Merge branch 'drivers/rtc-sa1100' into next/drivers
* drivers/rtc-sa1100:
ARM: sa1100: clean up of the clock support
ARM: pxa: add dummy clock for sa1100-rtc
RTC: sa1100: support sa1100, pxa and mmp soc families
RTC: sa1100: remove redundant code of setting alarm
RTC: sa1100: Clean out ost register
Conflicts:
arch/arm/mach-pxa/pxa25x.c
arch/arm/mach-pxa/pxa27x.c
diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd
index fa72ccb..dbedafb 100644
--- a/Documentation/ABI/testing/sysfs-bus-rbd
+++ b/Documentation/ABI/testing/sysfs-bus-rbd
@@ -57,13 +57,6 @@
$ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
-rollback_snap
-
- Rolls back data to the specified snapshot. This goes over the entire
- list of rados blocks and sends a rollback command to each.
-
- $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
snap_*
A directory per each snapshot
diff --git a/Documentation/devicetree/bindings/arm/insignal-boards.txt b/Documentation/devicetree/bindings/arm/insignal-boards.txt
new file mode 100644
index 0000000..524c3dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/insignal-boards.txt
@@ -0,0 +1,8 @@
+* Insignal's Exynos4210 based Origen evaluation board
+
+Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+ - compatible = should be one or more of the following.
+ (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+ (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/arm/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung-boards.txt
new file mode 100644
index 0000000..0bf68be
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung-boards.txt
@@ -0,0 +1,8 @@
+* Samsung's Exynos4210 based SMDKV310 evaluation board
+
+SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+
+Required root node properties:
+ - compatible = should be one or more of the following.
+ (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
+ (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt
new file mode 100644
index 0000000..a4cd273
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt
@@ -0,0 +1,30 @@
+* ARM PrimeCell PL330 DMA Controller
+
+The ARM PrimeCell PL330 DMA controller can move blocks of memory contents
+between memory and peripherals or memory to memory.
+
+Required properties:
+ - compatible: should include both "arm,pl330" and "arm,primecell".
+ - reg: physical base address of the controller and length of memory mapped
+ region.
+ - interrupts: interrupt number to the cpu.
+
+Example:
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <99>;
+ };
+
+Client drivers (device nodes requiring dma transfers from dev-to-mem or
+mem-to-dev) should specify the DMA channel numbers using a two-value pair
+as shown below.
+
+ [property name] = <[phandle of the dma controller] [dma request id]>;
+
+ where 'dma request id' is the dma request number which is connected
+ to the client controller. The 'property name' is recommended to be
+ of the form <name>-dma-channel.
+
+ Example: tx-dma-channel = <&pdma0 12>;
diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
new file mode 100644
index 0000000..8f50fe5
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt
@@ -0,0 +1,40 @@
+Samsung Exynos4 GPIO Controller
+
+Required properties:
+- compatible: Compatible property value should be "samsung,exynos4-gpio>".
+
+- reg: Physical base address of the controller and length of memory mapped
+ region.
+
+- #gpio-cells: Should be 4. The syntax of the gpio specifier used by client nodes
+ should be the following with values derived from the SoC user manual.
+ <[phandle of the gpio controller node]
+ [pin number within the gpio controller]
+ [mux function]
+ [pull up/down]
+ [drive strength]>
+
+ Values for gpio specifier:
+ - Pin number: is a value between 0 to 7.
+ - Pull Up/Down: 0 - Pull Up/Down Disabled.
+ 1 - Pull Down Enabled.
+ 3 - Pull Up Enabled.
+ - Drive Strength: 0 - 1x,
+ 1 - 3x,
+ 2 - 2x,
+ 3 - 4x
+
+- gpio-controller: Specifies that the node is a gpio controller.
+- #address-cells: should be 1.
+- #size-cells: should be 1.
+
+Example:
+
+ gpa0: gpio-controller@11400000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ gpio-controller;
+ };
diff --git a/Documentation/devicetree/bindings/input/samsung-keypad.txt b/Documentation/devicetree/bindings/input/samsung-keypad.txt
new file mode 100644
index 0000000..ce3e394
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/samsung-keypad.txt
@@ -0,0 +1,88 @@
+* Samsung's Keypad Controller device tree bindings
+
+Samsung's Keypad controller is used to interface a SoC with a matrix-type
+keypad device. The keypad controller supports multiple row and column lines.
+A key can be placed at each intersection of a unique row and a unique column.
+The keypad controller can sense a key-press and key-release and report the
+event using a interrupt to the cpu.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c6410-keypad": For controllers compatible with s3c6410 keypad
+ controller.
+ - "samsung,s5pv210-keypad": For controllers compatible with s5pv210 keypad
+ controller.
+
+- reg: physical base address of the controller and length of memory mapped
+ region.
+
+- interrupts: The interrupt number to the cpu.
+
+Required Board Specific Properties:
+- samsung,keypad-num-rows: Number of row lines connected to the keypad
+ controller.
+
+- samsung,keypad-num-columns: Number of column lines connected to the
+ keypad controller.
+
+- row-gpios: List of gpios used as row lines. The gpio specifier for
+ this property depends on the gpio controller to which these row lines
+ are connected.
+
+- col-gpios: List of gpios used as column lines. The gpio specifier for
+ this property depends on the gpio controller to which these column
+ lines are connected.
+
+- Keys represented as child nodes: Each key connected to the keypad
+ controller is represented as a child node to the keypad controller
+ device node and should include the following properties.
+ - keypad,row: the row number to which the key is connected.
+ - keypad,column: the column number to which the key is connected.
+ - linux,code: the key-code to be reported when the key is pressed
+ and released.
+
+Optional Properties specific to linux:
+- linux,keypad-no-autorepeat: do no enable autorepeat feature.
+- linux,keypad-wakeup: use any event on keypad as wakeup event.
+
+
+Example:
+ keypad@100A0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <173>;
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,input-no-autorepeat;
+ linux,input-wakeup;
+
+ row-gpios = <&gpx2 0 3 3 0
+ &gpx2 1 3 3 0>;
+
+ col-gpios = <&gpx1 0 3 0 0
+ &gpx1 1 3 0 0
+ &gpx1 2 3 0 0
+ &gpx1 3 3 0 0
+ &gpx1 4 3 0 0
+ &gpx1 5 3 0 0
+ &gpx1 6 3 0 0
+ &gpx1 7 3 0 0>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/net/macb.txt b/Documentation/devicetree/bindings/net/macb.txt
new file mode 100644
index 0000000..44afa0e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/macb.txt
@@ -0,0 +1,25 @@
+* Cadence MACB/GEM Ethernet controller
+
+Required properties:
+- compatible: Should be "cdns,[<chip>-]{macb|gem}"
+ Use "cdns,at91sam9260-macb" Atmel at91sam9260 and at91sam9263 SoCs.
+ Use "cdns,at32ap7000-macb" for other 10/100 usage or use the generic form: "cdns,macb".
+ Use "cnds,pc302-gem" for Picochip picoXcell pc302 and later devices based on
+ the Cadence GEM, or the generic form: "cdns,gem".
+- reg: Address and length of the register set for the device
+- interrupts: Should contain macb interrupt
+- phy-mode: String, operation mode of the PHY interface.
+ Supported values are: "mii", "rmii", "gmii", "rgmii".
+
+Optional properties:
+- local-mac-address: 6 bytes, mac address
+
+Examples:
+
+ macb0: ethernet@fffc4000 {
+ compatible = "cdns,at32ap7000-macb";
+ reg = <0xfffc4000 0x4000>;
+ interrupts = <21>;
+ phy-mode = "rmii";
+ local-mac-address = [3a 0e 03 04 05 06];
+ };
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
new file mode 100644
index 0000000..90ec45f
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -0,0 +1,20 @@
+* Samsung's S3C Real Time Clock controller
+
+Required properties:
+- compatible: should be one of the following.
+ * "samsung,s3c2410-rtc" - for controllers compatible with s3c2410 rtc.
+ * "samsung,s3c6410-rtc" - for controllers compatible with s3c6410 rtc.
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: Two interrupt numbers to the cpu should be specified. First
+ interrupt number is the rtc alarm interupt and second interrupt number
+ is the rtc tick interrupt. The number of cells representing a interrupt
+ depends on the parent interrupt controller.
+
+Example:
+
+ rtc@10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <44 0 45 0>;
+ };
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt
new file mode 100644
index 0000000..2c8a17c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt
@@ -0,0 +1,14 @@
+* Samsung's UART Controller
+
+The Samsung's UART controller is used for interfacing SoC with serial communicaion
+devices.
+
+Required properties:
+- compatible: should be
+ - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports.
+
+- reg: base physical address of the controller and length of memory mapped
+ region.
+
+- interrupts: interrupt number to the cpu. The interrupt specifier format depends
+ on the interrupt controller parent.
diff --git a/Makefile b/Makefile
index d1ea73f..a43733d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 2
SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 86ebbc5..34d13ff 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -220,8 +220,9 @@
be avoided when possible.
config PHYS_OFFSET
- hex "Physical address of main memory"
+ hex "Physical address of main memory" if MMU
depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ default DRAM_BASE if !MMU
help
Please provide the physical address corresponding to the
location of main memory in your system.
@@ -591,6 +592,7 @@
select ARCH_REQUIRE_GPIOLIB
select CLKDEV_LOOKUP
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
@@ -673,6 +675,7 @@
select CLKSRC_MMIO
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select GPIO_PXA
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select PLAT_PXA
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index aeef042..07603b8 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -114,6 +114,13 @@
atmel,use-dma-tx;
status = "disabled";
};
+
+ macb0: ethernet@fffc4000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffc4000 0x100>;
+ interrupts = <21>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index db6a452..fffa005 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -101,6 +101,13 @@
atmel,use-dma-tx;
status = "disabled";
};
+
+ macb0: ethernet@fffbc000 {
+ compatible = "cdns,at32ap7000-macb", "cdns,macb";
+ reg = <0xfffbc000 0x100>;
+ interrupts = <25>;
+ status = "disabled";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 85b34f59..a387e77 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -30,6 +30,11 @@
usart1: serial@fff90000 {
status = "okay";
};
+
+ macb0: ethernet@fffbc000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
new file mode 100644
index 0000000..b8c4763
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -0,0 +1,137 @@
+/*
+ * Samsung's Exynos4210 based Origen board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Device tree source file for Insignal's Origen board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+ model = "Insignal Origen evaluation board based on Exynos4210";
+ compatible = "insignal,origen", "samsung,exynos4210";
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs ="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
+ };
+
+ sdhci@12530000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk2 2 2 3 3>;
+ gpios = <&gpk2 0 2 0 3>,
+ <&gpk2 1 2 0 3>,
+ <&gpk2 3 2 3 3>,
+ <&gpk2 4 2 3 3>,
+ <&gpk2 5 2 3 3>,
+ <&gpk2 6 2 3 3>;
+ };
+
+ sdhci@12510000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk0 2 2 3 3>;
+ gpios = <&gpk0 0 2 0 3>,
+ <&gpk0 1 2 0 3>,
+ <&gpk0 3 2 3 3>,
+ <&gpk0 4 2 3 3>,
+ <&gpk0 5 2 3 3>,
+ <&gpk0 6 2 3 3>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ up {
+ label = "Up";
+ gpios = <&gpx2 0 0 0 2>;
+ linux,code = <103>;
+ };
+
+ down {
+ label = "Down";
+ gpios = <&gpx2 1 0 0 2>;
+ linux,code = <108>;
+ };
+
+ back {
+ label = "Back";
+ gpios = <&gpx1 7 0 0 2>;
+ linux,code = <158>;
+ };
+
+ home {
+ label = "Home";
+ gpios = <&gpx1 6 0 0 2>;
+ linux,code = <102>;
+ };
+
+ menu {
+ label = "Menu";
+ gpios = <&gpx1 5 0 0 2>;
+ linux,code = <139>;
+ };
+ };
+
+ keypad@100A0000 {
+ status = "disabled";
+ };
+
+ sdhci@12520000 {
+ status = "disabled";
+ };
+
+ sdhci@12540000 {
+ status = "disabled";
+ };
+
+ i2c@13860000 {
+ status = "disabled";
+ };
+
+ i2c@13870000 {
+ status = "disabled";
+ };
+
+ i2c@13880000 {
+ status = "disabled";
+ };
+
+ i2c@13890000 {
+ status = "disabled";
+ };
+
+ i2c@138A0000 {
+ status = "disabled";
+ };
+
+ i2c@138B0000 {
+ status = "disabled";
+ };
+
+ i2c@138C0000 {
+ status = "disabled";
+ };
+
+ i2c@138D0000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
new file mode 100644
index 0000000..27afc8e
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -0,0 +1,182 @@
+/*
+ * Samsung's Exynos4210 based SMDKV310 board device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Device tree source file for Samsung's SMDKV310 board which is based on
+ * Samsung's Exynos4210 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos4210.dtsi"
+
+/ {
+ model = "Samsung smdkv310 evaluation board based on Exynos4210";
+ compatible = "samsung,smdkv310", "samsung,exynos4210";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
+ };
+
+ sdhci@12530000 {
+ samsung,sdhci-bus-width = <4>;
+ linux,mmc_cap_4_bit_data;
+ samsung,sdhci-cd-internal;
+ gpio-cd = <&gpk2 2 2 3 3>;
+ gpios = <&gpk2 0 2 0 3>,
+ <&gpk2 1 2 0 3>,
+ <&gpk2 3 2 3 3>,
+ <&gpk2 4 2 3 3>,
+ <&gpk2 5 2 3 3>,
+ <&gpk2 6 2 3 3>;
+ };
+
+ keypad@100A0000 {
+ samsung,keypad-num-rows = <2>;
+ samsung,keypad-num-columns = <8>;
+ linux,keypad-no-autorepeat;
+ linux,keypad-wakeup;
+
+ row-gpios = <&gpx2 0 3 3 0>,
+ <&gpx2 1 3 3 0>;
+
+ col-gpios = <&gpx1 0 3 0 0>,
+ <&gpx1 1 3 0 0>,
+ <&gpx1 2 3 0 0>,
+ <&gpx1 3 3 0 0>,
+ <&gpx1 4 3 0 0>,
+ <&gpx1 5 3 0 0>,
+ <&gpx1 6 3 0 0>,
+ <&gpx1 7 3 0 0>;
+
+ key_1 {
+ keypad,row = <0>;
+ keypad,column = <3>;
+ linux,code = <2>;
+ };
+
+ key_2 {
+ keypad,row = <0>;
+ keypad,column = <4>;
+ linux,code = <3>;
+ };
+
+ key_3 {
+ keypad,row = <0>;
+ keypad,column = <5>;
+ linux,code = <4>;
+ };
+
+ key_4 {
+ keypad,row = <0>;
+ keypad,column = <6>;
+ linux,code = <5>;
+ };
+
+ key_5 {
+ keypad,row = <0>;
+ keypad,column = <7>;
+ linux,code = <6>;
+ };
+
+ key_a {
+ keypad,row = <1>;
+ keypad,column = <3>;
+ linux,code = <30>;
+ };
+
+ key_b {
+ keypad,row = <1>;
+ keypad,column = <4>;
+ linux,code = <48>;
+ };
+
+ key_c {
+ keypad,row = <1>;
+ keypad,column = <5>;
+ linux,code = <46>;
+ };
+
+ key_d {
+ keypad,row = <1>;
+ keypad,column = <6>;
+ linux,code = <32>;
+ };
+
+ key_e {
+ keypad,row = <1>;
+ keypad,column = <7>;
+ linux,code = <18>;
+ };
+ };
+
+ i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ gpios = <&gpd1 0 2 3 0>,
+ <&gpd1 1 2 3 0>;
+
+ eeprom@50 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x50>;
+ };
+
+ eeprom@52 {
+ compatible = "samsung,24ad0xd1";
+ reg = <0x52>;
+ };
+ };
+
+ sdhci@12510000 {
+ status = "disabled";
+ };
+
+ sdhci@12520000 {
+ status = "disabled";
+ };
+
+ sdhci@12540000 {
+ status = "disabled";
+ };
+
+ i2c@13870000 {
+ status = "disabled";
+ };
+
+ i2c@13880000 {
+ status = "disabled";
+ };
+
+ i2c@13890000 {
+ status = "disabled";
+ };
+
+ i2c@138A0000 {
+ status = "disabled";
+ };
+
+ i2c@138B0000 {
+ status = "disabled";
+ };
+
+ i2c@138C0000 {
+ status = "disabled";
+ };
+
+ i2c@138D0000 {
+ status = "disabled";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
new file mode 100644
index 0000000..63d7578
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -0,0 +1,397 @@
+/*
+ * Samsung's Exynos4210 SoC device tree source
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * Samsung's Exynos4210 SoC device nodes are listed in this file. Exynos4210
+ * based board files can include this file and provide values for board specfic
+ * bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4210 SoC. As device tree coverage for Exynos4210 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos4210";
+ interrupt-parent = <&gic>;
+
+ gic:interrupt-controller@10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ watchdog@10060000 {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x10060000 0x100>;
+ interrupts = <0 43 0>;
+ };
+
+ rtc@10070000 {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 44 0>, <0 45 0>;
+ };
+
+ keypad@100A0000 {
+ compatible = "samsung,s5pv210-keypad";
+ reg = <0x100A0000 0x100>;
+ interrupts = <0 109 0>;
+ };
+
+ sdhci@12510000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12510000 0x100>;
+ interrupts = <0 73 0>;
+ };
+
+ sdhci@12520000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12520000 0x100>;
+ interrupts = <0 74 0>;
+ };
+
+ sdhci@12530000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12530000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci@12540000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12540000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial@13810000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13810000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ serial@13830000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13830000 0x100>;
+ interrupts = <0 55 0>;
+ };
+
+ i2c@13860000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c@13870000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c@13880000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c@13890000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c@138A0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138A0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c@138B0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138B0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ i2c@138C0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138C0000 0x100>;
+ interrupts = <0 64 0>;
+ };
+
+ i2c@138D0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138D0000 0x100>;
+ interrupts = <0 65 0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ pdma1: pdma@12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <0 36 0>;
+ };
+ };
+
+ gpio-controllers {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ ranges;
+
+ gpa0: gpio-controller@11400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa1: gpio-controller@11400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb: gpio-controller@11400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc0: gpio-controller@11400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc1: gpio-controller@11400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd0: gpio-controller@114000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd1: gpio-controller@114000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe0: gpio-controller@114000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe1: gpio-controller@11400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe2: gpio-controller@11400120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe3: gpio-controller@11400140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe4: gpio-controller@11400160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf0: gpio-controller@11400180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf1: gpio-controller@114001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf2: gpio-controller@114001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf3: gpio-controller@114001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpj0: gpio-controller@11000000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpj1: gpio-controller@11000020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk0: gpio-controller@11000040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk1: gpio-controller@11000060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk2: gpio-controller@11000080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpk3: gpio-controller@110000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl0: gpio-controller@110000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl1: gpio-controller@110000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpl2: gpio-controller@11000100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy0: gpio-controller@11000120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy1: gpio-controller@11000140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy2: gpio-controller@11000160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy3: gpio-controller@11000180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy4: gpio-controller@110001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy5: gpio-controller@110001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy6: gpio-controller@110001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x110001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx0: gpio-controller@11000C00 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C00 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx1: gpio-controller@11000C20 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C20 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx2: gpio-controller@11000C40 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C40 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx3: gpio-controller@11000C60 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11000C60 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpz: gpio-controller@03860000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x03860000 0x20>;
+ #gpio-cells = <4>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index d66e2c0..f04b535 100644
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -25,6 +25,11 @@
dbgu: serial@fffff200 {
status = "okay";
};
+
+ macb0: ethernet@fffc4000 {
+ phy-mode = "rmii";
+ status = "okay";
+ };
};
};
};
diff --git a/arch/arm/include/asm/unwind.h b/arch/arm/include/asm/unwind.h
index a5edf42..d1c3f3a 100644
--- a/arch/arm/include/asm/unwind.h
+++ b/arch/arm/include/asm/unwind.h
@@ -30,14 +30,15 @@
};
struct unwind_idx {
- unsigned long addr;
+ unsigned long addr_offset;
unsigned long insn;
};
struct unwind_table {
struct list_head list;
- struct unwind_idx *start;
- struct unwind_idx *stop;
+ const struct unwind_idx *start;
+ const struct unwind_idx *origin;
+ const struct unwind_idx *stop;
unsigned long begin_addr;
unsigned long end_addr;
};
@@ -49,15 +50,6 @@
extern void unwind_table_del(struct unwind_table *tab);
extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
- return 0;
-}
-#endif
-
#endif /* !__ASSEMBLY__ */
#ifdef CONFIG_ARM_UNWIND
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 8e9c98e..88b0941 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -640,6 +640,9 @@
static int __devinit armpmu_device_probe(struct platform_device *pdev)
{
+ if (!cpu_pmu)
+ return -ENODEV;
+
cpu_pmu->plat_device = pdev;
return 0;
}
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 3448a3f..8fc2c8f 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -895,8 +895,6 @@
{
struct machine_desc *mdesc;
- unwind_init();
-
setup_processor();
mdesc = setup_machine_fdt(__atags_pointer);
if (!mdesc)
@@ -904,6 +902,12 @@
machine_desc = mdesc;
machine_name = mdesc->name;
+#ifdef CONFIG_ZONE_DMA
+ if (mdesc->dma_zone_size) {
+ extern unsigned long arm_dma_zone_size;
+ arm_dma_zone_size = mdesc->dma_zone_size;
+ }
+#endif
if (mdesc->soft_reboot)
reboot_setup("s");
@@ -934,12 +938,6 @@
tcm_init();
-#ifdef CONFIG_ZONE_DMA
- if (mdesc->dma_zone_size) {
- extern unsigned long arm_dma_zone_size;
- arm_dma_zone_size = mdesc->dma_zone_size;
- }
-#endif
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif
diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c
index e7e8365..00df012 100644
--- a/arch/arm/kernel/unwind.c
+++ b/arch/arm/kernel/unwind.c
@@ -67,7 +67,7 @@
struct unwind_ctrl_block {
unsigned long vrs[16]; /* virtual register set */
- unsigned long *insn; /* pointer to the current instructions word */
+ const unsigned long *insn; /* pointer to the current instructions word */
int entries; /* number of entries left to interpret */
int byte; /* current byte number in the instructions word */
};
@@ -83,8 +83,9 @@
PC = 15
};
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
static DEFINE_SPINLOCK(unwind_lock);
static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@
})
/*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
* guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
*/
-static struct unwind_idx *search_index(unsigned long addr,
- struct unwind_idx *first,
- struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+ const struct unwind_idx *start,
+ const struct unwind_idx *origin,
+ const struct unwind_idx *stop)
{
- pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+ unsigned long addr_prel31;
- if (addr < first->addr) {
- pr_warning("unwind: Unknown symbol address %08lx\n", addr);
- return NULL;
- } else if (addr >= last->addr)
- return last;
+ pr_debug("%s(%08lx, %p, %p, %p)\n",
+ __func__, addr, start, origin, stop);
- while (first < last - 1) {
- struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+ /*
+ * only search in the section with the matching sign. This way the
+ * prel31 numbers can be compared as unsigned longs.
+ */
+ if (addr < (unsigned long)start)
+ /* negative offsets: [start; origin) */
+ stop = origin;
+ else
+ /* positive offsets: [origin; stop) */
+ start = origin;
- if (addr < mid->addr)
- last = mid;
- else
- first = mid;
+ /* prel31 for address relavive to start */
+ addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
+
+ while (start < stop - 1) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+ /*
+ * As addr_prel31 is relative to start an offset is needed to
+ * make it relative to mid.
+ */
+ if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+ mid->addr_offset)
+ stop = mid;
+ else {
+ /* keep addr_prel31 relative to start */
+ addr_prel31 -= ((unsigned long)mid -
+ (unsigned long)start);
+ start = mid;
+ }
}
- return first;
+ if (likely(start->addr_offset <= addr_prel31))
+ return start;
+ else {
+ pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+ return NULL;
+ }
}
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_origin(
+ const struct unwind_idx *start, const struct unwind_idx *stop)
{
- struct unwind_idx *idx = NULL;
+ pr_debug("%s(%p, %p)\n", __func__, start, stop);
+ while (start < stop) {
+ const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+ if (mid->addr_offset >= 0x40000000)
+ /* negative offset */
+ start = mid + 1;
+ else
+ /* positive offset */
+ stop = mid;
+ }
+ pr_debug("%s -> %p\n", __func__, stop);
+ return stop;
+}
+
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+ const struct unwind_idx *idx = NULL;
unsigned long flags;
pr_debug("%s(%08lx)\n", __func__, addr);
- if (core_kernel_text(addr))
+ if (core_kernel_text(addr)) {
+ if (unlikely(!__origin_unwind_idx))
+ __origin_unwind_idx =
+ unwind_find_origin(__start_unwind_idx,
+ __stop_unwind_idx);
+
/* main unwind table */
idx = search_index(addr, __start_unwind_idx,
- __stop_unwind_idx - 1);
- else {
+ __origin_unwind_idx,
+ __stop_unwind_idx);
+ } else {
/* module unwind tables */
struct unwind_table *table;
@@ -145,7 +200,8 @@
if (addr >= table->begin_addr &&
addr < table->end_addr) {
idx = search_index(addr, table->start,
- table->stop - 1);
+ table->origin,
+ table->stop);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
@@ -274,7 +330,7 @@
int unwind_frame(struct stackframe *frame)
{
unsigned long high, low;
- struct unwind_idx *idx;
+ const struct unwind_idx *idx;
struct unwind_ctrl_block ctrl;
/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@
unsigned long text_size)
{
unsigned long flags;
- struct unwind_idx *idx;
struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@
if (!tab)
return tab;
- tab->start = (struct unwind_idx *)start;
- tab->stop = (struct unwind_idx *)(start + size);
+ tab->start = (const struct unwind_idx *)start;
+ tab->stop = (const struct unwind_idx *)(start + size);
+ tab->origin = unwind_find_origin(tab->start, tab->stop);
tab->begin_addr = text_addr;
tab->end_addr = text_addr + text_size;
- /* Convert the symbol addresses to absolute values */
- for (idx = tab->start; idx < tab->stop; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
spin_lock_irqsave(&unwind_lock, flags);
list_add_tail(&tab->list, &unwind_tables);
spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@
kfree(tab);
}
-
-int __init unwind_init(void)
-{
- struct unwind_idx *idx;
-
- /* Convert the symbol addresses to absolute values */
- for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
- idx->addr = prel31_to_addr(&idx->addr);
-
- pr_debug("unwind: ARM stack unwinding initialised\n");
-
- return 0;
-}
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index ecdd54d..17632b8 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -137,7 +137,7 @@
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91CAP9_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -210,6 +210,8 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index adad70d..695aeca 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -200,7 +200,7 @@
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -227,7 +227,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
@@ -264,7 +264,7 @@
platform_device_register(&at91cap9_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index ad93068..55d2291 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -135,7 +135,7 @@
#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -162,7 +162,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
@@ -199,7 +199,7 @@
platform_device_register(&at91rm9200_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 0d20677..1c945e3 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -120,7 +120,7 @@
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9260_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -190,6 +190,8 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 629fa97..b1a4812 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -136,7 +136,7 @@
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -163,7 +163,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
@@ -200,7 +200,7 @@
platform_device_register(&at91sam9260_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index f83fbb0..182d112 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -118,7 +118,7 @@
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9263_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -182,6 +182,8 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk),
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index d5fbac9..183b5f1 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -144,7 +144,7 @@
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -171,7 +171,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
@@ -208,7 +208,7 @@
platform_device_register(&at91sam9263_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 318b040..5a0e522 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -150,7 +150,7 @@
.type = CLK_TYPE_PERIPHERAL,
};
static struct clk macb_clk = {
- .name = "macb_clk",
+ .name = "pclk",
.pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
.type = CLK_TYPE_PERIPHERAL,
};
@@ -209,6 +209,8 @@
};
static struct clk_lookup periph_clocks_lookups[] = {
+ /* One additional fake clock for macb_hclk */
+ CLKDEV_CON_ID("hclk", &macb_clk),
/* One additional fake clock for ohci */
CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 09a16d6..e2cb835 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -284,7 +284,7 @@
#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
+static struct macb_platform_data eth_data;
static struct resource eth_resources[] = {
[0] = {
@@ -311,7 +311,7 @@
.num_resources = ARRAY_SIZE(eth_resources),
};
-void __init at91_add_device_eth(struct at91_eth_data *data)
+void __init at91_add_device_eth(struct macb_platform_data *data)
{
if (!data)
return;
@@ -348,7 +348,7 @@
platform_device_register(&at91sam9g45_eth_device);
}
#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
+void __init at91_add_device_eth(struct macb_platform_data *data) {}
#endif
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 367d5cd..a60d98d 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -63,7 +63,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata onearm_eth_data = {
+static struct macb_platform_data __initdata onearm_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index 4282d96..17fc779 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -103,7 +103,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata afeb9260_macb_data = {
+static struct macb_platform_data __initdata afeb9260_macb_data = {
.phy_irq_pin = AT91_PIN_PA9,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index f90cfb3..2037d2c4 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -115,7 +115,7 @@
/*
* MACB Ethernet device
*/
-static struct __initdata at91_eth_data cam60_macb_data = {
+static struct __initdata macb_platform_data cam60_macb_data = {
.phy_irq_pin = AT91_PIN_PB5,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 5dffd3b..af5520c 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -153,7 +153,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata cap9adk_macb_data = {
+static struct macb_platform_data __initdata cap9adk_macb_data = {
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index 774c87f..529b356 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -57,7 +57,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata carmeva_eth_data = {
+static struct macb_platform_data __initdata carmeva_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index fc885a4..04d2b9b 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -99,7 +99,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata cpu9krea_macb_data = {
+static struct macb_platform_data __initdata cpu9krea_macb_data = {
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index d35e65b..7a4c82e 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -82,7 +82,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata cpuat91_eth_data = {
+static struct macb_platform_data __initdata cpuat91_eth_data = {
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index c393666..b004b20 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -58,7 +58,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata csb337_eth_data = {
+static struct macb_platform_data __initdata csb337_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 586100e..e966de5 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -52,7 +52,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata csb637_eth_data = {
+static struct macb_platform_data __initdata csb637_eth_data = {
.phy_irq_pin = AT91_PIN_PC0,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 45db7a3..3788fa5 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -60,7 +60,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata eb9200_eth_data = {
+static struct macb_platform_data __initdata eb9200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 2f9c16d2..af7622e 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -64,7 +64,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata ecb_at91eth_data = {
+static struct macb_platform_data __initdata ecb_at91eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
index 8252c72..8e75867 100644
--- a/arch/arm/mach-at91/board-eco920.c
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -47,7 +47,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata eco920_eth_data = {
+static struct macb_platform_data __initdata eco920_eth_data = {
.phy_irq_pin = AT91_PIN_PC2,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c
index f27d1a7..de8e096 100644
--- a/arch/arm/mach-at91/board-foxg20.c
+++ b/arch/arm/mach-at91/board-foxg20.c
@@ -135,7 +135,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata foxg20_macb_data = {
+static struct macb_platform_data __initdata foxg20_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c
index 2e95949..51c82f1 100644
--- a/arch/arm/mach-at91/board-gsia18s.c
+++ b/arch/arm/mach-at91/board-gsia18s.c
@@ -93,7 +93,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 3bae73e..9628a3d 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -61,7 +61,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata kafa_eth_data = {
+static struct macb_platform_data __initdata kafa_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index e61351f..5ba5244 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -69,7 +69,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata kb9202_eth_data = {
+static struct macb_platform_data __initdata kb9202_eth_data = {
.phy_irq_pin = AT91_PIN_PB29,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index ef816c1..56e7aee 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -155,7 +155,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata neocore926_macb_data = {
+static struct macb_platform_data __initdata neocore926_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c
index 49e3f69..c545a3e 100644
--- a/arch/arm/mach-at91/board-pcontrol-g20.c
+++ b/arch/arm/mach-at91/board-pcontrol-g20.c
@@ -122,7 +122,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index 0a8fe6a..dc18759 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -60,7 +60,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata picotux200_eth_data = {
+static struct macb_platform_data __initdata picotux200_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 07421bd..5444d6a 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -104,7 +104,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA31,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 80a8c9c..022d0ce 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -65,7 +65,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata dk_eth_data = {
+static struct macb_platform_data __initdata dk_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 99fd7f8..ed27586 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -65,7 +65,7 @@
at91_set_serial_console(0);
}
-static struct at91_eth_data __initdata ek_eth_data = {
+static struct macb_platform_data __initdata ek_eth_data = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
index e927df0..ed3b21f 100644
--- a/arch/arm/mach-at91/board-rsi-ews.c
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -60,7 +60,7 @@
/*
* Ethernet
*/
-static struct at91_eth_data rsi_ews_eth_data __initdata = {
+static struct macb_platform_data rsi_ews_eth_data __initdata = {
.phy_irq_pin = AT91_PIN_PC4,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 072d53a..3e4b50e 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -109,7 +109,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 0,
};
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 4f10181..13478e1 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -151,7 +151,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index bccdcf2..fcf194e 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -158,7 +158,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 64fc75c..78d27cc 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -123,7 +123,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PA7,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 92de912..4e1ee9d 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -115,7 +115,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PD5,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c
index 0df01c6..fbec934 100644
--- a/arch/arm/mach-at91/board-snapper9260.c
+++ b/arch/arm/mach-at91/board-snapper9260.c
@@ -65,7 +65,7 @@
.vbus_polled = 1,
};
-static struct at91_eth_data snapper9260_macb_data = {
+static struct macb_platform_data snapper9260_macb_data = {
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c
index 936e5fd..7c06c07 100644
--- a/arch/arm/mach-at91/board-stamp9g20.c
+++ b/arch/arm/mach-at91/board-stamp9g20.c
@@ -157,7 +157,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata macb_data = {
+static struct macb_platform_data __initdata macb_data = {
.phy_irq_pin = AT91_PIN_PA28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
index 0a20bab..3d84233 100644
--- a/arch/arm/mach-at91/board-usb-a926x.c
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -146,7 +146,7 @@
/*
* MACB Ethernet device
*/
-static struct at91_eth_data __initdata ek_macb_data = {
+static struct macb_platform_data __initdata ek_macb_data = {
.phy_irq_pin = AT91_PIN_PE31,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 12a3f95..2c40a21 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -110,7 +110,7 @@
/*
* Ethernet
*/
-static struct at91_eth_data __initdata yl9200_eth_data = {
+static struct macb_platform_data __initdata yl9200_eth_data = {
.phy_irq_pin = AT91_PIN_PB28,
.is_rmii = 1,
};
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index eac92e9..e209a299 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -40,6 +40,7 @@
#include <linux/atmel-mci.h>
#include <sound/atmel-ac97c.h>
#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
/* USB Device */
struct at91_udc_data {
@@ -81,18 +82,7 @@
/* atmel-mci platform config */
extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
- /* Ethernet (EMAC & MACB) */
-struct at91_eth_data {
- u32 phy_mask;
- u8 phy_irq_pin; /* PHY IRQ */
- u8 is_rmii; /* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45)
-#define eth_platform_data at91_eth_data
-#endif
+extern void __init at91_add_device_eth(struct macb_platform_data *data);
/* USB Host */
struct at91_usbh_data {
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 724ec0f..4e36e8f 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -57,6 +57,11 @@
help
Use MCT (Multi Core Timer) as kernel timers
+config EXYNOS4_DEV_DMA
+ bool
+ help
+ Compile in amba device definitions for DMA controller
+
config EXYNOS4_DEV_AHCI
bool
help
@@ -82,6 +87,11 @@
help
Compile in platform device definitions for DWMCI
+config EXYNOS4_DEV_USB_OHCI
+ bool
+ help
+ Compile in platform device definition for USB OHCI
+
config EXYNOS4_SETUP_I2C1
bool
help
@@ -143,6 +153,11 @@
help
Common setup code for USB PHY controller
+config EXYNOS4_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
# machine support
if ARCH_EXYNOS4
@@ -177,8 +192,10 @@
select SAMSUNG_DEV_BACKLIGHT
select EXYNOS4_DEV_AHCI
select SAMSUNG_DEV_KEYPAD
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -197,6 +214,7 @@
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_AHCI
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
help
@@ -222,6 +240,7 @@
select S5P_DEV_MFC
select S5P_DEV_ONENAND
select S5P_DEV_TV
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_I2C1
@@ -255,6 +274,7 @@
select S5P_DEV_MFC
select S5P_DEV_USB_EHCI
select S5P_SETUP_MIPIPHY
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
select EXYNOS4_SETUP_FIMC
select EXYNOS4_SETUP_FIMD0
@@ -287,7 +307,9 @@
select S5P_DEV_USB_EHCI
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
+ select EXYNOS4_DEV_DMA
select EXYNOS4_DEV_PD
+ select EXYNOS4_DEV_USB_OHCI
select EXYNOS4_SETUP_FIMD0
select EXYNOS4_SETUP_SDHCI
select EXYNOS4_SETUP_USB_PHY
@@ -327,6 +349,20 @@
Machine support for Samsung SMDK4412
endif
+comment "Flattened Device Tree based board for Exynos4 based SoC"
+
+config MACH_EXYNOS4_DT
+ bool "Samsung Exynos4 Machine using device tree"
+ select CPU_EXYNOS4210
+ select USE_OF
+ select ARM_AMBA
+ select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
+ help
+ Machine support for Samsung Exynos4 machine with device tree enabled.
+ Select this if a fdt blob is available for the Exynos4 SoC based board.
+ Note: This is under development and not all peripherals can be supported
+ with this machine file.
+
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 59069a3..db527ab 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -13,7 +13,7 @@
# Core support for EXYNOS4 system
obj-$(CONFIG_ARCH_EXYNOS4) += cpu.o init.o clock.o irq-combiner.o setup-i2c0.o
-obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4) += irq-eint.o pmu.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
obj-$(CONFIG_PM) += pm.o
@@ -37,6 +37,8 @@
obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
+obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
+
# device support
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
@@ -44,6 +46,8 @@
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
+obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
+obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
@@ -55,6 +59,6 @@
obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
+obj-$(CONFIG_EXYNOS4_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 2894f0a..da50b1a 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -553,16 +553,6 @@
.enable = exynos4_clk_dac_ctrl,
.ctrlbit = (1 << 0),
}, {
- .name = "dma",
- .devname = "dma-pl330.0",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 0),
- }, {
- .name = "dma",
- .devname = "dma-pl330.1",
- .enable = exynos4_clk_ip_fsys_ctrl,
- .ctrlbit = (1 << 1),
- }, {
.name = "adc",
.enable = exynos4_clk_ip_peril_ctrl,
.ctrlbit = (1 << 15),
@@ -778,6 +768,20 @@
}
};
+static struct clk clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+};
+
+static struct clk clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos4_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
struct clk *clkset_group_list[] = {
[0] = &clk_ext_xtal_mux,
[1] = &clk_xusbxti,
@@ -1009,46 +1013,6 @@
static struct clksrc_clk clksrcs[] = {
{
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.0",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 0),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.1",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 4),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.2",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.3",
- .enable = exynos4_clksrc_mask_peril0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
- }, {
.clk = {
.name = "sclk_pwm",
.enable = exynos4_clksrc_mask_peril0_ctrl,
@@ -1147,36 +1111,6 @@
.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 20),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .enable = exynos4_clksrc_mask_peril1_ctrl,
- .ctrlbit = (1 << 24),
- },
- .sources = &clkset_group,
- .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
- }, {
- .clk = {
.name = "sclk_fimg2d",
},
.sources = &clkset_mout_g2d,
@@ -1192,42 +1126,6 @@
.reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_dout_mmc0.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 0),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_dout_mmc1.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 4),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_dout_mmc2.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 8),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_dout_mmc3.clk,
- .enable = exynos4_clksrc_mask_fsys_ctrl,
- .ctrlbit = (1 << 12),
- },
- .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
- }, {
- .clk = {
.name = "sclk_dwmmc",
.parent = &clk_dout_mmc4.clk,
.enable = exynos4_clksrc_mask_fsys_ctrl,
@@ -1237,6 +1135,134 @@
}
};
+static struct clksrc_clk clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos4_clksrc_mask_peril0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_dout_mmc0.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_dout_mmc1.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_dout_mmc2.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_dout_mmc3.clk,
+ .enable = exynos4_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .enable = exynos4_clksrc_mask_peril1_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &clkset_group,
+ .reg_src = { .reg = S5P_CLKSRC_PERIL1, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLKDIV_PERIL2, .shift = 0, .size = 4 },
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1271,6 +1297,42 @@
&clk_mout_mfc1,
};
+static struct clk *clk_cdev[] = {
+ &clk_pdma0,
+ &clk_pdma1,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart0,
+ &clk_sclk_uart1,
+ &clk_sclk_uart2,
+ &clk_sclk_uart3,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_mmc3,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_spi2,
+
+};
+
+static struct clk_lookup exynos4_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &clk_pdma1),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &clk_sclk_spi2.clk),
+};
+
static int xtal_rate;
static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
@@ -1478,11 +1540,19 @@
for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
s3c_register_clksrc(sclk_tv[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
+
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(exynos4_clk_lookup, ARRAY_SIZE(exynos4_clk_lookup));
register_syscore_ops(&exynos4_clock_syscore_ops);
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-exynos/cpu.c b/arch/arm/mach-exynos/cpu.c
index 90ec247..0eb7b6a 100644
--- a/arch/arm/mach-exynos/cpu.c
+++ b/arch/arm/mach-exynos/cpu.c
@@ -10,6 +10,8 @@
#include <linux/sched.h>
#include <linux/sysdev.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
@@ -218,13 +220,26 @@
(gic_bank_offset * smp_processor_id());
}
+#ifdef CONFIG_OF
+static const struct of_device_id exynos4_dt_irq_match[] = {
+ { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+ {},
+};
+#endif
+
void __init exynos4_init_irq(void)
{
int irq;
gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
- gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+ if (!of_have_populated_dt())
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+ else
+ of_irq_init(exynos4_dt_irq_match);
+#endif
+
gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
new file mode 100644
index 0000000..b8e75300
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-ohci.c
@@ -0,0 +1,52 @@
+/* linux/arch/arm/mach-exynos/dev-ohci.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - OHCI support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <mach/ohci.h>
+
+#include <plat/devs.h>
+#include <plat/usb-phy.h>
+
+static struct resource exynos4_ohci_resource[] = {
+ [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
+ [1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
+};
+
+static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device exynos4_device_ohci = {
+ .name = "exynos-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(exynos4_ohci_resource),
+ .resource = exynos4_ohci_resource,
+ .dev = {
+ .dma_mask = &exynos4_ohci_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ }
+};
+
+void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
+{
+ struct exynos4_ohci_platdata *npd;
+
+ npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
+ &exynos4_device_ohci);
+
+ if (!npd->phy_init)
+ npd->phy_init = s5p_usb_phy_init;
+ if (!npd->phy_exit)
+ npd->phy_exit = s5p_usb_phy_exit;
+}
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 9667c61..b10fcd2 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -24,6 +24,7 @@
#include <linux/dma-mapping.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl330.h>
+#include <linux/of.h>
#include <asm/irq.h>
#include <plat/devs.h>
@@ -35,95 +36,42 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[28] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ2,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_SLIMBUS0_RX,
+ DMACH_SLIMBUS0_TX,
+ DMACH_SLIMBUS2_RX,
+ DMACH_SLIMBUS2_TX,
+ DMACH_SLIMBUS4_RX,
+ DMACH_SLIMBUS4_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
};
struct dma_pl330_platdata exynos4_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device exynos4_device_pdma0 = {
@@ -142,86 +90,37 @@
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[25] = {
- {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SLIMBUS5_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma1_peri[] = {
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ3,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_SLIMBUS1_RX,
+ DMACH_SLIMBUS1_TX,
+ DMACH_SLIMBUS3_RX,
+ DMACH_SLIMBUS3_TX,
+ DMACH_SLIMBUS5_RX,
+ DMACH_SLIMBUS5_TX,
};
struct dma_pl330_platdata exynos4_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device exynos4_device_pdma1 = {
@@ -242,7 +141,15 @@
static int __init exynos4_dma_init(void)
{
+ if (of_have_populated_dt())
+ return 0;
+
+ dma_cap_set(DMA_SLAVE, exynos4_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos4_pdma0_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, exynos4_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, exynos4_pdma1_pdata.cap_mask);
amba_device_register(&exynos4_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S
index f5e9fd8..d7dfcd7 100644
--- a/arch/arm/mach-exynos/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos/include/mach/entry-macro.S
@@ -72,7 +72,6 @@
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
- addne \irqnr, \irqnr, #32
.endm
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index dfd4b7e..f77bce0 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -17,13 +17,13 @@
/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x) S5P_IRQ(x+16)
+#define IRQ_PPI(x) (x+16)
#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x) S5P_IRQ(x+32)
+#define IRQ_SPI(x) (x+32)
#define IRQ_EINT0 IRQ_SPI(16)
#define IRQ_EINT1 IRQ_SPI(17)
@@ -72,6 +72,9 @@
#define IRQ_IIC5 IRQ_SPI(63)
#define IRQ_IIC6 IRQ_SPI(64)
#define IRQ_IIC7 IRQ_SPI(65)
+#define IRQ_SPI0 IRQ_SPI(66)
+#define IRQ_SPI1 IRQ_SPI(67)
+#define IRQ_SPI2 IRQ_SPI(68)
#define IRQ_USB_HOST IRQ_SPI(70)
#define IRQ_USB_HSOTG IRQ_SPI(71)
@@ -163,7 +166,9 @@
#define IRQ_GPIO2_NR_GROUPS 9
#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+
/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_GPIO_END + 64)
+#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 058541d..05ff187 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -87,6 +87,10 @@
#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
+#define EXYNOS4_PA_SPI0 0x13920000
+#define EXYNOS4_PA_SPI1 0x13930000
+#define EXYNOS4_PA_SPI2 0x13940000
+
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
@@ -107,6 +111,7 @@
#define EXYNOS4_PA_SROMC 0x12570000
#define EXYNOS4_PA_EHCI 0x12580000
+#define EXYNOS4_PA_OHCI 0x12590000
#define EXYNOS4_PA_HSPHY 0x125B0000
#define EXYNOS4_PA_MFC 0x13400000
@@ -148,6 +153,9 @@
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S3C_PA_UART EXYNOS4_PA_UART
+#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
+#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
+#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
#define S5P_PA_EHCI EXYNOS4_PA_EHCI
diff --git a/arch/arm/mach-exynos/include/mach/ohci.h b/arch/arm/mach-exynos/include/mach/ohci.h
new file mode 100644
index 0000000..c256c59
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/ohci.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MACH_EXYNOS_OHCI_H
+#define __MACH_EXYNOS_OHCI_H
+
+struct exynos4_ohci_platdata {
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd);
+
+#endif /* __MACH_EXYNOS_OHCI_H */
diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h
new file mode 100644
index 0000000..576efdf
--- /dev/null
+++ b/arch/arm/mach-exynos/include/mach/spi-clocks.h
@@ -0,0 +1,16 @@
+/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h
+ *
+ * Copyright (C) 2011 Samsung Electronics Co. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_SPI_CLKS_H
+#define __ASM_ARCH_SPI_CLKS_H __FILE__
+
+/* Must source from SCLK_SPI */
+#define EXYNOS4_SPI_SRCCLK_SCLK 0
+
+#endif /* __ASM_ARCH_SPI_CLKS_H */
diff --git a/arch/arm/mach-exynos/init.c b/arch/arm/mach-exynos/init.c
index a8a83e3..5b35978 100644
--- a/arch/arm/mach-exynos/init.c
+++ b/arch/arm/mach-exynos/init.c
@@ -14,29 +14,14 @@
#include <plat/devs.h>
#include <plat/regs-serial.h>
-static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
- [0] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
/* uart registration process */
void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->has_fracval = 1;
- tcfg->clocks = exynos4_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
- }
- tcfg->flags |= NO_NEED_CHECK_CLKSRC;
- }
+ for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
+ tcfg->has_fracval = 1;
- s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
+ s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
new file mode 100644
index 0000000..85fa027
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -0,0 +1,85 @@
+/*
+ * Samsung's Exynos4210 flattened device tree enabled machine
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2010-2011 Linaro Ltd.
+ * www.linaro.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the Exynos4 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART1,
+ "exynos4210-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART2,
+ "exynos4210-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", S5P_PA_UART3,
+ "exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(0),
+ "exynos4-sdhci.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(1),
+ "exynos4-sdhci.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(2),
+ "exynos4-sdhci.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-sdhci", EXYNOS4_PA_HSMMC(3),
+ "exynos4-sdhci.3", NULL),
+ OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0),
+ "s3c2440-i2c.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL),
+ {},
+};
+
+static void __init exynos4210_dt_map_io(void)
+{
+ s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos4210_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos4210_auxdata_lookup, NULL);
+}
+
+static char const *exynos4210_dt_compat[] __initdata = {
+ "samsung,exynos4210",
+ NULL
+};
+
+DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
+ /* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
+ .init_irq = exynos4_init_irq,
+ .map_io = exynos4210_dt_map_io,
+ .init_machine = exynos4210_dt_machine_init,
+ .timer = &exynos4_timer,
+ .dt_compat = exynos4210_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index f80b563..b805e59 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -41,6 +41,7 @@
#include <plat/fb.h>
#include <plat/mfc.h>
+#include <mach/ohci.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -483,6 +484,16 @@
s5p_ehci_set_platdata(pdata);
}
+/* USB OHCI */
+static struct exynos4_ohci_platdata origen_ohci_pdata;
+
+static void __init origen_ohci_init(void)
+{
+ struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
+
+ exynos4_ohci_set_platdata(pdata);
+}
+
static struct gpio_keys_button origen_gpio_keys_table[] = {
{
.code = KEY_MENU,
@@ -606,6 +617,7 @@
&s5p_device_mfc_l,
&s5p_device_mfc_r,
&s5p_device_mixer,
+ &exynos4_device_ohci,
&exynos4_device_pd[PD_LCD0],
&exynos4_device_pd[PD_TV],
&exynos4_device_pd[PD_G3D],
@@ -670,6 +682,7 @@
s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
origen_ehci_init();
+ origen_ohci_init();
clk_xusbxti.rate = 24000000;
s5p_tv_setup();
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index cec2afa..25a5a40 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -42,6 +42,7 @@
#include <plat/clock.h>
#include <mach/map.h>
+#include <mach/ohci.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -245,6 +246,16 @@
s5p_ehci_set_platdata(pdata);
}
+/* USB OHCI */
+static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
+
+static void __init smdkv310_ohci_init(void)
+{
+ struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
+
+ exynos4_ohci_set_platdata(pdata);
+}
+
static struct platform_device *smdkv310_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
@@ -261,6 +272,7 @@
&s5p_device_fimc3,
&exynos4_device_ac97,
&exynos4_device_i2s0,
+ &exynos4_device_ohci,
&samsung_device_keypad,
&s5p_device_mfc,
&s5p_device_mfc_l,
@@ -363,6 +375,7 @@
s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
smdkv310_ehci_init();
+ smdkv310_ohci_init();
clk_xusbxti.rate = 24000000;
platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 97343df..85b5527 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -44,8 +44,6 @@
char name[10];
};
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
static void exynos4_mct_write(unsigned int value, void *addr)
{
void __iomem *stat_addr;
@@ -264,6 +262,9 @@
}
#ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
/* Clock event handling */
static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
{
@@ -428,9 +429,13 @@
void local_timer_stop(struct clock_event_device *evt)
{
+ unsigned int cpu = smp_processor_id();
evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
if (mct_int_type == MCT_INT_SPI)
- disable_irq(evt->irq);
+ if (cpu == 0)
+ remove_irq(evt->irq, &mct_tick0_event_irq);
+ else
+ remove_irq(evt->irq, &mct_tick1_event_irq);
else
disable_percpu_irq(IRQ_MCT_LOCALTIMER);
}
@@ -443,6 +448,7 @@
clk_rate = clk_get_rate(mct_clk);
+#ifdef CONFIG_LOCAL_TIMERS
if (mct_int_type == MCT_INT_PPI) {
int err;
@@ -452,6 +458,7 @@
WARN(err, "MCT: can't request IRQ %d (%d)\n",
IRQ_MCT_LOCALTIMER, err);
}
+#endif /* CONFIG_LOCAL_TIMERS */
}
static void __init exynos4_timer_init(void)
diff --git a/arch/arm/mach-exynos/setup-sdhci.c b/arch/arm/mach-exynos/setup-sdhci.c
deleted file mode 100644
index 92937b4..0000000
--- a/arch/arm/mach-exynos/setup-sdhci.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *exynos4_hsmmc_clksrcs[4] = {
- [0] = NULL,
- [1] = NULL,
- [2] = "sclk_mmc", /* mmc_bus */
- [3] = NULL,
-};
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
new file mode 100644
index 0000000..833ff40
--- /dev/null
+++ b/arch/arm/mach-exynos/setup-spi.c
@@ -0,0 +1,72 @@
+/* linux/arch/arm/mach-exynos4/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .clk_from_cmu = true,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .clk_from_cmu = true,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .clk_from_cmu = true,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
+ s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
+ S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
index 39aca04..41743d2 100644
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ b/arch/arm/mach-exynos/setup-usb-phy.c
@@ -19,6 +19,13 @@
#include <plat/cpu.h>
#include <plat/usb-phy.h>
+static atomic_t host_usage;
+
+static int exynos4_usb_host_phy_is_on(void)
+{
+ return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
+}
+
static int exynos4_usb_phy1_init(struct platform_device *pdev)
{
struct clk *otg_clk;
@@ -27,6 +34,8 @@
u32 rstcon;
int err;
+ atomic_inc(&host_usage);
+
otg_clk = clk_get(&pdev->dev, "otg");
if (IS_ERR(otg_clk)) {
dev_err(&pdev->dev, "Failed to get otg clock\n");
@@ -39,6 +48,9 @@
return err;
}
+ if (exynos4_usb_host_phy_is_on())
+ return 0;
+
writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
S5P_USBHOST_PHY_CONTROL);
@@ -95,6 +107,9 @@
struct clk *otg_clk;
int err;
+ if (atomic_dec_return(&host_usage) > 0)
+ return 0;
+
otg_clk = clk_get(&pdev->dev, "otg");
if (IS_ERR(otg_clk)) {
dev_err(&pdev->dev, "Failed to get otg clock\n");
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 7a60bbb..f0d236d 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -120,8 +120,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(27),
- .end = gpio_to_irq(27),
+ .start = MMP_GPIO_TO_IRQ(27),
+ .end = MMP_GPIO_TO_IRQ(27),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -232,6 +232,7 @@
pxa168_add_nand(&aspenite_nand_info);
pxa168_add_fb(&aspenite_lcd_info);
pxa168_add_keypad(&aspenite_keypad_info);
+ platform_device_register(&pxa168_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/avengers_lite.c b/arch/arm/mach-mmp/avengers_lite.c
index 39f0878..c5d53e0 100644
--- a/arch/arm/mach-mmp/avengers_lite.c
+++ b/arch/arm/mach-mmp/avengers_lite.c
@@ -38,6 +38,7 @@
/* on-chip devices */
pxa168_add_uart(2);
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(AVENGERS_LITE, "PXA168 Avengers lite Development Platform")
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index 983cfb1..eb07565 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -202,6 +202,7 @@
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(3);
+ platform_device_register(&mmp2_device_gpio);
mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info));
mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */
mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */
diff --git a/arch/arm/mach-mmp/flint.c b/arch/arm/mach-mmp/flint.c
index c4fd806..c1f0aa8 100644
--- a/arch/arm/mach-mmp/flint.c
+++ b/arch/arm/mach-mmp/flint.c
@@ -87,8 +87,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(155),
- .end = gpio_to_irq(155),
+ .start = MMP_GPIO_TO_IRQ(155),
+ .end = MMP_GPIO_TO_IRQ(155),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -110,6 +110,7 @@
/* on-chip devices */
mmp2_add_uart(1);
mmp2_add_uart(2);
+ platform_device_register(&mmp2_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 4665767..e266f66 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -184,6 +184,7 @@
pxa168_add_uart(3);
pxa168_add_ssp(1);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
+ platform_device_register(&pxa168_device_gpio);
pxa168_add_eth(&gplugd_eth_platform_data);
}
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
index 99b4ce1..0e135a5 100644
--- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -2,6 +2,7 @@
#define __ASM_MACH_GPIO_PXA_H
#include <mach/addr-map.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000)
@@ -9,8 +10,6 @@
#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-#define NR_BUILTIN_GPIO IRQ_GPIO_NUM
-
#define gpio_to_bank(gpio) ((gpio) >> 5)
/* NOTE: these macros are defined here to make optimization of
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 6812623..13219eb 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -3,11 +3,6 @@
#include <asm-generic/gpio.h>
-#define gpio_to_irq(gpio) (IRQ_GPIO_START + (gpio))
-#define irq_to_gpio(irq) ((irq) - IRQ_GPIO_START)
+#include <mach/cputype.h>
-#define __gpio_is_inverted(gpio) (0)
-#define __gpio_is_occupied(gpio) (0)
-
-#include <plat/gpio.h>
#endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index a09d328..34635a0 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -219,10 +219,10 @@
#define IRQ_MMP2_MUX_END (IRQ_MMP2_SSP_BASE + 2)
#define IRQ_GPIO_START 128
-#define IRQ_GPIO_NUM 192
-#define IRQ_GPIO(x) (IRQ_GPIO_START + (x))
+#define MMP_NR_BUILTIN_GPIO 192
+#define MMP_GPIO_TO_IRQ(gpio) (IRQ_GPIO_START + (gpio))
-#define IRQ_BOARD_START (IRQ_GPIO_START + IRQ_GPIO_NUM)
+#define IRQ_BOARD_START (IRQ_GPIO_START + MMP_NR_BUILTIN_GPIO)
#define NR_IRQS (IRQ_BOARD_START)
diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h
index 2f7b2d3..cba22fe 100644
--- a/arch/arm/mach-mmp/include/mach/mmp2.h
+++ b/arch/arm/mach-mmp/include/mach/mmp2.h
@@ -32,6 +32,8 @@
extern struct pxa_device_desc mmp2_device_asram;
extern struct pxa_device_desc mmp2_device_isram;
+extern struct platform_device mmp2_device_gpio;
+
static inline int mmp2_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 7fb568d..f928608 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -42,6 +42,8 @@
/* pdata can be NULL */
int __init pxa168_add_usb_host(struct pxa168_usb_pdata *pdata);
+extern struct platform_device pxa168_device_gpio;
+
static inline int pxa168_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 91be755..4de13ab 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -21,6 +21,8 @@
extern struct pxa_device_desc pxa910_device_pwm4;
extern struct pxa_device_desc pxa910_device_nand;
+extern struct platform_device pxa910_device_gpio;
+
static inline int pxa910_add_uart(int id)
{
struct pxa_device_desc *d = NULL;
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 5dd1d4a..617c60a 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -13,6 +13,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/hardware/cache-tauros2.h>
@@ -24,7 +25,6 @@
#include <mach/irqs.h>
#include <mach/dma.h>
#include <mach/mfp.h>
-#include <mach/gpio-pxa.h>
#include <mach/devices.h>
#include <mach/mmp2.h>
@@ -33,8 +33,6 @@
#define MFPR_VIRT_BASE (APB_VIRT_BASE + 0x1e000)
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x9c)
-
static struct mfp_addr_map mmp2_addr_map[] __initdata = {
MFP_ADDR_X(GPIO0, GPIO58, 0x54),
@@ -95,24 +93,9 @@
__raw_writel(data, mfpr_pmic);
}
-static void __init mmp2_init_gpio(void)
-{
- int i;
-
- /* enable GPIO clock */
- __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_MMP2_GPIO);
-
- /* unmask GPIO edge detection for all 6 banks -- APMASKx */
- for (i = 0; i < 6; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_MMP2_GPIO, 0, 167, NULL);
-}
-
void __init mmp2_init_irq(void)
{
mmp2_init_icu();
- mmp2_init_gpio();
}
static void sdhc_clk_enable(struct clk *clk)
@@ -149,6 +132,7 @@
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
+static APBC_CLK(gpio, MMP2_GPIO, 0, 26000000);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
static APMU_CLK_OPS(sdh0, SDH0, 0x1b, 200000000, &sdhc_clk_ops);
@@ -168,6 +152,7 @@
INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL),
INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"),
INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"),
@@ -230,3 +215,21 @@
/* 0xd1000000 ~ 0xd101ffff is reserved for secure processor */
MMP2_DEVICE(isram, "isram", -1, NONE, 0xd1020000, 0x18000);
+struct resource mmp2_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_MMP2_GPIO,
+ .end = IRQ_MMP2_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device mmp2_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(mmp2_resource_gpio),
+ .resource = mmp2_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 76ca15c..8424503 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -13,6 +13,7 @@
#include <linux/list.h>
#include <linux/io.h>
#include <linux/clk.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -20,7 +21,6 @@
#include <mach/regs-apbc.h>
#include <mach/regs-apmu.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/devices.h>
#include <mach/mfp.h>
@@ -43,26 +43,9 @@
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
-static void __init pxa168_init_gpio(void)
-{
- int i;
-
- /* enable GPIO clock */
- __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA168_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA168_GPIOX, 0, 127, NULL);
-}
-
void __init pxa168_init_irq(void)
{
icu_init_irq();
- pxa168_init_gpio();
}
/* APB peripheral clocks */
@@ -80,6 +63,7 @@
static APBC_CLK(ssp3, PXA168_SSP3, 4, 0);
static APBC_CLK(ssp4, PXA168_SSP4, 4, 0);
static APBC_CLK(ssp5, PXA168_SSP5, 4, 0);
+static APBC_CLK(gpio, PXA168_GPIO, 0, 13000000);
static APBC_CLK(keypad, PXA168_KPC, 0, 32000);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
@@ -105,6 +89,7 @@
INIT_CLKREG(&clk_ssp5, "pxa168-ssp.4", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL),
INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"),
INIT_CLKREG(&clk_usb, "pxa168-ehci", "PXA168-USBCLK"),
@@ -174,6 +159,25 @@
PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c);
PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff);
+struct resource pxa168_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA168_GPIOX,
+ .end = IRQ_PXA168_GPIOX,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa168_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa168_resource_gpio),
+ .resource = pxa168_resource_gpio,
+};
+
struct resource pxa168_usb_host_resources[] = {
/* USB Host conroller register base */
[0] = {
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 4ebbfbb..3241a25 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -12,6 +12,7 @@
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <asm/mach/time.h>
#include <mach/addr-map.h>
@@ -19,7 +20,6 @@
#include <mach/regs-apmu.h>
#include <mach/cputype.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include <mach/dma.h>
#include <mach/mfp.h>
#include <mach/devices.h>
@@ -77,26 +77,9 @@
MFP_ADDR_END,
};
-#define APMASK(i) (GPIO_REGS_VIRT + BANK_OFF(i) + 0x09c)
-
-static void __init pxa910_init_gpio(void)
-{
- int i;
-
- /* enable GPIO clock */
- __raw_writel(APBC_APBCLK | APBC_FNCLK, APBC_PXA910_GPIO);
-
- /* unmask GPIO edge detection for all 4 banks - APMASKx */
- for (i = 0; i < 4; i++)
- __raw_writel(0xffffffff, APMASK(i));
-
- pxa_init_gpio(IRQ_PXA910_AP_GPIO, 0, 127, NULL);
-}
-
void __init pxa910_init_irq(void)
{
icu_init_irq();
- pxa910_init_gpio();
}
/* APB peripheral clocks */
@@ -108,6 +91,7 @@
static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
+static APBC_CLK(gpio, PXA910_GPIO, 0, 13000000);
static APMU_CLK(nand, NAND, 0x19b, 156000000);
static APMU_CLK(u2o, USB, 0x1b, 480000000);
@@ -123,6 +107,7 @@
INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
+ INIT_CLKREG(&clk_gpio, "pxa-gpio", NULL),
INIT_CLKREG(&clk_u2o, "pxa-u2o", "U2OCLK"),
};
@@ -179,3 +164,22 @@
PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
+
+struct resource pxa910_resource_gpio[] = {
+ {
+ .start = 0xd4019000,
+ .end = 0xd4019fff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_PXA910_AP_GPIO,
+ .end = IRQ_PXA910_AP_GPIO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa910_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa910_resource_gpio),
+ .resource = pxa910_resource_gpio,
+};
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index eb5be87..bb2ddb7 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -19,6 +19,7 @@
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
+#include <mach/irqs.h>
#include "common.h"
@@ -71,8 +72,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(80),
- .end = gpio_to_irq(80),
+ .start = MMP_GPIO_TO_IRQ(80),
+ .end = MMP_GPIO_TO_IRQ(80),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -93,6 +94,7 @@
/* on-chip devices */
pxa910_add_uart(1);
+ platform_device_register(&pxa910_device_gpio);
/* off-chip devices */
platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/teton_bga.c b/arch/arm/mach-mmp/teton_bga.c
index bbe4727..703de85 100644
--- a/arch/arm/mach-mmp/teton_bga.c
+++ b/arch/arm/mach-mmp/teton_bga.c
@@ -66,7 +66,7 @@
static struct i2c_board_info teton_bga_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("ds1337", 0x68),
- .irq = gpio_to_irq(RTC_INT_GPIO)
+ .irq = MMP_GPIO_TO_IRQ(RTC_INT_GPIO)
},
};
@@ -78,6 +78,7 @@
pxa168_add_uart(1);
pxa168_add_keypad(&teton_bga_keypad_info);
pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(teton_bga_i2c_info));
+ platform_device_register(&pxa168_device_gpio);
}
MACHINE_START(TETON_BGA, "PXA168-based Teton BGA Development Platform")
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 176515a..a80ed26 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -24,12 +24,13 @@
#include <mach/addr-map.h>
#include <mach/mfp-pxa910.h>
#include <mach/pxa910.h>
+#include <mach/irqs.h>
#include "common.h"
-#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
+#define TTCDKB_GPIO_EXT0(x) (MMP_NR_BUILTIN_GPIO + ((x < 0) ? 0 : \
((x < 16) ? x : 15)))
-#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
+#define TTCDKB_GPIO_EXT1(x) (MMP_NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \
((x < 16) ? x : 15)))
/*
@@ -122,6 +123,7 @@
};
static struct platform_device *ttc_dkb_devices[] = {
+ &pxa910_device_gpio,
&ttc_dkb_device_onenand,
};
@@ -136,7 +138,7 @@
{
.type = "max7312",
.addr = 0x23,
- .irq = IRQ_GPIO(80),
+ .irq = MMP_GPIO_TO_IRQ(80),
.platform_data = &max7312_data,
},
};
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 5c837603..24994bb 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -362,7 +362,7 @@
{
iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
- PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+ PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
imx51_soc_init();
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c
index 6bea31a..64bbfce 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-mx5/board-mx53_evk.c
@@ -106,7 +106,7 @@
gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c
index 7678f77..237bdec 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-mx5/board-mx53_loco.c
@@ -242,7 +242,7 @@
gpio_set_value(LOCO_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c
index 59c0845..d42132a 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-mx5/board-mx53_smd.c
@@ -104,7 +104,7 @@
gpio_set_value(SMD_FEC_PHY_RST, 1);
}
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
.phy = PHY_INTERFACE_MODE_RMII,
};
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index da6e4aa..df0ad3c 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -22,6 +22,7 @@
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/clkdev.h>
+#include <linux/spinlock.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
@@ -29,6 +30,7 @@
#include <mach/mx28.h>
#include <mach/common.h>
#include <mach/clock.h>
+#include <mach/digctl.h>
#include "regs-clkctrl-mx28.h"
@@ -43,6 +45,33 @@
static struct clk saif0_clk;
static struct clk saif1_clk;
static struct clk clk32k_clk;
+static DEFINE_SPINLOCK(clkmux_lock);
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ * DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ * clock pins selected for SAIF1 input clocks.
+ * CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ * SAIF0 clock inputs selected for SAIF1 input clocks.
+ * EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ * EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ * clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+ if (clkmux > 0x3)
+ return -EINVAL;
+
+ spin_lock(&clkmux_lock);
+ __raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
+ DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
+ __raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
+ DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
+ spin_unlock(&clkmux_lock);
+
+ return 0;
+}
static int _raw_clk_enable(struct clk *clk)
{
@@ -785,6 +814,15 @@
clk_set_parent(&saif0_clk, &pll0_clk);
clk_set_parent(&saif1_clk, &pll0_clk);
+ /*
+ * Set an initial clock rate for the saif internal logic to work
+ * properly. This is important when working in EXTMASTER mode that
+ * uses the other saif's BITCLK&LRCLK but it still needs a basic
+ * clock which should be fast enough for the internal logic.
+ */
+ clk_set_rate(&saif0_clk, 24000000);
+ clk_set_rate(&saif1_clk, 24000000);
+
clkdev_add_table(lookups, ARRAY_SIZE(lookups));
mxs_timer_init(&clk32k_clk, MX28_INT_TIMER0);
diff --git a/arch/arm/mach-mxs/devices-mx28.h b/arch/arm/mach-mxs/devices-mx28.h
index c888710..4f50094 100644
--- a/arch/arm/mach-mxs/devices-mx28.h
+++ b/arch/arm/mach-mxs/devices-mx28.h
@@ -47,6 +47,7 @@
const struct mxsfb_platform_data *pdata);
extern const struct mxs_saif_data mx28_saif_data[] __initconst;
-#define mx28_add_saif(id) mxs_add_saif(&mx28_saif_data[id])
+#define mx28_add_saif(id, pdata) \
+ mxs_add_saif(&mx28_saif_data[id], pdata)
struct platform_device *__init mx28_add_rtc_stmp3xxx(void);
diff --git a/arch/arm/mach-mxs/devices/platform-mxs-saif.c b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
index 1ec965e..f6e3a60 100644
--- a/arch/arm/mach-mxs/devices/platform-mxs-saif.c
+++ b/arch/arm/mach-mxs/devices/platform-mxs-saif.c
@@ -32,7 +32,8 @@
};
#endif
-struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data)
+struct platform_device *__init mxs_add_saif(const struct mxs_saif_data *data,
+ const struct mxs_saif_platform_data *pdata)
{
struct resource res[] = {
{
@@ -56,5 +57,5 @@
};
return mxs_add_platform_device("mxs-saif", data->id, res,
- ARRAY_SIZE(res), NULL, 0);
+ ARRAY_SIZE(res), pdata, sizeof(*pdata));
}
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d..3bbb94f 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@
extern const u32 *mxs_get_ocotp(void);
extern int mxs_reset_block(void __iomem *);
extern void mxs_timer_init(struct clk *, int);
+extern int mxs_saif_clkmux_select(unsigned int clkmux);
extern int mx23_register_gpios(void);
extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h
index a8080f4..dc369c1 100644
--- a/arch/arm/mach-mxs/include/mach/devices-common.h
+++ b/arch/arm/mach-mxs/include/mach/devices-common.h
@@ -94,6 +94,7 @@
resource_size_t iobase, int id);
/* saif */
+#include <sound/saif.h>
struct mxs_saif_data {
int id;
resource_size_t iobase;
@@ -103,4 +104,5 @@
};
struct platform_device *__init mxs_add_saif(
- const struct mxs_saif_data *data);
+ const struct mxs_saif_data *data,
+ const struct mxs_saif_platform_data *pdata);
diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
new file mode 100644
index 0000000..49a888c
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/digctl.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_DIGCTL_H__
+#define __MACH_DIGCTL_H__
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT 0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT 0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0 0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1 0x3
+
+#define HW_DIGCTL_CTRL 0x0
+#define BP_DIGCTL_CTRL_SAIF_CLKMUX 10
+#define BM_DIGCTL_CTRL_SAIF_CLKMUX (0x3 << 10)
+#endif
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 064ec5a..ac84a10 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -27,6 +27,7 @@
#include <mach/common.h>
#include <mach/iomux-mx28.h>
+#include <mach/digctl.h>
#include "devices-mx28.h"
@@ -421,6 +422,18 @@
{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
};
+static const struct mxs_saif_platform_data
+ mx28evk_mxs_saif_pdata[] __initconst = {
+ /* working on EXTMSTR0 mode (saif0 master, saif1 slave) */
+ {
+ .master_mode = 1,
+ .master_id = 0,
+ }, {
+ .master_mode = 0,
+ .master_id = 0,
+ },
+};
+
static void __init mx28evk_init(void)
{
int ret;
@@ -454,8 +467,9 @@
else
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
- mx28_add_saif(0);
- mx28_add_saif(1);
+ mxs_saif_clkmux_select(MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0);
+ mx28_add_saif(0, &mx28evk_mxs_saif_pdata[0]);
+ mx28_add_saif(1, &mx28evk_mxs_saif_pdata[1]);
mx28_add_mxs_i2c(0);
i2c_register_board_info(0, mxs_i2c0_board_info,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 5156468..ba23224 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -404,6 +404,7 @@
{
.mmc = 5,
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
+ .pm_caps = MMC_PM_KEEP_POWER,
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.ocr_mask = MMC_VDD_165_195,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d314f03..f7df8d3 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -24,6 +24,7 @@
#include <linux/i2c/pca953x.h>
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
+#include <linux/mmc/host.h>
#include <mach/hardware.h>
#include <mach/am35xx.h>
@@ -40,6 +41,7 @@
#include "mux.h"
#include "control.h"
+#include "hsmmc.h"
#define AM35XX_EVM_MDIO_FREQUENCY (1000000)
@@ -455,6 +457,23 @@
static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
};
+static struct omap2_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = 127,
+ .gpio_wp = 126,
+ },
+ {
+ .mmc = 2,
+ .caps = MMC_CAP_4_BIT_DATA,
+ .gpio_cd = 128,
+ .gpio_wp = 129,
+ },
+ {} /* Terminator */
+};
+
+
static void __init am3517_evm_init(void)
{
omap_board_config = am3517_evm_config;
@@ -483,6 +502,9 @@
/* MUSB */
am3517_evm_musb_init();
+
+ /* MMC init function */
+ omap2_hsmmc_init(mmc);
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index ba1aa07..c15c5c9 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -193,7 +193,7 @@
static void __init rx51_charger_init(void)
{
WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
- GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+ GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
platform_device_register(&rx51_charger_device);
}
diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c
index 5d0064a..9d59451 100644
--- a/arch/arm/mach-omap2/clock3xxx_data.c
+++ b/arch/arm/mach-omap2/clock3xxx_data.c
@@ -2480,6 +2480,16 @@
.recalc = &followparent_recalc,
};
+static struct clk uart4_fck_am35xx = {
+ .name = "uart4_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &per_48m_fck,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_UART4_SHIFT,
+ .clkdm_name = "core_l4_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.ops = &clkops_omap2_dflt_wait,
@@ -3287,7 +3297,7 @@
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "ts_fck", &ts_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK("usbhs_omap", "usbtll_fck", &usbtll_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX),
CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX),
@@ -3323,7 +3333,7 @@
CLK(NULL, "pka_ick", &pka_ick, CK_34XX | CK_36XX),
CLK(NULL, "core_l4_ick", &core_l4_ick, CK_3XXX),
CLK(NULL, "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK("usbhs_omap", "usbtll_ick", &usbtll_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK("omap_hsmmc.2", "ick", &mmchs3_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "icr_ick", &icr_ick, CK_34XX | CK_36XX),
CLK("omap-aes", "ick", &aes2_ick, CK_34XX | CK_36XX),
@@ -3369,20 +3379,18 @@
CLK(NULL, "cam_ick", &cam_ick, CK_34XX | CK_36XX),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_34XX | CK_36XX),
CLK(NULL, "usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "hs_fck", &usbhost_120m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "fs_fck", &usbhost_48m_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
CLK(NULL, "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
- CLK("usbhs-omap.0", "utmi_p1_gfclk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "utmi_p2_gfclk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
- CLK("usbhs-omap.0", "init_60m_fclk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "usbhost_ick", &usbhost_ick, CK_3430ES2PLUS | CK_AM35XX | CK_36XX),
+ CLK("usbhs_omap", "utmi_p1_gfclk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "utmi_p2_gfclk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "xclk60mhsp1_ck", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "xclk60mhsp2_ck", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "usb_host_hs_utmi_p1_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "usb_host_hs_utmi_p2_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "usb_tll_hs_usb_ch0_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "usb_tll_hs_usb_ch1_clk", &dummy_ck, CK_3XXX),
+ CLK("usbhs_omap", "init_60m_fclk", &dummy_ck, CK_3XXX),
CLK(NULL, "usim_fck", &usim_fck, CK_3430ES2PLUS | CK_36XX),
CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX),
CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX),
@@ -3403,6 +3411,7 @@
CLK(NULL, "per_48m_fck", &per_48m_fck, CK_3XXX),
CLK(NULL, "uart3_fck", &uart3_fck, CK_3XXX),
CLK(NULL, "uart4_fck", &uart4_fck, CK_36XX),
+ CLK(NULL, "uart4_fck", &uart4_fck_am35xx, CK_3505 | CK_3517),
CLK(NULL, "gpt2_fck", &gpt2_fck, CK_3XXX),
CLK(NULL, "gpt3_fck", &gpt3_fck, CK_3XXX),
CLK(NULL, "gpt4_fck", &gpt4_fck, CK_3XXX),
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
index 0798a80..c8a1b27 100644
--- a/arch/arm/mach-omap2/clock44xx_data.c
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -3295,7 +3295,7 @@
CLK(NULL, "uart2_fck", &uart2_fck, CK_443X),
CLK(NULL, "uart3_fck", &uart3_fck, CK_443X),
CLK(NULL, "uart4_fck", &uart4_fck, CK_443X),
- CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X),
+ CLK("usbhs_omap", "fs_fck", &usb_host_fs_fck, CK_443X),
CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X),
CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X),
CLK(NULL, "utmi_p2_gfclk", &utmi_p2_gfclk, CK_443X),
@@ -3306,7 +3306,7 @@
CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X),
CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X),
- CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X),
+ CLK("usbhs_omap", "hs_fck", &usb_host_hs_fck, CK_443X),
CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X),
CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X),
CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X),
@@ -3314,7 +3314,7 @@
CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X),
CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X),
- CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
+ CLK("usbhs_omap", "usbtll_ick", &usb_tll_hs_ick, CK_443X),
CLK(NULL, "usim_ck", &usim_ck, CK_443X),
CLK(NULL, "usim_fclk", &usim_fclk, CK_443X),
CLK(NULL, "usim_fck", &usim_fck, CK_443X),
@@ -3374,8 +3374,8 @@
CLK(NULL, "uart2_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart3_ick", &dummy_ck, CK_443X),
CLK(NULL, "uart4_ick", &dummy_ck, CK_443X),
- CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X),
- CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X),
+ CLK("usbhs_omap", "usbhost_ick", &dummy_ck, CK_443X),
+ CLK("usbhs_omap", "usbtll_fck", &dummy_ck, CK_443X),
CLK("omap_wdt", "ick", &dummy_ck, CK_443X),
CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X),
CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X),
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index f4a1020..bd844af 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -171,6 +171,17 @@
}
}
+static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+{
+ u32 reg;
+
+ if (mmc->slots[0].internal_clock) {
+ reg = omap_ctrl_readl(control_devconf1_offset);
+ reg |= OMAP2_MMCSDIO2ADPCLKISEL;
+ omap_ctrl_writel(reg, control_devconf1_offset);
+ }
+}
+
static void hsmmc23_before_set_reg(struct device *dev, int slot,
int power_on, int vdd)
{
@@ -179,16 +190,19 @@
if (mmc->slots[0].remux)
mmc->slots[0].remux(dev, slot, power_on);
- if (power_on) {
- /* Only MMC2 supports a CLKIN */
- if (mmc->slots[0].internal_clock) {
- u32 reg;
+ if (power_on)
+ hsmmc2_select_input_clk_src(mmc);
+}
- reg = omap_ctrl_readl(control_devconf1_offset);
- reg |= OMAP2_MMCSDIO2ADPCLKISEL;
- omap_ctrl_writel(reg, control_devconf1_offset);
- }
- }
+static int am35x_hsmmc2_set_power(struct device *dev, int slot,
+ int power_on, int vdd)
+{
+ struct omap_mmc_platform_data *mmc = dev->platform_data;
+
+ if (power_on)
+ hsmmc2_select_input_clk_src(mmc);
+
+ return 0;
}
static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
@@ -200,10 +214,12 @@
static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin))
+ if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
+ (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp))
+ if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
+ (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
@@ -296,6 +312,7 @@
mmc->slots[0].name = hc_name;
mmc->nr_slots = 1;
mmc->slots[0].caps = c->caps;
+ mmc->slots[0].pm_caps = c->pm_caps;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
if (cpu_is_omap44xx())
@@ -336,11 +353,17 @@
*
* temporary HACK: ocr_mask instead of fixed supply
*/
- mmc->slots[0].ocr_mask = c->ocr_mask;
-
- if (cpu_is_omap3517() || cpu_is_omap3505())
- mmc->slots[0].set_power = nop_mmc_set_power;
+ if (cpu_is_omap3505() || cpu_is_omap3517())
+ mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ MMC_VDD_26_27 |
+ MMC_VDD_27_28 |
+ MMC_VDD_29_30 |
+ MMC_VDD_30_31 |
+ MMC_VDD_31_32;
else
+ mmc->slots[0].ocr_mask = c->ocr_mask;
+
+ if (!cpu_is_omap3517() && !cpu_is_omap3505())
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
@@ -363,6 +386,9 @@
}
}
+ if (cpu_is_omap3517() || cpu_is_omap3505())
+ mmc->slots[0].set_power = nop_mmc_set_power;
+
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
@@ -372,6 +398,9 @@
}
break;
case 2:
+ if (cpu_is_omap3517() || cpu_is_omap3505())
+ mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+
if (c->ext_clock)
c->transceiver = 1;
if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
diff --git a/arch/arm/mach-omap2/hsmmc.h b/arch/arm/mach-omap2/hsmmc.h
index f757e78..c440973 100644
--- a/arch/arm/mach-omap2/hsmmc.h
+++ b/arch/arm/mach-omap2/hsmmc.h
@@ -12,6 +12,7 @@
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
+ u32 pm_caps; /* PM capabilities */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index 292eee3..28fcb27 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -145,6 +145,9 @@
pdata->reg_size = 4;
pdata->has_ccr = true;
}
+ pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+ if (id == 1)
+ pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
if (id == 2)
@@ -174,9 +177,6 @@
name, oh->name);
return PTR_ERR(pdev);
}
- pdata->set_clk_src = omap2_mcbsp_set_clk_src;
- if (id == 1)
- pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
omap_mcbsp_count++;
return 0;
}
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 7f8915a..5324e8d 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -84,6 +84,8 @@
static struct omap_hwmod omap3xxx_mcbsp5_hwmod;
static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod;
static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod;
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod;
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod;
/* L3 -> L4_CORE interface */
static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_core = {
@@ -164,6 +166,7 @@
static struct omap_hwmod omap3xxx_uart2_hwmod;
static struct omap_hwmod omap3xxx_uart3_hwmod;
static struct omap_hwmod omap3xxx_uart4_hwmod;
+static struct omap_hwmod am35xx_uart4_hwmod;
static struct omap_hwmod omap3xxx_usbhsotg_hwmod;
/* l3_core -> usbhsotg interface */
@@ -299,6 +302,23 @@
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* AM35xx: L4 CORE -> UART4 interface */
+static struct omap_hwmod_addr_space am35xx_uart4_addr_space[] = {
+ {
+ .pa_start = OMAP3_UART4_AM35XX_BASE,
+ .pa_end = OMAP3_UART4_AM35XX_BASE + SZ_1K - 1,
+ .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT,
+ },
+};
+
+static struct omap_hwmod_ocp_if am35xx_l4_core__uart4 = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &am35xx_uart4_hwmod,
+ .clk = "uart4_ick",
+ .addr = am35xx_uart4_addr_space,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = {
.master = &omap3xxx_l4_core_hwmod,
@@ -1162,6 +1182,7 @@
SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -1309,6 +1330,39 @@
.class = &omap2_uart_class,
};
+static struct omap_hwmod_irq_info am35xx_uart4_mpu_irqs[] = {
+ { .irq = INT_35XX_UART4_IRQ, },
+};
+
+static struct omap_hwmod_dma_info am35xx_uart4_sdma_reqs[] = {
+ { .name = "rx", .dma_req = AM35XX_DMA_UART4_RX, },
+ { .name = "tx", .dma_req = AM35XX_DMA_UART4_TX, },
+};
+
+static struct omap_hwmod_ocp_if *am35xx_uart4_slaves[] = {
+ &am35xx_l4_core__uart4,
+};
+
+static struct omap_hwmod am35xx_uart4_hwmod = {
+ .name = "uart4",
+ .mpu_irqs = am35xx_uart4_mpu_irqs,
+ .sdma_reqs = am35xx_uart4_sdma_reqs,
+ .main_clk = "uart4_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_UART4_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_EN_UART4_SHIFT,
+ },
+ },
+ .slaves = am35xx_uart4_slaves,
+ .slaves_cnt = ARRAY_SIZE(am35xx_uart4_slaves),
+ .class = &omap2_uart_class,
+};
+
+
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
@@ -1636,7 +1690,7 @@
static struct omap_hwmod omap3xxx_i2c1_hwmod = {
.name = "i2c1",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@@ -1670,7 +1724,7 @@
static struct omap_hwmod omap3xxx_i2c2_hwmod = {
.name = "i2c2",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@@ -1715,7 +1769,7 @@
static struct omap_hwmod omap3xxx_i2c3_hwmod = {
.name = "i2c3",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = i2c3_mpu_irqs,
.sdma_reqs = i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@@ -3072,7 +3126,35 @@
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
-static struct omap_hwmod omap3xxx_mmc1_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+ .flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
+ OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc1_hwmod = {
+ .name = "mmc1",
+ .mpu_irqs = omap34xx_mmc1_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc1_sdma_reqs,
+ .opt_clks = omap34xx_mmc1_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks),
+ .main_clk = "mmchs1_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_MMC1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MMC1_SHIFT,
+ },
+ },
+ .dev_attr = &mmc1_pre_es3_dev_attr,
+ .slaves = omap3xxx_mmc1_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc1_slaves),
+ .class = &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc1_hwmod = {
.name = "mmc1",
.mpu_irqs = omap34xx_mmc1_mpu_irqs,
.sdma_reqs = omap34xx_mmc1_sdma_reqs,
@@ -3115,7 +3197,34 @@
&omap3xxx_l4_core__mmc2,
};
-static struct omap_hwmod omap3xxx_mmc2_hwmod = {
+/* See 35xx errata 2.1.1.128 in SPRZ278F */
+static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+ .flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
+};
+
+static struct omap_hwmod omap3xxx_pre_es3_mmc2_hwmod = {
+ .name = "mmc2",
+ .mpu_irqs = omap34xx_mmc2_mpu_irqs,
+ .sdma_reqs = omap34xx_mmc2_sdma_reqs,
+ .opt_clks = omap34xx_mmc2_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks),
+ .main_clk = "mmchs2_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430_EN_MMC2_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430_ST_MMC2_SHIFT,
+ },
+ },
+ .dev_attr = &mmc2_pre_es3_dev_attr,
+ .slaves = omap3xxx_mmc2_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_mmc2_slaves),
+ .class = &omap34xx_mmc_class,
+};
+
+static struct omap_hwmod omap3xxx_es3plus_mmc2_hwmod = {
.name = "mmc2",
.mpu_irqs = omap34xx_mmc2_mpu_irqs,
.sdma_reqs = omap34xx_mmc2_sdma_reqs,
@@ -3177,13 +3286,223 @@
.class = &omap34xx_mmc_class,
};
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap3xxx_usb_host_hs__l3_main_2 = {
+ .master = &omap3xxx_usb_host_hs_hwmod,
+ .slave = &omap3xxx_l3_main_hwmod,
+ .clk = "core_l3_ick",
+ .user = OCP_USER_MPU,
+};
+
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_CLOCKACTIVITY |
+ SYSC_HAS_SIDLEMODE | SYSC_HAS_ENAWAKEUP |
+ SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap3xxx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_masters[] = {
+ &omap3xxx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x48064000,
+ .pa_end = 0x480643ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x48064400,
+ .pa_end = 0x480647ff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x48064800,
+ .pa_end = 0x48064cff,
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_host_hs = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_usb_host_hs_hwmod,
+ .clk = "usbhost_ick",
+ .addr = omap3xxx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_host_hs_slaves[] = {
+ &omap3xxx_l4_core__usb_host_hs,
+};
+
+static struct omap_hwmod_opt_clk omap3xxx_usb_host_hs_opt_clks[] = {
+ { .role = "ehci_logic_fck", .clk = "usbhost_120m_fck", },
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 },
+ { .name = "ehci-irq", .irq = 77 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod omap3xxx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap3xxx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_host_hs_irqs,
+ .main_clk = "usbhost_48m_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = OMAP3430ES2_USBHOST_MOD,
+ .prcm_reg_id = 1,
+ .module_bit = OMAP3430ES2_EN_USBHOST1_SHIFT,
+ .idlest_reg_id = 1,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBHOST_IDLE_SHIFT,
+ .idlest_stdby_bit = OMAP3430ES2_ST_USBHOST_STDBY_SHIFT,
+ },
+ },
+ .opt_clks = omap3xxx_usb_host_hs_opt_clks,
+ .opt_clks_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_opt_clks),
+ .slaves = omap3xxx_usb_host_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_slaves),
+ .masters = omap3xxx_usb_host_hs_masters,
+ .masters_cnt = ARRAY_SIZE(omap3xxx_usb_host_hs_masters),
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap3xxx_usb_tll_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap3xxx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap3xxx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap3xxx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap3xxx_usb_tll_hs_addrs[] = {
+ {
+ .name = "tll",
+ .pa_start = 0x48062000,
+ .pa_end = 0x48062fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap3xxx_l4_core__usb_tll_hs = {
+ .master = &omap3xxx_l4_core_hwmod,
+ .slave = &omap3xxx_usb_tll_hs_hwmod,
+ .clk = "usbtll_ick",
+ .addr = omap3xxx_usb_tll_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap3xxx_usb_tll_hs_slaves[] = {
+ &omap3xxx_l4_core__usb_tll_hs,
+};
+
+static struct omap_hwmod omap3xxx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap3xxx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .mpu_irqs = omap3xxx_usb_tll_hs_irqs,
+ .main_clk = "usbtll_fck",
+ .prcm = {
+ .omap2 = {
+ .module_offs = CORE_MOD,
+ .prcm_reg_id = 3,
+ .module_bit = OMAP3430ES2_EN_USBTLL_SHIFT,
+ .idlest_reg_id = 3,
+ .idlest_idle_bit = OMAP3430ES2_ST_USBTLL_SHIFT,
+ },
+ },
+ .slaves = omap3xxx_usb_tll_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap3xxx_usb_tll_hs_slaves),
+};
+
static __initdata struct omap_hwmod *omap3xxx_hwmods[] = {
&omap3xxx_l3_main_hwmod,
&omap3xxx_l4_core_hwmod,
&omap3xxx_l4_per_hwmod,
&omap3xxx_l4_wkup_hwmod,
- &omap3xxx_mmc1_hwmod,
- &omap3xxx_mmc2_hwmod,
&omap3xxx_mmc3_hwmod,
&omap3xxx_mpu_hwmod,
@@ -3198,12 +3517,12 @@
&omap3xxx_timer9_hwmod,
&omap3xxx_timer10_hwmod,
&omap3xxx_timer11_hwmod,
- &omap3xxx_timer12_hwmod,
&omap3xxx_wd_timer2_hwmod,
&omap3xxx_uart1_hwmod,
&omap3xxx_uart2_hwmod,
&omap3xxx_uart3_hwmod,
+
/* dss class */
&omap3xxx_dss_dispc_hwmod,
&omap3xxx_dss_dsi1_hwmod,
@@ -3245,20 +3564,38 @@
NULL,
};
+/* GP-only hwmods */
+static __initdata struct omap_hwmod *omap3xxx_gp_hwmods[] = {
+ &omap3xxx_timer12_hwmod,
+ NULL
+};
+
/* 3430ES1-only hwmods */
static __initdata struct omap_hwmod *omap3430es1_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3430es1_dss_core_hwmod,
- &omap3xxx_mailbox_hwmod,
NULL
};
/* 3430ES2+-only hwmods */
static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = {
- &omap3xxx_iva_hwmod,
&omap3xxx_dss_core_hwmod,
&omap3xxx_usbhsotg_hwmod,
- &omap3xxx_mailbox_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ NULL
+};
+
+/* <= 3430ES3-only hwmods */
+static struct omap_hwmod *omap3430_pre_es3_hwmods[] __initdata = {
+ &omap3xxx_pre_es3_mmc1_hwmod,
+ &omap3xxx_pre_es3_mmc2_hwmod,
+ NULL
+};
+
+/* 3430ES3+-only hwmods */
+static struct omap_hwmod *omap3430_es3plus_hwmods[] __initdata = {
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@@ -3280,12 +3617,21 @@
&omap36xx_sr2_hwmod,
&omap3xxx_usbhsotg_hwmod,
&omap3xxx_mailbox_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
static __initdata struct omap_hwmod *am35xx_hwmods[] = {
&omap3xxx_dss_core_hwmod, /* XXX ??? */
&am35xx_usbhsotg_hwmod,
+ &am35xx_uart4_hwmod,
+ &omap3xxx_usb_host_hs_hwmod,
+ &omap3xxx_usb_tll_hs_hwmod,
+ &omap3xxx_es3plus_mmc1_hwmod,
+ &omap3xxx_es3plus_mmc2_hwmod,
NULL
};
@@ -3300,6 +3646,13 @@
if (r < 0)
return r;
+ /* Register GP-only hwmods. */
+ if (omap_type() == OMAP2_DEVICE_TYPE_GP) {
+ r = omap_hwmod_register(omap3xxx_gp_hwmods);
+ if (r < 0)
+ return r;
+ }
+
rev = omap_rev();
/*
@@ -3338,6 +3691,21 @@
h = omap3430es2plus_hwmods;
};
+ if (h) {
+ r = omap_hwmod_register(h);
+ if (r < 0)
+ return r;
+ }
+
+ h = NULL;
+ if (rev == OMAP3430_REV_ES1_0 || rev == OMAP3430_REV_ES2_0 ||
+ rev == OMAP3430_REV_ES2_1) {
+ h = omap3430_pre_es3_hwmods;
+ } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 ||
+ rev == OMAP3430_REV_ES3_1_2) {
+ h = omap3430_es3plus_hwmods;
+ };
+
if (h)
r = omap_hwmod_register(h);
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index daaf165..f9f1510 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -70,6 +70,8 @@
static struct omap_hwmod omap44xx_mpu_hwmod;
static struct omap_hwmod omap44xx_mpu_private_hwmod;
static struct omap_hwmod omap44xx_usb_otg_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod;
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod;
/*
* Interconnects omap_hwmod structures
@@ -2246,6 +2248,7 @@
SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
SIDLE_SMART_WKUP),
+ .clockact = CLOCKACT_TEST_ICLK,
.sysc_fields = &omap_hwmod_sysc_type1,
};
@@ -2300,7 +2303,7 @@
.name = "i2c1",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c1_irqs,
.sdma_reqs = omap44xx_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
@@ -2356,7 +2359,7 @@
.name = "i2c2",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c2_irqs,
.sdma_reqs = omap44xx_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
@@ -2412,7 +2415,7 @@
.name = "i2c3",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c3_irqs,
.sdma_reqs = omap44xx_i2c3_sdma_reqs,
.main_clk = "i2c3_fck",
@@ -2468,7 +2471,7 @@
.name = "i2c4",
.class = &omap44xx_i2c_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_16BIT_REG,
+ .flags = HWMOD_16BIT_REG | HWMOD_SET_DEFAULT_CLOCKACT,
.mpu_irqs = omap44xx_i2c4_irqs,
.sdma_reqs = omap44xx_i2c4_sdma_reqs,
.main_clk = "i2c4_fck",
@@ -5276,6 +5279,207 @@
.slaves_cnt = ARRAY_SIZE(omap44xx_wd_timer3_slaves),
};
+/*
+ * 'usb_host_hs' class
+ * high-speed multi-port usb host controller
+ */
+static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
+ .master = &omap44xx_usb_host_hs_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "l3_div_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
+ MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
+ .name = "usb_host_hs",
+ .sysc = &omap44xx_usb_host_hs_sysc,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_masters[] = {
+ &omap44xx_usb_host_hs__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_host_hs_addrs[] = {
+ {
+ .name = "uhh",
+ .pa_start = 0x4a064000,
+ .pa_end = 0x4a0647ff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "ohci",
+ .pa_start = 0x4a064800,
+ .pa_end = 0x4a064bff,
+ },
+ {
+ .name = "ehci",
+ .pa_start = 0x4a064c00,
+ .pa_end = 0x4a064fff,
+ },
+ {}
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_host_hs_irqs[] = {
+ { .name = "ohci-irq", .irq = 76 + OMAP44XX_IRQ_GIC_START },
+ { .name = "ehci-irq", .irq = 77 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_host_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_host_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_host_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_host_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
+ .name = "usb_host_hs",
+ .class = &omap44xx_usb_host_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_host_hs_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_host_hs_irqs,
+ .slaves = omap44xx_usb_host_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_slaves),
+ .masters = omap44xx_usb_host_hs_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_usb_host_hs_masters),
+
+ /*
+ * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
+ * id: i660
+ *
+ * Description:
+ * In the following configuration :
+ * - USBHOST module is set to smart-idle mode
+ * - PRCM asserts idle_req to the USBHOST module ( This typically
+ * happens when the system is going to a low power mode : all ports
+ * have been suspended, the master part of the USBHOST module has
+ * entered the standby state, and SW has cut the functional clocks)
+ * - an USBHOST interrupt occurs before the module is able to answer
+ * idle_ack, typically a remote wakeup IRQ.
+ * Then the USB HOST module will enter a deadlock situation where it
+ * is no more accessible nor functional.
+ *
+ * Workaround:
+ * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
+ */
+
+ /*
+ * Errata: USB host EHCI may stall when entering smart-standby mode
+ * Id: i571
+ *
+ * Description:
+ * When the USBHOST module is set to smart-standby mode, and when it is
+ * ready to enter the standby state (i.e. all ports are suspended and
+ * all attached devices are in suspend mode), then it can wrongly assert
+ * the Mstandby signal too early while there are still some residual OCP
+ * transactions ongoing. If this condition occurs, the internal state
+ * machine may go to an undefined state and the USB link may be stuck
+ * upon the next resume.
+ *
+ * Workaround:
+ * Don't use smart standby; use only force standby,
+ * hence HWMOD_SWSUP_MSTANDBY
+ */
+
+ /*
+ * During system boot; If the hwmod framework resets the module
+ * the module will have smart idle settings; which can lead to deadlock
+ * (above Errata Id:i660); so, dont reset the module during boot;
+ * Use HWMOD_INIT_NO_RESET.
+ */
+
+ .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY |
+ HWMOD_INIT_NO_RESET,
+};
+
+/*
+ * 'usb_tll_hs' class
+ * usb_tll_hs module is the adapter on the usb_host_hs ports
+ */
+static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
+ SYSC_HAS_AUTOIDLE),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
+ .name = "usb_tll_hs",
+ .sysc = &omap44xx_usb_tll_hs_sysc,
+};
+
+static struct omap_hwmod_irq_info omap44xx_usb_tll_hs_irqs[] = {
+ { .name = "tll-irq", .irq = 78 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+static struct omap_hwmod_addr_space omap44xx_usb_tll_hs_addrs[] = {
+ {
+ .name = "tll",
+ .pa_start = 0x4a062000,
+ .pa_end = 0x4a063fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {}
+};
+
+static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
+ .master = &omap44xx_l4_cfg_hwmod,
+ .slave = &omap44xx_usb_tll_hs_hwmod,
+ .clk = "l4_div_ck",
+ .addr = omap44xx_usb_tll_hs_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+static struct omap_hwmod_ocp_if *omap44xx_usb_tll_hs_slaves[] = {
+ &omap44xx_l4_cfg__usb_tll_hs,
+};
+
+static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
+ .name = "usb_tll_hs",
+ .class = &omap44xx_usb_tll_hs_hwmod_class,
+ .clkdm_name = "l3_init_clkdm",
+ .main_clk = "usb_tll_hs_ick",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+ .mpu_irqs = omap44xx_usb_tll_hs_irqs,
+ .slaves = omap44xx_usb_tll_hs_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_usb_tll_hs_slaves),
+};
+
static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* dmm class */
@@ -5415,13 +5619,16 @@
&omap44xx_uart3_hwmod,
&omap44xx_uart4_hwmod,
+ /* usb host class */
+ &omap44xx_usb_host_hs_hwmod,
+ &omap44xx_usb_tll_hs_hwmod,
+
/* usb_otg_hs class */
&omap44xx_usb_otg_hs_hwmod,
/* wd_timer class */
&omap44xx_wd_timer2_hwmod,
&omap44xx_wd_timer3_hwmod,
-
NULL,
};
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index 0363dcb..da2d80f 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -201,6 +201,8 @@
#define OMAP3430_EN_MMC2_SHIFT 25
#define OMAP3430_EN_MMC1_MASK (1 << 24)
#define OMAP3430_EN_MMC1_SHIFT 24
+#define OMAP3430_EN_UART4_MASK (1 << 23)
+#define OMAP3430_EN_UART4_SHIFT 23
#define OMAP3430_EN_MCSPI4_MASK (1 << 21)
#define OMAP3430_EN_MCSPI4_SHIFT 21
#define OMAP3430_EN_MCSPI3_MASK (1 << 20)
diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
index 89ae298..771dc78 100644
--- a/arch/arm/mach-omap2/usb-host.c
+++ b/arch/arm/mach-omap2/usb-host.c
@@ -28,51 +28,28 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <plat/usb.h>
+#include <plat/omap_device.h>
#include "mux.h"
#ifdef CONFIG_MFD_OMAP_USB_HOST
-#define OMAP_USBHS_DEVICE "usbhs-omap"
-
-static struct resource usbhs_resources[] = {
- {
- .name = "uhh",
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "tll",
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "ehci",
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "ehci-irq",
- .flags = IORESOURCE_IRQ,
- },
- {
- .name = "ohci",
- .flags = IORESOURCE_MEM,
- },
- {
- .name = "ohci-irq",
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device usbhs_device = {
- .name = OMAP_USBHS_DEVICE,
- .id = 0,
- .num_resources = ARRAY_SIZE(usbhs_resources),
- .resource = usbhs_resources,
-};
+#define OMAP_USBHS_DEVICE "usbhs_omap"
+#define USBHS_UHH_HWMODNAME "usb_host_hs"
+#define USBHS_TLL_HWMODNAME "usb_tll_hs"
static struct usbhs_omap_platform_data usbhs_data;
static struct ehci_hcd_omap_platform_data ehci_data;
static struct ohci_hcd_omap_platform_data ohci_data;
+static struct omap_device_pm_latency omap_uhhtll_latency[] = {
+ {
+ .deactivate_func = omap_device_idle_hwmods,
+ .activate_func = omap_device_enable_hwmods,
+ .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
+ },
+};
+
/* MUX settings for EHCI pins */
/*
* setup_ehci_io_mux - initialize IO pad mux for USBHOST
@@ -508,7 +485,10 @@
void __init usbhs_init(const struct usbhs_omap_board_data *pdata)
{
- int i;
+ struct omap_hwmod *oh[2];
+ struct omap_device *od;
+ int bus_id = -1;
+ int i;
for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
usbhs_data.port_mode[i] = pdata->port_mode[i];
@@ -523,44 +503,34 @@
usbhs_data.ohci_data = &ohci_data;
if (cpu_is_omap34xx()) {
- usbhs_resources[0].start = OMAP34XX_UHH_CONFIG_BASE;
- usbhs_resources[0].end = OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1;
- usbhs_resources[1].start = OMAP34XX_USBTLL_BASE;
- usbhs_resources[1].end = OMAP34XX_USBTLL_BASE + SZ_4K - 1;
- usbhs_resources[2].start = OMAP34XX_EHCI_BASE;
- usbhs_resources[2].end = OMAP34XX_EHCI_BASE + SZ_1K - 1;
- usbhs_resources[3].start = INT_34XX_EHCI_IRQ;
- usbhs_resources[4].start = OMAP34XX_OHCI_BASE;
- usbhs_resources[4].end = OMAP34XX_OHCI_BASE + SZ_1K - 1;
- usbhs_resources[5].start = INT_34XX_OHCI_IRQ;
setup_ehci_io_mux(pdata->port_mode);
setup_ohci_io_mux(pdata->port_mode);
} else if (cpu_is_omap44xx()) {
- usbhs_resources[0].start = OMAP44XX_UHH_CONFIG_BASE;
- usbhs_resources[0].end = OMAP44XX_UHH_CONFIG_BASE + SZ_1K - 1;
- usbhs_resources[1].start = OMAP44XX_USBTLL_BASE;
- usbhs_resources[1].end = OMAP44XX_USBTLL_BASE + SZ_4K - 1;
- usbhs_resources[2].start = OMAP44XX_HSUSB_EHCI_BASE;
- usbhs_resources[2].end = OMAP44XX_HSUSB_EHCI_BASE + SZ_1K - 1;
- usbhs_resources[3].start = OMAP44XX_IRQ_EHCI;
- usbhs_resources[4].start = OMAP44XX_HSUSB_OHCI_BASE;
- usbhs_resources[4].end = OMAP44XX_HSUSB_OHCI_BASE + SZ_1K - 1;
- usbhs_resources[5].start = OMAP44XX_IRQ_OHCI;
setup_4430ehci_io_mux(pdata->port_mode);
setup_4430ohci_io_mux(pdata->port_mode);
}
- if (platform_device_add_data(&usbhs_device,
- &usbhs_data, sizeof(usbhs_data)) < 0) {
- printk(KERN_ERR "USBHS platform_device_add_data failed\n");
- goto init_end;
+ oh[0] = omap_hwmod_lookup(USBHS_UHH_HWMODNAME);
+ if (!oh[0]) {
+ pr_err("Could not look up %s\n", USBHS_UHH_HWMODNAME);
+ return;
}
- if (platform_device_register(&usbhs_device) < 0)
- printk(KERN_ERR "USBHS platform_device_register failed\n");
+ oh[1] = omap_hwmod_lookup(USBHS_TLL_HWMODNAME);
+ if (!oh[1]) {
+ pr_err("Could not look up %s\n", USBHS_TLL_HWMODNAME);
+ return;
+ }
-init_end:
- return;
+ od = omap_device_build_ss(OMAP_USBHS_DEVICE, bus_id, oh, 2,
+ (void *)&usbhs_data, sizeof(usbhs_data),
+ omap_uhhtll_latency,
+ ARRAY_SIZE(omap_uhhtll_latency), false);
+ if (IS_ERR(od)) {
+ pr_err("Could not build hwmod devices %s,%s\n",
+ USBHS_UHH_HWMODNAME, USBHS_TLL_HWMODNAME);
+ return;
+ }
}
#else
@@ -570,5 +540,3 @@
}
#endif
-
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 4cb069f..ccdac4b 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -138,7 +138,7 @@
{
int i;
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
for (i = 0; i < ARRAY_SIZE(gpios); i++)
gpio_free(gpios[i]);
@@ -292,7 +292,7 @@
{
int ret;
- ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
IRQF_DISABLED|IRQF_TRIGGER_FALLING,
"AM200", info->par);
if (ret)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index fa8bad2..76c4b94 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -176,7 +176,7 @@
{
int i;
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
for (i = 0; i < ARRAY_SIZE(gpios); i++)
gpio_free(gpios[i]);
@@ -240,7 +240,7 @@
int ret;
struct broadsheetfb_par *par = info->par;
- ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
IRQF_DISABLED|IRQF_TRIGGER_RISING,
"AM300", par);
if (ret)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index 4b81f59..11f2223 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -179,7 +179,7 @@
};
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
- .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
};
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..5516317 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -50,8 +50,8 @@
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO76)),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING
}
};
@@ -80,7 +80,7 @@
static struct plat_serial8250_port ti16c752_platform_data[] = {
[0] = {
.mapbase = 0x14000000,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO78)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO78)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -89,7 +89,7 @@
},
[1] = {
.mapbase = 0x14000040,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO79)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO79)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -98,7 +98,7 @@
},
[2] = {
.mapbase = 0x14000080,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO80)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO80)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
@@ -107,7 +107,7 @@
},
[3] = {
.mapbase = 0x140000c0,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO81)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO81)),
.irqflags = IRQF_TRIGGER_RISING,
.flags = TI16C752_FLAGS,
.iotype = UPIO_MEM,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a7..431ef56 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -33,7 +33,7 @@
/* GPIO IRQ usage */
#define GPIO83_MMC_IRQ (83)
-#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
@@ -380,7 +380,7 @@
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
- .irq = gpio_to_irq(95),
+ .irq = PXA_GPIO_TO_IRQ(95),
.chip_select = 0,
.controller_data = &cm_x270_libertas_chip,
.platform_data = &cm_x270_libertas_pdata,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..9344a0e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -58,8 +58,8 @@
#define CMX255_GPIO_IT8152_IRQ (0)
#define CMX270_GPIO_IT8152_IRQ (22)
-#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource cmx255_dm9000_resource[] = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index e096bba..684acf6 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -64,7 +64,7 @@
#define GPIO82_MMC_IRQ (82)
#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
+#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -229,8 +229,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
- .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 05bfa1b..f0fe9a5 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -218,8 +218,8 @@
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
- .end = gpio_to_irq(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_COLIBRI_PXA270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -249,7 +249,7 @@
};
static struct ucb1400_pdata colibri_pxa270_ucb1400_pdata = {
- .irq = gpio_to_irq(GPIO113_COLIBRI_PXA270_TS_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_COLIBRI_PXA270_TS_IRQ),
};
static struct platform_device colibri_pxa270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..0a6222e 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -78,8 +78,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d23b92b..56ab7a6 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -115,8 +115,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
- .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO),
+ .start = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
+ .end = PXA_GPIO_TO_IRQ(COLIBRI_ETH_IRQ_GPIO),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 549468d..3812ba0 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@
.chip_select = 0,
.platform_data = &corgi_ads7846_info,
.controller_data= &corgi_ads7846_chip,
- .irq = gpio_to_irq(CORGI_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(CORGI_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 2903477..39e265c 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
@@ -40,7 +41,9 @@
{ CORGI_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
{ CORGI_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
{ CORGI_GPIO_CHRG_UKN, GPIOF_OUT_INIT_LOW, "Charger Unknown" },
+ { CORGI_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
{ CORGI_GPIO_KEY_INT, GPIOF_IN, "Key Interrupt" },
+ { CORGI_GPIO_WAKEUP, GPIOF_IN, "System wakeup notification" },
};
static void corgi_charger_init(void)
@@ -90,7 +93,12 @@
{
int is_resume = 0;
- dev_dbg(sharpsl_pm.dev, "GPLR0 = %x,%x\n", GPLR0, PEDR);
+ dev_dbg(sharpsl_pm.dev, "PEDR = %x, GPIO_AC_IN = %d, "
+ "GPIO_CHRG_FULL = %d, GPIO_KEY_INT = %d, GPIO_WAKEUP = %d\n",
+ PEDR, gpio_get_value(CORGI_GPIO_AC_IN),
+ gpio_get_value(CORGI_GPIO_CHRG_FULL),
+ gpio_get_value(CORGI_GPIO_KEY_INT),
+ gpio_get_value(CORGI_GPIO_WAKEUP));
if ((PEDR & GPIO_bit(CORGI_GPIO_AC_IN))) {
if (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
@@ -124,14 +132,21 @@
static unsigned long corgi_charger_wakeup(void)
{
- return ~GPLR0 & ( GPIO_bit(CORGI_GPIO_AC_IN) | GPIO_bit(CORGI_GPIO_KEY_INT) | GPIO_bit(CORGI_GPIO_WAKEUP) );
+ unsigned long ret;
+
+ ret = (!gpio_get_value(CORGI_GPIO_AC_IN) << GPIO_bit(CORGI_GPIO_AC_IN))
+ | (!gpio_get_value(CORGI_GPIO_KEY_INT)
+ << GPIO_bit(CORGI_GPIO_KEY_INT))
+ | (!gpio_get_value(CORGI_GPIO_WAKEUP)
+ << GPIO_bit(CORGI_GPIO_WAKEUP));
+ return ret;
}
unsigned long corgipm_read_devdata(int type)
{
switch(type) {
case SHARPSL_STATUS_ACIN:
- return ((GPLR(CORGI_GPIO_AC_IN) & GPIO_bit(CORGI_GPIO_AC_IN)) != 0);
+ return !gpio_get_value(CORGI_GPIO_AC_IN);
case SHARPSL_STATUS_LOCK:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 8b134c3..18fd177 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -1071,6 +1071,36 @@
};
#endif /* CONFIG_PXA3xx || CONFIG_PXA95x */
+struct resource pxa_resource_gpio[] = {
+ {
+ .start = 0x40e00000,
+ .end = 0x40e0ffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IRQ_GPIO0,
+ .end = IRQ_GPIO0,
+ .name = "gpio0",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO1,
+ .end = IRQ_GPIO1,
+ .name = "gpio1",
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_GPIO_2_x,
+ .end = IRQ_GPIO_2_x,
+ .name = "gpio_mux",
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device pxa_device_gpio = {
+ .name = "pxa-gpio",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(pxa_resource_gpio),
+ .resource = pxa_resource_gpio,
+};
+
/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
* See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index 2fd5a8b..1475db1 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -16,6 +16,7 @@
extern struct platform_device sa1100_device_rtc;
extern struct platform_device pxa_device_rtc;
extern struct platform_device pxa_device_ac97;
+extern struct platform_device pxa_device_gpio;
extern struct platform_device pxa27x_device_i2c_power;
extern struct platform_device pxa27x_device_ohci;
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..3358f4d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -70,7 +70,7 @@
/* common GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO41_ETHIRQ (41)
-#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
#define GPIO9_USB_VBUS_EN (9)
@@ -805,7 +805,7 @@
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
- .irq = IRQ_GPIO(116),
+ .irq = PXA_GPIO_TO_IRQ(116),
.chip_select = 0,
.controller_data = &em_x270_libertas_chip,
.platform_data = &em_x270_libertas_pdata,
@@ -1203,7 +1203,7 @@
static struct i2c_board_info em_x270_i2c_pmic_info = {
I2C_BOARD_INFO("da9030", 0x49),
- .irq = IRQ_GPIO(0),
+ .irq = PXA_GPIO_TO_IRQ(0),
.platform_data = &em_x270_da9030_info,
};
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa..e556a1e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -119,8 +119,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
- .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..82e9976 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -252,8 +252,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
- .end = gpio_to_irq(GPIO12_HX4700_ASIC3_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO12_HX4700_ASIC3_IRQ),
.flags = IORESOURCE_IRQ,
},
/* SD part */
@@ -263,8 +263,8 @@
.flags = IORESOURCE_MEM,
},
[3] = {
- .start = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
- .end = gpio_to_irq(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO66_HX4700_ASIC3_nSDIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -587,7 +587,7 @@
.modalias = "ads7846",
.bus_num = 2,
.max_speed_hz = 2600000, /* 100 kHz sample rate */
- .irq = gpio_to_irq(GPIO58_HX4700_TSC2046_nPENIRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO58_HX4700_TSC2046_nPENIRQ),
.platform_data = &tsc2046_info,
.controller_data = &tsc2046_chip,
},
@@ -635,15 +635,15 @@
.name = "ac",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD9_nAC_IN),
- .end = gpio_to_irq(GPIOD9_nAC_IN),
+ .start = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
+ .end = PXA_GPIO_TO_IRQ(GPIOD9_nAC_IN),
},
[1] = {
.name = "usb",
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
- .start = gpio_to_irq(GPIOD14_nUSBC_DETECT),
- .end = gpio_to_irq(GPIOD14_nUSBC_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIOD14_nUSBC_DETECT),
},
};
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..33e81e8 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -86,7 +86,7 @@
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info1,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ1)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ1)
},
{
.modalias = "mcp2515",
@@ -95,7 +95,7 @@
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info2,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ2)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ2)
},
{
.modalias = "mcp2515",
@@ -104,7 +104,7 @@
.chip_select = 0,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info3,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ3)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ3)
},
{
.modalias = "mcp2515",
@@ -113,7 +113,7 @@
.chip_select = 1,
.platform_data = &mcp251x_info,
.controller_data = &mcp251x_chip_info4,
- .irq = gpio_to_irq(ICONTROL_MCP251x_nIRQ4)
+ .irq = PXA_GPIO_TO_IRQ(ICONTROL_MCP251x_nIRQ4)
}
};
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..bb98ff5 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -75,8 +75,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(4),
- .end = IRQ_GPIO(4),
+ .start = PXA_GPIO_TO_IRQ(4),
+ .end = PXA_GPIO_TO_IRQ(4),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 6d7eab3..f02fa1e 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -172,9 +172,9 @@
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
-#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD)
#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 5dfd119..f3c3493 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -66,18 +66,18 @@
/*
* Corgi Interrupts
*/
-#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0)
-#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3)
-#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4)
-#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11)
-#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */
+#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0)
+#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3)
+#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4)
+#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11)
+#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */
/*
@@ -98,7 +98,7 @@
CORGI_SCP_MIC_BIAS )
#define CORGI_SCOOP_IO_OUT ( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
-#define CORGI_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define CORGI_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define CORGI_GPIO_LED_GREEN (CORGI_SCOOP_GPIO_BASE + 0)
#define CORGI_GPIO_SWA (CORGI_SCOOP_GPIO_BASE + 1) /* Hinge Switch A */
#define CORGI_GPIO_SWB (CORGI_SCOOP_GPIO_BASE + 2) /* Hinge Switch B */
diff --git a/arch/arm/mach-pxa/include/mach/csb726.h b/arch/arm/mach-pxa/include/mach/csb726.h
index 747ab1a..2628e7b 100644
--- a/arch/arm/mach-pxa/include/mach/csb726.h
+++ b/arch/arm/mach-pxa/include/mach/csb726.h
@@ -19,8 +19,8 @@
#define CSB726_FLASH_SIZE (64 * 1024 * 1024)
#define CSB726_FLASH_uMON (8 * 1024 * 1024)
-#define CSB726_IRQ_LAN gpio_to_irq(CSB726_GPIO_IRQ_LAN)
-#define CSB726_IRQ_SM501 gpio_to_irq(CSB726_GPIO_IRQ_SM501)
+#define CSB726_IRQ_LAN PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_LAN)
+#define CSB726_IRQ_SM501 PXA_GPIO_TO_IRQ(CSB726_GPIO_IRQ_SM501)
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
deleted file mode 100644
index 41b4c93..0000000
--- a/arch/arm/mach-pxa/include/mach/gpio-pxa.h
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Written by Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#ifndef __MACH_PXA_GPIO_PXA_H
-#define __MACH_PXA_GPIO_PXA_H
-
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-
-#define GPIO_REGS_VIRT io_p2v(0x40E00000)
-
-#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0 GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1 GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2 GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3 GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0 GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1 GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2 GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3 GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0 GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1 GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2 GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3 GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0 GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1 GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2 GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3 GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0 GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1 GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2 GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3 GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0 GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1 GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2 GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3 GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0 GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1 GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2 GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3 GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L GPIO_REG(0x0054)
-#define GAFR0_U GPIO_REG(0x0058)
-#define GAFR1_L GPIO_REG(0x005C)
-#define GAFR1_U GPIO_REG(0x0060)
-#define GAFR2_L GPIO_REG(0x0064)
-#define GAFR2_U GPIO_REG(0x0068)
-#define GAFR3_L GPIO_REG(0x006C)
-#define GAFR3_U GPIO_REG(0x0070)
-
-/* More handy macros. The argument is a literal GPIO number. */
-
-#define GPIO_bit(x) (1 << ((x) & 0x1f))
-
-#define GPLR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x) GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x) GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio) ((gpio) >> 5)
-
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
- return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
- if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
- int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
- int dir = GPDR(gpio) & GPIO_bit(gpio);
-
- if (__gpio_is_inverted(gpio))
- return af != 1 || dir == 0;
- else
- return af != 0 || dir != 0;
- } else
- return GPDR(gpio) & GPIO_bit(gpio);
-}
-
-#include <plat/gpio-pxa.h>
-#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 004cade..0248e43 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -25,24 +25,8 @@
#define __ASM_ARCH_PXA_GPIO_H
#include <asm-generic/gpio.h>
-/* The defines for the driver are needed for the accelerated accessors */
-#include "gpio-pxa.h"
-#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
+#include <mach/irqs.h>
+#include <mach/hardware.h>
-static inline int irq_to_gpio(unsigned int irq)
-{
- int gpio;
-
- if (irq == IRQ_GPIO0 || irq == IRQ_GPIO1)
- return irq - IRQ_GPIO0;
-
- gpio = irq - PXA_GPIO_IRQ_BASE;
- if (gpio >= 2 && gpio < NR_BUILTIN_GPIO)
- return gpio;
-
- return -1;
-}
-
-#include <plat/gpio.h>
#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 9b89868..dba14b6 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -24,7 +24,7 @@
#define GPIO_GUMSTIX_USB_GPIOx 41
/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
@@ -35,7 +35,7 @@
*/
#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */
#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
/*
* SMC Ethernet definitions
@@ -49,10 +49,10 @@
#define GPIO_GUMSTIX_ETH0 36
#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
#define GPIO_GUMSTIX_ETH1 27
#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
/* CF reset line */
@@ -63,18 +63,18 @@
#define GPIO4_nSTSCHG GPIO4_nBVD1
#define GPIO11_nCD 11
#define GPIO26_PRDY_nBSY 26
-#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY)
+#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
/* CF slot 1 */
#define GPIO18_nBVD1 18
#define GPIO18_nSTSCHG GPIO18_nBVD1
#define GPIO36_nCD 36
#define GPIO27_PRDY_nBSY 27
-#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY)
+#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
/* CF GPIO line modes */
#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hx4700.h b/arch/arm/mach-pxa/include/mach/hx4700.h
index 3740844..8bc0291 100644
--- a/arch/arm/mach-pxa/include/mach/hx4700.h
+++ b/arch/arm/mach-pxa/include/mach/hx4700.h
@@ -15,7 +15,7 @@
#include <linux/gpio.h>
#include <linux/mfd/asic3.h>
-#define HX4700_ASIC3_GPIO_BASE NR_BUILTIN_GPIO
+#define HX4700_ASIC3_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define HX4700_EGPIO_BASE (HX4700_ASIC3_GPIO_BASE + ASIC3_NUM_GPIOS)
#define HX4700_NR_IRQS (IRQ_BOARD_START + 70)
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 5eff96f..22a96f8 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -131,28 +131,26 @@
#define PCC_VS2 (1 << 1)
#define PCC_VS1 (1 << 0)
-#define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x)))
-
/* A listing of interrupts used by external hardware devices */
-#define TOUCH_PANEL_IRQ IRQ_GPIO(5)
-#define IDE_IRQ IRQ_GPIO(21)
+#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
+#define IDE_IRQ PXA_GPIO_TO_IRQ(21)
#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-#define ETHERNET_IRQ IRQ_GPIO(4)
+#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4)
#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7)
#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S1_CD_VALID IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8)
#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S0_RDYINT IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT IRQ_GPIO(22)
+#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19)
+#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22)
/*
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7cc5a78..32975ad 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -88,10 +88,8 @@
#define IRQ_U2P PXA_IRQ(93) /* USB PHY D+/D- Lines (PXA935) */
#define PXA_GPIO_IRQ_BASE PXA_IRQ(96)
-#define PXA_GPIO_IRQ_NUM (192)
-
-#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+#define PXA_NR_BUILTIN_GPIO (192)
+#define PXA_GPIO_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
/*
* The following interrupts are for board specific purposes. Since
@@ -100,7 +98,7 @@
* By default, no board IRQ is reserved. It should be finished in
* custom board since sparse IRQ is already enabled.
*/
-#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_START (PXA_GPIO_IRQ_BASE + PXA_NR_BUILTIN_GPIO)
#define NR_IRQS (IRQ_BOARD_START)
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index b6238cb..8066be54 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,13 +1,11 @@
#ifndef __ASM_ARCH_LITTLETON_H
#define __ASM_ARCH_LITTLETON_H
-#include <mach/gpio-pxa.h>
-
#define LITTLETON_ETH_PHYS 0x30000000
#define LITTLETON_GPIO_LCD_CS (17)
-#define EXT0_GPIO_BASE (NR_BUILTIN_GPIO)
+#define EXT0_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define EXT0_GPIO(x) (EXT0_GPIO_BASE + (x))
#define LITTLETON_NR_IRQS (IRQ_BOARD_START + 8)
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
index 7cbfc5d..ba6a6e1 100644
--- a/arch/arm/mach-pxa/include/mach/magician.h
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -78,7 +78,7 @@
* CPLD EGPIOs
*/
-#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO
+#define MAGICIAN_EGPIO_BASE PXA_NR_BUILTIN_GPIO
#define MAGICIAN_EGPIO(reg,bit) \
(MAGICIAN_EGPIO_BASE + 8*reg + bit)
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index ae536e8..2c447133 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -68,10 +68,10 @@
/* 20, 53 and 86 are usb related too */
/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 6baf746..0bd4f03 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -48,10 +48,10 @@
#define GPIO_NR_PALMT5_BT_RESET 83
/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3f9dd3f..c383a21 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -52,8 +52,8 @@
#define GPIO_NR_PALMTC_IR_DISABLE 45
/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
/* UCB1400 GPIOs */
#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 7074a6e..f2e5303 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -62,10 +62,10 @@
#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79
/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4bac588..6bf28de 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -34,7 +34,7 @@
/* I2C RTC */
#define PCM027_RTC_IRQ_GPIO 0
-#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define ADR_PCM027_RTC 0x51 /* I2C address */
@@ -43,21 +43,21 @@
/* Ethernet chip (SMSC91C111) */
#define PCM027_ETH_IRQ_GPIO 52
-#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM027_ETH_PHYS PXA_CS5_PHYS
#define PCM027_ETH_SIZE (1*1024*1024)
/* CAN controller SJA1000 (unsupported yet) */
#define PCM027_CAN_IRQ_GPIO 114
-#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define PCM027_CAN_PHYS 0x22000000
#define PCM027_CAN_SIZE 0x100
/* SPI GPIO expander (unsupported yet) */
#define PCM027_EGPIO_IRQ_GPIO 27
-#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define PCM027_EGPIO_CS 24
/*
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 8a4383b..d727916 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -28,14 +28,14 @@
/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
#define PCM990_CTRL_INT_IRQ_GPIO 9
-#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
#define PCM990_CTRL_BASE 0xea000000
#define PCM990_CTRL_SIZE (1*1024*1024)
#define PCM990_CTRL_PWR_IRQ_GPIO 14
-#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/* visible CPLD (U7) registers */
@@ -132,7 +132,7 @@
* IDE
*/
#define PCM990_IDE_IRQ_GPIO 13
-#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
#define PCM990_IDE_PLD_BASE 0xee000000
@@ -188,11 +188,11 @@
* Compact Flash
*/
#define PCM990_CF_IRQ_GPIO 11
-#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_CD_GPIO 12
-#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
@@ -258,14 +258,14 @@
* Wolfson AC97 Touch
*/
#define PCM990_AC97_IRQ_GPIO 10
-#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/*
* MMC phyCORE
*/
#define PCM990_MMC0_IRQ_GPIO 9
-#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
/*
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 83d1cfd..f32ff75 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -47,18 +47,18 @@
#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13)
+#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0)
+#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4)
+#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16)
+#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11)
+#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10)
+#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13)
/* SCOOP GPIOs */
#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
@@ -71,7 +71,7 @@
#define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
#define POODLE_SCOOP_IO_OUT ( 0 )
-#define POODLE_SCOOP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define POODLE_SCOOP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define POODLE_GPIO_CHARGE_ON (POODLE_SCOOP_GPIO_BASE + 0)
#define POODLE_GPIO_CP401 (POODLE_SCOOP_GPIO_BASE + 2)
#define POODLE_GPIO_VPEN (POODLE_SCOOP_GPIO_BASE + 7)
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 685749a..0bfe650 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -108,7 +108,7 @@
#define SPITZ_SCP_SUS_CLR (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
#define SPITZ_SCP_SUS_SET 0
-#define SPITZ_SCP_GPIO_BASE (NR_BUILTIN_GPIO)
+#define SPITZ_SCP_GPIO_BASE (PXA_NR_BUILTIN_GPIO)
#define SPITZ_GPIO_LED_GREEN (SPITZ_SCP_GPIO_BASE + 0)
#define SPITZ_GPIO_JK_B (SPITZ_SCP_GPIO_BASE + 1)
#define SPITZ_GPIO_CHRG_ON (SPITZ_SCP_GPIO_BASE + 2)
@@ -140,7 +140,7 @@
SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
#define SPITZ_SCP2_SUS_SET (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
-#define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define SPITZ_SCP2_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0)
#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1)
#define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2)
@@ -152,7 +152,7 @@
#define SPITZ_GPIO_MIC_BIAS (SPITZ_SCP2_GPIO_BASE + 8)
/* Akita IO Expander GPIOs */
-#define AKITA_IOEXP_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define AKITA_IOEXP_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define AKITA_GPIO_RESERVED_0 (AKITA_IOEXP_GPIO_BASE + 0)
#define AKITA_GPIO_RESERVED_1 (AKITA_IOEXP_GPIO_BASE + 1)
#define AKITA_GPIO_MIC_BIAS (AKITA_IOEXP_GPIO_BASE + 2)
@@ -164,23 +164,23 @@
/* Spitz IRQ Definitions */
-#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
/*
* Shared data structures
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1272c4b..2bb0e86 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -24,7 +24,7 @@
/*
* SCOOP2 internal GPIOs
*/
-#define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO
+#define TOSA_SCOOP_GPIO_BASE PXA_NR_BUILTIN_GPIO
#define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11
#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1)
#define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2)
@@ -42,7 +42,7 @@
/*
* SCOOP2 jacket GPIOs
*/
-#define TOSA_SCOOP_JC_GPIO_BASE (NR_BUILTIN_GPIO + 12)
+#define TOSA_SCOOP_JC_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 12)
#define TOSA_GPIO_BT_LED (TOSA_SCOOP_JC_GPIO_BASE + 0)
#define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1)
#define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2)
@@ -59,7 +59,7 @@
/*
* TC6393XB GPIOs
*/
-#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO_BASE (PXA_NR_BUILTIN_GPIO + 2 * 12)
#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0)
#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1)
@@ -141,30 +141,30 @@
/*
* Interrupts
*/
-#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a))
+#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a))
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
#define TOSA_KEY_SYNC KEY_102ND /* ??? */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 903e1a2..d2ca010 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -43,30 +43,30 @@
/* Ethernet Controller Davicom DM9000 */
#define GPIO_DM9000 101
-#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000)
/* UCB1400 audio / TS-controller */
#define GPIO_UCB1400 1
-#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400)
+#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400)
/* PCMCIA socket Compact Flash */
#define GPIO_PCD 11 /* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD)
+#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD)
#define GPIO_PRDY 13 /* READY / nINT */
-#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY)
+#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY)
/* MMC socket */
#define GPIO_MMC_DET 12
-#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET)
+#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
/* DOC NAND chip */
#define GPIO_DOC_LOCK 94
#define GPIO_DOC_IRQ 93
-#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ)
+#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
/* SPI interface */
#define GPIO_SPI 53
-#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI)
+#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI)
/* LEDS using tx2 / rx2 */
#define GPIO_SYS_BUSY_LED 46
@@ -74,7 +74,7 @@
/* Off-module PIC on ConXS board */
#define GPIO_PIC 0
-#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC)
+#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC)
#ifdef CONFIG_MACH_TRIZEPS_CONXS
/* for CONXS base board define these registers */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 532c5d3..5dae15e 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -22,7 +22,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/gpio-pxa.h>
#include "generic.h"
@@ -92,44 +91,6 @@
.irq_unmask = pxa_unmask_irq,
};
-/*
- * GPIO IRQs for GPIO 0 and 1
- */
-static int pxa_set_low_gpio_type(struct irq_data *d, unsigned int type)
-{
- int gpio = d->irq - IRQ_GPIO0;
-
- if (__gpio_is_occupied(gpio)) {
- pr_err("%s failed: GPIO is configured\n", __func__);
- return -EINVAL;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING)
- GRER0 |= GPIO_bit(gpio);
- else
- GRER0 &= ~GPIO_bit(gpio);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- GFER0 |= GPIO_bit(gpio);
- else
- GFER0 &= ~GPIO_bit(gpio);
-
- return 0;
-}
-
-static void pxa_ack_low_gpio(struct irq_data *d)
-{
- GEDR0 = (1 << (d->irq - IRQ_GPIO0));
-}
-
-static struct irq_chip pxa_low_gpio_chip = {
- .name = "GPIO-l",
- .irq_ack = pxa_ack_low_gpio,
- .irq_mask = pxa_mask_irq,
- .irq_unmask = pxa_unmask_irq,
- .irq_set_type = pxa_set_low_gpio_type,
-};
-
asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs)
{
uint32_t icip, icmr, mask;
@@ -160,26 +121,7 @@
} while (1);
}
-static void __init pxa_init_low_gpio_irq(set_wake_t fn)
-{
- int irq;
-
- /* clear edge detection on GPIO 0 and 1 */
- GFER0 &= ~0x3;
- GRER0 &= ~0x3;
- GEDR0 = 0x3;
-
- for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
- irq_set_chip_and_handler(irq, &pxa_low_gpio_chip,
- handle_edge_irq);
- irq_set_chip_data(irq, irq_base(0));
- set_irq_flags(irq, IRQF_VALID);
- }
-
- pxa_low_gpio_chip.irq_set_wake = fn;
-}
-
-void __init pxa_init_irq(int irq_nr, set_wake_t fn)
+void __init pxa_init_irq(int irq_nr, int (*fn)(struct irq_data *, unsigned int))
{
int irq, i, n;
@@ -209,7 +151,6 @@
__raw_writel(1, irq_base(0) + ICCR);
pxa_internal_irq_chip.irq_set_wake = fn;
- pxa_init_low_gpio_irq(fn);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 7b324ec..d21e28b4 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -124,8 +124,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
- .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
@@ -396,7 +396,7 @@
.type = "da9034",
.addr = 0x34,
.platform_data = &littleton_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO18)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO18)),
},
[1] = {
.type = "max7320",
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..565dd2f 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -152,8 +152,8 @@
handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..2fb2b50 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -170,8 +170,8 @@
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..e340ea0 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -184,8 +184,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
- .end = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_MAGICIAN_CPLD_IRQ),
.flags = IORESOURCE_IRQ,
},
};
@@ -468,8 +468,8 @@
},
/* No IRQ handler in the PASIC3, DS1WM needs an external IRQ */
[1] = {
- .start = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
- .end = gpio_to_irq(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO107_MAGICIAN_DS1WM_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ea62a99 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -178,8 +178,8 @@
MST_INTMSKENA = 0;
MST_INTSETCLR = 0;
- irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 43a5f68..f147755 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -13,6 +13,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -20,7 +21,6 @@
#include <mach/pxa2xx-regs.h>
#include <mach/mfp-pxa2xx.h>
-#include <mach/gpio-pxa.h>
#include "generic.h"
@@ -29,6 +29,10 @@
#define GAFR_L(x) __GAFR(0, x)
#define GAFR_U(x) __GAFR(1, x)
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPLR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5))
+#define GPDR(x) __REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+
#define PWER_WE35 (1 << 24)
struct gpio_desc {
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index b938fc2..23f90c7 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -541,15 +541,15 @@
static struct resource power_resources[] = {
[0] = {
.name = "ac",
- .start = gpio_to_irq(GPIO96_AC_DETECT),
- .end = gpio_to_irq(GPIO96_AC_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO96_AC_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
[1] = {
.name = "usb",
- .start = gpio_to_irq(GPIO13_nUSB_DETECT),
- .end = gpio_to_irq(GPIO13_nUSB_DETECT),
+ .start = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
+ .end = PXA_GPIO_TO_IRQ(GPIO13_nUSB_DETECT),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
},
diff --git a/arch/arm/mach-pxa/mxm8x10.c b/arch/arm/mach-pxa/mxm8x10.c
index 90928d6..83570a7 100644
--- a/arch/arm/mach-pxa/mxm8x10.c
+++ b/arch/arm/mach-pxa/mxm8x10.c
@@ -417,8 +417,8 @@
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO9)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE
}
};
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d38c65..abab4e2 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -378,7 +378,7 @@
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
- .gpio_base = NR_BUILTIN_GPIO,
+ .gpio_base = PXA_NR_BUILTIN_GPIO,
};
static int gpio_bus_switch = -EINVAL;
@@ -406,9 +406,9 @@
int ret;
if (gpio_bus_switch < 0) {
- ret = gpio_request(NR_BUILTIN_GPIO, "camera");
+ ret = gpio_request(PXA_NR_BUILTIN_GPIO, "camera");
if (!ret) {
- gpio_bus_switch = NR_BUILTIN_GPIO;
+ gpio_bus_switch = PXA_NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
}
}
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c8331..8ee4b6c 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -166,8 +166,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(10),
- .end = IRQ_GPIO(10),
+ .start = PXA_GPIO_TO_IRQ(10),
+ .end = PXA_GPIO_TO_IRQ(10),
.flags = IORESOURCE_IRQ,
},
};
@@ -212,7 +212,7 @@
.bus_num = 1,
.platform_data = &poodle_ads7846_info,
.controller_data= &poodle_ads7846_chip,
- .irq = gpio_to_irq(POODLE_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(POODLE_GPIO_TP_INT),
},
};
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 37b1d51..adf058f 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -17,6 +17,7 @@
* need be.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -289,7 +290,7 @@
static int pxa25x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask = 0;
if (gpio >= 0 && gpio < 85)
@@ -314,14 +315,12 @@
void __init pxa25x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 84, pxa25x_set_wake);
}
#ifdef CONFIG_CPU_PXA26x
void __init pxa26x_init_irq(void)
{
pxa_init_irq(32, pxa25x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 89, pxa25x_set_wake);
}
#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index e47fbe2..180bd86 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -12,6 +12,7 @@
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -357,7 +358,7 @@
*/
static int pxa27x_set_wake(struct irq_data *d, unsigned int on)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
uint32_t mask;
if (gpio >= 0 && gpio < 128)
@@ -388,7 +389,6 @@
void __init pxa27x_init_irq(void)
{
pxa_init_irq(34, pxa27x_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 120, pxa27x_set_wake);
}
static struct map_desc pxa27x_io_desc[] __initdata = {
@@ -424,6 +424,7 @@
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 89675e3..f107c71 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -25,7 +25,6 @@
#include <asm/mach/map.h>
#include <asm/suspend.h>
#include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/reset.h>
#include <mach/ohci.h>
@@ -56,6 +55,7 @@
static DEFINE_PXA3_CKEN(pxa3xx_pwm1, PWM1, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc1, MMC1, 19500000, 0);
static DEFINE_PXA3_CKEN(pxa3xx_mmc2, MMC2, 19500000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_gpio, GPIO, 13000000, 0);
static DEFINE_CK(pxa3xx_lcd, LCD, &clk_pxa3xx_hsio_ops);
static DEFINE_CK(pxa3xx_smemc, SMC, &clk_pxa3xx_smemc_ops);
@@ -89,6 +89,7 @@
INIT_CLKREG(&clk_pxa3xx_mmc1, "pxa2xx-mci.0", NULL),
INIT_CLKREG(&clk_pxa3xx_mmc2, "pxa2xx-mci.1", NULL),
INIT_CLKREG(&clk_pxa3xx_smemc, "pxa2xx-pcmcia", NULL),
+ INIT_CLKREG(&clk_pxa3xx_gpio, "pxa-gpio", NULL),
};
#ifdef CONFIG_PM
@@ -366,7 +367,8 @@
.irq_set_type = pxa_set_ext_wakeup_type,
};
-static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+static void __init pxa_init_ext_wakeup_irq(int (*fn)(struct irq_data *,
+ unsigned int))
{
int irq;
@@ -389,7 +391,6 @@
pxa_init_irq(56, pxa3xx_set_wake);
pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
static struct map_desc pxa3xx_io_desc[] __initdata = {
@@ -418,6 +419,7 @@
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&pxa27x_device_udc,
&pxa_device_pmu,
&pxa_device_i2s,
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 210b722..fccc644 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -20,7 +20,6 @@
#include <linux/syscore_ops.h>
#include <mach/hardware.h>
-#include <mach/gpio-pxa.h>
#include <mach/pxa3xx-regs.h>
#include <mach/pxa930.h>
#include <mach/reset.h>
@@ -212,6 +211,7 @@
static DEFINE_PXA3_CKEN(pxa95x_ssp4, SSP4, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa95x_pwm0, PWM0, 13000000, 0);
static DEFINE_PXA3_CKEN(pxa95x_pwm1, PWM1, 13000000, 0);
+static DEFINE_PXA3_CKEN(pxa95x_gpio, GPIO, 13000000, 0);
static struct clk_lookup pxa95x_clkregs[] = {
INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"),
@@ -231,12 +231,12 @@
INIT_CLKREG(&clk_pxa95x_ssp4, "pxa27x-ssp.3", NULL),
INIT_CLKREG(&clk_pxa95x_pwm0, "pxa27x-pwm.0", NULL),
INIT_CLKREG(&clk_pxa95x_pwm1, "pxa27x-pwm.1", NULL),
+ INIT_CLKREG(&clk_pxa95x_gpio, "pxa-gpio", NULL),
};
void __init pxa95x_init_irq(void)
{
pxa_init_irq(96, NULL);
- pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
}
/*
@@ -249,6 +249,7 @@
}
static struct platform_device *devices[] __initdata = {
+ &pxa_device_gpio,
&sa1100_device_rtc,
&pxa_device_rtc,
&pxa27x_device_ssp1,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index f0c05f4..78d6437 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -292,8 +292,8 @@
.flags = IORESOURCE_MEM,
},
{
- .start = gpio_to_irq(GPIO_ETH_IRQ),
- .end = gpio_to_irq(GPIO_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
}
};
@@ -672,7 +672,7 @@
.chip_select = 1, \
.controller_data = (void *) GPIO_ACCEL_CS, \
.platform_data = &lis3_pdata, \
- .irq = gpio_to_irq(GPIO_ACCEL_IRQ), \
+ .irq = PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ), \
}
#define SPI_DAC7512 \
@@ -956,7 +956,7 @@
static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
.type = "eeti_ts",
.addr = 0x0a,
- .irq = gpio_to_irq(GPIO_TOUCH_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
.platform_data = &eeti_ts_pdata,
};
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..423ec89 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -96,8 +96,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO97)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -502,7 +502,7 @@
.type = "da9034",
.addr = 0x34,
.platform_data = &saar_da9034_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e3..d1cdd6a 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -92,7 +92,7 @@
.type = "88PM860x",
.addr = 0x34,
.platform_data = &saarb_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 785880f..8d5168d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -907,24 +907,24 @@
gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
}
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
}
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
}
}
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
}
}
@@ -953,14 +953,14 @@
led_trigger_unregister_simple(sharpsl_charge_led_trigger);
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->batfull_irq)
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
gpio_free(sharpsl_pm.machinfo->gpio_batlock);
gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 953a919..1b39cec 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -552,7 +552,7 @@
.chip_select = 0,
.platform_data = &spitz_ads7846_info,
.controller_data = &spitz_ads7846_chip,
- .irq = gpio_to_irq(SPITZ_GPIO_TP_INT),
+ .irq = PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT),
}, {
.modalias = "corgi-lcd",
.max_speed_hz = 50000,
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 094279a..34cbdac 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -15,6 +15,7 @@
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/apm-emulation.h>
@@ -41,6 +42,7 @@
static struct gpio spitz_charger_gpios[] = {
{ SPITZ_GPIO_KEY_INT, GPIOF_IN, "Keyboard Interrupt" },
{ SPITZ_GPIO_SYNC, GPIOF_IN, "Sync" },
+ { SPITZ_GPIO_AC_IN, GPIOF_IN, "Charger Detection" },
{ SPITZ_GPIO_ADC_TEMP_ON, GPIOF_OUT_INIT_LOW, "ADC Temp On" },
{ SPITZ_GPIO_JK_B, GPIOF_OUT_INIT_LOW, "JK B" },
{ SPITZ_GPIO_CHRG_ON, GPIOF_OUT_INIT_LOW, "Charger On" },
@@ -169,14 +171,19 @@
static unsigned long spitz_charger_wakeup(void)
{
- return (~GPLR0 & GPIO_bit(SPITZ_GPIO_KEY_INT)) | (GPLR0 & GPIO_bit(SPITZ_GPIO_SYNC));
+ unsigned long ret;
+ ret = (!gpio_get_value(SPITZ_GPIO_KEY_INT)
+ << GPIO_bit(SPITZ_GPIO_KEY_INT))
+ | (!gpio_get_value(SPITZ_GPIO_SYNC)
+ << GPIO_bit(SPITZ_GPIO_SYNC));
+ return ret;
}
unsigned long spitzpm_read_devdata(int type)
{
switch (type) {
case SHARPSL_STATUS_ACIN:
- return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
+ return !gpio_get_value(SPITZ_GPIO_AC_IN);
case SHARPSL_STATUS_LOCK:
return gpio_get_value(sharpsl_pm.machinfo->gpio_batlock);
case SHARPSL_STATUS_CHRGFULL:
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..940ca56 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -376,7 +376,7 @@
.bus_num = 1,
.chip_select = 0,
.controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, {
.modalias = "cc2420",
.max_speed_hz = 6500000,
@@ -546,7 +546,7 @@
.type = "da9030",
.addr = 0x49,
.platform_data = &imote2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
@@ -560,18 +560,18 @@
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, { /* IMB400 Multimedia board */
.type = "wm8940",
.addr = 0x1A,
@@ -661,8 +661,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(40),
- .end = IRQ_GPIO(40),
+ .start = PXA_GPIO_TO_IRQ(40),
+ .end = PXA_GPIO_TO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -707,7 +707,7 @@
}
gpio_direction_input(SG2_GPIO_nSD_DETECT);
- err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+ err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
stargate2_detect_int,
IRQ_TYPE_EDGE_BOTH,
"MMC card detect",
@@ -738,7 +738,7 @@
static void stargate2_mci_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+ free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
gpio_free(SG2_SD_POWER_ENABLE);
gpio_free(SG2_GPIO_nSD_DETECT);
}
@@ -913,7 +913,7 @@
.type = "da9030",
.addr = 0x49,
.platform_data = &stargate2_da9030_pdata,
- .irq = gpio_to_irq(1),
+ .irq = PXA_GPIO_TO_IRQ(1),
},
};
@@ -938,18 +938,18 @@
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
},
};
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..43bdcb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -85,8 +85,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
- .end = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO47)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..46c60b3 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -101,7 +101,7 @@
.type = "88PM860x",
.addr = 0x34,
.platform_data = &evb3_pm8607_info,
- .irq = gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO83)),
+ .irq = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO83)),
},
};
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 402b0c9..1ddb982 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -404,8 +404,8 @@
static struct resource tosa_power_resource[] = {
{
.name = "ac",
- .start = gpio_to_irq(TOSA_GPIO_AC_IN),
- .end = gpio_to_irq(TOSA_GPIO_AC_IN),
+ .start = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
+ .end = PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
.flags = IORESOURCE_IRQ |
IORESOURCE_IRQ_HIGHEDGE |
IORESOURCE_IRQ_LOWEDGE,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..d9a653a 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -422,8 +422,8 @@
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = gpio_to_irq(VIPER_ETH_GPIO),
- .end = gpio_to_irq(VIPER_ETH_GPIO),
+ .start = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_ETH_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
[2] = {
@@ -546,7 +546,7 @@
/* External UARTs */
{
.mapbase = VIPER_UARTA_PHYS,
- .irq = gpio_to_irq(VIPER_UARTA_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -556,7 +556,7 @@
},
{
.mapbase = VIPER_UARTB_PHYS,
- .irq = gpio_to_irq(VIPER_UARTB_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(VIPER_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 1843200,
.regshift = 1,
@@ -596,8 +596,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(VIPER_USB_GPIO),
- .end = gpio_to_irq(VIPER_USB_GPIO),
+ .start = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
+ .end = PXA_GPIO_TO_IRQ(VIPER_USB_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index ca0c661..9edeec6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -395,8 +395,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
- .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -433,7 +433,7 @@
};
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
- .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
};
static struct platform_device vpac270_ucb1400_device = {
@@ -610,8 +610,8 @@
.flags = IORESOURCE_DMA
},
[3] = { /* IDE IRQ pin */
- .start = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
- .end = gpio_to_irq(GPIO36_VPAC270_IDE_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO36_VPAC270_IDE_IRQ),
.flags = IORESOURCE_IRQ
}
};
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c9..4246618 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -573,7 +573,7 @@
.modalias = "libertas_spi",
.platform_data = &z2_lbs_pdata,
.controller_data = &z2_lbs_chip_info,
- .irq = gpio_to_irq(GPIO36_ZIPITZ2_WIFI_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO36_ZIPITZ2_WIFI_IRQ),
.max_speed_hz = 13000000,
.bus_num = 1,
.chip_select = 0,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b..68de9c1 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -233,7 +233,7 @@
/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
{ /* COM1 */
.mapbase = 0x10000000,
- .irq = gpio_to_irq(ZEUS_UARTA_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTA_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -242,7 +242,7 @@
},
{ /* COM2 */
.mapbase = 0x10800000,
- .irq = gpio_to_irq(ZEUS_UARTB_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTB_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -251,7 +251,7 @@
},
{ /* COM3 */
.mapbase = 0x11000000,
- .irq = gpio_to_irq(ZEUS_UARTC_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTC_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -260,7 +260,7 @@
},
{ /* COM4 */
.mapbase = 0x11800000,
- .irq = gpio_to_irq(ZEUS_UARTD_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_UARTD_GPIO),
.irqflags = IRQF_TRIGGER_RISING,
.uartclk = 14745600,
.regshift = 1,
@@ -321,8 +321,8 @@
.flags = IORESOURCE_MEM
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH0_GPIO),
- .end = gpio_to_irq(ZEUS_ETH0_GPIO),
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH0_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -339,8 +339,8 @@
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = gpio_to_irq(ZEUS_ETH1_GPIO),
- .end = gpio_to_irq(ZEUS_ETH1_GPIO),
+ .start = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
+ .end = PXA_GPIO_TO_IRQ(ZEUS_ETH1_GPIO),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
};
@@ -423,7 +423,7 @@
[0] = {
.modalias = "mcp2515",
.platform_data = &zeus_mcp2515_pdata,
- .irq = gpio_to_irq(ZEUS_CAN_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_CAN_GPIO),
.max_speed_hz = 1*1000*1000,
.bus_num = 3,
.mode = SPI_MODE_0,
@@ -753,7 +753,7 @@
{
I2C_BOARD_INFO("pca9535", 0x20),
.platform_data = &zeus_pca953x_pdata[2],
- .irq = gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+ .irq = PXA_GPIO_TO_IRQ(ZEUS_EXTGPIO_GPIO),
},
{ I2C_BOARD_INFO("lm75a", 0x48) },
{ I2C_BOARD_INFO("24c01", 0x50) },
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 6c39c33..a4c8075 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -408,8 +408,8 @@
* Note: We depend that the bootloader set
* the correct value to MSC register for SMC91x.
*/
- smc91x_resources[1].start = gpio_to_irq(gpio_eth_irq);
- smc91x_resources[1].end = gpio_to_irq(gpio_eth_irq);
+ smc91x_resources[1].start = PXA_GPIO_TO_IRQ(gpio_eth_irq);
+ smc91x_resources[1].end = PXA_GPIO_TO_IRQ(gpio_eth_irq);
platform_device_register(&smc91x_device);
pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 93c64d8..86e59c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -231,12 +231,12 @@
.type = "pca9539",
.addr = 0x74,
.platform_data = &gpio_exp[0],
- .irq = IRQ_GPIO(18),
+ .irq = PXA_GPIO_TO_IRQ(18),
}, {
.type = "pca9539",
.addr = 0x75,
.platform_data = &gpio_exp[1],
- .irq = IRQ_GPIO(19),
+ .irq = PXA_GPIO_TO_IRQ(19),
},
};
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index a20ae1a..71b9558 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -164,22 +164,6 @@
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc bast_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg bast_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -187,8 +171,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
[1] = {
.hwport = 1,
@@ -196,8 +178,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
@@ -206,8 +186,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = bast_serial_clocks,
- .clocks_size = ARRAY_SIZE(bast_serial_clocks),
}
};
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index df47e8e..0f0a9a1 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -109,23 +109,6 @@
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-/* uart clock source(s) */
-
-static struct s3c24xx_uart_clksrc vr1000_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0.
- }
-};
-
static struct s3c2410_uartcfg vr1000_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -133,8 +116,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
},
[1] = {
.hwport = 1,
@@ -142,8 +123,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
},
/* port 2 is not actually used */
[2] = {
@@ -152,9 +131,6 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = vr1000_serial_clocks,
- .clocks_size = ARRAY_SIZE(vr1000_serial_clocks),
-
}
};
diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 3d7ebc5..af74927 100644
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -123,12 +123,18 @@
.id = -1,
};
+static struct clk_lookup s3c2410_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+};
+
void __init s3c2410_init_clocks(int xtal)
{
s3c24xx_register_baseclocks(xtal);
s3c2410_setup_clocks();
s3c2410_baseclk_add();
s3c24xx_register_clock(&s3c2410_armclk);
+ clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
}
struct sysdev_class s3c2410_sysclass = {
diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c
index 140711d..cd50291 100644
--- a/arch/arm/mach-s3c2412/clock.c
+++ b/arch/arm/mach-s3c2412/clock.c
@@ -659,6 +659,12 @@
&clk_armclk,
};
+static struct clk_lookup s3c2412_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
+};
+
int __init s3c2412_baseclk_add(void)
{
unsigned long clkcon = __raw_readl(S3C2410_CLKCON);
@@ -751,6 +757,7 @@
s3c2412_clkcon_enable(clkp, 0);
}
+ clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
s3c_pwmclk_init();
return 0;
}
diff --git a/arch/arm/mach-s3c2416/Makefile b/arch/arm/mach-s3c2416/Makefile
index 7b805b2..ca0cd22 100644
--- a/arch/arm/mach-s3c2416/Makefile
+++ b/arch/arm/mach-s3c2416/Makefile
@@ -15,7 +15,6 @@
#obj-$(CONFIG_S3C2416_DMA) += dma.o
# Device setup
-obj-$(CONFIG_S3C2416_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C2416_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
# Machine support
diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c
index afbbe8b..59f54d1 100644
--- a/arch/arm/mach-s3c2416/clock.c
+++ b/arch/arm/mach-s3c2416/clock.c
@@ -90,39 +90,38 @@
},
};
-static struct clksrc_clk hsmmc_mux[] = {
- [0] = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 6),
- .enable = s3c2443_clkcon_enable_s,
- },
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk *[]) {
- [0] = &hsmmc_div[0].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+static struct clksrc_clk hsmmc_mux0 = {
+ .clk = {
+ .name = "hsmmc-if",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 6),
+ .enable = s3c2443_clkcon_enable_s,
},
- [1] = {
- .clk = {
- .name = "hsmmc-if",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 12),
- .enable = s3c2443_clkcon_enable_s,
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk * []) {
+ [0] = &hsmmc_div[0].clk,
+ [1] = NULL, /* to fix */
},
- .sources = &(struct clksrc_sources) {
- .nr_sources = 2,
- .sources = (struct clk *[]) {
- [0] = &hsmmc_div[1].clk,
- [1] = NULL, /* to fix */
- },
- },
- .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
},
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
+};
+
+static struct clksrc_clk hsmmc_mux1 = {
+ .clk = {
+ .name = "hsmmc-if",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 12),
+ .enable = s3c2443_clkcon_enable_s,
+ },
+ .sources = &(struct clksrc_sources) {
+ .nr_sources = 2,
+ .sources = (struct clk * []) {
+ [0] = &hsmmc_div[1].clk,
+ [1] = NULL, /* to fix */
+ },
+ },
+ .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
};
static struct clk hsmmc0_clk = {
@@ -144,8 +143,14 @@
&hsspi_mux,
&hsmmc_div[0],
&hsmmc_div[1],
- &hsmmc_mux[0],
- &hsmmc_mux[1],
+ &hsmmc_mux0,
+ &hsmmc_mux1,
+};
+
+static struct clk_lookup s3c2416_clk_lookup[] = {
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
};
void __init s3c2416_init_clocks(int xtal)
@@ -167,6 +172,7 @@
s3c_register_clksrc(clksrcs[ptr], 1);
s3c24xx_register_clock(&hsmmc0_clk);
+ clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
s3c_pwmclk_init();
diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c
deleted file mode 100644
index cee5395..0000000
--- a/arch/arm/mach-s3c2416/setup-sdhci.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/setup-sdhci.c
- *
- * Copyright 2010 Promwad Innovation Company
- * Yauhen Kharuzhy <yauhen.kharuzhy@promwad.com>
- *
- * S3C2416 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * Based on mach-s3c64xx/setup-sdhci.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c2416_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "hsmmc-if",
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c
index f9e6bda..c9879af 100644
--- a/arch/arm/mach-s3c2440/clock.c
+++ b/arch/arm/mach-s3c2440/clock.c
@@ -34,6 +34,7 @@
#include <linux/mutex.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/serial_core.h>
#include <mach/hardware.h>
#include <linux/atomic.h>
@@ -43,6 +44,7 @@
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/regs-serial.h>
/* S3C2440 extended clock support */
@@ -108,6 +110,46 @@
.ctrlbit = S3C2440_CLKCON_CAMERA,
};
+static unsigned long s3c2440_fclk_n_getrate(struct clk *clk)
+{
+ unsigned long ucon0, ucon1, ucon2, divisor;
+
+ /* the fun of calculating the uart divisors on the s3c2440 */
+ ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
+ ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
+ ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
+
+ ucon0 &= S3C2440_UCON0_DIVMASK;
+ ucon1 &= S3C2440_UCON1_DIVMASK;
+ ucon2 &= S3C2440_UCON2_DIVMASK;
+
+ if (ucon0 != 0)
+ divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
+ else if (ucon1 != 0)
+ divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
+ else if (ucon2 != 0)
+ divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
+ else
+ /* manual calims 44, seems to be 9 */
+ divisor = 9;
+
+ return clk_get_rate(clk->parent) / divisor;
+}
+
+static struct clk s3c2440_clk_fclk_n = {
+ .name = "fclk_n",
+ .parent = &clk_f,
+ .ops = &(struct clk_ops) {
+ .get_rate = s3c2440_fclk_n_getrate,
+ },
+};
+
+static struct clk_lookup s3c2440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
+};
+
static int s3c2440_clk_add(struct sys_device *sysdev)
{
struct clk *clock_upll;
@@ -126,10 +168,12 @@
s3c2440_clk_cam.parent = clock_h;
s3c2440_clk_ac97.parent = clock_p;
s3c2440_clk_cam_upll.parent = clock_upll;
+ s3c24xx_register_clock(&s3c2440_clk_fclk_n);
s3c24xx_register_clock(&s3c2440_clk_ac97);
s3c24xx_register_clock(&s3c2440_clk_cam);
s3c24xx_register_clock(&s3c2440_clk_cam_upll);
+ clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
clk_disable(&s3c2440_clk_ac97);
clk_disable(&s3c2440_clk_cam);
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 74f92fc..d8f36c0 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -96,22 +96,6 @@
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg anubis_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -119,8 +103,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 2,
@@ -128,8 +111,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = anubis_serial_clocks,
- .clocks_size = ARRAY_SIZE(anubis_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
};
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 38887ee..aa86ca8 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -57,22 +57,6 @@
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
-static struct s3c24xx_uart_clksrc at2440evb_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
-
static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -80,8 +64,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 1,
@@ -89,8 +72,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = at2440evb_serial_clocks,
- .clocks_size = ARRAY_SIZE(at2440evb_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
};
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index dc142eb..d7e47b2 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -100,21 +100,6 @@
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-static struct s3c24xx_uart_clksrc osiris_serial_clocks[] = {
- [0] = {
- .name = "uclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
static struct s3c2410_uartcfg osiris_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -122,8 +107,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[1] = {
.hwport = 1,
@@ -131,8 +115,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
},
[2] = {
.hwport = 2,
@@ -140,8 +123,7 @@
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
- .clocks = osiris_serial_clocks,
- .clocks_size = ARRAY_SIZE(osiris_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL1 | S3C2410_UCON_CLKSEL2,
}
};
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 0d3453b..4267cd5 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -68,15 +68,6 @@
static struct map_desc rx1950_iodesc[] __initdata = {
};
-static struct s3c24xx_uart_clksrc rx1950_serial_clocks[] = {
- [0] = {
- .name = "fclk",
- .divisor = 0x0a,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
static struct s3c2410_uartcfg rx1950_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
@@ -84,8 +75,7 @@
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
[1] = {
.hwport = 1,
@@ -93,8 +83,7 @@
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
/* IR port */
[2] = {
@@ -103,8 +92,7 @@
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0xf1,
- .clocks = rx1950_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx1950_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
};
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index e19499c..3d5e2e6 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -67,16 +67,6 @@
},
};
-
-static struct s3c24xx_uart_clksrc rx3715_serial_clocks[] = {
- [0] = {
- .name = "fclk",
- .divisor = 0,
- .min_baud = 0,
- .max_baud = 0,
- }
-};
-
static struct s3c2410_uartcfg rx3715_uartcfgs[] = {
[0] = {
.hwport = 0,
@@ -84,8 +74,7 @@
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
[1] = {
.hwport = 1,
@@ -93,8 +82,7 @@
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x00,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
},
/* IR port */
[2] = {
@@ -103,8 +91,7 @@
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
- .clocks = rx3715_serial_clocks,
- .clocks_size = ARRAY_SIZE(rx3715_serial_clocks),
+ .clk_sel = S3C2410_UCON_CLKSEL3,
}
};
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 5552e04..90b34ab7 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -77,6 +77,11 @@
help
Common setup code for S3C64XX SDHCI GPIO configurations
+config S3C64XX_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
# S36400 Macchine support
config MACH_SMDK6400
@@ -276,6 +281,7 @@
select S3C64XX_SETUP_IDE
select S3C64XX_SETUP_FB_24BPP
select S3C64XX_SETUP_KEYPAD
+ select S3C64XX_SETUP_SPI
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_KEYPAD
select S3C_DEV_USB_HOST
@@ -286,7 +292,7 @@
select S3C_DEV_I2C1
select S3C_DEV_WDT
select S3C_DEV_RTC
- select S3C64XX_DEV_SPI
+ select S3C64XX_DEV_SPI0
select S3C24XX_GPIO_EXTRA128
select I2C
help
diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile
index cfc0b99..d7d9bb5 100644
--- a/arch/arm/mach-s3c64xx/Makefile
+++ b/arch/arm/mach-s3c64xx/Makefile
@@ -32,9 +32,9 @@
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S3C64XX_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
# PM
@@ -60,4 +60,3 @@
obj-y += dev-uart.o
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c
index 39c238d..0187cde 100644
--- a/arch/arm/mach-s3c64xx/clock.c
+++ b/arch/arm/mach-s3c64xx/clock.c
@@ -184,18 +184,6 @@
.enable = s3c64xx_pclk_ctrl,
.ctrlbit = S3C_CLKCON_PCLK_SPI1,
}, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_48m,
- .enable = s3c64xx_sclk_ctrl,
- .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
- }, {
.name = "48m",
.devname = "s3c-sdhci.0",
.parent = &clk_48m,
@@ -226,6 +214,22 @@
},
};
+static struct clk clk_48m_spi0 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0_48,
+};
+
+static struct clk clk_48m_spi1 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_48m,
+ .enable = s3c64xx_sclk_ctrl,
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1_48,
+};
+
static struct clk init_clocks[] = {
{
.name = "lcd",
@@ -243,24 +247,6 @@
.enable = s3c64xx_hclk_ctrl,
.ctrlbit = S3C_CLKCON_HCLK_UHOST,
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_h,
- .enable = s3c64xx_hclk_ctrl,
- .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
- }, {
.name = "otg",
.parent = &clk_h,
.enable = s3c64xx_hclk_ctrl,
@@ -310,6 +296,29 @@
}
};
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC0,
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC1,
+};
+
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_HSMMC2,
+};
static struct clk clk_fout_apll = {
.name = "fout_apll",
@@ -578,36 +587,6 @@
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.0",
- .ctrlbit = S3C_CLKCON_SCLK_MMC0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.1",
- .ctrlbit = S3C_CLKCON_SCLK_MMC1,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "mmc_bus",
- .devname = "s3c-sdhci.2",
- .ctrlbit = S3C_CLKCON_SCLK_MMC2,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
.name = "usb-bus-host",
.ctrlbit = S3C_CLKCON_SCLK_UHOST,
.enable = s3c64xx_sclk_ctrl,
@@ -617,35 +596,6 @@
.sources = &clkset_uhost,
}, {
.clk = {
- .name = "uclk1",
- .ctrlbit = S3C_CLKCON_SCLK_UART,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
- .sources = &clkset_uart,
- }, {
-/* Where does UCLK0 come from? */
- .clk = {
- .name = "spi-bus",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = S3C_CLKCON_SCLK_SPI0,
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
- .name = "spi-bus",
- .devname = "s3c64xx-spi.1",
- .enable = s3c64xx_sclk_ctrl,
- },
- .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
- .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
- .sources = &clkset_spi_mmc,
- }, {
- .clk = {
.name = "audio-bus",
.devname = "samsung-i2s.0",
.ctrlbit = S3C_CLKCON_SCLK_AUDIO0,
@@ -695,6 +645,78 @@
},
};
+/* Where does UCLK0 come from? */
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = S3C_CLKCON_SCLK_UART,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 16, .size = 4 },
+ .sources = &clkset_uart,
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "mmc_bus",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = S3C_CLKCON_SCLK_MMC2,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV1, .shift = 8, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "spi-bus",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = S3C_CLKCON_SCLK_SPI0,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 0, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "spi-bus",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = S3C_CLKCON_SCLK_SPI1,
+ .enable = s3c64xx_sclk_ctrl,
+ },
+ .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S3C_CLK_DIV2, .shift = 4, .size = 4 },
+ .sources = &clkset_spi_mmc,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
@@ -703,6 +725,39 @@
&clk_mout_mpll,
};
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_48m_spi0,
+ &clk_48m_spi1,
+};
+
+static struct clk_lookup s3c64xx_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_48m_spi0),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_48m_spi1),
+};
+
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
void __init_or_cpufreq s3c6400_setup_clocks(void)
@@ -811,6 +866,8 @@
void __init s3c64xx_register_clocks(unsigned long xtal,
unsigned armclk_divlimit)
{
+ unsigned int cnt;
+
armclk_mask = armclk_divlimit;
s3c24xx_register_baseclocks(xtal);
@@ -821,7 +878,15 @@
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (cnt = 0; cnt < ARRAY_SIZE(clk_cdev); cnt++)
+ s3c_disable_clocks(clk_cdev[cnt], 1);
+
s3c24xx_register_clocks(clks1, ARRAY_SIZE(clks1));
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+ for (cnt = 0; cnt < ARRAY_SIZE(clksrc_cdev); cnt++)
+ s3c_register_clksrc(clksrc_cdev[cnt], 1);
+ clkdev_add_table(s3c64xx_clk_lookup, ARRAY_SIZE(s3c64xx_clk_lookup));
+
s3c_pwmclk_init();
}
diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c
deleted file mode 100644
index 3341fd1..0000000
--- a/arch/arm/mach-s3c64xx/dev-spi.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/* linux/arch/arm/plat-s3c64xx/dev-spi.c
- *
- * Copyright (C) 2009 Samsung Electronics Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/export.h>
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/devs.h>
-
-static char *spi_src_clks[] = {
- [S3C64XX_SPI_SRCCLK_PCLK] = "pclk",
- [S3C64XX_SPI_SRCCLK_SPIBUS] = "spi-bus",
- [S3C64XX_SPI_SRCCLK_48M] = "spi_48m",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the GPC-3,7.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S3C64XX_GPC(0);
- break;
-
- case 1:
- base = S3C64XX_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s3c64xx_spi0_resource[] = {
- [0] = {
- .start = S3C64XX_PA_SPI0,
- .end = S3C64XX_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
- .cfg_gpio = s3c64xx_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s3c64xx_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
- .resource = s3c64xx_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c64xx_spi0_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_spi0);
-
-static struct resource s3c64xx_spi1_resource[] = {
- [0] = {
- .start = S3C64XX_PA_SPI1,
- .end = S3C64XX_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
- .cfg_gpio = s3c64xx_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .tx_st_done = 21,
-};
-
-struct platform_device s3c64xx_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
- .resource = s3c64xx_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s3c64xx_spi1_pdata,
- },
-};
-EXPORT_SYMBOL(s3c64xx_device_spi1);
-
-void __init s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S3C64XX_SPI_SRCCLK_48M) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s3c64xx_spi0_pdata;
- break;
- case 1:
- pd = &s3c64xx_spi1_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h
index 23a1d71..8e2097b 100644
--- a/arch/arm/mach-s3c64xx/include/mach/map.h
+++ b/arch/arm/mach-s3c64xx/include/mach/map.h
@@ -115,6 +115,8 @@
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_PA_RTC S3C64XX_PA_RTC
#define S3C_PA_WDT S3C64XX_PA_WATCHDOG
+#define S3C_PA_SPI0 S3C64XX_PA_SPI0
+#define S3C_PA_SPI1 S3C64XX_PA_SPI1
#define SAMSUNG_PA_ADC S3C64XX_PA_ADC
#define SAMSUNG_PA_CFCON S3C64XX_PA_CFCON
diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c
deleted file mode 100644
index c75a71b..0000000
--- a/arch/arm/mach-s3c64xx/setup-sdhci.c
+++ /dev/null
@@ -1,24 +0,0 @@
-/* linux/arch/arm/mach-s3c64xx/setup-sdhci.c
- *
- * Copyright 2008 Simtec Electronics
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * S3C6400/S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s3c64xx_hsmmc_clksrcs[4] = {
- [0] = "hsmmc",
- [1] = "hsmmc",
- [2] = "mmc_bus",
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s3c64xx/setup-spi.c b/arch/arm/mach-s3c64xx/setup-spi.c
new file mode 100644
index 0000000..d9592ad
--- /dev/null
+++ b/arch/arm/mach-s3c64xx/setup-spi.c
@@ -0,0 +1,45 @@
+/* linux/arch/arm/mach-s3c64xx/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S3C64XX_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 18690c5..c87f610 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -36,6 +36,16 @@
help
Common setup code for i2c bus 1.
+config S5P64X0_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations
+
+config S5P64X0_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for SDHCI gpio.
+
# machine support
config MACH_SMDK6440
@@ -45,13 +55,16 @@
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select S3C64XX_DEV_SPI
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6440
@@ -62,14 +75,28 @@
select S3C_DEV_I2C1
select S3C_DEV_RTC
select S3C_DEV_WDT
- select S3C64XX_DEV_SPI
+ select S3C_DEV_HSMMC
+ select S3C_DEV_HSMMC1
+ select S3C_DEV_HSMMC2
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_PWM
select SAMSUNG_DEV_TS
select S5P64X0_SETUP_FB_24BPP
select S5P64X0_SETUP_I2C1
+ select S5P64X0_SETUP_SDHCI_GPIO
help
Machine support for the Samsung SMDK6450
+menu "Use 8-bit SDHCI bus width"
+
+config S5P64X0_SD_CH1_8BIT
+ bool "SDHCI Channel 1 (Slot 1)"
+ depends on MACH_SMDK6450 || MACH_SMDK6440
+ help
+ Support SDHCI Channel 1 8-bit bus.
+ If selected, Channel 2 is disabled.
+
+endmenu
+
endif
diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile
index a1324d8..b44cc04 100644
--- a/arch/arm/mach-s5p64x0/Makefile
+++ b/arch/arm/mach-s5p64x0/Makefile
@@ -26,7 +26,8 @@
# device support
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5P64X0_SETUP_SPI) += setup-spi.o
+obj-$(CONFIG_S5P64X0_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c
index c54c65d..c041ad7 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6440.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c
@@ -268,18 +268,6 @@
.enable = s5p64x0_pclk_ctrl,
.ctrlbit = (1 << 31),
}, {
- .name = "sclk_spi_48",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 22),
- }, {
- .name = "sclk_spi_48",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_48m,
- .enable = s5p64x0_sclk_ctrl,
- .ctrlbit = (1 << 23),
- }, {
.name = "mmc_48m",
.devname = "s3c-sdhci.0",
.parent = &clk_48m,
@@ -391,65 +379,6 @@
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group1,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_post",
.ctrlbit = (1 << 10),
.enable = s5p64x0_sclk_ctrl,
@@ -487,6 +416,77 @@
},
};
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 24),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 25),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 26),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group1,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -505,6 +505,26 @@
.id = -1,
};
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2
+};
+
+static struct clk_lookup s5p6440_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
void __init_or_cpufreq s5p6440_setup_clocks(void)
{
struct clk *xtal_clk;
@@ -583,9 +603,12 @@
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6440_clk_lookup, ARRAY_SIZE(s5p6440_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c
index 2d04abf..b5087cb 100644
--- a/arch/arm/mach-s5p64x0/clock-s5p6450.c
+++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c
@@ -413,65 +413,6 @@
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 24),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 25),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 26),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 5),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 20),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 21),
- .enable = s5p64x0_sclk_ctrl,
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
- .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_fimc",
.ctrlbit = (1 << 10),
.enable = s5p64x0_sclk_ctrl,
@@ -536,6 +477,97 @@
},
};
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 24),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 18, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 25),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 20, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 26),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 22, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uclk = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 5),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 13, .size = 1 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 20),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 14, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 21),
+ .enable = s5p64x0_sclk_ctrl,
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 16, .size = 2 },
+ .reg_div = { .reg = S5P64X0_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uclk,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+};
+
+static struct clk_lookup s5p6450_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_pclk_low.clk),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uclk.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+};
+
/* Clock initialization code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -634,9 +666,12 @@
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5p6450_clk_lookup, ARRAY_SIZE(s5p6450_clk_lookup));
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index ecab40c..f6e24f3 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -40,6 +40,7 @@
#include <plat/s5p6450.h>
#include <plat/adc-core.h>
#include <plat/fb-core.h>
+#include <plat/sdhci.h>
/* Initial IO mappings */
@@ -112,6 +113,10 @@
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6440_default_sdhci2();
+
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
init_consistent_dma_size(SZ_8M);
@@ -123,6 +128,10 @@
s3c_adc_setname("s3c64xx-adc");
s3c_fb_setname("s5p64x0-fb");
+ s5p64x0_default_sdhci0();
+ s5p64x0_default_sdhci1();
+ s5p6450_default_sdhci2();
+
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
init_consistent_dma_size(SZ_8M);
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
deleted file mode 100644
index 1fd9c79..0000000
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ /dev/null
@@ -1,224 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/dev-spi.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/regs-clock.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/cpu.h>
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *s5p64x0_spi_src_clks[] = {
- [S5P64X0_SPI_SRCCLK_PCLK] = "pclk",
- [S5P64X0_SPI_SRCCLK_SCLK] = "sclk_spi",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5p6440_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6440_GPC(0);
- break;
-
- case 1:
- base = S5P6440_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static int s5p6450_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5P6450_GPC(0);
- break;
-
- case 1:
- base = S5P6450_GPC(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s5p64x0_spi0_resource[] = {
- [0] = {
- .start = S5P64X0_PA_SPI0,
- .end = S5P64X0_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6440_spi0_pdata = {
- .cfg_gpio = s5p6440_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static struct s3c64xx_spi_info s5p6450_spi0_pdata = {
- .cfg_gpio = s5p6450_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5p64x0_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5p64x0_spi0_resource),
- .resource = s5p64x0_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-static struct resource s5p64x0_spi1_resource[] = {
- [0] = {
- .start = S5P64X0_PA_SPI1,
- .end = S5P64X0_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5p6440_spi1_pdata = {
- .cfg_gpio = s5p6440_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-static struct s3c64xx_spi_info s5p6450_spi1_pdata = {
- .cfg_gpio = s5p6450_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .tx_st_done = 25,
-};
-
-struct platform_device s5p64x0_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5p64x0_spi1_resource),
- .resource = s5p64x0_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- if (soc_is_s5p6450())
- pd = &s5p6450_spi0_pdata;
- else
- pd = &s5p6440_spi0_pdata;
-
- s5p64x0_device_spi0.dev.platform_data = pd;
- break;
- case 1:
- if (soc_is_s5p6450())
- pd = &s5p6450_spi1_pdata;
- else
- pd = &s5p6440_spi1_pdata;
-
- s5p64x0_device_spi1.dev.platform_data = pd;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = s5p64x0_spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index 442dd4a..f820c07 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -38,176 +38,74 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri s5p6440_pdma_peri[22] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- },
+u8 s5p6440_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
};
struct dma_pl330_platdata s5p6440_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri),
- .peri = s5p6440_pdma_peri,
+ .peri_id = s5p6440_pdma_peri,
};
-struct dma_pl330_peri s5p6450_pdma_peri[32] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART4_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART4_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_USI_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_USI_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_UART5_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART5_TX,
- .rqtype = MEMTODEV,
- },
+u8 s5p6450_pdma_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_UART4_RX,
+ DMACH_UART4_TX,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_PCM1_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM2_TX,
+ DMACH_PCM2_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_USI_TX,
+ DMACH_USI_RX,
+ DMACH_MAX,
+ DMACH_I2S1_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S2_TX,
+ DMACH_I2S2_RX,
+ DMACH_PWM,
+ DMACH_UART5_RX,
+ DMACH_UART5_TX,
};
struct dma_pl330_platdata s5p6450_pdma_pdata = {
.nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri),
- .peri = s5p6450_pdma_peri,
+ .peri_id = s5p6450_pdma_peri,
};
struct amba_device s5p64x0_device_pdma = {
@@ -227,10 +125,15 @@
static int __init s5p64x0_dma_init(void)
{
- if (soc_is_s5p6450())
+ if (soc_is_s5p6450()) {
+ dma_cap_set(DMA_SLAVE, s5p6450_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6450_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
- else
+ } else {
+ dma_cap_set(DMA_SLAVE, s5p6440_pdma_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5p6440_pdma_pdata.cap_mask);
s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
+ }
amba_device_register(&s5p64x0_device_pdma, &iomem_resource);
diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h
index 53982db..5b845e8 100644
--- a/arch/arm/mach-s5p64x0/include/mach/irqs.h
+++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h
@@ -141,6 +141,8 @@
#define IRQ_EINT_GROUP(grp, x) (IRQ_EINT_GROUP##grp##_BASE + (x))
+#define IRQ_TIMER_BASE (11)
+
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR + 1)
diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h
index 4d3ac8a..0c0175d 100644
--- a/arch/arm/mach-s5p64x0/include/mach/map.h
+++ b/arch/arm/mach-s5p64x0/include/mach/map.h
@@ -67,6 +67,8 @@
#define S3C_PA_RTC S5P64X0_PA_RTC
#define S3C_PA_WDT S5P64X0_PA_WDT
#define S3C_PA_FB S5P64X0_PA_FB
+#define S3C_PA_SPI0 S5P64X0_PA_SPI0
+#define S3C_PA_SPI1 S5P64X0_PA_SPI1
#define S5P_PA_CHIPID S5P64X0_PA_CHIPID
#define S5P_PA_SROMC S5P64X0_PA_SROMC
diff --git a/arch/arm/mach-s5p64x0/init.c b/arch/arm/mach-s5p64x0/init.c
index 79833ca..659a66c 100644
--- a/arch/arm/mach-s5p64x0/init.c
+++ b/arch/arm/mach-s5p64x0/init.c
@@ -23,36 +23,7 @@
#include <plat/s5p6450.h>
#include <plat/regs-serial.h>
-static struct s3c24xx_uart_clksrc s5p64x0_serial_clocks[] = {
- [0] = {
- .name = "pclk_low",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
- [1] = {
- .name = "uclk1",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
/* uart registration process */
-
-void __init s5p64x0_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5p64x0_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5p64x0_serial_clocks);
- }
- }
-}
-
void __init s5p6440_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
int uart;
@@ -62,12 +33,10 @@
s5p_uart_resources[uart].resources->end = S5P6440_PA_UART(uart) + S5P_SZ_UART;
}
- s5p64x0_common_init_uarts(cfg, no);
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
void __init s5p6450_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
- s5p64x0_common_init_uarts(cfg, no);
s3c24xx_init_uartdevs("s3c6400-uart", s5p_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 4a1250c..fe168a0 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
#include <linux/fb.h>
+#include <linux/mmc/host.h>
#include <video/platform_lcd.h>
@@ -52,6 +53,7 @@
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
#define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -161,6 +163,25 @@
&s5p6440_device_iis,
&s3c_device_fb,
&smdk6440_lcd_lte480wv,
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_INTERNAL,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6440_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
};
static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = {
@@ -234,6 +255,10 @@
s5p6440_set_lcd_interface();
s3c_fb_set_platdata(&smdk6440_lcd_pdata);
+ s3c_sdhci0_set_platdata(&smdk6440_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk6440_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdk6440_hsmmc2_pdata);
+
platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices));
}
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 0ab129e..242a415 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -24,6 +24,7 @@
#include <linux/gpio.h>
#include <linux/pwm_backlight.h>
#include <linux/fb.h>
+#include <linux/mmc/host.h>
#include <video/platform_lcd.h>
@@ -52,6 +53,7 @@
#include <plat/backlight.h>
#include <plat/fb.h>
#include <plat/regs-fb.h>
+#include <plat/sdhci.h>
#define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
@@ -179,10 +181,28 @@
&s5p6450_device_iis0,
&s3c_device_fb,
&smdk6450_lcd_lte480wv,
-
+ &s3c_device_hsmmc0,
+ &s3c_device_hsmmc1,
+ &s3c_device_hsmmc2,
/* s5p6450_device_spi0 will be added */
};
+static struct s3c_sdhci_platdata smdk6450_hsmmc0_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc1_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+#if defined(CONFIG_S5P64X0_SD_CH1_8BIT)
+ .max_width = 8,
+ .host_caps = MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk6450_hsmmc2_pdata __initdata = {
+ .cd_type = S3C_SDHCI_CD_NONE,
+};
+
static struct s3c2410_platform_i2c s5p6450_i2c0_data __initdata = {
.flags = 0,
.slave_addr = 0x10,
@@ -254,6 +274,10 @@
s5p6450_set_lcd_interface();
s3c_fb_set_platdata(&smdk6450_lcd_pdata);
+ s3c_sdhci0_set_platdata(&smdk6450_hsmmc0_pdata);
+ s3c_sdhci1_set_platdata(&smdk6450_hsmmc1_pdata);
+ s3c_sdhci2_set_platdata(&smdk6450_hsmmc2_pdata);
+
platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices));
}
diff --git a/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
new file mode 100644
index 0000000..8410af0
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
@@ -0,0 +1,104 @@
+/* linux/arch/arm/mach-s5p64x0/setup-sdhci-gpio.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com/
+ *
+ * S5P64X0 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/regs-clock.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/sdhci.h>
+#include <plat/cpu.h>
+
+void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set all the necessary GPG pins to special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPG(0), 2 + width,
+ S3C_GPIO_SFN(2));
+
+ /* Set GPG[6] pin to special-function 2 - MMC0 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(2));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(2));
+ }
+ }
+}
+
+void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
+
+ /* Set GPH[0:1] pins to special-function 2 - CLK and CMD */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(0), 2, S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(0), 2 , S3C_GPIO_SFN(2));
+
+ switch (width) {
+ case 8:
+ /* Set data pins GPH[6:9] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4,
+ S3C_GPIO_SFN(2));
+ case 4:
+ /* set data pins GPH[2:5] special-function 2 */
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgrange_nopull(S5P6450_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ else
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(2), 4,
+ S3C_GPIO_SFN(2));
+ default:
+ break;
+ }
+
+ /* Set GPG[6] pin to special-funtion 3 : MMC1 CDn */
+ if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
+ if (soc_is_s5p6450()) {
+ s3c_gpio_setpull(S5P6450_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6450_GPG(6), S3C_GPIO_SFN(3));
+ } else {
+ s3c_gpio_setpull(S5P6440_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S5P6440_GPG(6), S3C_GPIO_SFN(3));
+ }
+ }
+}
+
+void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set GPC[4:5] pins to special-function 3 - CLK and CMD */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPC(4), 2, S3C_GPIO_SFN(3));
+
+ /* Set data pins GPH[6:9] pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6440_GPH(6), 4, S3C_GPIO_SFN(3));
+}
+
+void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+ /* Set all the necessary GPG pins to special-function 3 */
+ s3c_gpio_cfgrange_nopull(S5P6450_GPG(7), 2 + width, S3C_GPIO_SFN(3));
+}
diff --git a/arch/arm/mach-s5p64x0/setup-spi.c b/arch/arm/mach-s5p64x0/setup-spi.c
new file mode 100644
index 0000000..e9b8412
--- /dev/null
+++ b/arch/arm/mach-s5p64x0/setup-spi.c
@@ -0,0 +1,55 @@
+/* linux/arch/arm/mach-s5p64x0/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ if (soc_is_s5p6450())
+ s3c_gpio_cfgall_range(S5P6450_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ else
+ s3c_gpio_cfgall_range(S5P6440_GPC(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index e538a4c..75a26ea 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -45,6 +45,11 @@
help
Common setup code for SDHCI gpio.
+config S5PC100_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
config MACH_SMDKC100
bool "SMDKC100"
select CPU_S5PC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index a5e6e60..291e246 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -21,12 +21,11 @@
obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S5PC100_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PC100_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PC100_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PC100_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PC100_SETUP_SPI) += setup-spi.o
# device support
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
# machine support
diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c
index 8d47709..eba721b 100644
--- a/arch/arm/mach-s5pc100/clock.c
+++ b/arch/arm/mach-s5pc100/clock.c
@@ -426,24 +426,6 @@
.enable = s5pc100_d0_2_ctrl,
.ctrlbit = (1 << 1),
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 6),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_div_d1_bus.clk,
- .enable = s5pc100_d1_0_ctrl,
- .ctrlbit = (1 << 5),
- }, {
.name = "modemif",
.parent = &clk_div_d1_bus.clk,
.enable = s5pc100_d1_0_ctrl,
@@ -673,24 +655,6 @@
.enable = s5pc100_d1_5_ctrl,
.ctrlbit = (1 << 8),
}, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.0",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 7),
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.1",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 8),
- }, {
- .name = "spi_48m",
- .devname = "s3c64xx-spi.2",
- .parent = &clk_mout_48m.clk,
- .enable = s5pc100_sclk0_ctrl,
- .ctrlbit = (1 << 9),
- }, {
.name = "mmc_48m",
.devname = "s3c-sdhci.0",
.parent = &clk_mout_48m.clk,
@@ -711,6 +675,54 @@
},
};
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 6),
+};
+
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_div_d1_bus.clk,
+ .enable = s5pc100_d1_0_ctrl,
+ .ctrlbit = (1 << 5),
+};
+
+static struct clk clk_48m_spi0 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.0",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 7),
+};
+
+static struct clk clk_48m_spi1 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.1",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 8),
+};
+
+static struct clk clk_48m_spi2 = {
+ .name = "spi_48m",
+ .devname = "s3c64xx-spi.2",
+ .parent = &clk_mout_48m.clk,
+ .enable = s5pc100_sclk0_ctrl,
+ .ctrlbit = (1 << 9),
+};
+
static struct clk clk_vclk54m = {
.name = "vclk_54m",
.rate = 54000000,
@@ -929,49 +941,6 @@
static struct clksrc_clk clksrcs[] = {
{
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .ctrlbit = (1 << 4),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .ctrlbit = (1 << 5),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.2",
- .ctrlbit = (1 << 6),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group1,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .ctrlbit = (1 << 3),
- .enable = s5pc100_sclk0_ctrl,
-
- },
- .sources = &clk_src_group2,
- .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
- .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
- }, {
- .clk = {
.name = "sclk_mixer",
.ctrlbit = (1 << 6),
.enable = s5pc100_sclk0_ctrl,
@@ -1024,39 +993,6 @@
.reg_div = { .reg = S5P_CLK_DIV3, .shift = 24, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .ctrlbit = (1 << 12),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc0,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .ctrlbit = (1 << 13),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .ctrlbit = (1 << 14),
- .enable = s5pc100_sclk1_ctrl,
-
- },
- .sources = &clk_src_mmc12,
- .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
- .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
- }, {
- .clk = {
.name = "sclk_irda",
.ctrlbit = (1 << 10),
.enable = s5pc100_sclk0_ctrl,
@@ -1098,6 +1034,89 @@
},
};
+static struct clksrc_clk clk_sclk_uart = {
+ .clk = {
+ .name = "uclk1",
+ .ctrlbit = (1 << 3),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group2,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 0, .size = 1 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .ctrlbit = (1 << 12),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc0,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 0, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .ctrlbit = (1 << 13),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .ctrlbit = (1 << 14),
+ .enable = s5pc100_sclk1_ctrl,
+ },
+ .sources = &clk_src_mmc12,
+ .reg_src = { .reg = S5P_CLK_SRC2, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV3, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .ctrlbit = (1 << 4),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .ctrlbit = (1 << 5),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 8, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi2 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.2",
+ .ctrlbit = (1 << 6),
+ .enable = s5pc100_sclk0_ctrl,
+ },
+ .sources = &clk_src_group1,
+ .reg_src = { .reg = S5P_CLK_SRC1, .shift = 12, .size = 2 },
+ .reg_div = { .reg = S5P_CLK_DIV2, .shift = 12, .size = 4 },
+};
+
/* Clock initialisation code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1127,6 +1146,25 @@
&clk_sclk_spdif,
};
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_48m_spi0,
+ &clk_48m_spi1,
+ &clk_48m_spi2,
+};
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+ &clk_sclk_spi2,
+};
+
void __init_or_cpufreq s5pc100_setup_clocks(void)
{
unsigned long xtal;
@@ -1266,6 +1304,24 @@
&clk_pcmcdclk1,
};
+static struct clk_lookup s5pc100_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_sclk_uart.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_48m_spi0),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk2", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_48m_spi1),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk2", &clk_sclk_spi1.clk),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk1", &clk_48m_spi2),
+ CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk2", &clk_sclk_spi2.clk),
+};
+
void __init s5pc100_register_clocks(void)
{
int ptr;
@@ -1277,9 +1333,16 @@
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5pc100_clk_lookup, ARRAY_SIZE(s5pc100_clk_lookup));
+
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
diff --git a/arch/arm/mach-s5pc100/dev-spi.c b/arch/arm/mach-s5pc100/dev-spi.c
deleted file mode 100644
index e5d6c4d..0000000
--- a/arch/arm/mach-s5pc100/dev-spi.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/spi-clocks.h>
-#include <mach/irqs.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-#include <plat/irqs.h>
-
-static char *spi_src_clks[] = {
- [S5PC100_SPI_SRCCLK_PCLK] = "pclk",
- [S5PC100_SPI_SRCCLK_48M] = "spi_48m",
- [S5PC100_SPI_SRCCLK_SPIBUS] = "spi_bus",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pc100_spi_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- case 1:
- s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- break;
-
- case 2:
- s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
- s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct resource s5pc100_spi0_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI0,
- .end = S5PC100_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi0_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pc100_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pc100_spi0_resource),
- .resource = s5pc100_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi0_pdata,
- },
-};
-
-static struct resource s5pc100_spi1_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI1,
- .end = S5PC100_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi1_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pc100_spi1_resource),
- .resource = s5pc100_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi1_pdata,
- },
-};
-
-static struct resource s5pc100_spi2_resource[] = {
- [0] = {
- .start = S5PC100_PA_SPI2,
- .end = S5PC100_PA_SPI2 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI2_TX,
- .end = DMACH_SPI2_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI2_RX,
- .end = DMACH_SPI2_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI2,
- .end = IRQ_SPI2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pc100_spi2_pdata = {
- .cfg_gpio = s5pc100_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 13,
- .high_speed = 1,
- .tx_st_done = 21,
-};
-
-struct platform_device s5pc100_device_spi2 = {
- .name = "s3c64xx-spi",
- .id = 2,
- .num_resources = ARRAY_SIZE(s5pc100_spi2_resource),
- .resource = s5pc100_spi2_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pc100_spi2_pdata,
- },
-};
-
-void __init s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5PC100_SPI_SRCCLK_SPIBUS) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5pc100_spi0_pdata;
- break;
- case 1:
- pd = &s5pc100_spi1_pdata;
- break;
- case 2:
- pd = &s5pc100_spi2_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c
index 065a087..c841f4d3 100644
--- a/arch/arm/mach-s5pc100/dma.c
+++ b/arch/arm/mach-s5pc100/dma.c
@@ -35,100 +35,42 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_EXTERNAL,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_SPDIF,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_HSI_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_HSI_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_EXTERNAL,
+ DMACH_PWM,
+ DMACH_SPDIF,
+ DMACH_HSI_RX,
+ DMACH_HSI_TX,
};
struct dma_pl330_platdata s5pc100_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device s5pc100_device_pdma0 = {
@@ -147,98 +89,42 @@
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[30] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_IRDA,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- },
+u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_IRDA,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_SPI2_RX,
+ DMACH_SPI2_TX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
};
struct dma_pl330_platdata s5pc100_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device s5pc100_device_pdma1 = {
@@ -259,7 +145,12 @@
static int __init s5pc100_dma_init(void)
{
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask);
amba_device_register(&s5pc100_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index d2eb475..2870f12 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -97,6 +97,8 @@
#define IRQ_SDMFIQ S5P_IRQ_VIC2(31)
#define IRQ_VIC_END S5P_IRQ_VIC2(31)
+#define IRQ_TIMER_BASE (11)
+
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index ccbe6b7..54bc4f8 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -100,6 +100,9 @@
#define S3C_PA_USB_HSOTG S5PC100_PA_USB_HSOTG
#define S3C_PA_USB_HSPHY S5PC100_PA_USB_HSPHY
#define S3C_PA_WDT S5PC100_PA_WATCHDOG
+#define S3C_PA_SPI0 S5PC100_PA_SPI0
+#define S3C_PA_SPI1 S5PC100_PA_SPI1
+#define S3C_PA_SPI2 S5PC100_PA_SPI2
#define S5P_PA_CHIPID S5PC100_PA_CHIPID
#define S5P_PA_FIMC0 S5PC100_PA_FIMC0
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
deleted file mode 100644
index 6418c6e..0000000
--- a/arch/arm/mach-s5pc100/setup-sdhci.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
- *
- * Copyright 2008 Samsung Electronics
- *
- * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * Based on mach-s3c6410/setup-sdhci.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s5pc100_hsmmc_clksrcs[4] = {
- [0] = "hsmmc", /* HCLK */
- /* [1] = "hsmmc", - duplicate HCLK entry */
- [2] = "sclk_mmc", /* mmc_bus */
- /* [3] = "48m", - note not successfully used yet */
-};
diff --git a/arch/arm/mach-s5pc100/setup-spi.c b/arch/arm/mach-s5pc100/setup-spi.c
new file mode 100644
index 0000000..431a6f7
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-spi.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(0), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgall_range(S5PC100_GPB(4), 3,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 13,
+ .high_speed = 1,
+ .tx_st_done = 21,
+};
+
+int s3c64xx_spi2_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PC100_GPG3(0), S3C_GPIO_SFN(3));
+ s3c_gpio_setpull(S5PC100_GPG3(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PC100_GPB(2), 2,
+ S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 646057a..2cdc42e 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -60,6 +60,11 @@
help
Common setup code for the camera interfaces.
+config S5PV210_SETUP_SPI
+ bool
+ help
+ Common setup code for SPI GPIO configurations.
+
menu "S5PC110 Machines"
config MACH_AQUILA
diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile
index 009fbe5..471df5d 100644
--- a/arch/arm/mach-s5pv210/Makefile
+++ b/arch/arm/mach-s5pv210/Makefile
@@ -27,7 +27,6 @@
# device support
obj-y += dev-audio.o
-obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S5PV210_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S5PV210_SETUP_FIMC) += setup-fimc.o
@@ -35,5 +34,5 @@
obj-$(CONFIG_S5PV210_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_S5PV210_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S5PV210_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_S5PV210_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_S5PV210_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
+obj-$(CONFIG_S5PV210_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 4c5ac7a..cead513 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -399,30 +399,6 @@
.enable = s5pv210_clk_ip1_ctrl,
.ctrlbit = (1<<25),
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.0",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<16),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<17),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.2",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<18),
- }, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.3",
- .parent = &clk_hclk_psys.clk,
- .enable = s5pv210_clk_ip2_ctrl,
- .ctrlbit = (1<<19),
- }, {
.name = "systimer",
.parent = &clk_pclk_psys.clk,
.enable = s5pv210_clk_ip3_ctrl,
@@ -559,6 +535,38 @@
},
};
+static struct clk clk_hsmmc0 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<16),
+};
+
+static struct clk clk_hsmmc1 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<17),
+};
+
+static struct clk clk_hsmmc2 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<18),
+};
+
+static struct clk clk_hsmmc3 = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &clk_hclk_psys.clk,
+ .enable = s5pv210_clk_ip2_ctrl,
+ .ctrlbit = (1<<19),
+};
+
static struct clk *clkset_uart_list[] = {
[6] = &clk_mout_mpll.clk,
[7] = &clk_mout_epll.clk,
@@ -809,46 +817,6 @@
.reg_div = { .reg = S5P_CLK_DIV6, .shift = 12, .size = 3 },
}, {
.clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 12),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 13),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.2",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 14),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
- }, {
- .clk = {
- .name = "uclk1",
- .devname = "s5pv210-uart.3",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 15),
- },
- .sources = &clkset_uart,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
- }, {
- .clk = {
.name = "sclk_fimc",
.devname = "s5pv210-fimc.0",
.enable = s5pv210_clk_mask1_ctrl,
@@ -906,46 +874,6 @@
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 4 },
}, {
.clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 8),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 9),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.2",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 10),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_mmc",
- .devname = "s3c-sdhci.3",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 11),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
- }, {
- .clk = {
.name = "sclk_mfc",
.devname = "s5p-mfc",
.enable = s5pv210_clk_ip0_ctrl,
@@ -983,26 +911,6 @@
.reg_div = { .reg = S5P_CLK_DIV1, .shift = 28, .size = 4 },
}, {
.clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.0",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 16),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
- }, {
- .clk = {
- .name = "sclk_spi",
- .devname = "s3c64xx-spi.1",
- .enable = s5pv210_clk_mask0_ctrl,
- .ctrlbit = (1 << 17),
- },
- .sources = &clkset_group2,
- .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
- .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
- }, {
- .clk = {
.name = "sclk_pwi",
.enable = s5pv210_clk_mask0_ctrl,
.ctrlbit = (1 << 29),
@@ -1022,6 +930,147 @@
},
};
+static struct clksrc_clk clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 16, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 13),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 20, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 20, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.2",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 14),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 24, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 24, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "s5pv210-uart.3",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 15),
+ },
+ .sources = &clkset_uart,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 28, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 9),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 10),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 8, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 11),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC4, .shift = 12, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV4, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk clk_sclk_spi0 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.0",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 0, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 0, .size = 4 },
+ };
+
+static struct clksrc_clk clk_sclk_spi1 = {
+ .clk = {
+ .name = "sclk_spi",
+ .devname = "s3c64xx-spi.1",
+ .enable = s5pv210_clk_mask0_ctrl,
+ .ctrlbit = (1 << 17),
+ },
+ .sources = &clkset_group2,
+ .reg_src = { .reg = S5P_CLK_SRC5, .shift = 4, .size = 4 },
+ .reg_div = { .reg = S5P_CLK_DIV5, .shift = 4, .size = 4 },
+ };
+
+
+static struct clksrc_clk *clksrc_cdev[] = {
+ &clk_sclk_uart0,
+ &clk_sclk_uart1,
+ &clk_sclk_uart2,
+ &clk_sclk_uart3,
+ &clk_sclk_mmc0,
+ &clk_sclk_mmc1,
+ &clk_sclk_mmc2,
+ &clk_sclk_mmc3,
+ &clk_sclk_spi0,
+ &clk_sclk_spi1,
+};
+
+static struct clk *clk_cdev[] = {
+ &clk_hsmmc0,
+ &clk_hsmmc1,
+ &clk_hsmmc2,
+ &clk_hsmmc3,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *sysclks[] = {
&clk_mout_apll,
@@ -1261,6 +1310,25 @@
&clk_pcmcdclk2,
};
+static struct clk_lookup s5pv210_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
+ CLKDEV_INIT("s5pv210-uart.0", "clk_uart_baud1", &clk_sclk_uart0.clk),
+ CLKDEV_INIT("s5pv210-uart.1", "clk_uart_baud1", &clk_sclk_uart1.clk),
+ CLKDEV_INIT("s5pv210-uart.2", "clk_uart_baud1", &clk_sclk_uart2.clk),
+ CLKDEV_INIT("s5pv210-uart.3", "clk_uart_baud1", &clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &clk_hsmmc0),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &clk_hsmmc1),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.0", &clk_hsmmc2),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.0", &clk_hsmmc3),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &clk_sclk_mmc3.clk),
+ CLKDEV_INIT(NULL, "spi_busclk0", &clk_p),
+ CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk1", &clk_sclk_spi0.clk),
+ CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk1", &clk_sclk_spi1.clk),
+};
+
void __init s5pv210_register_clocks(void)
{
int ptr;
@@ -1273,11 +1341,19 @@
for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++)
s3c_register_clksrc(sclk_tv[ptr], 1);
+ for (ptr = 0; ptr < ARRAY_SIZE(clksrc_cdev); ptr++)
+ s3c_register_clksrc(clksrc_cdev[ptr], 1);
+
s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s5pv210_clk_lookup, ARRAY_SIZE(s5pv210_clk_lookup));
+
+ s3c24xx_register_clocks(clk_cdev, ARRAY_SIZE(clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(clk_cdev); ptr++)
+ s3c_disable_clocks(clk_cdev[ptr], 1);
s3c24xx_register_clock(&dummy_apb_pclk);
s3c_pwmclk_init();
diff --git a/arch/arm/mach-s5pv210/dev-spi.c b/arch/arm/mach-s5pv210/dev-spi.c
deleted file mode 100644
index eaf9a7b..0000000
--- a/arch/arm/mach-s5pv210/dev-spi.c
+++ /dev/null
@@ -1,175 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/dev-spi.c
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-
-#include <mach/dma.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/spi-clocks.h>
-
-#include <plat/s3c64xx-spi.h>
-#include <plat/gpio-cfg.h>
-
-static char *spi_src_clks[] = {
- [S5PV210_SPI_SRCCLK_PCLK] = "pclk",
- [S5PV210_SPI_SRCCLK_SCLK] = "sclk_spi",
-};
-
-/* SPI Controller platform_devices */
-
-/* Since we emulate multi-cs capability, we do not touch the CS.
- * The emulated CS is toggled by board specific mechanism, as it can
- * be either some immediate GPIO or some signal out of some other
- * chip in between ... or some yet another way.
- * We simply do not assume anything about CS.
- */
-static int s5pv210_spi_cfg_gpio(struct platform_device *pdev)
-{
- unsigned int base;
-
- switch (pdev->id) {
- case 0:
- base = S5PV210_GPB(0);
- break;
-
- case 1:
- base = S5PV210_GPB(4);
- break;
-
- default:
- dev_err(&pdev->dev, "Invalid SPI Controller number!");
- return -EINVAL;
- }
-
- s3c_gpio_cfgall_range(base, 3,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-
- return 0;
-}
-
-static struct resource s5pv210_spi0_resource[] = {
- [0] = {
- .start = S5PV210_PA_SPI0,
- .end = S5PV210_PA_SPI0 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI0_TX,
- .end = DMACH_SPI0_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI0_RX,
- .end = DMACH_SPI0_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI0,
- .end = IRQ_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pv210_spi0_pdata = {
- .cfg_gpio = s5pv210_spi_cfg_gpio,
- .fifo_lvl_mask = 0x1ff,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device s5pv210_device_spi0 = {
- .name = "s3c64xx-spi",
- .id = 0,
- .num_resources = ARRAY_SIZE(s5pv210_spi0_resource),
- .resource = s5pv210_spi0_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_spi0_pdata,
- },
-};
-
-static struct resource s5pv210_spi1_resource[] = {
- [0] = {
- .start = S5PV210_PA_SPI1,
- .end = S5PV210_PA_SPI1 + 0x100 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = DMACH_SPI1_TX,
- .end = DMACH_SPI1_TX,
- .flags = IORESOURCE_DMA,
- },
- [2] = {
- .start = DMACH_SPI1_RX,
- .end = DMACH_SPI1_RX,
- .flags = IORESOURCE_DMA,
- },
- [3] = {
- .start = IRQ_SPI1,
- .end = IRQ_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct s3c64xx_spi_info s5pv210_spi1_pdata = {
- .cfg_gpio = s5pv210_spi_cfg_gpio,
- .fifo_lvl_mask = 0x7f,
- .rx_lvl_offset = 15,
- .high_speed = 1,
- .tx_st_done = 25,
-};
-
-struct platform_device s5pv210_device_spi1 = {
- .name = "s3c64xx-spi",
- .id = 1,
- .num_resources = ARRAY_SIZE(s5pv210_spi1_resource),
- .resource = s5pv210_spi1_resource,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &s5pv210_spi1_pdata,
- },
-};
-
-void __init s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
-{
- struct s3c64xx_spi_info *pd;
-
- /* Reject invalid configuration */
- if (!num_cs || src_clk_nr < 0
- || src_clk_nr > S5PV210_SPI_SRCCLK_SCLK) {
- printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__);
- return;
- }
-
- switch (cntrlr) {
- case 0:
- pd = &s5pv210_spi0_pdata;
- break;
- case 1:
- pd = &s5pv210_spi1_pdata;
- break;
- default:
- printk(KERN_ERR "%s: Invalid SPI controller(%d)\n",
- __func__, cntrlr);
- return;
- }
-
- pd->num_cs = num_cs;
- pd->src_clk_nr = src_clk_nr;
- pd->src_clk_name = spi_src_clks[src_clk_nr];
-}
diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c
index 86b749c..a6113e0 100644
--- a/arch/arm/mach-s5pv210/dma.c
+++ b/arch/arm/mach-s5pv210/dma.c
@@ -35,90 +35,40 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
-struct dma_pl330_peri pdma0_peri[28] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_AC97_MICIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMIN,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_AC97_PCMOUT,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PWM,
- }, {
- .peri_id = (u8)DMACH_SPDIF,
- .rqtype = MEMTODEV,
- },
+u8 pdma0_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_AC97_MICIN,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_PCMOUT,
+ DMACH_MAX,
+ DMACH_PWM,
+ DMACH_SPDIF,
};
struct dma_pl330_platdata s5pv210_pdma0_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma0_peri),
- .peri = pdma0_peri,
+ .peri_id = pdma0_peri,
};
struct amba_device s5pv210_device_pdma0 = {
@@ -137,102 +87,44 @@
.periphid = 0x00041330,
};
-struct dma_pl330_peri pdma1_peri[32] = {
- {
- .peri_id = (u8)DMACH_UART0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_UART3_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_UART3_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_I2S0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S0S_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_I2S2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_I2S2_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_SPI1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_SPI1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_MAX,
- }, {
- .peri_id = (u8)DMACH_PCM0_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM0_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_PCM1_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM1_TX,
- .rqtype = MEMTODEV,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ0,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ1,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ2,
- }, {
- .peri_id = (u8)DMACH_MSM_REQ3,
- }, {
- .peri_id = (u8)DMACH_PCM2_RX,
- .rqtype = DEVTOMEM,
- }, {
- .peri_id = (u8)DMACH_PCM2_TX,
- .rqtype = MEMTODEV,
- },
+u8 pdma1_peri[] = {
+ DMACH_UART0_RX,
+ DMACH_UART0_TX,
+ DMACH_UART1_RX,
+ DMACH_UART1_TX,
+ DMACH_UART2_RX,
+ DMACH_UART2_TX,
+ DMACH_UART3_RX,
+ DMACH_UART3_TX,
+ DMACH_MAX,
+ DMACH_I2S0_RX,
+ DMACH_I2S0_TX,
+ DMACH_I2S0S_TX,
+ DMACH_I2S1_RX,
+ DMACH_I2S1_TX,
+ DMACH_I2S2_RX,
+ DMACH_I2S2_TX,
+ DMACH_SPI0_RX,
+ DMACH_SPI0_TX,
+ DMACH_SPI1_RX,
+ DMACH_SPI1_TX,
+ DMACH_MAX,
+ DMACH_MAX,
+ DMACH_PCM0_RX,
+ DMACH_PCM0_TX,
+ DMACH_PCM1_RX,
+ DMACH_PCM1_TX,
+ DMACH_MSM_REQ0,
+ DMACH_MSM_REQ1,
+ DMACH_MSM_REQ2,
+ DMACH_MSM_REQ3,
+ DMACH_PCM2_RX,
+ DMACH_PCM2_TX,
};
struct dma_pl330_platdata s5pv210_pdma1_pdata = {
.nr_valid_peri = ARRAY_SIZE(pdma1_peri),
- .peri = pdma1_peri,
+ .peri_id = pdma1_peri,
};
struct amba_device s5pv210_device_pdma1 = {
@@ -253,7 +145,12 @@
static int __init s5pv210_dma_init(void)
{
+ dma_cap_set(DMA_SLAVE, s5pv210_pdma0_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pv210_pdma0_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma0, &iomem_resource);
+
+ dma_cap_set(DMA_SLAVE, s5pv210_pdma1_pdata.cap_mask);
+ dma_cap_set(DMA_CYCLIC, s5pv210_pdma1_pdata.cap_mask);
amba_device_register(&s5pv210_device_pdma1, &iomem_resource);
return 0;
diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h
index 5e0de3a..e777e01 100644
--- a/arch/arm/mach-s5pv210/include/mach/irqs.h
+++ b/arch/arm/mach-s5pv210/include/mach/irqs.h
@@ -118,6 +118,8 @@
#define IRQ_MDNIE3 S5P_IRQ_VIC3(8)
#define IRQ_VIC_END S5P_IRQ_VIC3(31)
+#define IRQ_TIMER_BASE (11)
+
#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0))
#define S5P_EINT_BASE2 (IRQ_VIC_END + 1)
diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h
index 7ff609f..89c34b8 100644
--- a/arch/arm/mach-s5pv210/include/mach/map.h
+++ b/arch/arm/mach-s5pv210/include/mach/map.h
@@ -109,6 +109,8 @@
#define S3C_PA_RTC S5PV210_PA_RTC
#define S3C_PA_USB_HSOTG S5PV210_PA_HSOTG
#define S3C_PA_WDT S5PV210_PA_WATCHDOG
+#define S3C_PA_SPI0 S5PV210_PA_SPI0
+#define S3C_PA_SPI1 S5PV210_PA_SPI1
#define S5P_PA_CHIPID S5PV210_PA_CHIPID
#define S5P_PA_FIMC0 S5PV210_PA_FIMC0
diff --git a/arch/arm/mach-s5pv210/init.c b/arch/arm/mach-s5pv210/init.c
index 4865ae2..468a5f8 100644
--- a/arch/arm/mach-s5pv210/init.c
+++ b/arch/arm/mach-s5pv210/init.c
@@ -18,27 +18,8 @@
#include <plat/s5pv210.h>
#include <plat/regs-serial.h>
-static struct s3c24xx_uart_clksrc s5pv210_serial_clocks[] = {
- [0] = {
- .name = "pclk",
- .divisor = 1,
- .min_baud = 0,
- .max_baud = 0,
- },
-};
-
/* uart registration process */
void __init s5pv210_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
- if (!tcfg->clocks) {
- tcfg->clocks = s5pv210_serial_clocks;
- tcfg->clocks_size = ARRAY_SIZE(s5pv210_serial_clocks);
- }
- }
-
s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);
}
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index a9106c3..8662ef6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -273,6 +273,7 @@
static struct platform_pwm_backlight_data smdkv210_bl_data = {
.pwm_id = 3,
+ .pwm_period_ns = 1000,
};
static void __init smdkv210_map_io(void)
diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c
deleted file mode 100644
index 6b8ccc4..0000000
--- a/arch/arm/mach-s5pv210/setup-sdhci.c
+++ /dev/null
@@ -1,22 +0,0 @@
-/* linux/arch/arm/mach-s5pv210/setup-sdhci.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * S5PV210 - Helper functions for settign up SDHCI device(s) (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/types.h>
-
-/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
-
-char *s5pv210_hsmmc_clksrcs[4] = {
- [0] = "hsmmc", /* HCLK */
- /* [1] = "hsmmc", - duplicate HCLK entry */
- [2] = "sclk_mmc", /* mmc_bus */
- /* [3] = NULL, - reserved */
-};
diff --git a/arch/arm/mach-s5pv210/setup-spi.c b/arch/arm/mach-s5pv210/setup-spi.c
new file mode 100644
index 0000000..f43c504
--- /dev/null
+++ b/arch/arm/mach-s5pv210/setup-spi.c
@@ -0,0 +1,51 @@
+/* linux/arch/arm/mach-s5pv210/setup-spi.c
+ *
+ * Copyright (C) 2011 Samsung Electronics Ltd.
+ * http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/s3c64xx-spi.h>
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+struct s3c64xx_spi_info s3c64xx_spi0_pdata = {
+ .fifo_lvl_mask = 0x1ff,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi0_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPB(0), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPB(0), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPB(2), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+struct s3c64xx_spi_info s3c64xx_spi1_pdata = {
+ .fifo_lvl_mask = 0x7f,
+ .rx_lvl_offset = 15,
+ .high_speed = 1,
+ .tx_st_done = 25,
+};
+
+int s3c64xx_spi1_cfg_gpio(struct platform_device *dev)
+{
+ s3c_gpio_cfgpin(S5PV210_GPB(4), S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(S5PV210_GPB(4), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgall_range(S5PV210_GPB(6), 2,
+ S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
+ return 0;
+}
+#endif
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index 74aac96..adbff70 100644
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -17,6 +17,7 @@
* the CPU clock speed on the fly.
*/
+#include <linux/module.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 42d74ea..845de59 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -32,6 +32,9 @@
#define MX3_PWMSAR 0x0C /* PWM Sample Register */
#define MX3_PWMPR 0x10 /* PWM Period Register */
#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR_DBGEN (1 << 22)
#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
#define MX3_PWMCR_EN (1 << 0)
@@ -77,7 +80,9 @@
writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
- cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+ cr = MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
if (cpu_is_mx25())
cr |= MX3_PWMCR_CLKSRC_IPG;
diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 30e1071..6e5d3a0 100644
--- a/arch/arm/plat-omap/include/plat/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -357,7 +357,7 @@
#define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69
#define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70
#define INT_35XX_USBOTG_IRQ 71
-#define INT_35XX_UART4 84
+#define INT_35XX_UART4_IRQ 84
#define INT_35XX_CCDC_VD0_IRQ 88
#define INT_35XX_CCDC_VD1_IRQ 92
#define INT_35XX_CCDC_VD2_IRQ 93
diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 94cf70a..f75946c 100644
--- a/arch/arm/plat-omap/include/plat/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -96,6 +96,7 @@
*/
u8 wires; /* Used for the MMC driver on omap1 and 2420 */
u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
/*
* nomux means "standard" muxing is wrong on this board, and
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 1ab9fd6..865a2ba 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -44,6 +44,7 @@
#define OMAP3_UART2_BASE OMAP2_UART2_BASE
#define OMAP3_UART3_BASE 0x49020000
#define OMAP3_UART4_BASE 0x49042000 /* Only on 36xx */
+#define OMAP3_UART4_AM35XX_BASE 0x4809E000 /* Only on AM35xx */
/* OMAP4 serial ports */
#define OMAP4_UART1_BASE OMAP2_UART1_BASE
diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index 17d3c93..2b66dc26 100644
--- a/arch/arm/plat-omap/include/plat/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -100,9 +100,6 @@
extern void usbhs_init(const struct usbhs_omap_board_data *pdata);
-extern int omap_usbhs_enable(struct device *dev);
-extern void omap_usbhs_disable(struct device *dev);
-
extern int omap4430_phy_power(struct device *dev, int ID, int on);
extern int omap4430_phy_set_clk(struct device *dev, int on);
extern int omap4430_phy_init(struct device *dev);
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
deleted file mode 100644
index b6390be..0000000
--- a/arch/arm/plat-pxa/include/plat/gpio-pxa.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef __PLAT_PXA_GPIO_H
-#define __PLAT_PXA_GPIO_H
-
-struct irq_data;
-
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- * GPLR GPDR GPSR GPCR GRER GFER GEDR
- * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
- * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
- * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
- *
- * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
- * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
- * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
- *
- * NOTE:
- * BANK 3 is only available on PXA27x and later processors.
- * BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n) (GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET 0x00
-#define GPDR_OFFSET 0x0C
-#define GPSR_OFFSET 0x18
-#define GPCR_OFFSET 0x24
-#define GRER_OFFSET 0x30
-#define GFER_OFFSET 0x3C
-#define GEDR_OFFSET 0x48
-
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
-
-#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
deleted file mode 100644
index 258f772..0000000
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#define __ARM_GPIOLIB_COMPLEX
-
-/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
-#include <mach/gpio-pxa.h>
-
-static inline int gpio_get_value(unsigned gpio)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
- return GPLR(gpio) & GPIO_bit(gpio);
- else
- return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
- if (value)
- GPSR(gpio) = GPIO_bit(gpio);
- else
- GPCR(gpio) = GPIO_bit(gpio);
- } else
- __gpio_set_value(gpio, value);
-}
-
-#define gpio_cansleep __gpio_cansleep
-
-#endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c
index 5a21b15..95e6819 100644
--- a/arch/arm/plat-s3c24xx/s3c2443-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c
@@ -297,13 +297,6 @@
static struct clksrc_clk clksrc_clks[] = {
{
- /* ART baud-rate clock sourced from esysclk via a divisor */
- .clk = {
- .name = "uartclk",
- .parent = &clk_esysclk.clk,
- },
- .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
- }, {
/* camera interface bus-clock, divided down from esysclk */
.clk = {
.name = "camif-upll", /* same as 2440 name */
@@ -323,6 +316,15 @@
},
};
+static struct clksrc_clk clk_esys_uart = {
+ /* ART baud-rate clock sourced from esysclk via a divisor */
+ .clk = {
+ .name = "uartclk",
+ .parent = &clk_esysclk.clk,
+ },
+ .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
+};
+
static struct clk clk_i2s_ext = {
.name = "i2s-ext",
};
@@ -425,12 +427,6 @@
.enable = s3c2443_clkcon_enable_h,
.ctrlbit = S3C2443_HCLKCON_DMA5,
}, {
- .name = "hsmmc",
- .devname = "s3c-sdhci.1",
- .parent = &clk_h,
- .enable = s3c2443_clkcon_enable_h,
- .ctrlbit = S3C2443_HCLKCON_HSMMC,
- }, {
.name = "gpio",
.parent = &clk_p,
.enable = s3c2443_clkcon_enable_p,
@@ -512,6 +508,14 @@
}
};
+static struct clk hsmmc1_clk = {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &clk_h,
+ .enable = s3c2443_clkcon_enable_h,
+ .ctrlbit = S3C2443_HCLKCON_HSMMC,
+};
+
static inline unsigned long s3c2443_get_hdiv(unsigned long clkcon0)
{
clkcon0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
@@ -577,6 +581,7 @@
&clk_epll,
&clk_usb_bus,
&clk_armdiv,
+ &hsmmc1_clk,
};
static struct clksrc_clk *clksrcs[] __initdata = {
@@ -589,6 +594,13 @@
&clk_arm,
};
+static struct clk_lookup s3c2443_clk_lookup[] = {
+ CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
+ CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
+ CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
+};
+
void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
unsigned int *divs, int nr_divs,
int divmask)
@@ -618,6 +630,7 @@
/* See s3c2443/etc notes on disabling clocks at init time */
s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+ clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
s3c2443_common_setup_clocks(get_mpll);
}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 313eb26..160eea1 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -226,11 +226,23 @@
help
Compile in platform device definitions for IDE
-config S3C64XX_DEV_SPI
+config S3C64XX_DEV_SPI0
bool
help
Compile in platform device definitions for S3C64XX's type
- SPI controllers.
+ SPI controller 0
+
+config S3C64XX_DEV_SPI1
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 1
+
+config S3C64XX_DEV_SPI2
+ bool
+ help
+ Compile in platform device definitions for S3C64XX's type
+ SPI controller 2
config SAMSUNG_DEV_TS
bool
diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c
index e657305..a976c02 100644
--- a/arch/arm/plat-samsung/dev-backlight.c
+++ b/arch/arm/plat-samsung/dev-backlight.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/pwm_backlight.h>
-#include <linux/slab.h>
#include <plat/devs.h>
#include <plat/gpio-cfg.h>
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 4ca8b571..de0d88d 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -61,6 +61,7 @@
#include <plat/regs-iic.h>
#include <plat/regs-serial.h>
#include <plat/regs-spi.h>
+#include <plat/s3c64xx-spi.h>
static u64 samsung_device_dma_mask = DMA_BIT_MASK(32);
@@ -1461,3 +1462,129 @@
.resource = s3c_wdt_resource,
};
#endif /* CONFIG_S3C_DEV_WDT */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI0
+static struct resource s3c64xx_spi0_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI0, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI0_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI0_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI0),
+};
+
+struct platform_device s3c64xx_device_spi0 = {
+ .name = "s3c64xx-spi",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi0_resource),
+ .resource = s3c64xx_spi0_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi0_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi0);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI0 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI1
+static struct resource s3c64xx_spi1_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI1, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI1_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI1_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI1),
+};
+
+struct platform_device s3c64xx_device_spi1 = {
+ .name = "s3c64xx-spi",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi1_resource),
+ .resource = s3c64xx_spi1_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi1_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi1);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI1 */
+
+#ifdef CONFIG_S3C64XX_DEV_SPI2
+static struct resource s3c64xx_spi2_resource[] = {
+ [0] = DEFINE_RES_MEM(S3C_PA_SPI2, SZ_256),
+ [1] = DEFINE_RES_DMA(DMACH_SPI2_TX),
+ [2] = DEFINE_RES_DMA(DMACH_SPI2_RX),
+ [3] = DEFINE_RES_IRQ(IRQ_SPI2),
+};
+
+struct platform_device s3c64xx_device_spi2 = {
+ .name = "s3c64xx-spi",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(s3c64xx_spi2_resource),
+ .resource = s3c64xx_spi2_resource,
+ .dev = {
+ .dma_mask = &samsung_device_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+void __init s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs)
+{
+ if (!pd) {
+ pr_err("%s:Need to pass platform data\n", __func__);
+ return;
+ }
+
+ /* Reject invalid configuration */
+ if (!num_cs || src_clk_nr < 0) {
+ pr_err("%s: Invalid SPI configuration\n", __func__);
+ return;
+ }
+
+ pd->num_cs = num_cs;
+ pd->src_clk_nr = src_clk_nr;
+ if (!pd->cfg_gpio)
+ pd->cfg_gpio = s3c64xx_spi2_cfg_gpio;
+
+ s3c_set_platdata(pd, sizeof(*pd), &s3c64xx_device_spi2);
+}
+#endif /* CONFIG_S3C64XX_DEV_SPI2 */
diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c
index 93a994a..2cded87 100644
--- a/arch/arm/plat-samsung/dma-ops.c
+++ b/arch/arm/plat-samsung/dma-ops.c
@@ -18,23 +18,24 @@
#include <mach/dma.h>
-static inline bool pl330_filter(struct dma_chan *chan, void *param)
-{
- struct dma_pl330_peri *peri = chan->private;
- return peri->peri_id == (unsigned)param;
-}
-
static unsigned samsung_dmadev_request(enum dma_ch dma_ch,
struct samsung_dma_info *info)
{
struct dma_chan *chan;
dma_cap_mask_t mask;
struct dma_slave_config slave_config;
+ void *filter_param;
dma_cap_zero(mask);
dma_cap_set(info->cap, mask);
- chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch);
+ /*
+ * If a dma channel property of a device node from device tree is
+ * specified, use that as the fliter parameter.
+ */
+ filter_param = (dma_ch == DMACH_DT_PROP) ? (void *)info->dt_dmach_prop :
+ (void *)dma_ch;
+ chan = dma_request_channel(mask, pl330_filter, filter_param);
if (info->direction == DMA_FROM_DEVICE) {
memset(&slave_config, 0, sizeof(struct dma_slave_config));
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index ab633c9..4214ea0 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -39,6 +39,7 @@
extern struct platform_device s3c64xx_device_pcm1;
extern struct platform_device s3c64xx_device_spi0;
extern struct platform_device s3c64xx_device_spi1;
+extern struct platform_device s3c64xx_device_spi2;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_cfcon;
@@ -98,8 +99,6 @@
extern struct platform_device s5p6450_device_iis2;
extern struct platform_device s5p6450_device_pcm0;
-extern struct platform_device s5p64x0_device_spi0;
-extern struct platform_device s5p64x0_device_spi1;
extern struct platform_device s5pc100_device_ac97;
extern struct platform_device s5pc100_device_iis0;
@@ -108,9 +107,6 @@
extern struct platform_device s5pc100_device_pcm0;
extern struct platform_device s5pc100_device_pcm1;
extern struct platform_device s5pc100_device_spdif;
-extern struct platform_device s5pc100_device_spi0;
-extern struct platform_device s5pc100_device_spi1;
-extern struct platform_device s5pc100_device_spi2;
extern struct platform_device s5pv210_device_ac97;
extern struct platform_device s5pv210_device_iis0;
@@ -120,8 +116,6 @@
extern struct platform_device s5pv210_device_pcm1;
extern struct platform_device s5pv210_device_pcm2;
extern struct platform_device s5pv210_device_spdif;
-extern struct platform_device s5pv210_device_spi0;
-extern struct platform_device s5pv210_device_spi1;
extern struct platform_device exynos4_device_ac97;
extern struct platform_device exynos4_device_ahci;
@@ -129,6 +123,7 @@
extern struct platform_device exynos4_device_i2s0;
extern struct platform_device exynos4_device_i2s1;
extern struct platform_device exynos4_device_i2s2;
+extern struct platform_device exynos4_device_ohci;
extern struct platform_device exynos4_device_pcm0;
extern struct platform_device exynos4_device_pcm1;
extern struct platform_device exynos4_device_pcm2;
diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h
index 4c1a363..22eafc3 100644
--- a/arch/arm/plat-samsung/include/plat/dma-ops.h
+++ b/arch/arm/plat-samsung/include/plat/dma-ops.h
@@ -31,6 +31,7 @@
enum dma_slave_buswidth width;
dma_addr_t fifo;
struct s3c2410_dma_client *client;
+ struct property *dt_dmach_prop;
};
struct samsung_dma_ops {
diff --git a/arch/arm/plat-samsung/include/plat/dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h
index 2e55e59..c5eaad5 100644
--- a/arch/arm/plat-samsung/include/plat/dma-pl330.h
+++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h
@@ -21,7 +21,8 @@
* use these just as IDs.
*/
enum dma_ch {
- DMACH_UART0_RX,
+ DMACH_DT_PROP = -1,
+ DMACH_UART0_RX = 0,
DMACH_UART0_TX,
DMACH_UART1_RX,
DMACH_UART1_TX,
diff --git a/arch/arm/plat-samsung/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h
index 08d1a7e..df46b77 100644
--- a/arch/arm/plat-samsung/include/plat/irqs.h
+++ b/arch/arm/plat-samsung/include/plat/irqs.h
@@ -44,13 +44,14 @@
#define S5P_IRQ_VIC2(x) (S5P_VIC2_BASE + (x))
#define S5P_IRQ_VIC3(x) (S5P_VIC3_BASE + (x))
-#define S5P_TIMER_IRQ(x) (11 + (x))
+#define S5P_TIMER_IRQ(x) (IRQ_TIMER_BASE + (x))
#define IRQ_TIMER0 S5P_TIMER_IRQ(0)
#define IRQ_TIMER1 S5P_TIMER_IRQ(1)
#define IRQ_TIMER2 S5P_TIMER_IRQ(2)
#define IRQ_TIMER3 S5P_TIMER_IRQ(3)
#define IRQ_TIMER4 S5P_TIMER_IRQ(4)
+#define IRQ_TIMER_COUNT (5)
#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \
: ((x) - 16 + S5P_EINT_BASE2))
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index 7207348..29c26a8 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -71,6 +71,7 @@
#define S3C2410_LCON_IRM (1<<6)
#define S3C2440_UCON_CLKMASK (3<<10)
+#define S3C2440_UCON_CLKSHIFT (10)
#define S3C2440_UCON_PCLK (0<<10)
#define S3C2440_UCON_UCLK (1<<10)
#define S3C2440_UCON_PCLK2 (2<<10)
@@ -78,6 +79,7 @@
#define S3C2443_UCON_EPLL (3<<10)
#define S3C6400_UCON_CLKMASK (3<<10)
+#define S3C6400_UCON_CLKSHIFT (10)
#define S3C6400_UCON_PCLK (0<<10)
#define S3C6400_UCON_PCLK2 (2<<10)
#define S3C6400_UCON_UCLK0 (1<<10)
@@ -90,11 +92,14 @@
#define S3C2440_UCON_DIVSHIFT (12)
#define S3C2412_UCON_CLKMASK (3<<10)
+#define S3C2412_UCON_CLKSHIFT (10)
#define S3C2412_UCON_UCLK (1<<10)
#define S3C2412_UCON_USYSCLK (3<<10)
#define S3C2412_UCON_PCLK (0<<10)
#define S3C2412_UCON_PCLK2 (2<<10)
+#define S3C2410_UCON_CLKMASK (1 << 10)
+#define S3C2410_UCON_CLKSHIFT (10)
#define S3C2410_UCON_UCLK (1<<10)
#define S3C2410_UCON_SBREAK (1<<4)
@@ -193,6 +198,7 @@
/* Following are specific to S5PV210 */
#define S5PV210_UCON_CLKMASK (1<<10)
+#define S5PV210_UCON_CLKSHIFT (10)
#define S5PV210_UCON_PCLK (0<<10)
#define S5PV210_UCON_UCLK (1<<10)
@@ -221,30 +227,25 @@
#define S5PV210_UFSTAT_RXMASK (255<<0)
#define S5PV210_UFSTAT_RXSHIFT (0)
-#define NO_NEED_CHECK_CLKSRC 1
+#define S3C2410_UCON_CLKSEL0 (1 << 0)
+#define S3C2410_UCON_CLKSEL1 (1 << 1)
+#define S3C2410_UCON_CLKSEL2 (1 << 2)
+#define S3C2410_UCON_CLKSEL3 (1 << 3)
+
+/* Default values for s5pv210 UCON and UFCON uart registers */
+#define S5PV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
+ S3C2410_UCON_RXILEVEL | \
+ S3C2410_UCON_TXIRQMODE | \
+ S3C2410_UCON_RXIRQMODE | \
+ S3C2410_UCON_RXFIFO_TOI | \
+ S3C2443_UCON_RXERR_IRQEN)
+
+#define S5PV210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
+ S5PV210_UFCON_TXTRIG4 | \
+ S5PV210_UFCON_RXTRIG4)
#ifndef __ASSEMBLY__
-/* struct s3c24xx_uart_clksrc
- *
- * this structure defines a named clock source that can be used for the
- * uart, so that the best clock can be selected for the requested baud
- * rate.
- *
- * min_baud and max_baud define the range of baud-rates this clock is
- * acceptable for, if they are both zero, it is assumed any baud rate that
- * can be generated from this clock will be used.
- *
- * divisor gives the divisor from the clock to the one seen by the uart
-*/
-
-struct s3c24xx_uart_clksrc {
- const char *name;
- unsigned int divisor;
- unsigned int min_baud;
- unsigned int max_baud;
-};
-
/* configuration structure for per-machine configurations for the
* serial port
*
@@ -257,15 +258,13 @@
unsigned char unused;
unsigned short flags;
upf_t uart_flags; /* default uart flags */
+ unsigned int clk_sel;
unsigned int has_fracval;
unsigned long ucon; /* value of ucon for port */
unsigned long ulcon; /* value of ulcon for port */
unsigned long ufcon; /* value of ufcon for port */
-
- struct s3c24xx_uart_clksrc *clocks;
- unsigned int clocks_size;
};
/* s3c24xx_uart_devs
diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
index 4c16fa3..aea68b6 100644
--- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
+++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h
@@ -31,7 +31,6 @@
/**
* struct s3c64xx_spi_info - SPI Controller defining structure
* @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field.
- * @src_clk_name: Platform name of the corresponding clock.
* @clk_from_cmu: If the SPI clock/prescalar control block is present
* by the platform's clock-management-unit and not in SPI controller.
* @num_cs: Number of CS this controller emulates.
@@ -43,7 +42,6 @@
*/
struct s3c64xx_spi_info {
int src_clk_nr;
- char *src_clk_name;
bool clk_from_cmu;
int num_cs;
@@ -58,18 +56,28 @@
};
/**
- * s3c64xx_spi_set_info - SPI Controller configure callback by the board
+ * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board
* initialization code.
- * @cntrlr: SPI controller number the configuration is for.
+ * @pd: SPI platform data to set.
* @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks.
* @num_cs: Number of elements in the 'cs' array.
*
* Call this from machine init code for each SPI Controller that
* has some chips attached to it.
*/
-extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
-extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs);
+extern void s3c64xx_spi0_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+extern void s3c64xx_spi1_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+extern void s3c64xx_spi2_set_platdata(struct s3c64xx_spi_info *pd,
+ int src_clk_nr, int num_cs);
+/* defined by architecture to configure gpio */
+extern int s3c64xx_spi0_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi1_cfg_gpio(struct platform_device *dev);
+extern int s3c64xx_spi2_cfg_gpio(struct platform_device *dev);
+
+extern struct s3c64xx_spi_info s3c64xx_spi0_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi1_pdata;
+extern struct s3c64xx_spi_info s3c64xx_spi2_pdata;
#endif /* __S3C64XX_PLAT_SPI_H */
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index e7b3c75..656dc00 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -66,8 +66,6 @@
enum cd_types cd_type;
enum clk_types clk_type;
- char **clocks; /* set of clock sources */
-
int ext_cd_gpio;
bool ext_cd_gpio_invert;
int (*ext_cd_init)(void (*notify_func)(struct platform_device *,
@@ -125,16 +123,17 @@
extern void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5p64x0_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5p6440_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s5p6450_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
/* S3C2416 SDHCI setup */
#ifdef CONFIG_S3C2416_SETUP_SDHCI
-extern char *s3c2416_hsmmc_clksrcs[4];
-
static inline void s3c2416_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC */
}
@@ -142,7 +141,6 @@
static inline void s3c2416_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio;
#endif /* CONFIG_S3C_DEV_HSMMC1 */
}
@@ -152,15 +150,13 @@
static inline void s3c2416_default_sdhci1(void) { }
#endif /* CONFIG_S3C2416_SETUP_SDHCI */
+
/* S3C64XX SDHCI setup */
#ifdef CONFIG_S3C64XX_SETUP_SDHCI
-extern char *s3c64xx_hsmmc_clksrcs[4];
-
static inline void s3c6400_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
#endif
}
@@ -168,7 +164,6 @@
static inline void s3c6400_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
#endif
}
@@ -176,7 +171,6 @@
static inline void s3c6400_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
#endif
}
@@ -184,7 +178,6 @@
static inline void s3c6410_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
#endif
}
@@ -192,7 +185,6 @@
static inline void s3c6410_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
#endif
}
@@ -200,7 +192,6 @@
static inline void s3c6410_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
#endif
}
@@ -215,15 +206,51 @@
#endif /* CONFIG_S3C64XX_SETUP_SDHCI */
+/* S5P64X0 SDHCI setup */
+
+#ifdef CONFIG_S5P64X0_SETUP_SDHCI
+static inline void s5p64x0_default_sdhci0(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC
+ s3c_hsmmc0_def_platdata.cfg_gpio = s5p64x0_setup_sdhci0_cfg_gpio;
+#endif
+}
+
+static inline void s5p64x0_default_sdhci1(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC1
+ s3c_hsmmc1_def_platdata.cfg_gpio = s5p64x0_setup_sdhci1_cfg_gpio;
+#endif
+}
+
+static inline void s5p6440_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5p6440_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+static inline void s5p6450_default_sdhci2(void)
+{
+#ifdef CONFIG_S3C_DEV_HSMMC2
+ s3c_hsmmc2_def_platdata.cfg_gpio = s5p6450_setup_sdhci2_cfg_gpio;
+#endif
+}
+
+#else
+static inline void s5p64x0_default_sdhci0(void) { }
+static inline void s5p64x0_default_sdhci1(void) { }
+static inline void s5p6440_default_sdhci2(void) { }
+static inline void s5p6450_default_sdhci2(void) { }
+
+#endif /* CONFIG_S5P64X0_SETUP_SDHCI */
+
/* S5PC100 SDHCI setup */
#ifdef CONFIG_S5PC100_SETUP_SDHCI
-extern char *s5pc100_hsmmc_clksrcs[4];
-
static inline void s5pc100_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
#endif
}
@@ -231,7 +258,6 @@
static inline void s5pc100_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
#endif
}
@@ -239,7 +265,6 @@
static inline void s5pc100_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
#endif
}
@@ -254,12 +279,9 @@
/* S5PV210 SDHCI setup */
#ifdef CONFIG_S5PV210_SETUP_SDHCI
-extern char *s5pv210_hsmmc_clksrcs[4];
-
static inline void s5pv210_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio;
#endif
}
@@ -267,7 +289,6 @@
static inline void s5pv210_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio;
#endif
}
@@ -275,7 +296,6 @@
static inline void s5pv210_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio;
#endif
}
@@ -283,7 +303,6 @@
static inline void s5pv210_default_sdhci3(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC3
- s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio;
#endif
}
@@ -298,12 +317,9 @@
/* EXYNOS4 SDHCI setup */
#ifdef CONFIG_EXYNOS4_SETUP_SDHCI
-extern char *exynos4_hsmmc_clksrcs[4];
-
static inline void exynos4_default_sdhci0(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC
- s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio;
#endif
}
@@ -311,7 +327,6 @@
static inline void exynos4_default_sdhci1(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC1
- s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio;
#endif
}
@@ -319,7 +334,6 @@
static inline void exynos4_default_sdhci2(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC2
- s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio;
#endif
}
@@ -327,7 +341,6 @@
static inline void exynos4_default_sdhci3(void)
{
#ifdef CONFIG_S3C_DEV_HSMMC3
- s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs;
s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio;
#endif
}
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index 1f17bde..7c756fb 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -109,7 +109,7 @@
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_board_info spi0_board_info[] __initdata = {
{
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 4643ff5..c56ddac 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -105,7 +105,7 @@
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2] = {
+static struct macb_platform_data __initdata eth_data[2] = {
{
/*
* The MDIO pullups on STK1000 are a bit too weak for
diff --git a/arch/avr32/boards/favr-32/setup.c b/arch/avr32/boards/favr-32/setup.c
index 86fab77..27bd6fb 100644
--- a/arch/avr32/boards/favr-32/setup.c
+++ b/arch/avr32/boards/favr-32/setup.c
@@ -50,7 +50,7 @@
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1] = {
+static struct macb_platform_data __initdata eth_data[1] = {
{
.phy_mask = ~(1U << 1),
},
diff --git a/arch/avr32/boards/hammerhead/setup.c b/arch/avr32/boards/hammerhead/setup.c
index da14fbd..9d1efd1 100644
--- a/arch/avr32/boards/hammerhead/setup.c
+++ b/arch/avr32/boards/hammerhead/setup.c
@@ -102,7 +102,7 @@
};
static struct eth_addr __initdata hw_addr[1];
-static struct eth_platform_data __initdata eth_data[1];
+static struct macb_platform_data __initdata eth_data[1];
/*
* The next two functions should go away as the boot loader is
diff --git a/arch/avr32/boards/merisc/setup.c b/arch/avr32/boards/merisc/setup.c
index e61bc94..ed137e3 100644
--- a/arch/avr32/boards/merisc/setup.c
+++ b/arch/avr32/boards/merisc/setup.c
@@ -52,7 +52,7 @@
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static int ads7846_get_pendown_state_PB26(void)
{
diff --git a/arch/avr32/boards/mimc200/setup.c b/arch/avr32/boards/mimc200/setup.c
index c4da5cb..05358aa 100644
--- a/arch/avr32/boards/mimc200/setup.c
+++ b/arch/avr32/boards/mimc200/setup.c
@@ -86,7 +86,7 @@
u8 addr[6];
};
static struct eth_addr __initdata hw_addr[2];
-static struct eth_platform_data __initdata eth_data[2];
+static struct macb_platform_data __initdata eth_data[2];
static struct spi_eeprom eeprom_25lc010 = {
.name = "25lc010",
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 7fbf0dc..402a7bb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1067,7 +1067,7 @@
* -------------------------------------------------------------------- */
#ifdef CONFIG_CPU_AT32AP7000
-static struct eth_platform_data macb0_data;
+static struct macb_platform_data macb0_data;
static struct resource macb0_resource[] = {
PBMEM(0xfff01800),
IRQ(25),
@@ -1076,7 +1076,7 @@
DEV_CLK(hclk, macb0, hsb, 8);
DEV_CLK(pclk, macb0, pbb, 6);
-static struct eth_platform_data macb1_data;
+static struct macb_platform_data macb1_data;
static struct resource macb1_resource[] = {
PBMEM(0xfff01c00),
IRQ(26),
@@ -1086,7 +1086,7 @@
DEV_CLK(pclk, macb1, pbb, 7);
struct platform_device *__init
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data)
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data)
{
struct platform_device *pdev;
u32 pin_mask;
@@ -1163,7 +1163,7 @@
return NULL;
}
- memcpy(pdev->dev.platform_data, data, sizeof(struct eth_platform_data));
+ memcpy(pdev->dev.platform_data, data, sizeof(struct macb_platform_data));
platform_device_register(pdev);
return pdev;
diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h
index 5d7ffca..67b111c 100644
--- a/arch/avr32/mach-at32ap/include/mach/board.h
+++ b/arch/avr32/mach-at32ap/include/mach/board.h
@@ -6,6 +6,7 @@
#include <linux/types.h>
#include <linux/serial.h>
+#include <linux/platform_data/macb.h>
#define GPIO_PIN_NONE (-1)
@@ -42,12 +43,8 @@
void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
struct platform_device *at32_add_device_usart(unsigned int id);
-struct eth_platform_data {
- u32 phy_mask;
- u8 is_rmii;
-};
struct platform_device *
-at32_add_device_eth(unsigned int id, struct eth_platform_data *data);
+at32_add_device_eth(unsigned int id, struct macb_platform_data *data);
struct spi_board_info;
struct platform_device *
diff --git a/arch/sparc/kernel/ds.c b/arch/sparc/kernel/ds.c
index 7429b47..381edcd 100644
--- a/arch/sparc/kernel/ds.c
+++ b/arch/sparc/kernel/ds.c
@@ -1181,13 +1181,11 @@
dp->rcv_buf_len = 4096;
- dp->ds_states = kzalloc(sizeof(ds_states_template),
- GFP_KERNEL);
+ dp->ds_states = kmemdup(ds_states_template,
+ sizeof(ds_states_template), GFP_KERNEL);
if (!dp->ds_states)
goto out_free_rcv_buf;
- memcpy(dp->ds_states, ds_states_template,
- sizeof(ds_states_template));
dp->num_ds_states = ARRAY_SIZE(ds_states_template);
for (i = 0; i < dp->num_ds_states; i++)
diff --git a/arch/sparc/kernel/prom_common.c b/arch/sparc/kernel/prom_common.c
index 4661480..741df91 100644
--- a/arch/sparc/kernel/prom_common.c
+++ b/arch/sparc/kernel/prom_common.c
@@ -58,12 +58,10 @@
void *new_val;
int err;
- new_val = kmalloc(len, GFP_KERNEL);
+ new_val = kmemdup(val, len, GFP_KERNEL);
if (!new_val)
return -ENOMEM;
- memcpy(new_val, val, len);
-
err = -ENODEV;
mutex_lock(&of_set_property_mutex);
diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c
index 5175ac2..8a7f817 100644
--- a/arch/sparc/mm/btfixup.c
+++ b/arch/sparc/mm/btfixup.c
@@ -302,8 +302,7 @@
case 'i': /* INT */
if ((insn & 0xc1c00000) == 0x01000000) /* %HI */
set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10));
- else if ((insn & 0x80002000) == 0x80002000 &&
- (insn & 0x01800000) != 0x01800000) /* %LO */
+ else if ((insn & 0x80002000) == 0x80002000) /* %LO */
set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff));
else {
prom_printf(insn_i, p, addr, insn);
diff --git a/arch/x86/include/asm/e820.h b/arch/x86/include/asm/e820.h
index c954703..908b969 100644
--- a/arch/x86/include/asm/e820.h
+++ b/arch/x86/include/asm/e820.h
@@ -53,13 +53,6 @@
*/
#define E820_RESERVED_KERN 128
-/*
- * Address ranges that need to be mapped by the kernel direct
- * mapping. This is used to make sure regions such as
- * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch().
- */
-#define E820_RESERVED_EFI 129
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
struct e820entry {
@@ -122,7 +115,6 @@
}
#endif
-extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type);
extern unsigned long e820_end_of_ram_pfn(void);
extern unsigned long e820_end_of_low_ram_pfn(void);
extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index b8d8bfc..7093e4a 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -33,6 +33,8 @@
#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6) \
efi_call_virt(f, a1, a2, a3, a4, a5, a6)
+#define efi_ioremap(addr, size, type) ioremap_cache(addr, size)
+
#else /* !CONFIG_X86_32 */
extern u64 efi_call0(void *fp);
@@ -82,6 +84,9 @@
efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
(u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+ u32 type);
+
#endif /* CONFIG_X86_32 */
extern int add_efi_memmap;
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index 65ffd11..303a0e4 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -135,7 +135,6 @@
printk(KERN_CONT "(usable)");
break;
case E820_RESERVED:
- case E820_RESERVED_EFI:
printk(KERN_CONT "(reserved)");
break;
case E820_ACPI:
@@ -784,7 +783,7 @@
/*
* Find the highest page frame number we have available
*/
-unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
{
int i;
unsigned long last_pfn = 0;
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 9a9e40f..cf0ef98 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -691,8 +691,6 @@
void __init setup_arch(char **cmdline_p)
{
- unsigned long end_pfn;
-
#ifdef CONFIG_X86_32
memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
visws_early_detect();
@@ -934,24 +932,7 @@
init_gbpages();
/* max_pfn_mapped is updated here */
- end_pfn = max_low_pfn;
-
-#ifdef CONFIG_X86_64
- /*
- * There may be regions after the last E820_RAM region that we
- * want to include in the kernel direct mapping, such as
- * EFI_RUNTIME_SERVICES_DATA.
- */
- if (efi_enabled) {
- unsigned long efi_end;
-
- efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI);
- if (efi_end > max_low_pfn)
- end_pfn = efi_end;
- }
-#endif
-
- max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT);
+ max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
max_pfn_mapped = max_low_pfn_mapped;
#ifdef CONFIG_X86_64
diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c
index c9718a1..37718f0 100644
--- a/arch/x86/platform/efi/efi.c
+++ b/arch/x86/platform/efi/efi.c
@@ -323,13 +323,10 @@
case EFI_UNUSABLE_MEMORY:
e820_type = E820_UNUSABLE;
break;
- case EFI_RUNTIME_SERVICES_DATA:
- e820_type = E820_RESERVED_EFI;
- break;
default:
/*
* EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE
- * EFI_MEMORY_MAPPED_IO
+ * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO
* EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE
*/
e820_type = E820_RESERVED;
@@ -674,21 +671,10 @@
end_pfn = PFN_UP(end);
if (end_pfn <= max_low_pfn_mapped
|| (end_pfn > (1UL << (32 - PAGE_SHIFT))
- && end_pfn <= max_pfn_mapped)) {
+ && end_pfn <= max_pfn_mapped))
va = __va(md->phys_addr);
-
- if (!(md->attribute & EFI_MEMORY_WB)) {
- addr = (u64) (unsigned long)va;
- npages = md->num_pages;
- memrange_efi_to_native(&addr, &npages);
- set_memory_uc(addr, npages);
- }
- } else {
- if (!(md->attribute & EFI_MEMORY_WB))
- va = ioremap_nocache(md->phys_addr, size);
- else
- va = ioremap_cache(md->phys_addr, size);
- }
+ else
+ va = efi_ioremap(md->phys_addr, size, md->type);
md->virt_addr = (u64) (unsigned long) va;
@@ -698,6 +684,13 @@
continue;
}
+ if (!(md->attribute & EFI_MEMORY_WB)) {
+ addr = md->virt_addr;
+ npages = md->num_pages;
+ memrange_efi_to_native(&addr, &npages);
+ set_memory_uc(addr, npages);
+ }
+
systab = (u64) (unsigned long) efi_phys.systab;
if (md->phys_addr <= systab && systab < end) {
systab += md->virt_addr - md->phys_addr;
diff --git a/arch/x86/platform/efi/efi_32.c b/arch/x86/platform/efi/efi_32.c
index e36bf71..40e4469 100644
--- a/arch/x86/platform/efi/efi_32.c
+++ b/arch/x86/platform/efi/efi_32.c
@@ -39,43 +39,14 @@
*/
static unsigned long efi_rt_eflags;
-static pgd_t efi_bak_pg_dir_pointer[2];
void efi_call_phys_prelog(void)
{
- unsigned long cr4;
- unsigned long temp;
struct desc_ptr gdt_descr;
local_irq_save(efi_rt_eflags);
- /*
- * If I don't have PAE, I should just duplicate two entries in page
- * directory. If I have PAE, I just need to duplicate one entry in
- * page directory.
- */
- cr4 = read_cr4_safe();
-
- if (cr4 & X86_CR4_PAE) {
- efi_bak_pg_dir_pointer[0].pgd =
- swapper_pg_dir[pgd_index(0)].pgd;
- swapper_pg_dir[0].pgd =
- swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
- } else {
- efi_bak_pg_dir_pointer[0].pgd =
- swapper_pg_dir[pgd_index(0)].pgd;
- efi_bak_pg_dir_pointer[1].pgd =
- swapper_pg_dir[pgd_index(0x400000)].pgd;
- swapper_pg_dir[pgd_index(0)].pgd =
- swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
- temp = PAGE_OFFSET + 0x400000;
- swapper_pg_dir[pgd_index(0x400000)].pgd =
- swapper_pg_dir[pgd_index(temp)].pgd;
- }
-
- /*
- * After the lock is released, the original page table is restored.
- */
+ load_cr3(initial_page_table);
__flush_tlb_all();
gdt_descr.address = __pa(get_cpu_gdt_table(0));
@@ -85,28 +56,13 @@
void efi_call_phys_epilog(void)
{
- unsigned long cr4;
struct desc_ptr gdt_descr;
gdt_descr.address = (unsigned long)get_cpu_gdt_table(0);
gdt_descr.size = GDT_SIZE - 1;
load_gdt(&gdt_descr);
- cr4 = read_cr4_safe();
-
- if (cr4 & X86_CR4_PAE) {
- swapper_pg_dir[pgd_index(0)].pgd =
- efi_bak_pg_dir_pointer[0].pgd;
- } else {
- swapper_pg_dir[pgd_index(0)].pgd =
- efi_bak_pg_dir_pointer[0].pgd;
- swapper_pg_dir[pgd_index(0x400000)].pgd =
- efi_bak_pg_dir_pointer[1].pgd;
- }
-
- /*
- * After the lock is released, the original page table is restored.
- */
+ load_cr3(swapper_pg_dir);
__flush_tlb_all();
local_irq_restore(efi_rt_eflags);
diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c
index 312250c..ac3aa54 100644
--- a/arch/x86/platform/efi/efi_64.c
+++ b/arch/x86/platform/efi/efi_64.c
@@ -80,3 +80,20 @@
local_irq_restore(efi_flags);
early_code_mapping_set_exec(0);
}
+
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+ u32 type)
+{
+ unsigned long last_map_pfn;
+
+ if (type == EFI_MEMORY_MAPPED_IO)
+ return ioremap(phys_addr, size);
+
+ last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+ if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
+ unsigned long top = last_map_pfn << PAGE_SHIFT;
+ efi_ioremap(top, size - (top - phys_addr), type);
+ }
+
+ return (void __iomem *)__va(phys_addr);
+}
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index 1093f80..b2c7179 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -173,9 +173,21 @@
domid_t domid = DOMID_SELF;
int ret;
- ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
- if (ret > 0)
- max_pages = ret;
+ /*
+ * For the initial domain we use the maximum reservation as
+ * the maximum page.
+ *
+ * For guest domains the current maximum reservation reflects
+ * the current maximum rather than the static maximum. In this
+ * case the e820 map provided to us will cover the static
+ * maximum region.
+ */
+ if (xen_initial_domain()) {
+ ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+ if (ret > 0)
+ max_pages = ret;
+ }
+
return min(max_pages, MAX_DOMAIN_PAGES);
}
diff --git a/block/blk-core.c b/block/blk-core.c
index ea70e6c..15de223 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -366,7 +366,14 @@
if (drain_all)
blk_throtl_drain(q);
- __blk_run_queue(q);
+ /*
+ * This function might be called on a queue which failed
+ * driver init after queue creation. Some drivers
+ * (e.g. fd) get unhappy in such cases. Kick queue iff
+ * dispatch queue has something on it.
+ */
+ if (!list_empty(&q->queue_head))
+ __blk_run_queue(q);
if (drain_all)
nr_rqs = q->rq.count[0] + q->rq.count[1];
@@ -467,6 +474,7 @@
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
q->backing_dev_info.name = "block";
+ q->node = node_id;
err = bdi_init(&q->backing_dev_info);
if (err) {
@@ -551,7 +559,7 @@
if (!uninit_q)
return NULL;
- q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
+ q = blk_init_allocated_queue(uninit_q, rfn, lock);
if (!q)
blk_cleanup_queue(uninit_q);
@@ -563,18 +571,9 @@
blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
spinlock_t *lock)
{
- return blk_init_allocated_queue_node(q, rfn, lock, -1);
-}
-EXPORT_SYMBOL(blk_init_allocated_queue);
-
-struct request_queue *
-blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
- spinlock_t *lock, int node_id)
-{
if (!q)
return NULL;
- q->node = node_id;
if (blk_init_free_list(q))
return NULL;
@@ -604,7 +603,7 @@
return NULL;
}
-EXPORT_SYMBOL(blk_init_allocated_queue_node);
+EXPORT_SYMBOL(blk_init_allocated_queue);
int blk_get_queue(struct request_queue *q)
{
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index 16ace89..4c12869 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -3184,7 +3184,7 @@
}
}
- if (ret)
+ if (ret && ret != -EEXIST)
printk(KERN_ERR "cfq: cic link failed!\n");
return ret;
@@ -3200,6 +3200,7 @@
{
struct io_context *ioc = NULL;
struct cfq_io_context *cic;
+ int ret;
might_sleep_if(gfp_mask & __GFP_WAIT);
@@ -3207,6 +3208,7 @@
if (!ioc)
return NULL;
+retry:
cic = cfq_cic_lookup(cfqd, ioc);
if (cic)
goto out;
@@ -3215,7 +3217,12 @@
if (cic == NULL)
goto err;
- if (cfq_cic_link(cfqd, ioc, cic, gfp_mask))
+ ret = cfq_cic_link(cfqd, ioc, cic, gfp_mask);
+ if (ret == -EEXIST) {
+ /* someone has linked cic to ioc already */
+ cfq_cic_free(cic);
+ goto retry;
+ } else if (ret)
goto err_free;
out:
@@ -4036,6 +4043,11 @@
if (blkio_alloc_blkg_stats(&cfqg->blkg)) {
kfree(cfqg);
+
+ spin_lock(&cic_index_lock);
+ ida_remove(&cic_index_ida, cfqd->cic_index);
+ spin_unlock(&cic_index_lock);
+
kfree(cfqd);
return NULL;
}
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 8004ac3..587cce5 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2601,6 +2601,8 @@
c->Request.Timeout = 0;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+ c->Request.CDB[7] = (size >> 8) & 0xFF;
+ c->Request.CDB[8] = size & 0xFF;
break;
case TEST_UNIT_READY:
c->Request.CDBLen = 6;
@@ -4880,7 +4882,7 @@
{
if (h->msix_vector || h->msi_vector) {
if (!request_irq(h->intr[h->intr_mode], msixhandler,
- IRQF_DISABLED, h->devname, h))
+ 0, h->devname, h))
return 0;
dev_err(&h->pdev->dev, "Unable to get msi irq %d"
" for %s\n", h->intr[h->intr_mode],
@@ -4889,7 +4891,7 @@
}
if (!request_irq(h->intr[h->intr_mode], intxhandler,
- IRQF_DISABLED, h->devname, h))
+ IRQF_SHARED, h->devname, h))
return 0;
dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
h->intr[h->intr_mode], h->devname);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index 68b205a..1e888c9 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -422,7 +422,7 @@
/*
* We use punch hole to reclaim the free space used by the
- * image a.k.a. discard. However we do support discard if
+ * image a.k.a. discard. However we do not support discard if
* encryption is enabled, because it may give an attacker
* useful information.
*/
@@ -797,7 +797,7 @@
}
q->limits.discard_granularity = inode->i_sb->s_blocksize;
- q->limits.discard_alignment = inode->i_sb->s_blocksize;
+ q->limits.discard_alignment = 0;
q->limits.max_discard_sectors = UINT_MAX >> 9;
q->limits.discard_zeroes_data = 1;
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 65cc424..148ab94 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -183,10 +183,6 @@
static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
static void rbd_dev_release(struct device *dev);
-static ssize_t rbd_snap_rollback(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t size);
static ssize_t rbd_snap_add(struct device *dev,
struct device_attribute *attr,
const char *buf,
@@ -461,6 +457,10 @@
u32 snap_count = le32_to_cpu(ondisk->snap_count);
int ret = -ENOMEM;
+ if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) {
+ return -ENXIO;
+ }
+
init_rwsem(&header->snap_rwsem);
header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
@@ -1356,32 +1356,6 @@
}
/*
- * Request sync osd rollback
- */
-static int rbd_req_sync_rollback_obj(struct rbd_device *dev,
- u64 snapid,
- const char *obj)
-{
- struct ceph_osd_req_op *ops;
- int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_ROLLBACK, 0);
- if (ret < 0)
- return ret;
-
- ops[0].snap.snapid = snapid;
-
- ret = rbd_req_sync_op(dev, NULL,
- CEPH_NOSNAP,
- 0,
- CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
- ops,
- 1, obj, 0, 0, NULL, NULL, NULL);
-
- rbd_destroy_ops(ops);
-
- return ret;
-}
-
-/*
* Request sync osd read
*/
static int rbd_req_sync_exec(struct rbd_device *dev,
@@ -1610,8 +1584,13 @@
goto out_dh;
rc = rbd_header_from_disk(header, dh, snap_count, GFP_KERNEL);
- if (rc < 0)
+ if (rc < 0) {
+ if (rc == -ENXIO) {
+ pr_warning("unrecognized header format"
+ " for image %s", rbd_dev->obj);
+ }
goto out_dh;
+ }
if (snap_count != header->total_snaps) {
snap_count = header->total_snaps;
@@ -1882,7 +1861,6 @@
static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
-static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
static struct attribute *rbd_attrs[] = {
&dev_attr_size.attr,
@@ -1893,7 +1871,6 @@
&dev_attr_current_snap.attr,
&dev_attr_refresh.attr,
&dev_attr_create_snap.attr,
- &dev_attr_rollback_snap.attr,
NULL
};
@@ -2424,64 +2401,6 @@
return ret;
}
-static ssize_t rbd_snap_rollback(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t count)
-{
- struct rbd_device *rbd_dev = dev_to_rbd(dev);
- int ret;
- u64 snapid;
- u64 cur_ofs;
- char *seg_name = NULL;
- char *snap_name = kmalloc(count + 1, GFP_KERNEL);
- ret = -ENOMEM;
- if (!snap_name)
- return ret;
-
- /* parse snaps add command */
- snprintf(snap_name, count, "%s", buf);
- seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
- if (!seg_name)
- goto done;
-
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
- if (ret < 0)
- goto done_unlock;
-
- dout("snapid=%lld\n", snapid);
-
- cur_ofs = 0;
- while (cur_ofs < rbd_dev->header.image_size) {
- cur_ofs += rbd_get_segment(&rbd_dev->header,
- rbd_dev->obj,
- cur_ofs, (u64)-1,
- seg_name, NULL);
- dout("seg_name=%s\n", seg_name);
-
- ret = rbd_req_sync_rollback_obj(rbd_dev, snapid, seg_name);
- if (ret < 0)
- pr_warning("could not roll back obj %s err=%d\n",
- seg_name, ret);
- }
-
- ret = __rbd_update_snaps(rbd_dev);
- if (ret < 0)
- goto done_unlock;
-
- ret = count;
-
-done_unlock:
- mutex_unlock(&ctl_mutex);
-done:
- kfree(seg_name);
- kfree(snap_name);
-
- return ret;
-}
-
static struct bus_attribute rbd_bus_attrs[] = {
__ATTR(add, S_IWUSR, NULL, rbd_add),
__ATTR(remove, S_IWUSR, NULL, rbd_remove),
diff --git a/drivers/block/swim3.c b/drivers/block/swim3.c
index ae3e167..89ddab1 100644
--- a/drivers/block/swim3.c
+++ b/drivers/block/swim3.c
@@ -16,6 +16,8 @@
* handle GCR disks
*/
+#undef DEBUG
+
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -36,13 +38,11 @@
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
-static DEFINE_MUTEX(swim3_mutex);
-static struct request_queue *swim3_queue;
-static struct gendisk *disks[2];
-static struct request *fd_req;
-
#define MAX_FLOPPIES 2
+static DEFINE_MUTEX(swim3_mutex);
+static struct gendisk *disks[MAX_FLOPPIES];
+
enum swim_state {
idle,
locating,
@@ -177,7 +177,6 @@
struct floppy_state {
enum swim_state state;
- spinlock_t lock;
struct swim3 __iomem *swim3; /* hardware registers */
struct dbdma_regs __iomem *dma; /* DMA controller registers */
int swim3_intr; /* interrupt number for SWIM3 */
@@ -204,8 +203,20 @@
int wanted;
struct macio_dev *mdev;
char dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
+ int index;
+ struct request *cur_req;
};
+#define swim3_err(fmt, arg...) dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#define swim3_warn(fmt, arg...) dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#define swim3_info(fmt, arg...) dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+
+#ifdef DEBUG
+#define swim3_dbg(fmt, arg...) dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#else
+#define swim3_dbg(fmt, arg...) do { } while(0)
+#endif
+
static struct floppy_state floppy_states[MAX_FLOPPIES];
static int floppy_count = 0;
static DEFINE_SPINLOCK(swim3_lock);
@@ -224,17 +235,8 @@
0, 0, 0, 0, 0, 0
};
-static void swim3_select(struct floppy_state *fs, int sel);
-static void swim3_action(struct floppy_state *fs, int action);
-static int swim3_readbit(struct floppy_state *fs, int bit);
-static void do_fd_request(struct request_queue * q);
-static void start_request(struct floppy_state *fs);
-static void set_timeout(struct floppy_state *fs, int nticks,
- void (*proc)(unsigned long));
-static void scan_track(struct floppy_state *fs);
static void seek_track(struct floppy_state *fs, int n);
static void init_dma(struct dbdma_cmd *cp, int cmd, void *buf, int count);
-static void setup_transfer(struct floppy_state *fs);
static void act(struct floppy_state *fs);
static void scan_timeout(unsigned long data);
static void seek_timeout(unsigned long data);
@@ -254,20 +256,23 @@
unsigned int clearing);
static int floppy_revalidate(struct gendisk *disk);
-static bool swim3_end_request(int err, unsigned int nr_bytes)
+static bool swim3_end_request(struct floppy_state *fs, int err, unsigned int nr_bytes)
{
- if (__blk_end_request(fd_req, err, nr_bytes))
+ struct request *req = fs->cur_req;
+ int rc;
+
+ swim3_dbg(" end request, err=%d nr_bytes=%d, cur_req=%p\n",
+ err, nr_bytes, req);
+
+ if (err)
+ nr_bytes = blk_rq_cur_bytes(req);
+ rc = __blk_end_request(req, err, nr_bytes);
+ if (rc)
return true;
-
- fd_req = NULL;
+ fs->cur_req = NULL;
return false;
}
-static bool swim3_end_request_cur(int err)
-{
- return swim3_end_request(err, blk_rq_cur_bytes(fd_req));
-}
-
static void swim3_select(struct floppy_state *fs, int sel)
{
struct swim3 __iomem *sw = fs->swim3;
@@ -303,50 +308,53 @@
return (stat & DATA) == 0;
}
-static void do_fd_request(struct request_queue * q)
-{
- int i;
-
- for(i=0; i<floppy_count; i++) {
- struct floppy_state *fs = &floppy_states[i];
- if (fs->mdev->media_bay &&
- check_media_bay(fs->mdev->media_bay) != MB_FD)
- continue;
- start_request(fs);
- }
-}
-
static void start_request(struct floppy_state *fs)
{
struct request *req;
unsigned long x;
+ swim3_dbg("start request, initial state=%d\n", fs->state);
+
if (fs->state == idle && fs->wanted) {
fs->state = available;
wake_up(&fs->wait);
return;
}
while (fs->state == idle) {
- if (!fd_req) {
- fd_req = blk_fetch_request(swim3_queue);
- if (!fd_req)
+ swim3_dbg("start request, idle loop, cur_req=%p\n", fs->cur_req);
+ if (!fs->cur_req) {
+ fs->cur_req = blk_fetch_request(disks[fs->index]->queue);
+ swim3_dbg(" fetched request %p\n", fs->cur_req);
+ if (!fs->cur_req)
break;
}
- req = fd_req;
-#if 0
- printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
- req->rq_disk->disk_name, req->cmd,
- (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
- printk(" errors=%d current_nr_sectors=%u\n",
- req->errors, blk_rq_cur_sectors(req));
+ req = fs->cur_req;
+
+ if (fs->mdev->media_bay &&
+ check_media_bay(fs->mdev->media_bay) != MB_FD) {
+ swim3_dbg("%s", " media bay absent, dropping req\n");
+ swim3_end_request(fs, -ENODEV, 0);
+ continue;
+ }
+
+#if 0 /* This is really too verbose */
+ swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
+ req->rq_disk->disk_name, req->cmd,
+ (long)blk_rq_pos(req), blk_rq_sectors(req),
+ req->buffer);
+ swim3_dbg(" errors=%d current_nr_sectors=%u\n",
+ req->errors, blk_rq_cur_sectors(req));
#endif
if (blk_rq_pos(req) >= fs->total_secs) {
- swim3_end_request_cur(-EIO);
+ swim3_dbg(" pos out of bounds (%ld, max is %ld)\n",
+ (long)blk_rq_pos(req), (long)fs->total_secs);
+ swim3_end_request(fs, -EIO, 0);
continue;
}
if (fs->ejected) {
- swim3_end_request_cur(-EIO);
+ swim3_dbg("%s", " disk ejected\n");
+ swim3_end_request(fs, -EIO, 0);
continue;
}
@@ -354,7 +362,8 @@
if (fs->write_prot < 0)
fs->write_prot = swim3_readbit(fs, WRITE_PROT);
if (fs->write_prot) {
- swim3_end_request_cur(-EIO);
+ swim3_dbg("%s", " try to write, disk write protected\n");
+ swim3_end_request(fs, -EIO, 0);
continue;
}
}
@@ -369,7 +378,6 @@
x = ((long)blk_rq_pos(req)) % fs->secpercyl;
fs->head = x / fs->secpertrack;
fs->req_sector = x % fs->secpertrack + 1;
- fd_req = req;
fs->state = do_transfer;
fs->retries = 0;
@@ -377,12 +385,14 @@
}
}
+static void do_fd_request(struct request_queue * q)
+{
+ start_request(q->queuedata);
+}
+
static void set_timeout(struct floppy_state *fs, int nticks,
void (*proc)(unsigned long))
{
- unsigned long flags;
-
- spin_lock_irqsave(&fs->lock, flags);
if (fs->timeout_pending)
del_timer(&fs->timeout);
fs->timeout.expires = jiffies + nticks;
@@ -390,7 +400,6 @@
fs->timeout.data = (unsigned long) fs;
add_timer(&fs->timeout);
fs->timeout_pending = 1;
- spin_unlock_irqrestore(&fs->lock, flags);
}
static inline void scan_track(struct floppy_state *fs)
@@ -442,40 +451,45 @@
struct swim3 __iomem *sw = fs->swim3;
struct dbdma_cmd *cp = fs->dma_cmd;
struct dbdma_regs __iomem *dr = fs->dma;
+ struct request *req = fs->cur_req;
- if (blk_rq_cur_sectors(fd_req) <= 0) {
- printk(KERN_ERR "swim3: transfer 0 sectors?\n");
+ if (blk_rq_cur_sectors(req) <= 0) {
+ swim3_warn("%s", "Transfer 0 sectors ?\n");
return;
}
- if (rq_data_dir(fd_req) == WRITE)
+ if (rq_data_dir(req) == WRITE)
n = 1;
else {
n = fs->secpertrack - fs->req_sector + 1;
- if (n > blk_rq_cur_sectors(fd_req))
- n = blk_rq_cur_sectors(fd_req);
+ if (n > blk_rq_cur_sectors(req))
+ n = blk_rq_cur_sectors(req);
}
+
+ swim3_dbg(" setup xfer at sect %d (of %d) head %d for %d\n",
+ fs->req_sector, fs->secpertrack, fs->head, n);
+
fs->scount = n;
swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
out_8(&sw->sector, fs->req_sector);
out_8(&sw->nsect, n);
out_8(&sw->gap3, 0);
out_le32(&dr->cmdptr, virt_to_bus(cp));
- if (rq_data_dir(fd_req) == WRITE) {
+ if (rq_data_dir(req) == WRITE) {
/* Set up 3 dma commands: write preamble, data, postamble */
init_dma(cp, OUTPUT_MORE, write_preamble, sizeof(write_preamble));
++cp;
- init_dma(cp, OUTPUT_MORE, fd_req->buffer, 512);
+ init_dma(cp, OUTPUT_MORE, req->buffer, 512);
++cp;
init_dma(cp, OUTPUT_LAST, write_postamble, sizeof(write_postamble));
} else {
- init_dma(cp, INPUT_LAST, fd_req->buffer, n * 512);
+ init_dma(cp, INPUT_LAST, req->buffer, n * 512);
}
++cp;
out_le16(&cp->command, DBDMA_STOP);
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
in_8(&sw->error);
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
- if (rq_data_dir(fd_req) == WRITE)
+ if (rq_data_dir(req) == WRITE)
out_8(&sw->control_bis, WRITE_SECTORS);
in_8(&sw->intr);
out_le32(&dr->control, (RUN << 16) | RUN);
@@ -488,12 +502,16 @@
static void act(struct floppy_state *fs)
{
for (;;) {
+ swim3_dbg(" act loop, state=%d, req_cyl=%d, cur_cyl=%d\n",
+ fs->state, fs->req_cyl, fs->cur_cyl);
+
switch (fs->state) {
case idle:
return; /* XXX shouldn't get here */
case locating:
if (swim3_readbit(fs, TRACK_ZERO)) {
+ swim3_dbg("%s", " locate track 0\n");
fs->cur_cyl = 0;
if (fs->req_cyl == 0)
fs->state = do_transfer;
@@ -511,7 +529,7 @@
break;
}
if (fs->req_cyl == fs->cur_cyl) {
- printk("whoops, seeking 0\n");
+ swim3_warn("%s", "Whoops, seeking 0\n");
fs->state = do_transfer;
break;
}
@@ -527,7 +545,9 @@
case do_transfer:
if (fs->cur_cyl != fs->req_cyl) {
if (fs->retries > 5) {
- swim3_end_request_cur(-EIO);
+ swim3_err("Wrong cylinder in transfer, want: %d got %d\n",
+ fs->req_cyl, fs->cur_cyl);
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
return;
}
@@ -542,7 +562,7 @@
return;
default:
- printk(KERN_ERR"swim3: unknown state %d\n", fs->state);
+ swim3_err("Unknown state %d\n", fs->state);
return;
}
}
@@ -552,59 +572,75 @@
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
+ unsigned long flags;
+ swim3_dbg("* scan timeout, state=%d\n", fs->state);
+
+ spin_lock_irqsave(&swim3_lock, flags);
fs->timeout_pending = 0;
out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
fs->cur_cyl = -1;
if (fs->retries > 5) {
- swim3_end_request_cur(-EIO);
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
} else {
fs->state = jogging;
act(fs);
}
+ spin_unlock_irqrestore(&swim3_lock, flags);
}
static void seek_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
+ unsigned long flags;
+ swim3_dbg("* seek timeout, state=%d\n", fs->state);
+
+ spin_lock_irqsave(&swim3_lock, flags);
fs->timeout_pending = 0;
out_8(&sw->control_bic, DO_SEEK);
out_8(&sw->select, RELAX);
out_8(&sw->intr_enable, 0);
- printk(KERN_ERR "swim3: seek timeout\n");
- swim3_end_request_cur(-EIO);
+ swim3_err("%s", "Seek timeout\n");
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
+ spin_unlock_irqrestore(&swim3_lock, flags);
}
static void settle_timeout(unsigned long data)
{
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
+ unsigned long flags;
+ swim3_dbg("* settle timeout, state=%d\n", fs->state);
+
+ spin_lock_irqsave(&swim3_lock, flags);
fs->timeout_pending = 0;
if (swim3_readbit(fs, SEEK_COMPLETE)) {
out_8(&sw->select, RELAX);
fs->state = locating;
act(fs);
- return;
+ goto unlock;
}
out_8(&sw->select, RELAX);
if (fs->settle_time < 2*HZ) {
++fs->settle_time;
set_timeout(fs, 1, settle_timeout);
- return;
+ goto unlock;
}
- printk(KERN_ERR "swim3: seek settle timeout\n");
- swim3_end_request_cur(-EIO);
+ swim3_err("%s", "Seek settle timeout\n");
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
+ unlock:
+ spin_unlock_irqrestore(&swim3_lock, flags);
}
static void xfer_timeout(unsigned long data)
@@ -612,8 +648,12 @@
struct floppy_state *fs = (struct floppy_state *) data;
struct swim3 __iomem *sw = fs->swim3;
struct dbdma_regs __iomem *dr = fs->dma;
+ unsigned long flags;
int n;
+ swim3_dbg("* xfer timeout, state=%d\n", fs->state);
+
+ spin_lock_irqsave(&swim3_lock, flags);
fs->timeout_pending = 0;
out_le32(&dr->control, RUN << 16);
/* We must wait a bit for dbdma to stop */
@@ -622,12 +662,13 @@
out_8(&sw->intr_enable, 0);
out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
out_8(&sw->select, RELAX);
- printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
- (rq_data_dir(fd_req)==WRITE? "writ": "read"),
- (long)blk_rq_pos(fd_req));
- swim3_end_request_cur(-EIO);
+ swim3_err("Timeout %sing sector %ld\n",
+ (rq_data_dir(fs->cur_req)==WRITE? "writ": "read"),
+ (long)blk_rq_pos(fs->cur_req));
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
+ spin_unlock_irqrestore(&swim3_lock, flags);
}
static irqreturn_t swim3_interrupt(int irq, void *dev_id)
@@ -638,12 +679,17 @@
int stat, resid;
struct dbdma_regs __iomem *dr;
struct dbdma_cmd *cp;
+ unsigned long flags;
+ struct request *req = fs->cur_req;
+ swim3_dbg("* interrupt, state=%d\n", fs->state);
+
+ spin_lock_irqsave(&swim3_lock, flags);
intr = in_8(&sw->intr);
err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
if ((intr & ERROR_INTR) && fs->state != do_transfer)
- printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
- fs->state, rq_data_dir(fd_req), intr, err);
+ swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n",
+ fs->state, rq_data_dir(req), intr, err);
switch (fs->state) {
case locating:
if (intr & SEEN_SECTOR) {
@@ -653,10 +699,10 @@
del_timer(&fs->timeout);
fs->timeout_pending = 0;
if (sw->ctrack == 0xff) {
- printk(KERN_ERR "swim3: seen sector but cyl=ff?\n");
+ swim3_err("%s", "Seen sector but cyl=ff?\n");
fs->cur_cyl = -1;
if (fs->retries > 5) {
- swim3_end_request_cur(-EIO);
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
} else {
@@ -668,8 +714,8 @@
fs->cur_cyl = sw->ctrack;
fs->cur_sector = sw->csect;
if (fs->expect_cyl != -1 && fs->expect_cyl != fs->cur_cyl)
- printk(KERN_ERR "swim3: expected cyl %d, got %d\n",
- fs->expect_cyl, fs->cur_cyl);
+ swim3_err("Expected cyl %d, got %d\n",
+ fs->expect_cyl, fs->cur_cyl);
fs->state = do_transfer;
act(fs);
}
@@ -704,7 +750,7 @@
fs->timeout_pending = 0;
dr = fs->dma;
cp = fs->dma_cmd;
- if (rq_data_dir(fd_req) == WRITE)
+ if (rq_data_dir(req) == WRITE)
++cp;
/*
* Check that the main data transfer has finished.
@@ -729,31 +775,32 @@
if (intr & ERROR_INTR) {
n = fs->scount - 1 - resid / 512;
if (n > 0) {
- blk_update_request(fd_req, 0, n << 9);
+ blk_update_request(req, 0, n << 9);
fs->req_sector += n;
}
if (fs->retries < 5) {
++fs->retries;
act(fs);
} else {
- printk("swim3: error %sing block %ld (err=%x)\n",
- rq_data_dir(fd_req) == WRITE? "writ": "read",
- (long)blk_rq_pos(fd_req), err);
- swim3_end_request_cur(-EIO);
+ swim3_err("Error %sing block %ld (err=%x)\n",
+ rq_data_dir(req) == WRITE? "writ": "read",
+ (long)blk_rq_pos(req), err);
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
}
} else {
if ((stat & ACTIVE) == 0 || resid != 0) {
/* musta been an error */
- printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
- printk(KERN_ERR " state=%d, dir=%x, intr=%x, err=%x\n",
- fs->state, rq_data_dir(fd_req), intr, err);
- swim3_end_request_cur(-EIO);
+ swim3_err("fd dma error: stat=%x resid=%d\n", stat, resid);
+ swim3_err(" state=%d, dir=%x, intr=%x, err=%x\n",
+ fs->state, rq_data_dir(req), intr, err);
+ swim3_end_request(fs, -EIO, 0);
fs->state = idle;
start_request(fs);
break;
}
- if (swim3_end_request(0, fs->scount << 9)) {
+ fs->retries = 0;
+ if (swim3_end_request(fs, 0, fs->scount << 9)) {
fs->req_sector += fs->scount;
if (fs->req_sector > fs->secpertrack) {
fs->req_sector -= fs->secpertrack;
@@ -770,8 +817,9 @@
start_request(fs);
break;
default:
- printk(KERN_ERR "swim3: don't know what to do in state %d\n", fs->state);
+ swim3_err("Don't know what to do in state %d\n", fs->state);
}
+ spin_unlock_irqrestore(&swim3_lock, flags);
return IRQ_HANDLED;
}
@@ -781,26 +829,31 @@
}
*/
+/* Called under the mutex to grab exclusive access to a drive */
static int grab_drive(struct floppy_state *fs, enum swim_state state,
int interruptible)
{
unsigned long flags;
- spin_lock_irqsave(&fs->lock, flags);
- if (fs->state != idle) {
+ swim3_dbg("%s", "-> grab drive\n");
+
+ spin_lock_irqsave(&swim3_lock, flags);
+ if (fs->state != idle && fs->state != available) {
++fs->wanted;
while (fs->state != available) {
+ spin_unlock_irqrestore(&swim3_lock, flags);
if (interruptible && signal_pending(current)) {
--fs->wanted;
- spin_unlock_irqrestore(&fs->lock, flags);
return -EINTR;
}
interruptible_sleep_on(&fs->wait);
+ spin_lock_irqsave(&swim3_lock, flags);
}
--fs->wanted;
}
fs->state = state;
- spin_unlock_irqrestore(&fs->lock, flags);
+ spin_unlock_irqrestore(&swim3_lock, flags);
+
return 0;
}
@@ -808,10 +861,12 @@
{
unsigned long flags;
- spin_lock_irqsave(&fs->lock, flags);
+ swim3_dbg("%s", "-> release drive\n");
+
+ spin_lock_irqsave(&swim3_lock, flags);
fs->state = idle;
start_request(fs);
- spin_unlock_irqrestore(&fs->lock, flags);
+ spin_unlock_irqrestore(&swim3_lock, flags);
}
static int fd_eject(struct floppy_state *fs)
@@ -966,6 +1021,7 @@
{
struct floppy_state *fs = disk->private_data;
struct swim3 __iomem *sw = fs->swim3;
+
mutex_lock(&swim3_mutex);
if (fs->ref_count > 0 && --fs->ref_count == 0) {
swim3_action(fs, MOTOR_OFF);
@@ -1031,30 +1087,48 @@
.revalidate_disk= floppy_revalidate,
};
+static void swim3_mb_event(struct macio_dev* mdev, int mb_state)
+{
+ struct floppy_state *fs = macio_get_drvdata(mdev);
+ struct swim3 __iomem *sw = fs->swim3;
+
+ if (!fs)
+ return;
+ if (mb_state != MB_FD)
+ return;
+
+ /* Clear state */
+ out_8(&sw->intr_enable, 0);
+ in_8(&sw->intr);
+ in_8(&sw->error);
+}
+
static int swim3_add_device(struct macio_dev *mdev, int index)
{
struct device_node *swim = mdev->ofdev.dev.of_node;
struct floppy_state *fs = &floppy_states[index];
int rc = -EBUSY;
+ /* Do this first for message macros */
+ memset(fs, 0, sizeof(*fs));
+ fs->mdev = mdev;
+ fs->index = index;
+
/* Check & Request resources */
if (macio_resource_count(mdev) < 2) {
- printk(KERN_WARNING "ifd%d: no address for %s\n",
- index, swim->full_name);
+ swim3_err("%s", "No address in device-tree\n");
return -ENXIO;
}
- if (macio_irq_count(mdev) < 2) {
- printk(KERN_WARNING "fd%d: no intrs for device %s\n",
- index, swim->full_name);
+ if (macio_irq_count(mdev) < 1) {
+ swim3_err("%s", "No interrupt in device-tree\n");
+ return -ENXIO;
}
if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
- printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
- index, swim->full_name);
+ swim3_err("%s", "Can't request mmio resource\n");
return -EBUSY;
}
if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
- printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
- index, swim->full_name);
+ swim3_err("%s", "Can't request dma resource\n");
macio_release_resource(mdev, 0);
return -EBUSY;
}
@@ -1063,22 +1137,18 @@
if (mdev->media_bay == NULL)
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
- memset(fs, 0, sizeof(*fs));
- spin_lock_init(&fs->lock);
fs->state = idle;
fs->swim3 = (struct swim3 __iomem *)
ioremap(macio_resource_start(mdev, 0), 0x200);
if (fs->swim3 == NULL) {
- printk("fd%d: couldn't map registers for %s\n",
- index, swim->full_name);
+ swim3_err("%s", "Couldn't map mmio registers\n");
rc = -ENOMEM;
goto out_release;
}
fs->dma = (struct dbdma_regs __iomem *)
ioremap(macio_resource_start(mdev, 1), 0x200);
if (fs->dma == NULL) {
- printk("fd%d: couldn't map DMA for %s\n",
- index, swim->full_name);
+ swim3_err("%s", "Couldn't map dma registers\n");
iounmap(fs->swim3);
rc = -ENOMEM;
goto out_release;
@@ -1090,31 +1160,25 @@
fs->secpercyl = 36;
fs->secpertrack = 18;
fs->total_secs = 2880;
- fs->mdev = mdev;
init_waitqueue_head(&fs->wait);
fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
memset(fs->dma_cmd, 0, 2 * sizeof(struct dbdma_cmd));
st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
+ if (mdev->media_bay == NULL || check_media_bay(mdev->media_bay) == MB_FD)
+ swim3_mb_event(mdev, MB_FD);
+
if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
- printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
- index, fs->swim3_intr, swim->full_name);
+ swim3_err("%s", "Couldn't request interrupt\n");
pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
goto out_unmap;
return -EBUSY;
}
-/*
- if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
- printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
- fs->dma_intr);
- return -EBUSY;
- }
-*/
init_timer(&fs->timeout);
- printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
+ swim3_info("SWIM3 floppy controller %s\n",
mdev->media_bay ? "in media bay" : "");
return 0;
@@ -1132,41 +1196,42 @@
static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
{
- int i, rc;
struct gendisk *disk;
+ int index, rc;
+
+ index = floppy_count++;
+ if (index >= MAX_FLOPPIES)
+ return -ENXIO;
/* Add the drive */
- rc = swim3_add_device(mdev, floppy_count);
+ rc = swim3_add_device(mdev, index);
if (rc)
return rc;
+ /* Now register that disk. Same comment about failure handling */
+ disk = disks[index] = alloc_disk(1);
+ if (disk == NULL)
+ return -ENOMEM;
+ disk->queue = blk_init_queue(do_fd_request, &swim3_lock);
+ if (disk->queue == NULL) {
+ put_disk(disk);
+ return -ENOMEM;
+ }
+ disk->queue->queuedata = &floppy_states[index];
- /* Now create the queue if not there yet */
- if (swim3_queue == NULL) {
+ if (index == 0) {
/* If we failed, there isn't much we can do as the driver is still
* too dumb to remove the device, just bail out
*/
if (register_blkdev(FLOPPY_MAJOR, "fd"))
return 0;
- swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
- if (swim3_queue == NULL) {
- unregister_blkdev(FLOPPY_MAJOR, "fd");
- return 0;
- }
}
- /* Now register that disk. Same comment about failure handling */
- i = floppy_count++;
- disk = disks[i] = alloc_disk(1);
- if (disk == NULL)
- return 0;
-
disk->major = FLOPPY_MAJOR;
- disk->first_minor = i;
+ disk->first_minor = index;
disk->fops = &floppy_fops;
- disk->private_data = &floppy_states[i];
- disk->queue = swim3_queue;
+ disk->private_data = &floppy_states[index];
disk->flags |= GENHD_FL_REMOVABLE;
- sprintf(disk->disk_name, "fd%d", i);
+ sprintf(disk->disk_name, "fd%d", index);
set_capacity(disk, 2880);
add_disk(disk);
@@ -1194,6 +1259,9 @@
.of_match_table = swim3_match,
},
.probe = swim3_attach,
+#ifdef CONFIG_PMAC_MEDIABAY
+ .mediabay_event = swim3_mb_event,
+#endif
#if 0
.suspend = swim3_suspend,
.resume = swim3_resume,
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 11b41fd..5ccf142 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -188,7 +188,7 @@
The core driver to support Marvell Bluetooth devices.
This driver is required if you want to support
- Marvell Bluetooth devices, such as 8688/8787.
+ Marvell Bluetooth devices, such as 8688/8787/8797.
Say Y here to compile Marvell Bluetooth driver
into the kernel or say M to compile it as module.
@@ -201,8 +201,8 @@
The driver for Marvell Bluetooth chipsets with SDIO interface.
This driver is required if you want to use Marvell Bluetooth
- devices with SDIO interface. Currently SD8688/SD8787 chipsets are
- supported.
+ devices with SDIO interface. Currently SD8688/SD8787/SD8797
+ chipsets are supported.
Say Y here to compile support for Marvell BT-over-SDIO driver
into the kernel or say M to compile it as module.
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 9ef4816..27b74b0 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -65,7 +65,7 @@
.io_port_1 = 0x01,
.io_port_2 = 0x02,
};
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
+static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
.cfg = 0x00,
.host_int_mask = 0x02,
.host_intstatus = 0x03,
@@ -92,7 +92,14 @@
static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
.helper = NULL,
.firmware = "mrvl/sd8787_uapsta.bin",
- .reg = &btmrvl_reg_8787,
+ .reg = &btmrvl_reg_87xx,
+ .sd_blksz_fw_dl = 256,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
+ .helper = NULL,
+ .firmware = "mrvl/sd8797_uapsta.bin",
+ .reg = &btmrvl_reg_87xx,
.sd_blksz_fw_dl = 256,
};
@@ -103,6 +110,9 @@
/* Marvell SD8787 Bluetooth device */
{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+ /* Marvell SD8797 Bluetooth device */
+ { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
+ .driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
{ } /* Terminating entry */
};
@@ -1076,3 +1086,4 @@
MODULE_FIRMWARE("sd8688_helper.bin");
MODULE_FIRMWARE("sd8688.bin");
MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index fe4ebc3..eabc437 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -777,9 +777,8 @@
usb_mark_last_busy(data->udev);
}
- usb_free_urb(urb);
-
done:
+ usb_free_urb(urb);
return err;
}
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index 57104147..a626e15 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -19,6 +19,7 @@
#include <linux/amba/pl330.h>
#include <linux/pm_runtime.h>
#include <linux/scatterlist.h>
+#include <linux/of.h>
#define NR_DEFAULT_DESC 16
@@ -116,6 +117,9 @@
struct dma_pl330_chan *pchan;
};
+/* forward declaration */
+static struct amba_driver pl330_driver;
+
static inline struct dma_pl330_chan *
to_pchan(struct dma_chan *ch)
{
@@ -267,6 +271,32 @@
tasklet_schedule(&pch->task);
}
+bool pl330_filter(struct dma_chan *chan, void *param)
+{
+ u8 *peri_id;
+
+ if (chan->device->dev->driver != &pl330_driver.drv)
+ return false;
+
+#ifdef CONFIG_OF
+ if (chan->device->dev->of_node) {
+ const __be32 *prop_value;
+ phandle phandle;
+ struct device_node *node;
+
+ prop_value = ((struct property *)param)->value;
+ phandle = be32_to_cpup(prop_value++);
+ node = of_find_node_by_phandle(phandle);
+ return ((chan->private == node) &&
+ (chan->chan_id == be32_to_cpup(prop_value)));
+ }
+#endif
+
+ peri_id = chan->private;
+ return *peri_id == (unsigned)param;
+}
+EXPORT_SYMBOL(pl330_filter);
+
static int pl330_alloc_chan_resources(struct dma_chan *chan)
{
struct dma_pl330_chan *pch = to_pchan(chan);
@@ -497,7 +527,7 @@
static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
{
struct dma_pl330_dmac *pdmac = pch->dmac;
- struct dma_pl330_peri *peri = pch->chan.private;
+ u8 *peri_id = pch->chan.private;
struct dma_pl330_desc *desc;
/* Pluck one desc from the pool of DMAC */
@@ -522,13 +552,7 @@
desc->txd.cookie = 0;
async_tx_ack(&desc->txd);
- if (peri) {
- desc->req.rqtype = peri->rqtype;
- desc->req.peri = pch->chan.chan_id;
- } else {
- desc->req.rqtype = MEMTOMEM;
- desc->req.peri = 0;
- }
+ desc->req.peri = peri_id ? pch->chan.chan_id : 0;
dma_async_tx_descriptor_init(&desc->txd, &pch->chan);
@@ -615,12 +639,14 @@
case DMA_TO_DEVICE:
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
src = dma_addr;
dst = pch->fifo_addr;
break;
case DMA_FROM_DEVICE:
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
src = pch->fifo_addr;
dst = dma_addr;
break;
@@ -646,16 +672,12 @@
{
struct dma_pl330_desc *desc;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct pl330_info *pi;
int burst;
if (unlikely(!pch || !len))
return NULL;
- if (peri && peri->rqtype != MEMTOMEM)
- return NULL;
-
pi = &pch->dmac->pif;
desc = __pl330_prep_dma_memcpy(pch, dst, src, len);
@@ -664,6 +686,7 @@
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = MEMTOMEM;
/* Select max possible burst size */
burst = pi->pcfg.data_bus_width / 8;
@@ -692,25 +715,14 @@
{
struct dma_pl330_desc *first, *desc = NULL;
struct dma_pl330_chan *pch = to_pchan(chan);
- struct dma_pl330_peri *peri = chan->private;
struct scatterlist *sg;
unsigned long flags;
int i;
dma_addr_t addr;
- if (unlikely(!pch || !sgl || !sg_len || !peri))
+ if (unlikely(!pch || !sgl || !sg_len))
return NULL;
- /* Make sure the direction is consistent */
- if ((direction == DMA_TO_DEVICE &&
- peri->rqtype != MEMTODEV) ||
- (direction == DMA_FROM_DEVICE &&
- peri->rqtype != DEVTOMEM)) {
- dev_err(pch->dmac->pif.dev, "%s:%d Invalid Direction\n",
- __func__, __LINE__);
- return NULL;
- }
-
addr = pch->fifo_addr;
first = NULL;
@@ -750,11 +762,13 @@
if (direction == DMA_TO_DEVICE) {
desc->rqcfg.src_inc = 1;
desc->rqcfg.dst_inc = 0;
+ desc->req.rqtype = MEMTODEV;
fill_px(&desc->px,
addr, sg_dma_address(sg), sg_dma_len(sg));
} else {
desc->rqcfg.src_inc = 0;
desc->rqcfg.dst_inc = 1;
+ desc->req.rqtype = DEVTOMEM;
fill_px(&desc->px,
sg_dma_address(sg), addr, sg_dma_len(sg));
}
@@ -856,32 +870,16 @@
INIT_LIST_HEAD(&pd->channels);
/* Initialize channel parameters */
- num_chan = max(pdat ? pdat->nr_valid_peri : 0, (u8)pi->pcfg.num_chan);
+ num_chan = max(pdat ? pdat->nr_valid_peri : (u8)pi->pcfg.num_peri,
+ (u8)pi->pcfg.num_chan);
pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL);
for (i = 0; i < num_chan; i++) {
pch = &pdmac->peripherals[i];
- if (pdat) {
- struct dma_pl330_peri *peri = &pdat->peri[i];
-
- switch (peri->rqtype) {
- case MEMTOMEM:
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- break;
- case MEMTODEV:
- case DEVTOMEM:
- dma_cap_set(DMA_SLAVE, pd->cap_mask);
- dma_cap_set(DMA_CYCLIC, pd->cap_mask);
- break;
- default:
- dev_err(&adev->dev, "DEVTODEV Not Supported\n");
- continue;
- }
- pch->chan.private = peri;
- } else {
- dma_cap_set(DMA_MEMCPY, pd->cap_mask);
- pch->chan.private = NULL;
- }
+ if (!adev->dev.of_node)
+ pch->chan.private = pdat ? &pdat->peri_id[i] : NULL;
+ else
+ pch->chan.private = adev->dev.of_node;
INIT_LIST_HEAD(&pch->work_list);
spin_lock_init(&pch->lock);
@@ -894,6 +892,15 @@
}
pd->dev = &adev->dev;
+ if (pdat) {
+ pd->cap_mask = pdat->cap_mask;
+ } else {
+ dma_cap_set(DMA_MEMCPY, pd->cap_mask);
+ if (pi->pcfg.num_peri) {
+ dma_cap_set(DMA_SLAVE, pd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, pd->cap_mask);
+ }
+ }
pd->device_alloc_chan_resources = pl330_alloc_chan_resources;
pd->device_free_chan_resources = pl330_free_chan_resources;
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index c811cb1..2cce44a 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -746,6 +746,37 @@
ibft_cleanup();
}
+#ifdef CONFIG_ACPI
+static const struct {
+ char *sign;
+} ibft_signs[] = {
+ /*
+ * One spec says "IBFT", the other says "iBFT". We have to check
+ * for both.
+ */
+ { ACPI_SIG_IBFT },
+ { "iBFT" },
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+ int i;
+ struct acpi_table_header *table = NULL;
+
+ if (acpi_disabled)
+ return;
+
+ for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+ acpi_get_table(ibft_signs[i].sign, 0, &table);
+ ibft_addr = (struct acpi_table_ibft *)table;
+ }
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
/*
* ibft_init() - creates sysfs tree entries for the iBFT data.
*/
@@ -753,9 +784,16 @@
{
int rc = 0;
+ /*
+ As on UEFI systems the setup_arch()/find_ibft_region()
+ is called before ACPI tables are parsed and it only does
+ legacy finding.
+ */
+ if (!ibft_addr)
+ acpi_find_ibft_region();
+
if (ibft_addr) {
- printk(KERN_INFO "iBFT detected at 0x%llx.\n",
- (u64)isa_virt_to_bus(ibft_addr));
+ pr_info("iBFT detected.\n");
rc = ibft_check_device();
if (rc)
diff --git a/drivers/firmware/iscsi_ibft_find.c b/drivers/firmware/iscsi_ibft_find.c
index bfe7232..4da4eb9a 100644
--- a/drivers/firmware/iscsi_ibft_find.c
+++ b/drivers/firmware/iscsi_ibft_find.c
@@ -45,13 +45,6 @@
static const struct {
char *sign;
} ibft_signs[] = {
-#ifdef CONFIG_ACPI
- /*
- * One spec says "IBFT", the other says "iBFT". We have to check
- * for both.
- */
- { ACPI_SIG_IBFT },
-#endif
{ "iBFT" },
{ "BIFT" }, /* Broadcom iSCSI Offload */
};
@@ -62,14 +55,6 @@
#define VGA_MEM 0xA0000 /* VGA buffer */
#define VGA_SIZE 0x20000 /* 128kB */
-#ifdef CONFIG_ACPI
-static int __init acpi_find_ibft(struct acpi_table_header *header)
-{
- ibft_addr = (struct acpi_table_ibft *)header;
- return 0;
-}
-#endif /* CONFIG_ACPI */
-
static int __init find_ibft_in_mem(void)
{
unsigned long pos;
@@ -94,6 +79,7 @@
* the table cannot be valid. */
if (pos + len <= (IBFT_END-1)) {
ibft_addr = (struct acpi_table_ibft *)virt;
+ pr_info("iBFT found at 0x%lx.\n", pos);
goto done;
}
}
@@ -108,20 +94,12 @@
*/
unsigned long __init find_ibft_region(unsigned long *sizep)
{
-#ifdef CONFIG_ACPI
- int i;
-#endif
ibft_addr = NULL;
-#ifdef CONFIG_ACPI
- for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
- acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
-#endif /* CONFIG_ACPI */
-
/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
* only use ACPI for this */
- if (!ibft_addr && !efi_enabled)
+ if (!efi_enabled)
find_ibft_in_mem();
if (ibft_addr) {
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8482a23..aa0b94f 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -141,6 +141,12 @@
help
Say yes here to support the PrimeCell PL061 GPIO device
+config GPIO_PXA
+ bool "PXA GPIO support"
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ Say yes here to support the PXA GPIO device
+
config GPIO_XILINX
bool "Xilinx GPIO support"
depends on PPC_OF || MICROBLAZE
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 4e018d6..8ef9e9a 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -40,7 +40,7 @@
obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o
obj-$(CONFIG_GPIO_PCH) += gpio-pch.o
obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o
-obj-$(CONFIG_PLAT_PXA) += gpio-pxa.o
+obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o
obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o
obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o
obj-$(CONFIG_ARCH_SA1100) += gpio-sa1100.o
diff --git a/drivers/gpio/gpio-da9052.c b/drivers/gpio/gpio-da9052.c
index 038f5eb8..f8ce29e 100644
--- a/drivers/gpio/gpio-da9052.c
+++ b/drivers/gpio/gpio-da9052.c
@@ -22,7 +22,6 @@
#include <linux/mfd/da9052/da9052.h>
#include <linux/mfd/da9052/reg.h>
#include <linux/mfd/da9052/pdata.h>
-#include <linux/mfd/da9052/gpio.h>
#define DA9052_INPUT 1
#define DA9052_OUTPUT_OPENDRAIN 2
@@ -43,6 +42,9 @@
#define DA9052_GPIO_MASK_UPPER_NIBBLE 0xF0
#define DA9052_GPIO_MASK_LOWER_NIBBLE 0x0F
#define DA9052_GPIO_NIBBLE_SHIFT 4
+#define DA9052_IRQ_GPI0 16
+#define DA9052_GPIO_ODD_SHIFT 7
+#define DA9052_GPIO_EVEN_SHIFT 3
struct da9052_gpio {
struct da9052 *da9052;
@@ -104,33 +106,26 @@
static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
{
struct da9052_gpio *gpio = to_da9052_gpio(gc);
- unsigned char register_value = 0;
int ret;
if (da9052_gpio_port_odd(offset)) {
- if (value) {
- register_value = DA9052_GPIO_ODD_PORT_MODE;
ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
DA9052_GPIO_0_1_REG,
DA9052_GPIO_ODD_PORT_MODE,
- register_value);
+ value << DA9052_GPIO_ODD_SHIFT);
if (ret != 0)
dev_err(gpio->da9052->dev,
"Failed to updated gpio odd reg,%d",
ret);
- }
} else {
- if (value) {
- register_value = DA9052_GPIO_EVEN_PORT_MODE;
ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
DA9052_GPIO_0_1_REG,
DA9052_GPIO_EVEN_PORT_MODE,
- register_value);
+ value << DA9052_GPIO_EVEN_SHIFT);
if (ret != 0)
dev_err(gpio->da9052->dev,
"Failed to updated gpio even reg,%d",
ret);
- }
}
}
@@ -201,9 +196,9 @@
.direction_input = da9052_gpio_direction_input,
.direction_output = da9052_gpio_direction_output,
.to_irq = da9052_gpio_to_irq,
- .can_sleep = 1;
- .ngpio = 16;
- .base = -1;
+ .can_sleep = 1,
+ .ngpio = 16,
+ .base = -1,
};
static int __devinit da9052_gpio_probe(struct platform_device *pdev)
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index ea8e738..461958f 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -332,6 +332,34 @@
&chip->reg->regs[chip->ch].imask);
}
+static void ioh_irq_disable(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+ unsigned long flags;
+ u32 ien;
+
+ spin_lock_irqsave(&chip->spinlock, flags);
+ ien = ioread32(&chip->reg->regs[chip->ch].ien);
+ ien &= ~(1 << (d->irq - chip->irq_base));
+ iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static void ioh_irq_enable(struct irq_data *d)
+{
+ struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+ struct ioh_gpio *chip = gc->private;
+ unsigned long flags;
+ u32 ien;
+
+ spin_lock_irqsave(&chip->spinlock, flags);
+ ien = ioread32(&chip->reg->regs[chip->ch].ien);
+ ien |= 1 << (d->irq - chip->irq_base);
+ iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+ spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
{
struct ioh_gpio *chip = dev_id;
@@ -339,7 +367,7 @@
int i, j;
int ret = IRQ_NONE;
- for (i = 0; i < 8; i++) {
+ for (i = 0; i < 8; i++, chip++) {
reg_val = ioread32(&chip->reg->regs[i].istatus);
for (j = 0; j < num_ports[i]; j++) {
if (reg_val & BIT(j)) {
@@ -370,6 +398,8 @@
ct->chip.irq_mask = ioh_irq_mask;
ct->chip.irq_unmask = ioh_irq_unmask;
ct->chip.irq_set_type = ioh_irq_type;
+ ct->chip.irq_disable = ioh_irq_disable;
+ ct->chip.irq_enable = ioh_irq_enable;
irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
IRQ_NOREQUEST | IRQ_NOPROBE, 0);
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index ec3fcf0..5cd04b6 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -132,6 +132,15 @@
return 0;
}
+static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+ /* GPIO 28..31 are input only on MPC5121 */
+ if (gpio >= 28)
+ return -EINVAL;
+
+ return mpc8xxx_gpio_dir_out(gc, gpio, val);
+}
+
static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
{
struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -340,11 +349,10 @@
mm_gc->save_regs = mpc8xxx_gpio_save_regs;
gc->ngpio = MPC8XXX_GPIO_PINS;
gc->direction_input = mpc8xxx_gpio_dir_in;
- gc->direction_output = mpc8xxx_gpio_dir_out;
- if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
- gc->get = mpc8572_gpio_get;
- else
- gc->get = mpc8xxx_gpio_get;
+ gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ?
+ mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out;
+ gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
+ mpc8572_gpio_get : mpc8xxx_gpio_get;
gc->set = mpc8xxx_gpio_set;
gc->to_irq = mpc8xxx_gpio_to_irq;
diff --git a/drivers/gpio/gpio-pl061.c b/drivers/gpio/gpio-pl061.c
index 093c90b..4102f63 100644
--- a/drivers/gpio/gpio-pl061.c
+++ b/drivers/gpio/gpio-pl061.c
@@ -238,10 +238,6 @@
int ret, irq, i;
static DECLARE_BITMAP(init_irq, NR_IRQS);
- pdata = dev->dev.platform_data;
- if (pdata == NULL)
- return -ENODEV;
-
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (chip == NULL)
return -ENOMEM;
diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c
index ee137712..b2d3ee1 100644
--- a/drivers/gpio/gpio-pxa.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,46 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/clk.h>
+#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/gpio-pxa.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/slab.h>
-#include <mach/gpio-pxa.h>
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ * GPLR GPDR GPSR GPCR GRER GFER GEDR
+ * BANK 0 - 0x0000 0x000C 0x0018 0x0024 0x0030 0x003C 0x0048
+ * BANK 1 - 0x0004 0x0010 0x001C 0x0028 0x0034 0x0040 0x004C
+ * BANK 2 - 0x0008 0x0014 0x0020 0x002C 0x0038 0x0044 0x0050
+ *
+ * BANK 3 - 0x0100 0x010C 0x0118 0x0124 0x0130 0x013C 0x0148
+ * BANK 4 - 0x0104 0x0110 0x011C 0x0128 0x0134 0x0140 0x014C
+ * BANK 5 - 0x0108 0x0114 0x0120 0x012C 0x0138 0x0144 0x0150
+ *
+ * NOTE:
+ * BANK 3 is only available on PXA27x and later processors.
+ * BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPLR_OFFSET 0x00
+#define GPDR_OFFSET 0x0C
+#define GPSR_OFFSET 0x18
+#define GPCR_OFFSET 0x24
+#define GRER_OFFSET 0x30
+#define GFER_OFFSET 0x3C
+#define GEDR_OFFSET 0x48
+#define GAFR_OFFSET 0x54
+#define ED_MASK_OFFSET 0x9C /* GPIO edge detection for AP side */
+
+#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
int pxa_last_gpio;
@@ -39,8 +71,20 @@
#endif
};
+enum {
+ PXA25X_GPIO = 0,
+ PXA26X_GPIO,
+ PXA27X_GPIO,
+ PXA3XX_GPIO,
+ PXA93X_GPIO,
+ MMP_GPIO = 0x10,
+ MMP2_GPIO,
+};
+
static DEFINE_SPINLOCK(gpio_lock);
static struct pxa_gpio_chip *pxa_gpio_chips;
+static int gpio_type;
+static void __iomem *gpio_reg_base;
#define for_each_gpio_chip(i, c) \
for (i = 0, c = &pxa_gpio_chips[0]; i <= pxa_last_gpio; i += 32, c++)
@@ -55,6 +99,122 @@
return &pxa_gpio_chips[gpio_to_bank(gpio)];
}
+static inline int gpio_is_pxa_type(int type)
+{
+ return (type & MMP_GPIO) == 0;
+}
+
+static inline int gpio_is_mmp_type(int type)
+{
+ return (type & MMP_GPIO) != 0;
+}
+
+/* GPIO86/87/88/89 on PXA26x have their direction bits in PXA_GPDR(2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(int gpio)
+{
+ if ((gpio_type == PXA26X_GPIO) && (gpio > 85))
+ return 1;
+ return 0;
+}
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+ struct pxa_gpio_chip *pxachip;
+ void __iomem *base;
+ unsigned long gafr = 0, gpdr = 0;
+ int ret, af = 0, dir = 0;
+
+ pxachip = gpio_to_pxachip(gpio);
+ base = gpio_chip_base(&pxachip->chip);
+ gpdr = readl_relaxed(base + GPDR_OFFSET);
+
+ switch (gpio_type) {
+ case PXA25X_GPIO:
+ case PXA26X_GPIO:
+ case PXA27X_GPIO:
+ gafr = readl_relaxed(base + GAFR_OFFSET);
+ af = (gafr >> ((gpio & 0xf) * 2)) & 0x3;
+ dir = gpdr & GPIO_bit(gpio);
+
+ if (__gpio_is_inverted(gpio))
+ ret = (af != 1) || (dir == 0);
+ else
+ ret = (af != 0) || (dir != 0);
+ break;
+ default:
+ ret = gpdr & GPIO_bit(gpio);
+ break;
+ }
+ return ret;
+}
+
+#ifdef CONFIG_ARCH_PXA
+static inline int __pxa_gpio_to_irq(int gpio)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return PXA_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __pxa_irq_to_gpio(int irq)
+{
+ if (gpio_is_pxa_type(gpio_type))
+ return irq - PXA_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __pxa_gpio_to_irq(int gpio) { return -1; }
+static inline int __pxa_irq_to_gpio(int irq) { return -1; }
+#endif
+
+#ifdef CONFIG_ARCH_MMP
+static inline int __mmp_gpio_to_irq(int gpio)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return MMP_GPIO_TO_IRQ(gpio);
+ return -1;
+}
+
+static inline int __mmp_irq_to_gpio(int irq)
+{
+ if (gpio_is_mmp_type(gpio_type))
+ return irq - MMP_GPIO_TO_IRQ(0);
+ return -1;
+}
+#else
+static inline int __mmp_gpio_to_irq(int gpio) { return -1; }
+static inline int __mmp_irq_to_gpio(int irq) { return -1; }
+#endif
+
+static int pxa_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ int gpio, ret;
+
+ gpio = chip->base + offset;
+ ret = __pxa_gpio_to_irq(gpio);
+ if (ret >= 0)
+ return ret;
+ return __mmp_gpio_to_irq(gpio);
+}
+
+int pxa_irq_to_gpio(int irq)
+{
+ int ret;
+
+ ret = __pxa_irq_to_gpio(irq);
+ if (ret >= 0)
+ return ret;
+ return __mmp_irq_to_gpio(irq);
+}
+
static int pxa_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
void __iomem *base = gpio_chip_base(chip);
@@ -63,12 +223,12 @@
spin_lock_irqsave(&gpio_lock, flags);
- value = __raw_readl(base + GPDR_OFFSET);
+ value = readl_relaxed(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
value |= mask;
else
value &= ~mask;
- __raw_writel(value, base + GPDR_OFFSET);
+ writel_relaxed(value, base + GPDR_OFFSET);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
@@ -81,16 +241,16 @@
uint32_t tmp, mask = 1 << offset;
unsigned long flags;
- __raw_writel(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
+ writel_relaxed(mask, base + (value ? GPSR_OFFSET : GPCR_OFFSET));
spin_lock_irqsave(&gpio_lock, flags);
- tmp = __raw_readl(base + GPDR_OFFSET);
+ tmp = readl_relaxed(base + GPDR_OFFSET);
if (__gpio_is_inverted(chip->base + offset))
tmp &= ~mask;
else
tmp |= mask;
- __raw_writel(tmp, base + GPDR_OFFSET);
+ writel_relaxed(tmp, base + GPDR_OFFSET);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
@@ -98,16 +258,16 @@
static int pxa_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- return __raw_readl(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
+ return readl_relaxed(gpio_chip_base(chip) + GPLR_OFFSET) & (1 << offset);
}
static void pxa_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- __raw_writel(1 << offset, gpio_chip_base(chip) +
+ writel_relaxed(1 << offset, gpio_chip_base(chip) +
(value ? GPSR_OFFSET : GPCR_OFFSET));
}
-static int __init pxa_init_gpio_chip(int gpio_end)
+static int __devinit pxa_init_gpio_chip(int gpio_end)
{
int i, gpio, nbanks = gpio_to_bank(gpio_end) + 1;
struct pxa_gpio_chip *chips;
@@ -122,7 +282,7 @@
struct gpio_chip *c = &chips[i].chip;
sprintf(chips[i].label, "gpio-%d", i);
- chips[i].regbase = GPIO_BANK(i);
+ chips[i].regbase = gpio_reg_base + BANK_OFF(i);
c->base = gpio;
c->label = chips[i].label;
@@ -131,6 +291,7 @@
c->direction_output = pxa_gpio_direction_output;
c->get = pxa_gpio_get;
c->set = pxa_gpio_set;
+ c->to_irq = pxa_gpio_to_irq;
/* number of GPIOs on last bank may be less than 32 */
c->ngpio = (gpio + 31 > gpio_end) ? (gpio_end - gpio + 1) : 32;
@@ -147,18 +308,18 @@
{
uint32_t grer, gfer;
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~c->irq_mask;
grer |= c->irq_edge_rise & c->irq_mask;
gfer |= c->irq_edge_fall & c->irq_mask;
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
+ writel_relaxed(grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(gfer, c->regbase + GFER_OFFSET);
}
static int pxa_gpio_irq_type(struct irq_data *d, unsigned int type)
{
struct pxa_gpio_chip *c;
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
unsigned long gpdr, mask = GPIO_bit(gpio);
c = gpio_to_pxachip(gpio);
@@ -176,12 +337,12 @@
type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
}
- gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
+ gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
if (__gpio_is_inverted(gpio))
- __raw_writel(gpdr | mask, c->regbase + GPDR_OFFSET);
+ writel_relaxed(gpdr | mask, c->regbase + GPDR_OFFSET);
else
- __raw_writel(gpdr & ~mask, c->regbase + GPDR_OFFSET);
+ writel_relaxed(gpdr & ~mask, c->regbase + GPDR_OFFSET);
if (type & IRQ_TYPE_EDGE_RISING)
c->irq_edge_rise |= mask;
@@ -212,9 +373,9 @@
for_each_gpio_chip(gpio, c) {
gpio_base = c->chip.base;
- gedr = __raw_readl(c->regbase + GEDR_OFFSET);
+ gedr = readl_relaxed(c->regbase + GEDR_OFFSET);
gedr = gedr & c->irq_mask;
- __raw_writel(gedr, c->regbase + GEDR_OFFSET);
+ writel_relaxed(gedr, c->regbase + GEDR_OFFSET);
n = find_first_bit(&gedr, BITS_PER_LONG);
while (n < BITS_PER_LONG) {
@@ -229,29 +390,29 @@
static void pxa_ack_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
- __raw_writel(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
+ writel_relaxed(GPIO_bit(gpio), c->regbase + GEDR_OFFSET);
}
static void pxa_mask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
uint32_t grer, gfer;
c->irq_mask &= ~GPIO_bit(gpio);
- grer = __raw_readl(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
- gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
- __raw_writel(grer, c->regbase + GRER_OFFSET);
- __raw_writel(gfer, c->regbase + GFER_OFFSET);
+ grer = readl_relaxed(c->regbase + GRER_OFFSET) & ~GPIO_bit(gpio);
+ gfer = readl_relaxed(c->regbase + GFER_OFFSET) & ~GPIO_bit(gpio);
+ writel_relaxed(grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(gfer, c->regbase + GFER_OFFSET);
}
static void pxa_unmask_muxed_gpio(struct irq_data *d)
{
- int gpio = irq_to_gpio(d->irq);
+ int gpio = pxa_irq_to_gpio(d->irq);
struct pxa_gpio_chip *c = gpio_to_pxachip(gpio);
c->irq_mask |= GPIO_bit(gpio);
@@ -266,34 +427,143 @@
.irq_set_type = pxa_gpio_irq_type,
};
-void __init pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn)
+static int pxa_gpio_nums(void)
+{
+ int count = 0;
+
+#ifdef CONFIG_ARCH_PXA
+ if (cpu_is_pxa25x()) {
+#ifdef CONFIG_CPU_PXA26x
+ count = 89;
+ gpio_type = PXA26X_GPIO;
+#elif defined(CONFIG_PXA25x)
+ count = 84;
+ gpio_type = PXA26X_GPIO;
+#endif /* CONFIG_CPU_PXA26x */
+ } else if (cpu_is_pxa27x()) {
+ count = 120;
+ gpio_type = PXA27X_GPIO;
+ } else if (cpu_is_pxa93x() || cpu_is_pxa95x()) {
+ count = 191;
+ gpio_type = PXA93X_GPIO;
+ } else if (cpu_is_pxa3xx()) {
+ count = 127;
+ gpio_type = PXA3XX_GPIO;
+ }
+#endif /* CONFIG_ARCH_PXA */
+
+#ifdef CONFIG_ARCH_MMP
+ if (cpu_is_pxa168() || cpu_is_pxa910()) {
+ count = 127;
+ gpio_type = MMP_GPIO;
+ } else if (cpu_is_mmp2()) {
+ count = 191;
+ gpio_type = MMP2_GPIO;
+ }
+#endif /* CONFIG_ARCH_MMP */
+ return count;
+}
+
+static int __devinit pxa_gpio_probe(struct platform_device *pdev)
{
struct pxa_gpio_chip *c;
- int gpio, irq;
+ struct resource *res;
+ struct clk *clk;
+ int gpio, irq, ret;
+ int irq0 = 0, irq1 = 0, irq_mux, gpio_offset = 0;
- pxa_last_gpio = end;
+ pxa_last_gpio = pxa_gpio_nums();
+ if (!pxa_last_gpio)
+ return -EINVAL;
+
+ irq0 = platform_get_irq_byname(pdev, "gpio0");
+ irq1 = platform_get_irq_byname(pdev, "gpio1");
+ irq_mux = platform_get_irq_byname(pdev, "gpio_mux");
+ if ((irq0 > 0 && irq1 <= 0) || (irq0 <= 0 && irq1 > 0)
+ || (irq_mux <= 0))
+ return -EINVAL;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ gpio_reg_base = ioremap(res->start, resource_size(res));
+ if (!gpio_reg_base)
+ return -EINVAL;
+
+ if (irq0 > 0)
+ gpio_offset = 2;
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Error %ld to get gpio clock\n",
+ PTR_ERR(clk));
+ iounmap(gpio_reg_base);
+ return PTR_ERR(clk);
+ }
+ ret = clk_prepare(clk);
+ if (ret) {
+ clk_put(clk);
+ iounmap(gpio_reg_base);
+ return ret;
+ }
+ ret = clk_enable(clk);
+ if (ret) {
+ clk_unprepare(clk);
+ clk_put(clk);
+ iounmap(gpio_reg_base);
+ return ret;
+ }
/* Initialize GPIO chips */
- pxa_init_gpio_chip(end);
+ pxa_init_gpio_chip(pxa_last_gpio);
/* clear all GPIO edge detects */
for_each_gpio_chip(gpio, c) {
- __raw_writel(0, c->regbase + GFER_OFFSET);
- __raw_writel(0, c->regbase + GRER_OFFSET);
- __raw_writel(~0,c->regbase + GEDR_OFFSET);
+ writel_relaxed(0, c->regbase + GFER_OFFSET);
+ writel_relaxed(0, c->regbase + GRER_OFFSET);
+ writel_relaxed(~0,c->regbase + GEDR_OFFSET);
+ /* unmask GPIO edge detect for AP side */
+ if (gpio_is_mmp_type(gpio_type))
+ writel_relaxed(~0, c->regbase + ED_MASK_OFFSET);
}
- for (irq = gpio_to_irq(start); irq <= gpio_to_irq(end); irq++) {
+#ifdef CONFIG_ARCH_PXA
+ irq = gpio_to_irq(0);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_chained_handler(IRQ_GPIO0, pxa_gpio_demux_handler);
+
+ irq = gpio_to_irq(1);
+ irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
+ handle_edge_irq);
+ set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
+ irq_set_chained_handler(IRQ_GPIO1, pxa_gpio_demux_handler);
+#endif
+
+ for (irq = gpio_to_irq(gpio_offset);
+ irq <= gpio_to_irq(pxa_last_gpio); irq++) {
irq_set_chip_and_handler(irq, &pxa_muxed_gpio_chip,
handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- /* Install handler for GPIO>=2 edge detect interrupts */
- irq_set_chained_handler(mux_irq, pxa_gpio_demux_handler);
- pxa_muxed_gpio_chip.irq_set_wake = fn;
+ irq_set_chained_handler(irq_mux, pxa_gpio_demux_handler);
+ return 0;
}
+static struct platform_driver pxa_gpio_driver = {
+ .probe = pxa_gpio_probe,
+ .driver = {
+ .name = "pxa-gpio",
+ },
+};
+
+static int __init pxa_gpio_init(void)
+{
+ return platform_driver_register(&pxa_gpio_driver);
+}
+postcore_initcall(pxa_gpio_init);
+
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)
{
@@ -301,13 +571,13 @@
int gpio;
for_each_gpio_chip(gpio, c) {
- c->saved_gplr = __raw_readl(c->regbase + GPLR_OFFSET);
- c->saved_gpdr = __raw_readl(c->regbase + GPDR_OFFSET);
- c->saved_grer = __raw_readl(c->regbase + GRER_OFFSET);
- c->saved_gfer = __raw_readl(c->regbase + GFER_OFFSET);
+ c->saved_gplr = readl_relaxed(c->regbase + GPLR_OFFSET);
+ c->saved_gpdr = readl_relaxed(c->regbase + GPDR_OFFSET);
+ c->saved_grer = readl_relaxed(c->regbase + GRER_OFFSET);
+ c->saved_gfer = readl_relaxed(c->regbase + GFER_OFFSET);
/* Clear GPIO transition detect bits */
- __raw_writel(0xffffffff, c->regbase + GEDR_OFFSET);
+ writel_relaxed(0xffffffff, c->regbase + GEDR_OFFSET);
}
return 0;
}
@@ -319,12 +589,12 @@
for_each_gpio_chip(gpio, c) {
/* restore level with set/clear */
- __raw_writel( c->saved_gplr, c->regbase + GPSR_OFFSET);
- __raw_writel(~c->saved_gplr, c->regbase + GPCR_OFFSET);
+ writel_relaxed( c->saved_gplr, c->regbase + GPSR_OFFSET);
+ writel_relaxed(~c->saved_gplr, c->regbase + GPCR_OFFSET);
- __raw_writel(c->saved_grer, c->regbase + GRER_OFFSET);
- __raw_writel(c->saved_gfer, c->regbase + GFER_OFFSET);
- __raw_writel(c->saved_gpdr, c->regbase + GPDR_OFFSET);
+ writel_relaxed(c->saved_grer, c->regbase + GRER_OFFSET);
+ writel_relaxed(c->saved_gfer, c->regbase + GFER_OFFSET);
+ writel_relaxed(c->saved_gpdr, c->regbase + GPDR_OFFSET);
}
}
#else
@@ -336,3 +606,10 @@
.suspend = pxa_gpio_suspend,
.resume = pxa_gpio_resume,
};
+
+static int __init pxa_gpio_sysinit(void)
+{
+ register_syscore_ops(&pxa_gpio_syscore_ops);
+ return 0;
+}
+postcore_initcall(pxa_gpio_sysinit);
diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
index 8662518..6b4d23f 100644
--- a/drivers/gpio/gpio-samsung.c
+++ b/drivers/gpio/gpio-samsung.c
@@ -24,6 +24,9 @@
#include <linux/interrupt.h>
#include <linux/sysdev.h>
#include <linux/ioport.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/of_address.h>
#include <asm/irq.h>
@@ -2374,6 +2377,63 @@
#endif
};
+#if defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF)
+static int exynos4_gpio_xlate(struct gpio_chip *gc, struct device_node *np,
+ const void *gpio_spec, u32 *flags)
+{
+ const __be32 *gpio = gpio_spec;
+ const u32 n = be32_to_cpup(gpio);
+ unsigned int pin = gc->base + be32_to_cpu(gpio[0]);
+
+ if (WARN_ON(gc->of_gpio_n_cells < 4))
+ return -EINVAL;
+
+ if (n > gc->ngpio)
+ return -EINVAL;
+
+ if (s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(be32_to_cpu(gpio[1]))))
+ pr_warn("gpio_xlate: failed to set pin function\n");
+ if (s3c_gpio_setpull(pin, be32_to_cpu(gpio[2])))
+ pr_warn("gpio_xlate: failed to set pin pull up/down\n");
+ if (s5p_gpio_set_drvstr(pin, be32_to_cpu(gpio[3])))
+ pr_warn("gpio_xlate: failed to set pin drive strength\n");
+
+ return n;
+}
+
+static const struct of_device_id exynos4_gpio_dt_match[] __initdata = {
+ { .compatible = "samsung,exynos4-gpio", },
+ {}
+};
+
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ struct gpio_chip *gc = &chip->chip;
+ u64 address;
+
+ if (!of_have_populated_dt())
+ return;
+
+ address = chip->base ? base + ((u32)chip->base & 0xfff) : base + offset;
+ gc->of_node = of_find_matching_node_by_address(NULL,
+ exynos4_gpio_dt_match, address);
+ if (!gc->of_node) {
+ pr_info("gpio: device tree node not found for gpio controller"
+ " with base address %08llx\n", address);
+ return;
+ }
+ gc->of_gpio_n_cells = 4;
+ gc->of_xlate = exynos4_gpio_xlate;
+}
+#elif defined(CONFIG_ARCH_EXYNOS4)
+static __init void exynos4_gpiolib_attach_ofnode(struct samsung_gpio_chip *chip,
+ u64 base, u64 offset)
+{
+ return;
+}
+#endif /* defined(CONFIG_ARCH_EXYNOS4) && defined(CONFIG_OF) */
+
/* TODO: cleanup soc_is_* */
static __init int samsung_gpiolib_init(void)
{
@@ -2455,6 +2515,10 @@
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO1, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1);
@@ -2467,6 +2531,10 @@
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO2, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2);
@@ -2479,6 +2547,10 @@
chip->config = &exynos4_gpio_cfg;
chip->group = group++;
}
+#ifdef CONFIG_CPU_EXYNOS4210
+ exynos4_gpiolib_attach_ofnode(chip,
+ EXYNOS4_PA_GPIO3, i * 0x20);
+#endif
}
samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3);
diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index d09a6e0..004b048 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -62,6 +62,7 @@
const struct intel_device_info *info = INTEL_INFO(dev);
seq_printf(m, "gen: %d\n", info->gen);
+ seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev));
#define B(x) seq_printf(m, #x ": %s\n", yesno(info->x))
B(is_mobile);
B(is_i85x);
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index a9533c5..a9ae374 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1454,6 +1454,14 @@
diff1 = now - dev_priv->last_time1;
+ /* Prevent division-by-zero if we are asking too fast.
+ * Also, we don't get interesting results if we are polling
+ * faster than once in 10ms, so just return the saved value
+ * in such cases.
+ */
+ if (diff1 <= 10)
+ return dev_priv->chipset_power;
+
count1 = I915_READ(DMIEC);
count2 = I915_READ(DDREC);
count3 = I915_READ(CSIEC);
@@ -1484,6 +1492,8 @@
dev_priv->last_count1 = total_count;
dev_priv->last_time1 = now;
+ dev_priv->chipset_power = ret;
+
return ret;
}
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 15bfa91..a1103fc 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -58,15 +58,15 @@
MODULE_PARM_DESC(powersave,
"Enable powersavings, fbc, downclocking, etc. (default: true)");
-unsigned int i915_semaphores __read_mostly = 0;
+int i915_semaphores __read_mostly = -1;
module_param_named(semaphores, i915_semaphores, int, 0600);
MODULE_PARM_DESC(semaphores,
- "Use semaphores for inter-ring sync (default: false)");
+ "Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
-unsigned int i915_enable_rc6 __read_mostly = 0;
+int i915_enable_rc6 __read_mostly = -1;
module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
MODULE_PARM_DESC(i915_enable_rc6,
- "Enable power-saving render C-state 6 (default: true)");
+ "Enable power-saving render C-state 6 (default: -1 (use per-chip default)");
int i915_enable_fbc __read_mostly = -1;
module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
@@ -328,7 +328,7 @@
}
}
-static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
{
int count;
@@ -344,6 +344,22 @@
udelay(10);
}
+void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
+{
+ int count;
+
+ count = 0;
+ while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
+ udelay(10);
+
+ I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1);
+ POSTING_READ(FORCEWAKE_MT);
+
+ count = 0;
+ while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
+ udelay(10);
+}
+
/*
* Generally this is called implicitly by the register read function. However,
* if some sequence requires the GT to not power down then this function should
@@ -356,15 +372,21 @@
/* Forcewake is atomic in case we get in here without the lock */
if (atomic_add_return(1, &dev_priv->forcewake_count) == 1)
- __gen6_gt_force_wake_get(dev_priv);
+ dev_priv->display.force_wake_get(dev_priv);
}
-static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
{
I915_WRITE_NOTRACE(FORCEWAKE, 0);
POSTING_READ(FORCEWAKE);
}
+void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
+{
+ I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0);
+ POSTING_READ(FORCEWAKE_MT);
+}
+
/*
* see gen6_gt_force_wake_get()
*/
@@ -373,7 +395,7 @@
WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
if (atomic_dec_and_test(&dev_priv->forcewake_count))
- __gen6_gt_force_wake_put(dev_priv);
+ dev_priv->display.force_wake_put(dev_priv);
}
void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
@@ -903,8 +925,9 @@
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
(((dev_priv)->info->gen >= 6) && \
- ((reg) < 0x40000) && \
- ((reg) != FORCEWAKE))
+ ((reg) < 0x40000) && \
+ ((reg) != FORCEWAKE) && \
+ ((reg) != ECOBUS))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 4a9c1b9..554bef7 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -107,6 +107,7 @@
struct opregion_acpi;
struct opregion_swsci;
struct opregion_asle;
+struct drm_i915_private;
struct intel_opregion {
struct opregion_header *header;
@@ -221,6 +222,8 @@
struct drm_i915_gem_object *obj);
int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
int x, int y);
+ void (*force_wake_get)(struct drm_i915_private *dev_priv);
+ void (*force_wake_put)(struct drm_i915_private *dev_priv);
/* clock updates for mode set */
/* cursor updates */
/* render clock increase/decrease */
@@ -710,6 +713,7 @@
u64 last_count1;
unsigned long last_time1;
+ unsigned long chipset_power;
u64 last_count2;
struct timespec last_time2;
unsigned long gfx_power;
@@ -998,11 +1002,11 @@
extern unsigned int i915_fbpercrtc __always_unused;
extern int i915_panel_ignore_lid __read_mostly;
extern unsigned int i915_powersave __read_mostly;
-extern unsigned int i915_semaphores __read_mostly;
+extern int i915_semaphores __read_mostly;
extern unsigned int i915_lvds_downclock __read_mostly;
extern int i915_panel_use_ssc __read_mostly;
extern int i915_vbt_sdvo_panel_type __read_mostly;
-extern unsigned int i915_enable_rc6 __read_mostly;
+extern int i915_enable_rc6 __read_mostly;
extern int i915_enable_fbc __read_mostly;
extern bool i915_enable_hangcheck __read_mostly;
@@ -1308,6 +1312,11 @@
extern void intel_detect_pch(struct drm_device *dev);
extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
+extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
+
/* overlay */
#ifdef CONFIG_DEBUG_FS
extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
@@ -1352,8 +1361,9 @@
/* We give fast paths for the really cool registers */
#define NEEDS_FORCE_WAKE(dev_priv, reg) \
(((dev_priv)->info->gen >= 6) && \
- ((reg) < 0x40000) && \
- ((reg) != FORCEWAKE))
+ ((reg) < 0x40000) && \
+ ((reg) != FORCEWAKE) && \
+ ((reg) != ECOBUS))
#define __i915_read(x, y) \
u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 60ff1b6..8359dc7 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -2026,13 +2026,8 @@
* to handle this, the waiter on a request often wants an associated
* buffer to have made it to the inactive list, and we would need
* a separate wait queue to handle that.
- *
- * To avoid a recursion with the ilk VT-d workaround (that calls
- * gpu_idle when unbinding objects with interruptible==false) don't
- * retire requests in that case (because it might call unbind if the
- * active list holds the last reference to the object).
*/
- if (ret == 0 && dev_priv->mm.interruptible)
+ if (ret == 0)
i915_gem_retire_requests_ring(ring);
return ret;
diff --git a/drivers/gpu/drm/i915/i915_gem_execbuffer.c b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
index 3693e83..c681dc1 100644
--- a/drivers/gpu/drm/i915/i915_gem_execbuffer.c
+++ b/drivers/gpu/drm/i915/i915_gem_execbuffer.c
@@ -32,6 +32,7 @@
#include "i915_drv.h"
#include "i915_trace.h"
#include "intel_drv.h"
+#include <linux/dma_remapping.h>
struct change_domains {
uint32_t invalidate_domains;
@@ -746,6 +747,22 @@
return 0;
}
+static bool
+intel_enable_semaphores(struct drm_device *dev)
+{
+ if (INTEL_INFO(dev)->gen < 6)
+ return 0;
+
+ if (i915_semaphores >= 0)
+ return i915_semaphores;
+
+ /* Enable semaphores on SNB when IO remapping is off */
+ if (INTEL_INFO(dev)->gen == 6)
+ return !intel_iommu_enabled;
+
+ return 1;
+}
+
static int
i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj,
struct intel_ring_buffer *to)
@@ -758,7 +775,7 @@
return 0;
/* XXX gpu semaphores are implicated in various hard hangs on SNB */
- if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores)
+ if (!intel_enable_semaphores(obj->base.dev))
return i915_gem_object_wait_rendering(obj);
idx = intel_ring_sync_index(from, to);
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index b080cc8..a26d5b0 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -3303,10 +3303,10 @@
/* or SDVOB */
#define HDMIB 0xe1140
#define PORT_ENABLE (1 << 31)
-#define TRANSCODER_A (0)
-#define TRANSCODER_B (1 << 30)
-#define TRANSCODER(pipe) ((pipe) << 30)
-#define TRANSCODER_MASK (1 << 30)
+#define TRANSCODER(pipe) ((pipe) << 30)
+#define TRANSCODER_CPT(pipe) ((pipe) << 29)
+#define TRANSCODER_MASK (1 << 30)
+#define TRANSCODER_MASK_CPT (3 << 29)
#define COLOR_FORMAT_8bpc (0)
#define COLOR_FORMAT_12bpc (3 << 26)
#define SDVOB_HOTPLUG_ENABLE (1 << 23)
@@ -3447,8 +3447,30 @@
#define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22)
#define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22)
+/* IVB */
+#define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22)
+#define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22)
+#define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22)
+#define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22)
+#define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22)
+#define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22)
+#define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x33 <<22)
+
+/* legacy values */
+#define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22)
+#define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22)
+#define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22)
+#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22)
+#define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22)
+
+#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22)
+
#define FORCEWAKE 0xA18C
#define FORCEWAKE_ACK 0x130090
+#define FORCEWAKE_MT 0xa188 /* multi-threaded */
+#define FORCEWAKE_MT_ACK 0x130040
+#define ECOBUS 0xa180
+#define FORCEWAKE_MT_ENABLE (1<<5)
#define GT_FIFO_FREE_ENTRIES 0x120008
#define GT_FIFO_NUM_RESERVED_ENTRIES 20
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index e77a863..d809b03 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -38,8 +38,8 @@
#include "i915_drv.h"
#include "i915_trace.h"
#include "drm_dp_helper.h"
-
#include "drm_crtc_helper.h"
+#include <linux/dma_remapping.h>
#define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
@@ -4670,6 +4670,7 @@
/**
* intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
* @crtc: CRTC structure
+ * @mode: requested mode
*
* A pipe may be connected to one or more outputs. Based on the depth of the
* attached framebuffer, choose a good color depth to use on the pipe.
@@ -4681,13 +4682,15 @@
* HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
* Displays may support a restricted set as well, check EDID and clamp as
* appropriate.
+ * DP may want to dither down to 6bpc to fit larger modes
*
* RETURNS:
* Dithering requirement (i.e. false if display bpc and pipe bpc match,
* true if they don't match).
*/
static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
- unsigned int *pipe_bpp)
+ unsigned int *pipe_bpp,
+ struct drm_display_mode *mode)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4758,6 +4761,11 @@
}
}
+ if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+ DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
+ display_bpc = 6;
+ }
+
/*
* We could just drive the pipe at the highest bpc all the time and
* enable dithering as needed, but that costs bandwidth. So choose
@@ -5019,6 +5027,16 @@
pipeconf &= ~PIPECONF_DOUBLE_WIDE;
}
+ /* default to 8bpc */
+ pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+ if (is_dp) {
+ if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+ pipeconf |= PIPECONF_BPP_6 |
+ PIPECONF_DITHER_EN |
+ PIPECONF_DITHER_TYPE_SP;
+ }
+ }
+
dpll |= DPLL_VCO_ENABLE;
DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
@@ -5480,7 +5498,7 @@
/* determine panel color depth */
temp = I915_READ(PIPECONF(pipe));
temp &= ~PIPE_BPC_MASK;
- dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp);
+ dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
switch (pipe_bpp) {
case 18:
temp |= PIPE_6BPC;
@@ -7189,11 +7207,16 @@
work->old_fb_obj = intel_fb->obj;
INIT_WORK(&work->work, intel_unpin_work_fn);
+ ret = drm_vblank_get(dev, intel_crtc->pipe);
+ if (ret)
+ goto free_work;
+
/* We borrow the event spin lock for protecting unpin_work */
spin_lock_irqsave(&dev->event_lock, flags);
if (intel_crtc->unpin_work) {
spin_unlock_irqrestore(&dev->event_lock, flags);
kfree(work);
+ drm_vblank_put(dev, intel_crtc->pipe);
DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
return -EBUSY;
@@ -7212,10 +7235,6 @@
crtc->fb = fb;
- ret = drm_vblank_get(dev, intel_crtc->pipe);
- if (ret)
- goto cleanup_objs;
-
work->pending_flip_obj = obj;
work->enable_stall_check = true;
@@ -7238,7 +7257,6 @@
cleanup_pending:
atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
-cleanup_objs:
drm_gem_object_unreference(&work->old_fb_obj->base);
drm_gem_object_unreference(&obj->base);
mutex_unlock(&dev->struct_mutex);
@@ -7247,6 +7265,8 @@
intel_crtc->unpin_work = NULL;
spin_unlock_irqrestore(&dev->event_lock, flags);
+ drm_vblank_put(dev, intel_crtc->pipe);
+free_work:
kfree(work);
return ret;
@@ -7887,6 +7907,33 @@
dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
}
+static bool intel_enable_rc6(struct drm_device *dev)
+{
+ /*
+ * Respect the kernel parameter if it is set
+ */
+ if (i915_enable_rc6 >= 0)
+ return i915_enable_rc6;
+
+ /*
+ * Disable RC6 on Ironlake
+ */
+ if (INTEL_INFO(dev)->gen == 5)
+ return 0;
+
+ /*
+ * Enable rc6 on Sandybridge if DMA remapping is disabled
+ */
+ if (INTEL_INFO(dev)->gen == 6) {
+ DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n",
+ intel_iommu_enabled ? "true" : "false",
+ !intel_iommu_enabled ? "en" : "dis");
+ return !intel_iommu_enabled;
+ }
+ DRM_DEBUG_DRIVER("RC6 enabled\n");
+ return 1;
+}
+
void gen6_enable_rps(struct drm_i915_private *dev_priv)
{
u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
@@ -7923,7 +7970,7 @@
I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
- if (i915_enable_rc6)
+ if (intel_enable_rc6(dev_priv->dev))
rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
GEN6_RC_CTL_RC6_ENABLE;
@@ -8372,7 +8419,7 @@
/* rc6 disabled by default due to repeated reports of hanging during
* boot and resume.
*/
- if (!i915_enable_rc6)
+ if (!intel_enable_rc6(dev))
return;
mutex_lock(&dev->struct_mutex);
@@ -8491,6 +8538,28 @@
/* For FIFO watermark updates */
if (HAS_PCH_SPLIT(dev)) {
+ dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
+ dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;
+
+ /* IVB configs may use multi-threaded forcewake */
+ if (IS_IVYBRIDGE(dev)) {
+ u32 ecobus;
+
+ mutex_lock(&dev->struct_mutex);
+ __gen6_gt_force_wake_mt_get(dev_priv);
+ ecobus = I915_READ(ECOBUS);
+ __gen6_gt_force_wake_mt_put(dev_priv);
+ mutex_unlock(&dev->struct_mutex);
+
+ if (ecobus & FORCEWAKE_MT_ENABLE) {
+ DRM_DEBUG_KMS("Using MT version of forcewake\n");
+ dev_priv->display.force_wake_get =
+ __gen6_gt_force_wake_mt_get;
+ dev_priv->display.force_wake_put =
+ __gen6_gt_force_wake_mt_put;
+ }
+ }
+
if (HAS_PCH_IBX(dev))
dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
else if (HAS_PCH_CPT(dev))
diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index 4d0358f..92b041b 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -208,13 +208,15 @@
*/
static int
-intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock)
+intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp)
{
struct drm_crtc *crtc = intel_dp->base.base.crtc;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
int bpp = 24;
- if (intel_crtc)
+ if (check_bpp)
+ bpp = check_bpp;
+ else if (intel_crtc)
bpp = intel_crtc->bpp;
return (pixel_clock * bpp + 9) / 10;
@@ -233,6 +235,7 @@
struct intel_dp *intel_dp = intel_attached_dp(connector);
int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
int max_lanes = intel_dp_max_lane_count(intel_dp);
+ int max_rate, mode_rate;
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
@@ -242,9 +245,17 @@
return MODE_PANEL;
}
- if (intel_dp_link_required(intel_dp, mode->clock)
- > intel_dp_max_data_rate(max_link_clock, max_lanes))
- return MODE_CLOCK_HIGH;
+ mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0);
+ max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+ if (mode_rate > max_rate) {
+ mode_rate = intel_dp_link_required(intel_dp,
+ mode->clock, 18);
+ if (mode_rate > max_rate)
+ return MODE_CLOCK_HIGH;
+ else
+ mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
+ }
if (mode->clock < 10000)
return MODE_CLOCK_LOW;
@@ -362,8 +373,8 @@
* clock divider.
*/
if (is_cpu_edp(intel_dp)) {
- if (IS_GEN6(dev))
- aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */
+ if (IS_GEN6(dev) || IS_GEN7(dev))
+ aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
else
aux_clock_divider = 225; /* eDP input clock at 450Mhz */
} else if (HAS_PCH_SPLIT(dev))
@@ -672,6 +683,7 @@
int lane_count, clock;
int max_lane_count = intel_dp_max_lane_count(intel_dp);
int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
+ int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0;
static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
@@ -689,7 +701,7 @@
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
- if (intel_dp_link_required(intel_dp, mode->clock)
+ if (intel_dp_link_required(intel_dp, mode->clock, bpp)
<= link_avail) {
intel_dp->link_bw = bws[clock];
intel_dp->lane_count = lane_count;
@@ -817,10 +829,11 @@
}
/*
- * There are three kinds of DP registers:
+ * There are four kinds of DP registers:
*
* IBX PCH
- * CPU
+ * SNB CPU
+ * IVB CPU
* CPT PCH
*
* IBX PCH and CPU are the same for almost everything,
@@ -873,7 +886,25 @@
/* Split out the IBX/CPU vs CPT settings */
- if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+ if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+ intel_dp->DP |= DP_SYNC_HS_HIGH;
+ if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+ intel_dp->DP |= DP_SYNC_VS_HIGH;
+ intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
+
+ if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+ intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+ intel_dp->DP |= intel_crtc->pipe << 29;
+
+ /* don't miss out required setting for eDP */
+ intel_dp->DP |= DP_PLL_ENABLE;
+ if (adjusted_mode->clock < 200000)
+ intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+ else
+ intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+ } else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
intel_dp->DP |= intel_dp->color_range;
if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
@@ -1375,34 +1406,59 @@
* These are source-specific values; current Intel hardware supports
* a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
*/
-#define I830_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_800
-#define I830_DP_VOLTAGE_MAX_CPT DP_TRAIN_VOLTAGE_SWING_1200
static uint8_t
-intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+intel_dp_voltage_max(struct intel_dp *intel_dp)
{
- switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
- case DP_TRAIN_VOLTAGE_SWING_400:
- return DP_TRAIN_PRE_EMPHASIS_6;
- case DP_TRAIN_VOLTAGE_SWING_600:
- return DP_TRAIN_PRE_EMPHASIS_6;
- case DP_TRAIN_VOLTAGE_SWING_800:
- return DP_TRAIN_PRE_EMPHASIS_3_5;
- case DP_TRAIN_VOLTAGE_SWING_1200:
- default:
- return DP_TRAIN_PRE_EMPHASIS_0;
+ struct drm_device *dev = intel_dp->base.base.dev;
+
+ if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
+ return DP_TRAIN_VOLTAGE_SWING_800;
+ else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ return DP_TRAIN_VOLTAGE_SWING_1200;
+ else
+ return DP_TRAIN_VOLTAGE_SWING_800;
+}
+
+static uint8_t
+intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
+{
+ struct drm_device *dev = intel_dp->base.base.dev;
+
+ if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
+ } else {
+ switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+ case DP_TRAIN_VOLTAGE_SWING_400:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_600:
+ return DP_TRAIN_PRE_EMPHASIS_6;
+ case DP_TRAIN_VOLTAGE_SWING_800:
+ return DP_TRAIN_PRE_EMPHASIS_3_5;
+ case DP_TRAIN_VOLTAGE_SWING_1200:
+ default:
+ return DP_TRAIN_PRE_EMPHASIS_0;
+ }
}
}
static void
intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
{
- struct drm_device *dev = intel_dp->base.base.dev;
uint8_t v = 0;
uint8_t p = 0;
int lane;
uint8_t *adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
- int voltage_max;
+ uint8_t voltage_max;
+ uint8_t preemph_max;
for (lane = 0; lane < intel_dp->lane_count; lane++) {
uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
@@ -1414,15 +1470,13 @@
p = this_p;
}
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
- voltage_max = I830_DP_VOLTAGE_MAX_CPT;
- else
- voltage_max = I830_DP_VOLTAGE_MAX;
+ voltage_max = intel_dp_voltage_max(intel_dp);
if (v >= voltage_max)
v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
- if (p >= intel_dp_pre_emphasis_max(v))
- p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+ preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
+ if (p >= preemph_max)
+ p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
for (lane = 0; lane < 4; lane++)
intel_dp->train_set[lane] = v | p;
@@ -1494,6 +1548,37 @@
}
}
+/* Gen7's DP voltage swing and pre-emphasis control */
+static uint32_t
+intel_gen7_edp_signal_levels(uint8_t train_set)
+{
+ int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+ DP_TRAIN_PRE_EMPHASIS_MASK);
+ switch (signal_levels) {
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
+ return EDP_LINK_TRAIN_400MV_0DB_IVB;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return EDP_LINK_TRAIN_400MV_3_5DB_IVB;
+ case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
+ return EDP_LINK_TRAIN_400MV_6DB_IVB;
+
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+ return EDP_LINK_TRAIN_600MV_0DB_IVB;
+ case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return EDP_LINK_TRAIN_600MV_3_5DB_IVB;
+
+ case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
+ return EDP_LINK_TRAIN_800MV_0DB_IVB;
+ case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+ return EDP_LINK_TRAIN_800MV_3_5DB_IVB;
+
+ default:
+ DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+ "0x%x\n", signal_levels);
+ return EDP_LINK_TRAIN_500MV_0DB_IVB;
+ }
+}
+
static uint8_t
intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
int lane)
@@ -1599,7 +1684,8 @@
DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
DP &= ~DP_LINK_TRAIN_MASK_CPT;
else
DP &= ~DP_LINK_TRAIN_MASK;
@@ -1613,7 +1699,11 @@
uint8_t link_status[DP_LINK_STATUS_SIZE];
uint32_t signal_levels;
- if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+
+ if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+ DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
@@ -1622,7 +1712,7 @@
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_1;
@@ -1703,7 +1793,10 @@
break;
}
- if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+ if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+ signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+ DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+ } else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
@@ -1711,7 +1804,7 @@
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
else
reg = DP | DP_LINK_TRAIN_PAT_2;
@@ -1752,7 +1845,7 @@
++tries;
}
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
reg = DP | DP_LINK_TRAIN_OFF;
@@ -1782,7 +1875,7 @@
udelay(100);
}
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) {
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
DP &= ~DP_LINK_TRAIN_MASK_CPT;
I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
} else {
@@ -1794,7 +1887,7 @@
msleep(17);
if (is_edp(intel_dp)) {
- if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+ if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
DP |= DP_LINK_TRAIN_OFF_CPT;
else
DP |= DP_LINK_TRAIN_OFF;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index bd9a604..a1b4343 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -110,6 +110,7 @@
/* drm_display_mode->private_flags */
#define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
#define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
+#define INTEL_MODE_DP_FORCE_6BPC (0x10)
static inline void
intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 42f165a..e441911 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -715,6 +715,14 @@
DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
},
},
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Asus AT5NM10T-I",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+ DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
+ },
+ },
{ } /* terminating entry */
};
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 21f60b7..04d79fd 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -178,13 +178,10 @@
if (HAS_PCH_SPLIT(dev)) {
max >>= 16;
} else {
- if (IS_PINEVIEW(dev)) {
+ if (INTEL_INFO(dev)->gen < 4)
max >>= 17;
- } else {
+ else
max >>= 16;
- if (INTEL_INFO(dev)->gen < 4)
- max &= ~1;
- }
if (is_backlight_combination_mode(dev))
max *= 0xff;
@@ -203,13 +200,12 @@
val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
} else {
val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
- if (IS_PINEVIEW(dev))
+ if (INTEL_INFO(dev)->gen < 4)
val >>= 1;
if (is_backlight_combination_mode(dev)) {
u8 lbpc;
- val &= ~1;
pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
val *= lbpc;
}
@@ -246,11 +242,9 @@
}
tmp = I915_READ(BLC_PWM_CTL);
- if (IS_PINEVIEW(dev)) {
- tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
+ if (INTEL_INFO(dev)->gen < 4)
level <<= 1;
- } else
- tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+ tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
I915_WRITE(BLC_PWM_CTL, tmp | level);
}
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 3003fb2..f7b9268 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -50,6 +50,7 @@
#define IS_TMDS(c) (c->output_flag & SDVO_TMDS_MASK)
#define IS_LVDS(c) (c->output_flag & SDVO_LVDS_MASK)
#define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK))
+#define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK))
static const char *tv_format_names[] = {
@@ -1086,8 +1087,12 @@
}
sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
}
- if (intel_crtc->pipe == 1)
- sdvox |= SDVO_PIPE_B_SELECT;
+
+ if (INTEL_PCH_TYPE(dev) >= PCH_CPT)
+ sdvox |= TRANSCODER_CPT(intel_crtc->pipe);
+ else
+ sdvox |= TRANSCODER(intel_crtc->pipe);
+
if (intel_sdvo->has_hdmi_audio)
sdvox |= SDVO_AUDIO_ENABLE;
@@ -1314,6 +1319,18 @@
return status;
}
+static bool
+intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo,
+ struct edid *edid)
+{
+ bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+ bool connector_is_digital = !!IS_DIGITAL(sdvo);
+
+ DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n",
+ connector_is_digital, monitor_is_digital);
+ return connector_is_digital == monitor_is_digital;
+}
+
static enum drm_connector_status
intel_sdvo_detect(struct drm_connector *connector, bool force)
{
@@ -1358,10 +1375,12 @@
if (edid == NULL)
edid = intel_sdvo_get_analog_edid(connector);
if (edid != NULL) {
- if (edid->input & DRM_EDID_INPUT_DIGITAL)
- ret = connector_status_disconnected;
- else
+ if (intel_sdvo_connector_matches_edid(intel_sdvo_connector,
+ edid))
ret = connector_status_connected;
+ else
+ ret = connector_status_disconnected;
+
connector->display_info.raw_edid = NULL;
kfree(edid);
} else
@@ -1402,11 +1421,8 @@
edid = intel_sdvo_get_analog_edid(connector);
if (edid != NULL) {
- struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
- bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
- bool connector_is_digital = !!IS_TMDS(intel_sdvo_connector);
-
- if (connector_is_digital == monitor_is_digital) {
+ if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector),
+ edid)) {
drm_mode_connector_update_edid_property(connector, edid);
drm_add_edid_modes(connector, edid);
}
diff --git a/drivers/hwmon/jz4740-hwmon.c b/drivers/hwmon/jz4740-hwmon.c
index 7a48b1e..5253d23 100644
--- a/drivers/hwmon/jz4740-hwmon.c
+++ b/drivers/hwmon/jz4740-hwmon.c
@@ -59,7 +59,7 @@
{
struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
struct completion *completion = &hwmon->read_completion;
- unsigned long t;
+ long t;
unsigned long val;
int ret;
@@ -203,7 +203,7 @@
return 0;
}
-struct platform_driver jz4740_hwmon_driver = {
+static struct platform_driver jz4740_hwmon_driver = {
.probe = jz4740_hwmon_probe,
.remove = __devexit_p(jz4740_hwmon_remove),
.driver = {
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 46b6500..6381604 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -558,7 +558,7 @@
.functionality = tegra_i2c_func,
};
-static int tegra_i2c_probe(struct platform_device *pdev)
+static int __devinit tegra_i2c_probe(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev;
struct tegra_i2c_platform_data *pdata = pdev->dev.platform_data;
@@ -636,7 +636,10 @@
i2c_dev->bus_clk_rate = be32_to_cpup(prop);
}
- if (pdev->id == 3)
+ if (pdev->dev.of_node)
+ i2c_dev->is_dvc = of_device_is_compatible(pdev->dev.of_node,
+ "nvidia,tegra20-i2c-dvc");
+ else if (pdev->id == 3)
i2c_dev->is_dvc = 1;
init_completion(&i2c_dev->msg_complete);
@@ -690,7 +693,7 @@
return ret;
}
-static int tegra_i2c_remove(struct platform_device *pdev)
+static int __devexit tegra_i2c_remove(struct platform_device *pdev)
{
struct tegra_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
i2c_del_adapter(&i2c_dev->adapter);
@@ -742,6 +745,7 @@
/* Match table for of_platform binding */
static const struct of_device_id tegra_i2c_of_match[] __devinitconst = {
{ .compatible = "nvidia,tegra20-i2c", },
+ { .compatible = "nvidia,tegra20-i2c-dvc", },
{},
};
MODULE_DEVICE_TABLE(of, tegra_i2c_of_match);
diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c
index f689f49..8a0060c 100644
--- a/drivers/input/keyboard/samsung-keypad.c
+++ b/drivers/input/keyboard/samsung-keypad.c
@@ -21,6 +21,8 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
#include <linux/sched.h>
#include <plat/keypad.h>
@@ -68,31 +70,26 @@
wait_queue_head_t wait;
bool stopped;
int irq;
+ enum samsung_keypad_type type;
unsigned int row_shift;
unsigned int rows;
unsigned int cols;
unsigned int row_state[SAMSUNG_MAX_COLS];
+#ifdef CONFIG_OF
+ int row_gpios[SAMSUNG_MAX_ROWS];
+ int col_gpios[SAMSUNG_MAX_COLS];
+#endif
unsigned short keycodes[];
};
-static int samsung_keypad_is_s5pv210(struct device *dev)
-{
- struct platform_device *pdev = to_platform_device(dev);
- enum samsung_keypad_type type =
- platform_get_device_id(pdev)->driver_data;
-
- return type == KEYPAD_TYPE_S5PV210;
-}
-
static void samsung_keypad_scan(struct samsung_keypad *keypad,
unsigned int *row_state)
{
- struct device *dev = keypad->input_dev->dev.parent;
unsigned int col;
unsigned int val;
for (col = 0; col < keypad->cols; col++) {
- if (samsung_keypad_is_s5pv210(dev)) {
+ if (keypad->type == KEYPAD_TYPE_S5PV210) {
val = S5PV210_KEYIFCOLEN_MASK;
val &= ~(1 << col) << 8;
} else {
@@ -235,6 +232,126 @@
samsung_keypad_stop(keypad);
}
+#ifdef CONFIG_OF
+static struct samsung_keypad_platdata *samsung_keypad_parse_dt(
+ struct device *dev)
+{
+ struct samsung_keypad_platdata *pdata;
+ struct matrix_keymap_data *keymap_data;
+ uint32_t *keymap, num_rows = 0, num_cols = 0;
+ struct device_node *np = dev->of_node, *key_np;
+ unsigned int key_count = 0;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "could not allocate memory for platform data\n");
+ return NULL;
+ }
+
+ of_property_read_u32(np, "samsung,keypad-num-rows", &num_rows);
+ of_property_read_u32(np, "samsung,keypad-num-columns", &num_cols);
+ if (!num_rows || !num_cols) {
+ dev_err(dev, "number of keypad rows/columns not specified\n");
+ return NULL;
+ }
+ pdata->rows = num_rows;
+ pdata->cols = num_cols;
+
+ keymap_data = devm_kzalloc(dev, sizeof(*keymap_data), GFP_KERNEL);
+ if (!keymap_data) {
+ dev_err(dev, "could not allocate memory for keymap data\n");
+ return NULL;
+ }
+ pdata->keymap_data = keymap_data;
+
+ for_each_child_of_node(np, key_np)
+ key_count++;
+
+ keymap_data->keymap_size = key_count;
+ keymap = devm_kzalloc(dev, sizeof(uint32_t) * key_count, GFP_KERNEL);
+ if (!keymap) {
+ dev_err(dev, "could not allocate memory for keymap\n");
+ return NULL;
+ }
+ keymap_data->keymap = keymap;
+
+ for_each_child_of_node(np, key_np) {
+ u32 row, col, key_code;
+ of_property_read_u32(key_np, "keypad,row", &row);
+ of_property_read_u32(key_np, "keypad,column", &col);
+ of_property_read_u32(key_np, "linux,code", &key_code);
+ *keymap++ = KEY(row, col, key_code);
+ }
+
+ if (of_get_property(np, "linux,input-no-autorepeat", NULL))
+ pdata->no_autorepeat = true;
+ if (of_get_property(np, "linux,input-wakeup", NULL))
+ pdata->wakeup = true;
+
+ return pdata;
+}
+
+static void samsung_keypad_parse_dt_gpio(struct device *dev,
+ struct samsung_keypad *keypad)
+{
+ struct device_node *np = dev->of_node;
+ int gpio, ret, row, col;
+
+ for (row = 0; row < keypad->rows; row++) {
+ gpio = of_get_named_gpio(np, "row-gpios", row);
+ keypad->row_gpios[row] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad row[%d]: invalid gpio %d\n",
+ row, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-row");
+ if (ret)
+ dev_err(dev, "keypad row[%d] gpio request failed\n",
+ row);
+ }
+
+ for (col = 0; col < keypad->cols; col++) {
+ gpio = of_get_named_gpio(np, "col-gpios", col);
+ keypad->col_gpios[col] = gpio;
+ if (!gpio_is_valid(gpio)) {
+ dev_err(dev, "keypad column[%d]: invalid gpio %d\n",
+ col, gpio);
+ continue;
+ }
+
+ ret = gpio_request(gpio, "keypad-col");
+ if (ret)
+ dev_err(dev, "keypad column[%d] gpio request failed\n",
+ col);
+ }
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < keypad->rows; cnt++)
+ if (gpio_is_valid(keypad->row_gpios[cnt]))
+ gpio_free(keypad->row_gpios[cnt]);
+
+ for (cnt = 0; cnt < keypad->cols; cnt++)
+ if (gpio_is_valid(keypad->col_gpios[cnt]))
+ gpio_free(keypad->col_gpios[cnt]);
+}
+#else
+static
+struct samsung_keypad_platdata *samsung_keypad_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+
+static void samsung_keypad_dt_gpio_free(struct samsung_keypad *keypad)
+{
+}
+#endif
+
static int __devinit samsung_keypad_probe(struct platform_device *pdev)
{
const struct samsung_keypad_platdata *pdata;
@@ -246,7 +363,10 @@
unsigned int keymap_size;
int error;
- pdata = pdev->dev.platform_data;
+ if (pdev->dev.of_node)
+ pdata = samsung_keypad_parse_dt(&pdev->dev);
+ else
+ pdata = pdev->dev.platform_data;
if (!pdata) {
dev_err(&pdev->dev, "no platform data defined\n");
return -EINVAL;
@@ -303,6 +423,16 @@
keypad->cols = pdata->cols;
init_waitqueue_head(&keypad->wait);
+ if (pdev->dev.of_node) {
+#ifdef CONFIG_OF
+ samsung_keypad_parse_dt_gpio(&pdev->dev, keypad);
+ keypad->type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s5pv210-keypad");
+#endif
+ } else {
+ keypad->type = platform_get_device_id(pdev)->driver_data;
+ }
+
input_dev->name = pdev->name;
input_dev->id.bustype = BUS_HOST;
input_dev->dev.parent = &pdev->dev;
@@ -343,12 +473,19 @@
device_init_wakeup(&pdev->dev, pdata->wakeup);
platform_set_drvdata(pdev, keypad);
+
+ if (pdev->dev.of_node) {
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data->keymap);
+ devm_kfree(&pdev->dev, (void *)pdata->keymap_data);
+ devm_kfree(&pdev->dev, (void *)pdata);
+ }
return 0;
err_free_irq:
free_irq(keypad->irq, keypad);
err_put_clk:
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
err_unmap_base:
iounmap(keypad->base);
err_free_mem:
@@ -374,6 +511,7 @@
free_irq(keypad->irq, keypad);
clk_put(keypad->clk);
+ samsung_keypad_dt_gpio_free(keypad);
iounmap(keypad->base);
kfree(keypad);
@@ -447,6 +585,17 @@
};
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id samsung_keypad_dt_match[] = {
+ { .compatible = "samsung,s3c6410-keypad" },
+ { .compatible = "samsung,s5pv210-keypad" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_keypad_dt_match);
+#else
+#define samsung_keypad_dt_match NULL
+#endif
+
static struct platform_device_id samsung_keypad_driver_ids[] = {
{
.name = "samsung-keypad",
@@ -465,6 +614,7 @@
.driver = {
.name = "samsung-keypad",
.owner = THIS_MODULE,
+ .of_match_table = samsung_keypad_dt_match,
#ifdef CONFIG_PM
.pm = &samsung_keypad_pm_ops,
#endif
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
index f6328c0..0a707bb 100644
--- a/drivers/input/touchscreen/zylonite-wm97xx.c
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -22,6 +22,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -192,8 +193,8 @@
else
gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
- wm->pen_irq = IRQ_GPIO(gpio_touch_irq);
- irq_set_irq_type(IRQ_GPIO(gpio_touch_irq), IRQ_TYPE_EDGE_BOTH);
+ wm->pen_irq = gpio_to_irq(gpio_touch_irq);
+ irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
WM97XX_GPIO_POL_HIGH,
diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index a004c39..bdc447f 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -405,6 +405,9 @@
int dmar_disabled = 1;
#endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/
+int intel_iommu_enabled = 0;
+EXPORT_SYMBOL_GPL(intel_iommu_enabled);
+
static int dmar_map_gfx = 1;
static int dmar_forcedac;
static int intel_iommu_strict;
@@ -3647,6 +3650,8 @@
bus_register_notifier(&pci_bus_type, &device_nb);
+ intel_iommu_enabled = 1;
+
return 0;
}
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 86e1458..3f565ef 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -27,8 +27,9 @@
#include <linux/spinlock.h>
#include <linux/gpio.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
-#define USBHS_DRIVER_NAME "usbhs-omap"
+#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
@@ -147,9 +148,6 @@
struct usbhs_hcd_omap {
- struct clk *usbhost_ick;
- struct clk *usbhost_hs_fck;
- struct clk *usbhost_fs_fck;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_fck;
@@ -159,8 +157,7 @@
struct clk *usbhost_p2_fck;
struct clk *usbtll_p2_fck;
struct clk *init_60m_fclk;
- struct clk *usbtll_fck;
- struct clk *usbtll_ick;
+ struct clk *ehci_logic_fck;
void __iomem *uhh_base;
void __iomem *tll_base;
@@ -169,7 +166,6 @@
u32 usbhs_rev;
spinlock_t lock;
- int count;
};
/*-------------------------------------------------------------------------*/
@@ -319,269 +315,6 @@
return ret;
}
-/**
- * usbhs_omap_probe - initialize TI-based HCDs
- *
- * Allocates basic resources for this USB host controller.
- */
-static int __devinit usbhs_omap_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct usbhs_omap_platform_data *pdata = dev->platform_data;
- struct usbhs_hcd_omap *omap;
- struct resource *res;
- int ret = 0;
- int i;
-
- if (!pdata) {
- dev_err(dev, "Missing platform data\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- omap = kzalloc(sizeof(*omap), GFP_KERNEL);
- if (!omap) {
- dev_err(dev, "Memory allocation failed\n");
- ret = -ENOMEM;
- goto end_probe;
- }
-
- spin_lock_init(&omap->lock);
-
- for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
- omap->platdata.port_mode[i] = pdata->port_mode[i];
-
- omap->platdata.ehci_data = pdata->ehci_data;
- omap->platdata.ohci_data = pdata->ohci_data;
-
- omap->usbhost_ick = clk_get(dev, "usbhost_ick");
- if (IS_ERR(omap->usbhost_ick)) {
- ret = PTR_ERR(omap->usbhost_ick);
- dev_err(dev, "usbhost_ick failed error:%d\n", ret);
- goto err_end;
- }
-
- omap->usbhost_hs_fck = clk_get(dev, "hs_fck");
- if (IS_ERR(omap->usbhost_hs_fck)) {
- ret = PTR_ERR(omap->usbhost_hs_fck);
- dev_err(dev, "usbhost_hs_fck failed error:%d\n", ret);
- goto err_usbhost_ick;
- }
-
- omap->usbhost_fs_fck = clk_get(dev, "fs_fck");
- if (IS_ERR(omap->usbhost_fs_fck)) {
- ret = PTR_ERR(omap->usbhost_fs_fck);
- dev_err(dev, "usbhost_fs_fck failed error:%d\n", ret);
- goto err_usbhost_hs_fck;
- }
-
- omap->usbtll_fck = clk_get(dev, "usbtll_fck");
- if (IS_ERR(omap->usbtll_fck)) {
- ret = PTR_ERR(omap->usbtll_fck);
- dev_err(dev, "usbtll_fck failed error:%d\n", ret);
- goto err_usbhost_fs_fck;
- }
-
- omap->usbtll_ick = clk_get(dev, "usbtll_ick");
- if (IS_ERR(omap->usbtll_ick)) {
- ret = PTR_ERR(omap->usbtll_ick);
- dev_err(dev, "usbtll_ick failed error:%d\n", ret);
- goto err_usbtll_fck;
- }
-
- omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
- if (IS_ERR(omap->utmi_p1_fck)) {
- ret = PTR_ERR(omap->utmi_p1_fck);
- dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
- goto err_usbtll_ick;
- }
-
- omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
- if (IS_ERR(omap->xclk60mhsp1_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp1_ck);
- dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
- goto err_utmi_p1_fck;
- }
-
- omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
- if (IS_ERR(omap->utmi_p2_fck)) {
- ret = PTR_ERR(omap->utmi_p2_fck);
- dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
- goto err_xclk60mhsp1_ck;
- }
-
- omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
- if (IS_ERR(omap->xclk60mhsp2_ck)) {
- ret = PTR_ERR(omap->xclk60mhsp2_ck);
- dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
- goto err_utmi_p2_fck;
- }
-
- omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
- if (IS_ERR(omap->usbhost_p1_fck)) {
- ret = PTR_ERR(omap->usbhost_p1_fck);
- dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
- goto err_xclk60mhsp2_ck;
- }
-
- omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
- if (IS_ERR(omap->usbtll_p1_fck)) {
- ret = PTR_ERR(omap->usbtll_p1_fck);
- dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
- goto err_usbhost_p1_fck;
- }
-
- omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
- if (IS_ERR(omap->usbhost_p2_fck)) {
- ret = PTR_ERR(omap->usbhost_p2_fck);
- dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
- goto err_usbtll_p1_fck;
- }
-
- omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
- if (IS_ERR(omap->usbtll_p2_fck)) {
- ret = PTR_ERR(omap->usbtll_p2_fck);
- dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
- goto err_usbhost_p2_fck;
- }
-
- omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
- if (IS_ERR(omap->init_60m_fclk)) {
- ret = PTR_ERR(omap->init_60m_fclk);
- dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
- goto err_usbtll_p2_fck;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_init_60m_fclk;
- }
-
- omap->uhh_base = ioremap(res->start, resource_size(res));
- if (!omap->uhh_base) {
- dev_err(dev, "UHH ioremap failed\n");
- ret = -ENOMEM;
- goto err_init_60m_fclk;
- }
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
- if (!res) {
- dev_err(dev, "UHH EHCI get resource failed\n");
- ret = -ENODEV;
- goto err_tll;
- }
-
- omap->tll_base = ioremap(res->start, resource_size(res));
- if (!omap->tll_base) {
- dev_err(dev, "TLL ioremap failed\n");
- ret = -ENOMEM;
- goto err_tll;
- }
-
- platform_set_drvdata(pdev, omap);
-
- ret = omap_usbhs_alloc_children(pdev);
- if (ret) {
- dev_err(dev, "omap_usbhs_alloc_children failed\n");
- goto err_alloc;
- }
-
- goto end_probe;
-
-err_alloc:
- iounmap(omap->tll_base);
-
-err_tll:
- iounmap(omap->uhh_base);
-
-err_init_60m_fclk:
- clk_put(omap->init_60m_fclk);
-
-err_usbtll_p2_fck:
- clk_put(omap->usbtll_p2_fck);
-
-err_usbhost_p2_fck:
- clk_put(omap->usbhost_p2_fck);
-
-err_usbtll_p1_fck:
- clk_put(omap->usbtll_p1_fck);
-
-err_usbhost_p1_fck:
- clk_put(omap->usbhost_p1_fck);
-
-err_xclk60mhsp2_ck:
- clk_put(omap->xclk60mhsp2_ck);
-
-err_utmi_p2_fck:
- clk_put(omap->utmi_p2_fck);
-
-err_xclk60mhsp1_ck:
- clk_put(omap->xclk60mhsp1_ck);
-
-err_utmi_p1_fck:
- clk_put(omap->utmi_p1_fck);
-
-err_usbtll_ick:
- clk_put(omap->usbtll_ick);
-
-err_usbtll_fck:
- clk_put(omap->usbtll_fck);
-
-err_usbhost_fs_fck:
- clk_put(omap->usbhost_fs_fck);
-
-err_usbhost_hs_fck:
- clk_put(omap->usbhost_hs_fck);
-
-err_usbhost_ick:
- clk_put(omap->usbhost_ick);
-
-err_end:
- kfree(omap);
-
-end_probe:
- return ret;
-}
-
-/**
- * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
- * @pdev: USB Host Controller being removed
- *
- * Reverses the effect of usbhs_omap_probe().
- */
-static int __devexit usbhs_omap_remove(struct platform_device *pdev)
-{
- struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
-
- if (omap->count != 0) {
- dev_err(&pdev->dev,
- "Either EHCI or OHCI is still using usbhs core\n");
- return -EBUSY;
- }
-
- iounmap(omap->tll_base);
- iounmap(omap->uhh_base);
- clk_put(omap->init_60m_fclk);
- clk_put(omap->usbtll_p2_fck);
- clk_put(omap->usbhost_p2_fck);
- clk_put(omap->usbtll_p1_fck);
- clk_put(omap->usbhost_p1_fck);
- clk_put(omap->xclk60mhsp2_ck);
- clk_put(omap->utmi_p2_fck);
- clk_put(omap->xclk60mhsp1_ck);
- clk_put(omap->utmi_p1_fck);
- clk_put(omap->usbtll_ick);
- clk_put(omap->usbtll_fck);
- clk_put(omap->usbhost_fs_fck);
- clk_put(omap->usbhost_hs_fck);
- clk_put(omap->usbhost_ick);
- kfree(omap);
-
- return 0;
-}
-
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
@@ -689,30 +422,85 @@
}
}
-static int usbhs_enable(struct device *dev)
+static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- int ret = 0;
- unsigned long timeout;
- unsigned reg;
+ unsigned long flags;
- dev_dbg(dev, "starting TI HSUSB Controller\n");
+ dev_dbg(dev, "usbhs_runtime_resume\n");
+
if (!pdata) {
dev_dbg(dev, "missing platform_data\n");
return -ENODEV;
}
spin_lock_irqsave(&omap->lock, flags);
- if (omap->count > 0)
- goto end_count;
- clk_enable(omap->usbhost_ick);
- clk_enable(omap->usbhost_hs_fck);
- clk_enable(omap->usbhost_fs_fck);
- clk_enable(omap->usbtll_fck);
- clk_enable(omap->usbtll_ick);
+ if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+ clk_enable(omap->ehci_logic_fck);
+
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_enable(omap->usbhost_p1_fck);
+ clk_enable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_enable(omap->usbhost_p2_fck);
+ clk_enable(omap->usbtll_p2_fck);
+ }
+ clk_enable(omap->utmi_p1_fck);
+ clk_enable(omap->utmi_p2_fck);
+
+ spin_unlock_irqrestore(&omap->lock, flags);
+
+ return 0;
+}
+
+static int usbhs_runtime_suspend(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags;
+
+ dev_dbg(dev, "usbhs_runtime_suspend\n");
+
+ if (!pdata) {
+ dev_dbg(dev, "missing platform_data\n");
+ return -ENODEV;
+ }
+
+ spin_lock_irqsave(&omap->lock, flags);
+
+ if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ clk_disable(omap->usbhost_p1_fck);
+ clk_disable(omap->usbtll_p1_fck);
+ }
+ if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ clk_disable(omap->usbhost_p2_fck);
+ clk_disable(omap->usbtll_p2_fck);
+ }
+ clk_disable(omap->utmi_p2_fck);
+ clk_disable(omap->utmi_p1_fck);
+
+ if (omap->ehci_logic_fck && !IS_ERR(omap->ehci_logic_fck))
+ clk_disable(omap->ehci_logic_fck);
+
+ spin_unlock_irqrestore(&omap->lock, flags);
+
+ return 0;
+}
+
+static void omap_usbhs_init(struct device *dev)
+{
+ struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
+ struct usbhs_omap_platform_data *pdata = &omap->platdata;
+ unsigned long flags;
+ unsigned reg;
+
+ dev_dbg(dev, "starting TI HSUSB Controller\n");
+
+ pm_runtime_get_sync(dev);
+ spin_lock_irqsave(&omap->lock, flags);
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0])) {
@@ -736,50 +524,6 @@
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
dev_dbg(dev, "OMAP UHH_REVISION 0x%x\n", omap->usbhs_rev);
- /* perform TLL soft reset, and wait until reset is complete */
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
- OMAP_USBTLL_SYSCONFIG_SOFTRESET);
-
- /* Wait for TLL reset to complete */
- timeout = jiffies + msecs_to_jiffies(1000);
- while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
- & OMAP_USBTLL_SYSSTATUS_RESETDONE)) {
- cpu_relax();
-
- if (time_after(jiffies, timeout)) {
- dev_dbg(dev, "operation timed out\n");
- ret = -EINVAL;
- goto err_tll;
- }
- }
-
- dev_dbg(dev, "TLL RESET DONE\n");
-
- /* (1<<3) = no idle mode only for initial debugging */
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
- OMAP_USBTLL_SYSCONFIG_ENAWAKEUP |
- OMAP_USBTLL_SYSCONFIG_SIDLEMODE |
- OMAP_USBTLL_SYSCONFIG_AUTOIDLE);
-
- /* Put UHH in NoIdle/NoStandby mode */
- reg = usbhs_read(omap->uhh_base, OMAP_UHH_SYSCONFIG);
- if (is_omap_usbhs_rev1(omap)) {
- reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE);
- reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
-
-
- } else if (is_omap_usbhs_rev2(omap)) {
- reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
- reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
- reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
- reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
- }
-
- usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
-
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
@@ -825,49 +569,6 @@
reg &= ~OMAP4_P1_MODE_CLEAR;
reg &= ~OMAP4_P2_MODE_CLEAR;
- if (is_ehci_phy_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->xclk60mhsp1_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
- ret = clk_set_parent(omap->utmi_p1_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p1_fck);
- clk_enable(omap->usbtll_p1_fck);
- }
-
- if (is_ehci_phy_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->xclk60mhsp2_ck);
- if (ret != 0) {
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
- ret = clk_set_parent(omap->utmi_p2_fck,
- omap->init_60m_fclk);
- if (ret != 0) {
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
- goto err_tll;
- }
- clk_enable(omap->usbhost_p2_fck);
- clk_enable(omap->usbtll_p2_fck);
- }
-
- clk_enable(omap->utmi_p1_fck);
- clk_enable(omap->utmi_p2_fck);
-
if (is_ehci_tll_mode(pdata->port_mode[0]) ||
(is_ohci_port(pdata->port_mode[0])))
reg |= OMAP4_P1_MODE_TLL;
@@ -913,106 +614,14 @@
(pdata->ehci_data->reset_gpio_port[1], 1);
}
-end_count:
- omap->count++;
spin_unlock_irqrestore(&omap->lock, flags);
- return 0;
-
-err_tll:
- if (pdata->ehci_data->phy_reset) {
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
- gpio_free(pdata->ehci_data->reset_gpio_port[0]);
-
- if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
- gpio_free(pdata->ehci_data->reset_gpio_port[1]);
- }
-
- clk_disable(omap->usbtll_ick);
- clk_disable(omap->usbtll_fck);
- clk_disable(omap->usbhost_fs_fck);
- clk_disable(omap->usbhost_hs_fck);
- clk_disable(omap->usbhost_ick);
- spin_unlock_irqrestore(&omap->lock, flags);
- return ret;
+ pm_runtime_put_sync(dev);
}
-static void usbhs_disable(struct device *dev)
+static void omap_usbhs_deinit(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = &omap->platdata;
- unsigned long flags = 0;
- unsigned long timeout;
-
- dev_dbg(dev, "stopping TI HSUSB Controller\n");
-
- spin_lock_irqsave(&omap->lock, flags);
-
- if (omap->count == 0)
- goto end_disble;
-
- omap->count--;
-
- if (omap->count != 0)
- goto end_disble;
-
- /* Reset OMAP modules for insmod/rmmod to work */
- usbhs_write(omap->uhh_base, OMAP_UHH_SYSCONFIG,
- is_omap_usbhs_rev2(omap) ?
- OMAP4_UHH_SYSCONFIG_SOFTRESET :
- OMAP_UHH_SYSCONFIG_SOFTRESET);
-
- timeout = jiffies + msecs_to_jiffies(100);
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
-
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
- }
-
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 1))) {
- cpu_relax();
-
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
- }
-
- while (!(usbhs_read(omap->uhh_base, OMAP_UHH_SYSSTATUS)
- & (1 << 2))) {
- cpu_relax();
-
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
- }
-
- usbhs_write(omap->tll_base, OMAP_USBTLL_SYSCONFIG, (1 << 1));
-
- while (!(usbhs_read(omap->tll_base, OMAP_USBTLL_SYSSTATUS)
- & (1 << 0))) {
- cpu_relax();
-
- if (time_after(jiffies, timeout))
- dev_dbg(dev, "operation timed out\n");
- }
-
- if (is_omap_usbhs_rev2(omap)) {
- if (is_ehci_tll_mode(pdata->port_mode[0]))
- clk_disable(omap->usbtll_p1_fck);
- if (is_ehci_tll_mode(pdata->port_mode[1]))
- clk_disable(omap->usbtll_p2_fck);
- clk_disable(omap->utmi_p2_fck);
- clk_disable(omap->utmi_p1_fck);
- }
-
- clk_disable(omap->usbtll_ick);
- clk_disable(omap->usbtll_fck);
- clk_disable(omap->usbhost_fs_fck);
- clk_disable(omap->usbhost_hs_fck);
- clk_disable(omap->usbhost_ick);
-
- /* The gpio_free migh sleep; so unlock the spinlock */
- spin_unlock_irqrestore(&omap->lock, flags);
if (pdata->ehci_data->phy_reset) {
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
@@ -1021,28 +630,272 @@
if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
gpio_free(pdata->ehci_data->reset_gpio_port[1]);
}
- return;
-
-end_disble:
- spin_unlock_irqrestore(&omap->lock, flags);
}
-int omap_usbhs_enable(struct device *dev)
+
+/**
+ * usbhs_omap_probe - initialize TI-based HCDs
+ *
+ * Allocates basic resources for this USB host controller.
+ */
+static int __devinit usbhs_omap_probe(struct platform_device *pdev)
{
- return usbhs_enable(dev->parent);
-}
-EXPORT_SYMBOL_GPL(omap_usbhs_enable);
+ struct device *dev = &pdev->dev;
+ struct usbhs_omap_platform_data *pdata = dev->platform_data;
+ struct usbhs_hcd_omap *omap;
+ struct resource *res;
+ int ret = 0;
+ int i;
-void omap_usbhs_disable(struct device *dev)
-{
- usbhs_disable(dev->parent);
+ if (!pdata) {
+ dev_err(dev, "Missing platform data\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
+
+ omap = kzalloc(sizeof(*omap), GFP_KERNEL);
+ if (!omap) {
+ dev_err(dev, "Memory allocation failed\n");
+ ret = -ENOMEM;
+ goto end_probe;
+ }
+
+ spin_lock_init(&omap->lock);
+
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ omap->platdata.port_mode[i] = pdata->port_mode[i];
+
+ omap->platdata.ehci_data = pdata->ehci_data;
+ omap->platdata.ohci_data = pdata->ohci_data;
+
+ pm_runtime_enable(dev);
+
+
+ for (i = 0; i < OMAP3_HS_USB_PORTS; i++)
+ if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
+ is_ehci_hsic_mode(i)) {
+ omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
+ if (IS_ERR(omap->ehci_logic_fck)) {
+ ret = PTR_ERR(omap->ehci_logic_fck);
+ dev_warn(dev, "ehci_logic_fck failed:%d\n",
+ ret);
+ }
+ break;
+ }
+
+ omap->utmi_p1_fck = clk_get(dev, "utmi_p1_gfclk");
+ if (IS_ERR(omap->utmi_p1_fck)) {
+ ret = PTR_ERR(omap->utmi_p1_fck);
+ dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
+ goto err_end;
+ }
+
+ omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
+ if (IS_ERR(omap->xclk60mhsp1_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp1_ck);
+ dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
+ goto err_utmi_p1_fck;
+ }
+
+ omap->utmi_p2_fck = clk_get(dev, "utmi_p2_gfclk");
+ if (IS_ERR(omap->utmi_p2_fck)) {
+ ret = PTR_ERR(omap->utmi_p2_fck);
+ dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
+ goto err_xclk60mhsp1_ck;
+ }
+
+ omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
+ if (IS_ERR(omap->xclk60mhsp2_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp2_ck);
+ dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
+ goto err_utmi_p2_fck;
+ }
+
+ omap->usbhost_p1_fck = clk_get(dev, "usb_host_hs_utmi_p1_clk");
+ if (IS_ERR(omap->usbhost_p1_fck)) {
+ ret = PTR_ERR(omap->usbhost_p1_fck);
+ dev_err(dev, "usbhost_p1_fck failed error:%d\n", ret);
+ goto err_xclk60mhsp2_ck;
+ }
+
+ omap->usbtll_p1_fck = clk_get(dev, "usb_tll_hs_usb_ch0_clk");
+ if (IS_ERR(omap->usbtll_p1_fck)) {
+ ret = PTR_ERR(omap->usbtll_p1_fck);
+ dev_err(dev, "usbtll_p1_fck failed error:%d\n", ret);
+ goto err_usbhost_p1_fck;
+ }
+
+ omap->usbhost_p2_fck = clk_get(dev, "usb_host_hs_utmi_p2_clk");
+ if (IS_ERR(omap->usbhost_p2_fck)) {
+ ret = PTR_ERR(omap->usbhost_p2_fck);
+ dev_err(dev, "usbhost_p2_fck failed error:%d\n", ret);
+ goto err_usbtll_p1_fck;
+ }
+
+ omap->usbtll_p2_fck = clk_get(dev, "usb_tll_hs_usb_ch1_clk");
+ if (IS_ERR(omap->usbtll_p2_fck)) {
+ ret = PTR_ERR(omap->usbtll_p2_fck);
+ dev_err(dev, "usbtll_p2_fck failed error:%d\n", ret);
+ goto err_usbhost_p2_fck;
+ }
+
+ omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
+ if (IS_ERR(omap->init_60m_fclk)) {
+ ret = PTR_ERR(omap->init_60m_fclk);
+ dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
+ goto err_usbtll_p2_fck;
+ }
+
+ if (is_ehci_phy_mode(pdata->port_mode[0])) {
+ /* for OMAP3 , the clk set paretn fails */
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->xclk60mhsp1_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp1_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[0])) {
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+ }
+
+ if (is_ehci_phy_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->xclk60mhsp2_ck);
+ if (ret != 0)
+ dev_err(dev, "xclk60mhsp2_ck set parent"
+ "failed error:%d\n", ret);
+ } else if (is_ehci_tll_mode(pdata->port_mode[1])) {
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->init_60m_fclk);
+ if (ret != 0)
+ dev_err(dev, "init_60m_fclk set parent"
+ "failed error:%d\n", ret);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "uhh");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_init_60m_fclk;
+ }
+
+ omap->uhh_base = ioremap(res->start, resource_size(res));
+ if (!omap->uhh_base) {
+ dev_err(dev, "UHH ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_init_60m_fclk;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "tll");
+ if (!res) {
+ dev_err(dev, "UHH EHCI get resource failed\n");
+ ret = -ENODEV;
+ goto err_tll;
+ }
+
+ omap->tll_base = ioremap(res->start, resource_size(res));
+ if (!omap->tll_base) {
+ dev_err(dev, "TLL ioremap failed\n");
+ ret = -ENOMEM;
+ goto err_tll;
+ }
+
+ platform_set_drvdata(pdev, omap);
+
+ ret = omap_usbhs_alloc_children(pdev);
+ if (ret) {
+ dev_err(dev, "omap_usbhs_alloc_children failed\n");
+ goto err_alloc;
+ }
+
+ omap_usbhs_init(dev);
+
+ goto end_probe;
+
+err_alloc:
+ iounmap(omap->tll_base);
+
+err_tll:
+ iounmap(omap->uhh_base);
+
+err_init_60m_fclk:
+ clk_put(omap->init_60m_fclk);
+
+err_usbtll_p2_fck:
+ clk_put(omap->usbtll_p2_fck);
+
+err_usbhost_p2_fck:
+ clk_put(omap->usbhost_p2_fck);
+
+err_usbtll_p1_fck:
+ clk_put(omap->usbtll_p1_fck);
+
+err_usbhost_p1_fck:
+ clk_put(omap->usbhost_p1_fck);
+
+err_xclk60mhsp2_ck:
+ clk_put(omap->xclk60mhsp2_ck);
+
+err_utmi_p2_fck:
+ clk_put(omap->utmi_p2_fck);
+
+err_xclk60mhsp1_ck:
+ clk_put(omap->xclk60mhsp1_ck);
+
+err_utmi_p1_fck:
+ clk_put(omap->utmi_p1_fck);
+
+err_end:
+ clk_put(omap->ehci_logic_fck);
+ pm_runtime_disable(dev);
+ kfree(omap);
+
+end_probe:
+ return ret;
}
-EXPORT_SYMBOL_GPL(omap_usbhs_disable);
+
+/**
+ * usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
+ * @pdev: USB Host Controller being removed
+ *
+ * Reverses the effect of usbhs_omap_probe().
+ */
+static int __devexit usbhs_omap_remove(struct platform_device *pdev)
+{
+ struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
+
+ omap_usbhs_deinit(&pdev->dev);
+ iounmap(omap->tll_base);
+ iounmap(omap->uhh_base);
+ clk_put(omap->init_60m_fclk);
+ clk_put(omap->usbtll_p2_fck);
+ clk_put(omap->usbhost_p2_fck);
+ clk_put(omap->usbtll_p1_fck);
+ clk_put(omap->usbhost_p1_fck);
+ clk_put(omap->xclk60mhsp2_ck);
+ clk_put(omap->utmi_p2_fck);
+ clk_put(omap->xclk60mhsp1_ck);
+ clk_put(omap->utmi_p1_fck);
+ clk_put(omap->ehci_logic_fck);
+ pm_runtime_disable(&pdev->dev);
+ kfree(omap);
+
+ return 0;
+}
+
+static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
+ .runtime_suspend = usbhs_runtime_suspend,
+ .runtime_resume = usbhs_runtime_resume,
+};
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
+ .pm = &usbhsomap_dev_pm_ops,
},
.remove = __exit_p(usbhs_omap_remove),
};
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index a1cb21f..1e0e27c 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1606,6 +1606,14 @@
MMC_QUIRK_BLK_NO_CMD23),
MMC_FIXUP("MMC32G", 0x11, CID_OEMID_ANY, add_quirk_mmc,
MMC_QUIRK_BLK_NO_CMD23),
+
+ /*
+ * Some Micron MMC cards needs longer data read timeout than
+ * indicated in CSD.
+ */
+ MMC_FIXUP(CID_NAME_ANY, 0x13, 0x200, add_quirk_mmc,
+ MMC_QUIRK_LONG_READ_TIME),
+
END_FIXUP
};
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 5278ffb..950b97d 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -529,6 +529,18 @@
data->timeout_clks = 0;
}
}
+
+ /*
+ * Some cards require longer data read timeout than indicated in CSD.
+ * Address this by setting the read timeout to a "reasonably high"
+ * value. For the cards tested, 300ms has proven enough. If necessary,
+ * this value can be increased if other problematic cards require this.
+ */
+ if (mmc_card_long_read_time(card) && data->flags & MMC_DATA_READ) {
+ data->timeout_ns = 300000000;
+ data->timeout_clks = 0;
+ }
+
/*
* Some cards need very high timeouts if driven in SPI mode.
* The worst observed timeout was 900ms after writing a
@@ -1213,6 +1225,46 @@
mmc_host_clk_release(host);
}
+static void mmc_poweroff_notify(struct mmc_host *host)
+{
+ struct mmc_card *card;
+ unsigned int timeout;
+ unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION;
+ int err = 0;
+
+ card = host->card;
+
+ /*
+ * Send power notify command only if card
+ * is mmc and notify state is powered ON
+ */
+ if (card && mmc_card_mmc(card) &&
+ (card->poweroff_notify_state == MMC_POWERED_ON)) {
+
+ if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
+ notify_type = EXT_CSD_POWER_OFF_SHORT;
+ timeout = card->ext_csd.generic_cmd6_time;
+ card->poweroff_notify_state = MMC_POWEROFF_SHORT;
+ } else {
+ notify_type = EXT_CSD_POWER_OFF_LONG;
+ timeout = card->ext_csd.power_off_longtime;
+ card->poweroff_notify_state = MMC_POWEROFF_LONG;
+ }
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_POWER_OFF_NOTIFICATION,
+ notify_type, timeout);
+
+ if (err && err != -EBADMSG)
+ pr_err("Device failed to respond within %d poweroff "
+ "time. Forcefully powering down the device\n",
+ timeout);
+
+ /* Set the card state to no notification after the poweroff */
+ card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
+ }
+}
+
/*
* Apply power to the MMC stack. This is a two-stage process.
* First, we enable power to the card without the clock running.
@@ -1269,42 +1321,12 @@
void mmc_power_off(struct mmc_host *host)
{
- struct mmc_card *card;
- unsigned int notify_type;
- unsigned int timeout;
- int err;
-
mmc_host_clk_hold(host);
- card = host->card;
host->ios.clock = 0;
host->ios.vdd = 0;
- if (card && mmc_card_mmc(card) &&
- (card->poweroff_notify_state == MMC_POWERED_ON)) {
-
- if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
- notify_type = EXT_CSD_POWER_OFF_SHORT;
- timeout = card->ext_csd.generic_cmd6_time;
- card->poweroff_notify_state = MMC_POWEROFF_SHORT;
- } else {
- notify_type = EXT_CSD_POWER_OFF_LONG;
- timeout = card->ext_csd.power_off_longtime;
- card->poweroff_notify_state = MMC_POWEROFF_LONG;
- }
-
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_POWER_OFF_NOTIFICATION,
- notify_type, timeout);
-
- if (err && err != -EBADMSG)
- pr_err("Device failed to respond within %d poweroff "
- "time. Forcefully powering down the device\n",
- timeout);
-
- /* Set the card state to no notification after the poweroff */
- card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
- }
+ mmc_poweroff_notify(host);
/*
* Reset ocr mask to be the highest possible voltage supported for
@@ -2196,7 +2218,7 @@
mmc_bus_get(host);
- if (host->bus_ops && !host->bus_dead && host->bus_ops->awake)
+ if (host->bus_ops && !host->bus_dead && host->bus_ops->sleep)
err = host->bus_ops->sleep(host);
mmc_bus_put(host);
@@ -2302,8 +2324,17 @@
* pre-claim the host.
*/
if (mmc_try_claim_host(host)) {
- if (host->bus_ops->suspend)
+ if (host->bus_ops->suspend) {
+ /*
+ * For eMMC 4.5 device send notify command
+ * before sleep, because in sleep state eMMC 4.5
+ * devices respond to only RESET and AWAKE cmd
+ */
+ mmc_poweroff_notify(host);
err = host->bus_ops->suspend(host);
+ }
+ mmc_do_release_host(host);
+
if (err == -ENOSYS || !host->bus_ops->resume) {
/*
* We simply "remove" the card in this case.
@@ -2318,7 +2349,6 @@
host->pm_flags = 0;
err = 0;
}
- mmc_do_release_host(host);
} else {
err = -EBUSY;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index dbf421a..d240427 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -876,17 +876,21 @@
* set the notification byte in the ext_csd register of device
*/
if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
- (card->poweroff_notify_state == MMC_NO_POWER_NOTIFICATION)) {
+ (card->ext_csd.rev >= 6)) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
EXT_CSD_POWER_ON,
card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
- }
- if (!err)
- card->poweroff_notify_state = MMC_POWERED_ON;
+ /*
+ * The err can be -EBADMSG or 0,
+ * so check for success and update the flag
+ */
+ if (!err)
+ card->poweroff_notify_state = MMC_POWERED_ON;
+ }
/*
* Activate high speed (if supported)
diff --git a/drivers/mmc/host/mxcmmc.c b/drivers/mmc/host/mxcmmc.c
index 325ea61..8e0fbe9 100644
--- a/drivers/mmc/host/mxcmmc.c
+++ b/drivers/mmc/host/mxcmmc.c
@@ -732,6 +732,7 @@
"failed to config DMA channel. Falling back to PIO\n");
dma_release_channel(host->dma);
host->do_dma = 0;
+ host->dma = NULL;
}
}
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 101cd31..d1fb561 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1010,6 +1010,7 @@
host->data->sg_len,
omap_hsmmc_get_dma_dir(host, host->data));
omap_free_dma(dma_ch);
+ host->data->host_cookie = 0;
}
host->data = NULL;
}
@@ -1575,8 +1576,10 @@
struct mmc_data *data = mrq->data;
if (host->use_dma) {
- dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
- omap_hsmmc_get_dma_dir(host, data));
+ if (data->host_cookie)
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg,
+ data->sg_len,
+ omap_hsmmc_get_dma_dir(host, data));
data->host_cookie = 0;
}
}
@@ -1988,6 +1991,8 @@
if (mmc_slot(host).nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
+ mmc->pm_caps = mmc_slot(host).pm_caps;
+
omap_hsmmc_conf_bus_power(host);
/* Select DMA lines */
@@ -2176,13 +2181,7 @@
cancel_work_sync(&host->mmc_carddetect_work);
ret = mmc_suspend_host(host->mmc);
- if (ret == 0) {
- omap_hsmmc_disable_irq(host);
- OMAP_HSMMC_WRITE(host->base, HCTL,
- OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
- if (host->got_dbclk)
- clk_disable(host->dbclk);
- } else {
+ if (ret) {
host->suspended = 0;
if (host->pdata->resume) {
ret = host->pdata->resume(&pdev->dev,
@@ -2191,9 +2190,20 @@
dev_dbg(mmc_dev(host->mmc),
"Unmask interrupt failed\n");
}
+ goto err;
}
- pm_runtime_put_sync(host->dev);
+
+ if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) {
+ omap_hsmmc_disable_irq(host);
+ OMAP_HSMMC_WRITE(host->base, HCTL,
+ OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
+ }
+ if (host->got_dbclk)
+ clk_disable(host->dbclk);
+
}
+err:
+ pm_runtime_put_sync(host->dev);
return ret;
}
@@ -2213,7 +2223,8 @@
if (host->got_dbclk)
clk_enable(host->dbclk);
- omap_hsmmc_conf_bus_power(host);
+ if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER))
+ omap_hsmmc_conf_bus_power(host);
if (host->pdata->resume) {
ret = host->pdata->resume(&pdev->dev, host->slot_id);
diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
index 4b920b7..87b6f07 100644
--- a/drivers/mmc/host/sdhci-cns3xxx.c
+++ b/drivers/mmc/host/sdhci-cns3xxx.c
@@ -15,6 +15,7 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <linux/module.h>
#include <mach/cns3xxx.h>
#include "sdhci-pltfm.h"
diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
index 3d00e72..6b3f366 100644
--- a/drivers/mmc/host/sdhci-s3c.c
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -435,14 +435,11 @@
for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
struct clk *clk;
- char *name = pdata->clocks[ptr];
+ char name[14];
- if (name == NULL)
- continue;
-
+ snprintf(name, 14, "mmc_busclk.%d", ptr);
clk = clk_get(dev, name);
if (IS_ERR(clk)) {
- dev_err(dev, "failed to get clock %s\n", name);
continue;
}
@@ -644,8 +641,6 @@
static struct platform_driver sdhci_s3c_driver = {
.probe = sdhci_s3c_probe,
.remove = __devexit_p(sdhci_s3c_remove),
- .suspend = sdhci_s3c_suspend,
- .resume = sdhci_s3c_resume,
.driver = {
.owner = THIS_MODULE,
.name = "s3c-sdhci",
diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c
index 369366c..d5505f3 100644
--- a/drivers/mmc/host/sh_mmcif.c
+++ b/drivers/mmc/host/sh_mmcif.c
@@ -908,7 +908,7 @@
if (host->power) {
pm_runtime_put(&host->pd->dev);
host->power = false;
- if (p->down_pwr)
+ if (p->down_pwr && ios->power_mode == MMC_POWER_OFF)
p->down_pwr(host->pd);
}
host->state = STATE_IDLE;
diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c
index d85a60c..4208b39 100644
--- a/drivers/mmc/host/tmio_mmc_pio.c
+++ b/drivers/mmc/host/tmio_mmc_pio.c
@@ -798,7 +798,7 @@
/* start bus clock */
tmio_mmc_clk_start(host);
} else if (ios->power_mode != MMC_POWER_UP) {
- if (host->set_pwr)
+ if (host->set_pwr && ios->power_mode == MMC_POWER_OFF)
host->set_pwr(host->pdev, 0);
if ((pdata->flags & TMIO_MMC_HAS_COLD_CD) &&
pdata->power) {
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index be5dde0..94b7f28 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,7 +10,7 @@
obj-$(CONFIG_NET_VENDOR_AMD) += amd/
obj-$(CONFIG_NET_VENDOR_APPLE) += apple/
obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
-obj-$(CONFIG_NET_ATMEL) += cadence/
+obj-$(CONFIG_NET_CADENCE) += cadence/
obj-$(CONFIG_NET_BFIN) += adi/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index b48378a..db93191 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -5,8 +5,8 @@
config HAVE_NET_MACB
bool
-config NET_ATMEL
- bool "Atmel devices"
+config NET_CADENCE
+ bool "Cadence devices"
default y
depends on HAVE_NET_MACB || (ARM && ARCH_AT91RM9200)
---help---
@@ -21,7 +21,7 @@
the remaining Atmel network card questions. If you say Y, you will be
asked for your specific card in the following questions.
-if NET_ATMEL
+if NET_CADENCE
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
@@ -33,14 +33,16 @@
ethernet support, then you should always answer Y to this.
config MACB
- tristate "Atmel MACB support"
+ tristate "Cadence MACB/GEM support"
depends on HAVE_NET_MACB
select PHYLIB
---help---
- The Atmel MACB ethernet interface is found on many AT32 and AT91
- parts. Say Y to include support for the MACB chip.
+ The Cadence MACB ethernet interface is found on many Atmel AT32 and
+ AT91 parts. This driver also supports the Cadence GEM (Gigabit
+ Ethernet MAC found in some ARM SoC devices). Note: the Gigabit mode
+ is not yet supported. Say Y to include support for the MACB/GEM chip.
To compile this driver as a module, choose M here: the module
will be called macb.
-endif # NET_ATMEL
+endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c
index 56624d3..1a5b6ef 100644
--- a/drivers/net/ethernet/cadence/at91_ether.c
+++ b/drivers/net/ethernet/cadence/at91_ether.c
@@ -26,6 +26,7 @@
#include <linux/skbuff.h>
#include <linux/dma-mapping.h>
#include <linux/ethtool.h>
+#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/gfp.h>
@@ -255,8 +256,7 @@
unsigned int dsintr, irq_number;
int status;
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
/*
* PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
* or board does not have it connected.
@@ -265,6 +265,7 @@
return;
}
+ irq_number = lp->board_data.phy_irq_pin;
status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
if (status) {
printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
@@ -319,8 +320,7 @@
unsigned int dsintr;
unsigned int irq_number;
- irq_number = lp->board_data.phy_irq_pin;
- if (!irq_number) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
del_timer_sync(&lp->check_timer);
return;
}
@@ -365,6 +365,7 @@
disable_mdi();
spin_unlock_irq(&lp->lock);
+ irq_number = lp->board_data.phy_irq_pin;
free_irq(irq_number, dev); /* Free interrupt handler */
}
@@ -984,7 +985,7 @@
static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
struct platform_device *pdev, struct clk *ether_clk)
{
- struct at91_eth_data *board_data = pdev->dev.platform_data;
+ struct macb_platform_data *board_data = pdev->dev.platform_data;
struct net_device *dev;
struct at91_private *lp;
unsigned int val;
@@ -1077,7 +1078,7 @@
netif_carrier_off(dev); /* will be enabled in open() */
/* If board has no PHY IRQ, use a timer to poll the PHY */
- if (!lp->board_data.phy_irq_pin) {
+ if (!gpio_is_valid(lp->board_data.phy_irq_pin)) {
init_timer(&lp->check_timer);
lp->check_timer.data = (unsigned long)dev;
lp->check_timer.function = at91ether_check_link;
@@ -1169,7 +1170,8 @@
struct net_device *dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(dev);
- if (lp->board_data.phy_irq_pin >= 32)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin) &&
+ lp->board_data.phy_irq_pin >= 32)
gpio_free(lp->board_data.phy_irq_pin);
unregister_netdev(dev);
@@ -1188,11 +1190,12 @@
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
- if (phy_irq)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+ int phy_irq = lp->board_data.phy_irq_pin;
disable_irq(phy_irq);
+ }
netif_stop_queue(net_dev);
netif_device_detach(net_dev);
@@ -1206,7 +1209,6 @@
{
struct net_device *net_dev = platform_get_drvdata(pdev);
struct at91_private *lp = netdev_priv(net_dev);
- int phy_irq = lp->board_data.phy_irq_pin;
if (netif_running(net_dev)) {
clk_enable(lp->ether_clk);
@@ -1214,8 +1216,10 @@
netif_device_attach(net_dev);
netif_start_queue(net_dev);
- if (phy_irq)
+ if (gpio_is_valid(lp->board_data.phy_irq_pin)) {
+ int phy_irq = lp->board_data.phy_irq_pin;
enable_irq(phy_irq);
+ }
}
return 0;
}
diff --git a/drivers/net/ethernet/cadence/at91_ether.h b/drivers/net/ethernet/cadence/at91_ether.h
index 353f4da..3725fbb0 100644
--- a/drivers/net/ethernet/cadence/at91_ether.h
+++ b/drivers/net/ethernet/cadence/at91_ether.h
@@ -85,7 +85,9 @@
struct at91_private
{
struct mii_if_info mii; /* ethtool support */
- struct at91_eth_data board_data; /* board-specific configuration */
+ struct macb_platform_data board_data; /* board-specific
+ * configuration (shared with
+ * macb for common data */
struct clk *ether_clk; /* clock */
/* PHY */
diff --git a/drivers/net/ethernet/cadence/macb.c b/drivers/net/ethernet/cadence/macb.c
index a437b46..f3d5c65 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -1,5 +1,5 @@
/*
- * Atmel MACB Ethernet Controller driver
+ * Cadence MACB/GEM Ethernet Controller driver
*
* Copyright (C) 2004-2006 Atmel Corporation
*
@@ -8,6 +8,7 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -19,11 +20,12 @@
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/dma-mapping.h>
+#include <linux/platform_data/macb.h>
#include <linux/platform_device.h>
#include <linux/phy.h>
-
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
#include "macb.h"
@@ -60,9 +62,9 @@
u16 top;
bottom = cpu_to_le32(*((u32 *)bp->dev->dev_addr));
- macb_writel(bp, SA1B, bottom);
+ macb_or_gem_writel(bp, SA1B, bottom);
top = cpu_to_le16(*((u16 *)(bp->dev->dev_addr + 4)));
- macb_writel(bp, SA1T, top);
+ macb_or_gem_writel(bp, SA1T, top);
}
static void __init macb_get_hwaddr(struct macb *bp)
@@ -71,8 +73,8 @@
u16 top;
u8 addr[6];
- bottom = macb_readl(bp, SA1B);
- top = macb_readl(bp, SA1T);
+ bottom = macb_or_gem_readl(bp, SA1B);
+ top = macb_or_gem_readl(bp, SA1T);
addr[0] = bottom & 0xff;
addr[1] = (bottom >> 8) & 0xff;
@@ -84,7 +86,7 @@
if (is_valid_ether_addr(addr)) {
memcpy(bp->dev->dev_addr, addr, sizeof(addr));
} else {
- dev_info(&bp->pdev->dev, "invalid hw address, using random\n");
+ netdev_info(bp->dev, "invalid hw address, using random\n");
random_ether_addr(bp->dev->dev_addr);
}
}
@@ -178,11 +180,12 @@
if (status_change) {
if (phydev->link)
- printk(KERN_INFO "%s: link up (%d/%s)\n",
- dev->name, phydev->speed,
- DUPLEX_FULL == phydev->duplex ? "Full":"Half");
+ netdev_info(dev, "link up (%d/%s)\n",
+ phydev->speed,
+ phydev->duplex == DUPLEX_FULL ?
+ "Full" : "Half");
else
- printk(KERN_INFO "%s: link down\n", dev->name);
+ netdev_info(dev, "link down\n");
}
}
@@ -191,25 +194,21 @@
{
struct macb *bp = netdev_priv(dev);
struct phy_device *phydev;
- struct eth_platform_data *pdata;
int ret;
phydev = phy_find_first(bp->mii_bus);
if (!phydev) {
- printk (KERN_ERR "%s: no PHY found\n", dev->name);
+ netdev_err(dev, "no PHY found\n");
return -1;
}
- pdata = bp->pdev->dev.platform_data;
/* TODO : add pin_irq */
/* attach the mac to the phy */
ret = phy_connect_direct(dev, phydev, &macb_handle_link_change, 0,
- pdata && pdata->is_rmii ?
- PHY_INTERFACE_MODE_RMII :
- PHY_INTERFACE_MODE_MII);
+ bp->phy_interface);
if (ret) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
+ netdev_err(dev, "Could not attach to PHY\n");
return ret;
}
@@ -228,7 +227,7 @@
static int macb_mii_init(struct macb *bp)
{
- struct eth_platform_data *pdata;
+ struct macb_platform_data *pdata;
int err = -ENXIO, i;
/* Enable management port */
@@ -285,8 +284,8 @@
static void macb_update_stats(struct macb *bp)
{
u32 __iomem *reg = bp->regs + MACB_PFR;
- u32 *p = &bp->hw_stats.rx_pause_frames;
- u32 *end = &bp->hw_stats.tx_pause_frames + 1;
+ u32 *p = &bp->hw_stats.macb.rx_pause_frames;
+ u32 *end = &bp->hw_stats.macb.tx_pause_frames + 1;
WARN_ON((unsigned long)(end - p - 1) != (MACB_TPF - MACB_PFR) / 4);
@@ -303,14 +302,13 @@
status = macb_readl(bp, TSR);
macb_writel(bp, TSR, status);
- dev_dbg(&bp->pdev->dev, "macb_tx status = %02lx\n",
- (unsigned long)status);
+ netdev_dbg(bp->dev, "macb_tx status = %02lx\n", (unsigned long)status);
if (status & (MACB_BIT(UND) | MACB_BIT(TSR_RLE))) {
int i;
- printk(KERN_ERR "%s: TX %s, resetting buffers\n",
- bp->dev->name, status & MACB_BIT(UND) ?
- "underrun" : "retry limit exceeded");
+ netdev_err(bp->dev, "TX %s, resetting buffers\n",
+ status & MACB_BIT(UND) ?
+ "underrun" : "retry limit exceeded");
/* Transfer ongoing, disable transmitter, to avoid confusion */
if (status & MACB_BIT(TGO))
@@ -369,8 +367,8 @@
if (!(bufstat & MACB_BIT(TX_USED)))
break;
- dev_dbg(&bp->pdev->dev, "skb %u (data %p) TX complete\n",
- tail, skb->data);
+ netdev_dbg(bp->dev, "skb %u (data %p) TX complete\n",
+ tail, skb->data);
dma_unmap_single(&bp->pdev->dev, rp->mapping, skb->len,
DMA_TO_DEVICE);
bp->stats.tx_packets++;
@@ -395,8 +393,8 @@
len = MACB_BFEXT(RX_FRMLEN, bp->rx_ring[last_frag].ctrl);
- dev_dbg(&bp->pdev->dev, "macb_rx_frame frags %u - %u (len %u)\n",
- first_frag, last_frag, len);
+ netdev_dbg(bp->dev, "macb_rx_frame frags %u - %u (len %u)\n",
+ first_frag, last_frag, len);
skb = dev_alloc_skb(len + RX_OFFSET);
if (!skb) {
@@ -437,8 +435,8 @@
bp->stats.rx_packets++;
bp->stats.rx_bytes += len;
- dev_dbg(&bp->pdev->dev, "received skb of length %u, csum: %08x\n",
- skb->len, skb->csum);
+ netdev_dbg(bp->dev, "received skb of length %u, csum: %08x\n",
+ skb->len, skb->csum);
netif_receive_skb(skb);
return 0;
@@ -515,8 +513,8 @@
work_done = 0;
- dev_dbg(&bp->pdev->dev, "poll: status = %08lx, budget = %d\n",
- (unsigned long)status, budget);
+ netdev_dbg(bp->dev, "poll: status = %08lx, budget = %d\n",
+ (unsigned long)status, budget);
work_done = macb_rx(bp, budget);
if (work_done < budget) {
@@ -565,8 +563,7 @@
macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
if (napi_schedule_prep(&bp->napi)) {
- dev_dbg(&bp->pdev->dev,
- "scheduling RX softirq\n");
+ netdev_dbg(bp->dev, "scheduling RX softirq\n");
__napi_schedule(&bp->napi);
}
}
@@ -582,16 +579,19 @@
if (status & MACB_BIT(ISR_ROVR)) {
/* We missed at least one packet */
- bp->hw_stats.rx_overruns++;
+ if (macb_is_gem(bp))
+ bp->hw_stats.gem.rx_overruns++;
+ else
+ bp->hw_stats.macb.rx_overruns++;
}
if (status & MACB_BIT(HRESP)) {
/*
- * TODO: Reset the hardware, and maybe move the printk
- * to a lower-priority context as well (work queue?)
+ * TODO: Reset the hardware, and maybe move the
+ * netdev_err to a lower-priority context as well
+ * (work queue?)
*/
- printk(KERN_ERR "%s: DMA bus error: HRESP not OK\n",
- dev->name);
+ netdev_err(dev, "DMA bus error: HRESP not OK\n");
}
status = macb_readl(bp, ISR);
@@ -626,16 +626,12 @@
unsigned long flags;
#ifdef DEBUG
- int i;
- dev_dbg(&bp->pdev->dev,
- "start_xmit: len %u head %p data %p tail %p end %p\n",
- skb->len, skb->head, skb->data,
- skb_tail_pointer(skb), skb_end_pointer(skb));
- dev_dbg(&bp->pdev->dev,
- "data:");
- for (i = 0; i < 16; i++)
- printk(" %02x", (unsigned int)skb->data[i]);
- printk("\n");
+ netdev_dbg(bp->dev,
+ "start_xmit: len %u head %p data %p tail %p end %p\n",
+ skb->len, skb->head, skb->data,
+ skb_tail_pointer(skb), skb_end_pointer(skb));
+ print_hex_dump(KERN_DEBUG, "data: ", DUMP_PREFIX_OFFSET, 16, 1,
+ skb->data, 16, true);
#endif
len = skb->len;
@@ -645,21 +641,20 @@
if (TX_BUFFS_AVAIL(bp) < 1) {
netif_stop_queue(dev);
spin_unlock_irqrestore(&bp->lock, flags);
- dev_err(&bp->pdev->dev,
- "BUG! Tx Ring full when queue awake!\n");
- dev_dbg(&bp->pdev->dev, "tx_head = %u, tx_tail = %u\n",
- bp->tx_head, bp->tx_tail);
+ netdev_err(bp->dev, "BUG! Tx Ring full when queue awake!\n");
+ netdev_dbg(bp->dev, "tx_head = %u, tx_tail = %u\n",
+ bp->tx_head, bp->tx_tail);
return NETDEV_TX_BUSY;
}
entry = bp->tx_head;
- dev_dbg(&bp->pdev->dev, "Allocated ring entry %u\n", entry);
+ netdev_dbg(bp->dev, "Allocated ring entry %u\n", entry);
mapping = dma_map_single(&bp->pdev->dev, skb->data,
len, DMA_TO_DEVICE);
bp->tx_skb[entry].skb = skb;
bp->tx_skb[entry].mapping = mapping;
- dev_dbg(&bp->pdev->dev, "Mapped skb data %p to DMA addr %08lx\n",
- skb->data, (unsigned long)mapping);
+ netdev_dbg(bp->dev, "Mapped skb data %p to DMA addr %08lx\n",
+ skb->data, (unsigned long)mapping);
ctrl = MACB_BF(TX_FRMLEN, len);
ctrl |= MACB_BIT(TX_LAST);
@@ -723,27 +718,27 @@
&bp->rx_ring_dma, GFP_KERNEL);
if (!bp->rx_ring)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
+ netdev_dbg(bp->dev,
+ "Allocated RX ring of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->rx_ring_dma, bp->rx_ring);
size = TX_RING_BYTES;
bp->tx_ring = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->tx_ring_dma, GFP_KERNEL);
if (!bp->tx_ring)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
+ netdev_dbg(bp->dev,
+ "Allocated TX ring of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->tx_ring_dma, bp->tx_ring);
size = RX_RING_SIZE * RX_BUFFER_SIZE;
bp->rx_buffers = dma_alloc_coherent(&bp->pdev->dev, size,
&bp->rx_buffers_dma, GFP_KERNEL);
if (!bp->rx_buffers)
goto out_err;
- dev_dbg(&bp->pdev->dev,
- "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
- size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
+ netdev_dbg(bp->dev,
+ "Allocated RX buffers of %d bytes at %08lx (mapped %p)\n",
+ size, (unsigned long)bp->rx_buffers_dma, bp->rx_buffers);
return 0;
@@ -797,6 +792,84 @@
macb_readl(bp, ISR);
}
+static u32 gem_mdc_clk_div(struct macb *bp)
+{
+ u32 config;
+ unsigned long pclk_hz = clk_get_rate(bp->pclk);
+
+ if (pclk_hz <= 20000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV8);
+ else if (pclk_hz <= 40000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV16);
+ else if (pclk_hz <= 80000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV32);
+ else if (pclk_hz <= 120000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV48);
+ else if (pclk_hz <= 160000000)
+ config = GEM_BF(CLK, GEM_CLK_DIV64);
+ else
+ config = GEM_BF(CLK, GEM_CLK_DIV96);
+
+ return config;
+}
+
+static u32 macb_mdc_clk_div(struct macb *bp)
+{
+ u32 config;
+ unsigned long pclk_hz;
+
+ if (macb_is_gem(bp))
+ return gem_mdc_clk_div(bp);
+
+ pclk_hz = clk_get_rate(bp->pclk);
+ if (pclk_hz <= 20000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV8);
+ else if (pclk_hz <= 40000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV16);
+ else if (pclk_hz <= 80000000)
+ config = MACB_BF(CLK, MACB_CLK_DIV32);
+ else
+ config = MACB_BF(CLK, MACB_CLK_DIV64);
+
+ return config;
+}
+
+/*
+ * Get the DMA bus width field of the network configuration register that we
+ * should program. We find the width from decoding the design configuration
+ * register to find the maximum supported data bus width.
+ */
+static u32 macb_dbw(struct macb *bp)
+{
+ if (!macb_is_gem(bp))
+ return 0;
+
+ switch (GEM_BFEXT(DBWDEF, gem_readl(bp, DCFG1))) {
+ case 4:
+ return GEM_BF(DBW, GEM_DBW128);
+ case 2:
+ return GEM_BF(DBW, GEM_DBW64);
+ case 1:
+ default:
+ return GEM_BF(DBW, GEM_DBW32);
+ }
+}
+
+/*
+ * Configure the receive DMA engine to use the correct receive buffer size.
+ * This is a configurable parameter for GEM.
+ */
+static void macb_configure_dma(struct macb *bp)
+{
+ u32 dmacfg;
+
+ if (macb_is_gem(bp)) {
+ dmacfg = gem_readl(bp, DMACFG) & ~GEM_BF(RXBS, -1L);
+ dmacfg |= GEM_BF(RXBS, RX_BUFFER_SIZE / 64);
+ gem_writel(bp, DMACFG, dmacfg);
+ }
+}
+
static void macb_init_hw(struct macb *bp)
{
u32 config;
@@ -804,7 +877,7 @@
macb_reset_hw(bp);
__macb_set_hwaddr(bp);
- config = macb_readl(bp, NCFGR) & MACB_BF(CLK, -1L);
+ config = macb_mdc_clk_div(bp);
config |= MACB_BIT(PAE); /* PAuse Enable */
config |= MACB_BIT(DRFCS); /* Discard Rx FCS */
config |= MACB_BIT(BIG); /* Receive oversized frames */
@@ -812,8 +885,11 @@
config |= MACB_BIT(CAF); /* Copy All Frames */
if (!(bp->dev->flags & IFF_BROADCAST))
config |= MACB_BIT(NBC); /* No BroadCast */
+ config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
+ macb_configure_dma(bp);
+
/* Initialize TX and RX buffers */
macb_writel(bp, RBQP, bp->rx_ring_dma);
macb_writel(bp, TBQP, bp->tx_ring_dma);
@@ -909,8 +985,8 @@
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
}
- macb_writel(bp, HRB, mc_filter[0]);
- macb_writel(bp, HRT, mc_filter[1]);
+ macb_or_gem_writel(bp, HRB, mc_filter[0]);
+ macb_or_gem_writel(bp, HRT, mc_filter[1]);
}
/*
@@ -932,8 +1008,8 @@
if (dev->flags & IFF_ALLMULTI) {
/* Enable all multicast mode */
- macb_writel(bp, HRB, -1);
- macb_writel(bp, HRT, -1);
+ macb_or_gem_writel(bp, HRB, -1);
+ macb_or_gem_writel(bp, HRT, -1);
cfg |= MACB_BIT(NCFGR_MTI);
} else if (!netdev_mc_empty(dev)) {
/* Enable specific multicasts */
@@ -941,8 +1017,8 @@
cfg |= MACB_BIT(NCFGR_MTI);
} else if (dev->flags & (~IFF_ALLMULTI)) {
/* Disable all multicast mode */
- macb_writel(bp, HRB, 0);
- macb_writel(bp, HRT, 0);
+ macb_or_gem_writel(bp, HRB, 0);
+ macb_or_gem_writel(bp, HRT, 0);
cfg &= ~MACB_BIT(NCFGR_MTI);
}
@@ -954,7 +1030,7 @@
struct macb *bp = netdev_priv(dev);
int err;
- dev_dbg(&bp->pdev->dev, "open\n");
+ netdev_dbg(bp->dev, "open\n");
/* if the phy is not yet register, retry later*/
if (!bp->phy_dev)
@@ -965,9 +1041,8 @@
err = macb_alloc_consistent(bp);
if (err) {
- printk(KERN_ERR
- "%s: Unable to allocate DMA memory (error %d)\n",
- dev->name, err);
+ netdev_err(dev, "Unable to allocate DMA memory (error %d)\n",
+ err);
return err;
}
@@ -1005,11 +1080,62 @@
return 0;
}
+static void gem_update_stats(struct macb *bp)
+{
+ u32 __iomem *reg = bp->regs + GEM_OTX;
+ u32 *p = &bp->hw_stats.gem.tx_octets_31_0;
+ u32 *end = &bp->hw_stats.gem.rx_udp_checksum_errors + 1;
+
+ for (; p < end; p++, reg++)
+ *p += __raw_readl(reg);
+}
+
+static struct net_device_stats *gem_get_stats(struct macb *bp)
+{
+ struct gem_stats *hwstat = &bp->hw_stats.gem;
+ struct net_device_stats *nstat = &bp->stats;
+
+ gem_update_stats(bp);
+
+ nstat->rx_errors = (hwstat->rx_frame_check_sequence_errors +
+ hwstat->rx_alignment_errors +
+ hwstat->rx_resource_errors +
+ hwstat->rx_overruns +
+ hwstat->rx_oversize_frames +
+ hwstat->rx_jabbers +
+ hwstat->rx_undersized_frames +
+ hwstat->rx_length_field_frame_errors);
+ nstat->tx_errors = (hwstat->tx_late_collisions +
+ hwstat->tx_excessive_collisions +
+ hwstat->tx_underrun +
+ hwstat->tx_carrier_sense_errors);
+ nstat->multicast = hwstat->rx_multicast_frames;
+ nstat->collisions = (hwstat->tx_single_collision_frames +
+ hwstat->tx_multiple_collision_frames +
+ hwstat->tx_excessive_collisions);
+ nstat->rx_length_errors = (hwstat->rx_oversize_frames +
+ hwstat->rx_jabbers +
+ hwstat->rx_undersized_frames +
+ hwstat->rx_length_field_frame_errors);
+ nstat->rx_over_errors = hwstat->rx_resource_errors;
+ nstat->rx_crc_errors = hwstat->rx_frame_check_sequence_errors;
+ nstat->rx_frame_errors = hwstat->rx_alignment_errors;
+ nstat->rx_fifo_errors = hwstat->rx_overruns;
+ nstat->tx_aborted_errors = hwstat->tx_excessive_collisions;
+ nstat->tx_carrier_errors = hwstat->tx_carrier_sense_errors;
+ nstat->tx_fifo_errors = hwstat->tx_underrun;
+
+ return nstat;
+}
+
static struct net_device_stats *macb_get_stats(struct net_device *dev)
{
struct macb *bp = netdev_priv(dev);
struct net_device_stats *nstat = &bp->stats;
- struct macb_stats *hwstat = &bp->hw_stats;
+ struct macb_stats *hwstat = &bp->hw_stats.macb;
+
+ if (macb_is_gem(bp))
+ return gem_get_stats(bp);
/* read stats from hardware */
macb_update_stats(bp);
@@ -1117,14 +1243,59 @@
#endif
};
+#if defined(CONFIG_OF)
+static const struct of_device_id macb_dt_ids[] = {
+ { .compatible = "cdns,at32ap7000-macb" },
+ { .compatible = "cdns,at91sam9260-macb" },
+ { .compatible = "cdns,macb" },
+ { .compatible = "cdns,pc302-gem" },
+ { .compatible = "cdns,gem" },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, macb_dt_ids);
+
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+
+ if (np)
+ return of_get_phy_mode(np);
+
+ return -ENODEV;
+}
+
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+ struct device_node *np = bp->pdev->dev.of_node;
+ if (np) {
+ const char *mac = of_get_mac_address(np);
+ if (mac) {
+ memcpy(bp->dev->dev_addr, mac, ETH_ALEN);
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+#else
+static int __devinit macb_get_phy_mode_dt(struct platform_device *pdev)
+{
+ return -ENODEV;
+}
+static int __devinit macb_get_hwaddr_dt(struct macb *bp)
+{
+ return -ENODEV;
+}
+#endif
+
static int __init macb_probe(struct platform_device *pdev)
{
- struct eth_platform_data *pdata;
+ struct macb_platform_data *pdata;
struct resource *regs;
struct net_device *dev;
struct macb *bp;
struct phy_device *phydev;
- unsigned long pclk_hz;
u32 config;
int err = -ENXIO;
@@ -1152,28 +1323,19 @@
spin_lock_init(&bp->lock);
-#if defined(CONFIG_ARCH_AT91)
- bp->pclk = clk_get(&pdev->dev, "macb_clk");
+ bp->pclk = clk_get(&pdev->dev, "pclk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get macb_clk\n");
goto err_out_free_dev;
}
clk_enable(bp->pclk);
-#else
- bp->pclk = clk_get(&pdev->dev, "pclk");
- if (IS_ERR(bp->pclk)) {
- dev_err(&pdev->dev, "failed to get pclk\n");
- goto err_out_free_dev;
- }
+
bp->hclk = clk_get(&pdev->dev, "hclk");
if (IS_ERR(bp->hclk)) {
dev_err(&pdev->dev, "failed to get hclk\n");
goto err_out_put_pclk;
}
-
- clk_enable(bp->pclk);
clk_enable(bp->hclk);
-#endif
bp->regs = ioremap(regs->start, resource_size(regs));
if (!bp->regs) {
@@ -1185,9 +1347,8 @@
dev->irq = platform_get_irq(pdev, 0);
err = request_irq(dev->irq, macb_interrupt, 0, dev->name, dev);
if (err) {
- printk(KERN_ERR
- "%s: Unable to request IRQ %d (error %d)\n",
- dev->name, dev->irq, err);
+ dev_err(&pdev->dev, "Unable to request IRQ %d (error %d)\n",
+ dev->irq, err);
goto err_out_iounmap;
}
@@ -1198,31 +1359,37 @@
dev->base_addr = regs->start;
/* Set MII management clock divider */
- pclk_hz = clk_get_rate(bp->pclk);
- if (pclk_hz <= 20000000)
- config = MACB_BF(CLK, MACB_CLK_DIV8);
- else if (pclk_hz <= 40000000)
- config = MACB_BF(CLK, MACB_CLK_DIV16);
- else if (pclk_hz <= 80000000)
- config = MACB_BF(CLK, MACB_CLK_DIV32);
- else
- config = MACB_BF(CLK, MACB_CLK_DIV64);
+ config = macb_mdc_clk_div(bp);
+ config |= macb_dbw(bp);
macb_writel(bp, NCFGR, config);
- macb_get_hwaddr(bp);
- pdata = pdev->dev.platform_data;
+ err = macb_get_hwaddr_dt(bp);
+ if (err < 0)
+ macb_get_hwaddr(bp);
- if (pdata && pdata->is_rmii)
+ err = macb_get_phy_mode_dt(pdev);
+ if (err < 0) {
+ pdata = pdev->dev.platform_data;
+ if (pdata && pdata->is_rmii)
+ bp->phy_interface = PHY_INTERFACE_MODE_RMII;
+ else
+ bp->phy_interface = PHY_INTERFACE_MODE_MII;
+ } else {
+ bp->phy_interface = err;
+ }
+
+ if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+ macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
+ MACB_BIT(CLKEN)));
#else
- macb_writel(bp, USRIO, 0);
+ macb_or_gem_writel(bp, USRIO, 0);
#endif
else
#if defined(CONFIG_ARCH_AT91)
- macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(CLKEN));
#else
- macb_writel(bp, USRIO, MACB_BIT(MII));
+ macb_or_gem_writel(bp, USRIO, MACB_BIT(MII));
#endif
bp->tx_pending = DEF_TX_RING_PENDING;
@@ -1239,13 +1406,13 @@
platform_set_drvdata(pdev, dev);
- printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d (%pM)\n",
- dev->name, dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, "Cadence %s at 0x%08lx irq %d (%pM)\n",
+ macb_is_gem(bp) ? "GEM" : "MACB", dev->base_addr,
+ dev->irq, dev->dev_addr);
phydev = bp->phy_dev;
- printk(KERN_INFO "%s: attached PHY driver [%s] "
- "(mii_bus:phy_addr=%s, irq=%d)\n", dev->name,
- phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s, irq=%d)\n",
+ phydev->drv->name, dev_name(&phydev->dev), phydev->irq);
return 0;
@@ -1256,14 +1423,10 @@
err_out_iounmap:
iounmap(bp->regs);
err_out_disable_clocks:
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
-#endif
clk_disable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
err_out_put_pclk:
-#endif
clk_put(bp->pclk);
err_out_free_dev:
free_netdev(dev);
@@ -1289,10 +1452,8 @@
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
clk_put(bp->hclk);
-#endif
clk_disable(bp->pclk);
clk_put(bp->pclk);
free_netdev(dev);
@@ -1310,9 +1471,7 @@
netif_device_detach(netdev);
-#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
-#endif
clk_disable(bp->pclk);
return 0;
@@ -1324,9 +1483,7 @@
struct macb *bp = netdev_priv(netdev);
clk_enable(bp->pclk);
-#ifndef CONFIG_ARCH_AT91
clk_enable(bp->hclk);
-#endif
netif_device_attach(netdev);
@@ -1344,6 +1501,7 @@
.driver = {
.name = "macb",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(macb_dt_ids),
},
};
@@ -1361,6 +1519,6 @@
module_exit(macb_exit);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
+MODULE_DESCRIPTION("Cadence MACB/GEM Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index d3212f6..335e288 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -59,6 +59,24 @@
#define MACB_TPQ 0x00bc
#define MACB_USRIO 0x00c0
#define MACB_WOL 0x00c4
+#define MACB_MID 0x00fc
+
+/* GEM register offsets. */
+#define GEM_NCFGR 0x0004
+#define GEM_USRIO 0x000c
+#define GEM_DMACFG 0x0010
+#define GEM_HRB 0x0080
+#define GEM_HRT 0x0084
+#define GEM_SA1B 0x0088
+#define GEM_SA1T 0x008C
+#define GEM_OTX 0x0100
+#define GEM_DCFG1 0x0280
+#define GEM_DCFG2 0x0284
+#define GEM_DCFG3 0x0288
+#define GEM_DCFG4 0x028c
+#define GEM_DCFG5 0x0290
+#define GEM_DCFG6 0x0294
+#define GEM_DCFG7 0x0298
/* Bitfields in NCR */
#define MACB_LB_OFFSET 0
@@ -126,6 +144,21 @@
#define MACB_IRXFCS_OFFSET 19
#define MACB_IRXFCS_SIZE 1
+/* GEM specific NCFGR bitfields. */
+#define GEM_CLK_OFFSET 18
+#define GEM_CLK_SIZE 3
+#define GEM_DBW_OFFSET 21
+#define GEM_DBW_SIZE 2
+
+/* Constants for data bus width. */
+#define GEM_DBW32 0
+#define GEM_DBW64 1
+#define GEM_DBW128 2
+
+/* Bitfields in DMACFG. */
+#define GEM_RXBS_OFFSET 16
+#define GEM_RXBS_SIZE 8
+
/* Bitfields in NSR */
#define MACB_NSR_LINK_OFFSET 0
#define MACB_NSR_LINK_SIZE 1
@@ -228,12 +261,30 @@
#define MACB_WOL_MTI_OFFSET 19
#define MACB_WOL_MTI_SIZE 1
+/* Bitfields in MID */
+#define MACB_IDNUM_OFFSET 16
+#define MACB_IDNUM_SIZE 16
+#define MACB_REV_OFFSET 0
+#define MACB_REV_SIZE 16
+
+/* Bitfields in DCFG1. */
+#define GEM_DBWDEF_OFFSET 25
+#define GEM_DBWDEF_SIZE 3
+
/* Constants for CLK */
#define MACB_CLK_DIV8 0
#define MACB_CLK_DIV16 1
#define MACB_CLK_DIV32 2
#define MACB_CLK_DIV64 3
+/* GEM specific constants for CLK. */
+#define GEM_CLK_DIV8 0
+#define GEM_CLK_DIV16 1
+#define GEM_CLK_DIV32 2
+#define GEM_CLK_DIV48 3
+#define GEM_CLK_DIV64 4
+#define GEM_CLK_DIV96 5
+
/* Constants for MAN register */
#define MACB_MAN_SOF 1
#define MACB_MAN_WRITE 1
@@ -254,11 +305,52 @@
<< MACB_##name##_OFFSET)) \
| MACB_BF(name,value))
+#define GEM_BIT(name) \
+ (1 << GEM_##name##_OFFSET)
+#define GEM_BF(name, value) \
+ (((value) & ((1 << GEM_##name##_SIZE) - 1)) \
+ << GEM_##name##_OFFSET)
+#define GEM_BFEXT(name, value)\
+ (((value) >> GEM_##name##_OFFSET) \
+ & ((1 << GEM_##name##_SIZE) - 1))
+#define GEM_BFINS(name, value, old) \
+ (((old) & ~(((1 << GEM_##name##_SIZE) - 1) \
+ << GEM_##name##_OFFSET)) \
+ | GEM_BF(name, value))
+
/* Register access macros */
#define macb_readl(port,reg) \
__raw_readl((port)->regs + MACB_##reg)
#define macb_writel(port,reg,value) \
__raw_writel((value), (port)->regs + MACB_##reg)
+#define gem_readl(port, reg) \
+ __raw_readl((port)->regs + GEM_##reg)
+#define gem_writel(port, reg, value) \
+ __raw_writel((value), (port)->regs + GEM_##reg)
+
+/*
+ * Conditional GEM/MACB macros. These perform the operation to the correct
+ * register dependent on whether the device is a GEM or a MACB. For registers
+ * and bitfields that are common across both devices, use macb_{read,write}l
+ * to avoid the cost of the conditional.
+ */
+#define macb_or_gem_writel(__bp, __reg, __value) \
+ ({ \
+ if (macb_is_gem((__bp))) \
+ gem_writel((__bp), __reg, __value); \
+ else \
+ macb_writel((__bp), __reg, __value); \
+ })
+
+#define macb_or_gem_readl(__bp, __reg) \
+ ({ \
+ u32 __v; \
+ if (macb_is_gem((__bp))) \
+ __v = gem_readl((__bp), __reg); \
+ else \
+ __v = macb_readl((__bp), __reg); \
+ __v; \
+ })
struct dma_desc {
u32 addr;
@@ -358,6 +450,54 @@
u32 tx_pause_frames;
};
+struct gem_stats {
+ u32 tx_octets_31_0;
+ u32 tx_octets_47_32;
+ u32 tx_frames;
+ u32 tx_broadcast_frames;
+ u32 tx_multicast_frames;
+ u32 tx_pause_frames;
+ u32 tx_64_byte_frames;
+ u32 tx_65_127_byte_frames;
+ u32 tx_128_255_byte_frames;
+ u32 tx_256_511_byte_frames;
+ u32 tx_512_1023_byte_frames;
+ u32 tx_1024_1518_byte_frames;
+ u32 tx_greater_than_1518_byte_frames;
+ u32 tx_underrun;
+ u32 tx_single_collision_frames;
+ u32 tx_multiple_collision_frames;
+ u32 tx_excessive_collisions;
+ u32 tx_late_collisions;
+ u32 tx_deferred_frames;
+ u32 tx_carrier_sense_errors;
+ u32 rx_octets_31_0;
+ u32 rx_octets_47_32;
+ u32 rx_frames;
+ u32 rx_broadcast_frames;
+ u32 rx_multicast_frames;
+ u32 rx_pause_frames;
+ u32 rx_64_byte_frames;
+ u32 rx_65_127_byte_frames;
+ u32 rx_128_255_byte_frames;
+ u32 rx_256_511_byte_frames;
+ u32 rx_512_1023_byte_frames;
+ u32 rx_1024_1518_byte_frames;
+ u32 rx_greater_than_1518_byte_frames;
+ u32 rx_undersized_frames;
+ u32 rx_oversize_frames;
+ u32 rx_jabbers;
+ u32 rx_frame_check_sequence_errors;
+ u32 rx_length_field_frame_errors;
+ u32 rx_symbol_errors;
+ u32 rx_alignment_errors;
+ u32 rx_resource_errors;
+ u32 rx_overruns;
+ u32 rx_ip_header_checksum_errors;
+ u32 rx_tcp_checksum_errors;
+ u32 rx_udp_checksum_errors;
+};
+
struct macb {
void __iomem *regs;
@@ -376,7 +516,10 @@
struct net_device *dev;
struct napi_struct napi;
struct net_device_stats stats;
- struct macb_stats hw_stats;
+ union {
+ struct macb_stats macb;
+ struct gem_stats gem;
+ } hw_stats;
dma_addr_t rx_ring_dma;
dma_addr_t tx_ring_dma;
@@ -389,6 +532,13 @@
unsigned int link;
unsigned int speed;
unsigned int duplex;
+
+ phy_interface_t phy_interface;
};
+static inline bool macb_is_gem(struct macb *bp)
+{
+ return MACB_BFEXT(IDNUM, macb_readl(bp, MID)) == 0x2;
+}
+
#endif /* _MACB_H */
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 1124ce0..c136230 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -232,6 +232,7 @@
struct platform_device *pdev;
int opened;
+ int dev_id;
/* Phylib and MDIO interface */
struct mii_bus *mii_bus;
@@ -837,7 +838,7 @@
/* Adjust MAC if using macaddr */
if (iap == macaddr)
- ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->pdev->id;
+ ndev->dev_addr[ETH_ALEN-1] = macaddr[ETH_ALEN-1] + fep->dev_id;
}
/* ------------------------------------------------------------------------- */
@@ -953,7 +954,7 @@
char mdio_bus_id[MII_BUS_ID_SIZE];
char phy_name[MII_BUS_ID_SIZE + 3];
int phy_id;
- int dev_id = fep->pdev->id;
+ int dev_id = fep->dev_id;
fep->phy_dev = NULL;
@@ -1031,7 +1032,7 @@
* mdio interface in board design, and need to be configured by
* fec0 mii_bus.
*/
- if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) {
+ if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && fep->dev_id > 0) {
/* fec1 uses fec0 mii_bus */
fep->mii_bus = fec0_mii_bus;
return 0;
@@ -1063,7 +1064,7 @@
fep->mii_bus->read = fec_enet_mdio_read;
fep->mii_bus->write = fec_enet_mdio_write;
fep->mii_bus->reset = fec_enet_mdio_reset;
- snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", pdev->id + 1);
+ snprintf(fep->mii_bus->id, MII_BUS_ID_SIZE, "%x", fep->dev_id + 1);
fep->mii_bus->priv = fep;
fep->mii_bus->parent = &pdev->dev;
@@ -1521,6 +1522,7 @@
int i, irq, ret = 0;
struct resource *r;
const struct of_device_id *of_id;
+ static int dev_id;
of_id = of_match_device(fec_dt_ids, &pdev->dev);
if (of_id)
@@ -1548,6 +1550,7 @@
fep->hwp = ioremap(r->start, resource_size(r));
fep->pdev = pdev;
+ fep->dev_id = dev_id++;
if (!fep->hwp) {
ret = -ENOMEM;
diff --git a/drivers/net/ethernet/freescale/fsl_pq_mdio.c b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
index 52f4e8a..4d9f84b 100644
--- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c
+++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c
@@ -183,28 +183,10 @@
}
EXPORT_SYMBOL_GPL(fsl_pq_mdio_bus_name);
-/* Scan the bus in reverse, looking for an empty spot */
-static int fsl_pq_mdio_find_free(struct mii_bus *new_bus)
-{
- int i;
- for (i = PHY_MAX_ADDR; i > 0; i--) {
- u32 phy_id;
-
- if (get_phy_id(new_bus, i, &phy_id))
- return -1;
-
- if (phy_id == 0xffffffff)
- break;
- }
-
- return i;
-}
-
-
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
static u32 __iomem *get_gfar_tbipa(struct fsl_pq_mdio __iomem *regs, struct device_node *np)
{
+#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
struct gfar __iomem *enet_regs;
/*
@@ -220,15 +202,15 @@
} else if (of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi")) {
return of_iomap(np, 1);
- } else
- return NULL;
-}
+ }
#endif
+ return NULL;
+}
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
static int get_ucc_id_for_range(u64 start, u64 end, u32 *ucc_id)
{
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
struct device_node *np = NULL;
int err = 0;
@@ -261,9 +243,10 @@
return err;
else
return -EINVAL;
-}
+#else
+ return -ENODEV;
#endif
-
+}
static int fsl_pq_mdio_probe(struct platform_device *ofdev)
{
@@ -339,19 +322,13 @@
of_device_is_compatible(np, "fsl,etsec2-mdio") ||
of_device_is_compatible(np, "fsl,etsec2-tbi") ||
of_device_is_compatible(np, "gianfar")) {
-#if defined(CONFIG_GIANFAR) || defined(CONFIG_GIANFAR_MODULE)
tbipa = get_gfar_tbipa(regs, np);
if (!tbipa) {
err = -EINVAL;
goto err_free_irqs;
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else if (of_device_is_compatible(np, "fsl,ucc-mdio") ||
of_device_is_compatible(np, "ucc_geth_phy")) {
-#if defined(CONFIG_UCC_GETH) || defined(CONFIG_UCC_GETH_MODULE)
u32 id;
static u32 mii_mng_master;
@@ -364,10 +341,6 @@
mii_mng_master = id;
ucc_set_qe_mux_mii_mng(id - 1);
}
-#else
- err = -ENODEV;
- goto err_free_irqs;
-#endif
} else {
err = -ENODEV;
goto err_free_irqs;
@@ -386,16 +359,6 @@
}
if (tbiaddr == -1) {
- out_be32(tbipa, 0);
-
- tbiaddr = fsl_pq_mdio_find_free(new_bus);
- }
-
- /*
- * We define TBIPA at 0 to be illegal, opting to fail for boards that
- * have PHYs at 1-31, rather than change tbipa and rescan.
- */
- if (tbiaddr == 0) {
err = -EBUSY;
goto err_free_irqs;
diff --git a/drivers/net/ppp/pptp.c b/drivers/net/ppp/pptp.c
index 89f829f..f8a6853 100644
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -423,10 +423,8 @@
lock_sock(sk);
opt->src_addr = sp->sa_addr.pptp;
- if (add_chan(po)) {
- release_sock(sk);
+ if (add_chan(po))
error = -EBUSY;
- }
release_sock(sk);
return error;
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 93fbe6f..d2348a5 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -286,7 +286,7 @@
ath_start_ani(common);
}
- if (ath9k_hw_ops(ah)->antdiv_comb_conf_get && sc->ant_rx != 3) {
+ if ((ah->caps.hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB) && sc->ant_rx != 3) {
struct ath_hw_antcomb_conf div_ant_conf;
u8 lna_conf;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
index 592a10a..3b585aa 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.c
@@ -569,7 +569,7 @@
}
case ERFSLEEP:{
if (ppsc->rfpwr_state == ERFOFF)
- break;
+ return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
ring = &pcipriv->dev.tx_ring[queue_id];
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
index 7285290..e49cf22 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/phy.c
@@ -548,7 +548,7 @@
break;
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
- break;
+ return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
ring = &pcipriv->dev.tx_ring[queue_id];
diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
index 3ac7af1..0883349 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c
@@ -3374,7 +3374,7 @@
break;
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
- break;
+ return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
index f27171a..f10ac1a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192se/phy.c
@@ -602,7 +602,7 @@
}
case ERFSLEEP:
if (ppsc->rfpwr_state == ERFOFF)
- break;
+ return false;
for (queue_id = 0, i = 0;
queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
diff --git a/drivers/pcmcia/pxa2xx_cm_x255.c b/drivers/pcmcia/pxa2xx_cm_x255.c
index 0b4f946..31ab6ddf 100644
--- a/drivers/pcmcia/pxa2xx_cm_x255.c
+++ b/drivers/pcmcia/pxa2xx_cm_x255.c
@@ -16,8 +16,6 @@
#include <linux/gpio.h>
#include <linux/export.h>
-#include <asm/mach-types.h>
-
#include "soc_common.h"
#define GPIO_PCMCIA_SKTSEL (54)
@@ -27,15 +25,15 @@
#define GPIO_PCMCIA_S1_RDYINT (8)
#define GPIO_PCMCIA_RESET (9)
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S1_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S1_CD_VALID)
-#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
-#define PCMCIA_S1_RDYINT IRQ_GPIO(GPIO_PCMCIA_S1_RDYINT)
+#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S1_CD_VALID gpio_to_irq(GPIO_PCMCIA_S1_CD_VALID)
+#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S1_RDYINT gpio_to_irq(GPIO_PCMCIA_S1_RDYINT)
static struct pcmcia_irqs irqs[] = {
- { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
- { 1, PCMCIA_S1_CD_VALID, "PCMCIA1 CD" },
+ { .sock = 0, .str = "PCMCIA0 CD" },
+ { .sock = 1, .str = "PCMCIA1 CD" },
};
static int cmx255_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -46,6 +44,8 @@
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
skt->socket.pci_irq = skt->nr == 0 ? PCMCIA_S0_RDYINT : PCMCIA_S1_RDYINT;
+ irqs[0].irq = PCMCIA_S0_CD_VALID;
+ irqs[1].irq = PCMCIA_S1_CD_VALID;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_cm_x270.c b/drivers/pcmcia/pxa2xx_cm_x270.c
index 923f315..3dc7621 100644
--- a/drivers/pcmcia/pxa2xx_cm_x270.c
+++ b/drivers/pcmcia/pxa2xx_cm_x270.c
@@ -16,20 +16,18 @@
#include <linux/gpio.h>
#include <linux/export.h>
-#include <asm/mach-types.h>
-
#include "soc_common.h"
#define GPIO_PCMCIA_S0_CD_VALID (84)
#define GPIO_PCMCIA_S0_RDYINT (82)
#define GPIO_PCMCIA_RESET (53)
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(GPIO_PCMCIA_S0_CD_VALID)
-#define PCMCIA_S0_RDYINT IRQ_GPIO(GPIO_PCMCIA_S0_RDYINT)
+#define PCMCIA_S0_CD_VALID gpio_to_irq(GPIO_PCMCIA_S0_CD_VALID)
+#define PCMCIA_S0_RDYINT gpio_to_irq(GPIO_PCMCIA_S0_RDYINT)
static struct pcmcia_irqs irqs[] = {
- { 0, PCMCIA_S0_CD_VALID, "PCMCIA0 CD" },
+ { .sock = 0, .str = "PCMCIA0 CD" },
};
static int cmx270_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
@@ -40,6 +38,7 @@
gpio_direction_output(GPIO_PCMCIA_RESET, 0);
skt->socket.pci_irq = PCMCIA_S0_RDYINT;
+ irqs[0].irq = PCMCIA_S0_CD_VALID;
ret = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
if (!ret)
gpio_free(GPIO_PCMCIA_RESET);
diff --git a/drivers/pcmcia/pxa2xx_e740.c b/drivers/pcmcia/pxa2xx_e740.c
index 8bfbd4d..17cd2ce 100644
--- a/drivers/pcmcia/pxa2xx_e740.c
+++ b/drivers/pcmcia/pxa2xx_e740.c
@@ -26,20 +26,23 @@
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
- .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD0),
.str = "CF card detect"
},
{
.sock = 1,
- .irq = IRQ_GPIO(GPIO_E740_PCMCIA_CD1),
.str = "Wifi switch"
},
};
static int e740_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = skt->nr == 0 ? IRQ_GPIO(GPIO_E740_PCMCIA_RDY0) :
- IRQ_GPIO(GPIO_E740_PCMCIA_RDY1);
+ if (skt->nr == 0)
+ skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY0);
+ else
+ skt->socket.pci_irq = gpio_to_irq(GPIO_E740_PCMCIA_RDY1);
+
+ cd_irqs[0].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD0);
+ cd_irqs[1].irq = gpio_to_irq(GPIO_E740_PCMCIA_CD1);
return soc_pcmcia_request_irqs(skt, &cd_irqs[skt->nr], 1);
}
diff --git a/drivers/pcmcia/pxa2xx_palmld.c b/drivers/pcmcia/pxa2xx_palmld.c
index d589ad1..6a8e011 100644
--- a/drivers/pcmcia/pxa2xx_palmld.c
+++ b/drivers/pcmcia/pxa2xx_palmld.c
@@ -33,7 +33,7 @@
ret = gpio_request_array(palmld_pcmcia_gpios,
ARRAY_SIZE(palmld_pcmcia_gpios));
- skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMLD_PCMCIA_READY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMLD_PCMCIA_READY);
return ret;
}
diff --git a/drivers/pcmcia/pxa2xx_palmtc.c b/drivers/pcmcia/pxa2xx_palmtc.c
index 9c6a04b..9e38de7 100644
--- a/drivers/pcmcia/pxa2xx_palmtc.c
+++ b/drivers/pcmcia/pxa2xx_palmtc.c
@@ -37,7 +37,7 @@
ret = gpio_request_array(palmtc_pcmcia_gpios,
ARRAY_SIZE(palmtc_pcmcia_gpios));
- skt->socket.pci_irq = IRQ_GPIO(GPIO_NR_PALMTC_PCMCIA_READY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_NR_PALMTC_PCMCIA_READY);
return ret;
}
diff --git a/drivers/pcmcia/pxa2xx_stargate2.c b/drivers/pcmcia/pxa2xx_stargate2.c
index 9396222..6c2366b 100644
--- a/drivers/pcmcia/pxa2xx_stargate2.c
+++ b/drivers/pcmcia/pxa2xx_stargate2.c
@@ -34,7 +34,7 @@
#define SG2_S0_GPIO_READY 81
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO(SG2_S0_GPIO_DETECT), "PCMCIA0 CD" },
+ {.sock = 0, .str = "PCMCIA0 CD" },
};
static struct gpio sg2_pcmcia_gpios[] = {
@@ -44,7 +44,9 @@
static int sg2_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
- skt->socket.pci_irq = IRQ_GPIO(SG2_S0_GPIO_READY);
+ skt->socket.pci_irq = gpio_to_irq(SG2_S0_GPIO_READY);
+ irqs[0].irq = gpio_to_irq(SG2_S0_GPIO_DETECT);
+
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
diff --git a/drivers/pcmcia/pxa2xx_trizeps4.c b/drivers/pcmcia/pxa2xx_trizeps4.c
index 57ddb96..7c33f89 100644
--- a/drivers/pcmcia/pxa2xx_trizeps4.c
+++ b/drivers/pcmcia/pxa2xx_trizeps4.c
@@ -30,7 +30,7 @@
extern void board_pcmcia_power(int power);
static struct pcmcia_irqs irqs[] = {
- { 0, IRQ_GPIO(GPIO_PCD), "cs0_cd" }
+ { .sock = 0, .str = "cs0_cd" }
/* on other baseboards we can have more inputs */
};
@@ -53,7 +53,8 @@
gpio_free(GPIO_PRDY);
return -EINVAL;
}
- skt->socket.pci_irq = IRQ_GPIO(GPIO_PRDY);
+ skt->socket.pci_irq = gpio_to_irq(GPIO_PRDY);
+ irqs[0].irq = gpio_to_irq(GPIO_PCD);
break;
default:
break;
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index 66ab92c..61b17d2 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -38,12 +38,10 @@
static struct pcmcia_irqs cd_irqs[] = {
{
.sock = 0,
- .irq = IRQ_GPIO(GPIO84_VPAC270_PCMCIA_CD),
.str = "PCMCIA CD"
},
{
.sock = 1,
- .irq = IRQ_GPIO(GPIO17_VPAC270_CF_CD),
.str = "CF CD"
},
};
@@ -57,6 +55,7 @@
ARRAY_SIZE(vpac270_pcmcia_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO35_VPAC270_PCMCIA_RDY);
+ cd_irqs[0].irq = gpio_to_irq(GPIO84_VPAC270_PCMCIA_CD);
if (!ret)
ret = soc_pcmcia_request_irqs(skt, &cd_irqs[0], 1);
@@ -65,6 +64,7 @@
ARRAY_SIZE(vpac270_cf_gpios));
skt->socket.pci_irq = gpio_to_irq(GPIO12_VPAC270_CF_RDY);
+ cd_irqs[1].irq = gpio_to_irq(GPIO17_VPAC270_CF_CD);
if (!ret)
ret = soc_pcmcia_request_irqs(skt, &cd_irqs[1], 1);
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 5b979d9..175067a 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -25,6 +25,7 @@
#include <linux/clk.h>
#include <linux/log2.h>
#include <linux/slab.h>
+#include <linux/of.h>
#include <mach/hardware.h>
#include <asm/uaccess.h>
@@ -507,7 +508,13 @@
goto err_nortc;
}
- s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node)
+ s3c_rtc_cpu_type = of_device_is_compatible(pdev->dev.of_node,
+ "samsung,s3c6410-rtc") ? TYPE_S3C64XX : TYPE_S3C2410;
+ else
+#endif
+ s3c_rtc_cpu_type = platform_get_device_id(pdev)->driver_data;
/* Check RTC Time */
@@ -629,6 +636,17 @@
#define s3c_rtc_resume NULL
#endif
+#ifdef CONFIG_OF
+static const struct of_device_id s3c_rtc_dt_match[] = {
+ { .compatible = "samsung,s3c2410-rtc" },
+ { .compatible = "samsung,s3c6410-rtc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c_rtc_dt_match);
+#else
+#define s3c_rtc_dt_match NULL
+#endif
+
static struct platform_device_id s3c_rtc_driver_ids[] = {
{
.name = "s3c2410-rtc",
@@ -651,6 +669,7 @@
.driver = {
.name = "s3c-rtc",
.owner = THIS_MODULE,
+ .of_match_table = s3c_rtc_dt_match,
},
};
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index 5f94d22..5426682 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -233,13 +233,9 @@
int ret = 0;
while (len > 0) {
- int err = bbc_i2c_writeb(client, *buf, off);
-
- if (err < 0) {
- ret = err;
+ ret = bbc_i2c_writeb(client, *buf, off);
+ if (ret < 0)
break;
- }
-
len--;
buf++;
off++;
@@ -253,11 +249,9 @@
int ret = 0;
while (len > 0) {
- int err = bbc_i2c_readb(client, buf, off);
- if (err < 0) {
- ret = err;
+ ret = bbc_i2c_readb(client, buf, off);
+ if (ret < 0)
break;
- }
len--;
buf++;
off++;
@@ -422,17 +416,6 @@
.remove = __devexit_p(bbc_i2c_remove),
};
-static int __init bbc_i2c_init(void)
-{
- return platform_driver_register(&bbc_i2c_driver);
-}
-
-static void __exit bbc_i2c_exit(void)
-{
- platform_driver_unregister(&bbc_i2c_driver);
-}
-
-module_init(bbc_i2c_init);
-module_exit(bbc_i2c_exit);
+module_platform_driver(bbc_i2c_driver);
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index 965a1fc..4b99397 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -275,15 +275,4 @@
.remove = __devexit_p(d7s_remove),
};
-static int __init d7s_init(void)
-{
- return platform_driver_register(&d7s_driver);
-}
-
-static void __exit d7s_exit(void)
-{
- platform_driver_unregister(&d7s_driver);
-}
-
-module_init(d7s_init);
-module_exit(d7s_exit);
+module_platform_driver(d7s_driver);
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index be7b4e5..339fd6f 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -1138,16 +1138,6 @@
.remove = __devexit_p(envctrl_remove),
};
-static int __init envctrl_init(void)
-{
- return platform_driver_register(&envctrl_driver);
-}
+module_platform_driver(envctrl_driver);
-static void __exit envctrl_exit(void)
-{
- platform_driver_unregister(&envctrl_driver);
-}
-
-module_init(envctrl_init);
-module_exit(envctrl_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 73dd4e7..826157f 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -216,16 +216,6 @@
.remove = __devexit_p(flash_remove),
};
-static int __init flash_init(void)
-{
- return platform_driver_register(&flash_driver);
-}
+module_platform_driver(flash_driver);
-static void __exit flash_cleanup(void)
-{
- platform_driver_unregister(&flash_driver);
-}
-
-module_init(flash_init);
-module_exit(flash_cleanup);
MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index ebce963..0b31658 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -435,16 +435,6 @@
};
-static int __init uctrl_init(void)
-{
- return platform_driver_register(&uctrl_driver);
-}
+module_platform_driver(uctrl_driver);
-static void __exit uctrl_exit(void)
-{
- platform_driver_unregister(&uctrl_driver);
-}
-
-module_init(uctrl_init);
-module_exit(uctrl_exit);
MODULE_LICENSE("GPL");
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 019a716..dcf7e10 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -971,6 +971,7 @@
struct s3c64xx_spi_info *sci;
struct spi_master *master;
int ret;
+ char clk_name[16];
if (pdev->id < 0) {
dev_err(&pdev->dev,
@@ -984,11 +985,6 @@
}
sci = pdev->dev.platform_data;
- if (!sci->src_clk_name) {
- dev_err(&pdev->dev,
- "Board init must call s3c64xx_spi_set_info()\n");
- return -EINVAL;
- }
/* Check for availability of necessary resource */
@@ -1073,17 +1069,17 @@
goto err4;
}
- sdd->src_clk = clk_get(&pdev->dev, sci->src_clk_name);
+ sprintf(clk_name, "spi_busclk%d", sci->src_clk_nr);
+ sdd->src_clk = clk_get(&pdev->dev, clk_name);
if (IS_ERR(sdd->src_clk)) {
dev_err(&pdev->dev,
- "Unable to acquire clock '%s'\n", sci->src_clk_name);
+ "Unable to acquire clock '%s'\n", clk_name);
ret = PTR_ERR(sdd->src_clk);
goto err5;
}
if (clk_enable(sdd->src_clk)) {
- dev_err(&pdev->dev, "Couldn't enable clock '%s'\n",
- sci->src_clk_name);
+ dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
ret = -EBUSY;
goto err6;
}
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 84c934c..520e828 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -517,10 +517,14 @@
static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
{
- ssb_pcicore_fix_sprom_core_index(pc);
+ struct ssb_device *pdev = pc->dev;
+ struct ssb_bus *bus = pdev->bus;
+
+ if (bus->bustype == SSB_BUSTYPE_PCI)
+ ssb_pcicore_fix_sprom_core_index(pc);
/* Disable PCI interrupts. */
- ssb_write32(pc->dev, SSB_INTVEC, 0);
+ ssb_write32(pdev, SSB_INTVEC, 0);
/* Additional PCIe always once-executed workarounds */
if (pc->dev->id.coreid == SSB_DEV_PCIE) {
diff --git a/drivers/staging/rtl8712/usb_intf.c b/drivers/staging/rtl8712/usb_intf.c
index fb2e89c..5385da2 100644
--- a/drivers/staging/rtl8712/usb_intf.c
+++ b/drivers/staging/rtl8712/usb_intf.c
@@ -89,6 +89,7 @@
{USB_DEVICE(0x0DF6, 0x0045)},
{USB_DEVICE(0x0DF6, 0x0059)}, /* 11n mode disable */
{USB_DEVICE(0x0DF6, 0x004B)},
+ {USB_DEVICE(0x0DF6, 0x005D)},
{USB_DEVICE(0x0DF6, 0x0063)},
/* Sweex */
{USB_DEVICE(0x177F, 0x0154)},
diff --git a/drivers/staging/tidspbridge/core/dsp-clock.c b/drivers/staging/tidspbridge/core/dsp-clock.c
index 3d1279c..7eb5617 100644
--- a/drivers/staging/tidspbridge/core/dsp-clock.c
+++ b/drivers/staging/tidspbridge/core/dsp-clock.c
@@ -54,6 +54,7 @@
/* Bridge GPT id (1 - 4), DM Timer id (5 - 8) */
#define DMT_ID(id) ((id) + 4)
+#define DM_TIMER_CLOCKS 4
/* Bridge MCBSP id (6 - 10), OMAP Mcbsp id (0 - 4) */
#define MCBSP_ID(id) ((id) - 6)
@@ -114,8 +115,13 @@
*/
void dsp_clk_exit(void)
{
+ int i;
+
dsp_clock_disable_all(dsp_clocks);
+ for (i = 0; i < DM_TIMER_CLOCKS; i++)
+ omap_dm_timer_free(timer[i]);
+
clk_put(iva2_clk);
clk_put(ssi.sst_fck);
clk_put(ssi.ssr_fck);
@@ -130,9 +136,13 @@
void dsp_clk_init(void)
{
static struct platform_device dspbridge_device;
+ int i, id;
dspbridge_device.dev.bus = &platform_bus_type;
+ for (i = 0, id = 5; i < DM_TIMER_CLOCKS; i++, id++)
+ timer[i] = omap_dm_timer_request_specific(id);
+
iva2_clk = clk_get(&dspbridge_device.dev, "iva2_ck");
if (IS_ERR(iva2_clk))
dev_err(bridge, "failed to get iva2 clock %p\n", iva2_clk);
@@ -204,8 +214,7 @@
clk_enable(iva2_clk);
break;
case GPT_CLK:
- timer[clk_id - 1] =
- omap_dm_timer_request_specific(DMT_ID(clk_id));
+ status = omap_dm_timer_start(timer[clk_id - 1]);
break;
#ifdef CONFIG_OMAP_MCBSP
case MCBSP_CLK:
@@ -281,7 +290,7 @@
clk_disable(iva2_clk);
break;
case GPT_CLK:
- omap_dm_timer_free(timer[clk_id - 1]);
+ status = omap_dm_timer_stop(timer[clk_id - 1]);
break;
#ifdef CONFIG_OMAP_MCBSP
case MCBSP_CLK:
diff --git a/drivers/staging/tidspbridge/rmgr/drv_interface.c b/drivers/staging/tidspbridge/rmgr/drv_interface.c
index c43c7e3..76cfc6e 100644
--- a/drivers/staging/tidspbridge/rmgr/drv_interface.c
+++ b/drivers/staging/tidspbridge/rmgr/drv_interface.c
@@ -24,11 +24,7 @@
#include <linux/types.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
-
-#ifdef MODULE
#include <linux/module.h>
-#endif
-
#include <linux/device.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 925a1e5..fb89b85d 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -457,7 +457,7 @@
config SERIAL_SAMSUNG_UARTS_4
bool
depends on ARM && PLAT_SAMSUNG
- default y if CPU_S3C2443
+ default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
@@ -465,7 +465,7 @@
int
depends on ARM && PLAT_SAMSUNG
default 6 if ARCH_S5P6450
- default 4 if SERIAL_SAMSUNG_UARTS_4
+ default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
Select the number of available UART ports for the Samsung S3C
@@ -495,47 +495,6 @@
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_S3C2410
- tristate "Samsung S3C2410 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2410
- default y if CPU_S3C2410
- help
- Serial port support for the Samsung S3C2410 SoC
-
-config SERIAL_S3C2412
- tristate "Samsung S3C2412/S3C2413 Serial port support"
- depends on SERIAL_SAMSUNG && CPU_S3C2412
- default y if CPU_S3C2412
- help
- Serial port support for the Samsung S3C2412 and S3C2413 SoC
-
-config SERIAL_S3C2440
- tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416)
- default y if CPU_S3C2440
- default y if CPU_S3C2442
- select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416
- help
- Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC
-
-config SERIAL_S3C6400
- tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100)
- select SERIAL_SAMSUNG_UARTS_4
- default y
- help
- Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450
- and S5PC100 SoCs
-
-config SERIAL_S5PV210
- tristate "Samsung S5PV210 Serial port support"
- depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212)
- default y
- help
- Serial port support for Samsung's S5P Family of SoC's
-
-
config SERIAL_MAX3100
tristate "MAX3100 support"
depends on SPI
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index e10cf5b..84bc2e5 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -39,11 +39,6 @@
obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
-obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o
-obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o
-obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o
-obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o
-obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o
obj-$(CONFIG_SERIAL_MAX3100) += max3100.o
obj-$(CONFIG_SERIAL_MAX3107) += max3107.o
obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o
diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c
deleted file mode 100644
index b1d7e7c..0000000
--- a/drivers/tty/serial/s3c2410.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Driver for Samsung S3C2410 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2410_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2410_UCON_UCLK;
- else
- ucon &= ~S3C2410_UCON_UCLK;
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-static int s3c2410_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
- clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk";
-
- return 0;
-}
-
-static int s3c2410_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- wr_regl(port, S3C2410_UCON, cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2410_uart_inf = {
- .name = "Samsung S3C2410 UART",
- .type = PORT_S3C2410,
- .fifosize = 16,
- .rx_fifomask = S3C2410_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2410_UFSTAT_RXFULL,
- .tx_fifofull = S3C2410_UFSTAT_TXFULL,
- .tx_fifomask = S3C2410_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2410_serial_getsource,
- .set_clksrc = s3c2410_serial_setsource,
- .reset_port = s3c2410_serial_resetport,
-};
-
-static int s3c2410_serial_probe(struct platform_device *dev)
-{
- return s3c24xx_serial_probe(dev, &s3c2410_uart_inf);
-}
-
-static struct platform_driver s3c2410_serial_driver = {
- .probe = s3c2410_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2410-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2410_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf);
-}
-
-static void __exit s3c2410_serial_exit(void)
-{
- platform_driver_unregister(&s3c2410_serial_driver);
-}
-
-module_init(s3c2410_serial_init);
-module_exit(s3c2410_serial_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver");
-MODULE_ALIAS("platform:s3c2410-uart");
diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c
deleted file mode 100644
index 2234bf9..0000000
--- a/drivers/tty/serial/s3c2412.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-static int s3c2412_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= ~S3C2412_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "usysclk") == 0)
- ucon |= S3C2412_UCON_USYSCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2412_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- switch (ucon & S3C2412_UCON_CLKMASK) {
- case S3C2412_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2412_UCON_PCLK:
- case S3C2412_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2412_UCON_USYSCLK:
- clk->divisor = 1;
- clk->name = "usysclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2412_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("%s: port=%p (%08lx), cfg=%p\n",
- __func__, port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C2412_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2412_uart_inf = {
- .name = "Samsung S3C2412 UART",
- .type = PORT_S3C2412,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2412_serial_getsource,
- .set_clksrc = s3c2412_serial_setsource,
- .reset_port = s3c2412_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2412_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2412_uart_inf);
-}
-
-static struct platform_driver s3c2412_serial_driver = {
- .probe = s3c2412_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2412-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static inline int s3c2412_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf);
-}
-
-static inline void s3c2412_serial_exit(void)
-{
- platform_driver_unregister(&s3c2412_serial_driver);
-}
-
-module_init(s3c2412_serial_init);
-module_exit(s3c2412_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2412-uart");
diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c
deleted file mode 100644
index 1d0c324..0000000
--- a/drivers/tty/serial/s3c2440.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs.
- *
- * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-#include <mach/regs-gpio.h>
-
-#include "samsung.h"
-
-
-static int s3c2440_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- /* todo - proper fclk<>nonfclk switch. */
-
- ucon &= ~S3C2440_UCON_CLKMASK;
-
- if (strcmp(clk->name, "uclk") == 0)
- ucon |= S3C2440_UCON_UCLK;
- else if (strcmp(clk->name, "pclk") == 0)
- ucon |= S3C2440_UCON_PCLK;
- else if (strcmp(clk->name, "fclk") == 0)
- ucon |= S3C2440_UCON_FCLK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c2440_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
- unsigned long ucon0, ucon1, ucon2;
-
- switch (ucon & S3C2440_UCON_CLKMASK) {
- case S3C2440_UCON_UCLK:
- clk->divisor = 1;
- clk->name = "uclk";
- break;
-
- case S3C2440_UCON_PCLK:
- case S3C2440_UCON_PCLK2:
- clk->divisor = 1;
- clk->name = "pclk";
- break;
-
- case S3C2440_UCON_FCLK:
- /* the fun of calculating the uart divisors on
- * the s3c2440 */
-
- ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
- ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
- ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
- printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2);
-
- ucon0 &= S3C2440_UCON0_DIVMASK;
- ucon1 &= S3C2440_UCON1_DIVMASK;
- ucon2 &= S3C2440_UCON2_DIVMASK;
-
- if (ucon0 != 0) {
- clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 6;
- } else if (ucon1 != 0) {
- clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 21;
- } else if (ucon2 != 0) {
- clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT;
- clk->divisor += 36;
- } else {
- /* manual calims 44, seems to be 9 */
- clk->divisor = 9;
- }
-
- clk->name = "fclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c2440_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= (S3C2440_UCON0_DIVMASK | (3<<10));
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c2440_uart_inf = {
- .name = "Samsung S3C2440 UART",
- .type = PORT_S3C2440,
- .fifosize = 64,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c2440_serial_getsource,
- .set_clksrc = s3c2440_serial_setsource,
- .reset_port = s3c2440_serial_resetport,
-};
-
-/* device management */
-
-static int s3c2440_serial_probe(struct platform_device *dev)
-{
- dbg("s3c2440_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c2440_uart_inf);
-}
-
-static struct platform_driver s3c2440_serial_driver = {
- .probe = s3c2440_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c2440-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c2440_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf);
-}
-
-static void __exit s3c2440_serial_exit(void)
-{
- platform_driver_unregister(&s3c2440_serial_driver);
-}
-
-module_init(s3c2440_serial_init);
-module_exit(s3c2440_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c2440-uart");
diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c
deleted file mode 100644
index e2f6913..0000000
--- a/drivers/tty/serial/s3c6400.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs.
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-
-#include <plat/regs-serial.h>
-
-#include "samsung.h"
-
-static int s3c6400_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (strcmp(clk->name, "uclk0") == 0) {
- ucon &= ~S3C6400_UCON_CLKMASK;
- ucon |= S3C6400_UCON_UCLK0;
- } else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S3C6400_UCON_UCLK1;
- else if (strcmp(clk->name, "pclk") == 0) {
- /* See notes about transitioning from UCLK to PCLK */
- ucon &= ~S3C6400_UCON_UCLK0;
- } else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s3c6400_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- switch (ucon & S3C6400_UCON_CLKMASK) {
- case S3C6400_UCON_UCLK0:
- clk->name = "uclk0";
- break;
-
- case S3C6400_UCON_UCLK1:
- clk->name = "uclk1";
- break;
-
- case S3C6400_UCON_PCLK:
- case S3C6400_UCON_PCLK2:
- clk->name = "pclk";
- break;
- }
-
- return 0;
-}
-
-static int s3c6400_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n",
- port, port->mapbase, cfg);
-
- /* ensure we don't change the clock settings... */
-
- ucon &= S3C6400_UCON_CLKMASK;
-
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
-
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- return 0;
-}
-
-static struct s3c24xx_uart_info s3c6400_uart_inf = {
- .name = "Samsung S3C6400 UART",
- .type = PORT_S3C6400,
- .fifosize = 64,
- .has_divslot = 1,
- .rx_fifomask = S3C2440_UFSTAT_RXMASK,
- .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
- .rx_fifofull = S3C2440_UFSTAT_RXFULL,
- .tx_fifofull = S3C2440_UFSTAT_TXFULL,
- .tx_fifomask = S3C2440_UFSTAT_TXMASK,
- .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
- .get_clksrc = s3c6400_serial_getsource,
- .set_clksrc = s3c6400_serial_setsource,
- .reset_port = s3c6400_serial_resetport,
-};
-
-/* device management */
-
-static int s3c6400_serial_probe(struct platform_device *dev)
-{
- dbg("s3c6400_serial_probe: dev=%p\n", dev);
- return s3c24xx_serial_probe(dev, &s3c6400_uart_inf);
-}
-
-static struct platform_driver s3c6400_serial_driver = {
- .probe = s3c6400_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s3c6400-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s3c6400_serial_init(void)
-{
- return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf);
-}
-
-static void __exit s3c6400_serial_exit(void)
-{
- platform_driver_unregister(&s3c6400_serial_driver);
-}
-
-module_init(s3c6400_serial_init);
-module_exit(s3c6400_serial_exit);
-
-MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver");
-MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:s3c6400-uart");
diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c
deleted file mode 100644
index 8b0b888..0000000
--- a/drivers/tty/serial/s5pv210.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/*
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Based on drivers/serial/s3c6400.c
- *
- * Driver for Samsung S5PV210 SoC UARTs.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/delay.h>
-
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <plat/regs-serial.h>
-#include "samsung.h"
-
-static int s5pv210_serial_setsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- if (strcmp(clk->name, "pclk") == 0)
- ucon &= ~S5PV210_UCON_CLKMASK;
- else if (strcmp(clk->name, "uclk1") == 0)
- ucon |= S5PV210_UCON_CLKMASK;
- else {
- printk(KERN_ERR "unknown clock source %s\n", clk->name);
- return -EINVAL;
- }
-
- wr_regl(port, S3C2410_UCON, ucon);
- return 0;
-}
-
-
-static int s5pv210_serial_getsource(struct uart_port *port,
- struct s3c24xx_uart_clksrc *clk)
-{
- struct s3c2410_uartcfg *cfg = port->dev->platform_data;
- u32 ucon = rd_regl(port, S3C2410_UCON);
-
- clk->divisor = 1;
-
- if (cfg->flags & NO_NEED_CHECK_CLKSRC)
- return 0;
-
- switch (ucon & S5PV210_UCON_CLKMASK) {
- case S5PV210_UCON_PCLK:
- clk->name = "pclk";
- break;
- case S5PV210_UCON_UCLK:
- clk->name = "uclk1";
- break;
- }
-
- return 0;
-}
-
-static int s5pv210_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
-{
- unsigned long ucon = rd_regl(port, S3C2410_UCON);
-
- ucon &= S5PV210_UCON_CLKMASK;
- wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
- wr_regl(port, S3C2410_ULCON, cfg->ulcon);
-
- /* reset both fifos */
- wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
- wr_regl(port, S3C2410_UFCON, cfg->ufcon);
-
- /* It is need to delay When reset FIFO register */
- udelay(1);
-
- return 0;
-}
-
-#define S5PV210_UART_DEFAULT_INFO(fifo_size) \
- .name = "Samsung S5PV210 UART0", \
- .type = PORT_S3C6400, \
- .fifosize = fifo_size, \
- .has_divslot = 1, \
- .rx_fifomask = S5PV210_UFSTAT_RXMASK, \
- .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \
- .rx_fifofull = S5PV210_UFSTAT_RXFULL, \
- .tx_fifofull = S5PV210_UFSTAT_TXFULL, \
- .tx_fifomask = S5PV210_UFSTAT_TXMASK, \
- .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \
- .get_clksrc = s5pv210_serial_getsource, \
- .set_clksrc = s5pv210_serial_setsource, \
- .reset_port = s5pv210_serial_resetport
-
-static struct s3c24xx_uart_info s5p_port_fifo256 = {
- S5PV210_UART_DEFAULT_INFO(256),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo64 = {
- S5PV210_UART_DEFAULT_INFO(64),
-};
-
-static struct s3c24xx_uart_info s5p_port_fifo16 = {
- S5PV210_UART_DEFAULT_INFO(16),
-};
-
-static struct s3c24xx_uart_info *s5p_uart_inf[] = {
- [0] = &s5p_port_fifo256,
- [1] = &s5p_port_fifo64,
- [2] = &s5p_port_fifo16,
- [3] = &s5p_port_fifo16,
-};
-
-/* device management */
-static int s5p_serial_probe(struct platform_device *pdev)
-{
- return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]);
-}
-
-static struct platform_driver s5p_serial_driver = {
- .probe = s5p_serial_probe,
- .remove = __devexit_p(s3c24xx_serial_remove),
- .driver = {
- .name = "s5pv210-uart",
- .owner = THIS_MODULE,
- },
-};
-
-static int __init s5p_serial_init(void)
-{
- return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf);
-}
-
-static void __exit s5p_serial_exit(void)
-{
- platform_driver_unregister(&s5p_serial_driver);
-}
-
-module_init(s5p_serial_init);
-module_exit(s5p_serial_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:s5pv210-uart");
-MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support");
-MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index b31f1c3..f96f37b 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -42,6 +42,7 @@
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/of.h>
#include <asm/irq.h>
@@ -49,6 +50,7 @@
#include <mach/map.h>
#include <plat/regs-serial.h>
+#include <plat/clock.h>
#include "samsung.h"
@@ -190,10 +192,13 @@
static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port)
{
+ struct s3c24xx_uart_port *ourport;
+
if (port->dev == NULL)
return NULL;
- return (struct s3c2410_uartcfg *)port->dev->platform_data;
+ ourport = container_of(port, struct s3c24xx_uart_port, port);
+ return ourport->cfg;
}
static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport,
@@ -202,7 +207,7 @@
struct s3c24xx_uart_info *info = ourport->info;
if (ufstat & info->rx_fifofull)
- return info->fifosize;
+ return ourport->port.fifosize;
return (ufstat & info->rx_fifomask) >> info->rx_fifoshift;
}
@@ -555,154 +560,98 @@
*
*/
+#define MAX_CLK_NAME_LENGTH 15
-#define MAX_CLKS (8)
-
-static struct s3c24xx_uart_clksrc tmp_clksrc = {
- .name = "pclk",
- .min_baud = 0,
- .max_baud = 0,
- .divisor = 1,
-};
-
-static inline int
-s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
+static inline int s3c24xx_serial_getsource(struct uart_port *port)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- return (info->get_clksrc)(port, c);
-}
-
-static inline int
-s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
-{
- struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
-
- return (info->set_clksrc)(port, c);
-}
-
-struct baud_calc {
- struct s3c24xx_uart_clksrc *clksrc;
- unsigned int calc;
- unsigned int divslot;
- unsigned int quot;
- struct clk *src;
-};
-
-static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
- struct uart_port *port,
- struct s3c24xx_uart_clksrc *clksrc,
- unsigned int baud)
-{
- struct s3c24xx_uart_port *ourport = to_ourport(port);
- unsigned long rate;
-
- calc->src = clk_get(port->dev, clksrc->name);
- if (calc->src == NULL || IS_ERR(calc->src))
+ if (info->num_clks == 1)
return 0;
- rate = clk_get_rate(calc->src);
- rate /= clksrc->divisor;
-
- calc->clksrc = clksrc;
-
- if (ourport->info->has_divslot) {
- unsigned long div = rate / baud;
-
- /* The UDIVSLOT register on the newer UARTs allows us to
- * get a divisor adjustment of 1/16th on the baud clock.
- *
- * We don't keep the UDIVSLOT value (the 16ths we calculated
- * by not multiplying the baud by 16) as it is easy enough
- * to recalculate.
- */
-
- calc->quot = div / 16;
- calc->calc = rate / div;
- } else {
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
- }
-
- calc->quot--;
- return 1;
+ ucon = rd_regl(port, S3C2410_UCON);
+ ucon &= info->clksel_mask;
+ return ucon >> info->clksel_shift;
}
-static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
- struct s3c24xx_uart_clksrc **clksrc,
- struct clk **clk,
- unsigned int baud)
+static void s3c24xx_serial_setsource(struct uart_port *port,
+ unsigned int clk_sel)
{
- struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
- struct s3c24xx_uart_clksrc *clkp;
- struct baud_calc res[MAX_CLKS];
- struct baud_calc *resptr, *best, *sptr;
- int i;
+ struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned int ucon;
- clkp = cfg->clocks;
- best = NULL;
+ if (info->num_clks == 1)
+ return;
- if (cfg->clocks_size < 2) {
- if (cfg->clocks_size == 0)
- clkp = &tmp_clksrc;
+ ucon = rd_regl(port, S3C2410_UCON);
+ if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel)
+ return;
- /* check to see if we're sourcing fclk, and if so we're
- * going to have to update the clock source
- */
+ ucon &= ~info->clksel_mask;
+ ucon |= clk_sel << info->clksel_shift;
+ wr_regl(port, S3C2410_UCON, ucon);
+}
- if (strcmp(clkp->name, "fclk") == 0) {
- struct s3c24xx_uart_clksrc src;
+static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport,
+ unsigned int req_baud, struct clk **best_clk,
+ unsigned int *clk_num)
+{
+ struct s3c24xx_uart_info *info = ourport->info;
+ struct clk *clk;
+ unsigned long rate;
+ unsigned int cnt, baud, quot, clk_sel, best_quot = 0;
+ char clkname[MAX_CLK_NAME_LENGTH];
+ int calc_deviation, deviation = (1 << 30) - 1;
- s3c24xx_serial_getsource(port, &src);
+ *best_clk = NULL;
+ clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel :
+ ourport->info->def_clk_sel;
+ for (cnt = 0; cnt < info->num_clks; cnt++) {
+ if (!(clk_sel & (1 << cnt)))
+ continue;
- /* check that the port already using fclk, and if
- * not, then re-select fclk
+ sprintf(clkname, "clk_uart_baud%d", cnt);
+ clk = clk_get(ourport->port.dev, clkname);
+ if (IS_ERR_OR_NULL(clk))
+ continue;
+
+ rate = clk_get_rate(clk);
+ if (!rate)
+ continue;
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / req_baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we
+ * calculated by not multiplying the baud by 16) as it
+ * is easy enough to recalculate.
*/
- if (strcmp(src.name, clkp->name) == 0) {
- s3c24xx_serial_setsource(port, clkp);
- s3c24xx_serial_getsource(port, &src);
- }
-
- clkp->divisor = src.divisor;
+ quot = div / 16;
+ baud = rate / div;
+ } else {
+ quot = (rate + (8 * req_baud)) / (16 * req_baud);
+ baud = rate / (quot * 16);
}
+ quot--;
- s3c24xx_serial_calcbaud(res, port, clkp, baud);
- best = res;
- resptr = best + 1;
- } else {
- resptr = res;
+ calc_deviation = req_baud - baud;
+ if (calc_deviation < 0)
+ calc_deviation = -calc_deviation;
- for (i = 0; i < cfg->clocks_size; i++, clkp++) {
- if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud))
- resptr++;
+ if (calc_deviation < deviation) {
+ *best_clk = clk;
+ best_quot = quot;
+ *clk_num = cnt;
+ deviation = calc_deviation;
}
}
- /* ok, we now need to select the best clock we found */
-
- if (!best) {
- unsigned int deviation = (1<<30)|((1<<30)-1);
- int calc_deviation;
-
- for (sptr = res; sptr < resptr; sptr++) {
- calc_deviation = baud - sptr->calc;
- if (calc_deviation < 0)
- calc_deviation = -calc_deviation;
-
- if (calc_deviation < deviation) {
- best = sptr;
- deviation = calc_deviation;
- }
- }
- }
-
- /* store results to pass back */
-
- *clksrc = best->clksrc;
- *clk = best->src;
-
- return best->quot;
+ return best_quot;
}
/* udivslot_table[]
@@ -735,10 +684,9 @@
{
struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- struct s3c24xx_uart_clksrc *clksrc = NULL;
struct clk *clk = NULL;
unsigned long flags;
- unsigned int baud, quot;
+ unsigned int baud, quot, clk_sel = 0;
unsigned int ulcon;
unsigned int umcon;
unsigned int udivslot = 0;
@@ -754,17 +702,16 @@
*/
baud = uart_get_baud_rate(port, termios, old, 0, 115200*8);
-
+ quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel);
if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
quot = port->custom_divisor;
- else
- quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud);
+ if (!clk)
+ return;
/* check to see if we need to change clock source */
- if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
- dbg("selecting clock %p\n", clk);
- s3c24xx_serial_setsource(port, clksrc);
+ if (ourport->baudclk != clk) {
+ s3c24xx_serial_setsource(port, clk_sel);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
clk_disable(ourport->baudclk);
@@ -773,7 +720,6 @@
clk_enable(clk);
- ourport->clksrc = clksrc;
ourport->baudclk = clk;
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
@@ -1020,16 +966,29 @@
/* s3c24xx_serial_resetport
*
- * wrapper to call the specific reset for this port (reset the fifos
- * and the settings)
+ * reset the fifos and other the settings.
*/
-static inline int s3c24xx_serial_resetport(struct uart_port *port,
- struct s3c2410_uartcfg *cfg)
+static void s3c24xx_serial_resetport(struct uart_port *port,
+ struct s3c2410_uartcfg *cfg)
{
struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port);
+ unsigned long ucon = rd_regl(port, S3C2410_UCON);
+ unsigned int ucon_mask;
- return (info->reset_port)(port, cfg);
+ ucon_mask = info->clksel_mask;
+ if (info->type == PORT_S3C2440)
+ ucon_mask |= S3C2440_UCON0_DIVMASK;
+
+ ucon &= ucon_mask;
+ wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+
+ /* reset both fifos */
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
+ wr_regl(port, S3C2410_UFCON, cfg->ufcon);
+
+ /* some delay is required after fifo reset */
+ udelay(1);
}
@@ -1121,11 +1080,10 @@
*/
static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
- struct s3c24xx_uart_info *info,
struct platform_device *platdev)
{
struct uart_port *port = &ourport->port;
- struct s3c2410_uartcfg *cfg;
+ struct s3c2410_uartcfg *cfg = ourport->cfg;
struct resource *res;
int ret;
@@ -1134,30 +1092,16 @@
if (platdev == NULL)
return -ENODEV;
- cfg = s3c24xx_dev_to_cfg(&platdev->dev);
-
if (port->mapbase != 0)
return 0;
- if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) {
- printk(KERN_ERR "%s: port %d bigger than %d\n", __func__,
- cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS);
- return -ERANGE;
- }
-
/* setup info for port */
port->dev = &platdev->dev;
- ourport->info = info;
/* Startup sequence is different for s3c64xx and higher SoC's */
if (s3c24xx_serial_has_interrupt_mask(port))
s3c24xx_serial_ops.startup = s3c64xx_serial_startup;
- /* copy the info in from provided structure */
- ourport->port.fifosize = info->fifosize;
-
- dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport);
-
port->uartclk = 1;
if (cfg->uart_flags & UPF_CONS_FLOW) {
@@ -1215,43 +1159,74 @@
struct uart_port *port = s3c24xx_dev_to_port(dev);
struct s3c24xx_uart_port *ourport = to_ourport(port);
- return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name);
+ return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name);
}
static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL);
+
/* Device driver serial port probe */
+static const struct of_device_id s3c24xx_uart_dt_match[];
static int probe_index;
-int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *info)
+static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data(
+ struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+ if (pdev->dev.of_node) {
+ const struct of_device_id *match;
+ match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node);
+ return (struct s3c24xx_serial_drv_data *)match->data;
+ }
+#endif
+ return (struct s3c24xx_serial_drv_data *)
+ platform_get_device_id(pdev)->driver_data;
+}
+
+static int s3c24xx_serial_probe(struct platform_device *pdev)
{
struct s3c24xx_uart_port *ourport;
int ret;
- dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index);
+ dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index);
ourport = &s3c24xx_serial_ports[probe_index];
+
+ ourport->drv_data = s3c24xx_get_driver_data(pdev);
+ if (!ourport->drv_data) {
+ dev_err(&pdev->dev, "could not find driver data\n");
+ return -ENODEV;
+ }
+
+ ourport->info = ourport->drv_data->info;
+ ourport->cfg = (pdev->dev.platform_data) ?
+ (struct s3c2410_uartcfg *)pdev->dev.platform_data :
+ ourport->drv_data->def_cfg;
+
+ ourport->port.fifosize = (ourport->info->fifosize) ?
+ ourport->info->fifosize :
+ ourport->drv_data->fifosize[probe_index];
+
probe_index++;
dbg("%s: initialising port %p...\n", __func__, ourport);
- ret = s3c24xx_serial_init_port(ourport, info, dev);
+ ret = s3c24xx_serial_init_port(ourport, pdev);
if (ret < 0)
goto probe_err;
dbg("%s: adding port\n", __func__);
uart_add_one_port(&s3c24xx_uart_drv, &ourport->port);
- platform_set_drvdata(dev, &ourport->port);
+ platform_set_drvdata(pdev, &ourport->port);
- ret = device_create_file(&dev->dev, &dev_attr_clock_source);
+ ret = device_create_file(&pdev->dev, &dev_attr_clock_source);
if (ret < 0)
- printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__);
+ dev_err(&pdev->dev, "failed to add clock source attr.\n");
ret = s3c24xx_serial_cpufreq_register(ourport);
if (ret < 0)
- dev_err(&dev->dev, "failed to add cpufreq notifier\n");
+ dev_err(&pdev->dev, "failed to add cpufreq notifier\n");
return 0;
@@ -1259,9 +1234,7 @@
return ret;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_probe);
-
-int __devexit s3c24xx_serial_remove(struct platform_device *dev)
+static int __devexit s3c24xx_serial_remove(struct platform_device *dev)
{
struct uart_port *port = s3c24xx_dev_to_port(&dev->dev);
@@ -1274,8 +1247,6 @@
return 0;
}
-EXPORT_SYMBOL_GPL(s3c24xx_serial_remove);
-
/* UART power management code */
#ifdef CONFIG_PM_SLEEP
static int s3c24xx_serial_suspend(struct device *dev)
@@ -1315,41 +1286,6 @@
#define SERIAL_SAMSUNG_PM_OPS NULL
#endif /* CONFIG_PM_SLEEP */
-int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info)
-{
- dbg("s3c24xx_serial_init(%p,%p)\n", drv, info);
-
- drv->driver.pm = SERIAL_SAMSUNG_PM_OPS;
-
- return platform_driver_register(drv);
-}
-
-EXPORT_SYMBOL_GPL(s3c24xx_serial_init);
-
-/* module initialisation code */
-
-static int __init s3c24xx_serial_modinit(void)
-{
- int ret;
-
- ret = uart_register_driver(&s3c24xx_uart_drv);
- if (ret < 0) {
- printk(KERN_ERR "failed to register UART driver\n");
- return -1;
- }
-
- return 0;
-}
-
-static void __exit s3c24xx_serial_modexit(void)
-{
- uart_unregister_driver(&s3c24xx_uart_drv);
-}
-
-module_init(s3c24xx_serial_modinit);
-module_exit(s3c24xx_serial_modexit);
-
/* Console code */
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
@@ -1395,12 +1331,13 @@
s3c24xx_serial_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
- struct s3c24xx_uart_clksrc clksrc;
struct clk *clk;
unsigned int ulcon;
unsigned int ucon;
unsigned int ubrdiv;
unsigned long rate;
+ unsigned int clk_sel;
+ char clk_name[MAX_CLK_NAME_LENGTH];
ulcon = rd_regl(port, S3C2410_ULCON);
ucon = rd_regl(port, S3C2410_UCON);
@@ -1445,44 +1382,21 @@
/* now calculate the baud rate */
- s3c24xx_serial_getsource(port, &clksrc);
+ clk_sel = s3c24xx_serial_getsource(port);
+ sprintf(clk_name, "clk_uart_baud%d", clk_sel);
- clk = clk_get(port->dev, clksrc.name);
+ clk = clk_get(port->dev, clk_name);
if (!IS_ERR(clk) && clk != NULL)
- rate = clk_get_rate(clk) / clksrc.divisor;
+ rate = clk_get_rate(clk);
else
rate = 1;
-
*baud = rate / (16 * (ubrdiv + 1));
dbg("calculated baud %d\n", *baud);
}
}
-/* s3c24xx_serial_init_ports
- *
- * initialise the serial ports from the machine provided initialisation
- * data.
-*/
-
-static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info)
-{
- struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports;
- struct platform_device **platdev_ptr;
- int i;
-
- dbg("s3c24xx_serial_init_ports: initialising ports...\n");
-
- platdev_ptr = s3c24xx_uart_devs;
-
- for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) {
- s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr);
- }
-
- return 0;
-}
-
static int __init
s3c24xx_serial_console_setup(struct console *co, char *options)
{
@@ -1526,11 +1440,6 @@
return uart_set_options(port, co, baud, parity, bits, flow);
}
-/* s3c24xx_serial_initconsole
- *
- * initialise the console from one of the uart drivers
-*/
-
static struct console s3c24xx_serial_console = {
.name = S3C24XX_SERIAL_NAME,
.device = uart_console_device,
@@ -1540,34 +1449,250 @@
.setup = s3c24xx_serial_console_setup,
.data = &s3c24xx_uart_drv,
};
-
-int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **info)
-
-{
- struct platform_device *dev = s3c24xx_uart_devs[0];
-
- dbg("s3c24xx_serial_initconsole\n");
-
- /* select driver based on the cpu */
-
- if (dev == NULL) {
- printk(KERN_ERR "s3c24xx: no devices for console init\n");
- return 0;
- }
-
- if (strcmp(dev->name, drv->driver.name) != 0)
- return 0;
-
- s3c24xx_serial_console.data = &s3c24xx_uart_drv;
- s3c24xx_serial_init_ports(info);
-
- register_console(&s3c24xx_serial_console);
- return 0;
-}
-
#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */
+#ifdef CONFIG_CPU_S3C2410
+static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2410 UART",
+ .type = PORT_S3C2410,
+ .fifosize = 16,
+ .rx_fifomask = S3C2410_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2410_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2410_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2410_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S3C2410_UCON_CLKMASK,
+ .clksel_shift = S3C2410_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data)
+#else
+#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2412 UART",
+ .type = PORT_S3C2412,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data)
+#else
+#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \
+ defined(CONFIG_CPU_S3C2443)
+static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C2440 UART",
+ .type = PORT_S3C2440,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C2412_UCON_CLKMASK,
+ .clksel_shift = S3C2412_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data)
+#else
+#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \
+ defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \
+ defined(CONFIG_CPU_S5PC100)
+static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S3C6400 UART",
+ .type = PORT_S3C6400,
+ .fifosize = 64,
+ .has_divslot = 1,
+ .rx_fifomask = S3C2440_UFSTAT_RXMASK,
+ .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
+ .rx_fifofull = S3C2440_UFSTAT_RXFULL,
+ .tx_fifofull = S3C2440_UFSTAT_TXFULL,
+ .tx_fifomask = S3C2440_UFSTAT_TXMASK,
+ .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL2,
+ .num_clks = 4,
+ .clksel_mask = S3C6400_UCON_CLKMASK,
+ .clksel_shift = S3C6400_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S3C2410_UCON_DEFAULT,
+ .ufcon = S3C2410_UFCON_DEFAULT,
+ },
+};
+#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data)
+#else
+#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+#ifdef CONFIG_CPU_S5PV210
+static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung S5PV210 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 2,
+ .clksel_mask = S5PV210_UCON_CLKMASK,
+ .clksel_shift = S5PV210_UCON_CLKSHIFT,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data)
+#else
+#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+#ifdef CONFIG_CPU_EXYNOS4210
+static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = {
+ .info = &(struct s3c24xx_uart_info) {
+ .name = "Samsung Exynos4 UART",
+ .type = PORT_S3C6400,
+ .has_divslot = 1,
+ .rx_fifomask = S5PV210_UFSTAT_RXMASK,
+ .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT,
+ .rx_fifofull = S5PV210_UFSTAT_RXFULL,
+ .tx_fifofull = S5PV210_UFSTAT_TXFULL,
+ .tx_fifomask = S5PV210_UFSTAT_TXMASK,
+ .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT,
+ .def_clk_sel = S3C2410_UCON_CLKSEL0,
+ .num_clks = 1,
+ .clksel_mask = 0,
+ .clksel_shift = 0,
+ },
+ .def_cfg = &(struct s3c2410_uartcfg) {
+ .ucon = S5PV210_UCON_DEFAULT,
+ .ufcon = S5PV210_UFCON_DEFAULT,
+ .has_fracval = 1,
+ },
+ .fifosize = { 256, 64, 16, 16 },
+};
+#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data)
+#else
+#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL
+#endif
+
+static struct platform_device_id s3c24xx_serial_driver_ids[] = {
+ {
+ .name = "s3c2410-uart",
+ .driver_data = S3C2410_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2412-uart",
+ .driver_data = S3C2412_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c2440-uart",
+ .driver_data = S3C2440_SERIAL_DRV_DATA,
+ }, {
+ .name = "s3c6400-uart",
+ .driver_data = S3C6400_SERIAL_DRV_DATA,
+ }, {
+ .name = "s5pv210-uart",
+ .driver_data = S5PV210_SERIAL_DRV_DATA,
+ }, {
+ .name = "exynos4210-uart",
+ .driver_data = EXYNOS4210_SERIAL_DRV_DATA,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id s3c24xx_uart_dt_match[] = {
+ { .compatible = "samsung,exynos4210-uart",
+ .data = (void *)EXYNOS4210_SERIAL_DRV_DATA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match);
+#else
+#define s3c24xx_uart_dt_match NULL
+#endif
+
+static struct platform_driver samsung_serial_driver = {
+ .probe = s3c24xx_serial_probe,
+ .remove = __devexit_p(s3c24xx_serial_remove),
+ .id_table = s3c24xx_serial_driver_ids,
+ .driver = {
+ .name = "samsung-uart",
+ .owner = THIS_MODULE,
+ .pm = SERIAL_SAMSUNG_PM_OPS,
+ .of_match_table = s3c24xx_uart_dt_match,
+ },
+};
+
+/* module initialisation code */
+
+static int __init s3c24xx_serial_modinit(void)
+{
+ int ret;
+
+ ret = uart_register_driver(&s3c24xx_uart_drv);
+ if (ret < 0) {
+ printk(KERN_ERR "failed to register UART driver\n");
+ return -1;
+ }
+
+ return platform_driver_register(&samsung_serial_driver);
+}
+
+static void __exit s3c24xx_serial_modexit(void)
+{
+ uart_unregister_driver(&s3c24xx_uart_drv);
+}
+
+module_init(s3c24xx_serial_modinit);
+module_exit(s3c24xx_serial_modexit);
+
+MODULE_ALIAS("platform:samsung-uart");
MODULE_DESCRIPTION("Samsung SoC Serial port driver");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h
index 8e87b78..1a4bca3 100644
--- a/drivers/tty/serial/samsung.h
+++ b/drivers/tty/serial/samsung.h
@@ -19,20 +19,25 @@
unsigned long tx_fifomask;
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ unsigned int def_clk_sel;
+ unsigned long num_clks;
+ unsigned long clksel_mask;
+ unsigned long clksel_shift;
/* uart port features */
unsigned int has_divslot:1;
- /* clock source control */
-
- int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
- int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
-
/* uart controls */
int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *);
};
+struct s3c24xx_serial_drv_data {
+ struct s3c24xx_uart_info *info;
+ struct s3c2410_uartcfg *def_cfg;
+ unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+};
+
struct s3c24xx_uart_port {
unsigned char rx_claimed;
unsigned char tx_claimed;
@@ -43,10 +48,13 @@
unsigned int tx_irq;
struct s3c24xx_uart_info *info;
- struct s3c24xx_uart_clksrc *clksrc;
struct clk *clk;
struct clk *baudclk;
struct uart_port port;
+ struct s3c24xx_serial_drv_data *drv_data;
+
+ /* reference to platform data */
+ struct s3c2410_uartcfg *cfg;
#ifdef CONFIG_CPU_FREQ
struct notifier_block freq_transition;
@@ -56,7 +64,6 @@
/* conversion functions */
#define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev)
-#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data)
/* register access controls */
@@ -69,17 +76,6 @@
#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg))
#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-extern int s3c24xx_serial_probe(struct platform_device *dev,
- struct s3c24xx_uart_info *uart);
-
-extern int __devexit s3c24xx_serial_remove(struct platform_device *dev);
-
-extern int s3c24xx_serial_initconsole(struct platform_driver *drv,
- struct s3c24xx_uart_info **uart);
-
-extern int s3c24xx_serial_init(struct platform_driver *drv,
- struct s3c24xx_uart_info *info);
-
#ifdef CONFIG_SERIAL_SAMSUNG_DEBUG
extern void printascii(const char *);
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 791f11b..75823a1 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -48,6 +48,7 @@
default y if ARCH_DAVINCI_DA8XX
default y if ARCH_CNS3XXX
default y if PLAT_SPEAR
+ default y if ARCH_EXYNOS
# PPC:
default y if STB03xxx
default y if PPC_MPC52xx
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e8c564a..a8078d0 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1458,6 +1458,16 @@
},
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
+ /* Motorola H24 HSPA module: */
+ { USB_DEVICE(0x22b8, 0x2d91) }, /* modem */
+ { USB_DEVICE(0x22b8, 0x2d92) }, /* modem + diagnostics */
+ { USB_DEVICE(0x22b8, 0x2d93) }, /* modem + AT port */
+ { USB_DEVICE(0x22b8, 0x2d95) }, /* modem + AT port + diagnostics */
+ { USB_DEVICE(0x22b8, 0x2d96) }, /* modem + NMEA */
+ { USB_DEVICE(0x22b8, 0x2d97) }, /* modem + diagnostics + NMEA */
+ { USB_DEVICE(0x22b8, 0x2d99) }, /* modem + AT port + NMEA */
+ { USB_DEVICE(0x22b8, 0x2d9a) }, /* modem + AT port + diagnostics + NMEA */
+
{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
.driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on
data interface instead of
diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c
index c39d588..1a6f415 100644
--- a/drivers/usb/gadget/f_mass_storage.c
+++ b/drivers/usb/gadget/f_mass_storage.c
@@ -2975,6 +2975,7 @@
fsg_common_put(common);
usb_free_descriptors(fsg->function.descriptors);
usb_free_descriptors(fsg->function.hs_descriptors);
+ usb_free_descriptors(fsg->function.ss_descriptors);
kfree(fsg);
}
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 060e0e2..eea85dc 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -371,6 +371,12 @@
Enables support for the on-chip OHCI controller on the SuperH.
If you use the PCI OHCI controller, this option is not necessary.
+config USB_OHCI_EXYNOS
+ boolean "OHCI support for Samsung EXYNOS SoC Series"
+ depends on USB_OHCI_HCD && ARCH_EXYNOS
+ help
+ Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
+
config USB_CNS3XXX_OHCI
bool "Cavium CNS3XXX OHCI Module"
depends on USB_OHCI_HCD && ARCH_CNS3XXX
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index e39b029..568cefb 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -41,6 +41,7 @@
#include <linux/usb/ulpi.h>
#include <plat/usb.h>
#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
/* EHCI Register Set */
#define EHCI_INSNREG04 (0xA0)
@@ -190,11 +191,8 @@
}
}
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_err(dev, "failed to start usbhs with err %d\n", ret);
- goto err_enable;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
/*
* An undocumented "feature" in the OMAP3 EHCI controller,
@@ -240,11 +238,8 @@
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_enable:
disable_put_regulator(pdata);
- usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
err_io:
iounmap(regs);
@@ -266,10 +261,12 @@
struct usb_hcd *hcd = dev_get_drvdata(dev);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
disable_put_regulator(dev->platform_data);
iounmap(hcd->regs);
usb_put_hcd(hcd);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
return 0;
}
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
new file mode 100644
index 0000000..55aa35a
--- /dev/null
+++ b/drivers/usb/host/ohci-exynos.c
@@ -0,0 +1,274 @@
+/*
+ * SAMSUNG EXYNOS USB HOST OHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <mach/ohci.h>
+#include <plat/usb-phy.h>
+
+struct exynos_ohci_hcd {
+ struct device *dev;
+ struct usb_hcd *hcd;
+ struct clk *clk;
+};
+
+static int ohci_exynos_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ ohci_dbg(ohci, "ohci_exynos_start, ohci:%p", ohci);
+
+ ret = ohci_init(ohci);
+ if (ret < 0)
+ return ret;
+
+ ret = ohci_run(ohci);
+ if (ret < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hc_driver exynos_ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EXYNOS OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY|HCD_USB11,
+
+ .start = ohci_exynos_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ .get_frame_number = ohci_get_frame,
+
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+static int __devinit exynos_ohci_probe(struct platform_device *pdev)
+{
+ struct exynos4_ohci_platdata *pdata;
+ struct exynos_ohci_hcd *exynos_ohci;
+ struct usb_hcd *hcd;
+ struct ohci_hcd *ohci;
+ struct resource *res;
+ int irq;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data defined\n");
+ return -EINVAL;
+ }
+
+ exynos_ohci = kzalloc(sizeof(struct exynos_ohci_hcd), GFP_KERNEL);
+ if (!exynos_ohci)
+ return -ENOMEM;
+
+ exynos_ohci->dev = &pdev->dev;
+
+ hcd = usb_create_hcd(&exynos_ohci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ dev_err(&pdev->dev, "Unable to create HCD\n");
+ err = -ENOMEM;
+ goto fail_hcd;
+ }
+
+ exynos_ohci->hcd = hcd;
+ exynos_ohci->clk = clk_get(&pdev->dev, "usbhost");
+
+ if (IS_ERR(exynos_ohci->clk)) {
+ dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+ err = PTR_ERR(exynos_ohci->clk);
+ goto fail_clk;
+ }
+
+ err = clk_enable(exynos_ohci->clk);
+ if (err)
+ goto fail_clken;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ err = -ENXIO;
+ goto fail_io;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = ioremap(res->start, resource_size(res));
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ err = -ENOMEM;
+ goto fail_io;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "Failed to get IRQ\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ if (pdata->phy_init)
+ pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+ ohci = hcd_to_ohci(hcd);
+ ohci_hcd_init(ohci);
+
+ err = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add USB HCD\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, exynos_ohci);
+
+ return 0;
+
+fail:
+ iounmap(hcd->regs);
+fail_io:
+ clk_disable(exynos_ohci->clk);
+fail_clken:
+ clk_put(exynos_ohci->clk);
+fail_clk:
+ usb_put_hcd(hcd);
+fail_hcd:
+ kfree(exynos_ohci);
+ return err;
+}
+
+static int __devexit exynos_ohci_remove(struct platform_device *pdev)
+{
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+ struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+
+ usb_remove_hcd(hcd);
+
+ if (pdata && pdata->phy_exit)
+ pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+
+ iounmap(hcd->regs);
+
+ clk_disable(exynos_ohci->clk);
+ clk_put(exynos_ohci->clk);
+
+ usb_put_hcd(hcd);
+ kfree(exynos_ohci);
+
+ return 0;
+}
+
+static void exynos_ohci_shutdown(struct platform_device *pdev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+#ifdef CONFIG_PM
+static int exynos_ohci_suspend(struct device *dev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+ unsigned long flags;
+ int rc = 0;
+
+ /*
+ * Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ *
+ * This is still racy as hcd->state is manipulated outside of
+ * any locks =P But that will be a different fix.
+ */
+ spin_lock_irqsave(&ohci->lock, flags);
+ if (hcd->state != HC_STATE_SUSPENDED && hcd->state != HC_STATE_HALT) {
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ if (pdata && pdata->phy_exit)
+ pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+fail:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return rc;
+}
+
+static int exynos_ohci_resume(struct device *dev)
+{
+ struct exynos_ohci_hcd *exynos_ohci = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = exynos_ohci->hcd;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
+
+ if (pdata && pdata->phy_init)
+ pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+ /* Mark hardware accessible again as we are out of D3 state by now */
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ ohci_finish_controller_resume(hcd);
+
+ return 0;
+}
+#else
+#define exynos_ohci_suspend NULL
+#define exynos_ohci_resume NULL
+#endif
+
+static const struct dev_pm_ops exynos_ohci_pm_ops = {
+ .suspend = exynos_ohci_suspend,
+ .resume = exynos_ohci_resume,
+};
+
+static struct platform_driver exynos_ohci_driver = {
+ .probe = exynos_ohci_probe,
+ .remove = __devexit_p(exynos_ohci_remove),
+ .shutdown = exynos_ohci_shutdown,
+ .driver = {
+ .name = "exynos-ohci",
+ .owner = THIS_MODULE,
+ .pm = &exynos_ohci_pm_ops,
+ }
+};
+
+MODULE_ALIAS("platform:exynos-ohci");
+MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index b263919..a1006ff 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1005,6 +1005,11 @@
#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
+#ifdef CONFIG_USB_OHCI_EXYNOS
+#include "ohci-exynos.c"
+#define PLATFORM_DRIVER exynos_ohci_driver
+#endif
+
#ifdef CONFIG_USB_OHCI_HCD_OMAP1
#include "ohci-omap.c"
#define OMAP1_PLATFORM_DRIVER ohci_hcd_omap_driver
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index 516ebc4..1b8133b 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -31,6 +31,7 @@
#include <linux/platform_device.h>
#include <plat/usb.h>
+#include <linux/pm_runtime.h>
/*-------------------------------------------------------------------------*/
@@ -134,7 +135,7 @@
int irq;
if (usb_disabled())
- goto err_end;
+ return -ENODEV;
if (!dev->parent) {
dev_err(dev, "Missing parent device\n");
@@ -172,11 +173,8 @@
hcd->rsrc_len = resource_size(res);
hcd->regs = regs;
- ret = omap_usbhs_enable(dev);
- if (ret) {
- dev_dbg(dev, "failed to start ohci\n");
- goto err_end;
- }
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -189,9 +187,7 @@
return 0;
err_add_hcd:
- omap_usbhs_disable(dev);
-
-err_end:
+ pm_runtime_put_sync(dev);
usb_put_hcd(hcd);
err_io:
@@ -220,9 +216,9 @@
iounmap(hcd->regs);
usb_remove_hcd(hcd);
- omap_usbhs_disable(dev);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
usb_put_hcd(hcd);
-
return 0;
}
diff --git a/drivers/usb/renesas_usbhs/mod.c b/drivers/usb/renesas_usbhs/mod.c
index 053f86d..ad96a38 100644
--- a/drivers/usb/renesas_usbhs/mod.c
+++ b/drivers/usb/renesas_usbhs/mod.c
@@ -349,7 +349,7 @@
if (mod->irq_attch)
intenb1 |= ATTCHE;
- if (mod->irq_attch)
+ if (mod->irq_dtch)
intenb1 |= DTCHE;
if (mod->irq_sign)
diff --git a/drivers/usb/renesas_usbhs/mod_host.c b/drivers/usb/renesas_usbhs/mod_host.c
index bade761..7955de5 100644
--- a/drivers/usb/renesas_usbhs/mod_host.c
+++ b/drivers/usb/renesas_usbhs/mod_host.c
@@ -1267,6 +1267,7 @@
dev_err(dev, "Failed to create hcd\n");
return -ENOMEM;
}
+ hcd->has_tt = 1; /* for low/full speed */
pipe_info = kzalloc(sizeof(*pipe_info) * pipe_size, GFP_KERNEL);
if (!pipe_info) {
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e342660..6dd6453 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -663,7 +663,12 @@
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x01) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x02) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x03) },
- { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x08) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x10) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x12) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x01, 0x13) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x01) }, /* E398 3G Modem */
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x02) }, /* E398 3G PC UI Interface */
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E353, 0xff, 0x02, 0x03) }, /* E398 3G Application Interface */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V740) },
diff --git a/drivers/xen/swiotlb-xen.c b/drivers/xen/swiotlb-xen.c
index 8e964b9..284798a 100644
--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -166,7 +166,7 @@
/*
* Get IO TLB memory from any location.
*/
- xen_io_tlb_start = alloc_bootmem(bytes);
+ xen_io_tlb_start = alloc_bootmem_pages(PAGE_ALIGN(bytes));
if (!xen_io_tlb_start) {
m = "Cannot allocate Xen-SWIOTLB buffer!\n";
goto error;
@@ -179,7 +179,7 @@
bytes,
xen_io_tlb_nslabs);
if (rc) {
- free_bootmem(__pa(xen_io_tlb_start), bytes);
+ free_bootmem(__pa(xen_io_tlb_start), PAGE_ALIGN(bytes));
m = "Failed to get contiguous memory for DMA from Xen!\n"\
"You either: don't have the permissions, do not have"\
" enough free memory under 4GB, or the hypervisor memory"\
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 7ec1409..cb97174 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -64,6 +64,8 @@
int idle;
};
+static int __btrfs_start_workers(struct btrfs_workers *workers);
+
/*
* btrfs_start_workers uses kthread_run, which can block waiting for memory
* for a very long time. It will actually throttle on page writeback,
@@ -88,27 +90,10 @@
{
struct worker_start *start;
start = container_of(work, struct worker_start, work);
- btrfs_start_workers(start->queue, 1);
+ __btrfs_start_workers(start->queue);
kfree(start);
}
-static int start_new_worker(struct btrfs_workers *queue)
-{
- struct worker_start *start;
- int ret;
-
- start = kzalloc(sizeof(*start), GFP_NOFS);
- if (!start)
- return -ENOMEM;
-
- start->work.func = start_new_worker_func;
- start->queue = queue;
- ret = btrfs_queue_worker(queue->atomic_worker_start, &start->work);
- if (ret)
- kfree(start);
- return ret;
-}
-
/*
* helper function to move a thread onto the idle list after it
* has finished some requests.
@@ -153,12 +138,20 @@
static void check_pending_worker_creates(struct btrfs_worker_thread *worker)
{
struct btrfs_workers *workers = worker->workers;
+ struct worker_start *start;
unsigned long flags;
rmb();
if (!workers->atomic_start_pending)
return;
+ start = kzalloc(sizeof(*start), GFP_NOFS);
+ if (!start)
+ return;
+
+ start->work.func = start_new_worker_func;
+ start->queue = workers;
+
spin_lock_irqsave(&workers->lock, flags);
if (!workers->atomic_start_pending)
goto out;
@@ -170,10 +163,11 @@
workers->num_workers_starting += 1;
spin_unlock_irqrestore(&workers->lock, flags);
- start_new_worker(workers);
+ btrfs_queue_worker(workers->atomic_worker_start, &start->work);
return;
out:
+ kfree(start);
spin_unlock_irqrestore(&workers->lock, flags);
}
@@ -331,7 +325,7 @@
run_ordered_completions(worker->workers, work);
check_pending_worker_creates(worker);
-
+ cond_resched();
}
spin_lock_irq(&worker->lock);
@@ -462,56 +456,55 @@
* starts new worker threads. This does not enforce the max worker
* count in case you need to temporarily go past it.
*/
-static int __btrfs_start_workers(struct btrfs_workers *workers,
- int num_workers)
+static int __btrfs_start_workers(struct btrfs_workers *workers)
{
struct btrfs_worker_thread *worker;
int ret = 0;
- int i;
- for (i = 0; i < num_workers; i++) {
- worker = kzalloc(sizeof(*worker), GFP_NOFS);
- if (!worker) {
- ret = -ENOMEM;
- goto fail;
- }
-
- INIT_LIST_HEAD(&worker->pending);
- INIT_LIST_HEAD(&worker->prio_pending);
- INIT_LIST_HEAD(&worker->worker_list);
- spin_lock_init(&worker->lock);
-
- atomic_set(&worker->num_pending, 0);
- atomic_set(&worker->refs, 1);
- worker->workers = workers;
- worker->task = kthread_run(worker_loop, worker,
- "btrfs-%s-%d", workers->name,
- workers->num_workers + i);
- if (IS_ERR(worker->task)) {
- ret = PTR_ERR(worker->task);
- kfree(worker);
- goto fail;
- }
- spin_lock_irq(&workers->lock);
- list_add_tail(&worker->worker_list, &workers->idle_list);
- worker->idle = 1;
- workers->num_workers++;
- workers->num_workers_starting--;
- WARN_ON(workers->num_workers_starting < 0);
- spin_unlock_irq(&workers->lock);
+ worker = kzalloc(sizeof(*worker), GFP_NOFS);
+ if (!worker) {
+ ret = -ENOMEM;
+ goto fail;
}
+
+ INIT_LIST_HEAD(&worker->pending);
+ INIT_LIST_HEAD(&worker->prio_pending);
+ INIT_LIST_HEAD(&worker->worker_list);
+ spin_lock_init(&worker->lock);
+
+ atomic_set(&worker->num_pending, 0);
+ atomic_set(&worker->refs, 1);
+ worker->workers = workers;
+ worker->task = kthread_run(worker_loop, worker,
+ "btrfs-%s-%d", workers->name,
+ workers->num_workers + 1);
+ if (IS_ERR(worker->task)) {
+ ret = PTR_ERR(worker->task);
+ kfree(worker);
+ goto fail;
+ }
+ spin_lock_irq(&workers->lock);
+ list_add_tail(&worker->worker_list, &workers->idle_list);
+ worker->idle = 1;
+ workers->num_workers++;
+ workers->num_workers_starting--;
+ WARN_ON(workers->num_workers_starting < 0);
+ spin_unlock_irq(&workers->lock);
+
return 0;
fail:
- btrfs_stop_workers(workers);
+ spin_lock_irq(&workers->lock);
+ workers->num_workers_starting--;
+ spin_unlock_irq(&workers->lock);
return ret;
}
-int btrfs_start_workers(struct btrfs_workers *workers, int num_workers)
+int btrfs_start_workers(struct btrfs_workers *workers)
{
spin_lock_irq(&workers->lock);
- workers->num_workers_starting += num_workers;
+ workers->num_workers_starting++;
spin_unlock_irq(&workers->lock);
- return __btrfs_start_workers(workers, num_workers);
+ return __btrfs_start_workers(workers);
}
/*
@@ -568,6 +561,7 @@
struct btrfs_worker_thread *worker;
unsigned long flags;
struct list_head *fallback;
+ int ret;
again:
spin_lock_irqsave(&workers->lock, flags);
@@ -584,7 +578,9 @@
workers->num_workers_starting++;
spin_unlock_irqrestore(&workers->lock, flags);
/* we're below the limit, start another worker */
- __btrfs_start_workers(workers, 1);
+ ret = __btrfs_start_workers(workers);
+ if (ret)
+ goto fallback;
goto again;
}
}
@@ -665,7 +661,7 @@
/*
* places a struct btrfs_work into the pending queue of one of the kthreads
*/
-int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work)
+void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work)
{
struct btrfs_worker_thread *worker;
unsigned long flags;
@@ -673,7 +669,7 @@
/* don't requeue something already on a list */
if (test_and_set_bit(WORK_QUEUED_BIT, &work->flags))
- goto out;
+ return;
worker = find_worker(workers);
if (workers->ordered) {
@@ -712,7 +708,4 @@
if (wake)
wake_up_process(worker->task);
spin_unlock_irqrestore(&worker->lock, flags);
-
-out:
- return 0;
}
diff --git a/fs/btrfs/async-thread.h b/fs/btrfs/async-thread.h
index 5077746..f34cc31 100644
--- a/fs/btrfs/async-thread.h
+++ b/fs/btrfs/async-thread.h
@@ -109,8 +109,8 @@
char *name;
};
-int btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work);
-int btrfs_start_workers(struct btrfs_workers *workers, int num_workers);
+void btrfs_queue_worker(struct btrfs_workers *workers, struct btrfs_work *work);
+int btrfs_start_workers(struct btrfs_workers *workers);
int btrfs_stop_workers(struct btrfs_workers *workers);
void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max,
struct btrfs_workers *async_starter);
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 50634abe..6738503 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -2692,7 +2692,8 @@
int btrfs_readpage(struct file *file, struct page *page);
void btrfs_evict_inode(struct inode *inode);
int btrfs_write_inode(struct inode *inode, struct writeback_control *wbc);
-void btrfs_dirty_inode(struct inode *inode, int flags);
+int btrfs_dirty_inode(struct inode *inode);
+int btrfs_update_time(struct file *file);
struct inode *btrfs_alloc_inode(struct super_block *sb);
void btrfs_destroy_inode(struct inode *inode);
int btrfs_drop_inode(struct inode *inode);
diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c
index 5b16357..9c1eccc 100644
--- a/fs/btrfs/delayed-inode.c
+++ b/fs/btrfs/delayed-inode.c
@@ -640,8 +640,8 @@
* Now if src_rsv == delalloc_block_rsv we'll let it just steal since
* we're accounted for.
*/
- if (!trans->bytes_reserved &&
- src_rsv != &root->fs_info->delalloc_block_rsv) {
+ if (!src_rsv || (!trans->bytes_reserved &&
+ src_rsv != &root->fs_info->delalloc_block_rsv)) {
ret = btrfs_block_rsv_add_noflush(root, dst_rsv, num_bytes);
/*
* Since we're under a transaction reserve_metadata_bytes could
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 632f8f3..f44b392 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -2194,19 +2194,27 @@
fs_info->endio_meta_write_workers.idle_thresh = 2;
fs_info->readahead_workers.idle_thresh = 2;
- btrfs_start_workers(&fs_info->workers, 1);
- btrfs_start_workers(&fs_info->generic_worker, 1);
- btrfs_start_workers(&fs_info->submit_workers, 1);
- btrfs_start_workers(&fs_info->delalloc_workers, 1);
- btrfs_start_workers(&fs_info->fixup_workers, 1);
- btrfs_start_workers(&fs_info->endio_workers, 1);
- btrfs_start_workers(&fs_info->endio_meta_workers, 1);
- btrfs_start_workers(&fs_info->endio_meta_write_workers, 1);
- btrfs_start_workers(&fs_info->endio_write_workers, 1);
- btrfs_start_workers(&fs_info->endio_freespace_worker, 1);
- btrfs_start_workers(&fs_info->delayed_workers, 1);
- btrfs_start_workers(&fs_info->caching_workers, 1);
- btrfs_start_workers(&fs_info->readahead_workers, 1);
+ /*
+ * btrfs_start_workers can really only fail because of ENOMEM so just
+ * return -ENOMEM if any of these fail.
+ */
+ ret = btrfs_start_workers(&fs_info->workers);
+ ret |= btrfs_start_workers(&fs_info->generic_worker);
+ ret |= btrfs_start_workers(&fs_info->submit_workers);
+ ret |= btrfs_start_workers(&fs_info->delalloc_workers);
+ ret |= btrfs_start_workers(&fs_info->fixup_workers);
+ ret |= btrfs_start_workers(&fs_info->endio_workers);
+ ret |= btrfs_start_workers(&fs_info->endio_meta_workers);
+ ret |= btrfs_start_workers(&fs_info->endio_meta_write_workers);
+ ret |= btrfs_start_workers(&fs_info->endio_write_workers);
+ ret |= btrfs_start_workers(&fs_info->endio_freespace_worker);
+ ret |= btrfs_start_workers(&fs_info->delayed_workers);
+ ret |= btrfs_start_workers(&fs_info->caching_workers);
+ ret |= btrfs_start_workers(&fs_info->readahead_workers);
+ if (ret) {
+ ret = -ENOMEM;
+ goto fail_sb_buffer;
+ }
fs_info->bdi.ra_pages *= btrfs_super_num_devices(disk_super);
fs_info->bdi.ra_pages = max(fs_info->bdi.ra_pages,
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 2ad8136..f5fbe57 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -2822,7 +2822,7 @@
btrfs_release_path(path);
out:
spin_lock(&block_group->lock);
- if (!ret)
+ if (!ret && dcs == BTRFS_DC_SETUP)
block_group->cache_generation = trans->transid;
block_group->disk_cache_state = dcs;
spin_unlock(&block_group->lock);
@@ -4204,12 +4204,17 @@
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_block_rsv *block_rsv = &root->fs_info->delalloc_block_rsv;
u64 to_reserve = 0;
+ u64 csum_bytes;
unsigned nr_extents = 0;
+ int extra_reserve = 0;
int flush = 1;
int ret;
+ /* Need to be holding the i_mutex here if we aren't free space cache */
if (btrfs_is_free_space_inode(root, inode))
flush = 0;
+ else
+ WARN_ON(!mutex_is_locked(&inode->i_mutex));
if (flush && btrfs_transaction_in_commit(root->fs_info))
schedule_timeout(1);
@@ -4220,11 +4225,9 @@
BTRFS_I(inode)->outstanding_extents++;
if (BTRFS_I(inode)->outstanding_extents >
- BTRFS_I(inode)->reserved_extents) {
+ BTRFS_I(inode)->reserved_extents)
nr_extents = BTRFS_I(inode)->outstanding_extents -
BTRFS_I(inode)->reserved_extents;
- BTRFS_I(inode)->reserved_extents += nr_extents;
- }
/*
* Add an item to reserve for updating the inode when we complete the
@@ -4232,11 +4235,12 @@
*/
if (!BTRFS_I(inode)->delalloc_meta_reserved) {
nr_extents++;
- BTRFS_I(inode)->delalloc_meta_reserved = 1;
+ extra_reserve = 1;
}
to_reserve = btrfs_calc_trans_metadata_size(root, nr_extents);
to_reserve += calc_csum_metadata_size(inode, num_bytes, 1);
+ csum_bytes = BTRFS_I(inode)->csum_bytes;
spin_unlock(&BTRFS_I(inode)->lock);
ret = reserve_metadata_bytes(root, block_rsv, to_reserve, flush);
@@ -4246,22 +4250,35 @@
spin_lock(&BTRFS_I(inode)->lock);
dropped = drop_outstanding_extent(inode);
- to_free = calc_csum_metadata_size(inode, num_bytes, 0);
- spin_unlock(&BTRFS_I(inode)->lock);
- to_free += btrfs_calc_trans_metadata_size(root, dropped);
-
/*
- * Somebody could have come in and twiddled with the
- * reservation, so if we have to free more than we would have
- * reserved from this reservation go ahead and release those
- * bytes.
+ * If the inodes csum_bytes is the same as the original
+ * csum_bytes then we know we haven't raced with any free()ers
+ * so we can just reduce our inodes csum bytes and carry on.
+ * Otherwise we have to do the normal free thing to account for
+ * the case that the free side didn't free up its reserve
+ * because of this outstanding reservation.
*/
- to_free -= to_reserve;
+ if (BTRFS_I(inode)->csum_bytes == csum_bytes)
+ calc_csum_metadata_size(inode, num_bytes, 0);
+ else
+ to_free = calc_csum_metadata_size(inode, num_bytes, 0);
+ spin_unlock(&BTRFS_I(inode)->lock);
+ if (dropped)
+ to_free += btrfs_calc_trans_metadata_size(root, dropped);
+
if (to_free)
btrfs_block_rsv_release(root, block_rsv, to_free);
return ret;
}
+ spin_lock(&BTRFS_I(inode)->lock);
+ if (extra_reserve) {
+ BTRFS_I(inode)->delalloc_meta_reserved = 1;
+ nr_extents--;
+ }
+ BTRFS_I(inode)->reserved_extents += nr_extents;
+ spin_unlock(&BTRFS_I(inode)->lock);
+
block_rsv_add_bytes(block_rsv, to_reserve, 1);
return 0;
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index dafdfa0..97fbe93 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1167,6 +1167,8 @@
nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
(sizeof(struct page *)));
+ nrptrs = min(nrptrs, current->nr_dirtied_pause - current->nr_dirtied);
+ nrptrs = max(nrptrs, 8);
pages = kmalloc(nrptrs * sizeof(struct page *), GFP_KERNEL);
if (!pages)
return -ENOMEM;
@@ -1387,7 +1389,11 @@
goto out;
}
- file_update_time(file);
+ err = btrfs_update_time(file);
+ if (err) {
+ mutex_unlock(&inode->i_mutex);
+ goto out;
+ }
BTRFS_I(inode)->sequence++;
start_pos = round_down(pos, root->sectorsize);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 2c984f7..0a6b928 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -38,6 +38,7 @@
#include <linux/falloc.h>
#include <linux/slab.h>
#include <linux/ratelimit.h>
+#include <linux/mount.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
@@ -2031,7 +2032,7 @@
/* insert an orphan item to track this unlinked/truncated file */
if (insert >= 1) {
ret = btrfs_insert_orphan_item(trans, root, btrfs_ino(inode));
- BUG_ON(ret);
+ BUG_ON(ret && ret != -EEXIST);
}
/* insert an orphan item to track subvolume contains orphan files */
@@ -2158,6 +2159,38 @@
if (ret && ret != -ESTALE)
goto out;
+ if (ret == -ESTALE && root == root->fs_info->tree_root) {
+ struct btrfs_root *dead_root;
+ struct btrfs_fs_info *fs_info = root->fs_info;
+ int is_dead_root = 0;
+
+ /*
+ * this is an orphan in the tree root. Currently these
+ * could come from 2 sources:
+ * a) a snapshot deletion in progress
+ * b) a free space cache inode
+ * We need to distinguish those two, as the snapshot
+ * orphan must not get deleted.
+ * find_dead_roots already ran before us, so if this
+ * is a snapshot deletion, we should find the root
+ * in the dead_roots list
+ */
+ spin_lock(&fs_info->trans_lock);
+ list_for_each_entry(dead_root, &fs_info->dead_roots,
+ root_list) {
+ if (dead_root->root_key.objectid ==
+ found_key.objectid) {
+ is_dead_root = 1;
+ break;
+ }
+ }
+ spin_unlock(&fs_info->trans_lock);
+ if (is_dead_root) {
+ /* prevent this orphan from being found again */
+ key.offset = found_key.objectid - 1;
+ continue;
+ }
+ }
/*
* Inode is already gone but the orphan item is still there,
* kill the orphan item.
@@ -2191,7 +2224,14 @@
continue;
}
nr_truncate++;
+ /*
+ * Need to hold the imutex for reservation purposes, not
+ * a huge deal here but I have a WARN_ON in
+ * btrfs_delalloc_reserve_space to catch offenders.
+ */
+ mutex_lock(&inode->i_mutex);
ret = btrfs_truncate(inode);
+ mutex_unlock(&inode->i_mutex);
} else {
nr_unlink++;
}
@@ -3327,7 +3367,7 @@
u64 hint_byte = 0;
hole_size = last_byte - cur_offset;
- trans = btrfs_start_transaction(root, 2);
+ trans = btrfs_start_transaction(root, 3);
if (IS_ERR(trans)) {
err = PTR_ERR(trans);
break;
@@ -3337,6 +3377,7 @@
cur_offset + hole_size,
&hint_byte, 1);
if (err) {
+ btrfs_update_inode(trans, root, inode);
btrfs_end_transaction(trans, root);
break;
}
@@ -3346,6 +3387,7 @@
0, hole_size, 0, hole_size,
0, 0, 0);
if (err) {
+ btrfs_update_inode(trans, root, inode);
btrfs_end_transaction(trans, root);
break;
}
@@ -3353,6 +3395,7 @@
btrfs_drop_extent_cache(inode, hole_start,
last_byte - 1, 0);
+ btrfs_update_inode(trans, root, inode);
btrfs_end_transaction(trans, root);
}
free_extent_map(em);
@@ -3370,6 +3413,8 @@
static int btrfs_setsize(struct inode *inode, loff_t newsize)
{
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_trans_handle *trans;
loff_t oldsize = i_size_read(inode);
int ret;
@@ -3377,16 +3422,19 @@
return 0;
if (newsize > oldsize) {
- i_size_write(inode, newsize);
- btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL);
truncate_pagecache(inode, oldsize, newsize);
ret = btrfs_cont_expand(inode, oldsize, newsize);
- if (ret) {
- btrfs_setsize(inode, oldsize);
+ if (ret)
return ret;
- }
- mark_inode_dirty(inode);
+ trans = btrfs_start_transaction(root, 1);
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
+
+ i_size_write(inode, newsize);
+ btrfs_ordered_update_i_size(inode, i_size_read(inode), NULL);
+ ret = btrfs_update_inode(trans, root, inode);
+ btrfs_end_transaction_throttle(trans, root);
} else {
/*
@@ -3426,9 +3474,9 @@
if (attr->ia_valid) {
setattr_copy(inode, attr);
- mark_inode_dirty(inode);
+ err = btrfs_dirty_inode(inode);
- if (attr->ia_valid & ATTR_MODE)
+ if (!err && attr->ia_valid & ATTR_MODE)
err = btrfs_acl_chmod(inode);
}
@@ -4204,42 +4252,80 @@
* FIXME, needs more benchmarking...there are no reasons other than performance
* to keep or drop this code.
*/
-void btrfs_dirty_inode(struct inode *inode, int flags)
+int btrfs_dirty_inode(struct inode *inode)
{
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_trans_handle *trans;
int ret;
if (BTRFS_I(inode)->dummy_inode)
- return;
+ return 0;
trans = btrfs_join_transaction(root);
- BUG_ON(IS_ERR(trans));
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
ret = btrfs_update_inode(trans, root, inode);
if (ret && ret == -ENOSPC) {
/* whoops, lets try again with the full transaction */
btrfs_end_transaction(trans, root);
trans = btrfs_start_transaction(root, 1);
- if (IS_ERR(trans)) {
- printk_ratelimited(KERN_ERR "btrfs: fail to "
- "dirty inode %llu error %ld\n",
- (unsigned long long)btrfs_ino(inode),
- PTR_ERR(trans));
- return;
- }
+ if (IS_ERR(trans))
+ return PTR_ERR(trans);
ret = btrfs_update_inode(trans, root, inode);
- if (ret) {
- printk_ratelimited(KERN_ERR "btrfs: fail to "
- "dirty inode %llu error %d\n",
- (unsigned long long)btrfs_ino(inode),
- ret);
- }
}
btrfs_end_transaction(trans, root);
if (BTRFS_I(inode)->delayed_node)
btrfs_balance_delayed_items(root);
+
+ return ret;
+}
+
+/*
+ * This is a copy of file_update_time. We need this so we can return error on
+ * ENOSPC for updating the inode in the case of file write and mmap writes.
+ */
+int btrfs_update_time(struct file *file)
+{
+ struct inode *inode = file->f_path.dentry->d_inode;
+ struct timespec now;
+ int ret;
+ enum { S_MTIME = 1, S_CTIME = 2, S_VERSION = 4 } sync_it = 0;
+
+ /* First try to exhaust all avenues to not sync */
+ if (IS_NOCMTIME(inode))
+ return 0;
+
+ now = current_fs_time(inode->i_sb);
+ if (!timespec_equal(&inode->i_mtime, &now))
+ sync_it = S_MTIME;
+
+ if (!timespec_equal(&inode->i_ctime, &now))
+ sync_it |= S_CTIME;
+
+ if (IS_I_VERSION(inode))
+ sync_it |= S_VERSION;
+
+ if (!sync_it)
+ return 0;
+
+ /* Finally allowed to write? Takes lock. */
+ if (mnt_want_write_file(file))
+ return 0;
+
+ /* Only change inode inside the lock region */
+ if (sync_it & S_VERSION)
+ inode_inc_iversion(inode);
+ if (sync_it & S_CTIME)
+ inode->i_ctime = now;
+ if (sync_it & S_MTIME)
+ inode->i_mtime = now;
+ ret = btrfs_dirty_inode(inode);
+ if (!ret)
+ mark_inode_dirty_sync(inode);
+ mnt_drop_write(file->f_path.mnt);
+ return ret;
}
/*
@@ -4555,11 +4641,18 @@
goto out_unlock;
}
+ /*
+ * If the active LSM wants to access the inode during
+ * d_instantiate it needs these. Smack checks to see
+ * if the filesystem supports xattrs by looking at the
+ * ops vector.
+ */
+
+ inode->i_op = &btrfs_special_inode_operations;
err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
- inode->i_op = &btrfs_special_inode_operations;
init_special_inode(inode, inode->i_mode, rdev);
btrfs_update_inode(trans, root, inode);
}
@@ -4613,14 +4706,21 @@
goto out_unlock;
}
+ /*
+ * If the active LSM wants to access the inode during
+ * d_instantiate it needs these. Smack checks to see
+ * if the filesystem supports xattrs by looking at the
+ * ops vector.
+ */
+ inode->i_fop = &btrfs_file_operations;
+ inode->i_op = &btrfs_file_inode_operations;
+
err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
inode->i_mapping->a_ops = &btrfs_aops;
inode->i_mapping->backing_dev_info = &root->fs_info->bdi;
- inode->i_fop = &btrfs_file_operations;
- inode->i_op = &btrfs_file_inode_operations;
BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
}
out_unlock:
@@ -6303,7 +6403,12 @@
u64 page_start;
u64 page_end;
+ /* Need this to keep space reservations serialized */
+ mutex_lock(&inode->i_mutex);
ret = btrfs_delalloc_reserve_space(inode, PAGE_CACHE_SIZE);
+ mutex_unlock(&inode->i_mutex);
+ if (!ret)
+ ret = btrfs_update_time(vma->vm_file);
if (ret) {
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
@@ -6515,8 +6620,9 @@
/* Just need the 1 for updating the inode */
trans = btrfs_start_transaction(root, 1);
if (IS_ERR(trans)) {
- err = PTR_ERR(trans);
- goto out;
+ ret = err = PTR_ERR(trans);
+ trans = NULL;
+ break;
}
}
@@ -7076,14 +7182,21 @@
goto out_unlock;
}
+ /*
+ * If the active LSM wants to access the inode during
+ * d_instantiate it needs these. Smack checks to see
+ * if the filesystem supports xattrs by looking at the
+ * ops vector.
+ */
+ inode->i_fop = &btrfs_file_operations;
+ inode->i_op = &btrfs_file_inode_operations;
+
err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
inode->i_mapping->a_ops = &btrfs_aops;
inode->i_mapping->backing_dev_info = &root->fs_info->bdi;
- inode->i_fop = &btrfs_file_operations;
- inode->i_op = &btrfs_file_inode_operations;
BTRFS_I(inode)->io_tree.ops = &btrfs_extent_io_ops;
}
if (drop_inode)
@@ -7353,6 +7466,7 @@
.follow_link = page_follow_link_light,
.put_link = page_put_link,
.getattr = btrfs_getattr,
+ .setattr = btrfs_setattr,
.permission = btrfs_permission,
.setxattr = btrfs_setxattr,
.getxattr = btrfs_getxattr,
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 72d4616..c04f02c 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -252,11 +252,11 @@
trans = btrfs_join_transaction(root);
BUG_ON(IS_ERR(trans));
+ btrfs_update_iflags(inode);
+ inode->i_ctime = CURRENT_TIME;
ret = btrfs_update_inode(trans, root, inode);
BUG_ON(ret);
- btrfs_update_iflags(inode);
- inode->i_ctime = CURRENT_TIME;
btrfs_end_transaction(trans, root);
mnt_drop_write(file->f_path.mnt);
@@ -858,8 +858,10 @@
return 0;
file_end = (isize - 1) >> PAGE_CACHE_SHIFT;
+ mutex_lock(&inode->i_mutex);
ret = btrfs_delalloc_reserve_space(inode,
num_pages << PAGE_CACHE_SHIFT);
+ mutex_unlock(&inode->i_mutex);
if (ret)
return ret;
again:
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index dff29d5..cfb5543 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -2947,7 +2947,9 @@
index = (cluster->start - offset) >> PAGE_CACHE_SHIFT;
last_index = (cluster->end - offset) >> PAGE_CACHE_SHIFT;
while (index <= last_index) {
+ mutex_lock(&inode->i_mutex);
ret = btrfs_delalloc_reserve_metadata(inode, PAGE_CACHE_SIZE);
+ mutex_unlock(&inode->i_mutex);
if (ret)
goto out;
diff --git a/fs/btrfs/scrub.c b/fs/btrfs/scrub.c
index c27bcb6..ddf2c90 100644
--- a/fs/btrfs/scrub.c
+++ b/fs/btrfs/scrub.c
@@ -1535,18 +1535,22 @@
static noinline_for_stack int scrub_workers_get(struct btrfs_root *root)
{
struct btrfs_fs_info *fs_info = root->fs_info;
+ int ret = 0;
mutex_lock(&fs_info->scrub_lock);
if (fs_info->scrub_workers_refcnt == 0) {
btrfs_init_workers(&fs_info->scrub_workers, "scrub",
fs_info->thread_pool_size, &fs_info->generic_worker);
fs_info->scrub_workers.idle_thresh = 4;
- btrfs_start_workers(&fs_info->scrub_workers, 1);
+ ret = btrfs_start_workers(&fs_info->scrub_workers);
+ if (ret)
+ goto out;
}
++fs_info->scrub_workers_refcnt;
+out:
mutex_unlock(&fs_info->scrub_lock);
- return 0;
+ return ret;
}
static noinline_for_stack void scrub_workers_put(struct btrfs_root *root)
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index e28ad4b..200f63b 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -41,6 +41,7 @@
#include <linux/slab.h>
#include <linux/cleancache.h>
#include <linux/mnt_namespace.h>
+#include <linux/ratelimit.h>
#include "compat.h"
#include "delayed-inode.h"
#include "ctree.h"
@@ -1053,7 +1054,7 @@
u64 avail_space;
u64 used_space;
u64 min_stripe_size;
- int min_stripes = 1;
+ int min_stripes = 1, num_stripes = 1;
int i = 0, nr_devices;
int ret;
@@ -1067,12 +1068,16 @@
/* calc min stripe number for data space alloction */
type = btrfs_get_alloc_profile(root, 1);
- if (type & BTRFS_BLOCK_GROUP_RAID0)
+ if (type & BTRFS_BLOCK_GROUP_RAID0) {
min_stripes = 2;
- else if (type & BTRFS_BLOCK_GROUP_RAID1)
+ num_stripes = nr_devices;
+ } else if (type & BTRFS_BLOCK_GROUP_RAID1) {
min_stripes = 2;
- else if (type & BTRFS_BLOCK_GROUP_RAID10)
+ num_stripes = 2;
+ } else if (type & BTRFS_BLOCK_GROUP_RAID10) {
min_stripes = 4;
+ num_stripes = 4;
+ }
if (type & BTRFS_BLOCK_GROUP_DUP)
min_stripe_size = 2 * BTRFS_STRIPE_LEN;
@@ -1141,13 +1146,16 @@
i = nr_devices - 1;
avail_space = 0;
while (nr_devices >= min_stripes) {
+ if (num_stripes > nr_devices)
+ num_stripes = nr_devices;
+
if (devices_info[i].max_avail >= min_stripe_size) {
int j;
u64 alloc_size;
- avail_space += devices_info[i].max_avail * min_stripes;
+ avail_space += devices_info[i].max_avail * num_stripes;
alloc_size = devices_info[i].max_avail;
- for (j = i + 1 - min_stripes; j <= i; j++)
+ for (j = i + 1 - num_stripes; j <= i; j++)
devices_info[j].max_avail -= alloc_size;
}
i--;
@@ -1264,6 +1272,16 @@
return 0;
}
+static void btrfs_fs_dirty_inode(struct inode *inode, int flags)
+{
+ int ret;
+
+ ret = btrfs_dirty_inode(inode);
+ if (ret)
+ printk_ratelimited(KERN_ERR "btrfs: fail to dirty inode %Lu "
+ "error %d\n", btrfs_ino(inode), ret);
+}
+
static const struct super_operations btrfs_super_ops = {
.drop_inode = btrfs_drop_inode,
.evict_inode = btrfs_evict_inode,
@@ -1271,7 +1289,7 @@
.sync_fs = btrfs_sync_fs,
.show_options = btrfs_show_options,
.write_inode = btrfs_write_inode,
- .dirty_inode = btrfs_dirty_inode,
+ .dirty_inode = btrfs_fs_dirty_inode,
.alloc_inode = btrfs_alloc_inode,
.destroy_inode = btrfs_destroy_inode,
.statfs = btrfs_statfs,
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 0a8c8f8..f4b839f 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -295,6 +295,12 @@
btrfs_requeue_work(&device->work);
goto done;
}
+ /* unplug every 64 requests just for good measure */
+ if (batch_run % 64 == 0) {
+ blk_finish_plug(&plug);
+ blk_start_plug(&plug);
+ sync_pending = 0;
+ }
}
cond_resched();
@@ -3258,7 +3264,7 @@
*/
if (atomic_read(&bbio->error) > bbio->max_errors) {
err = -EIO;
- } else if (err) {
+ } else {
/*
* this bio is actually up to date, we didn't
* go over the max number of errors
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 4144caf..173b1d2 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -87,7 +87,7 @@
snapc = ceph_get_snap_context(ci->i_snap_realm->cached_context);
/* dirty the head */
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_head_snapc == NULL)
ci->i_head_snapc = ceph_get_snap_context(snapc);
++ci->i_wrbuffer_ref_head;
@@ -100,7 +100,7 @@
ci->i_wrbuffer_ref-1, ci->i_wrbuffer_ref_head-1,
ci->i_wrbuffer_ref, ci->i_wrbuffer_ref_head,
snapc, snapc->seq, snapc->num_snaps);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
/* now adjust page */
spin_lock_irq(&mapping->tree_lock);
@@ -391,7 +391,7 @@
struct ceph_snap_context *snapc = NULL;
struct ceph_cap_snap *capsnap = NULL;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
dout(" cap_snap %p snapc %p has %d dirty pages\n", capsnap,
capsnap->context, capsnap->dirty_pages);
@@ -407,7 +407,7 @@
dout(" head snapc %p has %d dirty pages\n",
snapc, ci->i_wrbuffer_ref_head);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return snapc;
}
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 0f327c6..8b53193 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -309,7 +309,7 @@
/*
* Find ceph_cap for given mds, if any.
*
- * Called with i_lock held.
+ * Called with i_ceph_lock held.
*/
static struct ceph_cap *__get_cap_for_mds(struct ceph_inode_info *ci, int mds)
{
@@ -332,9 +332,9 @@
{
struct ceph_cap *cap;
- spin_lock(&ci->vfs_inode.i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = __get_cap_for_mds(ci, mds);
- spin_unlock(&ci->vfs_inode.i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return cap;
}
@@ -361,15 +361,16 @@
int ceph_get_cap_mds(struct inode *inode)
{
+ struct ceph_inode_info *ci = ceph_inode(inode);
int mds;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
mds = __ceph_get_cap_mds(ceph_inode(inode));
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return mds;
}
/*
- * Called under i_lock.
+ * Called under i_ceph_lock.
*/
static void __insert_cap_node(struct ceph_inode_info *ci,
struct ceph_cap *new)
@@ -415,7 +416,7 @@
*
* If I_FLUSH is set, leave the inode at the front of the list.
*
- * Caller holds i_lock
+ * Caller holds i_ceph_lock
* -> we take mdsc->cap_delay_lock
*/
static void __cap_delay_requeue(struct ceph_mds_client *mdsc,
@@ -457,7 +458,7 @@
/*
* Cancel delayed work on cap.
*
- * Caller must hold i_lock.
+ * Caller must hold i_ceph_lock.
*/
static void __cap_delay_cancel(struct ceph_mds_client *mdsc,
struct ceph_inode_info *ci)
@@ -532,14 +533,14 @@
wanted |= ceph_caps_for_mode(fmode);
retry:
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = __get_cap_for_mds(ci, mds);
if (!cap) {
if (new_cap) {
cap = new_cap;
new_cap = NULL;
} else {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
new_cap = get_cap(mdsc, caps_reservation);
if (new_cap == NULL)
return -ENOMEM;
@@ -625,7 +626,7 @@
if (fmode >= 0)
__ceph_get_fmode(ci, fmode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
wake_up_all(&ci->i_cap_wq);
return 0;
}
@@ -792,7 +793,7 @@
struct rb_node *p;
int ret = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
cap = rb_entry(p, struct ceph_cap, ci_node);
if (__cap_is_valid(cap) &&
@@ -801,7 +802,7 @@
break;
}
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("ceph_caps_revoking %p %s = %d\n", inode,
ceph_cap_string(mask), ret);
return ret;
@@ -855,7 +856,7 @@
}
/*
- * called under i_lock
+ * called under i_ceph_lock
*/
static int __ceph_is_any_caps(struct ceph_inode_info *ci)
{
@@ -865,7 +866,7 @@
/*
* Remove a cap. Take steps to deal with a racing iterate_session_caps.
*
- * caller should hold i_lock.
+ * caller should hold i_ceph_lock.
* caller will not hold session s_mutex if called from destroy_inode.
*/
void __ceph_remove_cap(struct ceph_cap *cap)
@@ -1028,7 +1029,7 @@
/*
* Queue cap releases when an inode is dropped from our cache. Since
- * inode is about to be destroyed, there is no need for i_lock.
+ * inode is about to be destroyed, there is no need for i_ceph_lock.
*/
void ceph_queue_caps_release(struct inode *inode)
{
@@ -1049,7 +1050,7 @@
/*
* Send a cap msg on the given inode. Update our caps state, then
- * drop i_lock and send the message.
+ * drop i_ceph_lock and send the message.
*
* Make note of max_size reported/requested from mds, revoked caps
* that have now been implemented.
@@ -1061,13 +1062,13 @@
* Return non-zero if delayed release, or we experienced an error
* such that the caller should requeue + retry later.
*
- * called with i_lock, then drops it.
+ * called with i_ceph_lock, then drops it.
* caller should hold snap_rwsem (read), s_mutex.
*/
static int __send_cap(struct ceph_mds_client *mdsc, struct ceph_cap *cap,
int op, int used, int want, int retain, int flushing,
unsigned *pflush_tid)
- __releases(cap->ci->vfs_inode->i_lock)
+ __releases(cap->ci->i_ceph_lock)
{
struct ceph_inode_info *ci = cap->ci;
struct inode *inode = &ci->vfs_inode;
@@ -1170,7 +1171,7 @@
xattr_version = ci->i_xattrs.version;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
ret = send_cap_msg(session, ceph_vino(inode).ino, cap_id,
op, keep, want, flushing, seq, flush_tid, issue_seq, mseq,
@@ -1198,13 +1199,13 @@
* Unless @again is true, skip cap_snaps that were already sent to
* the MDS (i.e., during this session).
*
- * Called under i_lock. Takes s_mutex as needed.
+ * Called under i_ceph_lock. Takes s_mutex as needed.
*/
void __ceph_flush_snaps(struct ceph_inode_info *ci,
struct ceph_mds_session **psession,
int again)
- __releases(ci->vfs_inode->i_lock)
- __acquires(ci->vfs_inode->i_lock)
+ __releases(ci->i_ceph_lock)
+ __acquires(ci->i_ceph_lock)
{
struct inode *inode = &ci->vfs_inode;
int mds;
@@ -1261,7 +1262,7 @@
session = NULL;
}
if (!session) {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
mutex_lock(&mdsc->mutex);
session = __ceph_lookup_mds_session(mdsc, mds);
mutex_unlock(&mdsc->mutex);
@@ -1275,7 +1276,7 @@
* deletion or migration. retry, and we'll
* get a better @mds value next time.
*/
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
goto retry;
}
@@ -1285,7 +1286,7 @@
list_del_init(&capsnap->flushing_item);
list_add_tail(&capsnap->flushing_item,
&session->s_cap_snaps_flushing);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("flush_snaps %p cap_snap %p follows %lld tid %llu\n",
inode, capsnap, capsnap->follows, capsnap->flush_tid);
@@ -1302,7 +1303,7 @@
next_follows = capsnap->follows + 1;
ceph_put_cap_snap(capsnap);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
goto retry;
}
@@ -1322,11 +1323,9 @@
static void ceph_flush_snaps(struct ceph_inode_info *ci)
{
- struct inode *inode = &ci->vfs_inode;
-
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__ceph_flush_snaps(ci, NULL, 0);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
/*
@@ -1373,7 +1372,7 @@
* Add dirty inode to the flushing list. Assigned a seq number so we
* can wait for caps to flush without starving.
*
- * Called under i_lock.
+ * Called under i_ceph_lock.
*/
static int __mark_caps_flushing(struct inode *inode,
struct ceph_mds_session *session)
@@ -1421,9 +1420,9 @@
struct ceph_inode_info *ci = ceph_inode(inode);
u32 invalidating_gen = ci->i_rdcache_gen;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
invalidate_mapping_pages(&inode->i_data, 0, -1);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (inode->i_data.nrpages == 0 &&
invalidating_gen == ci->i_rdcache_gen) {
@@ -1470,7 +1469,7 @@
if (mdsc->stopping)
is_delayed = 1;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_ceph_flags & CEPH_I_FLUSH)
flags |= CHECK_CAPS_FLUSH;
@@ -1480,7 +1479,7 @@
__ceph_flush_snaps(ci, &session, 0);
goto retry_locked;
retry:
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
retry_locked:
file_wanted = __ceph_caps_file_wanted(ci);
used = __ceph_caps_used(ci);
@@ -1634,7 +1633,7 @@
if (mutex_trylock(&session->s_mutex) == 0) {
dout("inverting session/ino locks on %p\n",
session);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (took_snap_rwsem) {
up_read(&mdsc->snap_rwsem);
took_snap_rwsem = 0;
@@ -1648,7 +1647,7 @@
if (down_read_trylock(&mdsc->snap_rwsem) == 0) {
dout("inverting snap/in locks on %p\n",
inode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
down_read(&mdsc->snap_rwsem);
took_snap_rwsem = 1;
goto retry;
@@ -1664,10 +1663,10 @@
mds = cap->mds; /* remember mds, so we don't repeat */
sent++;
- /* __send_cap drops i_lock */
+ /* __send_cap drops i_ceph_lock */
delayed += __send_cap(mdsc, cap, CEPH_CAP_OP_UPDATE, used, want,
retain, flushing, NULL);
- goto retry; /* retake i_lock and restart our cap scan. */
+ goto retry; /* retake i_ceph_lock and restart our cap scan. */
}
/*
@@ -1681,7 +1680,7 @@
else if (!is_delayed || force_requeue)
__cap_delay_requeue(mdsc, ci);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (queue_invalidate)
ceph_queue_invalidate(inode);
@@ -1704,7 +1703,7 @@
int flushing = 0;
retry:
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_ceph_flags & CEPH_I_NOFLUSH) {
dout("try_flush_caps skipping %p I_NOFLUSH set\n", inode);
goto out;
@@ -1716,7 +1715,7 @@
int delayed;
if (!session) {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
session = cap->session;
mutex_lock(&session->s_mutex);
goto retry;
@@ -1727,18 +1726,18 @@
flushing = __mark_caps_flushing(inode, session);
- /* __send_cap drops i_lock */
+ /* __send_cap drops i_ceph_lock */
delayed = __send_cap(mdsc, cap, CEPH_CAP_OP_FLUSH, used, want,
cap->issued | cap->implemented, flushing,
flush_tid);
if (!delayed)
goto out_unlocked;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__cap_delay_requeue(mdsc, ci);
}
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
out_unlocked:
if (session && unlock_session)
mutex_unlock(&session->s_mutex);
@@ -1753,7 +1752,7 @@
struct ceph_inode_info *ci = ceph_inode(inode);
int i, ret = 1;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
for (i = 0; i < CEPH_CAP_BITS; i++)
if ((ci->i_flushing_caps & (1 << i)) &&
ci->i_cap_flush_tid[i] <= tid) {
@@ -1761,7 +1760,7 @@
ret = 0;
break;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return ret;
}
@@ -1868,10 +1867,10 @@
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (__ceph_caps_dirty(ci))
__cap_delay_requeue_front(mdsc, ci);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
return err;
}
@@ -1894,7 +1893,7 @@
struct inode *inode = &ci->vfs_inode;
struct ceph_cap *cap;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = ci->i_auth_cap;
if (cap && cap->session == session) {
dout("kick_flushing_caps %p cap %p capsnap %p\n", inode,
@@ -1904,7 +1903,7 @@
pr_err("%p auth cap %p not mds%d ???\n", inode,
cap, session->s_mds);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
}
@@ -1921,7 +1920,7 @@
struct ceph_cap *cap;
int delayed = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = ci->i_auth_cap;
if (cap && cap->session == session) {
dout("kick_flushing_caps %p cap %p %s\n", inode,
@@ -1932,14 +1931,14 @@
cap->issued | cap->implemented,
ci->i_flushing_caps, NULL);
if (delayed) {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__cap_delay_requeue(mdsc, ci);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
} else {
pr_err("%p auth cap %p not mds%d ???\n", inode,
cap, session->s_mds);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
}
}
@@ -1952,7 +1951,7 @@
struct ceph_cap *cap;
int delayed = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = ci->i_auth_cap;
dout("kick_flushing_inode_caps %p flushing %s flush_seq %lld\n", inode,
ceph_cap_string(ci->i_flushing_caps), ci->i_cap_flush_seq);
@@ -1964,12 +1963,12 @@
cap->issued | cap->implemented,
ci->i_flushing_caps, NULL);
if (delayed) {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__cap_delay_requeue(mdsc, ci);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
} else {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
}
@@ -1978,7 +1977,7 @@
* Take references to capabilities we hold, so that we don't release
* them to the MDS prematurely.
*
- * Protected by i_lock.
+ * Protected by i_ceph_lock.
*/
static void __take_cap_refs(struct ceph_inode_info *ci, int got)
{
@@ -2016,7 +2015,7 @@
dout("get_cap_refs %p need %s want %s\n", inode,
ceph_cap_string(need), ceph_cap_string(want));
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
/* make sure file is actually open */
file_wanted = __ceph_caps_file_wanted(ci);
@@ -2077,7 +2076,7 @@
ceph_cap_string(have), ceph_cap_string(need));
}
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("get_cap_refs %p ret %d got %s\n", inode,
ret, ceph_cap_string(*got));
return ret;
@@ -2094,7 +2093,7 @@
int check = 0;
/* do we need to explicitly request a larger max_size? */
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if ((endoff >= ci->i_max_size ||
endoff > (inode->i_size << 1)) &&
endoff > ci->i_wanted_max_size) {
@@ -2103,7 +2102,7 @@
ci->i_wanted_max_size = endoff;
check = 1;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (check)
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
}
@@ -2140,9 +2139,9 @@
*/
void ceph_get_cap_refs(struct ceph_inode_info *ci, int caps)
{
- spin_lock(&ci->vfs_inode.i_lock);
+ spin_lock(&ci->i_ceph_lock);
__take_cap_refs(ci, caps);
- spin_unlock(&ci->vfs_inode.i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
/*
@@ -2160,7 +2159,7 @@
int last = 0, put = 0, flushsnaps = 0, wake = 0;
struct ceph_cap_snap *capsnap;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (had & CEPH_CAP_PIN)
--ci->i_pin_ref;
if (had & CEPH_CAP_FILE_RD)
@@ -2193,7 +2192,7 @@
}
}
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("put_cap_refs %p had %s%s%s\n", inode, ceph_cap_string(had),
last ? " last" : "", put ? " put" : "");
@@ -2225,7 +2224,7 @@
int found = 0;
struct ceph_cap_snap *capsnap = NULL;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_wrbuffer_ref -= nr;
last = !ci->i_wrbuffer_ref;
@@ -2274,7 +2273,7 @@
}
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (last) {
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
@@ -2291,7 +2290,7 @@
* Handle a cap GRANT message from the MDS. (Note that a GRANT may
* actually be a revocation if it specifies a smaller cap set.)
*
- * caller holds s_mutex and i_lock, we drop both.
+ * caller holds s_mutex and i_ceph_lock, we drop both.
*
* return value:
* 0 - ok
@@ -2302,7 +2301,7 @@
struct ceph_mds_session *session,
struct ceph_cap *cap,
struct ceph_buffer *xattr_buf)
- __releases(inode->i_lock)
+ __releases(ci->i_ceph_lock)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
@@ -2453,7 +2452,7 @@
}
BUG_ON(cap->issued & ~cap->implemented);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (writeback)
/*
* queue inode for writeback: we can't actually call
@@ -2483,7 +2482,7 @@
struct ceph_mds_caps *m,
struct ceph_mds_session *session,
struct ceph_cap *cap)
- __releases(inode->i_lock)
+ __releases(ci->i_ceph_lock)
{
struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
@@ -2539,7 +2538,7 @@
wake_up_all(&ci->i_cap_wq);
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (drop)
iput(inode);
}
@@ -2562,7 +2561,7 @@
dout("handle_cap_flushsnap_ack inode %p ci %p mds%d follows %lld\n",
inode, ci, session->s_mds, follows);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
list_for_each_entry(capsnap, &ci->i_cap_snaps, ci_item) {
if (capsnap->follows == follows) {
if (capsnap->flush_tid != flush_tid) {
@@ -2585,7 +2584,7 @@
capsnap, capsnap->follows);
}
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (drop)
iput(inode);
}
@@ -2598,7 +2597,7 @@
static void handle_cap_trunc(struct inode *inode,
struct ceph_mds_caps *trunc,
struct ceph_mds_session *session)
- __releases(inode->i_lock)
+ __releases(ci->i_ceph_lock)
{
struct ceph_inode_info *ci = ceph_inode(inode);
int mds = session->s_mds;
@@ -2617,7 +2616,7 @@
inode, mds, seq, truncate_size, truncate_seq);
queue_trunc = ceph_fill_file_size(inode, issued,
truncate_seq, truncate_size, size);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (queue_trunc)
ceph_queue_vmtruncate(inode);
@@ -2646,7 +2645,7 @@
dout("handle_cap_export inode %p ci %p mds%d mseq %d\n",
inode, ci, mds, mseq);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
/* make sure we haven't seen a higher mseq */
for (p = rb_first(&ci->i_caps); p; p = rb_next(p)) {
@@ -2690,7 +2689,7 @@
}
/* else, we already released it */
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
/*
@@ -2745,9 +2744,9 @@
up_read(&mdsc->snap_rwsem);
/* make sure we re-request max_size, if necessary */
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_requested_max_size = 0;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
/*
@@ -2762,6 +2761,7 @@
struct ceph_mds_client *mdsc = session->s_mdsc;
struct super_block *sb = mdsc->fsc->sb;
struct inode *inode;
+ struct ceph_inode_info *ci;
struct ceph_cap *cap;
struct ceph_mds_caps *h;
int mds = session->s_mds;
@@ -2815,6 +2815,7 @@
/* lookup ino */
inode = ceph_find_inode(sb, vino);
+ ci = ceph_inode(inode);
dout(" op %s ino %llx.%llx inode %p\n", ceph_cap_op_name(op), vino.ino,
vino.snap, inode);
if (!inode) {
@@ -2844,16 +2845,16 @@
}
/* the rest require a cap */
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = __get_cap_for_mds(ceph_inode(inode), mds);
if (!cap) {
dout(" no cap on %p ino %llx.%llx from mds%d\n",
inode, ceph_ino(inode), ceph_snap(inode), mds);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
goto flush_cap_releases;
}
- /* note that each of these drops i_lock for us */
+ /* note that each of these drops i_ceph_lock for us */
switch (op) {
case CEPH_CAP_OP_REVOKE:
case CEPH_CAP_OP_GRANT:
@@ -2869,7 +2870,7 @@
break;
default:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
pr_err("ceph_handle_caps: unknown cap op %d %s\n", op,
ceph_cap_op_name(op));
}
@@ -2962,13 +2963,13 @@
struct inode *inode = &ci->vfs_inode;
int last = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout("put_fmode %p fmode %d %d -> %d\n", inode, fmode,
ci->i_nr_by_mode[fmode], ci->i_nr_by_mode[fmode]-1);
BUG_ON(ci->i_nr_by_mode[fmode] == 0);
if (--ci->i_nr_by_mode[fmode] == 0)
last++;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (last && ci->i_vino.snap == CEPH_NOSNAP)
ceph_check_caps(ci, 0, NULL);
@@ -2991,7 +2992,7 @@
int used, dirty;
int ret = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
used = __ceph_caps_used(ci);
dirty = __ceph_caps_dirty(ci);
@@ -3046,7 +3047,7 @@
inode, cap, ceph_cap_string(cap->issued));
}
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return ret;
}
@@ -3061,7 +3062,7 @@
/*
* force an record for the directory caps if we have a dentry lease.
- * this is racy (can't take i_lock and d_lock together), but it
+ * this is racy (can't take i_ceph_lock and d_lock together), but it
* doesn't have to be perfect; the mds will revoke anything we don't
* release.
*/
diff --git a/fs/ceph/dir.c b/fs/ceph/dir.c
index bca3948..3eeb976 100644
--- a/fs/ceph/dir.c
+++ b/fs/ceph/dir.c
@@ -281,18 +281,18 @@
}
/* can we use the dcache? */
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if ((filp->f_pos == 2 || fi->dentry) &&
!ceph_test_mount_opt(fsc, NOASYNCREADDIR) &&
ceph_snap(inode) != CEPH_SNAPDIR &&
ceph_dir_test_complete(inode) &&
__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1)) {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
err = __dcache_readdir(filp, dirent, filldir);
if (err != -EAGAIN)
return err;
} else {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
if (fi->dentry) {
err = note_last_dentry(fi, fi->dentry->d_name.name,
@@ -428,12 +428,12 @@
* were released during the whole readdir, and we should have
* the complete dir contents in our cache.
*/
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_release_count == fi->dir_release_count) {
ceph_dir_set_complete(inode);
ci->i_max_offset = filp->f_pos;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("readdir %p filp %p done.\n", inode, filp);
return 0;
@@ -607,7 +607,7 @@
struct ceph_inode_info *ci = ceph_inode(dir);
struct ceph_dentry_info *di = ceph_dentry(dentry);
- spin_lock(&dir->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout(" dir %p flags are %d\n", dir, ci->i_ceph_flags);
if (strncmp(dentry->d_name.name,
fsc->mount_options->snapdir_name,
@@ -615,13 +615,13 @@
!is_root_ceph_dentry(dir, dentry) &&
ceph_dir_test_complete(dir) &&
(__ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1))) {
- spin_unlock(&dir->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout(" dir %p complete, -ENOENT\n", dir);
d_add(dentry, NULL);
di->lease_shared_gen = ci->i_shared_gen;
return NULL;
}
- spin_unlock(&dir->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
op = ceph_snap(dir) == CEPH_SNAPDIR ?
@@ -841,12 +841,12 @@
struct ceph_inode_info *ci = ceph_inode(inode);
int drop = CEPH_CAP_LINK_SHARED | CEPH_CAP_LINK_EXCL;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (inode->i_nlink == 1) {
drop |= ~(__ceph_caps_wanted(ci) | CEPH_CAP_PIN);
ci->i_ceph_flags |= CEPH_I_NODELAY;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return drop;
}
@@ -1015,10 +1015,10 @@
struct ceph_dentry_info *di = ceph_dentry(dentry);
int valid = 0;
- spin_lock(&dir->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_shared_gen == di->lease_shared_gen)
valid = __ceph_caps_issued_mask(ci, CEPH_CAP_FILE_SHARED, 1);
- spin_unlock(&dir->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("dir_lease_is_valid dir %p v%u dentry %p v%u = %d\n",
dir, (unsigned)ci->i_shared_gen, dentry,
(unsigned)di->lease_shared_gen, valid);
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index ce549d3..ed72428 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -147,9 +147,9 @@
/* trivially open snapdir */
if (ceph_snap(inode) == CEPH_SNAPDIR) {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__ceph_get_fmode(ci, fmode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return ceph_init_file(inode, file, fmode);
}
@@ -158,7 +158,7 @@
* write) or any MDS (for read). Update wanted set
* asynchronously.
*/
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (__ceph_is_any_real_caps(ci) &&
(((fmode & CEPH_FILE_MODE_WR) == 0) || ci->i_auth_cap)) {
int mds_wanted = __ceph_caps_mds_wanted(ci);
@@ -168,7 +168,7 @@
inode, fmode, ceph_cap_string(wanted),
ceph_cap_string(issued));
__ceph_get_fmode(ci, fmode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
/* adjust wanted? */
if ((issued & wanted) != wanted &&
@@ -180,10 +180,10 @@
} else if (ceph_snap(inode) != CEPH_NOSNAP &&
(ci->i_snap_caps & wanted) == wanted) {
__ceph_get_fmode(ci, fmode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return ceph_init_file(inode, file, fmode);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("open fmode %d wants %s\n", fmode, ceph_cap_string(wanted));
req = prepare_open_request(inode->i_sb, flags, 0);
@@ -743,9 +743,9 @@
*/
int dirty;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
ceph_put_cap_refs(ci, got);
ret = generic_file_aio_write(iocb, iov, nr_segs, pos);
@@ -764,9 +764,9 @@
if (ret >= 0) {
int dirty;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_FILE_WR);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
}
@@ -797,7 +797,8 @@
mutex_lock(&inode->i_mutex);
__ceph_do_pending_vmtruncate(inode);
- if (origin != SEEK_CUR || origin != SEEK_SET) {
+
+ if (origin == SEEK_END || origin == SEEK_DATA || origin == SEEK_HOLE) {
ret = ceph_do_getattr(inode, CEPH_STAT_CAP_SIZE);
if (ret < 0) {
offset = ret;
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 116f365..87fb132 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -297,6 +297,8 @@
dout("alloc_inode %p\n", &ci->vfs_inode);
+ spin_lock_init(&ci->i_ceph_lock);
+
ci->i_version = 0;
ci->i_time_warp_seq = 0;
ci->i_ceph_flags = 0;
@@ -583,7 +585,7 @@
iinfo->xattr_len);
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
/*
* provided version will be odd if inode value is projected,
@@ -680,7 +682,7 @@
char *sym;
BUG_ON(symlen != inode->i_size);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
err = -ENOMEM;
sym = kmalloc(symlen+1, GFP_NOFS);
@@ -689,7 +691,7 @@
memcpy(sym, iinfo->symlink, symlen);
sym[symlen] = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (!ci->i_symlink)
ci->i_symlink = sym;
else
@@ -715,7 +717,7 @@
}
no_change:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
/* queue truncate if we saw i_size decrease */
if (queue_trunc)
@@ -750,13 +752,13 @@
info->cap.flags,
caps_reservation);
} else {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout(" %p got snap_caps %s\n", inode,
ceph_cap_string(le32_to_cpu(info->cap.caps)));
ci->i_snap_caps |= le32_to_cpu(info->cap.caps);
if (cap_fmode >= 0)
__ceph_get_fmode(ci, cap_fmode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
} else if (cap_fmode >= 0) {
pr_warning("mds issued no caps on %llx.%llx\n",
@@ -849,19 +851,20 @@
{
struct dentry *dir = dn->d_parent;
struct inode *inode = dir->d_inode;
+ struct ceph_inode_info *ci = ceph_inode(inode);
struct ceph_dentry_info *di;
BUG_ON(!inode);
di = ceph_dentry(dn);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (!ceph_dir_test_complete(inode)) {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return;
}
di->offset = ceph_inode(inode)->i_max_offset++;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
spin_lock(&dir->d_lock);
spin_lock_nested(&dn->d_lock, DENTRY_D_LOCK_NESTED);
@@ -1308,7 +1311,7 @@
struct ceph_inode_info *ci = ceph_inode(inode);
int ret = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout("set_size %p %llu -> %llu\n", inode, inode->i_size, size);
inode->i_size = size;
inode->i_blocks = (size + (1 << 9) - 1) >> 9;
@@ -1318,7 +1321,7 @@
(ci->i_reported_size << 1) < ci->i_max_size)
ret = 1;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return ret;
}
@@ -1376,20 +1379,20 @@
u32 orig_gen;
int check = 0;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout("invalidate_pages %p gen %d revoking %d\n", inode,
ci->i_rdcache_gen, ci->i_rdcache_revoking);
if (ci->i_rdcache_revoking != ci->i_rdcache_gen) {
/* nevermind! */
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
goto out;
}
orig_gen = ci->i_rdcache_gen;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
truncate_inode_pages(&inode->i_data, 0);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (orig_gen == ci->i_rdcache_gen &&
orig_gen == ci->i_rdcache_revoking) {
dout("invalidate_pages %p gen %d successful\n", inode,
@@ -1401,7 +1404,7 @@
inode, orig_gen, ci->i_rdcache_gen,
ci->i_rdcache_revoking);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (check)
ceph_check_caps(ci, 0, NULL);
@@ -1460,10 +1463,10 @@
int wrbuffer_refs, wake = 0;
retry:
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_truncate_pending == 0) {
dout("__do_pending_vmtruncate %p none pending\n", inode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return;
}
@@ -1474,7 +1477,7 @@
if (ci->i_wrbuffer_ref_head < ci->i_wrbuffer_ref) {
dout("__do_pending_vmtruncate %p flushing snaps first\n",
inode);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
filemap_write_and_wait_range(&inode->i_data, 0,
inode->i_sb->s_maxbytes);
goto retry;
@@ -1484,15 +1487,15 @@
wrbuffer_refs = ci->i_wrbuffer_ref;
dout("__do_pending_vmtruncate %p (%d) to %lld\n", inode,
ci->i_truncate_pending, to);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
truncate_inode_pages(inode->i_mapping, to);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_truncate_pending--;
if (ci->i_truncate_pending == 0)
wake = 1;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (wrbuffer_refs == 0)
ceph_check_caps(ci, CHECK_CAPS_AUTHONLY, NULL);
@@ -1547,7 +1550,7 @@
if (IS_ERR(req))
return PTR_ERR(req);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
issued = __ceph_caps_issued(ci, NULL);
dout("setattr %p issued %s\n", inode, ceph_cap_string(issued));
@@ -1695,7 +1698,7 @@
}
release &= issued;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (inode_dirty_flags)
__mark_inode_dirty(inode, inode_dirty_flags);
@@ -1717,7 +1720,7 @@
__ceph_do_pending_vmtruncate(inode);
return err;
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
ceph_mdsc_put_request(req);
return err;
}
diff --git a/fs/ceph/ioctl.c b/fs/ceph/ioctl.c
index 5a14c29..790914a59 100644
--- a/fs/ceph/ioctl.c
+++ b/fs/ceph/ioctl.c
@@ -241,11 +241,11 @@
struct ceph_inode_info *ci = ceph_inode(inode);
if ((fi->fmode & CEPH_FILE_MODE_LAZY) == 0) {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_nr_by_mode[fi->fmode]--;
fi->fmode |= CEPH_FILE_MODE_LAZY;
ci->i_nr_by_mode[fi->fmode]++;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout("ioctl_layzio: file %p marked lazy\n", file);
ceph_check_caps(ci, 0, NULL);
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 264ab70..6203d80 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -732,21 +732,21 @@
}
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap = NULL;
if (mode == USE_AUTH_MDS)
cap = ci->i_auth_cap;
if (!cap && !RB_EMPTY_ROOT(&ci->i_caps))
cap = rb_entry(rb_first(&ci->i_caps), struct ceph_cap, ci_node);
if (!cap) {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
goto random;
}
mds = cap->session->s_mds;
dout("choose_mds %p %llx.%llx mds%d (%scap %p)\n",
inode, ceph_vinop(inode), mds,
cap == ci->i_auth_cap ? "auth " : "", cap);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return mds;
random:
@@ -951,7 +951,7 @@
dout("removing cap %p, ci is %p, inode is %p\n",
cap, ci, &ci->vfs_inode);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__ceph_remove_cap(cap);
if (!__ceph_is_any_real_caps(ci)) {
struct ceph_mds_client *mdsc =
@@ -984,7 +984,7 @@
}
spin_unlock(&mdsc->cap_dirty_lock);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
while (drop--)
iput(inode);
return 0;
@@ -1015,10 +1015,10 @@
wake_up_all(&ci->i_cap_wq);
if (arg) {
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_wanted_max_size = 0;
ci->i_requested_max_size = 0;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
return 0;
}
@@ -1151,7 +1151,7 @@
if (session->s_trim_caps <= 0)
return -1;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
mine = cap->issued | cap->implemented;
used = __ceph_caps_used(ci);
oissued = __ceph_caps_issued_other(ci, cap);
@@ -1170,7 +1170,7 @@
__ceph_remove_cap(cap);
} else {
/* try to drop referring dentries */
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
d_prune_aliases(inode);
dout("trim_caps_cb %p cap %p pruned, count now %d\n",
inode, cap, atomic_read(&inode->i_count));
@@ -1178,7 +1178,7 @@
}
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return 0;
}
@@ -1296,7 +1296,7 @@
i_flushing_item);
struct inode *inode = &ci->vfs_inode;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_cap_flush_seq <= want_flush_seq) {
dout("check_cap_flush still flushing %p "
"seq %lld <= %lld to mds%d\n", inode,
@@ -1304,7 +1304,7 @@
session->s_mds);
ret = 0;
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
mutex_unlock(&session->s_mutex);
ceph_put_mds_session(session);
@@ -1495,6 +1495,7 @@
pos, temp);
} else if (stop_on_nosnap && inode &&
ceph_snap(inode) == CEPH_NOSNAP) {
+ spin_unlock(&temp->d_lock);
break;
} else {
pos -= temp->d_name.len;
@@ -2011,10 +2012,10 @@
struct ceph_inode_info *ci = ceph_inode(inode);
dout("invalidate_dir_request %p (D_COMPLETE, lease(s))\n", inode);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ceph_dir_clear_complete(inode);
ci->i_release_count++;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (req->r_dentry)
ceph_invalidate_dentry_lease(req->r_dentry);
@@ -2422,7 +2423,7 @@
if (err)
goto out_free;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
cap->seq = 0; /* reset cap seq */
cap->issue_seq = 0; /* and issue_seq */
@@ -2445,7 +2446,7 @@
rec.v1.pathbase = cpu_to_le64(pathbase);
reclen = sizeof(rec.v1);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (recon_state->flock) {
int num_fcntl_locks, num_flock_locks;
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 4bb2399..a50ca0e 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -20,7 +20,7 @@
*
* mdsc->snap_rwsem
*
- * inode->i_lock
+ * ci->i_ceph_lock
* mdsc->snap_flush_lock
* mdsc->cap_delay_lock
*
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index e264371..a559c80 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -446,7 +446,7 @@
return;
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
used = __ceph_caps_used(ci);
dirty = __ceph_caps_dirty(ci);
@@ -528,7 +528,7 @@
kfree(capsnap);
}
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
/*
@@ -537,7 +537,7 @@
*
* If capsnap can now be flushed, add to snap_flush list, and return 1.
*
- * Caller must hold i_lock.
+ * Caller must hold i_ceph_lock.
*/
int __ceph_finish_cap_snap(struct ceph_inode_info *ci,
struct ceph_cap_snap *capsnap)
@@ -739,9 +739,9 @@
inode = &ci->vfs_inode;
ihold(inode);
spin_unlock(&mdsc->snap_flush_lock);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__ceph_flush_snaps(ci, &session, 0);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
iput(inode);
spin_lock(&mdsc->snap_flush_lock);
}
@@ -847,7 +847,7 @@
continue;
ci = ceph_inode(inode);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (!ci->i_snap_realm)
goto skip_inode;
/*
@@ -876,7 +876,7 @@
oldrealm = ci->i_snap_realm;
ci->i_snap_realm = realm;
spin_unlock(&realm->inodes_with_caps_lock);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
ceph_get_snap_realm(mdsc, realm);
ceph_put_snap_realm(mdsc, oldrealm);
@@ -885,7 +885,7 @@
continue;
skip_inode:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
iput(inode);
}
diff --git a/fs/ceph/super.c b/fs/ceph/super.c
index 8dc73a5..b48f15f 100644
--- a/fs/ceph/super.c
+++ b/fs/ceph/super.c
@@ -383,7 +383,7 @@
if (fsopt->rsize != CEPH_RSIZE_DEFAULT)
seq_printf(m, ",rsize=%d", fsopt->rsize);
if (fsopt->rasize != CEPH_RASIZE_DEFAULT)
- seq_printf(m, ",rasize=%d", fsopt->rsize);
+ seq_printf(m, ",rasize=%d", fsopt->rasize);
if (fsopt->congestion_kb != default_congestion_kb())
seq_printf(m, ",write_congestion_kb=%d", fsopt->congestion_kb);
if (fsopt->caps_wanted_delay_min != CEPH_CAPS_WANTED_DELAY_MIN_DEFAULT)
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index 01bf189..edcbf37 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -220,7 +220,7 @@
* The locking for D_COMPLETE is a bit odd:
* - we can clear it at almost any time (see ceph_d_prune)
* - it is only meaningful if:
- * - we hold dir inode i_lock
+ * - we hold dir inode i_ceph_lock
* - we hold dir FILE_SHARED caps
* - the dentry D_COMPLETE is set
*/
@@ -250,6 +250,8 @@
struct ceph_inode_info {
struct ceph_vino i_vino; /* ceph ino + snap */
+ spinlock_t i_ceph_lock;
+
u64 i_version;
u32 i_time_warp_seq;
@@ -271,7 +273,7 @@
struct ceph_inode_xattrs_info i_xattrs;
- /* capabilities. protected _both_ by i_lock and cap->session's
+ /* capabilities. protected _both_ by i_ceph_lock and cap->session's
* s_mutex. */
struct rb_root i_caps; /* cap list */
struct ceph_cap *i_auth_cap; /* authoritative cap, if any */
@@ -437,18 +439,18 @@
{
struct ceph_inode_info *ci = ceph_inode(inode);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_ceph_flags &= ~mask;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
static inline void ceph_i_set(struct inode *inode, unsigned mask)
{
struct ceph_inode_info *ci = ceph_inode(inode);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
ci->i_ceph_flags |= mask;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
}
static inline bool ceph_i_test(struct inode *inode, unsigned mask)
@@ -456,9 +458,9 @@
struct ceph_inode_info *ci = ceph_inode(inode);
bool r;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
r = (ci->i_ceph_flags & mask) == mask;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return r;
}
@@ -508,9 +510,9 @@
static inline int ceph_caps_issued(struct ceph_inode_info *ci)
{
int issued;
- spin_lock(&ci->vfs_inode.i_lock);
+ spin_lock(&ci->i_ceph_lock);
issued = __ceph_caps_issued(ci, NULL);
- spin_unlock(&ci->vfs_inode.i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return issued;
}
@@ -518,9 +520,9 @@
int touch)
{
int r;
- spin_lock(&ci->vfs_inode.i_lock);
+ spin_lock(&ci->i_ceph_lock);
r = __ceph_caps_issued_mask(ci, mask, touch);
- spin_unlock(&ci->vfs_inode.i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return r;
}
@@ -743,10 +745,9 @@
extern void __ceph_remove_cap(struct ceph_cap *cap);
static inline void ceph_remove_cap(struct ceph_cap *cap)
{
- struct inode *inode = &cap->ci->vfs_inode;
- spin_lock(&inode->i_lock);
+ spin_lock(&cap->ci->i_ceph_lock);
__ceph_remove_cap(cap);
- spin_unlock(&inode->i_lock);
+ spin_unlock(&cap->ci->i_ceph_lock);
}
extern void ceph_put_cap(struct ceph_mds_client *mdsc,
struct ceph_cap *cap);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 96c6739..a5e36e4 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -343,8 +343,8 @@
}
static int __build_xattrs(struct inode *inode)
- __releases(inode->i_lock)
- __acquires(inode->i_lock)
+ __releases(ci->i_ceph_lock)
+ __acquires(ci->i_ceph_lock)
{
u32 namelen;
u32 numattr = 0;
@@ -372,7 +372,7 @@
end = p + ci->i_xattrs.blob->vec.iov_len;
ceph_decode_32_safe(&p, end, numattr, bad);
xattr_version = ci->i_xattrs.version;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
xattrs = kcalloc(numattr, sizeof(struct ceph_xattr *),
GFP_NOFS);
@@ -387,7 +387,7 @@
goto bad_lock;
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_xattrs.version != xattr_version) {
/* lost a race, retry */
for (i = 0; i < numattr; i++)
@@ -418,7 +418,7 @@
return err;
bad_lock:
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
bad:
if (xattrs) {
for (i = 0; i < numattr; i++)
@@ -512,7 +512,7 @@
if (vxattrs)
vxattr = ceph_match_vxattr(vxattrs, name);
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout("getxattr %p ver=%lld index_ver=%lld\n", inode,
ci->i_xattrs.version, ci->i_xattrs.index_version);
@@ -520,14 +520,14 @@
(ci->i_xattrs.index_version >= ci->i_xattrs.version)) {
goto get_xattr;
} else {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
/* get xattrs from mds (if we don't already have them) */
err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR);
if (err)
return err;
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (vxattr && vxattr->readonly) {
err = vxattr->getxattr_cb(ci, value, size);
@@ -558,7 +558,7 @@
memcpy(value, xattr->val, xattr->val_len);
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return err;
}
@@ -573,7 +573,7 @@
u32 len;
int i;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
dout("listxattr %p ver=%lld index_ver=%lld\n", inode,
ci->i_xattrs.version, ci->i_xattrs.index_version);
@@ -581,13 +581,13 @@
(ci->i_xattrs.index_version >= ci->i_xattrs.version)) {
goto list_xattr;
} else {
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
err = ceph_do_getattr(inode, CEPH_STAT_CAP_XATTR);
if (err)
return err;
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
err = __build_xattrs(inode);
if (err < 0)
@@ -619,7 +619,7 @@
}
out:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
return err;
}
@@ -739,7 +739,7 @@
if (!xattr)
goto out;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
retry:
issued = __ceph_caps_issued(ci, NULL);
if (!(issued & CEPH_CAP_XATTR_EXCL))
@@ -752,12 +752,12 @@
required_blob_size > ci->i_xattrs.prealloc_blob->alloc_len) {
struct ceph_buffer *blob = NULL;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
dout(" preaallocating new blob size=%d\n", required_blob_size);
blob = ceph_buffer_new(required_blob_size, GFP_NOFS);
if (!blob)
goto out;
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
if (ci->i_xattrs.prealloc_blob)
ceph_buffer_put(ci->i_xattrs.prealloc_blob);
ci->i_xattrs.prealloc_blob = blob;
@@ -770,13 +770,13 @@
dirty = __ceph_mark_dirty_caps(ci, CEPH_CAP_XATTR_EXCL);
ci->i_xattrs.dirty = true;
inode->i_ctime = CURRENT_TIME;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
return err;
do_sync:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
err = ceph_sync_setxattr(dentry, name, value, size, flags);
out:
kfree(newname);
@@ -833,7 +833,7 @@
return -EOPNOTSUPP;
}
- spin_lock(&inode->i_lock);
+ spin_lock(&ci->i_ceph_lock);
__build_xattrs(inode);
issued = __ceph_caps_issued(ci, NULL);
dout("removexattr %p issued %s\n", inode, ceph_cap_string(issued));
@@ -846,12 +846,12 @@
ci->i_xattrs.dirty = true;
inode->i_ctime = CURRENT_TIME;
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
if (dirty)
__mark_inode_dirty(inode, dirty);
return err;
do_sync:
- spin_unlock(&inode->i_lock);
+ spin_unlock(&ci->i_ceph_lock);
err = ceph_send_removexattr(dentry, name);
return err;
}
diff --git a/fs/configfs/inode.c b/fs/configfs/inode.c
index ca418aa..9d8715c 100644
--- a/fs/configfs/inode.c
+++ b/fs/configfs/inode.c
@@ -292,7 +292,7 @@
return bdi_init(&configfs_backing_dev_info);
}
-void __exit configfs_inode_exit(void)
+void configfs_inode_exit(void)
{
bdi_destroy(&configfs_backing_dev_info);
}
diff --git a/fs/configfs/mount.c b/fs/configfs/mount.c
index ecc6217..276e15c 100644
--- a/fs/configfs/mount.c
+++ b/fs/configfs/mount.c
@@ -143,28 +143,26 @@
goto out;
config_kobj = kobject_create_and_add("config", kernel_kobj);
- if (!config_kobj) {
- kmem_cache_destroy(configfs_dir_cachep);
- configfs_dir_cachep = NULL;
- goto out;
- }
-
- err = register_filesystem(&configfs_fs_type);
- if (err) {
- printk(KERN_ERR "configfs: Unable to register filesystem!\n");
- kobject_put(config_kobj);
- kmem_cache_destroy(configfs_dir_cachep);
- configfs_dir_cachep = NULL;
- goto out;
- }
+ if (!config_kobj)
+ goto out2;
err = configfs_inode_init();
- if (err) {
- unregister_filesystem(&configfs_fs_type);
- kobject_put(config_kobj);
- kmem_cache_destroy(configfs_dir_cachep);
- configfs_dir_cachep = NULL;
- }
+ if (err)
+ goto out3;
+
+ err = register_filesystem(&configfs_fs_type);
+ if (err)
+ goto out4;
+
+ return 0;
+out4:
+ printk(KERN_ERR "configfs: Unable to register filesystem!\n");
+ configfs_inode_exit();
+out3:
+ kobject_put(config_kobj);
+out2:
+ kmem_cache_destroy(configfs_dir_cachep);
+ configfs_dir_cachep = NULL;
out:
return err;
}
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index 61fa9e1..607b155 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1095,7 +1095,7 @@
le32_to_cpu(EXT_FIRST_INDEX(neh)->ei_block),
ext4_idx_pblock(EXT_FIRST_INDEX(neh)));
- neh->eh_depth = cpu_to_le16(neh->eh_depth + 1);
+ neh->eh_depth = cpu_to_le16(le16_to_cpu(neh->eh_depth) + 1);
ext4_mark_inode_dirty(handle, inode);
out:
brelse(bh);
@@ -2955,7 +2955,6 @@
/* Pre-conditions */
BUG_ON(!ext4_ext_is_uninitialized(ex));
BUG_ON(!in_range(map->m_lblk, ee_block, ee_len));
- BUG_ON(map->m_lblk + map->m_len > ee_block + ee_len);
/*
* Attempt to transfer newly initialized blocks from the currently
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 848f436..92655fd 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1339,8 +1339,11 @@
clear_buffer_unwritten(bh);
}
- /* skip page if block allocation undone */
- if (buffer_delay(bh) || buffer_unwritten(bh))
+ /*
+ * skip page if block allocation undone and
+ * block is dirty
+ */
+ if (ext4_bh_delay_or_unwritten(NULL, bh))
skip_page = 1;
bh = bh->b_this_page;
block_start += bh->b_size;
@@ -2387,7 +2390,6 @@
pgoff_t index;
struct inode *inode = mapping->host;
handle_t *handle;
- loff_t page_len;
index = pos >> PAGE_CACHE_SHIFT;
@@ -2434,13 +2436,6 @@
*/
if (pos + len > inode->i_size)
ext4_truncate_failed_write(inode);
- } else {
- page_len = pos & (PAGE_CACHE_SIZE - 1);
- if (page_len > 0) {
- ret = ext4_discard_partial_page_buffers_no_lock(handle,
- inode, page, pos - page_len, page_len,
- EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
- }
}
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
@@ -2483,7 +2478,6 @@
loff_t new_i_size;
unsigned long start, end;
int write_mode = (int)(unsigned long)fsdata;
- loff_t page_len;
if (write_mode == FALL_BACK_TO_NONDELALLOC) {
if (ext4_should_order_data(inode)) {
@@ -2508,7 +2502,7 @@
*/
new_i_size = pos + copied;
- if (new_i_size > EXT4_I(inode)->i_disksize) {
+ if (copied && new_i_size > EXT4_I(inode)->i_disksize) {
if (ext4_da_should_update_i_disksize(page, end)) {
down_write(&EXT4_I(inode)->i_data_sem);
if (new_i_size > EXT4_I(inode)->i_disksize) {
@@ -2532,16 +2526,6 @@
}
ret2 = generic_write_end(file, mapping, pos, len, copied,
page, fsdata);
-
- page_len = PAGE_CACHE_SIZE -
- ((pos + copied - 1) & (PAGE_CACHE_SIZE - 1));
-
- if (page_len > 0) {
- ret = ext4_discard_partial_page_buffers_no_lock(handle,
- inode, page, pos + copied - 1, page_len,
- EXT4_DISCARD_PARTIAL_PG_ZERO_UNMAPPED);
- }
-
copied = ret2;
if (ret2 < 0)
ret = ret2;
@@ -2781,10 +2765,11 @@
iocb->private, io_end->inode->i_ino, iocb, offset,
size);
+ iocb->private = NULL;
+
/* if not aio dio with unwritten extents, just free io and return */
if (!(io_end->flag & EXT4_IO_END_UNWRITTEN)) {
ext4_free_io_end(io_end);
- iocb->private = NULL;
out:
if (is_async)
aio_complete(iocb, ret, 0);
@@ -2807,7 +2792,6 @@
spin_unlock_irqrestore(&ei->i_completed_io_lock, flags);
/* queue the work to convert unwritten extents to written */
- iocb->private = NULL;
queue_work(wq, &io_end->work);
/* XXX: probably should move into the real I/O completion handler */
@@ -3203,26 +3187,8 @@
iblock = index << (PAGE_CACHE_SHIFT - inode->i_sb->s_blocksize_bits);
- if (!page_has_buffers(page)) {
- /*
- * If the range to be discarded covers a partial block
- * we need to get the page buffers. This is because
- * partial blocks cannot be released and the page needs
- * to be updated with the contents of the block before
- * we write the zeros on top of it.
- */
- if ((from & (blocksize - 1)) ||
- ((from + length) & (blocksize - 1))) {
- create_empty_buffers(page, blocksize, 0);
- } else {
- /*
- * If there are no partial blocks,
- * there is nothing to update,
- * so we can return now
- */
- return 0;
- }
- }
+ if (!page_has_buffers(page))
+ create_empty_buffers(page, blocksize, 0);
/* Find the buffer that contains "offset" */
bh = page_buffers(page);
diff --git a/fs/ext4/page-io.c b/fs/ext4/page-io.c
index 7ce1d0b..7e106c8 100644
--- a/fs/ext4/page-io.c
+++ b/fs/ext4/page-io.c
@@ -385,6 +385,18 @@
block_end = block_start + blocksize;
if (block_start >= len) {
+ /*
+ * Comments copied from block_write_full_page_endio:
+ *
+ * The page straddles i_size. It must be zeroed out on
+ * each and every writepage invocation because it may
+ * be mmapped. "A file is mapped in multiples of the
+ * page size. For a file that is not a multiple of
+ * the page size, the remaining memory is zeroed when
+ * mapped, and writes to that region are not written
+ * out to the file."
+ */
+ zero_user_segment(page, block_start, block_end);
clear_buffer_dirty(bh);
set_buffer_uptodate(bh);
continue;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 3858767..3e1329e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -1155,9 +1155,9 @@
seq_puts(seq, ",block_validity");
if (!test_opt(sb, INIT_INODE_TABLE))
- seq_puts(seq, ",noinit_inode_table");
+ seq_puts(seq, ",noinit_itable");
else if (sbi->s_li_wait_mult != EXT4_DEF_LI_WAIT_MULT)
- seq_printf(seq, ",init_inode_table=%u",
+ seq_printf(seq, ",init_itable=%u",
(unsigned) sbi->s_li_wait_mult);
ext4_show_quota_options(seq, sb);
@@ -1333,8 +1333,7 @@
Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio,
Opt_dioread_nolock, Opt_dioread_lock,
- Opt_discard, Opt_nodiscard,
- Opt_init_inode_table, Opt_noinit_inode_table,
+ Opt_discard, Opt_nodiscard, Opt_init_itable, Opt_noinit_itable,
};
static const match_table_t tokens = {
@@ -1407,9 +1406,9 @@
{Opt_dioread_lock, "dioread_lock"},
{Opt_discard, "discard"},
{Opt_nodiscard, "nodiscard"},
- {Opt_init_inode_table, "init_itable=%u"},
- {Opt_init_inode_table, "init_itable"},
- {Opt_noinit_inode_table, "noinit_itable"},
+ {Opt_init_itable, "init_itable=%u"},
+ {Opt_init_itable, "init_itable"},
+ {Opt_noinit_itable, "noinit_itable"},
{Opt_err, NULL},
};
@@ -1892,7 +1891,7 @@
case Opt_dioread_lock:
clear_opt(sb, DIOREAD_NOLOCK);
break;
- case Opt_init_inode_table:
+ case Opt_init_itable:
set_opt(sb, INIT_INODE_TABLE);
if (args[0].from) {
if (match_int(&args[0], &option))
@@ -1903,7 +1902,7 @@
return 0;
sbi->s_li_wait_mult = option;
break;
- case Opt_noinit_inode_table:
+ case Opt_noinit_itable:
clear_opt(sb, INIT_INODE_TABLE);
break;
default:
diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c
index 73c3992..ac86f8b 100644
--- a/fs/fs-writeback.c
+++ b/fs/fs-writeback.c
@@ -156,6 +156,7 @@
* bdi_start_writeback - start writeback
* @bdi: the backing device to write from
* @nr_pages: the number of pages to write
+ * @reason: reason why some writeback work was initiated
*
* Description:
* This does WB_SYNC_NONE opportunistic writeback. The IO is only
@@ -1223,6 +1224,7 @@
* writeback_inodes_sb_nr - writeback dirty inodes from given super_block
* @sb: the superblock
* @nr: the number of pages to write
+ * @reason: reason why some writeback work initiated
*
* Start writeback on some inodes on this super_block. No guarantees are made
* on how many (if any) will be written, and this function does not wait
@@ -1251,6 +1253,7 @@
/**
* writeback_inodes_sb - writeback dirty inodes from given super_block
* @sb: the superblock
+ * @reason: reason why some writeback work was initiated
*
* Start writeback on some inodes on this super_block. No guarantees are made
* on how many (if any) will be written, and this function does not wait
@@ -1265,6 +1268,7 @@
/**
* writeback_inodes_sb_if_idle - start writeback if none underway
* @sb: the superblock
+ * @reason: reason why some writeback work was initiated
*
* Invoke writeback_inodes_sb if no writeback is currently underway.
* Returns 1 if writeback was started, 0 if not.
@@ -1285,6 +1289,7 @@
* writeback_inodes_sb_if_idle - start writeback if none underway
* @sb: the superblock
* @nr: the number of pages to write
+ * @reason: reason why some writeback work was initiated
*
* Invoke writeback_inodes_sb if no writeback is currently underway.
* Returns 1 if writeback was started, 0 if not.
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 5cb8614..2aaf3ea 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -1512,7 +1512,7 @@
else if (outarg->offset + num > file_size)
num = file_size - outarg->offset;
- while (num) {
+ while (num && req->num_pages < FUSE_MAX_PAGES_PER_REQ) {
struct page *page;
unsigned int this_num;
@@ -1526,6 +1526,7 @@
num -= this_num;
total_len += this_num;
+ index++;
}
req->misc.retrieve_in.offset = outarg->offset;
req->misc.retrieve_in.size = total_len;
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 594f07a..0c84100 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -1556,7 +1556,7 @@
struct inode *inode = file->f_path.dentry->d_inode;
mutex_lock(&inode->i_mutex);
- if (origin != SEEK_CUR || origin != SEEK_SET) {
+ if (origin != SEEK_CUR && origin != SEEK_SET) {
retval = fuse_update_attributes(inode, NULL, file, NULL);
if (retval)
goto exit;
@@ -1567,6 +1567,10 @@
offset += i_size_read(inode);
break;
case SEEK_CUR:
+ if (offset == 0) {
+ retval = file->f_pos;
+ goto exit;
+ }
offset += file->f_pos;
break;
case SEEK_DATA:
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 3e6d727..aa83109 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -1138,28 +1138,28 @@
{
int err;
- err = register_filesystem(&fuse_fs_type);
- if (err)
- goto out;
-
- err = register_fuseblk();
- if (err)
- goto out_unreg;
-
fuse_inode_cachep = kmem_cache_create("fuse_inode",
sizeof(struct fuse_inode),
0, SLAB_HWCACHE_ALIGN,
fuse_inode_init_once);
err = -ENOMEM;
if (!fuse_inode_cachep)
- goto out_unreg2;
+ goto out;
+
+ err = register_fuseblk();
+ if (err)
+ goto out2;
+
+ err = register_filesystem(&fuse_fs_type);
+ if (err)
+ goto out3;
return 0;
- out_unreg2:
+ out3:
unregister_fuseblk();
- out_unreg:
- unregister_filesystem(&fuse_fs_type);
+ out2:
+ kmem_cache_destroy(fuse_inode_cachep);
out:
return err;
}
diff --git a/fs/ncpfs/inode.c b/fs/ncpfs/inode.c
index 5b5fa33..cbd1a61 100644
--- a/fs/ncpfs/inode.c
+++ b/fs/ncpfs/inode.c
@@ -548,7 +548,7 @@
error = bdi_setup_and_register(&server->bdi, "ncpfs", BDI_CAP_MAP_COPY);
if (error)
- goto out_bdi;
+ goto out_fput;
server->ncp_filp = ncp_filp;
server->ncp_sock = sock;
@@ -559,7 +559,7 @@
error = -EBADF;
server->info_filp = fget(data.info_fd);
if (!server->info_filp)
- goto out_fput;
+ goto out_bdi;
error = -ENOTSOCK;
sock_inode = server->info_filp->f_path.dentry->d_inode;
if (!S_ISSOCK(sock_inode->i_mode))
@@ -746,9 +746,9 @@
out_fput2:
if (server->info_filp)
fput(server->info_filp);
-out_fput:
- bdi_destroy(&server->bdi);
out_bdi:
+ bdi_destroy(&server->bdi);
+out_fput:
/* 23/12/1998 Marcin Dalecki <dalecki@cs.net.pl>:
*
* The previously used put_filp(ncp_filp); was bogus, since
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 9a8a2b7..03102d9 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -91,20 +91,18 @@
void __init proc_root_init(void)
{
- struct vfsmount *mnt;
int err;
proc_init_inodecache();
err = register_filesystem(&proc_fs_type);
if (err)
return;
- mnt = kern_mount_data(&proc_fs_type, &init_pid_ns);
- if (IS_ERR(mnt)) {
+ err = pid_ns_prepare_proc(&init_pid_ns);
+ if (err) {
unregister_filesystem(&proc_fs_type);
return;
}
- init_pid_ns.proc_mnt = mnt;
proc_symlink("mounts", NULL, "self/mounts");
proc_net_init();
@@ -209,5 +207,5 @@
void pid_ns_release_proc(struct pid_namespace *ns)
{
- mntput(ns->proc_mnt);
+ kern_unmount(ns->proc_mnt);
}
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index 20403dc..ae0e76b 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2264,19 +2264,12 @@
return -EINVAL;
}
- err = register_filesystem(&ubifs_fs_type);
- if (err) {
- ubifs_err("cannot register file system, error %d", err);
- return err;
- }
-
- err = -ENOMEM;
ubifs_inode_slab = kmem_cache_create("ubifs_inode_slab",
sizeof(struct ubifs_inode), 0,
SLAB_MEM_SPREAD | SLAB_RECLAIM_ACCOUNT,
&inode_slab_ctor);
if (!ubifs_inode_slab)
- goto out_reg;
+ return -ENOMEM;
register_shrinker(&ubifs_shrinker_info);
@@ -2288,15 +2281,20 @@
if (err)
goto out_compr;
+ err = register_filesystem(&ubifs_fs_type);
+ if (err) {
+ ubifs_err("cannot register file system, error %d", err);
+ goto out_dbg;
+ }
return 0;
+out_dbg:
+ dbg_debugfs_exit();
out_compr:
ubifs_compressors_exit();
out_shrinker:
unregister_shrinker(&ubifs_shrinker_info);
kmem_cache_destroy(ubifs_inode_slab);
-out_reg:
- unregister_filesystem(&ubifs_fs_type);
return err;
}
/* late_initcall to let compressors initialize first */
diff --git a/include/drm/drm_pciids.h b/include/drm/drm_pciids.h
index 4e4fbb8..14b6cd0 100644
--- a/include/drm/drm_pciids.h
+++ b/include/drm/drm_pciids.h
@@ -182,8 +182,11 @@
{0x1002, 0x6748, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6749, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6750, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6751, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6758, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6759, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x675B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x675D, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x675F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6760, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6761, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -195,8 +198,10 @@
{0x1002, 0x6767, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6768, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6770, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x6772, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6778, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6779, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x677B, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CAICOS|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6841, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
{0x1002, 0x6842, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TURKS|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -246,6 +251,7 @@
{0x1002, 0x68f2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68f8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68f9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
+ {0x1002, 0x68fa, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
{0x1002, 0x68fe, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_CEDAR|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_NEW_MEMMAP}, \
{0x1002, 0x7101, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R520|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
@@ -488,6 +494,8 @@
{0x1002, 0x9647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x9648, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x964a, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x964b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x964c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x964e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x964f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SUMO|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP|RADEON_IS_IGP},\
{0x1002, 0x9710, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS880|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
@@ -502,6 +510,8 @@
{0x1002, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9806, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0x1002, 0x9807, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9808, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
+ {0x1002, 0x9809, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_PALM|RADEON_NEW_MEMMAP|RADEON_IS_IGP}, \
{0, 0, 0}
#define r128_PCI_IDS \
diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h
index d12f077..12e023c 100644
--- a/include/linux/amba/pl330.h
+++ b/include/linux/amba/pl330.h
@@ -12,17 +12,9 @@
#ifndef __AMBA_PL330_H_
#define __AMBA_PL330_H_
+#include <linux/dmaengine.h>
#include <asm/hardware/pl330.h>
-struct dma_pl330_peri {
- /*
- * Peri_Req i/f of the DMAC that is
- * peripheral could be reached from.
- */
- u8 peri_id; /* specific dma id */
- enum pl330_reqtype rqtype;
-};
-
struct dma_pl330_platdata {
/*
* Number of valid peripherals connected to DMAC.
@@ -33,9 +25,12 @@
*/
u8 nr_valid_peri;
/* Array of valid peripherals */
- struct dma_pl330_peri *peri;
+ u8 *peri_id;
+ /* Operational capabilities */
+ dma_cap_mask_t cap_mask;
/* Bytes to allocate for MC buffer */
unsigned mcbuf_sz;
};
+extern bool pl330_filter(struct dma_chan *chan, void *param);
#endif /* __AMBA_PL330_H_ */
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index c7a6d3b..94acd81 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -805,9 +805,6 @@
*/
extern struct request_queue *blk_init_queue_node(request_fn_proc *rfn,
spinlock_t *lock, int node_id);
-extern struct request_queue *blk_init_allocated_queue_node(struct request_queue *,
- request_fn_proc *,
- spinlock_t *, int node_id);
extern struct request_queue *blk_init_queue(request_fn_proc *, spinlock_t *);
extern struct request_queue *blk_init_allocated_queue(struct request_queue *,
request_fn_proc *, spinlock_t *);
diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h
index ef90cbd..57c9a8a 100644
--- a/include/linux/dma_remapping.h
+++ b/include/linux/dma_remapping.h
@@ -31,6 +31,7 @@
extern int iommu_calculate_agaw(struct intel_iommu *iommu);
extern int iommu_calculate_max_sagaw(struct intel_iommu *iommu);
extern int dmar_disabled;
+extern int intel_iommu_enabled;
#else
static inline int iommu_calculate_agaw(struct intel_iommu *iommu)
{
@@ -44,6 +45,7 @@
{
}
#define dmar_disabled (1)
+#define intel_iommu_enabled (0)
#endif
diff --git a/include/linux/gpio-pxa.h b/include/linux/gpio-pxa.h
new file mode 100644
index 0000000..05071ee
--- /dev/null
+++ b/include/linux/gpio-pxa.h
@@ -0,0 +1,16 @@
+#ifndef __GPIO_PXA_H
+#define __GPIO_PXA_H
+
+#define GPIO_bit(x) (1 << ((x) & 0x1f))
+
+#define gpio_to_bank(gpio) ((gpio) >> 5)
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+extern int pxa_irq_to_gpio(int irq);
+
+#endif /* __GPIO_PXA_H */
diff --git a/include/linux/log2.h b/include/linux/log2.h
index 25b8086..fd7ff3d 100644
--- a/include/linux/log2.h
+++ b/include/linux/log2.h
@@ -185,7 +185,6 @@
#define rounddown_pow_of_two(n) \
( \
__builtin_constant_p(n) ? ( \
- (n == 1) ? 0 : \
(1UL << ilog2(n))) : \
__rounddown_pow_of_two(n) \
)
diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h
index 415f2db..c8ef9bc 100644
--- a/include/linux/mmc/card.h
+++ b/include/linux/mmc/card.h
@@ -218,6 +218,7 @@
#define MMC_QUIRK_INAND_CMD38 (1<<6) /* iNAND devices have broken CMD38 */
#define MMC_QUIRK_BLK_NO_CMD23 (1<<7) /* Avoid CMD23 for regular multiblock */
#define MMC_QUIRK_BROKEN_BYTE_MODE_512 (1<<8) /* Avoid sending 512 bytes in */
+#define MMC_QUIRK_LONG_READ_TIME (1<<9) /* Data read time > CSD says */
/* byte mode */
unsigned int poweroff_notify_state; /* eMMC4.5 notify feature */
#define MMC_NO_POWER_NOTIFICATION 0
@@ -433,6 +434,11 @@
return c->quirks & MMC_QUIRK_BROKEN_BYTE_MODE_512;
}
+static inline int mmc_card_long_read_time(const struct mmc_card *c)
+{
+ return c->quirks & MMC_QUIRK_LONG_READ_TIME;
+}
+
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) (dev_name(&(c)->dev))
diff --git a/include/linux/platform_data/macb.h b/include/linux/platform_data/macb.h
new file mode 100644
index 0000000..e7c748f
--- /dev/null
+++ b/include/linux/platform_data/macb.h
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2004-2006 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACB_PDATA_H__
+#define __MACB_PDATA_H__
+
+struct macb_platform_data {
+ u32 phy_mask;
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+};
+
+#endif /* __MACB_PDATA_H__ */
diff --git a/include/sound/saif.h b/include/sound/saif.h
index d0e0de7..f22f3e1 100644
--- a/include/sound/saif.h
+++ b/include/sound/saif.h
@@ -10,7 +10,7 @@
#define __SOUND_SAIF_H__
struct mxs_saif_platform_data {
- int (*init) (void);
- int (*get_master_id) (unsigned int saif_id);
+ bool master_mode; /* if true use master mode */
+ int master_id; /* id of the master if in slave mode */
};
#endif
diff --git a/ipc/mqueue.c b/ipc/mqueue.c
index 2e0ecfc..5b4293d 100644
--- a/ipc/mqueue.c
+++ b/ipc/mqueue.c
@@ -1269,7 +1269,7 @@
void mq_put_mnt(struct ipc_namespace *ns)
{
- mntput(ns->mq_mnt);
+ kern_unmount(ns->mq_mnt);
}
static int __init init_mqueue_fs(void)
@@ -1291,11 +1291,9 @@
spin_lock_init(&mq_lock);
- init_ipc_ns.mq_mnt = kern_mount_data(&mqueue_fs_type, &init_ipc_ns);
- if (IS_ERR(init_ipc_ns.mq_mnt)) {
- error = PTR_ERR(init_ipc_ns.mq_mnt);
+ error = mq_init_ns(&init_ipc_ns);
+ if (error)
goto out_filesystem;
- }
return 0;
diff --git a/ipc/msgutil.c b/ipc/msgutil.c
index 8b5ce5d3..5652101 100644
--- a/ipc/msgutil.c
+++ b/ipc/msgutil.c
@@ -27,11 +27,6 @@
*/
struct ipc_namespace init_ipc_ns = {
.count = ATOMIC_INIT(1),
-#ifdef CONFIG_POSIX_MQUEUE
- .mq_queues_max = DFLT_QUEUESMAX,
- .mq_msg_max = DFLT_MSGMAX,
- .mq_msgsize_max = DFLT_MSGSIZEMAX,
-#endif
.user_ns = &init_user_ns,
};
diff --git a/mm/filemap.c b/mm/filemap.c
index c0018f2..c106d3b 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -2407,7 +2407,6 @@
iov_iter_count(i));
again:
-
/*
* Bring in the user page that we will copy from _first_.
* Otherwise there's a nasty deadlock on copying from the
@@ -2463,7 +2462,10 @@
written += copied;
balance_dirty_pages_ratelimited(mapping);
-
+ if (fatal_signal_pending(current)) {
+ status = -EINTR;
+ break;
+ }
} while (iov_iter_count(i));
return written ? written : status;
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 7125248..50f0824 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -411,8 +411,13 @@
*
* Returns @bdi's dirty limit in pages. The term "dirty" in the context of
* dirty balancing includes all PG_dirty, PG_writeback and NFS unstable pages.
- * And the "limit" in the name is not seriously taken as hard limit in
- * balance_dirty_pages().
+ *
+ * Note that balance_dirty_pages() will only seriously take it as a hard limit
+ * when sleeping max_pause per page is not enough to keep the dirty pages under
+ * control. For example, when the device is completely stalled due to some error
+ * conditions, or when there are 1000 dd tasks writing to a slow 10MB/s USB key.
+ * In the other normal situations, it acts more gently by throttling the tasks
+ * more (rather than completely block them) when the bdi dirty pages go high.
*
* It allocates high/low dirty limits to fast/slow devices, in order to prevent
* - starving fast devices
@@ -594,6 +599,13 @@
*/
if (unlikely(bdi_thresh > thresh))
bdi_thresh = thresh;
+ /*
+ * It's very possible that bdi_thresh is close to 0 not because the
+ * device is slow, but that it has remained inactive for long time.
+ * Honour such devices a reasonable good (hopefully IO efficient)
+ * threshold, so that the occasional writes won't be blocked and active
+ * writes can rampup the threshold quickly.
+ */
bdi_thresh = max(bdi_thresh, (limit - dirty) / 8);
/*
* scale global setpoint to bdi's:
@@ -977,8 +989,7 @@
*
* 8 serves as the safety ratio.
*/
- if (bdi_dirty)
- t = min(t, bdi_dirty * HZ / (8 * bw + 1));
+ t = min(t, bdi_dirty * HZ / (8 * bw + 1));
/*
* The pause time will be settled within range (max_pause/4, max_pause).
@@ -1136,6 +1147,19 @@
if (task_ratelimit)
break;
+ /*
+ * In the case of an unresponding NFS server and the NFS dirty
+ * pages exceeds dirty_thresh, give the other good bdi's a pipe
+ * to go through, so that tasks on them still remain responsive.
+ *
+ * In theory 1 page is enough to keep the comsumer-producer
+ * pipe going: the flusher cleans 1 page => the task dirties 1
+ * more page. However bdi_dirty has accounting errors. So use
+ * the larger and more IO friendly bdi_stat_error.
+ */
+ if (bdi_dirty <= bdi_stat_error(bdi))
+ break;
+
if (fatal_signal_pending(current))
break;
}
diff --git a/net/batman-adv/translation-table.c b/net/batman-adv/translation-table.c
index c7aafc7..5f09a57 100644
--- a/net/batman-adv/translation-table.c
+++ b/net/batman-adv/translation-table.c
@@ -245,9 +245,11 @@
if (tt_global_entry) {
/* This node is probably going to update its tt table */
tt_global_entry->orig_node->tt_poss_change = true;
- /* The global entry has to be marked as PENDING and has to be
+ /* The global entry has to be marked as ROAMING and has to be
* kept for consistency purpose */
- tt_global_entry->flags |= TT_CLIENT_PENDING;
+ tt_global_entry->flags |= TT_CLIENT_ROAM;
+ tt_global_entry->roam_at = jiffies;
+
send_roam_adv(bat_priv, tt_global_entry->addr,
tt_global_entry->orig_node);
}
@@ -694,6 +696,7 @@
const char *message, bool roaming)
{
struct tt_global_entry *tt_global_entry = NULL;
+ struct tt_local_entry *tt_local_entry = NULL;
tt_global_entry = tt_global_hash_find(bat_priv, addr);
if (!tt_global_entry)
@@ -701,15 +704,29 @@
if (tt_global_entry->orig_node == orig_node) {
if (roaming) {
- tt_global_entry->flags |= TT_CLIENT_ROAM;
- tt_global_entry->roam_at = jiffies;
- goto out;
+ /* if we are deleting a global entry due to a roam
+ * event, there are two possibilities:
+ * 1) the client roamed from node A to node B => we mark
+ * it with TT_CLIENT_ROAM, we start a timer and we
+ * wait for node B to claim it. In case of timeout
+ * the entry is purged.
+ * 2) the client roamed to us => we can directly delete
+ * the global entry, since it is useless now. */
+ tt_local_entry = tt_local_hash_find(bat_priv,
+ tt_global_entry->addr);
+ if (!tt_local_entry) {
+ tt_global_entry->flags |= TT_CLIENT_ROAM;
+ tt_global_entry->roam_at = jiffies;
+ goto out;
+ }
}
_tt_global_del(bat_priv, tt_global_entry, message);
}
out:
if (tt_global_entry)
tt_global_entry_free_ref(tt_global_entry);
+ if (tt_local_entry)
+ tt_local_entry_free_ref(tt_local_entry);
}
void tt_global_del_orig(struct bat_priv *bat_priv,
diff --git a/net/bluetooth/bnep/core.c b/net/bluetooth/bnep/core.c
index 91bcd3a..1eea820 100644
--- a/net/bluetooth/bnep/core.c
+++ b/net/bluetooth/bnep/core.c
@@ -79,17 +79,12 @@
static void __bnep_link_session(struct bnep_session *s)
{
- /* It's safe to call __module_get() here because sessions are added
- by the socket layer which has to hold the reference to this module.
- */
- __module_get(THIS_MODULE);
list_add(&s->list, &bnep_session_list);
}
static void __bnep_unlink_session(struct bnep_session *s)
{
list_del(&s->list);
- module_put(THIS_MODULE);
}
static int bnep_send(struct bnep_session *s, void *data, size_t len)
@@ -530,6 +525,7 @@
up_write(&bnep_session_sem);
free_netdev(dev);
+ module_put_and_exit(0);
return 0;
}
@@ -616,9 +612,11 @@
__bnep_link_session(s);
+ __module_get(THIS_MODULE);
s->task = kthread_run(bnep_session, s, "kbnepd %s", dev->name);
if (IS_ERR(s->task)) {
/* Session thread start failed, gotta cleanup. */
+ module_put(THIS_MODULE);
unregister_netdev(dev);
__bnep_unlink_session(s);
err = PTR_ERR(s->task);
diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c
index 7d00ddf..5a6e634 100644
--- a/net/bluetooth/cmtp/core.c
+++ b/net/bluetooth/cmtp/core.c
@@ -67,14 +67,12 @@
static void __cmtp_link_session(struct cmtp_session *session)
{
- __module_get(THIS_MODULE);
list_add(&session->list, &cmtp_session_list);
}
static void __cmtp_unlink_session(struct cmtp_session *session)
{
list_del(&session->list);
- module_put(THIS_MODULE);
}
static void __cmtp_copy_session(struct cmtp_session *session, struct cmtp_conninfo *ci)
@@ -327,6 +325,7 @@
up_write(&cmtp_session_sem);
kfree(session);
+ module_put_and_exit(0);
return 0;
}
@@ -376,9 +375,11 @@
__cmtp_link_session(session);
+ __module_get(THIS_MODULE);
session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d",
session->num);
if (IS_ERR(session->task)) {
+ module_put(THIS_MODULE);
err = PTR_ERR(session->task);
goto unlink;
}
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index d7d96b6..643a41b 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -545,7 +545,7 @@
{
hci_setup_event_mask(hdev);
- if (hdev->lmp_ver > 1)
+ if (hdev->hci_ver > 1)
hci_send_cmd(hdev, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
if (hdev->features[6] & LMP_SIMPLE_PAIR) {
diff --git a/net/ceph/crush/mapper.c b/net/ceph/crush/mapper.c
index 42599e3..3a94eae 100644
--- a/net/ceph/crush/mapper.c
+++ b/net/ceph/crush/mapper.c
@@ -477,7 +477,6 @@
int i, j;
int numrep;
int firstn;
- int rc = -1;
BUG_ON(ruleno >= map->max_rules);
@@ -491,23 +490,18 @@
* that this may or may not correspond to the specific types
* referenced by the crush rule.
*/
- if (force >= 0) {
- if (force >= map->max_devices ||
- map->device_parents[force] == 0) {
- /*dprintk("CRUSH: forcefed device dne\n");*/
- rc = -1; /* force fed device dne */
- goto out;
- }
- if (!is_out(map, weight, force, x)) {
- while (1) {
- force_context[++force_pos] = force;
- if (force >= 0)
- force = map->device_parents[force];
- else
- force = map->bucket_parents[-1-force];
- if (force == 0)
- break;
- }
+ if (force >= 0 &&
+ force < map->max_devices &&
+ map->device_parents[force] != 0 &&
+ !is_out(map, weight, force, x)) {
+ while (1) {
+ force_context[++force_pos] = force;
+ if (force >= 0)
+ force = map->device_parents[force];
+ else
+ force = map->bucket_parents[-1-force];
+ if (force == 0)
+ break;
}
}
@@ -600,10 +594,7 @@
BUG_ON(1);
}
}
- rc = result_len;
-
-out:
- return rc;
+ return result_len;
}
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 065effd..0b2e732 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -285,6 +285,8 @@
if (register_netdevice(dev) < 0)
goto failed_free;
+ strcpy(nt->parms.name, dev->name);
+
dev_hold(dev);
ipip_tunnel_link(ipn, nt);
return nt;
@@ -759,7 +761,6 @@
struct ip_tunnel *tunnel = netdev_priv(dev);
tunnel->dev = dev;
- strcpy(tunnel->parms.name, dev->name);
memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4);
memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4);
@@ -825,6 +826,7 @@
static int __net_init ipip_init_net(struct net *net)
{
struct ipip_net *ipn = net_generic(net, ipip_net_id);
+ struct ip_tunnel *t;
int err;
ipn->tunnels[0] = ipn->tunnels_wc;
@@ -848,6 +850,9 @@
if ((err = register_netdev(ipn->fb_tunnel_dev)))
goto err_reg_dev;
+ t = netdev_priv(ipn->fb_tunnel_dev);
+
+ strcpy(t->parms.name, ipn->fb_tunnel_dev->name);
return 0;
err_reg_dev:
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index cf88df8..36806de 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -1805,7 +1805,8 @@
return ERR_PTR(-EACCES);
/* Add default multicast route */
- addrconf_add_mroute(dev);
+ if (!(dev->flags & IFF_LOOPBACK))
+ addrconf_add_mroute(dev);
/* Add link local route */
addrconf_add_lroute(dev);
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 3399dd3..b582a0a 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -728,7 +728,7 @@
int attempts = !in_softirq();
if (!(rt->rt6i_flags&RTF_GATEWAY)) {
- if (rt->rt6i_dst.plen != 128 &&
+ if (ort->rt6i_dst.plen != 128 &&
ipv6_addr_equal(&ort->rt6i_dst.addr, daddr))
rt->rt6i_flags |= RTF_ANYCAST;
ipv6_addr_copy(&rt->rt6i_gateway, daddr);
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index a7a1860..96f3623 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -263,6 +263,8 @@
if (register_netdevice(dev) < 0)
goto failed_free;
+ strcpy(nt->parms.name, dev->name);
+
dev_hold(dev);
ipip6_tunnel_link(sitn, nt);
@@ -1144,7 +1146,6 @@
struct ip_tunnel *tunnel = netdev_priv(dev);
tunnel->dev = dev;
- strcpy(tunnel->parms.name, dev->name);
memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4);
memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4);
@@ -1207,6 +1208,7 @@
static int __net_init sit_init_net(struct net *net)
{
struct sit_net *sitn = net_generic(net, sit_net_id);
+ struct ip_tunnel *t;
int err;
sitn->tunnels[0] = sitn->tunnels_wc;
@@ -1231,6 +1233,9 @@
if ((err = register_netdev(sitn->fb_tunnel_dev)))
goto err_reg_dev;
+ t = netdev_priv(sitn->fb_tunnel_dev);
+
+ strcpy(t->parms.name, sitn->fb_tunnel_dev->name);
return 0;
err_reg_dev:
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c
index b064e4d..2e4b961 100644
--- a/net/mac80211/agg-tx.c
+++ b/net/mac80211/agg-tx.c
@@ -303,6 +303,38 @@
__release(agg_queue);
}
+/*
+ * splice packets from the STA's pending to the local pending,
+ * requires a call to ieee80211_agg_splice_finish later
+ */
+static void __acquires(agg_queue)
+ieee80211_agg_splice_packets(struct ieee80211_local *local,
+ struct tid_ampdu_tx *tid_tx, u16 tid)
+{
+ int queue = ieee80211_ac_from_tid(tid);
+ unsigned long flags;
+
+ ieee80211_stop_queue_agg(local, tid);
+
+ if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
+ " from the pending queue\n", tid))
+ return;
+
+ if (!skb_queue_empty(&tid_tx->pending)) {
+ spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
+ /* copy over remaining packets */
+ skb_queue_splice_tail_init(&tid_tx->pending,
+ &local->pending[queue]);
+ spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
+ }
+}
+
+static void __releases(agg_queue)
+ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
+{
+ ieee80211_wake_queue_agg(local, tid);
+}
+
void ieee80211_tx_ba_session_handle_start(struct sta_info *sta, int tid)
{
struct tid_ampdu_tx *tid_tx;
@@ -314,19 +346,17 @@
tid_tx = rcu_dereference_protected_tid_tx(sta, tid);
/*
- * While we're asking the driver about the aggregation,
- * stop the AC queue so that we don't have to worry
- * about frames that came in while we were doing that,
- * which would require us to put them to the AC pending
- * afterwards which just makes the code more complex.
+ * Start queuing up packets for this aggregation session.
+ * We're going to release them once the driver is OK with
+ * that.
*/
- ieee80211_stop_queue_agg(local, tid);
-
clear_bit(HT_AGG_STATE_WANT_START, &tid_tx->state);
/*
- * make sure no packets are being processed to get
- * valid starting sequence number
+ * Make sure no packets are being processed. This ensures that
+ * we have a valid starting sequence number and that in-flight
+ * packets have been flushed out and no packets for this TID
+ * will go into the driver during the ampdu_action call.
*/
synchronize_net();
@@ -340,17 +370,15 @@
" tid %d\n", tid);
#endif
spin_lock_bh(&sta->lock);
+ ieee80211_agg_splice_packets(local, tid_tx, tid);
ieee80211_assign_tid_tx(sta, tid, NULL);
+ ieee80211_agg_splice_finish(local, tid);
spin_unlock_bh(&sta->lock);
- ieee80211_wake_queue_agg(local, tid);
kfree_rcu(tid_tx, rcu_head);
return;
}
- /* we can take packets again now */
- ieee80211_wake_queue_agg(local, tid);
-
/* activate the timer for the recipient's addBA response */
mod_timer(&tid_tx->addba_resp_timer, jiffies + ADDBA_RESP_INTERVAL);
#ifdef CONFIG_MAC80211_HT_DEBUG
@@ -466,38 +494,6 @@
}
EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
-/*
- * splice packets from the STA's pending to the local pending,
- * requires a call to ieee80211_agg_splice_finish later
- */
-static void __acquires(agg_queue)
-ieee80211_agg_splice_packets(struct ieee80211_local *local,
- struct tid_ampdu_tx *tid_tx, u16 tid)
-{
- int queue = ieee80211_ac_from_tid(tid);
- unsigned long flags;
-
- ieee80211_stop_queue_agg(local, tid);
-
- if (WARN(!tid_tx, "TID %d gone but expected when splicing aggregates"
- " from the pending queue\n", tid))
- return;
-
- if (!skb_queue_empty(&tid_tx->pending)) {
- spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
- /* copy over remaining packets */
- skb_queue_splice_tail_init(&tid_tx->pending,
- &local->pending[queue]);
- spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
- }
-}
-
-static void __releases(agg_queue)
-ieee80211_agg_splice_finish(struct ieee80211_local *local, u16 tid)
-{
- ieee80211_wake_queue_agg(local, tid);
-}
-
static void ieee80211_agg_tx_operational(struct ieee80211_local *local,
struct sta_info *sta, u16 tid)
{
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index b9493a0..6cd8ddf 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -385,7 +385,7 @@
struct gred_sched_data *q;
if (table->tab[dp] == NULL) {
- table->tab[dp] = kzalloc(sizeof(*q), GFP_KERNEL);
+ table->tab[dp] = kzalloc(sizeof(*q), GFP_ATOMIC);
if (table->tab[dp] == NULL)
return -ENOMEM;
}
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 7d98240..c2f79e6 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -2507,6 +2507,7 @@
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1043, 0x83ce, "ASUS 1101HA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
@@ -2970,7 +2971,8 @@
/* SCH */
{ PCI_DEVICE(0x8086, 0x811b),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_SCH_SNOOP |
- AZX_DCAPS_BUFSIZE},
+ AZX_DCAPS_BUFSIZE | AZX_DCAPS_POSFIX_LPIB }, /* Poulsbo */
+ /* ICH */
{ PCI_DEVICE(0x8086, 0x2668),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH6 */
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index eeb25d52..616678f 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4929,6 +4929,12 @@
set_hp_led_gpio(codec);
return 1;
}
+ /* BIOS bug: unfilled OEM string */
+ if (strstr(dev->name, "HP_Mute_LED_P_G")) {
+ set_hp_led_gpio(codec);
+ spec->gpio_led_polarity = 1;
+ return 1;
+ }
}
/*
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
index 4584514..fa787d4 100644
--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -33,7 +33,7 @@
select SND_SOC_CX20442
select SND_SOC_DA7210 if I2C
select SND_SOC_DFBMCS320
- select SND_SOC_JZ4740_CODEC if SOC_JZ4740
+ select SND_SOC_JZ4740_CODEC
select SND_SOC_LM4857 if I2C
select SND_SOC_MAX98088 if I2C
select SND_SOC_MAX98095 if I2C
diff --git a/sound/soc/codecs/jz4740.c b/sound/soc/codecs/jz4740.c
index e373f8f..3e1f4e1 100644
--- a/sound/soc/codecs/jz4740.c
+++ b/sound/soc/codecs/jz4740.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
+#include <linux/io.h>
#include <linux/delay.h>
diff --git a/sound/soc/codecs/wm8958-dsp2.c b/sound/soc/codecs/wm8958-dsp2.c
index 0293763..5a14d5c 100644
--- a/sound/soc/codecs/wm8958-dsp2.c
+++ b/sound/soc/codecs/wm8958-dsp2.c
@@ -60,6 +60,8 @@
}
if (memcmp(fw->data, "WMFW", 4) != 0) {
+ memcpy(&data32, fw->data, sizeof(data32));
+ data32 = be32_to_cpu(data32);
dev_err(codec->dev, "%s: firmware has bad file magic %08x\n",
name, data32);
goto err;
diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c
index 645c980..a33b04d 100644
--- a/sound/soc/codecs/wm8996.c
+++ b/sound/soc/codecs/wm8996.c
@@ -1968,6 +1968,7 @@
break;
case 24576000:
ratediv = WM8996_SYSCLK_DIV;
+ wm8996->sysclk /= 2;
case 12288000:
snd_soc_update_bits(codec, WM8996_AIF_RATE,
WM8996_SYSCLK_RATE, WM8996_SYSCLK_RATE);
diff --git a/sound/soc/mxs/mxs-pcm.c b/sound/soc/mxs/mxs-pcm.c
index dea5aa4..f39d7dd 100644
--- a/sound/soc/mxs/mxs-pcm.c
+++ b/sound/soc/mxs/mxs-pcm.c
@@ -357,3 +357,6 @@
platform_driver_unregister(&mxs_pcm_driver);
}
module_exit(snd_mxs_pcm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-pcm-audio");
diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c
index 76dc74d..1ef697f 100644
--- a/sound/soc/mxs/mxs-saif.c
+++ b/sound/soc/mxs/mxs-saif.c
@@ -625,13 +625,6 @@
if (pdev->id >= ARRAY_SIZE(mxs_saif))
return -EINVAL;
- pdata = pdev->dev.platform_data;
- if (pdata && pdata->init) {
- ret = pdata->init();
- if (ret)
- return ret;
- }
-
saif = kzalloc(sizeof(*saif), GFP_KERNEL);
if (!saif)
return -ENOMEM;
@@ -639,12 +632,17 @@
mxs_saif[pdev->id] = saif;
saif->id = pdev->id;
- saif->master_id = saif->id;
- if (pdata && pdata->get_master_id) {
- saif->master_id = pdata->get_master_id(saif->id);
+ pdata = pdev->dev.platform_data;
+ if (pdata && !pdata->master_mode) {
+ saif->master_id = pdata->master_id;
if (saif->master_id < 0 ||
- saif->master_id >= ARRAY_SIZE(mxs_saif))
+ saif->master_id >= ARRAY_SIZE(mxs_saif) ||
+ saif->master_id == saif->id) {
+ dev_err(&pdev->dev, "get wrong master id\n");
return -EINVAL;
+ }
+ } else {
+ saif->master_id = saif->id;
}
saif->clk = clk_get(&pdev->dev, NULL);
diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c
index 7fbeaec..1c57f66 100644
--- a/sound/soc/mxs/mxs-sgtl5000.c
+++ b/sound/soc/mxs/mxs-sgtl5000.c
@@ -171,3 +171,4 @@
MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("MXS ALSA SoC Machine driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mxs-sgtl5000");
diff --git a/sound/soc/pxa/hx4700.c b/sound/soc/pxa/hx4700.c
index 65c1248..c664e33 100644
--- a/sound/soc/pxa/hx4700.c
+++ b/sound/soc/pxa/hx4700.c
@@ -209,9 +209,10 @@
snd_soc_card_hx4700.dev = &pdev->dev;
ret = snd_soc_register_card(&snd_soc_card_hx4700);
if (ret)
- return ret;
+ gpio_free_array(hx4700_audio_gpios,
+ ARRAY_SIZE(hx4700_audio_gpios));
- return 0;
+ return ret;
}
static int __devexit hx4700_audio_remove(struct platform_device *pdev)
diff --git a/sound/soc/samsung/jive_wm8750.c b/sound/soc/samsung/jive_wm8750.c
index 1826acf..8e523fd 100644
--- a/sound/soc/samsung/jive_wm8750.c
+++ b/sound/soc/samsung/jive_wm8750.c
@@ -101,7 +101,6 @@
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
- int err;
/* These endpoints are not being used. */
snd_soc_dapm_nc_pin(dapm, "LINPUT2");
@@ -131,7 +130,7 @@
.dai_link = &jive_dai,
.num_links = 1,
- .dapm_widgtets = wm8750_dapm_widgets,
+ .dapm_widgets = wm8750_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8750_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
diff --git a/sound/soc/samsung/smdk2443_wm9710.c b/sound/soc/samsung/smdk2443_wm9710.c
index 3a0dbfc..8bd1dc5 100644
--- a/sound/soc/samsung/smdk2443_wm9710.c
+++ b/sound/soc/samsung/smdk2443_wm9710.c
@@ -12,6 +12,7 @@
*
*/
+#include <linux/module.h>
#include <sound/soc.h>
static struct snd_soc_card smdk2443;
