E6D5F153C648C00AAC37436524CF8F8C7A
+:10968000A8489915C71F90D7C7971C768D1B241023
+:1096900008F4C8AE776E59594074462182D5BDBDD5
+:1096A000C23F86B187CDFE050C586B4DFAD7E3302B
+:1096B0006FB54A31519EEAA7E96FAC08E5E2D54B98
+:1096C000744FDAFF1EC37CA76778BB82F2EEA96FE6
+:1096D000273E18DED5C582E2BE1FDA9E23FCFEC3FC
+:1096E000368EE7D58C4D4478ED0A0BE0F59C8DFB6A
+:1096F000839FDAB87E3C2DAE43D2839B518EFFE62A
+:109700003C5AFC3080672B7D3F1FF73B92F67F452C
+:10971000F96075A8C58AF2E1D97B9CF6415453B72C
+:109720008581497EEDD13F537E4DB5040A78FBD744
+:109730002BB19DE9086C41978D85FE3CE9801BE4C7
+:1097400006F9E17AC24608E578954DB443C7080F9B
+:10975000ABCCBCFDDAA37FA275AF3207E6235EB0C7
+:10976000BD1CC65B95DAE13641DBBEF4BD15876FE3
+:10977000C0B6ECFFDE8A10BCFF52BAD437010FEA44
+:109780008FDEB613DA43746D8DB799955FE5FA1ADB
+:10979000F67F752807F8B571AFD281A079F6AE5182
+:1097A000709D9EDD6B08DFF407F281CBA03CA935EC
+:1097B00064C1F79F5E72D8B91CE8ACA5B5B910EFCB
+:1097C00057B9837E7FBCFC44A6F47FA1BF3ECF1671
+:1097D00036F774EBFC710FE372C396837E88E35F08
+:1097E0000CCDAC3C9D01E3AC55822B55D433CF99C5
+:1097F0009DA8475817D74367C4582C9C4DFE4DBDB4
+:109800008D37CDCB822B07A39EB85BF361FC5C57F1
+:10981000D05E89F6BD6E4F816F298BF24B5D6A87F2
+:10982000AB1CF927D5D86E117997ACD4E6D4D452B5
+:10983000DC8F58938FFB058DACFD9E1F20BC6FA95C
+:109840000CFDF4D3FBAE4B190DED0668A3DFD0D0B1
+:10985000F98E05F9F3D10CAE3F1B3B817F609CD59F
+:10986000205F7E7064B668CE44D44F4FFB9BAF46FA
+:1098700017EFEB47FF6B920DE8FB4CA1DF89F47605
+:109880006798575AC1697CC6E21CCCCAB06D27FEE6
+:10989000AA2B33713962F6DFF835B1FF09EDE38F9A
+:1098A0004EBA459FDFF5E0BE0CE0B969933D644ACE
+:1098B000217BF3BFD1DE366E3485507F99AC5D16C7
+:1098C000A4AF1BF776893E4EC2DB22A9CF63F4F525
+:1098D000A24969B7607BD1C385CED065F297B51731
+:1098E000935858E71F3D9AC1E5B8560BD13E4AED53
+:1098F00045073DFFE7CD6763E161979BCF4ECFE51D
+:109900007CF5D1F988AEFBCB7FB37E20D06DD14EF4
+:10991000B32941C7778B768AFD6A9B3F0BC7C9B4D1
+:10992000308177F0F701BF5A416F3BA4819C3FD251
+:109930002BE703568E1B83748B3E67A30C7AC08F74
+:10994000F1E62389520F5C15BF7F624CFF42D9F6C6
+:10995000AD1C97DB179ECCC468DB0AFDB5FF4EE853
+:109960006D237C6B4C31E3A5C9F947D17892AF8E5A
+:10997000A757FE2634109EA7B65762FD46CF1CE6B9
+:1099800045BB8CFCEAD3E9FDE3E95CAE6B2F16190D
+:10999000E81DC57BB1E1FEC9256EC3BEDFBCEA454B
+:1099A000B43F791CF53C8EC3421457D56ECA616131
+:1099B0009D3FF5FFE1F847E118DD0F1C37FE0FC3AF
+:1099C000516090CF281C030DF7FF5138B6DE517C53
+:1099D0004B017459A784AC8568171E3251DE444D83
+:1099E0001DE75D8AFB0F0F69E4E7A14B82F51F8538
+:1099F0001A3BAC95A3FCB4FB31CE67CB78FE08EEE6
+:109A0000B799CBC90E911F5CB437E13EF4D30A6B12
+:109A1000FDF3F1CA724B697F43EE0B32910793FB62
+:109A200019839CAC5203E76D74E67D64A70A03D5E5
+:109A300075E8CCA9C9C313D13EAE338543385FE87E
+:109A4000A77CBE4C53B8C38ABAD731D089F62ED37F
+:109A5000C1F51F5B594AF66FABA9F0EA0500C7C311
+:109A60004A65E29B88E7D442CAFFE2FD85707FAB7E
+:109A7000B05B6AAACF89766AABB05B2D42BFCBFBE5
+:109A8000496981FBD09F3895B1E816EB75A887FC32
+:109A90006DE9606F4E662C5AE9F6A0BDF1165AC109
+:109AA000BE9C5CFB00D99BAD4BBDD9CED4687BD0AE
+:109AB0007F83B5263DF1C04AF45796DB17DE8FFE53
+:109AC0000E3CFF8D15F4EC336942EF88E785BD7AD3
+:109AD0000AF412E83175696F3B847AA9B057EF3CFC
+:109AE000407A67DB6695DA6FC37CE8FFC03A422AAA
+:109AF000AE7790467EBD0D604984B66D7021ED1342
+:109B0000C1BA5922FAD783F97399CFB70C32513EB3
+:109B10001FFB231E6D1EDEDF3295F9705FCB926C4A
+:109B2000A73844EE0FA8629F2A51D46928CEA91401
+:109B3000DF5957972FC478CC3AD0B80F6B89A9E773
+:109B40005063EB3BEC11F2BF4E6788BC7E3A735F0B
+:109B50002A8ADE07BD5D8E57D79DCB2B11DE85C9C6
+:109B6000CCA9625E2518A17DCE58BB66053BEAD51F
+:109B7000C987D5CEFCF1EA090E65723FD67E51A3A6
+:109B8000F866AD02FE0DDAD164CE67D23F323B25D6
+:109B9000DF1AEDAEF497CCA97C2D8B268DCDC2F8C3
+:109BA0005DB5FBADE8E7EC7396535E4065BE5B2B9D
+:109BB00075FECEF2C824CABF694E3FF9E145224E78
+:109BC000549D3EA6F7735A9740607915634F56141B
+:109BD0008F457978DC16B116217DD79928DEDB5FB9
+:109BE0007E7F48C1FCDB624672FA64856B2CE6D14D
+:109BF000B7688194BB515E8EC07C5E4E37BE9FDBE2
+:109C0000A260BEF80B6B2005F5C123C8F73ABC3C37
+:109C10002FF0F1F70CAE7F1E3673B968057822007D
+:109C20008776F11ACA6FADC9E4790F4BF538CAFFD0
+:109C300058001F98DF4B60CD2127AD97E7EB12DC72
+:109C400026435DA0767128BDFFF70C9321AE6E838D
+:109C5000757A75FACBC64294AF431C3F15C77F791E
+:109C60003B93C72356F087BCE49FC4EC73F7F58F92
+:109C7000C85F91F4E9F55314F04F2E138F3541BCB2
+:109C8000ACD7F74D5A0FE9DF268887F1FE39A79543
+:109C9000FC4359F76017FAACD51D6C1F8D7C9EE80C
+:109CA000188A79008D7510525663DD03EA43B7D6E2
+:109CB000D3CBFF20F32D36C756ECB75CD44124F943
+:109CC0008CF293C8DA237E94CF129DDC30C477885F
+:109CD000C64DF01AEF331664186768EED83A89500B
+:109CE0006F3D14D5F369EC31DCBF967E6F8EA847CB
+:109CF0003A9BF421E5D1C0EFAD4CA77D801E8A5B75
+:109D000064BEE7DBFAC9453806E61116FFB5E20482
+:109D1000CAD9D40905783F49E37C02AEB896508E83
+:109D2000E1D584F9A9B0FE3B85FDCB50DBA96EE4FB
+:109D30003511CFFECD39D3437114E093EA6D127D16
+:109D4000DD142F0A3F4DEDD58F7F5EE137FA9D215F
+:109D5000BD9FB76ADD9F572CE7F10AB55F7B3442A0
+:109D6000FAF3619B6CBF4C6DB073118C97D88B0963
+:109D70005EE44378DF8FF2C6EE28263F5B2D64D980
+:109D8000888F710E2BE94DF5C584ADE807435CFC67
+:109D900052BA6EBFF86CF2D17CF487E38C17328C28
+:109DA00097FFEDC683F93BB11E473E1FE7D8185118
+:109DB000F97B5E7C8FE5767D1882F1D7FD3A81AD27
+:109DC00004143E6E36CABBBC6E15F28CFA465F0FA9
+:109DD00069A9AEF123534BB94E7027B2888E9FA468
+:109DE0009C6B1707B3884E4E8A32F9BEAAA6F92992
+:109DF0008FA45D2CA5E77F4799A6799C579827AD3E
+:109E00009F798691FEE87F9E0AA15F98D8BFD2A86D
+:109E1000AE46EA85FEE43C769F2C562FCAABD48B27
+:109E200059997CFC7D99C6FCEBFD1B3B0E210B7DFB
+:109E3000660F1EC8A4FAA8630E34E1F5A6C850E464
+:109E4000E34FFADE6FC4C5BD95CEF3FEC5DB17BC8C
+:109E50008EECDA9519FC02FDA0DF648AFD4937D843
+:109E60004315ED1DD88B52CAE77E9181F9DCA077AE
+:109E7000C37886F27407E573535C81521CBF755A30
+:109E800005E51C24DCAB96F03A35A967ED5A90F055
+:109E900065D542FCEA0C820D67EC42A679B2A62099
+:109EA0003EB91C1D5D7781E4C0A6F989AF6C4E9365
+:109EB00017FD021BC485A877973A4D7CFFC66DA598
+:109EC000FC7FAB021122E88D85A98597DD1FB75C69
+:109ED0007491BD0548DC7ABDFDCF9F2743D807E3C9
+:109EE0003C9A93FB0D6C3FB7C388848F75FA58FA80
+:109EF00003B1EFC58E2FF129F16B45BC96923D8CD5
+:109F0000EB6FD85CC6FDCC2CA96F338F1647E06E83
+:109F100083D2ED40BF06F4A8CD857A7A488FC3E49A
+:109F200025FDEBE27E5048F035B3EBF95AE6A9E5A2
+:109F3000BA24FC0BDF9C63D5EFBFC4C21B6B67ED7B
+:109F4000A5C6BA059BD758B720BF0B50B500F18DF9
+:109F5000798CDF8A72B2D459EE443F67B9E6FDA32B
+:109F60009FEA2DCCE46F83FF6E985F5E1F01F94777
+:109F700038CA5C26435D8DBC26E33E4A9CF7A6BAF0
+:109F8000B89E7A64DF9DA487351FDF678AA51F63AB
+:109F9000EDC42FC9C5CC49F95301AFE30AE3F6C7B5
+:109FA000473FDE67233F591B650D635D67EC7CAA65
+:109FB00039E05750EF9631F293D53C3EBF3A885185
+:109FC0001DB863781A2BD1E1B1D53D8D9E2FCC748D
+:109FD00032A4B79A6C0AC4E31789A7812E93816FC4
+:109FE000DC926F3CEF17A31CE8F826108F6F06BABF
+:109FF000B8BE4238F4F46D751766C5A34F542F727E
+:10A00000BEBA125FCC4AE27E4EA785EBCD06C411E4
+:10A01000C44BF5999656CC7F9FB1F2E7CC5FC2FD59
+:10A02000322BE7B95949F961F4873A357F12FA655D
+:10A03000B37AF76DFDF4BD47BDCD9F721DDAC777CA
+:10A04000B8DF7CB2D2DEA6C03827CDFE14C4F7C973
+:10A0500077546529ED83F3FA39598774D2EC5D752D
+:10A06000353C9FFD33D5BF941E1BFDC133CC3FEC67
+:10A070006DF48F77ABB4DF52F0D3FBD421D0BF06A1
+:10A080001C45E4A75955F610DAE1CEF79B3F447D15
+:10A09000347B73827719D6B16C1CF625B63F5D9D73
+:10A0A000EC4DA03C5BA1E2C1FCD79A0227ED9B2CB2
+:10A0B00066229EBB7D7215E8D05FE2D4327F0D6BC5
+:10A0C000FE94C9E7A155E3609D5767769AEC00932B
+:10A0D000B221B4CA0AF47B7869C08DF163876BC67C
+:10A0E0002A8C1F5D2E7FD74D102F9E70DD3919DB16
+:10A0F0009D8FCBF1EE5AE507BDFCB22958A0C0F305
+:10A10000A4AC072653FD6A911CBF959ECFFAF95562
+:10A110005F1E85F1CB366C9C8C39B78A6AF17EE87C
+:10A1200009826FCE18D9DE9A543510DE4F62863C14
+:10A130009A391A8F529EAEB3D7BF7A7A32C69FB37E
+:10A14000C736576930FEB20D3B569582888C6CAF8E
+:10A1500074FAA1FDA30DAF4F4E027EEB64FE3A8C64
+:10A1600077576D3830D97A038C9F6E1C3F4315F9B1
+:10A17000D8D0E15598C7EB858FBDB7CA3F30DA7F9D
+:10A18000983B61752837CAFFFF2AF81FF8FD572E44
+:10A19000DC07B4761FC2145DFEE21E0BAF7B15F523
+:10A1A00029B9DD4379DD8D689774F33A65D976F383
+:10A1B00076E7B2F8F6FE2F6E2E779D89F19F7F2805
+:10A1C000F439C0EDC7FA9594A3CCBF238E3C1D741F
+:10A1D000D949FE0E82BF674D8BCAD5AD20DBA3B037
+:10A1E000FEC7CAE194E3C4BE7F4CE82716BA350D1A
+:10A1F000F9788AE0F3229FC2EB7876278507A1BF22
+:10A20000C722DA6DB09EED229FB1DDC6EE9D0A53E6
+:10A21000BB12597027FA9FE9D02EA5F7FD3BEDD16F
+:10A22000F1DEE2A2CCC61705B6E178E3B33C652DBA
+:10A2300005D17100EEE5D67203DCDAA8347C1ECAC3
+:10A240005E50AAC367295F07F009E10BA679F626DD
+:10A250009097CEAEAB0B57C21256B9BC86B8AFA220
+:10A260006B1A7D97F29F6EEEFF302F7F3FB38AD738
+:10A2700085F4EC49A23C05B37615239DE47B1705D4
+:10A280003EAA7E346503F6ABEF3233AAFFDF59797D
+:10A29000597FA01EF37A3AFFB15E8B503C578F79FD
+:10A2A000BD6138DE5B16B463388E57E4AF312F974B
+:10A2B000D9129FFED21ED65F4C65A1617DF56674F2
+:10A2C000FC0C7A7EA57545C733C69D7DC7B3887DD6
+:10A2D0000081774DE0DD121FCE0159824F01DF264C
+:10A2E0001D7FCD11FC06DA93FC80732F0EDEBAB20F
+:10A2F000403F2FFFEE06F4F3B337A1BEEC4AA4B8FB
+:10A30000A542F34FC6FE155D69B4BF20F943F2853F
+:10A31000A46B675A33E56B7A1E53C80EC6C2552C20
+:10A32000E1DAA8101C59D541F53E1D7C521E60FC97
+:10A330004E31FEF051243F4F707900B9B91BE5173B
+:10A34000F72B711DBEEEA1D386F485FF2768FF466B
+:10A35000101D39FE7F6D13F51C1C6F7DF19F730579
+:10A360007AE6D3F38AAED7699DF5FDC8ED5B6E073B
+:10A37000C1997534E2F042BF4705FF77767CEC184F
+:10A380008D72B15B658A97AF1BF55685D4C76CEEAD
+:10A390005B6341FF65F5B6415F7A910EBDFA3362AA
+:10A3A000B546FBBFE29E3B65393CCB48E0F29AA143
+:10A3B00082B5298FC2313D8BFB59A382F1FDD27743
+:10A3C000DDC9F45CE2FBB1C555EC6358DFCF5C7CC2
+:10A3D000FF7354774841BA48B98ED5538BB2B83C15
+:10A3E0002EC8FA7FA4A76C57D05336A9A7F8FD83CF
+:10A3F000101C613F97AB7BA802FE738DC9EFC2387A
+:10A40000ECC43B3FA0EF38E689BA952158B7827675
+:10A41000F36880ECCA697CC8EB571EC218704EBB4B
+:10A42000B17E856DE3DF89C6F255948F42C27F17F6
+:10A4300070087B706B42F7AF7891B1519E651BE05D
+:10A440006C3415E99EDBB9DD9274007A2F6769518F
+:10A4500039FEE8C5AC2DA86F87B9795E31A3C85F16
+:10A4600086EB9772097655F089E9DE6976AE37A6F4
+:10A47000C5E1DF27847CCED9C8F9A6F3BFAA26237D
+:10A48000DE3BDF4D4B5DA6D3134F093B28C7957AC2
+:10A4900048BE279F3F29F8637B9683DA4FB99245E0
+:10A4A0009EC714F7BBB9A774F695F8A78DF30FAC48
+:10A4B00037A4E7EF616EC5605F7BEDAAC0738305CB
+:10A4C000F00BF8DB6E0E6563DD4E459789C6ABD9A0
+:10A4D0009D4CF580351D1C8F35EDFB4C753AFCC449
+:10A4E0008EF71F59DC1FD862E27544074DC06F8894
+:10A4F000773B87EFDC8B1ED29F8745BF2BDB8D6FB1
+:10A50000A667B658781D29D097EAF91A5ECAD962AB
+:10A51000D4D34B05FE832DF81D5BC606E6C35A2B2C
+:10A52000C0534401B867B885DEB1F82DF8DD6ACFB5
+:10A53000638CF6F30755FBCBBCD06E0AD8CB15184D
+:10A54000AFB89DEBE18AB5E0C7A0DC59A55D787393
+:10A55000877EBE6359C9221EE1FC5CB391E36F1094
+:10A56000F83FCFE215C6F915F9F11C9E8FD6778C0E
+:10A57000C6FC937CFFB4A0FF95E0AB40F88647E1B2
+:10A58000C3F1919F983DB00CC76DFCC3AE1CFDB8E4
+:10A590005F66717D9BA1CE1A6B433DBF06EC0E49F1
+:10A5A00067703F7E9750B337D5B992913C9B30EEA0
+:10A5B00091F3D6883C24C85DC554585A71EF3C923B
+:10A5C000AEEF3DA75FBFE6E6FEDC3F8BBE9D96206B
+:10A5D000ADA76727C0EB8DE2A5B3E3BE6536B41324
+:10A5E00047990FED8484775075B703EB4E9A84FD3D
+:10A5F00080F59A307EC9F89997B520DEBAC65A30F0
+:10A600007E8AE56B49A712C6E547C66925B84100B1
+:10A61000ED3CF750A17F18C5BB1FBDF4CAB32B2971
+:10A62000BEE27469AAE674AC740767B833A3720813
+:10A63000FABC02F555CDDA5E7DD4C1EF77E557035C
+:10A640003EAF754B3937D22523D061C37D0DC9D7B5
+:10A6500067F70C09AFE474A6F93B3B92C38A82DF2B
+:10A66000A1362FC5B85BEA0984475F8729E1E9A5D0
+:10A6700023033A0E89DE1F54CDC76B0279473EAAE9
+:10A68000579B158F427A80F2AC59A807A09DD5C17F
+:10A69000FBB1BDFC5C0489A7FA193028C49D7E7704
+:10A6A00029AD43E22BAB3A62AA875B13AD55FE138B
+:10A6B0003A7FEDB0D86F40BC4CA37883EBEB7A3592
+:10A6C000908B712BCB4AA0EF38C10E917E39686315
+:10A6D0009A0DC67B03AE6897C6AB0BE83B9AF14573
+:10A6E0000AC931680099F789A03F7DEB4D4924FFE5
+:10A6F000ECEB0706E23A3393381FC23856318E9599
+:10A70000ECA0B007BFCF07BF4E89EAE5838A42E3DA
+:10A710001CBCE19AAD545B28F812C743FFE9A03294
+:10A720003597EC6567A6282EE2F0F76FCFBAF3F104
+:10A73000B93E5EC4F82E1A6F96ADBE19786AE4C4AD
+:10A740008E88C989D2317CCABF01FCE321DEB4C145
+:10A75000FAEF137C7DB020A43A10AE41B06EB8750C
+:10A76000283158DA6C8FCEE312F91B97A8DF457FAA
+:10A7700001AF260FD7FF3FF6707BF181B8BA1CF10D
+:10A78000F33D1745FF3FDBB99E5E5919FFBBED87CF
+:10A79000845D9171E7AD62BF03E2CE87DC3CEE14CD
+:10A7A000F5A77C7F04FC7BC26FD58FAA69DFEF8B96
+:10A7B000AEE929FC3C04AE0FE688FACF7B1F9AFE77
+:10A7C00013E4B31358670E78F844F0CB09A7DF8180
+:10A7D00075520D89F1EB889F14F034083C9C5CC2E3
+:10A7E000CF2F9883FB72C07FEBDCDCCF9BD77EDB67
+:10A7F00004A4FBBCB50AEDCBC9FD7F49E7DA4DAA3D
+:10A8000021BF3E07F7E5D2FF9178AAAC9F786AB8DE
+:10A81000219E92F3C6C6551F2D711BF60166B51712
+:10A8200089F32378FFD9CC4770CF6ECB31EC23B2BC
+:10A83000B6CC6FF4DD3FC651A1B8F0590CF73F5AC2
+:10A840006265213D1CA70652FDC443EEE0CB6E03BA
+:10A850001C492C64C8878E71D2F744369E87057FC9
+:10A860009CC73170DD62277F7D22FAB3BDF930D0FD
+:10A8700023CE14D44B95FBDD23A2F18394B3FA319C
+:10A88000F1E38875C20F5AE7E27172CA511957276E
+:10A890007A513F4ABF3CF6BD777BF9D7E8575E292E
+:10A8A0000F017C1CD2C749B1E39E72FFA3F177511F
+:10A8B0003FFC52FC3F127F578C09529E8FB52B54A0
+:10A8C000D332729C311EFA1AEDFA08BC2619E2A1A5
+:10A8D0009A6A633FE6E1F69F79920C7E7C7FF8D41A
+:10A8E000FBF14A11EA413E5EA3E08B82CFDEA57AFE
+:10A8F000D2311EEE178DC8F62778E0BA5AD493AF3E
+:10A90000B6F1EFF9B7FCF77EF76CF48FDE36D3FEC5
+:10A910003FDBCDF9A6F289452D783E80BD4371EA33
+:10A92000BF5FFD97C58ABF06E43A5DE8BB7A1F5F4B
+:10A930004FBD2F621968C7FA620E476EC73E45D3F6
+:10A94000F15D6E2DEF97E7311BF2E205A23DC0E30A
+:10A950009471CCBE4919D8DFAFA15F90DDA190FD05
+:10A96000CC6E66E457670F5768FC7F19BE45995D4A
+:10A970001A5D6F9B696AA913DE6B7325F9D0FE2CF3
+:10A98000C90E5EE541F88E4522682E471EEBD23097
+:10A99000DE5A93ED2F413CC8757A556736FAF14976
+:10A9A000C7387CEDBD79266E7F185B25FCD2ADDC07
+:10A9B0003F53D961C6FD73B2F3AE65256407E57AEE
+:10A9C0005C69C28EB85870979DFAB791DF62E57ED8
+:10A9D000806B5931F9F392AED1B8737039C69D4589
+:10A9E000AB23DA2C78EFA54DA6B8E7554C10788745
+:10A9F0007554EAD77125BD25FB99FBC93B4ABE4F6B
+:10AA00009A183F9E074B48CF2B9FC8B88BE473B969
+:10AA10008561BE5AE27F4D76E0768427BB638B82E8
+:10AA2000B8F948D4297C94C8F3F11FAD7C5641FF96
+:10AA3000F281F9CCA9B2FEE1AE5FACFA6BF4F2BCE4
+:10AA4000DC427491F14A141E9E8769F070FB7428F1
+:10AA50003B5083F46EDCBD86E2EAF9DB8E5B2EBBF5
+:10AA60000FF10DF1A6D4727FBD7EA695EA992A9FBB
+:10AA7000D088EE75CB2DB46F58BF63277D9FC61E5F
+:10AA8000643E94FFFA8E9D4A0DCC5BB763A73247B4
+:10AA900087C79CFA30D56F5F952CF72322E44FC708
+:10AAA000F237E611D07F3964E3F27FA6D21EC2FDF1
+:10AAB0008933E6603DF63BE349F2E13EA6C4FB1B69
+:10AAC0003B6FA6F30292772544F0DA66DAEAB642E3
+:10AAD000BFB6AB2D3EE4A735D9C1154897342DD06C
+:10AAE00089EFA76624FB707FC39BC0CAC97E7F43E2
+:10AAF0003C8C8CE18B910F72797959E817F8A37A25
+:10AB0000AA273DDC2FC7ED25D45787CC7C1DBB1869
+:10AB100087D7E4F16F443AB1C369346F767D44C19D
+:10AB2000FA8BD879A37CE5DFECC9FC3670765850F7
+:10AB3000CFD7097D53F9C436E5631DDCCF79548244
+:10AB40002F7BC71605F367F09CF40DF46758EF945C
+:10AB5000BD83C7AB75F07C8E4EBFC875C4D1339D25
+:10AB6000089FFD58D701AE67227CBF40C01B4BCF6A
+:10AB700088C74BF34F007781EE5B4225182F1F2AC1
+:10AB80004CA4F1A4DCC7CA69C4C3FDCAEC4DDB14F4
+:10AB9000939DF655C8BF94F0C97E23B2C71EF0102E
+:10ABA0001EBA080F0D9B345ACF784B60E0029D3CD3
+:10ABB000BC2BC67B7DC68774AECEDA7F7F87F8B1AB
+:10ABC00001E26C8A33DADFB14C473B13FA858AFB2A
+:10ABD0006093B98BC2D68B73A72677723DDCD0B950
+:10ABE000539B6D8FF269C167AFD379550D1D090C69
+:10ABF000E32BE0BFA3084F2C9F4AFC483DDB1F3DE1
+:10AC0000411FF1F829641179BE6001C63F524F9B84
+:10AC100084FC333BBFFF855857947F829F790C7A21
+:10AC2000D6467251F059F9EB58EFD9E053E8BC8E93
+:10AC30008C2A8E4F3D5CFA7830564F623E31C0E32D
+:10AC4000FBFC69BAEFBA7AF5BD78FF22D29BDB8DA7
+:10AC500008BFCF0AD17E4BF863E937309BFB6571A3
+:10AC6000F84CC91ED1D79E493B5FB0799786DFE586
+:10AC700048FE998C74D7F18F33DB42E33AB33582C7
+:10AC8000677D25DF8F5C6FE6766CFD522BD567BE46
+:10AC90007127AF174BBECB12C1EB41D3AC7A7C7E90
+:10ACA000309BC3D1665A46DFA9815CA66613FF3884
+:10ACB00018D78F5C1FAE7D81EBB3FA909DE2DFFA6F
+:10ACC000E0ED35540F9061F3611D2D0B1EB04C4F1C
+:10ACD000EECB57DE5DFB2C08FFE40E2E7F920EA01C
+:10ACE0004F89BFA43C48BC46F11936C893A487A934
+:10ACF000D79F0816707F89C75BA5E23BC25AABFF9E
+:10AD000090D98B710CCFCB968AEF09655E7696A0B1
+:10AD1000CB667BC087EBEC9397FD86F142DDE2DFEB
+:10AD2000527C76BFFB4DBA4AB985B8D620DF3709C9
+:10AD3000BA176773FB3E219BF34DDDF00E92CBBA41
+:10AD400013CD24CFF6895CAFD98FC5F88FEC11A154
+:10AD50008757D37BE3933A26E0BEF2F89F2B4E8CC5
+:10AD6000F7FB83731E7E8F8571DFA6FD8EFB10BF00
+:10AD70005F43D4A1FB5E67463697AF33DB01E1C486
+:10AD8000EFCD96CBF9E3571A8F458E28741E88C0F5
+:10AD9000E5991D55D77D82FB40DB537CF8DDFDE74F
+:10ADA0003B6EFBFE2700F7996D37F9D04FC8680955
+:10ADB00010FFF464DA7C5B799E7622E6B19676EC3D
+:10ADC00077E0F73DA79FBDB61CF576A380F3B317D8
+:10ADD000D4C5889765CF3C7F233EAF0B2BE9E8BFF6
+:10ADE0009ED9FEF3BF67C338B5DB9AF0A431D6F223
+:10ADF000EC6B141798C25BF8FDED29E4E79E7E72B8
+:10AE0000CD8D88EF968E167AFED9935BA8FDFA3326
+:10AE1000CFBFFA5FD0AF3EE0A0EF9E3F7B611FD176
+:10AE2000A53EA8517D7A7F7CBD7EE73EAE2FD1CE78
+:10AE3000A31CCCE47A4CF2B5E4DFD3CFDC7B9DDEFF
+:10AE40006EC8FB6D229FD396C8EDC8E7426EEBC675
+:10AE5000DADBF0FAF973363A9FB3D1D25D8C717EAA
+:10AE60007D29E78B07053EEA3B16981BEDF43E8DE6
+:10AE7000F39F20EF781D02FC897560D06BDB25AA5B
+:10AE800067FA15F5877EA330DF33A3FA38FFBEB328
+:10AE9000B4D95C47703ECB9FC3AAF5CF2B16C58FA4
+:10AEA0002FD767DB0DE7AA65774ECDF5921E48F0E8
+:10AEB0000DD2F9BFD9B5C19664B87FCBA2A00FBFA0
+:10AEC0008F7FE9D4BB13F03B86674A9461447F557A
+:10AED000E1762E64A7791A701F09E28FED424E20A9
+:10AEE0007CCDB81ED6335E6319F889EF78C68E988C
+:10AEF000492F3C45E3839F43FE9BF7B5194FA1DFE4
+:10AF0000B3DE1CF48CC071DA847DDCC6E187F79D6A
+:10AF1000F6721ACF793DF7D717E27BE7974EC94013
+:10AF2000FF1EC6ED32EBE231E0C87CB48F38DE7034
+:10AF3000C4D3C4D04CB2535E0BAD4F9EFB09EB1F84
+:10AF40007AF790A87CC6E69B503F617EF85076E584
+:10AF5000BEECCCE8D5D54FBEC69C03CFD19EE5F85C
+:10AF6000E9FA4DCF117D7DC6396EE75F3E4E7CDB41
+:10AF7000887C8BF3074F18ECBCAC7759BFE738F1EE
+:10AF80006DCD6EAE8F1B77575A30DEFA7C899F7D70
+:10AF90000C8E6EA3E0BFF54AF75CFA4E6C8F8DBE47
+:10AFA000FF3B27F9B3FDF8A7A87F0A777B289F709E
+:10AFB0006E0FE7D3832613E5010E6EBD664B8BD271
+:10AFC000D7AE82BF4D72D2D8CC84BFBDE85DF4CF7E
+:10AFD0001A6A793D7A630C1F156CFEA815F92515C0
+:10AFE000BC63ACB3017F66027D3F59CF46A09C662F
+:10AFF0008FF3EFC9A17D421E9F67D7823E81F62D58
+:10B0000019F37D78E455EA38F08B91FF326EF061E8
+:10B01000DE6C7D5E472BFACFA1F18CCE575D6F6E53
+:10B020001F8B71F0FAF15E276012F0B68DFC6B5643
+:10B030006211F6AC86FCF246F7777C94D78E95FFCA
+:10B040003D4BC9BF6BF426FAF0BCDBC9BB9585DC70
+:10B050009FB13384BF11F08BEDC9E1D16184E7ACBE
+:10B06000C09FC4E33973179DBB7BEED709748EE193
+:10B07000E4719C5F53C77590FE7863CFCD64AF25B4
+:10B080005F26BF9840763B4D732A98E760ECB60484
+:10B090008467B680A75DD4EBA60A3B52B49AFB71D5
+:10B0A00029395C9E52724CE26A117C2ECF6509519F
+:10B0B000DEE1ACA03FB189EE5CA7869A08C953FDDA
+:10B0C0000E3E5E4682BFEC011DFF4AFF4AEECBE218
+:10B0D0003EEDD438FC3D42C051B07921D17D76ADF2
+:10B0E00038F76135F72B18F005E20DE8487C704B16
+:10B0F000C63CA2DBECD5CA5D44C75005E53FA57F41
+:10B10000163BFE75627DDB6D81E158EFD79399ECBC
+:10B11000C33A82EDA97E13ED2394A5521E24339DDC
+:10B12000FB8B99C25F8CCA7D60B809E639E54AE6B7
+:10B13000F40EFF5EC3FCF6F81CAFF4FF0C7E5EDF7E
+:10B14000389F8F37A53D3414E31EB9CF2CF1115E23
+:10B150009A3853AF4F6F12F8080F6633516F403C67
+:10B1600061A73CBC13E6C17CC2D6D14FF27C023F42
+:10B17000FFB92487FB3DE3D303C3D14FCB2C0A2C6B
+:10B18000E2F693AF33161F87B2651C704F19C6B134
+:10B190008DB7DB7D28776B5F5666115F87AC7828AB
+:10B1A00010F03D97437098A8BE8D0535A247637394
+:10B1B000201C9FEFA7929C3582DF8771C064E4F367
+:10B1C0000CE2FB30E77B6EFF64BE01F5A4DEDF9688
+:10B1D000FA40EA19B46FC8CF522E1A6FEC2E46FA15
+:10B1E0007E53BD72CECCE5FC1CE001E548CA4DF2B1
+:10B1F0004B5C5E562EF556E2F39520F77A7AC7C679
+:10B20000670827C62B52BF2FC90E3C90837907537E
+:10B21000A495BE4115FAB8F1A515C5F1BE2392FA61
+:10B22000D82ACECDB48693C2FAFD12ACC1482EA75F
+:10B230006B08ED51D2E2F8F998D61C695FFBD4AFE8
+:10B24000B5223CB1F56B2EB45D283F5B93E87B36AD
+:10B25000999F8A1D77B1E037491719A7E0BE07F615
+:10B26000DF9AC3F9659DE8F76C8E22E4226CE07FDB
+:10B27000AF29781CEB0FFAB363F2BD7F56BE4CCEFC
+:10B2800023ED692CFDE5BE0DAE676A69FFFDDAF7B7
+:10B29000893830861F77093969CE61B4EE7673E458
+:10B2A0000B92AB05C98CEA7E36327F3AEE07BE7A46
+:10B2B0001597077F4F318E3F342FE8C81D11CD0BF6
+:10B2C000E37D8C4FEA34164A009AD46D3787F5DF58
+:10B2D000D33C95CBC73F9F6C0DA9C0E7FEBCE0BE39
+:10B2E0009C11743E087D3717FA818DF6B1C0911E0E
+:10B2F00081FAA589753B10CF8D6A5731E631AB5D78
+:10B30000C14348FF8F4C5DF9BCFE83EFB31D137939
+:10B31000DF6322EFDB6989E4FD5B46F41CBB0B8C29
+:10B32000D75F5DE832A5611CF8C1EE3F3CF732BC47
+:10B330007DF7CB67EFFE21626B65D23D3F836BB536
+:10B34000550D68BAFCDCB1E4F87AF6CF82BEBDF5E3
+:10B35000514B13E2E6FD9FCFE5FD9A62F6B59FCF14
+:10B36000E5FA34FA7D14DFD7FEA09FF3AFAA72B9D5
+:10B370005EEF14755BB1CF278A79B69B59F146848D
+:10B38000674B32D503308D9F5B56FB68810FF7F119
+:10B390003B0BF939F93DEB14B203C7CC5CFFC0DFBE
+:10B3A000EDD68AA81D453705FDC45A67286202FDFF
+:10B3B00051BB283982E765C27D6D0CCA5AC849F570
+:10B3C000C3B3847D9CDDFCC65798F7A8D598750C4F
+:10B3D000BC77D25EE340F330F7BB0FE051342CABC7
+:10B3E000BA5DD4998A73D8FC53D44B4997F3EB8C4C
+:10B3F000DF97BC901B30E7C2FAAB5338BEAB1FE0FF
+:10B40000E7F1CAFEBB85DD8BE5B7EDC8AB00EF8782
+:10B410000AB72FB1F364E78DED40FEAB76079CC809
+:10B42000C7D50F9C35E8B5734AF7D33F43BE5C9050
+:10B430002CCE4763F9FA3AA521B95C6EEA70DF0CAD
+:10B4400054E3F9B2AEE2C505C8FF3DF97FC4BCDBE9
+:10B45000DE04AA73AEC3FD33DD7E777FFB67FDEFAD
+:10B460009B792DC8E78D1715E293597BDF388A7ACF
+:10B47000BD51EB26FE9965B5137D1A2F6AF49CB574
+:10B4800099CFE8BF975BE4F65F83EB0BFD684C2A2E
+:10B49000EDBF65C17DC273099DB7B150D49767E711
+:10B4A00005CB11CF1B921CF7627C78C1CACF576ABB
+:10B4B000B2F03A7226BE43967CC272938D7CB0F78E
+:10B4C000CDAF10AE1A6B90CEA99C3313E26915E98B
+:10B4D0001619E12CD5D37FCCB73A27D7857A03E06C
+:10B4E000FFC0C2EB88FAF23FA7C3F342BF7C90CD06
+:10B4F000E5E8837C56BB0BAF57C315DEFBA050B409
+:10B50000CB793B769C7A21471F0CE5F62BB430298A
+:10B51000EEF920F708797C21D77F07E255DE7F52CC
+:10B52000C0919DE7BF13F108FAF16EE2AB14164922
+:10B5300085F1AA5FE3BF57C096F7501D6BEFBA8A3B
+:10B5400005BCAEF8702D8D8E5B83E3413F3FF9F172
+:10B55000AFDAE83B383605F435EAE785790CF533A0
+:10B56000CC5B8FF3C3B89154EA9740EB606DA0B702
+:10B57000817FCF8FF0125D5656029F0E17E7EF7B4B
+:10B58000A37C25F929968FBE9FABF4B7BFFF7D84BE
+:10B590002B767F9FB181446FE2B76FF13DD9E8749C
+:10B5A0008E1790FB965CB2BF91217AB9937896FA88
+:10B5B000F28344235F240A3AAE12FD7AF12CCEB313
+:10B5C000CA28E27650C60B3F13EB72C45CA55D8BB4
+:10B5D000DD1F7008FA3B7279FD14D06503C229EDB6
+:10B5E000611F7A6FE2F4867E9B488F25F4DC930E10
+:10B5F000F6EC0EF093F03C4B78CF85EFF5C95B8C01
+:10B60000E376B8696132433FE1E95C51F73DBC87BD
+:10B61000EFDF95F4903E9AC540EF2857A61FE60845
+:10B620003CA00F9FC7FA118043C17AA43452035E35
+:10B630001C0FF0BD3337338AEFD8F98EE123F00BBE
+:10B640005FCE15DFD995B132A4D73DEFFC35F96E49
+:10B650002F9E77CEBFEFFDC41E7C0DC739F3FD379B
+:10B66000290E38668914B7DBE33CB744366F50A225
+:10B67000CFEFFD851AC2DFB7E8EC3AB36E06F0E50E
+:10B68000AC2ED58753CE7AF08BB747A27FDD65A667
+:10B690007D28F02F56E3799FC7445D216B36E6097C
+:10B6A000FE24E82EBF3396FA49FA09F3998FEBA5E9
+:10B6B000447EBEFA470BE6D177C6352C7008CF57CB
+:10B6C0003FBD7012F9CFF35890CEF79EDD663C5F18
+:10B6D00037F65CDED8F37831A18FF88A3D97F7F31F
+:10B6E000EFC5AF9BE9CDBB57C5F737B43CCECF9F75
+:10B6F000F753AFFE37C1AFB2BEA049D617BC72F93F
+:10B70000FA82A698FA82A83F22EB0BBEE6F505AFB7
+:10B7100018EB0B3E1F1B1F8EAF7BFD9DA47EC675D5
+:10B72000D0FDCF0B2FBFCE263C6727EE77E476BA4D
+:10B73000DF5F7D43A6C4533FF51DA9791C4F4D170C
+:10B740003D067B9C99E78DF1C772E979534C9D4486
+:10B75000F439AF8F90F903A02BD5E3493F30F6FBC6
+:10B760007A99DF97F2F3B1C2AC1ECAB7AD11FAD421
+:10B770003714FDE68FD11F43F9BDD9FB6A37803AF4
+:10B78000FB87D7156B8551F98A5D0FF0E567FAEFF6
+:10B79000D807E789F3207CCC47DF390AB9B8E7FB43
+:10B7A000E353707FF6CF0F5619BE5FEBFDBEDD226F
+:10B7B000FD40BBC19EB3187B3F7BF79BE4E7D558A8
+:10B7C00003F41DDD27AF7C9FECFC5C1670A19C9CF4
+:10B7D0007FE5AAFCE0FF859D97F0DC16BACFCCFD93
+:10B7E000FB0CF24FA609786EDBCBFD4C93D56FA610
+:10B7F00079FCCCEB745108CFE105658BE7E8DDD02F
+:10B800000B7F299DBF3146C0AFE0FB80DF1BC49595
+:10B81000CD0ABA116E792E00709D1BAF2DD7F9BCE1
+:10B8200078BD4909684CF7BDE804D69C8BFD4DD620
+:10B830006E559C5746E7CC2744F145ED64D15E7EBA
+:10B84000FB857BE6E07D3B3FAFD822E0B83F4F7CF5
+:10B85000076D65565C77823D729AF60FC535349652
+:10B86000FBEDA1425E979C88E721C0BC76FBD91016
+:10B870002ED6C99CF49DBFCD792182F18BEE77261F
+:10B880001AF346E87E678245785EABBFE731BF4377
+:10B890009126E06B117AD283E71516D1B90CA42753
+:10B8A0007F9A3C97CE27CFB42FA27DEDC71C13699A
+:10B8B000DFD38588C77AFB89BA7315E07966C078CB
+:10B8C0009E42D64C63DB1334B6ADEC18D587299174
+:10B8D00080FB527AF4DC48B3D037B72772B86E4F8A
+:10B8E000E471DE237926833F1290BF0F93C6CF5DAC
+:10B8F00038E7B25AB14E03FC9347F2B87FF22150B9
+:10B900001AE249FEFB316537F907AD1B8EBF8BA2EA
+:10B91000FA96019D5A93BD4B35F4FBEE14BF23A656
+:10B920007550FDC3967B527D58AFD36A735662BE85
+:10B930003494C7F3444DE2BB0FA048DD0E786FCBC3
+:10B94000B41CEA9751D54379D69E158CFCAA3E7C4F
+:10B95000FA35F03FE0FB496CE3791035BE2EFC0E62
+:10B96000D8E357A96E593EDF86CF014E45F005DE7C
+:10B97000BFA922FA3B4F457BCBF6E379962CA8F87A
+:10B9800078DAD24BFC3E5DF8F34D7B2B6F1D0170D6
+:10B9900015750D23361EB857ECD3642488FD667EDA
+:10B9A0009E6F6CFF81D81FDA4987BDDFA9C7472684
+:10B9B00088CFF1BDB149B4EE23224FC5847E18195A
+:10B9C000237FA3A3F240CFCB44BB49D417E2191481
+:10B9D000FE0A9E06A17E195C3E7C4CFE71B9BD9E9E
+:10B9E00045FF709CAAE8B8A4A7C6451F47E5109676
+:10B9F000586EF5B5D443BF8353F9BEFC482DB20F42
+:10BA0000E57DB4B896892B9BD54EF85DB934F2BA72
+:10BA1000B90053320115DB15CE152D38CE0D4A84F1
+:10BA2000AEF933D7B4209B5D9D5F24F241C1F1286C
+:10BA30009FADE3F9F7D22DA37C3E273C9A3193E7E3
+:10BA400071A7CFB4521DF6748D9FEFC4B460C11DB1
+:10BA500020677754F3FC31B6AB75F919B95F7204FE
+:10BA6000E29B9D71FC83ABF3B95D93EF3789BA21FB
+:10BA7000F9BC389FE7CBECF9134EE771F8685FF833
+:10BA80007C9EF0D34A5849CCEFD1FC350FFDAFCAAC
+:10BA9000DFF6A7278CCF859E98EE7FD44CFEBDD0D5
+:10BAA00017522F07443D54973897E5BDB11CEFEF6F
+:10BAB00056CE277D713B6B267D7E070B9911BFBD4E
+:10BAC000FA7FA2CE3F8279A6078CFED28C99B17EF6
+:10BAD00015E75739EF9D41E3F369D2EF9D68F47B99
+:10BAE000ABFFEDEB54B28B594F375C1A10AD7B6A4C
+:10BAF0008AA97B6A14754F4DBB171CCCD4D53D3534
+:10BB0000EDE5754F8DBBAF54F7D443FB4F47CCE108
+:10BB10007DB82F73643E8804C0B95FD4C91CC03A95
+:10BB200099F2285F264FE3F959605FDA67C97526F5
+:10BB3000F9909FDA4CE594CF6D7324FBF4F9D3951B
+:10BB40004B81EF74795C59E774A49FB8B83C9FFBB4
+:10BB5000C1EB159E4F0FDD69A53830B32860D8BF03
+:10BB6000C854D951CC4B9E167ED07A912FC1FDBFBF
+:10BB700061700D2BDCBFE97D1FBF9FC23C668C3E10
+:10BB8000CA4CF7D1FE4166CA10DA0798B9B76C1BE8
+:10BB9000E91BBBCD87DF07C8F16706B768587FD4BC
+:10BBA000B4778B56638FF2DDF87CC1AF492C09F96D
+:10BBB000B5372FB82B81F2829FD80393F2E1FD7A3B
+:10BBC0004B642833F233DDEFCFAECD13FC621E1B86
+:10BBD000B8730EC073FE6D0BCF8F3DC8485E5FD843
+:10BBE000934A794D6D1A23FBB2BC92F1DF8BD9A237
+:10BBF000903F7732959F43B47C2A233B782E6D0289
+:10BC0000D16F3E0B1FC273866A37990DE709DDBFFE
+:10BC1000CDD8AE671D646FEA77F4E167D25B523F1F
+:10BC20003630AF8A7AA8B1D3F83E1B68D48F65C28C
+:10BC30001E0C9B3EAE05EB3C8699B8DE620FFA7295
+:10BC4000A651DC5DCDED287B9ACEAF3A9F7C4AE5CC
+:10BC500072CEF5F188A8D634D8A511C2BFBA51E387
+:10BC6000BFB320FDA511E277170E98F6AAF41B3F8B
+:10BC7000029EE1E23DE9A7497D2DE952390A7F3371
+:10BC800002E2F07CE1EF14B242A42B8C4FF2A060F0
+:10BC9000A0C48F4CA6DF6F182DE603BAF3F3EB4C6C
+:10BCA000D630F251ABD24C7ADACA84BE5682A4970F
+:10BCB000FF3D1452910FAE63CDB7E1EF818EB176A7
+:10BCC00025915F6A0FFE44CF272D2C92BF5331F090
+:10BCD0000B3D3F93FADBB8FC22ED4AE43DEE6F4C9E
+:10BCE00066E007C2BCFEF7B91F7440E1F122F88399
+:10BCF00007305EFCAD6912F1C3245806F61BEF3421
+:10BD0000D2F966B7B13DC9DB870F54FDEF5980C446
+:10BD10006908CFE412633FBFD46FCCA8DF0AD8D73D
+:10BD2000BCAE7EC5A1EF62DE2069312B413F063CEF
+:10BD3000475FBCDF2BDD85F68298A0CFFECAAEFC44
+:10BD4000117DF757CE8B3CF1F5AC7BEE0EA52FDFC6
+:10BD50009C3BB85875EBF84BF2F34BA21E43794D60
+:10BD6000ECE30EE7F9C2A89DE77C53215AD723DF05
+:10BD700041FF3F483D207E77E486DDB608FEAE4EAB
+:10BD80009918E77AE49FF2A85D8F98EC5E4B21F258
+:10BD900089AF4D55FBFAF3AE342FF1CB30939FF8BA
+:10BDA0006504F3A5239D46593B5A34847FCFC89C34
+:10BDB000A0DDC01F7FCC47FBA7007F503EAB8F7D2F
+:10BDC000343E8FE11F49C7C3C28FBE9979298E982F
+:10BDD00028FCE84801E79F2AFBED1ABEFF4621CF69
+:10BDE000378CC38D47FA6ED56817ABAC463E88E5F5
+:10BDF0002F98D1A49F3796DFFAE39B01C837D22E44
+:10BE0000A65F996FBEEA9F6FBEBA1CDFC4F28BD4E7
+:10BE10002B3B6DCE2A3BE6B76A15D2C7C3DE1ED8D0
+:10BE200082EDAB1A0AA85E6667AA6F3F3D6FE6CF48
+:10BE30008777F955ACA7295A249E1704AAB0DDB418
+:10BE400098EF678C38C2EB6D063EC89F972D6BDE6E
+:10BE50008FDF093685F8FB2F9D6EA5EFA5C2ADE2F9
+:10BE6000FDCAF62A6C37B5F1F74FE2BED4B55827B4
+:10BE7000176EC1FB835717F87858CAFDDA9B049FE9
+:10BE8000EE5476EDA7F7DAF97BF30E5913E977084C
+:10BE900085DF7AA358E74D9BF83A333EBE857E97FF
+:10BEA000744E4F88FCA74F4DF5F4BB37FDC59F95E9
+:10BEB0004A7B2E5E6F467D8287795981AF0BF9BE32
+:10BEC000E5569862C400EE0FCAFD3EAC3FD0D71BCA
+:10BED0008C18C0EDBEECE74AE3DFB5B1C793295F2C
+:10BEE0002CF723231B98827A19D728FC80B8FB9360
+:10BEF000371735D3BEE4CD03E4BE64B786E7B29707
+:10BF00005DFAEB847879963162DE53A29E42DEAF11
+:10BF10000D17D0EF8CED4426A1EFF29FFA3DB5C589
+:10BF200039E34C7C07B7B380B76F19B0E5276D10C4
+:10BF3000BCCF33356B782E1BCB57E83BC07FED620F
+:10BF40009114475FF86FD658C4C2BFE323F8E7B631
+:10BF500058B6F2EF31B95E9A2ED5CE984124A7B7E4
+:10BF60000B3ACD1820ECD330360CF5CD7441B73BED
+:10BF7000ACE0B7925E6B37C7C8FF7706A0FC3FD630
+:10BF8000AFFF6C7C1EA31F6AC5BC7385DF3C1F7F9F
+:10BF9000CF54C5F3E2B9FF7CEA31EE37DFCF3A2860
+:10BFA0001F79FE71EE2F36C0F2905FFAFCDED77675
+:10BFB00063BBA123F6776643347E9FDF712DE5795D
+:10BFC000DDF38F3554607EAF76E3DB943FAE95FAB8
+:10BFD000226CD417E060707DB1E16ACAEB98ACFCCA
+:10BFE00077368781BEC0BA9461586F0AE30F15E7B0
+:10BFF00000ACC057C4F7FF03486F4CA47A541A4FE3
+:10C00000A57DE0B7FDDE287DA4DD88D51765325F0C
+:10C0100033308DF259527F94093F854D8C8D1FD757
+:10C02000921C0E13AD8D92BE220E927E07BC4F7EE7
+:10C030004797C91E3699F47E4698E4B2DC0AF68228
+:10C0400044C96765E23C81183A6FC2755D268E323D
+:10C050003E8FE10319C754083EB893F9293E7A513F
+:10C06000F0C1BBEFF1DF839B6E5F447CF8DEFBDC4D
+:10C07000EF9471D4B78F9F22FF50FCD44B771BF8FD
+:10C080009349F8BB169306ADC3FDF44E1BFFFD6B41
+:10C0900085D3D975E7917C7D7EF15DFC1D17DDEFC1
+:10C0A00043B44C4AB0E23E628B99C717D3267F5007
+:10C0B000314BA73F86A45746105FAD4AD7F7FE84A1
+:10C0C000F1C69BE23CD6BD9944F70B5DFCFE854D65
+:10C0D000D7F84270FB73B338DF4A699E8B25541240
+:10C0E0008EB9E2775FE6A9E157BB713F5609BF58A9
+:10C0F000AFD0EFB4FC0EE5B2CE14B1F0BC5E17E5E4
+:10C10000E9E5F8FDE72943145F5B5EE7F6B14749CF
+:10C11000F4F13C6FC8F0FB3FBFF3F27C943F2FF08B
+:10C120003ECE23ED5F6C7DC2B10537D377AE7F6322
+:10C13000FE14DC175534FE7BCFB1F3623DC2725D55
+:10C140009EFA982DFEFEC129A16F4B105730EF4388
+:10C1500039FED338FF2911179E12FB63A71C7CBF41
+:10C16000EC6F03781EBCC4CBDF4B14D753623FED9A
+:10C17000549A319E94FDECE27A628935B05C47575F
+:10C18000EF868466CC4B641689FA93458CC74F7B47
+:10C19000520DE72E64792B4BBCB8CF5124CE2DD84D
+:10C1A000C3ED32EE63E33EF313D941133EFF3FFD8F
+:10C1B0002524DF00800000001F8B08000000000025
+:10C1C000000BD57D09785445D668DDBEBD857487E2
+:10C1D000CE06618B9D7D0F9D0DC3269D8428B86082
+:10C1E0002780A06C0D0804C8C6E27CCCE8BC3406ED
+:10C1F00011F95CE2382AFE2E7F83E0EF366384A0DB
+:10C200005103D32A8330EAD820286A465B46013599
+:10C21000242D2E836F783FAFCEA9AA74DFDBDD6CAF
+:10C22000BFFABD47FCACD4ADBA75EB9C3A7BD5A93F
+:10C23000345A897D7B3E21C4EAD34F2D20A44F225E
+:10C2400033DB4DB4D4D1923EEF8B6265B65522A458
+:10C250008C90C1D69A6C6B227DBEC2A7277250BD4E
+:10C2600086D6D3A0EEC8B6D27E7DD3453BAFDFC322
+:10C27000EAF49F860C226401FC66A5A5D1E4910B2B
+:10C28000E9EF1B743DBE6C6C276753099164E22291
+:10C2900071B4924DAC0E333C1D673996478B28DA4A
+:10C2A0004EC769D29B364823B1BBC348C79BC3C79F
+:10C2B00023C3CD5A187F361B8ACCE9DAFF93144387
+:10C2C000C85C23593F8CB6CFEB1AACA7332075312D
+:10C2D000AE4C0BC04D265A8ED1EF4AAE68F96C3485
+:10C2E0001D1BFE4D082D09D19263627E08878B10BD
+:10C2F000807B8417E1DA58E14FFE8F5242FCBB0C81
+:10C30000962DF43B0D5D6F1D91285C0D02BE0E2530
+:10C310007C651C9F8418DD5F1809B99E4864201D48
+:10C32000A7D3E42C037C36187D384F3AA2DE41D7E0
+:10C33000C575E7B858847F307D9FCEE7A5163BF9D9
+:10C34000A72E80CF9516067FB55C5FA54F20E4D45D
+:10C35000CDC462A08F56EE5FD86AA4F59577110B15
+:10C36000FBBA5D4346D1F139BE22CD2FD1A1215672
+:10C3700023AFC367670E20D6EC407D88334E51A7AC
+:10C38000E31298C7723EEEB0BAA18AF74734A72AE3
+:10C39000FA5FB62657D19EE22A56D4D3368C51F492
+:10C3A000CF68AB54D4B3365DADE85F44D206120A11
+:10C3B00067D33E99B8296A73DCB58AF6BCA76F5279
+:10C3C000BC7F9C343F348EF6EB888A2924948E5AA5
+:10C3D000A362B640495C766F3EC5CFCD1C8E82F617
+:10C3E000058A71BE89B9721FACEBCDDEC5D7124A82
+:10C3F00057233B9729C65D2ED7B3756BD31DF5D157
+:10C40000F79AE90FE0B398F8F70EA3F4D1E8966C29
+:10C410001EDABC64136B17EF2DEDDC8CEF2D752B42
+:10C420009F2F7F5A59775592EC66CA9FBFB59A13D2
+:10C43000901E8692A16783F82A4007B413FDDEA9F7
+:10C44000C764B72105F093F5F038C48F8EB8ADA15D
+:10C45000EB758A109B07FA3F6FB6B9687DC9FE85F8
+:10C46000381F4392920EA2AC4A3A88CE56D281D956
+:10C47000A65CF781E5CA7557E337D69E7B4EFCC6AE
+:10C480004F52D285C06B39FDF939F1FA24E0333AC5
+:10C4900080CF923DF65613E2894C338E02FCB1F9FF
+:10C4A0001A884306394712A89CA1CF6D6C0872D236
+:10C4B00062726928FDECB04ADA63C6C038455ACFCB
+:10C4C000EB00CF7AC945E0BD28E24E0279D15AEEA1
+:10C4D00049F6D075293636C3CA912F4D8E97414EF5
+:10C4E000D6EB3D85D02EC6FBD2E4C4E73DD23B8BD4
+:10C4F000098597683D85280F8D04BF2FF0386A00A5
+:10C50000A3E3E5C48172F8254ECF5F7C5487785C45
+:10C510004C9AF7DAE9F7BEF998E177297161BF45DE
+:10C520006D4A3C84E04F85374A3656F86E13877B58
+:10C5300019216E4D5A283EA52EC9632E0434740964
+:10C54000B9ED3C5BC2C80EF03986F4FF43F92DF01B
+:10C550004B3B48C1F209BE671914F89EC0A7905B17
+:10C56000E23B06D22C27011FA8E418C956AE1301DE
+:10C5700021310AFFC37FAF52196A8CE31F1B04E30A
+:10C58000C0E409B99C7F872C7026019E8CA40DD72E
+:10C590006FA364DB20D3EFC897A5B4128ACF128BA8
+:10C5A0005D86F52A23DE59F0BCDCD8DEAAA5435D02
+:10C5B00046CE58909E063FD570363E008724E072E6
+:10C5C00049444BEBE3797DAA4BF23D9A02F0BCF56E
+:10C5D000137C773C2FA74249D78F82F9CF4FE8CB06
+:10C5E000E324EB08F85EEDAB59894037EBA566A272
+:10C5F0009ADF91D7E838B2C61F0FFDAA8953CBF452
+:10C60000AE1BF5CD5B920FE77D03B1DF01A5D06FC7
+:10C610008DA4FDCA59B4DED841F5560C94511E992B
+:10C6200096A453854FA23D0A750D8504E87B39D445
+:10C63000C5BAA704DAB12E87D6D7521886C49D5F33
+:10C64000BF3F9C62E1FAD19FC9DA997CABE3F8AABB
+:10C65000137ACBAD9C5F37FC328490BFEA294E8AB7
+:10C66000818F8C2ECD40425253385F169242189FD4
+:10C67000F255660A1D7F501CE5432998EF587FD17B
+:10C680001EC2772AF849335DDCD114DFE652BD9330
+:10C690008ADC85C1F05E003E841DB10CFA02BC2923
+:10C6A00056AC370CE8FEC00ECDA5DE64D0FF629D0F
+:10C6B0009AF4C409F618694FC4EF8AE757A7683897
+:10C6C000BE283D5E009E22AF433ADA43621D2ED45F
+:10C6D0001E1A1BCFE62FF0E708C5F734053E09C543
+:10C6E000678102DFD3C2E29BE3E36499F72958270D
+:10C6F000D97C6810E0797692E346E83FE288EF98CB
+:10C70000A409CCAB5AEE79EA51D0639DB20D78B949
+:10C71000713C93738DAFC8C8FABD5D06B744C7A915
+:10C72000EB7C13EDB39E162A487591F1D40FAF0A36
+:10C73000DFA1F860EB28E059A1827FEE81EFCC7396
+:10C74000AC08E72DE7C1C32DE1F0F0CD6FC83C4741
+:10C750003EC0973FD0971FF86E315FF7DFC7386E46
+:10C760004DA1DF2F7D7F780CE0A75AEEDA3B14F065
+:10C77000B05AB219E8772718882B8AAEF39035554E
+:10C78000E49F74ADCA7DCD360BC547D270934DA6DC
+:10C79000F8C8BA4576B8E9B8FF58BD2A6E212DBF52
+:10C7A0006EA19FCEA0CF258D03E98D6CFFF4777429
+:10C7B000BC2CF36CDB465A9B63A0F3A1DF49F94D17
+:10C7C000B4278DCA89BFE88911F84D97DA7C703299
+:10C7D0001DD71F2BDBC00E4E90C944A02F81E784CC
+:10C7E000680687785EF1F856C9670A3C9FD0EA2F41
+:10C7F0005949CB19B0EE6501382754F94BC0EE11F9
+:10C80000784E4863FD89D69F5C1BC41F65800FDA94
+:10C81000DE0D761DC56763A27E3DE8C15E23AB13C6
+:10C820007B36DABFAB8D8C3FBAA392DDA01FBB294C
+:10C83000AC5E1CCF6326A620B918651F7839859B8E
+:10C840001C90C9365A7C6FB10F8C457C58D838DCA7
+:10C85000DEEA256412E069F5E4CAC171B44C6C6586
+:10C86000F851D3C9AB29CCEEAF3F4D19AF24F0BC82
+:10C870005EEBD15B4CF05CAF787E94E2CD6508D482
+:10C88000179C48BF92A09CB1AD87FE0B374413574D
+:10C89000907DD5C1E711092F8DB15AA2A5F86894F2
+:10C8A00088E35CFD5EFB6F19F1AB9EFFE7BC3DB119
+:10C8B0002A3C7C47003EDA5E75E7B50F83FDD9E878
+:10C8C000D511037DB4FA958AC124CC78FD783E3D1C
+:10C8D00096B8E383EA5A1FE2A3F1F415F8BCEACE56
+:10C8E0001E3DD03D8C63A5CF5747D907DBCE81E7EE
+:10C8F000323E8FC6D3B1C4151FFC9CC993C0F80942
+:10C90000D8FE2C2090D2ADAB53766FA3AF3EBB4F79
+:10C9100033694B98F9EA5319FCB9895AE4973C0FEB
+:10C92000B16F0EF37DD16F501C95D72686E79A82A2
+:10C93000D0F97554FAE6C2FC2F9F48ECE1BE779A15
+:10C94000D38B9877479C6F31A7FBCC1A7350DDA22D
+:10C950005CC7442E173AAEF625C3F8BD93991F1F46
+:10C960008A2736CF51DA6609F05191E42C02395208
+:10C970003F8356289D0C9EEDD138F3037C1769DD6B
+:10C9800003F8A6FE57C9B9F0ADC77631DE570739AF
+:10C990005F12BB49A2FC349FEBADF95B975F4B651F
+:10C9A00067BF1FF3D526EAC7D04F7C459ADF3443D3
+:10C9B000BD4D423F658193903554EE2CDE56B21E3C
+:10C9C000D4C5FC2442AE8863CF6F83729D2EA06FC6
+:10C9D000F1FF7612AC1FC5F76FBE5B69BFD691BB86
+:10C9E000BF05FBE7AB834C3E508D867EF8E23F2AC5
+:10C9F000C7ABDB7ACD7198679DCA0ECA02438FDA46
+:10CA00002185A9DC4F1B4546811E58B9ED3B7D8C25
+:10CA100035321F7C4DF93D3D03E4A505CB8A547B9F
+:10CA2000592AC4190EB0793A529DA353219E72809F
+:10CA3000CDEB54FD29A6271E4B40FD6400614E7FBF
+:10CA400035CC32BA5BE93CEEA4E2248AE2C76060EE
+:10CA5000F690B0036579951C43DB477FB93A0ED653
+:10CA600037E1B9AB26C17889CF45DB019E8D15F63C
+:10CA700022881B6CAC31D95AE99046FA3EE80FF790
+:10CA8000B3A3DF180A5642FBFD95C380ECBA5EF7EC
+:10CA9000405C6583E6DBBDC368FF0D57105B2B0967
+:10CAA0007CA7A9ABE645984FF234A66736A6D88B8B
+:10CAB0002C41E3126ED73572DCF5EDCABA6F2C5DEE
+:10CAC000DF47F7A1594DE14B1D08722397B075263A
+:10CAD00067289E289DC0B783EDD71EAAAF4856A0F1
+:10CAE0009EDB2E7974149E868E1735A00FEB6FF7A0
+:10CAF0000C9A057AE919AD6D4BD0FC12FE32A4D226
+:10CB00001A13D047B3240BDA0BC23EBF91887FF9CA
+:10CB100048373339DDDCC8EDF259D10CBF0B882D15
+:10CB200019DEBBC948623494A56655B597A1BE5AB3
+:10CB3000AE8B053B096009B7DEA28C145F6A7CCA24
+:10CB4000EC92E8BAF74AFE4C18E46B88F9B03893D7
+:10CB50007B4B4AE838EB5399BC68CCE476623AB137
+:10CB60009B29DC8DBBB3366FA44D8601741D8B51A0
+:10CB70002E19CB8BD14E3682FFB3F4B5288F141308
+:10CB8000C00BB1D88B34102FA81D5EBC116CD32301
+:10CB900054BE5006EBD5F992918FA9DC91A8EEFB1B
+:10CBA000CF2D936BB494EE1A87523B8CD6DF4D9DFC
+:10CBB000C1EAA9BEC51A5AFF614B33ABE7FA8E41F1
+:10CBC000FDEC965B6BB4942F1A8B7D8B655A1FFA24
+:10CBD000E45DAC1D1C424A58594FB6D5B8E8F85F21
+:10CBE000C772FD6EF3CD05FA697C354BB33108DEB3
+:10CBF000F83426B7BE8E62FDBE4E21F36A01DFD93E
+:10CC0000BE4C98A7E8F7AF546117B76129E014EF5D
+:10CC100091A4F0E3FF99BFB7B48ADB25D16403E0A8
+:10CC20008D2E932B86E27F4F57D616E8FF406A1C65
+:10CC3000C7171DA734308EC0A3184F7C7719E85D45
+:10CC400090C73A166715EDAFA532F949BFB30EBFCD
+:10CC500093CFF0DF583BBC08D68DAE9796AF979632
+:10CC6000F9AB9BB13F8C1B5B88F2BF444BFBEF39A8
+:10CC700043FBA704E6ADA68F7D9C3E96B652418845
+:10CC8000765A1AD2D18468661F9252251C43399E67
+:10CC9000E3D362199CFDEB3158C2EFB4723C0EA78E
+:10CCA000782FB878B83FE6F3F9B9E10E5A2FBB0CEC
+:10CCB000ED9D395B82E121E47EC5385FAF55BD57FC
+:10CCC0004E1910E6119786EFDD19458CF89C6CE93A
+:10CCD0007F2FA590D9A560AF3670BB9AB8AEC0E0E3
+:10CCE000423D971A0D1BBC7A2BB4B74B7637D067F1
+:10CCF0003A850FF05B7B6D2987CFC2E1B330F8DC5A
+:10CD00000A3A2587FCC9D3CCA1F4DB8FF7FEF1F2F8
+:10CD10008BF9780ABE0E371EF047A4F530A5FDCC7E
+:10CD2000EB21E6A9C2673F9E55F313F8047EC6F7D0
+:10CD3000F295F4D84FCFA9621D557C9D7289DFAB67
+:10CD400060EF35FC96AE23D82756253D3774A4688E
+:10CD500016E407DEEB84B52C0BC4E946A6717F6FA1
+:10CD600038190EF2DB55C9E2A9AEED065BAB15E34F
+:10CD70007B2569E1E37BF85CEDEFF5C5EA89847614
+:10CD80009132DED09768F3DAC14E3D496CDBE8B8EA
+:10CD900063557607ECDB6C3705DE0BE81365DDC504
+:10CDA000F920347EE44F86F9951A2A77586D845C11
+:10CDB000F7E453289F4B0756AE4AA1F5DA279F6642
+:10CDC000F56195DF418866DA93CFA03C2FCDABFCAF
+:10CDD0002E15EA69CFB2F609F61D32EE383C5B3308
+:10CDE0007148C07E989E6665F6479586001D19E4D9
+:10CDF0001536D093029F91CA5283A6399CFD3AB74B
+:10CE00009F9FD9BE4639D7CFE5C29FF76915FE7CF3
+:10CE10005F8CD1250F847D2EAA4F29BC4BD39C0B50
+:10CE200001FF4DD13D73C114BE3DFA533DD843922D
+:10CE30009DDA1B101FB15AC86C3A4FA967A303EDC6
+:10CE4000C06536A316F1C9E35514B6B3749CD77602
+:10CE50003F73EB30F61907CC6334E7FFA6DD3FFDE7
+:10CE6000F809E8D1AF4D3608078EEE7A6415D85729
+:10CE7000A3BBDEFE89E95B13EE5789798F86B82361
+:10CE80007D5EDE69C0F98FEECA5904FDC7BEDF952D
+:10CE900006F431BEDBD30AE2A06FD7CBC39CC1FB43
+:10CEA00057E4B87436EFE2ED8B7E7C7CA927605F97
+:10CEB000527CDC919608F838B318E28BBD8907D70D
+:10CEC000FBD04E1BCEE299FC7D6A9767039F9F22A1
+:10CED000036CB0BFD06766E3A8E39C476A287CF484
+:10CEE000F9783F9D4190DD3CE1B4910A9040BD82CC
+:10CEF000C42AEA55C6218AFED5961445FB55493900
+:10CF00008AF6C9D62245FD9AECD18AFED7D92A14D1
+:10CF1000F5EBCB272BFAD7D86B14F5224FBBA27FAA
+:10CF2000C9BE4E65FB212BAE4349B7A30AEC799BE2
+:10CF3000D7D90AE5E53D6D5503AD2424BE5BEA7300
+:10CF4000B7C2F3B1679ACB3C2434CE4B9639715FAC
+:10CF5000C000EB2207ED135478911F7B35366B70C0
+:10CF60003C77F620E7ABB04E6F4914ED14D9571853
+:10CF7000FDF1B05ED5F3EE9163605DFC04E35F1DEF
+:10CF80007ADFBD6341CFCF91D1EEEDD012B41F3B1C
+:10CF90006616B821067844F2BDF409C8A939D1282B
+:10CFA0004FC6530B17E186BD5009D6C9A980BB8275
+:10CFB0002C55ADD30A45BDDAF25B45FFAB92D62ABC
+:10CFC000DA275BEF52ADD3FD8AFA75B64754EBB45E
+:10CFD00059B54ECF28DAC77FE16B05369AD0E39278
+:10CFE000CD74FE638EB455C1BA8CED76CD017E2929
+:10CFF000F5385B5184EC697E134A0FF5AB20AEF532
+:10D00000464B12967B5AAC1897DADB928DE5BE162A
+:10D010001B3EFF5B4B3996EFB4D8B1FC7BCB242C85
+:10D02000BD2D0E2CDB5BDAB1FFF6964E2C290647A0
+:10D0300080BE4888E7FA87D6C1DFEFD5F81A61E7E6
+:10D04000D59FF6BF514EF60EF0F542FD76D76994A6
+:10D050008B9FA413946FF119ACFC29DDBE2ABD8C03
+:10D06000C914E44F9D6903E881768DBD08EC6B6DB2
+:10D07000BAE60FDA1184DCB1D6916489657523AD07
+:10D08000E362836346347FB00F27E44FA03270938E
+:10D0900045530BF5BE28D67E364D53EB42FDC0F608
+:10D0A0009DA705F69DB5E961F69DFF74C26A867875
+:10D0B000CBC133596680EB208F2FD949916E3E2D1D
+:10D0C0002BB4453AD08B47547684283F335598018A
+:10D0D0009E768D6D3AD829AEAB75641B9517B51247
+:10D0E000F347FBEDC074666FF75D67407FE790C65E
+:10D0F000BE08E89CCAE927005F195BE36A41AFF408
+:10D1000099FDC98087B4ADB1AC9EE87F42B205D528
+:10D11000750CCEE15B2DB5AEFCB070A6C07CD470B2
+:10D1200066A6F3FD068F7D04E85F513F54636F00F0
+:10D130003D71A8C29E01F339E83020FFB81C667724
+:10D14000060839ADBD6C7A50DCC59DAEC3F7A6E9C3
+:10D15000199F919B64F7B6307EDAEE7466EFE3BAFE
+:10D16000813F776334DAE18734A46E7B183C7EC05C
+:10D17000F1F3CD80F0F1970FD3991EAC9C6AC6F104
+:10D18000FA5647E1BE6F9F230BEDA0BE668A25CA03
+:10D190001F7D279A4FEEC47683D812C3FDCD595C0C
+:10D1A0004EFDA96BD50F8769FF4F5747DB50865B54
+:10D1B00072513FDDC43BCF8937A2DD32A7764425CB
+:10D1C000E8A5597C9F6CAE593B08B7CBB4B17A0B3C
+:10D1D0001DE76653D17A50FF8B136AF4B1B45E3702
+:10D1E0007CC57A2897A5DFAF8FA3657DFE8BEBC149
+:10D1F0007C6CA0AC5586FE92EFDD163AAF796B647D
+:10D200002BF39FB85EB32FBFA87319820E018F4016
+:10D21000A714BFE8171EE1F816EF1DE1F85A9CCEDF
+:10D22000EDB602527056B9FFB30CF8A167CEBB99A8
+:10D2300011E2F4CA766EB77DA067DF5DFEB4CE1D45
+:10D240001C4F12DFFD289DD9D787F4C42E811D778E
+:10D250009319E9A370E677B79751F80BBB2C1ADC4A
+:10D26000BF1772DC4B307E5FF68513E5DCE53DBE13
+:10D27000A70E13A4F34EE093F3E9A9A9AEB5A81F36
+:10D28000467F4FF50FC8C533CE4F0FA31CACE372DA
+:10D29000B019E5D79E963558DFDBE2C2725FCB0648
+:10D2A0002E07DBB0FD9D964D5C0EBAB91C7C1A9F13
+:10D2B00077B5CCC472778B93CB41B6BF5ACBE969B3
+:10D2C0007692F33EC093D8C79C6674EA005F7F7D78
+:10D2D000C44064D89FE832209D520E78E2D10438D1
+:10D2E0003763B06CB4869E9F51CBDBFEF557EDF7EC
+:10D2F000AE4EB23F0AFCDD7F5E06ECB3CB22D3CF4D
+:10D30000416235833CD9917E432DC8E78356AB19E2
+:10D31000ECD68EADBC6EB79A75B4BE337D06CA9797
+:10D32000834EABD940EB2F6D9DC1DA5D567314ADC2
+:10D33000BF9C3E93D5DD0437B7BBD2E7A09CAD20A0
+:10D34000D21EE0872A63CA442AAEA97EACD8037CE9
+:10D350007055D2FC89C00779E956A4C3C9D6B57BFC
+:10D36000A07E4DF6666DBC15A2A145EBE0BDCA845A
+:10D370001A2DBC3771F88A75F0DE95E9F76B83DFFB
+:10D380009B94FFE23AA85F6BDBAC057B300FE45661
+:10D3900062601C5117ED42BE8AF35D23BB1C28C797
+:10D3A0000B3B1D28C7055E2AA7D5DC0171BAA64E26
+:10D3B000C922C13CA649FD9BF612B5211ACF506E79
+:10D3C000A172F6EDF4BAB8B514CE26A88FC1FA1F33
+:10D3D000D68697BBDE70FAE543CEA7A0376BE83858
+:10D3E0001F52FE81F368360E5F53D77CF37CD4570F
+:10D3F0004E33E8D7515C5F8EE1E5325E36F1F233B1
+:10D4000093FD63F8CEE791F9FA4BA00FCAB78BD919
+:10D410003C42F85AD9CEF9FA38C72329F52743BD3B
+:10D4200081B4619CF07CE7BC9606FB6F29705EA21C
+:10D430001DCF61A8CF4BD4132F1BAF5D75DE82F8D3
+:10D44000F4B80FDA19F41CE511F73F0630B93713B9
+:10D450008435381D1914EEECB0706B3312CF09B758
+:10D46000B29DC3BD94B8F17C9B1A0EE24C44DE5AC7
+:10D470006E3A84EB190A8F2F3C3C217030FF5D9C83
+:10D48000671171796A07256494811C341388DF045D
+:10D49000CB89C3E790136A79F473C9B973C89B1C2D
+:10D4A000C09B5ADE88735AEA52D873B4EE82737AFC
+:10D4B000AEDD5118A73F697596C2387D95FE1F35C0
+:10D4C000E09F25F890CE7E3FCC7939E041D2B3FD84
+:10D4D0007AFA4626ACDB098DEBCF601755656C41B7
+:10D4E000B9D30BCA81F2E3585A07BBE7F1A18EF119
+:10D4F000F01EC966F413E95CE7C40CA68F424BA288
+:10D5000038DFD8B7F9A7648C639D87DE23E1A15A81
+:10D510001EE77381BC2F8F4693A747221E89DA7FAF
+:10D520003D1583D08EE819A1D742F973FB893D23BD
+:10D5300032717CB5BFD833A4DCC8BE7BE524283B60
+:10D54000F5CE4DF3C14F1A6D403FE93D7E2E704A36
+:10D55000343B47F51EEC13D37E538E9E4900FDA548
+:10D56000F6377BF6CFAEB41686FA9D14CE890067E7
+:10D57000FDE79A3BE0D9C5FAA1F56B7E24DA78BACB
+:10D58000AE6BCE106DC985F8A5440671517CC4F60A
+:10D590002694655F78E30AADE07F0AFB81FBA7E78D
+:10D5A000398F54EE67F6C28433245B5B0A71A6019F
+:10D5B000B87F2395BFCDFC565E8A7D91716C0A645D
+:10D5C000AEC6E4D6A72ACE23256969395BF68D82DB
+:10D5D0007A2FF1E23E89DA9F7D8BC7A1A85FFB20FD
+:10D5E000D0ED7A7E4E89AE483CD06FF5EF3E9A7B07
+:10D5F0002BCA8128B487FAFDDA9D1A3C67D0A1B501
+:10D600000F1C0F7EED9A0CDB5A5AFFCC9BF8E06B97
+:10D61000B46CB2FC887813FC5BBFE63BC4A7A8F7E8
+:10D62000F0B86F9B8EEA1F5AD6FFB78C7AA89E90EF
+:10D630000DB86EE40DFDCA20BD48DABFEDC7FF4846
+:10D640002AF76A0081A8172BA7DA69BF1AEE7F10A4
+:10D65000F226AB73BF8BB852A7DAE9B83589BCBFE5
+:10D66000EB21561F21DA1F66FD33C478FFAAC5FAE5
+:10D670001051E7E3E588FA7BAC9E22BEE767F5022E
+:10D680005137B3F1CDACFFEE6D3BA6823D22E4FDF8
+:10D690009E0CAE1F8B48113F9FB30FE57FE47329AB
+:10D6A000CA76AE1FE63D23BBF423617D2647BF0B40
+:10D6B000FCDD2EE119BAFADB7418EFFE26AEBD7060
+:10D6C0005590BF22CEB138AACC76B0FF1A5ECADA26
+:10D6D00022F3733D607F10BE1F5D2D9B707FE2D4EF
+:10D6E000DD4CEE47B2DF16AF794DB19E21EDB2C4ED
+:10D6F000FC71D8B8A3DF3B79CFE0CDE85FA47B71A4
+:10D70000FFFC588624F6E949795CE0DC58421AB1FE
+:10D7100083BF9AF03295CFB0C65F78511E2F7E99A5
+:10D72000C57F1B1E7913F5DE02D98AF1DCEBF29D71
+:10D730003D809F5EB317E38A8BD7ECC679FD9F1CB3
+:10D740006E3758FCF9C1F8FC3E14FFA7CF83FFD316
+:10D75000BF26FED571E765A63D08EFB28B3CDFD64C
+:10D760006B66FBA236BE4E4735D6511C5F719910D1
+:10D770003F5FE4CD8C95E1F0B177103BB7F44E19E3
+:10D78000F845A79ACD04D67DF6AA7F143AC3C47D86
+:10D79000D5FEC0CDF0CDC400BEAC9921F84DCF2C44
+:10D7A0003B277E95EDBF307E076B7D7A1BECA31E79
+:10D7B0002138CE28EF517DF0F99889994C0F0FEC64
+:10D7C00064FB46EA735F1333CDCC6EE2FB330DB5D9
+:10D7D000EF8C83FD19C10F13A2493BC4DB295DDB2C
+:10D7E000385DDB80AE05FD06F669E87B61F82B400D
+:10D7F000BF4471AEEF9A4C6E5F06F07A7DE6B9E9F0
+:10D8000056D9FE0BE3B583DAC3B8AFB9330AE329BF
+:10D810006A3CAFE47815F86ECD64FC1F09CFAD808B
+:10D82000E7C49F1FCFAD9956453C42E03B927E52E4
+:10D83000AF8F9877183E2DBB143ED5677339A5F589
+:10D84000E17953F5BA6F0CE5A77BCFC34FF7FE9A8A
+:10D85000FCA4C69BBAACE7FB9DEAE7CF678AF3015D
+:10D86000BF0C1EFF7F8BA7CF697E5DD13E6FCD7E43
+:10D8700045FB7CD701457D9CCF5B05642EE2E357D9
+:10D880009CF0BF09F54B8DB3478AAF4FD9B1440324
+:10D89000FB6FE55E16DF6FC8764A5974DDDED3B8DC
+:10D8A0005BCD14AF9777B7CBB81FE62EC27DC055BE
+:10D8B0007C8EDF8DFBD7A7B752BAF98E1830FEE900
+:10D8C000793D476B2D08A5838AD332B107D98915D5
+:10D8D000C6582DD85315D4520E4737FA2C467778B0
+:10D8E0001E88F2FB4C23D125503E9F3953C2F34F83
+:10D8F00033093B574D4B8F93B64FD1128F81D66B67
+:10D900004C5A8F01F7FD58DEC374364D62D01217A2
+:10D91000B4938478F483A7C1433A5FD92EE379B6F0
+:10D92000E9E56CBFF02653BB0EF4E98DFB6E3F7941
+:10D930002B6D27EB5C65ECDCB6C863FB587331FBE1
+:10D9400080FA2CC6E77D12DF5796743638E7AA7E38
+:10D95000EFE34C06EF1479AD0CE75FFC0708DADD66
+:10D9600082EF287CFB0CC52C4F630CC049749EAC25
+:10D9700018B09FEFAF82FEF587AC8897A6F2B58509
+:10D98000B08E4D13A5CF0D8501FFA669CDF768A711
+:10D9900057CBCFB742FF53475868FCF21E970CFE97
+:10D9A0004A207EE99B0B7C793E3F48CCBBBBC583BC
+:10D9B000F4F469CB3E2CDFBBE2ED32B0337C2DDEDC
+:10D9C000B0F1CB4B8D17883881881B0839F0D96DA1
+:10D9D0005583812E6D595C2E18A561201788969568
+:10D9E000425E8ECA0A91AF63B2CEAD5795EDBFB01D
+:10D9F0007CBD503AAF4F627A514DDF6ABA16F44C93
+:10DA00005F2B93E8776FA2F61EE8D559C455504FA7
+:10DA1000E5ECCC256DBAB1D2A5D3F532D317C92424
+:10DA20004CBECAC5CB732BC22F57C9E81F88F30A57
+:10DA3000621D1AB242ECA115E759B715BFE6BA85C7
+:10DA4000EAB52FE65E9A5E230A7BE0EE50B8DBCEA5
+:10DA50000377DBAF0A778A55E4D1CC953581BC11C9
+:10DA6000384F0C765C9F9BE545D6A5B4C5E0E1CC6C
+:10DA7000727F0CD88D4B77C94887446BD70EA1F4C1
+:10DA8000BA84D36B0FF17C00F4B864DC12CCA7AB82
+:10DA90007B2CFCB9E246DE7F99A9430F702EDBAAEE
+:10DAA000ECD7C8CF15D73FAF8C8B368EBBEA388CFE
+:10DAB000DBA83ACFF35216CF4B2C26C5ECDC85D22F
+:10DAC0003E5597BD2D4411AFEC3DD382F180DD5919
+:10DAD000FE075CC383FCFFD0F5DB97756E7B4ED9E8
+:10DAE000FE2BD3AD6CDE8AF955174BB76B73EDFF88
+:10DAF00080790B793C1B6413FDEEECD70C6E17ECB0
+:10DB00008F9659597C5372B7C27E5BDF4F04E3474F
+:10DB10000B789C33527EBA386F30FA90BB959D37A4
+:10DB2000B0CB902F3A6A9FA30AB62B4ADE69467B98
+:10DB300024E2BE95C8B3E2E7872E54AE89B8DEA8CA
+:10DB400013CD6867D9BC16B487C69C6E7F13F4E307
+:10DB5000CF15EF16FA706C3CC35BA9CF81765EAF30
+:10DB6000CE53F621D809AF4485B51362B3D9FA4D27
+:10DB700075CDD7B1BCC390FDC0D86CBA1E53B9FCEB
+:10DB8000D718ED3AC053B5DCF3E00CA01FAF8CF111
+:10DB9000BDD5BF7FFFCF8F5ACFEFF73759BE43BBFD
+:10DBA0002192FDDFA461F917C555563CE707FE1425
+:10DBB000C4F744BC4FDD7F426E651ACCAF5A1EE7F6
+:10DBC000B5C37C36B1F9445A9FA635DF2AE28B9162
+:10DBD000BEDFB4ABCCB220880F6ECE9684DF613945
+:10DBE000660CACEF85D2C178FF4C85FDF3FFBA5FC0
+:10DBF0003145A6A625D59F05929BD9AF84D9B1B34F
+:10DC00008917CBB9C48FA593B0F3F70B880DCB9BC5
+:10DC1000793EF3811CE74C58973E9D7F109E9F7C78
+:10DC2000E9DFF9403727AF18DB06DB5EBF941DD76D
+:10DC30005764C5EFF7EDFC77329C83399F5C589DA4
+:10DC4000645F9E1D66FFF9EF15F24C966FF518EABA
+:10DC5000891A7E1B0399C8F6D1484A0AD243402E3E
+:10DC60000EDE2CE422ECCF167CAE61E749964AEE3C
+:10DC70000CDAB5D3A741D62A5894E296A1DEC1DAD0
+:10DC80000B1A62DD12AD178C8E62ED2B62DD104730
+:10DC90009F437CC88FF3A82884723E61726F21B1C4
+:10DCA000B37C07E24F053B6C5197919DF727BE74FB
+:10DCB00090EF8511FC9FB7B299DF3C3295C9F39183
+:10DCC00095CA38C53D5C0EF4E6549EC8A6E5A96C1D
+:10DCD000FBBD80979171DE8D0F9462DC9E80FF709A
+:10DCE0007CF46F71BF51BC97985BF900F47B416283
+:10DCF000E7D35DBB0C783E82BE31C81174AEFF40E5
+:10DD00004ED523D0CFCDED928878257E45FE6C8010
+:10DD10009F5C38BF91E07361BC9C3E28C7EF62FDF9
+:10DD2000C5ECDA69EB4C18E37781DD9B98EB7C1648
+:10DD3000E7AF27C404F37FDCE0DE82F6697332C408
+:10DD40002B973C61D080DDF01155B79087F2498B5D
+:10DD500011CB7F503F18CACFA81F0CE5E7D40F8620
+:10DD6000F29FD40F8672D1E922AA2C283FE5D8DF92
+:10DD700064F41D3E4FAB4BE05B7C7F971EBFDF9B87
+:10DD8000E344FCF6AFF72BC40D9B3A2FC4FA87C6C9
+:10DD90009D83DE22CB198617B15FA86EDFCED7B583
+:10DDA000B0438BFABDB0D317B338A8DF816C3DCE3A
+:10DDB000B360E7179887DA6BE9C7AF5DA2204FD150
+:10DDC000B0FA81EC3AC46F6F8EFD04C04DF9FB30A0
+:10DDD00094859DEFFF01F27FE8F878EEA04FF23FC7
+:10DDE000847E800A0E351E045C2FC47A37C2FB2F56
+:10DDF000EC4C0548A8BC218C6F808EA470F0AEC599
+:10DE0000F95E6FF097425ECBF567E5B0E78C7B7308
+:10DE10002A10CFEB04BD093CF1F5BA54BEEEDFFF8A
+:10DE2000E6744AC43D1E203BADA087CEC480BD57DA
+:10DE3000C3F7F73B3BD2DF03F85CFB64926145FA22
+:10DE400055F0DDB01C4627A22CD8A577C03ABDB04E
+:10DE5000EB58FACD265C97F445B47F744E8622FECB
+:10DE60005830FAA7FF782001FB5BE0533792CDD5FD
+:10DE700070FE6496F1F5BF0248732C9F57C3F99367
+:10DE80007949D25E28E75B53AE847327E27CFCC2FB
+:10DE9000EC8ABDC04AD7DA6AD04EAB00E112A40FBB
+:10DEA000AA8CD1B029D85FAFB6C42BEA57250D5341
+:10DEB000F49F6C4D53B45F939DA76817DFBDD65692
+:10DEC000A2E83732CE9F0AFE198503F9816C93F1DF
+:10DED0009C5EC1CE4357E7D1FA94A7A6DBC02C794C
+:10DEE00081B74FD95EE586F5E8A3F8D45303EA4439
+:10DEF000F95D0F3D0083A9ECFFFA5D4FEEB55B2F96
+:10DF0000C2FE8F60F70B39BBBCCB580672F642FDE0
+:10DF100000F5FA8CCE51FA0591E8A69F2F242BA389
+:10DF20009BFD32D916866E08B99DD3212BA71C64A0
+:10DF3000F963172BCFBE0479161FE08FFE52159799
+:10DF40001BA9B7BDB70AE2F4EFCA04F3F1785EDFAC
+:10DF500062F85D0ED03BB979F31D4312F0B90BECBA
+:10DF60005CC82FB5D3F157E470FBA9FEF53B86944E
+:10DF700006DAC9EACF15FDC96DD27A457D5D8AB250
+:10DF80007E77C5FAE0F723C9C5C59BE6EB9D98FFF0
+:10DF900029D9DD61E483984FF51B5178AEEF3A380B
+:10DFA000AF421F35961ED0C23EEC7511F4A8903FCB
+:10DFB00037CAA4395CFB6D392CCE7FED1B51780E2E
+:10DFC000E662C7FD88E212CF19BECCF4E84703BD74
+:10DFD000DAE075BF93CFFB64D9FDBFFF11F6475F51
+:10DFE0002178EEF3642C93FF851DC7351AD0830387
+:10DFF00018BD145A7C1AD02B7D75D12E38D7DFB4BA
+:10E00000D4CCF25F52FD1F18E9D2DF97F3CE1F8DFB
+:10E0100074DD3E8624C820BDDA074E11AD6F7AE666
+:10E02000ED69EBE8FBD7BC11E5D15C023C9BF8BE87
+:10E03000C4C84AC6E773816EB87E81187BD31DA41D
+:10E040005FDF805C00F8A1FE5ECE7B87FE0876F87D
+:10E050007EC6E770C24EEDDFCF0AF2EFC9638C2FA8
+:10E060008DF4879D5352F1F79E36BDE99C7CDE8E80
+:10E07000E76E2E94BF77E4F03CE1C8FC7CF01ABA5E
+:10E080003E4DAFB07B2D4E7565605E6C247DDEB479
+:10E0900049463EECD75F5DF22437EA29651EBAC0D7
+:10E0A0002BB1DB903FC5FD512BC7FFAB16F4E6CA81
+:10E0B0005D5A764824D27736C8C41AF49D17761B69
+:10E0C000EA30CF8DCFBF4FE8EB5D3FC455E4B3726C
+:10E0D0006D18BD47F5B42E01F4748D847EE5E15DC5
+:10E0E000832B014F8725E2B162DE163BA73C950DDD
+:10E0F00007CF4D786F4952369E4F16FEA5F02BA7DD
+:10E10000EF9A9E0176E5071D0B0ED39523C772D2B9
+:10E11000908F661017DAC187631D23202E31859FEB
+:10E120000F381CEBEF01B97C787CB404FBFD74FC68
+:10E130007530BE80EBB0CE3182DD3F21CE25E75E6B
+:10E14000D27D71D5F26D15D7C0FEF66C6201BFF2BB
+:10E150007A99D9B9E42F8C3F85DC6B92BC7130CFB2
+:10E160000339B5A773289E06AFB997C75539DEB4F2
+:10E17000EC1CE285DAB9FDFEECD312BB17C5C6EC88
+:10E18000FFC671DF3C3803F2E4A8DF2DD1F92CE89B
+:10E190007C1DEFFF51FBD9FDFECEFF309E1AEA2F0A
+:10E1A00039E27283E2E46ABFA9DF4E17F6DE367603
+:10E1B0004EFECDF10FF72EA7F5D5DBA2118F5F3DF7
+:10E1C0006170811CFF6A8B01FD9FAFE2FCDDABA09B
+:10E1D000BEBDC0E6C2AFD914F7A32DD1583F04FD90
+:10E1E00043FEA6C37B3D8E3F6EF0C0798FA54FE600
+:10E1F0006C017FEAF808EB73CF433CF0B944BC678D
+:10E200008038D9FBD7717E04FEB252D343FE2F3340
+:10E21000DA114B770C413926D6EFC4E3519847FF0A
+:10E22000D5BEA903215ED6A37911F378886C7281DB
+:10E230003C5EBE250AEDC035166729C05FF55FD785
+:10E24000CD2881EFBF9F48009EBEAE1D18AF0CAC1D
+:10E250006F78FD7EAA2B8DC9817E7DCBCEDDCE83EE
+:10E2600073B76978EE760C8CDF40C4FD8BECDC6D07
+:10E27000B12CD931EFE09EF079E4D7E432FBB15E06
+:10E28000C44FE2893109F8D04910DEBE7BB2B680B6
+:10E29000BFB330378E7FD7CFF32505BD7537BE8628
+:10E2A000F113033BEF17157E1F7B462ECB2B5E6CC5
+:10E2B000FC5E11BF695CF39322AED2984F50EF160B
+:10E2C000B75A4B56D07215C7F3EA54C74D00DFB2A8
+:10E2D000F6FB5F7A07F1F2D86F3E86EFEE3361DC32
+:10E2E00086BCC3F0A7F667161BBFE5FCB4596107EF
+:10E2F0001F7BE4433C6F726C675E21ACDB02D97B11
+:10E300000CEEE5EA357B3FBD9596DBF71DC47551F4
+:10E31000CF3764DF5E6272A51EE08887F32E8EE63B
+:10E320005CDC1766FC7E746301E24FC473FBBE0ABB
+:10E33000EF6F89798AF1C5FCC4F8A2DFFFE2EB75C3
+:10E3400052EF2D04FD9C06FB166581F69331DEC26B
+:10E3500058133C67792D27E3683D886E7EA9FD9DA3
+:10E360009B789CE78866ED2D7A4A7F3DED0FE89C0F
+:10E37000C172F422F775C47CC5B9529147FB9FB9AD
+:10E380003C9E3D828C88907FFB646E59D8FC5B7C00
+:10E390001E29FFB63FDFF607966F2BF26B4BAB34AF
+:10E3A000CDC179B6421E96E6D1E7F9B0EFAFD4EF12
+:10E3B000A52395FD23C9C7F1796C1D4BE3C3E7BBCA
+:10E3C0001EE2EBDC4A3CEC1E42AE17C772BC8BFB74
+:10E3D000BF849DD2C8E5B6C8F31CDBC5CE6D8EE503
+:10E3E000793B540A609E6BC83D6F4979A857C53D7B
+:10E3F0007D121D6B765CB87C612FCEE30AE2C7D23A
+:10E400004E2C5A2829FAB19C481C585E499AB19C56
+:10E4100044DAB0BC9AB463792DF16249723DFCBC18
+:10E42000E76D2CCF74F2120DE8D7D219E1EDE21F9F
+:10E43000CF8B0717DE2378B178B892B0FBFE42F09D
+:10E44000313C1BE95B8D0F75BEE678E2C38B4B2632
+:10E4500000E1A6811F6CC5F3AD55C48EF5EA0BC46F
+:10E4600043B9CFA965F9BD2A7C5485A78BB31C1F7E
+:10E470001B40779605D6A9348FC901B15ED4114BE4
+:10E4800002F9AF5E47F1BC34BAF23B2B1511C3F26F
+:10E49000EE988E79DC2595ABD268BDE0B907597D41
+:10E4A0006CE50EC8F31E99F7F074CCFB1E5959A207
+:10E4B000B3C17D729BA64FA4ED4E7E6EDAC9CF4BE1
+:10E4C000136791E29E2CE7DA5BF0DE31E708930DEB
+:10E4D000E01479E1721ADB5F4D9EE4794347FBED6E
+:10E4E000B23807E595C139734F8C15EC84B5D578F2
+:10E4F0007FD49D7AD65FDC6723E013F7DC6CDF9E68
+:10E50000B74A4A3DFF3CE8F8E97989309F0CCC8F47
+:10E5100073EE94783E5CE5E099546EF4787504F2FD
+:10E520000BC4F72CA9CE1C980F81A478CA17C3B8C6
+:10E530001EEED99E9707EB549AC7F30713524A0071
+:10E540008F0B521DA5D05FE44597C2BA24462E67B3
+:10E55000E7D98BA1BFFAB9C8CBAECE7396437B5334
+:10E56000F419CC37EB2D7A7FBD2F25344FBDD54E16
+:10E57000DC7A942BCAFCF4BE457ABCCFA9D4E16CFA
+:10E580008523CA97CFF68FC27CE13C67158EABF727
+:10E590002517D1F7FE3895E5BFABF3BD77EDDEAFBC
+:10E5A000C86F177CD69FDF7E8AE5B707F8EB9155D9
+:10E5B0002428BF5DF08DE0BB3190DF1E03F59C4544
+:10E5C000D06FFCFBDD98DF3EA1DBC7F3DB3F54E6F9
+:10E5D000B7DBFF7549F9EDC7F9BD6FC78DECBE24F8
+:10E5E000719FD4CA9D6CFF77A5C4EE935AF9277624
+:10E5F0009F94F00BEB387C0DFBB7AD877DBEBAC79F
+:10E6000016E27D5484DF876AA53FC17EA1B89F547E
+:10E610009D07D304FE20DACD1EB4BBD4F9304D8F54
+:10E6200055A13FD8A4B2A36FC9E3F11DAECF08B77F
+:10E63000FF96F077010E13FA677AB43B573EBECAD5
+:10E6400066813AE72BB2EF7912DC9F3C168FB4203B
+:10E65000F86CE90609ED5781BF914F19EC789FF1ED
+:10E660005383D16EA5F636CF6376337F9BD20A9C57
+:10E67000877F21D69F0A76F20BBBB26D54C29257A8
+:10E6800023DE43FDBCEA1EEA2715F7509F82FF8177
+:10E690009D7642E386714691ECFBC6D17AD909ADED
+:10E6A000CD6D0DDCCB7CBEFB8705FE0D7CBD2EF653
+:10E6B0003E62F5BDCF22FF417D2FF19DFC5EE2F170
+:10E6C00011EE2536C85D32DA0FDF6B15F7135FCE1A
+:10E6D000E12CB71237DCF73BA647AB58FF725F1B44
+:10E6E000017B28EA90561147305895F597F3787CCE
+:10E6F00080DF2F128A6F533F3E0D88CFF487119F22
+:10E70000AAFB9E059EFAEF7B1E6E42BA1FB37F875F
+:10E710000CF2E062EFFDFEB5EFF93EDFBDDEEAFB95
+:10E72000BAD5F77347BAEF5BAC7B9167A5A2BF7A06
+:10E73000DD4BF6FD4E791F355F6F17FDF939D7FBBD
+:10E7400007D57AFF1B2E40A37CF8F7981377035B5D
+:10E750004E896672ADDFAF1FA7433FEB3D6B7C95E3
+:10E7600019F89FEB2907D753E4B676DC8777707AE0
+:10E77000B179D93982E223ECFE8A521F3B4F30EA4D
+:10E7800044F8FCA0EBCB25C5FE6EE8FDC52CCF7888
+:10E79000EC19764E4FBDEF2FF2866AEC51CAFB1B87
+:10E7A00022E41189380EB5E3891EEC780DBBCF2E1B
+:10E7B000CC7DC79BE4B4E03C2227C677A619BDC92F
+:10E7C00040CFF129CECBF21303F9461320AF4842D4
+:10E7D0007F90E7E124DC0071C73E48B21D4AC8675C
+:10E7E00077C7DE80F70624108B6F1473777176F984
+:10E7F000CE6C18E7A864595F42DFFDFB986F924129
+:10E800003F19605FBB18F77D73A15D7D4FBF4F63FC
+:10E8100045FBC2F53B09FD876F60B0D141FCBA41B1
+:10E82000C7F31A557FC780FB53E2EF181CA543D4EA
+:10E8300051B93DA793E5512F4FEAE17E18BBC7754B
+:10E84000E17013DEFF44EC2536E6870BFF6A987C07
+:10E85000317AF37CE78B96277DA5F073C9F3F11726
+:10E86000B49F18809B8D7FF4AE68D43747EF1A8130
+:10E8700071BEC0F8BDE8F7CF69569E339EB7E62358
+:10E8800005FDCD777DAE68F725F875C328FCBE97EA
+:10E89000865C398BE2EFE44EC328E033BA6EF3F2C4
+:10E8A00083FC7BDF3D5913991D703E38BFC17974DD
+:10E8B000F373A202CE4F5B8E60DDD7E2539DE7710A
+:10E8C00029FC5251EADF20784F8E5F1A600B1767E0
+:10E8D000399ECFECF66E9E07D9CDF320BB79DE6270
+:10E8E00037CF53ECE6798A227FB45B2276384F31FA
+:10E8F0005B723C315FC2FCD1DB00CEA665FE42C834
+:10E90000B76B1AE99B2BC9983FDA925F16367FB432
+:10E9100010F2DE5F797EF60D60D79F18E0C27B496A
+:10E920005ECC9F7903D8F527F48C3F5E7FBEF2065C
+:10E93000C81B7B7CA8F32E18E74B49F6203DBF226D
+:10E94000E17E2AB1FBF4B5E7C82F6DCB67FB0BF76F
+:10E95000E7B37D0C513E97CFE4D9EBBCAC96EFCE3C
+:10E96000C4BC9F4D06CCFBA1DFB16B82F6FFD5F98D
+:10E9700059C57F3178406E8838CCD67CB6CF0A79BD
+:10E980005B30BF84FB0C2C6FCBE74D863C2F38EF00
+:10E9900003F7669043C4CEF2C0D8FD7D621DB6E693
+:10E9A000F3736770A17E69204FAC61FFD14F418E38
+:10E9B0005C97EF7C1AF99FE72F35C4BC8EE7265E83
+:10E9C000CDB7E27B74BE083F9507EB24C473481CA7
+:10E9D000AE3DBF2C34FF3D12FC2717791FCA4F09EB
+:10E9E000E44F05E54DBD0AF310708B7904C6393745
+:10E9F0005D8B785220DE756726F049B78ED97BE2B1
+:10EA0000BEDA62599A574BEB6F71BC88FE9FF2F5E4
+:10EA10005C9DEAD80FF358D6CCE26EA2BD4F6AFBDC
+:10EA2000CDC7B06EFB4D28EFD4DF17EFABE16DD84B
+:10EA3000BD1FF142E19D0B7006C1FB617E507CF071
+:10EA4000E4AE0F1F02945F2A9C179BCF6C18C0EE98
+:10EA5000450C8D4BD3850DB2A70CE2FDE1CAFBC678
+:10EA60000CF0F711E8F73AB81FD2C1FD904E1DFF28
+:10EA7000FB352ABFB4C3CBCEF57424E9F1DC0EE13B
+:10EA80007F6F41E8E1D507D8399FD52904DB617E46
+:10EA9000C00F926F2FEA85FE7BA324AAEF285D7C2E
+:10EAA00063719202A06BE72AD413F265261BD0F59E
+:10EAB000F6BF5DCDFD2BA677CAB89E298371008E67
+:10EAC000FC81A87F4AF97747199BD1BE1D4D5C3C5C
+:10EAD000DEC2E31277ED55F865FF17386EB02750A8
+:10EAE00068000000000000001F8B0800000000000C
+:10EAF000000BFB51CFC0F0038AAF9B3330E4593198
+:10EB000030CCB1666060B56160683047C8BD114700
+:10EB1000B0A9897FCB53A67F932403C31620DE06BA
+:10EB2000C43B2449D7CFAD8D6037AB3230F000F90C
+:10EB300021409A558381E1B51603032F903F03C806
+:10EB4000DF03C42780580528F612480BAB31307C10
+:10EB500001D27C40796D20FB8A1A76F3F9B5F1DB9E
+:10EB60007F5C0395FF138DFF401DBFFE2C4D02E11E
+:10EB70004B401E1BE6B3273F3E8228D03B10F830A7
+:10EB80005ABA7E6CC2C0F0CB9481C10E9AF60F20A7
+:10EB9000C90700C59E9840E34D8F81E1961903C3D4
+:10EBA0005E1CF9E20450FE36503EC61CBFFD0ACC86
+:10EBB000A87C615E4C35DF9810ECC942A872C7840E
+:10EBC00031D5F38A323000002621667DD80300005B
+:10EBD00000000000000000001F8B08000000000083
+:10EBE000000BE57D0D7C54D599F7B973EFDC99499D
+:10EBF0006E269310C24002CE2411A2243040C09849
+:10EC00004CE0E68B041270F87829565A27E8226DFA
+:10EC10004111DDAEEF2E2DC347435454D8A26BAD46
+:10EC2000BFDD812AEDEE6BFB0B162D9B049D8480CE
+:10EC300068F88868B5AE6D376AD7061B6C88C1D294
+:10EC4000DF4BCB7B9EE79C93997B33930475B7FB9B
+:10EC5000BEAFFCFCDDDC7BCF3D1FCF799EE7FC9F88
+:10EC60008F73C66AB111D775845C85FF1610327F29
+:10EC70002221646EF42A9E57D8492879262169F604
+:10EC8000435D33320859A8C9BE1A0F2113EC0D9DFC
+:10EC9000A488903262F3D8BC84B44B3FEB9A41EF26
+:10ECA0004FA4587D3602FFDD4BC83C4236DBE99F5E
+:10ECB000B4FC894BF44ABF3FF1474B98488454CB8E
+:10ECC000F54482EFED122FAF6B4B3209A922ECBF56
+:10ECD000F99748152D46AADC77D593198454BA685C
+:10ECE000293B7B7795952784962F25AC7EDD6E7C1E
+:10ECF0005F4A765F949D70D72F070A697D5754E36A
+:10ED00007B77CD6F8913CAC53C8771C01F940653AA
+:10ED1000494AC687C9F4EF9BC84D57657A55C61155
+:10ED20007273942EE62B212142C613D2C2BF5748DC
+:10ED30006006DC13F23CB69F2EE858DB43DC74DC43
+:10ED400019C5C457430738A1566F07BA9456A91E70
+:10ED50001BBD6FAF9E37B14723E4BB179AB3480181
+:10ED6000FD3CBC01E998C1E9D87EE1C577EFA6DF9B
+:10ED7000FB6B89CF46EF5BADBE898182E1FDF1D7A8
+:10ED8000A63B08AD676FA02319EB21E4CF57337979
+:10ED90003DB984B40572528371BE13D7C7B6BA08A1
+:10EDA000B145EFF7E8A4B6591B5EEE4598CCB950D3
+:10EDB000FD1AEC6729A7E57725B2BA19DB5D8DF35B
+:10EDC000D4CAFBDFA97724F714C0FB48B2858E2391
+:10EDD00074D1429EA555B4F55524417FB7EB9608F2
+:10EDE0003C6FEB53C3400FE26ECE5A5638BCFFADBA
+:10EDF00017D7CEC671053718DAFDFB3E3A5E0DC651
+:10EE0000F77CF2425ACF409FC525D379DDCB9FB71F
+:10EE1000069B935DF05D6F3ACEE7635BE9DFD3124B
+:10EE2000D3E3B1F95FCF096A50CE6EA447DFC0C902
+:10EE30005C3A6F6DFB141F8C6B347AFE3D6F47DCC0
+:10EE4000A7FB22952E5AAFBFDF27811CA5F71132F1
+:10EE5000CE0B72D176CC09F35B4F502EFC810AC7E2
+:10EE6000F56C1C3ED903EF4FC9C01F7E5704C73154
+:10EE7000D41FE8DF34E8A71BAF4FF2F69E8079C4B9
+:10EE8000F16D774CA5FD1D2856B09E03FAF672056C
+:10EE9000EBBB1291811F37307ECAF004B75981FE57
+:10EEA00077125FC803F5121CF73FF2F13FCDEB1369
+:10EEB000EDB4F5A5972BD0BFD5C40762522D6F696D
+:10EEC00087EFFDEB59FFA73CB04902FA5DB7A507F4
+:10EED000AF61DECF3DF03D2D90BDA95F02BA4DBEC2
+:10EEE0003F82D77DDB7ED90EFD4BDD491CA00BF6A2
+:10EEF0005659D2E0BBBD0B2739E0BD3340059FEA30
+:10EF000003BFCF756F271DCFBE2A05FBB9AF8FD2C8
+:10EF10009F9673865C3E906B67C8C3AF3E1F946F2D
+:10EF2000E5E338CADB7D998FC719D279B94D055011
+:10EF3000CE190AE135CCC7493C1B91EF360BBEB365
+:10EF4000066F8479CB18246E42E5F9E8A78B274237
+:10EF5000BBA27E73F9834FB5CC817E8F1F24EF59FE
+:10EF600067C035D200ED4D837138E1BEBB41423DF3
+:10EF7000154639F2F75908C98FEAA90CB2ECD55BEE
+:10EF8000F0AE1AE548E881D23ED522A5C6CA591589
+:10EF9000CAC13E2E07557D11E4132A67C72C944E33
+:10EFA000A10B54CE287FB5062C38DFCFF4ABA88751
+:10EFB000497E246B59CA70396ABBB86E36F45BC897
+:10EFC000D370FDF1FF867CEDA3E308C6D16BA23DB3
+:10EFD000216FE6F7A3CA9B2B84F2D646E52D04F4F5
+:10EFE0000C581C79207F4D1694137755733B9397DB
+:10EFF0000D286F1977B2FE4C58134639184DEEF6AE
+:10F00000795CE50AD4BF9AC9695BDFFBDB6C301F12
+:10F010006B08D71357DAE1DEFF00936BB39C99E5D9
+:10F0200030D5DF8DF2E9DDD94FE0EAD9518F7C4D43
+:10F030005B71A0FC2590C33690C3A2FF7FE4B012A1
+:10F04000D6712A7769DAAC4E171DF7A27EC2F0900E
+:10F05000B6B713D6F1EA6C1B5BC727BF7DDB3DF467
+:10F06000FEA43519E97F723C7D5804F732CA5DBBB6
+:10F070007757F666FA7E518684EF09598FF25D2341
+:10F08000F0123CA2F253DE239179E950EE833D95D4
+:10F09000F4FB577B890F5EBD9A2D637DC7FA0893F9
+:10F0A000632E9F357CBCC7F8FB81CB240CF2B900E2
+:10F0B00020097DFEE9F9FE2976FAEAF7962B8524E8
+:10F0C00087AEC79C6F05CEA8E6F2FF6A86AC83DEEA
+:10F0D00038B625254CBC585F04F8EDD5076C61990E
+:10F0E000B6379097FB5C8400FEEB9FBA99BEEF7435
+:10F0F0007D92122B9FBD7C1E3EE2F3DBC7F144CB19
+:10F10000F4C03289E2A257F37251BE06F23E994230
+:10F1100028A9EFC9FDC3877025A4590DA40CAF47DA
+:10F120007CDFE50E7E59A2F3D31BFEC009F37DE11F
+:10F13000F02733E04ADCE310778D86CF4A040EEBEC
+:10F140006DDE01388454513E9917E59309BDCDC752
+:10F15000806E257D0C8F91DA8D0C67BA185D28FEC4
+:10F16000CA82EF5EE2FD6A3D4F719A86E50CF5B406
+:10F170005A7BD60458FDF87D898BCDEB907EE174E7
+:10F180007F529208C3896CFE4AF8F77EA5F9BB80CE
+:10F19000B7FD2765DF36FA9DFF724F1589A3870EED
+:10F1A0004869C8AF65FD467E6DBD705006BAD0FE99
+:10F1B000CAD0DFD2DE6699E971C66725621DE97D96
+:10F1C000DEA0DF45FBADBDCF239E1FE855505F2578
+:10F1D000A26B071FC74B5C9FB4F179A20C85FD3F62
+:10F1E00046FBFFD008DF570233C6F45BC8DF82CB93
+:10F1F0004906BC5ED69F6EC2FFC6FECE57587BF353
+:10F20000815E2431BDB648E9BCFECF462FB35E1106
+:10F21000F5B6021D0B86F78B00538B7ECBFFFDE905
+:10F22000DA067F30FBE504C819E93924833C56CB64
+:10F230001AEA93D22A89E1723ECE7AF89636552B95
+:10F24000E4CA23A19DB7D82F856B006FF87E807626
+:10F25000E24091CD037A688267AFD213C36F8BF916
+:10F26000F7A2DF47B7EA38DEF6B96F6741B9A3D72F
+:10F270006FCB867958E4793B7933A5FF092E772D3A
+:10F280005B6BB15CE965F2C82C98973C2667F3F993
+:10F29000583AB9DEE9E0747B99AF9B6F6D0DE2F5EA
+:10F2A000CDADEBF17A6EEB26BCBE7AF9790DE6AF07
+:10F2B0002B3F17D7AF5AA5598967579598D6859789
+:10F2C0003C14EFD0F2757D6B77CFA2E33E75D98207
+:10F2D000FAF9547EEE8878A585CFAF28F78AFB0728
+:10F2E0009540B7FA5EDA5DEFF0F2A5BDC6764B89C0
+:10F2F000D40CF8AFD4F7BA42A87DB4A468BF168B7B
+:10F30000635A2F641642BDADD2AF56CCF124EE47FE
+:10F31000A9BF1BC7B924F28EE249495CEEB4D25DA5
+:10F320003F07ED54A68F4A7DEF55E9B4BD9A82FDA3
+:10F33000F5C817838A05F8A2BEE0109F5F17CEC7F5
+:10F3400012B19E15C9B561E84FDF00F6B3AB401EA0
+:10F350000FFD7BC822235F2EF1D810CF266C7F5083
+:10F360002111902F2582F3748AD6037C719ACA31B9
+:10F370007BDECDEE69BDF0BEDD6BD37C404FB7F0D8
+:10F3800047AC37F0477DDE9C53BE22584F64C4978C
+:10F390005D972B94347A7F1AD6574F943F4B397F21
+:10F3A0009E8679073E0ECBB8FE09BC2CEA3B7A3923
+:10F3B000E79122DADEE9B035EEF7812AA33CDEE2FE
+:10F3C0004E36DC57658F33DC9FEE9BFD6600DAA37B
+:10F3D000FD073C47421B0CFD3F0AFA0BDA7349B8A4
+:10F3E000FE9FB852D5770F940B1BFB65EE47D7E510
+:10F3F0009CC757D27A4F1D96914FABDCC67E555EA7
+:10F400007AF314E8A73AAA5F806E2FE98A0EE33EEA
+:10F410007D3825BC8DF2E54B05AF27036EA0FF6953
+:10F420004B683B9584CD6F4586B19E537DEF3F3C45
+:10F4300013F0AE5D463D57F1C78E9D00AFCE16DD91
+:10F44000D709746E2512D2A9ECC20119EA5B1536F0
+:10F450007EBF728D913E1B578E33E97FA37FA9D269
+:10F46000C3FC44F37D17B1BE12F0FFD0FB0ACDE818
+:10F47000179A0FCA20A6DE32935FA8C4C3FC4225A8
+:10F48000E01712E5BC6498DEA7F7D8BEDFB4AE9BE8
+:10F49000E53BA1FC5BC87AF0A790FEE5A3E096ED02
+:10F4A000DCBF62D4B744D927C5E28A166B7332E257
+:10F4B00086594C7F91FEF4B8FE2AB31E21E43EE447
+:10F4C0002B4147E20A918C79307E5EC6ACFF385DF5
+:10F4D0009AE8745CC57520C4F18B27AEBC9BBFCF86
+:10F4E000E6F2BEB097EA4D58AF7DB20BF4C6A9CB99
+:10F4F0004403793C4BF99DB5DC7335966FEB7A9BF1
+:10F50000912F69795C064F5DF6A1FC062632F96DF4
+:10F51000F7D628694C7FC69577B31CF492D0134573
+:10F52000745E4FE5E53EBE927ED77558E8018B8E3E
+:10F53000727598E1DED37D9B915F0728BF02D98762
+:10F54000CBFD392D76DDFFAF9277B39C0FC9FF302D
+:10F5500079677AEBD4A005C7537949C17AEAAE102E
+:10F560005CC7CDF27F9ADB6F2FE96F6A3E580F0BB5
+:10F570003E40FB987C66796776486B2FC1F6CB2EB0
+:10F58000BC2FD3917F61F22EE45CC8ED35CBFB7FBD
+:10F59000919C9B9F7FD3C2717F02398DCA7F08CB1C
+:10F5A000ED4821F9E0676B91927CDBBD20EFCCEF59
+:10F5B000632E3F4E16FE587BE837745C0D9459520B
+:10F5C00029A937929E29C00F13267AF0FDDD969E59
+:10F5D0004CB8FF3DE9CF9C4EAF250A3902EBAFA4F2
+:10F5E00013F200ED92E4719135B309794C0EDA65AE
+:10F5F0005A5EEA8DFC51A27426F7130FE0C16952DE
+:10F6000030199EDB289D345A9E28E710271212419C
+:10F610007A2DE542B7D4AE45D00F5F6CEDEB117497
+:10F62000C7F5638DEBC3E9B45E1291AE4E8F8EF3D6
+:10F63000A0359CE5D3609CE1EFDF0D7EABEFA9BE6A
+:10F6400067E3D0DDF219C709EA07E96961F40C59EB
+:10F65000927CCFC6C15B8BAEBDFEB792E8B514E815
+:10F660003873381DA53E4A3FA083F2E7AB6027966A
+:10F67000BA197FC9BF5775F0D310D91EBE3E4E3F91
+:10F6800036F27E3C26EB37516443E4CA66A44F2B26
+:10F69000CCBF06F4CB20DF8CE1AF85B28AE393EBDD
+:10F6A000C8265C5F48C4027A64B4F9B02A44916108
+:10F6B0001EBBAFA2DE6DE4FDB3D1E7DAECC4F325E7
+:10F6C000D7F9FA23749EC8EFD93CB52E32F2E5166D
+:10F6D000DEFFFB78BF403DA17D04F5537AC9BF53DF
+:10F6E00037C55B27760BFA737A99CBB7DECAC62F7C
+:10F6F000CAEF92993C85AE7DDE564DC84D3C6F8277
+:10F70000DFA5BE1389E66F53388E7CCF932D7CBC6A
+:10F7100021692CF2B090F3A55C49E70DC6576DA4A2
+:10F72000E30E3EAE35BCDEDB25FD7F023F4C93028F
+:10F730007F075752D58DF2073C0EE5A613FD5BFC03
+:10F74000FD569053526B7C4F9F6FC7EF5677637C8B
+:10F750004A3C3F26E93B65F6BE11BFD38DEF291F1A
+:10F7600036C173CA2F449E0DCF3DD81FCA27C44E41
+:10F77000EF1BF7DFF165A02BFDFE51AC9F9C337CA6
+:10F780006F050591CEAED26C767D0AF88EDBA73B75
+:10F7900056EB4857956CE2F6335BCFE6F3F5CCFEBB
+:10F7A00047B60E0EB854F46B290E3D1CA1D7745702
+:10F7B0004407BFF338D21D027B6CD54AD9A0E75766
+:10F7C0009BD6972FDF695C7FD76CC832DC7FF5FE54
+:10F7D0005CC37D70CB74437D6B77CE31DCDFB9BB0E
+:10F7E000D470BF6E5FA5E1FBF54FD719DE7FFD99A1
+:10F7F0001586FB0DCFDD1637BE29D6BB072DEF6D65
+:10F8000008D071ED805731785189C62F2D0C8F1992
+:10F81000BFA3ECE751E6413982AE08339F2AA6F830
+:10F8200067CF90FC6C36ACB71D216F064005DDAB91
+:10F830006888FF437A775E66140F547AD6D5C75B23
+:10F840007F457F145EAE9CF454C2BCE98AB19CC271
+:10F85000E3B59AAF1FFD30E678ADE25988EBBBB94E
+:10F86000BFEFCA2919A09768DD1E8CD36A635B4F6E
+:10F87000471D1FD584631A1F6FAF1CC6999B785C08
+:10F88000F38BFA65E8DE58C715EDA711F78838F94C
+:10F8900012569494789F417B6C09F40FD6E7228628
+:10F8A00077ECF41F5B6719FDEB78F9C0FD2E2BE0B8
+:10F8B000E34095B19F751C47513954404F94E49BE8
+:10F8C000DE433F674039235EEAE4FCA8293C5E3E04
+:10F8D0008FCCC379E072BB4CC86D35F3731057FC05
+:10F8E00038FAE2CBB4D01C6CDF907FF05A7E6E12F7
+:10F8F0007CB7A489786C149F3C38779BAB0270BEB0
+:10F900006EF5D5D2D2953EEE6FD265C4B3D7E5B3CE
+:10F91000FBFA2AE67F5A1CEC463F60FD9DE16D70C4
+:10F920009DB43EA2603F4C747DCA134E436CC0E947
+:10F930009BC5E99525E8CAE928F4F8A40DC679AC79
+:10F940002F32D26B29A7A799CE4B391D979AE87809
+:10F9500014FEA074999B808E4B381EB5CFE5F6DD62
+:10F96000607A5CBBF129EE1F13FCA398D635A13F4A
+:10F9700086D637CEBF8F811E079CE7E23885AF7BE6
+:10F9800089E4A83CAF614F39F8C933AC86F8C54269
+:10F990003ED6923C16EF28C99011F797B8DF88EB56
+:10F9A00067067A57CF8BF2E7D15E667F34BACFC94C
+:10F9B000304F75790CE7EFE4F411FEBF56EE1735C2
+:10F9C000F7EBC4945036E0A3939742D99B8BC0FFCA
+:10F9D00023219FB4CDBA379BE50BB07EFA797BAF7C
+:10F9E0005C0CA1FD76B277E4F8A2C0F966BE29F1FD
+:10F9F0008531CE5802FE62DA5E6D3F5D83E8D01736
+:10FA000046FE59F61402AE8E28D09F7AF75A05FDAD
+:10FA100065EE0605FCCBB5EEFD95400F3F09EF7096
+:10FA2000825FCD23F92240C70226BFEBE9BF58F918
+:10FA300015FDADE90B2A20EF351EA35DE3E7FC566B
+:10FA4000ED363DCFAB417EF39BF86DBBE0B3EBC928
+:10FA5000F5B17CE6E7F3A25ECCE1F21A9FCF44FC5D
+:10FA6000E2DFB99FF5573C4EF72E8FEBBDB3D58340
+:10FA7000D757B6E6E3F3E35B7D78FFF6D662BCFFCB
+:10FA800039F879E9FD1BDC8FFBFAD600DE9FDDBA81
+:10FA90001AEFBBB89F56F0F12E1E4FA996DBD0BFD0
+:10FAA00058E70BDA5D31FC54C7FB8DAC0F38A4204E
+:10FAB000BEFFD536E58802FC756E484E08EA8BE538
+:10FAC000F5DE030F51BAD8BE4D82802B6D1DFFAA03
+:10FAD0004CA5FC5F57EBB5AE83F642CDCA1CE0C720
+:10FAE000C8BF2AB9F0BC7E96F58E38ED8B7612B57C
+:10FAF0006FD66F2B6A8D76B05FF8D1FB832118E744
+:10FB000084FE6004FAE777AB9E787EE1F689EBDC51
+:10FB1000C04F8D17836EE0A7C689276466AF337F19
+:10FB2000B8CAF95494F7BB8DF17C95F7BB8D3E872D
+:10FB3000FEB6F58F4D0E44B952A559766989C7674F
+:10FB4000F637ED94E2DBAD4956866B9D3CBE4A75B7
+:10FB5000A60272062C0AFD9F40D906E44BD398DF1B
+:10FB600022D917E47AD9B88EA7150702A097B40C4A
+:10FB7000E2AB01F5A6F5B8816FE4E285E7619D256A
+:10FB800005317A1BEC1EB3FD1F7B2FE3D2154A49CA
+:10FB900087ABB91CA3AFC659A86916EBDFA3DCCFAE
+:10FBA00021E8AB71FA96784EFE02F4EAA33EE68FA6
+:10FBB000793483C565078AD7222E2BE176818DECB7
+:10FBC000C1F249A419AF3B38BD078ACF11907B59C8
+:10FBD000A1B83903FA630F87E8F74E937E573423B1
+:10FBE000BD254A933580AF7B1583BD2115333D6F0D
+:10FBF000077B1DEC188E5FA2765E905C05E28F118C
+:10FC00004FEDB41AED3171ED552CC80F2EAB299F75
+:10FC1000EEFF7AFA9DF842E927ECC4219C77EC6B61
+:10FC200004E231229F50947FC5E46F52B3591CC641
+:10FC30005CEF2D5646F705568E8F059EF09BDB71C7
+:10FC400084809E2AB5A71CD2F07A12B5477A678FB6
+:10FC5000E2B7DE86ED9F555CCC9EE0F940D42C9750
+:10FC60000CF6895D77837D38EC7BB7C520A7C3FB95
+:10FC7000CDE8F345F777093548E1BA54E8E1628603
+:10FC8000279779289EA47F2ED3189F9E2997C2DBA1
+:10FC9000914F7583BD555B5C731EF512B547D479E2
+:10FCA0001CA7D3FE3741BDB49ED7278AEF86F489BF
+:10FCB000E5EACCE1F504AA18EE21A17F5914EB3F47
+:10FCC000085076C99F0DF5B2EF69D1F6ABF1FAC1D4
+:10FCD000F556A0F8DEA59A13EE75E949C07B05310B
+:10FCE000F800E89A6733D2D9A4FFAA86E93DA3BEFB
+:10FCF0005D48F9F7086DA756DE540F2EEF9ABD6BDD
+:10FD00000FBF8ADD117688276EBDA7E08F9B01FDAE
+:10FD100019F10AF1B13C8ECA90A71EE99E2191B05B
+:10FD200017FA6FECC7C26C931D96611EC71E9CC765
+:10FD30000E85AE2374BE3AE83CEE41FB38BE3D254D
+:10FD4000ECBC05DE41B4A784BD47B8BDE7A2FF62A5
+:10FD5000F158192F5F7EBF4701FC5B6E37F9998719
+:10FD6000F28F09DA530B88B1BF65DCEE2B33D97DF6
+:10FD700042DE5F14FA52D8B55C1FDE22ECA9B291C4
+:10FD8000E3CB9DA67CBA2ADAF1E66B900302BD8232
+:10FD9000781319A29381BFDABD539B2394AEB7F8B1
+:10FDA0001C2CDE42FBA9087D8E7462387B292F7FD4
+:10FDB0008B4745FEF76B2C7E513F8ADFC25FCCE25A
+:10FDC0000667ED125B0F42E44D12931F5EE961FA84
+:10FDD0005A33F145B627500571204D917C61329C14
+:10FDE0005FABB83D07DF6FA1A4A8CAA336F9EC78D2
+:10FDF000F9E5DDE05A2565B40F4F7913CFAFEEEB8F
+:10FE0000AF84E919EBFC1213CE3EDBFF3EE6750D25
+:10FE1000144818F769F77E8AF68188EF44E977027B
+:10FE2000F351FCC59FA0BD3294B7C5EB5B2AEA2B0A
+:10FE30003E86F19AEFB88E25433CE60CC471E9F793
+:10FE400067947E0DEC9045025F518A46043DBDD11A
+:10FE50007C9308B7ABCEDADF4806BDF912C7F54789
+:10FE6000FD726D3C3FE70299F999C5F54695AD3BAA
+:10FE7000F35486E7C4BD98DF217E924F15313BFCD9
+:10FE80006F0DF36EAE1FCAAF46FF60A460247BB453
+:10FE9000DE44E7292A5FF738DE180DD78A719AE920
+:10FEA000601EA7F93BA7CAFC65775AF5E9EADC684A
+:10FEB0003B62BD33975F96202FA7BCD8E89F5C704C
+:10FEC000D9989773A73558A2527A562AD2CE540F92
+:10FED000EA3594A78E2B1AE29881FE8E9D30ADC72D
+:10FEE00007997FB48CC8611B5B17EA216E27E44633
+:10FEF000F0BFB91FA3B55F36D883F678F9E5FE2ABF
+:10FF0000E0BF5BFCEDA8579750BD3A2E8E5E5D2892
+:10FF1000F7ED1C07F2EB63FB3BCEFEB2BB0AEF35FD
+:10FF200009F361F5B25C651CF0812BBEBF6A3EE748
+:10FF300093E1F13CA1575D0AE006B3BF6D3E97BB6C
+:10FF4000F9267E08AA4338E8A6ABB9A3CF53227E90
+:10FF500018E81FB82F9E1F555C13E55DDD4D4CF46E
+:10FF60006D33FA9FCDF5087F1091DBB2419E85FD80
+:10FF70006B2ED7A4B2B8C7F1C2BB486C5E95D00750
+:10FF80006A71B3067EF1AEE291D70B733E5C39F431
+:10FF90003786AE9576633CF609457F10F8318A9333
+:10FFA0001A98BD5ADC80F6EAD202BE2FA8F02EB411
+:10FFB0004F855DDD78F321CCE712F95AC23E35F763
+:10FFC000BB6BE2F398CF335ABF851D7FCA26B33887
+:10FFD00004B5DB3D68B753DC17E7BB576C8C5E3F5D
+:10FFE00055F4FD20AF3BADBABB01E28C8536DFB3E3
+:10FFF00071E6A1D7C6E4BB2B41BCF55710F8988B2E
+:020000021000EC
+:10000000E3403A98D71B61C78A7D4A13DC4C6EEBFC
+:10001000B81D5B5AD080F298E6A6762BD0CDC7ECFF
+:1000200056D267B453976ADD5930FFE6F54E1EE4A9
+:1000300076ED18EDD65D0EC6474117B1BBE97B875B
+:1000400042A1295DFF1E972B8E013D76A511B407B5
+:10005000CEA4A9E10371FC0D6F737EAB963718F83F
+:10006000AD8CE312B5AA47037FC09941E6C74B3474
+:100070006F0F99707A4E3E29B739E1DA5F0EF4A01E
+:10008000F7BA0DAFFD989FFD70E1BA9C78F51D6839
+:1000900052E2AE4BBFE3F3B65CE46BD7327FE4DDF4
+:1000A000052AFA8527D4BE7702F9B49EF3E9121B1C
+:1000B0008EBBAB50C179E9BAD9DB0C71CDAE423BF6
+:1000C000E6A3B417FEEC9790AF5D562C19F24B04E3
+:1000D000FF9601AE86FAEDCCDF79B79BE9E12E8D74
+:1000E000E3179E37B291CFE999C31F3863F34656A1
+:1000F00008BEAFE77E72137EA26A246E1C47E4211D
+:100100007F5CCFFCC2778BF11E39B413E4AE8EF363
+:100110004DFBA5756E94CF232C3FAFB1B001FD45CB
+:10012000ED13DF52E17EA3FB4315EECDB842CCEBDD
+:10013000DDC53F65F9917C5E37823F9EF2FB4B99AE
+:10014000D3AD1E7ABF3C72B315FC9DC23F3B2C0E53
+:10015000C5E329356CF8A4C6CDF0F589CC6492943A
+:1001600001F492C312D02DE22049907FE6B6861D9D
+:10017000F4BE4EE99902B825D984173F7EE1503686
+:10018000C8F7F119BF55A0DDEB8ADF6B84714C2AEB
+:100190003E84FEFEAC23873AD3693D4BF3894FF78B
+:1001A0000CEF4F355F9FEECE60F94277FBC221D84E
+:1001B0007776E10ADB4F51F1C21B95B0AC0D8FCBC6
+:1001C000E804708888EB286E1E17E1F10972E5AA31
+:1001D000143B6F754AD00EFAB7B1F80D27F4773992
+:1001E000A75BCE61B901F8BBEA85395F013E2137D3
+:1001F000DB5CD7D3062FB87EEE9CAAB1F777B17A35
+:10020000E70769F9BA8243D9EB0A87EB9721F92905
+:10021000F8C3D620EDCF99453FCB06DCF606D5BB1B
+:100220001E6897EB2DB3BD645E57CD7931E67167DB
+:100230002ACB6A6D7361BEBFEFF6C6F019D5036BAA
+:10024000A1FF1B9FB4631E57DA91D75519F41BC544
+:10025000EF3552948F36723EAAD398FE6B2C24E170
+:10026000ED12F0DF87F5A52077AFB27CC30947DE3A
+:1002700063F9A3A6F5A18BAF1BC2EFDC35F17D942A
+:100280009F8F0F73790959A4587F9256DCBF12E6ED
+:10029000C52C27E27E7E7F4FDCF5E15D1BF79B0CD2
+:1002A000B2F71AD5DF10D736BFF7737BAA0CAE3181
+:1002B000F5DC6763B8575CAF210FE1896F53F96FC5
+:1002C000DFDDE1BE03F59486B87DE39143F910B319
+:1002D000C93C7CA88AEB0BB4CB643ECE09C4837ABC
+:1002E0006AA96667F103139F5B8BF747003E8B7526
+:1002F0001A0C722533AA47E4583F441C3B8C84F403
+:1003000037F362F2BEE8FA4E40AF54BA99FFD5CC4B
+:100310002769C554EFE024502E8C89FB9AF9B64E1C
+:100320000BBA219E4DE5E73C8B7FD2F50AFC137298
+:10033000BD0FE793F3A785FE83F52FD967E44F6BD5
+:10034000BE6AC02BE67EFCA3CD88FFC5FA9CE6EE14
+:10035000C1FE2DD59AB3A1FD09EE1EB4B7A87ECF7C
+:1003600086ABE033A1AF87F8AFF0A6C5A0DF81AFC1
+:1003700021447EA6784E12E8C13A37C329C4E44F1F
+:10038000EF728F6C6F749AD6BF332E665FD515935C
+:1003900024572AC83BF33B753D92BE3F39C62FF721
+:1003A0004FD6608B2DC6BFEE2CF8D2629713F40C9B
+:1003B000CBDF2AA1EACB9A1BF5670ABFA988F70908
+:1003C0003FE9307F66413BE6775945DE058FFF0DFB
+:1003D000CBFB4910771457E1CFB46D6F567C3C5E70
+:1003E0008278AC9EFBE106678FE20F65FE078ACF3D
+:1003F0007E6E1B3F3A3E3BC8EDCC5E501EF4BADE2B
+:10040000E6C2AB06F928B4AB5D8EF8B8ED656EB701
+:100410005D8B7C9E94E13BD6CE4726FE12CFA3781F
+:1004200098C9C184E2439DB178B8AC89D286CE9395
+:10043000DA44A690D4C47CB77448EFFDD4C05F43BF
+:10044000F878145C2CF8EB92ACFF19E898A85C1DC6
+:10045000EF47A2F78D85B6D5906F45CB9109A9ECF2
+:100460003A8D5E3B671CCAB6D0E7AF01FE8AE9470A
+:10047000D7F78EE0387EA5B27D365D97D6E5003E93
+:1004800038ABE8A9F6F163E71FB33CD9E7EA9E6D04
+:1004900054FE8E66DB717D3EEA6638E4752819C32A
+:1004A0004F9BD5E075F6B9A8EA7592CE959CE0739E
+:1004B000509A5563DB27767B72CFFD81185CB91BA0
+:1004C0005E4D84381FE39B07D51ECCC7B99DD66E01
+:1004D000A3ED1CD3E4CCB5F47EB69DF1E3B1903529
+:1004E0006EFEF36C3BC3CF9BD5C06CE82769DE84FE
+:1004F00072D620C901907FE21B9B7F6E474BFCBCEC
+:10050000D2CA68FDF3B1FEC3B47EC00D3EEE7F27B4
+:10051000AECCB8FE763EEE0821B5202F8FA619EDA1
+:100520004DBF9DAD7BF3A3F52F8EAD1FF3B3E6E278
+:10053000F32538CFCFB1E7F9762617E5B92CAF4DC3
+:10054000D051D4BB325ADF4AACEF08FB2ECFCEE3FA
+:1005500006BCDF02E79BF39F163AD87C44E3A6046F
+:10056000F56689C6FCF513FAC3C7E0BE9CF07D9919
+:10057000D2DBB87FEFA8D58BF900ED8E694F6FCA3B
+:10058000803C0923AEB7719E51EC3F946371BACEA3
+:10059000714C49760EE2E10E923BA29D237087904A
+:1005A000EB05C27F7AE500EE176BE1DF8B76CB4D72
+:1005B000B82EBA5FB11BF72B4EE8EDC6FD89152E9C
+:1005C0007E5E44DA37D1BEDEE5B897E1F9C99FE235
+:1005D0007EE505D907E5787E4245F45F7903DB3F88
+:1005E000EA62EBD402815F4D76C64B995D32E0C87A
+:1005F00044B8FE84147C26C2FC9A067CEF8F7C6D86
+:10060000C3214A57BD97B81CF4BE24C2E24C151C46
+:10061000D75728E12C581F6AB2993FAAE54FDD59F8
+:10062000B03E1CFF3413D78BEB94FD38DE498A179C
+:10063000F1FC4213FEAFB01FDA0679138B14898CDC
+:1006400023C3FB05FBD5C08E2871B3BCA0126AC5BD
+:10065000819DF1326D1FFC65157FA2F3678987EFDD
+:100660008D38A5562927AC1CC7FBD9CCBF341A9EA0
+:10067000AE30D903625E2B943D556097B4809D41A6
+:100680001FB5283B9474DAAF5D8304229BC4CFBFAF
+:10069000CBC9B630FB60B2650DD08D58997DB0CB1B
+:1006A000F5D776B40FE87BB00F2AB87D5061F7A27A
+:1006B0007D301A8ECFB1333BA1FDE254B49F228E20
+:1006C0001F66817E16F9E402DF0BFECB54CA4F8011
+:1006D0003C2FE07C28F0BE4DE0FD2B9B089C275072
+:1006E000A118F1BE8DF35905C7FB2D10F7027E3D11
+:1006F0009F79CA0BF11881F7AFB898BF9BE37DB122
+:10070000CFB203E43306EF779C1FC0BC8597B39943
+:10071000DE17787FC89EFC8C78BF4CE80F8EE76BA5
+:10072000386E10EFFBB9DE33E37CF3FB6BC5F98465
+:10073000E3F8283E36F26FFBEE1C8CAF94B8EC6801
+:10074000072CE80D0EDE4BAF995736FD662FCA51C8
+:10075000B20F3EB3713B6CD43C5013EEA776C34E40
+:10076000D87F539EC7F28ED2B25D55B09FBDC223D3
+:10077000A1FF69985C98ED806C17DA69954A83C887
+:100780008F1B11EF57682EC4DB8A523326BC6F963D
+:10079000AFDA3CDB887C9DED30E617940BBDA9DC1D
+:1007A0001B42BDA9DC1B01392AB7737F8FE36FDCC5
+:1007B000B1E73AECE2EB81D0D3425E3B1CD39460CC
+:1007C0000CFE1AE26B25578BDD5FDCC1F9F2078A5C
+:1007D00007FDAD1D76661F98F1D850798EF72B383E
+:1007E000DEAFB033BCDF311CEF173B62F09BD3CEE2
+:1007F000F0FE58F30A841D5B63B263DFB71BEDD8CC
+:10080000447CFD215FD7A3F4F4325CAB7811D70AA6
+:100810007A2A1CD7DA004FCEC4751571AD90E3610A
+:1008200074B5E61A706D39C7791DCA9871EDADB10E
+:1008300074315F2B46C1B5BB1C14D76A580E716D5D
+:1008400085C0B5495E03AE251AC3631DDFCBC771F2
+:1008500074A4313C6BC66389F107D76F265C21BE57
+:100860006F4921D9E89F1BC225D3E2E2924438C4E4
+:100870003CAE16C025DA5F029778709C663E3F9AC0
+:10088000A2A39D1FC529BFFDC6212A87BB2E123CEE
+:100890005141E0157FE48FC71A8A102F1087273A3D
+:1008A0004E8157043E11EB638BC2F249057E49E449
+:1008B0001F15D76BC52F2732FF17E21E336E117835
+:1008C000C55C7F8795E199963FBDF59F8A6316EEDB
+:1008D000A7DC47E5A45CD9867AC9AC075BC05B4D51
+:1008E000CBBFEC22E110D4FFA773727A1C7D6CC6DB
+:1008F00033669C32567CB328EF22E61B8E863B3A49
+:100900009430EE936F51EEB3833E32E31A333D736E
+:10091000B24903C40304DE49C4C750EE2E6714076E
+:10092000252A47F538E2A384F5D82F5E2B2E3AEF1F
+:10093000181117313D50E1667A20115ED9E57369CF
+:10094000B179AC627D69CFCEF925EE37EF55F1DC98
+:1009500084F6F353519F26C24B6D26B9EB003DA29E
+:1009600045D7AF8474E91D407917B86A347D21EE0C
+:1009700013E129B1AE9401E81F9F386E392589D95A
+:100980007D0FE6303BDAFC3E9A8762C45524A31003
+:10099000F9F81EBE1F3311CEA22B9893F9AF42D89F
+:1009A000CE2A6E87A2CF701ECF43A05D0DE4913C8E
+:1009B00058270276263767E64A2837CBE0399DD795
+:1009C000F22A16373A5728613CFD4CB90DE7F5D4A9
+:1009D000C72C4FB13D85F95FCFCC72F80ED02E7C7D
+:1009E0000CF5D275F99CA3BB0870C0AC24EE2F485F
+:1009F00067E35C921CD98071F339D32D21EF7079B4
+:100A00007F3089F7235DC3F85B1DC7A3103FCC9AE5
+:100A10003D7C9FC1D3495EAC1FF2E7B368B99D9698
+:100A2000EE8773E8238785C55BCD74FD98D31D08D9
+:100A3000638BA1437D9E5D7750FE77DCC8E256470D
+:100A4000AB6C98A7E380103BADF7A1FC9C9478FCBD
+:100A500021C6657EBE9F8FFBDCE47E5CDFCEF2BCF0
+:100A6000DF8D8A14027AA3A22E82631527ED7F8878
+:100A700016FD4A521AF6EBEC0BAF23DF9E4EE374E1
+:100A8000D025B4D7CE78983C855C5A18F66BD2EF57
+:100A9000ADAB46C807E92EAFC9677134422488AFB1
+:100AA000C11F39C3E9BDA256C671AF70EDBE17E4D0
+:100AB000F15CED1BC9702EE5D2410B01B95BE12A57
+:100AC000B90B9EB7A7303E063A038E5A51F5A56F73
+:100AD000C0F3FA7AE37C9C4CCAC171942A6C3E60E4
+:100AE000FEB2660F6F97AE7E41353386FEFE9FFDE8
+:100AF0008D14B3AE887C167B82FCBE44E39662F50F
+:100B0000AE1CF5474E28DEBF07F6CD048AD879180B
+:100B1000751E1282F86F9D8F44BC9CBF30CFA633E8
+:100B20008FED17E2F29556BCBF2907FC97830A8B1D
+:100B30004B9BD691523A57D9E9E04F67F37366AEB3
+:100B40008C765E6931C3F9A51CE7D7E90D18EFABC8
+:100B50007FA473770EBC97B3ABCB3D3C6E1A433F7B
+:100B60007284F9E79699F83CC5E4FF2FF599F206EF
+:100B700079BEDFD1FC675CC03F0FA673FE992DA143
+:100B80001CBD2E791E01B910745A9224E233C4633D
+:100B90008DE18F217EE0F36BA67B227A9AE964E6F1
+:100BA0000B33BDCFA498E89580FE89E85D5A5CFEC2
+:100BB00017A5EF05ABCD0A7CDB6EFD6D36B78F88D0
+:100BC0001CA34FCC74BBA07952404F9C1B3C87B8F0
+:100BD000EDF464CF57F07C2C2AC778BE279787E8BE
+:100BE0003C507970C6CAF3DB53409E299F59A19EA1
+:100BF0007A5DD21D207F8777DD8BE306397546E568
+:100C0000C84CFF61F247FF57447F7387CB91399FF0
+:100C1000ECB3CADFB7409F53BA2D4CF2E055E8D38E
+:100C20007AE2FA4AECFE5611676FF73606605F7A91
+:100C30005DAF05CF016A197C5E590BFB5D6B255CCE
+:100C4000D634D28DFDD59A58BEC4D4A71E2090CFDD
+:100C5000FEC864E2037DA535B1FC09FA1EF3270442
+:100C60007E17E73AD2F73ACB17319EBF94E233E6CC
+:100C7000FF2CEFAB403BA2939F8724EC0491F74AF3
+:100C80004CFB5E1AE1C9C4E8FE90A64B616647249E
+:100C9000D80723AE667BC17C3DDEF1CFDF003F622B
+:100CA000599E8A7EC4B2C1881DEA7BB8A0A316F300
+:100CB000DC6A2517C4E38E7FDABC03CE415A5EF0AE
+:100CC0007E5C5CD27AE1091F8CA3D5BAC7970EFA75
+:100CD000613B5BB71CD30A26AF1D01F7046BCB6BDE
+:100CE000BD3312E799DC93CCD7F7F6AF1D7810E24D
+:100CF000DE7DAA0FEC97C53CCE5FA7EC59BD96CE22
+:100D000067E722C9B78D3EEFBC61EFA60E88639CF2
+:100D100057D1DFD775E96036D819AF7DCF8EF6E8A9
+:100D2000F14F0F3E8D79267DEA3C18EF50FFAFD78B
+:100D3000D8FB8F5F3C097A6679FEF22268C7A190E2
+:100D40003DC04FD70D36BF0BE725D4F5AA7341FF41
+:100D50002CAFDD6FFF2BA053ED4FEDD783FD31E8B6
+:100D6000A986F9BC2E2958994CF55E5681F73B1996
+:100D7000D08E8FF874A46B3701BA8AFC04610F948B
+:100D800071BE6959E44D2131743D3798930274CE98
+:100D9000A9E5790C8BE400D8CBE75CD7A7A07FB29C
+:100DA00096E52F98E9B51C707A2AF4CF3B795D9CC3
+:100DB000F53BA7F60F5B83E00FBE81D9E7E6F77737
+:100DC000707A3B7EB7EE008CD7F17DBB0BE0B5238C
+:100DD000417EE6D464AEE7DD63F397083C43E96AFD
+:100DE000B7C6F80129DE5F9F1C1377BDD6F6BF9A00
+:100DF000CCF4C02539B819E85FCAFD2565DC5F92DF
+:100E0000A85F25A3F831281F219D96831F6326BB69
+:100E10004EA3D7CEC5DEC9063F06D1DDA067CF41C0
+:100E20007C0EF098B26C3BF4A3EB02F36724E2DF94
+:100E3000E579076FEB88D1775D563D1BECDCCE1B67
+:100E4000DECE82F9FFCFE2DF213EABFD69139CAB22
+:100E5000F550C1F2F1A0FF62F8F869988F6BE56375
+:100E600033FD5A16E5A6102DCACF828F87F3A584CD
+:100E7000F6A8E0EF44F301E5C01E157C9EA8DCB99E
+:100E800045D3E2F27FB49E8B23CAC16ACE57770066
+:100E90005F8D07BDACBB400F2FCC7A17EDD657B88E
+:100EA0003E1EE29394EEDBEEA17A27F4AC1DE3E85C
+:100EB000472FA978FEFAD167D6FF00D68DCEC10A9A
+:100EC000D787B88E97BB56D07EDD00F64301CE4F54
+:100ED000A712E337BC902CE2E6C67CDF9FB87E9376
+:100EE0005ECED659AD9CD27B265F276EF43E93042E
+:100EF000EBF94CBE9F62469B1A775DE61082146444
+:100F0000BC6E01E85F70D8584E1BDA9FDE6C81F82A
+:100F1000E08DCF99DEF37DD5E6FCC87F4F36ED7FBF
+:100F200032ADB7F64B23E769FC0BB77B9FE3F9BF04
+:100F30003FE1E70936F3F3049F877DAEF47A18F6B4
+:100F4000B9D2E72FC23E577A7F84EF7325D9633B2E
+:100F5000375E9CF7A4723A344D0C1BF6698AFDDFAC
+:100F60002D709E12E001B7CACEA17351B405792A43
+:100F70001C2F5A92FD7615F6737D44304FE5AFCFA6
+:100F800077233FECE6EBAC19C788F31ECDFD52A3E7
+:100F90007454C04F7574727075A0804F18F0CDDC1A
+:100FA00009FB1F8AC1D3A91AB32B1BB9DD16BA449A
+:100FB000C2CF4AD1F2A72F91830F313F5B4806DCA5
+:100FC000017F51165EDC4B10C72D2EDA85F617E037
+:100FD00040C06578FE580EF8BD5E443CB77870DEC0
+:100FE0005D0CB7E8C370DC10DD64A413C3E745AF44
+:100FF000A35F71716F7C7E8BE637ADEECC8BD9979A
+:10100000503F18ACE7F8C8157B6E826AE22B733D3F
+:101010006945CC7FBF249FFB7B783C44CCE78E4D59
+:10102000DDE82FEF2AB279C0BF60C689669CAF1693
+:10103000B17D64CACD6C3FEBE24B2C5E880C9319FA
+:101040003D9F4DE579BE2DAEA00FFC98753E13EE89
+:10105000E5E74B95E51BF1BC19EFABBDAA09EF879E
+:10106000D87AB89DCDE7998F09DA51CFEE63FE812A
+:1010700056B787F11F09A3DDB3C06D99F59007E25C
+:10108000566C7F66C920417F4949AF07FD4F0BFA77
+:101090004864EA0C3C87B809CF1932D16F01B87A9D
+:1010A000D3A11E4FE7784AFF050AD909E7CB64DAD6
+:1010B0001B749003D5BD09F7E3407EC338C647F6DD
+:1010C00058FAAA49A77680082CE07E35F1BB1513A3
+:1010D000EC87900F62E66FC4F898CAF94EC4BBCA99
+:1010E00079FDE57D2CDFCDCC0769F68BEFC239CFDA
+:1010F00015831A9E036D9EF7E171B0FE0F1E8338B3
+:10110000CFA524DF7698673B9B67318FAADC26C387
+:10111000FE0EA2B0F912F130B37FB5D4B46FCEDCBD
+:101120002F715EC256CDB48F8CE3F80ADEBB26C7A2
+:1011300021C3B9B5155CCF0CADDBF65C1ED762E7F9
+:101140009CB6F6CD1E31AED5EA62E7FE11D7F2515C
+:10115000F4DE76B68EF0F3054A8B4912E09CD23E5F
+:10116000C2F8EB114B38D91B5B3E6CD857EEEC5BE9
+:10117000B518CF6974B9AAC0CF564A58FC52EF25AA
+:1011800018CFD4C9213918332E112F51B95F4C957E
+:10119000D8B8049DCCFDBB7DD0680F7D2564DC0FE5
+:1011A00071DB03C6FD1BB76ECA32BCAF599F6B78AB
+:1011B0005FED996EB8FF92DB787ED0FF081ACF0FF3
+:1011C0005AB1BAD2507E59C0787ED02DB5C6F383BD
+:1011D000EAF4DB4CF2AB1BF8FBA8D4FD5D18BF258D
+:1011E000F997B923F979CB468B2387D879426807D9
+:1011F000C689B398F7BB7DA409BC609483CE5039EF
+:101200003B6FA7D7B3AFDC03F12A9F82062E3F576F
+:10121000A89AB072D56E166FA9CA886FCF0B3D68B9
+:101220008E4F8873014BFBBA910FCA4CE70096B8FA
+:1012300017C63DE7F33F34D3B91809CEBF18B67EC1
+:101240008F757C3CCE34EAF878BB25A4FB98D39B01
+:10125000787C631DD7507E179C4748E9D10D8F26B7
+:10126000B2F71A95B79D69F978FE4586BD424919CE
+:101270001FF577127DCE98F2D1DAB91F9FE82BC601
+:10128000749E6986DDC3F84267F868A7A487E1FC0D
+:101290003C731C55CD177154E339188E9D442FA013
+:1012A000240A55108CEB8772ECE11D12E493B37D98
+:1012B000A68D375870FD69BCA8EF81FC94A61B145D
+:1012C000DCE7582D6B585ECD66EB931F72EF217FE4
+:1012D000E2357DB5E1FC0EF77617C889FA347B9FBD
+:1012E000683C6D13D5D5F1EC859B52181E3AAB04C2
+:1012F00066A6207FE86E168F08E37968222F3751A3
+:101300003E2E058E2EE44322F0019BBFEF403C258C
+:101310008EFC56A53039F31748612BE497AE246153
+:10132000EB0876659BDB12D79F5198C2F359AE5CF0
+:10133000C573EE5471EE5E163B77AFDD749E65218A
+:101340006FF7788A9DF181F7A021DEEDE7F2B0D842
+:10135000B38EC4E25971FE8FDAFF3EFA99CE8C72D9
+:10136000FE8E886FEDE6FB9A2B2F5902F1FA3F9023
+:10137000A2209D9ED5AC71C7F700EF6FDB141F9EB6
+:10138000B7DAF8B8859D17EF6E9C84FBBE53FE8AD2
+:10139000307F17EBFF622EA77E777807498138F5FB
+:1013A0003B4FC2EF87A8C536F0E591333734E0797B
+:1013B000B1BBFB295EF446C797C2D71BFFBE8EDACE
+:1013C0005CC0432765F4F7D4F4B27CF3A5C5FBF900
+:1013D000392D3DB88FD1FCFB2525B5411DD6E5A59E
+:1013E000F5911D887F7C9E72FC3D13E2DB86BFAFCA
+:1013F000326CBFA586B8AB6D90F17DDB8F7CEDF8CC
+:10140000FB206E811BF5FAEACCE8B96165173B76E3
+:101410004208C67C6E98F9DC216197A9265C29EC0C
+:10142000B13A123EA648C3FDCC89ECB1BD29DC1E01
+:10143000BB81DA6374FE6FB7B13C5BFF16A9188CF1
+:1014400046C7166922E8AFA7F83CBD5916C4F35B3E
+:101450001A13ECBFFBDF5CCEDE2C8BE03EA7366FB1
+:10146000D0ED1BA17C610ADB27A85E61E77EA87630
+:1014700096D73574E5F93082AFE7396D782D75323E
+:101480007B7BC1D5E7B2465A3F4BFC4102E3A1FA50
+:10149000256EBED80BD03EEC178CB0F32BD4A6F73C
+:1014A000ABE2C9B390C3CD6AE067A03F764A9BC266
+:1014B0000ED403633FD772A6FCF9F5CD554D3F918D
+:1014C00042EB7DCDFA0F1E908F1D41E3EF4E89EB6D
+:1014D0006B5AD08EF477772483BD7931297836859D
+:1014E000FBBB617F615BFFF376D4A726BA9BEBB9A8
+:1014F000CFC9E653F5B0F7E417BA67798C9FA4CE4D
+:1015000029F1F5437F07EA9F6DD5FF0DAE0F56C455
+:101510008F43662A15BF06FA556B811EB8B6F51FB4
+:1015200040FF714A92FE1EDC9729FAFBF0FD3F59FD
+:10153000F50F989EAE727D981FDDEF90689E21702A
+:10154000F1617E2CBD3E1F9D33EC814136CF7A5038
+:10155000BBC67976D2EB1A585BE8F73D65F1E3ED4F
+:101560004F717EA27286F982623F8CDF4DF478EB78
+:1015700097284FE75F7562BE7B2800FBBACE4CB25E
+:101580009003317A4E9C63D0D8CFECC281FBA50387
+:10159000CC2E2478FFA3AF790F407C77E5142EC7BB
+:1015A0007C3FC61DF71BF7498B766F4E95C6249F6F
+:1015B0000FF3728DA94C3E1F4FBD46F9CC60F50864
+:1015C000395515765DEB62F57E98CAF82C294D12D7
+:1015D000F9E9F94E26873D29D7363F4FACC8FDFCC7
+:1015E000FC21E441F519F3F51EE1F220F415ED6755
+:1015F00019CC17ED6730E9DAFA9959F205F0B1D84C
+:101600009720274B067F78C0C9F8E90EDEDFB38A42
+:10161000BECCC9E477B97364F95DE564F2BBDA69FD
+:1016200094DF5B9D4C7EBFEC64F27B9BF373C8EF51
+:1016300047203F90E7C8FDF8E49451EF505C7C17D9
+:10164000D4BF5891F83E6FF21B29C6FE58DC1B240C
+:101650003A5B2C9F89C50D14BFEAB8AFE34D637D9B
+:10166000EFF0758BEAB1CD50EF3BBCFD1DFFC6E836
+:1016700007747C3E8E5C0A3ACAB60637EC8B4DB4D2
+:10168000CE059C6C9D2BB7B17D17E4246DBFD03087
+:101690009E6D40B7A1F184A865177F3CA1B8E3E92E
+:1016A00036D617339EDD50AF18CF82ABA74694478E
+:1016B000BF904757448675DBAFC45F17CE38D9BAA1
+:1016C0003990AC3F09F432F397B886397F25DA1F99
+:1016D0007356A90843FF4A14A6078916E99163C601
+:1016E0005792DF20C61DB4C4FAD97AE3EBC9E79C50
+:1016F0004372F71CF2DF3EB69F87F2F58FA19DDBA8
+:10170000C7B956E1FEAF4F98DE7CEB4F5BAC69B4D6
+:101710009DD5197BBF03D75F3B59DE4BC3C51C2743
+:101720004C434F19DB17D938919DA7D62819CF55AF
+:10173000FBB59077AEFFAE41BEDFCA913FBB7C7C6C
+:101740005EBD40E9D3CDF5528F23F7DAF4D2DC2F1A
+:10175000A0FD955308E2E3C6FD2A9EBF25E4E67688
+:10176000985B760E820E79145FA5F7167A3F0846CD
+:1017700037ED47309B10F76C2C1752F19C04BD17C6
+:10178000C651ADE9E7E14AF5D04770A57AE8775C44
+:101790000FF57D1E3D7402C644BF6FA23CD40D7C84
+:1017A000A88479DE2FB747F8584BF28FC5FDBDA945
+:1017B000B6DE035A08F206F3D93ED544ED46C0DE44
+:1017C00080C49504BF6725AEE58FAFB58311B083A4
+:1017D000E23AF0A3BECCED9436685F83F62CF8FBBA
+:1017E0003FAF1119E3F0E6FA1A27F3753F85F3F3DB
+:1017F000C475685FE9578CFEB54A7778F7EC22F834
+:10180000BDB33BD83EAC2B77905585804F8204CE3C
+:10181000E154E915F23745BFBDA953193EE5FD5422
+:1018200089A42C2C88EA91CA7E12595084F806F3B8
+:1018300066A11E0FAF275808EB7D9A02F1BED712A2
+:10184000FC4ED3E372303F35C6DF584E8C7885CEE0
+:10185000FF0DA9E371FE6F4C65EBD074B8D2F92F80
+:1018600080EFFA9C4CFF3D2E0766C2F360060B41E9
+:10187000D3F2BE54C62FB352E77E7E3ED941D8EF95
+:10188000F202FFC6C6AB9FE5FAE1E8F8A00EED5400
+:10189000FD6859E724FAC986E6063CFF78C175FD64
+:1018A0009F9C85FCDB2C15E3818D8F18D7911F72CF
+:1018B000FCF3D2B5EB19C41154FF2D81767710A635
+:1018C000FF426EF6FBA30D13731E65F0911A9899F3
+:1018D000D1736DAB5CCBF0DCAEAF3FE79D0DE76045
+:1018E000A95C3F2F74B7AB6B615E21DF348E3E0F76
+:1018F0000EF58F6A6FC33A15FFFC97CD1C2752393E
+:101900006E4865F2BB16E6E785F1FA1DA97F41FC3A
+:101910002FF4505061FA86DA4D21B09B565DDE748B
+:101920001C96A9D5646F35C437285FFE2DF4F3CB20
+:10193000F643C7D94F12862641BB941FFF8E8F678F
+:101940000BE7C76F717EFCF6E719D7D753191F272E
+:10195000C29F02870BFC4DF5FC23A94CCF7B9C5FFB
+:10196000CCBAF10FA90C77079DD7B86EDCFA05B495
+:101970004FF1C641685F4F2523E2DBE7F8F87F9C13
+:101980003A846F7F0CDF2DB5EB3F81EB10DE2838FA
+:10199000F91BC8938BE28D7699E30D25D69FEDA7B1
+:1019A000F88BE7D5DD6999179513B53F3E0EA94F22
+:1019B0001DC2214751AFEC6638A47EA8DFBEDE30E1
+:1019C000C8E1242EEFEF307DDCA0F6DC09FA594D9A
+:1019D00067F3A8A4337CF92A9FD7F7A494B8FECD67
+:1019E000AE687B5DC85F5B587B72F22CF67B204251
+:1019F000AF58256C47F887EBD3D977A29D45FC2AD1
+:101A000070AAB99D5FA40ED95FBFC071DD2FF60724
+:101A1000EBEF40BBFE285D23B17405FD62991743CF
+:101A20004F8EEB12E1B818FAFD078EA789B5334443
+:101A3000BF607C3D7BAB4B167CF2BBD411F8A39FFF
+:101A4000F3C7C5287F5CE4FC31908AF884CDC3EDF0
+:101A5000E38CFBCEFF90CAE8B39BD349CC97B9FF88
+:101A60000FF2F743F4F09C7C2616D7FAF3D356AD69
+:101A700006BF6593ECB3D0FBFF032FADAD0C008028
+:101A8000000000001F8B080000000000000BE57D37
+:101A90000B6014D5B9F0999DD9D94DB29B4C924D9C
+:101AA000B281246C20D858032E21C42841264F022D
+:101AB000448C88888ABA014C42802422B6B6D5CBA1
+:101AC0006242785A637D142DB60B420B16DB88A94F
+:101AD000A518700382F80EB68AD6DB1AC4F25084B9
+:101AE00005B55D5A5AEFF9BE73263BB3D905D4B696
+:101AF000B7F7FFE3ED3D9C33E7F9BDBFEF7C334B18
+:101B00000891482A215790FEBF1C13AD17F38A7C19
+:101B1000D42779F208991420AACF46C817F0373E87
+:101B200054C629022129842C946BE29431744079A3
+:101B30008BAB6604213DA57DF36B22F4BF2789F5AD
+:101B4000BF21635D798A8BF6F7D27658DF49FF2D86
+:101B5000127263438FE8D18DBBE1A3C373D408F342
+:101B60007C37C944085DAF75A67B9FAB804EE334DC
+:101B7000B9379281FD1E4C94B1DF84A13E2981F6D4
+:101B80007BFD1451D6D37E374E13541F3D57253F4E
+:101B90005702DF578E2261FF32A8C338B96F4EA4B7
+:101BA000735CC69F57B988DA49E7A95288BA3542AB
+:101BB000BFB17C9F136223CF73139F672261F384AD
+:101BC0003FBF95EF6B4269E4F157F2F967389FAE7A
+:101BD0004822B09F7566805FBE592D56E8B81551F2
+:101BE000F0902A95AA80AF180A3A733E21B7D0B177
+:101BF000263AC1AD80735A3E2C7A2AE1B98782C356
+:101C0000990F94E01D0478ADB0A913605E7BAC5AC7
+:101C100005E538499D08E54FCCEA242809F113521F
+:101C200048C8144E3F53AC36BF184FFF51643EDED8
+:101C300067656D5F0C85FF3F53397C092102F10B0D
+:101C40005F5C02759F08F35FE1DAF78E40FB5FA1EE
+:101C50008D3B2A858DCB500EC7F1BA88FB42F86CBC
+:101C600037FFD065330D3CA7566EB779AC0087536C
+:101C7000B19E5AD867AB73BDCD45E1FDB2A7D3EA9B
+:101C8000A6ED1F271084E3E93875369CBB753B69C8
+:101C9000E8A4ED629CD0D2A9835F8362C2F5E62AF4
+:101CA0000C6F6F48EA5C986F8A556D84725A16C53E
+:101CB000139DF7D6E4BE457AB8DFC1F1343F898D74
+:101CC000BF4566FDC2F739973F2F96046F1CECC9DC
+:101CD000B6EF4331027F4E827F51FE293EAA4C9FD0
+:101CE000E1A0385B2EBA4DB42EE70A11F9D41BE2FD
+:101CF000532FF2A98BF2A99DD2871C993E82BC7FFB
+:101D00004514BA1CC3F7590ECF238C1FC1E9B6DCAA
+:101D1000D123123ABE98F35B78BFBA2491F1B19BFC
+:101D200054459AE787A17DFF10F7ADB07DE79B6B27
+:101D30001E85FA4C657F45226D2EB9CF319D380046
+:101D40001E2662C946385941AE491C4E749B04EAAE
+:101D50000BADAC2EC5CE2709B4CC72FA568D04F863
+:101D6000B599DD2E5AFFE0E80722A174B6F1A1D3A0
+:101D700002A1F2627B8090E46C98478619E1CFF46F
+:101D80008530703EFACC2569EB51D05C7994A81669
+:101D90004ABF571605A69278C378F2059DCF16E87C
+:101DA000F50A803F2BF1C65D8A64FCBB9C549C15F0
+:101DB000E74BA3EBC279E4CF880FCEA33A3DD564BD
+:101DC00024218981BE1F3563BBCD3D01CF456CC049
+:101DD0006FA1732E44FED3F625DBFA9EB89FF6EF73
+:101DE000FE3CD67D2F9C3B50798CED8778EDC0D79B
+:101DF00062B51BE43B2116DC9F89FE077C362E482A
+:101E0000F79BCBF70B8B14E8F64F069EE761B1E624
+:101E100015C0C7AD56A2C6E7A37C7815F86198999E
+:101E200076A0706C57049F97F66B7F68CEF26C902B
+:101E3000D7AB25F77002744EB60994CEC7D275EFB2
+:101E4000A272472E223685D665273B7FFB7D8E7595
+:101E500071023C97C84CFA7C6CC07F46A0708877B2
+:101E6000D6552BF41C321F2F50C0C178C1A59099B4
+:101E7000F940B7BD2241F9E0447868FCA37E8308AD
+:101E800087ADA86A08D057B944BC56DA5F70B279FA
+:101E9000AF2401910C033C504540CB52E2C6F27E88
+:101EA000D1730CCE6395295EE9FEAD26AB6F890038
+:101EB000F8AB79B50AE15EAE1CCE0DC9B368720805
+:101EC00020775883ABF8F5E55EC5A2C87CF58F1086
+:101ED000DFFC03F98630BD3C6D28933B7BEC7D3302
+:101EE000F57CBF5C61F26939976B44627CB65056F1
+:101EF000CD89E7E0F3D55C1E8E4862F2B39544E6E7
+:101F0000E36712D9BCD3EEF5B50FA2F09B9224B8CB
+:101F1000410F576CA99506BB42FD06717D989CAA9E
+:101F20003A60DDD6EDEEA33E07681F19F57BFBBBDB
+:101F30006406CC5FCBE5E7DFF8BC6712D93E86F0DC
+:101F4000FA41C13E23125CB213FBE1929D08E7F413
+:101F500030B88871A3027EBA0E19CCD7310BB84EB7
+:101F6000CF50261F872719D719CAE51F95FB1727BA
+:101F7000A2DCF76540BF97CD6C7FE1EBBA43EBBACB
+:101F800071DDF96CDD4920E781FF5DFB5E10757640
+:101F9000D7A4808780DD033C6C2A0CC97BD9E51768
+:101FA0005B687B7114393F8E9F9FAE330EF6455AA6
+:101FB000181EFDA9EA9550A776C17858BF67A88278
+:101FC000F2F2F54126B29EF2656DFAD0EF83D8D4D5
+:101FD000E6F95522A3879EEC76E72C8A2F3940DC60
+:101FE00016A4F306947BC55CBEB46EF71078EE1DA4
+:101FF0004465A66EBC1C986525363CCA3FBED0FA27
+:10200000533E6A0F0C4DF044C08B56AE5ACC44116F
+:10201000712DC0710BF9B8F07EB68777C5C1FC2B66
+:10202000A1FF370899CAF1430F8CFB9BC479A735F0
+:10203000B03EAE8FF6DB9E3BDBB01F7C4EF9A83D79
+:10204000F78938B097BA33A91E0039F5928872B271
+:10205000DDCEF0D89E5E47F4F66899D32F1E8679C0
+:10206000CECE26D329FE8A9D1E72913DB4EFE2DCCE
+:102070003AAFE0C0F66763E83CDF4EBC08F12EE7FC
+:102080007948A50DE0D249EAE8F965C52FBA695942
+:102090001620FEF105D09FCA7981CDE7B2EBE7218A
+:1020A0009D308FECA6F400E3027EDCCFF6A3E7863A
+:1020B000A32DCF6490DF1A5F52BBEE5EC07FB97272
+:1020C0004D79229DBF714B76BE48E7AF74F6C8B319
+:1020D000F2506EB7029DFC2A456D4BFC5FB4E7667B
+:1020E000109F19F03E218BE981294D826F3D854F6C
+:1020F0007B989DF018E7C7B12179B716F9AB48B3C3
+:1021000013D4C713CF6D07AF83E7E7B0837F06CF44
+:1021100023D8C19B12991DBC19D6A376F09389CC04
+:102120000EFE39AEFF15E1768D42343BB40BE673FB
+:102130002472B9FA7B668F86EFFF1E7EFEE5F4AC53
+:10214000BD4097924F6274CEF8F40ACEA7938E5298
+:102150007EC91B48FFDD94FEBD94FE4E53BB49CCA7
+:102160008E4E4FFE0BE4CB928719DFB73A7721DF13
+:102170003DCFF9B39BAFDF9D2B56033E5F26A222D6
+:102180000A03E76BCFF43841AE87F39F7AD648CF86
+:10219000654EDFEA7CE09B7DB3DDB0AD707E946977
+:1021A000593722B4EFC3C0876374F2890852E5053A
+:1021B000F021CCE319017646A204FCD74AD8BADE56
+:1021C0007D22EA89687C44E9E624E0AF1F2E006C9A
+:1021D000DDFE29DD04804E289F9DFA3AF4B28AD3B1
+:1021E00007F543FE0AF3E4F27A6D14FF4248EAD79A
+:1021F0000F4212F0F74CA687B2135D4847B5C421D1
+:10220000837E51C5CC2C902F745E7312EDFF66C295
+:10221000B9E7B525F5F39F0DFA93BBD8BCAF809114
+:102220003D66E0BC1392A8FD11619E0CBEBF1BA3CE
+:10223000F80B399A7D92D76F9FA4C37A39C037744F
+:10224000FD1D29EA60A86B7C53CCED961705A35EB3
+:10225000BEA4DFDF677A2E8DDB2F644EFFBC390012
+:102260001F0D9E9A1D50CBE583364F2EE7BF614967
+:102270000A1BDFC0C63BA04EDB2BB9FF44E172292D
+:10228000C2DBCA9E9FCF2F7A4061718B3ABE2F2945
+:1022900051D1F41BC2B52A9ADFA584F43FAEE7669C
+:1022A000FD4770F8D07615DBABD93EC62A0CEFE1BE
+:1022B000F18368F8D1E0EFE4E723B96C7EE2ED87C3
+:1022C000DB64985FA39768707B3381C16D9206B71A
+:1022D000363E4F983C5825755A9508E7BC91D3ABCC
+:1022E000568FCB35CA8768F1943121F8D4221C0A65
+:1022F000D8BEA3C5572EE7FDAF4CEA875F038EB368
+:10230000B1FD3EC0E5356D9F87ED196CBE3B42EDDA
+:102310004DD8EE64FDA3F9FD7770FD3537A97FDC5C
+:102320009D38CEC1C685C713B4B299EF6F7E68DC05
+:10233000DD382E878D7386F0BE18DBAB58FBD78D4A
+:10234000BF39F9BADF0DC16515F2BDCACEFFB7843A
+:10235000FEF6EF637B315B379AFCF85B029B6F05FF
+:102360009FEF4AF08BE91C8941922B39C06B8A752B
+:102370004FA05DD282AA1FF447E967B20BE47485CF
+:1023800068F30A541E4B2E2BFAC9311251C1AFED1E
+:10239000F9FC5BCEBE3CACFB41AF2F8B29B182DF99
+:1023A000B93C5B72833E2C794062FEF57113CAFB27
+:1023B0004A713ECEB34BD1ECDCDB0D7EB44B715594
+:1023C000C7C03EAC227131FFBFFA2AFA7C3C97D7D6
+:1023D000BBACC926986F6C268B178C77D5A1BF4EE6
+:1023E000CE323F5AA5FF31F9ADA25E96F93829A346
+:1023F0008508581AFD6D99AC3E258E44BD8076D473
+:10240000D880D1FF965D9547607E99E8C6D175BBAF
+:1024100093EC0EB4A772C8F02F28FF58720562A182
+:10242000FE4585E4F1031E26BAEA94527A1E4B86D5
+:10243000C70A7238C7EC1F0CF184B60CD9ED05360B
+:102440007CA8DC9A0DFE5607F5CF110E6AD2352313
+:102450004278B214AB04E890E204F9ABBFB4B132F5
+:102460002599D1F1F1240BE2B382D7B5E7E1782FBA
+:102470004C8E65728458BD1FE6829C104802A5C32D
+:1024800005A42F0BE8312D9DE98F26535F2AD44FE9
+:102490009240AA8396AD1D525524FFE727DC2F5B9F
+:1024A000618A6C2FFDC43CF17D80830471834B31C4
+:1024B0002EE0B10C0BC50F347B558B2344B35BEF7F
+:1024C000176B8EC13C82E23F03FD07DABF5E76EEFA
+:1024D0000C26A7B552DB472D87CBE0642B9E6FE718
+:1024E000DD6564960BF1F439C7D3BECB002AD973EE
+:1024F00014C0D34BD98FE4405CCA9AFD9003F8B363
+:102500008A30FBB4C205B29890476D9EB3493AFB3E
+:1025100066624E2DDA4DC5592D684F2D8BE2977EA0
+:1025200047C38F4627368F39790CC4BF165A61BC12
+:10253000A4D4C442B93338154B6AF75AE0F9B20C47
+:10254000563F1F1EDEE37229DAFE27805E80784D3B
+:1025500046FF3952607EFADC2BE787CEA1DB5F7A3B
+:1025600072CAC0FD5993993ED2F625E570BACC35B2
+:10257000D25D4D32933397246BFEE205D3DDDB173A
+:102580004277E1E79D98BDA8EA6212DABF765EED78
+:10259000FCF4BCA3E13C15123BFF46C5A3C21414D6
+:1025A000CE05008701E7B246D6FBAE64D397E5A31C
+:1025B0004792865DF879BEC4BCD393BF049CF68C69
+:1025C000539D204FDA52287D523CB509ACD4FADB3A
+:1025D000397D3EC3CB2F2327867F89F39538851716
+:1025E000401F8EF71C2C8365CA8B4781DA017EACB5
+:1025F000073C94E63D20CDA2F5F6BB67A3FCDC3397
+:10260000AE05F7BDCC6EDCAF56A6707C1467A9C8CA
+:102610007F6D9CFF2A08F323B57ECFF37385F347C4
+:10262000F87CE17CFDA84DBD0BF69592CCF61FF22F
+:10263000FF7A45BDFF57CAF5D738EB1D86F8C73876
+:10264000EEFF2DFB6CA8CD4B0F7A9AEAB57F8AFF7F
+:1026500077863E013F29A3D4AAF7FFDAAC65D8BE3E
+:102660002C53ADBAD401FA5874DF4B107EE80F7AC0
+:102670000551D918C11F5C9629FBC7D3E71685FC05
+:1026800014F65746F525C45F2C8A4A2E1A31D02FEE
+:10269000DC652D23103739AD9067C11F3BDF7936DC
+:1026A000271BFD4209FC423E3FFA854A0BE9C378ED
+:1026B0004F1901BB06DA5D2340EEA8C463073D4213
+:1026C000FD429D7C3A6DBD03F93D7C3D2AB79E06D7
+:1026D0007CB5298C8FC3FD413999D9C19A9C0DA72E
+:1026E000870A27A39B18BA7533931BDB9323C8FB78
+:1026F0002F2F9FE694830B703D59B2075CB5EB8298
+:1027000001095C9E6F27337EAAB13DDD06CFB5F986
+:10271000C3F1434FAE423C1DEC1916BFA1F61AB5EA
+:10272000A3CCD45E5B2984D65FC6E11D0D1FCB40D0
+:102730005F47E0A303C9262E7FC2E3447718EF5F0B
+:10274000142F7114B2B83E89007F91DB49CB29BFA9
+:10275000C0FDCD32B3DBA9009D6616BFE3017F3E0D
+:1027600053C6FB0822B538AFB10F3CE772889F45CE
+:10277000D8DF9F939310AED60C93C13E23E41E8303
+:10278000FD18EDDC84EFCBCCCF25003C73F5F00CCD
+:102790003B77B982E706B31EE68D37B9899FF245CC
+:1027A0007C1671A3C08A37611C56E37385F3B92682
+:1027B0000F6C0A1B77B56318B3CF445B40A4E75F87
+:1027C000E5A0F6349DA755DD857A551B9FC0CF6FD8
+:1027D0001BC7E28D36BB5F5122C0E17ECEE7D1CE72
+:1027E000D9A14A89E5747FF72BCCFE96C6996A7CFD
+:1027F000188F62F15A85C34E2C29B082DD3E091C28
+:10280000F814D8CF56451FB712F97EE2EC743FE7B3
+:1028100090932BC2F61393DB570EFB97B2552551BD
+:10282000B7FF0A876607F4227F479BEF3E2EE763D8
+:1028300072DCA40EEC0D9BDB0FF75A316A5D218828
+:10284000C5D85C3799AD6B8F550B475B7474D891C5
+:102850002947BC8FF82F0793FF7649AD81717645E4
+:1028600022704F66E7F672B479A3EDE37CEBDDC42A
+:10287000CF3B603D5764BB62A883C90D69DCD61AA3
+:1028800090D36484448647D013290EC6A7F1729F63
+:102890000BFC754A8F9E48F3890E99C3FB5FC41FDA
+:1028A0009ADD5DD2B56F28DD6FAB4D720B20BF8A0C
+:1028B0008EF6BA74F0A17A7D9643173F106D1E9480
+:1028C0006FA28BDDBB575998BFBD679CF19EAC8151
+:1028D000C3EF7D5E46930BE31D9A3DF6AF39E79754
+:1028E000C55F05E04E07970E800B01FEFA415B6B5A
+:1028F000047949E1D3FE55E0B39AC3E5694ED7D1D7
+:10290000E033CA61FA97D241387CCEC7D7213EF373
+:10291000914311E0D86A97D3671BF8BF03ED904845
+:10292000FDEA74E78DC6871A7DDCC4F14205A42157
+:102930002E203BBCBDCCAFBCD3A8E7C4F96E2E9F04
+:10294000C9590AB744DE3FD146FC71F1A1F9E572DD
+:10295000633CE179078F0BC4901880CF69F754016D
+:10296000F2142CA699A394A1B04487007A2215E60C
+:102970001949C8035C7E86EBC11495F9C983498B5C
+:10298000C0F44A06EECFC1F711AE07D3A95F03F139
+:10299000183822F8D38369DD0A360851F11E5CF03D
+:1029A0009AD05F76129F00F367903E2C87402A02F0
+:1029B0009D3F9BF40A39147F0F54D48D02F9FD0E0C
+:1029C0009CE392D039CE678F6AA5667FACFE37C193
+:1029D000FB93B07DFE1F82F792321DBCE51423DD10
+:1029E0007C597837707887C7F38A219E970DF13C20
+:1029F000FF6EE053F92CB33F7AFE2E637CAF2D9B24
+:102A0000C5F32AC4EA35780FEA92D1FD9072FB56DD
+:102A1000419E936677A2CE1B168AFB594FFD4082DA
+:102A2000380A918E229CF06EC885F22C3B05E53168
+:102A3000B323C6F3FDCBD973AC70EF1DF29FFC221C
+:102A4000B33798BD24733A287696A2FFD276F6DC87
+:102A500076C785FA493BA53D787FADF947AD8159E9
+:102A6000E82F858FF34BFEF7E0FCFE80EC827C9331
+:102A70006E7E2FD67D6AAF214E1BEE076976D57824
+:102A8000BEFFB28067DFA570BFA5CC222CBEC9E017
+:102A900020F375DA9CA7F11EFCF9B326F4B74E7348
+:102AA0007FAB18FC2C3BF377EAEC03CF794DCA459A
+:102AB0008638BCE63FC138C8AB2B53FC22D8739A8A
+:102AC000FF04ED2EFB40FFA9CA127805F637E51585
+:102AD00011F342A2C137DC6F0AD73F335398FEF996
+:102AE000560A8F1784C1538BF785DF4BB76BFC27D2
+:102AF00079053DFF87AF2FEF9A88FB278A2E1E3B73
+:102B000034144F14542FB92B3F143F8C10376C01E1
+:102B10003AD4E2869A1ED3E8D842FB5AF19E397223
+:102B20003CB13B7BEF30E617BE900CFC59A1B0B82E
+:102B300091B63FEA17DE93A2C3477180E96DCB7F60
+:102B4000B5F42DA1F02549C4CDFC83169795D62B5D
+:102B50001592BC12F9CC86795AC50E01F94EF2C70E
+:102B600060BDF2B8DB1743EB965D2F89A203D69BBD
+:102B700045628410FD68791D6D810F5601FE4E1F60
+:102B800097DCE7F2BB2B218866F0936243F844F9A7
+:102B90009664A83F22791E4D413B6150689C08F91C
+:102BA00060430DF967CF48EA63D06FBA55FD11F65F
+:102BB000FFCFC3FB2F53305EBCF72BE13DB40ED3E8
+:102BC0000760B39174DD7A36DA7839ACE342FAEF14
+:102BD0008F4B2F22781FB309700671964F880FE232
+:102BE0002CCF995F14411FB5F379AE201D2E7918B3
+:102BF000DB2FF4DBBCD1B90EE8E2AD946C9CEF396D
+:102C00009B67F528DABE6F83340AE236ADAE67AC57
+:102C1000903FBB6B637B469F8EFFF66DF60C89E49D
+:102C20001F6A25FD4B3015E1B9E259A98A2627B65E
+:102C30008B501F609F6DE852609DCD1BAD3322C548
+:102C400035E454C6EF576C60766D55AEC90DE2ADF4
+:102C50009878A524B88F7113B79F36C48DD8DA5BE6
+:102C60000ABA285BC47B0D5ADF1D4FEB716354F425
+:102C70000F2E1EB115C75FFC49A99BE5517A6DF96E
+:102C8000B4BE2AB774CC4A5A1F12EB39067C45F5FC
+:102C90004C8784FAB4330EF200E2464C4D59496B2E
+:102CA0007102A98964E7FE3D85D9799BCD1A5C251F
+:102CB000CC83DCB55146FEDA972EE2FD1385DB7C32
+:102CC000A8FF393D8E504A24E5AAB71CE058413A86
+:102CD0005BC19F2A775DF3423CF90AF02BD8AA002A
+:102CE000FFAF8A6287BFC5F7874284D2CFDE0D6D02
+:102CF00037920879D4FD79D671AA2515EE57F8BD1B
+:102D00002E714E45FA898EEF7B99BFD9E96F8DA55B
+:102D100070BC624BC720FDFCEF42D0356520BE2160
+:102D2000FF995C0AF9B71ECCA76D3D6A42F8BD9CBD
+:102D300027F8040A9FBDB922B5D9E8AE72ACBEE14E
+:102D4000B4BE9AD371F596FD6D8380E5531DB8EE40
+:102D5000CBB94F58597EEB85C7AF47533E6884FBCC
+:102D6000648A8F094AACCF45F1350FA6A0F5718A68
+:102D7000D5E7A7EBF5D87BCB12E812CFA508EEF587
+:102D8000402FB94401F9812E8889214AA175101973
+:102D9000484F0E82F95CAB0AF3D6435C6C6586AB98
+:102DA00013F20D778CB062BE59783EF10EA1E58525
+:102DB00044884B250A28AFF7E6BE89F7747B332C8D
+:102DC00004E815137EE9F3B624C6A7710546FBB3E4
+:102DD0002A359BFB9FC46B290CED2B2EC7AAC6502E
+:102DE000427A31918DDF9723F880DEF6B9B87CA066
+:102DF000E7DD080691D4214D1F111DAF2F0D9FE077
+:102E0000D2EC62413BA769E0399E137CCB87C23983
+:102E10002EA6E7A0757BAE80EBDB9595B7132C8BC8
+:102E2000EAE11E337CFFF7A632FF50A664970BF24F
+:102E3000AD73F9447D7E8C5C74FB145B3CE631A180
+:102E40005D99962BE079261E65F7B903F2B315E27A
+:102E5000910DF8A156476A68BEB8CF9EFD36E4FFD3
+:102E60004E2E12FC31B01F9EDF4CFFAF07F48B9C3F
+:102E700053CBF2AF73D7E179261599DD709733C93B
+:102E8000E6EB28A5F5978E4918CF9E9C3301F3AB4E
+:102E9000C3D75FA9107F1585EF4B7912C23BE6A21D
+:102EA00027709ED7F34C286F26433E36E42FEBF372
+:102EB000AA511F1AF3B9278BFFAD9640B39BF12B94
+:102EC00091BC8340BE4F711AE1673F6ABC2FAE2EA2
+:102ED000B018EA93F3E4303DEC457A793193D1C5EB
+:102EE0008B170BBEF5D9213A9B7434C90774067F42
+:102EF00062A1018E8673C6056415E0B7EFE29F3DBF
+:102F000008F72471AE65B7E33D3887BF4627711CCB
+:102F1000EFF68C5F7F1BF49406FF703AB870FC5F8D
+:102F2000535302F82FD0EEEFC3F01F866F8C416A27
+:102F3000E7183610EFB87EF6407C6B7430E0DCF7B3
+:102F4000752D1F4AF1FAB29D3E003CAF937DF70A02
+:102F5000213C9D17AF392548372B950E1BC8FD988E
+:102F60008B0ED9C03FD0E88288DD057A7BFF9F8534
+:102F7000EFD2D5027326DD820FE27A6FC0A3CB4376
+:102F8000EBBC98DA9FD7F5622AD855352C8FA3551C
+:102F9000CD67EF5D15307D1A2E1FFE902AE2B81E18
+:102FA000F38B19E7CA53ADB67908DC8FB542BE1D65
+:102FB0003D9FBCBA16DE6820F2B45A949764B5C03F
+:102FC000F2108A7F8BF27D8ED3B75488B01E5A32AE
+:102FD000B84F17937BC5C9D89FCCD0F2926ADEC791
+:102FE000FD4F63F50BDDD76BFFA47DFD9ED20A8BF1
+:102FF0007731BBF96A1E97D7ECEE2936967738A55C
+:1030000058447CBCBE41F0617E24EDE7A574D2C873
+:10301000C9F66A6E079E2E7AA67D940BEC41D560A8
+:10302000770AC53D68F7251419FDC14435D680FFE0
+:10303000E4AA24433DA56690A17FDA8CA1C6B8829C
+:10304000E79B86E7831BF20DF5CC962B0CFD87DC06
+:10305000556AA8677B2719FA0F5B3ED5501FDE71B2
+:10306000A3A1FF37D6CC323CBFD8D768787EC9A69B
+:103070008586FA88CEEF1AFA5FBAED5EC3F351FE89
+:103080009586E7A3F7FDC0501FD3FB98A1FF65EF1E
+:10309000AC373CBFBCEF49C3F3B147B71AEAE30210
+:1030A000DB0DFDC7077719EA25E41543FF32EB6F07
+:1030B0000DF50AE53D43FF09CE4386E7135D1F1B6F
+:1030C0009E6B743039F75343FB55EEBF85BDA75354
+:1030D000C3E21C100F18068F3AB08C259DEC5E875A
+:1030E000F462F960A1A73C0DE8F3C7DE7648486AB0
+:1030F000F506FE0857D3AF170D4B60F6934AF4F26E
+:1031000053CB4FA57E8B378692427C90D2ED684A96
+:103110007741014B2548256B32C47B62B04C0A26AF
+:10312000637B7230114B477030B6A704D3B14C0D9E
+:103130000EC3322D988DA533780996E9C18BB11C49
+:10314000141C8DE30607476199111C8BED99C1CBC7
+:10315000B1CC0A9661FB90600996AEE0642CB38313
+:1031600013B11C1ABC16FB0D0B5E83654EF0266C6A
+:103170001F1EBC01CB8B82B3B1FC46B016CBDCE08A
+:103180003C2C2F0ECEC5F29BC13B70DC25C1DBB1C0
+:10319000CC0B7E0FDB4704BF83E5C8602B969706F8
+:1031A0009760E90EAEC27EA3822BB0CC0F3E88EDB5
+:1031B000A3830F605910FC11B68F093E8A6561F038
+:1031C000092C2F0BAEC3B228F8732C2F0F6EC6F24A
+:1031D0008AE033386E6CF0692C8B83CF61FBB8E0EA
+:1031E0006FB0BC32B81BDBC7077BB05483AF607BCA
+:1031F00049F0252C4B83BFC5F6B2E07E2CCB83EF84
+:10320000617B45F05D2C2B8387B09C103C88655515
+:10321000F0632C27068F613929F8298E9B1C3C8589
+:103220006575F06FD87E55F00C96FDF22E6ABEB231
+:10323000C784FE2CF753A3FB0B5E949766FE5E1CBF
+:10324000E45663FE7F8BE0C378A1A3EF05A89B8BB8
+:103250002C182FBC9904F03D813F903E3BC8D39E73
+:10326000CB8F6440BCE9F5147FA63EDFC1CCE30000
+:1032700015E27109FCD5298E5D29A04F6FA6CD906E
+:103280006744D42F300F720ACF83BC59A20E16DDCB
+:10329000EA7E98E172ECE7B7D0FACC6AA2E6D3FEF8
+:1032A000ED975B30AEDF9E4FFD205ADE97CDF26585
+:1032B000BBD298BE7C2A8DF9A5CFA531FFEAC942C1
+:1032C00096C733F3F6E18C9FCA93CFE33731387C4E
+:1032D0006324CFB3B505B2303FF602C79D48E57908
+:1032E000B5BCFF836935CFA7D1766F29C96DB1858C
+:1032F000FAD1F65D51DAF7803C086FDF6562F8F0CD
+:10330000BE2D723FA12661EA39FC84D717F77EF300
+:1033100085E1A1FA1B51FC504296B0FBC35DC7AAE0
+:10332000AFA7FAF0EA22D14D2507F9EFC5DBC67D3C
+:10333000389CAD0BF999DE5211E317338BF7EF4947
+:10334000A6F5998B1231EFBE7F5FA5667C3EC5F96D
+:10335000F6375FA047BFB9E537E33E34C4453D6863
+:1033600077DDC16994A8E6BFF669CF915E59DCF7B5
+:103370000E58DC05F2CF8CF3F6AA66DFB9F263884B
+:103380006A21AA81EE19BC56C1FEC1F7275613ACBB
+:103390001BCFFB50B8A2DEF7C6CBBE56019C7757B9
+:1033A00002D05D5C5E809C2BBE0CF0943051A1CFAE
+:1033B00006764C3478A63819FD2514AB4E2FC54F30
+:1033C000DBDF45BCE7DA9D58A800FD7FDF9693065A
+:1033D000FCE174327A6DEB7917E35B090501E2B524
+:1033E000B1FB739705E2F8562C972E7663D9B6B8E1
+:1033F00008CB95193FB042BC444C91201398C4644B
+:10340000CEC17890B6BE397196B5C44DE75B63A95D
+:103410008610920871066A2224D2FA12EA539C4D51
+:103420006374FDBAF3431BF0C3D93417D64513BBFD
+:10343000378E2BF0AB909710E7564A2557A81DFF03
+:103440001CD8BE1EFC91D749DFEA6B018E2A7B1F78
+:10345000A395BF6FDA5A329CC3551B1786F7303CD1
+:103460008BB21BEFADC558DA3F2F3A5EF39C2C2F81
+:1034700001E84BA2F4F529DF3751E34C309F86DF9A
+:10348000D35200F3A95A85C87997851ADC155539A6
+:10349000D73D0A51A4BFEAE5A92D6F5B183DDB506B
+:1034A000BE621DF2B9B8BCDA9BA6163BE9FC8BAE36
+:1034B000E472202309E5006D9F7E056DDF66627E64
+:1034C0008A3749467EA14048803C5F6275254C3D65
+:1034D000471EC4B2C58A2A99E17EC09500F05AC63B
+:1034E000F3F5E00D65BD1CF857F50BC90B1F9E2BBE
+:1034F000BCFF3613E7ABD8183C97C8E1A18D9BEF12
+:10350000E4F238BBA6D689F1115706C8555A9FED8B
+:103510001C83E7CF00BEA2F5DBB0AEF4D7EBB1BFA2
+:1035200093F5C7449A0B90C3745C138E93FAE769C2
+:10353000C1BAAD7FDD85B88EA3BFBE08EB19ACFF65
+:1035400085AEA395FDE77F93C9C9CF24352189C2F4
+:10355000A7E6AED935E5546F5F7BD75C2C3F58DCCE
+:10356000AB825C3D4CE5491B856B4DC93007F83992
+:10357000D75E35CCE6D2D16B3D8F6BEE5A6EAE0284
+:103580007D57BA42ACD980FCB4C49037B7CA69E65B
+:10359000FE0DDB471DE5F1BB29C9D5AFD9FFCD36FF
+:1035A0009D3D3A8BB865A0F7D9CBCD21BA263AFE1E
+:1035B0005458DB3693E7FB37C039568AFCBE82F39A
+:1035C0006B22E1FEBC2BB5E61C7A872CB7104F04AA
+:1035D000793C103E84FC95F2C167B61C8CCB524BF3
+:1035E000CD1A695E0D4ED1D6AB8F12FFD5E0A4C1C6
+:1035F0005B6B3FB47AB4C2EC6A9F018EB3EF1B835E
+:10360000F1CA7A1EAF278956CE9FAC5F1D5D672B2E
+:103610008C935417D03BD423C9176DDD3AFAAFBB56
+:10362000F323C197C361A599E9F130F81E5E333CDD
+:103630001EF45038FE2E14CECD1682EF530436DA27
+:10364000591CC93103E76FE0EB13C74CDC4F035F34
+:10365000EF859D717E13ED5FBAD1BE1EFCE093A590
+:10366000DE476A403EAD37633EDBBD3B57BDFD23C1
+:1036700078EF639D19EF4CE6C63D5C08F7B1A7B83B
+:103680009EA30AA007BE9FE021DA9F2AC0FCF58412
+:10369000CD7F52BBFFD89880F03C5ABEA17D2C2D27
+:1036A000FB762CA886B8CB919D57ED05BF796E2C83
+:1036B00091D231BEAFC8C87F5EF38746FB400AD5C2
+:1036C000C581F57AA8EBE247737DE60FF5743E6F8E
+:1036D00093B1AE8797490F2F57B9115EAE0A03BC5D
+:1036E00084E7ED7E5107AFF298E10ED0EBEF3A5D43
+:1036F000088F8698A5A9009F861D2BB09CB729C668
+:10370000FBA16EDD059D89867AF3B674AF5EAF9C32
+:10371000DEF7443CD0E142A7E8FD90EAB9E38BD55F
+:1037200056B0634E2CAEC252C3FF82CE6CAFCD30CA
+:103730008FB17EBA43A862F2D99530ED1CFCBAD0A5
+:1037400029E33A1F6D62FEE6478BAD5E58E7F862EB
+:10375000C5CBD6757A991DC5E035FFAE38EF87A386
+:1037600043FB8B36EF3F7B7FD4C22787AC04DFD986
+:10377000F9E21C7A3BAA5C923E93517F749BFF0C4A
+:103780007463A5FFFB02E3A812D6B5799B3B452FD6
+:10379000E41313B2C5B01E1DE73AACE3B7E87AC133
+:1037A000F89D8971100B43F9CCEE413C700F42E754
+:1037B0003B29D996431C41BB0769868568DF05D63E
+:1037C0003ED9439B3EE91A76CEF7CC299EB2412FD3
+:1037D00037583B6450B60D9D1797033F7DD2D59A5D
+:1037E0000AF2639E78FA5B91DEF7BA3E9DDFCFFB6B
+:1037F000CC01A3BFE8D3F6992D19F88CD8FACF4D98
+:10380000EBC7A3BCDF53CBE76DDAB2BF722CDD7F11
+:10381000D3B65332EC232DDD539B9E123ABFC0EF3B
+:10382000811A371D94E17C47CDDE8BBE772EFB7E5F
+:10383000C03E6D4E43DEA197F4027FCE2A221AC30A
+:103840005EFF1E9537C75E3113B83F2467692FFAB4
+:103850003C8B3F9D436AE2015EB3BAE6A1FC39F6B8
+:10386000ECE4BD2CFFA8A310E8E31362C2F7DC3F31
+:10387000216FC68FD6C16F75BA963FC9BE6FA3E5DB
+:10388000B7D00DA6637E7A437B2FBC376621929713
+:10389000CB25817DAFC627A03C6B60ED5E625D826B
+:1038A000E758CEE49197FE07F5DB3A8CF2A97E8DBE
+:1038B000B15E47A6A6427E77DD4366C8202273F537
+:1038C000F28FC2EF8E7466D7D7939676B0E71E97C5
+:1038D000595EF72C854883A91E5AF0EBC70B6B691C
+:1038E000FDC17476BFF311F733E0BDC774FABCF1C4
+:1038F0002E9FACE60D3CDFA1AED1D3C7129C8FE961
+:10390000AD46CD6E252E88E30F867F0D8D7EFEC1E0
+:103910005D22DE3B0D86769D7C9EBDDC78BEF39DF0
+:103920003FFCBC84FC00CFDBB8E91AF4DBB4F368DD
+:10393000F8D2CE63DE14F93DDF27D30583DDB49DD5
+:10394000C34FF3BB9F0FABBF10567F299DD9F72103
+:103950003F9DD1B799F337A5FBE781EE1758039543
+:103960008C4EFA64FD7DA81CEAF7C2B9FA5938BF3B
+:10397000D07E2FA58F89DE2F2634DFEB91E65BF01A
+:10398000EBA79E057FB4F1970FC7C365D031A9237C
+:1039900015DEB398BF71693CC0E9A8E48D07BA3958
+:1039A000E613AB22C14B1AC4E506516D02C57B93E9
+:1039B00046FFC54BA6807EFFF346B3027E61F32629
+:1039C0008B1FBEBFD4D43517EF6B68FD20AB2FC360
+:1039D000F72A9BB7993FD0E3B5F1670FA7627E073F
+:1039E000F10E66F7E9FEC1F0E9A0A60D7FAA043F3B
+:1039F000B99904909EC3C7C1FAC12494D7B572C2C5
+:103A0000C0E75ADCB4993591E6AE55A7206EDADCF2
+:103A100035F108F07D33913ED0D35303D034F557C0
+:103A20003E4FE779779791CB40BE68F020BE149463
+:103A3000CFAD9B7F38F220DDCFF10DAFC40B7A7F85
+:103A400095DFB79FEE9CFD7EF239F4C3094AA7FAD1
+:103A5000F73134B9EBDA46379046ABDDAC9C6FF604
+:103A6000C78FA5709DBFCE8CEF87CE7FEA899F3E22
+:103A7000067944EF5AF0FE63DE537BDEBE82D6E762
+:103A80003D6D7654B363D8E03E58C34B33FD1FDC25
+:103A90004F6878687C668F0CEFCF403BF8071A3E82
+:103AA000E63DDD23931103E157D6D923F7D922E070
+:103AB000A5F36025BE67B4F92F32E0FDD84E81A48E
+:103AC000650F1CDFB06E0FDA310027C423C7533FE8
+:103AD000DE06E0CB3F657B01F653406E9F0F5F072C
+:103AE00040AFA6205DFF623BDD47C3EF2D6E8043F4
+:103AF000C32FEE8887F31C915A187D3FBE3415F210
+:103B0000DC1ACCDE54054BD6DEF0E33B91EEEAF74F
+:103B1000DF99CAF20ED5749EDF910EE7BC6DED758C
+:103B200078CE3AE241FA6B785CAC813C98CF255272
+:103B3000F57404FEB89BF3C791F514B9F49C4740A3
+:103B40005E3A42FE8EF65EF39DFD7110760FF939F6
+:103B5000BF879C3A48CB5B67F2B79F6E372C43B95F
+:103B6000FA51A69A06F793140E9A1C45F92AEEAF5D
+:103B700048637862F218C751FA2B8376E8DF6BC688
+:103B80007B61DD382E3FD9FA8BF8FA74DFB1608F94
+:103B90001C498DFC3ED0A67EFEA7FA5647673A3EEA
+:103BA000677CBF6105E3738DEF7DD754C1F3CF7E92
+:103BB000C7F808C6813EA2FBF2A7E1F39E6902CADC
+:103BC000050BF147E2EF0D66CEDFC6E7D462477B17
+:103BD0004EA313BA7F09BE4716A217BA4E12E201CE
+:103BE000ED95BA87E8789D9DDD0CEB623F39D49E58
+:103BF0001DE2E37A2E0FBE3DC8280FC8DA940B8A67
+:103C00000BCC37FB7EFA18F02FE557AF0BF8D78CAB
+:103C1000EFDD7CBC65F7DB37523AFFB853E35BA3BB
+:103C20003C0DE7DB86AD77627C309C6F3FCE682130
+:103C300011F93683BF3717CEB7197DFF5679AAC160
+:103C4000EF2761F0A3F2F127DB5DD1E1182E1FC74A
+:103C50000E72213CC3E523FDFB1D291C48871AFD7C
+:103C60006974D7F8F30543400EF5D3A7467FFDF4FA
+:103C7000A9D15FF8798DF01B20DF20D949673F98E3
+:103C8000EF255E3BC577608788DF4B3AE90AC4437E
+:103C9000FC67690CB915ECF0930AAF27B27A20459E
+:103CA0006E0739A1B5076258BCF2644D203E5167DA
+:103CB0005F1FEC16E321BEDBE78BFC7D37CC48A40D
+:103CC000EBF745F9FE9B168F38191B3F12D78BCDAA
+:103CD000F201BE2A445BD65D9037DA21E2777CE6BA
+:103CE0002CB93E1EF2434E760FBB7A066DBFED2512
+:103CF000FE193FAF2AA55338CFE6783F4ABC8F1450
+:103D0000D3F3CDEE66F6F39CD591E944BB37AFB360
+:103D10002D92411E51BB35441F049EB3EF2C34AC91
+:103D20000D6BEF9E8CF4D418464F1EEE1F1D1BC466
+:103D3000F3FB479151DC3F31E9F3412AC4BCABE1CD
+:103D4000BB9C27F789986F7DBA5B24ED70CE2D82DE
+:103D50008F007F7B53902E9BA8FCD0C77F8F03DD05
+:103D60009DE33DBAE3BFFA43E1F76897F9CFBE3769
+:103D7000F247B43CFEECBB173D07F55F1FC87A8FD6
+:103D80000CEC5FB6F3CC2D20FF4FEEB4108CABECF7
+:103D90007C31EB7B50DF6EC1BCA393F75A54B4A7C0
+:103DA00077DA318FEE64268BA7B6EEF8CB48CCDB02
+:103DB000266D8837C760E6779CEEFEDB1FF1FDDAE3
+:103DC0006E7A2AD0B73BE3D01E6FDE1EE30327F5E1
+:103DD000E48EBF14EAEF2FBEEE799A6416BF3F69F6
+:103DE000273320EE753291C5AD9B9FBBFC892574AE
+:103DF000FD055D3D32BCB753F6FCDF4782BC39B9E7
+:103E000095D91127CC7D3F266E42860CBEE73E3306
+:103E1000C5D709B0ED28AF3C3778E755DEBC487010
+:103E200061703849E100E7A270690039190D1E85FB
+:103E3000FFB1F038750BAC3FBFFB32BC7F08C1450A
+:103E40005059BBDD6715F0FCAC7DE75F46823CFE58
+:103E5000B87309EAF7F39DFBBAFFE7CE2DF82FE41C
+:103E6000DC8BFE63CFCDE8FFAFA09FC60CE483815F
+:103E700074FEEB6F61FD177637EEF702F9FF21381C
+:103E80007FCA7FE2F9BF22DEB70A98BF723EBC3F0D
+:103E9000F31F7BEEF3E1FD258E77BB0279122777C6
+:103EA000FC3D8BE8CE7FBE73BFF97F94DE353BA827
+:103EB000D7D4A214D0FDBD4B3AAECBA6E51BEAA7E2
+:103EC0000E705B2D51EE694C19CCAFB0082CEF9BF6
+:103ED0005C2768F1A55E43DE534603DA1B53D4FB2F
+:103EE000D8F799A4965EC83BED2D9DED5E893DF215
+:103EF000F17B02BDD3C6F1BAD1DF7A5D20AA40EDD5
+:103F0000DB29A593F781BD77B52AA23D484BB403C1
+:103F1000DFCAAA64ED45463FE38630FFE0FA19C6E2
+:103F2000E7D7F1F9A693854A0185D7F40C49F151F9
+:103F300010DD50D26286F3DC70B3403A74F1CDEB01
+:103F4000C2E6FB2304D07476E497855F413FFC16FC
+:103F5000223C4889766F771EF81106EFDE69A35878
+:103F60007EB1E466F09BBEC08D7153EE879AF978FE
+:103F7000B36D792FF0AD9918FD4FCD8F8C0667C2C8
+:103F8000FD529C676808EE665544BF54371FC24314
+:103F9000C3C797C58386BFAF8B0F398318EE75B53E
+:103FA00072AEB5761EDC435821DF9DCE7BF56AF6F6
+:103FB000FE88354F4038D61499F1FDAD3F996A0A15
+:103FC000C170AE1E7D59D377D9B46E80CF5C0EC759
+:103FD0003AD282762739FBC517C58578FB8776EB01
+:103FE0005C9590ABA85F52572CF863E9F9EB25E29A
+:103FF0004DC88738A8403ED0C7417DC63AFC5D9980
+:104000001A9AE77CFDA3C9877F76F93E95471F5032
+:10401000A41F8412F366D8EF5D68FEE3ADDD0C8E5D
+:10402000CDF305DF50A423BF597FFFBB3983C5679C
+:10403000DFBF7B34CAB992FB472430BFB600F379A7
+:104040009AB9BD7FDAEB4A8078CEE9EE610910AF0C
+:1040500039BDAF2C3E521ECF7EEE57FE76B115CB4A
+:1040600093E542879880EF9D4C413D5C1E4340EEB6
+:10407000848F5B91A1C5655AD8BD246179F875FC20
+:104080001CF5746842920E6FABAF3A268D1C880700
+:10409000F8FB4077AFF275E10B7E2CC0757F4C5F6B
+:1040A00065A4EF13FE88CB85EA5D6764881F4CED3D
+:1040B000CEC6EF4B4E2D37BE07F86006F7CF4793BD
+:1040C000D1B0AFEA5D13E32F07BCEC13DD3114BEB2
+:1040D000CDDDA7644F84FBB97078C2FC10473E6405
+:1040E00076D7013C0FDD1783EFFFBFC6EF8BF2F8E9
+:1040F0007721E1D341103FDBC0E17A2683C5D1AF00
+:10410000AD2E31A7D075F3BA945190573688F73F4A
+:1041100093E1C2E783F938ADDFA0F9ACDF4159691B
+:104120008A74FE21598C7EEA89FB5B45C27F1EDEC4
+:104130004AEEB7FBE1BDB8D3E5027F6F269CAE091E
+:10414000F2C7E92AC107FA17FC58AC570BA8FF5F62
+:10415000D3F2EEA6327DA9D17D389CF767980C7911
+:104160000EA738DCDFE6F4A1C159836FF87EB5FEF7
+:10417000545E8DD7C75BAEDE36EA17609F34750B91
+:104180008A894ED524F5C9C087CDDB1E30C3FDC258
+:104190000DFCF759885433527FBF7B2683FDCECB6D
+:1041A000EEFCB1683F7EBA9AD9C7EA9C53F160072A
+:1041B000BD6672BF3116F8F175D1F05DF3F0F2BD56
+:1041C000C54A63B9593F6F36EEF3DAF92566080F31
+:1041D000DD34BFC79CA6A3A73319EC7B415AFBA0D3
+:1041E000F92ECC5FA4EBE13EBCDFB710C8C7C8EB2B
+:1041F000EC2D8DA3CF6F6A496474D8D0D923639D09
+:104200007D67585B4F5B279C9FA655C719EAB3CBC8
+:10421000FA32002ED516FF2277043A7D2853BB8749
+:10422000FA927A42A5743BF2FF073D71AA32D27727
+:1042300050676732FAD5E987B448FA61E112571A34
+:10424000C07FE18E6169C01C0B5FAA488DA41FDE90
+:104250005ACCEE0F0FF0BCCB93D3A87EB854A71F57
+:10426000A6C5207D848FBB2AF302F58386AF7FB37A
+:104270009C790BF44304BEF6641AF5C3F4EE5AD4E9
+:104280000FD3A789C4A58BC75D9F793EFD50927A55
+:1042900003D6CDEEB80874F316F74B00AE50C23A11
+:1042A000A027EECF64723F5C5F4493E7395902BFA9
+:1042B000DF3E8F3CFF5F82B326CF175EC7DEE31F72
+:1042C000488704E5F5C21B04FCFD92853B983C5FE2
+:1042D00078338F4B86C9D71A90AF057AF9CAC6379B
+:1042E00079983E68DE96FDC399F4F98D1D66B79501
+:1042F000F6BF31246F0BF5F2F6FE4C49837396122C
+:1043000001BF3366C61197515EE5809C3A34EAC519
+:10431000BC6780EE5F63EF99FD89EBF15747BD58AD
+:1043200000F1F4C37CDE67B9FC3AB1983496533897
+:1043300094CD61F6F0822D22C2A1A98BD9794D9B33
+:10434000047C9FB732FF0CDE1BCEDBC1EE0DE17BA0
+:10435000BE253A3CCE7BADAF7D303C5F27E0BD67EC
+:104360009D7B1E7BEF6F0D8B135BE97F902FB1223E
+:10437000367E3DC13C1D15E3CD0B38DCAA2D81BD39
+:1043800030BEFA67827B1DCA35637C7A41CEA46356
+:10439000E01FCCDB14D6EE5E81F7190B20EEACF3F8
+:1043A00047DEE2E7BB4DF4E73D0379816F88117F7B
+:1043B000EFECAD7038347C4D38ECA77028F8EA701B
+:1043C00068EE7E00F36FBEEEF90F64F2787B3E2953
+:1043D000007EF9934945FEF7BE2CE27BC5731E189B
+:1043E0009EA6CF53FA1387C36B264F7B3AF46B62BA
+:1043F000EF1FD7AF7D7A0FBC1A3EB3938C82B07D8E
+:10440000FD1AA39EECD7CB5D2ED4BB335B9E16E08A
+:104410007BFEB789047F076C76BEC503F7AFFB63ED
+:104420000228CF343A4CC892D877DCB8BD776850B0
+:10443000A01CFD8A6D82827C02DFD3803AC5037C9A
+:104440004F63F7E57FA9E470C7F84CF33686A7669B
+:104450008A17E0B34A6AEF821EB989EA1DBC2FEBC6
+:10446000EE3143FF06DA2F19E58E1BFD5D4D3FC18E
+:10447000FD5D49AA0E6F3B0E32FADD28B84904BC37
+:10448000E5D2FFCE85B768F8D2EC870BC59B068FC7
+:10449000842C23FEF6C7F4568FC67B2AF63B40A435
+:1044A0003B11EF553EEC188678CCE472369CBEC1C9
+:1044B000DE77E9E24BD7C0C6F1C3F531982787EB29
+:1044C0000E65F6905EBE84FBD1CDA417ED9AB47450
+:1044D000CF5319BABCB0E93C7FA5FF5E37D4AF3EDD
+:1044E000734CF47EC4598AF73F5A7E2DFC7214E651
+:1044F00083F1FAEECCC20333E9793F5D2EE2FBC9CA
+:10450000D79B5C6F17031FAF3413A0CB4F5F35AB46
+:10451000CC0E8D43395CFBDA213384466A21BF809F
+:10452000F6ABBD87C9DB4330196DFB3DD5632A7CF3
+:10453000B784748E81BCFD69EE9E0AC8DBBEAE6096
+:10454000FF52B8A7BBB64C79FB6D80EF0A91007C97
+:104550003F585E86FECA1DB70B48D7EF2CC6DFC298
+:1045600022D74DCB7EFB6DBAEECDCB53F09E6DA620
+:10457000BAA702E86DF6D5761BDCD34DCE15894778
+:1045800007C79B49EF5290DF335B6EBF0EF6DB40EF
+:10459000F502C45D1BBAF757A4417DAD80BFA3D619
+:1045A000ECF5C8F00A54EF9A5332C43FEA683F4032
+:1045B0004FF35AD6AF798380EFF7D451F900E7ABC8
+:1045C000DB20107891A497DA7F5636AF0F3ECCD41B
+:1045D000BB968EA7F57A180FF36E48C4DFBB6B7ECF
+:1045E00095BD1F5457B4642FC8A73A3A8E3E26BDD6
+:1045F0001B6EC7F9E6AE1508A4063714657FBF0821
+:10460000E67BD58CDF0539D0F3A80CFBBE85AE97D1
+:104610004EE79F2DF655609EF5F70405F3A0ABBF5E
+:104620008B783BC9F980647C87F199C0EBDC2ED490
+:10463000F4E3C6ACA12CCFFAAE25ED70AE3E6F4AC6
+:1046400036B844CDDB4EC960E77DB8183E3C43F137
+:10465000C6F3E0767B0FC97D3A39B52B6B188E9F78
+:10466000B3AD04F9FC365283F7E29E254C2F1F5C54
+:104670001AE313C01E312BA837772FFDC62370FE17
+:10468000134F99F1BEF444661FC6678FAC35E377CC
+:10469000435AD78A28478E6C617121F1F1EB2AD3F6
+:1046A000017E540E00DDED5E5B26833C3CE2137020
+:1046B0007CD9E377A6B2B8AF517ED4B91A515E3C2B
+:1046C0001EC3E443FD9AC8F7AB51E5C5A24A26DFF5
+:1046D000C3E4C1828C768CFB85CB89666263F65D10
+:1046E0003EC9877AAF3F1DE9B7E9553301FBAE49B3
+:1046F000526E5903743333066E92295FF8F7807C4B
+:10470000FBD427B8BCF4F94DB7FE660CC0EF30C03F
+:104710001BF8627532DEAFD6F96A11AE5A3E62FD01
+:104720001A233D6B794F3778C4D07B3EF47F373501
+:10473000C41155D7EFC03D942EE97AB76E137CF0C3
+:10474000FDA303F71CDC7B6701D615A0C3A6BBB88D
+:104750005E5D6D47BA3DF09D534B812E6FB95BC0D6
+:10476000FD13AFA71DF44AD31AC10571CDFABBD909
+:10477000F87A3A1EE8E5C0A38C7E281DBB80CE9B4C
+:10478000D63EB017FB6F105C30FF8175B5A8871B54
+:10479000BC22C1E71B0EA2BD4CF501E60DEDF68A69
+:1047A000A940E74D6D1605F0AAD18B467F07F9F7B2
+:1047B000A789D53DF25AF87D8A2C5744BA1367640D
+:1047C000237D356F3123BD347B193D1D7C4A443A2E
+:1047D000DCBDF4FA4AA09F131B8528F447E9AB20FF
+:1047E000445FE2E3661C5FBF99C51776AF65747DD1
+:1047F000A48BD9A7658F0F47BFA6FE353361F1079C
+:1048000062D3DB1FE7A3C370BA1BA097381D46A372
+:104810003B8FB9733AE41FD4FE82EEDF15825759FD
+:10482000FB77300E50D67E039E57E31F78AF05F21C
+:1048300036E6742C61F98C12CBEFF9D2FB0ADBC798
+:104840008321FD980FFA11F24FFC741F2F6E79022D
+:10485000ED804F9E3C88F98DF39EA3F8A7FD4F6C29
+:10486000B1133FDAD93E94338D5D22E69712C95FCA
+:1048700078ADEEFD2D2D2F63DE2FED08F7C6AD16BA
+:104880005F351DDFF8ECA191784F7E2FB353BD4FFC
+:10489000B2EFCC106FDFC86B213F5362F921E1FA10
+:1048A000D73684C5718EFF260EBFC7246CEAC17B44
+:1048B000A6C6CEEBCD165DDC521C6266BF03F19B33
+:1048C00038F69E19C53FDC2FC2FEF4BF27A1E5854F
+:1048D0001CDFCCF8A7719B19EDA3C64DEB30DED7DA
+:1048E000BCE914E6CF96FDF2A9788043F336D1985F
+:1048F0003FB549F45B30CF4B3C6861DFE530E431D4
+:104900003575B1F73B9A3A799E5058FECCBC5FEEB4
+:1049100078D64B4133EF999FC5033F7DD4BB311E01
+:10492000E049E7C3FCA3AB8BA2E4279D2F2FA9731B
+:1049300005CF4BBA0A7FA7233C2FE923F807D5E31D
+:10494000F94338DEB5BCAE4D4C6E51EC17467A0FCC
+:1049500049B35FE63DF5F98F218FF6F8D68F7F0CCE
+:10496000FB9FFF8F4F7F0C791D64678C02F644F329
+:10497000936F61FEA136AE7A08B3A74E6CFE19E6BE
+:104980006F9E78D78276E1891D47B2C05E38F1F418
+:104990009954C8CB5CB4A302E3138B7E5586EF8792
+:1049A00046F337813E7D17903F1A8E8FDD5DA2DF83
+:1049B00046F7F9C93B16E4FFFE3CB3CE052C7FCF8A
+:1049C000C5F3CBB644CED3D5F2A19ABAAEBD7A1C0C
+:1049D000C8BB2EA6D7FBF3A3CE9757F63B8AD74B7F
+:1049E0002F007F5B78FE60E75511F3CA3E817F5050
+:1049F0003C350E31E6957DDE75DB4F1E83675D919C
+:104A0000DFD3D6F8FA7C70D3F2802F1BA2DE3904F4
+:104A1000F868EBCF318F0FF056ED02FDFF7916C429
+:104A2000378F9A0318370CECB02890EFD5B8E30015
+:104A3000F2CB895FEDC73C5BC2F3714F90FE3F96AE
+:104A400037C96317CD1BEC2C1F8DC31FF2D55CF14A
+:104A5000D8CEF3D2181D6BF96AD1F2D47E3E84D938
+:104A6000415A7EF20257AFACD842F802FC084580AA
+:104A7000AF8386FC3FEDDCE1F3290087CBF4F997A7
+:104A8000D1F201B99D3E005F4C2E9F58C7F331FB18
+:104A9000F32CA949970FF9414C1F36FB840391F081
+:104AA000ABE55FFE340CBFDAF9A2F185C69FE7DF04
+:104AB000F75783CB9A212CFF5F83CFF1B391E57435
+:104AC0000FE777EAB7F887E8FC965BB9DFA2E59DC8
+:104AD00069FB6DEF647AF9F826663786F3775394AD
+:104AE000DFD37A6308F3EF9AB6F58C0439747CD778
+:104AF0006F38DD31BA6EDA7250F672B9EDD3CBEDA4
+:104B000028BF5FF62EDF37F57723CED7BCE554C438
+:104B1000F93E92D4EB61FF1FF5323BE4A34E31E244
+:104B2000EF20ECE67AA9FFDC7619FD2E313E16E582
+:104B3000D1227BD13BF05DB7457619F31D5A97F032
+:104B4000FC887BDCF83B1EADF649F8FB0F4B013EC1
+:104B50003A3FD4AC78F07727CCCE9A02F0AFC2DFE0
+:104B6000EB941D26E2D3E35FF2E2FBBD5386FE45E4
+:104B700002BDD3BBD8F8DE48AFA4EC49A6F3F59646
+:104B80000B6EB07707D29971FE6B54D1103F8358EA
+:104B9000359CEBB49B7D0FCD6EF22BB40BB1C7F4FB
+:104BA0003AD1D173B1DFABFE1F05EC5EF50080009A
+:104BB000000000001F8B080000000000000BB57D06
+:104BC0000B7C54C5B9F89C3D67379B6437D990047A
+:104BD000121EE1ECE64D4258C2534539092426F233
+:104BE00070414554D4253CC23389F8B8D4D2B24080
+:104BF0008C88B40D824A7BD12E34A87F4B5B40BC9D
+:104C0000050DFE170816ADB551D16AFFDA06880802
+:104C10001A6005CBCDF542B9F37D33933DE764438C
+:104C2000D0DB7FFCB5C39C7366E69BEF3DDF7C3336
+:104C30009B48E89F8790752BED598A959004E295E3
+:104C4000884C88D3AB04DAF208FE5DA1FF4B24B494
+:104C50006EE775371647B34613E2608FE87BD701DE
+:104C60008B44485C1EC9534612E222715E99D637C6
+:104C700026686F4A0984AC77FA27D3CEC915F81B8A
+:104C8000DFBD245EA51DC6B3D3FFAE507812C7D2D8
+:104C9000BA3D327E9266AC27135D1DE1D108E90B67
+:104CA000CFE99F4A48B94C21A3702495598231120B
+:104CB000BE9F9CDD37026F522AF186E0FD148737D4
+:104CC00040BF7738187C025E0ACF718047A5FF216C
+:104CD0003C856D010B41B88EEBE1A07F92CF89F04E
+:104CE0001D37C1775C0FDF30D59972B2805614A2A0
+:104CF0005CA1F875D85B09C7F3793D9E0909106579
+:104D000034E053E095BEA7FDB8A54DCA1509F0EAF9
+:104D10009248268E676A37D075329ED769BF7BE18D
+:104D20001FD711D27F89DA62A3F3F4D92517A0A186
+:104D30001F85B51590A0B4DA0019CF3A443D64231D
+:104D400085F4BB3DEFD9DA68B974E77BF8DE02750C
+:104D50005A26C7AB13070C27E4FEE0305F5A3E7CAF
+:104D6000373BCDE2C57AAB924A48C3347F9A653867
+:104D7000803FACB16520212F92BA21127D6FAF2FF9
+:104D8000683D7223F015FDEB0FEF0B5AB54278CF5B
+:104D9000EB8484089DC78B715D75CD9E46EB9EAEFE
+:104DA0007A00EA4D80FCEB61BC82D67ADAFEB0EA8A
+:104DB000BB5B1D45C8B4E72C444A21647CA723286B
+:104DC000011FB4F521241D9AD5C5015DBAF119C59D
+:104DD0002F498D7CD7233FF2EF289C153BE9FCA798
+:104DE000F967FB268E20648CC4F04A5C6D23A63BD9
+:104DF000018EAA256A6AA4DDB4E7CECB1E0ADF12B3
+:104E0000CA53D03EB1C2754B1E852F710BC5960A91
+:104E1000DFFB1F00B8B357F82DC01EE349DB831238
+:104E2000A527F93405E111E334EC97917F1B1EB3FC
+:104E3000045723FFAA926FA89E7E6D26FA8519FD5E
+:104E4000F61E43FAD5341F63F4DBBBF500D0BFA6D2
+:104E50005972C5A8301FEF2ECA44E4F1E0049F3216
+:104E600088D23526DC0074B59212DFE47CC4EB6393
+:104E7000309F6E78E5F0F586D7174F6D7BB2887E50
+:104E80001AE8B078B349045FE2BB1DAA0DBF2BF24C
+:104E9000F89F023CD46E6A6B88A570BD76EAFD046B
+:104EA0003F8537BBE37CA888C29B3D0EC5B86BDC51
+:104EB000173BB61DB0D17FBE087C4C5FE410FF6A83
+:104EC00097E36AF860FCDD858F3DC7103F16A8D3D5
+:104ED000E7BB6D6401D0B574AFA40581BF63C8FDA5
+:104EE0003E5A6E5729A351B8F6A9322F2546C70E50
+:104EF0008FA2D2F6A5B75BB4202D137919997F3D07
+:104F0000FF5E61FCC5F121E829F88890C6F8699434
+:104F10008E79B9FEDD46BE792ADE43DF8F6F3FFE14
+:104F200020B144DA6D5F497C73AD91EF28FFFCCC72
+:104F3000D0AEECE1387F61E47BE04BE013337D6879
+:104F4000BB109397A7E2611EFBDACFCB80EF6BA576
+:104F5000ABF979EB4ABF6FA2B567F9F195C83EC0CE
+:104F6000ABF9F9518E5FAA1902ED79A0B5259248E7
+:104F700051DD2FDD7F14E05B6A6F4BB89DD2B7A681
+:104F8000E4820DF0B03AFEEC0DFE28FDF40447EB90
+:104F9000A55C878FCEEF60670CE2BB5B3BA0271D53
+:104FA000E7DD95337D1329833E119750C4952DDAA3
+:104FB000B3895CEF4ECC5A349929AD2EBB275D895D
+:104FC000216810146A47CAE00985AF62EC2E05EC2F
+:104FD0006719D1D94B37F6BB8D0C037A580D766D16
+:104FE00052D62DA7C1BEB42A6D6B1229EA5BD32419
+:104FF000B43F375F6A6C01DB75739AD560E72A5559
+:10500000637D126176528C334DA374E7EF2FE0FF7E
+:1050100007717E53558A5ADAFFD4ACB860804EF9D6
+:10502000D6B177F926EAECC57B97E5FB7D85DDF106
+:1050300033D92DF0E343BCFE3E96E26718CC73767D
+:105040003D43D3D5F161C6A3192F133F9D3F99145A
+:1050500075C7CBB5CEBF0BAF84FC04E6374993C907
+:105060003A7704AF66FCD0BF29F0DD7B25F43B091D
+:10507000FC820EC542EB95D74944F805657D7574F1
+:10508000E7F099F16AC69FF03726F176EF00BE2867
+:105090003F4D92B738801F2A7FD43A3199EAB1CA7E
+:1050A000418CBE2444914BF17213419C015EB721A7
+:1050B000DFB9ACE86750BBCEF8E3D3F2D3121D7F63
+:1050C00072277D47E12C57A5201511C0CB71135EC7
+:1050D0008E9BF8E2B87EDE66787F0FFFB82E0ABF9F
+:1050E000288D7920F713DCD43F01FF2183A857A82E
+:1050F0003D1AFDC9C844A61FA2DBC9F19DBEAE7E04
+:10510000183E1A916F24E2EF7AEEA2FD84346B0A06
+:105110004503996077A19C4C20DA9A763BA04246E1
+:1051200038055C97D37CB7BB69FB1252B9A65D8F7B
+:10513000E74F853D67F89EC0F13781040EC80950DE
+:105140002ADFE8E72DFABB57CC6730190CFED08771
+:10515000AACAF432EF4FCC2F399984240A6058B28E
+:1051600007B749003F09D8FA44C6B372FA9ECE9AEF
+:105170005EED46BD5E47005FE0B6003D4BF9FB5279
+:10518000BB2304F010BBB5A38B2EE0C390592EF0C7
+:10519000FB285EC895F8087C0FBB25E5645E04BE5D
+:1051A0003347EC0199F2F5C474FF0F000F1DD23B99
+:1051B00045802FEA97E5803E37BFBFF0714B0DBCAD
+:1051C000A7DFCDC7EFF8BC1683D34DF926BC3F2629
+:1051D000B8CD1D4D9FAF62FAD74E3D519D9C96C6EE
+:1051E00031399F447C0AF8970763999CB5C42E44D3
+:1051F00079282775F543697F7F8CBBF908C8592545
+:1052000009E077652E231FF6C6A7B790F07DE0F77B
+:105210004ECAB39AFCE800D2E7606C6E16D8B3832E
+:10522000B14C2F0BFFE165B7EF5937BECF08825E57
+:105230003EAE8D7A17EC4455C9888F46D2D262F7BC
+:10524000D9809EF380BF285EC7027FD1B607A1EB4D
+:1052500074E4AF20B49FB3D6C45FF664ECDF47D5E7
+:1052600018C055AA59BFD5FBD55D78E376B2377F14
+:1052700091B428248FE2752EE7D383B13101F0E396
+:105280004A9FA0724CF13787F89F6F94000EABC114
+:105290007F9F1B6B457F6FEECF6351DE69E32D75FA
+:1052A00074C8F9F4F93ADA0FC95307EAED3A69D448
+:1052B000B507FADB55E4C7B92EF6AC9DF691DE07CB
+:1052C000FAA5DA8DE2936CB69ED7F3A579FC1EFBA6
+:1052D00035B53B28919960570F5AD5815E9DFD7871
+:1052E000D36DC1F99FB7676FB1787AC6D37C7BB2B3
+:1052F000A68C88D44FC6C6CE8CE62788FE045EBB3B
+:10530000D617E49BC6967191F5C563ABBF6E3D326F
+:1053100048BFBEF8BA55737CFFF5C5A9AD5FE3FA87
+:10532000E2690BF50F016F8A2F7F9ACE2FFADACD43
+:10533000FC976096F635C8E1D3DC8FA41C943F6DD2
+:1053400068F7EFFA2E9F404E50168BB193406C31A8
+:10535000D5030A09588BE17BFF2A0BA5B73293A02E
+:105360005DA27A08FD4F331E4E6795FE03F856C8BE
+:1053700067691CE57F2A8F4F58D4A646F0B3DF96A5
+:10538000A9CF4A475F3E07FDBFDB962FC4F2DCF191
+:105390004B39A0174A39BE150FB3EBB5F14CAE6AC5
+:1053A000E3991CFD31CDAF78E8F3564D768EA4FD20
+:1053B0002DDE2B7B63102DE10CE0B7DBA6C8A9F036
+:1053C000FC84DD8AEBC7834E46FF1344AA00FC949D
+:1053D000BE17E3DB43CB47D34A723D3A3FF1D1B42A
+:1053E00089582715D4E1A37CB9CCCEE4E10471330C
+:1053F000B8D74ADEEDF4D1F9B5EE44E0CF8356627A
+:10540000F047D23D0AC29BEE6178ACEAA4C2398271
+:10541000F15D1D1DBF4A516DE0FF5775DAF039C0CF
+:10542000817C196BECC7E361FEB8C7C3F8A9AA5326
+:10543000C220C1C158733F0A7BCEF9DB4C87A7DC81
+:105440001372603E8FA669B91EF45F5505F0533A9A
+:10545000B2E563D087BDEBFF8004FABFF692141A61
+:105460004CE7DFB1C78AEBBA0EBE2E38B3E750DF88
+:105470002A5A2EDDF54102AC1FC7727A9D515A138C
+:1054800000BE25AF527FBA10D9B9EF3DD87ECEE825
+:10549000756C18BBDE2E5E7F3973A00FBFA3008E24
+:1054A0008EF86513EC8120C07770953C13E846EDCB
+:1054B000A6F0CB24D093657B642DB6A8BBBF36D5B0
+:1054C00063E5FE3AA3E3432E364E4FF25DDA194F01
+:1054D000823AF92E555405E02FED4CC0E7674E6D2A
+:1054E000DB3895F27D20CD8AEB436A855AD05F94F4
+:1054F000085FF0D13A9D4F0B9FCFE13DB7DD7E03B2
+:10550000FDE79B607FE83713DBFC294CD8E9EA6EA6
+:1055100074C4FF2A7319FD44B31F29EC5945F3865F
+:10552000FA0104F01EBCED06E0C3530A013EECE6AE
+:1055300067DB6FEEC19FDC807CF4DA9E5FE13AAA04
+:10554000C8A362BD76CF8572E0E31A129A01FDD638
+:10555000EC915D21FAF561B2A700EC8AB0FB022F55
+:10556000A14B87EC5EB00BB1B26B35CCD37E8743D9
+:10557000A578BAE15C610ADA3FBBB502F462696CF6
+:10558000B6638E8E9F0FA6C815C0078753328DCF86
+:10559000ED1B0BC0FEEDB3307DD472F26E471B7E67
+:1055A000775B0AFA71C2EE9BFC561127ABCC96834F
+:1055B000D1FC61226FD9144BDF4FCAB51219FCF729
+:1055C000B645E80F74B3FB97FCB83E30DB7F8177BC
+:1055D0008A6994976E7E6B04CF06FFF5690F8F97EB
+:1055E000A96428F8A3A14B1B17039CE79AE35DABC2
+:1055F000311EC1FC9D73ED8B364E81E7EFC8185FFD
+:1056000039774946793AF8C6E2C16D3A39A61604A7
+:10561000E97471F8D7675FA7F4B9F8799C3780FC13
+:10562000B7B320DA7A59ACA3E8C8FD2D69087F7FAB
+:10563000CB5814375CB7DE1459B7FEDA83EBD6705B
+:10564000399893B42DC76CC01767A80B0FF00628C4
+:10565000F1B753BCDEA4B5C92E1D3CFF97CB7791A3
+:1056600047DB057A25404A0750A7852C88D34A6E28
+:10567000007F741A716DA3F3D97FAA54B2D2FAB81D
+:10568000ED6EAF44EBBBC12105BE7D550E6EA77814
+:10569000D84DF5F16EDAEFC2D6469B9B8E1BD843F0
+:1056A000811A43EB9490808753D64046928E4F16D2
+:1056B00065B2714F59FDBF847E4E7D1243607D7887
+:1056C000EAF3B8A876B83893E9CDD7B99D7364AA40
+:1056D000D83ED4F1DA9BFD295CA14ED770C0FBA265
+:1056E00097BE9667D3716EE4FEDAE44DADF510D740
+:1056F00099BA25AC80FEF1055D656082A7BFE4B56F
+:10570000825DBA7D87CF0AEEF98C3D7556783F737E
+:105710006FE361A8DF1DDA89755BA6FF23C0EB4D3F
+:105720006BC387805DB21A89027241BE617E589850
+:10573000CB9DA7D37B3011B9BAC4027CDE35FE8A7B
+:1057400056055CA2A9F56C7CDA5F1BF657179E0024
+:10575000F62D6339EB2F831C5895A846FA1D7FA9B7
+:1057600055D2C71B4A7FB804F9E8F947970C4E0693
+:10577000BCFF358664BBB96CA4C0F38141587F126D
+:10578000A52D7FBADE3F23A118C637C4CE4AC14F2C
+:105790009A9DF1912B0EFC85479EA98B03FD90E20B
+:1057A000536D7E1D9D4A374E1EF216F0696C0CC675
+:1057B000ED2E0E677EFDC50D8E6080C5BB8700DFB8
+:1057C0000A7B5505F436C4A384BC33BEA75D04012F
+:1057D0000E511269B58BE8EB24940670757A187D2A
+:1057E0009B6CEA2C18AF292EC605E355D9B36DA0E2
+:1057F0009FBAE29F1044A47AE206EE6FEE3F753046
+:1058000019E87A71F8AA0C5817842CFF8EFAA83779
+:10581000BE5AE2D1923211CE4006ACABC4F7FB4E79
+:10582000C615823D7C5DF861DED98361BEA25D5103
+:1058300026F30BA83CE0FC851CA4B4126D6B21A2DE
+:105840004ADBADC3477E268BE38972B7550D3039ED
+:10585000A27E08C8953364CF0479DD9789F5141FBB
+:105860007178E9FBDABDD95E594539CFCF4C8DC887
+:10587000FF8D5CFE535AC32877D7BA3E706532BE9F
+:105880000D293BB9FC10D443203F4C4F870630FE16
+:10589000080C00BA805EE0F449976859CDE92CE61F
+:1058A0009DC2E57E2A976BC003BCAFE4F314EF6F93
+:1058B000E6F82A930B13DBA2C47DBAF86E793A019D
+:1058C0007FB16CF9002C2B39BC0BED1B309EBA302C
+:1058D0006503C65153B4462C174E6CC4E7695B662A
+:1058E000237F2CDC2C19E2A2A27C81FB5F674E593E
+:1058F000D07E114B5C7FE03FF1FED7E067B0B8F09F
+:105900001D80E7D37B363E53A446E2C2A79B983D59
+:105910005C1067F4EFEEE6F3DAFFCDC164E0978B3D
+:10592000B18D53EF0639D92EBB56011D9BCA2435C4
+:105930000AFFE9F10C78AD6DFA4739CCA386B4358E
+:10594000809E3ECDFD32B559427DAAEEA5653F2A27
+:105950002C4D4CBF9EB232FD7E4A4A96403E40BF1F
+:10596000839E3DF5F9BA8C47818F2427FA37A037FB
+:1059700077E9F863F18EAD0DFDE93F6FBAE41A0ED9
+:105980007C15528843AF9F059F087D6B867B05A7DA
+:10599000ABE0C31B22766805E00DE2A740B29A0D8A
+:1059A000E7317EBA81D3AF09F80DE479ADE0B7E114
+:1059B00016D4A726391EF32FD2DFFB9EFA4506C662
+:1059C00025C652B9A5727D1AE43A0A5FFC9CD36FD2
+:1059D00089C7BF29338ABE3F2DF97F999C1969BFBA
+:1059E000EFE42D43AA74FD3CC8F171D1EA1FEC8AA3
+:1059F00082AF085E497FA0F3024A19C003D922B9D9
+:105A0000C0EF13EF53B6B07D8097B91C89E7A22E83
+:105A1000F03D1EF09D89F87E3993D97D1B98E4B442
+:105A200020B3FBC4724B7FB0E30BE3B45B300EB327
+:105A3000C14220AE44A452E4F794A6A74F5E1E09CB
+:105A400065AC07F755A85F0DFBA50B9F50711DB8FE
+:105A5000FA8558E4B350A607E7B5BAC98AFC76DAE6
+:105A6000DA98817CF9F9A2C1B02F13F884D9A19EEC
+:105A7000F029F8E727DC5E0BBEF3AC677CD7A4689F
+:105A800071C077C28E0AFE3CBDFDE6629037D13E02
+:105A9000C237AEE1826F66D3E79EB56D32D087D252
+:105AA000ED8F8087CCF561D45F3DD14DECB709FA1D
+:105AB00009BD9E906531E0FB330E7F0AF75FBAD3D4
+:105AC0007195811E3746F8FF5333FF5BD5883CFD47
+:105AD000A11739B83ECBC5E20C9FCD4903FD22F694
+:105AE0006BC43EAA18FF2CE7879EF65B0EABFE3315
+:105AF00099BAF9C07EA08A7A9DEDAF94717F7BD967
+:105B0000F698600CA5DF3E7805FAA23D2E087EA22D
+:105B10006897AB104D2926E4BF33DD385E2EA80A06
+:105B20005A4F596E235974DC8BD71D6849A0DF4F3B
+:105B300009B74D1E46A7B6CFD676FBAD10F725DACE
+:105B400022F02730560F7CDEC1FA25AE9D0638AD17
+:105B50005916C33EA898774F76AB277A5C9FC5F756
+:105B6000C7F87BB39C1FE3F83AC4CBDEE53490085A
+:105B7000727A1309AC82FD117289B8C01E77C9E927
+:105B80002582F6657096514E453D8A9C0ECED2CB4D
+:105B900069671B93532E8F894D562D9A7F32348B14
+:105BA000AD7B139BCA4AC09E24FA08C63FE8345115
+:105BB000AE1752B906790D807CF6037C32FEF2688E
+:105BC0008DF7C17B4F13F3AB2F26B1F92EBC513BA0
+:105BD00020839C53BF5EA29F3672B9EE19EFA14499
+:105BE00089D9A744D027378D6B9B00F656857D81D8
+:105BF0007E303F46DFF1E3483044E9AE5E224C4F51
+:105C00007CFE8BFB1E05FDB0C1E1CD5623F627ECD3
+:105C1000F197001E7A9267CA971AC4A396FD9783DC
+:105C2000AD037BD81F1FBF5C46FEA37C7E4B960E48
+:105C3000FFE37D6119F09A1CEF4FB32611724FD329
+:105C4000D0E9F641747E6EEADFD2FA4C5A5F0F71EA
+:105C5000B73E6D84D79F72A47FFF38DD3D5985EF35
+:105C6000D753B80399DA5D59A9B86F7D0FC073D3C4
+:105C700080B00CFEE7B5EEEFD7427C8ECEE7F81D84
+:105C8000435E984D9F56DDE56B80B7228E3C86C7FC
+:105C9000916B9B87637C59174F5E94759578726FF3
+:105CA000E32670B9A7FC8DEBB884B16119F4A2D0DA
+:105CB0002BCBB3FA707E6E23B0AE10F2057A09FCDE
+:105CC0005A916700714527EE5704F17BA8271647C4
+:105CD000F4CDFA464B4534FE7E3CCB11558F92E60F
+:105CE000FFFE8F4747D3F9C22BA6571FCFD2E9D566
+:105CF000A6C6E37D999F4AAD3CF51B1EE46BF98D6A
+:105D0000ABBD7FCE02BE7B57C678CA7531B6800464
+:105D1000EB7E8DA8AEBEBC3F10BB6629E42CA2F57D
+:105D20006F25A2419CF25B19CB8D3FF655B8216ED1
+:105D3000F2B1C5BB9A60BE02E267EC6012B4D37FD9
+:105D4000EEE5F1CF92130E0DF200CE4976D49FE727
+:105D50008EC505C07E9E735A306EDEB23F06E5E208
+:105D600042561C8F67040D710FB19F73E19D39C9B5
+:105D7000A0F79FE1FB9BCFC4B2B8EA3377E5603C64
+:105D800052C46D1585E2BE0F84A9285EFB807F3C5E
+:105D900000E3A9228EDBD73E5B6249456C1CC5CE71
+:105DA000E6D757F14B101FDFDA4B3EC4EB59361ED6
+:105DB00007F0EF01FEAD5DD1668375ABF07B855DCD
+:105DC0001EDCE139007911832B58986C6B87C50272
+:105DD000F3DC4AD929C9DD9DBF041F6DED9E7770A4
+:105DE000204B17A79DF618CB3BE8AAF376BFE479C2
+:105DF00007E3DB8FBF02FE1C95F75D867665A97110
+:105E0000FE287A6BC6F21F62FB9EF87F8685F8A398
+:105E1000D99113427F2B7503C04E91BF3F12AF46FD
+:105E200089CBCCF8AC2A15F0628EA745C6FF318E1F
+:105E3000FF59168F1F65900CD85FEB6D3FD30CF7A1
+:105E40004756FFA068764AD0D93C5EF7F66C1DD65F
+:105E5000F59D8DF8773958BFC5BA7E53B299BF33D7
+:105E60004362FBF5E432417B2DF884E2FD3F812F54
+:105E700046FFE9C48838DCE709CBA00F2E7C9C35AF
+:105E800010F7DB7B58770A7808F16747CBEBA0E384
+:105E9000F9A2D121299BD1618695ED4748776563A9
+:105EA0001C60466C8C14A3F34F2E77D95BCDB02FBA
+:105EB0007B3076CC488C5F5AD581D1F067DEAFBDA0
+:105EC0009C45905F012FDE28FC24F695059E1B4A19
+:105ED000B41285C5C7C83630811AD3A3291504F773
+:105EE000D7C6481AE223339BF94D5B79BEDC857730
+:105EF00064D40BA34BD4206C91527BE1CE1E85F968
+:105F000057AF5874F957824F1A7E43EDB2217EC8BD
+:105F1000E44AAC9F93B83EA65EA3B64BF79DBA0287
+:105F20007440C41E0CACB71BEA190FB988A2B31792
+:105F3000495A9AA13ED0E78A8375D3C00AD5D04E7C
+:105F4000F09DC8FFC3BF1498B70BE34F7D383C6387
+:105F5000243FF20DE837880F97707AD2F98EC7F98F
+:105F600056B45DD0F38D986F6FF33ABE92C243156D
+:105F700058FB4A0A2FD50B73D6BB57A521DE5D040B
+:105F8000D6132757DAF1F93CDE3E69D3EC86743A32
+:105F90004452BD8A71D924ADEECD74C8B7ACA37597
+:105FA000FA37B7519260BD4EF50CB67B6EA50B4B20
+:105FB000416F177D2F817D2F2579B04FD3931DF32E
+:105FC000673B0CEBE1ABD8317FF6A8EE76CC62F7FD
+:105FD000BE05FBFF4B9B6515F862CDE43E1AF0D37E
+:105FE000C69D9217E26E879A591EDEC619CC9E880E
+:105FF00071CFBE9A8876E3ACC4E49CB424A11CD4CF
+:106000002671DAD427E17EEC39BEAE5E91E5AFCBE6
+:10601000D6E9CF8DCDA362715FD66497E89F4BA27E
+:10602000ED700F4E02FF69F85A2513F5C072809F7C
+:10603000CC6F1B119B097CEBFF609C047AE09B0CEE
+:10604000A0A7795F4FECFF897DC13FA6F95765EBAB
+:10605000F456F7FD3EE33E959C60C73CDEB132CB83
+:10606000E3D5D95F02745D037E22E5BB35C7E2103C
+:106070003F6B2E33F9A370FE04C669718E467E1203
+:106080007696C259F42EE90E67AD258CF1421D9C1F
+:10609000CF5C1D4E539E2B87AB0BFF7C7F4A762A2D
+:1060A00008FF3912E70538F7DABC1FFBC10E9F8DD8
+:1060B000C3F89EA04F0D97B173941E1285F3DCDEDA
+:1060C00011B11607F847FE17805EF2A07002F8E7DC
+:1060D000879A47E4C37C7ADAA73D9255FA7236CAAA
+:1060E00099FF37D06EBCABEDC26FD5C8FCAFB2BF65
+:1060F000BB0BDA7D07FCBCA6E7A3DEF053AB38D6BA
+:106100004A2C408E7E98C4F5B499EFA4E603FF05AF
+:10611000794754DE30EF339041826B28DE1A8632A5
+:10612000FE2373898A76D9C4272BB27C6F03FC4285
+:106130004EAF829F7701EEDA2C5F2B7C0F700C281C
+:1061400046BDF47E36B36FAFD82CD89EE5AF241190
+:10615000CCC731EF9F9FCEAAFA04DB0BFF2BCF2FCA
+:10616000B90ABF931C1CBF3A7F85902F96723C2DB5
+:10617000857D5DC857DB63ED30E44598F0F0789697
+:10618000AF83E181F2D948C6676BC855F11186EF3C
+:106190006BB3FC17002F4E2BE51740CAD8D9698086
+:1061A000E7C3AAF635ECFBEF5EC5F071EE4F0C1FAE
+:1061B000FBDA2DC8D74F93212897C596F3F741FFF7
+:1061C00054BF5C867EC685774AB06EEEB740B58018
+:1061D0005E1E10F6CA96ABF3AD9483EB27BF022583
+:1061E000A5C383408711EFB078CE55F8D60EDF7F78
+:1061F00007BC27E57C07FD43F92A15FA177C75AD26
+:10620000F956942FC8803EDDFBA3EB28DC5F38B045
+:106210002F06F555CD6E09F579CD1B5FE07ABDE609
+:10622000B51864CA89AFC5E2FBF37BD8FBB325D1AF
+:10623000F3013272FAA0DD59BAF3019FD14E07F093
+:10624000F9CFB4F3AE2C39B2BF9A3C859D435813B5
+:106250002BF24DD93E6B02E7B3E4413E0DEC507298
+:1062600019C17CC10407CB43EC7EDE80C96D2A6F67
+:10627000E772A912E0D97CFE408E63F985A964FD1E
+:10628000D780A7E40AE3FB544705EEBBA69ACE29C4
+:10629000087C97E570FFD946D2408FEC34E55588ED
+:1062A000F2FD1CEE07D627E17A50E170B5386DC8D3
+:1062B000B7CB9C769CF7B224923C19EB0ADA7F7339
+:1062C0003F5DFEA76621AAFE1C45451C5175FE5187
+:1062D000AAAF8FA1DE6F667FC3F7E97E8FE1FD80F5
+:1062E00005430CEF07D5151BEA83975F6FF8DE4D6A
+:1062F00011A0AF67AEBDC5F07D76E374433D77F383
+:10630000DD86EFF3835586F7052F2D32BC1FBA7358
+:1063100099A13E6CEFA386EFE51EFCF26773589CD3
+:106320004D167EB973A41FF84A76DAA518DDFA6F08
+:1063300019A7474942451AEC5BD63BCBD3607DDABF
+:106340009244EDF155E26EDF77DDD628E8CFFDAF60
+:10635000521E773B7B906A11CA7F3587281F0C43FA
+:10636000FFAB3187FB5FB355F83E6C437BA278717E
+:106370001E3312EC184F33F7BF2C478DBADE922D27
+:106380005ED764A9677C09BEEC0D5F9B395EFFB7E1
+:10639000F8FAC8943724D67BE6767FCEB1707FDCDE
+:1063A000BF3B47BFAE2361D987EBBA6FCE0608E883
+:1063B00051827E4D6DBC0BE312663F408CFFC734AB
+:1063C000DFEBD08F599FFA96CF67DF59E80243EE93
+:1063D00079BDF7E71CF37AAF6C26D223C966C0D328
+:1063E000FE2E3A6B86F55E7DD2685CEFD55BB5B468
+:1063F0006B59EFEDCF2188EFCD40D7541D3D6D5E39
+:10640000D5857ADEE8BF74F7CFA9FDA3F3DC087E5B
+:106410009D047E5932F3D7774B386F31EEF7F0CFCA
+:10642000DBF5F6A927FF3C8678D72A32D2EF4BB0AE
+:106430004FD41F7F3056FE5EFEF885EF620FDFB748
+:106440007A318FFDFD29325945F178A1624C3F1216
+:10645000451F8BF2288FDFECCE2548B7DEE21FEF19
+:10646000AF5C70D5F31CEF57B23CCDE9C047BA71B1
+:10647000D373195F8CC8E5FB92312C8E71E63F9C7B
+:1064800078EEE0CC2D1F261027E4B78D1819803C3C
+:1064900066E27D08F26F020E27C609A7578E1AB969
+:1064A000CAA9E3ABB10CCF137EFFA70488FF4CDF72
+:1064B00095991A70F4CC4F23F8FC88D2968379D939
+:1064C000AF9FEEABD272FABEEC5416A734E6AD998C
+:1064D000E346D397D718E47869A74482C9BABAD2F9
+:1064E0008AF9814B3B157C7E39C71857EA115FD773
+:1064F000884FF37381CFF72B4F67403CFD6C6C7472
+:10650000FFE37E8EEF2EFE319D83E9E97C4739EF74
+:10651000FF42C575FD40CF4DB7A9D9D712E7127814
+:106520006ABDF4453CE88937E07C4D94FEC7E7B28C
+:106530007DA537B4CFE1F80329B1872700DF97F0B5
+:10654000787A94BCFFDB7261BDD459F12FC9FB9FEF
+:1065500095CBE9C3F3EAF372D5A879FFBD9D5F9AA5
+:10656000668B6EEFC646F0F721C8EB83CF595D000E
+:106570005735F84E10BFDB6AC5F8DD07976208ECA7
+:10658000A77CB1C5FA2BC8575BF05CE6739B687DAE
+:1065900041650CEEFF546FB5B2FDB9CAD82084AA8C
+:1065A000166C7DB8EF1C3ADE57546E9764D3F7CF64
+:1065B0003D8DF9331FB4AFC3FCEDD320CFF4F98286
+:1065C000CB8FCF00FCEFB335160CA7E5921D92E1FF
+:1065D0001CC6A2A658435DE4030AFA1129723E4381
+:1065E000A5F6A421D7781E6B4464DFAC2197D96B44
+:1065F000CCB3AF99C2CE631D3AC9D6FB87B358BEA0
+:1066000060A8F2CEC9C3E93C2A53AD182F31E71771
+:1066100012824427F379FE6FE5270A9EBBAD1CEA80
+:10662000443FF0CD95754807DACE51A63B8F50F91F
+:10663000731677A974B3BCF91EF30E4DF986E27C8C
+:1066400050B73CC3C8F9A0E3D1F8E657B946B93E04
+:106650007492E515CE7F4766F3EA456F1EE5F3F8C1
+:10666000A07DC8BDBFA5F8F8A08269F10F2EDDFCA2
+:1066700018C4BDBEF04904F23CBFB814FD5CDA3F5B
+:10668000BAECABBFEBDC0ED0E7B68A855D7510CBFC
+:106690003B7C0F18CEF55CBBBEB9BA3EA9CE65E710
+:1066A00032CDFADDCCF7FFBFF4FBF4CAC3190127E2
+:1066B000962F40D9B18BE947B39C9BF5B980CB0CA1
+:1066C000EFD24ED990873C16F4C028BD3EB7E17B8F
+:1066D000EAEEE37C02A395E01A09FD80CF81EF4743
+:1066E0003A82C92574887AD7B6F8ABC56FE8FAF94B
+:1066F000347C5FE3F6774099FCC7FEA560EF47BCAA
+:10670000B313F308CFF5904FFEA1DB94BF2619F722
+:106710000BBECD2DF910D6FFEB54560AF91C498556
+:1067200090E73B7C9BCBF6E57E0AFB96356F5D449C
+:10673000F97CDAE64F83F840A0BFCDBB3D4A7E88A6
+:1067400092F7DDCE25EC80F83CD03D2FCFB0DF07AF
+:106750007122CC5B381E8771A2E7D3B4B83CFADD56
+:106760002B695A7C1EE8F334CD91A7B34FF57C9E7C
+:106770008A25BA5F5C9627F8DF87767C5E29D5BFCD
+:1067800051F8D09BC7F2F94B9EB92B03E2719F1FC2
+:10679000BB3B03F463CBD363AE9AD7F633904FAAD7
+:1067A0003F9F04BD9F1DD94FFD09971B11EF9E67A9
+:1067B000F3E5E8F3B192F392D87EED75BB5B3D94BF
+:1067C0004FDAD7CBA8BFDB1D2C8FED8443A9682AF5
+:1067D00064ED520CEDD8F90519F89ECAB1E250BE2D
+:1067E000D5EBA332E0E9D49EE759C6E964235E3BCA
+:1067F000B4B71DBFC50E76549634178BFF337EB8E1
+:106800008E8E00FCF038D76397D3FCE301EF366E31
+:106810006FAFE3F6567198ECEBC0ABEF8FEF4DD353
+:1068200026423F77A7696540D7BDB64001C8CDDE97
+:10683000B8E8796993F2983F129BC7F98538D07F01
+:10684000C5F164DCA79F9AC7F6E97D50DE3420BC11
+:1068500006F2C93F74BBBAF6B97D789EDE7707BCF5
+:1068600027696DE456C893A3C0C23987D74F1D2747
+:10687000A0BF12C2ED04F269124CF9AEA2FC2A8F3D
+:10688000F91FAFF17DCFEE72C7F8CCCFE16CA2F269
+:1068900002E74185BCC0FE3AE44BAC53FD5CEE58C8
+:1068A000BE47D3537D24D867F168AA05F803F24C9C
+:1068B000413F99F3839AF3981E053994AE22870FCE
+:1068C0007F47396C7A6AB22516E07C94605E075582
+:1068D0007EABEDB4FEFC329717CE8765AE27B80EBF
+:1068E0001AB43C6E1BAC93025C9E066F22AB63E94C
+:1068F000D76E9EC727F2A2DDF56D0A9E177894E544
+:10690000E99DFEFC16D909FD7F2DFA37E6058A3C84
+:10691000BE468E5F318F251EFF93C01FE6BCEA9EE8
+:10692000F3BFBECC873C87E784BCF33C9C713C0F33
+:10693000675CD3D3188F1BD774B322D14F9E5742B5
+:1069400012ACF79EAFD314B037BFCB637939BDE536
+:10695000C1BDCCF9B191D3B9A77CCA17F87751F270
+:10696000295FC84BD5E593FD80E5533E9EA7E2F72E
+:10697000CFF33C9AE7EB58BC6ED14BEF49FABC39E8
+:10698000F19DC8BB1BF810CBBB7B5E698B05FEB9C4
+:1069900018CBE875F10771C15518946F1B1EFD1CCB
+:1069A00082398F9CE58F0F0E874B301F8810BC07F4
+:1069B0006148BE6AA0CBD6B02B0EE4A5377BF0268B
+:1069C000A7E7B5F2E18BF90C9F51ECE63B80AFEF06
+:1069D00060375BF398DDFC20EFFBD84D6E2F85FD13
+:1069E00014EF8F717A56E751BBA9F36B7576F358A4
+:1069F0005E14BB99428298A7413A2C5E7D5EA8281E
+:106A0000FDBCDFB73DDA17D07E1C8FA724741C278E
+:106A1000924E0F4DE7722DEE9778B10FB97F5A94D1
+:106A2000794CE1FD596685F13E8A8466296A1EDA51
+:106A3000876EA64FA85EFC4F94B3C1546F4ADDF534
+:106A400066147AFC13BE1FF08E760898E4FAA4A6AA
+:106A500078709FAE420F4B7E2AD04393A114F82F3B
+:106A6000BE625C470AFCC7E533F9ED9BADC5E6D3D2
+:106A7000F22F5CCE7AA24B7A3EF36386F052E4A901
+:106A8000EF36F9A313F2195E6ECE37C61575F44BC7
+:106A9000CF8F423FA187DFF6F806023CAF9DDA1D9B
+:106AA0000F7C24E824F48F995E11395B25F6C9B375
+:106AB000F3A3D81FD1DE6C8722ED0308F756E0A3BD
+:106AC000912CDF07CF11F0F308023EC1E71A9FE7D0
+:106AD0005F3DDA7080D70CA7ABC3225D0DCEA470EA
+:106AE0008A04F29FA4B9B07CFD944502B85C6105AC
+:106AF000F3DD5DDC3E9AED2055171CAFAC9F17B956
+:106B0000DE6838C3F2101B4AFC6910FFCFC9D626D5
+:106B1000025CD5795A1994D7656BE5507EE8667E9C
+:106B20004B7ABE560175912F6086D397DF957770AB
+:106B30002BE033612209803D84FB64609F2581E75F
+:106B4000312468AE52B063095B08E60924C7870F99
+:106B5000C4C0FEDFD3C40BE79F7202AA05D65F99BB
+:106B60000F69ABA16C38C3EFC52921787EB22B8F9A
+:106B7000AEDE837974206F7A7EADE278AECA677A32
+:106B80008EFA21F7E733B866E7EBFC1021473DF9B1
+:106B9000153A395C80EDAE5D0E6BF3BF9B1C3EC8B1
+:106BA000E5F0A16B91C31F46E4F051F8BE37395CA4
+:106BB000C7E5EFC55EE4F0FFF07E7F97DFA31E5DC3
+:106BC000174D0E459EB0E0779043B0F741DE1FD5DC
+:106BD0009F3FCB4FFD5E72B9399A5C9AE5B1ABBF6E
+:106BE0006BE4FF9EFCBF0143FC7CDED1FDBF1D3C7E
+:106BF0005F5CC833959797B9BCFC9ACBCB0E80F7F6
+:106C000043B78AE398E5ABCBDE84999E80FC3C7D5C
+:106C10009ED6E108BE5E857ECC7939E34CF1FCCF8F
+:106C2000F2193FBCC3CB84F071027A81E2ED8D7C16
+:106C30009DDD7891CB4B602CCB3BA5925A0A7EE52B
+:106C4000BE0EEA470238F90CDE719B5B0F81DF480C
+:106C500094C678B8E7AA273C7986A8625F202A9E66
+:106C6000E8F87F86F1CD746B06BA39BAFBF3667A21
+:106C70003573B90D737C7C5F3804FE008E61088724
+:106C80006A59A7B3F39F733D41E16D0778C74F0C75
+:106C9000CB04E10AC5C3FE89D0A764206D3FB27B57
+:106CA000FB8E48FB0EA0D7788DB62F8CB44F825048
+:106CB0007E26E831AACFD04FD6F0BC62839BF18309
+:106CC00099EF9B6CEC7C4417BD1AFB23BDE6AAFE32
+:106CD0006FA1FF26859D1B695AEB92D8794096EFEC
+:106CE0007B225343BE8DA287C890EFA68794214C88
+:106CF0000F59875C831E720CE9D243F1F07D38F79F
+:106D0000EA7A6800FF7EE090ABEBA10CFE9D67483D
+:106D10008FFEC0009897590FAD53191EA2C8E960A5
+:106D200080EFDB5C4D8592CAA97B486AC4AED17600
+:106D300099509FCBDBAF6F64F9160112E78DB6CE89
+:106D4000F00E715C6BFE9997C3F99DF2A837FEB8FF
+:106D5000CD06F816794E625C73FEB4A0634DF3AABB
+:106D6000116428E4695DCA00BFF2DCB16F313E7284
+:106D700024AB4A83F15BF68F31E46589F197F178B2
+:106D80005A995CB813E2B3E78FD830EE2913F5D9DE
+:106D900071149EDA235612443DC5EE1B10FB61D6DA
+:106DA000230DAD108FB712DDBD50B89E5113816F0A
+:106DB000AD47D8FD4C2485BD0F10FB2A76BFA371CB
+:106DC0009F3F4933EEF32757F431EDFB1BF7F9FBF7
+:106DD000CD34EEF3A7FB8DFBFC0316149BF6FD8D63
+:106DE000FBFC8397979AF6FD8DFBFC996BA79BF6AE
+:106DF000FD8DFBFCB99B8DFBFCF941E33E7FF55B10
+:106E0000AFD8605D5DF0D232D3FEBF71BF9F22A4C8
+:106E1000354B775FCCB0BDAB0DDFCF6D63F7900D19
+:106E20000FAD33B66B64F71504E87F80CF2F88DF92
+:106E3000067CA690F09B0320BF25287943F4B385F8
+:106E40007B778D86B298C7C5AB371BEF395818349E
+:106E5000D6BF7ABBE208E481D58210D17E6A5F9208
+:106E6000824177CF745FFC92B1BD88F32EE6F3398F
+:106E7000CF9D82F35B643CB76CE693EAB76E63F731
+:106E80008605B456B8F741E041F08B8BF38B804B0D
+:106E9000E063B1BC04E55CE041DC9F55639A7FB7D9
+:106EA000F9EEDD8AEDCCF336CF63FB90AEFBB0702C
+:106EB0003F8074931307CB13A2F3827D72399067DE
+:106EC0009213231E7AC2DFB5CA8DCAF1109366945D
+:106ED0009B5835CECC77486F333EE3F38CF264C6D3
+:106EE000A7D3DB3F2A7F89FB4F713EB01FB25722E9
+:106EF000BF90BAE37541F386860151F8897A7E988E
+:106F0000E761C6EF7B26FC1E56FD47413F5DF8F862
+:106F10001B19E9EA6F1B01F6EC2AF9671FF3EFAFC3
+:106F200075BFFD187C2FDA9BF7DBCF419EA4EEBC2A
+:106F30008AD44537CD942779E8BF601F89B6F1DB45
+:106F4000200E5BE1B5B3FBC0CCF96BFE736047026A
+:106F5000A51AC138E079E25D43FB5BE3FC8F825EFA
+:106F6000E2221786A0BFEBC7FB85C687DB2EFC1687
+:106F7000BA575A5D304EB47B484DE70F2FC3B8DF88
+:106F8000F79E47E1B7D3759252C0FC6E5B817E9D40
+:106F9000D475BF2A5BEFF4D48FC823EBA9940ECA33
+:106FA0006857C3529C37DA3D65E905467BAF3BE73E
+:106FB000995EA0B3A3350F5F7813F41EC5F7407830
+:106FC000EE7452FF46BA26FF4685EF9F8D4F40BEB6
+:106FD0000EBF250773DD707F959AD8A7B0FB7D4B58
+:106FE00022AFB00EEE534A86E7F98957CBBF28355A
+:106FF000DD7365BE97A8A198C155CCE7E9E7F75DB9
+:1070000095F3BA389726E271B53359BCF969531C28
+:10701000B3BCC0C9DA679596039D1ADC12FA4F0D0E
+:107020009264D84FBA38A4A41CE6ABF1FECB21364B
+:107030009F8AE7EB10AE14D33ADE52C0BEB7149469
+:1070400062092B7AA0B74D96A3E2735201835FF8D1
+:1070500051DFE39E99A33123BBDF3363BE1FB13CF5
+:10706000AFAE05D48379DFF7D5DEEE99395A1E75B8
+:10707000FF17F01BDF27C2F7730B8CF72086E2FCAB
+:107080001BA7403CE24FB217CE9B98E7FD4001F3AF
+:10709000FBD7F3750BEC2BC17AA40F2FBB7FCFF07E
+:1070A00014CCF23D807855285E29BC211BBB0F34DF
+:1070B000FC21C171FA2FD00E407D944FC5F3150D00
+:1070C0006EE280FB82C2C32D181749F1BB26C2BDF8
+:1070D000BE295BA43E804EA117AC0A093829BF34F3
+:1070E00016B891CEEBC99A0370BF49E296AF8907F3
+:1070F000D713AE892ED0477349D438E7937C3ED35B
+:107100009EF328B02E4BB447BFCFE1493E0FAA1FD4
+:10711000D6C13CC6DB8F8D903C11FD024B5BFCBFA2
+:10712000768BE15CB3284F644E68047E1DB580F415
+:1071300010F7647C7A83EA7B06FA1F7554C5FD8AD2
+:107140006AA1A7E75A08DC3B7A17679FBBB6B0FC79
+:107150007572E9CA1559F8DD04FB27B07F50BDC42C
+:107160001984FD84EA6637DEC7471648B8CF51DB7D
+:10717000FC9E0FEAD52347BA50BFC54B12DCCB08A3
+:10718000269FE933859C14FC22F349D1FE6772FBEC
+:1071900020D6F7D41EAC8FA778AFDEB2F5009C8F57
+:1071A000F87FD4F003DD3E96FD1FFF90F67B073598
+:1071B00052CB8BA154C82C8CABA7613FB7F37E0296
+:1071C000DF12E9A43D32EE1DCD6FE17C3EB6928028
+:1071D0009D3293B5940D6D7D3411F75B457ECE0CD9
+:1071E0007B6319D8B973B670119C9F3AB7FF2F8390
+:1071F000601FFEB31F5D70C2BEFCDF95B0139E9F83
+:107200005AF18113EEC5FB6C05BB3FEA3E6E3F04AD
+:10721000BEFFC4F5825AE86B01BADCBFF2F268FD2A
+:107220003D3864792AEAFD854119533A845C2D7E04
+:10723000291E3C9BAEFAD29DC986BAB0074B634863
+:107240005DB438A1A590F1D1C21D5B6D035418DF68
+:10725000FF118C7F0A1289295D4EED71A2DF28E0B3
+:10726000A9DA31DC067EC6DF9B634808D62F4AAB1D
+:10727000959DBFD4264B941FFC9CEE6638DF7C2383
+:107280001EFB9BF734D33FB3E958CB295EFDCDEC11
+:107290007E4BF33CE67DA696F7A3F89EF704B5E88F
+:1072A0002AFB7E05A59B7FF9E3984F6D9EE7EC8056
+:1072B000F93E4B0DF55F35A7EF9CB5C6F7D5CD4F21
+:1072C000623F7389BA1EF206E7359ADF577E017E68
+:1072D0004CB5293FBB53E8A7D1640CE8A783F6CC93
+:1072E000C468E73045D9B1D285CCF9E54A3B96A7C9
+:1072F00056122C5B0A18DF2E697EEF11E09F9ABDB3
+:10730000BBF0FEA143C15129D7D34F263557E27EAA
+:10731000E124BE8F7C6FF7FB34E30A69FB890ED34F
+:10732000F9673EEF599C0EE23CF42C986F113C57E4
+:10733000BED1CFE7FC914C07FA43853CFF660C9D1C
+:10734000977CEDF312F311F313EF97CA94DFA2B415
+:10735000177CDE52C0E216739BA635F4A7A858B37B
+:10736000FF0B5C2F13D37D7A13EC4FB6F27C33C343
+:107370007D79F4EF28C8AFE0B76AE2C5FB43CD7C66
+:1073800025E84C1CD600BFEF18FDF82E7E6AFE09DA
+:10739000E245D01B6EC6D3DFC744F9CAE037533E7F
+:1073A00032D4E7351AEB67AD6D1920EFD5A6DF476C
+:1073B000386BCA2F11A5A7D083F23757D5CAE11C65
+:1073C000CD3CE26B6079B8EC1CDE29A5F1CD1F82C3
+:1073D0001C363139F83BA7FFB6425F6521DA2FAD85
+:1073E00008EF415C9D2EC345BFB3D74B2E90AF39FC
+:1073F000F5C3F13E9D62A2617FF7F6E0872D296417
+:1074000074A8AAB3121B359E55740CD073557B64B7
+:1074100071CF95634A5FB8B785D163E913BB6CE957
+:10742000B45C5057CDFC8320931B718FB4E03FA117
+:10743000FF17AD3F80EB70BAFE30C8572D9C8B28EC
+:107440000239363DAFBB19E9506BF213AA057F7ABA
+:107450008917F8D3FF88D30EE7AA7A9B37E91E5F16
+:10746000C1F8CBF923D9E83F9E57D57EF09D3F81E7
+:10747000DD5B2F29FE31F09CE20BED5478553CDEAC
+:10748000E37BAC53262ADE37E21F03E7DFDBFE3A5D
+:1074900008F76305BF8AF9D6DAD723BFD612E3BA55
+:1074A00072365DC040DC74F6F664CCDBA2FD17EDED
+:1074B000057F63BB15FD8900599606F74CF81E63DE
+:1074C000F7D056ED4DC2756D553DDB6FA9DA91844D
+:1074D000E766E9BA12EFF716F438563FC1968EF414
+:1074E00072E33D5964AF91CF059DBAAF0B4D745A0D
+:1074F0007BE0CD34B5FB3A5147A7F61EE864B89F50
+:10750000714B21D78F9C4E6405D73F0F1CCE867DD3
+:10751000A6F375B15E39CA7AA3EBFEDEB9D7637EF6
+:107520009988C755F417BF27E0ED0B74BDB07E14E2
+:10753000D2CD4CAF8A7FCE41BA90BF3A09C469EF31
+:10754000CD24F74FA7CFEF9798BCDCBBA6B202ECD7
+:10755000F9AB85CCBFFA33D55B5A2E5D0753BDA579
+:1075600051BDF501D56750FF70651AD6FFB252C5FF
+:10757000F293957958B673BF5FC81165041BF8592B
+:10758000AF73F979BD50AC971E4A03D7A2E29F1F93
+:107590008CB240E83370DF8CB24184DCAA19EDE193
+:1075A000CCDB8DF6AECDEA2A87F3BC8127D87D6887
+:1075B00055BE1B0CDF1345B5C13DB8246F44E439FB
+:1075C000CA9B6A83F3E8774D4E367C3F63ED0043F8
+:1075D000FD834295F995159986E777CF2A30D467D0
+:1075E000F3FB5C893A16E5E6219E374AC8584617F0
+:1075F0009E8FF24DDD987EFF46E1FDE61D2BBE37E6
+:10760000D343D075EE6699F8697F733653FD4541D3
+:107610006C6FA474A2EDBEFAD809674748C38E11F7
+:10762000EF8EA5F5633B58FEEAB1FAE49F82FF7442
+:107630006C476A02C451FD0D32F7335C78CF99E88C
+:107640007742FD2ACC53991D8CC17308B35B02CFDE
+:107650008B3AFCC400BA78203747E5604842FAB15B
+:1076600038C0CB3118C73F45FD3A571FB83F8CD4BF
+:10767000430907A712E9FB7FB4A60641AE2BFE29FA
+:107680006B69C04F2FC7F27D1A09FBFBF2BDEC6D91
+:10769000EB90BFD49D2194DF185C2FCC6963F3235A
+:1076A00052F100A0FFA924A2255120962EFBCBDF8A
+:1076B000144AA78539AD45704FCC2C7728F54EDAA2
+:1076C000AEA3C9CAEEA5A7FDBA687DE9AF63B6321D
+:1076D0007DA2F5837B2222F80C16C1BCF3FBFB6272
+:1076E0008652FA7D393F58847A6D452ACA9519EF3A
+:1076F000ED363FE23700722045F46444CED8FE1BDD
+:10770000556EE9A06FE658BD7DC15EB5AFB7B27BDF
+:10771000E1142D611A9E33DD8D7CDCAEA8E530EFDF
+:10772000F6B56EBC4F478C5BB55ED6D87DB8942F4E
+:10773000E1FB0DB21FEEBF11762BB056F2C33D39FF
+:1077400066BE79F0813198F76EF67F457996CAAAC0
+:107750005FE7472CDA2FE3EF5890916DCAED86FB77
+:107760001DD9EF7D10FF58433EEA12CF1FFEE6B051
+:10777000A05F9308EB8ED34765E4B3D39EC6D1696F
+:1077800099905E7270F4BFD1FA57530227E15CED15
+:107790008383FD2301AF8B2DEB3360FD74AEF9C401
+:1077A0004FE1FED82F7F63F5C2B08B5E5E3818E3E1
+:1077B000F4DCFFEEAEB7C4FDA45A3ADC17B458DDD2
+:1077C00089765CDD211136FF20C229ECBA6B9384E7
+:1077D000F7049D18E55C07EBE539A6735D27F8BD56
+:1077E00015E543993E11F6FE315E9F63617C4DDEE7
+:1077F00090D8BD52FCF71E843D10FA5AE8FD19439B
+:107800003D2C9EC1F535213B516FCD87DB94E83C83
+:1078100097BC14C3E2CB2A5DE08FC67B4BF16FE3CC
+:1078200050A62F16D97EF30CC852356945F8BFB45F
+:1078300006E7B7BAA1FDD6FA3ED8DEEAC5782BB77F
+:107840002F70AD3DE8A56A2E7F4B1B25BC1F8970AC
+:107850003B398FF74F5EB246EC86278A7D31D9954A
+:1078600079DCAECE23A6786DA3D1DEF9E2D9E2773A
+:10787000111D17EC67042EEA3F53DCCDF707DF9CA0
+:107880008A704BDE601438AA493804F7442DDDC1F4
+:10789000E2D766B8CCF3B85638E77BA74D4C1AA9A7
+:1078A0001BD704B7C037067C757410789F1F60F82B
+:1078B0009CDFCCF6033EE7FE1AFDC338B399FED534
+:1078C000C43715F2F3AA3751FDE98EF083E08385C2
+:1078D000BB82B85FF115694C70503958B279D78CBA
+:1078E000EB54583FBF87EB90597D42D99624BA2E6E
+:1078F00008BCFD4CC5A0DEE3F5FF2A3C117E6F36C7
+:10790000B6A37899D7C4EEC5D67DC7F3D00388AFA8
+:107910000581800DE2990B787CB037386B1576EED7
+:10792000BD7778191EFFD57087861AFDD8887F9499
+:107930001D75BDD5E517F5628F3FB58606813D0EF5
+:107940000F52D01E7DA378FF529202F6391BD70D3D
+:107950003DE9DBF9DC2ECF033B4DCB939B5FC17B35
+:107960008F3EDFF40AEE8FDA7E332F01FCE5939B26
+:10797000E7FC14CE059CDC3107ED72F52F845DF633
+:10798000DBF4F67EC2E6D9BFFC11F0E94BB118D7A3
+:107990009FDFE2E7FE38D57FA0173733FD4736314A
+:1079A000FD580DF6AB10ED572E7CF7C87C7F2EF0FE
+:1079B000BBEE39DAB547E6F8C7607BE20AF1FB7B3C
+:1079C0004360BF847D1576F7DD74FFD9A16017E4AD
+:1079D000773EFC019DFF99DD32C67496CA5B33E0A9
+:1079E000F7507AD2E3DF1FDF962E7CBBAF01DF5565
+:1079F000806FF48718BE8FAF65783EB19EE1BD61A0
+:107A0000476602AC838FAFCD443FE8F88E6CC4F775
+:107A1000DC7514DFE807AB463F682DC537F8FF80FB
+:107A20006F3A6E558BCAF1ED65F85ECBEDD07A56A4
+:107A3000CEED86D7C07DA0571EF9558C17EFA18ECD
+:107A40000DA5C23AE5D42E9940DE42979FC4FD1998
+:107A500081E77F90C6E7C1AFEAE6DF6C882110DFDF
+:107A60005CF8AA13CF0D7D2995F403027434FE212E
+:107A700001C68B8CDFE5D7788A46E9FC9A6BA44F68
+:107A80000DF1615E7F4DF31F3E06BF1EAE1D827578
+:107A90007F8DB82F62AFF1BE0849059D86E747ED9F
+:107AA00076E08381E6FB34FCF8FB3017B3BFBE6F92
+:107AB00019CA733847BFBF521B17B2423C2ABC4B8E
+:107AC000427A2F7DA824A184C0BE541DC231BE8835
+:107AD000AD2B244DC338630CE59B38B8AF0C2ED1C9
+:107AE00085E7AA8BC51DB7D0719D1178CDCFA78230
+:107AF0002202FBEE881EB7AD2B627EC052D982EB0C
+:107B0000902536B61E11F921B7F2F7B716B175C92F
+:107B10001D452CFFE21C2413D17ECF6D88E7F9CEE2
+:107B20001331FE29EE0B5004DE5CCA59C3EF27F077
+:107B3000F8C2DFA00D85736E0C8FFFC24FB6D0F672
+:107B4000F7F0F6F734FE09F7E5E84AE639B0BFF793
+:107B50002E8FF1E2FD8C701F1CE5BBC7E3D83E0AF7
+:107B600049495440AEEEE67AF69EC6277D608FEE18
+:107B70006D8CD7A0A4E304088FB78E847DD8FE3621
+:107B80008CB7CEB2B7FD06DCEBFBD34E3C6CA753F3
+:107B90005B6561FECBAA3E04F36B8651371EE2B7EC
+:107BA000F4D59E2BC957E31F633C7909C475AF27F1
+:107BB0008CB1C6225E0D758A5FAC3714DD70E7A606
+:107BC0007184BC4FD4A140EF25801BE087D9891870
+:107BD0001FB815E2CB7DA05490CFA62B246061E5A1
+:107BE0005A07DE87C1E2CD53F9BCEF184B428974C6
+:107BF000BEA1B78821DE7D67C812CAA574B8550931
+:107C00001D00BEB6D8552BAC0F7C155231AC9B97DE
+:107C1000ACBE36787F5E547EE7A681B46E61FBFF12
+:107C2000E11F48787FC93D54C8813FEF53488B5CC2
+:107C3000CCE807FC57DB87DDC71D7E80F1B788B332
+:107C40000B3A0DA7DDEBF17B0F878FF6B33601DA28
+:107C5000DBA2C797B673B9107EE7622EAF8B05BF64
+:107C6000ED30CAE961212FE0E752BCDDC3CB9EF8BD
+:107C7000FD20E7F7839CDF77168975F8B58DB7345B
+:107C80008684F4BFD724C6BD9597A122E63F0B3862
+:107C9000043F131E9FB250CD017CD4DEB806FDA672
+:107CA00005A67831D1C7B1E468F52EFD63B902A508
+:107CB0002D3C17E0916E8AF5025FDF63DB99CDEE14
+:107CC0005F317E27F6716791562BBF8F8CC5B9B88F
+:107CD000BD2A931D784E7F96C4EE5F3A57E20C584A
+:107CE000A8BFF829BFFFE47C1D3BFF3AEB07EC7C03
+:107CF000E7BD898F4C05FF7056824D81F253FE3BE4
+:107D00004FF79356A7DB1DF14F1A4A647E1FE8BF59
+:107D1000DD09FB196B40AFB0FAB3DA388C2AF1FAFF
+:107D20008ABFC0FBDB2F513EC0FA8FEED4E8B8E724
+:107D30000EF3F7015A87FD92C7043FAFC6FECE3D52
+:107D40002DDE37B0FA13E2FD93ACFE13D13FAF6FD7
+:107D500030BD5F657AFF7356BF50F4E49D70CE71FD
+:107D600016DFC79975BD847AA518F88DD277D6EA43
+:107D700010E27996E5202B4B4908CE5DF4F6DDE064
+:107D800061BEE2A254B8D7A2DD09F63B77B886F50A
+:107D90008143FDFF04BBB6689A14B081BE3C1ACC87
+:107DA000E1FA3D6ABE7631E7DF415ED69FC037ED2E
+:107DB000276658EA77EF6707C035CAD08FEBFBF428
+:107DC000B3BC3B3CE9DFA79FCF4CFD08FFE8E16275
+:107DD0006D24F44726DE6088FB2DFEB13711FC2BA5
+:107DE000F22EFB7DA5C5AB77668CA0FD2FFEEDBE08
+:107DF0008CF9BAF5784DA74C34AA8F6A3B252CBF75
+:107E00003AF0890DEE1FA8D973C0565E08BF0B73F8
+:107E1000C0364107D71291874ADA94E93AFB7EDDF2
+:107E2000300BD71BECF76516FFF634EE772EB6EC69
+:107E30003CF90B88035DCFE272E6F9B979BBBFC1AB
+:107E4000FE7314FF7DFC30A68FE68FD46E1A06FBFE
+:107E50007B80335A4E58137D1F7F2DEF6F561CD3F6
+:107E60007373463BEDD066D451FF1A381F367F8BB3
+:107E7000BB18E2BCE38796560CBB6ABC34CCE2A5C7
+:107E8000CD2C5E3AAB4FEB4354899335BF7BF95908
+:107E9000FB8D844C7A9674DDF30B71483C2E8D7209
+:107EA00077E0CE890331FE85F5F9C35E7F3640DB8E
+:107EB0001FE1F7FEDF3B66681CE8873677BCC545E7
+:107EC000E5B9BC70F61A80E3DE313796C3F3921839
+:107ED00067CE6C167747BE282FF4DD07F386EF21B7
+:107EE000DEE1B7B1F897FF6D19E35FFEA2787FB4CA
+:107EF000FDED591C0F6B8631FFE58885C2591C8149
+:107F0000438C4F1D96875A697FEDABD387C339BC2D
+:107F10006D8525AB112F7CFC6D85FE5AA88BF1E990
+:107F2000748BE0F9B5C2B184C3B11ADAD27E7CE3B6
+:107F300028BFE9D68DD327C61BEAB74F4E269A3EF7
+:107F40000E7BFB00437DE6AC4CC3F777CF2D30BCF6
+:107F50009F12D33AB2EE3BF8C1B54E671CF8639F4F
+:107F600035FFE3A37BC0BF6B92F1776A16EEDFFEAD
+:107F700011FC6ED3793AE1640C86AA180FFBF20863
+:107F8000FB1D4EEAD729FA7D9D33A4F519D807D5F4
+:107F9000ED1744DD4F15FB058B5D2D98C7F7BFDD51
+:107FA000D7D9368CAF878B21B519ECD2871887AB20
+:107FB00071B0799DD9770C7FD702F20AAE503EBFDF
+:107FC000191AC2BD7A9DABF0F7C226F0DF139E00EE
+:107FD00097B0C3BA60E0030A9C6BAFA525D897722F
+:107FE000AAA712299FB41E2043F7405EAFDB897910
+:107FF000174B3B6FC338F791B840E103F4BBC56B37
+:108000002BB15ED3198FFDFE596E2DC7FCEDDF4BF2
+:10801000B89F3065C0BDAB017EF8FE413ADE94DF0B
+:10802000DD5C0178AAD9C3F233A6C8EF8F847E96AF
+:10803000345662FB29323922517F21B1F31EEC778D
+:108040000AD87A5A97473BD781FD956DA19C7F0747
+:10805000BD6273A25EA9ED8CC5769326303BFD36DA
+:10806000D71BD636065759E7347C2FE8DF3ACC6366
+:1080700038776F4D6D52E03E4F6B9B84DFDFD259F6
+:1080800080A598E7DB79BFC2DFA1B2A67E530EF9C7
+:10809000996FA7482E743F4C7AF742DD98441245F9
+:1080A0002F758DD3C9F29D633A59FE73EB70ED24A1
+:1080B000C8D7D4156D0AECEF1087DD05F89A3A762B
+:1080C000B83A5F274FF2C1BB6C4017EBA6F76C6064
+:1080D0009763683941F77EA9C8EF37E9E58E6116E5
+:1080E000EE3FAEC2F90A3B438EEC457EBC4F9C8FFF
+:1080F000E5F2F209FFBE0B4FC0EB40C75763703D7E
+:10810000757AB8FF0AC0DB5AC27EAF8628AD19B0B7
+:10811000AFF2AF829FD2D92EA1BFDFC67EFF77AC70
+:108120006A81FD02C52BEC0B935B318FFF017C0252
+:1081300054430080000000001F8B08000000000076
+:10814000000BC57D0B7854D5B5F03E73CEBC92992B
+:10815000C9E43D210F4E208420012643124208C964
+:10816000242408486080AA840699208F8804424409
+:108170001BAFF6CF842410042D8AB7372AD2019181
+:10818000A2D53620B6698B382168E3B5D7467BDBAC
+:10819000E2ADB5F151048B3580D72FB62A77ADB556
+:1081A000CFC9CC9924886DEFFDA37C27EBEC7DF63D
+:1081B00063ADB5D76BAFBDC37ABB184B60EC163B54
+:1081C000E33F8DF18C253176719A8E31F8F5572287
+:1081D0006BECCC866749499F3B8EB1EE7BA64F176F
+:1081E00065C6AEE04F0954711AA81EB30F7CCE725B
+:1081F00019DB7C3252BE4F60AC3216DE013CF0829D
+:10820000D17F309DDE33210E9FC68302946FB60D61
+:10821000647A2C8CCD79D11C6053A1DD17CD1283EB
+:108220007E3A72BDF1CE787C3FB15CB031E63E6102
+:108230009418D41B3BCD9DE0CC83364719AF3A9EB2
+:10824000F027633E3EBEF2593A96CFD81D26FED99E
+:10825000DC25822F2A8A316FFB7CC660AC3583CB4C
+:10826000189BCED8EAC14882BD7BF8FBCBF5897359
+:10827000198CFBF2BD306898C7EA7B8529C7615E1F
+:108280004CB63A27001E2A93576E6330CE4A5147A8
+:10829000F3AD9C1CED6F81AA1B07A3E9FB4A91F586
+:1082A0000A318CD50DA653FB9B0663E9FDE64133ED
+:1082B0003D570F4EA6F7C64191B9015E33283037BE
+:1082C000C037CCB1FA7430BE492E6F05E2A3B2E5D7
+:1082D000FA79D88F775B52AE17F0B1E8DE7EC90429
+:1082E000E3621683FD49E86F51418E639D2538EFA7
+:1082F00096EE2A1822B41BE731B8E1FD1A78CE09B0
+:10830000295F0BA8EDB42026EC731360DC8B5AD3E5
+:1083100075F7B160F90227CC07F1CD9AE9B948ADFC
+:108320003F0AFE6728F5575B021374D09EBEDEEC51
+:10833000DC06E3BA1427CF45BC34ECE4F86BD07B01
+:10834000E65861DC0D8F084EA00CBB35DF6A623049
+:10835000CFFC33F5066F76B0FFAAC1A94C063C2CC2
+:108360001BCCA067C914EF72C443CDE04D0A9DA693
+:10837000D293C9053A1CCF56A4AB8C032AE074569D
+:10838000C6F749FD8CC46F41FF9FFC524FE5796EE3
+:10839000DF2D381EBDDFE83C00E33967F68A48DF91
+:1083A00073A9CCBE1786784ECF7C76A0D7AD1D22A0
+:1083B000F341FB6BE0E985E7B968E68E76213E6123
+:1083C0009E59BCED2BF0EFBFA53D696C3CD0B7E1E9
+:1083D000776F4BE318BB2DB36F6A00DAAD2E0DC477
+:1083E000DF0CED5E38A477FAA0DF8DDD6FE4EBA043
+:1083F000FCC37477221381AE63BC0DC8CF1B96FA01
+:108400007FA807F8F6FB9FB3CD9483F8EC94021392
+:1084100024F8BE13F0E8837175EE16E7F9895E2C37
+:1084200072C994205FAB7C1CCEDF1B06C7137E2E67
+:10843000D71BA71C47FE057EC5F7750A9FDF8E7CFC
+:108440000F4F7DFF7C852F39DFABFC5C274165F842
+:10845000AECE12E5F7C17C2A7F04FC0728DF747CCE
+:1084600089A714F92E4B704E80C746659D548A0724
+:108470001F2844FEFF38CED902EF7FD2E400640506
+:10848000F9BF627009D58B1AFC26F5A7F2BF51E13E
+:10849000773DF27F08DFC3778CC177F7E5789F449B
+:1084A0003C95FDE06FCFFD17BC5A2005321F8BC3F2
+:1084B000A795F827B80E4CF627D3691DC8EB42F8EC
+:1084C000483C556590015FFA87DFA1756084E79CA1
+:1084D00090F24DC8D7D988997E69A935F8FE6927E9
+:1084E000977FD7CAFF1D0AFFCF33B2551E6C4FEAE4
+:1084F0004B0B6DEF7C4ED90B388F534E81B7F74F36
+:108500001A37E0C984F885F1BB915E8B0A64DD7D82
+:10851000E9D88FBA7E399F7CD5F87FE4BC3679FFE5
+:108520001B45DE87CB7706EDA17CFFF885497E945D
+:10853000FF6F33D00700FB4E44CA4F2AF29FF4432B
+:108540004494FF6AF27F5DEEADBF413C8D20FF7F1A
+:10855000FB8FC87F95AFD4F5A2AE0F753D84AF1FDA
+:10856000753DDCB0CB19F52DA41320E6495C3F9294
+:10857000EF199C479D1C9983EB525D479B8E0BB472
+:10858000CE86E90565DD04D789564F8CB64EEA9450
+:1085900075B1565917EA7AE8113BF716C277753963
+:1085A0005E634EC8BAD8782C5C2F8CCA570CF96A17
+:1085B0006D5C3D43BEAA8367285F1947590F969C9F
+:1085C000AFA70FFE7A8DFC3436C740EDFD2FF2D3F6
+:1085D000D89C91ED0919DFFFB3EC89CBF5BFCB95A2
+:1085E000613C977341CEA607F9ED865719B717C6B8
+:1085F0005B9DC83FBD117C9EBD86547F0BD6BBC220
+:10860000EA118FAAFE5F8B748F0DF269B5CB5B8E7A
+:108610007456E9DF1BE1CBDE927DED7436C6F519A9
+:10862000DCD948EF3E8DFEAF1B85CEF373BE9EDCDA
+:108630009B91736D745E91F34FB713D78E4457E6D9
+:10864000E6F640902EC66564BF0540A109A3D35548
+:10865000DFC1F1AEC26D0149D5B7B1A86F815FD658
+:10866000E5FC03F2A7720EFC3A06C11797BB8B809C
+:10867000EEDF5160D6B31CD7E14D056A79A0C32D5A
+:10868000A1DC81DF0BA9073733117E39ECEB3E53B8
+:108690000EF56FD83B54EEC3F28AA228A53DE6162C
+:1086A00058B07EDBD1936776D33CF6F0F5EBED97CF
+:1086B0003C5342E05C80AD21704118BC8FD7B74974
+:1086C000FDCC4EEDF8F97A85F60517E71F4F883D8A
+:1086D00002949C1B8DF6E471C17E1FD07F45D1C7EB
+:1086E00006A45770FEAF2C77A780BC3C2128F07FF2
+:1086F0009CC1F9AE38CEE11F1C7DBDC32729ED0119
+:108700009E372A68D6770A6E11DADD5820F8C7A599
+:108710000FC7F30F86F8561D07A860EDF7CC10F7CA
+:10872000F5BEC7F54DDF8FA3EF03C6AFD1FFCD4533
+:10873000CCEDB70CAFF773558E7E0EB0DA3EE0721B
+:1087400019CCCF9F3DBC7E8F52BF4FA753F075B65B
+:1087500003F9A7CFA0E2F34F0457300EFFC7D13F74
+:108760002DF771BE65EEB0F95F6DFC3FCAD1DA0B33
+:10877000F8236BBF0F5C0D7FCF0FC39FC23FB55A6D
+:108780007E8A923CA72F433B5171821DEDE24D1E24
+:10879000F36EB4FF83FC3140FCD1676643FCACE56B
+:1087A000FF8BCBCBB3C9FE51EA5FEE40F9E6D10DAA
+:1087B000D5E7EB41E52FF83E0BF8094D64FCFE834D
+:1087C000A3973A7CD9441F2A2758BACA7AE80C835F
+:1087D0008BC2D68FC2FFB47E51CE037E268C20671B
+:1087E0000C2E8EDF8F04B61CE5645F19B713FBC631
+:1087F000F167A64B20BCD95C1C8F09CAB32F220499
+:108800000F29413AC34F00FD909079139EAAE2D4FC
+:1088100079C7562DCC80EF6378B9EC8A7AC4971269
+:1088200084C3DB1BE78AAD42BC04DB8F7E13E552B9
+:108830009582B74C57CC9B0A5F09B82EEB884180D4
+:108840002F8E0B3E11FD04E48B11E6FD97E17CE5D4
+:108850000BFBDEADBFCAF79F0C5F97EEB0EF993E02
+:10886000F7EB7CAFD06D61185DE785D1B53C0CAE00
+:108870005661BF46FEA9727175D7836D09308FDBD3
+:108880008F08A86642F839BD0AD7E7ED76957FC70D
+:10889000BD89FC1AE4E7F184E7A59DAA3CCC78C425
+:1088A0000D745B82F2B030082F437941F0842AF7CF
+:1088B000B4507D91F908CACF9BDBD5FA13A9FE8A83
+:1088C00056B5BD2C82553A32DFA42AECBF2A57D1C7
+:1088D00017BEEBDEC4F20D27F8F755C726BFE9CB6C
+:1088E000B8CA7AD81386977D61B02FACFEC35FA15A
+:1088F0005F5AC3BEBF37AC7C7718DC1106B76BBFBD
+:10890000AF5923D03AAC017E40427CD5BABC4D5918
+:108910009743F480190816B2DB34EBEA86160EDFB3
+:1089200071ACA0AADD1202BB0A69DDA8EB42CFF848
+:108930008F318ED1BAD08F222F6B5CA3F06556B8E1
+:10894000BEE5E57FC45F93D00E661ABBA047D4C2D4
+:10895000DDA23AEE796F6ECDC6972A7C7D15FA07B7
+:1089600037FC9B765EE0AF2A704555794A885DE218
+:108970002BAF7287CC53AD3FF78B2B22F6B7D35575
+:108980005E7508DAAF2E0B4CA8877AD531FC097AD0
+:108990004D44BDB95989C7CC7D41F4A05EAB8E086A
+:1089A0004C68C80E9927EBCCC47976DF23127D7C06
+:1089B0002D401F8CAF317030C135EB8E8A6A3C0C74
+:1089C000F57BEE111B518FBEDD189B80E33FEBE280
+:1089D000FE424FD4D884B5007747AE32C850AF7B43
+:1089E00047053D4F89EEED03B0D6BE7F6C599565C6
+:1089F000129647117E9E702DAE6A06BE3EEC92E93D
+:108A00007B6F8C3DA10BEDE7FBF4EC4919C7E3DC70
+:108A10004F7C73BF3107FDE79AE6C909684FAEFE88
+:108A2000D7257393A0DEEA36BD53A07A6C2A8EDB7D
+:108A30007B5F8501CBD7B42A4FDFF5F47CF1CB27E0
+:108A40005A6C507FE071C17910EACFFEA4F3D5A92A
+:108A500000AF6F1FEF44D29C1CD4313BF4F36EC7C0
+:108A600044BF08FCF89EB9FEE545BC3EC3FAEB3FA7
+:108A7000975F5B948BF545FB36A87F16DEA33D7CA4
+:108A800076A77850C071D9AC11024CE9EC17F26BA3
+:108A900068D742B97D1BBC3FDB765B02DA596705BC
+:108AA000D926C0FC7B8ED55439805FD67718157ACD
+:108AB000D624D5C0FC6B7443FC42FA635D34877BDB
+:108AC0005C35554F227E1F9968433CCF9AEE3EEDB0
+:108AD000023C9972DD2FE1F33D33D7532F7E29AE4F
+:108AE000427BFCE717562760BCEE57CAFA3939B803
+:108AF0003A617588BDB3EE2389E8FEA241DE8AE3C0
+:108B00007C312255407F19E81EBB04D6EF1AC5FF01
+:108B100000FE6D7C6E04BBE76997487CDFBD2BBE11
+:108B200048D6F0713DC94FF21B00EE3FB6F1111F60
+:108B3000C8D7F78D8DEC3D5C7CF742C14C78F69838
+:108B4000297EA57FC6EC37A763FCD33D17F9993979
+:108B50003A33975A43D69D52FF0F3E2BD5FF03D48D
+:108B600047FFED0FBEDF5B9965B81DBFDE66F5A15F
+:108B700031F181D52A211DDE969ACEDE0DDFAD7B47
+:108B80005C4F727FDDE3F1F70EA0BC017EC1F858A7
+:108B9000F8BCA64CD713BE465D87BE6F6BD721FBD2
+:108BA00036C9EBD1D6E15F8FDD5B75C832FA3A5C2E
+:108BB000AFF829731FD77B701DADCFB34A0CF447B4
+:108BC000D9E32F3D89FCBE7E8BD9658481AF7FDCE4
+:108BD00048F4EAB75A7D7628F7DAAC52343C4DD3E4
+:108BE000397DAF9BCED7CD1C914926173D5B314EC9
+:108BF0007A09C6130BF0F9C6BDDF9D01FD7CC8FCE8
+:108C000037CD00FC5D4282015E2E1D17297EC824EF
+:108C1000B75409F2B19671B950F7CA738652F8B5D4
+:108C2000B67EFD42F4EB6EF3EBDFED577CB62BCA5C
+:108C300034519E6EE6AF40AF6ACB37B3DD17C5A99E
+:108C4000C4C6065C8F759D61E5F5D77F80F197CD31
+:108C50004C7AB75F8DD7C238E4E9D6B8B39100B883
+:108C6000980B30C42ED5EB33194C71BD05D615CCFD
+:108C700077CE3E81C6BDBE51F41BA1FE9C581EF7A7
+:108C80007DBF09E83F91E6EDB303BCFE61AE67D658
+:108C900033C16F825FAFDFB745C2F5D081F205E324
+:108CA000D402F3207FBF6776A6A1BFBEEE7133E189
+:108CB00077FDFEDB7EFB087CD7DF5C1917EA1FE738
+:108CC0002B7C01ED33534CB09D0F9ABF9D86FC3F2A
+:108CD000E77BE0E7C27CD747B31F56A523BD92D2FE
+:108CE000644BB0DEFA6DF764F27AE027C3BC6B76B2
+:108CF0008A340FF6BC91F41EAC7507C965059F6BED
+:108D00005A5F3118B2514EEFEE13A1FEBB008B1625
+:108D1000C2974FC1A301F1B50ABF4DE2DF38F2158A
+:108D2000BB5B2639E2C5F955EB84554B49AE0F18AC
+:108D3000685D4FE7F1CDAAE9DC9EAD4973DE427173
+:108D4000E4078C4E9453F823AAE300BFAA4ED7B78A
+:108D50000EE3B9ECC7468A8F6C6E35BBCD36F23B5D
+:108D6000DCC7707C12930C808F8D3297176B143E8A
+:108D7000DC2C2FB91EF906CACF48B8BF62E572B124
+:108D80002E1AF0CEED54B70EFAF9187F1BCFDB4D3B
+:108D90009A1AD2BFA0BC8776645BB0DD5E1D6BC73C
+:108DA000380BD69F3415F1187BD3721CDFB322AD7C
+:108DB0006798FC030568E73D2B4E47FFB66667CF13
+:108DC000DC0E848FE6D8B1C99A1FFE9AF4C6ED0A6C
+:108DD000FDFBD1DE473D02F051787E7B3AD7FB5E4A
+:108DE00091C77DBEADE049E503B5BC6EA79EC7DF68
+:108DF000DB8C64C7D435FF8EDAADB3F625A0FCADAD
+:108E00007B5E9F8F72DAA78C7B75736AD119E0AB9A
+:108E1000D5FA28BB00AF36FA2A0D086FDC23101CE8
+:108E2000FC2E3E0DF9F4CFAD3FB121FFBC670E4CD7
+:108E3000407D34B0C5EC3C881350E26E7F6E9D706F
+:108E400010E3336BEC7D5601CAD76C1D1F83F2FB18
+:108E50006D7BC080E56F77A6EB1076DBED4508BB38
+:108E6000A56904FF1944198F2B31F29F37099CCE55
+:108E70001B9FE9318C83FE9E54E6FBD1B3BFCE44E9
+:108E80007D5597D697897A05F8203319F1FCB440BF
+:108E9000FA78D333A2DB3C35C8079B900F60DD6DB9
+:108EA00050F860D3F19F7C0BD7C326A4BF6B381F4B
+:108EB000019F9EA6F7C70ECC65FCFBD3C827AA1E50
+:108EC00003B8558FF1348302433F081F9ECED7135A
+:108ED0009497F3725F36C953D66F40BB737397DEB6
+:108EE000D71FB2FF331A9D7B143AAE6E3692DCED7B
+:108EF00051E6DDBFF3791BD2F1A3677B5EC6FD921D
+:108F0000BA63A0ADE511D6858297CD88071BCD83C6
+:108F1000EC8BCD386F5B100F43FCAFACC7CD8CCF63
+:108F2000539DF76649C1835AAE7C7F5AE19B8D4CB5
+:108F3000C1DBF1897CFD29EB0DD733CA55757EDE87
+:108F400018FEBDCAA7E715BDF08632CF8DC017CE7B
+:108F50006CE21FB741951350F4D1D10314FF51E9CE
+:108F6000A58EFB6F417DE28E8E09D2B15FC76A3B51
+:108F700047889BBCABE0EF9DB6C4B42EC0DB9FC15D
+:108F8000CF427B0AF9550AE94FE51BB5BF393F5877
+:108F9000B200E70BED07B07DB5DFB77D9112B6F3F8
+:108FA00036E3EB03F913E5A7BA2EE7B4AC5C9063A4
+:108FB000C37A1F59C767E37CB95CFBDB743B3DDDBB
+:108FC000682FC0F7EE2E81E2CFEF287EFD3B6D3F8C
+:108FD000B1AD0EC1D367CAB8553EC31F8C4BA9E3D0
+:108FE000ED8DE1F1DCF071AB72481DF79C1D372F60
+:108FF000C0F7EAF8557E55F953C5A3CAA7ECDE7849
+:10900000B26BC2F995784DD5ABA246DE937EBC3EDD
+:10901000E5A2C16B19FE3E1C56EDA1F7304E83F25E
+:10902000E329D14FF2A3D5713A2344CFC38F2554FE
+:10903000EF346FB9DE5E8AFBAFCF084E347942F46D
+:10904000CB6E2944BFA876C12DB9E3B8BC8F739FFE
+:10905000473A6E3CD737D72607EDD0D99F04C428AE
+:109060008C4B1D4F7785EAD38D174E13FFD7B1BEBA
+:10907000EDE847D5ECFC75E50CE4F3A7F4B43F53F9
+:10908000D3566140BBFEB6276FCD473E7AB77D3CD5
+:10909000C9F5F387F2A6135F317BC24DC0FF6B0E9B
+:1090A000EDBD6905BC5FD3253A49BE433BB86E6B45
+:1090B000EE9CCE906FDE33F75716A2FD7EB7684761
+:1090C000FB7DD69379F762FD59D6B1D1380FF7A160
+:1090D0005882DD5214E907D5EE7D5B91932D7ACE4F
+:1090E00017F372F97A2A197A727E9BD3D29289FB8E
+:1090F000E90307403EE3BEB241EE0C607F2F2492AD
+:109100007FB119DC2107D0FD9CC0EDB25A03332595
+:10911000B9E8BD2909DEBFA2EFBB13F5C82B775A0A
+:10912000739A7100E2E7F9ABB93DCDF70F6379FFB0
+:109130002ADED4715CAFF41FDE9EFA7D2FFA11286F
+:109140004F95F19F6F7DEA26D483E78F4C88C179D4
+:109150007FF082B91DEDA90FF45C2E0EF9DB7EFDC8
+:10916000FBA1761AD8751A18EC380D0CFCFBBED68C
+:109170002EDCC6ED8B5CAD1DA7F27BF5960951A1E7
+:109180007904E1F63BCB08DFB79911C5469037EA81
+:10919000F34213200A1835156D7AF8BE3CF28BE7BE
+:1091A000FAD0DEDF63B41B619EEF23FFE3BED4F38E
+:1091B000A21FF761D036C7F5F0FED11C3FFA91EB44
+:1091C000DEF2CEC5F64F3FB883F20CD6827D9928E9
+:1091D00084D8CD0F3F7813B2FF25A7777B127C7719
+:1091E000E908CF8B80624B98BDFC7292FC8FDBCB81
+:1091F000D76A27ABF186ED88E7C9F0BB933911CF69
+:109200002A7E55BFE945E083025748BCAFA996ECDA
+:10921000E40B4D5E7A7E2CBCF3C02CE45F6B94F3C0
+:10922000207CF6F3AEBD6232D2F978CEE7E8F716CD
+:109230005AA2ECB86EFFD2D4489B8F179AEAE9A9DC
+:10924000D2598DB7CD3EDE4DDFFDA56BFA8959F0C1
+:10925000DD494B1497FFC3F67B383DC3F340EED88E
+:10926000322311DFABF3FAF06E4E5775DC1F1EB9D7
+:10927000D586F3EA7E2CF6C44CA46764941DEDBD3C
+:10928000F54AFEC7D90E6E4F9F33451D5E88792380
+:10929000FB96253090B36BBBBF7113BE5FF7826046
+:1092A000473FC0F9C2121BFA6B7F92FA6D767CC2FF
+:1092B00077011C8FE417511E15CE63B41F5518900B
+:1092C000989C4E5BBDC42F332F487ECC1BF933EEE8
+:1092D00053613CE4F3088A873065FF69ED4F791CE0
+:1092E00065C8BF55FCBB59CABCDFCD8DE1FCADBC28
+:1092F0009F53C0DF7FB0EFB945D8DEF9437A3B8E8C
+:10930000FB2F87F4D4FE06F0CB7430DE7347B8BF72
+:10931000B3A153203FF9FC11D0D730AFBA2D7AB7A3
+:10932000216A381FCE81F27E4B900F37B8FDC4DF23
+:109330004CE14713FC7765DC707E8C669DDB111F6A
+:10934000FF285F9E095BF743FC381A1F28F8C27597
+:109350008CFCA8D27B4307DF578FE9CC2945BE524E
+:10936000E9AFCA095F19CB42BDDA6260599887E359
+:10937000D34538717D2FB1C87A01F0B02CAEBF1C37
+:10938000C569451E9793E21C9D5B87FAA5C5487287
+:10939000205C8E5CCCE5765223F234FCB3E6713B64
+:1093A00042CFEAC90F519FA07752517F2F898CF984
+:1093B0006F19AA7C79FCDB2B2418FF925931778E28
+:1093C000778253F67CCB0A09F877C9F498E7C7018E
+:1093D0006CCADBC6CBA7C5E4E9016E6E6E5D510EAB
+:1093E000F0843CF7E7B9F1C17ED476E1FD157CFF4E
+:1093F000CC64AF2E2F1EE5BA85E4F4C7C2C0D4C634
+:10940000F460FDD705F6F6CF8520DCAF676968DF2D
+:1094100059B1ADF8D19F8BF2DC917979C3DFAF669A
+:10942000AC8DF2E77CBF3823703FCC63027A2D56B7
+:10943000F86AB5C912207FBE5D7F6188DEC847CE5D
+:109440002809E9BA48E1A3C552A01BBF9FC45AED41
+:10945000674D6442EDBB123BBAFC8685C7CEAAEDD0
+:1094600001BF7CAC87F9025F0BC09E8DB0640440E5
+:109470007235C82FE1C42F3EC3765B7CACDF4C74E1
+:10948000A8B6A3DC13985777059E7591B6A918372F
+:10949000A98B4CF323DF373CFFD16964AFDB54FB6E
+:1094A000C55B40FCBED5CEE7C3BC85C48F772AFC24
+:1094B000F84113ABCF80A5B7B8AFCF26C3A02F2CF0
+:1094C0000A64E27ABF9CE6CD453A7CB0AF25A5019F
+:1094D000F8E7A36346E742A87FCEFF1CC5E1362A22
+:1094E000F6283B14AFAC7B315002F57AD3271D44EC
+:1094F000FD529CC7F5F585F440DA3D2837D2B9FF17
+:1095000003F528CF6DDEB6EBE3B1DE85A33B32D6A3
+:1095100002FD8C12F35963E8C96C30EFF9D0760183
+:10952000C07A8045DACFF5537B58CF86FA5EBED538
+:10953000C1E3EDCC837245A5974A8761F48121A0F0
+:10954000BDAA33313D8E7F12DB67C7F5AAD2E9038E
+:1095500013E011E36726C023ACEF0A0C3AE4223E85
+:1095600079BCA541E86F8D45F85981F2E686EBC1DB
+:10957000270D88F2DA7DB792FC51E58E0CFF8D2421
+:1095800077BE76DC68DF9C11E5CEFA3C45EEE4B0B0
+:109590009C2BDC4024FAAE57BEAD10AB6509C71D4D
+:1095A0006F72623CADE1F1F1A46F58F67FB2D07AF0
+:1095B0006C5F2CD7ABE922E1FDB62E81F21B2BBBF1
+:1095C00092990C450BBB62E9691B4CA2F7E70FBFF0
+:1095D0009ACBE512A74BE5F713CB28AFE8FB13E9CD
+:1095E000A98EA341E1BB0A31BB3380768405C60155
+:1095F00070C32B5C6F35DC28525C93A1884E4062AF
+:10960000F21F8FA59DE23F1E3664DF0B57284E2BBD
+:1096100047215D3CBD2243FE016FC3C7F16C6A4622
+:109620003C1B1D3A268F607F18153A99E50826875E
+:10963000F81D926FD2778A301EFB0DBDD30FE52D3A
+:1096400066DB415C4FCCE7EE437F61B9F25D9F99E9
+:10965000F34764568CE6FB1DB6B9BDC86FCBDD5C25
+:10966000EF589D6334FD1BC58D7A6432E6E5F6A2A2
+:10967000CA0FC497D0EF628F40FAF5C6E5501ED2EC
+:10968000AEBEE822C9717D91D6CE347AB4F5BEAFB4
+:10969000D27F129B144AFF20DE2D6EB4D32FB9ADBA
+:1096A000C4C7A0DDFFAD08E09B7AF50CE76B8CE04A
+:1096B000F3BA8498C2B8A85BF463BC6407E201DE25
+:1096C000471568F119EDD6E22F769E161FF11EEDB3
+:1096D000FC13978FD3942779AFD39427D7BA3470DC
+:1096E0006A7DA1A6FED8C6320D9CEE5BA0A93FBE46
+:1096F0007DA9069EB06785A6FEC48ED59AF249FE66
+:109700000D9AF2C9471A34F094CE7FD1D49FD6B5C2
+:109710004D539E13B84F533EBDF7210D9CD7F7A86C
+:10972000A6FE8C330735E533FB9FD694CF3A774CB2
+:1097300003CF1EF899A67EC9E0290D5CCA5ED5D478
+:109740009F63FAB506AEB0FF5E53FF7AC77B9AF20D
+:10975000F9F29F35E537645DD6F26B04977F95CEBD
+:10976000BF69BE1353BC9FA23E60E20509F9B6650E
+:10977000A5C062319EDEBBCC847260308C0F3FCEC0
+:10978000B52B7E0D4B43795621160570DD5EEA122E
+:1097900068FD87EB3BE9CF1E37C6F3D84F0427C6D9
+:1097A000D9A2406D4921FD47BB4DE04806E1D8797B
+:1097B000760D1CEF7168EA272E9735E549DE2C4DB2
+:1097C0007972AD5303A7D61768EA8F6D746BE07496
+:1097D000DF3C4DFDF1ED1E0D3C61CF724DFD891D4D
+:1097E0005E4DF9247FADA67CF2917A0D3CA5B35174
+:1097F000537F5A974F539E1368D7944FEFDDA38141
+:10980000F3FA3A34F5679CF16BCA67F61FD194CF2F
+:109810003AD7A981670F7469EA970C063470297BDF
+:1098200045537F8EE9750D5C617F5353FF7AC73BCB
+:109830009AF2F9F2794DB96ADFDC907551FB5EB1AD
+:10984000772A9D9F69BEF795B919F287EF98E06C6A
+:1098500091417EE5F3F80BC8F57EB388F69187E277
+:1098600046319820087C1905420CF90A5D856A8A00
+:109870003FC551DC9754938CF93E60270010A34BF1
+:109880004F477B3A3268B7A55C997EED76DB1A6864
+:1098900013F97C6FBEB72A3F0FFD95A373D16EBF3E
+:1098A0008DF9B6E33840EF45F5C3FA78CDAC8D6756
+:1098B000A8CFF926C04B487FAF98F7A4B8AEE2F71F
+:1098C000CF375DA0FA43ED2A710E01E6D710D2FE24
+:1098D00003E0574860D7ED698275030EE3434D7688
+:1098E000821F6E7210FCDD26999E1D4D59F47CB4CA
+:1098F000C949E5FB9A0A08DEDFE426D8DF348F9EEB
+:10990000079B3CF4FE50D372820F831F8DCF23E060
+:1099100057E3F369F08FB1FC19F09711FE61938F53
+:109920009E9D4DEDF4FE58D31E828F377510FCE3DB
+:10993000263F3DBB9A8ED0F3674D9D547EA2A98BE6
+:10994000E0934D0182034DBD049F6AEA23F874D36E
+:1099500019825F6EEAA7676FD3397AFE7BD30095D1
+:10996000FFB26990E0568CD7023E1ECCE77E908A0B
+:10997000171566AC9CF841B50F17A19D8FCC51A06F
+:10998000FF8BC6CE0FB3B7C3E9F1A11217D69781EB
+:10999000B988F1C33199075B42FCACC795FE7644A8
+:1099A000309F19F8BD59C7FDDAE6184679D64CB193
+:1099B0005FD72B7CC9E2B8DDBA4E19D77A653DE492
+:1099C000217F66117FFEF2EBF815AADF9832C5FB06
+:1099D0002CF167AACE47FEB3C59F89F673C9146FF1
+:1099E000677E3CEE37AE7D99FAB33B69DFB1D218A2
+:1099F00088BF19E323AF8814CF1BADBFCD4AFEF853
+:109A0000A8E527CFA7A0BD3DEF4BD18B787A4D6F4E
+:109A10005D8EF1829E7C1E7FEEC9D7699E2F4DF12F
+:109A20009EC2F17C6AADBF4507E3FFB478CBE13B52
+:109A3000D283FEF4627449C10F5AC2643DE52732F5
+:109A4000F74BE9D0D48D6060217C33F3D1736EB6CF
+:109A5000F7556CA70A0C7184BD85C6B491E6153E16
+:109A6000AEDF2AF4FA6DBE4EF3BC3CC5FB1B3E2EA6
+:109A7000378DEBB599D767E2BCD471E54E9595BCAF
+:109A8000E481FD38BE4F5FB87856181FC4BFEAB7EF
+:109A90006F2F55F24AB6083C2EA7DA6B4A5E8AEA67
+:109AA0007754DF29F8D15E5F09FE0EEE2FBDA5D8F1
+:109AB0009F6F99B97EBE54AFCF42BBBE5A8870E249
+:109AC0003EDCA5FA3F5950DD427D86FB242D98737C
+:109AD00000E52D770B94CF5D0DEDE8A09D6A0C0499
+:109AE000E277F70AC47F13A7A6D3B8ABC1FC233F24
+:109AF0002B6E200DF74B815F2EE37C37CC147D0657
+:109B0000B0875FD3F93305DA975E6B10609CEBE3A7
+:109B1000804FC68DCE0F9B94F307EA7BE0B32FB046
+:109B2000BDBFFC744616C5F14FCE94116F2D3A7E21
+:109B30001EC9F7EFA293E7BB70512DCE9A42714A2E
+:109B400026399D1867AA54CEAF748BACF1E8087221
+:109B500074EC0CCE4FAF39F4F3FCD4AE76BF267163
+:109B600006A763E20C4EDFCA53AFA4E2F9AB4DBDCA
+:109B70007AB247586E7FB6C73AC27C1A77DD951124
+:109B8000C2DF9BBBDEE1F91AAC3F3B343FBD40E98D
+:109B90005FE527D160F51EB0848E6F88BFD3662045
+:109BA0001F45037F8F27FE3E8BF6F622A31C7533DD
+:109BB0003CFB014501787ABF67A77C2335EF680D30
+:109BC000F3D0733DB003F2B3C7F7A001F1BF8175C5
+:109BD000D2FB4D05B7A621BC990D943BD09F686F71
+:109BE0007EC901A35CB6E7C10A8CCF2EF5D7BC8431
+:109BF000CF258784B3E8BFC2FA983603E327427DB6
+:109C0000DB18E86FC533A56DC9F07E91C8E9C15E68
+:109C1000E5F400BE718B31C3E709EB61067EFF6995
+:109C2000B49BE621DAE669D643F536E616E282F918
+:109C3000F343EBA3E0F63F26A33F240DD0FEFBE663
+:109C400093C618A4F306C6F57730FEA1EA6D467CEC
+:109C50007E3B8B7062BD0F15BEFE3095115F7F2875
+:109C60008083E70ADA932CCDEB708D0FEADF0F7556
+:109C7000FE7CDB78D2CF8B10EF2F3B96C91837BB19
+:109C80003DCEE414B13CDA9FC6F75187E43CBB12E9
+:109C9000198C7B3DA0E771A8F07109052F7F86F62E
+:109CA00083D1C07CB8BF01EB9BE5E3BA1E63A0750E
+:109CB000D582A8C5F85999471EA9FD56A5DDDE2F06
+:109CC000B81FEC83F9E079C961FDD8957E22783F11
+:109CD000AA1EC1FE488E24304D7F9B31C905D78115
+:109CE000D54DE36FD64593DCF978AC7713D24B8D25
+:109CF000FFA8FE616FFA0719E4C77FDE9282763A09
+:109D0000F02FCF4B2CE6F2E935BDEC43F8B5D27419
+:109D10008AFFAB727771018F972D56E3634561F12E
+:109D2000B1B0B80C2B1A395EC698538FFD4E626FD6
+:109D3000A9F8A178CCA92289E8EE03BA63BCF9940A
+:109D4000E2A7964672FFFCF73362899F62E66710CE
+:109D5000BFD9625980F6A3AC22F15B0FCBB1C484AA
+:109D6000C889FB9438EB6EB08758487CFDBEDC0692
+:109D700013E61BECB0F0738CF79745D486E6BBFF77
+:109D80006EB69EF0797B71E92BC83FD9167F19A971
+:109D90006DB724E37C04657E93ED807F1D36ED5125
+:109DA000E2A54E138F4F9593DE56E97EAD7AFB699F
+:109DB000C9BF2D02E71FC7681D5A3BCC244FC54EB3
+:109DC000770053AF27152F3D4CF4943C59D84F776B
+:109DD0007E04B340FD4FBB0DE4E79FD4ADFE1EE60D
+:109DE000C50FBC6964B8FFD9694D96506F747E7118
+:109DF0005D393DADB3E6321EEF8CD481A0C8B1B35E
+:109E0000277E844453CE9F750AAC9751DCCD1DA9A3
+:109E1000035FAC53C72E97C0B88E595C7BA711EB7C
+:109E200079449CE77B45DE9F225EF2593DC1F71BDA
+:109E30003CB507A0DFFB634CC42FF714794EF071DB
+:109E4000B2B68530BEE23902C3F3BC6D066E9F59CF
+:109E50009D117C6F8A713BDF339849FDFF429197DA
+:109E6000AD0E771F1E1C19156F766960283E427C67
+:109E70009742713D158FA1F4B2E76BE8E5D587D223
+:109E8000AB00E83525945E6EE1EBD0CB8F4966F1EF
+:109E9000C3F9D457263F589ECBF51BA6CA85F36954
+:109EA000A971B605F35CBA6DA20EE9D61D919C8D21
+:109EB000F139954F55BE1D815FB7F4A0DC4891EC98
+:109EC000B86F6CAC8CA07D18957F55BEB514F2FCB4
+:109ED0002DE0DF5585F05C69F154A06C09E75F8CDB
+:109EE0009385F269F5A8FCCCECA1EB7811D815515B
+:109EF00031680F9D3BD419C2A7D5F517252E57AE53
+:109F00009444E407E37A8B8A04F66E28BDE1DFBB54
+:109F100059CAFCC81E92C80F53F17AADF8D77FA377
+:109F2000390BEDBBED786E11F0D52E38DD8918EFC9
+:109F3000AA7FE70E7CDFA69C1BF6651BB8DDA5ACEF
+:109F40001BB5BD49C5655105B82F30E342E43AA8B9
+:109F5000F769824E46E4B4C9AB7F44EBF04C24C3AE
+:109F6000EF6CB17DB54FD0BA9AC870DFF0D3DBBCCF
+:109F700063711F7F27D0E95D4AB2F627EA688FAB8D
+:109F80003F11D71520D7C19F5E077FCF94723FC185
+:109F900087668E53F2ACDD4AFD7EAABFD3B0C714EC
+:109FA00081FDA49BEC0743F8BF4489BB5716A8E783
+:109FB000755A64B4D72A0BB85DB3B7E9C8ECF72774
+:109FC000E0783A67BF0FE3895DE8675EE0EB882CD5
+:109FD0009F8CA921A62FE70878AE815DC73A311E74
+:109FE0008FEF9BA704DB7715F07567423B06E867A8
+:109FF000DAE69343E5A849277847CA83393C53E218
+:10A00000DF6D63546E3AF5089DF38FCD700A980F9B
+:10A010006DDAB687E13E8D39C0DFC765B885352179
+:10A02000EDC62D847187F005F0972F0AE48FE920A3
+:10A0300030662ED22182E292E1FD2E8A2FEB956CC2
+:10A04000A3F34938BF3185DF54BE51E74927564253
+:10A05000CEEB978FE376725BA3E100E5A116441384
+:10A060007E3F892B8B6223D89FEA733FF081CF8894
+:10A070007EB3899E07C1EFF64D44BFD941F061F030
+:10A08000BBF17904FC6E7C3E0D7E37963F037E3734
+:10A09000C23F04BF1BE14EF0BB113E067E37C2C774
+:10A0A000C1EF46F8C7E077E3B30BFC6E7CFE0CFC17
+:10A0B0006E2C3F017E37C22546E00F9C4F96CFB1F4
+:10A0C00014E8DA7EB7C18D7984FB15BAF6B8C7C536
+:10A0D0003A81FEE62C1DC5C4CDBF7C88E17CCC0E48
+:10A0E0001D9D0BDBEE7888DD8AFE6CBE95ECA9B673
+:10A0F00067B99D6296F632943BFB055F2D73C2FBF8
+:10A10000AE926ADCDFCB706C298B01785757C53E65
+:10A1100013AC8F4C79C9F2E61058B6BA361CB507A5
+:10A12000E1B1D90724F058D89E8279FBF048108E0F
+:10A1300003F3871FED5A50DD0C2C1418C7C8DE1826
+:10A14000483750DECE1AA417C6230A783CF106D64B
+:10A15000E2C0FDCCB132784502D50FB0B86BAFBFCD
+:10A16000BF40A6F7E1DF5DAD9E2EF79AEA31F12AF6
+:10A17000ED61B97095764CC232531F8C7D975E911C
+:10A1800053F1169253ED18DF01BCB79BF9F3BF678B
+:10A190002A7ECECCB25533E1B96A26A76BBBD9670C
+:10A1A0002FC3FEA7E8289F8135A6FF7A1CF477D736
+:10A1B000BF4B0CF34155FE7C5EE1830963AD742E09
+:10A1C0009FDD63A2FDFCEBC73EDB1A03F084279CF6
+:10A1D0004ECC7BD8C59C11C827BEDD3ACA7BFC415A
+:10A1E000EEF89825507D72DEF33128D763677279D7
+:10A1F000E357F2859ADBD68DC578D4A7AF7379780B
+:10A200005AE9E780BEAF9EE89967213B04284FF6E4
+:10A2100046B303880D3A5397C49F06BD7D05D633D8
+:10A2200080618079D9862F6698D0DF6B1934CEE3B0
+:10A2300079B37D648718CC5E7B34BCDFE3D3915C5B
+:10A2400068912D94E7B6CBE2EAC573CE3EBB8EF2A1
+:10A25000617765EB088FAD969BFC68E74B42732DE9
+:10A26000EA31BFFD98291DDEFBB37594DFE8772F37
+:10A270009D87B0CF2B51FE15FD60B93786CE77EFA5
+:10A280006203AF4EC3F26A6E87B525FCF55424C64F
+:10A29000BF6FB43BF9760B93313F8C52C574E877AE
+:10A2A000F76F8BC4715431C59FF591FF6A3372FA11
+:10A2B0007DA77BBE7D1CD91921FB5A468CD5394D13
+:10A2C0004E289F6A71CD43FF52B2BA4C98F7D76AB5
+:10A2D00077996A68FE3C5F8DF232A0DD16BB8EFC7A
+:10A2E0005C2CBF359BD4E1E98C7C25155FC6793F9A
+:10A2F000D48DF890D632962EE3F8245FE8BEA1699B
+:10A300007C51AF0CF3685F1743F3900427C16CAD29
+:10A3100044E31E2347D0B9E6BD86CA5EB417C7988A
+:10A320006EA7FDADA45A49B3FF94E8D5C2F1CBB5F1
+:10A33000702C9382FB57D0AF7DA61A7FD3E22D1CE1
+:10A340001F49F6D6D771FC495E3A04396CFC8FD8A8
+:10A350001F8E2E65384E0B8D33C1B2BA14EDA67820
+:10A36000E66946FEFB47C739D5BED4940EFD4F8D36
+:10A37000D39179348D0D6CC3767729FCDE9ECEE9BE
+:10A38000195C5722CD0BD6E53C5C97631B75E0B09A
+:10A3900005DB4FF781E3A6D93F88D1C013F68CD1F6
+:10A3A000D49FD8314E533EC97F9DA67CF2119706AB
+:10A3B0009ED259A8A93FADAB4C03E7041668EA4FFB
+:10A3C000EF5DAA81F3FA5668EACF38B35A533EB329
+:10A3D0007F83A67CD6B9060D3C7BE05F34F555FB48
+:10A3E0003E5C3F96CDFCFBEC7AA3638CE67E9B70D3
+:10A3F000BF21DCEE377DD9226F437EB619889F25B9
+:10A40000D4E7B8DF7C37F78F4CC54E19E54B81C2D6
+:10A410008F9F15BB1723DD4A6D26D20B9285D793EC
+:10A420002C73C95E49EB30D0BD3B929D0D9547A280
+:10A430007C6EF2CDCE98101CB7D9BE87EEAF28B592
+:10A44000CD63988FA47E2FD9DDCC6BC5FE64EACF97
+:10A4500064F7513DB30CDF87CCE3A44EC72C28C76B
+:10A46000C18F43FF6034BF4DF5D7543F6D34FF4C6F
+:10A47000F5CBD2742C029F0784FE3BD07FCFAE7FFA
+:10A48000BD2C9191FFB605E77D3F9EDB46BF6D2A4F
+:10A49000B7B3DA1216C818CF694FEFEC1D87E389FE
+:10A4A000D751BC14EC66E7D2107BF1B199DC0E9564
+:10A4B000C6B5F7A3FE6B8836C9682F49A603B3DF7C
+:10A4C000077CEDD7F73F85F18956C1BEB113E5E2B0
+:10A4D000DD16CA03D9ABE04DB6EAA66F83763B9B87
+:10A4E000DD129ECFEFDCC99CADB83EE24AB745C352
+:10A4F000FB0929353A0C034DCC68DE86CFFB67F2A9
+:10A500007D9F49D90774B1503E39B77439C6BD44EF
+:10A510003BF4779538B468EB60381F96219D45BEB3
+:10A5200042EBFE0A0CBD34C644FB9266A4B7404F12
+:10A53000C28379D0E237239CC1F162760BFE488159
+:10A54000DBAD9847571AD341F455ED59B473B1FDBB
+:10A550007B8ABC8F213EE3166AE92A990E113E766A
+:10A5600029FB12EDD1F22F513FB7A767C4E07E96C9
+:10A570003A4E55AE1C56EC7BF5BD2A571C986B9392
+:10A5800017B46F80CF3B30FE6696F6D0B94CF3BD62
+:10A590007B18F2B5194FB193BDEF933DA43F3C9AA0
+:10A5A0003CB4F271CB4DA8AF2FC7B9C89E3537FE6A
+:10A5B00098C6178E37733FCF471B0DAFB6CC4749B0
+:10A5C000BF830096F13CCFA9044B6D68DC537DBA84
+:10A5D0000BB8DDA257F386C093407D7659CD4B7200
+:10A5E00047F2F14573B82773058DEF8E7857E2D5A2
+:10A5F000EC6D33F89BDE10BAEF943C26C443DBE7E6
+:10A600004BE6D1BC255A0C6CD717D907289EACF85D
+:10A610004B6EC53EA9445F0C9E69067E8EC019B77D
+:10A6200090EE3353E3209766F2FC45A78F893C8E6A
+:10A630003794B7AEBB328DC62A1B54BD4BA62CD760
+:10A6400053F07F37E6AB8C6F97B479EE8A1E57F5DF
+:10A65000F4843DDAF2891D5A78927FD8F7FF897A1F
+:10A66000FE46FE3BE8016DF9A38ABEBE11F535EE4C
+:10A67000677D83E78B98604457B89E0DEA3D900351
+:10A68000A99D8152149B295B254D9EC998307D78E8
+:10A690004F914C78F0F44A7AD4B36A9C265C0E0B46
+:10A6A000F75CD882EBA534325246F989710CAF9130
+:10A6B000FBE55EF053EE979CBFAB46BFAA57A43CA8
+:10A6C0002A954EE174AD2D14147DEA110BC93FEEAD
+:10A6D0009F8EFE3AF6E70DE94F8DB79C2FF69A3123
+:10A6E000BEA1C65D2ECD935E12E4601C458D0BAC01
+:10A6F00052D6CF2EE71BF53D308E9E33468A8154CD
+:10A7000088BFEC6DC23CA95489E4977DC6C6EFA111
+:10A71000FF5DF67B28C778A22C27925DDEABA738B9
+:10A720004099C2C7658ABFA5C65BD20B399FA72ACD
+:10A730004FF82282FBF58108B45F271F01D9ABA532
+:10A7400067242FE771B6299DE1E56ECA5FBA4EE135
+:10A7500017CC3B2B4DC0742F0E773221D60E749C34
+:10A76000B6BCFF14BA0ED9AFBC14817C78D4CCED42
+:10A77000B5A7157E48608213F3F3138E589C7EA80C
+:10A780006715D9D13E9887F3B4A4C9339B7A420B9D
+:10A7900067B310381DC7A18577CBF5B8F5CC7657D0
+:10A7A000834D0E539E59A8E46567B24CE4AF0AD1BD
+:10A7B0009283FE5343A985215E8DEF4CFCB73E94F6
+:10A7C00017AFF37BABEC91F283E5F0BDFDD5586795
+:10A7D000B31CA4FFD3E047A37EF8EE15276BD50783
+:10A7E000E35ACF003D33687FD94EE59D4057848FB3
+:10A7F000815F9D41FBCB59F4FEC7E05723DC057E0A
+:10A80000353E7F067E35BE3F017E35C2B71797DEE7
+:10A8100084FCF216D443BE88C8396E1A8F716E8BD1
+:10A8200048E76EC2F97147FD7B969B4156153BC6C2
+:10A830002E8C477ED82AD2F9E49B0AC72EC4F3DBBC
+:10A84000A171B5D0386330AED62FA8713523D0E7CB
+:10A85000F20C59C95F50E26B5E1E5FFBEA76DC6A60
+:10A860003B14BF1CD6CE501CD3E47B3F0B8F6C092E
+:10A870002C0ADE7F74F77F1D463D9398E4ADC579C1
+:10A88000D7E5BD6BE076373F4F95A2ACA37D669EC2
+:10A890004F9AA2E40185C72F8BE7BC73473CA0EC1D
+:10A8A0009E9FCD5E89FE7FF1EDEF4C4F03F854E1A2
+:10A8B000532B31FFB7F8FBEF3C970C78CA9AB58160
+:10A8C000C37BDFB99CE2C43C8C875762FEAF2D96F8
+:10A8D000EBB77DCAB9A421BDA7AC97CD8D4F901E13
+:10A8E000073B83213E5A123CA45F3F8E1BB0D540EC
+:10A8F000FDCDF10309ABAFA20F36371EA6EFF70966
+:10A90000CE737E1CF74C13CF3B55F4CD2585775580
+:10A910007DD360E6A03A1ED0B0F47EAF120762EE9F
+:10A9200064FA2ED6CCE11E5B21E9A507CAE45FC913
+:10A930007CDF92FCE31EDB75DFC1BCBA967912EDB9
+:10A9400027EEB5B8CCA8B79E53E418B4EFA3FC9596
+:10A950000A13EDF3B0B8E5B4AE63D47EE2AA291FC2
+:10A96000214619CFE9C28800C6075ACA4D07518E41
+:10A970003E641947EDB514187C189751E16D853088
+:10A980001EC067B42D261D6155CEA9716386BB6AB2
+:10A99000D06E9932ED3235CFC1A4BF106A5F5B58DB
+:10A9A0001FF18F53278B681FBA67C9448FE9CCB951
+:10A9B0001CDF1B847A1F3223CE43173A0FB95C3B4E
+:10A9C0000FB942330FA1C11440BBB0A502E601F597
+:10A9D0004F5BF369BCE17453E7F3FD42CECFE1F383
+:10A9E00064CA7E927A7EA0CC5E741CC755A173B7F0
+:10A9F000E2B85EFAAC3A0E2F929CCBEA257C3F3E41
+:10AA000098CFD3FA75F2258ADF13F8FED7ED069AB0
+:10AA1000DF2BB3F9781E35F8D3E96087E44FC27DA8
+:10AA2000DFD1F8F84F0ABD837CEC66B8BE5A62DC11
+:10AA30009C8FED03B666E4E3E881846D34AFC08893
+:10AA4000F409E7E7707A0DE05D09E447FB44C4FFD1
+:10AA500057D157A56BF83E98CA2FEE597695DE0E62
+:10AA60009A67204DB34F082DC823ED8F6F87F6E40A
+:10AA700090FD3483C34376B63ECE9985F1E6962F9A
+:10AA8000C511CF4DCAB3F87A6FB64590FDDD62E3CC
+:10AA9000F677B76D81C66F2A073F0AF791C558D67A
+:10AAA00089EB4A8C5A41713431112D2F620BAD5D07
+:10AAB0001BB590DBB576D755CF4F49FDA2E65EB505
+:10AAC00061766DCC026ED7DA0C64D7EEB31A961F9E
+:10AAD0001841EE0C16723BBD1BE73182DF08FE22E7
+:10AAE000C533557FD160F792DFA7CE7350E177B5BC
+:10AAF000BED15ECF30BE261A9C32DAB1A272BE152C
+:10AB0000F39AB342EC02B5FFCBCAFECEDBC5FC3CE8
+:10AB1000849ADF5EFC2BA17E24BCE7CC52ED92919F
+:10AB2000F9EE1FE01B92132E8BC18D7687CBE2A02E
+:10AB30003CF0D1BEC32DEC73314139E3FC325F24CC
+:10AB40007D243929AFBF53DFFFDCAFD01F7CC94262
+:10AB50007AA7D39A52166A9783D14AF9C9E0FFFAC5
+:10AB6000B2A0B1A37F8315A90BFABDE087DD302B1E
+:10AB7000645FF254C359DA070AB757C3E30A43EBD9
+:10AB8000DD76389D8FC79F84EB5768284844BE0AFE
+:10AB90005FEFEA33D531FDBA3530AED4A41C7AAAC2
+:10ABA000EF1F67E2BC91EE4F5B3D4407AEA7274124
+:10ABB000675122E9E7D538EE8FB6BE91E094F19C5B
+:10ABC000ED45D2D397EA0BA27620BF67C5907C4DA6
+:10ABD00051CE8FA9E349B9AD3B3AC682797C039344
+:10ABE00030FFCDDFE4B9AE5C4F7E867BA4F13E3012
+:10ABF0004B89C305C6B2D0FB81E4B8BEF91301EF9F
+:10AC0000B245E794697DD949FFA972A0548A2EB74D
+:10AC1000039FA73631A745C6AB93ED14174BBD2252
+:10AC200012BFA5F6F0FB9DC7C60D0878FFD0503FB8
+:10AC30004A9E93BABFF2497D39ADCFD444C6FA28B3
+:10AC40007EE9A17D884FE2024B707D7FF2301F517B
+:10AC5000EA13DA72D0B914B75EB735C22F43D363A3
+:10AC6000EF85F1E178BE27B094741C474FFA0E8C43
+:10AC7000FBFC2492E23E624706C56D6E4BF2DE4558
+:10AC800078F5CB77E9C62B93857A75DF8AA0FB042C
+:10AC9000F6097DF3299FE24E1D7B7284B8D4BFCEA6
+:10ACA000E2EBFCBBB3F83A4B75E4737A3B72AF5BF3
+:10ACB000137BEDEBE914CA6D18C7AE283FEDD3A99D
+:10ACC0007961BBF523F3152BE27EEA903C56F067E1
+:10ACD000422F08F8451414BBEFC8D34F3F9DC0F86E
+:10ACE00011C3717C3F3274DF3822C34F85114E3758
+:10ACF000C91FC1EEE672D65EEFF0017FEFF8421C8D
+:10AD0000B1FFD715FA35A7DEE5C0FAE5B2939EDDAF
+:10AD1000A9F9676A007F168B811943E4B0CA27E15D
+:10AD20007ABEC13AEEAA7EBC01E4B17C953883417B
+:10AD3000C9FFDA7E6AA609EF0FDD6E71F5A1FDB5D8
+:10AD4000DD12E7A238BC05E446485CCA627999F88E
+:10AD5000D0E2E4F13A0BCA5F8C4BE1FCB371FC2FFB
+:10AD6000D3FCD57ACF2A72C8E20CD07EA9D9B98794
+:10AD7000EA99240F9D9F33C531CA6730D9F9BDA325
+:10AD800011193A661A411E1F9EC5FDC0EDD9AEBE0F
+:10AD9000321A9F84C7AAD87687CB41FA10F10CDF0C
+:10ADA000F758F3A342F1F39E220F5ABAF9FC3C8DF7
+:10ADB00049F6723C6753ECF9AF5979D8CE6A13DE85
+:10ADC00073275A73AFDACE8561ED3C92501E4BED7E
+:10ADD000BC87ED8856971DDBD12BF7A786E3F933A7
+:10ADE00085DE7F6F3C0D3048793C8417224C404310
+:10ADF00097F0A705E362B1237DC7E562BAE2BF80A1
+:10AE00005CD417C1BCEAB2DF7D99AF31EEB7C4CCD8
+:10AE1000E779429780B3F1DEAAF0FC8B703B46D510
+:10AE20003FAA3E8276446CE751B4632606D7911A56
+:10AE3000CF49AEF5F0F512E7217E01BB46C6F522FB
+:10AE40002A797EE1F3B9A188E35FB015C8A82FCABB
+:10AE50003FEF4FC6EF4E5ACF25733B56BBCF7CFA20
+:10AE6000B3C3662CFFA4B6ECAAF68ABAAF3CDA7E6E
+:10AE7000B2ED5F3EDC126AAF8CB6BFFC55FBCAA7D1
+:10AE80006C068ADFED17B4E7E32B8AB8FC7317A9C9
+:10AE90007119EF8C228C430A1E273FF0CCE3339FBD
+:10AEA000157B0B914E69ED06E603BA9EFC2CDFE1A3
+:10AEB0000D69E75AF1ACC6E1C728F6D418CB610199
+:10AEC000D7E9985ABF8071F4E4DA4EC17D957AB122
+:10AED000455C8FABF5F54AFB25D28088FAAAC4CE33
+:10AEE000F562F2A0C4B242E48EAD88AF5FBD62BF2E
+:10AEF000DB4E3D65C6F64EE93CED99A81F6C3AF96C
+:10AF0000C990F5AEBFCD652A0B995F0BEE0F8D4052
+:10AF1000C74D45AA1E0C90FE56F5AD5ED513719235
+:10AF2000464F6C8EE47CACDA3B9B0BB93FB4399254
+:10AF3000FBE5AF3ABCEB11FF1F177EB868BC8CE78E
+:10AF4000643B0DB89FFE55FB2443F68DCE5FA3FAFC
+:10AF500033C8FF4EC9FEF37EF83EE7FBA564EFE57C
+:10AF6000E18D23226ECD72FB0FECA93B8BE2F9D56C
+:10AF7000FCA1F46661F70B8E361F2FDE6B9A87F10A
+:10AF8000BF3E8ACFDEFFB930E27988AE22D52E1AD5
+:10AF9000DA0FD4C4599315FD96AC94CB18674DC7FE
+:10AFA000FD2D6D1C747AAF16CEEBD3C233CE84C5A3
+:10AFB000557DEEDFE0793FCC1FC046F7C13A4339FB
+:10AFC000B146D9F74CF1F94BF19C782AEBA4FDC5B9
+:10AFD000E4DA180D5E8B4525EF02AF3956C7093FFD
+:10AFE000C952E579FCFED921FAFB9826BFBF7CCD7A
+:10AFF0005D782526DBC3CFF999A073C4D7FAF94B46
+:10B000002B90AEC3E2B5F5DA386D726839E061DDD8
+:10B010003EED79418F3B87FC8165DFD09E1B54F369
+:10B02000D271BEC9AEE1FD7F75BFF02F6678FF6AB1
+:10B03000BB8F82FC21F9AADC279C8A45D88E14108C
+:10B04000709F7B4C3DA37B8593B732F748FB057F10
+:10B0500054F0158E67E62B21FCCD51DE8DB1F07CCE
+:10B06000D5315B75640F8E01B9407F6F6023C800D6
+:10B07000809337CA644F2EAED531D40FECF326CD72
+:10B08000F7305C8AA7AA747FD4C2F37153EB985F40
+:10B0900087F3A9BF8ED6138D6B5C901F005F9A7BE0
+:10B0A00005161768CFEBA6869DD355F92039ECBD60
+:10B0B000AFC8AE5917A0E7FE58447CC2F5DF04D4F0
+:10B0C0007F30A48F669E398CF975C5DB18BFD726F3
+:10B0D0003A82DF6B13DC8F10AF00BF9E32CDC942C6
+:10B0E0007B65973D4287790F27A3FB1F63D18C5D5A
+:10B0F0002C62BEF222BCEF7060B200F017275AF744
+:10B10000B7CF8672F3C00F30986CD9BDEB9679A992
+:10B1100041D8F6C0F70866054CC67B8130E714D7E6
+:10B120005D847DC111BCEF3A22DB42C1C908A6BDD6
+:10B130007FA7B550DE8D7923AD1374CA39E99072BB
+:10B1400098C786D9EAB97F37E5DFB1793C0F20B4DB
+:10B150007DCCCF1EB5FD05D07EEED768DFC4C79F7E
+:10B1600080AF40CF24E0F8310E8EED237D3168149E
+:10B17000DABFD29EC47C0770FF06FAB308BC3F3B1F
+:10B18000E6A524306D1EC2507F76E86FCAFFC17CF1
+:10B19000960FA787FE6AF458F1F5E8D1AA73D37821
+:10B1A0007D532DE407E13D56785F9D59E9CFACDC36
+:10B1B000DB85786DCD0FE215EC406A17AA375F5139
+:10B1C000F08C7986097603E17934BC9DB2F3BCA892
+:10B1D0009DF6087F73FAFF077A3938BD42FB437B3F
+:10B1E000F29AFB5B01FDC55D7B7F885F5C3F43F8A6
+:10B1F000059A6C4BB876FCC2A87CD782DF53D0AEE0
+:10B200002E04AFC1FCA347ECE81798F51E13E663C4
+:10B210007E6B7634C9EBECB8A526CA47885F4AF93D
+:10B22000C56DD916CA876FCBF886491FA2A7DBB2B6
+:10B23000ABA91CEA53DE54762002C3146C0AEBA3BC
+:10B2400038C0CEA27207FA85BE7A9E87A5E625A9E8
+:10B25000FA9029FB9F342FF8306AF6F18153507F22
+:10B26000677D2EE59D4545FF95F2AD76D53A9D5813
+:10B27000FE9899EF637E57D9C74246A578DAD4C2C3
+:10B2800027703FD735A141A0FDCB8D57DFBF745D3F
+:10B29000EC2BC3BC2D56C3F3B21CD552983ED4AE92
+:10B2A000DB5D88579E3FE517387E35ED3D3B3B9E85
+:10B2B000F0B633E320C3BF3BF41CB4256AD7970E26
+:10B2C000F398C2D7A36470D33D63AC4147E348C64B
+:10B2D000D4005071AE290B1D35F03E65AD44F7F931
+:10B2E0002666DF4BF94C60E593BD919DFDCB328422
+:10B2F00087CD738D761EE1F30A1FB77ACFB14A2F3F
+:10B30000D7456724FA57AE094B29DF8C7ED4F52E3A
+:10B3100086CD07EC61739C8EEE838BC8089917D39A
+:10B32000D453FCB77F2EFC18E82A5A47E1FB62FF92
+:10B330008F9F1B3232A7C940DFA9E76CF87EDB186C
+:10B340005C3B48F734C6F3BEC3BFCFE7DF3307DF4C
+:10B350007F334630139EB3113644501CD368041813
+:10B36000CFE128F78D3DAAC4DB9A052625B942FB1B
+:10B370000B50DEBC68BA2103FD8653A665763ADF22
+:10B38000A6F851FA680FE52DB2AC188D3F7A4A390C
+:10B39000A7D6705B7A22C6EFA2A0AC0FFD6AC9697E
+:10B3A000427AAB7113DBF8FE6FA21E3F3B5BBFCA54
+:10B3B000847A1B9DE042C62EBF70653FDE33ACAE83
+:10B3C0004FE320BFAF630896EA292FC43898A679C7
+:10B3D0001F50FC301576C749E5141F2A9609CFA5E2
+:10B3E000CCDE8ADF95027234F70328F77F0C6F3FBB
+:10B3F00045F33E00FE75E8BEC0E8ED476AEE193041
+:10B4000082BF3372FB9961EDDB476C3FD86EACA60F
+:10B41000DD3689CB0D5F5C847FA4F81EE6FF17C77D
+:10B420008F9EB79655ACE4DB9B40A2E13E94C23FB1
+:10B430003B1CF594C72646F07D533D8811E4A71EBA
+:10B440006B2DCFBF48D1E6B1A9F78BB4E1BD215038
+:10B450005E66D1DAEBA56CA0679A807EAAD65E2FD5
+:10B4600046498AFB532CDC8EAFA77D527D8A562E2F
+:10B47000F4E07A81F9E8ACB97D94F7166FA1BC8647
+:10B48000D1E20B6F3531CAC7D2477AEA51E7959EB0
+:10B490004C1ADB56007014E7B3C527A7AEC2B8D16B
+:10B4A0005B0A3FB7811CA073A40D8907C49076ABDB
+:10B4B0000D8109A857AA75FC1C00FD40FF6FC58FC0
+:10B4C000A1386B78BFEAFD312ABCB25E989D11327B
+:10B4D000BFB794F531D4DF1DC907D0AE1DEACF1830
+:10B4E000C8A3FE86F28A94FE12FEBEFEFEA0AC6FDA
+:10B4F000B5BF957769E7B7D2D047F35BA9DC5BAA04
+:10B50000F6F7079C5FFADFD19F920F36D4DFB7B40E
+:10B51000F35B69ECA3F9AD1CF22F95FE12FEBEFEA3
+:10B52000D47C07A3B1BE16F969B4BC0735DFA1D03E
+:10B5300091AAC97700CF6661A9C4D88302E78BEFCF
+:10B5400014CFFA1EF2C5E5850D4EB253147F8FCE8F
+:10B550000789743E88F4E8E2146E87A8ED1F692A13
+:10B5600060EE893C1E84CFAC2281CE1F4C2A10DCB9
+:10B57000B8CFB60FE407DE83B71FD63996FB9B1C06
+:10B58000F43CD824D3F310F8976E8A7F39090E144F
+:10B59000737FF1C1247BD51AB43F4A2378FE75D15D
+:10B5A0002CB06C83FE1BAC975366CC73BC89E5E072
+:10B5B00039B4CC0E8ECFB8F204BAF73E22E7745FEE
+:10B5C00013C03B0A4419F3CA77C823C7737E5ECC05
+:10B5D000E3443B94BC491F9E9724A502FE24CC7FE4
+:10B5E00095422A262EA4F3368BBF154DF64DF5371E
+:10B5F000FAAD7618C72D42CE6F32001F7F54EC9BF8
+:10B6000055690B481E84FBA771A8A972319F50F49D
+:10B61000FBE1D765D665E4DF2EBB91B118F87E312A
+:10B620007E077AEA578A7DF45ABF91A1FFE72BE79C
+:10B63000FBD7B7DCABF54B1F3407EC68173E98130C
+:10B64000C7901ED55BB5E53B0C7CBD2D0BF35317A6
+:10B6500087E5FDA8F720EEC05F6732D655ACDCFF6A
+:10B66000A2E4FDDC85721EE338293194E4AD9ED35B
+:10B67000341AD988FB926A7BBF53E4168B73131E6E
+:10B68000D43C39263E9383DFABFDA9DF3D2A3C93B2
+:10B6900074B5B829D88167FBB3B8BE477BFD3F8A34
+:10B6A000B5F94997178EFB4E391B896F07248C53C8
+:10B6B000A8E3FFDFE2D71DC57CBEBF9AF3492E3F4A
+:10B6C0006797C242CFD7A9F95FCB866089EE15563E
+:10B6D000F3FF9863201BE9FD9FB3239DF711FF291A
+:10B6E000F648E04DDD95C8AFDFDED0381CEE54CD16
+:10B6F000F955A5BDD1F03CDABD13F413921FD9D290
+:10B70000EC74D079BA78BECF3626AEEC3C9EDFC260
+:10B71000F27735FCA53DA7D5D2FD94807ECB63782A
+:10B72000BE4D1FEC17E3C06D166CD7CFE34A81A75F
+:10B7300028FE9B521B105AB383E781C2E562CA46BA
+:10B74000ED79B3F0FB142B2DFD922063BC7F80CEEE
+:10B7500031CE2FE1F4A23B3BB05E3CB727C5641D60
+:10B76000CF17192B73FB3263202D74BF636A899244
+:10B77000671AF9C65619446F46C943AB306FAA32EF
+:10B78000EA8DADE9288A4BF6AEC23CA9CAE4373E41
+:10B790004907793BA9E4610E4F7EE39371004F2E78
+:10B7A000F9570ECF6284A42925DF5D85FBAA534B90
+:10B7B00094FB95581F9DDB4E4CE27CF4F73E45A36D
+:10B7C0006EC47539A3448D5B323AA7ED39F18B33E2
+:10B7D00028A73C6A9CD7ADDDDF64CAFD8937A8EC99
+:10B7E0001567237B6901FE0EF8BC41B97747670AEC
+:10B7F000105E2706EF3579F8EBDCBB133C27CFEF63
+:10B80000116A69645EEDFD886E85FF79DE903A1EEF
+:10B81000B5FF61E3C2FB016342C7B58FDA51C7F5DB
+:10B82000718ED1274C0BEED7AAE3FA5818D88F4166
+:10B830008F033D7D3548D78FAD0369F8774E60990A
+:10B8400079098E1FD82F3843603DA7E3CA921F9114
+:10B850003D559CE45E5982F97B067E7F41BB624781
+:10B86000EE8AF7FAD0AF077EA3BC4D5F2A3FC750E0
+:10B870009EABFD7B6CEB4BB85DFA27E55961DC5361
+:10B88000FF7A2EDEA72EB066A8BFF9F3CB06F4FB35
+:10B890002B4FF0BFD7BAE9F83B06F4DF37210CEDA8
+:10B8A0006CDA6718F1EFC17D888709F8FAD5F82BB3
+:10B8B0002FA566B6C5C17836ADE1F76437FC34BA5A
+:10B8C00002E1861A9A255B5174B4023F5BE9E96E86
+:10B8D000C3E72AD6FF12EE4B5479B57EC4376BB559
+:10B8E00076FFCA7AADBDBE6A0F5007F4DAAAC6E485
+:10B8F000B0FBFCF83D81550A3DAB1CBBFBF0FE8163
+:10B900002A16764FA08FC791BEC967004F6D7CA4E1
+:10B9100012FFAE14CE63A34871DE9752B74B78FE88
+:10B920006D733DBF9FACA2EBA281CAA11EEE2B2579
+:10B930008CE1F7E1A9F253D5EFDF7CE1801EE3054E
+:10B94000E1F705AE5A3E8FEE055F2E6FE0FA7DEC13
+:10B950006F2B62E07DF83D80D55D5CBF57370A7E76
+:10B96000BC77F79BB55A7F6025EB6B437F6665BD5F
+:10B97000F6FDAA462D7CA444D1BF93D9645C1FCFA9
+:10B98000960812AD1705BE90FADBD702C83F499E54
+:10B990004EE4B78D86C054D473E5495E82D5727883
+:10B9A000BF89EB21AEFF75B09248FEEA79DCC25741
+:10B9B000C7EF67FBE6307B20C45E1087C3EFA9F2B8
+:10B9C000D3ECD94A7ED80B02FD7DF072C92DC58417
+:10B9D000F8C9E17CF8BE223F5F63FDD938AE4C6404
+:10B9E0003AA04BE632FEF79F335FACA1BCCACCE96C
+:10B9F000825347EB58C71AF15E3190172817D0FED3
+:10BA0000C4FB3232C5CEE524A7A719ECFCDE1D0726
+:10BA10000B5DFFEEA79880F9823874DAC74DE9A56F
+:10BA20007B371675ECBE88722E63BCDBF5208C6FFD
+:10BA30009772AFF6AE9F0A64CF6ECA7E99E4612218
+:10BA4000B005F6BBC9A1C8C52EED7D188928A7F0A1
+:10BA500000CBC26CEA3749DD7F50F37A036574BFCF
+:10BA600054A2D2EF971532FF7B7B1B3A059C772AB5
+:10BA7000F335631CEAD7280BE3834F759FE0C6E0DC
+:10BA80003EF97AA4679DA39FEE8751F7C947A8B7EF
+:10BA9000A5247E78BDD1E4EFFFF5F37F007E0B583F
+:10BAA000CA008000000000001F8B0800000000009A
+:10BAB000000BED5A7B7054559AFF4EF7ED4E7712FE
+:10BAC0004227813C0C819BD72C90109B8420E8EE70
+:10BAD00078BB3BC984D7D8E1310642A49909BB5150
+:10BAE00092741474A3656D1A616207DD2AA1D045B2
+:10BAF000CB3F1A4A5CA756778366B1D186ED80A109
+:10BB000050519B151D184B2AB0AC23C50089382E07
+:10BB1000CEB0C37EDF39F7D27D3B378A535356ED23
+:10BB2000EC26953A39F73CEE39DFFBFB7D171430F4
+:10BB3000C15C80071C002003D499AF650C5760FFDF
+:10BB400040492E607B9D7EEE1CDB9A6D26906DC079
+:10BB50007FAEE39FC5910AF2F4787FD1F46C5D7FEC
+:10BB600089B34037FFAE7925BAF146A55C37BEAC44
+:10BB7000A15AD75FE1BD4337FFEE268FAE9F92B744
+:10BB80005037DF2E2FD5F5D3A6AFD2CD9FE0FCA93D
+:10BB90006E1C26F5E7792700586D81611FD221C8F8
+:10BBA00000E665E1BED6F4209B08509E8193B14D1E
+:10BBB000ADB6A7531B9C9D126519D8DE925149FD65
+:10BBC00094B71FCC8BE236B6892FDB5CD8FE130B03
+:10BBD000B9B3710F2493AF1FE938F351504209F400
+:10BBE000FC3B8F09A026DECE517C77BAB0AD7849F8
+:10BBF0002E408EE04F6CA67716AE4FC57FE7E0DF94
+:10BC00003E5B684F11C0ADB827CC8FEF03F5AEF99E
+:10BC10000AAD7B54590093B01F064719CEDB6D0562
+:10BC200085FA817D56BEAE223C6C52D2E3EB86147F
+:10BC3000C6DFFBB4D7BD80F6EF8C3007E0BCCE9DED
+:10BC400067AD7205F50733146C2BBD67AD909EF898
+:10BC5000FC8C959E774A23A90E6CFFA5DFDC103281
+:10BC6000909307152BDFFF4821B6788E9607CDA15C
+:10BC7000143A3B288B5D286F4D20E4AD65EF48D426
+:10BC80008CEF6FE960CE003E6A92EF5B0C4857F094
+:10BC900059CE0E23C96DF87BBD18CF999FB11B6E8D
+:10BCA000E5EB017200D608D6C1AA79510BD1ABB928
+:10BCB0004DCCD7F8B96679FD795689FB76253D9F3D
+:10BCC000D23B6ACEA0F5D2D9614D1EF0DE3F53269D
+:10BCD0004CFA2C0D3BE55071BD04E0A4D76478AF5D
+:10BCE000CD1E0960328EFB3C9CDE4F23DDCC8CE800
+:10BCF000984C2741BF6FA3CF2BC4EB043E25CF0B3D
+:10BD00007A049F5E61D0D49F3E76FC5DE2239E67FD
+:10BD1000378B558119C0EF4DE572DA6C5BBBFE5C69
+:10BD200035D1FFAB5E46F4FF570629B8FF27836F76
+:10BD3000E7C824E77B877286713F7FFF500EA09C87
+:10BD4000B55BE44DD2242E07CE4DC897CE70949F9C
+:10BD5000BFA3BF7A909E778499D38E47F50F8CD678
+:10BD6000F37BC270AF239DDE6B7CAE6D8A899FEB47
+:10BD70007945E6E7F7FBF09D93687D4A28C488EF94
+:10BD8000C3562E17FB193C85FDDD7DB6A690C13E3E
+:10BD90007F4FF4C6F56FF55941423969C7F5748F85
+:10BDA000238547AC36929BBD782F46F738BE228D4F
+:10BDB000F6DF680199C5CF77B130769AEE7FAAD5C4
+:10BDC00002017CBEB9D5CCE97D6AA399EF635EF729
+:10BDD0009FBD05D85F89F29782473DDC7AE548012F
+:10BDE000EE7BAA0DFB785FCF3A0BD7BF95F7333EBA
+:10BDF0003F597E35797D4E95CF953EBDBC25CBEB29
+:10BE000018396DFB6E721A8ECB69E57533E77B5D71
+:10BE10002EC9CFC3E0DC43FA73EDB02517CF5BDC4E
+:10BE2000EB703E86FD59E6D0CF73C82E1C16E3B3E7
+:10BE3000DB7731615FE45574AF82A015B63292238F
+:10BE4000C1AF77895F93E96A232C8DF4558A1593E6
+:10BE50001DC2572BC4E7572DD0B4B7829E0BFB32BF
+:10BE6000EBF5BC5D5B13E4F611551E35BB576E0553
+:10BE7000DFDE749ADF7F4B23EEF30AAEA7E753D5DC
+:10BE8000FDCA4A46EA1BB1BDA0083BF8917A0EAD47
+:10BE9000FF0F1EB11FB4A396211D97D804DD17769E
+:10BEA0004757D33DE64EF17D42F66FF1D48FDB016B
+:10BEB000ED44B0F89D0A1F9D0F9C269AEF57E97E2E
+:10BEC00078FEAF9FDF80F7B5CF48E57C6D3CF46C22
+:10BED0008CF8DC592A01F1DD5E3627D767207F5ABE
+:10BEE000EBBF5A04BEEC78BF33325AAF18E8F57690
+:10BEF000F5BCB3ACE2FE104122E5737B2CCDAB8ADE
+:10BF0000CFD3EE0FF018BFA7BDEC05CEA70DF7C33A
+:10BF10006C333FF136BE4F73FB71B616F7B9DBA237
+:10BF200058D291CE1F4F6C5A7FAE0CE09D1E3491BB
+:10BF30007891633D36F0FD05C0FB3D0EDE8FF5E4E4
+:10BF4000F1FEBFF7C8BC9D31D5FB0705F759F15687
+:10BF50005719D1EB70E1335E37BEE7F2310BA7031F
+:10BF6000809BD369832A7B572266B0E1F89501163E
+:10BF700002163FFF3D570BC087F6E457F43E5CD8EE
+:10BF8000D1FD21B773CEB6D17A399DE4EA4C2FF5B5
+:10BF9000FDDDBFADA7B8E134FA09922F7F98411EAD
+:10BFA000EEB3FA6A365FDF113E6E95490E4C23F50B
+:10BFB00044FFC041062497FEAE516E3F9FC77B29C8
+:10BFC00078EE1FBA32F9FDFD91D926C1CF39224E44
+:10BFD00051F93F38F3771964BF6CDDF20777101F12
+:10BFE0008F9A391FB7BA47321C067C3989FB428ABF
+:10BFF000383FB5C9E34DD6409913D735A9729B3C5C
+:10C000007EBB4BC82552D8427102FD30A4DB6A5575
+:10C01000BE5AF02A13315E581D66D154D4DB96887F
+:10C02000E7BC446D1783B33A7B007056D367F3F8CF
+:10C03000F276B36D27ED5716EFAFF4E1A609714E16
+:10C04000735B1A39D184F707F83D520A4B737DDFD1
+:10C0500010DFF987315E437E75622024A3DC775CB4
+:10C060002DE7EDA5FD8FCBA427B6D49167C82FC0CF
+:10C070000F4C8E3DC8DF8E803EBE2953F5A0CC23E9
+:10C08000E8B6D4C5A4CFA673BB554EF7AECDF7AD79
+:10C0900070E1F3DF147E9C7188D4DB1AAD04E3E712
+:10C0A0009D80FED846FA84EF2D47FEBC6A70EE995B
+:10C0B0001EF72A8A9FA6C2535CBE01E59BE42AF9BB
+:10C0C0009EEB5CE25C9A3EAF3C74DE4AF1AE3F6CA4
+:10C0D000ACCF351ED73A3A4F1F4083919F2B57FD67
+:10C0E00073C74EC6E9E5DF99CDE97411767ADD288C
+:10C0F0009717F11CBB512E2F7BBD6999B8FEB2CFAB
+:10C100009B96951ED7FFCE9D697C5D5FE9D2ECB50D
+:10C11000D87F4495FB4B618F8DE87CCF4EA177DAB9
+:10C12000FB4E47576693FED45846AC4E1C9F1239BF
+:10C130009341715DCDFE65D9A47FE39DF33EB7B811
+:10C140007747F786F5E7B2853C98519FD6AB7ECC12
+:10C15000FF58D44AF45FDF0D5C7E07F77DD249FAC1
+:10C160007B2992E620BF77F1405A80ECFDE58329D8
+:10C1700021136ED54EF28EF6ECA265F8C73C7EDC3C
+:10C180006F7604709EFFE08567481FFDFB501B71B2
+:10C19000DFF591C747C9BFB547169C97A87DF9FB46
+:10C1A000D5878EEE87F87DB5FE851E9B4CF6F39203
+:10C1B00024ECC4FAF06B3C9E5D7FED4AA5B782EE9D
+:10C1C000F9FBB964CFFCFF76652ED931FF9B57E6AA
+:10C1D000D2B8FFF5B42EA3F8E4798F99D355F38F35
+:10C1E00045272425715E9DAA07455B9E6A2846FA6D
+:10C1F000D51C5FEE34CB09F25566F2D2FC9A8F6AF9
+:10C20000B3D725ACDB12931AE8F99CE3B569AD0905
+:10C210007279BBC7A2DA21D46AB43F2B551AAECCCF
+:10C220007B3266AEA4BE1450E308769DC7DB204B7C
+:10C23000C8E766FA0F55B12F26F17826D0660E951D
+:10C24000E17873CCA4D82B691CD725C41900DE452E
+:10C25000B388DFF74E766E95B9BF871EEA3F5C164E
+:10C26000227F0F01DB5069421CB432668AA6A0DC33
+:10C27000344552A2140FAD8C4967785F8D8F4E3BC9
+:10C280005EFD7931F0F8E85C629C83F1D0397DBCC9
+:10C290000413E8BC5ABCF431C55518CFB66C8C5A9F
+:10C2A000C85F619CA49BBFA6E947E7290F5BD3AD9C
+:10C2B0007F5E14934C4BF09E4568EE880C7DB11D5B
+:10C2C00036D20F2DCE247E0D18E8FB4FDD429F3570
+:10C2D0003DDA1233713E6C89B96DA5D836ABE303F4
+:10C2E0000E130470FF2D91657B186EB6E5DADD69DB
+:10C2F00044AF2D2796C263A4EF0EB7AD8CD65DFB7D
+:10C30000916D45455C3EC6D80FB7B08FF178C0D867
+:10C31000CF4D51DFFB7DF9BB3CF79F87BFC3BC7A94
+:10C320009A7B32CFAB9B293ED4F2EA643FA1D95F1E
+:10C330006DDFBB547A8FB5BFE779FC82F92FB7BFA9
+:10C3400077B9653E6F4AA4319BE7C5279667CBE96D
+:10C3500063F72F919CA6AC8AB1FB6BF19A3FA00CBE
+:10C36000D9288F51CC5C3FFDCB598851DFCB789CCD
+:10C37000ED5F6D09D1B8769ED872C6E7AD70B29008
+:10C380009DC5E33F2D3EBC313E07C78BE2F1A216AF
+:10C3900017C6BC8CE741CB150B1F9F31D557EFAEAD
+:10C3A000A1FBD9F9F39AF9625FB40343941FDDFD51
+:10C3B0001306DC0EA8F1A2269FC9F1E41791928919
+:10C3C000DF841B3DAFCAA5A65F5393F442F3538F9E
+:10C3D000B8047D3AC94F57939FFEDA4A7A305EDC43
+:10C3E0008D7E7A959BAF03BE7ECE4792D728EFBE57
+:10C3F000A8FAFFFB886FD84E89BDE5A2F316426C00
+:10C4000013E58BE3F9CF856A1C33DEF8232E91AF59
+:10C410007C9B1E3FADDEEFFBD2E36D6E71AEFFED98
+:10C420007A7C23FEB31ADF73A6C7F51CC96FAAB9BD
+:10C430002BE622BD7B17F54E1E3BEF2E2D9F944021
+:10C44000C79FA142AB89F21E7F9BC0018299F20770
+:10C450003C3F79DB0CB4CFFAABF93C4EBBEF6A261C
+:10C460006F83F920FCE883451CB7B9EFA5E31605F7
+:10C47000D7376F64B3090F6A6ED3DF273859E138B5
+:10C480005BE000E3F17230BFFF08E955604F894C73
+:10C49000FBB7D065090F69CB0C6D26FC82709C5BE5
+:10C4A000E9796A9C0EF89E0EF5F91D2ABE034971C2
+:10C4B000C09B83A738DEE31F6040FA6B8DA0FD2090
+:10C4C0007B7254E01D9D1161173EEFB6737BF2B98C
+:10C4D00024EEE1EF66A14D2C1E479C8F6CCB213DD5
+:10C4E0001B134F28184FE4C4E3898E173EE2F63041
+:10C4F000397EC81A10EFF1B79B4384C70C15CE657F
+:10C50000D4EFC07C3097E24459BEAB409C0B42DC78
+:10C51000AE283A9C64F72DC2EF7F71F43F781ED9A4
+:10C52000BC9F41368F3B9458694E3CEE58135CC813
+:10C53000FDBF1667AC997664A880F653E30C07FE3E
+:10C54000127E981C6774868F5B282F18134F24C5A2
+:10C55000119FB9F5B8E03449E0ACD322CC4178D290
+:10C5600034959EB7F5A5F2B8B8FED3D66CD2738DCC
+:10C570003F971A05BF2E9DFAD245EBE67E2A39C8B1
+:10C58000DEBE796AE38705A22FDB645AB7318DF2EC
+:10C59000904B9F3E9046F47C135B407D7DFDA464F0
+:10C5A000881F2E57ED11FAB7DF73FFF6A88A1B4BD1
+:10C5B000E8DF26C4F197E4751BD475414C3338EE9F
+:10C5C000B81FB8FC06F37D0B79FFD962D8C3711F81
+:10C5D00021AFAF45321D14EF95E365BBD14EFC731F
+:10C5E0002A6CB157913CFBDEE1FAF1AC89CB2FAE5E
+:10C5F0000F30EAEF95B9BF2BC7BFD538BFD28A67D6
+:10C60000A902F132D4B7992ADFF2310FFDCCC64529
+:10C6100068F975A453F994A35F131F2B5341A2FD2E
+:10C620009FB0F8B6CEC0254F0C4ACE4DB4467266C8
+:10C6300037E2BD9EB08BAD9ED88FF28AE742E9E625
+:10C64000E7EAAC387292D633D901AB717D675E7A76
+:10C6500094F033085B7E73432E510E18BDA752C869
+:10C660001BE5A30C14761DF9FB873A59D8859F78F2
+:10C6700081F2A0CDF3BA80F2CEDFD5811A07D902BC
+:10C68000E770FE0A5C31119FE7E6FB96505ED89199
+:10C69000376C1571C58895E28A55E47FB8BD15B829
+:10C6A0009D09E793BDDC3AFD552E6FCDF43C419FCB
+:10C6B0002111DF338FED3FEDD6F64B7EBF2CF2CE4E
+:10C6C000A4F7CFC9FC2287E72FFFFD5F19DC9F4548
+:10C6D000AE70BF73792405621CB71B163875C4C2CF
+:10C6E000F3F5CB98074D4EF067AFBB041D0E453CEC
+:10C6F0005C1E0762B56934FFB4FABCEFC4F2654B47
+:10C70000484E6292B38C9F52E4350331A946C40768
+:10C7100063E8F4D76E033AD952853D4F96CF1C5546
+:10C720003E733CE2DE9E53225FF16F14F50387AA4D
+:10C730006FFE2EC6EDCA91C21CA6E1C8B946F585AA
+:10C74000FD23DCCEB6DCCB9C0179FCFAC27635CF7A
+:10C7500048B6439DE1BD826FC9B86D433DB73B37D5
+:10C760008BDB0265C373E376FA7E8F6A5766091C1A
+:10C77000F7AADBC1EF9BD535DB950BF1FB1BD0F3A3
+:10C780008CC780EF06F3466A0DE86E306FB67273A1
+:10C79000F3FEE626E73D7893F39E566EEE1E176E87
+:10C7A00072DE4737F9DE5F18E92DFC1FAD8326D70F
+:10C7B0003993EBA2C9F5CE94B7D70568EC71F6E4CE
+:10C7C0004894A89BB1AF89A1CA4A992FD8484F165F
+:10C7D000CF177581BE5A5B68178BD747357A9DAAEC
+:10C7E00013F197A36234908D749EAAC46AB3519FCB
+:10C7F0002FCF079E3F5CB68BFA00488EFC46CE3F9B
+:10C8000047FE52B4FB41BB719DE94975BFF1EC098C
+:10C81000D4BB3E257D71505C6EC0C78D2A7EE70873
+:10C8200003C76D4092F397F2F7CAF9E46F26BE256D
+:10C830009E674441D9C5CF25172DE571B45C44E707
+:10C84000DBAED6BFB216FEA088F0BA2CF4BB541FE4
+:10C85000D94675129E0738F83CED7DADB5E27DDB1B
+:10C860002DC0A89E1598C1789C0AC31319C99F565C
+:10C87000DF3866899E5BCB787DE3AA07EFF79E29B8
+:10C880005AB1BB48F085E85B31E0E07597F7E7FF08
+:10C89000E3741F7F8FA8776C7088298729DFC073A6
+:10C8A0006C3850CDE5B7F9D0FC5FAEA6B8B054E215
+:10C8B000741E138FAB79D649354FD4F2AC61CA17C9
+:10C8C00013F28EF45AD378FE30DDC8DE6C67220F87
+:10C8D0000EBC27F2E06AABB3A42B814F79B5827FFF
+:10C8E0006BA3028FD5F2DB4A2564CA413A543F6CF0
+:10C8F0008EA6A0BFAEEE9D6525BB5DDD5B98CAF13F
+:10C90000A5D6BD268DDE467C2F56CFD9777484D729
+:10C91000275E4BAA53B6D65AF9F887AAFCB4D602BA
+:10C920006F3794499BC90D4FFC4B87D9081F6FC1C6
+:10C93000F89FCEB73628CEABD5435AA2B287DE7366
+:10C940006668A497DAAAB6220FC70FDB477BC97FB8
+:10C95000FAAF5D397227C703AC32C557C9FB5EA871
+:10C960001338E26B149010BD1648219A57BD40E26F
+:10C97000FCCE6AB1F37C3CCB02E674EA370A7F5600
+:10C98000D530C9437D589EC9FD71D55139735D4578
+:10C990003CDFCF5AB07132D1E9DBEA441A6E306322
+:10C9A000AAE2213E7ED73A51C7B11356BAF73DC32A
+:10C9B000FA3A9156F719AF4EA4D569FD0D5FEAEA30
+:10C9C000CA7E69A49EF095EA0367789DD81F668E9B
+:10C9D000BCA278FDC83F306AE5F455EB4638DF4A23
+:10C9E000EB067A44FD681FBE9FDA30DE57C173BC88
+:10C9F00081F7A53682F7A5E7077BA6F336DAE3E4ED
+:10CA0000EDA19E79BCAD46B1C9CFA2BAD328AF3B48
+:10CA1000DD5BCB248A53B5BA855697A8CDF7B613FC
+:10CA20009D12EA16BC9F5CB730A78A7CD47FD4E203
+:10CA3000DC8DCFFDC76CDCCEBA226BA7515CF6D57E
+:10CA400071DF3407AF0364F3BC5293874B8AD39EE4
+:10CA500049F980D769A77A41F5E079ABCCED4EB4BE
+:10CA600000F2087F8A5929EF273A283C9E73D9891A
+:10CA7000AEDF8AEF87FF1FDFFF2EF8FE485C2FB97D
+:10CA8000FDA8F29A945DD41E55ECEB12EC439F572F
+:10CA9000E0C47DA5C55CFF76788B335B13F1FC06A3
+:10CAA00091C7652D28B5273EAFA917787E1603AF2D
+:10CAB000911D7BA3D6345E1CF846AD615C645C17A7
+:10CAC000E86B107644C3FDC7D6099C6F9726E0FD3E
+:10CAD00097DE4339C5BC75707F0AF7E75F1D48D9FB
+:10CAE0004DF1775543EBB409D8AF3A990245C21FCF
+:10CAF000E9EA0BCD0D26C59E61544F500A4C28B76C
+:10CB000063EA060D266EDF6FD40D1AA433BCAFC6E0
+:10CB1000E9F78CFE7A421123FA87829467BCD6C16A
+:10CB20009C8330B68E801B17C03CBC45C3095E5742
+:10CB3000767631A72C7F7B7D2147C5193AC399664C
+:10CB400092F396B700E8BBADB17586061EEF57C1EC
+:10CB500053C15AFA1EABD4E4207F968C17909C9058
+:10CB6000FF4FC60947547F34A2FABB87D5F8BE4AA7
+:10CB70008D4BB475C9FCAF53FDD378B8634D9D8818
+:10CB800027B63454F511FF028B4D407E604B83DB9A
+:10CB9000569AB09FB94E7C47B39DEA169312EB1696
+:10CBA000A23E915CAFD0EC54F5E0D7F5C4FF1D1167
+:10CBB0008127F9F304BE597DD07594F43E7E4E7101
+:10CBC000BF1DC8E3188FA39C9920EE0536817B71A9
+:10CBD0009CA16AF19787D2887E5EF45764978E9500
+:10CBE0006E4E277BB258AA6132C7BB6FE0DF844F1D
+:10CBF0002DFBA06D2190FF5F31FB38D17DC56A0B05
+:10CC0000FF0E49F357CB3E68AA17E3BB1E4BA5F1B5
+:10CC1000E9CC6997E979839B9E2F7A394A481F2C82
+:10CC2000A1D3A1DEC48E9D93485F664CF595D4E1F7
+:10CC300079AB1B551C7CB5F0AF2B228D16481FEB32
+:10CC4000EF0E177EC5F3E82B916A8E6F6753FDB523
+:10CC500022EE2FAA0FA01F9AF0A7F34375750E4E70
+:10CC6000CF5BD10FD179B21A459D3099FF6695FF00
+:10CC7000E3F995F1EC28F911D33CA1372C2FEE7F85
+:10CC800065CAAF6F8BFB614718FBB9DF807BABF6E2
+:10CC900029739C38EC21557EC7FD7E23FCFDE0E026
+:10CCA0000FD4FD99E0E06A9EA3E1E15A5EF49E4A4A
+:10CCB00067AD7D5F6D93F1320D27CB5500BABF0193
+:10CCC00027CB251C2D8BCC7605C7EDF2D533DCC0E8
+:10CCD000CDA259A6EBE5384FC5ED34FC2CE79E7E7E
+:10CCE000467146210436917D19B2826BEF24FA6EAB
+:10CCF0008FC126D2EF50238F73869EFB55EF2FE80E
+:10CD00007BC301E620F7D3D17F9CFBE90E8C6B78C7
+:10CD10003C14B92070AA7EF1BD694798294638E8CD
+:10CD20006F55FF5CAB00B71B1DEA777DF50342AF83
+:10CD3000E338D14352224EE4976393B5EF0543C2E3
+:10CD40003F197ED7D70923FC7BC0CE36E68CE2F3B1
+:10CD500064DC28192F7A4AFD0E705CDC48F96EDF1E
+:10CD6000FBEDAB9B30E933025355FCF99447D88572
+:10CD7000261F63B4BFCDE46DE7DFFD1E640EA3EF95
+:10CD8000478FA972BF48C56F5FB40A7978F17616EC
+:10CD9000A2786E11089CF6C5836B397EFB62157311
+:10CDA0009AE89E2A5EBB50A5C78C385EBB83F0DA3A
+:10CDB0001FA33B219C7691CA7F80107F4FE3CED486
+:10CDC00028C51B4F58FAF3481FB5EF8D1EAD13FE53
+:10CDD0002E3505BA8CF4335CE77AB48ECF1B37BF9F
+:10CDE0003C596710EF14D58A7D4FD7E9BF2F4A8889
+:10CDF000D3CFD0BA84389DF793E3F43F155EFBB7E9
+:10CE0000E3E3C555C6F1DA98797B6E12B77BD68815
+:10CE10001E9B55FC2499BE4ABD6687A73838EE781C
+:10CE2000E3FC20EAB92AEE35A4FAB920937F79070A
+:10CE3000AF7F5978FD4BB333C10962FF89F5C2EF6B
+:10CE400068ED4C75FFA0C518A7A951E7FD305FC973
+:10CE5000A8C779E52FE971B359FD7ADCECD6709655
+:10CE6000AE3F3B7A8B6E7EF5D162DD784D6CA66E5F
+:10CE7000FCB69355BAFEFCE1DB75F3EFF8DCADEBE5
+:10CE8000FFD5881E37BBF3AA1E37D3E4DB8512918A
+:10CE9000B8CE63FB996E5E419BFE5E855DFA7B4D6D
+:10CEA000EBD6DF4BDBB728A0BF5F49507FBF2CC25A
+:10CEB000F52BFE785C7F6FADACE2FA25765AB7BDF4
+:10CEC000A1D44E714C6EBE90576DDEFF0085A782D7
+:10CED000721032000000000000000000000000009E
+:10CEE0001F8B080000000000000BE3146060F85185
+:10CEF0000FC1D3F9191836F323F8F4C0C7981918DD
+:10CF00008E83302303C33E20DE0AC46B80F83D03CA
+:10CF100003C352203D07882703711710BF048AD529
+:10CF2000B1623787858D81810D884F02CD3AC54C1E
+:10CF3000BCFD8A7C08F6215E0686B5407C9497BECF
+:10CF40006130D8F00C41FAD9F50C6AD76ED181F76F
+:10CF50003708B38A3330304A20F8FD12A8F26CE269
+:10CF60000876960C65769501F50300295128158001
+:10CF700003000000000000001F8B080000000000FC
+:10CF8000000BED7D09785445B670DDEE7B7B49BA28
+:10CF90003B9D9095257480202A4BCB1201113B219B
+:10CFA00089010306440928D26C2184249D01661E50
+:10CFB0003EFDFF6E0842C4D1898A1AFC195F83E0E6
+:10CFC00004079DE0A0139DC0348B8833E804C70597
+:10CFD00097795F401E204212A338E8F3C9AB73AAC9
+:10CFE0006EBAEB763769B7FFF97FFF840F8ABA55BF
+:10CFF000F7D4A9B3D5A953754F149D9124DD40C82A
+:10D0000025F8A1E5AB0A2124255876489DC3E58182
+:10D01000C1F6B55E1771190979C06BC272BD379D33
+:10D02000B8AEA0CF47EB8AFC1642EEF7DAF1F9E38F
+:10D03000DE122C1FF59662F988D78DFD1EF29663DD
+:10D04000F92B6F0D96F77A8BB0BDCEBB0AEB372A62
+:10D050000BD2605C425CA6AC64423C2F0F1CB981D1
+:10D06000D6D6678E4F9047D3FA5FF5449F45DF1BB6
+:10D070002D17F987D206B9A4286B74B09F8AE78D63
+:10D080004A5E5F80F3F8581DEB67AA792D3B72BFAB
+:10D090002C3286E2395646FC89A564727672C47ECB
+:10D0A0008301DE2343D93C89DDF9DAA0C8F0AE065E
+:10D0B000780F0DE5F825DB270F8A0CCF09FD7EE5FB
+:10D0C000E4F0D23B0F0F8CDC6F0CF4AB7372787D05
+:10D0D0007DA60191C71D0FFD62E013C589105F8B0E
+:10D0E000D19F9DF5FDF9455CF42FC5A763AF79EBA2
+:10D0F0000609F9370DE8B4D6BEFCCC163A4E7BCB08
+:10D1000030A7DE41C8672E6782DD1213DF6E81799A
+:10D11000C4C0B752182706BECD8D916F0BA05F0C0F
+:10D120007C5B02FD62E05B658C7CFBD94F846FF712
+:10D13000021EDF836F1B62D4B75FC5C8B78D31F2A3
+:10D140006D538CFAF6648C7C7B2A946FEA73B5DCA1
+:10D150004124B48B372A253BA09F27B3CD3620EB43
+:10D1600027C1BF3DDF53EFF6C7C8BF5763E4DF11E8
+:10D17000A04F0CFC3B1A23FFDE89917F1FC4A877C8
+:10D180006DB8CE58E4AFDA8610FCB93400FEB5D8DD
+:10D190004F5DCDEB7AC03B89908C7039504BCA51B2
+:10D1A000940799B8DBD9BA55F0CDA51C425698E83A
+:10D1B0007FE9FBBE3C12D0D3F17D36E2AF9584FE11
+:10D1C0009F039E84E47F732955E8EFD345EC4F74A9
+:10D1D000D0FE30C815E5FF66EF102CEBB91C6D2EA4
+:10D1E000D2A13CF8920D285F4F789DD8DEE01D8BD0
+:10D1F000E5635C2E3772397A00E4EE0A90C3522E52
+:10D20000574CEE0829719453BA76EC89271B1C28D9
+:10D21000576609F09499BCDDBBE7CAAD1B28FCCD6D
+:10D2200035BA2BB785C8D91345AA7C51C94C0EF61F
+:10D230007BA2FC846DC150A4B70DE03414EBD47E06
+:10D24000BED07E0DEEEE7EBDA0DF63C55CBE641277
+:10D25000081DF7B1D2EE7EE912A5CBBD12296DB241
+:10D2600084F3658AC4F4942A0AF243E6F4DD9F77D6
+:10D2700096B4D1F76DF6916984964F827EA2FE39FD
+:10D28000B054DFAFA77476537A641A494D13E04B5C
+:10D290005A2585E22B8F7524821C3D34CE45242BE4
+:10D2A00021FDA19D8EDF67741BC9A265E2F83622BD
+:10D2B0000D837EB49DD653787BC650DA4EE13C0494
+:10D2C000EDD6607B2A6F4F73F0F7AF63ED0F7B09EC
+:10D2D0008EAFF6BB8FF2D94DF15B47F1C5E7C5C400
+:10D2E000057494293BFD21F39F2DE971DE95BC5413
+:10D2F000F1BF2FFB54C6FCA1417CCD832F66CC0F20
+:10D30000C1EFBEC173B0AEE263BEA212EBFD57F532
+:10D31000A69E18D707124EE7D49903847687EC446B
+:10D320003FCD71444F7C945F0E2A9E91F8F3051512
+:10D33000E71F54FF5C8C1EDAF6BB3574589721D278
+:10D34000C1D05BA4C3BADE221D0C7D2E4F8729926B
+:10D3500003E147A3873AEE862BC571E3AE12C7DD22
+:10D360007095386EDCD53FCCB8EBFB89E31A33C53A
+:10D3700071D7678AE31AFB7FBF7189ECA40F99B953
+:10D38000200EF8679E60DF2E10F7C3A0DF60E7F481
+:10D39000C9413B27DB4B88DB12E42791E9CB39A15C
+:10D3A00070EE14EC2A85F37F381CD7E5E1D8357090
+:10D3B000E66AE16CE37048A89D0E8343EED0CEE3AD
+:10D3C000B7FCBD802E647CBABE92126BE87B4ECD5A
+:10D3D000F8B76BC7DF0D760CE6A1BBECF80E0D5D60
+:10D3E000E768F1D9C3E110DDE5E841EC1A38B3B5DF
+:10D3F000700E713801E9B2704AB5F3785DE5AB247F
+:10D40000AC5F941EC382EF75E4759E423FE845C54C
+:10D41000B19DB64B7FB2066EA0FD8F6C91FC465A53
+:10D420000FEC8DC7F5E3FCB6E958DF778D11D7898E
+:10D43000F3CEC97E23B527935E78DB06F6A5EA0511
+:10D44000BD0C75DDDE8F6D6D142F8FB1F5C1EBE86E
+:10D45000F3CE17F4642B4A63A10EE87E8ACB2659DB
+:10D46000C5EA656656ADDAB2EF4E805BDE6C2466C7
+:10D470000AA7EAA525D3AEA3F5258715025DAAB6AE
+:10D48000AF36F4A6F5A57EA909EA1D79A41CF469B6
+:10D49000CDDEFF6C87F5E8FC6E251BC63F4BD70938
+:10D4A00007B5C747ACADA933291E15FE5D85F05EF3
+:10D4B000C54EC9492D1CC577FBA10CC07787E43444
+:10D4C000527A2F6B8C270ED5DED1BFA776EB71FE7B
+:10D4D000CBE9FC0985B784D417023DAB803830BE58
+:10D4E000D3E8374B417D3BEB3D8CE3A9F5AA1D7496
+:10D4F0003CFA7EF5739213A65AAD236EC0B3FD2598
+:10D5000073E9531698E76AC3602BCC6FBD01FA2DFF
+:10D51000F1CF7FD1EC003CB7180A01DFCD5B0C6581
+:10D5200043817E645EC950C0EF2F227E0D7A17CCF6
+:10D5300077F935C6AD7AE0A72530688635DCCE9E12
+:10D54000A5EB952364FDAC20CCEE13D96F983E2C4F
+:10D55000F8FC257D22CAC1B2463D7184DA0D2E1F2A
+:10D56000BEA384F9317BACFEED59413E2EB77379F1
+:10D57000E57C5C9EC8F92A77E6CC18168ECF83C06E
+:10D580001723F38FA07C98AE9B0EF47F1C48BFC777
+:10D59000A8FFE440FFC889CF9FA07E12949BA99F5B
+:10D5A00004E593D44F82D24FFD24E8B795FA495051
+:10D5B0006EA37E123C7F9AFAE7503652FF1C9E3FC4
+:10D5C00043FD7228777A7DF8FC396F1D964DDE7A1F
+:10D5D0002C9FF73660B9DBEBC77E2F7A1BB16CF658
+:10D5E00036E1F397BDCD58B6780358EE053ED332F9
+:10D5F000E06DC572BFF7189607BD6DF8DE21EF1913
+:10D600002C7FC9E96E9B4072652A2F3617B1039BA8
+:10D61000928A5DB9E0AF2495B07AEA1DBE5C03AD95
+:10D62000A7BA699DD2B1776520D748EBBD6B587B0F
+:10D63000E63D24CF44EB993ED63EE097AE3C33AD79
+:10D640000FA867ED8337FBF2E2687DB09FB55FB549
+:10D650003390174FEB5735B1F6E12D649285D6879D
+:10D6600007587DE411D7242BAD8F6C65F59C0F7D99
+:10D67000936CB49ED3C6DE1F7F2E302981D6C77728
+:10D68000B2F6895F937C3BAD4F2412D6F32CB9F9E7
+:10D6900089B49E6767F5C2BEF3654784F57DAFD256
+:10D6A000B6104CDACF7539B932F513F61ADA56805E
+:10D6B000C95DAFBB21571E47E9A79045D0BE49576A
+:10D6C000C4EA06B212DA7FAB9B8EF5FD8A03DBF764
+:10D6D000E8E6B0BAC181ED7FD52DC4FA41C585ED2C
+:10D6E000C77595AC6E7061FB67BA9FE37887143796
+:10D6F000B62BFAFFCDEA0637B63F2CAFCFCDA7FD4C
+:10D700002BF56E8F8ECA75ADE42E2703415E9BD23A
+:10D71000C11EAEE37EEB2C9D03E57E5D8601F56CBC
+:10D72000EF7FE53C857A063FC9502F7B1AFC5E0AE5
+:10D730006715C251281C7DCF70267E33568033F189
+:10D740009B7215CE6A84638E0DCEDE6FC68BF87C1D
+:10D7500053A1C2D9A0A3F6BED61ADBBC265E9A207E
+:10D76000E273A95285F308E293181B3E01E55A01C2
+:10D770004E4059A2C2D98C705262C3C7651827C0E7
+:10D78000711996AA70B6239C8CD8E0040CD789F83E
+:10D790001896A9709E43FAF48B6D5E2EE3F5223E37
+:10D7A000C62A15CE1F109FACD8E0ECB78AF4D96F0B
+:10D7B000EDA64F00E164C736AF3C9B489F3C5B370A
+:10D7C0007D5E433857C60667BF4DA4CF7E5B377D6D
+:10D7D000DE4438C3629B575E82489FBC846EFA7CED
+:10D7E0008070AE890D9F8329227D0EA674D3E72415
+:10D7F000C219131B3EF9A9227DF253BBE9731EE146
+:10D800008C8B0DCEC154913E0753BBE9F305C2B9D1
+:10D810003EB679E5A789F4C94FEBA6CF258493EBF3
+:10D820006E447C0885638D0EE7503F913E87FA7504
+:10D83000D3C7A407380514CEC09EE114668AF42924
+:10D84000CCECA64FA21EF462726C700E658AF4399D
+:10D8500094D94D9FDE88CFD4D8E655D85FA44F61C8
+:10D860007F461F8FB173921DFCC644E2DC4A5F996C
+:10D8700094FCB383B0EE2816E204B047A4C036800F
+:10D880004FD756F44B65A7EA073909F8B9C536876B
+:10D8900013E2017AD5DF21ADB81FB1EC4C14E24D93
+:10D8A0002FE9F38603BE56EA1586FA3D0963E304C1
+:10D8B0007F2BD19524D47B15F516FAA7940C10DA9A
+:10D8C000D34AAF12DA33DC23857A9FF2F142FF7E2E
+:10D8D000357942BDFFAA2942FF2CDF0CA13EB06E74
+:10D8E0008ED03FBB7E81D07E454385D07EA57FB95B
+:10D8F00050BFBAF15F85FEC39AD608ED239A370868
+:10D90000EDD7041E16EAA30E3F21F41FD3BA5568C3
+:10D91000BFF6D83342FBB8B6E785FA75675E16FAEC
+:10D920005FDFB95FA8DF70F1CF42FF5CF237A13E45
+:10D93000C9F481D0BFC0FE91D07E63FA271A3F564A
+:10D940008C5FD4E612E6CF6618D09F0D580D58377D
+:10D95000EC35B3FD0DD493210E518C75C3FE858E2D
+:10D960006488070000EA4FE4F62EBF02E255BF18B4
+:10D97000EFBE02E2B8BF30B847D823F841EDB2FBA2
+:10D980001E3DC6135B25920EA54307659C9EC713DB
+:10D990008C4C7ED767E53CE50BD183BA7ED4BFA023
+:10D9A000F5F57A8AC798A0FEACEF57963E3F649C87
+:10D9B00075FD0CA55B87B2E70B2D305EC97D309EEF
+:10D9C000C7D03918F0D28E631C305618C794598EC0
+:10D9D000E36C84715282E31833CB35E3984AB7F293
+:10D9E000E77C9CC7406FA28DB37EC078713E9915CD
+:10D9F00038CE16CD38EB332B34E3C4B1F9D0E77C05
+:10DA00009CA72E378E71E004713EFD2B719CE7B40C
+:10DA1000F3E95FA919C782E3C0731887F4A5BB981F
+:10DA200034CA67636719CAC19FCC182733F4A9F8B1
+:10DA30000DD4C90766920DE338E8B8B41F199244B3
+:10DA4000859A907FD127217FBE88A3FC0F89A705E7
+:10DA5000F7E33EDCD72FE628123FC588EE93AAB93C
+:10DA60006C2EDA393D73858396CD07063D02E36C53
+:10DA7000B43AB369BDBD7992616104795A5CAF9CD7
+:10DA80006A0B91F3EEFD591E195243C75F116747A8
+:10DA90007CD4BA5A26E9C4E727E8BE8BD0FDC987F3
+:10DAA000749F42E87EE52385ED33FF9DEECFA0DE37
+:10DAB00046F767D04EC86A7CEF048F339FF8A5E421
+:10DAC000077A7F71D7CF145C277CE4ADF4548826A5
+:10DAD000B09F79ABE2291382F8CDF7F512EAD41C96
+:10DAE000F7D1A5E3BE16E3079D2F19FD5B81AE7547
+:10DAF0007D284D79BF0184BCBB77EA21C986D53E1C
+:10DB0000BAB184CCAC995E90865A24F55B4EF19CF8
+:10DB1000B1FB1A85BE41DA95B63B9D96205CE25278
+:10DB20004E007D4CF40FC0B9A588D643C6BFB5449E
+:10DB3000ACCF2272B04EF97D523F80B0F83F1FD774
+:10DB4000E15280AF25748E1994D5B3A01C09CD2C59
+:10DB50005E536A67EFAAF878162A2480FB6B5F0A87
+:10DB6000C4B1892F19FBCD51F7C91AFC4A1593ABE3
+:10DB700084D2B574BE1EE9AAC5F7FDBDF12EDD70D5
+:10DB80005AD63DA24068B627FC67BBC57652CEC6C2
+:10DB900053E9AACACB29CEDF13C07F5A9E06FE5393
+:10DBA000BC4F72FE07E598F1DF63744F03FE776E9A
+:10DBB000D213E417E7FB6D9CEF8BEB45BEDF06E766
+:10DBC00071B4FF6D2BB358BCA9A197C05F3A719196
+:10DBD0000EF50F1550B31A86FFDFB91CCCA9DBF583
+:10DBE0000AB0F7F672CDFC381FEEE47C98ABA1C703
+:10DBF0006D9C6F7339DF9610DFBD1918BFF02B10C5
+:10DC0000D79B5D2E11B0179EBB55BEB5097C73AB7B
+:10DC10007CD3E07B27E7DB9D7731BE69F16EE37C47
+:10DC20006B6BF84C2103C2F1D6E2396F95665E3E0C
+:10DC30002DDFEAB95CDA0DE04F4D77E5AE3819D249
+:10DC4000FF96A2C92B4E86D8855B4BA60BF559A52E
+:10DC5000B385FEB3DDF385F6DBCB970AED736B7E00
+:10DC600026D4E7ADBA4BE83FDFB75A685F58779FD5
+:10DC7000D0BEB8FE21A1BEA46193D07FA97F8BD076
+:10DC8000BEAC7187D05ED5B44BA87B9A5F12FAEB1D
+:10DC9000F65E7933C8D791B7F504E27D179CA731BA
+:10DCA000CE78C1A938A1CF49AF03E5F8947708969B
+:10DCB00067BC4E94F3B3DEB15856834C8E033B7B66
+:10DCC000C002F1534F1CB5FB89741D97C7ADA99BCA
+:10DCD00000EB0D6D1F4FC8BFCA37ACF1F5A55A0058
+:10DCE000716F4AFFE20603098C2254BA7B77CB732B
+:10DCF000A73EA4BDAD87F60699047A85B717B74548
+:10DD00007EDE21750ECE80B8EC7B46B23D24DE1857
+:10DD10007EDE42FA805F11ADFD9C8E94879EF76C8B
+:10DD200095D939CF117DDE5699E2556960FA5FF9D0
+:10DD30007C461EB1413D30B8C67299F19A283269CD
+:10DD4000C0E78182DE2F69B83AA8E704C661F6749D
+:10DD5000A97F94F07C59E375C27B6F48EE2D80C794
+:10DD6000B97D7A5CAF49E040E62DC3003FD7561934
+:10DD7000D6D1E614F4BB5ABDAE15271542DEF41613
+:10DD800061F996B704CB77BCA5581EF3BAB17CDF16
+:10DD90005B8EE587DE1A2CFFDDBB0ACB36AF0FCBDF
+:10DDA00013DE3A2C4F7AEBB13CE56DC0F28CD78F85
+:10DDB000E5596F2396E7BC4D58B67B9BB154ED6790
+:10DDC0004FF27786AFAF67410E8DE1727670EDBC92
+:10DDD00035757D837276582E433953E95BDC60E4F8
+:10DDE000F2902AC8C35F611D4E0179E9A1BD41E1EE
+:10DDF0007218EDFDC8ED206FBD7F047923640DCA54
+:10DE00008105E4EE7BC81B8153841490A73E1A79E8
+:10DE100012E550952355CFDF904ACE817CA97265DB
+:10DE200091993FA4CAD5FDE02746F0B77A2B125F3F
+:10DE3000FF987F4402B93A20D9727E5E417C2EACB5
+:10DE400077F1B16B29B856E827FB87C03AD235E4A1
+:10DE5000ABC110DFEF3A4685202BFAFCB4F2129DDD
+:10DE6000EE2EDC3F94F929F37B85B79BE3185DCD5B
+:10DE70003A524446C2F972CE3137E567DC9FAE1E96
+:10DE800009FB66FA5C264900C7EF9C1EE1BC800CCA
+:10DE90002248E79EE8ABF63FF5C47FE6C0B9BF0570
+:10DEA000F49CCE3DEE80BE86E9EF53CE5B42CE972A
+:10DEB0003C46673AC4C13BB30D76E63F4C12E94895
+:10DEC00026E1F9814AC703D95F0C86F399FBA81CA8
+:10DED000827E750D1A9C402E231F3DD9FB9EE8B90A
+:10DEE00000E61B133D0D04CEB9283DB7C27DC758CF
+:10DEF000E9D9939DECC93E9ED8C0E87C84FBA7D1AC
+:10DF0000E8AC9E8769F1B84591391FB81C933B3442
+:10DF1000F42F15E8DFD7EAC0FE07F77E9009E7780F
+:10DF20005DBBAF48204343DF2F60E73DDDEFE70BEC
+:10DF30007A20FDE9EF99B03F3EF8C2BB58AE254CC0
+:10DF40000F375A4AE62A6382F062BD47106D5E1EA3
+:10DF50004512E7D5837E76A4AAFAD99A09F2B49B32
+:10DF6000DB81B0F9F5209FEAFC0EC0FC289CA920BB
+:10DF7000D3741EF972C95DC2FC46A7E0BC7B9A9FB0
+:10DF800027C140A411143FABC14012A83C2AEEB5F2
+:10DF90000AEEEB9C6D3E8853EC8D77D65296786CEA
+:10DFA00067DF0838E03D319EB1ACD15C23FA4F8980
+:10DFB00035A2FF945113EA3F751D7ECAE6A6F82DDF
+:10DFC0004FD7D79CEC05EB9C8BAF736C5D55F1ABD9
+:10DFD0006ACAAAB10870C47A57BD54C4EEE13812B7
+:10DFE000664638EF53CBE5E9061CE76CE3C004183E
+:10DFF000F7ACD754C3D6577B0D1B37BD26747DAD08
+:10E000005C155F73725410BF68707F68FCA8449001
+:10E010008F4CB02ED2B681D1FB47E5A7FCB901CF1A
+:10E02000D55B942FC07F370F51FD7719EB2A5C4FDA
+:10E0300093DE671C01CF770AE3D1F71CEAD938BC1D
+:10E04000175D6E64724AE5A71ECEBB08DF1F98906D
+:10E05000CF6E0A3181C2EB902D7520577E85E9B3D2
+:10E0600087CB6995A9CDE07620B95B41AE178C5579
+:10E07000E5DC31EB036AA73FFE8B82F7CCC8D714EF
+:10E080007A4EF0AAC322526283A0EA82DDCB8A6173
+:10E09000DDFEF8C59BF83EBD3E07E67D9EE88AC0E2
+:10E0A0002E9D276FDA4685E8EB6985C5B1481DDBF3
+:10E0B000E7F8E81F98DFE27A71DFB3A441AC9791EB
+:10E0C00019A9606FCB362AC44F715F0AFB2675DE33
+:10E0D000D4FEBEABD811B925A4661DECD31F53588E
+:10E0E000BC67819DC87DA8BDAEFAC3AF7320EED3D7
+:10E0F000AE307F573D0F5F9AC4F6831533FD061788
+:10E10000EDFFD1EE51B7518B4BDFF7AF43FF673ACD
+:10E11000716E27E1745F5827E2D713FE5A7C553F92
+:10E1200028EC5C9EE391DC2845BC2FF535B773AA3B
+:10E130007E2419EC42DC274D5357E540E172E0574D
+:10E14000DC56430AE33BF051923B0DEE907E866035
+:10E15000BF24C398E8FD8CD04F8FFDD258BFCE426C
+:10E16000DC1F132A4F4383FDCC41787DD9B862BFB1
+:10E17000AA3F3CFBA28FCA4BC5EF1EB511BA6E7EFB
+:10E180002CD7A73AE9F3CAEDF7DA5CB43C23FB6C71
+:10E19000C0CF8FFDFA88F77D6F31A8F470592488BD
+:10E1A000A771F924753E8C537CB15DB1E33942A36C
+:10E1B0003160A4F259BD7B6931198EF5E3ACBEFE26
+:10E1C000533DD49B457E55FCE6D15407BB27C4E2A2
+:10E1D0004924807E6EF5B6FF2884F5C2433A51CEBD
+:10E1E000B4EFC1F8179350AFE71B12C2DBF16270B6
+:10E1F0002ABCCF7E3CBBEFFF546F8372F269D02301
+:10E200008F464ECAB9DF0AF482FD7EBEC19A8CF6F3
+:10E21000FE5A722DE8BB4A17E267FE6BED8EC78788
+:10E220001FA7789DDBF6179B3434D44E3079EB6A08
+:10E230005AF86F265D747BD24EE531D44FA280F13F
+:10E240003D4733F7BB5B5859A9046C701FA7728B0D
+:10E25000E2A492482A9FD513B89F40DE33FA213EAC
+:10E26000BAECD957DE194FE9BF6C97925CCCA66324
+:10E27000915283FCF1D0BFAB4606F951F1FB570C2C
+:10E280008E61ECF93D4941BE2CDBB5CF408685D38C
+:10E290007152D33E439B25027F9A8E17C27A5BBB95
+:10E2A000E31F06882B7EBC57226959E1EF976F79EF
+:10E2B00005D73DA013F293F3AB9B7F617C0B4C7BA6
+:10E2C0007934F6B3833DEC896FD9B09F4B41F97E29
+:10E2D000EE65B8C7F4BED10974287F6E850DE6736C
+:10E2E0005AAE6172FEEB7B5341DFCB155FAA1D4B2B
+:10E2F000F6BCFCC99FA3FC2D39FAF354F41F882BFC
+:10E300004387B6D99701F35CBCF9569C671971A392
+:10E310001C96FF5A5F02F74C2FC8A46857043DF9BA
+:10E320008B81ED5F4E6FA5CCA5F33C0DF8817D7B15
+:10E3300053EFDF8E71F39FE13DB89FF339D3951012
+:10E34000EB174C8C5F5B0C3A351E6A12E477DBFAF4
+:10E3500056E0D3D97EAE3438F7A074F071BA49973D
+:10E36000285CFDD18234C627E29073F87BD4DE4F5F
+:10E3700082E7D0BF557199870BEF71FBC8C65FC9A3
+:10E38000C7A778C7C1FA753A35B2FFF70F3E3FFA13
+:10E39000D34A42E42C44DF99FE6FBB8FE9BBAAFF4E
+:10E3A000FEE945D0FEF95B4C8FE03D582F285E8199
+:10E3B000346CDF375342FB40F7D991F47C9BC2F5B4
+:10E3C0005C6CA73B1C5CFF5539A1F8CB5242A8BC42
+:10E3D000D07192900FB83F2EDB48DF0FF1CB3C306D
+:10E3E0002EF633049F87AC1B4BB85D38A4B107648D
+:10E3F000734A4C7E74A5E27FFA09D0DFF78C4E9FFA
+:10E4000003F4572981F97FB2F3C03B73A89C7FD2F4
+:10E41000A4EAAD6857B57A5BFEFC1812496F3FB1AC
+:10E42000D07D5724BDA5CF23EAADA50DE5F9FF9614
+:10E430005D55E9D7AEA11FD8C7971DD1E9A8B58F03
+:10E440001B0C8E88F691FEBC4572C2E550953F5577
+:10E45000EE2A7E5BD51FEC50B77CAAF2D72D9FAA7F
+:10E46000FC69E72BD24FDBFE07D06F8AD7EDA64DB4
+:10E47000D3C07F3675128CC3E7CED4E33D4DD3E7CE
+:10E4800084DDD3B8231EEBB3F46DBF079FF083AADE
+:10E4900059C3609DBF9DF814766E5FAFA01FFBF55A
+:10E4A000A54B13E87CE670FADE4EC93D95F2A35405
+:10E4B00096027114CFD932F12524413C59222742CA
+:10E4C000F0B8BD5CACC3CFC4D4209C9EFA7F5BBFC8
+:10E4D000FBBB9647295F4F6413F2372871FF411D3C
+:10E4E000EB10799ADEC2CE313CA325FF00D4C336AF
+:10E4F000B924641FE13132FB7334FF963140BFDC35
+:10E5000059C312989C0FC6FDA287DBB12E9F230131
+:10E51000EC7B57CB40DC17761D5E687547B067070C
+:10E52000B89CBDC2CF613A2C52BD9ECA7D07E9445A
+:10E53000BFC66731478CCBCD31AA769AF38DFEE802
+:10E54000E9F8A55C0E67D357134686F06DE6D48FC5
+:10E55000655B381FE0E744C8BEE2FBD217E41AE867
+:10E560007BC0DC565812217E53C9E93771FF9706EC
+:10E5700058F7F25B7265A063BE452FC4431619B904
+:10E58000BE0E254301AF89FB973E3086CAB1E7B086
+:10E59000DE69A6F3F3B47C6A7047D8DF69E909F055
+:10E5A000C1BFDC6A64FEF2DB4AC962A0EBDBB7B232
+:10E5B000F3DEBF199C5591F04C37337F733629B980
+:10E5C000305AFAE9D1377796359047E9D16561F746
+:10E5D000B5C3E58FE97D975DF2AF96400EF5AC9E31
+:10E5E000CCEE371712F7031324D4F71B42ED576E06
+:10E5F000F3F467E13E4D758B64D7D1F66AB9CD006F
+:10E6000072EC69DE2583DF7E9383B8707F2DD70C93
+:10E610009B1912FFA2CB1ED2EBC05773E6027D3FBF
+:10E620009B692480976BE8A73658FF3F6B19857A62
+:10E63000106D5EAF7BC9B47C05E0307BA69587C2C8
+:10E64000E478A17EEB24D217CE81271ADB5638233B
+:10E65000F02FDFC4E42C66FB66FAFFCCBE4DA0F6BB
+:10E660008DC9B5126ADF2CA630FB9616C9BE2D5F88
+:10E67000ED4803B958BE67207EBFB5FCB5C52991EA
+:10E68000ECDBAB7CDFFB1ABF07DED197DAB71121D9
+:10E69000F6AD2FB56F11E2E45FC46ADF4CFF33FAC9
+:10E6A000F72AD8B708F3359B44FB56D4B21AED5B72
+:10E6B000515FBD705F8998A87D8BBF9C7D9BFFE8F3
+:10E6C000AD58579CF111E407E80AF6ED356EE760A6
+:10E6D0001CB0733798587C33563BD72F563BF73FC7
+:10E6E0004467D5CE2DEF27A1FF122E87CCCE2DCF9C
+:10E6F00062766EF91E66E79667333BA7B56F796160
+:10E70000F68DBD5F3D84BE8FFBC7ACC7EF80FB8439
+:10E71000A58AD344FB173BD4EF276AC684DABB1B18
+:10E720004C32D239CCDE393FC5EF607AB2777F0503
+:10E730007B978D766C10E891563EA60C8A17EEB347
+:10E74000BDFDE5A9DFFE0EF4E5753DDE177A57C77E
+:10E75000F6477BBF3C350AF4EE2113B3BF4B4C8C1C
+:10E760009FED5E1FDAD3494399BE57DDC3E857BD1D
+:10E770005B62F35DA9F73B601DF8EA22EE9FE7EECE
+:10E7800061FBE759C6D69478B897F42F0A61DF7D0C
+:10E7900090E2F921F2507AB102E380CFC7D9B6C234
+:10E7A000FEB2542626F063E71D9EF231F8AFF32E39
+:10E7B000D6A1DF3B0F9EC33909BF27A1DEA398D3A3
+:10E7C000BCEB953E24FC7EC44423E3C3C415927F76
+:10E7D0004B16DC4710DBE769FCFA757C9ED49F453D
+:10E7E000BA90BFEA23C6EFD669E9E164F3AF5AA94C
+:10E7F00017E9512345A407E568F1FCD4E0FCE7BE26
+:10E80000D0B6AE0FB42F95703FA5D2433B4F953E87
+:10E81000EA7E651ED7114FCB2E05F8A59DBF4ABFD6
+:10E82000B079ABF4D4CCBF4EB51F579361A06FEF56
+:10E83000EADC0F8C01F9F833A503C5EBB6D9D96929
+:10E84000A1F6F8416E97A6BA8FE7A73A806EECBBA7
+:10E85000C439E5BB5E49A5F3B9D9953512BE1FBED3
+:10E86000F52B831BE20B07CC9D68DF54F9FA84CBB0
+:10E870007B80C379BBB73D1FD79166C98E7A13D011
+:10E88000D82F7E7FCC730FD3AB03D23FD6F5198D33
+:10E890007485658014AAEB10F081FE776A0BE38320
+:10E8A00007F840FF3B8D741E023A57274BCE00F409
+:10E8B0006FDE752FC8CDAB66FA1CF4B75C72B2EF91
+:10E8C000CB882523F5B2F22947924F0C4EE404D7AA
+:10E8D000C579D02F29DCEF98686C7D1BF09848F53E
+:10E8E000610B09F74354BE0FA17F2E45BAF7D383BE
+:10E8F0001C7FCCE5F355A0B705E8DA69007FC613A5
+:10E9000060EB87DAEE911DF9481F95DECD747D1816
+:10E91000CDE8AD8B40CF9BD53AA7A7A74552E0FDE8
+:10E92000C974FFDA4B82D3AD2F0FA9720CDFC36914
+:10E93000E901F1808C10BD07FB147A3E59DD7C148F
+:10E94000E932652575AF42E80E76EB72F489A617B9
+:10E95000D5CD3F8C5E7CA2D18BBDE6CEBF8C80F83E
+:10E96000D71E09ED03694914F6FBF166E6671C3012
+:10E97000BB517E3B5F53F0FEB9D68E7CCDE51EF6D3
+:10E9800017A1DFFD4D8289809DB39BC9472A1E03D5
+:10E99000981C85DAEF57CD6EE45734F8717C1D8EE4
+:10E9A000E63FA9F51B613CB88FE810C70BF32F7841
+:10E9B000FCA7A779A5F171BFEBBCBACF3349AB81F6
+:10E9C000B0F8FF0A63C8B9D46DFC5CA03B4E16ECEE
+:10E9D00067375DA61FC45F0274DEAFEE7C0AE3BF3B
+:10E9E000E79F393E0DE477D91FF5C444F9DCBED367
+:10E9F0004A02ECDE8501D6D98ADDFA88E72884D47C
+:10EA0000B2EF1C7F6745FB52F1BCD15F4CDFAF78A2
+:10EA1000F1A3E110B76A5FC3EC8CEF192E1FBEB6ED
+:10EA2000E170BE5E21B373612DBCEBB8BC9C7B2949
+:10EA3000BE14ECA4D4C8BE5FAD689AA51843F6E92D
+:10EA400023CD0A8E4BFBE1BD65DF0E09E3E5E1F85E
+:10EA5000AD66F07630FB57D1ACF8E13BD88AC62DD5
+:10EA6000B8BFF5347E6A00BF6ED2EF9E65DFD73641
+:10EA7000EBC5F861A33E60C438A7FEB87138D35B1C
+:10EA800049884755A15E5637F13899267EB4EC7710
+:10EA90007B5EF451D22CFBFD6F6C606FCEB66EB70F
+:10EAA000617CAE91C5DF648B1C393ED7535CAEE907
+:10EAB0003E1E979B7A9A0C0F8FCB9D85FF503D9CF5
+:10EAC0006FE6FAAAC6351B7BC5747EBEECD90B4F28
+:10EAD000C279D2B9E73F7912F0AFFCE6B327EF86EF
+:10EAE0007389BD663BAC7F9E67DEC6F8BBFADEDD90
+:10EAF0005CCEDB77FCE6E927A81EB6BF67C47B5B6C
+:10EB0000ED7B4E67C2F78CEDBBBE4C85F8E6CA3D87
+:10EB100005B89F59F9C2A4B4CBDD3F01F9F4C77021
+:10EB20007EA2E5C781DD7A02DF739E3F6644FFA3C4
+:10EB30003BCEDA54C5E2D70E1E5FDD19F9BC4A8D13
+:10EB40000756EFBEE5E6EB611DDCAD381DF89CC74E
+:10EB5000077B8AABBE45F93A2206FEEDE4F1F3A647
+:10EB6000A911E3AAE7E13F944F9BCC625CF5C2EEAA
+:10EB7000C5FFF604B4EDEE1535AE1A88816EEA795C
+:10EB80005899D9B5CD0CFAF1FC6F318E0D7CA33EAE
+:10EB900039697FF64226C423CE289D77E23DE53DC4
+:10EBA00046BC6754B1E75DD497F6178EE23913E19E
+:10EBB000E751EDA4FB879D1BF0BD8E679B95C56358
+:10EBC00039FD215EEBB0E1731E976572ACC66BA395
+:10EBD000C569DF37B3FB50EAF95CD5B60F0C4413B7
+:10EBE000FF96C602BF8E0BE78AEABCB5F0EC408701
+:10EBF0006B43CF1FA2C5C3B95D0DE3173B7768DF39
+:10EC0000C2CF23BACF1908E93B12CEC7D9B9B9C7C9
+:10EC10002FBD1B89BFEAF9C3DB5AFDF4C776EED0DE
+:10EC200033DEDF8D2EAF9AD9FE56A5CFB9AF23DBE9
+:10EC3000E94EAEEF749DE930E3B9315B67E6F175FB
+:10EC4000A69AD28D7DF7C6F03DC7F781E79ED1FB2E
+:10EC500061BFBCAEE900DA5BAD9E571316FFD28EE2
+:10EC600027C531FFA0BA79DF70B047E7F6BF84F25D
+:10EC700057BDF3B8C147E11C6AFCBDA16D6850DE09
+:10EC8000C18EFB43ECF8B9E7F60D67E72291F3B4C8
+:10EC9000D8387C4F8B08DFB3F35301FE325F93C14A
+:10ECA0006EE9799CB3B26B16CCF76CAB42E03EFBDD
+:10ECB000D9267D913FC2B89FC13A362648A77556DE
+:10ECC000F61D9F3EC9807EE64AEBD863F0FDF84A08
+:10ECD000ABC101FBEDDAD5EC5E65EDFF72A6035F1B
+:10ECE0006A136FC373A37A0D1DEDC9F65CD887DB79
+:10ECF000F34B46835869ED41A24B27E0BDD25A94AD
+:10ED0000E6B0405E2FE6A710D989DF19EA6D854588
+:10ED1000300FBD5D6737475C5F193CC5C2F266289E
+:10ED200076F1BBBFEF900783403E8E6F9D07A353E4
+:10ED30009307A3FCC6FFD7F260F8609C9F401E8C2F
+:10ED400000C677D43C18C93F721E0C882F8D0EC99F
+:10ED500083D1A9C983C1F9F8CF3C18FFCC8301A5A1
+:10ED60009A07E39D0D650590A742CD83716683A741
+:10ED700000F252A87930BEDAB08AD5791E0CCBFDEC
+:10ED8000AB0B42F36064DEBF01DBD53C18CEFB1F4A
+:10ED90002908CD839177FFE682D03C1833EFDF5E00
+:10EDA000109A07A3ECFEE70A843C186BFF50007929
+:10EDB000305E8F77B7C6A544CF83D11CE788290F73
+:10EDC0000685F31EC2899207430B275A1E0C0AE7D9
+:10EDD00044DC98E87930C2F089920783C2F904E1F3
+:10EDE00044C98311864F943C1814CEE738AF287974
+:10EDF00030B470A2E5C1A070FE0BE144C983A185C7
+:10EE0000132D0F068563884F899E07230C9F287951
+:10EE100030289C048413250F46183E51F260503868
+:10EE2000E908274A1E0C2D9C687930289C2C8413F5
+:10EE3000250F86164EB43C1814CE55F163A2E7C1D7
+:10EE400008C3274A1E0C0A6714E213250F46183E12
+:10EE500051F260503813104E943C185A38D1F26079
+:10EE600050380538AF287930B470A2E5C1A070A63B
+:10EE7000213E51F26084E113250F0685330BF189A1
+:10EE80009207230C9F287930281C37E213250F8620
+:10EE9000164EB43C1814CE528413250F86164EB469
+:10EEA0003C1814CE728413250F46183E51F2605060
+:10EEB0003877239C287930C2F0F9AE7930CC814183
+:10EEC000D240CC8381F938BBF360247FEB3C18BF80
+:10EED000027CFF9907E39F79307E8C3C18B75ADD9E
+:10EEE0007F8FC77DE377CB8371265E9337A2873C04
+:10EEF00018B75A4BCE823C7FDB3C1817E2BF5D1E31
+:10EF00000C3ACE3F2E374EB43C183ACBB7CB8341A8
+:10EF1000C7912D632E339F287930122C62FE901FEB
+:10EF20002B0FC6B1F8249C4FB43C183FB97C137426
+:10EF30009B05FBB4E9288AE427937F62B485C70D5B
+:10EF40007FA8FC1330E99C9F52FE09358F41930244
+:10EF5000EBE1FB9CEFEF70B9F880E7A13816350FB5
+:10EF6000857F2AC677978A7928A6703ECE768BF25F
+:10EF70003085B0739429F959FE5AD8AF976BF25087
+:10EF80000C11CFE98BDD47F3293832D529CEE328A0
+:10EF9000978769A59F1E04F6DC3C36721E8A199C71
+:10EFA0001FD3357499C2F9369D97B7C3A739549EBC
+:10EFB0008BCB8FCA40D7698E3619E3F437A9FC731F
+:10EFC00008FC9BC9E16AF19DC1F9376332E39F16E2
+:10EFD000EFB7807F14EFB7CA4721FFB4786BF1D445
+:10EFE000F29F84F23B247F482E11F34F4C3289F973
+:10EFF000270AEC62FE891BD3C5FC13931D62FE89B0
+:10F000009B8688F927A63AC5FC13378F15F34F4C1A
+:10F0100077ADD6E4BFB84F93FFE2214DFE8B4D9AFA
+:10F02000FC175B34F92F7668F25FECD2E4BF7849C5
+:10F0300093FF629F505F58F79AD07F71FD51A1BE38
+:10F04000A4E13DA1FF52FF71A17D59E3C7427B5569
+:10F05000D3A742DDD3FCA5D0BFA7FC036FF1EFA17E
+:10F06000DFE1DF431FE3DF43BFDF43FE8B772C4B42
+:10F07000D785E6BF78DFE2590779098E5B1C3CAF84
+:10F0800040E4FC16DDED51F25F04DFFFF6F92F528C
+:10F09000927FF87C043A2BFB1EB0B7254F674DF9E1
+:10F0A000EEF9086E2D11BFEB9E552A7ED7ADB3B297
+:10F0B000EFB567BBC5EFBB6F2F17BFEF1E11E7960C
+:10F0C000000F6DFE8BDE1697CE0AF692E72908C078
+:10F0D00077BAD9106F2BC2F220E4BFC886785B29BB
+:10F0E000968721FF052DFF0CF92F687904F25FD078
+:10F0F000F20DC87F910DF9337C3C7F461DCF9F51A7
+:10F10000CFF36734F0FC197E9E3FA391E7CF68E20E
+:10F11000F9339A79FE8C00C239E13D8CE5496F2BB9
+:10F1200096A7BCC7B03CE36DC3F2ACF70C96E7BC46
+:10F130009D58B67B2F62196BFE0C552E3F04BFE124
+:10F140000A189FC9B32AA7573FF0C8BAD0FC1923A1
+:10F150001ED884721A2D6F460E7CD397123D6F46CF
+:10F16000777B94BC19C1F7A3E7CD481BFDE3E5CD40
+:10F17000986BF961F266CCAD11F33ACC5B75F9BCD2
+:10F180001923E24A6E41F9E3F238D7125BDE0C9F95
+:10F1900055E2DFE553BA80DF45E982EB750F790769
+:10F1A0000E5A9F1E02FB89AE21575D36DF83562E15
+:10F1B000A2D39BE57798F323E7CBE889AE6AFFF704
+:10F1C0002B581E87B9966F992FA3877C0B07B3BF67
+:10F1D000403B196BBE8C9ED6879EE839E347CE979D
+:10F1E000D1935DEDC99EBE3985D1B9770F7456BFF5
+:10F1F00097AE34B51EC297ED2E546D997F0F9F3B8D
+:10F20000D38EF1998E9DFC5E9C8B38ECA9EC7B7DB6
+:10F21000F0373B9E4F184EF03B7E3B7151FEC4F3DE
+:10F22000E7D2CE7DFBE05EC05A1B71252681B34735
+:10F230001CFA81B00FBBC604F19AAADD9FBEF1474C
+:10F240000AD7DCA2C7FB721D148756F4FB5C89C089
+:10F25000B778F24BDCA7C319DDA55EA1DF756B7E25
+:10F260000F0774490D9E3F15E82DB86FEADACCEE12
+:10F27000B3EAC9D58F4F188DF7C689DF81FC433FAC
+:10F280007519C7B38B106700FAEFB4E2FDD525AF4F
+:10F290002D34C0A070DE1A1A37E85524C6811ACC66
+:10F2A000B6E1706F2F5DBDBFE773B5821FBE88C327
+:10F2B0004D2911E3449F2C283A0CFEF3227719DEE6
+:10F2C000AB482B15E346847F470FDB32F03365C232
+:10F2D000EF75FAD97DCFB0EFEA9BB7209E4BFD9A30
+:10F2E000FB4B8D625DA5DB392BBF9762219698E8B9
+:10F2F000D676C5E31392BF3DDD8CE922DDCC0E91BD
+:10F300006EF14344BA68E966758A74D1D22D61AC56
+:10F31000185F53E9A6DEA7FCA1E89664E3F73C82F8
+:10F32000F42A31A5A2C9473C33E400CAB7561FFAF4
+:10F330005802F01B7E48BF64FF6A7CCB6995C16EA2
+:10F34000A533D0445AC4DE8B077D80FCBDC489FA46
+:10F35000A0FE3E8A78F22197FB8FC8255AAE987E90
+:10F36000F0F802DABA19E46D04FB3D1A18AF4A222C
+:10F37000B89F5388D30EFBA826AFC9B94881734DF7
+:10F38000E25C940DE799762C1FE4DF3B770C25B8FF
+:10F39000EF6F0A7C9E0AF7061E1CD9390DE20F9EFC
+:10F3A000C5A404D6AF59096C7D5DC64B5B028BCFFB
+:10F3B0006C28D111D768F87D4A7ABF44C76BB7BBB8
+:10F3C0005EBB01FCD116763F80D83BDFB81DDB4722
+:10F3D000E1F7E119BAFA6B001FDA1FBF2BEE68F9EB
+:10F3E000C8B630C40EB7373F7225DC6BDDA48BFC8A
+:10F3F0003D73818DFFFE1D7E3F654430DF42816D90
+:10F400000CE6657870001DA77A7A17F25195CBEB60
+:10F4100038FD0F964D41FC5E68911C10AF2BD4DF78
+:10F4200071D3308ADFB8B7657EAF97DD5F1FCDFB44
+:10F43000D79AA9FEA2FDAAFF1BFC9E95974ECA98DB
+:10F440000F71744D19DE13FCA3ADF030F02BC7D54E
+:10F45000340AE429BF2511CF713D1F12277E9AD5AA
+:10F460002ADE07CCE1F7B673DA881F84E2DA63623A
+:10F47000FBB836B17E9D66FF39DFC6F5D4465241F2
+:10F48000EE367EAD9760FDE8E824CE3514DF8E457C
+:10F49000BD71FC8ECF09FA891D5FEB8B22DD8F5980
+:10F4A0006E63FCDB642068BF379559F0DEF9FEB26D
+:10F4B0008AFEE05F7C7197BB7FA43865889F96C009
+:10F4C000BEBB772590B120876B2546EFFA8C92085A
+:10F4D000EB962A77AA1CAAF2975116E78E740FF5BD
+:10F4E000339B8472965736443280FCEC9530FCD5C1
+:10F4F000BE86E2759975DB47D6F4017C3CCD9FE171
+:10F500007D32538BE48A744FE7619B8DDD6F5CE342
+:10F510005B0DF7467E419508EC5486A13E2B127C8C
+:10F520001FD9887EE95D36077BCFC4F320C9F51962
+:10F53000709FA2BD79D2E47514CF27A83EC07AB5DA
+:10F54000497122DEBE2A42F09E2C8FD7F59D46B629
+:10F550006C08F17F37DB721B6D145EA38D7D6FD954
+:10F56000CBED94006FE77FFDC306F03B2E1A917F31
+:10F57000BDB9BFA9BE7780D3675C826B2BBC4FE05F
+:10F58000979F51E3E374DB9C8B46415C9ED23BC466
+:10F590000E06F9E663F951DC04CF3F922C3A94430E
+:10F5A000E27239ECC27D761FEA8DAA07242011C8C9
+:10F5B00053A0DA37A9450A58A9DC8F365902708F53
+:10F5C0002EA99CCE3B19F29A9818BC56F99C18D7D4
+:10F5D000A2F29803CE3DC1ABF3104805F8AADD5363
+:10F5E000EDE5DA44668FD63E24635ED4CD729B1976
+:10F5F000E2A9592E471EA4884C921D78AFA65F3908
+:10F6000071520C49FCC05F2776FB0154C9AFF94623
+:10F610003F2FD2775B176DCCDF1E97E0FE33D06BA8
+:10F62000F8E1CEFDE02E38CDA417BBFFC5ED04F701
+:10F630006B0AF97A37EE3F74EC7BD1C00D24F43BB2
+:10F640002AAD9DD86466EBFCB8EBD9BA37EEBC05A1
+:10F65000D7BD6E3B515688EBD4C8965107E09EC586
+:10F66000C80F997E126E1FECF40FD029E7B04F0F30
+:10F67000F4F9B67641CB6F123075D787EAE01C8675
+:10F68000EA5BC8FB67357664C5F441B5185EE6727F
+:10F69000D4FF1EA7DE1D4247EDFBDD714AC9D4FD34
+:10F6A000DC3110ECC8113DDC0BE9C8A5F3A3F3DF96
+:10F6B000C8F525F173FF6498D7C6961BCD20DF6B84
+:10F6C0000379F662FA4EA2A9049997485C18CF19FB
+:10F6D000493D32C88F518B4241FD41A58424A4C0CD
+:10F6E0003DB42221DE432C493CFF4B00F9D22DA72B
+:10F6F000548E43EFE5AAF2A99547557E6BE1A0052C
+:10F70000CE0721624E4BBDD484878146B2D90EEB21
+:10F71000BBEA5FD6727FAED69CE9C7EF977C19E84B
+:10F720001FADE4FE51ADA5D084E6605F32AEEB2B99
+:10F73000217E42E9B03285D979753E5AB9F45CD45C
+:10F74000137FC83EC12377E27D44CF45033E5FA7C8
+:10F75000B807C0FC55FA5CC3E9A3A58794C0F79D20
+:10F760009C2E3DE39B63877BC1892617598FF8E662
+:10F77000E13DEEA6C04813ACBFF76AF08D01CF6B38
+:10F7800013C684E3295BA2E099CCF0BC8EB8FFD805
+:10F7900046E53767455D6D3CEA15792B3D275CAF43
+:10F7A000B47AA4EA8D1AE7BDB6B2FE005EBBED41A5
+:10F7B0006F3CF18C2E4EA504EF5739F7C4A31DD131
+:10F7C000EAD3E77CFE9E7846BF058A7B06CCCFA3B2
+:10F7D000EBCC043919EE20BD8A2992C39BF5A8E72A
+:10F7E000A435B67BF8AA7FA5FA55DA7EAA5FA5DA1A
+:10F7F00063F51EFCDA04F77C9003A999CA2DC5A70E
+:10F80000D6CEF64B9B6DEE4580573CC53D0EF68D32
+:10F81000430259ECFB5F512FA2E941BC46CE9B024B
+:10F8200032AE0B3EBA2E644BE178A8E30F4A48642F
+:10F830007CA45A0EEB7DDF1CC206AB269837A7EFDF
+:10F8400070E28675ABEF48769F714D02B3BFB50984
+:10F850006CDD52CBCDB692BB51BF65E2338EFCEE70
+:10F860007803AA70DF7C6D82EB2EA087A9C885F390
+:10F87000E863274EF04BFBC84D127C379A54E99051
+:10F88000D83D7312FC7E8BC2EB53ECC8057DED03B3
+:10F89000FB6BE8DF1239CFD8A309EAFD5EE67F3AB9
+:10F8A00049771EAF471398FF7908529FF42A56F301
+:10F8B00082A9E7394E09E8D46EBD0D916EBF2031A3
+:10F8C0003F3D91D14BBB4F00C287FEFEBD7B0D4437
+:10F8D000362791E0EF59D599D0BF8F27CE26B05764
+:10F8E000BB1206F0734C671DD47F25779A128706EA
+:10F8F000E55D95E30727CC70422A52DBF55DC361D5
+:10F900004F45E57A27D0BF7D42D760CC41493A3395
+:10F9100099FCB8F442BE20950FCD8AC00733ECC3E2
+:10F9200043EDA4D53004FCD17629CE09F72CDA9723
+:10F930004A0C5FC9C4F329C9C23CD3E3997FDDC136
+:10F94000EDD53B09592827AA3DA6F3AB83523B0FBF
+:10F950008F11EF7490CE3DF1FEAD706EA5C93FA939
+:10F96000CD4F3969A105EF7F6CDC63C6FD6B57098C
+:10F970003BC7EF6A31A27D8EA6B7696DE688711C20
+:10F98000B5A4F47B0BE897A6D424823D4C9B7BD294
+:10F99000067CD7D2A543F25D7308F645AF2B11BFA5
+:10F9A000BB55CBF4F49B1217D1FEE91993B1549FC8
+:10F9B0003758E488F7CD4F73BD52E5F14A3A22DF5C
+:10F9C0000F9D06793CEF7EF31D1709DEDF6F88631C
+:10F9D000746C886374EC728F4F781AE4CD9781FA57
+:10F9E000B0583D07E5FB7F35CF943ADE46AF29514D
+:10F9F000A62AD0B0608A19D68914E29A3C1B947565
+:10FA0000A342E03BA2C7BC3B12F3318E6D12EFF96B
+:10FA1000DAD9BDE1CF3716E077DEA9648D7930A55C
+:10FA2000475989CE09F183F30BDEB7E9A83C2DE8ED
+:10FA3000D39A03F2FBBAE226F63118EAC2FDC99264
+:10FA400052833F40F996DC400D05A5CB7F03F9D4E6
+:10FA500012800080000000001F8B080000000000E2
+:10FA6000000BB57D0B7854D5B5F03E73CE3C929922
+:10FA70002433794E1EC009E19D108724BC1F4E9E81
+:10FA8000448830BC0485EA8028CF2488D6DFB6DEDF
+:10FA9000CBC444F4A2B745E9AFF4D6DB7FB0A2A84B
+:10FAA000200182069AA41340E4113408A8A8AD519D
+:10FAB00029620BC908EAC5D67BFDD75A7B9FCCCCFF
+:10FAC0004922D8DE4E3EBFED3E8FBDD75EEFB5F684
+:10FAD000DA872EC977134B64CCB7D8C0B64A8C7D71
+:10FAE00087BF1B43ADD96E602C89B196383BB54EAC
+:10FAF000E70CC7D284F07E8563693E63D5D6D85CB7
+:10FB000016876D7F3F8B85F18A58EAD202685BAC1D
+:10FB1000AE5A95B12546AFDD0ECF774EBA3CA48ED6
+:10FB2000E12FD8DF3392B12E236B94E2B01F606CCB
+:10FB30000C4350F8CFED56EDD097F0FFE1FD448B2C
+:10FB40002D20C3B8CCA35CECB0F047BE1B281E4DE3
+:10FB500066CC285E939ADEF846CA652C76721163ED
+:10FB600070DFCA5C8FB22CB8318CA99E18C6A2D89F
+:10FB700033F6F3D98C19F07D584757F3BBFD7C0061
+:10FB8000C71FFEE54A0C83FB1F29C118570E6317D8
+:10FB90001E3C15E3B6C1F507E5723FF46F4740C65A
+:10FBA00087F0926F870BA3197BC4EE1981EBBA63C0
+:10FBB000DD7F8FF1DA42F7D903703195B1157E19E7
+:10FBC000E7E6F0C27FABB65919B384FA95F509118F
+:10FBD0007DC018E1B5D2CCD6D4DB7AD26305D2038E
+:10FBE000E65DB17D8B295DC5F9BD93ECD0BFA0C0AA
+:10FBF000AB80EF0B0D317E5F66089E25DB4799D207
+:10FC0000E1D6474D6616807530A5DDC86C84B50A0F
+:10FC100009F0E61578D3C379B8C54AE3DDF57F6509
+:10FC2000BF1996BA18E67A201E9E6F5A51C1727B90
+:10FC3000AEE3AE3FA8652940BCBBFE4D623E953F9A
+:10FC4000FF601E3CFFC0235F20DDF4EB5CEC337EE5
+:10FC5000D211B16E376300CF3241EF3B1F8DBCBF75
+:10FC6000ACE9311A6729F39A909E776DD4DFBFE92A
+:10FC700033E4BB654C095D073C5C3E9265453CDC6A
+:10FC8000618F493C0F20038F8DFD0EDEDF7D6460A8
+:10FC90009C37A7277EB5F6E23AE06F33637F5E6755
+:10FCA000A1F6C23A46ED08BB4AF459DD74F27EE48F
+:10FCB000AFAAC65D261CA7C5FFA78409F04861D37B
+:10FCC000373232572173DF7B0EF0F92326B3EF0072
+:10FCD0007FBB19E79FF546CF3D48AF1BAF96D37D5D
+:10FCE000FDFA1769FC7F249EF86711AE3B17AF2B16
+:10FCF0005FF6B6AE9FE2BA809FD95858977CFDEB6D
+:10FD0000D2D6A3AD4FBB5F2903DFF5F2BEC6EF230A
+:10FD1000843E58FADCACF569808ADAE6CFFA7710CF
+:10FD20003FB1D328BF1A3F2D1374D2F38D46C76E4F
+:10FD3000FE68FA775A9F463FE07FA7C1896DC06988
+:10FD400018D7934FF47CA1E7834E63477F945F3DC0
+:10FD50001F744A6C416FEBFA37FB405AD752D55D9E
+:10FD60006687FB7731CF7A3BAD67235DBFA06C3CE4
+:10FD7000FC3394ABE7385F77EB3933973776DCE8C1
+:10FD800047BDB936464D71D804FD80CE9DBBCC3EF3
+:10FD90007C4E9BE7FC3AB77B9011F15E4EED9FD70E
+:10FDA00079DC830687EEDFFDAB2BB12ABCDF358C17
+:10FDB00095A3DC77C644C2BBCF2E133CFB900EC884
+:10FDC0007F4AFBFF7C803AE9B9F631A847CF7FFB39
+:10FDD0005FB11E78BEEB5B73796FEB3C2DE807EAF1
+:10FDE000E5B413F8EC762167B73755125D963C33CE
+:10FDF000CB84FCCC1EE0F8B4C01FEAD7B6A8D86705
+:10FE0000711D8B1B24D2237A7ADCE59AFA39EADB5E
+:10FE10003BFD85F47E0FFAB0C789BE77213D86850C
+:10FE2000E831D6A1727854F803BEB943F0CD7965B4
+:10FE30008DC9007AE4FC33806F007995C2DCBDE99E
+:10FE4000C1FE0ECE877DAD47BF8EBEE05FF65CCDB6
+:10FE5000FA3486EB1F654AEB45EF68EBBF8BB9625E
+:10FE600049EF88F5B28E1B495EAB2D7C5E6D9D2BF4
+:10FE70009AEE9C817C51B519E895D973DDA8771766
+:10FE8000F7026F997CD16881F7BA1E905CA86FFB6E
+:10FE9000A283A627EE12F85AB96DF10C349A8B6141
+:10FEA0003E3913F5D1176FC624A25C415FFA1E7A62
+:10FEB00035C91F9B711D8CE37B09E07B8374FDF4C6
+:10FEC0005BB6B9D03D28ECB915FE9BDC83C2F59931
+:10FED0008EAE6CDBACD0F364B7DD26B4C7F10EA1F7
+:10FEE000BF845EEE5BBE60E100E7DA1D0EB26F6CB0
+:10FEF0008D83F46375D31653B8DDD5E44B93B7B156
+:10FF00000E3BF15955E313F41CE85FD501FD4A4B54
+:10FF1000C7CF6F55C3F0394ED051AE30A1FEEE4B76
+:10FF20007F82BEF9B2236C9D231CC2AE08FD7B2DDF
+:10FF3000FDA0C1AD1F57D3071ADC1ADF6BEBD1F35D
+:10FF40007D5FF0E9E9C2989FFB0B3AFAAC427A84F4
+:10FF5000F5115E05F0DBD66CF53F04F0B6491C7E6A
+:10FF60005F7314C1DFE92C769F033FAF2A7521B57B
+:10FF700027F0C554F4EB3CD3109F9A3FC70A1222D6
+:10FF8000FC247DABF93779C29FDA1BE5CE07130954
+:10FF90003F4F02F2C3949A8E391620D9AD8EEDE50B
+:10FFA0000A8C3FE5898E3951D05FE8D8C1FB5B3BB5
+:10FFB0004E595C8CD5B057CA4BA07F3BA013C7BB32
+:10FFC000565B60F62C44F95D0D7E9205ECD1EAD3C8
+:10FFD000430EA1DCAD6EAF2897C0EEAC0683238143
+:10FFE0003DAA74C706ACB9D46713E0B9E7EDDE6586
+:10FFF000C42F57EBC86EAD3EAD70B9399248EB5780
+:020000022000DC
+:1000000000F62878AF2E1AFC55C0575DBCC5559B2D
+:1000100049D77D51F1D877AB6AD8758D1EF81EC2CD
+:100020005167606E07B4AD4787C4757C8FDD6E5D28
+:10003000C72A14E08383EB2CD4EAEF179AEC83D021
+:10004000EE151A98B7377DF9A483FB8DC0E4E94813
+:10005000E7AA23269277FCA11F5829F451151028EE
+:100060000EE0A93CCD02D1B1F85CD9E70AB60D1279
+:10007000FB24C25F61A1BEDC37DCD7DB56E17883AD
+:10008000C3F984E3A948912A94B0794B6C51117D4E
+:1000900039C5300CD7C3E468D756C0AF9C6E58B38F
+:1000A0001BD62F0F8016F0A1D85DF2626837164F6D
+:1000B0009197405B6BE476B5D6C09687E3E90581FE
+:1000C0001FADFDC0E1D98A74BFF456FB182BE9AB14
+:1000D0000C3BC9B9586FADE40A50DCD4CA5C5BE193
+:1000E0005A9DEC619C8FEB19F2F11B621C97D9B001
+:1000F00047057E6D747C40FCEB8A33DC9B09FDC0B8
+:10010000131FF17EBAE14A26F0F781273ACA15900B
+:100110000757B6E1CA40E81F7AE2637E7F220C09E6
+:1001200006EAF0139F94FB6C382ED7676CBB3B1B21
+:10013000E7510C12C9A972C0E4AF85FFAD8BE5FC95
+:1001400054073C82FCF786B0B3EB6B8A5EB602FFC5
+:100150002B456E750D8CE3C78069F4DFDF6A7894F8
+:10016000AD068A53B0457CBF29D6ADD18135B8B331
+:1001700067A15EA87767CF8E41BC7A4F225EF3DB22
+:10018000DAA7A03E6E78FBFD31E8AF22BD709CFC83
+:100190003688DD603D975EEBB7450E8B473F7014A8
+:1001A000BEE3003996DCDC9F94543B5B047257EB52
+:1001B00066AA09D695A28BEB1A18D72FCFDB3D7F05
+:1001C000C4F7584680EC4DA1C3FB31CEAF8F5759D1
+:1001D0007B7CAF7A59AFB74CB90FC8E8E7C4A737F3
+:1001E000BEB704F5FBEFCDAEC12AC2E5660F003CF9
+:1001F0003B0D4C61F1C426C394028C3FA35D1B50A0
+:10020000EE5DCCE90339C3308D80845FE298B0B8ED
+:1002100055AC07DE2F61D08E45F86EA0F5C9C857E2
+:10022000A3984746FD3586F9ADD87635BFE644BC80
+:100230003D19C5EE40BFCFB28DB9FD61FA63403CB8
+:10024000F7F726251809EE6863FD6CE4D7E82F98C8
+:100250001DFDAAAEFF3429383E08C874BCEE3A6CC6
+:100260006008E70B46BF3D0EFAC1E18AFA2C0B8D00
+:10027000D725E8AD8DFBA4491DEE407D93C0FB2F33
+:100280001472FB1CFCDCE47F3613F16359E30F931B
+:100290002F673CF75BBD4945F1F1D0D63747339C1A
+:1002A0007F6C4BB401E9F0F2F6BC28E4879D881B13
+:1002B000587FBCD97E0F8E177F05E0CDA4EB6EC2B0
+:1002C000ABA28E8A03BC4E9866533700DE5F88AAC5
+:1002D0009F86FC1FDC6160CFC2143B4DAE59D8DF56
+:1002E0007959B5A3BE7D21B33E9AD6B3C340EBD9AD
+:1002F000191D1CB116E0DE304C2947F8142B535061
+:100300000F2B8622F51EB83E349EDB574D2F2F88CB
+:10031000E7F2F3A404F3E7E17385243FA5B28DE48B
+:10032000AE2BC8FC669827696EBB8CF4889E05AC22
+:10033000847CAF046406FD491E46498D4936A35F9F
+:10034000257DEBB62D06BA4F11FA76CA87AB2B780E
+:10035000DCE33A3D11C63B6833325CD764D621A357
+:100360003F38F92A7305907FAEF278C60E7FE83FDA
+:100370003DAFF3074BC578EEA0BD042F17B2483F41
+:10038000AE7473D9E712CDA32A68A78B2DBAFBE808
+:10039000E7C5621B193795C50BFFA63FEBFF1DE9AB
+:1003A00037E05E98EF3E3B9FAF54CEF915AEAFAB52
+:1003B000DCE4423CECB2B9DF9D887AB1DDC8B6B26C
+:1003C000BEE5E979883FFDE0730CBB6A65FE7CE21F
+:1003D000471BAE67C4E68DBE2858F788417C7CE495
+:1003E0003BD42343FF333101F5F855A15FB456E305
+:1003F00033E4277B1CE727FB0D2139BC333E939E5A
+:10040000D3E40AF90CC7D96FF42FF4F46227813FC3
+:10041000EF44FEDC656314473D966A598072A5CDB2
+:10042000F3BCE0637DBBBE666DAB11D7FD15D80391
+:1004300080BB24EDAA29DC9EEF49E27C552A7F4B44
+:10044000FE766793C4D0CF4F6EE2FA3B9C3F527B5F
+:10045000E78F5F225EAFC51F5ABCB0FB87F2C79122
+:10046000BF8F3F365C933FBE8D453CDCD75C9CC262
+:10047000BEC7BF6914FCD0D7FDF156AEE7F4D75F15
+:100480001178DD67DA383D17F5C0CD0617CA395047
+:100490003F7D36AC635F347F8F296BB2B0BF4BE1D9
+:1004A0007A65579399F4CA2E9BD74B76DC6961E83D
+:1004B0003F30C5DBF133D4876916754318FF2E8DA5
+:1004C000E7FC566F0C8CFF0CFDE2A39CCEE36ECED6
+:1004D000934DF05CEA522EE705174C5B300E2B4D26
+:1004E00028DC817C74027516B4D5E7E029407CD500
+:1004F0003913E9BBD75A4E96617E11FC1E37F2D9EB
+:10050000D8FD27CB8A72F079AE4FF78A56EB8FC7AA
+:1005100035C5B3EE78D723ECC678C6F59207F92433
+:1005200037D4676E23C56B1A3FD447033F805CCC3A
+:1005300067AA3116869C73CEF330984336A73C9257
+:10054000CEF303D3283E9C7BBAFD55D0CC6C9E479E
+:10055000775FF0C17C1D1F809D3D1E8FFED2F18014
+:10056000C980F399D664737F684D16F293264FF4D1
+:10057000033CD5FF61D8B31BC2EC7B6C0297A3C7C9
+:100580005D0ADDF77598FC83E1D2BF33FE5EBDB036
+:100590003F9FA33C63FC70DF2B0BD18EE62F771FB0
+:1005A00044FC4F4F92E9FA2F58C09285F47129E428
+:1005B00097D51BD5E2CFA4D0734CF10CB3C1FDFD90
+:1005C00049D1F9387F6982F722D28929C123F8DE1F
+:1005D000D80979F9285FB6517509688F34B801AE2A
+:1005E000F2ADB6101C1A5C67055F94262CBE88EB32
+:1005F000C7F750BF347E7CDE82EF6B74AF6FFE8234
+:10060000D33B8CFE48EF10FDA53BB0AFE1E12BA141
+:1006100057B4FE3F4A7F2D7F704DFA637E20F6EF80
+:10062000A2BF352129447FF0B3E2B1AFF7B3EA4D61
+:10063000E077E7F4BC5EE828A4E75D265821FA5588
+:100640002D1077A23C7A1DB42FB0C7CEE7EAFAC3CB
+:10065000F9FEE022B2C109F184F76A537008FA2169
+:10066000A30212F985A340F01791FF95417ACF2597
+:10067000F0C4CE4BD2F961DC45FF2E1DFDC3400214
+:10068000FA51A3CC1501E4F7DDD629E9E8D7E559FD
+:100690002765215FBD3AECBEE368825E4D5BBEE735
+:1006A0003935E4FF68FAEDA018569BBF2081EBA115
+:1006B0001B41DDA21F882E63381C9A3E47F2201C86
+:1006C0005260BEE13B2BE9E5A60EA0C78D0807E00E
+:1006D000A155620DA8CF0B0DEEC462F4D392020AAD
+:1006E000F7F7BEE98FF9C18AA637DE43782B703F52
+:1006F00004E35097F162773E62604F3F58F357B47E
+:10070000B840F367B4F813FD1EBC3F405CB79B01D3
+:1007100040B447018BBF06E67FF2B23ADC2DE456C7
+:100720008175548875CC64ED0417FBF6BBEF260188
+:100730007D66087C541C81B83117EF337633E0E1D5
+:100740006685C79337BB207E0CE3A399E322FBF8B1
+:100750009B921C1AE75ACFEBEDC044DDFECC3FDA8A
+:100760001E017BF409B8CEC7D6F1B874C240D9A730
+:10077000A0E11C9769407EAC16F60DC2E85EEDD292
+:100780004BC22F9E60E8C875017E5BF7FF8DECE0E1
+:1007900081FD7F7B07FDBCF19F2BCC0CEF4FF8BC9C
+:1007A000200EF5041BA7125F69E356FFA9C1CAF822
+:1007B00075E2FF2AB1F6C3008F7B28C267A1F677E6
+:1007C000179FDC84E37D794EE1BC2DE62F3379075A
+:1007D000611EBBCCC4F3018725EEFF68F70F1B0138
+:1007E0006EB8BE2941CB0BB493DDC79F398CCE3791
+:1007F000633E202F44D79B2F947FAEE4F6A40FFED8
+:10080000FE37F2015A1E60ABC01F3B78D6A4025CD3
+:10081000531BEE51D0BF9EEA94993B6CDE9B542B48
+:100820007387E5039E49D0F923075FDC3403EC4965
+:10083000759BEC8A42796DDA753C17FBEDB2CBDA29
+:100840000B1FE9F13BB5E91E05F9DF98A8927C5F23
+:100850006BFE0923804F6E40BA33F2EB3AC748244F
+:10086000477AFA1ED8FFEB848E9CBEF1DD17FDF5AA
+:1008700074F8DDC522DAEFB9163DF47CDB02EBF447
+:10088000C1FA02B04E1FF85D07D6D9A97F689D93C3
+:10089000FA1ABF5637FF3601FD368D4F4B1338DF3E
+:1008A0008CDFB72981D942F4D2F0F5A1B0577BA3F0
+:1008B000347FC3356F065C3A05768718D4C7DA9D56
+:1008C0006342F66BFEE932F23734FB355F5E544A21
+:1008D0006A53D82F4C23A35ED3DBA9B9EA6223EB7A
+:1008E000CD3E2D88EC97B76D5462A867203A4992A7
+:1008F000C087F0B33538CE300FC1A9A7A706971E21
+:100900001E6D7D9A7F3D5FD06FCEA04C23C2DFC3AA
+:10091000AE8A75E2409887B85EBBFAB58E9FAF5C31
+:1009200028792BB717BEED8B7FF5F7357D508613F1
+:10093000E451EB43BFC298984C742BBB6A626EB013
+:100940001B2C238A7D1A665758C550E29F7B851D54
+:10095000EE8B7FAAAECACC9B1FE22363E31356E45F
+:10096000A37DCA462BE62727DB66D5C6019E4AFE35
+:10097000543417FDBCEA0E03C3145669D31707316C
+:10098000AEAF7E8FB9502F1635B51623DF1D52DA64
+:10099000658AB3BF64EC89307FB1B1A9D68AFE54B1
+:1009A00063A24C71FC6107E74BEDFE9644AE3F1A23
+:1009B000CF5D9EE1EEE5FE1971BFE4E33CE2A3B238
+:1009C0004741AE310E4D8AA1BC4489649F53817E5C
+:1009D000C84D46F2F3218EF923EE035E6A34EFC26E
+:1009E000D47E69E323F7D88110F5FFFD698D19F3F3
+:1009F0000BB324D7B3F05C991A6CC57ED9DC4CAA32
+:100A00007B18FB3F32F9B3C15B25CA8B9401BB60F5
+:100A1000BF6C51A61FF313FB25DEF735F37D02668D
+:100A2000F725CC8079DEAE4818B581784AEB0FCE39
+:100A3000DBC0042387C557F7ED9549CFDC572AF96A
+:100A400071BFA9D49ECE7C617C55F6A889D635BBF2
+:100A500029A508F9784EB9CCFC61FC1D107EE13C5B
+:100A60000FC4E161EF1D8EE270051703DC52486E82
+:100A7000A7093E9FC5B89F387F4142C47BF0C62D71
+:100A8000688F6E6D8238157AD344FC7AAB373D623D
+:100A90005E0FE37ECD09162C8983F1FB250D24FE24
+:100AA0009B11B48F0EA8A877CE24A25E63C3B89C16
+:100AB0006872572AAFAE237E70F27DB279124893E6
+:100AC0008CFA2F529E668E8BECCF72F7A8378890E7
+:100AD0007FBD5ED7E47E5EB34CFB72F30A2517EB55
+:100AE000453FE8FDECB1D17DE8856FD587E37AD34A
+:100AF0000B1F96FF5D7AE135082BC681FCFE345151
+:100B0000E8877EAC1FEA875279FB26E4972EB07700
+:100B1000E65EF845B3175A3C5E06F24AF27E91EF64
+:100B200067945E4D65BEFC503CDEAD2FC09F70F5F6
+:100B3000E2E73C9D984572D4AD5F34FD11E64F1855
+:100B4000C7FCE3FE4429F891A63C842F83E02B6385
+:100B50003C1F588685439897737E41F9966A88F3BF
+:100B600029DE67BF25B850CF49F12139D0FB195A8A
+:100B70005ED72AF2087ABEE8CEF3CD35521D8CC678
+:100B80001765762E1F657365CABBEBF9449B4FCF83
+:100B90001F015D5EE69AFC21E4EC87F24773A2D860
+:100BA000571DC4065D0F5F68FCA0F187DE8E1CD365
+:100BB000E567FAB2236FA21D19DDB71D797D989103
+:100BC000F4B5DE7E68F6E277495C2F6724F27D8E0D
+:100BD00069C3E7D9D0EFB026F13A0DCD0E75E7978E
+:100BE00036737E78BD638922A13D41BD9019867F11
+:100BF000916FD5F8AFEA5189F28D15422F7536F312
+:100C0000FC5B7589ECB7C0FF16373DB189F78D9451
+:100C10009F2B545A150B8C3BD325B930AFE316F9F3
+:100C2000BA196E89E7EB5C91FBF42D3AFACE117C90
+:100C3000349305EBD01FD7EBA53957B95FA0D74F39
+:100C400073C4BEFB1CDDBEFB554DDE07B001FF4C7F
+:100C50007FC09CF4FDFE80F6BE46478D7E2AEEC521
+:100C6000A11C1DFCC6A4C670FF19E937F5AA42E312
+:100C7000D893045F0A7FE6CB8B79BFA0984F3C5F87
+:100C8000DDF485C93BB26FF8AFE5B7C6A29F3E3A27
+:100C9000E4B76BF34E53184B47C74C674F6689EB6D
+:100CA0003FD47E0CD7AD43A383A6477BE059E8D958
+:100CB000BEE8742D3DABE9B37FB69ED5C6D7EC80B8
+:100CC00036AF5EFFF615B769FA74FD1603E54B26DD
+:100CD0008BF878B2C8C3CE4FE2F1C1AD493CEEEC1F
+:100CE000FACA62407BB9B385FB272EB3FD38FA05FB
+:100CF000A17C1FA7E7C331CC87FBEC4C69B7D0BE02
+:100D000067119012F73DD3F8BEE77625E0213DED5F
+:100D100052580DC8C9397C0FE679F8806F21EAE98D
+:100D2000873F1962A0FD7725D08EFEC9D83C85F695
+:100D30008F1C6695F2C19DCD663BBED7B5EFFFB463
+:100D40001A719CAF980B43B843CDE6EEFD1BD40758
+:100D5000A5729B8CF9FBAE20C8083C3F6941A018E6
+:100D6000E3A0C9ACBD16E57B02D2B117FAFD2A4952
+:100D70008BB37BCFEF1737733FAE3846263F6E8A73
+:100D8000AFBD18F7ADA62892AB169FD5E5F75FD19A
+:100D9000C51FA1FCBEAAF0FA435DFEBE91EB99EB24
+:100DA000CDEB4F40DD067CBC5EE373A16F581FF9AD
+:100DB000FD9D26BEEF133C6964E807B30B89BDE6D1
+:100DC00063AE95E7DFD712ED5663719F8EFBEBFBA9
+:100DD0005AD2DC6A6EDFCFE776048BD03CEEDC3E85
+:100DE0005BA1FA35911FEDB17FD2C7FE88BBD17EE2
+:100DF00008D5695FFB21C55FAA94F6B95EBC697529
+:100E00000B4CD43FDDC8B49F9BE474E7F96837F21C
+:100E1000F9CEF3696E84EB79C1A71ADFEF3B77391E
+:100E20009AF6414D6E15F78F830E8BEB59E25BCE30
+:100E3000EFF5A943FCB84FFB1B21173BA383C7B2B7
+:100E400013C3F73DF83E47CBBA47679F33D27EB90D
+:100E500084F9486D7FD9077243753DF18CE20F2309
+:100E6000AB67386FAD9BFD1ADB2993D438C4FBE523
+:100E7000446D1F538DA33CC4B757A8CE508FFFDDE0
+:100E8000EB9807EB511AD6593C0AC8FFABEBECD4F0
+:100E90006F5CE7A476FF3A95DA878EC73E8076BF0F
+:100EA000DA6DF22861FAE39D64EE77E5657F524CD6
+:100EB000C5DF7F6354873EE5C10E19F5C58D5761C7
+:100EC0001D117527CA65C437E537B342FD4C6971FA
+:100ED0000CF66FBC0AFDB0E7AF2439B83DAA53EA5F
+:100EE000462793B4105FFC2DC9DD9104D7EF7178CC
+:100EF0003EC176B734FFE02546FD73BC7FAB7C096D
+:100F00009ECB0F14525E391FF3CA7934EC42C4DF12
+:100F1000E85613ED976BF9DD3C4DFEBE8ECC33E702
+:100F20008BBCEEABAC83F2CD051608B40C0817A74A
+:100F30009F5B9AE794301F98647261BDC3E82C4FA1
+:100F40003EE6635B9318C547ADADC9196A0E720FD3
+:100F5000CFFBBAB5BC2FFBFEBCEF918F627DA4B76F
+:100F6000AE9A687FFAC8A9585780F60B2DE4FF693E
+:100F7000F5C82DD1BCCE80652CA03CD38DA29ED1CE
+:100F800062F69A93495F050E9E80F77E7F99F17D08
+:100F9000C7F60F695FBBD8303C05EB7E0F4A43E3D1
+:100FA000B07DEAA3D81C6A4FC55E44FCB418AC2AD5
+:100FB000CE7B669D5A82756D27D6B112AC637B6B72
+:100FC0009D85DA93EBECD49E5AE7A4F675B88EFCB7
+:100FD000731C9E477E71BF65A37D92296FD9146CE7
+:100FE000F316C650BBFBB61813C2DB12CBB66BF3BD
+:100FF00060BD5A203AD080C9FED6A7BC8F59FA816D
+:10100000DD337B474AA3186B7BCA3B5D990CE34EEB
+:10101000EDFF93AFE0FE9BC9CB1EB3005C734FD9CD
+:101020001ADAA0FF76F2F2C76CA86F8F4783D2C39B
+:10103000F5AE38EE1E047443A590C605978D837EE9
+:1010400082D65F31BD641263B71477643360ADEC50
+:10105000E495D32D80C75BACDE1F63DFE44B9A5E63
+:10106000D20FFBCC87F56041C948713FCB9012B1DC
+:10107000FE65A6C3FB467258FD9E5BFA13ED338DE9
+:10108000714BCC41871F8CB4EFC5EC1F2784CBDBA1
+:101090004C47E91B488F89C9BC0E78F424C91D5EF2
+:1010A0005FA17F6EF439B504E934E642591DB633C9
+:1010B000CB1DD4F72C185B87F25C62EBEBFD627AF8
+:1010C000BF3C99D78D142952445D89FEB97C6026B6
+:1010D000F48F8347A3294F30FAB4B716EB4F4B9DDB
+:1010E0009979B2A6FAA8EFD882FB6DA32BCE9424EF
+:1010F000A0FCD824179A8931ACA32E01EE17DAB1DF
+:10110000A00AD7F54431D6FF8C562517A2ADD0DD05
+:10111000DA80EF17BA625C85E88F9F564BD0F49C5B
+:1011200052469D2880E7A60E925D1618E854E0A668
+:101130008997A05F382C8EF2BC85CA9A2B27A81FEE
+:10114000E3AA51711D5B7E5D45E398C9AEEF9E51E8
+:10115000FC2FC83F459E38CA09023E4AC2EBCA600E
+:10116000DD0477A15DF64749C8DFFF5A6287FEEECE
+:10117000FE1296CBC37CC3FF42F78F44AB5100E80D
+:101180006E93BD04C7DB6D92EC0F51DF538CCFFB28
+:10119000861855CC1F952546458C3FB5441A7F0EC1
+:1011A000E1CF891B85D7CA331C11F7DB6EB3929D43
+:1011B000A8782B87FCA2B6DBD2C95E54BC35A9083F
+:1011C000DB3603F7D32BDEAA28A7FB061E07572C16
+:1011D000FC915BF429EEAD585849FD5629E52738B6
+:1011E000DF959CB83CCCAF4D1B945AA244F88103C8
+:1011F00049FEF3447EAFD0307CD32480FFDEA37C55
+:101200009FA2222733E2F91905524978FDA86752B7
+:1012100054447F7689A324BC0E756E456A44FF96BC
+:10122000B99911FD92A30564BF410F5494801E38F3
+:101230000AED5260C1025107A5E59F0A054B15B69C
+:101240008BBCACC2E3EB61F0877AB0C41669A777B8
+:1012500047733B5FCED6D00649F911BEBF5D966895
+:10126000FC24DC4E94CB15365E97158987BCA346CB
+:10127000B2977931921FE3FA92A34BEBD0F49667C1
+:1012800044BEAFF961E5023E6D5EE673B7A33FA2CF
+:10129000C1ADCDAFC15F2E2F2AA17CF735D6A18776
+:1012A00097C17A503FE8E1684A16FE1AF81FE4AF8A
+:1012B000897324F04BECCD7E6BFE7A05E82B47B8A2
+:1012C000BEB2498958B7D797BED2C6EDCB2FD3C689
+:1012D0009DE9F0D0FBEE1D9F9E9A2087F5333F4E8F
+:1012E000880FEFBFF8E9A688FB491FCF7184F7B7D5
+:1012F0007E3A07EF4F51D45A1BF0E53126B97CC82E
+:10130000076DAA1203F4283EEDAEC3B6F4432F9640
+:10131000ABB2A9E77C75D84EBCE86F33C3BA6E1A7E
+:1013200026AB18BF6B7E881EDEBF26F3BCC3B1ABF5
+:10133000AA15F75977FB542BFAF3BB1F54ADE88776
+:10134000EC76F37319EE2C039D8F7167F37AC5BFAA
+:1013500024F3BA834EF1BED6FA8DDE4E841BEBCC5D
+:10136000D137A8FA264875E5C7D0BFCAE9E95F1D9D
+:1013700053FC369CEFD8837E5BF87EE2F5FA577F0C
+:10138000041E43380A99E409D723C596284FB8DCD0
+:1013900096DA1D11FD93C20F99EA4C8D78EF263530
+:1013A00033E239F01B87A15F526B62546FEB33F06D
+:1013B0007A5B3D1E57A4F0F8CE65B3A33B83FB6672
+:1013C000726FE7915CC5865ECFB7A5A4707FF03FD2
+:1013D0005218C1352B85C3A7AFAFD5F76BF17C0F82
+:1013E000E293B99CC8E72EABE10AB8BCACE0E927B0
+:1013F000A6535D6DBEE1DE2CE8573CBD753AAFAB40
+:1014000035ECC13ADB194F3FCFEFDF60C837823F81
+:10141000B0CDF7C274AC2BAF8AE2F5095551A23EAC
+:10142000B46E7444DCA3183E7E6A21C69FFB8D0C0B
+:10143000F3FC8F99C00EE685F6D9AD661EAF5A4D06
+:10144000BC0E7C7DE6A9F5A83F3E8BF2E6A5509E3A
+:10145000B148453C5EB45BA83EF4BE7DA529C807F3
+:10146000B35278DE2B7BCF44279D2FFBE7C151FC85
+:101470007D7060FD308E73717736F9E5D903189D64
+:1014800027D1E801E1335D8F82F081CE6330B7135D
+:10149000F36FB50E138D332B85F3E3F5B63DEA8973
+:1014A000E30C6B7641BB2085C7CDB7E2BC046FB0BF
+:1014B000FF2CDCD0B307FBCF1EC9FB486F59CE0B06
+:1014C000A27F1BFC510CEDC3BC1FCDF1C63282B410
+:1014D0006FF3EEA26CD706BACEF1B8C03FB0B643F8
+:1014E000C5FA0F7F3FACB718E8F42E457CDC66F6F2
+:1014F0000F26BEB2AD89C179AEB7DEB8EFF921E0F3
+:10150000047B327F3CA797363FE0D882747C579C9F
+:101510003BD1E001387E8C70687075C3A3AB3FEFA0
+:10152000147E7B278E971BCA5357FFC940798A6A5E
+:1015300009F424F4F77CC85C3E95E8437950DCD28A
+:10154000C2F9C69F58526C83B6A071158F8FDB9578
+:1015500088BC9866CF268AE7C7BEA744D8A389224D
+:10156000FE1DAFCB4F4E6C9C4EE7F826EAE2E25FE1
+:10157000A488BC651A4B0BCF23AC15F1C6E5B68128
+:1015800071E89F2A10E7CA806F932AB371F121BDD9
+:10159000D0B08E459C53D4F870E469FB9D38DFC809
+:1015A000D3EC0EF207B471BBF3131C2F97DFE37873
+:1015B00019D531ECE949D0371E3132BF1A5AE70448
+:1015C0000E2A833087E2A4CB176C645FC61C9D4350
+:1015D000F5DE66A781A961EB8F52A3991AA62FADFC
+:1015E000C3E223FAB2A04F5D54A41F902FE6897185
+:1015F000A5458CB73FBEEC08FA05F9B6E5E417C47B
+:101600008D1B18311E6B5322FC833CE67163DCE8B2
+:1016100002FAE27ED998D34A841F302EB091CEA12F
+:101620008EFB30F2FA847391FD037DD1A52FFCB1BE
+:10163000DCA7D12FFCA1F873B823F197501E89BF06
+:10164000244F24FE521644E227D51B898FF4E5234C
+:1016500022EEF75B9317D11FF0C08488E733C18077
+:1016600085F7B31E9D16F1FCE08DB323FA4337DFF7
+:1016700016F1FC70FF9288FBD9DB56FE207A8FAC06
+:101680005F1BF1BC9EDE3734FE34627C8DDE3EF89B
+:10169000FBDFA437730AFF50D03B51D859879BD743
+:1016A000AD75196D8FE2797C3C3682FACE81E7E91F
+:1016B00063D1FEAB5497E79BC6685FFB97B2474286
+:1016C000BD940EA8356451BD3CD5F5FDDC6088D8CD
+:1016D00067B73BB93F6477723DFE6B133F2F950EA2
+:1016E000FE26D929030BC5D916AC77648299AC8F35
+:1016F000639C5DE7E818A63A306F07FDC921BDAAD3
+:10170000E9D1DBCC6A6D07E8975132D793A03FFB54
+:1017100039619EF7A5078DDCFFF019D1FF48B7307E
+:101720005F6C1ED919CA433B58A284E700E2427A93
+:101730005CFD0E88757065369DC37A134140BF59B4
+:1017400075D17ED3AD9A9E5A3E9CF4D4655BA4FFBE
+:10175000767969165D3F7BBB99EA07CE8A3A470DD9
+:101760000FFAF3D6DA396CEDFEF22D9B62D0EF3C26
+:101770002BCEFF6AD7270BFC4D76CAC2FE59D66026
+:101780003E6C1118F138C07BE5918ED8DB18F99BBF
+:101790009370DD555BAEDCFE2AF4AB0DC1646E3791
+:1017A0007CF4DEFC77F9B9EEF97F8BFCAE408593D3
+:1017B000C7F91562FC5BA0B1039E6E013A38B07D9B
+:1017C000635219F2275CA7F371338F3023CAF32CCD
+:1017D0006F26D54D9C62AE337B01C4F94E95E09CDB
+:1017E000CB3C46CC5BBD737B650C3ED73D9E360E35
+:1017F000300CFA25EF3A7CC664CC1B4CE6751330EE
+:101800009F05AF7B16A53F8C76499BEF1DE6BD7407
+:1018100006E83B9BB9685C6D7C86E9F9303DB57B99
+:10182000F9AA8F1260BEB5470D948F58DB6CA6786D
+:10183000AD6BE57FED780AEEDF91DED10FEDF6FBC3
+:101840002BFF3604F9E1D6CD325381DEAADD7BA72A
+:10185000336C5FE5ECD22B31781FECEED6A7D05875
+:10186000BE6CA63AE2F757BE3C24DC8FAD74162E50
+:10187000C7F7D8B8EB3BEF58FCD2F014AAF712FC2C
+:10188000B442F0D3DA178792BFB536A69B9F787F14
+:101890002BAF1BD1D67146F0E3CA97BE89F8CEC4F0
+:1018A0006EE023D5CCF7C5D4A160EFDB2EE7D2776D
+:1018B0001F8CDE7F75C2BC2D573F89C5FE9E37FF4A
+:1018C0004AF0B3B9D7072FCAA26F4C687F5A3BEFD3
+:1018D000B9A029211FE90E72B601C7BFED772F5EAF
+:1018E000FA00F1D3FCF2D69FE133D779FE739796D5
+:1018F0007714F6C625F001F686E28B2E16CDCF932F
+:1019000008FF46C11DF92CFA9E874A7CED66C77117
+:101910001FA7B6D5407526B1B8091496AF8B950DA3
+:101920009A51725B9CA0AF859EF97FCEDB2AEAA814
+:101930003E20D21F2A38B432C20FF2C05FAF7ED031
+:1019400033DE5ACC2FE9FDA1F101C36253DCF7F875
+:101950004587A6F5EA174140ED96C688AD21F835D2
+:10196000E8F4F37E2157F53816E6FF03D1FCFC338B
+:10197000980EF47B7F9ACAF5B72D83F1F36952E78D
+:10198000300BE8CB16E7A2C71F856B96417CDDD8EC
+:10199000AFA53335F9C47FDD7ED7A111A4B7D8B781
+:1019A000301BE243E43DF4742BC0F3ECF961722781
+:1019B000DE0F1CFE6B2CE67D77C4AB6F213D8247AA
+:1019C00065DAFF89523A4C8E5EE2BB57510F029F97
+:1019D000CAA9DC1E581A797ED1A2BA19C60F51764F
+:1019E000FBA8F0737F8D4E1E4F561E7EBFBF09E8C9
+:1019F00071C9D0169B03E3AFDEBB3B16DDFF0C9332
+:101A0000F703E4C35567DF1E63A7FCCD96FE180FEE
+:101A1000D607F87730462ACCA7E4F584A37A332C8E
+:101A20002601CFE927503BB2297F19F2597580AFC3
+:101A300013C7C642BEE18D12F53B1B6BE371BCEAD6
+:101A4000DF37A7A13CBD9CC4E3CD97AE66F3F71585
+:101A5000A6E0F341A74310D36FC0F8E46511D77433
+:101A60005E95E9396DFE918D85B21DF82127B0F1A3
+:101A700000C5514D6615E91AF51CE378688A22B94C
+:101A8000AF6E99CAD0EE7739984B82FB3BA2837F29
+:101A9000A4F36ECD6615F3AD51F68D2C1EC6DF2175
+:101AA000F659870347E17929EDBA365F54D3D31845
+:101AB00073203F50DE374AD9C826DBC2F11C437879
+:101AC00076A4723EDA111D30609E253898B1670900
+:101AD000AE109C8CE6D5E01CEEC7F3843B4CC1F302
+:101AE000786E06E0B223FD87330E276B1AAA629E3A
+:101AF00020CAEEA67544D955974FEA0957752EF3BB
+:101B0000A35DFFF943AC5B6E518EABA3437D0BC865
+:101B1000C08E814CC8F9CF1F2FC908EF83621917F7
+:101B20007A7FC8AF363E5E3789E2099F8CF12FB4C9
+:101B300031F1B84E95D6A7608A298FE301F7DBAD66
+:101B4000167EBFFB79E06F1BF66DFC39579CDD3AC2
+:101B50004D2239E1F5B8421FDC2705CEDF08A4FD90
+:101B60002A702057055856BFB19FF87495A1E9A96E
+:101B70009170FFEE28AF2B15E67BED43039D6BFDC7
+:101B8000F38B51FE0AC0C7B07D5B92DDBDC8877E76
+:101B9000FC47DE7BE8C974A4FF3E49C53C6C973125
+:101BA00048DF37A96AFACC44F50D8D1F53DDD39B6E
+:101BB000A9DE4938CFB8C61ADA8F1ECF36D27E7466
+:101BC000B6380F5EEFE4FAE3F2E921CFD684E17F85
+:101BD000492A972F16F40E40B96912F2D9827E0A6B
+:101BE000B47B85BFB4B7F5D62C352C7F58C30EA473
+:101BF00023BE1F6287A8D5AE77F9F9B9CAEC772C56
+:101C000077B8C3F86F9190F745A9224F96EA9D8D5A
+:101C1000F0AE6AFDC414ABE23999FAFE6857EAC126
+:101C20009FB2F782976EB9D5C951B51234E1F3D599
+:101C300017F8F957A0731D9E3778F99DC6118BE1EF
+:101C4000FA5EC035D695FACE9AA9BE72AFD1938E00
+:101C5000CFD79CF93A17F556090201F07CDDBC6A32
+:101C600000E20DF8BE281AE56B17233DA6C9670EE2
+:101C7000CA27BC9F837C5F80FDE1A4877798DAF94F
+:101C8000F9D3BDFCFC29F03DC901F0BD1DFD861C4A
+:101C90003BC801BD3F94E47B47BB81CEC9FA408F6E
+:101CA0000FA67ED11CECEF682FB1937C635E3F0FD3
+:101CB000E5347080C6A987D8044927314FB83FD989
+:101CC000E88C25BA69FAF1B093093BA1C6E1790322
+:101CD000AB2C47C845983DE47D612F4FFC2AF0F8B6
+:101CE0002FD176B8855D10FE14F3E6939EBF57D8CA
+:101CF000AAB5AF4F98B91DD6B9F684DC5D3F8EFE0C
+:101D00006B40F0C901E1CFA29D5013783D0E5E1FDC
+:101D1000BD99D7D58E71AF29C6B3CFE3CA371EC4DC
+:101D20007682A7BE18CF3E4F5AD07E909F81E6E7BD
+:101D3000D91B0EDC948DFBDE5D67CD0CF75D1AFEC2
+:101D40001AFCE34B8087FB5B00FFBDD825580EF1E2
+:101D50001F58EC74E6EC79BF4BD2F4C7A90AE4C76C
+:101D6000CE0639D40740AA80C1B1FFDBD4938FFBE4
+:101D7000A09F95E67E3E15FDED742FB55D27FF9A79
+:101D80008CB660EF69EE473598DCD9C83F0D032368
+:101D9000BF1FA0B54FA61A890E057D7CBFEB482A50
+:101DA000CF6F0EF1B1C7908FAA1A64BB1FE87EA94E
+:101DB00041769BC01F3AEFF626E3D99C0BCC77CB3C
+:101DC00044B4F3228ED4BEF77217FA2960A7EEFE50
+:101DD00065EFFB0FAB99F65B6340BE5AD624B1FFAB
+:101DE000001C2C7F26F2F9D5DAF76A1AB71CC6EF69
+:101DF00088AD7C4E771FFD15FA0E46A41F7324553F
+:101E0000F827592C0BFD13E023D20F46851D310313
+:101E1000DFAE48F7EE437BFCB2F8BE02E85192C752
+:101E20007D4E615744FD417007AF2B1EBECD2F1B69
+:101E3000E0FD098A5F467BC5A0C57D87716E6F197D
+:101E40007D87C9E73E8DFB3ECB853E5CAEF9697E62
+:101E5000BE3F026637C24FAB16AB1FCFFCB5B1B861
+:101E6000FE6D12C5CBABB645EEA7548BF5AFDE7C4D
+:101E7000F2309ABCCA7ADD7DB1FE6ADDFAB57DF337
+:101E8000CF5323EBBFAE773FE42F46EE37BC2DC6D2
+:101E9000D1EE9BD2B87EAC826520DD56FB65BF9F3C
+:101EA000FB7936FC5ED09D625D770AFAD33AE1B9E0
+:101EB000CA6D923F803CFE78649DE95DF58BCB90C6
+:101EC000AE7A3E5929D6BD7CBB91FC55FCFE0FCAAB
+:101ED0009D9E3F568AF5AFD4ADBFCA2BE9E0E37EA5
+:101EE000744FF8EA6F413A576E37B2DEE0D3E8B587
+:101EF00052E3EB3EE0D5E0D4E0FEA1F0F64F13F95B
+:101F0000AD116C04D1A93CE1BAE8A4F773771D1EAA
+:101F100041DF5BBB7C6420C5FB1A1FE8DF2F137E0B
+:101F2000F2D4CDDC6FBCD4586C1D89F14C9BC1251B
+:101F3000A9149FC58E04BCE437CBAC02FA5D4D59A1
+:101F40009BF0FB8379270AE660FC9F7FC240E7EFA6
+:101F5000F61C29A07DE7FCA38312B228CFEDA2EFE7
+:101F6000E3C038645FBBDAF236E1F984AEB69202C0
+:101F70001C5782E7D00FC81376A2A62DCF1A7EFE7B
+:101F80007C4C1A8FEFD73B3FFD39FAE9537719E9BB
+:101F90009CC55463F04DACDBDA7344A17DF2D527C8
+:101FA000963C1485F47D51A27DF2C3ED6B1317228C
+:101FB0009F3519EDB8EFDDD5F4E30378DFB75DA207
+:101FC000EF5E54379766EF807EDE967C57F8F9B364
+:101FD0003C874AF0B1542BC5CF53FB19C96E5E4CF8
+:101FE000B3FE16FD9F95EE2D24DF17F7EF3151DD7F
+:101FF000DE0E89A1293BEC3CF80AE2E3E2AB274D77
+:10200000E88417379C34757C8F3F70C92FB300C5A7
+:10201000CD1B4D18C7546ED1FA1D26A49347F8471F
+:1020200055CF7D4CFD95E8CFC37C2B9F91A97EF7C2
+:1020300060F36B26E4E7AAED124BC90CBBBF598ACB
+:10204000F85EC312C6F96089D03FAB987F7D1A3C19
+:10205000B76A23AF5B608F46D6016BFCBD42F0F7D9
+:10206000AAEDB3E8FB533DBE5B8871E30DF81CE7B6
+:10207000EF659B23EFAF107CBD42C7D73F4913FAF2
+:1020800067381B8E7CFD75A11A9703D7BF3EB972C6
+:10209000406FE7ECDB84BDD6ECE5E58081EC8DFE9E
+:1020A000B9CEC62B046775DB6513FAA7654D5F10C3
+:1020B000FE2B9A5AA97EE466E65D8DF8BAB9C96A24
+:1020C00047B9AEE8E07A685A93D9EF97F07E3DD5EC
+:1020D0003977B5F0BA49DF7E89FC1C4D8F69DF770F
+:1020E0005C26F0B80C14787A1EFABB3C6EAE127106
+:1020F000F28A615B0EE33E7B95B8BFFAE8C158F403
+:102100000FA7B12F6E47FAC07C0CE763CF44E27D86
+:10211000BAD08BD3B773BDA8B76B5DA9D933298F5C
+:1021200009712AC2B57A7B24BEAB74F1F963693CAC
+:102130003FF6820EDF154166CD413854D9E5A7A799
+:10214000DB159CF7482ED85BB4936AD6F77E87F1EF
+:102150004DE1676BFD99E21C78BD7DA32D3C6E8E31
+:102160004AE7FEC2CAF1B20FE9D51D6F0C3A98AB2F
+:102170001A42F106C419CD69493CEEC08292373249
+:10218000649698188A371E716EAAC8837EF5762EDB
+:10219000F79DE3603C3C7FAD30F247ABB79BE99CD9
+:1021A0006235D09FE28A267E9EC2D3249522DDC16D
+:1021B0005F3F9A86FBB198528575CF6AE47C3FAB4E
+:1021C000E40BE297A383F87A2F2B6A4A6FFEBBE6F3
+:1021D000B7E3F93035CC7FAF0239C5E7AB9A783D2C
+:1021E00052C3816FFA67A29E6BFEAFFE8BA1FD5AB0
+:1021F000D845CD2F0C825F3890FB45F4BDC9BB8517
+:102200007C2DB3F37DBABB85FD61521DF17995B18B
+:10221000FE503CFA593B78BD00DB871F8503FDF873
+:10222000F64B75F1B0EECE9724AA87C3F7F17B94F5
+:102230009D4BEA3F41BFFBEB1D16F237EF06BF6532
+:102240004A5E4FB9D4E45BFB6E560D7B88FCCF87AA
+:10225000581DB595829F3B1B6BE9FBA09ABF42EFCF
+:102260000FECE98F540ABEAFD4F15F547A24DFD566
+:10227000BC1D4D7E63D751D98EFB3180AFDFA48565
+:10228000E345F8210D07A288AE5D276D6447FE2C5B
+:10229000F8EDA2C83FD78C93090F86F1BCCD6E79BB
+:1022A0006D20D211F18EF5F72FB7BC36829FFBF669
+:1022B00013FE576D9323BE0F5B591FF9FDD79AB7D5
+:1022C0006FA3EF0855EFEF866B88293104575F72D3
+:1022D00020493C8E3448917164F53ED9135E7706EF
+:1022E000EBB903F551BA9007A6049331FF35009D71
+:1022F0000680AFA689D3D5D0CC5B98FF169E273138
+:10230000D2FC3DEE17F956E3FDAF33AD7CFFFAAAE0
+:10231000AF02FBF70F94A9AEF3FEB7570E0DD7A38C
+:102320000CE104BA561B83C9146F9E34107CD52768
+:102330002F270FB2A15EDA5282DF0F9D2EF4DFE16C
+:1023400081D6E5C8CF3E9C372534CECB69BC7E8F85
+:10235000E17A9DE86DFC928F2BD6FB109B2DE26AF3
+:10236000CE4F39697CBD108F8C4BEF251EB95EBFF7
+:1023700013ECC3A98512D633293E8C87F7BCC7F569
+:10238000424DF3B28F90DFABDF37539DD7FD2DCB9E
+:102390008652BDAFD77B03FA1B5FB7ACB881F2831F
+:1023A000D24304970FE173A25F732619EB522B9B64
+:1023B000CF2493DDDD3B7A932F06FD97BCE9781D92
+:1023C000FC09E23FF06B88FFF6B415687E8C15C7F8
+:1023D000AD3CAA78103F95470B8E57A07F71A2A8FD
+:1023E00000D5B974A280FC987CF4636C21BFA65B15
+:1023F0004FA6733FA6AB358AF20B121BC8F9870DA7
+:102400008AE09FD50DAF93BD5FDD2847D42F6AEFDB
+:10241000DD99AED038CB34FEA997DCC41FBB78BBA6
+:10242000BA710FAD6F95B19EE85DB3DDC8EFEFE017
+:10243000ADF67D581F8BF7213E8EE325A0C3349364
+:102440003F03F3D3C732B99FAFA7C7E7E93CFF719A
+:10245000ECAC7700F2CBB142EF507B2F76C2C78A4B
+:10246000785C2B097C37F07353FAE73E4B97C477BF
+:102470004222CFB76AEDA974AE3FA7997AFF2EE04A
+:102480006FD2B57309EC31430146C546FB06E1D76F
+:10249000A7867DD761CECD46F2174E31FBEB58EFC4
+:1024A0003843D3B3E3B87DD5E7CBE789F73C9B55F9
+:1024B000BE5FA43B3F334F3BDFA43BEF364FF83BBF
+:1024C000F374FECED3E9C28F1FC286A01EAC17E7FD
+:1024D000EFD60E8FF287E7B3F4ED61B12F82E78775
+:1024E000B0AD19FE2EE57D8EB59E7D85EADDCE462A
+:1024F000B1813CAF47F9EFCA3EF2DF35DD723937C3
+:1025000082CF34BA5C12DF83D1D365B7A6AFC4BE25
+:102510005DB4D8B7F31BBDBB519E2B2D174DBCEE40
+:102520003068427D56339CFB4D974A25DA6F073859
+:10253000FB9BC3F4FBA5541E7FDD7F8B4479D756EC
+:102540007C1EE3AC7A89EABC2B03ED26E4A7210DBF
+:102550008B1F26B9F5B1D32CECBB1A332DDC4E768C
+:10256000D34F5B77B71D8BF7717D9C482D3E8F76DF
+:102570007186B083FA735143597B593AC033DF2DCA
+:10258000B9B01EA02F3ACF5E30EA7544C3F5D2BB76
+:1025900033DDFB4E3ACA79FBE55B308F7A6CF86726
+:1025A000FDD18E56F5C1C71F0B3CEBBF2BE31AAA1A
+:1025B000D6E2F7556A9DDE0ED29F866F6347301CC8
+:1025C000A7E3376B25A41323FEEF4B7E3E13E37E78
+:1025D00096CEBF770FB8A77D9755E9BC4EEB98D143
+:1025E0009F41798A9CEBDBF7AAD9F7462EEAB3CE56
+:1025F000D6A3B9A630BA5E5C0B7A00ED4AF3C1648B
+:10260000D516CE7706E23749D2F84F11F632920F3F
+:102610002F221FE6607B267610EAE35DA76207E3C0
+:10262000787B79DBCDAF4DFC7BF6101F0D9917132E
+:102630000EDFC304DFA57A3E0E631D43E68C0CBF9C
+:102640005FDB171F5B33888F3B22F8585B6F3D7E43
+:10265000CF07E38016337DCF07F3D78E3039199A31
+:10266000C1F5CF58F1FD9EF1CC47DF391C2BBEE3FD
+:10267000335E6101251EF7CD0232DFF7E5E72DC697
+:10268000087E1EAB045AB18E62BCD8E799C0DAE965
+:10269000B9292C48AD9BD9E91C451173513BCE1289
+:1026A000988EEE544E7D3DD525069215C7798B3810
+:1026B000AFD10BDD42EB57E8BB3DC49F329ED7E95B
+:1026C000FDBB2FB333B8DCD3C74590BE9718E5B92F
+:1026D000F07B6D38C9448595637DD3648559A2012B
+:1026E000DE5D870C24CF2D1DAA1FEB535D09E2BDD3
+:1026F000CF19D5E18E757379459383F518DA7AF59C
+:10270000789800E3619E6DAC029128E13140F3DDE1
+:10271000C8F8399242A652FD736946A6D0F7418A9D
+:10272000A38A218E427D6FB0F8081FD33354BA8F2D
+:10273000FB25B130CE848D127B0FF73FB2F87AB50E
+:10274000F1270023E0F9C2E919DC9E614AF5BD7862
+:10275000BE8F124B05CD2576FE9DA364FACED1F532
+:10276000E2B52B997FEF32F6CE60E7CF0A42FB4904
+:102770002EFCEE516CE83B9B2EEDDF830844FE7B84
+:102780001077642CF911F2A356AFC7BCFCDF7DD0E3
+:10279000D7EB85D5E7B10B61E7B0B5BA926DFED93D
+:1027A0002A9EF35B9068A173BF7996FEF968C7060D
+:1027B0003ABD34FEFBD2F6C13498E21FED8909F12F
+:1027C000BB95B9C721BE437583FC3B50DDE7AE9294
+:1027D000199D57B49A797DE563201FF81D26902E28
+:1027E00015EB68D883C5548FB9DE6171E17909337F
+:1027F000C26D0DC15D6B11DF05B5F07D717D3D686A
+:10280000ADCD40DF1DAD65D1740E3D29DABB2E0381
+:10281000E0BA2FA688CE7767EF9CE444BF317CFDF9
+:1028200093B4F51B7AD647C27A1FC9E8A51E515B3F
+:10283000A7F6EF76D805FEB475DBB5734A6E25E2D0
+:102840009C92868FC7A2F9BA8DB8F39F45EFAAA8CC
+:1028500037F4EBFDFFDC29BC16A06400000000008B
+:1028600000000000000000001F8B080000000000B6
+:10287000000BB3D36660F8518FC0C19A0C0C5DD2C7
+:10288000A862B4C41D120C0C9780F80B106702EDFF
+:10289000F5926460F006E26D40BC1D88C5A518186D
+:1028A0000280381088FB80FC7E204E07E224A81BA3
+:1028B000B30519187281381F880B815848808141EF
+:1028C000588078FB8B1519185EAB22F85A6A0C0CED
+:1028D000C91AF4F3FF60C381B6F4B5EF16D0BEE5B4
+:1028E0006E08BE0490BDC20D55CD4A37FC66AC42A1
+:1028F000935F8DC65F83477F810D2A7FAB292A7F37
+:10290000AF3903C3072435DB4CF1BB051D2B00FD9C
+:10291000A788274C9730A2F22732A1F2F9A17C00B8
+:10292000BE1E313CA80300000000000000000000B3
+:102930001F8B080000000000000BED7D0D7854D5C2
+:1029400099F0B93F7367269999DC24433260126E7F
+:102950007ED0A001879860B0586E20E147A30E0892
+:102960002CB440262888166DC49FC6DD500609BFCA
+:102970000921E14F70D11D105DEA63FBC5565B75FF
+:10298000BB7682D646AB3568D787767765A015BF0C
+:10299000BA761BD96D976EBBF57BDFF79CCBCCBDB0
+:1029A0009900FEECB7BBDFF3C5C7E770EE3D3FEF24
+:1029B00079CFFB7FDE73C725BB59701A631FE31FF6
+:1029C0009413731963B5A9B2C5C362D9398CE5767E
+:1029D000488CD530B6B25D89CF827F1676B4BC8282
+:1029E000F5E56D6EC35DCA58FF036E7F0DD44F6F62
+:1029F00057C26EE8DAA8F8A8BEACCB15761BF07CFF
+:102A0000EB472FE7E3FB8D5298419DB1BB199BCC5F
+:102A1000D81A0FFC13EACB2A921DF8FEDD2D52388E
+:102A200086AF99E99B04EF6F65FC7DF3038AC6646A
+:102A3000A8EFBBAD894D64EC961E98C5430DD9C770
+:102A4000BC3D63058C45F823D6B205DE57A6DE47AC
+:102A500058D7470AF46B8E399EEF9BF53E0BE07B0F
+:102A60002DF51CD6730CFF3185B14B993F783A1B7D
+:102A7000FE1D66E18F15281BF2191B9DC297B364DA
+:102A80000CA01FC5D85CC65CAC1CC6A9BDCCC5CA11
+:102A9000607D161EDB381E97354984C7653E46F5B6
+:102AA00077E74AF1074BA91F9B5E0D253C2FC88392
+:102AB00032C8CC4228231E96C806F8E7B65DF61E3B
+:102AC000AE7F034E359ADA2702F07E018BBA18C02A
+:102AD000F7672C46E56216A7F2CB2C41702C6543B4
+:102AE000252AD4EF52129B18CC130E45A7E3FEFE05
+:102AF000AEFED8BB12BCBFBF5AAA9D0225F3E5D1DA
+:102B0000BA2FB43E6B7E9545AEC37118935D113FED
+:102B100063E3AD751E66B18A20637A8F8FD3CB6174
+:102B2000D6CFA03EBE41D04BE3FB7208D6DDF33CCE
+:102B30000B633D049B3905EAA1AEACF806A8F73C4F
+:102B40001EAB47BC1C6B01CC43FF638D6E295A053D
+:102B5000A54B7745A00CA98C2980A7FA86F592028F
+:102B6000EDE646F938E34D4D665742FD704C52C5CF
+:102B700073ECAFEB314987FA78A83F28E17BDDC5DC
+:102B8000609C86865C57B20AF1DD334687B2E2B0BC
+:102B9000969001BFF5A64ECF195B4474355ED0DA2E
+:102BA0005C93F79B7B38CFCFE83DFBD3C7D67BC088
+:102BB000EF25457CDF8E1D2ECB417859D4DEBF48F2
+:102BC00065314F5E0ACF3BD7C10B770ABFBB0E976B
+:102BD0006D45BC1DEB53C382946DE3C3B8BD0DF0CE
+:102BE000FE4C951C560CE4B3220E7F85EED77DA9D2
+:102BF0007176AE83F697A5E06854A6F6133E4C4670
+:102C0000FC38B706DA57A5DA3F81ED018E3D080F93
+:102C1000F55B73D48BF34418CD33123DBCB04EA793
+:102C20007E83621DD7FCEF30EDD3DC861689CF2B77
+:102C3000E06BB0C36795167C238D7F4CC0658D6FAC
+:102C4000CDF7C4BA10958D4AD523F7E2BA8E687CC9
+:102C50005DF38DC77723FE8E78C231A83F79DDDF23
+:102C60008CB91786B862FAF3973FC370BEE50FDFE1
+:102C70008EEB7A2E8BD6F5D487675EBB910D9FF7CE
+:102C80002D81879F9E9B3F44756BFEB9A6344602FB
+:102C90003AAB34A5840BE8E558FD571EBED7C07A81
+:102CA000BF89F2A4D23C664A504E846168BF99FA4B
+:102CB000A78F419E554277E4C7490D520BB67BE280
+:102CC000C687BE741F3CFAA98BC37DC55F72B82F3F
+:102CD000BB7EED9308EF6537AEFDF93350BF02853B
+:102CE00020F0DDA537ED5FF377F0CF6F2CFCCBE55F
+:102CF0007B18C9855836C0916B4A0CF777D9F7DD38
+:102D000036B972EC793FC99542B33486FCB7AC4F03
+:102D100022F9DCDF08721FDFFFCC1D77237F3D2007
+:102D200099D4FE59771CE5C3311763288F971DF797
+:102D3000C6915FD8AA6524AF2396BC36F397DE0B05
+:102D4000E3BDDB60C9734EA7F41ED6F7AEF98BED79
+:102D50005743FF33A62B8C62D392174E3CBF2BF008
+:102D60001BA92F273A58A6265DE10CF4D0DCA6D883
+:102D7000E4767DC349A2AB6550B2343E9D2BF86C1E
+:102D800059C32F047FEA24979CF0BC515B589C895F
+:102D9000EE4E09789282DEDEC5FDBE0CE1835E4810
+:102DA000375D4A5C4993D3F0E78A4CA07A0C59FA14
+:102DB000962D76382DB9DD12CBB6E92B90BFFF8268
+:102DC00072B3B92DDFF67C6E0EAB9DFAE9E4F01F0D
+:102DD000480E27258207F42FED7F242EC5512E5A49
+:102DE000FB7387D89F4805A3F5FCEA80148FC1FECA
+:102DF000FEEA8858DF3E29AE4844AFE6690F8E0BE5
+:102E00007396A7F6FF76B1FFA9FDE3F8B1F095D26E
+:102E100073B99B9200428B2F5282F2DAE21F0BBFF2
+:102E2000FD7B7E5482FB57D856DA5D87701E508832
+:102E30007F3FAC3F598CFBF6AE0BF00AFD23871F9A
+:102E40000B305F0AFE1621073FE8007A81E712C2C5
+:102E5000599906A780DB857568777B83D4877CFAD0
+:102E60004B31AFD5EF475B66CC44FCDCD12331C49A
+:102E7000CFED477A97FD39AC7F753C3B8C53FCAA6C
+:102E8000B1387009C0B3A2C7BE9FA7B6DC1C40BA58
+:102E9000F9B02FBF00C7B97D6A42433857275ED5C6
+:102EA0000CA0B35966AF96CC40571FF66D0860FB77
+:102EB0000FD59E1BAFC179F629E1F530FEEA23A5B7
+:102EC000334D4EA744BFAB057E4FAA3D33C7007CB0
+:102ED0002DDF282779F05E9F323B9E417E7E5D523A
+:102EE000880E56B7B9655CE748F4F261878B2570A8
+:102EF0001E3541F81CA9DD077D2DF4BEFF81C21BE4
+:102F0000D07EBBBDDD45F2E2F63637D1D3EA0629E5
+:102F1000CEA414BFAD10F0AEDEADD0FB93A644F24C
+:102F2000C3DAAFDB05BD9D3C7CD52BA8EFCF80FC81
+:102F300041B93B63E30FB54B000F2BB67079747248
+:102F400077EED27B508E087D798718F7B6B862E3AA
+:102F50008F95EDD9B6FD8876E5DBEAA78FE4DF58DB
+:102F60008774DDA590FEBC65E3635A88E493DDDEDB
+:102F7000440E9B5490B22F4FB0A105D748297AB286
+:102F8000E8E7D636B03703C3EDCD962312D9A317A1
+:102F90006D67B6819D3971B89D69C99108DA67E599
+:102FA000293962C98DBB94E8D820C0F16B57F4B2BF
+:102FB000FC72921B0F48B54827FA6FD1AE6431A559
+:102FC00016E5DBC5CA0B5AACC547F0F75E07D0550E
+:102FD000067A9D817405F3CCECE9CF48CF33248386
+:102FE000C64BD1CD2D01E25B1C14E068F6985D085C
+:102FF000E72530B1B79A4AA6E4F15285FA668419FA
+:10300000E8E1D45A297EA894B7F3A13C05B8AE8173
+:10301000E7CD5D97C7B7496817C21FEACF366E770D
+:10302000433BD39F47CF4D09CAA2F6D297717F2E5B
+:103030000101A055F3F6380FD8598412689F7057D4
+:1030400053D75800CA62E827F3FEF41EDB05488E0A
+:10305000C769BD383E8E53A1C4D7A09CB1E878990A
+:10306000903B20572B55A0AF66961546BDD9DC5630
+:103070007E5EFBE586B05D7EDC5467D703734DBB97
+:10308000FCBF79F625B6F60B22E5B6F77FB6E80A5F
+:10309000DBFBC5D1AB6CF52FAFFA82ADFDD2D619F3
+:1030A000763FE9A7B9B49E35822F4782FB75212F61
+:1030B0007FE2B04FADB2E9FA44CDDBB04F6C9D3B3F
+:1030C000FC381427E6B0457D6972C5274B84CFDFF5
+:1030D000009B70FFE04F1F131E437CDEA6BF70B73E
+:1030E00066A23B4DF4437309ED2567FB138B619E8C
+:1030F000B47EFF26494487E7FA314FCF2F01E4160B
+:10310000E0E41C40FD9D2C5982FBE6CE35E8FD5DD8
+:1031100072B200EBBF61437BF3717F7DC962E49FB4
+:1031200066953D27E560BFB0C70DF38135C4DA80F1
+:103130003E5ADA7E741CED38C908B22558F7F812E9
+:10314000C8DFACC3F561D2C23BF0616F28FAA104BD
+:103150007048EDFDBF97F0FDF799817A98258B7245
+:10316000D17FC4A9D2F9B069066B457C9D68B4E3F0
+:10317000CD2BD6F17349A676CF31F3B7C8472725B3
+:103180009DAF4FC0BB4D32CFE27C16DCEFE6EA1AB2
+:10319000FB74702B722DC2FD23827B432B4B662B5D
+:1031A00023C37D0533DDF2A8E1F09C656656A6E7F2
+:1031B000B3805D333DBFDCCD2AD15E3D216585D72F
+:1031C000976239F48F5F03BE8A7DC3177EDC184E89
+:1031D0001753E55C9ABF59D8BB85ED52221BED53BE
+:1031E000E621FB95F53C647A50AE0911D7D2269DB5
+:1031F000C4F5B38E4633E949AD9719124B6F776E1C
+:10320000DFDBDCD4DE923796DCB2F069C9154B7E89
+:103210005978758E3F929CC1F1D43C843F3A494E17
+:10322000A7131DF03101E131AB71FFAC7D033732E3
+:10323000E6A91E79DF2C3905ED18FAFF23ED17E01A
+:1032400089EC3A5798119EDE0D0E2D7D0AD63DD0A1
+:10325000C6F5F5BB458CECC3336D570DE4207E3CC1
+:103260009E0AC44F219F8A150687D6A17CF5A9899D
+:103270007E84AB50E82F2FE3FAAB90193BAE46FFAC
+:10328000BEFDE4126C67ED4FAED89F66D81FF447C1
+:103290009A7D43C56827B951AF413B37C85D94CB90
+:1032A00085EDEFFF07EAC542875E4448583A1C594E
+:1032B000553BAE36D2C7FF6823DA97D6B8D4217D06
+:1032C000FF83DA49C46F61FBE6BB95806D7CE963DF
+:1032D000C48390DB68769D9BA714ED5539E10EA45D
+:1032E000E8C20997D56F243A61E9F394DBEA644FA9
+:1032F00038EBEEB06693CFEFFEB13CA7D5771E7AE0
+:10330000738EE7A46F271F083C7C0A3ADDC4E9945A
+:10331000CB058B6FFFB3E8346AED6B2CF78E23A8D7
+:103320005FBBB4F02C03ED84A11F723BC16D1C4246
+:103330003A8B495995F03EDAA192DD68D915FD6BBB
+:10334000FF7A4B193C3F512B931F71623DA7FB3D08
+:103350000F707BD4D2DB51A1B7D12E40BC82DD30BF
+:10336000E0E6A507C7F1AFBFB95402B83DC650BFEC
+:103370001BDBB71964AFE6D4C5F54628E315873CD7
+:10338000E38C945C4AC6F2F396C37E7D2BD7581625
+:1033900021FB3A3A7AAE3FF5FEC732D74FD34A58AF
+:1033A000DE6C182FB9550E3F08FD932EBB1EB3CA15
+:1033B000350AD797492F2B413F78A476438AA557E2
+:1033C000758DF665FEC071DCA791F6017640A738D1
+:1033D000E6393AE478877968FCA4DFAE874E0A3D87
+:1033E00064C1FF09F4EAC262A08FBD5266B83F1201
+:1033F000E3459F030060BFA32A3333B573AEFB1FC1
+:1034000044BF84ACD27C3B2A76CEC6FD8EC5947078
+:10341000FA7E58E55F285C7FE6CC6DC86D84766CDB
+:103420007DE67679A2DD63F7652D42FF0A50A7623B
+:10343000BC2614D3E7CDC678E4D4BC49E863FF18B2
+:10344000F50FCCBB3B72466FF17D227C14849491C6
+:10345000F1F1A62CF37D74F0ED1E70D7507E262579
+:103460000FC55F5A62EE8C7C6CC929A73C72EA39A1
+:10347000C934595BF570B9628DFB49F519C8872CC1
+:103480006554CA6E3FA7CF2E961E47900325328BF8
+:10349000F665F04FAF56389EFA633C4EA19A32E97A
+:1034A000AD994A1393004F1B828CE4411EEE35F216
+:1034B0006D038B030A583E0B0FF8509E046596204F
+:1034C000BFD5E9079A4DE8070639684C1F55D65F06
+:1034D00008CF83F357D239038B7079ABC37F9C8FAE
+:1034E0004CD2176E81D7686C12C539F39AEC72DC36
+:1034F0008D7E20C847BDC1F17CFE4C3A6F70B3B4DD
+:10350000E7B08EAB147FF03498F6AC9AD5207F5696
+:10351000EFBF6AD76218BFE6919BDFC672F2C17B2C
+:10352000F2BF0465DDE3BB6EC6B2E4B5E8D84CF18A
+:1035300054AB044E61721DC0E763863B67E476C6F8
+:103540007A25827635EC6307D24332569E85F4BDE8
+:103550004AE1FCDFBF400B607C46DDC2E5AA3A1FB2
+:103560009047F4CFFDF4E6943F4D7E852AFC24A5D8
+:103570005DA13842522FA378CBA12DB28625C8D9A0
+:1035800018CE63CDDF2BE2D49D22DEEA84AFB76490
+:10359000A818E5E089F51F917DA8E859E1D9305FC9
+:1035A000979F95101C225ED02CF62FB9B6DE931E85
+:1035B0002F52849FD37174CE80817430A084BD0655
+:1035C000F18D86E346B74C67187F99A58719DA1302
+:1035D0009DC2EF517C26C37DCDD6D94CF46BE195CD
+:1035E00016C2FE552C9CC0FEEDFD885B58AF793BA2
+:1035F000F2C10FAEE576C88952BBDC0612EA823D05
+:1036000065B38AD6AB489B4DC1495721CDFF5E2992
+:10361000107295D3EB1BB5531EDB0674F09CDBBC1C
+:103620004719F509F8C821D77F006C82FBF6A8641A
+:1036300097E75679D0C9476D12D985AAC9D73953AA
+:10364000F9B011F5E446B01B0B8DE1FCB2F1754603
+:1036500076E346E0BF586926FEA99650465C2CFFEB
+:10366000E4B5E74A18C7F8ACFCF3978A38A713FC0F
+:10367000037496403BE651C9E89C02EBFBCEBEC604
+:103680001F4F81D7CF1E58917D0D94DF8B6FBCFEED
+:103690001A98FFF6C7F764E33E3FFA2AF0D379FCA5
+:1036A000788B9F9AD1863D4F9CCD586BE727637DE1
+:1036B00005F1D35B0AD75FFD0B7EF7C6D5FF9F9F51
+:1036C000CEC74F6F2B409FD3FE74B6387A1EF9D603
+:1036D0005CC434B4B7A08D89741E0DDA4B9F9A4533
+:1036E000F85EE7E272CCEFF272BB23C4DF3BC7FBAC
+:1036F0001BF593C70F16947F763E5DE7333FFA3C88
+:10370000F81DE40EC99B13E3EC7CDFE9E274F72BB0
+:10371000D7275EDF3B5FF81CD607763DD977D7A960
+:10372000CC403F60E20B1E1216AF8EDB780459626C
+:103730001A3C0FE5F1F7EE3C929771B46386944A18
+:10374000EA6F326EC737D56C3EC2CF25062B168185
+:10375000BF3C07FE85F6C8753EEE57C0382C04E323
+:10376000AFF6468BD551341EF997AF3EBF2F88F286
+:10377000E5758F5982CF5952CDC5F301CBEE18991B
+:10378000DF55763ACDCF7A5A6304C7A94B358A57AD
+:10379000A2180B407D6BE9A514A764E1D87109EB71
+:1037A000A37486725C094616931DD2E63666417D87
+:1037B0002B1850B120D12DC94DA5BD37144039006B
+:1037C0007609BE5763733D1AFA2FA3640C42337710
+:1037D000DB47E4779F28E6F2B6630AA3739A810772
+:1037E000FE6DA98CF64EBB9BCE2DC06E247E8D0A3D
+:1037F000B9910C4E0FB5A09F51A48525A86F8AFDE5
+:10380000E2F8D7B83C313D93D3E3233CDED112E25A
+:10381000FEAED3EEDBFCF5CBDE3470BC1FBED6753E
+:103820003994AF3FF9F3D72F87776F7CEBB51A8CBC
+:103830007BBBEB345BDCD1CD8C37D1DE029F29A181
+:10384000A17C8E9D5C829B99F2EBA418E2275AE33F
+:103850008FE37A91B7113FC9290A3F5F84BF10C037
+:103860001710F075074F55D13CB1F7FF2393BCA754
+:10387000BFC9428F40BBCD79F7C7518EA4E69B44A8
+:10388000F2290AF209FDC8A8AF67C91A9ACF1F7EAC
+:1038900010FBFC11767572EABCF0D096792D88E7A2
+:1038A000B90B3C3AD2993BB6F96EA473E73ACFF81C
+:1038B0001EBC144373B6F9814FDC159AE925FB97BA
+:1038C0001DA6FD104D2CB8755020187780FECB56E4
+:1038D000B00CFD0DE88FEB047986F6B6D50FC8D88D
+:1038E000C4F59EF14DBF94E2FD225E61F5BB292631
+:1038F000D139C14DE5C006E5C3F1B4C127FFE46B82
+:1039000078EE12537485D341A8220D6FF8678F9B10
+:1039100071BAB86C9F5DEFC2FC0B4BF17D4C217A04
+:1039200071F2CBF8B8BDFD06DFF9CFF587EF27C7F9
+:10393000F344C16F567F0B3E8257CA145FB79FCBCB
+:10394000DC5467AFCF1D868FF3C3355DB59FDB3485
+:10395000F8ECE3CD0CDADFCF2EB2D73760FCE6937C
+:10396000ACDBC1774F8F31BFA37E06BFDE92BBEFCA
+:103970007B227F4BE3A86186E3F42FD83B7F1ED0E8
+:1039800041A1CEED8EC2F90B1B726B504E31916787
+:1039900092D9FE2814FA5E697F49C9417FD4E4EDCB
+:1039A000934BDE9A9183E7C5758CCED3A3EA3DB1E4
+:1039B0001C23658FF4ABE55988E7CFDF1EB9DB9B8D
+:1039C0009E7793B2471E78D5A8C9608FA8F748267E
+:1039D0008C336B09D82355E9F648AB8432287B0930
+:1039E000D823647744DF437C8D6497FCD8B2EFFD25
+:1039F00099EDEA3FA85CCF829EF9A7CFA267C6796E
+:103A0000CD7F513F077B605A89B13292810E3F5082
+:103A100079BCC3D29F8DC1848267E7A03755173C1C
+:103A2000BFB62EF9128AE30E7D6710D70DEB71B980
+:103A30006A3FFD7ACEA81C9E892ACF8319A9DFB7D9
+:103A400046F057BC9A57D82DF6FDEE5FF08E2EA3A8
+:103A5000FF027E0CFA2F495FD9368C0B9E89A91480
+:103A6000AF53E7AFDC3D17E909EC6C4ECFE7B7AFDA
+:103A7000AF1D926D7C3CED6C968DEFEB99FD9C6ECD
+:103A800086C77E4ED7A8DBCFE96685ECE774730C5A
+:103A9000FB39DDF595F6733AA77D3F73B4EBBFA70D
+:103AA0007D1F6A64C44F17B0EF819F6E427A1A89F6
+:103AB0009FAECB37EE8F64D8EF6A8DDBA9ABBD919B
+:103AC000054877D30C6ED74563EB291F302F0AF2D8
+:103AD000A694E28614F7B2E25A56DCCBCA0BB4E2E3
+:103AE00059CEF89515F7B2E258528CC7AD9A3DD130
+:103AF00015086F73FB4919E588FE1CCC838C609D0B
+:103B0000E30D8BCF7179D0D29E392EE78CBF8DD843
+:103B1000EE53F2D5E7A01FD6E37A2DFD007CFEE040
+:103B200067E173905BDB70BC7F417E1F45F2A49B15
+:103B3000F6AF02708D763AEC838671FA05A7F763CB
+:103B40003C4E3DEE26BEBD58FF17131D64D8B42869
+:103B5000F8E018CF8AC64A49BF587C63F189D33F41
+:103B60001EC61FFFD5FC7391FE31F0CFF75CE7D185
+:103B700047C01FCF23BEA75572FC3AF9C1A27F20D0
+:103B80008984548DFB1D4D607B8BDED98B6113E1E5
+:103B90009C28FC9A13A335F22F4E3CFFEFFC1CF639
+:103BA000794F789C5823BE9FD85D10DF569AE23338
+:103BB0008B9FDA3DD11FBBD2F240AC7CC7C31EF352
+:103BC000757C1E52FB12E8AF8466B3F00683F8ECF6
+:103BD000187FCEF9D41766143FFDCC7ED95E571CF2
+:103BE000CF875AA4A1A58CFC56A621DFAA429EBC71
+:103BF00098153D89F86C9E1E29E1F43434CE077087
+:103C0000FDA243217FEDB3F253F348F83F878FE8DD
+:103C100090AB76787E40BADC42F9160A69F10D5213
+:103C2000067925F01567E131B83ED8CF7F473CE6ED
+:103C30005531899623F8B8D963FEC1F5D9EC0F4503
+:103C4000AB4DF131E0CDA3A15CAC06BC950FC7DB59
+:103C500049175FBF93FE426A5246FA0F811CDD206E
+:103C6000A59D930ABC58EB19493E5B749A76DE1009
+:103C7000D2D2D7FBFFA85CB6E4E5E59EE864DC079A
+:103C8000B71911F2CFA4FD75CA99E176904CE78C73
+:103C900067C0EEC16E172B5FA79DF5E261099B7AA5
+:103CA00056A1F2DAB37478C2BE78369B4AF36C3E02
+:103CB00095F56773A99C7EF6122A679C1D4D65C316
+:103CC0005900064C9CC6B3A554CE3C7B0595B3CE9B
+:103CD0008EA772F6D9ABA8DD9CB393A8BCEEEC1707
+:103CE000A8BCFEEC142A9DF68FB15E25F96DC92F94
+:103CF0004BBE3BE5B725FFFEAFC9EF58C345D93FE3
+:103D0000A0FFBEAA9D477E8F242F80AFEFD3D2E5C0
+:103D1000444A3FDFAF7D06BE3E2EF814F8F73D8CD7
+:103D2000C378C08BA3385598C7A9028666609EC623
+:103D30003E6C025BEA2F8D9CC4B841F3028F1E03D8
+:103D4000B8074A35924FDB821A9DBB6D96F4D15C61
+:103D50001E2413487F3B431A8DB7ED8F8A17F31744
+:103D60005E1A5510C079BAFDB28EEDBF959BDC7717
+:103D70000B9EE34F61E14330DE8A3D7B3CE97EF8F8
+:103D80007E340E00BE40EC69C680AF378EFADD523D
+:103D90009CCF3795513C064A3353BED837DDE27C81
+:103DA0005A1D0A219EB6FA64D207DDBA47E4A1265D
+:103DB000075AD0CFAD93D9369877C3E877B620D8D5
+:103DC000EAB8B21D6550DF5957E6C54D7AFA950F2E
+:103DD00042644FC03B0405CA8428CD1CD89F4E6F57
+:103DE000D838DF799B620CAD4362C5FEEEEA91DB09
+:103DF0006DF20F84903E3A264DAEBC05E6EF9D5421
+:103E0000301AE7DF5E73D4860F45B7C753140C38FA
+:103E1000A21F5E97A4B8DA06D9D85106EB0B887CAE
+:103E20006B00B33292967760C1A184611D1CAE8491
+:103E3000C2D7C30AE0796E5D2296E4EB3531EEEA33
+:103E4000F32543E82F2A75A729DED6E94F2EA2BA1B
+:103E5000030E6BFCDF6A565E00E71B9FE09BE649A2
+:103E6000DF5E4479E4551AED5BB76B6801D6636B8E
+:103E70005DECF10CF19B0D829FB7559E3F2EA3FA8E
+:103E8000EC70747BEDFEA205CFFBA274C2D1EC1ADC
+:103E90001A9569FF3EEDFC175AF7E73D5FE708F911
+:103EA0000397BBEDFB1010F2BC79CAB743782E6EB6
+:103EB000C1D329C13ED47CFEFBD03C85CBEBCF7B6C
+:103EC000BDFFD3C6FDBDC6E32AC0A7B3CB31CE38F4
+:103ED000667208E3B53E2B1E1D8E537E5200E3D161
+:103EE000D4CB203DA4EA7C0C456509E44339FBC3EF
+:103EF00004EE9352AD190AC9D9CCFBAE8437515E9A
+:103F00009B933F2DB8E96FB2301DE8FCD06BC5A77D
+:103F10000D7532BF2F81F15F8559E7B33C3E6DF5DA
+:103F2000572B648A4753203B6D1C15F4309EE328C1
+:103F300018A7CE1B3EFF7753F4689FBF88C7C715ED
+:103F400095FB81EF491C1FB15715CAF7EC7A9ECB40
+:103F500037769C91FCEEAA35E85C6507FC8FFE4342
+:103F6000ACD61747BA551CF978672AA787508E5ADE
+:103F700071719A8F9F0F509C1BF314296E6EB00ABB
+:103F80007CDF2D40B3C651ADB87CE59A49D8CE6FE1
+:103F900030CF73B03E7F1D4B5C02F006DDAD5B2F72
+:103FA0002FCD100FAF5CF38D2761DEDD4F4DFFD5B8
+:103FB0009350DF25875FAD8376F95FAE23BC3AE38C
+:103FC000E1DB2A655347F9E0F31DC27D051B9AE842
+:103FD000E2D61E2986CFB37DBE837CBF5B430AE257
+:103FE00005F424E2C5EBCC8B4CC77719C2B17360E2
+:103FF0001EFCDBBB75DE329C17E1C6FCCA15BDF5A5
+:104000001AEA99E012FBF985BFC95EF756D9E1DCDF
+:104010002AF6EF42F4EFCC43EC31E72D42BA3D13E0
+:10402000D418CA9B8D6BAFBE91E4FE76858D2BCDE7
+:1040300040BF8E75756A2ED2FFDD46FDDE0AD41BA9
+:104040000D1AE5F574C7BD714CF1DE5E973A37B1D4
+:10405000D9EF86C6CFB16AE4843B931D2FCEC70249
+:10406000E219739C8375CF96C9AEE9EEE1F358E38C
+:1040700075D7BDE5413931D2B84F8F318FB8D19E58
+:104080008AE65DD4BD8BFB36BA385D4FD1E252294A
+:10409000DAA3FAC24550DF3C4E267B8809FFAFFB0E
+:1040A0005A7E9EF8B066D8EE576C9AB292EC869B18
+:1040B000DCBAE02FB00B27A4EE5B1CF09A2FB8E11E
+:1040C000B9FA1C8C04F6C07BB9E11B912E1A831F30
+:1040D000911D756B91AC237DADD8D348EBDAACCB99
+:1040E0002C8176AFDA4A466A136B35F13C00133502
+:1040F00091EEE6C01B99EE45240F75029C73C61520
+:104100004EDA063577512BE5B1341A12F961D70131
+:1041100066501EB4144754A90AFBCD7F07EDBE3983
+:10412000C15219FDFDEB54D6A0A5D9E760171F7346
+:10413000A7ADEBC4B83D41B90AE7877970FE451ECB
+:10414000BA4FE046FBF8CA947D3C1111996627FFEF
+:104150001A8D4A8C6714257E4F79DEDF4FCA382FBF
+:104160007B81556F933EB95F0DFEE52F713FE3CC28
+:10417000E8C754C3CF1A97F8BA26F649DC5B39EC86
+:1041800089FC06C7B7E20113357EBF79730B0BC7F5
+:10419000D2E22A9B9FFFF3E368AF5AF197737977D6
+:1041A000024E0BEE4D12CB223DEF89FEC19DEE1764
+:1041B000B364D9DC099F1FDC19F2E57CB5C04F63FD
+:1041C00005FFE4D55678516E8EC57C1FDC87762EB0
+:1041D0004F4CF82F3DDF4711CC170CB7F6CBC6700C
+:1041E000B9A4887B5340D712DAB1CE7C2005F37E88
+:1041F000260E971B0704FD5FE211F93F93D964EE89
+:1042000087DBCFAFFC4BB9DE67AD7919EFA17E5FDD
+:10421000E8FD17855F9910F71A8F8A7B8B2FAF33D4
+:10422000C8CF7B655D259503EBC2F4FCB57575546D
+:10423000A6EE57F179F3851DA662500DCFF97D2CBE
+:104240006E00BCFE516B064A91CFEBF8FDEEEEA678
+:10425000535BCAC96EE4E7169B8BAA1385E8BF00BF
+:10426000ACF95077F9FA3CFC9E97395859C0D51CE7
+:10427000E2FDBFFABCC24917BAB5FF8EFDF6B156D2
+:1042800086F22E60DAF73B3BECF46FF8FEBB8A2E29
+:104290006EDF7BF11FB08F5FB2F6FD6A7635FF3EB1
+:1042A000C3C5C963E4A34A2107C6003F1D007FDEE2
+:1042B000ADF07CF57C9EE76A8638BF992AAFC7C609
+:1042C0008BF62E4E426C208FE7B517F3F304EA8786
+:1042D00079E5F81EC3922FF0F816CB11F9EF63C5FC
+:1042E00038ABC5B813ABE9DE2E3FFF677D3A963E8B
+:1042F00096A47A2EF0019641D62A2132C7B041F217
+:10430000B78BA521AA1B929E85F532295CC6FDF0CC
+:1043100038E9CF72C5FC7605213F22F3785172311E
+:10432000D993A097512EC6D5C822942F1BDAB4304A
+:1043300060E25C9E1CDE9FC372435FCD009E7FC423
+:104340006232C91FE53996A55F49F61EE9AF0DEB4C
+:10435000F30E6653BE4692F2DCF77B4A6D7A6AA290
+:104360006FE1753AECD746914FE782FE2C43FEA9E8
+:10437000954F07E396647A6F951BFDDAA24C7EFF9A
+:10438000C31E49C43392A3290E28F6353E55CE7874
+:104390009F719F87DB358F9666B6A7197B90C6DB2A
+:1043A000EFD11DE3265BE8FE8CCEE31B592E93F282
+:1043B0006B36B6F17BFA16FE46835D8BF6F0C6BE11
+:1043C000F9B391BF63952AE59BC3FA7D883F97C8EF
+:1043D0004BDE383E78309BC7254A514EF723FE6AA4
+:1043E000D3F0175CD984F8EB7895E7F7823EF7B104
+:1043F0000CF98616FE5C3EF6C54CEFADB26394B682
+:1044000028D3BDE1A31ECB4E4F96723AE1F8CBBA4A
+:10441000568D646A9F10F82E2963D1F3E1AFDFA3B4
+:10442000DBC6B5CE7D9511E25D922F4171AE891A42
+:10443000B733362CE678DDF0FC35C7A369E710BF4B
+:10444000C421A7A4E2C156DCD8D29BED9EE83F7AF6
+:1044500046A5F425FB3E23B9CB5EF01CC47DCB7092
+:104460000E71CA539BE11CA2E7E2BEEF3256F0ED9B
+:10447000A12D47E7E13C7F55C7C8BE0A3CC3E7CD45
+:10448000D5595C2EC5EF149812C659AE89E8F56867
+:10449000BFB9DA9989F9336345DCA6B0BD4F41BA9B
+:1044A00008C25E164A78AF2919C3EF998CDDCDC8D2
+:1044B0004F540B67AE5A6F08519A961FA5B0A17E54
+:1044C0005A5FBB663C5E4A60FD14F5C318F13ED0EE
+:1044D0003EF3572837C744A294870BFD627EB42F62
+:1044E000041E0BBC9C6F9737842509DA0783498A21
+:1044F0004F3AE5FA18C0CF2569F65B40D4D92A2E89
+:10450000A765F80FF57C7EC42EB7C739EE45071CAA
+:10451000792FB95E91EF6EC9ED22BEA913D441394E
+:10452000935F9ED2AF0EF8508655A7FA07ACFA6794
+:10453000840F0881E8D98207AF52A2DCDDE3D2BF45
+:10454000F214EAE77A8DE79189FB72D902EF3E74A3
+:1045500098A1DDC094574CDCD71D61FE5D9A3353A2
+:10456000E7911F9A5D67DDA7E3F795A18C619C2E0B
+:104570005BCC6FDDABCB66C69BE5400FD96692EE98
+:10458000D5E9D677154C96C03C1CDD27531E9DEE11
+:104590008B907CEA59E0D1F13B1F9AB8A7E712F75C
+:1045A000C7B3CDD374BF2E7BD8FAF8FD3A0BEEEC2F
+:1045B000ACAA37CB0DDB3CEB31BE0D6B1F9DF17E02
+:1045C0005D1DF793B24D1E87481B9FEED7ED985A9D
+:1045D00066BB5F47F3A01F27E8CFBA67E784EB5CB1
+:1045E000BF9ACC76DA84B0DD8EB8D0FD3A57C8DEFB
+:1045F0007EC705F2B33EF1FD3A818761ED1CF6A05E
+:10460000CBB24347C90CF7EF4C834CDF11C9FD28EF
+:10461000199921515C82F4BD65E7E5F1A1FEDBD972
+:104620007979565EBFC3CEB3ECB7DCD9767C3BED6F
+:104630003E775584FA5CAC9DB70BFF01F4F290D73E
+:1046400061E73565A60FA7BCC86783BBAF84718ED1
+:10465000D6FE48C17CB55DB9FCFB476C987FF0D6AF
+:104660000CDA171FFFDED1AE29FD2A7EFFE6774B5D
+:1046700019D949561CC12D60DE5524AFA7B07BD790
+:1046800043849FA0C043137E80AC8670151F477C77
+:10469000667A316F21BF8951A3C28A30ED3B7E9685
+:1046A00040A64B5B3115F5783D62250D4F333CF646
+:1046B000EF0434EAF98E7DB4EFF3B973F007F9F73C
+:1046C00014E618F67DB7FC24346771BEEB2BED744D
+:1046D00070428A0C2AD0E5E9AC5261FF0CEAA82F9F
+:1046E000BBD7BAC86E7C6849D9D62BD15F0DCA3A00
+:1046F0003F8E1C1A87F651F351D38B76DEF6C874C1
+:10470000EF3878FF50871246F3F0A9256B5EC57A23
+:104710006CB78BECA0A7FAE615AC48E3BBCDBB1792
+:104720002C5C8CEF3B5CA4DF57ECB96FA03488FDA8
+:104730005DB5E9DF9B6AD9789F8E7EDB1BB5DE8C89
+:1047400076CCD559DC2ED9A82529FEB4719EC6D0C9
+:10475000E5DA58523F7A05DA0FD76819EF93DF95FB
+:10476000E5E6F7F95CAD12CAF7C268E67B0156BB15
+:10477000B135BFA5738CE06C99A11FE7BA7E9E8C02
+:10478000F587605F7529454F79829E3616DDBBB58A
+:1047900002D73790F9DEA155AECD1AC7E93462E7EA
+:1047A000735761D3685CB7CB1D19A847E22A94758B
+:1047B0008C8BB8DCAD919BD11EBDDA8514CE3677DB
+:1047C000FCB06111EE4B58D2259827A84656119D92
+:1047D00005B318EA8386259156C44B21E83F0CEDBA
+:1047E0001516FD92CE290AEB34E685BA67494FC209
+:1047F00005EF3D15D1AB10EF2FADE5DF79290CFAB0
+:10480000E85E5061849FC315B6BB199A0C1BC105A5
+:1048100076917F20519CC8C947D6BA9A977239BE03
+:104820007BED6F4765FADE4C455619E1D56BD8D75D
+:10483000ED41BD0BE34C35079710BE6BDC2C4EFCF5
+:10484000EB26FADE55EB22B8764D39F91584EB7775
+:10485000BFCFA2FDBE969912C2953FC4CF59AD7984
+:10486000F29B06151E0FE77CE8E43B8B1F9CF0EDE6
+:104870009C3D8FCEE336B3C1F988EFD85999E868EB
+:1048800073D11A6F7A5CB455D01FEC03C99798CED8
+:1048900068BF957F65EB311F76E3172395C81F6FBF
+:1048A0007BF9BDD5FB966AB48E87E66A146F7CC827
+:1048B000DF4A747F6AA32B7C08C151F585B89FBB82
+:1048C0008B2BC2186FFB3B3C7C4EF30F768FFA525A
+:1048D00025E2F38B7FC8E2E34C51AD717E46F45E76
+:1048E000EB25386728ED3F5B8176E8127932E54E9B
+:1048F000AF5A42F2CB25E4F8CB4BF2EAD14F09DCB8
+:10490000B09C7179C8E31481B5D5FC3E8343EE2792
+:10491000EAD4DD33689778FCA75EC8BBB1374CAFEB
+:10492000C775D60BBD60AA99BFCB982BDA170E4579
+:10493000D0241B16FFC915FA63EC6EC773A117725A
+:1049400087C5C1072B6E06F9F3A52C61478E10F7BA
+:10495000D9B5641EF1C319E0078A4B979C24FA8FDE
+:10496000819C40BBF90D29195A91761E667D67EE30
+:1049700027221E14314B294FF82D110FFAA9F8EEFA
+:10498000DC3B221E745CC4837E2EE241FF80F1205A
+:10499000FC7E98F772DAB771751FF5631C6767CDF7
+:1049A000028F01E34CD5075F4220BF680EFA44FE38
+:1049B0003DC11BB4F4D0DCF3C7A91208971BE35226
+:1049C0001CCE97C5F7E85E11700D08B85E137059DC
+:1049D0007A10E506D2191BABEA99E461506D95F0A7
+:1049E000BC17E5457F90E405CF130FAE918C09C34A
+:1049F000E5048C373ADD4EB7E8EFD4281FD1B17308
+:104A0000FC47B3F8BDC397D6CEDACF8269F228B29D
+:104A10007015D25D3EEC0FCAA3681397E351BC77C3
+:104A2000912657AD781AEC4898F4CE0D1C4F23C947
+:104A3000970BC99542875CD98D7205EABB51AE04CC
+:104A4000D3E54A6B3FAE3B887285A5F45030F2C97E
+:104A5000E4CACFBC65B63889255FAE0636263B3141
+:104A60000CFAD4FFE9F5E9DB424E5C48AF5AF91F76
+:104A70000193915EDF837921E8CF8C67740F473112
+:104A800007299F28B7DDC5301F642B76198DFECC12
+:104A900042CA07D931DFA3235D3C2C254288CF7D54
+:104AA000528F97EF8BDE8FF6C2B6093C4EB2E38F82
+:104AB000F778D1CE7EE9F682009EE3F4E65A7920BB
+:104AC000FAE25BA17EAA91119DACD8B3C296F7F031
+:104AD000F3AC3CC2476E0CE40FE0E3E1DBB9FED17E
+:104AE0000D9E070265C63C10B74FC483D45808E931
+:104AF000639B14F5501CA651263DD51BE6F92BBD32
+:104B0000E097E3F9606FC3CE39A89F37DC2A33CA38
+:104B100017AFECB907E54CC7848506F2A56B74D9CD
+:104B20009B688E6FF0C9DEF43C523C4ED0AAF9B9B6
+:104B3000A128CD1C0079B3D734CE777F54157E1FC2
+:104B4000F6779F270FBE3337341AE304BD8D0B432E
+:104B5000386FEFA848288FF253C6903DB071D4A6A5
+:104B6000C5187FEA58AEB1743B69D87C41BB7D6DF6
+:104B7000C519D5069E3FD22173FF32579C4F035F64
+:104B80005522DED2D78970AA26CF1FC1F52A7CBD57
+:104B9000F47DD3DC06F00FABF8FAD17FD57DFA684F
+:104BA000941F6A03CF1FD9ECD717A3DFE884C31A79
+:104BB000FFDA6CC9E61FE956DE42FD1A7E8E58C444
+:104BC000F3167A5DE7CF5BE810F2D0F21B47C2879D
+:104BD000CB714EDDEBB5C7012D78AE14A5138E91C8
+:104BE000F2053EEDFC175AF7E73DDF4879046BB25A
+:104BF00025DBFD8A5C2B9FA5714D08E58405CFE67A
+:104C00000BE48F7C5AB89A1B79FBCF7BBDFFD3C6D0
+:104C1000ADCFE6FA11F87400EF51764C9C19423989
+:104C2000948AC70C0D94A33D27EE335AF9232E9D89
+:104C3000FF5355F977EEE4EC22FACEB23A9DE78FB6
+:104C4000D05F863C904D8CCD467F4715F11B279F4A
+:104C50005E087E67DEC8CD3EE137461DF3893C1114
+:104C6000E6C83B51433CBFC4CA27E992607DC154AA
+:104C70003EC888F33AF0365EC8FDF71CFD87AD3BB1
+:104C8000CCEF575AF927C3F248A6CAFB710B86E549
+:104C900091887C949E5C23CEF3C4795E09AA4D8CE6
+:104CA000E70DCB23993A3D84DF949C5622FADDC070
+:104CB000E8FBBB3D5E5EEF9DC3E2F8BDB35EAC2397
+:104CC0003FD532CA6B19965F32750DE14963916524
+:104CD000FC7C879FF75B7870E6975C90DE2E9047B0
+:104CE00012F459DFA388D03C3DFEF04FEA083E990C
+:104CF000CEE30BBE743C9C3EFE253E2E277B441E1D
+:104D00005E4FAE3D1FEF3EB12F15A29D737FF52282
+:104D10004ED75DF53AC5DDDD0D3C5E39EC3B103517
+:104D2000767FC019CF3B21E4F585D6EF8CEB6D1B68
+:104D3000E1BED9021FCFE37A68C921CA8B3DB30A0D
+:104D4000F42CE0EB61CC67A9B9F87C96D7B3783E38
+:104D50004BAF51BFF052D463518DA13CEDC57C16D1
+:104D600078BFA161847C16114FB4E2A323E5B3E4BC
+:104D70009E3B8FB7E7B3F4DECAF3597A7BF83CD693
+:104D800078BD0DD564678D34EED3634CD987FB5F56
+:104D90007171E7A7D34A227F86F92B3DA59AFEA021
+:104DA00081F4C2E9B9AB5123FAEE72713F36369AFB
+:104DB000FBCD4C8D8716429B2DFEC4228A278BBCCF
+:104DC0008C5E717FFEEFB30C9B7DDCD9F8DD10DAD1
+:104DD000F540872FEB9C4F689C7CB5743DD880CC08
+:104DE000ADB798E8530E64F338822B746CA02E8D07
+:104DF0004EB7087D87F891013FB9D2397C45E5026D
+:104E00008AEED3DF1A419F6F64F3F92D3A64EAA466
+:104E1000303FFF631528472CFF75583B0F6F374C09
+:104E2000FE38E4480FE6B761C592273758F2C44E02
+:104E30009796FC600E39734E9ECCE176FA39790272
+:104E4000F2033F75E69443BD5EAE2F2C78DC2898C4
+:104E5000418EBCE70ADBE2344EB973213EFABCE571
+:104E6000CE4BD9F9C2FEE0722788B4817C936D9D48
+:104E700023F27B0F67A63E48F2D0A3F2757B228C0B
+:104E80007E2700EB28CF3D788E9251AE574B146FA2
+:104E900010E722F9E2FB830FBBC2949FF630F03398
+:104EA000FA79130CA77D76FE7305E779D2C36BBF41
+:104EB000C6FD33C037FA5D172B872C39F161365F99
+:104EC000F739FA32399C167DA5D1337D5FC0A25FD8
+:104ED0006B5C8B8E193268C179E855D03586A32971
+:104EE0004E1D93E21807B1F2C8ACF1DEF0717B649D
+:104EF000A4FB5556BBEF587ED7B978B01ED0299F7A
+:104F0000AC87EE9BB32E4E7F73D86E754D15E513AF
+:104F1000A88CF2092225E8CF1CF6D9FD622B1F6C64
+:104F20005A493884726283B0D3AD3C322B2FEDB036
+:104F30002FD73A67B6E5A76D18E17EF69BE7F073C9
+:104F4000F1DF3FC1EFB6ADF69A8FA35C047C99E226
+:104F50007B4E9487668DFB5D81A7D73DE693BECFE0
+:104F6000707FF2C52C7BDE55A7CF70C405385E2755
+:104F7000EAB17ABA8F17E5F7AA9CE7EA23DD7F75D5
+:104F8000DEDB3B77FF559CBF377BA22F13FC2FF254
+:104F9000FC373D1C3DD8C93EBFF51CF09A3FC1F11E
+:104FA0003B057F4F0BF27B3BEF7BA26FE3F3EB18EC
+:104FB000F7AB2D3BE730B683FEFE97416A03BD6C2D
+:104FC000AAE5F45A54C9E8FBE3D35B797DC752FEE6
+:104FD0005DD3FED7F9BD8F6D51FE3D53E8D7270352
+:104FE0005E768CE7FA707F15EFB71FEF37219F567B
+:104FF00070BB2B0FA3F70A8AEB2895D36B7ABC13EF
+:10500000E0FD81A532C545F708BE083093E21CDB00
+:105010002AF93CBB2AE427C4F76816DD02F5CED98D
+:105020002B27E3FD92ED229EB26FF1CA2730AFEF3E
+:105030008340B9A0BB04DD7BED397E1BC5471E5AFA
+:105040009227AD8435EE3B9839BFA5CAAF8A7E3131
+:10505000B788278932A161B9D51479ABAD4C7C8F63
+:105060003DA661FCE999419EB7DABDFA99633351D7
+:105070001F57CA9467D63578D47B19AEBB8EE7F537
+:1050800014A90929DD7FF1FA5DDC4EAB39EA31AABA
+:1050900086B77F66F028D1DD76C0BB92E6FFC902F5
+:1050A000CE6EF427A0DF5E57CFC04C68B7775C9E0A
+:1050B000143352ED46FB39FF752F91C577E8197D02
+:1050C000C7A1D33CE541B9D989E71FD0BEBBC6CA49
+:1050D0004BEDA17B597BE74C9E8379E2DB6EE0C10F
+:1050E000D2AEF021F2937B6673BB6CAF04ED605FD0
+:1050F000F6B568D7D33DA6561E278232639CA81703
+:10510000138111AFE2DC8E525F60DECE86BE019C61
+:10511000A7A88E7FDFA2A82673FF17026EEABFCF73
+:1051200015A3F8E748FBF7AF3E8ECFCE2A7E5EC0D0
+:10513000589CE252BB85DFC5D4A891FE9DD0960055
+:10514000C7CF4E1733315EE6ABD348AFCB6183ECAC
+:10515000503FD88F188FDB26C516637E486C92C6E9
+:105160001E278C98DE7118BF9B901746FADB24250A
+:1051700042F85DE5D8381EDF3E1AD949F7AE0E80F9
+:105180001D4DE16096203DD51DCDA3FB504723D595
+:1051900083D4DF57A1BB2D8D8279F3F4A148C626B5
+:1051A0005DB6692BDA359D53641DF3363BA5FA28AD
+:1051B0008E17CBF5501CD935651EED9F6B549E9410
+:1051C000AE8F6EF473BD30342172A31FD6159A7260
+:1051D0002A17E396DB6B5FD987FBF7C8FD1EA2A3F6
+:1051E000476A07EFC679F69FBDEA7894F8929FD791
+:1051F0003D5A7BBA14ED9E5D4DA772117FC5189F75
+:10520000037D585CC1E368A801C93E537BD8CD80BB
+:10521000C7E2368D1969FAD8CBF8791EFEF92693C4
+:10522000DCA3BF67064F795A70BC252C7169809E3C
+:105230007B309E65C999E23A96280079B87FC53BD4
+:1052400031CC937B646201DDA32C12EF4972C278EA
+:105250002562BCFE375E598FED1EAD2E30505E14B8
+:105260000F0CCD4325515C759AE26C21EBFE47D4BF
+:10527000D87F2BD1A74CDFA92C0EBFF317B88E8097
+:10528000AF8FF41CB4A7B899731D8189E67D7EC0E9
+:10529000E337A5D657C70553FE18FD213FDECBEFF8
+:1052A000651767FDC35C252DDFB644C40536498309
+:1052B000B3C92E7D80DBE163599CE45C7155EC6ED3
+:1052C0009E6F1BA57C5BE7BCDBFDE7F4AB44F7A856
+:1052D000F39BC4BD12FE3B3625E2776C9C741F0A1B
+:1052E000E557755C95AAEF8B9E22FA7F5A33EECA7A
+:1052F000F4BD877D422E6C12FE9835FED85C3EBE12
+:10530000557F54E7F4F8F4CB79D757C17AFEAAADAC
+:105310006C12C63F778CE0C7AD0C70FACB1E000B49
+:1053200007F440FF6BAF79319FE56999AD4239557C
+:105330005F95F024AB041E617CF2C560FC03E16F55
+:105340007B502E7D35504970AD98CAE3069D550FB0
+:10535000D2395048E77A07F913E5BB2F149330EEA2
+:10536000BDBC86E98744BC2506F8A7BBF3324BE5F4
+:10537000F56FCF253F077885DFABC1DCA4C9E2F725
+:1053800027CAF19C68D3DD227F56467C778A7980D4
+:105390006F699E0345629CFBB8FD8FFE05F62F17D3
+:1053A000F394D77DF76BA8C78B744E1729F8FA3C96
+:1053B000045FABCC083E35F12AFAA1DB271518486B
+:1053C000370742E1B79BA0BE7C914AF1F8F21A0E72
+:1053D000C78156997E0FC85FA71DA4FB6326E88B83
+:1053E000347C1962DEA29A8484E75A462B5F17B494
+:1053F000F3A25C34C2000FD40DB1AE73F04FD208EB
+:10540000FE22CF20E6169DC3C34A1C0FE877651D18
+:10541000EFE70FF56D4139B6BC8EC30DFA9DE0295B
+:105420000A6B0751DF1785F878CB013F87A4145C1E
+:10543000D9165C7532E55F15D56807D10FCE16F029
+:10544000AD0C7378FA5F3F3520F1F10C1C2F5BC077
+:105450009B2DD64F09BB05423FC0784FB912F57856
+:105460002FE7D414661CE2B3513CCB7ABFAB15F0E6
+:1054700000F8F18B79D86E37F1132C31F6B1CC7F6F
+:105480003FC4488B5B54ECD66C75BFD83FD6C59FE4
+:10549000931F472A91D765E1D7ADACB2F763356961
+:1054A000F532BC5FC6E97DFDB5FCBCE3C0046E1FF0
+:1054B000A1DF718EBF91CEA7188F7505F1BD46FA99
+:1054C000AEA4DD3E6E716BC174940FC5030FCF9314
+:1054D000613D45F73259C9217A96CEC93F98EFDB35
+:1054E0006B12747F367B209287F2AEA4356F3A7EC2
+:1054F000FF2D7B204AF5EC815693E79F810B938724
+:10550000F97A69F394A29CE6F974AC55EB43B95669
+:105510009B0E27BC2F79B9672EF6DF7CF72BA39162
+:105520007F0B1CFD3D39DC7F287E195A0570FED3A8
+:105530006BB1BD15DFC94688F3A87C19CB621FC8C3
+:1055400063284B44FE9D252F3A27BC3329EA13F4E8
+:1055500043F9782C916EE73B4B683F5EB48F49E787
+:105560006D779ADA8D146F1A08F0785340D8AB3DF6
+:10557000CCD84FFABD86E77BF8F039E88FBE9AA306
+:10558000D3693FFB5818E9B9B8ED4FEE74797D73D4
+:10559000A054DC834E10DD6B255974BE077C4CDFB4
+:1055A000373DA0B6D2396B5F113FD73C3AE71509BA
+:1055B000F159F41CCFD3B6ECE5E93589103EEF7A0A
+:1055C000357A19F1E708F6A7656F3AD77349FD8375
+:1055D000240FC6469917CFD7FCAB55CA632D890255
+:1055E0005C55281780A40B01FE9AD87AA41B23CA05
+:1055F000EBC66A51AE82F26AB06FD70D94FFD295B6
+:105600001A776B05D8B5683F0DEEF6DC80F64A2BAD
+:10561000582306DA8BA73CF83D95EED6E9F988E7E2
+:105620006722967D999070FCA29F9A642FD6EA9A81
+:105630008E719809EEC4E8F473BA0373DEA9A6EF7D
+:1056400089CDBFB87CB291F409C222A7E991FEAA24
+:10565000A3A45F9EF08F273D64E9154B8FD088206F
+:105660005F6E117CD465243C12C92BE05D80F3167B
+:10567000942340C7FE222ECF410E733967E993BBB6
+:10568000B9DEB7E4678518E71694B7D0AFBBF689E3
+:10569000DC1B50AE0839EB0F1933F17CAE42C85712
+:1056A000A6C6249CEFC014FEBDCA80439E56B4F229
+:1056B00071BA428CE809F4D041A49B034509BA278A
+:1056C0007EA0F5A8947ECFD4D27781D624C3FD1FC7
+:1056D00057C7E5E0382157BFE337387D7AB85C3DDE
+:1056E000A7F784BCDD6A1E65E2BBB019F3B0FE5EAD
+:1056F000E8F39E8A43E4176CBBF514E1D38A8786EE
+:10570000443CB4BBEA2D7ABF3DCAEF01EC32A7CFCF
+:1057100021F823CB35CA3FAD393AA70CFD8DA6E55C
+:105720001ADA75270305D6F9977721DA93ADABC856
+:10573000FEF5897D7C28CC84DFA9919F75DFD26F2F
+:105740000F60FF10F84592818DFA3C6EA473FC9EA9
+:1057500002E23B3A489D7D35067D07C2B98EEF05D2
+:10576000F87769FDD1E4C038DA5799AEF4F86A18D1
+:10577000F99DCBC1AFC36177AB61EF0478BFBB4983
+:10578000D6D7B354FFFF15E0F96813FDFC9EC2CED7
+:10579000C5A7B7609C6FE752F19D3307FCF735F65C
+:1057A00079149A07630294C79CF17BFB55FE2CFE8B
+:1057B000FD859ABE01B4E703551CAE170306C7FB6F
+:1057C00020C7634F44263EDA3558ED457DE7B41BCC
+:1057D0001FC97E7712CF6BB1EB9B0BD58B1D727FF0
+:1057E00082BBEF3A9277DF94495E31C6E59DC4648F
+:1057F000037F57A325C0E9A94AC8EB0E57623FE6CD
+:1058000015743CEB63EB8D145D1489313B5BE58CC7
+:10581000BF9F7628A0F0FD1FBEEFDC7E10FBFEA42C
+:10582000C0C385F61FC32C684FF7C5378DB903E594
+:10583000782BF79FFB126F51DE51D1EC85E4F71CFA
+:10584000397829F9034555A6EDF735B347F05B2BB9
+:10585000723CE78D078C248FF7ADEE203F7BDF6035
+:10586000E67B3105393C2FAD0FE4257EDF64A4F9DA
+:10587000F51CCE7FFF14107437E71DFA5E469A9E22
+:105880007D59E859D2B7C52A8B2969790E1304FED0
+:105890009CFA93A971CFA53544E784BF7DE2FCE271
+:1058A000215326BC5B748EE7078857588729E890F8
+:1058B000CE377A58DC837C136BE2791E4EB827F81A
+:1058C000E58B5A5F3087FB21E7E613FEFA443F87FA
+:1058D0007B67EDFD74CF11E60B217D483FF88FD338
+:1058E000741FEA5917FD9EED8C675D098C69DD799F
+:1058F00090FFDEA2FCA297E0FCE7C3FCFBEA093FB5
+:10590000B7C77EADF3DF2BFAAA7BB0FB0B501F7A33
+:105910005661644FC6417101BD9E16F4CA9EE3F5FF
+:10592000955E5EBDF360FF321C6FD5733C0FF3CE06
+:10593000E76FBBF10B50BF6DC0457706EE7C7CBDB9
+:105940003606EAB7C7A53EACFF663AA3DFFB8CE597
+:105950006914E7FA4D60B06001E0FB83751E665C78
+:105960008671D2C182F980873BE24FCFC47E773CFB
+:105970002585916D673CFBF82BA301AE3BBF215100
+:10598000FED7578E64DBECC2D3B09469F07ECD4174
+:10599000FEBB91B7B19E99888F3B1FEFA5DF3FB447
+:1059A000F0F9C1BA4A66A4FD6ED89DDF789A7ECF21
+:1059B000F0AE6F49F4FB8A77C9FC1ED13F3FEF5D23
+:1059C000F4980FD7B75EBBD48FEBDAAC61BBDBE2E8
+:1059D0002DDFC594A63BE207B599F0FE8E0307B50F
+:1059E00095E897B95933EA9FAF1CB9C226774EEFB5
+:1059F00053C83F5893EBA1FBF5CC6786E64D18BE24
+:105A0000CF1FAC6336B8EEB0E2046A5C9B9BD6DE77
+:105A1000A573FFF72B4714DB3C961D103BC6F542E0
+:105A2000EC6FFD143FB7F66F8DF0BBADFD5B63050A
+:105A3000E2D5A1C999E0E9C6FD00787AD6E954EE2D
+:105A40005C17A272F73A83F6692FE211CA2E01772A
+:105A5000602AABC7EFF3074C9E769CD764D6E3DD94
+:105A6000B2BC08AF172C89921F32921D63957B5DE3
+:105A7000D116F4213B77F4CF52C1EED9AB45EFC636
+:105A8000C897DEF1EAAC06A8FF4D4E64630EC99BD1
+:105A9000B0817C67F9E75FCFE17277D3688DF0BDA5
+:105AA00077E9E4C714CBFFC2B8DFD2954FA03D0120
+:105AB000FDB7E710DF86E93B5D23F52F585667EB0E
+:105AC0005FB06C95D57F0FF5F79CBFFFDE65D7D82B
+:105AD000E75F7687D5FF1182DF777EF80B9AA7DA2A
+:105AE000E76F5E4DFDBFEAE6FB3B94EBA17CFA0E4F
+:105AF0006F38E122FF99D1F739D4BC4B0FD1F7931E
+:105B0000CEC599064DD4B3BEA772AB518EA5E86839
+:105B1000FA37711D7EE0AE743ACAA9CBB2F155AE28
+:105B20009967ABE7CF1E636B3F2A52667B5FB8E88D
+:105B300072075DFA74CA83655C9F9A18E70438B5EA
+:105B400031FC7B4DF5633CB4BEFB5FF452FDFE6B54
+:105B5000F8FAEE1FE3233E26DD05FB7EBF16BD32BD
+:105B6000DD3E86754918F27A468F0EE4D4A63F379B
+:105B7000647C9EA5F0DFB1CB72737DB9B974F2631A
+:105B8000B1347C6E29067A80FADB399A2DCEB3B90E
+:105B90007865A8256D9E4DC5DAA24355FCF92D68A0
+:105BA000C7EB91BFC3F9BEAA0D5D8AF6AB731E7732
+:105BB000599D6D1E4FC92A9A27E998C75DB2CA310F
+:105BC0008F67D121F15CCC730AE964A47936975DC3
+:105BD000635F4FC91D34CFAF719EDAB4F594DCE139
+:105BE00098278BAF079E8B797E73DEF5944FB5AF08
+:105BF00067EC6A9AE7DF1DF3B8C7AE76CCE3A3790A
+:105C0000F039CEC38AB81FA5B98756D2FEFFC0CBE4
+:105C1000300EA4B9A37F4D9754FEDE4B71616865C9
+:105C200062BBFF03D8CCA6FA008000000000000091
+:105C30001F8B080000000000000BE57D097854452B
+:105C4000B670DDBEF7F69274773AFB4208378010E3
+:105C500034C40E840C203A0D41061DC0E00A2ED03B
+:105C600061C99E74449C87A34E1AA28888DA286A68
+:105C700050601A04071CD0C0040810B001757006EB
+:105C800035BEE7B8CC82CD2241884983A8F866F1B9
+:105C9000AF73AA6EFADE4E079837F3FF6FDEFBE3B1
+:105CA0003753D4ADFD6C75CEA953D52427819051BF
+:105CB000841C8CA3E90842BE89715FEDB012F23DED
+:105CC000FCFD90D03F2F21C93C4D21642EE17FFE89
+:105CD000C5022924A4D6CCB273364FCD5A08694BDD
+:105CE000515A4901FDC70A9BF30A8590CE9622E3DB
+:105CF000ECDC707F6A3AD7279F0CE6B0B6DF93F0F2
+:105D000038DE7124A78E8E5F16E7C0F9A8F993F5E7
+:105D1000346F22E4583DC1B45D26338BE9F713F5A7
+:105D2000740283B5F35D88ED4E4AF49F49345D25D6
+:105D3000F8BD025DD7F20F64320087F93087AEE319
+:105D400076BE8CB9BE5842CCE179784CC405ED42A0
+:105D5000BB4CFE75027C75F531A4D1A43191107550
+:105D6000BEFD09F9D3BEC96F0B76CCF6318C24E4A5
+:105D7000CE255BDF826A1F09257DE7D1F54E6B5E7C
+:105D80002EF7A1F94E3938C369D5F4334D3E06EBF1
+:105D900036D3FFA09FE96E9AD78C7F57B93E7F0F0D
+:105DA00091C2F96C42AE72F4E7F8E0E32A7E19F092
+:105DB000753B5D533A45E13D900E836207E26B8689
+:105DC00083B555E7E379502601988F144C26B950D6
+:105DD000928CF5DC504FE939BF19B2D9554CF139E5
+:105DE000E30111E11839DFE0BE5897218FA68D5FDE
+:105DF000C9A4FFA5E73F7381BE9C78D9782A5C557A
+:105E00003AB863DAD8674F68E863BAFB86674FE849
+:105E1000E0345597BFA76EBAAEFECC0525BAF21294
+:105E20006F85AE7CF6927B75F9B9BE0774F5CB1A17
+:105E300017EACA2BFC8FEBCAAB362ED7E56B9A5606
+:105E4000EAEA7B5AD6EACA0DFB86DC44281C1B7E94
+:105E500027121385E3D7D6934F5D9304A9E404B8C2
+:105E60009FAA4F43BA3E5DAF605A0BB4370AF8673A
+:105E7000B8D94DF1E48909959278421EF68D59B250
+:105E8000640CCD1B69F9684AEDBE714BBC99842C3A
+:105E9000712848F762A3910428A90A24A19BAE4364
+:105EA000A2A63C7889F246890486F72C1783D1BFD5
+:105EB0007709A14119741DDE4F4D6483D093CFC380
+:105EC0007C49FA90B4DECB3B0CA4BC49237736382E
+:105ED0000C389F64C7B80D0E4A0FD546C6EFD5DB08
+:105EE000D2C7113BE40383EAAC1719AF894E2615DC
+:105EF000FA61FC52E1EF13E65FC4DF001DDF0F8E95
+:105F000073AF77D0F13AF68BD3601E247030EB96E6
+:105F1000A130BE6B037C272DB49374CADFF5AE6746
+:105F20004F5C41C827F51331FD7D7DF1B3276442F5
+:105F3000FE583F0DF347EADD9806EBCB313D565F47
+:105F400087E527EA1760FE64BD17D353F54B303D54
+:105F50005DEFC3F28EFA46CC77D6FB3155F980CA95
+:105F6000A399C5C0A7C5C506E0D37916C2FF58FEE0
+:105F70001C5F8348FFDD867CED4C03BE3E67FD66FB
+:105F80005006A5B7739F5062CAEE1D4E9174D73B61
+:105F9000FE5C06C05FA99F124F62CF724B0CC38F8D
+:105FA000C54026122A7F1EBFC248243A7ECC1B570A
+:105FB000AD13B3F1BB04A443370EE7545B94FE0763
+:105FC00012C4D7A5F0A4D63FF9E29F0B67E5027E85
+:105FD000FA239DC41C14EB18DE5E7602DE2E053F0C
+:105FE00089F357241C8537FE9415A4F5BF4C56E160
+:105FF000D99645687A8BA3F814D0C1B96613AEEB75
+:106000005C6BAC9F401F8E24A48BDEE1C6E651B5CD
+:10601000D1E2D3CA879AA6789F5E5EA4FBB4F2E26F
+:10602000DCA197EDC0F7F3D244DF89E1401F2E4E8B
+:106030001F8CEED4FE6B9AB27D565D3FFAFC399F01
+:1060400030B109E5BC1277EBD0DEE7392FCD88E31C
+:106050009CDE38200EC63D5D6FF6C1381DF50E1F63
+:106060001B37CDA7A5CBEA05B1BE1389E1F9F5D65B
+:10607000EF3F7B7E843493E36682A0FF7E40EFF5A2
+:106080007BC58774DE580CF4D12A7F03FB4E4C8EFF
+:10609000BAEF489857FBF534895ED3D5F07DB36EDF
+:1060A0003CDA4E39A9E2A9FFC5F02E9193EA3AA94C
+:1060B0009C1C4A6537D0292566C4B39BF61847FB5C
+:1060C000EB92AC4B043A8E295EC1720F0C44E9A9E5
+:1060D000C61C34BA1504771BE859B346AA7CAFDC5A
+:1060E000F1074A725FFC56264BA1FC2FB4775A2E5B
+:1060F000F3D239A4D84EE878B39AAB26819CFC62DF
+:10610000C78FB99EE22B84757F490C13814FBE2443
+:10611000FF6E1FAED1CBA6C41BD9FC96B0FDD94BE8
+:10612000FF83F5513D4DB75F9735EAF3A5E4E614DB
+:10613000E087D21532F1D3B957C07EAFAE9BF2FDE6
+:1061400075F14C8F2B23758B414F592A936980EF42
+:10615000590E22F5A172A266E7EAC2129ABF2DDE9D
+:106160008074759AEA770A954315094C8FA94CF209
+:106170001B5DB4FC78F3F0DBAF21D0DEBF18E49AEE
+:10618000D7469C1B484FB8CF5EA29FDFA5E61F39BC
+:106190005F4216E17CD579A8FDAAF310370A2E7F5D
+:1061A000147D7676BC10D693697A5FBC5E7F5D0005
+:1061B000798D7EFB70447E51445EA51399D3892965
+:1061C000DEBD203E19E8223401F53442E923375C74
+:1061D000CF18AEF7F0C5EA99A09E88F5165DAC9E83
+:1061E00025DCDF63D1EAD5ECDCB2C34BE9A9F2F5DB
+:1061F000E7EC84CAF32F245F8A937EAFDEF0A81DFC
+:10620000E0744AF2DA01DF5FF8C589D1E0B5AF1B6F
+:106210005E2EAB007604923685FBAB4F4C013DE918
+:106220009B0DB243A4553C1B4D0113A5DFDAE68A52
+:1062300049240FF34759FEB1B322E45BF4F8ACFCF8
+:10624000C573298A0DF1C0F46D1240BDA376FDE738
+:1062500013408E7B4808E930B21D8C7F2101F9BEC6
+:10626000C418D7B39CCE13F5640FE7334FF313670D
+:10627000453BA437B4039F7922E8A8BC7B7F091A69
+:106280008BE97C5E8FB7259DBC8A667F407E00F2DD
+:1062900040850BF133BDA261D30B7947E9BC3AD6F7
+:1062A000FFD62EE46AE508A3C7734DB37FBE5BE952
+:1062B0005DDE7472BB28DCCE8FED9416A607915676
+:1062C0009656CB013BE89DD56B6527A55452BDE59D
+:1062D000E5575E047BED5313DA6B555BDEFA6834E9
+:1062E000CD576D959326B1E5588594307E3CF47F6B
+:1062F0000B8685F151F9ABB78CCA50F6FDA18430FD
+:106300005EAAB6EE3792A13DE158D4B4DF18B44688
+:10631000C14FD3D109A0B7346CFAD608F6D717FB12
+:1063200004929ADDB37DF9DAB7705F0438213E3903
+:10633000BEBAF1D7036F8129BB0BB09E03E4E5A57C
+:10634000F0E6E372BA66A78DC4D37994FFDEE49FCA
+:1063500004F87CED3E3BACA75DAA6374BEFAD11491
+:10636000171DBF5CF6A6383065DFCBD7DC8FF4573E
+:1063700026D4A538909F5CE90694DDDE7458E7DCEE
+:1063800055B7E13A4B891BE9B07CB558ECA7E9D782
+:106390001299B8350A9F1426303E695F47914BD752
+:1063A000D90E7A3FE8DBFF2EFA37A07D7A2F01F96C
+:1063B0007F3F5F33DD2931FFB599E1CB9A6050ED26
+:1063C00045B38E7ED73FD606783ADDD7950AF3A43B
+:1063D00070F072B809DFD37EC50FAE4F6578228AA0
+:1063E00054C8DBD1FDA008BE43FD36D965C9D3B57D
+:1063F000E3F2938D3F9F8F4FE71D03FB5B7B0AD535
+:10640000EFA3AC6F16AC0FF745BACF69E84CC3EFFA
+:106410008CFFD73FCEF85DE57FFFD489507EFE43E9
+:10642000C647D00EF6133AAF402A96EFBF5540F953
+:10643000602281687CBE5EE67CAE2FF7507E053F11
+:10644000814A2774FE9210A7A5173A4E02E201ED89
+:1064500095D215B4BD56BF8171B19E31FC5DB3AF0D
+:106460009471B9909F40E5416C581E9055C997A50D
+:106470004756CBC40B2A67F5A726B4C7ABB7C8C528
+:10648000B0FE339B0F7E7427A5F3334D2ADFEAE578
+:106490006A24DF966FDB20009D46F2ED9972BA8B7D
+:1064A00047E35BFA3D2ADF9607FF9FCA55157ED367
+:1064B00013F4F294CAC77EA042F406C748F9F8352F
+:1064C000E85BC93DE523FDFB9014F6A44395FE541B
+:1064D000BAA31A5C3F90EBDDF4A9D25F377DAAF432
+:1064E00017B95E3DFC22CBFB838D44E9A47817D518
+:1064F000E8283EAB5B05BF09F9DCFB769F0284937D
+:106500000BB737E27BBB4F9236EF8FC83745D47756
+:1065100045E48B23EABB23F275BAFAD52D078D0427
+:10652000F11FD0D5332D78891C8F620FAAFB8FA75E
+:10653000F9ACD10B7491193282DC931751D50DFC53
+:106540006B7B45F4AF7529217B02FDFEA885D969D7
+:106550005D0E9E8F67F950B27131C83DF57BC84220
+:10656000D03EEF2A0ED9E335F6FFD156D1AED0F2A8
+:10657000A09F4CD4FA11C2F369407C07496FE5CC67
+:106580006FD81563CFC3F162B2FC407FD78BD6AC16
+:106590000560EFF94427251F3267E11D7642E9AC1B
+:1065A000AB75C04DD3E8F7B9EF88A06E53F4B8A42B
+:1065B000744A37B3391D9F22DEE7C7D0F5CD6E652B
+:1065C0007AF89C65D1E9BE92D72FB5CE37827CA5EB
+:1065D0007AF431AD5FB4922C43BA2B5F15F1BDF55F
+:1065E000C7C81F9511FCE1E6F6C35E953FF2493E30
+:1065F000CA174298FDCBE5F2F562EE4DD3281EBADC
+:106600000E89C4A4803D2B92C5B0CECD821FFC055F
+:10661000C49B8C7C564B42280F553875001F0DEEDD
+:106620005D4E756CFF53E183402F3BFE90F7124D9A
+:106630003B767C3A680FE4777E9CF507D2B37ED137
+:10664000BEEF66C07ED6B5CF847EB1AE7DBFCE7ABA
+:1066500010F2BB4DE817EB5A6472011F78F7D9FCB2
+:106660005740795F663F34ECFD362F88FBEB23887B
+:10667000B75309CC7E39D7FAE7234212A47455A048
+:106680003FEC8B453EF2ECB6A0BDDEB5F7DB42B782
+:10669000F59FB79E5A2371233DDAC8B46D40BFF110
+:1066A000CC7FECD933EAE58574FC9AE6FDC6D9B413
+:1066B000BCE88DBFE681FCECDAC6F4A24E39B886A0
+:1066C0003809F92AA1EC7119FC7CC04C19843C9D55
+:1066D000B8F1066F6E34B83038745138C0BA285CDF
+:1066E000CA41EEF7068F984423D2FBBF1E3CCECEA4
+:1066F0006072ED0704FC4261B8082EF6DDE6370B48
+:10670000B87EF67DDFB7792077CE342D447DE55213
+:10671000EB1E92F8AF4A07FFD5750B81CB59F7C432
+:106720007F597C33FA7F2F41C17946F2414F3ADFDE
+:10673000F913CCBF6673E27C2F93FFCBFFB7E17DEB
+:106740001BC5BBFDD2787FEC7F2CDEDFE178B7394B
+:106750004C20CFF6FE15FDACEAFA2FB5EE57FE87BA
+:10676000AE5BD5E36F34D41D9E4AEB1F268115C561
+:10677000749E6F665EFFE1545AFAEB5EF4938F12DB
+:10678000991DF86B503EC0FE4B13FC1BD0AE6076DB
+:10679000531161FB7A514E19EA1B45394FA0DE4077
+:1067A000A4BAC3F9141E3766CD752EC5EAC33E716F
+:1067B000D3FC8FD2AF75A2FF30C27E3C2810974029
+:1067C000F5D8A22B6F380476CCF84C3960CAC3F4E4
+:1067D00028A46FDB27B2EF56BDDD3409EC1D8D1DFB
+:1067E0007883A22F9FC0FB9B48E61D9E4AC79F98B7
+:1067F000293AFCD06EAC4F82F54CA2CCEDD39C1F55
+:106800004D88E86F1BD531B5FEB5BF177EE624660F
+:1068100067FE9A8E9F0FF0CB94D17F7849F801BC28
+:10682000115EF9FEA5A05B494E84DF8D19351C9ED3
+:10683000CCAE96787BC9BAB80DF85622D42E667ABB
+:1068400019DAD3AA5DDC1B9C09B7B3253EA40A77ED
+:106850002993DAD9FAFE101E2A3EFE5E3CA8F8FB08
+:1068600047F1F17BC0C788303E32CF3B24E0CF22D6
+:106870006E0F8C3FDF26623ED329E1F90BB707C6C6
+:106880005AE325B007AE953E10812FCBCCBB2AE151
+:106890001CC1EC1490AE077718D0DE31170808F74A
+:1068A0009C4609F31F181C2340D19E72CDCE330F96
+:1068B00010F027BB8C4CF12E66FEFCBF7CFFFD98D0
+:1068C00042F0ABB0BF32FABFC914BE735691400C50
+:1068D0005DE75C897821C4612E5DD4319D3F589F6E
+:1068E00087BFEB52C2FD5CAA7E6F72E49F9DEEA44F
+:1068F00072EBD81584EC829439FB25ADDDFC835610
+:10690000062FCF61E2EF8F72C125166BCED9FE2D17
+:1069100089C98F9D7FDC361CFC6763BB72E3983CA2
+:106920002D30005D7AB85D708E287110AF70AE7535
+:10693000401C9E231E126DEE287E9B4DDC9EFE6544
+:106940003D3A9549D77AE213C16E2221F4DF7AD716
+:106950009BA39E07CF4A3270BAE178A37F62219C45
+:106960005BB0F1E7D2A6715ABC754CFA42CAEB890A
+:1069700007F83BA6395FF947E10BF63BC077932553
+:1069800038A1388AFC98CFE137E5C077E8EFBCB290
+:1069900075AD01E8F7CAF506DDF9647512B7BB8677
+:1069A000916130AF29072CB602C0CB21D169A1EB90
+:1069B000F3B49E35BAA39C7345C213FA073FFAABF2
+:1069C00049EC5C608FDC341BE0BAE74B33F152FCDE
+:1069D000EE32FAAAA2CD332985C9B9B9A4E9BEBC61
+:1069E000EC7F3DF88EEDB206C6819DB99E70BF4624
+:1069F00024FD11A4E3731B891FF653B04B412E9C59
+:106A0000DB4C703FA7207912EC6ACAEF3FD4FA69D9
+:106A100006B76CFD25E801B5AD82C340CB6BA5A0E0
+:106A200011FCB19E967811F6DD7C85B8F07C587229
+:106A30000CBD55C317AF264908DF83A3F7DC05E378
+:106A40007ED56124A08FB8DE0CD961DFFEAA75382F
+:106A5000F2416FEBFA553DA91C2F433F4C1E46D225
+:106A600043EEE6185DFE1AD19D01FC35C5149CEF7E
+:106A70008C82BF49C98CCE2E5BBEF9FF3F936F1F3E
+:106A8000AAF2CD2D166BF8282999D1BD46BEA54690
+:106A9000936FF3042515E03E6FEF8054C0EBBC7795
+:106AA000E4E468F26D4B3D3BFF7B9DF223A45DCD9A
+:106AB00054BE5DAD916FCD54BE65F76CF7B7CB9505
+:106AC0006FFEFF1EFEDB02F22DCA7AE339FC54F999
+:106AD00096D77A14E55B5EB381281ABF9339F952D1
+:106AE000F24D48BE15F4E143B233360AFD6CE1FACB
+:106AF000F7EB3C6E0FC60139F7A364765E7AB97284
+:106B00002E3D85F1C925E5DC7F139C5539376F3B58
+:106B10009573D9D1E890C9B979BBA89C13801E9907
+:106B20009C9BB79730FF5B847CCBE921DF08D6AF15
+:106B30000DB0F69E96EC17EEA6FD0D73C94E33AD63
+:106B40003F2C2CEF4668E5DD8F922584730F797713
+:106B5000E8F2E4DD762EEFA81CEB0FF235923E9CB6
+:106B6000AD31BAFC9E51ED9B7F05FCF2AE88E78B00
+:106B70001F18D839D07BA3DA0B80BE56F2F97838CB
+:106B8000FD75D67BB1FFA237D9FA6A3633FF776D30
+:106B900033D30F6BD78B7E85FE73C2E8EF8C30FF4B
+:106BA0008ABD0249A5F9A926DFF35690C1BF900915
+:106BB0003B172393F235F430676415FAF11B2CF67A
+:106BC0007584F2F11C8998C15F5F659DF005F8E955
+:106BD000AB4632FF7E15FF4E78DC801A0759DA7219
+:106BE000EFDB7D48CFF881292686C7292F0BFEB51C
+:106BF000D910BFA42FAF8A887F7C8AAF73AA1844AC
+:106C0000B890F7C5A8710C4F45C2E31087075DBF68
+:106C10000E1E7E212A3C284627E5A784D75FF16E09
+:106C20007031F8F32B560A78EEABC223729D2A7CA2
+:106C300054FF74156FEF69BD17CFFD23D7AFC2AFF7
+:106C4000C7BA557846ACDF97CCCFBDF2C97088A7DC
+:106C5000A1F480F2C3FB1B0A073A4EF1D82B52B5C0
+:106C6000F2F8790E87E1BEB145E904E046EA807E9C
+:106C70004A1BEF7D3B9DAE7FC427CA30D826AF1993
+:106C80006D72C339EA264B08E59B4A5FED2ABDF3D6
+:106C90007EF664D48D437BBD4570807EE10958103B
+:106CA0008E1E4A67165AE5E0CA6F2670383A4CC8FD
+:106CB000577CDFA17037D0FA13D47D88C21DF866E7
+:106CC00078EB593CCF2D20213C2FA96D149C01BAA3
+:106CD0008EDA16062F55DED23FAB161F51E8518AC9
+:106CE000468F049CC485E17DB08AD79B62F27D0407
+:106CF000E7305328BDAF25613CE6D0FF008F917887
+:106D000052E17929FAFC9CEB1F5B008E5680578874
+:106D1000E95101BA2FD8C2E51EC9AB8363D18B17E5
+:106D2000187DED1514384FE88613D02B2D1FD1CACE
+:106D3000E815E0A600DC5B4B44C89752F82666F7DE
+:106D40005C279C5F6AF9B762EF51D6FF6AC149A21E
+:106D5000D0AFBAEEDEE8F71FA5DBF608BA7DCF129A
+:106D60003A3C1CE876AFC0FC08ADF1BA7347530A51
+:106D70003B77DF64A1F40DE75DEFC8CE754A4F3E67
+:106D8000BFC0E109FABFA2F14B0D8105C059E04631
+:106D900033C69FE13CFA33FD522B5FB75848F2AD42
+:106DA00005BDF76FE4F6406FFA8D9A1F0AE381DCA8
+:106DB0006BA1E3E584C78B94EFAABD7FA97525A6D7
+:106DC000FC63EBEA8EDF246D78FE648A773F98845B
+:106DD000FE1F169F743B8F4FA233403D4B532F2D08
+:106DE0007944EFF5489A19F7E1FB785CFCF5A29538
+:106DF00078E93ABE72C948A77497FEDD1890CBE3D4
+:106E0000E83E4293AF0E8FF8F86E2C17F13CEAA6DD
+:106E100077136BE09CEE261046F4FB4DF902EEBFB3
+:106E20001F4067A3408F3513978993302D1FF98337
+:106E300078F41BE5AFF71529949F866DF43740EA87
+:106E40002C0A25BD07F01B2B12805F9B2BB108F687
+:106E5000AFFB3E27F9A282FB2CF633EC1049867A71
+:106E6000A35DC9680E8C6A5E5104FED1A907AD56B8
+:106E7000A0F39C5506E2D6D0EF68E26F8073F8511C
+:106E8000275CB700FF95537D01FCCEE5AD6B1BEC95
+:106E9000905F253815DABFC7EB9E60A7F3DAD2788A
+:106EA00076C255C087B41E74E359C5EA79D60B4E35
+:106EB00008952D6D5D8EF138A5EB05E280FA7E8197
+:106EC0009859BF7E33ED77CB2ADA9EE6CBA03DF40E
+:106ED000BBFEEC87B7009F1F1659FBCDECDCBA94C4
+:106EE000B653805ED7DF8BFD55AC12481AEDAF7CF0
+:106EF0003393FFE58765279437EF5F89FBD8243A02
+:106F00005E7A36C8FBC078C893E18203FD9D99770D
+:106F1000225F7771BE261DD398DC10789EDB0DAA08
+:106F2000DE742085C507973A171A13693FEF8D4C19
+:106F3000CE8630014FCB593C8F3E41E1ECA670FE2E
+:106F400080C7731C1C79DC18D4EC3F9FA50C403A19
+:106F50009CD33216E31CE692628C7398328AE96BFA
+:106F6000EF5F6BF10B745EEFCBA14CF87EF05A1320
+:106F7000EABF9D5B643C2FEEEC1B44FF74FB2A9937
+:106F800040BC46C32A11E562FB66B68F8BAB6F9B94
+:106F9000900EF0DB2038416E1E5C5564847DADDDC3
+:106FA0002F60FBA2D5F7A7303B86C943D56E2B7562
+:106FB00054E8F68F48F9A6CABF1A0E87483957A376
+:106FC000EE331172AE06CE9BED90EABF7B8895C979
+:106FD0003FD0FB01EF81EF907E6B0FCB04F47EE19D
+:106FE00078C7048CDB827D93968F6A155C70CE5FC8
+:106FF000FE89C98FFAAABF64E64F417E7F6A22826A
+:107000000271F014EE542E8C3485FEF82CFDFEC572
+:1070100007668890A17452827056E3450B36B0F82B
+:1070200096820F56A494021CC627A29C2D6B14892D
+:107030005B232FBE105CB7DCC9E4B16383461E1529
+:10704000187DA5B07F3952991C5436C8103342B60A
+:1070500073F944F56917E80D15BB96A71869BDC506
+:107060003C1EA462EFF2142A1A4803EC5BB47E853E
+:1070700091F55FB14F70ACD5F4AFB657FB53FB3110
+:10708000EED2F733602FCF5F663FEA3CD4F17BD37B
+:10709000C747FEC7851502ED6FE4FB2206298F3C2A
+:1070A0003E6980F6BC434D55FF6BE18706E2D2C0D6
+:1070B0006DE41F63884B4317CD23287F53BC4D6E6F
+:1070C00061FA50F388A3C69A02CC3B809F6BB99FAC
+:1070D000B6763C3BB76ACEFFE011E0EF490502D23D
+:1070E00001F1BA8D8949A8072970BE5056C0DA97B8
+:1070F000D1F6C077CD2B191F5279A080BCA85DB501
+:107100007C02D65F2F28D07FF3DA12DCE7CB478AE8
+:1071100004CBD71F45BDA3BCE56812F02BE5CF1506
+:10712000B0EFD68E3139803F54BE53F9F87D99C502
+:107130008710B36328DC03284B51A2F2AF78983054
+:107140003B75B38C7CE719C9F8F2FD2D22F2F3C12F
+:107150006BEF98007CD8B941E8858F299F1684F998
+:10716000545CCDE275CA36317BE5E02A261FDA9BF6
+:10717000999E58B45A9E0CF9B27765C2FC5E4C1FBA
+:10718000BC5C7EEEA1A76C8CCECFBDF1EF14B9E94B
+:10719000A3FBE8FC6E7A8DCE5F09C3ABE8BA07ECBF
+:1071A000E8A7BF6E3AAE579543A5128B679AE35B8B
+:1071B000C8E27D2516F7F677CF2B621E8FA5D8C2C1
+:1071C0007244047A8F6771D2EB65A4F7487EFC475E
+:1071D000F9E89FC5D7DB391DA9F311F7B2F61057AF
+:1071E00016A070FCF5E69731AEF5CB578F4E013CFB
+:1071F00057EDA1F44BD7DBB9D9460220B7243FEEB7
+:107200003795CD22C68F132950788B4DCB9F2C3EBE
+:10721000A9EA751BD24DE53616775AB9E3781EC632
+:107220008B2C0A61DC95F755AE6F7A837940DF9538
+:10723000128B938AE4F7B1A94CFFECD8153B0DD61D
+:10724000216CDC8FE7AD954D77C8407FDDF223558B
+:1072500056EBE139A697D22F9CB3C3FCA60ED5CE30
+:107260006F21E2A96313E3FFCA16D96F81F96D5C40
+:107270008BFE6CCFC6B3181F5FF4FA16F423785A4E
+:10728000447D5CE44611CFB3688AE75691F189B535
+:10729000CD3578EE56DBC4E3FF22E2E2AA5EDFBB27
+:1072A000C34B4153F5AB5FD8411E9C6EDB60077842
+:1072B000D2FE30AEF0BAF3922E3EAAF77860973E37
+:1072C000DEB0E9711E6F38B99DE4F58C373C0DFFD7
+:1072D00080FD2635225E7363228FEF0E141647F170
+:1072E000E777DFFBD9F2F51A8893EFD876660DCCF5
+:1072F000BFFA6F5FAD81F826B2CF82FB94E7D5DF8E
+:10730000615CB1DA6E612AA3B7CE4DBFC0B8ECCED6
+:107310004F4D68EF74EE6DCF82F8B6CEADDFA5802D
+:107320007F6EFEDEEBD17F397F7B512A8922EFD53C
+:1073300014E8D37F1971E191F838D87C10E3B0BE1E
+:10734000FCC484F2AD3B7EB4A986C5E52A3C6E74CC
+:1073500073F4387C35CEB1B6F9969BAE0579DDCCA9
+:10736000F4BBEEB8C74BC58B7E48F17AF565E06F8C
+:10737000338F0B6E9A1C355EF44BF807C5D3CF5391
+:10738000F5F1A25F37CFFDF98B50D69CD86BBC6866
+:10739000E032E0A6C6F957A7BA5E4D053EDA16EB15
+:1073A0004D6378F34F12400FFC3A0BEE479C92432B
+:1073B000180712DA6B7240DC63E5DE8F915F3AB733
+:1073C0007F80FE56C2E3EC3B49F71F8B8716F83AE5
+:1073D000D7DB589C29873FC4A12A76FCCEE34D1900
+:1073E0001DAB71A8BDC59F0653F9FD617EEFA08658
+:1073F000DA4D2C4E3D1C972A8C047C1DD5C5F5AA70
+:10740000EB8EECCFC1E56838AE3A7A9CAF1A47D81C
+:10741000135F6C5F51E3A63BD7F2786BFA3D7318AC
+:10742000C4C9B1FDDCE3173E8E865F35AEFA0F119D
+:10743000F855D7D71B5FA8FC79A979FF57E1F26E01
+:107440002AF367ABF0E9F84B7439FD0DE7776AB7BB
+:107450007E9DAAB16F6772BB55859B3ADFC54D4CC7
+:10746000AFE8D8C8EC8748FEA6EB71458BB397D23E
+:1074700098FE5BDBB23F0FE450C7815D9CEE185D68
+:10748000D76E3ECAE274A9DCF66BE536617EE4C8CD
+:10749000FEECBC3F4F6BF4FE3C9BCF46EDEFB4E4FB
+:1074A000BA03E67FBA8DE951A79BC489FE28FD5F28
+:1074B000E0FB52F7BA6D468C9712ED31A84FCDB76D
+:1074C0008DFC242E095223C6FD342CE471420F3B5F
+:1074D000D300CE0DB61B09CCE751808FC6FF203BF1
+:1074E000DC04F43839ADB84054C2F355CB8D4906AD
+:1074F000E2D7E25F0A64827C3F92DF2E437F9F45A2
+:10750000F84D3E93C8E2543AAFCFBC8273A1D2BBD0
+:10751000DEADE6DD0F893A3F47AD297404F477F21A
+:107520008605FDD6E23E8B17FD666B2CB8CE83DB5D
+:10753000BF7D05E0D5F9731361E7089430A85C2896
+:10754000E3FE8BF6EDDFAEF933E899D0988E5FB6A7
+:1075500086D607FD7A732CDA035DDBE2F2509F7C5E
+:10756000E3C1292037CA600F033DEFF5547F03EDD7
+:10757000EF6432CB9FDCD217EF13546DB361BCE1E3
+:10758000C1ED3B6B41FE77BE1E0BC7D1E44B39F812
+:1075900037C87BF6C491B50AEA818A76BFAD2092DE
+:1075A000A2D5F3AA20AF8B7F2168A7A33F8ED27309
+:1075B000554B1CDE1FD1D4E3FCECCD60F7650219FE
+:1075C000C077549FD48DA396DF9AD69FDFEF0DFD31
+:1075D00084BDAFC0EA7B8CA15296F76530BE6DC307
+:1075E000FA252ABDF2F29EFDB2FA33D3FAEBEAA9EC
+:1075F000ED6B4DA42E1A1F54A709FC7EEF5F0747C1
+:107600007BCF22CAFCF1FBFD02F11A400FD86AC100
+:1076100038AE6A636010C4B7EF30B2F3916A7B6032
+:1076200010C4B7EFE1F2AF3A86E6E9F70C3E0FA8D7
+:107630000F79620EBE06F8AED969214BC17E7FC3B9
+:10764000E6023CD7ECF8F6E44B0510CF168B7EAB88
+:107650009A37FE0DF15F630ACC00FA0F6D35917514
+:10766000B47EC7D677B2408FE8900359091739F72F
+:10767000A96932E9CEB1D5759CAEF70F84FBEBEA70
+:10768000BDC5CA5EE4C5DE34A68F2E4F733D9D8610
+:107690007C6D75A0BC86FE44E8A76580F65E73A588
+:1076A000125D8EAD4A9375F768C5F03DC555D0EFB4
+:1076B0009724B83883A2A44608E1F979E5C6B34314
+:1076C000C11EFEEC6757E1B9D667C6D05090DB9F6C
+:1076D0006585866AE5F1A97AB322C9E897C0B46BDB
+:1076E000EDD9D20C02F1839669D1E4D396B4589CBB
+:1076F00047E543B151EF83EEE6F4B61A6830998D51
+:107700000B7E0875DCCF8C7E23CC23375DC1F2CA9B
+:107710004CBF11BE576DDC3540F7EE84E4C37A945C
+:10772000BF101E156485B1C0DA53AE542CB02A12B6
+:10773000DE8F96FEB39BDEC4309ED0C909716A1CF1
+:10774000877467423FA87A1F40928BCD002F232970
+:10775000764822A0DA877C1A439A30B5527584EDB8
+:10776000437504E28A4EF1F35B93A43C0DF2C374BB
+:107770004844797E29B8FD3ACD8EF3364975C489DF
+:107780007AC72407E8D582D74DBEA7F4D050BF7181
+:10779000C00976FEEF8278380C8DA3F3B33BDEFE92
+:1077A0000EF4034A6768677BAF23FE063A9E646463
+:1077B00079328EF8A39DC777703C10EF7E943F56C8
+:1077C00012FE0BD17C2C4A283A6EDCDF46829D6B80
+:1077D000759000E84DB1561288A5A935573AADE528
+:1077E0005F3B61F9FE949C41AE39C6E8CB23E99A30
+:1077F00038A5F3DD7251C4F6E723DA9FBF587B1535
+:107800001E1EF3806C76FF9DC12586AFC13BCE79ED
+:107810002108F0C8B33B1B008FC6D09107011E7929
+:10782000566627263512AD1D37209DC9AB4704B6D5
+:107830005FD2BF62ABA63FE230A3FFF4710EF7EE5A
+:10784000FAAA5FA5477D8B0470ED51DFD25BFD98EE
+:10785000E8F56DBDCD2736FA7CE27BE9DF1BBD7E06
+:10786000ED1B1FBF1750E023931B1231A8F7A00791
+:10787000A483BD157724A58451053B2788C05B0CE4
+:10788000D01FA58798819AEFF07FB91AFCF58F82F7
+:107890007F1240BA2BE1F3A1796B3A9DDF9D7CBA50
+:1078A000E3D7B373CCBBE7333FD29D0FB1FB424765
+:1078B0007FC6EEEDDFDDC8ECEDBB17B0733352CE03
+:1078C000EE0139E87F30DE3DD009C5F73D3EC11FEE
+:1078D000C886777022F4D7EEF776EE97A07E4984BB
+:1078E0003F46A527F5DED26CAE5F6773FA9C4B422C
+:1078F00036E0FBC87BF4CD692C2E8D9A632E58DFC1
+:107900005D7C7DEA3EE05D4E72E05D00D110E38477
+:10791000F31191DF5B257623BBB77A6B824EFE9C19
+:10792000CB51E260BF236FF2EFFC3DA2793728A96B
+:10793000DA7B5ED285587C7FA44176A6815C942F49
+:10794000FC9828942F8C17061045730F8DEA77C882
+:10795000ECB283A01F4772149332D00BE3399D25FC
+:10796000DDD8AD87BD4FE1326FB982F760EF486770
+:10797000FBCBD28CE2B94017A27DA4D36DED895721
+:10798000EF76B6BE06585F76CF7937189D4ED44352
+:107990006FA41A04FA7B9C66988F68523E56803F0B
+:1079A0007F2B13B0FF7BC281E1F35C52821FE25F49
+:1079B000E6D8971E01BA5D56EFC073B425F5399825
+:1079C0002EAD4F433D7471BD1353152E66A7CF25C1
+:1079D00052389B07B2FECC0E37D333E83E04F11782
+:1079E00092A32E007973661D01FDD7D20D1F1FC211
+:1079F000C7D89D7763DE04799ACA8D9310BEB43DD3
+:107A000029033F6A867B19C0C7A25C49140D5D98A3
+:107A1000D286E9F23DE0A6D2C71606BF2705461F6B
+:107A200091F07B526E53E0FCF9C91BBADFB541F807
+:107A300051759FC1EF37EC7CAE57F83912509F9DBE
+:107A400053B8784603FDF4043F877CAC7E24C2EB38
+:107A50007188EB1A0CF6810B5311E047E9C894EBDF
+:107A600025226D6F52D89C4DD66297A180D12EC031
+:107A70004FB432789AD2EAF03CCE6C65F012AD5E2B
+:107A8000848B6C65F012AD8CDE8C3C2F01FC866320
+:107A90007BFC4EE1D79C3E02F0305A072F63D2B8F0
+:107AA000CB83DF4A0A3F3A8F24CE5F917048827BB6
+:107AB0000AB961BEEA4DAF7B8EAE1FF6F117287C86
+:107AC000204DEEC57E4CCE607234C950B75F06784B
+:107AD0002410BEBF7849662161A18AF097E6250A85
+:107AE000E405360FB25E8F57D12145BCFBA6BC0022
+:107AF00074B0E21DD900E7A4E2821FEBEE938AD3B3
+:107B00005CF10AC2D32DC0FEFC44BD82F85B0E7846
+:107B10001C0CFB23B3C71EE5F87C0CF804F1CBF872
+:107B2000E349CE2F4F733E6970B2FB13CB26B2B838
+:107B3000ACA47C037F0F2D40B4714FF1CE2662A41C
+:107B4000F3421D5BC134807AC62726FF15B45D6CF5
+:107B50002E71019DC47FF2801FD74A8AD3412F8A9C
+:107B6000E7FA2F19A3C44FC78BB40189D921541444
+:107B7000A25DD36688F60E5683F38019FCA6BDCDB0
+:107B800067FFD41D4897A5576378304974174F9FF6
+:107B90004BF3D6C658F40FC63ADD858F029F37DA0D
+:107BA000904EAD74FE651ABCC7F682D717336E309F
+:107BB00064503A144169A3F87DA6718005E0FC9CED
+:107BC0005C9C0EF2F539BECF521C28DA73A80E2E3B
+:107BD00027ED0557EAECD915B20BDB39C6E8E5C04D
+:107BE0000A2E7713C6EBE95D95BB1F75CB5D773227
+:107BF000CC27E5C278E4C7A49BA3CBDF06D9E885F0
+:107C000077051A86327EF79618D97D989EF200FD88
+:107C1000DAE7DC83D6813C55E96B1161F2C74B6230
+:107C20009CB81FF1777454FD7809BC37C8E52CA4C3
+:107C3000E24023D24DCADD068CCF5BC6DFCB7A8A09
+:107C4000D217A43E4A5F905E9BC1CE33169987E15E
+:107C5000BB6D0D5603CA0BE95393DF0AFAEAFE51D6
+:107C60000EF02348B2B3CD05FE409BD4B48E40BD88
+:107C70000233BC2721C41738800EBEB1CDE977B1DD
+:107C8000383C8A4E01E8C891544C8EE5E2E901DEA9
+:107C90007B911D3713F02BBE90546701B8E5663019
+:107CA000BBABB1A410E148E13B2E2339DC4FEAB471
+:107CB0001BBBDFDB826E5FE8E5FECC940CAE476752
+:107CC0007AC9400DBF370A5C0F53BC2447C3F78BFA
+:107CD000AE9840E05CA927BFF722CF363079F6880E
+:107CE000105D9EA9FAA72ACFE40839A1A68BFB4D07
+:107CF000D4DDEF322639817621F51A288A24EFD592
+:107D00004FDE158F70980D7020693776DBB53FEC2C
+:107D10000F7A6561547A8B946373BAF775570AE0EA
+:107D2000E994ACA44E077A7AA7B77DDD558A74E84A
+:107D3000EBA3C0BEB4FF991FA35FE7C4333605E4CD
+:107D400050D985C7717F28BD300AD3F2C61B703F5A
+:107D5000179E9D5C08F4D0BEEAFABC4FC1CFE3B3D6
+:107D6000E1BEDDDE583408CF237DB10AC477B437D5
+:107D7000D2F2827039C48B8B9A780102DE77CDFD06
+:107D80006F52A0A05EAABE7B46ED3AFB68F00BAD39
+:107D900016F15E58E9B33617E89FBDD15FE9AAE84E
+:107DA000FE00D86BC1EF4A07CC013D7ABF7D742835
+:107DB00040FB9DB38E9D2334185D2703A0373D63A0
+:107DC000C173C88684E8EF82CCCDB87E19C881B96A
+:107DD00019AEE7104F56F64E69EFFCC0C63F098753
+:107DE000CC708EF5227F1F4572DBA7EACED9D83939
+:107DF000D649EE6721E65ECA6378B9D24BB99DC514
+:107E00008B1047F472D5CE880DDB194DB08E9AC613
+:107E1000338B3F4578713B83CFFB94CCE67DEA15ED
+:107E2000937F5114FA3FC5E3532A04065F950F4E22
+:107E300075EB476E7C0F27924E8575435E1845FBA8
+:107E4000FDEA908CFB4635A52FA4AB75A3303E5EB2
+:107E50007866D4D310377CFEB088E595172C58DEB1
+:107E6000F1B0F305887B0ABD2B13904FE70F5D1F20
+:107E7000C7FC447A3FF63D7D985C38C6E543E9850A
+:107E800027907EBBE9C437D708FC577AE12946DF43
+:107E90001B057CB79278ABDF1D3B90D3E768685F2A
+:107EA000317911C07B8C0FCF49CA36989CA00F4402
+:107EB000E2F95886A2F37B94059761BF84EA5F4993
+:107EC0009AF3F4533CCEB8EC027BAF9038BC240D4F
+:107ED000F881CBA7301DEBDFA1EDB044F7D39FE3D2
+:107EE000FA4FE9856B747646787DD7E1F752BEFF8D
+:107EF000970547613EBC9E1746455B4F781D63B0B2
+:107F00007E477CF4F1D3399C4FD6971317956FE5D4
+:107F10004656AFD477BF11E44EE9AAF80441B3AE98
+:107F2000B2C62A5D9C47D9AA12E32C4DBF613C2CF6
+:107F30007E77AC14C643FA4B0B272FB2825E502CCF
+:107F4000F7017E5A5751F85305FA63F2E90BD997B6
+:107F500005F2BABDF13E7BB47B13E97D22F0D3C8B4
+:107F6000F143F5EA020D7E54BC44B63FB9B6ACF01D
+:107F7000A7E08F5EC95E21E95DFE44E02D3B3ADC5F
+:107F80008675C32D07E38D2E0DB7AB7471453DE0AB
+:107F9000C6F1ABC245FD4EF5A8ABFA8C80F108BB2B
+:107FA000BFD3C8F07F297885C7E5F81F1B7D1DD397
+:107FB000BAD7B1807829A3CEB9E43A1E245EF3453E
+:107FC000D6A1E29FBCA2C3FFB497D6221FAAF89EF7
+:107FD000736025D2EF1CCA8F70DEDFEEBBDF1E2D73
+:107FE000BE685A6F781FE825B985FFF7F0FE85EC6B
+:107FF000CD82B832EF720BDA23A7D63D91A585F377
+:10800000DC8CB1F7005EC8FAE4CBDA3FBCE39C87B6
+:10801000C0BEF43E23A33F6D6B86BB0CDA97733B67
+:10802000FC91F80983A2E9078FD61F1A027EBA864F
+:10803000FA364C65AE5F12D02FB3515F72457BDFCD
+:108040006B491F26571EAD6F637E4FB39738B4F749
+:108050008909D39FFE93307F8DDACE28BB1DE03F88
+:10806000350AA418F53EC9BD24BB00FC1E49F95EC3
+:108070000DFC16F761F79196A51D70C0BD6213ED5A
+:108080001FFC39E64CE99CFE9C93E5F3854F45883F
+:108090006F96939A08FA4373E9770DBC8D496D3A50
+:1080A000FF74241C24B31DCF9B24C2F43975FDF446
+:1080B0000BEE4B8FF17D6905F76B3E5FDF847EFF32
+:1080C00045B176DCFF16F733307BCA2CE17B35A651
+:1080D0007856DF18C7E66D01BFB708FB6A00F336B4
+:1080E00078D147C4A7D104C8C71345807C22092C86
+:1080F000C67752C6067F02DF9D696E3FE0F19BF4B2
+:10810000B62302F8B18BDD8361FF6D14BDF90AADB2
+:10811000FF7331940FF5B268D127092CED07F1D028
+:108120006ECDB9167B2754D1FA0523F3FD164811FD
+:10813000E73D7F19AC2D5F9EE67A1DE6D16061EFC9
+:108140000C251D17F03CA7C1C2DE1B6AB0DD1E075F
+:10815000FBF86FFA30BD1DE900E8E810D367CE499F
+:108160004A5C02F3932A6FEAFCFC66E54DCD3812B7
+:10817000B7F7D653BA9434E72A03259701E8E60AFD
+:108180001FFDAE9D67147F5C82159FE58D7A9EA3CF
+:10819000CE0FE2F6018EE2850968AF45D2C39E6E2E
+:1081A0003FB357047C4E57DF2F961E61F978A2FE2D
+:1081B000A1FDF569B73EFA08CBF3734ECF2C768E4E
+:1081C000D9501287F171EA3CA6B73ED6067AEAF496
+:1081D000D6F4D970BE35DD3AE87348F7C8A103B1CB
+:1081E000A007DE2FE0BD923B7FF7A61C4BD3ED1F0F
+:1081F000AEC3FBCC9F73793A8384F05D783771F01E
+:1082000073763F7E9F459C3CDF24835D7F77C07FF4
+:10821000DB649ABBE74DFF6450DB661C0ABD056258
+:10822000C0DDE4988067086ABB16E7DB2CCFDA75FF
+:10823000AF5F32E37AC2EB35E3FAD5F5D19922FC90
+:10824000BBE1C3DF6B52E121CEA2EBA6F4323DEEDF
+:10825000F61BC945F4F2E9D69CCFD9A1099B4F245E
+:108260007CCE4311D51F3BFAB84826C5DF1FFAB8AC
+:108270000448ABCDA12CA93FF2890CF95AD1DD0FEE
+:10828000429FBFECEB1E9C0C70684BBC2CF979C470
+:10829000C2F8FF08D033C4795D48C275A9EFD01F7A
+:1082A0007CA0DD067AE7E2ED1FE33BCB3562F0C947
+:1082B0003BD01F2AA2DD74AE79F045EF9F1D013F30
+:1082C00015DDFFFA66AAF72CD93A674A8C4F663655
+:1082D000C7623CFECC05A2EE1DE9990B583C1F91EC
+:1082E000DAF26ED5E9EB8FF4DA0FF80B22FB99BDC9
+:1082F000A0881C1F0EE7B48EB1E83F58C3E86BF6A8
+:10830000789708F1CEA3970878DE3AEA84D212A4CF
+:10831000F9D9FE7827B0E7EC07FE6300BC7350DBA9
+:10832000C6FC81A9E2BDF90F839FE500DBC7217F71
+:108330002FD089D5A55835E7051D725D3EBCF7E7FE
+:10834000BDC7EA02FE2FB9D5F529BE17C1FD15EA52
+:10835000BEBAB3B104E3644BEE564602FE4B9A2C10
+:108360002E4CCD448AA172AC44226648538D44B24F
+:10837000401A43CC90162E62EF7697364E45FDC0DC
+:108380003EB2D808EFF196B4FEE26B685F2605F6C0
+:108390000B7961F894B4BEF31DE075AEAB18E31928
+:1083A000AFDA68D4D981439BF4F9AB5BF4F9FC8074
+:1083B0003E3FFC903EBF2193201DCD32DF920BF05B
+:1083C0003AB0D744F72288FF3361BCCB3181E1C793
+:1083D000BBC982F2B0A8AAB510ECE033AFD90C60EB
+:1083E00047EFF9EBAFF03C3CB42596409CD5FEDF5F
+:1083F000C7901888577CDDB20ECAAB28EEC07F59F3
+:10840000F5BA652DD8E13BAE54ED787F1EAC67C759
+:10841000DF587C4D6893C90FE7E36776FDE2353896
+:108420004F3BB3A90FEA57C704AF2106C6FF82F935
+:108430003F83FCBDB8207F2FAE6AA3DE2E9E97C976
+:10844000E44C70D13571D1F42635CD494BCC1D4F5C
+:10845000E7D6F5B86926F8810637EAE1A2D61BE22D
+:10846000D77F7F90F73F9A18C3749A0D7102FE066A
+:108470003BECBF2F477F277911E79F575FED6E27B2
+:10848000F277E288A2B9371596DF647E1F88DF0095
+:10849000F8F70F7FAF229AF968F49389BCFFAFCC4D
+:1084A0002C9E3989BFDF7FBAFE10EEFBDD7A5FBDFF
+:1084B000CB355E932F6DDC9F5202F6D3AAFD29B314
+:1084C00034F0AADE7430E52E8C7B92C0834BAAA7D1
+:1084D000BFF214F82BAA37894D304F2807B87534EE
+:1084E000BD65877A541F1E067E90B03E7ABD6BBC78
+:1084F000868FFF5EBA55F9AD9AEB2F3B47B64D809C
+:1085000038F5AA46C109D5AA9A6EBB6532C07B155B
+:10851000BBE75A28916291F257F5D6DB7E3C14E214
+:1085200066568F70C27C6817B7C2F7AACD67F13E56
+:10853000C3D288DF3D50D3DD994C2FA4F503065AF2
+:108540007FE9EDD672905FB4DF37217F20671DBED3
+:10855000AF623FC5CE1FE8F74F0C546F3935CEFBE5
+:10856000DE5DB4E919D2F4D164F02B35EAE991D299
+:10857000B7007A596883E05C875F1715DE0C2AB76D
+:108580006B21C6FBD2F299D1EE5B57F8F5FD44E2C0
+:10859000FD233E5FFA97A3A59FC87A8993BC184F25
+:1085A0005EBD80CA438D9FA0FA840FDF978C1C8725
+:1085B00068E99AE913440179B8C5A2BE7F24980BF3
+:1085C000799CEE0096C77715814E29A1545D49C666
+:1085D0002B00EF9BC9444847835C81F7F44736E59D
+:1085E00041FDDD42F09597B03F1BCAF10E4700DF19
+:1085F00099CCE0F74C3B1496EFE27E4EB5BCB2D579
+:1086000082713667BE34A29C5DD87410E3E83B5E8D
+:10861000B3180C541E9CD99A380EE2313B9AD83BC1
+:10862000C5A79B12C7192FB26F47CA0D753F3D0AE8
+:10863000FFA4FBEE9F335DDF64C23EF5088B574D10
+:108640004DACCB8FF6FB176ABB24635D3ED831A1DE
+:108650007BACCE7508276FB6847EF03427C40995AD
+:1086600008AC5F63BF62B12FAD6FA375C11F9D7072
+:1086700048C4DF6B382E3A7FE21880EFC9A31E345E
+:10868000A7C08DEF539247585CE56C8904244A6F6C
+:10869000B3613FCAC33CCAE5D9AB048C2B9BB34C36
+:1086A000BF1E782757BB8F56103F7BDF42EB47EC4E
+:1086B0000FF12E74BF81772DCD2CFEA272BDBE5D51
+:1086C0001509E07CAA377F6F8A06AFAF89BA2E57AB
+:1086D00026AC4BB8D98CF3BAEFB93876DE63242ECA
+:1086E000D84F43CFD950BE571137F67727DFD73D44
+:1086F0000F94B8E6801C5E30DB352711EEDBB2FD4F
+:108700000F4D3EE46F01F79DAAF124D097BDBB4108
+:10871000605FAD6A150243216F265EFB30F61DDEF9
+:108720001F80756BEFD794131F8E57BE4AFF9D7C39
+:10873000C8F05ACDEF3192F59AF2FEA09F317854ED
+:108740006F36E9FC3AA3370B5E1BDE77F537A4D012
+:10875000F9D59EA2B282409CEAF7265DFF10CF3386
+:1087600002F77D62A1787BAE5BAEFB87448BF33F63
+:10877000C2E1F8DC6DA5E9C0AF4F83DE9AC1013DCF
+:1087800012E516F71F9080998E1333BC3B8FE58559
+:108790008B587ECAEA57A6348EA1769EECC673A18A
+:1087A000D962F1DB701FECE57EEE9BFBD271661B9C
+:1087B0005C5912F2AD6B10FA43173038BC30AC6E16
+:1087C000485D143D50C5F3F3425300CE65BDBB98E0
+:1087D000FE652B08C9DAFDB5BA2F93477107827879
+:1087E0006F22B45DC07B962B85A3781F71E50D0ABF
+:1087F00001FB3E8DE209E4F14A813C2250B8143479
+:108800004FBDF72DC073418C137EEEA2A679AC58F4
+:1088100063C5F5333D2DB66E2D9CE7A4CECC19066D
+:10882000744ED73DF366FAFDDEBE0A8E976E65780C
+:108830004F5BE4CD86DF818A3B507CEF5BC0874392
+:1088400063F09E6C2A85952D01D325A07FA5918587
+:1088500002D47BCECEFA4F368833A7427E18CB2780
+:108860003C24B8D621F12DC7FE534D6422CC13BE53
+:10887000831E6906BF0296FB197E8BEAF2A1BFD464
+:10888000012C4D320632A19FC3DDF876A35D319FE6
+:10889000EF63F3B78E4D053BEF700735B8A9DC3AAF
+:1088A0009CA6EA43012BFE3ED4C01C569FDB85F3F9
+:1088B000F3D97D83A42C7DBD2ED915371CE4E807A0
+:1088C0004C8F3F6F75A17FFA1A63747FD64B7D99E9
+:1088D000DEE2B92010BF661FF04CFB06F54ACF055B
+:1088E00049F7BDA3DEAC8B73AE2E3F80F7EE6B482D
+:1088F0001BC661D734C5EAE276AF89893EAE4ADF4E
+:108900009E0B22F1461DD7A8FF7E21917813A3D597
+:108910004BD17FA7EBD0E55BBEED5E077C272383C1
+:1089200076B0072771BDB6CB6FF0CA5787F1D2E991
+:1089300008EAF69D4E85E5BBF8799C5AAEF6DF391C
+:10894000CDC8EF15B17795013EDEC184BCD87A164B
+:10895000FDD1D5ADFB27B0DFF76274A18593572316
+:108960003F521ADA0206CADBFFDEF7D453B94328B6
+:10897000891D50F9F8F4532ECAB729A241C7D7B1BF
+:1089800005DD7C8EE2E53983C8E5C299A7C68FD1A3
+:10899000E659FD70FB8E29E3A96E5F90CBDAFFB13B
+:1089A000EF97EF2D1A18964B741D59C5364DDE1CE6
+:1089B00091B7D2FC504DDE11519E14519E1691CFAD
+:1089C00064F53B6C812CD149487BDFB353A45170D3
+:1089D0008E1D98012F0A2C6BF86ACA789AAF296805
+:1089E000C3F899DA56C189C7FA6A7CBC93E959562B
+:1089F00067107FCF2EB6A0ED6D9003D52D8243A0DA
+:108A0000F46E6DDA8A7135D5D04ED1B46B6276676B
+:108A100075D3516CD76BFF3906E4E7A539C7B09E13
+:108A20007A7E7407E9FEBD8E0B202F6B9ADAD93E51
+:108A30001C717ED499EE3A88F230E2FEAB07FAB5AB
+:108A400086E95EADFF87A1ADBF836E62E79F5D28BB
+:108A5000D1FA7FAA691F01FA12BC710972FF79C1AC
+:108A60003F04F6E717897B08EC47F7D45CB1DF4099
+:108A7000EB1D9183ABE1A9864159969B242AA78FD0
+:108A8000D8827D052A4B72D624DE04F03C921CC4A9
+:108A9000171A7EB6268995F70DF68573D7DCAC1FBD
+:108AA000B2FC15C1D590BF75CD952C3F34D857A4D5
+:108AB000EDFB7BAFBA09E0BFC1119D6FFB66317959
+:108AC000AECEAF2CDF959605FA6635DB2FE0FAA522
+:108AD00099CAC51995A7B76CA07098F1D358945747
+:108AE0001B3A6EB9B118D7EF2D863837F6C43BDF85
+:108AF000CF502E4BA807A4C31E9610C6872DAB4D92
+:108B000041797F65DD56D8F75367E4A2BC3F9FE902
+:108B1000AACF1A114EBF1DC0D2FA2C76DF235534CE
+:108B200060BC41EA8336D4839EE6E749946F10BF68
+:108B3000568E8F61594CFE0DCB62765246DFEBEBC1
+:108B4000613D7772FD74C5E3FE4D160AFFDF0391A8
+:108B500024A17F1BF5DDBBD652B91107F114AE7409
+:108B600090077781FF37379C57F5F715F9346F0D6C
+:108B7000DB692BA6BAD2B571402BD6B27255DEACEA
+:108B8000C866EDD57D27B581C127F5E921EB601DCC
+:108B9000B112C1FB1773A70D5AB710F7EF9B71BE47
+:108BA000C4E54A07FBFB44457F03E8952A7E1ECBBC
+:108BB000774DC2F5882C5E5DC5933A7E3D5FF76CBC
+:108BC00091EEFF749D0FF673231CA93E90C7820B94
+:108BD000983E500F8ED8E4307C89141C01DFFF17BB
+:108BE000C1E95E58F73F0AA728F2E267306ECD026E
+:108BF0002A2F0C1A79C1E1F7BC1090530B34EF9770
+:108C0000D0EF6007DED1D7FD6896E61C67C68335D6
+:108C1000A8FFA9F38AFDB79D13EF203DF92C523F21
+:108C20003BF27BF332F4031A9B502E1EB991381796
+:108C300082FCE0E7B2AA7E59F8D3AAC360479DCB75
+:108C400012B19D45C5AB50BCB594C2E971BAADC275
+:108C50007D74EF5416DFA3EE9B2BF8BBBB2B1EB825
+:108C60000AE3FCBA48107F97CD3B92A0FCEB2E9F05
+:108C70003E08CB29BEBD16E0F78A18FCDD8115F948
+:108C800004EFD9AC987E2596EF51FD4AD3CD38CE6E
+:108C90008AA98C9E5654B0384CD847006EBDD1433B
+:108CA0004A03F36F10C995A78D077897E32FB62075
+:108CB000B8FD63D02B975950AF84BD13CF477CA923
+:108CC000381EC5EBF62CA46F368FD9CFA6FB97E2E2
+:108CD000B84EB4CF1FB3B94A505E3D1CABC0FC5771
+:108CE00059C812F3303047C82328F7F87C88EF05BD
+:108CF0008CF398C9F5B5CFCACFD9401F7893CB1B59
+:108D00002018B0976711563EEBA1D8A360DFCC7A4C
+:108D100048C4FB8564C9F52EFD79079D6B0AF8C729
+:108D2000F95F63C8067070433B3BF4FF9F3678CF12
+:108D3000C4FD10BBDF4BBCB4BD261EFA63E05FF080
+:108D4000B38B6CFEA43E5689F62EE8C75CBED3F901
+:108D5000BBB4E3A9E344F64BEDBB4F005E14EE0158
+:108D6000B807167A58E4BFD7AA9F6F9231F4A4854A
+:108D700096CFA817E3175178BA17D870BDEA7C6769
+:108D8000A686AE65BF0BABEFFF646C6D21F8C355D3
+:108D90007B843CA4B7C7C02FD19D17314E1AED9AE2
+:108DA0001EDFB93D1B690712F23793B65EF73D0D22
+:108DB0004588983FA72B4590006F6E1EBFD08DEF62
+:108DC0008879ABF034F48B0ECF2463B02FC82DF725
+:108DD0000213C221B2BDBAFFBD60215EB0131B05F4
+:108DE00001E9B1F18158DCCF8899E1D15319A30091
+:108DF0007DBE680C611C937737FBFDCF2E4B680757
+:108E0000CAA581CC9FD0F59EB816EA752633BAEE76
+:108E1000DC25737E22EC1D89F7C475582EB07E3B8D
+:108E200017C6627C14DCFF34C2BD4CEF9FEBC1BFA0
+:108E3000A2DAF1C777B0F714E0777BB47630DC9B29
+:108E40002D1F16960FF83E0CF0734B2CF713B92B11
+:108E500070BCBB6208C461D41A048CEBADADBC120B
+:108E6000EF9110FE8E73359F5AAD81DA83C3C27CB9
+:108E70005E6B383608ECA96AF3327CDF9996BF093D
+:108E80007618FCCC6EF7EF7864F7A4EBDA6567FE32
+:108E90008AF7DA9BF5F8AF0ED309DE8FABD4D24D4B
+:108EA00076981E50DF0639319EE0BD7C1BCFC74E41
+:108EB0006CF3839FC6C3FD16C907D8BBB5B682261F
+:108EC000027E53CF29A66F8C6E5D7B10ECDFF88994
+:108ED0006D6071D1FACCEF16797F6854EB7211ECAA
+:108EE0003A554FD1D895436E1EAA4DD97D5BB053EC
+:108EF00061BC207C02FE90D8FEF63CDFDFE83E88B5
+:108F0000F278AE6F30EE83B04F811C53ED5C906B06
+:108F100020475EEE376E5A3FBACE3C65DC2DFDD859
+:108F200039CC10D4EBBD9777DEA4D6037BF7E2FEF5
+:108F30003006B7D0CA382627E00740C14FFC5B791E
+:108F40002DBEEB0D8297CE77DEEA6C94BBAA9FA66E
+:108F50009AFBA94AB95FA794FB75C0AFAA8D7B05A0
+:108F6000BFA5365FCDF9BE067E4F0ADF0B3085E325
+:108F70005EC19F339E046C500E7E1D3BBB5FA76D90
+:108F8000EF21FE2209E9FC7B93EE5DAC156CBD334D
+:108F900039DE575A983F67F4436B45E6A462EB8D80
+:108FA0001BE6CA7EB420FC3ED7E71C4F2A5C8CFD32
+:108FB000C6DD03708F11D9FBE6A147D9EF5D9FA0F5
+:108FC000FBF356EEEFB8D98AF78B5D03212E417281
+:108FD00064DD1CE5775B97EEB6E03BFDCBFAB1F3C1
+:108FE00060F5FBB87EECFE2EFA8100EE0B6351CFEC
+:108FF000A660CE033A2AECAFEE97240FFC4F4779D8
+:109000007C67EDED5637F417E47EF195FDD8BEB5DB
+:10901000B21F7BEF5FCD77DB759C5ED4732CF0C7FE
+:1090200068FDD7FEEEFACC7FA2EEAFCF57C4A05CAE
+:109030000AD3AD01EF4FC6E6161BC18FB49BCB918F
+:10904000126EAFEF86035A90274DDCEF2C3966C0C5
+:10905000EF02ED3E958BF1924946265F76DF19438C
+:10906000207EEFD0E9579F788F969F3B65C4F7F03D
+:10907000E6707FEB6E78F71DE4E57613FA11AB8DA1
+:109080004C5FACDE3794E92946F74A88EBF66E93DD
+:10909000D1AF556DF76F7A05CBD39D14B3701F9484
+:1090A000E9B9BB6259FB18FF2F5F03BB735FAAD3FB
+:1090B0004BEB2F4873EF03BC66989438A29EAB0A23
+:1090C000E1FBA2C7FC4C2F3E068207C669B5F1DF63
+:1090D0009173A5CFA5FD1C7F3C15D743E52DEA4F25
+:1090E000C79F32E1B9D9F3DDE332FFE731B918DFC9
+:1090F0008B39B63DDF492D4BD2556C0C807FDBF3AD
+:1091000034D3E7661B9435001FB22FD6A9B3479F0F
+:109110002A63EF47543E34E562E7D820DFB5FEDD31
+:109120004E12CA427BB4BC7F13C49376B60E71B2A2
+:10913000E3AA343C24A9E5E7CB276406DFD05E1917
+:10914000E9F972FB07BAE8FE9D3B91E0EFB769CF02
+:10915000D322CF217AE6191E3DBB53B9DEA62FBF1D
+:1091600025D31D02F956FBCCB7471628305E08E51B
+:1091700021F1317FFA09D93503E8367E7C4017A703
+:109180006556185FCD36F1FD9E048C5A3E54CB0BCC
+:10919000C791A8E7362685E901367EEE1C59FE7F89
+:1091A00000F2988AEC008000000000001F8B08008D
+:1091B00000000000000BC57D0B7854D5B5F03E7360
+:1091C000CEBC92996426992493F7C93BE4014308E5
+:1091D000112DEA24040C98D209A062B538BC41C90B
+:1091E00043B0BDB1C566201102A2861A1128E084E1
+:1091F0008762D5367801A346EF8048B1D5FBC747D3
+:109200005BB4F7F78B4A29528188964BEFB5F55F2F
+:109210006BED7D92394322D8DBDB3F7CB0D967BF51
+:10922000D65E6BEDB5D65E7BED1DB36A602C81C159
+:10923000CF4C334B64EC1AC67F324F316FD0C69897
+:109240004555A9FC9A5321D37CC867AE0C99168961
+:10925000D40FE909230B59CA21DD620FEECCC29667
+:109260005E86FD2C9A00FF85A68B64D66629C3EF27
+:109270006A4FBF8BB193079C9EF5F09D7DF995CC0D
+:109280002A189BCB443D336BB7C431F67C9B14B298
+:1092900040BDB99BCD3BADD05FC56AAF6C87FCC00C
+:1092A00076C9B313EACD6DABCCDF02F93BF7977A01
+:1092B00064681A83E3603EE80CCA50FF9AE649EC02
+:1092C000E3718CCD37074D0A7C674F4B6C0FA3FEC3
+:1092D000DBB0FF65D02819E0F90A7FAE1F4A176F8F
+:1092E00036C364F9DCBFC27F8261F96CE8B7BB4B5F
+:1092F00066305FB617BE170E7D5FA6840E49318CAF
+:10930000D57747B4677F330FD643405980F0E832B2
+:10931000B13B7C369A74525D29637FC0FF26336669
+:10932000CAF48D53C763263769861DE65DC5E735E8
+:10933000B04F22BCD6B32613C37E3AE319BB3A6CB6
+:109340005C0B0B45437A520E50F922F3464A6BD41C
+:109350002C1AEF4ED66F6239D8EF80C907E3D9FBDC
+:1093600080AE2597CEBF06F960FCC87C3055F0C1B1
+:10937000B2532C742D8CB76C250BD58FE6A91DD25A
+:10938000450A0BC4005E17010E62451A55C6F1AAC4
+:10939000160EE16569509F477CAA6178463C869726
+:1093A00037F67C650ECF279918B3C60DD11908453D
+:1093B00070274D6A1ADB04705EB3322833985F4A17
+:1093C000BA77522EC01B5DCEE7DB78DC6251C760F6
+:1093D000DEC7B2A1DE176995CFE54179A3C2BCDD36
+:1093E000501E0D78E982EFDBAD2C80FD3F9EA75229
+:1093F000BF6E13E75FA3E263636D4897BE9001E918
+:1094000092C01CC88F1A3EB7DBA15D19B693A8DDC8
+:10941000607B0B6B8B0A6B5FF5A29531582F175E43
+:10942000B007CD509529FE4C27F497F87B335B0F9E
+:10943000F9B32FDA97607F678D6C7637D477C9AC34
+:10944000A99BF8650DE1FF8748D7F1C84D55A90CD8
+:10945000795F9A96CADC58BE9ABED73B81BF86A177
+:10946000EF607956DFCD9CAFCCEA4E18EF82B3FFA8
+:10947000079807785800F2CB550E77E3FE49637FD3
+:1094800004DF1B7D360FC7BE7F2CF2AB59BEE766EB
+:109490000BF0D71479E5C0BD308FFA749BC30C4D27
+:1094A000AA33FFE3B7B742FE93FD4666463AEF990B
+:1094B000349B655F0A87962E0D1A3FEA0F5B2F7764
+:1094C000EDD5E7EBBBF5F946A67CD4AFF101A06082
+:1094D0008B6A779D8C26D9E1F90AF8DB6C6E3AD558
+:1094E00005F09A5F327B56C1E706D5BF03D7538399
+:1094F00061E028E2D99CF9E9683FE0A52AF3CBA313
+:10950000A988FFFB9807E1BE60AD9C4BF4D862557B
+:109510000361F2AB51F07F67462D95776E35AB1244
+:109520002FAF1D0F726B092D61AA623100FE1B3730
+:109530004FFD441A4DE516A44727F029B57B4E0A86
+:10954000AE82764B362FAE65507E86054D1680E78F
+:109550000F623D35CABD532CF0DFCEB89A51285F5B
+:1095600094BF2A3EA4FF5AECEAEA217CBD34B83EFF
+:109570002D1D27002F373289C5E2BC9DFE97709EB6
+:10958000F5967E5325F473FD5FBF20B9BCB8F9D5BD
+:109590009C13E350DE78E712BD617E284716DF7B1F
+:1095A00088BE4B332C04DFC9745BD00CDF5FDD62F7
+:1095B000E679A789F227B74B945FDC2D052D595822
+:1095C000FF627C25CAEFED4687995D8AA748BCFCFF
+:1095D00071DBEF621880FC47102DB8BE98A329C636
+:1095E00067C7B2A69819A588AF1B3E41F9B578BBED
+:1095F000EC09A19C7ED9EEC963989F3C6AA10DDB62
+:109600007F1E5F89F8DB31D921D377D9877288290A
+:10961000DEBEEBE1BBB2E32A15D7CB91ED1CEEC564
+:109620004ECB1348E7EBFF2A13FF2B06E6DF674319
+:109630003A7847E1BA53B7ED9982F8FD635D8A81C4
+:10964000EA3F2B3107E2C3D99C88DF174B8A0FD73B
+:10965000D992CD4B6B59CC10DED7A832E1BD327315
+:109660006562BF8DF8FE66D477F5DB81CF71FC199A
+:10967000EFFFF656D710DF4B33364FBF06FB7FD2D6
+:1096800048FCA5F5D3B8EDDB823F180B019E160B05
+:109690003C993357E6E3F8975B0F8B5737E53B6C04
+:1096A000975F1783EB7D1BAC8F62C6FEAA4AEC2B3B
+:1096B000A0034B8B233D33D27AD4F493ADD0C0F5C5
+:1096C000BE8779F7409A64665E09E457769642E56C
+:1096D000D95926C287F297E57BDF04F89F53FDD165
+:1096E0005990CF64DEB1A867D40147552CF4664386
+:1096F00006294738CCC13D24E7200F78DA94C09E74
+:10970000581F066786E80FD6AB0BFB39FBDE974781
+:10971000118F0D199F8E46BDDD78F10B930AF4B4BD
+:10972000F54A24676D1E1F43FE68ECAD630B4A8645
+:10973000E463A387CBEF4BE44C9691CB33D700F592
+:1097400033359BCBB74E275F9F5B9BA38228F7B631
+:10975000BA8256043ABA3CC050BE4F2F973D08B665
+:1097600066A7F82C9C5E16EFAB4C467EF5C81E141F
+:10977000F17DDE8FDBE221FF66F9648F0C799B7748
+:10978000577B36CEDB6314E539019CF71B132BC9DD
+:109790005E99EE95695CB6242688AAA2CFFB8E6BF3
+:1097A000018CFB1DE67DE404D0B1069437D2B10FE5
+:1097B000C7067A9D71F827205EB4F97CDB33F591FA
+:1097C00013E1768697DB03F089EBB1F2E1F1305AD1
+:1097D000ADBC0EFBB9FE3A4E87D3CF9A83AB61FC8A
+:1097E000D356D03361FAE2B49DEB1D5F9624ECC2F0
+:1097F000EE0C94FB8379659401D7FD3D0E8E0F9797
+:10980000A93B03D7DB9F247D3F77B6CB2C0872663C
+:1098100069BBC48200E2E9A79ECF40F9FBC99EE77D
+:1098200033E685C117D94E4BBFAB8DD7F198D70220
+:10983000E3CD63DA78A1341C6F9EC7FC21CA0FD632
+:109840003ED9DB1F663F90840CABCF367B497E9FB1
+:1098500083D5887CA7B53BB724CA8B76E6396609E1
+:109860004A30D4BC5E3964C6FEBCDE5C17D0BB4156
+:109870006B1FD17FA7E01FA9470AD9A17E74C90039
+:10988000C9DBA516DFD154285A8A7484FA53918E05
+:1098900012F2ABD784F356242ECFCF387C7767C132
+:1098A000BC1676E8E9989EE5E0F375B8B83DD86057
+:1098B00053505F24B6326E077EDF10447DED8A8AF6
+:1098C00019CDC08E31A5B86D28A7AECF8F6A33C42D
+:1098D000E2F78C20D64F4F29A476812ACEDF81442F
+:1098E000166C95B0CB2689EC40473F53E07BDA04F9
+:1098F000E6580FD9DE2C6E27BA9967B34C7662B75B
+:109900008476A286074DBE23DFA0DC3B2D59886FED
+:10991000A45E89EC3ED9D03D07FB1D898FB644F08B
+:10992000D1967F321FED1A918FFC2AF191DB323CE8
+:109930001F81DCFC46F559C0A700BE9204BE1E166E
+:10994000F265E0FB16A21BFC4838DF5AD15FADC5BB
+:10995000169247939CF874507E433FDBC0FEC47D53
+:109960004A32DACF90A6B6CE55B9FDDED72F417F69
+:10997000D1575948EF3D60E8CB423B3FA9A8691F4A
+:10998000F247D29C92B256B24FD29C28F751D6E001
+:10999000FC1B9A27F9B81D00FD221FD599683FD1FD
+:1099A000706FA58FDB0135B43E1A375855D46793D5
+:1099B0007AB356217F34AE04FB08E56F4FD7964546
+:1099C000906F9865F3A09D62B5CC2CC176AC5DBF5D
+:1099D000CED649DD641707A6320FCAED734143C0E6
+:1099E0003806E56CFF8E1FA11E5F5AE209A8B8DE9B
+:1099F000045FE632D20B9D4E6F721CE0F5E0DF642F
+:109A0000DA17758E853CA42F097A76D679939D90C6
+:109A10009FB7C14A78EFECE2E5E7EC8020E83F45EC
+:109A2000E6FDB1580BD73397CA030BE23D7102D361
+:109A30007E36633E45CB773C46768CB6DE3BB3380C
+:109A40003CF6125F165ABEB7ABE3FAA260BD27CA56
+:109A5000066D531440BB3B1AC7E4792F0EF7A801DB
+:109A60000049C1EC7F6FAC9E189EE7F587DA3F3066
+:109A7000A33A8DF4EB6039820D7A57CB7BAD00C7EA
+:109A80005AFB50B902F6A4A54712ED27CC980CAAB0
+:109A9000F89C24C60F281BBD808F87AD4C375E38DD
+:109AA0007C4A44FF46E8DFA68AFA8152DFE45C8004
+:109AB000B74C6BBFAAC30BF03D6CD4F7472815ED2C
+:109AC00031A38DF7EBDCD7376E481BD2FF600FD880
+:109AD000B3C70FD9016BDFAFED180363453B3E37CA
+:109AE000A17ED5F479A34B223B2372BD2665F3F505
+:109AF0000A766D5236C90D6EEFD6A2BD2B939D3BF3
+:109B0000059756E34A1F43FB12EC86D46CB21B3E0A
+:109B10003D7908BE77CE384D767EE34585EC8F469D
+:109B2000B03FD06EB7F4727B96F51849EF6A74BFF8
+:109B300053C89F4E27E87DE4D397A5F1C8A78C357D
+:109B400065DC043468C9F6E6211CDA7E2C12DEEBF3
+:109B5000B2B95DDE5858B5251FFBDF2D31D4FBEBC4
+:109B60000B3F4A44FBA4B1F7C3C48561ED96F63CB4
+:109B70004A7858BAD738ECFCAFCB9669FE0D2F1C4B
+:109B8000F0E27A3F1D94682D2F5182EBD0AE5CB28B
+:109B9000C480961A2B0FCEBD15D73D9B6D627930D0
+:109BA000BF5CD44BB89FD83B33700DEEDBE0AF0405
+:109BB0009FB6FA16D1FADE3ADB62635908E7BCBBFE
+:109BC000090F8E282FE2617D6155328ED35037C543
+:109BD00081FE9346B0B3B0BCE1DEEF923F45836BAC
+:109BE0007D8FB106EDAF0AB0B7FE15E04E8F9B56E4
+:109BF000E381F5982AEF1BBB02F29B4690BFBFC9D9
+:109C0000E1F46C937C81EFE0BA7F41627BD4A1F2F6
+:109C1000CC1E6ED7DD9CCDED40EDFBCDD9DCDE9CBE
+:109C200018E89B84BCF78AD21F8DF66F23F37E86DB
+:109C3000FB4EE6B3A97B884E5CEEB85A54F22B5922
+:109C40005CFD0F8CC1F2890AED2798D2FF088E7B4C
+:109C5000769DCBB39E09FEC5FCBD2541DA3F64FB72
+:109C6000E7237D2B841D79F6851BC6CE2B19B29375
+:109C7000D6755983AB010FEBECEA4F6A50BEFD4538
+:109C800021F9C62C037D93901EFF1547FDAEB30648
+:109C9000D721FD031B8D54BE2FC5DF807C79AAAE72
+:109CA000261FF7C1CC16C8AF037E32BA3A18DA0BBA
+:109CB000B07D203F83C5E5632AE42705E62A12CA62
+:109CC000F908FB6312FA7968DF0083C3F72A21B62B
+:109CD000F2800B4E5A6809B47D153F648F1CFB72ED
+:109CE00096821F353BC560F12FC5A6D5B3A3988CCE
+:109CF0007CBF66E0A801E613EDEA233BB6BE5BA29B
+:109D000071EA0B9F33A1DFE4AE6EBE2E1BC53E0091
+:109D1000F09781F6C0DAEC68A1C7DB38BFB33EDA52
+:109D200047B367383D19837AF6F0FDC42AAAA7F530
+:109D3000675ACDFD5EF5C21F037290CA7F922D89CE
+:109D40007DED6A9176F0548CBB49EAF3CA88D7B1AD
+:109D500092279C6FB4F429212F620F0F4CC1F53B61
+:109D600000FC857E992D52DDDDAFC1FCB68C2FF253
+:109D7000A009E5067692CBF03BB022E0BDBCE7B38C
+:109D800029C8376070D37A6DE8A994EB6DA4B769E0
+:109D9000FF9814DDD485E5497714925E8D1AC7EEDD
+:109DA0009801DF7F2EF09A6CE37E2EF7EA40D6F220
+:109DB000121CDF77F76B387E6914F929938036F629
+:109DC000384ADBD12FE466AB24ACF7680CEF3FC117
+:109DD00020DF5157427297F2711EC9BB13D29E6C9D
+:109DE00027F76799590DC289DF693F069C81FB59A6
+:109DF000F473613F49393C3D9B1C5250406C65FDFA
+:109E00003BF6207FF6981D88A7DA9E5F1E477D5996
+:109E10006B61DD32DA2B1176C6CAF49987903FCF99
+:109E20009D39B9E37EF8F6E84D073D7EA28BDE7ED4
+:109E300088DC2FECC42AC923DB7BBFCBD6DB7B833A
+:109E4000F97FB8BDC7EDFAC09E68754F983C6F1496
+:109E5000FBB4734BCEC7A09EF97890BF404F570C10
+:109E6000D92BF376477F88EB6AD0EE8FB01B8E3DFF
+:109E7000111D40FA9FEFB6929F4E41BB07E0396338
+:109E80001FF80122C765F27925DC3FEC337A56438F
+:109E90007F8D779EFEB901D69DD205764F2CDAFBD9
+:109EA0006A2CC9D9D765B607ED32C5EB40BF870626
+:109EB000BFE29CE2F696A05CE4F35F660AE5931DC0
+:109EC00064624B281F13CA47BBE725A1779645411B
+:109ED0001EBE37BBFD7F41BAA598B9BCC276F8BD9E
+:109EE0004BD85B5D801207E2E538ECBBB384FEC65D
+:109EF000FDCF83E9C1F5E4C7B1103D3F7EC5BC137A
+:109F0000FD3C1F171A4226EE97203F96DAAEB0644A
+:109F1000A8AF1EB70655EEEFB21840FFCF7FF8AEE0
+:109F200037705F31FF15EEC79A7FE7CAE9B8FFF8CF
+:109F300078C61413CA9B85CC4F7EE7C58CFBA197CE
+:109F4000B220F757338701C7BB0BC4C6561435017F
+:109F5000C0FE55F05932486857A86D9027A3D9DB49
+:109F60005103E3CE6B33D0BE647EBBDE9F7E61FDCA
+:109F7000DD35A8C7D7B619B8FDD82E911E9FCFBC26
+:109F80006EB43B34BC16E4C473FF689BC18BE35CC6
+:109F90009F6322FE031205697E226D330A3FBC8057
+:109FA000631533843035483C5DEB506A86D3CF5A15
+:109FB0007F6DC6260BFAC306D20DE407BE60F2CE53
+:109FC000263F6A5C3E433F629BBDA9BD8697D39AFC
+:109FD000B9601DF051F9B50A37F8981A87F2323D89
+:109FE00087DB0F91F35DD8A1CF479E4F2C0DEAF38D
+:109FF000F399BF203907FD46FAEFE9395C5E5D58F9
+:10A000009F25CE013C740ED06654DFCE4279B54E0A
+:10A010002179B92A8DE3CB90CED36C67F56CE25FE2
+:10A0200027D817042F873FFB5A97847AB3CDC9F9F5
+:10A03000F27F0A7724BC37E4E413BC6D68E4C1788E
+:10A040006DEBA420C71787FB4AFD174B72F47268AB
+:10A0500030FF8FDF77727E5C278BF5E6203934CFB7
+:10A06000C1E7F4B1E4792284DF6D601F00DCF3D72F
+:10A07000C96568A74C9A69A37934BC62257F6BFDDA
+:10A08000CAFE0CB267ABFAF39B86C12B42AB68F2F7
+:10A090000BEACD73C13E01D76DBBFE9C0A342D0B7C
+:10A0A0003F779A99E6BD2F2701F7231FEFFB25D2B3
+:10A0B0007B9F95F413FCEF9019E5D70B596437E5B6
+:10A0C000A7F9EFCF41BD1E15DAF16416DA29DC4E8F
+:10A0D000AAEF3577A11D38AF2DECDC0BFFD9A03FDF
+:10A0E0000763ED71E4DF609DFAEF4BB645B4BBE466
+:10A0F0005C8CEBFB4D26FF28B4EFAEBFCE9B8C7281
+:10A10000F5CC520343FACE973D8B508E9CB1EAEDCD
+:10A11000EF33764EAFDD8374F6E4239D778F486787
+:10A120004F3ED279BE81F9C3FBA9473A037D970917
+:10A130003A9F3970553ED2F9D37D57E5239D3719A3
+:10A140003BBCB86E7665FAF7221E4F4CF691FD04C3
+:10A15000F22AFF9BF0E38B11FCF8E2FF1E3F52BB9B
+:10A1600091F4E1D19CE1F5A1CBA4A6A13C9C67317F
+:10A170007FAD5EC49F61FD6B1633F9255EF9F2F386
+:10A18000879E403BA457263B44EBEF15C59F837E3B
+:10A1900085578EBB3D0169E4FEEF16FB18B78505B8
+:10A1A000D0FFA1D9FD9AFD18298FDF17783C9DE3D8
+:10A1B000FD36ED1785BF7689E8D312FC9CDBA9BB81
+:10A1C00025F2C75AD46E2FDABD0D2FCF75A0BFF67A
+:10A1D0005490FB671B0E8C25FFEDD2E0ABA154B46D
+:10A1E0000B7B2507EE1F96EEFE3006CFBB613FFAD4
+:10A1F000494ED87E74B2D88F9E0A7E1C83E7E23027
+:10A20000FE54D4CBD1AE0113F26F03ECD3A00A6B92
+:10A2100050068E627F0D2EE609A0A8E8D1EFDBB4D0
+:10A22000F3CBAD3E13C9BBADBD5210F76989267F94
+:10A23000561AEA2796E6A0732EB15EFE33C79B98A6
+:10A240003B3EFCDCD8FB971C7EAE4CEDFBB7C4124A
+:10A250001FF61B9997EC802D7621971492537FDE81
+:10A26000E6A47D0FFD40FD3F07B328AFE9EB450AAB
+:10A270000B2980F745B3BCEF21DD507E8722E477C0
+:10A28000787EF03C9AF571FD02F23C34DCF9B83886
+:10A29000A7C6F3DDF0F60D6C80DAE139AFAE5F6D85
+:10A2A0001FC09AC6AA00F75DB7DB3C68BF34025FE7
+:10A2B00037970DF1E13231158D0F1B849FB771C9AE
+:10A2C00047B41F68EC911CE8DF5DE6E17CB80CF652
+:10A2D00049E6D197AE5BD60D7C1806F748EB785C63
+:10A2E000AE7E1D0FE6FF49FECCEB72F5EB579BBF30
+:10A2F000E6171F9C67AFC4D757C4BC22F79791FEDF
+:10A300006C6D7F78A572EDA6087CDCF4BF8C8F9114
+:10A31000E4DADCDC91E49AFEBCE01BCBB5C87383C5
+:10A320005CEE07C773033CD7FD9F9E1B7CA276247F
+:10A330001A480F7A75E7A968A7E338EDDB65B20F15
+:10A34000A6C8FC1CBADE6E263F6DE4796BA33A45C5
+:10A350009C2FF6FDF66AD49FFB8D0CF5FA12DB629A
+:10A360003ACF6C949F3139D461CE19954364BF7F45
+:10A37000D3F3F775B983E7EF5978FEFEAAEDF378CA
+:10A380007F185DAB4AC0D02FA1389661E5F62382D5
+:10A390004FA245FC844509306758FB91DAFD34979C
+:10A3A000DBCBAF8A381AB789B5637CC6C3F6682F92
+:10A3B000EE4BDC061EE7D392EDDB8E72D2A2723C2E
+:10A3C0003FFEC22DCC00F37FDCD84DF224506FF35A
+:10A3D000A05CD4FC305AFF56B15FBD52FE3F30C87E
+:10A3E000779CFF07F3FF2479F06FDA78DFF49C6C39
+:10A3F00033E046B74E189D87BD81E73B5997F2F38E
+:10A4000048FD8CC4D76FE7FADECC25B9E01D4DE7D7
+:10A41000FE572877A2CB073E467F0FDB6F5671DFD2
+:10A42000817E0FD2971B92B91E533C158867B0F7F7
+:10A430002A304EEA03FCEFD523DB87A706E513B7E6
+:10A440000F4F8D289FFE3EFBF04799BED3C867276C
+:10A450002ABDF9A83FD7DA017EDCF73DC5E36BB62C
+:10A4600059397F6E93385FB2E678CD7F42F30A3C6C
+:10A47000CBCFC723F98AE5E9F96A30FF4F96ABB62F
+:10A480004138FE97E5EA92FF8A413FE8C8FD04881B
+:10A490006E15557D84B7819725B633CC3FDDD8C77F
+:10A4A000E3D4D205BCDAF70BC2DE5D94E7CDC07809
+:10A4B000AF4FDFB358582C9842C8636897F96C7453
+:10A4C0003ED0D0CDE3481A56323A0F6E40FF6709AE
+:10A4D000FA05EB18DA7FCFA9FEC2BCF1789E610BBA
+:10A4E000C8B1E8379FC1D0EE3BFB1ECF37A8FE12A4
+:10A4F0002C6F5CD9AF3B87A8F8EAF335E8D7007832
+:10A50000C94FE042BF4D189D66E7F1F84B2DBD29BC
+:10A51000027EF4E313FF77CB41B417A3D53E3A177D
+:10A5200068D8CF8DB80AD94BFE7B76571C433E6A5C
+:10A53000D85F39F635AA6F1D8BF66EC5EF6B1DE837
+:10A54000A7F8F45A17C51F64C8FD4BD1DE3A92ED47
+:10A550009F84F8B09707A7A2BD9A09F62ADABF9F91
+:10A56000EE9B3A16E1D6E4DF26F47F43BF9BEC7AFC
+:10A57000FF36B378B3EE47FFF7CE24DA3FEE4BF168
+:10A580007F1BE7BFC9CAE10D6CB4F2F52AFCDE916E
+:10A59000EB5F5BF749B281C649BACD42E7D49A5C1A
+:10A5A000D864647E4BCE903C1927E2E9001F3C9EA4
+:10A5B000AFB78EC78188BCCDA58F6B3C9D33791C0E
+:10A5C000C2332E4FA1760B2D0312FAE1178AF3F94D
+:10A5D0001B449C85166775C6E15B80F8602B6B8613
+:10A5E000CEE5B3B1BD83F3BF889F89BEC8EDE86CEB
+:10A5F0008789F8C6DECEF8B912F00DD267E240DFE7
+:10A60000A458984F6E676822E2F3958B06C2875272
+:10A61000F7069DA7C422D9A09F9C0DFDEB0AD09FF1
+:10A62000E278F75AA48BDAE1A842D43DA7FAEEC942
+:10A63000A375DE5488FBCBAADF1879BCE0CBD164CC
+:10A640000774662CA378C1B3EF03BF665DAA0FB48D
+:10A6500034C056537C6076CF3BE4D7B7EF97868DF6
+:10A66000FB7C38CFC6E36F027D1487C626BA081F6D
+:10A67000CACBBF0FA0FDA1AC53C893D166F41AACEE
+:10A6800048D7558CFCF0799D0E03D22553C49D9C70
+:10A690007BE5BF47FB69BFA2F9F1833C4EC8D8BF39
+:10A6A00006F75FCAAAFEEB6005B3FAFD4E4303FA54
+:10A6B0003D8D030DE43779399AFCA3993D39ABBF41
+:10A6C00005F9CC76079350FEBC785726F27500E664
+:10A6D0009937CC3C9BF38CB45E9497A30DA8B794A8
+:10A6E0008D8CE21415676215C1FD28E4A19FE582F7
+:10A6F0006FB4F34900D78DFA68519E7F37D23B5A29
+:10A70000C801D61C45FE44BBC2FD1EF6E6F79F5DA0
+:10A7100005F91DC21F7BF895E219E4BF5BA7484805
+:10A72000870BCEB9990EF8FE8B3C6E8FD8953EE61E
+:10A73000B085E3FF30C56566BFCCE3D61423E713CD
+:10A74000659DAB0BFD835FA4F929FEF4DAB6904C4E
+:10A75000E75B8E138FD4A861FB9BCD5C8F34ECE557
+:10A76000FBEAC8FDCCE5F4C7B13CBD5D3E98FF27D0
+:10A77000D925EF0C8EFF77EE53987E7F17699F44A3
+:10A78000EEE72EB1BF23FA1BC94ED1E23CAA86C622
+:10A79000217E78D5AED941015D1C4C958D8FCB2C97
+:10A7A000FAFE9F12F13B5A5C4C62ABBA0AE3CF0748
+:10A7B000EE63E46FD3E276B4389D4015DF47040CB6
+:10A7C00020F7B2F07CA883E27352594892683FD0D8
+:10A7D000CFB07D12C6E940FBFEBC6C827F3BF3B478
+:10A7E000CB24175509E1B7627C473CC21DDCB20897
+:10A7F000C7BBC946E35931BE239EF611B48E537CC4
+:10A800003CAE73D2121E0F9A02FA17F329B99C2F8D
+:10A81000ADB34D14E7A9C56D68F11D1A5EAA04BE5B
+:10A82000530A1665E17E418B03D914157CCA2A634D
+:10A83000FC8790FB4B0D24F7B5F8BACE3C3588FC6D
+:10A840007E0EE3406D571EEF11895F2DEEE3FA7423
+:10A850007F72FE788AFB203DAAC56B68FC1246C752
+:10A860008015C6DFFA32B7DFAB969808FE734BA7A8
+:10A87000917FF1DC5203C37554D56BE6FC1731DED2
+:10A88000D6D92616C27E95A015E5A7C60797B35F51
+:10A8900081AE85E8BF3DDCB237E704ACF9232DDD9E
+:10A8A000949EB34ADDF2184C07E6A0A41AFD64C6D4
+:10A8B0004CE56A8C6319C8908075CAF6E6CEA27C16
+:10A8C000C2C007989FF6E4AC590AE8897379033B44
+:10A8D00024A8EF2FF87026E5912753189BF0C46F3A
+:10A8E000660668DEDC1F3549F8A3CC4EFFB5F909D2
+:10A8F000785FA07F4D1FF97D78DC3FC605223DDCE7
+:10A900003613D9376E118FC9AA457C269ECC40BE1E
+:10A9100035792C9D67DB98BABF0FCBD3CC5CDF3386
+:10A92000CECFAD79DC5F4C2A1265679AE65FEA0FFD
+:10A93000A0BC6ACD7252FB41B9BADF1CE47E2E3E48
+:10A94000FE5B074AE91C4A8B3365CC913EAB94E22F
+:10A950005174F987ADFC5C94298E74B41F5A8DC272
+:10A960004E15F9A834FF77F3C3ECA4B726FF4B09C3
+:10A97000AE8733077F948B72EA0613D8F1C3C8A55C
+:10A98000D4422E97CE196DED12D86D6FA4FAE7233D
+:10A99000BE8E47CF99E28479CD8EAF343911DEC0B7
+:10A9A0005332CAC904416FE72C0E9FB3DA272D84B6
+:10A9B0007E5BADB09EA17D825FF192BDEE9F25DDF5
+:10A9C0000470B74AC27E676A2CD9ED856A2C9EFB5B
+:10A9D0002D6B7E87E2AE652107642107DE6EE9CF2D
+:10A9E00055F240E5766F94D1DE7E479C3FBF93C51C
+:10A9F000EEA81B66FFBB299FDB873364B514F9C83B
+:10AA000075FFC4776A812F64932748F44BB7ABC8AE
+:10AA1000EF87EC15EE7EE847CABCAF1CE3965BD32C
+:10AA2000EF2BC7B81339CEE3F685E537E5733EAEB5
+:10AA3000C67A88B7E8A672D463FFB0FE62A1BF925F
+:10AA4000BFBFBFC17ECC1CAE6596810C05D6A7C723
+:10AA5000EDDF8A74BB30F7433A8FFD41CA5B1F605C
+:10AA6000FCC45BC68E49312887B224C1B7DC5E3B8B
+:10AA70005AA0F93D79DCFBD162EEF70439C4E32B2F
+:10AA80004BF93D9BDA598CD673AD88BB98E2E0F761
+:10AA900096A69467795A616AD3D98082727ACA710C
+:10AAA0005F0CD28FCDF297FB4A47B6C398DBA886DE
+:10AAB000CB95A96A581EFEDE58A8CF7FDBA3CF7FB7
+:10AAC00067C25F0BC2F31BDDDEE771DE2F493C8EF0
+:10AAD00033703573D03C5D5200EDA5E2E753BA8484
+:10AAE0007F97E20D7F26F673CF4F60549EB8D7B2A2
+:10AAF00013EF1F687E72599417BB9925338EF0416E
+:10AB00007A764012718B2E3A0B6207EF7670FC4119
+:10AB10005D13F47370AE4AEB38D16660D7E15A2FFB
+:10AB2000B790FDA4AD8B562BF037E0B122D512853E
+:10AB3000FCDE6AF46CC6BEE428B38A7AB532C6423B
+:10AB40007DCB3F56482FADB29A29F4F5F08351944E
+:10AB5000AF50980FE33500C45998BE65F4049B705C
+:10AB6000BE500FE7DBEA6424AFE40A13E969E89713
+:10AB7000E87A78A321C868FE950AC5630A98B57576
+:10AB80000723D1F7C7C4BA960D2C44722CC5427264
+:10AB9000EC08F48FFD1E7E5DEE223F5BA17A3B96B2
+:10ABA0009FB714D0FD9CC6C17B478A01812B1476C8
+:10ABB00094B397DF0FD3D6B3265F22D73348C15C57
+:10ABC0005722E320AAF80F4C2311F53E237B5E3B6E
+:10ABD0003F4CB768E58A17C7491EACCFEF67258A97
+:10ABE0007C6A4116AD37A8123294A1FDF1CBBF208B
+:10ABF000DF6AF261C7DA1F937CB814FF85DFA7FC18
+:10AC000034BB83E3BF200DD7A11C559086FAAED587
+:10AC1000E9517D61F9425846B3E3103F500FF233DA
+:10AC20006B3ECC55C2FC83A9052A094BA8E78D07CA
+:10AC3000380E5BD5345CAFC38C5BCFC78DFEC78E3F
+:10AC4000EB8671A1DE613B8C0BF5765BCD2143CCAD
+:10AC500070E34F5071BCCB8D0BE824A44E137806E3
+:10AC6000BE08A05FEAB0DD40FC394DC4EF1E4EE0E7
+:10AC7000E3B1427D7C4D6E148C4FFE587D3CCD0D72
+:10AC8000D2B636D4CB8F596376223FFE52F0C9D16B
+:10AC9000E81FE7A25DF5CB39F94750AE4C895DD589
+:10ACA000864C328D7593BCD1E4DE85E40F2B300FDA
+:10ACB000F2EF9A02A0FB0FB2DF9A839D1F713E96BE
+:10ACC0008BFA0FE4C3B70A122E855FE3470D6EE4DB
+:10ACD000435C07837C1801BFC6476C7A3705206E3A
+:10ACE00007BB1453CD4E65AC89C789ABE943F30369
+:10ACF000269E6269E2F3581520B86F703E42F168F3
+:10AD0000D78EF2FB10DED9633ECB50B0B27B6E0122
+:10AD1000EEC300DEBAFF9FF046DAE5978B97D6E0E8
+:10AD20008A5CC7DAF8D28CBD142FDD38CB46F1D35C
+:10AD30009344DC69E31203C511C1FE8DECFE066687
+:10AD400009A21CBE46D8D15A1CFF8B12F77F060EF3
+:10AD500098D53D61F6F8A571D42AC5690756F278F1
+:10AD6000EB417BBB9EDBDB837A4DDC1BE81CCB65B8
+:10AD700079E7DD2AC553BC24F1FA81B98CDBEB7588
+:10AD8000A27CA143C45BC05C1287E2D93BBB18F133
+:10AD90007FA73D9BCA5364AE7FD8B7B8FEE9CCE22B
+:10ADA000F664E7ADF9540EFB825188F7F932D8CF3B
+:10ADB000FCFC9EEF0FF2F878917EDA4D05DC2E1B3D
+:10ADC000B473443ED22FBB2BD3BF05F965618937DD
+:10ADD0004302BE9A6FE27E57E0BB6D7867A6863568
+:10ADE000ED5672F0FE45D3BB861CE2BBC789EF8AE5
+:10ADF00081EF72747C172C18CFE52F0A538DEF0664
+:10AE0000F9AD30325ECEFF148EDBE9ECFE7D03EE51
+:10AE10002B7ACD44072DEE31729D87C173C2C8E1F4
+:10AE200071C932C1B36F3878AE84FFC3F92D89710F
+:10AE30003E1F691D24292C602F1B5A071BDDFE10A5
+:10AE4000C23FB81ED6F07DE42570CB36E28B9B6FF7
+:10AE50009539BF46737D8EE74DC9307E9D18FFE65C
+:10AE600075BE6A27D6AB93080F75BDF51417C6AA31
+:10AE7000F9B99107FE203CAD42CE69E75BB345FBD3
+:10AE8000998E3A23FAE366D5EACF9966DBF839D68C
+:10AE9000CDB38C1F85DB3DB3D986CF308E71369E06
+:10AEA0004369F5818FDE2F183C872AC073A823C21F
+:10AEB000CF720EF81AF9FEB584C5DBEE06BE2BF88C
+:10AEC000694919FAE326272EDDBD11F24F6E2DA236
+:10AED000FC6B89B7DDF31696EFC8A77CB541223E1F
+:10AEE0003D57CFDB1756DC3A2D2B06E5BFE817D7C9
+:10AEF00013EED7A3FC9D7550CF3D3ABB0CE34BAB93
+:10AF000085DFE0DCDD8CCA6F1C63E721BB8B55F26B
+:10AF1000FB554789F2EFF17EDF18FBBB328C33AE75
+:10AF2000CE1E9883FCFD46D94B45983F227D36675F
+:10AF3000B873AFE24229340AF0521DC7EBD7963DF1
+:10AF400095827E98EA2A9E2FF654AECBC172C3F941
+:10AF500039C3DDFF8D12FB9EC1FB6C625D3FEFFDCF
+:10AF600090EEAFF92C9207A7E89BF021F91D984DC0
+:10AF700072A0EBCCE7CD52D0CF3DC9CBE350AB2C88
+:10AF8000AB92517E4DF79BCA319ED861197B04E389
+:10AF90000C6227548E47BA4EB230A22BF0794C2166
+:10AFA000FAB5AFFA2C230699CBA6E7738D8FEA3456
+:10AFB000FEAED6F331AC4F57E1F8CBCBDB91F818AE
+:10AFC000C6CFC0F6B3BFA5D73783FD45ACB7C8FE23
+:10AFD000479203F8132E1787E0E8A6759586D17D72
+:10AFE00039B8EE3AB4753706E13019FAE81E4FA6C3
+:10AFF000E429A20BAD133C16D24711706BF0A58368
+:10B000006C636597C2853F8A662F72081C8E441C4C
+:10B010009797433B2F8B1B820BC6BF1EE9C0D67090
+:10B0200078B64B4D5C6E88FD81E6CF68D0E6DBA339
+:10B030009F6F4514BFD7EE46BF13B6738D2DFA3AF6
+:10B04000B81B853E9D65F13D688639DCE49C4FFC6C
+:10B05000700B683427CCFF6FA9FE3AC447AB147855
+:10B06000B93F8BFCF114FF01F49E5118660768701C
+:10B0700045E2A3610479180977241E86E8D3978CEA
+:10B08000A9761F6E705E11F369B5F3F53A30DECC28
+:10B09000DFB550C01485FC9B5211C5A16870BD2955
+:10B0A00071BF6440E2F78F347B2212BEC87B7A1AEC
+:10B0B0005CE8EFE3700CACC23B820F166A7E3E4E3A
+:10B0C000AF24019FC9200D7B1EFE60A141F3B3EAAE
+:10B0D000E819797F4DC39B16E715892F2D4EEB920A
+:10B0E00073B78873E591EA4960A7A7C65D8A47ED03
+:10B0F000DC2E6ED04FC9FD4003F7DA490EC60DFABB
+:10B10000298F2968DF4FF21C52D02EAFAD81090084
+:10B110000DDE147E1F0DDF0F64F8B71492DEEE1FF4
+:10B120008FFE959F4C7D82CEAB3E30703F7D247E5E
+:10B13000F68C809F91F87D24F8A3D27C4FE2B8670B
+:10B14000A4BE0A2CECCC16E742CC9F85EBC1E9C823
+:10B15000AA44FF11C8D7AFBEC24D2B16015DCB3339
+:10B16000FDBFC076B730DF64A46F5C8DDFC8CF4908
+:10B1700018F9E1978BFDE364A177CF6FE3F11ED55A
+:10B18000DE518F4D44BBF198910569DD7B497FDE2F
+:10B1900025E03F0F2A3684F59FB193FE5DFCFA7CD3
+:10B1A0008AE328D86C187A4F03FE8E0A46E9DED36C
+:10B1B00028DE1BA7CB9776A7E8EA8FE9C9D6958F3B
+:10B1C0000D15E9CAC71D2BD3E5C7F75DA3AB7FD526
+:10B1D000F12A5DFEEAFE69BAFADF3A354397BF7697
+:10B1E000E0BBBAFA1F0FFA0F84DD10F0F615C2BCEF
+:10B1F0001788795F7F719EAEFD9F62A61C437E5CBF
+:10B20000B081C7A557028674EF8B7470FBA209FE4C
+:10B21000207D27B3018A076C084A9E10C3F836BD0B
+:10B22000FDB1B4A78BF078B9FBF805AEB90634B917
+:10B230004F170AFBE32A76158F67FD7ABAE6B3BC8F
+:10B24000BF8BAE66B79EAE56554FD7E8423D5DED1B
+:10B250001E3D5D6327E8E9EAF4EAE91A5FA3A76BFC
+:10B26000824F4FD7A4D97ABA26FBF5744D5DA2A7B9
+:10B270006B7A939EAE99CD7ABA6505EED4958F44DC
+:10B280006F4D9EE6B42FD7D51FA4BB6F09C537E518
+:10B2900075FC50D7BF46F700FC41BA17301187F94B
+:10B2A0003FA47BE1283DBD416F8D1A359EEC8D1288
+:10B2B0004C671708BBDE37BCBDA1C99F70FD1EBE21
+:10B2C000AF1D492E5DA2CFC43E77447D16B1CF7D20
+:10B2D0008F81BEA5413690DFEA56C19F87A338DE35
+:10B2E0003FC7A2ABA11ED4990070BD8770C338EFD1
+:10B2F0004515933FE2BBACDB88FDDFCEFA289DC34A
+:10B300000628F53307E9EF79CC43E902E63309FF74
+:10B31000C4F45109E8B7E8AF40FD7F61EE5B1FD090
+:10B32000B9D61BF157F40EC547787E92C7D849218C
+:10B330000F4EE0390AE4CF5A07F5ABEA0AC3DB49FE
+:10B34000E16F9C3749223DCDE4288AEF9A778B4400
+:10B35000E744F3FE93A78B46493C1E24226D6DD62D
+:10B36000F0C7F7473B47A904471AEB16F61CF3DB77
+:10B3700072A81F7EEEB1CB44FB58B785C3F7ACC4AF
+:10B38000940971741D8EE8EAB670789E35320BE22E
+:10B39000F369E65791180F2820A2F83D8C22E48F1C
+:10B3A00079FFF95636FAE9A2A25E98557D359ECB13
+:10B3B0000456919FFC7B4CEF27BFBD49223FF9F714
+:10B3C000004E48DD0E8F1BED7C2DFFB080B71AEBD1
+:10B3D000C1F7247793847EA97F587FFB7FC8EBFD5C
+:10B3E0009DFD0DF6C3385CF883F4D3FC9E85061EE4
+:10B3F00027317037DF1FEDFE1EE3FEBBE640650020
+:10B40000CF45653094308ECAC8EFC7EF1CC5FD9E8E
+:10B41000C9AC8FFC0BECA866D7FA49FE9688FB17DF
+:10B4200067C5B9E2A22E0BC3389D927D87E2F01C5E
+:10B430007111F0601FEA61C54FEFBF946C792D8EDA
+:10B44000FBFD8C4EBC57A9E9FF91F9546127C3EE6F
+:10B450003100DF350D677FBC5AC4E3035A5BFA46FF
+:10B46000E139A006CFFD2DC7282F2B1E86E797F8C0
+:10B470003E5478FCA3C905E561F24EB141FB303979
+:10B4800064B4F9E89195352D7D74BE6814EF58AD1C
+:10B490004D5BEEF087D989874609FBC71260B84F2C
+:10B4A000E02A0A53E524CAB5FF627C1F6D76433F4C
+:10B4B000E1F2F362020B3F1F686F394EF0AE91FC70
+:10B4C0007EECC49CCB4256A08F59C1BBC0F07DCB53
+:10B4D0000DC7308ECB645FEE09A923E3CDEC562E69
+:10B4E00084CBD3B723E4E94F5A068A719CD6967E63
+:10B4F0000D5F0CCF6B03C9DCBE6E6DF984BE1BC043
+:10B500003E447E7B754BC12115CA3F80BFF8DE8E5D
+:10B51000D9C5E162175DA457E7083E405F5C3AF089
+:10B52000CF07CD46E2B315E9363A2758F166DE215A
+:10B530002FAC67134C57FE06700F8DC3F16412F2E7
+:10B5400014F8C987F2C194A2D079419C6306D1E96D
+:10B55000EFED4FC3AFC9CAE89D2453BA8DEC822BDF
+:10B5600085F36FA3F83B4083F6C94517C9FF150261
+:10B570002FDABB4F1FDCC3C8DFB3E25EEE375C518E
+:10B58000CFE81E026B869F8A21BED1F44C02BE50CA
+:10B59000031F3B5A60C541170FB55898BF00EC1008
+:10B5A0008CDBCF19A2638757716288C1C66A571DA9
+:10B5B000A60F4D38D181E2EFE1895FF4618A67041B
+:10B5C00038BEA38905D13EA6B37F18DFB904F23097
+:10B5D0007E8C288FF1F37CAC288F9DCDF3E9DEE7DC
+:10B5E000A46A042CE23C2BDD16373517E5F402C6BD
+:10B5F000EF818B7720B60B7D916A8BABABC6F2DB0C
+:10B6000019DD0BD1CA7F2ACA936D1FB5E7A01E9919
+:10B61000A56FBF45E021C9F651C7243AF7D2976B11
+:10B62000E74A09B6F3C7A87D89BEFC51D1DE6E3B5F
+:10B63000DF3709CB73F5E33F28CAA36D5C1E321FC9
+:10B64000E3EF1588F20744B915CB717C0F2F97B53E
+:10B65000773944BD75020E8CA923BFEB28EE77DD48
+:10B66000D1622921BAB45C24FA3CD4C2287F6B5140
+:10B670001CC909430DC7779C8BF383A3990DFB4E1F
+:10B68000C1AD42AEC5A8FD5EEF30724F2B8F73F097
+:10B69000771864B789F8C96C137243ACC741B921F4
+:10B6A00035793893713FFDE5F81A16DA05B48F3213
+:10B6B000E007F93AED1E03F387C9CB946551CC1F1F
+:10B6C00056DFBD204E974FBC3D4557DF352B5B57AE
+:10B6D0006E2B2FD295B35971B46E960BFE8A2A2920
+:10B6E000D3956BEF43B0DDA29E58BFC6DC6B74F5FB
+:10B6F000CE17AAB1C8E327A782FEA178068F05E579
+:10B70000C3727B7612EA9FA75B2610729E85750531
+:10B71000462B7BC6C9E3DC9FC1F34328FF598B97B7
+:10B72000BEEF817215D25DB0EE54A8DFD5E2A0FC69
+:10B73000E32D6E4AB7B7A894FEB4A590CAB7B47803
+:10B7400028FF18F48FE9A3D00F7E7FA4A586F21BF3
+:10B750005B7C947FB86536E51F6CF153FA40CB12E1
+:10B76000FABEAEA589F26B5B9A29BDBF2540696B15
+:10B770004B3B6F57C4F5CC33E25EED3395FCBE7C9A
+:10B78000241D3B8B841F52C4ADD887E2563A8B30C0
+:10B790006EA5BB9FEC702D6E05E74DFD59F9FC239E
+:10B7A000FB7BAA88DB6F45AC6F55345FCF743E9C42
+:10B7B000D7E3591D0D7C9FDAC4E990D53340E5C924
+:10B7C0004B382D9E12FCC95C01965641510254EF34
+:10B7D000ACD45715CDCFD529CE91B9619E15E2FDD8
+:10B7E0002662BBA001E1522670FDA9D17570DE4E24
+:10B7F0000E27CE7F3878F70B78E5F26EFE2E4B4D94
+:10B800004708D93ECADB44EFB25866FB420AA42E71
+:10B810009F9FDE8928BA38053667206F2E5EC75491
+:10B8200048D396E9F76D290BCA74FB22F9E2434C21
+:10B830000539602BD1EFAFA27297EBDA59D27EA80F
+:10B840002B37B956EBCAE7DD95B5C68DF84CE5E761
+:10B850004BE60DAB5832C0B5B07323C1F59198C714
+:10B860005949A5FBE5817D5ABC05DF5F3C29F40BF6
+:10B87000B36C207BACC0C9B3F9B10103EA874FFFB9
+:10B880003596E4D2138F1B82E84706F164C0F55F5A
+:10B890000C661F9697B27ECA63A80CE6C73255C6DF
+:10B8A000FC383640FB2BD85FBC5F8471ABB2FF71B4
+:10B8B0002BE4CFA4FB9FE4717321D29FF9829EF900
+:10B8C000DA7E6AB312E95FEE2F22FF8DFE7E5D9B6A
+:10B8D000D85FB459B99F6E95B32209EDD6B323C48E
+:10B8E00039DADDAF1E5D00F8B6271FA274D02FA78E
+:10B8F0001A86BD3FFE4504FF8F026617FCFF05F266
+:10B90000FF99F2B713D10DD5903B40EBE0ACE47555
+:10B91000CF45FCBE2E737E841D17CE4F11F855F611
+:10B9200055BAE7021E9537733C013634CE132DC746
+:10B9300073300E41CBE78B38DDBD2DC9B9D561DF42
+:10B94000D5624EC742D65783FAAAB0C4E00962C78F
+:10B950005E87CE8F61CDEDF0E27B084A19F3A098A7
+:10B960001BC53A56A3EE56FE26539C9572F86AA65E
+:10B97000C27EC6660B318C4BD3FA65C21F728F90A4
+:10B980009B5F38AA63E99DCB9441F9873A927D6128
+:10B99000F3F6211F7DD169E4F33AAC2F2FB471BFC8
+:10B9A000E1A242535095F05DB50E7AC751D921B14D
+:10B9B000B42C846312E1811D8C263E8CDE3C9A05FA
+:10B9C00060BD943BFD9662F4DB85D483861CC193F5
+:10B9D00050AFBED8B413EDB302C48B0DF1726B6ED1
+:10B9E000350E9D5B48F85D28E63DBE98D3AB2D3DF6
+:10B9F000021EE6F1E27BA78B3A353F8E7E9E0F96C4
+:10BA0000577D07DF856CED93B95A8BC0E77A63DF0A
+:10BA1000E8B9D0F5997E804B2638C717A30DBAB97F
+:10BA20008205488FF3F9D53F2EB1AD5924976A4866
+:10BA30008F8F37B0F0F3532D9D58CCE5EFB1221E18
+:10BA4000876A771F257E1CCA1F39BA00F0F1B481BE
+:10BA500015D2B9B181EF8FB5781D19FD0078AFA16E
+:10BA600058C845D6C6A6A1DE761A28FE54EE8AA28C
+:10BA70007BB3B253A1B8F7365BB5E34EECC7A1D0A8
+:10BA800039D11479621FDAD166A7611CDAE14776F1
+:10BA9000FEB00FE386E47485A1DFABCDA1703B243B
+:10BAA000CD40F1808AB3DA82E74AF9B6139588CFA0
+:10BAB000435D3FA07722E4EF8B981DE117330A9294
+:10BAC000B5B126EA3F90A688F766BCB56313C59169
+:10BAD000888AFBA19A4F70BF7DC471DE8AFB02D5B4
+:10BAE000B688FC81F715F37DA211CF0F21FFF8CAAC
+:10BAF000F34E945FAF77AD89CB427B3AA8902D523D
+:10BB0000F8D7D6147A0FA1CB44EF356878CD0C283E
+:10BB1000BA73C8F4667DDE1C711E698CB827B75CE9
+:10BB20008C8F2797A1B0F918DD7CFFC65C36DAFF51
+:10BB3000DC572CDEE914F97B447EAF3190E201FC46
+:10BB40001CEE5A9489F3BAF0829FE2CE47B2FF27E7
+:10BB500015AB62BC80D540EF0287AC1887BEBB85B1
+:10BB600079D0CEB30415BA07B047C8B35C1BE7FF62
+:10BB70003B4AF87A8D4C733BF8BA539E890A4623A8
+:10BB8000DD1CDD650158E7C5AF4E652AE8C15C875D
+:10BB9000D780FEF7DC669307EDCF29BFB0119F9CDD
+:10BBA000B7F1382EA5F90115BFB7EEAC2854C3E0A4
+:10BBB0000EB6383C289F76B6583C181B1F1C41BE59
+:10BBC000E6380D143FAF1A783CE72EB11E7715F317
+:10BBD000F788760A39B34B09CC403877013D316E8E
+:10BBE000FFD0066E1F2F5F65213896BF9E43F6D5A6
+:10BBF00048787BA2C5EDC94578361852D05F55B953
+:10BC00002E773DBEDFB1DCCEDF3796638B1EC3AB34
+:10BC100011ECD74686F67C6BCC359EF961F25D8ED1
+:10BC20009D58887C25CB8114F4E7F43C7DE1268C7B
+:10BC3000E705FA6DC57CA8F8839B307E77AF3D9011
+:10BC400082F1BDC78A3FE2E50981AD18DFDB577C91
+:10BC50009297A707520C903F5E7C9A97E705B662D1
+:10BC6000BEBFF82CCFE3D91BC8CE53C5E76F0AA0DF
+:10BC7000BFC5E4598202F9E7007F092CB16E919E9D
+:10BC80001678D1CA9FC3EFB001DB2FD2C8F283A2CE
+:10BC90005DCF08E52F8AF2DE11FA7F45B40B8DD017
+:10BCA000FEB068776484F64745BB632394FF4A94EB
+:10BCB000BF3142FFFF2EDAF58DD0FE6DD1EEDD11E2
+:10BCC000DAFF56B43B3E42F9FBA2FC3F22FAFF40AA
+:10BCD000D4EF17DFB3ED1BDE47FF7D36C811944B61
+:10BCE00085F60D71B8CE77B69713FFB756F0732A65
+:10BCF0008DDFB32546EF0EDF56C2DF3BBBAD84CBF5
+:10BD000071A584F339F0E1C3C877CBDF94299EA8ED
+:10BD1000D5E039154439BADE40F6C0F2D7F97E7D58
+:10BD2000F93A25187E1F486BAFC1BF06E103C66D07
+:10BD3000C314D6DB97C5FC9CD1EC767B6AC3E4992F
+:10BD4000D1A1CF83BC602877417E53DC78E1BAAAC9
+:10BD5000F6C2723CEB339005A2D45B42F88E886247
+:10BD6000177AC151DE5188F0D9147A3F4193F3CC50
+:10BD7000E6D6F935DA6C0ABD2727DB79F9945F4CF2
+:10BD800074A09DD5C6FC7D5E6CEF56C88E3FD45E18
+:10BD9000E640B967B22F70E0FAFDB894E3BDBAA1EE
+:10BDA000300AE5B5FCA081E4F711075FEF3BDC3C0E
+:10BDB000CE0AF40ADDAF0279ED411D51C042AB500D
+:10BDC0006EEE7DE8E05CEEE763F6B115747F493B0B
+:10BDD000579794B07D406D09C74FA6D0230AEA1744
+:10BDE0004877958B7B3701EE8FCA54983B35ECFE34
+:10BDF000706D89CCEF3D69E7A1722DBDAB95B15255
+:10BE0000D19D23A4DDA3CF9B22F48612A15772DA21
+:10BE1000414EEACE4F1CBAFCB74A849FC7C33C6868
+:10BE2000C74EF9C5069287E751BF4923CBBD41F9FB
+:10BE30002BE4F12E4400CAD100BFDF7E6843D9AFA6
+:10BE400090DECBD719E83DEB2B95A30AE218F090D2
+:10BE5000E797482FC0845270DF74393CE4197D7134
+:10BE6000F4DEC765F091F768791CCADB3CBF42FD80
+:10BE70005FA2372E83AF6725CF713FD2D11925EC52
+:10BE80006A6000F4DBC54575E1F9BE49F853B43882
+:10BE9000652549E1EFF58B7BB2B2E0E3FB99578D65
+:10BEA000CBC1F78A9AC8BFBF62DF3D6EB4DBD71A39
+:10BEB000FC0ECC1F8B9B3680E32C874D3FE26F2F0F
+:10BEC000F641EF72BE7D33FA4DBA8326ED5DCD109B
+:10BED000FEB30FE38FB4773BDD64AF897CD5CDD55E
+:10BEE00030DF6EC5518C266847C9E44D46B049F72E
+:10BEF00099D8607DBCEFF7F41183E8EFC64DD520EB
+:10BF000097F64531DDBBA5FBD0CF4EF9E99BF09DFF
+:10BF10005218EF4619F6663B9F99B5C976F5103C65
+:10BF2000BB9FFDEEA655E8B013FB1427E3EFCD9FB2
+:10BF300051FB6390B4B05F595F82FBF5AE1389E1AA
+:10BF4000FB75AD7EACA8DFD03BD0F08C4AF53B4A08
+:10BF5000801FEA7B06624A08DF0315E1F563841F50
+:10BF600020ACFEA6AFAB5FA8C1F3CCDB3797F0FAED
+:10BF7000DBB0FE59B53F91627A22E089BFB4FF9DE4
+:10BF800004FF08FD1789FA67426F53FDB3AC3FB158
+:10BF9000348BDA3D85E39C7BE3ED0A31EF443CC70B
+:10BFA00079D7E6FD197E6FC13E707FA734A9F8BD31
+:10BFB000DBD2E140FBCD6AECF0A11CCEC5F7C72671
+:10BFC0000CA5CFA2F2187FE9F7487EEEB6B0F85A7A
+:10BFD000E4D76603ED6F7AFA0D0F205FEE489BE819
+:10BFE000C0FDF33E535F5909DAAF076C64BF1A32E4
+:10BFF0003FB5A2DFDC5CC0D7BFD5D9E42981BC3511
+:10C00000BD84DE0F95EF5DDE4DEF98DFC7DFF752A1
+:10C010007E6CF2EF46FE0A2D2F5C18B6BE7797F2C3
+:10C020007B96EB5EB36DC0FDC13AA3A7A300ED7094
+:10C03000BB42719FCA8F0F4E23FBF0E70646F21FEB
+:10C04000E65905FDB6CD55E8F7300C94CEEB2B2123
+:10C050007CF87C55502F234191F07ED0FD8ACF8211
+:10C06000E71D6661D7EDF0F0FB61DAB81784FD7962
+:10C07000A184BFB7B623EDC27B8B5DF8FE8389EE4A
+:10C0800075DA961942A618BCE7B6F3D462A46774B1
+:10C09000FF3ABCE71C95A238707E3FAD85323A97D7
+:10C0A000EBA6EF817A03ED1BE29719BCE87F8CCAFF
+:10C0B00035E9FC1D361827DC1F1233DAFF47A4E7E9
+:10C0C000B837951B11CFEEBB0DF43EEA83EE772D0A
+:10C0D000068033A65CDFDE3151DF3EAE5A5FEEAA4A
+:10C0E000D59727CED297BB6F3745F875F4F9268DD3
+:10C0F000AF4026D8404F45F1221665BBD082FB9E4B
+:10C10000B5AF4531A2CFCA4D1D05B83EA307085FA4
+:10C11000514551E417589B6C22B9BEB694FBF50FFC
+:10C12000A79B6EA43CCC0BF96347DA51DA8F5C8293
+:10C1300017DBA9BF62FF3616F61DFDF2A3BD9652AE
+:10C140001E57C3DC15E8C763240F9F95BC9E438828
+:10C15000EFB7B8BF624733F7633F388BC741D20CA4
+:10C160002A70BDF3FA31960D7DB82F8BB1B5DF8DF6
+:10C17000F19D91784D14E70D3BF0762FF29D9FBF16
+:10C180001BBD46BB6785DF2BE8D604BD8B366BB481
+:10C1900078EF4FD809B1EEF892B6B0FB1A89C26FAA
+:10C1A000F2F0C47956D41FFBC43B2283FDA9342886
+:10C1B0000F79457F54A9E6AFE1ED3769E73C229F4F
+:10C1C000E0E4F97D47E26EC4F5B569565C19EEF717
+:10C1D000D70AFB2E36CDE41D05F37AE49829208D8D
+:10C1E00081BCC28E18C12ED817C7C735BD1E15C059
+:10C1F0007B818FB8CBE99E61AD80FBB94ACF3BB85C
+:10C20000DE07601DED84FE1F7179AC65E2DC340051
+:10C21000F051A8159828876ACB68BFFB88D763457B
+:10C22000BDF9489AC78A71DAD664C581716B716E9F
+:10C2300085DE897BC4E277A0FD13078AD484E749B1
+:10C24000E91D53E97E1DE0DA50C18F1A98886FC44A
+:10C25000F8C27881CF1DEE050E7C97C195BBFF5FBC
+:10C26000D04F1F8FFDC5F0768827A7C0D3AC52955D
+:10C27000E07689FEE3173C47F5F1A7AD22AC3F41DC
+:10C2800047D35416C47D9A36BED6CF60FFCC4BE759
+:10C29000006B7EC5F1B62A9DBF8F65BA8BD17EEE4D
+:10C2A000B94AFF5EE4B381E428927729EE942AE448
+:10C2B000A394635B67E0BD8B35BF8AE2E32CE4FCAB
+:10C2C0009EA230CB7538EF04BF03F118B95E938F8F
+:10C2D00074D421536A74895CBFC90A6B97E32E5DDD
+:10C2E000C7C96E5755FEE861D673C47A493E36F029
+:10C2F0007DEC3F725D6F8FFE602CD72361DFE5CB55
+:10C30000E7DBA4FE75248793155A67E911E3E13B47
+:10C310007B98979841C5B8E8DDA54EC1C7A0974A5C
+:10C3200091EF1D936CFCBC9DF8ABEAF90DDFFD3578
+:10C33000E42FE0EFF3815AA9C73AFA482FF6F80B39
+:10C34000B0FE36C5FF38FAD3B71D4FA2F72BCDD1BB
+:10C35000FCFD5153C47B299ABED85DCAFD486AC40E
+:10C36000BB9BDF34ED4E4B2B7678B0BFB77F6B496C
+:10C37000F8C7DB3F6947BA57D9604D3F5372F32680
+:10C38000BCFF6C7D93973F0DF980827859467E976C
+:10C39000C31977D2FC5BDF33933FAB54F66CC63CDA
+:10C3A000FBBD95FC717B0F4C9C8DEBA4D55EA1A2CF
+:10C3B000BD7F40ACE37F1569E4BC6493C78FF64052
+:10C3C000E4F7674B35FF9BE77817D0B7749789DEA2
+:10C3D000711A8C8FE8B2F2785461872E10F26CC11A
+:10C3E000C1F5198718BEC351F75A29B45F60AF4E23
+:10C3F0004478522F4ACC0FF26F9B389F4D753D27E2
+:10C40000A19C49731DA944799FCEFA56A1DC486FBF
+:10C41000D29F97A55E54A8DDBE142FF5873F18075D
+:10C420006A62624DC7F9D92A94F329FCBCC5E48835
+:10C43000E271A1EE6ADD3D6AED7DDBB7851C350159
+:10C440004E8D6590DA147E6F3FA2FEEF443D19FDDC
+:10C45000F6E8FC771C3D4EFDDA944FC3E34D715F67
+:10C460004A426B193FFF043C05701FCA62E3F8792A
+:10C47000A9D7AB86C7DFA682DC359761FC4980E28D
+:10C480004492C5BD082DAE0730E044BF9B16F7B1FE
+:10C4900093E9ED112DD5F6E7B9CD32ED3B8A5FB5C5
+:10C4A000F2FD413B0B5A25F48731923BB91BF8F959
+:10C4B000B4E617BB0D1713EA257C0F97C6EBA63819
+:10C4C0006ACDAE02FA92DC5917F1CE94F68EB661BF
+:10C4D00034E78B6D2D0EA2A3569EE68FA4A3FE9C7F
+:10C4E00053AB977A3195F9E3C3FB0D527FA9CDFB8E
+:10C4F000891F522F6650F9B616F532FD678FD07F2F
+:10C5000032F1CBC8FDA751F9F6D0BBCEE9808A9FA6
+:10C510000EEC77FA54942BA1A99E61F09C7A8F5E61
+:10C520004E8EE9D1CB5D0D2FDB14AFAB0EF0BDED20
+:10C530001E83A78B61FCA9BE5E4DD66F9CFC5D6B14
+:10C54000AD7EC83513EB2FE3F5BF754A5FDF577932
+:10C5500020B23EC177FD457DBD48FA44C20B70252F
+:10C56000DC1406D7248BFEF7DACD9E7B095C09B775
+:10C5700084C175835B5FDFBF6A78B86E2C347F2D12
+:10C580005C5ABDEF4CB8B27A91F39859631E01EF33
+:10C59000BCFE2DB3AFACDFDB967C7DBD3B9A23C7E1
+:10C5A000096871DB3A7B24BE99DBEF0E36407126B9
+:10C5B0009ADD11C71C22FE8BDB0DEFE07F93197B08
+:10C5C00060B46FCEE804C4BFF7F64755BC1FC3F58F
+:10C5D00015ABE5EF56C2BEA434FC5DEE21B8565350
+:10C5E000BF2F61BC13E9598B07EDCEE25466494673
+:10C5F000E3CB1DCCC6F7C7EA476BF29AC79717097A
+:10C60000DC3D9BD2BDDC49EB3C1887F07CD371EF5D
+:10C610001DEDBD67F4F8A1FA23F95B343C994CDDBC
+:10C62000F47B1D06EA6D1ED40FEF6211B4DB75B307
+:10C63000398476B516877A3C7ACED10495DE3D589A
+:10C640008DFDCFBE65EA1ACC4B87E3D5E536BC3706
+:10C65000D5AFDD2F5D83785B66F167261AE87CB580
+:10C6600000F7C3CC172F2E23FB4A878BD3D0E0A92A
+:10C670009638FEA3D2FC0FE338D586BE1D3EFCA63D
+:10C68000F4F17DB62381BFBB84EFEB0CB3FE353CE8
+:10C6900054897E0E193D5F0EC0FC0E6D8CA57BF893
+:10C6A0000BE26F99836FB22C34F812F1003D0CEE5F
+:10C6B000ED04B76D6E6632C26D14705B1204DEBDA0
+:10C6C000B95F07F760BCCC7D92F67E3AE59F0F38E4
+:10C6D000E9BEBBD9F0F9BB33510F971A3C68776EAE
+:10C6E00003FB02DF77FB3F02DFDBF18C258EBED33D
+:10C6F000BB6F6E71EFCBBDC940EFBCF8AA5E203AAC
+:10C70000ED6AB07970DF3E97A9F4EEEA7C710FE62E
+:10C710000F95FFFD723FCCEFA5D1FE83388F3BE232
+:10C720000D19EF121CFE627A476BE295C5CF6AE7DE
+:10C73000F033847DB050E07126F352DCEE4DCC6FC7
+:10C74000C471DF3E6BF2A25DFAB68847BE8505E88C
+:10C75000FBAD2C48E96D2C44F5BF872FCA42FEADD6
+:10C76000E8D1E9CD005FDD630579B81EC3F0FE06B0
+:10C77000D219F8E50E17E7973F2621DE3B13AE8866
+:10C780007FEB248EBF0746FB7FC3D7ABEAF2204C7A
+:10C790008E4969E847195C3FD5099CFF1447DED7ED
+:10C7A000AD9FBEF3DA7D7FAF2DB902DFFBE23F37ED
+:10C7B00078EFA278718CCB77011DFA547ECF11C42B
+:10C7C000863D0074AAA994296E6FED67E27E363A21
+:10C7D00031A0DE2FC7CAF43E99762E395DF4373D7D
+:10C7E0008DDF57ACAD9CD9160B7899F2657F79082F
+:10C7F000D29A34FDFDC5A9AE2E7AD27C5AAEFEFB8C
+:10C800008DAC830E886B4BF471E6D323FC9F87704D
+:10C810006CE0AB8BA345BC64112B0ABF6FF01DD13C
+:10C82000F67CEDE7A673307EC918FF57488FE5DF29
+:10C83000FEC31CDAD729ECCD7130BF867F97C99E25
+:10C84000FCA80566528071D516E60583FF24D8152D
+:10C85000983FD5E2A6F434D801987EDA5248E567CD
+:10C860005B3C949F35C6671903FDCE6BFF4C417D41
+:10C87000B4568BC716706871856B45FCC40AFBF211
+:10C88000E318BFB08202DE192CF68E2908FE9D3D0A
+:10C89000DD473185EF32EE43566C94C8AFB3F08874
+:10C8A0007F0D9279F11BFDD3514C8CFFCD8944DC77
+:10C8B000A7D7A31D0BACBF22CE9B340658C0DBFB11
+:10C8C000E1D178A8FFC7960904DF272D5E82EF4FDC
+:10C8D0002D3594D68FF1A5533DF619BDF3F4ED67D0
+:10C8E0003E54F0F7B34DF64AE4BFBFCECB8241C011
+:10C8F000EB662397EF9B41BEE3FAAC2C9DB1FD1E86
+:10C9000086F2D75F80F3BC296EFEE478F83E7DC2E4
+:10C910005C05EBDDF225E8A0AC213EBC1C5F9F79F5
+:10C920004522FC9C79C549F8D0F0542FE875E660A3
+:10C93000F177F0DDB3578EC9147F7AFEA281E03B18
+:10C940007F3C8AE25323DB2F3F909384F6D89F806D
+:10C950007E78F0B1FC4031F9E3FFF4ECBFA8E1715F
+:10C96000BF7F8AEBBEF03ECAA9FFCBE514D89B2758
+:10C97000B7A21C4B4BA1F77B06E3D5585334EAB161
+:10C980000693585F206730FFA728BE0FAEF8796A7C
+:10C9900015AE171C0FE3BDCCE2F760407F1FFC1003
+:10C9A000FA3BB8D54DEFFD7CBAEFB16C1C7F6FF749
+:10C9B000C2F7B742FF6782FCF7609C61DD675F44A6
+:10C9C00079BADB467ECBB512C085FA744F0AE50B07
+:10C9D0002525AA999C19411E8722A90ABE7FB6EC7B
+:10C9E000B92D29C85F784F1DE3EA5FDA184D72EA66
+:10C9F00025A3E78366EC6F3BEFEFC987EEFDA80741
+:10CA0000D307EBCBEE45393786C7312EF8C9D22292
+:10CA10006C0FFA9A7EDFF3D3CF4B21F48394761E0A
+:10CA20005A8D714C63B67D68488174EC6EA915D33C
+:10CA3000E2F469C7D07F70D71895DA8F7B264BC692
+:10CA4000D8F4A294E0FBD7F3B8119D7E2FE9FCAC9B
+:10CA50000AB7999A9E2F92BA4F77E1BE38E37819B8
+:10CA6000BFDFC5DFAF3ED03BF39DDB18CE032C0804
+:10CA7000847BAE89E22E5830D085743EE32FF4D00B
+:10CA8000BB2ABEC016E4AF33FE44BA5F78D010882C
+:10CA9000C1DFE314F880FFBEA1E777BF1583F1146F
+:10CAA000B1FB8D0C7F2F76FDD88129141F92AED259
+:10CAB0007E3C7DC70D35889F86FD07BAA89F651609
+:10CAC0000FFA63971CF89CEEBDB0A93C0EF5CC7E26
+:10CAD0009E7FA0DA4BEF9D2FE9FA33CFF7F928EFCD
+:10CAE000930359747F623EB7771E13FA8CF58F66F5
+:10CAF000E1EF2169F47A008AB17C73562019DFBD19
+:10CB0000D2F420E8AF8770FDA1DB91DA3B66F27BBF
+:10CB1000F257A8BF4C421F69FD3D66E2EFF4A21830
+:10CB2000C1DF8BB3CDC4F5EE1E9037C82F9ADE85DA
+:10CB30007177E0BA3589FB32A9A064C7C27C521F65
+:10CB40003373F97D85E347DE67D5EC90D9F1AD7499
+:10CB50006FF5D354FFCF701CEDFE2A533CF4AEE0CA
+:10CB6000EF53BD4F8F49E0EF75E01C402FFE02F3FD
+:10CB70000D32D85139617694E5CAF4E2DF52BD072F
+:10CB8000709C2BAD1F2987270AF857D80D8487156D
+:10CB90008F9AC91F3651DC439D78FE7834CA9315AD
+:10CBA0007F2E23B9D2CAD8B0F879B985C779FF1BCF
+:10CBB000FA1120BDF68B7E99F623470CCB8E827E30
+:10CBC0002510C87F38D01A5B4E792F92FBBA2F0CF4
+:10CBD000C3EE17B514E8F52EC9E92FF5FE87EBBFB4
+:10CBE00074D0EFCD64B6B82B9AF7D0FB3EFAF96B50
+:10CBF000EF6CC1FCFA51BFAFF8CC40FCBBE2B332E2
+:10CC0000929BBD57385FABCB7B12E18C9C0FC0FF72
+:10CC100029D22712FE417E1FB832F8BF2F31FA7D8C
+:10CC200043A0AEC8BFDD2BDE31E85D5A42EF691C80
+:10CC3000C4F748506ECEE0F78E7AC5FDE4DE0407F7
+:10CC4000BDF7F19291E703B78AF6E27DC8DE5B5348
+:10CC5000F87B1DE6A65F9762FFAD3C3EAED718A4F9
+:10CC6000DF53FBFF00D94A3097008000000000002E
+:10CC70001F8B080000000000000BE57D7B7CD4C505
+:10CC8000D5F7FCF696DD64936C42C88590B0B91078
+:10CC90008206DCDCB806582041B468038802C6B8B6
+:10CCA0002101426E844BFBC4969AC500A2C51A1E90
+:10CCB00011D1A22E14282ADA50115183CF0A4269C9
+:10CCC000BDA5D5FAD86A692278E59210B40FF6E1CD
+:10CCD0006DDFF99E99C9EE6F49D4F67DFAC7F379F5
+:10CCE000E347C7F9CDFD9C33E79C3967CE6CFB8FDA
+:10CCF00006B9BC4EC68CD6B939A7F3197BCF67F0FD
+:10CD00009AA3196BD1FCB71A0B18F35EB0B0DD69AA
+:10CD10008C6D89F1272FE7F92DCBAEA2FAEF3136D2
+:10CD2000B32D07DFDD49B13C3DF837E3EDA5769E35
+:10CD3000CFE5799EBEA4B1F9543EDB9D14C3F30B3D
+:10CD4000C3A346B36B787E876FF7D6387CCFA67EB9
+:10CD500086185923D54B13FDFCD12CDAFD81F1BF88
+:10CD600024C61E3533AF2D96B1F1AE45C35D858C1B
+:10CD7000796E8C30B16814BA93343E9F47AA86B35B
+:10CD80007B359E6D7D88B178C6E65B19FDA9F150B3
+:10CD9000D13A86B179E2335BB078B7CDC3E733AF30
+:10CDA000DAD6A58DE6EBA8BE2BD2C9C79BE731FA30
+:10CDB000C3A278859B4ADC9DD9A2EEDFD331AE9B1E
+:10CDC000C66555837886A7267F25E3E3BEDC6365C9
+:10CDD000F772B8FC1D7F5302298718638319FBD4AF
+:10CDE00026C6AF6F9BFAC069D51FFFB7DA62DFA80E
+:10CDF00045A33CD5C7F8F8FB87780AD0FFF243D7A4
+:10CE00003D70DA1AA857B5B8248B1902E3868E1341
+:10CE10003A5E0BF0C6C71B063CF2262DBCC000FCD8
+:10CE2000B5D97CC01F33F5FC6129CFB7CCBFCA751B
+:10CE30002FCFCE9C63756B1C0FBD07C27C611ABEE1
+:10CE400087BBB1AE96C3913E03CFDFAE09F8B7689A
+:10CE50008CBE7BF79B7DBBF9B73A8BEF893DBC5D00
+:10CE6000DDCB235D7C6476D0C2FF83F21723447947
+:10CE7000943B6D7D01CA1308BF2F999DD154FE6B61
+:10CE800023A3F2707F560C877753A2678E8BCF7BDC
+:10CE90004818C7BF1DFD8AEF2725FD9DE4DD02BFB1
+:10CEA000DEC648EA97C9BCE787837CF7D27ADC49BB
+:10CEB0008B915F7535ADC78379F079B1068DD67BDF
+:10CEC000D2E1BB278B979F6C1F4CF38893F470B211
+:10CED000F42F6F8CE5F54E1E32BAD0E7074D46BFF2
+:10CEE000250AE5021FDA1C6BD636DEEED48B91AE36
+:10CEF000305E5E767FEDEBF85E7657FD2C4A6BD6A2
+:10CF0000DCC878FDCEBBDE4FF5E45C898FB23ADE3B
+:10CF10002A088F77BADCF5C0EF232E4F23D6BB3C0F
+:10CF2000A77309E37475DED2F1183332F6EE50CFF1
+:10CF30002A7CEF7EE1933DF8CEF194553A8A2FC3D7
+:10CF4000C4E904F4DB399AE87AB9A4DFF45CCF1DB4
+:10CF5000E88FC3B19C65301691D361C13CD89AC1AA
+:10CF6000DF8A4E3E6FDF7D50E3E3D486B737506AE9
+:10CF7000F48D463F67347F94964170F460FF9D7551
+:10CF8000F8A3800F8F81E7397E6AF7EAD7853F13D0
+:10CF90009F572DFE87B7AB6D33BA6DD83FCC67C1B5
+:10CFA000FC6B9925503F4DEC43D001EF6727ED57BF
+:10CFB000FB07E53FE478A8796264DEBD1C3FB5312C
+:10CFC000877E3291EAF1766ABF18AFCCABF55C3957
+:10CFD0001FB1BEB3721F9CE55FCCA09F7D6182FE36
+:10CFE00099A08FF34F2449FA11747BFE89113ECC2E
+:10CFF000275EEE9BF39AD7108E763F62AEDD7C5EA5
+:10D00000CCD53666F628CCBE6DCC9C48C6B64ABE9A
+:10D01000563BA86D0CF895E25FCCDA367A362F676E
+:10D02000D96DA3E78C0AF03F56DA9645DF7D6D593E
+:10D03000687FD0C0AA014F359F9AA79277103CAC69
+:10D0400062BFD63C7535C1478DD3023E027E0C7E51
+:10D050001175E5BA5F766962FF478E49005F1B086C
+:10D06000FFD9898372C04ACE2FB0DCEEE6FD8ED8A0
+:10D0700066D1F5A3EA8DF4E9BFFF0AFD737A1B16AA
+:10D0800082CF21C69E57C2F87CD9CF389CD895E371
+:10D09000BD29DB3DF9641FFE8C029F8C3915DD38FC
+:10D0A000094E024F7FB0283CAD4EE6FCBA1630491F
+:10D0B0000FC0EB60AE271972E53CF29037313CCFE0
+:10D0C000D306097F9557700FA5BFBBFEB024B99357
+:10D0D000B7FF6F9781E6150AD7B51C7E286F31B36D
+:10D0E000DB4B79FBCF9B4F649C3607D6F371B3DBE8
+:10D0F000CD454D5F7EC9B65C2BF6DDD2EDB9D64588
+:10D1000041706FD99B7FC2C9F17A76AF0923B116FE
+:10D1100093EF2713E2F0DDD8E665546E75F3FA67F6
+:10D12000ED47DE44BD25DB63F28CCE40FBA5DB4A38
+:10D13000DC5541F0BF7AAF1E1FA3DAF4F96B0EE99C
+:10D14000F3E65C46F4F08FB6CBF5EBF3F927F4F990
+:10D150004FDE597D33B6C1F3E3C4BEF9D417E9B34A
+:10D1600072B856BF3FE304E4E8A7079F8F02BE6A88
+:10D17000FF54753C99611D7A3AE578D44C7CBDDE4C
+:10D180003D1AD1CB325FE8FE957CE38A7DBD96F0F7
+:10D19000859D154C37A1F83DC3DA6E7673FAAA6BFC
+:10D1A0007A3B037A4CF52C4EC890DF6D9B2DCC7EDC
+:10D1B000E57803F10F66773B19A7BF8A71A26C422D
+:10D1C000D374768AF7C736FD7606F66BC58F35D2EF
+:10D1D000372A9E1DF12AE8A66BFF82EB29BD79262E
+:10D1E000C1A192B92DE0874BDB357F24CF3BC639F7
+:10D1F0000F75F2768B7D9A0BF35EB42E2CC0CFF8B0
+:10D20000BF559B42E6B125A89CCF7FE9A157BED26E
+:10D2100078FFD5DBF5ED967178417ED4ECFA7B583A
+:10D22000F077AE0811BC26B4EF3062DD8BE5FC95DB
+:10D23000FC63DEC90CEB9B209AB0D3F80F971B96CA
+:10D24000619EE2DCC2801C9CB045B4E78CAF02EB6F
+:10D25000AEB75B9C5877BD95F923F87C4E445ADCF9
+:10D260000EFEFDE2B648D21F968431AF358F52666E
+:10D27000CB433B5734DA7DFC9691F4A47ACE7BA85D
+:10D280009FC7355F0BFA316A22FF33915FC6FCB44A
+:10D290001ED08D3B789D3E7D9EB50E22BDA4CEE472
+:10D2A0007F0570A9619D046FC6F1E95670E470AB0B
+:10D2B000E3EB7C2F16FA97BEFD72D646F5971FFA60
+:10D2C0007B58F077AE67322BAFBF3D9CA7347F1FF2
+:10D2D000C1D168616E039FA7F1CE709F97F490D281
+:10D2E00070D0A959EACB5BEE716761DEEB357796BA
+:10D2F000037C6CB3CD053EB6708790435B62B8FE8D
+:10D300001A477A33B55F087D0A7ACA02C1EFB6C4FC
+:10D31000B4F9C1F7B73C9826F4A9BF19092E3DF717
+:10D32000D97C3B35E8D342EFD9B27904B507BF24A5
+:10D330007DEABE48D17EB680EB96C10E9F97E7FF8F
+:10D3400088292641CF766759A91DD7D3D202724AC0
+:10D35000E9D33F1BE6B90BF856EB55FA37ABFE762F
+:10D36000FAE66E293F7B36F379F2FE4F6BA5C70DC7
+:10D3700041FAF003B982FF8F99E6DE23EBB950AF93
+:10D38000CA30FBDE297CBE555B0DCE96B400DC991D
+:10D39000DB9D05389FDE6CCB039D8D99C6E83C7103
+:10D3A0003257F0F38802E6F6F174BBEC777BAE41BE
+:10D3B00097268673FAE3FD9C2EF19B81DFC882528B
+:10D3C0000BE42197E1C4CF43D7B13757C8CD2A4BDF
+:10D3D000E96F26F5339F3E3A28167ACBE915DA4EE7
+:10D3E000312F81E731FF6E73B5D0BAC5FC14DC393B
+:10D3F000DD1492BC977C2BA68F4E7C4FD8386A37B1
+:10D400002B7D1AF8D7747442F0DC72DF28C2E34235
+:10D410008967769F4DD209637F45798993CABFE9B1
+:10D42000BCA5D6C9E980CA39BEFDC077E8794BE111
+:10D430009B997C85A59103E37BD1B898311A077538
+:10D44000B28979C3385C20F3082EF7987C77F1F91C
+:10D450000C3509F8A798047D71EEEC0DCFA3FA6E98
+:10D460000BCF573CB094B979FD8A64E6D2447D165F
+:10D470008DFABC1B234F2133D0AE225AF45B91C0EE
+:10D480007C7749BD1FFC2A13693AF5EB36C48AF64E
+:10D490005179D4DE6B10EDDD269E0ECB10FBA56717
+:10D4A0007D18ED9F8ABB53B24007B3A6E9E9203F40
+:10D4B0004FD08D4A1FCF734A39E34AC4FE5EB46E23
+:10D4C00024C98D165B69FD73C0D7D311A40F566CA8
+:10D4D000B8ED8642CCEF9941D070D8E737EE1F0304
+:10D4E0007A5BB46EC1F77E8FF3C85E1B7D6FCFF39E
+:10D4F0009CCF85BEAD39CB9FE31F16CD3B6A49E477
+:10D50000ED3D6DB3CFBDC8D31BBDFBDF845E70E3C3
+:10D510004D46AA7F236BFBCB1FC117D689716EF0D6
+:10D520005E3025F2FE6E28D218CABB6C8ED4157CF4
+:10D53000FE15127F7F95FBA0C5C6E6FFD28E79A5AA
+:10D5400064A5F3EF374053ED470F1C9727F5C4A9A7
+:10D55000DA76E83DC3A68BFDA5EAA31FF43B19F0DC
+:10D56000E0F5CC122E2ACFE14AF5AB36867565443C
+:10D570002135FB47F07471C1345B1EAF372B9DCD55
+:10D58000C0B9A9E70E23DB49F3EDA9A07D1F99E5FA
+:10D59000C4BEF730E627BEE71B4974DF35B5A7EBFD
+:10D5A0006E9EEFDA31C2D5427C5D9CDF173B18C915
+:10D5B000F7AEA982AF29FE72D2D11949F42ACFF36E
+:10D5C0009592343E6A9ABE752CAF5F69B774411E5E
+:10D5D0002C7E706E9493CFB3720B3FCF7339C636E7
+:10D5E000E9CFF3FCBC9D9137F8CA7379E8F91B3495
+:10D5F000033AAADAA4111D0E6B715992888F690E35
+:10D60000ACAFCAEECF84FCAB72D95C283FDBEC7EBA
+:10D61000E034D70FCF37CFA4945DE670E7F3BC0AB0
+:10D62000C8E3FB7E6CBEC7053855B456D0793222AC
+:10D63000C743FC69B9A4BB591CCC1AF88DA933099E
+:10D64000FBB02B577E8F7564D9899E6D0C70E832C4
+:10D650003BB230AFAEF53603E4E6ACBB045DF37D20
+:10D660006635F1F6F7985838F6FBDFD09EAFB36C0D
+:10D67000ADA97407CF0FB53253642CE82A97E8FAA6
+:10D68000E7051E33E0F0E98FD838E805959B36D3DF
+:10D690007C145D305347F120E879BBD3F270BE565D
+:10D6A00074F4F38269D7E605D3C34D1AD1014F5FF5
+:10D6B000C9207A98338BE8619A3F73259F5789B1C7
+:10D6C0008EB961674864AE303EFF5ED643FA442FA0
+:10D6D000D72720CF143F517C83D381DB1A1FC0EFA3
+:10D6E0009E663E15CE93F7365B297DB2D9C14C1CA0
+:10D6F000BEFB9A1329FF4CB393D2B6E66CFAFECB6D
+:10D700006617E50F348FA3FCC16637E50F35CFA44C
+:10D71000F4C5E652FAAEF812870BF121C557143F53
+:10D7200052F4A4F852281D953BB137A83DF13DC5F0
+:10D73000EFB00E435E801F29FCA66BA5DEC434F05B
+:10D74000B1CE05E01725C6B34F3FCFE1DB5B6D7768
+:10D7500085390117C1F77AED5692F3A9167608E7D5
+:10D76000FF9615EEAEBB83E4EAADD51A3305D1EDD5
+:10D770006D8D36660AA2DBDB9B6274F9B2A6B78FA9
+:10D7800025F0FEFF9EE2F1022F27EFFCF8D1FFE427
+:10D79000DF1FBFF3F3E1C0379FC7EE8730EE9AF08B
+:10D7A000BE79C422BFCE4C726658B838270D0B170D
+:10D7B000E724FC013F8B98D8A78FDFF957DAE75DA4
+:10D7C0004D614E23F40FE08BC3F70389AF454D61E4
+:10D7D00004C78AF5A79E7E1EFB7D8D85F8DDA275A8
+:10D7E000727F6EE4700DD2DB3E4C62A49F696EC600
+:10D7F0009A38FC3EFC91C5CF653FFB50B3FA34DE4E
+:10D8000050E387A632FEDDB3F157EF41DFD69A4EE3
+:10D81000907EECB1DAFD46CCCF6B3E1BDC9FD6741C
+:10D820009CEAB1CEA1311F47D0566480634481DBAE
+:10D83000023E01DA06FE16651F61D8DFAC55730C97
+:10D84000E7EBAA92DFAB366AA47728F83F9167A48A
+:10D850007D753AD744789D863D3B981818C929456F
+:10D86000B79C6FB87DD81FADB9962541FC7891FC67
+:10D870005E996DA0547D3FCDB725FA9986CDC5FB45
+:10D88000BD373BDDB298F89DD3027EA0EA2FCACE09
+:10D89000DB905E807EA6C6B1A07DF95C9E49CECBB2
+:10D8A00021E49895CB31DEAE6E0079A0F4934FF170
+:10D8B000BFE369FE74FEAA79E6A9675E845DE2FDB6
+:10D8C00030C253CD35D2BE91E31B3397F41AB75D06
+:10D8D000E3EB6C90F82F7EEA4F519DBC7CF901611F
+:10D8E0003FE56917D28635D5642F6B70F17D827D57
+:10D8F00070C8FC6167105DBEFACCFB519D74BEF030
+:10D90000261B1291FA93194F1B0E9C9AC1D01FEB44
+:10D91000D9E0B05FD96EB97699CE996A1D2587BFD7
+:10D920008CA7F1B54BF154FFF0FAF8FEEC20CB993F
+:10D93000E9C3BEFD4B7606B7CEAEB69C6DBA60E4C9
+:10D94000F35DBE66E627A0F3D0FA9FE445C6817E6C
+:10D95000D8583696EC18266600BE575A051C7A7DB4
+:10D96000C3A3D9D7D85F966FE38DB8AAD56B72469B
+:10D97000BBF87CBB613FEFA77E4EBE90EBE7F83E65
+:10D9800062FC2CD5BDCF48E785EE7D9144FF0DFBB1
+:10D990001E383E91E71B76691896D5B30E8253C3A5
+:10D9A0000123B306CB33D877060D3CCFDAA7221B71
+:10D9B000414FCBDA34F76E3E9F5EAB337A70D07C4A
+:10D9C0006CF9829E6AC3DAC6105CE5FCFF2EF999F9
+:10D9D000AAB7ACFD010BF0C5EB9D27FDE517118C37
+:10D9E000EC66ACE74DCCF3CCF67C17EC7BCBDAF6EF
+:10D9F0003790FCDF17E118CED7F1B9B4F3AB7E0650
+:10DA0000E78BFD34385FE81D67A43DF7CC3346E271
+:10DA1000439827F6E1E7D07383E6992CE7999C2F8A
+:10DA2000F49B23D88F8581FACBDABAA23279FD4FE5
+:10DA30000EBD4DE97039CE327BC768C8CD4F0E445C
+:10DA4000CCF451FAD3192FF1F1CEB54D8DD382F626
+:10DA5000555EBE99FA3DB7DD3813F062BE4152CF34
+:10DA60006FA3F59CD997ACD1F916F0E67AFE99032D
+:10DA7000CF461968DF7A453B89478355D869C36229
+:10DA80009C52CFB4B642DF58C8B5BB68CEEFEA0FA0
+:10DA90005C20F91BFA5DD5A7FD9684F3770FD93585
+:10DAA000F89F01F45BEF10382F31E624601F945F7C
+:10DAB000E3BCE556F0B1D7CC020F439D0FE15C55B6
+:10DAC000FED620B25BAC343B1390FFE2757E10E4CF
+:10DAD000F32ECF97FB3BB1B31076CEAE3421D7EB0C
+:10DAE00036F2830A5FCF108E772F5F729DCFC83CCE
+:10DAF000F9013FD1FCFC745ADF23D506B785FC2C15
+:10DB0000FE2CD83D4F5A9897FC46BFB4097F40BAC7
+:10DB1000B0EB3F22FD4575B1FEAC41B07F493CD62C
+:10DB2000CDE1E541F8ACDBE9CF82FE72D622EC7C98
+:10DB3000287720CD13F55A24DDA01FF4DB95E638B5
+:10DB40004F7AE673910CFABEE1F9486157F8B96D66
+:10DB5000675890DCAC9674C575262FD6EFDD2DE6A0
+:10DB60008779417F5E6669CD827EA9C65D16D54AFA
+:10DB7000E39D95E32D0B6F15FE098BB047A23E8DFB
+:10DB80006F66E447E979228CF4D4CF933A0E62FCB5
+:10DB9000CF9F18C920C7BBD27C4B0E5139D7DF3875
+:10DBA0003E6A9E0CF363BE9F3D11E963BCFE67664F
+:10DBB000A10F7D16194FFAD089C8ADE5E497D915A4
+:10DBC000A6C1AEF299C62C8928DF2DFC1835CD4DA3
+:10DBD000E47FA8E1DB9DE5513A93C5A27C24D95BA3
+:10DBE0003EFB35DFA71A7DDF88EF1ED65AFE03EC19
+:10DBF000BBBD116477FBFCC9FF1ED99FDFA26697EE
+:10DC0000DEBEA4E84095DF23F9D23D128EF7E53B56
+:10DC100008FFF5116D5BD3699D62BF723CD0B98B73
+:10DC2000EF8F78D8BB4FB6BD10AFD901677FD64F05
+:10DC300001F7BDE27CF3F93E33F95D6A9E8F749380
+:10DC40001DE7EEB106C88B1AA3D0836B0C1C7C3C7D
+:10DC5000D5EEDC9B053DBBE5095B1EE0C1E14DE770
+:10DC6000C89EDD46398E18F7B33D29C2AEEF97F94D
+:10DC700083A3C8AE3F2B96DD3E87F49CEDA301D76E
+:10DC80008BBB220CA00B3E8E5BE3F0A9F9C10F0504
+:10DC90003CA397905ECEF71FF1CB3AC92FEBEF9ED6
+:10DCA000183D11FBE92D23835E70D1E44A003F0C3F
+:10DCB00085D70792AFD41E7CD402BF5D1DDF371E0F
+:10DCC000BE6F6AA57FACF6498DF4BADA0D131F2238
+:10DCD0003EF8A6990DE7F338DBF64054303E8E4B04
+:10DCE0007E1668EFA2FAB5BCBE68FF5A14CD678FE6
+:10DCF000D985F984E2F15BB77FD2F8ADDAF7D14785
+:10DD00001B97EBA3AF5CF745D6F1FDF7C14FF6D9F2
+:10DD1000C87EC5F19E0ABDE38CB96D09D67DE66962
+:10DD20001BF199333162BF7FC2F9A17704E6F19DFF
+:10DD3000FBC9BEF1BBB90CF260A94FDFAF1AF735D2
+:10DD4000C97FEB07B9A26127ABE778407F1C2FDFC3
+:10DD5000A5F66F99A97DE83A9E44BBC2A0FDF9746F
+:10DD600004D1CB9921021F679E194172A52B46D081
+:10DD7000399F6F2ACE2B676244CAA08C703AA89153
+:10DD8000E7D13353DBE8FC7D46DB4F699759B4ABF1
+:10DD900069927E634E7789A01BD024FC61D64D1D0D
+:10DDA000D02760AF1E9347A93F2CF64ABB33E81338
+:10DDB0007228A340C82F86F1E2A5FF83F494360BA6
+:10DDC000F8B247EA7175FBAEF4C301BF75FB34F2DC
+:10DDD0002319543F7CD671CA5ECEE9B1D6ABB96D7A
+:10DDE00098CFBA15CBC88FD4B8F956D0BB5A47AD27
+:10DDF00089CDC479A84B33D27CBA6C7CDF000EC1CC
+:10DE0000E305E95D91817198239EF44C52AE630A5B
+:10DE100084BC42BE95F757B74EDB44E3A4A973A573
+:10DE2000589F8213078B05F6327EDE17E503AC5F41
+:10DE3000CD3374FD6A3EC30B849DA22BCD797F1137
+:10DE4000F0FD86D18573FAC5CBF9D1B15FA397E117
+:10DE5000E4D66737E6F3CF034DF1F97F29F95B2D5F
+:10DE6000ECD27C9E59DBF5FE90EC5DFAFC55FBF4A0
+:10DE7000F99C03FAFCE8767DDEF5AA3E3F448EABC2
+:10DE8000E08473AF738438F722C5B9D71926CEBDA5
+:10DE9000C8E3DC8B14E75E7CC7B917799C7B91C71C
+:10DEA000B917799C7B91E2DC8BEF9505827FD7498E
+:10DEB000BB23F000BF0C7BC1A6FCECB45FBA17C457
+:10DEC00013FF547ED2EE653994EFB3EBCCB6925D7E
+:10DED000876C375C2F993BD473434121FCA71D1BF2
+:10DEE0009280375327D97397BF28ECB97579363BA1
+:10DEF000EC0C9DEB3FD900F5296BA8670EEA779BE8
+:10DF00007BF6101D98FCC4373AD73ADF9A22F047C7
+:10DF1000F60E668FA5F34905E45DECC0780CF5AB11
+:10DF2000B04D7A3F4AA85F25D49F124A07CA8FF2A4
+:10DF3000B8B92709FCFED413D64D98FF2969276389
+:10DF4000F3ADA47F29BDBAC4682738ADBC4FDB0947
+:10DF500039B5AA2096DAF79EE0FA763FF256A595F3
+:10DF600097F2855EADF29B3403F9693C6E9243AB48
+:10DF7000E49C52B59EAEBB4123910692E317ED0699
+:10DF80003A175C7CC7487AC4886D06DD7A46FAC2C7
+:10DF900075F475F5DED8107FE0105DFD6B0EA5877A
+:10DFA000F803AFD2FBA96E5AFB0ACED77337E5EB65
+:10DFB000EA55954E0C81A39CB7D44B5BD66C4B05B0
+:10DFC000FF5915D94BF35FF59C8DEE5D5471F9E265
+:10DFD000E6EBAE4686F3C76AABFB46C0AFBACD1CD4
+:10DFE00003BB56A5943FAC492F8FAB4DCCEB880DAE
+:10DFF000D05DB583B96378FB73B9AD7B0C1C6FE75B
+:10E000000CDBB71639E15FDA91EAE074B55A6B8B35
+:10E010001FCFFB3B15E3D951C0F773AAD9FF933249
+:10E02000F0CBFD196C2DAF776AD3B351A4774B3A7F
+:10E030004B353BC281EF1DAD463A17C03E057B9084
+:10E04000A2871DAD83C233ED817506F07F99D6C7D7
+:10E05000F142F7467AED4786AE821ED726D65B3D63
+:10E0600055F3929E2CD7B352CA15B64EF4B35AE666
+:10E070004FCBF3825ADFD991AF8C76C2AFD97C28CF
+:10E08000D5083E6ED8B72709FA4582A71DFBA77AA7
+:10E09000C7F0FF2CE2E3D6FCDEC8E047FE68CBF415
+:10E0A000A8F1D03F9F36BB66F1FCDDAD3FB3E05C2D
+:10E0B0005063F25970EEAC7E628705FEFF6BF7EE9F
+:10E0C000A0EF4BF656D0797B296BA473E4A76621A9
+:10E0D000A7153CAAA769DB1D7CDE998582BF568700
+:10E0E0008BFB2025C6A2637158EF5E2D17EBBDA9EF
+:10E0F00074BFA5827F7F57F2E1D0FDD1FBFADC929D
+:10E10000C1B02BB5093FE840FB619E7F24ED87B984
+:10E1100097D228BDE9D2D574AEFA3D2B1D457C229D
+:10E1200027E43CFBBA51D8CDDAC53EA8B6F8E3E601
+:10E13000629FBC6CA67D526F82ED1BE764C626F021
+:10E14000B4B4C8A8A3D7E5C5113A7A9ECF62757E4C
+:10E15000E59BD9105DFEA65919BAFAB7DC747508AB
+:10E16000FDE705CA898F4CD0DD5FA95FE3756A645E
+:10E17000479BA6FFCED3354467D7EBDAD7B33981B7
+:10E180007A3807EFFA2DC199B10E0BCE5BD5067127
+:10E190005F67BEA74B7EEFA4EF7C21BA7D382CC30E
+:10E1A000F59F422E9AC93EAFECD3F3F1FF19FDC99A
+:10E1B000458E68396EB451D8173C7ABDA383CE9F83
+:10E1C0004CE0A15EDA7BEAB385BDA7DEDB6169B412
+:10E1D00013FC4DC91C240DAD1AD9F3787D6B72ACBC
+:10E1E000C8AFC1F703E6809D8589FE2EA1FC84B1EE
+:10E1F00002FB25B4BC81AF1B7A4603EC3564679AF9
+:10E20000F909D999D438B27F45A74BB7E9ED470D45
+:10E21000B0EB04E17359A193E8B566EFFEE3433830
+:10E220007CE696C6E4621FD5B5CD3657E45C496FEF
+:10E230008ACF5FAC3690DFBBF7F5A3446FBDD52620
+:10E24000A2EB6F824B835BD83543E970095F9795EA
+:10E250008FBFE480E6F269A21EE03304F419029F46
+:10E26000E47EE0A6E0D507BF90F2A5F89F02DC2788
+:10E27000D07CFEB4FEE012024F354E08BCD8383DCB
+:10E280003C96789C6F81FF2C396164BE6FB1FEA50E
+:10E290005827E6C1D78979CCB924EC26CA9F70F3F8
+:10E2A0002513E5FBE8A694C32B0FFB4EBF4FFBE8FD
+:10E2B000A854EC9B7997E2A9DDBF8A9EBE898ED4D3
+:10E2C000FC15DF0EECA3BB486E2C2F8C8CFB98B397
+:10E2D0000AFEFF85C417247F1D582FF50A3EEAD198
+:10E2E000CB9961778EA37B47BDF674D22BFAE4906D
+:10E2F000435FBE32323D01E51E69B753FCD823EBC4
+:10E30000A9712A78B97310E87A683CECB11BD6651C
+:10E31000A47606E92B9EF5E678D80B53D70EA2B467
+:10E32000C2E688871CA9586B2C857CFCF09E84F87B
+:10E3300071B0CFAF37C7CDE25D7F7847412A1B85EB
+:10E340007C09A5A73687CD0FB673AB745BA1D0430C
+:10E35000EBEF7C8FE4DA39C3EB51F3B1EFD63F1723
+:10E3600085AB37B5EBDF1EE3E02AC9DD319E870AB6
+:10E37000C98FBA638F037073EC180D3BF5CF6143FF
+:10E380001B1CD01F6AD69724C02E56F7B7A38F4107
+:10E39000EE7BD69AE3A17F7EF60E978B1AC935D213
+:10E3A0001B3EB5313A2F7DBA3BC207FFFDA71A735A
+:10E3B000C3BFB3CCF8CA68874ECEB6DF8C79EC4DBC
+:10E3C000F0FCBCB010E3FBF624627C9797EE677A12
+:10E3D000D60E8FEECF8EA2D2E5DB845EB747D97121
+:10E3E000A5BD17FA3CF2D0E7D908A1CF230F7D1EB7
+:10E3F00029F4797C3F26EDF8C35A7A72711EF54EE6
+:10E4000063D98D2477EDD9D0D75769E12ED2333532
+:10E410005702EC63EC9D18216F43F0ABD2493D5C91
+:10E42000E70AA2FB2997AC2CF89ED95416A3CB4F30
+:10E43000B726E9EA9738D274E5D7268ED4955FE7F8
+:10E44000CCD5E5BF933D5E57FF06D7545DFEBBE3D9
+:10E45000AED3D59FED9EADCBCF9DB940577F5E69C2
+:10E4600085AEFC96F9CB74E50B3C2B74F95BABEFF6
+:10E47000D0D5BFAD71ADAEDCCD1C26C8BD769CB38A
+:10E4800038DC5FC6398BA7ABDE186E0FC66BD17454
+:10E4900043637F76FAF3521F9A38D6FD19E823C5F5
+:10E4A00020E890A76EA81097A55C49667E4D9C73E6
+:10E4B0003B924037A1F542CB8B228E5C74721C2EAE
+:10E4C00039187BAB89F391A2B147F23378FE9931C9
+:10E4D0000B447EE29167D379FEE0C1ADB79A38FF75
+:10E4E00028BAE6C845948F1E5B2EF27319A91C4703
+:10E4F000C6FC6DA197AFA3684AFA2697B093F47B48
+:10E500004F53A58003EE37020E48FD9C3E911EE15D
+:10E51000F489F4554E9F5566C68E73FA447A829FED
+:10E5200037F1FD37FCBC89F4757EDE44FA263F6F77
+:10E5300022EDE0E74DA4BF6B9E4FE93BCD1E6AF78D
+:10E540006E7335A5EF3537D2F73F363751FA41B301
+:10E5500097BE278E5176053FD95F949FA901FE3D56
+:10E56000D8E70E99CF06FB61959F50F9055B1A59C4
+:10E570006704F669A729E6636BC0DF37309F35B1C2
+:10E580008F83F4B0CD89EE8C3134FE5007F97BE4F3
+:10E59000F769DADC14B8FE6E1DED193986E37B5E8F
+:10E5A0005EE5FA68CE3FA65C6E34835E7E2FEFA9EF
+:10E5B00086F67F59D249DC58F768B49B6C15F7F0A2
+:10E5C000265BC53DBBC9A6CE16F0A3962F9913F7BF
+:10E5D000685E89B4107F6AB9C7E4839D52FB82519B
+:10E5E0007E521CA37CCB971D742F6FB2C39548F24B
+:10E5F00046E6FBFCE7F80BBA2FA3FCD9EA9E4CF1E8
+:10E60000179DD3A1074CB25B9C6121FE77F8AD5FEB
+:10E61000897C57CD87613CE527DFF525F31B46074D
+:10E62000FCE193AD1D69B0134C5A6D7505DFFF51C8
+:10E630007E6FED8B0E23E489BAE7A3C651F38D34C8
+:10E64000F1FEF202F778263BDA7271AFA1A5DE4E39
+:10E65000FD25F0EF963CAAE73652BBB65CD8812781
+:10E66000D5D95DB06F2B7F7B825C37AF47EB2CFE3B
+:10E67000C243F70D26C9FB06E8C72ACABDE86752A0
+:10E680009C3FC984F5375A5CB0873EAAF1F6790100
+:10E69000FF3FEA4704ED5FCC13FD66FE85CF177A96
+:10E6A000BBDB4DF09DABCE6F4E9997F29959A79178
+:10E6B000FDCA28F3BF1DED590EBC978639FE1441E3
+:10E6C000FB3C2305768ED9526FFF1A7A59FD3F43E2
+:10E6D0002F6E81EFA18CEC69A174A3F0A2F03C1025
+:10E6E0001D29BC07DDD7223CF7DDBF92FD84D2D7C0
+:10E6F0004074A5E869B255E01D78C53D1A4547DA72
+:10E70000176D3B681D755692738A8E42E9E04A3A4E
+:10E710001274D9F23D2BF577251D05F00F78FCF327
+:10E7200074D46184DCFD47E9E7F61E36239A17DDD1
+:10E730007B8DE732E446C525E771E42BD9D4192057
+:10E740002955FE00CA075F591E4A5FAAFE8B03F4D3
+:10E75000E7F9A2C71C1D449793A40CFCC300F55F06
+:10E7600093F7E25FB3A9FB1E6E7B2EA783E9920F9E
+:10E77000AF2A11F43533CD48FE8CE9394B49BF67D8
+:10E7800076A11F3BF93F646F93FEF5EB65BB1997CC
+:10E790004BD7619C19717AFDFB7AA977CF0CF1B741
+:10E7A0005F9F732DE9E1D787E8D9EF8D917A741ACD
+:10E7B0004B13E7EB4DA4FF16CBFD982CF19DE134F4
+:10E7C000B2220EF712E6314108BC7ADEE2467FD76C
+:10E7D000322FE5AF633E4ABFC3FCA407DCC0050689
+:10E7E000F2DF658CEE8F1E8DB8B16C39EF6F7AFE5B
+:10E7F000F44C7CAFB3F6A45A0CB81DE8F90CF2A1A6
+:10E80000C1E8F933F4CC73299E11381F1F29769281
+:10E810001E76C49A417A21F69339C85EF96B2E4769
+:10E8200033B99C3BCAE52CD2635CCE667279F72B78
+:10E830002E6791BF3E7B2D43BB194EFDFD1ED5FEBD
+:10E840003B8EE9CC34686039F69DD12F0C851DEBE9
+:10E85000B59811C5C0DB6B31638BB1DED762120C8A
+:10E86000220DB3503AEAF9CCFEF45645AF81F16679
+:10E87000D078A1F055F00C85A382EF3F01CF416322
+:10E880000BAF84E765E8F7B09F5ADF8E4A4C879F4D
+:10E8900051C6D345083E58FFFCA804ACA3CE2AE0DD
+:10E8A00032A96922A5939BC633533EF999BC80EFE8
+:10E8B0006758020CCE217636669A46F9EF49DACAD5
+:10E8C0004EF00CC73CCEE6F9B3B846C63ED9DE12D0
+:10E8D00085FB99E79E31BA70AEA9333A37B9602704
+:10E8E0007FCD28E2822E1F4D857F93EDEAFFBE7417
+:10E8F0009D55C1CF4B70FDD9356EDA6F0CDED9F85E
+:10E90000805E33344CDC3326F742DEC07ACE98701A
+:10E91000C167868609FEA8F0C5DB09B9CBFB19C320
+:10E92000F95AF2FDE174AE2918E62EC27AF879811F
+:10E93000E28A7AB323C85EF11B199738D97F35C5AF
+:10E94000E5CDC4B99D7F378647EDC4BEFF8D8C4BA6
+:10E95000FCC520CFB5687F6D5A5E22E0318509BFC6
+:10E96000CA7556B3CBCFE774DD58B90F47B3D13270
+:10E97000AE4777FE507692DE3823C9A1C92CEB2131
+:10E98000D8098A4F98C94ED077DF2D51F8457B4F73
+:10E990005C3482AF94446A6C505A203E272CD1C01C
+:10E9A0009C417ABBCD19CE9C41FB23223B56978FCD
+:10E9B000740DD1D58F1E97AE2B8F715FA52B1F3491
+:10E9C000334F971F5C3A41573F61FE345D3EC97338
+:10E9D000BDAE7E72F51C5D5EF1BD64F189A5342E7D
+:10E9E000D4B51FD6B448573FCD5BA32B5778605E94
+:10E9F0007747763CF8A2F8CBD8B85257EFA7512208
+:10EA0000DE64A67DC92CECF7E1AD3FD0CFCBF8BAE0
+:10EA100046F1A34EC16FBDFC1FD05149A29EFF4ECF
+:10EA200077E8ED1AC98D265D7EC33F8A67CF553AD8
+:10EA30003C87C283E3DDE5477D2EBFBD3C5FF2EB43
+:10EA40004A13F40BF82F82E70FFF45F07AE1BF0875
+:10EA5000CEC37F115C1FFE8BE072F82F82CBF34F89
+:10EA6000E8F15CD8A1C7F3D8F7F47856F437103E34
+:10EA7000C677EAE920141F133F0DA10B8987F9FC23
+:10EA80009FFEF04047114EFFD31B19D9E7BE092F57
+:10EA90002F84E065D2484F3BF6EBFC4117532DC065
+:10EAA000538F6704CE939F493B49E83D4E2F57074C
+:10EAB000280EE107468ABF396968D5C097FD299EAF
+:10EAC000636379FDDB731A897E1259E9FE257C3E6A
+:10EAD000E5FF11467E9CF261225E97E574529C83AD
+:10EAE000E277E5C9E21ED11B63E5F9CD25EE13758A
+:10EAF0008C15FA6CA4CB41F78E2B72441C073F7621
+:10EB0000A5968F02FDBC6E1B017AD822FC269D883B
+:10EB1000178E0BC40B43DF847E9722F5AB963F58CC
+:10EB2000AD58C7886D4C272747FAACBA7BAF57EF73
+:10EB300075E8F2A3DA1275F5AF39E4D495E7FAB3C4
+:10EB400075E5F9275CBA7C61C7385DFDB1EFB97531
+:10EB5000F9F19D3375F5277E5AAACB27B39E87011D
+:10EB6000DF619A38EF5B395FA27B604E110F547EF4
+:10EB7000778C8803957600A54FABFBD01E4977A113
+:10EB80007AFA308BD0535B9298388759E5798BE9C4
+:10EB9000F5758FBCCFACF454E6D5DF6756F798FB1C
+:10EBA000F47AA9B72BFD38E81EB33BF81E73B98C75
+:10EBB000DF0E957F71E3847D2F74FEC32C62BD2D23
+:10EBC0007758286E44CD2B743ECBF304DDEEB6F6B9
+:10EBD0001FBF933E4EA3FE8B724B878CE3F51E3313
+:10EBE000BB7C6447B9623C57A717E7CA1F595C77DB
+:10EBF00039BF79BCF26BC47ACA0C86DB67E7D07D7B
+:10EC0000B1F9BF0C1A3F6F9CA0EFF8095ABFEB2B6C
+:10EC10008F16F7B958B4C509FA1D783C01CF440BDB
+:10EC20005B477146F2DEFF6D9BDAEE1BC18BCA2C8F
+:10EC3000AD66325E309F19F4306B1AD7A772611738
+:10EC40007CF1113BD7371E6B32919D67FCB8616533
+:10EC50005C13EB8BE318C6CF1BA00FE82C38A73C46
+:10EC600039DE48E32C1C27D65762BCDC77FF9EFCBC
+:10EC7000178C49FECDE83E4C3FF44674A8D6F1AF60
+:10EC8000BA8FAFE836144EEA7CC9A4DCC994F352BB
+:10EC9000F053FB41C14FC5433857984B77DA29AE43
+:10ECA0006226EE9129FCBD3C5EF0A34D8047A1A8F1
+:10ECB000077E3450BD12634E34ECE1BDCC19EDF843
+:10ECC0001A7BEFBF304E81E03F507CD540FCE10A1B
+:10ECD000BE3040BCD540F4497FFF40DC55107F106A
+:10ECE000F77A243E7C9906F2A3DF1DA9DFC72F8C9B
+:10ECF00013F0F5C87DCCE5AB3D57CF2718ECF72DC9
+:10ED0000EB8D924F08B90A7D03DF17AF3793BEC171
+:10ED100058E956C4117DB4C54CF75B27BB9D335CE5
+:10ED2000C23F4F7A07F9BDF8D42ABC7A79CAE5FB0D
+:10ED30004EE8C153986B03FC19951BF5E54BED3379
+:10ED40003E833C5F1C722E5D2ACFAB4B43CEA54F5A
+:10ED50008D93F2D8C55CA427493F7FB5ACD3474714
+:10ED6000BE8C686977A1FDC953BA17A6E0E284BFDB
+:10ED7000263F90E7F00BCF869C5E67EAF7BE5E1FEA
+:10ED8000FC06B88F7016F7119CD8EFBD146FD57BB9
+:10ED9000C026FC94CA1F24EB9FF55EA472D4476F73
+:10EDA000E7723B46430FE9F31F85F8A17AED86A889
+:10EDB00071E86F9F99FA53F72D6AFEEA1BED08F28E
+:10EDC000277B3A8DBAFB2D57CC7FED7374FFE2EEB3
+:10EDD00018CF3BE0E3674C2E2BF0778FFD483CE2E9
+:10EDE000E46749BB4DE87CFBF4CE224DF861BD22BF
+:10EDF0006EB677A646F700381F64D837EADEC06CD7
+:10EE0000E68F43AAFC319E8DE309CECA1F53E11F52
+:10EE10004FF39CD7B2D41CCEAB743EBCA624DC19F5
+:10EE2000F0D374A6887B3F03F96BE65ECAA5FE6E3D
+:10EE3000BA3491FAB9382E4DE85DEBEE5B013ABA7F
+:10EE40006A2F33639D9D21F7DE555A29F98D77BCD2
+:10EE5000E2D3F23ED15A8DE87CA5C6D4FD22E2D39E
+:10EE60002A7FB155E64B447ED57A91EF348B776695
+:10EE7000F6487B03D68914EBC1B9789FB447601D6F
+:10EE800048B10E7C075F421E7C0979F025E4C197EA
+:10EE900090822FE1FB22569A9A6B147EA5E2A07D08
+:10EEA00003BF527190DE03BF52701E7EA5E0FAF0E0
+:10EEB0002B0597C3AF145C0EBF52701E7EA5E0FAFF
+:10EEC000F02B05E7D9B8EB0279F031F76C5D7E2EB7
+:10EED000D7BF8B83F62DFC4AC1FDC3AFA4EBCFB3E4
+:10EEE00042D7FE56D6A46B0FBF5270FDDB9B349DFC
+:10EEF000DFE976F91E40E5B641441F2F8D2E758D52
+:10EF0000E7FBF5CF117FFB9E19E70063FB32D0EDE5
+:10EF1000CAFA7097C073EB4C8177031378EE5940AF
+:10EF2000785E6311F91271FFB83FFF4DB159F86F68
+:10EF300090C27F8314FE1BA4F0DF140F17FE1BA4E6
+:10EF4000F0DFE03BFC3748E1BF410AFF0D52F86FAC
+:10EF500090C27F8314FE1BB483FF0629FC37F80E92
+:10EF6000FF0D52F86FF0FD24FC4841EF66404FCF93
+:10EF7000D49DEB381DEACE750E5D1E7A7A707DE861
+:10EF8000E9C1E5D0D383CBA1A707E7A1A707D7871E
+:10EF90009E1E9C5F3DCE49FC12FA7A703BE8EBC1A5
+:10EFA000F951ADDE63B01DDDB0FDFCAB483B23B5D0
+:10EFB000C734CE0A56BC70A00C7EB64E9B961AC3C0
+:10EFC00039A5597BB1AC98E73DF21EDF68D66300E6
+:10EFD000BEC9CFCEF1E6F133BA773CEAAB242A576B
+:10EFE0007E5DFAE378CF3DC048EF3F26E33D557B99
+:10EFF00017731891AAFA817CFFF542C757F5885F0D
+:10F0000006CD831F0C7371CF24778D3D0FF7E5F785
+:10F01000183471DFF42E71DF3794AE764BBEB4C76F
+:10F02000B0FF4838EE0F55682EC4316499D8097383
+:10F030001EE0D49807FDE0BEF131725D8D1370FFC4
+:10F0400048CD5BD901399FA0F8B5A21E66A9E2E3BD
+:10F050004CFA82591683BF5B845E8076382F5EED52
+:10F06000D5DC3B83E8FBA1F142BE79BC2B2654F1F1
+:10F07000EF57EF6B9C80B8B859E1A2DDCF1F8F220C
+:10F0800038DEB84EDB89F8C3A27DCC8D78579F9CC3
+:10F09000F7D5FB1C962A1AD741F174AADF8AEDA98D
+:10F0A00014FF57C13A8B115FC10A3406FFA8821BB7
+:10F0B0005FDFAB585F16DF2A66D23F455C4EB88CE7
+:10F0C000CB51F1386131A555905B2A2E6752414CE6
+:10F0D00009EEC5B176E64218F00D0515EB07F3FE13
+:10F0E0003D3EB70BF78A267DD1788CF2BB4A294F7B
+:10F0F000643086C621B936C2ABD1FB1A377A77188D
+:10F10000E29C88D75D6B8E47FD7DCC0575878B1A99
+:10F110008A3B55F3CB611D069B06BCB3A38382E8F3
+:10F120008873809B80F75C9799DEDF986D7298C139
+:10F130003742E5F895F71643F48490FB252D6BDEF6
+:10F140004B35A6E37E89C1E507DF7A2E82F405A55B
+:10F15000EF54C8FB6617D71D1B7C0B2FAFD82FF4BD
+:10F1600003CF368DF89FBA6F529FE14B35405F1841
+:10F17000B26374AC51C87FF0C533DE676FC616AD9D
+:10F18000587F8CE2222AD617468BB828E187A892AE
+:10F1900070AA92F78A588E231E7AE6879CEFB847AA
+:10F1A000D0BDC4688A2B6C15FA9CB2B7287D50BDBF
+:10F1B0001F53F146FE71E0BDE251F92ECBC60A8A1B
+:10F1C000BF0ABDE7532BF5BD65EBCC747F6859884A
+:10F1D0003E582BEF0BD586E883E7C687E883F2FC21
+:10F1E000A2EEF356BC71741EE92B8D66F2CB95AD81
+:10F1F00015FA0BDBCF7C8867285B3BDD807743CA41
+:10F200009E73BBB47EE8E42DA9C7CCEAB4115CE7D9
+:10F210005C4AA6F4E64B4994DE7249DCA344EC0B4D
+:10F22000E8A0F305467AF4DB526F99877B9588470F
+:10F23000F486C9FB938CF4A65CE62801FFB8CAAD3E
+:10F240001D85DA37CBEC598F7B9BB376308A3FBA7A
+:10F2500001FA0DE2BFA0EFC0EE5E90564271183386
+:10F26000358A67B9A16085A46F4EEF0CF4EE95F472
+:10F270005B4AF93EB920E9DCE3ED3201EE3778353F
+:10F280000BDEE1F3C873ACA2E3507A2F8F90F62720
+:10F29000BBB02FF5D99F30593C6AE38DBE0DF75BAB
+:10F2A000CB61B31BC204E239CC237344F98817A3A2
+:10F2B0006F5B8743CDFFA35DA2CC6010F14E5CDF96
+:10F2C000025FBD6D75AE6551107FF962E2B419132E
+:10F2D0000B03785F1412A7B7F29EE1095F172F5A4C
+:10F2E000C9E18C7D521EDDF93D4EA1ECDA09CC5D01
+:10F2F000CCCFAC0B18538FF7F8712F70A1CCAF7E29
+:10F3000071DC9F36DA093E949F3E21F5362FF15588
+:10F31000C1B76E05DF32825F79A64E207ED53903F4
+:10F32000F888C8E991EF1048B9146287583DC1299F
+:10F33000D61B628FA8CC11FC9C999CA9B7525CB0DB
+:10F3400093EC796AFE1F9AF5719A7D7E9109529E1F
+:10F3500034FF6BE21BFE2BC3731BD6B7D520E2E64E
+:10F3600087185B99B40BD1FE57FC83C9772402F848
+:10F37000E77A1AF9D1354730FE3D1B3511A73E809B
+:10F38000FD8665F73CBC1BF6BB660B439CEBE35963
+:10F39000828E1EFF8185F4F0324BC731BC93A5E00D
+:10F3A000F87ED3BF9BC92ECFFCC3F1FED7C2469BCC
+:10F3B0000BFCF98B89A5AB30EF881C17E16306DFE6
+:10F3C00066E8FF644AE9F7095F9B5E790C71FBCB45
+:10F3D000DBD3288EB4E250EE06BC27F2C544CF0F33
+:10F3E00027C08F6B775820C71BD6C5905C2B4F90DA
+:10F3F000719DAC87FC540AFE0F4C10F6ABEB8A04EF
+:10F400001D77CBF30818E66C5D3D798F3B649F2830
+:10F41000BB60A87D21F41D8781F68FB223C06E608A
+:10F4200009B22B2ABB8439FBC30590A365167DFC6A
+:10F43000A14A5F557637791E5CDC27C77266244087
+:10F440006FDEAC3920C7AAECCE5BC6F37CD509339E
+:10F450006E60B259B14EF17EC73DE2FD8E457CBF74
+:10F4600082DF94C9FB5855DBC6D37EABF2F1347F03
+:10F47000E07D79EBE6A3292F807EFC6E8ACBAF720C
+:10F48000B82DB141FBBEB255D3C5F5ABFC8109C265
+:10F490000E57C6D574C0EFB6D56916BCA153C6D5F4
+:10F4A0000BDCEF7B7582531757CDEBD1BD8659E945
+:10F4B000ECB8783F89CF3B4D8C9717D4FFA256FD0F
+:10F4C000FB04BC3EE9452F4F8824FC5538F8BAD3DD
+:10F4D000903A689E1C0E04A79EFB787F4E1A87F018
+:10F4E00051E9F79971EE2EC37D0A9E5FE8F09931DC
+:10F4F000CEA275E2BD10CF26318E67638C6514F401
+:10F500002693C39202F8E1B01C47F3233E58C5E1AD
+:10F5100082782B1577190A9F0A39DFAAD618BD3EC3
+:10F52000D6BAD90C7C2C18E0BD821E49B78BD64DBB
+:10F53000A578F32A939BE2193C12BE1FADB0DD0BF8
+:10F54000BFC0822D0F99D370CE9E20ECCF3D72DFCD
+:10F55000CD4AF70FA7778156D85C98E702472BADC5
+:10F56000AF0FBE0F727868787FA694E0CBE9C28BAC
+:10F57000FB79555BF4F80CCC47C0B76A4B05EDB787
+:10F5800025268FC5113C8F6DAF0CC73D94057C7F40
+:10F59000E3BD23E6F0507CD3C70FDE924AEBE4F3E1
+:10F5A000A47B502EE70CBCF3C3E984E858D18B8AC6
+:10F5B000CB56E359278AB84CEBC46FDA976ED26BFF
+:10F5C0005A387E61EF1E685F5A10D8C5C7B5548996
+:10F5D000F7D742F7A9DA9F6A5FAA7DAAF6EF63E63A
+:10F5E000527FA216E0335CDE36FEB21F38CD90F3B8
+:10F5F0005D28F1CAE1FA6A701CD73513055ECBD2DB
+:10F60000F5FB1DFDA1DF948962BF974DF30F47DC29
+:10F61000A5AAAFC62D8B15ED40F7A0B7948986BE7D
+:10F62000FA2BA9BE3E1EA5B28F5FEC5B1F0F7EB109
+:10F630005F23BD77E57D4753FE0DFAECD3429F3D36
+:10F6400053B7BB21097AA3C9971AFC2E56955FF0D0
+:10F6500087C55CFF01BF5822E5747B9E276762D097
+:10F66000FEAD7AE0E92C8FE02F7EF0970F9E7EE9C9
+:10F67000F7139C01F9A9E6BF68E36FCD15F6607832
+:10F6800089F5DD9BDD4B717695768B13F7972BD73C
+:10F690005510BF6589FC5CA105F01D4A0715EB34C8
+:10F6A0007A5FACB2698CCFF83FC8972B37CDA637BD
+:10F6B00091149ED47B274A9EAAF97F57CE7FA1A49E
+:10F6C000E33913C5FE5B589D665942FB3ECD520996
+:10F6D000FA97E50BAAF4DFFBF0D4E75FCED980FD03
+:10F6E00081B8213A9F6C320B3BDFBE48D257CFAC7A
+:10F6F0007CFECD9B79BDCFB7EE48857EA2E6B154A6
+:10F70000DAF3164BBBDC12A9B7723C5504E369E986
+:10F71000E3024F95CFBCF127BCCB55962EF9D97D8E
+:10F72000229E7F51DB7EC2DB828D9BCD69BCDE8A4F
+:10F730008969BA7B32958DFCA0CBE1B970E30E33B9
+:10F74000F8C08A89026EA1F45E26EFFB2AB842EE69
+:10F7500068417E0B551FFC6F3F1F67F50A5B14EC79
+:10F76000D36A9C47245D5736C6C462BCCAC68A9F0A
+:10F77000E0DCA1F87DE8BE3B6513FB6111EF0FFBF8
+:10F78000F2D45417C535C3AFD59F5CDD2CF1F653C9
+:10F79000B378BF3139A2ED09C0217979B80BFC21CA
+:10F7A00033B393FCC6A067CCDB6210EF3D66D67521
+:10F7B0005EC03CB84A4DF75390E29D29A8D8F13C71
+:10F7C000BFD320E2AFD28D227D5EC28797FB51CEA0
+:10F7D000E23AE9DDB9BE779342E8D5C2766DC47BE3
+:10F7E000379638E66A7106E853F5A3E853D1EF403F
+:10F7F000EBFB85E423DFB4BE5369D21E91ED4A458D
+:10F800009C4AF9FD235CB0CF7CD33A2DF2FDC1BEFA
+:10F81000F572621D17DBCF7A33C5B965E0F56E2945
+:10F8200089EF67BDA1EB54FB44DD69EFF32FB40A08
+:10F83000FFC2298DCB2FDEEED40A1BDDFF52EB5227
+:10F84000F6EF6F1B87F0F6C458694FE88C841E5999
+:10F85000162EF7BF5FE4F17D76D07725F7D57B6D67
+:10F860008A3F9F6E94729175DE87FDCC9A32E87D57
+:10F870009293ADA722F15ECAA9A9627EAADD6AB3FE
+:10F88000883366911627DE3FE4E7AB934DF0FBAC7F
+:10F890004BA073E46D4D19C4176EF3C608FB83D4F7
+:10F8A000EF97483E18B1BA6203DEF95EBC2DCDA1D8
+:10F8B000F17116DB5D1F6FA3F657BBA00F466C9965
+:10F8C0006D4927BD579C03949F68B5C64A296E0CA5
+:10F8D0007C12FBCBF04A26E4CED26DE21C30CBC0CA
+:10F8E00036C24F38ACA5744612F8C4C31AC599B3D2
+:10F8F000EDFA77ACC6E6979EA7F35FC83B70ABCD39
+:10F900006DEE04F071AE6FC0DEB4D85E4A7A7BBD96
+:10F91000E49327B774D17BF40AAE57C4FF58441C54
+:10F92000704FA481EC70DF360EA84AFA9514DD28DA
+:10F93000BFD423F8CF78C0C94872ADC45846EF2968
+:10F940006DD8329DD2AACD255BBDA3107F5C1A3F36
+:10F9500081E66D263B5955FD7411AFBB332C06E78C
+:10F960009B54B33735582FADDA7137C5FF7CBAC316
+:10F9700046F13FC58ED9C53171F4DE31C5D7A97ABC
+:10F98000A94582EFD4D44FD7C5EF2CE67DE29DCDBB
+:10F990002FDB22E87E988ACBA94BF024150D16F1B7
+:10F9A00039E39D222E2789EA3BFBB58BABF4E36656
+:10F9B00011E711146F74E302DEBEAEFED928F453D2
+:10F9C000FBE0DB631C06B2430D47FF7DF146DB44E1
+:10F9D000BC51963C2FCD8A2DBD7901E0FF6B23C130
+:10F9E0007FA0F1AA0F693A3FDE6DBE68D25B3D7E13
+:10F9F00066811FD9E360A4177F6A644DD00394FE2B
+:10FA0000A2BE8F9770F934BA3515F4B16CCF43A903
+:10FA1000902F9F458A7CD99E5B7E037EE5D9152673
+:10FA2000F47313237DB8D22BF46B561DABDE23B5D4
+:10FA300095733A9A5E1421DE3DDAA68F3757EFDCD4
+:10FA40007E6612EFF320DE08F4FEBEC9BF18F87D13
+:10FA50009FEBAF38C7A61609FA7CBFD53883EE0DE9
+:10FA6000F18D023DE4FDD66723110FADF4B512E32D
+:10FA7000076EBCFFB3F23911178CF7E9E9AD506995
+:10FA80000769907690952F986724C791FE455FEAA5
+:10FA90004C7E4B7FF8AB91FA555FFEC07E3AB7D5EE
+:10FAA000ED13FA435D5B17E90F4A1F517187B5FBF0
+:10FAB000BA489F50ED1A0E08B8D41F10DF2BB20DB4
+:10FAC000CA8EE2D632719ED628EF7D31BF7CAD2939
+:10FAD000389F57BE16CC7E82B28FF4903E786FF678
+:10FAE000EFE81C5EBF4EF6CBF3E6A0F1AA414485D9
+:10FAF000E27B861DED9DBAF35DFD81186AEFAF0FC5
+:10FB0000DF0839EF6EB09B90B6D4DB49EE6F6F34EF
+:10FB100064E39EBA5B0B77418F6B97F7B706D7BE4E
+:10FB20006B83FD2089F51CC57BBBFE14CF0F8B7842
+:10FB3000BF0978DDC5188827EA3EFC493EFA9F3C9C
+:10FB4000ACF322DED4306B53CAE1A7682992EBC82C
+:10FB5000E9CC075D0F3E22F8F3A366B691DE6D3661
+:10FB60009532D8EFFDD2BFE8FDCA40EFCFB66BFEAD
+:10FB70009F05EB5787247D9686093FE3CED19E4DA6
+:10FB800098C77735F3A85CBA77681C8EFEBBA51FB3
+:10FB900052E9A9D3247F4E91E72BCB90443BE85800
+:10FBA000DDB7D3DC6E8AF7BC2BE74825E4F38F7B07
+:10FBB000AC142F30AD279CF4D6942133499EA977FD
+:10FBC000DB35A78995F1FA47720C7EC4C5FD9859BB
+:10FBD000C5BD006B887E6BB0D1FD64ADFD575F8104
+:10FBE000AF271B2F1C8DC67DD97FD3E8FDD1F2DE58
+:10FBF0008F1F7D8BE13CECCBA578E814CF1EACE7E2
+:10FC000064EFCC2E0F47DD8F1D6D569790172C7823
+:10FC10001DED777C15156B08CCAFBBE7637AD7B1C8
+:10FC2000BBC74A76DB69EDF29DC390F974273AE9C8
+:10FC30009E34AF47FA66B7DD40EFBB4D6B3F4AEFEE
+:10FC4000154E53EF195AF5EF1932674A0CECCA6496
+:10FC50004BE5CA417C8BC0DFE468FD79F1B522A198
+:10FC60002FBE56A4F5FBDEBD8A5B5172E565FB9E97
+:10FC7000DB845D4AECD3E5CACF7F299DF489DEF6AB
+:10FC80008CAF7DC7E26DE8155C5FB8708DFBEDA2AF
+:10FC9000C2805C9D27E1A4E4B38A5B9827E135CF5D
+:10FCA0006E10F009F9DD154537A17411C0BB88F756
+:10FCB00052F8643FE83886782C8EC751F733C2DF9C
+:10FCC00049C2DF57AFAFC7B30B438CEE2E4FDABF3D
+:10FCD000047FF47EF7B7C65F4728FEFCB611D02339
+:10FCE0001E34901EA1EE3B7AE47BEDEADE23CB6668
+:10FCF000C40FCA8DE1642FF4C877DA391F38063E85
+:10FD0000A0F6FFB0999DA320474FF2233AE6D769AA
+:10FD100068A3EFA993D269BF0E651D49F27E4E21FB
+:10FD2000F43763E07D6AA2FB16CDF7F012DCBF9CCE
+:10FD300067A77BEEDDBE90F7A9E53BE6DD4CF287D9
+:10FD4000F9EA1D73BE9F79BB2D0B4479DF3BE6C3F7
+:10FD5000199DA3B6E4B22CE85FEA777F067CC77CE6
+:10FD6000592CD94D1F79C43712F240BD5F3D25C5CE
+:10FD7000933869F095EF576FD54A17E07760BCA3C9
+:10FD8000C47C3B17843FB34780DB0F7BCFC9A648B9
+:10FD90007AB75BD1A9B2730FF3763D0C38A9B8DA04
+:10FDA0003F4B7A53F05771857121785074E73533A2
+:10FDB0008AC3053E1067D4F7FB316B247F51719DD8
+:10FDC0002FBB9C487F9CEAC99D847DB882C399EC77
+:10FDD000E89DDFC37A1FBD23D28DF99D94BF6B11BF
+:10FDE000BAAF8A261994BF98E206CAA57C2B577130
+:10FDF000024DFA3881D0774EC387964E06DCCE6925
+:10FE00006F8FC1C7D7FF8FB1DFFB27D74E127C2280
+:10FE100033D1336312C9B9693A7DF2F5DC4F52E848
+:10FE200077662E1F1D0AF9774B4AE975E8D79629A0
+:10FE3000FC077F4EEAA4388F3F2FF86B0AD99FD773
+:10FE400088F759BFED3CAF8C6B16F4B06AB1B89728
+:10FE500098CC1A898E1303F1B236CCE37F5B5C73C6
+:10FE600020EE782FFDBEC8CBCD6D19A787F783F79D
+:10FE7000B023CF3AF9C9C67BF8E5728AFB8D3EB252
+:10FE80002A8DE7371E3E5A4E71BEC9472EA671DC39
+:10FE9000DC7BF85591BFFAC845C4056F3A7C4CD459
+:10FEA00087FF6008633F397CBCDCCBF171C768CF4A
+:10FEB000FDC0D7CD971A8F411CFF7EED9CC56914FC
+:10FEC000D73A3B255BC4B5AE03DEE7C52F5A1FAD5D
+:10FED00005E25AF74D12EDBA2F887DD07D41D079D9
+:10FEE00018F8C1E07F3E55F1BD8A0F0FC42FD53EF3
+:10FEF000FC57C527ABFDCCF6B8369A418CDE7F3A6D
+:10FF00006EF8C949B42E7DDC70B7B9E731F22B5DCC
+:10FF1000604EF0895722DF75425EB4148AB846AD50
+:10FF2000A7C389FB18450522DF72A1C3093E8F3C98
+:10FF3000EC5BDD3122DE51C5C5B65CF027619F1454
+:10FF4000217E91D72FEEE929071F2DC27DDE34F4E3
+:10FF50007FFCA81C8FA1BF5D1744DC61B7ADC3E96E
+:10FF600090E3A01F3E6E1AF863D16A2BDD3B6AB99D
+:10FF7000D0B882FA29B3F78DAB858C6BFDFA71A7E7
+:10FF80006B41E366F68AF84E8CEBD48DEBA7B86034
+:10FF9000DE1FC59F76C7B81271EE57F96294F3FC65
+:10FFA00043F2772A8A9C7E23E4808A934AB0C8F77A
+:10FFB000B8E5B985D7A3B8CC5DBD629DE79BFD359B
+:10FFC000D84FC5926F175B84DC64867017EE639719
+:10FFD000182F1F4FC6F9E405713E290E2BDD8EFD4B
+:10FFE000D86012FC86C5A9DF4BEB58F6735EEF773D
+:10FFF000F1C9F4FB6243130FB24C9C8F97CFCC81B5
+:020000023000CC
+:10000000DCE07AF719E0FB77AC5513BFC325DACFF4
+:100010009D1941F750BA0F8F28C4FE9913E67C8EC4
+:10002000F17DDB3BE92BDAA773A29D8538F1F41E45
+:10003000FE6F914F703E07FFAE957D45FAB9F2D73E
+:10004000DE12F0D7FE17C6A99F79CE22F4B31E7A2E
+:10005000A7F9BF2789F7E9B8FE4EFA47CF75F2DD59
+:10006000CD1C6721CA53CD3D51805BF7659378B7AE
+:1000700096F544DD14E49F7DAC5DBC671B4AD787D1
+:10008000270B39B03CD34EEF9D35245AAD94B65F63
+:100090009841BF07632ACDC4F9C06DE9DFEEF88B44
+:1000A000C9425EA56DB004FCEF5C7EB8C399CA7B03
+:1000B000D938C6767C3FBCEFFC051163192ECF639F
+:1000C000DEC4C78B4DBAFA6ED4EF2B67E29936D5F2
+:1000D0003EE765FBE3EB4C723CE07989B83F112ABF
+:1000E0002F1AA6C4F6BD57487237CE46F7AE328DEA
+:1000F000D29EC7EB3AC82E28FCB7C9FF61A338BA15
+:100100005D364187990691EE32C8785F69EF53E713
+:10011000981F4FF14C9A3298FAF1533FC6FDB9D06F
+:100120002B92581B8DAFF433558FEB61366232F250
+:10013000F7DE8A8C867EE1F9CEE4A9A5930B41D740
+:100140005EF651909C381F11D5148CBF06A3DEEECD
+:10015000F9CEE469D44EB5AF6F9ACE3EA278443F53
+:10016000D14F7DA681CEAD0D46F62AFDEE00EB20E7
+:100170007FA66AF72EE7931FD1BB0D6E4ADFE3FC23
+:10018000F223BAEF379FD20F9A3DF4FD647335A581
+:100190009DCD8DF4FDC3E6264A6FBE35B200F4BF97
+:1001A000FCD05AF651907CAC6F337B82EFD7BC3BCE
+:1001B000B57F3AFAFE64E1B77937ADFFF2FB55F946
+:1001C0006481CFEEC542CFE474B9CE113BB0BED04E
+:1001D0001D29EE25BC344D9C5FBB9344BE71B278A3
+:1001E0002FD46D60DBD0FEA56916CABF9B6EA077C9
+:1001F0001DDCB1A2DF77B30CA4A75D3F636A03E007
+:10020000E48EE7DFF302F977AF12E5EE21E2BB9A65
+:10021000AF2A9F34A5CF8E9025CEC7C2FFCEE99DD1
+:10022000FAEFC36FB1985F687D759F3E141EBF954E
+:10023000FB96F605F477EC83B4A07DD1E0A47DA114
+:10024000E850D15FC314B15F33C3249D73D945F027
+:10025000830CC3F938C146FE4137FC177C3DBB64B3
+:10026000BCFB15FB41FA03D47E50FB40D17B32DF4F
+:1002700067C2DF21D631C9D8BF9DFEA1C962DD1D8D
+:10028000F191A41F77B79B1D9037938CC2EFD0DDFF
+:100290003EAF00F7C24BEEB637F6C7BFDE94EDFFB8
+:1002A0006938287E30001CAE58BF45DAEDFFC1F535
+:1002B000137F03DF5E2CEE6586D26BFB64657717D8
+:1002C00074FBCE64F741D04FB76633E19CD26DEB3F
+:1002D000FF1EF94BD3C4BE50F4D33085C97768F8FC
+:1002E0003A33AEE4776A3D7DEB5CCA88EF65CA7845
+:1002F000E350FCAA7505F1BDD7270F0EC09331AEB0
+:10030000AFF07E86D6D9E99CAAE8F7FCE0AF96402C
+:100310007ECD9FEC147E268351BE072BE449DF7708
+:10032000CD487157417286416FE9392CFC717E7E50
+:100330004E823F0B36E8E0B86BCB14B1EEDEF985A8
+:1003400006D809CEFFC5EE85DC3A3FA4E724F49237
+:10035000F3DBC47BE7BCC7591AEE8D20FEC789DFEB
+:100360006D117E10E3C35F9E843EB4E46123E92FE8
+:10037000E7716CE6ED963F287EE74EDD1FAC93ED0E
+:100380005AB65DBC997EDF8CD327F49F8F6C0DE944
+:10039000D08BA73FFCE009BCBFBEE4390DE6667612
+:1003A0001476779EFF78AF51FCCEAA8C3B9921EF53
+:1003B000F7D7EC16F7FBEB106F02FDE5C08EADF83A
+:1003C000FDC9FABD6666E3DF67E09D343ECED2B676
+:1003D000487E90E4FD6ED1C78D5ECBBC1B604FAEF6
+:1003E000DEAEFF5EB34B9FAF0BB9B7A84D91BF67B1
+:1003F0003092E5D2FDC42DC25EACF8F695FAAE9708
+:10040000E0EB5EA9EEEB7E41EF7B1B0F7F99FAA13B
+:100410005DE467CB7C17CF9FFB52C05FC1AD41F25B
+:10042000FC7349ACA08DAFAFE1B0CD013B40C30B35
+:10043000C24E70BE2D9AE0BC3CBC93FC0AEC45A3B6
+:10044000037AD83D878C6457A86FB7FD0CBF4BDB90
+:10045000F09C46EFD5D61F0AF309F85C5882F2A546
+:10046000876C0E27CA5F0C63B03F9FE778C3BDD887
+:10047000F3299D847FE0157609FE370BBF5FA1F05D
+:100480006F7C58F893973C21F1B36D9589F0EAD3CE
+:100490005842DA95785278FE95E1A93E3CA1DDF408
+:1004A000877F7F5CE29D21DEE6E8B64AFA5D0C8537
+:1004B0006FCBE18F52A1F72A3C1B399E7FA8DA3B14
+:1004C000E57B785F83E76AE0D9FE8FE3F98F908F51
+:1004D00085A4F77EFC53E8BD9116F2A32BBB86B230
+:1004E0005B0CAE7DF7581C1F7878E2B3A4E796C783
+:1004F0009EA95FC1C88E76ED14D8D1AE7B033FEBC9
+:10050000CB7E77FD53B9A08F167327FD6E8C3746CF
+:10051000BC2BDF9D367BFBF37CBCE2D8AF52F7638C
+:10052000DFBC1C46EE93B9725FE2CF1AFC2E60BBB3
+:100530008DEC6DF5ED61C2BE7640EF3FEB4E12BF24
+:10054000D35762E9295F01BD9CF78771D479B0B6B2
+:100550005DFEFE8B3CBFD52A3BC3BE90F7A11C6F4E
+:1005600050BDBA2922DE36236192137CA86501F3BF
+:1005700084677C1DBF67C4EFD5EFE50DA8070EC0EB
+:10058000F795FEC7BC7A3B87E23F4BE5EF4BF6EDB4
+:100590000F99AF5EEB8DB21A89EEE8DD86BA47C5DA
+:1005A000EF2B7E02BA8B0AD053838C4F3BF6FDDFD4
+:1005B00098F03B4DDDBBC4FD08CE21B7E29EFED9CD
+:1005C00036110F5753D035C6EFC4EF74083EB46CE4
+:1005D0009FE673A6F54347CCB741BC6B1F424FFB68
+:1005E000BEFEDDC37B037C64D4DF393C77943029C5
+:1005F000B7BCFDC64FF6C9AF90DFF1F8DF16CFDD0F
+:100600009BC3D7F335FEC66B13F5EFB85CE7D4FF99
+:100610004ED377B2F5BFD3D46B97F091FAA0D253F3
+:100620000F4D11723C3455F0BDC1A51F479D8BBFC6
+:100630003B4E3FDE6CB77EBC6F8B977F555CEB37D4
+:10064000C1EFB81CF7841CF73772DC7F164E2A1DE9
+:1006500068BCFF5FD3FF0B8D21EA0800800000001B
+:100660001F8B080000000000000BB55B0B7C94D5CD
+:1006700095BFDF7CF3CC7308210904C224242160D8
+:10068000880324542B94C9D300D6065C2D688401BA
+:1006900052C83B80B5D2D6FE3208222F5BA8D1A229
+:1006A000224E82E1A1613B118289863A286411AD14
+:1006B0001B698BFDFD56DCF828F23213A374E55755
+:1006C0005DF6FCCFFD3E321942B5DDDDE4A737E72C
+:1006D000BEBE73CFFB9C7BA929CE317C394588DC1B
+:1006E0009873E69E08215CAB7A8A12B385E87B4357
+:1006F000154D0E2184DB7BBC3E5688DA8EE16253B9
+:1007000032C1257D6F1A00B78DB36FA2F18DED7FD9
+:10071000781BE3BD07558785C65F6BFF280AFB5C26
+:10072000FC325C88E158F7519420B8FAB2C2F02646
+:100730001A77103CAB5515FE4CDACFE83363FC62F8
+:10074000AA0E7BCD82DA929656730FB5557B5B79F4
+:10075000FC0D9F69F0F8DEC641E376CCA7B6CAE887
+:100760008DB2537BBE5DDFCFCFF3AB53159717FD33
+:100770007BFF10B70CF35ADE895B4AED15FCCCBC4D
+:10078000B6FDF4D00B996E5A57D341FB440CEC5391
+:10079000D361D2608977756A6B510CD14BB4282232
+:1007A0008D9A8B62AB584DF4AC6A6FAE16D45F95E0
+:1007B000718F49105D023EB518DFA71F8388A375AE
+:1007C00076FA8BE877D1F779D452DAF755DFB1DBD7
+:1007D0005DD4063A5F8FC2770307697EE6003ED399
+:1007E0005D44BF1CB4662146D0BA83AF4739687CEC
+:1007F000A3EF75496FA39FCFFD9A0607A8653AB787
+:10080000AB7CEE8A2F55A6BFBEDFAD2E95F799D5EE
+:100810009E1689739DF4C9EFCD7539647FEAE23283
+:10082000E07F2261418E9ACC78BB000726CE69DE3C
+:1008300044A854F968DFCC6BE9B654DBB7CB24E6A7
+:10084000FBC0B7D4035DA3483E4E140F9F4C235703
+:10085000E7DDE332F0BC22B33B7505CD3B19E188FF
+:10086000B4D37E0F158F8B045F5F438BFEE25D6612
+:1008700037B59507E5F74EDABBA3206F270F4E5526
+:100880003DCAC07E776ADF15C2C3ED00DF3CCCA74E
+:10089000726F6304F619E09FEC9FEBB2F3FC13DE7A
+:1008A00077EEBA87CE773223DC09BE749945B98FCB
+:1008B000E5843E82EF752636820EFAF7E6821FB493
+:1008C0002E906160BEF6B69BB479F7348B41F34C41
+:1008D000CCB78BCF0DC6C7EEFDE097F7D0FCEA672B
+:1008E0005461A1EE6AD38A389CFF931D83F12BD704
+:1008F000E85C6DF2C7C505C96B75C7557D8960F9A0
+:10090000EED0F5C3C1FCD4F978324395782558BCB4
+:100910008250AE6E6D66B92675F3D8A6702BECD4F6
+:10092000268677272B74FEC407ACCEB584FF738A66
+:10093000366EA03686608384CDD45AA97DC624FB4A
+:10094000A1B6583F86D8A9106C2A1E976348A17D8E
+:10095000D4D6C9E0EBAB335D8FBA088FCD334B668D
+:10096000CC043EA26F99A06FD65C8AF08868210AF9
+:10097000D5F79EC077FB0F9A04EC478DB5A3F263C1
+:1009800092D37E27290AE1DDBFC3E4F5B0FCB9228A
+:100990009469422CBB49EACD270EF734751CCD5F14
+:1009A00063E0F355B7A85E1BCDEBAD271210C93F2E
+:1009B0006D4DFE01E4B5FAB86AB7D2B9F37DC9BF8F
+:1009C0009A0EB8C5E4B4D0FA5A1F75125CBB57F141
+:1009D0003AE4FE027A597313CBBA3863AB4D11591E
+:1009E000D4AEE93363DE99C38A788CE66D0E8B6AE8
+:1009F00002DE3599B3CF2951D4AA5BD627D27ECB5C
+:100A0000B79B3EECB1CAB557E8BFBACE6D2CB7154F
+:100A1000DEC1FD557B07C335C23800D3FECDF8E3F8
+:100A20006621DA5C91B1676EA0BF2788095754D060
+:100A3000697A3CF4E104F84AF2241A88D82385B88C
+:100A40006F92331E7ABFD1E8980D3A043A4D76D0B2
+:100A5000ABEEF0810AE0EDAD0E731AE8A8B5AB5F1E
+:100A600061BA06BE20BADF486D82E0F30784A46F46
+:100A7000A05DCA799D49F15AB19E68C8FB5915EF2E
+:100A80001A1A0A78FAA3D83E09510CBD58B520C7E6
+:100A9000003B07351684CAAF747D506C46251AADED
+:100AA000D4FFEF197BD4614176E23F5D298C7F81D1
+:100AB00059B87DD47F5FA4331A723FD61A9505BC0E
+:100AC000C65A93BCA0FB5863DF1A7C7FF328C5F19C
+:100AD000106D7D24EBE5C90AE0DA0827E4444958A3
+:100AE0006C043D368F5A6C84BC8FB5FB324A32079A
+:100AF000E0028C431F8497BF5714E136E23BCF8D51
+:100B000054FC06DA3F6023FCA02746BB09F8054CDD
+:100B1000121662CD20FCC82231FCFF8E9F9DF08B07
+:100B200018C08FF81D8DF59F67137DA84D9A2B4433
+:100B300037DB85156C17747A5E24792F205EA52922
+:100B4000526EAA771C29C2788DE85E8F754551F2E6
+:100B50001C45380FE030D9AAB9925FB95A7B7FAEF5
+:100B6000F42FBAFDECC8751973A9DD9E5B62465B74
+:100B7000A866C6F70C61EF5729569693CF49FF60D8
+:100B80008FEF5DA1D8533306E45BD7AB3AD97555E7
+:100B90007FAA7EBFCB2C52F0395777068D970BA9D1
+:100BA000D78B56DBECA9C17A043D237A94DB2B6EFC
+:100BB00013A46FEED571F6D4A9D4AF5E340BC89EE2
+:100BC000A65FB1F47B256508FDF285E865FB60D87A
+:100BD0006F9372EE8F54BC6B09FFD4DCC17A97A47B
+:100BE000E941A35BE1F3357E6564D853AA7841F30C
+:100BF0003BA973758C7638CC2BCFF5C23FDE4960AC
+:100C000029FA1B62594F7990ECD7BF68E7BCD3E84B
+:100C10003F02FB71CCE44BB6D3D0B11AAB13FB2F20
+:100C20001014E8905D2B15DDDC9E0AAF6DF3F3E642
+:100C30009E3190AF77DD1627E2B0C6754D91B0E3D7
+:100C400059629DFD4C06820AB1F7CAD4EBC7332422
+:100C500038E28CCE1738628A53C06F9DAFDB735D6C
+:100C600079B939D75F5FF5A7B6DBBF03FB757FB3F3
+:100C7000395E8A4977C6B401BEE97CAD131EC65BF6
+:100C8000E7D755FE11EEA3410FF5E25CB633CFAACC
+:100C900082E30A8D7F56FA1D8A7F3A7D676A7C5807
+:100CA000DE21ED51285F757AFF9036C4F7C98FEECB
+:100CB000607E080BDBBF50BE7F135F28C22CC5507F
+:100CC0007EAC45809F8906691F1397919C10DEF7C3
+:100CD00008F7E11E6AEF0A7FCBC472A8F1E75EF065
+:100CE00087A6BE2BBCDFCF48FEBFE34F476EC903CC
+:100CF000C17A18AA77D7D3B36A87F3DF75BF47964F
+:100D000086F42B443F43F44FE7977B7514EBD9559A
+:100D10003EAA2D525F357E45D0EF90FA863FE87BA4
+:100D200035ED8AD79FFC2DF44F21C4896F8F85E85C
+:100D30009DCE9FEBD91DDD4E9D16FE63763AFFA931
+:100D4000141907787E62F136034E3794C3EE9D9AEC
+:100D500028DB039A7D0B6D4F539CA3901FDB94718E
+:100D60007204FCF529B3BE8FCDDB4CF89F5ED33DFA
+:100D70006625AD3F9D2BDB53880B83605798580445
+:100D8000BB7E7AA4C5033A9D5626E4C13F9C561EFD
+:100D9000B85DC2F16607E005F17976824F99E47C8F
+:100DA000DDAFE8F6FFF482EF14F03C451C053D1C76
+:100DB0008A28E1EF284A4C31E173FAFEB4296BC569
+:100DC000C0F99B720DBCCEABD96FC283E9DEF7537D
+:100DD000C5DB445D8BE05208FFE4BCDF14A750FF85
+:100DE000FB3F1B3719FC75AD1AFC7DF8EBE41B01CA
+:100DF0006FE37DBEF7659F6971905FBAEA270B3E8E
+:100E000093FD653906E84BB9C64357CC8468F0A713
+:100E1000DF3B2E1A7E47F743FDC70F44B883F876B1
+:100E20008EFC94181F044F783429D88F1DD9BD39F2
+:100E30001DFB949B3D594EEA3FDBF87412E28DF2A4
+:100E4000DD8FA4731CBC7B633AF299F2A6CDE92E28
+:100E500086C3DD9C4F19E5B92FECBF79D7A6A0B8A2
+:100E6000BB2A5F65FC4BAD470AE16F67DFF0E9C362
+:100E7000769A97F633C50EF1BA57743F0CFFB81047
+:100E8000F131F2B7062BDB73DACF05FE374FF8FEF0
+:100E900073D0E313191F99CA68DEE55C23D367A1F9
+:100EA000F06E89A771B141B1378BE0F9631A317FD8
+:100EB000F13AC59C003BB062D864D58175C3188FE8
+:100EC000251B2677A17FE183B27FB6C57BF024F690
+:100ED000F98DD9D9EC607B9352326900FFCBB966AA
+:100EE0005EB7688BC2F1BFFE9DB427E21A83CF794B
+:100EF00059E3BFF8CAA2802F3FD0F872DB83EF1C02
+:100F00004DA07DEDB1EE2BB01B6F3F7E26D54FFD82
+:100F10000531E73221E76966F75315387793C589BC
+:100F200073646725AAF1347FCA8F731F43BBE8C17E
+:100F3000C54F55C0DE6EB772DEA6E3B74A711A60C0
+:100F40008F5F6FFCE112D0EDECE3568EDB57358EF0
+:100F50008F1743E8A9DEEE21FE3B28D1D9576FE574
+:100F6000F6857ABB70903CECAF4F60F8B7F50E6E2B
+:100F7000C57C295FABB4FCF87AFB4DFD325C3828A8
+:100F80009ECDDE60130EB2534971AE517974CEB46A
+:100F900089354D1BB573A5D1FAC99EE47CD0217B60
+:100FA000E3CA2E84BCE63C998FBD797243128CF261
+:100FB000F2073FD85941E373F34AC6E551BF75C7FD
+:100FC000675C5778BDE39185A0777993459E4F3B49
+:100FD000F7D9C7D3E39FA2FD3D6F9838DFAFDBF1B0
+:100FE000C1CE8DD42EDDB2D21C2CEFDFF6BCC91AD7
+:100FF0003EDFA457D7A3C33FAE579B93587F9A4871
+:10100000AF32FF79BDAA7B700DD3EF81BC92D9A01E
+:10101000FB59932709FA7476C20C9673CF6185E960
+:10102000AFDB717D7DB176DE2A836FCBF4E4013BCB
+:101030007E4964337D8F747C928EB8F752FB82BFF9
+:101040007BEE43746E3F9DBB9DE8EB1F7FEDF83454
+:10105000B37B9C93CE37CD20E3DD6BE2D63C835649
+:101060002FE83697444A9A2BA8CB68FE93FC982722
+:101070009AF0A9EE54FC6159F067B79E3322DFA3C2
+:10108000BCF1C3E038827E3E0CF2DBD7C3F79BDABB
+:101090005AEC93366077BFF36783F007F9E99B7BDF
+:1010A000C2843FE8BB57F313EA33139F7A3B46B23F
+:1010B0005D00DF8CA8C7754C68027CCE2CF9D87B0C
+:1010C00088E22659C711EAB481739EEBB890053BBC
+:1010D0001B7ADEDA972FB07C54B73FF299C2E79FB4
+:1010E00075CE98F5CDE73FB2FB4216F877CED433F4
+:1010F0000DF956AFB9270B7CA87D45DAF37F940E26
+:101100007A7FC5063A08E979AD62653929542F72AC
+:10111000DDA0F7B8AC1BD476EC627BDADF29EB37C5
+:101120007586EEA278D43B567CD0057BD69F20F303
+:1011300028DADF05BA4D1FA7F941635FD25CB26BB5
+:101140002F5E950799FF9D85FE8EC73EBE6AD8012A
+:1011500091152E10579C873E53FFC2D5C9EB21E74E
+:1011600067BD23A6C03EBE99F5B75AAEF7BD1A6E4D
+:101170005739EEA1DE20FE5D3D875715AE41F58063
+:1011800070E10A9A576776FC80E3E313AA405C5744
+:101190003751EA937859EA53CDBA23E684A0FD7615
+:1011A000429F186F192FCE7EF56FAC975B66BA3AE7
+:1011B000A197E1B085D82F21DAAB28DA3CE27FADE8
+:1011C000864344A796F717AB3C5ED7AE8A915893F7
+:1011D00010E94DA373148BAD46C4D3B3856F3AEABF
+:1011E00036C2D8F3CB5B687CCEABEAD44D82F3A792
+:1011F00045259C57BA5357213E32281A5D7DD97335
+:1012000083FD599EF453D35585FD58DFC8708E5326
+:1012100066CDAF2905BEFABCAC61721EEDC37196F6
+:10122000F0F665CD857EFAFBB2E6450ECCBBEBD57C
+:10123000F015EC17852FFBAEA0EF84E5CBFAE8E7BD
+:10124000E4472027759764BDA350FDEA09C4E7ABC6
+:101250000E93BC203E3424BF6B801D273A83AF170A
+:1012600088AF2EF81FB770B9A03F934678A13F759D
+:10127000FB1561449DA8C3D2843A52ADA9270EF252
+:10128000BCB1FD4F66C8735DDB3B66C724AC977588
+:10129000275248B6E3759AFFAA691FFF2EEA7C35EC
+:1012A000C7A517AD31BEC3F97BD5C156CED3AB852B
+:1012B0009FF3F4EA96C1F2D29FE0E0BA48A87E8498
+:1012C000E53B06E9C5ACED522FEE52C50AD839A16F
+:1012D000D5696725C4733C32B04EC6BB2EF5C2C378
+:1012E000885F02298A53A1AD02619E75888B3CE913
+:1012F000329E09FCEE85EC656C57BCD977D0B902FB
+:101300005ABC3B6BC336A31A84CFAC4E59970C849E
+:1013100089F243CC6FF768F041B84A22F27358AFB4
+:10132000B26057030659470D3D47BD562F3A817AA3
+:1013300052E600DE731213A51D135E969F2E83FCEA
+:10134000BECB40E35306D62FC997EB07F2215907CE
+:10135000BB9E5DD94DFC2923FEEC253EA37D9EFC62
+:101360007119D99916F2C780FF95FC315A5F7D0635
+:10137000F7BF58EF64F860FD4D0C1FAA7731DC5EB3
+:101380005FCCEDCBF525DC7F02A87E17FF7BBA1181
+:10139000F2D0051D1B35009F8A0981470D9E7F2ACB
+:1013A00046190C8F52787E76FED38D1ED48B66DA6A
+:1013B00035FD764422FE3A6B9375A8B33659876A99
+:1013C0001DE5BE259FC6CB66ADDD2DF350573AE631
+:1013D00015C42CE0FCB59FF257D8A395F9EE3CF06C
+:1013E000E5F8F1FCD46D6C276D5C073D75F70DD108
+:1013F0005C077C83F271FA746EC6D475D904E74633
+:10140000282CBF642F6E2CD1F34ADA27BF53DEA3FA
+:1014100014AAD565D87FD548DB54D8DFCF5DEEDB85
+:1014200080874EEFA251CB53110F75991CEFA28EFE
+:10143000EBF9BD49209FD2EB7DFABC0E57EEDD588B
+:10144000372B63DCBA29B03BA464B0732EB36801B8
+:101450005E2E43B8B296ED96C3083B70B726C779A7
+:101460000E1917FBCD0E630CEA3761B9B11E5AD7BE
+:10147000A5F1F9B8C6E7131A9FDF429D8CDAB7A928
+:101480001F6D37F5A39D01FA4A7965BA3D91575210
+:10149000C6F22BFA9200EB75C1D9D02F696F92205A
+:1014A000D75B34F94DD0EC4D576E49955CE7E37D41
+:1014B000AAB47ADB05ED1E443FAFBE6E60BDE07698
+:1014C000DE8DC263859D7F49E69D6234C52304CFCE
+:1014D0007B299EED906ABD23F363D2F37953651E99
+:1014E000200E58E4BC04470EF464AD566FEDF51AB7
+:1014F0003C26D4A763BAD363E07F35FDD2E143FF36
+:10150000ADB2BDAE994230B5AF28F27C35F3BAD357
+:101510008761BD6233707DBB498E9FD4F4AF264591
+:10152000DB4F3B8FB0FA92C08FC0E197929610BC10
+:1015300029C2BF4CDA7D7F3ADB6BE14F9F07BBA826
+:10154000F8DE174E8A2B0BA62E318E043D7C3B0114
+:101550005717E42C31DE8CF1D6F7EDC1E3237C493B
+:101560008A1D70B61C1FD1BA7398330836BDF83E79
+:10157000C6CD869C250504CFB1788FD7436E7E2BD0
+:10158000E5CBB6BFED0CE856D521E3F6BCFD6D17F3
+:101590005F845F6E8B74C2BCEFCB4F667AAFEDD8C1
+:1015A000B305F2D6DB2AEF0336B5FC69E7CF799EA7
+:1015B00005D724B4AF2F5BD077561EFDE362E0352C
+:1015C00027DCF705E0878ECE643CE70C977AFDC8F0
+:1015D000D1BC25D0D3DEB6FD3F81FECD89A68016D5
+:1015E000F8BC60E33A44E5810905D0D3DEC8EE8556
+:1015F000D8BFF6798B13725A79203E0FF58143F9E3
+:10160000B21E5E31716B12FCACE1E57DBB7F8EFBDF
+:10161000D5E76D7C2F541723E3BC4AB571DA4AE64F
+:10162000DFAEDD4F03EF7D36BE9FAD40AD8AE08A71
+:10163000DD695CC77FE5EB8F16820F85EA8EDDE8FA
+:10164000FFE2399B017438697645CF801E9E347164
+:10165000BE59A1C115A7864B7CC27B8A987FB15B1E
+:1016600093E0672B87FFF476E03D47DDBA13F98EF0
+:10167000D863E1BB8973FB886EB4EE5CB3690AB8CA
+:10168000DCBB2FD20879B9A06C5DF814F66F96F325
+:101690002ED8B6323D3DCDE305BE47F304ECD6056A
+:1016A00065DBA0FE73CD7BB2908F9E7F7E0EE7A59B
+:1016B000BAFCEAFA52F99C65905F644B40F6A85276
+:1016C000FB5BD83D2282FC6D85069E3FF464EF53A0
+:1016D0006260FDF91693DF4C34AAB08875D6980184
+:1016E0007DA84CBCB518E7AB3434A6236EA998DAB4
+:1016F000B3107A71CE26AC0934EF4DCD6F551E5C18
+:101700003317F1EFF5F0B9A2D9A34B09D27F5D6A87
+:10171000B77983EF2543DBF7EA85FDADB401F8DE49
+:1017200015168EE1F5FDDE34FBAA91A7D5C648FB60
+:10173000F13ECD6F213BF6B5E6EF16AD1E3CBF3F47
+:101740003F86BF5F6BEE4987FFD3F70FE46B7EC325
+:10175000D8930E7B15BA6E0EC211D8911714B6230A
+:101760009507950F54A253A5D5E355411761D6CFE0
+:1017700069BCA2C87509D334BAD3DA0D05C9FCDD3A
+:10178000CA169BCB46EBAAC27AA210175547F6445D
+:1017900021DEE97D59154D1ABB62E334FEA4682CA5
+:1017A0000BAA3756F84C2E5BD6107C46FC44F396B9
+:1017B000E36FFAFE3305297C9EF2F670FE9EB0F7C9
+:1017C0004C839C96EF18BC0EE7B207E95F6FFBAE47
+:1017D000B8E0BC3C45C33BA07CC07A12F8FAC324F5
+:1017E000F0BDD220D6E1FEF23CADC1BD26C1C22A79
+:1017F00061BEF7ACFC6B4418E4E5FCA56AD6DB5E81
+:10180000A587EDDADB0573D92EF59A7AD8AEBD7EC1
+:10181000F42EB60FBDC37A16C24EBD5DB05C8E8F7E
+:10182000EC59E8A0F1FD3A3C46B0DF7FEF680DDBF4
+:101830008F39AA7C57217699ECB21EB4E1543DE76A
+:1018400017264770FE7DBA40ABF70CF087F32E5D8C
+:101850006F7A8563FF41E8617904D775288E6A79CC
+:1018600011F1DE823827DE6B94639D940373F07D63
+:10187000636CCCE565E0CF1DA3DD450539B8DFEC31
+:10188000E13C82A49AFD4DEDEF2C9C4F064C7DBBB4
+:1018900061A7D247BB6717101ED5E6EEF5D984D2F3
+:1018A00045534F174AE4B355698FC41E2957BD9954
+:1018B000BBE43D8D765F79B7467F41494C23E442D6
+:1018C00091FC7DBDFDC05BB02BBDDDE3D81E87EA7A
+:1018D000CDB9F6C7A2601FFE4C7EDC1394EFFF79F2
+:1018E000F11EBE679D8FF720D42E5937581EFABFC0
+:1018F000BA83F33EB125A81F72D830180E9523C8BD
+:10190000A37F90DDF130DDB76B7A5595D75D0B3A4B
+:101910005C85E711AC06C1AF85C021F345898C1306
+:10192000B6C3FF133DAAC7F84F719EBEDF2460C740
+:10193000D792FF62B82DDC8B7CC5B09FFC53ACF412
+:101940004FF00B5551DD5C9FEA6DB3F07DEF431D09
+:101950009F24E1FC24875C87A9EA78290EF9FB3EE5
+:101960002D5F203F18C7EF63DA3AE29077E8FDD5A4
+:10197000065F3AF0A28888E375BDBF46F5A703FF6E
+:101980002AA53B0BE3FBF2EDDA7C8255C082CF51F6
+:10199000AD487D171D2ADBF350BE3DA9C92BD98563
+:1019A0002C7EDFF1B2AC0FE876A042B327AFA13FA7
+:1019B00053EABD5DBF57A2A515D0F721EC43428184
+:1019C0001E17AFE0FACDE3050E096BEB795F595FA7
+:1019D000E2F1DA572E64A564629D362FD80E8D1B76
+:1019E000B02BD0FF04D6FF874C7174AECA9D8A73AA
+:1019F0002DEC54E99A229A2E961B571671DD4C78DD
+:101A0000386F0BC52B548E2617483A551A8615C6C3
+:101A100006ED779E6C7AC214B6337ED89D1FC53E04
+:101A20005A843AC50F4BE5BB81ABFE2658CF719E59
+:101A30001DD28E436DAE18AE95E3E52B1AD7C70FB6
+:101A40008147289E15EEC6A238C7B5FD3ABEE76DA0
+:101A50003A7E79A611C17498BFA66804B5CBADFFD4
+:101A60002C1DE479CF7758FCF0AB15A52BD7470F89
+:101A70002137D7F8831D41FE2B05FCF5F2FDC6F595
+:101A8000F00F6DAB15FF29D48B04E95533EB17E943
+:101A90004B905FB8B920A4EE50BE782CE26AE15EAC
+:101AA0003C167E86F46AA17388FC920CE42803BF7E
+:101AB00019F1701B8ACF5F0AE4BBA49B0BA49E6F35
+:101AC00099E90AC06ECE500D1C8787EEF765818CB0
+:101AD00027BAE322EFD7DF7380D9335449B74443A1
+:101AE000FFDBD0B7C4B84807EE830AF3C3E5BCC335
+:101AF000363BEA3781C397B9BE1B783862BEBC3724
+:101B000088102369BC2B615253B01FF975A13C6F3B
+:101B100078B68C5BEA324C7FBF3E941979B53EC4EF
+:101B200071436638DF97F4B67FCE7E2BD09963C7BA
+:101B3000BD466F376587A44F755FFF571CFC6B6F01
+:101B4000E75FF81D5AEF579FF0FBB48DDAFBC0D763
+:101B5000DAB5F75DDD8E48F4078A3F2AC2BC4D5ADC
+:101B60003B502790F562BDD5F35FBD1E1094078FE3
+:101B70002E1C3A0F8E714704D7091CF143D55582AC
+:101B8000EB04A969B24E801675825493AC130046DB
+:101B90009D002DEA04E8479D0030EA0480512700AB
+:101BA0008C3A015AD409D0FFC57CF95E2640422CFC
+:101BB000EB97116CDFEF6B56BD88CFEF3B2CEFA19D
+:101BC000EE6B54F89DD645FA3EFCDC35EF750E6A97
+:101BD000EF757CDBF85EAFAE4D75825575A6BE63C2
+:101BE000A8EBD4B52ACE35B02FF5F3F9FB1B3B7328
+:101BF000DE2D457FB3C96970804F97E250AFAAECE4
+:101C00006CE6FA5341FC6133F3B74511A897DE65E2
+:101C100091796E8D4ABD53F83E94E3E01A4B37E755
+:101C20001F557B157B59F07DEE4D9FB11D586B8B79
+:101C30006A029E353E9BBD6C88F71F7C2FEC1057C7
+:101C4000EF9B97C929A226A288EF9B97E19E995AFC
+:101C5000A17E65E4FB634A4C87431EF1AE2A03660E
+:101C6000DD2EF53EE43D556567EBFA4471ED3D34FC
+:101C70002A03E07FE8FDB3BB3032F64C380C859880
+:101C80008CB8A9F8F1B2FD6DF4BDFEAD168E3B56D1
+:101C9000E6BB97438E8E995C5C273976D8C6F9D11E
+:101CA000C7DBC60FAA937CEE725717F2FDFC68AE35
+:101CB0005BAC3229EC97F38BC7C5F3BB81E326F607
+:101CC0003F1DAE925ACC5B35C9C1F5A9428BB89F76
+:101CD000F7D1DE6951CBFA54B856F11A085E2C9C44
+:101CE00066E8CF22221BCB8B296203DE532D12F232
+:101CF0007D832E37ABB6291C1770A1200EF7929268
+:101D0000BE8B3AFFED32DE2F2CB5C8F835D120EF6F
+:101D1000B31337C9F72D3F126E33FCED72F28B68A7
+:101D2000C94FFEAE87FADDE1A393647CEE88C7FE5F
+:101D30008B4F98F8BD6F61FCF7D3DDECAF0BF81D4E
+:101D400083E2BF47BD72C3F5F527F41DC33193B4D9
+:101D50002F4447CE8BBA20975C9F71737BA2BE9CA9
+:101D6000DB1933A59DBEFA2E91786407FEE17DEF65
+:101D7000235F4C8C8F74C2DEE97A7FCDFBC430D9EF
+:101D8000EAEF13C7502B82DE276E713978FF44C308
+:101D9000C9A90ED0E3AF114ED0437FA7B86566C97D
+:101DA0002EF0C915253CF82EEE51B6125D8B701041
+:101DB00005756E9F4B45DDFAB062E777D1D7D8C97C
+:101DC0006D0FE31D4F5DAA62571CA8876F2D8C23F2
+:101DD000BC8B529219EFBA76592F650AC5A19EAEF7
+:101DE000E983CBDD563862A07F8EA617BD345FCA6B
+:101DF000C92D5EC8DBB7A8A33E87F91E6173366B99
+:101E0000F91AF83EE786315C4FD5E5A6BF25BE0935
+:101E100072F346A1F433A5A5EF98100774E5BA8FC5
+:101E2000E2FC0BCB3E7B388ECF37741D8BEC28DF6A
+:101E30004B86D6B174BBBC5BAB83C37E1AB53AABE1
+:101E400051ABB31AB53AAB51ABB31AB53AAB51ABD0
+:101E5000B31AB53AAB51ABB31AB53AAB91EB772B9A
+:101E6000B87DBB7E35B7DDF51E1E0FB2FFEF5DC737
+:101E7000FE87D6413FC2BCD03AA8B03AA2D98F92D1
+:101E80007ECBFA7348DDB378F8920D44BFFC06B3FD
+:101E9000135D7A1D14EF97EF8B607B70B170C8FAF9
+:101EA000A74EB708AE97F60BDB14D03F2F639CD13B
+:101EB00040E37FD5F8A0D71FA11F381FF4032DF4EE
+:101EC000C39836A01FCF984985B3A5BFF7B0BFB759
+:101ED000315FD7AF21FB41F052611F643F2E86D89E
+:101EE0000F4A3CEE061ECB3AE5BB26FDFD661E35CD
+:101EF0005F4E19C29EF8A43D1913E6DB87EF8CA94B
+:101F00000DE3F7C1C7B4F758C736CA777165A28425
+:101F1000BF3B845D89023F960EEF7BFF699ABF74D9
+:101F20007304C72DEB472E9BF6BFB12B9F150AA656
+:101F3000DB6FEAFD951F132E056152FE0ACC2203CA
+:101F4000F735C210C67A50A86E51703FBAEA5E31BA
+:101F5000197C2EB094EC009EF1DAFDB688D5EAAD7E
+:101F6000C6EE8A3D049F8C4B74E25E6B74C2218185
+:101F7000F74F8575C599B08BFE31EE09453978BFAD
+:101F8000BC55C1FAF04C79FE3B8AC39B205781C3F4
+:101F9000E373C0EF7916471BEA00CEA284A5C8F30D
+:101FA000E7453B72500770768D9270BCA34D71224D
+:101FB000944D585AC0EFCFAC5B3FB6E2DD9A22A2F7
+:101FC000E95C9661EE1C7CA7A6F85399378B3EF628
+:101FD000633717C9FC6BC46BC28F7BABBE59917C56
+:101FE0007F26321D3918A7B8F2BB45241F7FFC9EFF
+:101FF000EB16AC4FD4F08CC72DA20AAE76DBD09E88
+:10200000D0EEF3BA0CEE52B445511E23F71BBCD9E7
+:1020100068DF34F87E8C7E92E722EC57F4D8E489AE
+:102020001904275A7C6C273B5CAE5BB1FFAB335D78
+:10203000C5180FAD9F83B7C8F3099FDB302FF41D80
+:1020400096CECFA54552EECB8AA4FD98BE56DEC7EC
+:1020500086F2BDACC8A0D9B7BF8F37E15B8AEFE984
+:10206000F88BAD8BB3810FE17B2FF0247C17625C82
+:1020700044C470BDE3FA72E6E1EF951549F9227B9D
+:1020800056F5B1B467DCA61BBDC3103F8EFA857749
+:1020900018F01DD5D867C3BFC378D6D367837F7FB9
+:1020A000F6C13E1BFA9F75C977D2A1FB3716C9F757
+:1020B00013E9D3FB78FD58FA5637C7E97DC31047BB
+:1020C000A5977FBC5EDEBB64B07F19ABF997B1BF4B
+:1020D0004869EF21791BFB6434DF6F8B82581EAF98
+:1020E000B44A3DADFC45D9A1366AC76F277C83E26F
+:1020F000AF095EC27B505C64EC97EF2D09069DF63C
+:102100009A1886CC22BEAA11F2BDE528CD6E206EAB
+:102110002B25BB50537EF432BF03C07AEC8F3B5B60
+:10212000C85FBB49C2E4AE918F2E9FBFA68BF3C39D
+:10213000ED57FBB57CB3753DF2678ADF06F5579620
+:102140001DE982BFA9DA3BB8BF66C5679CC752FCD0
+:1021500036A8FFDE1F7FC0EF6CEADA07F7137F9F18
+:10216000029F75FE1E33F92620DF3B5613E694FFCF
+:102170007EC0B712FADE541DC1EF6777FD3A8FE5D6
+:1021800046E737AD6FFA76F2B196E77BF24406F494
+:10219000E19BDA5ED8A7B441F6C9C375BED9916C8C
+:1021A00077EAB4FCAAB6CCCE7E3EB1D6CAF6AB5026
+:1021B0000D7302AE354A3B238A55CD4EF958FF4F79
+:1021C000DE3E8CEB797C00C03193F8DD71DC5A097E
+:1021D000F78DB0B07D28349454EFA1F6A86105DBEB
+:1021E0008104BCB824BE3F03FBA0427F655DB5CE31
+:1021F000EC53E4FDBE2307F9AE7EDFD4B0D1DB7A29
+:1022000010F9B2E27D7219EA8A7746F0FD4100F5D5
+:10221000463A4FC33069471B16A4B31F088892D2B1
+:10222000958843E68771FDB16198E351DC27365408
+:102230004CE438FAD07F4BBFDB37D7EA441CD530AB
+:10224000D9B106EF551A7EE1E0F15714B99FE75175
+:10225000499F86B9F2FC0D15319CF7E87C686874DB
+:102260008DC4FDD4CC31EEFF00DF4769F7730DC993
+:10227000D44FED134AC9821F619F4912DF19331DE4
+:10228000AC77C7164C7C74B783DD891FF74475B3F0
+:102290002307E5C5FF033C759D8B10370000000048
+:1022A0000000000000000000050207000000000020
+:00000001FF
diff --git a/fs/afs/cache.h b/fs/afs/cache.h
deleted file mode 100644
index 5c4f6b4..0000000
--- a/fs/afs/cache.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* AFS local cache management interface
- *
- * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved.
- * Written by David Howells (dhowells@redhat.com)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/fscache.h>
diff --git a/fs/afs/internal.h b/fs/afs/internal.h
index 106be66..6ece2a1 100644
--- a/fs/afs/internal.h
+++ b/fs/afs/internal.h
@@ -18,10 +18,10 @@
 #include <linux/key.h>
 #include <linux/workqueue.h>
 #include <linux/sched.h>
+#include <linux/fscache.h>
 
 #include "afs.h"
 #include "afs_vl.h"
-#include "cache.h"
 
 #define AFS_CELL_MAX_ADDRS 15
 
diff --git a/fs/anon_inodes.c b/fs/anon_inodes.c
index d11c51f..2ca7a7c 100644
--- a/fs/anon_inodes.c
+++ b/fs/anon_inodes.c
@@ -8,8 +8,10 @@
  *
  */
 
+#include <linux/cred.h>
 #include <linux/file.h>
 #include <linux/poll.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/init.h>
 #include <linux/fs.h>
diff --git a/fs/bio.c b/fs/bio.c
index 7673800..402cb84 100644
--- a/fs/bio.c
+++ b/fs/bio.c
@@ -249,6 +249,7 @@
 
 	mempool_free(p, bs->bio_pool);
 }
+EXPORT_SYMBOL(bio_free);
 
 void bio_init(struct bio *bio)
 {
@@ -257,6 +258,7 @@
 	bio->bi_comp_cpu = -1;
 	atomic_set(&bio->bi_cnt, 1);
 }
+EXPORT_SYMBOL(bio_init);
 
 /**
  * bio_alloc_bioset - allocate a bio for I/O
@@ -311,6 +313,7 @@
 	mempool_free(p, bs->bio_pool);
 	return NULL;
 }
+EXPORT_SYMBOL(bio_alloc_bioset);
 
 static void bio_fs_destructor(struct bio *bio)
 {
@@ -337,6 +340,7 @@
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_alloc);
 
 static void bio_kmalloc_destructor(struct bio *bio)
 {
@@ -380,6 +384,7 @@
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_kmalloc);
 
 void zero_fill_bio(struct bio *bio)
 {
@@ -416,6 +421,7 @@
 		bio->bi_destructor(bio);
 	}
 }
+EXPORT_SYMBOL(bio_put);
 
 inline int bio_phys_segments(struct request_queue *q, struct bio *bio)
 {
@@ -424,6 +430,7 @@
 
 	return bio->bi_phys_segments;
 }
+EXPORT_SYMBOL(bio_phys_segments);
 
 /**
  * 	__bio_clone	-	clone a bio
@@ -451,6 +458,7 @@
 	bio->bi_size = bio_src->bi_size;
 	bio->bi_idx = bio_src->bi_idx;
 }
+EXPORT_SYMBOL(__bio_clone);
 
 /**
  *	bio_clone	-	clone a bio
@@ -482,6 +490,7 @@
 
 	return b;
 }
+EXPORT_SYMBOL(bio_clone);
 
 /**
  *	bio_get_nr_vecs		- return approx number of vecs
@@ -505,6 +514,7 @@
 
 	return nr_pages;
 }
+EXPORT_SYMBOL(bio_get_nr_vecs);
 
 static int __bio_add_page(struct request_queue *q, struct bio *bio, struct page
 			  *page, unsigned int len, unsigned int offset,
@@ -635,6 +645,7 @@
 	return __bio_add_page(q, bio, page, len, offset,
 			      queue_max_hw_sectors(q));
 }
+EXPORT_SYMBOL(bio_add_pc_page);
 
 /**
  *	bio_add_page	-	attempt to add page to bio
@@ -655,6 +666,7 @@
 	struct request_queue *q = bdev_get_queue(bio->bi_bdev);
 	return __bio_add_page(q, bio, page, len, offset, queue_max_sectors(q));
 }
+EXPORT_SYMBOL(bio_add_page);
 
 struct bio_map_data {
 	struct bio_vec *iovecs;
@@ -776,6 +788,7 @@
 	bio_put(bio);
 	return ret;
 }
+EXPORT_SYMBOL(bio_uncopy_user);
 
 /**
  *	bio_copy_user_iov	-	copy user data to bio
@@ -920,6 +933,7 @@
 
 	return bio_copy_user_iov(q, map_data, &iov, 1, write_to_vm, gfp_mask);
 }
+EXPORT_SYMBOL(bio_copy_user);
 
 static struct bio *__bio_map_user_iov(struct request_queue *q,
 				      struct block_device *bdev,
@@ -1050,6 +1064,7 @@
 
 	return bio_map_user_iov(q, bdev, &iov, 1, write_to_vm, gfp_mask);
 }
+EXPORT_SYMBOL(bio_map_user);
 
 /**
  *	bio_map_user_iov - map user sg_iovec table into bio
@@ -1117,13 +1132,13 @@
 	__bio_unmap_user(bio);
 	bio_put(bio);
 }
+EXPORT_SYMBOL(bio_unmap_user);
 
 static void bio_map_kern_endio(struct bio *bio, int err)
 {
 	bio_put(bio);
 }
 
-
 static struct bio *__bio_map_kern(struct request_queue *q, void *data,
 				  unsigned int len, gfp_t gfp_mask)
 {
@@ -1189,6 +1204,7 @@
 	bio_put(bio);
 	return ERR_PTR(-EINVAL);
 }
+EXPORT_SYMBOL(bio_map_kern);
 
 static void bio_copy_kern_endio(struct bio *bio, int err)
 {
@@ -1250,6 +1266,7 @@
 
 	return bio;
 }
+EXPORT_SYMBOL(bio_copy_kern);
 
 /*
  * bio_set_pages_dirty() and bio_check_pages_dirty() are support functions
@@ -1400,6 +1417,7 @@
 	if (bio->bi_end_io)
 		bio->bi_end_io(bio, error);
 }
+EXPORT_SYMBOL(bio_endio);
 
 void bio_pair_release(struct bio_pair *bp)
 {
@@ -1410,6 +1428,7 @@
 		mempool_free(bp, bp->bio2.bi_private);
 	}
 }
+EXPORT_SYMBOL(bio_pair_release);
 
 static void bio_pair_end_1(struct bio *bi, int err)
 {
@@ -1477,6 +1496,7 @@
 
 	return bp;
 }
+EXPORT_SYMBOL(bio_split);
 
 /**
  *      bio_sector_offset - Find hardware sector offset in bio
@@ -1547,6 +1567,7 @@
 
 	kfree(bs);
 }
+EXPORT_SYMBOL(bioset_free);
 
 /**
  * bioset_create  - Create a bio_set
@@ -1592,6 +1613,7 @@
 	bioset_free(bs);
 	return NULL;
 }
+EXPORT_SYMBOL(bioset_create);
 
 static void __init biovec_init_slabs(void)
 {
@@ -1636,29 +1658,4 @@
 
 	return 0;
 }
-
 subsys_initcall(init_bio);
-
-EXPORT_SYMBOL(bio_alloc);
-EXPORT_SYMBOL(bio_kmalloc);
-EXPORT_SYMBOL(bio_put);
-EXPORT_SYMBOL(bio_free);
-EXPORT_SYMBOL(bio_endio);
-EXPORT_SYMBOL(bio_init);
-EXPORT_SYMBOL(__bio_clone);
-EXPORT_SYMBOL(bio_clone);
-EXPORT_SYMBOL(bio_phys_segments);
-EXPORT_SYMBOL(bio_add_page);
-EXPORT_SYMBOL(bio_add_pc_page);
-EXPORT_SYMBOL(bio_get_nr_vecs);
-EXPORT_SYMBOL(bio_map_user);
-EXPORT_SYMBOL(bio_unmap_user);
-EXPORT_SYMBOL(bio_map_kern);
-EXPORT_SYMBOL(bio_copy_kern);
-EXPORT_SYMBOL(bio_pair_release);
-EXPORT_SYMBOL(bio_split);
-EXPORT_SYMBOL(bio_copy_user);
-EXPORT_SYMBOL(bio_uncopy_user);
-EXPORT_SYMBOL(bioset_create);
-EXPORT_SYMBOL(bioset_free);
-EXPORT_SYMBOL(bio_alloc_bioset);
diff --git a/fs/btrfs/acl.c b/fs/btrfs/acl.c
index f128427..69b355a 100644
--- a/fs/btrfs/acl.c
+++ b/fs/btrfs/acl.c
@@ -27,7 +27,7 @@
 #include "btrfs_inode.h"
 #include "xattr.h"
 
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_POSIX_ACL
 
 static struct posix_acl *btrfs_get_acl(struct inode *inode, int type)
 {
@@ -313,7 +313,7 @@
 	.set	= btrfs_xattr_acl_access_set,
 };
 
-#else /* CONFIG_FS_POSIX_ACL */
+#else /* CONFIG_BTRFS_POSIX_ACL */
 
 int btrfs_acl_chmod(struct inode *inode)
 {
@@ -325,4 +325,4 @@
 	return 0;
 }
 
-#endif /* CONFIG_FS_POSIX_ACL */
+#endif /* CONFIG_BTRFS_POSIX_ACL */
diff --git a/fs/btrfs/btrfs_inode.h b/fs/btrfs/btrfs_inode.h
index 82ee56b..a54d354 100644
--- a/fs/btrfs/btrfs_inode.h
+++ b/fs/btrfs/btrfs_inode.h
@@ -128,6 +128,14 @@
 	u64 last_unlink_trans;
 
 	/*
+	 * These two counters are for delalloc metadata reservations.  We keep
+	 * track of how many extents we've accounted for vs how many extents we
+	 * have.
+	 */
+	int delalloc_reserved_extents;
+	int delalloc_extents;
+
+	/*
 	 * ordered_data_close is set by truncate when a file that used
 	 * to have good data has been truncated to zero.  When it is set
 	 * the btrfs file release call will add this inode to the
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 80599b4..dd8ced9 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -675,18 +675,19 @@
 				   current allocations */
 	u64 bytes_readonly;	/* total bytes that are read only */
 	u64 bytes_super;	/* total bytes reserved for the super blocks */
-
-	/* delalloc accounting */
-	u64 bytes_delalloc;	/* number of bytes reserved for allocation,
-				   this space is not necessarily reserved yet
-				   by the allocator */
+	u64 bytes_root;		/* the number of bytes needed to commit a
+				   transaction */
 	u64 bytes_may_use;	/* number of bytes that may be used for
-				   delalloc */
+				   delalloc/allocations */
+	u64 bytes_delalloc;	/* number of bytes currently reserved for
+				   delayed allocation */
 
 	int full;		/* indicates that we cannot allocate any more
 				   chunks for this space */
 	int force_alloc;	/* set if we need to force a chunk alloc for
 				   this space */
+	int force_delalloc;	/* make people start doing filemap_flush until
+				   we're under a threshold */
 
 	struct list_head list;
 
@@ -695,6 +696,9 @@
 	spinlock_t lock;
 	struct rw_semaphore groups_sem;
 	atomic_t caching_threads;
+
+	int allocating_chunk;
+	wait_queue_head_t wait;
 };
 
 /*
@@ -2022,7 +2026,12 @@
 void btrfs_set_inode_space_info(struct btrfs_root *root, struct inode *ionde);
 void btrfs_clear_space_info_full(struct btrfs_fs_info *info);
 
-int btrfs_check_metadata_free_space(struct btrfs_root *root);
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items);
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+					  struct inode *inode, int num_items);
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+					struct inode *inode, int num_items);
 int btrfs_check_data_free_space(struct btrfs_root *root, struct inode *inode,
 				u64 bytes);
 void btrfs_free_reserved_data_space(struct btrfs_root *root,
@@ -2326,7 +2335,7 @@
 int btrfs_drop_extent_cache(struct inode *inode, u64 start, u64 end,
 			    int skip_pinned);
 int btrfs_check_file(struct btrfs_root *root, struct inode *inode);
-extern struct file_operations btrfs_file_operations;
+extern const struct file_operations btrfs_file_operations;
 int btrfs_drop_extents(struct btrfs_trans_handle *trans,
 		       struct btrfs_root *root, struct inode *inode,
 		       u64 start, u64 end, u64 locked_end,
@@ -2357,7 +2366,7 @@
 int btrfs_sync_fs(struct super_block *sb, int wait);
 
 /* acl.c */
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_POSIX_ACL
 int btrfs_check_acl(struct inode *inode, int mask);
 #else
 #define btrfs_check_acl NULL
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 644e796..af0435f 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -822,14 +822,14 @@
 
 int btrfs_write_tree_block(struct extent_buffer *buf)
 {
-	return btrfs_fdatawrite_range(buf->first_page->mapping, buf->start,
-				      buf->start + buf->len - 1, WB_SYNC_ALL);
+	return filemap_fdatawrite_range(buf->first_page->mapping, buf->start,
+					buf->start + buf->len - 1);
 }
 
 int btrfs_wait_tree_block_writeback(struct extent_buffer *buf)
 {
-	return btrfs_wait_on_page_writeback_range(buf->first_page->mapping,
-				  buf->start, buf->start + buf->len - 1);
+	return filemap_fdatawait_range(buf->first_page->mapping,
+				       buf->start, buf->start + buf->len - 1);
 }
 
 struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
@@ -1630,7 +1630,7 @@
 	fs_info->sb = sb;
 	fs_info->max_extent = (u64)-1;
 	fs_info->max_inline = 8192 * 1024;
-	fs_info->metadata_ratio = 8;
+	fs_info->metadata_ratio = 0;
 
 	fs_info->thread_pool_size = min_t(unsigned long,
 					  num_online_cpus() + 2, 8);
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 993f93f..359a754 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -68,6 +68,8 @@
 			  struct extent_buffer **must_clean);
 static int find_next_key(struct btrfs_path *path, int level,
 			 struct btrfs_key *key);
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+			    int dump_block_groups);
 
 static noinline int
 block_group_cache_done(struct btrfs_block_group_cache *cache)
@@ -2765,67 +2767,346 @@
 						       alloc_target);
 }
 
+static u64 calculate_bytes_needed(struct btrfs_root *root, int num_items)
+{
+	u64 num_bytes;
+	int level;
+
+	level = BTRFS_MAX_LEVEL - 2;
+	/*
+	 * NOTE: these calculations are absolutely the worst possible case.
+	 * This assumes that _every_ item we insert will require a new leaf, and
+	 * that the tree has grown to its maximum level size.
+	 */
+
+	/*
+	 * for every item we insert we could insert both an extent item and a
+	 * extent ref item.  Then for ever item we insert, we will need to cow
+	 * both the original leaf, plus the leaf to the left and right of it.
+	 *
+	 * Unless we are talking about the extent root, then we just want the
+	 * number of items * 2, since we just need the extent item plus its ref.
+	 */
+	if (root == root->fs_info->extent_root)
+		num_bytes = num_items * 2;
+	else
+		num_bytes = (num_items + (2 * num_items)) * 3;
+
+	/*
+	 * num_bytes is total number of leaves we could need times the leaf
+	 * size, and then for every leaf we could end up cow'ing 2 nodes per
+	 * level, down to the leaf level.
+	 */
+	num_bytes = (num_bytes * root->leafsize) +
+		(num_bytes * (level * 2)) * root->nodesize;
+
+	return num_bytes;
+}
+
 /*
- * for now this just makes sure we have at least 5% of our metadata space free
- * for use.
+ * Unreserve metadata space for delalloc.  If we have less reserved credits than
+ * we have extents, this function does nothing.
  */
-int btrfs_check_metadata_free_space(struct btrfs_root *root)
+int btrfs_unreserve_metadata_for_delalloc(struct btrfs_root *root,
+					  struct inode *inode, int num_items)
 {
 	struct btrfs_fs_info *info = root->fs_info;
 	struct btrfs_space_info *meta_sinfo;
-	u64 alloc_target, thresh;
-	int committed = 0, ret;
+	u64 num_bytes;
+	u64 alloc_target;
+	bool bug = false;
 
 	/* get the space info for where the metadata will live */
 	alloc_target = btrfs_get_alloc_profile(root, 0);
 	meta_sinfo = __find_space_info(info, alloc_target);
-	if (!meta_sinfo)
-		goto alloc;
 
+	num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+					   num_items);
+
+	spin_lock(&meta_sinfo->lock);
+	if (BTRFS_I(inode)->delalloc_reserved_extents <=
+	    BTRFS_I(inode)->delalloc_extents) {
+		spin_unlock(&meta_sinfo->lock);
+		return 0;
+	}
+
+	BTRFS_I(inode)->delalloc_reserved_extents--;
+	BUG_ON(BTRFS_I(inode)->delalloc_reserved_extents < 0);
+
+	if (meta_sinfo->bytes_delalloc < num_bytes) {
+		bug = true;
+		meta_sinfo->bytes_delalloc = 0;
+	} else {
+		meta_sinfo->bytes_delalloc -= num_bytes;
+	}
+	spin_unlock(&meta_sinfo->lock);
+
+	BUG_ON(bug);
+
+	return 0;
+}
+
+static void check_force_delalloc(struct btrfs_space_info *meta_sinfo)
+{
+	u64 thresh;
+
+	thresh = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use;
+
+	thresh = meta_sinfo->total_bytes - thresh;
+	thresh *= 80;
+	do_div(thresh, 100);
+	if (thresh <= meta_sinfo->bytes_delalloc)
+		meta_sinfo->force_delalloc = 1;
+	else
+		meta_sinfo->force_delalloc = 0;
+}
+
+static int maybe_allocate_chunk(struct btrfs_root *root,
+				 struct btrfs_space_info *info)
+{
+	struct btrfs_super_block *disk_super = &root->fs_info->super_copy;
+	struct btrfs_trans_handle *trans;
+	bool wait = false;
+	int ret = 0;
+	u64 min_metadata;
+	u64 free_space;
+
+	free_space = btrfs_super_total_bytes(disk_super);
+	/*
+	 * we allow the metadata to grow to a max of either 5gb or 5% of the
+	 * space in the volume.
+	 */
+	min_metadata = min((u64)5 * 1024 * 1024 * 1024,
+			     div64_u64(free_space * 5, 100));
+	if (info->total_bytes >= min_metadata) {
+		spin_unlock(&info->lock);
+		return 0;
+	}
+
+	if (info->full) {
+		spin_unlock(&info->lock);
+		return 0;
+	}
+
+	if (!info->allocating_chunk) {
+		info->force_alloc = 1;
+		info->allocating_chunk = 1;
+		init_waitqueue_head(&info->wait);
+	} else {
+		wait = true;
+	}
+
+	spin_unlock(&info->lock);
+
+	if (wait) {
+		wait_event(info->wait,
+			   !info->allocating_chunk);
+		return 1;
+	}
+
+	trans = btrfs_start_transaction(root, 1);
+	if (!trans) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = do_chunk_alloc(trans, root->fs_info->extent_root,
+			     4096 + 2 * 1024 * 1024,
+			     info->flags, 0);
+	btrfs_end_transaction(trans, root);
+	if (ret)
+		goto out;
+out:
+	spin_lock(&info->lock);
+	info->allocating_chunk = 0;
+	spin_unlock(&info->lock);
+	wake_up(&info->wait);
+
+	if (ret)
+		return 0;
+	return 1;
+}
+
+/*
+ * Reserve metadata space for delalloc.
+ */
+int btrfs_reserve_metadata_for_delalloc(struct btrfs_root *root,
+					struct inode *inode, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 used;
+	u64 alloc_target;
+	int flushed = 0;
+	int force_delalloc;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root->fs_info->extent_root,
+					   num_items);
 again:
 	spin_lock(&meta_sinfo->lock);
-	if (!meta_sinfo->full)
-		thresh = meta_sinfo->total_bytes * 80;
-	else
-		thresh = meta_sinfo->total_bytes * 95;
 
-	do_div(thresh, 100);
+	force_delalloc = meta_sinfo->force_delalloc;
 
-	if (meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
-	    meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
-	    meta_sinfo->bytes_super > thresh) {
-		struct btrfs_trans_handle *trans;
-		if (!meta_sinfo->full) {
-			meta_sinfo->force_alloc = 1;
+	if (unlikely(!meta_sinfo->bytes_root))
+		meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+	if (!flushed)
+		meta_sinfo->bytes_delalloc += num_bytes;
+
+	used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+	if (used > meta_sinfo->total_bytes) {
+		flushed++;
+
+		if (flushed == 1) {
+			if (maybe_allocate_chunk(root, meta_sinfo))
+				goto again;
+			flushed++;
+		} else {
 			spin_unlock(&meta_sinfo->lock);
-alloc:
-			trans = btrfs_start_transaction(root, 1);
-			if (!trans)
-				return -ENOMEM;
+		}
 
-			ret = do_chunk_alloc(trans, root->fs_info->extent_root,
-					     2 * 1024 * 1024, alloc_target, 0);
-			btrfs_end_transaction(trans, root);
-			if (!meta_sinfo) {
-				meta_sinfo = __find_space_info(info,
-							       alloc_target);
-			}
+		if (flushed == 2) {
+			filemap_flush(inode->i_mapping);
+			goto again;
+		} else if (flushed == 3) {
+			btrfs_start_delalloc_inodes(root);
+			btrfs_wait_ordered_extents(root, 0);
 			goto again;
 		}
+		spin_lock(&meta_sinfo->lock);
+		meta_sinfo->bytes_delalloc -= num_bytes;
 		spin_unlock(&meta_sinfo->lock);
-
-		if (!committed) {
-			committed = 1;
-			trans = btrfs_join_transaction(root, 1);
-			if (!trans)
-				return -ENOMEM;
-			ret = btrfs_commit_transaction(trans, root);
-			if (ret)
-				return ret;
-			goto again;
-		}
+		printk(KERN_ERR "enospc, has %d, reserved %d\n",
+		       BTRFS_I(inode)->delalloc_extents,
+		       BTRFS_I(inode)->delalloc_reserved_extents);
+		dump_space_info(meta_sinfo, 0, 0);
 		return -ENOSPC;
 	}
+
+	BTRFS_I(inode)->delalloc_reserved_extents++;
+	check_force_delalloc(meta_sinfo);
+	spin_unlock(&meta_sinfo->lock);
+
+	if (!flushed && force_delalloc)
+		filemap_flush(inode->i_mapping);
+
+	return 0;
+}
+
+/*
+ * unreserve num_items number of items worth of metadata space.  This needs to
+ * be paired with btrfs_reserve_metadata_space.
+ *
+ * NOTE: if you have the option, run this _AFTER_ you do a
+ * btrfs_end_transaction, since btrfs_end_transaction will run delayed ref
+ * oprations which will result in more used metadata, so we want to make sure we
+ * can do that without issue.
+ */
+int btrfs_unreserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 alloc_target;
+	bool bug = false;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root, num_items);
+
+	spin_lock(&meta_sinfo->lock);
+	if (meta_sinfo->bytes_may_use < num_bytes) {
+		bug = true;
+		meta_sinfo->bytes_may_use = 0;
+	} else {
+		meta_sinfo->bytes_may_use -= num_bytes;
+	}
+	spin_unlock(&meta_sinfo->lock);
+
+	BUG_ON(bug);
+
+	return 0;
+}
+
+/*
+ * Reserve some metadata space for use.  We'll calculate the worste case number
+ * of bytes that would be needed to modify num_items number of items.  If we
+ * have space, fantastic, if not, you get -ENOSPC.  Please call
+ * btrfs_unreserve_metadata_space when you are done for the _SAME_ number of
+ * items you reserved, since whatever metadata you needed should have already
+ * been allocated.
+ *
+ * This will commit the transaction to make more space if we don't have enough
+ * metadata space.  THe only time we don't do this is if we're reserving space
+ * inside of a transaction, then we will just return -ENOSPC and it is the
+ * callers responsibility to handle it properly.
+ */
+int btrfs_reserve_metadata_space(struct btrfs_root *root, int num_items)
+{
+	struct btrfs_fs_info *info = root->fs_info;
+	struct btrfs_space_info *meta_sinfo;
+	u64 num_bytes;
+	u64 used;
+	u64 alloc_target;
+	int retries = 0;
+
+	/* get the space info for where the metadata will live */
+	alloc_target = btrfs_get_alloc_profile(root, 0);
+	meta_sinfo = __find_space_info(info, alloc_target);
+
+	num_bytes = calculate_bytes_needed(root, num_items);
+again:
+	spin_lock(&meta_sinfo->lock);
+
+	if (unlikely(!meta_sinfo->bytes_root))
+		meta_sinfo->bytes_root = calculate_bytes_needed(root, 6);
+
+	if (!retries)
+		meta_sinfo->bytes_may_use += num_bytes;
+
+	used = meta_sinfo->bytes_used + meta_sinfo->bytes_reserved +
+		meta_sinfo->bytes_pinned + meta_sinfo->bytes_readonly +
+		meta_sinfo->bytes_super + meta_sinfo->bytes_root +
+		meta_sinfo->bytes_may_use + meta_sinfo->bytes_delalloc;
+
+	if (used > meta_sinfo->total_bytes) {
+		retries++;
+		if (retries == 1) {
+			if (maybe_allocate_chunk(root, meta_sinfo))
+				goto again;
+			retries++;
+		} else {
+			spin_unlock(&meta_sinfo->lock);
+		}
+
+		if (retries == 2) {
+			btrfs_start_delalloc_inodes(root);
+			btrfs_wait_ordered_extents(root, 0);
+			goto again;
+		}
+		spin_lock(&meta_sinfo->lock);
+		meta_sinfo->bytes_may_use -= num_bytes;
+		spin_unlock(&meta_sinfo->lock);
+
+		dump_space_info(meta_sinfo, 0, 0);
+		return -ENOSPC;
+	}
+
+	check_force_delalloc(meta_sinfo);
 	spin_unlock(&meta_sinfo->lock);
 
 	return 0;
@@ -2888,7 +3169,7 @@
 		spin_unlock(&data_sinfo->lock);
 
 		/* commit the current transaction and try again */
-		if (!committed) {
+		if (!committed && !root->fs_info->open_ioctl_trans) {
 			committed = 1;
 			trans = btrfs_join_transaction(root, 1);
 			if (!trans)
@@ -2916,7 +3197,7 @@
 	BTRFS_I(inode)->reserved_bytes += bytes;
 	spin_unlock(&data_sinfo->lock);
 
-	return btrfs_check_metadata_free_space(root);
+	return 0;
 }
 
 /*
@@ -3015,17 +3296,15 @@
 	BUG_ON(!space_info);
 
 	spin_lock(&space_info->lock);
-	if (space_info->force_alloc) {
+	if (space_info->force_alloc)
 		force = 1;
-		space_info->force_alloc = 0;
-	}
 	if (space_info->full) {
 		spin_unlock(&space_info->lock);
 		goto out;
 	}
 
 	thresh = space_info->total_bytes - space_info->bytes_readonly;
-	thresh = div_factor(thresh, 6);
+	thresh = div_factor(thresh, 8);
 	if (!force &&
 	   (space_info->bytes_used + space_info->bytes_pinned +
 	    space_info->bytes_reserved + alloc_bytes) < thresh) {
@@ -3039,7 +3318,7 @@
 	 * we keep a reasonable number of metadata chunks allocated in the
 	 * FS as well.
 	 */
-	if (flags & BTRFS_BLOCK_GROUP_DATA) {
+	if (flags & BTRFS_BLOCK_GROUP_DATA && fs_info->metadata_ratio) {
 		fs_info->data_chunk_allocations++;
 		if (!(fs_info->data_chunk_allocations %
 		      fs_info->metadata_ratio))
@@ -3047,8 +3326,11 @@
 	}
 
 	ret = btrfs_alloc_chunk(trans, extent_root, flags);
+	spin_lock(&space_info->lock);
 	if (ret)
 		space_info->full = 1;
+	space_info->force_alloc = 0;
+	spin_unlock(&space_info->lock);
 out:
 	mutex_unlock(&extent_root->fs_info->chunk_mutex);
 	return ret;
@@ -4063,21 +4345,32 @@
 	return ret;
 }
 
-static void dump_space_info(struct btrfs_space_info *info, u64 bytes)
+static void dump_space_info(struct btrfs_space_info *info, u64 bytes,
+			    int dump_block_groups)
 {
 	struct btrfs_block_group_cache *cache;
 
+	spin_lock(&info->lock);
 	printk(KERN_INFO "space_info has %llu free, is %sfull\n",
 	       (unsigned long long)(info->total_bytes - info->bytes_used -
-				    info->bytes_pinned - info->bytes_reserved),
+				    info->bytes_pinned - info->bytes_reserved -
+				    info->bytes_super),
 	       (info->full) ? "" : "not ");
 	printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
-	       " may_use=%llu, used=%llu\n",
+	       " may_use=%llu, used=%llu, root=%llu, super=%llu, reserved=%llu"
+	       "\n",
 	       (unsigned long long)info->total_bytes,
 	       (unsigned long long)info->bytes_pinned,
 	       (unsigned long long)info->bytes_delalloc,
 	       (unsigned long long)info->bytes_may_use,
-	       (unsigned long long)info->bytes_used);
+	       (unsigned long long)info->bytes_used,
+	       (unsigned long long)info->bytes_root,
+	       (unsigned long long)info->bytes_super,
+	       (unsigned long long)info->bytes_reserved);
+	spin_unlock(&info->lock);
+
+	if (!dump_block_groups)
+		return;
 
 	down_read(&info->groups_sem);
 	list_for_each_entry(cache, &info->block_groups, list) {
@@ -4145,7 +4438,7 @@
 		printk(KERN_ERR "btrfs allocation failed flags %llu, "
 		       "wanted %llu\n", (unsigned long long)data,
 		       (unsigned long long)num_bytes);
-		dump_space_info(sinfo, num_bytes);
+		dump_space_info(sinfo, num_bytes, 1);
 	}
 
 	return ret;
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 0cb88f8..de1793b 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -280,6 +280,14 @@
 	return NULL;
 }
 
+static void merge_cb(struct extent_io_tree *tree, struct extent_state *new,
+		     struct extent_state *other)
+{
+	if (tree->ops && tree->ops->merge_extent_hook)
+		tree->ops->merge_extent_hook(tree->mapping->host, new,
+					     other);
+}
+
 /*
  * utility function to look for merge candidates inside a given range.
  * Any extents with matching state are merged together into a single
@@ -303,6 +311,7 @@
 		other = rb_entry(other_node, struct extent_state, rb_node);
 		if (other->end == state->start - 1 &&
 		    other->state == state->state) {
+			merge_cb(tree, state, other);
 			state->start = other->start;
 			other->tree = NULL;
 			rb_erase(&other->rb_node, &tree->state);
@@ -314,33 +323,37 @@
 		other = rb_entry(other_node, struct extent_state, rb_node);
 		if (other->start == state->end + 1 &&
 		    other->state == state->state) {
+			merge_cb(tree, state, other);
 			other->start = state->start;
 			state->tree = NULL;
 			rb_erase(&state->rb_node, &tree->state);
 			free_extent_state(state);
+			state = NULL;
 		}
 	}
+
 	return 0;
 }
 
-static void set_state_cb(struct extent_io_tree *tree,
+static int set_state_cb(struct extent_io_tree *tree,
 			 struct extent_state *state,
 			 unsigned long bits)
 {
 	if (tree->ops && tree->ops->set_bit_hook) {
-		tree->ops->set_bit_hook(tree->mapping->host, state->start,
-					state->end, state->state, bits);
+		return tree->ops->set_bit_hook(tree->mapping->host,
+					       state->start, state->end,
+					       state->state, bits);
 	}
+
+	return 0;
 }
 
 static void clear_state_cb(struct extent_io_tree *tree,
 			   struct extent_state *state,
 			   unsigned long bits)
 {
-	if (tree->ops && tree->ops->clear_bit_hook) {
-		tree->ops->clear_bit_hook(tree->mapping->host, state->start,
-					  state->end, state->state, bits);
-	}
+	if (tree->ops && tree->ops->clear_bit_hook)
+		tree->ops->clear_bit_hook(tree->mapping->host, state, bits);
 }
 
 /*
@@ -358,6 +371,7 @@
 			int bits)
 {
 	struct rb_node *node;
+	int ret;
 
 	if (end < start) {
 		printk(KERN_ERR "btrfs end < start %llu %llu\n",
@@ -365,11 +379,14 @@
 		       (unsigned long long)start);
 		WARN_ON(1);
 	}
-	if (bits & EXTENT_DIRTY)
-		tree->dirty_bytes += end - start + 1;
 	state->start = start;
 	state->end = end;
-	set_state_cb(tree, state, bits);
+	ret = set_state_cb(tree, state, bits);
+	if (ret)
+		return ret;
+
+	if (bits & EXTENT_DIRTY)
+		tree->dirty_bytes += end - start + 1;
 	state->state |= bits;
 	node = tree_insert(&tree->state, end, &state->rb_node);
 	if (node) {
@@ -387,6 +404,15 @@
 	return 0;
 }
 
+static int split_cb(struct extent_io_tree *tree, struct extent_state *orig,
+		     u64 split)
+{
+	if (tree->ops && tree->ops->split_extent_hook)
+		return tree->ops->split_extent_hook(tree->mapping->host,
+						    orig, split);
+	return 0;
+}
+
 /*
  * split a given extent state struct in two, inserting the preallocated
  * struct 'prealloc' as the newly created second half.  'split' indicates an
@@ -405,6 +431,9 @@
 		       struct extent_state *prealloc, u64 split)
 {
 	struct rb_node *node;
+
+	split_cb(tree, orig, split);
+
 	prealloc->start = orig->start;
 	prealloc->end = split - 1;
 	prealloc->state = orig->state;
@@ -542,8 +571,8 @@
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			set |= clear_state_bit(tree, state, bits,
-					wake, delete);
+			set |= clear_state_bit(tree, state, bits, wake,
+					       delete);
 			if (last_end == (u64)-1)
 				goto out;
 			start = last_end + 1;
@@ -561,12 +590,11 @@
 			prealloc = alloc_extent_state(GFP_ATOMIC);
 		err = split_state(tree, state, prealloc, end + 1);
 		BUG_ON(err == -EEXIST);
-
 		if (wake)
 			wake_up(&state->wq);
 
-		set |= clear_state_bit(tree, prealloc, bits,
-				       wake, delete);
+		set |= clear_state_bit(tree, prealloc, bits, wake, delete);
+
 		prealloc = NULL;
 		goto out;
 	}
@@ -667,16 +695,23 @@
 	return 0;
 }
 
-static void set_state_bits(struct extent_io_tree *tree,
+static int set_state_bits(struct extent_io_tree *tree,
 			   struct extent_state *state,
 			   int bits)
 {
+	int ret;
+
+	ret = set_state_cb(tree, state, bits);
+	if (ret)
+		return ret;
+
 	if ((bits & EXTENT_DIRTY) && !(state->state & EXTENT_DIRTY)) {
 		u64 range = state->end - state->start + 1;
 		tree->dirty_bytes += range;
 	}
-	set_state_cb(tree, state, bits);
 	state->state |= bits;
+
+	return 0;
 }
 
 static void cache_state(struct extent_state *state,
@@ -758,7 +793,10 @@
 			goto out;
 		}
 
-		set_state_bits(tree, state, bits);
+		err = set_state_bits(tree, state, bits);
+		if (err)
+			goto out;
+
 		cache_state(state, cached_state);
 		merge_state(tree, state);
 		if (last_end == (u64)-1)
@@ -805,7 +843,9 @@
 		if (err)
 			goto out;
 		if (state->end <= end) {
-			set_state_bits(tree, state, bits);
+			err = set_state_bits(tree, state, bits);
+			if (err)
+				goto out;
 			cache_state(state, cached_state);
 			merge_state(tree, state);
 			if (last_end == (u64)-1)
@@ -829,11 +869,13 @@
 			this_end = last_start - 1;
 		err = insert_state(tree, prealloc, start, this_end,
 				   bits);
+		BUG_ON(err == -EEXIST);
+		if (err) {
+			prealloc = NULL;
+			goto out;
+		}
 		cache_state(prealloc, cached_state);
 		prealloc = NULL;
-		BUG_ON(err == -EEXIST);
-		if (err)
-			goto out;
 		start = this_end + 1;
 		goto search_again;
 	}
@@ -852,7 +894,11 @@
 		err = split_state(tree, state, prealloc, end + 1);
 		BUG_ON(err == -EEXIST);
 
-		set_state_bits(tree, prealloc, bits);
+		err = set_state_bits(tree, prealloc, bits);
+		if (err) {
+			prealloc = NULL;
+			goto out;
+		}
 		cache_state(prealloc, cached_state);
 		merge_state(tree, prealloc);
 		prealloc = NULL;
diff --git a/fs/btrfs/extent_io.h b/fs/btrfs/extent_io.h
index 14ed16f..4794ec8 100644
--- a/fs/btrfs/extent_io.h
+++ b/fs/btrfs/extent_io.h
@@ -60,8 +60,13 @@
 				      struct extent_state *state, int uptodate);
 	int (*set_bit_hook)(struct inode *inode, u64 start, u64 end,
 			    unsigned long old, unsigned long bits);
-	int (*clear_bit_hook)(struct inode *inode, u64 start, u64 end,
-			    unsigned long old, unsigned long bits);
+	int (*clear_bit_hook)(struct inode *inode, struct extent_state *state,
+			      unsigned long bits);
+	int (*merge_extent_hook)(struct inode *inode,
+				 struct extent_state *new,
+				 struct extent_state *other);
+	int (*split_extent_hook)(struct inode *inode,
+				 struct extent_state *orig, u64 split);
 	int (*write_cache_pages_lock_hook)(struct page *page);
 };
 
@@ -79,10 +84,14 @@
 	u64 start;
 	u64 end; /* inclusive */
 	struct rb_node rb_node;
+
+	/* ADD NEW ELEMENTS AFTER THIS */
 	struct extent_io_tree *tree;
 	wait_queue_head_t wq;
 	atomic_t refs;
 	unsigned long state;
+	u64 split_start;
+	u64 split_end;
 
 	/* for use by the FS */
 	u64 private;
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 571ad3c..f19e125 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -123,7 +123,10 @@
 		    root->sectorsize - 1) & ~((u64)root->sectorsize - 1);
 
 	end_of_last_block = start_pos + num_bytes - 1;
-	btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+	err = btrfs_set_extent_delalloc(inode, start_pos, end_of_last_block);
+	if (err)
+		return err;
+
 	for (i = 0; i < num_pages; i++) {
 		struct page *p = pages[i];
 		SetPageUptodate(p);
@@ -917,21 +920,35 @@
 	start_pos = pos;
 
 	vfs_check_frozen(inode->i_sb, SB_FREEZE_WRITE);
+
+	/* do the reserve before the mutex lock in case we have to do some
+	 * flushing.  We wouldn't deadlock, but this is more polite.
+	 */
+	err = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+	if (err)
+		goto out_nolock;
+
+	mutex_lock(&inode->i_mutex);
+
 	current->backing_dev_info = inode->i_mapping->backing_dev_info;
 	err = generic_write_checks(file, &pos, &count, S_ISBLK(inode->i_mode));
 	if (err)
-		goto out_nolock;
+		goto out;
+
 	if (count == 0)
-		goto out_nolock;
+		goto out;
 
 	err = file_remove_suid(file);
 	if (err)
-		goto out_nolock;
+		goto out;
+
 	file_update_time(file);
 
 	pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL);
 
-	mutex_lock(&inode->i_mutex);
+	/* generic_write_checks can change our pos */
+	start_pos = pos;
+
 	BTRFS_I(inode)->sequence++;
 	first_index = pos >> PAGE_CACHE_SHIFT;
 	last_index = (pos + count) >> PAGE_CACHE_SHIFT;
@@ -1005,9 +1022,8 @@
 		}
 
 		if (will_write) {
-			btrfs_fdatawrite_range(inode->i_mapping, pos,
-					       pos + write_bytes - 1,
-					       WB_SYNC_ALL);
+			filemap_fdatawrite_range(inode->i_mapping, pos,
+						 pos + write_bytes - 1);
 		} else {
 			balance_dirty_pages_ratelimited_nr(inode->i_mapping,
 							   num_pages);
@@ -1028,6 +1044,7 @@
 	mutex_unlock(&inode->i_mutex);
 	if (ret)
 		err = ret;
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 
 out_nolock:
 	kfree(pages);
@@ -1184,7 +1201,7 @@
 	return ret > 0 ? EIO : ret;
 }
 
-static struct vm_operations_struct btrfs_file_vm_ops = {
+static const struct vm_operations_struct btrfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= btrfs_page_mkwrite,
 };
@@ -1196,7 +1213,7 @@
 	return 0;
 }
 
-struct file_operations btrfs_file_operations = {
+const struct file_operations btrfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
 	.aio_read       = generic_file_aio_read,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index e9b76bc..112e5aa 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -62,7 +62,7 @@
 static const struct inode_operations btrfs_file_inode_operations;
 static const struct address_space_operations btrfs_aops;
 static const struct address_space_operations btrfs_symlink_aops;
-static struct file_operations btrfs_dir_file_operations;
+static const struct file_operations btrfs_dir_file_operations;
 static struct extent_io_ops btrfs_extent_io_ops;
 
 static struct kmem_cache *btrfs_inode_cachep;
@@ -1159,6 +1159,83 @@
 	return ret;
 }
 
+static int btrfs_split_extent_hook(struct inode *inode,
+				    struct extent_state *orig, u64 split)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	u64 size;
+
+	if (!(orig->state & EXTENT_DELALLOC))
+		return 0;
+
+	size = orig->end - orig->start + 1;
+	if (size > root->fs_info->max_extent) {
+		u64 num_extents;
+		u64 new_size;
+
+		new_size = orig->end - split + 1;
+		num_extents = div64_u64(size + root->fs_info->max_extent - 1,
+					root->fs_info->max_extent);
+
+		/*
+		 * if we break a large extent up then leave delalloc_extents be,
+		 * since we've already accounted for the large extent.
+		 */
+		if (div64_u64(new_size + root->fs_info->max_extent - 1,
+			      root->fs_info->max_extent) < num_extents)
+			return 0;
+	}
+
+	BTRFS_I(inode)->delalloc_extents++;
+
+	return 0;
+}
+
+/*
+ * extent_io.c merge_extent_hook, used to track merged delayed allocation
+ * extents so we can keep track of new extents that are just merged onto old
+ * extents, such as when we are doing sequential writes, so we can properly
+ * account for the metadata space we'll need.
+ */
+static int btrfs_merge_extent_hook(struct inode *inode,
+				   struct extent_state *new,
+				   struct extent_state *other)
+{
+	struct btrfs_root *root = BTRFS_I(inode)->root;
+	u64 new_size, old_size;
+	u64 num_extents;
+
+	/* not delalloc, ignore it */
+	if (!(other->state & EXTENT_DELALLOC))
+		return 0;
+
+	old_size = other->end - other->start + 1;
+	if (new->start < other->start)
+		new_size = other->end - new->start + 1;
+	else
+		new_size = new->end - other->start + 1;
+
+	/* we're not bigger than the max, unreserve the space and go */
+	if (new_size <= root->fs_info->max_extent) {
+		BTRFS_I(inode)->delalloc_extents--;
+		return 0;
+	}
+
+	/*
+	 * If we grew by another max_extent, just return, we want to keep that
+	 * reserved amount.
+	 */
+	num_extents = div64_u64(old_size + root->fs_info->max_extent - 1,
+				root->fs_info->max_extent);
+	if (div64_u64(new_size + root->fs_info->max_extent - 1,
+		      root->fs_info->max_extent) > num_extents)
+		return 0;
+
+	BTRFS_I(inode)->delalloc_extents--;
+
+	return 0;
+}
+
 /*
  * extent_io.c set_bit_hook, used to track delayed allocation
  * bytes in this file, and to maintain the list of inodes that
@@ -1167,6 +1244,7 @@
 static int btrfs_set_bit_hook(struct inode *inode, u64 start, u64 end,
 		       unsigned long old, unsigned long bits)
 {
+
 	/*
 	 * set_bit and clear bit hooks normally require _irqsave/restore
 	 * but in this case, we are only testeing for the DELALLOC
@@ -1174,6 +1252,8 @@
 	 */
 	if (!(old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
 		struct btrfs_root *root = BTRFS_I(inode)->root;
+
+		BTRFS_I(inode)->delalloc_extents++;
 		btrfs_delalloc_reserve_space(root, inode, end - start + 1);
 		spin_lock(&root->fs_info->delalloc_lock);
 		BTRFS_I(inode)->delalloc_bytes += end - start + 1;
@@ -1190,22 +1270,27 @@
 /*
  * extent_io.c clear_bit_hook, see set_bit_hook for why
  */
-static int btrfs_clear_bit_hook(struct inode *inode, u64 start, u64 end,
-			 unsigned long old, unsigned long bits)
+static int btrfs_clear_bit_hook(struct inode *inode,
+				struct extent_state *state, unsigned long bits)
 {
 	/*
 	 * set_bit and clear bit hooks normally require _irqsave/restore
 	 * but in this case, we are only testeing for the DELALLOC
 	 * bit, which is only set or cleared with irqs on
 	 */
-	if ((old & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
+	if ((state->state & EXTENT_DELALLOC) && (bits & EXTENT_DELALLOC)) {
 		struct btrfs_root *root = BTRFS_I(inode)->root;
 
+		BTRFS_I(inode)->delalloc_extents--;
+		btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
+
 		spin_lock(&root->fs_info->delalloc_lock);
-		if (end - start + 1 > root->fs_info->delalloc_bytes) {
+		if (state->end - state->start + 1 >
+		    root->fs_info->delalloc_bytes) {
 			printk(KERN_INFO "btrfs warning: delalloc account "
 			       "%llu %llu\n",
-			       (unsigned long long)end - start + 1,
+			       (unsigned long long)
+			       state->end - state->start + 1,
 			       (unsigned long long)
 			       root->fs_info->delalloc_bytes);
 			btrfs_delalloc_free_space(root, inode, (u64)-1);
@@ -1213,9 +1298,12 @@
 			BTRFS_I(inode)->delalloc_bytes = 0;
 		} else {
 			btrfs_delalloc_free_space(root, inode,
-						  end - start + 1);
-			root->fs_info->delalloc_bytes -= end - start + 1;
-			BTRFS_I(inode)->delalloc_bytes -= end - start + 1;
+						  state->end -
+						  state->start + 1);
+			root->fs_info->delalloc_bytes -= state->end -
+				state->start + 1;
+			BTRFS_I(inode)->delalloc_bytes -= state->end -
+				state->start + 1;
 		}
 		if (BTRFS_I(inode)->delalloc_bytes == 0 &&
 		    !list_empty(&BTRFS_I(inode)->delalloc_inodes)) {
@@ -2950,7 +3038,12 @@
 		goto again;
 	}
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end);
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	if (ret) {
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		goto out_unlock;
+	}
+
 	ret = 0;
 	if (offset != PAGE_CACHE_SIZE) {
 		kaddr = kmap(page);
@@ -2981,15 +3074,11 @@
 	u64 last_byte;
 	u64 cur_offset;
 	u64 hole_size;
-	int err;
+	int err = 0;
 
 	if (size <= hole_start)
 		return 0;
 
-	err = btrfs_check_metadata_free_space(root);
-	if (err)
-		return err;
-
 	btrfs_truncate_page(inode->i_mapping, inode->i_size);
 
 	while (1) {
@@ -3024,12 +3113,18 @@
 						 cur_offset, &hint_byte, 1);
 			if (err)
 				break;
+
+			err = btrfs_reserve_metadata_space(root, 1);
+			if (err)
+				break;
+
 			err = btrfs_insert_file_extent(trans, root,
 					inode->i_ino, cur_offset, 0,
 					0, hole_size, 0, hole_size,
 					0, 0, 0);
 			btrfs_drop_extent_cache(inode, hole_start,
 					last_byte - 1, 0);
+			btrfs_unreserve_metadata_space(root, 1);
 		}
 		free_extent_map(em);
 		cur_offset = last_byte;
@@ -3990,11 +4085,18 @@
 	if (!new_valid_dev(rdev))
 		return -EINVAL;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 for inode item and ref
+	 * 2 for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto fail;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -4032,6 +4134,7 @@
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4052,10 +4155,18 @@
 	u64 objectid;
 	u64 index = 0;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 for inode item and ref
+	 * 2 for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto fail;
+		return err;
+
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -4096,6 +4207,7 @@
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4118,10 +4230,16 @@
 	if (inode->i_nlink == 0)
 		return -ENOENT;
 
-	btrfs_inc_nlink(inode);
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 item for inode ref
+	 * 2 items for dir items
+	 */
+	err = btrfs_reserve_metadata_space(root, 3);
 	if (err)
-		goto fail;
+		return err;
+
+	btrfs_inc_nlink(inode);
+
 	err = btrfs_set_inode_index(dir, &index);
 	if (err)
 		goto fail;
@@ -4145,6 +4263,7 @@
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 fail:
+	btrfs_unreserve_metadata_space(root, 3);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -4164,17 +4283,21 @@
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for inode and ref
+	 * 2 items for dir items
+	 * 1 for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto out_unlock;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
-	btrfs_set_trans_block_group(trans, dir);
-
-	if (IS_ERR(trans)) {
-		err = PTR_ERR(trans);
+	if (!trans) {
+		err = -ENOMEM;
 		goto out_unlock;
 	}
+	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
 	if (err) {
@@ -4223,6 +4346,7 @@
 	btrfs_end_transaction_throttle(trans, root);
 
 out_unlock:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_on_err)
 		iput(inode);
 	btrfs_btree_balance_dirty(root, nr);
@@ -4747,6 +4871,13 @@
 		goto out;
 	}
 
+	ret = btrfs_reserve_metadata_for_delalloc(root, inode, 1);
+	if (ret) {
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+		ret = VM_FAULT_SIGBUS;
+		goto out;
+	}
+
 	ret = VM_FAULT_NOPAGE; /* make the VM retry the fault */
 again:
 	lock_page(page);
@@ -4778,7 +4909,23 @@
 		goto again;
 	}
 
-	btrfs_set_extent_delalloc(inode, page_start, page_end);
+	/*
+	 * XXX - page_mkwrite gets called every time the page is dirtied, even
+	 * if it was already dirty, so for space accounting reasons we need to
+	 * clear any delalloc bits for the range we are fixing to save.  There
+	 * is probably a better way to do this, but for now keep consistent with
+	 * prepare_pages in the normal write path.
+	 */
+	clear_extent_bits(&BTRFS_I(inode)->io_tree, page_start, page_end,
+			  EXTENT_DIRTY | EXTENT_DELALLOC, GFP_NOFS);
+
+	ret = btrfs_set_extent_delalloc(inode, page_start, page_end);
+	if (ret) {
+		unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
+		ret = VM_FAULT_SIGBUS;
+		btrfs_free_reserved_data_space(root, inode, PAGE_CACHE_SIZE);
+		goto out_unlock;
+	}
 	ret = 0;
 
 	/* page is wholly or partially inside EOF */
@@ -4801,6 +4948,7 @@
 	unlock_extent(io_tree, page_start, page_end, GFP_NOFS);
 
 out_unlock:
+	btrfs_unreserve_metadata_for_delalloc(root, inode, 1);
 	if (!ret)
 		return VM_FAULT_LOCKED;
 	unlock_page(page);
@@ -4917,6 +5065,8 @@
 		return NULL;
 	ei->last_trans = 0;
 	ei->logged_trans = 0;
+	ei->delalloc_extents = 0;
+	ei->delalloc_reserved_extents = 0;
 	btrfs_ordered_inode_tree_init(&ei->ordered_tree);
 	INIT_LIST_HEAD(&ei->i_orphan);
 	INIT_LIST_HEAD(&ei->ordered_operations);
@@ -5070,7 +5220,12 @@
 	    new_inode->i_size > BTRFS_EMPTY_DIR_SIZE)
 		return -ENOTEMPTY;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for dir items
+	 * 1 item for orphan entry
+	 * 1 item for ref
+	 */
+	ret = btrfs_reserve_metadata_space(root, 4);
 	if (ret)
 		return ret;
 
@@ -5185,6 +5340,8 @@
 
 	if (old_inode->i_ino == BTRFS_FIRST_FREE_OBJECTID)
 		up_read(&root->fs_info->subvol_sem);
+
+	btrfs_unreserve_metadata_space(root, 4);
 	return ret;
 }
 
@@ -5256,11 +5413,18 @@
 	if (name_len > BTRFS_MAX_INLINE_DATA_SIZE(root))
 		return -ENAMETOOLONG;
 
-	err = btrfs_check_metadata_free_space(root);
+	/*
+	 * 2 items for inode item and ref
+	 * 2 items for dir items
+	 * 1 item for xattr if selinux is on
+	 */
+	err = btrfs_reserve_metadata_space(root, 5);
 	if (err)
-		goto out_fail;
+		return err;
 
 	trans = btrfs_start_transaction(root, 1);
+	if (!trans)
+		goto out_fail;
 	btrfs_set_trans_block_group(trans, dir);
 
 	err = btrfs_find_free_objectid(trans, root, dir->i_ino, &objectid);
@@ -5341,6 +5505,7 @@
 	nr = trans->blocks_used;
 	btrfs_end_transaction_throttle(trans, root);
 out_fail:
+	btrfs_unreserve_metadata_space(root, 5);
 	if (drop_inode) {
 		inode_dec_link_count(inode);
 		iput(inode);
@@ -5362,6 +5527,11 @@
 
 	while (num_bytes > 0) {
 		alloc_size = min(num_bytes, root->fs_info->max_extent);
+
+		ret = btrfs_reserve_metadata_space(root, 1);
+		if (ret)
+			goto out;
+
 		ret = btrfs_reserve_extent(trans, root, alloc_size,
 					   root->sectorsize, 0, alloc_hint,
 					   (u64)-1, &ins, 1);
@@ -5381,6 +5551,7 @@
 		num_bytes -= ins.offset;
 		cur_offset += ins.offset;
 		alloc_hint = ins.objectid + ins.offset;
+		btrfs_unreserve_metadata_space(root, 1);
 	}
 out:
 	if (cur_offset > start) {
@@ -5544,7 +5715,7 @@
 	.permission	= btrfs_permission,
 };
 
-static struct file_operations btrfs_dir_file_operations = {
+static const struct file_operations btrfs_dir_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= generic_read_dir,
 	.readdir	= btrfs_real_readdir,
@@ -5566,6 +5737,8 @@
 	.readpage_io_failed_hook = btrfs_io_failed_hook,
 	.set_bit_hook = btrfs_set_bit_hook,
 	.clear_bit_hook = btrfs_clear_bit_hook,
+	.merge_extent_hook = btrfs_merge_extent_hook,
+	.split_extent_hook = btrfs_split_extent_hook,
 };
 
 /*
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index a8577a7..9a780c8 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -239,7 +239,13 @@
 	u64 index = 0;
 	unsigned long nr = 1;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 - inode item
+	 * 2 - refs
+	 * 1 - root item
+	 * 2 - dir items
+	 */
+	ret = btrfs_reserve_metadata_space(root, 6);
 	if (ret)
 		return ret;
 
@@ -340,6 +346,9 @@
 	err = btrfs_commit_transaction(trans, root);
 	if (err && !ret)
 		ret = err;
+
+	btrfs_unreserve_metadata_space(root, 6);
+	btrfs_btree_balance_dirty(root, nr);
 	return ret;
 }
 
@@ -355,19 +364,27 @@
 	if (!root->ref_cows)
 		return -EINVAL;
 
-	ret = btrfs_check_metadata_free_space(root);
+	/*
+	 * 1 - inode item
+	 * 2 - refs
+	 * 1 - root item
+	 * 2 - dir items
+	 */
+	ret = btrfs_reserve_metadata_space(root, 6);
 	if (ret)
 		goto fail_unlock;
 
 	pending_snapshot = kzalloc(sizeof(*pending_snapshot), GFP_NOFS);
 	if (!pending_snapshot) {
 		ret = -ENOMEM;
+		btrfs_unreserve_metadata_space(root, 6);
 		goto fail_unlock;
 	}
 	pending_snapshot->name = kmalloc(namelen + 1, GFP_NOFS);
 	if (!pending_snapshot->name) {
 		ret = -ENOMEM;
 		kfree(pending_snapshot);
+		btrfs_unreserve_metadata_space(root, 6);
 		goto fail_unlock;
 	}
 	memcpy(pending_snapshot->name, name, namelen);
@@ -1215,15 +1232,15 @@
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_trans_handle *trans;
-	int ret = 0;
+	int ret;
 
+	ret = -EPERM;
 	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	if (file->private_data) {
-		ret = -EINPROGRESS;
 		goto out;
-	}
+
+	ret = -EINPROGRESS;
+	if (file->private_data)
+		goto out;
 
 	ret = mnt_want_write(file->f_path.mnt);
 	if (ret)
@@ -1233,12 +1250,19 @@
 	root->fs_info->open_ioctl_trans++;
 	mutex_unlock(&root->fs_info->trans_mutex);
 
+	ret = -ENOMEM;
 	trans = btrfs_start_ioctl_transaction(root, 0);
-	if (trans)
-		file->private_data = trans;
-	else
-		ret = -ENOMEM;
-	/*printk(KERN_INFO "btrfs_ioctl_trans_start on %p\n", file);*/
+	if (!trans)
+		goto out_drop;
+
+	file->private_data = trans;
+	return 0;
+
+out_drop:
+	mutex_lock(&root->fs_info->trans_mutex);
+	root->fs_info->open_ioctl_trans--;
+	mutex_unlock(&root->fs_info->trans_mutex);
+	mnt_drop_write(file->f_path.mnt);
 out:
 	return ret;
 }
@@ -1254,24 +1278,20 @@
 	struct inode *inode = fdentry(file)->d_inode;
 	struct btrfs_root *root = BTRFS_I(inode)->root;
 	struct btrfs_trans_handle *trans;
-	int ret = 0;
 
 	trans = file->private_data;
-	if (!trans) {
-		ret = -EINVAL;
-		goto out;
-	}
-	btrfs_end_transaction(trans, root);
+	if (!trans)
+		return -EINVAL;
 	file->private_data = NULL;
 
+	btrfs_end_transaction(trans, root);
+
 	mutex_lock(&root->fs_info->trans_mutex);
 	root->fs_info->open_ioctl_trans--;
 	mutex_unlock(&root->fs_info->trans_mutex);
 
 	mnt_drop_write(file->f_path.mnt);
-
-out:
-	return ret;
+	return 0;
 }
 
 long btrfs_ioctl(struct file *file, unsigned int
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index b5d6d24..897fba8 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -458,7 +458,7 @@
 	 * start IO on any dirty ones so the wait doesn't stall waiting
 	 * for pdflush to find them
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, end);
 	if (wait) {
 		wait_event(entry->wait, test_bit(BTRFS_ORDERED_COMPLETE,
 						 &entry->flags));
@@ -488,17 +488,15 @@
 	/* start IO across the range first to instantiate any delalloc
 	 * extents
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
 
 	/* The compression code will leave pages locked but return from
 	 * writepage without setting the page writeback.  Starting again
 	 * with WB_SYNC_ALL will end up waiting for the IO to actually start.
 	 */
-	btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
+	filemap_fdatawrite_range(inode->i_mapping, start, orig_end);
 
-	btrfs_wait_on_page_writeback_range(inode->i_mapping,
-					   start >> PAGE_CACHE_SHIFT,
-					   orig_end >> PAGE_CACHE_SHIFT);
+	filemap_fdatawait_range(inode->i_mapping, start, orig_end);
 
 	end = orig_end;
 	found = 0;
@@ -716,89 +714,6 @@
 }
 
 
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * __filemap_fdatawrite_range - start writeback on mapping dirty pages in range
- * @mapping:	address space structure to write
- * @start:	offset in bytes where the range starts
- * @end:	offset in bytes where the range ends (inclusive)
- * @sync_mode:	enable synchronous operation
- *
- * Start writeback against all of a mapping's dirty pages that lie
- * within the byte offsets <start, end> inclusive.
- *
- * If sync_mode is WB_SYNC_ALL then this is a "data integrity" operation, as
- * opposed to a regular memory cleansing writeback.  The difference between
- * these two operations is that if a dirty page/buffer is encountered, it must
- * be waited upon, and not just skipped over.
- */
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
-			   loff_t end, int sync_mode)
-{
-	struct writeback_control wbc = {
-		.sync_mode = sync_mode,
-		.nr_to_write = mapping->nrpages * 2,
-		.range_start = start,
-		.range_end = end,
-	};
-	return btrfs_writepages(mapping, &wbc);
-}
-
-/**
- * taken from mm/filemap.c because it isn't exported
- *
- * wait_on_page_writeback_range - wait for writeback to complete
- * @mapping:	target address_space
- * @start:	beginning page index
- * @end:	ending page index
- *
- * Wait for writeback to complete against pages indexed by start->end
- * inclusive
- */
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
-				       pgoff_t start, pgoff_t end)
-{
-	struct pagevec pvec;
-	int nr_pages;
-	int ret = 0;
-	pgoff_t index;
-
-	if (end < start)
-		return 0;
-
-	pagevec_init(&pvec, 0);
-	index = start;
-	while ((index <= end) &&
-			(nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
-			PAGECACHE_TAG_WRITEBACK,
-			min(end - index, (pgoff_t)PAGEVEC_SIZE-1) + 1)) != 0) {
-		unsigned i;
-
-		for (i = 0; i < nr_pages; i++) {
-			struct page *page = pvec.pages[i];
-
-			/* until radix tree lookup accepts end_index */
-			if (page->index > end)
-				continue;
-
-			wait_on_page_writeback(page);
-			if (PageError(page))
-				ret = -EIO;
-		}
-		pagevec_release(&pvec);
-		cond_resched();
-	}
-
-	/* Check for outstanding write errors */
-	if (test_and_clear_bit(AS_ENOSPC, &mapping->flags))
-		ret = -ENOSPC;
-	if (test_and_clear_bit(AS_EIO, &mapping->flags))
-		ret = -EIO;
-
-	return ret;
-}
-
 /*
  * add a given inode to the list of inodes that must be fully on
  * disk before a transaction commit finishes.
diff --git a/fs/btrfs/ordered-data.h b/fs/btrfs/ordered-data.h
index 993a7ea..f82e874 100644
--- a/fs/btrfs/ordered-data.h
+++ b/fs/btrfs/ordered-data.h
@@ -153,10 +153,6 @@
 int btrfs_ordered_update_i_size(struct inode *inode,
 				struct btrfs_ordered_extent *ordered);
 int btrfs_find_ordered_sum(struct inode *inode, u64 offset, u64 disk_bytenr, u32 *sum);
-int btrfs_wait_on_page_writeback_range(struct address_space *mapping,
-				       pgoff_t start, pgoff_t end);
-int btrfs_fdatawrite_range(struct address_space *mapping, loff_t start,
-			   loff_t end, int sync_mode);
 int btrfs_wait_ordered_extents(struct btrfs_root *root, int nocow_only);
 int btrfs_run_ordered_operations(struct btrfs_root *root, int wait);
 int btrfs_add_ordered_operation(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 6703538..9de9b22 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -344,7 +344,9 @@
 	sb->s_export_op = &btrfs_export_ops;
 	sb->s_xattr = btrfs_xattr_handlers;
 	sb->s_time_gran = 1;
+#ifdef CONFIG_BTRFS_POSIX_ACL
 	sb->s_flags |= MS_POSIXACL;
+#endif
 
 	tree_root = open_ctree(sb, fs_devices, (char *)data);
 
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 88f866f..0b8f36d 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -186,6 +186,9 @@
 	h->alloc_exclude_start = 0;
 	h->delayed_ref_updates = 0;
 
+	if (!current->journal_info)
+		current->journal_info = h;
+
 	root->fs_info->running_transaction->use_count++;
 	record_root_in_trans(h, root);
 	mutex_unlock(&root->fs_info->trans_mutex);
@@ -317,6 +320,9 @@
 		wake_up(&cur_trans->writer_wait);
 	put_transaction(cur_trans);
 	mutex_unlock(&info->trans_mutex);
+
+	if (current->journal_info == trans)
+		current->journal_info = NULL;
 	memset(trans, 0, sizeof(*trans));
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 
@@ -743,6 +749,7 @@
 	memcpy(&pending->root_key, &key, sizeof(key));
 fail:
 	kfree(new_root_item);
+	btrfs_unreserve_metadata_space(root, 6);
 	return ret;
 }
 
@@ -1059,6 +1066,9 @@
 
 	mutex_unlock(&root->fs_info->trans_mutex);
 
+	if (current->journal_info == trans)
+		current->journal_info = NULL;
+
 	kmem_cache_free(btrfs_trans_handle_cachep, trans);
 	return ret;
 }
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 23e7d36..7eda483 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -446,8 +446,10 @@
 			goto error;
 
 		device->name = kstrdup(orig_dev->name, GFP_NOFS);
-		if (!device->name)
+		if (!device->name) {
+			kfree(device);
 			goto error;
+		}
 
 		device->devid = orig_dev->devid;
 		device->work.func = pending_bios_fn;
diff --git a/fs/btrfs/xattr.c b/fs/btrfs/xattr.c
index a9d3bf4..b0fc93f 100644
--- a/fs/btrfs/xattr.c
+++ b/fs/btrfs/xattr.c
@@ -260,7 +260,7 @@
  * attributes are handled directly.
  */
 struct xattr_handler *btrfs_xattr_handlers[] = {
-#ifdef CONFIG_FS_POSIX_ACL
+#ifdef CONFIG_BTRFS_POSIX_ACL
 	&btrfs_xattr_acl_access_handler,
 	&btrfs_xattr_acl_default_handler,
 #endif
diff --git a/fs/buffer.c b/fs/buffer.c
index 24afd74..6fa5302 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -280,7 +280,7 @@
 EXPORT_SYMBOL(invalidate_bdev);
 
 /*
- * Kick pdflush then try to free up some ZONE_NORMAL memory.
+ * Kick the writeback threads then try to free up some ZONE_NORMAL memory.
  */
 static void free_more_memory(void)
 {
@@ -1709,9 +1709,9 @@
 		/*
 		 * If it's a fully non-blocking write attempt and we cannot
 		 * lock the buffer then redirty the page.  Note that this can
-		 * potentially cause a busy-wait loop from pdflush and kswapd
-		 * activity, but those code paths have their own higher-level
-		 * throttling.
+		 * potentially cause a busy-wait loop from writeback threads
+		 * and kswapd activity, but those code paths have their own
+		 * higher-level throttling.
 		 */
 		if (wbc->sync_mode != WB_SYNC_NONE || !wbc->nonblocking) {
 			lock_buffer(bh);
@@ -3208,7 +3208,7 @@
  * still running obsolete flush daemons, so we terminate them here.
  *
  * Use of bdflush() is deprecated and will be removed in a future kernel.
- * The `pdflush' kernel threads fully replace bdflush daemons and this call.
+ * The `flush-X' kernel threads fully replace bdflush daemons and this call.
  */
 SYSCALL_DEFINE2(bdflush, int, func, long, data)
 {
diff --git a/fs/cifs/Kconfig b/fs/cifs/Kconfig
index 6994a0f..80f3525 100644
--- a/fs/cifs/Kconfig
+++ b/fs/cifs/Kconfig
@@ -2,6 +2,7 @@
 	tristate "CIFS support (advanced network filesystem, SMBFS successor)"
 	depends on INET
 	select NLS
+	select SLOW_WORK
 	help
 	  This is the client VFS module for the Common Internet File System
 	  (CIFS) protocol which is the successor to the Server Message Block
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 90c5b39..9a5e4f5 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -64,9 +64,6 @@
 unsigned int extended_security = CIFSSEC_DEF;
 /* unsigned int ntlmv2_support = 0; */
 unsigned int sign_CIFS_PDUs = 1;
-extern struct task_struct *oplockThread; /* remove sparse warning */
-struct task_struct *oplockThread = NULL;
-/* extern struct task_struct * dnotifyThread; remove sparse warning */
 static const struct super_operations cifs_super_ops;
 unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
 module_param(CIFSMaxBufSize, int, 0);
@@ -972,89 +969,12 @@
 	kmem_cache_destroy(cifs_oplock_cachep);
 }
 
-static int cifs_oplock_thread(void *dummyarg)
-{
-	struct oplock_q_entry *oplock_item;
-	struct cifsTconInfo *pTcon;
-	struct inode *inode;
-	__u16  netfid;
-	int rc, waitrc = 0;
-
-	set_freezable();
-	do {
-		if (try_to_freeze())
-			continue;
-
-		spin_lock(&cifs_oplock_lock);
-		if (list_empty(&cifs_oplock_list)) {
-			spin_unlock(&cifs_oplock_lock);
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(39*HZ);
-		} else {
-			oplock_item = list_entry(cifs_oplock_list.next,
-						struct oplock_q_entry, qhead);
-			cFYI(1, ("found oplock item to write out"));
-			pTcon = oplock_item->tcon;
-			inode = oplock_item->pinode;
-			netfid = oplock_item->netfid;
-			spin_unlock(&cifs_oplock_lock);
-			DeleteOplockQEntry(oplock_item);
-			/* can not grab inode sem here since it would
-				deadlock when oplock received on delete
-				since vfs_unlink holds the i_mutex across
-				the call */
-			/* mutex_lock(&inode->i_mutex);*/
-			if (S_ISREG(inode->i_mode)) {
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-				if (CIFS_I(inode)->clientCanCacheAll == 0)
-					break_lease(inode, FMODE_READ);
-				else if (CIFS_I(inode)->clientCanCacheRead == 0)
-					break_lease(inode, FMODE_WRITE);
-#endif
-				rc = filemap_fdatawrite(inode->i_mapping);
-				if (CIFS_I(inode)->clientCanCacheRead == 0) {
-					waitrc = filemap_fdatawait(
-							      inode->i_mapping);
-					invalidate_remote_inode(inode);
-				}
-				if (rc == 0)
-					rc = waitrc;
-			} else
-				rc = 0;
-			/* mutex_unlock(&inode->i_mutex);*/
-			if (rc)
-				CIFS_I(inode)->write_behind_rc = rc;
-			cFYI(1, ("Oplock flush inode %p rc %d",
-				inode, rc));
-
-				/* releasing stale oplock after recent reconnect
-				of smb session using a now incorrect file
-				handle is not a data integrity issue but do
-				not bother sending an oplock release if session
-				to server still is disconnected since oplock
-				already released by the server in that case */
-			if (!pTcon->need_reconnect) {
-				rc = CIFSSMBLock(0, pTcon, netfid,
-						0 /* len */ , 0 /* offset */, 0,
-						0, LOCKING_ANDX_OPLOCK_RELEASE,
-						false /* wait flag */);
-				cFYI(1, ("Oplock release rc = %d", rc));
-			}
-			set_current_state(TASK_INTERRUPTIBLE);
-			schedule_timeout(1);  /* yield in case q were corrupt */
-		}
-	} while (!kthread_should_stop());
-
-	return 0;
-}
-
 static int __init
 init_cifs(void)
 {
 	int rc = 0;
 	cifs_proc_init();
 	INIT_LIST_HEAD(&cifs_tcp_ses_list);
-	INIT_LIST_HEAD(&cifs_oplock_list);
 #ifdef CONFIG_CIFS_EXPERIMENTAL
 	INIT_LIST_HEAD(&GlobalDnotifyReqList);
 	INIT_LIST_HEAD(&GlobalDnotifyRsp_Q);
@@ -1083,7 +1003,6 @@
 	rwlock_init(&GlobalSMBSeslock);
 	rwlock_init(&cifs_tcp_ses_lock);
 	spin_lock_init(&GlobalMid_Lock);
-	spin_lock_init(&cifs_oplock_lock);
 
 	if (cifs_max_pending < 2) {
 		cifs_max_pending = 2;
@@ -1118,16 +1037,13 @@
 	if (rc)
 		goto out_unregister_key_type;
 #endif
-	oplockThread = kthread_run(cifs_oplock_thread, NULL, "cifsoplockd");
-	if (IS_ERR(oplockThread)) {
-		rc = PTR_ERR(oplockThread);
-		cERROR(1, ("error %d create oplock thread", rc));
-		goto out_unregister_dfs_key_type;
-	}
+	rc = slow_work_register_user();
+	if (rc)
+		goto out_unregister_resolver_key;
 
 	return 0;
 
- out_unregister_dfs_key_type:
+ out_unregister_resolver_key:
 #ifdef CONFIG_CIFS_DFS_UPCALL
 	unregister_key_type(&key_type_dns_resolver);
  out_unregister_key_type:
@@ -1164,7 +1080,6 @@
 	cifs_destroy_inodecache();
 	cifs_destroy_mids();
 	cifs_destroy_request_bufs();
-	kthread_stop(oplockThread);
 }
 
 MODULE_AUTHOR("Steve French <sfrench@us.ibm.com>");
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index 6cfc81a..5d0fde1 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -18,6 +18,7 @@
  */
 #include <linux/in.h>
 #include <linux/in6.h>
+#include <linux/slow-work.h>
 #include "cifs_fs_sb.h"
 #include "cifsacl.h"
 /*
@@ -346,14 +347,16 @@
 	/* lock scope id (0 if none) */
 	struct file *pfile; /* needed for writepage */
 	struct inode *pInode; /* needed for oplock break */
+	struct vfsmount *mnt;
 	struct mutex lock_mutex;
 	struct list_head llist; /* list of byte range locks we have. */
 	bool closePend:1;	/* file is marked to close */
 	bool invalidHandle:1;	/* file closed via session abend */
-	bool messageMode:1;	/* for pipes: message vs byte mode */
+	bool oplock_break_cancelled:1;
 	atomic_t count;		/* reference count */
 	struct mutex fh_mutex; /* prevents reopen race after dead ses*/
 	struct cifs_search_info srch_inf;
+	struct slow_work oplock_break; /* slow_work job for oplock breaks */
 };
 
 /* Take a reference on the file private data */
@@ -365,8 +368,10 @@
 /* Release a reference on the file private data */
 static inline void cifsFileInfo_put(struct cifsFileInfo *cifs_file)
 {
-	if (atomic_dec_and_test(&cifs_file->count))
+	if (atomic_dec_and_test(&cifs_file->count)) {
+		iput(cifs_file->pInode);
 		kfree(cifs_file);
+	}
 }
 
 /*
@@ -382,7 +387,6 @@
 	unsigned long time;	/* jiffies of last update/check of inode */
 	bool clientCanCacheRead:1;	/* read oplock */
 	bool clientCanCacheAll:1;	/* read and writebehind oplock */
-	bool oplockPending:1;
 	bool delete_pending:1;		/* DELETE_ON_CLOSE is set */
 	u64  server_eof;		/* current file size on server */
 	u64  uniqueid;			/* server inode number */
@@ -585,9 +589,9 @@
 #define   CIFSSEC_MUST_LANMAN	0x10010
 #define   CIFSSEC_MUST_PLNTXT	0x20020
 #ifdef CONFIG_CIFS_UPCALL
-#define   CIFSSEC_MASK          0xAF0AF /* allows weak security but also krb5 */
+#define   CIFSSEC_MASK          0xBF0BF /* allows weak security but also krb5 */
 #else
-#define   CIFSSEC_MASK          0xA70A7 /* current flags supported if weak */
+#define   CIFSSEC_MASK          0xB70B7 /* current flags supported if weak */
 #endif /* UPCALL */
 #else /* do not allow weak pw hash */
 #ifdef CONFIG_CIFS_UPCALL
@@ -669,12 +673,6 @@
  */
 GLOBAL_EXTERN rwlock_t GlobalSMBSeslock;
 
-/* Global list of oplocks */
-GLOBAL_EXTERN struct list_head cifs_oplock_list;
-
-/* Protects the cifs_oplock_list */
-GLOBAL_EXTERN spinlock_t cifs_oplock_lock;
-
 /* Outstanding dir notify requests */
 GLOBAL_EXTERN struct list_head GlobalDnotifyReqList;
 /* DirNotify response queue */
@@ -725,3 +723,4 @@
 GLOBAL_EXTERN unsigned int cifs_min_small;  /* min size of small buf pool */
 GLOBAL_EXTERN unsigned int cifs_max_pending; /* MAX requests at once to server*/
 
+extern const struct slow_work_ops cifs_oplock_break_ops;
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index da8fbf5..6928c24 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -86,18 +86,17 @@
 			     const int stage,
 			     const struct nls_table *nls_cp);
 extern __u16 GetNextMid(struct TCP_Server_Info *server);
-extern struct oplock_q_entry *AllocOplockQEntry(struct inode *, u16,
-						 struct cifsTconInfo *);
-extern void DeleteOplockQEntry(struct oplock_q_entry *);
-extern void DeleteTconOplockQEntries(struct cifsTconInfo *);
 extern struct timespec cifs_NTtimeToUnix(__le64 utc_nanoseconds_since_1601);
 extern u64 cifs_UnixTimeToNT(struct timespec);
 extern struct timespec cnvrtDosUnixTm(__le16 le_date, __le16 le_time,
 				      int offset);
 
+extern struct cifsFileInfo *cifs_new_fileinfo(struct inode *newinode,
+				__u16 fileHandle, struct file *file,
+				struct vfsmount *mnt, unsigned int oflags);
 extern int cifs_posix_open(char *full_path, struct inode **pinode,
-			   struct super_block *sb, int mode, int oflags,
-			   int *poplock, __u16 *pnetfid, int xid);
+			   struct vfsmount *mnt, int mode, int oflags,
+			   __u32 *poplock, __u16 *pnetfid, int xid);
 extern void cifs_unix_basic_to_fattr(struct cifs_fattr *fattr,
 				     FILE_UNIX_BASIC_INFO *info,
 				     struct cifs_sb_info *cifs_sb);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index 301e307..941441d 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -94,6 +94,7 @@
 	list_for_each_safe(tmp, tmp1, &pTcon->openFileList) {
 		open_file = list_entry(tmp, struct cifsFileInfo, tlist);
 		open_file->invalidHandle = true;
+		open_file->oplock_break_cancelled = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
 	/* BB Add call to invalidate_inodes(sb) for all superblocks mounted
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index d496824..43003e0 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1670,7 +1670,6 @@
 	CIFSSMBTDis(xid, tcon);
 	_FreeXid(xid);
 
-	DeleteTconOplockQEntries(tcon);
 	tconInfoFree(tcon);
 	cifs_put_smb_ses(ses);
 }
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index a6424cf..627a60a 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -24,6 +24,7 @@
 #include <linux/stat.h>
 #include <linux/slab.h>
 #include <linux/namei.h>
+#include <linux/mount.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
 #include "cifsglob.h"
@@ -129,44 +130,45 @@
 	return full_path;
 }
 
-static void
-cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
-			struct cifsTconInfo *tcon, bool write_only)
+struct cifsFileInfo *
+cifs_new_fileinfo(struct inode *newinode, __u16 fileHandle,
+		  struct file *file, struct vfsmount *mnt, unsigned int oflags)
 {
 	int oplock = 0;
 	struct cifsFileInfo *pCifsFile;
 	struct cifsInodeInfo *pCifsInode;
+	struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
 
 	pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
 	if (pCifsFile == NULL)
-		return;
+		return pCifsFile;
 
 	if (oplockEnabled)
 		oplock = REQ_OPLOCK;
 
 	pCifsFile->netfid = fileHandle;
 	pCifsFile->pid = current->tgid;
-	pCifsFile->pInode = newinode;
+	pCifsFile->pInode = igrab(newinode);
+	pCifsFile->mnt = mnt;
+	pCifsFile->pfile = file;
 	pCifsFile->invalidHandle = false;
 	pCifsFile->closePend = false;
 	mutex_init(&pCifsFile->fh_mutex);
 	mutex_init(&pCifsFile->lock_mutex);
 	INIT_LIST_HEAD(&pCifsFile->llist);
 	atomic_set(&pCifsFile->count, 1);
+	slow_work_init(&pCifsFile->oplock_break, &cifs_oplock_break_ops);
 
-	/* set the following in open now
-			pCifsFile->pfile = file; */
 	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &tcon->openFileList);
+	list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
 	pCifsInode = CIFS_I(newinode);
 	if (pCifsInode) {
 		/* if readable file instance put first in list*/
-		if (write_only)
+		if (oflags & FMODE_READ)
+			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+		else
 			list_add_tail(&pCifsFile->flist,
 				      &pCifsInode->openFileList);
-		else
-			list_add(&pCifsFile->flist, &pCifsInode->openFileList);
 
 		if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
 			pCifsInode->clientCanCacheAll = true;
@@ -176,18 +178,18 @@
 				pCifsInode->clientCanCacheRead = true;
 	}
 	write_unlock(&GlobalSMBSeslock);
+
+	return pCifsFile;
 }
 
 int cifs_posix_open(char *full_path, struct inode **pinode,
-		    struct super_block *sb, int mode, int oflags,
-		    int *poplock, __u16 *pnetfid, int xid)
+		    struct vfsmount *mnt, int mode, int oflags,
+		    __u32 *poplock, __u16 *pnetfid, int xid)
 {
 	int rc;
-	__u32 oplock;
-	bool write_only = false;
 	FILE_UNIX_BASIC_INFO *presp_data;
 	__u32 posix_flags = 0;
-	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(mnt->mnt_sb);
 	struct cifs_fattr fattr;
 
 	cFYI(1, ("posix open %s", full_path));
@@ -223,12 +225,9 @@
 	if (oflags & O_DIRECT)
 		posix_flags |= SMB_O_DIRECT;
 
-	if (!(oflags & FMODE_READ))
-		write_only = true;
-
 	mode &= ~current_umask();
 	rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
-			pnetfid, presp_data, &oplock, full_path,
+			pnetfid, presp_data, poplock, full_path,
 			cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
 					CIFS_MOUNT_MAP_SPECIAL_CHR);
 	if (rc)
@@ -244,7 +243,7 @@
 
 	/* get new inode and set it up */
 	if (*pinode == NULL) {
-		*pinode = cifs_iget(sb, &fattr);
+		*pinode = cifs_iget(mnt->mnt_sb, &fattr);
 		if (!*pinode) {
 			rc = -ENOMEM;
 			goto posix_open_ret;
@@ -253,7 +252,7 @@
 		cifs_fattr_to_inode(*pinode, &fattr);
 	}
 
-	cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+	cifs_new_fileinfo(*pinode, *pnetfid, NULL, mnt, oflags);
 
 posix_open_ret:
 	kfree(presp_data);
@@ -280,7 +279,7 @@
 	int rc = -ENOENT;
 	int xid;
 	int create_options = CREATE_NOT_DIR;
-	int oplock = 0;
+	__u32 oplock = 0;
 	int oflags;
 	bool posix_create = false;
 	/*
@@ -298,7 +297,6 @@
 	FILE_ALL_INFO *buf = NULL;
 	struct inode *newinode = NULL;
 	int disposition = FILE_OVERWRITE_IF;
-	bool write_only = false;
 
 	xid = GetXid();
 
@@ -323,7 +321,7 @@
 	if (tcon->unix_ext && (tcon->ses->capabilities & CAP_UNIX) &&
 	    (CIFS_UNIX_POSIX_PATH_OPS_CAP &
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
-		rc = cifs_posix_open(full_path, &newinode, inode->i_sb,
+		rc = cifs_posix_open(full_path, &newinode, nd->path.mnt,
 				     mode, oflags, &oplock, &fileHandle, xid);
 		/* EIO could indicate that (posix open) operation is not
 		   supported, despite what server claimed in capability
@@ -351,11 +349,8 @@
 		desiredAccess = 0;
 		if (oflags & FMODE_READ)
 			desiredAccess |= GENERIC_READ; /* is this too little? */
-		if (oflags & FMODE_WRITE) {
+		if (oflags & FMODE_WRITE)
 			desiredAccess |= GENERIC_WRITE;
-			if (!(oflags & FMODE_READ))
-				write_only = true;
-		}
 
 		if ((oflags & (O_CREAT | O_EXCL)) == (O_CREAT | O_EXCL))
 			disposition = FILE_CREATE;
@@ -470,8 +465,8 @@
 		/* mknod case - do not leave file open */
 		CIFSSMBClose(xid, tcon, fileHandle);
 	} else if (!(posix_create) && (newinode)) {
-			cifs_fill_fileinfo(newinode, fileHandle,
-					cifs_sb->tcon, write_only);
+			cifs_new_fileinfo(newinode, fileHandle, NULL,
+						nd->path.mnt, oflags);
 	}
 cifs_create_out:
 	kfree(buf);
@@ -611,7 +606,7 @@
 {
 	int xid;
 	int rc = 0; /* to get around spurious gcc warning, set to zero here */
-	int oplock = 0;
+	__u32 oplock = 0;
 	__u16 fileHandle = 0;
 	bool posix_open = false;
 	struct cifs_sb_info *cifs_sb;
@@ -683,8 +678,7 @@
 		if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
 		     (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
 		     (nd->intent.open.flags & O_CREAT)) {
-			rc = cifs_posix_open(full_path, &newInode,
-					parent_dir_inode->i_sb,
+			rc = cifs_posix_open(full_path, &newInode, nd->path.mnt,
 					nd->intent.open.create_mode,
 					nd->intent.open.flags, &oplock,
 					&fileHandle, xid);
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index fa7beac..429337e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -30,6 +30,7 @@
 #include <linux/writeback.h>
 #include <linux/task_io_accounting_ops.h>
 #include <linux/delay.h>
+#include <linux/mount.h>
 #include <asm/div64.h>
 #include "cifsfs.h"
 #include "cifspdu.h"
@@ -39,27 +40,6 @@
 #include "cifs_debug.h"
 #include "cifs_fs_sb.h"
 
-static inline struct cifsFileInfo *cifs_init_private(
-	struct cifsFileInfo *private_data, struct inode *inode,
-	struct file *file, __u16 netfid)
-{
-	memset(private_data, 0, sizeof(struct cifsFileInfo));
-	private_data->netfid = netfid;
-	private_data->pid = current->tgid;
-	mutex_init(&private_data->fh_mutex);
-	mutex_init(&private_data->lock_mutex);
-	INIT_LIST_HEAD(&private_data->llist);
-	private_data->pfile = file; /* needed for writepage */
-	private_data->pInode = inode;
-	private_data->invalidHandle = false;
-	private_data->closePend = false;
-	/* Initialize reference count to one.  The private data is
-	freed on the release of the last reference */
-	atomic_set(&private_data->count, 1);
-
-	return private_data;
-}
-
 static inline int cifs_convert_flags(unsigned int flags)
 {
 	if ((flags & O_ACCMODE) == O_RDONLY)
@@ -123,9 +103,11 @@
 }
 
 /* all arguments to this function must be checked for validity in caller */
-static inline int cifs_posix_open_inode_helper(struct inode *inode,
-			struct file *file, struct cifsInodeInfo *pCifsInode,
-			struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
+static inline int
+cifs_posix_open_inode_helper(struct inode *inode, struct file *file,
+			     struct cifsInodeInfo *pCifsInode,
+			     struct cifsFileInfo *pCifsFile, __u32 oplock,
+			     u16 netfid)
 {
 
 	write_lock(&GlobalSMBSeslock);
@@ -219,17 +201,6 @@
 	struct timespec temp;
 	int rc;
 
-	/* want handles we can use to read with first
-	   in the list so we do not have to walk the
-	   list to search for one in write_begin */
-	if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
-		list_add_tail(&pCifsFile->flist,
-			      &pCifsInode->openFileList);
-	} else {
-		list_add(&pCifsFile->flist,
-			 &pCifsInode->openFileList);
-	}
-	write_unlock(&GlobalSMBSeslock);
 	if (pCifsInode->clientCanCacheRead) {
 		/* we have the inode open somewhere else
 		   no need to discard cache data */
@@ -279,7 +250,8 @@
 int cifs_open(struct inode *inode, struct file *file)
 {
 	int rc = -EACCES;
-	int xid, oplock;
+	int xid;
+	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
 	struct cifsFileInfo *pCifsFile;
@@ -324,7 +296,7 @@
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, &inode, inode->i_sb,
+		rc = cifs_posix_open(full_path, &inode, file->f_path.mnt,
 				     cifs_sb->mnt_file_mode /* ignored */,
 				     oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -414,24 +386,17 @@
 		cFYI(1, ("cifs_open returned 0x%x", rc));
 		goto out;
 	}
-	file->private_data =
-		kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+	pCifsFile = cifs_new_fileinfo(inode, netfid, file, file->f_path.mnt,
+					file->f_flags);
+	file->private_data = pCifsFile;
 	if (file->private_data == NULL) {
 		rc = -ENOMEM;
 		goto out;
 	}
-	pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
-	write_lock(&GlobalSMBSeslock);
-	list_add(&pCifsFile->tlist, &tcon->openFileList);
 
-	pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
-	if (pCifsInode) {
-		rc = cifs_open_inode_helper(inode, file, pCifsInode,
-					    pCifsFile, tcon,
-					    &oplock, buf, full_path, xid);
-	} else {
-		write_unlock(&GlobalSMBSeslock);
-	}
+	rc = cifs_open_inode_helper(inode, file, pCifsInode, pCifsFile, tcon,
+				    &oplock, buf, full_path, xid);
 
 	if (oplock & CIFS_CREATE_ACTION) {
 		/* time to set mode which we can not set earlier due to
@@ -474,7 +439,8 @@
 static int cifs_reopen_file(struct file *file, bool can_flush)
 {
 	int rc = -EACCES;
-	int xid, oplock;
+	int xid;
+	__u32 oplock;
 	struct cifs_sb_info *cifs_sb;
 	struct cifsTconInfo *tcon;
 	struct cifsFileInfo *pCifsFile;
@@ -543,7 +509,7 @@
 			le64_to_cpu(tcon->fsUnixInfo.Capability))) {
 		int oflags = (int) cifs_posix_convert_flags(file->f_flags);
 		/* can not refresh inode info since size could be stale */
-		rc = cifs_posix_open(full_path, NULL, inode->i_sb,
+		rc = cifs_posix_open(full_path, NULL, file->f_path.mnt,
 				     cifs_sb->mnt_file_mode /* ignored */,
 				     oflags, &oplock, &netfid, xid);
 		if (rc == 0) {
@@ -2308,6 +2274,73 @@
 	return rc;
 }
 
+static void
+cifs_oplock_break(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	struct inode *inode = cfile->pInode;
+	struct cifsInodeInfo *cinode = CIFS_I(inode);
+	struct cifs_sb_info *cifs_sb = CIFS_SB(cfile->mnt->mnt_sb);
+	int rc, waitrc = 0;
+
+	if (inode && S_ISREG(inode->i_mode)) {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+		if (cinode->clientCanCacheAll == 0)
+			break_lease(inode, FMODE_READ);
+		else if (cinode->clientCanCacheRead == 0)
+			break_lease(inode, FMODE_WRITE);
+#endif
+		rc = filemap_fdatawrite(inode->i_mapping);
+		if (cinode->clientCanCacheRead == 0) {
+			waitrc = filemap_fdatawait(inode->i_mapping);
+			invalidate_remote_inode(inode);
+		}
+		if (!rc)
+			rc = waitrc;
+		if (rc)
+			cinode->write_behind_rc = rc;
+		cFYI(1, ("Oplock flush inode %p rc %d", inode, rc));
+	}
+
+	/*
+	 * releasing stale oplock after recent reconnect of smb session using
+	 * a now incorrect file handle is not a data integrity issue but do
+	 * not bother sending an oplock release if session to server still is
+	 * disconnected since oplock already released by the server
+	 */
+	if (!cfile->closePend && !cfile->oplock_break_cancelled) {
+		rc = CIFSSMBLock(0, cifs_sb->tcon, cfile->netfid, 0, 0, 0, 0,
+				 LOCKING_ANDX_OPLOCK_RELEASE, false);
+		cFYI(1, ("Oplock release rc = %d", rc));
+	}
+}
+
+static int
+cifs_oplock_break_get(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	mntget(cfile->mnt);
+	cifsFileInfo_get(cfile);
+	return 0;
+}
+
+static void
+cifs_oplock_break_put(struct slow_work *work)
+{
+	struct cifsFileInfo *cfile = container_of(work, struct cifsFileInfo,
+						  oplock_break);
+	mntput(cfile->mnt);
+	cifsFileInfo_put(cfile);
+}
+
+const struct slow_work_ops cifs_oplock_break_ops = {
+	.get_ref	= cifs_oplock_break_get,
+	.put_ref	= cifs_oplock_break_put,
+	.execute	= cifs_oplock_break,
+};
+
 const struct address_space_operations cifs_addr_ops = {
 	.readpage = cifs_readpage,
 	.readpages = cifs_readpages,
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index e079a91..0241b25 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -32,7 +32,6 @@
 
 extern mempool_t *cifs_sm_req_poolp;
 extern mempool_t *cifs_req_poolp;
-extern struct task_struct *oplockThread;
 
 /* The xid serves as a useful identifier for each incoming vfs request,
    in a similar way to the mid which is useful to track each sent smb,
@@ -500,6 +499,7 @@
 	struct cifsTconInfo *tcon;
 	struct cifsInodeInfo *pCifsInode;
 	struct cifsFileInfo *netfile;
+	int rc;
 
 	cFYI(1, ("Checking for oplock break or dnotify response"));
 	if ((pSMB->hdr.Command == SMB_COM_NT_TRANSACT) &&
@@ -562,30 +562,40 @@
 				continue;
 
 			cifs_stats_inc(&tcon->num_oplock_brks);
-			write_lock(&GlobalSMBSeslock);
+			read_lock(&GlobalSMBSeslock);
 			list_for_each(tmp2, &tcon->openFileList) {
 				netfile = list_entry(tmp2, struct cifsFileInfo,
 						     tlist);
 				if (pSMB->Fid != netfile->netfid)
 					continue;
 
-				write_unlock(&GlobalSMBSeslock);
-				read_unlock(&cifs_tcp_ses_lock);
+				/*
+				 * don't do anything if file is about to be
+				 * closed anyway.
+				 */
+				if (netfile->closePend) {
+					read_unlock(&GlobalSMBSeslock);
+					read_unlock(&cifs_tcp_ses_lock);
+					return true;
+				}
+
 				cFYI(1, ("file id match, oplock break"));
 				pCifsInode = CIFS_I(netfile->pInode);
 				pCifsInode->clientCanCacheAll = false;
 				if (pSMB->OplockLevel == 0)
 					pCifsInode->clientCanCacheRead = false;
-				pCifsInode->oplockPending = true;
-				AllocOplockQEntry(netfile->pInode,
-						  netfile->netfid, tcon);
-				cFYI(1, ("about to wake up oplock thread"));
-				if (oplockThread)
-					wake_up_process(oplockThread);
-
+				rc = slow_work_enqueue(&netfile->oplock_break);
+				if (rc) {
+					cERROR(1, ("failed to enqueue oplock "
+						   "break: %d\n", rc));
+				} else {
+					netfile->oplock_break_cancelled = false;
+				}
+				read_unlock(&GlobalSMBSeslock);
+				read_unlock(&cifs_tcp_ses_lock);
 				return true;
 			}
-			write_unlock(&GlobalSMBSeslock);
+			read_unlock(&GlobalSMBSeslock);
 			read_unlock(&cifs_tcp_ses_lock);
 			cFYI(1, ("No matching file for oplock break"));
 			return true;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index f823a4a..1f098ca 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -146,7 +146,7 @@
 	}
 }
 
-void
+static void
 cifs_dir_info_to_fattr(struct cifs_fattr *fattr, FILE_DIRECTORY_INFO *info,
 		       struct cifs_sb_info *cifs_sb)
 {
@@ -161,7 +161,7 @@
 	cifs_fill_common_info(fattr, cifs_sb);
 }
 
-void
+static void
 cifs_std_info_to_fattr(struct cifs_fattr *fattr, FIND_FILE_STANDARD_INFO *info,
 		       struct cifs_sb_info *cifs_sb)
 {
diff --git a/fs/cifs/transport.c b/fs/cifs/transport.c
index 1da4ab2..07b8e71 100644
--- a/fs/cifs/transport.c
+++ b/fs/cifs/transport.c
@@ -103,56 +103,6 @@
 	mempool_free(midEntry, cifs_mid_poolp);
 }
 
-struct oplock_q_entry *
-AllocOplockQEntry(struct inode *pinode, __u16 fid, struct cifsTconInfo *tcon)
-{
-	struct oplock_q_entry *temp;
-	if ((pinode == NULL) || (tcon == NULL)) {
-		cERROR(1, ("Null parms passed to AllocOplockQEntry"));
-		return NULL;
-	}
-	temp = (struct oplock_q_entry *) kmem_cache_alloc(cifs_oplock_cachep,
-						       GFP_KERNEL);
-	if (temp == NULL)
-		return temp;
-	else {
-		temp->pinode = pinode;
-		temp->tcon = tcon;
-		temp->netfid = fid;
-		spin_lock(&cifs_oplock_lock);
-		list_add_tail(&temp->qhead, &cifs_oplock_list);
-		spin_unlock(&cifs_oplock_lock);
-	}
-	return temp;
-}
-
-void DeleteOplockQEntry(struct oplock_q_entry *oplockEntry)
-{
-	spin_lock(&cifs_oplock_lock);
-    /* should we check if list empty first? */
-	list_del(&oplockEntry->qhead);
-	spin_unlock(&cifs_oplock_lock);
-	kmem_cache_free(cifs_oplock_cachep, oplockEntry);
-}
-
-
-void DeleteTconOplockQEntries(struct cifsTconInfo *tcon)
-{
-	struct oplock_q_entry *temp;
-
-	if (tcon == NULL)
-		return;
-
-	spin_lock(&cifs_oplock_lock);
-	list_for_each_entry(temp, &cifs_oplock_list, qhead) {
-		if ((temp->tcon) && (temp->tcon == tcon)) {
-			list_del(&temp->qhead);
-			kmem_cache_free(cifs_oplock_cachep, temp);
-		}
-	}
-	spin_unlock(&cifs_oplock_lock);
-}
-
 static int
 smb_sendv(struct TCP_Server_Info *server, struct kvec *iov, int n_vec)
 {
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c
index 0376ac6..be4392c 100644
--- a/fs/coda/psdev.c
+++ b/fs/coda/psdev.c
@@ -22,6 +22,7 @@
 #include <linux/kernel.h>
 #include <linux/major.h>
 #include <linux/time.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/fcntl.h>
diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig
index 0c754e6..8aadb99 100644
--- a/fs/ecryptfs/Kconfig
+++ b/fs/ecryptfs/Kconfig
@@ -1,6 +1,8 @@
 config ECRYPT_FS
 	tristate "eCrypt filesystem layer support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && KEYS && CRYPTO && NET
+	depends on EXPERIMENTAL && KEYS && NET
+	select CRYPTO_ECB
+	select CRYPTO_CBC
 	help
 	  Encrypted filesystem that operates on the VFS layer.  See
 	  <file:Documentation/filesystems/ecryptfs.txt> to learn more about
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index b91851f..fbb6e5e 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -245,13 +245,11 @@
 		crypto_free_blkcipher(crypt_stat->tfm);
 	if (crypt_stat->hash_tfm)
 		crypto_free_hash(crypt_stat->hash_tfm);
-	mutex_lock(&crypt_stat->keysig_list_mutex);
 	list_for_each_entry_safe(key_sig, key_sig_tmp,
 				 &crypt_stat->keysig_list, crypt_stat_list) {
 		list_del(&key_sig->crypt_stat_list);
 		kmem_cache_free(ecryptfs_key_sig_cache, key_sig);
 	}
-	mutex_unlock(&crypt_stat->keysig_list_mutex);
 	memset(crypt_stat, 0, sizeof(struct ecryptfs_crypt_stat));
 }
 
@@ -511,13 +509,14 @@
 				  + extent_offset), crypt_stat);
 		rc = ecryptfs_write_lower(ecryptfs_inode, enc_extent_virt,
 					  offset, crypt_stat->extent_size);
-		if (rc) {
+		if (rc < 0) {
 			ecryptfs_printk(KERN_ERR, "Error attempting "
 					"to write lower page; rc = [%d]"
 					"\n", rc);
 			goto out;
 		}
 	}
+	rc = 0;
 out:
 	if (enc_extent_page) {
 		kunmap(enc_extent_page);
@@ -633,7 +632,7 @@
 		rc = ecryptfs_read_lower(enc_extent_virt, offset,
 					 crypt_stat->extent_size,
 					 ecryptfs_inode);
-		if (rc) {
+		if (rc < 0) {
 			ecryptfs_printk(KERN_ERR, "Error attempting "
 					"to read lower page; rc = [%d]"
 					"\n", rc);
@@ -797,6 +796,7 @@
 	kfree(full_alg_name);
 	if (IS_ERR(crypt_stat->tfm)) {
 		rc = PTR_ERR(crypt_stat->tfm);
+		crypt_stat->tfm = NULL;
 		ecryptfs_printk(KERN_ERR, "cryptfs: init_crypt_ctx(): "
 				"Error initializing cipher [%s]\n",
 				crypt_stat->cipher);
@@ -925,7 +925,9 @@
 	struct ecryptfs_global_auth_tok *global_auth_tok;
 	int rc = 0;
 
+	mutex_lock(&crypt_stat->keysig_list_mutex);
 	mutex_lock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
 	list_for_each_entry(global_auth_tok,
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
@@ -934,13 +936,13 @@
 		rc = ecryptfs_add_keysig(crypt_stat, global_auth_tok->sig);
 		if (rc) {
 			printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
-			mutex_unlock(
-				&mount_crypt_stat->global_auth_tok_list_mutex);
 			goto out;
 		}
 	}
-	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+
 out:
+	mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
+	mutex_unlock(&crypt_stat->keysig_list_mutex);
 	return rc;
 }
 
@@ -1212,14 +1214,15 @@
 		crypt_stat->extent_size = ECRYPTFS_DEFAULT_EXTENT_SIZE;
 	rc = ecryptfs_read_lower(data, 0, crypt_stat->extent_size,
 				 ecryptfs_inode);
-	if (rc) {
+	if (rc < 0) {
 		printk(KERN_ERR "%s: Error reading header region; rc = [%d]\n",
 		       __func__, rc);
 		goto out;
 	}
 	if (!contains_ecryptfs_marker(data + ECRYPTFS_FILE_SIZE_BYTES)) {
 		rc = -EINVAL;
-	}
+	} else
+		rc = 0;
 out:
 	return rc;
 }
@@ -1314,10 +1317,11 @@
 
 	rc = ecryptfs_write_lower(ecryptfs_dentry->d_inode, virt,
 				  0, virt_len);
-	if (rc)
+	if (rc < 0)
 		printk(KERN_ERR "%s: Error attempting to write header "
-		       "information to lower file; rc = [%d]\n", __func__,
-		       rc);
+		       "information to lower file; rc = [%d]\n", __func__, rc);
+	else
+		rc = 0;
 	return rc;
 }
 
@@ -1597,7 +1601,7 @@
 	}
 	rc = ecryptfs_read_lower(page_virt, 0, crypt_stat->extent_size,
 				 ecryptfs_inode);
-	if (!rc)
+	if (rc >= 0)
 		rc = ecryptfs_read_headers_virt(page_virt, crypt_stat,
 						ecryptfs_dentry,
 						ECRYPTFS_VALIDATE_HEADER_SIZE);
@@ -1702,7 +1706,7 @@
 	} else {
 		printk(KERN_ERR "%s: No support for requested filename "
 		       "encryption method in this release\n", __func__);
-		rc = -ENOTSUPP;
+		rc = -EOPNOTSUPP;
 		goto out;
 	}
 out:
@@ -1763,7 +1767,7 @@
 	if (IS_ERR(*key_tfm)) {
 		rc = PTR_ERR(*key_tfm);
 		printk(KERN_ERR "Unable to allocate crypto cipher with name "
-		       "[%s]; rc = [%d]\n", cipher_name, rc);
+		       "[%s]; rc = [%d]\n", full_alg_name, rc);
 		goto out;
 	}
 	crypto_blkcipher_set_flags(*key_tfm, CRYPTO_TFM_REQ_WEAK_KEY);
@@ -1776,7 +1780,8 @@
 	rc = crypto_blkcipher_setkey(*key_tfm, dummy_key, *key_size);
 	if (rc) {
 		printk(KERN_ERR "Error attempting to set key of size [%zd] for "
-		       "cipher [%s]; rc = [%d]\n", *key_size, cipher_name, rc);
+		       "cipher [%s]; rc = [%d]\n", *key_size, full_alg_name,
+		       rc);
 		rc = -EINVAL;
 		goto out;
 	}
@@ -2166,7 +2171,7 @@
 			(*encoded_name)[(*encoded_name_size)] = '\0';
 			(*encoded_name_size)++;
 		} else {
-			rc = -ENOTSUPP;
+			rc = -EOPNOTSUPP;
 		}
 		if (rc) {
 			printk(KERN_ERR "%s: Error attempting to encode "
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 2f0945d..056fed62 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -476,6 +476,7 @@
 	struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
 	struct dentry *lower_dir_dentry;
 
+	dget(lower_dentry);
 	lower_dir_dentry = lock_parent(lower_dentry);
 	rc = vfs_unlink(lower_dir_inode, lower_dentry);
 	if (rc) {
@@ -489,6 +490,7 @@
 	d_drop(dentry);
 out_unlock:
 	unlock_dir(lower_dir_dentry);
+	dput(lower_dentry);
 	return rc;
 }
 
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index 259525c9..a0a7847 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -416,7 +416,9 @@
 			    &mount_crypt_stat->global_auth_tok_list,
 			    mount_crypt_stat_list) {
 		if (memcmp(walker->sig, sig, ECRYPTFS_SIG_SIZE_HEX) == 0) {
-			(*global_auth_tok) = walker;
+			rc = key_validate(walker->global_auth_tok_key);
+			if (!rc)
+				(*global_auth_tok) = walker;
 			goto out;
 		}
 	}
@@ -612,7 +614,12 @@
 	}
 	/* TODO: Support other key modules than passphrase for
 	 * filename encryption */
-	BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+	if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+		rc = -EOPNOTSUPP;
+		printk(KERN_INFO "%s: Filename encryption only supports "
+		       "password tokens\n", __func__);
+		goto out_free_unlock;
+	}
 	sg_init_one(
 		&s->hash_sg,
 		(u8 *)s->auth_tok->token.password.session_key_encryption_key,
@@ -910,7 +917,12 @@
 	}
 	/* TODO: Support other key modules than passphrase for
 	 * filename encryption */
-	BUG_ON(s->auth_tok->token_type != ECRYPTFS_PASSWORD);
+	if (s->auth_tok->token_type != ECRYPTFS_PASSWORD) {
+		rc = -EOPNOTSUPP;
+		printk(KERN_INFO "%s: Filename encryption only supports "
+		       "password tokens\n", __func__);
+		goto out_free_unlock;
+	}
 	rc = crypto_blkcipher_setkey(
 		s->desc.tfm,
 		s->auth_tok->token.password.session_key_encryption_key,
@@ -1316,8 +1328,10 @@
 		rc = -EINVAL;
 		goto out_free;
 	}
-	ecryptfs_cipher_code_to_string(crypt_stat->cipher,
-				       (u16)data[(*packet_size)]);
+	rc = ecryptfs_cipher_code_to_string(crypt_stat->cipher,
+					    (u16)data[(*packet_size)]);
+	if (rc)
+		goto out_free;
 	/* A little extra work to differentiate among the AES key
 	 * sizes; see RFC2440 */
 	switch(data[(*packet_size)++]) {
@@ -1328,7 +1342,9 @@
 		crypt_stat->key_size =
 			(*new_auth_tok)->session_key.encrypted_key_size;
 	}
-	ecryptfs_init_crypt_ctx(crypt_stat);
+	rc = ecryptfs_init_crypt_ctx(crypt_stat);
+	if (rc)
+		goto out_free;
 	if (unlikely(data[(*packet_size)++] != 0x03)) {
 		printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
 		rc = -ENOSYS;
@@ -2366,21 +2382,18 @@
 int ecryptfs_add_keysig(struct ecryptfs_crypt_stat *crypt_stat, char *sig)
 {
 	struct ecryptfs_key_sig *new_key_sig;
-	int rc = 0;
 
 	new_key_sig = kmem_cache_alloc(ecryptfs_key_sig_cache, GFP_KERNEL);
 	if (!new_key_sig) {
-		rc = -ENOMEM;
 		printk(KERN_ERR
 		       "Error allocating from ecryptfs_key_sig_cache\n");
-		goto out;
+		return -ENOMEM;
 	}
 	memcpy(new_key_sig->keysig, sig, ECRYPTFS_SIG_SIZE_HEX);
-	mutex_lock(&crypt_stat->keysig_list_mutex);
+	/* Caller must hold keysig_list_mutex */
 	list_add(&new_key_sig->crypt_stat_list, &crypt_stat->keysig_list);
-	mutex_unlock(&crypt_stat->keysig_list_mutex);
-out:
-	return rc;
+
+	return 0;
 }
 
 struct kmem_cache *ecryptfs_global_auth_tok_cache;
diff --git a/fs/ecryptfs/kthread.c b/fs/ecryptfs/kthread.c
index c6d7a4d..e14cf7e 100644
--- a/fs/ecryptfs/kthread.c
+++ b/fs/ecryptfs/kthread.c
@@ -136,6 +136,7 @@
 			     const struct cred *cred)
 {
 	struct ecryptfs_open_req *req;
+	int flags = O_LARGEFILE;
 	int rc = 0;
 
 	/* Corresponding dput() and mntput() are done when the
@@ -143,10 +144,14 @@
 	 * destroyed. */
 	dget(lower_dentry);
 	mntget(lower_mnt);
-	(*lower_file) = dentry_open(lower_dentry, lower_mnt,
-				    (O_RDWR | O_LARGEFILE), cred);
+	flags |= IS_RDONLY(lower_dentry->d_inode) ? O_RDONLY : O_RDWR;
+	(*lower_file) = dentry_open(lower_dentry, lower_mnt, flags, cred);
 	if (!IS_ERR(*lower_file))
 		goto out;
+	if (flags & O_RDONLY) {
+		rc = PTR_ERR((*lower_file));
+		goto out;
+	}
 	req = kmem_cache_alloc(ecryptfs_open_req_cache, GFP_KERNEL);
 	if (!req) {
 		rc = -ENOMEM;
@@ -180,21 +185,8 @@
 		       __func__);
 		goto out_unlock;
 	}
-	if (IS_ERR(*req->lower_file)) {
+	if (IS_ERR(*req->lower_file))
 		rc = PTR_ERR(*req->lower_file);
-		dget(lower_dentry);
-		mntget(lower_mnt);
-		(*lower_file) = dentry_open(lower_dentry, lower_mnt,
-					    (O_RDONLY | O_LARGEFILE), cred);
-		if (IS_ERR(*lower_file)) {
-			rc = PTR_ERR(*req->lower_file);
-			(*lower_file) = NULL;
-			printk(KERN_WARNING "%s: Error attempting privileged "
-			       "open of lower file with either RW or RO "
-			       "perms; rc = [%d]. Giving up.\n",
-			       __func__, rc);
-		}
-	}
 out_unlock:
 	mutex_unlock(&req->mux);
 out_free:
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index 9f0aa98..101fe4c 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -129,11 +129,10 @@
 		lower_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry);
 		rc = ecryptfs_privileged_open(&inode_info->lower_file,
 					      lower_dentry, lower_mnt, cred);
-		if (rc || IS_ERR(inode_info->lower_file)) {
+		if (rc) {
 			printk(KERN_ERR "Error opening lower persistent file "
 			       "for lower_dentry [0x%p] and lower_mnt [0x%p]; "
 			       "rc = [%d]\n", lower_dentry, lower_mnt, rc);
-			rc = PTR_ERR(inode_info->lower_file);
 			inode_info->lower_file = NULL;
 		}
 	}
diff --git a/fs/ecryptfs/mmap.c b/fs/ecryptfs/mmap.c
index 05772ae..df4ce99d 100644
--- a/fs/ecryptfs/mmap.c
+++ b/fs/ecryptfs/mmap.c
@@ -396,9 +396,11 @@
 	rc = ecryptfs_write_lower(ecryptfs_inode, file_size_virt, 0,
 				  sizeof(u64));
 	kfree(file_size_virt);
-	if (rc)
+	if (rc < 0)
 		printk(KERN_ERR "%s: Error writing file size to header; "
 		       "rc = [%d]\n", __func__, rc);
+	else
+		rc = 0;
 out:
 	return rc;
 }
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index a137c6e..0cc4faf 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -34,15 +34,14 @@
  *
  * Write data to the lower file.
  *
- * Returns zero on success; non-zero on error
+ * Returns bytes written on success; less than zero on error
  */
 int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
 			 loff_t offset, size_t size)
 {
 	struct ecryptfs_inode_info *inode_info;
-	ssize_t octets_written;
 	mm_segment_t fs_save;
-	int rc = 0;
+	ssize_t rc;
 
 	inode_info = ecryptfs_inode_to_private(ecryptfs_inode);
 	mutex_lock(&inode_info->lower_file_mutex);
@@ -50,14 +49,9 @@
 	inode_info->lower_file->f_pos = offset;
 	fs_save = get_fs();
 	set_fs(get_ds());
-	octets_written = vfs_write(inode_info->lower_file, data, size,
-				   &inode_info->lower_file->f_pos);
+	rc = vfs_write(inode_info->lower_file, data, size,
+		       &inode_info->lower_file->f_pos);
 	set_fs(fs_save);
-	if (octets_written < 0) {
-		printk(KERN_ERR "%s: octets_written = [%td]; "
-		       "expected [%td]\n", __func__, octets_written, size);
-		rc = -EINVAL;
-	}
 	mutex_unlock(&inode_info->lower_file_mutex);
 	mark_inode_dirty_sync(ecryptfs_inode);
 	return rc;
@@ -91,6 +85,8 @@
 		  + offset_in_page);
 	virt = kmap(page_for_lower);
 	rc = ecryptfs_write_lower(ecryptfs_inode, virt, offset, size);
+	if (rc > 0)
+		rc = 0;
 	kunmap(page_for_lower);
 	return rc;
 }
@@ -229,30 +225,24 @@
  * Read @size bytes of data at byte offset @offset from the lower
  * inode into memory location @data.
  *
- * Returns zero on success; non-zero on error
+ * Returns bytes read on success; 0 on EOF; less than zero on error
  */
 int ecryptfs_read_lower(char *data, loff_t offset, size_t size,
 			struct inode *ecryptfs_inode)
 {
 	struct ecryptfs_inode_info *inode_info =
 		ecryptfs_inode_to_private(ecryptfs_inode);
-	ssize_t octets_read;
 	mm_segment_t fs_save;
-	int rc = 0;
+	ssize_t rc;
 
 	mutex_lock(&inode_info->lower_file_mutex);
 	BUG_ON(!inode_info->lower_file);
 	inode_info->lower_file->f_pos = offset;
 	fs_save = get_fs();
 	set_fs(get_ds());
-	octets_read = vfs_read(inode_info->lower_file, data, size,
-			       &inode_info->lower_file->f_pos);
+	rc = vfs_read(inode_info->lower_file, data, size,
+		      &inode_info->lower_file->f_pos);
 	set_fs(fs_save);
-	if (octets_read < 0) {
-		printk(KERN_ERR "%s: octets_read = [%td]; "
-		       "expected [%td]\n", __func__, octets_read, size);
-		rc = -EINVAL;
-	}
 	mutex_unlock(&inode_info->lower_file_mutex);
 	return rc;
 }
@@ -284,6 +274,8 @@
 	offset = ((((loff_t)page_index) << PAGE_CACHE_SHIFT) + offset_in_page);
 	virt = kmap(page_for_ecryptfs);
 	rc = ecryptfs_read_lower(virt, offset, size, ecryptfs_inode);
+	if (rc > 0)
+		rc = 0;
 	kunmap(page_for_ecryptfs);
 	flush_dcache_page(page_for_ecryptfs);
 	return rc;
diff --git a/fs/ecryptfs/super.c b/fs/ecryptfs/super.c
index 12d6496..b15a43a 100644
--- a/fs/ecryptfs/super.c
+++ b/fs/ecryptfs/super.c
@@ -77,7 +77,6 @@
 	struct ecryptfs_inode_info *inode_info;
 
 	inode_info = ecryptfs_inode_to_private(inode);
-	mutex_lock(&inode_info->lower_file_mutex);
 	if (inode_info->lower_file) {
 		struct dentry *lower_dentry =
 			inode_info->lower_file->f_dentry;
@@ -89,7 +88,6 @@
 			d_drop(lower_dentry);
 		}
 	}
-	mutex_unlock(&inode_info->lower_file_mutex);
 	ecryptfs_destroy_crypt_stat(&inode_info->crypt_stat);
 	kmem_cache_free(ecryptfs_inode_info_cache, inode_info);
 }
diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig
index d5c0ea2..9f2d45d 100644
--- a/fs/ext4/Kconfig
+++ b/fs/ext4/Kconfig
@@ -26,20 +26,6 @@
 
 	  If unsure, say N.
 
-config EXT4DEV_COMPAT
-	bool "Enable ext4dev compatibility"
-	depends on EXT4_FS
-	help
-	  Starting with 2.6.28, the name of the ext4 filesystem was
-	  renamed from ext4dev to ext4.  Unfortunately there are some
-	  legacy userspace programs (such as klibc's fstype) have
-	  "ext4dev" hardcoded.
-
-	  To enable backwards compatibility so that systems that are
-	  still expecting to mount ext4 filesystems using ext4dev,
-	  choose Y here.   This feature will go away by 2.6.31, so
-	  please arrange to get your userspace programs fixed!
-
 config EXT4_FS_XATTR
 	bool "Ext4 extended attributes"
 	depends on EXT4_FS
diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h
index e227eea..984ca0c 100644
--- a/fs/ext4/ext4.h
+++ b/fs/ext4/ext4.h
@@ -65,6 +65,12 @@
 /* data type for block group number */
 typedef unsigned int ext4_group_t;
 
+/*
+ * Flags used in mballoc's allocation_context flags field.  
+ *
+ * Also used to show what's going on for debugging purposes when the
+ * flag field is exported via the traceport interface
+ */
 
 /* prefer goal again. length */
 #define EXT4_MB_HINT_MERGE		0x0001
@@ -127,6 +133,16 @@
 	int pages_written;
 	int retval;
 };
+#define	DIO_AIO_UNWRITTEN	0x1
+typedef struct ext4_io_end {
+	struct list_head	list;		/* per-file finished AIO list */
+	struct inode		*inode;		/* file being written to */
+	unsigned int		flag;		/* unwritten or not */
+	int			error;		/* I/O error code */
+	ext4_lblk_t		offset;		/* offset in the file */
+	size_t			size;		/* size of the extent */
+	struct work_struct	work;		/* data work queue */
+} ext4_io_end_t;
 
 /*
  * Special inodes numbers
@@ -347,7 +363,16 @@
 	/* Call ext4_da_update_reserve_space() after successfully 
 	   allocating the blocks */
 #define EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE	0x0008
-
+	/* caller is from the direct IO path, request to creation of an
+	unitialized extents if not allocated, split the uninitialized
+	extent if blocks has been preallocated already*/
+#define EXT4_GET_BLOCKS_DIO			0x0010
+#define EXT4_GET_BLOCKS_CONVERT			0x0020
+#define EXT4_GET_BLOCKS_DIO_CREATE_EXT		(EXT4_GET_BLOCKS_DIO|\
+					 EXT4_GET_BLOCKS_CREATE_UNINIT_EXT)
+	/* Convert extent to initialized after direct IO complete */
+#define EXT4_GET_BLOCKS_DIO_CONVERT_EXT		(EXT4_GET_BLOCKS_CONVERT|\
+					 EXT4_GET_BLOCKS_DIO_CREATE_EXT)
 
 /*
  * ioctl commands
@@ -500,8 +525,8 @@
 static inline __le32 ext4_encode_extra_time(struct timespec *time)
 {
        return cpu_to_le32((sizeof(time->tv_sec) > 4 ?
-			   time->tv_sec >> 32 : 0) |
-			   ((time->tv_nsec << 2) & EXT4_NSEC_MASK));
+			   (time->tv_sec >> 32) & EXT4_EPOCH_MASK : 0) |
+                          ((time->tv_nsec << EXT4_EPOCH_BITS) & EXT4_NSEC_MASK));
 }
 
 static inline void ext4_decode_extra_time(struct timespec *time, __le32 extra)
@@ -509,7 +534,7 @@
        if (sizeof(time->tv_sec) > 4)
 	       time->tv_sec |= (__u64)(le32_to_cpu(extra) & EXT4_EPOCH_MASK)
 			       << 32;
-       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> 2;
+       time->tv_nsec = (le32_to_cpu(extra) & EXT4_NSEC_MASK) >> EXT4_EPOCH_BITS;
 }
 
 #define EXT4_INODE_SET_XTIME(xtime, inode, raw_inode)			       \
@@ -672,6 +697,11 @@
 	__u16 i_extra_isize;
 
 	spinlock_t i_block_reservation_lock;
+
+	/* completed async DIOs that might need unwritten extents handling */
+	struct list_head i_aio_dio_complete_list;
+	/* current io_end structure for async DIO write*/
+	ext4_io_end_t *cur_aio_dio;
 };
 
 /*
@@ -942,18 +972,11 @@
 	unsigned int s_mb_stats;
 	unsigned int s_mb_order2_reqs;
 	unsigned int s_mb_group_prealloc;
+	unsigned int s_max_writeback_mb_bump;
 	/* where last allocation was done - for stream allocation */
 	unsigned long s_mb_last_group;
 	unsigned long s_mb_last_start;
 
-	/* history to debug policy */
-	struct ext4_mb_history *s_mb_history;
-	int s_mb_history_cur;
-	int s_mb_history_max;
-	int s_mb_history_num;
-	spinlock_t s_mb_history_lock;
-	int s_mb_history_filter;
-
 	/* stats for buddy allocator */
 	spinlock_t s_mb_pa_lock;
 	atomic_t s_bal_reqs;	/* number of reqs with len > 1 */
@@ -980,6 +1003,9 @@
 
 	unsigned int s_log_groups_per_flex;
 	struct flex_groups *s_flex_groups;
+
+	/* workqueue for dio unwritten */
+	struct workqueue_struct *dio_unwritten_wq;
 };
 
 static inline struct ext4_sb_info *EXT4_SB(struct super_block *sb)
@@ -1397,7 +1423,7 @@
 		struct address_space *mapping, loff_t from);
 extern int ext4_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf);
 extern qsize_t ext4_get_reserved_space(struct inode *inode);
-
+extern int flush_aio_dio_completed_IO(struct inode *inode);
 /* ioctl.c */
 extern long ext4_ioctl(struct file *, unsigned int, unsigned long);
 extern long ext4_compat_ioctl(struct file *, unsigned int, unsigned long);
@@ -1699,6 +1725,8 @@
 extern void ext4_ext_release(struct super_block *);
 extern long ext4_fallocate(struct inode *inode, int mode, loff_t offset,
 			  loff_t len);
+extern int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+			  loff_t len);
 extern int ext4_get_blocks(handle_t *handle, struct inode *inode,
 			   sector_t block, unsigned int max_blocks,
 			   struct buffer_head *bh, int flags);
diff --git a/fs/ext4/ext4_extents.h b/fs/ext4/ext4_extents.h
index 61652f1..2ca6864 100644
--- a/fs/ext4/ext4_extents.h
+++ b/fs/ext4/ext4_extents.h
@@ -220,6 +220,11 @@
 		(le16_to_cpu(ext->ee_len) - EXT_INIT_MAX_LEN));
 }
 
+static inline void ext4_ext_mark_initialized(struct ext4_extent *ext)
+{
+	ext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(ext));
+}
+
 extern int ext4_ext_calc_metadata_amount(struct inode *inode, int blocks);
 extern ext4_fsblk_t ext_pblock(struct ext4_extent *ex);
 extern ext4_fsblk_t idx_pblock(struct ext4_extent_idx *);
@@ -235,7 +240,7 @@
 				 struct ext4_ext_path *path,
 				 struct ext4_extent *);
 extern unsigned int ext4_ext_check_overlap(struct inode *, struct ext4_extent *, struct ext4_ext_path *);
-extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *);
+extern int ext4_ext_insert_extent(handle_t *, struct inode *, struct ext4_ext_path *, struct ext4_extent *, int);
 extern int ext4_ext_walk_space(struct inode *, ext4_lblk_t, ext4_lblk_t,
 							ext_prepare_callback, void *);
 extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t,
diff --git a/fs/ext4/ext4_jbd2.h b/fs/ext4/ext4_jbd2.h
index 139fb8c..a286598 100644
--- a/fs/ext4/ext4_jbd2.h
+++ b/fs/ext4/ext4_jbd2.h
@@ -161,11 +161,13 @@
 handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks);
 int __ext4_journal_stop(const char *where, handle_t *handle);
 
-#define EXT4_NOJOURNAL_HANDLE	((handle_t *) 0x1)
+#define EXT4_NOJOURNAL_MAX_REF_COUNT ((unsigned long) 4096)
 
+/* Note:  Do not use this for NULL handles.  This is only to determine if
+ * a properly allocated handle is using a journal or not. */
 static inline int ext4_handle_valid(handle_t *handle)
 {
-	if (handle == EXT4_NOJOURNAL_HANDLE)
+	if ((unsigned long)handle < EXT4_NOJOURNAL_MAX_REF_COUNT)
 		return 0;
 	return 1;
 }
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 7a38325..10539e3 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -723,7 +723,7 @@
  * insert new index [@logical;@ptr] into the block at @curp;
  * check where to insert: before @curp or after @curp
  */
-static int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
+int ext4_ext_insert_index(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *curp,
 				int logical, ext4_fsblk_t ptr)
 {
@@ -1586,7 +1586,7 @@
  */
 int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
 				struct ext4_ext_path *path,
-				struct ext4_extent *newext)
+				struct ext4_extent *newext, int flag)
 {
 	struct ext4_extent_header *eh;
 	struct ext4_extent *ex, *fex;
@@ -1602,7 +1602,8 @@
 	BUG_ON(path[depth].p_hdr == NULL);
 
 	/* try to insert block into found extent and return */
-	if (ex && ext4_can_extents_be_merged(inode, ex, newext)) {
+	if (ex && (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		&& ext4_can_extents_be_merged(inode, ex, newext)) {
 		ext_debug("append [%d]%d block to %d:[%d]%d (from %llu)\n",
 				ext4_ext_is_uninitialized(newext),
 				ext4_ext_get_actual_len(newext),
@@ -1722,7 +1723,8 @@
 
 merge:
 	/* try to merge extents to the right */
-	ext4_ext_try_to_merge(inode, path, nearex);
+	if (flag != EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+		ext4_ext_try_to_merge(inode, path, nearex);
 
 	/* try to merge extents to the left */
 
@@ -2378,6 +2380,7 @@
 	 */
 
 	if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_EXTENTS)) {
+#if defined(AGGRESSIVE_TEST) || defined(CHECK_BINSEARCH) || defined(EXTENTS_STATS)
 		printk(KERN_INFO "EXT4-fs: file extents enabled");
 #ifdef AGGRESSIVE_TEST
 		printk(", aggressive tests");
@@ -2389,6 +2392,7 @@
 		printk(", stats");
 #endif
 		printk("\n");
+#endif
 #ifdef EXTENTS_STATS
 		spin_lock_init(&EXT4_SB(sb)->s_ext_stats_lock);
 		EXT4_SB(sb)->s_ext_min = 1 << 30;
@@ -2490,7 +2494,6 @@
 }
 
 #define EXT4_EXT_ZERO_LEN 7
-
 /*
  * This function is called by ext4_ext_get_blocks() if someone tries to write
  * to an uninitialized extent. It may result in splitting the uninitialized
@@ -2583,7 +2586,8 @@
 			ex3->ee_block = cpu_to_le32(iblock);
 			ext4_ext_store_pblock(ex3, newblock);
 			ex3->ee_len = cpu_to_le16(allocated);
-			err = ext4_ext_insert_extent(handle, inode, path, ex3);
+			err = ext4_ext_insert_extent(handle, inode, path,
+							ex3, 0);
 			if (err == -ENOSPC) {
 				err =  ext4_ext_zeroout(inode, &orig_ex);
 				if (err)
@@ -2639,7 +2643,7 @@
 		ext4_ext_store_pblock(ex3, newblock + max_blocks);
 		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
 		ext4_ext_mark_uninitialized(ex3);
-		err = ext4_ext_insert_extent(handle, inode, path, ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, 0);
 		if (err == -ENOSPC) {
 			err =  ext4_ext_zeroout(inode, &orig_ex);
 			if (err)
@@ -2757,7 +2761,7 @@
 	err = ext4_ext_dirty(handle, inode, path + depth);
 	goto out;
 insert:
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, 0);
 	if (err == -ENOSPC) {
 		err =  ext4_ext_zeroout(inode, &orig_ex);
 		if (err)
@@ -2785,6 +2789,324 @@
 }
 
 /*
+ * This function is called by ext4_ext_get_blocks() from
+ * ext4_get_blocks_dio_write() when DIO to write
+ * to an uninitialized extent.
+ *
+ * Writing to an uninitized extent may result in splitting the uninitialized
+ * extent into multiple /intialized unintialized extents (up to three)
+ * There are three possibilities:
+ *   a> There is no split required: Entire extent should be uninitialized
+ *   b> Splits in two extents: Write is happening at either end of the extent
+ *   c> Splits in three extents: Somone is writing in middle of the extent
+ *
+ * One of more index blocks maybe needed if the extent tree grow after
+ * the unintialized extent split. To prevent ENOSPC occur at the IO
+ * complete, we need to split the uninitialized extent before DIO submit
+ * the IO. The uninitilized extent called at this time will be split
+ * into three uninitialized extent(at most). After IO complete, the part
+ * being filled will be convert to initialized by the end_io callback function
+ * via ext4_convert_unwritten_extents().
+ */
+static int ext4_split_unwritten_extents(handle_t *handle,
+					struct inode *inode,
+					struct ext4_ext_path *path,
+					ext4_lblk_t iblock,
+					unsigned int max_blocks,
+					int flags)
+{
+	struct ext4_extent *ex, newex, orig_ex;
+	struct ext4_extent *ex1 = NULL;
+	struct ext4_extent *ex2 = NULL;
+	struct ext4_extent *ex3 = NULL;
+	struct ext4_extent_header *eh;
+	ext4_lblk_t ee_block;
+	unsigned int allocated, ee_len, depth;
+	ext4_fsblk_t newblock;
+	int err = 0;
+	int ret = 0;
+
+	ext_debug("ext4_split_unwritten_extents: inode %lu,"
+		  "iblock %llu, max_blocks %u\n", inode->i_ino,
+		  (unsigned long long)iblock, max_blocks);
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+	ee_block = le32_to_cpu(ex->ee_block);
+	ee_len = ext4_ext_get_actual_len(ex);
+	allocated = ee_len - (iblock - ee_block);
+	newblock = iblock - ee_block + ext_pblock(ex);
+	ex2 = ex;
+	orig_ex.ee_block = ex->ee_block;
+	orig_ex.ee_len   = cpu_to_le16(ee_len);
+	ext4_ext_store_pblock(&orig_ex, ext_pblock(ex));
+
+	/*
+ 	 * if the entire unintialized extent length less than
+ 	 * the size of extent to write, there is no need to split
+ 	 * uninitialized extent
+ 	 */
+ 	if (allocated <= max_blocks)
+		return ret;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* ex1: ee_block to iblock - 1 : uninitialized */
+	if (iblock > ee_block) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * for sanity, update the length of the ex2 extent before
+	 * we insert ex3, if ex1 is NULL. This is to avoid temporary
+	 * overlap of blocks.
+	 */
+	if (!ex1 && allocated > max_blocks)
+		ex2->ee_len = cpu_to_le16(max_blocks);
+	/* ex3: to ee_block + ee_len : uninitialised */
+	if (allocated > max_blocks) {
+		unsigned int newdepth;
+		ex3 = &newex;
+		ex3->ee_block = cpu_to_le32(iblock + max_blocks);
+		ext4_ext_store_pblock(ex3, newblock + max_blocks);
+		ex3->ee_len = cpu_to_le16(allocated - max_blocks);
+		ext4_ext_mark_uninitialized(ex3);
+		err = ext4_ext_insert_extent(handle, inode, path, ex3, flags);
+		if (err == -ENOSPC) {
+			err =  ext4_ext_zeroout(inode, &orig_ex);
+			if (err)
+				goto fix_extent_len;
+			/* update the extent length and mark as initialized */
+			ex->ee_block = orig_ex.ee_block;
+			ex->ee_len   = orig_ex.ee_len;
+			ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+			ext4_ext_dirty(handle, inode, path + depth);
+			/* zeroed the full extent */
+			/* blocks available from iblock */
+			return allocated;
+
+		} else if (err)
+			goto fix_extent_len;
+		/*
+		 * The depth, and hence eh & ex might change
+		 * as part of the insert above.
+		 */
+		newdepth = ext_depth(inode);
+		/*
+		 * update the extent length after successful insert of the
+		 * split extent
+		 */
+		orig_ex.ee_len = cpu_to_le16(ee_len -
+						ext4_ext_get_actual_len(ex3));
+		depth = newdepth;
+		ext4_ext_drop_refs(path);
+		path = ext4_ext_find_extent(inode, iblock, path);
+		if (IS_ERR(path)) {
+			err = PTR_ERR(path);
+			goto out;
+		}
+		eh = path[depth].p_hdr;
+		ex = path[depth].p_ext;
+		if (ex2 != &newex)
+			ex2 = ex;
+
+		err = ext4_ext_get_access(handle, inode, path + depth);
+		if (err)
+			goto out;
+
+		allocated = max_blocks;
+	}
+	/*
+	 * If there was a change of depth as part of the
+	 * insertion of ex3 above, we need to update the length
+	 * of the ex1 extent again here
+	 */
+	if (ex1 && ex1 != ex) {
+		ex1 = ex;
+		ex1->ee_len = cpu_to_le16(iblock - ee_block);
+		ext4_ext_mark_uninitialized(ex1);
+		ex2 = &newex;
+	}
+	/*
+	 * ex2: iblock to iblock + maxblocks-1 : to be direct IO written,
+	 * uninitialised still.
+	 */
+	ex2->ee_block = cpu_to_le32(iblock);
+	ext4_ext_store_pblock(ex2, newblock);
+	ex2->ee_len = cpu_to_le16(allocated);
+	ext4_ext_mark_uninitialized(ex2);
+	if (ex2 != ex)
+		goto insert;
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+	ext_debug("out here\n");
+	goto out;
+insert:
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
+	if (err == -ENOSPC) {
+		err =  ext4_ext_zeroout(inode, &orig_ex);
+		if (err)
+			goto fix_extent_len;
+		/* update the extent length and mark as initialized */
+		ex->ee_block = orig_ex.ee_block;
+		ex->ee_len   = orig_ex.ee_len;
+		ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+		ext4_ext_dirty(handle, inode, path + depth);
+		/* zero out the first half */
+		return allocated;
+	} else if (err)
+		goto fix_extent_len;
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err ? err : allocated;
+
+fix_extent_len:
+	ex->ee_block = orig_ex.ee_block;
+	ex->ee_len   = orig_ex.ee_len;
+	ext4_ext_store_pblock(ex, ext_pblock(&orig_ex));
+	ext4_ext_mark_uninitialized(ex);
+	ext4_ext_dirty(handle, inode, path + depth);
+	return err;
+}
+static int ext4_convert_unwritten_extents_dio(handle_t *handle,
+					      struct inode *inode,
+					      struct ext4_ext_path *path)
+{
+	struct ext4_extent *ex;
+	struct ext4_extent_header *eh;
+	int depth;
+	int err = 0;
+	int ret = 0;
+
+	depth = ext_depth(inode);
+	eh = path[depth].p_hdr;
+	ex = path[depth].p_ext;
+
+	err = ext4_ext_get_access(handle, inode, path + depth);
+	if (err)
+		goto out;
+	/* first mark the extent as initialized */
+	ext4_ext_mark_initialized(ex);
+
+	/*
+	 * We have to see if it can be merged with the extent
+	 * on the left.
+	 */
+	if (ex > EXT_FIRST_EXTENT(eh)) {
+		/*
+		 * To merge left, pass "ex - 1" to try_to_merge(),
+		 * since it merges towards right _only_.
+		 */
+		ret = ext4_ext_try_to_merge(inode, path, ex - 1);
+		if (ret) {
+			err = ext4_ext_correct_indexes(handle, inode, path);
+			if (err)
+				goto out;
+			depth = ext_depth(inode);
+			ex--;
+		}
+	}
+	/*
+	 * Try to Merge towards right.
+	 */
+	ret = ext4_ext_try_to_merge(inode, path, ex);
+	if (ret) {
+		err = ext4_ext_correct_indexes(handle, inode, path);
+		if (err)
+			goto out;
+		depth = ext_depth(inode);
+	}
+	/* Mark modified extent as dirty */
+	err = ext4_ext_dirty(handle, inode, path + depth);
+out:
+	ext4_ext_show_leaf(inode, path);
+	return err;
+}
+
+static int
+ext4_ext_handle_uninitialized_extents(handle_t *handle, struct inode *inode,
+			ext4_lblk_t iblock, unsigned int max_blocks,
+			struct ext4_ext_path *path, int flags,
+			unsigned int allocated, struct buffer_head *bh_result,
+			ext4_fsblk_t newblock)
+{
+	int ret = 0;
+	int err = 0;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
+
+	ext_debug("ext4_ext_handle_uninitialized_extents: inode %lu, logical"
+		  "block %llu, max_blocks %u, flags %d, allocated %u",
+		  inode->i_ino, (unsigned long long)iblock, max_blocks,
+		  flags, allocated);
+	ext4_ext_show_leaf(inode, path);
+
+	/* DIO get_block() before submit the IO, split the extent */
+	if (flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT) {
+		ret = ext4_split_unwritten_extents(handle,
+						inode, path, iblock,
+						max_blocks, flags);
+		/* flag the io_end struct that we need convert when IO done */
+		if (io)
+			io->flag = DIO_AIO_UNWRITTEN;
+		goto out;
+	}
+	/* DIO end_io complete, convert the filled extent to written */
+	if (flags == EXT4_GET_BLOCKS_DIO_CONVERT_EXT) {
+		ret = ext4_convert_unwritten_extents_dio(handle, inode,
+							path);
+		goto out2;
+	}
+	/* buffered IO case */
+	/*
+	 * repeat fallocate creation request
+	 * we already have an unwritten extent
+	 */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
+		goto map_out;
+
+	/* buffered READ or buffered write_begin() lookup */
+	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
+		/*
+		 * We have blocks reserved already.  We
+		 * return allocated blocks so that delalloc
+		 * won't do block reservation for us.  But
+		 * the buffer head will be unmapped so that
+		 * a read from the block returns 0s.
+		 */
+		set_buffer_unwritten(bh_result);
+		goto out1;
+	}
+
+	/* buffered write, writepage time, convert*/
+	ret = ext4_ext_convert_to_initialized(handle, inode,
+						path, iblock,
+						max_blocks);
+out:
+	if (ret <= 0) {
+		err = ret;
+		goto out2;
+	} else
+		allocated = ret;
+	set_buffer_new(bh_result);
+map_out:
+	set_buffer_mapped(bh_result);
+out1:
+	if (allocated > max_blocks)
+		allocated = max_blocks;
+	ext4_ext_show_leaf(inode, path);
+	bh_result->b_bdev = inode->i_sb->s_bdev;
+	bh_result->b_blocknr = newblock;
+out2:
+	if (path) {
+		ext4_ext_drop_refs(path);
+		kfree(path);
+	}
+	return err ? err : allocated;
+}
+/*
  * Block allocation/map/preallocation routine for extents based files
  *
  *
@@ -2814,6 +3136,7 @@
 	int err = 0, depth, ret, cache_type;
 	unsigned int allocated = 0;
 	struct ext4_allocation_request ar;
+	ext4_io_end_t *io = EXT4_I(inode)->cur_aio_dio;
 
 	__clear_bit(BH_New, &bh_result->b_state);
 	ext_debug("blocks %u/%u requested for inode %lu\n",
@@ -2889,33 +3212,10 @@
 							EXT4_EXT_CACHE_EXTENT);
 				goto out;
 			}
-			if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)
-				goto out;
-			if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
-				if (allocated > max_blocks)
-					allocated = max_blocks;
-				/*
-				 * We have blocks reserved already.  We
-				 * return allocated blocks so that delalloc
-				 * won't do block reservation for us.  But
-				 * the buffer head will be unmapped so that
-				 * a read from the block returns 0s.
-				 */
-				set_buffer_unwritten(bh_result);
-				bh_result->b_bdev = inode->i_sb->s_bdev;
-				bh_result->b_blocknr = newblock;
-				goto out2;
-			}
-
-			ret = ext4_ext_convert_to_initialized(handle, inode,
-								path, iblock,
-								max_blocks);
-			if (ret <= 0) {
-				err = ret;
-				goto out2;
-			} else
-				allocated = ret;
-			goto outnew;
+			ret = ext4_ext_handle_uninitialized_extents(handle,
+					inode, iblock, max_blocks, path,
+					flags, allocated, bh_result, newblock);
+			return ret;
 		}
 	}
 
@@ -2986,9 +3286,21 @@
 	/* try to insert new extent into found leaf and return */
 	ext4_ext_store_pblock(&newex, newblock);
 	newex.ee_len = cpu_to_le16(ar.len);
-	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT)  /* Mark uninitialized */
+	/* Mark uninitialized */
+	if (flags & EXT4_GET_BLOCKS_UNINIT_EXT){
 		ext4_ext_mark_uninitialized(&newex);
-	err = ext4_ext_insert_extent(handle, inode, path, &newex);
+		/*
+		 * io_end structure was created for every async
+		 * direct IO write to the middle of the file.
+		 * To avoid unecessary convertion for every aio dio rewrite
+		 * to the mid of file, here we flag the IO that is really
+		 * need the convertion.
+		 *
+		 */
+		if (io && flags == EXT4_GET_BLOCKS_DIO_CREATE_EXT)
+			io->flag = DIO_AIO_UNWRITTEN;
+	}
+	err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
 	if (err) {
 		/* free data blocks we just allocated */
 		/* not a good idea to call discard here directly,
@@ -3002,7 +3314,6 @@
 	/* previous routine could use block we allocated */
 	newblock = ext_pblock(&newex);
 	allocated = ext4_ext_get_actual_len(&newex);
-outnew:
 	set_buffer_new(bh_result);
 
 	/* Cache only when it is _not_ an uninitialized extent */
@@ -3201,6 +3512,63 @@
 }
 
 /*
+ * This function convert a range of blocks to written extents
+ * The caller of this function will pass the start offset and the size.
+ * all unwritten extents within this range will be converted to
+ * written extents.
+ *
+ * This function is called from the direct IO end io call back
+ * function, to convert the fallocated extents after IO is completed.
+ */
+int ext4_convert_unwritten_extents(struct inode *inode, loff_t offset,
+				    loff_t len)
+{
+	handle_t *handle;
+	ext4_lblk_t block;
+	unsigned int max_blocks;
+	int ret = 0;
+	int ret2 = 0;
+	struct buffer_head map_bh;
+	unsigned int credits, blkbits = inode->i_blkbits;
+
+	block = offset >> blkbits;
+	/*
+	 * We can't just convert len to max_blocks because
+	 * If blocksize = 4096 offset = 3072 and len = 2048
+	 */
+	max_blocks = (EXT4_BLOCK_ALIGN(len + offset, blkbits) >> blkbits)
+							- block;
+	/*
+	 * credits to insert 1 extent into extent tree
+	 */
+	credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	while (ret >= 0 && ret < max_blocks) {
+		block = block + ret;
+		max_blocks = max_blocks - ret;
+		handle = ext4_journal_start(inode, credits);
+		if (IS_ERR(handle)) {
+			ret = PTR_ERR(handle);
+			break;
+		}
+		map_bh.b_state = 0;
+		ret = ext4_get_blocks(handle, inode, block,
+				      max_blocks, &map_bh,
+				      EXT4_GET_BLOCKS_DIO_CONVERT_EXT);
+		if (ret <= 0) {
+			WARN_ON(ret <= 0);
+			printk(KERN_ERR "%s: ext4_ext_get_blocks "
+				    "returned error inode#%lu, block=%u, "
+				    "max_blocks=%u", __func__,
+				    inode->i_ino, block, max_blocks);
+		}
+		ext4_mark_inode_dirty(handle, inode);
+		ret2 = ext4_journal_stop(handle);
+		if (ret <= 0 || ret2 )
+			break;
+	}
+	return ret > 0 ? ret2 : ret;
+}
+/*
  * Callback function called for each extent to gather FIEMAP information.
  */
 static int ext4_ext_fiemap_cb(struct inode *inode, struct ext4_ext_path *path,
diff --git a/fs/ext4/file.c b/fs/ext4/file.c
index 5ca3eca..9630583 100644
--- a/fs/ext4/file.c
+++ b/fs/ext4/file.c
@@ -81,7 +81,7 @@
 	return generic_file_aio_write(iocb, iov, nr_segs, pos);
 }
 
-static struct vm_operations_struct ext4_file_vm_ops = {
+static const struct vm_operations_struct ext4_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite   = ext4_page_mkwrite,
 };
diff --git a/fs/ext4/fsync.c b/fs/ext4/fsync.c
index 0747574..2b15312 100644
--- a/fs/ext4/fsync.c
+++ b/fs/ext4/fsync.c
@@ -44,6 +44,8 @@
  *
  * What we do is just kick off a commit and wait on it.  This will snapshot the
  * inode to disk.
+ *
+ * i_mutex lock is held when entering and exiting this function
  */
 
 int ext4_sync_file(struct file *file, struct dentry *dentry, int datasync)
@@ -56,6 +58,9 @@
 
 	trace_ext4_sync_file(file, dentry, datasync);
 
+	ret = flush_aio_dio_completed_IO(inode);
+	if (ret < 0)
+		goto out;
 	/*
 	 * data=writeback:
 	 *  The caller's filemap_fdatawrite()/wait will sync the data.
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 064746f..5c5bc5d 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -37,6 +37,7 @@
 #include <linux/namei.h>
 #include <linux/uio.h>
 #include <linux/bio.h>
+#include <linux/workqueue.h>
 
 #include "ext4_jbd2.h"
 #include "xattr.h"
@@ -1145,6 +1146,64 @@
 }
 
 /*
+ * Return the number of contiguous dirty pages in a given inode
+ * starting at page frame idx.
+ */
+static pgoff_t ext4_num_dirty_pages(struct inode *inode, pgoff_t idx,
+				    unsigned int max_pages)
+{
+	struct address_space *mapping = inode->i_mapping;
+	pgoff_t	index;
+	struct pagevec pvec;
+	pgoff_t num = 0;
+	int i, nr_pages, done = 0;
+
+	if (max_pages == 0)
+		return 0;
+	pagevec_init(&pvec, 0);
+	while (!done) {
+		index = idx;
+		nr_pages = pagevec_lookup_tag(&pvec, mapping, &index,
+					      PAGECACHE_TAG_DIRTY,
+					      (pgoff_t)PAGEVEC_SIZE);
+		if (nr_pages == 0)
+			break;
+		for (i = 0; i < nr_pages; i++) {
+			struct page *page = pvec.pages[i];
+			struct buffer_head *bh, *head;
+
+			lock_page(page);
+			if (unlikely(page->mapping != mapping) ||
+			    !PageDirty(page) ||
+			    PageWriteback(page) ||
+			    page->index != idx) {
+				done = 1;
+				unlock_page(page);
+				break;
+			}
+			if (page_has_buffers(page)) {
+				bh = head = page_buffers(page);
+				do {
+					if (!buffer_delay(bh) &&
+					    !buffer_unwritten(bh))
+						done = 1;
+					bh = bh->b_this_page;
+				} while (!done && (bh != head));
+			}
+			unlock_page(page);
+			if (done)
+				break;
+			idx++;
+			num++;
+			if (num >= max_pages)
+				break;
+		}
+		pagevec_release(&pvec);
+	}
+	return num;
+}
+
+/*
  * The ext4_get_blocks() function tries to look up the requested blocks,
  * and returns if the blocks are already mapped.
  *
@@ -1175,6 +1234,9 @@
 	clear_buffer_mapped(bh);
 	clear_buffer_unwritten(bh);
 
+	ext_debug("ext4_get_blocks(): inode %lu, flag %d, max_blocks %u,"
+		  "logical block %lu\n", inode->i_ino, flags, max_blocks,
+		  (unsigned long)block);
 	/*
 	 * Try to see if we can get the block without requesting a new
 	 * file system block.
@@ -1796,11 +1858,11 @@
 
 	if (ext4_claim_free_blocks(sbi, total)) {
 		spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+		vfs_dq_release_reservation_block(inode, total);
 		if (ext4_should_retry_alloc(inode->i_sb, &retries)) {
 			yield();
 			goto repeat;
 		}
-		vfs_dq_release_reservation_block(inode, total);
 		return -ENOSPC;
 	}
 	EXT4_I(inode)->i_reserved_data_blocks += nrblocks;
@@ -2092,18 +2154,18 @@
 static void ext4_print_free_blocks(struct inode *inode)
 {
 	struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
-	printk(KERN_EMERG "Total free blocks count %lld\n",
-			ext4_count_free_blocks(inode->i_sb));
-	printk(KERN_EMERG "Free/Dirty block details\n");
-	printk(KERN_EMERG "free_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_freeblocks_counter));
-	printk(KERN_EMERG "dirty_blocks=%lld\n",
-			(long long)percpu_counter_sum(&sbi->s_dirtyblocks_counter));
-	printk(KERN_EMERG "Block reservation details\n");
-	printk(KERN_EMERG "i_reserved_data_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_data_blocks);
-	printk(KERN_EMERG "i_reserved_meta_blocks=%u\n",
-			EXT4_I(inode)->i_reserved_meta_blocks);
+	printk(KERN_CRIT "Total free blocks count %lld\n",
+	       ext4_count_free_blocks(inode->i_sb));
+	printk(KERN_CRIT "Free/Dirty block details\n");
+	printk(KERN_CRIT "free_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_freeblocks_counter));
+	printk(KERN_CRIT "dirty_blocks=%lld\n",
+	       (long long) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
+	printk(KERN_CRIT "Block reservation details\n");
+	printk(KERN_CRIT "i_reserved_data_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_data_blocks);
+	printk(KERN_CRIT "i_reserved_meta_blocks=%u\n",
+	       EXT4_I(inode)->i_reserved_meta_blocks);
 	return;
 }
 
@@ -2189,14 +2251,14 @@
 		 * writepage and writepages will again try to write
 		 * the same.
 		 */
-		printk(KERN_EMERG "%s block allocation failed for inode %lu "
-				  "at logical offset %llu with max blocks "
-				  "%zd with error %d\n",
-				  __func__, mpd->inode->i_ino,
-				  (unsigned long long)next,
-				  mpd->b_size >> mpd->inode->i_blkbits, err);
-		printk(KERN_EMERG "This should not happen.!! "
-					"Data will be lost\n");
+		ext4_msg(mpd->inode->i_sb, KERN_CRIT,
+			 "delayed block allocation failed for inode %lu at "
+			 "logical offset %llu with max blocks %zd with "
+			 "error %d\n", mpd->inode->i_ino,
+			 (unsigned long long) next,
+			 mpd->b_size >> mpd->inode->i_blkbits, err);
+		printk(KERN_CRIT "This should not happen!!  "
+		       "Data will be lost\n");
 		if (err == -ENOSPC) {
 			ext4_print_free_blocks(mpd->inode);
 		}
@@ -2743,8 +2805,10 @@
 	int no_nrwrite_index_update;
 	int pages_written = 0;
 	long pages_skipped;
+	unsigned int max_pages;
 	int range_cyclic, cycled = 1, io_done = 0;
-	int needed_blocks, ret = 0, nr_to_writebump = 0;
+	int needed_blocks, ret = 0;
+	long desired_nr_to_write, nr_to_writebump = 0;
 	loff_t range_start = wbc->range_start;
 	struct ext4_sb_info *sbi = EXT4_SB(mapping->host->i_sb);
 
@@ -2771,16 +2835,6 @@
 	if (unlikely(sbi->s_mount_flags & EXT4_MF_FS_ABORTED))
 		return -EROFS;
 
-	/*
-	 * Make sure nr_to_write is >= sbi->s_mb_stream_request
-	 * This make sure small files blocks are allocated in
-	 * single attempt. This ensure that small files
-	 * get less fragmented.
-	 */
-	if (wbc->nr_to_write < sbi->s_mb_stream_request) {
-		nr_to_writebump = sbi->s_mb_stream_request - wbc->nr_to_write;
-		wbc->nr_to_write = sbi->s_mb_stream_request;
-	}
 	if (wbc->range_start == 0 && wbc->range_end == LLONG_MAX)
 		range_whole = 1;
 
@@ -2795,6 +2849,36 @@
 	} else
 		index = wbc->range_start >> PAGE_CACHE_SHIFT;
 
+	/*
+	 * This works around two forms of stupidity.  The first is in
+	 * the writeback code, which caps the maximum number of pages
+	 * written to be 1024 pages.  This is wrong on multiple
+	 * levels; different architectues have a different page size,
+	 * which changes the maximum amount of data which gets
+	 * written.  Secondly, 4 megabytes is way too small.  XFS
+	 * forces this value to be 16 megabytes by multiplying
+	 * nr_to_write parameter by four, and then relies on its
+	 * allocator to allocate larger extents to make them
+	 * contiguous.  Unfortunately this brings us to the second
+	 * stupidity, which is that ext4's mballoc code only allocates
+	 * at most 2048 blocks.  So we force contiguous writes up to
+	 * the number of dirty blocks in the inode, or
+	 * sbi->max_writeback_mb_bump whichever is smaller.
+	 */
+	max_pages = sbi->s_max_writeback_mb_bump << (20 - PAGE_CACHE_SHIFT);
+	if (!range_cyclic && range_whole)
+		desired_nr_to_write = wbc->nr_to_write * 8;
+	else
+		desired_nr_to_write = ext4_num_dirty_pages(inode, index,
+							   max_pages);
+	if (desired_nr_to_write > max_pages)
+		desired_nr_to_write = max_pages;
+
+	if (wbc->nr_to_write < desired_nr_to_write) {
+		nr_to_writebump = desired_nr_to_write - wbc->nr_to_write;
+		wbc->nr_to_write = desired_nr_to_write;
+	}
+
 	mpd.wbc = wbc;
 	mpd.inode = mapping->host;
 
@@ -2822,10 +2906,9 @@
 		handle = ext4_journal_start(inode, needed_blocks);
 		if (IS_ERR(handle)) {
 			ret = PTR_ERR(handle);
-			printk(KERN_CRIT "%s: jbd2_start: "
+			ext4_msg(inode->i_sb, KERN_CRIT, "%s: jbd2_start: "
 			       "%ld pages, ino %lu; err %d\n", __func__,
 				wbc->nr_to_write, inode->i_ino, ret);
-			dump_stack();
 			goto out_writepages;
 		}
 
@@ -2897,9 +2980,10 @@
 		goto retry;
 	}
 	if (pages_skipped != wbc->pages_skipped)
-		printk(KERN_EMERG "This should not happen leaving %s "
-				"with nr_to_write = %ld ret = %d\n",
-				__func__, wbc->nr_to_write, ret);
+		ext4_msg(inode->i_sb, KERN_CRIT,
+			 "This should not happen leaving %s "
+			 "with nr_to_write = %ld ret = %d\n",
+			 __func__, wbc->nr_to_write, ret);
 
 	/* Update index */
 	index += pages_written;
@@ -2914,7 +2998,8 @@
 out_writepages:
 	if (!no_nrwrite_index_update)
 		wbc->no_nrwrite_index_update = 0;
-	wbc->nr_to_write -= nr_to_writebump;
+	if (wbc->nr_to_write > nr_to_writebump)
+		wbc->nr_to_write -= nr_to_writebump;
 	wbc->range_start = range_start;
 	trace_ext4_da_writepages_result(inode, wbc, ret, pages_written);
 	return ret;
@@ -3272,6 +3357,8 @@
 }
 
 /*
+ * O_DIRECT for ext3 (or indirect map) based files
+ *
  * If the O_DIRECT write will extend the file then add this inode to the
  * orphan list.  So recovery will truncate it back to the original size
  * if the machine crashes during the write.
@@ -3280,7 +3367,7 @@
  * crashes then stale disk data _may_ be exposed inside the file. But current
  * VFS code falls back into buffered path in that case so we are safe.
  */
-static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+static ssize_t ext4_ind_direct_IO(int rw, struct kiocb *iocb,
 			      const struct iovec *iov, loff_t offset,
 			      unsigned long nr_segs)
 {
@@ -3291,6 +3378,7 @@
 	ssize_t ret;
 	int orphan = 0;
 	size_t count = iov_length(iov, nr_segs);
+	int retries = 0;
 
 	if (rw == WRITE) {
 		loff_t final_size = offset + count;
@@ -3313,9 +3401,12 @@
 		}
 	}
 
+retry:
 	ret = blockdev_direct_IO(rw, iocb, inode, inode->i_sb->s_bdev, iov,
 				 offset, nr_segs,
 				 ext4_get_block, NULL);
+	if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
+		goto retry;
 
 	if (orphan) {
 		int err;
@@ -3354,6 +3445,359 @@
 	return ret;
 }
 
+/* Maximum number of blocks we map for direct IO at once. */
+
+static int ext4_get_block_dio_write(struct inode *inode, sector_t iblock,
+		   struct buffer_head *bh_result, int create)
+{
+	handle_t *handle = NULL;
+	int ret = 0;
+	unsigned max_blocks = bh_result->b_size >> inode->i_blkbits;
+	int dio_credits;
+
+	ext4_debug("ext4_get_block_dio_write: inode %lu, create flag %d\n",
+		   inode->i_ino, create);
+	/*
+	 * DIO VFS code passes create = 0 flag for write to
+	 * the middle of file. It does this to avoid block
+	 * allocation for holes, to prevent expose stale data
+	 * out when there is parallel buffered read (which does
+	 * not hold the i_mutex lock) while direct IO write has
+	 * not completed. DIO request on holes finally falls back
+	 * to buffered IO for this reason.
+	 *
+	 * For ext4 extent based file, since we support fallocate,
+	 * new allocated extent as uninitialized, for holes, we
+	 * could fallocate blocks for holes, thus parallel
+	 * buffered IO read will zero out the page when read on
+	 * a hole while parallel DIO write to the hole has not completed.
+	 *
+	 * when we come here, we know it's a direct IO write to
+	 * to the middle of file (<i_size)
+	 * so it's safe to override the create flag from VFS.
+	 */
+	create = EXT4_GET_BLOCKS_DIO_CREATE_EXT;
+
+	if (max_blocks > DIO_MAX_BLOCKS)
+		max_blocks = DIO_MAX_BLOCKS;
+	dio_credits = ext4_chunk_trans_blocks(inode, max_blocks);
+	handle = ext4_journal_start(inode, dio_credits);
+	if (IS_ERR(handle)) {
+		ret = PTR_ERR(handle);
+		goto out;
+	}
+	ret = ext4_get_blocks(handle, inode, iblock, max_blocks, bh_result,
+			      create);
+	if (ret > 0) {
+		bh_result->b_size = (ret << inode->i_blkbits);
+		ret = 0;
+	}
+	ext4_journal_stop(handle);
+out:
+	return ret;
+}
+
+static void ext4_free_io_end(ext4_io_end_t *io)
+{
+	BUG_ON(!io);
+	iput(io->inode);
+	kfree(io);
+}
+static void dump_aio_dio_list(struct inode * inode)
+{
+#ifdef	EXT4_DEBUG
+	struct list_head *cur, *before, *after;
+	ext4_io_end_t *io, *io0, *io1;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		ext4_debug("inode %lu aio dio list is empty\n", inode->i_ino);
+		return;
+	}
+
+	ext4_debug("Dump inode %lu aio_dio_completed_IO list \n", inode->i_ino);
+	list_for_each_entry(io, &EXT4_I(inode)->i_aio_dio_complete_list, list){
+		cur = &io->list;
+		before = cur->prev;
+		io0 = container_of(before, ext4_io_end_t, list);
+		after = cur->next;
+		io1 = container_of(after, ext4_io_end_t, list);
+
+		ext4_debug("io 0x%p from inode %lu,prev 0x%p,next 0x%p\n",
+			    io, inode->i_ino, io0, io1);
+	}
+#endif
+}
+
+/*
+ * check a range of space and convert unwritten extents to written.
+ */
+static int ext4_end_aio_dio_nolock(ext4_io_end_t *io)
+{
+	struct inode *inode = io->inode;
+	loff_t offset = io->offset;
+	size_t size = io->size;
+	int ret = 0;
+
+	ext4_debug("end_aio_dio_onlock: io 0x%p from inode %lu,list->next 0x%p,"
+		   "list->prev 0x%p\n",
+	           io, inode->i_ino, io->list.next, io->list.prev);
+
+	if (list_empty(&io->list))
+		return ret;
+
+	if (io->flag != DIO_AIO_UNWRITTEN)
+		return ret;
+
+	if (offset + size <= i_size_read(inode))
+		ret = ext4_convert_unwritten_extents(inode, offset, size);
+
+	if (ret < 0) {
+		printk(KERN_EMERG "%s: failed to convert unwritten"
+			"extents to written extents, error is %d"
+			" io is still on inode %lu aio dio list\n",
+                       __func__, ret, inode->i_ino);
+		return ret;
+	}
+
+	/* clear the DIO AIO unwritten flag */
+	io->flag = 0;
+	return ret;
+}
+/*
+ * work on completed aio dio IO, to convert unwritten extents to extents
+ */
+static void ext4_end_aio_dio_work(struct work_struct *work)
+{
+	ext4_io_end_t *io  = container_of(work, ext4_io_end_t, work);
+	struct inode *inode = io->inode;
+	int ret = 0;
+
+	mutex_lock(&inode->i_mutex);
+	ret = ext4_end_aio_dio_nolock(io);
+	if (ret >= 0) {
+		if (!list_empty(&io->list))
+			list_del_init(&io->list);
+		ext4_free_io_end(io);
+	}
+	mutex_unlock(&inode->i_mutex);
+}
+/*
+ * This function is called from ext4_sync_file().
+ *
+ * When AIO DIO IO is completed, the work to convert unwritten
+ * extents to written is queued on workqueue but may not get immediately
+ * scheduled. When fsync is called, we need to ensure the
+ * conversion is complete before fsync returns.
+ * The inode keeps track of a list of completed AIO from DIO path
+ * that might needs to do the conversion. This function walks through
+ * the list and convert the related unwritten extents to written.
+ */
+int flush_aio_dio_completed_IO(struct inode *inode)
+{
+	ext4_io_end_t *io;
+	int ret = 0;
+	int ret2 = 0;
+
+	if (list_empty(&EXT4_I(inode)->i_aio_dio_complete_list))
+		return ret;
+
+	dump_aio_dio_list(inode);
+	while (!list_empty(&EXT4_I(inode)->i_aio_dio_complete_list)){
+		io = list_entry(EXT4_I(inode)->i_aio_dio_complete_list.next,
+				ext4_io_end_t, list);
+		/*
+		 * Calling ext4_end_aio_dio_nolock() to convert completed
+		 * IO to written.
+		 *
+		 * When ext4_sync_file() is called, run_queue() may already
+		 * about to flush the work corresponding to this io structure.
+		 * It will be upset if it founds the io structure related
+		 * to the work-to-be schedule is freed.
+		 *
+		 * Thus we need to keep the io structure still valid here after
+		 * convertion finished. The io structure has a flag to
+		 * avoid double converting from both fsync and background work
+		 * queue work.
+		 */
+		ret = ext4_end_aio_dio_nolock(io);
+		if (ret < 0)
+			ret2 = ret;
+		else
+			list_del_init(&io->list);
+	}
+	return (ret2 < 0) ? ret2 : 0;
+}
+
+static ext4_io_end_t *ext4_init_io_end (struct inode *inode)
+{
+	ext4_io_end_t *io = NULL;
+
+	io = kmalloc(sizeof(*io), GFP_NOFS);
+
+	if (io) {
+		igrab(inode);
+		io->inode = inode;
+		io->flag = 0;
+		io->offset = 0;
+		io->size = 0;
+		io->error = 0;
+		INIT_WORK(&io->work, ext4_end_aio_dio_work);
+		INIT_LIST_HEAD(&io->list);
+	}
+
+	return io;
+}
+
+static void ext4_end_io_dio(struct kiocb *iocb, loff_t offset,
+			    ssize_t size, void *private)
+{
+        ext4_io_end_t *io_end = iocb->private;
+	struct workqueue_struct *wq;
+
+	ext_debug("ext4_end_io_dio(): io_end 0x%p"
+		  "for inode %lu, iocb 0x%p, offset %llu, size %llu\n",
+ 		  iocb->private, io_end->inode->i_ino, iocb, offset,
+		  size);
+	/* if not async direct IO or dio with 0 bytes write, just return */
+	if (!io_end || !size)
+		return;
+
+	/* if not aio dio with unwritten extents, just free io and return */
+	if (io_end->flag != DIO_AIO_UNWRITTEN){
+		ext4_free_io_end(io_end);
+		iocb->private = NULL;
+		return;
+	}
+
+	io_end->offset = offset;
+	io_end->size = size;
+	wq = EXT4_SB(io_end->inode->i_sb)->dio_unwritten_wq;
+
+	/* queue the work to convert unwritten extents to written */
+	queue_work(wq, &io_end->work);
+
+	/* Add the io_end to per-inode completed aio dio list*/
+	list_add_tail(&io_end->list,
+		 &EXT4_I(io_end->inode)->i_aio_dio_complete_list);
+	iocb->private = NULL;
+}
+/*
+ * For ext4 extent files, ext4 will do direct-io write to holes,
+ * preallocated extents, and those write extend the file, no need to
+ * fall back to buffered IO.
+ *
+ * For holes, we fallocate those blocks, mark them as unintialized
+ * If those blocks were preallocated, we mark sure they are splited, but
+ * still keep the range to write as unintialized.
+ *
+ * The unwrritten extents will be converted to written when DIO is completed.
+ * For async direct IO, since the IO may still pending when return, we
+ * set up an end_io call back function, which will do the convertion
+ * when async direct IO completed.
+ *
+ * If the O_DIRECT write will extend the file then add this inode to the
+ * orphan list.  So recovery will truncate it back to the original size
+ * if the machine crashes during the write.
+ *
+ */
+static ssize_t ext4_ext_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+	ssize_t ret;
+	size_t count = iov_length(iov, nr_segs);
+
+	loff_t final_size = offset + count;
+	if (rw == WRITE && final_size <= inode->i_size) {
+		/*
+ 		 * We could direct write to holes and fallocate.
+		 *
+ 		 * Allocated blocks to fill the hole are marked as uninitialized
+ 		 * to prevent paralel buffered read to expose the stale data
+ 		 * before DIO complete the data IO.
+		 *
+ 		 * As to previously fallocated extents, ext4 get_block
+ 		 * will just simply mark the buffer mapped but still
+ 		 * keep the extents uninitialized.
+ 		 *
+		 * for non AIO case, we will convert those unwritten extents
+		 * to written after return back from blockdev_direct_IO.
+		 *
+		 * for async DIO, the conversion needs to be defered when
+		 * the IO is completed. The ext4 end_io callback function
+		 * will be called to take care of the conversion work.
+		 * Here for async case, we allocate an io_end structure to
+		 * hook to the iocb.
+ 		 */
+		iocb->private = NULL;
+		EXT4_I(inode)->cur_aio_dio = NULL;
+		if (!is_sync_kiocb(iocb)) {
+			iocb->private = ext4_init_io_end(inode);
+			if (!iocb->private)
+				return -ENOMEM;
+			/*
+			 * we save the io structure for current async
+			 * direct IO, so that later ext4_get_blocks()
+			 * could flag the io structure whether there
+			 * is a unwritten extents needs to be converted
+			 * when IO is completed.
+			 */
+			EXT4_I(inode)->cur_aio_dio = iocb->private;
+		}
+
+		ret = blockdev_direct_IO(rw, iocb, inode,
+					 inode->i_sb->s_bdev, iov,
+					 offset, nr_segs,
+					 ext4_get_block_dio_write,
+					 ext4_end_io_dio);
+		if (iocb->private)
+			EXT4_I(inode)->cur_aio_dio = NULL;
+		/*
+		 * The io_end structure takes a reference to the inode,
+		 * that structure needs to be destroyed and the
+		 * reference to the inode need to be dropped, when IO is
+		 * complete, even with 0 byte write, or failed.
+		 *
+		 * In the successful AIO DIO case, the io_end structure will be
+		 * desctroyed and the reference to the inode will be dropped
+		 * after the end_io call back function is called.
+		 *
+		 * In the case there is 0 byte write, or error case, since
+		 * VFS direct IO won't invoke the end_io call back function,
+		 * we need to free the end_io structure here.
+		 */
+		if (ret != -EIOCBQUEUED && ret <= 0 && iocb->private) {
+			ext4_free_io_end(iocb->private);
+			iocb->private = NULL;
+		} else if (ret > 0)
+			/*
+			 * for non AIO case, since the IO is already
+			 * completed, we could do the convertion right here
+			 */
+			ret = ext4_convert_unwritten_extents(inode,
+								offset, ret);
+		return ret;
+	}
+
+	/* for write the the end of file case, we fall back to old way */
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
+static ssize_t ext4_direct_IO(int rw, struct kiocb *iocb,
+			      const struct iovec *iov, loff_t offset,
+			      unsigned long nr_segs)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = file->f_mapping->host;
+
+	if (EXT4_I(inode)->i_flags & EXT4_EXTENTS_FL)
+		return ext4_ext_direct_IO(rw, iocb, iov, offset, nr_segs);
+
+	return ext4_ind_direct_IO(rw, iocb, iov, offset, nr_segs);
+}
+
 /*
  * Pages can be marked dirty completely asynchronously from ext4's journalling
  * activity.  By filemap_sync_pte(), try_to_unmap_one(), etc.  We cannot do
@@ -4551,8 +4995,7 @@
  */
 static int ext4_do_update_inode(handle_t *handle,
 				struct inode *inode,
-				struct ext4_iloc *iloc,
-				int do_sync)
+				struct ext4_iloc *iloc)
 {
 	struct ext4_inode *raw_inode = ext4_raw_inode(iloc);
 	struct ext4_inode_info *ei = EXT4_I(inode);
@@ -4653,22 +5096,10 @@
 		raw_inode->i_extra_isize = cpu_to_le16(ei->i_extra_isize);
 	}
 
-	/*
-	 * If we're not using a journal and we were called from
-	 * ext4_write_inode() to sync the inode (making do_sync true),
-	 * we can just use sync_dirty_buffer() directly to do our dirty
-	 * work.  Testing s_journal here is a bit redundant but it's
-	 * worth it to avoid potential future trouble.
-	 */
-	if (EXT4_SB(inode->i_sb)->s_journal == NULL && do_sync) {
-		BUFFER_TRACE(bh, "call sync_dirty_buffer");
-		sync_dirty_buffer(bh);
-	} else {
-		BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
-		rc = ext4_handle_dirty_metadata(handle, inode, bh);
-		if (!err)
-			err = rc;
-	}
+	BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
+	rc = ext4_handle_dirty_metadata(handle, inode, bh);
+	if (!err)
+		err = rc;
 	ei->i_state &= ~EXT4_STATE_NEW;
 
 out_brelse:
@@ -4736,8 +5167,16 @@
 		err = ext4_get_inode_loc(inode, &iloc);
 		if (err)
 			return err;
-		err = ext4_do_update_inode(EXT4_NOJOURNAL_HANDLE,
-					   inode, &iloc, wait);
+		if (wait)
+			sync_dirty_buffer(iloc.bh);
+		if (buffer_req(iloc.bh) && !buffer_uptodate(iloc.bh)) {
+			ext4_error(inode->i_sb, __func__,
+				   "IO error syncing inode, "
+				   "inode=%lu, block=%llu",
+				   inode->i_ino,
+				   (unsigned long long)iloc.bh->b_blocknr);
+			err = -EIO;
+		}
 	}
 	return err;
 }
@@ -5033,7 +5472,7 @@
 	get_bh(iloc->bh);
 
 	/* ext4_do_update_inode() does jbd2_journal_dirty_metadata */
-	err = ext4_do_update_inode(handle, inode, iloc, 0);
+	err = ext4_do_update_inode(handle, inode, iloc);
 	put_bh(iloc->bh);
 	return err;
 }
@@ -5177,27 +5616,14 @@
  */
 void ext4_dirty_inode(struct inode *inode)
 {
-	handle_t *current_handle = ext4_journal_current_handle();
 	handle_t *handle;
 
-	if (!ext4_handle_valid(current_handle)) {
-		ext4_mark_inode_dirty(current_handle, inode);
-		return;
-	}
-
 	handle = ext4_journal_start(inode, 2);
 	if (IS_ERR(handle))
 		goto out;
-	if (current_handle &&
-		current_handle->h_transaction != handle->h_transaction) {
-		/* This task has a transaction open against a different fs */
-		printk(KERN_EMERG "%s: transactions do not match!\n",
-		       __func__);
-	} else {
-		jbd_debug(5, "marking dirty.  outer handle=%p\n",
-				current_handle);
-		ext4_mark_inode_dirty(handle, inode);
-	}
+
+	ext4_mark_inode_dirty(handle, inode);
+
 	ext4_journal_stop(handle);
 out:
 	return;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index e9c6189..bba1282 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2096,207 +2096,6 @@
 	return err;
 }
 
-#ifdef EXT4_MB_HISTORY
-struct ext4_mb_proc_session {
-	struct ext4_mb_history *history;
-	struct super_block *sb;
-	int start;
-	int max;
-};
-
-static void *ext4_mb_history_skip_empty(struct ext4_mb_proc_session *s,
-					struct ext4_mb_history *hs,
-					int first)
-{
-	if (hs == s->history + s->max)
-		hs = s->history;
-	if (!first && hs == s->history + s->start)
-		return NULL;
-	while (hs->orig.fe_len == 0) {
-		hs++;
-		if (hs == s->history + s->max)
-			hs = s->history;
-		if (hs == s->history + s->start)
-			return NULL;
-	}
-	return hs;
-}
-
-static void *ext4_mb_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	hs = ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	if (!hs)
-		return NULL;
-	while (--l && (hs = ext4_mb_history_skip_empty(s, ++hs, 0)) != NULL);
-	return hs;
-}
-
-static void *ext4_mb_seq_history_next(struct seq_file *seq, void *v,
-				      loff_t *pos)
-{
-	struct ext4_mb_proc_session *s = seq->private;
-	struct ext4_mb_history *hs = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return ext4_mb_history_skip_empty(s, s->history + s->start, 1);
-	else
-		return ext4_mb_history_skip_empty(s, ++hs, 0);
-}
-
-static int ext4_mb_seq_history_show(struct seq_file *seq, void *v)
-{
-	char buf[25], buf2[25], buf3[25], *fmt;
-	struct ext4_mb_history *hs = v;
-
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-5s %-8s %-23s %-23s %-23s %-5s "
-				"%-5s %-2s %-6s %-5s %-5s %-6s\n",
-			  "pid", "inode", "original", "goal", "result", "found",
-			   "grps", "cr", "flags", "merge", "tail", "broken");
-		return 0;
-	}
-
-	if (hs->op == EXT4_MB_HISTORY_ALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s %-5u %-5u %-2u "
-			"0x%04x %-5s %-5u %-6u\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		sprintf(buf3, "%u/%d/%u@%u", hs->goal.fe_group,
-			hs->goal.fe_start, hs->goal.fe_len,
-			hs->goal.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, buf3, buf2,
-				hs->found, hs->groups, hs->cr, hs->flags,
-				hs->merged ? "M" : "", hs->tail,
-				hs->buddy ? 1 << hs->buddy : 0);
-	} else if (hs->op == EXT4_MB_HISTORY_PREALLOC) {
-		fmt = "%-5u %-8u %-23s %-23s %-23s\n";
-		sprintf(buf2, "%u/%d/%u@%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len,
-			hs->result.fe_logical);
-		sprintf(buf, "%u/%d/%u@%u", hs->orig.fe_group,
-			hs->orig.fe_start, hs->orig.fe_len,
-			hs->orig.fe_logical);
-		seq_printf(seq, fmt, hs->pid, hs->ino, buf, "", buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_DISCARD) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s discard\n",
-				hs->pid, hs->ino, buf2);
-	} else if (hs->op == EXT4_MB_HISTORY_FREE) {
-		sprintf(buf2, "%u/%d/%u", hs->result.fe_group,
-			hs->result.fe_start, hs->result.fe_len);
-		seq_printf(seq, "%-5u %-8u %-23s free\n",
-				hs->pid, hs->ino, buf2);
-	}
-	return 0;
-}
-
-static void ext4_mb_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations ext4_mb_seq_history_ops = {
-	.start  = ext4_mb_seq_history_start,
-	.next   = ext4_mb_seq_history_next,
-	.stop   = ext4_mb_seq_history_stop,
-	.show   = ext4_mb_seq_history_show,
-};
-
-static int ext4_mb_seq_history_open(struct inode *inode, struct file *file)
-{
-	struct super_block *sb = PDE(inode)->data;
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	struct ext4_mb_proc_session *s;
-	int rc;
-	int size;
-
-	if (unlikely(sbi->s_mb_history == NULL))
-		return -ENOMEM;
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	s->sb = sb;
-	size = sizeof(struct ext4_mb_history) * sbi->s_mb_history_max;
-	s->history = kmalloc(size, GFP_KERNEL);
-	if (s->history == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(s->history, sbi->s_mb_history, size);
-	s->max = sbi->s_mb_history_max;
-	s->start = sbi->s_mb_history_cur % s->max;
-	spin_unlock(&sbi->s_mb_history_lock);
-
-	rc = seq_open(file, &ext4_mb_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = (struct seq_file *)file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->history);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int ext4_mb_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	kfree(s->history);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static ssize_t ext4_mb_seq_history_write(struct file *file,
-				const char __user *buffer,
-				size_t count, loff_t *ppos)
-{
-	struct seq_file *seq = (struct seq_file *)file->private_data;
-	struct ext4_mb_proc_session *s = seq->private;
-	struct super_block *sb = s->sb;
-	char str[32];
-	int value;
-
-	if (count >= sizeof(str)) {
-		printk(KERN_ERR "EXT4-fs: %s string too long, max %u bytes\n",
-				"mb_history", (int)sizeof(str));
-		return -EOVERFLOW;
-	}
-
-	if (copy_from_user(str, buffer, count))
-		return -EFAULT;
-
-	value = simple_strtol(str, NULL, 0);
-	if (value < 0)
-		return -ERANGE;
-	EXT4_SB(sb)->s_mb_history_filter = value;
-
-	return count;
-}
-
-static const struct file_operations ext4_mb_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open		= ext4_mb_seq_history_open,
-	.read		= seq_read,
-	.write		= ext4_mb_seq_history_write,
-	.llseek		= seq_lseek,
-	.release	= ext4_mb_seq_history_release,
-};
-
 static void *ext4_mb_seq_groups_start(struct seq_file *seq, loff_t *pos)
 {
 	struct super_block *sb = seq->private;
@@ -2396,82 +2195,6 @@
 	.release	= seq_release,
 };
 
-static void ext4_mb_history_release(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-
-	if (sbi->s_proc != NULL) {
-		remove_proc_entry("mb_groups", sbi->s_proc);
-		if (sbi->s_mb_history_max)
-			remove_proc_entry("mb_history", sbi->s_proc);
-	}
-	kfree(sbi->s_mb_history);
-}
-
-static void ext4_mb_history_init(struct super_block *sb)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(sb);
-	int i;
-
-	if (sbi->s_proc != NULL) {
-		if (sbi->s_mb_history_max)
-			proc_create_data("mb_history", S_IRUGO, sbi->s_proc,
-					 &ext4_mb_seq_history_fops, sb);
-		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
-				 &ext4_mb_seq_groups_fops, sb);
-	}
-
-	sbi->s_mb_history_cur = 0;
-	spin_lock_init(&sbi->s_mb_history_lock);
-	i = sbi->s_mb_history_max * sizeof(struct ext4_mb_history);
-	sbi->s_mb_history = i ? kzalloc(i, GFP_KERNEL) : NULL;
-	/* if we can't allocate history, then we simple won't use it */
-}
-
-static noinline_for_stack void
-ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb);
-	struct ext4_mb_history h;
-
-	if (sbi->s_mb_history == NULL)
-		return;
-
-	if (!(ac->ac_op & sbi->s_mb_history_filter))
-		return;
-
-	h.op = ac->ac_op;
-	h.pid = current->pid;
-	h.ino = ac->ac_inode ? ac->ac_inode->i_ino : 0;
-	h.orig = ac->ac_o_ex;
-	h.result = ac->ac_b_ex;
-	h.flags = ac->ac_flags;
-	h.found = ac->ac_found;
-	h.groups = ac->ac_groups_scanned;
-	h.cr = ac->ac_criteria;
-	h.tail = ac->ac_tail;
-	h.buddy = ac->ac_buddy;
-	h.merged = 0;
-	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC) {
-		if (ac->ac_g_ex.fe_start == ac->ac_b_ex.fe_start &&
-				ac->ac_g_ex.fe_group == ac->ac_b_ex.fe_group)
-			h.merged = 1;
-		h.goal = ac->ac_g_ex;
-		h.result = ac->ac_f_ex;
-	}
-
-	spin_lock(&sbi->s_mb_history_lock);
-	memcpy(sbi->s_mb_history + sbi->s_mb_history_cur, &h, sizeof(h));
-	if (++sbi->s_mb_history_cur >= sbi->s_mb_history_max)
-		sbi->s_mb_history_cur = 0;
-	spin_unlock(&sbi->s_mb_history_lock);
-}
-
-#else
-#define ext4_mb_history_release(sb)
-#define ext4_mb_history_init(sb)
-#endif
-
 
 /* Create and initialize ext4_group_info data for the given group. */
 int ext4_mb_add_groupinfo(struct super_block *sb, ext4_group_t group,
@@ -2690,7 +2413,6 @@
 	sbi->s_mb_stats = MB_DEFAULT_STATS;
 	sbi->s_mb_stream_request = MB_DEFAULT_STREAM_THRESHOLD;
 	sbi->s_mb_order2_reqs = MB_DEFAULT_ORDER2_REQS;
-	sbi->s_mb_history_filter = EXT4_MB_HISTORY_DEFAULT;
 	sbi->s_mb_group_prealloc = MB_DEFAULT_GROUP_PREALLOC;
 
 	sbi->s_locality_groups = alloc_percpu(struct ext4_locality_group);
@@ -2708,12 +2430,12 @@
 		spin_lock_init(&lg->lg_prealloc_lock);
 	}
 
-	ext4_mb_history_init(sb);
+	if (sbi->s_proc)
+		proc_create_data("mb_groups", S_IRUGO, sbi->s_proc,
+				 &ext4_mb_seq_groups_fops, sb);
 
 	if (sbi->s_journal)
 		sbi->s_journal->j_commit_callback = release_blocks_on_commit;
-
-	printk(KERN_INFO "EXT4-fs: mballoc enabled\n");
 	return 0;
 }
 
@@ -2790,7 +2512,8 @@
 	}
 
 	free_percpu(sbi->s_locality_groups);
-	ext4_mb_history_release(sb);
+	if (sbi->s_proc)
+		remove_proc_entry("mb_groups", sbi->s_proc);
 
 	return 0;
 }
@@ -3276,7 +2999,10 @@
 			atomic_inc(&sbi->s_bal_breaks);
 	}
 
-	ext4_mb_store_history(ac);
+	if (ac->ac_op == EXT4_MB_HISTORY_ALLOC)
+		trace_ext4_mballoc_alloc(ac);
+	else
+		trace_ext4_mballoc_prealloc(ac);
 }
 
 /*
@@ -3776,7 +3502,6 @@
 	if (ac) {
 		ac->ac_sb = sb;
 		ac->ac_inode = pa->pa_inode;
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
 	}
 
 	while (bit < end) {
@@ -3796,7 +3521,7 @@
 			ac->ac_b_ex.fe_start = bit;
 			ac->ac_b_ex.fe_len = next - bit;
 			ac->ac_b_ex.fe_logical = 0;
-			ext4_mb_store_history(ac);
+			trace_ext4_mballoc_discard(ac);
 		}
 
 		trace_ext4_mb_release_inode_pa(ac, pa, grp_blk_start + bit,
@@ -3831,9 +3556,6 @@
 	ext4_group_t group;
 	ext4_grpblk_t bit;
 
-	if (ac)
-		ac->ac_op = EXT4_MB_HISTORY_DISCARD;
-
 	trace_ext4_mb_release_group_pa(ac, pa);
 	BUG_ON(pa->pa_deleted == 0);
 	ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit);
@@ -3848,7 +3570,7 @@
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = pa->pa_len;
 		ac->ac_b_ex.fe_logical = 0;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_discard(ac);
 	}
 
 	return 0;
@@ -4189,7 +3911,6 @@
 	size = ac->ac_o_ex.fe_logical + ac->ac_o_ex.fe_len;
 	isize = (i_size_read(ac->ac_inode) + ac->ac_sb->s_blocksize - 1)
 		>> bsbits;
-	size = max(size, isize);
 
 	if ((size == isize) &&
 	    !ext4_fs_is_busy(sbi) &&
@@ -4199,6 +3920,7 @@
 	}
 
 	/* don't use group allocation for large files */
+	size = max(size, isize);
 	if (size >= sbi->s_mb_stream_request) {
 		ac->ac_flags |= EXT4_MB_STREAM_ALLOC;
 		return;
@@ -4739,7 +4461,6 @@
 
 	ac = kmem_cache_alloc(ext4_ac_cachep, GFP_NOFS);
 	if (ac) {
-		ac->ac_op = EXT4_MB_HISTORY_FREE;
 		ac->ac_inode = inode;
 		ac->ac_sb = sb;
 	}
@@ -4806,7 +4527,7 @@
 		ac->ac_b_ex.fe_group = block_group;
 		ac->ac_b_ex.fe_start = bit;
 		ac->ac_b_ex.fe_len = count;
-		ext4_mb_store_history(ac);
+		trace_ext4_mballoc_free(ac);
 	}
 
 	err = ext4_mb_load_buddy(sb, block_group, &e4b);
diff --git a/fs/ext4/mballoc.h b/fs/ext4/mballoc.h
index 188d3d7..0ca8110 100644
--- a/fs/ext4/mballoc.h
+++ b/fs/ext4/mballoc.h
@@ -52,18 +52,8 @@
 #define mb_debug(n, fmt, a...)
 #endif
 
-/*
- * with EXT4_MB_HISTORY mballoc stores last N allocations in memory
- * and you can monitor it in /proc/fs/ext4/<dev>/mb_history
- */
-#define EXT4_MB_HISTORY
 #define EXT4_MB_HISTORY_ALLOC		1	/* allocation */
 #define EXT4_MB_HISTORY_PREALLOC	2	/* preallocated blocks used */
-#define EXT4_MB_HISTORY_DISCARD		4	/* preallocation discarded */
-#define EXT4_MB_HISTORY_FREE		8	/* free */
-
-#define EXT4_MB_HISTORY_DEFAULT		(EXT4_MB_HISTORY_ALLOC | \
-					 EXT4_MB_HISTORY_PREALLOC)
 
 /*
  * How long mballoc can look for a best extent (in found extents)
@@ -84,7 +74,7 @@
  * with 'ext4_mb_stats' allocator will collect stats that will be
  * shown at umount. The collecting costs though!
  */
-#define MB_DEFAULT_STATS		1
+#define MB_DEFAULT_STATS		0
 
 /*
  * files smaller than MB_DEFAULT_STREAM_THRESHOLD are served
@@ -217,22 +207,6 @@
 #define AC_STATUS_FOUND		2
 #define AC_STATUS_BREAK		3
 
-struct ext4_mb_history {
-	struct ext4_free_extent orig;	/* orig allocation */
-	struct ext4_free_extent goal;	/* goal allocation */
-	struct ext4_free_extent result;	/* result allocation */
-	unsigned pid;
-	unsigned ino;
-	__u16 found;	/* how many extents have been found */
-	__u16 groups;	/* how many groups have been scanned */
-	__u16 tail;	/* what tail broke some buddy */
-	__u16 buddy;	/* buddy the tail ^^^ broke */
-	__u16 flags;
-	__u8 cr:3;	/* which phase the result extent was found at */
-	__u8 op:4;
-	__u8 merged:1;
-};
-
 struct ext4_buddy {
 	struct page *bd_buddy_page;
 	void *bd_buddy;
@@ -247,13 +221,6 @@
 #define EXT4_MB_BITMAP(e4b)	((e4b)->bd_bitmap)
 #define EXT4_MB_BUDDY(e4b)	((e4b)->bd_buddy)
 
-#ifndef EXT4_MB_HISTORY
-static inline void ext4_mb_store_history(struct ext4_allocation_context *ac)
-{
-	return;
-}
-#endif
-
 #define in_range(b, first, len)	((b) >= (first) && (b) <= (first) + (len) - 1)
 
 static inline ext4_fsblk_t ext4_grp_offs_to_block(struct super_block *sb,
diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c
index bf519f2..a93d5b8 100644
--- a/fs/ext4/migrate.c
+++ b/fs/ext4/migrate.c
@@ -75,7 +75,7 @@
 				goto err_out;
 		}
 	}
-	retval = ext4_ext_insert_extent(handle, inode, path, &newext);
+	retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0);
 err_out:
 	if (path) {
 		ext4_ext_drop_refs(path);
diff --git a/fs/ext4/move_extent.c b/fs/ext4/move_extent.c
index c07a291..25b6b14 100644
--- a/fs/ext4/move_extent.c
+++ b/fs/ext4/move_extent.c
@@ -322,7 +322,7 @@
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					orig_path, new_ext))
+					orig_path, new_ext, 0))
 			goto out;
 	}
 
@@ -333,7 +333,7 @@
 			goto out;
 
 		if (ext4_ext_insert_extent(handle, orig_inode,
-					   orig_path, end_ext))
+					   orig_path, end_ext, 0))
 			goto out;
 	}
 out:
@@ -1001,14 +1001,6 @@
 		return -EINVAL;
 	}
 
-	/* orig and donor should be different file */
-	if (orig_inode->i_ino == donor_inode->i_ino) {
-		ext4_debug("ext4 move extent: The argument files should not "
-			"be same file [ino:orig %lu, donor %lu]\n",
-			orig_inode->i_ino, donor_inode->i_ino);
-		return -EINVAL;
-	}
-
 	/* Ext4 move extent supports only extent based file */
 	if (!(EXT4_I(orig_inode)->i_flags & EXT4_EXTENTS_FL)) {
 		ext4_debug("ext4 move extent: orig file is not extents "
@@ -1232,6 +1224,14 @@
 	int block_len_in_page;
 	int uninit;
 
+	/* orig and donor should be different file */
+	if (orig_inode->i_ino == donor_inode->i_ino) {
+		ext4_debug("ext4 move extent: The argument files should not "
+			"be same file [ino:orig %lu, donor %lu]\n",
+			orig_inode->i_ino, donor_inode->i_ino);
+		return -EINVAL;
+	}
+
 	/* protect orig and donor against a truncate */
 	ret1 = mext_inode_double_lock(orig_inode, donor_inode);
 	if (ret1 < 0)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index 42f81d2..7c8fe80 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -2076,7 +2076,8 @@
 	struct ext4_iloc iloc;
 	int err = 0;
 
-	if (!ext4_handle_valid(handle))
+	/* ext4_handle_valid() assumes a valid handle_t pointer */
+	if (handle && !ext4_handle_valid(handle))
 		return 0;
 
 	mutex_lock(&EXT4_SB(inode->i_sb)->s_orphan_lock);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index df539ba..312211e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -50,13 +50,6 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/ext4.h>
 
-static int default_mb_history_length = 1000;
-
-module_param_named(default_mb_history_length, default_mb_history_length,
-		   int, 0644);
-MODULE_PARM_DESC(default_mb_history_length,
-		 "Default number of entries saved for mb_history");
-
 struct proc_dir_entry *ext4_proc_root;
 static struct kset *ext4_kset;
 
@@ -189,6 +182,36 @@
 		bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
 }
 
+
+/* Just increment the non-pointer handle value */
+static handle_t *ext4_get_nojournal(void)
+{
+	handle_t *handle = current->journal_info;
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt >= EXT4_NOJOURNAL_MAX_REF_COUNT);
+
+	ref_cnt++;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+	return handle;
+}
+
+
+/* Decrement the non-pointer handle value */
+static void ext4_put_nojournal(handle_t *handle)
+{
+	unsigned long ref_cnt = (unsigned long)handle;
+
+	BUG_ON(ref_cnt == 0);
+
+	ref_cnt--;
+	handle = (handle_t *)ref_cnt;
+
+	current->journal_info = handle;
+}
+
 /*
  * Wrappers for jbd2_journal_start/end.
  *
@@ -215,11 +238,7 @@
 		}
 		return jbd2_journal_start(journal, nblocks);
 	}
-	/*
-	 * We're not journaling, return the appropriate indication.
-	 */
-	current->journal_info = EXT4_NOJOURNAL_HANDLE;
-	return current->journal_info;
+	return ext4_get_nojournal();
 }
 
 /*
@@ -235,11 +254,7 @@
 	int rc;
 
 	if (!ext4_handle_valid(handle)) {
-		/*
-		 * Do this here since we don't call jbd2_journal_stop() in
-		 * no-journal mode.
-		 */
-		current->journal_info = NULL;
+		ext4_put_nojournal(handle);
 		return 0;
 	}
 	sb = handle->h_transaction->t_journal->j_private;
@@ -580,6 +595,9 @@
 	struct ext4_super_block *es = sbi->s_es;
 	int i, err;
 
+	flush_workqueue(sbi->dio_unwritten_wq);
+	destroy_workqueue(sbi->dio_unwritten_wq);
+
 	lock_super(sb);
 	lock_kernel();
 	if (sb->s_dirt)
@@ -684,6 +702,8 @@
 	ei->i_allocated_meta_blocks = 0;
 	ei->i_delalloc_reserved_flag = 0;
 	spin_lock_init(&(ei->i_block_reservation_lock));
+	INIT_LIST_HEAD(&ei->i_aio_dio_complete_list);
+	ei->cur_aio_dio = NULL;
 
 	return &ei->vfs_inode;
 }
@@ -1052,7 +1072,7 @@
 	Opt_journal_update, Opt_journal_dev,
 	Opt_journal_checksum, Opt_journal_async_commit,
 	Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
-	Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
+	Opt_data_err_abort, Opt_data_err_ignore,
 	Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
 	Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
 	Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
@@ -1099,7 +1119,6 @@
 	{Opt_data_writeback, "data=writeback"},
 	{Opt_data_err_abort, "data_err=abort"},
 	{Opt_data_err_ignore, "data_err=ignore"},
-	{Opt_mb_history_length, "mb_history_length=%u"},
 	{Opt_offusrjquota, "usrjquota="},
 	{Opt_usrjquota, "usrjquota=%s"},
 	{Opt_offgrpjquota, "grpjquota="},
@@ -1340,13 +1359,6 @@
 		case Opt_data_err_ignore:
 			clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
 			break;
-		case Opt_mb_history_length:
-			if (match_int(&args[0], &option))
-				return 0;
-			if (option < 0)
-				return 0;
-			sbi->s_mb_history_max = option;
-			break;
 #ifdef CONFIG_QUOTA
 		case Opt_usrjquota:
 			qtype = USRQUOTA;
@@ -1646,13 +1658,6 @@
 			EXT4_INODES_PER_GROUP(sb),
 			sbi->s_mount_opt);
 
-	if (EXT4_SB(sb)->s_journal) {
-		ext4_msg(sb, KERN_INFO, "%s journal on %s",
-		       EXT4_SB(sb)->s_journal->j_inode ? "internal" :
-		       "external", EXT4_SB(sb)->s_journal->j_devname);
-	} else {
-		ext4_msg(sb, KERN_INFO, "no journal");
-	}
 	return res;
 }
 
@@ -2197,6 +2202,7 @@
 EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
 EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
 EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
+EXT4_RW_ATTR_SBI_UI(max_writeback_mb_bump, s_max_writeback_mb_bump);
 
 static struct attribute *ext4_attrs[] = {
 	ATTR_LIST(delayed_allocation_blocks),
@@ -2210,6 +2216,7 @@
 	ATTR_LIST(mb_order2_req),
 	ATTR_LIST(mb_stream_req),
 	ATTR_LIST(mb_group_prealloc),
+	ATTR_LIST(max_writeback_mb_bump),
 	NULL,
 };
 
@@ -2413,7 +2420,6 @@
 	sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
 	sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
 	sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
-	sbi->s_mb_history_max = default_mb_history_length;
 
 	set_opt(sbi->s_mount_opt, BARRIER);
 
@@ -2679,6 +2685,7 @@
 	}
 
 	sbi->s_stripe = ext4_get_stripe_size(sbi);
+	sbi->s_max_writeback_mb_bump = 128;
 
 	/*
 	 * set up enough so that it can read an inode
@@ -2798,6 +2805,12 @@
 			clear_opt(sbi->s_mount_opt, NOBH);
 		}
 	}
+	EXT4_SB(sb)->dio_unwritten_wq = create_workqueue("ext4-dio-unwritten");
+	if (!EXT4_SB(sb)->dio_unwritten_wq) {
+		printk(KERN_ERR "EXT4-fs: failed to create DIO workqueue\n");
+		goto failed_mount_wq;
+	}
+
 	/*
 	 * The jbd2_journal_load will have done any necessary log recovery,
 	 * so we can safely mount the rest of the filesystem now.
@@ -2849,12 +2862,12 @@
 			 "available");
 	}
 
-	if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
+	if (test_opt(sb, DELALLOC) &&
+	    (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)) {
 		ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
 			 "requested data journaling mode");
 		clear_opt(sbi->s_mount_opt, DELALLOC);
-	} else if (test_opt(sb, DELALLOC))
-		ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
+	}
 
 	err = ext4_setup_system_zone(sb);
 	if (err) {
@@ -2910,6 +2923,8 @@
 
 failed_mount4:
 	ext4_msg(sb, KERN_ERR, "mount failed");
+	destroy_workqueue(EXT4_SB(sb)->dio_unwritten_wq);
+failed_mount_wq:
 	ext4_release_system_zone(sb);
 	if (sbi->s_journal) {
 		jbd2_journal_destroy(sbi->s_journal);
@@ -3164,9 +3179,7 @@
 			return -EINVAL;
 	}
 
-	if (journal->j_flags & JBD2_BARRIER)
-		ext4_msg(sb, KERN_INFO, "barriers enabled");
-	else
+	if (!(journal->j_flags & JBD2_BARRIER))
 		ext4_msg(sb, KERN_INFO, "barriers disabled");
 
 	if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
@@ -3361,11 +3374,13 @@
 {
 	int ret = 0;
 	tid_t target;
+	struct ext4_sb_info *sbi = EXT4_SB(sb);
 
 	trace_ext4_sync_fs(sb, wait);
-	if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
+	flush_workqueue(sbi->dio_unwritten_wq);
+	if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
 		if (wait)
-			jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
+			jbd2_log_wait_commit(sbi->s_journal, target);
 	}
 	return ret;
 }
@@ -3951,27 +3966,6 @@
 	.fs_flags	= FS_REQUIRES_DEV,
 };
 
-#ifdef CONFIG_EXT4DEV_COMPAT
-static int ext4dev_get_sb(struct file_system_type *fs_type, int flags,
-			  const char *dev_name, void *data,struct vfsmount *mnt)
-{
-	printk(KERN_WARNING "EXT4-fs (%s): Update your userspace programs "
-	       "to mount using ext4\n", dev_name);
-	printk(KERN_WARNING "EXT4-fs (%s): ext4dev backwards compatibility "
-	       "will go away by 2.6.31\n", dev_name);
-	return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
-}
-
-static struct file_system_type ext4dev_fs_type = {
-	.owner		= THIS_MODULE,
-	.name		= "ext4dev",
-	.get_sb		= ext4dev_get_sb,
-	.kill_sb	= kill_block_super,
-	.fs_flags	= FS_REQUIRES_DEV,
-};
-MODULE_ALIAS("ext4dev");
-#endif
-
 static int __init init_ext4_fs(void)
 {
 	int err;
@@ -3996,13 +3990,6 @@
 	err = register_filesystem(&ext4_fs_type);
 	if (err)
 		goto out;
-#ifdef CONFIG_EXT4DEV_COMPAT
-	err = register_filesystem(&ext4dev_fs_type);
-	if (err) {
-		unregister_filesystem(&ext4_fs_type);
-		goto out;
-	}
-#endif
 	return 0;
 out:
 	destroy_inodecache();
@@ -4021,9 +4008,6 @@
 static void __exit exit_ext4_fs(void)
 {
 	unregister_filesystem(&ext4_fs_type);
-#ifdef CONFIG_EXT4DEV_COMPAT
-	unregister_filesystem(&ext4dev_fs_type);
-#endif
 	destroy_inodecache();
 	exit_ext4_xattr();
 	exit_ext4_mballoc();
diff --git a/fs/fat/fat.h b/fs/fat/fat.h
index adb0e72..7db0979 100644
--- a/fs/fat/fat.h
+++ b/fs/fat/fat.h
@@ -323,7 +323,7 @@
 /* fat/misc.c */
 extern void fat_fs_error(struct super_block *s, const char *fmt, ...)
 	__attribute__ ((format (printf, 2, 3))) __cold;
-extern void fat_clusters_flush(struct super_block *sb);
+extern int fat_clusters_flush(struct super_block *sb);
 extern int fat_chain_add(struct inode *inode, int new_dclus, int nr_cluster);
 extern void fat_time_fat2unix(struct msdos_sb_info *sbi, struct timespec *ts,
 			      __le16 __time, __le16 __date, u8 time_cs);
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 04629d1..76b7961 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -451,12 +451,16 @@
 
 static int fat_sync_fs(struct super_block *sb, int wait)
 {
-	lock_super(sb);
-	fat_clusters_flush(sb);
-	sb->s_dirt = 0;
-	unlock_super(sb);
+	int err = 0;
 
-	return 0;
+	if (sb->s_dirt) {
+		lock_super(sb);
+		sb->s_dirt = 0;
+		err = fat_clusters_flush(sb);
+		unlock_super(sb);
+	}
+
+	return err;
 }
 
 static void fat_put_super(struct super_block *sb)
@@ -812,7 +816,7 @@
 			seq_puts(m, ",shortname=mixed");
 			break;
 		case VFAT_SFN_DISPLAY_LOWER | VFAT_SFN_CREATE_WIN95:
-			/* seq_puts(m, ",shortname=lower"); */
+			seq_puts(m, ",shortname=lower");
 			break;
 		default:
 			seq_puts(m, ",shortname=unknown");
@@ -963,7 +967,7 @@
 	opts->codepage = fat_default_codepage;
 	opts->iocharset = fat_default_iocharset;
 	if (is_vfat) {
-		opts->shortname = VFAT_SFN_DISPLAY_LOWER|VFAT_SFN_CREATE_WIN95;
+		opts->shortname = VFAT_SFN_DISPLAY_WINNT|VFAT_SFN_CREATE_WIN95;
 		opts->rodir = 0;
 	} else {
 		opts->shortname = 0;
diff --git a/fs/fat/misc.c b/fs/fat/misc.c
index 4e35be8..0f55f5c 100644
--- a/fs/fat/misc.c
+++ b/fs/fat/misc.c
@@ -43,19 +43,19 @@
 
 /* Flushes the number of free clusters on FAT32 */
 /* XXX: Need to write one per FSINFO block.  Currently only writes 1 */
-void fat_clusters_flush(struct super_block *sb)
+int fat_clusters_flush(struct super_block *sb)
 {
 	struct msdos_sb_info *sbi = MSDOS_SB(sb);
 	struct buffer_head *bh;
 	struct fat_boot_fsinfo *fsinfo;
 
 	if (sbi->fat_bits != 32)
-		return;
+		return 0;
 
 	bh = sb_bread(sb, sbi->fsinfo_sector);
 	if (bh == NULL) {
 		printk(KERN_ERR "FAT: bread failed in fat_clusters_flush\n");
-		return;
+		return -EIO;
 	}
 
 	fsinfo = (struct fat_boot_fsinfo *)bh->b_data;
@@ -74,6 +74,8 @@
 		mark_buffer_dirty(bh);
 	}
 	brelse(bh);
+
+	return 0;
 }
 
 /*
diff --git a/fs/fat/namei_vfat.c b/fs/fat/namei_vfat.c
index cb6e835..f565f24 100644
--- a/fs/fat/namei_vfat.c
+++ b/fs/fat/namei_vfat.c
@@ -499,17 +499,10 @@
 	int charlen;
 
 	if (utf8) {
-		int name_len = strlen(name);
-
-		*outlen = utf8s_to_utf16s(name, PATH_MAX, (wchar_t *) outname);
-
-		/*
-		 * We stripped '.'s before and set len appropriately,
-		 * but utf8s_to_utf16s doesn't care about len
-		 */
-		*outlen -= (name_len - len);
-
-		if (*outlen > 255)
+		*outlen = utf8s_to_utf16s(name, len, (wchar_t *)outname);
+		if (*outlen < 0)
+			return *outlen;
+		else if (*outlen > 255)
 			return -ENAMETOOLONG;
 
 		op = &outname[*outlen * sizeof(wchar_t)];
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 8e1e5e1..9d5360c 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -41,8 +41,9 @@
 	long nr_pages;
 	struct super_block *sb;
 	enum writeback_sync_modes sync_mode;
-	int for_kupdate;
-	int range_cyclic;
+	int for_kupdate:1;
+	int range_cyclic:1;
+	int for_background:1;
 };
 
 /*
@@ -249,14 +250,25 @@
  *   completion. Caller need not hold sb s_umount semaphore.
  *
  */
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages)
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+			 long nr_pages)
 {
 	struct wb_writeback_args args = {
+		.sb		= sb,
 		.sync_mode	= WB_SYNC_NONE,
 		.nr_pages	= nr_pages,
 		.range_cyclic	= 1,
 	};
 
+	/*
+	 * We treat @nr_pages=0 as the special case to do background writeback,
+	 * ie. to sync pages until the background dirty threshold is reached.
+	 */
+	if (!nr_pages) {
+		args.nr_pages = LONG_MAX;
+		args.for_background = 1;
+	}
+
 	bdi_alloc_queue_work(bdi, &args);
 }
 
@@ -310,7 +322,7 @@
 	 * For inodes being constantly redirtied, dirtied_when can get stuck.
 	 * It _appears_ to be in the future, but is actually in distant past.
 	 * This test is necessary to prevent such wrapped-around relative times
-	 * from permanently stopping the whole pdflush writeback.
+	 * from permanently stopping the whole bdi writeback.
 	 */
 	ret = ret && time_before_eq(inode->dirtied_when, jiffies);
 #endif
@@ -324,13 +336,38 @@
 			       struct list_head *dispatch_queue,
 				unsigned long *older_than_this)
 {
+	LIST_HEAD(tmp);
+	struct list_head *pos, *node;
+	struct super_block *sb = NULL;
+	struct inode *inode;
+	int do_sb_sort = 0;
+
 	while (!list_empty(delaying_queue)) {
-		struct inode *inode = list_entry(delaying_queue->prev,
-						struct inode, i_list);
+		inode = list_entry(delaying_queue->prev, struct inode, i_list);
 		if (older_than_this &&
 		    inode_dirtied_after(inode, *older_than_this))
 			break;
-		list_move(&inode->i_list, dispatch_queue);
+		if (sb && sb != inode->i_sb)
+			do_sb_sort = 1;
+		sb = inode->i_sb;
+		list_move(&inode->i_list, &tmp);
+	}
+
+	/* just one sb in list, splice to dispatch_queue and we're done */
+	if (!do_sb_sort) {
+		list_splice(&tmp, dispatch_queue);
+		return;
+	}
+
+	/* Move inodes from one superblock together */
+	while (!list_empty(&tmp)) {
+		inode = list_entry(tmp.prev, struct inode, i_list);
+		sb = inode->i_sb;
+		list_for_each_prev_safe(pos, node, &tmp) {
+			inode = list_entry(pos, struct inode, i_list);
+			if (inode->i_sb == sb)
+				list_move(&inode->i_list, dispatch_queue);
+		}
 	}
 }
 
@@ -439,8 +476,18 @@
 	spin_lock(&inode_lock);
 	inode->i_state &= ~I_SYNC;
 	if (!(inode->i_state & (I_FREEING | I_CLEAR))) {
-		if (!(inode->i_state & I_DIRTY) &&
-		    mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
+		if ((inode->i_state & I_DIRTY_PAGES) && wbc->for_kupdate) {
+			/*
+			 * More pages get dirtied by a fast dirtier.
+			 */
+			goto select_queue;
+		} else if (inode->i_state & I_DIRTY) {
+			/*
+			 * At least XFS will redirty the inode during the
+			 * writeback (delalloc) and on io completion (isize).
+			 */
+			redirty_tail(inode);
+		} else if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
 			/*
 			 * We didn't write back all the pages.  nfs_writepages()
 			 * sometimes bales out without doing anything. Redirty
@@ -462,6 +509,7 @@
 				 * soon as the queue becomes uncongested.
 				 */
 				inode->i_state |= I_DIRTY_PAGES;
+select_queue:
 				if (wbc->nr_to_write <= 0) {
 					/*
 					 * slice used up: queue for next turn
@@ -484,12 +532,6 @@
 				inode->i_state |= I_DIRTY_PAGES;
 				redirty_tail(inode);
 			}
-		} else if (inode->i_state & I_DIRTY) {
-			/*
-			 * Someone redirtied the inode while were writing back
-			 * the pages.
-			 */
-			redirty_tail(inode);
 		} else if (atomic_read(&inode->i_count)) {
 			/*
 			 * The inode is clean, inuse
@@ -506,6 +548,17 @@
 	return ret;
 }
 
+static void unpin_sb_for_writeback(struct super_block **psb)
+{
+	struct super_block *sb = *psb;
+
+	if (sb) {
+		up_read(&sb->s_umount);
+		put_super(sb);
+		*psb = NULL;
+	}
+}
+
 /*
  * For WB_SYNC_NONE writeback, the caller does not have the sb pinned
  * before calling writeback. So make sure that we do pin it, so it doesn't
@@ -515,11 +568,20 @@
  * 1 if we failed.
  */
 static int pin_sb_for_writeback(struct writeback_control *wbc,
-				   struct inode *inode)
+				struct inode *inode, struct super_block **psb)
 {
 	struct super_block *sb = inode->i_sb;
 
 	/*
+	 * If this sb is already pinned, nothing more to do. If not and
+	 * *psb is non-NULL, unpin the old one first
+	 */
+	if (sb == *psb)
+		return 0;
+	else if (*psb)
+		unpin_sb_for_writeback(psb);
+
+	/*
 	 * Caller must already hold the ref for this
 	 */
 	if (wbc->sync_mode == WB_SYNC_ALL) {
@@ -532,7 +594,7 @@
 	if (down_read_trylock(&sb->s_umount)) {
 		if (sb->s_root) {
 			spin_unlock(&sb_lock);
-			return 0;
+			goto pinned;
 		}
 		/*
 		 * umounted, drop rwsem again and fall through to failure
@@ -543,24 +605,15 @@
 	sb->s_count--;
 	spin_unlock(&sb_lock);
 	return 1;
-}
-
-static void unpin_sb_for_writeback(struct writeback_control *wbc,
-				   struct inode *inode)
-{
-	struct super_block *sb = inode->i_sb;
-
-	if (wbc->sync_mode == WB_SYNC_ALL)
-		return;
-
-	up_read(&sb->s_umount);
-	put_super(sb);
+pinned:
+	*psb = sb;
+	return 0;
 }
 
 static void writeback_inodes_wb(struct bdi_writeback *wb,
 				struct writeback_control *wbc)
 {
-	struct super_block *sb = wbc->sb;
+	struct super_block *sb = wbc->sb, *pin_sb = NULL;
 	const int is_blkdev_sb = sb_is_blkdev_sb(sb);
 	const unsigned long start = jiffies;	/* livelock avoidance */
 
@@ -619,7 +672,7 @@
 		if (inode_dirtied_after(inode, start))
 			break;
 
-		if (pin_sb_for_writeback(wbc, inode)) {
+		if (pin_sb_for_writeback(wbc, inode, &pin_sb)) {
 			requeue_io(inode);
 			continue;
 		}
@@ -628,7 +681,6 @@
 		__iget(inode);
 		pages_skipped = wbc->pages_skipped;
 		writeback_single_inode(inode, wbc);
-		unpin_sb_for_writeback(wbc, inode);
 		if (wbc->pages_skipped != pages_skipped) {
 			/*
 			 * writeback is not making progress due to locked
@@ -648,6 +700,8 @@
 			wbc->more_io = 1;
 	}
 
+	unpin_sb_for_writeback(&pin_sb);
+
 	spin_unlock(&inode_lock);
 	/* Leave any unwritten inodes on b_io */
 }
@@ -706,6 +760,7 @@
 	};
 	unsigned long oldest_jif;
 	long wrote = 0;
+	struct inode *inode;
 
 	if (wbc.for_kupdate) {
 		wbc.older_than_this = &oldest_jif;
@@ -719,20 +774,16 @@
 
 	for (;;) {
 		/*
-		 * Don't flush anything for non-integrity writeback where
-		 * no nr_pages was given
+		 * Stop writeback when nr_pages has been consumed
 		 */
-		if (!args->for_kupdate && args->nr_pages <= 0 &&
-		     args->sync_mode == WB_SYNC_NONE)
+		if (args->nr_pages <= 0)
 			break;
 
 		/*
-		 * If no specific pages were given and this is just a
-		 * periodic background writeout and we are below the
-		 * background dirty threshold, don't do anything
+		 * For background writeout, stop when we are below the
+		 * background dirty threshold
 		 */
-		if (args->for_kupdate && args->nr_pages <= 0 &&
-		    !over_bground_thresh())
+		if (args->for_background && !over_bground_thresh())
 			break;
 
 		wbc.more_io = 0;
@@ -744,13 +795,32 @@
 		wrote += MAX_WRITEBACK_PAGES - wbc.nr_to_write;
 
 		/*
-		 * If we ran out of stuff to write, bail unless more_io got set
+		 * If we consumed everything, see if we have more
 		 */
-		if (wbc.nr_to_write > 0 || wbc.pages_skipped > 0) {
-			if (wbc.more_io && !wbc.for_kupdate)
-				continue;
+		if (wbc.nr_to_write <= 0)
+			continue;
+		/*
+		 * Didn't write everything and we don't have more IO, bail
+		 */
+		if (!wbc.more_io)
 			break;
+		/*
+		 * Did we write something? Try for more
+		 */
+		if (wbc.nr_to_write < MAX_WRITEBACK_PAGES)
+			continue;
+		/*
+		 * Nothing written. Wait for some inode to
+		 * become available for writeback. Otherwise
+		 * we'll just busyloop.
+		 */
+		spin_lock(&inode_lock);
+		if (!list_empty(&wb->b_more_io))  {
+			inode = list_entry(wb->b_more_io.prev,
+						struct inode, i_list);
+			inode_wait_for_writeback(inode);
 		}
+		spin_unlock(&inode_lock);
 	}
 
 	return wrote;
@@ -1060,9 +1130,6 @@
  * If older_than_this is non-NULL, then only write out inodes which
  * had their first dirtying at a time earlier than *older_than_this.
  *
- * If we're a pdlfush thread, then implement pdflush collision avoidance
- * against the entire list.
- *
  * If `bdi' is non-zero then we're being asked to writeback a specific queue.
  * This function assumes that the blockdev superblock's inodes are backed by
  * a variety of queues, so all inodes are searched.  For other superblocks,
@@ -1141,7 +1208,7 @@
 	nr_to_write = nr_dirty + nr_unstable +
 			(inodes_stat.nr_inodes - inodes_stat.nr_unused);
 
-	bdi_writeback_all(sb, nr_to_write);
+	bdi_start_writeback(sb->s_bdi, sb, nr_to_write);
 }
 EXPORT_SYMBOL(writeback_inodes_sb);
 
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index cbc4640..a3492f7 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1313,7 +1313,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct fuse_file_vm_ops = {
+static const struct vm_operations_struct fuse_file_vm_ops = {
 	.close		= fuse_vma_close,
 	.fault		= filemap_fault,
 	.page_mkwrite	= fuse_page_mkwrite,
diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c
index 166f38f..4eb308a 100644
--- a/fs/gfs2/file.c
+++ b/fs/gfs2/file.c
@@ -418,7 +418,7 @@
 	return ret;
 }
 
-static struct vm_operations_struct gfs2_vm_ops = {
+static const struct vm_operations_struct gfs2_vm_ops = {
 	.fault = filemap_fault,
 	.page_mkwrite = gfs2_page_mkwrite,
 };
diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c
index 5d70b3e..ca0f5eb 100644
--- a/fs/jbd2/checkpoint.c
+++ b/fs/jbd2/checkpoint.c
@@ -643,6 +643,7 @@
 
 int __jbd2_journal_remove_checkpoint(struct journal_head *jh)
 {
+	struct transaction_chp_stats_s *stats;
 	transaction_t *transaction;
 	journal_t *journal;
 	int ret = 0;
@@ -679,6 +680,12 @@
 
 	/* OK, that was the last buffer for the transaction: we can now
 	   safely remove this transaction from the log */
+	stats = &transaction->t_chp_stats;
+	if (stats->cs_chp_time)
+		stats->cs_chp_time = jbd2_time_diff(stats->cs_chp_time,
+						    jiffies);
+	trace_jbd2_checkpoint_stats(journal->j_fs_dev->bd_dev,
+				    transaction->t_tid, stats);
 
 	__jbd2_journal_drop_transaction(journal, transaction);
 	kfree(transaction);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index 26d991d..d4cfd6d 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -410,10 +410,10 @@
 	if (commit_transaction->t_synchronous_commit)
 		write_op = WRITE_SYNC_PLUG;
 	trace_jbd2_commit_locking(journal, commit_transaction);
-	stats.u.run.rs_wait = commit_transaction->t_max_wait;
-	stats.u.run.rs_locked = jiffies;
-	stats.u.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
-						stats.u.run.rs_locked);
+	stats.run.rs_wait = commit_transaction->t_max_wait;
+	stats.run.rs_locked = jiffies;
+	stats.run.rs_running = jbd2_time_diff(commit_transaction->t_start,
+					      stats.run.rs_locked);
 
 	spin_lock(&commit_transaction->t_handle_lock);
 	while (commit_transaction->t_updates) {
@@ -486,9 +486,9 @@
 	jbd2_journal_switch_revoke_table(journal);
 
 	trace_jbd2_commit_flushing(journal, commit_transaction);
-	stats.u.run.rs_flushing = jiffies;
-	stats.u.run.rs_locked = jbd2_time_diff(stats.u.run.rs_locked,
-					       stats.u.run.rs_flushing);
+	stats.run.rs_flushing = jiffies;
+	stats.run.rs_locked = jbd2_time_diff(stats.run.rs_locked,
+					     stats.run.rs_flushing);
 
 	commit_transaction->t_state = T_FLUSH;
 	journal->j_committing_transaction = commit_transaction;
@@ -523,11 +523,11 @@
 	spin_unlock(&journal->j_state_lock);
 
 	trace_jbd2_commit_logging(journal, commit_transaction);
-	stats.u.run.rs_logging = jiffies;
-	stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
-						 stats.u.run.rs_logging);
-	stats.u.run.rs_blocks = commit_transaction->t_outstanding_credits;
-	stats.u.run.rs_blocks_logged = 0;
+	stats.run.rs_logging = jiffies;
+	stats.run.rs_flushing = jbd2_time_diff(stats.run.rs_flushing,
+					       stats.run.rs_logging);
+	stats.run.rs_blocks = commit_transaction->t_outstanding_credits;
+	stats.run.rs_blocks_logged = 0;
 
 	J_ASSERT(commit_transaction->t_nr_buffers <=
 		 commit_transaction->t_outstanding_credits);
@@ -695,7 +695,7 @@
 				submit_bh(write_op, bh);
 			}
 			cond_resched();
-			stats.u.run.rs_blocks_logged += bufs;
+			stats.run.rs_blocks_logged += bufs;
 
 			/* Force a new descriptor to be generated next
                            time round the loop. */
@@ -988,33 +988,30 @@
 	J_ASSERT(commit_transaction->t_state == T_COMMIT);
 
 	commit_transaction->t_start = jiffies;
-	stats.u.run.rs_logging = jbd2_time_diff(stats.u.run.rs_logging,
-						commit_transaction->t_start);
+	stats.run.rs_logging = jbd2_time_diff(stats.run.rs_logging,
+					      commit_transaction->t_start);
 
 	/*
-	 * File the transaction for history
+	 * File the transaction statistics
 	 */
-	stats.ts_type = JBD2_STATS_RUN;
 	stats.ts_tid = commit_transaction->t_tid;
-	stats.u.run.rs_handle_count = commit_transaction->t_handle_count;
-	spin_lock(&journal->j_history_lock);
-	memcpy(journal->j_history + journal->j_history_cur, &stats,
-			sizeof(stats));
-	if (++journal->j_history_cur == journal->j_history_max)
-		journal->j_history_cur = 0;
+	stats.run.rs_handle_count = commit_transaction->t_handle_count;
+	trace_jbd2_run_stats(journal->j_fs_dev->bd_dev,
+			     commit_transaction->t_tid, &stats.run);
 
 	/*
 	 * Calculate overall stats
 	 */
+	spin_lock(&journal->j_history_lock);
 	journal->j_stats.ts_tid++;
-	journal->j_stats.u.run.rs_wait += stats.u.run.rs_wait;
-	journal->j_stats.u.run.rs_running += stats.u.run.rs_running;
-	journal->j_stats.u.run.rs_locked += stats.u.run.rs_locked;
-	journal->j_stats.u.run.rs_flushing += stats.u.run.rs_flushing;
-	journal->j_stats.u.run.rs_logging += stats.u.run.rs_logging;
-	journal->j_stats.u.run.rs_handle_count += stats.u.run.rs_handle_count;
-	journal->j_stats.u.run.rs_blocks += stats.u.run.rs_blocks;
-	journal->j_stats.u.run.rs_blocks_logged += stats.u.run.rs_blocks_logged;
+	journal->j_stats.run.rs_wait += stats.run.rs_wait;
+	journal->j_stats.run.rs_running += stats.run.rs_running;
+	journal->j_stats.run.rs_locked += stats.run.rs_locked;
+	journal->j_stats.run.rs_flushing += stats.run.rs_flushing;
+	journal->j_stats.run.rs_logging += stats.run.rs_logging;
+	journal->j_stats.run.rs_handle_count += stats.run.rs_handle_count;
+	journal->j_stats.run.rs_blocks += stats.run.rs_blocks;
+	journal->j_stats.run.rs_blocks_logged += stats.run.rs_blocks_logged;
 	spin_unlock(&journal->j_history_lock);
 
 	commit_transaction->t_state = T_FINISHED;
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 53b86e1..b0ab521 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -136,10 +136,6 @@
 	journal->j_task = current;
 	wake_up(&journal->j_wait_done_commit);
 
-	printk(KERN_INFO "kjournald2 starting: pid %d, dev %s, "
-	       "commit interval %ld seconds\n", current->pid,
-	       journal->j_devname, journal->j_commit_interval / HZ);
-
 	/*
 	 * And now, wait forever for commit wakeup events.
 	 */
@@ -223,7 +219,8 @@
 {
 	struct task_struct *t;
 
-	t = kthread_run(kjournald2, journal, "kjournald2");
+	t = kthread_run(kjournald2, journal, "jbd2/%s",
+			journal->j_devname);
 	if (IS_ERR(t))
 		return PTR_ERR(t);
 
@@ -679,153 +676,6 @@
 	int max;
 };
 
-static void *jbd2_history_skip_empty(struct jbd2_stats_proc_session *s,
-					struct transaction_stats_s *ts,
-					int first)
-{
-	if (ts == s->stats + s->max)
-		ts = s->stats;
-	if (!first && ts == s->stats + s->start)
-		return NULL;
-	while (ts->ts_type == 0) {
-		ts++;
-		if (ts == s->stats + s->max)
-			ts = s->stats;
-		if (ts == s->stats + s->start)
-			return NULL;
-	}
-	return ts;
-
-}
-
-static void *jbd2_seq_history_start(struct seq_file *seq, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts;
-	int l = *pos;
-
-	if (l == 0)
-		return SEQ_START_TOKEN;
-	ts = jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	if (!ts)
-		return NULL;
-	l--;
-	while (l) {
-		ts = jbd2_history_skip_empty(s, ++ts, 0);
-		if (!ts)
-			break;
-		l--;
-	}
-	return ts;
-}
-
-static void *jbd2_seq_history_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct jbd2_stats_proc_session *s = seq->private;
-	struct transaction_stats_s *ts = v;
-
-	++*pos;
-	if (v == SEQ_START_TOKEN)
-		return jbd2_history_skip_empty(s, s->stats + s->start, 1);
-	else
-		return jbd2_history_skip_empty(s, ++ts, 0);
-}
-
-static int jbd2_seq_history_show(struct seq_file *seq, void *v)
-{
-	struct transaction_stats_s *ts = v;
-	if (v == SEQ_START_TOKEN) {
-		seq_printf(seq, "%-4s %-5s %-5s %-5s %-5s %-5s %-5s %-6s %-5s "
-				"%-5s %-5s %-5s %-5s %-5s\n", "R/C", "tid",
-				"wait", "run", "lock", "flush", "log", "hndls",
-				"block", "inlog", "ctime", "write", "drop",
-				"close");
-		return 0;
-	}
-	if (ts->ts_type == JBD2_STATS_RUN)
-		seq_printf(seq, "%-4s %-5lu %-5u %-5u %-5u %-5u %-5u "
-				"%-6lu %-5lu %-5lu\n", "R", ts->ts_tid,
-				jiffies_to_msecs(ts->u.run.rs_wait),
-				jiffies_to_msecs(ts->u.run.rs_running),
-				jiffies_to_msecs(ts->u.run.rs_locked),
-				jiffies_to_msecs(ts->u.run.rs_flushing),
-				jiffies_to_msecs(ts->u.run.rs_logging),
-				ts->u.run.rs_handle_count,
-				ts->u.run.rs_blocks,
-				ts->u.run.rs_blocks_logged);
-	else if (ts->ts_type == JBD2_STATS_CHECKPOINT)
-		seq_printf(seq, "%-4s %-5lu %48s %-5u %-5lu %-5lu %-5lu\n",
-				"C", ts->ts_tid, " ",
-				jiffies_to_msecs(ts->u.chp.cs_chp_time),
-				ts->u.chp.cs_written, ts->u.chp.cs_dropped,
-				ts->u.chp.cs_forced_to_close);
-	else
-		J_ASSERT(0);
-	return 0;
-}
-
-static void jbd2_seq_history_stop(struct seq_file *seq, void *v)
-{
-}
-
-static const struct seq_operations jbd2_seq_history_ops = {
-	.start  = jbd2_seq_history_start,
-	.next   = jbd2_seq_history_next,
-	.stop   = jbd2_seq_history_stop,
-	.show   = jbd2_seq_history_show,
-};
-
-static int jbd2_seq_history_open(struct inode *inode, struct file *file)
-{
-	journal_t *journal = PDE(inode)->data;
-	struct jbd2_stats_proc_session *s;
-	int rc, size;
-
-	s = kmalloc(sizeof(*s), GFP_KERNEL);
-	if (s == NULL)
-		return -ENOMEM;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	s->stats = kmalloc(size, GFP_KERNEL);
-	if (s->stats == NULL) {
-		kfree(s);
-		return -ENOMEM;
-	}
-	spin_lock(&journal->j_history_lock);
-	memcpy(s->stats, journal->j_history, size);
-	s->max = journal->j_history_max;
-	s->start = journal->j_history_cur % s->max;
-	spin_unlock(&journal->j_history_lock);
-
-	rc = seq_open(file, &jbd2_seq_history_ops);
-	if (rc == 0) {
-		struct seq_file *m = file->private_data;
-		m->private = s;
-	} else {
-		kfree(s->stats);
-		kfree(s);
-	}
-	return rc;
-
-}
-
-static int jbd2_seq_history_release(struct inode *inode, struct file *file)
-{
-	struct seq_file *seq = file->private_data;
-	struct jbd2_stats_proc_session *s = seq->private;
-
-	kfree(s->stats);
-	kfree(s);
-	return seq_release(inode, file);
-}
-
-static struct file_operations jbd2_seq_history_fops = {
-	.owner		= THIS_MODULE,
-	.open           = jbd2_seq_history_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = jbd2_seq_history_release,
-};
-
 static void *jbd2_seq_info_start(struct seq_file *seq, loff_t *pos)
 {
 	return *pos ? NULL : SEQ_START_TOKEN;
@@ -842,29 +692,29 @@
 
 	if (v != SEQ_START_TOKEN)
 		return 0;
-	seq_printf(seq, "%lu transaction, each upto %u blocks\n",
+	seq_printf(seq, "%lu transaction, each up to %u blocks\n",
 			s->stats->ts_tid,
 			s->journal->j_max_transaction_buffers);
 	if (s->stats->ts_tid == 0)
 		return 0;
 	seq_printf(seq, "average: \n  %ums waiting for transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_wait / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_wait / s->stats->ts_tid));
 	seq_printf(seq, "  %ums running transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_running / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_running / s->stats->ts_tid));
 	seq_printf(seq, "  %ums transaction was being locked\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_locked / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_locked / s->stats->ts_tid));
 	seq_printf(seq, "  %ums flushing data (in ordered mode)\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_flushing / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_flushing / s->stats->ts_tid));
 	seq_printf(seq, "  %ums logging transaction\n",
-	    jiffies_to_msecs(s->stats->u.run.rs_logging / s->stats->ts_tid));
+	    jiffies_to_msecs(s->stats->run.rs_logging / s->stats->ts_tid));
 	seq_printf(seq, "  %lluus average transaction commit time\n",
 		   div_u64(s->journal->j_average_commit_time, 1000));
 	seq_printf(seq, "  %lu handles per transaction\n",
-	    s->stats->u.run.rs_handle_count / s->stats->ts_tid);
+	    s->stats->run.rs_handle_count / s->stats->ts_tid);
 	seq_printf(seq, "  %lu blocks per transaction\n",
-	    s->stats->u.run.rs_blocks / s->stats->ts_tid);
+	    s->stats->run.rs_blocks / s->stats->ts_tid);
 	seq_printf(seq, "  %lu logged blocks per transaction\n",
-	    s->stats->u.run.rs_blocks_logged / s->stats->ts_tid);
+	    s->stats->run.rs_blocks_logged / s->stats->ts_tid);
 	return 0;
 }
 
@@ -920,7 +770,7 @@
 	return seq_release(inode, file);
 }
 
-static struct file_operations jbd2_seq_info_fops = {
+static const struct file_operations jbd2_seq_info_fops = {
 	.owner		= THIS_MODULE,
 	.open           = jbd2_seq_info_open,
 	.read           = seq_read,
@@ -934,8 +784,6 @@
 {
 	journal->j_proc_entry = proc_mkdir(journal->j_devname, proc_jbd2_stats);
 	if (journal->j_proc_entry) {
-		proc_create_data("history", S_IRUGO, journal->j_proc_entry,
-				 &jbd2_seq_history_fops, journal);
 		proc_create_data("info", S_IRUGO, journal->j_proc_entry,
 				 &jbd2_seq_info_fops, journal);
 	}
@@ -944,27 +792,9 @@
 static void jbd2_stats_proc_exit(journal_t *journal)
 {
 	remove_proc_entry("info", journal->j_proc_entry);
-	remove_proc_entry("history", journal->j_proc_entry);
 	remove_proc_entry(journal->j_devname, proc_jbd2_stats);
 }
 
-static void journal_init_stats(journal_t *journal)
-{
-	int size;
-
-	if (!proc_jbd2_stats)
-		return;
-
-	journal->j_history_max = 100;
-	size = sizeof(struct transaction_stats_s) * journal->j_history_max;
-	journal->j_history = kzalloc(size, GFP_KERNEL);
-	if (!journal->j_history) {
-		journal->j_history_max = 0;
-		return;
-	}
-	spin_lock_init(&journal->j_history_lock);
-}
-
 /*
  * Management for journal control blocks: functions to create and
  * destroy journal_t structures, and to initialise and read existing
@@ -1009,7 +839,7 @@
 		goto fail;
 	}
 
-	journal_init_stats(journal);
+	spin_lock_init(&journal->j_history_lock);
 
 	return journal;
 fail:
@@ -1115,7 +945,7 @@
 	while ((p = strchr(p, '/')))
 		*p = '!';
 	p = journal->j_devname + strlen(journal->j_devname);
-	sprintf(p, ":%lu", journal->j_inode->i_ino);
+	sprintf(p, "-%lu", journal->j_inode->i_ino);
 	jbd_debug(1,
 		  "journal %p: inode %s/%ld, size %Ld, bits %d, blksize %ld\n",
 		  journal, inode->i_sb->s_id, inode->i_ino,
diff --git a/fs/ncpfs/mmap.c b/fs/ncpfs/mmap.c
index 5d8dcb9..15458de 100644
--- a/fs/ncpfs/mmap.c
+++ b/fs/ncpfs/mmap.c
@@ -95,7 +95,7 @@
 	return VM_FAULT_MAJOR;
 }
 
-static struct vm_operations_struct ncp_file_mmap =
+static const struct vm_operations_struct ncp_file_mmap =
 {
 	.fault = ncp_file_mmap_fault,
 };
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 86d6b4d..f5fdd39 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -59,7 +59,7 @@
 static int nfs_flock(struct file *filp, int cmd, struct file_lock *fl);
 static int nfs_setlease(struct file *file, long arg, struct file_lock **fl);
 
-static struct vm_operations_struct nfs_file_vm_ops;
+static const struct vm_operations_struct nfs_file_vm_ops;
 
 const struct file_operations nfs_file_operations = {
 	.llseek		= nfs_file_llseek,
@@ -572,7 +572,7 @@
 	return VM_FAULT_SIGBUS;
 }
 
-static struct vm_operations_struct nfs_file_vm_ops = {
+static const struct vm_operations_struct nfs_file_vm_ops = {
 	.fault = filemap_fault,
 	.page_mkwrite = nfs_vm_page_mkwrite,
 };
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 810770f..29786d3 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -1711,6 +1711,8 @@
 
 		if (!(data->flags & NFS_MOUNT_TCP))
 			args->nfs_server.protocol = XPRT_TRANSPORT_UDP;
+		else
+			args->nfs_server.protocol = XPRT_TRANSPORT_TCP;
 		/* N.B. caller will free nfs_server.hostname in all cases */
 		args->nfs_server.hostname = kstrdup(data->hostname, GFP_KERNEL);
 		args->namlen		= data->namlen;
diff --git a/fs/nfsd/nfsctl.c b/fs/nfsd/nfsctl.c
index 00388d2..5c01fc1 100644
--- a/fs/nfsd/nfsctl.c
+++ b/fs/nfsd/nfsctl.c
@@ -176,7 +176,7 @@
 extern int nfsd_pool_stats_open(struct inode *inode, struct file *file);
 extern int nfsd_pool_stats_release(struct inode *inode, struct file *file);
 
-static struct file_operations pool_stats_operations = {
+static const struct file_operations pool_stats_operations = {
 	.open		= nfsd_pool_stats_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c
index 6a2711f..5941958 100644
--- a/fs/nilfs2/btnode.c
+++ b/fs/nilfs2/btnode.c
@@ -36,6 +36,7 @@
 
 void nilfs_btnode_cache_init_once(struct address_space *btnc)
 {
+	memset(btnc, 0, sizeof(*btnc));
 	INIT_RADIX_TREE(&btnc->page_tree, GFP_ATOMIC);
 	spin_lock_init(&btnc->tree_lock);
 	INIT_LIST_HEAD(&btnc->private_list);
diff --git a/fs/nilfs2/dir.c b/fs/nilfs2/dir.c
index 1a4fa04..e097099 100644
--- a/fs/nilfs2/dir.c
+++ b/fs/nilfs2/dir.c
@@ -697,7 +697,7 @@
 	return 0;
 }
 
-struct file_operations nilfs_dir_operations = {
+const struct file_operations nilfs_dir_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= generic_read_dir,
 	.readdir	= nilfs_readdir,
diff --git a/fs/nilfs2/file.c b/fs/nilfs2/file.c
index fc8278c..30292df 100644
--- a/fs/nilfs2/file.c
+++ b/fs/nilfs2/file.c
@@ -117,7 +117,7 @@
 	return 0;
 }
 
-struct vm_operations_struct nilfs_file_vm_ops = {
+static const struct vm_operations_struct nilfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= nilfs_page_mkwrite,
 };
@@ -134,7 +134,7 @@
  * We have mostly NULL's here: the current defaults are ok for
  * the nilfs filesystem.
  */
-struct file_operations nilfs_file_operations = {
+const struct file_operations nilfs_file_operations = {
 	.llseek		= generic_file_llseek,
 	.read		= do_sync_read,
 	.write		= do_sync_write,
diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c
index 2d2c501..5040220 100644
--- a/fs/nilfs2/inode.c
+++ b/fs/nilfs2/inode.c
@@ -400,6 +400,7 @@
 	ii->i_dir_acl = S_ISREG(inode->i_mode) ?
 		0 : le32_to_cpu(raw_inode->i_dir_acl);
 #endif
+	ii->i_dir_start_lookup = 0;
 	ii->i_cno = 0;
 	inode->i_generation = le32_to_cpu(raw_inode->i_generation);
 
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index b18c499..f632611 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -433,7 +433,7 @@
 };
 
 static const struct inode_operations def_mdt_iops;
-static struct file_operations def_mdt_fops;
+static const struct file_operations def_mdt_fops;
 
 /*
  * NILFS2 uses pseudo inodes for meta data files such as DAT, cpfile, sufile,
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index bad7368..4da6f67 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -294,9 +294,9 @@
 /*
  * Inodes and files operations
  */
-extern struct file_operations nilfs_dir_operations;
+extern const struct file_operations nilfs_dir_operations;
 extern const struct inode_operations nilfs_file_inode_operations;
-extern struct file_operations nilfs_file_operations;
+extern const struct file_operations nilfs_file_operations;
 extern const struct address_space_operations nilfs_aops;
 extern const struct inode_operations nilfs_dir_inode_operations;
 extern const struct inode_operations nilfs_special_inode_operations;
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c
index 2224b4d..44a88a9 100644
--- a/fs/nls/nls_base.c
+++ b/fs/nls/nls_base.c
@@ -124,10 +124,10 @@
 	while (*s && len > 0) {
 		if (*s & 0x80) {
 			size = utf8_to_utf32(s, len, &u);
-			if (size < 0) {
-				/* Ignore character and move on */
-				size = 1;
-			} else if (u >= PLANE_SIZE) {
+			if (size < 0)
+				return -EINVAL;
+
+			if (u >= PLANE_SIZE) {
 				u -= PLANE_SIZE;
 				*op++ = (wchar_t) (SURROGATE_PAIR |
 						((u >> 10) & SURROGATE_BITS));
diff --git a/fs/ocfs2/cluster/heartbeat.c b/fs/ocfs2/cluster/heartbeat.c
index 09cc25d..c452d11 100644
--- a/fs/ocfs2/cluster/heartbeat.c
+++ b/fs/ocfs2/cluster/heartbeat.c
@@ -966,7 +966,7 @@
 }
 #endif  /* CONFIG_DEBUG_FS */
 
-static struct file_operations o2hb_debug_fops = {
+static const struct file_operations o2hb_debug_fops = {
 	.open =		o2hb_debug_open,
 	.release =	o2hb_debug_release,
 	.read =		o2hb_debug_read,
diff --git a/fs/ocfs2/cluster/netdebug.c b/fs/ocfs2/cluster/netdebug.c
index cfb2be7..a3f150e 100644
--- a/fs/ocfs2/cluster/netdebug.c
+++ b/fs/ocfs2/cluster/netdebug.c
@@ -207,7 +207,7 @@
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations nst_seq_fops = {
+static const struct file_operations nst_seq_fops = {
 	.open = nst_fop_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -294,10 +294,10 @@
 		if (sc->sc_sock) {
 			inet = inet_sk(sc->sc_sock->sk);
 			/* the stack's structs aren't sparse endian clean */
-			saddr = (__force __be32)inet->saddr;
-			daddr = (__force __be32)inet->daddr;
-			sport = (__force __be16)inet->sport;
-			dport = (__force __be16)inet->dport;
+			saddr = (__force __be32)inet->inet_saddr;
+			daddr = (__force __be32)inet->inet_daddr;
+			sport = (__force __be16)inet->inet_sport;
+			dport = (__force __be16)inet->inet_dport;
 		}
 
 		/* XXX sigh, inet-> doesn't have sparse annotation so any
@@ -388,7 +388,7 @@
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations sc_seq_fops = {
+static const struct file_operations sc_seq_fops = {
 	.open = sc_fop_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
diff --git a/fs/ocfs2/dlm/dlmdebug.c b/fs/ocfs2/dlm/dlmdebug.c
index ca46002..42b0bad 100644
--- a/fs/ocfs2/dlm/dlmdebug.c
+++ b/fs/ocfs2/dlm/dlmdebug.c
@@ -478,7 +478,7 @@
 	return -ENOMEM;
 }
 
-static struct file_operations debug_purgelist_fops = {
+static const struct file_operations debug_purgelist_fops = {
 	.open =		debug_purgelist_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
@@ -538,7 +538,7 @@
 	return -ENOMEM;
 }
 
-static struct file_operations debug_mle_fops = {
+static const struct file_operations debug_mle_fops = {
 	.open =		debug_mle_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
@@ -741,7 +741,7 @@
 	return seq_release_private(inode, file);
 }
 
-static struct file_operations debug_lockres_fops = {
+static const struct file_operations debug_lockres_fops = {
 	.open =		debug_lockres_open,
 	.release =	debug_lockres_release,
 	.read =		seq_read,
@@ -925,7 +925,7 @@
 	return -ENOMEM;
 }
 
-static struct file_operations debug_state_fops = {
+static const struct file_operations debug_state_fops = {
 	.open =		debug_state_open,
 	.release =	debug_buffer_release,
 	.read =		debug_buffer_read,
diff --git a/fs/ocfs2/mmap.c b/fs/ocfs2/mmap.c
index b606496..3973761 100644
--- a/fs/ocfs2/mmap.c
+++ b/fs/ocfs2/mmap.c
@@ -202,7 +202,7 @@
 	return ret;
 }
 
-static struct vm_operations_struct ocfs2_file_vm_ops = {
+static const struct vm_operations_struct ocfs2_file_vm_ops = {
 	.fault		= ocfs2_fault,
 	.page_mkwrite	= ocfs2_page_mkwrite,
 };
diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c
index 4cc3c89..c0e48ae 100644
--- a/fs/ocfs2/super.c
+++ b/fs/ocfs2/super.c
@@ -373,7 +373,7 @@
 }
 #endif	/* CONFIG_DEBUG_FS */
 
-static struct file_operations ocfs2_osb_debug_fops = {
+static const struct file_operations ocfs2_osb_debug_fops = {
 	.open =		ocfs2_osb_debug_open,
 	.release =	ocfs2_debug_release,
 	.read =		ocfs2_debug_read,
diff --git a/fs/omfs/dir.c b/fs/omfs/dir.c
index 3680bae..b42d624 100644
--- a/fs/omfs/dir.c
+++ b/fs/omfs/dir.c
@@ -498,7 +498,7 @@
 	.rmdir = omfs_rmdir,
 };
 
-struct file_operations omfs_dir_operations = {
+const struct file_operations omfs_dir_operations = {
 	.read = generic_read_dir,
 	.readdir = omfs_readdir,
 	.llseek = generic_file_llseek,
diff --git a/fs/omfs/file.c b/fs/omfs/file.c
index 4845fbb..399487c 100644
--- a/fs/omfs/file.c
+++ b/fs/omfs/file.c
@@ -322,7 +322,7 @@
 	return generic_block_bmap(mapping, block, omfs_get_block);
 }
 
-struct file_operations omfs_file_operations = {
+const struct file_operations omfs_file_operations = {
 	.llseek = generic_file_llseek,
 	.read = do_sync_read,
 	.write = do_sync_write,
diff --git a/fs/omfs/omfs.h b/fs/omfs/omfs.h
index df71039..ebe2fdb 100644
--- a/fs/omfs/omfs.h
+++ b/fs/omfs/omfs.h
@@ -44,14 +44,14 @@
 extern int omfs_clear_range(struct super_block *sb, u64 block, int count);
 
 /* dir.c */
-extern struct file_operations omfs_dir_operations;
+extern const struct file_operations omfs_dir_operations;
 extern const struct inode_operations omfs_dir_inops;
 extern int omfs_make_empty(struct inode *inode, struct super_block *sb);
 extern int omfs_is_bad(struct omfs_sb_info *sbi, struct omfs_header *header,
 			u64 fsblock);
 
 /* file.c */
-extern struct file_operations omfs_file_operations;
+extern const struct file_operations omfs_file_operations;
 extern const struct inode_operations omfs_file_inops;
 extern const struct address_space_operations omfs_aops;
 extern void omfs_make_empty_table(struct buffer_head *bh, int offset);
diff --git a/fs/partitions/check.c b/fs/partitions/check.c
index 7b685e1..f38fee0 100644
--- a/fs/partitions/check.c
+++ b/fs/partitions/check.c
@@ -248,19 +248,11 @@
 		part_stat_read(p, merges[WRITE]),
 		(unsigned long long)part_stat_read(p, sectors[WRITE]),
 		jiffies_to_msecs(part_stat_read(p, ticks[WRITE])),
-		part_in_flight(p),
+		p->in_flight,
 		jiffies_to_msecs(part_stat_read(p, io_ticks)),
 		jiffies_to_msecs(part_stat_read(p, time_in_queue)));
 }
 
-ssize_t part_inflight_show(struct device *dev,
-			struct device_attribute *attr, char *buf)
-{
-	struct hd_struct *p = dev_to_part(dev);
-
-	return sprintf(buf, "%8u %8u\n", p->in_flight[0], p->in_flight[1]);
-}
-
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 ssize_t part_fail_show(struct device *dev,
 		       struct device_attribute *attr, char *buf)
@@ -289,7 +281,6 @@
 static DEVICE_ATTR(size, S_IRUGO, part_size_show, NULL);
 static DEVICE_ATTR(alignment_offset, S_IRUGO, part_alignment_offset_show, NULL);
 static DEVICE_ATTR(stat, S_IRUGO, part_stat_show, NULL);
-static DEVICE_ATTR(inflight, S_IRUGO, part_inflight_show, NULL);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 static struct device_attribute dev_attr_fail =
 	__ATTR(make-it-fail, S_IRUGO|S_IWUSR, part_fail_show, part_fail_store);
@@ -301,7 +292,6 @@
 	&dev_attr_size.attr,
 	&dev_attr_alignment_offset.attr,
 	&dev_attr_stat.attr,
-	&dev_attr_inflight.attr,
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 	&dev_attr_fail.attr,
 #endif
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 0c6bc60..07f77a7 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -322,6 +322,8 @@
 			p->nivcsw);
 }
 
+#ifdef CONFIG_MMU
+
 struct stack_stats {
 	struct vm_area_struct *vma;
 	unsigned long	startpage;
@@ -402,6 +404,11 @@
 		mmput(mm);
 	}
 }
+#else
+static void task_show_stack_usage(struct seq_file *m, struct task_struct *task)
+{
+}
+#endif		/* CONFIG_MMU */
 
 int proc_pid_status(struct seq_file *m, struct pid_namespace *ns,
 			struct pid *pid, struct task_struct *task)
diff --git a/fs/select.c b/fs/select.c
index a201fc3..fd38ce2 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/sched.h>
 #include <linux/syscalls.h>
 #include <linux/module.h>
 #include <linux/slab.h>
diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c
index 2524714..60c702b 100644
--- a/fs/sysfs/bin.c
+++ b/fs/sysfs/bin.c
@@ -40,7 +40,7 @@
 	struct mutex			mutex;
 	void				*buffer;
 	int				mmapped;
-	struct vm_operations_struct 	*vm_ops;
+	const struct vm_operations_struct *vm_ops;
 	struct file			*file;
 	struct hlist_node		list;
 };
@@ -331,7 +331,7 @@
 }
 #endif
 
-static struct vm_operations_struct bin_vm_ops = {
+static const struct vm_operations_struct bin_vm_ops = {
 	.open		= bin_vma_open,
 	.close		= bin_vma_close,
 	.fault		= bin_fault,
diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c
index 2e6481a..1009adc 100644
--- a/fs/ubifs/file.c
+++ b/fs/ubifs/file.c
@@ -1534,7 +1534,7 @@
 	return err;
 }
 
-static struct vm_operations_struct ubifs_file_vm_ops = {
+static const struct vm_operations_struct ubifs_file_vm_ops = {
 	.fault        = filemap_fault,
 	.page_mkwrite = ubifs_vm_page_mkwrite,
 };
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 988d8f8..6293709 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -42,7 +42,7 @@
 
 #include <linux/dcache.h>
 
-static struct vm_operations_struct xfs_file_vm_ops;
+static const struct vm_operations_struct xfs_file_vm_ops;
 
 STATIC ssize_t
 xfs_file_aio_read(
@@ -280,7 +280,7 @@
 	.fsync		= xfs_file_fsync,
 };
 
-static struct vm_operations_struct xfs_file_vm_ops = {
+static const struct vm_operations_struct xfs_file_vm_ops = {
 	.fault		= filemap_fault,
 	.page_mkwrite	= xfs_vm_page_mkwrite,
 };
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 1cef139..3cd9ccd 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -70,7 +70,6 @@
 	ACPI_BUS_TYPE_POWER,
 	ACPI_BUS_TYPE_PROCESSOR,
 	ACPI_BUS_TYPE_THERMAL,
-	ACPI_BUS_TYPE_SYSTEM,
 	ACPI_BUS_TYPE_POWER_BUTTON,
 	ACPI_BUS_TYPE_SLEEP_BUTTON,
 	ACPI_BUS_DEVICE_TYPE_COUNT
@@ -142,10 +141,7 @@
 
 struct acpi_device_flags {
 	u32 dynamic_status:1;
-	u32 hardware_id:1;
-	u32 compatible_ids:1;
 	u32 bus_address:1;
-	u32 unique_id:1;
 	u32 removable:1;
 	u32 ejectable:1;
 	u32 lockable:1;
@@ -154,7 +150,7 @@
 	u32 performance_manageable:1;
 	u32 wake_capable:1;	/* Wakeup(_PRW) supported? */
 	u32 force_power_state:1;
-	u32 reserved:19;
+	u32 reserved:22;
 };
 
 /* File System */
@@ -172,20 +168,23 @@
 typedef char acpi_device_name[40];
 typedef char acpi_device_class[20];
 
+struct acpi_hardware_id {
+	struct list_head list;
+	char *id;
+};
+
 struct acpi_device_pnp {
 	acpi_bus_id bus_id;	/* Object name */
 	acpi_bus_address bus_address;	/* _ADR */
-	char *hardware_id;	/* _HID */
-	struct acpica_device_id_list *cid_list;	/* _CIDs */
 	char *unique_id;	/* _UID */
+	struct list_head ids;		/* _HID and _CIDs */
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
 #define acpi_device_adr(d)	((d)->pnp.bus_address)
-#define acpi_device_hid(d)	((d)->pnp.hardware_id)
-#define acpi_device_uid(d)	((d)->pnp.unique_id)
+char *acpi_device_hid(struct acpi_device *device);
 #define acpi_device_name(d)	((d)->pnp.device_name)
 #define acpi_device_class(d)	((d)->pnp.device_class)
 
@@ -262,7 +261,8 @@
 /* Device */
 
 struct acpi_device {
-	acpi_handle handle;
+	int device_type;
+	acpi_handle handle;		/* no handle for fixed hardware */
 	struct acpi_device *parent;
 	struct list_head children;
 	struct list_head node;
@@ -322,6 +322,8 @@
 
 int acpi_bus_get_device(acpi_handle handle, struct acpi_device **device);
 void acpi_bus_data_handler(acpi_handle handle, void *context);
+acpi_status acpi_bus_get_status_handle(acpi_handle handle,
+				       unsigned long long *sta);
 int acpi_bus_get_status(struct acpi_device *device);
 int acpi_bus_get_power(acpi_handle handle, int *state);
 int acpi_bus_set_power(acpi_handle handle, int state);
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index 9cca3785..66d6106 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,6 +1,7 @@
 #ifndef _ASM_GENERIC_GPIO_H
 #define _ASM_GENERIC_GPIO_H
 
+#include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/errno.h>
 
diff --git a/include/asm-generic/socket.h b/include/asm-generic/socket.h
index 538991c..9a6115e 100644
--- a/include/asm-generic/socket.h
+++ b/include/asm-generic/socket.h
@@ -63,4 +63,5 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
 #endif /* __ASM_GENERIC_SOCKET_H */
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index 29ca8f5..b6e818f 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -721,12 +721,12 @@
 	. = ALIGN(PAGE_SIZE);						\
 	.data : AT(ADDR(.data) - LOAD_OFFSET) {				\
 		INIT_TASK_DATA(inittask)				\
+		NOSAVE_DATA						\
+		PAGE_ALIGNED_DATA(pagealigned)				\
 		CACHELINE_ALIGNED_DATA(cacheline)			\
 		READ_MOSTLY_DATA(cacheline)				\
 		DATA_DATA						\
 		CONSTRUCTORS						\
-		NOSAVE_DATA						\
-		PAGE_ALIGNED_DATA(pagealigned)				\
 	}
 
 #define INIT_TEXT_SECTION(inittext_align)				\
diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h
index ae1e9e1..b69347b 100644
--- a/include/drm/drm_crtc.h
+++ b/include/drm/drm_crtc.h
@@ -387,6 +387,7 @@
  * @get_modes: get mode list for this connector
  * @set_property: property for this connector may need update
  * @destroy: make object go away
+ * @force: notify the driver the connector is forced on
  *
  * Each CRTC may have one or more connectors attached to it.  The functions
  * below allow the core DRM code to control connectors, enumerate available modes,
@@ -401,6 +402,7 @@
 	int (*set_property)(struct drm_connector *connector, struct drm_property *property,
 			     uint64_t val);
 	void (*destroy)(struct drm_connector *connector);
+	void (*force)(struct drm_connector *connector);
 };
 
 struct drm_encoder_funcs {
@@ -429,6 +431,13 @@
 	void *helper_private;
 };
 
+enum drm_connector_force {
+	DRM_FORCE_UNSPECIFIED,
+	DRM_FORCE_OFF,
+	DRM_FORCE_ON,         /* force on analog part normally */
+	DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
 /**
  * drm_connector - central DRM connector control structure
  * @crtc: CRTC this connector is currently connected to, NULL if none
@@ -478,9 +487,12 @@
 
 	void *helper_private;
 
+	/* forced on connector */
+	enum drm_connector_force force;
 	uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
 	uint32_t force_encoder_id;
 	struct drm_encoder *encoder; /* currently active encoder */
+	void *fb_helper_private;
 };
 
 /**
@@ -746,7 +758,7 @@
 extern bool drm_detect_hdmi_monitor(struct edid *edid);
 extern struct drm_display_mode *drm_cvt_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
-				bool reduced, bool interlaced);
+				bool reduced, bool interlaced, bool margins);
 extern struct drm_display_mode *drm_gtf_mode(struct drm_device *dev,
 				int hdisplay, int vdisplay, int vrefresh,
 				bool interlaced, int margins);
diff --git a/include/drm/drm_crtc_helper.h b/include/drm/drm_crtc_helper.h
index 4c8daca..ef47dfd 100644
--- a/include/drm/drm_crtc_helper.h
+++ b/include/drm/drm_crtc_helper.h
@@ -39,6 +39,7 @@
 
 #include <linux/fb.h>
 
+#include "drm_fb_helper.h"
 struct drm_crtc_helper_funcs {
 	/*
 	 * Control power levels on the CRTC.  If the mode passed in is
@@ -119,10 +120,11 @@
 	encoder->helper_private = (void *)funcs;
 }
 
-static inline void drm_connector_helper_add(struct drm_connector *connector,
+static inline int drm_connector_helper_add(struct drm_connector *connector,
 					    const struct drm_connector_helper_funcs *funcs)
 {
 	connector->helper_private = (void *)funcs;
+	return drm_fb_helper_add_connector(connector);
 }
 
 extern int drm_helper_resume_force_mode(struct drm_device *dev);
diff --git a/include/drm/drm_fb_helper.h b/include/drm/drm_fb_helper.h
index 88fffbd..4aa5740 100644
--- a/include/drm/drm_fb_helper.h
+++ b/include/drm/drm_fb_helper.h
@@ -35,11 +35,30 @@
 	struct drm_mode_set mode_set;
 };
 
+
 struct drm_fb_helper_funcs {
 	void (*gamma_set)(struct drm_crtc *crtc, u16 red, u16 green,
 			  u16 blue, int regno);
 };
 
+/* mode specified on the command line */
+struct drm_fb_helper_cmdline_mode {
+	bool specified;
+	bool refresh_specified;
+	bool bpp_specified;
+	int xres, yres;
+	int bpp;
+	int refresh;
+	bool rb;
+	bool interlace;
+	bool cvt;
+	bool margins;
+};
+
+struct drm_fb_helper_connector {
+	struct drm_fb_helper_cmdline_mode cmdline_mode;
+};
+
 struct drm_fb_helper {
 	struct drm_framebuffer *fb;
 	struct drm_device *dev;
@@ -57,6 +76,8 @@
 						   uint32_t fb_height,
 						   uint32_t surface_width,
 						   uint32_t surface_height,
+						   uint32_t surface_depth,
+						   uint32_t surface_bpp,
 						   struct drm_framebuffer **fb_ptr));
 int drm_fb_helper_init_crtc_count(struct drm_fb_helper *helper, int crtc_count,
 				  int max_conn);
@@ -79,4 +100,7 @@
 			    uint32_t fb_width, uint32_t fb_height);
 void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch);
 
+int drm_fb_helper_add_connector(struct drm_connector *connector);
+int drm_fb_helper_parse_command_line(struct drm_device *dev);
+
 #endif
diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h
index 880130f..9101ed64 100644
--- a/include/linux/agp_backend.h
+++ b/include/linux/agp_backend.h
@@ -53,7 +53,7 @@
 	int current_memory;
 	bool cant_use_aperture;
 	unsigned long page_mask;
-	struct vm_operations_struct *vm_ops;
+	const struct vm_operations_struct *vm_ops;
 };
 
 /*
diff --git a/arch/arm/include/asm/mach/mmc.h b/include/linux/amba/mmci.h
similarity index 63%
rename from arch/arm/include/asm/mach/mmc.h
rename to include/linux/amba/mmci.h
index b490ecc..6b42417 100644
--- a/arch/arm/include/asm/mach/mmc.h
+++ b/include/linux/amba/mmci.h
@@ -1,17 +1,18 @@
 /*
- *  arch/arm/include/asm/mach/mmc.h
+ *  include/linux/amba/mmci.h
  */
-#ifndef ASMARM_MACH_MMC_H
-#define ASMARM_MACH_MMC_H
+#ifndef AMBA_MMCI_H
+#define AMBA_MMCI_H
 
 #include <linux/mmc/host.h>
 
-struct mmc_platform_data {
+struct mmci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
 	u32 (*translate_vdd)(struct device *, unsigned int);
 	unsigned int (*status)(struct device *);
 	int	gpio_wp;
 	int	gpio_cd;
+	unsigned long capabilities;
 };
 
 #endif
diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h
index dcad0ff..e4836c6b 100644
--- a/include/linux/amba/pl022.h
+++ b/include/linux/amba/pl022.h
@@ -136,12 +136,12 @@
 
 /**
  * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
- * @SSP_CLK_RISING_EDGE: Receive data on rising edge
- * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ * @SSP_CLK_FIRST_EDGE: Receive data on first edge transition (actual direction depends on polarity)
+ * @SSP_CLK_SECOND_EDGE: Receive data on second edge transition (actual direction depends on polarity)
  */
 enum ssp_spi_clk_phase {
-	SSP_CLK_RISING_EDGE,
-	SSP_CLK_FALLING_EDGE
+	SSP_CLK_FIRST_EDGE,
+	SSP_CLK_SECOND_EDGE
 };
 
 /**
diff --git a/include/linux/backing-dev.h b/include/linux/backing-dev.h
index 0ee33c2..b449e73 100644
--- a/include/linux/backing-dev.h
+++ b/include/linux/backing-dev.h
@@ -101,7 +101,8 @@
 		const char *fmt, ...);
 int bdi_register_dev(struct backing_dev_info *bdi, dev_t dev);
 void bdi_unregister(struct backing_dev_info *bdi);
-void bdi_start_writeback(struct backing_dev_info *bdi, long nr_pages);
+void bdi_start_writeback(struct backing_dev_info *bdi, struct super_block *sb,
+				long nr_pages);
 int bdi_writeback_task(struct bdi_writeback *wb);
 int bdi_has_dirty_io(struct backing_dev_info *bdi);
 
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index 79ca2da..0f5f578 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -27,6 +27,11 @@
  * Any other use of the locks below is probably wrong.
  */
 
+enum backlight_update_reason {
+	BACKLIGHT_UPDATE_HOTKEY,
+	BACKLIGHT_UPDATE_SYSFS,
+};
+
 struct backlight_device;
 struct fb_info;
 
@@ -100,6 +105,8 @@
 extern struct backlight_device *backlight_device_register(const char *name,
 	struct device *dev, void *devdata, struct backlight_ops *ops);
 extern void backlight_device_unregister(struct backlight_device *bd);
+extern void backlight_force_update(struct backlight_device *bd,
+				   enum backlight_update_reason reason);
 
 #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
 
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index e23a86c..2511904 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -82,7 +82,6 @@
 enum {
 	REQ_LB_OP_EJECT	= 0x40,		/* eject request */
 	REQ_LB_OP_FLUSH = 0x41,		/* flush request */
-	REQ_LB_OP_DISCARD = 0x42,	/* discard sectors */
 };
 
 /*
@@ -261,7 +260,6 @@
 typedef int (make_request_fn) (struct request_queue *q, struct bio *bio);
 typedef int (prep_rq_fn) (struct request_queue *, struct request *);
 typedef void (unplug_fn) (struct request_queue *);
-typedef int (prepare_discard_fn) (struct request_queue *, struct request *);
 
 struct bio_vec;
 struct bvec_merge_data {
@@ -313,6 +311,7 @@
 	unsigned int		alignment_offset;
 	unsigned int		io_min;
 	unsigned int		io_opt;
+	unsigned int		max_discard_sectors;
 
 	unsigned short		logical_block_size;
 	unsigned short		max_hw_segments;
@@ -340,7 +339,6 @@
 	make_request_fn		*make_request_fn;
 	prep_rq_fn		*prep_rq_fn;
 	unplug_fn		*unplug_fn;
-	prepare_discard_fn	*prepare_discard_fn;
 	merge_bvec_fn		*merge_bvec_fn;
 	prepare_flush_fn	*prepare_flush_fn;
 	softirq_done_fn		*softirq_done_fn;
@@ -460,6 +458,7 @@
 #define QUEUE_FLAG_VIRT        QUEUE_FLAG_NONROT /* paravirt device */
 #define QUEUE_FLAG_IO_STAT     15	/* do IO stats */
 #define QUEUE_FLAG_CQ	       16	/* hardware does queuing */
+#define QUEUE_FLAG_DISCARD     17	/* supports DISCARD */
 
 #define QUEUE_FLAG_DEFAULT	((1 << QUEUE_FLAG_IO_STAT) |		\
 				 (1 << QUEUE_FLAG_CLUSTER) |		\
@@ -591,6 +590,7 @@
 #define blk_queue_flushing(q)	((q)->ordseq)
 #define blk_queue_stackable(q)	\
 	test_bit(QUEUE_FLAG_STACKABLE, &(q)->queue_flags)
+#define blk_queue_discard(q)	test_bit(QUEUE_FLAG_DISCARD, &(q)->queue_flags)
 
 #define blk_fs_request(rq)	((rq)->cmd_type == REQ_TYPE_FS)
 #define blk_pc_request(rq)	((rq)->cmd_type == REQ_TYPE_BLOCK_PC)
@@ -929,6 +929,8 @@
 extern void blk_queue_max_phys_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_hw_segments(struct request_queue *, unsigned short);
 extern void blk_queue_max_segment_size(struct request_queue *, unsigned int);
+extern void blk_queue_max_discard_sectors(struct request_queue *q,
+		unsigned int max_discard_sectors);
 extern void blk_queue_logical_block_size(struct request_queue *, unsigned short);
 extern void blk_queue_physical_block_size(struct request_queue *, unsigned short);
 extern void blk_queue_alignment_offset(struct request_queue *q,
@@ -955,7 +957,6 @@
 extern void blk_queue_dma_alignment(struct request_queue *, int);
 extern void blk_queue_update_dma_alignment(struct request_queue *, int);
 extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
-extern void blk_queue_set_discard(struct request_queue *, prepare_discard_fn *);
 extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
 extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
 extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
@@ -1080,25 +1081,37 @@
 	return q->limits.physical_block_size;
 }
 
+static inline int bdev_physical_block_size(struct block_device *bdev)
+{
+	return queue_physical_block_size(bdev_get_queue(bdev));
+}
+
 static inline unsigned int queue_io_min(struct request_queue *q)
 {
 	return q->limits.io_min;
 }
 
+static inline int bdev_io_min(struct block_device *bdev)
+{
+	return queue_io_min(bdev_get_queue(bdev));
+}
+
 static inline unsigned int queue_io_opt(struct request_queue *q)
 {
 	return q->limits.io_opt;
 }
 
+static inline int bdev_io_opt(struct block_device *bdev)
+{
+	return queue_io_opt(bdev_get_queue(bdev));
+}
+
 static inline int queue_alignment_offset(struct request_queue *q)
 {
-	if (q && q->limits.misaligned)
+	if (q->limits.misaligned)
 		return -1;
 
-	if (q && q->limits.alignment_offset)
-		return q->limits.alignment_offset;
-
-	return 0;
+	return q->limits.alignment_offset;
 }
 
 static inline int queue_sector_alignment_offset(struct request_queue *q,
@@ -1108,6 +1121,19 @@
 		& (q->limits.io_min - 1);
 }
 
+static inline int bdev_alignment_offset(struct block_device *bdev)
+{
+	struct request_queue *q = bdev_get_queue(bdev);
+
+	if (q->limits.misaligned)
+		return -1;
+
+	if (bdev != bdev->bd_contains)
+		return bdev->bd_part->alignment_offset;
+
+	return q->limits.alignment_offset;
+}
+
 static inline int queue_dma_alignment(struct request_queue *q)
 {
 	return q ? q->dma_alignment : 511;
@@ -1146,7 +1172,11 @@
 }
 
 struct work_struct;
+struct delayed_work;
 int kblockd_schedule_work(struct request_queue *q, struct work_struct *work);
+int kblockd_schedule_delayed_work(struct request_queue *q,
+					struct delayed_work *work,
+				 	unsigned long delay);
 
 #define MODULE_ALIAS_BLOCKDEV(major,minor) \
 	MODULE_ALIAS("block-major-" __stringify(major) "-" __stringify(minor))
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index 7e4350e..3b73b99 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -198,6 +198,7 @@
 			   char __user *arg);
 extern int blk_trace_startstop(struct request_queue *q, int start);
 extern int blk_trace_remove(struct request_queue *q);
+extern void blk_trace_remove_sysfs(struct device *dev);
 extern int blk_trace_init_sysfs(struct device *dev);
 
 extern struct attribute_group blk_trace_attr_group;
@@ -211,6 +212,7 @@
 # define blk_trace_startstop(q, start)			(-ENOTTY)
 # define blk_trace_remove(q)				(-ENOTTY)
 # define blk_add_trace_msg(q, fmt, ...)			do { } while (0)
+# define blk_trace_remove_sysfs(dev)			do { } while (0)
 static inline int blk_trace_init_sysfs(struct device *dev)
 {
 	return 0;
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 9b64b6d..2b31b91 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -1,6 +1,13 @@
-#define PHY_BRCM_WIRESPEED_ENABLE	0x00000001
-#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000002
-#define PHY_BRCM_APD_CLK125_ENABLE	0x00000004
-#define PHY_BRCM_STD_IBND_DISABLE	0x00000008
-#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00000010
-#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00000020
+#define PHY_BCM_FLAGS_MODE_COPPER	0x00000001
+#define PHY_BCM_FLAGS_MODE_1000BX	0x00000002
+#define PHY_BCM_FLAGS_INTF_SGMII	0x00000010
+#define PHY_BCM_FLAGS_INTF_XAUI		0x00000020
+#define PHY_BRCM_WIRESPEED_ENABLE	0x00000100
+#define PHY_BRCM_AUTO_PWRDWN_ENABLE	0x00000200
+#define PHY_BRCM_RX_REFCLK_UNUSED	0x00000400
+#define PHY_BRCM_STD_IBND_DISABLE	0x00000800
+#define PHY_BRCM_EXT_IBND_RX_ENABLE	0x00001000
+#define PHY_BRCM_EXT_IBND_TX_ENABLE	0x00002000
+#define PHY_BRCM_CLEAR_RGMII_MODE	0x00004000
+#define PHY_BRCM_DIS_TXCRXC_NOENRGY	0x00008000
+#define PHY_BCM_FLAGS_VALID		0x80000000
diff --git a/include/linux/can/core.h b/include/linux/can/core.h
index 25085cb..6c507be 100644
--- a/include/linux/can/core.h
+++ b/include/linux/can/core.h
@@ -32,14 +32,12 @@
  * struct can_proto - CAN protocol structure
  * @type:       type argument in socket() syscall, e.g. SOCK_DGRAM.
  * @protocol:   protocol number in socket() syscall.
- * @capability: capability needed to open the socket, or -1 for no restriction.
  * @ops:        pointer to struct proto_ops for sock->ops.
  * @prot:       pointer to struct proto structure.
  */
 struct can_proto {
 	int              type;
 	int              protocol;
-	int              capability;
 	struct proto_ops *ops;
 	struct proto     *prot;
 };
diff --git a/include/linux/can/dev.h b/include/linux/can/dev.h
index 5824b20..1ed2a5c 100644
--- a/include/linux/can/dev.h
+++ b/include/linux/can/dev.h
@@ -29,8 +29,6 @@
 /*
  * CAN common private data
  */
-#define CAN_ECHO_SKB_MAX  4
-
 struct can_priv {
 	struct can_device_stats can_stats;
 
@@ -44,15 +42,16 @@
 	int restart_ms;
 	struct timer_list restart_timer;
 
-	struct sk_buff *echo_skb[CAN_ECHO_SKB_MAX];
-
 	int (*do_set_bittiming)(struct net_device *dev);
 	int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
 	int (*do_get_state)(const struct net_device *dev,
 			    enum can_state *state);
+
+	unsigned int echo_skb_max;
+	struct sk_buff **echo_skb;
 };
 
-struct net_device *alloc_candev(int sizeof_priv);
+struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
 void free_candev(struct net_device *dev);
 
 int open_candev(struct net_device *dev);
@@ -64,8 +63,13 @@
 int can_restart_now(struct net_device *dev);
 void can_bus_off(struct net_device *dev);
 
-void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, int idx);
-void can_get_echo_skb(struct net_device *dev, int idx);
-void can_free_echo_skb(struct net_device *dev, int idx);
+void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
+		      unsigned int idx);
+void can_get_echo_skb(struct net_device *dev, unsigned int idx);
+void can_free_echo_skb(struct net_device *dev, unsigned int idx);
+
+struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
+struct sk_buff *alloc_can_err_skb(struct net_device *dev,
+				  struct can_frame **cf);
 
 #endif /* CAN_DEV_H */
diff --git a/include/linux/can/platform/ti_hecc.h b/include/linux/can/platform/ti_hecc.h
new file mode 100644
index 0000000..4688c7b
--- /dev/null
+++ b/include/linux/can/platform/ti_hecc.h
@@ -0,0 +1,40 @@
+/*
+ * TI HECC (High End CAN Controller) driver platform header
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed as is WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+/**
+ * struct hecc_platform_data - HECC Platform Data
+ *
+ * @scc_hecc_offset:	mostly 0 - should really never change
+ * @scc_ram_offset:	SCC RAM offset
+ * @hecc_ram_offset:	HECC RAM offset
+ * @mbx_offset:		Mailbox RAM offset
+ * @int_line:		Interrupt line to use - 0 or 1
+ * @version:		version for future use
+ *
+ * Platform data structure to get all platform specific settings.
+ * this structure also accounts the fact that the IP may have different
+ * RAM and mailbox offsets for different SOC's
+ */
+struct ti_hecc_platform_data {
+	u32 scc_hecc_offset;
+	u32 scc_ram_offset;
+	u32 hecc_ram_offset;
+	u32 mbx_offset;
+	u32 int_line;
+	u32 version;
+};
+
+
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index b62bb92..0008dee 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -37,7 +37,7 @@
 extern int cgroupstats_build(struct cgroupstats *stats,
 				struct dentry *dentry);
 
-extern struct file_operations proc_cgroup_operations;
+extern const struct file_operations proc_cgroup_operations;
 
 /* Define the enumeration of all cgroup subsystems */
 #define SUBSYS(_x) _x ## _subsys_id,
diff --git a/include/linux/dn.h b/include/linux/dn.h
index fe99908..9c50445 100644
--- a/include/linux/dn.h
+++ b/include/linux/dn.h
@@ -71,14 +71,12 @@
 /* Structures */
 
 
-struct dn_naddr 
-{
+struct dn_naddr {
 	__le16		a_len;
 	__u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */
 };
 
-struct sockaddr_dn
-{
+struct sockaddr_dn {
 	__u16		sdn_family;
 	__u8		sdn_flags;
 	__u8		sdn_objnum;
@@ -101,8 +99,7 @@
         __u8   opt_data[16];   /* User data              */
 };
 
-struct accessdata_dn
-{
+struct accessdata_dn {
 	__u8		acc_accl;
 	__u8		acc_acc[DN_MAXACCL];
 	__u8 		acc_passl;
diff --git a/include/linux/errqueue.h b/include/linux/errqueue.h
index ec12cc743..034072c 100644
--- a/include/linux/errqueue.h
+++ b/include/linux/errqueue.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-struct sock_extended_err
-{
+struct sock_extended_err {
 	__u32	ee_errno;	
 	__u8	ee_origin;
 	__u8	ee_type;
@@ -31,8 +30,7 @@
 
 #define SKB_EXT_ERR(skb) ((struct sock_exterr_skb *) ((skb)->cb))
 
-struct sock_exterr_skb
-{
+struct sock_exterr_skb {
 	union {
 		struct inet_skb_parm	h4;
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index 15e4eb7..edd03b7 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -495,13 +495,10 @@
 	u32     (*get_priv_flags)(struct net_device *);
 	int     (*set_priv_flags)(struct net_device *, u32);
 	int	(*get_sset_count)(struct net_device *, int);
-
-	/* the following hooks are obsolete */
-	int	(*self_test_count)(struct net_device *);/* use get_sset_count */
-	int	(*get_stats_count)(struct net_device *);/* use get_sset_count */
 	int	(*get_rxnfc)(struct net_device *, struct ethtool_rxnfc *, void *);
 	int	(*set_rxnfc)(struct net_device *, struct ethtool_rxnfc *);
 	int     (*flash_device)(struct net_device *, struct ethtool_flash *);
+	int	(*reset)(struct net_device *, u32 *);
 };
 #endif /* __KERNEL__ */
 
@@ -559,6 +556,7 @@
 #define	ETHTOOL_SRXCLSRLDEL	0x00000031 /* Delete RX classification rule */
 #define	ETHTOOL_SRXCLSRLINS	0x00000032 /* Insert RX classification rule */
 #define	ETHTOOL_FLASHDEV	0x00000033 /* Flash firmware to device */
+#define	ETHTOOL_RESET		0x00000034 /* Reset hardware */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET
@@ -676,6 +674,8 @@
 #define	AH_V6_FLOW	0x0b
 #define	ESP_V6_FLOW	0x0c
 #define	IP_USER_FLOW	0x0d
+#define IPV4_FLOW       0x10
+#define IPV6_FLOW       0x11
 
 /* L3-L4 network traffic flow hash options */
 #define	RXH_L2DA	(1 << 1)
@@ -689,4 +689,34 @@
 
 #define	RX_CLS_FLOW_DISC	0xffffffffffffffffULL
 
+/* Reset flags */
+/* The reset() operation must clear the flags for the components which
+ * were actually reset.  On successful return, the flags indicate the
+ * components which were not reset, either because they do not exist
+ * in the hardware or because they cannot be reset independently.  The
+ * driver must never reset any components that were not requested.
+ */
+enum ethtool_reset_flags {
+	/* These flags represent components dedicated to the interface
+	 * the command is addressed to.  Shift any flag left by
+	 * ETH_RESET_SHARED_SHIFT to reset a shared component of the
+	 * same type.
+	 */
+	ETH_RESET_MGMT		= 1 << 0,	/* Management processor */
+	ETH_RESET_IRQ		= 1 << 1,	/* Interrupt requester */
+	ETH_RESET_DMA		= 1 << 2,	/* DMA engine */
+	ETH_RESET_FILTER	= 1 << 3,	/* Filtering/flow direction */
+	ETH_RESET_OFFLOAD	= 1 << 4,	/* Protocol offload */
+	ETH_RESET_MAC		= 1 << 5,	/* Media access controller */
+	ETH_RESET_PHY		= 1 << 6,	/* Transceiver/PHY */
+	ETH_RESET_RAM		= 1 << 7,	/* RAM shared between
+						 * multiple components */
+
+	ETH_RESET_DEDICATED	= 0x0000ffff,	/* All components dedicated to
+						 * this interface */
+	ETH_RESET_ALL		= 0xffffffff,	/* All components used by this
+						 * interface, even if shared */
+};
+#define ETH_RESET_SHARED_SHIFT	16
+
 #endif /* _LINUX_ETHTOOL_H */
diff --git a/include/linux/fb.h b/include/linux/fb.h
index f847df9..a34bdf5 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -133,6 +133,7 @@
 #define FB_ACCEL_NEOMAGIC_NM2230 96	/* NeoMagic NM2230              */
 #define FB_ACCEL_NEOMAGIC_NM2360 97	/* NeoMagic NM2360              */
 #define FB_ACCEL_NEOMAGIC_NM2380 98	/* NeoMagic NM2380              */
+#define FB_ACCEL_PXA3XX		 99	/* PXA3xx			*/
 
 #define FB_ACCEL_SAVAGE4        0x80	/* S3 Savage4                   */
 #define FB_ACCEL_SAVAGE3D       0x81	/* S3 Savage3D                  */
diff --git a/include/linux/fib_rules.h b/include/linux/fib_rules.h
index 87b606b..c7e5b70 100644
--- a/include/linux/fib_rules.h
+++ b/include/linux/fib_rules.h
@@ -13,8 +13,7 @@
 /* try to find source address in routing lookups */
 #define FIB_RULE_FIND_SADDR	0x00010000
 
-struct fib_rule_hdr
-{
+struct fib_rule_hdr {
 	__u8		family;
 	__u8		dst_len;
 	__u8		src_len;
@@ -28,8 +27,7 @@
 	__u32		flags;
 };
 
-enum
-{
+enum {
 	FRA_UNSPEC,
 	FRA_DST,	/* destination address */
 	FRA_SRC,	/* source address */
@@ -52,8 +50,7 @@
 
 #define FRA_MAX (__FRA_MAX - 1)
 
-enum
-{
+enum {
 	FR_ACT_UNSPEC,
 	FR_ACT_TO_TBL,		/* Pass to fixed table */
 	FR_ACT_GOTO,		/* Jump to another rule */
diff --git a/include/linux/filter.h b/include/linux/filter.h
index 1354aaf..29a0e3d 100644
--- a/include/linux/filter.h
+++ b/include/linux/filter.h
@@ -23,16 +23,14 @@
  *	the BPF code definitions which need to match so you can share filters
  */
  
-struct sock_filter	/* Filter block */
-{
+struct sock_filter {	/* Filter block */
 	__u16	code;   /* Actual filter code */
 	__u8	jt;	/* Jump true */
 	__u8	jf;	/* Jump false */
 	__u32	k;      /* Generic multiuse field */
 };
 
-struct sock_fprog	/* Required for SO_ATTACH_FILTER. */
-{
+struct sock_fprog {	/* Required for SO_ATTACH_FILTER. */
 	unsigned short		len;	/* Number of filter blocks */
 	struct sock_filter __user *filter;
 };
@@ -123,7 +121,9 @@
 #define SKF_AD_IFINDEX 	8
 #define SKF_AD_NLATTR	12
 #define SKF_AD_NLATTR_NEST	16
-#define SKF_AD_MAX	20
+#define SKF_AD_MARK 	20
+#define SKF_AD_QUEUE	24
+#define SKF_AD_MAX	28
 #define SKF_NET_OFF   (-0x100000)
 #define SKF_LL_OFF    (-0x200000)
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 2adaa25..2620a8c 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -300,6 +300,10 @@
 #define BLKTRACESTOP _IO(0x12,117)
 #define BLKTRACETEARDOWN _IO(0x12,118)
 #define BLKDISCARD _IO(0x12,119)
+#define BLKIOMIN _IO(0x12,120)
+#define BLKIOOPT _IO(0x12,121)
+#define BLKALIGNOFF _IO(0x12,122)
+#define BLKPBSZGET _IO(0x12,123)
 
 #define BMAP_IOCTL 1		/* obsolete - kept for compatibility */
 #define FIBMAP	   _IO(0x00,1)	/* bmap access */
@@ -2446,7 +2450,7 @@
 	__simple_attr_check_format(__fmt, 0ull);			\
 	return simple_attr_open(inode, file, __get, __set, __fmt);	\
 }									\
-static struct file_operations __fops = {				\
+static const struct file_operations __fops = {				\
 	.owner	 = THIS_MODULE,						\
 	.open	 = __fops ## _open,					\
 	.release = simple_attr_release,					\
diff --git a/include/linux/gen_stats.h b/include/linux/gen_stats.h
index 710e901..552c8a0 100644
--- a/include/linux/gen_stats.h
+++ b/include/linux/gen_stats.h
@@ -18,13 +18,11 @@
  * @bytes: number of seen bytes
  * @packets: number of seen packets
  */
-struct gnet_stats_basic
-{
+struct gnet_stats_basic {
 	__u64	bytes;
 	__u32	packets;
 };
-struct gnet_stats_basic_packed
-{
+struct gnet_stats_basic_packed {
 	__u64	bytes;
 	__u32	packets;
 } __attribute__ ((packed));
@@ -34,8 +32,7 @@
  * @bps: current byte rate
  * @pps: current packet rate
  */
-struct gnet_stats_rate_est
-{
+struct gnet_stats_rate_est {
 	__u32	bps;
 	__u32	pps;
 };
@@ -48,8 +45,7 @@
  * @requeues: number of requeues
  * @overlimits: number of enqueues over the limit
  */
-struct gnet_stats_queue
-{
+struct gnet_stats_queue {
 	__u32	qlen;
 	__u32	backlog;
 	__u32	drops;
@@ -62,8 +58,7 @@
  * @interval: sampling period
  * @ewma_log: the log of measurement window weight
  */
-struct gnet_estimator
-{
+struct gnet_estimator {
 	signed char	interval;
 	unsigned char	ewma_log;
 };
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index 297df45..7beaa21 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -98,7 +98,7 @@
 	int make_it_fail;
 #endif
 	unsigned long stamp;
-	int in_flight[2];
+	int in_flight;
 #ifdef	CONFIG_SMP
 	struct disk_stats *dkstats;
 #else
@@ -322,23 +322,18 @@
 #define part_stat_sub(cpu, gendiskp, field, subnd)			\
 	part_stat_add(cpu, gendiskp, field, -subnd)
 
-static inline void part_inc_in_flight(struct hd_struct *part, int rw)
+static inline void part_inc_in_flight(struct hd_struct *part)
 {
-	part->in_flight[rw]++;
+	part->in_flight++;
 	if (part->partno)
-		part_to_disk(part)->part0.in_flight[rw]++;
+		part_to_disk(part)->part0.in_flight++;
 }
 
-static inline void part_dec_in_flight(struct hd_struct *part, int rw)
+static inline void part_dec_in_flight(struct hd_struct *part)
 {
-	part->in_flight[rw]--;
+	part->in_flight--;
 	if (part->partno)
-		part_to_disk(part)->part0.in_flight[rw]--;
-}
-
-static inline int part_in_flight(struct hd_struct *part)
-{
-	return part->in_flight[0] + part->in_flight[1];
+		part_to_disk(part)->part0.in_flight--;
 }
 
 /* block/blk-core.c */
@@ -551,8 +546,6 @@
 			      struct device_attribute *attr, char *buf);
 extern ssize_t part_stat_show(struct device *dev,
 			      struct device_attribute *attr, char *buf);
-extern ssize_t part_inflight_show(struct device *dev,
-			      struct device_attribute *attr, char *buf);
 #ifdef CONFIG_FAIL_MAKE_REQUEST
 extern ssize_t part_fail_show(struct device *dev,
 			      struct device_attribute *attr, char *buf);
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index 11ab19a..41a59af 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -3,15 +3,15 @@
 
 #include <linux/fs.h>
 
+struct ctl_table;
+struct user_struct;
+
 #ifdef CONFIG_HUGETLB_PAGE
 
 #include <linux/mempolicy.h>
 #include <linux/shm.h>
 #include <asm/tlbflush.h>
 
-struct ctl_table;
-struct user_struct;
-
 int PageHuge(struct page *page);
 
 static inline int is_vm_hugetlb_page(struct vm_area_struct *vma)
@@ -163,7 +163,7 @@
 }
 
 extern const struct file_operations hugetlbfs_file_operations;
-extern struct vm_operations_struct hugetlb_vm_ops;
+extern const struct vm_operations_struct hugetlb_vm_ops;
 struct file *hugetlb_file_setup(const char *name, size_t size, int acct,
 				struct user_struct **user, int creat_flags);
 int hugetlb_get_quota(struct address_space *mapping, long delta);
@@ -187,7 +187,11 @@
 
 #define is_file_hugepages(file)			0
 #define set_file_hugepages(file)		BUG()
-#define hugetlb_file_setup(name,size,acct,user,creat)	ERR_PTR(-ENOSYS)
+static inline struct file *hugetlb_file_setup(const char *name, size_t size,
+		int acctflag, struct user_struct **user, int creat_flags)
+{
+	return ERR_PTR(-ENOSYS);
+}
 
 #endif /* !CONFIG_HUGETLBFS */
 
diff --git a/include/linux/if.h b/include/linux/if.h
index b9a6229..3b2a46b 100644
--- a/include/linux/if.h
+++ b/include/linux/if.h
@@ -125,8 +125,7 @@
  *	being very small might be worth keeping for clean configuration.
  */
 
-struct ifmap 
-{
+struct ifmap {
 	unsigned long mem_start;
 	unsigned long mem_end;
 	unsigned short base_addr; 
@@ -136,8 +135,7 @@
 	/* 3 bytes spare */
 };
 
-struct if_settings
-{
+struct if_settings {
 	unsigned int type;	/* Type of physical device or protocol */
 	unsigned int size;	/* Size of the data allocated by the caller */
 	union {
@@ -161,8 +159,7 @@
  * remainder may be interface specific.
  */
 
-struct ifreq 
-{
+struct ifreq {
 #define IFHWADDRLEN	6
 	union
 	{
@@ -211,11 +208,9 @@
  * must know all networks accessible).
  */
 
-struct ifconf 
-{
+struct ifconf  {
 	int	ifc_len;			/* size of buffer	*/
-	union 
-	{
+	union {
 		char __user *ifcu_buf;
 		struct ifreq __user *ifcu_req;
 	} ifc_ifcu;
diff --git a/include/linux/if_addr.h b/include/linux/if_addr.h
index fd97404..23357ab 100644
--- a/include/linux/if_addr.h
+++ b/include/linux/if_addr.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/netlink.h>
 
-struct ifaddrmsg
-{
+struct ifaddrmsg {
 	__u8		ifa_family;
 	__u8		ifa_prefixlen;	/* The prefix length		*/
 	__u8		ifa_flags;	/* Flags			*/
@@ -20,8 +19,7 @@
  * but for point-to-point IFA_ADDRESS is DESTINATION address,
  * local address is supplied in IFA_LOCAL attribute.
  */
-enum
-{
+enum {
 	IFA_UNSPEC,
 	IFA_ADDRESS,
 	IFA_LOCAL,
@@ -47,8 +45,7 @@
 #define IFA_F_TENTATIVE		0x40
 #define IFA_F_PERMANENT		0x80
 
-struct ifa_cacheinfo
-{
+struct ifa_cacheinfo {
 	__u32	ifa_prefered;
 	__u32	ifa_valid;
 	__u32	cstamp; /* created timestamp, hundredths of seconds */
diff --git a/include/linux/if_addrlabel.h b/include/linux/if_addrlabel.h
index 89571f6..54580c2 100644
--- a/include/linux/if_addrlabel.h
+++ b/include/linux/if_addrlabel.h
@@ -12,8 +12,7 @@
 
 #include <linux/types.h>
 
-struct ifaddrlblmsg
-{
+struct ifaddrlblmsg {
 	__u8		ifal_family;		/* Address family */
 	__u8		__ifal_reserved;	/* Reserved */
 	__u8		ifal_prefixlen;		/* Prefix length */
@@ -22,8 +21,7 @@
 	__u32		ifal_seq;		/* sequence number */
 };
 
-enum
-{
+enum {
 	IFAL_ADDRESS = 1,
 	IFAL_LABEL = 2,
 	__IFAL_MAX
diff --git a/include/linux/if_arcnet.h b/include/linux/if_arcnet.h
index 0835deb..46e34bd 100644
--- a/include/linux/if_arcnet.h
+++ b/include/linux/if_arcnet.h
@@ -56,8 +56,7 @@
 /*
  * The RFC1201-specific components of an arcnet packet header.
  */
-struct arc_rfc1201
-{
+struct arc_rfc1201 {
     __u8  proto;		/* protocol ID field - varies		*/
     __u8  split_flag;	/* for use with split packets		*/
     __be16   sequence;		/* sequence number			*/
@@ -69,8 +68,7 @@
 /*
  * The RFC1051-specific components.
  */
-struct arc_rfc1051
-{
+struct arc_rfc1051 {
     __u8 proto;		/* ARC_P_RFC1051_ARP/RFC1051_IP	*/
     __u8 payload[0];		/* 507 bytes			*/
 };
@@ -81,8 +79,7 @@
  * The ethernet-encap-specific components.  We have a real ethernet header
  * and some data.
  */
-struct arc_eth_encap
-{
+struct arc_eth_encap {
     __u8 proto;		/* Always ARC_P_ETHER			*/
     struct ethhdr eth;		/* standard ethernet header (yuck!)	*/
     __u8 payload[0];		/* 493 bytes				*/
@@ -90,8 +87,7 @@
 #define ETH_ENCAP_HDR_SIZE 14
 
 
-struct arc_cap
-{
+struct arc_cap {
 	__u8 proto;
 	__u8 cookie[sizeof(int)];   /* Actually NOT sent over the network */
 	union {
@@ -108,8 +104,7 @@
  * the _end_ of the 512-byte buffer.  We hide this complexity inside the
  * driver.
  */
-struct arc_hardware
-{
+struct arc_hardware {
     __u8  source,		/* source ARCnet - filled in automagically */
              dest,		/* destination ARCnet - 0 for broadcast    */
     	     offset[2];		/* offset bytes (some weird semantics)     */
@@ -120,8 +115,7 @@
  * This is an ARCnet frame header, as seen by the kernel (and userspace,
  * when you do a raw packet capture).
  */
-struct archdr
-{
+struct archdr {
     /* hardware requirements */
     struct arc_hardware hard;
      
diff --git a/include/linux/if_arp.h b/include/linux/if_arp.h
index 282eb37..e80b7f8 100644
--- a/include/linux/if_arp.h
+++ b/include/linux/if_arp.h
@@ -133,8 +133,7 @@
  *	This structure defines an ethernet arp header.
  */
 
-struct arphdr
-{
+struct arphdr {
 	__be16		ar_hrd;		/* format of hardware address	*/
 	__be16		ar_pro;		/* format of protocol address	*/
 	unsigned char	ar_hln;		/* length of hardware address	*/
diff --git a/include/linux/if_bonding.h b/include/linux/if_bonding.h
index 65c2d24..cd525fa 100644
--- a/include/linux/if_bonding.h
+++ b/include/linux/if_bonding.h
@@ -94,8 +94,7 @@
 	__s32 miimon;
 } ifbond;
 
-typedef struct ifslave
-{
+typedef struct ifslave {
 	__s32 slave_id; /* Used as an IN param to the BOND_SLAVE_INFO_QUERY ioctl */
 	char slave_name[IFNAMSIZ];
 	__s8 link;
diff --git a/include/linux/if_bridge.h b/include/linux/if_bridge.h
index 6badb3e..938b7e8 100644
--- a/include/linux/if_bridge.h
+++ b/include/linux/if_bridge.h
@@ -49,8 +49,7 @@
 #define BR_STATE_FORWARDING 3
 #define BR_STATE_BLOCKING 4
 
-struct __bridge_info
-{
+struct __bridge_info {
 	__u64 designated_root;
 	__u64 bridge_id;
 	__u32 root_path_cost;
@@ -72,8 +71,7 @@
 	__u32 gc_timer_value;
 };
 
-struct __port_info
-{
+struct __port_info {
 	__u64 designated_root;
 	__u64 designated_bridge;
 	__u16 port_id;
@@ -89,8 +87,7 @@
 	__u32 hold_timer_value;
 };
 
-struct __fdb_entry
-{
+struct __fdb_entry {
 	__u8 mac_addr[6];
 	__u8 port_no;
 	__u8 is_local;
diff --git a/include/linux/if_ec.h b/include/linux/if_ec.h
index e7499aa..d85f9f4 100644
--- a/include/linux/if_ec.h
+++ b/include/linux/if_ec.h
@@ -5,14 +5,12 @@
 
 /* User visible stuff. Glibc provides its own but libc5 folk will use these */
 
-struct ec_addr
-{
+struct ec_addr {
   unsigned char station;		/* Station number.  */
   unsigned char net;			/* Network number.  */
 };
 
-struct sockaddr_ec
-{
+struct sockaddr_ec {
   unsigned short sec_family;
   unsigned char port;			/* Port number.  */
   unsigned char cb;			/* Control/flag byte.  */
@@ -37,8 +35,7 @@
 #define EC_HLEN				6
 
 /* This is what an Econet frame looks like on the wire. */
-struct ec_framehdr 
-{
+struct ec_framehdr {
   unsigned char dst_stn;
   unsigned char dst_net;
   unsigned char src_stn;
@@ -62,8 +59,7 @@
 	return (struct econet_sock *)sk;
 }
 
-struct ec_device
-{
+struct ec_device {
   unsigned char station, net;		/* Econet protocol address */
 };
 
diff --git a/include/linux/if_fddi.h b/include/linux/if_fddi.h
index 45de104..5459c5c 100644
--- a/include/linux/if_fddi.h
+++ b/include/linux/if_fddi.h
@@ -63,36 +63,32 @@
 #define FDDI_UI_CMD			0x03
 
 /* Define 802.2 Type 1 header */
-struct fddi_8022_1_hdr
-	{
+struct fddi_8022_1_hdr {
 	__u8	dsap;					/* destination service access point */
 	__u8	ssap;					/* source service access point */
 	__u8	ctrl;					/* control byte #1 */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define 802.2 Type 2 header */
-struct fddi_8022_2_hdr
-	{
+struct fddi_8022_2_hdr {
 	__u8	dsap;					/* destination service access point */
 	__u8	ssap;					/* source service access point */
 	__u8	ctrl_1;					/* control byte #1 */
 	__u8	ctrl_2;					/* control byte #2 */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define 802.2 SNAP header */
 #define FDDI_K_OUI_LEN	3
-struct fddi_snap_hdr
-	{
+struct fddi_snap_hdr {
 	__u8	dsap;					/* always 0xAA */
 	__u8	ssap;					/* always 0xAA */
 	__u8	ctrl;					/* always 0x03 */
 	__u8	oui[FDDI_K_OUI_LEN];	/* organizational universal id */
 	__be16	ethertype;				/* packet type ID field */
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 /* Define FDDI LLC frame header */
-struct fddihdr
-	{
+struct fddihdr {
 	__u8	fc;						/* frame control */
 	__u8	daddr[FDDI_K_ALEN];		/* destination address */
 	__u8	saddr[FDDI_K_ALEN];		/* source address */
@@ -102,7 +98,7 @@
 		struct fddi_8022_2_hdr		llc_8022_2;
 		struct fddi_snap_hdr		llc_snap;
 		} hdr;
-	} __attribute__ ((packed));
+} __attribute__ ((packed));
 
 #ifdef __KERNEL__
 #include <linux/netdevice.h>
@@ -197,7 +193,7 @@
 	__u32	port_pc_withhold[2];
 	__u32	port_ler_flag[2];
 	__u32	port_hardware_present[2];
-	};
+};
 #endif /* __KERNEL__ */
 
 #endif	/* _LINUX_IF_FDDI_H */
diff --git a/include/linux/if_hippi.h b/include/linux/if_hippi.h
index 4a7c994..8d038eb 100644
--- a/include/linux/if_hippi.h
+++ b/include/linux/if_hippi.h
@@ -51,8 +51,7 @@
  *	HIPPI statistics collection data. 
  */
  
-struct hipnet_statistics
-{
+struct hipnet_statistics {
 	int	rx_packets;		/* total packets received	*/
 	int	tx_packets;		/* total packets transmitted	*/
 	int	rx_errors;		/* bad packets received		*/
@@ -77,8 +76,7 @@
 };
 
 
-struct hippi_fp_hdr
-{
+struct hippi_fp_hdr {
 #if 0
 	__u8		ulp;				/* must contain 4 */
 #if defined (__BIG_ENDIAN_BITFIELD)
@@ -108,8 +106,7 @@
 	__be32		d2_size;
 } __attribute__ ((packed));
 
-struct hippi_le_hdr
-{
+struct hippi_le_hdr {
 #if defined (__BIG_ENDIAN_BITFIELD)
 	__u8		fc:3;
 	__u8		double_wide:1;
@@ -139,8 +136,7 @@
  * Looks like the dsap and ssap fields have been swapped by mistake in
  * RFC 2067 "IP over HIPPI".
  */
-struct hippi_snap_hdr
-{
+struct hippi_snap_hdr {
 	__u8	dsap;			/* always 0xAA */
 	__u8	ssap;			/* always 0xAA */
 	__u8	ctrl;			/* always 0x03 */
@@ -148,8 +144,7 @@
 	__be16	ethertype;		/* packet type ID field */
 } __attribute__ ((packed));
 
-struct hippi_hdr
-{
+struct hippi_hdr {
 	struct hippi_fp_hdr	fp;
 	struct hippi_le_hdr	le;
 	struct hippi_snap_hdr	snap;
diff --git a/include/linux/if_link.h b/include/linux/if_link.h
index 176c518..1d3b242 100644
--- a/include/linux/if_link.h
+++ b/include/linux/if_link.h
@@ -5,8 +5,7 @@
 #include <linux/netlink.h>
 
 /* The struct should be in sync with struct net_device_stats */
-struct rtnl_link_stats
-{
+struct rtnl_link_stats {
 	__u32	rx_packets;		/* total packets received	*/
 	__u32	tx_packets;		/* total packets transmitted	*/
 	__u32	rx_bytes;		/* total bytes received 	*/
@@ -39,8 +38,7 @@
 };
 
 /* The struct should be in sync with struct ifmap */
-struct rtnl_link_ifmap
-{
+struct rtnl_link_ifmap {
 	__u64	mem_start;
 	__u64	mem_end;
 	__u64	base_addr;
@@ -49,8 +47,7 @@
 	__u8	port;
 };
 
-enum
-{
+enum {
 	IFLA_UNSPEC,
 	IFLA_ADDRESS,
 	IFLA_BROADCAST,
@@ -123,8 +120,7 @@
  */
 
 /* Subtype attributes for IFLA_PROTINFO */
-enum
-{
+enum {
 	IFLA_INET6_UNSPEC,
 	IFLA_INET6_FLAGS,	/* link flags			*/
 	IFLA_INET6_CONF,	/* sysctl parameters		*/
@@ -137,16 +133,14 @@
 
 #define IFLA_INET6_MAX	(__IFLA_INET6_MAX - 1)
 
-struct ifla_cacheinfo
-{
+struct ifla_cacheinfo {
 	__u32	max_reasm_len;
 	__u32	tstamp;		/* ipv6InterfaceTable updated timestamp */
 	__u32	reachable_time;
 	__u32	retrans_time;
 };
 
-enum
-{
+enum {
 	IFLA_INFO_UNSPEC,
 	IFLA_INFO_KIND,
 	IFLA_INFO_DATA,
@@ -158,8 +152,7 @@
 
 /* VLAN section */
 
-enum
-{
+enum {
 	IFLA_VLAN_UNSPEC,
 	IFLA_VLAN_ID,
 	IFLA_VLAN_FLAGS,
@@ -175,8 +168,7 @@
 	__u32	mask;
 };
 
-enum
-{
+enum {
 	IFLA_VLAN_QOS_UNSPEC,
 	IFLA_VLAN_QOS_MAPPING,
 	__IFLA_VLAN_QOS_MAX
@@ -184,8 +176,7 @@
 
 #define IFLA_VLAN_QOS_MAX	(__IFLA_VLAN_QOS_MAX - 1)
 
-struct ifla_vlan_qos_mapping
-{
+struct ifla_vlan_qos_mapping {
 	__u32 from;
 	__u32 to;
 };
diff --git a/include/linux/if_packet.h b/include/linux/if_packet.h
index dea7d6b..4021d47c 100644
--- a/include/linux/if_packet.h
+++ b/include/linux/if_packet.h
@@ -3,15 +3,13 @@
 
 #include <linux/types.h>
 
-struct sockaddr_pkt
-{
+struct sockaddr_pkt {
 	unsigned short spkt_family;
 	unsigned char spkt_device[14];
 	__be16 spkt_protocol;
 };
 
-struct sockaddr_ll
-{
+struct sockaddr_ll {
 	unsigned short	sll_family;
 	__be16		sll_protocol;
 	int		sll_ifindex;
@@ -49,14 +47,12 @@
 #define PACKET_TX_RING			13
 #define PACKET_LOSS			14
 
-struct tpacket_stats
-{
+struct tpacket_stats {
 	unsigned int	tp_packets;
 	unsigned int	tp_drops;
 };
 
-struct tpacket_auxdata
-{
+struct tpacket_auxdata {
 	__u32		tp_status;
 	__u32		tp_len;
 	__u32		tp_snaplen;
@@ -78,8 +74,7 @@
 #define TP_STATUS_SENDING	0x2
 #define TP_STATUS_WRONG_FORMAT	0x4
 
-struct tpacket_hdr
-{
+struct tpacket_hdr {
 	unsigned long	tp_status;
 	unsigned int	tp_len;
 	unsigned int	tp_snaplen;
@@ -93,8 +88,7 @@
 #define TPACKET_ALIGN(x)	(((x)+TPACKET_ALIGNMENT-1)&~(TPACKET_ALIGNMENT-1))
 #define TPACKET_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket_hdr)) + sizeof(struct sockaddr_ll))
 
-struct tpacket2_hdr
-{
+struct tpacket2_hdr {
 	__u32		tp_status;
 	__u32		tp_len;
 	__u32		tp_snaplen;
@@ -107,8 +101,7 @@
 
 #define TPACKET2_HDRLEN		(TPACKET_ALIGN(sizeof(struct tpacket2_hdr)) + sizeof(struct sockaddr_ll))
 
-enum tpacket_versions
-{
+enum tpacket_versions {
 	TPACKET_V1,
 	TPACKET_V2,
 };
@@ -126,16 +119,14 @@
    - Pad to align to TPACKET_ALIGNMENT=16
  */
 
-struct tpacket_req
-{
+struct tpacket_req {
 	unsigned int	tp_block_size;	/* Minimal size of contiguous block */
 	unsigned int	tp_block_nr;	/* Number of blocks */
 	unsigned int	tp_frame_size;	/* Size of frame */
 	unsigned int	tp_frame_nr;	/* Total number of frames */
 };
 
-struct packet_mreq
-{
+struct packet_mreq {
 	int		mr_ifindex;
 	unsigned short	mr_type;
 	unsigned short	mr_alen;
diff --git a/include/linux/if_plip.h b/include/linux/if_plip.h
index 153a649..6298c7e 100644
--- a/include/linux/if_plip.h
+++ b/include/linux/if_plip.h
@@ -15,8 +15,7 @@
 
 #define	SIOCDEVPLIP	SIOCDEVPRIVATE
 
-struct plipconf
-{
+struct plipconf {
 	unsigned short pcmd;
 	unsigned long  nibble;
 	unsigned long  trigger;
diff --git a/include/linux/if_pppol2tp.h b/include/linux/if_pppol2tp.h
index 3a14b08..c58baea 100644
--- a/include/linux/if_pppol2tp.h
+++ b/include/linux/if_pppol2tp.h
@@ -24,8 +24,7 @@
 /* Structure used to connect() the socket to a particular tunnel UDP
  * socket.
  */
-struct pppol2tp_addr
-{
+struct pppol2tp_addr {
 	__kernel_pid_t	pid;		/* pid that owns the fd.
 					 * 0 => current */
 	int	fd;			/* FD of UDP socket to use */
diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h
index 5a9aae4..1822d63 100644
--- a/include/linux/if_tunnel.h
+++ b/include/linux/if_tunnel.h
@@ -5,6 +5,7 @@
 
 #ifdef __KERNEL__
 #include <linux/ip.h>
+#include <linux/in6.h>
 #endif
 
 #define SIOCGETTUNNEL   (SIOCDEVPRIVATE + 0)
@@ -15,6 +16,10 @@
 #define SIOCADDPRL      (SIOCDEVPRIVATE + 5)
 #define SIOCDELPRL      (SIOCDEVPRIVATE + 6)
 #define SIOCCHGPRL      (SIOCDEVPRIVATE + 7)
+#define SIOCGET6RD      (SIOCDEVPRIVATE + 8)
+#define SIOCADD6RD      (SIOCDEVPRIVATE + 9)
+#define SIOCDEL6RD      (SIOCDEVPRIVATE + 10)
+#define SIOCCHG6RD      (SIOCDEVPRIVATE + 11)
 
 #define GRE_CSUM	__cpu_to_be16(0x8000)
 #define GRE_ROUTING	__cpu_to_be16(0x4000)
@@ -25,8 +30,7 @@
 #define GRE_FLAGS	__cpu_to_be16(0x00F8)
 #define GRE_VERSION	__cpu_to_be16(0x0007)
 
-struct ip_tunnel_parm
-{
+struct ip_tunnel_parm {
 	char			name[IFNAMSIZ];
 	int			link;
 	__be16			i_flags;
@@ -51,8 +55,14 @@
 /* PRL flags */
 #define	PRL_DEFAULT		0x0001
 
-enum
-{
+struct ip_tunnel_6rd {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	__u16			prefixlen;
+	__u16			relay_prefixlen;
+};
+
+enum {
 	IFLA_GRE_UNSPEC,
 	IFLA_GRE_LINK,
 	IFLA_GRE_IFLAGS,
diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h
index 7ff9af1..153f6b9 100644
--- a/include/linux/if_vlan.h
+++ b/include/linux/if_vlan.h
@@ -63,7 +63,11 @@
 	return (struct vlan_ethhdr *)skb_mac_header(skb);
 }
 
-#define VLAN_VID_MASK	0xfff
+#define VLAN_PRIO_MASK		0xe000 /* Priority Code Point */
+#define VLAN_PRIO_SHIFT		13
+#define VLAN_CFI_MASK		0x1000 /* Canonical Format Indicator */
+#define VLAN_TAG_PRESENT	VLAN_CFI_MASK
+#define VLAN_VID_MASK		0x0fff /* VLAN Identifier */
 
 /* found in socket.c */
 extern void vlan_ioctl_set(int (*hook)(struct net *, void __user *));
@@ -81,6 +85,7 @@
 					    * the vlan is attached to.
 					    */
 	unsigned int		nr_vlans;
+	int			killall;
 	struct hlist_node	hlist;	/* linked list */
 	struct net_device **vlan_devices_arrays[VLAN_GROUP_ARRAY_SPLIT_PARTS];
 	struct rcu_head		rcu;
@@ -105,8 +110,8 @@
 	array[vlan_id % VLAN_GROUP_ARRAY_PART_LEN] = dev;
 }
 
-#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci)
-#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci)
+#define vlan_tx_tag_present(__skb)	((__skb)->vlan_tci & VLAN_TAG_PRESENT)
+#define vlan_tx_tag_get(__skb)		((__skb)->vlan_tci & ~VLAN_TAG_PRESENT)
 
 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
 extern struct net_device *vlan_dev_real_dev(const struct net_device *dev);
@@ -115,10 +120,12 @@
 extern int __vlan_hwaccel_rx(struct sk_buff *skb, struct vlan_group *grp,
 			     u16 vlan_tci, int polling);
 extern int vlan_hwaccel_do_receive(struct sk_buff *skb);
-extern int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
-			    unsigned int vlan_tci, struct sk_buff *skb);
-extern int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-			  unsigned int vlan_tci);
+extern gro_result_t
+vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+		 unsigned int vlan_tci, struct sk_buff *skb);
+extern gro_result_t
+vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+	       unsigned int vlan_tci);
 
 #else
 static inline struct net_device *vlan_dev_real_dev(const struct net_device *dev)
@@ -145,17 +152,18 @@
 	return 0;
 }
 
-static inline int vlan_gro_receive(struct napi_struct *napi,
-				   struct vlan_group *grp,
-				   unsigned int vlan_tci, struct sk_buff *skb)
+static inline gro_result_t
+vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+		 unsigned int vlan_tci, struct sk_buff *skb)
 {
-	return NET_RX_DROP;
+	return GRO_DROP;
 }
 
-static inline int vlan_gro_frags(struct napi_struct *napi,
-				 struct vlan_group *grp, unsigned int vlan_tci)
+static inline gro_result_t
+vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+	       unsigned int vlan_tci)
 {
-	return NET_RX_DROP;
+	return GRO_DROP;
 }
 #endif
 
@@ -231,7 +239,7 @@
 static inline struct sk_buff *__vlan_hwaccel_put_tag(struct sk_buff *skb,
 						     u16 vlan_tci)
 {
-	skb->vlan_tci = vlan_tci;
+	skb->vlan_tci = VLAN_TAG_PRESENT | vlan_tci;
 	return skb;
 }
 
@@ -284,7 +292,7 @@
 					 u16 *vlan_tci)
 {
 	if (vlan_tx_tag_present(skb)) {
-		*vlan_tci = skb->vlan_tci;
+		*vlan_tci = vlan_tx_tag_get(skb);
 		return 0;
 	} else {
 		*vlan_tci = 0;
diff --git a/include/linux/igmp.h b/include/linux/igmp.h
index fe158e0..724c27e 100644
--- a/include/linux/igmp.h
+++ b/include/linux/igmp.h
@@ -27,8 +27,7 @@
  *	Header in on cable format
  */
 
-struct igmphdr
-{
+struct igmphdr {
 	__u8 type;
 	__u8 code;		/* For newer IGMP */
 	__sum16 csum;
@@ -151,8 +150,7 @@
 extern int sysctl_igmp_max_memberships;
 extern int sysctl_igmp_max_msf;
 
-struct ip_sf_socklist
-{
+struct ip_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
 	__be32			sl_addr[0];
@@ -167,16 +165,14 @@
    this list never used in fast path code
  */
 
-struct ip_mc_socklist
-{
+struct ip_mc_socklist {
 	struct ip_mc_socklist	*next;
 	struct ip_mreqn		multi;
 	unsigned int		sfmode;		/* MCAST_{INCLUDE,EXCLUDE} */
 	struct ip_sf_socklist	*sflist;
 };
 
-struct ip_sf_list
-{
+struct ip_sf_list {
 	struct ip_sf_list	*sf_next;
 	__be32			sf_inaddr;
 	unsigned long		sf_count[2];	/* include/exclude counts */
@@ -185,8 +181,7 @@
 	unsigned char		sf_crcount;	/* retrans. left to send */
 };
 
-struct ip_mc_list
-{
+struct ip_mc_list {
 	struct in_device	*interface;
 	__be32			multiaddr;
 	struct ip_sf_list	*sources;
diff --git a/include/linux/in.h b/include/linux/in.h
index cf196da..b615649 100644
--- a/include/linux/in.h
+++ b/include/linux/in.h
@@ -118,14 +118,12 @@
 
 /* Request struct for multicast socket ops */
 
-struct ip_mreq 
-{
+struct ip_mreq  {
 	struct in_addr imr_multiaddr;	/* IP multicast address of group */
 	struct in_addr imr_interface;	/* local IP address of interface */
 };
 
-struct ip_mreqn
-{
+struct ip_mreqn {
 	struct in_addr	imr_multiaddr;		/* IP multicast address of group */
 	struct in_addr	imr_address;		/* local IP address of interface */
 	int		imr_ifindex;		/* Interface index */
@@ -149,21 +147,18 @@
 	(sizeof(struct ip_msfilter) - sizeof(__u32) \
 	+ (numsrc) * sizeof(__u32))
 
-struct group_req
-{
+struct group_req {
 	__u32				 gr_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gr_group;	/* group address */
 };
 
-struct group_source_req
-{
+struct group_source_req {
 	__u32				 gsr_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gsr_group;	/* group address */
 	struct __kernel_sockaddr_storage gsr_source;	/* source address */
 };
 
-struct group_filter
-{
+struct group_filter {
 	__u32				 gf_interface;	/* interface index */
 	struct __kernel_sockaddr_storage gf_group;	/* multicast address */
 	__u32				 gf_fmode;	/* filter mode */
@@ -175,8 +170,7 @@
 	(sizeof(struct group_filter) - sizeof(struct __kernel_sockaddr_storage) \
 	+ (numsrc) * sizeof(struct __kernel_sockaddr_storage))
 
-struct in_pktinfo
-{
+struct in_pktinfo {
 	int		ipi_ifindex;
 	struct in_addr	ipi_spec_dst;
 	struct in_addr	ipi_addr;
diff --git a/include/linux/in6.h b/include/linux/in6.h
index 718bf21..dfa2916 100644
--- a/include/linux/in6.h
+++ b/include/linux/in6.h
@@ -27,10 +27,8 @@
  *	IPv6 address structure
  */
 
-struct in6_addr
-{
-	union 
-	{
+struct in6_addr {
+	union {
 		__u8		u6_addr8[16];
 		__be16		u6_addr16[8];
 		__be32		u6_addr32[4];
@@ -75,8 +73,7 @@
 
 #define ipv6mr_acaddr	ipv6mr_multiaddr
 
-struct in6_flowlabel_req
-{
+struct in6_flowlabel_req {
 	struct in6_addr	flr_dst;
 	__be32	flr_label;
 	__u8	flr_action;
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index ad27c7d..eecfa55 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -10,15 +10,13 @@
 #include <linux/timer.h>
 #include <linux/sysctl.h>
 
-struct ipv4_devconf
-{
+struct ipv4_devconf {
 	void	*sysctl;
 	int	data[__NET_IPV4_CONF_MAX - 1];
 	DECLARE_BITMAP(state, __NET_IPV4_CONF_MAX - 1);
 };
 
-struct in_device
-{
+struct in_device {
 	struct net_device	*dev;
 	atomic_t		refcnt;
 	int			dead;
@@ -110,8 +108,7 @@
 #define IN_DEV_ARP_IGNORE(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_IGNORE)
 #define IN_DEV_ARP_NOTIFY(in_dev)	IN_DEV_MAXCONF((in_dev), ARP_NOTIFY)
 
-struct in_ifaddr
-{
+struct in_ifaddr {
 	struct in_ifaddr	*ifa_next;
 	struct in_device	*ifa_dev;
 	struct rcu_head		rcu_head;
diff --git a/include/linux/ip_vs.h b/include/linux/ip_vs.h
index 148265e..dfc1703 100644
--- a/include/linux/ip_vs.h
+++ b/include/linux/ip_vs.h
@@ -127,8 +127,7 @@
 /*
  *	IPVS statistics object (for user space)
  */
-struct ip_vs_stats_user
-{
+struct ip_vs_stats_user {
 	__u32                   conns;          /* connections scheduled */
 	__u32                   inpkts;         /* incoming packets */
 	__u32                   outpkts;        /* outgoing packets */
diff --git a/include/linux/ipc.h b/include/linux/ipc.h
index b882610..3b1594d 100644
--- a/include/linux/ipc.h
+++ b/include/linux/ipc.h
@@ -78,8 +78,6 @@
 #define IPCCALL(version,op)	((version)<<16 | (op))
 
 #ifdef __KERNEL__
-
-#include <linux/kref.h>
 #include <linux/spinlock.h>
 
 #define IPCMNI 32768  /* <= MAX_INT limit for ipc arrays (including sysctl changes) */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index c662efa..e0cc9a7 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -167,6 +167,7 @@
 #endif
 	__s32		disable_ipv6;
 	__s32		accept_dad;
+	__s32		force_tllao;
 	void		*sysctl;
 };
 
@@ -207,6 +208,7 @@
 	DEVCONF_MC_FORWARDING,
 	DEVCONF_DISABLE_IPV6,
 	DEVCONF_ACCEPT_DAD,
+	DEVCONF_FORCE_TLLAO,
 	DEVCONF_MAX
 };
 
@@ -503,7 +505,7 @@
 
 #define INET6_MATCH(__sk, __net, __hash, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && sock_net((__sk)) == (__net)	&& \
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))  	&& \
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports)) && \
 	 ((__sk)->sk_family		== AF_INET6)		&& \
 	 ipv6_addr_equal(&inet6_sk(__sk)->daddr, (__saddr))	&& \
 	 ipv6_addr_equal(&inet6_sk(__sk)->rcv_saddr, (__daddr))	&& \
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 52695d3..f1011f7 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -464,9 +464,9 @@
  */
 struct transaction_chp_stats_s {
 	unsigned long		cs_chp_time;
-	unsigned long		cs_forced_to_close;
-	unsigned long		cs_written;
-	unsigned long		cs_dropped;
+	__u32			cs_forced_to_close;
+	__u32			cs_written;
+	__u32			cs_dropped;
 };
 
 /* The transaction_t type is the guts of the journaling mechanism.  It
@@ -668,23 +668,16 @@
 	unsigned long		rs_flushing;
 	unsigned long		rs_logging;
 
-	unsigned long		rs_handle_count;
-	unsigned long		rs_blocks;
-	unsigned long		rs_blocks_logged;
+	__u32			rs_handle_count;
+	__u32			rs_blocks;
+	__u32			rs_blocks_logged;
 };
 
 struct transaction_stats_s {
-	int 			ts_type;
 	unsigned long		ts_tid;
-	union {
-		struct transaction_run_stats_s run;
-		struct transaction_chp_stats_s chp;
-	} u;
+	struct transaction_run_stats_s run;
 };
 
-#define JBD2_STATS_RUN		1
-#define JBD2_STATS_CHECKPOINT	2
-
 static inline unsigned long
 jbd2_time_diff(unsigned long start, unsigned long end)
 {
@@ -988,12 +981,6 @@
 	/*
 	 * Journal statistics
 	 */
-	struct transaction_stats_s *j_history;
-	int			j_history_max;
-	int			j_history_cur;
-	/*
-	 * Protect the transactions statistics history
-	 */
 	spinlock_t		j_history_lock;
 	struct proc_dir_entry	*j_proc_entry;
 	struct transaction_stats_s j_stats;
diff --git a/include/linux/kref.h b/include/linux/kref.h
index 0cef6ba..b0cb0eb 100644
--- a/include/linux/kref.h
+++ b/include/linux/kref.h
@@ -16,7 +16,6 @@
 #define _KREF_H_
 
 #include <linux/types.h>
-#include <asm/atomic.h>
 
 struct kref {
 	atomic_t refcount;
diff --git a/include/linux/mfd/wm831x/status.h b/include/linux/mfd/wm831x/status.h
new file mode 100644
index 0000000..6bc090d
--- /dev/null
+++ b/include/linux/mfd/wm831x/status.h
@@ -0,0 +1,34 @@
+/*
+ * include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __MFD_WM831X_STATUS_H__
+#define __MFD_WM831X_STATUS_H__
+
+#define WM831X_LED_SRC_MASK                    0xC000  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_SHIFT                       14  /* LED_SRC - [15:14] */
+#define WM831X_LED_SRC_WIDTH                        2  /* LED_SRC - [15:14] */
+#define WM831X_LED_MODE_MASK                   0x0300  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_SHIFT                       8  /* LED_MODE - [9:8] */
+#define WM831X_LED_MODE_WIDTH                       2  /* LED_MODE - [9:8] */
+#define WM831X_LED_SEQ_LEN_MASK                0x0030  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_SHIFT                    4  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_SEQ_LEN_WIDTH                    2  /* LED_SEQ_LEN - [5:4] */
+#define WM831X_LED_DUR_MASK                    0x000C  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_SHIFT                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUR_WIDTH                        2  /* LED_DUR - [3:2] */
+#define WM831X_LED_DUTY_CYC_MASK               0x0003  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_SHIFT                   0  /* LED_DUTY_CYC - [1:0] */
+#define WM831X_LED_DUTY_CYC_WIDTH                   2  /* LED_DUTY_CYC - [1:0] */
+
+#endif
diff --git a/include/linux/mm.h b/include/linux/mm.h
index df08551..24c3956 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -288,7 +288,7 @@
 #ifdef CONFIG_MMU
 extern int is_vmalloc_or_module_addr(const void *x);
 #else
-static int is_vmalloc_or_module_addr(const void *x)
+static inline int is_vmalloc_or_module_addr(const void *x)
 {
 	return 0;
 }
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index 21d6aa4..84a524a 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -171,7 +171,7 @@
 	struct anon_vma *anon_vma;	/* Serialized by page_table_lock */
 
 	/* Function pointers to deal with this struct. */
-	struct vm_operations_struct * vm_ops;
+	const struct vm_operations_struct *vm_ops;
 
 	/* Information about our backing store: */
 	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
diff --git a/include/linux/mroute.h b/include/linux/mroute.h
index 08bc776..c5f3d53 100644
--- a/include/linux/mroute.h
+++ b/include/linux/mroute.h
@@ -59,20 +59,24 @@
 	unsigned char vifc_flags;	/* VIFF_ flags */
 	unsigned char vifc_threshold;	/* ttl limit */
 	unsigned int vifc_rate_limit;	/* Rate limiter values (NI) */
-	struct in_addr vifc_lcl_addr;	/* Our address */
+	union {
+		struct in_addr vifc_lcl_addr;     /* Local interface address */
+		int            vifc_lcl_ifindex;  /* Local interface index   */
+	};
 	struct in_addr vifc_rmt_addr;	/* IPIP tunnel addr */
 };
 
-#define VIFF_TUNNEL	0x1	/* IPIP tunnel */
-#define VIFF_SRCRT	0x2	/* NI */
-#define VIFF_REGISTER	0x4	/* register vif	*/
+#define VIFF_TUNNEL		0x1	/* IPIP tunnel */
+#define VIFF_SRCRT		0x2	/* NI */
+#define VIFF_REGISTER		0x4	/* register vif	*/
+#define VIFF_USE_IFINDEX	0x8	/* use vifc_lcl_ifindex instead of
+					   vifc_lcl_addr to find an interface */
 
 /*
  *	Cache manipulation structures for mrouted and PIMd
  */
  
-struct mfcctl
-{
+struct mfcctl {
 	struct in_addr mfcc_origin;		/* Origin of mcast	*/
 	struct in_addr mfcc_mcastgrp;		/* Group in question	*/
 	vifi_t	mfcc_parent;			/* Where it arrived	*/
@@ -87,8 +91,7 @@
  *	Group count retrieval for mrouted
  */
  
-struct sioc_sg_req
-{
+struct sioc_sg_req {
 	struct in_addr src;
 	struct in_addr grp;
 	unsigned long pktcnt;
@@ -100,8 +103,7 @@
  *	To get vif packet counts
  */
 
-struct sioc_vif_req
-{
+struct sioc_vif_req {
 	vifi_t	vifi;		/* Which iface */
 	unsigned long icount;	/* In packets */
 	unsigned long ocount;	/* Out packets */
@@ -114,8 +116,7 @@
  *	data. Magically happens to be like an IP packet as per the original
  */
  
-struct igmpmsg
-{
+struct igmpmsg {
 	__u32 unused1,unused2;
 	unsigned char im_msgtype;		/* What is this */
 	unsigned char im_mbz;			/* Must be zero */
@@ -176,8 +177,7 @@
 }
 #endif
 
-struct vif_device
-{
+struct vif_device {
 	struct net_device 	*dev;			/* Device we are using */
 	unsigned long	bytes_in,bytes_out;
 	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
@@ -190,8 +190,7 @@
 
 #define VIFF_STATIC 0x8000
 
-struct mfc_cache 
-{
+struct mfc_cache {
 	struct mfc_cache *next;			/* Next entry on cache line 	*/
 #ifdef CONFIG_NET_NS
 	struct net *mfc_net;
diff --git a/include/linux/mroute6.h b/include/linux/mroute6.h
index b191865..2caa1a8 100644
--- a/include/linux/mroute6.h
+++ b/include/linux/mroute6.h
@@ -75,8 +75,7 @@
  *	Cache manipulation structures for mrouted and PIMd
  */
 
-struct mf6cctl
-{
+struct mf6cctl {
 	struct sockaddr_in6 mf6cc_origin;		/* Origin of mcast	*/
 	struct sockaddr_in6 mf6cc_mcastgrp;		/* Group in question	*/
 	mifi_t	mf6cc_parent;			/* Where it arrived	*/
@@ -87,8 +86,7 @@
  *	Group count retrieval for pim6sd
  */
 
-struct sioc_sg_req6
-{
+struct sioc_sg_req6 {
 	struct sockaddr_in6 src;
 	struct sockaddr_in6 grp;
 	unsigned long pktcnt;
@@ -100,8 +98,7 @@
  *	To get vif packet counts
  */
 
-struct sioc_mif_req6
-{
+struct sioc_mif_req6 {
 	mifi_t	mifi;		/* Which iface */
 	unsigned long icount;	/* In packets */
 	unsigned long ocount;	/* Out packets */
@@ -172,8 +169,7 @@
 }
 #endif
 
-struct mif_device
-{
+struct mif_device {
 	struct net_device 	*dev;			/* Device we are using */
 	unsigned long	bytes_in,bytes_out;
 	unsigned long	pkt_in,pkt_out;		/* Statistics 			*/
@@ -185,8 +181,7 @@
 
 #define VIFF_STATIC 0x8000
 
-struct mfc6_cache
-{
+struct mfc6_cache {
 	struct mfc6_cache *next;		/* Next entry on cache line 	*/
 #ifdef CONFIG_NET_NS
 	struct net *mfc6_net;
diff --git a/include/linux/neighbour.h b/include/linux/neighbour.h
index 12c9de1..a7003b7 100644
--- a/include/linux/neighbour.h
+++ b/include/linux/neighbour.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/netlink.h>
 
-struct ndmsg
-{
+struct ndmsg {
 	__u8		ndm_family;
 	__u8		ndm_pad1;
 	__u16		ndm_pad2;
@@ -15,8 +14,7 @@
 	__u8		ndm_type;
 };
 
-enum
-{
+enum {
 	NDA_UNSPEC,
 	NDA_DST,
 	NDA_LLADDR,
@@ -56,8 +54,7 @@
    NUD_PERMANENT is also cannot be deleted by garbage collectors.
  */
 
-struct nda_cacheinfo
-{
+struct nda_cacheinfo {
 	__u32		ndm_confirmed;
 	__u32		ndm_used;
 	__u32		ndm_updated;
@@ -89,8 +86,7 @@
  * device.
  ****/
 
-struct ndt_stats
-{
+struct ndt_stats {
 	__u64		ndts_allocs;
 	__u64		ndts_destroys;
 	__u64		ndts_hash_grows;
@@ -124,15 +120,13 @@
 };
 #define NDTPA_MAX (__NDTPA_MAX - 1)
 
-struct ndtmsg
-{
+struct ndtmsg {
 	__u8		ndtm_family;
 	__u8		ndtm_pad1;
 	__u16		ndtm_pad2;
 };
 
-struct ndt_config
-{
+struct ndt_config {
 	__u16		ndtc_key_len;
 	__u16		ndtc_entry_size;
 	__u32		ndtc_entries;
diff --git a/include/linux/net.h b/include/linux/net.h
index 529a093..70ee3c3 100644
--- a/include/linux/net.h
+++ b/include/linux/net.h
@@ -41,6 +41,7 @@
 #define SYS_SENDMSG	16		/* sys_sendmsg(2)		*/
 #define SYS_RECVMSG	17		/* sys_recvmsg(2)		*/
 #define SYS_ACCEPT4	18		/* sys_accept4(2)		*/
+#define SYS_RECVMMSG	19		/* sys_recvmmsg(2)		*/
 
 typedef enum {
 	SS_FREE = 0,			/* not allocated		*/
@@ -198,9 +199,13 @@
 				       struct pipe_inode_info *pipe, size_t len, unsigned int flags);
 };
 
+#define DECLARE_SOCKADDR(type, dst, src)	\
+	type dst = ({ __sockaddr_check_size(sizeof(*dst)); (type) src; })
+
 struct net_proto_family {
 	int		family;
-	int		(*create)(struct net *net, struct socket *sock, int protocol);
+	int		(*create)(struct net *net, struct socket *sock,
+				  int protocol, int kern);
 	struct module	*owner;
 };
 
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 812a5f3..465add6 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -125,8 +125,7 @@
  *	with byte counters.
  */
 
-struct net_device_stats
-{
+struct net_device_stats {
 	unsigned long	rx_packets;		/* total packets received	*/
 	unsigned long	tx_packets;		/* total packets transmitted	*/
 	unsigned long	rx_bytes;		/* total bytes received 	*/
@@ -179,8 +178,7 @@
 struct neigh_parms;
 struct sk_buff;
 
-struct netif_rx_stats
-{
+struct netif_rx_stats {
 	unsigned total;
 	unsigned dropped;
 	unsigned time_squeeze;
@@ -189,8 +187,7 @@
 
 DECLARE_PER_CPU(struct netif_rx_stats, netdev_rx_stat);
 
-struct dev_addr_list
-{
+struct dev_addr_list {
 	struct dev_addr_list	*next;
 	u8			da_addr[MAX_ADDR_LEN];
 	u8			da_addrlen;
@@ -227,8 +224,7 @@
 	int			count;
 };
 
-struct hh_cache
-{
+struct hh_cache {
 	struct hh_cache *hh_next;	/* Next entry			     */
 	atomic_t	hh_refcnt;	/* number of users                   */
 /*
@@ -291,8 +287,7 @@
  * code.
  */
 
-enum netdev_state_t
-{
+enum netdev_state_t {
 	__LINK_STATE_START,
 	__LINK_STATE_PRESENT,
 	__LINK_STATE_NOCARRIER,
@@ -341,20 +336,20 @@
 	struct sk_buff		*skb;
 };
 
-enum
-{
+enum {
 	NAPI_STATE_SCHED,	/* Poll is scheduled */
 	NAPI_STATE_DISABLE,	/* Disable pending */
 	NAPI_STATE_NPSVC,	/* Netpoll - don't dequeue from poll_list */
 };
 
-enum {
+enum gro_result {
 	GRO_MERGED,
 	GRO_MERGED_FREE,
 	GRO_HELD,
 	GRO_NORMAL,
 	GRO_DROP,
 };
+typedef enum gro_result gro_result_t;
 
 extern void __napi_schedule(struct napi_struct *n);
 
@@ -457,8 +452,7 @@
 # define napi_synchronize(n)	barrier()
 #endif
 
-enum netdev_queue_state_t
-{
+enum netdev_queue_state_t {
 	__QUEUE_STATE_XOFF,
 	__QUEUE_STATE_FROZEN,
 };
@@ -635,6 +629,10 @@
 						      unsigned int sgc);
 	int			(*ndo_fcoe_ddp_done)(struct net_device *dev,
 						     u16 xid);
+#define NETDEV_FCOE_WWNN 0
+#define NETDEV_FCOE_WWPN 1
+	int			(*ndo_fcoe_get_wwn)(struct net_device *dev,
+						    u64 *wwn, int type);
 #endif
 };
 
@@ -648,8 +646,7 @@
  *	moves out.
  */
 
-struct net_device
-{
+struct net_device {
 
 	/*
 	 * This is the first field of the "visible" part of this structure
@@ -683,6 +680,7 @@
 
 	struct list_head	dev_list;
 	struct list_head	napi_list;
+	struct list_head	unreg_list;
 
 	/* Net device features */
 	unsigned long		features;
@@ -894,8 +892,8 @@
 
 	/* class/net/name entry */
 	struct device		dev;
-	/* space for optional statistics and wireless sysfs groups */
-	const struct attribute_group *sysfs_groups[3];
+	/* space for optional device, statistics, and wireless sysfs groups */
+	const struct attribute_group *sysfs_groups[4];
 
 	/* rtnetlink link ops */
 	const struct rtnl_link_ops *rtnl_link_ops;
@@ -909,7 +907,7 @@
 
 #ifdef CONFIG_DCB
 	/* Data Center Bridging netlink ops */
-	struct dcbnl_rtnl_ops *dcbnl_ops;
+	const struct dcbnl_rtnl_ops *dcbnl_ops;
 #endif
 
 #if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE)
@@ -1075,6 +1073,8 @@
 
 #define for_each_netdev(net, d)		\
 		list_for_each_entry(d, &(net)->dev_base_head, dev_list)
+#define for_each_netdev_rcu(net, d)		\
+		list_for_each_entry_rcu(d, &(net)->dev_base_head, dev_list)
 #define for_each_netdev_safe(net, d, n)	\
 		list_for_each_entry_safe(d, n, &(net)->dev_base_head, dev_list)
 #define for_each_netdev_continue(net, d)		\
@@ -1109,6 +1109,7 @@
 extern struct net_device	*dev_get_by_flags(struct net *net, unsigned short flags,
 						  unsigned short mask);
 extern struct net_device	*dev_get_by_name(struct net *net, const char *name);
+extern struct net_device	*dev_get_by_name_rcu(struct net *net, const char *name);
 extern struct net_device	*__dev_get_by_name(struct net *net, const char *name);
 extern int		dev_alloc_name(struct net_device *dev, const char *name);
 extern int		dev_open(struct net_device *dev);
@@ -1116,7 +1117,14 @@
 extern void		dev_disable_lro(struct net_device *dev);
 extern int		dev_queue_xmit(struct sk_buff *skb);
 extern int		register_netdevice(struct net_device *dev);
-extern void		unregister_netdevice(struct net_device *dev);
+extern void		unregister_netdevice_queue(struct net_device *dev,
+						   struct list_head *head);
+extern void		unregister_netdevice_many(struct list_head *head);
+static inline void unregister_netdevice(struct net_device *dev)
+{
+	unregister_netdevice_queue(dev, NULL);
+}
+
 extern void		free_netdev(struct net_device *dev);
 extern void		synchronize_net(void);
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
@@ -1127,6 +1135,7 @@
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
 extern struct net_device	*__dev_get_by_index(struct net *net, int ifindex);
+extern struct net_device	*dev_get_by_index_rcu(struct net *net, int ifindex);
 extern int		dev_restart(struct net_device *dev);
 #ifdef CONFIG_NETPOLL_TRAP
 extern int		netpoll_trap(void);
@@ -1212,8 +1221,7 @@
  * Incoming packets are placed on per-cpu queues so that
  * no locking is needed.
  */
-struct softnet_data
-{
+struct softnet_data {
 	struct Qdisc		*output_queue;
 	struct sk_buff_head	input_pkt_queue;
 	struct list_head	poll_list;
@@ -1467,18 +1475,19 @@
 #define HAVE_NETIF_RECEIVE_SKB 1
 extern int		netif_receive_skb(struct sk_buff *skb);
 extern void		napi_gro_flush(struct napi_struct *napi);
-extern int		dev_gro_receive(struct napi_struct *napi,
+extern gro_result_t	dev_gro_receive(struct napi_struct *napi,
 					struct sk_buff *skb);
-extern int		napi_skb_finish(int ret, struct sk_buff *skb);
-extern int		napi_gro_receive(struct napi_struct *napi,
+extern gro_result_t	napi_skb_finish(gro_result_t ret, struct sk_buff *skb);
+extern gro_result_t	napi_gro_receive(struct napi_struct *napi,
 					 struct sk_buff *skb);
 extern void		napi_reuse_skb(struct napi_struct *napi,
 				       struct sk_buff *skb);
 extern struct sk_buff *	napi_get_frags(struct napi_struct *napi);
-extern int		napi_frags_finish(struct napi_struct *napi,
-					  struct sk_buff *skb, int ret);
+extern gro_result_t	napi_frags_finish(struct napi_struct *napi,
+					  struct sk_buff *skb,
+					  gro_result_t ret);
 extern struct sk_buff *	napi_frags_skb(struct napi_struct *napi);
-extern int		napi_gro_frags(struct napi_struct *napi);
+extern gro_result_t	napi_gro_frags(struct napi_struct *napi);
 
 static inline void napi_free_frags(struct napi_struct *napi)
 {
@@ -1609,7 +1618,8 @@
  *
  * Check if carrier is operational
  */
-static inline int netif_oper_up(const struct net_device *dev) {
+static inline int netif_oper_up(const struct net_device *dev)
+{
 	return (dev->operstate == IF_OPER_UP ||
 		dev->operstate == IF_OPER_UNKNOWN /* backward compat */);
 }
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index 6132b5e..48c5496 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -93,8 +93,7 @@
 			       const struct net_device *out,
 			       int (*okfn)(struct sk_buff *));
 
-struct nf_hook_ops
-{
+struct nf_hook_ops {
 	struct list_head list;
 
 	/* User fills in from here down. */
@@ -106,8 +105,7 @@
 	int priority;
 };
 
-struct nf_sockopt_ops
-{
+struct nf_sockopt_ops {
 	struct list_head list;
 
 	u_int8_t pf;
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index a8248ee..a374787 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -3,8 +3,7 @@
 /* Connection state tracking for netfilter.  This is separated from,
    but required by, the NAT layer; it can also be used by an iptables
    extension. */
-enum ip_conntrack_info
-{
+enum ip_conntrack_info {
 	/* Part of an established connection (either direction). */
 	IP_CT_ESTABLISHED,
 
@@ -76,8 +75,7 @@
 };
 
 #ifdef __KERNEL__
-struct ip_conntrack_stat
-{
+struct ip_conntrack_stat {
 	unsigned int searched;
 	unsigned int found;
 	unsigned int new;
diff --git a/include/linux/netfilter/nf_conntrack_ftp.h b/include/linux/netfilter/nf_conntrack_ftp.h
index 47727d7..3e3aa08 100644
--- a/include/linux/netfilter/nf_conntrack_ftp.h
+++ b/include/linux/netfilter/nf_conntrack_ftp.h
@@ -3,8 +3,7 @@
 /* FTP tracking. */
 
 /* This enum is exposed to userspace */
-enum nf_ct_ftp_type
-{
+enum nf_ct_ftp_type {
 	/* PORT command from client */
 	NF_CT_FTP_PORT,
 	/* PASV response from server */
diff --git a/include/linux/netfilter/nf_conntrack_sctp.h b/include/linux/netfilter/nf_conntrack_sctp.h
index 768f78c..ceeefe6 100644
--- a/include/linux/netfilter/nf_conntrack_sctp.h
+++ b/include/linux/netfilter/nf_conntrack_sctp.h
@@ -16,8 +16,7 @@
 	SCTP_CONNTRACK_MAX
 };
 
-struct ip_ct_sctp
-{
+struct ip_ct_sctp {
 	enum sctp_conntrack state;
 
 	__be32 vtag[IP_CT_DIR_MAX];
diff --git a/include/linux/netfilter/nf_conntrack_tcp.h b/include/linux/netfilter/nf_conntrack_tcp.h
index 4352fee..f6d97f6 100644
--- a/include/linux/netfilter/nf_conntrack_tcp.h
+++ b/include/linux/netfilter/nf_conntrack_tcp.h
@@ -55,8 +55,7 @@
 	u_int8_t	flags;		/* per direction options */
 };
 
-struct ip_ct_tcp
-{
+struct ip_ct_tcp {
 	struct ip_ct_tcp_state seen[2];	/* connection parameters per direction */
 	u_int8_t	state;		/* state of the connection (enum tcp_conntrack) */
 	/* For detecting stale connections */
diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h
index 9f00da2..49d321f 100644
--- a/include/linux/netfilter/nfnetlink.h
+++ b/include/linux/netfilter/nfnetlink.h
@@ -55,8 +55,7 @@
 #include <linux/capability.h>
 #include <net/netlink.h>
 
-struct nfnl_callback
-{
+struct nfnl_callback {
 	int (*call)(struct sock *nl, struct sk_buff *skb, 
 		    const struct nlmsghdr *nlh,
 		    const struct nlattr * const cda[]);
@@ -64,8 +63,7 @@
 	const u_int16_t attr_count;		/* number of nlattr's */
 };
 
-struct nfnetlink_subsystem
-{
+struct nfnetlink_subsystem {
 	const char *name;
 	__u8 subsys_id;			/* nfnetlink subsystem ID */
 	__u8 cb_count;			/* number of callbacks */
diff --git a/include/linux/netfilter/nfnetlink_compat.h b/include/linux/netfilter/nfnetlink_compat.h
index eda55ca..ffb9503 100644
--- a/include/linux/netfilter/nfnetlink_compat.h
+++ b/include/linux/netfilter/nfnetlink_compat.h
@@ -21,8 +21,7 @@
  * ! nfnetlink use the same attributes methods. - J. Schulist.
  */
 
-struct nfattr
-{
+struct nfattr {
 	__u16 nfa_len;
 	__u16 nfa_type;	/* we use 15 bits for the type, and the highest
 				 * bit to indicate whether the payload is nested */
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 812cb15..378f27a 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -6,8 +6,7 @@
 #define XT_FUNCTION_MAXNAMELEN 30
 #define XT_TABLE_MAXNAMELEN 32
 
-struct xt_entry_match
-{
+struct xt_entry_match {
 	union {
 		struct {
 			__u16 match_size;
@@ -31,8 +30,7 @@
 	unsigned char data[0];
 };
 
-struct xt_entry_target
-{
+struct xt_entry_target {
 	union {
 		struct {
 			__u16 target_size;
@@ -64,16 +62,14 @@
 	},								       \
 }
 
-struct xt_standard_target
-{
+struct xt_standard_target {
 	struct xt_entry_target target;
 	int verdict;
 };
 
 /* The argument to IPT_SO_GET_REVISION_*.  Returns highest revision
  * kernel supports, if >= revision. */
-struct xt_get_revision
-{
+struct xt_get_revision {
 	char name[XT_FUNCTION_MAXNAMELEN-1];
 
 	__u8 revision;
@@ -90,8 +86,7 @@
  * ip6t_entry and arpt_entry.  This sucks, and it is a hack.  It will be my
  * personal pleasure to remove it -HW
  */
-struct _xt_align
-{
+struct _xt_align {
 	__u8 u8;
 	__u16 u16;
 	__u32 u32;
@@ -109,14 +104,12 @@
 #define SET_COUNTER(c,b,p) do { (c).bcnt = (b); (c).pcnt = (p); } while(0)
 #define ADD_COUNTER(c,b,p) do { (c).bcnt += (b); (c).pcnt += (p); } while(0)
 
-struct xt_counters
-{
+struct xt_counters {
 	__u64 pcnt, bcnt;			/* Packet and byte counters */
 };
 
 /* The argument to IPT_SO_ADD_COUNTERS. */
-struct xt_counters_info
-{
+struct xt_counters_info {
 	/* Which table. */
 	char name[XT_TABLE_MAXNAMELEN];
 
@@ -269,8 +262,7 @@
 	u_int8_t family;
 };
 
-struct xt_match
-{
+struct xt_match {
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
@@ -310,8 +302,7 @@
 };
 
 /* Registration hooks for targets. */
-struct xt_target
-{
+struct xt_target {
 	struct list_head list;
 
 	const char name[XT_FUNCTION_MAXNAMELEN-1];
@@ -349,8 +340,7 @@
 };
 
 /* Furniture shopping... */
-struct xt_table
-{
+struct xt_table {
 	struct list_head list;
 
 	/* What hooks you will enter on */
@@ -371,8 +361,7 @@
 #include <linux/netfilter_ipv4.h>
 
 /* The table itself */
-struct xt_table_info
-{
+struct xt_table_info {
 	/* Size per table */
 	unsigned int size;
 	/* Number of entries: FIXME. --RR */
@@ -528,8 +517,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_xt_entry_match
-{
+struct compat_xt_entry_match {
 	union {
 		struct {
 			u_int16_t match_size;
@@ -545,8 +533,7 @@
 	unsigned char data[0];
 };
 
-struct compat_xt_entry_target
-{
+struct compat_xt_entry_target {
 	union {
 		struct {
 			u_int16_t target_size;
@@ -566,8 +553,7 @@
  * need to change whole approach in order to calculate align as function of
  * current task alignment */
 
-struct compat_xt_counters
-{
+struct compat_xt_counters {
 #if defined(CONFIG_X86_64) || defined(CONFIG_IA64)
 	u_int32_t cnt[4];
 #else
@@ -575,8 +561,7 @@
 #endif
 };
 
-struct compat_xt_counters_info
-{
+struct compat_xt_counters_info {
 	char name[XT_TABLE_MAXNAMELEN];
 	compat_uint_t num_counters;
 	struct compat_xt_counters counters[0];
diff --git a/include/linux/netfilter/xt_connbytes.h b/include/linux/netfilter/xt_connbytes.h
index 52bd615..92fcbb0 100644
--- a/include/linux/netfilter/xt_connbytes.h
+++ b/include/linux/netfilter/xt_connbytes.h
@@ -15,8 +15,7 @@
 	XT_CONNBYTES_DIR_BOTH,
 };
 
-struct xt_connbytes_info
-{
+struct xt_connbytes_info {
 	struct {
 		aligned_u64 from;	/* count to be matched */
 		aligned_u64 to;		/* count to be matched */
diff --git a/include/linux/netfilter/xt_esp.h b/include/linux/netfilter/xt_esp.h
index ef6fa47..ee68824 100644
--- a/include/linux/netfilter/xt_esp.h
+++ b/include/linux/netfilter/xt_esp.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-struct xt_esp
-{
+struct xt_esp {
 	__u32 spis[2];	/* Security Parameter Index */
 	__u8  invflags;	/* Inverse flags */
 };
diff --git a/include/linux/netfilter/xt_multiport.h b/include/linux/netfilter/xt_multiport.h
index 185db49..5b7e72d 100644
--- a/include/linux/netfilter/xt_multiport.h
+++ b/include/linux/netfilter/xt_multiport.h
@@ -3,8 +3,7 @@
 
 #include <linux/types.h>
 
-enum xt_multiport_flags
-{
+enum xt_multiport_flags {
 	XT_MULTIPORT_SOURCE,
 	XT_MULTIPORT_DESTINATION,
 	XT_MULTIPORT_EITHER
@@ -13,15 +12,13 @@
 #define XT_MULTI_PORTS	15
 
 /* Must fit inside union xt_matchinfo: 16 bytes */
-struct xt_multiport
-{
+struct xt_multiport {
 	__u8 flags;				/* Type of comparison */
 	__u8 count;				/* Number of ports */
 	__u16 ports[XT_MULTI_PORTS];	/* Ports */
 };
 
-struct xt_multiport_v1
-{
+struct xt_multiport_v1 {
 	__u8 flags;				/* Type of comparison */
 	__u8 count;				/* Number of ports */
 	__u16 ports[XT_MULTI_PORTS];	/* Ports */
diff --git a/include/linux/netfilter/xt_policy.h b/include/linux/netfilter/xt_policy.h
index 7bb64e7..be8ead0 100644
--- a/include/linux/netfilter/xt_policy.h
+++ b/include/linux/netfilter/xt_policy.h
@@ -5,22 +5,19 @@
 
 #define XT_POLICY_MAX_ELEM	4
 
-enum xt_policy_flags
-{
+enum xt_policy_flags {
 	XT_POLICY_MATCH_IN	= 0x1,
 	XT_POLICY_MATCH_OUT	= 0x2,
 	XT_POLICY_MATCH_NONE	= 0x4,
 	XT_POLICY_MATCH_STRICT	= 0x8,
 };
 
-enum xt_policy_modes
-{
+enum xt_policy_modes {
 	XT_POLICY_MODE_TRANSPORT,
 	XT_POLICY_MODE_TUNNEL
 };
 
-struct xt_policy_spec
-{
+struct xt_policy_spec {
 	__u8	saddr:1,
 			daddr:1,
 			proto:1,
@@ -30,15 +27,13 @@
 };
 
 #ifndef __KERNEL__
-union xt_policy_addr
-{
+union xt_policy_addr {
 	struct in_addr	a4;
 	struct in6_addr	a6;
 };
 #endif
 
-struct xt_policy_elem
-{
+struct xt_policy_elem {
 	union {
 #ifdef __KERNEL__
 		struct {
@@ -65,8 +60,7 @@
 	struct xt_policy_spec	invert;
 };
 
-struct xt_policy_info
-{
+struct xt_policy_info {
 	struct xt_policy_elem pol[XT_POLICY_MAX_ELEM];
 	__u16 flags;
 	__u16 len;
diff --git a/include/linux/netfilter/xt_state.h b/include/linux/netfilter/xt_state.h
index c06f32e..7b32de8 100644
--- a/include/linux/netfilter/xt_state.h
+++ b/include/linux/netfilter/xt_state.h
@@ -6,8 +6,7 @@
 
 #define XT_STATE_UNTRACKED (1 << (IP_CT_NUMBER + 1))
 
-struct xt_state_info
-{
+struct xt_state_info {
 	unsigned int statemask;
 };
 #endif /*_XT_STATE_H*/
diff --git a/include/linux/netfilter/xt_string.h b/include/linux/netfilter/xt_string.h
index ecbb95f..235347c 100644
--- a/include/linux/netfilter/xt_string.h
+++ b/include/linux/netfilter/xt_string.h
@@ -11,8 +11,7 @@
 	XT_STRING_FLAG_IGNORECASE	= 0x02
 };
 
-struct xt_string_info
-{
+struct xt_string_info {
 	__u16 from_offset;
 	__u16 to_offset;
 	char	  algo[XT_STRING_MAX_ALGO_NAME_SIZE];
diff --git a/include/linux/netfilter/xt_tcpudp.h b/include/linux/netfilter/xt_tcpudp.h
index a490a0b..38aa7b3 100644
--- a/include/linux/netfilter/xt_tcpudp.h
+++ b/include/linux/netfilter/xt_tcpudp.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 
 /* TCP matching stuff */
-struct xt_tcp
-{
+struct xt_tcp {
 	__u16 spts[2];			/* Source port range. */
 	__u16 dpts[2];			/* Destination port range. */
 	__u8 option;			/* TCP Option iff non-zero*/
@@ -22,8 +21,7 @@
 #define XT_TCP_INV_MASK		0x0F	/* All possible flags. */
 
 /* UDP matching stuff */
-struct xt_udp
-{
+struct xt_udp {
 	__u16 spts[2];			/* Source port range. */
 	__u16 dpts[2];			/* Destination port range. */
 	__u8 invflags;			/* Inverse flags */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index 6fe3e6a..f233652 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -132,8 +132,7 @@
 #define ARPT_RETURN XT_RETURN
 
 /* The argument to ARPT_SO_GET_INFO */
-struct arpt_getinfo
-{
+struct arpt_getinfo {
 	/* Which table: caller fills this in. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -155,8 +154,7 @@
 };
 
 /* The argument to ARPT_SO_SET_REPLACE. */
-struct arpt_replace
-{
+struct arpt_replace {
 	/* Which table. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -191,8 +189,7 @@
 #define arpt_counters xt_counters
 
 /* The argument to ARPT_SO_GET_ENTRIES. */
-struct arpt_get_entries
-{
+struct arpt_get_entries {
 	/* Which table: user fills this in. */
 	char name[ARPT_TABLE_MAXNAMELEN];
 
@@ -224,20 +221,17 @@
 #ifdef __KERNEL__
 
 /* Standard entry. */
-struct arpt_standard
-{
+struct arpt_standard {
 	struct arpt_entry entry;
 	struct arpt_standard_target target;
 };
 
-struct arpt_error_target
-{
+struct arpt_error_target {
 	struct arpt_entry_target target;
 	char errorname[ARPT_FUNCTION_MAXNAMELEN];
 };
 
-struct arpt_error
-{
+struct arpt_error {
 	struct arpt_entry entry;
 	struct arpt_error_target target;
 };
@@ -279,8 +273,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_arpt_entry
-{
+struct compat_arpt_entry {
 	struct arpt_arp arp;
 	u_int16_t target_offset;
 	u_int16_t next_offset;
diff --git a/include/linux/netfilter_bridge/ebt_802_3.h b/include/linux/netfilter_bridge/ebt_802_3.h
index a11b0c2..c73ef0b 100644
--- a/include/linux/netfilter_bridge/ebt_802_3.h
+++ b/include/linux/netfilter_bridge/ebt_802_3.h
@@ -58,8 +58,7 @@
 }
 #endif
 
-struct ebt_802_3_info 
-{
+struct ebt_802_3_info {
 	uint8_t  sap;
 	__be16 type;
 	uint8_t  bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_among.h b/include/linux/netfilter_bridge/ebt_among.h
index 7654069..0009558 100644
--- a/include/linux/netfilter_bridge/ebt_among.h
+++ b/include/linux/netfilter_bridge/ebt_among.h
@@ -29,14 +29,12 @@
  * Yes, it is a memory overhead, but in 2003 AD, who cares?
  */
 
-struct ebt_mac_wormhash_tuple
-{
+struct ebt_mac_wormhash_tuple {
 	uint32_t cmp[2];
 	__be32 ip;
 };
 
-struct ebt_mac_wormhash
-{
+struct ebt_mac_wormhash {
 	int table[257];
 	int poolsize;
 	struct ebt_mac_wormhash_tuple pool[0];
@@ -45,8 +43,7 @@
 #define ebt_mac_wormhash_size(x) ((x) ? sizeof(struct ebt_mac_wormhash) \
 		+ (x)->poolsize * sizeof(struct ebt_mac_wormhash_tuple) : 0)
 
-struct ebt_among_info
-{
+struct ebt_among_info {
 	int wh_dst_ofs;
 	int wh_src_ofs;
 	int bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_arpreply.h b/include/linux/netfilter_bridge/ebt_arpreply.h
index 96a8339..7e77896 100644
--- a/include/linux/netfilter_bridge/ebt_arpreply.h
+++ b/include/linux/netfilter_bridge/ebt_arpreply.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_ARPREPLY_H
 #define __LINUX_BRIDGE_EBT_ARPREPLY_H
 
-struct ebt_arpreply_info
-{
+struct ebt_arpreply_info {
 	unsigned char mac[ETH_ALEN];
 	int target;
 };
diff --git a/include/linux/netfilter_bridge/ebt_ip.h b/include/linux/netfilter_bridge/ebt_ip.h
index d684747..6a708fb 100644
--- a/include/linux/netfilter_bridge/ebt_ip.h
+++ b/include/linux/netfilter_bridge/ebt_ip.h
@@ -26,8 +26,7 @@
 #define EBT_IP_MATCH "ip"
 
 /* the same values are used for the invflags */
-struct ebt_ip_info
-{
+struct ebt_ip_info {
 	__be32 saddr;
 	__be32 daddr;
 	__be32 smsk;
diff --git a/include/linux/netfilter_bridge/ebt_ip6.h b/include/linux/netfilter_bridge/ebt_ip6.h
index 2273c3a..e5de987 100644
--- a/include/linux/netfilter_bridge/ebt_ip6.h
+++ b/include/linux/netfilter_bridge/ebt_ip6.h
@@ -23,8 +23,7 @@
 #define EBT_IP6_MATCH "ip6"
 
 /* the same values are used for the invflags */
-struct ebt_ip6_info
-{
+struct ebt_ip6_info {
 	struct in6_addr saddr;
 	struct in6_addr daddr;
 	struct in6_addr smsk;
diff --git a/include/linux/netfilter_bridge/ebt_limit.h b/include/linux/netfilter_bridge/ebt_limit.h
index d8b6500..4bf76b7 100644
--- a/include/linux/netfilter_bridge/ebt_limit.h
+++ b/include/linux/netfilter_bridge/ebt_limit.h
@@ -9,8 +9,7 @@
 /* 1/10,000 sec period => max of 10,000/sec.  Min rate is then 429490
    seconds, or one every 59 hours. */
 
-struct ebt_limit_info
-{
+struct ebt_limit_info {
 	u_int32_t avg;    /* Average secs between packets * scale */
 	u_int32_t burst;  /* Period multiplier for upper limit. */
 
diff --git a/include/linux/netfilter_bridge/ebt_log.h b/include/linux/netfilter_bridge/ebt_log.h
index b76e653..cc2cdfb 100644
--- a/include/linux/netfilter_bridge/ebt_log.h
+++ b/include/linux/netfilter_bridge/ebt_log.h
@@ -9,8 +9,7 @@
 #define EBT_LOG_PREFIX_SIZE 30
 #define EBT_LOG_WATCHER "log"
 
-struct ebt_log_info
-{
+struct ebt_log_info {
 	uint8_t loglevel;
 	uint8_t prefix[EBT_LOG_PREFIX_SIZE];
 	uint32_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_mark_m.h b/include/linux/netfilter_bridge/ebt_mark_m.h
index 301524f..9ceb10e 100644
--- a/include/linux/netfilter_bridge/ebt_mark_m.h
+++ b/include/linux/netfilter_bridge/ebt_mark_m.h
@@ -4,8 +4,7 @@
 #define EBT_MARK_AND 0x01
 #define EBT_MARK_OR 0x02
 #define EBT_MARK_MASK (EBT_MARK_AND | EBT_MARK_OR)
-struct ebt_mark_m_info
-{
+struct ebt_mark_m_info {
 	unsigned long mark, mask;
 	uint8_t invert;
 	uint8_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebt_mark_t.h b/include/linux/netfilter_bridge/ebt_mark_t.h
index 6270f6f..7d5a268 100644
--- a/include/linux/netfilter_bridge/ebt_mark_t.h
+++ b/include/linux/netfilter_bridge/ebt_mark_t.h
@@ -13,8 +13,7 @@
 #define MARK_AND_VALUE (0xffffffd0)
 #define MARK_XOR_VALUE (0xffffffc0)
 
-struct ebt_mark_t_info
-{
+struct ebt_mark_t_info {
 	unsigned long mark;
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
diff --git a/include/linux/netfilter_bridge/ebt_nat.h b/include/linux/netfilter_bridge/ebt_nat.h
index 435b886..5e74e3b 100644
--- a/include/linux/netfilter_bridge/ebt_nat.h
+++ b/include/linux/netfilter_bridge/ebt_nat.h
@@ -2,8 +2,7 @@
 #define __LINUX_BRIDGE_EBT_NAT_H
 
 #define NAT_ARP_BIT  (0x00000010)
-struct ebt_nat_info
-{
+struct ebt_nat_info {
 	unsigned char mac[ETH_ALEN];
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
diff --git a/include/linux/netfilter_bridge/ebt_pkttype.h b/include/linux/netfilter_bridge/ebt_pkttype.h
index 0d64bbb..51a7998 100644
--- a/include/linux/netfilter_bridge/ebt_pkttype.h
+++ b/include/linux/netfilter_bridge/ebt_pkttype.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_PKTTYPE_H
 #define __LINUX_BRIDGE_EBT_PKTTYPE_H
 
-struct ebt_pkttype_info
-{
+struct ebt_pkttype_info {
 	uint8_t pkt_type;
 	uint8_t invert;
 };
diff --git a/include/linux/netfilter_bridge/ebt_redirect.h b/include/linux/netfilter_bridge/ebt_redirect.h
index 5c67990..dd9622c 100644
--- a/include/linux/netfilter_bridge/ebt_redirect.h
+++ b/include/linux/netfilter_bridge/ebt_redirect.h
@@ -1,8 +1,7 @@
 #ifndef __LINUX_BRIDGE_EBT_REDIRECT_H
 #define __LINUX_BRIDGE_EBT_REDIRECT_H
 
-struct ebt_redirect_info
-{
+struct ebt_redirect_info {
 	/* EBT_ACCEPT, EBT_DROP, EBT_CONTINUE or EBT_RETURN */
 	int target;
 };
diff --git a/include/linux/netfilter_bridge/ebt_stp.h b/include/linux/netfilter_bridge/ebt_stp.h
index e5fd678..e503a0a 100644
--- a/include/linux/netfilter_bridge/ebt_stp.h
+++ b/include/linux/netfilter_bridge/ebt_stp.h
@@ -20,8 +20,7 @@
 
 #define EBT_STP_MATCH "stp"
 
-struct ebt_stp_config_info
-{
+struct ebt_stp_config_info {
 	uint8_t flags;
 	uint16_t root_priol, root_priou;
 	char root_addr[6], root_addrmsk[6];
@@ -35,8 +34,7 @@
 	uint16_t forward_delayl, forward_delayu;
 };
 
-struct ebt_stp_info
-{
+struct ebt_stp_info {
 	uint8_t type;
 	struct ebt_stp_config_info config;
 	uint16_t bitmask;
diff --git a/include/linux/netfilter_bridge/ebtables.h b/include/linux/netfilter_bridge/ebtables.h
index ea281e6..3cc40c1 100644
--- a/include/linux/netfilter_bridge/ebtables.h
+++ b/include/linux/netfilter_bridge/ebtables.h
@@ -34,14 +34,12 @@
 struct xt_match;
 struct xt_target;
 
-struct ebt_counter
-{
+struct ebt_counter {
 	uint64_t pcnt;
 	uint64_t bcnt;
 };
 
-struct ebt_replace
-{
+struct ebt_replace {
 	char name[EBT_TABLE_MAXNAMELEN];
 	unsigned int valid_hooks;
 	/* nr of rules in the table */
@@ -57,8 +55,7 @@
 	char __user *entries;
 };
 
-struct ebt_replace_kernel
-{
+struct ebt_replace_kernel {
 	char name[EBT_TABLE_MAXNAMELEN];
 	unsigned int valid_hooks;
 	/* nr of rules in the table */
@@ -120,8 +117,7 @@
 #define EBT_INV_MASK (EBT_IPROTO | EBT_IIN | EBT_IOUT | EBT_ILOGICALIN \
    | EBT_ILOGICALOUT | EBT_ISOURCE | EBT_IDEST)
 
-struct ebt_entry_match
-{
+struct ebt_entry_match {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_match *match;
@@ -131,8 +127,7 @@
 	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
 };
 
-struct ebt_entry_watcher
-{
+struct ebt_entry_watcher {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_target *watcher;
@@ -142,8 +137,7 @@
 	unsigned char data[0] __attribute__ ((aligned (__alignof__(struct ebt_replace))));
 };
 
-struct ebt_entry_target
-{
+struct ebt_entry_target {
 	union {
 		char name[EBT_FUNCTION_MAXNAMELEN];
 		struct xt_target *target;
@@ -154,8 +148,7 @@
 };
 
 #define EBT_STANDARD_TARGET "standard"
-struct ebt_standard_target
-{
+struct ebt_standard_target {
 	struct ebt_entry_target target;
 	int verdict;
 };
@@ -206,8 +199,7 @@
 #define EBT_MATCH 0
 #define EBT_NOMATCH 1
 
-struct ebt_match
-{
+struct ebt_match {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	bool (*match)(const struct sk_buff *skb, const struct net_device *in,
@@ -224,8 +216,7 @@
 	struct module *me;
 };
 
-struct ebt_watcher
-{
+struct ebt_watcher {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	unsigned int (*target)(struct sk_buff *skb,
@@ -242,8 +233,7 @@
 	struct module *me;
 };
 
-struct ebt_target
-{
+struct ebt_target {
 	struct list_head list;
 	const char name[EBT_FUNCTION_MAXNAMELEN];
 	/* returns one of the standard EBT_* verdicts */
@@ -262,15 +252,13 @@
 };
 
 /* used for jumping from and into user defined chains (udc) */
-struct ebt_chainstack
-{
+struct ebt_chainstack {
 	struct ebt_entries *chaininfo; /* pointer to chain data */
 	struct ebt_entry *e; /* pointer to entry data */
 	unsigned int n; /* n'th entry */
 };
 
-struct ebt_table_info
-{
+struct ebt_table_info {
 	/* total size of the entries */
 	unsigned int entries_size;
 	unsigned int nentries;
@@ -282,8 +270,7 @@
 	struct ebt_counter counters[0] ____cacheline_aligned;
 };
 
-struct ebt_table
-{
+struct ebt_table {
 	struct list_head list;
 	char name[EBT_TABLE_MAXNAMELEN];
 	struct ebt_replace_kernel *table;
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index 61fafc8..27b3f58 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -76,8 +76,7 @@
 /* This structure defines each of the firewall rules.  Consists of 3
    parts which are 1) general IP header stuff 2) match specific
    stuff 3) the target to perform if the rule matches */
-struct ipt_entry
-{
+struct ipt_entry {
 	struct ipt_ip ip;
 
 	/* Mark with fields that we care about. */
@@ -135,8 +134,7 @@
 #define IPT_UDP_INV_MASK	XT_UDP_INV_MASK
 
 /* ICMP matching stuff */
-struct ipt_icmp
-{
+struct ipt_icmp {
 	u_int8_t type;				/* type to match */
 	u_int8_t code[2];			/* range of code */
 	u_int8_t invflags;			/* Inverse flags */
@@ -146,8 +144,7 @@
 #define IPT_ICMP_INV	0x01	/* Invert the sense of type/code test */
 
 /* The argument to IPT_SO_GET_INFO */
-struct ipt_getinfo
-{
+struct ipt_getinfo {
 	/* Which table: caller fills this in. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -169,8 +166,7 @@
 };
 
 /* The argument to IPT_SO_SET_REPLACE. */
-struct ipt_replace
-{
+struct ipt_replace {
 	/* Which table. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -204,8 +200,7 @@
 #define ipt_counters_info xt_counters_info
 
 /* The argument to IPT_SO_GET_ENTRIES. */
-struct ipt_get_entries
-{
+struct ipt_get_entries {
 	/* Which table: user fills this in. */
 	char name[IPT_TABLE_MAXNAMELEN];
 
@@ -250,20 +245,17 @@
 extern void ipt_unregister_table(struct xt_table *table);
 
 /* Standard entry. */
-struct ipt_standard
-{
+struct ipt_standard {
 	struct ipt_entry entry;
 	struct ipt_standard_target target;
 };
 
-struct ipt_error_target
-{
+struct ipt_error_target {
 	struct ipt_entry_target target;
 	char errorname[IPT_FUNCTION_MAXNAMELEN];
 };
 
-struct ipt_error
-{
+struct ipt_error {
 	struct ipt_entry entry;
 	struct ipt_error_target target;
 };
@@ -301,8 +293,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_ipt_entry
-{
+struct compat_ipt_entry {
 	struct ipt_ip ip;
 	compat_uint_t nfcache;
 	u_int16_t target_offset;
diff --git a/include/linux/netfilter_ipv4/ipt_SAME.h b/include/linux/netfilter_ipv4/ipt_SAME.h
index be6e682..2529660 100644
--- a/include/linux/netfilter_ipv4/ipt_SAME.h
+++ b/include/linux/netfilter_ipv4/ipt_SAME.h
@@ -5,8 +5,7 @@
 
 #define IPT_SAME_NODST		0x01
 
-struct ipt_same_info
-{
+struct ipt_same_info {
 	unsigned char info;
 	u_int32_t rangesize;
 	u_int32_t ipnum;
diff --git a/include/linux/netfilter_ipv4/ipt_ah.h b/include/linux/netfilter_ipv4/ipt_ah.h
index 7b9a2ac..2e555b4 100644
--- a/include/linux/netfilter_ipv4/ipt_ah.h
+++ b/include/linux/netfilter_ipv4/ipt_ah.h
@@ -1,8 +1,7 @@
 #ifndef _IPT_AH_H
 #define _IPT_AH_H
 
-struct ipt_ah
-{
+struct ipt_ah {
 	u_int32_t spis[2];			/* Security Parameter Index */
 	u_int8_t  invflags;			/* Inverse flags */
 };
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index a64e145..b31050d 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -88,8 +88,7 @@
 /* This structure defines each of the firewall rules.  Consists of 3
    parts which are 1) general IP header stuff 2) match specific
    stuff 3) the target to perform if the rule matches */
-struct ip6t_entry
-{
+struct ip6t_entry {
 	struct ip6t_ip6 ipv6;
 
 	/* Mark with fields that we care about. */
@@ -111,20 +110,17 @@
 };
 
 /* Standard entry */
-struct ip6t_standard
-{
+struct ip6t_standard {
 	struct ip6t_entry entry;
 	struct ip6t_standard_target target;
 };
 
-struct ip6t_error_target
-{
+struct ip6t_error_target {
 	struct ip6t_entry_target target;
 	char errorname[IP6T_FUNCTION_MAXNAMELEN];
 };
 
-struct ip6t_error
-{
+struct ip6t_error {
 	struct ip6t_entry entry;
 	struct ip6t_error_target target;
 };
@@ -195,8 +191,7 @@
 #define IP6T_UDP_INV_MASK	XT_UDP_INV_MASK
 
 /* ICMP matching stuff */
-struct ip6t_icmp
-{
+struct ip6t_icmp {
 	u_int8_t type;				/* type to match */
 	u_int8_t code[2];			/* range of code */
 	u_int8_t invflags;			/* Inverse flags */
@@ -206,8 +201,7 @@
 #define IP6T_ICMP_INV	0x01	/* Invert the sense of type/code test */
 
 /* The argument to IP6T_SO_GET_INFO */
-struct ip6t_getinfo
-{
+struct ip6t_getinfo {
 	/* Which table: caller fills this in. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -229,8 +223,7 @@
 };
 
 /* The argument to IP6T_SO_SET_REPLACE. */
-struct ip6t_replace
-{
+struct ip6t_replace {
 	/* Which table. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -264,8 +257,7 @@
 #define ip6t_counters_info xt_counters_info
 
 /* The argument to IP6T_SO_GET_ENTRIES. */
-struct ip6t_get_entries
-{
+struct ip6t_get_entries {
 	/* Which table: user fills this in. */
 	char name[IP6T_TABLE_MAXNAMELEN];
 
@@ -330,8 +322,7 @@
 #ifdef CONFIG_COMPAT
 #include <net/compat.h>
 
-struct compat_ip6t_entry
-{
+struct compat_ip6t_entry {
 	struct ip6t_ip6 ipv6;
 	compat_uint_t nfcache;
 	u_int16_t target_offset;
diff --git a/include/linux/netfilter_ipv6/ip6t_ah.h b/include/linux/netfilter_ipv6/ip6t_ah.h
index 8531879..17a745c 100644
--- a/include/linux/netfilter_ipv6/ip6t_ah.h
+++ b/include/linux/netfilter_ipv6/ip6t_ah.h
@@ -1,8 +1,7 @@
 #ifndef _IP6T_AH_H
 #define _IP6T_AH_H
 
-struct ip6t_ah
-{
+struct ip6t_ah {
 	u_int32_t spis[2];			/* Security Parameter Index */
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t  hdrres;			/* Test of the Reserved Filed */
diff --git a/include/linux/netfilter_ipv6/ip6t_frag.h b/include/linux/netfilter_ipv6/ip6t_frag.h
index 66070a0..3724d08 100644
--- a/include/linux/netfilter_ipv6/ip6t_frag.h
+++ b/include/linux/netfilter_ipv6/ip6t_frag.h
@@ -1,8 +1,7 @@
 #ifndef _IP6T_FRAG_H
 #define _IP6T_FRAG_H
 
-struct ip6t_frag
-{
+struct ip6t_frag {
 	u_int32_t ids[2];			/* Security Parameter Index */
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t  flags;			/*  */
diff --git a/include/linux/netfilter_ipv6/ip6t_ipv6header.h b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
index 51c53fc..01dfd44 100644
--- a/include/linux/netfilter_ipv6/ip6t_ipv6header.h
+++ b/include/linux/netfilter_ipv6/ip6t_ipv6header.h
@@ -8,8 +8,7 @@
 #ifndef __IPV6HEADER_H
 #define __IPV6HEADER_H
 
-struct ip6t_ipv6header_info
-{
+struct ip6t_ipv6header_info {
 	u_int8_t matchflags;
 	u_int8_t invflags;
 	u_int8_t modeflag;
diff --git a/include/linux/netfilter_ipv6/ip6t_mh.h b/include/linux/netfilter_ipv6/ip6t_mh.h
index b9ca9a5..18549bc 100644
--- a/include/linux/netfilter_ipv6/ip6t_mh.h
+++ b/include/linux/netfilter_ipv6/ip6t_mh.h
@@ -2,8 +2,7 @@
 #define _IP6T_MH_H
 
 /* MH matching stuff */
-struct ip6t_mh
-{
+struct ip6t_mh {
 	u_int8_t types[2];	/* MH type range */
 	u_int8_t invflags;	/* Inverse flags */
 };
diff --git a/include/linux/netfilter_ipv6/ip6t_opts.h b/include/linux/netfilter_ipv6/ip6t_opts.h
index a07e363..62d89bc 100644
--- a/include/linux/netfilter_ipv6/ip6t_opts.h
+++ b/include/linux/netfilter_ipv6/ip6t_opts.h
@@ -3,8 +3,7 @@
 
 #define IP6T_OPTS_OPTSNR 16
 
-struct ip6t_opts
-{
+struct ip6t_opts {
 	u_int32_t hdrlen;			/* Header Length */
 	u_int8_t flags;				/*  */
 	u_int8_t invflags;			/* Inverse flags */
diff --git a/include/linux/netfilter_ipv6/ip6t_rt.h b/include/linux/netfilter_ipv6/ip6t_rt.h
index 5215602..ab91bfd 100644
--- a/include/linux/netfilter_ipv6/ip6t_rt.h
+++ b/include/linux/netfilter_ipv6/ip6t_rt.h
@@ -5,8 +5,7 @@
 
 #define IP6T_RT_HOPS 16
 
-struct ip6t_rt
-{
+struct ip6t_rt {
 	u_int32_t rt_type;			/* Routing Type */
 	u_int32_t segsleft[2];			/* Segments Left */
 	u_int32_t hdrlen;			/* Header Length */
diff --git a/include/linux/netlink.h b/include/linux/netlink.h
index ab5d312..fde27c0 100644
--- a/include/linux/netlink.h
+++ b/include/linux/netlink.h
@@ -29,16 +29,14 @@
 
 struct net;
 
-struct sockaddr_nl
-{
+struct sockaddr_nl {
 	sa_family_t	nl_family;	/* AF_NETLINK	*/
 	unsigned short	nl_pad;		/* zero		*/
 	__u32		nl_pid;		/* port ID	*/
        	__u32		nl_groups;	/* multicast groups mask */
 };
 
-struct nlmsghdr
-{
+struct nlmsghdr {
 	__u32		nlmsg_len;	/* Length of message including header */
 	__u16		nlmsg_type;	/* Message content */
 	__u16		nlmsg_flags;	/* Additional flags */
@@ -94,8 +92,7 @@
 
 #define NLMSG_MIN_TYPE		0x10	/* < 0x10: reserved control messages */
 
-struct nlmsgerr
-{
+struct nlmsgerr {
 	int		error;
 	struct nlmsghdr msg;
 };
@@ -106,8 +103,7 @@
 #define NETLINK_BROADCAST_ERROR	4
 #define NETLINK_NO_ENOBUFS	5
 
-struct nl_pktinfo
-{
+struct nl_pktinfo {
 	__u32	group;
 };
 
@@ -127,8 +123,7 @@
  *  <-------------- nlattr->nla_len -------------->
  */
 
-struct nlattr
-{
+struct nlattr {
 	__u16           nla_len;
 	__u16           nla_type;
 };
@@ -161,8 +156,7 @@
 	return (struct nlmsghdr *)skb->data;
 }
 
-struct netlink_skb_parms
-{
+struct netlink_skb_parms {
 	struct ucred		creds;		/* Skb credentials	*/
 	__u32			pid;
 	__u32			dst_group;
@@ -220,8 +214,7 @@
 #define NLMSG_DEFAULT_SIZE (NLMSG_GOODSIZE - NLMSG_HDRLEN)
 
 
-struct netlink_callback
-{
+struct netlink_callback {
 	struct sk_buff		*skb;
 	const struct nlmsghdr	*nlh;
 	int			(*dump)(struct sk_buff * skb,
@@ -231,8 +224,7 @@
 	long			args[6];
 };
 
-struct netlink_notify
-{
+struct netlink_notify {
 	struct net *net;
 	int pid;
 	int protocol;
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index f6b9024..d09db1b 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -40,7 +40,6 @@
 #ifdef __KERNEL__
 
 #include <linux/in.h>
-#include <linux/kref.h>
 #include <linux/mm.h>
 #include <linux/pagemap.h>
 #include <linux/rbtree.h>
diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h
index a8d71ed..50afca3 100644
--- a/include/linux/nl80211.h
+++ b/include/linux/nl80211.h
@@ -1277,6 +1277,7 @@
  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
  *	in unspecified units, scaled to 0..100 (u8)
  * @NL80211_BSS_STATUS: status, if this BSS is "used"
+ * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
  * @__NL80211_BSS_AFTER_LAST: internal
  * @NL80211_BSS_MAX: highest BSS attribute
  */
@@ -1291,6 +1292,7 @@
 	NL80211_BSS_SIGNAL_MBM,
 	NL80211_BSS_SIGNAL_UNSPEC,
 	NL80211_BSS_STATUS,
+	NL80211_BSS_SEEN_MS_AGO,
 
 	/* keep last */
 	__NL80211_BSS_AFTER_LAST,
diff --git a/include/linux/notifier.h b/include/linux/notifier.h
index 44428d2..29714b8 100644
--- a/include/linux/notifier.h
+++ b/include/linux/notifier.h
@@ -201,6 +201,7 @@
 #define NETDEV_PRE_UP		0x000D
 #define NETDEV_BONDING_OLDTYPE  0x000E
 #define NETDEV_BONDING_NEWTYPE  0x000F
+#define NETDEV_POST_INIT	0x0010
 
 #define SYS_DOWN	0x0001	/* Notify of system down */
 #define SYS_RESTART	SYS_DOWN
diff --git a/include/linux/perf_counter.h b/include/linux/perf_counter.h
index 368bd70..7b7fbf4 100644
--- a/include/linux/perf_counter.h
+++ b/include/linux/perf_counter.h
@@ -361,7 +361,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
-	 *	{ u64				time;     } && PERF_SAMPLE_TIME
+	 *	u64				time;
 	 * };
 	 */
 	PERF_EVENT_FORK			= 7,
diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h
index acefaf7..3a9d36d 100644
--- a/include/linux/perf_event.h
+++ b/include/linux/perf_event.h
@@ -357,7 +357,7 @@
 	 *	struct perf_event_header	header;
 	 *	u32				pid, ppid;
 	 *	u32				tid, ptid;
-	 *	{ u64				time;     } && PERF_SAMPLE_TIME
+	 *	u64				time;
 	 * };
 	 */
 	PERF_RECORD_FORK			= 7,
diff --git a/include/linux/pkt_cls.h b/include/linux/pkt_cls.h
index 3c842ed..7f6ba86 100644
--- a/include/linux/pkt_cls.h
+++ b/include/linux/pkt_cls.h
@@ -75,8 +75,7 @@
 #define SET_TC_AT(v,n)   ((V_TC_AT(n)) | (v & ~M_TC_AT))
 
 /* Action attributes */
-enum
-{
+enum {
 	TCA_ACT_UNSPEC,
 	TCA_ACT_KIND,
 	TCA_ACT_OPTIONS,
@@ -108,8 +107,7 @@
 #define TC_ACT_JUMP		0x10000000
 
 /* Action type identifiers*/
-enum
-{
+enum {
 	TCA_ID_UNSPEC=0,
 	TCA_ID_POLICE=1,
 	/* other actions go here */
@@ -118,8 +116,7 @@
 
 #define TCA_ID_MAX __TCA_ID_MAX
 
-struct tc_police
-{
+struct tc_police {
 	__u32			index;
 	int			action;
 #define TC_POLICE_UNSPEC	TC_ACT_UNSPEC
@@ -138,15 +135,13 @@
 	__u32			capab;
 };
 
-struct tcf_t
-{
+struct tcf_t {
 	__u64   install;
 	__u64   lastuse;
 	__u64   expires;
 };
 
-struct tc_cnt
-{
+struct tc_cnt {
 	int                   refcnt; 
 	int                   bindcnt;
 };
@@ -158,8 +153,7 @@
 	int                   refcnt; \
 	int                   bindcnt
 
-enum
-{
+enum {
 	TCA_POLICE_UNSPEC,
 	TCA_POLICE_TBF,
 	TCA_POLICE_RATE,
@@ -182,8 +176,7 @@
 #define TC_U32_UNSPEC	0
 #define TC_U32_ROOT	(0xFFF00000)
 
-enum
-{
+enum {
 	TCA_U32_UNSPEC,
 	TCA_U32_CLASSID,
 	TCA_U32_HASH,
@@ -200,16 +193,14 @@
 
 #define TCA_U32_MAX (__TCA_U32_MAX - 1)
 
-struct tc_u32_key
-{
+struct tc_u32_key {
 	__be32		mask;
 	__be32		val;
 	int		off;
 	int		offmask;
 };
 
-struct tc_u32_sel
-{
+struct tc_u32_sel {
 	unsigned char		flags;
 	unsigned char		offshift;
 	unsigned char		nkeys;
@@ -223,15 +214,13 @@
 	struct tc_u32_key	keys[0];
 };
 
-struct tc_u32_mark
-{
+struct tc_u32_mark {
 	__u32		val;
 	__u32		mask;
 	__u32		success;
 };
 
-struct tc_u32_pcnt
-{
+struct tc_u32_pcnt {
 	__u64 rcnt;
 	__u64 rhit;
 	__u64 kcnts[0];
@@ -249,8 +238,7 @@
 
 /* RSVP filter */
 
-enum
-{
+enum {
 	TCA_RSVP_UNSPEC,
 	TCA_RSVP_CLASSID,
 	TCA_RSVP_DST,
@@ -263,15 +251,13 @@
 
 #define TCA_RSVP_MAX (__TCA_RSVP_MAX - 1 )
 
-struct tc_rsvp_gpi
-{
+struct tc_rsvp_gpi {
 	__u32	key;
 	__u32	mask;
 	int	offset;
 };
 
-struct tc_rsvp_pinfo
-{
+struct tc_rsvp_pinfo {
 	struct tc_rsvp_gpi dpi;
 	struct tc_rsvp_gpi spi;
 	__u8	protocol;
@@ -282,8 +268,7 @@
 
 /* ROUTE filter */
 
-enum
-{
+enum {
 	TCA_ROUTE4_UNSPEC,
 	TCA_ROUTE4_CLASSID,
 	TCA_ROUTE4_TO,
@@ -299,8 +284,7 @@
 
 /* FW filter */
 
-enum
-{
+enum {
 	TCA_FW_UNSPEC,
 	TCA_FW_CLASSID,
 	TCA_FW_POLICE,
@@ -314,8 +298,7 @@
 
 /* TC index filter */
 
-enum
-{
+enum {
 	TCA_TCINDEX_UNSPEC,
 	TCA_TCINDEX_HASH,
 	TCA_TCINDEX_MASK,
@@ -331,8 +314,7 @@
 
 /* Flow filter */
 
-enum
-{
+enum {
 	FLOW_KEY_SRC,
 	FLOW_KEY_DST,
 	FLOW_KEY_PROTO,
@@ -355,14 +337,12 @@
 
 #define FLOW_KEY_MAX	(__FLOW_KEY_MAX - 1)
 
-enum
-{
+enum {
 	FLOW_MODE_MAP,
 	FLOW_MODE_HASH,
 };
 
-enum
-{
+enum {
 	TCA_FLOW_UNSPEC,
 	TCA_FLOW_KEYS,
 	TCA_FLOW_MODE,
@@ -383,8 +363,7 @@
 
 /* Basic filter */
 
-enum
-{
+enum {
 	TCA_BASIC_UNSPEC,
 	TCA_BASIC_CLASSID,
 	TCA_BASIC_EMATCHES,
@@ -398,8 +377,7 @@
 
 /* Cgroup classifier */
 
-enum
-{
+enum {
 	TCA_CGROUP_UNSPEC,
 	TCA_CGROUP_ACT,
 	TCA_CGROUP_POLICE,
@@ -411,14 +389,12 @@
 
 /* Extended Matches */
 
-struct tcf_ematch_tree_hdr
-{
+struct tcf_ematch_tree_hdr {
 	__u16		nmatches;
 	__u16		progid;
 };
 
-enum
-{
+enum {
 	TCA_EMATCH_TREE_UNSPEC,
 	TCA_EMATCH_TREE_HDR,
 	TCA_EMATCH_TREE_LIST,
@@ -426,8 +402,7 @@
 };
 #define TCA_EMATCH_TREE_MAX (__TCA_EMATCH_TREE_MAX - 1)
 
-struct tcf_ematch_hdr
-{
+struct tcf_ematch_hdr {
 	__u16		matchid;
 	__u16		kind;
 	__u16		flags;
@@ -457,8 +432,7 @@
 #define TCF_EM_REL_MASK	3
 #define TCF_EM_REL_VALID(v) (((v) & TCF_EM_REL_MASK) != TCF_EM_REL_MASK)
 
-enum
-{
+enum {
 	TCF_LAYER_LINK,
 	TCF_LAYER_NETWORK,
 	TCF_LAYER_TRANSPORT,
@@ -479,13 +453,11 @@
 #define        TCF_EM_VLAN		6
 #define	TCF_EM_MAX		6
 
-enum
-{
+enum {
 	TCF_EM_PROG_TC
 };
 
-enum
-{
+enum {
 	TCF_EM_OPND_EQ,
 	TCF_EM_OPND_GT,
 	TCF_EM_OPND_LT
diff --git a/include/linux/pkt_sched.h b/include/linux/pkt_sched.h
index d51a2b3..2cfa4bc 100644
--- a/include/linux/pkt_sched.h
+++ b/include/linux/pkt_sched.h
@@ -29,8 +29,7 @@
    Particular schedulers may have also their private records.
  */
 
-struct tc_stats
-{
+struct tc_stats {
 	__u64	bytes;			/* NUmber of enqueues bytes */
 	__u32	packets;		/* Number of enqueued packets	*/
 	__u32	drops;			/* Packets dropped because of lack of resources */
@@ -42,8 +41,7 @@
 	__u32	backlog;
 };
 
-struct tc_estimator
-{
+struct tc_estimator {
 	signed char	interval;
 	unsigned char	ewma_log;
 };
@@ -75,8 +73,7 @@
 #define TC_H_ROOT	(0xFFFFFFFFU)
 #define TC_H_INGRESS    (0xFFFFFFF1U)
 
-struct tc_ratespec
-{
+struct tc_ratespec {
 	unsigned char	cell_log;
 	unsigned char	__reserved;
 	unsigned short	overhead;
@@ -109,8 +106,7 @@
 
 /* FIFO section */
 
-struct tc_fifo_qopt
-{
+struct tc_fifo_qopt {
 	__u32	limit;	/* Queue length: bytes for bfifo, packets for pfifo */
 };
 
@@ -119,8 +115,7 @@
 #define TCQ_PRIO_BANDS	16
 #define TCQ_MIN_PRIO_BANDS 2
 
-struct tc_prio_qopt
-{
+struct tc_prio_qopt {
 	int	bands;			/* Number of bands */
 	__u8	priomap[TC_PRIO_MAX+1];	/* Map: logical priority -> PRIO band */
 };
@@ -134,8 +129,7 @@
 
 /* TBF section */
 
-struct tc_tbf_qopt
-{
+struct tc_tbf_qopt {
 	struct tc_ratespec rate;
 	struct tc_ratespec peakrate;
 	__u32		limit;
@@ -143,8 +137,7 @@
 	__u32		mtu;
 };
 
-enum
-{
+enum {
 	TCA_TBF_UNSPEC,
 	TCA_TBF_PARMS,
 	TCA_TBF_RTAB,
@@ -161,8 +154,7 @@
 
 /* SFQ section */
 
-struct tc_sfq_qopt
-{
+struct tc_sfq_qopt {
 	unsigned	quantum;	/* Bytes per round allocated to flow */
 	int		perturb_period;	/* Period of hash perturbation */
 	__u32		limit;		/* Maximal packets in queue */
@@ -170,8 +162,7 @@
 	unsigned	flows;		/* Maximal number of flows  */
 };
 
-struct tc_sfq_xstats
-{
+struct tc_sfq_xstats {
 	__s32		allot;
 };
 
@@ -186,8 +177,7 @@
 
 /* RED section */
 
-enum
-{
+enum {
 	TCA_RED_UNSPEC,
 	TCA_RED_PARMS,
 	TCA_RED_STAB,
@@ -196,8 +186,7 @@
 
 #define TCA_RED_MAX (__TCA_RED_MAX - 1)
 
-struct tc_red_qopt
-{
+struct tc_red_qopt {
 	__u32		limit;		/* HARD maximal queue length (bytes)	*/
 	__u32		qth_min;	/* Min average length threshold (bytes) */
 	__u32		qth_max;	/* Max average length threshold (bytes) */
@@ -209,8 +198,7 @@
 #define TC_RED_HARDDROP	2
 };
 
-struct tc_red_xstats
-{
+struct tc_red_xstats {
 	__u32           early;          /* Early drops */
 	__u32           pdrop;          /* Drops due to queue limits */
 	__u32           other;          /* Drops due to drop() calls */
@@ -221,8 +209,7 @@
 
 #define MAX_DPs 16
 
-enum
-{
+enum {
        TCA_GRED_UNSPEC,
        TCA_GRED_PARMS,
        TCA_GRED_STAB,
@@ -232,8 +219,7 @@
 
 #define TCA_GRED_MAX (__TCA_GRED_MAX - 1)
 
-struct tc_gred_qopt
-{
+struct tc_gred_qopt {
 	__u32		limit;        /* HARD maximal queue length (bytes)    */
 	__u32		qth_min;      /* Min average length threshold (bytes) */
 	__u32		qth_max;      /* Max average length threshold (bytes) */
@@ -253,8 +239,7 @@
 };
 
 /* gred setup */
-struct tc_gred_sopt
-{
+struct tc_gred_sopt {
 	__u32		DPs;
 	__u32		def_DP;
 	__u8		grio;
@@ -267,8 +252,7 @@
 #define TC_HTB_MAXDEPTH		8
 #define TC_HTB_PROTOVER		3 /* the same as HTB and TC's major */
 
-struct tc_htb_opt
-{
+struct tc_htb_opt {
 	struct tc_ratespec 	rate;
 	struct tc_ratespec 	ceil;
 	__u32	buffer;
@@ -277,8 +261,7 @@
 	__u32	level;		/* out only */
 	__u32	prio;
 };
-struct tc_htb_glob
-{
+struct tc_htb_glob {
 	__u32 version;		/* to match HTB/TC */
     	__u32 rate2quantum;	/* bps->quantum divisor */
     	__u32 defcls;		/* default class number */
@@ -287,8 +270,7 @@
 	/* stats */
 	__u32 direct_pkts; /* count of non shapped packets */
 };
-enum
-{
+enum {
 	TCA_HTB_UNSPEC,
 	TCA_HTB_PARMS,
 	TCA_HTB_INIT,
@@ -299,8 +281,7 @@
 
 #define TCA_HTB_MAX (__TCA_HTB_MAX - 1)
 
-struct tc_htb_xstats
-{
+struct tc_htb_xstats {
 	__u32 lends;
 	__u32 borrows;
 	__u32 giants;	/* too big packets (rate will not be accurate) */
@@ -310,28 +291,24 @@
 
 /* HFSC section */
 
-struct tc_hfsc_qopt
-{
+struct tc_hfsc_qopt {
 	__u16	defcls;		/* default class */
 };
 
-struct tc_service_curve
-{
+struct tc_service_curve {
 	__u32	m1;		/* slope of the first segment in bps */
 	__u32	d;		/* x-projection of the first segment in us */
 	__u32	m2;		/* slope of the second segment in bps */
 };
 
-struct tc_hfsc_stats
-{
+struct tc_hfsc_stats {
 	__u64	work;		/* total work done */
 	__u64	rtwork;		/* work done by real-time criteria */
 	__u32	period;		/* current period */
 	__u32	level;		/* class level in hierarchy */
 };
 
-enum
-{
+enum {
 	TCA_HFSC_UNSPEC,
 	TCA_HFSC_RSC,
 	TCA_HFSC_FSC,
@@ -348,8 +325,7 @@
 #define TC_CBQ_MAXLEVEL		8
 #define TC_CBQ_DEF_EWMA		5
 
-struct tc_cbq_lssopt
-{
+struct tc_cbq_lssopt {
 	unsigned char	change;
 	unsigned char	flags;
 #define TCF_CBQ_LSS_BOUNDED	1
@@ -368,8 +344,7 @@
 	__u32		avpkt;
 };
 
-struct tc_cbq_wrropt
-{
+struct tc_cbq_wrropt {
 	unsigned char	flags;
 	unsigned char	priority;
 	unsigned char	cpriority;
@@ -378,8 +353,7 @@
 	__u32		weight;
 };
 
-struct tc_cbq_ovl
-{
+struct tc_cbq_ovl {
 	unsigned char	strategy;
 #define	TC_CBQ_OVL_CLASSIC	0
 #define	TC_CBQ_OVL_DELAY	1
@@ -391,30 +365,26 @@
 	__u32		penalty;
 };
 
-struct tc_cbq_police
-{
+struct tc_cbq_police {
 	unsigned char	police;
 	unsigned char	__res1;
 	unsigned short	__res2;
 };
 
-struct tc_cbq_fopt
-{
+struct tc_cbq_fopt {
 	__u32		split;
 	__u32		defmap;
 	__u32		defchange;
 };
 
-struct tc_cbq_xstats
-{
+struct tc_cbq_xstats {
 	__u32		borrows;
 	__u32		overactions;
 	__s32		avgidle;
 	__s32		undertime;
 };
 
-enum
-{
+enum {
 	TCA_CBQ_UNSPEC,
 	TCA_CBQ_LSSOPT,
 	TCA_CBQ_WRROPT,
@@ -459,8 +429,7 @@
 
 /* Network emulator */
 
-enum
-{
+enum {
 	TCA_NETEM_UNSPEC,
 	TCA_NETEM_CORR,
 	TCA_NETEM_DELAY_DIST,
@@ -471,8 +440,7 @@
 
 #define TCA_NETEM_MAX (__TCA_NETEM_MAX - 1)
 
-struct tc_netem_qopt
-{
+struct tc_netem_qopt {
 	__u32	latency;	/* added delay (us) */
 	__u32   limit;		/* fifo limit (packets) */
 	__u32	loss;		/* random packet loss (0=none ~0=100%) */
@@ -481,21 +449,18 @@
 	__u32	jitter;		/* random jitter in latency (us) */
 };
 
-struct tc_netem_corr
-{
+struct tc_netem_corr {
 	__u32	delay_corr;	/* delay correlation */
 	__u32	loss_corr;	/* packet loss correlation */
 	__u32	dup_corr;	/* duplicate correlation  */
 };
 
-struct tc_netem_reorder
-{
+struct tc_netem_reorder {
 	__u32	probability;
 	__u32	correlation;
 };
 
-struct tc_netem_corrupt
-{
+struct tc_netem_corrupt {
 	__u32	probability;
 	__u32	correlation;
 };
@@ -504,8 +469,7 @@
 
 /* DRR */
 
-enum
-{
+enum {
 	TCA_DRR_UNSPEC,
 	TCA_DRR_QUANTUM,
 	__TCA_DRR_MAX
@@ -513,8 +477,7 @@
 
 #define TCA_DRR_MAX	(__TCA_DRR_MAX - 1)
 
-struct tc_drr_stats
-{
+struct tc_drr_stats {
 	__u32	deficit;
 };
 
diff --git a/include/linux/poll.h b/include/linux/poll.h
index fa287f2..6673743 100644
--- a/include/linux/poll.h
+++ b/include/linux/poll.h
@@ -6,10 +6,10 @@
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
+#include <linux/ktime.h>
 #include <linux/wait.h>
 #include <linux/string.h>
 #include <linux/fs.h>
-#include <linux/sched.h>
 #include <asm/uaccess.h>
 
 /* ~832 bytes of stack space used max in sys_select/sys_poll before allocating
diff --git a/include/linux/ramfs.h b/include/linux/ramfs.h
index 37aaf2b..4e768dd 100644
--- a/include/linux/ramfs.h
+++ b/include/linux/ramfs.h
@@ -17,7 +17,7 @@
 #endif
 
 extern const struct file_operations ramfs_file_operations;
-extern struct vm_operations_struct generic_file_vm_ops;
+extern const struct vm_operations_struct generic_file_vm_ops;
 extern int __init init_rootfs(void);
 
 #endif
diff --git a/include/linux/rds.h b/include/linux/rds.h
index 89d46e1a..cab4994 100644
--- a/include/linux/rds.h
+++ b/include/linux/rds.h
@@ -56,6 +56,7 @@
 /* deprecated: RDS_BARRIER 4 */
 #define RDS_RECVERR			5
 #define RDS_CONG_MONITOR		6
+#define RDS_GET_MR_FOR_DEST		7
 
 /*
  * Control message types for SOL_RDS.
@@ -224,6 +225,13 @@
 	uint64_t	flags;
 };
 
+struct rds_get_mr_for_dest_args {
+	struct sockaddr_storage	dest_addr;
+	struct rds_iovec 	vec;
+	u_int64_t		cookie_addr;
+	uint64_t		flags;
+};
+
 struct rds_free_mr_args {
 	rds_rdma_cookie_t cookie;
 	u_int64_t	flags;
diff --git a/include/linux/res_counter.h b/include/linux/res_counter.h
index 731af71..fcb9884 100644
--- a/include/linux/res_counter.h
+++ b/include/linux/res_counter.h
@@ -114,8 +114,7 @@
 int __must_check res_counter_charge_locked(struct res_counter *counter,
 		unsigned long val);
 int __must_check res_counter_charge(struct res_counter *counter,
-		unsigned long val, struct res_counter **limit_fail_at,
-		struct res_counter **soft_limit_at);
+		unsigned long val, struct res_counter **limit_fail_at);
 
 /*
  * uncharge - tell that some portion of the resource is released
@@ -128,8 +127,7 @@
  */
 
 void res_counter_uncharge_locked(struct res_counter *counter, unsigned long val);
-void res_counter_uncharge(struct res_counter *counter, unsigned long val,
-				bool *was_soft_limit_excess);
+void res_counter_uncharge(struct res_counter *counter, unsigned long val);
 
 static inline bool res_counter_limit_check_locked(struct res_counter *cnt)
 {
diff --git a/include/linux/route.h b/include/linux/route.h
index f7ed35d..6600708 100644
--- a/include/linux/route.h
+++ b/include/linux/route.h
@@ -27,8 +27,7 @@
 #include <linux/compiler.h>
 
 /* This structure gets passed by the SIOCADDRT and SIOCDELRT calls. */
-struct rtentry 
-{
+struct rtentry {
 	unsigned long	rt_pad1;
 	struct sockaddr	rt_dst;		/* target address		*/
 	struct sockaddr	rt_gateway;	/* gateway addr (RTF_GATEWAY)	*/
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index adf2068..14fc906 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -127,8 +127,7 @@
    with attribute type.
  */
 
-struct rtattr
-{
+struct rtattr {
 	unsigned short	rta_len;
 	unsigned short	rta_type;
 };
@@ -154,8 +153,7 @@
  *		Definitions used in routing table administration.
  ****/
 
-struct rtmsg
-{
+struct rtmsg {
 	unsigned char		rtm_family;
 	unsigned char		rtm_dst_len;
 	unsigned char		rtm_src_len;
@@ -171,8 +169,7 @@
 
 /* rtm_type */
 
-enum
-{
+enum {
 	RTN_UNSPEC,
 	RTN_UNICAST,		/* Gateway or direct route	*/
 	RTN_LOCAL,		/* Accept locally		*/
@@ -230,8 +227,7 @@
    could be assigned a value between UNIVERSE and LINK.
 */
 
-enum rt_scope_t
-{
+enum rt_scope_t {
 	RT_SCOPE_UNIVERSE=0,
 /* User defined values  */
 	RT_SCOPE_SITE=200,
@@ -249,8 +245,7 @@
 
 /* Reserved table identifiers */
 
-enum rt_class_t
-{
+enum rt_class_t {
 	RT_TABLE_UNSPEC=0,
 /* User defined values */
 	RT_TABLE_COMPAT=252,
@@ -263,8 +258,7 @@
 
 /* Routing message attributes */
 
-enum rtattr_type_t
-{
+enum rtattr_type_t {
 	RTA_UNSPEC,
 	RTA_DST,
 	RTA_SRC,
@@ -298,8 +292,7 @@
  * and rtt for different paths from multipath.
  */
 
-struct rtnexthop
-{
+struct rtnexthop {
 	unsigned short		rtnh_len;
 	unsigned char		rtnh_flags;
 	unsigned char		rtnh_hops;
@@ -325,8 +318,7 @@
 
 /* RTM_CACHEINFO */
 
-struct rta_cacheinfo
-{
+struct rta_cacheinfo {
 	__u32	rta_clntref;
 	__u32	rta_lastuse;
 	__s32	rta_expires;
@@ -341,8 +333,7 @@
 
 /* RTM_METRICS --- array of struct rtattr with types of RTAX_* */
 
-enum
-{
+enum {
 	RTAX_UNSPEC,
 #define RTAX_UNSPEC RTAX_UNSPEC
 	RTAX_LOCK,
@@ -377,12 +368,13 @@
 #define RTAX_MAX (__RTAX_MAX - 1)
 
 #define RTAX_FEATURE_ECN	0x00000001
-#define RTAX_FEATURE_SACK	0x00000002
-#define RTAX_FEATURE_TIMESTAMP	0x00000004
+#define RTAX_FEATURE_NO_SACK	0x00000002
+#define RTAX_FEATURE_NO_TSTAMP	0x00000004
 #define RTAX_FEATURE_ALLFRAG	0x00000008
+#define RTAX_FEATURE_NO_WSCALE	0x00000010
+#define RTAX_FEATURE_NO_DSACK	0x00000020
 
-struct rta_session
-{
+struct rta_session {
 	__u8	proto;
 	__u8	pad1;
 	__u16	pad2;
@@ -407,8 +399,7 @@
  *		General form of address family dependent message.
  ****/
 
-struct rtgenmsg
-{
+struct rtgenmsg {
 	unsigned char		rtgen_family;
 };
 
@@ -421,8 +412,7 @@
  * on network protocol.
  */
 
-struct ifinfomsg
-{
+struct ifinfomsg {
 	unsigned char	ifi_family;
 	unsigned char	__ifi_pad;
 	unsigned short	ifi_type;		/* ARPHRD_* */
@@ -435,8 +425,7 @@
  *		prefix information 
  ****/
 
-struct prefixmsg
-{
+struct prefixmsg {
 	unsigned char	prefix_family;
 	unsigned char	prefix_pad1;
 	unsigned short	prefix_pad2;
@@ -457,8 +446,7 @@
 
 #define PREFIX_MAX	(__PREFIX_MAX - 1)
 
-struct prefix_cacheinfo
-{
+struct prefix_cacheinfo {
 	__u32	preferred_time;
 	__u32	valid_time;
 };
@@ -468,8 +456,7 @@
  *		Traffic control messages.
  ****/
 
-struct tcmsg
-{
+struct tcmsg {
 	unsigned char	tcm_family;
 	unsigned char	tcm__pad1;
 	unsigned short	tcm__pad2;
@@ -479,8 +466,7 @@
 	__u32		tcm_info;
 };
 
-enum
-{
+enum {
 	TCA_UNSPEC,
 	TCA_KIND,
 	TCA_OPTIONS,
@@ -502,8 +488,7 @@
  *		Neighbor Discovery userland options
  ****/
 
-struct nduseroptmsg
-{
+struct nduseroptmsg {
 	unsigned char	nduseropt_family;
 	unsigned char	nduseropt_pad1;
 	unsigned short	nduseropt_opts_len;	/* Total length of options */
@@ -515,8 +500,7 @@
 	/* Followed by one or more ND options */
 };
 
-enum
-{
+enum {
 	NDUSEROPT_UNSPEC,
 	NDUSEROPT_SRCADDR,
 	__NDUSEROPT_MAX
@@ -598,8 +582,7 @@
 #define RTNLGRP_MAX	(__RTNLGRP_MAX - 1)
 
 /* TC action piece */
-struct tcamsg
-{
+struct tcamsg {
 	unsigned char	tca_family;
 	unsigned char	tca__pad1;
 	unsigned short	tca__pad2;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index fe661af..db532ce 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -176,6 +176,9 @@
 /* Qualcomm MSM SoCs */
 #define PORT_MSM	88
 
+/* BCM63xx family SoCs */
+#define PORT_BCM63XX	89
+
 #ifdef __KERNEL__
 
 #include <linux/compiler.h>
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index bcdd660..63f4742 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -389,8 +389,10 @@
 #ifdef CONFIG_NETWORK_SECMARK
 	__u32			secmark;
 #endif
-
-	__u32			mark;
+	union {
+		__u32		mark;
+		__u32		dropcount;
+	};
 
 	__u16			vlan_tci;
 
@@ -489,8 +491,7 @@
 			int len,int odd, struct sk_buff *skb),
 			void *from, int length);
 
-struct skb_seq_state
-{
+struct skb_seq_state {
 	__u32		lower_offset;
 	__u32		upper_offset;
 	__u32		frag_idx;
@@ -1489,6 +1490,16 @@
 	return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
 }
 
+static inline struct sk_buff *netdev_alloc_skb_ip_align(struct net_device *dev,
+		unsigned int length)
+{
+	struct sk_buff *skb = netdev_alloc_skb(dev, length + NET_IP_ALIGN);
+
+	if (NET_IP_ALIGN && skb)
+		skb_reserve(skb, NET_IP_ALIGN);
+	return skb;
+}
+
 extern struct page *__netdev_alloc_page(struct net_device *dev, gfp_t gfp_mask);
 
 /**
diff --git a/include/linux/smsc911x.h b/include/linux/smsc911x.h
index 5241e4f..7144e8a 100644
--- a/include/linux/smsc911x.h
+++ b/include/linux/smsc911x.h
@@ -30,6 +30,7 @@
 	unsigned int irq_type;
 	unsigned int flags;
 	phy_interface_t phy_interface;
+	unsigned char mac[6];
 };
 
 /* Constants for platform_device irq polarity configuration */
diff --git a/include/linux/socket.h b/include/linux/socket.h
index 3273a0c..7b3aae2 100644
--- a/include/linux/socket.h
+++ b/include/linux/socket.h
@@ -24,6 +24,9 @@
 #include <linux/types.h>		/* pid_t			*/
 #include <linux/compiler.h>		/* __user			*/
 
+#define __sockaddr_check_size(size)	\
+	BUILD_BUG_ON(((size) > sizeof(struct __kernel_sockaddr_storage)))
+
 #ifdef __KERNEL__
 # ifdef CONFIG_PROC_FS
 struct seq_file;
@@ -65,6 +68,12 @@
 	unsigned	msg_flags;
 };
 
+/* For recvmmsg/sendmmsg */
+struct mmsghdr {
+	struct msghdr   msg_hdr;
+	unsigned        msg_len;
+};
+
 /*
  *	POSIX 1003.1g - ancillary data object information
  *	Ancillary data consits of a sequence of pairs of
@@ -312,6 +321,10 @@
 extern int move_addr_to_kernel(void __user *uaddr, int ulen, struct sockaddr *kaddr);
 extern int put_cmsg(struct msghdr*, int level, int type, int len, void *data);
 
+struct timespec;
+
+extern int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+			  unsigned int flags, struct timespec *timeout);
 #endif
 #endif /* not kernel and not glibc */
 #endif /* _LINUX_SOCKET_H */
diff --git a/include/linux/spi/lms283gf05.h b/include/linux/spi/lms283gf05.h
new file mode 100644
index 0000000..555d254
--- /dev/null
+++ b/include/linux/spi/lms283gf05.h
@@ -0,0 +1,28 @@
+/*
+ * lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
+ *
+ * Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+*/
+
+#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
+#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
+
+struct lms283gf05_pdata {
+	unsigned long	reset_gpio;
+	bool		reset_inverted;
+};
+
+#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 3d0a9ff..24f9885 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -269,7 +269,8 @@
 
 	const struct ssb_bus_ops *ops;
 
-	/* The core in the basic address register window. (PCI bus only) */
+	/* The core currently mapped into the MMIO window.
+	 * Not valid on all host-buses. So don't use outside of SSB. */
 	struct ssb_device *mapped_device;
 	union {
 		/* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */
@@ -281,14 +282,17 @@
 	 * On PCMCIA-host busses this is used to protect the whole MMIO access. */
 	spinlock_t bar_lock;
 
-	/* The bus this backplane is running on. */
+	/* The host-bus this backplane is running on. */
 	enum ssb_bustype bustype;
-	/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
-	struct pci_dev *host_pci;
-	/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
-	struct pcmcia_device *host_pcmcia;
-	/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
-	struct sdio_func *host_sdio;
+	/* Pointers to the host-bus. Check bustype before using any of these pointers. */
+	union {
+		/* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */
+		struct pci_dev *host_pci;
+		/* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */
+		struct pcmcia_device *host_pcmcia;
+		/* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */
+		struct sdio_func *host_sdio;
+	};
 
 	/* See enum ssb_quirks */
 	unsigned int quirks;
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index a990ace..714f063 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -25,6 +25,7 @@
 struct list_head;
 struct msgbuf;
 struct msghdr;
+struct mmsghdr;
 struct msqid_ds;
 struct new_utsname;
 struct nfsctl_arg;
@@ -677,6 +678,9 @@
 asmlinkage long sys_recvfrom(int, void __user *, size_t, unsigned,
 				struct sockaddr __user *, int __user *);
 asmlinkage long sys_recvmsg(int fd, struct msghdr __user *msg, unsigned flags);
+asmlinkage long sys_recvmmsg(int fd, struct mmsghdr __user *msg,
+			     unsigned int vlen, unsigned flags,
+			     struct timespec __user *timeout);
 asmlinkage long sys_socket(int, int, int);
 asmlinkage long sys_socketpair(int, int, int, int __user *);
 asmlinkage long sys_socketcall(int call, unsigned long __user *args);
diff --git a/include/linux/tc_act/tc_defact.h b/include/linux/tc_act/tc_defact.h
index 964f473..6f65d07 100644
--- a/include/linux/tc_act/tc_defact.h
+++ b/include/linux/tc_act/tc_defact.h
@@ -3,13 +3,11 @@
 
 #include <linux/pkt_cls.h>
 
-struct tc_defact
-{
+struct tc_defact {
 	tc_gen;
 };
                                                                                 
-enum
-{
+enum {
 	TCA_DEF_UNSPEC,
 	TCA_DEF_TM,
 	TCA_DEF_PARMS,
diff --git a/include/linux/tc_act/tc_gact.h b/include/linux/tc_act/tc_gact.h
index e895c0a..f7bf94e 100644
--- a/include/linux/tc_act/tc_gact.h
+++ b/include/linux/tc_act/tc_gact.h
@@ -5,14 +5,12 @@
 #include <linux/pkt_cls.h>
 
 #define TCA_ACT_GACT 5
-struct tc_gact
-{
+struct tc_gact {
 	tc_gen;
 
 };
 
-struct tc_gact_p
-{
+struct tc_gact_p {
 #define PGACT_NONE              0
 #define PGACT_NETRAND           1
 #define PGACT_DETERM            2
@@ -22,8 +20,7 @@
 	int                   paction;
 };
  
-enum
-{
+enum {
 	TCA_GACT_UNSPEC,
 	TCA_GACT_TM,
 	TCA_GACT_PARMS,
diff --git a/include/linux/tc_act/tc_ipt.h b/include/linux/tc_act/tc_ipt.h
index 4b6f7b6..a233556 100644
--- a/include/linux/tc_act/tc_ipt.h
+++ b/include/linux/tc_act/tc_ipt.h
@@ -5,8 +5,7 @@
 
 #define TCA_ACT_IPT 6
 
-enum
-{
+enum {
 	TCA_IPT_UNSPEC,
 	TCA_IPT_TABLE,
 	TCA_IPT_HOOK,
diff --git a/include/linux/tc_act/tc_mirred.h b/include/linux/tc_act/tc_mirred.h
index 0a99ab6..7561750 100644
--- a/include/linux/tc_act/tc_mirred.h
+++ b/include/linux/tc_act/tc_mirred.h
@@ -10,15 +10,13 @@
 #define TCA_INGRESS_REDIR 3  /* packet redirect to INGRESS*/
 #define TCA_INGRESS_MIRROR 4 /* mirror packet to INGRESS */
                                                                                 
-struct tc_mirred
-{
+struct tc_mirred {
 	tc_gen;
 	int                     eaction;   /* one of IN/EGRESS_MIRROR/REDIR */
 	__u32                   ifindex;  /* ifindex of egress port */
 };
                                                                                 
-enum
-{
+enum {
 	TCA_MIRRED_UNSPEC,
 	TCA_MIRRED_TM,
 	TCA_MIRRED_PARMS,
diff --git a/include/linux/tc_act/tc_nat.h b/include/linux/tc_act/tc_nat.h
index e7cf31e..6663aeb 100644
--- a/include/linux/tc_act/tc_nat.h
+++ b/include/linux/tc_act/tc_nat.h
@@ -6,8 +6,7 @@
 
 #define TCA_ACT_NAT 9
 
-enum
-{
+enum {
 	TCA_NAT_UNSPEC,
 	TCA_NAT_PARMS,
 	TCA_NAT_TM,
@@ -17,8 +16,7 @@
 
 #define TCA_NAT_FLAG_EGRESS 1
 
-struct tc_nat
-{
+struct tc_nat {
 	tc_gen;
 	__be32 old_addr;
 	__be32 new_addr;
diff --git a/include/linux/tc_act/tc_pedit.h b/include/linux/tc_act/tc_pedit.h
index 54ce906..716cfab 100644
--- a/include/linux/tc_act/tc_pedit.h
+++ b/include/linux/tc_act/tc_pedit.h
@@ -6,8 +6,7 @@
 
 #define TCA_ACT_PEDIT 7
 
-enum
-{
+enum {
 	TCA_PEDIT_UNSPEC,
 	TCA_PEDIT_TM,
 	TCA_PEDIT_PARMS,
@@ -15,8 +14,7 @@
 };
 #define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
                                                                                 
-struct tc_pedit_key
-{
+struct tc_pedit_key {
 	__u32           mask;  /* AND */
 	__u32           val;   /*XOR */
 	__u32           off;  /*offset */
@@ -25,8 +23,7 @@
 	__u32           shift;
 };
                                                                                 
-struct tc_pedit_sel
-{
+struct tc_pedit_sel {
 	tc_gen;
 	unsigned char           nkeys;
 	unsigned char           flags;
diff --git a/include/linux/tc_act/tc_skbedit.h b/include/linux/tc_act/tc_skbedit.h
index a14e461..7a2e910 100644
--- a/include/linux/tc_act/tc_skbedit.h
+++ b/include/linux/tc_act/tc_skbedit.h
@@ -26,6 +26,7 @@
 
 #define SKBEDIT_F_PRIORITY		0x1
 #define SKBEDIT_F_QUEUE_MAPPING		0x2
+#define SKBEDIT_F_MARK			0x4
 
 struct tc_skbedit {
 	tc_gen;
@@ -37,6 +38,7 @@
 	TCA_SKBEDIT_PARMS,
 	TCA_SKBEDIT_PRIORITY,
 	TCA_SKBEDIT_QUEUE_MAPPING,
+	TCA_SKBEDIT_MARK,
 	__TCA_SKBEDIT_MAX
 };
 #define TCA_SKBEDIT_MAX (__TCA_SKBEDIT_MAX - 1)
diff --git a/include/linux/tc_ematch/tc_em_cmp.h b/include/linux/tc_ematch/tc_em_cmp.h
index 38e7f7b..f34bb1b 100644
--- a/include/linux/tc_ematch/tc_em_cmp.h
+++ b/include/linux/tc_ematch/tc_em_cmp.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-struct tcf_em_cmp
-{
+struct tcf_em_cmp {
 	__u32		val;
 	__u32		mask;
 	__u16		off;
@@ -15,8 +14,7 @@
 	__u8		opnd:4;
 };
 
-enum
-{
+enum {
 	TCF_EM_ALIGN_U8  = 1,
 	TCF_EM_ALIGN_U16 = 2,
 	TCF_EM_ALIGN_U32 = 4
diff --git a/include/linux/tc_ematch/tc_em_meta.h b/include/linux/tc_ematch/tc_em_meta.h
index dcfb733..0864206 100644
--- a/include/linux/tc_ematch/tc_em_meta.h
+++ b/include/linux/tc_ematch/tc_em_meta.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-enum
-{
+enum {
 	TCA_EM_META_UNSPEC,
 	TCA_EM_META_HDR,
 	TCA_EM_META_LVALUE,
@@ -14,8 +13,7 @@
 };
 #define TCA_EM_META_MAX (__TCA_EM_META_MAX - 1)
 
-struct tcf_meta_val
-{
+struct tcf_meta_val {
 	__u16			kind;
 	__u8			shift;
 	__u8			op;
@@ -26,16 +24,14 @@
 #define TCF_META_ID_MASK	0x7ff
 #define TCF_META_ID(kind)	((kind) & TCF_META_ID_MASK)
 
-enum
-{
+enum {
 	TCF_META_TYPE_VAR,
 	TCF_META_TYPE_INT,
 	__TCF_META_TYPE_MAX
 };
 #define TCF_META_TYPE_MAX (__TCF_META_TYPE_MAX - 1)
 
-enum
-{
+enum {
 	TCF_META_ID_VALUE,
 	TCF_META_ID_RANDOM,
 	TCF_META_ID_LOADAVG_0,
@@ -87,8 +83,7 @@
 };
 #define TCF_META_ID_MAX (__TCF_META_ID_MAX - 1)
 
-struct tcf_meta_hdr
-{
+struct tcf_meta_hdr {
 	struct tcf_meta_val	left;
 	struct tcf_meta_val	right;
 };
diff --git a/include/linux/tc_ematch/tc_em_nbyte.h b/include/linux/tc_ematch/tc_em_nbyte.h
index 9ed8c2e..7172cfb 100644
--- a/include/linux/tc_ematch/tc_em_nbyte.h
+++ b/include/linux/tc_ematch/tc_em_nbyte.h
@@ -4,8 +4,7 @@
 #include <linux/types.h>
 #include <linux/pkt_cls.h>
 
-struct tcf_em_nbyte
-{
+struct tcf_em_nbyte {
 	__u16		off;
 	__u16		len:12;
 	__u8		layer:4;
diff --git a/include/linux/tc_ematch/tc_em_text.h b/include/linux/tc_ematch/tc_em_text.h
index d12a73a..5aac404 100644
--- a/include/linux/tc_ematch/tc_em_text.h
+++ b/include/linux/tc_ematch/tc_em_text.h
@@ -6,8 +6,7 @@
 
 #define TC_EM_TEXT_ALGOSIZ	16
 
-struct tcf_em_text
-{
+struct tcf_em_text {
 	char		algo[TC_EM_TEXT_ALGOSIZ];
 	__u16		from_offset;
 	__u16		to_offset;
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index 61723a7..eeecb85 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -102,8 +102,7 @@
 #define TCPI_OPT_WSCALE		4
 #define TCPI_OPT_ECN		8
 
-enum tcp_ca_state
-{
+enum tcp_ca_state {
 	TCP_CA_Open = 0,
 #define TCPF_CA_Open	(1<<TCP_CA_Open)
 	TCP_CA_Disorder = 1,
@@ -116,8 +115,7 @@
 #define TCPF_CA_Loss	(1<<TCP_CA_Loss)
 };
 
-struct tcp_info
-{
+struct tcp_info {
 	__u8	tcpi_state;
 	__u8	tcpi_ca_state;
 	__u8	tcpi_retransmits;
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index 660a9de..2aac8a8 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -36,7 +36,7 @@
 #ifndef DECLARE_TRACE
 
 #define TP_PROTO(args...)	args
-#define TP_ARGS(args...)		args
+#define TP_ARGS(args...)	args
 
 #ifdef CONFIG_TRACEPOINTS
 
diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h
index 3566129..b086779 100644
--- a/include/linux/tty_driver.h
+++ b/include/linux/tty_driver.h
@@ -45,8 +45,16 @@
  *
  * void (*shutdown)(struct tty_struct * tty);
  *
- * 	This routine is called when a particular tty device is closed for
- *	the last time freeing up the resources.
+ * 	This routine is called synchronously when a particular tty device
+ *	is closed for the last time freeing up the resources.
+ *
+ *
+ * void (*cleanup)(struct tty_struct * tty);
+ *
+ *	This routine is called asynchronously when a particular tty device
+ *	is closed for the last time freeing up the resources. This is
+ *	actually the second part of shutdown for routines that might sleep.
+ *
  *
  * int (*write)(struct tty_struct * tty,
  * 		 const unsigned char *buf, int count);
@@ -233,6 +241,7 @@
 	int  (*open)(struct tty_struct * tty, struct file * filp);
 	void (*close)(struct tty_struct * tty, struct file * filp);
 	void (*shutdown)(struct tty_struct *tty);
+	void (*cleanup)(struct tty_struct *tty);
 	int  (*write)(struct tty_struct * tty,
 		      const unsigned char *buf, int count);
 	int  (*put_char)(struct tty_struct *tty, unsigned char ch);
diff --git a/include/linux/udp.h b/include/linux/udp.h
index 0cf5c4c..832361e 100644
--- a/include/linux/udp.h
+++ b/include/linux/udp.h
@@ -45,11 +45,11 @@
 	return (struct udphdr *)skb_transport_header(skb);
 }
 
-#define UDP_HTABLE_SIZE		128
+#define UDP_HTABLE_SIZE_MIN		(CONFIG_BASE_SMALL ? 128 : 256)
 
-static inline int udp_hashfn(struct net *net, const unsigned num)
+static inline int udp_hashfn(struct net *net, unsigned num, unsigned mask)
 {
-	return (num + net_hash_mix(net)) & (UDP_HTABLE_SIZE - 1);
+	return (num + net_hash_mix(net)) & mask;
 }
 
 struct udp_sock {
diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h
index f814730..86c31b7 100644
--- a/include/linux/usb/usbnet.h
+++ b/include/linux/usb/usbnet.h
@@ -90,6 +90,7 @@
 #define FLAG_WLAN	0x0080		/* use "wlan%d" names */
 #define FLAG_AVOID_UNLINK_URBS 0x0100	/* don't unlink urbs at usbnet_stop() */
 #define FLAG_SEND_ZLP	0x0200		/* hw requires ZLPs are sent */
+#define FLAG_WWAN	0x0400		/* use "wwan%d" names */
 
 
 	/* init device ... can sleep, or cause probe() failure */
diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h
index 2d4ec15..3246f0e 100644
--- a/include/linux/xfrm.h
+++ b/include/linux/xfrm.h
@@ -10,8 +10,7 @@
 /* Structure to encapsulate addresses. I do not want to use
  * "standard" structure. My apologies.
  */
-typedef union
-{
+typedef union {
 	__be32		a4;
 	__be32		a6[4];
 } xfrm_address_t;
@@ -20,8 +19,7 @@
  * the state by (spi,daddr,ah/esp) or to store information about
  * spi, protocol and tunnel address on output.
  */
-struct xfrm_id
-{
+struct xfrm_id {
 	xfrm_address_t	daddr;
 	__be32		spi;
 	__u8		proto;
@@ -45,8 +43,7 @@
 
 /* Selector, used as selector both on policy rules (SPD) and SAs. */
 
-struct xfrm_selector
-{
+struct xfrm_selector {
 	xfrm_address_t	daddr;
 	xfrm_address_t	saddr;
 	__be16	dport;
@@ -63,8 +60,7 @@
 
 #define XFRM_INF (~(__u64)0)
 
-struct xfrm_lifetime_cfg
-{
+struct xfrm_lifetime_cfg {
 	__u64	soft_byte_limit;
 	__u64	hard_byte_limit;
 	__u64	soft_packet_limit;
@@ -75,16 +71,14 @@
 	__u64	hard_use_expires_seconds;
 };
 
-struct xfrm_lifetime_cur
-{
+struct xfrm_lifetime_cur {
 	__u64	bytes;
 	__u64	packets;
 	__u64	add_time;
 	__u64	use_time;
 };
 
-struct xfrm_replay_state
-{
+struct xfrm_replay_state {
 	__u32	oseq;
 	__u32	seq;
 	__u32	bitmap;
@@ -109,16 +103,14 @@
 	__u32	integrity_failed;
 };
 
-enum
-{
+enum {
 	XFRM_POLICY_TYPE_MAIN	= 0,
 	XFRM_POLICY_TYPE_SUB	= 1,
 	XFRM_POLICY_TYPE_MAX	= 2,
 	XFRM_POLICY_TYPE_ANY	= 255
 };
 
-enum
-{
+enum {
 	XFRM_POLICY_IN	= 0,
 	XFRM_POLICY_OUT	= 1,
 	XFRM_POLICY_FWD	= 2,
@@ -126,8 +118,7 @@
 	XFRM_POLICY_MAX	= 3
 };
 
-enum
-{
+enum {
 	XFRM_SHARE_ANY,		/* No limitations */
 	XFRM_SHARE_SESSION,	/* For this session only */
 	XFRM_SHARE_USER,	/* For this user only */
diff --git a/include/net/ah.h b/include/net/ah.h
index ae1c322..f0129f7 100644
--- a/include/net/ah.h
+++ b/include/net/ah.h
@@ -1,43 +1,20 @@
 #ifndef _NET_AH_H
 #define _NET_AH_H
 
-#include <linux/crypto.h>
-#include <net/xfrm.h>
+#include <linux/skbuff.h>
 
 /* This is the maximum truncated ICV length that we know of. */
 #define MAX_AH_AUTH_LEN	12
 
-struct ah_data
-{
-	u8			*work_icv;
+struct crypto_ahash;
+
+struct ah_data {
 	int			icv_full_len;
 	int			icv_trunc_len;
 
-	struct crypto_hash	*tfm;
+	struct crypto_ahash	*ahash;
 };
 
-static inline int ah_mac_digest(struct ah_data *ahp, struct sk_buff *skb,
-				u8 *auth_data)
-{
-	struct hash_desc desc;
-	int err;
-
-	desc.tfm = ahp->tfm;
-	desc.flags = 0;
-
-	memset(auth_data, 0, ahp->icv_trunc_len);
-	err = crypto_hash_init(&desc);
-	if (unlikely(err))
-		goto out;
-	err = skb_icv_walk(skb, &desc, 0, skb->len, crypto_hash_update);
-	if (unlikely(err))
-		goto out;
-	err = crypto_hash_final(&desc, ahp->work_icv);
-
-out:
-	return err;
-}
-
 struct ip_auth_hdr;
 
 static inline struct ip_auth_hdr *ip_auth_hdr(const struct sk_buff *skb)
diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h
index 718394e..04a6908 100644
--- a/include/net/bluetooth/bluetooth.h
+++ b/include/net/bluetooth/bluetooth.h
@@ -121,7 +121,7 @@
 	rwlock_t          lock;
 };
 
-int  bt_sock_register(int proto, struct net_proto_family *ops);
+int  bt_sock_register(int proto, const struct net_proto_family *ops);
 int  bt_sock_unregister(int proto);
 void bt_sock_link(struct bt_sock_list *l, struct sock *s);
 void bt_sock_unlink(struct bt_sock_list *l, struct sock *s);
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 3d874c6..ff67865 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1142,6 +1142,9 @@
 	u32 frag_threshold;
 	u32 rts_threshold;
 
+	char fw_version[ETHTOOL_BUSINFO_LEN];
+	u32 hw_version;
+
 	/* If multiple wiphys are registered and you're handed e.g.
 	 * a regular netdev with assigned ieee80211_ptr, you won't
 	 * know whether it points to a wiphy your driver has registered
@@ -1171,6 +1174,10 @@
 	struct net *_net;
 #endif
 
+#ifdef CONFIG_CFG80211_WEXT
+	const struct iw_handler_def *wext;
+#endif
+
 	char priv[0] __attribute__((__aligned__(NETDEV_ALIGN)));
 };
 
@@ -1345,7 +1352,7 @@
 	struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES];
 	struct cfg80211_internal_bss *current_bss; /* associated / joined */
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
 		struct cfg80211_ibss_params ibss;
@@ -1802,30 +1809,45 @@
  * @dev: network device
  * @buf: deauthentication frame (header + body)
  * @len: length of the frame data
- * @cookie: cookie from ->deauth if called within that callback,
- *	%NULL otherwise
  *
  * This function is called whenever deauthentication has been processed in
  * station mode. This includes both received deauthentication frames and
  * locally generated ones. This function may sleep.
  */
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
-			  void *cookie);
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_deauth - notification of processed deauthentication
+ * @dev: network device
+ * @buf: deauthentication frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_deauth(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len);
 
 /**
  * cfg80211_send_disassoc - notification of processed disassociation
  * @dev: network device
  * @buf: disassociation response frame (header + body)
  * @len: length of the frame data
- * @cookie: cookie from ->disassoc if called within that callback,
- *	%NULL otherwise
  *
  * This function is called whenever disassociation has been processed in
  * station mode. This includes both received disassociation frames and locally
  * generated ones. This function may sleep.
  */
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
-			    void *cookie);
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len);
+
+/**
+ * __cfg80211_send_disassoc - notification of processed disassociation
+ * @dev: network device
+ * @buf: disassociation response frame (header + body)
+ * @len: length of the frame data
+ *
+ * Like cfg80211_send_disassoc(), but doesn't take the wdev lock.
+ */
+void __cfg80211_send_disassoc(struct net_device *dev, const u8 *buf,
+	size_t len);
 
 /**
  * cfg80211_michael_mic_failure - notification of Michael MIC failure (TKIP)
diff --git a/include/net/compat.h b/include/net/compat.h
index 7c30028..3c7d4e3 100644
--- a/include/net/compat.h
+++ b/include/net/compat.h
@@ -18,6 +18,11 @@
 	compat_uint_t	msg_flags;
 };
 
+struct compat_mmsghdr {
+	struct compat_msghdr msg_hdr;
+	compat_uint_t        msg_len;
+};
+
 struct compat_cmsghdr {
 	compat_size_t	cmsg_len;
 	compat_int_t	cmsg_level;
@@ -28,13 +33,20 @@
 extern int compat_sock_get_timestampns(struct sock *, struct timespec __user *);
 
 #else /* defined(CONFIG_COMPAT) */
-#define compat_msghdr	msghdr		/* to avoid compiler warnings */
+/*
+ * To avoid compiler warnings:
+ */
+#define compat_msghdr	msghdr
+#define compat_mmsghdr	mmsghdr
 #endif /* defined(CONFIG_COMPAT) */
 
 extern int get_compat_msghdr(struct msghdr *, struct compat_msghdr __user *);
 extern int verify_compat_iovec(struct msghdr *, struct iovec *, struct sockaddr *, int);
 extern asmlinkage long compat_sys_sendmsg(int,struct compat_msghdr __user *,unsigned);
 extern asmlinkage long compat_sys_recvmsg(int,struct compat_msghdr __user *,unsigned);
+extern asmlinkage long compat_sys_recvmmsg(int, struct compat_mmsghdr __user *,
+					   unsigned, unsigned,
+					   struct timespec __user *);
 extern asmlinkage long compat_sys_getsockopt(int, int, int, char __user *, int __user *);
 extern int put_cmsg_compat(struct msghdr*, int, int, int, void *);
 
diff --git a/include/net/dn_dev.h b/include/net/dn_dev.h
index cee4682..28966ca 100644
--- a/include/net/dn_dev.h
+++ b/include/net/dn_dev.h
@@ -97,16 +97,14 @@
 	unsigned long uptime;     /* Time device went up in jiffies */
 };
 
-struct dn_short_packet
-{
+struct dn_short_packet {
 	__u8    msgflg;
 	__le16 dstnode;
 	__le16 srcnode;
 	__u8   forward;
 } __attribute__((packed));
 
-struct dn_long_packet
-{
+struct dn_long_packet {
 	__u8   msgflg;
 	__u8   d_area;
 	__u8   d_subarea;
@@ -122,8 +120,7 @@
 
 /*------------------------- DRP - Routing messages ---------------------*/
 
-struct endnode_hello_message
-{
+struct endnode_hello_message {
 	__u8   msgflg;
 	__u8   tiver[3];
 	__u8   id[6];
@@ -138,8 +135,7 @@
 	__u8   data[2];
 } __attribute__((packed));
 
-struct rtnode_hello_message
-{
+struct rtnode_hello_message {
 	__u8   msgflg;
 	__u8   tiver[3];
 	__u8   id[6];
diff --git a/include/net/dn_fib.h b/include/net/dn_fib.h
index c378be7..52da6c3 100644
--- a/include/net/dn_fib.h
+++ b/include/net/dn_fib.h
@@ -4,8 +4,7 @@
 /* WARNING: The ordering of these elements must match ordering
  *          of RTA_* rtnetlink attribute numbers.
  */
-struct dn_kern_rta
-{
+struct dn_kern_rta {
         void            *rta_dst;
         void            *rta_src;
         int             *rta_iif;
diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h
index 96e816b..17d43d2 100644
--- a/include/net/dn_nsp.h
+++ b/include/net/dn_nsp.h
@@ -70,30 +70,26 @@
 
 /* Data Messages    (data segment/interrupt/link service)               */
 
-struct nsp_data_seg_msg
-{
+struct nsp_data_seg_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
 } __attribute__((packed));
 
-struct nsp_data_opt_msg
-{
+struct nsp_data_opt_msg {
 	__le16 acknum;
 	__le16 segnum;
 	__le16 lsflgs;
 } __attribute__((packed));
 
-struct nsp_data_opt_msg1
-{
+struct nsp_data_opt_msg1 {
 	__le16 acknum;
 	__le16 segnum;
 } __attribute__((packed));
 
 
 /* Acknowledgment Message (data/other data)                             */
-struct nsp_data_ack_msg
-{
+struct nsp_data_ack_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
@@ -101,16 +97,14 @@
 } __attribute__((packed));
 
 /* Connect Acknowledgment Message */
-struct  nsp_conn_ack_msg
-{
+struct  nsp_conn_ack_msg {
 	__u8 msgflg;
 	__le16 dstaddr;
 } __attribute__((packed));
 
 
 /* Connect Initiate/Retransmit Initiate/Connect Confirm */
-struct  nsp_conn_init_msg
-{
+struct  nsp_conn_init_msg {
 	__u8   msgflg;
 #define NSP_CI      0x18            /* Connect Initiate     */
 #define NSP_RCI     0x68            /* Retrans. Conn Init   */
@@ -126,8 +120,7 @@
 } __attribute__((packed));
 
 /* Disconnect Initiate/Disconnect Confirm */
-struct  nsp_disconn_init_msg
-{
+struct  nsp_disconn_init_msg {
 	__u8   msgflg;
 	__le16 dstaddr;
 	__le16 srcaddr;
@@ -136,8 +129,7 @@
 
 
 
-struct  srcobj_fmt
-{
+struct  srcobj_fmt {
 	__u8   format;
 	__u8   task;
 	__le16 grpcode;
diff --git a/include/net/dst.h b/include/net/dst.h
index 5a900dd..387cb3c 100644
--- a/include/net/dst.h
+++ b/include/net/dst.h
@@ -36,8 +36,7 @@
 
 struct sk_buff;
 
-struct dst_entry
-{
+struct dst_entry {
 	struct rcu_head		rcu_head;
 	struct dst_entry	*child;
 	struct net_device       *dev;
@@ -111,6 +110,12 @@
 	return dst->metrics[metric-1];
 }
 
+static inline u32
+dst_feature(const struct dst_entry *dst, u32 feature)
+{
+	return (dst ? dst_metric(dst, RTAX_FEATURES) & feature : 0);
+}
+
 static inline u32 dst_mtu(const struct dst_entry *dst)
 {
 	u32 mtu = dst_metric(dst, RTAX_MTU);
@@ -136,7 +141,7 @@
 static inline u32
 dst_allfrag(const struct dst_entry *dst)
 {
-	int ret = dst_metric(dst, RTAX_FEATURES) & RTAX_FEATURE_ALLFRAG;
+	int ret = dst_feature(dst,  RTAX_FEATURE_ALLFRAG);
 	/* Yes, _exactly_. This is paranoia. */
 	barrier();
 	return ret;
@@ -222,11 +227,19 @@
 		neigh_confirm(dst->neighbour);
 }
 
-static inline void dst_negative_advice(struct dst_entry **dst_p)
+static inline void dst_negative_advice(struct dst_entry **dst_p,
+				       struct sock *sk)
 {
 	struct dst_entry * dst = *dst_p;
-	if (dst && dst->ops->negative_advice)
+	if (dst && dst->ops->negative_advice) {
 		*dst_p = dst->ops->negative_advice(dst);
+
+		if (dst != *dst_p) {
+			extern void sk_reset_txq(struct sock *sk);
+
+			sk_reset_txq(sk);
+		}
+	}
 }
 
 static inline void dst_link_failure(struct sk_buff *skb)
diff --git a/include/net/fib_rules.h b/include/net/fib_rules.h
index ca4b2e8..2cd707b 100644
--- a/include/net/fib_rules.h
+++ b/include/net/fib_rules.h
@@ -7,8 +7,7 @@
 #include <net/flow.h>
 #include <net/rtnetlink.h>
 
-struct fib_rule
-{
+struct fib_rule {
 	struct list_head	list;
 	atomic_t		refcnt;
 	int			ifindex;
@@ -25,15 +24,13 @@
 	struct net *		fr_net;
 };
 
-struct fib_lookup_arg
-{
+struct fib_lookup_arg {
 	void			*lookup_ptr;
 	void			*result;
 	struct fib_rule		*rule;
 };
 
-struct fib_rules_ops
-{
+struct fib_rules_ops {
 	int			family;
 	struct list_head	list;
 	int			rule_size;
diff --git a/include/net/gen_stats.h b/include/net/gen_stats.h
index c148855..fa15771 100644
--- a/include/net/gen_stats.h
+++ b/include/net/gen_stats.h
@@ -6,8 +6,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/pkt_sched.h>
 
-struct gnet_dump
-{
+struct gnet_dump {
 	spinlock_t *      lock;
 	struct sk_buff *  skb;
 	struct nlattr *   tail;
@@ -30,6 +29,7 @@
 extern int gnet_stats_copy_basic(struct gnet_dump *d,
 				 struct gnet_stats_basic_packed *b);
 extern int gnet_stats_copy_rate_est(struct gnet_dump *d,
+				    const struct gnet_stats_basic_packed *b,
 				    struct gnet_stats_rate_est *r);
 extern int gnet_stats_copy_queue(struct gnet_dump *d,
 				 struct gnet_stats_queue *q);
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index 2a1c0687..eb551ba 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -13,8 +13,7 @@
  * @list: list entry for linking
  * @family: pointer to family, need not be set before registering
  */
-struct genl_multicast_group
-{
+struct genl_multicast_group {
 	struct genl_family	*family;	/* private */
 	struct list_head	list;		/* private */
 	char			name[GENL_NAMSIZ];
@@ -35,8 +34,7 @@
  * @family_list: family list
  * @mcast_groups: multicast groups list
  */
-struct genl_family
-{
+struct genl_family {
 	unsigned int		id;
 	unsigned int		hdrsize;
 	char			name[GENL_NAMSIZ];
@@ -58,8 +56,7 @@
  * @userhdr: user specific header
  * @attrs: netlink attributes
  */
-struct genl_info
-{
+struct genl_info {
 	u32			snd_seq;
 	u32			snd_pid;
 	struct nlmsghdr *	nlhdr;
@@ -102,8 +99,7 @@
  * @done: completion callback for dumps
  * @ops_list: operations list
  */
-struct genl_ops
-{
+struct genl_ops {
 	u8			cmd;
 	unsigned int		flags;
 	const struct nla_policy	*policy;
diff --git a/include/net/if_inet6.h b/include/net/if_inet6.h
index 38b7813..e9d69d1 100644
--- a/include/net/if_inet6.h
+++ b/include/net/if_inet6.h
@@ -32,8 +32,7 @@
 
 #ifdef __KERNEL__
 
-struct inet6_ifaddr 
-{
+struct inet6_ifaddr {
 	struct in6_addr		addr;
 	__u32			prefix_len;
 	
@@ -67,8 +66,7 @@
 	int			dead;
 };
 
-struct ip6_sf_socklist
-{
+struct ip6_sf_socklist {
 	unsigned int		sl_max;
 	unsigned int		sl_count;
 	struct in6_addr		sl_addr[0];
@@ -79,8 +77,7 @@
 
 #define IP6_SFBLOCK	10	/* allocate this many at once */
 
-struct ipv6_mc_socklist
-{
+struct ipv6_mc_socklist {
 	struct in6_addr		addr;
 	int			ifindex;
 	struct ipv6_mc_socklist *next;
@@ -89,8 +86,7 @@
 	struct ip6_sf_socklist	*sflist;
 };
 
-struct ip6_sf_list
-{
+struct ip6_sf_list {
 	struct ip6_sf_list	*sf_next;
 	struct in6_addr		sf_addr;
 	unsigned long		sf_count[2];	/* include/exclude counts */
@@ -105,8 +101,7 @@
 #define MAF_NOREPORT		0x08
 #define MAF_GSQUERY		0x10
 
-struct ifmcaddr6
-{
+struct ifmcaddr6 {
 	struct in6_addr		mca_addr;
 	struct inet6_dev	*idev;
 	struct ifmcaddr6	*next;
@@ -126,15 +121,13 @@
 
 /* Anycast stuff */
 
-struct ipv6_ac_socklist
-{
+struct ipv6_ac_socklist {
 	struct in6_addr		acl_addr;
 	int			acl_ifindex;
 	struct ipv6_ac_socklist *acl_next;
 };
 
-struct ifacaddr6
-{
+struct ifacaddr6 {
 	struct in6_addr		aca_addr;
 	struct inet6_dev	*aca_idev;
 	struct rt6_info		*aca_rt;
@@ -157,8 +150,7 @@
 	DEFINE_SNMP_STAT(struct icmpv6msg_mib, icmpv6msg);
 };
 
-struct inet6_dev 
-{
+struct inet6_dev {
 	struct net_device		*dev;
 
 	struct inet6_ifaddr	*addr_list;
diff --git a/include/net/inet6_hashtables.h b/include/net/inet6_hashtables.h
index 22c73a7..92838d3 100644
--- a/include/net/inet6_hashtables.h
+++ b/include/net/inet6_hashtables.h
@@ -46,8 +46,8 @@
 	const struct ipv6_pinfo *np = inet6_sk(sk);
 	const struct in6_addr *laddr = &np->rcv_saddr;
 	const struct in6_addr *faddr = &np->daddr;
-	const __u16 lport = inet->num;
-	const __be16 fport = inet->dport;
+	const __u16 lport = inet->inet_num;
+	const __be16 fport = inet->inet_dport;
 	struct net *net = sock_net(sk);
 
 	return inet6_ehashfn(net, laddr, lport, faddr, fport);
diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h
index d522dcf..5b698b3 100644
--- a/include/net/inet_hashtables.h
+++ b/include/net/inet_hashtables.h
@@ -125,7 +125,7 @@
 	 */
 	struct inet_ehash_bucket	*ehash;
 	spinlock_t			*ehash_locks;
-	unsigned int			ehash_size;
+	unsigned int			ehash_mask;
 	unsigned int			ehash_locks_mask;
 
 	/* Ok, let's try this, I give up, we do need a local binding
@@ -158,7 +158,7 @@
 	struct inet_hashinfo *hashinfo,
 	unsigned int hash)
 {
-	return &hashinfo->ehash[hash & (hashinfo->ehash_size - 1)];
+	return &hashinfo->ehash[hash & hashinfo->ehash_mask];
 }
 
 static inline spinlock_t *inet_ehash_lockp(
@@ -241,7 +241,7 @@
 
 static inline int inet_sk_listen_hashfn(const struct sock *sk)
 {
-	return inet_lhashfn(sock_net(sk), inet_sk(sk)->num);
+	return inet_lhashfn(sock_net(sk), inet_sk(sk)->inet_num);
 }
 
 /* Caller must disable local BH processing. */
@@ -301,8 +301,8 @@
 #endif /* __BIG_ENDIAN */
 #define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
-	 ((*((__addrpair *)&(inet_sk(__sk)->daddr))) == (__cookie))	&&	\
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))	&&	\
+	 ((*((__addrpair *)&(inet_sk(__sk)->inet_daddr))) == (__cookie))  &&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))   &&	\
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 #define INET_TW_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net)) &&	\
@@ -313,9 +313,9 @@
 #define INET_ADDR_COOKIE(__name, __saddr, __daddr)
 #define INET_MATCH(__sk, __net, __hash, __cookie, __saddr, __daddr, __ports, __dif)	\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
-	 (inet_sk(__sk)->daddr		== (__saddr))		&&	\
-	 (inet_sk(__sk)->rcv_saddr	== (__daddr))		&&	\
-	 ((*((__portpair *)&(inet_sk(__sk)->dport))) == (__ports))	&&	\
+	 (inet_sk(__sk)->inet_daddr	== (__saddr))		&&	\
+	 (inet_sk(__sk)->inet_rcv_saddr	== (__daddr))		&&	\
+	 ((*((__portpair *)&(inet_sk(__sk)->inet_dport))) == (__ports))	&&	\
 	 (!((__sk)->sk_bound_dev_if) || ((__sk)->sk_bound_dev_if == (__dif))))
 #define INET_TW_MATCH(__sk, __net, __hash,__cookie, __saddr, __daddr, __ports, __dif)	\
 	(((__sk)->sk_hash == (__hash)) && net_eq(sock_net(__sk), (__net))	&&	\
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index 47004f3..bd4c53f 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -93,14 +93,14 @@
  *
  * @sk - ancestor class
  * @pinet6 - pointer to IPv6 control block
- * @daddr - Foreign IPv4 addr
- * @rcv_saddr - Bound local IPv4 addr
- * @dport - Destination port
- * @num - Local port
- * @saddr - Sending source
+ * @inet_daddr - Foreign IPv4 addr
+ * @inet_rcv_saddr - Bound local IPv4 addr
+ * @inet_dport - Destination port
+ * @inet_num - Local port
+ * @inet_saddr - Sending source
  * @uc_ttl - Unicast TTL
- * @sport - Source port
- * @id - ID counter for DF pkts
+ * @inet_sport - Source port
+ * @inet_id - ID counter for DF pkts
  * @tos - TOS
  * @mc_ttl - Multicasting TTL
  * @is_icsk - is this an inet_connection_sock?
@@ -115,16 +115,16 @@
 	struct ipv6_pinfo	*pinet6;
 #endif
 	/* Socket demultiplex comparisons on incoming packets. */
-	__be32			daddr;
-	__be32			rcv_saddr;
-	__be16			dport;
-	__u16			num;
-	__be32			saddr;
+	__be32			inet_daddr;
+	__be32			inet_rcv_saddr;
+	__be16			inet_dport;
+	__u16			inet_num;
+	__be32			inet_saddr;
 	__s16			uc_ttl;
 	__u16			cmsg_flags;
 	struct ip_options	*opt;
-	__be16			sport;
-	__u16			id;
+	__be16			inet_sport;
+	__u16			inet_id;
 	__u8			tos;
 	__u8			mc_ttl;
 	__u8			pmtudisc;
@@ -190,10 +190,10 @@
 static inline int inet_sk_ehashfn(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	const __be32 laddr = inet->rcv_saddr;
-	const __u16 lport = inet->num;
-	const __be32 faddr = inet->daddr;
-	const __be16 fport = inet->dport;
+	const __be32 laddr = inet->inet_rcv_saddr;
+	const __u16 lport = inet->inet_num;
+	const __be32 faddr = inet->inet_daddr;
+	const __be16 fport = inet->inet_dport;
 	struct net *net = sock_net(sk);
 
 	return inet_ehashfn(net, laddr, lport, faddr, fport);
diff --git a/include/net/inet_timewait_sock.h b/include/net/inet_timewait_sock.h
index f93ad90..773b10f 100644
--- a/include/net/inet_timewait_sock.h
+++ b/include/net/inet_timewait_sock.h
@@ -194,7 +194,7 @@
 static inline __be32 inet_rcv_saddr(const struct sock *sk)
 {
 	return likely(sk->sk_state != TCP_TIME_WAIT) ?
-		inet_sk(sk)->rcv_saddr : inet_twsk(sk)->tw_rcv_saddr;
+		inet_sk(sk)->inet_rcv_saddr : inet_twsk(sk)->tw_rcv_saddr;
 }
 
 extern void inet_twsk_put(struct inet_timewait_sock *tw);
diff --git a/include/net/inetpeer.h b/include/net/inetpeer.h
index 15e1f8fe..35ad7b9 100644
--- a/include/net/inetpeer.h
+++ b/include/net/inetpeer.h
@@ -13,8 +13,7 @@
 #include <linux/spinlock.h>
 #include <asm/atomic.h>
 
-struct inet_peer
-{
+struct inet_peer {
 	/* group together avl_left,avl_right,v4daddr to speedup lookups */
 	struct inet_peer	*avl_left, *avl_right;
 	__be32			v4daddr;	/* peer's address */
diff --git a/include/net/ip.h b/include/net/ip.h
index 2f47e54..e6b9d12 100644
--- a/include/net/ip.h
+++ b/include/net/ip.h
@@ -33,8 +33,7 @@
 
 struct sock;
 
-struct inet_skb_parm
-{
+struct inet_skb_parm {
 	struct ip_options	opt;		/* Compiled IP options		*/
 	unsigned char		flags;
 
@@ -50,8 +49,7 @@
 	return ip_hdr(skb)->ihl * 4;
 }
 
-struct ipcm_cookie
-{
+struct ipcm_cookie {
 	__be32			addr;
 	int			oif;
 	struct ip_options	*opt;
@@ -60,8 +58,7 @@
 
 #define IPCB(skb) ((struct inet_skb_parm*)((skb)->cb))
 
-struct ip_ra_chain
-{
+struct ip_ra_chain {
 	struct ip_ra_chain	*next;
 	struct sock		*sk;
 	void			(*destructor)(struct sock *);
@@ -159,8 +156,7 @@
 void ip_send_reply(struct sock *sk, struct sk_buff *skb, struct ip_reply_arg *arg,
 		   unsigned int len); 
 
-struct ipv4_config
-{
+struct ipv4_config {
 	int	log_martians;
 	int	no_pmtu_disc;
 };
@@ -240,8 +236,8 @@
 		 * does not change, they drop every other packet in
 		 * a TCP stream using header compression.
 		 */
-		iph->id = (sk && inet_sk(sk)->daddr) ?
-					htons(inet_sk(sk)->id++) : 0;
+		iph->id = (sk && inet_sk(sk)->inet_daddr) ?
+					htons(inet_sk(sk)->inet_id++) : 0;
 	} else
 		__ip_select_ident(iph, dst, 0);
 }
@@ -249,9 +245,9 @@
 static inline void ip_select_ident_more(struct iphdr *iph, struct dst_entry *dst, struct sock *sk, int more)
 {
 	if (iph->frag_off & htons(IP_DF)) {
-		if (sk && inet_sk(sk)->daddr) {
-			iph->id = htons(inet_sk(sk)->id);
-			inet_sk(sk)->id += 1 + more;
+		if (sk && inet_sk(sk)->inet_daddr) {
+			iph->id = htons(inet_sk(sk)->inet_id);
+			inet_sk(sk)->inet_id += 1 + more;
 		} else
 			iph->id = 0;
 	} else
@@ -317,7 +313,7 @@
 
 static __inline__ void inet_reset_saddr(struct sock *sk)
 {
-	inet_sk(sk)->rcv_saddr = inet_sk(sk)->saddr = 0;
+	inet_sk(sk)->inet_rcv_saddr = inet_sk(sk)->inet_saddr = 0;
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 	if (sk->sk_family == PF_INET6) {
 		struct ipv6_pinfo *np = inet6_sk(sk);
@@ -336,8 +332,7 @@
  *	Functions provided by ip_fragment.c
  */
 
-enum ip_defrag_users
-{
+enum ip_defrag_users {
 	IP_DEFRAG_LOCAL_DELIVER,
 	IP_DEFRAG_CALL_RA_CHAIN,
 	IP_DEFRAG_CONNTRACK_IN,
diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h
index 15b492a..2578081 100644
--- a/include/net/ip6_fib.h
+++ b/include/net/ip6_fib.h
@@ -30,8 +30,7 @@
 
 struct rt6_info;
 
-struct fib6_config
-{
+struct fib6_config {
 	u32		fc_table;
 	u32		fc_metric;
 	int		fc_dst_len;
@@ -51,8 +50,7 @@
 	struct nl_info	fc_nlinfo;
 };
 
-struct fib6_node
-{
+struct fib6_node {
 	struct fib6_node	*parent;
 	struct fib6_node	*left;
 	struct fib6_node	*right;
@@ -78,16 +76,14 @@
  *
  */
 
-struct rt6key
-{
+struct rt6key {
 	struct in6_addr	addr;
 	int		plen;
 };
 
 struct fib6_table;
 
-struct rt6_info
-{
+struct rt6_info {
 	union {
 		struct dst_entry	dst;
 	} u;
@@ -127,8 +123,7 @@
 	return ((struct rt6_info *)dst)->rt6i_idev;
 }
 
-struct fib6_walker_t
-{
+struct fib6_walker_t {
 	struct fib6_walker_t *prev, *next;
 	struct fib6_node *root, *node;
 	struct rt6_info *leaf;
diff --git a/include/net/ip6_route.h b/include/net/ip6_route.h
index 0e1b8ae..4a808de 100644
--- a/include/net/ip6_route.h
+++ b/include/net/ip6_route.h
@@ -103,8 +103,7 @@
 
 struct netlink_callback;
 
-struct rt6_rtnl_dump_arg
-{
+struct rt6_rtnl_dump_arg {
 	struct sk_buff *skb;
 	struct netlink_callback *cb;
 	struct net *net;
diff --git a/include/net/ip_fib.h b/include/net/ip_fib.h
index 4d22fab..c93f94e 100644
--- a/include/net/ip_fib.h
+++ b/include/net/ip_fib.h
@@ -144,18 +144,21 @@
 	struct hlist_node tb_hlist;
 	u32		tb_id;
 	int		tb_default;
-	int		(*tb_lookup)(struct fib_table *tb, const struct flowi *flp, struct fib_result *res);
-	int		(*tb_insert)(struct fib_table *, struct fib_config *);
-	int		(*tb_delete)(struct fib_table *, struct fib_config *);
-	int		(*tb_dump)(struct fib_table *table, struct sk_buff *skb,
-				     struct netlink_callback *cb);
-	int		(*tb_flush)(struct fib_table *table);
-	void		(*tb_select_default)(struct fib_table *table,
-					     const struct flowi *flp, struct fib_result *res);
-
 	unsigned char	tb_data[0];
 };
 
+extern int fib_table_lookup(struct fib_table *tb, const struct flowi *flp,
+			    struct fib_result *res);
+extern int fib_table_insert(struct fib_table *, struct fib_config *);
+extern int fib_table_delete(struct fib_table *, struct fib_config *);
+extern int fib_table_dump(struct fib_table *table, struct sk_buff *skb,
+			  struct netlink_callback *cb);
+extern int fib_table_flush(struct fib_table *table);
+extern void fib_table_select_default(struct fib_table *table,
+				     const struct flowi *flp,
+				     struct fib_result *res);
+
+
 #ifndef CONFIG_IP_MULTIPLE_TABLES
 
 #define TABLE_LOCAL_INDEX	0
@@ -182,11 +185,11 @@
 	struct fib_table *table;
 
 	table = fib_get_table(net, RT_TABLE_LOCAL);
-	if (!table->tb_lookup(table, flp, res))
+	if (!fib_table_lookup(table, flp, res))
 		return 0;
 
 	table = fib_get_table(net, RT_TABLE_MAIN);
-	if (!table->tb_lookup(table, flp, res))
+	if (!fib_table_lookup(table, flp, res))
 		return 0;
 	return -ENETUNREACH;
 }
diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h
index 98978e7..8dc3296 100644
--- a/include/net/ip_vs.h
+++ b/include/net/ip_vs.h
@@ -251,8 +251,7 @@
 	u32			outbps;
 };
 
-struct ip_vs_stats
-{
+struct ip_vs_stats {
 	struct ip_vs_stats_user	ustats;         /* statistics */
 	struct ip_vs_estimator	est;		/* estimator */
 
@@ -518,8 +517,7 @@
 /*
  *	The application module object (a.k.a. app incarnation)
  */
-struct ip_vs_app
-{
+struct ip_vs_app {
 	struct list_head	a_list;		/* member in app list */
 	int			type;		/* IP_VS_APP_TYPE_xxx */
 	char			*name;		/* application module name */
diff --git a/include/net/ipip.h b/include/net/ipip.h
index 87acf8f..11e8513 100644
--- a/include/net/ipip.h
+++ b/include/net/ipip.h
@@ -7,8 +7,15 @@
 /* Keep error state on tunnel for 30 sec */
 #define IPTUNNEL_ERR_TIMEO	(30*HZ)
 
-struct ip_tunnel
-{
+/* 6rd prefix/relay information */
+struct ip_tunnel_6rd_parm {
+	struct in6_addr		prefix;
+	__be32			relay_prefix;
+	u16			prefixlen;
+	u16			relay_prefixlen;
+};
+
+struct ip_tunnel {
 	struct ip_tunnel	*next;
 	struct net_device	*dev;
 
@@ -23,15 +30,19 @@
 
 	struct ip_tunnel_parm	parms;
 
+	/* for SIT */
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel_6rd_parm	ip6rd;
+#endif
 	struct ip_tunnel_prl_entry	*prl;		/* potential router list */
 	unsigned int			prl_count;	/* # of entries in PRL */
 };
 
-struct ip_tunnel_prl_entry
-{
+struct ip_tunnel_prl_entry {
 	struct ip_tunnel_prl_entry	*next;
 	__be32				addr;
 	u16				flags;
+	struct rcu_head			rcu_head;
 };
 
 #define IPTUNNEL_XMIT() do {						\
@@ -42,9 +53,9 @@
 	ip_select_ident(iph, &rt->u.dst, NULL);				\
 									\
 	err = ip_local_out(skb);					\
-	if (net_xmit_eval(err) == 0) {					\
-		stats->tx_bytes += pkt_len;				\
-		stats->tx_packets++;					\
+	if (likely(net_xmit_eval(err) == 0)) {				\
+		txq->tx_bytes += pkt_len;				\
+		txq->tx_packets++;					\
 	} else {							\
 		stats->tx_errors++;					\
 		stats->tx_aborted_errors++;				\
diff --git a/include/net/ipv6.h b/include/net/ipv6.h
index 8c31d8a..92db861 100644
--- a/include/net/ipv6.h
+++ b/include/net/ipv6.h
@@ -160,8 +160,7 @@
 #define ICMP6MSGIN_INC_STATS_BH(net, idev, field)	\
 	_DEVINC(net, icmpv6msg, _BH, idev, field)
 
-struct ip6_ra_chain
-{
+struct ip6_ra_chain {
 	struct ip6_ra_chain	*next;
 	struct sock		*sk;
 	int			sel;
@@ -176,8 +175,7 @@
    ancillary data and passed to IPv6.
  */
 
-struct ipv6_txoptions
-{
+struct ipv6_txoptions {
 	/* Length of this structure */
 	int			tot_len;
 
@@ -194,8 +192,7 @@
 	/* Option buffer, as read by IPV6_PKTOPTIONS, starts here. */
 };
 
-struct ip6_flowlabel
-{
+struct ip6_flowlabel {
 	struct ip6_flowlabel	*next;
 	__be32			label;
 	atomic_t		users;
@@ -212,8 +209,7 @@
 #define IPV6_FLOWINFO_MASK	cpu_to_be32(0x0FFFFFFF)
 #define IPV6_FLOWLABEL_MASK	cpu_to_be32(0x000FFFFF)
 
-struct ipv6_fl_socklist
-{
+struct ipv6_fl_socklist {
 	struct ipv6_fl_socklist	*next;
 	struct ip6_flowlabel	*fl;
 };
diff --git a/include/net/iw_handler.h b/include/net/iw_handler.h
index e9054a2..b2b98f3 100644
--- a/include/net/iw_handler.h
+++ b/include/net/iw_handler.h
@@ -300,8 +300,7 @@
  * This struct is also my long term insurance. I can add new fields here
  * without breaking the prototype of iw_handler...
  */
-struct iw_request_info
-{
+struct iw_request_info {
 	__u16		cmd;		/* Wireless Extension command */
 	__u16		flags;		/* More to come ;-) */
 };
@@ -321,20 +320,20 @@
  * shared by all driver instances... Same for the members...
  * This will be linked from net_device in <linux/netdevice.h>
  */
-struct iw_handler_def
-{
-	/* Number of handlers defined (more precisely, index of the
-	 * last defined handler + 1) */
-	__u16			num_standard;
-	__u16			num_private;
-	/* Number of private arg description */
-	__u16			num_private_args;
+struct iw_handler_def {
 
 	/* Array of handlers for standard ioctls
 	 * We will call dev->wireless_handlers->standard[ioctl - SIOCSIWCOMMIT]
 	 */
 	const iw_handler *	standard;
+	/* Number of handlers defined (more precisely, index of the
+	 * last defined handler + 1) */
+	__u16			num_standard;
 
+#ifdef CONFIG_WEXT_PRIV
+	__u16			num_private;
+	/* Number of private arg description */
+	__u16			num_private_args;
 	/* Array of handlers for private ioctls
 	 * Will call dev->wireless_handlers->private[ioctl - SIOCIWFIRSTPRIV]
 	 */
@@ -344,6 +343,7 @@
 	 * can put it in any order you want and should not leave holes...
 	 * We will automatically export that to user space... */
 	const struct iw_priv_args *	private_args;
+#endif
 
 	/* New location of get_wireless_stats, to de-bloat struct net_device.
 	 * The old pointer in struct net_device will be gradually phased
@@ -370,8 +370,7 @@
 /*
  * Describe how a standard IOCTL looks like.
  */
-struct iw_ioctl_description
-{
+struct iw_ioctl_description {
 	__u8	header_type;		/* NULL, iw_point or other */
 	__u8	token_type;		/* Future */
 	__u16	token_size;		/* Granularity of payload */
@@ -393,8 +392,7 @@
 /*
  * Instance specific spy data, i.e. addresses spied and quality for them.
  */
-struct iw_spy_data
-{
+struct iw_spy_data {
 	/* --- Standard spy support --- */
 	int			spy_number;
 	u_char			spy_address[IW_MAX_SPY][ETH_ALEN];
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index c75b960..c42c4a8 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1665,11 +1665,11 @@
  * header if %RX_FLAG_RADIOTAP is set in the @status flags.
  *
  * This function may not be called in IRQ context. Calls to this function
- * for a single hardware must be synchronized against each other. Calls
- * to this function and ieee80211_rx_irqsafe() may not be mixed for a
- * single hardware.
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware.
  *
- * Note that right now, this function must be called with softirqs disabled.
+ * In process context use instead ieee80211_rx_ni().
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -1682,8 +1682,8 @@
  * Like ieee80211_rx() but can be called in IRQ context
  * (internally defers to a tasklet.)
  *
- * Calls to this function and ieee80211_rx() may not be mixed for a
- * single hardware.
+ * Calls to this function, ieee80211_rx() or ieee80211_rx_ni() may not
+ * be mixed for a single hardware.
  *
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
@@ -1691,6 +1691,26 @@
 void ieee80211_rx_irqsafe(struct ieee80211_hw *hw, struct sk_buff *skb);
 
 /**
+ * ieee80211_rx_ni - receive frame (in process context)
+ *
+ * Like ieee80211_rx() but can be called in process context
+ * (internally disables bottom halves).
+ *
+ * Calls to this function, ieee80211_rx() and ieee80211_rx_irqsafe() may
+ * not be mixed for a single hardware.
+ *
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ */
+static inline void ieee80211_rx_ni(struct ieee80211_hw *hw,
+				   struct sk_buff *skb)
+{
+	local_bh_disable();
+	ieee80211_rx(hw, skb);
+	local_bh_enable();
+}
+
+/**
  * ieee80211_tx_status - transmit status callback
  *
  * Call this function for all transmitted frames after they have been
diff --git a/include/net/neighbour.h b/include/net/neighbour.h
index 3817fda..db8e96d 100644
--- a/include/net/neighbour.h
+++ b/include/net/neighbour.h
@@ -37,8 +37,7 @@
 
 struct neighbour;
 
-struct neigh_parms
-{
+struct neigh_parms {
 #ifdef CONFIG_NET_NS
 	struct net *net;
 #endif
@@ -70,8 +69,7 @@
 	int	locktime;
 };
 
-struct neigh_statistics
-{
+struct neigh_statistics {
 	unsigned long allocs;		/* number of allocated neighs */
 	unsigned long destroys;		/* number of destroyed neighs */
 	unsigned long hash_grows;	/* number of hash resizes */
@@ -97,8 +95,7 @@
 		preempt_enable();					\
 	} while (0)
 
-struct neighbour
-{
+struct neighbour {
 	struct neighbour	*next;
 	struct neigh_table	*tbl;
 	struct neigh_parms	*parms;
@@ -122,8 +119,7 @@
 	u8			primary_key[0];
 };
 
-struct neigh_ops
-{
+struct neigh_ops {
 	int			family;
 	void			(*solicit)(struct neighbour *, struct sk_buff*);
 	void			(*error_report)(struct neighbour *, struct sk_buff*);
@@ -133,8 +129,7 @@
 	int			(*queue_xmit)(struct sk_buff*);
 };
 
-struct pneigh_entry
-{
+struct pneigh_entry {
 	struct pneigh_entry	*next;
 #ifdef CONFIG_NET_NS
 	struct net		*net;
@@ -149,8 +144,7 @@
  */
 
 
-struct neigh_table
-{
+struct neigh_table {
 	struct neigh_table	*next;
 	int			family;
 	int			entry_size;
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index a120284..0addd45 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -28,6 +28,10 @@
 struct net_generic;
 struct sock;
 
+
+#define NETDEV_HASHBITS    8
+#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
+
 struct net {
 	atomic_t		count;		/* To decided when the network
 						 *  namespace should be freed.
@@ -80,7 +84,7 @@
 #ifdef CONFIG_XFRM
 	struct netns_xfrm	xfrm;
 #endif
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_WEXT_CORE
 	struct sk_buff_head	wext_nlevents;
 #endif
 	struct net_generic	*gen;
diff --git a/include/net/netfilter/nf_conntrack_ecache.h b/include/net/netfilter/nf_conntrack_ecache.h
index 4f20d58..475facc 100644
--- a/include/net/netfilter/nf_conntrack_ecache.h
+++ b/include/net/netfilter/nf_conntrack_ecache.h
@@ -13,8 +13,7 @@
 #include <net/netfilter/nf_conntrack_extend.h>
 
 /* Connection tracking event types */
-enum ip_conntrack_events
-{
+enum ip_conntrack_events {
 	IPCT_NEW		= 0,	/* new conntrack */
 	IPCT_RELATED		= 1,	/* related conntrack */
 	IPCT_DESTROY		= 2,	/* destroyed conntrack */
diff --git a/include/net/netfilter/nf_conntrack_expect.h b/include/net/netfilter/nf_conntrack_expect.h
index a965280..9a2b9cb 100644
--- a/include/net/netfilter/nf_conntrack_expect.h
+++ b/include/net/netfilter/nf_conntrack_expect.h
@@ -9,8 +9,7 @@
 extern unsigned int nf_ct_expect_hsize;
 extern unsigned int nf_ct_expect_max;
 
-struct nf_conntrack_expect
-{
+struct nf_conntrack_expect {
 	/* Conntrack expectation list member */
 	struct hlist_node lnode;
 
@@ -64,8 +63,7 @@
 #endif
 }
 
-struct nf_conntrack_expect_policy
-{
+struct nf_conntrack_expect_policy {
 	unsigned int	max_expected;
 	unsigned int	timeout;
 };
diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h
index 7f8fc5d..e192dc1 100644
--- a/include/net/netfilter/nf_conntrack_extend.h
+++ b/include/net/netfilter/nf_conntrack_extend.h
@@ -3,8 +3,7 @@
 
 #include <net/netfilter/nf_conntrack.h>
 
-enum nf_ct_ext_id
-{
+enum nf_ct_ext_id {
 	NF_CT_EXT_HELPER,
 	NF_CT_EXT_NAT,
 	NF_CT_EXT_ACCT,
@@ -65,8 +64,7 @@
 
 #define NF_CT_EXT_F_PREALLOC	0x0001
 
-struct nf_ct_ext_type
-{
+struct nf_ct_ext_type {
 	/* Destroys relationships (can be NULL). */
 	void (*destroy)(struct nf_conn *ct);
 	/* Called when realloacted (can be NULL).
diff --git a/include/net/netfilter/nf_conntrack_helper.h b/include/net/netfilter/nf_conntrack_helper.h
index 1b70680..d015de9 100644
--- a/include/net/netfilter/nf_conntrack_helper.h
+++ b/include/net/netfilter/nf_conntrack_helper.h
@@ -16,8 +16,7 @@
 
 #define NF_CT_HELPER_NAME_LEN	16
 
-struct nf_conntrack_helper
-{
+struct nf_conntrack_helper {
 	struct hlist_node hnode;	/* Internal use. */
 
 	const char *name;		/* name of the module */
diff --git a/include/net/netfilter/nf_conntrack_l3proto.h b/include/net/netfilter/nf_conntrack_l3proto.h
index 9f99d36..a754761 100644
--- a/include/net/netfilter/nf_conntrack_l3proto.h
+++ b/include/net/netfilter/nf_conntrack_l3proto.h
@@ -16,8 +16,7 @@
 #include <linux/seq_file.h>
 #include <net/netfilter/nf_conntrack.h>
 
-struct nf_conntrack_l3proto
-{
+struct nf_conntrack_l3proto {
 	/* L3 Protocol Family number. ex) PF_INET */
 	u_int16_t l3proto;
 
diff --git a/include/net/netfilter/nf_conntrack_l4proto.h b/include/net/netfilter/nf_conntrack_l4proto.h
index 3767fb4..ca6dcf3 100644
--- a/include/net/netfilter/nf_conntrack_l4proto.h
+++ b/include/net/netfilter/nf_conntrack_l4proto.h
@@ -15,8 +15,7 @@
 
 struct seq_file;
 
-struct nf_conntrack_l4proto
-{
+struct nf_conntrack_l4proto {
 	/* L3 Protocol number. */
 	u_int16_t l3proto;
 
diff --git a/include/net/netfilter/nf_conntrack_tuple.h b/include/net/netfilter/nf_conntrack_tuple.h
index 2628c15..4ee44c8 100644
--- a/include/net/netfilter/nf_conntrack_tuple.h
+++ b/include/net/netfilter/nf_conntrack_tuple.h
@@ -26,8 +26,7 @@
 
 /* The protocol-specific manipulable parts of the tuple: always in
    network order! */
-union nf_conntrack_man_proto
-{
+union nf_conntrack_man_proto {
 	/* Add other protocols here. */
 	__be16 all;
 
@@ -52,8 +51,7 @@
 };
 
 /* The manipulable part of the tuple. */
-struct nf_conntrack_man
-{
+struct nf_conntrack_man {
 	union nf_inet_addr u3;
 	union nf_conntrack_man_proto u;
 	/* Layer 3 protocol */
@@ -61,8 +59,7 @@
 };
 
 /* This contains the information to distinguish a connection. */
-struct nf_conntrack_tuple
-{
+struct nf_conntrack_tuple {
 	struct nf_conntrack_man src;
 
 	/* These are the parts of the tuple which are fixed. */
@@ -100,8 +97,7 @@
 	} dst;
 };
 
-struct nf_conntrack_tuple_mask
-{
+struct nf_conntrack_tuple_mask {
 	struct {
 		union nf_inet_addr u3;
 		union nf_conntrack_man_proto u;
diff --git a/include/net/netfilter/nf_nat.h b/include/net/netfilter/nf_nat.h
index 8df0b7f..f5f09f03 100644
--- a/include/net/netfilter/nf_nat.h
+++ b/include/net/netfilter/nf_nat.h
@@ -5,8 +5,7 @@
 
 #define NF_NAT_MAPPING_TYPE_MAX_NAMELEN 16
 
-enum nf_nat_manip_type
-{
+enum nf_nat_manip_type {
 	IP_NAT_MANIP_SRC,
 	IP_NAT_MANIP_DST
 };
@@ -30,8 +29,7 @@
 };
 
 /* Single range specification. */
-struct nf_nat_range
-{
+struct nf_nat_range {
 	/* Set to OR of flags above. */
 	unsigned int flags;
 
@@ -43,8 +41,7 @@
 };
 
 /* For backwards compat: don't use in modern code. */
-struct nf_nat_multi_range_compat
-{
+struct nf_nat_multi_range_compat {
 	unsigned int rangesize; /* Must be 1. */
 
 	/* hangs off end. */
@@ -57,8 +54,7 @@
 #include <net/netfilter/nf_conntrack_extend.h>
 
 /* per conntrack: nat application helper private data */
-union nf_conntrack_nat_help
-{
+union nf_conntrack_nat_help {
 	/* insert nat helper private data here */
 	struct nf_nat_pptp nat_pptp_info;
 };
@@ -66,8 +62,7 @@
 struct nf_conn;
 
 /* The structure embedded in the conntrack structure. */
-struct nf_conn_nat
-{
+struct nf_conn_nat {
 	struct hlist_node bysource;
 	struct nf_nat_seq seq[IP_CT_DIR_MAX];
 	struct nf_conn *ct;
diff --git a/include/net/netfilter/nf_nat_protocol.h b/include/net/netfilter/nf_nat_protocol.h
index f3662c4..c398017 100644
--- a/include/net/netfilter/nf_nat_protocol.h
+++ b/include/net/netfilter/nf_nat_protocol.h
@@ -6,8 +6,7 @@
 
 struct nf_nat_range;
 
-struct nf_nat_protocol
-{
+struct nf_nat_protocol {
 	/* Protocol number. */
 	unsigned int protonum;
 
diff --git a/include/net/phonet/phonet.h b/include/net/phonet/phonet.h
index d43f71b..fdb05fa 100644
--- a/include/net/phonet/phonet.h
+++ b/include/net/phonet/phonet.h
@@ -47,6 +47,7 @@
 extern const struct proto_ops phonet_dgram_ops;
 
 struct sock *pn_find_sock_by_sa(struct net *net, const struct sockaddr_pn *sa);
+void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb);
 void phonet_get_local_port_range(int *min, int *max);
 void pn_sock_hash(struct sock *sk);
 void pn_sock_unhash(struct sock *sk);
diff --git a/include/net/phonet/pn_dev.h b/include/net/phonet/pn_dev.h
index 44c923c..afa7def 100644
--- a/include/net/phonet/pn_dev.h
+++ b/include/net/phonet/pn_dev.h
@@ -47,6 +47,12 @@
 int phonet_address_lookup(struct net *net, u8 addr);
 void phonet_address_notify(int event, struct net_device *dev, u8 addr);
 
+int phonet_route_add(struct net_device *dev, u8 daddr);
+int phonet_route_del(struct net_device *dev, u8 daddr);
+void rtm_phonet_notify(int event, struct net_device *dev, u8 dst);
+struct net_device *phonet_route_get(struct net *net, u8 daddr);
+struct net_device *phonet_route_output(struct net *net, u8 daddr);
+
 #define PN_NO_ADDR	0xff
 
 extern const struct file_operations pn_sock_seq_fops;
diff --git a/include/net/pkt_cls.h b/include/net/pkt_cls.h
index d1ca314..3dd210d 100644
--- a/include/net/pkt_cls.h
+++ b/include/net/pkt_cls.h
@@ -7,8 +7,7 @@
 
 /* Basic packet classifier frontend definitions. */
 
-struct tcf_walker
-{
+struct tcf_walker {
 	int	stop;
 	int	skip;
 	int	count;
@@ -61,8 +60,7 @@
 		tp->q->ops->cl_ops->unbind_tcf(tp->q, cl);
 }
 
-struct tcf_exts
-{
+struct tcf_exts {
 #ifdef CONFIG_NET_CLS_ACT
 	struct tc_action *action;
 #endif
@@ -71,8 +69,7 @@
 /* Map to export classifier specific extension TLV types to the
  * generic extensions API. Unsupported extensions must be set to 0.
  */
-struct tcf_ext_map
-{
+struct tcf_ext_map {
 	int action;
 	int police;
 };
@@ -143,8 +140,7 @@
 /**
  * struct tcf_pkt_info - packet information
  */
-struct tcf_pkt_info
-{
+struct tcf_pkt_info {
 	unsigned char *		ptr;
 	int			nexthdr;
 };
@@ -162,8 +158,7 @@
  * @datalen: length of the ematch specific configuration data
  * @data: ematch specific data
  */
-struct tcf_ematch
-{
+struct tcf_ematch {
 	struct tcf_ematch_ops * ops;
 	unsigned long		data;
 	unsigned int		datalen;
@@ -211,8 +206,7 @@
  * @hdr: ematch tree header supplied by userspace
  * @matches: array of ematches
  */
-struct tcf_ematch_tree
-{
+struct tcf_ematch_tree {
 	struct tcf_ematch_tree_hdr hdr;
 	struct tcf_ematch *	matches;
 	
@@ -230,8 +224,7 @@
  * @owner: owner, must be set to THIS_MODULE
  * @link: link to previous/next ematch module (internal use)
  */
-struct tcf_ematch_ops
-{
+struct tcf_ematch_ops {
 	int			kind;
 	int			datalen;
 	int			(*change)(struct tcf_proto *, void *,
@@ -302,8 +295,7 @@
 
 #else /* CONFIG_NET_EMATCH */
 
-struct tcf_ematch_tree
-{
+struct tcf_ematch_tree {
 };
 
 #define tcf_em_tree_validate(tp, tb, t) ((void)(t), 0)
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h
index f911ec75..2d56726 100644
--- a/include/net/pkt_sched.h
+++ b/include/net/pkt_sched.h
@@ -5,8 +5,7 @@
 #include <linux/ktime.h>
 #include <net/sch_generic.h>
 
-struct qdisc_walker
-{
+struct qdisc_walker {
 	int	stop;
 	int	skip;
 	int	count;
diff --git a/include/net/protocol.h b/include/net/protocol.h
index 60249e5..f1effdd3c 100644
--- a/include/net/protocol.h
+++ b/include/net/protocol.h
@@ -47,8 +47,7 @@
 };
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
-struct inet6_protocol 
-{
+struct inet6_protocol {
 	int	(*handler)(struct sk_buff *skb);
 
 	void	(*err_handler)(struct sk_buff *skb,
@@ -83,10 +82,6 @@
 	struct proto	 *prot;
 	const struct proto_ops *ops;
   
-	int              capability; /* Which (if any) capability do
-				      * we need to use this socket
-				      * interface?
-                                      */
 	char             no_check;   /* checksum on rcv/xmit/none? */
 	unsigned char	 flags;      /* See INET_PROTOSW_* below.  */
 };
diff --git a/include/net/red.h b/include/net/red.h
index 3cf31d4..995108e 100644
--- a/include/net/red.h
+++ b/include/net/red.h
@@ -90,8 +90,7 @@
 #define RED_STAB_SIZE	256
 #define RED_STAB_MASK	(RED_STAB_SIZE - 1)
 
-struct red_stats
-{
+struct red_stats {
 	u32		prob_drop;	/* Early probability drops */
 	u32		prob_mark;	/* Early probability marks */
 	u32		forced_drop;	/* Forced drops, qavg > max_thresh */
@@ -101,8 +100,7 @@
 	u32		backlog;
 };
 
-struct red_parms
-{
+struct red_parms {
 	/* Parameters */
 	u32		qth_min;	/* Min avg length threshold: A scaled */
 	u32		qth_max;	/* Max avg length threshold: A scaled */
diff --git a/include/net/route.h b/include/net/route.h
index 40f6346..cfb4c07 100644
--- a/include/net/route.h
+++ b/include/net/route.h
@@ -49,10 +49,8 @@
 
 struct fib_nh;
 struct inet_peer;
-struct rtable
-{
-	union
-	{
+struct rtable {
+	union {
 		struct dst_entry	dst;
 	} u;
 
@@ -77,16 +75,14 @@
 	struct inet_peer	*peer; /* long-living peer info */
 };
 
-struct ip_rt_acct
-{
+struct ip_rt_acct {
 	__u32 	o_bytes;
 	__u32 	o_packets;
 	__u32 	i_bytes;
 	__u32 	i_packets;
 };
 
-struct rt_cache_stat 
-{
+struct rt_cache_stat {
         unsigned int in_hit;
         unsigned int in_slow_tot;
         unsigned int in_slow_mc;
diff --git a/include/net/rtnetlink.h b/include/net/rtnetlink.h
index c3aa044d..cd5af1f 100644
--- a/include/net/rtnetlink.h
+++ b/include/net/rtnetlink.h
@@ -61,7 +61,8 @@
 	int			(*changelink)(struct net_device *dev,
 					      struct nlattr *tb[],
 					      struct nlattr *data[]);
-	void			(*dellink)(struct net_device *dev);
+	void			(*dellink)(struct net_device *dev,
+					   struct list_head *head);
 
 	size_t			(*get_size)(const struct net_device *dev);
 	int			(*fill_info)(struct sk_buff *skb,
diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h
index c33180d..dad558b 100644
--- a/include/net/sch_generic.h
+++ b/include/net/sch_generic.h
@@ -15,16 +15,14 @@
 struct tcf_walker;
 struct module;
 
-struct qdisc_rate_table
-{
+struct qdisc_rate_table {
 	struct tc_ratespec rate;
 	u32		data[256];
 	struct qdisc_rate_table *next;
 	int		refcnt;
 };
 
-enum qdisc_state_t
-{
+enum qdisc_state_t {
 	__QDISC_STATE_RUNNING,
 	__QDISC_STATE_SCHED,
 	__QDISC_STATE_DEACTIVATED,
@@ -37,8 +35,7 @@
 	u16			data[];
 };
 
-struct Qdisc
-{
+struct Qdisc {
 	int 			(*enqueue)(struct sk_buff *skb, struct Qdisc *dev);
 	struct sk_buff *	(*dequeue)(struct Qdisc *dev);
 	unsigned		flags;
@@ -78,8 +75,7 @@
 	struct gnet_stats_queue	qstats;
 };
 
-struct Qdisc_class_ops
-{
+struct Qdisc_class_ops {
 	/* Child qdisc manipulation */
 	struct netdev_queue *	(*select_queue)(struct Qdisc *, struct tcmsg *);
 	int			(*graft)(struct Qdisc *, unsigned long cl,
@@ -108,8 +104,7 @@
 					struct gnet_dump *);
 };
 
-struct Qdisc_ops
-{
+struct Qdisc_ops {
 	struct Qdisc_ops	*next;
 	const struct Qdisc_class_ops	*cl_ops;
 	char			id[IFNAMSIZ];
@@ -133,14 +128,12 @@
 };
 
 
-struct tcf_result
-{
+struct tcf_result {
 	unsigned long	class;
 	u32		classid;
 };
 
-struct tcf_proto_ops
-{
+struct tcf_proto_ops {
 	struct tcf_proto_ops	*next;
 	char			kind[IFNAMSIZ];
 
@@ -164,8 +157,7 @@
 	struct module		*owner;
 };
 
-struct tcf_proto
-{
+struct tcf_proto {
 	/* Fast access part */
 	struct tcf_proto	*next;
 	void			*root;
@@ -261,14 +253,12 @@
 extern struct Qdisc_ops pfifo_fast_ops;
 extern struct Qdisc_ops mq_qdisc_ops;
 
-struct Qdisc_class_common
-{
+struct Qdisc_class_common {
 	u32			classid;
 	struct hlist_node	hnode;
 };
 
-struct Qdisc_class_hash
-{
+struct Qdisc_class_hash {
 	struct hlist_head	*hash;
 	unsigned int		hashsize;
 	unsigned int		hashmask;
diff --git a/include/net/scm.h b/include/net/scm.h
index cf48c80..8360e47 100644
--- a/include/net/scm.h
+++ b/include/net/scm.h
@@ -12,15 +12,13 @@
  */
 #define SCM_MAX_FD	255
 
-struct scm_fp_list
-{
+struct scm_fp_list {
 	struct list_head	list;
 	int			count;
 	struct file		*fp[SCM_MAX_FD];
 };
 
-struct scm_cookie
-{
+struct scm_cookie {
 	struct ucred		creds;		/* Skb credentials	*/
 	struct scm_fp_list	*fp;		/* Passed files		*/
 #ifdef CONFIG_SECURITY_NETWORK
@@ -88,8 +86,7 @@
 static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg,
 				struct scm_cookie *scm, int flags)
 {
-	if (!msg->msg_control)
-	{
+	if (!msg->msg_control) {
 		if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp)
 			msg->msg_flags |= MSG_CTRUNC;
 		scm_destroy(scm);
diff --git a/include/net/sctp/sctp.h b/include/net/sctp/sctp.h
index 8a6d529..78740ec 100644
--- a/include/net/sctp/sctp.h
+++ b/include/net/sctp/sctp.h
@@ -227,8 +227,7 @@
 #endif /* !TEST_FRAME */
 
 /* sctp mib definitions */
-enum
-{
+enum {
 	SCTP_MIB_NUM = 0,
 	SCTP_MIB_CURRESTAB,			/* CurrEstab */
 	SCTP_MIB_ACTIVEESTABS,			/* ActiveEstabs */
diff --git a/include/net/sock.h b/include/net/sock.h
index 9f96394..55de3bd 100644
--- a/include/net/sock.h
+++ b/include/net/sock.h
@@ -107,6 +107,7 @@
  *	@skc_node: main hash linkage for various protocol lookup tables
  *	@skc_nulls_node: main hash linkage for UDP/UDP-Lite protocol
  *	@skc_refcnt: reference count
+ *	@skc_tx_queue_mapping: tx queue number for this connection
  *	@skc_hash: hash value used with various protocol lookup tables
  *	@skc_family: network address family
  *	@skc_state: Connection state
@@ -128,6 +129,7 @@
 		struct hlist_nulls_node skc_nulls_node;
 	};
 	atomic_t		skc_refcnt;
+	int			skc_tx_queue_mapping;
 
 	unsigned int		skc_hash;
 	unsigned short		skc_family;
@@ -215,6 +217,7 @@
 #define sk_node			__sk_common.skc_node
 #define sk_nulls_node		__sk_common.skc_nulls_node
 #define sk_refcnt		__sk_common.skc_refcnt
+#define sk_tx_queue_mapping	__sk_common.skc_tx_queue_mapping
 
 #define sk_copy_start		__sk_common.skc_hash
 #define sk_hash			__sk_common.skc_hash
@@ -504,6 +507,8 @@
 	SOCK_TIMESTAMPING_SOFTWARE,     /* %SOF_TIMESTAMPING_SOFTWARE */
 	SOCK_TIMESTAMPING_RAW_HARDWARE, /* %SOF_TIMESTAMPING_RAW_HARDWARE */
 	SOCK_TIMESTAMPING_SYS_HARDWARE, /* %SOF_TIMESTAMPING_SYS_HARDWARE */
+	SOCK_FASYNC, /* fasync() active */
+	SOCK_RXQ_OVFL,
 };
 
 static inline void sock_copy_flags(struct sock *nsk, struct sock *osk)
@@ -1092,8 +1097,29 @@
 extern int sk_receive_skb(struct sock *sk, struct sk_buff *skb,
 			  const int nested);
 
+static inline void sk_tx_queue_set(struct sock *sk, int tx_queue)
+{
+	sk->sk_tx_queue_mapping = tx_queue;
+}
+
+static inline void sk_tx_queue_clear(struct sock *sk)
+{
+	sk->sk_tx_queue_mapping = -1;
+}
+
+static inline int sk_tx_queue_get(const struct sock *sk)
+{
+	return sk->sk_tx_queue_mapping;
+}
+
+static inline bool sk_tx_queue_recorded(const struct sock *sk)
+{
+	return (sk && sk->sk_tx_queue_mapping >= 0);
+}
+
 static inline void sk_set_socket(struct sock *sk, struct socket *sock)
 {
+	sk_tx_queue_clear(sk);
 	sk->sk_socket = sock;
 }
 
@@ -1150,6 +1176,7 @@
 {
 	struct dst_entry *old_dst;
 
+	sk_tx_queue_clear(sk);
 	old_dst = sk->sk_dst_cache;
 	sk->sk_dst_cache = dst;
 	dst_release(old_dst);
@@ -1168,6 +1195,7 @@
 {
 	struct dst_entry *old_dst;
 
+	sk_tx_queue_clear(sk);
 	old_dst = sk->sk_dst_cache;
 	sk->sk_dst_cache = NULL;
 	dst_release(old_dst);
@@ -1396,7 +1424,7 @@
 
 static inline void sk_wake_async(struct sock *sk, int how, int band)
 {
-	if (sk->sk_socket && sk->sk_socket->fasync_list)
+	if (sock_flag(sk, SOCK_FASYNC))
 		sock_wake_async(sk->sk_socket, how, band);
 }
 
@@ -1492,6 +1520,8 @@
 		sk->sk_stamp = kt;
 }
 
+extern void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk, struct sk_buff *skb);
+
 /**
  * sock_tx_timestamp - checks whether the outgoing packet is to be time stamped
  * @msg:	outgoing packet
diff --git a/include/net/tc_act/tc_skbedit.h b/include/net/tc_act/tc_skbedit.h
index 6abb3ed..e103fe0 100644
--- a/include/net/tc_act/tc_skbedit.h
+++ b/include/net/tc_act/tc_skbedit.h
@@ -26,7 +26,9 @@
 	struct tcf_common	common;
 	u32			flags;
 	u32     		priority;
+	u32     		mark;
 	u16			queue_mapping;
+	/* XXX: 16-bit pad here? */
 };
 #define to_skbedit(pc) \
 	container_of(pc, struct tcf_skbedit, common)
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 03a49c7..bf20f88 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -359,8 +359,7 @@
 		inet_rsk(req)->ecn_ok = 1;
 }
 
-enum tcp_tw_status
-{
+enum tcp_tw_status {
 	TCP_TW_SUCCESS = 0,
 	TCP_TW_RST = 1,
 	TCP_TW_ACK = 2,
@@ -409,7 +408,8 @@
 
 extern void			tcp_parse_options(struct sk_buff *skb,
 						  struct tcp_options_received *opt_rx,
-						  int estab);
+						  int estab,
+						  struct dst_entry *dst);
 
 extern u8			*tcp_parse_md5sig_option(struct tcphdr *th);
 
diff --git a/include/net/udp.h b/include/net/udp.h
index f98abd2..22aa2e7 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -54,12 +54,19 @@
 	struct hlist_nulls_head	head;
 	spinlock_t		lock;
 } __attribute__((aligned(2 * sizeof(long))));
+
 struct udp_table {
-	struct udp_hslot	hash[UDP_HTABLE_SIZE];
+	struct udp_hslot	*hash;
+	unsigned int mask;
+	unsigned int log;
 };
 extern struct udp_table udp_table;
-extern void udp_table_init(struct udp_table *);
-
+extern void udp_table_init(struct udp_table *, const char *);
+static inline struct udp_hslot *udp_hashslot(struct udp_table *table,
+					     struct net *net, unsigned num)
+{
+	return &table->hash[udp_hashfn(net, num, table->mask)];
+}
 
 /* Note: this must match 'valbool' in sock_setsockopt */
 #define UDP_CSUM_NOXMIT		1
diff --git a/include/net/wext.h b/include/net/wext.h
index 3f2b94d..4f6e742 100644
--- a/include/net/wext.h
+++ b/include/net/wext.h
@@ -1,29 +1,19 @@
 #ifndef __NET_WEXT_H
 #define __NET_WEXT_H
 
-/*
- * wireless extensions interface to the core code
- */
+#include <net/iw_handler.h>
 
 struct net;
 
-#ifdef CONFIG_WIRELESS_EXT
-extern int wext_proc_init(struct net *net);
-extern void wext_proc_exit(struct net *net);
+#ifdef CONFIG_WEXT_CORE
 extern int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
 			     void __user *arg);
 extern int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
 				    unsigned long arg);
+
 extern struct iw_statistics *get_wireless_stats(struct net_device *dev);
+extern int call_commit_handler(struct net_device *dev);
 #else
-static inline int wext_proc_init(struct net *net)
-{
-	return 0;
-}
-static inline void wext_proc_exit(struct net *net)
-{
-	return;
-}
 static inline int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
 				    void __user *arg)
 {
@@ -36,4 +26,35 @@
 }
 #endif
 
+#ifdef CONFIG_WEXT_PROC
+extern int wext_proc_init(struct net *net);
+extern void wext_proc_exit(struct net *net);
+#else
+static inline int wext_proc_init(struct net *net)
+{
+	return 0;
+}
+static inline void wext_proc_exit(struct net *net)
+{
+	return;
+}
+#endif
+
+#ifdef CONFIG_WEXT_PRIV
+int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
+		       unsigned int cmd, struct iw_request_info *info,
+		       iw_handler handler);
+int compat_private_call(struct net_device *dev, struct iwreq *iwr,
+			unsigned int cmd, struct iw_request_info *info,
+			iw_handler handler);
+int iw_handler_get_private(struct net_device *		dev,
+			   struct iw_request_info *	info,
+			   union iwreq_data *		wrqu,
+			   char *			extra);
+#else
+#define ioctl_private_call NULL
+#define compat_private_call NULL
+#endif
+
+
 #endif /* __NET_WEXT_H */
diff --git a/include/net/xfrm.h b/include/net/xfrm.h
index 223e90a..7f38ef5 100644
--- a/include/net/xfrm.h
+++ b/include/net/xfrm.h
@@ -121,8 +121,7 @@
 };
 
 /* Full description of state of transformer. */
-struct xfrm_state
-{
+struct xfrm_state {
 #ifdef CONFIG_NET_NS
 	struct net		*xs_net;
 #endif
@@ -237,8 +236,7 @@
 };
 
 /* callback structure passed from either netlink or pfkey */
-struct km_event
-{
+struct km_event {
 	union {
 		u32 hard;
 		u32 proto;
@@ -313,8 +311,7 @@
 
 extern void xfrm_state_delete_tunnel(struct xfrm_state *x);
 
-struct xfrm_type
-{
+struct xfrm_type {
 	char			*description;
 	struct module		*owner;
 	__u8			proto;
@@ -420,8 +417,7 @@
 		return x->inner_mode_iaf;
 }
 
-struct xfrm_tmpl
-{
+struct xfrm_tmpl {
 /* id in template is interpreted as:
  * daddr - destination of tunnel, may be zero for transport mode.
  * spi   - zero to acquire spi. Not zero if spi is static, then
@@ -468,8 +464,7 @@
 	u32 seq;
 };
 
-struct xfrm_policy
-{
+struct xfrm_policy {
 #ifdef CONFIG_NET_NS
 	struct net		*xp_net;
 #endif
@@ -538,8 +533,7 @@
 /* default seq threshold size */
 #define XFRM_AE_SEQT_SIZE		2
 
-struct xfrm_mgr
-{
+struct xfrm_mgr {
 	struct list_head	list;
 	char			*id;
 	int			(*notify)(struct xfrm_state *x, struct km_event *c);
@@ -626,8 +620,7 @@
 #define XFRM_SPI_SKB_CB(__skb) ((struct xfrm_spi_skb_cb *)&((__skb)->cb[0]))
 
 /* Audit Information */
-struct xfrm_audit
-{
+struct xfrm_audit {
 	u32	secid;
 	uid_t	loginuid;
 	u32	sessionid;
@@ -871,8 +864,7 @@
  * bundles differing by session id. All the bundles grow from a parent
  * policy rule.
  */
-struct xfrm_dst
-{
+struct xfrm_dst {
 	union {
 		struct dst_entry	dst;
 		struct rtable		rt;
@@ -907,8 +899,7 @@
 
 extern void xfrm_dst_ifdown(struct dst_entry *dst, struct net_device *dev);
 
-struct sec_path
-{
+struct sec_path {
 	atomic_t		refcnt;
 	int			len;
 	struct xfrm_state	*xvec[XFRM_MAX_DEPTH];
@@ -1500,9 +1491,6 @@
 typedef int (icv_update_fn_t)(struct hash_desc *, struct scatterlist *,
 			      unsigned int);
 
-extern int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *tfm,
-			int offset, int len, icv_update_fn_t icv_update);
-
 static inline int xfrm_addr_cmp(xfrm_address_t *a, xfrm_address_t *b,
 				int family)
 {
diff --git a/include/pcmcia/ss.h b/include/pcmcia/ss.h
index 9a3b498..d696a69 100644
--- a/include/pcmcia/ss.h
+++ b/include/pcmcia/ss.h
@@ -279,7 +279,7 @@
 extern struct pccard_resource_ops pccard_nonstatic_ops;
 
 /* socket drivers are expected to use these callbacks in their .drv struct */
-extern int pcmcia_socket_dev_suspend(struct device *dev, pm_message_t state);
+extern int pcmcia_socket_dev_suspend(struct device *dev);
 extern int pcmcia_socket_dev_resume(struct device *dev);
 
 /* socket drivers use this callback in their IRQ handler */
diff --git a/include/trace/events/block.h b/include/trace/events/block.h
index d86af94..00405b5 100644
--- a/include/trace/events/block.h
+++ b/include/trace/events/block.h
@@ -488,6 +488,39 @@
 		  (unsigned long long)__entry->old_sector)
 );
 
+TRACE_EVENT(block_rq_remap,
+
+	TP_PROTO(struct request_queue *q, struct request *rq, dev_t dev,
+		 sector_t from),
+
+	TP_ARGS(q, rq, dev, from),
+
+	TP_STRUCT__entry(
+		__field( dev_t,		dev		)
+		__field( sector_t,	sector		)
+		__field( unsigned int,	nr_sector	)
+		__field( dev_t,		old_dev		)
+		__field( sector_t,	old_sector	)
+		__array( char,		rwbs,	6	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= disk_devt(rq->rq_disk);
+		__entry->sector		= blk_rq_pos(rq);
+		__entry->nr_sector	= blk_rq_sectors(rq);
+		__entry->old_dev	= dev;
+		__entry->old_sector	= from;
+		blk_fill_rwbs_rq(__entry->rwbs, rq);
+	),
+
+	TP_printk("%d,%d %s %llu + %u <- (%d,%d) %llu",
+		  MAJOR(__entry->dev), MINOR(__entry->dev), __entry->rwbs,
+		  (unsigned long long)__entry->sector,
+		  __entry->nr_sector,
+		  MAJOR(__entry->old_dev), MINOR(__entry->old_dev),
+		  (unsigned long long)__entry->old_sector)
+);
+
 #endif /* _TRACE_BLOCK_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/ext4.h b/include/trace/events/ext4.h
index c1bd8f1..d09550b 100644
--- a/include/trace/events/ext4.h
+++ b/include/trace/events/ext4.h
@@ -11,6 +11,7 @@
 struct ext4_allocation_request;
 struct ext4_prealloc_space;
 struct ext4_inode_info;
+struct mpage_da_data;
 
 #define EXT4_I(inode) (container_of(inode, struct ext4_inode_info, vfs_inode))
 
@@ -236,6 +237,7 @@
 		__field(	char,	for_kupdate		)
 		__field(	char,	for_reclaim		)
 		__field(	char,	range_cyclic		)
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -249,15 +251,17 @@
 		__entry->for_kupdate	= wbc->for_kupdate;
 		__entry->for_reclaim	= wbc->for_reclaim;
 		__entry->range_cyclic	= wbc->range_cyclic;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d",
+	TP_printk("dev %s ino %lu nr_to_write %ld pages_skipped %ld range_start %llu range_end %llu nonblocking %d for_kupdate %d for_reclaim %d range_cyclic %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->nr_to_write,
 		  __entry->pages_skipped, __entry->range_start,
 		  __entry->range_end, __entry->nonblocking,
 		  __entry->for_kupdate, __entry->for_reclaim,
-		  __entry->range_cyclic)
+		  __entry->range_cyclic,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_pages,
@@ -309,6 +313,7 @@
 		__field(	char,	encountered_congestion	)
 		__field(	char,	more_io			)	
 		__field(	char,	no_nrwrite_index_update )
+		__field(       pgoff_t,	writeback_index		)
 	),
 
 	TP_fast_assign(
@@ -320,14 +325,16 @@
 		__entry->encountered_congestion	= wbc->encountered_congestion;
 		__entry->more_io	= wbc->more_io;
 		__entry->no_nrwrite_index_update = wbc->no_nrwrite_index_update;
+		__entry->writeback_index = inode->i_mapping->writeback_index;
 	),
 
-	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d",
+	TP_printk("dev %s ino %lu ret %d pages_written %d pages_skipped %ld congestion %d more_io %d no_nrwrite_index_update %d writeback_index %lu",
 		  jbd2_dev_to_name(__entry->dev),
 		  (unsigned long) __entry->ino, __entry->ret,
 		  __entry->pages_written, __entry->pages_skipped,
 		  __entry->encountered_congestion, __entry->more_io,
-		  __entry->no_nrwrite_index_update)
+		  __entry->no_nrwrite_index_update,
+		  (unsigned long) __entry->writeback_index)
 );
 
 TRACE_EVENT(ext4_da_write_begin,
@@ -737,6 +744,169 @@
 		  __entry->data_blocks, __entry->meta_blocks)
 );
 
+TRACE_EVENT(ext4_mballoc_alloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u16,	found			)
+		__field(	__u16,	groups			)
+		__field(	__u16,	buddy			)
+		__field(	__u16,	flags			)
+		__field(	__u16,	tail			)
+		__field(	__u8,	cr			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	goal_logical		)
+		__field(	  int,	goal_start		)
+		__field(	__u32, 	goal_group		)
+		__field(	  int,	goal_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->found		= ac->ac_found;
+		__entry->flags		= ac->ac_flags;
+		__entry->groups		= ac->ac_groups_scanned;
+		__entry->buddy		= ac->ac_buddy;
+		__entry->tail		= ac->ac_tail;
+		__entry->cr		= ac->ac_criteria;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->goal_logical	= ac->ac_g_ex.fe_logical;
+		__entry->goal_start	= ac->ac_g_ex.fe_start;
+		__entry->goal_group	= ac->ac_g_ex.fe_group;
+		__entry->goal_len	= ac->ac_g_ex.fe_len;
+		__entry->result_logical	= ac->ac_f_ex.fe_logical;
+		__entry->result_start	= ac->ac_f_ex.fe_start;
+		__entry->result_group	= ac->ac_f_ex.fe_group;
+		__entry->result_len	= ac->ac_f_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u goal %u/%d/%u@%u "
+		  "result %u/%d/%u@%u blks %u grps %u cr %u flags 0x%04x "
+		  "tail %u broken %u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->goal_group, __entry->goal_start,
+		  __entry->goal_len, __entry->goal_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical,
+		  __entry->found, __entry->groups, __entry->cr,
+		  __entry->flags, __entry->tail,
+		  __entry->buddy ? 1 << __entry->buddy : 0)
+);
+
+TRACE_EVENT(ext4_mballoc_prealloc,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	orig_logical		)
+		__field(	  int,	orig_start		)
+		__field(	__u32, 	orig_group		)
+		__field(	  int,	orig_len		)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->orig_logical	= ac->ac_o_ex.fe_logical;
+		__entry->orig_start	= ac->ac_o_ex.fe_start;
+		__entry->orig_group	= ac->ac_o_ex.fe_group;
+		__entry->orig_len	= ac->ac_o_ex.fe_len;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu orig %u/%d/%u@%u result %u/%d/%u@%u",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->orig_group, __entry->orig_start,
+		  __entry->orig_len, __entry->orig_logical,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_discard,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
+TRACE_EVENT(ext4_mballoc_free,
+	TP_PROTO(struct ext4_allocation_context *ac),
+
+	TP_ARGS(ac),
+
+	TP_STRUCT__entry(
+		__field(	dev_t,	dev			)
+		__field(	ino_t,	ino			)
+		__field(	__u32, 	result_logical		)
+		__field(	  int,	result_start		)
+		__field(	__u32, 	result_group		)
+		__field(	  int,	result_len		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= ac->ac_inode->i_sb->s_dev;
+		__entry->ino		= ac->ac_inode->i_ino;
+		__entry->result_logical	= ac->ac_b_ex.fe_logical;
+		__entry->result_start	= ac->ac_b_ex.fe_start;
+		__entry->result_group	= ac->ac_b_ex.fe_group;
+		__entry->result_len	= ac->ac_b_ex.fe_len;
+	),
+
+	TP_printk("dev %s inode %lu extent %u/%d/%u@%u ",
+		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino,
+		  __entry->result_group, __entry->result_start,
+		  __entry->result_len, __entry->result_logical)
+);
+
 #endif /* _TRACE_EXT4_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/jbd2.h b/include/trace/events/jbd2.h
index b851f0b..3c60b75 100644
--- a/include/trace/events/jbd2.h
+++ b/include/trace/events/jbd2.h
@@ -7,6 +7,9 @@
 #include <linux/jbd2.h>
 #include <linux/tracepoint.h>
 
+struct transaction_chp_stats_s;
+struct transaction_run_stats_s;
+
 TRACE_EVENT(jbd2_checkpoint,
 
 	TP_PROTO(journal_t *journal, int result),
@@ -162,6 +165,81 @@
 		  jbd2_dev_to_name(__entry->dev), (unsigned long) __entry->ino)
 );
 
+TRACE_EVENT(jbd2_run_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_run_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	wait		)
+		__field(	unsigned long,	running		)
+		__field(	unsigned long,	locked		)
+		__field(	unsigned long,	flushing	)
+		__field(	unsigned long,	logging		)
+		__field(		__u32,	handle_count	)
+		__field(		__u32,	blocks		)
+		__field(		__u32,	blocks_logged	)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->wait		= stats->rs_wait;
+		__entry->running	= stats->rs_running;
+		__entry->locked		= stats->rs_locked;
+		__entry->flushing	= stats->rs_flushing;
+		__entry->logging	= stats->rs_logging;
+		__entry->handle_count	= stats->rs_handle_count;
+		__entry->blocks		= stats->rs_blocks;
+		__entry->blocks_logged	= stats->rs_blocks_logged;
+	),
+
+	TP_printk("dev %s tid %lu wait %u running %u locked %u flushing %u "
+		  "logging %u handle_count %u blocks %u blocks_logged %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->wait),
+		  jiffies_to_msecs(__entry->running),
+		  jiffies_to_msecs(__entry->locked),
+		  jiffies_to_msecs(__entry->flushing),
+		  jiffies_to_msecs(__entry->logging),
+		  __entry->handle_count, __entry->blocks,
+		  __entry->blocks_logged)
+);
+
+TRACE_EVENT(jbd2_checkpoint_stats,
+	TP_PROTO(dev_t dev, unsigned long tid,
+		 struct transaction_chp_stats_s *stats),
+
+	TP_ARGS(dev, tid, stats),
+
+	TP_STRUCT__entry(
+		__field(		dev_t,	dev		)
+		__field(	unsigned long,	tid		)
+		__field(	unsigned long,	chp_time	)
+		__field(		__u32,	forced_to_close	)
+		__field(		__u32,	written		)
+		__field(		__u32,	dropped		)
+	),
+
+	TP_fast_assign(
+		__entry->dev		= dev;
+		__entry->tid		= tid;
+		__entry->chp_time	= stats->cs_chp_time;
+		__entry->forced_to_close= stats->cs_forced_to_close;
+		__entry->written	= stats->cs_written;
+		__entry->dropped	= stats->cs_dropped;
+	),
+
+	TP_printk("dev %s tid %lu chp_time %u forced_to_close %u "
+		  "written %u dropped %u",
+		  jbd2_dev_to_name(__entry->dev), __entry->tid,
+		  jiffies_to_msecs(__entry->chp_time),
+		  __entry->forced_to_close, __entry->written, __entry->dropped)
+);
+
 #endif /* _TRACE_JBD2_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/workqueue.h b/include/trace/events/workqueue.h
index fcfd9a1..e4612db 100644
--- a/include/trace/events/workqueue.h
+++ b/include/trace/events/workqueue.h
@@ -26,7 +26,7 @@
 		__entry->func		= work->func;
 	),
 
-	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
 		__entry->thread_pid, __entry->func)
 );
 
@@ -48,7 +48,7 @@
 		__entry->func		= work->func;
 	),
 
-	TP_printk("thread=%s:%d func=%pF", __entry->thread_comm,
+	TP_printk("thread=%s:%d func=%pf", __entry->thread_comm,
 		__entry->thread_pid, __entry->func)
 );
 
diff --git a/ipc/shm.c b/ipc/shm.c
index 9eb1488..464694e 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -55,7 +55,7 @@
 #define shm_file_data(file) (*((struct shm_file_data **)&(file)->private_data))
 
 static const struct file_operations shm_file_operations;
-static struct vm_operations_struct shm_vm_ops;
+static const struct vm_operations_struct shm_vm_ops;
 
 #define shm_ids(ns)	((ns)->ids[IPC_SHM_IDS])
 
@@ -312,7 +312,7 @@
 	.get_unmapped_area	= shm_get_unmapped_area,
 };
 
-static struct vm_operations_struct shm_vm_ops = {
+static const struct vm_operations_struct shm_vm_ops = {
 	.open	= shm_open,	/* callback for a new vm-area open */
 	.close	= shm_close,	/* callback for when the vm-area is released */
 	.fault	= shm_fault,
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 7ccba4b..ca83b73 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -703,7 +703,7 @@
 static int cgroup_rmdir(struct inode *unused_dir, struct dentry *dentry);
 static int cgroup_populate_dir(struct cgroup *cgrp);
 static const struct inode_operations cgroup_dir_inode_operations;
-static struct file_operations proc_cgroupstats_operations;
+static const struct file_operations proc_cgroupstats_operations;
 
 static struct backing_dev_info cgroup_backing_dev_info = {
 	.name		= "cgroup",
@@ -1863,7 +1863,7 @@
 	return single_release(inode, file);
 }
 
-static struct file_operations cgroup_seqfile_operations = {
+static const struct file_operations cgroup_seqfile_operations = {
 	.read = seq_read,
 	.write = cgroup_file_write,
 	.llseek = seq_lseek,
@@ -1922,7 +1922,7 @@
 	return simple_rename(old_dir, old_dentry, new_dir, new_dentry);
 }
 
-static struct file_operations cgroup_file_operations = {
+static const struct file_operations cgroup_file_operations = {
 	.read = cgroup_file_read,
 	.write = cgroup_file_write,
 	.llseek = generic_file_llseek,
@@ -3369,7 +3369,7 @@
 	return single_open(file, proc_cgroup_show, pid);
 }
 
-struct file_operations proc_cgroup_operations = {
+const struct file_operations proc_cgroup_operations = {
 	.open		= cgroup_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
@@ -3398,7 +3398,7 @@
 	return single_open(file, proc_cgroupstats_show, NULL);
 }
 
-static struct file_operations proc_cgroupstats_operations = {
+static const struct file_operations proc_cgroupstats_operations = {
 	.open = cgroupstats_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -3708,8 +3708,10 @@
 void __css_put(struct cgroup_subsys_state *css)
 {
 	struct cgroup *cgrp = css->cgroup;
+	int val;
 	rcu_read_lock();
-	if (atomic_dec_return(&css->refcnt) == 1) {
+	val = atomic_dec_return(&css->refcnt);
+	if (val == 1) {
 		if (notify_on_release(cgrp)) {
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
 			check_for_release(cgrp);
@@ -3717,6 +3719,7 @@
 		cgroup_wakeup_rmdir_waiter(cgrp);
 	}
 	rcu_read_unlock();
+	WARN_ON_ONCE(val < 1);
 }
 
 /*
diff --git a/kernel/futex.c b/kernel/futex.c
index 248dd11..b911adc 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -89,36 +89,36 @@
 	union futex_key key;
 };
 
-/*
- * We use this hashed waitqueue instead of a normal wait_queue_t, so
+/**
+ * struct futex_q - The hashed futex queue entry, one per waiting task
+ * @task:		the task waiting on the futex
+ * @lock_ptr:		the hash bucket lock
+ * @key:		the key the futex is hashed on
+ * @pi_state:		optional priority inheritance state
+ * @rt_waiter:		rt_waiter storage for use with requeue_pi
+ * @requeue_pi_key:	the requeue_pi target futex key
+ * @bitset:		bitset for the optional bitmasked wakeup
+ *
+ * We use this hashed waitqueue, instead of a normal wait_queue_t, so
  * we can wake only the relevant ones (hashed queues may be shared).
  *
  * A futex_q has a woken state, just like tasks have TASK_RUNNING.
  * It is considered woken when plist_node_empty(&q->list) || q->lock_ptr == 0.
  * The order of wakup is always to make the first condition true, then
- * wake up q->waiter, then make the second condition true.
+ * the second.
+ *
+ * PI futexes are typically woken before they are removed from the hash list via
+ * the rt_mutex code. See unqueue_me_pi().
  */
 struct futex_q {
 	struct plist_node list;
-	/* Waiter reference */
+
 	struct task_struct *task;
-
-	/* Which hash list lock to use: */
 	spinlock_t *lock_ptr;
-
-	/* Key which the futex is hashed on: */
 	union futex_key key;
-
-	/* Optional priority inheritance state: */
 	struct futex_pi_state *pi_state;
-
-	/* rt_waiter storage for requeue_pi: */
 	struct rt_mutex_waiter *rt_waiter;
-
-	/* The expected requeue pi target futex key: */
 	union futex_key *requeue_pi_key;
-
-	/* Bitset for the optional bitmasked wakeup */
 	u32 bitset;
 };
 
@@ -198,11 +198,12 @@
 }
 
 /**
- * get_futex_key - Get parameters which are the keys for a futex.
- * @uaddr: virtual address of the futex
- * @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
- * @key: address where result is stored.
- * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
+ * get_futex_key() - Get parameters which are the keys for a futex
+ * @uaddr:	virtual address of the futex
+ * @fshared:	0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
+ * @key:	address where result is stored.
+ * @rw:		mapping needs to be read/write (values: VERIFY_READ,
+ * 		VERIFY_WRITE)
  *
  * Returns a negative error code or 0
  * The key words are stored in *key on success.
@@ -288,8 +289,8 @@
 	drop_futex_key_refs(key);
 }
 
-/*
- * fault_in_user_writeable - fault in user address and verify RW access
+/**
+ * fault_in_user_writeable() - Fault in user address and verify RW access
  * @uaddr:	pointer to faulting user space address
  *
  * Slow path to fixup the fault we just took in the atomic write
@@ -309,8 +310,8 @@
 
 /**
  * futex_top_waiter() - Return the highest priority waiter on a futex
- * @hb:     the hash bucket the futex_q's reside in
- * @key:    the futex key (to distinguish it from other futex futex_q's)
+ * @hb:		the hash bucket the futex_q's reside in
+ * @key:	the futex key (to distinguish it from other futex futex_q's)
  *
  * Must be called with the hb lock held.
  */
@@ -588,7 +589,7 @@
 }
 
 /**
- * futex_lock_pi_atomic() - atomic work required to acquire a pi aware futex
+ * futex_lock_pi_atomic() - Atomic work required to acquire a pi aware futex
  * @uaddr:		the pi futex user address
  * @hb:			the pi futex hash bucket
  * @key:		the futex key associated with uaddr and hb
@@ -1011,9 +1012,9 @@
 
 /**
  * requeue_pi_wake_futex() - Wake a task that acquired the lock during requeue
- * q:	the futex_q
- * key:	the key of the requeue target futex
- * hb:  the hash_bucket of the requeue target futex
+ * @q:		the futex_q
+ * @key:	the key of the requeue target futex
+ * @hb:		the hash_bucket of the requeue target futex
  *
  * During futex_requeue, with requeue_pi=1, it is possible to acquire the
  * target futex if it is uncontended or via a lock steal.  Set the futex_q key
@@ -1350,6 +1351,25 @@
 	return hb;
 }
 
+static inline void
+queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
+{
+	spin_unlock(&hb->lock);
+	drop_futex_key_refs(&q->key);
+}
+
+/**
+ * queue_me() - Enqueue the futex_q on the futex_hash_bucket
+ * @q:	The futex_q to enqueue
+ * @hb:	The destination hash bucket
+ *
+ * The hb->lock must be held by the caller, and is released here. A call to
+ * queue_me() is typically paired with exactly one call to unqueue_me().  The
+ * exceptions involve the PI related operations, which may use unqueue_me_pi()
+ * or nothing if the unqueue is done as part of the wake process and the unqueue
+ * state is implicit in the state of woken task (see futex_wait_requeue_pi() for
+ * an example).
+ */
 static inline void queue_me(struct futex_q *q, struct futex_hash_bucket *hb)
 {
 	int prio;
@@ -1373,19 +1393,17 @@
 	spin_unlock(&hb->lock);
 }
 
-static inline void
-queue_unlock(struct futex_q *q, struct futex_hash_bucket *hb)
-{
-	spin_unlock(&hb->lock);
-	drop_futex_key_refs(&q->key);
-}
-
-/*
- * queue_me and unqueue_me must be called as a pair, each
- * exactly once.  They are called with the hashed spinlock held.
+/**
+ * unqueue_me() - Remove the futex_q from its futex_hash_bucket
+ * @q:	The futex_q to unqueue
+ *
+ * The q->lock_ptr must not be held by the caller. A call to unqueue_me() must
+ * be paired with exactly one earlier call to queue_me().
+ *
+ * Returns:
+ *   1 - if the futex_q was still queued (and we removed unqueued it)
+ *   0 - if the futex_q was already removed by the waking thread
  */
-
-/* Return 1 if we were still queued (ie. 0 means we were woken) */
 static int unqueue_me(struct futex_q *q)
 {
 	spinlock_t *lock_ptr;
@@ -1638,17 +1656,14 @@
 static void futex_wait_queue_me(struct futex_hash_bucket *hb, struct futex_q *q,
 				struct hrtimer_sleeper *timeout)
 {
-	queue_me(q, hb);
-
 	/*
-	 * There might have been scheduling since the queue_me(), as we
-	 * cannot hold a spinlock across the get_user() in case it
-	 * faults, and we cannot just set TASK_INTERRUPTIBLE state when
-	 * queueing ourselves into the futex hash. This code thus has to
-	 * rely on the futex_wake() code removing us from hash when it
-	 * wakes us up.
+	 * The task state is guaranteed to be set before another task can
+	 * wake it. set_current_state() is implemented using set_mb() and
+	 * queue_me() calls spin_unlock() upon completion, both serializing
+	 * access to the hash list and forcing another memory barrier.
 	 */
 	set_current_state(TASK_INTERRUPTIBLE);
+	queue_me(q, hb);
 
 	/* Arm the timer */
 	if (timeout) {
@@ -1658,8 +1673,8 @@
 	}
 
 	/*
-	 * !plist_node_empty() is safe here without any lock.
-	 * q.lock_ptr != 0 is not safe, because of ordering against wakeup.
+	 * If we have been removed from the hash list, then another task
+	 * has tried to wake us, and we can skip the call to schedule().
 	 */
 	if (likely(!plist_node_empty(&q->list))) {
 		/*
@@ -2114,12 +2129,12 @@
 
 /**
  * futex_wait_requeue_pi() - Wait on uaddr and take uaddr2
- * @uaddr:	the futex we initialyl wait on (non-pi)
+ * @uaddr:	the futex we initially wait on (non-pi)
  * @fshared:	whether the futexes are shared (1) or not (0).  They must be
  * 		the same type, no requeueing from private to shared, etc.
  * @val:	the expected value of uaddr
  * @abs_time:	absolute timeout
- * @bitset:	32 bit wakeup bitset set by userspace, defaults to all.
+ * @bitset:	32 bit wakeup bitset set by userspace, defaults to all
  * @clockrt:	whether to use CLOCK_REALTIME (1) or CLOCK_MONOTONIC (0)
  * @uaddr2:	the pi futex we will take prior to returning to user-space
  *
@@ -2246,7 +2261,7 @@
 		res = fixup_owner(uaddr2, fshared, &q, !ret);
 		/*
 		 * If fixup_owner() returned an error, proprogate that.  If it
-		 * acquired the lock, clear our -ETIMEDOUT or -EINTR.
+		 * acquired the lock, clear -ETIMEDOUT or -EINTR.
 		 */
 		if (res)
 			ret = (res < 0) ? res : 0;
@@ -2302,9 +2317,9 @@
  */
 
 /**
- * sys_set_robust_list - set the robust-futex list head of a task
- * @head: pointer to the list-head
- * @len: length of the list-head, as userspace expects
+ * sys_set_robust_list() - Set the robust-futex list head of a task
+ * @head:	pointer to the list-head
+ * @len:	length of the list-head, as userspace expects
  */
 SYSCALL_DEFINE2(set_robust_list, struct robust_list_head __user *, head,
 		size_t, len)
@@ -2323,10 +2338,10 @@
 }
 
 /**
- * sys_get_robust_list - get the robust-futex list head of a task
- * @pid: pid of the process [zero for current task]
- * @head_ptr: pointer to a list-head pointer, the kernel fills it in
- * @len_ptr: pointer to a length field, the kernel fills in the header size
+ * sys_get_robust_list() - Get the robust-futex list head of a task
+ * @pid:	pid of the process [zero for current task]
+ * @head_ptr:	pointer to a list-head pointer, the kernel fills it in
+ * @len_ptr:	pointer to a length field, the kernel fills in the header size
  */
 SYSCALL_DEFINE3(get_robust_list, int, pid,
 		struct robust_list_head __user * __user *, head_ptr,
diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c
index e5d98ce..6d70204 100644
--- a/kernel/hrtimer.c
+++ b/kernel/hrtimer.c
@@ -509,13 +509,14 @@
  * next event
  * Called with interrupts disabled and base->lock held
  */
-static void hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base)
+static void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
 {
 	int i;
 	struct hrtimer_clock_base *base = cpu_base->clock_base;
-	ktime_t expires;
+	ktime_t expires, expires_next;
 
-	cpu_base->expires_next.tv64 = KTIME_MAX;
+	expires_next.tv64 = KTIME_MAX;
 
 	for (i = 0; i < HRTIMER_MAX_CLOCK_BASES; i++, base++) {
 		struct hrtimer *timer;
@@ -531,10 +532,15 @@
 		 */
 		if (expires.tv64 < 0)
 			expires.tv64 = 0;
-		if (expires.tv64 < cpu_base->expires_next.tv64)
-			cpu_base->expires_next = expires;
+		if (expires.tv64 < expires_next.tv64)
+			expires_next = expires;
 	}
 
+	if (skip_equal && expires_next.tv64 == cpu_base->expires_next.tv64)
+		return;
+
+	cpu_base->expires_next.tv64 = expires_next.tv64;
+
 	if (cpu_base->expires_next.tv64 != KTIME_MAX)
 		tick_program_event(cpu_base->expires_next, 1);
 }
@@ -617,7 +623,7 @@
 	base->clock_base[CLOCK_REALTIME].offset =
 		timespec_to_ktime(realtime_offset);
 
-	hrtimer_force_reprogram(base);
+	hrtimer_force_reprogram(base, 0);
 	spin_unlock(&base->lock);
 }
 
@@ -730,7 +736,8 @@
 static inline int hrtimer_hres_active(void) { return 0; }
 static inline int hrtimer_is_hres_enabled(void) { return 0; }
 static inline int hrtimer_switch_to_hres(void) { return 0; }
-static inline void hrtimer_force_reprogram(struct hrtimer_cpu_base *base) { }
+static inline void
+hrtimer_force_reprogram(struct hrtimer_cpu_base *base, int skip_equal) { }
 static inline int hrtimer_enqueue_reprogram(struct hrtimer *timer,
 					    struct hrtimer_clock_base *base,
 					    int wakeup)
@@ -873,19 +880,29 @@
 			     struct hrtimer_clock_base *base,
 			     unsigned long newstate, int reprogram)
 {
-	if (timer->state & HRTIMER_STATE_ENQUEUED) {
-		/*
-		 * Remove the timer from the rbtree and replace the
-		 * first entry pointer if necessary.
-		 */
-		if (base->first == &timer->node) {
-			base->first = rb_next(&timer->node);
-			/* Reprogram the clock event device. if enabled */
-			if (reprogram && hrtimer_hres_active())
-				hrtimer_force_reprogram(base->cpu_base);
+	if (!(timer->state & HRTIMER_STATE_ENQUEUED))
+		goto out;
+
+	/*
+	 * Remove the timer from the rbtree and replace the first
+	 * entry pointer if necessary.
+	 */
+	if (base->first == &timer->node) {
+		base->first = rb_next(&timer->node);
+#ifdef CONFIG_HIGH_RES_TIMERS
+		/* Reprogram the clock event device. if enabled */
+		if (reprogram && hrtimer_hres_active()) {
+			ktime_t expires;
+
+			expires = ktime_sub(hrtimer_get_expires(timer),
+					    base->offset);
+			if (base->cpu_base->expires_next.tv64 == expires.tv64)
+				hrtimer_force_reprogram(base->cpu_base, 1);
 		}
-		rb_erase(&timer->node, &base->active);
+#endif
 	}
+	rb_erase(&timer->node, &base->active);
+out:
 	timer->state = newstate;
 }
 
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index cfadc12..5240d75 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -1333,7 +1333,7 @@
 	return seq_open(filp, &kprobes_seq_ops);
 }
 
-static struct file_operations debugfs_kprobes_operations = {
+static const struct file_operations debugfs_kprobes_operations = {
 	.open           = kprobes_open,
 	.read           = seq_read,
 	.llseek         = seq_lseek,
@@ -1515,7 +1515,7 @@
 	return count;
 }
 
-static struct file_operations fops_kp = {
+static const struct file_operations fops_kp = {
 	.read =         read_enabled_file_bool,
 	.write =        write_enabled_file_bool,
 };
diff --git a/kernel/module.c b/kernel/module.c
index 5a29397..8b7d880 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1992,12 +1992,14 @@
 					  Elf_Shdr *sechdrs,
 					  unsigned int symindex,
 					  unsigned int strindex,
-					  const Elf_Hdr *hdr,
+					  const Elf_Ehdr *hdr,
 					  const char *secstrings,
 					  unsigned long *pstroffs,
 					  unsigned long *strmap)
 {
+	return 0;
 }
+
 static inline void add_kallsyms(struct module *mod,
 				Elf_Shdr *sechdrs,
 				unsigned int shnum,
@@ -2081,9 +2083,8 @@
 	struct module *mod;
 	long err = 0;
 	void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */
-#ifdef CONFIG_KALLSYMS
 	unsigned long symoffs, stroffs, *strmap;
-#endif
+
 	mm_segment_t old_fs;
 
 	DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n",
@@ -3091,7 +3092,6 @@
 		   struct modversion_info *ver,
 		   struct kernel_param *kp,
 		   struct kernel_symbol *ks,
-		   struct marker *marker,
 		   struct tracepoint *tp)
 {
 }
diff --git a/kernel/perf_event.c b/kernel/perf_event.c
index 76ac4db..0f86feb 100644
--- a/kernel/perf_event.c
+++ b/kernel/perf_event.c
@@ -2253,7 +2253,7 @@
 	}
 }
 
-static struct vm_operations_struct perf_mmap_vmops = {
+static const struct vm_operations_struct perf_mmap_vmops = {
 	.open		= perf_mmap_open,
 	.close		= perf_mmap_close,
 	.fault		= perf_mmap_fault,
diff --git a/kernel/rcutree_trace.c b/kernel/rcutree_trace.c
index c89f5e9..179e6ad 100644
--- a/kernel/rcutree_trace.c
+++ b/kernel/rcutree_trace.c
@@ -93,7 +93,7 @@
 	return single_open(file, show_rcudata, NULL);
 }
 
-static struct file_operations rcudata_fops = {
+static const struct file_operations rcudata_fops = {
 	.owner = THIS_MODULE,
 	.open = rcudata_open,
 	.read = seq_read,
@@ -145,7 +145,7 @@
 	return single_open(file, show_rcudata_csv, NULL);
 }
 
-static struct file_operations rcudata_csv_fops = {
+static const struct file_operations rcudata_csv_fops = {
 	.owner = THIS_MODULE,
 	.open = rcudata_csv_open,
 	.read = seq_read,
@@ -196,7 +196,7 @@
 	return single_open(file, show_rcuhier, NULL);
 }
 
-static struct file_operations rcuhier_fops = {
+static const struct file_operations rcuhier_fops = {
 	.owner = THIS_MODULE,
 	.open = rcuhier_open,
 	.read = seq_read,
@@ -222,7 +222,7 @@
 	return single_open(file, show_rcugp, NULL);
 }
 
-static struct file_operations rcugp_fops = {
+static const struct file_operations rcugp_fops = {
 	.owner = THIS_MODULE,
 	.open = rcugp_open,
 	.read = seq_read,
@@ -276,7 +276,7 @@
 	return single_open(file, show_rcu_pending, NULL);
 }
 
-static struct file_operations rcu_pending_fops = {
+static const struct file_operations rcu_pending_fops = {
 	.owner = THIS_MODULE,
 	.open = rcu_pending_open,
 	.read = seq_read,
diff --git a/kernel/relay.c b/kernel/relay.c
index bc18854..760c262 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -60,7 +60,7 @@
 /*
  * vm_ops for relay file mappings.
  */
-static struct vm_operations_struct relay_file_mmap_ops = {
+static const struct vm_operations_struct relay_file_mmap_ops = {
 	.fault = relay_buf_fault,
 	.close = relay_file_mmap_close,
 };
diff --git a/kernel/res_counter.c b/kernel/res_counter.c
index 88faec2..bcdabf3 100644
--- a/kernel/res_counter.c
+++ b/kernel/res_counter.c
@@ -37,27 +37,17 @@
 }
 
 int res_counter_charge(struct res_counter *counter, unsigned long val,
-			struct res_counter **limit_fail_at,
-			struct res_counter **soft_limit_fail_at)
+			struct res_counter **limit_fail_at)
 {
 	int ret;
 	unsigned long flags;
 	struct res_counter *c, *u;
 
 	*limit_fail_at = NULL;
-	if (soft_limit_fail_at)
-		*soft_limit_fail_at = NULL;
 	local_irq_save(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
 		ret = res_counter_charge_locked(c, val);
-		/*
-		 * With soft limits, we return the highest ancestor
-		 * that exceeds its soft limit
-		 */
-		if (soft_limit_fail_at &&
-			!res_counter_soft_limit_check_locked(c))
-			*soft_limit_fail_at = c;
 		spin_unlock(&c->lock);
 		if (ret < 0) {
 			*limit_fail_at = c;
@@ -85,8 +75,7 @@
 	counter->usage -= val;
 }
 
-void res_counter_uncharge(struct res_counter *counter, unsigned long val,
-				bool *was_soft_limit_excess)
+void res_counter_uncharge(struct res_counter *counter, unsigned long val)
 {
 	unsigned long flags;
 	struct res_counter *c;
@@ -94,9 +83,6 @@
 	local_irq_save(flags);
 	for (c = counter; c != NULL; c = c->parent) {
 		spin_lock(&c->lock);
-		if (was_soft_limit_excess)
-			*was_soft_limit_excess =
-				!res_counter_soft_limit_check_locked(c);
 		res_counter_uncharge_locked(c, val);
 		spin_unlock(&c->lock);
 	}
diff --git a/kernel/sched.c b/kernel/sched.c
index ee61f45..1535f38 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -780,7 +780,7 @@
 	return single_open(filp, sched_feat_show, NULL);
 }
 
-static struct file_operations sched_feat_fops = {
+static const struct file_operations sched_feat_fops = {
 	.open		= sched_feat_open,
 	.write		= sched_feat_write,
 	.read		= seq_read,
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index ac2e1dc..479ce56 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -127,7 +127,7 @@
 	clock = wrap_max(clock, min_clock);
 	clock = wrap_min(clock, max_clock);
 
-	if (cmpxchg(&scd->clock, old_clock, clock) != old_clock)
+	if (cmpxchg64(&scd->clock, old_clock, clock) != old_clock)
 		goto again;
 
 	return clock;
@@ -163,7 +163,7 @@
 		val = remote_clock;
 	}
 
-	if (cmpxchg(ptr, old_val, val) != old_val)
+	if (cmpxchg64(ptr, old_val, val) != old_val)
 		goto again;
 
 	return val;
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index e06d0b8..f050ba8 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -48,8 +48,10 @@
 cond_syscall(sys_sendmsg);
 cond_syscall(compat_sys_sendmsg);
 cond_syscall(sys_recvmsg);
+cond_syscall(sys_recvmmsg);
 cond_syscall(compat_sys_recvmsg);
 cond_syscall(compat_sys_recvfrom);
+cond_syscall(compat_sys_recvmmsg);
 cond_syscall(sys_socketcall);
 cond_syscall(sys_futex);
 cond_syscall(compat_sys_futex);
diff --git a/kernel/time/clocksource.c b/kernel/time/clocksource.c
index 0911334..5e18c6a 100644
--- a/kernel/time/clocksource.c
+++ b/kernel/time/clocksource.c
@@ -394,15 +394,11 @@
 {
 	struct clocksource *cs;
 
-	mutex_lock(&clocksource_mutex);
-
 	list_for_each_entry(cs, &clocksource_list, list)
 		if (cs->resume)
 			cs->resume();
 
 	clocksource_resume_watchdog();
-
-	mutex_unlock(&clocksource_mutex);
 }
 
 /**
diff --git a/kernel/time/timer_list.c b/kernel/time/timer_list.c
index fddd69d..1b5b7aa 100644
--- a/kernel/time/timer_list.c
+++ b/kernel/time/timer_list.c
@@ -275,7 +275,7 @@
 	return single_open(filp, timer_list_show, NULL);
 }
 
-static struct file_operations timer_list_fops = {
+static const struct file_operations timer_list_fops = {
 	.open		= timer_list_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
diff --git a/kernel/time/timer_stats.c b/kernel/time/timer_stats.c
index 4cde8b9..ee5681f 100644
--- a/kernel/time/timer_stats.c
+++ b/kernel/time/timer_stats.c
@@ -395,7 +395,7 @@
 	return single_open(filp, tstats_show, NULL);
 }
 
-static struct file_operations tstats_fops = {
+static const struct file_operations tstats_fops = {
 	.open		= tstats_open,
 	.read		= seq_read,
 	.write		= tstats_write,
diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c
index 3eb159c..d9d6206 100644
--- a/kernel/trace/blktrace.c
+++ b/kernel/trace/blktrace.c
@@ -856,6 +856,37 @@
 }
 
 /**
+ * blk_add_trace_rq_remap - Add a trace for a request-remap operation
+ * @q:		queue the io is for
+ * @rq:		the source request
+ * @dev:	target device
+ * @from:	source sector
+ *
+ * Description:
+ *     Device mapper remaps request to other devices.
+ *     Add a trace for that action.
+ *
+ **/
+static void blk_add_trace_rq_remap(struct request_queue *q,
+				   struct request *rq, dev_t dev,
+				   sector_t from)
+{
+	struct blk_trace *bt = q->blk_trace;
+	struct blk_io_trace_remap r;
+
+	if (likely(!bt))
+		return;
+
+	r.device_from = cpu_to_be32(dev);
+	r.device_to   = cpu_to_be32(disk_devt(rq->rq_disk));
+	r.sector_from = cpu_to_be64(from);
+
+	__blk_add_trace(bt, blk_rq_pos(rq), blk_rq_bytes(rq),
+			rq_data_dir(rq), BLK_TA_REMAP, !!rq->errors,
+			sizeof(r), &r);
+}
+
+/**
  * blk_add_driver_data - Add binary message with driver-specific data
  * @q:		queue the io is for
  * @rq:		io request
@@ -922,10 +953,13 @@
 	WARN_ON(ret);
 	ret = register_trace_block_remap(blk_add_trace_remap);
 	WARN_ON(ret);
+	ret = register_trace_block_rq_remap(blk_add_trace_rq_remap);
+	WARN_ON(ret);
 }
 
 static void blk_unregister_tracepoints(void)
 {
+	unregister_trace_block_rq_remap(blk_add_trace_rq_remap);
 	unregister_trace_block_remap(blk_add_trace_remap);
 	unregister_trace_block_split(blk_add_trace_split);
 	unregister_trace_block_unplug_io(blk_add_trace_unplug_io);
@@ -1657,6 +1691,11 @@
 	return sysfs_create_group(&dev->kobj, &blk_trace_attr_group);
 }
 
+void blk_trace_remove_sysfs(struct device *dev)
+{
+	sysfs_remove_group(&dev->kobj, &blk_trace_attr_group);
+}
+
 #endif /* CONFIG_BLK_DEV_IO_TRACE */
 
 #ifdef CONFIG_EVENT_TRACING
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index a142579..46592fe 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -1621,8 +1621,10 @@
 		if (!ret) {
 			struct seq_file *m = file->private_data;
 			m->private = iter;
-		} else
+		} else {
+			trace_parser_put(&iter->parser);
 			kfree(iter);
+		}
 	} else
 		file->private_data = iter;
 	mutex_unlock(&ftrace_regex_lock);
@@ -2202,7 +2204,7 @@
 	struct trace_parser *parser;
 	ssize_t ret, read;
 
-	if (!cnt || cnt < 0)
+	if (!cnt)
 		return 0;
 
 	mutex_lock(&ftrace_regex_lock);
@@ -2216,7 +2218,7 @@
 	parser = &iter->parser;
 	read = trace_get_user(parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded(parser) &&
+	if (read >= 0 && trace_parser_loaded(parser) &&
 	    !trace_parser_cont(parser)) {
 		ret = ftrace_process_regex(parser->buffer,
 					   parser->idx, enable);
@@ -2552,8 +2554,7 @@
 		   size_t cnt, loff_t *ppos)
 {
 	struct trace_parser parser;
-	size_t read = 0;
-	ssize_t ret;
+	ssize_t read, ret;
 
 	if (!cnt || cnt < 0)
 		return 0;
@@ -2562,29 +2563,31 @@
 
 	if (ftrace_graph_count >= FTRACE_GRAPH_MAX_FUNCS) {
 		ret = -EBUSY;
-		goto out;
+		goto out_unlock;
 	}
 
 	if (trace_parser_get_init(&parser, FTRACE_BUFF_MAX)) {
 		ret = -ENOMEM;
-		goto out;
+		goto out_unlock;
 	}
 
 	read = trace_get_user(&parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded((&parser))) {
+	if (read >= 0 && trace_parser_loaded((&parser))) {
 		parser.buffer[parser.idx] = 0;
 
 		/* we allow only one expression at a time */
 		ret = ftrace_set_func(ftrace_graph_funcs, &ftrace_graph_count,
 					parser.buffer);
 		if (ret)
-			goto out;
+			goto out_free;
 	}
 
 	ret = read;
- out:
+
+out_free:
 	trace_parser_put(&parser);
+out_unlock:
 	mutex_unlock(&graph_lock);
 
 	return ret;
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 411af37..4506826 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -415,7 +415,7 @@
 
 	/* read the non-space input */
 	while (cnt && !isspace(ch)) {
-		if (parser->idx < parser->size)
+		if (parser->idx < parser->size - 1)
 			parser->buffer[parser->idx++] = ch;
 		else {
 			ret = -EINVAL;
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 6f03c8a..d128f65 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -232,10 +232,9 @@
 		   size_t cnt, loff_t *ppos)
 {
 	struct trace_parser parser;
-	size_t read = 0;
-	ssize_t ret;
+	ssize_t read, ret;
 
-	if (!cnt || cnt < 0)
+	if (!cnt)
 		return 0;
 
 	ret = tracing_update_buffers();
@@ -247,7 +246,7 @@
 
 	read = trace_get_user(&parser, ubuf, cnt, ppos);
 
-	if (trace_parser_loaded((&parser))) {
+	if (read >= 0 && trace_parser_loaded((&parser))) {
 		int set = 1;
 
 		if (*parser.buffer == '!')
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index b91839e..33bed5e 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -1771,7 +1771,7 @@
 		 * advance both strings to next white space
 		 */
 		if (*fmt == '*') {
-			while (!isspace(*fmt) && *fmt)
+			while (!isspace(*fmt) && *fmt != '%' && *fmt)
 				fmt++;
 			while (!isspace(*str) && *str)
 				str++;
diff --git a/mm/Kconfig b/mm/Kconfig
index 2477607..edd300a 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -244,10 +244,12 @@
 	  This value can be changed after boot using the
 	  /proc/sys/vm/mmap_min_addr tunable.
 
+config ARCH_SUPPORTS_MEMORY_FAILURE
+	bool
 
 config MEMORY_FAILURE
 	depends on MMU
-	depends on X86_MCE
+	depends on ARCH_SUPPORTS_MEMORY_FAILURE
 	bool "Enable recovery from hardware memory errors"
 	help
 	  Enables code to recover from some memory failures on systems
diff --git a/mm/Makefile b/mm/Makefile
index 515fd79..ebf8490 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -5,14 +5,14 @@
 mmu-y			:= nommu.o
 mmu-$(CONFIG_MMU)	:= fremap.o highmem.o madvise.o memory.o mincore.o \
 			   mlock.o mmap.o mprotect.o mremap.o msync.o rmap.o \
-			   vmalloc.o
+			   vmalloc.o pagewalk.o
 
 obj-y			:= bootmem.o filemap.o mempool.o oom_kill.o fadvise.o \
 			   maccess.o page_alloc.o page-writeback.o \
 			   readahead.o swap.o truncate.o vmscan.o shmem.o \
 			   prio_tree.o util.o mmzone.o vmstat.o backing-dev.o \
 			   page_isolation.o mm_init.o mmu_context.o \
-			   pagewalk.o $(mmu-y)
+			   $(mmu-y)
 obj-y += init-mm.o
 
 obj-$(CONFIG_BOUNCE)	+= bounce.o
diff --git a/mm/filemap.c b/mm/filemap.c
index 6c84e598..ef169f3 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1611,7 +1611,7 @@
 }
 EXPORT_SYMBOL(filemap_fault);
 
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
 	.fault		= filemap_fault,
 };
 
diff --git a/mm/filemap_xip.c b/mm/filemap_xip.c
index 427dfe3..1888b2d 100644
--- a/mm/filemap_xip.c
+++ b/mm/filemap_xip.c
@@ -296,7 +296,7 @@
 	}
 }
 
-static struct vm_operations_struct xip_file_vm_ops = {
+static const struct vm_operations_struct xip_file_vm_ops = {
 	.fault	= xip_file_fault,
 };
 
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index 6f048fc..5d7601b 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -1721,7 +1721,7 @@
 	return 0;
 }
 
-struct vm_operations_struct hugetlb_vm_ops = {
+const struct vm_operations_struct hugetlb_vm_ops = {
 	.fault = hugetlb_vm_op_fault,
 	.open = hugetlb_vm_op_open,
 	.close = hugetlb_vm_op_close,
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e2b98a6..f99f599 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -313,7 +313,8 @@
 static void
 __mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
 				struct mem_cgroup_per_zone *mz,
-				struct mem_cgroup_tree_per_zone *mctz)
+				struct mem_cgroup_tree_per_zone *mctz,
+				unsigned long long new_usage_in_excess)
 {
 	struct rb_node **p = &mctz->rb_root.rb_node;
 	struct rb_node *parent = NULL;
@@ -322,7 +323,9 @@
 	if (mz->on_tree)
 		return;
 
-	mz->usage_in_excess = res_counter_soft_limit_excess(&mem->res);
+	mz->usage_in_excess = new_usage_in_excess;
+	if (!mz->usage_in_excess)
+		return;
 	while (*p) {
 		parent = *p;
 		mz_node = rb_entry(parent, struct mem_cgroup_per_zone,
@@ -353,16 +356,6 @@
 }
 
 static void
-mem_cgroup_insert_exceeded(struct mem_cgroup *mem,
-				struct mem_cgroup_per_zone *mz,
-				struct mem_cgroup_tree_per_zone *mctz)
-{
-	spin_lock(&mctz->lock);
-	__mem_cgroup_insert_exceeded(mem, mz, mctz);
-	spin_unlock(&mctz->lock);
-}
-
-static void
 mem_cgroup_remove_exceeded(struct mem_cgroup *mem,
 				struct mem_cgroup_per_zone *mz,
 				struct mem_cgroup_tree_per_zone *mctz)
@@ -392,34 +385,36 @@
 
 static void mem_cgroup_update_tree(struct mem_cgroup *mem, struct page *page)
 {
-	unsigned long long prev_usage_in_excess, new_usage_in_excess;
-	bool updated_tree = false;
+	unsigned long long excess;
 	struct mem_cgroup_per_zone *mz;
 	struct mem_cgroup_tree_per_zone *mctz;
-
-	mz = mem_cgroup_zoneinfo(mem, page_to_nid(page), page_zonenum(page));
+	int nid = page_to_nid(page);
+	int zid = page_zonenum(page);
 	mctz = soft_limit_tree_from_page(page);
 
 	/*
-	 * We do updates in lazy mode, mem's are removed
-	 * lazily from the per-zone, per-node rb tree
+	 * Necessary to update all ancestors when hierarchy is used.
+	 * because their event counter is not touched.
 	 */
-	prev_usage_in_excess = mz->usage_in_excess;
-
-	new_usage_in_excess = res_counter_soft_limit_excess(&mem->res);
-	if (prev_usage_in_excess) {
-		mem_cgroup_remove_exceeded(mem, mz, mctz);
-		updated_tree = true;
-	}
-	if (!new_usage_in_excess)
-		goto done;
-	mem_cgroup_insert_exceeded(mem, mz, mctz);
-
-done:
-	if (updated_tree) {
-		spin_lock(&mctz->lock);
-		mz->usage_in_excess = new_usage_in_excess;
-		spin_unlock(&mctz->lock);
+	for (; mem; mem = parent_mem_cgroup(mem)) {
+		mz = mem_cgroup_zoneinfo(mem, nid, zid);
+		excess = res_counter_soft_limit_excess(&mem->res);
+		/*
+		 * We have to update the tree if mz is on RB-tree or
+		 * mem is over its softlimit.
+		 */
+		if (excess || mz->on_tree) {
+			spin_lock(&mctz->lock);
+			/* if on-tree, remove it */
+			if (mz->on_tree)
+				__mem_cgroup_remove_exceeded(mem, mz, mctz);
+			/*
+			 * Insert again. mz->usage_in_excess will be updated.
+			 * If excess is 0, no tree ops.
+			 */
+			__mem_cgroup_insert_exceeded(mem, mz, mctz, excess);
+			spin_unlock(&mctz->lock);
+		}
 	}
 }
 
@@ -447,9 +442,10 @@
 __mem_cgroup_largest_soft_limit_node(struct mem_cgroup_tree_per_zone *mctz)
 {
 	struct rb_node *rightmost = NULL;
-	struct mem_cgroup_per_zone *mz = NULL;
+	struct mem_cgroup_per_zone *mz;
 
 retry:
+	mz = NULL;
 	rightmost = rb_last(&mctz->rb_root);
 	if (!rightmost)
 		goto done;		/* Nothing to reclaim from */
@@ -1270,9 +1266,9 @@
 			gfp_t gfp_mask, struct mem_cgroup **memcg,
 			bool oom, struct page *page)
 {
-	struct mem_cgroup *mem, *mem_over_limit, *mem_over_soft_limit;
+	struct mem_cgroup *mem, *mem_over_limit;
 	int nr_retries = MEM_CGROUP_RECLAIM_RETRIES;
-	struct res_counter *fail_res, *soft_fail_res = NULL;
+	struct res_counter *fail_res;
 
 	if (unlikely(test_thread_flag(TIF_MEMDIE))) {
 		/* Don't account this! */
@@ -1304,17 +1300,16 @@
 
 		if (mem_cgroup_is_root(mem))
 			goto done;
-		ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res,
-						&soft_fail_res);
+		ret = res_counter_charge(&mem->res, PAGE_SIZE, &fail_res);
 		if (likely(!ret)) {
 			if (!do_swap_account)
 				break;
 			ret = res_counter_charge(&mem->memsw, PAGE_SIZE,
-							&fail_res, NULL);
+							&fail_res);
 			if (likely(!ret))
 				break;
 			/* mem+swap counter fails */
-			res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->res, PAGE_SIZE);
 			flags |= MEM_CGROUP_RECLAIM_NOSWAP;
 			mem_over_limit = mem_cgroup_from_res_counter(fail_res,
 									memsw);
@@ -1353,16 +1348,11 @@
 		}
 	}
 	/*
-	 * Insert just the ancestor, we should trickle down to the correct
-	 * cgroup for reclaim, since the other nodes will be below their
-	 * soft limit
+	 * Insert ancestor (and ancestor's ancestors), to softlimit RB-tree.
+	 * if they exceeds softlimit.
 	 */
-	if (soft_fail_res) {
-		mem_over_soft_limit =
-			mem_cgroup_from_res_counter(soft_fail_res, res);
-		if (mem_cgroup_soft_limit_check(mem_over_soft_limit))
-			mem_cgroup_update_tree(mem_over_soft_limit, page);
-	}
+	if (mem_cgroup_soft_limit_check(mem))
+		mem_cgroup_update_tree(mem, page);
 done:
 	return 0;
 nomem:
@@ -1437,10 +1427,9 @@
 	if (unlikely(PageCgroupUsed(pc))) {
 		unlock_page_cgroup(pc);
 		if (!mem_cgroup_is_root(mem)) {
-			res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->res, PAGE_SIZE);
 			if (do_swap_account)
-				res_counter_uncharge(&mem->memsw, PAGE_SIZE,
-							NULL);
+				res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 		}
 		css_put(&mem->css);
 		return;
@@ -1519,7 +1508,7 @@
 		goto out;
 
 	if (!mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&from->res, PAGE_SIZE);
 	mem_cgroup_charge_statistics(from, pc, false);
 
 	page = pc->page;
@@ -1539,7 +1528,7 @@
 	}
 
 	if (do_swap_account && !mem_cgroup_is_root(from))
-		res_counter_uncharge(&from->memsw, PAGE_SIZE, NULL);
+		res_counter_uncharge(&from->memsw, PAGE_SIZE);
 	css_put(&from->css);
 
 	css_get(&to->css);
@@ -1610,9 +1599,9 @@
 	css_put(&parent->css);
 	/* uncharge if move fails */
 	if (!mem_cgroup_is_root(parent)) {
-		res_counter_uncharge(&parent->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&parent->res, PAGE_SIZE);
 		if (do_swap_account)
-			res_counter_uncharge(&parent->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&parent->memsw, PAGE_SIZE);
 	}
 	return ret;
 }
@@ -1803,8 +1792,7 @@
 			 * calling css_tryget
 			 */
 			if (!mem_cgroup_is_root(memcg))
-				res_counter_uncharge(&memcg->memsw, PAGE_SIZE,
-							NULL);
+				res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
 			mem_cgroup_swap_statistics(memcg, false);
 			mem_cgroup_put(memcg);
 		}
@@ -1831,9 +1819,9 @@
 	if (!mem)
 		return;
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE, NULL);
+		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		if (do_swap_account)
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 	}
 	css_put(&mem->css);
 }
@@ -1848,7 +1836,6 @@
 	struct page_cgroup *pc;
 	struct mem_cgroup *mem = NULL;
 	struct mem_cgroup_per_zone *mz;
-	bool soft_limit_excess = false;
 
 	if (mem_cgroup_disabled())
 		return NULL;
@@ -1888,10 +1875,10 @@
 	}
 
 	if (!mem_cgroup_is_root(mem)) {
-		res_counter_uncharge(&mem->res, PAGE_SIZE, &soft_limit_excess);
+		res_counter_uncharge(&mem->res, PAGE_SIZE);
 		if (do_swap_account &&
 				(ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT))
-			res_counter_uncharge(&mem->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&mem->memsw, PAGE_SIZE);
 	}
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
 		mem_cgroup_swap_statistics(mem, true);
@@ -1908,7 +1895,7 @@
 	mz = page_cgroup_zoneinfo(pc);
 	unlock_page_cgroup(pc);
 
-	if (soft_limit_excess && mem_cgroup_soft_limit_check(mem))
+	if (mem_cgroup_soft_limit_check(mem))
 		mem_cgroup_update_tree(mem, page);
 	/* at swapout, this memcg will be accessed to record to swap */
 	if (ctype != MEM_CGROUP_CHARGE_TYPE_SWAPOUT)
@@ -1986,7 +1973,7 @@
 		 * This memcg can be obsolete one. We avoid calling css_tryget
 		 */
 		if (!mem_cgroup_is_root(memcg))
-			res_counter_uncharge(&memcg->memsw, PAGE_SIZE, NULL);
+			res_counter_uncharge(&memcg->memsw, PAGE_SIZE);
 		mem_cgroup_swap_statistics(memcg, false);
 		mem_cgroup_put(memcg);
 	}
@@ -2233,6 +2220,7 @@
 	unsigned long reclaimed;
 	int loop = 0;
 	struct mem_cgroup_tree_per_zone *mctz;
+	unsigned long long excess;
 
 	if (order > 0)
 		return 0;
@@ -2284,9 +2272,8 @@
 					break;
 			} while (1);
 		}
-		mz->usage_in_excess =
-			res_counter_soft_limit_excess(&mz->mem->res);
 		__mem_cgroup_remove_exceeded(mz->mem, mz, mctz);
+		excess = res_counter_soft_limit_excess(&mz->mem->res);
 		/*
 		 * One school of thought says that we should not add
 		 * back the node to the tree if reclaim returns 0.
@@ -2295,8 +2282,8 @@
 		 * memory to reclaim from. Consider this as a longer
 		 * term TODO.
 		 */
-		if (mz->usage_in_excess)
-			__mem_cgroup_insert_exceeded(mz->mem, mz, mctz);
+		/* If excess == 0, no tree ops */
+		__mem_cgroup_insert_exceeded(mz->mem, mz, mctz, excess);
 		spin_unlock(&mctz->lock);
 		css_put(&mz->mem->css);
 		loop++;
diff --git a/mm/mmap.c b/mm/mmap.c
index 21d4029..73f5e4b 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2282,7 +2282,7 @@
 {
 }
 
-static struct vm_operations_struct special_mapping_vmops = {
+static const struct vm_operations_struct special_mapping_vmops = {
 	.close = special_mapping_close,
 	.fault = special_mapping_fault,
 };
diff --git a/mm/nommu.c b/mm/nommu.c
index 56a446f..5189b5a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -79,7 +79,7 @@
 struct rb_root nommu_region_tree = RB_ROOT;
 DECLARE_RWSEM(nommu_region_sem);
 
-struct vm_operations_struct generic_file_vm_ops = {
+const struct vm_operations_struct generic_file_vm_ops = {
 };
 
 /*
@@ -826,7 +826,7 @@
 	int ret;
 
 	/* do the simple checks first */
-	if (flags & MAP_FIXED || addr) {
+	if (flags & MAP_FIXED) {
 		printk(KERN_DEBUG
 		       "%d: Can't do fixed-address/overlay mmap of RAM\n",
 		       current->pid);
@@ -1034,7 +1034,7 @@
 	ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
 	if (ret == 0) {
 		vma->vm_region->vm_top = vma->vm_region->vm_end;
-		return ret;
+		return 0;
 	}
 	if (ret != -ENOSYS)
 		return ret;
@@ -1051,7 +1051,8 @@
  */
 static int do_mmap_private(struct vm_area_struct *vma,
 			   struct vm_region *region,
-			   unsigned long len)
+			   unsigned long len,
+			   unsigned long capabilities)
 {
 	struct page *pages;
 	unsigned long total, point, n, rlen;
@@ -1062,13 +1063,13 @@
 	 * shared mappings on devices or memory
 	 * - VM_MAYSHARE will be set if it may attempt to share
 	 */
-	if (vma->vm_file) {
+	if (capabilities & BDI_CAP_MAP_DIRECT) {
 		ret = vma->vm_file->f_op->mmap(vma->vm_file, vma);
 		if (ret == 0) {
 			/* shouldn't return success if we're not sharing */
 			BUG_ON(!(vma->vm_flags & VM_MAYSHARE));
 			vma->vm_region->vm_top = vma->vm_region->vm_end;
-			return ret;
+			return 0;
 		}
 		if (ret != -ENOSYS)
 			return ret;
@@ -1181,9 +1182,6 @@
 
 	kenter(",%lx,%lx,%lx,%lx,%lx", addr, len, prot, flags, pgoff);
 
-	if (!(flags & MAP_FIXED))
-		addr = round_hint_to_min(addr);
-
 	/* decide whether we should attempt the mapping, and if so what sort of
 	 * mapping */
 	ret = validate_mmap_request(file, addr, len, prot, flags, pgoff,
@@ -1193,6 +1191,9 @@
 		return ret;
 	}
 
+	/* we ignore the address hint */
+	addr = 0;
+
 	/* we've determined that we can make the mapping, now translate what we
 	 * now know into VMA flags */
 	vm_flags = determine_vm_flags(file, prot, flags, capabilities);
@@ -1306,7 +1307,7 @@
 		 * - this is the hook for quasi-memory character devices to
 		 *   tell us the location of a shared mapping
 		 */
-		if (file && file->f_op->get_unmapped_area) {
+		if (capabilities & BDI_CAP_MAP_DIRECT) {
 			addr = file->f_op->get_unmapped_area(file, addr, len,
 							     pgoff, flags);
 			if (IS_ERR((void *) addr)) {
@@ -1330,15 +1331,17 @@
 	}
 
 	vma->vm_region = region;
-	add_nommu_region(region);
 
-	/* set up the mapping */
+	/* set up the mapping
+	 * - the region is filled in if BDI_CAP_MAP_DIRECT is still set
+	 */
 	if (file && vma->vm_flags & VM_SHARED)
 		ret = do_mmap_shared_file(vma);
 	else
-		ret = do_mmap_private(vma, region, len);
+		ret = do_mmap_private(vma, region, len, capabilities);
 	if (ret < 0)
-		goto error_put_region;
+		goto error_just_free;
+	add_nommu_region(region);
 
 	/* okay... we have a mapping; now we have to register it */
 	result = vma->vm_start;
@@ -1356,19 +1359,6 @@
 	kleave(" = %lx", result);
 	return result;
 
-error_put_region:
-	__put_nommu_region(region);
-	if (vma) {
-		if (vma->vm_file) {
-			fput(vma->vm_file);
-			if (vma->vm_flags & VM_EXECUTABLE)
-				removed_exe_file_vma(vma->vm_mm);
-		}
-		kmem_cache_free(vm_area_cachep, vma);
-	}
-	kleave(" = %d [pr]", ret);
-	return ret;
-
 error_just_free:
 	up_write(&nommu_region_sem);
 error:
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index d99664e..a3b1409 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -44,18 +44,21 @@
 /*
  * When balance_dirty_pages decides that the caller needs to perform some
  * non-background writeback, this is how many pages it will attempt to write.
- * It should be somewhat larger than RATELIMIT_PAGES to ensure that reasonably
+ * It should be somewhat larger than dirtied pages to ensure that reasonably
  * large amounts of I/O are submitted.
  */
-static inline long sync_writeback_pages(void)
+static inline long sync_writeback_pages(unsigned long dirtied)
 {
-	return ratelimit_pages + ratelimit_pages / 2;
+	if (dirtied < ratelimit_pages)
+		dirtied = ratelimit_pages;
+
+	return dirtied + dirtied / 2;
 }
 
 /* The following parameters are exported via /proc/sys/vm */
 
 /*
- * Start background writeback (via pdflush) at this percentage
+ * Start background writeback (via writeback threads) at this percentage
  */
 int dirty_background_ratio = 10;
 
@@ -474,10 +477,11 @@
  * balance_dirty_pages() must be called by processes which are generating dirty
  * data.  It looks at the number of dirty pages in the machine and will force
  * the caller to perform writeback if the system is over `vm_dirty_ratio'.
- * If we're over `background_thresh' then pdflush is woken to perform some
- * writeout.
+ * If we're over `background_thresh' then the writeback threads are woken to
+ * perform some writeout.
  */
-static void balance_dirty_pages(struct address_space *mapping)
+static void balance_dirty_pages(struct address_space *mapping,
+				unsigned long write_chunk)
 {
 	long nr_reclaimable, bdi_nr_reclaimable;
 	long nr_writeback, bdi_nr_writeback;
@@ -485,7 +489,6 @@
 	unsigned long dirty_thresh;
 	unsigned long bdi_thresh;
 	unsigned long pages_written = 0;
-	unsigned long write_chunk = sync_writeback_pages();
 	unsigned long pause = 1;
 
 	struct backing_dev_info *bdi = mapping->backing_dev_info;
@@ -579,7 +582,7 @@
 		bdi->dirty_exceeded = 0;
 
 	if (writeback_in_progress(bdi))
-		return;		/* pdflush is already working this queue */
+		return;
 
 	/*
 	 * In laptop mode, we wait until hitting the higher threshold before
@@ -590,10 +593,10 @@
 	 * background_thresh, to keep the amount of dirty memory low.
 	 */
 	if ((laptop_mode && pages_written) ||
-	    (!laptop_mode && ((nr_writeback = global_page_state(NR_FILE_DIRTY)
-					  + global_page_state(NR_UNSTABLE_NFS))
+	    (!laptop_mode && ((global_page_state(NR_FILE_DIRTY)
+			       + global_page_state(NR_UNSTABLE_NFS))
 					  > background_thresh)))
-		bdi_start_writeback(bdi, nr_writeback);
+		bdi_start_writeback(bdi, NULL, 0);
 }
 
 void set_page_dirty_balance(struct page *page, int page_mkwrite)
@@ -640,9 +643,10 @@
 	p =  &__get_cpu_var(bdp_ratelimits);
 	*p += nr_pages_dirtied;
 	if (unlikely(*p >= ratelimit)) {
+		ratelimit = sync_writeback_pages(*p);
 		*p = 0;
 		preempt_enable();
-		balance_dirty_pages(mapping);
+		balance_dirty_pages(mapping, ratelimit);
 		return;
 	}
 	preempt_enable();
diff --git a/mm/percpu.c b/mm/percpu.c
index 43d8cac..4a048ab 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -1043,7 +1043,9 @@
  */
 static void *pcpu_alloc(size_t size, size_t align, bool reserved)
 {
+	static int warn_limit = 10;
 	struct pcpu_chunk *chunk;
+	const char *err;
 	int slot, off;
 
 	if (unlikely(!size || size > PCPU_MIN_UNIT_SIZE || align > PAGE_SIZE)) {
@@ -1059,11 +1061,14 @@
 	if (reserved && pcpu_reserved_chunk) {
 		chunk = pcpu_reserved_chunk;
 		if (size > chunk->contig_hint ||
-		    pcpu_extend_area_map(chunk) < 0)
+		    pcpu_extend_area_map(chunk) < 0) {
+			err = "failed to extend area map of reserved chunk";
 			goto fail_unlock;
+		}
 		off = pcpu_alloc_area(chunk, size, align);
 		if (off >= 0)
 			goto area_found;
+		err = "alloc from reserved chunk failed";
 		goto fail_unlock;
 	}
 
@@ -1080,6 +1085,7 @@
 			case 1:
 				goto restart;	/* pcpu_lock dropped, restart */
 			default:
+				err = "failed to extend area map";
 				goto fail_unlock;
 			}
 
@@ -1093,8 +1099,10 @@
 	spin_unlock_irq(&pcpu_lock);
 
 	chunk = alloc_pcpu_chunk();
-	if (!chunk)
+	if (!chunk) {
+		err = "failed to allocate new chunk";
 		goto fail_unlock_mutex;
+	}
 
 	spin_lock_irq(&pcpu_lock);
 	pcpu_chunk_relocate(chunk, -1);
@@ -1107,6 +1115,7 @@
 	if (pcpu_populate_chunk(chunk, off, size)) {
 		spin_lock_irq(&pcpu_lock);
 		pcpu_free_area(chunk, off);
+		err = "failed to populate";
 		goto fail_unlock;
 	}
 
@@ -1119,6 +1128,13 @@
 	spin_unlock_irq(&pcpu_lock);
 fail_unlock_mutex:
 	mutex_unlock(&pcpu_alloc_mutex);
+	if (warn_limit) {
+		pr_warning("PERCPU: allocation failed, size=%zu align=%zu, "
+			   "%s\n", size, align, err);
+		dump_stack();
+		if (!--warn_limit)
+			pr_info("PERCPU: limit reached, disable warning\n");
+	}
 	return NULL;
 }
 
@@ -1347,6 +1363,10 @@
 	struct pcpu_alloc_info *ai;
 	unsigned int *cpu_map;
 
+	/* this function may be called multiple times */
+	memset(group_map, 0, sizeof(group_map));
+	memset(group_cnt, 0, sizeof(group_map));
+
 	/*
 	 * Determine min_unit_size, alloc_size and max_upa such that
 	 * alloc_size is multiple of atom_size and is the smallest
@@ -1574,6 +1594,7 @@
 int __init pcpu_setup_first_chunk(const struct pcpu_alloc_info *ai,
 				  void *base_addr)
 {
+	static char cpus_buf[4096] __initdata;
 	static int smap[2], dmap[2];
 	size_t dyn_size = ai->dyn_size;
 	size_t size_sum = ai->static_size + ai->reserved_size + dyn_size;
@@ -1585,17 +1606,26 @@
 	int *unit_map;
 	int group, unit, i;
 
+	cpumask_scnprintf(cpus_buf, sizeof(cpus_buf), cpu_possible_mask);
+
+#define PCPU_SETUP_BUG_ON(cond)	do {					\
+	if (unlikely(cond)) {						\
+		pr_emerg("PERCPU: failed to initialize, %s", #cond);	\
+		pr_emerg("PERCPU: cpu_possible_mask=%s\n", cpus_buf);	\
+		pcpu_dump_alloc_info(KERN_EMERG, ai);			\
+		BUG();							\
+	}								\
+} while (0)
+
 	/* sanity checks */
 	BUILD_BUG_ON(ARRAY_SIZE(smap) >= PCPU_DFL_MAP_ALLOC ||
 		     ARRAY_SIZE(dmap) >= PCPU_DFL_MAP_ALLOC);
-	BUG_ON(ai->nr_groups <= 0);
-	BUG_ON(!ai->static_size);
-	BUG_ON(!base_addr);
-	BUG_ON(ai->unit_size < size_sum);
-	BUG_ON(ai->unit_size & ~PAGE_MASK);
-	BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
-
-	pcpu_dump_alloc_info(KERN_DEBUG, ai);
+	PCPU_SETUP_BUG_ON(ai->nr_groups <= 0);
+	PCPU_SETUP_BUG_ON(!ai->static_size);
+	PCPU_SETUP_BUG_ON(!base_addr);
+	PCPU_SETUP_BUG_ON(ai->unit_size < size_sum);
+	PCPU_SETUP_BUG_ON(ai->unit_size & ~PAGE_MASK);
+	PCPU_SETUP_BUG_ON(ai->unit_size < PCPU_MIN_UNIT_SIZE);
 
 	/* process group information and build config tables accordingly */
 	group_offsets = alloc_bootmem(ai->nr_groups * sizeof(group_offsets[0]));
@@ -1604,7 +1634,7 @@
 	unit_off = alloc_bootmem(nr_cpu_ids * sizeof(unit_off[0]));
 
 	for (cpu = 0; cpu < nr_cpu_ids; cpu++)
-		unit_map[cpu] = NR_CPUS;
+		unit_map[cpu] = UINT_MAX;
 	pcpu_first_unit_cpu = NR_CPUS;
 
 	for (group = 0, unit = 0; group < ai->nr_groups; group++, unit += i) {
@@ -1618,8 +1648,9 @@
 			if (cpu == NR_CPUS)
 				continue;
 
-			BUG_ON(cpu > nr_cpu_ids || !cpu_possible(cpu));
-			BUG_ON(unit_map[cpu] != NR_CPUS);
+			PCPU_SETUP_BUG_ON(cpu > nr_cpu_ids);
+			PCPU_SETUP_BUG_ON(!cpu_possible(cpu));
+			PCPU_SETUP_BUG_ON(unit_map[cpu] != UINT_MAX);
 
 			unit_map[cpu] = unit + i;
 			unit_off[cpu] = gi->base_offset + i * ai->unit_size;
@@ -1632,7 +1663,11 @@
 	pcpu_nr_units = unit;
 
 	for_each_possible_cpu(cpu)
-		BUG_ON(unit_map[cpu] == NR_CPUS);
+		PCPU_SETUP_BUG_ON(unit_map[cpu] == UINT_MAX);
+
+	/* we're done parsing the input, undefine BUG macro and dump config */
+#undef PCPU_SETUP_BUG_ON
+	pcpu_dump_alloc_info(KERN_INFO, ai);
 
 	pcpu_nr_groups = ai->nr_groups;
 	pcpu_group_offsets = group_offsets;
@@ -1782,7 +1817,7 @@
 	void *base = (void *)ULONG_MAX;
 	void **areas = NULL;
 	struct pcpu_alloc_info *ai;
-	size_t size_sum, areas_size;
+	size_t size_sum, areas_size, max_distance;
 	int group, i, rc;
 
 	ai = pcpu_build_alloc_info(reserved_size, dyn_size, atom_size,
@@ -1832,8 +1867,24 @@
 	}
 
 	/* base address is now known, determine group base offsets */
-	for (group = 0; group < ai->nr_groups; group++)
+	max_distance = 0;
+	for (group = 0; group < ai->nr_groups; group++) {
 		ai->groups[group].base_offset = areas[group] - base;
+		max_distance = max(max_distance, ai->groups[group].base_offset);
+	}
+	max_distance += ai->unit_size;
+
+	/* warn if maximum distance is further than 75% of vmalloc space */
+	if (max_distance > (VMALLOC_END - VMALLOC_START) * 3 / 4) {
+		pr_warning("PERCPU: max_distance=0x%lx too large for vmalloc "
+			   "space 0x%lx\n",
+			   max_distance, VMALLOC_END - VMALLOC_START);
+#ifdef CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK
+		/* and fail if we have fallback */
+		rc = -EINVAL;
+		goto out_free;
+#endif
+	}
 
 	pr_info("PERCPU: Embedded %zu pages/cpu @%p s%zu r%zu d%zu u%zu\n",
 		PFN_DOWN(size_sum), base, ai->static_size, ai->reserved_size,
diff --git a/mm/rmap.c b/mm/rmap.c
index 28aafe2..dd43373 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -242,8 +242,8 @@
 }
 
 /*
- * At what user virtual address is page expected in vma? checking that the
- * page matches the vma: currently only used on anon pages, by unuse_vma;
+ * At what user virtual address is page expected in vma?
+ * checking that the page matches the vma.
  */
 unsigned long page_address_in_vma(struct page *page, struct vm_area_struct *vma)
 {
diff --git a/mm/shmem.c b/mm/shmem.c
index 98631c2..356dd995 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -218,7 +218,7 @@
 static const struct inode_operations shmem_inode_operations;
 static const struct inode_operations shmem_dir_inode_operations;
 static const struct inode_operations shmem_special_inode_operations;
-static struct vm_operations_struct shmem_vm_ops;
+static const struct vm_operations_struct shmem_vm_ops;
 
 static struct backing_dev_info shmem_backing_dev_info  __read_mostly = {
 	.ra_pages	= 0,	/* No readahead */
@@ -1046,8 +1046,9 @@
 	 * sync from ever calling shmem_writepage; but a stacking filesystem
 	 * may use the ->writepage of its underlying filesystem, in which case
 	 * tmpfs should write out to swap only in response to memory pressure,
-	 * and not for pdflush or sync.  However, in those cases, we do still
-	 * want to check if there's a redundant swappage to be discarded.
+	 * and not for the writeback threads or sync.  However, in those cases,
+	 * we do still want to check if there's a redundant swappage to be
+	 * discarded.
 	 */
 	if (wbc->for_reclaim)
 		swap = get_swap_page();
@@ -2497,7 +2498,7 @@
 	.put_super	= shmem_put_super,
 };
 
-static struct vm_operations_struct shmem_vm_ops = {
+static const struct vm_operations_struct shmem_vm_ops = {
 	.fault		= shmem_fault,
 #ifdef CONFIG_NUMA
 	.set_policy     = shmem_set_policy,
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 4de7f02..a1bc6b9 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1974,12 +1974,14 @@
 		goto bad_swap;
 	}
 
-	if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
-		p->flags |= SWP_SOLIDSTATE;
-		p->cluster_next = 1 + (random32() % p->highest_bit);
+	if (p->bdev) {
+		if (blk_queue_nonrot(bdev_get_queue(p->bdev))) {
+			p->flags |= SWP_SOLIDSTATE;
+			p->cluster_next = 1 + (random32() % p->highest_bit);
+		}
+		if (discard_swap(p) == 0)
+			p->flags |= SWP_DISCARDABLE;
 	}
-	if (discard_swap(p) == 0)
-		p->flags |= SWP_DISCARDABLE;
 
 	mutex_lock(&swapon_mutex);
 	spin_lock(&swap_lock);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 1219ceb..64e43889 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1709,10 +1709,10 @@
  *
  * If the caller is !__GFP_FS then the probability of a failure is reasonably
  * high - the zone may be full of dirty or under-writeback pages, which this
- * caller can't do much about.  We kick pdflush and take explicit naps in the
- * hope that some of these pages can be written.  But if the allocating task
- * holds filesystem locks which prevent writeout this might not work, and the
- * allocation attempt will fail.
+ * caller can't do much about.  We kick the writeback threads and take explicit
+ * naps in the hope that some of these pages can be written.  But if the
+ * allocating task holds filesystem locks which prevent writeout this might not
+ * work, and the allocation attempt will fail.
  *
  * returns:	0, if no pages reclaimed
  * 		else, the number of pages reclaimed
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 8836575..39f8d01 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -140,7 +140,7 @@
 	vlan_group_free(container_of(rcu, struct vlan_group, rcu));
 }
 
-void unregister_vlan_dev(struct net_device *dev)
+void unregister_vlan_dev(struct net_device *dev, struct list_head *head)
 {
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct net_device *real_dev = vlan->real_dev;
@@ -159,12 +159,13 @@
 	if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
 		ops->ndo_vlan_rx_kill_vid(real_dev, vlan_id);
 
-	vlan_group_set_device(grp, vlan_id, NULL);
 	grp->nr_vlans--;
 
-	synchronize_net();
+	vlan_group_set_device(grp, vlan_id, NULL);
+	if (!grp->killall)
+		synchronize_net();
 
-	unregister_netdevice(dev);
+	unregister_netdevice_queue(dev, head);
 
 	/* If the group is now empty, kill off the group. */
 	if (grp->nr_vlans == 0) {
@@ -427,6 +428,7 @@
 	struct vlan_group *grp;
 	int i, flgs;
 	struct net_device *vlandev;
+	LIST_HEAD(list);
 
 	if (is_vlan_dev(dev))
 		__vlan_device_event(dev, event);
@@ -525,6 +527,8 @@
 
 	case NETDEV_UNREGISTER:
 		/* Delete all VLANs for this dev. */
+		grp->killall = 1;
+
 		for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
 			vlandev = vlan_group_get_device(grp, i);
 			if (!vlandev)
@@ -535,8 +539,9 @@
 			if (grp->nr_vlans == 1)
 				i = VLAN_GROUP_ARRAY_LEN;
 
-			unregister_vlan_dev(vlandev);
+			unregister_vlan_dev(vlandev, &list);
 		}
+		unregister_netdevice_many(&list);
 		break;
 	}
 
@@ -642,7 +647,7 @@
 		err = -EPERM;
 		if (!capable(CAP_NET_ADMIN))
 			break;
-		unregister_vlan_dev(dev);
+		unregister_vlan_dev(dev, NULL);
 		err = 0;
 		break;
 
diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h
index 82570bc..68f9290 100644
--- a/net/8021q/vlan.h
+++ b/net/8021q/vlan.h
@@ -82,14 +82,14 @@
 int vlan_check_real_dev(struct net_device *real_dev, u16 vlan_id);
 void vlan_setup(struct net_device *dev);
 int register_vlan_dev(struct net_device *dev);
-void unregister_vlan_dev(struct net_device *dev);
+void unregister_vlan_dev(struct net_device *dev, struct list_head *head);
 
 static inline u32 vlan_get_ingress_priority(struct net_device *dev,
 					    u16 vlan_tci)
 {
 	struct vlan_dev_info *vip = vlan_dev_info(dev);
 
-	return vip->ingress_priority_map[(vlan_tci >> 13) & 0x7];
+	return vip->ingress_priority_map[(vlan_tci >> VLAN_PRIO_SHIFT) & 0x7];
 }
 
 #ifdef CONFIG_VLAN_8021Q_GVRP
diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c
index 7f7de1a..8d5ca2a 100644
--- a/net/8021q/vlan_core.c
+++ b/net/8021q/vlan_core.c
@@ -74,8 +74,9 @@
 }
 EXPORT_SYMBOL(vlan_dev_vlan_id);
 
-static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
-			   unsigned int vlan_tci, struct sk_buff *skb)
+static gro_result_t
+vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp,
+		unsigned int vlan_tci, struct sk_buff *skb)
 {
 	struct sk_buff *p;
 
@@ -101,11 +102,12 @@
 	return GRO_DROP;
 }
 
-int vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
-		     unsigned int vlan_tci, struct sk_buff *skb)
+gro_result_t vlan_gro_receive(struct napi_struct *napi, struct vlan_group *grp,
+			      unsigned int vlan_tci, struct sk_buff *skb)
 {
 	if (netpoll_rx_on(skb))
-		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
+			? GRO_DROP : GRO_NORMAL;
 
 	skb_gro_reset_offset(skb);
 
@@ -113,17 +115,18 @@
 }
 EXPORT_SYMBOL(vlan_gro_receive);
 
-int vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
-		   unsigned int vlan_tci)
+gro_result_t vlan_gro_frags(struct napi_struct *napi, struct vlan_group *grp,
+			    unsigned int vlan_tci)
 {
 	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
-		return NET_RX_DROP;
+		return GRO_DROP;
 
 	if (netpoll_rx_on(skb)) {
 		skb->protocol = eth_type_trans(skb, skb->dev);
-		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci);
+		return vlan_hwaccel_receive_skb(skb, grp, vlan_tci)
+			? GRO_DROP : GRO_NORMAL;
 	}
 
 	return napi_frags_finish(napi, skb,
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4198ec5..790fd55 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -393,7 +393,7 @@
 	struct vlan_dev_info *vlan = vlan_dev_info(dev);
 	struct vlan_priority_tci_mapping *mp = NULL;
 	struct vlan_priority_tci_mapping *np;
-	u32 vlan_qos = (vlan_prio << 13) & 0xE000;
+	u32 vlan_qos = (vlan_prio << VLAN_PRIO_SHIFT) & VLAN_PRIO_MASK;
 
 	/* See if a priority mapping exists.. */
 	mp = vlan->egress_priority_map[skb_prio & 0xF];
@@ -626,6 +626,17 @@
 		rc = ops->ndo_fcoe_disable(real_dev);
 	return rc;
 }
+
+static int vlan_dev_fcoe_get_wwn(struct net_device *dev, u64 *wwn, int type)
+{
+	struct net_device *real_dev = vlan_dev_info(dev)->real_dev;
+	const struct net_device_ops *ops = real_dev->netdev_ops;
+	int rc = -EINVAL;
+
+	if (ops->ndo_fcoe_get_wwn)
+		rc = ops->ndo_fcoe_get_wwn(real_dev, wwn, type);
+	return rc;
+}
 #endif
 
 static void vlan_dev_change_rx_flags(struct net_device *dev, int change)
@@ -791,6 +802,7 @@
 	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
 	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
 	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
+	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 #endif
 };
 
@@ -813,6 +825,7 @@
 	.ndo_fcoe_ddp_done	= vlan_dev_fcoe_ddp_done,
 	.ndo_fcoe_enable	= vlan_dev_fcoe_enable,
 	.ndo_fcoe_disable	= vlan_dev_fcoe_disable,
+	.ndo_fcoe_get_wwn	= vlan_dev_fcoe_get_wwn,
 #endif
 };
 
diff --git a/net/appletalk/ddp.c b/net/appletalk/ddp.c
index b1a4290..4b0ce2e 100644
--- a/net/appletalk/ddp.c
+++ b/net/appletalk/ddp.c
@@ -1021,7 +1021,8 @@
  * Create a socket. Initialise the socket, blank the addresses
  * set the state.
  */
-static int atalk_create(struct net *net, struct socket *sock, int protocol)
+static int atalk_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
@@ -1821,7 +1822,7 @@
 #endif
 
 
-static struct net_proto_family atalk_family_ops = {
+static const struct net_proto_family atalk_family_ops = {
 	.family		= PF_APPLETALK,
 	.create		= atalk_create,
 	.owner		= THIS_MODULE,
diff --git a/net/atm/common.c b/net/atm/common.c
index 950bd16..d61e051 100644
--- a/net/atm/common.c
+++ b/net/atm/common.c
@@ -496,7 +496,7 @@
 	error = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	if (error)
 		return error;
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 	pr_debug("RcvM %d -= %d\n", atomic_read(&sk->sk_rmem_alloc), skb->truesize);
 	atm_return(vcc, skb->truesize);
 	skb_free_datagram(sk, skb);
diff --git a/net/atm/pvc.c b/net/atm/pvc.c
index d4c0245..8d74e62 100644
--- a/net/atm/pvc.c
+++ b/net/atm/pvc.c
@@ -127,7 +127,8 @@
 };
 
 
-static int pvc_create(struct net *net, struct socket *sock,int protocol)
+static int pvc_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	if (net != &init_net)
 		return -EAFNOSUPPORT;
@@ -137,7 +138,7 @@
 }
 
 
-static struct net_proto_family pvc_family_ops = {
+static const struct net_proto_family pvc_family_ops = {
 	.family = PF_ATMPVC,
 	.create = pvc_create,
 	.owner = THIS_MODULE,
diff --git a/net/atm/svc.c b/net/atm/svc.c
index f90d143..c739507 100644
--- a/net/atm/svc.c
+++ b/net/atm/svc.c
@@ -25,7 +25,7 @@
 #include "signaling.h"
 #include "addr.h"
 
-static int svc_create(struct net *net, struct socket *sock,int protocol);
+static int svc_create(struct net *net, struct socket *sock, int protocol, int kern);
 
 /*
  * Note: since all this is still nicely synchronized with the signaling demon,
@@ -330,7 +330,7 @@
 
 	lock_sock(sk);
 
-	error = svc_create(sock_net(sk), newsock,0);
+	error = svc_create(sock_net(sk), newsock, 0, 0);
 	if (error)
 		goto out;
 
@@ -650,7 +650,8 @@
 };
 
 
-static int svc_create(struct net *net, struct socket *sock,int protocol)
+static int svc_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	int error;
 
@@ -666,7 +667,7 @@
 }
 
 
-static struct net_proto_family svc_family_ops = {
+static const struct net_proto_family svc_family_ops = {
 	.family = PF_ATMSVC,
 	.create = svc_create,
 	.owner = THIS_MODULE,
diff --git a/net/ax25/af_ax25.c b/net/ax25/af_ax25.c
index f454607..d6ddfa4 100644
--- a/net/ax25/af_ax25.c
+++ b/net/ax25/af_ax25.c
@@ -369,6 +369,9 @@
 	if (ax25_ctl.digi_count > AX25_MAX_DIGIS)
 		return -EINVAL;
 
+	if (ax25_ctl.arg > ULONG_MAX / HZ && ax25_ctl.cmd != AX25_KILL)
+		return -EINVAL;
+
 	digi.ndigi = ax25_ctl.digi_count;
 	for (k = 0; k < digi.ndigi; k++)
 		digi.calls[k] = ax25_ctl.digi_addr[k];
@@ -418,14 +421,10 @@
 		break;
 
 	case AX25_T3:
-		if (ax25_ctl.arg < 0)
-			goto einval_put;
 		ax25->t3 = ax25_ctl.arg * HZ;
 		break;
 
 	case AX25_IDLE:
-		if (ax25_ctl.arg < 0)
-			goto einval_put;
 		ax25->idle = ax25_ctl.arg * 60 * HZ;
 		break;
 
@@ -800,7 +799,8 @@
 	.obj_size = sizeof(struct sock),
 };
 
-static int ax25_create(struct net *net, struct socket *sock, int protocol)
+static int ax25_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	ax25_cb *ax25;
@@ -1961,7 +1961,7 @@
 
 #endif
 
-static struct net_proto_family ax25_family_ops = {
+static const struct net_proto_family ax25_family_ops = {
 	.family =	PF_AX25,
 	.create =	ax25_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c
index 8cfb5a8..087cc51 100644
--- a/net/bluetooth/af_bluetooth.c
+++ b/net/bluetooth/af_bluetooth.c
@@ -45,7 +45,7 @@
 
 /* Bluetooth sockets */
 #define BT_MAX_PROTO	8
-static struct net_proto_family *bt_proto[BT_MAX_PROTO];
+static const struct net_proto_family *bt_proto[BT_MAX_PROTO];
 static DEFINE_RWLOCK(bt_proto_lock);
 
 static struct lock_class_key bt_lock_key[BT_MAX_PROTO];
@@ -86,7 +86,7 @@
 				bt_key_strings[proto], &bt_lock_key[proto]);
 }
 
-int bt_sock_register(int proto, struct net_proto_family *ops)
+int bt_sock_register(int proto, const struct net_proto_family *ops)
 {
 	int err = 0;
 
@@ -126,7 +126,8 @@
 }
 EXPORT_SYMBOL(bt_sock_unregister);
 
-static int bt_sock_create(struct net *net, struct socket *sock, int proto)
+static int bt_sock_create(struct net *net, struct socket *sock, int proto,
+			  int kern)
 {
 	int err;
 
@@ -144,7 +145,7 @@
 	read_lock(&bt_proto_lock);
 
 	if (bt_proto[proto] && try_module_get(bt_proto[proto]->owner)) {
-		err = bt_proto[proto]->create(net, sock, proto);
+		err = bt_proto[proto]->create(net, sock, proto, kern);
 		bt_sock_reclassify_lock(sock, proto);
 		module_put(bt_proto[proto]->owner);
 	}
@@ -257,7 +258,7 @@
 	skb_reset_transport_header(skb);
 	err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied);
 	if (err == 0)
-		sock_recv_timestamp(msg, sk, skb);
+		sock_recv_ts_and_drops(msg, sk, skb);
 
 	skb_free_datagram(sk, skb);
 
diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c
index e857628..2ff6ac7 100644
--- a/net/bluetooth/bnep/sock.c
+++ b/net/bluetooth/bnep/sock.c
@@ -195,7 +195,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int bnep_sock_create(struct net *net, struct socket *sock, int protocol)
+static int bnep_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -222,7 +223,7 @@
 	return 0;
 }
 
-static struct net_proto_family bnep_sock_family_ops = {
+static const struct net_proto_family bnep_sock_family_ops = {
 	.family = PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create = bnep_sock_create
diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c
index 16b0fad..978cc3a 100644
--- a/net/bluetooth/cmtp/sock.c
+++ b/net/bluetooth/cmtp/sock.c
@@ -190,7 +190,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int cmtp_sock_create(struct net *net, struct socket *sock, int protocol)
+static int cmtp_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -217,7 +218,7 @@
 	return 0;
 }
 
-static struct net_proto_family cmtp_sock_family_ops = {
+static const struct net_proto_family cmtp_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= cmtp_sock_create
diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c
index 75302a9..1ca5c7c 100644
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -621,7 +621,8 @@
 	.obj_size	= sizeof(struct hci_pinfo)
 };
 
-static int hci_sock_create(struct net *net, struct socket *sock, int protocol)
+static int hci_sock_create(struct net *net, struct socket *sock, int protocol,
+			   int kern)
 {
 	struct sock *sk;
 
@@ -687,7 +688,7 @@
 	return NOTIFY_DONE;
 }
 
-static struct net_proto_family hci_sock_family_ops = {
+static const struct net_proto_family hci_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= hci_sock_create,
diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c
index 37c9d7d..9cfef68 100644
--- a/net/bluetooth/hidp/sock.c
+++ b/net/bluetooth/hidp/sock.c
@@ -241,7 +241,8 @@
 	.obj_size	= sizeof(struct bt_sock)
 };
 
-static int hidp_sock_create(struct net *net, struct socket *sock, int protocol)
+static int hidp_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -268,7 +269,7 @@
 	return 0;
 }
 
-static struct net_proto_family hidp_sock_family_ops = {
+static const struct net_proto_family hidp_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= hidp_sock_create
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index 77e9fb1..ff0233d 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -819,7 +819,8 @@
 	return sk;
 }
 
-static int l2cap_sock_create(struct net *net, struct socket *sock, int protocol)
+static int l2cap_sock_create(struct net *net, struct socket *sock, int protocol,
+			     int kern)
 {
 	struct sock *sk;
 
@@ -831,7 +832,7 @@
 			sock->type != SOCK_DGRAM && sock->type != SOCK_RAW)
 		return -ESOCKTNOSUPPORT;
 
-	if (sock->type == SOCK_RAW && !capable(CAP_NET_RAW))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		return -EPERM;
 
 	sock->ops = &l2cap_sock_ops;
@@ -3919,7 +3920,7 @@
 	.getsockopt	= l2cap_sock_getsockopt
 };
 
-static struct net_proto_family l2cap_sock_family_ops = {
+static const struct net_proto_family l2cap_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= l2cap_sock_create,
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 8a20aaf..4b5968d 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -323,7 +323,8 @@
 	return sk;
 }
 
-static int rfcomm_sock_create(struct net *net, struct socket *sock, int protocol)
+static int rfcomm_sock_create(struct net *net, struct socket *sock,
+			      int protocol, int kern)
 {
 	struct sock *sk;
 
@@ -703,7 +704,7 @@
 		copied += chunk;
 		size   -= chunk;
 
-		sock_recv_timestamp(msg, sk, skb);
+		sock_recv_ts_and_drops(msg, sk, skb);
 
 		if (!(flags & MSG_PEEK)) {
 			atomic_sub(chunk, &sk->sk_rmem_alloc);
@@ -1101,7 +1102,7 @@
 	.mmap		= sock_no_mmap
 };
 
-static struct net_proto_family rfcomm_sock_family_ops = {
+static const struct net_proto_family rfcomm_sock_family_ops = {
 	.family		= PF_BLUETOOTH,
 	.owner		= THIS_MODULE,
 	.create		= rfcomm_sock_create
diff --git a/net/bluetooth/sco.c b/net/bluetooth/sco.c
index 77f4153..dd8f6ec 100644
--- a/net/bluetooth/sco.c
+++ b/net/bluetooth/sco.c
@@ -430,7 +430,8 @@
 	return sk;
 }
 
-static int sco_sock_create(struct net *net, struct socket *sock, int protocol)
+static int sco_sock_create(struct net *net, struct socket *sock, int protocol,
+			   int kern)
 {
 	struct sock *sk;
 
@@ -993,7 +994,7 @@
 	.getsockopt	= sco_sock_getsockopt
 };
 
-static struct net_proto_family sco_sock_family_ops = {
+static const struct net_proto_family sco_sock_family_ops = {
 	.family	= PF_BLUETOOTH,
 	.owner	= THIS_MODULE,
 	.create	= sco_sock_create,
diff --git a/net/bridge/br_device.c b/net/bridge/br_device.c
index 07a0777..1a99c4e 100644
--- a/net/bridge/br_device.c
+++ b/net/bridge/br_device.c
@@ -157,6 +157,7 @@
 	.get_tso	= ethtool_op_get_tso,
 	.set_tso	= br_set_tso,
 	.get_ufo	= ethtool_op_get_ufo,
+	.set_ufo	= ethtool_op_set_ufo,
 	.get_flags	= ethtool_op_get_flags,
 };
 
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 4a9f527..a6f74b2 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -154,7 +154,7 @@
 }
 
 /* called with RTNL */
-static void del_br(struct net_bridge *br)
+static void del_br(struct net_bridge *br, struct list_head *head)
 {
 	struct net_bridge_port *p, *n;
 
@@ -165,7 +165,7 @@
 	del_timer_sync(&br->gc_timer);
 
 	br_sysfs_delbr(br->dev);
-	unregister_netdevice(br->dev);
+	unregister_netdevice_queue(br->dev, head);
 }
 
 static struct net_device *new_bridge_dev(struct net *net, const char *name)
@@ -323,7 +323,7 @@
 	}
 
 	else
-		del_br(netdev_priv(dev));
+		del_br(netdev_priv(dev), NULL);
 
 	rtnl_unlock();
 	return ret;
@@ -466,15 +466,14 @@
 void br_net_exit(struct net *net)
 {
 	struct net_device *dev;
+	LIST_HEAD(list);
 
 	rtnl_lock();
-restart:
-	for_each_netdev(net, dev) {
-		if (dev->priv_flags & IFF_EBRIDGE) {
-			del_br(netdev_priv(dev));
-			goto restart;
-		}
-	}
+	for_each_netdev(net, dev)
+		if (dev->priv_flags & IFF_EBRIDGE)
+			del_br(netdev_priv(dev), &list);
+
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
 
 }
diff --git a/net/bridge/br_ioctl.c b/net/bridge/br_ioctl.c
index 6a6433d..2af6e4a 100644
--- a/net/bridge/br_ioctl.c
+++ b/net/bridge/br_ioctl.c
@@ -81,6 +81,7 @@
 	return num;
 }
 
+/* called with RTNL */
 static int add_del_if(struct net_bridge *br, int ifindex, int isadd)
 {
 	struct net_device *dev;
@@ -89,7 +90,7 @@
 	if (!capable(CAP_NET_ADMIN))
 		return -EPERM;
 
-	dev = dev_get_by_index(dev_net(br->dev), ifindex);
+	dev = __dev_get_by_index(dev_net(br->dev), ifindex);
 	if (dev == NULL)
 		return -EINVAL;
 
@@ -98,7 +99,6 @@
 	else
 		ret = br_del_if(br, dev);
 
-	dev_put(dev);
 	return ret;
 }
 
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 6068321..833bd83 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -114,7 +114,8 @@
 	skb_queue_purge(&sk->sk_receive_queue);
 }
 
-static int can_create(struct net *net, struct socket *sock, int protocol)
+static int can_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 	struct can_proto *cp;
@@ -160,11 +161,6 @@
 		goto errout;
 	}
 
-	if (cp->capability >= 0 && !capable(cp->capability)) {
-		err = -EPERM;
-		goto errout;
-	}
-
 	sock->ops = cp->ops;
 
 	sk = sk_alloc(net, PF_CAN, GFP_KERNEL, cp->prot);
@@ -842,7 +838,7 @@
 	.func = can_rcv,
 };
 
-static struct net_proto_family can_family_ops __read_mostly = {
+static const struct net_proto_family can_family_ops = {
 	.family = PF_CAN,
 	.create = can_create,
 	.owner  = THIS_MODULE,
diff --git a/net/can/bcm.c b/net/can/bcm.c
index 597da4f..67b5433 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -1534,7 +1534,7 @@
 		return err;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
 		msg->msg_namelen = sizeof(struct sockaddr_can);
@@ -1576,7 +1576,6 @@
 static struct can_proto bcm_can_proto __read_mostly = {
 	.type       = SOCK_DGRAM,
 	.protocol   = CAN_BCM,
-	.capability = -1,
 	.ops        = &bcm_ops,
 	.prot       = &bcm_proto,
 };
diff --git a/net/can/raw.c b/net/can/raw.c
index b5e8979..abca920 100644
--- a/net/can/raw.c
+++ b/net/can/raw.c
@@ -424,8 +424,6 @@
 
 	if (level != SOL_CAN_RAW)
 		return -EINVAL;
-	if (optlen < 0)
-		return -EINVAL;
 
 	switch (optname) {
 
@@ -702,7 +700,7 @@
 		return err;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name) {
 		msg->msg_namelen = sizeof(struct sockaddr_can);
@@ -744,7 +742,6 @@
 static struct can_proto raw_can_proto __read_mostly = {
 	.type       = SOCK_RAW,
 	.protocol   = CAN_RAW,
-	.capability = -1,
 	.ops        = &raw_ops,
 	.prot       = &raw_proto,
 };
diff --git a/net/compat.c b/net/compat.c
index a407c3a..6a2f75f 100644
--- a/net/compat.c
+++ b/net/compat.c
@@ -390,9 +390,6 @@
 	int err;
 	struct socket *sock;
 
-	if (optlen < 0)
-		return -EINVAL;
-
 	if ((sock = sockfd_lookup(fd, &err))!=NULL)
 	{
 		err = security_socket_setsockopt(sock,level,optname);
@@ -727,10 +724,10 @@
 
 /* Argument list sizes for compat_sys_socketcall */
 #define AL(x) ((x) * sizeof(u32))
-static unsigned char nas[19]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
+static unsigned char nas[20]={AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 				AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
 				AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
-				AL(4)};
+				AL(4),AL(5)};
 #undef AL
 
 asmlinkage long compat_sys_sendmsg(int fd, struct compat_msghdr __user *msg, unsigned flags)
@@ -755,13 +752,36 @@
 	return sys_recvfrom(fd, buf, len, flags | MSG_CMSG_COMPAT, addr, addrlen);
 }
 
+asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg,
+				    unsigned vlen, unsigned int flags,
+				    struct timespec __user *timeout)
+{
+	int datagrams;
+	struct timespec ktspec;
+	struct compat_timespec __user *utspec =
+			(struct compat_timespec __user *)timeout;
+
+	if (get_user(ktspec.tv_sec, &utspec->tv_sec) ||
+	    get_user(ktspec.tv_nsec, &utspec->tv_nsec))
+		return -EFAULT;
+
+	datagrams = __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen,
+				   flags | MSG_CMSG_COMPAT, &ktspec);
+	if (datagrams > 0 &&
+	    (put_user(ktspec.tv_sec, &utspec->tv_sec) ||
+	     put_user(ktspec.tv_nsec, &utspec->tv_nsec)))
+		datagrams = -EFAULT;
+
+	return datagrams;
+}
+
 asmlinkage long compat_sys_socketcall(int call, u32 __user *args)
 {
 	int ret;
 	u32 a[6];
 	u32 a0, a1;
 
-	if (call < SYS_SOCKET || call > SYS_ACCEPT4)
+	if (call < SYS_SOCKET || call > SYS_RECVMMSG)
 		return -EINVAL;
 	if (copy_from_user(a, args, nas[call]))
 		return -EFAULT;
@@ -823,6 +843,10 @@
 	case SYS_RECVMSG:
 		ret = compat_sys_recvmsg(a0, compat_ptr(a1), a[2]);
 		break;
+	case SYS_RECVMMSG:
+		ret = compat_sys_recvmmsg(a0, compat_ptr(a1), a[2], a[3],
+					  compat_ptr(a[4]));
+		break;
 	case SYS_ACCEPT4:
 		ret = sys_accept4(a0, compat_ptr(a1), compat_ptr(a[2]), a[3]);
 		break;
diff --git a/net/core/datagram.c b/net/core/datagram.c
index 4ade301..95c2e08 100644
--- a/net/core/datagram.c
+++ b/net/core/datagram.c
@@ -271,6 +271,7 @@
 	}
 
 	kfree_skb(skb);
+	atomic_inc(&sk->sk_drops);
 	sk_mem_reclaim_partial(sk);
 
 	return err;
diff --git a/net/core/dev.c b/net/core/dev.c
index b8f74cf..bf629ac 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -175,7 +175,7 @@
  * The @dev_base_head list is protected by @dev_base_lock and the rtnl
  * semaphore.
  *
- * Pure readers hold dev_base_lock for reading.
+ * Pure readers hold dev_base_lock for reading, or rcu_read_lock()
  *
  * Writers must hold the rtnl semaphore while they loop through the
  * dev_base_head list, and hold dev_base_lock for writing when they do the
@@ -193,18 +193,15 @@
 DEFINE_RWLOCK(dev_base_lock);
 EXPORT_SYMBOL(dev_base_lock);
 
-#define NETDEV_HASHBITS	8
-#define NETDEV_HASHENTRIES (1 << NETDEV_HASHBITS)
-
 static inline struct hlist_head *dev_name_hash(struct net *net, const char *name)
 {
 	unsigned hash = full_name_hash(name, strnlen(name, IFNAMSIZ));
-	return &net->dev_name_head[hash & ((1 << NETDEV_HASHBITS) - 1)];
+	return &net->dev_name_head[hash & (NETDEV_HASHENTRIES - 1)];
 }
 
 static inline struct hlist_head *dev_index_hash(struct net *net, int ifindex)
 {
-	return &net->dev_index_head[ifindex & ((1 << NETDEV_HASHBITS) - 1)];
+	return &net->dev_index_head[ifindex & (NETDEV_HASHENTRIES - 1)];
 }
 
 /* Device list insertion */
@@ -215,23 +212,26 @@
 	ASSERT_RTNL();
 
 	write_lock_bh(&dev_base_lock);
-	list_add_tail(&dev->dev_list, &net->dev_base_head);
-	hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name));
-	hlist_add_head(&dev->index_hlist, dev_index_hash(net, dev->ifindex));
+	list_add_tail_rcu(&dev->dev_list, &net->dev_base_head);
+	hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
+	hlist_add_head_rcu(&dev->index_hlist,
+			   dev_index_hash(net, dev->ifindex));
 	write_unlock_bh(&dev_base_lock);
 	return 0;
 }
 
-/* Device list removal */
+/* Device list removal
+ * caller must respect a RCU grace period before freeing/reusing dev
+ */
 static void unlist_netdevice(struct net_device *dev)
 {
 	ASSERT_RTNL();
 
 	/* Unlink dev from the device chain */
 	write_lock_bh(&dev_base_lock);
-	list_del(&dev->dev_list);
-	hlist_del(&dev->name_hlist);
-	hlist_del(&dev->index_hlist);
+	list_del_rcu(&dev->dev_list);
+	hlist_del_rcu(&dev->name_hlist);
+	hlist_del_rcu(&dev->index_hlist);
 	write_unlock_bh(&dev_base_lock);
 }
 
@@ -587,18 +587,44 @@
 struct net_device *__dev_get_by_name(struct net *net, const char *name)
 {
 	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_name_hash(net, name);
 
-	hlist_for_each(p, dev_name_hash(net, name)) {
-		struct net_device *dev
-			= hlist_entry(p, struct net_device, name_hlist);
+	hlist_for_each_entry(dev, p, head, name_hlist)
 		if (!strncmp(dev->name, name, IFNAMSIZ))
 			return dev;
-	}
+
 	return NULL;
 }
 EXPORT_SYMBOL(__dev_get_by_name);
 
 /**
+ *	dev_get_by_name_rcu	- find a device by its name
+ *	@net: the applicable net namespace
+ *	@name: name to find
+ *
+ *	Find an interface by name.
+ *	If the name is found a pointer to the device is returned.
+ * 	If the name is not found then %NULL is returned.
+ *	The reference counters are not incremented so the caller must be
+ *	careful with locks. The caller must hold RCU lock.
+ */
+
+struct net_device *dev_get_by_name_rcu(struct net *net, const char *name)
+{
+	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_name_hash(net, name);
+
+	hlist_for_each_entry_rcu(dev, p, head, name_hlist)
+		if (!strncmp(dev->name, name, IFNAMSIZ))
+			return dev;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dev_get_by_name_rcu);
+
+/**
  *	dev_get_by_name		- find a device by its name
  *	@net: the applicable net namespace
  *	@name: name to find
@@ -614,11 +640,11 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_name(net, name);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, name);
 	if (dev)
 		dev_hold(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 EXPORT_SYMBOL(dev_get_by_name);
@@ -638,17 +664,42 @@
 struct net_device *__dev_get_by_index(struct net *net, int ifindex)
 {
 	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_index_hash(net, ifindex);
 
-	hlist_for_each(p, dev_index_hash(net, ifindex)) {
-		struct net_device *dev
-			= hlist_entry(p, struct net_device, index_hlist);
+	hlist_for_each_entry(dev, p, head, index_hlist)
 		if (dev->ifindex == ifindex)
 			return dev;
-	}
+
 	return NULL;
 }
 EXPORT_SYMBOL(__dev_get_by_index);
 
+/**
+ *	dev_get_by_index_rcu - find a device by its ifindex
+ *	@net: the applicable net namespace
+ *	@ifindex: index of device
+ *
+ *	Search for an interface by index. Returns %NULL if the device
+ *	is not found or a pointer to the device. The device has not
+ *	had its reference counter increased so the caller must be careful
+ *	about locking. The caller must hold RCU lock.
+ */
+
+struct net_device *dev_get_by_index_rcu(struct net *net, int ifindex)
+{
+	struct hlist_node *p;
+	struct net_device *dev;
+	struct hlist_head *head = dev_index_hash(net, ifindex);
+
+	hlist_for_each_entry_rcu(dev, p, head, index_hlist)
+		if (dev->ifindex == ifindex)
+			return dev;
+
+	return NULL;
+}
+EXPORT_SYMBOL(dev_get_by_index_rcu);
+
 
 /**
  *	dev_get_by_index - find a device by its ifindex
@@ -665,11 +716,11 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifindex);
 	if (dev)
 		dev_hold(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 EXPORT_SYMBOL(dev_get_by_index);
@@ -748,15 +799,15 @@
 	struct net_device *dev, *ret;
 
 	ret = NULL;
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		if (((dev->flags ^ if_flags) & mask) == 0) {
 			dev_hold(dev);
 			ret = dev;
 			break;
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return ret;
 }
 EXPORT_SYMBOL(dev_get_by_flags);
@@ -935,7 +986,12 @@
 
 	write_lock_bh(&dev_base_lock);
 	hlist_del(&dev->name_hlist);
-	hlist_add_head(&dev->name_hlist, dev_name_hash(net, dev->name));
+	write_unlock_bh(&dev_base_lock);
+
+	synchronize_rcu();
+
+	write_lock_bh(&dev_base_lock);
+	hlist_add_head_rcu(&dev->name_hlist, dev_name_hash(net, dev->name));
 	write_unlock_bh(&dev_base_lock);
 
 	ret = call_netdevice_notifiers(NETDEV_CHANGENAME, dev);
@@ -1037,9 +1093,9 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_name(net, name);
-	read_unlock(&dev_base_lock);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(net, name);
+	rcu_read_unlock();
 
 	if (!dev && capable(CAP_NET_ADMIN))
 		request_module("%s", name);
@@ -1791,13 +1847,25 @@
 static struct netdev_queue *dev_pick_tx(struct net_device *dev,
 					struct sk_buff *skb)
 {
-	const struct net_device_ops *ops = dev->netdev_ops;
-	u16 queue_index = 0;
+	u16 queue_index;
+	struct sock *sk = skb->sk;
 
-	if (ops->ndo_select_queue)
-		queue_index = ops->ndo_select_queue(dev, skb);
-	else if (dev->real_num_tx_queues > 1)
-		queue_index = skb_tx_hash(dev, skb);
+	if (sk_tx_queue_recorded(sk)) {
+		queue_index = sk_tx_queue_get(sk);
+	} else {
+		const struct net_device_ops *ops = dev->netdev_ops;
+
+		if (ops->ndo_select_queue) {
+			queue_index = ops->ndo_select_queue(dev, skb);
+		} else {
+			queue_index = 0;
+			if (dev->real_num_tx_queues > 1)
+				queue_index = skb_tx_hash(dev, skb);
+
+			if (sk && sk->sk_dst_cache)
+				sk_tx_queue_set(sk, queue_index);
+		}
+	}
 
 	skb_set_queue_mapping(skb, queue_index);
 	return netdev_get_tx_queue(dev, queue_index);
@@ -2291,7 +2359,7 @@
 	if (!skb->tstamp.tv64)
 		net_timestamp(skb);
 
-	if (skb->vlan_tci && vlan_hwaccel_do_receive(skb))
+	if (vlan_tx_tag_present(skb) && vlan_hwaccel_do_receive(skb))
 		return NET_RX_SUCCESS;
 
 	/* if we've gotten here through NAPI, check netpoll */
@@ -2439,7 +2507,7 @@
 }
 EXPORT_SYMBOL(napi_gro_flush);
 
-int dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+enum gro_result dev_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff **pp = NULL;
 	struct packet_type *ptype;
@@ -2447,7 +2515,7 @@
 	struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK];
 	int same_flow;
 	int mac_len;
-	int ret;
+	enum gro_result ret;
 
 	if (!(skb->dev->features & NETIF_F_GRO))
 		goto normal;
@@ -2531,7 +2599,8 @@
 }
 EXPORT_SYMBOL(dev_gro_receive);
 
-static int __napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+static gro_result_t
+__napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	struct sk_buff *p;
 
@@ -2548,24 +2617,25 @@
 	return dev_gro_receive(napi, skb);
 }
 
-int napi_skb_finish(int ret, struct sk_buff *skb)
+gro_result_t napi_skb_finish(gro_result_t ret, struct sk_buff *skb)
 {
-	int err = NET_RX_SUCCESS;
-
 	switch (ret) {
 	case GRO_NORMAL:
-		return netif_receive_skb(skb);
+		if (netif_receive_skb(skb))
+			ret = GRO_DROP;
+		break;
 
 	case GRO_DROP:
-		err = NET_RX_DROP;
-		/* fall through */
-
 	case GRO_MERGED_FREE:
 		kfree_skb(skb);
 		break;
+
+	case GRO_HELD:
+	case GRO_MERGED:
+		break;
 	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL(napi_skb_finish);
 
@@ -2585,7 +2655,7 @@
 }
 EXPORT_SYMBOL(skb_gro_reset_offset);
 
-int napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
+gro_result_t napi_gro_receive(struct napi_struct *napi, struct sk_buff *skb)
 {
 	skb_gro_reset_offset(skb);
 
@@ -2604,49 +2674,41 @@
 
 struct sk_buff *napi_get_frags(struct napi_struct *napi)
 {
-	struct net_device *dev = napi->dev;
 	struct sk_buff *skb = napi->skb;
 
 	if (!skb) {
-		skb = netdev_alloc_skb(dev, GRO_MAX_HEAD + NET_IP_ALIGN);
-		if (!skb)
-			goto out;
-
-		skb_reserve(skb, NET_IP_ALIGN);
-
-		napi->skb = skb;
+		skb = netdev_alloc_skb_ip_align(napi->dev, GRO_MAX_HEAD);
+		if (skb)
+			napi->skb = skb;
 	}
-
-out:
 	return skb;
 }
 EXPORT_SYMBOL(napi_get_frags);
 
-int napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb, int ret)
+gro_result_t napi_frags_finish(struct napi_struct *napi, struct sk_buff *skb,
+			       gro_result_t ret)
 {
-	int err = NET_RX_SUCCESS;
-
 	switch (ret) {
 	case GRO_NORMAL:
 	case GRO_HELD:
 		skb->protocol = eth_type_trans(skb, napi->dev);
 
-		if (ret == GRO_NORMAL)
-			return netif_receive_skb(skb);
-
-		skb_gro_pull(skb, -ETH_HLEN);
+		if (ret == GRO_HELD)
+			skb_gro_pull(skb, -ETH_HLEN);
+		else if (netif_receive_skb(skb))
+			ret = GRO_DROP;
 		break;
 
 	case GRO_DROP:
-		err = NET_RX_DROP;
-		/* fall through */
-
 	case GRO_MERGED_FREE:
 		napi_reuse_skb(napi, skb);
 		break;
+
+	case GRO_MERGED:
+		break;
 	}
 
-	return err;
+	return ret;
 }
 EXPORT_SYMBOL(napi_frags_finish);
 
@@ -2687,12 +2749,12 @@
 }
 EXPORT_SYMBOL(napi_frags_skb);
 
-int napi_gro_frags(struct napi_struct *napi)
+gro_result_t napi_gro_frags(struct napi_struct *napi)
 {
 	struct sk_buff *skb = napi_frags_skb(napi);
 
 	if (!skb)
-		return NET_RX_DROP;
+		return GRO_DROP;
 
 	return napi_frags_finish(napi, skb, __napi_gro_receive(napi, skb));
 }
@@ -2937,15 +2999,15 @@
 	if (copy_from_user(&ifr, arg, sizeof(struct ifreq)))
 		return -EFAULT;
 
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifr.ifr_ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifr.ifr_ifindex);
 	if (!dev) {
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		return -ENODEV;
 	}
 
 	strcpy(ifr.ifr_name, dev->name);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	if (copy_to_user(arg, &ifr, sizeof(struct ifreq)))
 		return -EFAULT;
@@ -3015,18 +3077,18 @@
  *	in detail.
  */
 void *dev_seq_start(struct seq_file *seq, loff_t *pos)
-	__acquires(dev_base_lock)
+	__acquires(RCU)
 {
 	struct net *net = seq_file_net(seq);
 	loff_t off;
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
+	rcu_read_lock();
 	if (!*pos)
 		return SEQ_START_TOKEN;
 
 	off = 1;
-	for_each_netdev(net, dev)
+	for_each_netdev_rcu(net, dev)
 		if (off++ == *pos)
 			return dev;
 
@@ -3035,16 +3097,18 @@
 
 void *dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 {
-	struct net *net = seq_file_net(seq);
+	struct net_device *dev = (v == SEQ_START_TOKEN) ?
+				  first_net_device(seq_file_net(seq)) :
+				  next_net_device((struct net_device *)v);
+
 	++*pos;
-	return v == SEQ_START_TOKEN ?
-		first_net_device(net) : next_net_device((struct net_device *)v);
+	return rcu_dereference(dev);
 }
 
 void dev_seq_stop(struct seq_file *seq, void *v)
-	__releases(dev_base_lock)
+	__releases(RCU)
 {
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev)
@@ -4253,12 +4317,12 @@
 EXPORT_SYMBOL(dev_set_mac_address);
 
 /*
- *	Perform the SIOCxIFxxx calls, inside read_lock(dev_base_lock)
+ *	Perform the SIOCxIFxxx calls, inside rcu_read_lock()
  */
 static int dev_ifsioc_locked(struct net *net, struct ifreq *ifr, unsigned int cmd)
 {
 	int err;
-	struct net_device *dev = __dev_get_by_name(net, ifr->ifr_name);
+	struct net_device *dev = dev_get_by_name_rcu(net, ifr->ifr_name);
 
 	if (!dev)
 		return -ENODEV;
@@ -4490,9 +4554,9 @@
 	case SIOCGIFINDEX:
 	case SIOCGIFTXQLEN:
 		dev_load(net, ifr.ifr_name);
-		read_lock(&dev_base_lock);
+		rcu_read_lock();
 		ret = dev_ifsioc_locked(net, &ifr, cmd);
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		if (!ret) {
 			if (colon)
 				*colon = ':';
@@ -4635,59 +4699,76 @@
 	list_add_tail(&dev->todo_list, &net_todo_list);
 }
 
-static void rollback_registered(struct net_device *dev)
+static void rollback_registered_many(struct list_head *head)
 {
+	struct net_device *dev;
+
 	BUG_ON(dev_boot_phase);
 	ASSERT_RTNL();
 
-	/* Some devices call without registering for initialization unwind. */
-	if (dev->reg_state == NETREG_UNINITIALIZED) {
-		printk(KERN_DEBUG "unregister_netdevice: device %s/%p never "
-				  "was registered\n", dev->name, dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		/* Some devices call without registering
+		 * for initialization unwind.
+		 */
+		if (dev->reg_state == NETREG_UNINITIALIZED) {
+			pr_debug("unregister_netdevice: device %s/%p never "
+				 "was registered\n", dev->name, dev);
 
-		WARN_ON(1);
-		return;
+			WARN_ON(1);
+			return;
+		}
+
+		BUG_ON(dev->reg_state != NETREG_REGISTERED);
+
+		/* If device is running, close it first. */
+		dev_close(dev);
+
+		/* And unlink it from device chain. */
+		unlist_netdevice(dev);
+
+		dev->reg_state = NETREG_UNREGISTERING;
 	}
 
-	BUG_ON(dev->reg_state != NETREG_REGISTERED);
+	synchronize_net();
 
-	/* If device is running, close it first. */
-	dev_close(dev);
+	list_for_each_entry(dev, head, unreg_list) {
+		/* Shutdown queueing discipline. */
+		dev_shutdown(dev);
 
-	/* And unlink it from device chain. */
-	unlist_netdevice(dev);
 
-	dev->reg_state = NETREG_UNREGISTERING;
+		/* Notify protocols, that we are about to destroy
+		   this device. They should clean all the things.
+		*/
+		call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
+
+		/*
+		 *	Flush the unicast and multicast chains
+		 */
+		dev_unicast_flush(dev);
+		dev_addr_discard(dev);
+
+		if (dev->netdev_ops->ndo_uninit)
+			dev->netdev_ops->ndo_uninit(dev);
+
+		/* Notifier chain MUST detach us from master device. */
+		WARN_ON(dev->master);
+
+		/* Remove entries from kobject tree */
+		netdev_unregister_kobject(dev);
+	}
 
 	synchronize_net();
 
-	/* Shutdown queueing discipline. */
-	dev_shutdown(dev);
+	list_for_each_entry(dev, head, unreg_list)
+		dev_put(dev);
+}
 
+static void rollback_registered(struct net_device *dev)
+{
+	LIST_HEAD(single);
 
-	/* Notify protocols, that we are about to destroy
-	   this device. They should clean all the things.
-	*/
-	call_netdevice_notifiers(NETDEV_UNREGISTER, dev);
-
-	/*
-	 *	Flush the unicast and multicast chains
-	 */
-	dev_unicast_flush(dev);
-	dev_addr_discard(dev);
-
-	if (dev->netdev_ops->ndo_uninit)
-		dev->netdev_ops->ndo_uninit(dev);
-
-	/* Notifier chain MUST detach us from master device. */
-	WARN_ON(dev->master);
-
-	/* Remove entries from kobject tree */
-	netdev_unregister_kobject(dev);
-
-	synchronize_net();
-
-	dev_put(dev);
+	list_add(&dev->unreg_list, &single);
+	rollback_registered_many(&single);
 }
 
 static void __netdev_init_queue_locks_one(struct net_device *dev,
@@ -4836,6 +4917,12 @@
 		dev->features |= NETIF_F_GSO;
 
 	netdev_initialize_kobject(dev);
+
+	ret = call_netdevice_notifiers(NETDEV_POST_INIT, dev);
+	ret = notifier_to_errno(ret);
+	if (ret)
+		goto err_uninit;
+
 	ret = netdev_register_kobject(dev);
 	if (ret)
 		goto err_uninit;
@@ -5173,6 +5260,7 @@
 	netdev_init_queues(dev);
 
 	INIT_LIST_HEAD(&dev->napi_list);
+	INIT_LIST_HEAD(&dev->unreg_list);
 	dev->priv_flags = IFF_XMIT_DST_RELEASE;
 	setup(dev);
 	strcpy(dev->name, name);
@@ -5237,25 +5325,48 @@
 EXPORT_SYMBOL(synchronize_net);
 
 /**
- *	unregister_netdevice - remove device from the kernel
+ *	unregister_netdevice_queue - remove device from the kernel
  *	@dev: device
- *
+ *	@head: list
+
  *	This function shuts down a device interface and removes it
  *	from the kernel tables.
+ *	If head not NULL, device is queued to be unregistered later.
  *
  *	Callers must hold the rtnl semaphore.  You may want
  *	unregister_netdev() instead of this.
  */
 
-void unregister_netdevice(struct net_device *dev)
+void unregister_netdevice_queue(struct net_device *dev, struct list_head *head)
 {
 	ASSERT_RTNL();
 
-	rollback_registered(dev);
-	/* Finish processing unregister after unlock */
-	net_set_todo(dev);
+	if (head) {
+		list_move_tail(&dev->unreg_list, head);
+	} else {
+		rollback_registered(dev);
+		/* Finish processing unregister after unlock */
+		net_set_todo(dev);
+	}
 }
-EXPORT_SYMBOL(unregister_netdevice);
+EXPORT_SYMBOL(unregister_netdevice_queue);
+
+/**
+ *	unregister_netdevice_many - unregister many devices
+ *	@head: list of devices
+ *
+ */
+void unregister_netdevice_many(struct list_head *head)
+{
+	struct net_device *dev;
+
+	if (!list_empty(head)) {
+		rollback_registered_many(head);
+		list_for_each_entry(dev, head, unreg_list)
+			net_set_todo(dev);
+	}
+}
+EXPORT_SYMBOL(unregister_netdevice_many);
 
 /**
  *	unregister_netdev - remove device from the kernel
@@ -5483,7 +5594,7 @@
 	one |= NETIF_F_ALL_CSUM;
 
 	one |= all & NETIF_F_ONE_FOR_ALL;
-	all &= one | NETIF_F_LLTX | NETIF_F_GSO;
+	all &= one | NETIF_F_LLTX | NETIF_F_GSO | NETIF_F_UFO;
 	all |= one & mask & NETIF_F_ONE_FOR_ALL;
 
 	return all;
@@ -5582,7 +5693,7 @@
 
 		/* Delete virtual devices */
 		if (dev->rtnl_link_ops && dev->rtnl_link_ops->dellink) {
-			dev->rtnl_link_ops->dellink(dev);
+			dev->rtnl_link_ops->dellink(dev, NULL);
 			goto restart;
 		}
 
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index 4c12ddb..d8aee58 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -198,13 +198,6 @@
 		rc = ops->get_sset_count(dev, ETH_SS_PRIV_FLAGS);
 		if (rc >= 0)
 			info.n_priv_flags = rc;
-	} else {
-		/* code path for obsolete hooks */
-
-		if (ops->self_test_count)
-			info.testinfo_len = ops->self_test_count(dev);
-		if (ops->get_stats_count)
-			info.n_stats = ops->get_stats_count(dev);
 	}
 	if (ops->get_regs_len)
 		info.regdump_len = ops->get_regs_len(dev);
@@ -309,6 +302,26 @@
 	return ret;
 }
 
+static int ethtool_reset(struct net_device *dev, char __user *useraddr)
+{
+	struct ethtool_value reset;
+	int ret;
+
+	if (!dev->ethtool_ops->reset)
+		return -EOPNOTSUPP;
+
+	if (copy_from_user(&reset, useraddr, sizeof(reset)))
+		return -EFAULT;
+
+	ret = dev->ethtool_ops->reset(dev, &reset.data);
+	if (ret)
+		return ret;
+
+	if (copy_to_user(useraddr, &reset, sizeof(reset)))
+		return -EFAULT;
+	return 0;
+}
+
 static int ethtool_get_wol(struct net_device *dev, char __user *useraddr)
 {
 	struct ethtool_wolinfo wol = { ETHTOOL_GWOL };
@@ -684,16 +697,10 @@
 	u64 *data;
 	int ret, test_len;
 
-	if (!ops->self_test)
-		return -EOPNOTSUPP;
-	if (!ops->get_sset_count && !ops->self_test_count)
+	if (!ops->self_test || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
-	if (ops->get_sset_count)
-		test_len = ops->get_sset_count(dev, ETH_SS_TEST);
-	else
-		/* code path for obsolete hook */
-		test_len = ops->self_test_count(dev);
+	test_len = ops->get_sset_count(dev, ETH_SS_TEST);
 	if (test_len < 0)
 		return test_len;
 	WARN_ON(test_len == 0);
@@ -728,36 +735,17 @@
 	u8 *data;
 	int ret;
 
-	if (!ops->get_strings)
+	if (!ops->get_strings || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
 	if (copy_from_user(&gstrings, useraddr, sizeof(gstrings)))
 		return -EFAULT;
 
-	if (ops->get_sset_count) {
-		ret = ops->get_sset_count(dev, gstrings.string_set);
-		if (ret < 0)
-			return ret;
+	ret = ops->get_sset_count(dev, gstrings.string_set);
+	if (ret < 0)
+		return ret;
 
-		gstrings.len = ret;
-	} else {
-		/* code path for obsolete hooks */
-
-		switch (gstrings.string_set) {
-		case ETH_SS_TEST:
-			if (!ops->self_test_count)
-				return -EOPNOTSUPP;
-			gstrings.len = ops->self_test_count(dev);
-			break;
-		case ETH_SS_STATS:
-			if (!ops->get_stats_count)
-				return -EOPNOTSUPP;
-			gstrings.len = ops->get_stats_count(dev);
-			break;
-		default:
-			return -EINVAL;
-		}
-	}
+	gstrings.len = ret;
 
 	data = kmalloc(gstrings.len * ETH_GSTRING_LEN, GFP_USER);
 	if (!data)
@@ -798,16 +786,10 @@
 	u64 *data;
 	int ret, n_stats;
 
-	if (!ops->get_ethtool_stats)
-		return -EOPNOTSUPP;
-	if (!ops->get_sset_count && !ops->get_stats_count)
+	if (!ops->get_ethtool_stats || !ops->get_sset_count)
 		return -EOPNOTSUPP;
 
-	if (ops->get_sset_count)
-		n_stats = ops->get_sset_count(dev, ETH_SS_STATS);
-	else
-		/* code path for obsolete hook */
-		n_stats = ops->get_stats_count(dev);
+	n_stats = ops->get_sset_count(dev, ETH_SS_STATS);
 	if (n_stats < 0)
 		return n_stats;
 	WARN_ON(n_stats == 0);
@@ -1127,6 +1109,9 @@
 	case ETHTOOL_FLASHDEV:
 		rc = ethtool_flash_device(dev, useraddr);
 		break;
+	case ETHTOOL_RESET:
+		rc = ethtool_reset(dev, useraddr);
+		break;
 	default:
 		rc = -EOPNOTSUPP;
 	}
diff --git a/net/core/filter.c b/net/core/filter.c
index d1d779c..08db7b9 100644
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -303,6 +303,12 @@
 		case SKF_AD_IFINDEX:
 			A = skb->dev->ifindex;
 			continue;
+		case SKF_AD_MARK:
+			A = skb->mark;
+			continue;
+		case SKF_AD_QUEUE:
+			A = skb->queue_mapping;
+			continue;
 		case SKF_AD_NLATTR: {
 			struct nlattr *nla;
 
diff --git a/net/core/gen_stats.c b/net/core/gen_stats.c
index 8569310..393b1d8 100644
--- a/net/core/gen_stats.c
+++ b/net/core/gen_stats.c
@@ -127,6 +127,7 @@
 /**
  * gnet_stats_copy_rate_est - copy rate estimator statistics into statistics TLV
  * @d: dumping handle
+ * @b: basic statistics
  * @r: rate estimator statistics
  *
  * Appends the rate estimator statistics to the top level TLV created by
@@ -136,8 +137,13 @@
  * if the room in the socket buffer was not sufficient.
  */
 int
-gnet_stats_copy_rate_est(struct gnet_dump *d, struct gnet_stats_rate_est *r)
+gnet_stats_copy_rate_est(struct gnet_dump *d,
+			 const struct gnet_stats_basic_packed *b,
+			 struct gnet_stats_rate_est *r)
 {
+	if (b && !gen_estimator_active(b, r))
+		return 0;
+
 	if (d->compat_tc_stats) {
 		d->tc_stats.bps = r->bps;
 		d->tc_stats.pps = r->pps;
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 427ded8..157645c 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -130,6 +130,48 @@
 	return -EINVAL;
 }
 
+static ssize_t show_speed(struct device *dev,
+			  struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	int ret = -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (netif_running(netdev) &&
+	    netdev->ethtool_ops &&
+	    netdev->ethtool_ops->get_settings) {
+		struct ethtool_cmd cmd = { ETHTOOL_GSET };
+
+		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
+			ret = sprintf(buf, fmt_dec, ethtool_cmd_speed(&cmd));
+	}
+	rtnl_unlock();
+	return ret;
+}
+
+static ssize_t show_duplex(struct device *dev,
+			   struct device_attribute *attr, char *buf)
+{
+	struct net_device *netdev = to_net_dev(dev);
+	int ret = -EINVAL;
+
+	if (!rtnl_trylock())
+		return restart_syscall();
+
+	if (netif_running(netdev) &&
+	    netdev->ethtool_ops &&
+	    netdev->ethtool_ops->get_settings) {
+		struct ethtool_cmd cmd = { ETHTOOL_GSET };
+
+		if (!netdev->ethtool_ops->get_settings(netdev, &cmd))
+			ret = sprintf(buf, "%s\n", cmd.duplex ? "full" : "half");
+	}
+	rtnl_unlock();
+	return ret;
+}
+
 static ssize_t show_dormant(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
@@ -259,6 +301,8 @@
 	__ATTR(address, S_IRUGO, show_address, NULL),
 	__ATTR(broadcast, S_IRUGO, show_broadcast, NULL),
 	__ATTR(carrier, S_IRUGO, show_carrier, NULL),
+	__ATTR(speed, S_IRUGO, show_speed, NULL),
+	__ATTR(duplex, S_IRUGO, show_duplex, NULL),
 	__ATTR(dormant, S_IRUGO, show_dormant, NULL),
 	__ATTR(operstate, S_IRUGO, show_operstate, NULL),
 	__ATTR(mtu, S_IRUGO | S_IWUSR, show_mtu, store_mtu),
@@ -500,11 +544,18 @@
 	dev_set_name(dev, "%s", net->name);
 
 #ifdef CONFIG_SYSFS
-	*groups++ = &netstat_group;
+	/* Allow for a device specific group */
+	if (*groups)
+		groups++;
 
+	*groups++ = &netstat_group;
 #ifdef CONFIG_WIRELESS_EXT_SYSFS
-	if (net->wireless_handlers || net->ieee80211_ptr)
+	if (net->ieee80211_ptr)
 		*groups++ = &wireless_group;
+#ifdef CONFIG_WIRELESS_EXT
+	else if (net->wireless_handlers)
+		*groups++ = &wireless_group;
+#endif
 #endif
 #endif /* CONFIG_SYSFS */
 
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 6eb8d47..d38470a 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -340,6 +340,7 @@
 	__u16 cur_udp_src;
 	__u16 cur_queue_map;
 	__u32 cur_pkt_size;
+	__u32 last_pkt_size;
 
 	__u8 hh[14];
 	/* = {
@@ -3434,7 +3435,7 @@
 			pkt_dev->clone_count--;	/* back out increment, OOM */
 			return;
 		}
-
+		pkt_dev->last_pkt_size = pkt_dev->skb->len;
 		pkt_dev->allocated_skbs++;
 		pkt_dev->clone_count = 0;	/* reset counter */
 	}
@@ -3446,12 +3447,14 @@
 	txq = netdev_get_tx_queue(odev, queue_map);
 
 	__netif_tx_lock_bh(txq);
-	atomic_inc(&(pkt_dev->skb->users));
 
-	if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq)))
+	if (unlikely(netif_tx_queue_stopped(txq) || netif_tx_queue_frozen(txq))) {
 		ret = NETDEV_TX_BUSY;
-	else
-		ret = (*xmit)(pkt_dev->skb, odev);
+		pkt_dev->last_ok = 0;
+		goto unlock;
+	}
+	atomic_inc(&(pkt_dev->skb->users));
+	ret = (*xmit)(pkt_dev->skb, odev);
 
 	switch (ret) {
 	case NETDEV_TX_OK:
@@ -3459,7 +3462,7 @@
 		pkt_dev->last_ok = 1;
 		pkt_dev->sofar++;
 		pkt_dev->seq_num++;
-		pkt_dev->tx_bytes += pkt_dev->cur_pkt_size;
+		pkt_dev->tx_bytes += pkt_dev->last_pkt_size;
 		break;
 	default: /* Drivers are not supposed to return other values! */
 		if (net_ratelimit())
@@ -3473,6 +3476,7 @@
 		atomic_dec(&(pkt_dev->skb->users));
 		pkt_dev->last_ok = 0;
 	}
+unlock:
 	__netif_tx_unlock_bh(txq);
 
 	/* If pkt_dev->count is zero, then run forever */
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index eb42873..391a62c 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -248,7 +248,7 @@
 int __rtnl_link_register(struct rtnl_link_ops *ops)
 {
 	if (!ops->dellink)
-		ops->dellink = unregister_netdevice;
+		ops->dellink = unregister_netdevice_queue;
 
 	list_add_tail(&ops->list, &link_ops);
 	return 0;
@@ -277,13 +277,13 @@
 static void __rtnl_kill_links(struct net *net, struct rtnl_link_ops *ops)
 {
 	struct net_device *dev;
-restart:
+	LIST_HEAD(list_kill);
+
 	for_each_netdev(net, dev) {
-		if (dev->rtnl_link_ops == ops) {
-			ops->dellink(dev);
-			goto restart;
-		}
+		if (dev->rtnl_link_ops == ops)
+			ops->dellink(dev, &list_kill);
 	}
+	unregister_netdevice_many(&list_kill);
 }
 
 void rtnl_kill_links(struct net *net, struct rtnl_link_ops *ops)
@@ -682,22 +682,33 @@
 static int rtnl_dump_ifinfo(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
-	int idx;
-	int s_idx = cb->args[0];
+	int h, s_h;
+	int idx = 0, s_idx;
 	struct net_device *dev;
+	struct hlist_head *head;
+	struct hlist_node *node;
 
-	idx = 0;
-	for_each_netdev(net, dev) {
-		if (idx < s_idx)
-			goto cont;
-		if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
-				     NETLINK_CB(cb->skb).pid,
-				     cb->nlh->nlmsg_seq, 0, NLM_F_MULTI) <= 0)
-			break;
+	s_h = cb->args[0];
+	s_idx = cb->args[1];
+
+	for (h = s_h; h < NETDEV_HASHENTRIES; h++, s_idx = 0) {
+		idx = 0;
+		head = &net->dev_index_head[h];
+		hlist_for_each_entry(dev, node, head, index_hlist) {
+			if (idx < s_idx)
+				goto cont;
+			if (rtnl_fill_ifinfo(skb, dev, RTM_NEWLINK,
+					     NETLINK_CB(cb->skb).pid,
+					     cb->nlh->nlmsg_seq, 0,
+					     NLM_F_MULTI) <= 0)
+				goto out;
 cont:
-		idx++;
+			idx++;
+		}
 	}
-	cb->args[0] = idx;
+out:
+	cb->args[1] = idx;
+	cb->args[0] = h;
 
 	return skb->len;
 }
@@ -910,9 +921,9 @@
 	err = -EINVAL;
 	ifm = nlmsg_data(nlh);
 	if (ifm->ifi_index > 0)
-		dev = dev_get_by_index(net, ifm->ifi_index);
+		dev = __dev_get_by_index(net, ifm->ifi_index);
 	else if (tb[IFLA_IFNAME])
-		dev = dev_get_by_name(net, ifname);
+		dev = __dev_get_by_name(net, ifname);
 	else
 		goto errout;
 
@@ -922,11 +933,9 @@
 	}
 
 	if ((err = validate_linkmsg(dev, tb)) < 0)
-		goto errout_dev;
+		goto errout;
 
 	err = do_setlink(dev, ifm, tb, ifname, 0);
-errout_dev:
-	dev_put(dev);
 errout:
 	return err;
 }
@@ -963,7 +972,7 @@
 	if (!ops)
 		return -EOPNOTSUPP;
 
-	ops->dellink(dev);
+	ops->dellink(dev, NULL);
 	return 0;
 }
 
@@ -1154,6 +1163,7 @@
 {
 	struct net *net = sock_net(skb->sk);
 	struct ifinfomsg *ifm;
+	char ifname[IFNAMSIZ];
 	struct nlattr *tb[IFLA_MAX+1];
 	struct net_device *dev = NULL;
 	struct sk_buff *nskb;
@@ -1163,19 +1173,23 @@
 	if (err < 0)
 		return err;
 
+	if (tb[IFLA_IFNAME])
+		nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+
 	ifm = nlmsg_data(nlh);
-	if (ifm->ifi_index > 0) {
-		dev = dev_get_by_index(net, ifm->ifi_index);
-		if (dev == NULL)
-			return -ENODEV;
-	} else
+	if (ifm->ifi_index > 0)
+		dev = __dev_get_by_index(net, ifm->ifi_index);
+	else if (tb[IFLA_IFNAME])
+		dev = __dev_get_by_name(net, ifname);
+	else
 		return -EINVAL;
 
+	if (dev == NULL)
+		return -ENODEV;
+
 	nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
-	if (nskb == NULL) {
-		err = -ENOBUFS;
-		goto errout;
-	}
+	if (nskb == NULL)
+		return -ENOBUFS;
 
 	err = rtnl_fill_ifinfo(nskb, dev, RTM_NEWLINK, NETLINK_CB(skb).pid,
 			       nlh->nlmsg_seq, 0, 0);
@@ -1183,11 +1197,8 @@
 		/* -EMSGSIZE implies BUG in if_nlmsg_size */
 		WARN_ON(err == -EMSGSIZE);
 		kfree_skb(nskb);
-		goto errout;
-	}
-	err = rtnl_unicast(nskb, net, NETLINK_CB(skb).pid);
-errout:
-	dev_put(dev);
+	} else
+		err = rtnl_unicast(nskb, net, NETLINK_CB(skb).pid);
 
 	return err;
 }
diff --git a/net/core/sock.c b/net/core/sock.c
index 7626b6a..76ff58d 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -274,25 +274,27 @@
 
 int sock_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
-	int err = 0;
+	int err;
 	int skb_len;
+	unsigned long flags;
+	struct sk_buff_head *list = &sk->sk_receive_queue;
 
 	/* Cast sk->rcvbuf to unsigned... It's pointless, but reduces
 	   number of warnings when compiling with -W --ANK
 	 */
 	if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
 	    (unsigned)sk->sk_rcvbuf) {
-		err = -ENOMEM;
-		goto out;
+		atomic_inc(&sk->sk_drops);
+		return -ENOMEM;
 	}
 
 	err = sk_filter(sk, skb);
 	if (err)
-		goto out;
+		return err;
 
 	if (!sk_rmem_schedule(sk, skb->truesize)) {
-		err = -ENOBUFS;
-		goto out;
+		atomic_inc(&sk->sk_drops);
+		return -ENOBUFS;
 	}
 
 	skb->dev = NULL;
@@ -305,12 +307,14 @@
 	 */
 	skb_len = skb->len;
 
-	skb_queue_tail(&sk->sk_receive_queue, skb);
+	spin_lock_irqsave(&list->lock, flags);
+	skb->dropcount = atomic_read(&sk->sk_drops);
+	__skb_queue_tail(list, skb);
+	spin_unlock_irqrestore(&list->lock, flags);
 
 	if (!sock_flag(sk, SOCK_DEAD))
 		sk->sk_data_ready(sk, skb_len);
-out:
-	return err;
+	return 0;
 }
 EXPORT_SYMBOL(sock_queue_rcv_skb);
 
@@ -348,11 +352,18 @@
 }
 EXPORT_SYMBOL(sk_receive_skb);
 
+void sk_reset_txq(struct sock *sk)
+{
+	sk_tx_queue_clear(sk);
+}
+EXPORT_SYMBOL(sk_reset_txq);
+
 struct dst_entry *__sk_dst_check(struct sock *sk, u32 cookie)
 {
 	struct dst_entry *dst = sk->sk_dst_cache;
 
 	if (dst && dst->obsolete && dst->ops->check(dst, cookie) == NULL) {
+		sk_tx_queue_clear(sk);
 		sk->sk_dst_cache = NULL;
 		dst_release(dst);
 		return NULL;
@@ -406,17 +417,18 @@
 	if (copy_from_user(devname, optval, optlen))
 		goto out;
 
-	if (devname[0] == '\0') {
-		index = 0;
-	} else {
-		struct net_device *dev = dev_get_by_name(net, devname);
+	index = 0;
+	if (devname[0] != '\0') {
+		struct net_device *dev;
 
+		rcu_read_lock();
+		dev = dev_get_by_name_rcu(net, devname);
+		if (dev)
+			index = dev->ifindex;
+		rcu_read_unlock();
 		ret = -ENODEV;
 		if (!dev)
 			goto out;
-
-		index = dev->ifindex;
-		dev_put(dev);
 	}
 
 	lock_sock(sk);
@@ -702,6 +714,12 @@
 
 		/* We implement the SO_SNDLOWAT etc to
 		   not be settable (1003.1g 5.3) */
+	case SO_RXQ_OVFL:
+		if (valbool)
+			sock_set_flag(sk, SOCK_RXQ_OVFL);
+		else
+			sock_reset_flag(sk, SOCK_RXQ_OVFL);
+		break;
 	default:
 		ret = -ENOPROTOOPT;
 		break;
@@ -901,6 +919,10 @@
 		v.val = sk->sk_mark;
 		break;
 
+	case SO_RXQ_OVFL:
+		v.val = !!sock_flag(sk, SOCK_RXQ_OVFL);
+		break;
+
 	default:
 		return -ENOPROTOOPT;
 	}
@@ -939,7 +961,8 @@
 	void *sptr = nsk->sk_security;
 #endif
 	BUILD_BUG_ON(offsetof(struct sock, sk_copy_start) !=
-		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt));
+		     sizeof(osk->sk_node) + sizeof(osk->sk_refcnt) +
+		     sizeof(osk->sk_tx_queue_mapping));
 	memcpy(&nsk->sk_copy_start, &osk->sk_copy_start,
 	       osk->sk_prot->obj_size - offsetof(struct sock, sk_copy_start));
 #ifdef CONFIG_SECURITY_NETWORK
@@ -983,6 +1006,7 @@
 
 		if (!try_module_get(prot->owner))
 			goto out_free_sec;
+		sk_tx_queue_clear(sk);
 	}
 
 	return sk;
diff --git a/net/dccp/ccids/ccid2.c b/net/dccp/ccids/ccid2.c
index e8cf99e..a47a8c9 100644
--- a/net/dccp/ccids/ccid2.c
+++ b/net/dccp/ccids/ccid2.c
@@ -33,20 +33,20 @@
 static int ccid2_debug;
 #define ccid2_pr_debug(format, a...)	DCCP_PR_DEBUG(ccid2_debug, format, ##a)
 
-static void ccid2_hc_tx_check_sanity(const struct ccid2_hc_tx_sock *hctx)
+static void ccid2_hc_tx_check_sanity(const struct ccid2_hc_tx_sock *hc)
 {
 	int len = 0;
 	int pipe = 0;
-	struct ccid2_seq *seqp = hctx->ccid2hctx_seqh;
+	struct ccid2_seq *seqp = hc->tx_seqh;
 
 	/* there is data in the chain */
-	if (seqp != hctx->ccid2hctx_seqt) {
+	if (seqp != hc->tx_seqt) {
 		seqp = seqp->ccid2s_prev;
 		len++;
 		if (!seqp->ccid2s_acked)
 			pipe++;
 
-		while (seqp != hctx->ccid2hctx_seqt) {
+		while (seqp != hc->tx_seqt) {
 			struct ccid2_seq *prev = seqp->ccid2s_prev;
 
 			len++;
@@ -63,30 +63,30 @@
 		}
 	}
 
-	BUG_ON(pipe != hctx->ccid2hctx_pipe);
+	BUG_ON(pipe != hc->tx_pipe);
 	ccid2_pr_debug("len of chain=%d\n", len);
 
 	do {
 		seqp = seqp->ccid2s_prev;
 		len++;
-	} while (seqp != hctx->ccid2hctx_seqh);
+	} while (seqp != hc->tx_seqh);
 
 	ccid2_pr_debug("total len=%d\n", len);
-	BUG_ON(len != hctx->ccid2hctx_seqbufc * CCID2_SEQBUF_LEN);
+	BUG_ON(len != hc->tx_seqbufc * CCID2_SEQBUF_LEN);
 }
 #else
 #define ccid2_pr_debug(format, a...)
-#define ccid2_hc_tx_check_sanity(hctx)
+#define ccid2_hc_tx_check_sanity(hc)
 #endif
 
-static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hctx)
+static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hc)
 {
 	struct ccid2_seq *seqp;
 	int i;
 
 	/* check if we have space to preserve the pointer to the buffer */
-	if (hctx->ccid2hctx_seqbufc >= (sizeof(hctx->ccid2hctx_seqbuf) /
-					sizeof(struct ccid2_seq*)))
+	if (hc->tx_seqbufc >= (sizeof(hc->tx_seqbuf) /
+			       sizeof(struct ccid2_seq *)))
 		return -ENOMEM;
 
 	/* allocate buffer and initialize linked list */
@@ -102,29 +102,29 @@
 	seqp->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
 
 	/* This is the first allocation.  Initiate the head and tail.  */
-	if (hctx->ccid2hctx_seqbufc == 0)
-		hctx->ccid2hctx_seqh = hctx->ccid2hctx_seqt = seqp;
+	if (hc->tx_seqbufc == 0)
+		hc->tx_seqh = hc->tx_seqt = seqp;
 	else {
 		/* link the existing list with the one we just created */
-		hctx->ccid2hctx_seqh->ccid2s_next = seqp;
-		seqp->ccid2s_prev = hctx->ccid2hctx_seqh;
+		hc->tx_seqh->ccid2s_next = seqp;
+		seqp->ccid2s_prev = hc->tx_seqh;
 
-		hctx->ccid2hctx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
-		seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hctx->ccid2hctx_seqt;
+		hc->tx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1];
+		seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hc->tx_seqt;
 	}
 
 	/* store the original pointer to the buffer so we can free it */
-	hctx->ccid2hctx_seqbuf[hctx->ccid2hctx_seqbufc] = seqp;
-	hctx->ccid2hctx_seqbufc++;
+	hc->tx_seqbuf[hc->tx_seqbufc] = seqp;
+	hc->tx_seqbufc++;
 
 	return 0;
 }
 
 static int ccid2_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_pipe < hctx->ccid2hctx_cwnd)
+	if (hc->tx_pipe < hc->tx_cwnd)
 		return 0;
 
 	return 1; /* XXX CCID should dequeue when ready instead of polling */
@@ -133,7 +133,7 @@
 static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->ccid2hctx_cwnd, 2);
+	u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->tx_cwnd, 2);
 
 	/*
 	 * Ensure that Ack Ratio does not exceed ceil(cwnd/2), which is (2) from
@@ -155,10 +155,10 @@
 	dp->dccps_l_ack_ratio = val;
 }
 
-static void ccid2_change_srtt(struct ccid2_hc_tx_sock *hctx, long val)
+static void ccid2_change_srtt(struct ccid2_hc_tx_sock *hc, long val)
 {
 	ccid2_pr_debug("change SRTT to %ld\n", val);
-	hctx->ccid2hctx_srtt = val;
+	hc->tx_srtt = val;
 }
 
 static void ccid2_start_rto_timer(struct sock *sk);
@@ -166,45 +166,44 @@
 static void ccid2_hc_tx_rto_expire(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	long s;
 
 	bh_lock_sock(sk);
 	if (sock_owned_by_user(sk)) {
-		sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer,
-			       jiffies + HZ / 5);
+		sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + HZ / 5);
 		goto out;
 	}
 
 	ccid2_pr_debug("RTO_EXPIRE\n");
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 
 	/* back-off timer */
-	hctx->ccid2hctx_rto <<= 1;
+	hc->tx_rto <<= 1;
 
-	s = hctx->ccid2hctx_rto / HZ;
+	s = hc->tx_rto / HZ;
 	if (s > 60)
-		hctx->ccid2hctx_rto = 60 * HZ;
+		hc->tx_rto = 60 * HZ;
 
 	ccid2_start_rto_timer(sk);
 
 	/* adjust pipe, cwnd etc */
-	hctx->ccid2hctx_ssthresh = hctx->ccid2hctx_cwnd / 2;
-	if (hctx->ccid2hctx_ssthresh < 2)
-		hctx->ccid2hctx_ssthresh = 2;
-	hctx->ccid2hctx_cwnd	 = 1;
-	hctx->ccid2hctx_pipe	 = 0;
+	hc->tx_ssthresh = hc->tx_cwnd / 2;
+	if (hc->tx_ssthresh < 2)
+		hc->tx_ssthresh = 2;
+	hc->tx_cwnd	 = 1;
+	hc->tx_pipe	 = 0;
 
 	/* clear state about stuff we sent */
-	hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqh;
-	hctx->ccid2hctx_packets_acked = 0;
+	hc->tx_seqt = hc->tx_seqh;
+	hc->tx_packets_acked = 0;
 
 	/* clear ack ratio state. */
-	hctx->ccid2hctx_rpseq	 = 0;
-	hctx->ccid2hctx_rpdupack = -1;
+	hc->tx_rpseq    = 0;
+	hc->tx_rpdupack = -1;
 	ccid2_change_l_ack_ratio(sk, 1);
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 out:
 	bh_unlock_sock(sk);
 	sock_put(sk);
@@ -212,42 +211,40 @@
 
 static void ccid2_start_rto_timer(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	ccid2_pr_debug("setting RTO timeout=%ld\n", hctx->ccid2hctx_rto);
+	ccid2_pr_debug("setting RTO timeout=%ld\n", hc->tx_rto);
 
-	BUG_ON(timer_pending(&hctx->ccid2hctx_rtotimer));
-	sk_reset_timer(sk, &hctx->ccid2hctx_rtotimer,
-		       jiffies + hctx->ccid2hctx_rto);
+	BUG_ON(timer_pending(&hc->tx_rtotimer));
+	sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto);
 }
 
 static void ccid2_hc_tx_packet_sent(struct sock *sk, int more, unsigned int len)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	struct ccid2_seq *next;
 
-	hctx->ccid2hctx_pipe++;
+	hc->tx_pipe++;
 
-	hctx->ccid2hctx_seqh->ccid2s_seq   = dp->dccps_gss;
-	hctx->ccid2hctx_seqh->ccid2s_acked = 0;
-	hctx->ccid2hctx_seqh->ccid2s_sent  = jiffies;
+	hc->tx_seqh->ccid2s_seq   = dp->dccps_gss;
+	hc->tx_seqh->ccid2s_acked = 0;
+	hc->tx_seqh->ccid2s_sent  = jiffies;
 
-	next = hctx->ccid2hctx_seqh->ccid2s_next;
+	next = hc->tx_seqh->ccid2s_next;
 	/* check if we need to alloc more space */
-	if (next == hctx->ccid2hctx_seqt) {
-		if (ccid2_hc_tx_alloc_seq(hctx)) {
+	if (next == hc->tx_seqt) {
+		if (ccid2_hc_tx_alloc_seq(hc)) {
 			DCCP_CRIT("packet history - out of memory!");
 			/* FIXME: find a more graceful way to bail out */
 			return;
 		}
-		next = hctx->ccid2hctx_seqh->ccid2s_next;
-		BUG_ON(next == hctx->ccid2hctx_seqt);
+		next = hc->tx_seqh->ccid2s_next;
+		BUG_ON(next == hc->tx_seqt);
 	}
-	hctx->ccid2hctx_seqh = next;
+	hc->tx_seqh = next;
 
-	ccid2_pr_debug("cwnd=%d pipe=%d\n", hctx->ccid2hctx_cwnd,
-		       hctx->ccid2hctx_pipe);
+	ccid2_pr_debug("cwnd=%d pipe=%d\n", hc->tx_cwnd, hc->tx_pipe);
 
 	/*
 	 * FIXME: The code below is broken and the variables have been removed
@@ -270,12 +267,12 @@
 	 */
 #if 0
 	/* Ack Ratio.  Need to maintain a concept of how many windows we sent */
-	hctx->ccid2hctx_arsent++;
+	hc->tx_arsent++;
 	/* We had an ack loss in this window... */
-	if (hctx->ccid2hctx_ackloss) {
-		if (hctx->ccid2hctx_arsent >= hctx->ccid2hctx_cwnd) {
-			hctx->ccid2hctx_arsent	= 0;
-			hctx->ccid2hctx_ackloss	= 0;
+	if (hc->tx_ackloss) {
+		if (hc->tx_arsent >= hc->tx_cwnd) {
+			hc->tx_arsent  = 0;
+			hc->tx_ackloss = 0;
 		}
 	} else {
 		/* No acks lost up to now... */
@@ -285,28 +282,28 @@
 			int denom = dp->dccps_l_ack_ratio * dp->dccps_l_ack_ratio -
 				    dp->dccps_l_ack_ratio;
 
-			denom = hctx->ccid2hctx_cwnd * hctx->ccid2hctx_cwnd / denom;
+			denom = hc->tx_cwnd * hc->tx_cwnd / denom;
 
-			if (hctx->ccid2hctx_arsent >= denom) {
+			if (hc->tx_arsent >= denom) {
 				ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio - 1);
-				hctx->ccid2hctx_arsent = 0;
+				hc->tx_arsent = 0;
 			}
 		} else {
 			/* we can't increase ack ratio further [1] */
-			hctx->ccid2hctx_arsent = 0; /* or maybe set it to cwnd*/
+			hc->tx_arsent = 0; /* or maybe set it to cwnd*/
 		}
 	}
 #endif
 
 	/* setup RTO timer */
-	if (!timer_pending(&hctx->ccid2hctx_rtotimer))
+	if (!timer_pending(&hc->tx_rtotimer))
 		ccid2_start_rto_timer(sk);
 
 #ifdef CONFIG_IP_DCCP_CCID2_DEBUG
 	do {
-		struct ccid2_seq *seqp = hctx->ccid2hctx_seqt;
+		struct ccid2_seq *seqp = hc->tx_seqt;
 
-		while (seqp != hctx->ccid2hctx_seqh) {
+		while (seqp != hc->tx_seqh) {
 			ccid2_pr_debug("out seq=%llu acked=%d time=%lu\n",
 				       (unsigned long long)seqp->ccid2s_seq,
 				       seqp->ccid2s_acked, seqp->ccid2s_sent);
@@ -314,7 +311,7 @@
 		}
 	} while (0);
 	ccid2_pr_debug("=========\n");
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 #endif
 }
 
@@ -382,9 +379,9 @@
 
 static void ccid2_hc_tx_kill_rto_timer(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	sk_stop_timer(sk, &hctx->ccid2hctx_rtotimer);
+	sk_stop_timer(sk, &hc->tx_rtotimer);
 	ccid2_pr_debug("deleted RTO timer\n");
 }
 
@@ -392,75 +389,75 @@
 				 struct ccid2_seq *seqp,
 				 unsigned int *maxincr)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh) {
-		if (*maxincr > 0 && ++hctx->ccid2hctx_packets_acked == 2) {
-			hctx->ccid2hctx_cwnd += 1;
-			*maxincr	     -= 1;
-			hctx->ccid2hctx_packets_acked = 0;
+	if (hc->tx_cwnd < hc->tx_ssthresh) {
+		if (*maxincr > 0 && ++hc->tx_packets_acked == 2) {
+			hc->tx_cwnd += 1;
+			*maxincr    -= 1;
+			hc->tx_packets_acked = 0;
 		}
-	} else if (++hctx->ccid2hctx_packets_acked >= hctx->ccid2hctx_cwnd) {
-			hctx->ccid2hctx_cwnd += 1;
-			hctx->ccid2hctx_packets_acked = 0;
+	} else if (++hc->tx_packets_acked >= hc->tx_cwnd) {
+			hc->tx_cwnd += 1;
+			hc->tx_packets_acked = 0;
 	}
 
 	/* update RTO */
-	if (hctx->ccid2hctx_srtt == -1 ||
-	    time_after(jiffies, hctx->ccid2hctx_lastrtt + hctx->ccid2hctx_srtt)) {
+	if (hc->tx_srtt == -1 ||
+	    time_after(jiffies, hc->tx_lastrtt + hc->tx_srtt)) {
 		unsigned long r = (long)jiffies - (long)seqp->ccid2s_sent;
 		int s;
 
 		/* first measurement */
-		if (hctx->ccid2hctx_srtt == -1) {
+		if (hc->tx_srtt == -1) {
 			ccid2_pr_debug("R: %lu Time=%lu seq=%llu\n",
 				       r, jiffies,
 				       (unsigned long long)seqp->ccid2s_seq);
-			ccid2_change_srtt(hctx, r);
-			hctx->ccid2hctx_rttvar = r >> 1;
+			ccid2_change_srtt(hc, r);
+			hc->tx_rttvar = r >> 1;
 		} else {
 			/* RTTVAR */
-			long tmp = hctx->ccid2hctx_srtt - r;
+			long tmp = hc->tx_srtt - r;
 			long srtt;
 
 			if (tmp < 0)
 				tmp *= -1;
 
 			tmp >>= 2;
-			hctx->ccid2hctx_rttvar *= 3;
-			hctx->ccid2hctx_rttvar >>= 2;
-			hctx->ccid2hctx_rttvar += tmp;
+			hc->tx_rttvar *= 3;
+			hc->tx_rttvar >>= 2;
+			hc->tx_rttvar += tmp;
 
 			/* SRTT */
-			srtt = hctx->ccid2hctx_srtt;
+			srtt = hc->tx_srtt;
 			srtt *= 7;
 			srtt >>= 3;
 			tmp = r >> 3;
 			srtt += tmp;
-			ccid2_change_srtt(hctx, srtt);
+			ccid2_change_srtt(hc, srtt);
 		}
-		s = hctx->ccid2hctx_rttvar << 2;
+		s = hc->tx_rttvar << 2;
 		/* clock granularity is 1 when based on jiffies */
 		if (!s)
 			s = 1;
-		hctx->ccid2hctx_rto = hctx->ccid2hctx_srtt + s;
+		hc->tx_rto = hc->tx_srtt + s;
 
 		/* must be at least a second */
-		s = hctx->ccid2hctx_rto / HZ;
+		s = hc->tx_rto / HZ;
 		/* DCCP doesn't require this [but I like it cuz my code sux] */
 #if 1
 		if (s < 1)
-			hctx->ccid2hctx_rto = HZ;
+			hc->tx_rto = HZ;
 #endif
 		/* max 60 seconds */
 		if (s > 60)
-			hctx->ccid2hctx_rto = HZ * 60;
+			hc->tx_rto = HZ * 60;
 
-		hctx->ccid2hctx_lastrtt = jiffies;
+		hc->tx_lastrtt = jiffies;
 
 		ccid2_pr_debug("srtt: %ld rttvar: %ld rto: %ld (HZ=%d) R=%lu\n",
-			       hctx->ccid2hctx_srtt, hctx->ccid2hctx_rttvar,
-			       hctx->ccid2hctx_rto, HZ, r);
+			       hc->tx_srtt, hc->tx_rttvar,
+			       hc->tx_rto, HZ, r);
 	}
 
 	/* we got a new ack, so re-start RTO timer */
@@ -470,40 +467,40 @@
 
 static void ccid2_hc_tx_dec_pipe(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (hctx->ccid2hctx_pipe == 0)
+	if (hc->tx_pipe == 0)
 		DCCP_BUG("pipe == 0");
 	else
-		hctx->ccid2hctx_pipe--;
+		hc->tx_pipe--;
 
-	if (hctx->ccid2hctx_pipe == 0)
+	if (hc->tx_pipe == 0)
 		ccid2_hc_tx_kill_rto_timer(sk);
 }
 
 static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 
-	if (time_before(seqp->ccid2s_sent, hctx->ccid2hctx_last_cong)) {
+	if (time_before(seqp->ccid2s_sent, hc->tx_last_cong)) {
 		ccid2_pr_debug("Multiple losses in an RTT---treating as one\n");
 		return;
 	}
 
-	hctx->ccid2hctx_last_cong = jiffies;
+	hc->tx_last_cong = jiffies;
 
-	hctx->ccid2hctx_cwnd     = hctx->ccid2hctx_cwnd / 2 ? : 1U;
-	hctx->ccid2hctx_ssthresh = max(hctx->ccid2hctx_cwnd, 2U);
+	hc->tx_cwnd      = hc->tx_cwnd / 2 ? : 1U;
+	hc->tx_ssthresh  = max(hc->tx_cwnd, 2U);
 
 	/* Avoid spurious timeouts resulting from Ack Ratio > cwnd */
-	if (dccp_sk(sk)->dccps_l_ack_ratio > hctx->ccid2hctx_cwnd)
-		ccid2_change_l_ack_ratio(sk, hctx->ccid2hctx_cwnd);
+	if (dccp_sk(sk)->dccps_l_ack_ratio > hc->tx_cwnd)
+		ccid2_change_l_ack_ratio(sk, hc->tx_cwnd);
 }
 
 static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	u64 ackno, seqno;
 	struct ccid2_seq *seqp;
 	unsigned char *vector;
@@ -512,7 +509,7 @@
 	int done = 0;
 	unsigned int maxincr = 0;
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 	/* check reverse path congestion */
 	seqno = DCCP_SKB_CB(skb)->dccpd_seq;
 
@@ -521,21 +518,21 @@
 	 * -sorbo.
 	 */
 	/* need to bootstrap */
-	if (hctx->ccid2hctx_rpdupack == -1) {
-		hctx->ccid2hctx_rpdupack = 0;
-		hctx->ccid2hctx_rpseq = seqno;
+	if (hc->tx_rpdupack == -1) {
+		hc->tx_rpdupack = 0;
+		hc->tx_rpseq    = seqno;
 	} else {
 		/* check if packet is consecutive */
-		if (dccp_delta_seqno(hctx->ccid2hctx_rpseq, seqno) == 1)
-			hctx->ccid2hctx_rpseq = seqno;
+		if (dccp_delta_seqno(hc->tx_rpseq, seqno) == 1)
+			hc->tx_rpseq = seqno;
 		/* it's a later packet */
-		else if (after48(seqno, hctx->ccid2hctx_rpseq)) {
-			hctx->ccid2hctx_rpdupack++;
+		else if (after48(seqno, hc->tx_rpseq)) {
+			hc->tx_rpdupack++;
 
 			/* check if we got enough dupacks */
-			if (hctx->ccid2hctx_rpdupack >= NUMDUPACK) {
-				hctx->ccid2hctx_rpdupack = -1; /* XXX lame */
-				hctx->ccid2hctx_rpseq = 0;
+			if (hc->tx_rpdupack >= NUMDUPACK) {
+				hc->tx_rpdupack = -1; /* XXX lame */
+				hc->tx_rpseq    = 0;
 
 				ccid2_change_l_ack_ratio(sk, 2 * dp->dccps_l_ack_ratio);
 			}
@@ -544,7 +541,7 @@
 
 	/* check forward path congestion */
 	/* still didn't send out new data packets */
-	if (hctx->ccid2hctx_seqh == hctx->ccid2hctx_seqt)
+	if (hc->tx_seqh == hc->tx_seqt)
 		return;
 
 	switch (DCCP_SKB_CB(skb)->dccpd_type) {
@@ -556,14 +553,14 @@
 	}
 
 	ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq;
-	if (after48(ackno, hctx->ccid2hctx_high_ack))
-		hctx->ccid2hctx_high_ack = ackno;
+	if (after48(ackno, hc->tx_high_ack))
+		hc->tx_high_ack = ackno;
 
-	seqp = hctx->ccid2hctx_seqt;
+	seqp = hc->tx_seqt;
 	while (before48(seqp->ccid2s_seq, ackno)) {
 		seqp = seqp->ccid2s_next;
-		if (seqp == hctx->ccid2hctx_seqh) {
-			seqp = hctx->ccid2hctx_seqh->ccid2s_prev;
+		if (seqp == hc->tx_seqh) {
+			seqp = hc->tx_seqh->ccid2s_prev;
 			break;
 		}
 	}
@@ -573,7 +570,7 @@
 	 * packets per acknowledgement. Rounding up avoids that cwnd is not
 	 * advanced when Ack Ratio is 1 and gives a slight edge otherwise.
 	 */
-	if (hctx->ccid2hctx_cwnd < hctx->ccid2hctx_ssthresh)
+	if (hc->tx_cwnd < hc->tx_ssthresh)
 		maxincr = DIV_ROUND_UP(dp->dccps_l_ack_ratio, 2);
 
 	/* go through all ack vectors */
@@ -592,7 +589,7 @@
 			 * seqnos.
 			 */
 			while (after48(seqp->ccid2s_seq, ackno)) {
-				if (seqp == hctx->ccid2hctx_seqt) {
+				if (seqp == hc->tx_seqt) {
 					done = 1;
 					break;
 				}
@@ -624,7 +621,7 @@
 						       (unsigned long long)seqp->ccid2s_seq);
 					ccid2_hc_tx_dec_pipe(sk);
 				}
-				if (seqp == hctx->ccid2hctx_seqt) {
+				if (seqp == hc->tx_seqt) {
 					done = 1;
 					break;
 				}
@@ -643,11 +640,11 @@
 	/* The state about what is acked should be correct now
 	 * Check for NUMDUPACK
 	 */
-	seqp = hctx->ccid2hctx_seqt;
-	while (before48(seqp->ccid2s_seq, hctx->ccid2hctx_high_ack)) {
+	seqp = hc->tx_seqt;
+	while (before48(seqp->ccid2s_seq, hc->tx_high_ack)) {
 		seqp = seqp->ccid2s_next;
-		if (seqp == hctx->ccid2hctx_seqh) {
-			seqp = hctx->ccid2hctx_seqh->ccid2s_prev;
+		if (seqp == hc->tx_seqh) {
+			seqp = hc->tx_seqh->ccid2s_prev;
 			break;
 		}
 	}
@@ -658,7 +655,7 @@
 			if (done == NUMDUPACK)
 				break;
 		}
-		if (seqp == hctx->ccid2hctx_seqt)
+		if (seqp == hc->tx_seqt)
 			break;
 		seqp = seqp->ccid2s_prev;
 	}
@@ -681,86 +678,86 @@
 				ccid2_congestion_event(sk, seqp);
 				ccid2_hc_tx_dec_pipe(sk);
 			}
-			if (seqp == hctx->ccid2hctx_seqt)
+			if (seqp == hc->tx_seqt)
 				break;
 			seqp = seqp->ccid2s_prev;
 		}
 
-		hctx->ccid2hctx_seqt = last_acked;
+		hc->tx_seqt = last_acked;
 	}
 
 	/* trim acked packets in tail */
-	while (hctx->ccid2hctx_seqt != hctx->ccid2hctx_seqh) {
-		if (!hctx->ccid2hctx_seqt->ccid2s_acked)
+	while (hc->tx_seqt != hc->tx_seqh) {
+		if (!hc->tx_seqt->ccid2s_acked)
 			break;
 
-		hctx->ccid2hctx_seqt = hctx->ccid2hctx_seqt->ccid2s_next;
+		hc->tx_seqt = hc->tx_seqt->ccid2s_next;
 	}
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 }
 
 static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid_priv(ccid);
+	struct ccid2_hc_tx_sock *hc = ccid_priv(ccid);
 	struct dccp_sock *dp = dccp_sk(sk);
 	u32 max_ratio;
 
 	/* RFC 4341, 5: initialise ssthresh to arbitrarily high (max) value */
-	hctx->ccid2hctx_ssthresh  = ~0U;
+	hc->tx_ssthresh = ~0U;
 
 	/*
 	 * RFC 4341, 5: "The cwnd parameter is initialized to at most four
 	 * packets for new connections, following the rules from [RFC3390]".
 	 * We need to convert the bytes of RFC3390 into the packets of RFC 4341.
 	 */
-	hctx->ccid2hctx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U);
+	hc->tx_cwnd = clamp(4380U / dp->dccps_mss_cache, 2U, 4U);
 
 	/* Make sure that Ack Ratio is enabled and within bounds. */
-	max_ratio = DIV_ROUND_UP(hctx->ccid2hctx_cwnd, 2);
+	max_ratio = DIV_ROUND_UP(hc->tx_cwnd, 2);
 	if (dp->dccps_l_ack_ratio == 0 || dp->dccps_l_ack_ratio > max_ratio)
 		dp->dccps_l_ack_ratio = max_ratio;
 
 	/* XXX init ~ to window size... */
-	if (ccid2_hc_tx_alloc_seq(hctx))
+	if (ccid2_hc_tx_alloc_seq(hc))
 		return -ENOMEM;
 
-	hctx->ccid2hctx_rto	 = 3 * HZ;
-	ccid2_change_srtt(hctx, -1);
-	hctx->ccid2hctx_rttvar	 = -1;
-	hctx->ccid2hctx_rpdupack = -1;
-	hctx->ccid2hctx_last_cong = jiffies;
-	setup_timer(&hctx->ccid2hctx_rtotimer, ccid2_hc_tx_rto_expire,
+	hc->tx_rto	 = 3 * HZ;
+	ccid2_change_srtt(hc, -1);
+	hc->tx_rttvar    = -1;
+	hc->tx_rpdupack  = -1;
+	hc->tx_last_cong = jiffies;
+	setup_timer(&hc->tx_rtotimer, ccid2_hc_tx_rto_expire,
 			(unsigned long)sk);
 
-	ccid2_hc_tx_check_sanity(hctx);
+	ccid2_hc_tx_check_sanity(hc);
 	return 0;
 }
 
 static void ccid2_hc_tx_exit(struct sock *sk)
 {
-	struct ccid2_hc_tx_sock *hctx = ccid2_hc_tx_sk(sk);
+	struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk);
 	int i;
 
 	ccid2_hc_tx_kill_rto_timer(sk);
 
-	for (i = 0; i < hctx->ccid2hctx_seqbufc; i++)
-		kfree(hctx->ccid2hctx_seqbuf[i]);
-	hctx->ccid2hctx_seqbufc = 0;
+	for (i = 0; i < hc->tx_seqbufc; i++)
+		kfree(hc->tx_seqbuf[i]);
+	hc->tx_seqbufc = 0;
 }
 
 static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
 	const struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid2_hc_rx_sock *hcrx = ccid2_hc_rx_sk(sk);
+	struct ccid2_hc_rx_sock *hc = ccid2_hc_rx_sk(sk);
 
 	switch (DCCP_SKB_CB(skb)->dccpd_type) {
 	case DCCP_PKT_DATA:
 	case DCCP_PKT_DATAACK:
-		hcrx->ccid2hcrx_data++;
-		if (hcrx->ccid2hcrx_data >= dp->dccps_r_ack_ratio) {
+		hc->rx_data++;
+		if (hc->rx_data >= dp->dccps_r_ack_ratio) {
 			dccp_send_ack(sk);
-			hcrx->ccid2hcrx_data = 0;
+			hc->rx_data = 0;
 		}
 		break;
 	}
diff --git a/net/dccp/ccids/ccid2.h b/net/dccp/ccids/ccid2.h
index 326ac90..1ec6a30 100644
--- a/net/dccp/ccids/ccid2.h
+++ b/net/dccp/ccids/ccid2.h
@@ -40,34 +40,34 @@
 
 /**
  * struct ccid2_hc_tx_sock - CCID2 TX half connection
- * @ccid2hctx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5
- * @ccid2hctx_packets_acked - Ack counter for deriving cwnd growth (RFC 3465)
- * @ccid2hctx_lastrtt -time RTT was last measured
- * @ccid2hctx_rpseq - last consecutive seqno
- * @ccid2hctx_rpdupack - dupacks since rpseq
+ * @tx_{cwnd,ssthresh,pipe}: as per RFC 4341, section 5
+ * @tx_packets_acked:	     Ack counter for deriving cwnd growth (RFC 3465)
+ * @tx_lastrtt:		     time RTT was last measured
+ * @tx_rpseq:		     last consecutive seqno
+ * @tx_rpdupack:	     dupacks since rpseq
  */
 struct ccid2_hc_tx_sock {
-	u32			ccid2hctx_cwnd;
-	u32			ccid2hctx_ssthresh;
-	u32			ccid2hctx_pipe;
-	u32			ccid2hctx_packets_acked;
-	struct ccid2_seq	*ccid2hctx_seqbuf[CCID2_SEQBUF_MAX];
-	int			ccid2hctx_seqbufc;
-	struct ccid2_seq	*ccid2hctx_seqh;
-	struct ccid2_seq	*ccid2hctx_seqt;
-	long			ccid2hctx_rto;
-	long			ccid2hctx_srtt;
-	long			ccid2hctx_rttvar;
-	unsigned long		ccid2hctx_lastrtt;
-	struct timer_list	ccid2hctx_rtotimer;
-	u64			ccid2hctx_rpseq;
-	int			ccid2hctx_rpdupack;
-	unsigned long		ccid2hctx_last_cong;
-	u64			ccid2hctx_high_ack;
+	u32			tx_cwnd;
+	u32			tx_ssthresh;
+	u32			tx_pipe;
+	u32			tx_packets_acked;
+	struct ccid2_seq	*tx_seqbuf[CCID2_SEQBUF_MAX];
+	int			tx_seqbufc;
+	struct ccid2_seq	*tx_seqh;
+	struct ccid2_seq	*tx_seqt;
+	long			tx_rto;
+	long			tx_srtt;
+	long			tx_rttvar;
+	unsigned long		tx_lastrtt;
+	struct timer_list	tx_rtotimer;
+	u64			tx_rpseq;
+	int			tx_rpdupack;
+	unsigned long		tx_last_cong;
+	u64			tx_high_ack;
 };
 
 struct ccid2_hc_rx_sock {
-	int	ccid2hcrx_data;
+	int	rx_data;
 };
 
 static inline struct ccid2_hc_tx_sock *ccid2_hc_tx_sk(const struct sock *sk)
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index 34dcc79..bcd7632 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -64,14 +64,14 @@
 static void ccid3_hc_tx_set_state(struct sock *sk,
 				  enum ccid3_hc_tx_states state)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	enum ccid3_hc_tx_states oldstate = hctx->ccid3hctx_state;
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	enum ccid3_hc_tx_states oldstate = hc->tx_state;
 
 	ccid3_pr_debug("%s(%p) %-8.8s -> %s\n",
 		       dccp_role(sk), sk, ccid3_tx_state_name(oldstate),
 		       ccid3_tx_state_name(state));
 	WARN_ON(state == oldstate);
-	hctx->ccid3hctx_state = state;
+	hc->tx_state = state;
 }
 
 /*
@@ -85,37 +85,32 @@
  */
 static inline u64 rfc3390_initial_rate(struct sock *sk)
 {
-	const struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	const __u32 w_init = clamp_t(__u32, 4380U,
-			2 * hctx->ccid3hctx_s, 4 * hctx->ccid3hctx_s);
+	const struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	const __u32 w_init = clamp_t(__u32, 4380U, 2 * hc->tx_s, 4 * hc->tx_s);
 
-	return scaled_div(w_init << 6, hctx->ccid3hctx_rtt);
+	return scaled_div(w_init << 6, hc->tx_rtt);
 }
 
 /*
  * Recalculate t_ipi and delta (should be called whenever X changes)
  */
-static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hctx)
+static void ccid3_update_send_interval(struct ccid3_hc_tx_sock *hc)
 {
 	/* Calculate new t_ipi = s / X_inst (X_inst is in 64 * bytes/second) */
-	hctx->ccid3hctx_t_ipi = scaled_div32(((u64)hctx->ccid3hctx_s) << 6,
-					     hctx->ccid3hctx_x);
+	hc->tx_t_ipi = scaled_div32(((u64)hc->tx_s) << 6, hc->tx_x);
 
 	/* Calculate new delta by delta = min(t_ipi / 2, t_gran / 2) */
-	hctx->ccid3hctx_delta = min_t(u32, hctx->ccid3hctx_t_ipi / 2,
-					   TFRC_OPSYS_HALF_TIME_GRAN);
+	hc->tx_delta = min_t(u32, hc->tx_t_ipi / 2, TFRC_OPSYS_HALF_TIME_GRAN);
 
-	ccid3_pr_debug("t_ipi=%u, delta=%u, s=%u, X=%u\n",
-		       hctx->ccid3hctx_t_ipi, hctx->ccid3hctx_delta,
-		       hctx->ccid3hctx_s, (unsigned)(hctx->ccid3hctx_x >> 6));
-
+	ccid3_pr_debug("t_ipi=%u, delta=%u, s=%u, X=%u\n", hc->tx_t_ipi,
+		       hc->tx_delta, hc->tx_s, (unsigned)(hc->tx_x >> 6));
 }
 
-static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hctx, ktime_t now)
+static u32 ccid3_hc_tx_idle_rtt(struct ccid3_hc_tx_sock *hc, ktime_t now)
 {
-	u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
+	u32 delta = ktime_us_delta(now, hc->tx_t_last_win_count);
 
-	return delta / hctx->ccid3hctx_rtt;
+	return delta / hc->tx_rtt;
 }
 
 /**
@@ -130,9 +125,9 @@
  */
 static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
-	__u64 min_rate = 2 * hctx->ccid3hctx_x_recv;
-	const  __u64 old_x = hctx->ccid3hctx_x;
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
+	__u64 min_rate = 2 * hc->tx_x_recv;
+	const __u64 old_x = hc->tx_x;
 	ktime_t now = stamp ? *stamp : ktime_get_real();
 
 	/*
@@ -141,37 +136,31 @@
 	 * a sender is idle if it has not sent anything over a 2-RTT-period.
 	 * For consistency with X and X_recv, min_rate is also scaled by 2^6.
 	 */
-	if (ccid3_hc_tx_idle_rtt(hctx, now) >= 2) {
+	if (ccid3_hc_tx_idle_rtt(hc, now) >= 2) {
 		min_rate = rfc3390_initial_rate(sk);
-		min_rate = max(min_rate, 2 * hctx->ccid3hctx_x_recv);
+		min_rate = max(min_rate, 2 * hc->tx_x_recv);
 	}
 
-	if (hctx->ccid3hctx_p > 0) {
+	if (hc->tx_p > 0) {
 
-		hctx->ccid3hctx_x = min(((__u64)hctx->ccid3hctx_x_calc) << 6,
-					min_rate);
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
-					(((__u64)hctx->ccid3hctx_s) << 6) /
-								TFRC_T_MBI);
+		hc->tx_x = min(((__u64)hc->tx_x_calc) << 6, min_rate);
+		hc->tx_x = max(hc->tx_x, (((__u64)hc->tx_s) << 6) / TFRC_T_MBI);
 
-	} else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld)
-				- (s64)hctx->ccid3hctx_rtt >= 0) {
+	} else if (ktime_us_delta(now, hc->tx_t_ld) - (s64)hc->tx_rtt >= 0) {
 
-		hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate);
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
-			    scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
-				       hctx->ccid3hctx_rtt));
-		hctx->ccid3hctx_t_ld = now;
+		hc->tx_x = min(2 * hc->tx_x, min_rate);
+		hc->tx_x = max(hc->tx_x,
+			       scaled_div(((__u64)hc->tx_s) << 6, hc->tx_rtt));
+		hc->tx_t_ld = now;
 	}
 
-	if (hctx->ccid3hctx_x != old_x) {
+	if (hc->tx_x != old_x) {
 		ccid3_pr_debug("X_prev=%u, X_now=%u, X_calc=%u, "
 			       "X_recv=%u\n", (unsigned)(old_x >> 6),
-			       (unsigned)(hctx->ccid3hctx_x >> 6),
-			       hctx->ccid3hctx_x_calc,
-			       (unsigned)(hctx->ccid3hctx_x_recv >> 6));
+			       (unsigned)(hc->tx_x >> 6), hc->tx_x_calc,
+			       (unsigned)(hc->tx_x_recv >> 6));
 
-		ccid3_update_send_interval(hctx);
+		ccid3_update_send_interval(hc);
 	}
 }
 
@@ -179,37 +168,37 @@
  *	Track the mean packet size `s' (cf. RFC 4342, 5.3 and  RFC 3448, 4.1)
  *	@len: DCCP packet payload size in bytes
  */
-static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len)
+static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hc, int len)
 {
-	const u16 old_s = hctx->ccid3hctx_s;
+	const u16 old_s = hc->tx_s;
 
-	hctx->ccid3hctx_s = tfrc_ewma(hctx->ccid3hctx_s, len, 9);
+	hc->tx_s = tfrc_ewma(hc->tx_s, len, 9);
 
-	if (hctx->ccid3hctx_s != old_s)
-		ccid3_update_send_interval(hctx);
+	if (hc->tx_s != old_s)
+		ccid3_update_send_interval(hc);
 }
 
 /*
  *	Update Window Counter using the algorithm from [RFC 4342, 8.1].
  *	As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
  */
-static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
+static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hc,
 						ktime_t now)
 {
-	u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
-	    quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
+	u32 delta = ktime_us_delta(now, hc->tx_t_last_win_count),
+	    quarter_rtts = (4 * delta) / hc->tx_rtt;
 
 	if (quarter_rtts > 0) {
-		hctx->ccid3hctx_t_last_win_count = now;
-		hctx->ccid3hctx_last_win_count  += min(quarter_rtts, 5U);
-		hctx->ccid3hctx_last_win_count	&= 0xF;		/* mod 16 */
+		hc->tx_t_last_win_count = now;
+		hc->tx_last_win_count  += min(quarter_rtts, 5U);
+		hc->tx_last_win_count  &= 0xF;		/* mod 16 */
 	}
 }
 
 static void ccid3_hc_tx_no_feedback_timer(unsigned long data)
 {
 	struct sock *sk = (struct sock *)data;
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	unsigned long t_nfb = USEC_PER_SEC / 5;
 
 	bh_lock_sock(sk);
@@ -220,24 +209,23 @@
 	}
 
 	ccid3_pr_debug("%s(%p, state=%s) - entry \n", dccp_role(sk), sk,
-		       ccid3_tx_state_name(hctx->ccid3hctx_state));
+		       ccid3_tx_state_name(hc->tx_state));
 
-	if (hctx->ccid3hctx_state == TFRC_SSTATE_FBACK)
+	if (hc->tx_state == TFRC_SSTATE_FBACK)
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
-	else if (hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK)
+	else if (hc->tx_state != TFRC_SSTATE_NO_FBACK)
 		goto out;
 
 	/*
 	 * Determine new allowed sending rate X as per draft rfc3448bis-00, 4.4
 	 */
-	if (hctx->ccid3hctx_t_rto == 0 ||	/* no feedback received yet */
-	    hctx->ccid3hctx_p == 0) {
+	if (hc->tx_t_rto == 0 ||	/* no feedback received yet */
+	    hc->tx_p == 0) {
 
 		/* halve send rate directly */
-		hctx->ccid3hctx_x = max(hctx->ccid3hctx_x / 2,
-					(((__u64)hctx->ccid3hctx_s) << 6) /
-								    TFRC_T_MBI);
-		ccid3_update_send_interval(hctx);
+		hc->tx_x = max(hc->tx_x / 2,
+			       (((__u64)hc->tx_s) << 6) / TFRC_T_MBI);
+		ccid3_update_send_interval(hc);
 	} else {
 		/*
 		 *  Modify the cached value of X_recv
@@ -249,33 +237,32 @@
 		 *
 		 *  Note that X_recv is scaled by 2^6 while X_calc is not
 		 */
-		BUG_ON(hctx->ccid3hctx_p && !hctx->ccid3hctx_x_calc);
+		BUG_ON(hc->tx_p && !hc->tx_x_calc);
 
-		if (hctx->ccid3hctx_x_calc > (hctx->ccid3hctx_x_recv >> 5))
-			hctx->ccid3hctx_x_recv =
-				max(hctx->ccid3hctx_x_recv / 2,
-				    (((__u64)hctx->ccid3hctx_s) << 6) /
-							      (2 * TFRC_T_MBI));
+		if (hc->tx_x_calc > (hc->tx_x_recv >> 5))
+			hc->tx_x_recv =
+				max(hc->tx_x_recv / 2,
+				    (((__u64)hc->tx_s) << 6) / (2*TFRC_T_MBI));
 		else {
-			hctx->ccid3hctx_x_recv = hctx->ccid3hctx_x_calc;
-			hctx->ccid3hctx_x_recv <<= 4;
+			hc->tx_x_recv = hc->tx_x_calc;
+			hc->tx_x_recv <<= 4;
 		}
 		ccid3_hc_tx_update_x(sk, NULL);
 	}
 	ccid3_pr_debug("Reduced X to %llu/64 bytes/sec\n",
-			(unsigned long long)hctx->ccid3hctx_x);
+			(unsigned long long)hc->tx_x);
 
 	/*
 	 * Set new timeout for the nofeedback timer.
 	 * See comments in packet_recv() regarding the value of t_RTO.
 	 */
-	if (unlikely(hctx->ccid3hctx_t_rto == 0))	/* no feedback yet */
+	if (unlikely(hc->tx_t_rto == 0))	/* no feedback yet */
 		t_nfb = TFRC_INITIAL_TIMEOUT;
 	else
-		t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
+		t_nfb = max(hc->tx_t_rto, 2 * hc->tx_t_ipi);
 
 restart_timer:
-	sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
+	sk_reset_timer(sk, &hc->tx_no_feedback_timer,
 			   jiffies + usecs_to_jiffies(t_nfb));
 out:
 	bh_unlock_sock(sk);
@@ -291,7 +278,7 @@
 static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb)
 {
 	struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	ktime_t now = ktime_get_real();
 	s64 delay;
 
@@ -303,18 +290,17 @@
 	if (unlikely(skb->len == 0))
 		return -EBADMSG;
 
-	switch (hctx->ccid3hctx_state) {
+	switch (hc->tx_state) {
 	case TFRC_SSTATE_NO_SENT:
-		sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
-			       (jiffies +
-				usecs_to_jiffies(TFRC_INITIAL_TIMEOUT)));
-		hctx->ccid3hctx_last_win_count	 = 0;
-		hctx->ccid3hctx_t_last_win_count = now;
+		sk_reset_timer(sk, &hc->tx_no_feedback_timer, (jiffies +
+			       usecs_to_jiffies(TFRC_INITIAL_TIMEOUT)));
+		hc->tx_last_win_count	= 0;
+		hc->tx_t_last_win_count = now;
 
 		/* Set t_0 for initial packet */
-		hctx->ccid3hctx_t_nom = now;
+		hc->tx_t_nom = now;
 
-		hctx->ccid3hctx_s = skb->len;
+		hc->tx_s = skb->len;
 
 		/*
 		 * Use initial RTT sample when available: recommended by erratum
@@ -323,9 +309,9 @@
 		 */
 		if (dp->dccps_syn_rtt) {
 			ccid3_pr_debug("SYN RTT = %uus\n", dp->dccps_syn_rtt);
-			hctx->ccid3hctx_rtt  = dp->dccps_syn_rtt;
-			hctx->ccid3hctx_x    = rfc3390_initial_rate(sk);
-			hctx->ccid3hctx_t_ld = now;
+			hc->tx_rtt  = dp->dccps_syn_rtt;
+			hc->tx_x    = rfc3390_initial_rate(sk);
+			hc->tx_t_ld = now;
 		} else {
 			/*
 			 * Sender does not have RTT sample:
@@ -333,17 +319,17 @@
 			 *   is needed in several parts (e.g.  window counter);
 			 * - set sending rate X_pps = 1pps as per RFC 3448, 4.2.
 			 */
-			hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT;
-			hctx->ccid3hctx_x   = hctx->ccid3hctx_s;
-			hctx->ccid3hctx_x <<= 6;
+			hc->tx_rtt = DCCP_FALLBACK_RTT;
+			hc->tx_x   = hc->tx_s;
+			hc->tx_x <<= 6;
 		}
-		ccid3_update_send_interval(hctx);
+		ccid3_update_send_interval(hc);
 
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_NO_FBACK);
 		break;
 	case TFRC_SSTATE_NO_FBACK:
 	case TFRC_SSTATE_FBACK:
-		delay = ktime_us_delta(hctx->ccid3hctx_t_nom, now);
+		delay = ktime_us_delta(hc->tx_t_nom, now);
 		ccid3_pr_debug("delay=%ld\n", (long)delay);
 		/*
 		 *	Scheduling of packet transmissions [RFC 3448, 4.6]
@@ -353,10 +339,10 @@
 		 * else
 		 *       // send the packet in (t_nom - t_now) milliseconds.
 		 */
-		if (delay - (s64)hctx->ccid3hctx_delta >= 1000)
+		if (delay - (s64)hc->tx_delta >= 1000)
 			return (u32)delay / 1000L;
 
-		ccid3_hc_tx_update_win_count(hctx, now);
+		ccid3_hc_tx_update_win_count(hc, now);
 		break;
 	case TFRC_SSTATE_TERM:
 		DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
@@ -365,28 +351,27 @@
 
 	/* prepare to send now (add options etc.) */
 	dp->dccps_hc_tx_insert_options = 1;
-	DCCP_SKB_CB(skb)->dccpd_ccval = hctx->ccid3hctx_last_win_count;
+	DCCP_SKB_CB(skb)->dccpd_ccval  = hc->tx_last_win_count;
 
 	/* set the nominal send time for the next following packet */
-	hctx->ccid3hctx_t_nom = ktime_add_us(hctx->ccid3hctx_t_nom,
-					     hctx->ccid3hctx_t_ipi);
+	hc->tx_t_nom = ktime_add_us(hc->tx_t_nom, hc->tx_t_ipi);
 	return 0;
 }
 
 static void ccid3_hc_tx_packet_sent(struct sock *sk, int more,
 				    unsigned int len)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 
-	ccid3_hc_tx_update_s(hctx, len);
+	ccid3_hc_tx_update_s(hc, len);
 
-	if (tfrc_tx_hist_add(&hctx->ccid3hctx_hist, dccp_sk(sk)->dccps_gss))
+	if (tfrc_tx_hist_add(&hc->tx_hist, dccp_sk(sk)->dccps_gss))
 		DCCP_CRIT("packet history - out of memory!");
 }
 
 static void ccid3_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	struct ccid3_options_received *opt_recv;
 	ktime_t now;
 	unsigned long t_nfb;
@@ -397,15 +382,15 @@
 	      DCCP_SKB_CB(skb)->dccpd_type == DCCP_PKT_DATAACK))
 		return;
 	/* ... and only in the established state */
-	if (hctx->ccid3hctx_state != TFRC_SSTATE_FBACK &&
-	    hctx->ccid3hctx_state != TFRC_SSTATE_NO_FBACK)
+	if (hc->tx_state != TFRC_SSTATE_FBACK &&
+	    hc->tx_state != TFRC_SSTATE_NO_FBACK)
 		return;
 
-	opt_recv = &hctx->ccid3hctx_options_received;
+	opt_recv = &hc->tx_options_received;
 	now = ktime_get_real();
 
 	/* Estimate RTT from history if ACK number is valid */
-	r_sample = tfrc_tx_hist_rtt(hctx->ccid3hctx_hist,
+	r_sample = tfrc_tx_hist_rtt(hc->tx_hist,
 				    DCCP_SKB_CB(skb)->dccpd_ack_seq, now);
 	if (r_sample == 0) {
 		DCCP_WARN("%s(%p): %s with bogus ACK-%llu\n", dccp_role(sk), sk,
@@ -415,37 +400,37 @@
 	}
 
 	/* Update receive rate in units of 64 * bytes/second */
-	hctx->ccid3hctx_x_recv = opt_recv->ccid3or_receive_rate;
-	hctx->ccid3hctx_x_recv <<= 6;
+	hc->tx_x_recv = opt_recv->ccid3or_receive_rate;
+	hc->tx_x_recv <<= 6;
 
 	/* Update loss event rate (which is scaled by 1e6) */
 	pinv = opt_recv->ccid3or_loss_event_rate;
 	if (pinv == ~0U || pinv == 0)	       /* see RFC 4342, 8.5   */
-		hctx->ccid3hctx_p = 0;
+		hc->tx_p = 0;
 	else				       /* can not exceed 100% */
-		hctx->ccid3hctx_p = scaled_div(1, pinv);
+		hc->tx_p = scaled_div(1, pinv);
 	/*
 	 * Validate new RTT sample and update moving average
 	 */
 	r_sample = dccp_sample_rtt(sk, r_sample);
-	hctx->ccid3hctx_rtt = tfrc_ewma(hctx->ccid3hctx_rtt, r_sample, 9);
+	hc->tx_rtt = tfrc_ewma(hc->tx_rtt, r_sample, 9);
 	/*
 	 * Update allowed sending rate X as per draft rfc3448bis-00, 4.2/3
 	 */
-	if (hctx->ccid3hctx_state == TFRC_SSTATE_NO_FBACK) {
+	if (hc->tx_state == TFRC_SSTATE_NO_FBACK) {
 		ccid3_hc_tx_set_state(sk, TFRC_SSTATE_FBACK);
 
-		if (hctx->ccid3hctx_t_rto == 0) {
+		if (hc->tx_t_rto == 0) {
 			/*
 			 * Initial feedback packet: Larger Initial Windows (4.2)
 			 */
-			hctx->ccid3hctx_x    = rfc3390_initial_rate(sk);
-			hctx->ccid3hctx_t_ld = now;
+			hc->tx_x    = rfc3390_initial_rate(sk);
+			hc->tx_t_ld = now;
 
-			ccid3_update_send_interval(hctx);
+			ccid3_update_send_interval(hc);
 
 			goto done_computing_x;
-		} else if (hctx->ccid3hctx_p == 0) {
+		} else if (hc->tx_p == 0) {
 			/*
 			 * First feedback after nofeedback timer expiry (4.3)
 			 */
@@ -454,25 +439,20 @@
 	}
 
 	/* Update sending rate (step 4 of [RFC 3448, 4.3]) */
-	if (hctx->ccid3hctx_p > 0)
-		hctx->ccid3hctx_x_calc =
-				tfrc_calc_x(hctx->ccid3hctx_s,
-					    hctx->ccid3hctx_rtt,
-					    hctx->ccid3hctx_p);
+	if (hc->tx_p > 0)
+		hc->tx_x_calc = tfrc_calc_x(hc->tx_s, hc->tx_rtt, hc->tx_p);
 	ccid3_hc_tx_update_x(sk, &now);
 
 done_computing_x:
 	ccid3_pr_debug("%s(%p), RTT=%uus (sample=%uus), s=%u, "
 			       "p=%u, X_calc=%u, X_recv=%u, X=%u\n",
-			       dccp_role(sk),
-			       sk, hctx->ccid3hctx_rtt, r_sample,
-			       hctx->ccid3hctx_s, hctx->ccid3hctx_p,
-			       hctx->ccid3hctx_x_calc,
-			       (unsigned)(hctx->ccid3hctx_x_recv >> 6),
-			       (unsigned)(hctx->ccid3hctx_x >> 6));
+			       dccp_role(sk), sk, hc->tx_rtt, r_sample,
+			       hc->tx_s, hc->tx_p, hc->tx_x_calc,
+			       (unsigned)(hc->tx_x_recv >> 6),
+			       (unsigned)(hc->tx_x >> 6));
 
 	/* unschedule no feedback timer */
-	sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer);
+	sk_stop_timer(sk, &hc->tx_no_feedback_timer);
 
 	/*
 	 * As we have calculated new ipi, delta, t_nom it is possible
@@ -486,21 +466,19 @@
 	 * This can help avoid triggering the nofeedback timer too
 	 * often ('spinning') on LANs with small RTTs.
 	 */
-	hctx->ccid3hctx_t_rto = max_t(u32, 4 * hctx->ccid3hctx_rtt,
-					   (CONFIG_IP_DCCP_CCID3_RTO *
-					    (USEC_PER_SEC / 1000)));
+	hc->tx_t_rto = max_t(u32, 4 * hc->tx_rtt, (CONFIG_IP_DCCP_CCID3_RTO *
+						       (USEC_PER_SEC / 1000)));
 	/*
 	 * Schedule no feedback timer to expire in
 	 * max(t_RTO, 2 * s/X)  =  max(t_RTO, 2 * t_ipi)
 	 */
-	t_nfb = max(hctx->ccid3hctx_t_rto, 2 * hctx->ccid3hctx_t_ipi);
+	t_nfb = max(hc->tx_t_rto, 2 * hc->tx_t_ipi);
 
 	ccid3_pr_debug("%s(%p), Scheduled no feedback timer to "
 		       "expire in %lu jiffies (%luus)\n",
-		       dccp_role(sk),
-		       sk, usecs_to_jiffies(t_nfb), t_nfb);
+		       dccp_role(sk), sk, usecs_to_jiffies(t_nfb), t_nfb);
 
-	sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
+	sk_reset_timer(sk, &hc->tx_no_feedback_timer,
 			   jiffies + usecs_to_jiffies(t_nfb));
 }
 
@@ -510,11 +488,11 @@
 {
 	int rc = 0;
 	const struct dccp_sock *dp = dccp_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 	struct ccid3_options_received *opt_recv;
 	__be32 opt_val;
 
-	opt_recv = &hctx->ccid3hctx_options_received;
+	opt_recv = &hc->tx_options_received;
 
 	if (opt_recv->ccid3or_seqno != dp->dccps_gsr) {
 		opt_recv->ccid3or_seqno		     = dp->dccps_gsr;
@@ -568,56 +546,55 @@
 
 static int ccid3_hc_tx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid_priv(ccid);
+	struct ccid3_hc_tx_sock *hc = ccid_priv(ccid);
 
-	hctx->ccid3hctx_state = TFRC_SSTATE_NO_SENT;
-	hctx->ccid3hctx_hist = NULL;
-	setup_timer(&hctx->ccid3hctx_no_feedback_timer,
+	hc->tx_state = TFRC_SSTATE_NO_SENT;
+	hc->tx_hist  = NULL;
+	setup_timer(&hc->tx_no_feedback_timer,
 			ccid3_hc_tx_no_feedback_timer, (unsigned long)sk);
-
 	return 0;
 }
 
 static void ccid3_hc_tx_exit(struct sock *sk)
 {
-	struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
+	struct ccid3_hc_tx_sock *hc = ccid3_hc_tx_sk(sk);
 
 	ccid3_hc_tx_set_state(sk, TFRC_SSTATE_TERM);
-	sk_stop_timer(sk, &hctx->ccid3hctx_no_feedback_timer);
+	sk_stop_timer(sk, &hc->tx_no_feedback_timer);
 
-	tfrc_tx_hist_purge(&hctx->ccid3hctx_hist);
+	tfrc_tx_hist_purge(&hc->tx_hist);
 }
 
 static void ccid3_hc_tx_get_info(struct sock *sk, struct tcp_info *info)
 {
-	struct ccid3_hc_tx_sock *hctx;
+	struct ccid3_hc_tx_sock *hc;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return;
 
-	hctx = ccid3_hc_tx_sk(sk);
-	info->tcpi_rto = hctx->ccid3hctx_t_rto;
-	info->tcpi_rtt = hctx->ccid3hctx_rtt;
+	hc = ccid3_hc_tx_sk(sk);
+	info->tcpi_rto = hc->tx_t_rto;
+	info->tcpi_rtt = hc->tx_rtt;
 }
 
 static int ccid3_hc_tx_getsockopt(struct sock *sk, const int optname, int len,
 				  u32 __user *optval, int __user *optlen)
 {
-	const struct ccid3_hc_tx_sock *hctx;
+	const struct ccid3_hc_tx_sock *hc;
 	const void *val;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return -EINVAL;
 
-	hctx = ccid3_hc_tx_sk(sk);
+	hc = ccid3_hc_tx_sk(sk);
 	switch (optname) {
 	case DCCP_SOCKOPT_CCID_TX_INFO:
-		if (len < sizeof(hctx->ccid3hctx_tfrc))
+		if (len < sizeof(hc->tx_tfrc))
 			return -EINVAL;
-		len = sizeof(hctx->ccid3hctx_tfrc);
-		val = &hctx->ccid3hctx_tfrc;
+		len = sizeof(hc->tx_tfrc);
+		val = &hc->tx_tfrc;
 		break;
 	default:
 		return -ENOPROTOOPT;
@@ -657,34 +634,34 @@
 static void ccid3_hc_rx_set_state(struct sock *sk,
 				  enum ccid3_hc_rx_states state)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
-	enum ccid3_hc_rx_states oldstate = hcrx->ccid3hcrx_state;
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
+	enum ccid3_hc_rx_states oldstate = hc->rx_state;
 
 	ccid3_pr_debug("%s(%p) %-8.8s -> %s\n",
 		       dccp_role(sk), sk, ccid3_rx_state_name(oldstate),
 		       ccid3_rx_state_name(state));
 	WARN_ON(state == oldstate);
-	hcrx->ccid3hcrx_state = state;
+	hc->rx_state = state;
 }
 
 static void ccid3_hc_rx_send_feedback(struct sock *sk,
 				      const struct sk_buff *skb,
 				      enum ccid3_fback_type fbtype)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	struct dccp_sock *dp = dccp_sk(sk);
 	ktime_t now;
 	s64 delta = 0;
 
-	if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_TERM))
+	if (unlikely(hc->rx_state == TFRC_RSTATE_TERM))
 		return;
 
 	now = ktime_get_real();
 
 	switch (fbtype) {
 	case CCID3_FBACK_INITIAL:
-		hcrx->ccid3hcrx_x_recv = 0;
-		hcrx->ccid3hcrx_pinv   = ~0U;   /* see RFC 4342, 8.5 */
+		hc->rx_x_recv = 0;
+		hc->rx_pinv   = ~0U;   /* see RFC 4342, 8.5 */
 		break;
 	case CCID3_FBACK_PARAM_CHANGE:
 		/*
@@ -697,27 +674,26 @@
 		 * the number of bytes since last feedback.
 		 * This is a safe fallback, since X is bounded above by X_calc.
 		 */
-		if (hcrx->ccid3hcrx_x_recv > 0)
+		if (hc->rx_x_recv > 0)
 			break;
 		/* fall through */
 	case CCID3_FBACK_PERIODIC:
-		delta = ktime_us_delta(now, hcrx->ccid3hcrx_tstamp_last_feedback);
+		delta = ktime_us_delta(now, hc->rx_tstamp_last_feedback);
 		if (delta <= 0)
 			DCCP_BUG("delta (%ld) <= 0", (long)delta);
 		else
-			hcrx->ccid3hcrx_x_recv =
-				scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
+			hc->rx_x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 		break;
 	default:
 		return;
 	}
 
 	ccid3_pr_debug("Interval %ldusec, X_recv=%u, 1/p=%u\n", (long)delta,
-		       hcrx->ccid3hcrx_x_recv, hcrx->ccid3hcrx_pinv);
+		       hc->rx_x_recv, hc->rx_pinv);
 
-	hcrx->ccid3hcrx_tstamp_last_feedback = now;
-	hcrx->ccid3hcrx_last_counter	     = dccp_hdr(skb)->dccph_ccval;
-	hcrx->ccid3hcrx_bytes_recv	     = 0;
+	hc->rx_tstamp_last_feedback = now;
+	hc->rx_last_counter	    = dccp_hdr(skb)->dccph_ccval;
+	hc->rx_bytes_recv	    = 0;
 
 	dp->dccps_hc_rx_insert_options = 1;
 	dccp_send_ack(sk);
@@ -725,19 +701,19 @@
 
 static int ccid3_hc_rx_insert_options(struct sock *sk, struct sk_buff *skb)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 	__be32 x_recv, pinv;
 
 	if (!(sk->sk_state == DCCP_OPEN || sk->sk_state == DCCP_PARTOPEN))
 		return 0;
 
-	hcrx = ccid3_hc_rx_sk(sk);
+	hc = ccid3_hc_rx_sk(sk);
 
 	if (dccp_packet_without_ack(skb))
 		return 0;
 
-	x_recv = htonl(hcrx->ccid3hcrx_x_recv);
-	pinv   = htonl(hcrx->ccid3hcrx_pinv);
+	x_recv = htonl(hc->rx_x_recv);
+	pinv   = htonl(hc->rx_pinv);
 
 	if (dccp_insert_option(sk, skb, TFRC_OPT_LOSS_EVENT_RATE,
 			       &pinv, sizeof(pinv)) ||
@@ -760,26 +736,26 @@
  */
 static u32 ccid3_first_li(struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	u32 x_recv, p, delta;
 	u64 fval;
 
-	if (hcrx->ccid3hcrx_rtt == 0) {
+	if (hc->rx_rtt == 0) {
 		DCCP_WARN("No RTT estimate available, using fallback RTT\n");
-		hcrx->ccid3hcrx_rtt = DCCP_FALLBACK_RTT;
+		hc->rx_rtt = DCCP_FALLBACK_RTT;
 	}
 
-	delta = ktime_to_us(net_timedelta(hcrx->ccid3hcrx_tstamp_last_feedback));
-	x_recv = scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
+	delta  = ktime_to_us(net_timedelta(hc->rx_tstamp_last_feedback));
+	x_recv = scaled_div32(hc->rx_bytes_recv, delta);
 	if (x_recv == 0) {		/* would also trigger divide-by-zero */
 		DCCP_WARN("X_recv==0\n");
-		if ((x_recv = hcrx->ccid3hcrx_x_recv) == 0) {
+		if ((x_recv = hc->rx_x_recv) == 0) {
 			DCCP_BUG("stored value of X_recv is zero");
 			return ~0U;
 		}
 	}
 
-	fval = scaled_div(hcrx->ccid3hcrx_s, hcrx->ccid3hcrx_rtt);
+	fval = scaled_div(hc->rx_s, hc->rx_rtt);
 	fval = scaled_div32(fval, x_recv);
 	p = tfrc_calc_x_reverse_lookup(fval);
 
@@ -791,19 +767,19 @@
 
 static void ccid3_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 	enum ccid3_fback_type do_feedback = CCID3_FBACK_NONE;
 	const u64 ndp = dccp_sk(sk)->dccps_options_received.dccpor_ndp;
 	const bool is_data_packet = dccp_data_packet(skb);
 
-	if (unlikely(hcrx->ccid3hcrx_state == TFRC_RSTATE_NO_DATA)) {
+	if (unlikely(hc->rx_state == TFRC_RSTATE_NO_DATA)) {
 		if (is_data_packet) {
 			const u32 payload = skb->len - dccp_hdr(skb)->dccph_doff * 4;
 			do_feedback = CCID3_FBACK_INITIAL;
 			ccid3_hc_rx_set_state(sk, TFRC_RSTATE_DATA);
-			hcrx->ccid3hcrx_s = payload;
+			hc->rx_s = payload;
 			/*
-			 * Not necessary to update ccid3hcrx_bytes_recv here,
+			 * Not necessary to update rx_bytes_recv here,
 			 * since X_recv = 0 for the first feedback packet (cf.
 			 * RFC 3448, 6.3) -- gerrit
 			 */
@@ -811,7 +787,7 @@
 		goto update_records;
 	}
 
-	if (tfrc_rx_hist_duplicate(&hcrx->ccid3hcrx_hist, skb))
+	if (tfrc_rx_hist_duplicate(&hc->rx_hist, skb))
 		return; /* done receiving */
 
 	if (is_data_packet) {
@@ -819,20 +795,20 @@
 		/*
 		 * Update moving-average of s and the sum of received payload bytes
 		 */
-		hcrx->ccid3hcrx_s = tfrc_ewma(hcrx->ccid3hcrx_s, payload, 9);
-		hcrx->ccid3hcrx_bytes_recv += payload;
+		hc->rx_s = tfrc_ewma(hc->rx_s, payload, 9);
+		hc->rx_bytes_recv += payload;
 	}
 
 	/*
 	 * Perform loss detection and handle pending losses
 	 */
-	if (tfrc_rx_handle_loss(&hcrx->ccid3hcrx_hist, &hcrx->ccid3hcrx_li_hist,
+	if (tfrc_rx_handle_loss(&hc->rx_hist, &hc->rx_li_hist,
 				skb, ndp, ccid3_first_li, sk)) {
 		do_feedback = CCID3_FBACK_PARAM_CHANGE;
 		goto done_receiving;
 	}
 
-	if (tfrc_rx_hist_loss_pending(&hcrx->ccid3hcrx_hist))
+	if (tfrc_rx_hist_loss_pending(&hc->rx_hist))
 		return; /* done receiving */
 
 	/*
@@ -841,17 +817,17 @@
 	if (unlikely(!is_data_packet))
 		goto update_records;
 
-	if (!tfrc_lh_is_initialised(&hcrx->ccid3hcrx_li_hist)) {
-		const u32 sample = tfrc_rx_hist_sample_rtt(&hcrx->ccid3hcrx_hist, skb);
+	if (!tfrc_lh_is_initialised(&hc->rx_li_hist)) {
+		const u32 sample = tfrc_rx_hist_sample_rtt(&hc->rx_hist, skb);
 		/*
 		 * Empty loss history: no loss so far, hence p stays 0.
 		 * Sample RTT values, since an RTT estimate is required for the
 		 * computation of p when the first loss occurs; RFC 3448, 6.3.1.
 		 */
 		if (sample != 0)
-			hcrx->ccid3hcrx_rtt = tfrc_ewma(hcrx->ccid3hcrx_rtt, sample, 9);
+			hc->rx_rtt = tfrc_ewma(hc->rx_rtt, sample, 9);
 
-	} else if (tfrc_lh_update_i_mean(&hcrx->ccid3hcrx_li_hist, skb)) {
+	} else if (tfrc_lh_update_i_mean(&hc->rx_li_hist, skb)) {
 		/*
 		 * Step (3) of [RFC 3448, 6.1]: Recompute I_mean and, if I_mean
 		 * has decreased (resp. p has increased), send feedback now.
@@ -862,11 +838,11 @@
 	/*
 	 * Check if the periodic once-per-RTT feedback is due; RFC 4342, 10.3
 	 */
-	if (SUB16(dccp_hdr(skb)->dccph_ccval, hcrx->ccid3hcrx_last_counter) > 3)
+	if (SUB16(dccp_hdr(skb)->dccph_ccval, hc->rx_last_counter) > 3)
 		do_feedback = CCID3_FBACK_PERIODIC;
 
 update_records:
-	tfrc_rx_hist_add_packet(&hcrx->ccid3hcrx_hist, skb, ndp);
+	tfrc_rx_hist_add_packet(&hc->rx_hist, skb, ndp);
 
 done_receiving:
 	if (do_feedback)
@@ -875,41 +851,41 @@
 
 static int ccid3_hc_rx_init(struct ccid *ccid, struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid_priv(ccid);
+	struct ccid3_hc_rx_sock *hc = ccid_priv(ccid);
 
-	hcrx->ccid3hcrx_state = TFRC_RSTATE_NO_DATA;
-	tfrc_lh_init(&hcrx->ccid3hcrx_li_hist);
-	return tfrc_rx_hist_alloc(&hcrx->ccid3hcrx_hist);
+	hc->rx_state = TFRC_RSTATE_NO_DATA;
+	tfrc_lh_init(&hc->rx_li_hist);
+	return tfrc_rx_hist_alloc(&hc->rx_hist);
 }
 
 static void ccid3_hc_rx_exit(struct sock *sk)
 {
-	struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
+	struct ccid3_hc_rx_sock *hc = ccid3_hc_rx_sk(sk);
 
 	ccid3_hc_rx_set_state(sk, TFRC_RSTATE_TERM);
 
-	tfrc_rx_hist_purge(&hcrx->ccid3hcrx_hist);
-	tfrc_lh_cleanup(&hcrx->ccid3hcrx_li_hist);
+	tfrc_rx_hist_purge(&hc->rx_hist);
+	tfrc_lh_cleanup(&hc->rx_li_hist);
 }
 
 static void ccid3_hc_rx_get_info(struct sock *sk, struct tcp_info *info)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 
 	/* Listen socks doesn't have a private CCID block */
 	if (sk->sk_state == DCCP_LISTEN)
 		return;
 
-	hcrx = ccid3_hc_rx_sk(sk);
-	info->tcpi_ca_state = hcrx->ccid3hcrx_state;
+	hc = ccid3_hc_rx_sk(sk);
+	info->tcpi_ca_state = hc->rx_state;
 	info->tcpi_options  |= TCPI_OPT_TIMESTAMPS;
-	info->tcpi_rcv_rtt  = hcrx->ccid3hcrx_rtt;
+	info->tcpi_rcv_rtt  = hc->rx_rtt;
 }
 
 static int ccid3_hc_rx_getsockopt(struct sock *sk, const int optname, int len,
 				  u32 __user *optval, int __user *optlen)
 {
-	const struct ccid3_hc_rx_sock *hcrx;
+	const struct ccid3_hc_rx_sock *hc;
 	struct tfrc_rx_info rx_info;
 	const void *val;
 
@@ -917,15 +893,15 @@
 	if (sk->sk_state == DCCP_LISTEN)
 		return -EINVAL;
 
-	hcrx = ccid3_hc_rx_sk(sk);
+	hc = ccid3_hc_rx_sk(sk);
 	switch (optname) {
 	case DCCP_SOCKOPT_CCID_RX_INFO:
 		if (len < sizeof(rx_info))
 			return -EINVAL;
-		rx_info.tfrcrx_x_recv = hcrx->ccid3hcrx_x_recv;
-		rx_info.tfrcrx_rtt    = hcrx->ccid3hcrx_rtt;
-		rx_info.tfrcrx_p      = hcrx->ccid3hcrx_pinv == 0 ? ~0U :
-					   scaled_div(1, hcrx->ccid3hcrx_pinv);
+		rx_info.tfrcrx_x_recv = hc->rx_x_recv;
+		rx_info.tfrcrx_rtt    = hc->rx_rtt;
+		rx_info.tfrcrx_p      = hc->rx_pinv == 0 ? ~0U :
+					   scaled_div(1, hc->rx_pinv);
 		len = sizeof(rx_info);
 		val = &rx_info;
 		break;
diff --git a/net/dccp/ccids/ccid3.h b/net/dccp/ccids/ccid3.h
index e5a2441..0326357 100644
--- a/net/dccp/ccids/ccid3.h
+++ b/net/dccp/ccids/ccid3.h
@@ -75,44 +75,44 @@
 
 /**
  * struct ccid3_hc_tx_sock - CCID3 sender half-connection socket
- * @ccid3hctx_x - Current sending rate in 64 * bytes per second
- * @ccid3hctx_x_recv - Receive rate    in 64 * bytes per second
- * @ccid3hctx_x_calc - Calculated rate in bytes per second
- * @ccid3hctx_rtt - Estimate of current round trip time in usecs
- * @ccid3hctx_p - Current loss event rate (0-1) scaled by 1000000
- * @ccid3hctx_s - Packet size in bytes
- * @ccid3hctx_t_rto - Nofeedback Timer setting in usecs
- * @ccid3hctx_t_ipi - Interpacket (send) interval (RFC 3448, 4.6) in usecs
- * @ccid3hctx_state - Sender state, one of %ccid3_hc_tx_states
- * @ccid3hctx_last_win_count - Last window counter sent
- * @ccid3hctx_t_last_win_count - Timestamp of earliest packet
- *				 with last_win_count value sent
- * @ccid3hctx_no_feedback_timer - Handle to no feedback timer
- * @ccid3hctx_t_ld - Time last doubled during slow start
- * @ccid3hctx_t_nom - Nominal send time of next packet
- * @ccid3hctx_delta - Send timer delta (RFC 3448, 4.6) in usecs
- * @ccid3hctx_hist - Packet history
- * @ccid3hctx_options_received - Parsed set of retrieved options
+ * @tx_x:		  Current sending rate in 64 * bytes per second
+ * @tx_x_recv:		  Receive rate in 64 * bytes per second
+ * @tx_x_calc:		  Calculated rate in bytes per second
+ * @tx_rtt:		  Estimate of current round trip time in usecs
+ * @tx_p:		  Current loss event rate (0-1) scaled by 1000000
+ * @tx_s:		  Packet size in bytes
+ * @tx_t_rto:		  Nofeedback Timer setting in usecs
+ * @tx_t_ipi:		  Interpacket (send) interval (RFC 3448, 4.6) in usecs
+ * @tx_state:		  Sender state, one of %ccid3_hc_tx_states
+ * @tx_last_win_count:	  Last window counter sent
+ * @tx_t_last_win_count:  Timestamp of earliest packet
+ *			  with last_win_count value sent
+ * @tx_no_feedback_timer: Handle to no feedback timer
+ * @tx_t_ld:		  Time last doubled during slow start
+ * @tx_t_nom:		  Nominal send time of next packet
+ * @tx_delta:		  Send timer delta (RFC 3448, 4.6) in usecs
+ * @tx_hist:		  Packet history
+ * @tx_options_received:  Parsed set of retrieved options
  */
 struct ccid3_hc_tx_sock {
-	struct tfrc_tx_info		ccid3hctx_tfrc;
-#define ccid3hctx_x			ccid3hctx_tfrc.tfrctx_x
-#define ccid3hctx_x_recv		ccid3hctx_tfrc.tfrctx_x_recv
-#define ccid3hctx_x_calc		ccid3hctx_tfrc.tfrctx_x_calc
-#define ccid3hctx_rtt			ccid3hctx_tfrc.tfrctx_rtt
-#define ccid3hctx_p			ccid3hctx_tfrc.tfrctx_p
-#define ccid3hctx_t_rto			ccid3hctx_tfrc.tfrctx_rto
-#define ccid3hctx_t_ipi			ccid3hctx_tfrc.tfrctx_ipi
-	u16				ccid3hctx_s;
-	enum ccid3_hc_tx_states		ccid3hctx_state:8;
-	u8				ccid3hctx_last_win_count;
-	ktime_t				ccid3hctx_t_last_win_count;
-	struct timer_list		ccid3hctx_no_feedback_timer;
-	ktime_t				ccid3hctx_t_ld;
-	ktime_t				ccid3hctx_t_nom;
-	u32				ccid3hctx_delta;
-	struct tfrc_tx_hist_entry	*ccid3hctx_hist;
-	struct ccid3_options_received	ccid3hctx_options_received;
+	struct tfrc_tx_info		tx_tfrc;
+#define tx_x				tx_tfrc.tfrctx_x
+#define tx_x_recv			tx_tfrc.tfrctx_x_recv
+#define tx_x_calc			tx_tfrc.tfrctx_x_calc
+#define tx_rtt				tx_tfrc.tfrctx_rtt
+#define tx_p				tx_tfrc.tfrctx_p
+#define tx_t_rto			tx_tfrc.tfrctx_rto
+#define tx_t_ipi			tx_tfrc.tfrctx_ipi
+	u16				tx_s;
+	enum ccid3_hc_tx_states		tx_state:8;
+	u8				tx_last_win_count;
+	ktime_t				tx_t_last_win_count;
+	struct timer_list		tx_no_feedback_timer;
+	ktime_t				tx_t_ld;
+	ktime_t				tx_t_nom;
+	u32				tx_delta;
+	struct tfrc_tx_hist_entry	*tx_hist;
+	struct ccid3_options_received	tx_options_received;
 };
 
 static inline struct ccid3_hc_tx_sock *ccid3_hc_tx_sk(const struct sock *sk)
@@ -131,32 +131,32 @@
 
 /**
  * struct ccid3_hc_rx_sock - CCID3 receiver half-connection socket
- * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448 4.3)
- * @ccid3hcrx_rtt  -  Receiver estimate of rtt (non-standard)
- * @ccid3hcrx_p  -  Current loss event rate (RFC 3448 5.4)
- * @ccid3hcrx_last_counter  -  Tracks window counter (RFC 4342, 8.1)
- * @ccid3hcrx_state  -  Receiver state, one of %ccid3_hc_rx_states
- * @ccid3hcrx_bytes_recv  -  Total sum of DCCP payload bytes
- * @ccid3hcrx_x_recv  -  Receiver estimate of send rate (RFC 3448, sec. 4.3)
- * @ccid3hcrx_rtt  -  Receiver estimate of RTT
- * @ccid3hcrx_tstamp_last_feedback  -  Time at which last feedback was sent
- * @ccid3hcrx_tstamp_last_ack  -  Time at which last feedback was sent
- * @ccid3hcrx_hist  -  Packet history (loss detection + RTT sampling)
- * @ccid3hcrx_li_hist  -  Loss Interval database
- * @ccid3hcrx_s  -  Received packet size in bytes
- * @ccid3hcrx_pinv  -  Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
+ * @rx_x_recv:		     Receiver estimate of send rate (RFC 3448 4.3)
+ * @rx_rtt:		     Receiver estimate of rtt (non-standard)
+ * @rx_p:		     Current loss event rate (RFC 3448 5.4)
+ * @rx_last_counter:	     Tracks window counter (RFC 4342, 8.1)
+ * @rx_state:		     Receiver state, one of %ccid3_hc_rx_states
+ * @rx_bytes_recv:	     Total sum of DCCP payload bytes
+ * @rx_x_recv:		     Receiver estimate of send rate (RFC 3448, sec. 4.3)
+ * @rx_rtt:		     Receiver estimate of RTT
+ * @rx_tstamp_last_feedback: Time at which last feedback was sent
+ * @rx_tstamp_last_ack:	     Time at which last feedback was sent
+ * @rx_hist:		     Packet history (loss detection + RTT sampling)
+ * @rx_li_hist:		     Loss Interval database
+ * @rx_s:		     Received packet size in bytes
+ * @rx_pinv:		     Inverse of Loss Event Rate (RFC 4342, sec. 8.5)
  */
 struct ccid3_hc_rx_sock {
-	u8				ccid3hcrx_last_counter:4;
-	enum ccid3_hc_rx_states		ccid3hcrx_state:8;
-	u32				ccid3hcrx_bytes_recv;
-	u32				ccid3hcrx_x_recv;
-	u32				ccid3hcrx_rtt;
-	ktime_t				ccid3hcrx_tstamp_last_feedback;
-	struct tfrc_rx_hist		ccid3hcrx_hist;
-	struct tfrc_loss_hist		ccid3hcrx_li_hist;
-	u16				ccid3hcrx_s;
-#define ccid3hcrx_pinv			ccid3hcrx_li_hist.i_mean
+	u8				rx_last_counter:4;
+	enum ccid3_hc_rx_states		rx_state:8;
+	u32				rx_bytes_recv;
+	u32				rx_x_recv;
+	u32				rx_rtt;
+	ktime_t				rx_tstamp_last_feedback;
+	struct tfrc_rx_hist		rx_hist;
+	struct tfrc_loss_hist		rx_li_hist;
+	u16				rx_s;
+#define rx_pinv				rx_li_hist.i_mean
 };
 
 static inline struct ccid3_hc_rx_sock *ccid3_hc_rx_sk(const struct sock *sk)
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index 7302e14..2423a08 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -62,10 +62,10 @@
 		nexthop = inet->opt->faddr;
 	}
 
-	tmp = ip_route_connect(&rt, nexthop, inet->saddr,
+	tmp = ip_route_connect(&rt, nexthop, inet->inet_saddr,
 			       RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			       IPPROTO_DCCP,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (tmp < 0)
 		return tmp;
 
@@ -77,12 +77,12 @@
 	if (inet->opt == NULL || !inet->opt->srr)
 		daddr = rt->rt_dst;
 
-	if (inet->saddr == 0)
-		inet->saddr = rt->rt_src;
-	inet->rcv_saddr = inet->saddr;
+	if (inet->inet_saddr == 0)
+		inet->inet_saddr = rt->rt_src;
+	inet->inet_rcv_saddr = inet->inet_saddr;
 
-	inet->dport = usin->sin_port;
-	inet->daddr = daddr;
+	inet->inet_dport = usin->sin_port;
+	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
 	if (inet->opt != NULL)
@@ -98,17 +98,19 @@
 	if (err != 0)
 		goto failure;
 
-	err = ip_route_newports(&rt, IPPROTO_DCCP, inet->sport, inet->dport,
-				sk);
+	err = ip_route_newports(&rt, IPPROTO_DCCP, inet->inet_sport,
+				inet->inet_dport, sk);
 	if (err != 0)
 		goto failure;
 
 	/* OK, now commit destination to socket.  */
 	sk_setup_caps(sk, &rt->u.dst);
 
-	dp->dccps_iss = secure_dccp_sequence_number(inet->saddr, inet->daddr,
-						    inet->sport, inet->dport);
-	inet->id = dp->dccps_iss ^ jiffies;
+	dp->dccps_iss = secure_dccp_sequence_number(inet->inet_saddr,
+						    inet->inet_daddr,
+						    inet->inet_sport,
+						    inet->inet_dport);
+	inet->inet_id = dp->dccps_iss ^ jiffies;
 
 	err = dccp_connect(sk);
 	rt = NULL;
@@ -123,7 +125,7 @@
 	dccp_set_state(sk, DCCP_CLOSED);
 	ip_rt_put(rt);
 	sk->sk_route_caps = 0;
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	goto out;
 }
 
@@ -352,7 +354,9 @@
 	struct dccp_hdr *dh = dccp_hdr(skb);
 
 	dccp_csum_outgoing(skb);
-	dh->dccph_checksum = dccp_v4_csum_finish(skb, inet->saddr, inet->daddr);
+	dh->dccph_checksum = dccp_v4_csum_finish(skb,
+						 inet->inet_saddr,
+						 inet->inet_daddr);
 }
 
 EXPORT_SYMBOL_GPL(dccp_v4_send_check);
@@ -393,14 +397,14 @@
 
 	newinet		   = inet_sk(newsk);
 	ireq		   = inet_rsk(req);
-	newinet->daddr	   = ireq->rmt_addr;
-	newinet->rcv_saddr = ireq->loc_addr;
-	newinet->saddr	   = ireq->loc_addr;
+	newinet->inet_daddr	= ireq->rmt_addr;
+	newinet->inet_rcv_saddr = ireq->loc_addr;
+	newinet->inet_saddr	= ireq->loc_addr;
 	newinet->opt	   = ireq->opt;
 	ireq->opt	   = NULL;
 	newinet->mc_index  = inet_iif(skb);
 	newinet->mc_ttl	   = ip_hdr(skb)->ttl;
-	newinet->id	   = jiffies;
+	newinet->inet_id   = jiffies;
 
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
@@ -987,7 +991,6 @@
 	.protocol	= IPPROTO_DCCP,
 	.prot		= &dccp_v4_prot,
 	.ops		= &inet_dccp_ops,
-	.capability	= -1,
 	.no_check	= 0,
 	.flags		= INET_PROTOSW_ICSK,
 };
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index e48ca5d..50ea91a 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -158,8 +158,8 @@
 			ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 			ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 			fl.oif = sk->sk_bound_dev_if;
-			fl.fl_ip_dport = inet->dport;
-			fl.fl_ip_sport = inet->sport;
+			fl.fl_ip_dport = inet->inet_dport;
+			fl.fl_ip_sport = inet->inet_sport;
 			security_sk_classify_flow(sk, &fl);
 
 			err = ip6_dst_lookup(sk, &dst, &fl);
@@ -510,11 +510,9 @@
 
 		memcpy(newnp, np, sizeof(struct ipv6_pinfo));
 
-		ipv6_addr_set(&newnp->daddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->daddr);
+		ipv6_addr_set_v4mapped(newinet->inet_daddr, &newnp->daddr);
 
-		ipv6_addr_set(&newnp->saddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->saddr);
+		ipv6_addr_set_v4mapped(newinet->inet_saddr, &newnp->saddr);
 
 		ipv6_addr_copy(&newnp->rcv_saddr, &newnp->saddr);
 
@@ -642,7 +640,8 @@
 
 	dccp_sync_mss(newsk, dst_mtu(dst));
 
-	newinet->daddr = newinet->saddr = newinet->rcv_saddr = LOOPBACK4_IPV6;
+	newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
+	newinet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	__inet6_hash(newsk);
 	__inet_inherit_port(sk, newsk);
@@ -970,12 +969,9 @@
 			icsk->icsk_af_ops = &dccp_ipv6_af_ops;
 			sk->sk_backlog_rcv = dccp_v6_do_rcv;
 			goto failure;
-		} else {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->saddr);
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->rcv_saddr);
 		}
+		ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
+		ipv6_addr_set_v4mapped(inet->inet_rcv_saddr, &np->rcv_saddr);
 
 		return err;
 	}
@@ -988,7 +984,7 @@
 	ipv6_addr_copy(&fl.fl6_src, saddr ? saddr : &np->saddr);
 	fl.oif = sk->sk_bound_dev_if;
 	fl.fl_ip_dport = usin->sin6_port;
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 	security_sk_classify_flow(sk, &fl);
 
 	if (np->opt != NULL && np->opt->srcrt != NULL) {
@@ -1021,7 +1017,7 @@
 
 	/* set the source address */
 	ipv6_addr_copy(&np->saddr, saddr);
-	inet->rcv_saddr = LOOPBACK4_IPV6;
+	inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	__ip6_dst_store(sk, dst, NULL, NULL);
 
@@ -1030,7 +1026,7 @@
 		icsk->icsk_ext_hdr_len = (np->opt->opt_flen +
 					  np->opt->opt_nflen);
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	dccp_set_state(sk, DCCP_REQUESTING);
 	err = inet6_hash_connect(&dccp_death_row, sk);
@@ -1039,7 +1035,8 @@
 
 	dp->dccps_iss = secure_dccpv6_sequence_number(np->saddr.s6_addr32,
 						      np->daddr.s6_addr32,
-						      inet->sport, inet->dport);
+						      inet->inet_sport,
+						      inet->inet_dport);
 	err = dccp_connect(sk);
 	if (err)
 		goto late_failure;
@@ -1050,7 +1047,7 @@
 	dccp_set_state(sk, DCCP_CLOSED);
 	__sk_dst_reset(sk);
 failure:
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	sk->sk_route_caps = 0;
 	return err;
 }
@@ -1188,7 +1185,6 @@
 	.protocol	= IPPROTO_DCCP,
 	.prot		= &dccp_v6_prot,
 	.ops		= &inet6_dccp_ops,
-	.capability	= -1,
 	.flags		= INET_PROTOSW_ICSK,
 };
 
diff --git a/net/dccp/output.c b/net/dccp/output.c
index c96119f..d6bb753 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -99,8 +99,8 @@
 		/* Build DCCP header and checksum it. */
 		dh = dccp_zeroed_hdr(skb, dccp_header_size);
 		dh->dccph_type	= dcb->dccpd_type;
-		dh->dccph_sport	= inet->sport;
-		dh->dccph_dport	= inet->dport;
+		dh->dccph_sport	= inet->inet_sport;
+		dh->dccph_dport	= inet->inet_dport;
 		dh->dccph_doff	= (dccp_header_size + dcb->dccpd_opt_len) / 4;
 		dh->dccph_ccval	= dcb->dccpd_ccval;
 		dh->dccph_cscov = dp->dccps_pcslen;
diff --git a/net/dccp/probe.c b/net/dccp/probe.c
index 37731da..dc32842 100644
--- a/net/dccp/probe.c
+++ b/net/dccp/probe.c
@@ -75,26 +75,25 @@
 			 struct msghdr *msg, size_t size)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	struct ccid3_hc_tx_sock *hctx = NULL;
+	struct ccid3_hc_tx_sock *hc = NULL;
 
 	if (ccid_get_current_tx_ccid(dccp_sk(sk)) == DCCPC_CCID3)
-		hctx = ccid3_hc_tx_sk(sk);
+		hc = ccid3_hc_tx_sk(sk);
 
-	if (port == 0 || ntohs(inet->dport) == port ||
-	    ntohs(inet->sport) == port) {
-		if (hctx)
-			printl("%pI4:%u %pI4:%u %d %d %d %d %u "
-			       "%llu %llu %d\n",
-			       &inet->saddr, ntohs(inet->sport),
-			       &inet->daddr, ntohs(inet->dport), size,
-			       hctx->ccid3hctx_s, hctx->ccid3hctx_rtt,
-			       hctx->ccid3hctx_p, hctx->ccid3hctx_x_calc,
-			       hctx->ccid3hctx_x_recv >> 6,
-			       hctx->ccid3hctx_x >> 6, hctx->ccid3hctx_t_ipi);
+	if (port == 0 || ntohs(inet->inet_dport) == port ||
+	    ntohs(inet->inet_sport) == port) {
+		if (hc)
+			printl("%pI4:%u %pI4:%u %d %d %d %d %u %llu %llu %d\n",
+			       &inet->inet_saddr, ntohs(inet->inet_sport),
+			       &inet->inet_daddr, ntohs(inet->inet_dport), size,
+			       hc->tx_s, hc->tx_rtt, hc->tx_p,
+			       hc->tx_x_calc, hc->tx_x_recv >> 6,
+			       hc->tx_x >> 6, hc->tx_t_ipi);
 		else
 			printl("%pI4:%u %pI4:%u %d\n",
-			       &inet->saddr, ntohs(inet->sport),
-			       &inet->daddr, ntohs(inet->dport), size);
+			       &inet->inet_saddr, ntohs(inet->inet_sport),
+			       &inet->inet_daddr, ntohs(inet->inet_dport),
+			       size);
 	}
 
 	jprobe_return();
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index a156319..671cd14 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -278,7 +278,7 @@
 		sk->sk_send_head = NULL;
 	}
 
-	inet->dport = 0;
+	inet->inet_dport = 0;
 
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
@@ -290,7 +290,7 @@
 	inet_csk_delack_init(sk);
 	__sk_dst_reset(sk);
 
-	WARN_ON(inet->num && !icsk->icsk_bind_hash);
+	WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -1060,11 +1060,12 @@
 	for (ehash_order = 0; (1UL << ehash_order) < goal; ehash_order++)
 		;
 	do {
-		dccp_hashinfo.ehash_size = (1UL << ehash_order) * PAGE_SIZE /
+		unsigned long hash_size = (1UL << ehash_order) * PAGE_SIZE /
 					sizeof(struct inet_ehash_bucket);
-		while (dccp_hashinfo.ehash_size &
-		       (dccp_hashinfo.ehash_size - 1))
-			dccp_hashinfo.ehash_size--;
+
+		while (hash_size & (hash_size - 1))
+			hash_size--;
+		dccp_hashinfo.ehash_mask = hash_size - 1;
 		dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
 			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
 	} while (!dccp_hashinfo.ehash && --ehash_order > 0);
@@ -1074,7 +1075,7 @@
 		goto out_free_bind_bucket_cachep;
 	}
 
-	for (i = 0; i < dccp_hashinfo.ehash_size; i++) {
+	for (i = 0; i <= dccp_hashinfo.ehash_mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&dccp_hashinfo.ehash[i].chain, i);
 		INIT_HLIST_NULLS_HEAD(&dccp_hashinfo.ehash[i].twchain, i);
 	}
@@ -1153,7 +1154,7 @@
 		   get_order(dccp_hashinfo.bhash_size *
 			     sizeof(struct inet_bind_hashbucket)));
 	free_pages((unsigned long)dccp_hashinfo.ehash,
-		   get_order(dccp_hashinfo.ehash_size *
+		   get_order((dccp_hashinfo.ehash_mask + 1) *
 			     sizeof(struct inet_ehash_bucket)));
 	inet_ehash_locks_free(&dccp_hashinfo);
 	kmem_cache_destroy(dccp_hashinfo.bind_bucket_cachep);
diff --git a/net/dccp/timer.c b/net/dccp/timer.c
index 162d1e6..bbfeb5e 100644
--- a/net/dccp/timer.c
+++ b/net/dccp/timer.c
@@ -38,7 +38,7 @@
 
 	if (sk->sk_state == DCCP_REQUESTING || sk->sk_state == DCCP_PARTOPEN) {
 		if (icsk->icsk_retransmits != 0)
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		retry_until = icsk->icsk_syn_retries ?
 			    : sysctl_dccp_request_retries;
 	} else {
@@ -63,7 +63,7 @@
 			   Golden words :-).
 		   */
 
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		}
 
 		retry_until = sysctl_dccp_retries2;
diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c
index 7a58c87..9ade3a6 100644
--- a/net/decnet/af_decnet.c
+++ b/net/decnet/af_decnet.c
@@ -675,7 +675,8 @@
 
 
 
-static int dn_create(struct net *net, struct socket *sock, int protocol)
+static int dn_create(struct net *net, struct socket *sock, int protocol,
+		     int kern)
 {
 	struct sock *sk;
 
@@ -749,9 +750,9 @@
 
 	if (!(saddr->sdn_flags & SDF_WILD)) {
 		if (le16_to_cpu(saddr->sdn_nodeaddrl)) {
-			read_lock(&dev_base_lock);
+			rcu_read_lock();
 			ldev = NULL;
-			for_each_netdev(&init_net, dev) {
+			for_each_netdev_rcu(&init_net, dev) {
 				if (!dev->dn_ptr)
 					continue;
 				if (dn_dev_islocal(dev, dn_saddr2dn(saddr))) {
@@ -759,7 +760,7 @@
 					break;
 				}
 			}
-			read_unlock(&dev_base_lock);
+			rcu_read_unlock();
 			if (ldev == NULL)
 				return -EADDRNOTAVAIL;
 		}
@@ -1955,7 +1956,7 @@
 	}
 
 	if ((flags & MSG_TRYHARD) && sk->sk_dst_cache)
-		dst_negative_advice(&sk->sk_dst_cache);
+		dst_negative_advice(&sk->sk_dst_cache, sk);
 
 	mss = scp->segsize_rem;
 	fctype = scp->services_rem & NSP_FC_MASK;
@@ -2325,7 +2326,7 @@
 };
 #endif
 
-static struct net_proto_family	dn_family_ops = {
+static const struct net_proto_family	dn_family_ops = {
 	.family =	AF_DECnet,
 	.create =	dn_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c
index 6e1f085..d82694d 100644
--- a/net/decnet/dn_dev.c
+++ b/net/decnet/dn_dev.c
@@ -600,15 +600,17 @@
 		dev_put(dev);
 }
 
+/*
+ * Called with RTNL
+ */
 static struct dn_dev *dn_dev_by_index(int ifindex)
 {
 	struct net_device *dev;
 	struct dn_dev *dn_dev = NULL;
-	dev = dev_get_by_index(&init_net, ifindex);
-	if (dev) {
+
+	dev = __dev_get_by_index(&init_net, ifindex);
+	if (dev)
 		dn_dev = dev->dn_ptr;
-		dev_put(dev);
-	}
 
 	return dn_dev;
 }
diff --git a/net/decnet/dn_fib.c b/net/decnet/dn_fib.c
index 27ea2e9..fd641f6 100644
--- a/net/decnet/dn_fib.c
+++ b/net/decnet/dn_fib.c
@@ -607,8 +607,8 @@
 	ASSERT_RTNL();
 
 	/* Scan device list */
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		dn_db = dev->dn_ptr;
 		if (dn_db == NULL)
 			continue;
@@ -619,7 +619,7 @@
 			}
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	if (found_it == 0) {
 		fib_magic(RTM_DELROUTE, RTN_LOCAL, ifa->ifa_local, 16, ifa);
diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c
index 57662ca..860286a 100644
--- a/net/decnet/dn_route.c
+++ b/net/decnet/dn_route.c
@@ -908,8 +908,8 @@
 			dev_put(dev_out);
 			goto out;
 		}
-		read_lock(&dev_base_lock);
-		for_each_netdev(&init_net, dev) {
+		rcu_read_lock();
+		for_each_netdev_rcu(&init_net, dev) {
 			if (!dev->dn_ptr)
 				continue;
 			if (!dn_dev_islocal(dev, oldflp->fld_src))
@@ -922,7 +922,7 @@
 			dev_out = dev;
 			break;
 		}
-		read_unlock(&dev_base_lock);
+		rcu_read_unlock();
 		if (dev_out == NULL)
 			goto out;
 		dev_hold(dev_out);
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 0e0254f..5966798 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -457,15 +457,15 @@
 	iov[0].iov_len = size;
 	for (i = 0; i < msg->msg_iovlen; i++) {
 		void __user *base = msg->msg_iov[i].iov_base;
-		size_t len = msg->msg_iov[i].iov_len;
+		size_t iov_len = msg->msg_iov[i].iov_len;
 		/* Check it now since we switch to KERNEL_DS later. */
-		if (!access_ok(VERIFY_READ, base, len)) {
+		if (!access_ok(VERIFY_READ, base, iov_len)) {
 			mutex_unlock(&econet_mutex);
 			return -EFAULT;
 		}
 		iov[i+1].iov_base = base;
-		iov[i+1].iov_len = len;
-		size += len;
+		iov[i+1].iov_len = iov_len;
+		size += iov_len;
 	}
 
 	/* Get a skbuff (no data, just holds our cb information) */
@@ -605,7 +605,8 @@
  *	Create an Econet socket
  */
 
-static int econet_create(struct net *net, struct socket *sock, int protocol)
+static int econet_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	struct econet_sock *eo;
@@ -742,7 +743,7 @@
 	return 0;
 }
 
-static struct net_proto_family econet_family_ops = {
+static const struct net_proto_family econet_family_ops = {
 	.family =	PF_ECONET,
 	.create =	econet_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/ieee802154/af_ieee802154.c b/net/ieee802154/af_ieee802154.c
index cd949d5..de6e34d 100644
--- a/net/ieee802154/af_ieee802154.c
+++ b/net/ieee802154/af_ieee802154.c
@@ -234,7 +234,7 @@
  * set the state.
  */
 static int ieee802154_create(struct net *net, struct socket *sock,
-		int protocol)
+			     int protocol, int kern)
 {
 	struct sock *sk;
 	int rc;
@@ -285,7 +285,7 @@
 	return rc;
 }
 
-static struct net_proto_family ieee802154_family_ops = {
+static const struct net_proto_family ieee802154_family_ops = {
 	.family		= PF_IEEE802154,
 	.create		= ieee802154_create,
 	.owner		= THIS_MODULE,
diff --git a/net/ieee802154/dgram.c b/net/ieee802154/dgram.c
index a413b1b..9aac5ae 100644
--- a/net/ieee802154/dgram.c
+++ b/net/ieee802154/dgram.c
@@ -303,7 +303,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (flags & MSG_TRUNC)
 		copied = skb->len;
@@ -318,7 +318,6 @@
 static int dgram_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
diff --git a/net/ieee802154/raw.c b/net/ieee802154/raw.c
index 30e74ee..9c9b85c 100644
--- a/net/ieee802154/raw.c
+++ b/net/ieee802154/raw.c
@@ -191,7 +191,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (flags & MSG_TRUNC)
 		copied = skb->len;
@@ -206,7 +206,6 @@
 static int raw_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 57737b8..7d12c6a 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -174,12 +174,12 @@
 	/* We may need to bind the socket. */
 	lock_sock(sk);
 	inet = inet_sk(sk);
-	if (!inet->num) {
+	if (!inet->inet_num) {
 		if (sk->sk_prot->get_port(sk, 0)) {
 			release_sock(sk);
 			return -EAGAIN;
 		}
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 	}
 	release_sock(sk);
 	return 0;
@@ -262,7 +262,8 @@
  *	Create an inet socket.
  */
 
-static int inet_create(struct net *net, struct socket *sock, int protocol)
+static int inet_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct inet_protosw *answer;
@@ -325,7 +326,7 @@
 	}
 
 	err = -EPERM;
-	if (answer->capability > 0 && !capable(answer->capability))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		goto out_rcu_unlock;
 
 	err = -EAFNOSUPPORT;
@@ -354,7 +355,7 @@
 	inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
 
 	if (SOCK_RAW == sock->type) {
-		inet->num = protocol;
+		inet->inet_num = protocol;
 		if (IPPROTO_RAW == protocol)
 			inet->hdrincl = 1;
 	}
@@ -364,7 +365,7 @@
 	else
 		inet->pmtudisc = IP_PMTUDISC_WANT;
 
-	inet->id = 0;
+	inet->inet_id = 0;
 
 	sock_init_data(sock, sk);
 
@@ -381,13 +382,13 @@
 
 	sk_refcnt_debug_inc(sk);
 
-	if (inet->num) {
+	if (inet->inet_num) {
 		/* It assumes that any protocol which allows
 		 * the user to assign a number at socket
 		 * creation time automatically
 		 * shares.
 		 */
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 		/* Add to protocol hash chains. */
 		sk->sk_prot->hash(sk);
 	}
@@ -494,27 +495,27 @@
 
 	/* Check these errors (active socket, double bind). */
 	err = -EINVAL;
-	if (sk->sk_state != TCP_CLOSE || inet->num)
+	if (sk->sk_state != TCP_CLOSE || inet->inet_num)
 		goto out_release_sock;
 
-	inet->rcv_saddr = inet->saddr = addr->sin_addr.s_addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = addr->sin_addr.s_addr;
 	if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST)
-		inet->saddr = 0;  /* Use device */
+		inet->inet_saddr = 0;  /* Use device */
 
 	/* Make sure we are allowed to bind here. */
 	if (sk->sk_prot->get_port(sk, snum)) {
-		inet->saddr = inet->rcv_saddr = 0;
+		inet->inet_saddr = inet->inet_rcv_saddr = 0;
 		err = -EADDRINUSE;
 		goto out_release_sock;
 	}
 
-	if (inet->rcv_saddr)
+	if (inet->inet_rcv_saddr)
 		sk->sk_userlocks |= SOCK_BINDADDR_LOCK;
 	if (snum)
 		sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
-	inet->sport = htons(inet->num);
-	inet->daddr = 0;
-	inet->dport = 0;
+	inet->inet_sport = htons(inet->inet_num);
+	inet->inet_daddr = 0;
+	inet->inet_dport = 0;
 	sk_dst_reset(sk);
 	err = 0;
 out_release_sock:
@@ -532,7 +533,7 @@
 	if (uaddr->sa_family == AF_UNSPEC)
 		return sk->sk_prot->disconnect(sk, flags);
 
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 	return sk->sk_prot->connect(sk, (struct sockaddr *)uaddr, addr_len);
 }
@@ -685,21 +686,21 @@
 {
 	struct sock *sk		= sock->sk;
 	struct inet_sock *inet	= inet_sk(sk);
-	struct sockaddr_in *sin	= (struct sockaddr_in *)uaddr;
+	DECLARE_SOCKADDR(struct sockaddr_in *, sin, uaddr);
 
 	sin->sin_family = AF_INET;
 	if (peer) {
-		if (!inet->dport ||
+		if (!inet->inet_dport ||
 		    (((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_SYN_SENT)) &&
 		     peer == 1))
 			return -ENOTCONN;
-		sin->sin_port = inet->dport;
-		sin->sin_addr.s_addr = inet->daddr;
+		sin->sin_port = inet->inet_dport;
+		sin->sin_addr.s_addr = inet->inet_daddr;
 	} else {
-		__be32 addr = inet->rcv_saddr;
+		__be32 addr = inet->inet_rcv_saddr;
 		if (!addr)
-			addr = inet->saddr;
-		sin->sin_port = inet->sport;
+			addr = inet->inet_saddr;
+		sin->sin_port = inet->inet_sport;
 		sin->sin_addr.s_addr = addr;
 	}
 	memset(sin->sin_zero, 0, sizeof(sin->sin_zero));
@@ -714,7 +715,7 @@
 	struct sock *sk = sock->sk;
 
 	/* We may need to bind the socket. */
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 
 	return sk->sk_prot->sendmsg(iocb, sk, msg, size);
@@ -728,7 +729,7 @@
 	struct sock *sk = sock->sk;
 
 	/* We may need to bind the socket. */
-	if (!inet_sk(sk)->num && inet_autobind(sk))
+	if (!inet_sk(sk)->inet_num && inet_autobind(sk))
 		return -EAGAIN;
 
 	if (sk->sk_prot->sendpage)
@@ -931,7 +932,7 @@
 #endif
 };
 
-static struct net_proto_family inet_family_ops = {
+static const struct net_proto_family inet_family_ops = {
 	.family = PF_INET,
 	.create = inet_create,
 	.owner	= THIS_MODULE,
@@ -947,7 +948,6 @@
 		.protocol =   IPPROTO_TCP,
 		.prot =       &tcp_prot,
 		.ops =        &inet_stream_ops,
-		.capability = -1,
 		.no_check =   0,
 		.flags =      INET_PROTOSW_PERMANENT |
 			      INET_PROTOSW_ICSK,
@@ -958,7 +958,6 @@
 		.protocol =   IPPROTO_UDP,
 		.prot =       &udp_prot,
 		.ops =        &inet_dgram_ops,
-		.capability = -1,
 		.no_check =   UDP_CSUM_DEFAULT,
 		.flags =      INET_PROTOSW_PERMANENT,
        },
@@ -969,7 +968,6 @@
 	       .protocol =   IPPROTO_IP,	/* wild card */
 	       .prot =       &raw_prot,
 	       .ops =        &inet_sockraw_ops,
-	       .capability = CAP_NET_RAW,
 	       .no_check =   UDP_CSUM_DEFAULT,
 	       .flags =      INET_PROTOSW_REUSE,
        }
@@ -1059,9 +1057,9 @@
 	struct inet_sock *inet = inet_sk(sk);
 	int err;
 	struct rtable *rt;
-	__be32 old_saddr = inet->saddr;
+	__be32 old_saddr = inet->inet_saddr;
 	__be32 new_saddr;
-	__be32 daddr = inet->daddr;
+	__be32 daddr = inet->inet_daddr;
 
 	if (inet->opt && inet->opt->srr)
 		daddr = inet->opt->faddr;
@@ -1071,7 +1069,7 @@
 			       RT_CONN_FLAGS(sk),
 			       sk->sk_bound_dev_if,
 			       sk->sk_protocol,
-			       inet->sport, inet->dport, sk, 0);
+			       inet->inet_sport, inet->inet_dport, sk, 0);
 	if (err)
 		return err;
 
@@ -1087,7 +1085,7 @@
 		       __func__, &old_saddr, &new_saddr);
 	}
 
-	inet->saddr = inet->rcv_saddr = new_saddr;
+	inet->inet_saddr = inet->inet_rcv_saddr = new_saddr;
 
 	/*
 	 * XXX The only one ugly spot where we need to
@@ -1113,7 +1111,7 @@
 		return 0;
 
 	/* Reroute. */
-	daddr = inet->daddr;
+	daddr = inet->inet_daddr;
 	if (inet->opt && inet->opt->srr)
 		daddr = inet->opt->faddr;
 {
@@ -1123,7 +1121,7 @@
 		.nl_u = {
 			.ip4_u = {
 				.daddr	= daddr,
-				.saddr	= inet->saddr,
+				.saddr	= inet->inet_saddr,
 				.tos	= RT_CONN_FLAGS(sk),
 			},
 		},
@@ -1131,8 +1129,8 @@
 		.flags = inet_sk_flowi_flags(sk),
 		.uli_u = {
 			.ports = {
-				.sport = inet->sport,
-				.dport = inet->dport,
+				.sport = inet->inet_sport,
+				.dport = inet->inet_dport,
 			},
 		},
 	};
diff --git a/net/ipv4/ah4.c b/net/ipv4/ah4.c
index 5c66270..d07b0c1 100644
--- a/net/ipv4/ah4.c
+++ b/net/ipv4/ah4.c
@@ -1,3 +1,4 @@
+#include <crypto/hash.h>
 #include <linux/err.h>
 #include <linux/module.h>
 #include <net/ip.h>
@@ -5,10 +6,67 @@
 #include <net/ah.h>
 #include <linux/crypto.h>
 #include <linux/pfkeyv2.h>
-#include <linux/spinlock.h>
+#include <linux/scatterlist.h>
 #include <net/icmp.h>
 #include <net/protocol.h>
 
+struct ah_skb_cb {
+	struct xfrm_skb_cb xfrm;
+	void *tmp;
+};
+
+#define AH_SKB_CB(__skb) ((struct ah_skb_cb *)&((__skb)->cb[0]))
+
+static void *ah_alloc_tmp(struct crypto_ahash *ahash, int nfrags,
+			  unsigned int size)
+{
+	unsigned int len;
+
+	len = size + crypto_ahash_digestsize(ahash) +
+	      (crypto_ahash_alignmask(ahash) &
+	       ~(crypto_tfm_ctx_alignment() - 1));
+
+	len = ALIGN(len, crypto_tfm_ctx_alignment());
+
+	len += sizeof(struct ahash_request) + crypto_ahash_reqsize(ahash);
+	len = ALIGN(len, __alignof__(struct scatterlist));
+
+	len += sizeof(struct scatterlist) * nfrags;
+
+	return kmalloc(len, GFP_ATOMIC);
+}
+
+static inline u8 *ah_tmp_auth(void *tmp, unsigned int offset)
+{
+	return tmp + offset;
+}
+
+static inline u8 *ah_tmp_icv(struct crypto_ahash *ahash, void *tmp,
+			     unsigned int offset)
+{
+	return PTR_ALIGN((u8 *)tmp + offset, crypto_ahash_alignmask(ahash) + 1);
+}
+
+static inline struct ahash_request *ah_tmp_req(struct crypto_ahash *ahash,
+					       u8 *icv)
+{
+	struct ahash_request *req;
+
+	req = (void *)PTR_ALIGN(icv + crypto_ahash_digestsize(ahash),
+				crypto_tfm_ctx_alignment());
+
+	ahash_request_set_tfm(req, ahash);
+
+	return req;
+}
+
+static inline struct scatterlist *ah_req_sg(struct crypto_ahash *ahash,
+					     struct ahash_request *req)
+{
+	return (void *)ALIGN((unsigned long)(req + 1) +
+			     crypto_ahash_reqsize(ahash),
+			     __alignof__(struct scatterlist));
+}
 
 /* Clear mutable options and find final destination to substitute
  * into IP header for icv calculation. Options are already checked
@@ -54,20 +112,72 @@
 	return 0;
 }
 
+static void ah_output_done(struct crypto_async_request *base, int err)
+{
+	u8 *icv;
+	struct iphdr *iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	struct ah_data *ahp = x->data;
+	struct iphdr *top_iph = ip_hdr(skb);
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int ihl = ip_hdrlen(skb);
+
+	iph = AH_SKB_CB(skb)->tmp;
+	icv = ah_tmp_icv(ahp->ahash, iph, ihl);
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+
+	top_iph->tos = iph->tos;
+	top_iph->ttl = iph->ttl;
+	top_iph->frag_off = iph->frag_off;
+	if (top_iph->ihl != 5) {
+		top_iph->daddr = iph->daddr;
+		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
+	}
+
+	err = ah->nexthdr;
+
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_output_resume(skb, err);
+}
+
 static int ah_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err;
+	int nfrags;
+	int ihl;
+	u8 *icv;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct iphdr *iph, *top_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	union {
-		struct iphdr	iph;
-		char 		buf[60];
-	} tmp_iph;
+
+	ahp = x->data;
+	ahash = ahp->ahash;
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
 
 	skb_push(skb, -skb_network_offset(skb));
+	ah = ip_auth_hdr(skb);
+	ihl = ip_hdrlen(skb);
+
+	err = -ENOMEM;
+	iph = ah_alloc_tmp(ahash, nfrags, ihl);
+	if (!iph)
+		goto out;
+
+	icv = ah_tmp_icv(ahash, iph, ihl);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	top_iph = ip_hdr(skb);
-	iph = &tmp_iph.iph;
 
 	iph->tos = top_iph->tos;
 	iph->ttl = top_iph->ttl;
@@ -78,10 +188,9 @@
 		memcpy(iph+1, top_iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 		err = ip_clear_mutable_options(top_iph, &top_iph->daddr);
 		if (err)
-			goto error;
+			goto out_free;
 	}
 
-	ah = ip_auth_hdr(skb);
 	ah->nexthdr = *skb_mac_header(skb);
 	*skb_mac_header(skb) = IPPROTO_AH;
 
@@ -91,20 +200,31 @@
 	top_iph->ttl = 0;
 	top_iph->check = 0;
 
-	ahp = x->data;
 	ah->hdrlen  = (XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len) >> 2) - 2;
 
 	ah->reserved = 0;
 	ah->spi = x->id.spi;
 	ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output);
 
-	spin_lock_bh(&x->lock);
-	err = ah_mac_digest(ahp, skb, ah->auth_data);
-	memcpy(ah->auth_data, ahp->work_icv, ahp->icv_trunc_len);
-	spin_unlock_bh(&x->lock);
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-	if (err)
-		goto error;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah_output_done, skb);
+
+	AH_SKB_CB(skb)->tmp = iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
+	}
+
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
 
 	top_iph->tos = iph->tos;
 	top_iph->ttl = iph->ttl;
@@ -114,28 +234,67 @@
 		memcpy(top_iph+1, iph+1, top_iph->ihl*4 - sizeof(struct iphdr));
 	}
 
-	err = 0;
-
-error:
+out_free:
+	kfree(iph);
+out:
 	return err;
 }
 
+static void ah_input_done(struct crypto_async_request *base, int err)
+{
+	u8 *auth_data;
+	u8 *icv;
+	struct iphdr *work_iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = xfrm_input_state(skb);
+	struct ah_data *ahp = x->data;
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int ihl = ip_hdrlen(skb);
+	int ah_hlen = (ah->hdrlen + 2) << 2;
+
+	work_iph = AH_SKB_CB(skb)->tmp;
+	auth_data = ah_tmp_auth(work_iph, ihl);
+	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
+	if (err)
+		goto out;
+
+	skb->network_header += ah_hlen;
+	memcpy(skb_network_header(skb), work_iph, ihl);
+	__skb_pull(skb, ah_hlen + ihl);
+	skb_set_transport_header(skb, -ihl);
+
+	err = ah->nexthdr;
+out:
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_input_resume(skb, err);
+}
+
 static int ah_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int ah_hlen;
 	int ihl;
 	int nexthdr;
-	int err = -EINVAL;
-	struct iphdr *iph;
+	int nfrags;
+	u8 *auth_data;
+	u8 *icv;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
+	struct iphdr *iph, *work_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	char work_buf[60];
+	int err = -ENOMEM;
 
 	if (!pskb_may_pull(skb, sizeof(*ah)))
 		goto out;
 
 	ah = (struct ip_auth_hdr *)skb->data;
 	ahp = x->data;
+	ahash = ahp->ahash;
+
 	nexthdr = ah->nexthdr;
 	ah_hlen = (ah->hdrlen + 2) << 2;
 
@@ -156,9 +315,24 @@
 
 	ah = (struct ip_auth_hdr *)skb->data;
 	iph = ip_hdr(skb);
+	ihl = ip_hdrlen(skb);
 
-	ihl = skb->data - skb_network_header(skb);
-	memcpy(work_buf, iph, ihl);
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
+
+	work_iph = ah_alloc_tmp(ahash, nfrags, ihl + ahp->icv_trunc_len);
+	if (!work_iph)
+		goto out;
+
+	auth_data = ah_tmp_auth(work_iph, ihl);
+	icv = ah_tmp_icv(ahash, auth_data, ahp->icv_trunc_len);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memcpy(work_iph, iph, ihl);
+	memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
 
 	iph->ttl = 0;
 	iph->tos = 0;
@@ -166,35 +340,44 @@
 	iph->check = 0;
 	if (ihl > sizeof(*iph)) {
 		__be32 dummy;
-		if (ip_clear_mutable_options(iph, &dummy))
-			goto out;
-	}
-
-	spin_lock(&x->lock);
-	{
-		u8 auth_data[MAX_AH_AUTH_LEN];
-
-		memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
-		skb_push(skb, ihl);
-		err = ah_mac_digest(ahp, skb, ah->auth_data);
+		err = ip_clear_mutable_options(iph, &dummy);
 		if (err)
-			goto unlock;
-		if (memcmp(ahp->work_icv, auth_data, ahp->icv_trunc_len))
-			err = -EBADMSG;
+			goto out_free;
 	}
-unlock:
-	spin_unlock(&x->lock);
 
+	skb_push(skb, ihl);
+
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
+
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah_input_done, skb);
+
+	AH_SKB_CB(skb)->tmp = work_iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
+	}
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
 	if (err)
-		goto out;
+		goto out_free;
 
 	skb->network_header += ah_hlen;
-	memcpy(skb_network_header(skb), work_buf, ihl);
-	skb->transport_header = skb->network_header;
+	memcpy(skb_network_header(skb), work_iph, ihl);
 	__skb_pull(skb, ah_hlen + ihl);
+	skb_set_transport_header(skb, -ihl);
 
-	return nexthdr;
+	err = nexthdr;
 
+out_free:
+	kfree (work_iph);
 out:
 	return err;
 }
@@ -222,7 +405,7 @@
 {
 	struct ah_data *ahp = NULL;
 	struct xfrm_algo_desc *aalg_desc;
-	struct crypto_hash *tfm;
+	struct crypto_ahash *ahash;
 
 	if (!x->aalg)
 		goto error;
@@ -231,31 +414,31 @@
 		goto error;
 
 	ahp = kzalloc(sizeof(*ahp), GFP_KERNEL);
-	if (ahp == NULL)
+	if (!ahp)
 		return -ENOMEM;
 
-	tfm = crypto_alloc_hash(x->aalg->alg_name, 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
+	ahash = crypto_alloc_ahash(x->aalg->alg_name, 0, 0);
+	if (IS_ERR(ahash))
 		goto error;
 
-	ahp->tfm = tfm;
-	if (crypto_hash_setkey(tfm, x->aalg->alg_key,
-			       (x->aalg->alg_key_len + 7) / 8))
+	ahp->ahash = ahash;
+	if (crypto_ahash_setkey(ahash, x->aalg->alg_key,
+				(x->aalg->alg_key_len + 7) / 8))
 		goto error;
 
 	/*
 	 * Lookup the algorithm description maintained by xfrm_algo,
 	 * verify crypto transform properties, and store information
 	 * we need for AH processing.  This lookup cannot fail here
-	 * after a successful crypto_alloc_hash().
+	 * after a successful crypto_alloc_ahash().
 	 */
 	aalg_desc = xfrm_aalg_get_byname(x->aalg->alg_name, 0);
 	BUG_ON(!aalg_desc);
 
 	if (aalg_desc->uinfo.auth.icv_fullbits/8 !=
-	    crypto_hash_digestsize(tfm)) {
+	    crypto_ahash_digestsize(ahash)) {
 		printk(KERN_INFO "AH: %s digestsize %u != %hu\n",
-		       x->aalg->alg_name, crypto_hash_digestsize(tfm),
+		       x->aalg->alg_name, crypto_ahash_digestsize(ahash),
 		       aalg_desc->uinfo.auth.icv_fullbits/8);
 		goto error;
 	}
@@ -265,10 +448,6 @@
 
 	BUG_ON(ahp->icv_trunc_len > MAX_AH_AUTH_LEN);
 
-	ahp->work_icv = kmalloc(ahp->icv_full_len, GFP_KERNEL);
-	if (!ahp->work_icv)
-		goto error;
-
 	x->props.header_len = XFRM_ALIGN8(sizeof(struct ip_auth_hdr) +
 					  ahp->icv_trunc_len);
 	if (x->props.mode == XFRM_MODE_TUNNEL)
@@ -279,8 +458,7 @@
 
 error:
 	if (ahp) {
-		kfree(ahp->work_icv);
-		crypto_free_hash(ahp->tfm);
+		crypto_free_ahash(ahp->ahash);
 		kfree(ahp);
 	}
 	return -EINVAL;
@@ -293,8 +471,7 @@
 	if (!ahp)
 		return;
 
-	kfree(ahp->work_icv);
-	crypto_free_hash(ahp->tfm);
+	crypto_free_ahash(ahp->ahash);
 	kfree(ahp);
 }
 
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 039cc1f..1e029dc 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -2017,7 +2017,7 @@
  * values on failure.
  *
  */
-int cipso_v4_delopt(struct ip_options **opt_ptr)
+static int cipso_v4_delopt(struct ip_options **opt_ptr)
 {
 	int hdr_delta = 0;
 	struct ip_options *opt = *opt_ptr;
diff --git a/net/ipv4/datagram.c b/net/ipv4/datagram.c
index 5e6c5a0..fb24658 100644
--- a/net/ipv4/datagram.c
+++ b/net/ipv4/datagram.c
@@ -39,7 +39,7 @@
 	sk_dst_reset(sk);
 
 	oif = sk->sk_bound_dev_if;
-	saddr = inet->saddr;
+	saddr = inet->inet_saddr;
 	if (ipv4_is_multicast(usin->sin_addr.s_addr)) {
 		if (!oif)
 			oif = inet->mc_index;
@@ -49,7 +49,7 @@
 	err = ip_route_connect(&rt, usin->sin_addr.s_addr, saddr,
 			       RT_CONN_FLAGS(sk), oif,
 			       sk->sk_protocol,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (err) {
 		if (err == -ENETUNREACH)
 			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
@@ -60,14 +60,14 @@
 		ip_rt_put(rt);
 		return -EACCES;
 	}
-	if (!inet->saddr)
-		inet->saddr = rt->rt_src;	/* Update source address */
-	if (!inet->rcv_saddr)
-		inet->rcv_saddr = rt->rt_src;
-	inet->daddr = rt->rt_dst;
-	inet->dport = usin->sin_port;
+	if (!inet->inet_saddr)
+		inet->inet_saddr = rt->rt_src;	/* Update source address */
+	if (!inet->inet_rcv_saddr)
+		inet->inet_rcv_saddr = rt->rt_src;
+	inet->inet_daddr = rt->rt_dst;
+	inet->inet_dport = usin->sin_port;
 	sk->sk_state = TCP_ESTABLISHED;
-	inet->id = jiffies;
+	inet->inet_id = jiffies;
 
 	sk_dst_set(sk, &rt->u.dst);
 	return(0);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 5df2f6a..c2045f9 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -140,11 +140,11 @@
 #endif
 	dev_put(dev);
 	if (!idev->dead)
-		printk("Freeing alive in_device %p\n", idev);
-	else {
+		pr_err("Freeing alive in_device %p\n", idev);
+	else
 		kfree(idev);
-	}
 }
+EXPORT_SYMBOL(in_dev_finish_destroy);
 
 static struct in_device *inetdev_init(struct net_device *dev)
 {
@@ -159,7 +159,8 @@
 			sizeof(in_dev->cnf));
 	in_dev->cnf.sysctl = NULL;
 	in_dev->dev = dev;
-	if ((in_dev->arp_parms = neigh_parms_alloc(dev, &arp_tbl)) == NULL)
+	in_dev->arp_parms = neigh_parms_alloc(dev, &arp_tbl);
+	if (!in_dev->arp_parms)
 		goto out_kfree;
 	if (IPV4_DEVCONF(in_dev->cnf, FORWARDING))
 		dev_disable_lro(dev);
@@ -405,13 +406,15 @@
 {
 	struct net_device *dev;
 	struct in_device *in_dev = NULL;
-	read_lock(&dev_base_lock);
-	dev = __dev_get_by_index(net, ifindex);
+
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, ifindex);
 	if (dev)
 		in_dev = in_dev_get(dev);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return in_dev;
 }
+EXPORT_SYMBOL(inetdev_by_index);
 
 /* Called only from RTNL semaphored context. No locks. */
 
@@ -557,7 +560,7 @@
  *	Determine a default network mask, based on the IP address.
  */
 
-static __inline__ int inet_abc_len(__be32 addr)
+static inline int inet_abc_len(__be32 addr)
 {
 	int rc = -1;	/* Something else, probably a multicast. */
 
@@ -646,13 +649,15 @@
 	rtnl_lock();
 
 	ret = -ENODEV;
-	if ((dev = __dev_get_by_name(net, ifr.ifr_name)) == NULL)
+	dev = __dev_get_by_name(net, ifr.ifr_name);
+	if (!dev)
 		goto done;
 
 	if (colon)
 		*colon = ':';
 
-	if ((in_dev = __in_dev_get_rtnl(dev)) != NULL) {
+	in_dev = __in_dev_get_rtnl(dev);
+	if (in_dev) {
 		if (tryaddrmatch) {
 			/* Matthias Andree */
 			/* compare label and address (4.4BSD style) */
@@ -720,7 +725,8 @@
 
 		if (!ifa) {
 			ret = -ENOBUFS;
-			if ((ifa = inet_alloc_ifa()) == NULL)
+			ifa = inet_alloc_ifa();
+			if (!ifa)
 				break;
 			if (colon)
 				memcpy(ifa->ifa_label, ifr.ifr_name, IFNAMSIZ);
@@ -822,10 +828,10 @@
 	struct ifreq ifr;
 	int done = 0;
 
-	if (!in_dev || (ifa = in_dev->ifa_list) == NULL)
+	if (!in_dev)
 		goto out;
 
-	for (; ifa; ifa = ifa->ifa_next) {
+	for (ifa = in_dev->ifa_list; ifa; ifa = ifa->ifa_next) {
 		if (!buf) {
 			done += sizeof(ifr);
 			continue;
@@ -875,36 +881,33 @@
 		if (!addr)
 			addr = ifa->ifa_local;
 	} endfor_ifa(in_dev);
-no_in_dev:
-	rcu_read_unlock();
 
 	if (addr)
-		goto out;
+		goto out_unlock;
+no_in_dev:
 
 	/* Not loopback addresses on loopback should be preferred
 	   in this case. It is importnat that lo is the first interface
 	   in dev_base list.
 	 */
-	read_lock(&dev_base_lock);
-	rcu_read_lock();
-	for_each_netdev(net, dev) {
-		if ((in_dev = __in_dev_get_rcu(dev)) == NULL)
+	for_each_netdev_rcu(net, dev) {
+		in_dev = __in_dev_get_rcu(dev);
+		if (!in_dev)
 			continue;
 
 		for_primary_ifa(in_dev) {
 			if (ifa->ifa_scope != RT_SCOPE_LINK &&
 			    ifa->ifa_scope <= scope) {
 				addr = ifa->ifa_local;
-				goto out_unlock_both;
+				goto out_unlock;
 			}
 		} endfor_ifa(in_dev);
 	}
-out_unlock_both:
-	read_unlock(&dev_base_lock);
+out_unlock:
 	rcu_read_unlock();
-out:
 	return addr;
 }
+EXPORT_SYMBOL(inet_select_addr);
 
 static __be32 confirm_addr_indev(struct in_device *in_dev, __be32 dst,
 			      __be32 local, int scope)
@@ -940,7 +943,7 @@
 		}
 	} endfor_ifa(in_dev);
 
-	return same? addr : 0;
+	return same ? addr : 0;
 }
 
 /*
@@ -961,17 +964,16 @@
 		return confirm_addr_indev(in_dev, dst, local, scope);
 
 	net = dev_net(in_dev->dev);
-	read_lock(&dev_base_lock);
 	rcu_read_lock();
-	for_each_netdev(net, dev) {
-		if ((in_dev = __in_dev_get_rcu(dev))) {
+	for_each_netdev_rcu(net, dev) {
+		in_dev = __in_dev_get_rcu(dev);
+		if (in_dev) {
 			addr = confirm_addr_indev(in_dev, dst, local, scope);
 			if (addr)
 				break;
 		}
 	}
 	rcu_read_unlock();
-	read_unlock(&dev_base_lock);
 
 	return addr;
 }
@@ -984,14 +986,16 @@
 {
 	return blocking_notifier_chain_register(&inetaddr_chain, nb);
 }
+EXPORT_SYMBOL(register_inetaddr_notifier);
 
 int unregister_inetaddr_notifier(struct notifier_block *nb)
 {
 	return blocking_notifier_chain_unregister(&inetaddr_chain, nb);
 }
+EXPORT_SYMBOL(unregister_inetaddr_notifier);
 
-/* Rename ifa_labels for a device name change. Make some effort to preserve existing
- * alias numbering and to create unique labels if possible.
+/* Rename ifa_labels for a device name change. Make some effort to preserve
+ * existing alias numbering and to create unique labels if possible.
 */
 static void inetdev_changename(struct net_device *dev, struct in_device *in_dev)
 {
@@ -1010,11 +1014,10 @@
 			sprintf(old, ":%d", named);
 			dot = old;
 		}
-		if (strlen(dot) + strlen(dev->name) < IFNAMSIZ) {
+		if (strlen(dot) + strlen(dev->name) < IFNAMSIZ)
 			strcat(ifa->ifa_label, dot);
-		} else {
+		else
 			strcpy(ifa->ifa_label + (IFNAMSIZ - strlen(dot) - 1), dot);
-		}
 skip:
 		rtmsg_ifa(RTM_NEWADDR, ifa, NULL, 0);
 	}
@@ -1061,8 +1064,9 @@
 		if (!inetdev_valid_mtu(dev->mtu))
 			break;
 		if (dev->flags & IFF_LOOPBACK) {
-			struct in_ifaddr *ifa;
-			if ((ifa = inet_alloc_ifa()) != NULL) {
+			struct in_ifaddr *ifa = inet_alloc_ifa();
+
+			if (ifa) {
 				ifa->ifa_local =
 				  ifa->ifa_address = htonl(INADDR_LOOPBACK);
 				ifa->ifa_prefixlen = 8;
@@ -1183,7 +1187,8 @@
 			goto cont;
 		if (idx > s_idx)
 			s_ip_idx = 0;
-		if ((in_dev = __in_dev_get_rtnl(dev)) == NULL)
+		in_dev = __in_dev_get_rtnl(dev);
+		if (!in_dev)
 			goto cont;
 
 		for (ifa = in_dev->ifa_list, ip_idx = 0; ifa;
@@ -1239,18 +1244,18 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		struct in_device *in_dev;
-		rcu_read_lock();
+
 		in_dev = __in_dev_get_rcu(dev);
 		if (in_dev && !test_bit(i, in_dev->cnf.state))
 			in_dev->cnf.data[i] = net->ipv4.devconf_dflt->data[i];
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
+/* called with RTNL locked */
 static void inet_forward_change(struct net *net)
 {
 	struct net_device *dev;
@@ -1259,7 +1264,6 @@
 	IPV4_DEVCONF_ALL(net, ACCEPT_REDIRECTS) = !on;
 	IPV4_DEVCONF_DFLT(net, FORWARDING) = on;
 
-	read_lock(&dev_base_lock);
 	for_each_netdev(net, dev) {
 		struct in_device *in_dev;
 		if (on)
@@ -1270,7 +1274,6 @@
 			IN_DEV_CONF_SET(in_dev, FORWARDING, on);
 		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
 }
 
 static int devinet_conf_proc(ctl_table *ctl, int write,
@@ -1680,8 +1683,3 @@
 	rtnl_register(PF_INET, RTM_GETADDR, NULL, inet_dump_ifaddr);
 }
 
-EXPORT_SYMBOL(in_dev_finish_destroy);
-EXPORT_SYMBOL(inet_select_addr);
-EXPORT_SYMBOL(inetdev_by_index);
-EXPORT_SYMBOL(register_inetaddr_notifier);
-EXPORT_SYMBOL(unregister_inetaddr_notifier);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index aa00398..816e218 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -125,7 +125,7 @@
 #endif
 	tb = fib_get_table(net, table);
 	if (FIB_RES_GW(*res) && FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK)
-		tb->tb_select_default(tb, flp, res);
+		fib_table_select_default(tb, flp, res);
 }
 
 static void fib_flush(struct net *net)
@@ -139,7 +139,7 @@
 	for (h = 0; h < FIB_TABLE_HASHSZ; h++) {
 		head = &net->ipv4.fib_table_hash[h];
 		hlist_for_each_entry(tb, node, head, tb_hlist)
-			flushed += tb->tb_flush(tb);
+			flushed += fib_table_flush(tb);
 	}
 
 	if (flushed)
@@ -162,7 +162,7 @@
 #endif
 
 	local_table = fib_get_table(net, RT_TABLE_LOCAL);
-	if (!local_table || local_table->tb_lookup(local_table, &fl, &res))
+	if (!local_table || fib_table_lookup(local_table, &fl, &res))
 		return NULL;
 	if (res.type != RTN_LOCAL)
 		goto out;
@@ -200,7 +200,7 @@
 	local_table = fib_get_table(net, RT_TABLE_LOCAL);
 	if (local_table) {
 		ret = RTN_UNICAST;
-		if (!local_table->tb_lookup(local_table, &fl, &res)) {
+		if (!fib_table_lookup(local_table, &fl, &res)) {
 			if (!dev || dev == res.fi->fib_dev)
 				ret = res.type;
 			fib_res_put(&res);
@@ -476,13 +476,13 @@
 			if (cmd == SIOCDELRT) {
 				tb = fib_get_table(net, cfg.fc_table);
 				if (tb)
-					err = tb->tb_delete(tb, &cfg);
+					err = fib_table_delete(tb, &cfg);
 				else
 					err = -ESRCH;
 			} else {
 				tb = fib_new_table(net, cfg.fc_table);
 				if (tb)
-					err = tb->tb_insert(tb, &cfg);
+					err = fib_table_insert(tb, &cfg);
 				else
 					err = -ENOBUFS;
 			}
@@ -597,7 +597,7 @@
 		goto errout;
 	}
 
-	err = tb->tb_delete(tb, &cfg);
+	err = fib_table_delete(tb, &cfg);
 errout:
 	return err;
 }
@@ -619,7 +619,7 @@
 		goto errout;
 	}
 
-	err = tb->tb_insert(tb, &cfg);
+	err = fib_table_insert(tb, &cfg);
 errout:
 	return err;
 }
@@ -650,7 +650,7 @@
 			if (dumped)
 				memset(&cb->args[2], 0, sizeof(cb->args) -
 						 2 * sizeof(cb->args[0]));
-			if (tb->tb_dump(tb, skb, cb) < 0)
+			if (fib_table_dump(tb, skb, cb) < 0)
 				goto out;
 			dumped = 1;
 next:
@@ -704,9 +704,9 @@
 		cfg.fc_scope = RT_SCOPE_HOST;
 
 	if (cmd == RTM_NEWROUTE)
-		tb->tb_insert(tb, &cfg);
+		fib_table_insert(tb, &cfg);
 	else
-		tb->tb_delete(tb, &cfg);
+		fib_table_delete(tb, &cfg);
 }
 
 void fib_add_ifaddr(struct in_ifaddr *ifa)
@@ -835,7 +835,7 @@
 		local_bh_disable();
 
 		frn->tb_id = tb->tb_id;
-		frn->err = tb->tb_lookup(tb, &fl, &res);
+		frn->err = fib_table_lookup(tb, &fl, &res);
 
 		if (!frn->err) {
 			frn->prefixlen = res.prefixlen;
@@ -1012,7 +1012,7 @@
 		head = &net->ipv4.fib_table_hash[i];
 		hlist_for_each_entry_safe(tb, node, tmp, head, tb_hlist) {
 			hlist_del(node);
-			tb->tb_flush(tb);
+			fib_table_flush(tb);
 			kfree(tb);
 		}
 	}
diff --git a/net/ipv4/fib_hash.c b/net/ipv4/fib_hash.c
index ecd3945..14972017b 100644
--- a/net/ipv4/fib_hash.c
+++ b/net/ipv4/fib_hash.c
@@ -242,8 +242,8 @@
 	return fz;
 }
 
-static int
-fn_hash_lookup(struct fib_table *tb, const struct flowi *flp, struct fib_result *res)
+int fib_table_lookup(struct fib_table *tb,
+		     const struct flowi *flp, struct fib_result *res)
 {
 	int err;
 	struct fn_zone *fz;
@@ -274,8 +274,8 @@
 	return err;
 }
 
-static void
-fn_hash_select_default(struct fib_table *tb, const struct flowi *flp, struct fib_result *res)
+void fib_table_select_default(struct fib_table *tb,
+			      const struct flowi *flp, struct fib_result *res)
 {
 	int order, last_idx;
 	struct hlist_node *node;
@@ -366,7 +366,7 @@
 	return NULL;
 }
 
-static int fn_hash_insert(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_insert(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct fn_hash *table = (struct fn_hash *) tb->tb_data;
 	struct fib_node *new_f = NULL;
@@ -544,8 +544,7 @@
 	return err;
 }
 
-
-static int fn_hash_delete(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_delete(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct fn_hash *table = (struct fn_hash *)tb->tb_data;
 	struct fib_node *f;
@@ -662,7 +661,7 @@
 	return found;
 }
 
-static int fn_hash_flush(struct fib_table *tb)
+int fib_table_flush(struct fib_table *tb)
 {
 	struct fn_hash *table = (struct fn_hash *) tb->tb_data;
 	struct fn_zone *fz;
@@ -743,7 +742,8 @@
 	return skb->len;
 }
 
-static int fn_hash_dump(struct fib_table *tb, struct sk_buff *skb, struct netlink_callback *cb)
+int fib_table_dump(struct fib_table *tb, struct sk_buff *skb,
+		   struct netlink_callback *cb)
 {
 	int m, s_m;
 	struct fn_zone *fz;
@@ -787,12 +787,7 @@
 
 	tb->tb_id = id;
 	tb->tb_default = -1;
-	tb->tb_lookup = fn_hash_lookup;
-	tb->tb_insert = fn_hash_insert;
-	tb->tb_delete = fn_hash_delete;
-	tb->tb_flush = fn_hash_flush;
-	tb->tb_select_default = fn_hash_select_default;
-	tb->tb_dump = fn_hash_dump;
+
 	memset(tb->tb_data, 0, sizeof(struct fn_hash));
 	return tb;
 }
diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c
index 92d9d97..835262c 100644
--- a/net/ipv4/fib_rules.c
+++ b/net/ipv4/fib_rules.c
@@ -94,7 +94,7 @@
 	if ((tbl = fib_get_table(rule->fr_net, rule->table)) == NULL)
 		goto errout;
 
-	err = tbl->tb_lookup(tbl, flp, (struct fib_result *) arg->result);
+	err = fib_table_lookup(tbl, flp, (struct fib_result *) arg->result);
 	if (err > 0)
 		err = -EAGAIN;
 errout:
diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c
index 291bdf5..af5d897 100644
--- a/net/ipv4/fib_trie.c
+++ b/net/ipv4/fib_trie.c
@@ -1174,7 +1174,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_insert(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_insert(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	struct fib_alias *fa, *new_fa;
@@ -1373,8 +1373,8 @@
 	return 1;
 }
 
-static int fn_trie_lookup(struct fib_table *tb, const struct flowi *flp,
-			  struct fib_result *res)
+int fib_table_lookup(struct fib_table *tb, const struct flowi *flp,
+		     struct fib_result *res)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	int ret;
@@ -1595,7 +1595,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_delete(struct fib_table *tb, struct fib_config *cfg)
+int fib_table_delete(struct fib_table *tb, struct fib_config *cfg)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	u32 key, mask;
@@ -1786,7 +1786,7 @@
 /*
  * Caller must hold RTNL.
  */
-static int fn_trie_flush(struct fib_table *tb)
+int fib_table_flush(struct fib_table *tb)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	struct leaf *l, *ll = NULL;
@@ -1807,9 +1807,9 @@
 	return found;
 }
 
-static void fn_trie_select_default(struct fib_table *tb,
-				   const struct flowi *flp,
-				   struct fib_result *res)
+void fib_table_select_default(struct fib_table *tb,
+			      const struct flowi *flp,
+			      struct fib_result *res)
 {
 	struct trie *t = (struct trie *) tb->tb_data;
 	int order, last_idx;
@@ -1952,8 +1952,8 @@
 	return skb->len;
 }
 
-static int fn_trie_dump(struct fib_table *tb, struct sk_buff *skb,
-			struct netlink_callback *cb)
+int fib_table_dump(struct fib_table *tb, struct sk_buff *skb,
+		   struct netlink_callback *cb)
 {
 	struct leaf *l;
 	struct trie *t = (struct trie *) tb->tb_data;
@@ -2020,12 +2020,6 @@
 
 	tb->tb_id = id;
 	tb->tb_default = -1;
-	tb->tb_lookup = fn_trie_lookup;
-	tb->tb_insert = fn_trie_insert;
-	tb->tb_delete = fn_trie_delete;
-	tb->tb_flush = fn_trie_flush;
-	tb->tb_select_default = fn_trie_select_default;
-	tb->tb_dump = fn_trie_dump;
 
 	t = (struct trie *) tb->tb_data;
 	memset(t, 0, sizeof(*t));
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 5bc13fe..fe11f60 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -501,15 +501,16 @@
 	if (!(rt->rt_flags & RTCF_LOCAL)) {
 		struct net_device *dev = NULL;
 
+		rcu_read_lock();
 		if (rt->fl.iif &&
 			net->ipv4.sysctl_icmp_errors_use_inbound_ifaddr)
-			dev = dev_get_by_index(net, rt->fl.iif);
+			dev = dev_get_by_index_rcu(net, rt->fl.iif);
 
-		if (dev) {
+		if (dev)
 			saddr = inet_select_addr(dev, 0, RT_SCOPE_LINK);
-			dev_put(dev);
-		} else
+		else
 			saddr = 0;
+		rcu_read_unlock();
 	}
 
 	tos = icmp_pointers[type].error ? ((iph->tos & IPTOS_TOS_MASK) |
@@ -1165,6 +1166,10 @@
 		sk->sk_sndbuf =
 			(2 * ((64 * 1024) + sizeof(struct sk_buff)));
 
+		/*
+		 * Speedup sock_wfree()
+		 */
+		sock_set_flag(sk, SOCK_USE_WRITE_QUEUE);
 		inet_sk(sk)->pmtudisc = IP_PMTUDISC_DONT;
 	}
 
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 537731b..26fb50e 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -358,6 +358,7 @@
 	const struct inet_request_sock *ireq = inet_rsk(req);
 	struct ip_options *opt = inet_rsk(req)->opt;
 	struct flowi fl = { .oif = sk->sk_bound_dev_if,
+			    .mark = sk->sk_mark,
 			    .nl_u = { .ip4_u =
 				      { .daddr = ((opt && opt->srr) ?
 						  opt->faddr :
@@ -367,7 +368,7 @@
 			    .proto = sk->sk_protocol,
 			    .flags = inet_sk_flowi_flags(sk),
 			    .uli_u = { .ports =
-				       { .sport = inet_sk(sk)->sport,
+				       { .sport = inet_sk(sk)->inet_sport,
 					 .dport = ireq->rmt_port } } };
 	struct net *net = sock_net(sk);
 
@@ -574,9 +575,9 @@
 		newsk->sk_state = TCP_SYN_RECV;
 		newicsk->icsk_bind_hash = NULL;
 
-		inet_sk(newsk)->dport = inet_rsk(req)->rmt_port;
-		inet_sk(newsk)->num = ntohs(inet_rsk(req)->loc_port);
-		inet_sk(newsk)->sport = inet_rsk(req)->loc_port;
+		inet_sk(newsk)->inet_dport = inet_rsk(req)->rmt_port;
+		inet_sk(newsk)->inet_num = ntohs(inet_rsk(req)->loc_port);
+		inet_sk(newsk)->inet_sport = inet_rsk(req)->loc_port;
 		newsk->sk_write_space = sk_stream_write_space;
 
 		newicsk->icsk_retransmits = 0;
@@ -607,8 +608,8 @@
 	/* It cannot be in hash table! */
 	WARN_ON(!sk_unhashed(sk));
 
-	/* If it has not 0 inet_sk(sk)->num, it must be bound */
-	WARN_ON(inet_sk(sk)->num && !inet_csk(sk)->icsk_bind_hash);
+	/* If it has not 0 inet_sk(sk)->inet_num, it must be bound */
+	WARN_ON(inet_sk(sk)->inet_num && !inet_csk(sk)->icsk_bind_hash);
 
 	sk->sk_prot->destroy(sk);
 
@@ -643,8 +644,8 @@
 	 * after validation is complete.
 	 */
 	sk->sk_state = TCP_LISTEN;
-	if (!sk->sk_prot->get_port(sk, inet->num)) {
-		inet->sport = htons(inet->num);
+	if (!sk->sk_prot->get_port(sk, inet->inet_num)) {
+		inet->inet_sport = htons(inet->inet_num);
 
 		sk_dst_reset(sk);
 		sk->sk_prot->hash(sk);
@@ -720,8 +721,8 @@
 	const struct inet_sock *inet = inet_sk(sk);
 
 	sin->sin_family		= AF_INET;
-	sin->sin_addr.s_addr	= inet->daddr;
-	sin->sin_port		= inet->dport;
+	sin->sin_addr.s_addr	= inet->inet_daddr;
+	sin->sin_port		= inet->inet_dport;
 }
 
 EXPORT_SYMBOL_GPL(inet_csk_addr2sockaddr);
diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c
index a706a47..bdb78dd 100644
--- a/net/ipv4/inet_diag.c
+++ b/net/ipv4/inet_diag.c
@@ -116,10 +116,10 @@
 	r->id.idiag_cookie[0] = (u32)(unsigned long)sk;
 	r->id.idiag_cookie[1] = (u32)(((unsigned long)sk >> 31) >> 1);
 
-	r->id.idiag_sport = inet->sport;
-	r->id.idiag_dport = inet->dport;
-	r->id.idiag_src[0] = inet->rcv_saddr;
-	r->id.idiag_dst[0] = inet->daddr;
+	r->id.idiag_sport = inet->inet_sport;
+	r->id.idiag_dport = inet->inet_dport;
+	r->id.idiag_src[0] = inet->inet_rcv_saddr;
+	r->id.idiag_dst[0] = inet->inet_daddr;
 
 #if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
 	if (r->idiag_family == AF_INET6) {
@@ -504,11 +504,11 @@
 		} else
 #endif
 		{
-			entry.saddr = &inet->rcv_saddr;
-			entry.daddr = &inet->daddr;
+			entry.saddr = &inet->inet_rcv_saddr;
+			entry.daddr = &inet->inet_daddr;
 		}
-		entry.sport = inet->num;
-		entry.dport = ntohs(inet->dport);
+		entry.sport = inet->inet_num;
+		entry.dport = ntohs(inet->inet_dport);
 		entry.userlocks = sk->sk_userlocks;
 
 		if (!inet_diag_bc_run(RTA_DATA(bc), RTA_PAYLOAD(bc), &entry))
@@ -584,7 +584,7 @@
 	if (tmo < 0)
 		tmo = 0;
 
-	r->id.idiag_sport = inet->sport;
+	r->id.idiag_sport = inet->inet_sport;
 	r->id.idiag_dport = ireq->rmt_port;
 	r->id.idiag_src[0] = ireq->loc_addr;
 	r->id.idiag_dst[0] = ireq->rmt_addr;
@@ -639,7 +639,7 @@
 
 	if (cb->nlh->nlmsg_len > 4 + NLMSG_SPACE(sizeof(*r))) {
 		bc = (struct rtattr *)(r + 1);
-		entry.sport = inet->num;
+		entry.sport = inet->inet_num;
 		entry.userlocks = sk->sk_userlocks;
 	}
 
@@ -732,7 +732,7 @@
 					continue;
 				}
 
-				if (r->id.idiag_sport != inet->sport &&
+				if (r->id.idiag_sport != inet->inet_sport &&
 				    r->id.idiag_sport)
 					goto next_listen;
 
@@ -774,7 +774,7 @@
 	if (!(r->idiag_states & ~(TCPF_LISTEN | TCPF_SYN_RECV)))
 		goto unlock;
 
-	for (i = s_i; i < hashinfo->ehash_size; i++) {
+	for (i = s_i; i <= hashinfo->ehash_mask; i++) {
 		struct inet_ehash_bucket *head = &hashinfo->ehash[i];
 		spinlock_t *lock = inet_ehash_lockp(hashinfo, i);
 		struct sock *sk;
@@ -797,10 +797,10 @@
 				goto next_normal;
 			if (!(r->idiag_states & (1 << sk->sk_state)))
 				goto next_normal;
-			if (r->id.idiag_sport != inet->sport &&
+			if (r->id.idiag_sport != inet->inet_sport &&
 			    r->id.idiag_sport)
 				goto next_normal;
-			if (r->id.idiag_dport != inet->dport &&
+			if (r->id.idiag_dport != inet->inet_dport &&
 			    r->id.idiag_dport)
 				goto next_normal;
 			if (inet_csk_diag_dump(sk, skb, cb) < 0) {
diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c
index 625cc5f..47ad7aa 100644
--- a/net/ipv4/inet_hashtables.c
+++ b/net/ipv4/inet_hashtables.c
@@ -64,7 +64,7 @@
 
 	atomic_inc(&hashinfo->bsockets);
 
-	inet_sk(sk)->num = snum;
+	inet_sk(sk)->inet_num = snum;
 	sk_add_bind_node(sk, &tb->owners);
 	tb->num_owners++;
 	inet_csk(sk)->icsk_bind_hash = tb;
@@ -76,7 +76,7 @@
 static void __inet_put_port(struct sock *sk)
 {
 	struct inet_hashinfo *hashinfo = sk->sk_prot->h.hashinfo;
-	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->num,
+	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(sk)->inet_num,
 			hashinfo->bhash_size);
 	struct inet_bind_hashbucket *head = &hashinfo->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -88,7 +88,7 @@
 	__sk_del_bind_node(sk);
 	tb->num_owners--;
 	inet_csk(sk)->icsk_bind_hash = NULL;
-	inet_sk(sk)->num = 0;
+	inet_sk(sk)->inet_num = 0;
 	inet_bind_bucket_destroy(hashinfo->bind_bucket_cachep, tb);
 	spin_unlock(&head->lock);
 }
@@ -105,7 +105,7 @@
 void __inet_inherit_port(struct sock *sk, struct sock *child)
 {
 	struct inet_hashinfo *table = sk->sk_prot->h.hashinfo;
-	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(child)->num,
+	const int bhash = inet_bhashfn(sock_net(sk), inet_sk(child)->inet_num,
 			table->bhash_size);
 	struct inet_bind_hashbucket *head = &table->bhash[bhash];
 	struct inet_bind_bucket *tb;
@@ -126,9 +126,9 @@
 	int score = -1;
 	struct inet_sock *inet = inet_sk(sk);
 
-	if (net_eq(sock_net(sk), net) && inet->num == hnum &&
+	if (net_eq(sock_net(sk), net) && inet->inet_num == hnum &&
 			!ipv6_only_sock(sk)) {
-		__be32 rcv_saddr = inet->rcv_saddr;
+		__be32 rcv_saddr = inet->inet_rcv_saddr;
 		score = sk->sk_family == PF_INET ? 1 : 0;
 		if (rcv_saddr) {
 			if (rcv_saddr != daddr)
@@ -209,7 +209,7 @@
 	 * have wildcards anyways.
 	 */
 	unsigned int hash = inet_ehashfn(net, daddr, hnum, saddr, sport);
-	unsigned int slot = hash & (hashinfo->ehash_size - 1);
+	unsigned int slot = hash & hashinfo->ehash_mask;
 	struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
 
 	rcu_read_lock();
@@ -273,13 +273,14 @@
 {
 	struct inet_hashinfo *hinfo = death_row->hashinfo;
 	struct inet_sock *inet = inet_sk(sk);
-	__be32 daddr = inet->rcv_saddr;
-	__be32 saddr = inet->daddr;
+	__be32 daddr = inet->inet_rcv_saddr;
+	__be32 saddr = inet->inet_daddr;
 	int dif = sk->sk_bound_dev_if;
 	INET_ADDR_COOKIE(acookie, saddr, daddr)
-	const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
+	const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
 	struct net *net = sock_net(sk);
-	unsigned int hash = inet_ehashfn(net, daddr, lport, saddr, inet->dport);
+	unsigned int hash = inet_ehashfn(net, daddr, lport,
+					 saddr, inet->inet_dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
 	spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
@@ -312,8 +313,8 @@
 unique:
 	/* Must record num and sport now. Otherwise we will see
 	 * in hash table socket with a funny identity. */
-	inet->num = lport;
-	inet->sport = htons(lport);
+	inet->inet_num = lport;
+	inet->inet_sport = htons(lport);
 	sk->sk_hash = hash;
 	WARN_ON(!sk_unhashed(sk));
 	__sk_nulls_add_node_rcu(sk, &head->chain);
@@ -341,8 +342,9 @@
 static inline u32 inet_sk_port_offset(const struct sock *sk)
 {
 	const struct inet_sock *inet = inet_sk(sk);
-	return secure_ipv4_port_ephemeral(inet->rcv_saddr, inet->daddr,
-					  inet->dport);
+	return secure_ipv4_port_ephemeral(inet->inet_rcv_saddr,
+					  inet->inet_daddr,
+					  inet->inet_dport);
 }
 
 void __inet_hash_nolisten(struct sock *sk)
@@ -424,7 +426,7 @@
 		void (*hash)(struct sock *sk))
 {
 	struct inet_hashinfo *hinfo = death_row->hashinfo;
-	const unsigned short snum = inet_sk(sk)->num;
+	const unsigned short snum = inet_sk(sk)->inet_num;
 	struct inet_bind_hashbucket *head;
 	struct inet_bind_bucket *tb;
 	int ret;
@@ -485,7 +487,7 @@
 		/* Head lock still held and bh's disabled */
 		inet_bind_hash(sk, tb, port);
 		if (sk_unhashed(sk)) {
-			inet_sk(sk)->sport = htons(port);
+			inet_sk(sk)->inet_sport = htons(port);
 			hash(sk);
 		}
 		spin_unlock(&head->lock);
diff --git a/net/ipv4/inet_timewait_sock.c b/net/ipv4/inet_timewait_sock.c
index 13f0781..1f5d508 100644
--- a/net/ipv4/inet_timewait_sock.c
+++ b/net/ipv4/inet_timewait_sock.c
@@ -86,7 +86,7 @@
 	   Note, that any socket with inet->num != 0 MUST be bound in
 	   binding cache, even if it is closed.
 	 */
-	bhead = &hashinfo->bhash[inet_bhashfn(twsk_net(tw), inet->num,
+	bhead = &hashinfo->bhash[inet_bhashfn(twsk_net(tw), inet->inet_num,
 			hashinfo->bhash_size)];
 	spin_lock(&bhead->lock);
 	tw->tw_tb = icsk->icsk_bind_hash;
@@ -124,14 +124,14 @@
 		kmemcheck_annotate_bitfield(tw, flags);
 
 		/* Give us an identity. */
-		tw->tw_daddr	    = inet->daddr;
-		tw->tw_rcv_saddr    = inet->rcv_saddr;
+		tw->tw_daddr	    = inet->inet_daddr;
+		tw->tw_rcv_saddr    = inet->inet_rcv_saddr;
 		tw->tw_bound_dev_if = sk->sk_bound_dev_if;
-		tw->tw_num	    = inet->num;
+		tw->tw_num	    = inet->inet_num;
 		tw->tw_state	    = TCP_TIME_WAIT;
 		tw->tw_substate	    = state;
-		tw->tw_sport	    = inet->sport;
-		tw->tw_dport	    = inet->dport;
+		tw->tw_sport	    = inet->inet_sport;
+		tw->tw_dport	    = inet->inet_dport;
 		tw->tw_family	    = sk->sk_family;
 		tw->tw_reuse	    = sk->sk_reuse;
 		tw->tw_hash	    = sk->sk_hash;
@@ -430,7 +430,7 @@
 	int h;
 
 	local_bh_disable();
-	for (h = 0; h < (hashinfo->ehash_size); h++) {
+	for (h = 0; h <= hashinfo->ehash_mask; h++) {
 		struct inet_ehash_bucket *head =
 			inet_ehash_bucket(hashinfo, h);
 		spinlock_t *lock = inet_ehash_lockp(hashinfo, h);
diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c
index 575f9bd..b007f8a 100644
--- a/net/ipv4/ip_fragment.c
+++ b/net/ipv4/ip_fragment.c
@@ -206,10 +206,11 @@
 		struct sk_buff *head = qp->q.fragments;
 
 		/* Send an ICMP "Fragment Reassembly Timeout" message. */
-		if ((head->dev = dev_get_by_index(net, qp->iif)) != NULL) {
+		rcu_read_lock();
+		head->dev = dev_get_by_index_rcu(net, qp->iif);
+		if (head->dev)
 			icmp_send(head, ICMP_TIME_EXCEEDED, ICMP_EXC_FRAGTIME, 0);
-			dev_put(head->dev);
-		}
+		rcu_read_unlock();
 	}
 out:
 	spin_unlock(&qp->q.lock);
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 1433338..71a3242 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -156,8 +156,13 @@
 #define tunnels_r	tunnels[2]
 #define tunnels_l	tunnels[1]
 #define tunnels_wc	tunnels[0]
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipgre_lock);
 
-static DEFINE_RWLOCK(ipgre_lock);
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
 
 /* Given src, dst and key, find appropriate for input tunnel. */
 
@@ -175,7 +180,7 @@
 		       ARPHRD_ETHER : ARPHRD_IPGRE;
 	int score, cand_score = 4;
 
-	for (t = ign->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_r_l[h0 ^ h1]) {
 		if (local != t->parms.iph.saddr ||
 		    remote != t->parms.iph.daddr ||
 		    key != t->parms.i_key ||
@@ -200,7 +205,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_r[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_r[h0 ^ h1]) {
 		if (remote != t->parms.iph.daddr ||
 		    key != t->parms.i_key ||
 		    !(t->dev->flags & IFF_UP))
@@ -224,7 +229,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_l[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_l[h1]) {
 		if ((local != t->parms.iph.saddr &&
 		     (local != t->parms.iph.daddr ||
 		      !ipv4_is_multicast(local))) ||
@@ -250,7 +255,7 @@
 		}
 	}
 
-	for (t = ign->tunnels_wc[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ign->tunnels_wc[h1]) {
 		if (t->parms.i_key != key ||
 		    !(t->dev->flags & IFF_UP))
 			continue;
@@ -276,8 +281,9 @@
 	if (cand != NULL)
 		return cand;
 
-	if (ign->fb_tunnel_dev->flags & IFF_UP)
-		return netdev_priv(ign->fb_tunnel_dev);
+	dev = ign->fb_tunnel_dev;
+	if (dev->flags & IFF_UP)
+		return netdev_priv(dev);
 
 	return NULL;
 }
@@ -311,10 +317,10 @@
 {
 	struct ip_tunnel **tp = ipgre_bucket(ign, t);
 
+	spin_lock_bh(&ipgre_lock);
 	t->next = *tp;
-	write_lock_bh(&ipgre_lock);
-	*tp = t;
-	write_unlock_bh(&ipgre_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipgre_lock);
 }
 
 static void ipgre_tunnel_unlink(struct ipgre_net *ign, struct ip_tunnel *t)
@@ -323,9 +329,9 @@
 
 	for (tp = ipgre_bucket(ign, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipgre_lock);
+			spin_lock_bh(&ipgre_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipgre_lock);
+			spin_unlock_bh(&ipgre_lock);
 			break;
 		}
 	}
@@ -476,7 +482,7 @@
 		break;
 	}
 
-	read_lock(&ipgre_lock);
+	rcu_read_lock();
 	t = ipgre_tunnel_lookup(skb->dev, iph->daddr, iph->saddr,
 				flags & GRE_KEY ?
 				*(((__be32 *)p) + (grehlen / 4) - 1) : 0,
@@ -494,7 +500,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipgre_lock);
+	rcu_read_unlock();
 	return;
 }
 
@@ -573,7 +579,7 @@
 
 	gre_proto = *(__be16 *)(h + 2);
 
-	read_lock(&ipgre_lock);
+	rcu_read_lock();
 	if ((tunnel = ipgre_tunnel_lookup(skb->dev,
 					  iph->saddr, iph->daddr, key,
 					  gre_proto))) {
@@ -647,13 +653,13 @@
 		ipgre_ecn_decapsulate(iph, skb);
 
 		netif_rx(skb);
-		read_unlock(&ipgre_lock);
+		rcu_read_unlock();
 		return(0);
 	}
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
 
 drop:
-	read_unlock(&ipgre_lock);
+	rcu_read_unlock();
 drop_nolock:
 	kfree_skb(skb);
 	return(0);
@@ -662,7 +668,8 @@
 static netdev_tx_t ipgre_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *old_iph = ip_hdr(skb);
 	struct iphdr  *tiph;
 	u8     tos;
@@ -810,7 +817,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -1283,16 +1290,19 @@
 	.netns_ok	=	1,
 };
 
-static void ipgre_destroy_tunnels(struct ipgre_net *ign)
+static void ipgre_destroy_tunnels(struct ipgre_net *ign, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 0; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = ign->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = ign->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
@@ -1340,10 +1350,12 @@
 static void ipgre_exit_net(struct net *net)
 {
 	struct ipgre_net *ign;
+	LIST_HEAD(list);
 
 	ign = net_generic(net, ipgre_net_id);
 	rtnl_lock();
-	ipgre_destroy_tunnels(ign);
+	ipgre_destroy_tunnels(ign, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
 	kfree(ign);
 }
diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c
index 6c98b43..fdf51ba 100644
--- a/net/ipv4/ip_input.c
+++ b/net/ipv4/ip_input.c
@@ -161,7 +161,7 @@
 		/* If socket is bound to an interface, only report
 		 * the packet if it came  from that interface.
 		 */
-		if (sk && inet_sk(sk)->num == protocol &&
+		if (sk && inet_sk(sk)->inet_num == protocol &&
 		    (!sk->sk_bound_dev_if ||
 		     sk->sk_bound_dev_if == dev->ifindex) &&
 		    sock_net(sk) == dev_net(dev)) {
diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c
index f989518..322b408 100644
--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -329,7 +329,7 @@
 		__be32 daddr;
 
 		/* Use correct destination address if we have options. */
-		daddr = inet->daddr;
+		daddr = inet->inet_daddr;
 		if(opt && opt->srr)
 			daddr = opt->faddr;
 
@@ -338,13 +338,13 @@
 					    .mark = sk->sk_mark,
 					    .nl_u = { .ip4_u =
 						      { .daddr = daddr,
-							.saddr = inet->saddr,
+							.saddr = inet->inet_saddr,
 							.tos = RT_CONN_FLAGS(sk) } },
 					    .proto = sk->sk_protocol,
 					    .flags = inet_sk_flowi_flags(sk),
 					    .uli_u = { .ports =
-						       { .sport = inet->sport,
-							 .dport = inet->dport } } };
+						       { .sport = inet->inet_sport,
+							 .dport = inet->inet_dport } } };
 
 			/* If this fails, retransmit mechanism of transport layer will
 			 * keep trying until route appears or the connection times
@@ -379,7 +379,7 @@
 
 	if (opt && opt->optlen) {
 		iph->ihl += opt->optlen >> 2;
-		ip_options_build(skb, opt, inet->daddr, rt, 0);
+		ip_options_build(skb, opt, inet->inet_daddr, rt, 0);
 	}
 
 	ip_select_ident_more(iph, &rt->u.dst, sk,
@@ -846,7 +846,8 @@
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
 	if (inet->cork.length + length > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport, mtu-exthdrlen);
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
+			       mtu-exthdrlen);
 		return -EMSGSIZE;
 	}
 
@@ -1100,7 +1101,7 @@
 	maxfraglen = ((mtu - fragheaderlen) & ~7) + fragheaderlen;
 
 	if (inet->cork.length + size > 0xFFFF - fragheaderlen) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport, mtu);
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport, mtu);
 		return -EMSGSIZE;
 	}
 
diff --git a/net/ipv4/ip_sockglue.c b/net/ipv4/ip_sockglue.c
index e982b5c..cafad9b 100644
--- a/net/ipv4/ip_sockglue.c
+++ b/net/ipv4/ip_sockglue.c
@@ -245,7 +245,7 @@
 {
 	struct ip_ra_chain *ra, *new_ra, **rap;
 
-	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num == IPPROTO_RAW)
+	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->inet_num == IPPROTO_RAW)
 		return -EINVAL;
 
 	new_ra = on ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -480,7 +480,7 @@
 	case IP_OPTIONS:
 	{
 		struct ip_options *opt = NULL;
-		if (optlen > 40 || optlen < 0)
+		if (optlen > 40)
 			goto e_inval;
 		err = ip_options_get_from_user(sock_net(sk), &opt,
 					       optval, optlen);
@@ -492,7 +492,7 @@
 			if (sk->sk_family == PF_INET ||
 			    (!((1 << sk->sk_state) &
 			       (TCPF_LISTEN | TCPF_CLOSE)) &&
-			     inet->daddr != LOOPBACK4_IPV6)) {
+			     inet->inet_daddr != LOOPBACK4_IPV6)) {
 #endif
 				if (inet->opt)
 					icsk->icsk_ext_hdr_len -= inet->opt->optlen;
@@ -575,7 +575,7 @@
 		inet->hdrincl = val ? 1 : 0;
 		break;
 	case IP_MTU_DISCOVER:
-		if (val < 0 || val > 3)
+		if (val < IP_PMTUDISC_DONT || val > IP_PMTUDISC_PROBE)
 			goto e_inval;
 		inet->pmtudisc = val;
 		break;
@@ -1180,8 +1180,8 @@
 		if (inet->cmsg_flags & IP_CMSG_PKTINFO) {
 			struct in_pktinfo info;
 
-			info.ipi_addr.s_addr = inet->rcv_saddr;
-			info.ipi_spec_dst.s_addr = inet->rcv_saddr;
+			info.ipi_addr.s_addr = inet->inet_rcv_saddr;
+			info.ipi_spec_dst.s_addr = inet->inet_rcv_saddr;
 			info.ipi_ifindex = inet->mc_index;
 			put_cmsg(&msg, SOL_IP, IP_PKTINFO, sizeof(info), &info);
 		}
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 08ccd34..a2ca53d 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -134,7 +134,13 @@
 static void ipip_tunnel_init(struct net_device *dev);
 static void ipip_tunnel_setup(struct net_device *dev);
 
-static DEFINE_RWLOCK(ipip_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipip_lock);
+
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
 
 static struct ip_tunnel * ipip_tunnel_lookup(struct net *net,
 		__be32 remote, __be32 local)
@@ -144,20 +150,21 @@
 	struct ip_tunnel *t;
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 
-	for (t = ipn->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(ipn->tunnels_r_l[h0 ^ h1])
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	for (t = ipn->tunnels_r[h0]; t; t = t->next) {
+
+	for_each_ip_tunnel_rcu(ipn->tunnels_r[h0])
 		if (remote == t->parms.iph.daddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	for (t = ipn->tunnels_l[h1]; t; t = t->next) {
+
+	for_each_ip_tunnel_rcu(ipn->tunnels_l[h1])
 		if (local == t->parms.iph.saddr && (t->dev->flags&IFF_UP))
 			return t;
-	}
-	if ((t = ipn->tunnels_wc[0]) != NULL && (t->dev->flags&IFF_UP))
+
+	t = rcu_dereference(ipn->tunnels_wc[0]);
+	if (t && (t->dev->flags&IFF_UP))
 		return t;
 	return NULL;
 }
@@ -193,9 +200,9 @@
 
 	for (tp = ipip_bucket(ipn, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipip_lock);
+			spin_lock_bh(&ipip_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipip_lock);
+			spin_unlock_bh(&ipip_lock);
 			break;
 		}
 	}
@@ -205,10 +212,10 @@
 {
 	struct ip_tunnel **tp = ipip_bucket(ipn, t);
 
+	spin_lock_bh(&ipip_lock);
 	t->next = *tp;
-	write_lock_bh(&ipip_lock);
-	*tp = t;
-	write_unlock_bh(&ipip_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipip_lock);
 }
 
 static struct ip_tunnel * ipip_tunnel_locate(struct net *net,
@@ -267,9 +274,9 @@
 	struct ipip_net *ipn = net_generic(net, ipip_net_id);
 
 	if (dev == ipn->fb_tunnel_dev) {
-		write_lock_bh(&ipip_lock);
+		spin_lock_bh(&ipip_lock);
 		ipn->tunnels_wc[0] = NULL;
-		write_unlock_bh(&ipip_lock);
+		spin_unlock_bh(&ipip_lock);
 	} else
 		ipip_tunnel_unlink(ipn, netdev_priv(dev));
 	dev_put(dev);
@@ -318,7 +325,7 @@
 
 	err = -ENOENT;
 
-	read_lock(&ipip_lock);
+	rcu_read_lock();
 	t = ipip_tunnel_lookup(dev_net(skb->dev), iph->daddr, iph->saddr);
 	if (t == NULL || t->parms.iph.daddr == 0)
 		goto out;
@@ -333,7 +340,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipip_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -351,11 +358,11 @@
 	struct ip_tunnel *tunnel;
 	const struct iphdr *iph = ip_hdr(skb);
 
-	read_lock(&ipip_lock);
+	rcu_read_lock();
 	if ((tunnel = ipip_tunnel_lookup(dev_net(skb->dev),
 					iph->saddr, iph->daddr)) != NULL) {
 		if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) {
-			read_unlock(&ipip_lock);
+			rcu_read_unlock();
 			kfree_skb(skb);
 			return 0;
 		}
@@ -374,10 +381,10 @@
 		nf_reset(skb);
 		ipip_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
-		read_unlock(&ipip_lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	read_unlock(&ipip_lock);
+	rcu_read_unlock();
 
 	return -1;
 }
@@ -390,7 +397,8 @@
 static netdev_tx_t ipip_tunnel_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *tiph = &tunnel->parms.iph;
 	u8     tos = tunnel->parms.iph.tos;
 	__be16 df = tiph->frag_off;
@@ -478,7 +486,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -746,16 +754,19 @@
 static const char banner[] __initconst =
 	KERN_INFO "IPv4 over IPv4 tunneling driver\n";
 
-static void ipip_destroy_tunnels(struct ipip_net *ipn)
+static void ipip_destroy_tunnels(struct ipip_net *ipn, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 1; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = ipn->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = ipn->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
@@ -808,11 +819,13 @@
 static void ipip_exit_net(struct net *net)
 {
 	struct ipip_net *ipn;
+	LIST_HEAD(list);
 
 	ipn = net_generic(net, ipip_net_id);
 	rtnl_lock();
-	ipip_destroy_tunnels(ipn);
-	unregister_netdevice(ipn->fb_tunnel_dev);
+	ipip_destroy_tunnels(ipn, &list);
+	unregister_netdevice_queue(ipn->fb_tunnel_dev, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
 	kfree(ipn);
 }
diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c
index 630a56d..ef4ee45 100644
--- a/net/ipv4/ipmr.c
+++ b/net/ipv4/ipmr.c
@@ -275,7 +275,8 @@
  *	@notify: Set to 1, if the caller is a notifier_call
  */
 
-static int vif_delete(struct net *net, int vifi, int notify)
+static int vif_delete(struct net *net, int vifi, int notify,
+		      struct list_head *head)
 {
 	struct vif_device *v;
 	struct net_device *dev;
@@ -319,7 +320,7 @@
 	}
 
 	if (v->flags&(VIFF_TUNNEL|VIFF_REGISTER) && !notify)
-		unregister_netdevice(dev);
+		unregister_netdevice_queue(dev, head);
 
 	dev_put(dev);
 	return 0;
@@ -469,8 +470,18 @@
 			return err;
 		}
 		break;
+
+	case VIFF_USE_IFINDEX:
 	case 0:
-		dev = ip_dev_find(net, vifc->vifc_lcl_addr.s_addr);
+		if (vifc->vifc_flags == VIFF_USE_IFINDEX) {
+			dev = dev_get_by_index(net, vifc->vifc_lcl_ifindex);
+			if (dev && dev->ip_ptr == NULL) {
+				dev_put(dev);
+				return -EADDRNOTAVAIL;
+			}
+		} else
+			dev = ip_dev_find(net, vifc->vifc_lcl_addr.s_addr);
+
 		if (!dev)
 			return -EADDRNOTAVAIL;
 		err = dev_set_allmulti(dev, 1);
@@ -860,14 +871,16 @@
 static void mroute_clean_tables(struct net *net)
 {
 	int i;
+	LIST_HEAD(list);
 
 	/*
 	 *	Shut down all active vif entries
 	 */
 	for (i = 0; i < net->ipv4.maxvif; i++) {
 		if (!(net->ipv4.vif_table[i].flags&VIFF_STATIC))
-			vif_delete(net, i, 0);
+			vif_delete(net, i, 0, &list);
 	}
+	unregister_netdevice_many(&list);
 
 	/*
 	 *	Wipe the cache
@@ -946,7 +959,7 @@
 	switch (optname) {
 	case MRT_INIT:
 		if (sk->sk_type != SOCK_RAW ||
-		    inet_sk(sk)->num != IPPROTO_IGMP)
+		    inet_sk(sk)->inet_num != IPPROTO_IGMP)
 			return -EOPNOTSUPP;
 		if (optlen != sizeof(int))
 			return -ENOPROTOOPT;
@@ -983,7 +996,7 @@
 		if (optname == MRT_ADD_VIF) {
 			ret = vif_add(net, &vif, sk == net->ipv4.mroute_sk);
 		} else {
-			ret = vif_delete(net, vif.vifc_vifi, 0);
+			ret = vif_delete(net, vif.vifc_vifi, 0, NULL);
 		}
 		rtnl_unlock();
 		return ret;
@@ -1146,6 +1159,7 @@
 	struct net *net = dev_net(dev);
 	struct vif_device *v;
 	int ct;
+	LIST_HEAD(list);
 
 	if (!net_eq(dev_net(dev), net))
 		return NOTIFY_DONE;
@@ -1155,8 +1169,9 @@
 	v = &net->ipv4.vif_table[0];
 	for (ct = 0; ct < net->ipv4.maxvif; ct++, v++) {
 		if (v->dev == dev)
-			vif_delete(net, ct, 1);
+			vif_delete(net, ct, 1, &list);
 	}
+	unregister_netdevice_many(&list);
 	return NOTIFY_DONE;
 }
 
diff --git a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
index aa95bb8..9cd423f 100644
--- a/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
+++ b/net/ipv4/netfilter/nf_conntrack_l3proto_ipv4.c
@@ -255,10 +255,10 @@
 	struct nf_conntrack_tuple tuple;
 
 	memset(&tuple, 0, sizeof(tuple));
-	tuple.src.u3.ip = inet->rcv_saddr;
-	tuple.src.u.tcp.port = inet->sport;
-	tuple.dst.u3.ip = inet->daddr;
-	tuple.dst.u.tcp.port = inet->dport;
+	tuple.src.u3.ip = inet->inet_rcv_saddr;
+	tuple.src.u.tcp.port = inet->inet_sport;
+	tuple.dst.u3.ip = inet->inet_daddr;
+	tuple.dst.u.tcp.port = inet->inet_dport;
 	tuple.src.l3num = PF_INET;
 	tuple.dst.protonum = sk->sk_protocol;
 
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index ab996f9..ce154b4 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -87,7 +87,7 @@
 	struct raw_hashinfo *h = sk->sk_prot->h.raw_hash;
 	struct hlist_head *head;
 
-	head = &h->ht[inet_sk(sk)->num & (RAW_HTABLE_SIZE - 1)];
+	head = &h->ht[inet_sk(sk)->inet_num & (RAW_HTABLE_SIZE - 1)];
 
 	write_lock_bh(&h->lock);
 	sk_add_node(sk, head);
@@ -115,9 +115,9 @@
 	sk_for_each_from(sk, node) {
 		struct inet_sock *inet = inet_sk(sk);
 
-		if (net_eq(sock_net(sk), net) && inet->num == num	&&
-		    !(inet->daddr && inet->daddr != raddr) 		&&
-		    !(inet->rcv_saddr && inet->rcv_saddr != laddr)	&&
+		if (net_eq(sock_net(sk), net) && inet->inet_num == num	&&
+		    !(inet->inet_daddr && inet->inet_daddr != raddr) 	&&
+		    !(inet->inet_rcv_saddr && inet->inet_rcv_saddr != laddr) &&
 		    !(sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif))
 			goto found; /* gotcha */
 	}
@@ -292,7 +292,6 @@
 	/* Charge it to the socket. */
 
 	if (sock_queue_rcv_skb(sk, skb) < 0) {
-		atomic_inc(&sk->sk_drops);
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
@@ -327,7 +326,7 @@
 	int err;
 
 	if (length > rt->u.dst.dev->mtu) {
-		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->dport,
+		ip_local_error(sk, EMSGSIZE, rt->rt_dst, inet->inet_dport,
 			       rt->u.dst.dev->mtu);
 		return -EMSGSIZE;
 	}
@@ -500,10 +499,10 @@
 		err = -EDESTADDRREQ;
 		if (sk->sk_state != TCP_ESTABLISHED)
 			goto out;
-		daddr = inet->daddr;
+		daddr = inet->inet_daddr;
 	}
 
-	ipc.addr = inet->saddr;
+	ipc.addr = inet->inet_saddr;
 	ipc.opt = NULL;
 	ipc.shtx.flags = 0;
 	ipc.oif = sk->sk_bound_dev_if;
@@ -645,9 +644,9 @@
 	if (addr->sin_addr.s_addr && chk_addr_ret != RTN_LOCAL &&
 	    chk_addr_ret != RTN_MULTICAST && chk_addr_ret != RTN_BROADCAST)
 		goto out;
-	inet->rcv_saddr = inet->saddr = addr->sin_addr.s_addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = addr->sin_addr.s_addr;
 	if (chk_addr_ret == RTN_MULTICAST || chk_addr_ret == RTN_BROADCAST)
-		inet->saddr = 0;  /* Use device */
+		inet->inet_saddr = 0;  /* Use device */
 	sk_dst_reset(sk);
 	ret = 0;
 out:	return ret;
@@ -692,7 +691,7 @@
 	if (err)
 		goto done;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (sin) {
@@ -717,7 +716,7 @@
 {
 	struct raw_sock *rp = raw_sk(sk);
 
-	if (inet_sk(sk)->num == IPPROTO_ICMP)
+	if (inet_sk(sk)->inet_num == IPPROTO_ICMP)
 		memset(&rp->filter, 0, sizeof(rp->filter));
 	return 0;
 }
@@ -754,7 +753,7 @@
 			  char __user *optval, unsigned int optlen)
 {
 	if (optname == ICMP_FILTER) {
-		if (inet_sk(sk)->num != IPPROTO_ICMP)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMP)
 			return -EOPNOTSUPP;
 		else
 			return raw_seticmpfilter(sk, optval, optlen);
@@ -784,7 +783,7 @@
 			  char __user *optval, int __user *optlen)
 {
 	if (optname == ICMP_FILTER) {
-		if (inet_sk(sk)->num != IPPROTO_ICMP)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMP)
 			return -EOPNOTSUPP;
 		else
 			return raw_geticmpfilter(sk, optval, optlen);
@@ -943,10 +942,10 @@
 static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i)
 {
 	struct inet_sock *inet = inet_sk(sp);
-	__be32 dest = inet->daddr,
-	       src = inet->rcv_saddr;
+	__be32 dest = inet->inet_daddr,
+	       src = inet->inet_rcv_saddr;
 	__u16 destp = 0,
-	      srcp  = inet->num;
+	      srcp  = inet->inet_num;
 
 	seq_printf(seq, "%4d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 5b1050a..ff258b5 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -1628,9 +1628,6 @@
 	__be32  daddr = iph->daddr;
 	unsigned short est_mtu = 0;
 
-	if (ipv4_config.no_pmtu_disc)
-		return 0;
-
 	for (k = 0; k < 2; k++) {
 		for (i = 0; i < 2; i++) {
 			unsigned hash = rt_hash(daddr, skeys[i], ikeys[k],
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index a6e0e07..3146cc4 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -276,13 +276,6 @@
 
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESRECV);
 
-	/* check for timestamp cookie support */
-	memset(&tcp_opt, 0, sizeof(tcp_opt));
-	tcp_parse_options(skb, &tcp_opt, 0);
-
-	if (tcp_opt.saw_tstamp)
-		cookie_check_timestamp(&tcp_opt);
-
 	ret = NULL;
 	req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
 	if (!req)
@@ -298,12 +291,6 @@
 	ireq->loc_addr		= ip_hdr(skb)->daddr;
 	ireq->rmt_addr		= ip_hdr(skb)->saddr;
 	ireq->ecn_ok		= 0;
-	ireq->snd_wscale	= tcp_opt.snd_wscale;
-	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
-	ireq->sack_ok		= tcp_opt.sack_ok;
-	ireq->wscale_ok		= tcp_opt.wscale_ok;
-	ireq->tstamp_ok		= tcp_opt.saw_tstamp;
-	req->ts_recent		= tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
 
 	/* We throwed the options of the initial SYN away, so we hope
 	 * the ACK carries the same options again (see RFC1122 4.2.3.8)
@@ -333,7 +320,8 @@
 	 * no easy way to do this.
 	 */
 	{
-		struct flowi fl = { .nl_u = { .ip4_u =
+		struct flowi fl = { .mark = sk->sk_mark,
+				    .nl_u = { .ip4_u =
 					      { .daddr = ((opt && opt->srr) ?
 							  opt->faddr :
 							  ireq->rmt_addr),
@@ -351,6 +339,20 @@
 		}
 	}
 
+	/* check for timestamp cookie support */
+	memset(&tcp_opt, 0, sizeof(tcp_opt));
+	tcp_parse_options(skb, &tcp_opt, 0, &rt->u.dst);
+
+	if (tcp_opt.saw_tstamp)
+		cookie_check_timestamp(&tcp_opt);
+
+	ireq->snd_wscale        = tcp_opt.snd_wscale;
+	ireq->rcv_wscale        = tcp_opt.rcv_wscale;
+	ireq->sack_ok           = tcp_opt.sack_ok;
+	ireq->wscale_ok         = tcp_opt.wscale_ok;
+	ireq->tstamp_ok         = tcp_opt.saw_tstamp;
+	req->ts_recent          = tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
+
 	/* Try to redo what tcp_v4_send_synack did. */
 	req->window_clamp = tp->window_clamp ? :dst_metric(&rt->u.dst, RTAX_WINDOW);
 
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 98440ad..e0cfa63 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -2037,7 +2037,7 @@
 	__skb_queue_purge(&sk->sk_async_wait_queue);
 #endif
 
-	inet->dport = 0;
+	inet->inet_dport = 0;
 
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
@@ -2061,7 +2061,7 @@
 	memset(&tp->rx_opt, 0, sizeof(tp->rx_opt));
 	__sk_dst_reset(sk);
 
-	WARN_ON(inet->num && !icsk->icsk_bind_hash);
+	WARN_ON(inet->inet_num && !icsk->icsk_bind_hash);
 
 	sk->sk_error_report(sk);
 	return err;
@@ -2898,11 +2898,10 @@
 					(totalram_pages >= 128 * 1024) ?
 					13 : 15,
 					0,
-					&tcp_hashinfo.ehash_size,
 					NULL,
+					&tcp_hashinfo.ehash_mask,
 					thash_entries ? 0 : 512 * 1024);
-	tcp_hashinfo.ehash_size = 1 << tcp_hashinfo.ehash_size;
-	for (i = 0; i < tcp_hashinfo.ehash_size; i++) {
+	for (i = 0; i <= tcp_hashinfo.ehash_mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&tcp_hashinfo.ehash[i].chain, i);
 		INIT_HLIST_NULLS_HEAD(&tcp_hashinfo.ehash[i].twchain, i);
 	}
@@ -2911,7 +2910,7 @@
 	tcp_hashinfo.bhash =
 		alloc_large_system_hash("TCP bind",
 					sizeof(struct inet_bind_hashbucket),
-					tcp_hashinfo.ehash_size,
+					tcp_hashinfo.ehash_mask + 1,
 					(totalram_pages >= 128 * 1024) ?
 					13 : 15,
 					0,
@@ -2966,8 +2965,8 @@
 	sysctl_tcp_rmem[2] = max(87380, max_share);
 
 	printk(KERN_INFO "TCP: Hash tables configured "
-	       "(established %d bind %d)\n",
-	       tcp_hashinfo.ehash_size, tcp_hashinfo.bhash_size);
+	       "(established %u bind %u)\n",
+	       tcp_hashinfo.ehash_mask + 1, tcp_hashinfo.bhash_size);
 
 	tcp_register_congestion_control(&tcp_reno);
 }
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index d86784b..be0c5bf 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -2300,7 +2300,7 @@
  * they differ. Since neither occurs due to loss, TCP should really
  * ignore them.
  */
-static inline int tcp_dupack_heurestics(struct tcp_sock *tp)
+static inline int tcp_dupack_heuristics(struct tcp_sock *tp)
 {
 	return tcp_is_fack(tp) ? tp->fackets_out : tp->sacked_out + 1;
 }
@@ -2425,7 +2425,7 @@
 		return 1;
 
 	/* Not-A-Trick#2 : Classic rule... */
-	if (tcp_dupack_heurestics(tp) > tp->reordering)
+	if (tcp_dupack_heuristics(tp) > tp->reordering)
 		return 1;
 
 	/* Trick#3 : when we use RFC2988 timer restart, fast
@@ -3698,7 +3698,7 @@
  * the fast version below fails.
  */
 void tcp_parse_options(struct sk_buff *skb, struct tcp_options_received *opt_rx,
-		       int estab)
+		       int estab,  struct dst_entry *dst)
 {
 	unsigned char *ptr;
 	struct tcphdr *th = tcp_hdr(skb);
@@ -3737,7 +3737,8 @@
 				break;
 			case TCPOPT_WINDOW:
 				if (opsize == TCPOLEN_WINDOW && th->syn &&
-				    !estab && sysctl_tcp_window_scaling) {
+				    !estab && sysctl_tcp_window_scaling &&
+				    !dst_feature(dst, RTAX_FEATURE_NO_WSCALE)) {
 					__u8 snd_wscale = *(__u8 *)ptr;
 					opt_rx->wscale_ok = 1;
 					if (snd_wscale > 14) {
@@ -3753,7 +3754,8 @@
 			case TCPOPT_TIMESTAMP:
 				if ((opsize == TCPOLEN_TIMESTAMP) &&
 				    ((estab && opt_rx->tstamp_ok) ||
-				     (!estab && sysctl_tcp_timestamps))) {
+				     (!estab && sysctl_tcp_timestamps &&
+				      !dst_feature(dst, RTAX_FEATURE_NO_TSTAMP)))) {
 					opt_rx->saw_tstamp = 1;
 					opt_rx->rcv_tsval = get_unaligned_be32(ptr);
 					opt_rx->rcv_tsecr = get_unaligned_be32(ptr + 4);
@@ -3761,7 +3763,8 @@
 				break;
 			case TCPOPT_SACK_PERM:
 				if (opsize == TCPOLEN_SACK_PERM && th->syn &&
-				    !estab && sysctl_tcp_sack) {
+				    !estab && sysctl_tcp_sack &&
+				    !dst_feature(dst, RTAX_FEATURE_NO_SACK)) {
 					opt_rx->sack_ok = 1;
 					tcp_sack_reset(opt_rx);
 				}
@@ -3820,7 +3823,7 @@
 		if (tcp_parse_aligned_timestamp(tp, th))
 			return 1;
 	}
-	tcp_parse_options(skb, &tp->rx_opt, 1);
+	tcp_parse_options(skb, &tp->rx_opt, 1, NULL);
 	return 1;
 }
 
@@ -4075,8 +4078,10 @@
 static void tcp_dsack_set(struct sock *sk, u32 seq, u32 end_seq)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = __sk_dst_get(sk);
 
-	if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
+	if (tcp_is_sack(tp) && sysctl_tcp_dsack &&
+	    !dst_feature(dst, RTAX_FEATURE_NO_DSACK)) {
 		int mib_idx;
 
 		if (before(seq, tp->rcv_nxt))
@@ -4105,13 +4110,15 @@
 static void tcp_send_dupack(struct sock *sk, struct sk_buff *skb)
 {
 	struct tcp_sock *tp = tcp_sk(sk);
+	struct dst_entry *dst = __sk_dst_get(sk);
 
 	if (TCP_SKB_CB(skb)->end_seq != TCP_SKB_CB(skb)->seq &&
 	    before(TCP_SKB_CB(skb)->seq, tp->rcv_nxt)) {
 		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_DELAYEDACKLOST);
 		tcp_enter_quickack_mode(sk);
 
-		if (tcp_is_sack(tp) && sysctl_tcp_dsack) {
+		if (tcp_is_sack(tp) && sysctl_tcp_dsack &&
+		    !dst_feature(dst, RTAX_FEATURE_NO_DSACK)) {
 			u32 end_seq = TCP_SKB_CB(skb)->end_seq;
 
 			if (after(TCP_SKB_CB(skb)->end_seq, tp->rcv_nxt))
@@ -5364,8 +5371,9 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct inet_connection_sock *icsk = inet_csk(sk);
 	int saved_clamp = tp->rx_opt.mss_clamp;
+	struct dst_entry *dst = __sk_dst_get(sk);
 
-	tcp_parse_options(skb, &tp->rx_opt, 0);
+	tcp_parse_options(skb, &tp->rx_opt, 0, dst);
 
 	if (th->ack) {
 		/* rfc793:
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 7cda24b..657ae33 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -165,10 +165,10 @@
 		nexthop = inet->opt->faddr;
 	}
 
-	tmp = ip_route_connect(&rt, nexthop, inet->saddr,
+	tmp = ip_route_connect(&rt, nexthop, inet->inet_saddr,
 			       RT_CONN_FLAGS(sk), sk->sk_bound_dev_if,
 			       IPPROTO_TCP,
-			       inet->sport, usin->sin_port, sk, 1);
+			       inet->inet_sport, usin->sin_port, sk, 1);
 	if (tmp < 0) {
 		if (tmp == -ENETUNREACH)
 			IP_INC_STATS_BH(sock_net(sk), IPSTATS_MIB_OUTNOROUTES);
@@ -183,11 +183,11 @@
 	if (!inet->opt || !inet->opt->srr)
 		daddr = rt->rt_dst;
 
-	if (!inet->saddr)
-		inet->saddr = rt->rt_src;
-	inet->rcv_saddr = inet->saddr;
+	if (!inet->inet_saddr)
+		inet->inet_saddr = rt->rt_src;
+	inet->inet_rcv_saddr = inet->inet_saddr;
 
-	if (tp->rx_opt.ts_recent_stamp && inet->daddr != daddr) {
+	if (tp->rx_opt.ts_recent_stamp && inet->inet_daddr != daddr) {
 		/* Reset inherited state */
 		tp->rx_opt.ts_recent	   = 0;
 		tp->rx_opt.ts_recent_stamp = 0;
@@ -210,8 +210,8 @@
 		}
 	}
 
-	inet->dport = usin->sin_port;
-	inet->daddr = daddr;
+	inet->inet_dport = usin->sin_port;
+	inet->inet_daddr = daddr;
 
 	inet_csk(sk)->icsk_ext_hdr_len = 0;
 	if (inet->opt)
@@ -230,7 +230,7 @@
 		goto failure;
 
 	err = ip_route_newports(&rt, IPPROTO_TCP,
-				inet->sport, inet->dport, sk);
+				inet->inet_sport, inet->inet_dport, sk);
 	if (err)
 		goto failure;
 
@@ -239,12 +239,12 @@
 	sk_setup_caps(sk, &rt->u.dst);
 
 	if (!tp->write_seq)
-		tp->write_seq = secure_tcp_sequence_number(inet->saddr,
-							   inet->daddr,
-							   inet->sport,
+		tp->write_seq = secure_tcp_sequence_number(inet->inet_saddr,
+							   inet->inet_daddr,
+							   inet->inet_sport,
 							   usin->sin_port);
 
-	inet->id = tp->write_seq ^ jiffies;
+	inet->inet_id = tp->write_seq ^ jiffies;
 
 	err = tcp_connect(sk);
 	rt = NULL;
@@ -261,7 +261,7 @@
 	tcp_set_state(sk, TCP_CLOSE);
 	ip_rt_put(rt);
 	sk->sk_route_caps = 0;
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	return err;
 }
 
@@ -520,12 +520,13 @@
 	struct tcphdr *th = tcp_hdr(skb);
 
 	if (skb->ip_summed == CHECKSUM_PARTIAL) {
-		th->check = ~tcp_v4_check(len, inet->saddr,
-					  inet->daddr, 0);
+		th->check = ~tcp_v4_check(len, inet->inet_saddr,
+					  inet->inet_daddr, 0);
 		skb->csum_start = skb_transport_header(skb) - skb->head;
 		skb->csum_offset = offsetof(struct tcphdr, check);
 	} else {
-		th->check = tcp_v4_check(len, inet->saddr, inet->daddr,
+		th->check = tcp_v4_check(len, inet->inet_saddr,
+					 inet->inet_daddr,
 					 csum_partial(th,
 						      th->doff << 2,
 						      skb->csum));
@@ -848,7 +849,7 @@
 struct tcp_md5sig_key *tcp_v4_md5_lookup(struct sock *sk,
 					 struct sock *addr_sk)
 {
-	return tcp_v4_md5_do_lookup(sk, inet_sk(addr_sk)->daddr);
+	return tcp_v4_md5_do_lookup(sk, inet_sk(addr_sk)->inet_daddr);
 }
 
 EXPORT_SYMBOL(tcp_v4_md5_lookup);
@@ -923,7 +924,7 @@
 static int tcp_v4_md5_add_func(struct sock *sk, struct sock *addr_sk,
 			       u8 *newkey, u8 newkeylen)
 {
-	return tcp_v4_md5_do_add(sk, inet_sk(addr_sk)->daddr,
+	return tcp_v4_md5_do_add(sk, inet_sk(addr_sk)->inet_daddr,
 				 newkey, newkeylen);
 }
 
@@ -1089,8 +1090,8 @@
 	__be32 saddr, daddr;
 
 	if (sk) {
-		saddr = inet_sk(sk)->saddr;
-		daddr = inet_sk(sk)->daddr;
+		saddr = inet_sk(sk)->inet_saddr;
+		daddr = inet_sk(sk)->inet_daddr;
 	} else if (req) {
 		saddr = inet_rsk(req)->loc_addr;
 		daddr = inet_rsk(req)->rmt_addr;
@@ -1256,11 +1257,21 @@
 	tcp_rsk(req)->af_specific = &tcp_request_sock_ipv4_ops;
 #endif
 
+	ireq = inet_rsk(req);
+	ireq->loc_addr = daddr;
+	ireq->rmt_addr = saddr;
+	ireq->no_srccheck = inet_sk(sk)->transparent;
+	ireq->opt = tcp_v4_save_options(sk, skb);
+
+	dst = inet_csk_route_req(sk, req);
+	if(!dst)
+		goto drop_and_free;
+
 	tcp_clear_options(&tmp_opt);
 	tmp_opt.mss_clamp = 536;
 	tmp_opt.user_mss  = tcp_sk(sk)->rx_opt.user_mss;
 
-	tcp_parse_options(skb, &tmp_opt, 0);
+	tcp_parse_options(skb, &tmp_opt, 0, dst);
 
 	if (want_cookie && !tmp_opt.saw_tstamp)
 		tcp_clear_options(&tmp_opt);
@@ -1269,14 +1280,8 @@
 
 	tcp_openreq_init(req, &tmp_opt, skb);
 
-	ireq = inet_rsk(req);
-	ireq->loc_addr = daddr;
-	ireq->rmt_addr = saddr;
-	ireq->no_srccheck = inet_sk(sk)->transparent;
-	ireq->opt = tcp_v4_save_options(sk, skb);
-
 	if (security_inet_conn_request(sk, skb, req))
-		goto drop_and_free;
+		goto drop_and_release;
 
 	if (!want_cookie)
 		TCP_ECN_create_request(req, tcp_hdr(skb));
@@ -1301,7 +1306,6 @@
 		 */
 		if (tmp_opt.saw_tstamp &&
 		    tcp_death_row.sysctl_tw_recycle &&
-		    (dst = inet_csk_route_req(sk, req)) != NULL &&
 		    (peer = rt_get_peer((struct rtable *)dst)) != NULL &&
 		    peer->v4daddr == saddr) {
 			if (get_seconds() < peer->tcp_ts_stamp + TCP_PAWS_MSL &&
@@ -1380,9 +1384,9 @@
 	newtp		      = tcp_sk(newsk);
 	newinet		      = inet_sk(newsk);
 	ireq		      = inet_rsk(req);
-	newinet->daddr	      = ireq->rmt_addr;
-	newinet->rcv_saddr    = ireq->loc_addr;
-	newinet->saddr	      = ireq->loc_addr;
+	newinet->inet_daddr   = ireq->rmt_addr;
+	newinet->inet_rcv_saddr = ireq->loc_addr;
+	newinet->inet_saddr	      = ireq->loc_addr;
 	newinet->opt	      = ireq->opt;
 	ireq->opt	      = NULL;
 	newinet->mc_index     = inet_iif(skb);
@@ -1390,7 +1394,7 @@
 	inet_csk(newsk)->icsk_ext_hdr_len = 0;
 	if (newinet->opt)
 		inet_csk(newsk)->icsk_ext_hdr_len = newinet->opt->optlen;
-	newinet->id = newtp->write_seq ^ jiffies;
+	newinet->inet_id = newtp->write_seq ^ jiffies;
 
 	tcp_mtup_init(newsk);
 	tcp_sync_mss(newsk, dst_mtu(dst));
@@ -1403,7 +1407,8 @@
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Copy over the MD5 key from the original socket */
-	if ((key = tcp_v4_md5_do_lookup(sk, newinet->daddr)) != NULL) {
+	key = tcp_v4_md5_do_lookup(sk, newinet->inet_daddr);
+	if (key != NULL) {
 		/*
 		 * We're using one, so create a matching key
 		 * on the newsk structure. If we fail to get
@@ -1412,7 +1417,7 @@
 		 */
 		char *newkey = kmemdup(key->key, key->keylen, GFP_ATOMIC);
 		if (newkey != NULL)
-			tcp_v4_md5_do_add(newsk, newinet->daddr,
+			tcp_v4_md5_do_add(newsk, newinet->inet_daddr,
 					  newkey, key->keylen);
 		newsk->sk_route_caps &= ~NETIF_F_GSO_MASK;
 	}
@@ -1711,8 +1716,8 @@
 	struct inet_peer *peer = NULL;
 	int release_it = 0;
 
-	if (!rt || rt->rt_dst != inet->daddr) {
-		peer = inet_getpeer(inet->daddr, 1);
+	if (!rt || rt->rt_dst != inet->inet_daddr) {
+		peer = inet_getpeer(inet->inet_daddr, 1);
 		release_it = 1;
 	} else {
 		if (!rt->peer)
@@ -2000,7 +2005,7 @@
 	struct net *net = seq_file_net(seq);
 	void *rc = NULL;
 
-	for (st->bucket = 0; st->bucket < tcp_hashinfo.ehash_size; ++st->bucket) {
+	for (st->bucket = 0; st->bucket <= tcp_hashinfo.ehash_mask; ++st->bucket) {
 		struct sock *sk;
 		struct hlist_nulls_node *node;
 		struct inet_timewait_sock *tw;
@@ -2061,10 +2066,10 @@
 		st->state = TCP_SEQ_STATE_ESTABLISHED;
 
 		/* Look for next non empty bucket */
-		while (++st->bucket < tcp_hashinfo.ehash_size &&
+		while (++st->bucket <= tcp_hashinfo.ehash_mask &&
 				empty_bucket(st))
 			;
-		if (st->bucket >= tcp_hashinfo.ehash_size)
+		if (st->bucket > tcp_hashinfo.ehash_mask)
 			return NULL;
 
 		spin_lock_bh(inet_ehash_lockp(&tcp_hashinfo, st->bucket));
@@ -2225,7 +2230,7 @@
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %u %d %p%n",
 		i,
 		ireq->loc_addr,
-		ntohs(inet_sk(sk)->sport),
+		ntohs(inet_sk(sk)->inet_sport),
 		ireq->rmt_addr,
 		ntohs(ireq->rmt_port),
 		TCP_SYN_RECV,
@@ -2248,10 +2253,10 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 	const struct inet_connection_sock *icsk = inet_csk(sk);
 	struct inet_sock *inet = inet_sk(sk);
-	__be32 dest = inet->daddr;
-	__be32 src = inet->rcv_saddr;
-	__u16 destp = ntohs(inet->dport);
-	__u16 srcp = ntohs(inet->sport);
+	__be32 dest = inet->inet_daddr;
+	__be32 src = inet->inet_rcv_saddr;
+	__u16 destp = ntohs(inet->inet_dport);
+	__u16 srcp = ntohs(inet->inet_sport);
 
 	if (icsk->icsk_pending == ICSK_TIME_RETRANS) {
 		timer_active	= 1;
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 4c03598..a9d34e2 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -100,9 +100,9 @@
 	struct tcp_options_received tmp_opt;
 	int paws_reject = 0;
 
-	tmp_opt.saw_tstamp = 0;
 	if (th->doff > (sizeof(*th) >> 2) && tcptw->tw_ts_recent_stamp) {
-		tcp_parse_options(skb, &tmp_opt, 0);
+		tmp_opt.tstamp_ok = 1;
+		tcp_parse_options(skb, &tmp_opt, 1, NULL);
 
 		if (tmp_opt.saw_tstamp) {
 			tmp_opt.ts_recent	= tcptw->tw_ts_recent;
@@ -501,9 +501,9 @@
 	struct tcp_options_received tmp_opt;
 	struct sock *child;
 
-	tmp_opt.saw_tstamp = 0;
-	if (th->doff > (sizeof(struct tcphdr)>>2)) {
-		tcp_parse_options(skb, &tmp_opt, 0);
+	if ((th->doff > (sizeof(struct tcphdr)>>2)) && (req->ts_recent)) {
+		tmp_opt.tstamp_ok = 1;
+		tcp_parse_options(skb, &tmp_opt, 1, NULL);
 
 		if (tmp_opt.saw_tstamp) {
 			tmp_opt.ts_recent = req->ts_recent;
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index fcd278a..616c686 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -464,6 +464,7 @@
 				struct tcp_md5sig_key **md5) {
 	struct tcp_sock *tp = tcp_sk(sk);
 	unsigned size = 0;
+	struct dst_entry *dst = __sk_dst_get(sk);
 
 #ifdef CONFIG_TCP_MD5SIG
 	*md5 = tp->af_specific->md5_lookup(sk, sk);
@@ -487,18 +488,22 @@
 	opts->mss = tcp_advertise_mss(sk);
 	size += TCPOLEN_MSS_ALIGNED;
 
-	if (likely(sysctl_tcp_timestamps && *md5 == NULL)) {
+	if (likely(sysctl_tcp_timestamps &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_TSTAMP) &&
+		   *md5 == NULL)) {
 		opts->options |= OPTION_TS;
 		opts->tsval = TCP_SKB_CB(skb)->when;
 		opts->tsecr = tp->rx_opt.ts_recent;
 		size += TCPOLEN_TSTAMP_ALIGNED;
 	}
-	if (likely(sysctl_tcp_window_scaling)) {
+	if (likely(sysctl_tcp_window_scaling &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_WSCALE))) {
 		opts->ws = tp->rx_opt.rcv_wscale;
 		opts->options |= OPTION_WSCALE;
 		size += TCPOLEN_WSCALE_ALIGNED;
 	}
-	if (likely(sysctl_tcp_sack)) {
+	if (likely(sysctl_tcp_sack &&
+		   !dst_feature(dst, RTAX_FEATURE_NO_SACK))) {
 		opts->options |= OPTION_SACK_ADVERTISE;
 		if (unlikely(!(OPTION_TS & opts->options)))
 			size += TCPOLEN_SACKPERM_ALIGNED;
@@ -661,8 +666,8 @@
 
 	/* Build TCP header and checksum it. */
 	th = tcp_hdr(skb);
-	th->source		= inet->sport;
-	th->dest		= inet->dport;
+	th->source		= inet->inet_sport;
+	th->dest		= inet->inet_dport;
 	th->seq			= htonl(tcb->seq);
 	th->ack_seq		= htonl(tp->rcv_nxt);
 	*(((__be16 *)th) + 6)	= htons(((tcp_header_size >> 2) << 12) |
@@ -2315,7 +2320,9 @@
 	 * See tcp_input.c:tcp_rcv_state_process case TCP_SYN_SENT.
 	 */
 	tp->tcp_header_len = sizeof(struct tcphdr) +
-		(sysctl_tcp_timestamps ? TCPOLEN_TSTAMP_ALIGNED : 0);
+		(sysctl_tcp_timestamps &&
+		(!dst_feature(dst, RTAX_FEATURE_NO_TSTAMP) ?
+		  TCPOLEN_TSTAMP_ALIGNED : 0));
 
 #ifdef CONFIG_TCP_MD5SIG
 	if (tp->af_specific->md5_lookup(sk, sk) != NULL)
@@ -2341,7 +2348,8 @@
 				  tp->advmss - (tp->rx_opt.ts_recent_stamp ? tp->tcp_header_len - sizeof(struct tcphdr) : 0),
 				  &tp->rcv_wnd,
 				  &tp->window_clamp,
-				  sysctl_tcp_window_scaling,
+				  (sysctl_tcp_window_scaling &&
+				   !dst_feature(dst, RTAX_FEATURE_NO_WSCALE)),
 				  &rcv_wscale);
 
 	tp->rx_opt.rcv_wscale = rcv_wscale;
diff --git a/net/ipv4/tcp_probe.c b/net/ipv4/tcp_probe.c
index 59f5b5e..7a3cc2f 100644
--- a/net/ipv4/tcp_probe.c
+++ b/net/ipv4/tcp_probe.c
@@ -94,7 +94,8 @@
 	const struct inet_sock *inet = inet_sk(sk);
 
 	/* Only update if port matches */
-	if ((port == 0 || ntohs(inet->dport) == port || ntohs(inet->sport) == port)
+	if ((port == 0 || ntohs(inet->inet_dport) == port ||
+	     ntohs(inet->inet_sport) == port)
 	    && (full || tp->snd_cwnd != tcp_probe.lastcwnd)) {
 
 		spin_lock(&tcp_probe.lock);
@@ -103,10 +104,10 @@
 			struct tcp_log *p = tcp_probe.log + tcp_probe.head;
 
 			p->tstamp = ktime_get();
-			p->saddr = inet->saddr;
-			p->sport = inet->sport;
-			p->daddr = inet->daddr;
-			p->dport = inet->dport;
+			p->saddr = inet->inet_saddr;
+			p->sport = inet->inet_sport;
+			p->daddr = inet->inet_daddr;
+			p->dport = inet->inet_dport;
 			p->length = skb->len;
 			p->snd_nxt = tp->snd_nxt;
 			p->snd_una = tp->snd_una;
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index cdb2ca7..8353a53 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -141,14 +141,14 @@
 
 	if ((1 << sk->sk_state) & (TCPF_SYN_SENT | TCPF_SYN_RECV)) {
 		if (icsk->icsk_retransmits)
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		retry_until = icsk->icsk_syn_retries ? : sysctl_tcp_syn_retries;
 	} else {
 		if (retransmits_timed_out(sk, sysctl_tcp_retries1)) {
 			/* Black hole detection */
 			tcp_mtu_probing(icsk, sk);
 
-			dst_negative_advice(&sk->sk_dst_cache);
+			dst_negative_advice(&sk->sk_dst_cache, sk);
 		}
 
 		retry_until = sysctl_tcp_retries2;
@@ -303,15 +303,15 @@
 		struct inet_sock *inet = inet_sk(sk);
 		if (sk->sk_family == AF_INET) {
 			LIMIT_NETDEBUG(KERN_DEBUG "TCP: Peer %pI4:%u/%u unexpectedly shrunk window %u:%u (repaired)\n",
-			       &inet->daddr, ntohs(inet->dport),
-			       inet->num, tp->snd_una, tp->snd_nxt);
+			       &inet->inet_daddr, ntohs(inet->inet_dport),
+			       inet->inet_num, tp->snd_una, tp->snd_nxt);
 		}
 #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
 		else if (sk->sk_family == AF_INET6) {
 			struct ipv6_pinfo *np = inet6_sk(sk);
 			LIMIT_NETDEBUG(KERN_DEBUG "TCP: Peer %pI6:%u/%u unexpectedly shrunk window %u:%u (repaired)\n",
-			       &np->daddr, ntohs(inet->dport),
-			       inet->num, tp->snd_una, tp->snd_nxt);
+			       &np->daddr, ntohs(inet->inet_dport),
+			       inet->inet_num, tp->snd_una, tp->snd_nxt);
 		}
 #endif
 #endif
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index 0fa9f70..d5e75e9 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -106,7 +106,7 @@
 #include <net/xfrm.h>
 #include "udp_impl.h"
 
-struct udp_table udp_table;
+struct udp_table udp_table __read_mostly;
 EXPORT_SYMBOL(udp_table);
 
 int sysctl_udp_mem[3] __read_mostly;
@@ -121,14 +121,16 @@
 atomic_t udp_memory_allocated;
 EXPORT_SYMBOL(udp_memory_allocated);
 
-#define PORTS_PER_CHAIN (65536 / UDP_HTABLE_SIZE)
+#define MAX_UDP_PORTS 65536
+#define PORTS_PER_CHAIN (MAX_UDP_PORTS / UDP_HTABLE_SIZE_MIN)
 
 static int udp_lib_lport_inuse(struct net *net, __u16 num,
 			       const struct udp_hslot *hslot,
 			       unsigned long *bitmap,
 			       struct sock *sk,
 			       int (*saddr_comp)(const struct sock *sk1,
-						 const struct sock *sk2))
+						 const struct sock *sk2),
+			       unsigned int log)
 {
 	struct sock *sk2;
 	struct hlist_nulls_node *node;
@@ -142,8 +144,7 @@
 			|| sk2->sk_bound_dev_if == sk->sk_bound_dev_if) &&
 		    (*saddr_comp)(sk, sk2)) {
 			if (bitmap)
-				__set_bit(sk2->sk_hash / UDP_HTABLE_SIZE,
-					  bitmap);
+				__set_bit(sk2->sk_hash >> log, bitmap);
 			else
 				return 1;
 		}
@@ -180,13 +181,15 @@
 		/*
 		 * force rand to be an odd multiple of UDP_HTABLE_SIZE
 		 */
-		rand = (rand | 1) * UDP_HTABLE_SIZE;
-		for (last = first + UDP_HTABLE_SIZE; first != last; first++) {
-			hslot = &udptable->hash[udp_hashfn(net, first)];
+		rand = (rand | 1) * (udptable->mask + 1);
+		for (last = first + udptable->mask + 1;
+		     first != last;
+		     first++) {
+			hslot = udp_hashslot(udptable, net, first);
 			bitmap_zero(bitmap, PORTS_PER_CHAIN);
 			spin_lock_bh(&hslot->lock);
 			udp_lib_lport_inuse(net, snum, hslot, bitmap, sk,
-					    saddr_comp);
+					    saddr_comp, udptable->log);
 
 			snum = first;
 			/*
@@ -196,7 +199,7 @@
 			 */
 			do {
 				if (low <= snum && snum <= high &&
-				    !test_bit(snum / UDP_HTABLE_SIZE, bitmap))
+				    !test_bit(snum >> udptable->log, bitmap))
 					goto found;
 				snum += rand;
 			} while (snum != first);
@@ -204,13 +207,14 @@
 		}
 		goto fail;
 	} else {
-		hslot = &udptable->hash[udp_hashfn(net, snum)];
+		hslot = udp_hashslot(udptable, net, snum);
 		spin_lock_bh(&hslot->lock);
-		if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk, saddr_comp))
+		if (udp_lib_lport_inuse(net, snum, hslot, NULL, sk,
+					saddr_comp, 0))
 			goto fail_unlock;
 	}
 found:
-	inet_sk(sk)->num = snum;
+	inet_sk(sk)->inet_num = snum;
 	sk->sk_hash = snum;
 	if (sk_unhashed(sk)) {
 		sk_nulls_add_node_rcu(sk, &hslot->head);
@@ -229,8 +233,8 @@
 	struct inet_sock *inet1 = inet_sk(sk1), *inet2 = inet_sk(sk2);
 
 	return 	(!ipv6_only_sock(sk2)  &&
-		 (!inet1->rcv_saddr || !inet2->rcv_saddr ||
-		   inet1->rcv_saddr == inet2->rcv_saddr));
+		 (!inet1->inet_rcv_saddr || !inet2->inet_rcv_saddr ||
+		   inet1->inet_rcv_saddr == inet2->inet_rcv_saddr));
 }
 
 int udp_v4_get_port(struct sock *sk, unsigned short snum)
@@ -249,18 +253,18 @@
 		struct inet_sock *inet = inet_sk(sk);
 
 		score = (sk->sk_family == PF_INET ? 1 : 0);
-		if (inet->rcv_saddr) {
-			if (inet->rcv_saddr != daddr)
+		if (inet->inet_rcv_saddr) {
+			if (inet->inet_rcv_saddr != daddr)
 				return -1;
 			score += 2;
 		}
-		if (inet->daddr) {
-			if (inet->daddr != saddr)
+		if (inet->inet_daddr) {
+			if (inet->inet_daddr != saddr)
 				return -1;
 			score += 2;
 		}
-		if (inet->dport) {
-			if (inet->dport != sport)
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
 				return -1;
 			score += 2;
 		}
@@ -283,7 +287,7 @@
 	struct sock *sk, *result;
 	struct hlist_nulls_node *node;
 	unsigned short hnum = ntohs(dport);
-	unsigned int hash = udp_hashfn(net, hnum);
+	unsigned int hash = udp_hashfn(net, hnum, udptable->mask);
 	struct udp_hslot *hslot = &udptable->hash[hash];
 	int score, badness;
 
@@ -356,9 +360,10 @@
 
 		if (!net_eq(sock_net(s), net)				||
 		    s->sk_hash != hnum					||
-		    (inet->daddr && inet->daddr != rmt_addr)		||
-		    (inet->dport != rmt_port && inet->dport)		||
-		    (inet->rcv_saddr && inet->rcv_saddr != loc_addr)	||
+		    (inet->inet_daddr && inet->inet_daddr != rmt_addr)	||
+		    (inet->inet_dport != rmt_port && inet->inet_dport)	||
+		    (inet->inet_rcv_saddr	&&
+		     inet->inet_rcv_saddr != loc_addr)			||
 		    ipv6_only_sock(s)					||
 		    (s->sk_bound_dev_if && s->sk_bound_dev_if != dif))
 			continue;
@@ -642,14 +647,14 @@
 	} else {
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
-		daddr = inet->daddr;
-		dport = inet->dport;
+		daddr = inet->inet_daddr;
+		dport = inet->inet_dport;
 		/* Open fast path for connected socket.
 		   Route will not be used, if at least one option is set.
 		 */
 		connected = 1;
 	}
-	ipc.addr = inet->saddr;
+	ipc.addr = inet->inet_saddr;
 
 	ipc.oif = sk->sk_bound_dev_if;
 	err = sock_tx_timestamp(msg, sk, &ipc.shtx);
@@ -704,7 +709,7 @@
 				    .proto = sk->sk_protocol,
 				    .flags = inet_sk_flowi_flags(sk),
 				    .uli_u = { .ports =
-					       { .sport = inet->sport,
+					       { .sport = inet->inet_sport,
 						 .dport = dport } } };
 		struct net *net = sock_net(sk);
 
@@ -748,7 +753,7 @@
 	inet->cork.fl.fl4_dst = daddr;
 	inet->cork.fl.fl_ip_dport = dport;
 	inet->cork.fl.fl4_src = saddr;
-	inet->cork.fl.fl_ip_sport = inet->sport;
+	inet->cork.fl.fl_ip_sport = inet->inet_sport;
 	up->pending = AF_INET;
 
 do_append_data:
@@ -862,6 +867,7 @@
 		udp_lib_checksum_complete(skb)) {
 		UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS,
 				 IS_UDPLITE(sk));
+		atomic_inc(&sk->sk_drops);
 		__skb_unlink(skb, rcvq);
 		__skb_queue_tail(&list_kill, skb);
 	}
@@ -982,7 +988,7 @@
 		UDP_INC_STATS_USER(sock_net(sk),
 				UDP_MIB_INDATAGRAMS, is_udplite);
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (sin) {
@@ -1023,15 +1029,15 @@
 	 */
 
 	sk->sk_state = TCP_CLOSE;
-	inet->daddr = 0;
-	inet->dport = 0;
+	inet->inet_daddr = 0;
+	inet->inet_dport = 0;
 	sk->sk_bound_dev_if = 0;
 	if (!(sk->sk_userlocks & SOCK_BINDADDR_LOCK))
 		inet_reset_saddr(sk);
 
 	if (!(sk->sk_userlocks & SOCK_BINDPORT_LOCK)) {
 		sk->sk_prot->unhash(sk);
-		inet->sport = 0;
+		inet->inet_sport = 0;
 	}
 	sk_dst_reset(sk);
 	return 0;
@@ -1042,12 +1048,12 @@
 {
 	if (sk_hashed(sk)) {
 		struct udp_table *udptable = sk->sk_prot->h.udp_table;
-		unsigned int hash = udp_hashfn(sock_net(sk), sk->sk_hash);
-		struct udp_hslot *hslot = &udptable->hash[hash];
+		struct udp_hslot *hslot = udp_hashslot(udptable, sock_net(sk),
+						     sk->sk_hash);
 
 		spin_lock_bh(&hslot->lock);
 		if (sk_nulls_del_node_init_rcu(sk)) {
-			inet_sk(sk)->num = 0;
+			inet_sk(sk)->inet_num = 0;
 			sock_prot_inuse_add(sock_net(sk), sk->sk_prot, -1);
 		}
 		spin_unlock_bh(&hslot->lock);
@@ -1057,25 +1063,22 @@
 
 static int __udp_queue_rcv_skb(struct sock *sk, struct sk_buff *skb)
 {
-	int is_udplite = IS_UDPLITE(sk);
-	int rc;
+	int rc = sock_queue_rcv_skb(sk, skb);
 
-	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
+	if (rc < 0) {
+		int is_udplite = IS_UDPLITE(sk);
+
 		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
+		if (rc == -ENOMEM)
 			UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_RCVBUFERRORS,
 					 is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
+		UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+		kfree_skb(skb);
+		return -1;
 	}
 
 	return 0;
 
-drop:
-	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
-	kfree_skb(skb);
-	return -1;
 }
 
 /* returns:
@@ -1182,6 +1185,7 @@
 
 drop:
 	UDP_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
+	atomic_inc(&sk->sk_drops);
 	kfree_skb(skb);
 	return -1;
 }
@@ -1198,7 +1202,7 @@
 				    struct udp_table *udptable)
 {
 	struct sock *sk;
-	struct udp_hslot *hslot = &udptable->hash[udp_hashfn(net, ntohs(uh->dest))];
+	struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
 	int dif;
 
 	spin_lock(&hslot->lock);
@@ -1620,9 +1624,14 @@
 	struct udp_iter_state *state = seq->private;
 	struct net *net = seq_file_net(seq);
 
-	for (state->bucket = start; state->bucket < UDP_HTABLE_SIZE; ++state->bucket) {
+	for (state->bucket = start; state->bucket <= state->udp_table->mask;
+	     ++state->bucket) {
 		struct hlist_nulls_node *node;
 		struct udp_hslot *hslot = &state->udp_table->hash[state->bucket];
+
+		if (hlist_nulls_empty(&hslot->head))
+			continue;
+
 		spin_lock_bh(&hslot->lock);
 		sk_nulls_for_each(sk, node, &hslot->head) {
 			if (!net_eq(sock_net(sk), net))
@@ -1647,7 +1656,7 @@
 	} while (sk && (!net_eq(sock_net(sk), net) || sk->sk_family != state->family));
 
 	if (!sk) {
-		if (state->bucket < UDP_HTABLE_SIZE)
+		if (state->bucket <= state->udp_table->mask)
 			spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
 		return udp_get_first(seq, state->bucket + 1);
 	}
@@ -1667,7 +1676,7 @@
 static void *udp_seq_start(struct seq_file *seq, loff_t *pos)
 {
 	struct udp_iter_state *state = seq->private;
-	state->bucket = UDP_HTABLE_SIZE;
+	state->bucket = MAX_UDP_PORTS;
 
 	return *pos ? udp_get_idx(seq, *pos-1) : SEQ_START_TOKEN;
 }
@@ -1689,7 +1698,7 @@
 {
 	struct udp_iter_state *state = seq->private;
 
-	if (state->bucket < UDP_HTABLE_SIZE)
+	if (state->bucket <= state->udp_table->mask)
 		spin_unlock_bh(&state->udp_table->hash[state->bucket].lock);
 }
 
@@ -1744,12 +1753,12 @@
 		int bucket, int *len)
 {
 	struct inet_sock *inet = inet_sk(sp);
-	__be32 dest = inet->daddr;
-	__be32 src  = inet->rcv_saddr;
-	__u16 destp	  = ntohs(inet->dport);
-	__u16 srcp	  = ntohs(inet->sport);
+	__be32 dest = inet->inet_daddr;
+	__be32 src  = inet->inet_rcv_saddr;
+	__u16 destp	  = ntohs(inet->inet_dport);
+	__u16 srcp	  = ntohs(inet->inet_sport);
 
-	seq_printf(f, "%4d: %08X:%04X %08X:%04X"
+	seq_printf(f, "%5d: %08X:%04X %08X:%04X"
 		" %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d%n",
 		bucket, src, srcp, dest, destp, sp->sk_state,
 		sk_wmem_alloc_get(sp),
@@ -1815,11 +1824,43 @@
 }
 #endif /* CONFIG_PROC_FS */
 
-void __init udp_table_init(struct udp_table *table)
+static __initdata unsigned long uhash_entries;
+static int __init set_uhash_entries(char *str)
 {
-	int i;
+	if (!str)
+		return 0;
+	uhash_entries = simple_strtoul(str, &str, 0);
+	if (uhash_entries && uhash_entries < UDP_HTABLE_SIZE_MIN)
+		uhash_entries = UDP_HTABLE_SIZE_MIN;
+	return 1;
+}
+__setup("uhash_entries=", set_uhash_entries);
 
-	for (i = 0; i < UDP_HTABLE_SIZE; i++) {
+void __init udp_table_init(struct udp_table *table, const char *name)
+{
+	unsigned int i;
+
+	if (!CONFIG_BASE_SMALL)
+		table->hash = alloc_large_system_hash(name,
+			sizeof(struct udp_hslot),
+			uhash_entries,
+			21, /* one slot per 2 MB */
+			0,
+			&table->log,
+			&table->mask,
+			64 * 1024);
+	/*
+	 * Make sure hash table has the minimum size
+	 */
+	if (CONFIG_BASE_SMALL || table->mask < UDP_HTABLE_SIZE_MIN - 1) {
+		table->hash = kmalloc(UDP_HTABLE_SIZE_MIN *
+				      sizeof(struct udp_hslot), GFP_KERNEL);
+		if (!table->hash)
+			panic(name);
+		table->log = ilog2(UDP_HTABLE_SIZE_MIN);
+		table->mask = UDP_HTABLE_SIZE_MIN - 1;
+	}
+	for (i = 0; i <= table->mask; i++) {
 		INIT_HLIST_NULLS_HEAD(&table->hash[i].head, i);
 		spin_lock_init(&table->hash[i].lock);
 	}
@@ -1829,7 +1870,7 @@
 {
 	unsigned long nr_pages, limit;
 
-	udp_table_init(&udp_table);
+	udp_table_init(&udp_table, "UDP");
 	/* Set the pressure threshold up by the same strategy of TCP. It is a
 	 * fraction of global memory that is up to 1/2 at 256 MB, decreasing
 	 * toward zero with the amount of memory, with a floor of 128 pages.
diff --git a/net/ipv4/udplite.c b/net/ipv4/udplite.c
index 95248d7..66f7951 100644
--- a/net/ipv4/udplite.c
+++ b/net/ipv4/udplite.c
@@ -12,7 +12,7 @@
  */
 #include "udp_impl.h"
 
-struct udp_table 	udplite_table;
+struct udp_table 	udplite_table __read_mostly;
 EXPORT_SYMBOL(udplite_table);
 
 static int udplite_rcv(struct sk_buff *skb)
@@ -64,7 +64,6 @@
 	.protocol	=  IPPROTO_UDPLITE,
 	.prot		=  &udplite_prot,
 	.ops		=  &inet_dgram_ops,
-	.capability	= -1,
 	.no_check	=  0,		/* must checksum (RFC 3828) */
 	.flags		=  INET_PROTOSW_PERMANENT,
 };
@@ -110,7 +109,7 @@
 
 void __init udplite4_register(void)
 {
-	udp_table_init(&udplite_table);
+	udp_table_init(&udplite_table, "UDP-Lite");
 	if (proto_register(&udplite_prot, 1))
 		goto out_register_err;
 
diff --git a/net/ipv6/Kconfig b/net/ipv6/Kconfig
index ead6c7a..a578096 100644
--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -170,6 +170,25 @@
 
 	  Saying M here will produce a module called sit. If unsure, say Y.
 
+config IPV6_SIT_6RD
+	bool "IPv6: IPv6 Rapid Deployment (6RD) (EXPERIMENTAL)"
+	depends on IPV6_SIT && EXPERIMENTAL
+	default n
+	---help---
+	  IPv6 Rapid Deployment (6rd; draft-ietf-softwire-ipv6-6rd) builds upon
+	  mechanisms of 6to4 (RFC3056) to enable a service provider to rapidly
+	  deploy IPv6 unicast service to IPv4 sites to which it provides
+	  customer premise equipment.  Like 6to4, it utilizes stateless IPv6 in
+	  IPv4 encapsulation in order to transit IPv4-only network
+	  infrastructure.  Unlike 6to4, a 6rd service provider uses an IPv6
+	  prefix of its own in place of the fixed 6to4 prefix.
+
+	  With this option enabled, the SIT driver offers 6rd functionality by
+	  providing additional ioctl API to configure the IPv6 Prefix for in
+	  stead of static 2002::/16 for 6to4.
+
+	  If unsure, say N.
+
 config IPV6_NDISC_NODETYPE
 	bool
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 1fd0a3d..024bba3 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -481,9 +481,8 @@
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
-		rcu_read_lock();
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.forwarding) ^ (!newf);
@@ -491,9 +490,8 @@
 			if (changed)
 				dev_forward_change(idev);
 		}
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
@@ -1137,10 +1135,9 @@
 	hiscore->rule = -1;
 	hiscore->ifa = NULL;
 
-	read_lock(&dev_base_lock);
 	rcu_read_lock();
 
-	for_each_netdev(net, dev) {
+	for_each_netdev_rcu(net, dev) {
 		struct inet6_dev *idev;
 
 		/* Candidate Source Address (section 4)
@@ -1235,7 +1232,6 @@
 		read_unlock_bh(&idev->lock);
 	}
 	rcu_read_unlock();
-	read_unlock(&dev_base_lock);
 
 	if (!hiscore->ifa)
 		return -EADDRNOTAVAIL;
@@ -3708,6 +3704,7 @@
 #endif
 	array[DEVCONF_DISABLE_IPV6] = cnf->disable_ipv6;
 	array[DEVCONF_ACCEPT_DAD] = cnf->accept_dad;
+	array[DEVCONF_FORCE_TLLAO] = cnf->force_tllao;
 }
 
 static inline size_t inet6_if_nlmsg_size(void)
@@ -4051,9 +4048,8 @@
 	struct net_device *dev;
 	struct inet6_dev *idev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev) {
-		rcu_read_lock();
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev) {
 		idev = __in6_dev_get(dev);
 		if (idev) {
 			int changed = (!idev->cnf.disable_ipv6) ^ (!newf);
@@ -4061,9 +4057,8 @@
 			if (changed)
 				dev_disable_change(idev);
 		}
-		rcu_read_unlock();
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 static int addrconf_disable_ipv6(struct ctl_table *table, int *p, int old)
@@ -4353,6 +4348,14 @@
 			.proc_handler	=	proc_dointvec,
 		},
 		{
+			.ctl_name       = CTL_UNNUMBERED,
+			.procname       = "force_tllao",
+			.data           = &ipv6_devconf.force_tllao,
+			.maxlen         = sizeof(int),
+			.mode           = 0644,
+			.proc_handler   = proc_dointvec
+		},
+		{
 			.ctl_name	=	0,	/* sentinel */
 		}
 	},
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index e127a32..12e69d3 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -95,7 +95,8 @@
 	return (struct ipv6_pinfo *)(((u8 *)sk) + offset);
 }
 
-static int inet6_create(struct net *net, struct socket *sock, int protocol)
+static int inet6_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct inet_sock *inet;
 	struct ipv6_pinfo *np;
@@ -158,7 +159,7 @@
 	}
 
 	err = -EPERM;
-	if (answer->capability > 0 && !capable(answer->capability))
+	if (sock->type == SOCK_RAW && !kern && !capable(CAP_NET_RAW))
 		goto out_rcu_unlock;
 
 	sock->ops = answer->ops;
@@ -185,7 +186,7 @@
 	inet->is_icsk = (INET_PROTOSW_ICSK & answer_flags) != 0;
 
 	if (SOCK_RAW == sock->type) {
-		inet->num = protocol;
+		inet->inet_num = protocol;
 		if (IPPROTO_RAW == protocol)
 			inet->hdrincl = 1;
 	}
@@ -228,12 +229,12 @@
 	 */
 	sk_refcnt_debug_inc(sk);
 
-	if (inet->num) {
+	if (inet->inet_num) {
 		/* It assumes that any protocol which allows
 		 * the user to assign a number at socket
 		 * creation time automatically shares.
 		 */
-		inet->sport = htons(inet->num);
+		inet->inet_sport = htons(inet->inet_num);
 		sk->sk_prot->hash(sk);
 	}
 	if (sk->sk_prot->init) {
@@ -281,7 +282,7 @@
 	lock_sock(sk);
 
 	/* Check these errors (active socket, double bind). */
-	if (sk->sk_state != TCP_CLOSE || inet->num) {
+	if (sk->sk_state != TCP_CLOSE || inet->inet_num) {
 		err = -EINVAL;
 		goto out;
 	}
@@ -314,6 +315,7 @@
 		if (addr_type != IPV6_ADDR_ANY) {
 			struct net_device *dev = NULL;
 
+			rcu_read_lock();
 			if (addr_type & IPV6_ADDR_LINKLOCAL) {
 				if (addr_len >= sizeof(struct sockaddr_in6) &&
 				    addr->sin6_scope_id) {
@@ -326,12 +328,12 @@
 				/* Binding to link-local address requires an interface */
 				if (!sk->sk_bound_dev_if) {
 					err = -EINVAL;
-					goto out;
+					goto out_unlock;
 				}
-				dev = dev_get_by_index(net, sk->sk_bound_dev_if);
+				dev = dev_get_by_index_rcu(net, sk->sk_bound_dev_if);
 				if (!dev) {
 					err = -ENODEV;
-					goto out;
+					goto out_unlock;
 				}
 			}
 
@@ -342,19 +344,16 @@
 			if (!(addr_type & IPV6_ADDR_MULTICAST))	{
 				if (!ipv6_chk_addr(net, &addr->sin6_addr,
 						   dev, 0)) {
-					if (dev)
-						dev_put(dev);
 					err = -EADDRNOTAVAIL;
-					goto out;
+					goto out_unlock;
 				}
 			}
-			if (dev)
-				dev_put(dev);
+			rcu_read_unlock();
 		}
 	}
 
-	inet->rcv_saddr = v4addr;
-	inet->saddr = v4addr;
+	inet->inet_rcv_saddr = v4addr;
+	inet->inet_saddr = v4addr;
 
 	ipv6_addr_copy(&np->rcv_saddr, &addr->sin6_addr);
 
@@ -375,12 +374,15 @@
 	}
 	if (snum)
 		sk->sk_userlocks |= SOCK_BINDPORT_LOCK;
-	inet->sport = htons(inet->num);
-	inet->dport = 0;
-	inet->daddr = 0;
+	inet->inet_sport = htons(inet->inet_num);
+	inet->inet_dport = 0;
+	inet->inet_daddr = 0;
 out:
 	release_sock(sk);
 	return err;
+out_unlock:
+	rcu_read_unlock();
+	goto out;
 }
 
 EXPORT_SYMBOL(inet6_bind);
@@ -441,12 +443,12 @@
 	sin->sin6_flowinfo = 0;
 	sin->sin6_scope_id = 0;
 	if (peer) {
-		if (!inet->dport)
+		if (!inet->inet_dport)
 			return -ENOTCONN;
 		if (((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_SYN_SENT)) &&
 		    peer == 1)
 			return -ENOTCONN;
-		sin->sin6_port = inet->dport;
+		sin->sin6_port = inet->inet_dport;
 		ipv6_addr_copy(&sin->sin6_addr, &np->daddr);
 		if (np->sndflow)
 			sin->sin6_flowinfo = np->flow_label;
@@ -456,7 +458,7 @@
 		else
 			ipv6_addr_copy(&sin->sin6_addr, &np->rcv_saddr);
 
-		sin->sin6_port = inet->sport;
+		sin->sin6_port = inet->inet_sport;
 	}
 	if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 		sin->sin6_scope_id = sk->sk_bound_dev_if;
@@ -552,7 +554,7 @@
 #endif
 };
 
-static struct net_proto_family inet6_family_ops = {
+static const struct net_proto_family inet6_family_ops = {
 	.family = PF_INET6,
 	.create = inet6_create,
 	.owner	= THIS_MODULE,
@@ -654,8 +656,9 @@
 		ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 		fl.fl6_flowlabel = np->flow_label;
 		fl.oif = sk->sk_bound_dev_if;
-		fl.fl_ip_dport = inet->dport;
-		fl.fl_ip_sport = inet->sport;
+		fl.mark = sk->sk_mark;
+		fl.fl_ip_dport = inet->inet_dport;
+		fl.fl_ip_sport = inet->inet_sport;
 		security_sk_classify_flow(sk, &fl);
 
 		if (np->opt && np->opt->srcrt) {
diff --git a/net/ipv6/ah6.c b/net/ipv6/ah6.c
index c1589e2..0f526f8 100644
--- a/net/ipv6/ah6.c
+++ b/net/ipv6/ah6.c
@@ -24,18 +24,92 @@
  * 	This file is derived from net/ipv4/ah.c.
  */
 
+#include <crypto/hash.h>
 #include <linux/module.h>
 #include <net/ip.h>
 #include <net/ah.h>
 #include <linux/crypto.h>
 #include <linux/pfkeyv2.h>
-#include <linux/spinlock.h>
 #include <linux/string.h>
+#include <linux/scatterlist.h>
 #include <net/icmp.h>
 #include <net/ipv6.h>
 #include <net/protocol.h>
 #include <net/xfrm.h>
 
+#define IPV6HDR_BASELEN 8
+
+struct tmp_ext {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		struct in6_addr saddr;
+#endif
+		struct in6_addr daddr;
+		char hdrs[0];
+};
+
+struct ah_skb_cb {
+	struct xfrm_skb_cb xfrm;
+	void *tmp;
+};
+
+#define AH_SKB_CB(__skb) ((struct ah_skb_cb *)&((__skb)->cb[0]))
+
+static void *ah_alloc_tmp(struct crypto_ahash *ahash, int nfrags,
+			  unsigned int size)
+{
+	unsigned int len;
+
+	len = size + crypto_ahash_digestsize(ahash) +
+	      (crypto_ahash_alignmask(ahash) &
+	       ~(crypto_tfm_ctx_alignment() - 1));
+
+	len = ALIGN(len, crypto_tfm_ctx_alignment());
+
+	len += sizeof(struct ahash_request) + crypto_ahash_reqsize(ahash);
+	len = ALIGN(len, __alignof__(struct scatterlist));
+
+	len += sizeof(struct scatterlist) * nfrags;
+
+	return kmalloc(len, GFP_ATOMIC);
+}
+
+static inline struct tmp_ext *ah_tmp_ext(void *base)
+{
+	return base + IPV6HDR_BASELEN;
+}
+
+static inline u8 *ah_tmp_auth(u8 *tmp, unsigned int offset)
+{
+	return tmp + offset;
+}
+
+static inline u8 *ah_tmp_icv(struct crypto_ahash *ahash, void *tmp,
+			     unsigned int offset)
+{
+	return PTR_ALIGN((u8 *)tmp + offset, crypto_ahash_alignmask(ahash) + 1);
+}
+
+static inline struct ahash_request *ah_tmp_req(struct crypto_ahash *ahash,
+					       u8 *icv)
+{
+	struct ahash_request *req;
+
+	req = (void *)PTR_ALIGN(icv + crypto_ahash_digestsize(ahash),
+				crypto_tfm_ctx_alignment());
+
+	ahash_request_set_tfm(req, ahash);
+
+	return req;
+}
+
+static inline struct scatterlist *ah_req_sg(struct crypto_ahash *ahash,
+					     struct ahash_request *req)
+{
+	return (void *)ALIGN((unsigned long)(req + 1) +
+			     crypto_ahash_reqsize(ahash),
+			     __alignof__(struct scatterlist));
+}
+
 static int zero_out_mutable_opts(struct ipv6_opt_hdr *opthdr)
 {
 	u8 *opt = (u8 *)opthdr;
@@ -218,24 +292,85 @@
 	return 0;
 }
 
+static void ah6_output_done(struct crypto_async_request *base, int err)
+{
+	int extlen;
+	u8 *iph_base;
+	u8 *icv;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = skb_dst(skb)->xfrm;
+	struct ah_data *ahp = x->data;
+	struct ipv6hdr *top_iph = ipv6_hdr(skb);
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	struct tmp_ext *iph_ext;
+
+	extlen = skb_network_header_len(skb) - sizeof(struct ipv6hdr);
+	if (extlen)
+		extlen += sizeof(*iph_ext);
+
+	iph_base = AH_SKB_CB(skb)->tmp;
+	iph_ext = ah_tmp_ext(iph_base);
+	icv = ah_tmp_icv(ahp->ahash, iph_ext, extlen);
+
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+	memcpy(top_iph, iph_base, IPV6HDR_BASELEN);
+
+	if (extlen) {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		memcpy(&top_iph->saddr, iph_ext, extlen);
+#else
+		memcpy(&top_iph->daddr, iph_ext, extlen);
+#endif
+	}
+
+	err = ah->nexthdr;
+
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_output_resume(skb, err);
+}
+
 static int ah6_output(struct xfrm_state *x, struct sk_buff *skb)
 {
 	int err;
+	int nfrags;
 	int extlen;
+	u8 *iph_base;
+	u8 *icv;
+	u8 nexthdr;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct ipv6hdr *top_iph;
 	struct ip_auth_hdr *ah;
 	struct ah_data *ahp;
-	u8 nexthdr;
-	char tmp_base[8];
-	struct {
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		struct in6_addr saddr;
-#endif
-		struct in6_addr daddr;
-		char hdrs[0];
-	} *tmp_ext;
+	struct tmp_ext *iph_ext;
+
+	ahp = x->data;
+	ahash = ahp->ahash;
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
 
 	skb_push(skb, -skb_network_offset(skb));
+	extlen = skb_network_header_len(skb) - sizeof(struct ipv6hdr);
+	if (extlen)
+		extlen += sizeof(*iph_ext);
+
+	err = -ENOMEM;
+	iph_base = ah_alloc_tmp(ahash, nfrags, IPV6HDR_BASELEN + extlen);
+	if (!iph_base)
+		goto out;
+
+	iph_ext = ah_tmp_ext(iph_base);
+	icv = ah_tmp_icv(ahash, iph_ext, extlen);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	ah = ip_auth_hdr(skb);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	top_iph = ipv6_hdr(skb);
 	top_iph->payload_len = htons(skb->len - sizeof(*top_iph));
 
@@ -245,31 +380,22 @@
 	/* When there are no extension headers, we only need to save the first
 	 * 8 bytes of the base IP header.
 	 */
-	memcpy(tmp_base, top_iph, sizeof(tmp_base));
+	memcpy(iph_base, top_iph, IPV6HDR_BASELEN);
 
-	tmp_ext = NULL;
-	extlen = skb_transport_offset(skb) - sizeof(struct ipv6hdr);
 	if (extlen) {
-		extlen += sizeof(*tmp_ext);
-		tmp_ext = kmalloc(extlen, GFP_ATOMIC);
-		if (!tmp_ext) {
-			err = -ENOMEM;
-			goto error;
-		}
 #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		memcpy(tmp_ext, &top_iph->saddr, extlen);
+		memcpy(iph_ext, &top_iph->saddr, extlen);
 #else
-		memcpy(tmp_ext, &top_iph->daddr, extlen);
+		memcpy(iph_ext, &top_iph->daddr, extlen);
 #endif
 		err = ipv6_clear_mutable_options(top_iph,
-						 extlen - sizeof(*tmp_ext) +
+						 extlen - sizeof(*iph_ext) +
 						 sizeof(*top_iph),
 						 XFRM_POLICY_OUT);
 		if (err)
-			goto error_free_iph;
+			goto out_free;
 	}
 
-	ah = ip_auth_hdr(skb);
 	ah->nexthdr = nexthdr;
 
 	top_iph->priority    = 0;
@@ -278,36 +404,80 @@
 	top_iph->flow_lbl[2] = 0;
 	top_iph->hop_limit   = 0;
 
-	ahp = x->data;
 	ah->hdrlen  = (XFRM_ALIGN8(sizeof(*ah) + ahp->icv_trunc_len) >> 2) - 2;
 
 	ah->reserved = 0;
 	ah->spi = x->id.spi;
 	ah->seq_no = htonl(XFRM_SKB_CB(skb)->seq.output);
 
-	spin_lock_bh(&x->lock);
-	err = ah_mac_digest(ahp, skb, ah->auth_data);
-	memcpy(ah->auth_data, ahp->work_icv, ahp->icv_trunc_len);
-	spin_unlock_bh(&x->lock);
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-	if (err)
-		goto error_free_iph;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah6_output_done, skb);
 
-	memcpy(top_iph, tmp_base, sizeof(tmp_base));
-	if (tmp_ext) {
-#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
-		memcpy(&top_iph->saddr, tmp_ext, extlen);
-#else
-		memcpy(&top_iph->daddr, tmp_ext, extlen);
-#endif
-error_free_iph:
-		kfree(tmp_ext);
+	AH_SKB_CB(skb)->tmp = iph_base;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
 	}
 
-error:
+	memcpy(ah->auth_data, icv, ahp->icv_trunc_len);
+	memcpy(top_iph, iph_base, IPV6HDR_BASELEN);
+
+	if (extlen) {
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+		memcpy(&top_iph->saddr, iph_ext, extlen);
+#else
+		memcpy(&top_iph->daddr, iph_ext, extlen);
+#endif
+	}
+
+out_free:
+	kfree(iph_base);
+out:
 	return err;
 }
 
+static void ah6_input_done(struct crypto_async_request *base, int err)
+{
+	u8 *auth_data;
+	u8 *icv;
+	u8 *work_iph;
+	struct sk_buff *skb = base->data;
+	struct xfrm_state *x = xfrm_input_state(skb);
+	struct ah_data *ahp = x->data;
+	struct ip_auth_hdr *ah = ip_auth_hdr(skb);
+	int hdr_len = skb_network_header_len(skb);
+	int ah_hlen = (ah->hdrlen + 2) << 2;
+
+	work_iph = AH_SKB_CB(skb)->tmp;
+	auth_data = ah_tmp_auth(work_iph, hdr_len);
+	icv = ah_tmp_icv(ahp->ahash, auth_data, ahp->icv_trunc_len);
+
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
+	if (err)
+		goto out;
+
+	skb->network_header += ah_hlen;
+	memcpy(skb_network_header(skb), work_iph, hdr_len);
+	__skb_pull(skb, ah_hlen + hdr_len);
+	skb_set_transport_header(skb, -hdr_len);
+
+	err = ah->nexthdr;
+out:
+	kfree(AH_SKB_CB(skb)->tmp);
+	xfrm_input_resume(skb, err);
+}
+
+
+
 static int ah6_input(struct xfrm_state *x, struct sk_buff *skb)
 {
 	/*
@@ -325,14 +495,21 @@
 	 * There is offset of AH before IPv6 header after the process.
 	 */
 
+	u8 *auth_data;
+	u8 *icv;
+	u8 *work_iph;
+	struct sk_buff *trailer;
+	struct crypto_ahash *ahash;
+	struct ahash_request *req;
+	struct scatterlist *sg;
 	struct ip_auth_hdr *ah;
 	struct ipv6hdr *ip6h;
 	struct ah_data *ahp;
-	unsigned char *tmp_hdr = NULL;
 	u16 hdr_len;
 	u16 ah_hlen;
 	int nexthdr;
-	int err = -EINVAL;
+	int nfrags;
+	int err = -ENOMEM;
 
 	if (!pskb_may_pull(skb, sizeof(struct ip_auth_hdr)))
 		goto out;
@@ -345,9 +522,11 @@
 
 	skb->ip_summed = CHECKSUM_NONE;
 
-	hdr_len = skb->data - skb_network_header(skb);
+	hdr_len = skb_network_header_len(skb);
 	ah = (struct ip_auth_hdr *)skb->data;
 	ahp = x->data;
+	ahash = ahp->ahash;
+
 	nexthdr = ah->nexthdr;
 	ah_hlen = (ah->hdrlen + 2) << 2;
 
@@ -358,48 +537,67 @@
 	if (!pskb_may_pull(skb, ah_hlen))
 		goto out;
 
-	tmp_hdr = kmemdup(skb_network_header(skb), hdr_len, GFP_ATOMIC);
-	if (!tmp_hdr)
-		goto out;
 	ip6h = ipv6_hdr(skb);
+
+	skb_push(skb, hdr_len);
+
+	if ((err = skb_cow_data(skb, 0, &trailer)) < 0)
+		goto out;
+	nfrags = err;
+
+	work_iph = ah_alloc_tmp(ahash, nfrags, hdr_len + ahp->icv_trunc_len);
+	if (!work_iph)
+		goto out;
+
+	auth_data = ah_tmp_auth(work_iph, hdr_len);
+	icv = ah_tmp_icv(ahash, auth_data, ahp->icv_trunc_len);
+	req = ah_tmp_req(ahash, icv);
+	sg = ah_req_sg(ahash, req);
+
+	memcpy(work_iph, ip6h, hdr_len);
+	memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
+	memset(ah->auth_data, 0, ahp->icv_trunc_len);
+
 	if (ipv6_clear_mutable_options(ip6h, hdr_len, XFRM_POLICY_IN))
-		goto free_out;
+		goto out_free;
+
 	ip6h->priority    = 0;
 	ip6h->flow_lbl[0] = 0;
 	ip6h->flow_lbl[1] = 0;
 	ip6h->flow_lbl[2] = 0;
 	ip6h->hop_limit   = 0;
 
-	spin_lock(&x->lock);
-	{
-		u8 auth_data[MAX_AH_AUTH_LEN];
+	sg_init_table(sg, nfrags);
+	skb_to_sgvec(skb, sg, 0, skb->len);
 
-		memcpy(auth_data, ah->auth_data, ahp->icv_trunc_len);
-		memset(ah->auth_data, 0, ahp->icv_trunc_len);
-		skb_push(skb, hdr_len);
-		err = ah_mac_digest(ahp, skb, ah->auth_data);
-		if (err)
-			goto unlock;
-		if (memcmp(ahp->work_icv, auth_data, ahp->icv_trunc_len))
-			err = -EBADMSG;
+	ahash_request_set_crypt(req, sg, icv, skb->len);
+	ahash_request_set_callback(req, 0, ah6_input_done, skb);
+
+	AH_SKB_CB(skb)->tmp = work_iph;
+
+	err = crypto_ahash_digest(req);
+	if (err) {
+		if (err == -EINPROGRESS)
+			goto out;
+
+		if (err == -EBUSY)
+			err = NET_XMIT_DROP;
+		goto out_free;
 	}
-unlock:
-	spin_unlock(&x->lock);
 
+	err = memcmp(icv, auth_data, ahp->icv_trunc_len) ? -EBADMSG: 0;
 	if (err)
-		goto free_out;
+		goto out_free;
 
 	skb->network_header += ah_hlen;
-	memcpy(skb_network_header(skb), tmp_hdr, hdr_len);
+	memcpy(skb_network_header(skb), work_iph, hdr_len);
 	skb->transport_header = skb->network_header;
 	__skb_pull(skb, ah_hlen + hdr_len);
 
-	kfree(tmp_hdr);
+	err = nexthdr;
 
-	return nexthdr;
-
-free_out:
-	kfree(tmp_hdr);
+out_free:
+	kfree(work_iph);
 out:
 	return err;
 }
@@ -430,7 +628,7 @@
 {
 	struct ah_data *ahp = NULL;
 	struct xfrm_algo_desc *aalg_desc;
-	struct crypto_hash *tfm;
+	struct crypto_ahash *ahash;
 
 	if (!x->aalg)
 		goto error;
@@ -442,12 +640,12 @@
 	if (ahp == NULL)
 		return -ENOMEM;
 
-	tfm = crypto_alloc_hash(x->aalg->alg_name, 0, CRYPTO_ALG_ASYNC);
-	if (IS_ERR(tfm))
+	ahash = crypto_alloc_ahash(x->aalg->alg_name, 0, 0);
+	if (IS_ERR(ahash))
 		goto error;
 
-	ahp->tfm = tfm;
-	if (crypto_hash_setkey(tfm, x->aalg->alg_key,
+	ahp->ahash = ahash;
+	if (crypto_ahash_setkey(ahash, x->aalg->alg_key,
 			       (x->aalg->alg_key_len + 7) / 8))
 		goto error;
 
@@ -461,9 +659,9 @@
 	BUG_ON(!aalg_desc);
 
 	if (aalg_desc->uinfo.auth.icv_fullbits/8 !=
-	    crypto_hash_digestsize(tfm)) {
+	    crypto_ahash_digestsize(ahash)) {
 		printk(KERN_INFO "AH: %s digestsize %u != %hu\n",
-		       x->aalg->alg_name, crypto_hash_digestsize(tfm),
+		       x->aalg->alg_name, crypto_ahash_digestsize(ahash),
 		       aalg_desc->uinfo.auth.icv_fullbits/8);
 		goto error;
 	}
@@ -473,10 +671,6 @@
 
 	BUG_ON(ahp->icv_trunc_len > MAX_AH_AUTH_LEN);
 
-	ahp->work_icv = kmalloc(ahp->icv_full_len, GFP_KERNEL);
-	if (!ahp->work_icv)
-		goto error;
-
 	x->props.header_len = XFRM_ALIGN8(sizeof(struct ip_auth_hdr) +
 					  ahp->icv_trunc_len);
 	switch (x->props.mode) {
@@ -495,8 +689,7 @@
 
 error:
 	if (ahp) {
-		kfree(ahp->work_icv);
-		crypto_free_hash(ahp->tfm);
+		crypto_free_ahash(ahp->ahash);
 		kfree(ahp);
 	}
 	return -EINVAL;
@@ -509,8 +702,7 @@
 	if (!ahp)
 		return;
 
-	kfree(ahp->work_icv);
-	crypto_free_hash(ahp->tfm);
+	crypto_free_ahash(ahp->ahash);
 	kfree(ahp);
 }
 
diff --git a/net/ipv6/anycast.c b/net/ipv6/anycast.c
index 1ae58be..2f00ca8 100644
--- a/net/ipv6/anycast.c
+++ b/net/ipv6/anycast.c
@@ -404,13 +404,13 @@
 
 	if (dev)
 		return ipv6_chk_acast_dev(dev, addr);
-	read_lock(&dev_base_lock);
-	for_each_netdev(net, dev)
+	rcu_read_lock();
+	for_each_netdev_rcu(net, dev)
 		if (ipv6_chk_acast_dev(dev, addr)) {
 			found = 1;
 			break;
 		}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return found;
 }
 
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index e2bdc6d..e6f9cdf 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -98,17 +98,15 @@
 		if (err)
 			goto out;
 
-		ipv6_addr_set(&np->daddr, 0, 0, htonl(0x0000ffff), inet->daddr);
+		ipv6_addr_set_v4mapped(inet->inet_daddr, &np->daddr);
 
-		if (ipv6_addr_any(&np->saddr)) {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000ffff),
-				      inet->saddr);
-		}
+		if (ipv6_addr_any(&np->saddr))
+			ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
 
-		if (ipv6_addr_any(&np->rcv_saddr)) {
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000ffff),
-				      inet->rcv_saddr);
-		}
+		if (ipv6_addr_any(&np->rcv_saddr))
+			ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
+					       &np->rcv_saddr);
+
 		goto out;
 	}
 
@@ -136,7 +134,7 @@
 	ipv6_addr_copy(&np->daddr, daddr);
 	np->flow_label = fl.fl6_flowlabel;
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	/*
 	 *	Check for a route to destination an obtain the
@@ -147,8 +145,9 @@
 	ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 	ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 	fl.oif = sk->sk_bound_dev_if;
-	fl.fl_ip_dport = inet->dport;
-	fl.fl_ip_sport = inet->sport;
+	fl.mark = sk->sk_mark;
+	fl.fl_ip_dport = inet->inet_dport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	if (!fl.oif && (addr_type&IPV6_ADDR_MULTICAST))
 		fl.oif = np->mcast_oif;
@@ -190,7 +189,7 @@
 
 	if (ipv6_addr_any(&np->rcv_saddr)) {
 		ipv6_addr_copy(&np->rcv_saddr, &fl.fl6_src);
-		inet->rcv_saddr = LOOPBACK4_IPV6;
+		inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 	}
 
 	ip6_dst_store(sk, dst,
@@ -329,9 +328,8 @@
 			if (ipv6_addr_type(&sin->sin6_addr) & IPV6_ADDR_LINKLOCAL)
 				sin->sin6_scope_id = IP6CB(skb)->iif;
 		} else {
-			ipv6_addr_set(&sin->sin6_addr, 0, 0,
-				      htonl(0xffff),
-				      *(__be32 *)(nh + serr->addr_offset));
+			ipv6_addr_set_v4mapped(*(__be32 *)(nh + serr->addr_offset),
+					       &sin->sin6_addr);
 		}
 	}
 
@@ -351,8 +349,8 @@
 		} else {
 			struct inet_sock *inet = inet_sk(sk);
 
-			ipv6_addr_set(&sin->sin6_addr, 0, 0,
-				      htonl(0xffff), ip_hdr(skb)->saddr);
+			ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
+					       &sin->sin6_addr);
 			if (inet->cmsg_flags)
 				ip_cmsg_recv(msg, skb);
 		}
@@ -539,12 +537,17 @@
 
 			addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
 
+			rcu_read_lock();
 			if (fl->oif) {
-				dev = dev_get_by_index(net, fl->oif);
-				if (!dev)
+				dev = dev_get_by_index_rcu(net, fl->oif);
+				if (!dev) {
+					rcu_read_unlock();
 					return -ENODEV;
-			} else if (addr_type & IPV6_ADDR_LINKLOCAL)
+				}
+			} else if (addr_type & IPV6_ADDR_LINKLOCAL) {
+				rcu_read_unlock();
 				return -EINVAL;
+			}
 
 			if (addr_type != IPV6_ADDR_ANY) {
 				int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
@@ -555,8 +558,7 @@
 					ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
 			}
 
-			if (dev)
-				dev_put(dev);
+			rcu_read_unlock();
 
 			if (err)
 				goto exit_f;
diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c
index cc4797d..3516e6f 100644
--- a/net/ipv6/inet6_connection_sock.c
+++ b/net/ipv6/inet6_connection_sock.c
@@ -132,7 +132,7 @@
 
 	sin6->sin6_family = AF_INET6;
 	ipv6_addr_copy(&sin6->sin6_addr, &np->daddr);
-	sin6->sin6_port	= inet_sk(sk)->dport;
+	sin6->sin6_port	= inet_sk(sk)->inet_dport;
 	/* We do not store received flowlabel for TCP */
 	sin6->sin6_flowinfo = 0;
 	sin6->sin6_scope_id = 0;
@@ -168,8 +168,7 @@
 	if (dst) {
 		struct rt6_info *rt = (struct rt6_info *)dst;
 		if (rt->rt6i_flow_cache_genid != atomic_read(&flow_cache_genid)) {
-			sk->sk_dst_cache = NULL;
-			dst_release(dst);
+			__sk_dst_reset(sk);
 			dst = NULL;
 		}
 	}
@@ -194,8 +193,9 @@
 	fl.fl6_flowlabel = np->flow_label;
 	IP6_ECN_flow_xmit(sk, fl.fl6_flowlabel);
 	fl.oif = sk->sk_bound_dev_if;
-	fl.fl_ip_sport = inet->sport;
-	fl.fl_ip_dport = inet->dport;
+	fl.mark = sk->sk_mark;
+	fl.fl_ip_sport = inet->inet_sport;
+	fl.fl_ip_dport = inet->inet_dport;
 	security_sk_classify_flow(sk, &fl);
 
 	if (np->opt && np->opt->srcrt) {
diff --git a/net/ipv6/inet6_hashtables.c b/net/ipv6/inet6_hashtables.c
index 1bcc343..00c6a3e 100644
--- a/net/ipv6/inet6_hashtables.c
+++ b/net/ipv6/inet6_hashtables.c
@@ -73,7 +73,7 @@
 	 * have wildcards anyways.
 	 */
 	unsigned int hash = inet6_ehashfn(net, daddr, hnum, saddr, sport);
-	unsigned int slot = hash & (hashinfo->ehash_size - 1);
+	unsigned int slot = hash & hashinfo->ehash_mask;
 	struct inet_ehash_bucket *head = &hashinfo->ehash[slot];
 
 
@@ -125,7 +125,7 @@
 {
 	int score = -1;
 
-	if (net_eq(sock_net(sk), net) && inet_sk(sk)->num == hnum &&
+	if (net_eq(sock_net(sk), net) && inet_sk(sk)->inet_num == hnum &&
 	    sk->sk_family == PF_INET6) {
 		const struct ipv6_pinfo *np = inet6_sk(sk);
 
@@ -214,10 +214,10 @@
 	const struct in6_addr *daddr = &np->rcv_saddr;
 	const struct in6_addr *saddr = &np->daddr;
 	const int dif = sk->sk_bound_dev_if;
-	const __portpair ports = INET_COMBINED_PORTS(inet->dport, lport);
+	const __portpair ports = INET_COMBINED_PORTS(inet->inet_dport, lport);
 	struct net *net = sock_net(sk);
 	const unsigned int hash = inet6_ehashfn(net, daddr, lport, saddr,
-						inet->dport);
+						inet->inet_dport);
 	struct inet_ehash_bucket *head = inet_ehash_bucket(hinfo, hash);
 	spinlock_t *lock = inet_ehash_lockp(hinfo, hash);
 	struct sock *sk2;
@@ -248,8 +248,8 @@
 unique:
 	/* Must record num and sport now. Otherwise we will see
 	 * in hash table socket with a funny identity. */
-	inet->num = lport;
-	inet->sport = htons(lport);
+	inet->inet_num = lport;
+	inet->inet_sport = htons(lport);
 	WARN_ON(!sk_unhashed(sk));
 	__sk_nulls_add_node_rcu(sk, &head->chain);
 	sk->sk_hash = hash;
@@ -279,7 +279,7 @@
 	const struct ipv6_pinfo *np = inet6_sk(sk);
 	return secure_ipv6_port_ephemeral(np->rcv_saddr.s6_addr32,
 					  np->daddr.s6_addr32,
-					  inet->dport);
+					  inet->inet_dport);
 }
 
 int inet6_hash_connect(struct inet_timewait_death_row *death_row,
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index c595bbe..1d61411 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -88,8 +88,10 @@
 	struct ip6_tnl **tnls[2];
 };
 
-/* lock for the tunnel lists */
-static DEFINE_RWLOCK(ip6_tnl_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ip6_tnl_lock);
 
 static inline struct dst_entry *ip6_tnl_dst_check(struct ip6_tnl *t)
 {
@@ -130,6 +132,9 @@
  *   else %NULL
  **/
 
+#define for_each_ip6_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
+
 static struct ip6_tnl *
 ip6_tnl_lookup(struct net *net, struct in6_addr *remote, struct in6_addr *local)
 {
@@ -138,13 +143,14 @@
 	struct ip6_tnl *t;
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
-	for (t = ip6n->tnls_r_l[h0 ^ h1]; t; t = t->next) {
+	for_each_ip6_tunnel_rcu(ip6n->tnls_r_l[h0 ^ h1]) {
 		if (ipv6_addr_equal(local, &t->parms.laddr) &&
 		    ipv6_addr_equal(remote, &t->parms.raddr) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	if ((t = ip6n->tnls_wc[0]) != NULL && (t->dev->flags & IFF_UP))
+	t = rcu_dereference(ip6n->tnls_wc[0]);
+	if (t && (t->dev->flags & IFF_UP))
 		return t;
 
 	return NULL;
@@ -186,10 +192,10 @@
 {
 	struct ip6_tnl **tp = ip6_tnl_bucket(ip6n, &t->parms);
 
+	spin_lock_bh(&ip6_tnl_lock);
 	t->next = *tp;
-	write_lock_bh(&ip6_tnl_lock);
-	*tp = t;
-	write_unlock_bh(&ip6_tnl_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ip6_tnl_lock);
 }
 
 /**
@@ -204,9 +210,9 @@
 
 	for (tp = ip6_tnl_bucket(ip6n, &t->parms); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ip6_tnl_lock);
+			spin_lock_bh(&ip6_tnl_lock);
 			*tp = t->next;
-			write_unlock_bh(&ip6_tnl_lock);
+			spin_unlock_bh(&ip6_tnl_lock);
 			break;
 		}
 	}
@@ -313,9 +319,9 @@
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
 
 	if (dev == ip6n->fb_tnl_dev) {
-		write_lock_bh(&ip6_tnl_lock);
+		spin_lock_bh(&ip6_tnl_lock);
 		ip6n->tnls_wc[0] = NULL;
-		write_unlock_bh(&ip6_tnl_lock);
+		spin_unlock_bh(&ip6_tnl_lock);
 	} else {
 		ip6_tnl_unlink(ip6n, t);
 	}
@@ -409,7 +415,7 @@
 	   in trouble since we might need the source address for further
 	   processing of the error. */
 
-	read_lock(&ip6_tnl_lock);
+	rcu_read_lock();
 	if ((t = ip6_tnl_lookup(dev_net(skb->dev), &ipv6h->daddr,
 					&ipv6h->saddr)) == NULL)
 		goto out;
@@ -482,7 +488,7 @@
 	*msg = rel_msg;
 
 out:
-	read_unlock(&ip6_tnl_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -652,6 +658,7 @@
 		IP6_ECN_set_ce(ipv6_hdr(skb));
 }
 
+/* called with rcu_read_lock() */
 static inline int ip6_tnl_rcv_ctl(struct ip6_tnl *t)
 {
 	struct ip6_tnl_parm *p = &t->parms;
@@ -662,15 +669,13 @@
 		struct net_device *ldev = NULL;
 
 		if (p->link)
-			ldev = dev_get_by_index(net, p->link);
+			ldev = dev_get_by_index_rcu(net, p->link);
 
 		if ((ipv6_addr_is_multicast(&p->laddr) ||
 		     likely(ipv6_chk_addr(net, &p->laddr, ldev, 0))) &&
 		    likely(!ipv6_chk_addr(net, &p->raddr, NULL, 0)))
 			ret = 1;
 
-		if (ldev)
-			dev_put(ldev);
 	}
 	return ret;
 }
@@ -693,23 +698,23 @@
 	struct ip6_tnl *t;
 	struct ipv6hdr *ipv6h = ipv6_hdr(skb);
 
-	read_lock(&ip6_tnl_lock);
+	rcu_read_lock();
 
 	if ((t = ip6_tnl_lookup(dev_net(skb->dev), &ipv6h->saddr,
 					&ipv6h->daddr)) != NULL) {
 		if (t->parms.proto != ipproto && t->parms.proto != 0) {
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 
 		if (!xfrm6_policy_check(NULL, XFRM_POLICY_IN, skb)) {
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 
 		if (!ip6_tnl_rcv_ctl(t)) {
 			t->dev->stats.rx_dropped++;
-			read_unlock(&ip6_tnl_lock);
+			rcu_read_unlock();
 			goto discard;
 		}
 		secpath_reset(skb);
@@ -727,10 +732,10 @@
 		t->dev->stats.rx_packets++;
 		t->dev->stats.rx_bytes += skb->len;
 		netif_rx(skb);
-		read_unlock(&ip6_tnl_lock);
+		rcu_read_unlock();
 		return 0;
 	}
-	read_unlock(&ip6_tnl_lock);
+	rcu_read_unlock();
 	return 1;
 
 discard:
@@ -798,8 +803,9 @@
 	if (p->flags & IP6_TNL_F_CAP_XMIT) {
 		struct net_device *ldev = NULL;
 
+		rcu_read_lock();
 		if (p->link)
-			ldev = dev_get_by_index(net, p->link);
+			ldev = dev_get_by_index_rcu(net, p->link);
 
 		if (unlikely(!ipv6_chk_addr(net, &p->laddr, ldev, 0)))
 			printk(KERN_WARNING
@@ -813,8 +819,7 @@
 			       p->name);
 		else
 			ret = 1;
-		if (ldev)
-			dev_put(ldev);
+		rcu_read_unlock();
 	}
 	return ret;
 }
@@ -1387,14 +1392,19 @@
 {
 	int h;
 	struct ip6_tnl *t;
+	LIST_HEAD(list);
 
 	for (h = 0; h < HASH_SIZE; h++) {
-		while ((t = ip6n->tnls_r_l[h]) != NULL)
-			unregister_netdevice(t->dev);
+		t = ip6n->tnls_r_l[h];
+		while (t != NULL) {
+			unregister_netdevice_queue(t->dev, &list);
+			t = t->next;
+		}
 	}
 
 	t = ip6n->tnls_wc[0];
-	unregister_netdevice(t->dev);
+	unregister_netdevice_queue(t->dev, &list);
+	unregister_netdevice_many(&list);
 }
 
 static int ip6_tnl_init_net(struct net *net)
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 7161539..52e0f74 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -477,7 +477,7 @@
  *	Delete a VIF entry
  */
 
-static int mif6_delete(struct net *net, int vifi)
+static int mif6_delete(struct net *net, int vifi, struct list_head *head)
 {
 	struct mif_device *v;
 	struct net_device *dev;
@@ -519,7 +519,7 @@
 		in6_dev->cnf.mc_forwarding--;
 
 	if (v->flags & MIFF_REGISTER)
-		unregister_netdevice(dev);
+		unregister_netdevice_queue(dev, head);
 
 	dev_put(dev);
 	return 0;
@@ -976,6 +976,7 @@
 	struct net *net = dev_net(dev);
 	struct mif_device *v;
 	int ct;
+	LIST_HEAD(list);
 
 	if (event != NETDEV_UNREGISTER)
 		return NOTIFY_DONE;
@@ -983,8 +984,10 @@
 	v = &net->ipv6.vif6_table[0];
 	for (ct = 0; ct < net->ipv6.maxvif; ct++, v++) {
 		if (v->dev == dev)
-			mif6_delete(net, ct);
+			mif6_delete(net, ct, &list);
 	}
+	unregister_netdevice_many(&list);
+
 	return NOTIFY_DONE;
 }
 
@@ -1188,14 +1191,16 @@
 static void mroute_clean_tables(struct net *net)
 {
 	int i;
+	LIST_HEAD(list);
 
 	/*
 	 *	Shut down all active vif entries
 	 */
 	for (i = 0; i < net->ipv6.maxvif; i++) {
 		if (!(net->ipv6.vif6_table[i].flags & VIFF_STATIC))
-			mif6_delete(net, i);
+			mif6_delete(net, i, &list);
 	}
+	unregister_netdevice_many(&list);
 
 	/*
 	 *	Wipe the cache
@@ -1297,7 +1302,7 @@
 	switch (optname) {
 	case MRT6_INIT:
 		if (sk->sk_type != SOCK_RAW ||
-		    inet_sk(sk)->num != IPPROTO_ICMPV6)
+		    inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		if (optlen < sizeof(int))
 			return -EINVAL;
@@ -1325,7 +1330,7 @@
 		if (copy_from_user(&mifi, optval, sizeof(mifi_t)))
 			return -EFAULT;
 		rtnl_lock();
-		ret = mif6_delete(net, mifi);
+		ret = mif6_delete(net, mifi, NULL);
 		rtnl_unlock();
 		return ret;
 
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 4f7aaf6..430454e 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -64,7 +64,7 @@
 	struct ip6_ra_chain *ra, *new_ra, **rap;
 
 	/* RA packet may be delivered ONLY to IPPROTO_RAW socket */
-	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW)
+	if (sk->sk_type != SOCK_RAW || inet_sk(sk)->inet_num != IPPROTO_RAW)
 		return -ENOPROTOOPT;
 
 	new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -106,7 +106,7 @@
 	if (inet_sk(sk)->is_icsk) {
 		if (opt &&
 		    !((1 << sk->sk_state) & (TCPF_LISTEN | TCPF_CLOSE)) &&
-		    inet_sk(sk)->daddr != LOOPBACK4_IPV6) {
+		    inet_sk(sk)->inet_daddr != LOOPBACK4_IPV6) {
 			struct inet_connection_sock *icsk = inet_csk(sk);
 			icsk->icsk_ext_hdr_len = opt->opt_flen + opt->opt_nflen;
 			icsk->icsk_sync_mss(sk, icsk->icsk_pmtu_cookie);
@@ -234,7 +234,7 @@
 
 	case IPV6_V6ONLY:
 		if (optlen < sizeof(int) ||
-		    inet_sk(sk)->num)
+		    inet_sk(sk)->inet_num)
 			goto e_inval;
 		np->ipv6only = valbool;
 		retv = 0;
@@ -424,6 +424,7 @@
 
 		fl.fl6_flowlabel = 0;
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 
 		if (optlen == 0)
 			goto update;
@@ -665,7 +666,7 @@
 	case IPV6_MTU_DISCOVER:
 		if (optlen < sizeof(int))
 			goto e_inval;
-		if (val<0 || val>3)
+		if (val < IP_PMTUDISC_DONT || val > IP_PMTUDISC_PROBE)
 			goto e_inval;
 		np->pmtudisc = val;
 		retv = 0;
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index f74e4e2..3507cfe 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -598,6 +598,7 @@
 	icmp6h.icmp6_solicited = solicited;
 	icmp6h.icmp6_override = override;
 
+	inc_opt |= ifp->idev->cnf.force_tllao;
 	__ndisc_send(dev, neigh, daddr, src_addr,
 		     &icmp6h, solicited_addr,
 		     inc_opt ? ND_OPT_TARGET_LL_ADDR : 0);
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 4f24570..818ef21 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -72,7 +72,7 @@
 	int is_multicast = ipv6_addr_is_multicast(loc_addr);
 
 	sk_for_each_from(sk, node)
-		if (inet_sk(sk)->num == num) {
+		if (inet_sk(sk)->inet_num == num) {
 			struct ipv6_pinfo *np = inet6_sk(sk);
 
 			if (!net_eq(sock_net(sk), net))
@@ -298,7 +298,7 @@
 			dev_put(dev);
 	}
 
-	inet->rcv_saddr = inet->saddr = v4addr;
+	inet->inet_rcv_saddr = inet->inet_saddr = v4addr;
 	ipv6_addr_copy(&np->rcv_saddr, &addr->sin6_addr);
 	if (!(addr_type & IPV6_ADDR_MULTICAST))
 		ipv6_addr_copy(&np->saddr, &addr->sin6_addr);
@@ -381,8 +381,7 @@
 	}
 
 	/* Charge it to the socket. */
-	if (sock_queue_rcv_skb(sk,skb)<0) {
-		atomic_inc(&sk->sk_drops);
+	if (sock_queue_rcv_skb(sk, skb) < 0) {
 		kfree_skb(skb);
 		return NET_RX_DROP;
 	}
@@ -416,14 +415,14 @@
 				   skb_network_header_len(skb));
 		if (!csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 				     &ipv6_hdr(skb)->daddr,
-				     skb->len, inet->num, skb->csum))
+				     skb->len, inet->inet_num, skb->csum))
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 	}
 	if (!skb_csum_unnecessary(skb))
 		skb->csum = ~csum_unfold(csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
 							 &ipv6_hdr(skb)->daddr,
 							 skb->len,
-							 inet->num, 0));
+							 inet->inet_num, 0));
 
 	if (inet->hdrincl) {
 		if (skb_checksum_complete(skb)) {
@@ -497,7 +496,7 @@
 			sin6->sin6_scope_id = IP6CB(skb)->iif;
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (np->rxopt.all)
 		datagram_recv_ctl(sk, msg, skb);
@@ -518,7 +517,6 @@
 	   as some normal condition.
 	 */
 	err = (flags&MSG_DONTWAIT) ? -EAGAIN : -EHOSTUNREACH;
-	atomic_inc(&sk->sk_drops);
 	goto out;
 }
 
@@ -766,8 +764,8 @@
 		proto = ntohs(sin6->sin6_port);
 
 		if (!proto)
-			proto = inet->num;
-		else if (proto != inet->num)
+			proto = inet->inet_num;
+		else if (proto != inet->inet_num)
 			return(-EINVAL);
 
 		if (proto > 255)
@@ -800,7 +798,7 @@
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
 
-		proto = inet->num;
+		proto = inet->inet_num;
 		daddr = &np->daddr;
 		fl.fl6_flowlabel = np->flow_label;
 	}
@@ -967,7 +965,7 @@
 
 	switch (optname) {
 		case IPV6_CHECKSUM:
-			if (inet_sk(sk)->num == IPPROTO_ICMPV6 &&
+			if (inet_sk(sk)->inet_num == IPPROTO_ICMPV6 &&
 			    level == IPPROTO_IPV6) {
 				/*
 				 * RFC3542 tells that IPV6_CHECKSUM socket
@@ -1007,7 +1005,7 @@
 			break;
 
 		case SOL_ICMPV6:
-			if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+			if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 				return -EOPNOTSUPP;
 			return rawv6_seticmpfilter(sk, level, optname, optval,
 						   optlen);
@@ -1030,7 +1028,7 @@
 	case SOL_RAW:
 		break;
 	case SOL_ICMPV6:
-		if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		return rawv6_seticmpfilter(sk, level, optname, optval, optlen);
 	case SOL_IPV6:
@@ -1087,7 +1085,7 @@
 			break;
 
 		case SOL_ICMPV6:
-			if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+			if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 				return -EOPNOTSUPP;
 			return rawv6_geticmpfilter(sk, level, optname, optval,
 						   optlen);
@@ -1110,7 +1108,7 @@
 	case SOL_RAW:
 		break;
 	case SOL_ICMPV6:
-		if (inet_sk(sk)->num != IPPROTO_ICMPV6)
+		if (inet_sk(sk)->inet_num != IPPROTO_ICMPV6)
 			return -EOPNOTSUPP;
 		return rawv6_geticmpfilter(sk, level, optname, optval, optlen);
 	case SOL_IPV6:
@@ -1157,7 +1155,7 @@
 
 static void rawv6_close(struct sock *sk, long timeout)
 {
-	if (inet_sk(sk)->num == IPPROTO_RAW)
+	if (inet_sk(sk)->inet_num == IPPROTO_RAW)
 		ip6_ra_control(sk, -1);
 	ip6mr_sk_done(sk);
 	sk_common_release(sk);
@@ -1176,7 +1174,7 @@
 {
 	struct raw6_sock *rp = raw6_sk(sk);
 
-	switch (inet_sk(sk)->num) {
+	switch (inet_sk(sk)->inet_num) {
 	case IPPROTO_ICMPV6:
 		rp->checksum = 1;
 		rp->offset   = 2;
@@ -1226,7 +1224,7 @@
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
 	destp = 0;
-	srcp  = inet_sk(sp)->num;
+	srcp  = inet_sk(sp)->inet_num;
 	seq_printf(seq,
 		   "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
 		   "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
@@ -1338,7 +1336,6 @@
 	.protocol	= IPPROTO_IP,	/* wild card */
 	.prot		= &rawv6_prot,
 	.ops		= &inet6_sockraw_ops,
-	.capability	= CAP_NET_RAW,
 	.no_check	= UDP_CSUM_DEFAULT,
 	.flags		= INET_PROTOSW_REUSE,
 };
diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c
index da5bd0e..dce699f 100644
--- a/net/ipv6/reassembly.c
+++ b/net/ipv6/reassembly.c
@@ -208,18 +208,17 @@
 	fq_kill(fq);
 
 	net = container_of(fq->q.net, struct net, ipv6.frags);
-	dev = dev_get_by_index(net, fq->iif);
-	if (!dev)
-		goto out;
-
 	rcu_read_lock();
+	dev = dev_get_by_index_rcu(net, fq->iif);
+	if (!dev)
+		goto out_rcu_unlock;
+
 	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMTIMEOUT);
 	IP6_INC_STATS_BH(net, __in6_dev_get(dev), IPSTATS_MIB_REASMFAILS);
-	rcu_read_unlock();
 
 	/* Don't send error if the first segment did not arrive. */
 	if (!(fq->q.last_in & INET_FRAG_FIRST_IN) || !fq->q.fragments)
-		goto out;
+		goto out_rcu_unlock;
 
 	/*
 	   But use as source device on which LAST ARRIVED
@@ -228,9 +227,9 @@
 	 */
 	fq->q.fragments->dev = dev;
 	icmpv6_send(fq->q.fragments, ICMPV6_TIME_EXCEED, ICMPV6_EXC_FRAGTIME, 0, dev);
+out_rcu_unlock:
+	rcu_read_unlock();
 out:
-	if (dev)
-		dev_put(dev);
 	spin_unlock(&fq->q.lock);
 	fq_put(fq);
 }
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index d6fe764..df9432a 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -1471,9 +1471,10 @@
 				},
 			},
 		},
-		.gateway = *gateway,
 	};
 
+	ipv6_addr_copy(&rdfl.gateway, gateway);
+
 	if (rt6_need_strict(dest))
 		flags |= RT6_LOOKUP_F_IFACE;
 
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index dbd19a7..2362a33 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -77,8 +77,17 @@
 	struct net_device *fb_tunnel_dev;
 };
 
-static DEFINE_RWLOCK(ipip6_lock);
+/*
+ * Locking : hash tables are protected by RCU and a spinlock
+ */
+static DEFINE_SPINLOCK(ipip6_lock);
 
+#define for_each_ip_tunnel_rcu(start) \
+	for (t = rcu_dereference(start); t; t = rcu_dereference(t->next))
+
+/*
+ * Must be invoked with rcu_read_lock
+ */
 static struct ip_tunnel * ipip6_tunnel_lookup(struct net *net,
 		struct net_device *dev, __be32 remote, __be32 local)
 {
@@ -87,26 +96,26 @@
 	struct ip_tunnel *t;
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
-	for (t = sitn->tunnels_r_l[h0^h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_r_l[h0 ^ h1]) {
 		if (local == t->parms.iph.saddr &&
 		    remote == t->parms.iph.daddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	for (t = sitn->tunnels_r[h0]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_r[h0]) {
 		if (remote == t->parms.iph.daddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	for (t = sitn->tunnels_l[h1]; t; t = t->next) {
+	for_each_ip_tunnel_rcu(sitn->tunnels_l[h1]) {
 		if (local == t->parms.iph.saddr &&
 		    (!dev || !t->parms.link || dev->iflink == t->parms.link) &&
 		    (t->dev->flags & IFF_UP))
 			return t;
 	}
-	t = sitn->tunnels_wc[0];
+	t = rcu_dereference(sitn->tunnels_wc[0]);
 	if ((t != NULL) && (t->dev->flags & IFF_UP))
 		return t;
 	return NULL;
@@ -143,9 +152,9 @@
 
 	for (tp = ipip6_bucket(sitn, t); *tp; tp = &(*tp)->next) {
 		if (t == *tp) {
-			write_lock_bh(&ipip6_lock);
+			spin_lock_bh(&ipip6_lock);
 			*tp = t->next;
-			write_unlock_bh(&ipip6_lock);
+			spin_unlock_bh(&ipip6_lock);
 			break;
 		}
 	}
@@ -155,10 +164,27 @@
 {
 	struct ip_tunnel **tp = ipip6_bucket(sitn, t);
 
+	spin_lock_bh(&ipip6_lock);
 	t->next = *tp;
-	write_lock_bh(&ipip6_lock);
-	*tp = t;
-	write_unlock_bh(&ipip6_lock);
+	rcu_assign_pointer(*tp, t);
+	spin_unlock_bh(&ipip6_lock);
+}
+
+static void ipip6_tunnel_clone_6rd(struct net_device *dev, struct sit_net *sitn)
+{
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel *t = netdev_priv(dev);
+
+	if (t->dev == sitn->fb_tunnel_dev) {
+		ipv6_addr_set(&t->ip6rd.prefix, htonl(0x20020000), 0, 0, 0);
+		t->ip6rd.relay_prefix = 0;
+		t->ip6rd.prefixlen = 16;
+		t->ip6rd.relay_prefixlen = 0;
+	} else {
+		struct ip_tunnel *t0 = netdev_priv(sitn->fb_tunnel_dev);
+		memcpy(&t->ip6rd, &t0->ip6rd, sizeof(t->ip6rd));
+	}
+#endif
 }
 
 static struct ip_tunnel * ipip6_tunnel_locate(struct net *net,
@@ -204,6 +230,7 @@
 
 	nt->parms = *parms;
 	ipip6_tunnel_init(dev);
+	ipip6_tunnel_clone_6rd(dev, sitn);
 
 	if (parms->i_flags & SIT_ISATAP)
 		dev->priv_flags |= IFF_ISATAP;
@@ -222,15 +249,22 @@
 	return NULL;
 }
 
+static DEFINE_SPINLOCK(ipip6_prl_lock);
+
+#define for_each_prl_rcu(start)			\
+	for (prl = rcu_dereference(start);	\
+	     prl;				\
+	     prl = rcu_dereference(prl->next))
+
 static struct ip_tunnel_prl_entry *
 __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr)
 {
-	struct ip_tunnel_prl_entry *p = (struct ip_tunnel_prl_entry *)NULL;
+	struct ip_tunnel_prl_entry *prl;
 
-	for (p = t->prl; p; p = p->next)
-		if (p->addr == addr)
+	for_each_prl_rcu(t->prl)
+		if (prl->addr == addr)
 			break;
-	return p;
+	return prl;
 
 }
 
@@ -255,7 +289,7 @@
 		kcalloc(cmax, sizeof(*kp), GFP_KERNEL) :
 		NULL;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 
 	ca = t->prl_count < cmax ? t->prl_count : cmax;
 
@@ -273,7 +307,7 @@
 	}
 
 	c = 0;
-	for (prl = t->prl; prl; prl = prl->next) {
+	for_each_prl_rcu(t->prl) {
 		if (c >= cmax)
 			break;
 		if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr)
@@ -285,7 +319,7 @@
 			break;
 	}
 out:
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 
 	len = sizeof(*kp) * c;
 	ret = 0;
@@ -306,12 +340,14 @@
 	if (a->addr == htonl(INADDR_ANY))
 		return -EINVAL;
 
-	write_lock(&ipip6_lock);
+	spin_lock(&ipip6_prl_lock);
 
 	for (p = t->prl; p; p = p->next) {
 		if (p->addr == a->addr) {
-			if (chg)
-				goto update;
+			if (chg) {
+				p->flags = a->flags;
+				goto out;
+			}
 			err = -EEXIST;
 			goto out;
 		}
@@ -328,46 +364,63 @@
 		goto out;
 	}
 
+	INIT_RCU_HEAD(&p->rcu_head);
 	p->next = t->prl;
-	t->prl = p;
-	t->prl_count++;
-update:
 	p->addr = a->addr;
 	p->flags = a->flags;
+	t->prl_count++;
+	rcu_assign_pointer(t->prl, p);
 out:
-	write_unlock(&ipip6_lock);
+	spin_unlock(&ipip6_prl_lock);
 	return err;
 }
 
+static void prl_entry_destroy_rcu(struct rcu_head *head)
+{
+	kfree(container_of(head, struct ip_tunnel_prl_entry, rcu_head));
+}
+
+static void prl_list_destroy_rcu(struct rcu_head *head)
+{
+	struct ip_tunnel_prl_entry *p, *n;
+
+	p = container_of(head, struct ip_tunnel_prl_entry, rcu_head);
+	do {
+		n = p->next;
+		kfree(p);
+		p = n;
+	} while (p);
+}
+
 static int
 ipip6_tunnel_del_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a)
 {
 	struct ip_tunnel_prl_entry *x, **p;
 	int err = 0;
 
-	write_lock(&ipip6_lock);
+	spin_lock(&ipip6_prl_lock);
 
 	if (a && a->addr != htonl(INADDR_ANY)) {
 		for (p = &t->prl; *p; p = &(*p)->next) {
 			if ((*p)->addr == a->addr) {
 				x = *p;
 				*p = x->next;
-				kfree(x);
+				call_rcu(&x->rcu_head, prl_entry_destroy_rcu);
 				t->prl_count--;
 				goto out;
 			}
 		}
 		err = -ENXIO;
 	} else {
-		while (t->prl) {
+		if (t->prl) {
+			t->prl_count = 0;
 			x = t->prl;
-			t->prl = t->prl->next;
-			kfree(x);
-			t->prl_count--;
+			call_rcu(&x->rcu_head, prl_list_destroy_rcu);
+			t->prl = NULL;
 		}
 	}
 out:
-	write_unlock(&ipip6_lock);
+	spin_unlock(&ipip6_prl_lock);
 	return err;
 }
 
@@ -377,7 +430,7 @@
 	struct ip_tunnel_prl_entry *p;
 	int ok = 1;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	p = __ipip6_tunnel_locate_prl(t, iph->saddr);
 	if (p) {
 		if (p->flags & PRL_DEFAULT)
@@ -393,7 +446,7 @@
 		else
 			ok = 0;
 	}
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 	return ok;
 }
 
@@ -403,9 +456,9 @@
 	struct sit_net *sitn = net_generic(net, sit_net_id);
 
 	if (dev == sitn->fb_tunnel_dev) {
-		write_lock_bh(&ipip6_lock);
+		spin_lock_bh(&ipip6_lock);
 		sitn->tunnels_wc[0] = NULL;
-		write_unlock_bh(&ipip6_lock);
+		spin_unlock_bh(&ipip6_lock);
 		dev_put(dev);
 	} else {
 		ipip6_tunnel_unlink(sitn, netdev_priv(dev));
@@ -458,7 +511,7 @@
 
 	err = -ENOENT;
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	t = ipip6_tunnel_lookup(dev_net(skb->dev),
 				skb->dev,
 				iph->daddr,
@@ -476,7 +529,7 @@
 		t->err_count = 1;
 	t->err_time = jiffies;
 out:
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -496,7 +549,7 @@
 
 	iph = ip_hdr(skb);
 
-	read_lock(&ipip6_lock);
+	rcu_read_lock();
 	tunnel = ipip6_tunnel_lookup(dev_net(skb->dev), skb->dev,
 				     iph->saddr, iph->daddr);
 	if (tunnel != NULL) {
@@ -510,7 +563,7 @@
 		if ((tunnel->dev->priv_flags & IFF_ISATAP) &&
 		    !isatap_chksrc(skb, iph, tunnel)) {
 			tunnel->dev->stats.rx_errors++;
-			read_unlock(&ipip6_lock);
+			rcu_read_unlock();
 			kfree_skb(skb);
 			return 0;
 		}
@@ -521,28 +574,52 @@
 		nf_reset(skb);
 		ipip6_ecn_decapsulate(iph, skb);
 		netif_rx(skb);
-		read_unlock(&ipip6_lock);
+		rcu_read_unlock();
 		return 0;
 	}
 
 	icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
-	read_unlock(&ipip6_lock);
+	rcu_read_unlock();
 out:
 	kfree_skb(skb);
 	return 0;
 }
 
-/* Returns the embedded IPv4 address if the IPv6 address
-   comes from 6to4 (RFC 3056) addr space */
-
-static inline __be32 try_6to4(struct in6_addr *v6dst)
+/*
+ * Returns the embedded IPv4 address if the IPv6 address
+ * comes from 6rd / 6to4 (RFC 3056) addr space.
+ */
+static inline
+__be32 try_6rd(struct in6_addr *v6dst, struct ip_tunnel *tunnel)
 {
 	__be32 dst = 0;
 
+#ifdef CONFIG_IPV6_SIT_6RD
+	if (ipv6_prefix_equal(v6dst, &tunnel->ip6rd.prefix,
+			      tunnel->ip6rd.prefixlen)) {
+		unsigned pbw0, pbi0;
+		int pbi1;
+		u32 d;
+
+		pbw0 = tunnel->ip6rd.prefixlen >> 5;
+		pbi0 = tunnel->ip6rd.prefixlen & 0x1f;
+
+		d = (ntohl(v6dst->s6_addr32[pbw0]) << pbi0) >>
+		    tunnel->ip6rd.relay_prefixlen;
+
+		pbi1 = pbi0 - tunnel->ip6rd.relay_prefixlen;
+		if (pbi1 > 0)
+			d |= ntohl(v6dst->s6_addr32[pbw0 + 1]) >>
+			     (32 - pbi1);
+
+		dst = tunnel->ip6rd.relay_prefix | htonl(d);
+	}
+#else
 	if (v6dst->s6_addr16[0] == htons(0x2002)) {
 		/* 6to4 v6 addr has 16 bits prefix, 32 v4addr, 16 SLA, ... */
 		memcpy(&dst, &v6dst->s6_addr16[1], 4);
 	}
+#endif
 	return dst;
 }
 
@@ -555,7 +632,8 @@
 				     struct net_device *dev)
 {
 	struct ip_tunnel *tunnel = netdev_priv(dev);
-	struct net_device_stats *stats = &tunnel->dev->stats;
+	struct net_device_stats *stats = &dev->stats;
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, 0);
 	struct iphdr  *tiph = &tunnel->parms.iph;
 	struct ipv6hdr *iph6 = ipv6_hdr(skb);
 	u8     tos = tunnel->parms.iph.tos;
@@ -595,7 +673,7 @@
 	}
 
 	if (!dst)
-		dst = try_6to4(&iph6->daddr);
+		dst = try_6rd(&iph6->daddr, tunnel);
 
 	if (!dst) {
 		struct neighbour *neigh = NULL;
@@ -688,7 +766,7 @@
 		struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
 		if (!new_skb) {
 			ip_rt_put(rt);
-			stats->tx_dropped++;
+			txq->tx_dropped++;
 			dev_kfree_skb(skb);
 			return NETDEV_TX_OK;
 		}
@@ -785,9 +863,15 @@
 	struct ip_tunnel *t;
 	struct net *net = dev_net(dev);
 	struct sit_net *sitn = net_generic(net, sit_net_id);
+#ifdef CONFIG_IPV6_SIT_6RD
+	struct ip_tunnel_6rd ip6rd;
+#endif
 
 	switch (cmd) {
 	case SIOCGETTUNNEL:
+#ifdef CONFIG_IPV6_SIT_6RD
+	case SIOCGET6RD:
+#endif
 		t = NULL;
 		if (dev == sitn->fb_tunnel_dev) {
 			if (copy_from_user(&p, ifr->ifr_ifru.ifru_data, sizeof(p))) {
@@ -798,9 +882,25 @@
 		}
 		if (t == NULL)
 			t = netdev_priv(dev);
-		memcpy(&p, &t->parms, sizeof(p));
-		if (copy_to_user(ifr->ifr_ifru.ifru_data, &p, sizeof(p)))
-			err = -EFAULT;
+
+		err = -EFAULT;
+		if (cmd == SIOCGETTUNNEL) {
+			memcpy(&p, &t->parms, sizeof(p));
+			if (copy_to_user(ifr->ifr_ifru.ifru_data, &p,
+					 sizeof(p)))
+				goto done;
+#ifdef CONFIG_IPV6_SIT_6RD
+		} else {
+			ipv6_addr_copy(&ip6rd.prefix, &t->ip6rd.prefix);
+			ip6rd.relay_prefix = t->ip6rd.relay_prefix;
+			ip6rd.prefixlen = t->ip6rd.prefixlen;
+			ip6rd.relay_prefixlen = t->ip6rd.relay_prefixlen;
+			if (copy_to_user(ifr->ifr_ifru.ifru_data, &ip6rd,
+					 sizeof(ip6rd)))
+				goto done;
+#endif
+		}
+		err = 0;
 		break;
 
 	case SIOCADDTUNNEL:
@@ -921,6 +1021,54 @@
 		netdev_state_change(dev);
 		break;
 
+#ifdef CONFIG_IPV6_SIT_6RD
+	case SIOCADD6RD:
+	case SIOCCHG6RD:
+	case SIOCDEL6RD:
+		err = -EPERM;
+		if (!capable(CAP_NET_ADMIN))
+			goto done;
+
+		err = -EFAULT;
+		if (copy_from_user(&ip6rd, ifr->ifr_ifru.ifru_data,
+				   sizeof(ip6rd)))
+			goto done;
+
+		t = netdev_priv(dev);
+
+		if (cmd != SIOCDEL6RD) {
+			struct in6_addr prefix;
+			__be32 relay_prefix;
+
+			err = -EINVAL;
+			if (ip6rd.relay_prefixlen > 32 ||
+			    ip6rd.prefixlen + (32 - ip6rd.relay_prefixlen) > 64)
+				goto done;
+
+			ipv6_addr_prefix(&prefix, &ip6rd.prefix,
+					 ip6rd.prefixlen);
+			if (!ipv6_addr_equal(&prefix, &ip6rd.prefix))
+				goto done;
+			if (ip6rd.relay_prefixlen)
+				relay_prefix = ip6rd.relay_prefix &
+					       htonl(0xffffffffUL <<
+						     (32 - ip6rd.relay_prefixlen));
+			else
+				relay_prefix = 0;
+			if (relay_prefix != ip6rd.relay_prefix)
+				goto done;
+
+			ipv6_addr_copy(&t->ip6rd.prefix, &prefix);
+			t->ip6rd.relay_prefix = relay_prefix;
+			t->ip6rd.prefixlen = ip6rd.prefixlen;
+			t->ip6rd.relay_prefixlen = ip6rd.relay_prefixlen;
+		} else
+			ipip6_tunnel_clone_6rd(dev, sitn);
+
+		err = 0;
+		break;
+#endif
+
 	default:
 		err = -EINVAL;
 	}
@@ -997,16 +1145,19 @@
 	.priority	=	1,
 };
 
-static void sit_destroy_tunnels(struct sit_net *sitn)
+static void sit_destroy_tunnels(struct sit_net *sitn, struct list_head *head)
 {
 	int prio;
 
 	for (prio = 1; prio < 4; prio++) {
 		int h;
 		for (h = 0; h < HASH_SIZE; h++) {
-			struct ip_tunnel *t;
-			while ((t = sitn->tunnels[prio][h]) != NULL)
-				unregister_netdevice(t->dev);
+			struct ip_tunnel *t = sitn->tunnels[prio][h];
+
+			while (t != NULL) {
+				unregister_netdevice_queue(t->dev, head);
+				t = t->next;
+			}
 		}
 	}
 }
@@ -1039,6 +1190,7 @@
 	dev_net_set(sitn->fb_tunnel_dev, net);
 
 	ipip6_fb_tunnel_init(sitn->fb_tunnel_dev);
+	ipip6_tunnel_clone_6rd(sitn->fb_tunnel_dev, sitn);
 
 	if ((err = register_netdev(sitn->fb_tunnel_dev)))
 		goto err_reg_dev;
@@ -1059,11 +1211,13 @@
 static void sit_exit_net(struct net *net)
 {
 	struct sit_net *sitn;
+	LIST_HEAD(list);
 
 	sitn = net_generic(net, sit_net_id);
 	rtnl_lock();
-	sit_destroy_tunnels(sitn);
-	unregister_netdevice(sitn->fb_tunnel_dev);
+	sit_destroy_tunnels(sitn, &list);
+	unregister_netdevice_queue(sitn->fb_tunnel_dev, &list);
+	unregister_netdevice_many(&list);
 	rtnl_unlock();
 	kfree(sitn);
 }
@@ -1078,6 +1232,7 @@
 	xfrm4_tunnel_deregister(&sit_handler, AF_INET6);
 
 	unregister_pernet_gen_device(sit_net_id, &sit_net_ops);
+	rcu_barrier(); /* Wait for completion of call_rcu()'s */
 }
 
 static int __init sit_init(void)
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 6b6ae91..612fc53 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -184,13 +184,6 @@
 
 	NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_SYNCOOKIESRECV);
 
-	/* check for timestamp cookie support */
-	memset(&tcp_opt, 0, sizeof(tcp_opt));
-	tcp_parse_options(skb, &tcp_opt, 0);
-
-	if (tcp_opt.saw_tstamp)
-		cookie_check_timestamp(&tcp_opt);
-
 	ret = NULL;
 	req = inet6_reqsk_alloc(&tcp6_request_sock_ops);
 	if (!req)
@@ -224,12 +217,6 @@
 	req->expires = 0UL;
 	req->retrans = 0;
 	ireq->ecn_ok		= 0;
-	ireq->snd_wscale	= tcp_opt.snd_wscale;
-	ireq->rcv_wscale	= tcp_opt.rcv_wscale;
-	ireq->sack_ok		= tcp_opt.sack_ok;
-	ireq->wscale_ok		= tcp_opt.wscale_ok;
-	ireq->tstamp_ok		= tcp_opt.saw_tstamp;
-	req->ts_recent		= tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
 	treq->rcv_isn = ntohl(th->seq) - 1;
 	treq->snt_isn = cookie;
 
@@ -252,8 +239,9 @@
 		}
 		ipv6_addr_copy(&fl.fl6_src, &ireq6->loc_addr);
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
-		fl.fl_ip_sport = inet_sk(sk)->sport;
+		fl.fl_ip_sport = inet_sk(sk)->inet_sport;
 		security_req_classify_flow(req, &fl);
 		if (ip6_dst_lookup(sk, &dst, &fl))
 			goto out_free;
@@ -264,6 +252,21 @@
 			goto out_free;
 	}
 
+	/* check for timestamp cookie support */
+	memset(&tcp_opt, 0, sizeof(tcp_opt));
+	tcp_parse_options(skb, &tcp_opt, 0, dst);
+
+	if (tcp_opt.saw_tstamp)
+		cookie_check_timestamp(&tcp_opt);
+
+	req->ts_recent          = tcp_opt.saw_tstamp ? tcp_opt.rcv_tsval : 0;
+
+	ireq->snd_wscale        = tcp_opt.snd_wscale;
+	ireq->rcv_wscale        = tcp_opt.rcv_wscale;
+	ireq->sack_ok           = tcp_opt.sack_ok;
+	ireq->wscale_ok         = tcp_opt.wscale_ok;
+	ireq->tstamp_ok         = tcp_opt.saw_tstamp;
+
 	req->window_clamp = tp->window_clamp ? :dst_metric(dst, RTAX_WINDOW);
 	tcp_select_initial_window(tcp_full_space(sk), req->mss,
 				  &req->rcv_wnd, &req->window_clamp,
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 21d100b..696a22f 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -226,10 +226,9 @@
 #endif
 			goto failure;
 		} else {
-			ipv6_addr_set(&np->saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->saddr);
-			ipv6_addr_set(&np->rcv_saddr, 0, 0, htonl(0x0000FFFF),
-				      inet->rcv_saddr);
+			ipv6_addr_set_v4mapped(inet->inet_saddr, &np->saddr);
+			ipv6_addr_set_v4mapped(inet->inet_rcv_saddr,
+					       &np->rcv_saddr);
 		}
 
 		return err;
@@ -243,8 +242,9 @@
 	ipv6_addr_copy(&fl.fl6_src,
 		       (saddr ? saddr : &np->saddr));
 	fl.oif = sk->sk_bound_dev_if;
+	fl.mark = sk->sk_mark;
 	fl.fl_ip_dport = usin->sin6_port;
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	if (np->opt && np->opt->srcrt) {
 		struct rt0_hdr *rt0 = (struct rt0_hdr *)np->opt->srcrt;
@@ -276,7 +276,7 @@
 
 	/* set the source address */
 	ipv6_addr_copy(&np->saddr, saddr);
-	inet->rcv_saddr = LOOPBACK4_IPV6;
+	inet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 	sk->sk_gso_type = SKB_GSO_TCPV6;
 	__ip6_dst_store(sk, dst, NULL, NULL);
@@ -288,7 +288,7 @@
 
 	tp->rx_opt.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) - sizeof(struct ipv6hdr);
 
-	inet->dport = usin->sin6_port;
+	inet->inet_dport = usin->sin6_port;
 
 	tcp_set_state(sk, TCP_SYN_SENT);
 	err = inet6_hash_connect(&tcp_death_row, sk);
@@ -298,8 +298,8 @@
 	if (!tp->write_seq)
 		tp->write_seq = secure_tcpv6_sequence_number(np->saddr.s6_addr32,
 							     np->daddr.s6_addr32,
-							     inet->sport,
-							     inet->dport);
+							     inet->inet_sport,
+							     inet->inet_dport);
 
 	err = tcp_connect(sk);
 	if (err)
@@ -311,7 +311,7 @@
 	tcp_set_state(sk, TCP_CLOSE);
 	__sk_dst_reset(sk);
 failure:
-	inet->dport = 0;
+	inet->inet_dport = 0;
 	sk->sk_route_caps = 0;
 	return err;
 }
@@ -383,8 +383,9 @@
 			ipv6_addr_copy(&fl.fl6_dst, &np->daddr);
 			ipv6_addr_copy(&fl.fl6_src, &np->saddr);
 			fl.oif = sk->sk_bound_dev_if;
-			fl.fl_ip_dport = inet->dport;
-			fl.fl_ip_sport = inet->sport;
+			fl.mark = sk->sk_mark;
+			fl.fl_ip_dport = inet->inet_dport;
+			fl.fl_ip_sport = inet->inet_sport;
 			security_skb_classify_flow(skb, &fl);
 
 			if ((err = ip6_dst_lookup(sk, &dst, &fl))) {
@@ -477,6 +478,7 @@
 	ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
 	fl.fl6_flowlabel = 0;
 	fl.oif = treq->iif;
+	fl.mark = sk->sk_mark;
 	fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 	fl.fl_ip_sport = inet_rsk(req)->loc_port;
 	security_req_classify_flow(req, &fl);
@@ -1165,6 +1167,7 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 	struct request_sock *req = NULL;
 	__u32 isn = TCP_SKB_CB(skb)->when;
+	struct dst_entry *dst = __sk_dst_get(sk);
 #ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
 #else
@@ -1203,7 +1206,7 @@
 	tmp_opt.mss_clamp = IPV6_MIN_MTU - sizeof(struct tcphdr) - sizeof(struct ipv6hdr);
 	tmp_opt.user_mss = tp->rx_opt.user_mss;
 
-	tcp_parse_options(skb, &tmp_opt, 0);
+	tcp_parse_options(skb, &tmp_opt, 0, dst);
 
 	if (want_cookie && !tmp_opt.saw_tstamp)
 		tcp_clear_options(&tmp_opt);
@@ -1290,11 +1293,9 @@
 
 		memcpy(newnp, np, sizeof(struct ipv6_pinfo));
 
-		ipv6_addr_set(&newnp->daddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->daddr);
+		ipv6_addr_set_v4mapped(newinet->inet_daddr, &newnp->daddr);
 
-		ipv6_addr_set(&newnp->saddr, 0, 0, htonl(0x0000FFFF),
-			      newinet->saddr);
+		ipv6_addr_set_v4mapped(newinet->inet_saddr, &newnp->saddr);
 
 		ipv6_addr_copy(&newnp->rcv_saddr, &newnp->saddr);
 
@@ -1345,6 +1346,7 @@
 		}
 		ipv6_addr_copy(&fl.fl6_src, &treq->loc_addr);
 		fl.oif = sk->sk_bound_dev_if;
+		fl.mark = sk->sk_mark;
 		fl.fl_ip_dport = inet_rsk(req)->rmt_port;
 		fl.fl_ip_sport = inet_rsk(req)->loc_port;
 		security_req_classify_flow(req, &fl);
@@ -1431,7 +1433,8 @@
 	newtp->advmss = dst_metric(dst, RTAX_ADVMSS);
 	tcp_initialize_rcv_mss(newsk);
 
-	newinet->daddr = newinet->saddr = newinet->rcv_saddr = LOOPBACK4_IPV6;
+	newinet->inet_daddr = newinet->inet_saddr = LOOPBACK4_IPV6;
+	newinet->inet_rcv_saddr = LOOPBACK4_IPV6;
 
 #ifdef CONFIG_TCP_MD5SIG
 	/* Copy over the MD5 key from the original socket */
@@ -1931,8 +1934,8 @@
 
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
-	destp = ntohs(inet->dport);
-	srcp  = ntohs(inet->sport);
+	destp = ntohs(inet->inet_dport);
+	srcp  = ntohs(inet->inet_sport);
 
 	if (icsk->icsk_pending == ICSK_TIME_RETRANS) {
 		timer_active	= 1;
@@ -2109,7 +2112,6 @@
 	.protocol	=	IPPROTO_TCP,
 	.prot		=	&tcpv6_prot,
 	.ops		=	&inet6_stream_ops,
-	.capability	=	-1,
 	.no_check	=	0,
 	.flags		=	INET_PROTOSW_PERMANENT |
 				INET_PROTOSW_ICSK,
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index cf538ed..5bc7cdb 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -53,7 +53,7 @@
 {
 	const struct in6_addr *sk_rcv_saddr6 = &inet6_sk(sk)->rcv_saddr;
 	const struct in6_addr *sk2_rcv_saddr6 = inet6_rcv_saddr(sk2);
-	__be32 sk_rcv_saddr = inet_sk(sk)->rcv_saddr;
+	__be32 sk1_rcv_saddr = inet_sk(sk)->inet_rcv_saddr;
 	__be32 sk2_rcv_saddr = inet_rcv_saddr(sk2);
 	int sk_ipv6only = ipv6_only_sock(sk);
 	int sk2_ipv6only = inet_v6_ipv6only(sk2);
@@ -63,8 +63,8 @@
 	/* if both are mapped, treat as IPv4 */
 	if (addr_type == IPV6_ADDR_MAPPED && addr_type2 == IPV6_ADDR_MAPPED)
 		return (!sk2_ipv6only &&
-			(!sk_rcv_saddr || !sk2_rcv_saddr ||
-			  sk_rcv_saddr == sk2_rcv_saddr));
+			(!sk1_rcv_saddr || !sk2_rcv_saddr ||
+			  sk1_rcv_saddr == sk2_rcv_saddr));
 
 	if (addr_type2 == IPV6_ADDR_ANY &&
 	    !(sk2_ipv6only && addr_type == IPV6_ADDR_MAPPED))
@@ -100,8 +100,8 @@
 		struct inet_sock *inet = inet_sk(sk);
 
 		score = 0;
-		if (inet->dport) {
-			if (inet->dport != sport)
+		if (inet->inet_dport) {
+			if (inet->inet_dport != sport)
 				return -1;
 			score++;
 		}
@@ -132,7 +132,7 @@
 	struct sock *sk, *result;
 	struct hlist_nulls_node *node;
 	unsigned short hnum = ntohs(dport);
-	unsigned int hash = udp_hashfn(net, hnum);
+	unsigned int hash = udp_hashfn(net, hnum, udptable->mask);
 	struct udp_hslot *hslot = &udptable->hash[hash];
 	int score, badness;
 
@@ -252,7 +252,7 @@
 					UDP_MIB_INDATAGRAMS, is_udplite);
 	}
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	/* Copy the address. */
 	if (msg->msg_name) {
@@ -265,8 +265,8 @@
 		sin6->sin6_scope_id = 0;
 
 		if (is_udp4)
-			ipv6_addr_set(&sin6->sin6_addr, 0, 0,
-				      htonl(0xffff), ip_hdr(skb)->saddr);
+			ipv6_addr_set_v4mapped(ip_hdr(skb)->saddr,
+					       &sin6->sin6_addr);
 		else {
 			ipv6_addr_copy(&sin6->sin6_addr,
 				       &ipv6_hdr(skb)->saddr);
@@ -383,18 +383,18 @@
 			goto drop;
 	}
 
-	if ((rc = sock_queue_rcv_skb(sk,skb)) < 0) {
+	if ((rc = sock_queue_rcv_skb(sk, skb)) < 0) {
 		/* Note that an ENOMEM error is charged twice */
-		if (rc == -ENOMEM) {
+		if (rc == -ENOMEM)
 			UDP6_INC_STATS_BH(sock_net(sk),
 					UDP_MIB_RCVBUFERRORS, is_udplite);
-			atomic_inc(&sk->sk_drops);
-		}
-		goto drop;
+		goto drop_no_sk_drops_inc;
 	}
 
 	return 0;
 drop:
+	atomic_inc(&sk->sk_drops);
+drop_no_sk_drops_inc:
 	UDP6_INC_STATS_BH(sock_net(sk), UDP_MIB_INERRORS, is_udplite);
 	kfree_skb(skb);
 	return -1;
@@ -417,8 +417,8 @@
 
 		if (s->sk_hash == num && s->sk_family == PF_INET6) {
 			struct ipv6_pinfo *np = inet6_sk(s);
-			if (inet->dport) {
-				if (inet->dport != rmt_port)
+			if (inet->inet_dport) {
+				if (inet->inet_dport != rmt_port)
 					continue;
 			}
 			if (!ipv6_addr_any(&np->daddr) &&
@@ -450,7 +450,7 @@
 {
 	struct sock *sk, *sk2;
 	const struct udphdr *uh = udp_hdr(skb);
-	struct udp_hslot *hslot = &udptable->hash[udp_hashfn(net, ntohs(uh->dest))];
+	struct udp_hslot *hslot = udp_hashslot(udptable, net, ntohs(uh->dest));
 	int dif;
 
 	spin_lock(&hslot->lock);
@@ -792,7 +792,7 @@
 		if (ipv6_addr_v4mapped(daddr)) {
 			struct sockaddr_in sin;
 			sin.sin_family = AF_INET;
-			sin.sin_port = sin6 ? sin6->sin6_port : inet->dport;
+			sin.sin_port = sin6 ? sin6->sin6_port : inet->inet_dport;
 			sin.sin_addr.s_addr = daddr->s6_addr32[3];
 			msg->msg_name = &sin;
 			msg->msg_namelen = sizeof(sin);
@@ -865,7 +865,7 @@
 		if (sk->sk_state != TCP_ESTABLISHED)
 			return -EDESTADDRREQ;
 
-		fl.fl_ip_dport = inet->dport;
+		fl.fl_ip_dport = inet->inet_dport;
 		daddr = &np->daddr;
 		fl.fl6_flowlabel = np->flow_label;
 		connected = 1;
@@ -877,6 +877,8 @@
 	if (!fl.oif)
 		fl.oif = np->sticky_pktinfo.ipi6_ifindex;
 
+	fl.mark = sk->sk_mark;
+
 	if (msg->msg_controllen) {
 		opt = &opt_space;
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
@@ -909,7 +911,7 @@
 		fl.fl6_dst.s6_addr[15] = 0x1; /* :: means loopback (BSD'ism) */
 	if (ipv6_addr_any(&fl.fl6_src) && !ipv6_addr_any(&np->saddr))
 		ipv6_addr_copy(&fl.fl6_src, &np->saddr);
-	fl.fl_ip_sport = inet->sport;
+	fl.fl_ip_sport = inet->inet_sport;
 
 	/* merge ip6_build_xmit from ip6_output */
 	if (opt && opt->srcrt) {
@@ -1190,10 +1192,10 @@
 
 	dest  = &np->daddr;
 	src   = &np->rcv_saddr;
-	destp = ntohs(inet->dport);
-	srcp  = ntohs(inet->sport);
+	destp = ntohs(inet->inet_dport);
+	srcp  = ntohs(inet->inet_sport);
 	seq_printf(seq,
-		   "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
+		   "%5d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X "
 		   "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n",
 		   bucket,
 		   src->s6_addr32[0], src->s6_addr32[1],
@@ -1282,7 +1284,6 @@
 	.protocol =  IPPROTO_UDP,
 	.prot =      &udpv6_prot,
 	.ops =       &inet6_dgram_ops,
-	.capability =-1,
 	.no_check =  UDP_CSUM_DEFAULT,
 	.flags =     INET_PROTOSW_PERMANENT,
 };
diff --git a/net/ipv6/udplite.c b/net/ipv6/udplite.c
index d737a27..6ea6938 100644
--- a/net/ipv6/udplite.c
+++ b/net/ipv6/udplite.c
@@ -62,7 +62,6 @@
 	.protocol	= IPPROTO_UDPLITE,
 	.prot		= &udplitev6_prot,
 	.ops		= &inet6_dgram_ops,
-	.capability	= -1,
 	.no_check	= 0,
 	.flags		= INET_PROTOSW_PERMANENT,
 };
diff --git a/net/ipv6/xfrm6_tunnel.c b/net/ipv6/xfrm6_tunnel.c
index 81a95c0..438831d 100644
--- a/net/ipv6/xfrm6_tunnel.c
+++ b/net/ipv6/xfrm6_tunnel.c
@@ -23,7 +23,7 @@
  */
 #include <linux/module.h>
 #include <linux/xfrm.h>
-#include <linux/list.h>
+#include <linux/rculist.h>
 #include <net/ip.h>
 #include <net/xfrm.h>
 #include <net/ipv6.h>
@@ -36,14 +36,15 @@
  * per xfrm_address_t.
  */
 struct xfrm6_tunnel_spi {
-	struct hlist_node list_byaddr;
-	struct hlist_node list_byspi;
-	xfrm_address_t addr;
-	u32 spi;
-	atomic_t refcnt;
+	struct hlist_node	list_byaddr;
+	struct hlist_node	list_byspi;
+	xfrm_address_t		addr;
+	u32			spi;
+	atomic_t		refcnt;
+	struct rcu_head		rcu_head;
 };
 
-static DEFINE_RWLOCK(xfrm6_tunnel_spi_lock);
+static DEFINE_SPINLOCK(xfrm6_tunnel_spi_lock);
 
 static u32 xfrm6_tunnel_spi;
 
@@ -107,6 +108,7 @@
 		if (!hlist_empty(&xfrm6_tunnel_spi_byspi[i]))
 			return;
 	}
+	rcu_barrier();
 	kmem_cache_destroy(xfrm6_tunnel_spi_kmem);
 	xfrm6_tunnel_spi_kmem = NULL;
 }
@@ -116,7 +118,7 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	struct hlist_node *pos;
 
-	hlist_for_each_entry(x6spi, pos,
+	hlist_for_each_entry_rcu(x6spi, pos,
 			     &xfrm6_tunnel_spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)],
 			     list_byaddr) {
 		if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0)
@@ -131,10 +133,10 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	u32 spi;
 
-	read_lock_bh(&xfrm6_tunnel_spi_lock);
+	rcu_read_lock_bh();
 	x6spi = __xfrm6_tunnel_spi_lookup(saddr);
 	spi = x6spi ? x6spi->spi : 0;
-	read_unlock_bh(&xfrm6_tunnel_spi_lock);
+	rcu_read_unlock_bh();
 	return htonl(spi);
 }
 
@@ -185,14 +187,15 @@
 	if (!x6spi)
 		goto out;
 
+	INIT_RCU_HEAD(&x6spi->rcu_head);
 	memcpy(&x6spi->addr, saddr, sizeof(x6spi->addr));
 	x6spi->spi = spi;
 	atomic_set(&x6spi->refcnt, 1);
 
-	hlist_add_head(&x6spi->list_byspi, &xfrm6_tunnel_spi_byspi[index]);
+	hlist_add_head_rcu(&x6spi->list_byspi, &xfrm6_tunnel_spi_byspi[index]);
 
 	index = xfrm6_tunnel_spi_hash_byaddr(saddr);
-	hlist_add_head(&x6spi->list_byaddr, &xfrm6_tunnel_spi_byaddr[index]);
+	hlist_add_head_rcu(&x6spi->list_byaddr, &xfrm6_tunnel_spi_byaddr[index]);
 out:
 	return spi;
 }
@@ -202,26 +205,32 @@
 	struct xfrm6_tunnel_spi *x6spi;
 	u32 spi;
 
-	write_lock_bh(&xfrm6_tunnel_spi_lock);
+	spin_lock_bh(&xfrm6_tunnel_spi_lock);
 	x6spi = __xfrm6_tunnel_spi_lookup(saddr);
 	if (x6spi) {
 		atomic_inc(&x6spi->refcnt);
 		spi = x6spi->spi;
 	} else
 		spi = __xfrm6_tunnel_alloc_spi(saddr);
-	write_unlock_bh(&xfrm6_tunnel_spi_lock);
+	spin_unlock_bh(&xfrm6_tunnel_spi_lock);
 
 	return htonl(spi);
 }
 
 EXPORT_SYMBOL(xfrm6_tunnel_alloc_spi);
 
+static void x6spi_destroy_rcu(struct rcu_head *head)
+{
+	kmem_cache_free(xfrm6_tunnel_spi_kmem,
+			container_of(head, struct xfrm6_tunnel_spi, rcu_head));
+}
+
 void xfrm6_tunnel_free_spi(xfrm_address_t *saddr)
 {
 	struct xfrm6_tunnel_spi *x6spi;
 	struct hlist_node *pos, *n;
 
-	write_lock_bh(&xfrm6_tunnel_spi_lock);
+	spin_lock_bh(&xfrm6_tunnel_spi_lock);
 
 	hlist_for_each_entry_safe(x6spi, pos, n,
 				  &xfrm6_tunnel_spi_byaddr[xfrm6_tunnel_spi_hash_byaddr(saddr)],
@@ -229,14 +238,14 @@
 	{
 		if (memcmp(&x6spi->addr, saddr, sizeof(x6spi->addr)) == 0) {
 			if (atomic_dec_and_test(&x6spi->refcnt)) {
-				hlist_del(&x6spi->list_byaddr);
-				hlist_del(&x6spi->list_byspi);
-				kmem_cache_free(xfrm6_tunnel_spi_kmem, x6spi);
+				hlist_del_rcu(&x6spi->list_byaddr);
+				hlist_del_rcu(&x6spi->list_byspi);
+				call_rcu(&x6spi->rcu_head, x6spi_destroy_rcu);
 				break;
 			}
 		}
 	}
-	write_unlock_bh(&xfrm6_tunnel_spi_lock);
+	spin_unlock_bh(&xfrm6_tunnel_spi_lock);
 }
 
 EXPORT_SYMBOL(xfrm6_tunnel_free_spi);
diff --git a/net/ipx/af_ipx.c b/net/ipx/af_ipx.c
index 66c7a20..96d193a 100644
--- a/net/ipx/af_ipx.c
+++ b/net/ipx/af_ipx.c
@@ -1352,7 +1352,8 @@
 	.obj_size = sizeof(struct ipx_sock),
 };
 
-static int ipx_create(struct net *net, struct socket *sock, int protocol)
+static int ipx_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	int rc = -ESOCKTNOSUPPORT;
 	struct sock *sk;
@@ -1927,7 +1928,7 @@
  * Socket family declarations
  */
 
-static struct net_proto_family ipx_family_ops = {
+static const struct net_proto_family ipx_family_ops = {
 	.family		= PF_IPX,
 	.create		= ipx_create,
 	.owner		= THIS_MODULE,
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index dd35641..e73a001 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -61,7 +61,7 @@
 
 #include <net/irda/af_irda.h>
 
-static int irda_create(struct net *net, struct socket *sock, int protocol);
+static int irda_create(struct net *net, struct socket *sock, int protocol, int kern);
 
 static const struct proto_ops irda_stream_ops;
 static const struct proto_ops irda_seqpacket_ops;
@@ -839,7 +839,7 @@
 
 	IRDA_DEBUG(2, "%s()\n", __func__);
 
-	err = irda_create(sock_net(sk), newsock, sk->sk_protocol);
+	err = irda_create(sock_net(sk), newsock, sk->sk_protocol, 0);
 	if (err)
 		return err;
 
@@ -1062,7 +1062,8 @@
  *    Create IrDA socket
  *
  */
-static int irda_create(struct net *net, struct socket *sock, int protocol)
+static int irda_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct irda_sock *self;
@@ -2463,7 +2464,7 @@
 	return 0;
 }
 
-static struct net_proto_family irda_family_ops = {
+static const struct net_proto_family irda_family_ops = {
 	.family = PF_IRDA,
 	.create = irda_create,
 	.owner	= THIS_MODULE,
diff --git a/net/iucv/af_iucv.c b/net/iucv/af_iucv.c
index bada1b9..1e42886 100644
--- a/net/iucv/af_iucv.c
+++ b/net/iucv/af_iucv.c
@@ -428,7 +428,6 @@
 		break;
 
 	default:
-		sock_set_flag(sk, SOCK_ZAPPED);
 		/* nothing to do here */
 		break;
 	}
@@ -482,7 +481,8 @@
 }
 
 /* Create an IUCV socket */
-static int iucv_sock_create(struct net *net, struct socket *sock, int protocol)
+static int iucv_sock_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 
@@ -536,7 +536,7 @@
 	list_add_tail(&iucv_sk(sk)->accept_q, &par->accept_q);
 	spin_unlock_irqrestore(&par->accept_q_lock, flags);
 	iucv_sk(sk)->parent = parent;
-	parent->sk_ack_backlog++;
+	sk_acceptq_added(parent);
 }
 
 void iucv_accept_unlink(struct sock *sk)
@@ -547,7 +547,7 @@
 	spin_lock_irqsave(&par->accept_q_lock, flags);
 	list_del_init(&iucv_sk(sk)->accept_q);
 	spin_unlock_irqrestore(&par->accept_q_lock, flags);
-	iucv_sk(sk)->parent->sk_ack_backlog--;
+	sk_acceptq_removed(iucv_sk(sk)->parent);
 	iucv_sk(sk)->parent = NULL;
 	sock_put(sk);
 }
@@ -1715,7 +1715,7 @@
 	.getsockopt	= iucv_sock_getsockopt,
 };
 
-static struct net_proto_family iucv_sock_family_ops = {
+static const struct net_proto_family iucv_sock_family_ops = {
 	.family	= AF_IUCV,
 	.owner	= THIS_MODULE,
 	.create	= iucv_sock_create,
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 4e98193..86b2c22 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -177,7 +177,8 @@
 	.obj_size = sizeof(struct pfkey_sock),
 };
 
-static int pfkey_create(struct net *net, struct socket *sock, int protocol)
+static int pfkey_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct netns_pfkey *net_pfkey = net_generic(net, pfkey_net_id);
 	struct sock *sk;
@@ -3606,7 +3607,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	err = (flags & MSG_TRUNC) ? skb->len : copied;
 
@@ -3644,7 +3645,7 @@
 	.recvmsg	=	pfkey_recvmsg,
 };
 
-static struct net_proto_family pfkey_family_ops = {
+static const struct net_proto_family pfkey_family_ops = {
 	.family	=	PF_KEY,
 	.create	=	pfkey_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/llc/af_llc.c b/net/llc/af_llc.c
index 7aa4fd1..5266c28 100644
--- a/net/llc/af_llc.c
+++ b/net/llc/af_llc.c
@@ -140,14 +140,17 @@
 
 /**
  *	llc_ui_create - alloc and init a new llc_ui socket
+ *	@net: network namespace (must be default network)
  *	@sock: Socket to initialize and attach allocated sk to.
  *	@protocol: Unused.
+ *	@kern: on behalf of kernel or userspace
  *
  *	Allocate and initialize a new llc_ui socket, validate the user wants a
  *	socket type we have available.
  *	Returns 0 upon success, negative upon failure.
  */
-static int llc_ui_create(struct net *net, struct socket *sock, int protocol)
+static int llc_ui_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	int rc = -ESOCKTNOSUPPORT;
@@ -1092,7 +1095,7 @@
 	return rc;
 }
 
-static struct net_proto_family llc_ui_family_ops = {
+static const struct net_proto_family llc_ui_family_ops = {
 	.family = PF_LLC,
 	.create = llc_ui_create,
 	.owner	= THIS_MODULE,
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index b8295cb..14f10eb 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -184,10 +184,12 @@
 		 * No need to check netif_running since we do not allow
 		 * it to start up with this invalid address.
 		 */
-		if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
+		if (compare_ether_addr(null_addr, ndev->dev_addr) == 0) {
 			memcpy(ndev->dev_addr,
 			       local->hw.wiphy->perm_addr,
 			       ETH_ALEN);
+			memcpy(ndev->perm_addr, ndev->dev_addr, ETH_ALEN);
+		}
 	}
 
 	/*
@@ -312,7 +314,7 @@
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
 
-	netif_tx_start_all_queues(dev);
+	netif_start_queue(dev);
 
 	return 0;
  err_del_interface:
@@ -341,7 +343,7 @@
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_tx_stop_all_queues(dev);
+	netif_stop_queue(dev);
 
 	/*
 	 * Now delete all active aggregation sessions.
@@ -754,10 +756,6 @@
 	return 0;
 }
 
-static struct device_type wiphy_type = {
-	.name	= "wlan",
-};
-
 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 		     struct net_device **new_dev, enum nl80211_iftype type,
 		     struct vif_params *params)
@@ -788,8 +786,8 @@
 		goto fail;
 
 	memcpy(ndev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
+	memcpy(ndev->perm_addr, ndev->dev_addr, ETH_ALEN);
 	SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
-	SET_NETDEV_DEVTYPE(ndev, &wiphy_type);
 
 	/* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */
 	sdata = netdev_priv(ndev);
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index f7364e5..9a73389 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -50,7 +50,7 @@
 	struct ieee80211_local *local = sdata->local;
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 
-	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
+	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 
 	if (local->quiescing) {
 		set_bit(TMR_RUNNING_HK, &ifmsh->timers_running);
@@ -480,7 +480,7 @@
 	struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
 	struct ieee80211_local *local = sdata->local;
 
-	ifmsh->wrkq_flags |= MESH_WORK_HOUSEKEEPING;
+	set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
 	ieee80211_queue_work(&local->hw, &ifmsh->work);
 	sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL;
 	ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON |
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index dc5049d..dcc14e9 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -458,9 +458,15 @@
 	mgmt->u.deauth.reason_code = cpu_to_le16(reason);
 
 	if (stype == IEEE80211_STYPE_DEAUTH)
-		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, cookie);
+		if (cookie)
+			__cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
+		else
+			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 	else
-		cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len, cookie);
+		if (cookie)
+			__cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
+		else
+			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
 	ieee80211_tx_skb(sdata, skb, ifmgd->flags & IEEE80211_STA_MFP_ENABLED);
 }
 
@@ -923,7 +929,7 @@
 	ieee80211_recalc_ps(local, -1);
 	mutex_unlock(&local->iflist_mtx);
 
-	netif_tx_start_all_queues(sdata->dev);
+	netif_start_queue(sdata->dev);
 	netif_carrier_on(sdata->dev);
 }
 
@@ -1055,7 +1061,7 @@
 	 * time -- we don't want the scan code to enable queues.
 	 */
 
-	netif_tx_stop_all_queues(sdata->dev);
+	netif_stop_queue(sdata->dev);
 	netif_carrier_off(sdata->dev);
 
 	rcu_read_lock();
@@ -1958,12 +1964,10 @@
 			/* no action */
 			break;
 		case RX_MGMT_CFG80211_DEAUTH:
-			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len,
-					     NULL);
+			cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 			break;
 		case RX_MGMT_CFG80211_DISASSOC:
-			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len,
-					       NULL);
+			cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
 			break;
 		default:
 			WARN(1, "unexpected: %d", rma);
@@ -2018,7 +2022,7 @@
 		cfg80211_send_rx_assoc(sdata->dev, (u8 *) mgmt, skb->len);
 		break;
 	case RX_MGMT_CFG80211_DEAUTH:
-		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len, NULL);
+		cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
 		break;
 	default:
 		WARN(1, "unexpected: %d", rma);
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7170bf4..5c385e3 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1504,19 +1504,28 @@
 		/* illegal frame */
 		return RX_DROP_MONITOR;
 
-	if (!is_multicast_ether_addr(hdr->addr1) &&
-			(mesh_hdr->flags & MESH_FLAGS_AE_A5_A6)) {
+	if (mesh_hdr->flags & MESH_FLAGS_AE) {
 		struct mesh_path *mppath;
+		char *proxied_addr;
+		char *mpp_addr;
+
+		if (is_multicast_ether_addr(hdr->addr1)) {
+			mpp_addr = hdr->addr3;
+			proxied_addr = mesh_hdr->eaddr1;
+		} else {
+			mpp_addr = hdr->addr4;
+			proxied_addr = mesh_hdr->eaddr2;
+		}
 
 		rcu_read_lock();
-		mppath = mpp_path_lookup(mesh_hdr->eaddr2, sdata);
+		mppath = mpp_path_lookup(proxied_addr, sdata);
 		if (!mppath) {
-			mpp_path_add(mesh_hdr->eaddr2, hdr->addr4, sdata);
+			mpp_path_add(proxied_addr, mpp_addr, sdata);
 		} else {
 			spin_lock_bh(&mppath->state_lock);
 			mppath->exp_time = jiffies;
-			if (compare_ether_addr(mppath->mpp, hdr->addr4) != 0)
-				memcpy(mppath->mpp, hdr->addr4, ETH_ALEN);
+			if (compare_ether_addr(mppath->mpp, mpp_addr) != 0)
+				memcpy(mppath->mpp, mpp_addr, ETH_ALEN);
 			spin_unlock_bh(&mppath->state_lock);
 		}
 		rcu_read_unlock();
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 71e10ca..7a350d2 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -306,10 +306,10 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated) {
 				ieee80211_scan_ps_disable(sdata);
-				netif_tx_wake_all_queues(sdata->dev);
+				netif_wake_queue(sdata->dev);
 			}
 		} else
-			netif_tx_wake_all_queues(sdata->dev);
+			netif_wake_queue(sdata->dev);
 
 		/* re-enable beaconing */
 		if (sdata->vif.type == NL80211_IFTYPE_AP ||
@@ -364,7 +364,7 @@
 		 * are handled in the scan state machine
 		 */
 		if (sdata->vif.type != NL80211_IFTYPE_STATION)
-			netif_tx_stop_all_queues(sdata->dev);
+			netif_stop_queue(sdata->dev);
 	}
 	mutex_unlock(&local->iflist_mtx);
 
@@ -523,7 +523,7 @@
 			continue;
 
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
-			netif_tx_stop_all_queues(sdata->dev);
+			netif_stop_queue(sdata->dev);
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_enable(sdata);
 		}
@@ -558,7 +558,7 @@
 		if (sdata->vif.type == NL80211_IFTYPE_STATION) {
 			if (sdata->u.mgd.associated)
 				ieee80211_scan_ps_disable(sdata);
-			netif_tx_wake_all_queues(sdata->dev);
+			netif_wake_queue(sdata->dev);
 		}
 	}
 	mutex_unlock(&local->iflist_mtx);
diff --git a/net/netfilter/xt_socket.c b/net/netfilter/xt_socket.c
index ebf00ad..362afbd 100644
--- a/net/netfilter/xt_socket.c
+++ b/net/netfilter/xt_socket.c
@@ -149,7 +149,7 @@
 
 		/* Ignore sockets listening on INADDR_ANY */
 		wildcard = (sk->sk_state != TCP_TIME_WAIT &&
-			    inet_sk(sk)->rcv_saddr == 0);
+			    inet_sk(sk)->inet_rcv_saddr == 0);
 
 		/* Ignore non-transparent sockets,
 		   if XT_SOCKET_TRANSPARENT is used */
diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c
index fb357f0..3dfe2ba 100644
--- a/net/netlabel/netlabel_unlabeled.c
+++ b/net/netlabel/netlabel_unlabeled.c
@@ -472,13 +472,12 @@
 
 	rcu_read_lock();
 	if (dev_name != NULL) {
-		dev = dev_get_by_name(net, dev_name);
+		dev = dev_get_by_name_rcu(net, dev_name);
 		if (dev == NULL) {
 			ret_val = -ENODEV;
 			goto unlhsh_add_return;
 		}
 		ifindex = dev->ifindex;
-		dev_put(dev);
 		iface = netlbl_unlhsh_search_iface(ifindex);
 	} else {
 		ifindex = 0;
@@ -737,13 +736,12 @@
 
 	rcu_read_lock();
 	if (dev_name != NULL) {
-		dev = dev_get_by_name(net, dev_name);
+		dev = dev_get_by_name_rcu(net, dev_name);
 		if (dev == NULL) {
 			ret_val = -ENODEV;
 			goto unlhsh_remove_return;
 		}
 		iface = netlbl_unlhsh_search_iface(dev->ifindex);
-		dev_put(dev);
 	} else
 		iface = rcu_dereference(netlbl_unlhsh_def);
 	if (iface == NULL) {
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 19e9800..aea805c 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -428,7 +428,8 @@
 	return 0;
 }
 
-static int netlink_create(struct net *net, struct socket *sock, int protocol)
+static int netlink_create(struct net *net, struct socket *sock, int protocol,
+			  int kern)
 {
 	struct module *module = NULL;
 	struct mutex *cb_mutex;
@@ -2050,7 +2051,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static struct net_proto_family netlink_family_ops = {
+static const struct net_proto_family netlink_family_ops = {
 	.family = PF_NETLINK,
 	.create = netlink_create,
 	.owner	= THIS_MODULE,	/* for consistency 8) */
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index 44ff3f3..d07ecda 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -97,25 +97,17 @@
 */
 static inline u16 genl_generate_id(void)
 {
-	static u16 id_gen_idx;
-	int overflowed = 0;
+	static u16 id_gen_idx = GENL_MIN_ID;
+	int i;
 
-	do {
-		if (id_gen_idx == 0)
+	for (i = 0; i <= GENL_MAX_ID - GENL_MIN_ID; i++) {
+		if (!genl_family_find_byid(id_gen_idx))
+			return id_gen_idx;
+		if (++id_gen_idx > GENL_MAX_ID)
 			id_gen_idx = GENL_MIN_ID;
+	}
 
-		if (++id_gen_idx > GENL_MAX_ID) {
-			if (!overflowed) {
-				overflowed = 1;
-				id_gen_idx = 0;
-				continue;
-			} else
-				return 0;
-		}
-
-	} while (genl_family_find_byid(id_gen_idx));
-
-	return id_gen_idx;
+	return 0;
 }
 
 static struct genl_multicast_group notify_grp;
@@ -374,11 +366,6 @@
 		goto errout_locked;
 	}
 
-	if (genl_family_find_byid(family->id)) {
-		err = -EEXIST;
-		goto errout_locked;
-	}
-
 	if (family->id == GENL_ID_GENERATE) {
 		u16 newid = genl_generate_id();
 
@@ -388,6 +375,9 @@
 		}
 
 		family->id = newid;
+	} else if (genl_family_find_byid(family->id)) {
+		err = -EEXIST;
+		goto errout_locked;
 	}
 
 	if (family->maxattr) {
diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c
index 7a83495..4bdd569 100644
--- a/net/netrom/af_netrom.c
+++ b/net/netrom/af_netrom.c
@@ -425,7 +425,8 @@
 	.obj_size = sizeof(struct nr_sock),
 };
 
-static int nr_create(struct net *net, struct socket *sock, int protocol)
+static int nr_create(struct net *net, struct socket *sock, int protocol,
+		     int kern)
 {
 	struct sock *sk;
 	struct nr_sock *nr;
@@ -1372,7 +1373,7 @@
 };
 #endif	/* CONFIG_PROC_FS */
 
-static struct net_proto_family nr_family_ops = {
+static const struct net_proto_family nr_family_ops = {
 	.family		=	PF_NETROM,
 	.create		=	nr_create,
 	.owner		=	THIS_MODULE,
diff --git a/net/netrom/nr_route.c b/net/netrom/nr_route.c
index 4eb1ac9..aacba76 100644
--- a/net/netrom/nr_route.c
+++ b/net/netrom/nr_route.c
@@ -597,15 +597,15 @@
 {
 	struct net_device *dev, *first = NULL;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM)
 			if (first == NULL || strncmp(dev->name, first->name, 3) < 0)
 				first = dev;
 	}
 	if (first)
 		dev_hold(first);
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	return first;
 }
@@ -617,16 +617,17 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
-		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM && ax25cmp(addr, (ax25_address *)dev->dev_addr) == 0) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
+		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_NETROM &&
+		    ax25cmp(addr, (ax25_address *)dev->dev_addr) == 0) {
 			dev_hold(dev);
 			goto out;
 		}
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 48b18da..3304caa 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -79,6 +79,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
+#include <linux/if_vlan.h>
 
 #ifdef CONFIG_INET
 #include <net/inet_common.h>
@@ -188,7 +189,6 @@
 	struct packet_ring_buffer	tx_ring;
 	int			copy_thresh;
 #endif
-	struct packet_type	prot_hook;
 	spinlock_t		bind_lock;
 	struct mutex		pg_vec_lock;
 	unsigned int		running:1,	/* prot_hook is attached*/
@@ -204,6 +204,7 @@
 	unsigned int		tp_reserve;
 	unsigned int		tp_loss:1;
 #endif
+	struct packet_type	prot_hook ____cacheline_aligned_in_smp;
 };
 
 struct packet_skb_cb {
@@ -436,7 +437,8 @@
 	 */
 
 	saddr->spkt_device[13] = 0;
-	dev = dev_get_by_name(sock_net(sk), saddr->spkt_device);
+	rcu_read_lock();
+	dev = dev_get_by_name_rcu(sock_net(sk), saddr->spkt_device);
 	err = -ENODEV;
 	if (dev == NULL)
 		goto out_unlock;
@@ -490,6 +492,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = sk->sk_priority;
+	skb->mark = sk->sk_mark;
 	if (err)
 		goto out_free;
 
@@ -498,14 +501,13 @@
 	 */
 
 	dev_queue_xmit(skb);
-	dev_put(dev);
+	rcu_read_unlock();
 	return len;
 
 out_free:
 	kfree_skb(skb);
 out_unlock:
-	if (dev)
-		dev_put(dev);
+	rcu_read_unlock();
 	return err;
 }
 
@@ -626,15 +628,14 @@
 
 	spin_lock(&sk->sk_receive_queue.lock);
 	po->stats.tp_packets++;
+	skb->dropcount = atomic_read(&sk->sk_drops);
 	__skb_queue_tail(&sk->sk_receive_queue, skb);
 	spin_unlock(&sk->sk_receive_queue.lock);
 	sk->sk_data_ready(sk, skb->len);
 	return 0;
 
 drop_n_acct:
-	spin_lock(&sk->sk_receive_queue.lock);
-	po->stats.tp_drops++;
-	spin_unlock(&sk->sk_receive_queue.lock);
+	po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
 
 drop_n_restore:
 	if (skb_head != skb->data && skb_shared(skb)) {
@@ -766,7 +767,7 @@
 			getnstimeofday(&ts);
 		h.h2->tp_sec = ts.tv_sec;
 		h.h2->tp_nsec = ts.tv_nsec;
-		h.h2->tp_vlan_tci = skb->vlan_tci;
+		h.h2->tp_vlan_tci = vlan_tx_tag_get(skb);
 		hdrlen = sizeof(*h.h2);
 		break;
 	default:
@@ -856,6 +857,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = po->sk.sk_priority;
+	skb->mark = po->sk.sk_mark;
 	skb_shinfo(skb)->destructor_arg = ph.raw;
 
 	switch (po->tp_version) {
@@ -1122,6 +1124,7 @@
 	skb->protocol = proto;
 	skb->dev = dev;
 	skb->priority = sk->sk_priority;
+	skb->mark = sk->sk_mark;
 
 	/*
 	 *	Now send it
@@ -1341,7 +1344,8 @@
  *	Create a packet of type SOCK_PACKET.
  */
 
-static int packet_create(struct net *net, struct socket *sock, int protocol)
+static int packet_create(struct net *net, struct socket *sock, int protocol,
+			 int kern)
 {
 	struct sock *sk;
 	struct packet_sock *po;
@@ -1472,7 +1476,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 
 	if (msg->msg_name)
 		memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa,
@@ -1488,7 +1492,7 @@
 		aux.tp_snaplen = skb->len;
 		aux.tp_mac = 0;
 		aux.tp_net = skb_network_offset(skb);
-		aux.tp_vlan_tci = skb->vlan_tci;
+		aux.tp_vlan_tci = vlan_tx_tag_get(skb);
 
 		put_cmsg(msg, SOL_PACKET, PACKET_AUXDATA, sizeof(aux), &aux);
 	}
@@ -1515,12 +1519,13 @@
 		return -EOPNOTSUPP;
 
 	uaddr->sa_family = AF_PACKET;
-	dev = dev_get_by_index(sock_net(sk), pkt_sk(sk)->ifindex);
-	if (dev) {
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), pkt_sk(sk)->ifindex);
+	if (dev)
 		strlcpy(uaddr->sa_data, dev->name, 15);
-		dev_put(dev);
-	} else
+	else
 		memset(uaddr->sa_data, 0, 14);
+	rcu_read_unlock();
 	*uaddr_len = sizeof(*uaddr);
 
 	return 0;
@@ -1540,16 +1545,17 @@
 	sll->sll_family = AF_PACKET;
 	sll->sll_ifindex = po->ifindex;
 	sll->sll_protocol = po->num;
-	dev = dev_get_by_index(sock_net(sk), po->ifindex);
+	rcu_read_lock();
+	dev = dev_get_by_index_rcu(sock_net(sk), po->ifindex);
 	if (dev) {
 		sll->sll_hatype = dev->type;
 		sll->sll_halen = dev->addr_len;
 		memcpy(sll->sll_addr, dev->dev_addr, dev->addr_len);
-		dev_put(dev);
 	} else {
 		sll->sll_hatype = 0;	/* Bad: we have no ARPHRD_UNSPEC */
 		sll->sll_halen = 0;
 	}
+	rcu_read_unlock();
 	*uaddr_len = offsetof(struct sockaddr_ll, sll_addr) + sll->sll_halen;
 
 	return 0;
@@ -1659,11 +1665,9 @@
 			if (--ml->count == 0) {
 				struct net_device *dev;
 				*mlp = ml->next;
-				dev = dev_get_by_index(sock_net(sk), ml->ifindex);
-				if (dev) {
+				dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
+				if (dev)
 					packet_dev_mc(dev, ml, -1);
-					dev_put(dev);
-				}
 				kfree(ml);
 			}
 			rtnl_unlock();
@@ -1687,11 +1691,9 @@
 		struct net_device *dev;
 
 		po->mclist = ml->next;
-		dev = dev_get_by_index(sock_net(sk), ml->ifindex);
-		if (dev != NULL) {
+		dev = __dev_get_by_index(sock_net(sk), ml->ifindex);
+		if (dev != NULL)
 			packet_dev_mc(dev, ml, -1);
-			dev_put(dev);
-		}
 		kfree(ml);
 	}
 	rtnl_unlock();
@@ -2081,7 +2083,7 @@
 		atomic_dec(&pkt_sk(sk)->mapped);
 }
 
-static struct vm_operations_struct packet_mmap_ops = {
+static const struct vm_operations_struct packet_mmap_ops = {
 	.open	=	packet_mm_open,
 	.close	=	packet_mm_close,
 };
@@ -2360,7 +2362,7 @@
 	.sendpage =	sock_no_sendpage,
 };
 
-static struct net_proto_family packet_family_ops = {
+static const struct net_proto_family packet_family_ops = {
 	.family =	PF_PACKET,
 	.create =	packet_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c
index f60c0c2..3bd1be6 100644
--- a/net/phonet/af_phonet.c
+++ b/net/phonet/af_phonet.c
@@ -60,7 +60,8 @@
 
 /* protocol family functions */
 
-static int pn_socket_create(struct net *net, struct socket *sock, int protocol)
+static int pn_socket_create(struct net *net, struct socket *sock, int protocol,
+			    int kern)
 {
 	struct sock *sk;
 	struct pn_sock *pn;
@@ -118,7 +119,7 @@
 	return err;
 }
 
-static struct net_proto_family phonet_proto_family = {
+static const struct net_proto_family phonet_proto_family = {
 	.family = PF_PHONET,
 	.create = pn_socket_create,
 	.owner = THIS_MODULE,
@@ -190,9 +191,8 @@
 	skb->priority = 0;
 	skb->dev = dev;
 
-	if (pn_addr(src) == pn_addr(dst)) {
+	if (skb->pkt_type == PACKET_LOOPBACK) {
 		skb_reset_mac_header(skb);
-		skb->pkt_type = PACKET_LOOPBACK;
 		skb_orphan(skb);
 		if (irq)
 			netif_rx(skb);
@@ -222,6 +222,9 @@
 	if (skb == NULL)
 		return -ENOMEM;
 
+	if (phonet_address_lookup(dev_net(dev), pn_addr(dst)) == 0)
+		skb->pkt_type = PACKET_LOOPBACK;
+
 	skb_reserve(skb, MAX_PHONET_HEADER);
 	__skb_put(skb, len);
 	skb_copy_to_linear_data(skb, data, len);
@@ -235,6 +238,7 @@
 int pn_skb_send(struct sock *sk, struct sk_buff *skb,
 		const struct sockaddr_pn *target)
 {
+	struct net *net = sock_net(sk);
 	struct net_device *dev;
 	struct pn_sock *pn = pn_sk(sk);
 	int err;
@@ -243,9 +247,13 @@
 
 	err = -EHOSTUNREACH;
 	if (sk->sk_bound_dev_if)
-		dev = dev_get_by_index(sock_net(sk), sk->sk_bound_dev_if);
-	else
-		dev = phonet_device_get(sock_net(sk));
+		dev = dev_get_by_index(net, sk->sk_bound_dev_if);
+	else if (phonet_address_lookup(net, daddr) == 0) {
+		dev = phonet_device_get(net);
+		skb->pkt_type = PACKET_LOOPBACK;
+	} else
+		dev = phonet_route_output(net, daddr);
+
 	if (!dev || !(dev->flags & IFF_UP))
 		goto drop;
 
@@ -369,6 +377,12 @@
 
 	pn_skb_get_dst_sockaddr(skb, &sa);
 
+	/* check if this is broadcasted */
+	if (pn_sockaddr_get_addr(&sa) == PNADDR_BROADCAST) {
+		pn_deliver_sock_broadcast(net, skb);
+		goto out;
+	}
+
 	/* check if we are the destination */
 	if (phonet_address_lookup(net, pn_sockaddr_get_addr(&sa)) == 0) {
 		/* Phonet packet input */
@@ -381,6 +395,38 @@
 			send_obj_unreachable(skb);
 			send_reset_indications(skb);
 		}
+	} else if (unlikely(skb->pkt_type == PACKET_LOOPBACK))
+		goto out; /* Race between address deletion and loopback */
+	else {
+		/* Phonet packet routing */
+		struct net_device *out_dev;
+
+		out_dev = phonet_route_output(net, pn_sockaddr_get_addr(&sa));
+		if (!out_dev) {
+			LIMIT_NETDEBUG(KERN_WARNING"No Phonet route to %02X\n",
+					pn_sockaddr_get_addr(&sa));
+			goto out;
+		}
+
+		__skb_push(skb, sizeof(struct phonethdr));
+		skb->dev = out_dev;
+		if (out_dev == dev) {
+			LIMIT_NETDEBUG(KERN_ERR"Phonet loop to %02X on %s\n",
+					pn_sockaddr_get_addr(&sa), dev->name);
+			goto out_dev;
+		}
+		/* Some drivers (e.g. TUN) do not allocate HW header space */
+		if (skb_cow_head(skb, out_dev->hard_header_len))
+			goto out_dev;
+
+		if (dev_hard_header(skb, out_dev, ETH_P_PHONET, NULL, NULL,
+					skb->len) < 0)
+			goto out_dev;
+		dev_queue_xmit(skb);
+		dev_put(out_dev);
+		return NET_RX_SUCCESS;
+out_dev:
+		dev_put(out_dev);
 	}
 
 out:
diff --git a/net/phonet/datagram.c b/net/phonet/datagram.c
index ef5c75c..67f072e 100644
--- a/net/phonet/datagram.c
+++ b/net/phonet/datagram.c
@@ -159,11 +159,9 @@
 static int pn_backlog_rcv(struct sock *sk, struct sk_buff *skb)
 {
 	int err = sock_queue_rcv_skb(sk, skb);
-	if (err < 0) {
+
+	if (err < 0)
 		kfree_skb(skb);
-		if (err == -ENOMEM)
-			atomic_inc(&sk->sk_drops);
-	}
 	return err ? NET_RX_DROP : NET_RX_SUCCESS;
 }
 
diff --git a/net/phonet/pep.c b/net/phonet/pep.c
index 5f32d21..cbaa1d6 100644
--- a/net/phonet/pep.c
+++ b/net/phonet/pep.c
@@ -360,8 +360,6 @@
 			err = sock_queue_rcv_skb(sk, skb);
 			if (!err)
 				return 0;
-			if (err == -ENOMEM)
-				atomic_inc(&sk->sk_drops);
 			break;
 		}
 
diff --git a/net/phonet/pn_dev.c b/net/phonet/pn_dev.c
index 5f42f30..6d64fda 100644
--- a/net/phonet/pn_dev.c
+++ b/net/phonet/pn_dev.c
@@ -33,8 +33,14 @@
 #include <net/netns/generic.h>
 #include <net/phonet/pn_dev.h>
 
+struct phonet_routes {
+	spinlock_t		lock;
+	struct net_device	*table[64];
+};
+
 struct phonet_net {
 	struct phonet_device_list pndevs;
+	struct phonet_routes routes;
 };
 
 int phonet_net_id;
@@ -154,10 +160,11 @@
 }
 
 /* Gets a source address toward a destination, through a interface. */
-u8 phonet_address_get(struct net_device *dev, u8 addr)
+u8 phonet_address_get(struct net_device *dev, u8 daddr)
 {
 	struct phonet_device_list *pndevs = phonet_device_list(dev_net(dev));
 	struct phonet_device *pnd;
+	u8 saddr;
 
 	spin_lock_bh(&pndevs->lock);
 	pnd = __phonet_get(dev);
@@ -165,12 +172,26 @@
 		BUG_ON(bitmap_empty(pnd->addrs, 64));
 
 		/* Use same source address as destination, if possible */
-		if (!test_bit(addr >> 2, pnd->addrs))
-			addr = find_first_bit(pnd->addrs, 64) << 2;
+		if (test_bit(daddr >> 2, pnd->addrs))
+			saddr = daddr;
+		else
+			saddr = find_first_bit(pnd->addrs, 64) << 2;
 	} else
-		addr = PN_NO_ADDR;
+		saddr = PN_NO_ADDR;
 	spin_unlock_bh(&pndevs->lock);
-	return addr;
+
+	if (saddr == PN_NO_ADDR) {
+		/* Fallback to another device */
+		struct net_device *def_dev;
+
+		def_dev = phonet_device_get(dev_net(dev));
+		if (def_dev) {
+			if (def_dev != dev)
+				saddr = phonet_address_get(def_dev, daddr);
+			dev_put(def_dev);
+		}
+	}
+	return saddr;
 }
 
 int phonet_address_lookup(struct net *net, u8 addr)
@@ -219,6 +240,27 @@
 	return 0;
 }
 
+static void phonet_route_autodel(struct net_device *dev)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	unsigned i;
+	DECLARE_BITMAP(deleted, 64);
+
+	/* Remove left-over Phonet routes */
+	bitmap_zero(deleted, 64);
+	spin_lock_bh(&pnn->routes.lock);
+	for (i = 0; i < 64; i++)
+		if (dev == pnn->routes.table[i]) {
+			set_bit(i, deleted);
+			pnn->routes.table[i] = NULL;
+			dev_put(dev);
+		}
+	spin_unlock_bh(&pnn->routes.lock);
+	for (i = find_first_bit(deleted, 64); i < 64;
+			i = find_next_bit(deleted, 64, i + 1))
+		rtm_phonet_notify(RTM_DELROUTE, dev, i);
+}
+
 /* notify Phonet of device events */
 static int phonet_device_notify(struct notifier_block *me, unsigned long what,
 				void *arg)
@@ -232,6 +274,7 @@
 		break;
 	case NETDEV_UNREGISTER:
 		phonet_device_destroy(dev);
+		phonet_route_autodel(dev);
 		break;
 	}
 	return 0;
@@ -246,7 +289,7 @@
 /* Per-namespace Phonet devices handling */
 static int phonet_init_net(struct net *net)
 {
-	struct phonet_net *pnn = kmalloc(sizeof(*pnn), GFP_KERNEL);
+	struct phonet_net *pnn = kzalloc(sizeof(*pnn), GFP_KERNEL);
 	if (!pnn)
 		return -ENOMEM;
 
@@ -257,6 +300,7 @@
 
 	INIT_LIST_HEAD(&pnn->pndevs.list);
 	spin_lock_init(&pnn->pndevs.lock);
+	spin_lock_init(&pnn->routes.lock);
 	net_assign_generic(net, phonet_net_id, pnn);
 	return 0;
 }
@@ -265,10 +309,19 @@
 {
 	struct phonet_net *pnn = net_generic(net, phonet_net_id);
 	struct net_device *dev;
+	unsigned i;
 
 	rtnl_lock();
 	for_each_netdev(net, dev)
 		phonet_device_destroy(dev);
+
+	for (i = 0; i < 64; i++) {
+		dev = pnn->routes.table[i];
+		if (dev) {
+			rtm_phonet_notify(RTM_DELROUTE, dev, i);
+			dev_put(dev);
+		}
+	}
 	rtnl_unlock();
 
 	proc_net_remove(net, "phonet");
@@ -300,3 +353,69 @@
 	unregister_netdevice_notifier(&phonet_device_notifier);
 	unregister_pernet_gen_device(phonet_net_id, &phonet_net_ops);
 }
+
+int phonet_route_add(struct net_device *dev, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	int err = -EEXIST;
+
+	daddr = daddr >> 2;
+	spin_lock_bh(&routes->lock);
+	if (routes->table[daddr] == NULL) {
+		routes->table[daddr] = dev;
+		dev_hold(dev);
+		err = 0;
+	}
+	spin_unlock_bh(&routes->lock);
+	return err;
+}
+
+int phonet_route_del(struct net_device *dev, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(dev_net(dev), phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	int err = -ENOENT;
+
+	daddr = daddr >> 2;
+	spin_lock_bh(&routes->lock);
+	if (dev == routes->table[daddr]) {
+		routes->table[daddr] = NULL;
+		dev_put(dev);
+		err = 0;
+	}
+	spin_unlock_bh(&routes->lock);
+	return err;
+}
+
+struct net_device *phonet_route_get(struct net *net, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(net, phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	struct net_device *dev;
+
+	ASSERT_RTNL(); /* no need to hold the device */
+
+	daddr >>= 2;
+	spin_lock_bh(&routes->lock);
+	dev = routes->table[daddr];
+	spin_unlock_bh(&routes->lock);
+	return dev;
+}
+
+struct net_device *phonet_route_output(struct net *net, u8 daddr)
+{
+	struct phonet_net *pnn = net_generic(net, phonet_net_id);
+	struct phonet_routes *routes = &pnn->routes;
+	struct net_device *dev;
+
+	spin_lock_bh(&routes->lock);
+	dev = routes->table[daddr >> 2];
+	if (dev)
+		dev_hold(dev);
+	spin_unlock_bh(&routes->lock);
+
+	if (!dev)
+		dev = phonet_device_get(net); /* Default route */
+	return dev;
+}
diff --git a/net/phonet/pn_netlink.c b/net/phonet/pn_netlink.c
index d21fd35..609e509 100644
--- a/net/phonet/pn_netlink.c
+++ b/net/phonet/pn_netlink.c
@@ -29,6 +29,8 @@
 #include <net/sock.h>
 #include <net/phonet/pn_dev.h>
 
+/* Device address handling */
+
 static int fill_addr(struct sk_buff *skb, struct net_device *dev, u8 addr,
 		     u32 pid, u32 seq, int event);
 
@@ -51,8 +53,7 @@
 		    RTNLGRP_PHONET_IFADDR, NULL, GFP_KERNEL);
 	return;
 errout:
-	if (err < 0)
-		rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_IFADDR, err);
+	rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_IFADDR, err);
 }
 
 static const struct nla_policy ifa_phonet_policy[IFA_MAX+1] = {
@@ -160,6 +161,130 @@
 	return skb->len;
 }
 
+/* Routes handling */
+
+static int fill_route(struct sk_buff *skb, struct net_device *dev, u8 dst,
+			u32 pid, u32 seq, int event)
+{
+	struct rtmsg *rtm;
+	struct nlmsghdr *nlh;
+
+	nlh = nlmsg_put(skb, pid, seq, event, sizeof(*rtm), 0);
+	if (nlh == NULL)
+		return -EMSGSIZE;
+
+	rtm = nlmsg_data(nlh);
+	rtm->rtm_family = AF_PHONET;
+	rtm->rtm_dst_len = 6;
+	rtm->rtm_src_len = 0;
+	rtm->rtm_tos = 0;
+	rtm->rtm_table = RT_TABLE_MAIN;
+	rtm->rtm_protocol = RTPROT_STATIC;
+	rtm->rtm_scope = RT_SCOPE_UNIVERSE;
+	rtm->rtm_type = RTN_UNICAST;
+	rtm->rtm_flags = 0;
+	NLA_PUT_U8(skb, RTA_DST, dst);
+	NLA_PUT_U32(skb, RTA_OIF, dev->ifindex);
+	return nlmsg_end(skb, nlh);
+
+nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+	return -EMSGSIZE;
+}
+
+void rtm_phonet_notify(int event, struct net_device *dev, u8 dst)
+{
+	struct sk_buff *skb;
+	int err = -ENOBUFS;
+
+	skb = nlmsg_new(NLMSG_ALIGN(sizeof(struct ifaddrmsg)) +
+			nla_total_size(1) + nla_total_size(4), GFP_KERNEL);
+	if (skb == NULL)
+		goto errout;
+	err = fill_route(skb, dev, dst, 0, 0, event);
+	if (err < 0) {
+		WARN_ON(err == -EMSGSIZE);
+		kfree_skb(skb);
+		goto errout;
+	}
+	rtnl_notify(skb, dev_net(dev), 0,
+			  RTNLGRP_PHONET_ROUTE, NULL, GFP_KERNEL);
+	return;
+errout:
+	rtnl_set_sk_err(dev_net(dev), RTNLGRP_PHONET_ROUTE, err);
+}
+
+static const struct nla_policy rtm_phonet_policy[RTA_MAX+1] = {
+	[RTA_DST] = { .type = NLA_U8 },
+	[RTA_OIF] = { .type = NLA_U32 },
+};
+
+static int route_doit(struct sk_buff *skb, struct nlmsghdr *nlh, void *attr)
+{
+	struct net *net = sock_net(skb->sk);
+	struct nlattr *tb[RTA_MAX+1];
+	struct net_device *dev;
+	struct rtmsg *rtm;
+	int err;
+	u8 dst;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	ASSERT_RTNL();
+
+	err = nlmsg_parse(nlh, sizeof(*rtm), tb, RTA_MAX, rtm_phonet_policy);
+	if (err < 0)
+		return err;
+
+	rtm = nlmsg_data(nlh);
+	if (rtm->rtm_table != RT_TABLE_MAIN || rtm->rtm_type != RTN_UNICAST)
+		return -EINVAL;
+	if (tb[RTA_DST] == NULL || tb[RTA_OIF] == NULL)
+		return -EINVAL;
+	dst = nla_get_u8(tb[RTA_DST]);
+	if (dst & 3) /* Phonet addresses only have 6 high-order bits */
+		return -EINVAL;
+
+	dev = __dev_get_by_index(net, nla_get_u32(tb[RTA_OIF]));
+	if (dev == NULL)
+		return -ENODEV;
+
+	if (nlh->nlmsg_type == RTM_NEWROUTE)
+		err = phonet_route_add(dev, dst);
+	else
+		err = phonet_route_del(dev, dst);
+	if (!err)
+		rtm_phonet_notify(nlh->nlmsg_type, dev, dst);
+	return err;
+}
+
+static int route_dumpit(struct sk_buff *skb, struct netlink_callback *cb)
+{
+	struct net *net = sock_net(skb->sk);
+	u8 addr, addr_idx = 0, addr_start_idx = cb->args[0];
+
+	for (addr = 0; addr < 64; addr++) {
+		struct net_device *dev;
+
+		dev = phonet_route_get(net, addr << 2);
+		if (!dev)
+			continue;
+
+		if (addr_idx++ < addr_start_idx)
+			continue;
+		if (fill_route(skb, dev, addr << 2, NETLINK_CB(cb->skb).pid,
+				cb->nlh->nlmsg_seq, RTM_NEWROUTE))
+			goto out;
+	}
+
+out:
+	cb->args[0] = addr_idx;
+	cb->args[1] = 0;
+
+	return skb->len;
+}
+
 int __init phonet_netlink_register(void)
 {
 	int err = __rtnl_register(PF_PHONET, RTM_NEWADDR, addr_doit, NULL);
@@ -169,5 +294,8 @@
 	/* Further __rtnl_register() cannot fail */
 	__rtnl_register(PF_PHONET, RTM_DELADDR, addr_doit, NULL);
 	__rtnl_register(PF_PHONET, RTM_GETADDR, NULL, getaddr_dumpit);
+	__rtnl_register(PF_PHONET, RTM_NEWROUTE, route_doit, NULL);
+	__rtnl_register(PF_PHONET, RTM_DELROUTE, route_doit, NULL);
+	__rtnl_register(PF_PHONET, RTM_GETROUTE, NULL, route_dumpit);
 	return 0;
 }
diff --git a/net/phonet/socket.c b/net/phonet/socket.c
index aa5b5a9..0412beb 100644
--- a/net/phonet/socket.c
+++ b/net/phonet/socket.c
@@ -94,7 +94,30 @@
 	spin_unlock_bh(&pnsocks.lock);
 
 	return rval;
+}
 
+/* Deliver a broadcast packet (only in bottom-half) */
+void pn_deliver_sock_broadcast(struct net *net, struct sk_buff *skb)
+{
+	struct hlist_node *node;
+	struct sock *sknode;
+
+	spin_lock(&pnsocks.lock);
+	sk_for_each(sknode, node, &pnsocks.hlist) {
+		struct sk_buff *clone;
+
+		if (!net_eq(sock_net(sknode), net))
+			continue;
+		if (!sock_flag(sknode, SOCK_BROADCAST))
+			continue;
+
+		clone = skb_clone(skb, GFP_ATOMIC);
+		if (clone) {
+			sock_hold(sknode);
+			sk_receive_skb(sknode, clone, 0);
+		}
+	}
+	spin_unlock(&pnsocks.lock);
 }
 
 void pn_sock_hash(struct sock *sk)
diff --git a/net/rds/af_rds.c b/net/rds/af_rds.c
index 98e0538..e25d8d5 100644
--- a/net/rds/af_rds.c
+++ b/net/rds/af_rds.c
@@ -265,6 +265,9 @@
 	case RDS_GET_MR:
 		ret = rds_get_mr(rs, optval, optlen);
 		break;
+	case RDS_GET_MR_FOR_DEST:
+		ret = rds_get_mr_for_dest(rs, optval, optlen);
+		break;
 	case RDS_FREE_MR:
 		ret = rds_free_mr(rs, optval, optlen);
 		break;
@@ -407,7 +410,8 @@
 	return 0;
 }
 
-static int rds_create(struct net *net, struct socket *sock, int protocol)
+static int rds_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 
@@ -431,7 +435,7 @@
 	sock_put(rds_rs_to_sk(rs));
 }
 
-static struct net_proto_family rds_family_ops = {
+static const struct net_proto_family rds_family_ops = {
 	.family =	AF_RDS,
 	.create =	rds_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/rds/cong.c b/net/rds/cong.c
index dd2711d..6d06cac 100644
--- a/net/rds/cong.c
+++ b/net/rds/cong.c
@@ -218,6 +218,8 @@
 	spin_lock_irqsave(&rds_cong_lock, flags);
 
 	list_for_each_entry(conn, &map->m_conn_list, c_map_item) {
+		if (conn->c_loopback)
+			continue;
 		if (!test_and_set_bit(0, &conn->c_map_queued)) {
 			rds_stats_inc(s_cong_update_queued);
 			queue_delayed_work(rds_wq, &conn->c_send_w, 0);
diff --git a/net/rds/ib.h b/net/rds/ib.h
index 1378b85..64df4e7 100644
--- a/net/rds/ib.h
+++ b/net/rds/ib.h
@@ -98,6 +98,7 @@
 	struct rds_ib_send_work *i_sends;
 
 	/* rx */
+	struct tasklet_struct	i_recv_tasklet;
 	struct mutex		i_recv_mutex;
 	struct rds_ib_work_ring	i_recv_ring;
 	struct rds_ib_incoming	*i_ibinc;
@@ -303,6 +304,7 @@
 int rds_ib_inc_copy_to_user(struct rds_incoming *inc, struct iovec *iov,
 			     size_t size);
 void rds_ib_recv_cq_comp_handler(struct ib_cq *cq, void *context);
+void rds_ib_recv_tasklet_fn(unsigned long data);
 void rds_ib_recv_init_ring(struct rds_ib_connection *ic);
 void rds_ib_recv_clear_ring(struct rds_ib_connection *ic);
 void rds_ib_recv_init_ack(struct rds_ib_connection *ic);
diff --git a/net/rds/ib_cm.c b/net/rds/ib_cm.c
index c2d372f..9d320692 100644
--- a/net/rds/ib_cm.c
+++ b/net/rds/ib_cm.c
@@ -694,6 +694,8 @@
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&ic->ib_node);
+	tasklet_init(&ic->i_recv_tasklet, rds_ib_recv_tasklet_fn,
+		     (unsigned long) ic);
 	mutex_init(&ic->i_recv_mutex);
 #ifndef KERNEL_HAS_ATOMIC64
 	spin_lock_init(&ic->i_ack_lock);
diff --git a/net/rds/ib_rdma.c b/net/rds/ib_rdma.c
index ef3ab5b..c5e9165 100644
--- a/net/rds/ib_rdma.c
+++ b/net/rds/ib_rdma.c
@@ -187,11 +187,8 @@
 	INIT_LIST_HEAD(list);
 	spin_unlock_irq(list_lock);
 
-	list_for_each_entry_safe(ic, _ic, &tmp_list, ib_node) {
-		if (ic->conn->c_passive)
-			rds_conn_destroy(ic->conn->c_passive);
+	list_for_each_entry_safe(ic, _ic, &tmp_list, ib_node)
 		rds_conn_destroy(ic->conn);
-	}
 }
 
 struct rds_ib_mr_pool *rds_ib_create_mr_pool(struct rds_ib_device *rds_ibdev)
diff --git a/net/rds/ib_recv.c b/net/rds/ib_recv.c
index cd7a6cf..fe5ab8c 100644
--- a/net/rds/ib_recv.c
+++ b/net/rds/ib_recv.c
@@ -143,15 +143,16 @@
 	int ret = -ENOMEM;
 
 	if (recv->r_ibinc == NULL) {
-		if (atomic_read(&rds_ib_allocation) >= rds_ib_sysctl_max_recv_allocation) {
+		if (!atomic_add_unless(&rds_ib_allocation, 1, rds_ib_sysctl_max_recv_allocation)) {
 			rds_ib_stats_inc(s_ib_rx_alloc_limit);
 			goto out;
 		}
 		recv->r_ibinc = kmem_cache_alloc(rds_ib_incoming_slab,
 						 kptr_gfp);
-		if (recv->r_ibinc == NULL)
+		if (recv->r_ibinc == NULL) {
+			atomic_dec(&rds_ib_allocation);
 			goto out;
-		atomic_inc(&rds_ib_allocation);
+		}
 		INIT_LIST_HEAD(&recv->r_ibinc->ii_frags);
 		rds_inc_init(&recv->r_ibinc->ii_inc, conn, conn->c_faddr);
 	}
@@ -824,17 +825,22 @@
 {
 	struct rds_connection *conn = context;
 	struct rds_ib_connection *ic = conn->c_transport_data;
-	struct ib_wc wc;
-	struct rds_ib_ack_state state = { 0, };
-	struct rds_ib_recv_work *recv;
 
 	rdsdebug("conn %p cq %p\n", conn, cq);
 
 	rds_ib_stats_inc(s_ib_rx_cq_call);
 
-	ib_req_notify_cq(cq, IB_CQ_SOLICITED);
+	tasklet_schedule(&ic->i_recv_tasklet);
+}
 
-	while (ib_poll_cq(cq, 1, &wc) > 0) {
+static inline void rds_poll_cq(struct rds_ib_connection *ic,
+			       struct rds_ib_ack_state *state)
+{
+	struct rds_connection *conn = ic->conn;
+	struct ib_wc wc;
+	struct rds_ib_recv_work *recv;
+
+	while (ib_poll_cq(ic->i_recv_cq, 1, &wc) > 0) {
 		rdsdebug("wc wr_id 0x%llx status %u byte_len %u imm_data %u\n",
 			 (unsigned long long)wc.wr_id, wc.status, wc.byte_len,
 			 be32_to_cpu(wc.ex.imm_data));
@@ -852,7 +858,7 @@
 		if (rds_conn_up(conn) || rds_conn_connecting(conn)) {
 			/* We expect errors as the qp is drained during shutdown */
 			if (wc.status == IB_WC_SUCCESS) {
-				rds_ib_process_recv(conn, recv, wc.byte_len, &state);
+				rds_ib_process_recv(conn, recv, wc.byte_len, state);
 			} else {
 				rds_ib_conn_error(conn, "recv completion on "
 				       "%pI4 had status %u, disconnecting and "
@@ -863,6 +869,17 @@
 
 		rds_ib_ring_free(&ic->i_recv_ring, 1);
 	}
+}
+
+void rds_ib_recv_tasklet_fn(unsigned long data)
+{
+	struct rds_ib_connection *ic = (struct rds_ib_connection *) data;
+	struct rds_connection *conn = ic->conn;
+	struct rds_ib_ack_state state = { 0, };
+
+	rds_poll_cq(ic, &state);
+	ib_req_notify_cq(ic->i_recv_cq, IB_CQ_SOLICITED);
+	rds_poll_cq(ic, &state);
 
 	if (state.ack_next_valid)
 		rds_ib_set_ack(ic, state.ack_next, state.ack_required);
diff --git a/net/rds/iw.h b/net/rds/iw.h
index dd72b62..eef2f0c 100644
--- a/net/rds/iw.h
+++ b/net/rds/iw.h
@@ -119,6 +119,7 @@
 	struct rds_iw_send_work *i_sends;
 
 	/* rx */
+	struct tasklet_struct	i_recv_tasklet;
 	struct mutex		i_recv_mutex;
 	struct rds_iw_work_ring	i_recv_ring;
 	struct rds_iw_incoming	*i_iwinc;
@@ -330,6 +331,7 @@
 int rds_iw_inc_copy_to_user(struct rds_incoming *inc, struct iovec *iov,
 			     size_t size);
 void rds_iw_recv_cq_comp_handler(struct ib_cq *cq, void *context);
+void rds_iw_recv_tasklet_fn(unsigned long data);
 void rds_iw_recv_init_ring(struct rds_iw_connection *ic);
 void rds_iw_recv_clear_ring(struct rds_iw_connection *ic);
 void rds_iw_recv_init_ack(struct rds_iw_connection *ic);
diff --git a/net/rds/iw_cm.c b/net/rds/iw_cm.c
index a416b0d..394cf6b 100644
--- a/net/rds/iw_cm.c
+++ b/net/rds/iw_cm.c
@@ -696,6 +696,8 @@
 		return -ENOMEM;
 
 	INIT_LIST_HEAD(&ic->iw_node);
+	tasklet_init(&ic->i_recv_tasklet, rds_iw_recv_tasklet_fn,
+		     (unsigned long) ic);
 	mutex_init(&ic->i_recv_mutex);
 #ifndef KERNEL_HAS_ATOMIC64
 	spin_lock_init(&ic->i_ack_lock);
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index de4a1b1..b25d785 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -245,11 +245,8 @@
 	INIT_LIST_HEAD(list);
 	spin_unlock_irq(list_lock);
 
-	list_for_each_entry_safe(ic, _ic, &tmp_list, iw_node) {
-		if (ic->conn->c_passive)
-			rds_conn_destroy(ic->conn->c_passive);
+	list_for_each_entry_safe(ic, _ic, &tmp_list, iw_node)
 		rds_conn_destroy(ic->conn);
-	}
 }
 
 static void rds_iw_set_scatterlist(struct rds_iw_scatterlist *sg,
diff --git a/net/rds/iw_recv.c b/net/rds/iw_recv.c
index 8683f5f..24fc53f 100644
--- a/net/rds/iw_recv.c
+++ b/net/rds/iw_recv.c
@@ -143,15 +143,16 @@
 	int ret = -ENOMEM;
 
 	if (recv->r_iwinc == NULL) {
-		if (atomic_read(&rds_iw_allocation) >= rds_iw_sysctl_max_recv_allocation) {
+		if (!atomic_add_unless(&rds_iw_allocation, 1, rds_iw_sysctl_max_recv_allocation)) {
 			rds_iw_stats_inc(s_iw_rx_alloc_limit);
 			goto out;
 		}
 		recv->r_iwinc = kmem_cache_alloc(rds_iw_incoming_slab,
 						 kptr_gfp);
-		if (recv->r_iwinc == NULL)
+		if (recv->r_iwinc == NULL) {
+			atomic_dec(&rds_iw_allocation);
 			goto out;
-		atomic_inc(&rds_iw_allocation);
+		}
 		INIT_LIST_HEAD(&recv->r_iwinc->ii_frags);
 		rds_inc_init(&recv->r_iwinc->ii_inc, conn, conn->c_faddr);
 	}
@@ -783,17 +784,22 @@
 {
 	struct rds_connection *conn = context;
 	struct rds_iw_connection *ic = conn->c_transport_data;
-	struct ib_wc wc;
-	struct rds_iw_ack_state state = { 0, };
-	struct rds_iw_recv_work *recv;
 
 	rdsdebug("conn %p cq %p\n", conn, cq);
 
 	rds_iw_stats_inc(s_iw_rx_cq_call);
 
-	ib_req_notify_cq(cq, IB_CQ_SOLICITED);
+	tasklet_schedule(&ic->i_recv_tasklet);
+}
 
-	while (ib_poll_cq(cq, 1, &wc) > 0) {
+static inline void rds_poll_cq(struct rds_iw_connection *ic,
+			       struct rds_iw_ack_state *state)
+{
+	struct rds_connection *conn = ic->conn;
+	struct ib_wc wc;
+	struct rds_iw_recv_work *recv;
+
+	while (ib_poll_cq(ic->i_recv_cq, 1, &wc) > 0) {
 		rdsdebug("wc wr_id 0x%llx status %u byte_len %u imm_data %u\n",
 			 (unsigned long long)wc.wr_id, wc.status, wc.byte_len,
 			 be32_to_cpu(wc.ex.imm_data));
@@ -811,7 +817,7 @@
 		if (rds_conn_up(conn) || rds_conn_connecting(conn)) {
 			/* We expect errors as the qp is drained during shutdown */
 			if (wc.status == IB_WC_SUCCESS) {
-				rds_iw_process_recv(conn, recv, wc.byte_len, &state);
+				rds_iw_process_recv(conn, recv, wc.byte_len, state);
 			} else {
 				rds_iw_conn_error(conn, "recv completion on "
 				       "%pI4 had status %u, disconnecting and "
@@ -822,6 +828,17 @@
 
 		rds_iw_ring_free(&ic->i_recv_ring, 1);
 	}
+}
+
+void rds_iw_recv_tasklet_fn(unsigned long data)
+{
+	struct rds_iw_connection *ic = (struct rds_iw_connection *) data;
+	struct rds_connection *conn = ic->conn;
+	struct rds_iw_ack_state state = { 0, };
+
+	rds_poll_cq(ic, &state);
+	ib_req_notify_cq(ic->i_recv_cq, IB_CQ_SOLICITED);
+	rds_poll_cq(ic, &state);
 
 	if (state.ack_next_valid)
 		rds_iw_set_ack(ic, state.ack_next, state.ack_required);
diff --git a/net/rds/rdma.c b/net/rds/rdma.c
index 8dc83d2..971b5a6 100644
--- a/net/rds/rdma.c
+++ b/net/rds/rdma.c
@@ -317,6 +317,30 @@
 	return __rds_rdma_map(rs, &args, NULL, NULL);
 }
 
+int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen)
+{
+	struct rds_get_mr_for_dest_args args;
+	struct rds_get_mr_args new_args;
+
+	if (optlen != sizeof(struct rds_get_mr_for_dest_args))
+		return -EINVAL;
+
+	if (copy_from_user(&args, (struct rds_get_mr_for_dest_args __user *)optval,
+			   sizeof(struct rds_get_mr_for_dest_args)))
+		return -EFAULT;
+
+	/*
+	 * Initially, just behave like get_mr().
+	 * TODO: Implement get_mr as wrapper around this
+	 *	 and deprecate it.
+	 */
+	new_args.vec = args.vec;
+	new_args.cookie_addr = args.cookie_addr;
+	new_args.flags = args.flags;
+
+	return __rds_rdma_map(rs, &new_args, NULL, NULL);
+}
+
 /*
  * Free the MR indicated by the given R_Key
  */
diff --git a/net/rds/rdma.h b/net/rds/rdma.h
index 4255120..909c398 100644
--- a/net/rds/rdma.h
+++ b/net/rds/rdma.h
@@ -61,6 +61,7 @@
 }
 
 int rds_get_mr(struct rds_sock *rs, char __user *optval, int optlen);
+int rds_get_mr_for_dest(struct rds_sock *rs, char __user *optval, int optlen);
 int rds_free_mr(struct rds_sock *rs, char __user *optval, int optlen);
 void rds_rdma_drop_keys(struct rds_sock *rs);
 int rds_cmsg_rdma_args(struct rds_sock *rs, struct rds_message *rm,
diff --git a/net/rds/tcp_listen.c b/net/rds/tcp_listen.c
index 24b743e..45474a4 100644
--- a/net/rds/tcp_listen.c
+++ b/net/rds/tcp_listen.c
@@ -67,11 +67,11 @@
 	inet = inet_sk(new_sock->sk);
 
 	rdsdebug("accepted tcp %u.%u.%u.%u:%u -> %u.%u.%u.%u:%u\n",
-		  NIPQUAD(inet->saddr), ntohs(inet->sport),
-		  NIPQUAD(inet->daddr), ntohs(inet->dport));
+		  NIPQUAD(inet->inet_saddr), ntohs(inet->inet_sport),
+		  NIPQUAD(inet->inet_daddr), ntohs(inet->inet_dport));
 
-	conn = rds_conn_create(inet->saddr, inet->daddr, &rds_tcp_transport,
-			       GFP_KERNEL);
+	conn = rds_conn_create(inet->inet_saddr, inet->inet_daddr,
+			       &rds_tcp_transport, GFP_KERNEL);
 	if (IS_ERR(conn)) {
 		ret = PTR_ERR(conn);
 		goto out;
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index dbeaf29..ba2efb9 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -27,6 +27,7 @@
 #include <linux/list.h>
 #include <linux/mutex.h>
 #include <linux/rfkill.h>
+#include <linux/sched.h>
 #include <linux/spinlock.h>
 #include <linux/miscdevice.h>
 #include <linux/wait.h>
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 502cce7..4de4287 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -512,7 +512,8 @@
 	.obj_size = sizeof(struct rose_sock),
 };
 
-static int rose_create(struct net *net, struct socket *sock, int protocol)
+static int rose_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	struct sock *sk;
 	struct rose_sock *rose;
@@ -1509,7 +1510,7 @@
 };
 #endif	/* CONFIG_PROC_FS */
 
-static struct net_proto_family rose_family_ops = {
+static const struct net_proto_family rose_family_ops = {
 	.family		=	PF_ROSE,
 	.create		=	rose_create,
 	.owner		=	THIS_MODULE,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index f3e2198..ea2e723 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -600,13 +600,13 @@
 {
 	struct net_device *dev, *first = NULL;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE)
 			if (first == NULL || strncmp(dev->name, first->name, 3) < 0)
 				first = dev;
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 
 	return first;
 }
@@ -618,8 +618,8 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE && rosecmp(addr, (rose_address *)dev->dev_addr) == 0) {
 			dev_hold(dev);
 			goto out;
@@ -627,7 +627,7 @@
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev;
 }
 
@@ -635,14 +635,14 @@
 {
 	struct net_device *dev;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		if ((dev->flags & IFF_UP) && dev->type == ARPHRD_ROSE && rosecmp(addr, (rose_address *)dev->dev_addr) == 0)
 			goto out;
 	}
 	dev = NULL;
 out:
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 	return dev != NULL;
 }
 
diff --git a/net/rxrpc/af_rxrpc.c b/net/rxrpc/af_rxrpc.c
index a86afce..f978d02 100644
--- a/net/rxrpc/af_rxrpc.c
+++ b/net/rxrpc/af_rxrpc.c
@@ -608,7 +608,8 @@
 /*
  * create an RxRPC socket
  */
-static int rxrpc_create(struct net *net, struct socket *sock, int protocol)
+static int rxrpc_create(struct net *net, struct socket *sock, int protocol,
+			int kern)
 {
 	struct rxrpc_sock *rx;
 	struct sock *sk;
@@ -777,7 +778,7 @@
 	.max_header	= sizeof(struct rxrpc_header),
 };
 
-static struct net_proto_family rxrpc_family_ops = {
+static const struct net_proto_family rxrpc_family_ops = {
 	.family	= PF_RXRPC,
 	.create = rxrpc_create,
 	.owner	= THIS_MODULE,
diff --git a/net/rxrpc/ar-recvmsg.c b/net/rxrpc/ar-recvmsg.c
index a39bf97..60c2b94e 100644
--- a/net/rxrpc/ar-recvmsg.c
+++ b/net/rxrpc/ar-recvmsg.c
@@ -146,7 +146,7 @@
 				memcpy(msg->msg_name,
 				       &call->conn->trans->peer->srx,
 				       sizeof(call->conn->trans->peer->srx));
-			sock_recv_timestamp(msg, &rx->sk, skb);
+			sock_recv_ts_and_drops(msg, &rx->sk, skb);
 		}
 
 		/* receive the message */
diff --git a/net/sched/act_api.c b/net/sched/act_api.c
index 2dfb3e7..ca2e1fd 100644
--- a/net/sched/act_api.c
+++ b/net/sched/act_api.c
@@ -618,7 +618,8 @@
 			goto errout;
 
 	if (gnet_stats_copy_basic(&d, &h->tcf_bstats) < 0 ||
-	    gnet_stats_copy_rate_est(&d, &h->tcf_rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(&d, &h->tcf_bstats,
+				     &h->tcf_rate_est) < 0 ||
 	    gnet_stats_copy_queue(&d, &h->tcf_qstats) < 0)
 		goto errout;
 
diff --git a/net/sched/act_skbedit.c b/net/sched/act_skbedit.c
index 4ab916b..e9607fe 100644
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_skbedit.c
@@ -54,6 +54,8 @@
 	if (d->flags & SKBEDIT_F_QUEUE_MAPPING &&
 	    skb->dev->real_num_tx_queues > d->queue_mapping)
 		skb_set_queue_mapping(skb, d->queue_mapping);
+	if (d->flags & SKBEDIT_F_MARK)
+		skb->mark = d->mark;
 
 	spin_unlock(&d->tcf_lock);
 	return d->tcf_action;
@@ -63,6 +65,7 @@
 	[TCA_SKBEDIT_PARMS]		= { .len = sizeof(struct tc_skbedit) },
 	[TCA_SKBEDIT_PRIORITY]		= { .len = sizeof(u32) },
 	[TCA_SKBEDIT_QUEUE_MAPPING]	= { .len = sizeof(u16) },
+	[TCA_SKBEDIT_MARK]		= { .len = sizeof(u32) },
 };
 
 static int tcf_skbedit_init(struct nlattr *nla, struct nlattr *est,
@@ -72,7 +75,7 @@
 	struct tc_skbedit *parm;
 	struct tcf_skbedit *d;
 	struct tcf_common *pc;
-	u32 flags = 0, *priority = NULL;
+	u32 flags = 0, *priority = NULL, *mark = NULL;
 	u16 *queue_mapping = NULL;
 	int ret = 0, err;
 
@@ -95,6 +98,12 @@
 		flags |= SKBEDIT_F_QUEUE_MAPPING;
 		queue_mapping = nla_data(tb[TCA_SKBEDIT_QUEUE_MAPPING]);
 	}
+
+	if (tb[TCA_SKBEDIT_MARK] != NULL) {
+		flags |= SKBEDIT_F_MARK;
+		mark = nla_data(tb[TCA_SKBEDIT_MARK]);
+	}
+
 	if (!flags)
 		return -EINVAL;
 
@@ -124,6 +133,9 @@
 		d->priority = *priority;
 	if (flags & SKBEDIT_F_QUEUE_MAPPING)
 		d->queue_mapping = *queue_mapping;
+	if (flags & SKBEDIT_F_MARK)
+		d->mark = *mark;
+
 	d->tcf_action = parm->action;
 
 	spin_unlock_bh(&d->tcf_lock);
@@ -161,6 +173,9 @@
 	if (d->flags & SKBEDIT_F_QUEUE_MAPPING)
 		NLA_PUT(skb, TCA_SKBEDIT_QUEUE_MAPPING,
 			sizeof(d->queue_mapping), &d->queue_mapping);
+	if (d->flags & SKBEDIT_F_MARK)
+		NLA_PUT(skb, TCA_SKBEDIT_MARK, sizeof(d->mark),
+			&d->mark);
 	t.install = jiffies_to_clock_t(jiffies - d->tcf_tm.install);
 	t.lastuse = jiffies_to_clock_t(jiffies - d->tcf_tm.lastuse);
 	t.expires = jiffies_to_clock_t(d->tcf_tm.expires);
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 7cf6c0f..c024da7 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -404,6 +404,7 @@
 			     a->cb->nlh->nlmsg_seq, NLM_F_MULTI, RTM_NEWTFILTER);
 }
 
+/* called with RTNL */
 static int tc_dump_tfilter(struct sk_buff *skb, struct netlink_callback *cb)
 {
 	struct net *net = sock_net(skb->sk);
@@ -422,7 +423,7 @@
 
 	if (cb->nlh->nlmsg_len < NLMSG_LENGTH(sizeof(*tcm)))
 		return skb->len;
-	if ((dev = dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
+	if ((dev = __dev_get_by_index(&init_net, tcm->tcm_ifindex)) == NULL)
 		return skb->len;
 
 	if (!tcm->tcm_parent)
@@ -484,7 +485,6 @@
 	if (cl)
 		cops->put(q, cl);
 out:
-	dev_put(dev);
 	return skb->len;
 }
 
diff --git a/net/sched/em_meta.c b/net/sched/em_meta.c
index 18d85d2..8e8d836 100644
--- a/net/sched/em_meta.c
+++ b/net/sched/em_meta.c
@@ -303,17 +303,17 @@
 {
 	SKIP_NONLOCAL(skb);
 
-	 if (skb->sk->sk_bound_dev_if == 0) {
+	if (skb->sk->sk_bound_dev_if == 0) {
 		dst->value = (unsigned long) "any";
 		dst->len = 3;
-	 } else  {
+	} else {
 		struct net_device *dev;
 
-		dev = dev_get_by_index(&init_net, skb->sk->sk_bound_dev_if);
+		rcu_read_lock();
+		dev = dev_get_by_index_rcu(&init_net, skb->sk->sk_bound_dev_if);
 		*err = var_dev(dev, dst);
-		if (dev)
-			dev_put(dev);
-	 }
+		rcu_read_unlock();
+	}
 }
 
 META_COLLECTOR(int_sk_refcnt)
diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c
index 903e418..1acfd29 100644
--- a/net/sched/sch_api.c
+++ b/net/sched/sch_api.c
@@ -1179,7 +1179,7 @@
 		goto nla_put_failure;
 
 	if (gnet_stats_copy_basic(&d, &q->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(&d, &q->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(&d, &q->bstats, &q->rate_est) < 0 ||
 	    gnet_stats_copy_queue(&d, &q->qstats) < 0)
 		goto nla_put_failure;
 
diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c
index 5b132c4..3846d65 100644
--- a/net/sched/sch_cbq.c
+++ b/net/sched/sch_cbq.c
@@ -1609,7 +1609,7 @@
 		cl->xstats.undertime = cl->undertime - q->now;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_drr.c b/net/sched/sch_drr.c
index 5a888af..a65604f 100644
--- a/net/sched/sch_drr.c
+++ b/net/sched/sch_drr.c
@@ -280,7 +280,7 @@
 	}
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qdisc->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 2c5c76b..b38b39c 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1375,7 +1375,7 @@
 	xstats.rtwork  = cl->cl_cumul;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, &cl->bstats, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c
index 85acab9..2e38d1a 100644
--- a/net/sched/sch_htb.c
+++ b/net/sched/sch_htb.c
@@ -1105,7 +1105,7 @@
 	cl->xstats.ctokens = cl->ctokens;
 
 	if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-	    gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
+	    gnet_stats_copy_rate_est(d, NULL, &cl->rate_est) < 0 ||
 	    gnet_stats_copy_queue(d, &cl->qstats) < 0)
 		return -1;
 
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index bb280e6..cc50fbe 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -837,15 +837,16 @@
 		if (type & IPV6_ADDR_LINKLOCAL) {
 			if (!addr->v6.sin6_scope_id)
 				return 0;
-			dev = dev_get_by_index(&init_net, addr->v6.sin6_scope_id);
-			if (!dev)
-				return 0;
-			if (!ipv6_chk_addr(&init_net, &addr->v6.sin6_addr,
+			rcu_read_lock();
+			dev = dev_get_by_index_rcu(&init_net,
+						   addr->v6.sin6_scope_id);
+			if (!dev ||
+			    !ipv6_chk_addr(&init_net, &addr->v6.sin6_addr,
 					   dev, 0)) {
-				dev_put(dev);
+				rcu_read_unlock();
 				return 0;
 			}
-			dev_put(dev);
+			rcu_read_unlock();
 		} else if (type == IPV6_ADDR_MAPPED) {
 			if (!opt->v4mapped)
 				return 0;
@@ -873,10 +874,12 @@
 		if (type & IPV6_ADDR_LINKLOCAL) {
 			if (!addr->v6.sin6_scope_id)
 				return 0;
-			dev = dev_get_by_index(&init_net, addr->v6.sin6_scope_id);
+			rcu_read_lock();
+			dev = dev_get_by_index_rcu(&init_net,
+						   addr->v6.sin6_scope_id);
+			rcu_read_unlock();
 			if (!dev)
 				return 0;
-			dev_put(dev);
 		}
 		af = opt->pf->af;
 	}
@@ -930,7 +933,6 @@
 	.protocol      = IPPROTO_SCTP,
 	.prot 	       = &sctpv6_prot,
 	.ops           = &inet6_seqpacket_ops,
-	.capability    = -1,
 	.no_check      = 0,
 	.flags         = SCTP_PROTOSW_FLAG
 };
@@ -939,7 +941,6 @@
 	.protocol      = IPPROTO_SCTP,
 	.prot 	       = &sctpv6_prot,
 	.ops           = &inet6_seqpacket_ops,
-	.capability    = -1,
 	.no_check      = 0,
 	.flags         = SCTP_PROTOSW_FLAG,
 };
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 612dc87..08ef203 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -205,14 +205,14 @@
 	struct list_head *pos;
 	struct sctp_af *af;
 
-	read_lock(&dev_base_lock);
-	for_each_netdev(&init_net, dev) {
+	rcu_read_lock();
+	for_each_netdev_rcu(&init_net, dev) {
 		__list_for_each(pos, &sctp_address_families) {
 			af = list_entry(pos, struct sctp_af, list);
 			af->copy_addrlist(&sctp_local_addr_list, dev);
 		}
 	}
-	read_unlock(&dev_base_lock);
+	rcu_read_unlock();
 }
 
 /* Free the existing local addresses.  */
@@ -296,19 +296,19 @@
 {
 	addr->v4.sin_family = AF_INET;
 	addr->v4.sin_port = 0;
-	addr->v4.sin_addr.s_addr = inet_sk(sk)->rcv_saddr;
+	addr->v4.sin_addr.s_addr = inet_sk(sk)->inet_rcv_saddr;
 }
 
 /* Initialize sk->sk_rcv_saddr from sctp_addr. */
 static void sctp_v4_to_sk_saddr(union sctp_addr *addr, struct sock *sk)
 {
-	inet_sk(sk)->rcv_saddr = addr->v4.sin_addr.s_addr;
+	inet_sk(sk)->inet_rcv_saddr = addr->v4.sin_addr.s_addr;
 }
 
 /* Initialize sk->sk_daddr from sctp_addr. */
 static void sctp_v4_to_sk_daddr(union sctp_addr *addr, struct sock *sk)
 {
-	inet_sk(sk)->daddr = addr->v4.sin_addr.s_addr;
+	inet_sk(sk)->inet_daddr = addr->v4.sin_addr.s_addr;
 }
 
 /* Initialize a sctp_addr from an address parameter. */
@@ -598,7 +598,7 @@
 
 	newinet = inet_sk(newsk);
 
-	newinet->daddr = asoc->peer.primary_addr.v4.sin_addr.s_addr;
+	newinet->inet_daddr = asoc->peer.primary_addr.v4.sin_addr.s_addr;
 
 	sk_refcnt_debug_inc(newsk);
 
@@ -909,7 +909,6 @@
 	.protocol   = IPPROTO_SCTP,
 	.prot       = &sctp_prot,
 	.ops        = &inet_seqpacket_ops,
-	.capability = -1,
 	.no_check   = 0,
 	.flags      = SCTP_PROTOSW_FLAG
 };
@@ -918,7 +917,6 @@
 	.protocol   = IPPROTO_SCTP,
 	.prot       = &sctp_prot,
 	.ops        = &inet_seqpacket_ops,
-	.capability = -1,
 	.no_check   = 0,
 	.flags      = SCTP_PROTOSW_FLAG
 };
diff --git a/net/sctp/socket.c b/net/sctp/socket.c
index c8d0575..4085db9 100644
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -394,7 +394,7 @@
 
 	/* Refresh ephemeral port.  */
 	if (!bp->port)
-		bp->port = inet_sk(sk)->num;
+		bp->port = inet_sk(sk)->inet_num;
 
 	/* Add the address to the bind address list.
 	 * Use GFP_ATOMIC since BHs will be disabled.
@@ -403,7 +403,7 @@
 
 	/* Copy back into socket for getsockname() use. */
 	if (!ret) {
-		inet_sk(sk)->sport = htons(inet_sk(sk)->num);
+		inet_sk(sk)->inet_sport = htons(inet_sk(sk)->inet_num);
 		af->to_sk_saddr(addr, sk);
 	}
 
@@ -1115,7 +1115,7 @@
 	}
 
 	/* Initialize sk's dport and daddr for getpeername() */
-	inet_sk(sk)->dport = htons(asoc->peer.port);
+	inet_sk(sk)->inet_dport = htons(asoc->peer.port);
 	af = sctp_get_af_specific(sa_addr->sa.sa_family);
 	af->to_sk_daddr(sa_addr, sk);
 	sk->sk_err = 0;
@@ -1958,7 +1958,7 @@
 	if (err)
 		goto out_free;
 
-	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_ts_and_drops(msg, sk, skb);
 	if (sctp_ulpevent_is_notification(event)) {
 		msg->msg_flags |= MSG_NOTIFICATION;
 		sp->pf->event_msgname(event, msg->msg_name, addr_len);
@@ -5851,7 +5851,7 @@
 	 */
 success:
 	if (!sctp_sk(sk)->bind_hash) {
-		inet_sk(sk)->num = snum;
+		inet_sk(sk)->inet_num = snum;
 		sk_add_bind_node(sk, &pp->owner);
 		sctp_sk(sk)->bind_hash = pp;
 	}
@@ -5923,7 +5923,7 @@
 		if (sctp_autobind(sk))
 			return -EAGAIN;
 	} else {
-		if (sctp_get_port(sk, inet_sk(sk)->num)) {
+		if (sctp_get_port(sk, inet_sk(sk)->inet_num)) {
 			sk->sk_state = SCTP_SS_CLOSED;
 			return -EADDRINUSE;
 		}
@@ -6094,14 +6094,14 @@
 static inline void __sctp_put_port(struct sock *sk)
 {
 	struct sctp_bind_hashbucket *head =
-		&sctp_port_hashtable[sctp_phashfn(inet_sk(sk)->num)];
+		&sctp_port_hashtable[sctp_phashfn(inet_sk(sk)->inet_num)];
 	struct sctp_bind_bucket *pp;
 
 	sctp_spin_lock(&head->lock);
 	pp = sctp_sk(sk)->bind_hash;
 	__sk_del_bind_node(sk);
 	sctp_sk(sk)->bind_hash = NULL;
-	inet_sk(sk)->num = 0;
+	inet_sk(sk)->inet_num = 0;
 	sctp_bucket_destroy(pp);
 	sctp_spin_unlock(&head->lock);
 }
@@ -6128,7 +6128,7 @@
 	/* Initialize a local sockaddr structure to INADDR_ANY. */
 	af = sctp_sk(sk)->pf->af;
 
-	port = htons(inet_sk(sk)->num);
+	port = htons(inet_sk(sk)->inet_num);
 	af->inaddr_any(&autoaddr, port);
 
 	return sctp_do_bind(sk, &autoaddr, af->sockaddr_len);
@@ -6697,12 +6697,12 @@
 	/* Initialize sk's sport, dport, rcv_saddr and daddr for
 	 * getsockname() and getpeername()
 	 */
-	newinet->sport = inet->sport;
-	newinet->saddr = inet->saddr;
-	newinet->rcv_saddr = inet->rcv_saddr;
-	newinet->dport = htons(asoc->peer.port);
+	newinet->inet_sport = inet->inet_sport;
+	newinet->inet_saddr = inet->inet_saddr;
+	newinet->inet_rcv_saddr = inet->inet_rcv_saddr;
+	newinet->inet_dport = htons(asoc->peer.port);
 	newinet->pmtudisc = inet->pmtudisc;
-	newinet->id = asoc->next_tsn ^ jiffies;
+	newinet->inet_id = asoc->next_tsn ^ jiffies;
 
 	newinet->uc_ttl = inet->uc_ttl;
 	newinet->mc_loop = 1;
@@ -6741,13 +6741,13 @@
 	newsp->hmac = NULL;
 
 	/* Hook this new socket in to the bind_hash list. */
-	head = &sctp_port_hashtable[sctp_phashfn(inet_sk(oldsk)->num)];
+	head = &sctp_port_hashtable[sctp_phashfn(inet_sk(oldsk)->inet_num)];
 	sctp_local_bh_disable();
 	sctp_spin_lock(&head->lock);
 	pp = sctp_sk(oldsk)->bind_hash;
 	sk_add_bind_node(newsk, &pp->owner);
 	sctp_sk(newsk)->bind_hash = pp;
-	inet_sk(newsk)->num = inet_sk(oldsk)->num;
+	inet_sk(newsk)->inet_num = inet_sk(oldsk)->inet_num;
 	sctp_spin_unlock(&head->lock);
 	sctp_local_bh_enable();
 
diff --git a/net/socket.c b/net/socket.c
index 7565536..4f3e0f0 100644
--- a/net/socket.c
+++ b/net/socket.c
@@ -668,10 +668,24 @@
 
 EXPORT_SYMBOL_GPL(__sock_recv_timestamp);
 
-static inline int __sock_recvmsg(struct kiocb *iocb, struct socket *sock,
-				 struct msghdr *msg, size_t size, int flags)
+inline void sock_recv_drops(struct msghdr *msg, struct sock *sk, struct sk_buff *skb)
 {
-	int err;
+	if (sock_flag(sk, SOCK_RXQ_OVFL) && skb && skb->dropcount)
+		put_cmsg(msg, SOL_SOCKET, SO_RXQ_OVFL,
+			sizeof(__u32), &skb->dropcount);
+}
+
+void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk,
+	struct sk_buff *skb)
+{
+	sock_recv_timestamp(msg, sk, skb);
+	sock_recv_drops(msg, sk, skb);
+}
+EXPORT_SYMBOL_GPL(sock_recv_ts_and_drops);
+
+static inline int __sock_recvmsg_nosec(struct kiocb *iocb, struct socket *sock,
+				       struct msghdr *msg, size_t size, int flags)
+{
 	struct sock_iocb *si = kiocb_to_siocb(iocb);
 
 	si->sock = sock;
@@ -680,13 +694,17 @@
 	si->size = size;
 	si->flags = flags;
 
-	err = security_socket_recvmsg(sock, msg, size, flags);
-	if (err)
-		return err;
-
 	return sock->ops->recvmsg(iocb, sock, msg, size, flags);
 }
 
+static inline int __sock_recvmsg(struct kiocb *iocb, struct socket *sock,
+				 struct msghdr *msg, size_t size, int flags)
+{
+	int err = security_socket_recvmsg(sock, msg, size, flags);
+
+	return err ?: __sock_recvmsg_nosec(iocb, sock, msg, size, flags);
+}
+
 int sock_recvmsg(struct socket *sock, struct msghdr *msg,
 		 size_t size, int flags)
 {
@@ -702,6 +720,21 @@
 	return ret;
 }
 
+static int sock_recvmsg_nosec(struct socket *sock, struct msghdr *msg,
+			      size_t size, int flags)
+{
+	struct kiocb iocb;
+	struct sock_iocb siocb;
+	int ret;
+
+	init_sync_kiocb(&iocb, NULL);
+	iocb.private = &siocb;
+	ret = __sock_recvmsg_nosec(&iocb, sock, msg, size, flags);
+	if (-EIOCBQUEUED == ret)
+		ret = wait_on_sync_kiocb(&iocb);
+	return ret;
+}
+
 int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
 		   struct kvec *vec, size_t num, size_t size, int flags)
 {
@@ -905,11 +938,11 @@
 	if (cmd >= SIOCDEVPRIVATE && cmd <= (SIOCDEVPRIVATE + 15)) {
 		err = dev_ioctl(net, cmd, argp);
 	} else
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_WEXT_CORE
 	if (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) {
 		err = dev_ioctl(net, cmd, argp);
 	} else
-#endif				/* CONFIG_WIRELESS_EXT */
+#endif
 		switch (cmd) {
 		case FIOSETOWN:
 		case SIOCSPGRP:
@@ -1100,11 +1133,14 @@
 		fna->fa_next = sock->fasync_list;
 		write_lock_bh(&sk->sk_callback_lock);
 		sock->fasync_list = fna;
+		sock_set_flag(sk, SOCK_FASYNC);
 		write_unlock_bh(&sk->sk_callback_lock);
 	} else {
 		if (fa != NULL) {
 			write_lock_bh(&sk->sk_callback_lock);
 			*prev = fa->fa_next;
+			if (!sock->fasync_list)
+				sock_reset_flag(sk, SOCK_FASYNC);
 			write_unlock_bh(&sk->sk_callback_lock);
 			kfree(fa);
 		}
@@ -1216,7 +1252,7 @@
 	/* Now protected by module ref count */
 	rcu_read_unlock();
 
-	err = pf->create(net, sock, protocol);
+	err = pf->create(net, sock, protocol, kern);
 	if (err < 0)
 		goto out_module_put;
 
@@ -1965,22 +2001,15 @@
 	return err;
 }
 
-/*
- *	BSD recvmsg interface
- */
-
-SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
-		unsigned int, flags)
+static int __sys_recvmsg(struct socket *sock, struct msghdr __user *msg,
+			 struct msghdr *msg_sys, unsigned flags, int nosec)
 {
 	struct compat_msghdr __user *msg_compat =
 	    (struct compat_msghdr __user *)msg;
-	struct socket *sock;
 	struct iovec iovstack[UIO_FASTIOV];
 	struct iovec *iov = iovstack;
-	struct msghdr msg_sys;
 	unsigned long cmsg_ptr;
 	int err, iov_size, total_len, len;
-	int fput_needed;
 
 	/* kernel mode address */
 	struct sockaddr_storage addr;
@@ -1990,27 +2019,23 @@
 	int __user *uaddr_len;
 
 	if (MSG_CMSG_COMPAT & flags) {
-		if (get_compat_msghdr(&msg_sys, msg_compat))
+		if (get_compat_msghdr(msg_sys, msg_compat))
 			return -EFAULT;
 	}
-	else if (copy_from_user(&msg_sys, msg, sizeof(struct msghdr)))
+	else if (copy_from_user(msg_sys, msg, sizeof(struct msghdr)))
 		return -EFAULT;
 
-	sock = sockfd_lookup_light(fd, &err, &fput_needed);
-	if (!sock)
-		goto out;
-
 	err = -EMSGSIZE;
-	if (msg_sys.msg_iovlen > UIO_MAXIOV)
-		goto out_put;
+	if (msg_sys->msg_iovlen > UIO_MAXIOV)
+		goto out;
 
 	/* Check whether to allocate the iovec area */
 	err = -ENOMEM;
-	iov_size = msg_sys.msg_iovlen * sizeof(struct iovec);
-	if (msg_sys.msg_iovlen > UIO_FASTIOV) {
+	iov_size = msg_sys->msg_iovlen * sizeof(struct iovec);
+	if (msg_sys->msg_iovlen > UIO_FASTIOV) {
 		iov = sock_kmalloc(sock->sk, iov_size, GFP_KERNEL);
 		if (!iov)
-			goto out_put;
+			goto out;
 	}
 
 	/*
@@ -2018,46 +2043,47 @@
 	 *      kernel msghdr to use the kernel address space)
 	 */
 
-	uaddr = (__force void __user *)msg_sys.msg_name;
+	uaddr = (__force void __user *)msg_sys->msg_name;
 	uaddr_len = COMPAT_NAMELEN(msg);
 	if (MSG_CMSG_COMPAT & flags) {
-		err = verify_compat_iovec(&msg_sys, iov,
+		err = verify_compat_iovec(msg_sys, iov,
 					  (struct sockaddr *)&addr,
 					  VERIFY_WRITE);
 	} else
-		err = verify_iovec(&msg_sys, iov,
+		err = verify_iovec(msg_sys, iov,
 				   (struct sockaddr *)&addr,
 				   VERIFY_WRITE);
 	if (err < 0)
 		goto out_freeiov;
 	total_len = err;
 
-	cmsg_ptr = (unsigned long)msg_sys.msg_control;
-	msg_sys.msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
+	cmsg_ptr = (unsigned long)msg_sys->msg_control;
+	msg_sys->msg_flags = flags & (MSG_CMSG_CLOEXEC|MSG_CMSG_COMPAT);
 
 	if (sock->file->f_flags & O_NONBLOCK)
 		flags |= MSG_DONTWAIT;
-	err = sock_recvmsg(sock, &msg_sys, total_len, flags);
+	err = (nosec ? sock_recvmsg_nosec : sock_recvmsg)(sock, msg_sys,
+							  total_len, flags);
 	if (err < 0)
 		goto out_freeiov;
 	len = err;
 
 	if (uaddr != NULL) {
 		err = move_addr_to_user((struct sockaddr *)&addr,
-					msg_sys.msg_namelen, uaddr,
+					msg_sys->msg_namelen, uaddr,
 					uaddr_len);
 		if (err < 0)
 			goto out_freeiov;
 	}
-	err = __put_user((msg_sys.msg_flags & ~MSG_CMSG_COMPAT),
+	err = __put_user((msg_sys->msg_flags & ~MSG_CMSG_COMPAT),
 			 COMPAT_FLAGS(msg));
 	if (err)
 		goto out_freeiov;
 	if (MSG_CMSG_COMPAT & flags)
-		err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
+		err = __put_user((unsigned long)msg_sys->msg_control - cmsg_ptr,
 				 &msg_compat->msg_controllen);
 	else
-		err = __put_user((unsigned long)msg_sys.msg_control - cmsg_ptr,
+		err = __put_user((unsigned long)msg_sys->msg_control - cmsg_ptr,
 				 &msg->msg_controllen);
 	if (err)
 		goto out_freeiov;
@@ -2066,21 +2092,150 @@
 out_freeiov:
 	if (iov != iovstack)
 		sock_kfree_s(sock->sk, iov, iov_size);
-out_put:
+out:
+	return err;
+}
+
+/*
+ *	BSD recvmsg interface
+ */
+
+SYSCALL_DEFINE3(recvmsg, int, fd, struct msghdr __user *, msg,
+		unsigned int, flags)
+{
+	int fput_needed, err;
+	struct msghdr msg_sys;
+	struct socket *sock = sockfd_lookup_light(fd, &err, &fput_needed);
+
+	if (!sock)
+		goto out;
+
+	err = __sys_recvmsg(sock, msg, &msg_sys, flags, 0);
+
 	fput_light(sock->file, fput_needed);
 out:
 	return err;
 }
 
-#ifdef __ARCH_WANT_SYS_SOCKETCALL
+/*
+ *     Linux recvmmsg interface
+ */
 
+int __sys_recvmmsg(int fd, struct mmsghdr __user *mmsg, unsigned int vlen,
+		   unsigned int flags, struct timespec *timeout)
+{
+	int fput_needed, err, datagrams;
+	struct socket *sock;
+	struct mmsghdr __user *entry;
+	struct msghdr msg_sys;
+	struct timespec end_time;
+
+	if (timeout &&
+	    poll_select_set_timeout(&end_time, timeout->tv_sec,
+				    timeout->tv_nsec))
+		return -EINVAL;
+
+	datagrams = 0;
+
+	sock = sockfd_lookup_light(fd, &err, &fput_needed);
+	if (!sock)
+		return err;
+
+	err = sock_error(sock->sk);
+	if (err)
+		goto out_put;
+
+	entry = mmsg;
+
+	while (datagrams < vlen) {
+		/*
+		 * No need to ask LSM for more than the first datagram.
+		 */
+		err = __sys_recvmsg(sock, (struct msghdr __user *)entry,
+				    &msg_sys, flags, datagrams);
+		if (err < 0)
+			break;
+		err = put_user(err, &entry->msg_len);
+		if (err)
+			break;
+		++entry;
+		++datagrams;
+
+		if (timeout) {
+			ktime_get_ts(timeout);
+			*timeout = timespec_sub(end_time, *timeout);
+			if (timeout->tv_sec < 0) {
+				timeout->tv_sec = timeout->tv_nsec = 0;
+				break;
+			}
+
+			/* Timeout, return less than vlen datagrams */
+			if (timeout->tv_nsec == 0 && timeout->tv_sec == 0)
+				break;
+		}
+
+		/* Out of band data, return right away */
+		if (msg_sys.msg_flags & MSG_OOB)
+			break;
+	}
+
+out_put:
+	fput_light(sock->file, fput_needed);
+
+	if (err == 0)
+		return datagrams;
+
+	if (datagrams != 0) {
+		/*
+		 * We may return less entries than requested (vlen) if the
+		 * sock is non block and there aren't enough datagrams...
+		 */
+		if (err != -EAGAIN) {
+			/*
+			 * ... or  if recvmsg returns an error after we
+			 * received some datagrams, where we record the
+			 * error to return on the next call or if the
+			 * app asks about it using getsockopt(SO_ERROR).
+			 */
+			sock->sk->sk_err = -err;
+		}
+
+		return datagrams;
+	}
+
+	return err;
+}
+
+SYSCALL_DEFINE5(recvmmsg, int, fd, struct mmsghdr __user *, mmsg,
+		unsigned int, vlen, unsigned int, flags,
+		struct timespec __user *, timeout)
+{
+	int datagrams;
+	struct timespec timeout_sys;
+
+	if (!timeout)
+		return __sys_recvmmsg(fd, mmsg, vlen, flags, NULL);
+
+	if (copy_from_user(&timeout_sys, timeout, sizeof(timeout_sys)))
+		return -EFAULT;
+
+	datagrams = __sys_recvmmsg(fd, mmsg, vlen, flags, &timeout_sys);
+
+	if (datagrams > 0 &&
+	    copy_to_user(timeout, &timeout_sys, sizeof(timeout_sys)))
+		datagrams = -EFAULT;
+
+	return datagrams;
+}
+
+#ifdef __ARCH_WANT_SYS_SOCKETCALL
 /* Argument list sizes for sys_socketcall */
 #define AL(x) ((x) * sizeof(unsigned long))
-static const unsigned char nargs[19]={
+static const unsigned char nargs[20] = {
 	AL(0),AL(3),AL(3),AL(3),AL(2),AL(3),
 	AL(3),AL(3),AL(4),AL(4),AL(4),AL(6),
 	AL(6),AL(2),AL(5),AL(5),AL(3),AL(3),
-	AL(4)
+	AL(4),AL(5)
 };
 
 #undef AL
@@ -2100,7 +2255,7 @@
 	int err;
 	unsigned int len;
 
-	if (call < 1 || call > SYS_ACCEPT4)
+	if (call < 1 || call > SYS_RECVMMSG)
 		return -EINVAL;
 
 	len = nargs[call];
@@ -2178,6 +2333,10 @@
 	case SYS_RECVMSG:
 		err = sys_recvmsg(a0, (struct msghdr __user *)a1, a[2]);
 		break;
+	case SYS_RECVMMSG:
+		err = sys_recvmmsg(a0, (struct mmsghdr __user *)a1, a[2], a[3],
+				   (struct timespec __user *)a[4]);
+		break;
 	case SYS_ACCEPT4:
 		err = sys_accept4(a0, (struct sockaddr __user *)a1,
 				  (int __user *)a[2], a[3]);
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 117f68a..f4c7ff3 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -686,8 +686,7 @@
 	case AF_INET:
 		sin = svc_addr_in(rqstp);
 		sin6 = &sin6_storage;
-		ipv6_addr_set(&sin6->sin6_addr, 0, 0,
-				htonl(0x0000FFFF), sin->sin_addr.s_addr);
+		ipv6_addr_set_v4mapped(sin->sin_addr.s_addr, &sin6->sin6_addr);
 		break;
 	case AF_INET6:
 		sin6 = svc_addr_in6(rqstp);
diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c
index 1c246a4..870929e 100644
--- a/net/sunrpc/svcsock.c
+++ b/net/sunrpc/svcsock.c
@@ -272,14 +272,14 @@
 	case PF_INET:
 		len = snprintf(buf, remaining, "ipv4 %s %pI4 %d\n",
 				proto_name,
-				&inet_sk(sk)->rcv_saddr,
-				inet_sk(sk)->num);
+				&inet_sk(sk)->inet_rcv_saddr,
+				inet_sk(sk)->inet_num);
 		break;
 	case PF_INET6:
 		len = snprintf(buf, remaining, "ipv6 %s %pI6 %d\n",
 				proto_name,
 				&inet6_sk(sk)->rcv_saddr,
-				inet_sk(sk)->num);
+				inet_sk(sk)->inet_num);
 		break;
 	default:
 		len = snprintf(buf, remaining, "*unknown-%d*\n",
@@ -1311,7 +1311,7 @@
 	/* Register socket with portmapper */
 	if (*errp >= 0 && pmap_register)
 		*errp = svc_register(serv, inet->sk_family, inet->sk_protocol,
-				     ntohs(inet_sk(inet)->sport));
+				     ntohs(inet_sk(inet)->inet_sport));
 
 	if (*errp < 0) {
 		kfree(svsk);
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e6d9abf..d00c211 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -177,6 +177,7 @@
  * @net: network namespace (must be default network)
  * @sock: pre-allocated socket structure
  * @protocol: protocol indicator (must be 0)
+ * @kern: caused by kernel or by userspace?
  *
  * This routine creates additional data structures used by the TIPC socket,
  * initializes them, and links them together.
@@ -184,7 +185,8 @@
  * Returns 0 on success, errno otherwise
  */
 
-static int tipc_create(struct net *net, struct socket *sock, int protocol)
+static int tipc_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	const struct proto_ops *ops;
 	socket_state state;
@@ -1528,7 +1530,7 @@
 
 	buf = skb_peek(&sk->sk_receive_queue);
 
-	res = tipc_create(sock_net(sock->sk), new_sock, 0);
+	res = tipc_create(sock_net(sock->sk), new_sock, 0, 0);
 	if (!res) {
 		struct sock *new_sk = new_sock->sk;
 		struct tipc_sock *new_tsock = tipc_sk(new_sk);
diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c
index fc820cd..178d3af 100644
--- a/net/unix/af_unix.c
+++ b/net/unix/af_unix.c
@@ -621,7 +621,8 @@
 	return sk;
 }
 
-static int unix_create(struct net *net, struct socket *sock, int protocol)
+static int unix_create(struct net *net, struct socket *sock, int protocol,
+		       int kern)
 {
 	if (protocol && protocol != PF_UNIX)
 		return -EPROTONOSUPPORT;
@@ -2216,7 +2217,7 @@
 
 #endif
 
-static struct net_proto_family unix_family_ops = {
+static const struct net_proto_family unix_family_ops = {
 	.family = PF_UNIX,
 	.create = unix_create,
 	.owner	= THIS_MODULE,
diff --git a/net/wireless/Kconfig b/net/wireless/Kconfig
index abf7ca3..614bdce 100644
--- a/net/wireless/Kconfig
+++ b/net/wireless/Kconfig
@@ -1,3 +1,21 @@
+config WIRELESS_EXT
+	bool
+
+config WEXT_CORE
+	def_bool y
+	depends on CFG80211_WEXT || WIRELESS_EXT
+
+config WEXT_PROC
+	def_bool y
+	depends on PROC_FS
+	depends on WEXT_CORE
+
+config WEXT_SPY
+	bool
+
+config WEXT_PRIV
+	bool
+
 config CFG80211
 	tristate "cfg80211 - wireless configuration API"
 	depends on RFKILL || !RFKILL
@@ -56,6 +74,12 @@
 
 	  If unsure, say N.
 
+config CFG80211_DEFAULT_PS_VALUE
+	int
+	default 1 if CFG80211_DEFAULT_PS
+	default 0
+	depends on CFG80211
+
 config CFG80211_DEFAULT_PS
 	bool "enable powersave by default"
 	depends on CFG80211
@@ -67,14 +91,10 @@
 	  applications instead -- they need to register their network
 	  latency requirement, see Documentation/power/pm_qos_interface.txt.
 
-config CFG80211_DEFAULT_PS_VALUE
-	int
-	default 1 if CFG80211_DEFAULT_PS
-	default 0
-
 config CFG80211_DEBUGFS
 	bool "cfg80211 DebugFS entries"
-	depends on CFG80211 && DEBUG_FS
+	depends on CFG80211
+	depends on DEBUG_FS
 	---help---
 	  You can enable this if you want to debugfs entries for cfg80211.
 
@@ -83,6 +103,7 @@
 config WIRELESS_OLD_REGULATORY
 	bool "Old wireless static regulatory definitions"
 	default n
+	depends on CFG80211
 	---help---
 	  This option enables the old static regulatory information
 	  and uses it within the new framework. This option is available
@@ -94,20 +115,19 @@
 
 	  Say N and if you say Y, please tell us why. The default is N.
 
-config WIRELESS_EXT
-	bool "Wireless extensions"
+config CFG80211_WEXT
+	bool "cfg80211 wireless extensions compatibility"
+	depends on CFG80211
+	select WEXT_CORE
 	default y
-	---help---
-	  This option enables the legacy wireless extensions
-	  (wireless network interface configuration via ioctls.)
-
-	  Say Y unless you've upgraded all your userspace to use
-	  nl80211 instead of wireless extensions.
+	help
+	  Enable this option if you need old userspace for wireless
+	  extensions with cfg80211-based drivers.
 
 config WIRELESS_EXT_SYSFS
 	bool "Wireless extensions sysfs files"
 	default y
-	depends on WIRELESS_EXT && SYSFS
+	depends on WEXT_CORE && SYSFS
 	help
 	  This option enables the deprecated wireless statistics
 	  files in /sys/class/net/*/wireless/. The same information
diff --git a/net/wireless/Makefile b/net/wireless/Makefile
index 3ecaa91..f07c8dc 100644
--- a/net/wireless/Makefile
+++ b/net/wireless/Makefile
@@ -1,13 +1,17 @@
-obj-$(CONFIG_WIRELESS_EXT) += wext.o
 obj-$(CONFIG_CFG80211) += cfg80211.o
 obj-$(CONFIG_LIB80211) += lib80211.o
 obj-$(CONFIG_LIB80211_CRYPT_WEP) += lib80211_crypt_wep.o
 obj-$(CONFIG_LIB80211_CRYPT_CCMP) += lib80211_crypt_ccmp.o
 obj-$(CONFIG_LIB80211_CRYPT_TKIP) += lib80211_crypt_tkip.o
 
+obj-$(CONFIG_WEXT_CORE) += wext-core.o
+obj-$(CONFIG_WEXT_PROC) += wext-proc.o
+obj-$(CONFIG_WEXT_SPY) += wext-spy.o
+obj-$(CONFIG_WEXT_PRIV) += wext-priv.o
+
 cfg80211-y += core.o sysfs.o radiotap.o util.o reg.o scan.o nl80211.o
-cfg80211-y += mlme.o ibss.o sme.o chan.o
+cfg80211-y += mlme.o ibss.o sme.o chan.o ethtool.o
 cfg80211-$(CONFIG_CFG80211_DEBUGFS) += debugfs.o
-cfg80211-$(CONFIG_WIRELESS_EXT) += wext-compat.o wext-sme.o
+cfg80211-$(CONFIG_CFG80211_WEXT) += wext-compat.o wext-sme.o
 
 ccflags-y += -D__CHECK_ENDIAN__
diff --git a/net/wireless/core.c b/net/wireless/core.c
index 45b2be3..0725296 100644
--- a/net/wireless/core.c
+++ b/net/wireless/core.c
@@ -21,6 +21,7 @@
 #include "sysfs.h"
 #include "debugfs.h"
 #include "wext-compat.h"
+#include "ethtool.h"
 
 /* name for sysfs, %d is appended */
 #define PHY_NAME "phy"
@@ -358,6 +359,10 @@
 	INIT_LIST_HEAD(&rdev->bss_list);
 	INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done);
 
+#ifdef CONFIG_CFG80211_WEXT
+	rdev->wiphy.wext = &cfg80211_wext_handler;
+#endif
+
 	device_initialize(&rdev->wiphy.dev);
 	rdev->wiphy.dev.class = &ieee80211_class;
 	rdev->wiphy.dev.platform_data = rdev;
@@ -625,6 +630,10 @@
 	dev_put(wdev->netdev);
 }
 
+static struct device_type wiphy_type = {
+	.name	= "wlan",
+};
+
 static int cfg80211_netdev_notifier_call(struct notifier_block * nb,
 					 unsigned long state,
 					 void *ndev)
@@ -641,6 +650,9 @@
 	WARN_ON(wdev->iftype == NL80211_IFTYPE_UNSPECIFIED);
 
 	switch (state) {
+	case NETDEV_POST_INIT:
+		SET_NETDEV_DEVTYPE(dev, &wiphy_type);
+		break;
 	case NETDEV_REGISTER:
 		/*
 		 * NB: cannot take rdev->mtx here because this may be
@@ -665,9 +677,7 @@
 		wdev->netdev = dev;
 		wdev->sme_state = CFG80211_SME_IDLE;
 		mutex_unlock(&rdev->devlist_mtx);
-#ifdef CONFIG_WIRELESS_EXT
-		if (!dev->wireless_handlers)
-			dev->wireless_handlers = &cfg80211_wext_handler;
+#ifdef CONFIG_CFG80211_WEXT
 		wdev->wext.default_key = -1;
 		wdev->wext.default_mgmt_key = -1;
 		wdev->wext.connect.auth_type = NL80211_AUTHTYPE_AUTOMATIC;
@@ -681,6 +691,8 @@
 				wdev->wext.ps = false;
 			}
 #endif
+		if (!dev->ethtool_ops)
+			dev->ethtool_ops = &cfg80211_ethtool_ops;
 		break;
 	case NETDEV_GOING_DOWN:
 		switch (wdev->iftype) {
@@ -689,7 +701,7 @@
 			break;
 		case NL80211_IFTYPE_STATION:
 			wdev_lock(wdev);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.ie);
 			wdev->wext.ie = NULL;
 			wdev->wext.ie_len = 0;
@@ -721,7 +733,7 @@
 			mutex_unlock(&rdev->devlist_mtx);
 			dev_put(dev);
 		}
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 		cfg80211_lock_rdev(rdev);
 		mutex_lock(&rdev->devlist_mtx);
 		wdev_lock(wdev);
@@ -759,7 +771,7 @@
 			sysfs_remove_link(&dev->dev.kobj, "phy80211");
 			list_del_init(&wdev->list);
 			rdev->devlist_generation++;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 			kfree(wdev->wext.keys);
 #endif
 		}
diff --git a/net/wireless/ethtool.c b/net/wireless/ethtool.c
new file mode 100644
index 0000000..ca4c825
--- /dev/null
+++ b/net/wireless/ethtool.c
@@ -0,0 +1,45 @@
+#include <linux/utsname.h>
+#include <net/cfg80211.h>
+#include "ethtool.h"
+
+static void cfg80211_get_drvinfo(struct net_device *dev,
+					struct ethtool_drvinfo *info)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	strlcpy(info->driver, wiphy_dev(wdev->wiphy)->driver->name,
+		sizeof(info->driver));
+
+	strlcpy(info->version, init_utsname()->release, sizeof(info->version));
+
+	if (wdev->wiphy->fw_version[0])
+		strncpy(info->fw_version, wdev->wiphy->fw_version,
+			sizeof(info->fw_version));
+	else
+		strncpy(info->fw_version, "N/A", sizeof(info->fw_version));
+
+	strlcpy(info->bus_info, dev_name(wiphy_dev(wdev->wiphy)),
+		sizeof(info->bus_info));
+}
+
+static int cfg80211_get_regs_len(struct net_device *dev)
+{
+	/* For now, return 0... */
+	return 0;
+}
+
+static void cfg80211_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			void *data)
+{
+	struct wireless_dev *wdev = dev->ieee80211_ptr;
+
+	regs->version = wdev->wiphy->hw_version;
+	regs->len = 0;
+}
+
+const struct ethtool_ops cfg80211_ethtool_ops = {
+	.get_drvinfo = cfg80211_get_drvinfo,
+	.get_regs_len = cfg80211_get_regs_len,
+	.get_regs = cfg80211_get_regs,
+	.get_link = ethtool_op_get_link,
+};
diff --git a/net/wireless/ethtool.h b/net/wireless/ethtool.h
new file mode 100644
index 0000000..695ecad
--- /dev/null
+++ b/net/wireless/ethtool.h
@@ -0,0 +1,6 @@
+#ifndef __CFG80211_ETHTOOL__
+#define __CFG80211_ETHTOOL__
+
+extern const struct ethtool_ops cfg80211_ethtool_ops;
+
+#endif /* __CFG80211_ETHTOOL__ */
diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c
index c883389..39b6d92 100644
--- a/net/wireless/ibss.c
+++ b/net/wireless/ibss.c
@@ -15,7 +15,7 @@
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_bss *bss;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -44,7 +44,7 @@
 
 	nl80211_send_ibss_bssid(wiphy_to_dev(wdev->wiphy), dev, bssid,
 				GFP_KERNEL);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	memset(&wrqu, 0, sizeof(wrqu));
 	memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
@@ -96,7 +96,7 @@
 		kfree(wdev->connect_keys);
 	wdev->connect_keys = connkeys;
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	wdev->wext.ibss.channel = params->channel;
 #endif
 	err = rdev->ops->join_ibss(&rdev->wiphy, dev, params);
@@ -154,7 +154,7 @@
 
 	wdev->current_bss = NULL;
 	wdev->ssid_len = 0;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!nowext)
 		wdev->wext.ibss.ssid_len = 0;
 #endif
@@ -203,7 +203,7 @@
 	return err;
 }
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 int cfg80211_ibss_wext_join(struct cfg80211_registered_device *rdev,
 			    struct wireless_dev *wdev)
 {
diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c
index 0a6b7a0..83c2a28 100644
--- a/net/wireless/mlme.c
+++ b/net/wireless/mlme.c
@@ -130,7 +130,7 @@
 }
 EXPORT_SYMBOL(cfg80211_send_rx_assoc);
 
-static void __cfg80211_send_deauth(struct net_device *dev,
+void __cfg80211_send_deauth(struct net_device *dev,
 				   const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -139,7 +139,6 @@
 	struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
 	const u8 *bssid = mgmt->bssid;
 	int i;
-	bool done = false;
 
 	ASSERT_WDEV_LOCK(wdev);
 
@@ -147,7 +146,6 @@
 
 	if (wdev->current_bss &&
 	    memcmp(wdev->current_bss->pub.bssid, bssid, ETH_ALEN) == 0) {
-		done = true;
 		cfg80211_unhold_bss(wdev->current_bss);
 		cfg80211_put_bss(&wdev->current_bss->pub);
 		wdev->current_bss = NULL;
@@ -157,7 +155,6 @@
 			cfg80211_unhold_bss(wdev->auth_bsses[i]);
 			cfg80211_put_bss(&wdev->auth_bsses[i]->pub);
 			wdev->auth_bsses[i] = NULL;
-			done = true;
 			break;
 		}
 		if (wdev->authtry_bsses[i] &&
@@ -165,13 +162,10 @@
 			cfg80211_unhold_bss(wdev->authtry_bsses[i]);
 			cfg80211_put_bss(&wdev->authtry_bsses[i]->pub);
 			wdev->authtry_bsses[i] = NULL;
-			done = true;
 			break;
 		}
 	}
 
-	WARN_ON(!done);
-
 	if (wdev->sme_state == CFG80211_SME_CONNECTED) {
 		u16 reason_code;
 		bool from_ap;
@@ -186,27 +180,19 @@
 					  false, NULL);
 	}
 }
+EXPORT_SYMBOL(__cfg80211_send_deauth);
 
-
-void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len,
-			  void *cookie)
+void cfg80211_send_deauth(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 
-	BUG_ON(cookie && wdev != cookie);
-
-	if (cookie) {
-		/* called within callback */
-		__cfg80211_send_deauth(dev, buf, len);
-	} else {
-		wdev_lock(wdev);
-		__cfg80211_send_deauth(dev, buf, len);
-		wdev_unlock(wdev);
-	}
+	wdev_lock(wdev);
+	__cfg80211_send_deauth(dev, buf, len);
+	wdev_unlock(wdev);
 }
 EXPORT_SYMBOL(cfg80211_send_deauth);
 
-static void __cfg80211_send_disassoc(struct net_device *dev,
+void __cfg80211_send_disassoc(struct net_device *dev,
 				     const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
@@ -247,22 +233,15 @@
 	from_ap = memcmp(mgmt->sa, dev->dev_addr, ETH_ALEN) != 0;
 	__cfg80211_disconnected(dev, NULL, 0, reason_code, from_ap);
 }
+EXPORT_SYMBOL(__cfg80211_send_disassoc);
 
-void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len,
-			    void *cookie)
+void cfg80211_send_disassoc(struct net_device *dev, const u8 *buf, size_t len)
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 
-	BUG_ON(cookie && wdev != cookie);
-
-	if (cookie) {
-		/* called within callback */
-		__cfg80211_send_disassoc(dev, buf, len);
-	} else {
-		wdev_lock(wdev);
-		__cfg80211_send_disassoc(dev, buf, len);
-		wdev_unlock(wdev);
-	}
+	wdev_lock(wdev);
+	__cfg80211_send_disassoc(dev, buf, len);
+	wdev_unlock(wdev);
 }
 EXPORT_SYMBOL(cfg80211_send_disassoc);
 
@@ -340,7 +319,7 @@
 {
 	struct wiphy *wiphy = dev->ieee80211_ptr->wiphy;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy);
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 	char *buf = kmalloc(128, gfp);
 
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index ca3c92a..f483941 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -1264,7 +1264,7 @@
 	if (!err)
 		err = func(&rdev->wiphy, dev, key.idx);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!err) {
 		if (func == rdev->ops->set_default_key)
 			dev->ieee80211_ptr->wext.default_key = key.idx;
@@ -1365,7 +1365,7 @@
 	if (!err)
 		err = rdev->ops->del_key(&rdev->wiphy, dev, key.idx, mac_addr);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!err) {
 		if (key.idx == dev->ieee80211_ptr->wext.default_key)
 			dev->ieee80211_ptr->wext.default_key = -1;
@@ -3105,6 +3105,8 @@
 		NLA_PUT_U16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval);
 	NLA_PUT_U16(msg, NL80211_BSS_CAPABILITY, res->capability);
 	NLA_PUT_U32(msg, NL80211_BSS_FREQUENCY, res->channel->center_freq);
+	NLA_PUT_U32(msg, NL80211_BSS_SEEN_MS_AGO,
+		jiffies_to_msecs(jiffies - intbss->ts));
 
 	switch (rdev->wiphy.signal_type) {
 	case CFG80211_SIGNAL_TYPE_MBM:
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index e5f92ee..2e8c515 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -22,7 +22,7 @@
 {
 	struct cfg80211_scan_request *request;
 	struct net_device *dev;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -47,7 +47,7 @@
 	else
 		nl80211_send_scan_done(rdev, dev);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (!request->aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
 
@@ -592,7 +592,7 @@
 }
 EXPORT_SYMBOL(cfg80211_unlink_bss);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 int cfg80211_wext_siwscan(struct net_device *dev,
 			  struct iw_request_info *info,
 			  union iwreq_data *wrqu, char *extra)
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index 9f0b280..0115d07 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -365,7 +365,7 @@
 {
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	u8 *country_ie;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -382,7 +382,7 @@
 				    resp_ie, resp_ie_len,
 				    status, GFP_KERNEL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (wextev) {
 		if (req_ie && status == WLAN_STATUS_SUCCESS) {
 			memset(&wrqu, 0, sizeof(wrqu));
@@ -497,7 +497,7 @@
 		       const u8 *resp_ie, size_t resp_ie_len)
 {
 	struct cfg80211_bss *bss;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -532,7 +532,7 @@
 			    req_ie, req_ie_len, resp_ie, resp_ie_len,
 			    GFP_KERNEL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	if (req_ie) {
 		memset(&wrqu, 0, sizeof(wrqu));
 		wrqu.data.length = req_ie_len;
@@ -593,7 +593,7 @@
 	struct wireless_dev *wdev = dev->ieee80211_ptr;
 	struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy);
 	int i;
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	union iwreq_data wrqu;
 #endif
 
@@ -651,7 +651,7 @@
 		for (i = 0; i < 6; i++)
 			rdev->ops->del_key(wdev->wiphy, dev, i, NULL);
 
-#ifdef CONFIG_WIRELESS_EXT
+#ifdef CONFIG_CFG80211_WEXT
 	memset(&wrqu, 0, sizeof(wrqu));
 	wrqu.ap_addr.sa_family = ARPHRD_ETHER;
 	wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c
new file mode 100644
index 0000000..a4e5ddc
--- /dev/null
+++ b/net/wireless/wext-core.c
@@ -0,0 +1,1063 @@
+/*
+ * This file implement the Wireless Extensions core API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ * Copyright	2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/wireless.h>
+#include <linux/uaccess.h>
+#include <net/cfg80211.h>
+#include <net/iw_handler.h>
+#include <net/netlink.h>
+#include <net/wext.h>
+#include <net/net_namespace.h>
+
+typedef int (*wext_ioctl_func)(struct net_device *, struct iwreq *,
+			       unsigned int, struct iw_request_info *,
+			       iw_handler);
+
+
+/*
+ * Meta-data about all the standard Wireless Extension request we
+ * know about.
+ */
+static const struct iw_ioctl_description standard_ioctl[] = {
+	[SIOCSIWCOMMIT	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWNAME	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_CHAR,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWNWID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWNWID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWFREQ	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_FREQ,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWFREQ	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_FREQ,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWMODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_UINT,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWMODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_UINT,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWSENS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWSENS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRANGE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWRANGE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_range),
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWPRIV	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWPRIV	- SIOCIWFIRST] = { /* (handled directly by us) */
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_priv_args),
+		.max_tokens	= 16,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWSTATS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_NULL,
+	},
+	[SIOCGIWSTATS	- SIOCIWFIRST] = { /* (handled directly by us) */
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_statistics),
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr),
+		.max_tokens	= IW_MAX_SPY,
+	},
+	[SIOCGIWSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr) +
+				  sizeof(struct iw_quality),
+		.max_tokens	= IW_MAX_SPY,
+	},
+	[SIOCSIWTHRSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_thrspy),
+		.min_tokens	= 1,
+		.max_tokens	= 1,
+	},
+	[SIOCGIWTHRSPY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct iw_thrspy),
+		.min_tokens	= 1,
+		.max_tokens	= 1,
+	},
+	[SIOCSIWAP	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[SIOCGIWAP	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWMLME	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_mlme),
+		.max_tokens	= sizeof(struct iw_mlme),
+	},
+	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= sizeof(struct sockaddr) +
+				  sizeof(struct iw_quality),
+		.max_tokens	= IW_MAX_AP,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWSCAN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= 0,
+		.max_tokens	= sizeof(struct iw_scan_req),
+	},
+	[SIOCGIWSCAN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_SCAN_MAX_DATA,
+		.flags		= IW_DESCR_FLAG_NOMAX,
+	},
+	[SIOCSIWESSID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+		.flags		= IW_DESCR_FLAG_EVENT,
+	},
+	[SIOCGIWESSID	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+		.flags		= IW_DESCR_FLAG_DUMP,
+	},
+	[SIOCSIWNICKN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+	},
+	[SIOCGIWNICKN	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ESSID_MAX_SIZE,
+	},
+	[SIOCSIWRATE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRATE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRTS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRTS	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWFRAG	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWFRAG	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWTXPOW	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWTXPOW	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWRETRY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWRETRY	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWENCODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ENCODING_TOKEN_MAX,
+		.flags		= IW_DESCR_FLAG_EVENT | IW_DESCR_FLAG_RESTRICT,
+	},
+	[SIOCGIWENCODE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_ENCODING_TOKEN_MAX,
+		.flags		= IW_DESCR_FLAG_DUMP | IW_DESCR_FLAG_RESTRICT,
+	},
+	[SIOCSIWPOWER	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWPOWER	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWGENIE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[SIOCGIWGENIE	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[SIOCSIWAUTH	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCGIWAUTH	- SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_PARAM,
+	},
+	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_encode_ext),
+		.max_tokens	= sizeof(struct iw_encode_ext) +
+				  IW_ENCODING_TOKEN_MAX,
+	},
+	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_encode_ext),
+		.max_tokens	= sizeof(struct iw_encode_ext) +
+				  IW_ENCODING_TOKEN_MAX,
+	},
+	[SIOCSIWPMKSA - SIOCIWFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.min_tokens	= sizeof(struct iw_pmksa),
+		.max_tokens	= sizeof(struct iw_pmksa),
+	},
+};
+static const unsigned standard_ioctl_num = ARRAY_SIZE(standard_ioctl);
+
+/*
+ * Meta-data about all the additional standard Wireless Extension events
+ * we know about.
+ */
+static const struct iw_ioctl_description standard_event[] = {
+	[IWEVTXDROP	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVQUAL	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_QUAL,
+	},
+	[IWEVCUSTOM	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_CUSTOM_MAX,
+	},
+	[IWEVREGISTERED	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVEXPIRED	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_ADDR,
+	},
+	[IWEVGENIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_michaelmicfailure),
+	},
+	[IWEVASSOCREQIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVASSOCRESPIE	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= IW_GENERIC_IE_MAX,
+	},
+	[IWEVPMKIDCAND	- IWEVFIRST] = {
+		.header_type	= IW_HEADER_TYPE_POINT,
+		.token_size	= 1,
+		.max_tokens	= sizeof(struct iw_pmkid_cand),
+	},
+};
+static const unsigned standard_event_num = ARRAY_SIZE(standard_event);
+
+/* Size (in bytes) of various events */
+static const int event_type_size[] = {
+	IW_EV_LCP_LEN,			/* IW_HEADER_TYPE_NULL */
+	0,
+	IW_EV_CHAR_LEN,			/* IW_HEADER_TYPE_CHAR */
+	0,
+	IW_EV_UINT_LEN,			/* IW_HEADER_TYPE_UINT */
+	IW_EV_FREQ_LEN,			/* IW_HEADER_TYPE_FREQ */
+	IW_EV_ADDR_LEN,			/* IW_HEADER_TYPE_ADDR */
+	0,
+	IW_EV_POINT_LEN,		/* Without variable payload */
+	IW_EV_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
+	IW_EV_QUAL_LEN,			/* IW_HEADER_TYPE_QUAL */
+};
+
+#ifdef CONFIG_COMPAT
+static const int compat_event_type_size[] = {
+	IW_EV_COMPAT_LCP_LEN,		/* IW_HEADER_TYPE_NULL */
+	0,
+	IW_EV_COMPAT_CHAR_LEN,		/* IW_HEADER_TYPE_CHAR */
+	0,
+	IW_EV_COMPAT_UINT_LEN,		/* IW_HEADER_TYPE_UINT */
+	IW_EV_COMPAT_FREQ_LEN,		/* IW_HEADER_TYPE_FREQ */
+	IW_EV_COMPAT_ADDR_LEN,		/* IW_HEADER_TYPE_ADDR */
+	0,
+	IW_EV_COMPAT_POINT_LEN,		/* Without variable payload */
+	IW_EV_COMPAT_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
+	IW_EV_COMPAT_QUAL_LEN,		/* IW_HEADER_TYPE_QUAL */
+};
+#endif
+
+
+/* IW event code */
+
+static int __net_init wext_pernet_init(struct net *net)
+{
+	skb_queue_head_init(&net->wext_nlevents);
+	return 0;
+}
+
+static void __net_exit wext_pernet_exit(struct net *net)
+{
+	skb_queue_purge(&net->wext_nlevents);
+}
+
+static struct pernet_operations wext_pernet_ops = {
+	.init = wext_pernet_init,
+	.exit = wext_pernet_exit,
+};
+
+static int __init wireless_nlevent_init(void)
+{
+	return register_pernet_subsys(&wext_pernet_ops);
+}
+
+subsys_initcall(wireless_nlevent_init);
+
+/* Process events generated by the wireless layer or the driver. */
+static void wireless_nlevent_process(struct work_struct *work)
+{
+	struct sk_buff *skb;
+	struct net *net;
+
+	rtnl_lock();
+
+	for_each_net(net) {
+		while ((skb = skb_dequeue(&net->wext_nlevents)))
+			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
+				    GFP_KERNEL);
+	}
+
+	rtnl_unlock();
+}
+
+static DECLARE_WORK(wireless_nlevent_work, wireless_nlevent_process);
+
+static struct nlmsghdr *rtnetlink_ifinfo_prep(struct net_device *dev,
+					      struct sk_buff *skb)
+{
+	struct ifinfomsg *r;
+	struct nlmsghdr  *nlh;
+
+	nlh = nlmsg_put(skb, 0, 0, RTM_NEWLINK, sizeof(*r), 0);
+	if (!nlh)
+		return NULL;
+
+	r = nlmsg_data(nlh);
+	r->ifi_family = AF_UNSPEC;
+	r->__ifi_pad = 0;
+	r->ifi_type = dev->type;
+	r->ifi_index = dev->ifindex;
+	r->ifi_flags = dev_get_flags(dev);
+	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
+
+	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
+
+	return nlh;
+ nla_put_failure:
+	nlmsg_cancel(skb, nlh);
+	return NULL;
+}
+
+
+/*
+ * Main event dispatcher. Called from other parts and drivers.
+ * Send the event on the appropriate channels.
+ * May be called from interrupt context.
+ */
+void wireless_send_event(struct net_device *	dev,
+			 unsigned int		cmd,
+			 union iwreq_data *	wrqu,
+			 const char *		extra)
+{
+	const struct iw_ioctl_description *	descr = NULL;
+	int extra_len = 0;
+	struct iw_event  *event;		/* Mallocated whole event */
+	int event_len;				/* Its size */
+	int hdr_len;				/* Size of the event header */
+	int wrqu_off = 0;			/* Offset in wrqu */
+	/* Don't "optimise" the following variable, it will crash */
+	unsigned	cmd_index;		/* *MUST* be unsigned */
+	struct sk_buff *skb;
+	struct nlmsghdr *nlh;
+	struct nlattr *nla;
+#ifdef CONFIG_COMPAT
+	struct __compat_iw_event *compat_event;
+	struct compat_iw_point compat_wrqu;
+	struct sk_buff *compskb;
+#endif
+
+	/*
+	 * Nothing in the kernel sends scan events with data, be safe.
+	 * This is necessary because we cannot fix up scan event data
+	 * for compat, due to being contained in 'extra', but normally
+	 * applications are required to retrieve the scan data anyway
+	 * and no data is included in the event, this codifies that
+	 * practice.
+	 */
+	if (WARN_ON(cmd == SIOCGIWSCAN && extra))
+		extra = NULL;
+
+	/* Get the description of the Event */
+	if (cmd <= SIOCIWLAST) {
+		cmd_index = cmd - SIOCIWFIRST;
+		if (cmd_index < standard_ioctl_num)
+			descr = &(standard_ioctl[cmd_index]);
+	} else {
+		cmd_index = cmd - IWEVFIRST;
+		if (cmd_index < standard_event_num)
+			descr = &(standard_event[cmd_index]);
+	}
+	/* Don't accept unknown events */
+	if (descr == NULL) {
+		/* Note : we don't return an error to the driver, because
+		 * the driver would not know what to do about it. It can't
+		 * return an error to the user, because the event is not
+		 * initiated by a user request.
+		 * The best the driver could do is to log an error message.
+		 * We will do it ourselves instead...
+		 */
+		printk(KERN_ERR "%s (WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
+		       dev->name, cmd);
+		return;
+	}
+
+	/* Check extra parameters and set extra_len */
+	if (descr->header_type == IW_HEADER_TYPE_POINT) {
+		/* Check if number of token fits within bounds */
+		if (wrqu->data.length > descr->max_tokens) {
+			printk(KERN_ERR "%s (WE) : Wireless Event too big (%d)\n", dev->name, wrqu->data.length);
+			return;
+		}
+		if (wrqu->data.length < descr->min_tokens) {
+			printk(KERN_ERR "%s (WE) : Wireless Event too small (%d)\n", dev->name, wrqu->data.length);
+			return;
+		}
+		/* Calculate extra_len - extra is NULL for restricted events */
+		if (extra != NULL)
+			extra_len = wrqu->data.length * descr->token_size;
+		/* Always at an offset in wrqu */
+		wrqu_off = IW_EV_POINT_OFF;
+	}
+
+	/* Total length of the event */
+	hdr_len = event_type_size[descr->header_type];
+	event_len = hdr_len + extra_len;
+
+	/*
+	 * The problem for 64/32 bit.
+	 *
+	 * On 64-bit, a regular event is laid out as follows:
+	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
+	 *      | event.len | event.cmd |     p a d d i n g     |
+	 *      | wrqu data ... (with the correct size)         |
+	 *
+	 * This padding exists because we manipulate event->u,
+	 * and 'event' is not packed.
+	 *
+	 * An iw_point event is laid out like this instead:
+	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
+	 *      | event.len | event.cmd |     p a d d i n g     |
+	 *      | iwpnt.len | iwpnt.flg |     p a d d i n g     |
+	 *      | extra data  ...
+	 *
+	 * The second padding exists because struct iw_point is extended,
+	 * but this depends on the platform...
+	 *
+	 * On 32-bit, all the padding shouldn't be there.
+	 */
+
+	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!skb)
+		return;
+
+	/* Send via the RtNetlink event channel */
+	nlh = rtnetlink_ifinfo_prep(dev, skb);
+	if (WARN_ON(!nlh)) {
+		kfree_skb(skb);
+		return;
+	}
+
+	/* Add the wireless events in the netlink packet */
+	nla = nla_reserve(skb, IFLA_WIRELESS, event_len);
+	if (!nla) {
+		kfree_skb(skb);
+		return;
+	}
+	event = nla_data(nla);
+
+	/* Fill event - first clear to avoid data leaking */
+	memset(event, 0, hdr_len);
+	event->len = event_len;
+	event->cmd = cmd;
+	memcpy(&event->u, ((char *) wrqu) + wrqu_off, hdr_len - IW_EV_LCP_LEN);
+	if (extra_len)
+		memcpy(((char *) event) + hdr_len, extra, extra_len);
+
+	nlmsg_end(skb, nlh);
+#ifdef CONFIG_COMPAT
+	hdr_len = compat_event_type_size[descr->header_type];
+	event_len = hdr_len + extra_len;
+
+	compskb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
+	if (!compskb) {
+		kfree_skb(skb);
+		return;
+	}
+
+	/* Send via the RtNetlink event channel */
+	nlh = rtnetlink_ifinfo_prep(dev, compskb);
+	if (WARN_ON(!nlh)) {
+		kfree_skb(skb);
+		kfree_skb(compskb);
+		return;
+	}
+
+	/* Add the wireless events in the netlink packet */
+	nla = nla_reserve(compskb, IFLA_WIRELESS, event_len);
+	if (!nla) {
+		kfree_skb(skb);
+		kfree_skb(compskb);
+		return;
+	}
+	compat_event = nla_data(nla);
+
+	compat_event->len = event_len;
+	compat_event->cmd = cmd;
+	if (descr->header_type == IW_HEADER_TYPE_POINT) {
+		compat_wrqu.length = wrqu->data.length;
+		compat_wrqu.flags = wrqu->data.flags;
+		memcpy(&compat_event->pointer,
+			((char *) &compat_wrqu) + IW_EV_COMPAT_POINT_OFF,
+			hdr_len - IW_EV_COMPAT_LCP_LEN);
+		if (extra_len)
+			memcpy(((char *) compat_event) + hdr_len,
+				extra, extra_len);
+	} else {
+		/* extra_len must be zero, so no if (extra) needed */
+		memcpy(&compat_event->pointer, wrqu,
+			hdr_len - IW_EV_COMPAT_LCP_LEN);
+	}
+
+	nlmsg_end(compskb, nlh);
+
+	skb_shinfo(skb)->frag_list = compskb;
+#endif
+	skb_queue_tail(&dev_net(dev)->wext_nlevents, skb);
+	schedule_work(&wireless_nlevent_work);
+}
+EXPORT_SYMBOL(wireless_send_event);
+
+
+
+/* IW handlers */
+
+struct iw_statistics *get_wireless_stats(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	if ((dev->wireless_handlers != NULL) &&
+	   (dev->wireless_handlers->get_wireless_stats != NULL))
+		return dev->wireless_handlers->get_wireless_stats(dev);
+#endif
+
+#ifdef CONFIG_CFG80211_WEXT
+	if (dev->ieee80211_ptr && dev->ieee80211_ptr &&
+	    dev->ieee80211_ptr->wiphy &&
+	    dev->ieee80211_ptr->wiphy->wext &&
+	    dev->ieee80211_ptr->wiphy->wext->get_wireless_stats)
+		return dev->ieee80211_ptr->wiphy->wext->get_wireless_stats(dev);
+#endif
+
+	/* not found */
+	return NULL;
+}
+
+static int iw_handler_get_iwstats(struct net_device *		dev,
+				  struct iw_request_info *	info,
+				  union iwreq_data *		wrqu,
+				  char *			extra)
+{
+	/* Get stats from the driver */
+	struct iw_statistics *stats;
+
+	stats = get_wireless_stats(dev);
+	if (stats) {
+		/* Copy statistics to extra */
+		memcpy(extra, stats, sizeof(struct iw_statistics));
+		wrqu->data.length = sizeof(struct iw_statistics);
+
+		/* Check if we need to clear the updated flag */
+		if (wrqu->data.flags != 0)
+			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
+		return 0;
+	} else
+		return -EOPNOTSUPP;
+}
+
+static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
+{
+	/* Don't "optimise" the following variable, it will crash */
+	unsigned int	index;		/* *MUST* be unsigned */
+	const struct iw_handler_def *handlers = NULL;
+
+#ifdef CONFIG_CFG80211_WEXT
+	if (dev->ieee80211_ptr && dev->ieee80211_ptr->wiphy)
+		handlers = dev->ieee80211_ptr->wiphy->wext;
+#endif
+#ifdef CONFIG_WIRELESS_EXT
+	if (dev->wireless_handlers)
+		handlers = dev->wireless_handlers;
+#endif
+
+	if (!handlers)
+		return NULL;
+
+	/* Try as a standard command */
+	index = cmd - SIOCIWFIRST;
+	if (index < handlers->num_standard)
+		return handlers->standard[index];
+
+#ifdef CONFIG_WEXT_PRIV
+	/* Try as a private command */
+	index = cmd - SIOCIWFIRSTPRIV;
+	if (index < handlers->num_private)
+		return handlers->private[index];
+#endif
+
+	/* Not found */
+	return NULL;
+}
+
+static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
+				   const struct iw_ioctl_description *descr,
+				   iw_handler handler, struct net_device *dev,
+				   struct iw_request_info *info)
+{
+	int err, extra_size, user_length = 0, essid_compat = 0;
+	char *extra;
+
+	/* Calculate space needed by arguments. Always allocate
+	 * for max space.
+	 */
+	extra_size = descr->max_tokens * descr->token_size;
+
+	/* Check need for ESSID compatibility for WE < 21 */
+	switch (cmd) {
+	case SIOCSIWESSID:
+	case SIOCGIWESSID:
+	case SIOCSIWNICKN:
+	case SIOCGIWNICKN:
+		if (iwp->length == descr->max_tokens + 1)
+			essid_compat = 1;
+		else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+			char essid[IW_ESSID_MAX_SIZE + 1];
+			unsigned int len;
+			len = iwp->length * descr->token_size;
+
+			if (len > IW_ESSID_MAX_SIZE)
+				return -EFAULT;
+
+			err = copy_from_user(essid, iwp->pointer, len);
+			if (err)
+				return -EFAULT;
+
+			if (essid[iwp->length - 1] == '\0')
+				essid_compat = 1;
+		}
+		break;
+	default:
+		break;
+	}
+
+	iwp->length -= essid_compat;
+
+	/* Check what user space is giving us */
+	if (IW_IS_SET(cmd)) {
+		/* Check NULL pointer */
+		if (!iwp->pointer && iwp->length != 0)
+			return -EFAULT;
+		/* Check if number of token fits within bounds */
+		if (iwp->length > descr->max_tokens)
+			return -E2BIG;
+		if (iwp->length < descr->min_tokens)
+			return -EINVAL;
+	} else {
+		/* Check NULL pointer */
+		if (!iwp->pointer)
+			return -EFAULT;
+		/* Save user space buffer size for checking */
+		user_length = iwp->length;
+
+		/* Don't check if user_length > max to allow forward
+		 * compatibility. The test user_length < min is
+		 * implied by the test at the end.
+		 */
+
+		/* Support for very large requests */
+		if ((descr->flags & IW_DESCR_FLAG_NOMAX) &&
+		    (user_length > descr->max_tokens)) {
+			/* Allow userspace to GET more than max so
+			 * we can support any size GET requests.
+			 * There is still a limit : -ENOMEM.
+			 */
+			extra_size = user_length * descr->token_size;
+
+			/* Note : user_length is originally a __u16,
+			 * and token_size is controlled by us,
+			 * so extra_size won't get negative and
+			 * won't overflow...
+			 */
+		}
+	}
+
+	/* kzalloc() ensures NULL-termination for essid_compat. */
+	extra = kzalloc(extra_size, GFP_KERNEL);
+	if (!extra)
+		return -ENOMEM;
+
+	/* If it is a SET, get all the extra data in here */
+	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+		if (copy_from_user(extra, iwp->pointer,
+				   iwp->length *
+				   descr->token_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+
+		if (cmd == SIOCSIWENCODEEXT) {
+			struct iw_encode_ext *ee = (void *) extra;
+
+			if (iwp->length < sizeof(*ee) + ee->key_len)
+				return -EFAULT;
+		}
+	}
+
+	err = handler(dev, info, (union iwreq_data *) iwp, extra);
+
+	iwp->length += essid_compat;
+
+	/* If we have something to return to the user */
+	if (!err && IW_IS_GET(cmd)) {
+		/* Check if there is enough buffer up there */
+		if (user_length < iwp->length) {
+			err = -E2BIG;
+			goto out;
+		}
+
+		if (copy_to_user(iwp->pointer, extra,
+				 iwp->length *
+				 descr->token_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+	}
+
+	/* Generate an event to notify listeners of the change */
+	if ((descr->flags & IW_DESCR_FLAG_EVENT) && err == -EIWCOMMIT) {
+		union iwreq_data *data = (union iwreq_data *) iwp;
+
+		if (descr->flags & IW_DESCR_FLAG_RESTRICT)
+			/* If the event is restricted, don't
+			 * export the payload.
+			 */
+			wireless_send_event(dev, cmd, data, NULL);
+		else
+			wireless_send_event(dev, cmd, data, extra);
+	}
+
+out:
+	kfree(extra);
+	return err;
+}
+
+/*
+ * Call the commit handler in the driver
+ * (if exist and if conditions are right)
+ *
+ * Note : our current commit strategy is currently pretty dumb,
+ * but we will be able to improve on that...
+ * The goal is to try to agreagate as many changes as possible
+ * before doing the commit. Drivers that will define a commit handler
+ * are usually those that need a reset after changing parameters, so
+ * we want to minimise the number of reset.
+ * A cool idea is to use a timer : at each "set" command, we re-set the
+ * timer, when the timer eventually fires, we call the driver.
+ * Hopefully, more on that later.
+ *
+ * Also, I'm waiting to see how many people will complain about the
+ * netif_running(dev) test. I'm open on that one...
+ * Hopefully, the driver will remember to do a commit in "open()" ;-)
+ */
+int call_commit_handler(struct net_device *dev)
+{
+#ifdef CONFIG_WIRELESS_EXT
+	if ((netif_running(dev)) &&
+	   (dev->wireless_handlers->standard[0] != NULL))
+		/* Call the commit handler on the driver */
+		return dev->wireless_handlers->standard[0](dev, NULL,
+							   NULL, NULL);
+	else
+		return 0;		/* Command completed successfully */
+#else
+	/* cfg80211 has no commit */
+	return 0;
+#endif
+}
+
+/*
+ * Main IOCTl dispatcher.
+ * Check the type of IOCTL and call the appropriate wrapper...
+ */
+static int wireless_process_ioctl(struct net *net, struct ifreq *ifr,
+				  unsigned int cmd,
+				  struct iw_request_info *info,
+				  wext_ioctl_func standard,
+				  wext_ioctl_func private)
+{
+	struct iwreq *iwr = (struct iwreq *) ifr;
+	struct net_device *dev;
+	iw_handler	handler;
+
+	/* Permissions are already checked in dev_ioctl() before calling us.
+	 * The copy_to/from_user() of ifr is also dealt with in there */
+
+	/* Make sure the device exist */
+	if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)
+		return -ENODEV;
+
+	/* A bunch of special cases, then the generic case...
+	 * Note that 'cmd' is already filtered in dev_ioctl() with
+	 * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */
+	if (cmd == SIOCGIWSTATS)
+		return standard(dev, iwr, cmd, info,
+				&iw_handler_get_iwstats);
+
+#ifdef CONFIG_WEXT_PRIV
+	if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
+		return standard(dev, iwr, cmd, info,
+				iw_handler_get_private);
+#endif
+
+	/* Basic check */
+	if (!netif_device_present(dev))
+		return -ENODEV;
+
+	/* New driver API : try to find the handler */
+	handler = get_handler(dev, cmd);
+	if (handler) {
+		/* Standard and private are not the same */
+		if (cmd < SIOCIWFIRSTPRIV)
+			return standard(dev, iwr, cmd, info, handler);
+		else if (private)
+			return private(dev, iwr, cmd, info, handler);
+	}
+	/* Old driver API : call driver ioctl handler */
+	if (dev->netdev_ops->ndo_do_ioctl)
+		return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
+	return -EOPNOTSUPP;
+}
+
+/* If command is `set a parameter', or `get the encoding parameters',
+ * check if the user has the right to do it.
+ */
+static int wext_permission_check(unsigned int cmd)
+{
+	if ((IW_IS_SET(cmd) || cmd == SIOCGIWENCODE || cmd == SIOCGIWENCODEEXT)
+	    && !capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	return 0;
+}
+
+/* entry point from dev ioctl */
+static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr,
+			       unsigned int cmd, struct iw_request_info *info,
+			       wext_ioctl_func standard,
+			       wext_ioctl_func private)
+{
+	int ret = wext_permission_check(cmd);
+
+	if (ret)
+		return ret;
+
+	dev_load(net, ifr->ifr_name);
+	rtnl_lock();
+	ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private);
+	rtnl_unlock();
+
+	return ret;
+}
+
+/*
+ * Wrapper to call a standard Wireless Extension handler.
+ * We do various checks and also take care of moving data between
+ * user space and kernel space.
+ */
+static int ioctl_standard_call(struct net_device *	dev,
+			       struct iwreq		*iwr,
+			       unsigned int		cmd,
+			       struct iw_request_info	*info,
+			       iw_handler		handler)
+{
+	const struct iw_ioctl_description *	descr;
+	int					ret = -EINVAL;
+
+	/* Get the description of the IOCTL */
+	if ((cmd - SIOCIWFIRST) >= standard_ioctl_num)
+		return -EOPNOTSUPP;
+	descr = &(standard_ioctl[cmd - SIOCIWFIRST]);
+
+	/* Check if we have a pointer to user space data or not */
+	if (descr->header_type != IW_HEADER_TYPE_POINT) {
+
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), NULL);
+
+		/* Generate an event to notify listeners of the change */
+		if ((descr->flags & IW_DESCR_FLAG_EVENT) &&
+		   ((ret == 0) || (ret == -EIWCOMMIT)))
+			wireless_send_event(dev, cmd, &(iwr->u), NULL);
+	} else {
+		ret = ioctl_standard_iw_point(&iwr->u.data, cmd, descr,
+					      handler, dev, info);
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	/* Here, we will generate the appropriate event if needed */
+
+	return ret;
+}
+
+
+int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
+		      void __user *arg)
+{
+	struct iw_request_info info = { .cmd = cmd, .flags = 0 };
+	int ret;
+
+	ret = wext_ioctl_dispatch(net, ifr, cmd, &info,
+				  ioctl_standard_call,
+				  ioctl_private_call);
+	if (ret >= 0 &&
+	    IW_IS_GET(cmd) &&
+	    copy_to_user(arg, ifr, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+static int compat_standard_call(struct net_device	*dev,
+				struct iwreq		*iwr,
+				unsigned int		cmd,
+				struct iw_request_info	*info,
+				iw_handler		handler)
+{
+	const struct iw_ioctl_description *descr;
+	struct compat_iw_point *iwp_compat;
+	struct iw_point iwp;
+	int err;
+
+	descr = standard_ioctl + (cmd - SIOCIWFIRST);
+
+	if (descr->header_type != IW_HEADER_TYPE_POINT)
+		return ioctl_standard_call(dev, iwr, cmd, info, handler);
+
+	iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+	iwp.pointer = compat_ptr(iwp_compat->pointer);
+	iwp.length = iwp_compat->length;
+	iwp.flags = iwp_compat->flags;
+
+	err = ioctl_standard_iw_point(&iwp, cmd, descr, handler, dev, info);
+
+	iwp_compat->pointer = ptr_to_compat(iwp.pointer);
+	iwp_compat->length = iwp.length;
+	iwp_compat->flags = iwp.flags;
+
+	return err;
+}
+
+int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
+			     unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	struct iw_request_info info;
+	struct iwreq iwr;
+	char *colon;
+	int ret;
+
+	if (copy_from_user(&iwr, argp, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	iwr.ifr_name[IFNAMSIZ-1] = 0;
+	colon = strchr(iwr.ifr_name, ':');
+	if (colon)
+		*colon = 0;
+
+	info.cmd = cmd;
+	info.flags = IW_REQUEST_FLAG_COMPAT;
+
+	ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info,
+				  compat_standard_call,
+				  compat_private_call);
+
+	if (ret >= 0 &&
+	    IW_IS_GET(cmd) &&
+	    copy_to_user(argp, &iwr, sizeof(struct iwreq)))
+		return -EFAULT;
+
+	return ret;
+}
+#endif
diff --git a/net/wireless/wext-priv.c b/net/wireless/wext-priv.c
new file mode 100644
index 0000000..a3c2277
--- /dev/null
+++ b/net/wireless/wext-priv.c
@@ -0,0 +1,248 @@
+/*
+ * This file implement the Wireless Extensions priv API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ * Copyright	2009 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <net/iw_handler.h>
+#include <net/wext.h>
+
+int iw_handler_get_private(struct net_device *		dev,
+			   struct iw_request_info *	info,
+			   union iwreq_data *		wrqu,
+			   char *			extra)
+{
+	/* Check if the driver has something to export */
+	if ((dev->wireless_handlers->num_private_args == 0) ||
+	   (dev->wireless_handlers->private_args == NULL))
+		return -EOPNOTSUPP;
+
+	/* Check if there is enough buffer up there */
+	if (wrqu->data.length < dev->wireless_handlers->num_private_args) {
+		/* User space can't know in advance how large the buffer
+		 * needs to be. Give it a hint, so that we can support
+		 * any size buffer we want somewhat efficiently... */
+		wrqu->data.length = dev->wireless_handlers->num_private_args;
+		return -E2BIG;
+	}
+
+	/* Set the number of available ioctls. */
+	wrqu->data.length = dev->wireless_handlers->num_private_args;
+
+	/* Copy structure to the user buffer. */
+	memcpy(extra, dev->wireless_handlers->private_args,
+	       sizeof(struct iw_priv_args) * wrqu->data.length);
+
+	return 0;
+}
+
+/* Size (in bytes) of the various private data types */
+static const char iw_priv_type_size[] = {
+	0,				/* IW_PRIV_TYPE_NONE */
+	1,				/* IW_PRIV_TYPE_BYTE */
+	1,				/* IW_PRIV_TYPE_CHAR */
+	0,				/* Not defined */
+	sizeof(__u32),			/* IW_PRIV_TYPE_INT */
+	sizeof(struct iw_freq),		/* IW_PRIV_TYPE_FLOAT */
+	sizeof(struct sockaddr),	/* IW_PRIV_TYPE_ADDR */
+	0,				/* Not defined */
+};
+
+static int get_priv_size(__u16 args)
+{
+	int	num = args & IW_PRIV_SIZE_MASK;
+	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
+
+	return num * iw_priv_type_size[type];
+}
+
+static int adjust_priv_size(__u16 args, struct iw_point *iwp)
+{
+	int	num = iwp->length;
+	int	max = args & IW_PRIV_SIZE_MASK;
+	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
+
+	/* Make sure the driver doesn't goof up */
+	if (max < num)
+		num = max;
+
+	return num * iw_priv_type_size[type];
+}
+
+/*
+ * Wrapper to call a private Wireless Extension handler.
+ * We do various checks and also take care of moving data between
+ * user space and kernel space.
+ * It's not as nice and slimline as the standard wrapper. The cause
+ * is struct iw_priv_args, which was not really designed for the
+ * job we are going here.
+ *
+ * IMPORTANT : This function prevent to set and get data on the same
+ * IOCTL and enforce the SET/GET convention. Not doing it would be
+ * far too hairy...
+ * If you need to set and get data at the same time, please don't use
+ * a iw_handler but process it in your ioctl handler (i.e. use the
+ * old driver API).
+ */
+static int get_priv_descr_and_size(struct net_device *dev, unsigned int cmd,
+				   const struct iw_priv_args **descrp)
+{
+	const struct iw_priv_args *descr;
+	int i, extra_size;
+
+	descr = NULL;
+	for (i = 0; i < dev->wireless_handlers->num_private_args; i++) {
+		if (cmd == dev->wireless_handlers->private_args[i].cmd) {
+			descr = &dev->wireless_handlers->private_args[i];
+			break;
+		}
+	}
+
+	extra_size = 0;
+	if (descr) {
+		if (IW_IS_SET(cmd)) {
+			int	offset = 0;	/* For sub-ioctls */
+			/* Check for sub-ioctl handler */
+			if (descr->name[0] == '\0')
+				/* Reserve one int for sub-ioctl index */
+				offset = sizeof(__u32);
+
+			/* Size of set arguments */
+			extra_size = get_priv_size(descr->set_args);
+
+			/* Does it fits in iwr ? */
+			if ((descr->set_args & IW_PRIV_SIZE_FIXED) &&
+			   ((extra_size + offset) <= IFNAMSIZ))
+				extra_size = 0;
+		} else {
+			/* Size of get arguments */
+			extra_size = get_priv_size(descr->get_args);
+
+			/* Does it fits in iwr ? */
+			if ((descr->get_args & IW_PRIV_SIZE_FIXED) &&
+			   (extra_size <= IFNAMSIZ))
+				extra_size = 0;
+		}
+	}
+	*descrp = descr;
+	return extra_size;
+}
+
+static int ioctl_private_iw_point(struct iw_point *iwp, unsigned int cmd,
+				  const struct iw_priv_args *descr,
+				  iw_handler handler, struct net_device *dev,
+				  struct iw_request_info *info, int extra_size)
+{
+	char *extra;
+	int err;
+
+	/* Check what user space is giving us */
+	if (IW_IS_SET(cmd)) {
+		if (!iwp->pointer && iwp->length != 0)
+			return -EFAULT;
+
+		if (iwp->length > (descr->set_args & IW_PRIV_SIZE_MASK))
+			return -E2BIG;
+	} else if (!iwp->pointer)
+		return -EFAULT;
+
+	extra = kmalloc(extra_size, GFP_KERNEL);
+	if (!extra)
+		return -ENOMEM;
+
+	/* If it is a SET, get all the extra data in here */
+	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
+		if (copy_from_user(extra, iwp->pointer, extra_size)) {
+			err = -EFAULT;
+			goto out;
+		}
+	}
+
+	/* Call the handler */
+	err = handler(dev, info, (union iwreq_data *) iwp, extra);
+
+	/* If we have something to return to the user */
+	if (!err && IW_IS_GET(cmd)) {
+		/* Adjust for the actual length if it's variable,
+		 * avoid leaking kernel bits outside.
+		 */
+		if (!(descr->get_args & IW_PRIV_SIZE_FIXED))
+			extra_size = adjust_priv_size(descr->get_args, iwp);
+
+		if (copy_to_user(iwp->pointer, extra, extra_size))
+			err =  -EFAULT;
+	}
+
+out:
+	kfree(extra);
+	return err;
+}
+
+int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
+		       unsigned int cmd, struct iw_request_info *info,
+		       iw_handler handler)
+{
+	int extra_size = 0, ret = -EINVAL;
+	const struct iw_priv_args *descr;
+
+	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
+
+	/* Check if we have a pointer to user space data or not. */
+	if (extra_size == 0) {
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
+	} else {
+		ret = ioctl_private_iw_point(&iwr->u.data, cmd, descr,
+					     handler, dev, info, extra_size);
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	return ret;
+}
+
+#ifdef CONFIG_COMPAT
+int compat_private_call(struct net_device *dev, struct iwreq *iwr,
+			unsigned int cmd, struct iw_request_info *info,
+			iw_handler handler)
+{
+	const struct iw_priv_args *descr;
+	int ret, extra_size;
+
+	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
+
+	/* Check if we have a pointer to user space data or not. */
+	if (extra_size == 0) {
+		/* No extra arguments. Trivial to handle */
+		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
+	} else {
+		struct compat_iw_point *iwp_compat;
+		struct iw_point iwp;
+
+		iwp_compat = (struct compat_iw_point *) &iwr->u.data;
+		iwp.pointer = compat_ptr(iwp_compat->pointer);
+		iwp.length = iwp_compat->length;
+		iwp.flags = iwp_compat->flags;
+
+		ret = ioctl_private_iw_point(&iwp, cmd, descr,
+					     handler, dev, info, extra_size);
+
+		iwp_compat->pointer = ptr_to_compat(iwp.pointer);
+		iwp_compat->length = iwp.length;
+		iwp_compat->flags = iwp.flags;
+	}
+
+	/* Call commit handler if needed and defined */
+	if (ret == -EIWCOMMIT)
+		ret = call_commit_handler(dev);
+
+	return ret;
+}
+#endif
diff --git a/net/wireless/wext-proc.c b/net/wireless/wext-proc.c
new file mode 100644
index 0000000..273a7f7
--- /dev/null
+++ b/net/wireless/wext-proc.c
@@ -0,0 +1,155 @@
+/*
+ * This file implement the Wireless Extensions proc API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+
+/*
+ * The /proc/net/wireless file is a human readable user-space interface
+ * exporting various wireless specific statistics from the wireless devices.
+ * This is the most popular part of the Wireless Extensions ;-)
+ *
+ * This interface is a pure clone of /proc/net/dev (in net/core/dev.c).
+ * The content of the file is basically the content of "struct iw_statistics".
+ */
+
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <net/iw_handler.h>
+#include <net/wext.h>
+
+
+static void wireless_seq_printf_stats(struct seq_file *seq,
+				      struct net_device *dev)
+{
+	/* Get stats from the driver */
+	struct iw_statistics *stats = get_wireless_stats(dev);
+	static struct iw_statistics nullstats = {};
+
+	/* show device if it's wireless regardless of current stats */
+	if (!stats) {
+#ifdef CONFIG_WIRELESS_EXT
+		if (dev->wireless_handlers)
+			stats = &nullstats;
+#endif
+#ifdef CONFIG_CFG80211
+		if (dev->ieee80211_ptr)
+			stats = &nullstats;
+#endif
+	}
+
+	if (stats) {
+		seq_printf(seq, "%6s: %04x  %3d%c  %3d%c  %3d%c  %6d %6d %6d "
+				"%6d %6d   %6d\n",
+			   dev->name, stats->status, stats->qual.qual,
+			   stats->qual.updated & IW_QUAL_QUAL_UPDATED
+			   ? '.' : ' ',
+			   ((__s32) stats->qual.level) -
+			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
+			   stats->qual.updated & IW_QUAL_LEVEL_UPDATED
+			   ? '.' : ' ',
+			   ((__s32) stats->qual.noise) -
+			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
+			   stats->qual.updated & IW_QUAL_NOISE_UPDATED
+			   ? '.' : ' ',
+			   stats->discard.nwid, stats->discard.code,
+			   stats->discard.fragment, stats->discard.retries,
+			   stats->discard.misc, stats->miss.beacon);
+
+		if (stats != &nullstats)
+			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
+	}
+}
+
+/* ---------------------------------------------------------------- */
+/*
+ * Print info for /proc/net/wireless (print all entries)
+ */
+static int wireless_dev_seq_show(struct seq_file *seq, void *v)
+{
+	might_sleep();
+
+	if (v == SEQ_START_TOKEN)
+		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
+				"packets               | Missed | WE\n"
+				" face | tus | link level noise |  nwid  "
+				"crypt   frag  retry   misc | beacon | %d\n",
+			   WIRELESS_EXT);
+	else
+		wireless_seq_printf_stats(seq, v);
+	return 0;
+}
+
+static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+	loff_t off;
+	struct net_device *dev;
+
+	rtnl_lock();
+	if (!*pos)
+		return SEQ_START_TOKEN;
+
+	off = 1;
+	for_each_netdev(net, dev)
+		if (off++ == *pos)
+			return dev;
+	return NULL;
+}
+
+static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+	struct net *net = seq_file_net(seq);
+
+	++*pos;
+
+	return v == SEQ_START_TOKEN ?
+		first_net_device(net) : next_net_device(v);
+}
+
+static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
+{
+	rtnl_unlock();
+}
+
+static const struct seq_operations wireless_seq_ops = {
+	.start = wireless_dev_seq_start,
+	.next  = wireless_dev_seq_next,
+	.stop  = wireless_dev_seq_stop,
+	.show  = wireless_dev_seq_show,
+};
+
+static int seq_open_wireless(struct inode *inode, struct file *file)
+{
+	return seq_open_net(inode, file, &wireless_seq_ops,
+			    sizeof(struct seq_net_private));
+}
+
+static const struct file_operations wireless_seq_fops = {
+	.owner	 = THIS_MODULE,
+	.open    = seq_open_wireless,
+	.read    = seq_read,
+	.llseek  = seq_lseek,
+	.release = seq_release_net,
+};
+
+int wext_proc_init(struct net *net)
+{
+	/* Create /proc/net/wireless entry */
+	if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
+		return -ENOMEM;
+
+	return 0;
+}
+
+void wext_proc_exit(struct net *net)
+{
+	proc_net_remove(net, "wireless");
+}
diff --git a/net/wireless/wext-spy.c b/net/wireless/wext-spy.c
new file mode 100644
index 0000000..6dcfe65
--- /dev/null
+++ b/net/wireless/wext-spy.c
@@ -0,0 +1,231 @@
+/*
+ * This file implement the Wireless Extensions spy API.
+ *
+ * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
+ * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
+ *
+ * (As all part of the Linux kernel, this file is GPL)
+ */
+
+#include <linux/wireless.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <net/iw_handler.h>
+#include <net/arp.h>
+#include <net/wext.h>
+
+static inline struct iw_spy_data *get_spydata(struct net_device *dev)
+{
+	/* This is the new way */
+	if (dev->wireless_data)
+		return dev->wireless_data->spy_data;
+	return NULL;
+}
+
+int iw_handler_set_spy(struct net_device *	dev,
+		       struct iw_request_info *	info,
+		       union iwreq_data *	wrqu,
+		       char *			extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct sockaddr *	address = (struct sockaddr *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Disable spy collection while we copy the addresses.
+	 * While we copy addresses, any call to wireless_spy_update()
+	 * will NOP. This is OK, as anyway the addresses are changing. */
+	spydata->spy_number = 0;
+
+	/* We want to operate without locking, because wireless_spy_update()
+	 * most likely will happen in the interrupt handler, and therefore
+	 * have its own locking constraints and needs performance.
+	 * The rtnl_lock() make sure we don't race with the other iw_handlers.
+	 * This make sure wireless_spy_update() "see" that the spy list
+	 * is temporarily disabled. */
+	smp_wmb();
+
+	/* Are there are addresses to copy? */
+	if (wrqu->data.length > 0) {
+		int i;
+
+		/* Copy addresses */
+		for (i = 0; i < wrqu->data.length; i++)
+			memcpy(spydata->spy_address[i], address[i].sa_data,
+			       ETH_ALEN);
+		/* Reset stats */
+		memset(spydata->spy_stat, 0,
+		       sizeof(struct iw_quality) * IW_MAX_SPY);
+	}
+
+	/* Make sure above is updated before re-enabling */
+	smp_wmb();
+
+	/* Enable addresses */
+	spydata->spy_number = wrqu->data.length;
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_set_spy);
+
+int iw_handler_get_spy(struct net_device *	dev,
+		       struct iw_request_info *	info,
+		       union iwreq_data *	wrqu,
+		       char *			extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct sockaddr *	address = (struct sockaddr *) extra;
+	int			i;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	wrqu->data.length = spydata->spy_number;
+
+	/* Copy addresses. */
+	for (i = 0; i < spydata->spy_number; i++) 	{
+		memcpy(address[i].sa_data, spydata->spy_address[i], ETH_ALEN);
+		address[i].sa_family = AF_UNIX;
+	}
+	/* Copy stats to the user buffer (just after). */
+	if (spydata->spy_number > 0)
+		memcpy(extra  + (sizeof(struct sockaddr) *spydata->spy_number),
+		       spydata->spy_stat,
+		       sizeof(struct iw_quality) * spydata->spy_number);
+	/* Reset updated flags. */
+	for (i = 0; i < spydata->spy_number; i++)
+		spydata->spy_stat[i].updated &= ~IW_QUAL_ALL_UPDATED;
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_get_spy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Standard Wireless Handler : set spy threshold
+ */
+int iw_handler_set_thrspy(struct net_device *	dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *	wrqu,
+			  char *		extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Just do it */
+	memcpy(&(spydata->spy_thr_low), &(threshold->low),
+	       2 * sizeof(struct iw_quality));
+
+	/* Clear flag */
+	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_set_thrspy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Standard Wireless Handler : get spy threshold
+ */
+int iw_handler_get_thrspy(struct net_device *	dev,
+			  struct iw_request_info *info,
+			  union iwreq_data *	wrqu,
+			  char *		extra)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return -EOPNOTSUPP;
+
+	/* Just do it */
+	memcpy(&(threshold->low), &(spydata->spy_thr_low),
+	       2 * sizeof(struct iw_quality));
+
+	return 0;
+}
+EXPORT_SYMBOL(iw_handler_get_thrspy);
+
+/*------------------------------------------------------------------*/
+/*
+ * Prepare and send a Spy Threshold event
+ */
+static void iw_send_thrspy_event(struct net_device *	dev,
+				 struct iw_spy_data *	spydata,
+				 unsigned char *	address,
+				 struct iw_quality *	wstats)
+{
+	union iwreq_data	wrqu;
+	struct iw_thrspy	threshold;
+
+	/* Init */
+	wrqu.data.length = 1;
+	wrqu.data.flags = 0;
+	/* Copy address */
+	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
+	threshold.addr.sa_family = ARPHRD_ETHER;
+	/* Copy stats */
+	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
+	/* Copy also thresholds */
+	memcpy(&(threshold.low), &(spydata->spy_thr_low),
+	       2 * sizeof(struct iw_quality));
+
+	/* Send event to user space */
+	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
+}
+
+/* ---------------------------------------------------------------- */
+/*
+ * Call for the driver to update the spy data.
+ * For now, the spy data is a simple array. As the size of the array is
+ * small, this is good enough. If we wanted to support larger number of
+ * spy addresses, we should use something more efficient...
+ */
+void wireless_spy_update(struct net_device *	dev,
+			 unsigned char *	address,
+			 struct iw_quality *	wstats)
+{
+	struct iw_spy_data *	spydata = get_spydata(dev);
+	int			i;
+	int			match = -1;
+
+	/* Make sure driver is not buggy or using the old API */
+	if (!spydata)
+		return;
+
+	/* Update all records that match */
+	for (i = 0; i < spydata->spy_number; i++)
+		if (!compare_ether_addr(address, spydata->spy_address[i])) {
+			memcpy(&(spydata->spy_stat[i]), wstats,
+			       sizeof(struct iw_quality));
+			match = i;
+		}
+
+	/* Generate an event if we cross the spy threshold.
+	 * To avoid event storms, we have a simple hysteresis : we generate
+	 * event only when we go under the low threshold or above the
+	 * high threshold. */
+	if (match >= 0) {
+		if (spydata->spy_thr_under[match]) {
+			if (wstats->level > spydata->spy_thr_high.level) {
+				spydata->spy_thr_under[match] = 0;
+				iw_send_thrspy_event(dev, spydata,
+						     address, wstats);
+			}
+		} else {
+			if (wstats->level < spydata->spy_thr_low.level) {
+				spydata->spy_thr_under[match] = 1;
+				iw_send_thrspy_event(dev, spydata,
+						     address, wstats);
+			}
+		}
+	}
+}
+EXPORT_SYMBOL(wireless_spy_update);
diff --git a/net/wireless/wext.c b/net/wireless/wext.c
deleted file mode 100644
index 60fe5776..0000000
--- a/net/wireless/wext.c
+++ /dev/null
@@ -1,1775 +0,0 @@
-/*
- * This file implement the Wireless Extensions APIs.
- *
- * Authors :	Jean Tourrilhes - HPL - <jt@hpl.hp.com>
- * Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
- *
- * (As all part of the Linux kernel, this file is GPL)
- */
-
-/************************** DOCUMENTATION **************************/
-/*
- * API definition :
- * --------------
- * See <linux/wireless.h> for details of the APIs and the rest.
- *
- * History :
- * -------
- *
- * v1 - 5.12.01 - Jean II
- *	o Created this file.
- *
- * v2 - 13.12.01 - Jean II
- *	o Move /proc/net/wireless stuff from net/core/dev.c to here
- *	o Make Wireless Extension IOCTLs go through here
- *	o Added iw_handler handling ;-)
- *	o Added standard ioctl description
- *	o Initial dumb commit strategy based on orinoco.c
- *
- * v3 - 19.12.01 - Jean II
- *	o Make sure we don't go out of standard_ioctl[] in ioctl_standard_call
- *	o Add event dispatcher function
- *	o Add event description
- *	o Propagate events as rtnetlink IFLA_WIRELESS option
- *	o Generate event on selected SET requests
- *
- * v4 - 18.04.02 - Jean II
- *	o Fix stupid off by one in iw_ioctl_description : IW_ESSID_MAX_SIZE + 1
- *
- * v5 - 21.06.02 - Jean II
- *	o Add IW_PRIV_TYPE_ADDR in priv_type_size (+cleanup)
- *	o Reshuffle IW_HEADER_TYPE_XXX to map IW_PRIV_TYPE_XXX changes
- *	o Add IWEVCUSTOM for driver specific event/scanning token
- *	o Turn on WE_STRICT_WRITE by default + kernel warning
- *	o Fix WE_STRICT_WRITE in ioctl_export_private() (32 => iw_num)
- *	o Fix off-by-one in test (extra_size <= IFNAMSIZ)
- *
- * v6 - 9.01.03 - Jean II
- *	o Add common spy support : iw_handler_set_spy(), wireless_spy_update()
- *	o Add enhanced spy support : iw_handler_set_thrspy() and event.
- *	o Add WIRELESS_EXT version display in /proc/net/wireless
- *
- * v6 - 18.06.04 - Jean II
- *	o Change get_spydata() method for added safety
- *	o Remove spy #ifdef, they are always on -> cleaner code
- *	o Allow any size GET request if user specifies length > max
- *		and if request has IW_DESCR_FLAG_NOMAX flag or is SIOCGIWPRIV
- *	o Start migrating get_wireless_stats to struct iw_handler_def
- *	o Add wmb() in iw_handler_set_spy() for non-coherent archs/cpus
- * Based on patch from Pavel Roskin <proski@gnu.org> :
- *	o Fix kernel data leak to user space in private handler handling
- *
- * v7 - 18.3.05 - Jean II
- *	o Remove (struct iw_point *)->pointer from events and streams
- *	o Remove spy_offset from struct iw_handler_def
- *	o Start deprecating dev->get_wireless_stats, output a warning
- *	o If IW_QUAL_DBM is set, show dBm values in /proc/net/wireless
- *	o Don't lose INVALID/DBM flags when clearing UPDATED flags (iwstats)
- *
- * v8 - 17.02.06 - Jean II
- *	o RtNetlink requests support (SET/GET)
- *
- * v8b - 03.08.06 - Herbert Xu
- *	o Fix Wireless Event locking issues.
- *
- * v9 - 14.3.06 - Jean II
- *	o Change length in ESSID and NICK to strlen() instead of strlen()+1
- *	o Make standard_ioctl_num and standard_event_num unsigned
- *	o Remove (struct net_device *)->get_wireless_stats()
- *
- * v10 - 16.3.07 - Jean II
- *	o Prevent leaking of kernel space in stream on 64 bits.
- */
-
-/***************************** INCLUDES *****************************/
-
-#include <linux/module.h>
-#include <linux/types.h>		/* off_t */
-#include <linux/netdevice.h>		/* struct ifreq, dev_get_by_name() */
-#include <linux/proc_fs.h>
-#include <linux/rtnetlink.h>		/* rtnetlink stuff */
-#include <linux/seq_file.h>
-#include <linux/init.h>			/* for __init */
-#include <linux/if_arp.h>		/* ARPHRD_ETHER */
-#include <linux/etherdevice.h>		/* compare_ether_addr */
-#include <linux/interrupt.h>
-#include <net/net_namespace.h>
-
-#include <linux/wireless.h>		/* Pretty obvious */
-#include <net/iw_handler.h>		/* New driver API */
-#include <net/netlink.h>
-#include <net/wext.h>
-
-#include <asm/uaccess.h>		/* copy_to_user() */
-
-/************************* GLOBAL VARIABLES *************************/
-/*
- * You should not use global variables, because of re-entrancy.
- * On our case, it's only const, so it's OK...
- */
-/*
- * Meta-data about all the standard Wireless Extension request we
- * know about.
- */
-static const struct iw_ioctl_description standard_ioctl[] = {
-	[SIOCSIWCOMMIT	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWNAME	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_CHAR,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWNWID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWNWID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWFREQ	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_FREQ,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWFREQ	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_FREQ,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWMODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_UINT,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWMODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_UINT,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWSENS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWSENS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRANGE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWRANGE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_range),
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWPRIV	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWPRIV	- SIOCIWFIRST] = { /* (handled directly by us) */
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_priv_args),
-		.max_tokens	= 16,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWSTATS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_NULL,
-	},
-	[SIOCGIWSTATS	- SIOCIWFIRST] = { /* (handled directly by us) */
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_statistics),
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr),
-		.max_tokens	= IW_MAX_SPY,
-	},
-	[SIOCGIWSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr) +
-				  sizeof(struct iw_quality),
-		.max_tokens	= IW_MAX_SPY,
-	},
-	[SIOCSIWTHRSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_thrspy),
-		.min_tokens	= 1,
-		.max_tokens	= 1,
-	},
-	[SIOCGIWTHRSPY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct iw_thrspy),
-		.min_tokens	= 1,
-		.max_tokens	= 1,
-	},
-	[SIOCSIWAP	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[SIOCGIWAP	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWMLME	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_mlme),
-		.max_tokens	= sizeof(struct iw_mlme),
-	},
-	[SIOCGIWAPLIST	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= sizeof(struct sockaddr) +
-				  sizeof(struct iw_quality),
-		.max_tokens	= IW_MAX_AP,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWSCAN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= 0,
-		.max_tokens	= sizeof(struct iw_scan_req),
-	},
-	[SIOCGIWSCAN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_SCAN_MAX_DATA,
-		.flags		= IW_DESCR_FLAG_NOMAX,
-	},
-	[SIOCSIWESSID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-		.flags		= IW_DESCR_FLAG_EVENT,
-	},
-	[SIOCGIWESSID	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-		.flags		= IW_DESCR_FLAG_DUMP,
-	},
-	[SIOCSIWNICKN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-	},
-	[SIOCGIWNICKN	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ESSID_MAX_SIZE,
-	},
-	[SIOCSIWRATE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRATE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRTS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRTS	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWFRAG	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWFRAG	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWTXPOW	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWTXPOW	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWRETRY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWRETRY	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWENCODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ENCODING_TOKEN_MAX,
-		.flags		= IW_DESCR_FLAG_EVENT | IW_DESCR_FLAG_RESTRICT,
-	},
-	[SIOCGIWENCODE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_ENCODING_TOKEN_MAX,
-		.flags		= IW_DESCR_FLAG_DUMP | IW_DESCR_FLAG_RESTRICT,
-	},
-	[SIOCSIWPOWER	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWPOWER	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWGENIE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[SIOCGIWGENIE	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[SIOCSIWAUTH	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCGIWAUTH	- SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_PARAM,
-	},
-	[SIOCSIWENCODEEXT - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_encode_ext),
-		.max_tokens	= sizeof(struct iw_encode_ext) +
-				  IW_ENCODING_TOKEN_MAX,
-	},
-	[SIOCGIWENCODEEXT - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_encode_ext),
-		.max_tokens	= sizeof(struct iw_encode_ext) +
-				  IW_ENCODING_TOKEN_MAX,
-	},
-	[SIOCSIWPMKSA - SIOCIWFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.min_tokens	= sizeof(struct iw_pmksa),
-		.max_tokens	= sizeof(struct iw_pmksa),
-	},
-};
-static const unsigned standard_ioctl_num = ARRAY_SIZE(standard_ioctl);
-
-/*
- * Meta-data about all the additional standard Wireless Extension events
- * we know about.
- */
-static const struct iw_ioctl_description standard_event[] = {
-	[IWEVTXDROP	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVQUAL	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_QUAL,
-	},
-	[IWEVCUSTOM	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_CUSTOM_MAX,
-	},
-	[IWEVREGISTERED	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVEXPIRED	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_ADDR,
-	},
-	[IWEVGENIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVMICHAELMICFAILURE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_michaelmicfailure),
-	},
-	[IWEVASSOCREQIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVASSOCRESPIE	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= IW_GENERIC_IE_MAX,
-	},
-	[IWEVPMKIDCAND	- IWEVFIRST] = {
-		.header_type	= IW_HEADER_TYPE_POINT,
-		.token_size	= 1,
-		.max_tokens	= sizeof(struct iw_pmkid_cand),
-	},
-};
-static const unsigned standard_event_num = ARRAY_SIZE(standard_event);
-
-/* Size (in bytes) of the various private data types */
-static const char iw_priv_type_size[] = {
-	0,				/* IW_PRIV_TYPE_NONE */
-	1,				/* IW_PRIV_TYPE_BYTE */
-	1,				/* IW_PRIV_TYPE_CHAR */
-	0,				/* Not defined */
-	sizeof(__u32),			/* IW_PRIV_TYPE_INT */
-	sizeof(struct iw_freq),		/* IW_PRIV_TYPE_FLOAT */
-	sizeof(struct sockaddr),	/* IW_PRIV_TYPE_ADDR */
-	0,				/* Not defined */
-};
-
-/* Size (in bytes) of various events */
-static const int event_type_size[] = {
-	IW_EV_LCP_LEN,			/* IW_HEADER_TYPE_NULL */
-	0,
-	IW_EV_CHAR_LEN,			/* IW_HEADER_TYPE_CHAR */
-	0,
-	IW_EV_UINT_LEN,			/* IW_HEADER_TYPE_UINT */
-	IW_EV_FREQ_LEN,			/* IW_HEADER_TYPE_FREQ */
-	IW_EV_ADDR_LEN,			/* IW_HEADER_TYPE_ADDR */
-	0,
-	IW_EV_POINT_LEN,		/* Without variable payload */
-	IW_EV_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
-	IW_EV_QUAL_LEN,			/* IW_HEADER_TYPE_QUAL */
-};
-
-#ifdef CONFIG_COMPAT
-static const int compat_event_type_size[] = {
-	IW_EV_COMPAT_LCP_LEN,		/* IW_HEADER_TYPE_NULL */
-	0,
-	IW_EV_COMPAT_CHAR_LEN,		/* IW_HEADER_TYPE_CHAR */
-	0,
-	IW_EV_COMPAT_UINT_LEN,		/* IW_HEADER_TYPE_UINT */
-	IW_EV_COMPAT_FREQ_LEN,		/* IW_HEADER_TYPE_FREQ */
-	IW_EV_COMPAT_ADDR_LEN,		/* IW_HEADER_TYPE_ADDR */
-	0,
-	IW_EV_COMPAT_POINT_LEN,		/* Without variable payload */
-	IW_EV_COMPAT_PARAM_LEN,		/* IW_HEADER_TYPE_PARAM */
-	IW_EV_COMPAT_QUAL_LEN,		/* IW_HEADER_TYPE_QUAL */
-};
-#endif
-
-/************************ COMMON SUBROUTINES ************************/
-/*
- * Stuff that may be used in various place or doesn't fit in one
- * of the section below.
- */
-
-/* ---------------------------------------------------------------- */
-/*
- * Return the driver handler associated with a specific Wireless Extension.
- */
-static iw_handler get_handler(struct net_device *dev, unsigned int cmd)
-{
-	/* Don't "optimise" the following variable, it will crash */
-	unsigned int	index;		/* *MUST* be unsigned */
-
-	/* Check if we have some wireless handlers defined */
-	if (dev->wireless_handlers == NULL)
-		return NULL;
-
-	/* Try as a standard command */
-	index = cmd - SIOCIWFIRST;
-	if (index < dev->wireless_handlers->num_standard)
-		return dev->wireless_handlers->standard[index];
-
-	/* Try as a private command */
-	index = cmd - SIOCIWFIRSTPRIV;
-	if (index < dev->wireless_handlers->num_private)
-		return dev->wireless_handlers->private[index];
-
-	/* Not found */
-	return NULL;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Get statistics out of the driver
- */
-struct iw_statistics *get_wireless_stats(struct net_device *dev)
-{
-	/* New location */
-	if ((dev->wireless_handlers != NULL) &&
-	   (dev->wireless_handlers->get_wireless_stats != NULL))
-		return dev->wireless_handlers->get_wireless_stats(dev);
-
-	/* Not found */
-	return NULL;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Call the commit handler in the driver
- * (if exist and if conditions are right)
- *
- * Note : our current commit strategy is currently pretty dumb,
- * but we will be able to improve on that...
- * The goal is to try to agreagate as many changes as possible
- * before doing the commit. Drivers that will define a commit handler
- * are usually those that need a reset after changing parameters, so
- * we want to minimise the number of reset.
- * A cool idea is to use a timer : at each "set" command, we re-set the
- * timer, when the timer eventually fires, we call the driver.
- * Hopefully, more on that later.
- *
- * Also, I'm waiting to see how many people will complain about the
- * netif_running(dev) test. I'm open on that one...
- * Hopefully, the driver will remember to do a commit in "open()" ;-)
- */
-static int call_commit_handler(struct net_device *dev)
-{
-	if ((netif_running(dev)) &&
-	   (dev->wireless_handlers->standard[0] != NULL))
-		/* Call the commit handler on the driver */
-		return dev->wireless_handlers->standard[0](dev, NULL,
-							   NULL, NULL);
-	else
-		return 0;		/* Command completed successfully */
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Calculate size of private arguments
- */
-static int get_priv_size(__u16 args)
-{
-	int	num = args & IW_PRIV_SIZE_MASK;
-	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
-
-	return num * iw_priv_type_size[type];
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Re-calculate the size of private arguments
- */
-static int adjust_priv_size(__u16 args, struct iw_point *iwp)
-{
-	int	num = iwp->length;
-	int	max = args & IW_PRIV_SIZE_MASK;
-	int	type = (args & IW_PRIV_TYPE_MASK) >> 12;
-
-	/* Make sure the driver doesn't goof up */
-	if (max < num)
-		num = max;
-
-	return num * iw_priv_type_size[type];
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Standard Wireless Handler : get wireless stats
- *	Allow programatic access to /proc/net/wireless even if /proc
- *	doesn't exist... Also more efficient...
- */
-static int iw_handler_get_iwstats(struct net_device *		dev,
-				  struct iw_request_info *	info,
-				  union iwreq_data *		wrqu,
-				  char *			extra)
-{
-	/* Get stats from the driver */
-	struct iw_statistics *stats;
-
-	stats = get_wireless_stats(dev);
-	if (stats) {
-		/* Copy statistics to extra */
-		memcpy(extra, stats, sizeof(struct iw_statistics));
-		wrqu->data.length = sizeof(struct iw_statistics);
-
-		/* Check if we need to clear the updated flag */
-		if (wrqu->data.flags != 0)
-			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
-		return 0;
-	} else
-		return -EOPNOTSUPP;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Standard Wireless Handler : get iwpriv definitions
- * Export the driver private handler definition
- * They will be picked up by tools like iwpriv...
- */
-static int iw_handler_get_private(struct net_device *		dev,
-				  struct iw_request_info *	info,
-				  union iwreq_data *		wrqu,
-				  char *			extra)
-{
-	/* Check if the driver has something to export */
-	if ((dev->wireless_handlers->num_private_args == 0) ||
-	   (dev->wireless_handlers->private_args == NULL))
-		return -EOPNOTSUPP;
-
-	/* Check if there is enough buffer up there */
-	if (wrqu->data.length < dev->wireless_handlers->num_private_args) {
-		/* User space can't know in advance how large the buffer
-		 * needs to be. Give it a hint, so that we can support
-		 * any size buffer we want somewhat efficiently... */
-		wrqu->data.length = dev->wireless_handlers->num_private_args;
-		return -E2BIG;
-	}
-
-	/* Set the number of available ioctls. */
-	wrqu->data.length = dev->wireless_handlers->num_private_args;
-
-	/* Copy structure to the user buffer. */
-	memcpy(extra, dev->wireless_handlers->private_args,
-	       sizeof(struct iw_priv_args) * wrqu->data.length);
-
-	return 0;
-}
-
-
-/******************** /proc/net/wireless SUPPORT ********************/
-/*
- * The /proc/net/wireless file is a human readable user-space interface
- * exporting various wireless specific statistics from the wireless devices.
- * This is the most popular part of the Wireless Extensions ;-)
- *
- * This interface is a pure clone of /proc/net/dev (in net/core/dev.c).
- * The content of the file is basically the content of "struct iw_statistics".
- */
-
-#ifdef CONFIG_PROC_FS
-
-/* ---------------------------------------------------------------- */
-/*
- * Print one entry (line) of /proc/net/wireless
- */
-static void wireless_seq_printf_stats(struct seq_file *seq,
-				      struct net_device *dev)
-{
-	/* Get stats from the driver */
-	struct iw_statistics *stats = get_wireless_stats(dev);
-	static struct iw_statistics nullstats = {};
-
-	/* show device if it's wireless regardless of current stats */
-	if (!stats && dev->wireless_handlers)
-		stats = &nullstats;
-
-	if (stats) {
-		seq_printf(seq, "%6s: %04x  %3d%c  %3d%c  %3d%c  %6d %6d %6d "
-				"%6d %6d   %6d\n",
-			   dev->name, stats->status, stats->qual.qual,
-			   stats->qual.updated & IW_QUAL_QUAL_UPDATED
-			   ? '.' : ' ',
-			   ((__s32) stats->qual.level) -
-			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
-			   stats->qual.updated & IW_QUAL_LEVEL_UPDATED
-			   ? '.' : ' ',
-			   ((__s32) stats->qual.noise) -
-			   ((stats->qual.updated & IW_QUAL_DBM) ? 0x100 : 0),
-			   stats->qual.updated & IW_QUAL_NOISE_UPDATED
-			   ? '.' : ' ',
-			   stats->discard.nwid, stats->discard.code,
-			   stats->discard.fragment, stats->discard.retries,
-			   stats->discard.misc, stats->miss.beacon);
-
-		if (stats != &nullstats)
-			stats->qual.updated &= ~IW_QUAL_ALL_UPDATED;
-	}
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Print info for /proc/net/wireless (print all entries)
- */
-static int wireless_dev_seq_show(struct seq_file *seq, void *v)
-{
-	might_sleep();
-
-	if (v == SEQ_START_TOKEN)
-		seq_printf(seq, "Inter-| sta-|   Quality        |   Discarded "
-				"packets               | Missed | WE\n"
-				" face | tus | link level noise |  nwid  "
-				"crypt   frag  retry   misc | beacon | %d\n",
-			   WIRELESS_EXT);
-	else
-		wireless_seq_printf_stats(seq, v);
-	return 0;
-}
-
-static void *wireless_dev_seq_start(struct seq_file *seq, loff_t *pos)
-{
-	struct net *net = seq_file_net(seq);
-	loff_t off;
-	struct net_device *dev;
-
-	rtnl_lock();
-	if (!*pos)
-		return SEQ_START_TOKEN;
-
-	off = 1;
-	for_each_netdev(net, dev)
-		if (off++ == *pos)
-			return dev;
-	return NULL;
-}
-
-static void *wireless_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos)
-{
-	struct net *net = seq_file_net(seq);
-
-	++*pos;
-
-	return v == SEQ_START_TOKEN ?
-		first_net_device(net) : next_net_device(v);
-}
-
-static void wireless_dev_seq_stop(struct seq_file *seq, void *v)
-{
-	rtnl_unlock();
-}
-
-static const struct seq_operations wireless_seq_ops = {
-	.start = wireless_dev_seq_start,
-	.next  = wireless_dev_seq_next,
-	.stop  = wireless_dev_seq_stop,
-	.show  = wireless_dev_seq_show,
-};
-
-static int seq_open_wireless(struct inode *inode, struct file *file)
-{
-	return seq_open_net(inode, file, &wireless_seq_ops,
-			    sizeof(struct seq_net_private));
-}
-
-static const struct file_operations wireless_seq_fops = {
-	.owner	 = THIS_MODULE,
-	.open    = seq_open_wireless,
-	.read    = seq_read,
-	.llseek  = seq_lseek,
-	.release = seq_release_net,
-};
-
-int wext_proc_init(struct net *net)
-{
-	/* Create /proc/net/wireless entry */
-	if (!proc_net_fops_create(net, "wireless", S_IRUGO, &wireless_seq_fops))
-		return -ENOMEM;
-
-	return 0;
-}
-
-void wext_proc_exit(struct net *net)
-{
-	proc_net_remove(net, "wireless");
-}
-#endif	/* CONFIG_PROC_FS */
-
-/************************** IOCTL SUPPORT **************************/
-/*
- * The original user space API to configure all those Wireless Extensions
- * is through IOCTLs.
- * In there, we check if we need to call the new driver API (iw_handler)
- * or just call the driver ioctl handler.
- */
-
-/* ---------------------------------------------------------------- */
-static int ioctl_standard_iw_point(struct iw_point *iwp, unsigned int cmd,
-				   const struct iw_ioctl_description *descr,
-				   iw_handler handler, struct net_device *dev,
-				   struct iw_request_info *info)
-{
-	int err, extra_size, user_length = 0, essid_compat = 0;
-	char *extra;
-
-	/* Calculate space needed by arguments. Always allocate
-	 * for max space.
-	 */
-	extra_size = descr->max_tokens * descr->token_size;
-
-	/* Check need for ESSID compatibility for WE < 21 */
-	switch (cmd) {
-	case SIOCSIWESSID:
-	case SIOCGIWESSID:
-	case SIOCSIWNICKN:
-	case SIOCGIWNICKN:
-		if (iwp->length == descr->max_tokens + 1)
-			essid_compat = 1;
-		else if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-			char essid[IW_ESSID_MAX_SIZE + 1];
-			unsigned int len;
-			len = iwp->length * descr->token_size;
-
-			if (len > IW_ESSID_MAX_SIZE)
-				return -EFAULT;
-
-			err = copy_from_user(essid, iwp->pointer, len);
-			if (err)
-				return -EFAULT;
-
-			if (essid[iwp->length - 1] == '\0')
-				essid_compat = 1;
-		}
-		break;
-	default:
-		break;
-	}
-
-	iwp->length -= essid_compat;
-
-	/* Check what user space is giving us */
-	if (IW_IS_SET(cmd)) {
-		/* Check NULL pointer */
-		if (!iwp->pointer && iwp->length != 0)
-			return -EFAULT;
-		/* Check if number of token fits within bounds */
-		if (iwp->length > descr->max_tokens)
-			return -E2BIG;
-		if (iwp->length < descr->min_tokens)
-			return -EINVAL;
-	} else {
-		/* Check NULL pointer */
-		if (!iwp->pointer)
-			return -EFAULT;
-		/* Save user space buffer size for checking */
-		user_length = iwp->length;
-
-		/* Don't check if user_length > max to allow forward
-		 * compatibility. The test user_length < min is
-		 * implied by the test at the end.
-		 */
-
-		/* Support for very large requests */
-		if ((descr->flags & IW_DESCR_FLAG_NOMAX) &&
-		    (user_length > descr->max_tokens)) {
-			/* Allow userspace to GET more than max so
-			 * we can support any size GET requests.
-			 * There is still a limit : -ENOMEM.
-			 */
-			extra_size = user_length * descr->token_size;
-
-			/* Note : user_length is originally a __u16,
-			 * and token_size is controlled by us,
-			 * so extra_size won't get negative and
-			 * won't overflow...
-			 */
-		}
-	}
-
-	/* kzalloc() ensures NULL-termination for essid_compat. */
-	extra = kzalloc(extra_size, GFP_KERNEL);
-	if (!extra)
-		return -ENOMEM;
-
-	/* If it is a SET, get all the extra data in here */
-	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-		if (copy_from_user(extra, iwp->pointer,
-				   iwp->length *
-				   descr->token_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-
-		if (cmd == SIOCSIWENCODEEXT) {
-			struct iw_encode_ext *ee = (void *) extra;
-
-			if (iwp->length < sizeof(*ee) + ee->key_len)
-				return -EFAULT;
-		}
-	}
-
-	err = handler(dev, info, (union iwreq_data *) iwp, extra);
-
-	iwp->length += essid_compat;
-
-	/* If we have something to return to the user */
-	if (!err && IW_IS_GET(cmd)) {
-		/* Check if there is enough buffer up there */
-		if (user_length < iwp->length) {
-			err = -E2BIG;
-			goto out;
-		}
-
-		if (copy_to_user(iwp->pointer, extra,
-				 iwp->length *
-				 descr->token_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-
-	/* Generate an event to notify listeners of the change */
-	if ((descr->flags & IW_DESCR_FLAG_EVENT) && err == -EIWCOMMIT) {
-		union iwreq_data *data = (union iwreq_data *) iwp;
-
-		if (descr->flags & IW_DESCR_FLAG_RESTRICT)
-			/* If the event is restricted, don't
-			 * export the payload.
-			 */
-			wireless_send_event(dev, cmd, data, NULL);
-		else
-			wireless_send_event(dev, cmd, data, extra);
-	}
-
-out:
-	kfree(extra);
-	return err;
-}
-
-/*
- * Wrapper to call a standard Wireless Extension handler.
- * We do various checks and also take care of moving data between
- * user space and kernel space.
- */
-static int ioctl_standard_call(struct net_device *	dev,
-			       struct iwreq		*iwr,
-			       unsigned int		cmd,
-			       struct iw_request_info	*info,
-			       iw_handler		handler)
-{
-	const struct iw_ioctl_description *	descr;
-	int					ret = -EINVAL;
-
-	/* Get the description of the IOCTL */
-	if ((cmd - SIOCIWFIRST) >= standard_ioctl_num)
-		return -EOPNOTSUPP;
-	descr = &(standard_ioctl[cmd - SIOCIWFIRST]);
-
-	/* Check if we have a pointer to user space data or not */
-	if (descr->header_type != IW_HEADER_TYPE_POINT) {
-
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), NULL);
-
-		/* Generate an event to notify listeners of the change */
-		if ((descr->flags & IW_DESCR_FLAG_EVENT) &&
-		   ((ret == 0) || (ret == -EIWCOMMIT)))
-			wireless_send_event(dev, cmd, &(iwr->u), NULL);
-	} else {
-		ret = ioctl_standard_iw_point(&iwr->u.data, cmd, descr,
-					      handler, dev, info);
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	/* Here, we will generate the appropriate event if needed */
-
-	return ret;
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Wrapper to call a private Wireless Extension handler.
- * We do various checks and also take care of moving data between
- * user space and kernel space.
- * It's not as nice and slimline as the standard wrapper. The cause
- * is struct iw_priv_args, which was not really designed for the
- * job we are going here.
- *
- * IMPORTANT : This function prevent to set and get data on the same
- * IOCTL and enforce the SET/GET convention. Not doing it would be
- * far too hairy...
- * If you need to set and get data at the same time, please don't use
- * a iw_handler but process it in your ioctl handler (i.e. use the
- * old driver API).
- */
-static int get_priv_descr_and_size(struct net_device *dev, unsigned int cmd,
-				   const struct iw_priv_args **descrp)
-{
-	const struct iw_priv_args *descr;
-	int i, extra_size;
-
-	descr = NULL;
-	for (i = 0; i < dev->wireless_handlers->num_private_args; i++) {
-		if (cmd == dev->wireless_handlers->private_args[i].cmd) {
-			descr = &dev->wireless_handlers->private_args[i];
-			break;
-		}
-	}
-
-	extra_size = 0;
-	if (descr) {
-		if (IW_IS_SET(cmd)) {
-			int	offset = 0;	/* For sub-ioctls */
-			/* Check for sub-ioctl handler */
-			if (descr->name[0] == '\0')
-				/* Reserve one int for sub-ioctl index */
-				offset = sizeof(__u32);
-
-			/* Size of set arguments */
-			extra_size = get_priv_size(descr->set_args);
-
-			/* Does it fits in iwr ? */
-			if ((descr->set_args & IW_PRIV_SIZE_FIXED) &&
-			   ((extra_size + offset) <= IFNAMSIZ))
-				extra_size = 0;
-		} else {
-			/* Size of get arguments */
-			extra_size = get_priv_size(descr->get_args);
-
-			/* Does it fits in iwr ? */
-			if ((descr->get_args & IW_PRIV_SIZE_FIXED) &&
-			   (extra_size <= IFNAMSIZ))
-				extra_size = 0;
-		}
-	}
-	*descrp = descr;
-	return extra_size;
-}
-
-static int ioctl_private_iw_point(struct iw_point *iwp, unsigned int cmd,
-				  const struct iw_priv_args *descr,
-				  iw_handler handler, struct net_device *dev,
-				  struct iw_request_info *info, int extra_size)
-{
-	char *extra;
-	int err;
-
-	/* Check what user space is giving us */
-	if (IW_IS_SET(cmd)) {
-		if (!iwp->pointer && iwp->length != 0)
-			return -EFAULT;
-
-		if (iwp->length > (descr->set_args & IW_PRIV_SIZE_MASK))
-			return -E2BIG;
-	} else if (!iwp->pointer)
-		return -EFAULT;
-
-	extra = kmalloc(extra_size, GFP_KERNEL);
-	if (!extra)
-		return -ENOMEM;
-
-	/* If it is a SET, get all the extra data in here */
-	if (IW_IS_SET(cmd) && (iwp->length != 0)) {
-		if (copy_from_user(extra, iwp->pointer, extra_size)) {
-			err = -EFAULT;
-			goto out;
-		}
-	}
-
-	/* Call the handler */
-	err = handler(dev, info, (union iwreq_data *) iwp, extra);
-
-	/* If we have something to return to the user */
-	if (!err && IW_IS_GET(cmd)) {
-		/* Adjust for the actual length if it's variable,
-		 * avoid leaking kernel bits outside.
-		 */
-		if (!(descr->get_args & IW_PRIV_SIZE_FIXED))
-			extra_size = adjust_priv_size(descr->get_args, iwp);
-
-		if (copy_to_user(iwp->pointer, extra, extra_size))
-			err =  -EFAULT;
-	}
-
-out:
-	kfree(extra);
-	return err;
-}
-
-static int ioctl_private_call(struct net_device *dev, struct iwreq *iwr,
-			      unsigned int cmd, struct iw_request_info *info,
-			      iw_handler handler)
-{
-	int extra_size = 0, ret = -EINVAL;
-	const struct iw_priv_args *descr;
-
-	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
-
-	/* Check if we have a pointer to user space data or not. */
-	if (extra_size == 0) {
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
-	} else {
-		ret = ioctl_private_iw_point(&iwr->u.data, cmd, descr,
-					     handler, dev, info, extra_size);
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	return ret;
-}
-
-/* ---------------------------------------------------------------- */
-typedef int (*wext_ioctl_func)(struct net_device *, struct iwreq *,
-			       unsigned int, struct iw_request_info *,
-			       iw_handler);
-
-/*
- * Main IOCTl dispatcher.
- * Check the type of IOCTL and call the appropriate wrapper...
- */
-static int wireless_process_ioctl(struct net *net, struct ifreq *ifr,
-				  unsigned int cmd,
-				  struct iw_request_info *info,
-				  wext_ioctl_func standard,
-				  wext_ioctl_func private)
-{
-	struct iwreq *iwr = (struct iwreq *) ifr;
-	struct net_device *dev;
-	iw_handler	handler;
-
-	/* Permissions are already checked in dev_ioctl() before calling us.
-	 * The copy_to/from_user() of ifr is also dealt with in there */
-
-	/* Make sure the device exist */
-	if ((dev = __dev_get_by_name(net, ifr->ifr_name)) == NULL)
-		return -ENODEV;
-
-	/* A bunch of special cases, then the generic case...
-	 * Note that 'cmd' is already filtered in dev_ioctl() with
-	 * (cmd >= SIOCIWFIRST && cmd <= SIOCIWLAST) */
-	if (cmd == SIOCGIWSTATS)
-		return standard(dev, iwr, cmd, info,
-				&iw_handler_get_iwstats);
-
-	if (cmd == SIOCGIWPRIV && dev->wireless_handlers)
-		return standard(dev, iwr, cmd, info,
-				&iw_handler_get_private);
-
-	/* Basic check */
-	if (!netif_device_present(dev))
-		return -ENODEV;
-
-	/* New driver API : try to find the handler */
-	handler = get_handler(dev, cmd);
-	if (handler) {
-		/* Standard and private are not the same */
-		if (cmd < SIOCIWFIRSTPRIV)
-			return standard(dev, iwr, cmd, info, handler);
-		else
-			return private(dev, iwr, cmd, info, handler);
-	}
-	/* Old driver API : call driver ioctl handler */
-	if (dev->netdev_ops->ndo_do_ioctl)
-		return dev->netdev_ops->ndo_do_ioctl(dev, ifr, cmd);
-	return -EOPNOTSUPP;
-}
-
-/* If command is `set a parameter', or `get the encoding parameters',
- * check if the user has the right to do it.
- */
-static int wext_permission_check(unsigned int cmd)
-{
-	if ((IW_IS_SET(cmd) || cmd == SIOCGIWENCODE || cmd == SIOCGIWENCODEEXT)
-	    && !capable(CAP_NET_ADMIN))
-		return -EPERM;
-
-	return 0;
-}
-
-/* entry point from dev ioctl */
-static int wext_ioctl_dispatch(struct net *net, struct ifreq *ifr,
-			       unsigned int cmd, struct iw_request_info *info,
-			       wext_ioctl_func standard,
-			       wext_ioctl_func private)
-{
-	int ret = wext_permission_check(cmd);
-
-	if (ret)
-		return ret;
-
-	dev_load(net, ifr->ifr_name);
-	rtnl_lock();
-	ret = wireless_process_ioctl(net, ifr, cmd, info, standard, private);
-	rtnl_unlock();
-
-	return ret;
-}
-
-int wext_handle_ioctl(struct net *net, struct ifreq *ifr, unsigned int cmd,
-		      void __user *arg)
-{
-	struct iw_request_info info = { .cmd = cmd, .flags = 0 };
-	int ret;
-
-	ret = wext_ioctl_dispatch(net, ifr, cmd, &info,
-				  ioctl_standard_call,
-				  ioctl_private_call);
-	if (ret >= 0 &&
-	    IW_IS_GET(cmd) &&
-	    copy_to_user(arg, ifr, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	return ret;
-}
-
-#ifdef CONFIG_COMPAT
-static int compat_standard_call(struct net_device	*dev,
-				struct iwreq		*iwr,
-				unsigned int		cmd,
-				struct iw_request_info	*info,
-				iw_handler		handler)
-{
-	const struct iw_ioctl_description *descr;
-	struct compat_iw_point *iwp_compat;
-	struct iw_point iwp;
-	int err;
-
-	descr = standard_ioctl + (cmd - SIOCIWFIRST);
-
-	if (descr->header_type != IW_HEADER_TYPE_POINT)
-		return ioctl_standard_call(dev, iwr, cmd, info, handler);
-
-	iwp_compat = (struct compat_iw_point *) &iwr->u.data;
-	iwp.pointer = compat_ptr(iwp_compat->pointer);
-	iwp.length = iwp_compat->length;
-	iwp.flags = iwp_compat->flags;
-
-	err = ioctl_standard_iw_point(&iwp, cmd, descr, handler, dev, info);
-
-	iwp_compat->pointer = ptr_to_compat(iwp.pointer);
-	iwp_compat->length = iwp.length;
-	iwp_compat->flags = iwp.flags;
-
-	return err;
-}
-
-static int compat_private_call(struct net_device *dev, struct iwreq *iwr,
-			       unsigned int cmd, struct iw_request_info *info,
-			       iw_handler handler)
-{
-	const struct iw_priv_args *descr;
-	int ret, extra_size;
-
-	extra_size = get_priv_descr_and_size(dev, cmd, &descr);
-
-	/* Check if we have a pointer to user space data or not. */
-	if (extra_size == 0) {
-		/* No extra arguments. Trivial to handle */
-		ret = handler(dev, info, &(iwr->u), (char *) &(iwr->u));
-	} else {
-		struct compat_iw_point *iwp_compat;
-		struct iw_point iwp;
-
-		iwp_compat = (struct compat_iw_point *) &iwr->u.data;
-		iwp.pointer = compat_ptr(iwp_compat->pointer);
-		iwp.length = iwp_compat->length;
-		iwp.flags = iwp_compat->flags;
-
-		ret = ioctl_private_iw_point(&iwp, cmd, descr,
-					     handler, dev, info, extra_size);
-
-		iwp_compat->pointer = ptr_to_compat(iwp.pointer);
-		iwp_compat->length = iwp.length;
-		iwp_compat->flags = iwp.flags;
-	}
-
-	/* Call commit handler if needed and defined */
-	if (ret == -EIWCOMMIT)
-		ret = call_commit_handler(dev);
-
-	return ret;
-}
-
-int compat_wext_handle_ioctl(struct net *net, unsigned int cmd,
-			     unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	struct iw_request_info info;
-	struct iwreq iwr;
-	char *colon;
-	int ret;
-
-	if (copy_from_user(&iwr, argp, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	iwr.ifr_name[IFNAMSIZ-1] = 0;
-	colon = strchr(iwr.ifr_name, ':');
-	if (colon)
-		*colon = 0;
-
-	info.cmd = cmd;
-	info.flags = IW_REQUEST_FLAG_COMPAT;
-
-	ret = wext_ioctl_dispatch(net, (struct ifreq *) &iwr, cmd, &info,
-				  compat_standard_call,
-				  compat_private_call);
-
-	if (ret >= 0 &&
-	    IW_IS_GET(cmd) &&
-	    copy_to_user(argp, &iwr, sizeof(struct iwreq)))
-		return -EFAULT;
-
-	return ret;
-}
-#endif
-
-static int __net_init wext_pernet_init(struct net *net)
-{
-	skb_queue_head_init(&net->wext_nlevents);
-	return 0;
-}
-
-static void __net_exit wext_pernet_exit(struct net *net)
-{
-	skb_queue_purge(&net->wext_nlevents);
-}
-
-static struct pernet_operations wext_pernet_ops = {
-	.init = wext_pernet_init,
-	.exit = wext_pernet_exit,
-};
-
-static int __init wireless_nlevent_init(void)
-{
-	return register_pernet_subsys(&wext_pernet_ops);
-}
-
-subsys_initcall(wireless_nlevent_init);
-
-/* Process events generated by the wireless layer or the driver. */
-static void wireless_nlevent_process(struct work_struct *work)
-{
-	struct sk_buff *skb;
-	struct net *net;
-
-	rtnl_lock();
-
-	for_each_net(net) {
-		while ((skb = skb_dequeue(&net->wext_nlevents)))
-			rtnl_notify(skb, net, 0, RTNLGRP_LINK, NULL,
-				    GFP_KERNEL);
-	}
-
-	rtnl_unlock();
-}
-
-static DECLARE_WORK(wireless_nlevent_work, wireless_nlevent_process);
-
-static struct nlmsghdr *rtnetlink_ifinfo_prep(struct net_device *dev,
-					      struct sk_buff *skb)
-{
-	struct ifinfomsg *r;
-	struct nlmsghdr  *nlh;
-
-	nlh = nlmsg_put(skb, 0, 0, RTM_NEWLINK, sizeof(*r), 0);
-	if (!nlh)
-		return NULL;
-
-	r = nlmsg_data(nlh);
-	r->ifi_family = AF_UNSPEC;
-	r->__ifi_pad = 0;
-	r->ifi_type = dev->type;
-	r->ifi_index = dev->ifindex;
-	r->ifi_flags = dev_get_flags(dev);
-	r->ifi_change = 0;	/* Wireless changes don't affect those flags */
-
-	NLA_PUT_STRING(skb, IFLA_IFNAME, dev->name);
-
-	return nlh;
- nla_put_failure:
-	nlmsg_cancel(skb, nlh);
-	return NULL;
-}
-
-
-/*
- * Main event dispatcher. Called from other parts and drivers.
- * Send the event on the appropriate channels.
- * May be called from interrupt context.
- */
-void wireless_send_event(struct net_device *	dev,
-			 unsigned int		cmd,
-			 union iwreq_data *	wrqu,
-			 const char *		extra)
-{
-	const struct iw_ioctl_description *	descr = NULL;
-	int extra_len = 0;
-	struct iw_event  *event;		/* Mallocated whole event */
-	int event_len;				/* Its size */
-	int hdr_len;				/* Size of the event header */
-	int wrqu_off = 0;			/* Offset in wrqu */
-	/* Don't "optimise" the following variable, it will crash */
-	unsigned	cmd_index;		/* *MUST* be unsigned */
-	struct sk_buff *skb;
-	struct nlmsghdr *nlh;
-	struct nlattr *nla;
-#ifdef CONFIG_COMPAT
-	struct __compat_iw_event *compat_event;
-	struct compat_iw_point compat_wrqu;
-	struct sk_buff *compskb;
-#endif
-
-	/*
-	 * Nothing in the kernel sends scan events with data, be safe.
-	 * This is necessary because we cannot fix up scan event data
-	 * for compat, due to being contained in 'extra', but normally
-	 * applications are required to retrieve the scan data anyway
-	 * and no data is included in the event, this codifies that
-	 * practice.
-	 */
-	if (WARN_ON(cmd == SIOCGIWSCAN && extra))
-		extra = NULL;
-
-	/* Get the description of the Event */
-	if (cmd <= SIOCIWLAST) {
-		cmd_index = cmd - SIOCIWFIRST;
-		if (cmd_index < standard_ioctl_num)
-			descr = &(standard_ioctl[cmd_index]);
-	} else {
-		cmd_index = cmd - IWEVFIRST;
-		if (cmd_index < standard_event_num)
-			descr = &(standard_event[cmd_index]);
-	}
-	/* Don't accept unknown events */
-	if (descr == NULL) {
-		/* Note : we don't return an error to the driver, because
-		 * the driver would not know what to do about it. It can't
-		 * return an error to the user, because the event is not
-		 * initiated by a user request.
-		 * The best the driver could do is to log an error message.
-		 * We will do it ourselves instead...
-		 */
-		printk(KERN_ERR "%s (WE) : Invalid/Unknown Wireless Event (0x%04X)\n",
-		       dev->name, cmd);
-		return;
-	}
-
-	/* Check extra parameters and set extra_len */
-	if (descr->header_type == IW_HEADER_TYPE_POINT) {
-		/* Check if number of token fits within bounds */
-		if (wrqu->data.length > descr->max_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too big (%d)\n", dev->name, wrqu->data.length);
-			return;
-		}
-		if (wrqu->data.length < descr->min_tokens) {
-			printk(KERN_ERR "%s (WE) : Wireless Event too small (%d)\n", dev->name, wrqu->data.length);
-			return;
-		}
-		/* Calculate extra_len - extra is NULL for restricted events */
-		if (extra != NULL)
-			extra_len = wrqu->data.length * descr->token_size;
-		/* Always at an offset in wrqu */
-		wrqu_off = IW_EV_POINT_OFF;
-	}
-
-	/* Total length of the event */
-	hdr_len = event_type_size[descr->header_type];
-	event_len = hdr_len + extra_len;
-
-	/*
-	 * The problem for 64/32 bit.
-	 *
-	 * On 64-bit, a regular event is laid out as follows:
-	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
-	 *      | event.len | event.cmd |     p a d d i n g     |
-	 *      | wrqu data ... (with the correct size)         |
-	 *
-	 * This padding exists because we manipulate event->u,
-	 * and 'event' is not packed.
-	 *
-	 * An iw_point event is laid out like this instead:
-	 *      |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
-	 *      | event.len | event.cmd |     p a d d i n g     |
-	 *      | iwpnt.len | iwpnt.flg |     p a d d i n g     |
-	 *      | extra data  ...
-	 *
-	 * The second padding exists because struct iw_point is extended,
-	 * but this depends on the platform...
-	 *
-	 * On 32-bit, all the padding shouldn't be there.
-	 */
-
-	skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
-	if (!skb)
-		return;
-
-	/* Send via the RtNetlink event channel */
-	nlh = rtnetlink_ifinfo_prep(dev, skb);
-	if (WARN_ON(!nlh)) {
-		kfree_skb(skb);
-		return;
-	}
-
-	/* Add the wireless events in the netlink packet */
-	nla = nla_reserve(skb, IFLA_WIRELESS, event_len);
-	if (!nla) {
-		kfree_skb(skb);
-		return;
-	}
-	event = nla_data(nla);
-
-	/* Fill event - first clear to avoid data leaking */
-	memset(event, 0, hdr_len);
-	event->len = event_len;
-	event->cmd = cmd;
-	memcpy(&event->u, ((char *) wrqu) + wrqu_off, hdr_len - IW_EV_LCP_LEN);
-	if (extra_len)
-		memcpy(((char *) event) + hdr_len, extra, extra_len);
-
-	nlmsg_end(skb, nlh);
-#ifdef CONFIG_COMPAT
-	hdr_len = compat_event_type_size[descr->header_type];
-	event_len = hdr_len + extra_len;
-
-	compskb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC);
-	if (!compskb) {
-		kfree_skb(skb);
-		return;
-	}
-
-	/* Send via the RtNetlink event channel */
-	nlh = rtnetlink_ifinfo_prep(dev, compskb);
-	if (WARN_ON(!nlh)) {
-		kfree_skb(skb);
-		kfree_skb(compskb);
-		return;
-	}
-
-	/* Add the wireless events in the netlink packet */
-	nla = nla_reserve(compskb, IFLA_WIRELESS, event_len);
-	if (!nla) {
-		kfree_skb(skb);
-		kfree_skb(compskb);
-		return;
-	}
-	compat_event = nla_data(nla);
-
-	compat_event->len = event_len;
-	compat_event->cmd = cmd;
-	if (descr->header_type == IW_HEADER_TYPE_POINT) {
-		compat_wrqu.length = wrqu->data.length;
-		compat_wrqu.flags = wrqu->data.flags;
-		memcpy(&compat_event->pointer,
-			((char *) &compat_wrqu) + IW_EV_COMPAT_POINT_OFF,
-			hdr_len - IW_EV_COMPAT_LCP_LEN);
-		if (extra_len)
-			memcpy(((char *) compat_event) + hdr_len,
-				extra, extra_len);
-	} else {
-		/* extra_len must be zero, so no if (extra) needed */
-		memcpy(&compat_event->pointer, wrqu,
-			hdr_len - IW_EV_COMPAT_LCP_LEN);
-	}
-
-	nlmsg_end(compskb, nlh);
-
-	skb_shinfo(skb)->frag_list = compskb;
-#endif
-	skb_queue_tail(&dev_net(dev)->wext_nlevents, skb);
-	schedule_work(&wireless_nlevent_work);
-}
-EXPORT_SYMBOL(wireless_send_event);
-
-/********************** ENHANCED IWSPY SUPPORT **********************/
-/*
- * In the old days, the driver was handling spy support all by itself.
- * Now, the driver can delegate this task to Wireless Extensions.
- * It needs to use those standard spy iw_handler in struct iw_handler_def,
- * push data to us via wireless_spy_update() and include struct iw_spy_data
- * in its private part (and export it in net_device->wireless_data->spy_data).
- * One of the main advantage of centralising spy support here is that
- * it becomes much easier to improve and extend it without having to touch
- * the drivers. One example is the addition of the Spy-Threshold events.
- */
-
-/* ---------------------------------------------------------------- */
-/*
- * Return the pointer to the spy data in the driver.
- * Because this is called on the Rx path via wireless_spy_update(),
- * we want it to be efficient...
- */
-static inline struct iw_spy_data *get_spydata(struct net_device *dev)
-{
-	/* This is the new way */
-	if (dev->wireless_data)
-		return dev->wireless_data->spy_data;
-	return NULL;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : set Spy List
- */
-int iw_handler_set_spy(struct net_device *	dev,
-		       struct iw_request_info *	info,
-		       union iwreq_data *	wrqu,
-		       char *			extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct sockaddr *	address = (struct sockaddr *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Disable spy collection while we copy the addresses.
-	 * While we copy addresses, any call to wireless_spy_update()
-	 * will NOP. This is OK, as anyway the addresses are changing. */
-	spydata->spy_number = 0;
-
-	/* We want to operate without locking, because wireless_spy_update()
-	 * most likely will happen in the interrupt handler, and therefore
-	 * have its own locking constraints and needs performance.
-	 * The rtnl_lock() make sure we don't race with the other iw_handlers.
-	 * This make sure wireless_spy_update() "see" that the spy list
-	 * is temporarily disabled. */
-	smp_wmb();
-
-	/* Are there are addresses to copy? */
-	if (wrqu->data.length > 0) {
-		int i;
-
-		/* Copy addresses */
-		for (i = 0; i < wrqu->data.length; i++)
-			memcpy(spydata->spy_address[i], address[i].sa_data,
-			       ETH_ALEN);
-		/* Reset stats */
-		memset(spydata->spy_stat, 0,
-		       sizeof(struct iw_quality) * IW_MAX_SPY);
-	}
-
-	/* Make sure above is updated before re-enabling */
-	smp_wmb();
-
-	/* Enable addresses */
-	spydata->spy_number = wrqu->data.length;
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_set_spy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : get Spy List
- */
-int iw_handler_get_spy(struct net_device *	dev,
-		       struct iw_request_info *	info,
-		       union iwreq_data *	wrqu,
-		       char *			extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct sockaddr *	address = (struct sockaddr *) extra;
-	int			i;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	wrqu->data.length = spydata->spy_number;
-
-	/* Copy addresses. */
-	for (i = 0; i < spydata->spy_number; i++) 	{
-		memcpy(address[i].sa_data, spydata->spy_address[i], ETH_ALEN);
-		address[i].sa_family = AF_UNIX;
-	}
-	/* Copy stats to the user buffer (just after). */
-	if (spydata->spy_number > 0)
-		memcpy(extra  + (sizeof(struct sockaddr) *spydata->spy_number),
-		       spydata->spy_stat,
-		       sizeof(struct iw_quality) * spydata->spy_number);
-	/* Reset updated flags. */
-	for (i = 0; i < spydata->spy_number; i++)
-		spydata->spy_stat[i].updated &= ~IW_QUAL_ALL_UPDATED;
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_get_spy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : set spy threshold
- */
-int iw_handler_set_thrspy(struct net_device *	dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *	wrqu,
-			  char *		extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Just do it */
-	memcpy(&(spydata->spy_thr_low), &(threshold->low),
-	       2 * sizeof(struct iw_quality));
-
-	/* Clear flag */
-	memset(spydata->spy_thr_under, '\0', sizeof(spydata->spy_thr_under));
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_set_thrspy);
-
-/*------------------------------------------------------------------*/
-/*
- * Standard Wireless Handler : get spy threshold
- */
-int iw_handler_get_thrspy(struct net_device *	dev,
-			  struct iw_request_info *info,
-			  union iwreq_data *	wrqu,
-			  char *		extra)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	struct iw_thrspy *	threshold = (struct iw_thrspy *) extra;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return -EOPNOTSUPP;
-
-	/* Just do it */
-	memcpy(&(threshold->low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
-
-	return 0;
-}
-EXPORT_SYMBOL(iw_handler_get_thrspy);
-
-/*------------------------------------------------------------------*/
-/*
- * Prepare and send a Spy Threshold event
- */
-static void iw_send_thrspy_event(struct net_device *	dev,
-				 struct iw_spy_data *	spydata,
-				 unsigned char *	address,
-				 struct iw_quality *	wstats)
-{
-	union iwreq_data	wrqu;
-	struct iw_thrspy	threshold;
-
-	/* Init */
-	wrqu.data.length = 1;
-	wrqu.data.flags = 0;
-	/* Copy address */
-	memcpy(threshold.addr.sa_data, address, ETH_ALEN);
-	threshold.addr.sa_family = ARPHRD_ETHER;
-	/* Copy stats */
-	memcpy(&(threshold.qual), wstats, sizeof(struct iw_quality));
-	/* Copy also thresholds */
-	memcpy(&(threshold.low), &(spydata->spy_thr_low),
-	       2 * sizeof(struct iw_quality));
-
-	/* Send event to user space */
-	wireless_send_event(dev, SIOCGIWTHRSPY, &wrqu, (char *) &threshold);
-}
-
-/* ---------------------------------------------------------------- */
-/*
- * Call for the driver to update the spy data.
- * For now, the spy data is a simple array. As the size of the array is
- * small, this is good enough. If we wanted to support larger number of
- * spy addresses, we should use something more efficient...
- */
-void wireless_spy_update(struct net_device *	dev,
-			 unsigned char *	address,
-			 struct iw_quality *	wstats)
-{
-	struct iw_spy_data *	spydata = get_spydata(dev);
-	int			i;
-	int			match = -1;
-
-	/* Make sure driver is not buggy or using the old API */
-	if (!spydata)
-		return;
-
-	/* Update all records that match */
-	for (i = 0; i < spydata->spy_number; i++)
-		if (!compare_ether_addr(address, spydata->spy_address[i])) {
-			memcpy(&(spydata->spy_stat[i]), wstats,
-			       sizeof(struct iw_quality));
-			match = i;
-		}
-
-	/* Generate an event if we cross the spy threshold.
-	 * To avoid event storms, we have a simple hysteresis : we generate
-	 * event only when we go under the low threshold or above the
-	 * high threshold. */
-	if (match >= 0) {
-		if (spydata->spy_thr_under[match]) {
-			if (wstats->level > spydata->spy_thr_high.level) {
-				spydata->spy_thr_under[match] = 0;
-				iw_send_thrspy_event(dev, spydata,
-						     address, wstats);
-			}
-		} else {
-			if (wstats->level < spydata->spy_thr_low.level) {
-				spydata->spy_thr_under[match] = 1;
-				iw_send_thrspy_event(dev, spydata,
-						     address, wstats);
-			}
-		}
-	}
-}
-EXPORT_SYMBOL(wireless_spy_update);
diff --git a/net/x25/af_x25.c b/net/x25/af_x25.c
index 7fa9c7a..38e235f 100644
--- a/net/x25/af_x25.c
+++ b/net/x25/af_x25.c
@@ -501,7 +501,8 @@
 	return sk;
 }
 
-static int x25_create(struct net *net, struct socket *sock, int protocol)
+static int x25_create(struct net *net, struct socket *sock, int protocol,
+		      int kern)
 {
 	struct sock *sk;
 	struct x25_sock *x25;
@@ -1363,7 +1364,7 @@
 			    facilities.throughput > 0xDD)
 				break;
 			if (facilities.reverse &&
-				(facilities.reverse | 0x81)!= 0x81)
+				(facilities.reverse & 0x81) != 0x81)
 				break;
 			x25->facilities = facilities;
 			rc = 0;
@@ -1476,7 +1477,7 @@
 	return rc;
 }
 
-static struct net_proto_family x25_family_ops = {
+static const struct net_proto_family x25_family_ops = {
 	.family =	AF_X25,
 	.create =	x25_create,
 	.owner	=	THIS_MODULE,
diff --git a/net/x25/x25_in.c b/net/x25/x25_in.c
index 7d7c3ab..96d9227 100644
--- a/net/x25/x25_in.c
+++ b/net/x25/x25_in.c
@@ -114,7 +114,7 @@
 			/*
 			 *	Copy any Call User Data.
 			 */
-			if (skb->len >= 0) {
+			if (skb->len > 0) {
 				skb_copy_from_linear_data(skb,
 					      x25->calluserdata.cuddata,
 					      skb->len);
diff --git a/net/x25/x25_route.c b/net/x25/x25_route.c
index 2c999cc..66961ea 100644
--- a/net/x25/x25_route.c
+++ b/net/x25/x25_route.c
@@ -190,7 +190,7 @@
 		goto out;
 
 	rc = -EINVAL;
-	if (rt.sigdigits < 0 || rt.sigdigits > 15)
+	if (rt.sigdigits > 15)
 		goto out;
 
 	dev = x25_dev_get(rt.device);
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index faf54c6..b393410 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -689,84 +689,6 @@
 }
 EXPORT_SYMBOL_GPL(xfrm_count_enc_supported);
 
-/* Move to common area: it is shared with AH. */
-
-int skb_icv_walk(const struct sk_buff *skb, struct hash_desc *desc,
-		 int offset, int len, icv_update_fn_t icv_update)
-{
-	int start = skb_headlen(skb);
-	int i, copy = start - offset;
-	struct sk_buff *frag_iter;
-	struct scatterlist sg;
-	int err;
-
-	/* Checksum header. */
-	if (copy > 0) {
-		if (copy > len)
-			copy = len;
-
-		sg_init_one(&sg, skb->data + offset, copy);
-
-		err = icv_update(desc, &sg, copy);
-		if (unlikely(err))
-			return err;
-
-		if ((len -= copy) == 0)
-			return 0;
-		offset += copy;
-	}
-
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-		int end;
-
-		WARN_ON(start > offset + len);
-
-		end = start + skb_shinfo(skb)->frags[i].size;
-		if ((copy = end - offset) > 0) {
-			skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-
-			if (copy > len)
-				copy = len;
-
-			sg_init_table(&sg, 1);
-			sg_set_page(&sg, frag->page, copy,
-				    frag->page_offset + offset-start);
-
-			err = icv_update(desc, &sg, copy);
-			if (unlikely(err))
-				return err;
-
-			if (!(len -= copy))
-				return 0;
-			offset += copy;
-		}
-		start = end;
-	}
-
-	skb_walk_frags(skb, frag_iter) {
-		int end;
-
-		WARN_ON(start > offset + len);
-
-		end = start + frag_iter->len;
-		if ((copy = end - offset) > 0) {
-			if (copy > len)
-				copy = len;
-			err = skb_icv_walk(frag_iter, desc, offset-start,
-					   copy, icv_update);
-			if (unlikely(err))
-				return err;
-			if ((len -= copy) == 0)
-				return 0;
-			offset += copy;
-		}
-		start = end;
-	}
-	BUG_ON(len);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(skb_icv_walk);
-
 #if defined(CONFIG_INET_ESP) || defined(CONFIG_INET_ESP_MODULE) || defined(CONFIG_INET6_ESP) || defined(CONFIG_INET6_ESP_MODULE)
 
 void *pskb_put(struct sk_buff *skb, struct sk_buff *tail, int len)
diff --git a/samples/tracepoints/tracepoint-sample.c b/samples/tracepoints/tracepoint-sample.c
index 9cf80a1..26fab33 100644
--- a/samples/tracepoints/tracepoint-sample.c
+++ b/samples/tracepoints/tracepoint-sample.c
@@ -28,7 +28,7 @@
 	return -EPERM;
 }
 
-static struct file_operations mark_ops = {
+static const struct file_operations mark_ops = {
 	.open = my_open,
 };
 
diff --git a/security/integrity/ima/ima_fs.c b/security/integrity/ima/ima_fs.c
index 8e9777b..0c72c9c 100644
--- a/security/integrity/ima/ima_fs.c
+++ b/security/integrity/ima/ima_fs.c
@@ -43,7 +43,7 @@
 	return ima_show_htable_value(buf, count, ppos, &ima_htable.violations);
 }
 
-static struct file_operations ima_htable_violations_ops = {
+static const struct file_operations ima_htable_violations_ops = {
 	.read = ima_show_htable_violations
 };
 
@@ -55,7 +55,7 @@
 
 }
 
-static struct file_operations ima_measurements_count_ops = {
+static const struct file_operations ima_measurements_count_ops = {
 	.read = ima_show_measurements_count
 };
 
@@ -158,7 +158,7 @@
 	return seq_open(file, &ima_measurments_seqops);
 }
 
-static struct file_operations ima_measurements_ops = {
+static const struct file_operations ima_measurements_ops = {
 	.open = ima_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -233,7 +233,7 @@
 	return seq_open(file, &ima_ascii_measurements_seqops);
 }
 
-static struct file_operations ima_ascii_measurements_ops = {
+static const struct file_operations ima_ascii_measurements_ops = {
 	.open = ima_ascii_measurements_open,
 	.read = seq_read,
 	.llseek = seq_lseek,
@@ -313,7 +313,7 @@
 	return 0;
 }
 
-static struct file_operations ima_measure_policy_ops = {
+static const struct file_operations ima_measure_policy_ops = {
 	.open = ima_open_policy,
 	.write = ima_write_policy,
 	.release = ima_release_policy
diff --git a/security/lsm_audit.c b/security/lsm_audit.c
index 3bb90b6..e04566a 100644
--- a/security/lsm_audit.c
+++ b/security/lsm_audit.c
@@ -273,11 +273,11 @@
 			case AF_INET: {
 				struct inet_sock *inet = inet_sk(sk);
 
-				print_ipv4_addr(ab, inet->rcv_saddr,
-						inet->sport,
+				print_ipv4_addr(ab, inet->inet_rcv_saddr,
+						inet->inet_sport,
 						"laddr", "lport");
-				print_ipv4_addr(ab, inet->daddr,
-						inet->dport,
+				print_ipv4_addr(ab, inet->inet_daddr,
+						inet->inet_dport,
 						"faddr", "fport");
 				break;
 			}
@@ -286,10 +286,10 @@
 				struct ipv6_pinfo *inet6 = inet6_sk(sk);
 
 				print_ipv6_addr(ab, &inet6->rcv_saddr,
-						inet->sport,
+						inet->inet_sport,
 						"laddr", "lport");
 				print_ipv6_addr(ab, &inet6->daddr,
-						inet->dport,
+						inet->inet_dport,
 						"faddr", "fport");
 				break;
 			}
diff --git a/sound/aoa/codecs/tas.c b/sound/aoa/codecs/tas.c
index f0ebc971..1dd66dd 100644
--- a/sound/aoa/codecs/tas.c
+++ b/sound/aoa/codecs/tas.c
@@ -897,6 +897,15 @@
 	client = i2c_new_device(adapter, &info);
 	if (!client)
 		return -ENODEV;
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, and then there
+	 * is no point in keeping the device instantiated.
+	 */
+	if (!client->driver) {
+		i2c_unregister_device(client);
+		return -ENODEV;
+	}
 
 	/*
 	 * Let i2c-core delete that device on driver removal.
diff --git a/sound/arm/pxa2xx-ac97.c b/sound/arm/pxa2xx-ac97.c
index 4e34d19..b4b48af 100644
--- a/sound/arm/pxa2xx-ac97.c
+++ b/sound/arm/pxa2xx-ac97.c
@@ -137,9 +137,9 @@
 	return 0;
 }
 
-static int pxa2xx_ac97_suspend(struct platform_device *dev, pm_message_t state)
+static int pxa2xx_ac97_suspend(struct device *dev)
 {
-	struct snd_card *card = platform_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (card)
@@ -148,9 +148,9 @@
 	return ret;
 }
 
-static int pxa2xx_ac97_resume(struct platform_device *dev)
+static int pxa2xx_ac97_resume(struct device *dev)
 {
-	struct snd_card *card = platform_get_drvdata(dev);
+	struct snd_card *card = dev_get_drvdata(dev);
 	int ret = 0;
 
 	if (card)
@@ -159,9 +159,10 @@
 	return ret;
 }
 
-#else
-#define pxa2xx_ac97_suspend	NULL
-#define pxa2xx_ac97_resume	NULL
+static struct dev_pm_ops pxa2xx_ac97_pm_ops = {
+	.suspend	= pxa2xx_ac97_suspend,
+	.resume		= pxa2xx_ac97_resume,
+};
 #endif
 
 static int __devinit pxa2xx_ac97_probe(struct platform_device *dev)
@@ -241,11 +242,12 @@
 static struct platform_driver pxa2xx_ac97_driver = {
 	.probe		= pxa2xx_ac97_probe,
 	.remove		= __devexit_p(pxa2xx_ac97_remove),
-	.suspend	= pxa2xx_ac97_suspend,
-	.resume		= pxa2xx_ac97_resume,
 	.driver		= {
 		.name	= "pxa2xx-ac97",
 		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pxa2xx_ac97_pm_ops,
+#endif
 	},
 };
 
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index 561d6d9..ab73edf 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -2985,7 +2985,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_status =
+static const struct vm_operations_struct snd_pcm_vm_ops_status =
 {
 	.fault =	snd_pcm_mmap_status_fault,
 };
@@ -3024,7 +3024,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_control =
+static const struct vm_operations_struct snd_pcm_vm_ops_control =
 {
 	.fault =	snd_pcm_mmap_control_fault,
 };
@@ -3094,7 +3094,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct snd_pcm_vm_ops_data =
+static const struct vm_operations_struct snd_pcm_vm_ops_data =
 {
 	.open =		snd_pcm_mmap_data_open,
 	.close =	snd_pcm_mmap_data_close,
@@ -3118,7 +3118,7 @@
  * mmap the DMA buffer on I/O memory area
  */
 #if SNDRV_PCM_INFO_MMAP_IOMEM
-static struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
+static const struct vm_operations_struct snd_pcm_vm_ops_data_mmio =
 {
 	.open =		snd_pcm_mmap_data_open,
 	.close =	snd_pcm_mmap_data_close,
diff --git a/sound/mips/hal2.c b/sound/mips/hal2.c
index c52691c..9a88cdf 100644
--- a/sound/mips/hal2.c
+++ b/sound/mips/hal2.c
@@ -915,7 +915,7 @@
 	return 0;
 }
 
-static int __exit hal2_remove(struct platform_device *pdev)
+static int __devexit hal2_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
diff --git a/sound/mips/sgio2audio.c b/sound/mips/sgio2audio.c
index e497525..8691f4c 100644
--- a/sound/mips/sgio2audio.c
+++ b/sound/mips/sgio2audio.c
@@ -973,7 +973,7 @@
 	return 0;
 }
 
-static int __exit snd_sgio2audio_remove(struct platform_device *pdev)
+static int __devexit snd_sgio2audio_remove(struct platform_device *pdev)
 {
 	struct snd_card *card = platform_get_drvdata(pdev);
 
diff --git a/sound/pci/ctxfi/ctatc.c b/sound/pci/ctxfi/ctatc.c
index b1b3a64..7545464 100644
--- a/sound/pci/ctxfi/ctatc.c
+++ b/sound/pci/ctxfi/ctatc.c
@@ -1037,7 +1037,7 @@
 
 static int atc_line_surround_unmute(struct ct_atc *atc, unsigned char state)
 {
-	return atc_daio_unmute(atc, state, LINEO4);
+	return atc_daio_unmute(atc, state, LINEO2);
 }
 
 static int atc_line_clfe_unmute(struct ct_atc *atc, unsigned char state)
@@ -1047,7 +1047,7 @@
 
 static int atc_line_rear_unmute(struct ct_atc *atc, unsigned char state)
 {
-	return atc_daio_unmute(atc, state, LINEO2);
+	return atc_daio_unmute(atc, state, LINEO4);
 }
 
 static int atc_line_in_unmute(struct ct_atc *atc, unsigned char state)
diff --git a/sound/pci/echoaudio/echoaudio.c b/sound/pci/echoaudio/echoaudio.c
index da2065c..1305f7c 100644
--- a/sound/pci/echoaudio/echoaudio.c
+++ b/sound/pci/echoaudio/echoaudio.c
@@ -950,7 +950,7 @@
 	Control interface
 ******************************************************************************/
 
-#ifndef ECHOCARD_HAS_VMIXER
+#if !defined(ECHOCARD_HAS_VMIXER) || defined(ECHOCARD_HAS_LINE_OUT_GAIN)
 
 /******************* PCM output volume *******************/
 static int snd_echo_output_gain_info(struct snd_kcontrol *kcontrol,
@@ -1003,6 +1003,19 @@
 	return changed;
 }
 
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+/* On the Mia this one controls the line-out volume */
+static struct snd_kcontrol_new snd_echo_line_output_gain __devinitdata = {
+	.name = "Line Playback Volume",
+	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+	.access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+		  SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+	.info = snd_echo_output_gain_info,
+	.get = snd_echo_output_gain_get,
+	.put = snd_echo_output_gain_put,
+	.tlv = {.p = db_scale_output_gain},
+};
+#else
 static struct snd_kcontrol_new snd_echo_pcm_output_gain __devinitdata = {
 	.name = "PCM Playback Volume",
 	.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
@@ -1012,9 +1025,10 @@
 	.put = snd_echo_output_gain_put,
 	.tlv = {.p = db_scale_output_gain},
 };
-
 #endif
 
+#endif /* !ECHOCARD_HAS_VMIXER || ECHOCARD_HAS_LINE_OUT_GAIN */
+
 
 
 #ifdef ECHOCARD_HAS_INPUT_GAIN
@@ -2030,10 +2044,18 @@
 	snd_echo_vmixer.count = num_pipes_out(chip) * num_busses_out(chip);
 	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_vmixer, chip))) < 0)
 		goto ctl_error;
-#else
-	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_pcm_output_gain, chip))) < 0)
+#ifdef ECHOCARD_HAS_LINE_OUT_GAIN
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_line_output_gain, chip));
+	if (err < 0)
 		goto ctl_error;
 #endif
+#else /* ECHOCARD_HAS_VMIXER */
+	err = snd_ctl_add(chip->card,
+			  snd_ctl_new1(&snd_echo_pcm_output_gain, chip));
+	if (err < 0)
+		goto ctl_error;
+#endif /* ECHOCARD_HAS_VMIXER */
 
 #ifdef ECHOCARD_HAS_INPUT_GAIN
 	if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_echo_line_input_gain, chip))) < 0)
diff --git a/sound/pci/echoaudio/mia.c b/sound/pci/echoaudio/mia.c
index f3b9b45..f05c8c0 100644
--- a/sound/pci/echoaudio/mia.c
+++ b/sound/pci/echoaudio/mia.c
@@ -29,6 +29,7 @@
 #define ECHOCARD_HAS_ADAT	FALSE
 #define ECHOCARD_HAS_STEREO_BIG_ENDIAN32
 #define ECHOCARD_HAS_MIDI
+#define ECHOCARD_HAS_LINE_OUT_GAIN
 
 /* Pipe indexes */
 #define PX_ANALOG_OUT	0	/* 8 */
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 20a66f8..c9ad182 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2303,6 +2303,7 @@
  * white-list for enable_msi
  */
 static struct snd_pci_quirk msi_white_list[] __devinitdata = {
+	SND_PCI_QUIRK(0x103c, 0x30f7, "HP Pavilion dv4t-1300", 1),
 	SND_PCI_QUIRK(0x103c, 0x3607, "HP Compa CQ40", 1),
 	{}
 };
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index 215e72a..2d603f6 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -4032,6 +4032,127 @@
 }
 
 /*
+ * HP Touchsmart
+ * port-A (0x11)      - front hp-out
+ * port-B (0x14)      - unused
+ * port-C (0x15)      - unused
+ * port-D (0x12)      - rear line out
+ * port-E (0x1c)      - front mic-in
+ * port-F (0x16)      - Internal speakers
+ * digital-mic (0x17) - Internal mic
+ */
+
+static struct hda_verb ad1984a_touchsmart_verbs[] = {
+	/* DACs; unmute as default */
+	{0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	{0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+	/* Port-A (HP) mixer - route only from analog mixer */
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-A pin */
+	{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	/* Port-A (HP) pin - always unmuted */
+	{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	/* Port-E (int speaker) mixer - route only from analog mixer */
+	{0x25, AC_VERB_SET_AMP_GAIN_MUTE, 0x03},
+	/* Port-E pin */
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	{0x1c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+	{0x1c, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+	/* Port-F (int speaker) mixer - route only from analog mixer */
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+	/* Port-F pin */
+	{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+	{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* Analog mixer; mute as default */
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+	{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+	/* Analog Mix output amp */
+	{0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* capture sources */
+	/* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+	{0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	{0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+	{0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+	/* unsolicited event for pin-sense */
+	{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+	{0x1c, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+	/* allow to touch GPIO1 (for mute control) */
+	{0x01, AC_VERB_SET_GPIO_MASK, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x02},
+	{0x01, AC_VERB_SET_GPIO_DATA, 0x02}, /* first muted */
+	/* internal mic - dmic */
+	{0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+	/* set magic COEFs for dmic */
+	{0x01, AC_VERB_SET_COEF_INDEX, 0x13f7},
+	{0x01, AC_VERB_SET_PROC_COEF, 0x08},
+	{ } /* end */
+};
+
+static struct snd_kcontrol_new ad1984a_touchsmart_mixers[] = {
+	HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
+/*	HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),*/
+	{
+		.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+		.name = "Master Playback Switch",
+		.info = snd_hda_mixer_amp_switch_info,
+		.get = snd_hda_mixer_amp_switch_get,
+		.put = ad1884a_mobile_master_sw_put,
+		.private_value = HDA_COMPOSE_AMP_VAL(0x21, 3, 0, HDA_OUTPUT),
+	},
+	HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
+	HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
+	HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Mic Boost", 0x25, 0x0, HDA_OUTPUT),
+	HDA_CODEC_VOLUME("Internal Mic Boost", 0x17, 0x0, HDA_INPUT),
+	{ } /* end */
+};
+
+/* switch to external mic if plugged */
+static void ad1984a_touchsmart_automic(struct hda_codec *codec)
+{
+	if (snd_hda_codec_read(codec, 0x1c, 0,
+				     AC_VERB_GET_PIN_SENSE, 0) & 0x80000000) {
+		snd_hda_codec_write(codec, 0x0c, 0,
+				     AC_VERB_SET_CONNECT_SEL, 0x4);
+	} else {
+		snd_hda_codec_write(codec, 0x0c, 0,
+				     AC_VERB_SET_CONNECT_SEL, 0x5);
+	}
+}
+
+
+/* unsolicited event for HP jack sensing */
+static void ad1984a_touchsmart_unsol_event(struct hda_codec *codec,
+	unsigned int res)
+{
+	switch (res >> 26) {
+	case AD1884A_HP_EVENT:
+		ad1884a_hp_automute(codec);
+		break;
+	case AD1884A_MIC_EVENT:
+		ad1984a_touchsmart_automic(codec);
+		break;
+	}
+}
+
+/* initialize jack-sensing, too */
+static int ad1984a_touchsmart_init(struct hda_codec *codec)
+{
+	ad198x_init(codec);
+	ad1884a_hp_automute(codec);
+	ad1984a_touchsmart_automic(codec);
+	return 0;
+}
+
+
+/*
  */
 
 enum {
@@ -4039,6 +4160,7 @@
 	AD1884A_LAPTOP,
 	AD1884A_MOBILE,
 	AD1884A_THINKPAD,
+	AD1984A_TOUCHSMART,
 	AD1884A_MODELS
 };
 
@@ -4047,6 +4169,7 @@
 	[AD1884A_LAPTOP]	= "laptop",
 	[AD1884A_MOBILE]	= "mobile",
 	[AD1884A_THINKPAD]	= "thinkpad",
+	[AD1984A_TOUCHSMART]	= "touchsmart",
 };
 
 static struct snd_pci_quirk ad1884a_cfg_tbl[] = {
@@ -4059,6 +4182,7 @@
 	SND_PCI_QUIRK_MASK(0x103c, 0xff00, 0x3600, "HP laptop", AD1884A_LAPTOP),
 	SND_PCI_QUIRK_MASK(0x103c, 0xfff0, 0x7010, "HP laptop", AD1884A_MOBILE),
 	SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X300", AD1884A_THINKPAD),
+	SND_PCI_QUIRK(0x103c, 0x2a82, "Touchsmart", AD1984A_TOUCHSMART),
 	{}
 };
 
@@ -4142,6 +4266,21 @@
 		codec->patch_ops.unsol_event = ad1984a_thinkpad_unsol_event;
 		codec->patch_ops.init = ad1984a_thinkpad_init;
 		break;
+	case AD1984A_TOUCHSMART:
+		spec->mixers[0] = ad1984a_touchsmart_mixers;
+		spec->init_verbs[0] = ad1984a_touchsmart_verbs;
+		spec->multiout.dig_out_nid = 0;
+		codec->patch_ops.unsol_event = ad1984a_touchsmart_unsol_event;
+		codec->patch_ops.init = ad1984a_touchsmart_init;
+		/* set the upper-limit for mixer amp to 0dB for avoiding the
+		 * possible damage by overloading
+		 */
+		snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+					  (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+					  (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+					  (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+					  (1 << AC_AMPCAP_MUTE_SHIFT));
+		break;
 	}
 
 	return 0;
diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c
index 9d899ed..3fbbc8c 100644
--- a/sound/pci/hda/patch_conexant.c
+++ b/sound/pci/hda/patch_conexant.c
@@ -682,11 +682,13 @@
 };
 
 static struct hda_input_mux cxt5045_capture_source_benq = {
-	.num_items = 3,
+	.num_items = 5,
 	.items = {
 		{ "IntMic", 0x1 },
 		{ "ExtMic", 0x2 },
 		{ "LineIn", 0x3 },
+		{ "CD",     0x4 },
+		{ "Mixer",  0x0 },
 	}
 };
 
@@ -811,11 +813,19 @@
 };
 
 static struct snd_kcontrol_new cxt5045_benq_mixers[] = {
+	HDA_CODEC_VOLUME("CD Capture Volume", 0x1a, 0x04, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Capture Switch", 0x1a, 0x04, HDA_INPUT),
+	HDA_CODEC_VOLUME("CD Playback Volume", 0x17, 0x4, HDA_INPUT),
+	HDA_CODEC_MUTE("CD Playback Switch", 0x17, 0x4, HDA_INPUT),
+
 	HDA_CODEC_VOLUME("Line In Capture Volume", 0x1a, 0x03, HDA_INPUT),
 	HDA_CODEC_MUTE("Line In Capture Switch", 0x1a, 0x03, HDA_INPUT),
 	HDA_CODEC_VOLUME("Line In Playback Volume", 0x17, 0x3, HDA_INPUT),
 	HDA_CODEC_MUTE("Line In Playback Switch", 0x17, 0x3, HDA_INPUT),
 
+	HDA_CODEC_VOLUME("Mixer Capture Volume", 0x1a, 0x0, HDA_INPUT),
+	HDA_CODEC_MUTE("Mixer Capture Switch", 0x1a, 0x0, HDA_INPUT),
+
 	{}
 };
 
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 1296058..7810d3d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -12660,7 +12660,7 @@
 		.init_hook = alc268_toshiba_automute,
 	},
 	[ALC268_ACER] = {
-		.mixers = { alc268_acer_mixer, alc268_capture_nosrc_mixer,
+		.mixers = { alc268_acer_mixer, alc268_capture_alt_mixer,
 			    alc268_beep_mixer },
 		.init_verbs = { alc268_base_init_verbs, alc268_eapd_verbs,
 				alc268_acer_verbs },
@@ -16852,6 +16852,7 @@
 	SND_PCI_QUIRK(0x105b, 0x0cd6, "Foxconn", ALC662_ECS),
 	SND_PCI_QUIRK(0x105b, 0x0d47, "Foxconn 45CMX/45GMX/45CMX-K",
 		      ALC662_3ST_6ch_DIG),
+	SND_PCI_QUIRK(0x1179, 0xff6e, "Toshiba NB200", ALC663_ASUS_MODE4),
 	SND_PCI_QUIRK(0x144d, 0xca00, "Samsung NC10", ALC272_SAMSUNG_NC10),
 	SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
 		      ALC662_3ST_6ch_DIG),
@@ -17145,70 +17146,145 @@
  * BIOS auto configuration
  */
 
-/* add playback controls from the parsed DAC table */
-static int alc662_auto_create_multi_out_ctls(struct alc_spec *spec,
-					     const struct auto_pin_cfg *cfg)
+/* convert from MIX nid to DAC */
+static inline hda_nid_t alc662_mix_to_dac(hda_nid_t nid)
+{
+	if (nid == 0x0f)
+		return 0x02;
+	else if (nid >= 0x0c && nid <= 0x0e)
+		return nid - 0x0c + 0x02;
+	else
+		return 0;
+}
+
+/* get MIX nid connected to the given pin targeted to DAC */
+static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
+				   hda_nid_t dac)
+{
+	hda_nid_t mix[4];
+	int i, num;
+
+	num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
+	for (i = 0; i < num; i++) {
+		if (alc662_mix_to_dac(mix[i]) == dac)
+			return mix[i];
+	}
+	return 0;
+}
+
+/* look for an empty DAC slot */
+static hda_nid_t alc662_look_for_dac(struct hda_codec *codec, hda_nid_t pin)
+{
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t srcs[5];
+	int i, j, num;
+
+	num = snd_hda_get_connections(codec, pin, srcs, ARRAY_SIZE(srcs));
+	if (num < 0)
+		return 0;
+	for (i = 0; i < num; i++) {
+		hda_nid_t nid = alc662_mix_to_dac(srcs[i]);
+		if (!nid)
+			continue;
+		for (j = 0; j < spec->multiout.num_dacs; j++)
+			if (spec->multiout.dac_nids[j] == nid)
+				break;
+		if (j >= spec->multiout.num_dacs)
+			return nid;
+	}
+	return 0;
+}
+
+/* fill in the dac_nids table from the parsed pin configuration */
+static int alc662_auto_fill_dac_nids(struct hda_codec *codec,
+				     const struct auto_pin_cfg *cfg)
+{
+	struct alc_spec *spec = codec->spec;
+	int i;
+	hda_nid_t dac;
+
+	spec->multiout.dac_nids = spec->private_dac_nids;
+	for (i = 0; i < cfg->line_outs; i++) {
+		dac = alc662_look_for_dac(codec, cfg->line_out_pins[i]);
+		if (!dac)
+			continue;
+		spec->multiout.dac_nids[spec->multiout.num_dacs++] = dac;
+	}
+	return 0;
+}
+
+static int alc662_add_vol_ctl(struct alc_spec *spec, const char *pfx,
+			      hda_nid_t nid, unsigned int chs)
 {
 	char name[32];
+	sprintf(name, "%s Playback Volume", pfx);
+	return add_control(spec, ALC_CTL_WIDGET_VOL, name,
+			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_OUTPUT));
+}
+
+static int alc662_add_sw_ctl(struct alc_spec *spec, const char *pfx,
+			     hda_nid_t nid, unsigned int chs)
+{
+	char name[32];
+	sprintf(name, "%s Playback Switch", pfx);
+	return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+			   HDA_COMPOSE_AMP_VAL(nid, chs, 0, HDA_INPUT));
+}
+
+#define alc662_add_stereo_vol(spec, pfx, nid) \
+	alc662_add_vol_ctl(spec, pfx, nid, 3)
+#define alc662_add_stereo_sw(spec, pfx, nid) \
+	alc662_add_sw_ctl(spec, pfx, nid, 3)
+
+/* add playback controls from the parsed DAC table */
+static int alc662_auto_create_multi_out_ctls(struct hda_codec *codec,
+					     const struct auto_pin_cfg *cfg)
+{
+	struct alc_spec *spec = codec->spec;
 	static const char *chname[4] = {
 		"Front", "Surround", NULL /*CLFE*/, "Side"
 	};
-	hda_nid_t nid;
+	hda_nid_t nid, mix;
 	int i, err;
 
 	for (i = 0; i < cfg->line_outs; i++) {
-		if (!spec->multiout.dac_nids[i])
+		nid = spec->multiout.dac_nids[i];
+		if (!nid)
 			continue;
-		nid = alc880_idx_to_dac(i);
+		mix = alc662_dac_to_mix(codec, cfg->line_out_pins[i], nid);
+		if (!mix)
+			continue;
 		if (i == 2) {
 			/* Center/LFE */
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "Center Playback Volume",
-					  HDA_COMPOSE_AMP_VAL(nid, 1, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, "Center", nid, 1);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_VOL,
-					  "LFE Playback Volume",
-					  HDA_COMPOSE_AMP_VAL(nid, 2, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, "LFE", nid, 2);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE,
-					  "Center Playback Switch",
-					  HDA_COMPOSE_AMP_VAL(0x0e, 1, 0,
-							      HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, "Center", mix, 1);
 			if (err < 0)
 				return err;
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE,
-					  "LFE Playback Switch",
-					  HDA_COMPOSE_AMP_VAL(0x0e, 2, 0,
-							      HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, "LFE", mix, 2);
 			if (err < 0)
 				return err;
 		} else {
 			const char *pfx;
 			if (cfg->line_outs == 1 &&
 			    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT) {
-				if (!cfg->hp_pins)
+				if (cfg->hp_outs)
 					pfx = "Speaker";
 				else
 					pfx = "PCM";
 			} else
 				pfx = chname[i];
-			sprintf(name, "%s Playback Volume", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
-					  HDA_COMPOSE_AMP_VAL(nid, 3, 0,
-							      HDA_OUTPUT));
+			err = alc662_add_vol_ctl(spec, pfx, nid, 3);
 			if (err < 0)
 				return err;
 			if (cfg->line_outs == 1 &&
 			    cfg->line_out_type == AUTO_PIN_SPEAKER_OUT)
 				pfx = "Speaker";
-			sprintf(name, "%s Playback Switch", pfx);
-			err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				HDA_COMPOSE_AMP_VAL(alc880_idx_to_mixer(i),
-						    3, 0, HDA_INPUT));
+			err = alc662_add_sw_ctl(spec, pfx, mix, 3);
 			if (err < 0)
 				return err;
 		}
@@ -17217,54 +17293,38 @@
 }
 
 /* add playback controls for speaker and HP outputs */
-static int alc662_auto_create_extra_out(struct alc_spec *spec, hda_nid_t pin,
+/* return DAC nid if any new DAC is assigned */
+static int alc662_auto_create_extra_out(struct hda_codec *codec, hda_nid_t pin,
 					const char *pfx)
 {
-	hda_nid_t nid;
+	struct alc_spec *spec = codec->spec;
+	hda_nid_t nid, mix;
 	int err;
-	char name[32];
 
 	if (!pin)
 		return 0;
-
-	if (pin == 0x17) {
-		/* ALC663 has a mono output pin on 0x17 */
+	nid = alc662_look_for_dac(codec, pin);
+	if (!nid) {
+		char name[32];
+		/* the corresponding DAC is already occupied */
+		if (!(get_wcaps(codec, pin) & AC_WCAP_OUT_AMP))
+			return 0; /* no way */
+		/* create a switch only */
 		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(pin, 2, 0, HDA_OUTPUT));
+		return add_control(spec, ALC_CTL_WIDGET_MUTE, name,
+				   HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
+	}
+
+	mix = alc662_dac_to_mix(codec, pin, nid);
+	if (!mix)
+		return 0;
+	err = alc662_add_vol_ctl(spec, pfx, nid, 3);
+	if (err < 0)
 		return err;
-	}
-
-	if (alc880_is_fixed_pin(pin)) {
-		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
-		/* printk(KERN_DEBUG "DAC nid=%x\n",nid); */
-		/* specify the DAC as the extra output */
-		if (!spec->multiout.hp_nid)
-			spec->multiout.hp_nid = nid;
-		else
-			spec->multiout.extra_out_nid[0] = nid;
-		/* control HP volume/switch on the output mixer amp */
-		nid = alc880_idx_to_dac(alc880_fixed_pin_idx(pin));
-		sprintf(name, "%s Playback Volume", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_VOL, name,
-				  HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_OUTPUT));
-		if (err < 0)
-			return err;
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_BIND_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(nid, 3, 2, HDA_INPUT));
-		if (err < 0)
-			return err;
-	} else if (alc880_is_multi_pin(pin)) {
-		/* set manual connection */
-		/* we have only a switch on HP-out PIN */
-		sprintf(name, "%s Playback Switch", pfx);
-		err = add_control(spec, ALC_CTL_WIDGET_MUTE, name,
-				  HDA_COMPOSE_AMP_VAL(pin, 3, 0, HDA_OUTPUT));
-		if (err < 0)
-			return err;
-	}
-	return 0;
+	err = alc662_add_sw_ctl(spec, pfx, mix, 3);
+	if (err < 0)
+		return err;
+	return nid;
 }
 
 /* create playback/capture controls for input pins */
@@ -17273,30 +17333,35 @@
 
 static void alc662_auto_set_output_and_unmute(struct hda_codec *codec,
 					      hda_nid_t nid, int pin_type,
-					      int dac_idx)
+					      hda_nid_t dac)
 {
+	int i, num;
+	hda_nid_t srcs[4];
+
 	alc_set_pin_output(codec, nid, pin_type);
 	/* need the manual connection? */
-	if (alc880_is_multi_pin(nid)) {
-		struct alc_spec *spec = codec->spec;
-		int idx = alc880_multi_pin_idx(nid);
-		snd_hda_codec_write(codec, alc880_idx_to_selector(idx), 0,
-				    AC_VERB_SET_CONNECT_SEL,
-				    alc880_dac_to_idx(spec->multiout.dac_nids[dac_idx]));
+	num = snd_hda_get_connections(codec, nid, srcs, ARRAY_SIZE(srcs));
+	if (num <= 1)
+		return;
+	for (i = 0; i < num; i++) {
+		if (alc662_mix_to_dac(srcs[i]) != dac)
+			continue;
+		snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_CONNECT_SEL, i);
+		return;
 	}
 }
 
 static void alc662_auto_init_multi_out(struct hda_codec *codec)
 {
 	struct alc_spec *spec = codec->spec;
+	int pin_type = get_pin_type(spec->autocfg.line_out_type);
 	int i;
 
 	for (i = 0; i <= HDA_SIDE; i++) {
 		hda_nid_t nid = spec->autocfg.line_out_pins[i];
-		int pin_type = get_pin_type(spec->autocfg.line_out_type);
 		if (nid)
 			alc662_auto_set_output_and_unmute(codec, nid, pin_type,
-							  i);
+					spec->multiout.dac_nids[i]);
 	}
 }
 
@@ -17306,12 +17371,13 @@
 	hda_nid_t pin;
 
 	pin = spec->autocfg.hp_pins[0];
-	if (pin) /* connect to front */
-		/* use dac 0 */
-		alc662_auto_set_output_and_unmute(codec, pin, PIN_HP, 0);
+	if (pin)
+		alc662_auto_set_output_and_unmute(codec, pin, PIN_HP,
+						  spec->multiout.hp_nid);
 	pin = spec->autocfg.speaker_pins[0];
 	if (pin)
-		alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT, 0);
+		alc662_auto_set_output_and_unmute(codec, pin, PIN_OUT,
+					spec->multiout.extra_out_nid[0]);
 }
 
 #define ALC662_PIN_CD_NID		ALC880_PIN_CD_NID
@@ -17349,21 +17415,25 @@
 	if (!spec->autocfg.line_outs)
 		return 0; /* can't find valid BIOS pin config */
 
-	err = alc880_auto_fill_dac_nids(spec, &spec->autocfg);
+	err = alc662_auto_fill_dac_nids(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_multi_out_ctls(spec, &spec->autocfg);
+	err = alc662_auto_create_multi_out_ctls(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_extra_out(spec,
+	err = alc662_auto_create_extra_out(codec,
 					   spec->autocfg.speaker_pins[0],
 					   "Speaker");
 	if (err < 0)
 		return err;
-	err = alc662_auto_create_extra_out(spec, spec->autocfg.hp_pins[0],
+	if (err)
+		spec->multiout.extra_out_nid[0] = err;
+	err = alc662_auto_create_extra_out(codec, spec->autocfg.hp_pins[0],
 					   "Headphone");
 	if (err < 0)
 		return err;
+	if (err)
+		spec->multiout.hp_nid = err;
 	err = alc662_auto_create_input_ctls(codec, &spec->autocfg);
 	if (err < 0)
 		return err;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 826137e..a9b2682 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -182,8 +182,8 @@
 
 struct sigmatel_mic_route {
 	hda_nid_t pin;
-	unsigned char mux_idx;
-	unsigned char dmux_idx;
+	signed char mux_idx;
+	signed char dmux_idx;
 };
 
 struct sigmatel_spec {
@@ -3469,18 +3469,26 @@
 			break;
 	if (i <= AUTO_PIN_FRONT_MIC) {
 		/* analog pin */
-		mic->dmux_idx = 0;
 		i = get_connection_index(codec, spec->mux_nids[0], pin);
 		if (i < 0)
 			return -1;
 		mic->mux_idx = i;
+		mic->dmux_idx = -1;
+		if (spec->dmux_nids)
+			mic->dmux_idx = get_connection_index(codec,
+							     spec->dmux_nids[0],
+							     spec->mux_nids[0]);
 	}  else if (spec->dmux_nids) {
 		/* digital pin */
-		mic->mux_idx = 0;
 		i = get_connection_index(codec, spec->dmux_nids[0], pin);
 		if (i < 0)
 			return -1;
 		mic->dmux_idx = i;
+		mic->mux_idx = -1;
+		if (spec->mux_nids)
+			mic->mux_idx = get_connection_index(codec,
+							    spec->mux_nids[0],
+							    spec->dmux_nids[0]);
 	}
 	return 0;
 }
@@ -4557,11 +4565,11 @@
 		mic = &spec->ext_mic;
 	else
 		mic = &spec->int_mic;
-	if (mic->dmux_idx)
+	if (mic->dmux_idx >= 0)
 		snd_hda_codec_write_cache(codec, spec->dmux_nids[0], 0,
 					  AC_VERB_SET_CONNECT_SEL,
 					  mic->dmux_idx);
-	else
+	if (mic->mux_idx >= 0)
 		snd_hda_codec_write_cache(codec, spec->mux_nids[0], 0,
 					  AC_VERB_SET_CONNECT_SEL,
 					  mic->mux_idx);
diff --git a/sound/pci/intel8x0.c b/sound/pci/intel8x0.c
index 171ada5..754867e 100644
--- a/sound/pci/intel8x0.c
+++ b/sound/pci/intel8x0.c
@@ -1954,6 +1954,18 @@
 		.name = "Sony S1XP",
 		.type = AC97_TUNE_INV_EAPD
 	},
+	{
+		.subvendor = 0x104d,
+		.subdevice = 0x81c0,
+		.name = "Sony VAIO VGN-T350P", /*AD1981B*/
+		.type = AC97_TUNE_INV_EAPD
+	},
+	{
+		.subvendor = 0x104d,
+		.subdevice = 0x81c5,
+		.name = "Sony VAIO VGN-B1VP", /*AD1981B*/
+		.type = AC97_TUNE_INV_EAPD
+	},
  	{
 		.subvendor = 0x1043,
 		.subdevice = 0x80f3,
diff --git a/sound/ppc/keywest.c b/sound/ppc/keywest.c
index 835fa19..d06f780 100644
--- a/sound/ppc/keywest.c
+++ b/sound/ppc/keywest.c
@@ -59,6 +59,18 @@
 	strlcpy(info.type, "keywest", I2C_NAME_SIZE);
 	info.addr = keywest_ctx->addr;
 	keywest_ctx->client = i2c_new_device(adapter, &info);
+	if (!keywest_ctx->client)
+		return -ENODEV;
+	/*
+	 * We know the driver is already loaded, so the device should be
+	 * already bound. If not it means binding failed, and then there
+	 * is no point in keeping the device instantiated.
+	 */
+	if (!keywest_ctx->client->driver) {
+		i2c_unregister_device(keywest_ctx->client);
+		keywest_ctx->client = NULL;
+		return -ENODEV;
+	}
 	
 	/*
 	 * Let i2c-core delete that device on driver removal.
@@ -86,7 +98,7 @@
 	{ }
 };
 
-struct i2c_driver keywest_driver = {
+static struct i2c_driver keywest_driver = {
 	.driver = {
 		.name = "PMac Keywest Audio",
 	},
diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig
index ac927ff..97f1a25 100644
--- a/sound/soc/blackfin/Kconfig
+++ b/sound/soc/blackfin/Kconfig
@@ -7,15 +7,6 @@
 	  mode (supports single stereo In/Out).
 	  You will also need to select the audio interfaces to support below.
 
-config SND_BF5XX_TDM
-	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
-	depends on (BLACKFIN && SND_SOC)
-	help
-	  Say Y or M if you want to add support for codecs attached to
-	  the Blackfin SPORT (synchronous serial ports) interface in TDM
-	  mode.
-	  You will also need to select the audio interfaces to support below.
-
 config SND_BF5XX_SOC_SSM2602
 	tristate "SoC SSM2602 Audio support for BF52x ezkit"
 	depends on SND_BF5XX_I2S
@@ -41,6 +32,31 @@
 	  Enter the GPIO used to control AD73311's SE pin. Acceptable
 	  values are 0 to 7
 
+config SND_BF5XX_TDM
+	tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip"
+	depends on (BLACKFIN && SND_SOC)
+	help
+	  Say Y or M if you want to add support for codecs attached to
+	  the Blackfin SPORT (synchronous serial ports) interface in TDM
+	  mode.
+	  You will also need to select the audio interfaces to support below.
+
+config SND_BF5XX_SOC_AD1836
+	tristate "SoC AD1836 Audio support for BF5xx"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1836
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
+config SND_BF5XX_SOC_AD1938
+	tristate "SoC AD1938 Audio support for Blackfin"
+	depends on SND_BF5XX_TDM
+	select SND_BF5XX_SOC_TDM
+	select SND_SOC_AD1938
+	help
+	  Say Y if you want to add support for AD1938 codec on Blackfin.
+
 config SND_BF5XX_AC97
 	tristate "SoC AC97 Audio for the ADI BF5xx chip"
 	depends on BLACKFIN
@@ -71,6 +87,30 @@
 	  Say y if you want AC97 driver to support up to 5.1 channel audio.
 	  this mode will consume much more memory for DMA.
 
+config SND_BF5XX_HAVE_COLD_RESET
+	bool "BOARD has COLD Reset GPIO"
+	depends on SND_BF5XX_AC97
+	default y if BFIN548_EZKIT
+	default n if !BFIN548_EZKIT
+
+config SND_BF5XX_RESET_GPIO_NUM
+	int "Set a GPIO for cold reset"
+	depends on SND_BF5XX_HAVE_COLD_RESET
+	range 0 159
+	default 19 if BFIN548_EZKIT
+	default 5 if BFIN537_STAMP
+	default 0
+	help
+	  Set the correct GPIO for RESET the sound chip.
+
+config SND_BF5XX_SOC_AD1980
+	tristate "SoC AD1980/1 Audio support for BF5xx"
+	depends on SND_BF5XX_AC97
+	select SND_BF5XX_SOC_AC97
+	select SND_SOC_AD1980
+	help
+	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
+
 config SND_BF5XX_SOC_SPORT
 	tristate
 
@@ -88,30 +128,6 @@
 	select SND_SOC_AC97_BUS
 	select SND_BF5XX_SOC_SPORT
 
-config SND_BF5XX_SOC_AD1836
-	tristate "SoC AD1836 Audio support for BF5xx"
-	depends on SND_BF5XX_TDM
-	select SND_BF5XX_SOC_TDM
-	select SND_SOC_AD1836
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1980
-	tristate "SoC AD1980/1 Audio support for BF5xx"
-	depends on SND_BF5XX_AC97
-	select SND_BF5XX_SOC_AC97
-	select SND_SOC_AD1980
-	help
-	  Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT.
-
-config SND_BF5XX_SOC_AD1938
-        tristate "SoC AD1938 Audio support for Blackfin"
-        depends on SND_BF5XX_TDM
-        select SND_BF5XX_SOC_TDM
-        select SND_SOC_AD1938
-        help
-          Say Y if you want to add support for AD1938 codec on Blackfin.
-
 config SND_BF5XX_SPORT_NUM
 	int "Set a SPORT for Sound chip"
 	depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM)
@@ -120,19 +136,3 @@
 	default 0
 	help
 	  Set the correct SPORT for sound chip.
-
-config SND_BF5XX_HAVE_COLD_RESET
-	bool "BOARD has COLD Reset GPIO"
-	depends on SND_BF5XX_AC97
-	default y if BFIN548_EZKIT
-	default n if !BFIN548_EZKIT
-
-config SND_BF5XX_RESET_GPIO_NUM
-	int "Set a GPIO for cold reset"
-	depends on SND_BF5XX_HAVE_COLD_RESET
-	range 0 159
-	default 19 if BFIN548_EZKIT
-	default 5 if BFIN537_STAMP
-	default 0
-	help
-	  Set the correct GPIO for RESET the sound chip.
diff --git a/sound/soc/blackfin/bf5xx-i2s.c b/sound/soc/blackfin/bf5xx-i2s.c
index 1e9d161..084b688 100644
--- a/sound/soc/blackfin/bf5xx-i2s.c
+++ b/sound/soc/blackfin/bf5xx-i2s.c
@@ -77,12 +77,12 @@
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
diff --git a/sound/soc/blackfin/bf5xx-tdm.c b/sound/soc/blackfin/bf5xx-tdm.c
index 3096bad..ff546e9 100644
--- a/sound/soc/blackfin/bf5xx-tdm.c
+++ b/sound/soc/blackfin/bf5xx-tdm.c
@@ -78,12 +78,12 @@
  * TFS. When Port G is selected and EMAC then there is a conflict between
  * the PHY interrupt line and TFS.  Current settings prevent the conflict
  * by ignoring the TFS pin when Port G is selected. This allows both
- * ssm2602 using Port G and EMAC concurrently.
+ * codecs and EMAC using Port G concurrently.
  */
-#ifdef CONFIG_BF527_SPORT0_PORTF
-#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
-#else
+#ifdef CONFIG_BF527_SPORT0_PORTG
 #define LOCAL_SPORT0_TFS (0)
+#else
+#define LOCAL_SPORT0_TFS (P_SPORT0_TFS)
 #endif
 
 static u16 sport_req[][7] = { {P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS,
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index 12a6c54..4ae7070 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -97,22 +97,19 @@
 	DAVINCI_MCBSP_WORD_32,
 };
 
-static struct davinci_pcm_dma_params davinci_i2s_pcm_out = {
-	.name = "I2S PCM Stereo out",
-};
-
-static struct davinci_pcm_dma_params davinci_i2s_pcm_in = {
-	.name = "I2S PCM Stereo in",
-};
-
 struct davinci_mcbsp_dev {
+	/*
+	 * dma_params must be first because rtd->dai->cpu_dai->private_data
+	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+	 * davinci_pcm_open.
+	 */
+	struct davinci_pcm_dma_params	dma_params[2];
 	void __iomem			*base;
 #define MOD_DSP_A	0
 #define MOD_DSP_B	1
 	int				mode;
 	u32				pcr;
 	struct clk			*clk;
-	struct davinci_pcm_dma_params	*dma_params[2];
 };
 
 static inline void davinci_mcbsp_write_reg(struct davinci_mcbsp_dev *dev,
@@ -215,14 +212,6 @@
 	toggle_clock(dev, playback);
 }
 
-static int davinci_i2s_startup(struct snd_pcm_substream *substream,
-			       struct snd_soc_dai *cpu_dai)
-{
-	struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
-	cpu_dai->dma_data = dev->dma_params[substream->stream];
-	return 0;
-}
-
 #define DEFAULT_BITPERSAMPLE	16
 
 static int davinci_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
@@ -353,8 +342,9 @@
 				 struct snd_pcm_hw_params *params,
 				 struct snd_soc_dai *dai)
 {
-	struct davinci_pcm_dma_params *dma_params = dai->dma_data;
 	struct davinci_mcbsp_dev *dev = dai->private_data;
+	struct davinci_pcm_dma_params *dma_params =
+					&dev->dma_params[substream->stream];
 	struct snd_interval *i = NULL;
 	int mcbsp_word_length;
 	unsigned int rcr, xcr, srgr;
@@ -472,7 +462,6 @@
 #define DAVINCI_I2S_RATES	SNDRV_PCM_RATE_8000_96000
 
 static struct snd_soc_dai_ops davinci_i2s_dai_ops = {
-	.startup 	= davinci_i2s_startup,
 	.shutdown	= davinci_i2s_shutdown,
 	.prepare	= davinci_i2s_prepare,
 	.trigger	= davinci_i2s_trigger,
@@ -534,12 +523,10 @@
 
 	dev->base = (void __iomem *)IO_ADDRESS(mem->start);
 
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &davinci_i2s_pcm_out;
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DXR_REG);
 
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &davinci_i2s_pcm_in;
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->dma_addr =
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].dma_addr =
 	    (dma_addr_t)(io_v2p(dev->base) + DAVINCI_MCBSP_DRR_REG);
 
 	/* first TX, then RX */
@@ -549,7 +536,7 @@
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK].channel = res->start;
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
@@ -557,7 +544,7 @@
 		ret = -ENXIO;
 		goto err_free_mem;
 	}
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE]->channel = res->start;
+	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE].channel = res->start;
 
 	davinci_i2s_dai.private_data = dev;
 	ret = snd_soc_register_dai(&davinci_i2s_dai);
diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 7a06c0a..5d1f98a 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -332,14 +332,6 @@
 		printk(KERN_ERR "GBLCTL write error\n");
 }
 
-static int davinci_mcasp_startup(struct snd_pcm_substream *substream,
-						struct snd_soc_dai *cpu_dai)
-{
-	struct davinci_audio_dev *dev = cpu_dai->private_data;
-	cpu_dai->dma_data = dev->dma_params[substream->stream];
-	return 0;
-}
-
 static void mcasp_start_rx(struct davinci_audio_dev *dev)
 {
 	mcasp_set_ctl_reg(dev->base + DAVINCI_MCASP_GBLCTLR_REG, RXHCLKRST);
@@ -386,17 +378,17 @@
 
 static void davinci_mcasp_start(struct davinci_audio_dev *dev, int stream)
 {
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (dev->txnumevt)	/* enable FIFO */
+			mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_start_tx(dev);
-	else
+	} else {
+		if (dev->rxnumevt)	/* enable FIFO */
+			mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_start_rx(dev);
-
-	/* enable FIFO */
-	if (dev->txnumevt)
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
-	if (dev->rxnumevt)
-		mcasp_set_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+	}
 }
 
 static void mcasp_stop_rx(struct davinci_audio_dev *dev)
@@ -413,17 +405,17 @@
 
 static void davinci_mcasp_stop(struct davinci_audio_dev *dev, int stream)
 {
-	if (stream == SNDRV_PCM_STREAM_PLAYBACK)
+	if (stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		if (dev->txnumevt)	/* disable FIFO */
+			mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_stop_tx(dev);
-	else
+	} else {
+		if (dev->rxnumevt)	/* disable FIFO */
+			mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL,
+								FIFO_ENABLE);
 		mcasp_stop_rx(dev);
-
-	/* disable FIFO */
-	if (dev->txnumevt)
-		mcasp_clr_bits(dev->base + DAVINCI_MCASP_WFIFOCTL, FIFO_ENABLE);
-
-	if (dev->rxnumevt)
-		mcasp_clr_bits(dev->base + DAVINCI_MCASP_RFIFOCTL, FIFO_ENABLE);
+	}
 }
 
 static int davinci_mcasp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
@@ -720,7 +712,7 @@
 {
 	struct davinci_audio_dev *dev = cpu_dai->private_data;
 	struct davinci_pcm_dma_params *dma_params =
-					dev->dma_params[substream->stream];
+					&dev->dma_params[substream->stream];
 	int word_length;
 	u8 numevt;
 
@@ -798,7 +790,6 @@
 }
 
 static struct snd_soc_dai_ops davinci_mcasp_dai_ops = {
-	.startup 	= davinci_mcasp_startup,
 	.trigger	= davinci_mcasp_trigger,
 	.hw_params	= davinci_mcasp_hw_params,
 	.set_fmt	= davinci_mcasp_set_dai_fmt,
@@ -849,20 +840,12 @@
 	struct resource *mem, *ioarea, *res;
 	struct snd_platform_data *pdata;
 	struct davinci_audio_dev *dev;
-	int count = 0;
 	int ret = 0;
 
 	dev = kzalloc(sizeof(struct davinci_audio_dev), GFP_KERNEL);
 	if (!dev)
 		return	-ENOMEM;
 
-	dma_data = kzalloc(sizeof(struct davinci_pcm_dma_params) * 2,
-								GFP_KERNEL);
-	if (!dma_data) {
-		ret = -ENOMEM;
-		goto err_release_dev;
-	}
-
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!mem) {
 		dev_err(&pdev->dev, "no mem resource?\n");
@@ -897,11 +880,10 @@
 	dev->txnumevt = pdata->txnumevt;
 	dev->rxnumevt = pdata->rxnumevt;
 
-	dma_data[count].name = "I2S PCM Stereo out";
-	dma_data[count].eventq_no = pdata->eventq_no;
-	dma_data[count].dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
+	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
+	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
 							io_v2p(dev->base));
-	dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK] = &dma_data[count];
 
 	/* first TX, then RX */
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -910,13 +892,12 @@
 		goto err_release_region;
 	}
 
-	dma_data[count].channel = res->start;
-	count++;
-	dma_data[count].name = "I2S PCM Stereo in";
-	dma_data[count].eventq_no = pdata->eventq_no;
-	dma_data[count].dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
+	dma_data->channel = res->start;
+
+	dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
+	dma_data->eventq_no = pdata->eventq_no;
+	dma_data->dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
 							io_v2p(dev->base));
-	dev->dma_params[SNDRV_PCM_STREAM_CAPTURE] = &dma_data[count];
 
 	res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
 	if (!res) {
@@ -924,7 +905,7 @@
 		goto err_release_region;
 	}
 
-	dma_data[count].channel = res->start;
+	dma_data->channel = res->start;
 	davinci_mcasp_dai[pdata->op_mode].private_data = dev;
 	davinci_mcasp_dai[pdata->op_mode].dev = &pdev->dev;
 	ret = snd_soc_register_dai(&davinci_mcasp_dai[pdata->op_mode]);
@@ -936,8 +917,6 @@
 err_release_region:
 	release_mem_region(mem->start, (mem->end - mem->start) + 1);
 err_release_data:
-	kfree(dma_data);
-err_release_dev:
 	kfree(dev);
 
 	return ret;
@@ -946,7 +925,6 @@
 static int davinci_mcasp_remove(struct platform_device *pdev)
 {
 	struct snd_platform_data *pdata = pdev->dev.platform_data;
-	struct davinci_pcm_dma_params *dma_data;
 	struct davinci_audio_dev *dev;
 	struct resource *mem;
 
@@ -959,8 +937,6 @@
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	release_mem_region(mem->start, (mem->end - mem->start) + 1);
 
-	dma_data = dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
-	kfree(dma_data);
 	kfree(dev);
 
 	return 0;
diff --git a/sound/soc/davinci/davinci-mcasp.h b/sound/soc/davinci/davinci-mcasp.h
index 554354c..9d179cc 100644
--- a/sound/soc/davinci/davinci-mcasp.h
+++ b/sound/soc/davinci/davinci-mcasp.h
@@ -39,10 +39,15 @@
 };
 
 struct davinci_audio_dev {
+	/*
+	 * dma_params must be first because rtd->dai->cpu_dai->private_data
+	 * is cast to a pointer of an array of struct davinci_pcm_dma_params in
+	 * davinci_pcm_open.
+	 */
+	struct davinci_pcm_dma_params dma_params[2];
 	void __iomem *base;
 	int sample_rate;
 	struct clk *clk;
-	struct davinci_pcm_dma_params *dma_params[2];
 	unsigned int codec_fmt;
 
 	/* McASP specific data */
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 2f7da49..c73a915 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -126,16 +126,9 @@
 static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
 {
 	struct davinci_runtime_data *prtd = substream->runtime->private_data;
-	struct snd_soc_pcm_runtime *rtd = substream->private_data;
-	struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
 	struct edmacc_param p_ram;
 	int ret;
 
-	if (!dma_data)
-		return -ENODEV;
-
-	prtd->params = dma_data;
-
 	/* Request master DMA channel */
 	ret = edma_alloc_channel(prtd->params->channel,
 				  davinci_pcm_dma_irq, substream,
@@ -244,6 +237,11 @@
 	struct snd_pcm_runtime *runtime = substream->runtime;
 	struct davinci_runtime_data *prtd;
 	int ret = 0;
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct davinci_pcm_dma_params *pa = rtd->dai->cpu_dai->private_data;
+	struct davinci_pcm_dma_params *params = &pa[substream->stream];
+	if (!params)
+		return -ENODEV;
 
 	snd_soc_set_runtime_hwparams(substream, &davinci_pcm_hardware);
 	/* ensure that buffer size is a multiple of period size */
@@ -257,6 +255,7 @@
 		return -ENOMEM;
 
 	spin_lock_init(&prtd->lock);
+	prtd->params = params;
 
 	runtime->private_data = prtd;
 
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index 63d9625..8746606 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -17,7 +17,6 @@
 
 
 struct davinci_pcm_dma_params {
-	char *name;			/* stream identifier */
 	int channel;			/* sync dma channel ID */
 	unsigned short acnt;
 	dma_addr_t dma_addr;		/* device physical address for DMA */
diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig
index 6375b4e..dcb3181b 100644
--- a/sound/soc/pxa/Kconfig
+++ b/sound/soc/pxa/Kconfig
@@ -138,7 +138,7 @@
 
 config SND_PXA2XX_SOC_IMOTE2
        tristate "SoC Audio support for IMote 2"
-       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2
+       depends on SND_PXA2XX_SOC && MACH_INTELMOTE2 && I2C
        select SND_PXA2XX_SOC_I2S
        select SND_SOC_WM8940
        help
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index ab5a3ac..9efcfd0 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -898,6 +898,11 @@
  * build a feature control
  */
 
+static size_t append_ctl_name(struct snd_kcontrol *kctl, const char *str)
+{
+	return strlcat(kctl->id.name, str, sizeof(kctl->id.name));
+}
+
 static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
 			      unsigned int ctl_mask, int control,
 			      struct usb_audio_term *iterm, int unitid)
@@ -978,13 +983,13 @@
 		 */
 		if (! mapped_name && ! (state->oterm.type >> 16)) {
 			if ((state->oterm.type & 0xff00) == 0x0100) {
-				len = strlcat(kctl->id.name, " Capture", sizeof(kctl->id.name));
+				len = append_ctl_name(kctl, " Capture");
 			} else {
-				len = strlcat(kctl->id.name + len, " Playback", sizeof(kctl->id.name));
+				len = append_ctl_name(kctl, " Playback");
 			}
 		}
-		strlcat(kctl->id.name + len, control == USB_FEATURE_MUTE ? " Switch" : " Volume",
-			sizeof(kctl->id.name));
+		append_ctl_name(kctl, control == USB_FEATURE_MUTE ?
+				" Switch" : " Volume");
 		if (control == USB_FEATURE_VOLUME) {
 			kctl->tlv.c = mixer_vol_tlv;
 			kctl->vd[0].access |= 
@@ -1143,7 +1148,7 @@
 		len = get_term_name(state, iterm, kctl->id.name, sizeof(kctl->id.name), 0);
 	if (! len)
 		len = sprintf(kctl->id.name, "Mixer Source %d", in_ch + 1);
-	strlcat(kctl->id.name + len, " Volume", sizeof(kctl->id.name));
+	append_ctl_name(kctl, " Volume");
 
 	snd_printdd(KERN_INFO "[%d] MU [%s] ch = %d, val = %d/%d\n",
 		    cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
@@ -1400,8 +1405,8 @@
 			if (! len)
 				strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
 		}
-		strlcat(kctl->id.name, " ", sizeof(kctl->id.name));
-		strlcat(kctl->id.name, valinfo->suffix, sizeof(kctl->id.name));
+		append_ctl_name(kctl, " ");
+		append_ctl_name(kctl, valinfo->suffix);
 
 		snd_printdd(KERN_INFO "[%d] PU [%s] ch = %d, val = %d/%d\n",
 			    cval->id, kctl->id.name, cval->channels, cval->min, cval->max);
@@ -1610,9 +1615,9 @@
 			strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name));
 
 		if ((state->oterm.type & 0xff00) == 0x0100)
-			strlcat(kctl->id.name, " Capture Source", sizeof(kctl->id.name));
+			append_ctl_name(kctl, " Capture Source");
 		else
-			strlcat(kctl->id.name, " Playback Source", sizeof(kctl->id.name));
+			append_ctl_name(kctl, " Playback Source");
 	}
 
 	snd_printdd(KERN_INFO "[%d] SU [%s] items = %d\n",
diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c
index fd44946..99f3376 100644
--- a/sound/usb/usx2y/us122l.c
+++ b/sound/usb/usx2y/us122l.c
@@ -154,7 +154,7 @@
 	snd_printdd(KERN_DEBUG "%i\n", atomic_read(&us122l->mmap_count));
 }
 
-static struct vm_operations_struct usb_stream_hwdep_vm_ops = {
+static const struct vm_operations_struct usb_stream_hwdep_vm_ops = {
 	.open = usb_stream_hwdep_vm_open,
 	.fault = usb_stream_hwdep_vm_fault,
 	.close = usb_stream_hwdep_vm_close,
diff --git a/sound/usb/usx2y/usX2Yhwdep.c b/sound/usb/usx2y/usX2Yhwdep.c
index f3d8f71..52e04b2 100644
--- a/sound/usb/usx2y/usX2Yhwdep.c
+++ b/sound/usb/usx2y/usX2Yhwdep.c
@@ -53,7 +53,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct us428ctls_vm_ops = {
+static const struct vm_operations_struct us428ctls_vm_ops = {
 	.fault = snd_us428ctls_vm_fault,
 };
 
diff --git a/sound/usb/usx2y/usx2yhwdeppcm.c b/sound/usb/usx2y/usx2yhwdeppcm.c
index 117946f..4b2304c 100644
--- a/sound/usb/usx2y/usx2yhwdeppcm.c
+++ b/sound/usb/usx2y/usx2yhwdeppcm.c
@@ -697,7 +697,7 @@
 }
 
 
-static struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
+static const struct vm_operations_struct snd_usX2Y_hwdep_pcm_vm_ops = {
 	.open = snd_usX2Y_hwdep_pcm_vm_open,
 	.close = snd_usX2Y_hwdep_pcm_vm_close,
 	.fault = snd_usX2Y_hwdep_pcm_vm_fault,
diff --git a/tools/perf/.gitignore b/tools/perf/.gitignore
index d69a759..0854f11 100644
--- a/tools/perf/.gitignore
+++ b/tools/perf/.gitignore
@@ -10,6 +10,7 @@
 perf-top
 perf*.1
 perf*.xml
+perf*.html
 common-cmds.h
 tags
 TAGS
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 16af2d8..e5f6ece 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -338,14 +338,24 @@
 
 static void abs_printout(int counter, double avg)
 {
+	double total, ratio = 0.0;
+
 	fprintf(stderr, " %14.0f  %-24s", avg, event_name(counter));
 
 	if (MATCH_EVENT(HARDWARE, HW_INSTRUCTIONS, counter)) {
-		fprintf(stderr, " # %10.3f IPC  ",
-				avg / avg_stats(&runtime_cycles_stats));
+		total = avg_stats(&runtime_cycles_stats);
+
+		if (total)
+			ratio = avg / total;
+
+		fprintf(stderr, " # %10.3f IPC  ", ratio);
 	} else {
-		fprintf(stderr, " # %10.3f M/sec",
-				1000.0 * avg / avg_stats(&runtime_nsecs_stats));
+		total = avg_stats(&runtime_nsecs_stats);
+
+		if (total)
+			ratio = 1000.0 * avg / total;
+
+		fprintf(stderr, " # %10.3f M/sec", ratio);
 	}
 }
 
diff --git a/tools/perf/util/module.c b/tools/perf/util/module.c
index 3d567fe..0d8c85d 100644
--- a/tools/perf/util/module.c
+++ b/tools/perf/util/module.c
@@ -4,6 +4,7 @@
 #include "module.h"
 
 #include <libelf.h>
+#include <libgen.h>
 #include <gelf.h>
 #include <elf.h>
 #include <dirent.h>
@@ -409,35 +410,40 @@
 static int mod_dso__load_module_paths(struct mod_dso *self)
 {
 	struct utsname uts;
-	int count = 0, len;
+	int count = 0, len, err = -1;
 	char *line = NULL;
 	FILE *file;
-	char *path;
+	char *dpath, *dir;
 	size_t n;
 
 	if (uname(&uts) < 0)
-		goto out_failure;
+		return err;
 
 	len = strlen("/lib/modules/");
 	len += strlen(uts.release);
 	len += strlen("/modules.dep");
 
-	path = calloc(1, len);
-	if (path == NULL)
-		goto out_failure;
+	dpath = calloc(1, len + 1);
+	if (dpath == NULL)
+		return err;
 
-	strcat(path, "/lib/modules/");
-	strcat(path, uts.release);
-	strcat(path, "/modules.dep");
+	strcat(dpath, "/lib/modules/");
+	strcat(dpath, uts.release);
+	strcat(dpath, "/modules.dep");
 
-	file = fopen(path, "r");
-	free(path);
+	file = fopen(dpath, "r");
 	if (file == NULL)
 		goto out_failure;
 
+	dir = dirname(dpath);
+	if (!dir)
+		goto out_failure;
+	strcat(dir, "/");
+
 	while (!feof(file)) {
-		char *name, *tmp;
 		struct module *module;
+		char *name, *path, *tmp;
+		FILE *modfile;
 		int line_len;
 
 		line_len = getline(&line, &n, file);
@@ -445,17 +451,41 @@
 			break;
 
 		if (!line)
-			goto out_failure;
+			break;
 
 		line[--line_len] = '\0'; /* \n */
 
-		path = strtok(line, ":");
+		path = strchr(line, ':');
 		if (!path)
-			goto out_failure;
+			break;
+		*path = '\0';
+
+		path = strdup(line);
+		if (!path)
+			break;
+
+		if (!strstr(path, dir)) {
+			if (strncmp(path, "kernel/", 7))
+				break;
+
+			free(path);
+			path = calloc(1, strlen(dir) + strlen(line) + 1);
+			if (!path)
+				break;
+			strcat(path, dir);
+			strcat(path, line);
+		}
+
+		modfile = fopen(path, "r");
+		if (modfile == NULL)
+			break;
+		fclose(modfile);
 
 		name = strdup(path);
-		name = strtok(name, "/");
+		if (!name)
+			break;
 
+		name = strtok(name, "/");
 		tmp = name;
 
 		while (tmp) {
@@ -463,26 +493,25 @@
 			if (tmp)
 				name = tmp;
 		}
-		name = strsep(&name, ".");
 
-		/* Quirk: replace '-' with '_' in sound modules */
+		name = strsep(&name, ".");
+		if (!name)
+			break;
+
+		/* Quirk: replace '-' with '_' in all modules */
 		for (len = strlen(name); len; len--) {
 			if (*(name+len) == '-')
 				*(name+len) = '_';
 		}
 
 		module = module__new(name, path);
-		if (!module) {
-			fprintf(stderr, "load_module_paths: allocation error\n");
-			goto out_failure;
-		}
+		if (!module)
+			break;
 		mod_dso__insert_module(self, module);
 
 		module->sections = sec_dso__new_dso("sections");
-		if (!module->sections) {
-			fprintf(stderr, "load_module_paths: allocation error\n");
-			goto out_failure;
-		}
+		if (!module->sections)
+			break;
 
 		module->active = mod_dso__load_sections(module);
 
@@ -490,13 +519,20 @@
 			count++;
 	}
 
-	free(line);
-	fclose(file);
-
-	return count;
+	if (feof(file))
+		err = count;
+	else
+		fprintf(stderr, "load_module_paths: modules.dep parsing failure!\n");
 
 out_failure:
-	return -1;
+	if (dpath)
+		free(dpath);
+	if (file)
+		fclose(file);
+	if (line)
+		free(line);
+
+	return err;
 }
 
 int mod_dso__load_modules(struct mod_dso *dso)
diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c
index 13ab4b8..87c424d 100644
--- a/tools/perf/util/parse-events.c
+++ b/tools/perf/util/parse-events.c
@@ -165,33 +165,31 @@
 	DIR *sys_dir, *evt_dir;
 	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
 	char id_buf[4];
-	int sys_dir_fd, fd;
+	int fd;
 	u64 id;
 	char evt_path[MAXPATHLEN];
+	char dir_path[MAXPATHLEN];
 
 	if (valid_debugfs_mount(debugfs_path))
 		return NULL;
 
 	sys_dir = opendir(debugfs_path);
 	if (!sys_dir)
-		goto cleanup;
-	sys_dir_fd = dirfd(sys_dir);
+		return NULL;
 
 	for_each_subsystem(sys_dir, sys_dirent, sys_next) {
-		int dfd = openat(sys_dir_fd, sys_dirent.d_name,
-				 O_RDONLY|O_DIRECTORY), evt_dir_fd;
-		if (dfd == -1)
+
+		snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+			 sys_dirent.d_name);
+		evt_dir = opendir(dir_path);
+		if (!evt_dir)
 			continue;
-		evt_dir = fdopendir(dfd);
-		if (!evt_dir) {
-			close(dfd);
-			continue;
-		}
-		evt_dir_fd = dirfd(evt_dir);
+
 		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
-			snprintf(evt_path, MAXPATHLEN, "%s/id",
+
+			snprintf(evt_path, MAXPATHLEN, "%s/%s/id", dir_path,
 				 evt_dirent.d_name);
-			fd = openat(evt_dir_fd, evt_path, O_RDONLY);
+			fd = open(evt_path, O_RDONLY);
 			if (fd < 0)
 				continue;
 			if (read(fd, id_buf, sizeof(id_buf)) < 0) {
@@ -225,7 +223,6 @@
 		closedir(evt_dir);
 	}
 
-cleanup:
 	closedir(sys_dir);
 	return NULL;
 }
@@ -761,28 +758,24 @@
 {
 	DIR *sys_dir, *evt_dir;
 	struct dirent *sys_next, *evt_next, sys_dirent, evt_dirent;
-	int sys_dir_fd;
 	char evt_path[MAXPATHLEN];
+	char dir_path[MAXPATHLEN];
 
 	if (valid_debugfs_mount(debugfs_path))
 		return;
 
 	sys_dir = opendir(debugfs_path);
 	if (!sys_dir)
-		goto cleanup;
-	sys_dir_fd = dirfd(sys_dir);
+		return;
 
 	for_each_subsystem(sys_dir, sys_dirent, sys_next) {
-		int dfd = openat(sys_dir_fd, sys_dirent.d_name,
-				 O_RDONLY|O_DIRECTORY), evt_dir_fd;
-		if (dfd == -1)
+
+		snprintf(dir_path, MAXPATHLEN, "%s/%s", debugfs_path,
+			 sys_dirent.d_name);
+		evt_dir = opendir(dir_path);
+		if (!evt_dir)
 			continue;
-		evt_dir = fdopendir(dfd);
-		if (!evt_dir) {
-			close(dfd);
-			continue;
-		}
-		evt_dir_fd = dirfd(evt_dir);
+
 		for_each_event(sys_dirent, evt_dir, evt_dirent, evt_next) {
 			snprintf(evt_path, MAXPATHLEN, "%s:%s",
 				 sys_dirent.d_name, evt_dirent.d_name);
@@ -791,8 +784,6 @@
 		}
 		closedir(evt_dir);
 	}
-
-cleanup:
 	closedir(sys_dir);
 }
 
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index fd3d9c8..559fb06 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -833,7 +833,7 @@
 	struct mod_dso *mods = mod_dso__new_dso("modules");
 	struct module *pos;
 	struct rb_node *next;
-	int err;
+	int err, count = 0;
 
 	err = mod_dso__load_modules(mods);
 
@@ -852,14 +852,16 @@
 			break;
 
 		next = rb_next(&pos->rb_node);
+		count += err;
 	}
 
 	if (err < 0) {
 		mod_dso__delete_modules(mods);
 		mod_dso__delete_self(mods);
+		return err;
 	}
 
-	return err;
+	return count;
 }
 
 static inline void dso__fill_symbol_holes(struct dso *self)
@@ -913,8 +915,15 @@
 
 	if (vmlinux) {
 		err = dso__load_vmlinux(self, vmlinux, filter, v);
-		if (err > 0 && use_modules)
-			err = dso__load_modules(self, filter, v);
+		if (err > 0 && use_modules) {
+			int syms = dso__load_modules(self, filter, v);
+
+			if (syms < 0) {
+				fprintf(stderr, "dso__load_modules failed!\n");
+				return syms;
+			}
+			err += syms;
+		}
 	}
 
 	if (err <= 0)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index 034a798..e79c540 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -1713,7 +1713,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct kvm_vcpu_vm_ops = {
+static const struct vm_operations_struct kvm_vcpu_vm_ops = {
 	.fault = kvm_vcpu_fault,
 };
 
@@ -2317,7 +2317,7 @@
 	return 0;
 }
 
-static struct vm_operations_struct kvm_vm_vm_ops = {
+static const struct vm_operations_struct kvm_vm_vm_ops = {
 	.fault = kvm_vm_fault,
 };
 
@@ -2625,7 +2625,7 @@
 
 DEFINE_SIMPLE_ATTRIBUTE(vcpu_stat_fops, vcpu_stat_get, NULL, "%llu\n");
 
-static struct file_operations *stat_fops[] = {
+static const struct file_operations *stat_fops[] = {
 	[KVM_STAT_VCPU] = &vcpu_stat_fops,
 	[KVM_STAT_VM]   = &vm_stat_fops,
 };