diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt
index 2f0ddc1..9c647bd 100644
--- a/Documentation/power/power_supply_class.txt
+++ b/Documentation/power/power_supply_class.txt
@@ -81,6 +81,9 @@
 are already charged or discharging, 'n/a' can be displayed (or
 'unknown', if the status is not known).
 
+AUTHENTIC - indicates the power supply (battery or charger) connected
+to the platform is authentic(1) or non authentic(0).
+
 HEALTH - represents health of the battery, values corresponds to
 POWER_SUPPLY_HEALTH_*, defined in battery.h.
 
@@ -113,8 +116,12 @@
 relative, time-based measurements.
 
 CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger.
+CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the
+power supply object.
 
 CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger.
+CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the
+power supply object.
 
 ENERGY_FULL, ENERGY_EMPTY - same as above but for energy.
 
diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c
index b73f033..2abd607 100644
--- a/drivers/mfd/88pm860x-core.c
+++ b/drivers/mfd/88pm860x-core.c
@@ -18,6 +18,7 @@
 #include <linux/mfd/core.h>
 #include <linux/mfd/88pm860x.h>
 #include <linux/regulator/machine.h>
+#include <linux/power/charger-manager.h>
 
 #define INT_STATUS_NUM			3
 
@@ -84,7 +85,8 @@
 static struct resource charger_resources[] __devinitdata = {
 	{PM8607_IRQ_CHG,  PM8607_IRQ_CHG,  "charger detect",  IORESOURCE_IRQ,},
 	{PM8607_IRQ_CHG_DONE,  PM8607_IRQ_CHG_DONE,  "charging done",       IORESOURCE_IRQ,},
-	{PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging timeout",    IORESOURCE_IRQ,},
+	{PM8607_IRQ_CHG_FAIL,  PM8607_IRQ_CHG_FAIL,  "charging timeout",    IORESOURCE_IRQ,},
+	{PM8607_IRQ_CHG_FAULT, PM8607_IRQ_CHG_FAULT, "charging fault",	    IORESOURCE_IRQ,},
 	{PM8607_IRQ_GPADC1,    PM8607_IRQ_GPADC1,    "battery temperature", IORESOURCE_IRQ,},
 	{PM8607_IRQ_VBAT, PM8607_IRQ_VBAT, "battery voltage", IORESOURCE_IRQ,},
 	{PM8607_IRQ_VCHG, PM8607_IRQ_VCHG, "vchg voltage",    IORESOURCE_IRQ,},
@@ -155,10 +157,15 @@
 	.consumer_supplies	= &preg_supply[0],
 };
 
+static struct charger_regulator chg_desc_regulator_data[] = {
+	{ .regulator_name = "preg", },
+};
+
 static struct mfd_cell power_devs[] = {
 	{"88pm860x-battery", -1,},
 	{"88pm860x-charger", -1,},
 	{"88pm860x-preg",    -1,},
+	{"charger-manager", -1,},
 };
 
 static struct mfd_cell rtc_devs[] = {
@@ -791,6 +798,19 @@
 			      &preg_resources[0], chip->irq_base, NULL);
 	if (ret < 0)
 		dev_err(chip->dev, "Failed to add preg subdev\n");
+
+	if (pdata->chg_desc) {
+		pdata->chg_desc->charger_regulators =
+			&chg_desc_regulator_data[0];
+		pdata->chg_desc->num_charger_regulators	=
+			ARRAY_SIZE(chg_desc_regulator_data),
+		power_devs[3].platform_data = pdata->chg_desc;
+		power_devs[3].pdata_size = sizeof(*pdata->chg_desc);
+		ret = mfd_add_devices(chip->dev, 0, &power_devs[3], 1,
+				      NULL, chip->irq_base, NULL);
+		if (ret < 0)
+			dev_err(chip->dev, "Failed to add chg-manager subdev\n");
+	}
 }
 
 static void __devinit device_onkey_init(struct pm860x_chip *chip,
diff --git a/drivers/power/88pm860x_battery.c b/drivers/power/88pm860x_battery.c
new file mode 100644
index 0000000..beed5ecf
--- /dev/null
+++ b/drivers/power/88pm860x_battery.c
@@ -0,0 +1,1041 @@
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG			(1 << 2)
+#define STATUS2_BAT			(1 << 3)
+#define STATUS2_VBUS			(1 << 4)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_TINT			(1 << 3)
+#define MEAS1_GP1			(1 << 5)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT			(1 << 0)
+#define MEAS3_BAT_DET			(1 << 1)
+#define MEAS3_CC			(1 << 2)
+
+/* bit definitions of Measurement Off Time Register */
+#define MEAS_OFF_SLEEP_EN		(1 << 1)
+
+/* bit definitions of GPADC Bias Current 2 Register */
+#define GPBIAS2_GPADC1_SET		(2 << 4)
+/* GPADC1 Bias Current value in uA unit */
+#define GPBIAS2_GPADC1_UA		((GPBIAS2_GPADC1_SET >> 4) * 5 + 1)
+
+/* bit definitions of GPADC Misc 1 Register */
+#define GPMISC1_GPADC_EN		(1 << 0)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_DET_GPADC1		1
+
+/* bit definitions of Coulomb Counter Reading Register */
+#define CCNT_AVG_SEL			(4 << 3)
+
+/* bit definitions of RTC miscellaneous Register1 */
+#define RTC_SOC_5LSB		(0x1F << 3)
+
+/* bit definitions of RTC Register1 */
+#define RTC_SOC_3MSB		(0x7)
+
+/* bit definitions of Power up Log register */
+#define BAT_WU_LOG			(1<<6)
+
+/* coulomb counter index */
+#define CCNT_POS1			0
+#define CCNT_POS2			1
+#define CCNT_NEG1			2
+#define CCNT_NEG2			3
+#define CCNT_SPOS			4
+#define CCNT_SNEG			5
+
+/* OCV -- Open Circuit Voltage */
+#define OCV_MODE_ACTIVE			0
+#define OCV_MODE_SLEEP			1
+
+/* Vbat range of CC for measuring Rbat */
+#define LOW_BAT_THRESHOLD		3600
+#define VBATT_RESISTOR_MIN		3800
+#define VBATT_RESISTOR_MAX		4100
+
+/* TBAT for batt, TINT for chip itself */
+#define PM860X_TEMP_TINT		(0)
+#define PM860X_TEMP_TBAT		(1)
+
+/*
+ * Battery temperature based on NTC resistor, defined
+ * corresponding resistor value  -- Ohm / C degeree.
+ */
+#define TBAT_NEG_25D		127773	/* -25 */
+#define TBAT_NEG_10D		54564	/* -10 */
+#define TBAT_0D			32330	/* 0 */
+#define TBAT_10D		19785	/* 10 */
+#define TBAT_20D		12468	/* 20 */
+#define TBAT_30D		8072	/* 30 */
+#define TBAT_40D		5356	/* 40 */
+
+struct pm860x_battery_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct device *dev;
+
+	struct power_supply battery;
+	struct mutex lock;
+	int status;
+	int irq_cc;
+	int irq_batt;
+	int max_capacity;
+	int resistor;		/* Battery Internal Resistor */
+	int last_capacity;
+	int start_soc;
+	unsigned present:1;
+	unsigned temp_type:1;	/* TINT or TBAT */
+};
+
+struct ccnt {
+	unsigned long long int pos;
+	unsigned long long int neg;
+	unsigned int spos;
+	unsigned int sneg;
+
+	int total_chg;		/* mAh(3.6C) */
+	int total_dischg;	/* mAh(3.6C) */
+};
+
+/*
+ * State of Charge.
+ * The first number is mAh(=3.6C), and the second number is percent point.
+ */
+static int array_soc[][2] = {
+	{4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96},
+	{4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91},
+	{4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86},
+	{4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81},
+	{3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76},
+	{3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71},
+	{3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66},
+	{3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61},
+	{3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56},
+	{3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51},
+	{3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46},
+	{3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41},
+	{3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36},
+	{3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31},
+	{3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26},
+	{3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21},
+	{3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16},
+	{3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11},
+	{3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6},
+	{3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1},
+};
+
+static struct ccnt ccnt_data;
+
+/*
+ * register 1 bit[7:0] -- bit[11:4] of measured value of voltage
+ * register 0 bit[3:0] -- bit[3:0] of measured value of voltage
+ */
+static int measure_12bit_voltage(struct pm860x_battery_info *info,
+				 int offset, int *data)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, offset, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 25) >> 9;
+	return 0;
+}
+
+static int measure_vbatt(struct pm860x_battery_info *info, int state,
+			 int *data)
+{
+	unsigned char buf[5];
+	int ret;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data);
+		if (ret)
+			return ret;
+		/* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */
+		*data *= 3;
+		break;
+	case OCV_MODE_SLEEP:
+		/*
+		 * voltage value of VBATT in sleep mode is saved in different
+		 * registers.
+		 * bit[11:10] -- bit[7:6] of LDO9(0x18)
+		 * bit[9:8] -- bit[7:6] of LDO8(0x17)
+		 * bit[7:6] -- bit[7:6] of LDO7(0x16)
+		 * bit[5:4] -- bit[7:6] of LDO6(0x15)
+		 * bit[3:0] -- bit[7:4] of LDO5(0x14)
+		 */
+		ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf);
+		if (ret < 0)
+			return ret;
+		ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8)
+		    | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4)
+		    | (buf[0] >> 4);
+		/* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */
+		*data = ((*data & 0xff) * 27 * 25) >> 9;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/*
+ * Return value is signed data.
+ * Negative value means discharging, and positive value means charging.
+ */
+static int measure_current(struct pm860x_battery_info *info, int *data)
+{
+	unsigned char buf[2];
+	short s;
+	int ret;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	/* current(mA) = value * 0.125 */
+	*data = s >> 3;
+	return 0;
+}
+
+static int set_charger_current(struct pm860x_battery_info *info, int data,
+			       int *old)
+{
+	int ret;
+
+	if (data < 50 || data > 1600 || !old)
+		return -EINVAL;
+
+	data = ((data - 50) / 50) & 0x1f;
+	*old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2);
+	*old = (*old & 0x1f) * 50 + 50;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int read_ccnt(struct pm860x_battery_info *info, int offset,
+		     int *ccnt)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf);
+	if (ret < 0)
+		goto out;
+	*ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+	return 0;
+out:
+	return ret;
+}
+
+static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	unsigned int sum;
+	int ret;
+	int data;
+
+	ret = read_ccnt(info, CCNT_POS1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_POS2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	ccnt->pos += sum;
+
+	ret = read_ccnt(info, CCNT_NEG1, &data);
+	if (ret)
+		goto out;
+	sum = data & 0xffff;
+	ret = read_ccnt(info, CCNT_NEG2, &data);
+	if (ret)
+		goto out;
+	sum |= (data & 0xffff) << 16;
+	sum = ~sum + 1;		/* since it's negative */
+	ccnt->neg += sum;
+
+	ret = read_ccnt(info, CCNT_SPOS, &data);
+	if (ret)
+		goto out;
+	ccnt->spos += data;
+	ret = read_ccnt(info, CCNT_SNEG, &data);
+	if (ret)
+		goto out;
+
+	/*
+	 * charge(mAh)  = count * 1.6984 * 1e(-8)
+	 *              = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40)
+	 *              = count * 18236 / (2 ^ 40)
+	 */
+	ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40);
+	ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40);
+	return 0;
+out:
+	return ret;
+}
+
+static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+	int data;
+
+	memset(ccnt, 0, sizeof(*ccnt));
+	/* read to clear ccnt */
+	read_ccnt(info, CCNT_POS1, &data);
+	read_ccnt(info, CCNT_POS2, &data);
+	read_ccnt(info, CCNT_NEG1, &data);
+	read_ccnt(info, CCNT_NEG2, &data);
+	read_ccnt(info, CCNT_SPOS, &data);
+	read_ccnt(info, CCNT_SNEG, &data);
+	return 0;
+}
+
+/* Calculate Open Circuit Voltage */
+static int calc_ocv(struct pm860x_battery_info *info, int *ocv)
+{
+	int ret;
+	int i;
+	int data;
+	int vbatt_avg;
+	int vbatt_sum;
+	int ibatt_avg;
+	int ibatt_sum;
+
+	if (!ocv)
+		return -EINVAL;
+
+	for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		vbatt_sum += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out;
+		ibatt_sum += data;
+	}
+	vbatt_avg = vbatt_sum / 10;
+	ibatt_avg = ibatt_sum / 10;
+
+	mutex_lock(&info->lock);
+	if (info->present)
+		*ocv = vbatt_avg - ibatt_avg * info->resistor / 1000;
+	else
+		*ocv = vbatt_avg;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv);
+	return 0;
+out:
+	return ret;
+}
+
+/* Calculate State of Charge (percent points) */
+static int calc_soc(struct pm860x_battery_info *info, int state, int *soc)
+{
+	int i;
+	int ocv;
+	int count;
+	int ret = -EINVAL;
+
+	if (!soc)
+		return -EINVAL;
+
+	switch (state) {
+	case OCV_MODE_ACTIVE:
+		ret = calc_ocv(info, &ocv);
+		break;
+	case OCV_MODE_SLEEP:
+		ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv);
+		break;
+	}
+	if (ret)
+		return ret;
+
+	count = ARRAY_SIZE(array_soc);
+	if (ocv < array_soc[count - 1][0]) {
+		*soc = 0;
+		return 0;
+	}
+
+	for (i = 0; i < count; i++) {
+		if (ocv >= array_soc[i][0]) {
+			*soc = array_soc[i][1];
+			break;
+		}
+	}
+	return 0;
+}
+
+static irqreturn_t pm860x_coulomb_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+
+	calc_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_batt_handler(int irq, void *data)
+{
+	struct pm860x_battery_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+	/* clear ccnt since battery is attached or dettached */
+	clear_ccnt(info, &ccnt_data);
+	return IRQ_HANDLED;
+}
+
+static void pm860x_init_battery(struct pm860x_battery_info *info)
+{
+	unsigned char buf[2];
+	int ret;
+	int data;
+	int bat_remove;
+	int soc;
+
+	/* measure enable on GPADC1 */
+	data = MEAS1_GP1;
+	if (info->temp_type == PM860X_TEMP_TINT)
+		data |= MEAS1_TINT;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data);
+	if (ret)
+		goto out;
+
+	/* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */
+	data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC;
+	ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data);
+	if (ret)
+		goto out;
+
+	/* measure disable CC in sleep time  */
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82);
+	if (ret)
+		goto out;
+	ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c);
+	if (ret)
+		goto out;
+
+	/* enable GPADC */
+	ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1,
+			    GPMISC1_GPADC_EN, GPMISC1_GPADC_EN);
+	if (ret < 0)
+		goto out;
+
+	/* detect battery via GPADC1 */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			    CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1);
+	if (ret < 0)
+		goto out;
+
+	ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3,
+			      CCNT_AVG_SEL);
+	if (ret < 0)
+		goto out;
+
+	/* set GPADC1 bias */
+	ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4,
+			      GPBIAS2_GPADC1_SET);
+	if (ret < 0)
+		goto out;
+
+	/* check whether battery present) */
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_BAT) {
+		info->present = 1;
+		info->temp_type = PM860X_TEMP_TBAT;
+	} else {
+		info->present = 0;
+		info->temp_type = PM860X_TEMP_TINT;
+	}
+	mutex_unlock(&info->lock);
+
+	calc_soc(info, OCV_MODE_ACTIVE, &soc);
+
+	data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
+	bat_remove = data & BAT_WU_LOG;
+
+	dev_dbg(info->dev, "battery wake up? %s\n",
+		bat_remove != 0 ? "yes" : "no");
+
+	/* restore SOC from RTC domain register */
+	if (bat_remove == 0) {
+		buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2);
+		buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1);
+		data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F);
+		if (data > soc + 15)
+			info->start_soc = soc;
+		else if (data < soc - 15)
+			info->start_soc = soc;
+		else
+			info->start_soc = data;
+		dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc);
+	} else {
+		pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG,
+				BAT_WU_LOG, BAT_WU_LOG);
+		info->start_soc = soc;
+	}
+	info->last_capacity = info->start_soc;
+	dev_dbg(info->dev, "init soc : %d\n", info->last_capacity);
+out:
+	return;
+}
+
+static void set_temp_threshold(struct pm860x_battery_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data);
+	dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 8) / 1800;
+	pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data);
+	dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data);
+}
+
+static int measure_temp(struct pm860x_battery_info *info, int *data)
+{
+	int ret;
+	int temp;
+	int min;
+	int max;
+
+	if (info->temp_type == PM860X_TEMP_TINT) {
+		ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data);
+		if (ret)
+			return ret;
+		*data = (*data - 884) * 1000 / 3611;
+	} else {
+		ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data);
+		if (ret)
+			return ret;
+		/* meausered Vtbat(mV) / Ibias_current(11uA)*/
+		*data = (*data * 1000) / GPBIAS2_GPADC1_UA;
+
+		if (*data > TBAT_NEG_25D) {
+			temp = -30;	/* over cold , suppose -30 roughly */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_NEG_10D) {
+			temp = -15;	/* -15 degree, code */
+			max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, 0, max);
+		} else if (*data > TBAT_0D) {
+			temp = -5;	/* -5 degree */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_10D) {
+			temp = 5;	/* in range of (0, 10) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_20D) {
+			temp = 15;	/* in range of (10, 20) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_30D) {
+			temp = 25;	/* in range of (20, 30) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else if (*data > TBAT_40D) {
+			temp = 35;	/* in range of (30, 40) */
+			min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+			max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, max);
+		} else {
+			min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+			set_temp_threshold(info, min, 0);
+			temp = 45;	/* over heat ,suppose 45 roughly */
+		}
+
+		dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data);
+		*data = temp;
+	}
+	return 0;
+}
+
+static int calc_resistor(struct pm860x_battery_info *info)
+{
+	int vbatt_sum1;
+	int vbatt_sum2;
+	int chg_current;
+	int ibatt_sum1;
+	int ibatt_sum2;
+	int data;
+	int ret;
+	int i;
+
+	ret = measure_current(info, &data);
+	/* make sure that charging is launched by data > 0 */
+	if (ret || data < 0)
+		goto out;
+
+	ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+	if (ret)
+		goto out;
+	/* calculate resistor only in CC charge mode */
+	if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX)
+		goto out;
+
+	/* current is saved */
+	if (set_charger_current(info, 500, &chg_current))
+		goto out;
+
+	/*
+	 * set charge current as 500mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum1 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum1 = ibatt_sum1 - data;	/* discharging */
+		else
+			ibatt_sum1 = ibatt_sum1 + data;	/* charging */
+	}
+
+	if (set_charger_current(info, 100, &ret))
+		goto out_meas;
+	/*
+	 * set charge current as 100mA, wait about 500ms till charging
+	 * process is launched and stable with the newer charging current.
+	 */
+	msleep(500);
+
+	for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) {
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out_meas;
+		vbatt_sum2 += data;
+		ret = measure_current(info, &data);
+		if (ret)
+			goto out_meas;
+
+		if (data < 0)
+			ibatt_sum2 = ibatt_sum2 - data;	/* discharging */
+		else
+			ibatt_sum2 = ibatt_sum2 + data;	/* charging */
+	}
+
+	/* restore current setting */
+	if (set_charger_current(info, chg_current, &ret))
+		goto out_meas;
+
+	if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) &&
+			(ibatt_sum2 > 0)) {
+		/* calculate resistor in discharging case */
+		data = 1000 * (vbatt_sum1 - vbatt_sum2)
+		    / (ibatt_sum1 - ibatt_sum2);
+		if ((data - info->resistor > 0) &&
+				(data - info->resistor < info->resistor))
+			info->resistor = data;
+		if ((info->resistor - data > 0) &&
+				(info->resistor - data < data))
+			info->resistor = data;
+	}
+	return 0;
+
+out_meas:
+	set_charger_current(info, chg_current, &ret);
+out:
+	return -EINVAL;
+}
+
+static int calc_capacity(struct pm860x_battery_info *info, int *cap)
+{
+	int ret;
+	int data;
+	int ibat;
+	int cap_ocv = 0;
+	int cap_cc = 0;
+
+	ret = calc_ccnt(info, &ccnt_data);
+	if (ret)
+		goto out;
+soc:
+	data = info->max_capacity * info->start_soc / 100;
+	if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) {
+		cap_cc =
+		    data + ccnt_data.total_chg - ccnt_data.total_dischg;
+	} else {
+		clear_ccnt(info, &ccnt_data);
+		calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc);
+		dev_dbg(info->dev, "restart soc = %d !\n",
+			info->start_soc);
+		goto soc;
+	}
+
+	cap_cc = cap_cc * 100 / info->max_capacity;
+	if (cap_cc < 0)
+		cap_cc = 0;
+	else if (cap_cc > 100)
+		cap_cc = 100;
+
+	dev_dbg(info->dev, "%s, last cap : %d", __func__,
+		info->last_capacity);
+
+	ret = measure_current(info, &ibat);
+	if (ret)
+		goto out;
+	/* Calculate the capacity when discharging(ibat < 0) */
+	if (ibat < 0) {
+		ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv);
+		if (ret)
+			cap_ocv = info->last_capacity;
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			goto out;
+		if (data <= LOW_BAT_THRESHOLD) {
+			/* choose the lower capacity value to report
+			 * between vbat and CC when vbat < 3.6v;
+			 * than 3.6v;
+			 */
+			*cap = min(cap_ocv, cap_cc);
+		} else {
+			/* when detect vbat > 3.6v, but cap_cc < 15,and
+			 * cap_ocv is 10% larger than cap_cc, we can think
+			 * CC have some accumulation error, switch to OCV
+			 * to estimate capacity;
+			 * */
+			if (cap_cc < 15 && cap_ocv - cap_cc > 10)
+				*cap = cap_ocv;
+			else
+				*cap = cap_cc;
+		}
+		/* when discharging, make sure current capacity
+		 * is lower than last*/
+		if (*cap > info->last_capacity)
+			*cap = info->last_capacity;
+	} else {
+		*cap = cap_cc;
+	}
+	info->last_capacity = *cap;
+
+	dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n",
+		(ibat < 0) ? "discharging" : "charging",
+		 cap_ocv, cap_cc, *cap);
+	/*
+	 * store the current capacity to RTC domain register,
+	 * after next power up , it will be restored.
+	 */
+	pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB,
+			(*cap & 0x1F) << 3);
+	pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB,
+			((*cap >> 5) & 0x3));
+	return 0;
+out:
+	return ret;
+}
+
+static void pm860x_external_power_changed(struct power_supply *psy)
+{
+	struct pm860x_battery_info *info;
+
+	info = container_of(psy, struct pm860x_battery_info, battery);
+	calc_resistor(info);
+}
+
+static int pm860x_batt_get_prop(struct power_supply *psy,
+				enum power_supply_property psp,
+				union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent);
+	int data;
+	int ret;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = info->present;
+		break;
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = calc_capacity(info, &data);
+		if (ret)
+			return ret;
+		if (data < 0)
+			data = 0;
+		else if (data > 100)
+			data = 100;
+		/* return 100 if battery is not attached */
+		if (!info->present)
+			data = 100;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TECHNOLOGY:
+		val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		/* return real vbatt Voltage */
+		ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/* return Open Circuit Voltage (not measured voltage) */
+		ret = calc_ocv(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = measure_current(info, &data);
+		if (ret)
+			return ret;
+		val->intval = data;
+		break;
+	case POWER_SUPPLY_PROP_TEMP:
+		if (info->present) {
+			ret = measure_temp(info, &data);
+			if (ret)
+				return ret;
+			data *= 10;
+		} else {
+			/* Fake Temp 25C Without Battery */
+			data = 250;
+		}
+		val->intval = data;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static int pm860x_batt_set_prop(struct power_supply *psy,
+				       enum power_supply_property psp,
+				       const union power_supply_propval *val)
+{
+	struct pm860x_battery_info *info = dev_get_drvdata(psy->dev->parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_CHARGE_FULL:
+		clear_ccnt(info, &ccnt_data);
+		info->start_soc = 100;
+		dev_dbg(info->dev, "chg done, update soc = %d\n",
+			info->start_soc);
+		break;
+	default:
+		return -EPERM;
+	}
+
+	return 0;
+}
+
+
+static enum power_supply_property pm860x_batt_props[] = {
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_TECHNOLOGY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static __devinit int pm860x_battery_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_battery_info *info;
+	struct pm860x_power_pdata *pdata;
+	int ret;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->irq_cc = platform_get_irq(pdev, 0);
+	if (info->irq_cc <= 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->irq_batt = platform_get_irq(pdev, 1);
+	if (info->irq_batt <= 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->dev = &pdev->dev;
+	info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+	pdata = pdev->dev.platform_data;
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	pm860x_init_battery(info);
+
+	info->battery.name = "battery-monitor";
+	info->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+	info->battery.properties = pm860x_batt_props;
+	info->battery.num_properties = ARRAY_SIZE(pm860x_batt_props);
+	info->battery.get_property = pm860x_batt_get_prop;
+	info->battery.set_property = pm860x_batt_set_prop;
+	info->battery.external_power_changed = pm860x_external_power_changed;
+
+	if (pdata && pdata->max_capacity)
+		info->max_capacity = pdata->max_capacity;
+	else
+		info->max_capacity = 1500;	/* set default capacity */
+	if (pdata && pdata->resistor)
+		info->resistor = pdata->resistor;
+	else
+		info->resistor = 300;	/* set default internal resistor */
+
+	ret = power_supply_register(&pdev->dev, &info->battery);
+	if (ret)
+		goto out;
+	info->battery.dev->parent = &pdev->dev;
+
+	ret = request_threaded_irq(info->irq_cc, NULL,
+				pm860x_coulomb_handler, IRQF_ONESHOT,
+				"coulomb", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_cc, ret);
+		goto out_reg;
+	}
+
+	ret = request_threaded_irq(info->irq_batt, NULL, pm860x_batt_handler,
+				IRQF_ONESHOT, "battery", info);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+			info->irq_batt, ret);
+		goto out_coulomb;
+	}
+
+
+	return 0;
+
+out_coulomb:
+	free_irq(info->irq_cc, info);
+out_reg:
+	power_supply_unregister(&info->battery);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit pm860x_battery_remove(struct platform_device *pdev)
+{
+	struct pm860x_battery_info *info = platform_get_drvdata(pdev);
+
+	power_supply_unregister(&info->battery);
+	free_irq(info->irq_batt, info);
+	free_irq(info->irq_cc, info);
+	kfree(info);
+	platform_set_drvdata(pdev, NULL);
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_battery_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag |= 1 << PM8607_IRQ_CC;
+	return 0;
+}
+
+static int pm860x_battery_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+	if (device_may_wakeup(dev))
+		chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC);
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops,
+			pm860x_battery_suspend, pm860x_battery_resume);
+
+static struct platform_driver pm860x_battery_driver = {
+	.driver = {
+		   .name = "88pm860x-battery",
+		   .owner = THIS_MODULE,
+		   .pm = &pm860x_battery_pm_ops,
+	},
+	.probe = pm860x_battery_probe,
+	.remove = __devexit_p(pm860x_battery_remove),
+};
+module_platform_driver(pm860x_battery_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c
new file mode 100644
index 0000000..2dbeb14
--- /dev/null
+++ b/drivers/power/88pm860x_charger.c
@@ -0,0 +1,746 @@
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG		(1 << 2)
+
+/* bit definitions of Reset Out Register */
+#define RESET_SW_PD		(1 << 7)
+
+/* bit definitions of PreReg 1 */
+#define PREREG1_90MA		(0x0)
+#define PREREG1_180MA		(0x1)
+#define PREREG1_450MA		(0x4)
+#define PREREG1_540MA		(0x5)
+#define PREREG1_1350MA		(0xE)
+#define PREREG1_VSYS_4_5V	(3 << 4)
+
+/* bit definitions of Charger Control 1 Register */
+#define CC1_MODE_OFF		(0)
+#define CC1_MODE_PRECHARGE	(1)
+#define CC1_MODE_FASTCHARGE	(2)
+#define CC1_MODE_PULSECHARGE	(3)
+#define CC1_ITERM_20MA		(0 << 2)
+#define CC1_ITERM_60MA		(2 << 2)
+#define CC1_VFCHG_4_2V		(9 << 4)
+
+/* bit definitions of Charger Control 2 Register */
+#define CC2_ICHG_100MA		(0x1)
+#define CC2_ICHG_500MA		(0x9)
+#define CC2_ICHG_1000MA		(0x13)
+
+/* bit definitions of Charger Control 3 Register */
+#define CC3_180MIN_TIMEOUT	(0x6 << 4)
+#define CC3_270MIN_TIMEOUT	(0x7 << 4)
+#define CC3_360MIN_TIMEOUT	(0xA << 4)
+#define CC3_DISABLE_TIMEOUT	(0xF << 4)
+
+/* bit definitions of Charger Control 4 Register */
+#define CC4_IPRE_40MA		(7)
+#define CC4_VPCHG_3_2V		(3 << 4)
+#define CC4_IFCHG_MON_EN	(1 << 6)
+#define CC4_BTEMP_MON_EN	(1 << 7)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_OV_EN		(1 << 2)
+#define CC6_BAT_UV_EN		(1 << 3)
+#define CC6_UV_VBAT_SET		(0x3 << 6)	/* 2.8v */
+
+/* bit definitions of Charger Control 7 Register */
+#define CC7_BAT_REM_EN		(1 << 3)
+#define CC7_IFSM_EN		(1 << 7)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_VBAT		(1 << 0)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT_EN		(1 << 0)
+#define MEAS3_CC_EN		(1 << 2)
+
+#define FSM_INIT		0
+#define FSM_DISCHARGE		1
+#define FSM_PRECHARGE		2
+#define FSM_FASTCHARGE		3
+
+#define PRECHARGE_THRESHOLD	3100
+#define POWEROFF_THRESHOLD	3400
+#define CHARGE_THRESHOLD	4000
+#define DISCHARGE_THRESHOLD	4180
+
+/* over-temperature on PM8606 setting */
+#define OVER_TEMP_FLAG		(1 << 6)
+#define OVTEMP_AUTORECOVER	(1 << 3)
+
+/* over-voltage protect on vchg setting mv */
+#define VCHG_NORMAL_LOW		4200
+#define VCHG_NORMAL_CHECK	5800
+#define VCHG_NORMAL_HIGH	6000
+#define VCHG_OVP_LOW		5500
+
+struct pm860x_charger_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct i2c_client *i2c_8606;
+	struct device *dev;
+
+	struct power_supply usb;
+	struct mutex lock;
+	int irq_nums;
+	int irq[7];
+	unsigned state:3;	/* fsm state */
+	unsigned online:1;	/* usb charger */
+	unsigned present:1;	/* battery present */
+	unsigned allowed:1;
+};
+
+static char *pm860x_supplied_to[] = {
+	"battery-monitor",
+};
+
+static int measure_vchg(struct pm860x_charger_info *info, int *data)
+{
+	unsigned char buf[2];
+	int ret = 0;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 125) >> 9;
+
+	dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);
+
+	return ret;
+}
+
+static void set_vchg_threshold(struct pm860x_charger_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * / 5 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
+	dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
+	dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);
+
+}
+
+static void set_vbatt_threshold(struct pm860x_charger_info *info,
+				int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * 3 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
+	dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
+	dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);
+
+	return;
+}
+
+static int start_precharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Pre-charging!\n");
+	set_vbatt_threshold(info, 0, 0);
+
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_1350MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	/* stop charging */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_OFF);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set precharge current, termination voltage, IBAT & TBAT monitor */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
+			       CC4_IPRE_40MA | CC4_VPCHG_3_2V |
+			       CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* trigger precharge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_PRECHARGE);
+out:
+	return ret;
+}
+
+static int start_fastcharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Fast-charging!\n");
+
+	/* set fastcharge termination current & voltage, disable charging */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
+			       CC1_MODE_OFF | CC1_ITERM_60MA |
+			       CC1_VFCHG_4_2V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_540MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
+			      CC2_ICHG_500MA);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set IBAT & TBAT monitor */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* launch fast-charge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_FASTCHARGE);
+	/* vchg threshold setting */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
+out:
+	return ret;
+}
+
+static void stop_charge(struct pm860x_charger_info *info, int vbatt)
+{
+	dev_dbg(info->dev, "Stop charging!\n");
+	pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
+	if (vbatt > CHARGE_THRESHOLD && info->online)
+		set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+}
+
+static void power_off_notification(struct pm860x_charger_info *info)
+{
+	dev_dbg(info->dev, "Power-off notification!\n");
+}
+
+static int set_charging_fsm(struct pm860x_charger_info *info)
+{
+	struct power_supply *psy;
+	union power_supply_propval data;
+	unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
+		"fastcharge",
+	};
+	int ret;
+	int vbatt;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		return -EINVAL;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data);
+	if (ret)
+		return ret;
+	vbatt = data.intval / 1000;
+
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
+	if (ret)
+		return ret;
+
+	mutex_lock(&info->lock);
+	info->present = data.intval;
+
+	dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
+		"Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);
+
+	switch (info->state) {
+	case FSM_INIT:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt > DISCHARGE_THRESHOLD) {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD) {
+				power_off_notification(info);
+			} else {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			}
+		}
+		break;
+	case FSM_PRECHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt > PRECHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_FASTCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_DISCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD)
+				power_off_notification(info);
+			else if (vbatt > CHARGE_THRESHOLD && info->online)
+				set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+		}
+		break;
+	default:
+		dev_warn(info->dev, "FSM meets wrong state:%d\n",
+			 info->state);
+		break;
+	}
+	dev_dbg(info->dev,
+		"Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	mutex_unlock(&info->lock);
+
+	return 0;
+}
+
+static irqreturn_t pm860x_charger_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
+		(info->online) ? "online" : "N/A", info->allowed);
+
+	set_charging_fsm(info);
+
+	power_supply_changed(&info->usb);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_temp_handler(int irq, void *data)
+{
+	struct power_supply *psy;
+	struct pm860x_charger_info *info = data;
+	union power_supply_propval temp;
+	int value;
+	int ret;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		goto out;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
+	if (ret)
+		goto out;
+	value = temp.intval / 10;
+
+	mutex_lock(&info->lock);
+	/* Temperature < -10 C or >40 C, Will not allow charge */
+	if (value < -10 || value > 40)
+		info->allowed = 0;
+	else
+		info->allowed = 1;
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_exception_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+	info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);
+
+	set_charging_fsm(info);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_done_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	struct power_supply *psy;
+	union power_supply_propval val;
+	int ret;
+	int vbatt;
+
+	mutex_lock(&info->lock);
+	/* pre-charge done, will transimit to fast-charge stage */
+	if (info->state == FSM_PRECHARGE) {
+		info->allowed = 1;
+		goto out;
+	}
+	/*
+	 * Fast charge done, delay to read
+	 * the correct status of CHG_DET.
+	 */
+	mdelay(5);
+	info->allowed = 0;
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		goto out;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
+	if (ret)
+		goto out;
+	vbatt = val.intval / 1000;
+	/*
+	 * CHG_DONE interrupt is faster than CHG_DET interrupt when
+	 * plug in/out usb, So we can not rely on info->online, we
+	 * need check pm8607 status register to check usb is online
+	 * or not, then we can decide it is real charge done
+	 * automatically or it is triggered by usb plug out;
+	 */
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		goto out;
+	if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
+		psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val);
+
+out:
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+
+	set_vbatt_threshold(info, 0, 0);
+
+	if (info->present && info->online)
+		info->allowed = 1;
+	else
+		info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vchg_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int vchg = 0;
+
+	if (info->present)
+		goto out;
+
+	measure_vchg(info, &vchg);
+
+	mutex_lock(&info->lock);
+	if (!info->online) {
+		int status;
+		/* check if over-temp on pm8606 or not */
+		status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
+		if (status & OVER_TEMP_FLAG) {
+			/* clear over temp flag and set auto recover */
+			pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
+					OVER_TEMP_FLAG, OVER_TEMP_FLAG);
+			pm860x_set_bits(info->i2c_8606,
+					PM8606_VSYS,
+					OVTEMP_AUTORECOVER,
+					OVTEMP_AUTORECOVER);
+			dev_dbg(info->dev,
+				"%s, pm8606 over-temp occure\n", __func__);
+		}
+	}
+
+	if (vchg > VCHG_NORMAL_CHECK) {
+		set_vchg_threshold(info, VCHG_OVP_LOW, 0);
+		info->allowed = 0;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg occure,vchg = %dmv\n",
+			__func__, vchg);
+	} else if (vchg < VCHG_OVP_LOW) {
+		set_vchg_threshold(info, VCHG_NORMAL_LOW,
+				   VCHG_NORMAL_HIGH);
+		info->allowed = 1;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg recover,vchg = %dmv\n",
+			__func__, vchg);
+	}
+	mutex_unlock(&info->lock);
+
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+out:
+	return IRQ_HANDLED;
+}
+
+static int pm860x_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct pm860x_charger_info *info =
+	    dev_get_drvdata(psy->dev->parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (info->state == FSM_FASTCHARGE ||
+				info->state == FSM_PRECHARGE)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->online;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static enum power_supply_property pm860x_usb_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int pm860x_init_charger(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+	info->state = FSM_INIT;
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+	return 0;
+}
+
+static struct pm860x_irq_desc {
+	const char *name;
+	irqreturn_t (*handler)(int irq, void *data);
+} pm860x_irq_descs[] = {
+	{ "usb supply detect", pm860x_charger_handler },
+	{ "charge done", pm860x_done_handler },
+	{ "charge timeout", pm860x_exception_handler },
+	{ "charge fault", pm860x_exception_handler },
+	{ "temperature", pm860x_temp_handler },
+	{ "vbatt", pm860x_vbattery_handler },
+	{ "vchg", pm860x_vchg_handler },
+};
+
+static __devinit int pm860x_charger_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_charger_info *info;
+	int ret;
+	int count;
+	int i;
+	int j;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	count = pdev->num_resources;
+	for (i = 0, j = 0; i < count; i++) {
+		info->irq[j] = platform_get_irq(pdev, i);
+		if (info->irq[j] < 0)
+			continue;
+		j++;
+	}
+	info->irq_nums = j;
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->i2c_8606 =
+	    (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
+	if (!info->i2c_8606) {
+		dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	info->dev = &pdev->dev;
+
+	/* set init value for the case we are not using battery */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	info->usb.name = "usb";
+	info->usb.type = POWER_SUPPLY_TYPE_USB;
+	info->usb.supplied_to = pm860x_supplied_to;
+	info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
+	info->usb.properties = pm860x_usb_props;
+	info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props);
+	info->usb.get_property = pm860x_usb_get_prop;
+	ret = power_supply_register(&pdev->dev, &info->usb);
+	if (ret)
+		goto out;
+
+	pm860x_init_charger(info);
+
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
+		ret = request_threaded_irq(info->irq[i], NULL,
+			pm860x_irq_descs[i].handler,
+			IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+				info->irq[i], ret);
+			goto out_irq;
+		}
+	}
+	return 0;
+
+out_irq:
+	while (--i >= 0)
+		free_irq(info->irq[i], info);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit pm860x_charger_remove(struct platform_device *pdev)
+{
+	struct pm860x_charger_info *info = platform_get_drvdata(pdev);
+	int i;
+
+	platform_set_drvdata(pdev, NULL);
+	power_supply_unregister(&info->usb);
+	free_irq(info->irq[0], info);
+	for (i = 0; i < info->irq_nums; i++)
+		free_irq(info->irq[i], info);
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver pm860x_charger_driver = {
+	.driver = {
+		   .name = "88pm860x-charger",
+		   .owner = THIS_MODULE,
+	},
+	.probe = pm860x_charger_probe,
+	.remove = __devexit_p(pm860x_charger_remove),
+};
+module_platform_driver(pm860x_charger_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c1892f3..9d80477 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -62,6 +62,12 @@
 	help
 	  This driver is used for testing. It's safe to say M here.
 
+config BATTERY_88PM860X
+	tristate "Marvell 88PM860x battery driver"
+	depends on MFD_88PM860X
+	help
+	  Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
 config BATTERY_DS2760
 	tristate "DS2760 battery driver (HP iPAQ & others)"
 	depends on W1 && W1_SLAVE_DS2760
@@ -167,7 +173,6 @@
 config BATTERY_DA9052
 	tristate "Dialog DA9052 Battery"
 	depends on PMIC_DA9052
-	depends on BROKEN
 	help
 	  Say Y here to enable support for batteries charger integrated into
 	  DA9052 PMIC.
@@ -203,6 +208,12 @@
 	help
 	  Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
 
+config CHARGER_88PM860X
+	tristate "Marvell 88PM860x Charger driver"
+	depends on MFD_88PM860X && BATTERY_88PM860X
+	help
+	  Say Y here to enable charger for Marvell 88PM860x chip.
+
 config CHARGER_PCF50633
 	tristate "NXP PCF50633 MBC"
 	depends on MFD_PCF50633
@@ -255,6 +266,13 @@
 	help
 	  Say Y here to enable support for LP8727 Charger Driver.
 
+config CHARGER_LP8788
+	tristate "TI LP8788 charger driver"
+	depends on MFD_LP8788
+	depends on LP8788_ADC
+	help
+	  Say Y to enable support for the LP8788 linear charger.
+
 config CHARGER_GPIO
 	tristate "GPIO charger"
 	depends on GPIOLIB
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index ee58afb..059c0a9 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -14,6 +14,7 @@
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 obj-$(CONFIG_TEST_POWER)	+= test_power.o
 
+obj-$(CONFIG_BATTERY_88PM860X)	+= 88pm860x_battery.o
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
 obj-$(CONFIG_BATTERY_DS2780)	+= ds2780_battery.o
 obj-$(CONFIG_BATTERY_DS2781)	+= ds2781_battery.o
@@ -31,6 +32,7 @@
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_S3C_ADC)	+= s3c_adc_battery.o
+obj-$(CONFIG_CHARGER_88PM860X)	+= 88pm860x_charger.o
 obj-$(CONFIG_CHARGER_PCF50633)	+= pcf50633-charger.o
 obj-$(CONFIG_BATTERY_JZ4740)	+= jz4740-battery.o
 obj-$(CONFIG_BATTERY_INTEL_MID)	+= intel_mid_battery.o
@@ -39,6 +41,7 @@
 obj-$(CONFIG_CHARGER_MAX8903)	+= max8903_charger.o
 obj-$(CONFIG_CHARGER_TWL4030)	+= twl4030_charger.o
 obj-$(CONFIG_CHARGER_LP8727)	+= lp8727_charger.o
+obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
 obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
 obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index bba3cca..2b76943 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -1014,6 +1014,7 @@
 		create_singlethread_workqueue("ab8500_btemp_wq");
 	if (di->btemp_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index d4f0c98..c2ef947 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -2614,6 +2614,7 @@
 		create_singlethread_workqueue("ab8500_charger_wq");
 	if (di->charger_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index bf02225..11633e3 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -2506,6 +2506,7 @@
 	di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq");
 	if (di->fg_wq == NULL) {
 		dev_err(di->dev, "failed to create work queue\n");
+		ret = -ENOMEM;
 		goto free_device_info;
 	}
 
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
index 181ddec..5860d4d 100644
--- a/drivers/power/bq27x00_battery.c
+++ b/drivers/power/bq27x00_battery.c
@@ -814,7 +814,8 @@
 	di->bat.name = name;
 	di->bus.read = &bq27x00_read_i2c;
 
-	if (bq27x00_powersupply_init(di))
+	retval = bq27x00_powersupply_init(di);
+	if (retval)
 		goto batt_failed_3;
 
 	i2c_set_clientdata(client, di);
diff --git a/drivers/power/charger-manager.c b/drivers/power/charger-manager.c
index 526e5c9..92dfa5c 100644
--- a/drivers/power/charger-manager.c
+++ b/drivers/power/charger-manager.c
@@ -22,6 +22,7 @@
 #include <linux/platform_device.h>
 #include <linux/power/charger-manager.h>
 #include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
 
 static const char * const default_event_names[] = {
 	[CM_EVENT_UNKNOWN] = "Unknown",
@@ -227,6 +228,58 @@
 }
 
 /**
+ * is_full_charged - Returns true if the battery is fully charged.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_full_charged(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	union power_supply_propval val;
+	int ret = 0;
+	int uV;
+
+	/* If there is no battery, it cannot be charged */
+	if (!is_batt_present(cm)) {
+		val.intval = 0;
+		goto out;
+	}
+
+	if (cm->fuel_gauge && desc->fullbatt_full_capacity > 0) {
+		/* Not full if capacity of fuel gauge isn't full */
+		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+				POWER_SUPPLY_PROP_CHARGE_FULL, &val);
+		if (!ret && val.intval > desc->fullbatt_full_capacity) {
+			val.intval = 1;
+			goto out;
+		}
+	}
+
+	/* Full, if it's over the fullbatt voltage */
+	if (desc->fullbatt_uV > 0) {
+		ret = get_batt_uV(cm, &uV);
+		if (!ret && uV >= desc->fullbatt_uV) {
+			val.intval = 1;
+			goto out;
+		}
+	}
+
+	/* Full, if the capacity is more than fullbatt_soc */
+	if (cm->fuel_gauge && desc->fullbatt_soc > 0) {
+		ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+				POWER_SUPPLY_PROP_CAPACITY, &val);
+		if (!ret && val.intval >= desc->fullbatt_soc) {
+			val.intval = 1;
+			goto out;
+		}
+	}
+
+	val.intval = 0;
+
+out:
+	return val.intval ? true : false;
+}
+
+/**
  * is_polling_required - Return true if need to continue polling for this CM.
  * @cm: the Charger Manager representing the battery.
  */
@@ -271,10 +324,46 @@
 	if (enable) {
 		if (cm->emergency_stop)
 			return -EAGAIN;
-		for (i = 0 ; i < desc->num_charger_regulators ; i++)
-			regulator_enable(desc->charger_regulators[i].consumer);
+
+		/*
+		 * Save start time of charging to limit
+		 * maximum possible charging time.
+		 */
+		cm->charging_start_time = ktime_to_ms(ktime_get());
+		cm->charging_end_time = 0;
+
+		for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+			if (desc->charger_regulators[i].externally_control)
+				continue;
+
+			err = regulator_enable(desc->charger_regulators[i].consumer);
+			if (err < 0) {
+				dev_warn(cm->dev,
+					"Cannot enable %s regulator\n",
+					desc->charger_regulators[i].regulator_name);
+			}
+		}
 	} else {
 		/*
+		 * Save end time of charging to maintain fully charged state
+		 * of battery after full-batt.
+		 */
+		cm->charging_start_time = 0;
+		cm->charging_end_time = ktime_to_ms(ktime_get());
+
+		for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+			if (desc->charger_regulators[i].externally_control)
+				continue;
+
+			err = regulator_disable(desc->charger_regulators[i].consumer);
+			if (err < 0) {
+				dev_warn(cm->dev,
+					"Cannot disable %s regulator\n",
+					desc->charger_regulators[i].regulator_name);
+			}
+		}
+
+		/*
 		 * Abnormal battery state - Stop charging forcibly,
 		 * even if charger was enabled at the other places
 		 */
@@ -400,18 +489,65 @@
 		return;
 	}
 
-	diff = cm->fullbatt_vchk_uV;
+	diff = desc->fullbatt_uV;
 	diff -= batt_uV;
 
-	dev_dbg(cm->dev, "VBATT dropped %duV after full-batt.\n", diff);
+	dev_info(cm->dev, "VBATT dropped %duV after full-batt.\n", diff);
 
 	if (diff > desc->fullbatt_vchkdrop_uV) {
 		try_charger_restart(cm);
-		uevent_notify(cm, "Recharge");
+		uevent_notify(cm, "Recharging");
 	}
 }
 
 /**
+ * check_charging_duration - Monitor charging/discharging duration
+ * @cm: the Charger Manager representing the battery.
+ *
+ * If whole charging duration exceed 'charging_max_duration_ms',
+ * cm stop charging to prevent overcharge/overheat. If discharging
+ * duration exceed 'discharging _max_duration_ms', charger cable is
+ * attached, after full-batt, cm start charging to maintain fully
+ * charged state for battery.
+ */
+static int check_charging_duration(struct charger_manager *cm)
+{
+	struct charger_desc *desc = cm->desc;
+	u64 curr = ktime_to_ms(ktime_get());
+	u64 duration;
+	int ret = false;
+
+	if (!desc->charging_max_duration_ms &&
+			!desc->discharging_max_duration_ms)
+		return ret;
+
+	if (cm->charger_enabled) {
+		duration = curr - cm->charging_start_time;
+
+		if (duration > desc->charging_max_duration_ms) {
+			dev_info(cm->dev, "Charging duration exceed %lldms",
+				 desc->charging_max_duration_ms);
+			uevent_notify(cm, "Discharging");
+			try_charger_enable(cm, false);
+			ret = true;
+		}
+	} else if (is_ext_pwr_online(cm) && !cm->charger_enabled) {
+		duration = curr - cm->charging_end_time;
+
+		if (duration > desc->charging_max_duration_ms &&
+				is_ext_pwr_online(cm)) {
+			dev_info(cm->dev, "DisCharging duration exceed %lldms",
+				 desc->discharging_max_duration_ms);
+			uevent_notify(cm, "Recharing");
+			try_charger_enable(cm, true);
+			ret = true;
+		}
+	}
+
+	return ret;
+}
+
+/**
  * _cm_monitor - Monitor the temperature and return true for exceptions.
  * @cm: the Charger Manager representing the battery.
  *
@@ -426,10 +562,14 @@
 	dev_dbg(cm->dev, "monitoring (%2.2d.%3.3dC)\n",
 		cm->last_temp_mC / 1000, cm->last_temp_mC % 1000);
 
-	/* It has been stopped or charging already */
-	if (!!temp == !!cm->emergency_stop)
+	/* It has been stopped already */
+	if (temp && cm->emergency_stop)
 		return false;
 
+	/*
+	 * Check temperature whether overheat or cold.
+	 * If temperature is out of range normal state, stop charging.
+	 */
 	if (temp) {
 		cm->emergency_stop = temp;
 		if (!try_charger_enable(cm, false)) {
@@ -438,10 +578,41 @@
 			else
 				uevent_notify(cm, "COLD");
 		}
+
+	/*
+	 * Check whole charging duration and discharing duration
+	 * after full-batt.
+	 */
+	} else if (!cm->emergency_stop && check_charging_duration(cm)) {
+		dev_dbg(cm->dev,
+			"Charging/Discharging duration is out of range");
+	/*
+	 * Check dropped voltage of battery. If battery voltage is more
+	 * dropped than fullbatt_vchkdrop_uV after fully charged state,
+	 * charger-manager have to recharge battery.
+	 */
+	} else if (!cm->emergency_stop && is_ext_pwr_online(cm) &&
+			!cm->charger_enabled) {
+		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
+
+	/*
+	 * Check whether fully charged state to protect overcharge
+	 * if charger-manager is charging for battery.
+	 */
+	} else if (!cm->emergency_stop && is_full_charged(cm) &&
+			cm->charger_enabled) {
+		dev_info(cm->dev, "EVENT_HANDLE: Battery Fully Charged.\n");
+		uevent_notify(cm, default_event_names[CM_EVENT_BATT_FULL]);
+
+		try_charger_enable(cm, false);
+
+		fullbatt_vchk(&cm->fullbatt_vchk_work.work);
 	} else {
 		cm->emergency_stop = 0;
-		if (!try_charger_enable(cm, true))
-			uevent_notify(cm, "CHARGING");
+		if (is_ext_pwr_online(cm)) {
+			if (!try_charger_enable(cm, true))
+				uevent_notify(cm, "CHARGING");
+		}
 	}
 
 	return true;
@@ -704,47 +875,10 @@
 			val->intval = 0;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_FULL:
-		if (cm->fuel_gauge) {
-			if (cm->fuel_gauge->get_property(cm->fuel_gauge,
-			    POWER_SUPPLY_PROP_CHARGE_FULL, val) == 0)
-				break;
-		}
-
-		if (is_ext_pwr_online(cm)) {
-			/* Not full if it's charging. */
-			if (is_charging(cm)) {
-				val->intval = 0;
-				break;
-			}
-			/*
-			 * Full if it's powered but not charging andi
-			 * not forced stop by emergency
-			 */
-			if (!cm->emergency_stop) {
-				val->intval = 1;
-				break;
-			}
-		}
-
-		/* Full if it's over the fullbatt voltage */
-		ret = get_batt_uV(cm, &uV);
-		if (!ret && desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV &&
-		    !is_charging(cm)) {
+		if (is_full_charged(cm))
 			val->intval = 1;
-			break;
-		}
-
-		/* Full if the cap is 100 */
-		if (cm->fuel_gauge) {
-			ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
-					POWER_SUPPLY_PROP_CAPACITY, val);
-			if (!ret && val->intval >= 100 && !is_charging(cm)) {
-				val->intval = 1;
-				break;
-			}
-		}
-
-		val->intval = 0;
+		else
+			val->intval = 0;
 		ret = 0;
 		break;
 	case POWER_SUPPLY_PROP_CHARGE_NOW:
@@ -1034,7 +1168,26 @@
 	struct charger_cable *cable =
 		container_of(self, struct charger_cable, nb);
 
+	/*
+	 * The newly state of charger cable.
+	 * If cable is attached, cable->attached is true.
+	 */
 	cable->attached = event;
+
+	/*
+	 * Setup monitoring to check battery state
+	 * when charger cable is attached.
+	 */
+	if (cable->attached && is_polling_required(cable->cm)) {
+		if (work_pending(&setup_polling))
+			cancel_work_sync(&setup_polling);
+		schedule_work(&setup_polling);
+	}
+
+	/*
+	 * Setup work for controlling charger(regulator)
+	 * according to charger cable.
+	 */
 	schedule_work(&cable->wq);
 
 	return NOTIFY_DONE;
@@ -1071,12 +1224,101 @@
 	return ret;
 }
 
+/* help function of sysfs node to control charger(regulator) */
+static ssize_t charger_name_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator, attr_name);
+
+	return sprintf(buf, "%s\n", charger->regulator_name);
+}
+
+static ssize_t charger_state_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator, attr_state);
+	int state = 0;
+
+	if (!charger->externally_control)
+		state = regulator_is_enabled(charger->consumer);
+
+	return sprintf(buf, "%s\n", state ? "enabled" : "disabled");
+}
+
+static ssize_t charger_externally_control_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct charger_regulator *charger = container_of(attr,
+			struct charger_regulator, attr_externally_control);
+
+	return sprintf(buf, "%d\n", charger->externally_control);
+}
+
+static ssize_t charger_externally_control_store(struct device *dev,
+				struct device_attribute *attr, const char *buf,
+				size_t count)
+{
+	struct charger_regulator *charger
+		= container_of(attr, struct charger_regulator,
+					attr_externally_control);
+	struct charger_manager *cm = charger->cm;
+	struct charger_desc *desc = cm->desc;
+	int i;
+	int ret;
+	int externally_control;
+	int chargers_externally_control = 1;
+
+	ret = sscanf(buf, "%d", &externally_control);
+	if (ret == 0) {
+		ret = -EINVAL;
+		return ret;
+	}
+
+	if (!externally_control) {
+		charger->externally_control = 0;
+		return count;
+	}
+
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		if (&desc->charger_regulators[i] != charger &&
+			      !desc->charger_regulators[i].externally_control) {
+			/*
+			 * At least, one charger is controlled by
+			 * charger-manager
+			 */
+			chargers_externally_control = 0;
+			break;
+		}
+	}
+
+	if (!chargers_externally_control) {
+		if (cm->charger_enabled) {
+			try_charger_enable(charger->cm, false);
+			charger->externally_control = externally_control;
+			try_charger_enable(charger->cm, true);
+		} else {
+			charger->externally_control = externally_control;
+		}
+	} else {
+		dev_warn(cm->dev,
+			"'%s' regulator should be controlled "
+			"in charger-manager because charger-manager "
+			"must need at least one charger for charging\n",
+			charger->regulator_name);
+	}
+
+	return count;
+}
+
 static int charger_manager_probe(struct platform_device *pdev)
 {
 	struct charger_desc *desc = dev_get_platdata(&pdev->dev);
 	struct charger_manager *cm;
 	int ret = 0, i = 0;
 	int j = 0;
+	int chargers_externally_control = 1;
 	union power_supply_propval val;
 
 	if (g_desc && !rtc_dev && g_desc->rtc_name) {
@@ -1128,6 +1370,15 @@
 		desc->fullbatt_vchkdrop_ms = 0;
 		desc->fullbatt_vchkdrop_uV = 0;
 	}
+	if (desc->fullbatt_soc == 0) {
+		dev_info(&pdev->dev, "Ignoring full-battery soc(state of"
+					" charge) threshold as it is not"
+					" supplied.");
+	}
+	if (desc->fullbatt_full_capacity == 0) {
+		dev_info(&pdev->dev, "Ignoring full-battery full capacity"
+					" threshold as it is not supplied.");
+	}
 
 	if (!desc->charger_regulators || desc->num_charger_regulators < 1) {
 		ret = -EINVAL;
@@ -1185,6 +1436,15 @@
 		goto err_chg_stat;
 	}
 
+	if (!desc->charging_max_duration_ms ||
+			!desc->discharging_max_duration_ms) {
+		dev_info(&pdev->dev, "Cannot limit charging duration "
+			 "checking mechanism to prevent overcharge/overheat "
+			 "and control discharging duration");
+		desc->charging_max_duration_ms = 0;
+		desc->discharging_max_duration_ms = 0;
+	}
+
 	platform_set_drvdata(pdev, cm);
 
 	memcpy(&cm->charger_psy, &psy_default, sizeof(psy_default));
@@ -1248,6 +1508,8 @@
 	for (i = 0 ; i < desc->num_charger_regulators ; i++) {
 		struct charger_regulator *charger
 					= &desc->charger_regulators[i];
+		char buf[11];
+		char *str;
 
 		charger->consumer = regulator_get(&pdev->dev,
 					charger->regulator_name);
@@ -1257,6 +1519,7 @@
 			ret = -EINVAL;
 			goto err_chg_get;
 		}
+		charger->cm = cm;
 
 		for (j = 0 ; j < charger->num_cables ; j++) {
 			struct charger_cable *cable = &charger->cables[j];
@@ -1270,6 +1533,71 @@
 			cable->charger = charger;
 			cable->cm = cm;
 		}
+
+		/* Create sysfs entry to control charger(regulator) */
+		snprintf(buf, 10, "charger.%d", i);
+		str = kzalloc(sizeof(char) * (strlen(buf) + 1), GFP_KERNEL);
+		if (!str) {
+			for (i--; i >= 0; i--) {
+				charger = &desc->charger_regulators[i];
+				kfree(charger->attr_g.name);
+			}
+			ret = -ENOMEM;
+
+			goto err_extcon;
+		}
+		strcpy(str, buf);
+
+		charger->attrs[0] = &charger->attr_name.attr;
+		charger->attrs[1] = &charger->attr_state.attr;
+		charger->attrs[2] = &charger->attr_externally_control.attr;
+		charger->attrs[3] = NULL;
+		charger->attr_g.name = str;
+		charger->attr_g.attrs = charger->attrs;
+
+		sysfs_attr_init(&charger->attr_name.attr);
+		charger->attr_name.attr.name = "name";
+		charger->attr_name.attr.mode = 0444;
+		charger->attr_name.show = charger_name_show;
+
+		sysfs_attr_init(&charger->attr_state.attr);
+		charger->attr_state.attr.name = "state";
+		charger->attr_state.attr.mode = 0444;
+		charger->attr_state.show = charger_state_show;
+
+		sysfs_attr_init(&charger->attr_externally_control.attr);
+		charger->attr_externally_control.attr.name
+				= "externally_control";
+		charger->attr_externally_control.attr.mode = 0644;
+		charger->attr_externally_control.show
+				= charger_externally_control_show;
+		charger->attr_externally_control.store
+				= charger_externally_control_store;
+
+		if (!desc->charger_regulators[i].externally_control ||
+				!chargers_externally_control) {
+			chargers_externally_control = 0;
+		}
+		dev_info(&pdev->dev, "'%s' regulator's externally_control"
+				"is %d\n", charger->regulator_name,
+				charger->externally_control);
+
+		ret = sysfs_create_group(&cm->charger_psy.dev->kobj,
+				&charger->attr_g);
+		if (ret < 0) {
+			dev_info(&pdev->dev, "Cannot create sysfs entry"
+					"of %s regulator\n",
+					charger->regulator_name);
+		}
+	}
+
+	if (chargers_externally_control) {
+		dev_err(&pdev->dev, "Cannot register regulator because "
+				"charger-manager must need at least "
+				"one charger for charging battery\n");
+
+		ret = -EINVAL;
+		goto err_chg_enable;
 	}
 
 	ret = try_charger_enable(cm, true);
@@ -1295,6 +1623,14 @@
 	return 0;
 
 err_chg_enable:
+	for (i = 0; i < desc->num_charger_regulators; i++) {
+		struct charger_regulator *charger;
+
+		charger = &desc->charger_regulators[i];
+		sysfs_remove_group(&cm->charger_psy.dev->kobj,
+				&charger->attr_g);
+		kfree(charger->attr_g.name);
+	}
 err_extcon:
 	for (i = 0 ; i < desc->num_charger_regulators ; i++) {
 		struct charger_regulator *charger
diff --git a/drivers/power/da9030_battery.c b/drivers/power/da9030_battery.c
index 3fd3e95..94762e6 100644
--- a/drivers/power/da9030_battery.c
+++ b/drivers/power/da9030_battery.c
@@ -187,8 +187,8 @@
 
 static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
 {
-	charger->debug_file = debugfs_create_file("charger", 0666, 0, charger,
-						 &bat_debug_fops);
+	charger->debug_file = debugfs_create_file("charger", 0666, NULL,
+						  charger, &bat_debug_fops);
 	return charger->debug_file;
 }
 
diff --git a/drivers/power/da9052-battery.c b/drivers/power/da9052-battery.c
index a5f6a0e..d9d034d 100644
--- a/drivers/power/da9052-battery.c
+++ b/drivers/power/da9052-battery.c
@@ -327,7 +327,7 @@
 	return tmp;
 }
 
-unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
+static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
 {
 	int i;
 
@@ -345,6 +345,13 @@
 		     && (adc_temp <= vc_tbl_ref[i]))
 				return i + 1;
 	}
+	/*
+	 * For some reason authors of the driver didn't presume that we can
+	 * end up here. It might be OK, but might be not, no one knows for
+	 * sure. Go check your battery, is it on fire?
+	 */
+	WARN_ON(1);
+	return 0;
 }
 
 static int da9052_bat_read_capacity(struct da9052_battery *bat, int *capacity)
@@ -616,7 +623,7 @@
 	return 0;
 
 err:
-	for (; i >= 0; i--) {
+	while (--i >= 0) {
 		irq = platform_get_irq_byname(pdev, da9052_bat_irqs[i]);
 		free_irq(bat->da9052->irq_base + irq, bat);
 	}
diff --git a/drivers/power/ds2781_battery.c b/drivers/power/ds2781_battery.c
index 7a1ff4e..22b3c8c 100644
--- a/drivers/power/ds2781_battery.c
+++ b/drivers/power/ds2781_battery.c
@@ -755,11 +755,9 @@
 	int ret = 0;
 	struct ds2781_device_info *dev_info;
 
-	dev_info = kzalloc(sizeof(*dev_info), GFP_KERNEL);
-	if (!dev_info) {
-		ret = -ENOMEM;
-		goto fail;
-	}
+	dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+	if (!dev_info)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, dev_info);
 
@@ -774,7 +772,7 @@
 	ret = power_supply_register(&pdev->dev, &dev_info->bat);
 	if (ret) {
 		dev_err(dev_info->dev, "failed to register battery\n");
-		goto fail_free_info;
+		goto fail;
 	}
 
 	ret = sysfs_create_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
@@ -808,8 +806,6 @@
 	sysfs_remove_group(&dev_info->bat.dev->kobj, &ds2781_attr_group);
 fail_unregister:
 	power_supply_unregister(&dev_info->bat);
-fail_free_info:
-	kfree(dev_info);
 fail:
 	return ret;
 }
@@ -823,7 +819,6 @@
 
 	power_supply_unregister(&dev_info->bat);
 
-	kfree(dev_info);
 	return 0;
 }
 
@@ -834,20 +829,7 @@
 	.probe	  = ds2781_battery_probe,
 	.remove   = __devexit_p(ds2781_battery_remove),
 };
-
-static int __init ds2781_battery_init(void)
-{
-	return platform_driver_register(&ds2781_battery_driver);
-}
-
-static void __exit ds2781_battery_exit(void)
-{
-	platform_driver_unregister(&ds2781_battery_driver);
-}
-
-module_init(ds2781_battery_init);
-module_exit(ds2781_battery_exit);
-
+module_platform_driver(ds2781_battery_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
diff --git a/drivers/power/lp8727_charger.c b/drivers/power/lp8727_charger.c
index 6a364f4..c628224 100644
--- a/drivers/power/lp8727_charger.c
+++ b/drivers/power/lp8727_charger.c
@@ -17,61 +17,65 @@
 #include <linux/power_supply.h>
 #include <linux/platform_data/lp8727.h>
 
-#define DEBOUNCE_MSEC	270
+#define LP8788_NUM_INTREGS	2
+#define DEFAULT_DEBOUNCE_MSEC	270
 
 /* Registers */
-#define CTRL1		0x1
-#define CTRL2		0x2
-#define	SWCTRL		0x3
-#define INT1		0x4
-#define INT2		0x5
-#define STATUS1		0x6
-#define STATUS2		0x7
-#define CHGCTRL2	0x9
+#define LP8727_CTRL1		0x1
+#define LP8727_CTRL2		0x2
+#define LP8727_SWCTRL		0x3
+#define LP8727_INT1		0x4
+#define LP8727_INT2		0x5
+#define LP8727_STATUS1		0x6
+#define LP8727_STATUS2		0x7
+#define LP8727_CHGCTRL2		0x9
 
 /* CTRL1 register */
-#define CP_EN		(1 << 0)
-#define ADC_EN		(1 << 1)
-#define ID200_EN	(1 << 4)
+#define LP8727_CP_EN		BIT(0)
+#define LP8727_ADC_EN		BIT(1)
+#define LP8727_ID200_EN		BIT(4)
 
 /* CTRL2 register */
-#define CHGDET_EN	(1 << 1)
-#define INT_EN		(1 << 6)
+#define LP8727_CHGDET_EN	BIT(1)
+#define LP8727_INT_EN		BIT(6)
 
 /* SWCTRL register */
-#define SW_DM1_DM	(0x0 << 0)
-#define SW_DM1_U1	(0x1 << 0)
-#define SW_DM1_HiZ	(0x7 << 0)
-#define SW_DP2_DP	(0x0 << 3)
-#define SW_DP2_U2	(0x1 << 3)
-#define SW_DP2_HiZ	(0x7 << 3)
+#define LP8727_SW_DM1_DM	(0x0 << 0)
+#define LP8727_SW_DM1_HiZ	(0x7 << 0)
+#define LP8727_SW_DP2_DP	(0x0 << 3)
+#define LP8727_SW_DP2_HiZ	(0x7 << 3)
 
 /* INT1 register */
-#define IDNO		(0xF << 0)
-#define VBUS		(1 << 4)
+#define LP8727_IDNO		(0xF << 0)
+#define LP8727_VBUS		BIT(4)
 
 /* STATUS1 register */
-#define CHGSTAT		(3 << 4)
-#define CHPORT		(1 << 6)
-#define DCPORT		(1 << 7)
+#define LP8727_CHGSTAT		(3 << 4)
+#define LP8727_CHPORT		BIT(6)
+#define LP8727_DCPORT		BIT(7)
+#define LP8727_STAT_EOC		0x30
 
 /* STATUS2 register */
-#define TEMP_STAT	(3 << 5)
+#define LP8727_TEMP_STAT	(3 << 5)
+#define LP8727_TEMP_SHIFT	5
+
+/* CHGCTRL2 register */
+#define LP8727_ICHG_SHIFT	4
 
 enum lp8727_dev_id {
-	ID_NONE,
-	ID_TA,
-	ID_DEDICATED_CHG,
-	ID_USB_CHG,
-	ID_USB_DS,
-	ID_MAX,
+	LP8727_ID_NONE,
+	LP8727_ID_TA,
+	LP8727_ID_DEDICATED_CHG,
+	LP8727_ID_USB_CHG,
+	LP8727_ID_USB_DS,
+	LP8727_ID_MAX,
 };
 
-enum lp8727_chg_stat {
-	PRECHG,
-	CC,
-	CV,
-	EOC,
+enum lp8727_die_temp {
+	LP8788_TEMP_75C,
+	LP8788_TEMP_95C,
+	LP8788_TEMP_115C,
+	LP8788_TEMP_135C,
 };
 
 struct lp8727_psy {
@@ -84,12 +88,17 @@
 	struct device *dev;
 	struct i2c_client *client;
 	struct mutex xfer_lock;
-	struct delayed_work work;
-	struct workqueue_struct *irqthread;
-	struct lp8727_platform_data *pdata;
 	struct lp8727_psy *psy;
-	struct lp8727_chg_param *chg_parm;
+	struct lp8727_platform_data *pdata;
+
+	/* Charger Data */
 	enum lp8727_dev_id devid;
+	struct lp8727_chg_param *chg_param;
+
+	/* Interrupt Handling */
+	int irq;
+	struct delayed_work work;
+	unsigned long debounce_jiffies;
 };
 
 static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
@@ -119,81 +128,84 @@
 	return ret;
 }
 
-static int lp8727_is_charger_attached(const char *name, int id)
+static bool lp8727_is_charger_attached(const char *name, int id)
 {
-	if (name) {
-		if (!strcmp(name, "ac"))
-			return (id == ID_TA || id == ID_DEDICATED_CHG) ? 1 : 0;
-		else if (!strcmp(name, "usb"))
-			return (id == ID_USB_CHG) ? 1 : 0;
-	}
+	if (!strcmp(name, "ac"))
+		return id == LP8727_ID_TA || id == LP8727_ID_DEDICATED_CHG;
+	else if (!strcmp(name, "usb"))
+		return id == LP8727_ID_USB_CHG;
 
-	return (id >= ID_TA && id <= ID_USB_CHG) ? 1 : 0;
+	return id >= LP8727_ID_TA && id <= LP8727_ID_USB_CHG;
 }
 
 static int lp8727_init_device(struct lp8727_chg *pchg)
 {
 	u8 val;
 	int ret;
+	u8 intstat[LP8788_NUM_INTREGS];
 
-	val = ID200_EN | ADC_EN | CP_EN;
-	ret = lp8727_write_byte(pchg, CTRL1, val);
+	/* clear interrupts */
+	ret = lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS);
 	if (ret)
 		return ret;
 
-	val = INT_EN | CHGDET_EN;
-	ret = lp8727_write_byte(pchg, CTRL2, val);
+	val = LP8727_ID200_EN | LP8727_ADC_EN | LP8727_CP_EN;
+	ret = lp8727_write_byte(pchg, LP8727_CTRL1, val);
 	if (ret)
 		return ret;
 
-	return 0;
+	val = LP8727_INT_EN | LP8727_CHGDET_EN;
+	return lp8727_write_byte(pchg, LP8727_CTRL2, val);
 }
 
 static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg)
 {
 	u8 val;
-	lp8727_read_byte(pchg, STATUS1, &val);
-	return val & DCPORT;
+
+	lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+	return val & LP8727_DCPORT;
 }
 
 static int lp8727_is_usb_charger(struct lp8727_chg *pchg)
 {
 	u8 val;
-	lp8727_read_byte(pchg, STATUS1, &val);
-	return val & CHPORT;
+
+	lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+	return val & LP8727_CHPORT;
 }
 
-static void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw)
+static inline void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw)
 {
-	lp8727_write_byte(pchg, SWCTRL, sw);
+	lp8727_write_byte(pchg, LP8727_SWCTRL, sw);
 }
 
 static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin)
 {
-	u8 devid = ID_NONE;
-	u8 swctrl = SW_DM1_HiZ | SW_DP2_HiZ;
+	struct lp8727_platform_data *pdata = pchg->pdata;
+	u8 devid = LP8727_ID_NONE;
+	u8 swctrl = LP8727_SW_DM1_HiZ | LP8727_SW_DP2_HiZ;
 
 	switch (id) {
 	case 0x5:
-		devid = ID_TA;
-		pchg->chg_parm = &pchg->pdata->ac;
+		devid = LP8727_ID_TA;
+		pchg->chg_param = pdata ? pdata->ac : NULL;
 		break;
 	case 0xB:
 		if (lp8727_is_dedicated_charger(pchg)) {
-			pchg->chg_parm = &pchg->pdata->ac;
-			devid = ID_DEDICATED_CHG;
+			pchg->chg_param = pdata ? pdata->ac : NULL;
+			devid = LP8727_ID_DEDICATED_CHG;
 		} else if (lp8727_is_usb_charger(pchg)) {
-			pchg->chg_parm = &pchg->pdata->usb;
-			devid = ID_USB_CHG;
-			swctrl = SW_DM1_DM | SW_DP2_DP;
+			pchg->chg_param = pdata ? pdata->usb : NULL;
+			devid = LP8727_ID_USB_CHG;
+			swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
 		} else if (vbusin) {
-			devid = ID_USB_DS;
-			swctrl = SW_DM1_DM | SW_DP2_DP;
+			devid = LP8727_ID_USB_DS;
+			swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
 		}
 		break;
 	default:
-		devid = ID_NONE;
-		pchg->chg_parm = NULL;
+		devid = LP8727_ID_NONE;
+		pchg->chg_param = NULL;
 		break;
 	}
 
@@ -205,24 +217,26 @@
 {
 	u8 val;
 
-	lp8727_read_byte(pchg, CTRL2, &val);
-	val |= CHGDET_EN;
-	lp8727_write_byte(pchg, CTRL2, val);
+	lp8727_read_byte(pchg, LP8727_CTRL2, &val);
+	val |= LP8727_CHGDET_EN;
+	lp8727_write_byte(pchg, LP8727_CTRL2, val);
 }
 
 static void lp8727_delayed_func(struct work_struct *_work)
 {
-	u8 intstat[2], idno, vbus;
-	struct lp8727_chg *pchg =
-	    container_of(_work, struct lp8727_chg, work.work);
+	struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg,
+						work.work);
+	u8 intstat[LP8788_NUM_INTREGS];
+	u8 idno;
+	u8 vbus;
 
-	if (lp8727_read_bytes(pchg, INT1, intstat, 2)) {
+	if (lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS)) {
 		dev_err(pchg->dev, "can not read INT registers\n");
 		return;
 	}
 
-	idno = intstat[0] & IDNO;
-	vbus = intstat[0] & VBUS;
+	idno = intstat[0] & LP8727_IDNO;
+	vbus = intstat[0] & LP8727_VBUS;
 
 	lp8727_id_detection(pchg, idno, vbus);
 	lp8727_enable_chgdet(pchg);
@@ -235,29 +249,44 @@
 static irqreturn_t lp8727_isr_func(int irq, void *ptr)
 {
 	struct lp8727_chg *pchg = ptr;
-	unsigned long delay = msecs_to_jiffies(DEBOUNCE_MSEC);
 
-	queue_delayed_work(pchg->irqthread, &pchg->work, delay);
-
+	schedule_delayed_work(&pchg->work, pchg->debounce_jiffies);
 	return IRQ_HANDLED;
 }
 
-static int lp8727_intr_config(struct lp8727_chg *pchg)
+static int lp8727_setup_irq(struct lp8727_chg *pchg)
 {
+	int ret;
+	int irq = pchg->client->irq;
+	unsigned delay_msec = pchg->pdata ? pchg->pdata->debounce_msec :
+						DEFAULT_DEBOUNCE_MSEC;
+
 	INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func);
 
-	pchg->irqthread = create_singlethread_workqueue("lp8727-irqthd");
-	if (!pchg->irqthread) {
-		dev_err(pchg->dev, "can not create thread for lp8727\n");
-		return -ENOMEM;
+	if (irq <= 0) {
+		dev_warn(pchg->dev, "invalid irq number: %d\n", irq);
+		return 0;
 	}
 
-	return request_threaded_irq(pchg->client->irq,
-				NULL,
-				lp8727_isr_func,
-				IRQF_TRIGGER_FALLING,
-				"lp8727_irq",
-				pchg);
+	ret = request_threaded_irq(irq,	NULL, lp8727_isr_func,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"lp8727_irq", pchg);
+
+	if (ret)
+		return ret;
+
+	pchg->irq = irq;
+	pchg->debounce_jiffies = msecs_to_jiffies(delay_msec);
+
+	return 0;
+}
+
+static void lp8727_release_irq(struct lp8727_chg *pchg)
+{
+	cancel_delayed_work_sync(&pchg->work);
+
+	if (pchg->irq)
+		free_irq(pchg->irq, pchg);
 }
 
 static enum power_supply_property lp8727_charger_prop[] = {
@@ -283,54 +312,82 @@
 {
 	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent);
 
-	if (psp == POWER_SUPPLY_PROP_ONLINE)
-		val->intval = lp8727_is_charger_attached(psy->name,
-							 pchg->devid);
+	if (psp != POWER_SUPPLY_PROP_ONLINE)
+		return -EINVAL;
+
+	val->intval = lp8727_is_charger_attached(psy->name, pchg->devid);
 
 	return 0;
 }
 
+static bool lp8727_is_high_temperature(enum lp8727_die_temp temp)
+{
+	switch (temp) {
+	case LP8788_TEMP_95C:
+	case LP8788_TEMP_115C:
+	case LP8788_TEMP_135C:
+		return true;
+	default:
+		return false;
+	}
+}
+
 static int lp8727_battery_get_property(struct power_supply *psy,
 				       enum power_supply_property psp,
 				       union power_supply_propval *val)
 {
 	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent);
+	struct lp8727_platform_data *pdata = pchg->pdata;
+	enum lp8727_die_temp temp;
 	u8 read;
 
 	switch (psp) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (lp8727_is_charger_attached(psy->name, pchg->devid)) {
-			lp8727_read_byte(pchg, STATUS1, &read);
-			if (((read & CHGSTAT) >> 4) == EOC)
-				val->intval = POWER_SUPPLY_STATUS_FULL;
-			else
-				val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		} else {
+		if (!lp8727_is_charger_attached(psy->name, pchg->devid)) {
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+			return 0;
 		}
+
+		lp8727_read_byte(pchg, LP8727_STATUS1, &read);
+
+		val->intval = (read & LP8727_CHGSTAT) == LP8727_STAT_EOC ?
+				POWER_SUPPLY_STATUS_FULL :
+				POWER_SUPPLY_STATUS_CHARGING;
 		break;
 	case POWER_SUPPLY_PROP_HEALTH:
-		lp8727_read_byte(pchg, STATUS2, &read);
-		read = (read & TEMP_STAT) >> 5;
-		if (read >= 0x1 && read <= 0x3)
-			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
-		else
-			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		lp8727_read_byte(pchg, LP8727_STATUS2, &read);
+		temp = (read & LP8727_TEMP_STAT) >> LP8727_TEMP_SHIFT;
+
+		val->intval = lp8727_is_high_temperature(temp) ?
+			POWER_SUPPLY_HEALTH_OVERHEAT :
+			POWER_SUPPLY_HEALTH_GOOD;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		if (pchg->pdata->get_batt_present)
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_present)
 			val->intval = pchg->pdata->get_batt_present();
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		if (pchg->pdata->get_batt_level)
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_level)
 			val->intval = pchg->pdata->get_batt_level();
 		break;
 	case POWER_SUPPLY_PROP_CAPACITY:
-		if (pchg->pdata->get_batt_capacity)
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_capacity)
 			val->intval = pchg->pdata->get_batt_capacity();
 		break;
 	case POWER_SUPPLY_PROP_TEMP:
-		if (pchg->pdata->get_batt_temp)
+		if (!pdata)
+			return -EINVAL;
+
+		if (pdata->get_batt_temp)
 			val->intval = pchg->pdata->get_batt_temp();
 		break;
 	default:
@@ -343,16 +400,20 @@
 static void lp8727_charger_changed(struct power_supply *psy)
 {
 	struct lp8727_chg *pchg = dev_get_drvdata(psy->dev->parent);
+	u8 eoc_level;
+	u8 ichg;
 	u8 val;
-	u8 eoc_level, ichg;
 
-	if (lp8727_is_charger_attached(psy->name, pchg->devid)) {
-		if (pchg->chg_parm) {
-			eoc_level = pchg->chg_parm->eoc_level;
-			ichg = pchg->chg_parm->ichg;
-			val = (ichg << 4) | eoc_level;
-			lp8727_write_byte(pchg, CHGCTRL2, val);
-		}
+	/* skip if no charger exists */
+	if (!lp8727_is_charger_attached(psy->name, pchg->devid))
+		return;
+
+	/* update charging parameters */
+	if (pchg->chg_param) {
+		eoc_level = pchg->chg_param->eoc_level;
+		ichg = pchg->chg_param->ichg;
+		val = (ichg << LP8727_ICHG_SHIFT) | eoc_level;
+		lp8727_write_byte(pchg, LP8727_CHGCTRL2, val);
 	}
 }
 
@@ -360,9 +421,9 @@
 {
 	struct lp8727_psy *psy;
 
-	psy = kzalloc(sizeof(*psy), GFP_KERNEL);
+	psy = devm_kzalloc(pchg->dev, sizeof(*psy), GFP_KERNEL);
 	if (!psy)
-		goto err_mem;
+		return -ENOMEM;
 
 	pchg->psy = psy;
 
@@ -375,7 +436,7 @@
 	psy->ac.num_supplicants = ARRAY_SIZE(battery_supplied_to);
 
 	if (power_supply_register(pchg->dev, &psy->ac))
-		goto err_psy;
+		goto err_psy_ac;
 
 	psy->usb.name = "usb";
 	psy->usb.type = POWER_SUPPLY_TYPE_USB;
@@ -386,7 +447,7 @@
 	psy->usb.num_supplicants = ARRAY_SIZE(battery_supplied_to);
 
 	if (power_supply_register(pchg->dev, &psy->usb))
-		goto err_psy;
+		goto err_psy_usb;
 
 	psy->batt.name = "main_batt";
 	psy->batt.type = POWER_SUPPLY_TYPE_BATTERY;
@@ -396,14 +457,15 @@
 	psy->batt.external_power_changed = lp8727_charger_changed;
 
 	if (power_supply_register(pchg->dev, &psy->batt))
-		goto err_psy;
+		goto err_psy_batt;
 
 	return 0;
 
-err_mem:
-	return -ENOMEM;
-err_psy:
-	kfree(psy);
+err_psy_batt:
+	power_supply_unregister(&psy->usb);
+err_psy_usb:
+	power_supply_unregister(&psy->ac);
+err_psy_ac:
 	return -EPERM;
 }
 
@@ -417,7 +479,6 @@
 	power_supply_unregister(&psy->ac);
 	power_supply_unregister(&psy->usb);
 	power_supply_unregister(&psy->batt);
-	kfree(psy);
 }
 
 static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
@@ -428,7 +489,7 @@
 	if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
 		return -EIO;
 
-	pchg = kzalloc(sizeof(*pchg), GFP_KERNEL);
+	pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL);
 	if (!pchg)
 		return -ENOMEM;
 
@@ -442,37 +503,31 @@
 	ret = lp8727_init_device(pchg);
 	if (ret) {
 		dev_err(pchg->dev, "i2c communication err: %d", ret);
-		goto error;
-	}
-
-	ret = lp8727_intr_config(pchg);
-	if (ret) {
-		dev_err(pchg->dev, "irq handler err: %d", ret);
-		goto error;
+		return ret;
 	}
 
 	ret = lp8727_register_psy(pchg);
 	if (ret) {
 		dev_err(pchg->dev, "power supplies register err: %d", ret);
-		goto error;
+		return ret;
+	}
+
+	ret = lp8727_setup_irq(pchg);
+	if (ret) {
+		dev_err(pchg->dev, "irq handler err: %d", ret);
+		lp8727_unregister_psy(pchg);
+		return ret;
 	}
 
 	return 0;
-
-error:
-	kfree(pchg);
-	return ret;
 }
 
 static int __devexit lp8727_remove(struct i2c_client *cl)
 {
 	struct lp8727_chg *pchg = i2c_get_clientdata(cl);
 
+	lp8727_release_irq(pchg);
 	lp8727_unregister_psy(pchg);
-	free_irq(pchg->client->irq, pchg);
-	flush_workqueue(pchg->irqthread);
-	destroy_workqueue(pchg->irqthread);
-	kfree(pchg);
 	return 0;
 }
 
@@ -493,6 +548,5 @@
 module_i2c_driver(lp8727_driver);
 
 MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver");
-MODULE_AUTHOR("Woogyom Kim <milo.kim@ti.com>, "
-	      "Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/power/lp8788-charger.c b/drivers/power/lp8788-charger.c
new file mode 100644
index 0000000..e852d12
--- /dev/null
+++ b/drivers/power/lp8788-charger.c
@@ -0,0 +1,795 @@
+/*
+ * TI LP8788 MFD - battery charger driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+/* register address */
+#define LP8788_CHG_STATUS		0x07
+#define LP8788_CHG_IDCIN		0x13
+#define LP8788_CHG_IBATT		0x14
+#define LP8788_CHG_VTERM		0x15
+#define LP8788_CHG_EOC			0x16
+
+/* mask/shift bits */
+#define LP8788_CHG_INPUT_STATE_M	0x03	/* Addr 07h */
+#define LP8788_CHG_STATE_M		0x3C
+#define LP8788_CHG_STATE_S		2
+#define LP8788_NO_BATT_M		BIT(6)
+#define LP8788_BAD_BATT_M		BIT(7)
+#define LP8788_CHG_IBATT_M		0x1F	/* Addr 14h */
+#define LP8788_CHG_VTERM_M		0x0F	/* Addr 15h */
+#define LP8788_CHG_EOC_LEVEL_M		0x30	/* Addr 16h */
+#define LP8788_CHG_EOC_LEVEL_S		4
+#define LP8788_CHG_EOC_TIME_M		0x0E
+#define LP8788_CHG_EOC_TIME_S		1
+#define LP8788_CHG_EOC_MODE_M		BIT(0)
+
+#define LP8788_CHARGER_NAME		"charger"
+#define LP8788_BATTERY_NAME		"main_batt"
+
+#define LP8788_CHG_START		0x11
+#define LP8788_CHG_END			0x1C
+
+#define LP8788_BUF_SIZE			40
+#define LP8788_ISEL_MAX			23
+#define LP8788_ISEL_STEP		50
+#define LP8788_VTERM_MIN		4100
+#define LP8788_VTERM_STEP		25
+#define LP8788_MAX_BATT_CAPACITY	100
+#define LP8788_MAX_CHG_IRQS		11
+
+enum lp8788_charging_state {
+	LP8788_OFF,
+	LP8788_WARM_UP,
+	LP8788_LOW_INPUT = 0x3,
+	LP8788_PRECHARGE,
+	LP8788_CC,
+	LP8788_CV,
+	LP8788_MAINTENANCE,
+	LP8788_BATTERY_FAULT,
+	LP8788_SYSTEM_SUPPORT = 0xC,
+	LP8788_HIGH_CURRENT = 0xF,
+	LP8788_MAX_CHG_STATE,
+};
+
+enum lp8788_charger_adc_sel {
+	LP8788_VBATT,
+	LP8788_BATT_TEMP,
+	LP8788_NUM_CHG_ADC,
+};
+
+enum lp8788_charger_input_state {
+	LP8788_SYSTEM_SUPPLY = 1,
+	LP8788_FULL_FUNCTION,
+};
+
+/*
+ * struct lp8788_chg_irq
+ * @which        : lp8788 interrupt id
+ * @virq         : Linux IRQ number from irq_domain
+ */
+struct lp8788_chg_irq {
+	enum lp8788_int_id which;
+	int virq;
+};
+
+/*
+ * struct lp8788_charger
+ * @lp           : used for accessing the registers of mfd lp8788 device
+ * @charger      : power supply driver for the battery charger
+ * @battery      : power supply driver for the battery
+ * @charger_work : work queue for charger input interrupts
+ * @chan         : iio channels for getting adc values
+ *                 eg) battery voltage, capacity and temperature
+ * @irqs         : charger dedicated interrupts
+ * @num_irqs     : total numbers of charger interrupts
+ * @pdata        : charger platform specific data
+ */
+struct lp8788_charger {
+	struct lp8788 *lp;
+	struct power_supply charger;
+	struct power_supply battery;
+	struct work_struct charger_work;
+	struct iio_channel *chan[LP8788_NUM_CHG_ADC];
+	struct lp8788_chg_irq irqs[LP8788_MAX_CHG_IRQS];
+	int num_irqs;
+	struct lp8788_charger_platform_data *pdata;
+};
+
+static char *battery_supplied_to[] = {
+	LP8788_BATTERY_NAME,
+};
+
+static enum power_supply_property lp8788_charger_prop[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static enum power_supply_property lp8788_battery_prop[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static bool lp8788_is_charger_detected(struct lp8788_charger *pchg)
+{
+	u8 data;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	data &= LP8788_CHG_INPUT_STATE_M;
+
+	return data == LP8788_SYSTEM_SUPPLY || data == LP8788_FULL_FUNCTION;
+}
+
+static int lp8788_charger_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(psy->dev->parent);
+	u8 read;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = lp8788_is_charger_detected(pchg);
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_MAX:
+		lp8788_read_byte(pchg->lp, LP8788_CHG_IDCIN, &read);
+		val->intval = LP8788_ISEL_STEP *
+				(min_t(int, read, LP8788_ISEL_MAX) + 1);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_status(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	enum lp8788_charging_state state;
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+	switch (state) {
+	case LP8788_OFF:
+		val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case LP8788_PRECHARGE:
+	case LP8788_CC:
+	case LP8788_CV:
+	case LP8788_HIGH_CURRENT:
+		val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		break;
+	case LP8788_MAINTENANCE:
+		val->intval = POWER_SUPPLY_STATUS_FULL;
+		break;
+	default:
+		val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		break;
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_health(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	if (data & LP8788_NO_BATT_M)
+		val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+	else if (data & LP8788_BAD_BATT_M)
+		val->intval = POWER_SUPPLY_HEALTH_DEAD;
+	else
+		val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+	return 0;
+}
+
+static int lp8788_get_battery_present(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 data;
+	int ret;
+
+	ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	val->intval = !(data & LP8788_NO_BATT_M);
+	return 0;
+}
+
+static int lp8788_get_vbatt_adc(struct lp8788_charger *pchg,
+				unsigned int *result)
+{
+	struct iio_channel *channel = pchg->chan[LP8788_VBATT];
+	int scaleint;
+	int scalepart;
+	int ret;
+
+	if (!channel)
+		return -EINVAL;
+
+	ret = iio_read_channel_scale(channel, &scaleint, &scalepart);
+	if (ret != IIO_VAL_INT_PLUS_MICRO)
+		return -EINVAL;
+
+	/* unit: mV */
+	*result = (scaleint + scalepart * 1000000) / 1000;
+
+	return 0;
+}
+
+static int lp8788_get_battery_voltage(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	return lp8788_get_vbatt_adc(pchg, &val->intval);
+}
+
+static int lp8788_get_battery_capacity(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	struct lp8788 *lp = pchg->lp;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	unsigned int max_vbatt;
+	unsigned int vbatt;
+	enum lp8788_charging_state state;
+	u8 data;
+	int ret;
+
+	if (!pdata)
+		return -EINVAL;
+
+	max_vbatt = pdata->max_vbatt_mv;
+	if (max_vbatt == 0)
+		return -EINVAL;
+
+	ret = lp8788_read_byte(lp, LP8788_CHG_STATUS, &data);
+	if (ret)
+		return ret;
+
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+	if (state == LP8788_MAINTENANCE) {
+		val->intval = LP8788_MAX_BATT_CAPACITY;
+	} else {
+		ret = lp8788_get_vbatt_adc(pchg, &vbatt);
+		if (ret)
+			return ret;
+
+		val->intval = (vbatt * LP8788_MAX_BATT_CAPACITY) / max_vbatt;
+		val->intval = min(val->intval, LP8788_MAX_BATT_CAPACITY);
+	}
+
+	return 0;
+}
+
+static int lp8788_get_battery_temperature(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	struct iio_channel *channel = pchg->chan[LP8788_BATT_TEMP];
+	int scaleint;
+	int scalepart;
+	int ret;
+
+	if (!channel)
+		return -EINVAL;
+
+	ret = iio_read_channel_scale(channel, &scaleint, &scalepart);
+	if (ret != IIO_VAL_INT_PLUS_MICRO)
+		return -EINVAL;
+
+	/* unit: 0.1 'C */
+	val->intval = (scaleint + scalepart * 1000000) / 100;
+
+	return 0;
+}
+
+static int lp8788_get_battery_charging_current(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 read;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_IBATT, &read);
+	read &= LP8788_CHG_IBATT_M;
+	val->intval = LP8788_ISEL_STEP *
+			(min_t(int, read, LP8788_ISEL_MAX) + 1);
+
+	return 0;
+}
+
+static int lp8788_get_charging_termination_voltage(struct lp8788_charger *pchg,
+				union power_supply_propval *val)
+{
+	u8 read;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_VTERM, &read);
+	read &= LP8788_CHG_VTERM_M;
+	val->intval = LP8788_VTERM_MIN + LP8788_VTERM_STEP * read;
+
+	return 0;
+}
+
+static int lp8788_battery_get_property(struct power_supply *psy,
+					enum power_supply_property psp,
+					union power_supply_propval *val)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(psy->dev->parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		return lp8788_get_battery_status(pchg, val);
+	case POWER_SUPPLY_PROP_HEALTH:
+		return lp8788_get_battery_health(pchg, val);
+	case POWER_SUPPLY_PROP_PRESENT:
+		return lp8788_get_battery_present(pchg, val);
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		return lp8788_get_battery_voltage(pchg, val);
+	case POWER_SUPPLY_PROP_CAPACITY:
+		return lp8788_get_battery_capacity(pchg, val);
+	case POWER_SUPPLY_PROP_TEMP:
+		return lp8788_get_battery_temperature(pchg, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+		return lp8788_get_battery_charging_current(pchg, val);
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+		return lp8788_get_charging_termination_voltage(pchg, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static inline bool lp8788_is_valid_charger_register(u8 addr)
+{
+	return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END;
+}
+
+static int lp8788_update_charger_params(struct lp8788_charger *pchg)
+{
+	struct lp8788 *lp = pchg->lp;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	struct lp8788_chg_param *param;
+	int i;
+	int ret;
+
+	if (!pdata || !pdata->chg_params) {
+		dev_info(lp->dev, "skip updating charger parameters\n");
+		return 0;
+	}
+
+	/* settting charging parameters */
+	for (i = 0; i < pdata->num_chg_params; i++) {
+		param = pdata->chg_params + i;
+
+		if (!param)
+			continue;
+
+		if (lp8788_is_valid_charger_register(param->addr)) {
+			ret = lp8788_write_byte(lp, param->addr, param->val);
+			if (ret)
+				return ret;
+		}
+	}
+
+	return 0;
+}
+
+static int lp8788_psy_register(struct platform_device *pdev,
+				struct lp8788_charger *pchg)
+{
+	pchg->charger.name = LP8788_CHARGER_NAME;
+	pchg->charger.type = POWER_SUPPLY_TYPE_MAINS;
+	pchg->charger.properties = lp8788_charger_prop;
+	pchg->charger.num_properties = ARRAY_SIZE(lp8788_charger_prop);
+	pchg->charger.get_property = lp8788_charger_get_property;
+	pchg->charger.supplied_to = battery_supplied_to;
+	pchg->charger.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+	if (power_supply_register(&pdev->dev, &pchg->charger))
+		return -EPERM;
+
+	pchg->battery.name = LP8788_BATTERY_NAME;
+	pchg->battery.type = POWER_SUPPLY_TYPE_BATTERY;
+	pchg->battery.properties = lp8788_battery_prop;
+	pchg->battery.num_properties = ARRAY_SIZE(lp8788_battery_prop);
+	pchg->battery.get_property = lp8788_battery_get_property;
+
+	if (power_supply_register(&pdev->dev, &pchg->battery))
+		return -EPERM;
+
+	return 0;
+}
+
+static void lp8788_psy_unregister(struct lp8788_charger *pchg)
+{
+	power_supply_unregister(&pchg->battery);
+	power_supply_unregister(&pchg->charger);
+}
+
+static void lp8788_charger_event(struct work_struct *work)
+{
+	struct lp8788_charger *pchg =
+		container_of(work, struct lp8788_charger, charger_work);
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	enum lp8788_charger_event event = lp8788_is_charger_detected(pchg);
+
+	pdata->charger_event(pchg->lp, event);
+}
+
+static bool lp8788_find_irq_id(struct lp8788_charger *pchg, int virq, int *id)
+{
+	bool found;
+	int i;
+
+	for (i = 0; i < pchg->num_irqs; i++) {
+		if (pchg->irqs[i].virq == virq) {
+			*id = pchg->irqs[i].which;
+			found = true;
+			break;
+		}
+	}
+
+	return found;
+}
+
+static irqreturn_t lp8788_charger_irq_thread(int virq, void *ptr)
+{
+	struct lp8788_charger *pchg = ptr;
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	int id = -1;
+
+	if (!lp8788_find_irq_id(pchg, virq, &id))
+		return IRQ_NONE;
+
+	switch (id) {
+	case LP8788_INT_CHG_INPUT_STATE:
+	case LP8788_INT_CHG_STATE:
+	case LP8788_INT_EOC:
+	case LP8788_INT_BATT_LOW:
+	case LP8788_INT_NO_BATT:
+		power_supply_changed(&pchg->charger);
+		power_supply_changed(&pchg->battery);
+		break;
+	default:
+		break;
+	}
+
+	/* report charger dectection event if used */
+	if (!pdata)
+		goto irq_handled;
+
+	if (pdata->charger_event && id == LP8788_INT_CHG_INPUT_STATE)
+		schedule_work(&pchg->charger_work);
+
+irq_handled:
+	return IRQ_HANDLED;
+}
+
+static int lp8788_set_irqs(struct platform_device *pdev,
+			struct lp8788_charger *pchg, const char *name)
+{
+	struct resource *r;
+	struct irq_domain *irqdm = pchg->lp->irqdm;
+	int irq_start;
+	int irq_end;
+	int virq;
+	int nr_irq;
+	int i;
+	int ret;
+
+	/* no error even if no irq resource */
+	r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, name);
+	if (!r)
+		return 0;
+
+	irq_start = r->start;
+	irq_end = r->end;
+
+	for (i = irq_start; i <= irq_end; i++) {
+		nr_irq = pchg->num_irqs;
+
+		virq = irq_create_mapping(irqdm, i);
+		pchg->irqs[nr_irq].virq = virq;
+		pchg->irqs[nr_irq].which = i;
+		pchg->num_irqs++;
+
+		ret = request_threaded_irq(virq, NULL,
+					lp8788_charger_irq_thread,
+					0, name, pchg);
+		if (ret)
+			break;
+	}
+
+	if (i <= irq_end)
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	for (i = 0; i < pchg->num_irqs; i++)
+		free_irq(pchg->irqs[i].virq, pchg);
+	return ret;
+}
+
+static int lp8788_irq_register(struct platform_device *pdev,
+				struct lp8788_charger *pchg)
+{
+	struct lp8788 *lp = pchg->lp;
+	const char *name[] = {
+		LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ
+	};
+	int i;
+	int ret;
+
+	INIT_WORK(&pchg->charger_work, lp8788_charger_event);
+	pchg->num_irqs = 0;
+
+	for (i = 0; i < ARRAY_SIZE(name); i++) {
+		ret = lp8788_set_irqs(pdev, pchg, name[i]);
+		if (ret) {
+			dev_warn(lp->dev, "irq setup failed: %s\n", name[i]);
+			return ret;
+		}
+	}
+
+	if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) {
+		dev_err(lp->dev, "invalid total number of irqs: %d\n",
+			pchg->num_irqs);
+		return -EINVAL;
+	}
+
+
+	return 0;
+}
+
+static void lp8788_irq_unregister(struct platform_device *pdev,
+				  struct lp8788_charger *pchg)
+{
+	int i;
+	int irq;
+
+	for (i = 0; i < pchg->num_irqs; i++) {
+		irq = pchg->irqs[i].virq;
+		if (!irq)
+			continue;
+
+		free_irq(irq, pchg);
+	}
+}
+
+static void lp8788_setup_adc_channel(struct lp8788_charger *pchg)
+{
+	struct lp8788_charger_platform_data *pdata = pchg->pdata;
+	struct device *dev = pchg->lp->dev;
+	struct iio_channel *chan;
+	enum lp8788_adc_id id;
+	const char *chan_name[LPADC_MAX] = {
+		[LPADC_VBATT_5P5] = "vbatt-5p5",
+		[LPADC_VBATT_6P0] = "vbatt-6p0",
+		[LPADC_VBATT_5P0] = "vbatt-5p0",
+		[LPADC_ADC1]      = "adc1",
+		[LPADC_ADC2]      = "adc2",
+		[LPADC_ADC3]      = "adc3",
+		[LPADC_ADC4]      = "adc4",
+	};
+
+	if (!pdata)
+		return;
+
+	id = pdata->vbatt_adc;
+	switch (id) {
+	case LPADC_VBATT_5P5:
+	case LPADC_VBATT_6P0:
+	case LPADC_VBATT_5P0:
+		chan = iio_channel_get(NULL, chan_name[id]);
+		pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
+		break;
+	default:
+		dev_err(dev, "invalid ADC id for VBATT: %d\n", id);
+		pchg->chan[LP8788_VBATT] = NULL;
+		break;
+	}
+
+	id = pdata->batt_temp_adc;
+	switch (id) {
+	case LPADC_ADC1:
+	case LPADC_ADC2:
+	case LPADC_ADC3:
+	case LPADC_ADC4:
+		chan = iio_channel_get(NULL, chan_name[id]);
+		pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
+		break;
+	default:
+		dev_err(dev, "invalid ADC id for BATT_TEMP : %d\n", id);
+		pchg->chan[LP8788_BATT_TEMP] = NULL;
+		break;
+	}
+}
+
+static void lp8788_release_adc_channel(struct lp8788_charger *pchg)
+{
+	int i;
+
+	for (i = 0; i < LP8788_NUM_CHG_ADC; i++) {
+		if (!pchg->chan[i])
+			continue;
+
+		iio_channel_release(pchg->chan[i]);
+		pchg->chan[i] = NULL;
+	}
+}
+
+static ssize_t lp8788_show_charger_status(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	enum lp8788_charging_state state;
+	char *desc[LP8788_MAX_CHG_STATE] = {
+		[LP8788_OFF] = "CHARGER OFF",
+		[LP8788_WARM_UP] = "WARM UP",
+		[LP8788_LOW_INPUT] = "LOW INPUT STATE",
+		[LP8788_PRECHARGE] = "CHARGING - PRECHARGE",
+		[LP8788_CC] = "CHARGING - CC",
+		[LP8788_CV] = "CHARGING - CV",
+		[LP8788_MAINTENANCE] = "NO CHARGING - MAINTENANCE",
+		[LP8788_BATTERY_FAULT] = "BATTERY FAULT",
+		[LP8788_SYSTEM_SUPPORT] = "SYSTEM SUPPORT",
+		[LP8788_HIGH_CURRENT] = "HIGH CURRENT",
+	};
+	u8 data;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+	state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+	return scnprintf(buf, LP8788_BUF_SIZE, "%s\n", desc[state]);
+}
+
+static ssize_t lp8788_show_eoc_time(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	char *stime[] = { "400ms", "5min", "10min", "15min",
+			"20min", "25min", "30min" "No timeout" };
+	u8 val;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+	val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S;
+
+	return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Time: %s\n",
+			stime[val]);
+}
+
+static ssize_t lp8788_show_eoc_level(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct lp8788_charger *pchg = dev_get_drvdata(dev);
+	char *abs_level[] = { "25mA", "49mA", "75mA", "98mA" };
+	char *relative_level[] = { "5%", "10%", "15%", "20%" };
+	char *level;
+	u8 val;
+	u8 mode;
+
+	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+
+	mode = val & LP8788_CHG_EOC_MODE_M;
+	val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S;
+	level = mode ? abs_level[val] : relative_level[val];
+
+	return scnprintf(buf, LP8788_BUF_SIZE, "End Of Charge Level: %s\n",
+			level);
+}
+
+static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL);
+static DEVICE_ATTR(eoc_time, S_IRUSR, lp8788_show_eoc_time, NULL);
+static DEVICE_ATTR(eoc_level, S_IRUSR, lp8788_show_eoc_level, NULL);
+
+static struct attribute *lp8788_charger_attr[] = {
+	&dev_attr_charger_status.attr,
+	&dev_attr_eoc_time.attr,
+	&dev_attr_eoc_level.attr,
+	NULL,
+};
+
+static const struct attribute_group lp8788_attr_group = {
+	.attrs = lp8788_charger_attr,
+};
+
+static __devinit int lp8788_charger_probe(struct platform_device *pdev)
+{
+	struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+	struct lp8788_charger *pchg;
+	int ret;
+
+	pchg = devm_kzalloc(lp->dev, sizeof(struct lp8788_charger), GFP_KERNEL);
+	if (!pchg)
+		return -ENOMEM;
+
+	pchg->lp = lp;
+	pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL;
+	platform_set_drvdata(pdev, pchg);
+
+	ret = lp8788_update_charger_params(pchg);
+	if (ret)
+		return ret;
+
+	lp8788_setup_adc_channel(pchg);
+
+	ret = lp8788_psy_register(pdev, pchg);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&pdev->dev.kobj, &lp8788_attr_group);
+	if (ret) {
+		lp8788_psy_unregister(pchg);
+		return ret;
+	}
+
+	ret = lp8788_irq_register(pdev, pchg);
+	if (ret)
+		dev_warn(lp->dev, "failed to register charger irq: %d\n", ret);
+
+	return 0;
+}
+
+static int __devexit lp8788_charger_remove(struct platform_device *pdev)
+{
+	struct lp8788_charger *pchg = platform_get_drvdata(pdev);
+
+	flush_work(&pchg->charger_work);
+	lp8788_irq_unregister(pdev, pchg);
+	sysfs_remove_group(&pdev->dev.kobj, &lp8788_attr_group);
+	lp8788_psy_unregister(pchg);
+	lp8788_release_adc_channel(pchg);
+
+	return 0;
+}
+
+static struct platform_driver lp8788_charger_driver = {
+	.probe = lp8788_charger_probe,
+	.remove = __devexit_p(lp8788_charger_remove),
+	.driver = {
+		.name = LP8788_DEV_CHARGER,
+		.owner = THIS_MODULE,
+	},
+};
+module_platform_driver(lp8788_charger_driver);
+
+MODULE_DESCRIPTION("TI LP8788 Charger Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-charger");
diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c
index 7312f26..7df7c5f 100644
--- a/drivers/power/pda_power.c
+++ b/drivers/power/pda_power.c
@@ -281,6 +281,12 @@
 			goto init_failed;
 	}
 
+	ac_draw = regulator_get(dev, "ac_draw");
+	if (IS_ERR(ac_draw)) {
+		dev_dbg(dev, "couldn't get ac_draw regulator\n");
+		ac_draw = NULL;
+	}
+
 	update_status();
 	update_charger();
 
@@ -309,13 +315,6 @@
 		pda_psy_usb.num_supplicants = pdata->num_supplicants;
 	}
 
-	ac_draw = regulator_get(dev, "ac_draw");
-	if (IS_ERR(ac_draw)) {
-		dev_dbg(dev, "couldn't get ac_draw regulator\n");
-		ac_draw = NULL;
-		ret = PTR_ERR(ac_draw);
-	}
-
 #ifdef CONFIG_USB_OTG_UTILS
 	transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
 	if (!IS_ERR_OR_NULL(transceiver)) {
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index 1d96614..395c2cf 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -138,6 +138,7 @@
 	POWER_SUPPLY_ATTR(health),
 	POWER_SUPPLY_ATTR(present),
 	POWER_SUPPLY_ATTR(online),
+	POWER_SUPPLY_ATTR(authentic),
 	POWER_SUPPLY_ATTR(technology),
 	POWER_SUPPLY_ATTR(cycle_count),
 	POWER_SUPPLY_ATTR(voltage_max),
@@ -160,7 +161,9 @@
 	POWER_SUPPLY_ATTR(charge_avg),
 	POWER_SUPPLY_ATTR(charge_counter),
 	POWER_SUPPLY_ATTR(constant_charge_current),
+	POWER_SUPPLY_ATTR(constant_charge_current_max),
 	POWER_SUPPLY_ATTR(constant_charge_voltage),
+	POWER_SUPPLY_ATTR(constant_charge_voltage_max),
 	POWER_SUPPLY_ATTR(energy_full_design),
 	POWER_SUPPLY_ATTR(energy_empty_design),
 	POWER_SUPPLY_ATTR(energy_full),
diff --git a/drivers/power/sbs-battery.c b/drivers/power/sbs-battery.c
index a65e8f5..4146596 100644
--- a/drivers/power/sbs-battery.c
+++ b/drivers/power/sbs-battery.c
@@ -759,6 +759,16 @@
 	chip->irq = irq;
 
 skip_gpio:
+	/*
+	 * Before we register, we need to make sure we can actually talk
+	 * to the battery.
+	 */
+	rc = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+	if (rc < 0) {
+		dev_err(&client->dev, "%s: Failed to get device status\n",
+			__func__);
+		goto exit_psupply;
+	}
 
 	rc = power_supply_register(&client->dev, &chip->power_supply);
 	if (rc) {
diff --git a/drivers/power/smb347-charger.c b/drivers/power/smb347-charger.c
index 332dd01..a9707c1 100644
--- a/drivers/power/smb347-charger.c
+++ b/drivers/power/smb347-charger.c
@@ -80,6 +80,7 @@
 #define CFG_FAULT_IRQ_DCIN_UV			BIT(2)
 #define CFG_STATUS_IRQ				0x0d
 #define CFG_STATUS_IRQ_TERMINATION_OR_TAPER	BIT(4)
+#define CFG_STATUS_IRQ_CHARGE_TIMEOUT		BIT(7)
 #define CFG_ADDRESS				0x0e
 
 /* Command registers */
@@ -96,6 +97,9 @@
 #define IRQSTAT_C_TERMINATION_STAT		BIT(0)
 #define IRQSTAT_C_TERMINATION_IRQ		BIT(1)
 #define IRQSTAT_C_TAPER_IRQ			BIT(3)
+#define IRQSTAT_D				0x38
+#define IRQSTAT_D_CHARGE_TIMEOUT_STAT		BIT(2)
+#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ		BIT(3)
 #define IRQSTAT_E				0x39
 #define IRQSTAT_E_USBIN_UV_STAT			BIT(0)
 #define IRQSTAT_E_USBIN_UV_IRQ			BIT(1)
@@ -109,8 +113,10 @@
 #define STAT_B					0x3c
 #define STAT_C					0x3d
 #define STAT_C_CHG_ENABLED			BIT(0)
+#define STAT_C_HOLDOFF_STAT			BIT(3)
 #define STAT_C_CHG_MASK				0x06
 #define STAT_C_CHG_SHIFT			1
+#define STAT_C_CHG_TERM				BIT(5)
 #define STAT_C_CHARGER_ERROR			BIT(6)
 #define STAT_E					0x3f
 
@@ -701,7 +707,7 @@
 static irqreturn_t smb347_interrupt(int irq, void *data)
 {
 	struct smb347_charger *smb = data;
-	unsigned int stat_c, irqstat_e, irqstat_c;
+	unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e;
 	bool handled = false;
 	int ret;
 
@@ -717,6 +723,12 @@
 		return IRQ_NONE;
 	}
 
+	ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d);
+	if (ret < 0) {
+		dev_warn(smb->dev, "reading IRQSTAT_D failed\n");
+		return IRQ_NONE;
+	}
+
 	ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e);
 	if (ret < 0) {
 		dev_warn(smb->dev, "reading IRQSTAT_E failed\n");
@@ -724,13 +736,11 @@
 	}
 
 	/*
-	 * If we get charger error we report the error back to user and
-	 * disable charging.
+	 * If we get charger error we report the error back to user.
+	 * If the error is recovered charging will resume again.
 	 */
 	if (stat_c & STAT_C_CHARGER_ERROR) {
-		dev_err(smb->dev, "error in charger, disabling charging\n");
-
-		smb347_charging_disable(smb);
+		dev_err(smb->dev, "charging stopped due to charger error\n");
 		power_supply_changed(&smb->battery);
 		handled = true;
 	}
@@ -743,6 +753,20 @@
 	if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
 		if (irqstat_c & IRQSTAT_C_TERMINATION_STAT)
 			power_supply_changed(&smb->battery);
+		dev_dbg(smb->dev, "going to HW maintenance mode\n");
+		handled = true;
+	}
+
+	/*
+	 * If we got a charger timeout INT that means the charge
+	 * full is not detected with in charge timeout value.
+	 */
+	if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) {
+		dev_dbg(smb->dev, "total Charge Timeout INT received\n");
+
+		if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
+			dev_warn(smb->dev, "charging stopped due to timeout\n");
+		power_supply_changed(&smb->battery);
 		handled = true;
 	}
 
@@ -776,6 +800,7 @@
 	 * Enable/disable interrupts for:
 	 *	- under voltage
 	 *	- termination current reached
+	 *	- charger timeout
 	 *	- charger error
 	 */
 	ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff,
@@ -784,7 +809,8 @@
 		goto fail;
 
 	ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff,
-			enable ? CFG_STATUS_IRQ_TERMINATION_OR_TAPER : 0);
+			enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER |
+					CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0);
 	if (ret < 0)
 		goto fail;
 
@@ -988,6 +1014,51 @@
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
 };
 
+static int smb347_get_charging_status(struct smb347_charger *smb)
+{
+	int ret, status;
+	unsigned int val;
+
+	if (!smb347_is_ps_online(smb))
+		return POWER_SUPPLY_STATUS_DISCHARGING;
+
+	ret = regmap_read(smb->regmap, STAT_C, &val);
+	if (ret < 0)
+		return ret;
+
+	if ((val & STAT_C_CHARGER_ERROR) ||
+			(val & STAT_C_HOLDOFF_STAT)) {
+		/*
+		 * set to NOT CHARGING upon charger error
+		 * or charging has stopped.
+		 */
+		status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	} else {
+		if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) {
+			/*
+			 * set to charging if battery is in pre-charge,
+			 * fast charge or taper charging mode.
+			 */
+			status = POWER_SUPPLY_STATUS_CHARGING;
+		} else if (val & STAT_C_CHG_TERM) {
+			/*
+			 * set the status to FULL if battery is not in pre
+			 * charge, fast charge or taper charging mode AND
+			 * charging is terminated at least once.
+			 */
+			status = POWER_SUPPLY_STATUS_FULL;
+		} else {
+			/*
+			 * in this case no charger error or termination
+			 * occured but charging is not in progress!!!
+			 */
+			status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+		}
+	}
+
+	return status;
+}
+
 static int smb347_battery_get_property(struct power_supply *psy,
 				       enum power_supply_property prop,
 				       union power_supply_propval *val)
@@ -1003,14 +1074,10 @@
 
 	switch (prop) {
 	case POWER_SUPPLY_PROP_STATUS:
-		if (!smb347_is_ps_online(smb)) {
-			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
-			break;
-		}
-		if (smb347_charging_status(smb))
-			val->intval = POWER_SUPPLY_STATUS_CHARGING;
-		else
-			val->intval = POWER_SUPPLY_STATUS_FULL;
+		ret = smb347_get_charging_status(smb);
+		if (ret < 0)
+			return ret;
+		val->intval = ret;
 		break;
 
 	case POWER_SUPPLY_PROP_CHARGE_TYPE:
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 15f4d5d..f9e70cf 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -41,16 +41,16 @@
 #define TWL4030_STS_VBUS	BIT(7)
 #define TWL4030_STS_USB_ID	BIT(2)
 #define TWL4030_BBCHEN		BIT(4)
-#define TWL4030_BBSEL_MASK	0b1100
-#define TWL4030_BBSEL_2V5	0b0000
-#define TWL4030_BBSEL_3V0	0b0100
-#define TWL4030_BBSEL_3V1	0b1000
-#define TWL4030_BBSEL_3V2	0b1100
-#define TWL4030_BBISEL_MASK	0b11
-#define TWL4030_BBISEL_25uA	0b00
-#define TWL4030_BBISEL_150uA	0b01
-#define TWL4030_BBISEL_500uA	0b10
-#define TWL4030_BBISEL_1000uA	0b11
+#define TWL4030_BBSEL_MASK	0x0c
+#define TWL4030_BBSEL_2V5	0x00
+#define TWL4030_BBSEL_3V0	0x04
+#define TWL4030_BBSEL_3V1	0x08
+#define TWL4030_BBSEL_3V2	0x0c
+#define TWL4030_BBISEL_MASK	0x03
+#define TWL4030_BBISEL_25uA	0x00
+#define TWL4030_BBISEL_150uA	0x01
+#define TWL4030_BBISEL_500uA	0x02
+#define TWL4030_BBISEL_1000uA	0x03
 
 /* BCI interrupts */
 #define TWL4030_WOVF		BIT(0) /* Watchdog overflow */
@@ -534,7 +534,8 @@
 	}
 
 	ret = request_threaded_irq(bci->irq_chg, NULL,
-			twl4030_charger_interrupt, 0, pdev->name, bci);
+			twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
+			bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_chg, ret);
@@ -542,7 +543,7 @@
 	}
 
 	ret = request_threaded_irq(bci->irq_bci, NULL,
-			twl4030_bci_interrupt, 0, pdev->name, bci);
+			twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "could not request irq %d, status %d\n",
 			bci->irq_bci, ret);
diff --git a/drivers/power/wm97xx_battery.c b/drivers/power/wm97xx_battery.c
index d2d4c08..0ba331a 100644
--- a/drivers/power/wm97xx_battery.c
+++ b/drivers/power/wm97xx_battery.c
@@ -212,8 +212,10 @@
 		props++;	/* POWER_SUPPLY_PROP_VOLTAGE_MIN */
 
 	prop = kzalloc(props * sizeof(*prop), GFP_KERNEL);
-	if (!prop)
+	if (!prop) {
+		ret = -ENOMEM;
 		goto err3;
+	}
 
 	prop[i++] = POWER_SUPPLY_PROP_PRESENT;
 	if (pdata->charge_gpio >= 0)
diff --git a/include/linux/mfd/88pm860x.h b/include/linux/mfd/88pm860x.h
index 7b24943..b7c5a3c 100644
--- a/include/linux/mfd/88pm860x.h
+++ b/include/linux/mfd/88pm860x.h
@@ -55,6 +55,21 @@
 #define PM8606_DCM_BOOST		(0x00)
 #define PM8606_PWM			(0x01)
 
+#define PM8607_MISC2			(0x42)
+
+/* Power Up Log Register */
+#define PM8607_POWER_UP_LOG		(0x3F)
+
+/* Charger Control Registers */
+#define PM8607_CCNT			(0x47)
+#define PM8607_CHG_CTRL1		(0x48)
+#define PM8607_CHG_CTRL2		(0x49)
+#define PM8607_CHG_CTRL3		(0x4A)
+#define PM8607_CHG_CTRL4		(0x4B)
+#define PM8607_CHG_CTRL5		(0x4C)
+#define PM8607_CHG_CTRL6		(0x4D)
+#define PM8607_CHG_CTRL7		(0x4E)
+
 /* Backlight Registers */
 #define PM8606_WLED1A			(0x02)
 #define PM8606_WLED1B			(0x03)
@@ -205,6 +220,71 @@
 #define PM8607_PD_PREBIAS		(0x56)	/* prebias time */
 #define PM8607_GPADC_MISC1		(0x57)
 
+/* bit definitions of  MEAS_EN1*/
+#define PM8607_MEAS_EN1_VBAT		(1 << 0)
+#define PM8607_MEAS_EN1_VCHG		(1 << 1)
+#define PM8607_MEAS_EN1_VSYS		(1 << 2)
+#define PM8607_MEAS_EN1_TINT		(1 << 3)
+#define PM8607_MEAS_EN1_RFTMP		(1 << 4)
+#define PM8607_MEAS_EN1_TBAT		(1 << 5)
+#define PM8607_MEAS_EN1_GPADC2		(1 << 6)
+#define PM8607_MEAS_EN1_GPADC3		(1 << 7)
+
+/* Battery Monitor Registers */
+#define PM8607_GP_BIAS2			(0x5A)
+#define PM8607_VBAT_LOWTH		(0x5B)
+#define PM8607_VCHG_LOWTH		(0x5C)
+#define PM8607_VSYS_LOWTH		(0x5D)
+#define PM8607_TINT_LOWTH		(0x5E)
+#define PM8607_GPADC0_LOWTH		(0x5F)
+#define PM8607_GPADC1_LOWTH		(0x60)
+#define PM8607_GPADC2_LOWTH		(0x61)
+#define PM8607_GPADC3_LOWTH		(0x62)
+#define PM8607_VBAT_HIGHTH		(0x63)
+#define PM8607_VCHG_HIGHTH		(0x64)
+#define PM8607_VSYS_HIGHTH		(0x65)
+#define PM8607_TINT_HIGHTH		(0x66)
+#define PM8607_GPADC0_HIGHTH		(0x67)
+#define PM8607_GPADC1_HIGHTH		(0x68)
+#define PM8607_GPADC2_HIGHTH		(0x69)
+#define PM8607_GPADC3_HIGHTH		(0x6A)
+#define PM8607_IBAT_MEAS1		(0x6B)
+#define PM8607_IBAT_MEAS2		(0x6C)
+#define PM8607_VBAT_MEAS1		(0x6D)
+#define PM8607_VBAT_MEAS2		(0x6E)
+#define PM8607_VCHG_MEAS1		(0x6F)
+#define PM8607_VCHG_MEAS2		(0x70)
+#define PM8607_VSYS_MEAS1		(0x71)
+#define PM8607_VSYS_MEAS2		(0x72)
+#define PM8607_TINT_MEAS1		(0x73)
+#define PM8607_TINT_MEAS2		(0x74)
+#define PM8607_GPADC0_MEAS1		(0x75)
+#define PM8607_GPADC0_MEAS2		(0x76)
+#define PM8607_GPADC1_MEAS1		(0x77)
+#define PM8607_GPADC1_MEAS2		(0x78)
+#define PM8607_GPADC2_MEAS1		(0x79)
+#define PM8607_GPADC2_MEAS2		(0x7A)
+#define PM8607_GPADC3_MEAS1		(0x7B)
+#define PM8607_GPADC3_MEAS2		(0x7C)
+#define PM8607_CCNT_MEAS1		(0x95)
+#define PM8607_CCNT_MEAS2		(0x96)
+#define PM8607_VBAT_AVG			(0x97)
+#define PM8607_VCHG_AVG			(0x98)
+#define PM8607_VSYS_AVG			(0x99)
+#define PM8607_VBAT_MIN			(0x9A)
+#define PM8607_VCHG_MIN			(0x9B)
+#define PM8607_VSYS_MIN			(0x9C)
+#define PM8607_VBAT_MAX			(0x9D)
+#define PM8607_VCHG_MAX			(0x9E)
+#define PM8607_VSYS_MAX			(0x9F)
+
+#define PM8607_GPADC_MISC2		(0x59)
+#define PM8607_GPADC0_GP_BIAS_A0	(1 << 0)
+#define PM8607_GPADC1_GP_BIAS_A1	(1 << 1)
+#define PM8607_GPADC2_GP_BIAS_A2	(1 << 2)
+#define PM8607_GPADC3_GP_BIAS_A3	(1 << 3)
+#define PM8607_GPADC2_GP_BIAS_OUT2	(1 << 6)
+
 /* RTC Control Registers */
 #define PM8607_RTC1			(0xA0)
 #define PM8607_RTC_COUNTER1		(0xA1)
@@ -370,7 +450,8 @@
 };
 
 struct pm860x_power_pdata {
-	unsigned	fast_charge;	/* charge current */
+	int		max_capacity;
+	int		resistor;
 };
 
 struct pm860x_platform_data {
@@ -379,6 +460,7 @@
 	struct pm860x_rtc_pdata		*rtc;
 	struct pm860x_touch_pdata	*touch;
 	struct pm860x_power_pdata	*power;
+	struct charger_desc		*chg_desc;
 	struct regulator_init_data	*regulator;
 
 	unsigned short	companion_addr;	/* I2C address of companion chip */
diff --git a/include/linux/platform_data/lp8727.h b/include/linux/platform_data/lp8727.h
index ea98c61..47128a5 100644
--- a/include/linux/platform_data/lp8727.h
+++ b/include/linux/platform_data/lp8727.h
@@ -13,32 +13,32 @@
 #define _LP8727_H
 
 enum lp8727_eoc_level {
-	EOC_5P,
-	EOC_10P,
-	EOC_16P,
-	EOC_20P,
-	EOC_25P,
-	EOC_33P,
-	EOC_50P,
+	LP8727_EOC_5P,
+	LP8727_EOC_10P,
+	LP8727_EOC_16P,
+	LP8727_EOC_20P,
+	LP8727_EOC_25P,
+	LP8727_EOC_33P,
+	LP8727_EOC_50P,
 };
 
 enum lp8727_ichg {
-	ICHG_90mA,
-	ICHG_100mA,
-	ICHG_400mA,
-	ICHG_450mA,
-	ICHG_500mA,
-	ICHG_600mA,
-	ICHG_700mA,
-	ICHG_800mA,
-	ICHG_900mA,
-	ICHG_1000mA,
+	LP8727_ICHG_90mA,
+	LP8727_ICHG_100mA,
+	LP8727_ICHG_400mA,
+	LP8727_ICHG_450mA,
+	LP8727_ICHG_500mA,
+	LP8727_ICHG_600mA,
+	LP8727_ICHG_700mA,
+	LP8727_ICHG_800mA,
+	LP8727_ICHG_900mA,
+	LP8727_ICHG_1000mA,
 };
 
 /**
  * struct lp8727_chg_param
  * @eoc_level : end of charge level setting
- * @ichg : charging current
+ * @ichg      : charging current
  */
 struct lp8727_chg_param {
 	enum lp8727_eoc_level eoc_level;
@@ -47,19 +47,22 @@
 
 /**
  * struct lp8727_platform_data
- * @get_batt_present : check battery status - exists or not
- * @get_batt_level : get battery voltage (mV)
+ * @get_batt_present  : check battery status - exists or not
+ * @get_batt_level    : get battery voltage (mV)
  * @get_batt_capacity : get battery capacity (%)
- * @get_batt_temp : get battery temperature
- * @ac, @usb : charging parameters each charger type
+ * @get_batt_temp     : get battery temperature
+ * @ac                : charging parameters for AC type charger
+ * @usb               : charging parameters for USB type charger
+ * @debounce_msec     : interrupt debounce time
  */
 struct lp8727_platform_data {
 	u8 (*get_batt_present)(void);
 	u16 (*get_batt_level)(void);
 	u8 (*get_batt_capacity)(void);
 	u8 (*get_batt_temp)(void);
-	struct lp8727_chg_param ac;
-	struct lp8727_chg_param usb;
+	struct lp8727_chg_param *ac;
+	struct lp8727_chg_param *usb;
+	unsigned int debounce_msec;
 };
 
 #endif
diff --git a/include/linux/power/charger-manager.h b/include/linux/power/charger-manager.h
index cd22029..0e86840 100644
--- a/include/linux/power/charger-manager.h
+++ b/include/linux/power/charger-manager.h
@@ -109,24 +109,43 @@
  * struct charger_regulator
  * @regulator_name: the name of regulator for using charger.
  * @consumer: the regulator consumer for the charger.
+ * @externally_control:
+ *	Set if the charger-manager cannot control charger,
+ *	the charger will be maintained with disabled state.
  * @cables:
  *	the array of charger cables to enable/disable charger
  *	and set current limit according to constratint data of
  *	struct charger_cable if only charger cable included
  *	in the array of charger cables is attached/detached.
  * @num_cables: the number of charger cables.
+ * @attr_g: Attribute group for the charger(regulator)
+ * @attr_name: "name" sysfs entry
+ * @attr_state: "state" sysfs entry
+ * @attr_externally_control: "externally_control" sysfs entry
+ * @attrs: Arrays pointing to attr_name/state/externally_control for attr_g
  */
 struct charger_regulator {
 	/* The name of regulator for charging */
 	const char *regulator_name;
 	struct regulator *consumer;
 
+	/* charger never on when system is on */
+	int externally_control;
+
 	/*
 	 * Store constraint information related to current limit,
 	 * each cable have different condition for charging.
 	 */
 	struct charger_cable *cables;
 	int num_cables;
+
+	struct attribute_group attr_g;
+	struct device_attribute attr_name;
+	struct device_attribute attr_state;
+	struct device_attribute attr_externally_control;
+	struct attribute *attrs[4];
+
+	struct charger_manager *cm;
 };
 
 /**
@@ -140,7 +159,11 @@
  *	If it has dropped more than fullbatt_vchkdrop_uV after
  *	fullbatt_vchkdrop_ms, CM will restart charging.
  * @fullbatt_uV: voltage in microvolt
- *	If it is not being charged and VBATT >= fullbatt_uV,
+ *	If VBATT >= fullbatt_uV, it is assumed to be full.
+ * @fullbatt_soc: state of Charge in %
+ *	If state of Charge >= fullbatt_soc, it is assumed to be full.
+ * @fullbatt_full_capacity: full capacity measure
+ *	If full capacity of battery >= fullbatt_full_capacity,
  *	it is assumed to be full.
  * @polling_interval_ms: interval in millisecond at which
  *	charger manager will monitor battery health
@@ -148,7 +171,7 @@
  *	Specify where information for existance of battery can be obtained
  * @psy_charger_stat: the names of power-supply for chargers
  * @num_charger_regulator: the number of entries in charger_regulators
- * @charger_regulators: array of regulator_bulk_data for chargers
+ * @charger_regulators: array of charger regulators
  * @psy_fuel_gauge: the name of power-supply for fuel gauge
  * @temperature_out_of_range:
  *	Determine whether the status is overheat or cold or normal.
@@ -158,6 +181,13 @@
  * @measure_battery_temp:
  *	true: measure battery temperature
  *	false: measure ambient temperature
+ * @charging_max_duration_ms: Maximum possible duration for charging
+ *	If whole charging duration exceed 'charging_max_duration_ms',
+ *	cm stop charging.
+ * @discharging_max_duration_ms:
+ *	Maximum possible duration for discharging with charger cable
+ *	after full-batt. If discharging duration exceed 'discharging
+ *	max_duration_ms', cm start charging.
  */
 struct charger_desc {
 	char *psy_name;
@@ -168,6 +198,8 @@
 	unsigned int fullbatt_vchkdrop_ms;
 	unsigned int fullbatt_vchkdrop_uV;
 	unsigned int fullbatt_uV;
+	unsigned int fullbatt_soc;
+	unsigned int fullbatt_full_capacity;
 
 	enum data_source battery_present;
 
@@ -180,6 +212,9 @@
 
 	int (*temperature_out_of_range)(int *mC);
 	bool measure_battery_temp;
+
+	u64 charging_max_duration_ms;
+	u64 discharging_max_duration_ms;
 };
 
 #define PSY_NAME_MAX	30
@@ -194,8 +229,6 @@
  * @charger_enabled: the state of charger
  * @fullbatt_vchk_jiffies_at:
  *	jiffies at the time full battery check will occur.
- * @fullbatt_vchk_uV: voltage in microvolt
- *	criteria for full battery
  * @fullbatt_vchk_work: work queue for full battery check
  * @emergency_stop:
  *	When setting true, stop charging
@@ -206,6 +239,8 @@
  *	saved status of external power before entering suspend-to-RAM
  * @status_save_batt:
  *	saved status of battery before entering suspend-to-RAM
+ * @charging_start_time: saved start time of enabling charging
+ * @charging_end_time: saved end time of disabling charging
  */
 struct charger_manager {
 	struct list_head entry;
@@ -218,7 +253,6 @@
 	bool charger_enabled;
 
 	unsigned long fullbatt_vchk_jiffies_at;
-	unsigned int fullbatt_vchk_uV;
 	struct delayed_work fullbatt_vchk_work;
 
 	int emergency_stop;
@@ -229,6 +263,9 @@
 
 	bool status_save_ext_pwr_inserted;
 	bool status_save_batt;
+
+	u64 charging_start_time;
+	u64 charging_end_time;
 };
 
 #ifdef CONFIG_CHARGER_MANAGER
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index 0bafbb1..e5ef458 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -88,6 +88,7 @@
 	POWER_SUPPLY_PROP_HEALTH,
 	POWER_SUPPLY_PROP_PRESENT,
 	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_AUTHENTIC,
 	POWER_SUPPLY_PROP_TECHNOLOGY,
 	POWER_SUPPLY_PROP_CYCLE_COUNT,
 	POWER_SUPPLY_PROP_VOLTAGE_MAX,
@@ -110,7 +111,9 @@
 	POWER_SUPPLY_PROP_CHARGE_AVG,
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
 	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
 	POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN,
 	POWER_SUPPLY_PROP_ENERGY_FULL,
@@ -248,6 +251,7 @@
 	case POWER_SUPPLY_PROP_CHARGE_AVG:
 	case POWER_SUPPLY_PROP_CHARGE_COUNTER:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
 	case POWER_SUPPLY_PROP_CURRENT_MAX:
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
@@ -276,6 +280,7 @@
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
 	case POWER_SUPPLY_PROP_VOLTAGE_OCV:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 	case POWER_SUPPLY_PROP_POWER_NOW:
 		return 1;
 	default: