blob: d748527d7a38a98737a1f3e4d70e1cbda048a921 [file] [log] [blame]
/*
* intel_soc_dts_thermal.c
* Copyright (c) 2014, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include "intel_soc_dts_iosf.h"
#define CRITICAL_OFFSET_FROM_TJ_MAX 5000
static int crit_offset = CRITICAL_OFFSET_FROM_TJ_MAX;
module_param(crit_offset, int, 0644);
MODULE_PARM_DESC(crit_offset,
"Critical Temperature offset from tj max in millidegree Celsius.");
/* IRQ 86 is a fixed APIC interrupt for BYT DTS Aux threshold notifications */
#define BYT_SOC_DTS_APIC_IRQ 86
static int soc_dts_thres_gsi;
static int soc_dts_thres_irq;
static struct intel_soc_dts_sensors *soc_dts;
static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data)
{
pr_debug("proc_thermal_interrupt\n");
intel_soc_dts_iosf_interrupt_handler(soc_dts);
return IRQ_HANDLED;
}
static const struct x86_cpu_id soc_thermal_ids[] = {
{ X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, 0,
BYT_SOC_DTS_APIC_IRQ},
{}
};
MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids);
static int __init intel_soc_thermal_init(void)
{
int err = 0;
const struct x86_cpu_id *match_cpu;
match_cpu = x86_match_cpu(soc_thermal_ids);
if (!match_cpu)
return -ENODEV;
/* Create a zone with 2 trips with marked as read only */
soc_dts = intel_soc_dts_iosf_init(INTEL_SOC_DTS_INTERRUPT_APIC, 2, 1);
if (IS_ERR(soc_dts)) {
err = PTR_ERR(soc_dts);
return err;
}
soc_dts_thres_gsi = (int)match_cpu->driver_data;
if (soc_dts_thres_gsi) {
/*
* Note the flags here MUST match the firmware defaults, rather
* then the request_irq flags, otherwise we get an EBUSY error.
*/
soc_dts_thres_irq = acpi_register_gsi(NULL, soc_dts_thres_gsi,
ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
if (soc_dts_thres_irq < 0) {
pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n",
soc_dts_thres_gsi, soc_dts_thres_irq);
soc_dts_thres_irq = 0;
}
}
if (soc_dts_thres_irq) {
err = request_threaded_irq(soc_dts_thres_irq, NULL,
soc_irq_thread_fn,
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
"soc_dts", soc_dts);
if (err) {
/*
* Do not just error out because the user space thermal
* daemon such as DPTF may use polling instead of being
* interrupt driven.
*/
pr_warn("request_threaded_irq ret %d\n", err);
}
}
err = intel_soc_dts_iosf_add_read_only_critical_trip(soc_dts,
crit_offset);
if (err)
goto error_trips;
return 0;
error_trips:
if (soc_dts_thres_irq) {
free_irq(soc_dts_thres_irq, soc_dts);
acpi_unregister_gsi(soc_dts_thres_gsi);
}
intel_soc_dts_iosf_exit(soc_dts);
return err;
}
static void __exit intel_soc_thermal_exit(void)
{
if (soc_dts_thres_irq) {
free_irq(soc_dts_thres_irq, soc_dts);
acpi_unregister_gsi(soc_dts_thres_gsi);
}
intel_soc_dts_iosf_exit(soc_dts);
}
module_init(intel_soc_thermal_init)
module_exit(intel_soc_thermal_exit)
MODULE_DESCRIPTION("Intel SoC DTS Thermal Driver");
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
MODULE_LICENSE("GPL v2");