diff --git a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
index f03e9153..965ea52 100644
--- a/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
+++ b/arch/x86/kernel/cpu/cpufreq/cpufreq-nforce2.c
@@ -26,9 +26,10 @@
 #define NFORCE2_SAFE_DISTANCE 50
 
 /* Delay in ms between FSB changes */
-//#define NFORCE2_DELAY 10
+/* #define NFORCE2_DELAY 10 */
 
-/* nforce2_chipset:
+/*
+ * nforce2_chipset:
  * FSB is changed using the chipset
  */
 static struct pci_dev *nforce2_chipset_dev;
@@ -36,13 +37,13 @@
 /* fid:
  * multiplier * 10
  */
-static int fid = 0;
+static int fid;
 
 /* min_fsb, max_fsb:
  * minimum and maximum FSB (= FSB at boot time)
  */
-static int min_fsb = 0;
-static int max_fsb = 0;
+static int min_fsb;
+static int max_fsb;
 
 MODULE_AUTHOR("Sebastian Witt <se.witt@gmx.net>");
 MODULE_DESCRIPTION("nForce2 FSB changing cpufreq driver");
@@ -53,7 +54,7 @@
 
 MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
 MODULE_PARM_DESC(min_fsb,
-                 "Minimum FSB to use, if not defined: current FSB - 50");
+		"Minimum FSB to use, if not defined: current FSB - 50");
 
 #define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "cpufreq-nforce2", msg)
 
@@ -139,7 +140,7 @@
 
 	/* Get chipset boot FSB from subdevice 5 (FSB at boot-time) */
 	nforce2_sub5 = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
-						0x01EF,PCI_ANY_ID,PCI_ANY_ID,NULL);
+						0x01EF, PCI_ANY_ID, PCI_ANY_ID, NULL);
 	if (!nforce2_sub5)
 		return 0;
 
@@ -147,13 +148,13 @@
 	fsb /= 1000000;
 
 	/* Check if PLL register is already set */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 
-	if(bootfsb || !temp)
+	if (bootfsb || !temp)
 		return fsb;
-		
+
 	/* Use PLL register FSB value */
-	pci_read_config_dword(nforce2_chipset_dev,NFORCE2_PLLREG, &temp);
+	pci_read_config_dword(nforce2_chipset_dev, NFORCE2_PLLREG, &temp);
 	fsb = nforce2_calc_fsb(temp);
 
 	return fsb;
@@ -184,7 +185,7 @@
 	}
 
 	/* First write? Then set actual value */
-	pci_read_config_byte(nforce2_chipset_dev,NFORCE2_PLLENABLE, (u8 *)&temp);
+	pci_read_config_byte(nforce2_chipset_dev, NFORCE2_PLLENABLE, (u8 *)&temp);
 	if (!temp) {
 		pll = nforce2_calc_pll(tfsb);
 
@@ -210,7 +211,8 @@
 			tfsb--;
 
 		/* Calculate the PLL reg. value */
-		if ((pll = nforce2_calc_pll(tfsb)) == -1)
+		pll = nforce2_calc_pll(tfsb);
+		if (pll == -1)
 			return -EINVAL;
 
 		nforce2_write_pll(pll);
@@ -249,7 +251,7 @@
 static int nforce2_target(struct cpufreq_policy *policy,
 			  unsigned int target_freq, unsigned int relation)
 {
-//        unsigned long         flags;
+/*        unsigned long         flags; */
 	struct cpufreq_freqs freqs;
 	unsigned int target_fsb;
 
@@ -271,17 +273,17 @@
 	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* Disable IRQs */
-	//local_irq_save(flags);
+	/* local_irq_save(flags); */
 
 	if (nforce2_set_fsb(target_fsb) < 0)
 		printk(KERN_ERR "cpufreq: Changing FSB to %d failed\n",
-                       target_fsb);
+			target_fsb);
 	else
 		dprintk("Changed FSB successfully to %d\n",
-                       target_fsb);
+			target_fsb);
 
 	/* Enable IRQs */
-	//local_irq_restore(flags);
+	/* local_irq_restore(flags); */
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
@@ -302,8 +304,8 @@
 		policy->max = (fsb_pol_max + 1) * fid * 100;
 
 	cpufreq_verify_within_limits(policy,
-                                     policy->cpuinfo.min_freq,
-                                     policy->cpuinfo.max_freq);
+				     policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
 	return 0;
 }
 
@@ -347,7 +349,7 @@
 	/* Set maximum FSB to FSB at boot time */
 	max_fsb = nforce2_fsb_read(1);
 
-	if(!max_fsb)
+	if (!max_fsb)
 		return -EIO;
 
 	if (!min_fsb)