Merge branch 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351 into next/dt
From Christian Daudt, DT changes for Broadcom.
* 'armsoc/for-3.12/dt' of git://github.com/broadcom/bcm11351:
ARM: DT: binding fixup to align with vendor-prefixes.txt (DT)
ARM: dts: add sdio blocks to bcm28155-ap board
ARM: dts: align sdio numbers to HW definition
ARM: bcm281xx: DT changes for reboot code
ARM: bcm281xx: Adding bcm28155-ap.dts
diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl
index 6a8b715..9c92bb8 100644
--- a/Documentation/DocBook/media_api.tmpl
+++ b/Documentation/DocBook/media_api.tmpl
@@ -1,6 +1,6 @@
<?xml version="1.0"?>
-<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
- "http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" [
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" [
<!ENTITY % media-entities SYSTEM "./media-entities.tmpl"> %media-entities;
<!ENTITY media-indices SYSTEM "./media-indices.tmpl">
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
index a1ee681..6113f92 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
@@ -4,7 +4,7 @@
Required properties :
- reg : Offset and length of the register set for the device
- - compatible : Should be "marvell,mv64xxx-i2c"
+ - compatible : Should be "marvell,mv64xxx-i2c" or "allwinner,sun4i-i2c"
- interrupts : The interrupt number
Optional properties :
diff --git a/Documentation/devicetree/bindings/media/s5p-mfc.txt b/Documentation/devicetree/bindings/media/s5p-mfc.txt
index df37b02..d75c3e5 100644
--- a/Documentation/devicetree/bindings/media/s5p-mfc.txt
+++ b/Documentation/devicetree/bindings/media/s5p-mfc.txt
@@ -15,9 +15,9 @@
mapped region.
- interrupts : MFC interrupt number to the CPU.
- - clocks : from common clock binding: handle to mfc clocks.
- - clock-names : from common clock binding: must contain "sclk_mfc" and "mfc",
- corresponding to entries in the clocks property.
+ - clocks : from common clock binding: handle to mfc clock.
+ - clock-names : from common clock binding: must contain "mfc",
+ corresponding to entry in the clocks property.
- samsung,mfc-r : Base address of the first memory bank used by MFC
for DMA contiguous memory allocation and its size.
@@ -37,8 +37,8 @@
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 170>, <&clock 273>;
- clock-names = "sclk_mfc", "mfc";
+ clocks = <&clock 273>;
+ clock-names = "mfc";
};
Board specific DT entry:
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
index e204d00..fb70856 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt
@@ -80,6 +80,17 @@
dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg,
gmh, owr, uda.
+Valid values for nvidia,functions are:
+
+ blink, cec, cldvfs, clk12, cpu, dap, dap1, dap2, dev3, displaya,
+ displaya_alt, displayb, dtv, emc_dll, extperiph1, extperiph2,
+ extperiph3, gmi, gmi_alt, hda, hsi, i2c1, i2c2, i2c3, i2c4, i2cpwr,
+ i2s0, i2s1, i2s2, i2s3, i2s4, irda, kbc, nand, nand_alt, owr, pmi,
+ pwm0, pwm1, pwm2, pwm3, pwron, reset_out_n, rsvd1, rsvd2, rsvd3,
+ rsvd4, sdmmc1, sdmmc2, sdmmc3, sdmmc4, soc, spdif, spi1, spi2, spi3,
+ spi4, spi5, spi6, sysclk, trace, uarta, uartb, uartc, uartd, ulpi,
+ usb, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6, vi, vi_alt1, vi_alt3
+
Example:
pinmux: pinmux {
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
index 683fde9..61e73cd 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
@@ -103,6 +103,17 @@
drive_gma, drive_gmb, drive_gmc, drive_gmd, drive_gme, drive_owr,
drive_uda.
+Valid values for nvidia,functions are:
+
+ ahb_clk, apb_clk, audio_sync, crt, dap1, dap2, dap3, dap4, dap5,
+ displaya, displayb, emc_test0_dll, emc_test1_dll, gmi, gmi_int,
+ hdmi, i2cp, i2c1, i2c2, i2c3, ide, irda, kbc, mio, mipi_hs, nand,
+ osc, owr, pcie, plla_out, pllc_out1, pllm_out1, pllp_out2, pllp_out3,
+ pllp_out4, pwm, pwr_intr, pwr_on, rsvd1, rsvd2, rsvd3, rsvd4, rtck,
+ sdio1, sdio2, sdio3, sdio4, sflash, spdif, spi1, spi2, spi2_alt,
+ spi3, spi4, trace, twc, uarta, uartb, uartc, uartd, uarte, ulpi,
+ vi, vi_sensor_clk, xio
+
Example:
pinctrl@70000000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
index 6f426ed..0e6354c 100644
--- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
+++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra30-pinmux.txt
@@ -91,6 +91,18 @@
gmh, gpv, lcd1, lcd2, owr, sdio1, sdio2, sdio3, spi, uaa, uab, uart2,
uart3, uda, vi1.
+Valid values for nvidia,functions are:
+
+ blink, cec, clk_12m_out, clk_32k_in, core_pwr_req, cpu_pwr_req, crt,
+ dap, ddr, dev3, displaya, displayb, dtv, extperiph1, extperiph2,
+ extperiph3, gmi, gmi_alt, hda, hdcp, hdmi, hsi, i2c1, i2c2, i2c3,
+ i2c4, i2cpwr, i2s0, i2s1, i2s2, i2s3, i2s4, invalid, kbc, mio, nand,
+ nand_alt, owr, pcie, pwm0, pwm1, pwm2, pwm3, pwr_int_n, rsvd1, rsvd2,
+ rsvd3, rsvd4, rtck, sata, sdmmc1, sdmmc2, sdmmc3, sdmmc4, spdif, spi1,
+ spi2, spi2_alt, spi3, spi4, spi5, spi6, sysclk, test, trace, uarta,
+ uartb, uartc, uartd, uarte, ulpi, vgp1, vgp2, vgp3, vgp4, vgp5, vgp6,
+ vi, vi_alt1, vi_alt2, vi_alt3
+
Example:
pinctrl@70000000 {
diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
index 9a2f3f4..6b33b9f 100644
--- a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
+++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt
@@ -1,8 +1,8 @@
ST Ericsson Nomadik pinmux controller
Required properties:
-- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540",
- "stericsson,nmk-pinctrl-stn8815"
+- compatible: "stericsson,db8500-pinctrl", "stericsson,db8540-pinctrl",
+ "stericsson,stn8815-pinctrl"
- reg: Should contain the register physical address and length of the PRCMU.
Please refer to pinctrl-bindings.txt in this directory for details of the
@@ -68,7 +68,7 @@
Example board file extract:
pinctrl@80157000 {
- compatible = "stericsson,nmk-pinctrl";
+ compatible = "stericsson,db8500-pinctrl";
reg = <0x80157000 0x2000>;
pinctrl-names = "default";
diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
index d5a3086..30b0581 100644
--- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
+++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt
@@ -31,9 +31,8 @@
Optional sub-node properties:
ti,warm-reset - maintain voltage during warm reset(boolean)
ti,roof-floor - control voltage selection by pin(boolean)
- ti,sleep-mode - mode to adopt in pmic sleep 0 - off, 1 - auto,
+ ti,mode-sleep - mode to adopt in pmic sleep 0 - off, 1 - auto,
2 - eco, 3 - forced pwm
- ti,tstep - slope control 0 - Jump, 1 10mV/us, 2 5mV/us, 3 2.5mV/us
ti,smps-range - OTP has the wrong range set for the hardware so override
0 - low range, 1 - high range.
@@ -59,7 +58,6 @@
ti,warm-reset;
ti,roof-floor;
ti,mode-sleep = <0>;
- ti,tstep = <0>;
ti,smps-range = <1>;
};
diff --git a/MAINTAINERS b/MAINTAINERS
index defc053..7cacc88 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -965,6 +965,12 @@
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
+ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
+M: Santosh Shilimkar <santosh.shilimkar@ti.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/mach-keystone/
+
ARM/LOGICPD PXA270 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1259,7 +1265,6 @@
T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git
ARM/Ux500 ARM ARCHITECTURE
-M: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
@@ -8664,6 +8669,11 @@
S: Maintained
F: sound/usb/midi.*
+USB NETWORKING DRIVERS
+L: linux-usb@vger.kernel.org
+S: Odd Fixes
+F: drivers/net/usb/
+
USB OHCI DRIVER
M: Alan Stern <stern@rowland.harvard.edu>
L: linux-usb@vger.kernel.org
diff --git a/Makefile b/Makefile
index f93d4f7..6e48848 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 11
SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
NAME = Linux for Workgroups
# *DOCUMENTATION*
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 6fd2cea..a37a50f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -190,6 +190,7 @@
machine-$(CONFIG_ARCH_SA1100) += sa1100
machine-$(CONFIG_ARCH_SHARK) += shark
machine-$(CONFIG_ARCH_SHMOBILE) += shmobile
+machine-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile
machine-$(CONFIG_ARCH_SIRF) += prima2
machine-$(CONFIG_ARCH_SOCFPGA) += socfpga
machine-$(CONFIG_ARCH_STI) += sti
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d56b88b..454288d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -54,13 +54,14 @@
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
exynos4412-odroidx.dtb \
- exynos4412-smdk4412.dtb \
exynos4412-origen.dtb \
+ exynos4412-smdk4412.dtb \
+ exynos4412-trats2.dtb \
exynos5250-arndale.dtb \
- exynos5440-sd5v1.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
exynos5420-smdk5420.dtb \
+ exynos5440-sd5v1.dtb \
exynos5440-ssdk5440.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
@@ -144,7 +145,9 @@
imx28-cfa10037.dtb \
imx28-cfa10049.dtb \
imx28-cfa10055.dtb \
+ imx28-cfa10056.dtb \
imx28-cfa10057.dtb \
+ imx28-cfa10058.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-sps1.dtb \
@@ -177,13 +180,14 @@
am43x-epos-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-dtb-$(CONFIG_ARCH_U8500) += snowball.dtb \
- hrefprev60.dtb \
- hrefv60plus.dtb \
- ccu8540.dtb \
- ccu9540.dtb
+dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
+ ste-hrefprev60.dtb \
+ ste-hrefv60plus.dtb \
+ ste-ccu8540.dtb \
+ ste-ccu9540.dtb
dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb
dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \
+ emev2-kzm9d-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7740-armadillo800eva-reference.dtb \
@@ -193,6 +197,7 @@
sh73a0-kzm9g-reference.dtb \
r8a73a4-ape6evm.dtb \
sh7372-mackerel.dtb
+dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d-reference.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_cyclone5.dtb \
socfpga_vt.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
@@ -207,11 +212,14 @@
stih415-b2020.dtb \
stih416-b2020.dtb
dtb-$(CONFIG_ARCH_SUNXI) += \
+ sun4i-a10-a1000.dtb \
sun4i-a10-cubieboard.dtb \
sun4i-a10-mini-xplus.dtb \
sun4i-a10-hackberry.dtb \
sun5i-a10s-olinuxino-micro.dtb \
- sun5i-a13-olinuxino.dtb
+ sun5i-a13-olinuxino.dtb \
+ sun6i-a31-colombus.dtb \
+ sun7i-a20-olinuxino-micro.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
@@ -225,8 +233,7 @@
tegra30-beaver.dtb \
tegra30-cardhu-a02.dtb \
tegra30-cardhu-a04.dtb \
- tegra114-dalmore.dtb \
- tegra114-pluto.dtb
+ tegra114-dalmore.dtb
dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \
versatile-pb.dtb
dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 92b9e21..f770655 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -120,6 +120,7 @@
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91rm9200_pqfp.dtsi b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
new file mode 100644
index 0000000..93ca66f
--- /dev/null
+++ b/arch/arm/boot/dts/at91rm9200_pqfp.dtsi
@@ -0,0 +1,17 @@
+/*
+ * at91rm9200_pqfp.dtsi - Device Tree Include file for AT91RM9200 PQFP family SoC
+ *
+ * Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include "at91rm9200.dtsi"
+
+/ {
+ compatible = "atmel,at91rm9200-pqfp", "atmel,at91rm9200";
+};
+
+&pioD {
+ status = "disabled";
+};
diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi
index c7ccbcb..56ee828 100644
--- a/arch/arm/boot/dts/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/at91sam9260.dtsi
@@ -572,6 +572,7 @@
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index bb7f564..9fb7ffd 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -291,6 +291,22 @@
};
};
+ i2c0 {
+ pinctrl_i2c0: i2c0-0 {
+ atmel,pins =
+ <AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE
+ AT91_PIOA 31 AT91_PERIPH_A AT91_PINCTRL_NONE>;
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1: i2c1-0 {
+ atmel,pins =
+ <AT91_PIOC 0 AT91_PERIPH_C AT91_PINCTRL_NONE
+ AT91_PIOC 1 AT91_PERIPH_C AT91_PINCTRL_NONE>;
+ };
+ };
+
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 24 AT91_PERIPH_A AT91_PINCTRL_NONE>;
@@ -471,6 +487,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
status = "disabled";
};
@@ -483,6 +501,8 @@
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d59b70c..3e86b05 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -40,6 +40,15 @@
i2c0: i2c@f8010000 {
status = "okay";
+
+ qt1070: keyboard@1b {
+ compatible = "qt1070";
+ reg = <0x1b>;
+ interrupt-parent = <&pioA>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_qt1070_irq>;
+ };
};
i2c1: i2c@f8014000 {
@@ -66,6 +75,13 @@
<AT91_PIOA 7 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PA7 gpio CD pin pull up and deglitch */
};
};
+
+ qt1070 {
+ pinctrl_qt1070_irq: qt1070_irq {
+ atmel,pins =
+ <AT91_PIOA 2 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
+ };
+ };
};
spi0: spi@f0000000 {
@@ -121,7 +137,7 @@
enter {
label = "Enter";
- gpios = <&pioB 4 GPIO_ACTIVE_LOW>;
+ gpios = <&pioB 3 GPIO_ACTIVE_LOW>;
linux,code = <28>;
gpio-key,wakeup;
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 57d45f5..cf78ac0 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -542,6 +542,9 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 IRQ_TYPE_LEVEL_HIGH 5>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(13)>,
+ <&dma0 1 AT91_DMA_CFG_PER_ID(14)>;
+ dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
diff --git a/arch/arm/boot/dts/at91sam9x5ek.dtsi b/arch/arm/boot/dts/at91sam9x5ek.dtsi
index b753855..5c40422 100644
--- a/arch/arm/boot/dts/at91sam9x5ek.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5ek.dtsi
@@ -59,6 +59,11 @@
i2c0: i2c@f8010000 {
status = "okay";
+
+ wm8731: wm8731@1a {
+ compatible = "wm8731";
+ reg = <0x1a>;
+ };
};
pinctrl@fffff400 {
@@ -90,6 +95,10 @@
watchdog@fffffe40 {
status = "okay";
};
+
+ ssc0: ssc@f0010000 {
+ status = "okay";
+ };
};
usb0: ohci@00600000 {
@@ -104,4 +113,19 @@
status = "okay";
};
};
+
+ sound {
+ compatible = "atmel,sam9x5-wm8731-audio";
+
+ atmel,model = "wm8731 @ AT91SAM9X5EK";
+
+ atmel,audio-routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line In Jack",
+ "RLINEIN", "Line In Jack";
+
+ atmel,ssc-controller = <&ssc0>;
+ atmel,audio-codec = <&wm8731>;
+ };
};
diff --git a/arch/arm/boot/dts/ccu8540.dts b/arch/arm/boot/dts/ccu8540.dts
deleted file mode 100644
index 48ff034..0000000
--- a/arch/arm/boot/dts/ccu8540.dts
+++ /dev/null
@@ -1,41 +0,0 @@
-/*
- * Copyright 2013 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "dbx5x0.dtsi"
-
-/ {
- model = "ST-Ericsson U8540 platform with Device Tree";
- compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
-
- memory@0 {
- reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
- };
-
- soc {
- prcmu@80157000 {
- reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
- reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
- };
-
- uart@80120000 {
- status = "okay";
- };
-
- uart@80121000 {
- status = "okay";
- };
-
- uart@80007000 {
- status = "okay";
- };
- };
-};
diff --git a/arch/arm/boot/dts/emev2-kzm9d-reference.dts b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
new file mode 100644
index 0000000..bed676b
--- /dev/null
+++ b/arch/arm/boot/dts/emev2-kzm9d-reference.dts
@@ -0,0 +1,57 @@
+/*
+ * Device Tree Source for the KZM9D board
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+/dts-v1/;
+
+/include/ "emev2.dtsi"
+
+/ {
+ model = "EMEV2 KZM9D Board";
+ compatible = "renesas,kzm9d-reference", "renesas,emev2";
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x8000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+ };
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lan9220@20000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x20000000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio0>;
+ interrupts = <1 1>; /* active high */
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
+};
diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts
index b9b3241..dda13bc 100644
--- a/arch/arm/boot/dts/emev2-kzm9d.dts
+++ b/arch/arm/boot/dts/emev2-kzm9d.dts
@@ -21,6 +21,6 @@
};
chosen {
- bootargs = "console=tty0 console=ttyS1,115200n81 earlyprintk=serial8250-em.1,115200n81 mem=128M@0x40000000 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
+ bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096";
};
};
diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi
index c8a8c08..99ad2b2 100644
--- a/arch/arm/boot/dts/emev2.dtsi
+++ b/arch/arm/boot/dts/emev2.dtsi
@@ -14,6 +14,14 @@
compatible = "renesas,emev2";
interrupt-parent = <&gic>;
+ aliases {
+ gpio0 = &gpio0;
+ gpio1 = &gpio1;
+ gpio2 = &gpio2;
+ gpio3 = &gpio3;
+ gpio4 = &gpio4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -67,4 +75,55 @@
reg = <0xe1050000 0x38>;
interrupts = <0 11 0>;
};
+
+ gpio0: gpio@e0050000 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050000 0x2c>, <0xe0050040 0x20>;
+ interrupts = <0 67 0>, <0 68 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio1: gpio@e0050080 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>;
+ interrupts = <0 69 0>, <0 70 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio2: gpio@e0050100 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050100 0x2c>, <0xe0050140 0x20>;
+ interrupts = <0 71 0>, <0 72 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio3: gpio@e0050180 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>;
+ interrupts = <0 73 0>, <0 74 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <32>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ gpio4: gpio@e0050200 {
+ compatible = "renesas,em-gio";
+ reg = <0xe0050200 0x2c>, <0xe0050240 0x20>;
+ interrupts = <0 75 0>, <0 76 0>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ ngpios = <31>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi
index 3f94fe8..93c2501 100644
--- a/arch/arm/boot/dts/exynos4.dtsi
+++ b/arch/arm/boot/dts/exynos4.dtsi
@@ -36,6 +36,12 @@
i2c5 = &i2c_5;
i2c6 = &i2c_6;
i2c7 = &i2c_7;
+ csis0 = &csis_0;
+ csis1 = &csis_1;
+ fimc0 = &fimc_0;
+ fimc1 = &fimc_1;
+ fimc2 = &fimc_2;
+ fimc3 = &fimc_3;
};
chipid@10000000 {
@@ -92,6 +98,88 @@
reg = <0x10010000 0x400>;
};
+ camera {
+ compatible = "samsung,fimc", "simple-bus";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clock_cam: clock-controller {
+ #clock-cells = <1>;
+ };
+
+ fimc_0: fimc@11800000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11800000 0x1000>;
+ interrupts = <0 84 0>;
+ clocks = <&clock 256>, <&clock 128>;
+ clock-names = "fimc", "sclk_fimc";
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_1: fimc@11810000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11810000 0x1000>;
+ interrupts = <0 85 0>;
+ clocks = <&clock 257>, <&clock 129>;
+ clock-names = "fimc", "sclk_fimc";
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_2: fimc@11820000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11820000 0x1000>;
+ interrupts = <0 86 0>;
+ clocks = <&clock 258>, <&clock 130>;
+ clock-names = "fimc", "sclk_fimc";
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ fimc_3: fimc@11830000 {
+ compatible = "samsung,exynos4210-fimc";
+ reg = <0x11830000 0x1000>;
+ interrupts = <0 87 0>;
+ clocks = <&clock 259>, <&clock 131>;
+ clock-names = "fimc", "sclk_fimc";
+ samsung,power-domain = <&pd_cam>;
+ samsung,sysreg = <&sys_reg>;
+ status = "disabled";
+ };
+
+ csis_0: csis@11880000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11880000 0x4000>;
+ interrupts = <0 78 0>;
+ clocks = <&clock 260>, <&clock 134>;
+ clock-names = "csis", "sclk_csis";
+ bus-width = <4>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ csis_1: csis@11890000 {
+ compatible = "samsung,exynos4210-csis";
+ reg = <0x11890000 0x4000>;
+ interrupts = <0 80 0>;
+ clocks = <&clock 261>, <&clock 135>;
+ clock-names = "csis", "sclk_csis";
+ bus-width = <2>;
+ samsung,power-domain = <&pd_cam>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
watchdog@10060000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x10060000 0x100>;
@@ -155,13 +243,31 @@
status = "disabled";
};
+ ehci@12580000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12580000 0x100>;
+ interrupts = <0 70 0>;
+ clocks = <&clock 304>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ ohci@12590000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12590000 0x100>;
+ interrupts = <0 70 0>;
+ clocks = <&clock 304>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
mfc: codec@13400000 {
compatible = "samsung,mfc-v5";
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock 170>, <&clock 273>;
- clock-names = "sclk_mfc", "mfc";
+ clocks = <&clock 273>;
+ clock-names = "mfc";
status = "disabled";
};
@@ -297,8 +403,8 @@
compatible = "samsung,exynos4210-spi";
reg = <0x13920000 0x100>;
interrupts = <0 66 0>;
- tx-dma-channel = <&pdma0 7>; /* preliminary */
- rx-dma-channel = <&pdma0 6>; /* preliminary */
+ dmas = <&pdma0 7>, <&pdma0 6>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 327>, <&clock 159>;
@@ -312,8 +418,8 @@
compatible = "samsung,exynos4210-spi";
reg = <0x13930000 0x100>;
interrupts = <0 67 0>;
- tx-dma-channel = <&pdma1 7>; /* preliminary */
- rx-dma-channel = <&pdma1 6>; /* preliminary */
+ dmas = <&pdma1 7>, <&pdma1 6>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 328>, <&clock 160>;
@@ -327,8 +433,8 @@
compatible = "samsung,exynos4210-spi";
reg = <0x13940000 0x100>;
interrupts = <0 68 0>;
- tx-dma-channel = <&pdma0 9>; /* preliminary */
- rx-dma-channel = <&pdma0 8>; /* preliminary */
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clock 329>, <&clock 161>;
diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
index 553bcea..a7c2128 100644
--- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi
@@ -797,6 +797,29 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ cam_port_a_io: cam-port-a-io {
+ samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
+ "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
+ "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a_clk_active: cam-port-a-clk-active {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_a_clk_idle: cam-port-a-clk-idle {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 94eebff..1c164f2 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -30,13 +30,62 @@
bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
};
- vemmc_reg: voltage-regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
- enable-active-high;
+ regulators {
+ compatible = "simple-bus";
+
+ vemmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ tsp_reg: regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "TSP_FIXED_VOLTAGES";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpl0 3 0>;
+ enable-active-high;
+ };
+
+ cam_af_28v_reg: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "8M_AF_2.8V_EN";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk1 1 0>;
+ enable-active-high;
+ };
+
+ cam_io_en_reg: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_IO_EN";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpe2 1 0>;
+ enable-active-high;
+ };
+
+ cam_io_12v_reg: regulator-4 {
+ compatible = "regulator-fixed";
+ regulator-name = "8M_1.2V_EN";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ gpio = <&gpe2 5 0>;
+ enable-active-high;
+ };
+
+ vt_core_15v_reg: regulator-5 {
+ compatible = "regulator-fixed";
+ regulator-name = "VT_CORE_1.5V";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpe2 2 0>;
+ enable-active-high;
+ };
};
sdhci_emmc: sdhci@12510000 {
@@ -97,15 +146,6 @@
};
};
- tsp_reg: voltage-regulator {
- compatible = "regulator-fixed";
- regulator-name = "TSP_FIXED_VOLTAGES";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpl0 3 0>;
- enable-active-high;
- };
-
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@@ -218,6 +258,12 @@
regulator-always-on;
};
+ vtcam_reg: LDO12 {
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vcclcd_reg: LDO13 {
regulator-name = "VCC_3.3V_LCD";
regulator-min-microvolt = <3300000>;
@@ -301,4 +347,26 @@
clock-frequency = <24000000>;
};
};
+
+ camera {
+ pinctrl-names = "default";
+ pinctrl-0 = <>;
+ status = "okay";
+
+ fimc_0: fimc@11800000 {
+ status = "okay";
+ };
+
+ fimc_1: fimc@11810000 {
+ status = "okay";
+ };
+
+ fimc_2: fimc@11820000 {
+ status = "okay";
+ };
+
+ fimc_3: fimc@11830000 {
+ status = "okay";
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index b7f358a..ef8c2a5 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -125,4 +125,34 @@
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
+
+ camera {
+ clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+ fimc_0: fimc@11800000 {
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,cam-if;
+ };
+
+ fimc_1: fimc@11810000 {
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,cam-if;
+ };
+
+ fimc_2: fimc@11820000 {
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,lcd-wb;
+ };
+
+ fimc_3: fimc@11830000 {
+ samsung,pix-limits = <1920 8192 1366 1920>;
+ samsung,rotators = <0>;
+ samsung,mainscaler-ext;
+ samsung,lcd-wb;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index 7993641..8768b03 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -27,6 +27,11 @@
bootargs ="console=ttySAC2,115200";
};
+ firmware@0203F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0203F000 0x1000>;
+ };
+
mmc_reg: voltage-regulator {
compatible = "regulator-fixed";
regulator-name = "VMEM_VDD_2.8V";
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
new file mode 100644
index 0000000..fb7b9ae
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -0,0 +1,579 @@
+/*
+ * Samsung's Exynos4412 based Trats 2 board device tree source
+ *
+ * Copyright (c) 2013 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Trats 2 board which is based on
+ * Samsung's Exynos4412 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos4412.dtsi"
+
+/ {
+ model = "Samsung Trats 2 based on Exynos4412";
+ compatible = "samsung,trats2", "samsung,exynos4412";
+
+ aliases {
+ i2c8 = &i2c_ak8975;
+ };
+
+ memory {
+ reg = <0x40000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5";
+ };
+
+ firmware@0204F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0204F000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ xusbxti {
+ compatible = "samsung,clock-xusbxti", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vemmc_reg: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ cam_io_reg: voltage-regulator-1 {
+ compatible = "regulator-fixed";
+ regulator-name = "CAM_SENSOR_A";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpm0 2 0>;
+ enable-active-high;
+ };
+
+ /* More to come */
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ key-down {
+ interrupt-parent = <&gpj1>;
+ interrupts = <2 0>;
+ gpios = <&gpj1 2 1>;
+ linux,code = <114>;
+ label = "volume down";
+ debounce-interval = <10>;
+ };
+
+ key-up {
+ interrupt-parent = <&gpj1>;
+ interrupts = <1 0>;
+ gpios = <&gpj1 1 1>;
+ linux,code = <115>;
+ label = "volume up";
+ debounce-interval = <10>;
+ };
+
+ key-power {
+ interrupt-parent = <&gpx2>;
+ interrupts = <7 0>;
+ gpios = <&gpx2 7 1>;
+ linux,code = <116>;
+ label = "power";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c@13890000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ pinctrl-0 = <&i2c3_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ mms114-touchscreen@48 {
+ compatible = "melfas,mms114";
+ reg = <0x48>;
+ interrupt-parent = <&gpm2>;
+ interrupts = <3 2>;
+ x-size = <720>;
+ y-size = <1280>;
+ avdd-supply = <&ldo23_reg>;
+ vdd-supply = <&ldo24_reg>;
+ };
+ };
+
+ i2c@138D0000 {
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ pinctrl-0 = <&i2c7_bus>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ max77686_pmic@09 {
+ compatible = "maxim,max77686";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x09>;
+
+ voltage-regulators {
+ ldo1_reg: ldo1 {
+ regulator-compatible = "LDO1";
+ regulator-name = "VALIVE_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-compatible = "LDO2";
+ regulator-name = "VM1M2_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-compatible = "LDO3";
+ regulator-name = "VCC_1.8V_AP";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-compatible = "LDO4";
+ regulator-name = "VCC_2.8V_AP";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo5_reg: ldo5 {
+ regulator-compatible = "LDO5";
+ regulator-name = "VCC_1.8V_IO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo6_reg: ldo6 {
+ regulator-compatible = "LDO6";
+ regulator-name = "VMPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo7_reg: ldo7 {
+ regulator-compatible = "LDO7";
+ regulator-name = "VPLL_1.0V_AP";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-mem-on;
+ };
+
+ ldo8_reg: ldo8 {
+ regulator-compatible = "LDO8";
+ regulator-name = "VMIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-mem-off;
+ };
+
+ ldo9_reg: ldo9 {
+ regulator-compatible = "LDO9";
+ regulator-name = "CAM_ISP_MIPI_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-idle;
+ };
+
+ ldo10_reg: ldo10 {
+ regulator-compatible = "LDO10";
+ regulator-name = "VMIPI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-off;
+ };
+
+ ldo11_reg: ldo11 {
+ regulator-compatible = "LDO11";
+ regulator-name = "VABB1_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo12_reg: ldo12 {
+ regulator-compatible = "LDO12";
+ regulator-name = "VUOTG_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-mem-off;
+ };
+
+ ldo13_reg: ldo13 {
+ regulator-compatible = "LDO13";
+ regulator-name = "NFC_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo14_reg: ldo14 {
+ regulator-compatible = "LDO14";
+ regulator-name = "VABB2_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo15_reg: ldo15 {
+ regulator-compatible = "LDO15";
+ regulator-name = "VHSIC_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-mem-off;
+ };
+
+ ldo16_reg: ldo16 {
+ regulator-compatible = "LDO16";
+ regulator-name = "VHSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-off;
+ };
+
+ ldo17_reg: ldo17 {
+ regulator-compatible = "LDO17";
+ regulator-name = "CAM_SENSOR_CORE_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-idle;
+ };
+
+ ldo18_reg: ldo18 {
+ regulator-compatible = "LDO18";
+ regulator-name = "CAM_ISP_SEN_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo19_reg: ldo19 {
+ regulator-compatible = "LDO19";
+ regulator-name = "VT_CAM_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo20_reg: ldo20 {
+ regulator-compatible = "LDO20";
+ regulator-name = "VDDQ_PRE_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo21_reg: ldo21 {
+ regulator-compatible = "LDO21";
+ regulator-name = "VTF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-mem-idle;
+ };
+
+ ldo22_reg: ldo22 {
+ regulator-compatible = "LDO22";
+ regulator-name = "VMEM_VDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ ldo23_reg: ldo23 {
+ regulator-compatible = "LDO23";
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-mem-idle;
+ };
+
+ ldo24_reg: ldo24 {
+ regulator-compatible = "LDO24";
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-mem-idle;
+ };
+
+ ldo25_reg: ldo25 {
+ regulator-compatible = "LDO25";
+ regulator-name = "LCD_VCC_3.3V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-mem-idle;
+ };
+
+ ldo26_reg: ldo26 {
+ regulator-compatible = "LDO26";
+ regulator-name = "MOTOR_VCC_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-mem-idle;
+ };
+
+ buck1_reg: buck1 {
+ regulator-compatible = "BUCK1";
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck2_reg: buck2 {
+ regulator-compatible = "BUCK2";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck3_reg: buck3 {
+ regulator-compatible = "BUCK3";
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck4_reg: buck4 {
+ regulator-compatible = "BUCK4";
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-boot-on;
+ regulator-mem-off;
+ };
+
+ buck5_reg: buck5 {
+ regulator-compatible = "BUCK5";
+ regulator-name = "VMEM_1.2V_AP";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ buck6_reg: buck6 {
+ regulator-compatible = "BUCK6";
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck7_reg: buck7 {
+ regulator-compatible = "BUCK7";
+ regulator-name = "VCC_SUB_2.0V";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-always-on;
+ };
+
+ buck8_reg: buck8 {
+ regulator-compatible = "BUCK8";
+ regulator-name = "VMEM_VDDF_3.0V";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-mem-off;
+ };
+
+ buck9_reg: buck9 {
+ regulator-compatible = "BUCK9";
+ regulator-name = "CAM_ISP_CORE_1.2V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-mem-off;
+ };
+ };
+ };
+ };
+
+ sdhci@12510000 {
+ bus-width = <8>;
+ non-removable;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+ pinctrl-names = "default";
+ vmmc-supply = <&vemmc_reg>;
+ status = "okay";
+ };
+
+ serial@13800000 {
+ status = "okay";
+ };
+
+ serial@13810000 {
+ status = "okay";
+ };
+
+ serial@13820000 {
+ status = "okay";
+ };
+
+ serial@13830000 {
+ status = "okay";
+ };
+
+ i2c_ak8975: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpy2 4 0>, <&gpy2 5 0>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ak8975@0c {
+ compatible = "ak,ak8975";
+ reg = <0x0c>;
+ gpios = <&gpj0 7 0>;
+ };
+ };
+
+ spi_1: spi@13930000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ status = "okay";
+
+ s5c73m3_spi: s5c73m3 {
+ compatible = "samsung,s5c73m3";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+ controller-data {
+ cs-gpio = <&gpb 5 0>;
+ samsung,spi-feedback-delay = <2>;
+ };
+ };
+ };
+
+ camera {
+ pinctrl-0 = <&cam_port_b_clk_active>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ fimc_0: fimc@11800000 {
+ status = "okay";
+ };
+
+ fimc_1: fimc@11810000 {
+ status = "okay";
+ };
+
+ fimc_2: fimc@11820000 {
+ status = "okay";
+ };
+
+ fimc_3: fimc@11830000 {
+ status = "okay";
+ };
+
+ csis_1: csis@11890000 {
+ vddcore-supply = <&ldo8_reg>;
+ vddio-supply = <&ldo10_reg>;
+ clock-frequency = <160000000>;
+ status = "okay";
+
+ /* Camera D (4) MIPI CSI-2 (CSIS1) */
+ port@4 {
+ reg = <4>;
+ csis1_ep: endpoint {
+ remote-endpoint = <&is_s5k6a3_ep>;
+ data-lanes = <1>;
+ samsung,csis-hs-settle = <18>;
+ samsung,csis-wclk;
+ };
+ };
+ };
+
+ fimc_lite_0: fimc-lite@12390000 {
+ status = "okay";
+ };
+
+ fimc_lite_1: fimc-lite@123A0000 {
+ status = "okay";
+ };
+
+ fimc-is@12000000 {
+ pinctrl-0 = <&fimc_is_uart>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ i2c1_isp: i2c-isp@12140000 {
+ pinctrl-0 = <&fimc_is_i2c1>;
+ pinctrl-names = "default";
+
+ s5k6a3@10 {
+ compatible = "samsung,s5k6a3";
+ reg = <0x10>;
+ svdda-supply = <&cam_io_reg>;
+ svddio-supply = <&ldo19_reg>;
+ clock-frequency = <24000000>;
+ /* CAM_B_CLKOUT */
+ clocks = <&clock_cam 1>;
+ clock-names = "mclk";
+ samsung,camclk-out = <1>;
+ gpios = <&gpm1 6 0>;
+
+ port {
+ is_s5k6a3_ep: endpoint {
+ remote-endpoint = <&csis1_ep>;
+ data-lanes = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
index 704290f..99b26df 100644
--- a/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos4x12-pinctrl.dtsi
@@ -401,13 +401,26 @@
samsung,pin-drv = <0>;
};
- cam_port_a: cam-port-a {
+ cam_port_a_io: cam-port-a-io {
samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3",
"gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7",
- "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-3",
- "gpj1-4";
+ "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4";
samsung,pin-function = <2>;
- samsung,pin-pud = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_a_clk_active: cam-port-a-clk-active {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_a_clk_idle: cam-port-a-clk-idle {
+ samsung,pins = "gpj1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
samsung,pin-drv = <0>;
};
};
@@ -778,16 +791,29 @@
samsung,pin-drv = <3>;
};
- cam_port_b: cam-port-b {
+ cam_port_b_io: cam-port-b-io {
samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
"gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
- "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1",
- "gpm2-2";
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
samsung,pin-function = <3>;
samsung,pin-pud = <3>;
samsung,pin-drv = <0>;
};
+ cam_port_b_clk_active: cam-port-b-clk-active {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_clk_idle: cam-port-b-clk-idle {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
eint0: ext-int0 {
samsung,pins = "gpx0-0";
samsung,pin-function = <0xf>;
@@ -822,6 +848,27 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ fimc_is_i2c0: fimc-is-i2c0 {
+ samsung,pins = "gpm4-0", "gpm4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_i2c1: fimc-is-i2c1 {
+ samsung,pins = "gpm4-2", "gpm4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_uart: fimc-is-uart {
+ samsung,pins = "gpm3-5", "gpm3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@03860000 {
diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi
index 01da194..954628c 100644
--- a/arch/arm/boot/dts/exynos4x12.dtsi
+++ b/arch/arm/boot/dts/exynos4x12.dtsi
@@ -26,6 +26,13 @@
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
+ fimc-lite0 = &fimc_lite_0;
+ fimc-lite1 = &fimc_lite_1;
+ };
+
+ pd_isp: isp-power-domain@10023CA0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10023CA0 0x20>;
};
clock: clock-controller@0x10030000 {
@@ -73,4 +80,100 @@
clock-names = "sclk_fimg2d", "fimg2d";
status = "disabled";
};
+
+ camera {
+ clocks = <&clock 132>, <&clock 133>, <&clock 351>, <&clock 352>;
+ clock-names = "sclk_cam0", "sclk_cam1", "pxl_async0", "pxl_async1";
+
+ fimc_0: fimc@11800000 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+ };
+
+ fimc_1: fimc@11810000 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,cam-if;
+ };
+
+ fimc_2: fimc@11820000 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <4224 8192 1920 4224>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+ samsung,cam-if;
+ };
+
+ fimc_3: fimc@11830000 {
+ compatible = "samsung,exynos4212-fimc";
+ samsung,pix-limits = <1920 8192 1366 1920>;
+ samsung,rotators = <0>;
+ samsung,mainscaler-ext;
+ samsung,isp-wb;
+ samsung,lcd-wb;
+ };
+
+ fimc_lite_0: fimc-lite@12390000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x12390000 0x1000>;
+ interrupts = <0 105 0>;
+ samsung,power-domain = <&pd_isp>;
+ clocks = <&clock 353>;
+ clock-names = "flite";
+ status = "disabled";
+ };
+
+ fimc_lite_1: fimc-lite@123A0000 {
+ compatible = "samsung,exynos4212-fimc-lite";
+ reg = <0x123A0000 0x1000>;
+ interrupts = <0 106 0>;
+ samsung,power-domain = <&pd_isp>;
+ clocks = <&clock 354>;
+ clock-names = "flite";
+ status = "disabled";
+ };
+
+ fimc_is: fimc-is@12000000 {
+ compatible = "samsung,exynos4212-fimc-is", "simple-bus";
+ reg = <0x12000000 0x260000>;
+ interrupts = <0 90 0>, <0 95 0>;
+ samsung,power-domain = <&pd_isp>;
+ clocks = <&clock 353>, <&clock 354>, <&clock 355>,
+ <&clock 356>, <&clock 17>, <&clock 357>,
+ <&clock 358>, <&clock 359>, <&clock 360>,
+ <&clock 450>,<&clock 451>, <&clock 452>,
+ <&clock 453>, <&clock 176>, <&clock 13>,
+ <&clock 454>, <&clock 395>, <&clock 455>;
+ clock-names = "lite0", "lite1", "ppmuispx",
+ "ppmuispmx", "mpll", "isp",
+ "drc", "fd", "mcuisp",
+ "ispdiv0", "ispdiv1", "mcuispdiv0",
+ "mcuispdiv1", "uart", "aclk200",
+ "div_aclk200", "aclk400mcuisp",
+ "div_aclk400mcuisp";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ status = "disabled";
+
+ pmu {
+ reg = <0x10020000 0x3000>;
+ };
+
+ i2c1_isp: i2c-isp@12140000 {
+ compatible = "samsung,exynos4212-i2c-isp";
+ reg = <0x12140000 0x100>;
+ clocks = <&clock 370>;
+ clock-names = "i2c_isp";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+ };
};
diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi
index f65e124..6afa57d 100644
--- a/arch/arm/boot/dts/exynos5.dtsi
+++ b/arch/arm/boot/dts/exynos5.dtsi
@@ -108,4 +108,23 @@
interrupts = <0 42 0>;
status = "disabled";
};
+
+ fimd@14400000 {
+ compatible = "samsung,exynos5250-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x14400000 0x40000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <18 4>, <18 5>, <18 6>;
+ status = "disabled";
+ };
+
+ dp-controller@145B0000 {
+ compatible = "samsung,exynos5-dp";
+ reg = <0x145B0000 0x1000>;
+ interrupts = <10 3>;
+ interrupt-parent = <&combiner>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index abc7272..452d0b0 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -11,6 +11,7 @@
/dts-v1/;
#include "exynos5250.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
@@ -37,6 +38,28 @@
s5m8767_pmic@66 {
compatible = "samsung,s5m8767-pmic";
reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
s5m8767,pmic-buck2-dvs-voltage = <1300000>;
s5m8767,pmic-buck3-dvs-voltage = <1100000>;
@@ -276,6 +299,16 @@
op_mode = <1>;
};
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ };
+
buck9_reg: BUCK9 {
regulator-name = "VDD_33_OFF_EXT1";
regulator-min-microvolt = <750000>;
@@ -295,7 +328,22 @@
};
i2c@12C90000 {
- status = "disabled";
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 0>;
+ wlf,ldo2ena = <&gpb0 1 0>;
+ };
};
i2c@12CA0000 {
@@ -429,18 +477,29 @@
vdd-supply = <&ldo8_reg>;
};
- mmc_reg: voltage-regulator {
- compatible = "regulator-fixed";
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
- enable-active-high;
- };
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
- reg_hdmi_en: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "hdmi-en";
+ main_dc_reg: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "MAIN_DC";
+ };
+
+ mmc_reg: voltage-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpx1 1 1>;
+ enable-active-high;
+ };
+
+ reg_hdmi_en: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "hdmi-en";
+ };
};
fixed-rate-clocks {
@@ -450,16 +509,18 @@
};
};
- dp-controller {
+ dp-controller@145B0000 {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
samsung,color-depth = <1>;
samsung,link-rate = <0x0a>;
samsung,lane-count = <4>;
+ status = "okay";
};
fimd: fimd@14400000 {
+ status = "okay";
display-timings {
native-mode = <&timing0>;
timing0: timing@0 {
@@ -480,4 +541,22 @@
rtc {
status = "okay";
};
+
+ usb_hub_bus {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb_hub {
+ compatible = "smsc,usb3503a";
+
+ reset-gpios = <&gpx3 5 1>;
+ connect-gpios = <&gpd1 7 1>;
+ };
+ };
+
+ usb@12110000 {
+ usb-phy = <&usb2_phy>;
+ };
};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index 49f18c2..2538b32 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -250,7 +250,7 @@
samsung,vbus-gpio = <&gpx2 6 0>;
};
- dp-controller {
+ dp-controller@145B0000 {
samsung,color-space = <0>;
samsung,dynamic-range = <0>;
samsung,ycbcr-coeff = <0>;
@@ -260,21 +260,25 @@
pinctrl-names = "default";
pinctrl-0 = <&dp_hpd>;
+ status = "okay";
};
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
+ fimd@14400000 {
+ status = "okay";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
+ };
};
};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index ef57277..63ef124 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -163,11 +163,21 @@
clock-names = "watchdog";
};
+ g2d@10850000 {
+ compatible = "samsung,exynos5250-g2d";
+ reg = <0x10850000 0x1000>;
+ interrupts = <0 91 0>;
+ clocks = <&clock 345>;
+ clock-names = "fimg2d";
+ };
+
codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
samsung,power-domain = <&pd_mfc>;
+ clocks = <&clock 266>;
+ clock-names = "mfc";
};
rtc {
@@ -614,28 +624,20 @@
interrupts = <0 94 0>;
};
- dp-controller {
- compatible = "samsung,exynos5-dp";
- reg = <0x145b0000 0x1000>;
- interrupts = <10 3>;
- interrupt-parent = <&combiner>;
- clocks = <&clock 342>;
- clock-names = "dp";
- #address-cells = <1>;
- #size-cells = <0>;
-
- dptx-phy {
- reg = <0x10040720>;
- samsung,enable-mask = <1>;
- };
+ dp_phy: video-phy@10040720 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040720 4>;
+ #phy-cells = <0>;
};
- fimd {
- compatible = "samsung,exynos5250-fimd";
- interrupt-parent = <&combiner>;
- reg = <0x14400000 0x40000>;
- interrupt-names = "fifo", "vsync", "lcd_sys";
- interrupts = <18 4>, <18 5>, <18 6>;
+ dp-controller@145B0000 {
+ clocks = <&clock 342>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ };
+
+ fimd@14400000 {
clocks = <&clock 133>, <&clock 339>;
clock-names = "sclk_fimd", "fimd";
};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index 5848c42..e695aba 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -59,6 +59,13 @@
interrupt-controller;
#interrupt-cells = <2>;
};
+
+ dp_hpd: dp_hpd {
+ samsung,pins = "gpx0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samaung,pin-drv = <0>;
+ };
};
pinctrl@13410000 {
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 08607df..bafba25 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -30,4 +30,35 @@
clock-frequency = <24000000>;
};
};
+
+ dp-controller@145B0000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+ status = "okay";
+ };
+
+ fimd@14400000 {
+ status = "okay";
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing@0 {
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
+ };
+ };
+ };
+
};
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 8c54c4b..c950bad 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -14,7 +14,10 @@
*/
#include "exynos5.dtsi"
-/include/ "exynos5420-pinctrl.dtsi"
+#include "exynos5420-pinctrl.dtsi"
+
+#include <dt-bindings/clk/exynos-audss-clk.h>
+
/ {
compatible = "samsung,exynos5420";
@@ -65,6 +68,22 @@
#clock-cells = <1>;
};
+ clock_audss: audss-clock-controller@3810000 {
+ compatible = "samsung,exynos5420-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ clocks = <&clock 148>;
+ clock-names = "sclk_audio";
+ };
+
+ codec@11000000 {
+ compatible = "samsung,mfc-v7";
+ reg = <0x11000000 0x10000>;
+ interrupts = <0 96 0>;
+ clocks = <&clock 401>;
+ clock-names = "mfc";
+ };
+
mct@101C0000 {
compatible = "samsung,exynos4210-mct";
reg = <0x101C0000 0x800>;
@@ -90,6 +109,41 @@
};
};
+ gsc_pd: power-domain@10044000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044000 0x20>;
+ };
+
+ isp_pd: power-domain@10044020 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044020 0x20>;
+ };
+
+ mfc_pd: power-domain@10044060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044060 0x20>;
+ };
+
+ disp_pd: power-domain@100440C0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440C0 0x20>;
+ };
+
+ mau_pd: power-domain@100440E0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100440E0 0x20>;
+ };
+
+ g2d_pd: power-domain@10044100 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044100 0x20>;
+ };
+
+ msc_pd: power-domain@10044120 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10044120 0x20>;
+ };
+
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
@@ -145,4 +199,23 @@
clocks = <&clock 260>, <&clock 131>;
clock-names = "uart", "clk_uart_baud0";
};
+
+ dp_phy: video-phy@10040728 {
+ compatible = "samsung,exynos5250-dp-video-phy";
+ reg = <0x10040728 4>;
+ #phy-cells = <0>;
+ };
+
+ dp-controller@145B0000 {
+ clocks = <&clock 412>;
+ clock-names = "dp";
+ phys = <&dp_phy>;
+ phy-names = "dp";
+ };
+
+ fimd@14400000 {
+ samsung,power-domain = <&disp_pd>;
+ clocks = <&clock 147>, <&clock 421>;
+ clock-names = "sclk_fimd", "fimd";
+ };
};
diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi
index ff7f5d8..606da5f 100644
--- a/arch/arm/boot/dts/exynos5440.dtsi
+++ b/arch/arm/boot/dts/exynos5440.dtsi
@@ -18,6 +18,9 @@
aliases {
spi0 = &spi_0;
+ tmuctrl0 = &tmuctrl_0;
+ tmuctrl1 = &tmuctrl_1;
+ tmuctrl2 = &tmuctrl_2;
};
clock: clock-controller@0x160000 {
@@ -207,6 +210,30 @@
clock-names = "rtc";
};
+ tmuctrl_0: tmuctrl@160118 {
+ compatible = "samsung,exynos5440-tmu";
+ reg = <0x160118 0x230>, <0x160368 0x10>;
+ interrupts = <0 58 0>;
+ clocks = <&clock 21>;
+ clock-names = "tmu_apbif";
+ };
+
+ tmuctrl_1: tmuctrl@16011C {
+ compatible = "samsung,exynos5440-tmu";
+ reg = <0x16011C 0x230>, <0x160368 0x10>;
+ interrupts = <0 58 0>;
+ clocks = <&clock 21>;
+ clock-names = "tmu_apbif";
+ };
+
+ tmuctrl_2: tmuctrl@160120 {
+ compatible = "samsung,exynos5440-tmu";
+ reg = <0x160120 0x230>, <0x160368 0x10>;
+ interrupts = <0 58 0>;
+ clocks = <&clock 21>;
+ clock-names = "tmu_apbif";
+ };
+
sata@210000 {
compatible = "snps,exynos5440-ahci";
reg = <0x210000 0x10000>;
diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts
index da0588a..185c7c01 100644
--- a/arch/arm/boot/dts/imx23-evk.dts
+++ b/arch/arm/boot/dts/imx23-evk.dts
@@ -90,6 +90,11 @@
};
apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ fsl,lradc-touchscreen-wires = <4>;
+ };
+
pwm: pwm@80064000 {
pinctrl-names = "default";
pinctrl-0 = <&pwm2_pins_a>;
@@ -107,6 +112,16 @@
pinctrl-0 = <&duart_pins_a>;
status = "okay";
};
+
+ usbphy0: usbphy@8007c000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb0: usb@80080000 {
+ status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts
index d107c4a..fc766ae 100644
--- a/arch/arm/boot/dts/imx23-olinuxino.dts
+++ b/arch/arm/boot/dts/imx23-olinuxino.dts
@@ -69,6 +69,10 @@
};
apbx@80040000 {
+ lradc@80050000 {
+ status = "okay";
+ };
+
duart: serial@80070000 {
pinctrl-names = "default";
pinctrl-0 = <&duart_pins_a>;
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index 587ceef..28b5ce2 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -20,6 +20,8 @@
gpio2 = &gpio2;
serial0 = &auart0;
serial1 = &auart1;
+ spi0 = &ssp0;
+ spi1 = &ssp1;
};
cpus {
@@ -76,23 +78,21 @@
#size-cells = <1>;
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <13>, <56>;
- interrupt-names = "gpmi-dma", "bch";
+ interrupts = <56>;
+ interrupt-names = "bch";
clocks = <&clks 34>;
clock-names = "gpmi_io";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
- fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
ssp0: ssp@80010000 {
reg = <0x80010000 0x2000>;
- interrupts = <15 14>;
+ interrupts = <15>;
clocks = <&clks 33>;
dmas = <&dma_apbh 1>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <1>;
status = "disabled";
};
@@ -366,11 +366,10 @@
ssp1: ssp@80034000 {
reg = <0x80034000 0x2000>;
- interrupts = <2 20>;
+ interrupts = <2>;
clocks = <&clks 33>;
dmas = <&dma_apbh 2>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <2>;
status = "disabled";
};
@@ -472,7 +471,7 @@
auart0: serial@8006c000 {
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
- interrupts = <24 25 23>;
+ interrupts = <24>;
clocks = <&clks 32>;
dmas = <&dma_apbx 6>, <&dma_apbx 7>;
dma-names = "rx", "tx";
@@ -482,7 +481,7 @@
auart1: serial@8006e000 {
compatible = "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
- interrupts = <59 60 58>;
+ interrupts = <59>;
clocks = <&clks 32>;
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
dma-names = "rx", "tx";
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 94c4476..1ec8c94 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -23,10 +23,7 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default";
- pinctrl-0 = <&hog_pins_cfa10036>;
-
- hog_pins_cfa10036: hog-10036@0 {
+ ssd1306_cfa10036: ssd1306-10036@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2073 /* MX28_PAD_SSP0_D7__GPIO_2_7 */
@@ -83,6 +80,8 @@
ssd1306: oled@3c {
compatible = "solomon,ssd1306fb-i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssd1306_cfa10036>;
reg = <0x3c>;
reset-gpios = <&gpio2 7 0>;
solomon,height = <32>;
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts
index c2ef3a3..182b99f 100644
--- a/arch/arm/boot/dts/imx28-cfa10037.dts
+++ b/arch/arm/boot/dts/imx28-cfa10037.dts
@@ -22,13 +22,19 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10037>;
-
- hog_pins_cfa10037: hog-10037@0 {
+ usb_pins_cfa10037: usb-10037@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mac0_pins_cfa10037: mac0-10037@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
>;
fsl,drive-strength = <0>;
@@ -56,7 +62,8 @@
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&mac0_pins_a>;
+ pinctrl-0 = <&mac0_pins_a
+ &mac0_pins_cfa10037>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
@@ -68,6 +75,8 @@
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10037>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 04b2f76..06e4cfa 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -22,32 +22,62 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10049
- &hog_pins_cfa10049_pullup>;
-
- hog_pins_cfa10049: hog-10049@0 {
+ usb_pins_cfa10049: usb-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
- 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
- 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
- 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
- hog_pins_cfa10049_pullup: hog-10049-pullup@0 {
+ i2cmux_pins_cfa10049: i2cmux-10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
+ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ mac0_pins_cfa10049: mac0-10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ pca_pins_cfa10049: pca-10049@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ rotary_pins_cfa10049: rotary-10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ rotary_btn_pins_cfa10049: rotary-btn-10049@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
- 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@@ -60,6 +90,7 @@
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
@@ -120,6 +151,16 @@
fsl,pull-up = <0>;
};
+ lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
w1_gpio_pins: w1-gpio@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -134,7 +175,8 @@
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10049
- &lcdif_pins_cfa10049>;
+ &lcdif_pins_cfa10049
+ &lcdif_pins_cfa10049_pullup>;
display = <&display>;
status = "okay";
@@ -181,6 +223,8 @@
compatible = "i2c-mux-gpio";
#address-cells = <1>;
#size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2cmux_pins_cfa10049>;
mux-gpios = <&gpio1 22 0 &gpio1 23 0>;
i2c-parent = <&i2c1>;
@@ -203,6 +247,8 @@
pca9555: pca9555@20 {
compatible = "nxp,pca9555";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pca_pins_cfa10049>;
interrupt-parent = <&gpio2>;
interrupts = <19 0x2>;
gpio-controller;
@@ -239,6 +285,8 @@
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10049>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -250,7 +298,8 @@
mac0: ethernet@800f0000 {
phy-mode = "rmii";
pinctrl-names = "default";
- pinctrl-0 = <&mac0_pins_a>;
+ pinctrl-0 = <&mac0_pins_a
+ &mac0_pins_cfa10049>;
phy-reset-gpios = <&gpio2 21 0>;
phy-reset-duration = <100>;
status = "okay";
@@ -320,6 +369,8 @@
gpio_keys {
compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rotary_btn_pins_cfa10049>;
#address-cells = <1>;
#size-cells = <0>;
@@ -333,6 +384,8 @@
rotary {
compatible = "rotary-encoder";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rotary_pins_cfa10049>;
gpios = <&gpio3 24 1>, <&gpio3 25 1>;
linux,axis = <1>; /* REL_Y */
rotary-encoder,relative-axis;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
index 1581112..171bcbe 100644
--- a/arch/arm/boot/dts/imx28-cfa10055.dts
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -23,36 +23,13 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10055
- &hog_pins_cfa10055_pullup>;
-
- hog_pins_cfa10055: hog-10055@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <0>;
- };
-
- hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
spi2_pins_cfa10055: spi2-cfa10055@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <1>;
fsl,voltage = <1>;
@@ -98,12 +75,23 @@
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
+
+ lcdif_pins_cfa10055_pullup: lcdif-10055-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
};
lcdif@80030000 {
pinctrl-names = "default";
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
- &lcdif_pins_cfa10055>;
+ &lcdif_pins_cfa10055
+ &lcdif_pins_cfa10055_pullup>;
display = <&display>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx28-cfa10056.dts b/arch/arm/boot/dts/imx28-cfa10056.dts
new file mode 100644
index 0000000..b45dd0e
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10056.dts
@@ -0,0 +1,119 @@
+/*
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+/include/ "imx28-cfa10037.dts"
+
+/ {
+ model = "Crystalfontz CFA-10056 Board";
+ compatible = "crystalfontz,cfa10056", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ spi2_pins_cfa10056: spi2-cfa10056@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+ 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+ 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+ 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
+ lcdif_pins_cfa10056: lcdif-10056@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10056_pullup: lcdif-10056-pullup@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_cfa10056
+ &lcdif_pins_cfa10056_pullup >;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <32000000>;
+ hactive = <480>;
+ vactive = <800>;
+ hback-porch = <2>;
+ hfront-porch = <2>;
+ vback-porch = <2>;
+ vfront-porch = <2>;
+ hsync-len = <5>;
+ vsync-len = <5>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+ };
+
+ spi2 {
+ compatible = "spi-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_pins_cfa10056>;
+ status = "okay";
+ gpio-sck = <&gpio2 16 0>;
+ gpio-mosi = <&gpio2 17 0>;
+ gpio-miso = <&gpio2 18 0>;
+ cs-gpios = <&gpio3 5 0>;
+ num-chipselects = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hx8369: hx8369@0 {
+ compatible = "himax,hx8369a", "himax,hx8369";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ spi-cpol;
+ spi-cpha;
+ gpios-reset = <&gpio3 30 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
index 2da713cd..0333c05 100644
--- a/arch/arm/boot/dts/imx28-cfa10057.dts
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -23,35 +23,16 @@
apb@80000000 {
apbh@80000000 {
pinctrl@80018000 {
- pinctrl-names = "default", "default";
- pinctrl-1 = <&hog_pins_cfa10057
- &hog_pins_cfa10057_pullup>;
-
- hog_pins_cfa10057: hog-10057@0 {
+ usb_pins_cfa10057: usb-10057@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
- 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
- hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
- reg = <0>;
- fsl,pinmux-ids = <
- 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
- 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
- 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
- 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
- 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
- >;
- fsl,drive-strength = <0>;
- fsl,voltage = <1>;
- fsl,pull-up = <1>;
- };
-
lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -164,6 +145,8 @@
reg_usb1_vbus: usb1_vbus {
compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10057>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/imx28-cfa10058.dts b/arch/arm/boot/dts/imx28-cfa10058.dts
new file mode 100644
index 0000000..64c64c5
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10058.dts
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2013 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10058 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+ model = "Crystalfontz CFA-10058 Board";
+ compatible = "crystalfontz,cfa10058", "crystalfontz,cfa10036", "fsl,imx28";
+
+ apb@80000000 {
+ apbh@80000000 {
+ pinctrl@80018000 {
+ usb_pins_cfa10058: usb-10058@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
+ lcdif_pins_cfa10058: lcdif-10058@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+ };
+
+ lcdif@80030000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcdif_24bit_pins_a
+ &lcdif_pins_cfa10058>;
+ display = <&display>;
+ status = "okay";
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hback-porch = <40>;
+ hfront-porch = <40>;
+ vback-porch = <13>;
+ vfront-porch = <29>;
+ hsync-len = <8>;
+ vsync-len = <8>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+ };
+ };
+ };
+ };
+
+ apbx@80040000 {
+ lradc@80050000 {
+ fsl,lradc-touchscreen-wires = <4>;
+ status = "okay";
+ };
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm3_pins_b>;
+ status = "okay";
+ };
+
+ usbphy1: usbphy@8007e000 {
+ status = "okay";
+ };
+ };
+ };
+
+ ahb@80080000 {
+ usb1: usb@80090000 {
+ vbus-supply = <®_usb1_vbus>;
+ pinctrl-0 = <&usbphy1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_usb1_vbus: usb1_vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb_pins_cfa10058>;
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 7 1>;
+ };
+ };
+
+ ahb@80080000 {
+ mac0: ethernet@800f0000 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac0_pins_a>;
+ phy-reset-gpios = <&gpio2 21 0>;
+ phy-reset-duration = <100>;
+ status = "okay";
+ };
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 3 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 44d9da5..0d322a2 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -235,6 +235,12 @@
pinctrl-0 = <&auart2_2pins_b>;
status = "okay";
};
+
+ pwm: pwm@80064000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm4_pins_a>;
+ status = "okay";
+ };
};
};
@@ -270,6 +276,13 @@
};
};
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 4 5000000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
regulators {
compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 9524a05..7363fde 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -15,6 +15,8 @@
interrupt-parent = <&icoll>;
aliases {
+ ethernet0 = &mac0;
+ ethernet1 = &mac1;
gpio0 = &gpio0;
gpio1 = &gpio1;
gpio2 = &gpio2;
@@ -27,8 +29,8 @@
serial2 = &auart2;
serial3 = &auart3;
serial4 = &auart4;
- ethernet0 = &mac0;
- ethernet1 = &mac1;
+ spi0 = &ssp1;
+ spi1 = &ssp2;
};
cpus {
@@ -62,9 +64,9 @@
reg = <0x80000000 0x2000>;
};
- hsadc@80002000 {
+ hsadc: hsadc@80002000 {
reg = <0x80002000 0x2000>;
- interrupts = <13 87>;
+ interrupts = <13>;
dmas = <&dma_apbh 12>;
dma-names = "rx";
status = "disabled";
@@ -86,25 +88,24 @@
clocks = <&clks 25>;
};
- perfmon@80006000 {
+ perfmon: perfmon@80006000 {
reg = <0x80006000 0x800>;
interrupts = <27>;
status = "disabled";
};
- gpmi-nand@8000c000 {
+ gpmi: gpmi-nand@8000c000 {
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <88>, <41>;
- interrupt-names = "gpmi-dma", "bch";
+ interrupts = <41>;
+ interrupt-names = "bch";
clocks = <&clks 50>;
clock-names = "gpmi_io";
dmas = <&dma_apbh 4>;
dma-names = "rx-tx";
- fsl,gpmi-dma-channel = <4>;
status = "disabled";
};
@@ -112,11 +113,10 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80010000 0x2000>;
- interrupts = <96 82>;
+ interrupts = <96>;
clocks = <&clks 46>;
dmas = <&dma_apbh 0>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <0>;
status = "disabled";
};
@@ -124,11 +124,10 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80012000 0x2000>;
- interrupts = <97 83>;
+ interrupts = <97>;
clocks = <&clks 47>;
dmas = <&dma_apbh 1>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <1>;
status = "disabled";
};
@@ -136,11 +135,10 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80014000 0x2000>;
- interrupts = <98 84>;
+ interrupts = <98>;
clocks = <&clks 48>;
dmas = <&dma_apbh 2>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <2>;
status = "disabled";
};
@@ -148,15 +146,14 @@
#address-cells = <1>;
#size-cells = <0>;
reg = <0x80016000 0x2000>;
- interrupts = <99 85>;
+ interrupts = <99>;
clocks = <&clks 49>;
dmas = <&dma_apbh 3>;
dma-names = "rx-tx";
- fsl,ssp-dma-channel = <3>;
status = "disabled";
};
- pinctrl@80018000 {
+ pinctrl: pinctrl@80018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx28-pinctrl", "simple-bus";
@@ -521,6 +518,18 @@
fsl,pull-up = <1>;
};
+ saif0_pins_b: saif0@1 {
+ reg = <1>;
+ fsl,pinmux-ids = <
+ 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */
+ 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */
+ 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */
+ >;
+ fsl,drive-strength = <2>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <1>;
+ };
+
saif1_pins_a: saif1@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -639,6 +648,19 @@
fsl,pull-up = <0>;
};
+ lcdif_sync_pins_a: lcdif-sync@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+ 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+ 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+ 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+ >;
+ fsl,drive-strength = <0>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
can0_pins_a: can0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -674,6 +696,21 @@
fsl,pull-up = <1>;
};
+ spi3_pins_a: spi3@0 {
+ reg = <0>;
+ fsl,pinmux-ids = <
+ 0x3082 /* MX28_PAD_AUART2_RX__SSP3_D4 */
+ 0x3092 /* MX28_PAD_AUART2_TX__SSP3_D5 */
+ 0x2180 /* MX28_PAD_SSP3_SCK__SSP3_SCK */
+ 0x2190 /* MX28_PAD_SSP3_MOSI__SSP3_CMD */
+ 0x21A0 /* MX28_PAD_SSP3_MISO__SSP3_D0 */
+ 0x21B0 /* MX28_PAD_SSP3_SS0__SSP3_D3 */
+ >;
+ fsl,drive-strength = <1>;
+ fsl,voltage = <1>;
+ fsl,pull-up = <0>;
+ };
+
usbphy0_pins_a: usbphy0@0 {
reg = <0>;
fsl,pinmux-ids = <
@@ -705,14 +742,14 @@
};
};
- digctl@8001c000 {
+ digctl: digctl@8001c000 {
compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
reg = <0x8001c000 0x2000>;
interrupts = <89>;
status = "disabled";
};
- etm@80022000 {
+ etm: etm@80022000 {
reg = <0x80022000 0x2000>;
status = "disabled";
};
@@ -733,19 +770,19 @@
clocks = <&clks 26>;
};
- dcp@80028000 {
+ dcp: dcp@80028000 {
reg = <0x80028000 0x2000>;
interrupts = <52 53 54>;
compatible = "fsl-dcp";
};
- pxp@8002a000 {
+ pxp: pxp@8002a000 {
reg = <0x8002a000 0x2000>;
interrupts = <39>;
status = "disabled";
};
- ocotp@8002c000 {
+ ocotp: ocotp@8002c000 {
compatible = "fsl,ocotp";
reg = <0x8002c000 0x2000>;
status = "disabled";
@@ -756,10 +793,10 @@
status = "disabled";
};
- lcdif@80030000 {
+ lcdif: lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 0x2000>;
- interrupts = <38 86>;
+ interrupts = <38>;
clocks = <&clks 55>;
dmas = <&dma_apbh 13>;
dma-names = "rx";
@@ -784,41 +821,41 @@
status = "disabled";
};
- simdbg@8003c000 {
+ simdbg: simdbg@8003c000 {
reg = <0x8003c000 0x200>;
status = "disabled";
};
- simgpmisel@8003c200 {
+ simgpmisel: simgpmisel@8003c200 {
reg = <0x8003c200 0x100>;
status = "disabled";
};
- simsspsel@8003c300 {
+ simsspsel: simsspsel@8003c300 {
reg = <0x8003c300 0x100>;
status = "disabled";
};
- simmemsel@8003c400 {
+ simmemsel: simmemsel@8003c400 {
reg = <0x8003c400 0x100>;
status = "disabled";
};
- gpiomon@8003c500 {
+ gpiomon: gpiomon@8003c500 {
reg = <0x8003c500 0x100>;
status = "disabled";
};
- simenet@8003c700 {
+ simenet: simenet@8003c700 {
reg = <0x8003c700 0x100>;
status = "disabled";
};
- armjtag@8003c800 {
+ armjtag: armjtag@8003c800 {
reg = <0x8003c800 0x100>;
status = "disabled";
};
- };
+ };
apbx@80040000 {
compatible = "simple-bus";
@@ -836,16 +873,15 @@
saif0: saif@80042000 {
compatible = "fsl,imx28-saif";
reg = <0x80042000 0x2000>;
- interrupts = <59 80>;
+ interrupts = <59>;
#clock-cells = <0>;
clocks = <&clks 53>;
dmas = <&dma_apbx 4>;
dma-names = "rx-tx";
- fsl,saif-dma-channel = <4>;
status = "disabled";
};
- power@80044000 {
+ power: power@80044000 {
reg = <0x80044000 0x2000>;
status = "disabled";
};
@@ -853,15 +889,14 @@
saif1: saif@80046000 {
compatible = "fsl,imx28-saif";
reg = <0x80046000 0x2000>;
- interrupts = <58 81>;
+ interrupts = <58>;
clocks = <&clks 54>;
dmas = <&dma_apbx 5>;
dma-names = "rx-tx";
- fsl,saif-dma-channel = <5>;
status = "disabled";
};
- lradc@80050000 {
+ lradc: lradc@80050000 {
compatible = "fsl,imx28-lradc";
reg = <0x80050000 0x2000>;
interrupts = <10 14 15 16 17 18 19
@@ -869,15 +904,15 @@
status = "disabled";
};
- spdif@80054000 {
+ spdif: spdif@80054000 {
reg = <0x80054000 0x2000>;
- interrupts = <45 66>;
+ interrupts = <45>;
dmas = <&dma_apbx 2>;
dma-names = "tx";
status = "disabled";
};
- rtc@80056000 {
+ mxs_rtc: rtc@80056000 {
compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
reg = <0x80056000 0x2000>;
interrupts = <29>;
@@ -888,11 +923,10 @@
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 0x2000>;
- interrupts = <111 68>;
+ interrupts = <111>;
clock-frequency = <100000>;
dmas = <&dma_apbx 6>;
dma-names = "rx-tx";
- fsl,i2c-dma-channel = <6>;
status = "disabled";
};
@@ -901,11 +935,10 @@
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x8005a000 0x2000>;
- interrupts = <110 69>;
+ interrupts = <110>;
clock-frequency = <100000>;
dmas = <&dma_apbx 7>;
dma-names = "rx-tx";
- fsl,i2c-dma-channel = <7>;
status = "disabled";
};
@@ -918,7 +951,7 @@
status = "disabled";
};
- timrot@80068000 {
+ timer: timrot@80068000 {
compatible = "fsl,imx28-timrot", "fsl,timrot";
reg = <0x80068000 0x2000>;
interrupts = <48 49 50 51>;
@@ -928,10 +961,9 @@
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
+ interrupts = <112>;
dmas = <&dma_apbx 8>, <&dma_apbx 9>;
dma-names = "rx", "tx";
- fsl,auart-dma-channel = <8 9>;
clocks = <&clks 45>;
status = "disabled";
};
@@ -939,7 +971,7 @@
auart1: serial@8006c000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
- interrupts = <113 72 73>;
+ interrupts = <113>;
dmas = <&dma_apbx 10>, <&dma_apbx 11>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
@@ -949,7 +981,7 @@
auart2: serial@8006e000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006e000 0x2000>;
- interrupts = <114 74 75>;
+ interrupts = <114>;
dmas = <&dma_apbx 12>, <&dma_apbx 13>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
@@ -959,7 +991,7 @@
auart3: serial@80070000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80070000 0x2000>;
- interrupts = <115 76 77>;
+ interrupts = <115>;
dmas = <&dma_apbx 14>, <&dma_apbx 15>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
@@ -969,7 +1001,7 @@
auart4: serial@80072000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x80072000 0x2000>;
- interrupts = <116 78 79>;
+ interrupts = <116>;
dmas = <&dma_apbx 0>, <&dma_apbx 1>;
dma-names = "rx", "tx";
clocks = <&clks 45>;
@@ -1026,7 +1058,7 @@
status = "disabled";
};
- dflpt@800c0000 {
+ dflpt: dflpt@800c0000 {
reg = <0x800c0000 0x10000>;
status = "disabled";
};
@@ -1049,10 +1081,9 @@
status = "disabled";
};
- switch@800f8000 {
+ etn_switch: switch@800f8000 {
reg = <0x800f8000 0x8000>;
status = "disabled";
};
-
};
};
diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts
index db2060c..9c1167b0 100644
--- a/arch/arm/boot/dts/msm8960-cdp.dts
+++ b/arch/arm/boot/dts/msm8960-cdp.dts
@@ -26,7 +26,7 @@
cpu-offset = <0x80000>;
};
- msmgpio: gpio@fd510000 {
+ msmgpio: gpio@800000 {
compatible = "qcom,msm-gpio";
gpio-controller;
#gpio-cells = <2>;
@@ -34,7 +34,7 @@
interrupts = <0 32 0x4>;
interrupt-controller;
#interrupt-cells = <2>;
- reg = <0xfd510000 0x4000>;
+ reg = <0x800000 0x4000>;
};
serial@16440000 {
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts
index 08b7267..65d7b60 100644
--- a/arch/arm/boot/dts/omap5-uevm.dts
+++ b/arch/arm/boot/dts/omap5-uevm.dts
@@ -235,7 +235,7 @@
};
&mmc1 {
- vmmc-supply = <&vmmcsd_fixed>;
+ vmmc-supply = <&ldo9_reg>;
bus-width = <4>;
};
@@ -282,6 +282,7 @@
regulators {
smps123_reg: smps123 {
+ /* VDD_OPP_MPU */
regulator-name = "smps123";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1500000>;
@@ -290,6 +291,7 @@
};
smps45_reg: smps45 {
+ /* VDD_OPP_MM */
regulator-name = "smps45";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -298,6 +300,7 @@
};
smps6_reg: smps6 {
+ /* VDD_DDR3 - over VDD_SMPS6 */
regulator-name = "smps6";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
@@ -306,6 +309,7 @@
};
smps7_reg: smps7 {
+ /* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
regulator-name = "smps7";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -314,6 +318,7 @@
};
smps8_reg: smps8 {
+ /* VDD_OPP_CORE */
regulator-name = "smps8";
regulator-min-microvolt = < 600000>;
regulator-max-microvolt = <1310000>;
@@ -322,15 +327,15 @@
};
smps9_reg: smps9 {
+ /* VDDA_2v1_AUD over VDD_2v1 */
regulator-name = "smps9";
regulator-min-microvolt = <2100000>;
regulator-max-microvolt = <2100000>;
- regulator-always-on;
- regulator-boot-on;
ti,smps-range = <0x80>;
};
smps10_reg: smps10 {
+ /* VBUS_5V_OTG */
regulator-name = "smps10";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -339,38 +344,40 @@
};
ldo1_reg: ldo1 {
+ /* VDDAPHY_CAM: vdda_csiport */
regulator-name = "ldo1";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
};
ldo2_reg: ldo2 {
+ /* VCC_2V8_DISP: Does not go anywhere */
regulator-name = "ldo2";
- regulator-min-microvolt = <2900000>;
- regulator-max-microvolt = <2900000>;
- regulator-always-on;
- regulator-boot-on;
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ /* Unused */
+ status = "disabled";
};
ldo3_reg: ldo3 {
+ /* VDDAPHY_MDM: vdda_lli */
regulator-name = "ldo3";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
+ /* Only if Modem is used */
+ status = "disabled";
};
ldo4_reg: ldo4 {
+ /* VDDAPHY_DISP: vdda_dsiport/hdmi */
regulator-name = "ldo4";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
};
ldo5_reg: ldo5 {
+ /* VDDA_1V8_PHY: usb/sata/hdmi.. */
regulator-name = "ldo5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -379,38 +386,43 @@
};
ldo6_reg: ldo6 {
+ /* VDDS_1V2_WKUP: hsic/ldo_emu_wkup */
regulator-name = "ldo6";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo7_reg: ldo7 {
+ /* VDD_VPP: vpp1 */
regulator-name = "ldo7";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2000000>;
+ /* Only for efuse reprograming! */
+ status = "disabled";
};
ldo8_reg: ldo8 {
+ /* VDD_3v0: Does not go anywhere */
regulator-name = "ldo8";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
regulator-boot-on;
+ /* Unused */
+ status = "disabled";
};
ldo9_reg: ldo9 {
+ /* VCC_DV_SDIO: vdds_sdcard */
regulator-name = "ldo9";
regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
+ regulator-max-microvolt = <3000000>;
regulator-boot-on;
};
ldoln_reg: ldoln {
+ /* VDDA_1v8_REF: vdds_osc/mm_l4per.. */
regulator-name = "ldoln";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
@@ -419,12 +431,20 @@
};
ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
regulator-name = "ldousb";
regulator-min-microvolt = <3250000>;
regulator-max-microvolt = <3250000>;
regulator-always-on;
regulator-boot-on;
};
+
+ regen3_reg: regen3 {
+ /* REGEN3 controls LDO9 supply to card */
+ regulator-name = "regen3";
+ regulator-always-on;
+ regulator-boot-on;
+ };
};
};
};
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index f9d92da..83bb0ef 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -28,5 +28,16 @@
marvell,intc-priority;
marvell,intc-nr-irqs = <56>;
};
+
+ gpio: gpio@40e00000 {
+ compatible = "intel,pxa3xx-gpio";
+ reg = <0x40e00000 0x10000>;
+ interrupt-names = "gpio0", "gpio1", "gpio_mux";
+ interrupts = <8 9 10>;
+ gpio-controller;
+ #gpio-cells = <0x2>;
+ interrupt-controller;
+ #interrupt-cells = <0x2>;
+ };
};
};
diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
index f603c69..e657a9d 100644
--- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts
+++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts
@@ -50,3 +50,25 @@
};
};
};
+
+&i2c5 {
+ vdd_dvfs: max8973@1b {
+ compatible = "maxim,max8973";
+ reg = <0x1b>;
+
+ regulator-min-microvolt = <935000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+};
+
+&cpu0 {
+ cpu0-supply = <&vdd_dvfs>;
+ operating-points = <
+ /* kHz uV */
+ 1950000 1115000
+ 1462500 995000
+ >;
+ voltage-tolerance = <1>; /* 1% */
+};
diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi
index 4ff2019..6c26caa 100644
--- a/arch/arm/boot/dts/r8a73a4.dtsi
+++ b/arch/arm/boot/dts/r8a73a4.dtsi
@@ -85,4 +85,137 @@
interrupt-parent = <&gic>;
interrupts = <0 69 4>;
};
+
+ i2c0: i2c@e6500000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6500000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 174 0x4>;
+ };
+
+ i2c1: i2c@e6510000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6510000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 175 0x4>;
+ };
+
+ i2c2: i2c@e6520000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6520000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 176 0x4>;
+ };
+
+ i2c3: i2c@e6530000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6530000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 177 0x4>;
+ };
+
+ i2c4: i2c@e6540000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6540000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 178 0x4>;
+ };
+
+ i2c5: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 179 0x4>;
+ };
+
+ i2c6: i2c@e6550000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6550000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 184 0x4>;
+ };
+
+ i2c7: i2c@e6560000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6560000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 185 0x4>;
+ };
+
+ i2c8: i2c@e6570000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,rmobile-iic";
+ reg = <0 0xe6570000 0 0x428>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 173 0x4>;
+ };
+
+ mmcif0: mmcif@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 169 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmcif@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 170 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0 0xe6050000 0 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ sdhi0: sdhi@ee100000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee100000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 165 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi1: sdhi@ee120000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee120000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 166 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi2: sdhi@ee140000 {
+ compatible = "renesas,r8a73a4-sdhi";
+ reg = <0 0xee140000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 167 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
index 09ea22c..366f729 100644
--- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
@@ -10,6 +10,7 @@
/dts-v1/;
/include/ "r8a7740.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "armadillo 800 eva reference";
@@ -33,6 +34,21 @@
regulator-boot-on;
};
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
+ };
+ led2 {
+ gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&i2c0 {
@@ -41,5 +57,23 @@
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
+ pinctrl-0 = <&st1232_pins>;
+ pinctrl-names = "default";
+ gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&scifa1_pins>;
+ pinctrl-names = "default";
+
+ scifa1_pins: scifa1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
+ };
+
+ st1232_pins: st1232 {
+ renesas,groups = "intc_irq10";
+ renesas,function = "intc";
};
};
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 24e9306..e18a195 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -139,4 +139,12 @@
0 72 0x4
0 73 0x4>;
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a7740";
+ reg = <0xe6050000 0x8000>,
+ <0xe605800c 0x20>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
index 4743735..45ac404 100644
--- a/arch/arm/boot/dts/r8a7778.dtsi
+++ b/arch/arm/boot/dts/r8a7778.dtsi
@@ -32,4 +32,70 @@
reg = <0xfe438000 0x1000>,
<0xfe430000 0x100>;
};
+
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 103 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 27>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ pfc: pfc@fffc0000 {
+ compatible = "renesas,pfc-r8a7778";
+ reg = <0xfffc000 0x118>;
+ #gpio-range-cells = <3>;
+ };
};
diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
index 72be4c8..b64705b 100644
--- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts
+++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts
@@ -11,6 +11,7 @@
/dts-v1/;
/include/ "r8a7779.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "marzen";
@@ -37,6 +38,9 @@
lan0@18000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x18000000 0x100>;
+ pinctrl-0 = <&lan0_pins>;
+ pinctrl-names = "default";
+
phy-mode = "mii";
interrupt-parent = <&gic>;
interrupts = <0 28 0x4>;
@@ -44,4 +48,49 @@
vddvario-supply = <&fixedregulator3v3>;
vdd33a-supply = <&fixedregulator3v3>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led2 {
+ gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
+ };
+ led3 {
+ gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;
+ };
+ led4 {
+ gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pfc {
+ pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>;
+ pinctrl-names = "default";
+
+ lan0_pins: lan0 {
+ intc {
+ renesas,groups = "intc_irq1_b";
+ renesas,function = "intc";
+ };
+ lbsc {
+ renesas,groups = "lbsc_ex_cs0";
+ renesas,function = "lbsc";
+ };
+ };
+
+ scif2_pins: scif2 {
+ renesas,groups = "scif2_data_c";
+ renesas,function = "scif2";
+ };
+
+ scif4_pins: scif4 {
+ renesas,groups = "scif4_data";
+ renesas,function = "scif4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd",
+ "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
};
diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
index 7f146c6..e9fbe3d 100644
--- a/arch/arm/boot/dts/r8a7779.dtsi
+++ b/arch/arm/boot/dts/r8a7779.dtsi
@@ -48,6 +48,90 @@
<0xf0000100 0x100>;
};
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc40000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 141 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc41000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 142 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc42000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 143 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc43000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 144 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc44000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 145 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@ffc45000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc45000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 146 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio6: gpio@ffc46000 {
+ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar";
+ reg = <0xffc46000 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 147 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 9>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
irqpin0: irqpin@fe780010 {
compatible = "renesas,intc-irqpin";
#interrupt-cells = <2>;
@@ -101,6 +185,12 @@
interrupts = <0 81 0x4>;
};
+ pfc: pfc@fffc0000 {
+ compatible = "renesas,pfc-r8a7779";
+ reg = <0xfffc0000 0x23c>;
+ #gpio-range-cells = <3>;
+ };
+
thermal@ffc48000 {
compatible = "renesas,rcar-thermal";
reg = <0xffc48000 0x38>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index 339d9b1..3b879e7 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -38,6 +38,78 @@
interrupts = <1 9 0xf04>;
};
+ gpio0: gpio@ffc40000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc40000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 4 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio1: gpio@ffc41000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc41000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 5 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio2: gpio@ffc42000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc42000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 6 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio3: gpio@ffc43000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc43000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 7 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio4: gpio@ffc44000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc44000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 8 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
+ gpio5: gpio@ffc45000 {
+ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar";
+ reg = <0 0xffc45000 0 0x2c>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 9 0x4>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 32>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 0xf08>,
@@ -54,4 +126,64 @@
interrupt-parent = <&gic>;
interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>;
};
+
+ mmcif0: mmcif@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 169 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmcif@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 170 0x4>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ pfc: pfc@e6060000 {
+ compatible = "renesas,pfc-r8a7790";
+ reg = <0 0xe6060000 0 0x250>;
+ #gpio-range-cells = <3>;
+ };
+
+ sdhi0: sdhi@ee100000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee100000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 165 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi1: sdhi@ee120000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee120000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 166 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi2: sdhi@ee140000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee140000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 167 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
+
+ sdhi3: sdhi@ee160000 {
+ compatible = "renesas,r8a7790-sdhi";
+ reg = <0 0xee160000 0 0x100>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 168 4>;
+ cap-sd-highspeed;
+ status = "disabled";
+ };
};
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index a1d5e25..ff63fbb 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -48,6 +48,11 @@
};
};
+ pmu {
+ compatible = "arm,cortex-a5-pmu";
+ interrupts = <46 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
memory {
reg = <0x20000000 0x8000000>;
};
diff --git a/arch/arm/boot/dts/sh7372.dtsi b/arch/arm/boot/dts/sh7372.dtsi
index 7bf020e..249f65be2 100644
--- a/arch/arm/boot/dts/sh7372.dtsi
+++ b/arch/arm/boot/dts/sh7372.dtsi
@@ -23,4 +23,12 @@
reg = <0x0>;
};
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-sh7372";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
index b6f759e..b99e890 100644
--- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
+++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts
@@ -13,6 +13,7 @@
/dts-v1/;
/include/ "sh73a0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "KZM-A9-GT";
@@ -58,6 +59,24 @@
regulator-boot-on;
};
+ vmmc_sdhi0: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI0 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vmmc_sdhi2: regulator@3 {
+ compatible = "regulator-fixed";
+ regulator-name = "SDHI2 Vcc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&pfc 14 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
lan9220@10000000 {
compatible = "smsc,lan9220", "smsc,lan9115";
reg = <0x10000000 0x100>;
@@ -70,6 +89,22 @@
vddvario-supply = <®_1p8v>;
vdd33a-supply = <®_3p3v>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ led1 {
+ gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ };
+ led2 {
+ gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ };
+ led3 {
+ gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ };
+ led4 {
+ gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ };
+ };
};
&i2c0 {
@@ -145,20 +180,71 @@
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_pins>;
+ pinctrl-names = "default";
+};
+
&mmcif {
+ pinctrl-0 = <&mmcif_pins>;
+ pinctrl-names = "default";
+
bus-width = <8>;
vmmc-supply = <®_1p8v>;
status = "okay";
};
+&pfc {
+ pinctrl-0 = <&scifa4_pins>;
+ pinctrl-names = "default";
+
+ i2c3_pins: i2c3 {
+ renesas,groups = "i2c3_1";
+ renesas,function = "i2c3";
+ };
+
+ mmcif_pins: mmcif {
+ mux {
+ renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0";
+ renesas,function = "mmc0";
+ };
+ cfg {
+ renesas,groups = "mmc0_data8_0";
+ renesas,pins = "PORT279";
+ bias-pull-up;
+ };
+ };
+
+ scifa4_pins: scifa4 {
+ renesas,groups = "scifa4_data", "scifa4_ctrl";
+ renesas,function = "scifa4";
+ };
+
+ sdhi0_pins: sdhi0 {
+ renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp";
+ renesas,function = "sdhi0";
+ };
+
+ sdhi2_pins: sdhi2 {
+ renesas,groups = "sdhi2_data4", "sdhi2_ctrl";
+ renesas,function = "sdhi2";
+ };
+};
+
&sdhi0 {
- vmmc-supply = <®_3p3v>;
+ pinctrl-0 = <&sdhi0_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi0>;
bus-width = <4>;
status = "okay";
};
&sdhi2 {
- vmmc-supply = <®_3p3v>;
+ pinctrl-0 = <&sdhi2_pins>;
+ pinctrl-names = "default";
+
+ vmmc-supply = <&vmmc_sdhi2>;
bus-width = <4>;
broken-cd;
status = "okay";
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index b977502..86e79fe 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -222,4 +222,12 @@
cap-sd-highspeed;
status = "disabled";
};
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-sh73a0";
+ reg = <0xe6050000 0x8000>,
+ <0xe605801c 0x1c>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
diff --git a/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
new file mode 100644
index 0000000..e079996
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540-pinctrl.dtsi
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include "ste-nomadik-pinctrl.dtsi"
+
+/ {
+ soc {
+ pinctrl {
+ uart0 {
+ uart0_default_mux: uart0_mux {
+ default_mux {
+ ste,function = "u0";
+ ste,pins = "u0_a_1";
+ };
+ };
+
+ uart0_default_mode: uart0_default {
+ default_cfg1 {
+ ste,pins = "GPIO0", "GPIO2";
+ ste,config = <&in_pu>;
+ };
+
+ default_cfg2 {
+ ste,pins = "GPIO1", "GPIO3";
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart0_sleep_mode: uart0_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO0", "GPIO2";
+ ste,config = <&slpm_in_pu>;
+ };
+
+ sleep_cfg2 {
+ ste,pins = "GPIO1", "GPIO3";
+ ste,config = <&slpm_out_hi>;
+ };
+ };
+ };
+
+ uart2 {
+ uart2_default_mode: uart2_default {
+ default_mux {
+ ste,function = "u2";
+ ste,pins = "u2txrx_a_1";
+ };
+
+ default_cfg1 {
+ ste,pins = "GPIO120";
+ ste,config = <&in_pu>;
+ };
+
+ default_cfg2 {
+ ste,pins = "GPIO121";
+ ste,config = <&out_hi>;
+ };
+ };
+
+ uart2_sleep_mode: uart2_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO120";
+ ste,config = <&slpm_in_pu>;
+ };
+
+ sleep_cfg2 {
+ ste,pins = "GPIO121";
+ ste,config = <&slpm_out_hi>;
+ };
+ };
+ };
+
+ i2c0 {
+ i2c0_default_mux: i2c_mux {
+ default_mux {
+ ste,function = "i2c0";
+ ste,pins = "i2c0_a_1";
+ };
+ };
+
+ i2c0_default_mode: i2c_default {
+ default_cfg1 {
+ ste,pins = "GPIO147", "GPIO148";
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c0_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO147", "GPIO148";
+ ste,config = <&slpm_in_pu>;
+ };
+ };
+ };
+
+ i2c1 {
+ i2c1_default_mux: i2c_mux {
+ default_mux {
+ ste,function = "i2c1";
+ ste,pins = "i2c1_b_2";
+ };
+ };
+
+ i2c1_default_mode: i2c_default {
+ default_cfg1 {
+ ste,pins = "GPIO16", "GPIO17";
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c1_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO16", "GPIO17";
+ ste,config = <&slpm_in_pu>;
+ };
+ };
+ };
+
+ i2c2 {
+ i2c2_default_mux: i2c_mux {
+ default_mux {
+ ste,function = "i2c2";
+ ste,pins = "i2c2_b_2";
+ };
+ };
+
+ i2c2_default_mode: i2c_default {
+ default_cfg1 {
+ ste,pins = "GPIO10", "GPIO11";
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c2_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO11", "GPIO11";
+ ste,config = <&slpm_in_pu>;
+ };
+ };
+ };
+
+ i2c4 {
+ i2c4_default_mux: i2c_mux {
+ default_mux {
+ ste,function = "i2c4";
+ ste,pins = "i2c4_b_2";
+ };
+ };
+
+ i2c4_default_mode: i2c_default {
+ default_cfg1 {
+ ste,pins = "GPIO122", "GPIO123";
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c4_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO122", "GPIO123";
+ ste,config = <&slpm_in_pu>;
+ };
+ };
+ };
+
+ i2c5 {
+ i2c5_default_mux: i2c_mux {
+ default_mux {
+ ste,function = "i2c5";
+ ste,pins = "i2c5_c_2";
+ };
+ };
+
+ i2c5_default_mode: i2c_default {
+ default_cfg1 {
+ ste,pins = "GPIO118", "GPIO119";
+ ste,config = <&in_pu>;
+ };
+ };
+
+ i2c5_sleep_mode: i2c_sleep {
+ sleep_cfg1 {
+ ste,pins = "GPIO118", "GPIO119";
+ ste,config = <&slpm_in_pu>;
+ };
+ };
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ste-ccu8540.dts b/arch/arm/boot/dts/ste-ccu8540.dts
new file mode 100644
index 0000000..7f3baf5
--- /dev/null
+++ b/arch/arm/boot/dts/ste-ccu8540.dts
@@ -0,0 +1,86 @@
+/*
+ * Copyright 2013 ST-Ericsson AB
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "ste-dbx5x0.dtsi"
+#include "ste-ccu8540-pinctrl.dtsi"
+
+/ {
+ model = "ST-Ericsson U8540 platform with Device Tree";
+ compatible = "st-ericsson,ccu8540", "st-ericsson,u8540";
+
+ memory@0 {
+ reg = <0x20000000 0x1f000000>, <0xc0000000 0x3f000000>;
+ };
+
+ soc {
+ pinctrl {
+ compatible = "stericsson,db8540-pinctrl";
+ };
+
+ prcmu@80157000 {
+ reg = <0x80157000 0x2000>, <0x801b0000 0x8000>, <0x801b8000 0x3000>;
+ reg-names = "prcmu", "prcmu-tcpm", "prcmu-tcdm";
+ };
+
+ uart@80120000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>;
+ pinctrl-1 = <&uart0_sleep_mode>;
+ status = "okay";
+ };
+
+ uart@80121000 {
+ status = "okay";
+ };
+
+ uart@80007000 {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&uart2_default_mode>;
+ pinctrl-1 = <&uart2_sleep_mode>;
+ status = "okay";
+ };
+
+ i2c0: i2c@80004000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
+ pinctrl-1 = <&i2c0_sleep_mode>;
+ };
+
+ i2c1: i2c@80122000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
+ pinctrl-1 = <&i2c1_sleep_mode>;
+ };
+
+ i2c2: i2c@80128000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c2_default_mux>, <&i2c2_default_mode>;
+ pinctrl-1 = <&i2c2_sleep_mode>;
+ };
+
+ i2c3: i2c@80110000 {
+ status = "disabled";
+ };
+
+ i2c4: i2c@8012a000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c4_default_mux>, <&i2c4_default_mode>;
+ pinctrl-1 = <&i2c4_sleep_mode>;
+ };
+
+ i2c5: i2c@80001000 {
+ pinctrl-names = "default","sleep";
+ pinctrl-0 = <&i2c5_default_mux>, <&i2c5_default_mode>;
+ pinctrl-1 = <&i2c5_sleep_mode>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/ccu9540.dts b/arch/arm/boot/dts/ste-ccu9540.dts
similarity index 97%
rename from arch/arm/boot/dts/ccu9540.dts
rename to arch/arm/boot/dts/ste-ccu9540.dts
index ed29ec7..2295087 100644
--- a/arch/arm/boot/dts/ccu9540.dts
+++ b/arch/arm/boot/dts/ste-ccu9540.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
/ {
model = "ST-Ericsson CCU9540 platform with Device Tree";
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi
similarity index 96%
rename from arch/arm/boot/dts/dbx5x0.dtsi
rename to arch/arm/boot/dts/ste-dbx5x0.dtsi
index a152945..1c1091e 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi
@@ -245,7 +245,7 @@
<22 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "IRQ_HOTMON_LOW", "IRQ_HOTMON_HIGH";
status = "disabled";
- };
+ };
db8500-prcmu-regulators {
compatible = "stericsson,db8500-prcmu-regulator";
@@ -457,8 +457,36 @@
stericsson,earpeice-cmv = <950>; /* Units in mV. */
};
+ ext_regulators: ab8500-ext-regulators {
+ compatible = "stericsson,ab8500-ext-regulator";
+
+ ab8500_ext1_reg: ab8500_ext1 {
+ regulator-compatible = "ab8500_ext1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ab8500_ext2_reg: ab8500_ext2 {
+ regulator-compatible = "ab8500_ext2";
+ regulator-min-microvolt = <1360000>;
+ regulator-max-microvolt = <1360000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ab8500_ext3_reg: ab8500_ext3 {
+ regulator-compatible = "ab8500_ext3";
+ regulator-min-microvolt = <3400000>;
+ regulator-max-microvolt = <3400000>;
+ regulator-boot-on;
+ };
+ };
+
ab8500-regulators {
compatible = "stericsson,ab8500-regulator";
+ vin-supply = <&ab8500_ext3_reg>;
// supplies to the display/camera
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
diff --git a/arch/arm/boot/dts/href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
similarity index 99%
rename from arch/arm/boot/dts/href.dtsi
rename to arch/arm/boot/dts/ste-href.dtsi
index 9db41b9..370e03f 100644
--- a/arch/arm/boot/dts/href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -10,7 +10,7 @@
*/
#include <dt-bindings/interrupt-controller/irq.h>
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
/ {
memory {
diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/ste-hrefprev60.dts
similarity index 92%
rename from arch/arm/boot/dts/hrefprev60.dts
rename to arch/arm/boot/dts/ste-hrefprev60.dts
index c6bb07d..d8d3b99 100644
--- a/arch/arm/boot/dts/hrefprev60.dts
+++ b/arch/arm/boot/dts/ste-hrefprev60.dts
@@ -10,9 +10,9 @@
*/
/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
+#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (pre-v60) platform with Device Tree";
diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/ste-hrefv60plus.dts
similarity index 98%
rename from arch/arm/boot/dts/hrefv60plus.dts
rename to arch/arm/boot/dts/ste-hrefv60plus.dts
index 3d580d6..6e52ebb 100644
--- a/arch/arm/boot/dts/hrefv60plus.dts
+++ b/arch/arm/boot/dts/ste-hrefv60plus.dts
@@ -10,9 +10,9 @@
*/
/dts-v1/;
-#include "dbx5x0.dtsi"
-#include "href.dtsi"
-#include "stuib.dtsi"
+#include "ste-dbx5x0.dtsi"
+#include "ste-href.dtsi"
+#include "ste-stuib.dtsi"
/ {
model = "ST-Ericsson HREF (v60+) platform with Device Tree";
diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
new file mode 100644
index 0000000..efddee9
--- /dev/null
+++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi
@@ -0,0 +1,95 @@
+/*
+ * Copyright 2012 ST-Ericsson
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+#include <dt-bindings/pinctrl/nomadik.h>
+
+/ {
+ in_nopull: in_nopull {
+ ste,input = <INPUT_NOPULL>;
+ };
+
+ in_pu: input_pull_up {
+ ste,input = <INPUT_PULLUP>;
+ };
+
+ in_pd: input_pull_down {
+ ste,input = <INPUT_PULLDOWN>;
+ };
+
+ out_hi: output_high {
+ ste,output = <OUTPUT_HIGH>;
+ };
+
+ out_lo: output_low {
+ ste,output = <OUTPUT_LOW>;
+ };
+
+ gpio_out_lo: gpio_output_low {
+ ste,gpio = <GPIOMODE_ENABLED>;
+ ste,output = <OUTPUT_LOW>;
+ };
+
+ slpm_in_pu: slpm_in_pu {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_INPUT_PULLUP>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_in_wkup_pdis: slpm_in_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_out_lo: slpm_out_lo {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_LOW>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_out_hi: slpm_out_hi {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ };
+
+ slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ slpm_out_wkup_pdis: slpm_out_wkup_pdis {
+ ste,sleep = <SLPM_ENABLED>;
+ ste,sleep-output = <SLPM_DIR_OUTPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ in_wkup_pdis: in_wkup_pdis {
+ ste,sleep-input = <SLPM_DIR_INPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ out_hi_wkup_pdis: out_hi_wkup_pdis {
+ ste,sleep-output = <SLPM_OUTPUT_HIGH>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+
+ out_wkup_pdis: out_wkup_pdis {
+ ste,sleep-output = <SLPM_DIR_OUTPUT>;
+ ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>;
+ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>;
+ };
+};
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index a3acfa7..9169d30 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -140,18 +140,30 @@
};
};
i2c0 {
+ i2c0_default_mux: i2c0_mux {
+ i2c0_default_mux {
+ ste,function = "i2c0";
+ ste,pins = "i2c0_a_1";
+ };
+ };
i2c0_default_mode: i2c0_default {
i2c0_default_cfg {
ste,pins = "GPIO62_D3", "GPIO63_D2";
- ste,input = <1>;
+ ste,input = <0>;
};
};
};
i2c1 {
+ i2c1_default_mux: i2c1_mux {
+ i2c1_default_mux {
+ ste,function = "i2c1";
+ ste,pins = "i2c1_a_1";
+ };
+ };
i2c1_default_mode: i2c1_default {
i2c1_default_cfg {
ste,pins = "GPIO53_L4", "GPIO54_L3";
- ste,input = <1>;
+ ste,input = <0>;
};
};
};
@@ -159,7 +171,7 @@
i2c2_default_mode: i2c2_default {
i2c2_default_cfg {
ste,pins = "GPIO73_C21", "GPIO74_C20";
- ste,input = <1>;
+ ste,input = <0>;
};
};
};
@@ -682,13 +694,17 @@
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
- compatible = "i2c-gpio";
- gpios = <&gpio1 31 0>, /* sda */
- <&gpio1 30 0>; /* scl */
+ compatible = "st,nomadik-i2c", "arm,primecell";
+ reg = <0x101f8000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <20>;
+ clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&i2c0clk>, <&pclki2c0>;
+ clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
- pinctrl-0 = <&i2c0_default_mode>;
+ pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>;
stw4811@2d {
compatible = "st,stw4811";
@@ -698,13 +714,17 @@
/* I2C1 connected to various sensors */
i2c1 {
- compatible = "i2c-gpio";
- gpios = <&gpio1 22 0>, /* sda */
- <&gpio1 21 0>; /* scl */
+ compatible = "st,nomadik-i2c", "arm,primecell";
+ reg = <0x101f7000 0x1000>;
+ interrupt-parent = <&vica>;
+ interrupts = <21>;
+ clock-frequency = <100000>;
#address-cells = <1>;
#size-cells = <0>;
+ clocks = <&i2c1clk>, <&pclki2c1>;
+ clock-names = "mclk", "apb_pclk";
pinctrl-names = "default";
- pinctrl-0 = <&i2c1_default_mode>;
+ pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>;
camera@2d {
compatible = "st,camera";
diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/ste-snowball.dts
similarity index 93%
rename from arch/arm/boot/dts/snowball.dts
rename to arch/arm/boot/dts/ste-snowball.dts
index 49824be..f1fc128 100644
--- a/arch/arm/boot/dts/snowball.dts
+++ b/arch/arm/boot/dts/ste-snowball.dts
@@ -10,7 +10,7 @@
*/
/dts-v1/;
-#include "dbx5x0.dtsi"
+#include "ste-dbx5x0.dtsi"
/ {
model = "Calao Systems Snowball platform with device tree";
@@ -165,34 +165,6 @@
status = "okay";
};
- i2c@80004000 {
- tc3589x@42 {
- //compatible = "tc3589x";
- reg = <0x42>;
- gpios = <&gpio6 25 0x4>;
- interrupt-parent = <&gpio6>;
- };
- tps61052@33 {
- //compatible = "tps61052";
- reg = <0x33>;
- };
- };
-
- i2c@80128000 {
- lp5521@33 {
- // compatible = "lp5521";
- reg = <0x33>;
- };
- lp5521@34 {
- // compatible = "lp5521";
- reg = <0x34>;
- };
- bh1780@29 {
- // compatible = "rohm,bh1780gli";
- reg = <0x33>;
- };
- };
-
cpufreq-cooling {
status = "okay";
};
@@ -310,6 +282,20 @@
compatible = "stericsson,ab8500-gpio";
};
+ ext_regulators: ab8500-ext-regulators {
+ ab8500_ext1_reg: ab8500_ext1 {
+ regulator-name = "ab8500-ext-supply1";
+ };
+
+ ab8500_ext2_reg_reg: ab8500_ext2 {
+ regulator-name = "ab8500-ext-supply2";
+ };
+
+ ab8500_ext3_reg_reg: ab8500_ext3 {
+ regulator-name = "ab8500-ext-supply3";
+ };
+ };
+
ab8500-regulators {
ab8500_ldo_aux1_reg: ab8500_ldo_aux1 {
regulator-name = "V-DISPLAY";
diff --git a/arch/arm/boot/dts/stuib.dtsi b/arch/arm/boot/dts/ste-stuib.dtsi
similarity index 100%
rename from arch/arm/boot/dts/stuib.dtsi
rename to arch/arm/boot/dts/ste-stuib.dtsi
diff --git a/arch/arm/boot/dts/stih41x.dtsi b/arch/arm/boot/dts/stih41x.dtsi
index 7321403..f5b9898 100644
--- a/arch/arm/boot/dts/stih41x.dtsi
+++ b/arch/arm/boot/dts/stih41x.dtsi
@@ -6,10 +6,12 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
+ device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
};
cpu@1 {
+ device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
};
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
new file mode 100644
index 0000000..eb4d73b
--- /dev/null
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -0,0 +1,101 @@
+/*
+ * Copyright 2013 Emilio López
+ *
+ * Emilio López <emilio@elopez.com.ar>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun4i-a10.dtsi"
+
+/ {
+ model = "Mele A1000";
+ compatible = "mele,a1000", "allwinner,sun4i-a10";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ soc@01c00000 {
+ emac: ethernet@01c0b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+ };
+
+ mdio@01c0b080 {
+ phy-supply = <®_emac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ pinctrl@01c20800 {
+ emac_power_pin_a1000: emac_power_pin@0 {
+ allwinner,pins = "PH15";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ led_pins_a1000: led_pins@0 {
+ allwinner,pins = "PH10", "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_a1000>;
+
+ red {
+ label = "a1000:red:usr";
+ gpios = <&pio 7 10 0>;
+ };
+
+ blue {
+ label = "a1000:blue:usr";
+ gpios = <&pio 7 20 0>;
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_emac_3v3: emac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_power_pin_a1000>;
+ regulator-name = "emac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ gpio = <&pio 7 15 0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 757c4cd..425a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -26,7 +26,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
@@ -76,12 +76,12 @@
pinctrl-0 = <&led_pins_cubieboard>;
blue {
- label = "cubieboard::blue";
+ label = "cubieboard:blue:usr";
gpios = <&pio 7 21 0>; /* LED1 */
};
green {
- label = "cubieboard::green";
+ label = "cubieboard:green:usr";
gpios = <&pio 7 20 0>; /* LED2 */
linux,default-trigger = "heartbeat";
};
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 3514b37..b3ae51f 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index 078ed7f..0c1447c 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
uart0: serial@01c28000 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins_a>;
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index b2bd6e1..c32770a 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -160,11 +160,10 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet@01c0b000 {
diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
index 64dc0c4..3c9f8b3 100644
--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts
@@ -18,7 +18,7 @@
model = "Olimex A10s-Olinuxino Micro";
compatible = "olimex,a10s-olinuxino-micro", "allwinner,sun5i-a10s";
- soc@01c20000 {
+ soc@01c00000 {
emac: ethernet@01c0b000 {
pinctrl-names = "default";
pinctrl-0 = <&emac_pins_a>;
@@ -60,6 +60,31 @@
pinctrl-0 = <&uart3_pins_a>;
status = "okay";
};
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+
+ at24@50 {
+ compatible = "at,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ read-only;
+ };
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
};
leds {
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 2307ce8..ee0ff9b 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -157,11 +157,10 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
emac: ethernet@01c0b000 {
@@ -229,6 +228,27 @@
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ i2c0_pins_a: i2c0@0 {
+ allwinner,pins = "PB0", "PB1";
+ allwinner,function = "i2c0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c1_pins_a: i2c1@0 {
+ allwinner,pins = "PB15", "PB16";
+ allwinner,function = "i2c1";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ i2c2_pins_a: i2c2@0 {
+ allwinner,pins = "PB17", "PB18";
+ allwinner,function = "i2c2";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
timer@01c20c00 {
@@ -282,5 +302,38 @@
clocks = <&apb1_gates 19>;
status = "disabled";
};
+
+ i2c0: i2c@01c2ac00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2ac00 0x400>;
+ interrupts = <7>;
+ clocks = <&apb1_gates 0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@01c2b000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b000 0x400>;
+ interrupts = <8>;
+ clocks = <&apb1_gates 1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@01c2b400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "allwinner,sun4i-i2c";
+ reg = <0x01c2b400 0x400>;
+ interrupts = <9>;
+ clocks = <&apb1_gates 2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
index 80497e3..9e508dc 100644
--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
+++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts
@@ -22,7 +22,7 @@
bootargs = "earlyprintk console=ttyS0,115200";
};
- soc@01c20000 {
+ soc@01c00000 {
pinctrl@01c20800 {
led_pins_olinuxino: led_pins@0 {
allwinner,pins = "PG9";
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index 7363211..f6091dc 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -150,11 +150,10 @@
};
};
- soc@01c20000 {
+ soc@01c00000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- reg = <0x01c20000 0x300000>;
ranges;
intc: interrupt-controller@01c20400 {
diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts
new file mode 100644
index 0000000..99c4b18
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts
@@ -0,0 +1,30 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun6i-a31.dtsi"
+
+/ {
+ model = "WITS A31 Colombus Evaluation Board";
+ compatible = "wits,colombus", "allwinner,sun6i-a31";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc@01c00000 {
+ uart0: serial@01c28000 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
new file mode 100644
index 0000000..4d076ec
--- /dev/null
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -0,0 +1,156 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc: oscillator {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-timer";
+ reg = <0x01c20c00 0xa0>;
+ interrupts = <0 18 1>,
+ <0 19 1>,
+ <0 20 1>,
+ <0 21 1>,
+ <0 22 1>;
+ clocks = <&osc>;
+ };
+
+ wdt1: watchdog@01c20ca0 {
+ compatible = "allwinner,sun6i-wdt";
+ reg = <0x01c20ca0 0x20>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <0 0 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <0 1 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <0 2 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <0 3 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <0 4 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ uart5: serial@01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <0 5 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 0xf04>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
new file mode 100644
index 0000000..d339584
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+
+/ {
+ model = "Olimex A20-Olinuxino Micro";
+ compatible = "olimex,a20-olinuxino-micro", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ uart0: serial@01c28000 {
+ status = "okay";
+ };
+
+ uart6: serial@01c29800 {
+ status = "okay";
+ };
+
+ uart7: serial@01c29c00 {
+ status = "okay";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
new file mode 100644
index 0000000..3339151
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0>;
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <1>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc24M: osc24M@01c20050 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ osc32k: osc32k {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ };
+ };
+
+ soc@01c00000 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ timer@01c20c00 {
+ compatible = "allwinner,sun4i-timer";
+ reg = <0x01c20c00 0x90>;
+ interrupts = <0 22 1>,
+ <0 23 1>,
+ <0 24 1>,
+ <0 25 1>,
+ <0 67 1>,
+ <0 68 1>;
+ clocks = <&osc24M>;
+ };
+
+ wdt: watchdog@01c20c90 {
+ compatible = "allwinner,sun4i-wdt";
+ reg = <0x01c20c90 0x10>;
+ };
+
+ uart0: serial@01c28000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28000 0x400>;
+ interrupts = <0 1 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart1: serial@01c28400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28400 0x400>;
+ interrupts = <0 2 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart2: serial@01c28800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28800 0x400>;
+ interrupts = <0 3 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart3: serial@01c28c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c28c00 0x400>;
+ interrupts = <0 4 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart4: serial@01c29000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29000 0x400>;
+ interrupts = <0 17 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart5: serial@01c29400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29400 0x400>;
+ interrupts = <0 18 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart6: serial@01c29800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29800 0x400>;
+ interrupts = <0 19 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ uart7: serial@01c29c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x01c29c00 0x400>;
+ interrupts = <0 20 1>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@01c81000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c81000 0x1000>,
+ <0x01c82000 0x1000>,
+ <0x01c84000 0x2000>,
+ <0x01c86000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 0xf04>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index cb640eb..6023028 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -791,7 +791,7 @@
regulator-boot-on;
};
- dcdc3 {
+ tps65090_dcdc3_reg: dcdc3 {
regulator-name = "vdd-ao";
regulator-always-on;
regulator-boot-on;
@@ -836,6 +836,182 @@
};
};
};
+
+ palmas: tps65913 {
+ compatible = "ti,palmas";
+ reg = <0x58>;
+ interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ palmas_gpio: gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ pmic {
+ compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
+ smps1-in-supply = <&tps65090_dcdc3_reg>;
+ smps3-in-supply = <&tps65090_dcdc3_reg>;
+ smps4-in-supply = <&tps65090_dcdc2_reg>;
+ smps7-in-supply = <&tps65090_dcdc2_reg>;
+ smps8-in-supply = <&tps65090_dcdc2_reg>;
+ smps9-in-supply = <&tps65090_dcdc2_reg>;
+ ldo1-in-supply = <&tps65090_dcdc2_reg>;
+ ldo2-in-supply = <&tps65090_dcdc2_reg>;
+ ldo3-in-supply = <&palmas_smps3_reg>;
+ ldo4-in-supply = <&tps65090_dcdc2_reg>;
+ ldo5-in-supply = <&vdd_ac_bat_reg>;
+ ldo6-in-supply = <&tps65090_dcdc2_reg>;
+ ldo7-in-supply = <&tps65090_dcdc2_reg>;
+ ldo8-in-supply = <&tps65090_dcdc3_reg>;
+ ldo9-in-supply = <&palmas_smps9_reg>;
+ ldoln-in-supply = <&tps65090_dcdc1_reg>;
+ ldousb-in-supply = <&tps65090_dcdc1_reg>;
+
+ regulators {
+ smps12 {
+ regulator-name = "vddio-ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ palmas_smps3_reg: smps3 {
+ regulator-name = "vddio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps457 {
+ regulator-name = "vdd-core";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps8 {
+ regulator-name = "avdd-pll";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ palmas_smps9_reg: smps9 {
+ regulator-name = "sdhci-vdd-sd-slot";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo1 {
+ regulator-name = "avdd-cam1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo2 {
+ regulator-name = "avdd-cam2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo3 {
+ regulator-name = "avdd-dsi-csi";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo4 {
+ regulator-name = "vpp-fuse";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6 {
+ regulator-name = "vdd-sensor-2v85";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ ldo7 {
+ regulator-name = "vdd-af-cam1";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo8 {
+ regulator-name = "vdd-rtc";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,enable-ldo8-tracking;
+ };
+
+ ldo9 {
+ regulator-name = "vddio-sdmmc-2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln {
+ regulator-name = "hvdd-usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldousb {
+ regulator-name = "avdd-usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen1 {
+ regulator-name = "rail-3v3";
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ regen2 {
+ regulator-name = "rail-5v0";
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+
+ rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&palmas>;
+ interrupts = <8 0>;
+ };
+ };
};
spi@7000da00 {
@@ -850,6 +1026,13 @@
pmc {
nvidia,invert-interrupt;
+ nvidia,suspend-mode = <1>;
+ nvidia,cpu-pwr-good-time = <500>;
+ nvidia,cpu-pwr-off-time = <300>;
+ nvidia,core-pwr-good-time = <641 3845>;
+ nvidia,core-pwr-off-time = <61036>;
+ nvidia,core-power-req-active-high;
+ nvidia,sys-clock-req-active-high;
};
ahub {
@@ -870,6 +1053,15 @@
non-removable;
};
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ status = "okay";
+ vbus-supply = <&usb3_vbus_reg>;
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -883,6 +1075,35 @@
};
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ home {
+ label = "Home";
+ gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+ linux,code = <102>; /* KEY_HOME */
+ };
+
+ power {
+ label = "Power";
+ gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
+ linux,code = <116>; /* KEY_POWER */
+ gpio-key,wakeup;
+ };
+
+ volume_down {
+ label = "Volume Down";
+ gpios = <&gpio TEGRA_GPIO(R, 1) GPIO_ACTIVE_LOW>;
+ linux,code = <114>; /* KEY_VOLUMEDOWN */
+ };
+
+ volume_up {
+ label = "Volume Up";
+ gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+ linux,code = <115>; /* KEY_VOLUMEUP */
+ };
+ };
+
regulators {
compatible = "simple-bus";
#address-cells = <1>;
@@ -951,6 +1172,16 @@
gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
vin-supply = <&tps65090_dcdc1_reg>;
};
+
+ vdd_cam_1v8_reg: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ regulator-name = "vdd_cam_1v8_reg";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ enable-active-high;
+ gpio = <&palmas_gpio 6 0>;
+ };
};
sound {
@@ -964,7 +1195,9 @@
"Speakers", "SPORP",
"Speakers", "SPORN",
"Speakers", "SPOLP",
- "Speakers", "SPOLN";
+ "Speakers", "SPOLN",
+ "Mic Jack", "MICBIAS1",
+ "IN2P", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra114-pluto.dts b/arch/arm/boot/dts/tegra114-pluto.dts
deleted file mode 100644
index d5f8d3e..0000000
--- a/arch/arm/boot/dts/tegra114-pluto.dts
+++ /dev/null
@@ -1,33 +0,0 @@
-/dts-v1/;
-
-#include "tegra114.dtsi"
-
-/ {
- model = "NVIDIA Tegra114 Pluto evaluation board";
- compatible = "nvidia,pluto", "nvidia,tegra114";
-
- memory {
- reg = <0x80000000 0x40000000>;
- };
-
- serial@70006300 {
- status = "okay";
- };
-
- pmc {
- nvidia,invert-interrupt;
- };
-
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- clk32k_in: clock {
- compatible = "fixed-clock";
- reg=<0>;
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
- };
-};
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index abf6c40d..2905145 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -430,6 +430,68 @@
status = "disable";
};
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-ehci", "usb-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA114_CLK_USBD>;
+ nvidia,phy = <&phy1>;
+ status = "disabled";
+ };
+
+ phy1: usb-phy@7d000000 {
+ compatible = "nvidia,tegra30-usb-phy";
+ reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA114_CLK_USBD>,
+ <&tegra_car TEGRA114_CLK_PLL_U>,
+ <&tegra_car TEGRA114_CLK_USBD>;
+ clock-names = "reg", "pll_u", "utmi-pads";
+ nvidia,hssync-start-delay = <0>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <9>;
+ nvidia,xcvr-lsfslew = <0>;
+ nvidia,xcvr-lsrslew = <3>;
+ nvidia,hssquelch-level = <2>;
+ nvidia,hsdiscon-level = <5>;
+ nvidia,xcvr-hsslew = <12>;
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra30-ehci", "usb-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA114_CLK_USB3>;
+ nvidia,phy = <&phy3>;
+ status = "disabled";
+ };
+
+ phy3: usb-phy@7d008000 {
+ compatible = "nvidia,tegra30-usb-phy";
+ reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA114_CLK_USB3>,
+ <&tegra_car TEGRA114_CLK_PLL_U>,
+ <&tegra_car TEGRA114_CLK_USBD>;
+ clock-names = "reg", "pll_u", "utmi-pads";
+ nvidia,hssync-start-delay = <0>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <9>;
+ nvidia,xcvr-lsfslew = <0>;
+ nvidia,xcvr-lsrslew = <3>;
+ nvidia,hssquelch-level = <2>;
+ nvidia,hsdiscon-level = <5>;
+ nvidia,xcvr-hsslew = <12>;
+ status = "disabled";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 2fcb3f2..d5c9bca 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
@@ -363,7 +363,7 @@
};
pmc {
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -457,6 +457,7 @@
};
usb-phy@c5004000 {
+ status = "okay";
nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
GPIO_ACTIVE_LOW>;
};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index d9f89cd..e156ab3 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -335,7 +335,7 @@
regulator-always-on;
};
- ldo0 {
+ pci_clk_reg: ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -417,7 +417,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -425,6 +425,20 @@
nvidia,sys-clock-req-active-high;
};
+ pcie-controller {
+ pex-clk-supply = <&pci_clk_reg>;
+ vdd-supply = <&pci_vdd_reg>;
+ status = "okay";
+
+ pci@1,0 {
+ status = "okay";
+ };
+
+ pci@2,0 {
+ status = "okay";
+ };
+ };
+
usb@c5000000 {
status = "okay";
};
@@ -643,7 +657,7 @@
enable-active-high;
};
- regulator@3 {
+ pci_vdd_reg: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "vdd_1v05";
@@ -651,8 +665,6 @@
regulator-max-microvolt = <1050000>;
gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
enable-active-high;
- /* Hack until board-harmony-pcie.c is removed */
- status = "disabled";
};
regulator@4 {
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index cfd1276..8d71fc9 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -417,7 +417,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <0>;
nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index 365760b..f44a9b8 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -518,7 +518,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -829,7 +829,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 24 0>; /* PD0 */
+ gpio = <&gpio TEGRA_GPIO(D, 0) 0>;
};
};
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi
index c54faae..7726dab 100644
--- a/arch/arm/boot/dts/tegra20-tamonten.dtsi
+++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi
@@ -366,7 +366,7 @@
regulator-always-on;
};
- ldo0 {
+ pci_clk_reg: ldo0 {
regulator-name = "vdd_ldo0,vddio_pex_clk";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -459,7 +459,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -467,6 +467,11 @@
nvidia,sys-clock-req-active-high;
};
+ pcie-controller {
+ pex-clk-supply = <&pci_clk_reg>;
+ vdd-supply = <&pci_vdd_reg>;
+ };
+
usb@c5008000 {
status = "okay";
};
@@ -509,5 +514,15 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
+
+ pci_vdd_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "vdd_1v05";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ gpio = <&pmic 2 0>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts
index c572c43..3ada3cb 100644
--- a/arch/arm/boot/dts/tegra20-tec.dts
+++ b/arch/arm/boot/dts/tegra20-tec.dts
@@ -32,6 +32,14 @@
};
};
+ pcie-controller {
+ status = "okay";
+
+ pci@1,0 {
+ status = "okay";
+ };
+ };
+
sound {
compatible = "ad,tegra-audio-wm8903-tec",
"nvidia,tegra-audio-wm8903";
diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts
index ed4b901..22e227f 100644
--- a/arch/arm/boot/dts/tegra20-trimslice.dts
+++ b/arch/arm/boot/dts/tegra20-trimslice.dts
@@ -302,7 +302,7 @@
};
pmc {
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <5000>;
nvidia,cpu-pwr-off-time = <5000>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -310,6 +310,16 @@
nvidia,sys-clock-req-active-high;
};
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&pci_clk_reg>;
+ vdd-supply = <&pci_vdd_reg>;
+
+ pci@1,0 {
+ status = "okay";
+ };
+ };
+
usb@c5000000 {
status = "okay";
nvidia,vbus-gpio = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>;
@@ -411,7 +421,25 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio 170 0>; /* PV2 */
+ gpio = <&gpio TEGRA_GPIO(V, 2) 0>;
+ };
+
+ pci_clk_reg: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "pci_clk";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ pci_vdd_reg: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "pci_vdd";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
};
};
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index 7f8c28d..aab872c 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -494,7 +494,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <100>;
nvidia,core-pwr-good-time = <3845 3845>;
diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts
index ab67c94..3899cae 100644
--- a/arch/arm/boot/dts/tegra20-whistler.dts
+++ b/arch/arm/boot/dts/tegra20-whistler.dts
@@ -497,7 +497,7 @@
pmc {
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <1000>;
nvidia,core-pwr-good-time = <0 3845>;
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index 9653fd8..3add9ac2 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -455,6 +455,61 @@
#size-cells = <0>;
};
+ pcie-controller {
+ compatible = "nvidia,tegra20-pcie";
+ device_type = "pci";
+ reg = <0x80003000 0x00000800 /* PADS registers */
+ 0x80003800 0x00000200 /* AFI registers */
+ 0x90000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
+ GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x80000000 0x80000000 0 0x00001000 /* port 0 registers */
+ 0x82000000 0 0x80001000 0x80001000 0 0x00001000 /* port 1 registers */
+ 0x81000000 0 0 0x82000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0xa0000000 0xa0000000 0 0x08000000 /* non-prefetchable memory */
+ 0xc2000000 0 0xa8000000 0xa8000000 0 0x18000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car TEGRA20_CLK_PEX>,
+ <&tegra_car TEGRA20_CLK_AFI>,
+ <&tegra_car TEGRA20_CLK_PCIE_XCLK>,
+ <&tegra_car TEGRA20_CLK_PLL_E>;
+ clock-names = "pex", "afi", "pcie_xclk", "pll_e";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x80000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x80001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
usb@c5000000 {
compatible = "nvidia,tegra20-ehci", "usb-ehci";
reg = <0xc5000000 0x4000>;
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 87c5f7b..08cad69 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -10,6 +10,40 @@
reg = <0x80000000 0x7ff00000>;
};
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&sys_3v3_pexs_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
+
+ pci@1,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <2>;
+ };
+ };
+
+ host1x {
+ hdmi {
+ status = "okay";
+
+ vdd-supply = <&sys_3v3_reg>;
+ pll-supply = <&vio_reg>;
+
+ nvidia,hpd-gpio =
+ <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
+ nvidia,ddc-i2c-bus = <&hdmiddc>;
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -76,6 +110,11 @@
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
+ pex_l1_prsnt_n_pdd4 {
+ nvidia,pins = "pex_l1_prsnt_n_pdd4",
+ "pex_l1_clkreq_n_pdd6";
+ nvidia,pull = <2>;
+ };
sdio3 {
nvidia,pins = "drive_sdio3";
nvidia,high-speed-mode = <0>;
@@ -85,6 +124,10 @@
nvidia,slew-rate-rising = <1>;
nvidia,slew-rate-falling = <1>;
};
+ gpv {
+ nvidia,pins = "drive_gpv";
+ nvidia,pull-up-strength = <16>;
+ };
};
};
@@ -107,7 +150,7 @@
clock-frequency = <100000>;
};
- i2c@7000c700 {
+ hdmiddc: i2c@7000c700 {
status = "okay";
clock-frequency = <100000>;
};
@@ -262,7 +305,7 @@
pmc {
status = "okay";
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -285,6 +328,15 @@
non-removable;
};
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ vbus-supply = <&usb3_vbus_reg>;
+ status = "okay";
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
@@ -357,7 +409,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(I, 4) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA_GPIO(DD, 6) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -369,7 +421,7 @@
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
- gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
+ gpio = <&gpio TEGRA_GPIO(DD, 4) GPIO_ACTIVE_HIGH>;
gpio-open-drain;
vin-supply = <&vdd_5v_in_reg>;
};
@@ -421,7 +473,9 @@
nvidia,audio-routing =
"Headphones", "HPOR",
- "Headphones", "HPOL";
+ "Headphones", "HPOL",
+ "Mic Jack", "MICBIAS1",
+ "IN2P", "Mic Jack";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&rt5640>;
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index f65b53d..e19dbf2 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -31,6 +31,26 @@
reg = <0x80000000 0x40000000>;
};
+ pcie-controller {
+ status = "okay";
+ pex-clk-supply = <&pex_hvdd_3v3_reg>;
+ vdd-supply = <&ldo1_reg>;
+ avdd-supply = <&ldo2_reg>;
+
+ pci@1,0 {
+ nvidia,num-lanes = <4>;
+ };
+
+ pci@2,0 {
+ nvidia,num-lanes = <1>;
+ };
+
+ pci@3,0 {
+ status = "okay";
+ nvidia,num-lanes = <1>;
+ };
+ };
+
pinmux {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
@@ -173,19 +193,6 @@
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
- tps62361 {
- compatible = "ti,tps62361";
- reg = <0x60>;
-
- regulator-name = "tps62361-vout";
- regulator-min-microvolt = <500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-always-on;
- ti,vsel0-state-high;
- ti,vsel1-state-high;
- };
-
pmic: tps65911@2d {
compatible = "ti,tps65911";
reg = <0x2d>;
@@ -286,6 +293,26 @@
};
};
};
+
+ nct1008 {
+ compatible = "onnn,nct1008";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ tps62361 {
+ compatible = "ti,tps62361";
+ reg = <0x60>;
+
+ regulator-name = "tps62361-vout";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ };
};
spi@7000da00 {
@@ -307,7 +334,7 @@
pmc {
status = "okay";
nvidia,invert-interrupt;
- nvidia,suspend-mode = <2>;
+ nvidia,suspend-mode = <1>;
nvidia,cpu-pwr-good-time = <2000>;
nvidia,cpu-pwr-off-time = <200>;
nvidia,core-pwr-good-time = <3845 3845>;
@@ -330,6 +357,15 @@
non-removable;
};
+ usb@7d008000 {
+ status = "okay";
+ };
+
+ usb-phy@7d008000 {
+ vbus-supply = <&usb3_vbus_reg>;
+ status = "okay";
+ };
+
clocks {
compatible = "simple-bus";
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index d8783f0..0022c12 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -16,6 +16,76 @@
serial4 = &uarte;
};
+ pcie-controller {
+ compatible = "nvidia,tegra30-pcie";
+ device_type = "pci";
+ reg = <0x00003000 0x00000800 /* PADS registers */
+ 0x00003800 0x00000200 /* AFI registers */
+ 0x10000000 0x10000000>; /* configuration space */
+ reg-names = "pads", "afi", "cs";
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH /* controller interrupt */
+ GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */
+ interrupt-names = "intr", "msi";
+
+ bus-range = <0x00 0xff>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges = <0x82000000 0 0x00000000 0x00000000 0 0x00001000 /* port 0 configuration space */
+ 0x82000000 0 0x00001000 0x00001000 0 0x00001000 /* port 1 configuration space */
+ 0x82000000 0 0x00004000 0x00004000 0 0x00001000 /* port 2 configuration space */
+ 0x81000000 0 0 0x02000000 0 0x00010000 /* downstream I/O */
+ 0x82000000 0 0x20000000 0x20000000 0 0x08000000 /* non-prefetchable memory */
+ 0xc2000000 0 0x28000000 0x28000000 0 0x18000000>; /* prefetchable memory */
+
+ clocks = <&tegra_car TEGRA30_CLK_PCIE>,
+ <&tegra_car TEGRA30_CLK_AFI>,
+ <&tegra_car TEGRA30_CLK_PCIEX>,
+ <&tegra_car TEGRA30_CLK_PLL_E>,
+ <&tegra_car TEGRA30_CLK_CML0>;
+ clock-names = "pex", "afi", "pcie_xclk", "pll_e", "cml";
+ status = "disabled";
+
+ pci@1,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82000800 0 0x00000000 0 0x1000>;
+ reg = <0x000800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@2,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001000 0 0x00001000 0 0x1000>;
+ reg = <0x001000 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+
+ pci@3,0 {
+ device_type = "pci";
+ assigned-addresses = <0x82001800 0 0x00004000 0 0x1000>;
+ reg = <0x001800 0 0 0 0>;
+ status = "disabled";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges;
+
+ nvidia,num-lanes = <2>;
+ };
+ };
+
host1x {
compatible = "nvidia,tegra30-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
@@ -561,6 +631,92 @@
status = "disabled";
};
+ usb@7d000000 {
+ compatible = "nvidia,tegra30-ehci", "usb-ehci";
+ reg = <0x7d000000 0x4000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA30_CLK_USBD>;
+ nvidia,needs-double-reset;
+ nvidia,phy = <&phy1>;
+ status = "disabled";
+ };
+
+ phy1: usb-phy@7d000000 {
+ compatible = "nvidia,tegra30-usb-phy";
+ reg = <0x7d000000 0x4000 0x7d000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA30_CLK_USBD>,
+ <&tegra_car TEGRA30_CLK_PLL_U>,
+ <&tegra_car TEGRA30_CLK_USBD>;
+ clock-names = "reg", "pll_u", "utmi-pads";
+ nvidia,hssync-start-delay = <9>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <51>;
+ nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-lsfslew = <1>;
+ nvidia,xcvr-lsrslew = <1>;
+ nvidia,xcvr-hsslew = <32>;
+ nvidia,hssquelch-level = <2>;
+ nvidia,hsdiscon-level = <5>;
+ status = "disabled";
+ };
+
+ usb@7d004000 {
+ compatible = "nvidia,tegra30-ehci", "usb-ehci";
+ reg = <0x7d004000 0x4000>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "ulpi";
+ clocks = <&tegra_car TEGRA30_CLK_USB2>;
+ nvidia,phy = <&phy2>;
+ status = "disabled";
+ };
+
+ phy2: usb-phy@7d004000 {
+ compatible = "nvidia,tegra30-usb-phy";
+ reg = <0x7d004000 0x4000>;
+ phy_type = "ulpi";
+ clocks = <&tegra_car TEGRA30_CLK_USB2>,
+ <&tegra_car TEGRA30_CLK_PLL_U>,
+ <&tegra_car TEGRA30_CLK_CDEV2>;
+ clock-names = "reg", "pll_u", "ulpi-link";
+ status = "disabled";
+ };
+
+ usb@7d008000 {
+ compatible = "nvidia,tegra30-ehci", "usb-ehci";
+ reg = <0x7d008000 0x4000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA30_CLK_USB3>;
+ nvidia,phy = <&phy3>;
+ status = "disabled";
+ };
+
+ phy3: usb-phy@7d008000 {
+ compatible = "nvidia,tegra30-usb-phy";
+ reg = <0x7d008000 0x4000 0x7d000000 0x4000>;
+ phy_type = "utmi";
+ clocks = <&tegra_car TEGRA30_CLK_USB3>,
+ <&tegra_car TEGRA30_CLK_PLL_U>,
+ <&tegra_car TEGRA30_CLK_USBD>;
+ clock-names = "reg", "pll_u", "utmi-pads";
+ nvidia,hssync-start-delay = <0>;
+ nvidia,idle-wait-delay = <17>;
+ nvidia,elastic-limit = <16>;
+ nvidia,term-range-adj = <6>;
+ nvidia,xcvr-setup = <51>;
+ nvidia.xcvr-setup-use-fuses;
+ nvidia,xcvr-lsfslew = <2>;
+ nvidia,xcvr-lsrslew = <2>;
+ nvidia,xcvr-hsslew = <32>;
+ nvidia,hssquelch-level = <2>;
+ nvidia,hsdiscon-level = <5>;
+ status = "disabled";
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/u9540.dts b/arch/arm/boot/dts/u9540.dts
deleted file mode 100644
index 95892ec..0000000
--- a/arch/arm/boot/dts/u9540.dts
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright 2012 ST-Ericsson AB
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-/include/ "dbx5x0.dtsi"
-
-/ {
- model = "ST-Ericsson U9540 platform with Device Tree";
- compatible = "st-ericsson,u9540";
-
- memory {
- reg = <0x00000000 0x20000000>;
- };
-
- soc-u9500 {
- uart@80120000 {
- status = "okay";
- };
-
- uart@80121000 {
- status = "okay";
- };
-
- uart@80007000 {
- status = "okay";
- };
-
- // External Micro SD slot
- sdi0_per1@80126000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <4>;
- mmc-cap-sd-highspeed;
- mmc-cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux3_reg>;
-
- cd-gpios = <&gpio7 6 0x4>; // 230
- cd-inverted;
-
- status = "okay";
- };
-
-
- // WLAN SDIO channel
- sdi1_per2@80118000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <50000000>;
- bus-width = <4>;
-
- status = "okay";
- };
-
- // On-board eMMC
- sdi4_per2@80114000 {
- arm,primecell-periphid = <0x10480180>;
- max-frequency = <100000000>;
- bus-width = <8>;
- mmc-cap-mmc-highspeed;
- vmmc-supply = <&ab8500_ldo_aux2_reg>;
-
- status = "okay";
- };
- };
-};
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 6f54a64..e32b92b 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -41,8 +41,8 @@
L2: cache-controller {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
- arm,data-latency = <2 3 2>;
- arm,tag-latency = <2 3 2>;
+ arm,data-latency = <3 2 2>;
+ arm,tag-latency = <2 2 2>;
cache-unified;
cache-level = <2>;
};
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index 614e41e..905efc8 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -121,8 +121,7 @@
bool
config MSM_GPIOMUX
- depends on !(ARCH_MSM8X60 || ARCH_MSM8960)
- bool "MSM V1 TLMM GPIOMUX architecture"
+ bool
help
Support for MSM V1 TLMM GPIOMUX architecture.
diff --git a/arch/arm/mach-msm/gpiomux-v1.c b/arch/arm/mach-msm/gpiomux-v1.c
deleted file mode 100644
index 27de2ab..0000000
--- a/arch/arm/mach-msm/gpiomux-v1.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 and
- * only version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
- * 02110-1301, USA.
- */
-#include <linux/kernel.h>
-#include "gpiomux.h"
-#include "proc_comm.h"
-
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val)
-{
- unsigned tlmm_config = (val & ~GPIOMUX_CTL_MASK) |
- ((gpio & 0x3ff) << 4);
- unsigned tlmm_disable = 0;
- int rc;
-
- rc = msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX,
- &tlmm_config, &tlmm_disable);
- if (rc)
- pr_err("%s: unexpected proc_comm failure %d: %08x %08x\n",
- __func__, rc, tlmm_config, tlmm_disable);
-}
diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h
index 8e82f41..4410d77 100644
--- a/arch/arm/mach-msm/gpiomux.h
+++ b/arch/arm/mach-msm/gpiomux.h
@@ -73,16 +73,6 @@
int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
gpiomux_config_t suspended);
-
-/* Architecture-internal function for use by the framework only.
- * This function can assume the following:
- * - the gpio value has passed a bounds-check
- * - the gpiomux spinlock has been obtained
- *
- * This function is not for public consumption. External users
- * should use msm_gpiomux_write.
- */
-void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val);
#else
static inline int msm_gpiomux_write(unsigned gpio,
gpiomux_config_t active,
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 5981c3d..4d42da4 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -27,6 +27,7 @@
select NOMADIK_8815
select I2C
select I2C_ALGOBIT
+ select I2C_NOMADIK
endmenu
endif
diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 393aeef..043e570 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -42,7 +42,7 @@
/* Using generic display panel */
static struct tfp410_platform_data omap4_dvi_panel = {
- .i2c_bus_num = 3,
+ .i2c_bus_num = 2,
.power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO,
};
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index 5cc9287..f99f68e 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -129,6 +129,7 @@
struct device_node *node = pdev->dev.of_node;
const char *oh_name;
int oh_cnt, i, ret = 0;
+ bool device_active = false;
oh_cnt = of_property_count_strings(node, "ti,hwmods");
if (oh_cnt <= 0) {
@@ -152,6 +153,8 @@
goto odbfd_exit1;
}
hwmods[i] = oh;
+ if (oh->flags & HWMOD_INIT_NO_IDLE)
+ device_active = true;
}
od = omap_device_alloc(pdev, hwmods, oh_cnt);
@@ -172,6 +175,11 @@
pdev->dev.pm_domain = &omap_device_pm_domain;
+ if (device_active) {
+ omap_device_enable(pdev);
+ pm_runtime_set_active(&pdev->dev);
+ }
+
odbfd_exit1:
kfree(hwmods);
odbfd_exit:
@@ -842,6 +850,7 @@
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od = to_omap_device(pdev);
+ int i;
if (!od)
return 0;
@@ -850,6 +859,15 @@
* If omap_device state is enabled, but has no driver bound,
* idle it.
*/
+
+ /*
+ * Some devices (like memory controllers) are always kept
+ * enabled, and should not be idled even with no drivers.
+ */
+ for (i = 0; i < od->hwmods_cnt; i++)
+ if (od->hwmods[i]->flags & HWMOD_INIT_NO_IDLE)
+ return 0;
+
if (od->_driver_status != BUS_NOTIFY_BOUND_DRIVER) {
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
dev_warn(dev, "%s: enabled but no driver. Idling\n",
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 7341eff..7f4db12 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2386,7 +2386,7 @@
np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
if (np)
- va_start = of_iomap(np, 0);
+ va_start = of_iomap(np, oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index aab33fd..e1482a9 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -95,6 +95,54 @@
#define MODULEMODE_HWCTRL 1
#define MODULEMODE_SWCTRL 2
+#define DEBUG_OMAP2UART1_FLAGS 0
+#define DEBUG_OMAP2UART2_FLAGS 0
+#define DEBUG_OMAP2UART3_FLAGS 0
+#define DEBUG_OMAP3UART3_FLAGS 0
+#define DEBUG_OMAP3UART4_FLAGS 0
+#define DEBUG_OMAP4UART3_FLAGS 0
+#define DEBUG_OMAP4UART4_FLAGS 0
+#define DEBUG_TI81XXUART1_FLAGS 0
+#define DEBUG_TI81XXUART2_FLAGS 0
+#define DEBUG_TI81XXUART3_FLAGS 0
+#define DEBUG_AM33XXUART1_FLAGS 0
+
+#define DEBUG_OMAPUART_FLAGS (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET)
+
+#if defined(CONFIG_DEBUG_OMAP2UART1)
+#undef DEBUG_OMAP2UART1_FLAGS
+#define DEBUG_OMAP2UART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART2)
+#undef DEBUG_OMAP2UART2_FLAGS
+#define DEBUG_OMAP2UART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP2UART3)
+#undef DEBUG_OMAP2UART3_FLAGS
+#define DEBUG_OMAP2UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART3)
+#undef DEBUG_OMAP3UART3_FLAGS
+#define DEBUG_OMAP3UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP3UART4)
+#undef DEBUG_OMAP3UART4_FLAGS
+#define DEBUG_OMAP3UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART3)
+#undef DEBUG_OMAP4UART3_FLAGS
+#define DEBUG_OMAP4UART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_OMAP4UART4)
+#undef DEBUG_OMAP4UART4_FLAGS
+#define DEBUG_OMAP4UART4_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART1)
+#undef DEBUG_TI81XXUART1_FLAGS
+#define DEBUG_TI81XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART2)
+#undef DEBUG_TI81XXUART2_FLAGS
+#define DEBUG_TI81XXUART2_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_TI81XXUART3)
+#undef DEBUG_TI81XXUART3_FLAGS
+#define DEBUG_TI81XXUART3_FLAGS DEBUG_OMAPUART_FLAGS
+#elif defined(CONFIG_DEBUG_AM33XXUART1)
+#undef DEBUG_AM33XXUART1_FLAGS
+#define DEBUG_AM33XXUART1_FLAGS DEBUG_OMAPUART_FLAGS
+#endif
/**
* struct omap_hwmod_mux_info - hwmod specific mux configuration
@@ -568,6 +616,7 @@
* @voltdm: pointer to voltage domain (filled in at runtime)
* @dev_attr: arbitrary device attributes that can be passed to the driver
* @_sysc_cache: internal-use hwmod flags
+ * @mpu_rt_idx: index of device address space for register target (for DT boot)
* @_mpu_rt_va: cached register target start address (internal use)
* @_mpu_port: cached MPU register target slave (internal use)
* @opt_clks_cnt: number of @opt_clks
@@ -617,6 +666,7 @@
struct list_head node;
struct omap_hwmod_ocp_if *_mpu_port;
u16 flags;
+ u8 mpu_rt_idx;
u8 response_lat;
u8 rst_lines_cnt;
u8 opt_clks_cnt;
diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
index d05fc7b..56cebb0 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c
@@ -512,7 +512,7 @@
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP2UART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -532,7 +532,7 @@
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP2UART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -552,7 +552,7 @@
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP2UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 28bbd56..eb2f3b9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -562,6 +562,7 @@
.clkdm_name = "cpsw_125mhz_clkdm",
.flags = (HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY),
.main_clk = "cpsw_125mhz_gclk",
+ .mpu_rt_idx = 1,
.prcm = {
.omap4 = {
.clkctrl_offs = AM33XX_CM_PER_CPGMAC0_CLKCTRL_OFFSET,
@@ -1512,7 +1513,7 @@
.name = "uart1",
.class = &uart_class,
.clkdm_name = "l4_wkup_clkdm",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_AM33XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.main_clk = "dpll_per_m2_div4_wkupdm_ck",
.prcm = {
.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index f7a3df2..0c3a427 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -490,7 +490,7 @@
.mpu_irqs = omap2_uart1_mpu_irqs,
.sdma_reqs = omap2_uart1_sdma_reqs,
.main_clk = "uart1_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_TI81XXUART1_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -509,7 +509,7 @@
.mpu_irqs = omap2_uart2_mpu_irqs,
.sdma_reqs = omap2_uart2_sdma_reqs,
.main_clk = "uart2_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_TI81XXUART2_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
@@ -528,7 +528,8 @@
.mpu_irqs = omap2_uart3_mpu_irqs,
.sdma_reqs = omap2_uart3_sdma_reqs,
.main_clk = "uart3_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP3UART3_FLAGS | DEBUG_TI81XXUART3_FLAGS |
+ HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
@@ -558,7 +559,7 @@
.mpu_irqs = uart4_mpu_irqs,
.sdma_reqs = uart4_sdma_reqs,
.main_clk = "uart4_fck",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP3UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.prcm = {
.omap2 = {
.module_offs = OMAP3430_PER_MOD,
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index d04b5e6..9c3b504 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2858,8 +2858,7 @@
.name = "uart3",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET |
- HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP4UART3_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
@@ -2875,7 +2874,7 @@
.name = "uart4",
.class = &omap44xx_uart_hwmod_class,
.clkdm_name = "l4_per_clkdm",
- .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .flags = DEBUG_OMAP4UART4_FLAGS | HWMOD_SWSUP_SIDLE_ACT,
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index f37ae96..3c70f5c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1375,7 +1375,7 @@
.name = "uart3",
.class = &omap54xx_uart_hwmod_class,
.clkdm_name = "l4per_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = DEBUG_OMAP4UART3_FLAGS,
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
@@ -1391,6 +1391,7 @@
.name = "uart4",
.class = &omap54xx_uart_hwmod_class,
.clkdm_name = "l4per_clkdm",
+ .flags = DEBUG_OMAP4UART4_FLAGS,
.main_clk = "func_48m_fclk",
.prcm = {
.omap4 = {
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 3a674de..a388f8c 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -208,17 +208,6 @@
pr_info("%s used as console in debug mode: uart%d clocks will not be gated",
uart_name, uart->num);
}
-
- /*
- * omap-uart can be used for earlyprintk logs
- * So if omap-uart is used as console then prevent
- * uart reset and idle to get logs from omap-uart
- * until uart console driver is available to take
- * care for console messages.
- * Idling or resetting omap-uart while printing logs
- * early boot logs can stall the boot-up.
- */
- oh->flags |= HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET;
}
} while (1);
diff --git a/arch/arm/mach-pxa/pxa-dt.c b/arch/arm/mach-pxa/pxa-dt.c
index 3835979..f6a2c4b 100644
--- a/arch/arm/mach-pxa/pxa-dt.c
+++ b/arch/arm/mach-pxa/pxa-dt.c
@@ -28,7 +28,7 @@
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40700000, "pxa2xx-uart.2", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x41600000, "pxa2xx-uart.3", NULL),
OF_DEV_AUXDATA("marvell,pxa-mmc", 0x41100000, "pxa2xx-mci.0", NULL),
- OF_DEV_AUXDATA("mrvl,pxa-gpio", 0x40e00000, "pxa-gpio", NULL),
+ OF_DEV_AUXDATA("intel,pxa3xx-gpio", 0x40e00000, "pxa3xx-gpio", NULL),
OF_DEV_AUXDATA("marvell,pxa-ohci", 0x4c000000, "pxa27x-ohci", NULL),
OF_DEV_AUXDATA("mrvl,pxa-i2c", 0x40301680, "pxa2xx-i2c.0", NULL),
OF_DEV_AUXDATA("mrvl,pwri2c", 0x40f500c0, "pxa3xx-i2c.1", NULL),
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 3912ce9..cdefd7d 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -1,3 +1,41 @@
+config ARCH_SHMOBILE_MULTI
+ bool "SH-Mobile Series" if ARCH_MULTI_V7
+ depends on MMU
+ select CPU_V7
+ select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if LOCAL_TIMERS
+ select HAVE_SMP
+ select ARM_GIC
+ select MIGHT_HAVE_CACHE_L2X0
+ select NO_IOPORT
+ select PINCTRL
+ select ARCH_REQUIRE_GPIOLIB
+ select CLKDEV_LOOKUP
+
+if ARCH_SHMOBILE_MULTI
+
+comment "SH-Mobile System Type"
+
+config ARCH_EMEV2
+ bool "Emma Mobile EV2"
+
+comment "SH-Mobile Board Type"
+
+config MACH_KZM9D_REFERENCE
+ bool "KZM9D board - Reference Device Tree Implementation"
+ depends on ARCH_EMEV2
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ ---help---
+ Use reference implementation of KZM9D board support
+ which makes a greater use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
+comment "SH-Mobile System Configuration"
+endif
+
if ARCH_SHMOBILE
comment "SH-Mobile System Type"
@@ -156,6 +194,18 @@
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select USE_OF
+config MACH_KZM9D_REFERENCE
+ bool "KZM9D board - Reference Device Tree Implementation"
+ depends on ARCH_EMEV2
+ select REGULATOR_FIXED_VOLTAGE if REGULATOR
+ select USE_OF
+ ---help---
+ Use reference implementation of KZM9D board support
+ which makes a greater use of device tree at the expense
+ of not supporting a number of devices.
+
+ This is intended to aid developers
+
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
@@ -186,6 +236,15 @@
bool
default y
+config SH_CLK_CPG
+ bool
+
+source "drivers/sh/Kconfig"
+
+endif
+
+if ARCH_SHMOBILE || ARCH_SHMOBILE_MULTI
+
menu "Timer and clock configuration"
config SHMOBILE_TIMER_HZ
@@ -220,9 +279,4 @@
endmenu
-config SH_CLK_CPG
- bool
-
-source "drivers/sh/Kconfig"
-
endif
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 6165a51..b150c45 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -2,18 +2,33 @@
# Makefile for the linux kernel.
#
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/arch/arm/mach-shmobile/include
+
# Common objects
-obj-y := timer.o console.o clock.o
+obj-y := timer.o console.o
# CPU objects
-obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o
-obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o
-obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o clock-r8a73a4.o
-obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o
-obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o clock-r8a7778.o
-obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o
-obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o clock-r8a7790.o
-obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o
+obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o intc-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o intc-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o intc-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o intc-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
+obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
+
+# Clock objects
+ifndef CONFIG_COMMON_CLK
+obj-y += clock.o
+obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
+obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
+obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
+obj-$(CONFIG_ARCH_R8A7740) += clock-r8a7740.o
+obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
+obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
+obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
+obj-$(CONFIG_ARCH_EMEV2) += clock-emev2.o
+endif
# SMP objects
smp-y := platsmp.o headsmp.o
@@ -46,6 +61,7 @@
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += board-armadillo800eva-reference.o
obj-$(CONFIG_MACH_KZM9D) += board-kzm9d.o
+obj-$(CONFIG_MACH_KZM9D_REFERENCE) += board-kzm9d-reference.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 84c6868..7785c52 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -7,6 +7,7 @@
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_KOTA2) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9D) += 0x40008000
+loadaddr-$(CONFIG_MACH_KZM9D_REFERENCE) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ape6evm.c b/arch/arm/mach-shmobile/board-ape6evm.c
index 5eb0caa..1fbc39a 100644
--- a/arch/arm/mach-shmobile/board-ape6evm.c
+++ b/arch/arm/mach-shmobile/board-ape6evm.c
@@ -20,7 +20,6 @@
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/pinctrl/machine.h>
#include <linux/platform_device.h>
@@ -102,7 +101,6 @@
};
DT_MACHINE_START(APE6EVM_DT, "ape6evm")
- .init_irq = irqchip_init,
.init_time = shmobile_timer_init,
.init_machine = ape6evm_add_standard_devices,
.dt_compat = ape6evm_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
index 03b85fe..002d8d3 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva-reference.c
@@ -24,7 +24,6 @@
#include <linux/kernel.h>
#include <linux/gpio.h>
#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
#include <mach/common.h>
#include <mach/r8a7740.h>
#include <asm/mach/arch.h>
@@ -119,12 +118,6 @@
* usbhsf_power_ctrl()
*/
-static const struct pinctrl_map eva_pinctrl_map[] = {
- /* SCIFA1 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.1", "pfc-r8a7740",
- "scifa1_data", "scifa1"),
-};
-
static void __init eva_clock_init(void)
{
struct clk *system = clk_get(NULL, "system_clk");
@@ -165,27 +158,18 @@
*/
static void __init eva_init(void)
{
-
r8a7740_clock_init(MD_CK0 | MD_CK2);
eva_clock_init();
- pinctrl_register_mappings(eva_pinctrl_map, ARRAY_SIZE(eva_pinctrl_map));
- r8a7740_pinmux_init();
-
r8a7740_meram_workaround();
- /*
- * Touchscreen
- * TODO: Move reset GPIO over to .dts when we can reference it
- */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 32K*8way */
l2x0_init(IOMEM(0xf0002000), 0x40440000, 0x82000fff);
#endif
r8a7740_add_standard_devices_dt();
+
r8a7740_pm_init();
}
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
index e115f67..f6952c2 100644
--- a/arch/arm/mach-shmobile/board-armadillo800eva.c
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -679,15 +679,6 @@
};
/* SDHI0 */
-/*
- * FIXME
- *
- * It use polling mode here, since
- * CD (= Card Detect) pin is not connected to SDHI0_CD.
- * We can use IRQ31 as card detect irq,
- * but it needs chattering removal operation
- */
-#define IRQ31 irq_pin(31)
static struct sh_mobile_sdhi_info sdhi0_info = {
.dma_slave_tx = SHDMA_SLAVE_SDHI0_TX,
.dma_slave_rx = SHDMA_SLAVE_SDHI0_RX,
@@ -1162,9 +1153,6 @@
gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
gpio_request_one(202, GPIOF_OUT_INIT_LOW, NULL); /* LCD0_LED_CONT */
- /* Touchscreen */
- gpio_request_one(166, GPIOF_OUT_INIT_HIGH, NULL); /* TP_RST_B */
-
/* GETHER */
gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
diff --git a/arch/arm/mach-shmobile/board-bockw.c b/arch/arm/mach-shmobile/board-bockw.c
index d555464..3354a85 100644
--- a/arch/arm/mach-shmobile/board-bockw.c
+++ b/arch/arm/mach-shmobile/board-bockw.c
@@ -167,7 +167,13 @@
"usb1", "usb1"),
/* SDHI0 */
PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
- "sdhi0", "sdhi0"),
+ "sdhi0_data4", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+ "sdhi0_ctrl", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+ "sdhi0_cd", "sdhi0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7778",
+ "sdhi0_wp", "sdhi0"),
};
#define FPGA 0x18200000
diff --git a/arch/arm/mach-shmobile/board-kzm9d-reference.c b/arch/arm/mach-shmobile/board-kzm9d-reference.c
new file mode 100644
index 0000000..8f8bb2f
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9d-reference.c
@@ -0,0 +1,47 @@
+/*
+ * kzm9d board support - Reference DT implementation
+ *
+ * Copyright (C) 2013 Renesas Solutions Corp.
+ * Copyright (C) 2013 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <mach/emev2.h>
+#include <mach/common.h>
+#include <asm/mach/arch.h>
+
+static void __init kzm9d_add_standard_devices(void)
+{
+ if (!IS_ENABLED(CONFIG_COMMON_CLK))
+ emev2_clock_init();
+
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+}
+
+static const char *kzm9d_boards_compat_dt[] __initdata = {
+ "renesas,kzm9d-reference",
+ NULL,
+};
+
+DT_MACHINE_START(KZM9D_DT, "kzm9d")
+ .smp = smp_ops(emev2_smp_ops),
+ .map_io = emev2_map_io,
+ .init_early = emev2_init_delay,
+ .init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
+ .dt_compat = kzm9d_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c
index 4368000..30c2cc6 100644
--- a/arch/arm/mach-shmobile/board-kzm9d.c
+++ b/arch/arm/mach-shmobile/board-kzm9d.c
@@ -85,9 +85,7 @@
DT_MACHINE_START(KZM9D_DT, "kzm9d")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
- .init_early = emev2_add_early_devices,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = emev2_init_irq,
+ .init_early = emev2_init_delay,
.init_machine = kzm9d_add_standard_devices,
.init_late = shmobile_init_late,
.dt_compat = kzm9d_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-kzm9g-reference.c b/arch/arm/mach-shmobile/board-kzm9g-reference.c
index 44055fe..a66a808 100644
--- a/arch/arm/mach-shmobile/board-kzm9g-reference.c
+++ b/arch/arm/mach-shmobile/board-kzm9g-reference.c
@@ -21,67 +21,19 @@
*/
#include <linux/delay.h>
-#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/input.h>
#include <linux/of_platform.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
#include <mach/sh73a0.h>
#include <mach/common.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
-static unsigned long pin_pullup_conf[] = {
- PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map kzm_pinctrl_map[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("e6826000.i2c", "pfc-sh73a0",
- "i2c3_1", "i2c3"),
- /* MMCIF */
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
- "mmc0_data8_0", "mmc0"),
- PIN_MAP_MUX_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
- "mmc0_ctrl_0", "mmc0"),
- PIN_MAP_CONFIGS_PIN_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
- "PORT279", pin_pullup_conf),
- PIN_MAP_CONFIGS_GROUP_DEFAULT("e6bd0000.mmcif", "pfc-sh73a0",
- "mmc0_data8_0", pin_pullup_conf),
- /* SCIFA4 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
- "scifa4_data", "scifa4"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-sh73a0",
- "scifa4_ctrl", "scifa4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee100000.sdhi", "pfc-sh73a0",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("ee140000.sdhi", "pfc-sh73a0",
- "sdhi2_ctrl", "sdhi2"),
-};
-
static void __init kzm_init(void)
{
sh73a0_add_standard_devices_dt();
- pinctrl_register_mappings(kzm_pinctrl_map, ARRAY_SIZE(kzm_pinctrl_map));
- sh73a0_pinmux_init();
-
- /* enable SD */
- gpio_request_one(15, GPIOF_OUT_INIT_HIGH, NULL); /* power */
-
- gpio_request_one(14, GPIOF_OUT_INIT_HIGH, NULL); /* power */
#ifdef CONFIG_CACHE_L2X0
/* Early BRESP enable, Shared attribute override enable, 64K*8way */
@@ -99,7 +51,6 @@
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
.init_machine = kzm_init,
.init_time = shmobile_timer_init,
.dt_compat = kzm9g_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-lager.c b/arch/arm/mach-shmobile/board-lager.c
index d73e21d..78d92d3 100644
--- a/arch/arm/mach-shmobile/board-lager.c
+++ b/arch/arm/mach-shmobile/board-lager.c
@@ -22,7 +22,6 @@
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/interrupt.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/leds.h>
#include <linux/pinctrl/machine.h>
@@ -59,7 +58,7 @@
#define GPIO_KEY(c, g, d, ...) \
{ .code = c, .gpio = g, .desc = d, .active_low = 1 }
-static __initdata struct gpio_keys_button gpio_buttons[] = {
+static struct gpio_keys_button gpio_buttons[] = {
GPIO_KEY(KEY_4, RCAR_GP_PIN(1, 28), "SW2-pin4"),
GPIO_KEY(KEY_3, RCAR_GP_PIN(1, 26), "SW2-pin3"),
GPIO_KEY(KEY_2, RCAR_GP_PIN(1, 24), "SW2-pin2"),
@@ -103,7 +102,6 @@
};
DT_MACHINE_START(LAGER_DT, "lager")
- .init_irq = irqchip_init,
.init_time = r8a7790_timer_init,
.init_machine = lager_add_standard_devices,
.dt_compat = lager_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/board-marzen-reference.c b/arch/arm/mach-shmobile/board-marzen-reference.c
index 480d882..3d1c439 100644
--- a/arch/arm/mach-shmobile/board-marzen-reference.c
+++ b/arch/arm/mach-shmobile/board-marzen-reference.c
@@ -19,42 +19,14 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/pinctrl/machine.h>
#include <mach/r8a7779.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-static const struct pinctrl_map marzen_pinctrl_map[] = {
- /* SCIF2 (CN18: DEBUG0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
- "scif2_data_c", "scif2"),
- /* SCIF4 (CN19: DEBUG1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
- "scif4_data", "scif4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
- "sdhi0_wp", "sdhi0"),
- /* SMSC */
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
- "intc_irq1_b", "intc"),
- PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
- "lbsc_ex_cs0", "lbsc"),
-};
-
static void __init marzen_init(void)
{
- pinctrl_register_mappings(marzen_pinctrl_map,
- ARRAY_SIZE(marzen_pinctrl_map));
- r8a7779_pinmux_init();
-
r8a7779_add_standard_devices_dt();
}
diff --git a/arch/arm/mach-shmobile/clock-emev2.c b/arch/arm/mach-shmobile/clock-emev2.c
index 4710f18..56dd0cf 100644
--- a/arch/arm/mach-shmobile/clock-emev2.c
+++ b/arch/arm/mach-shmobile/clock-emev2.c
@@ -221,7 +221,7 @@
smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE);
BUG_ON(!smu_base);
- /* setup STI timer to run on 37.768 kHz and deassert reset */
+ /* setup STI timer to run on 32.768 kHz and deassert reset */
emev2_smu_write(0, STI_CLKSEL);
emev2_smu_write(1, STI_RSTCTRL);
diff --git a/arch/arm/mach-shmobile/include/mach/dma.h b/arch/arm/mach-shmobile/include/mach/dma.h
deleted file mode 100644
index 40a8c17..0000000
--- a/arch/arm/mach-shmobile/include/mach/dma.h
+++ /dev/null
@@ -1 +0,0 @@
-/* empty */
diff --git a/arch/arm/mach-shmobile/include/mach/emev2.h b/arch/arm/mach-shmobile/include/mach/emev2.h
index ac37517..b0ab4b7 100644
--- a/arch/arm/mach-shmobile/include/mach/emev2.h
+++ b/arch/arm/mach-shmobile/include/mach/emev2.h
@@ -2,8 +2,7 @@
#define __ASM_EMEV2_H__
extern void emev2_map_io(void);
-extern void emev2_init_irq(void);
-extern void emev2_add_early_devices(void);
+extern void emev2_init_delay(void);
extern void emev2_add_standard_devices(void);
extern void emev2_clock_init(void);
extern void emev2_set_boot_vector(unsigned long value);
diff --git a/arch/arm/mach-shmobile/include/mach/r8a7778.h b/arch/arm/mach-shmobile/include/mach/r8a7778.h
index 851d027..9b561bf 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7778.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7778.h
@@ -33,7 +33,6 @@
extern void r8a7778_init_late(void);
extern void r8a7778_init_delay(void);
-extern void r8a7778_init_irq(void);
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
diff --git a/arch/arm/mach-shmobile/setup-emev2.c b/arch/arm/mach-shmobile/setup-emev2.c
index 1ccddd2..1553af8 100644
--- a/arch/arm/mach-shmobile/setup-emev2.c
+++ b/arch/arm/mach-shmobile/setup-emev2.c
@@ -20,7 +20,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
@@ -39,13 +38,6 @@
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
- /* 128K entity map for 0xe0100000 (SMU) */
- {
- .virtual = 0xe0100000,
- .pfn = __phys_to_pfn(0xe0100000),
- .length = SZ_128K,
- .type = MT_DEVICE
- },
/* 2M mapping for SCU + L2 controller */
{
.virtual = 0xf0000000,
@@ -63,102 +55,40 @@
/* UART */
static struct resource uart0_resources[] = {
- [0] = {
- .start = 0xe1020000,
- .end = 0xe1020037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 40,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart0_device = {
- .name = "serial8250-em",
- .id = 0,
- .num_resources = ARRAY_SIZE(uart0_resources),
- .resource = uart0_resources,
+ DEFINE_RES_MEM(0xe1020000, 0x38),
+ DEFINE_RES_IRQ(40),
};
static struct resource uart1_resources[] = {
- [0] = {
- .start = 0xe1030000,
- .end = 0xe1030037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 41,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart1_device = {
- .name = "serial8250-em",
- .id = 1,
- .num_resources = ARRAY_SIZE(uart1_resources),
- .resource = uart1_resources,
+ DEFINE_RES_MEM(0xe1030000, 0x38),
+ DEFINE_RES_IRQ(41),
};
static struct resource uart2_resources[] = {
- [0] = {
- .start = 0xe1040000,
- .end = 0xe1040037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 42,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device uart2_device = {
- .name = "serial8250-em",
- .id = 2,
- .num_resources = ARRAY_SIZE(uart2_resources),
- .resource = uart2_resources,
+ DEFINE_RES_MEM(0xe1040000, 0x38),
+ DEFINE_RES_IRQ(42),
};
static struct resource uart3_resources[] = {
- [0] = {
- .start = 0xe1050000,
- .end = 0xe1050037,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 43,
- .flags = IORESOURCE_IRQ,
- }
+ DEFINE_RES_MEM(0xe1050000, 0x38),
+ DEFINE_RES_IRQ(43),
};
-static struct platform_device uart3_device = {
- .name = "serial8250-em",
- .id = 3,
- .num_resources = ARRAY_SIZE(uart3_resources),
- .resource = uart3_resources,
-};
+#define emev2_register_uart(idx) \
+ platform_device_register_simple("serial8250-em", idx, \
+ uart##idx##_resources, \
+ ARRAY_SIZE(uart##idx##_resources))
/* STI */
static struct resource sti_resources[] = {
- [0] = {
- .name = "STI",
- .start = 0xe0180000,
- .end = 0xe0180053,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 157,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_MEM(0xe0180000, 0x54),
+ DEFINE_RES_IRQ(157),
};
-static struct platform_device sti_device = {
- .name = "em_sti",
- .id = 0,
- .resource = sti_resources,
- .num_resources = ARRAY_SIZE(sti_resources),
-};
-
+#define emev2_register_sti() \
+ platform_device_register_simple("em_sti", 0, \
+ sti_resources, \
+ ARRAY_SIZE(sti_resources))
/* GIO */
static struct gpio_em_config gio0_config = {
@@ -168,36 +98,10 @@
};
static struct resource gio0_resources[] = {
- [0] = {
- .name = "GIO_000",
- .start = 0xe0050000,
- .end = 0xe005002b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_000",
- .start = 0xe0050040,
- .end = 0xe005005f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 99,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 100,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio0_device = {
- .name = "em_gio",
- .id = 0,
- .resource = gio0_resources,
- .num_resources = ARRAY_SIZE(gio0_resources),
- .dev = {
- .platform_data = &gio0_config,
- },
+ DEFINE_RES_MEM(0xe0050000, 0x2c),
+ DEFINE_RES_MEM(0xe0050040, 0x20),
+ DEFINE_RES_IRQ(99),
+ DEFINE_RES_IRQ(100),
};
static struct gpio_em_config gio1_config = {
@@ -207,36 +111,10 @@
};
static struct resource gio1_resources[] = {
- [0] = {
- .name = "GIO_032",
- .start = 0xe0050080,
- .end = 0xe00500ab,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_032",
- .start = 0xe00500c0,
- .end = 0xe00500df,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 101,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 102,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio1_device = {
- .name = "em_gio",
- .id = 1,
- .resource = gio1_resources,
- .num_resources = ARRAY_SIZE(gio1_resources),
- .dev = {
- .platform_data = &gio1_config,
- },
+ DEFINE_RES_MEM(0xe0050080, 0x2c),
+ DEFINE_RES_MEM(0xe00500c0, 0x20),
+ DEFINE_RES_IRQ(101),
+ DEFINE_RES_IRQ(102),
};
static struct gpio_em_config gio2_config = {
@@ -246,36 +124,10 @@
};
static struct resource gio2_resources[] = {
- [0] = {
- .name = "GIO_064",
- .start = 0xe0050100,
- .end = 0xe005012b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_064",
- .start = 0xe0050140,
- .end = 0xe005015f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 103,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 104,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio2_device = {
- .name = "em_gio",
- .id = 2,
- .resource = gio2_resources,
- .num_resources = ARRAY_SIZE(gio2_resources),
- .dev = {
- .platform_data = &gio2_config,
- },
+ DEFINE_RES_MEM(0xe0050100, 0x2c),
+ DEFINE_RES_MEM(0xe0050140, 0x20),
+ DEFINE_RES_IRQ(103),
+ DEFINE_RES_IRQ(104),
};
static struct gpio_em_config gio3_config = {
@@ -285,36 +137,10 @@
};
static struct resource gio3_resources[] = {
- [0] = {
- .name = "GIO_096",
- .start = 0xe0050180,
- .end = 0xe00501ab,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_096",
- .start = 0xe00501c0,
- .end = 0xe00501df,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 105,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 106,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device gio3_device = {
- .name = "em_gio",
- .id = 3,
- .resource = gio3_resources,
- .num_resources = ARRAY_SIZE(gio3_resources),
- .dev = {
- .platform_data = &gio3_config,
- },
+ DEFINE_RES_MEM(0xe0050180, 0x2c),
+ DEFINE_RES_MEM(0xe00501c0, 0x20),
+ DEFINE_RES_IRQ(105),
+ DEFINE_RES_IRQ(106),
};
static struct gpio_em_config gio4_config = {
@@ -324,126 +150,53 @@
};
static struct resource gio4_resources[] = {
- [0] = {
- .name = "GIO_128",
- .start = 0xe0050200,
- .end = 0xe005022b,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "GIO_128",
- .start = 0xe0050240,
- .end = 0xe005025f,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 107,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = 108,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_MEM(0xe0050200, 0x2c),
+ DEFINE_RES_MEM(0xe0050240, 0x20),
+ DEFINE_RES_IRQ(107),
+ DEFINE_RES_IRQ(108),
};
-static struct platform_device gio4_device = {
- .name = "em_gio",
- .id = 4,
- .resource = gio4_resources,
- .num_resources = ARRAY_SIZE(gio4_resources),
- .dev = {
- .platform_data = &gio4_config,
- },
-};
+#define emev2_register_gio(idx) \
+ platform_device_register_resndata(&platform_bus, "em_gio", \
+ idx, gio##idx##_resources, \
+ ARRAY_SIZE(gio##idx##_resources), \
+ &gio##idx##_config, \
+ sizeof(struct gpio_em_config))
static struct resource pmu_resources[] = {
- [0] = {
- .start = 152,
- .end = 152,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = 153,
- .end = 153,
- .flags = IORESOURCE_IRQ,
- },
+ DEFINE_RES_IRQ(152),
+ DEFINE_RES_IRQ(153),
};
-static struct platform_device pmu_device = {
- .name = "arm-pmu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pmu_resources),
- .resource = pmu_resources,
-};
-
-static struct platform_device *emev2_early_devices[] __initdata = {
- &uart0_device,
- &uart1_device,
- &uart2_device,
- &uart3_device,
-};
-
-static struct platform_device *emev2_late_devices[] __initdata = {
- &sti_device,
- &gio0_device,
- &gio1_device,
- &gio2_device,
- &gio3_device,
- &gio4_device,
- &pmu_device,
-};
+#define emev2_register_pmu() \
+ platform_device_register_simple("arm-pmu", -1, \
+ pmu_resources, \
+ ARRAY_SIZE(pmu_resources))
void __init emev2_add_standard_devices(void)
{
- emev2_clock_init();
+ if (!IS_ENABLED(CONFIG_COMMON_CLK))
+ emev2_clock_init();
- platform_add_devices(emev2_early_devices,
- ARRAY_SIZE(emev2_early_devices));
-
- platform_add_devices(emev2_late_devices,
- ARRAY_SIZE(emev2_late_devices));
+ emev2_register_uart(0);
+ emev2_register_uart(1);
+ emev2_register_uart(2);
+ emev2_register_uart(3);
+ emev2_register_sti();
+ emev2_register_gio(0);
+ emev2_register_gio(1);
+ emev2_register_gio(2);
+ emev2_register_gio(3);
+ emev2_register_gio(4);
+ emev2_register_pmu();
}
-static void __init emev2_init_delay(void)
+void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
-void __init emev2_add_early_devices(void)
-{
- emev2_init_delay();
-
- early_platform_add_devices(emev2_early_devices,
- ARRAY_SIZE(emev2_early_devices));
-
- /* setup early console here as well */
- shmobile_setup_console();
-}
-
-void __init emev2_init_irq(void)
-{
- void __iomem *gic_dist_base;
- void __iomem *gic_cpu_base;
-
- /* Static mappings, never released */
- gic_dist_base = ioremap(0xe0028000, PAGE_SIZE);
- gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE);
- BUG_ON(!gic_dist_base || !gic_cpu_base);
-
- /* Use GIC to handle interrupts */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-}
-
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata emev2_auxdata_lookup[] __initconst = {
- { }
-};
-
-static void __init emev2_add_standard_devices_dt(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- emev2_auxdata_lookup, NULL);
-}
static const char *emev2_boards_compat_dt[] __initdata = {
"renesas,emev2",
@@ -452,10 +205,8 @@
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
+ .map_io = emev2_map_io,
.init_early = emev2_init_delay,
- .nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
- .init_machine = emev2_add_standard_devices_dt,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-r8a73a4.c b/arch/arm/mach-shmobile/setup-r8a73a4.c
index 7f45c2e..a8c4e41 100644
--- a/arch/arm/mach-shmobile/setup-r8a73a4.c
+++ b/arch/arm/mach-shmobile/setup-r8a73a4.c
@@ -18,7 +18,6 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/platform_data/irq-renesas-irqc.h>
@@ -194,7 +193,6 @@
};
DT_MACHINE_START(R8A73A4_DT, "Generic R8A73A4 (Flattened Device Tree)")
- .init_irq = irqchip_init,
.init_machine = r8a73a4_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a73a4_boards_compat_dt,
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 00c5a70..ac29c2e 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -986,16 +986,22 @@
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata r8a7740_auxdata_lookup[] __initconst = {
- { }
-};
+void __init r8a7740_add_early_devices_dt(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+
+ early_platform_add_devices(r8a7740_early_devices,
+ ARRAY_SIZE(r8a7740_early_devices));
+
+ /* setup early console here as well */
+ shmobile_setup_console();
+}
void __init r8a7740_add_standard_devices_dt(void)
{
platform_add_devices(r8a7740_devices_dt,
ARRAY_SIZE(r8a7740_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7740_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
void __init r8a7740_init_delay(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 80c2039..a3a2e37 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -53,7 +53,7 @@
.irqs = SCIx_IRQ_MUXED(irq), \
}
-static struct plat_sci_port scif_platform_data[] = {
+static struct plat_sci_port scif_platform_data[] __initdata = {
SCIF_INFO(0xffe40000, gic_iid(0x66)),
SCIF_INFO(0xffe41000, gic_iid(0x67)),
SCIF_INFO(0xffe42000, gic_iid(0x68)),
@@ -63,24 +63,24 @@
};
/* TMU */
-static struct resource sh_tmu0_resources[] = {
+static struct resource sh_tmu0_resources[] __initdata = {
DEFINE_RES_MEM(0xffd80008, 12),
DEFINE_RES_IRQ(gic_iid(0x40)),
};
-static struct sh_timer_config sh_tmu0_platform_data = {
+static struct sh_timer_config sh_tmu0_platform_data __initdata = {
.name = "TMU00",
.channel_offset = 0x4,
.timer_bit = 0,
.clockevent_rating = 200,
};
-static struct resource sh_tmu1_resources[] = {
+static struct resource sh_tmu1_resources[] __initdata = {
DEFINE_RES_MEM(0xffd80014, 12),
DEFINE_RES_IRQ(gic_iid(0x41)),
};
-static struct sh_timer_config sh_tmu1_platform_data = {
+static struct sh_timer_config sh_tmu1_platform_data __initdata = {
.name = "TMU01",
.channel_offset = 0x10,
.timer_bit = 1,
@@ -189,7 +189,7 @@
USB_PLATFORM_INFO(ohci);
/* Ether */
-static struct resource ether_resources[] = {
+static struct resource ether_resources[] __initdata = {
DEFINE_RES_MEM(0xfde00000, 0x400),
DEFINE_RES_IRQ(gic_iid(0x89)),
};
@@ -203,17 +203,17 @@
}
/* PFC/GPIO */
-static struct resource pfc_resources[] = {
+static struct resource pfc_resources[] __initdata = {
DEFINE_RES_MEM(0xfffc0000, 0x118),
};
#define R8A7778_GPIO(idx) \
-static struct resource r8a7778_gpio##idx##_resources[] = { \
+static struct resource r8a7778_gpio##idx##_resources[] __initdata = { \
DEFINE_RES_MEM(0xffc40000 + 0x1000 * (idx), 0x30), \
DEFINE_RES_IRQ(gic_iid(0x87)), \
}; \
\
-static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data = { \
+static struct gpio_rcar_config r8a7778_gpio##idx##_platform_data __initdata = { \
.gpio_base = 32 * (idx), \
.irq_base = GPIO_IRQ_BASE(idx), \
.number_of_pins = 32, \
@@ -249,7 +249,7 @@
};
/* SDHI */
-static struct resource sdhi_resources[] = {
+static struct resource sdhi_resources[] __initdata = {
/* SDHI0 */
DEFINE_RES_MEM(0xFFE4C000, 0x100),
DEFINE_RES_IRQ(gic_iid(0x77)),
@@ -365,12 +365,12 @@
platform_device_register_full(&ohci_info);
}
-static struct renesas_intc_irqpin_config irqpin_platform_data = {
+static struct renesas_intc_irqpin_config irqpin_platform_data __initdata = {
.irq_base = irq_pin(0), /* IRQ0 -> IRQ3 */
.sense_bitfield_width = 2,
};
-static struct resource irqpin_resources[] = {
+static struct resource irqpin_resources[] __initdata = {
DEFINE_RES_MEM(0xfe78001c, 4), /* ICR1 */
DEFINE_RES_MEM(0xfe780010, 4), /* INTPRI */
DEFINE_RES_MEM(0xfe780024, 4), /* INTREQ */
@@ -408,17 +408,25 @@
&irqpin_platform_data, sizeof(irqpin_platform_data));
}
+void __init r8a7778_init_delay(void)
+{
+ shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
+}
+
+#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
#define INT2NTSR0 0x00018 /* 0xfe700018 */
#define INT2NTSR1 0x0002c /* 0xfe70002c */
-static void __init r8a7778_init_irq_common(void)
+void __init r8a7778_init_irq_dt(void)
{
void __iomem *base = ioremap_nocache(0xfe700000, 0x00100000);
BUG_ON(!base);
+ irqchip_init();
+
/* route all interrupts to ARM */
__raw_writel(0x73ffffff, base + INT2NTSR0);
__raw_writel(0xffffffff, base + INT2NTSR1);
@@ -430,43 +438,6 @@
iounmap(base);
}
-void __init r8a7778_init_irq(void)
-{
- void __iomem *gic_dist_base;
- void __iomem *gic_cpu_base;
-
- gic_dist_base = ioremap_nocache(0xfe438000, PAGE_SIZE);
- gic_cpu_base = ioremap_nocache(0xfe430000, PAGE_SIZE);
- BUG_ON(!gic_dist_base || !gic_cpu_base);
-
- /* use GIC to handle interrupts */
- gic_init(0, 29, gic_dist_base, gic_cpu_base);
-
- r8a7778_init_irq_common();
-}
-
-void __init r8a7778_init_delay(void)
-{
- shmobile_setup_delay(800, 1, 3); /* Cortex-A9 @ 800MHz */
-}
-
-#ifdef CONFIG_USE_OF
-void __init r8a7778_init_irq_dt(void)
-{
- irqchip_init();
- r8a7778_init_irq_common();
-}
-
-static const struct of_dev_auxdata r8a7778_auxdata_lookup[] __initconst = {
- {},
-};
-
-void __init r8a7778_add_standard_devices_dt(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7778_auxdata_lookup, NULL);
-}
-
static const char *r8a7778_compat_dt[] __initdata = {
"renesas,r8a7778",
NULL,
@@ -475,7 +446,6 @@
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
.init_early = r8a7778_init_delay,
.init_irq = r8a7778_init_irq_dt,
- .init_machine = r8a7778_add_standard_devices_dt,
.init_time = shmobile_timer_init,
.dt_compat = r8a7778_compat_dt,
.init_late = r8a7778_init_late,
diff --git a/arch/arm/mach-shmobile/setup-r8a7779.c b/arch/arm/mach-shmobile/setup-r8a7779.c
index 3986877..66d3826 100644
--- a/arch/arm/mach-shmobile/setup-r8a7779.c
+++ b/arch/arm/mach-shmobile/setup-r8a7779.c
@@ -665,10 +665,6 @@
shmobile_setup_delay(1000, 2, 4); /* Cortex-A9 @ 1000MHz */
}
-static const struct of_dev_auxdata r8a7779_auxdata_lookup[] __initconst = {
- {},
-};
-
void __init r8a7779_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -676,8 +672,7 @@
platform_add_devices(r8a7779_devices_dt,
ARRAY_SIZE(r8a7779_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- r8a7779_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *r8a7779_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-r8a7790.c b/arch/arm/mach-shmobile/setup-r8a7790.c
index 28f9475..b7e78b9 100644
--- a/arch/arm/mach-shmobile/setup-r8a7790.c
+++ b/arch/arm/mach-shmobile/setup-r8a7790.c
@@ -19,7 +19,6 @@
*/
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
#include <linux/serial_sci.h>
@@ -177,10 +176,6 @@
}
#ifdef CONFIG_USE_OF
-void __init r8a7790_add_standard_devices_dt(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
static const char *r8a7790_boards_compat_dt[] __initdata = {
"renesas,r8a7790",
@@ -188,8 +183,6 @@
};
DT_MACHINE_START(R8A7790_DT, "Generic R8A7790 (Flattened Device Tree)")
- .init_irq = irqchip_init,
- .init_machine = r8a7790_add_standard_devices_dt,
.init_time = r8a7790_timer_init,
.dt_compat = r8a7790_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c
index 5502d62..13e6fdb 100644
--- a/arch/arm/mach-shmobile/setup-sh7372.c
+++ b/arch/arm/mach-shmobile/setup-sh7372.c
@@ -1147,10 +1147,6 @@
shmobile_setup_console();
}
-static const struct of_dev_auxdata sh7372_auxdata_lookup[] __initconst = {
- { }
-};
-
void __init sh7372_add_standard_devices_dt(void)
{
/* clocks are setup late during boot in the case of DT */
@@ -1159,8 +1155,7 @@
platform_add_devices(sh7372_early_devices,
ARRAY_SIZE(sh7372_early_devices));
- of_platform_populate(NULL, of_default_bus_match_table,
- sh7372_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *sh7372_boards_compat_dt[] __initdata = {
diff --git a/arch/arm/mach-shmobile/setup-sh73a0.c b/arch/arm/mach-shmobile/setup-sh73a0.c
index 96e7ca1..516c239 100644
--- a/arch/arm/mach-shmobile/setup-sh73a0.c
+++ b/arch/arm/mach-shmobile/setup-sh73a0.c
@@ -22,7 +22,6 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
-#include <linux/irqchip.h>
#include <linux/platform_device.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
@@ -61,29 +60,16 @@
iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
}
-static struct resource sh73a0_pfc_resources[] = {
- [0] = {
- .start = 0xe6050000,
- .end = 0xe6057fff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0xe605801c,
- .end = 0xe6058027,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device sh73a0_pfc_device = {
- .name = "pfc-sh73a0",
- .id = -1,
- .resource = sh73a0_pfc_resources,
- .num_resources = ARRAY_SIZE(sh73a0_pfc_resources),
+/* PFC */
+static struct resource pfc_resources[] __initdata = {
+ DEFINE_RES_MEM(0xe6050000, 0x8000),
+ DEFINE_RES_MEM(0xe605801c, 0x000c),
};
void __init sh73a0_pinmux_init(void)
{
- platform_device_register(&sh73a0_pfc_device);
+ platform_device_register_simple("pfc-sh73a0", -1, pfc_resources,
+ ARRAY_SIZE(pfc_resources));
}
static struct plat_sci_port scif0_platform_data = {
@@ -958,10 +944,6 @@
#ifdef CONFIG_USE_OF
-static const struct of_dev_auxdata sh73a0_auxdata_lookup[] __initconst = {
- {},
-};
-
void __init sh73a0_add_standard_devices_dt(void)
{
struct platform_device_info devinfo = { .name = "cpufreq-cpu0", .id = -1, };
@@ -971,8 +953,7 @@
platform_add_devices(sh73a0_devices_dt,
ARRAY_SIZE(sh73a0_devices_dt));
- of_platform_populate(NULL, of_default_bus_match_table,
- sh73a0_auxdata_lookup, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
/* Instantiate cpufreq-cpu0 */
platform_device_register_full(&devinfo);
@@ -988,7 +969,6 @@
.map_io = sh73a0_map_io,
.init_early = sh73a0_init_delay,
.nr_irqs = NR_IRQS_LEGACY,
- .init_irq = irqchip_init,
.init_machine = sh73a0_add_standard_devices_dt,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c
index 22a05a8..1fcd607 100644
--- a/arch/arm/mach-shmobile/smp-emev2.c
+++ b/arch/arm/mach-shmobile/smp-emev2.c
@@ -38,9 +38,12 @@
static void __init emev2_smp_prepare_cpus(unsigned int max_cpus)
{
+ /* setup EMEV2 specific SCU base, enable */
+ shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
scu_enable(shmobile_scu_base);
/* Tell ROM loader about our vector (in headsmp-scu.S, headsmp.S) */
+ emev2_clock_init(); /* need ioremapped SMU */
emev2_set_boot_vector(__pa(shmobile_boot_vector));
shmobile_boot_fn = virt_to_phys(shmobile_boot_scu);
shmobile_boot_arg = (unsigned long)shmobile_scu_base;
@@ -49,21 +52,7 @@
scu_power_mode(shmobile_scu_base, SCU_PM_NORMAL);
}
-static void __init emev2_smp_init_cpus(void)
-{
- unsigned int ncores;
-
- /* setup EMEV2 specific SCU base */
- shmobile_scu_base = ioremap(EMEV2_SCU_BASE, PAGE_SIZE);
- emev2_clock_init(); /* need ioremapped SMU */
-
- ncores = shmobile_scu_base ? scu_get_core_count(shmobile_scu_base) : 1;
-
- shmobile_smp_init_cpus(ncores);
-}
-
struct smp_operations emev2_smp_ops __initdata = {
- .smp_init_cpus = emev2_smp_init_cpus,
.smp_prepare_cpus = emev2_smp_prepare_cpus,
.smp_boot_secondary = emev2_boot_secondary,
};
diff --git a/arch/arm/mach-sti/headsmp.S b/arch/arm/mach-sti/headsmp.S
index 78ebc75..4c09bae 100644
--- a/arch/arm/mach-sti/headsmp.S
+++ b/arch/arm/mach-sti/headsmp.S
@@ -16,8 +16,6 @@
#include <linux/linkage.h>
#include <linux/init.h>
- __INIT
-
/*
* ST specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 12eee81..2061b6a 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -223,10 +223,10 @@
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
- OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
- OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", NULL),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", NULL),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", NULL),
+ OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", NULL),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
diff --git a/arch/avr32/boards/atngw100/mrmt.c b/arch/avr32/boards/atngw100/mrmt.c
index f914319..7de083d 100644
--- a/arch/avr32/boards/atngw100/mrmt.c
+++ b/arch/avr32/boards/atngw100/mrmt.c
@@ -150,7 +150,6 @@
static struct platform_device rmt_ts_device = {
.name = "ucb1400_ts",
.id = -1,
- }
};
#endif
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index 1dc0860..fa44f3e 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -17,6 +17,8 @@
#define current_cpu_type() current_cpu_data.cputype
#endif
+#define boot_cpu_type() cpu_data[0].cputype
+
/*
* SMP assumption: Options of CPU 0 are a superset of all processors.
* This is true for all known MIPS systems.
diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c
index 159abc8..126da74 100644
--- a/arch/mips/kernel/smp-bmips.c
+++ b/arch/mips/kernel/smp-bmips.c
@@ -66,6 +66,8 @@
int i, cpu = 1, boot_cpu = 0;
#if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
+ int cpu_hw_intr;
+
/* arbitration priority */
clear_c0_brcm_cmt_ctrl(0x30);
@@ -80,8 +82,12 @@
* MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
* MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
*/
- change_c0_brcm_cmt_intr(0xf8018000,
- (0x02 << 27) | (0x03 << 15));
+ if (boot_cpu == 0)
+ cpu_hw_intr = 0x02;
+ else
+ cpu_hw_intr = 0x1d;
+
+ change_c0_brcm_cmt_intr(0xf8018000, (cpu_hw_intr << 27) | (0x03 << 15));
/* single core, 2 threads (2 pipelines) */
max_cpus = 2;
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index e4b1140..3a2b6e9 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -166,7 +166,7 @@
reg.control[i] |= M_PERFCTL_USER;
if (ctr[i].exl)
reg.control[i] |= M_PERFCTL_EXL;
- if (current_cpu_type() == CPU_XLR)
+ if (boot_cpu_type() == CPU_XLR)
reg.control[i] |= M_PERFCTL_COUNT_ALL_THREADS;
reg.counter[i] = 0x80000000 - ctr[i].count;
}
diff --git a/arch/mips/pnx833x/common/platform.c b/arch/mips/pnx833x/common/platform.c
index d22dc0d..2b7e837 100644
--- a/arch/mips/pnx833x/common/platform.c
+++ b/arch/mips/pnx833x/common/platform.c
@@ -206,11 +206,13 @@
.end = PNX8335_IP3902_PORTS_END,
.flags = IORESOURCE_MEM,
},
+#ifdef CONFIG_SOC_PNX8335
[1] = {
.start = PNX8335_PIC_ETHERNET_INT,
.end = PNX8335_PIC_ETHERNET_INT,
.flags = IORESOURCE_IRQ,
},
+#endif
};
static struct platform_device pnx833x_ethernet_device = {
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 3bf72cd..dbd9d3c 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -566,7 +566,7 @@
config PPC_DENORMALISATION
bool "PowerPC denormalisation exception handling"
depends on PPC_BOOK3S_64
- default "n"
+ default "y" if PPC_POWERNV
---help---
Add support for handling denormalisation of single precision
values. Useful for bare metal only. If unsure say Y here.
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 47a35b0..e378ccc 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -247,6 +247,10 @@
unsigned long tm_orig_msr; /* Thread's MSR on ctx switch */
struct pt_regs ckpt_regs; /* Checkpointed registers */
+ unsigned long tm_tar;
+ unsigned long tm_ppr;
+ unsigned long tm_dscr;
+
/*
* Transactional FP and VSX 0-31 register set.
* NOTE: the sense of these is the opposite of the integer ckpt_regs!
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index a6840e4..99222e2 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -254,19 +254,28 @@
#define SPRN_HRMOR 0x139 /* Real mode offset register */
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
+/* HFSCR and FSCR bit numbers are the same */
+#define FSCR_TAR_LG 8 /* Enable Target Address Register */
+#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
+#define FSCR_TM_LG 5 /* Enable Transactional Memory */
+#define FSCR_PM_LG 4 /* Enable prob/priv access to PMU SPRs */
+#define FSCR_BHRB_LG 3 /* Enable Branch History Rolling Buffer*/
+#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */
+#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */
+#define FSCR_FP_LG 0 /* Enable Floating Point */
#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
-#define FSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define FSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define FSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
+#define FSCR_TAR __MASK(FSCR_TAR_LG)
+#define FSCR_EBB __MASK(FSCR_EBB_LG)
+#define FSCR_DSCR __MASK(FSCR_DSCR_LG)
#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */
-#define HFSCR_TAR (1 << (63-55)) /* Enable Target Address Register */
-#define HFSCR_EBB (1 << (63-56)) /* Enable Event Based Branching */
-#define HFSCR_TM (1 << (63-58)) /* Enable Transactional Memory */
-#define HFSCR_PM (1 << (63-60)) /* Enable prob/priv access to PMU SPRs */
-#define HFSCR_BHRB (1 << (63-59)) /* Enable Branch History Rolling Buffer*/
-#define HFSCR_DSCR (1 << (63-61)) /* Enable Data Stream Control Register */
-#define HFSCR_VECVSX (1 << (63-62)) /* Enable VMX/VSX */
-#define HFSCR_FP (1 << (63-63)) /* Enable Floating Point */
+#define HFSCR_TAR __MASK(FSCR_TAR_LG)
+#define HFSCR_EBB __MASK(FSCR_EBB_LG)
+#define HFSCR_TM __MASK(FSCR_TM_LG)
+#define HFSCR_PM __MASK(FSCR_PM_LG)
+#define HFSCR_BHRB __MASK(FSCR_BHRB_LG)
+#define HFSCR_DSCR __MASK(FSCR_DSCR_LG)
+#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG)
+#define HFSCR_FP __MASK(FSCR_FP_LG)
#define SPRN_TAR 0x32f /* Target Address Register */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define LPCR_VPM0 (1ul << (63-0))
diff --git a/arch/powerpc/include/asm/switch_to.h b/arch/powerpc/include/asm/switch_to.h
index 49a13e0..294c2ce 100644
--- a/arch/powerpc/include/asm/switch_to.h
+++ b/arch/powerpc/include/asm/switch_to.h
@@ -15,6 +15,15 @@
struct thread_struct;
extern struct task_struct *_switch(struct thread_struct *prev,
struct thread_struct *next);
+#ifdef CONFIG_PPC_BOOK3S_64
+static inline void save_tar(struct thread_struct *prev)
+{
+ if (cpu_has_feature(CPU_FTR_ARCH_207S))
+ prev->tar = mfspr(SPRN_TAR);
+}
+#else
+static inline void save_tar(struct thread_struct *prev) {}
+#endif
extern void giveup_fpu(struct task_struct *);
extern void load_up_fpu(void);
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index c7e8afc..8207459 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -138,6 +138,9 @@
DEFINE(THREAD_TM_TFHAR, offsetof(struct thread_struct, tm_tfhar));
DEFINE(THREAD_TM_TEXASR, offsetof(struct thread_struct, tm_texasr));
DEFINE(THREAD_TM_TFIAR, offsetof(struct thread_struct, tm_tfiar));
+ DEFINE(THREAD_TM_TAR, offsetof(struct thread_struct, tm_tar));
+ DEFINE(THREAD_TM_PPR, offsetof(struct thread_struct, tm_ppr));
+ DEFINE(THREAD_TM_DSCR, offsetof(struct thread_struct, tm_dscr));
DEFINE(PT_CKPT_REGS, offsetof(struct thread_struct, ckpt_regs));
DEFINE(THREAD_TRANSACT_VR0, offsetof(struct thread_struct,
transact_vr[0]));
diff --git a/arch/powerpc/kernel/eeh.c b/arch/powerpc/kernel/eeh.c
index ea9414c8..55593ee 100644
--- a/arch/powerpc/kernel/eeh.c
+++ b/arch/powerpc/kernel/eeh.c
@@ -1061,7 +1061,7 @@
static int __init eeh_init_proc(void)
{
- if (machine_is(pseries))
+ if (machine_is(pseries) || machine_is(powernv))
proc_create("powerpc/eeh", 0, NULL, &proc_eeh_operations);
return 0;
}
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index ab15b8d..2bd0b88 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -449,15 +449,6 @@
#ifdef CONFIG_PPC_BOOK3S_64
BEGIN_FTR_SECTION
- /*
- * Back up the TAR across context switches. Note that the TAR is not
- * available for use in the kernel. (To provide this, the TAR should
- * be backed up/restored on exception entry/exit instead, and be in
- * pt_regs. FIXME, this should be in pt_regs anyway (for debug).)
- */
- mfspr r0,SPRN_TAR
- std r0,THREAD_TAR(r3)
-
/* Event based branch registers */
mfspr r0, SPRN_BESCR
std r0, THREAD_BESCR(r3)
@@ -584,9 +575,34 @@
ld r7,DSCR_DEFAULT@toc(2)
ld r0,THREAD_DSCR(r4)
cmpwi r6,0
+ li r8, FSCR_DSCR
bne 1f
ld r0,0(r7)
-1: cmpd r0,r25
+ b 3f
+1:
+ BEGIN_FTR_SECTION_NESTED(70)
+ mfspr r6, SPRN_FSCR
+ or r6, r6, r8
+ mtspr SPRN_FSCR, r6
+ BEGIN_FTR_SECTION_NESTED(69)
+ mfspr r6, SPRN_HFSCR
+ or r6, r6, r8
+ mtspr SPRN_HFSCR, r6
+ END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+ b 4f
+ END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+3:
+ BEGIN_FTR_SECTION_NESTED(70)
+ mfspr r6, SPRN_FSCR
+ andc r6, r6, r8
+ mtspr SPRN_FSCR, r6
+ BEGIN_FTR_SECTION_NESTED(69)
+ mfspr r6, SPRN_HFSCR
+ andc r6, r6, r8
+ mtspr SPRN_HFSCR, r6
+ END_FTR_SECTION_NESTED(CPU_FTR_HVMODE, CPU_FTR_HVMODE, 69)
+ END_FTR_SECTION_NESTED(CPU_FTR_ARCH_207S, CPU_FTR_ARCH_207S, 70)
+4: cmpd r0,r25
beq 2f
mtspr SPRN_DSCR,r0
2:
diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S
index 4e00d22..902ca3c 100644
--- a/arch/powerpc/kernel/exceptions-64s.S
+++ b/arch/powerpc/kernel/exceptions-64s.S
@@ -848,7 +848,7 @@
. = 0x4f80
SET_SCRATCH0(r13)
EXCEPTION_PROLOG_0(PACA_EXGEN)
- b facility_unavailable_relon_hv
+ b hv_facility_unavailable_relon_hv
STD_RELON_EXCEPTION_PSERIES(0x5300, 0x1300, instruction_breakpoint)
#ifdef CONFIG_PPC_DENORMALISATION
@@ -1175,6 +1175,7 @@
b .ret_from_except
STD_EXCEPTION_COMMON(0xf60, facility_unavailable, .facility_unavailable_exception)
+ STD_EXCEPTION_COMMON(0xf80, hv_facility_unavailable, .facility_unavailable_exception)
.align 7
.globl __end_handlers
@@ -1188,7 +1189,7 @@
STD_RELON_EXCEPTION_PSERIES_OOL(0xf20, altivec_unavailable)
STD_RELON_EXCEPTION_PSERIES_OOL(0xf40, vsx_unavailable)
STD_RELON_EXCEPTION_PSERIES_OOL(0xf60, facility_unavailable)
- STD_RELON_EXCEPTION_HV_OOL(0xf80, facility_unavailable)
+ STD_RELON_EXCEPTION_HV_OOL(0xf80, hv_facility_unavailable)
#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
/*
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index c517dbe..8083be2 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -600,6 +600,16 @@
struct ppc64_tlb_batch *batch;
#endif
+ /* Back up the TAR across context switches.
+ * Note that the TAR is not available for use in the kernel. (To
+ * provide this, the TAR should be backed up/restored on exception
+ * entry/exit instead, and be in pt_regs. FIXME, this should be in
+ * pt_regs anyway (for debug).)
+ * Save the TAR here before we do treclaim/trecheckpoint as these
+ * will change the TAR.
+ */
+ save_tar(&prev->thread);
+
__switch_to_tm(prev);
#ifdef CONFIG_SMP
diff --git a/arch/powerpc/kernel/tm.S b/arch/powerpc/kernel/tm.S
index 51be8fb..0554d1f 100644
--- a/arch/powerpc/kernel/tm.S
+++ b/arch/powerpc/kernel/tm.S
@@ -233,6 +233,16 @@
std r5, _CCR(r7)
std r6, _XER(r7)
+
+ /* ******************** TAR, PPR, DSCR ********** */
+ mfspr r3, SPRN_TAR
+ mfspr r4, SPRN_PPR
+ mfspr r5, SPRN_DSCR
+
+ std r3, THREAD_TM_TAR(r12)
+ std r4, THREAD_TM_PPR(r12)
+ std r5, THREAD_TM_DSCR(r12)
+
/* MSR and flags: We don't change CRs, and we don't need to alter
* MSR.
*/
@@ -347,6 +357,16 @@
mtmsr r6 /* FP/Vec off again! */
restore_gprs:
+
+ /* ******************** TAR, PPR, DSCR ********** */
+ ld r4, THREAD_TM_TAR(r3)
+ ld r5, THREAD_TM_PPR(r3)
+ ld r6, THREAD_TM_DSCR(r3)
+
+ mtspr SPRN_TAR, r4
+ mtspr SPRN_PPR, r5
+ mtspr SPRN_DSCR, r6
+
/* ******************** CR,LR,CCR,MSR ********** */
ld r3, _CTR(r7)
ld r4, _LINK(r7)
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index bf33c22..e435bc0 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -44,9 +44,7 @@
#include <asm/machdep.h>
#include <asm/rtas.h>
#include <asm/pmc.h>
-#ifdef CONFIG_PPC32
#include <asm/reg.h>
-#endif
#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
#endif
@@ -1296,43 +1294,54 @@
die("Unrecoverable VSX Unavailable Exception", regs, SIGABRT);
}
+#ifdef CONFIG_PPC64
void facility_unavailable_exception(struct pt_regs *regs)
{
static char *facility_strings[] = {
- "FPU",
- "VMX/VSX",
- "DSCR",
- "PMU SPRs",
- "BHRB",
- "TM",
- "AT",
- "EBB",
- "TAR",
+ [FSCR_FP_LG] = "FPU",
+ [FSCR_VECVSX_LG] = "VMX/VSX",
+ [FSCR_DSCR_LG] = "DSCR",
+ [FSCR_PM_LG] = "PMU SPRs",
+ [FSCR_BHRB_LG] = "BHRB",
+ [FSCR_TM_LG] = "TM",
+ [FSCR_EBB_LG] = "EBB",
+ [FSCR_TAR_LG] = "TAR",
};
- char *facility, *prefix;
+ char *facility = "unknown";
u64 value;
+ u8 status;
+ bool hv;
- if (regs->trap == 0xf60) {
- value = mfspr(SPRN_FSCR);
- prefix = "";
- } else {
+ hv = (regs->trap == 0xf80);
+ if (hv)
value = mfspr(SPRN_HFSCR);
- prefix = "Hypervisor ";
+ else
+ value = mfspr(SPRN_FSCR);
+
+ status = value >> 56;
+ if (status == FSCR_DSCR_LG) {
+ /* User is acessing the DSCR. Set the inherit bit and allow
+ * the user to set it directly in future by setting via the
+ * H/FSCR DSCR bit.
+ */
+ current->thread.dscr_inherit = 1;
+ if (hv)
+ mtspr(SPRN_HFSCR, value | HFSCR_DSCR);
+ else
+ mtspr(SPRN_FSCR, value | FSCR_DSCR);
+ return;
}
- value = value >> 56;
+ if ((status < ARRAY_SIZE(facility_strings)) &&
+ facility_strings[status])
+ facility = facility_strings[status];
/* We restore the interrupt state now */
if (!arch_irq_disabled_regs(regs))
local_irq_enable();
- if (value < ARRAY_SIZE(facility_strings))
- facility = facility_strings[value];
- else
- facility = "unknown";
-
pr_err("%sFacility '%s' unavailable, exception at 0x%lx, MSR=%lx\n",
- prefix, facility, regs->nip, regs->msr);
+ hv ? "Hypervisor " : "", facility, regs->nip, regs->msr);
if (user_mode(regs)) {
_exception(SIGILL, regs, ILL_ILLOPC, regs->nip);
@@ -1341,6 +1350,7 @@
die("Unexpected facility unavailable exception", regs, SIGABRT);
}
+#endif
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 2efa9dd..7629cd3 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -1809,7 +1809,7 @@
rma_size <<= PAGE_SHIFT;
rmls = lpcr_rmls(rma_size);
err = -EINVAL;
- if (rmls < 0) {
+ if ((long)rmls < 0) {
pr_err("KVM: Can't use RMA of 0x%lx bytes\n", rma_size);
goto out_srcu;
}
@@ -1874,7 +1874,7 @@
/* Allocate the guest's logical partition ID */
lpid = kvmppc_alloc_lpid();
- if (lpid < 0)
+ if ((long)lpid < 0)
return -ENOMEM;
kvm->arch.lpid = lpid;
diff --git a/arch/powerpc/kvm/book3s_pr.c b/arch/powerpc/kvm/book3s_pr.c
index 19498a5..c6e13d9 100644
--- a/arch/powerpc/kvm/book3s_pr.c
+++ b/arch/powerpc/kvm/book3s_pr.c
@@ -1047,11 +1047,12 @@
if (err)
goto free_shadow_vcpu;
+ err = -ENOMEM;
p = __get_free_page(GFP_KERNEL|__GFP_ZERO);
- /* the real shared page fills the last 4k of our page */
- vcpu->arch.shared = (void*)(p + PAGE_SIZE - 4096);
if (!p)
goto uninit_vcpu;
+ /* the real shared page fills the last 4k of our page */
+ vcpu->arch.shared = (void *)(p + PAGE_SIZE - 4096);
#ifdef CONFIG_PPC_BOOK3S_64
/* default to book3s_64 (970fx) */
diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c
index 9f8671a..6a5f2b1 100644
--- a/arch/powerpc/platforms/pseries/nvram.c
+++ b/arch/powerpc/platforms/pseries/nvram.c
@@ -569,35 +569,6 @@
return ret;
}
-static int unzip_oops(char *oops_buf, char *big_buf)
-{
- struct oops_log_info *oops_hdr = (struct oops_log_info *)oops_buf;
- u64 timestamp = oops_hdr->timestamp;
- char *big_oops_data = NULL;
- char *oops_data_buf = NULL;
- size_t big_oops_data_sz;
- int unzipped_len;
-
- big_oops_data = big_buf + sizeof(struct oops_log_info);
- big_oops_data_sz = big_oops_buf_sz - sizeof(struct oops_log_info);
- oops_data_buf = oops_buf + sizeof(struct oops_log_info);
-
- unzipped_len = nvram_decompress(oops_data_buf, big_oops_data,
- oops_hdr->report_length,
- big_oops_data_sz);
-
- if (unzipped_len < 0) {
- pr_err("nvram: decompression failed; returned %d\n",
- unzipped_len);
- return -1;
- }
- oops_hdr = (struct oops_log_info *)big_buf;
- oops_hdr->version = OOPS_HDR_VERSION;
- oops_hdr->report_length = (u16) unzipped_len;
- oops_hdr->timestamp = timestamp;
- return 0;
-}
-
static int nvram_pstore_open(struct pstore_info *psi)
{
/* Reset the iterator to start reading partitions again */
@@ -685,10 +656,9 @@
unsigned int err_type, id_no, size = 0;
struct nvram_os_partition *part = NULL;
char *buff = NULL, *big_buff = NULL;
- int rc, sig = 0;
+ int sig = 0;
loff_t p;
-read_partition:
read_type++;
switch (nvram_type_ids[read_type]) {
@@ -749,30 +719,46 @@
*id = id_no;
if (nvram_type_ids[read_type] == PSTORE_TYPE_DMESG) {
+ int length, unzipped_len;
+ size_t hdr_size;
+
oops_hdr = (struct oops_log_info *)buff;
- *buf = buff + sizeof(*oops_hdr);
+ if (oops_hdr->version < OOPS_HDR_VERSION) {
+ /* Old format oops header had 2-byte record size */
+ hdr_size = sizeof(u16);
+ length = oops_hdr->version;
+ time->tv_sec = 0;
+ time->tv_nsec = 0;
+ } else {
+ hdr_size = sizeof(*oops_hdr);
+ length = oops_hdr->report_length;
+ time->tv_sec = oops_hdr->timestamp;
+ time->tv_nsec = 0;
+ }
+ *buf = kmalloc(length, GFP_KERNEL);
+ if (*buf == NULL)
+ return -ENOMEM;
+ memcpy(*buf, buff + hdr_size, length);
+ kfree(buff);
if (err_type == ERR_TYPE_KERNEL_PANIC_GZ) {
big_buff = kmalloc(big_oops_buf_sz, GFP_KERNEL);
if (!big_buff)
return -ENOMEM;
- rc = unzip_oops(buff, big_buff);
+ unzipped_len = nvram_decompress(*buf, big_buff,
+ length, big_oops_buf_sz);
- if (rc != 0) {
- kfree(buff);
+ if (unzipped_len < 0) {
+ pr_err("nvram: decompression failed, returned "
+ "rc %d\n", unzipped_len);
kfree(big_buff);
- goto read_partition;
+ } else {
+ *buf = big_buff;
+ length = unzipped_len;
}
-
- oops_hdr = (struct oops_log_info *)big_buff;
- *buf = big_buff + sizeof(*oops_hdr);
- kfree(buff);
}
-
- time->tv_sec = oops_hdr->timestamp;
- time->tv_nsec = 0;
- return oops_hdr->report_length;
+ return length;
}
*buf = buff;
@@ -816,6 +802,7 @@
static void __init nvram_init_oops_partition(int rtas_partition_exists)
{
int rc;
+ size_t size;
rc = pseries_nvram_init_os_partition(&oops_log_partition);
if (rc != 0) {
@@ -844,8 +831,9 @@
big_oops_buf_sz = (oops_data_sz * 100) / 45;
big_oops_buf = kmalloc(big_oops_buf_sz, GFP_KERNEL);
if (big_oops_buf) {
- stream.workspace = kmalloc(zlib_deflate_workspacesize(
- WINDOW_BITS, MEM_LEVEL), GFP_KERNEL);
+ size = max(zlib_deflate_workspacesize(WINDOW_BITS, MEM_LEVEL),
+ zlib_inflate_workspacesize());
+ stream.workspace = kmalloc(size, GFP_KERNEL);
if (!stream.workspace) {
pr_err("nvram: No memory for compression workspace; "
"skipping compression of %s partition data\n",
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 22f75b5..8a4cae7 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -118,6 +118,7 @@
select HAVE_FUNCTION_TRACE_MCOUNT_TEST
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_GZIP
+ select HAVE_KERNEL_LZ4
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
@@ -227,11 +228,12 @@
not work on older machines.
config MARCH_ZEC12
- bool "IBM zEC12"
+ bool "IBM zBC12 and zEC12"
select HAVE_MARCH_ZEC12_FEATURES if 64BIT
help
- Select this to enable optimizations for IBM zEC12 (2827 series). The
- kernel will be slightly faster but will not work on older machines.
+ Select this to enable optimizations for IBM zBC12 and zEC12 (2828 and
+ 2827 series). The kernel will be slightly faster but will not work on
+ older machines.
endchoice
@@ -709,6 +711,7 @@
def_bool y
prompt "s390 support for virtio devices"
depends on 64BIT
+ select TTY
select VIRTUALIZATION
select VIRTIO
select VIRTIO_CONSOLE
diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile
index 3ad8f61..866ecbe 100644
--- a/arch/s390/boot/compressed/Makefile
+++ b/arch/s390/boot/compressed/Makefile
@@ -6,9 +6,9 @@
BITS := $(if $(CONFIG_64BIT),64,31)
-targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \
- vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo misc.o piggy.o \
- sizes.h head$(BITS).o
+targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2
+targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4
+targets += misc.o piggy.o sizes.h head$(BITS).o
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2
KBUILD_CFLAGS += -DDISABLE_BRANCH_PROFILING
@@ -48,6 +48,7 @@
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZ4) := lz4
suffix-$(CONFIG_KERNEL_LZMA) := lzma
suffix-$(CONFIG_KERNEL_LZO) := lzo
suffix-$(CONFIG_KERNEL_XZ) := xz
@@ -56,6 +57,8 @@
$(call if_changed,gzip)
$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
$(call if_changed,bzip2)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+ $(call if_changed,lz4)
$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
$(call if_changed,lzma)
$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c
index c4c6a1c..57cbaff 100644
--- a/arch/s390/boot/compressed/misc.c
+++ b/arch/s390/boot/compressed/misc.c
@@ -47,6 +47,10 @@
#include "../../../../lib/decompress_bunzip2.c"
#endif
+#ifdef CONFIG_KERNEL_LZ4
+#include "../../../../lib/decompress_unlz4.c"
+#endif
+
#ifdef CONFIG_KERNEL_LZMA
#include "../../../../lib/decompress_unlzma.c"
#endif
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index 4d8604e..7d46767 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -693,7 +693,7 @@
size -= offset;
p = addr + offset / BITS_PER_LONG;
if (bit) {
- set = __flo_word(0, *p & (~0UL << bit));
+ set = __flo_word(0, *p & (~0UL >> bit));
if (set >= size)
return size + offset;
if (set < BITS_PER_LONG)
diff --git a/arch/s390/kernel/perf_event.c b/arch/s390/kernel/perf_event.c
index a6fc037..500aa10 100644
--- a/arch/s390/kernel/perf_event.c
+++ b/arch/s390/kernel/perf_event.c
@@ -52,12 +52,13 @@
static bool is_in_guest(struct pt_regs *regs)
{
- unsigned long ip = instruction_pointer(regs);
-
if (user_mode(regs))
return false;
-
- return ip == (unsigned long) &sie_exit;
+#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
+ return instruction_pointer(regs) == (unsigned long) &sie_exit;
+#else
+ return false;
+#endif
}
static unsigned long guest_is_user_mode(struct pt_regs *regs)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 497451e..aeed8a6 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -994,6 +994,7 @@
strcpy(elf_platform, "z196");
break;
case 0x2827:
+ case 0x2828:
strcpy(elf_platform, "zEC12");
break;
}
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index ba694d2..34c1c9a 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -702,14 +702,25 @@
return rc;
vcpu->arch.sie_block->icptcode = 0;
- preempt_disable();
- kvm_guest_enter();
- preempt_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
trace_kvm_s390_sie_enter(vcpu,
atomic_read(&vcpu->arch.sie_block->cpuflags));
+
+ /*
+ * As PF_VCPU will be used in fault handler, between guest_enter
+ * and guest_exit should be no uaccess.
+ */
+ preempt_disable();
+ kvm_guest_enter();
+ preempt_enable();
rc = sie64a(vcpu->arch.sie_block, vcpu->run->s.regs.gprs);
+ kvm_guest_exit();
+
+ VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
+ vcpu->arch.sie_block->icptcode);
+ trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
+
if (rc > 0)
rc = 0;
if (rc < 0) {
@@ -721,10 +732,6 @@
rc = kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
}
}
- VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
- vcpu->arch.sie_block->icptcode);
- trace_kvm_s390_sie_exit(vcpu, vcpu->arch.sie_block->icptcode);
- kvm_guest_exit();
memcpy(&vcpu->run->s.regs.gprs[14], &vcpu->arch.sie_block->gg14, 16);
return rc;
diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c
index 0da3e6e..4cdc54e 100644
--- a/arch/s390/kvm/priv.c
+++ b/arch/s390/kvm/priv.c
@@ -16,6 +16,7 @@
#include <linux/errno.h>
#include <linux/compat.h>
#include <asm/asm-offsets.h>
+#include <asm/facility.h>
#include <asm/current.h>
#include <asm/debug.h>
#include <asm/ebcdic.h>
@@ -532,8 +533,7 @@
return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
/* Only provide non-quiescing support if the host supports it */
- if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ &&
- S390_lowcore.stfl_fac_list & 0x00020000)
+ if (vcpu->run->s.regs.gprs[reg1] & PFMF_NQ && !test_facility(14))
return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION);
/* No support for conditional-SSKE */
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index ce36ea8..ad446b0 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -69,6 +69,7 @@
order = 2;
break;
case 0x2827: /* zEC12 */
+ case 0x2828: /* zEC12 */
default:
order = 5;
break;
diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c
index ffeb17c..930783d 100644
--- a/arch/s390/oprofile/init.c
+++ b/arch/s390/oprofile/init.c
@@ -440,7 +440,7 @@
switch (id.machine) {
case 0x2097: case 0x2098: ops->cpu_type = "s390/z10"; break;
case 0x2817: case 0x2818: ops->cpu_type = "s390/z196"; break;
- case 0x2827: ops->cpu_type = "s390/zEC12"; break;
+ case 0x2827: case 0x2828: ops->cpu_type = "s390/zEC12"; break;
default: return -ENODEV;
}
}
diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c
index d606463..b7388a4 100644
--- a/arch/x86/boot/compressed/eboot.c
+++ b/arch/x86/boot/compressed/eboot.c
@@ -225,7 +225,7 @@
unsigned long nr_pages;
nr_pages = round_up(size, EFI_PAGE_SIZE) / EFI_PAGE_SIZE;
- efi_call_phys2(sys_table->boottime->free_pages, addr, size);
+ efi_call_phys2(sys_table->boottime->free_pages, addr, nr_pages);
}
static void find_bits(unsigned long mask, u8 *pos, u8 *size)
diff --git a/arch/x86/kernel/early-quirks.c b/arch/x86/kernel/early-quirks.c
index 94ab6b9..63bdb29 100644
--- a/arch/x86/kernel/early-quirks.c
+++ b/arch/x86/kernel/early-quirks.c
@@ -196,15 +196,23 @@
static void __init intel_remapping_check(int num, int slot, int func)
{
u8 revision;
+ u16 device;
+ device = read_pci_config_16(num, slot, func, PCI_DEVICE_ID);
revision = read_pci_config_byte(num, slot, func, PCI_REVISION_ID);
/*
- * Revision 0x13 of this chipset supports irq remapping
- * but has an erratum that breaks its behavior, flag it as such
+ * Revision 13 of all triggering devices id in this quirk have
+ * a problem draining interrupts when irq remapping is enabled,
+ * and should be flagged as broken. Additionally revisions 0x12
+ * and 0x22 of device id 0x3405 has this problem.
*/
if (revision == 0x13)
set_irq_remapping_broken();
+ else if ((device == 0x3405) &&
+ ((revision == 0x12) ||
+ (revision == 0x22)))
+ set_irq_remapping_broken();
}
@@ -239,6 +247,8 @@
PCI_CLASS_SERIAL_SMBUS, PCI_ANY_ID, 0, ati_bugs_contd },
{ PCI_VENDOR_ID_INTEL, 0x3403, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
+ { PCI_VENDOR_ID_INTEL, 0x3405, PCI_CLASS_BRIDGE_HOST,
+ PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{ PCI_VENDOR_ID_INTEL, 0x3406, PCI_CLASS_BRIDGE_HOST,
PCI_BASE_CLASS_BRIDGE, 0, intel_remapping_check },
{}
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index 202d24f..5d576ab 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -116,7 +116,7 @@
if (cpu_has_fxsr) {
memset(&fx_scratch, 0, sizeof(struct i387_fxsave_struct));
- asm volatile("fxsave %0" : : "m" (fx_scratch));
+ asm volatile("fxsave %0" : "+m" (fx_scratch));
mask = fx_scratch.mxcsr_mask;
if (mask == 0)
mask = 0x0000ffbf;
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index 47ebb1d..7a0adb7 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -220,12 +220,13 @@
return 0;
}
- if (__apply_microcode_amd(mc_amd))
+ if (__apply_microcode_amd(mc_amd)) {
pr_err("CPU%d: update failed for patch_level=0x%08x\n",
cpu, mc_amd->hdr.patch_id);
- else
- pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
- mc_amd->hdr.patch_id);
+ return -1;
+ }
+ pr_info("CPU%d: new patch_level=0x%08x\n", cpu,
+ mc_amd->hdr.patch_id);
uci->cpu_sig.rev = mc_amd->hdr.patch_id;
c->microcode = mc_amd->hdr.patch_id;
diff --git a/drivers/acpi/acpi_processor.c b/drivers/acpi/acpi_processor.c
index fd6c51c..5a74a9c 100644
--- a/drivers/acpi/acpi_processor.c
+++ b/drivers/acpi/acpi_processor.c
@@ -451,7 +451,6 @@
/* Clean up. */
per_cpu(processor_device_array, pr->id) = NULL;
per_cpu(processors, pr->id) = NULL;
- try_offline_node(cpu_to_node(pr->id));
/* Remove the CPU. */
get_online_cpus();
@@ -459,6 +458,8 @@
acpi_unmap_lsapic(pr->id);
put_online_cpus();
+ try_offline_node(cpu_to_node(pr->id));
+
out:
free_cpumask_var(pr->throttling.shared_cpu_map);
kfree(pr);
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index f680957..408f6b2 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -31,6 +31,7 @@
static DECLARE_RWSEM(bus_type_sem);
#define PHYSICAL_NODE_STRING "physical_node"
+#define PHYSICAL_NODE_NAME_SIZE (sizeof(PHYSICAL_NODE_STRING) + 10)
int register_acpi_bus_type(struct acpi_bus_type *type)
{
@@ -78,41 +79,108 @@
return ret;
}
-static acpi_status do_acpi_find_child(acpi_handle handle, u32 lvl_not_used,
- void *addr_p, void **ret_p)
+static acpi_status acpi_dev_present(acpi_handle handle, u32 lvl_not_used,
+ void *not_used, void **ret_p)
{
- unsigned long long addr, sta;
- acpi_status status;
+ struct acpi_device *adev = NULL;
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr);
- if (ACPI_SUCCESS(status) && addr == *((u64 *)addr_p)) {
+ acpi_bus_get_device(handle, &adev);
+ if (adev) {
*ret_p = handle;
- status = acpi_bus_get_status_handle(handle, &sta);
- if (ACPI_SUCCESS(status) && (sta & ACPI_STA_DEVICE_ENABLED))
- return AE_CTRL_TERMINATE;
+ return AE_CTRL_TERMINATE;
}
return AE_OK;
}
-acpi_handle acpi_get_child(acpi_handle parent, u64 address)
+static bool acpi_extra_checks_passed(acpi_handle handle, bool is_bridge)
{
- void *ret = NULL;
+ unsigned long long sta;
+ acpi_status status;
- if (!parent)
- return NULL;
+ status = acpi_bus_get_status_handle(handle, &sta);
+ if (ACPI_FAILURE(status) || !(sta & ACPI_STA_DEVICE_ENABLED))
+ return false;
- acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, NULL,
- do_acpi_find_child, &address, &ret);
- return (acpi_handle)ret;
+ if (is_bridge) {
+ void *test = NULL;
+
+ /* Check if this object has at least one child device. */
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+ acpi_dev_present, NULL, NULL, &test);
+ return !!test;
+ }
+ return true;
}
-EXPORT_SYMBOL(acpi_get_child);
+
+struct find_child_context {
+ u64 addr;
+ bool is_bridge;
+ acpi_handle ret;
+ bool ret_checked;
+};
+
+static acpi_status do_find_child(acpi_handle handle, u32 lvl_not_used,
+ void *data, void **not_used)
+{
+ struct find_child_context *context = data;
+ unsigned long long addr;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL, &addr);
+ if (ACPI_FAILURE(status) || addr != context->addr)
+ return AE_OK;
+
+ if (!context->ret) {
+ /* This is the first matching object. Save its handle. */
+ context->ret = handle;
+ return AE_OK;
+ }
+ /*
+ * There is more than one matching object with the same _ADR value.
+ * That really is unexpected, so we are kind of beyond the scope of the
+ * spec here. We have to choose which one to return, though.
+ *
+ * First, check if the previously found object is good enough and return
+ * its handle if so. Second, check the same for the object that we've
+ * just found.
+ */
+ if (!context->ret_checked) {
+ if (acpi_extra_checks_passed(context->ret, context->is_bridge))
+ return AE_CTRL_TERMINATE;
+ else
+ context->ret_checked = true;
+ }
+ if (acpi_extra_checks_passed(handle, context->is_bridge)) {
+ context->ret = handle;
+ return AE_CTRL_TERMINATE;
+ }
+ return AE_OK;
+}
+
+acpi_handle acpi_find_child(acpi_handle parent, u64 addr, bool is_bridge)
+{
+ if (parent) {
+ struct find_child_context context = {
+ .addr = addr,
+ .is_bridge = is_bridge,
+ };
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, parent, 1, do_find_child,
+ NULL, &context, NULL);
+ return context.ret;
+ }
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(acpi_find_child);
int acpi_bind_one(struct device *dev, acpi_handle handle)
{
struct acpi_device *acpi_dev;
acpi_status status;
struct acpi_device_physical_node *physical_node, *pn;
- char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
+ char physical_node_name[PHYSICAL_NODE_NAME_SIZE];
+ struct list_head *physnode_list;
+ unsigned int node_id;
int retval = -EINVAL;
if (ACPI_HANDLE(dev)) {
@@ -139,25 +207,27 @@
mutex_lock(&acpi_dev->physical_node_lock);
- /* Sanity check. */
- list_for_each_entry(pn, &acpi_dev->physical_node_list, node)
+ /*
+ * Keep the list sorted by node_id so that the IDs of removed nodes can
+ * be recycled easily.
+ */
+ physnode_list = &acpi_dev->physical_node_list;
+ node_id = 0;
+ list_for_each_entry(pn, &acpi_dev->physical_node_list, node) {
+ /* Sanity check. */
if (pn->dev == dev) {
dev_warn(dev, "Already associated with ACPI node\n");
goto err_free;
}
-
- /* allocate physical node id according to physical_node_id_bitmap */
- physical_node->node_id =
- find_first_zero_bit(acpi_dev->physical_node_id_bitmap,
- ACPI_MAX_PHYSICAL_NODE);
- if (physical_node->node_id >= ACPI_MAX_PHYSICAL_NODE) {
- retval = -ENOSPC;
- goto err_free;
+ if (pn->node_id == node_id) {
+ physnode_list = &pn->node;
+ node_id++;
+ }
}
- set_bit(physical_node->node_id, acpi_dev->physical_node_id_bitmap);
+ physical_node->node_id = node_id;
physical_node->dev = dev;
- list_add_tail(&physical_node->node, &acpi_dev->physical_node_list);
+ list_add(&physical_node->node, physnode_list);
acpi_dev->physical_node_count++;
mutex_unlock(&acpi_dev->physical_node_lock);
@@ -208,7 +278,7 @@
mutex_lock(&acpi_dev->physical_node_lock);
list_for_each_safe(node, next, &acpi_dev->physical_node_list) {
- char physical_node_name[sizeof(PHYSICAL_NODE_STRING) + 2];
+ char physical_node_name[PHYSICAL_NODE_NAME_SIZE];
entry = list_entry(node, struct acpi_device_physical_node,
node);
@@ -216,7 +286,6 @@
continue;
list_del(node);
- clear_bit(entry->node_id, acpi_dev->physical_node_id_bitmap);
acpi_dev->physical_node_count--;
diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c
index aa1227a..04a1378 100644
--- a/drivers/acpi/proc.c
+++ b/drivers/acpi/proc.c
@@ -311,6 +311,8 @@
dev->pnp.bus_id,
(u32) dev->wakeup.sleep_state);
+ mutex_lock(&dev->physical_node_lock);
+
if (!dev->physical_node_count) {
seq_printf(seq, "%c%-8s\n",
dev->wakeup.flags.run_wake ? '*' : ' ',
@@ -338,6 +340,8 @@
put_device(ldev);
}
}
+
+ mutex_unlock(&dev->physical_node_lock);
}
mutex_unlock(&acpi_device_lock);
return 0;
@@ -347,12 +351,16 @@
{
struct acpi_device_physical_node *entry;
+ mutex_lock(&adev->physical_node_lock);
+
list_for_each_entry(entry,
&adev->physical_node_list, node)
if (entry->dev && device_can_wakeup(entry->dev)) {
bool enable = !device_may_wakeup(entry->dev);
device_set_wakeup_enable(entry->dev, enable);
}
+
+ mutex_unlock(&adev->physical_node_lock);
}
static ssize_t
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index 0ec434d..e1284b8 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -689,7 +689,7 @@
* Some systems always report current brightness level as maximum
* through _BQC, we need to test another value for them.
*/
- test_level = current_level == max_level ? br->levels[2] : max_level;
+ test_level = current_level == max_level ? br->levels[3] : max_level;
result = acpi_video_device_lcd_set_level(device, test_level);
if (result)
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
index 4ec7c04..26386f0 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -237,6 +237,7 @@
/* sentinel */
}
};
+MODULE_DEVICE_TABLE(of, imx_pata_dt_ids);
static struct platform_driver pata_imx_driver = {
.probe = pata_imx_probe,
diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c
index e691026..3455f83 100644
--- a/drivers/base/regmap/regcache.c
+++ b/drivers/base/regmap/regcache.c
@@ -719,7 +719,8 @@
}
}
- return regcache_sync_block_raw_flush(map, &data, base, regtmp);
+ return regcache_sync_block_raw_flush(map, &data, base, regtmp +
+ map->reg_stride);
}
int regcache_sync_block(struct regmap *map, void *block,
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index 1b456fe..fc45567 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -272,9 +272,12 @@
unsigned long flags;
spin_lock_irqsave(&portdev->ports_lock, flags);
- list_for_each_entry(port, &portdev->ports, list)
- if (port->cdev->dev == dev)
+ list_for_each_entry(port, &portdev->ports, list) {
+ if (port->cdev->dev == dev) {
+ kref_get(&port->kref);
goto out;
+ }
+ }
port = NULL;
out:
spin_unlock_irqrestore(&portdev->ports_lock, flags);
@@ -746,6 +749,10 @@
port = filp->private_data;
+ /* Port is hot-unplugged. */
+ if (!port->guest_connected)
+ return -ENODEV;
+
if (!port_has_data(port)) {
/*
* If nothing's connected on the host just return 0 in
@@ -762,7 +769,7 @@
if (ret < 0)
return ret;
}
- /* Port got hot-unplugged. */
+ /* Port got hot-unplugged while we were waiting above. */
if (!port->guest_connected)
return -ENODEV;
/*
@@ -932,13 +939,25 @@
if (is_rproc_serial(port->out_vq->vdev))
return -EINVAL;
+ /*
+ * pipe->nrbufs == 0 means there are no data to transfer,
+ * so this returns just 0 for no data.
+ */
+ pipe_lock(pipe);
+ if (!pipe->nrbufs) {
+ ret = 0;
+ goto error_out;
+ }
+
ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK);
if (ret < 0)
- return ret;
+ goto error_out;
buf = alloc_buf(port->out_vq, 0, pipe->nrbufs);
- if (!buf)
- return -ENOMEM;
+ if (!buf) {
+ ret = -ENOMEM;
+ goto error_out;
+ }
sgl.n = 0;
sgl.len = 0;
@@ -946,12 +965,17 @@
sgl.sg = buf->sg;
sg_init_table(sgl.sg, sgl.size);
ret = __splice_from_pipe(pipe, &sd, pipe_to_sg);
+ pipe_unlock(pipe);
if (likely(ret > 0))
ret = __send_to_port(port, buf->sg, sgl.n, sgl.len, buf, true);
if (unlikely(ret <= 0))
free_buf(buf, true);
return ret;
+
+error_out:
+ pipe_unlock(pipe);
+ return ret;
}
static unsigned int port_fops_poll(struct file *filp, poll_table *wait)
@@ -1019,14 +1043,14 @@
struct port *port;
int ret;
+ /* We get the port with a kref here */
port = find_port_by_devt(cdev->dev);
+ if (!port) {
+ /* Port was unplugged before we could proceed */
+ return -ENXIO;
+ }
filp->private_data = port;
- /* Prevent against a port getting hot-unplugged at the same time */
- spin_lock_irq(&port->portdev->ports_lock);
- kref_get(&port->kref);
- spin_unlock_irq(&port->portdev->ports_lock);
-
/*
* Don't allow opening of console port devices -- that's done
* via /dev/hvc
@@ -1498,14 +1522,6 @@
port = container_of(kref, struct port, kref);
- sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
- device_destroy(pdrvdata.class, port->dev->devt);
- cdev_del(port->cdev);
-
- kfree(port->name);
-
- debugfs_remove(port->debugfs_file);
-
kfree(port);
}
@@ -1539,12 +1555,14 @@
spin_unlock_irq(&port->portdev->ports_lock);
if (port->guest_connected) {
- port->guest_connected = false;
- port->host_connected = false;
- wake_up_interruptible(&port->waitqueue);
-
/* Let the app know the port is going down. */
send_sigio_to_port(port);
+
+ /* Do this after sigio is actually sent */
+ port->guest_connected = false;
+ port->host_connected = false;
+
+ wake_up_interruptible(&port->waitqueue);
}
if (is_console_port(port)) {
@@ -1563,6 +1581,14 @@
*/
port->portdev = NULL;
+ sysfs_remove_group(&port->dev->kobj, &port_attribute_group);
+ device_destroy(pdrvdata.class, port->dev->devt);
+ cdev_del(port->cdev);
+
+ kfree(port->name);
+
+ debugfs_remove(port->debugfs_file);
+
/*
* Locks around here are not necessary - a port can't be
* opened after we removed the port struct from ports_list
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index 0ceb2ef..f97cb3d 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -221,8 +221,8 @@
return count;
}
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+ const char *buf, size_t count)
{
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input, j;
@@ -235,10 +235,10 @@
if (input > 1)
input = 1;
- if (input == cs_tuners->ignore_nice) /* nothing to do */
+ if (input == cs_tuners->ignore_nice_load) /* nothing to do */
return count;
- cs_tuners->ignore_nice = input;
+ cs_tuners->ignore_nice_load = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
@@ -246,7 +246,7 @@
dbs_info = &per_cpu(cs_cpu_dbs_info, j);
dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
&dbs_info->cdbs.prev_cpu_wall, 0);
- if (cs_tuners->ignore_nice)
+ if (cs_tuners->ignore_nice_load)
dbs_info->cdbs.prev_cpu_nice =
kcpustat_cpu(j).cpustat[CPUTIME_NICE];
}
@@ -279,7 +279,7 @@
show_store_one(cs, sampling_down_factor);
show_store_one(cs, up_threshold);
show_store_one(cs, down_threshold);
-show_store_one(cs, ignore_nice);
+show_store_one(cs, ignore_nice_load);
show_store_one(cs, freq_step);
declare_show_sampling_rate_min(cs);
@@ -287,7 +287,7 @@
gov_sys_pol_attr_rw(sampling_down_factor);
gov_sys_pol_attr_rw(up_threshold);
gov_sys_pol_attr_rw(down_threshold);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
gov_sys_pol_attr_rw(freq_step);
gov_sys_pol_attr_ro(sampling_rate_min);
@@ -297,7 +297,7 @@
&sampling_down_factor_gov_sys.attr,
&up_threshold_gov_sys.attr,
&down_threshold_gov_sys.attr,
- &ignore_nice_gov_sys.attr,
+ &ignore_nice_load_gov_sys.attr,
&freq_step_gov_sys.attr,
NULL
};
@@ -313,7 +313,7 @@
&sampling_down_factor_gov_pol.attr,
&up_threshold_gov_pol.attr,
&down_threshold_gov_pol.attr,
- &ignore_nice_gov_pol.attr,
+ &ignore_nice_load_gov_pol.attr,
&freq_step_gov_pol.attr,
NULL
};
@@ -338,7 +338,7 @@
tuners->up_threshold = DEF_FREQUENCY_UP_THRESHOLD;
tuners->down_threshold = DEF_FREQUENCY_DOWN_THRESHOLD;
tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
- tuners->ignore_nice = 0;
+ tuners->ignore_nice_load = 0;
tuners->freq_step = DEF_FREQUENCY_STEP;
dbs_data->tuners = tuners;
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 7b839a8..e59afaa 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -47,9 +47,9 @@
unsigned int j;
if (dbs_data->cdata->governor == GOV_ONDEMAND)
- ignore_nice = od_tuners->ignore_nice;
+ ignore_nice = od_tuners->ignore_nice_load;
else
- ignore_nice = cs_tuners->ignore_nice;
+ ignore_nice = cs_tuners->ignore_nice_load;
policy = cdbs->cur_policy;
@@ -298,12 +298,12 @@
cs_tuners = dbs_data->tuners;
cs_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
sampling_rate = cs_tuners->sampling_rate;
- ignore_nice = cs_tuners->ignore_nice;
+ ignore_nice = cs_tuners->ignore_nice_load;
} else {
od_tuners = dbs_data->tuners;
od_dbs_info = dbs_data->cdata->get_cpu_dbs_info_s(cpu);
sampling_rate = od_tuners->sampling_rate;
- ignore_nice = od_tuners->ignore_nice;
+ ignore_nice = od_tuners->ignore_nice_load;
od_ops = dbs_data->cdata->gov_ops;
io_busy = od_tuners->io_is_busy;
}
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 6663ec3..d5f12b4 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -165,7 +165,7 @@
/* Per policy Governers sysfs tunables */
struct od_dbs_tuners {
- unsigned int ignore_nice;
+ unsigned int ignore_nice_load;
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
@@ -175,7 +175,7 @@
};
struct cs_dbs_tuners {
- unsigned int ignore_nice;
+ unsigned int ignore_nice_load;
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index 93eb5cb..c087347 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -403,8 +403,8 @@
return count;
}
-static ssize_t store_ignore_nice(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
+ const char *buf, size_t count)
{
struct od_dbs_tuners *od_tuners = dbs_data->tuners;
unsigned int input;
@@ -419,10 +419,10 @@
if (input > 1)
input = 1;
- if (input == od_tuners->ignore_nice) { /* nothing to do */
+ if (input == od_tuners->ignore_nice_load) { /* nothing to do */
return count;
}
- od_tuners->ignore_nice = input;
+ od_tuners->ignore_nice_load = input;
/* we need to re-evaluate prev_cpu_idle */
for_each_online_cpu(j) {
@@ -430,7 +430,7 @@
dbs_info = &per_cpu(od_cpu_dbs_info, j);
dbs_info->cdbs.prev_cpu_idle = get_cpu_idle_time(j,
&dbs_info->cdbs.prev_cpu_wall, od_tuners->io_is_busy);
- if (od_tuners->ignore_nice)
+ if (od_tuners->ignore_nice_load)
dbs_info->cdbs.prev_cpu_nice =
kcpustat_cpu(j).cpustat[CPUTIME_NICE];
@@ -461,7 +461,7 @@
show_store_one(od, io_is_busy);
show_store_one(od, up_threshold);
show_store_one(od, sampling_down_factor);
-show_store_one(od, ignore_nice);
+show_store_one(od, ignore_nice_load);
show_store_one(od, powersave_bias);
declare_show_sampling_rate_min(od);
@@ -469,7 +469,7 @@
gov_sys_pol_attr_rw(io_is_busy);
gov_sys_pol_attr_rw(up_threshold);
gov_sys_pol_attr_rw(sampling_down_factor);
-gov_sys_pol_attr_rw(ignore_nice);
+gov_sys_pol_attr_rw(ignore_nice_load);
gov_sys_pol_attr_rw(powersave_bias);
gov_sys_pol_attr_ro(sampling_rate_min);
@@ -478,7 +478,7 @@
&sampling_rate_gov_sys.attr,
&up_threshold_gov_sys.attr,
&sampling_down_factor_gov_sys.attr,
- &ignore_nice_gov_sys.attr,
+ &ignore_nice_load_gov_sys.attr,
&powersave_bias_gov_sys.attr,
&io_is_busy_gov_sys.attr,
NULL
@@ -494,7 +494,7 @@
&sampling_rate_gov_pol.attr,
&up_threshold_gov_pol.attr,
&sampling_down_factor_gov_pol.attr,
- &ignore_nice_gov_pol.attr,
+ &ignore_nice_load_gov_pol.attr,
&powersave_bias_gov_pol.attr,
&io_is_busy_gov_pol.attr,
NULL
@@ -544,7 +544,7 @@
}
tuners->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR;
- tuners->ignore_nice = 0;
+ tuners->ignore_nice_load = 0;
tuners->powersave_bias = default_powersave_bias;
tuners->io_is_busy = should_io_be_busy();
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index bb838b9..9536852c 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -118,11 +118,6 @@
clk_put(cpuclk);
return -EINVAL;
}
- ret = clk_set_rate(cpuclk, rate);
- if (ret) {
- clk_put(cpuclk);
- return ret;
- }
/* clock table init */
for (i = 2;
@@ -130,6 +125,12 @@
i++)
loongson2_clockmod_table[i].frequency = (rate * i) / 8;
+ ret = clk_set_rate(cpuclk, rate);
+ if (ret) {
+ clk_put(cpuclk);
+ return ret;
+ }
+
policy->cur = loongson2_cpufreq_get(policy->cpu);
cpufreq_frequency_table_get_attr(&loongson2_clockmod_table[0],
diff --git a/drivers/dma/sh/shdma.c b/drivers/dma/sh/shdma.c
index b67f45f..5039fbc 100644
--- a/drivers/dma/sh/shdma.c
+++ b/drivers/dma/sh/shdma.c
@@ -400,8 +400,8 @@
shdma_chan);
struct sh_dmae_desc *sh_desc = container_of(sdesc,
struct sh_dmae_desc, shdma_desc);
- return (sh_desc->hw.tcr - sh_dmae_readl(sh_chan, TCR)) <<
- sh_chan->xmit_shift;
+ return sh_desc->hw.tcr -
+ (sh_dmae_readl(sh_chan, TCR) << sh_chan->xmit_shift);
}
/* Called from error IRQ or NMI */
diff --git a/drivers/gpu/drm/ast/ast_ttm.c b/drivers/gpu/drm/ast/ast_ttm.c
index 98d6708..6e8887fe 100644
--- a/drivers/gpu/drm/ast/ast_ttm.c
+++ b/drivers/gpu/drm/ast/ast_ttm.c
@@ -323,6 +323,7 @@
astbo->gem.driver_private = NULL;
astbo->bo.bdev = &ast->ttm.bdev;
+ astbo->bo.bdev->dev_mapping = dev->dev_mapping;
ast_ttm_placement(astbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
diff --git a/drivers/gpu/drm/cirrus/cirrus_ttm.c b/drivers/gpu/drm/cirrus/cirrus_ttm.c
index 0047012..69fd8f1 100644
--- a/drivers/gpu/drm/cirrus/cirrus_ttm.c
+++ b/drivers/gpu/drm/cirrus/cirrus_ttm.c
@@ -328,6 +328,7 @@
cirrusbo->gem.driver_private = NULL;
cirrusbo->bo.bdev = &cirrus->ttm.bdev;
+ cirrusbo->bo.bdev->dev_mapping = dev->dev_mapping;
cirrus_ttm_placement(cirrusbo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c
index 8bcce78..f92da0a 100644
--- a/drivers/gpu/drm/drm_irq.c
+++ b/drivers/gpu/drm/drm_irq.c
@@ -708,7 +708,10 @@
/* Subtract time delta from raw timestamp to get final
* vblank_time timestamp for end of vblank.
*/
- etime = ktime_sub_ns(etime, delta_ns);
+ if (delta_ns < 0)
+ etime = ktime_add_ns(etime, -delta_ns);
+ else
+ etime = ktime_sub_ns(etime, delta_ns);
*vblank_time = ktime_to_timeval(etime);
DRM_DEBUG("crtc %d : v %d p(%d,%d)@ %ld.%ld -> %ld.%ld [e %d us, %d rep]\n",
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index f2326fc..6f51429 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1856,10 +1856,16 @@
#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2)
#define PORT_HOTPLUG_STAT (dev_priv->info->display_mmio_offset + 0x61114)
-/* HDMI/DP bits are gen4+ */
-#define PORTB_HOTPLUG_LIVE_STATUS (1 << 29)
+/*
+ * HDMI/DP bits are gen4+
+ *
+ * WARNING: Bspec for hpd status bits on gen4 seems to be completely confused.
+ * Please check the detailed lore in the commit message for for experimental
+ * evidence.
+ */
+#define PORTD_HOTPLUG_LIVE_STATUS (1 << 29)
#define PORTC_HOTPLUG_LIVE_STATUS (1 << 28)
-#define PORTD_HOTPLUG_LIVE_STATUS (1 << 27)
+#define PORTB_HOTPLUG_LIVE_STATUS (1 << 27)
#define PORTD_HOTPLUG_INT_STATUS (3 << 21)
#define PORTC_HOTPLUG_INT_STATUS (3 << 19)
#define PORTB_HOTPLUG_INT_STATUS (3 << 17)
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 5fb3058..e38b457 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -8269,9 +8269,11 @@
list_for_each_entry(encoder, &dev->mode_config.encoder_list,
base.head) {
+ enum pipe pipe;
if (encoder->base.crtc != &crtc->base)
continue;
- if (encoder->get_config)
+ if (encoder->get_config &&
+ encoder->get_hw_state(encoder, &pipe))
encoder->get_config(encoder, &pipe_config);
}
diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c
index 67e2c1f..5950888 100644
--- a/drivers/gpu/drm/i915/intel_panel.c
+++ b/drivers/gpu/drm/i915/intel_panel.c
@@ -497,8 +497,11 @@
goto out;
}
- /* scale to hardware */
- level = level * freq / max;
+ /* scale to hardware, but be careful to not overflow */
+ if (freq < max)
+ level = level * freq / max;
+ else
+ level = freq / max * level;
dev_priv->backlight.level = level;
if (dev_priv->backlight.device)
@@ -515,6 +518,17 @@
struct drm_i915_private *dev_priv = dev->dev_private;
unsigned long flags;
+ /*
+ * Do not disable backlight on the vgaswitcheroo path. When switching
+ * away from i915, the other client may depend on i915 to handle the
+ * backlight. This will leave the backlight on unnecessarily when
+ * another client is not activated.
+ */
+ if (dev->switch_power_state == DRM_SWITCH_POWER_CHANGING) {
+ DRM_DEBUG_DRIVER("Skipping backlight disable on vga switch\n");
+ return;
+ }
+
spin_lock_irqsave(&dev_priv->backlight.lock, flags);
dev_priv->backlight.enabled = false;
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index f895d15..b0e4a0b 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -5063,8 +5063,26 @@
}
} else {
if (enable_requested) {
+ unsigned long irqflags;
+ enum pipe p;
+
I915_WRITE(HSW_PWR_WELL_DRIVER, 0);
+ POSTING_READ(HSW_PWR_WELL_DRIVER);
DRM_DEBUG_KMS("Requesting to disable the power well\n");
+
+ /*
+ * After this, the registers on the pipes that are part
+ * of the power well will become zero, so we have to
+ * adjust our counters according to that.
+ *
+ * FIXME: Should we do this in general in
+ * drm_vblank_post_modeset?
+ */
+ spin_lock_irqsave(&dev->vbl_lock, irqflags);
+ for_each_pipe(p)
+ if (p != PIPE_A)
+ dev->last_vblank[p] = 0;
+ spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
}
}
}
diff --git a/drivers/gpu/drm/mgag200/mgag200_ttm.c b/drivers/gpu/drm/mgag200/mgag200_ttm.c
index 13878d5..d70e4a9 100644
--- a/drivers/gpu/drm/mgag200/mgag200_ttm.c
+++ b/drivers/gpu/drm/mgag200/mgag200_ttm.c
@@ -323,6 +323,7 @@
mgabo->gem.driver_private = NULL;
mgabo->bo.bdev = &mdev->ttm.bdev;
+ mgabo->bo.bdev->dev_mapping = dev->dev_mapping;
mgag200_ttm_placement(mgabo, TTM_PL_FLAG_VRAM | TTM_PL_FLAG_SYSTEM);
diff --git a/drivers/gpu/drm/radeon/btc_dpm.c b/drivers/gpu/drm/radeon/btc_dpm.c
index 0bfd55e..9953e1f 100644
--- a/drivers/gpu/drm/radeon/btc_dpm.c
+++ b/drivers/gpu/drm/radeon/btc_dpm.c
@@ -2548,9 +2548,6 @@
{
struct rv7xx_power_info *pi;
struct evergreen_power_info *eg_pi;
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- u16 data_offset, size;
- u8 frev, crev;
struct atom_clock_dividers dividers;
int ret;
@@ -2633,16 +2630,7 @@
eg_pi->vddci_control =
radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0);
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
- pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- pi->dynamic_ss = true;
- }
+ rv770_get_engine_memory_ss(rdev);
pi->asi = RV770_ASI_DFLT;
pi->pasi = CYPRESS_HASI_DFLT;
@@ -2659,8 +2647,7 @@
pi->dynamic_pcie_gen2 = true;
- if (pi->gfx_clock_gating &&
- (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE))
+ if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)
pi->thermal_protection = true;
else
pi->thermal_protection = false;
diff --git a/drivers/gpu/drm/radeon/cik.c b/drivers/gpu/drm/radeon/cik.c
index 6dacec4..8928bd1 100644
--- a/drivers/gpu/drm/radeon/cik.c
+++ b/drivers/gpu/drm/radeon/cik.c
@@ -2587,9 +2587,11 @@
if (rdev->wb.enabled) {
rptr = le32_to_cpu(rdev->wb.wb[ring->rptr_offs/4]);
} else {
+ mutex_lock(&rdev->srbm_mutex);
cik_srbm_select(rdev, ring->me, ring->pipe, ring->queue, 0);
rptr = RREG32(CP_HQD_PQ_RPTR);
cik_srbm_select(rdev, 0, 0, 0, 0);
+ mutex_unlock(&rdev->srbm_mutex);
}
rptr = (rptr & ring->ptr_reg_mask) >> ring->ptr_reg_shift;
@@ -2604,9 +2606,11 @@
if (rdev->wb.enabled) {
wptr = le32_to_cpu(rdev->wb.wb[ring->wptr_offs/4]);
} else {
+ mutex_lock(&rdev->srbm_mutex);
cik_srbm_select(rdev, ring->me, ring->pipe, ring->queue, 0);
wptr = RREG32(CP_HQD_PQ_WPTR);
cik_srbm_select(rdev, 0, 0, 0, 0);
+ mutex_unlock(&rdev->srbm_mutex);
}
wptr = (wptr & ring->ptr_reg_mask) >> ring->ptr_reg_shift;
@@ -2897,6 +2901,7 @@
WREG32(CP_CPF_DEBUG, tmp);
/* init the pipes */
+ mutex_lock(&rdev->srbm_mutex);
for (i = 0; i < (rdev->mec.num_pipe * rdev->mec.num_mec); i++) {
int me = (i < 4) ? 1 : 2;
int pipe = (i < 4) ? i : (i - 4);
@@ -2919,6 +2924,7 @@
WREG32(CP_HPD_EOP_CONTROL, tmp);
}
cik_srbm_select(rdev, 0, 0, 0, 0);
+ mutex_unlock(&rdev->srbm_mutex);
/* init the queues. Just two for now. */
for (i = 0; i < 2; i++) {
@@ -2972,6 +2978,7 @@
mqd->static_thread_mgmt23[0] = 0xffffffff;
mqd->static_thread_mgmt23[1] = 0xffffffff;
+ mutex_lock(&rdev->srbm_mutex);
cik_srbm_select(rdev, rdev->ring[idx].me,
rdev->ring[idx].pipe,
rdev->ring[idx].queue, 0);
@@ -3099,6 +3106,7 @@
WREG32(CP_HQD_ACTIVE, mqd->queue_state.cp_hqd_active);
cik_srbm_select(rdev, 0, 0, 0, 0);
+ mutex_unlock(&rdev->srbm_mutex);
radeon_bo_kunmap(rdev->ring[idx].mqd_obj);
radeon_bo_unreserve(rdev->ring[idx].mqd_obj);
@@ -4320,6 +4328,7 @@
/* XXX SH_MEM regs */
/* where to put LDS, scratch, GPUVM in FSA64 space */
+ mutex_lock(&rdev->srbm_mutex);
for (i = 0; i < 16; i++) {
cik_srbm_select(rdev, 0, 0, 0, i);
/* CP and shaders */
@@ -4335,6 +4344,7 @@
/* XXX SDMA RLC - todo */
}
cik_srbm_select(rdev, 0, 0, 0, 0);
+ mutex_unlock(&rdev->srbm_mutex);
cik_pcie_gart_tlb_flush(rdev);
DRM_INFO("PCIE GART of %uM enabled (table at 0x%016llX).\n",
@@ -5954,6 +5964,8 @@
struct radeon_ring *ring;
int r;
+ cik_mc_program(rdev);
+
if (rdev->flags & RADEON_IS_IGP) {
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
!rdev->mec_fw || !rdev->sdma_fw || !rdev->rlc_fw) {
@@ -5985,7 +5997,6 @@
if (r)
return r;
- cik_mc_program(rdev);
r = cik_pcie_gart_enable(rdev);
if (r)
return r;
@@ -6194,7 +6205,7 @@
radeon_vm_manager_fini(rdev);
cik_cp_enable(rdev, false);
cik_sdma_enable(rdev, false);
- r600_uvd_rbc_stop(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_suspend(rdev);
cik_irq_suspend(rdev);
radeon_wb_disable(rdev);
@@ -6358,6 +6369,7 @@
radeon_vm_manager_fini(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_fini(rdev);
cik_pcie_gart_fini(rdev);
r600_vram_scratch_fini(rdev);
@@ -6978,7 +6990,7 @@
/* programm the VCPU memory controller bits 0-27 */
addr = rdev->uvd.gpu_addr >> 3;
- size = RADEON_GPU_PAGE_ALIGN(rdev->uvd.fw_size + 4) >> 3;
+ size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3;
WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
WREG32(UVD_VCPU_CACHE_SIZE0, size);
diff --git a/drivers/gpu/drm/radeon/cypress_dpm.c b/drivers/gpu/drm/radeon/cypress_dpm.c
index 9bcdd17..7e5d0b5 100644
--- a/drivers/gpu/drm/radeon/cypress_dpm.c
+++ b/drivers/gpu/drm/radeon/cypress_dpm.c
@@ -2038,9 +2038,6 @@
{
struct rv7xx_power_info *pi;
struct evergreen_power_info *eg_pi;
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- uint16_t data_offset, size;
- uint8_t frev, crev;
struct atom_clock_dividers dividers;
int ret;
@@ -2092,16 +2089,7 @@
eg_pi->vddci_control =
radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0);
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
- pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- pi->dynamic_ss = true;
- }
+ rv770_get_engine_memory_ss(rdev);
pi->asi = RV770_ASI_DFLT;
pi->pasi = CYPRESS_HASI_DFLT;
@@ -2122,8 +2110,7 @@
pi->dynamic_pcie_gen2 = true;
- if (pi->gfx_clock_gating &&
- (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE))
+ if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)
pi->thermal_protection = true;
else
pi->thermal_protection = false;
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index 038dcac..d5b49e3 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -5106,6 +5106,8 @@
/* enable aspm */
evergreen_program_aspm(rdev);
+ evergreen_mc_program(rdev);
+
if (ASIC_IS_DCE5(rdev)) {
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw || !rdev->mc_fw) {
r = ni_init_microcode(rdev);
@@ -5133,7 +5135,6 @@
if (r)
return r;
- evergreen_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
evergreen_agp_enable(rdev);
} else {
@@ -5291,10 +5292,10 @@
int evergreen_suspend(struct radeon_device *rdev)
{
r600_audio_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_suspend(rdev);
r700_cp_stop(rdev);
r600_dma_stop(rdev);
- r600_uvd_rbc_stop(rdev);
evergreen_irq_suspend(rdev);
radeon_wb_disable(rdev);
evergreen_pcie_gart_disable(rdev);
@@ -5429,6 +5430,7 @@
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
evergreen_pcie_gart_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_fini(rdev);
r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/evergreen_hdmi.c b/drivers/gpu/drm/radeon/evergreen_hdmi.c
index bb9ea36..b0e2800 100644
--- a/drivers/gpu/drm/radeon/evergreen_hdmi.c
+++ b/drivers/gpu/drm/radeon/evergreen_hdmi.c
@@ -148,18 +148,40 @@
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
u32 base_rate = 24000;
+ u32 max_ratio = clock / base_rate;
+ u32 dto_phase;
+ u32 dto_modulo = clock;
+ u32 wallclock_ratio;
+ u32 dto_cntl;
if (!dig || !dig->afmt)
return;
+ if (max_ratio >= 8) {
+ dto_phase = 192 * 1000;
+ wallclock_ratio = 3;
+ } else if (max_ratio >= 4) {
+ dto_phase = 96 * 1000;
+ wallclock_ratio = 2;
+ } else if (max_ratio >= 2) {
+ dto_phase = 48 * 1000;
+ wallclock_ratio = 1;
+ } else {
+ dto_phase = 24 * 1000;
+ wallclock_ratio = 0;
+ }
+ dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+ dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+ WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
+
/* XXX two dtos; generally use dto0 for hdmi */
/* Express [24MHz / target pixel clock] as an exact rational
* number (coefficient of two integer numbers. DCCG_AUDIO_DTOx_PHASE
* is the numerator, DCCG_AUDIO_DTOx_MODULE is the denominator
*/
WREG32(DCCG_AUDIO_DTO_SOURCE, DCCG_AUDIO_DTO0_SOURCE_SEL(radeon_crtc->crtc_id));
- WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
- WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
}
diff --git a/drivers/gpu/drm/radeon/evergreend.h b/drivers/gpu/drm/radeon/evergreend.h
index a7baf67..0d582ac 100644
--- a/drivers/gpu/drm/radeon/evergreend.h
+++ b/drivers/gpu/drm/radeon/evergreend.h
@@ -497,6 +497,9 @@
#define DCCG_AUDIO_DTO0_MODULE 0x05b4
#define DCCG_AUDIO_DTO0_LOAD 0x05b8
#define DCCG_AUDIO_DTO0_CNTL 0x05bc
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0)
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0
#define DCCG_AUDIO_DTO1_PHASE 0x05c0
#define DCCG_AUDIO_DTO1_MODULE 0x05c4
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index 56bd4f3..ccb4f8b5 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -794,9 +794,13 @@
if ((rdev->family >= CHIP_BARTS) && (rdev->family <= CHIP_CAYMAN)) {
snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name);
err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev);
- if (err)
- goto out;
- if (rdev->smc_fw->size != smc_req_size) {
+ if (err) {
+ printk(KERN_ERR
+ "smc: error loading firmware \"%s\"\n",
+ fw_name);
+ release_firmware(rdev->smc_fw);
+ rdev->smc_fw = NULL;
+ } else if (rdev->smc_fw->size != smc_req_size) {
printk(KERN_ERR
"ni_mc: Bogus length %zu in firmware \"%s\"\n",
rdev->mc_fw->size, fw_name);
@@ -2079,6 +2083,8 @@
/* enable aspm */
evergreen_program_aspm(rdev);
+ evergreen_mc_program(rdev);
+
if (rdev->flags & RADEON_IS_IGP) {
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
r = ni_init_microcode(rdev);
@@ -2107,7 +2113,6 @@
if (r)
return r;
- evergreen_mc_program(rdev);
r = cayman_pcie_gart_enable(rdev);
if (r)
return r;
@@ -2286,7 +2291,7 @@
radeon_vm_manager_fini(rdev);
cayman_cp_enable(rdev, false);
cayman_dma_stop(rdev);
- r600_uvd_rbc_stop(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_suspend(rdev);
evergreen_irq_suspend(rdev);
radeon_wb_disable(rdev);
@@ -2418,6 +2423,7 @@
radeon_vm_manager_fini(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_fini(rdev);
cayman_pcie_gart_fini(rdev);
r600_vram_scratch_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/ni_dpm.c b/drivers/gpu/drm/radeon/ni_dpm.c
index 4f9b9bc..f0f5f74 100644
--- a/drivers/gpu/drm/radeon/ni_dpm.c
+++ b/drivers/gpu/drm/radeon/ni_dpm.c
@@ -4067,9 +4067,6 @@
struct rv7xx_power_info *pi;
struct evergreen_power_info *eg_pi;
struct ni_power_info *ni_pi;
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- u16 data_offset, size;
- u8 frev, crev;
struct atom_clock_dividers dividers;
int ret;
@@ -4162,16 +4159,7 @@
eg_pi->vddci_control =
radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDCI, 0);
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
- pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- pi->dynamic_ss = true;
- }
+ rv770_get_engine_memory_ss(rdev);
pi->asi = RV770_ASI_DFLT;
pi->pasi = CYPRESS_HASI_DFLT;
@@ -4188,8 +4176,7 @@
pi->dynamic_pcie_gen2 = true;
- if (pi->gfx_clock_gating &&
- (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE))
+ if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)
pi->thermal_protection = true;
else
pi->thermal_protection = false;
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index 10f712e..e66e720 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2299,9 +2299,13 @@
if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_HEMLOCK)) {
snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", smc_chip_name);
err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev);
- if (err)
- goto out;
- if (rdev->smc_fw->size != smc_req_size) {
+ if (err) {
+ printk(KERN_ERR
+ "smc: error loading firmware \"%s\"\n",
+ fw_name);
+ release_firmware(rdev->smc_fw);
+ rdev->smc_fw = NULL;
+ } else if (rdev->smc_fw->size != smc_req_size) {
printk(KERN_ERR
"smc: Bogus length %zu in firmware \"%s\"\n",
rdev->smc_fw->size, fw_name);
@@ -2697,12 +2701,29 @@
return 0;
}
-void r600_uvd_rbc_stop(struct radeon_device *rdev)
+void r600_uvd_stop(struct radeon_device *rdev)
{
struct radeon_ring *ring = &rdev->ring[R600_RING_TYPE_UVD_INDEX];
/* force RBC into idle state */
WREG32(UVD_RBC_RB_CNTL, 0x11010101);
+
+ /* Stall UMC and register bus before resetting VCPU */
+ WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
+ WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
+ mdelay(1);
+
+ /* put VCPU into reset */
+ WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
+ mdelay(5);
+
+ /* disable VCPU clock */
+ WREG32(UVD_VCPU_CNTL, 0x0);
+
+ /* Unstall UMC and register bus */
+ WREG32_P(UVD_LMI_CTRL2, 0, ~(1 << 8));
+ WREG32_P(UVD_RB_ARB_CTRL, 0, ~(1 << 3));
+
ring->ready = false;
}
@@ -2722,6 +2743,11 @@
/* disable interupt */
WREG32_P(UVD_MASTINT_EN, 0, ~(1 << 1));
+ /* Stall UMC and register bus before resetting VCPU */
+ WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
+ WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
+ mdelay(1);
+
/* put LMI, VCPU, RBC etc... into reset */
WREG32(UVD_SOFT_RESET, LMI_SOFT_RESET | VCPU_SOFT_RESET |
LBSI_SOFT_RESET | RBC_SOFT_RESET | CSM_SOFT_RESET |
@@ -2751,10 +2777,6 @@
WREG32(UVD_MPC_SET_ALU, 0);
WREG32(UVD_MPC_SET_MUX, 0x88);
- /* Stall UMC */
- WREG32_P(UVD_LMI_CTRL2, 1 << 8, ~(1 << 8));
- WREG32_P(UVD_RB_ARB_CTRL, 1 << 3, ~(1 << 3));
-
/* take all subblocks out of reset, except VCPU */
WREG32(UVD_SOFT_RESET, VCPU_SOFT_RESET);
mdelay(5);
@@ -3312,6 +3334,8 @@
/* enable pcie gen2 link */
r600_pcie_gen2_enable(rdev);
+ r600_mc_program(rdev);
+
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
r = r600_init_microcode(rdev);
if (r) {
@@ -3324,7 +3348,6 @@
if (r)
return r;
- r600_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
r600_agp_enable(rdev);
} else {
diff --git a/drivers/gpu/drm/radeon/r600_hdmi.c b/drivers/gpu/drm/radeon/r600_hdmi.c
index f48240b..f264df5 100644
--- a/drivers/gpu/drm/radeon/r600_hdmi.c
+++ b/drivers/gpu/drm/radeon/r600_hdmi.c
@@ -226,10 +226,29 @@
struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
u32 base_rate = 24000;
+ u32 max_ratio = clock / base_rate;
+ u32 dto_phase;
+ u32 dto_modulo = clock;
+ u32 wallclock_ratio;
+ u32 dto_cntl;
if (!dig || !dig->afmt)
return;
+ if (max_ratio >= 8) {
+ dto_phase = 192 * 1000;
+ wallclock_ratio = 3;
+ } else if (max_ratio >= 4) {
+ dto_phase = 96 * 1000;
+ wallclock_ratio = 2;
+ } else if (max_ratio >= 2) {
+ dto_phase = 48 * 1000;
+ wallclock_ratio = 1;
+ } else {
+ dto_phase = 24 * 1000;
+ wallclock_ratio = 0;
+ }
+
/* there are two DTOs selected by DCCG_AUDIO_DTO_SELECT.
* doesn't matter which one you use. Just use the first one.
*/
@@ -242,9 +261,21 @@
/* according to the reg specs, this should DCE3.2 only, but in
* practice it seems to cover DCE3.0 as well.
*/
- WREG32(DCCG_AUDIO_DTO0_PHASE, base_rate * 100);
- WREG32(DCCG_AUDIO_DTO0_MODULE, clock * 100);
- WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+ if (dig->dig_encoder == 0) {
+ dto_cntl = RREG32(DCCG_AUDIO_DTO0_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+ dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+ WREG32(DCCG_AUDIO_DTO0_CNTL, dto_cntl);
+ WREG32(DCCG_AUDIO_DTO0_PHASE, dto_phase);
+ WREG32(DCCG_AUDIO_DTO0_MODULE, dto_modulo);
+ WREG32(DCCG_AUDIO_DTO_SELECT, 0); /* select DTO0 */
+ } else {
+ dto_cntl = RREG32(DCCG_AUDIO_DTO1_CNTL) & ~DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK;
+ dto_cntl |= DCCG_AUDIO_DTO_WALLCLOCK_RATIO(wallclock_ratio);
+ WREG32(DCCG_AUDIO_DTO1_CNTL, dto_cntl);
+ WREG32(DCCG_AUDIO_DTO1_PHASE, dto_phase);
+ WREG32(DCCG_AUDIO_DTO1_MODULE, dto_modulo);
+ WREG32(DCCG_AUDIO_DTO_SELECT, 1); /* select DTO1 */
+ }
} else {
/* according to the reg specs, this should be DCE2.0 and DCE3.0 */
WREG32(AUDIO_DTO, AUDIO_DTO_PHASE(base_rate / 10) |
diff --git a/drivers/gpu/drm/radeon/r600d.h b/drivers/gpu/drm/radeon/r600d.h
index 8e3fe81..7c78083 100644
--- a/drivers/gpu/drm/radeon/r600d.h
+++ b/drivers/gpu/drm/radeon/r600d.h
@@ -933,6 +933,9 @@
#define DCCG_AUDIO_DTO0_LOAD 0x051c
# define DTO_LOAD (1 << 31)
#define DCCG_AUDIO_DTO0_CNTL 0x0520
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO(x) (((x) & 7) << 0)
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_MASK 7
+# define DCCG_AUDIO_DTO_WALLCLOCK_RATIO_SHIFT 0
#define DCCG_AUDIO_DTO1_PHASE 0x0524
#define DCCG_AUDIO_DTO1_MODULE 0x0528
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 2f08219..274b8e1 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -1468,7 +1468,6 @@
void *cpu_addr;
uint64_t gpu_addr;
void *saved_bo;
- unsigned fw_size;
atomic_t handles[RADEON_MAX_UVD_HANDLES];
struct drm_file *filp[RADEON_MAX_UVD_HANDLES];
struct delayed_work idle_work;
@@ -2066,6 +2065,7 @@
const struct firmware *mec_fw; /* CIK MEC firmware */
const struct firmware *sdma_fw; /* CIK SDMA firmware */
const struct firmware *smc_fw; /* SMC firmware */
+ const struct firmware *uvd_fw; /* UVD firmware */
struct r600_blit r600_blit;
struct r600_vram_scratch vram_scratch;
int msi_enabled; /* msi enabled */
@@ -2095,6 +2095,8 @@
/* ACPI interface */
struct radeon_atif atif;
struct radeon_atcs atcs;
+ /* srbm instance registers */
+ struct mutex srbm_mutex;
};
int radeon_device_init(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 902479f..3d61d5a 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -441,7 +441,7 @@
/* uvd */
int r600_uvd_init(struct radeon_device *rdev);
int r600_uvd_rbc_start(struct radeon_device *rdev);
-void r600_uvd_rbc_stop(struct radeon_device *rdev);
+void r600_uvd_stop(struct radeon_device *rdev);
int r600_uvd_ib_test(struct radeon_device *rdev, struct radeon_ring *ring);
void r600_uvd_fence_emit(struct radeon_device *rdev,
struct radeon_fence *fence);
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index 82335e3..63398ae 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -1163,6 +1163,7 @@
mutex_init(&rdev->gem.mutex);
mutex_init(&rdev->pm.mutex);
mutex_init(&rdev->gpu_clock_mutex);
+ mutex_init(&rdev->srbm_mutex);
init_rwsem(&rdev->pm.mclk_lock);
init_rwsem(&rdev->exclusive_lock);
init_waitqueue_head(&rdev->irq.vblank_queue);
@@ -1519,6 +1520,7 @@
radeon_save_bios_scratch_regs(rdev);
/* block TTM */
resched = ttm_bo_lock_delayed_workqueue(&rdev->mman.bdev);
+ radeon_pm_suspend(rdev);
radeon_suspend(rdev);
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
@@ -1564,6 +1566,7 @@
}
}
+ radeon_pm_resume(rdev);
drm_helper_resume_force_mode(rdev->ddev);
ttm_bo_unlock_delayed_workqueue(&rdev->mman.bdev, resched);
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 7ddb0ef..ddb8f8e 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -782,7 +782,7 @@
} else {
/* put fence directly behind firmware */
- index = ALIGN(rdev->uvd.fw_size, 8);
+ index = ALIGN(rdev->uvd_fw->size, 8);
rdev->fence_drv[ring].cpu_addr = rdev->uvd.cpu_addr + index;
rdev->fence_drv[ring].gpu_addr = rdev->uvd.gpu_addr + index;
}
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index 6a51d94..b990b1a 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -207,7 +207,6 @@
if (rdev->gart.robj == NULL) {
return;
}
- radeon_gart_table_vram_unpin(rdev);
radeon_bo_unref(&rdev->gart.robj);
}
diff --git a/drivers/gpu/drm/radeon/radeon_pm.c b/drivers/gpu/drm/radeon/radeon_pm.c
index f374c46..c557850 100644
--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1176,7 +1176,14 @@
case CHIP_VERDE:
case CHIP_OLAND:
case CHIP_HAINAN:
- if (radeon_dpm == 1)
+ /* DPM requires the RLC, RV770+ dGPU requires SMC */
+ if (!rdev->rlc_fw)
+ rdev->pm.pm_method = PM_METHOD_PROFILE;
+ else if ((rdev->family >= CHIP_RV770) &&
+ (!(rdev->flags & RADEON_IS_IGP)) &&
+ (!rdev->smc_fw))
+ rdev->pm.pm_method = PM_METHOD_PROFILE;
+ else if (radeon_dpm == 1)
rdev->pm.pm_method = PM_METHOD_DPM;
else
rdev->pm.pm_method = PM_METHOD_PROFILE;
diff --git a/drivers/gpu/drm/radeon/radeon_uvd.c b/drivers/gpu/drm/radeon/radeon_uvd.c
index 414fd14..f1c1575 100644
--- a/drivers/gpu/drm/radeon/radeon_uvd.c
+++ b/drivers/gpu/drm/radeon/radeon_uvd.c
@@ -56,7 +56,6 @@
int radeon_uvd_init(struct radeon_device *rdev)
{
- const struct firmware *fw;
unsigned long bo_size;
const char *fw_name;
int i, r;
@@ -105,14 +104,14 @@
return -EINVAL;
}
- r = request_firmware(&fw, fw_name, rdev->dev);
+ r = request_firmware(&rdev->uvd_fw, fw_name, rdev->dev);
if (r) {
dev_err(rdev->dev, "radeon_uvd: Can't load firmware \"%s\"\n",
fw_name);
return r;
}
- bo_size = RADEON_GPU_PAGE_ALIGN(fw->size + 8) +
+ bo_size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 8) +
RADEON_UVD_STACK_SIZE + RADEON_UVD_HEAP_SIZE;
r = radeon_bo_create(rdev, bo_size, PAGE_SIZE, true,
RADEON_GEM_DOMAIN_VRAM, NULL, &rdev->uvd.vcpu_bo);
@@ -145,12 +144,6 @@
radeon_bo_unreserve(rdev->uvd.vcpu_bo);
- rdev->uvd.fw_size = fw->size;
- memset(rdev->uvd.cpu_addr, 0, bo_size);
- memcpy(rdev->uvd.cpu_addr, fw->data, fw->size);
-
- release_firmware(fw);
-
for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
atomic_set(&rdev->uvd.handles[i], 0);
rdev->uvd.filp[i] = NULL;
@@ -174,33 +167,60 @@
}
radeon_bo_unref(&rdev->uvd.vcpu_bo);
+
+ release_firmware(rdev->uvd_fw);
}
int radeon_uvd_suspend(struct radeon_device *rdev)
{
unsigned size;
+ void *ptr;
+ int i;
if (rdev->uvd.vcpu_bo == NULL)
return 0;
+ for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i)
+ if (atomic_read(&rdev->uvd.handles[i]))
+ break;
+
+ if (i == RADEON_MAX_UVD_HANDLES)
+ return 0;
+
size = radeon_bo_size(rdev->uvd.vcpu_bo);
+ size -= rdev->uvd_fw->size;
+
+ ptr = rdev->uvd.cpu_addr;
+ ptr += rdev->uvd_fw->size;
+
rdev->uvd.saved_bo = kmalloc(size, GFP_KERNEL);
- memcpy(rdev->uvd.saved_bo, rdev->uvd.cpu_addr, size);
+ memcpy(rdev->uvd.saved_bo, ptr, size);
return 0;
}
int radeon_uvd_resume(struct radeon_device *rdev)
{
+ unsigned size;
+ void *ptr;
+
if (rdev->uvd.vcpu_bo == NULL)
return -EINVAL;
+ memcpy(rdev->uvd.cpu_addr, rdev->uvd_fw->data, rdev->uvd_fw->size);
+
+ size = radeon_bo_size(rdev->uvd.vcpu_bo);
+ size -= rdev->uvd_fw->size;
+
+ ptr = rdev->uvd.cpu_addr;
+ ptr += rdev->uvd_fw->size;
+
if (rdev->uvd.saved_bo != NULL) {
- unsigned size = radeon_bo_size(rdev->uvd.vcpu_bo);
- memcpy(rdev->uvd.cpu_addr, rdev->uvd.saved_bo, size);
+ memcpy(ptr, rdev->uvd.saved_bo, size);
kfree(rdev->uvd.saved_bo);
rdev->uvd.saved_bo = NULL;
- }
+ } else
+ memset(ptr, 0, size);
return 0;
}
@@ -215,8 +235,8 @@
{
int i, r;
for (i = 0; i < RADEON_MAX_UVD_HANDLES; ++i) {
- if (rdev->uvd.filp[i] == filp) {
- uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+ uint32_t handle = atomic_read(&rdev->uvd.handles[i]);
+ if (handle != 0 && rdev->uvd.filp[i] == filp) {
struct radeon_fence *fence;
r = radeon_uvd_get_destroy_msg(rdev,
@@ -337,8 +357,10 @@
}
r = radeon_bo_kmap(bo, &ptr);
- if (r)
+ if (r) {
+ DRM_ERROR("Failed mapping the UVD message (%d)!\n", r);
return r;
+ }
msg = ptr + offset;
@@ -364,8 +386,14 @@
radeon_bo_kunmap(bo);
return 0;
} else {
- /* it's a create msg, no special handling needed */
radeon_bo_kunmap(bo);
+
+ if (msg_type != 0) {
+ DRM_ERROR("Illegal UVD message type (%d)!\n", msg_type);
+ return -EINVAL;
+ }
+
+ /* it's a create msg, no special handling needed */
}
/* create or decode, validate the handle */
@@ -388,7 +416,7 @@
static int radeon_uvd_cs_reloc(struct radeon_cs_parser *p,
int data0, int data1,
- unsigned buf_sizes[])
+ unsigned buf_sizes[], bool *has_msg_cmd)
{
struct radeon_cs_chunk *relocs_chunk;
struct radeon_cs_reloc *reloc;
@@ -417,7 +445,7 @@
if (cmd < 0x4) {
if ((end - start) < buf_sizes[cmd]) {
- DRM_ERROR("buffer to small (%d / %d)!\n",
+ DRM_ERROR("buffer (%d) to small (%d / %d)!\n", cmd,
(unsigned)(end - start), buf_sizes[cmd]);
return -EINVAL;
}
@@ -442,9 +470,17 @@
}
if (cmd == 0) {
+ if (*has_msg_cmd) {
+ DRM_ERROR("More than one message in a UVD-IB!\n");
+ return -EINVAL;
+ }
+ *has_msg_cmd = true;
r = radeon_uvd_cs_msg(p, reloc->robj, offset, buf_sizes);
if (r)
return r;
+ } else if (!*has_msg_cmd) {
+ DRM_ERROR("Message needed before other commands are send!\n");
+ return -EINVAL;
}
return 0;
@@ -453,7 +489,8 @@
static int radeon_uvd_cs_reg(struct radeon_cs_parser *p,
struct radeon_cs_packet *pkt,
int *data0, int *data1,
- unsigned buf_sizes[])
+ unsigned buf_sizes[],
+ bool *has_msg_cmd)
{
int i, r;
@@ -467,7 +504,8 @@
*data1 = p->idx;
break;
case UVD_GPCOM_VCPU_CMD:
- r = radeon_uvd_cs_reloc(p, *data0, *data1, buf_sizes);
+ r = radeon_uvd_cs_reloc(p, *data0, *data1,
+ buf_sizes, has_msg_cmd);
if (r)
return r;
break;
@@ -488,6 +526,9 @@
struct radeon_cs_packet pkt;
int r, data0 = 0, data1 = 0;
+ /* does the IB has a msg command */
+ bool has_msg_cmd = false;
+
/* minimum buffer sizes */
unsigned buf_sizes[] = {
[0x00000000] = 2048,
@@ -514,8 +555,8 @@
return r;
switch (pkt.type) {
case RADEON_PACKET_TYPE0:
- r = radeon_uvd_cs_reg(p, &pkt, &data0,
- &data1, buf_sizes);
+ r = radeon_uvd_cs_reg(p, &pkt, &data0, &data1,
+ buf_sizes, &has_msg_cmd);
if (r)
return r;
break;
@@ -527,6 +568,12 @@
return -EINVAL;
}
} while (p->idx < p->chunks[p->chunk_ib_idx].length_dw);
+
+ if (!has_msg_cmd) {
+ DRM_ERROR("UVD-IBs need a msg command!\n");
+ return -EINVAL;
+ }
+
return 0;
}
diff --git a/drivers/gpu/drm/radeon/rv6xx_dpm.c b/drivers/gpu/drm/radeon/rv6xx_dpm.c
index 363018c..bdd888b 100644
--- a/drivers/gpu/drm/radeon/rv6xx_dpm.c
+++ b/drivers/gpu/drm/radeon/rv6xx_dpm.c
@@ -1944,9 +1944,7 @@
int rv6xx_dpm_init(struct radeon_device *rdev)
{
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- uint16_t data_offset, size;
- uint8_t frev, crev;
+ struct radeon_atom_ss ss;
struct atom_clock_dividers dividers;
struct rv6xx_power_info *pi;
int ret;
@@ -1989,16 +1987,18 @@
pi->gfx_clock_gating = true;
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
+ pi->sclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
+ ASIC_INTERNAL_ENGINE_SS, 0);
+ pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
+ ASIC_INTERNAL_MEMORY_SS, 0);
+
+ /* Disable sclk ss, causes hangs on a lot of systems */
+ pi->sclk_ss = false;
+
+ if (pi->sclk_ss || pi->mclk_ss)
pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
+ else
pi->dynamic_ss = false;
- }
pi->dynamic_pcie_gen2 = true;
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 30ea14e..bcc68ec 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -813,7 +813,7 @@
/* programm the VCPU memory controller bits 0-27 */
addr = rdev->uvd.gpu_addr >> 3;
- size = RADEON_GPU_PAGE_ALIGN(rdev->uvd.fw_size + 4) >> 3;
+ size = RADEON_GPU_PAGE_ALIGN(rdev->uvd_fw->size + 4) >> 3;
WREG32(UVD_VCPU_CACHE_OFFSET0, addr);
WREG32(UVD_VCPU_CACHE_SIZE0, size);
@@ -1829,6 +1829,8 @@
/* enable pcie gen2 link */
rv770_pcie_gen2_enable(rdev);
+ rv770_mc_program(rdev);
+
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->rlc_fw) {
r = r600_init_microcode(rdev);
if (r) {
@@ -1841,7 +1843,6 @@
if (r)
return r;
- rv770_mc_program(rdev);
if (rdev->flags & RADEON_IS_AGP) {
rv770_agp_enable(rdev);
} else {
@@ -1983,6 +1984,7 @@
int rv770_suspend(struct radeon_device *rdev)
{
r600_audio_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_suspend(rdev);
r700_cp_stop(rdev);
r600_dma_stop(rdev);
@@ -2098,6 +2100,7 @@
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
rv770_pcie_gart_fini(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_fini(rdev);
r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.c b/drivers/gpu/drm/radeon/rv770_dpm.c
index 2d34792..094c67a 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.c
+++ b/drivers/gpu/drm/radeon/rv770_dpm.c
@@ -2319,12 +2319,25 @@
return 0;
}
+void rv770_get_engine_memory_ss(struct radeon_device *rdev)
+{
+ struct rv7xx_power_info *pi = rv770_get_pi(rdev);
+ struct radeon_atom_ss ss;
+
+ pi->sclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
+ ASIC_INTERNAL_ENGINE_SS, 0);
+ pi->mclk_ss = radeon_atombios_get_asic_ss_info(rdev, &ss,
+ ASIC_INTERNAL_MEMORY_SS, 0);
+
+ if (pi->sclk_ss || pi->mclk_ss)
+ pi->dynamic_ss = true;
+ else
+ pi->dynamic_ss = false;
+}
+
int rv770_dpm_init(struct radeon_device *rdev)
{
struct rv7xx_power_info *pi;
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- uint16_t data_offset, size;
- uint8_t frev, crev;
struct atom_clock_dividers dividers;
int ret;
@@ -2369,16 +2382,7 @@
pi->mvdd_control =
radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_MVDDC, 0);
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
- pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- pi->dynamic_ss = false;
- }
+ rv770_get_engine_memory_ss(rdev);
pi->asi = RV770_ASI_DFLT;
pi->pasi = RV770_HASI_DFLT;
@@ -2393,8 +2397,7 @@
pi->dynamic_pcie_gen2 = true;
- if (pi->gfx_clock_gating &&
- (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE))
+ if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)
pi->thermal_protection = true;
else
pi->thermal_protection = false;
diff --git a/drivers/gpu/drm/radeon/rv770_dpm.h b/drivers/gpu/drm/radeon/rv770_dpm.h
index 96b1b2a..9244eff 100644
--- a/drivers/gpu/drm/radeon/rv770_dpm.h
+++ b/drivers/gpu/drm/radeon/rv770_dpm.h
@@ -275,6 +275,7 @@
void rv770_set_uvd_clock_after_set_eng_clock(struct radeon_device *rdev,
struct radeon_ps *new_ps,
struct radeon_ps *old_ps);
+void rv770_get_engine_memory_ss(struct radeon_device *rdev);
/* smc */
int rv770_read_smc_soft_register(struct radeon_device *rdev,
diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c
index 6ca9046..daa8d2d 100644
--- a/drivers/gpu/drm/radeon/si.c
+++ b/drivers/gpu/drm/radeon/si.c
@@ -1663,9 +1663,13 @@
snprintf(fw_name, sizeof(fw_name), "radeon/%s_smc.bin", chip_name);
err = request_firmware(&rdev->smc_fw, fw_name, rdev->dev);
- if (err)
- goto out;
- if (rdev->smc_fw->size != smc_req_size) {
+ if (err) {
+ printk(KERN_ERR
+ "smc: error loading firmware \"%s\"\n",
+ fw_name);
+ release_firmware(rdev->smc_fw);
+ rdev->smc_fw = NULL;
+ } else if (rdev->smc_fw->size != smc_req_size) {
printk(KERN_ERR
"si_smc: Bogus length %zu in firmware \"%s\"\n",
rdev->smc_fw->size, fw_name);
@@ -6418,6 +6422,8 @@
/* enable aspm */
si_program_aspm(rdev);
+ si_mc_program(rdev);
+
if (!rdev->me_fw || !rdev->pfp_fw || !rdev->ce_fw ||
!rdev->rlc_fw || !rdev->mc_fw) {
r = si_init_microcode(rdev);
@@ -6437,7 +6443,6 @@
if (r)
return r;
- si_mc_program(rdev);
r = si_pcie_gart_enable(rdev);
if (r)
return r;
@@ -6621,7 +6626,7 @@
si_cp_enable(rdev, false);
cayman_dma_stop(rdev);
if (rdev->has_uvd) {
- r600_uvd_rbc_stop(rdev);
+ r600_uvd_stop(rdev);
radeon_uvd_suspend(rdev);
}
si_irq_suspend(rdev);
@@ -6763,8 +6768,10 @@
radeon_vm_manager_fini(rdev);
radeon_ib_pool_fini(rdev);
radeon_irq_kms_fini(rdev);
- if (rdev->has_uvd)
+ if (rdev->has_uvd) {
+ r600_uvd_stop(rdev);
radeon_uvd_fini(rdev);
+ }
si_pcie_gart_fini(rdev);
r600_vram_scratch_fini(rdev);
radeon_gem_fini(rdev);
diff --git a/drivers/gpu/drm/radeon/si_dpm.c b/drivers/gpu/drm/radeon/si_dpm.c
index 4182557..88699e3 100644
--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2903,7 +2903,8 @@
{
struct ni_ps *ps = ni_get_ps(rps);
struct radeon_clock_and_voltage_limits *max_limits;
- bool disable_mclk_switching;
+ bool disable_mclk_switching = false;
+ bool disable_sclk_switching = false;
u32 mclk, sclk;
u16 vddc, vddci;
int i;
@@ -2911,8 +2912,11 @@
if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
ni_dpm_vblank_too_short(rdev))
disable_mclk_switching = true;
- else
- disable_mclk_switching = false;
+
+ if (rps->vclk || rps->dclk) {
+ disable_mclk_switching = true;
+ disable_sclk_switching = true;
+ }
if (rdev->pm.dpm.ac_power)
max_limits = &rdev->pm.dpm.dyn_state.max_clock_voltage_on_ac;
@@ -2940,27 +2944,43 @@
if (disable_mclk_switching) {
mclk = ps->performance_levels[ps->performance_level_count - 1].mclk;
- sclk = ps->performance_levels[0].sclk;
- vddc = ps->performance_levels[0].vddc;
vddci = ps->performance_levels[ps->performance_level_count - 1].vddci;
} else {
- sclk = ps->performance_levels[0].sclk;
mclk = ps->performance_levels[0].mclk;
- vddc = ps->performance_levels[0].vddc;
vddci = ps->performance_levels[0].vddci;
}
+ if (disable_sclk_switching) {
+ sclk = ps->performance_levels[ps->performance_level_count - 1].sclk;
+ vddc = ps->performance_levels[ps->performance_level_count - 1].vddc;
+ } else {
+ sclk = ps->performance_levels[0].sclk;
+ vddc = ps->performance_levels[0].vddc;
+ }
+
/* adjusted low state */
ps->performance_levels[0].sclk = sclk;
ps->performance_levels[0].mclk = mclk;
ps->performance_levels[0].vddc = vddc;
ps->performance_levels[0].vddci = vddci;
- for (i = 1; i < ps->performance_level_count; i++) {
- if (ps->performance_levels[i].sclk < ps->performance_levels[i - 1].sclk)
- ps->performance_levels[i].sclk = ps->performance_levels[i - 1].sclk;
- if (ps->performance_levels[i].vddc < ps->performance_levels[i - 1].vddc)
- ps->performance_levels[i].vddc = ps->performance_levels[i - 1].vddc;
+ if (disable_sclk_switching) {
+ sclk = ps->performance_levels[0].sclk;
+ for (i = 1; i < ps->performance_level_count; i++) {
+ if (sclk < ps->performance_levels[i].sclk)
+ sclk = ps->performance_levels[i].sclk;
+ }
+ for (i = 0; i < ps->performance_level_count; i++) {
+ ps->performance_levels[i].sclk = sclk;
+ ps->performance_levels[i].vddc = vddc;
+ }
+ } else {
+ for (i = 1; i < ps->performance_level_count; i++) {
+ if (ps->performance_levels[i].sclk < ps->performance_levels[i - 1].sclk)
+ ps->performance_levels[i].sclk = ps->performance_levels[i - 1].sclk;
+ if (ps->performance_levels[i].vddc < ps->performance_levels[i - 1].vddc)
+ ps->performance_levels[i].vddc = ps->performance_levels[i - 1].vddc;
+ }
}
if (disable_mclk_switching) {
@@ -6253,9 +6273,6 @@
struct evergreen_power_info *eg_pi;
struct ni_power_info *ni_pi;
struct si_power_info *si_pi;
- int index = GetIndexIntoMasterTable(DATA, ASIC_InternalSS_Info);
- u16 data_offset, size;
- u8 frev, crev;
struct atom_clock_dividers dividers;
int ret;
u32 mask;
@@ -6346,16 +6363,7 @@
si_pi->vddc_phase_shed_control =
radeon_atom_is_voltage_gpio(rdev, SET_VOLTAGE_TYPE_ASIC_VDDC, VOLTAGE_OBJ_PHASE_LUT);
- if (atom_parse_data_header(rdev->mode_info.atom_context, index, &size,
- &frev, &crev, &data_offset)) {
- pi->sclk_ss = true;
- pi->mclk_ss = true;
- pi->dynamic_ss = true;
- } else {
- pi->sclk_ss = false;
- pi->mclk_ss = false;
- pi->dynamic_ss = true;
- }
+ rv770_get_engine_memory_ss(rdev);
pi->asi = RV770_ASI_DFLT;
pi->pasi = CYPRESS_HASI_DFLT;
@@ -6366,8 +6374,7 @@
eg_pi->sclk_deep_sleep = true;
si_pi->sclk_deep_sleep_above_low = false;
- if (pi->gfx_clock_gating &&
- (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE))
+ if (rdev->pm.int_thermal_type != THERMAL_TYPE_NONE)
pi->thermal_protection = true;
else
pi->thermal_protection = false;
diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
index 7a57648..cd33084 100644
--- a/drivers/hid/hid-logitech-dj.c
+++ b/drivers/hid/hid-logitech-dj.c
@@ -488,8 +488,6 @@
if (djrcv_dev->querying_devices)
return 0;
- djrcv_dev->querying_devices = true;
-
dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL);
if (!dj_report)
return -ENOMEM;
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index 0f34bca..6099f50 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -215,7 +215,7 @@
u16 value)
{
return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
- && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+ || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
}
static void adt7470_init_client(struct i2c_client *client)
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
index ccec916..af8f65f 100644
--- a/drivers/i2c/busses/i2c-kempld.c
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -246,9 +246,9 @@
bus_frequency = KEMPLD_I2C_FREQ_MAX;
if (pld->info.spec_major == 1)
- prescale = pld->pld_clock / bus_frequency * 5 - 1000;
+ prescale = pld->pld_clock / (bus_frequency * 5) - 1000;
else
- prescale = pld->pld_clock / bus_frequency * 4 - 3000;
+ prescale = pld->pld_clock / (bus_frequency * 4) - 3000;
if (prescale < 0)
prescale = 0;
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index df8ff5a..e2e9a0d 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -493,7 +493,7 @@
* based on this empirical measurement and a lot of previous frobbing.
*/
i2c->cmd_err = 0;
- if (msg->len < 8) {
+ if (0) { /* disable PIO mode until a proper fix is made */
ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
if (ret)
mxs_i2c_reset(i2c);
diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
index 0ad208a..3ceac3e 100644
--- a/drivers/iio/adc/ti_am335x_adc.c
+++ b/drivers/iio/adc/ti_am335x_adc.c
@@ -60,7 +60,6 @@
{
unsigned int stepconfig;
int i, steps;
- u32 step_en;
/*
* There are 16 configurable steps and 8 analog input
@@ -86,8 +85,7 @@
adc_dev->channel_step[i] = steps;
steps++;
}
- step_en = get_adc_step_mask(adc_dev);
- am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
+
}
static const char * const chan_name_ain[] = {
@@ -142,10 +140,22 @@
int *val, int *val2, long mask)
{
struct tiadc_device *adc_dev = iio_priv(indio_dev);
- int i;
- unsigned int fifo1count, read;
+ int i, map_val;
+ unsigned int fifo1count, read, stepid;
u32 step = UINT_MAX;
bool found = false;
+ u32 step_en;
+ unsigned long timeout = jiffies + usecs_to_jiffies
+ (IDLE_TIMEOUT * adc_dev->channels);
+ step_en = get_adc_step_mask(adc_dev);
+ am335x_tsc_se_set(adc_dev->mfd_tscadc, step_en);
+
+ /* Wait for ADC sequencer to complete sampling */
+ while (tiadc_readl(adc_dev, REG_ADCFSM) & SEQ_STATUS) {
+ if (time_after(jiffies, timeout))
+ return -EAGAIN;
+ }
+ map_val = chan->channel + TOTAL_CHANNELS;
/*
* When the sub-system is first enabled,
@@ -170,12 +180,16 @@
fifo1count = tiadc_readl(adc_dev, REG_FIFO1CNT);
for (i = 0; i < fifo1count; i++) {
read = tiadc_readl(adc_dev, REG_FIFO1);
- if (read >> 16 == step) {
- *val = read & 0xfff;
+ stepid = read & FIFOREAD_CHNLID_MASK;
+ stepid = stepid >> 0x10;
+
+ if (stepid == map_val) {
+ read = read & FIFOREAD_DATA_MASK;
found = true;
+ *val = read;
}
}
- am335x_tsc_se_update(adc_dev->mfd_tscadc);
+
if (found == false)
return -EBUSY;
return IIO_VAL_INT;
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index ea8a414..0dd9bb8 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -127,12 +127,17 @@
void iio_trigger_poll(struct iio_trigger *trig, s64 time)
{
int i;
- if (!trig->use_count)
- for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++)
- if (trig->subirqs[i].enabled) {
- trig->use_count++;
+
+ if (!atomic_read(&trig->use_count)) {
+ atomic_set(&trig->use_count, CONFIG_IIO_CONSUMERS_PER_TRIGGER);
+
+ for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) {
+ if (trig->subirqs[i].enabled)
generic_handle_irq(trig->subirq_base + i);
- }
+ else
+ iio_trigger_notify_done(trig);
+ }
+ }
}
EXPORT_SYMBOL(iio_trigger_poll);
@@ -146,19 +151,24 @@
void iio_trigger_poll_chained(struct iio_trigger *trig, s64 time)
{
int i;
- if (!trig->use_count)
- for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++)
- if (trig->subirqs[i].enabled) {
- trig->use_count++;
+
+ if (!atomic_read(&trig->use_count)) {
+ atomic_set(&trig->use_count, CONFIG_IIO_CONSUMERS_PER_TRIGGER);
+
+ for (i = 0; i < CONFIG_IIO_CONSUMERS_PER_TRIGGER; i++) {
+ if (trig->subirqs[i].enabled)
handle_nested_irq(trig->subirq_base + i);
- }
+ else
+ iio_trigger_notify_done(trig);
+ }
+ }
}
EXPORT_SYMBOL(iio_trigger_poll_chained);
void iio_trigger_notify_done(struct iio_trigger *trig)
{
- trig->use_count--;
- if (trig->use_count == 0 && trig->ops && trig->ops->try_reenable)
+ if (atomic_dec_and_test(&trig->use_count) && trig->ops &&
+ trig->ops->try_reenable)
if (trig->ops->try_reenable(trig))
/* Missed an interrupt so launch new poll now */
iio_trigger_poll(trig, 0);
diff --git a/drivers/media/i2c/ml86v7667.c b/drivers/media/i2c/ml86v7667.c
index efdc873..a985702 100644
--- a/drivers/media/i2c/ml86v7667.c
+++ b/drivers/media/i2c/ml86v7667.c
@@ -117,7 +117,7 @@
{
struct v4l2_subdev *sd = to_sd(ctrl);
struct i2c_client *client = v4l2_get_subdevdata(sd);
- int ret;
+ int ret = -EINVAL;
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
@@ -157,7 +157,7 @@
break;
}
- return 0;
+ return ret;
}
static int ml86v7667_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
diff --git a/drivers/media/platform/coda.c b/drivers/media/platform/coda.c
index df4ada88..bd9405d 100644
--- a/drivers/media/platform/coda.c
+++ b/drivers/media/platform/coda.c
@@ -1987,7 +1987,7 @@
#ifdef CONFIG_OF
static const struct of_device_id coda_dt_ids[] = {
- { .compatible = "fsl,imx27-vpu", .data = &coda_platform_ids[CODA_IMX27] },
+ { .compatible = "fsl,imx27-vpu", .data = &coda_devdata[CODA_IMX27] },
{ .compatible = "fsl,imx53-vpu", .data = &coda_devdata[CODA_IMX53] },
{ /* sentinel */ }
};
diff --git a/drivers/media/platform/s5p-g2d/g2d.c b/drivers/media/platform/s5p-g2d/g2d.c
index 553d87e..fd6289d 100644
--- a/drivers/media/platform/s5p-g2d/g2d.c
+++ b/drivers/media/platform/s5p-g2d/g2d.c
@@ -784,6 +784,7 @@
}
*vfd = g2d_videodev;
vfd->lock = &dev->mutex;
+ vfd->v4l2_dev = &dev->v4l2_dev;
ret = video_register_device(vfd, VFL_TYPE_GRABBER, 0);
if (ret) {
v4l2_err(&dev->v4l2_dev, "Failed to register video device\n");
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
index 5296385..4f6dd42 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_dec.c
@@ -344,7 +344,7 @@
pix_mp->num_planes = 2;
/* Set pixelformat to the format in which MFC
outputs the decoded frame */
- pix_mp->pixelformat = V4L2_PIX_FMT_NV12MT;
+ pix_mp->pixelformat = ctx->dst_fmt->fourcc;
pix_mp->plane_fmt[0].bytesperline = ctx->buf_width;
pix_mp->plane_fmt[0].sizeimage = ctx->luma_size;
pix_mp->plane_fmt[1].bytesperline = ctx->buf_width;
@@ -382,10 +382,16 @@
mfc_err("Unsupported format for source.\n");
return -EINVAL;
}
- if (!IS_MFCV6(dev) && (fmt->fourcc == V4L2_PIX_FMT_VP8)) {
- mfc_err("Not supported format.\n");
+ if (fmt->codec_mode == S5P_FIMV_CODEC_NONE) {
+ mfc_err("Unknown codec\n");
return -EINVAL;
}
+ if (!IS_MFCV6(dev)) {
+ if (fmt->fourcc == V4L2_PIX_FMT_VP8) {
+ mfc_err("Not supported format.\n");
+ return -EINVAL;
+ }
+ }
} else if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
fmt = find_format(f, MFC_FMT_RAW);
if (!fmt) {
@@ -411,7 +417,6 @@
struct s5p_mfc_dev *dev = video_drvdata(file);
struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
int ret = 0;
- struct s5p_mfc_fmt *fmt;
struct v4l2_pix_format_mplane *pix_mp;
mfc_debug_enter();
@@ -425,54 +430,32 @@
goto out;
}
if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
- fmt = find_format(f, MFC_FMT_RAW);
- if (!fmt) {
- mfc_err("Unsupported format for source.\n");
- return -EINVAL;
- }
- if (!IS_MFCV6(dev) && (fmt->fourcc != V4L2_PIX_FMT_NV12MT)) {
- mfc_err("Not supported format.\n");
- return -EINVAL;
- } else if (IS_MFCV6(dev) &&
- (fmt->fourcc == V4L2_PIX_FMT_NV12MT)) {
- mfc_err("Not supported format.\n");
- return -EINVAL;
- }
- ctx->dst_fmt = fmt;
- mfc_debug_leave();
- return ret;
- } else if (f->type != V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- mfc_err("Wrong type error for S_FMT : %d", f->type);
- return -EINVAL;
- }
- fmt = find_format(f, MFC_FMT_DEC);
- if (!fmt || fmt->codec_mode == S5P_MFC_CODEC_NONE) {
- mfc_err("Unknown codec\n");
- ret = -EINVAL;
+ /* dst_fmt is validated by call to vidioc_try_fmt */
+ ctx->dst_fmt = find_format(f, MFC_FMT_RAW);
+ ret = 0;
goto out;
- }
- if (fmt->type != MFC_FMT_DEC) {
- mfc_err("Wrong format selected, you should choose "
- "format for decoding\n");
- ret = -EINVAL;
- goto out;
- }
- if (!IS_MFCV6(dev) && (fmt->fourcc == V4L2_PIX_FMT_VP8)) {
- mfc_err("Not supported format.\n");
- return -EINVAL;
- }
- ctx->src_fmt = fmt;
- ctx->codec_mode = fmt->codec_mode;
- mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode);
- pix_mp->height = 0;
- pix_mp->width = 0;
- if (pix_mp->plane_fmt[0].sizeimage)
- ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage;
- else
- pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size =
+ } else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
+ /* src_fmt is validated by call to vidioc_try_fmt */
+ ctx->src_fmt = find_format(f, MFC_FMT_DEC);
+ ctx->codec_mode = ctx->src_fmt->codec_mode;
+ mfc_debug(2, "The codec number is: %d\n", ctx->codec_mode);
+ pix_mp->height = 0;
+ pix_mp->width = 0;
+ if (pix_mp->plane_fmt[0].sizeimage)
+ ctx->dec_src_buf_size = pix_mp->plane_fmt[0].sizeimage;
+ else
+ pix_mp->plane_fmt[0].sizeimage = ctx->dec_src_buf_size =
DEF_CPB_SIZE;
- pix_mp->plane_fmt[0].bytesperline = 0;
- ctx->state = MFCINST_INIT;
+ pix_mp->plane_fmt[0].bytesperline = 0;
+ ctx->state = MFCINST_INIT;
+ ret = 0;
+ goto out;
+ } else {
+ mfc_err("Wrong type error for S_FMT : %d", f->type);
+ ret = -EINVAL;
+ goto out;
+ }
+
out:
mfc_debug_leave();
return ret;
diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
index 2549967..59e56f4 100644
--- a/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
+++ b/drivers/media/platform/s5p-mfc/s5p_mfc_enc.c
@@ -906,6 +906,7 @@
static int vidioc_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
{
+ struct s5p_mfc_dev *dev = video_drvdata(file);
struct s5p_mfc_fmt *fmt;
struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
@@ -930,6 +931,18 @@
return -EINVAL;
}
+ if (!IS_MFCV6(dev)) {
+ if (fmt->fourcc == V4L2_PIX_FMT_NV12MT_16X16) {
+ mfc_err("Not supported format.\n");
+ return -EINVAL;
+ }
+ } else if (IS_MFCV6(dev)) {
+ if (fmt->fourcc == V4L2_PIX_FMT_NV12MT) {
+ mfc_err("Not supported format.\n");
+ return -EINVAL;
+ }
+ }
+
if (fmt->num_planes != pix_fmt_mp->num_planes) {
mfc_err("failed to try output format\n");
return -EINVAL;
@@ -947,7 +960,6 @@
{
struct s5p_mfc_dev *dev = video_drvdata(file);
struct s5p_mfc_ctx *ctx = fh_to_ctx(priv);
- struct s5p_mfc_fmt *fmt;
struct v4l2_pix_format_mplane *pix_fmt_mp = &f->fmt.pix_mp;
int ret = 0;
@@ -960,13 +972,9 @@
goto out;
}
if (f->type == V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE) {
- fmt = find_format(f, MFC_FMT_ENC);
- if (!fmt) {
- mfc_err("failed to set capture format\n");
- return -EINVAL;
- }
+ /* dst_fmt is validated by call to vidioc_try_fmt */
+ ctx->dst_fmt = find_format(f, MFC_FMT_ENC);
ctx->state = MFCINST_INIT;
- ctx->dst_fmt = fmt;
ctx->codec_mode = ctx->dst_fmt->codec_mode;
ctx->enc_dst_buf_size = pix_fmt_mp->plane_fmt[0].sizeimage;
pix_fmt_mp->plane_fmt[0].bytesperline = 0;
@@ -987,28 +995,8 @@
}
mfc_debug(2, "Got instance number: %d\n", ctx->inst_no);
} else if (f->type == V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE) {
- fmt = find_format(f, MFC_FMT_RAW);
- if (!fmt) {
- mfc_err("failed to set output format\n");
- return -EINVAL;
- }
-
- if (!IS_MFCV6(dev) &&
- (fmt->fourcc == V4L2_PIX_FMT_NV12MT_16X16)) {
- mfc_err("Not supported format.\n");
- return -EINVAL;
- } else if (IS_MFCV6(dev) &&
- (fmt->fourcc == V4L2_PIX_FMT_NV12MT)) {
- mfc_err("Not supported format.\n");
- return -EINVAL;
- }
-
- if (fmt->num_planes != pix_fmt_mp->num_planes) {
- mfc_err("failed to set output format\n");
- ret = -EINVAL;
- goto out;
- }
- ctx->src_fmt = fmt;
+ /* src_fmt is validated by call to vidioc_try_fmt */
+ ctx->src_fmt = find_format(f, MFC_FMT_RAW);
ctx->img_width = pix_fmt_mp->width;
ctx->img_height = pix_fmt_mp->height;
mfc_debug(2, "codec number: %d\n", ctx->src_fmt->codec_mode);
diff --git a/drivers/media/usb/em28xx/em28xx-i2c.c b/drivers/media/usb/em28xx/em28xx-i2c.c
index 4851cc2..c4ff973 100644
--- a/drivers/media/usb/em28xx/em28xx-i2c.c
+++ b/drivers/media/usb/em28xx/em28xx-i2c.c
@@ -726,7 +726,7 @@
*eedata = data;
*eedata_len = len;
- dev_config = (void *)eedata;
+ dev_config = (void *)*eedata;
switch (le16_to_cpu(dev_config->chip_conf) >> 4 & 0x3) {
case 0:
diff --git a/drivers/media/usb/hdpvr/hdpvr-core.c b/drivers/media/usb/hdpvr/hdpvr-core.c
index cb69405..6e50707 100644
--- a/drivers/media/usb/hdpvr/hdpvr-core.c
+++ b/drivers/media/usb/hdpvr/hdpvr-core.c
@@ -303,6 +303,11 @@
dev->workqueue = 0;
+ /* init video transfer queues first of all */
+ /* to prevent oops in hdpvr_delete() on error paths */
+ INIT_LIST_HEAD(&dev->free_buff_list);
+ INIT_LIST_HEAD(&dev->rec_buff_list);
+
/* register v4l2_device early so it can be used for printks */
if (v4l2_device_register(&interface->dev, &dev->v4l2_dev)) {
dev_err(&interface->dev, "v4l2_device_register failed\n");
@@ -325,10 +330,6 @@
if (!dev->workqueue)
goto error;
- /* init video transfer queues */
- INIT_LIST_HEAD(&dev->free_buff_list);
- INIT_LIST_HEAD(&dev->rec_buff_list);
-
dev->options = hdpvr_default_options;
if (default_video_input < HDPVR_VIDEO_INPUTS)
@@ -405,7 +406,7 @@
video_nr[atomic_inc_return(&dev_nr)]);
if (retval < 0) {
v4l2_err(&dev->v4l2_dev, "registering videodev failed\n");
- goto error;
+ goto reg_fail;
}
/* let the user know what node this device is now attached to */
diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig
index 8864436..7c5b860 100644
--- a/drivers/media/usb/usbtv/Kconfig
+++ b/drivers/media/usb/usbtv/Kconfig
@@ -1,6 +1,6 @@
config VIDEO_USBTV
tristate "USBTV007 video capture support"
- depends on VIDEO_DEV
+ depends on VIDEO_V4L2
select VIDEOBUF2_VMALLOC
---help---
diff --git a/drivers/media/usb/usbtv/usbtv.c b/drivers/media/usb/usbtv/usbtv.c
index bf43f87..91650173 100644
--- a/drivers/media/usb/usbtv/usbtv.c
+++ b/drivers/media/usb/usbtv/usbtv.c
@@ -57,7 +57,7 @@
#define USBTV_CHUNK_SIZE 256
#define USBTV_CHUNK 240
#define USBTV_CHUNKS (USBTV_WIDTH * USBTV_HEIGHT \
- / 2 / USBTV_CHUNK)
+ / 4 / USBTV_CHUNK)
/* Chunk header. */
#define USBTV_MAGIC_OK(chunk) ((be32_to_cpu(chunk[0]) & 0xff000000) \
@@ -89,6 +89,7 @@
/* Number of currently processed frame, useful find
* out when a new one begins. */
u32 frame_id;
+ int chunks_done;
int iso_size;
unsigned int sequence;
@@ -202,6 +203,26 @@
return 0;
}
+/* Copy data from chunk into a frame buffer, deinterlacing the data
+ * into every second line. Unfortunately, they don't align nicely into
+ * 720 pixel lines, as the chunk is 240 words long, which is 480 pixels.
+ * Therefore, we break down the chunk into two halves before copyting,
+ * so that we can interleave a line if needed. */
+static void usbtv_chunk_to_vbuf(u32 *frame, u32 *src, int chunk_no, int odd)
+{
+ int half;
+
+ for (half = 0; half < 2; half++) {
+ int part_no = chunk_no * 2 + half;
+ int line = part_no / 3;
+ int part_index = (line * 2 + !odd) * 3 + (part_no % 3);
+
+ u32 *dst = &frame[part_index * USBTV_CHUNK/2];
+ memcpy(dst, src, USBTV_CHUNK/2 * sizeof(*src));
+ src += USBTV_CHUNK/2;
+ }
+}
+
/* Called for each 256-byte image chunk.
* First word identifies the chunk, followed by 240 words of image
* data and padding. */
@@ -218,17 +239,17 @@
frame_id = USBTV_FRAME_ID(chunk);
odd = USBTV_ODD(chunk);
chunk_no = USBTV_CHUNK_NO(chunk);
-
- /* Deinterlace. TODO: Use interlaced frame format. */
- chunk_no = (chunk_no - chunk_no % 3) * 2 + chunk_no % 3;
- chunk_no += !odd * 3;
-
if (chunk_no >= USBTV_CHUNKS)
return;
/* Beginning of a frame. */
- if (chunk_no == 0)
+ if (chunk_no == 0) {
usbtv->frame_id = frame_id;
+ usbtv->chunks_done = 0;
+ }
+
+ if (usbtv->frame_id != frame_id)
+ return;
spin_lock_irqsave(&usbtv->buflock, flags);
if (list_empty(&usbtv->bufs)) {
@@ -241,19 +262,23 @@
buf = list_first_entry(&usbtv->bufs, struct usbtv_buf, list);
frame = vb2_plane_vaddr(&buf->vb, 0);
- /* Copy the chunk. */
- memcpy(&frame[chunk_no * USBTV_CHUNK], &chunk[1],
- USBTV_CHUNK * sizeof(chunk[1]));
+ /* Copy the chunk data. */
+ usbtv_chunk_to_vbuf(frame, &chunk[1], chunk_no, odd);
+ usbtv->chunks_done++;
/* Last chunk in a frame, signalling an end */
- if (usbtv->frame_id && chunk_no == USBTV_CHUNKS-1) {
+ if (odd && chunk_no == USBTV_CHUNKS-1) {
int size = vb2_plane_size(&buf->vb, 0);
+ enum vb2_buffer_state state = usbtv->chunks_done ==
+ USBTV_CHUNKS ?
+ VB2_BUF_STATE_DONE :
+ VB2_BUF_STATE_ERROR;
buf->vb.v4l2_buf.field = V4L2_FIELD_INTERLACED;
buf->vb.v4l2_buf.sequence = usbtv->sequence++;
v4l2_get_timestamp(&buf->vb.v4l2_buf.timestamp);
vb2_set_plane_payload(&buf->vb, 0, size);
- vb2_buffer_done(&buf->vb, VB2_BUF_STATE_DONE);
+ vb2_buffer_done(&buf->vb, state);
list_del(&buf->list);
}
@@ -518,7 +543,7 @@
if (*nbuffers < 2)
*nbuffers = 2;
*nplanes = 1;
- sizes[0] = USBTV_CHUNK * USBTV_CHUNKS * sizeof(u32);
+ sizes[0] = USBTV_WIDTH * USBTV_HEIGHT / 2 * sizeof(u32);
return 0;
}
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index dbdc5f7..01e264f 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -317,13 +317,20 @@
/* ACPI bus type */
static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
{
- struct pci_dev * pci_dev;
- u64 addr;
+ struct pci_dev *pci_dev = to_pci_dev(dev);
+ bool is_bridge;
+ u64 addr;
- pci_dev = to_pci_dev(dev);
+ /*
+ * pci_is_bridge() is not suitable here, because pci_dev->subordinate
+ * is set only after acpi_pci_find_device() has been called for the
+ * given device.
+ */
+ is_bridge = pci_dev->hdr_type == PCI_HEADER_TYPE_BRIDGE
+ || pci_dev->hdr_type == PCI_HEADER_TYPE_CARDBUS;
/* Please ref to ACPI spec for the syntax of _ADR */
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
- *handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
+ *handle = acpi_find_child(ACPI_HANDLE(dev->parent), addr, is_bridge);
if (!*handle)
return -ENODEV;
return 0;
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 17150a7..451bf99 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2392,6 +2392,12 @@
rc = cqr->intrc;
else
rc = -EIO;
+
+ /* kick tasklets */
+ dasd_schedule_device_bh(device);
+ if (device->block)
+ dasd_schedule_block_bh(device->block);
+
return rc;
}
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index b6d1f92..c18c681 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -38,7 +38,7 @@
#define DRV_NAME "fnic"
#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
-#define DRV_VERSION "1.5.0.22"
+#define DRV_VERSION "1.5.0.23"
#define PFX DRV_NAME ": "
#define DFX DRV_NAME "%d: "
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index 5f09d18..42e15ee 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -642,19 +642,6 @@
INIT_WORK(&fnic->fip_frame_work, fnic_handle_fip_frame);
INIT_WORK(&fnic->event_work, fnic_handle_event);
skb_queue_head_init(&fnic->fip_frame_queue);
- spin_lock_irqsave(&fnic_list_lock, flags);
- if (!fnic_fip_queue) {
- fnic_fip_queue =
- create_singlethread_workqueue("fnic_fip_q");
- if (!fnic_fip_queue) {
- spin_unlock_irqrestore(&fnic_list_lock, flags);
- printk(KERN_ERR PFX "fnic FIP work queue "
- "create failed\n");
- err = -ENOMEM;
- goto err_out_free_max_pool;
- }
- }
- spin_unlock_irqrestore(&fnic_list_lock, flags);
INIT_LIST_HEAD(&fnic->evlist);
INIT_LIST_HEAD(&fnic->vlans);
} else {
@@ -960,6 +947,13 @@
spin_lock_init(&fnic_list_lock);
INIT_LIST_HEAD(&fnic_list);
+ fnic_fip_queue = create_singlethread_workqueue("fnic_fip_q");
+ if (!fnic_fip_queue) {
+ printk(KERN_ERR PFX "fnic FIP work queue create failed\n");
+ err = -ENOMEM;
+ goto err_create_fip_workq;
+ }
+
fnic_fc_transport = fc_attach_transport(&fnic_fc_functions);
if (!fnic_fc_transport) {
printk(KERN_ERR PFX "fc_attach_transport error\n");
@@ -978,6 +972,8 @@
err_pci_register:
fc_release_transport(fnic_fc_transport);
err_fc_transport:
+ destroy_workqueue(fnic_fip_queue);
+err_create_fip_workq:
destroy_workqueue(fnic_event_queue);
err_create_fnic_workq:
kmem_cache_destroy(fnic_io_req_cache);
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 0177295..1f0ca68 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -3547,11 +3547,21 @@
break;
}
- /*
- * We expect the FW state to be READY
- */
- if (megasas_transition_to_ready(instance, 0))
- goto fail_ready_state;
+ if (megasas_transition_to_ready(instance, 0)) {
+ atomic_set(&instance->fw_reset_no_pci_access, 1);
+ instance->instancet->adp_reset
+ (instance, instance->reg_set);
+ atomic_set(&instance->fw_reset_no_pci_access, 0);
+ dev_info(&instance->pdev->dev,
+ "megasas: FW restarted successfully from %s!\n",
+ __func__);
+
+ /*waitting for about 30 second before retry*/
+ ssleep(30);
+
+ if (megasas_transition_to_ready(instance, 0))
+ goto fail_ready_state;
+ }
/*
* MSI-X host index 0 is common for all adapter.
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 3b1ea34..eaa808e 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -1031,6 +1031,9 @@
{
int i, result;
+ if (sdev->skip_vpd_pages)
+ goto fail;
+
/* Ask for all the pages supported by this device */
result = scsi_vpd_inquiry(sdev, buf, 0, buf_len);
if (result)
diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c
index 2168258..74b88ef 100644
--- a/drivers/scsi/virtio_scsi.c
+++ b/drivers/scsi/virtio_scsi.c
@@ -751,7 +751,7 @@
vscsi->affinity_hint_set = true;
} else {
- for (i = 0; i < vscsi->num_queues - VIRTIO_SCSI_VQ_BASE; i++)
+ for (i = 0; i < vscsi->num_queues; i++)
virtqueue_set_affinity(vscsi->req_vqs[i].vq, -1);
vscsi->affinity_hint_set = false;
diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 222d3e3..707966b 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -609,7 +609,7 @@
else
buf = (void *)t->tx_buf;
t->tx_dma = dma_map_single(&spi->dev, buf,
- t->len, DMA_FROM_DEVICE);
+ t->len, DMA_TO_DEVICE);
if (!t->tx_dma) {
ret = -EFAULT;
goto err_tx_map;
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index dcceed2..81972fa 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1811,10 +1811,12 @@
#else
if (*zcache_comp_name != '\0') {
ret = crypto_has_comp(zcache_comp_name, 0, 0);
- if (!ret)
+ if (!ret) {
pr_info("zcache: %s not supported\n",
zcache_comp_name);
- goto out;
+ ret = 1;
+ goto out;
+ }
}
if (!ret)
strcpy(zcache_comp_name, "lzo");
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 4a8a1d6..558313d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4798,7 +4798,8 @@
hub->ports[i - 1]->child;
dev_dbg(hub_dev, "warm reset port %d\n", i);
- if (!udev) {
+ if (!udev || !(portstatus &
+ USB_PORT_STAT_CONNECTION)) {
status = hub_port_reset(hub, i,
NULL, HUB_BH_RESET_TIME,
true);
@@ -4808,8 +4809,8 @@
usb_lock_device(udev);
status = usb_reset_device(udev);
usb_unlock_device(udev);
+ connect_change = 0;
}
- connect_change = 0;
}
if (connect_change)
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index df6978a..6f8c2fd 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -24,6 +24,7 @@
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/dmapool.h>
+#include <linux/dma-mapping.h>
#include "xhci.h"
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 41eb4fc..9478caa 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -27,6 +27,7 @@
#include <linux/moduleparam.h>
#include <linux/slab.h>
#include <linux/dmi.h>
+#include <linux/dma-mapping.h>
#include "xhci.h"
diff --git a/drivers/video/mxsfb.c b/drivers/video/mxsfb.c
index 3ba3771..dc09ebe 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/mxsfb.c
@@ -239,24 +239,6 @@
}
};
-static const struct fb_bitfield def_rgb666[] = {
- [RED] = {
- .offset = 16,
- .length = 6,
- },
- [GREEN] = {
- .offset = 8,
- .length = 6,
- },
- [BLUE] = {
- .offset = 0,
- .length = 6,
- },
- [TRANSP] = { /* no support for transparency */
- .length = 0,
- }
-};
-
static const struct fb_bitfield def_rgb888[] = {
[RED] = {
.offset = 16,
@@ -309,9 +291,6 @@
break;
case STMLCDIF_16BIT:
case STMLCDIF_18BIT:
- /* 24 bit to 18 bit mapping */
- rgb = def_rgb666;
- break;
case STMLCDIF_24BIT:
/* real 24 bit */
rgb = def_rgb888;
@@ -453,11 +432,6 @@
return -EINVAL;
case STMLCDIF_16BIT:
case STMLCDIF_18BIT:
- /* 24 bit to 18 bit mapping */
- ctrl |= CTRL_DF24; /* ignore the upper 2 bits in
- * each colour component
- */
- break;
case STMLCDIF_24BIT:
/* real 24 bit */
break;
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/omap2/displays-new/connector-analog-tv.c
index 5338f36..1b60698 100644
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/omap2/displays-new/connector-analog-tv.c
@@ -28,6 +28,20 @@
bool invert_polarity;
};
+static const struct omap_video_timings tvc_pal_timings = {
+ .x_res = 720,
+ .y_res = 574,
+ .pixel_clock = 13500,
+ .hsw = 64,
+ .hfp = 12,
+ .hbp = 68,
+ .vsw = 5,
+ .vfp = 5,
+ .vbp = 41,
+
+ .interlace = true,
+};
+
#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
static int tvc_connect(struct omap_dss_device *dssdev)
@@ -212,14 +226,14 @@
return -ENODEV;
}
- ddata->timings = omap_dss_pal_timings;
+ ddata->timings = tvc_pal_timings;
dssdev = &ddata->dssdev;
dssdev->driver = &tvc_driver;
dssdev->dev = &pdev->dev;
dssdev->type = OMAP_DISPLAY_TYPE_VENC;
dssdev->owner = THIS_MODULE;
- dssdev->panel.timings = omap_dss_pal_timings;
+ dssdev->panel.timings = tvc_pal_timings;
r = omapdss_register_display(dssdev);
if (r) {
diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c
index eaf1333..8bc5e8c 100644
--- a/fs/btrfs/backref.c
+++ b/fs/btrfs/backref.c
@@ -36,16 +36,23 @@
u64 extent_item_pos,
struct extent_inode_elem **eie)
{
- u64 data_offset;
- u64 data_len;
+ u64 offset = 0;
struct extent_inode_elem *e;
- data_offset = btrfs_file_extent_offset(eb, fi);
- data_len = btrfs_file_extent_num_bytes(eb, fi);
+ if (!btrfs_file_extent_compression(eb, fi) &&
+ !btrfs_file_extent_encryption(eb, fi) &&
+ !btrfs_file_extent_other_encoding(eb, fi)) {
+ u64 data_offset;
+ u64 data_len;
- if (extent_item_pos < data_offset ||
- extent_item_pos >= data_offset + data_len)
- return 1;
+ data_offset = btrfs_file_extent_offset(eb, fi);
+ data_len = btrfs_file_extent_num_bytes(eb, fi);
+
+ if (extent_item_pos < data_offset ||
+ extent_item_pos >= data_offset + data_len)
+ return 1;
+ offset = extent_item_pos - data_offset;
+ }
e = kmalloc(sizeof(*e), GFP_NOFS);
if (!e)
@@ -53,7 +60,7 @@
e->next = *eie;
e->inum = key->objectid;
- e->offset = key->offset + (extent_item_pos - data_offset);
+ e->offset = key->offset + offset;
*eie = e;
return 0;
@@ -189,7 +196,7 @@
struct extent_buffer *eb;
struct btrfs_key key;
struct btrfs_file_extent_item *fi;
- struct extent_inode_elem *eie = NULL;
+ struct extent_inode_elem *eie = NULL, *old = NULL;
u64 disk_byte;
if (level != 0) {
@@ -223,6 +230,7 @@
if (disk_byte == wanted_disk_byte) {
eie = NULL;
+ old = NULL;
if (extent_item_pos) {
ret = check_extent_in_eb(&key, eb, fi,
*extent_item_pos,
@@ -230,18 +238,20 @@
if (ret < 0)
break;
}
- if (!ret) {
- ret = ulist_add(parents, eb->start,
- (uintptr_t)eie, GFP_NOFS);
- if (ret < 0)
- break;
- if (!extent_item_pos) {
- ret = btrfs_next_old_leaf(root, path,
- time_seq);
- continue;
- }
+ if (ret > 0)
+ goto next;
+ ret = ulist_add_merge(parents, eb->start,
+ (uintptr_t)eie,
+ (u64 *)&old, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!ret && extent_item_pos) {
+ while (old->next)
+ old = old->next;
+ old->next = eie;
}
}
+next:
ret = btrfs_next_old_item(root, path, time_seq);
}
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 5bf4c39..ed50460 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1271,7 +1271,6 @@
BUG_ON(!eb_rewin);
}
- extent_buffer_get(eb_rewin);
btrfs_tree_read_unlock(eb);
free_extent_buffer(eb);
diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c
index 583d98b..fe443fe 100644
--- a/fs/btrfs/extent_io.c
+++ b/fs/btrfs/extent_io.c
@@ -4048,7 +4048,7 @@
}
while (!end) {
- u64 offset_in_extent;
+ u64 offset_in_extent = 0;
/* break if the extent we found is outside the range */
if (em->start >= max || extent_map_end(em) < off)
@@ -4064,9 +4064,12 @@
/*
* record the offset from the start of the extent
- * for adjusting the disk offset below
+ * for adjusting the disk offset below. Only do this if the
+ * extent isn't compressed since our in ram offset may be past
+ * what we have actually allocated on disk.
*/
- offset_in_extent = em_start - em->start;
+ if (!test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
+ offset_in_extent = em_start - em->start;
em_end = extent_map_end(em);
em_len = em_end - em_start;
emflags = em->flags;
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index a005fe2..8e686a4 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -596,20 +596,29 @@
if (no_splits)
goto next;
- if (em->block_start < EXTENT_MAP_LAST_BYTE &&
- em->start < start) {
+ if (em->start < start) {
split->start = em->start;
split->len = start - em->start;
- split->orig_start = em->orig_start;
- split->block_start = em->block_start;
- if (compressed)
- split->block_len = em->block_len;
- else
- split->block_len = split->len;
- split->ram_bytes = em->ram_bytes;
- split->orig_block_len = max(split->block_len,
- em->orig_block_len);
+ if (em->block_start < EXTENT_MAP_LAST_BYTE) {
+ split->orig_start = em->orig_start;
+ split->block_start = em->block_start;
+
+ if (compressed)
+ split->block_len = em->block_len;
+ else
+ split->block_len = split->len;
+ split->orig_block_len = max(split->block_len,
+ em->orig_block_len);
+ split->ram_bytes = em->ram_bytes;
+ } else {
+ split->orig_start = split->start;
+ split->block_len = 0;
+ split->block_start = em->block_start;
+ split->orig_block_len = 0;
+ split->ram_bytes = split->len;
+ }
+
split->generation = gen;
split->bdev = em->bdev;
split->flags = flags;
@@ -620,8 +629,7 @@
split = split2;
split2 = NULL;
}
- if (em->block_start < EXTENT_MAP_LAST_BYTE &&
- testend && em->start + em->len > start + len) {
+ if (testend && em->start + em->len > start + len) {
u64 diff = start + len - em->start;
split->start = start + len;
@@ -630,18 +638,28 @@
split->flags = flags;
split->compress_type = em->compress_type;
split->generation = gen;
- split->orig_block_len = max(em->block_len,
- em->orig_block_len);
- split->ram_bytes = em->ram_bytes;
- if (compressed) {
- split->block_len = em->block_len;
- split->block_start = em->block_start;
- split->orig_start = em->orig_start;
+ if (em->block_start < EXTENT_MAP_LAST_BYTE) {
+ split->orig_block_len = max(em->block_len,
+ em->orig_block_len);
+
+ split->ram_bytes = em->ram_bytes;
+ if (compressed) {
+ split->block_len = em->block_len;
+ split->block_start = em->block_start;
+ split->orig_start = em->orig_start;
+ } else {
+ split->block_len = split->len;
+ split->block_start = em->block_start
+ + diff;
+ split->orig_start = em->orig_start;
+ }
} else {
- split->block_len = split->len;
- split->block_start = em->block_start + diff;
- split->orig_start = em->orig_start;
+ split->ram_bytes = split->len;
+ split->orig_start = split->start;
+ split->block_len = 0;
+ split->block_start = em->block_start;
+ split->orig_block_len = 0;
}
ret = add_extent_mapping(em_tree, split, modified);
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 6d1b93c..021694c 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2166,16 +2166,23 @@
if (btrfs_file_extent_disk_bytenr(leaf, extent) != old->bytenr)
continue;
- extent_offset = btrfs_file_extent_offset(leaf, extent);
- if (key.offset - extent_offset != offset)
+ /*
+ * 'offset' refers to the exact key.offset,
+ * NOT the 'offset' field in btrfs_extent_data_ref, ie.
+ * (key.offset - extent_offset).
+ */
+ if (key.offset != offset)
continue;
+ extent_offset = btrfs_file_extent_offset(leaf, extent);
num_bytes = btrfs_file_extent_num_bytes(leaf, extent);
+
if (extent_offset >= old->extent_offset + old->offset +
old->len || extent_offset + num_bytes <=
old->extent_offset + old->offset)
continue;
+ ret = 0;
break;
}
@@ -2187,7 +2194,7 @@
backref->root_id = root_id;
backref->inum = inum;
- backref->file_pos = offset + extent_offset;
+ backref->file_pos = offset;
backref->num_bytes = num_bytes;
backref->extent_offset = extent_offset;
backref->generation = btrfs_file_extent_generation(leaf, extent);
@@ -2210,7 +2217,8 @@
new->path = path;
list_for_each_entry_safe(old, tmp, &new->head, list) {
- ret = iterate_inodes_from_logical(old->bytenr, fs_info,
+ ret = iterate_inodes_from_logical(old->bytenr +
+ old->extent_offset, fs_info,
path, record_one_backref,
old);
BUG_ON(ret < 0 && ret != -ENOENT);
@@ -4391,9 +4399,6 @@
int mask = attr->ia_valid;
int ret;
- if (newsize == oldsize)
- return 0;
-
/*
* The regular truncate() case without ATTR_CTIME and ATTR_MTIME is a
* special case where we need to update the times despite not having
@@ -5165,14 +5170,31 @@
}
/* Reached end of directory/root. Bump pos past the last item. */
- if (key_type == BTRFS_DIR_INDEX_KEY)
- /*
- * 32-bit glibc will use getdents64, but then strtol -
- * so the last number we can serve is this.
- */
- ctx->pos = 0x7fffffff;
- else
- ctx->pos++;
+ ctx->pos++;
+
+ /*
+ * Stop new entries from being returned after we return the last
+ * entry.
+ *
+ * New directory entries are assigned a strictly increasing
+ * offset. This means that new entries created during readdir
+ * are *guaranteed* to be seen in the future by that readdir.
+ * This has broken buggy programs which operate on names as
+ * they're returned by readdir. Until we re-use freed offsets
+ * we have this hack to stop new entries from being returned
+ * under the assumption that they'll never reach this huge
+ * offset.
+ *
+ * This is being careful not to overflow 32bit loff_t unless the
+ * last entry requires it because doing so has broken 32bit apps
+ * in the past.
+ */
+ if (key_type == BTRFS_DIR_INDEX_KEY) {
+ if (ctx->pos >= INT_MAX)
+ ctx->pos = LLONG_MAX;
+ else
+ ctx->pos = INT_MAX;
+ }
nopos:
ret = 0;
err:
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index d58cce7..af1931a 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -983,12 +983,12 @@
* a dirty root struct and adds it into the list of dead roots that need to
* be deleted
*/
-int btrfs_add_dead_root(struct btrfs_root *root)
+void btrfs_add_dead_root(struct btrfs_root *root)
{
spin_lock(&root->fs_info->trans_lock);
- list_add_tail(&root->root_list, &root->fs_info->dead_roots);
+ if (list_empty(&root->root_list))
+ list_add_tail(&root->root_list, &root->fs_info->dead_roots);
spin_unlock(&root->fs_info->trans_lock);
- return 0;
}
/*
@@ -1925,7 +1925,7 @@
}
root = list_first_entry(&fs_info->dead_roots,
struct btrfs_root, root_list);
- list_del(&root->root_list);
+ list_del_init(&root->root_list);
spin_unlock(&fs_info->trans_lock);
pr_debug("btrfs: cleaner removing %llu\n",
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 005b037..defbc42 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -143,7 +143,7 @@
int btrfs_write_and_wait_transaction(struct btrfs_trans_handle *trans,
struct btrfs_root *root);
-int btrfs_add_dead_root(struct btrfs_root *root);
+void btrfs_add_dead_root(struct btrfs_root *root);
int btrfs_defrag_root(struct btrfs_root *root);
int btrfs_clean_one_deleted_snapshot(struct btrfs_root *root);
int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index 2c67914..ff60d89 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -3746,8 +3746,9 @@
}
log_extents:
+ btrfs_release_path(path);
+ btrfs_release_path(dst_path);
if (fast_search) {
- btrfs_release_path(dst_path);
ret = btrfs_log_changed_extents(trans, root, inode, dst_path);
if (ret) {
err = ret;
@@ -3764,8 +3765,6 @@
}
if (inode_only == LOG_INODE_ALL && S_ISDIR(inode->i_mode)) {
- btrfs_release_path(path);
- btrfs_release_path(dst_path);
ret = log_directory_changes(trans, root, inode, path, dst_path);
if (ret) {
err = ret;
diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c
index 4888cb3..c7c83ff 100644
--- a/fs/debugfs/inode.c
+++ b/fs/debugfs/inode.c
@@ -533,8 +533,7 @@
*/
void debugfs_remove_recursive(struct dentry *dentry)
{
- struct dentry *child;
- struct dentry *parent;
+ struct dentry *child, *next, *parent;
if (IS_ERR_OR_NULL(dentry))
return;
@@ -544,61 +543,37 @@
return;
parent = dentry;
+ down:
mutex_lock(&parent->d_inode->i_mutex);
+ list_for_each_entry_safe(child, next, &parent->d_subdirs, d_u.d_child) {
+ if (!debugfs_positive(child))
+ continue;
- while (1) {
- /*
- * When all dentries under "parent" has been removed,
- * walk up the tree until we reach our starting point.
- */
- if (list_empty(&parent->d_subdirs)) {
- mutex_unlock(&parent->d_inode->i_mutex);
- if (parent == dentry)
- break;
- parent = parent->d_parent;
- mutex_lock(&parent->d_inode->i_mutex);
- }
- child = list_entry(parent->d_subdirs.next, struct dentry,
- d_u.d_child);
- next_sibling:
-
- /*
- * If "child" isn't empty, walk down the tree and
- * remove all its descendants first.
- */
+ /* perhaps simple_empty(child) makes more sense */
if (!list_empty(&child->d_subdirs)) {
mutex_unlock(&parent->d_inode->i_mutex);
parent = child;
- mutex_lock(&parent->d_inode->i_mutex);
- continue;
+ goto down;
}
- __debugfs_remove(child, parent);
- if (parent->d_subdirs.next == &child->d_u.d_child) {
- /*
- * Try the next sibling.
- */
- if (child->d_u.d_child.next != &parent->d_subdirs) {
- child = list_entry(child->d_u.d_child.next,
- struct dentry,
- d_u.d_child);
- goto next_sibling;
- }
-
- /*
- * Avoid infinite loop if we fail to remove
- * one dentry.
- */
- mutex_unlock(&parent->d_inode->i_mutex);
- break;
- }
- simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+ up:
+ if (!__debugfs_remove(child, parent))
+ simple_release_fs(&debugfs_mount, &debugfs_mount_count);
}
- parent = dentry->d_parent;
- mutex_lock(&parent->d_inode->i_mutex);
- __debugfs_remove(dentry, parent);
mutex_unlock(&parent->d_inode->i_mutex);
- simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+ child = parent;
+ parent = parent->d_parent;
+ mutex_lock(&parent->d_inode->i_mutex);
+
+ if (child != dentry) {
+ next = list_entry(child->d_u.d_child.next, struct dentry,
+ d_u.d_child);
+ goto up;
+ }
+
+ if (!__debugfs_remove(child, parent))
+ simple_release_fs(&debugfs_mount, &debugfs_mount_count);
+ mutex_unlock(&parent->d_inode->i_mutex);
}
EXPORT_SYMBOL_GPL(debugfs_remove_recursive);
diff --git a/fs/dlm/user.c b/fs/dlm/user.c
index 911649a..81214911 100644
--- a/fs/dlm/user.c
+++ b/fs/dlm/user.c
@@ -686,7 +686,6 @@
device_remove_lockspace() */
sigprocmask(SIG_SETMASK, &tmpsig, NULL);
- recalc_sigpending();
return 0;
}
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index a618738..72ba470 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -4412,7 +4412,7 @@
retry:
err = ext4_es_remove_extent(inode, last_block,
EXT_MAX_BLOCKS - last_block);
- if (err == ENOMEM) {
+ if (err == -ENOMEM) {
cond_resched();
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f03598c..8bf5999 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -734,11 +734,8 @@
ino = ext4_find_next_zero_bit((unsigned long *)
inode_bitmap_bh->b_data,
EXT4_INODES_PER_GROUP(sb), ino);
- if (ino >= EXT4_INODES_PER_GROUP(sb)) {
- if (++group == ngroups)
- group = 0;
- continue;
- }
+ if (ino >= EXT4_INODES_PER_GROUP(sb))
+ goto next_group;
if (group == 0 && (ino+1) < EXT4_FIRST_INO(sb)) {
ext4_error(sb, "reserved inode found cleared - "
"inode=%lu", ino + 1);
@@ -769,6 +766,9 @@
goto got; /* we grabbed the inode! */
if (ino < EXT4_INODES_PER_GROUP(sb))
goto repeat_in_this_group;
+next_group:
+ if (++group == ngroups)
+ group = 0;
}
err = -ENOSPC;
goto out;
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index ba33c67..dd32a2e 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -555,14 +555,13 @@
int ret;
unsigned long long status;
-#ifdef ES_AGGRESSIVE_TEST
- if (retval != map->m_len) {
- printk("ES len assertion failed for inode: %lu "
- "retval %d != map->m_len %d "
- "in %s (lookup)\n", inode->i_ino, retval,
- map->m_len, __func__);
+ if (unlikely(retval != map->m_len)) {
+ ext4_warning(inode->i_sb,
+ "ES len assertion failed for inode "
+ "%lu: retval %d != map->m_len %d",
+ inode->i_ino, retval, map->m_len);
+ WARN_ON(1);
}
-#endif
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
@@ -656,14 +655,13 @@
int ret;
unsigned long long status;
-#ifdef ES_AGGRESSIVE_TEST
- if (retval != map->m_len) {
- printk("ES len assertion failed for inode: %lu "
- "retval %d != map->m_len %d "
- "in %s (allocation)\n", inode->i_ino, retval,
- map->m_len, __func__);
+ if (unlikely(retval != map->m_len)) {
+ ext4_warning(inode->i_sb,
+ "ES len assertion failed for inode "
+ "%lu: retval %d != map->m_len %d",
+ inode->i_ino, retval, map->m_len);
+ WARN_ON(1);
}
-#endif
/*
* If the extent has been zeroed out, we don't need to update
@@ -1637,14 +1635,13 @@
int ret;
unsigned long long status;
-#ifdef ES_AGGRESSIVE_TEST
- if (retval != map->m_len) {
- printk("ES len assertion failed for inode: %lu "
- "retval %d != map->m_len %d "
- "in %s (lookup)\n", inode->i_ino, retval,
- map->m_len, __func__);
+ if (unlikely(retval != map->m_len)) {
+ ext4_warning(inode->i_sb,
+ "ES len assertion failed for inode "
+ "%lu: retval %d != map->m_len %d",
+ inode->i_ino, retval, map->m_len);
+ WARN_ON(1);
}
-#endif
status = map->m_flags & EXT4_MAP_UNWRITTEN ?
EXTENT_STATUS_UNWRITTEN : EXTENT_STATUS_WRITTEN;
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index bca26f3..36b141e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5481,6 +5481,7 @@
kset_unregister(ext4_kset);
ext4_exit_system_zone();
ext4_exit_pageio();
+ ext4_exit_es();
}
MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
diff --git a/fs/fcntl.c b/fs/fcntl.c
index 6599222..65343c3 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -730,14 +730,14 @@
* Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
* is defined as O_NONBLOCK on some platforms and not on others.
*/
- BUILD_BUG_ON(19 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
+ BUILD_BUG_ON(20 - 1 /* for O_RDONLY being 0 */ != HWEIGHT32(
O_RDONLY | O_WRONLY | O_RDWR |
O_CREAT | O_EXCL | O_NOCTTY |
O_TRUNC | O_APPEND | /* O_NONBLOCK | */
__O_SYNC | O_DSYNC | FASYNC |
O_DIRECT | O_LARGEFILE | O_DIRECTORY |
O_NOFOLLOW | O_NOATIME | O_CLOEXEC |
- __FMODE_EXEC | O_PATH
+ __FMODE_EXEC | O_PATH | __O_TMPFILE
));
fasync_cache = kmem_cache_create("fasync_cache",
diff --git a/fs/lockd/clntlock.c b/fs/lockd/clntlock.c
index 01bfe766..41e491b 100644
--- a/fs/lockd/clntlock.c
+++ b/fs/lockd/clntlock.c
@@ -64,12 +64,17 @@
nlm_init->protocol, nlm_version,
nlm_init->hostname, nlm_init->noresvport,
nlm_init->net);
- if (host == NULL) {
- lockd_down(nlm_init->net);
- return ERR_PTR(-ENOLCK);
- }
+ if (host == NULL)
+ goto out_nohost;
+ if (host->h_rpcclnt == NULL && nlm_bind_host(host) == NULL)
+ goto out_nobind;
return host;
+out_nobind:
+ nlmclnt_release_host(host);
+out_nohost:
+ lockd_down(nlm_init->net);
+ return ERR_PTR(-ENOLCK);
}
EXPORT_SYMBOL_GPL(nlmclnt_init);
diff --git a/fs/lockd/clntproc.c b/fs/lockd/clntproc.c
index 9760ecb..acd3947 100644
--- a/fs/lockd/clntproc.c
+++ b/fs/lockd/clntproc.c
@@ -125,14 +125,15 @@
{
struct nlm_args *argp = &req->a_args;
struct nlm_lock *lock = &argp->lock;
+ char *nodename = req->a_host->h_rpcclnt->cl_nodename;
nlmclnt_next_cookie(&argp->cookie);
memcpy(&lock->fh, NFS_FH(file_inode(fl->fl_file)), sizeof(struct nfs_fh));
- lock->caller = utsname()->nodename;
+ lock->caller = nodename;
lock->oh.data = req->a_owner;
lock->oh.len = snprintf(req->a_owner, sizeof(req->a_owner), "%u@%s",
(unsigned int)fl->fl_u.nfs_fl.owner->pid,
- utsname()->nodename);
+ nodename);
lock->svid = fl->fl_u.nfs_fl.owner->pid;
lock->fl.fl_start = fl->fl_start;
lock->fl.fl_end = fl->fl_end;
diff --git a/fs/namei.c b/fs/namei.c
index 8b61d10..89a612e 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -3671,15 +3671,11 @@
if ((flags & ~(AT_SYMLINK_FOLLOW | AT_EMPTY_PATH)) != 0)
return -EINVAL;
/*
- * To use null names we require CAP_DAC_READ_SEARCH
- * This ensures that not everyone will be able to create
- * handlink using the passed filedescriptor.
+ * Using empty names is equivalent to using AT_SYMLINK_FOLLOW
+ * on /proc/self/fd/<fd>.
*/
- if (flags & AT_EMPTY_PATH) {
- if (!capable(CAP_DAC_READ_SEARCH))
- return -ENOENT;
+ if (flags & AT_EMPTY_PATH)
how = LOOKUP_EMPTY;
- }
if (flags & AT_SYMLINK_FOLLOW)
how |= LOOKUP_FOLLOW;
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index af6e806..941246f 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -463,7 +463,6 @@
unlock_new_inode(inode);
} else
nfs_refresh_inode(inode, fattr);
- nfs_setsecurity(inode, fattr, label);
dprintk("NFS: nfs_fhget(%s/%Ld fh_crc=0x%08x ct=%d)\n",
inode->i_sb->s_id,
(long long)NFS_FILEID(inode),
@@ -963,9 +962,15 @@
static int nfs_invalidate_mapping(struct inode *inode, struct address_space *mapping)
{
struct nfs_inode *nfsi = NFS_I(inode);
-
+ int ret;
+
if (mapping->nrpages != 0) {
- int ret = invalidate_inode_pages2(mapping);
+ if (S_ISREG(inode->i_mode)) {
+ ret = nfs_sync_mapping(mapping);
+ if (ret < 0)
+ return ret;
+ }
+ ret = invalidate_inode_pages2(mapping);
if (ret < 0)
return ret;
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index cf11799..108a774 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3071,15 +3071,13 @@
nfs4_proc_lookup_mountpoint(struct inode *dir, struct qstr *name,
struct nfs_fh *fhandle, struct nfs_fattr *fattr)
{
+ struct rpc_clnt *client = NFS_CLIENT(dir);
int status;
- struct rpc_clnt *client = rpc_clone_client(NFS_CLIENT(dir));
status = nfs4_proc_lookup_common(&client, dir, name, fhandle, fattr, NULL);
- if (status < 0) {
- rpc_shutdown_client(client);
+ if (status < 0)
return ERR_PTR(status);
- }
- return client;
+ return (client == NFS_CLIENT(dir)) ? rpc_clone_client(client) : client;
}
static int _nfs4_proc_access(struct inode *inode, struct nfs_access_entry *entry)
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 71fdc0d..f6db66d 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2478,6 +2478,10 @@
if (server->flags & NFS_MOUNT_NOAC)
sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+ if (mount_info->cloned != NULL && mount_info->cloned->sb != NULL)
+ if (mount_info->cloned->sb->s_flags & MS_SYNCHRONOUS)
+ sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
/* Get a superblock - note that we may end up sharing one that already exists */
s = sget(nfs_mod->nfs_fs, compare_super, nfs_set_super, flags, &sb_mntdata);
if (IS_ERR(s)) {
diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c
index 0d4c410..419572f 100644
--- a/fs/nfsd/nfs4proc.c
+++ b/fs/nfsd/nfs4proc.c
@@ -1524,7 +1524,7 @@
static inline u32 nfsd4_exchange_id_rsize(struct svc_rqst *rqstp, struct nfsd4_op *op)
{
return (op_encode_hdr_size + 2 + 1 + /* eir_clientid, eir_sequenceid */\
- 1 + 1 + 0 + /* eir_flags, spr_how, SP4_NONE (for now) */\
+ 1 + 1 + 2 + /* eir_flags, spr_how, spo_must_enforce & _allow */\
2 + /*eir_server_owner.so_minor_id */\
/* eir_server_owner.so_major_id<> */\
XDR_QUADLEN(NFS4_OPAQUE_LIMIT) + 1 +\
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index 280acef..43f4229 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -1264,6 +1264,8 @@
struct svc_cred *cr = &rqstp->rq_cred;
u32 service;
+ if (!cr->cr_gss_mech)
+ return false;
service = gss_pseudoflavor_to_service(cr->cr_gss_mech, cr->cr_flavor);
return service == RPC_GSS_SVC_INTEGRITY ||
service == RPC_GSS_SVC_PRIVACY;
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index 0c0f3ea9..c2a4701 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -3360,7 +3360,8 @@
8 /* eir_clientid */ +
4 /* eir_sequenceid */ +
4 /* eir_flags */ +
- 4 /* spr_how (SP4_NONE) */ +
+ 4 /* spr_how */ +
+ 8 /* spo_must_enforce, spo_must_allow */ +
8 /* so_minor_id */ +
4 /* so_major_id.len */ +
(XDR_QUADLEN(major_id_sz) * 4) +
@@ -3372,8 +3373,6 @@
WRITE32(exid->seqid);
WRITE32(exid->flags);
- /* state_protect4_r. Currently only support SP4_NONE */
- BUG_ON(exid->spa_how != SP4_NONE);
WRITE32(exid->spa_how);
switch (exid->spa_how) {
case SP4_NONE:
diff --git a/fs/open.c b/fs/open.c
index d53e298..7931f76 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -823,7 +823,7 @@
int lookup_flags = 0;
int acc_mode;
- if (flags & O_CREAT)
+ if (flags & (O_CREAT | __O_TMPFILE))
op->mode = (mode & S_IALLUGO) | S_IFREG;
else
op->mode = 0;
diff --git a/fs/reiserfs/procfs.c b/fs/reiserfs/procfs.c
index 33532f7..a958444 100644
--- a/fs/reiserfs/procfs.c
+++ b/fs/reiserfs/procfs.c
@@ -19,12 +19,13 @@
/*
* LOCKING:
*
- * We rely on new Alexander Viro's super-block locking.
+ * These guys are evicted from procfs as the very first step in ->kill_sb().
*
*/
-static int show_version(struct seq_file *m, struct super_block *sb)
+static int show_version(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
char *format;
if (REISERFS_SB(sb)->s_properties & (1 << REISERFS_3_6)) {
@@ -66,8 +67,9 @@
#define DJP( x ) le32_to_cpu( jp -> x )
#define JF( x ) ( r -> s_journal -> x )
-static int show_super(struct seq_file *m, struct super_block *sb)
+static int show_super(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *r = REISERFS_SB(sb);
seq_printf(m, "state: \t%s\n"
@@ -128,8 +130,9 @@
return 0;
}
-static int show_per_level(struct seq_file *m, struct super_block *sb)
+static int show_per_level(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *r = REISERFS_SB(sb);
int level;
@@ -186,8 +189,9 @@
return 0;
}
-static int show_bitmap(struct seq_file *m, struct super_block *sb)
+static int show_bitmap(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *r = REISERFS_SB(sb);
seq_printf(m, "free_block: %lu\n"
@@ -218,8 +222,9 @@
return 0;
}
-static int show_on_disk_super(struct seq_file *m, struct super_block *sb)
+static int show_on_disk_super(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *sb_info = REISERFS_SB(sb);
struct reiserfs_super_block *rs = sb_info->s_rs;
int hash_code = DFL(s_hash_function_code);
@@ -261,8 +266,9 @@
return 0;
}
-static int show_oidmap(struct seq_file *m, struct super_block *sb)
+static int show_oidmap(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *sb_info = REISERFS_SB(sb);
struct reiserfs_super_block *rs = sb_info->s_rs;
unsigned int mapsize = le16_to_cpu(rs->s_v1.s_oid_cursize);
@@ -291,8 +297,9 @@
return 0;
}
-static int show_journal(struct seq_file *m, struct super_block *sb)
+static int show_journal(struct seq_file *m, void *unused)
{
+ struct super_block *sb = m->private;
struct reiserfs_sb_info *r = REISERFS_SB(sb);
struct reiserfs_super_block *rs = r->s_rs;
struct journal_params *jp = &rs->s_v1.s_journal;
@@ -383,92 +390,24 @@
return 0;
}
-/* iterator */
-static int test_sb(struct super_block *sb, void *data)
-{
- return data == sb;
-}
-
-static int set_sb(struct super_block *sb, void *data)
-{
- return -ENOENT;
-}
-
-struct reiserfs_seq_private {
- struct super_block *sb;
- int (*show) (struct seq_file *, struct super_block *);
-};
-
-static void *r_start(struct seq_file *m, loff_t * pos)
-{
- struct reiserfs_seq_private *priv = m->private;
- loff_t l = *pos;
-
- if (l)
- return NULL;
-
- if (IS_ERR(sget(&reiserfs_fs_type, test_sb, set_sb, 0, priv->sb)))
- return NULL;
-
- up_write(&priv->sb->s_umount);
- return priv->sb;
-}
-
-static void *r_next(struct seq_file *m, void *v, loff_t * pos)
-{
- ++*pos;
- if (v)
- deactivate_super(v);
- return NULL;
-}
-
-static void r_stop(struct seq_file *m, void *v)
-{
- if (v)
- deactivate_super(v);
-}
-
-static int r_show(struct seq_file *m, void *v)
-{
- struct reiserfs_seq_private *priv = m->private;
- return priv->show(m, v);
-}
-
-static const struct seq_operations r_ops = {
- .start = r_start,
- .next = r_next,
- .stop = r_stop,
- .show = r_show,
-};
-
static int r_open(struct inode *inode, struct file *file)
{
- struct reiserfs_seq_private *priv;
- int ret = seq_open_private(file, &r_ops,
- sizeof(struct reiserfs_seq_private));
-
- if (!ret) {
- struct seq_file *m = file->private_data;
- priv = m->private;
- priv->sb = proc_get_parent_data(inode);
- priv->show = PDE_DATA(inode);
- }
- return ret;
+ return single_open(file, PDE_DATA(inode),
+ proc_get_parent_data(inode));
}
static const struct file_operations r_file_operations = {
.open = r_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release_private,
- .owner = THIS_MODULE,
+ .release = single_release,
};
static struct proc_dir_entry *proc_info_root = NULL;
static const char proc_info_root_name[] = "fs/reiserfs";
static void add_file(struct super_block *sb, char *name,
- int (*func) (struct seq_file *, struct super_block *))
+ int (*func) (struct seq_file *, void *))
{
proc_create_data(name, 0, REISERFS_SB(sb)->procdir,
&r_file_operations, func);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index f8a23c3..e2e202a 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -499,6 +499,7 @@
static void reiserfs_kill_sb(struct super_block *s)
{
if (REISERFS_SB(s)) {
+ reiserfs_proc_info_done(s);
/*
* Force any pending inode evictions to occur now. Any
* inodes to be removed that have extended attributes
@@ -554,8 +555,6 @@
REISERFS_SB(s)->reserved_blocks);
}
- reiserfs_proc_info_done(s);
-
reiserfs_write_unlock(s);
mutex_destroy(&REISERFS_SB(s)->lock);
kfree(s->s_fs_info);
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 56e6b68..94383a7 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -274,15 +274,12 @@
};
struct acpi_device_physical_node {
- u8 node_id;
+ unsigned int node_id;
struct list_head node;
struct device *dev;
bool put_online:1;
};
-/* set maximum of physical nodes to 32 for expansibility */
-#define ACPI_MAX_PHYSICAL_NODE 32
-
/* Device */
struct acpi_device {
int device_type;
@@ -302,10 +299,9 @@
struct acpi_driver *driver;
void *driver_data;
struct device dev;
- u8 physical_node_count;
+ unsigned int physical_node_count;
struct list_head physical_node_list;
struct mutex physical_node_lock;
- DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE);
struct list_head power_dependent;
void (*remove)(struct acpi_device *);
};
@@ -445,7 +441,11 @@
};
/* helper */
-acpi_handle acpi_get_child(acpi_handle, u64);
+acpi_handle acpi_find_child(acpi_handle, u64, bool);
+static inline acpi_handle acpi_get_child(acpi_handle handle, u64 addr)
+{
+ return acpi_find_child(handle, addr, false);
+}
int acpi_is_root_bridge(acpi_handle);
struct acpi_pci_root *acpi_pci_find_root(acpi_handle handle);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)ACPI_HANDLE(dev))
diff --git a/include/dt-bindings/pinctrl/nomadik.h b/include/dt-bindings/pinctrl/nomadik.h
new file mode 100644
index 0000000..638fb32
--- /dev/null
+++ b/include/dt-bindings/pinctrl/nomadik.h
@@ -0,0 +1,36 @@
+/*
+ * nomadik.h
+ *
+ * Copyright (C) ST-Ericsson SA 2013
+ * Author: Gabriel Fernandez <gabriel.fernandez@st.com> for ST-Ericsson.
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#define INPUT_NOPULL 0
+#define INPUT_PULLUP 1
+#define INPUT_PULLDOWN 2
+
+#define OUTPUT_LOW 0
+#define OUTPUT_HIGH 1
+#define DIR_OUTPUT 2
+
+#define SLPM_DISABLED 0
+#define SLPM_ENABLED 1
+
+#define SLPM_INPUT_NOPULL 0
+#define SLPM_INPUT_PULLUP 1
+#define SLPM_INPUT_PULLDOWN 2
+#define SLPM_DIR_INPUT 3
+
+#define SLPM_OUTPUT_LOW 0
+#define SLPM_OUTPUT_HIGH 1
+#define SLPM_DIR_OUTPUT 2
+
+#define SLPM_WAKEUP_DISABLE 0
+#define SLPM_WAKEUP_ENABLE 1
+
+#define GPIOMODE_DISABLED 0
+#define GPIOMODE_ENABLED 1
+
+#define SLPM_PDIS_DISABLED 0
+#define SLPM_PDIS_ENABLED 1
diff --git a/include/linux/ftrace_event.h b/include/linux/ftrace_event.h
index 4372658..120d57a 100644
--- a/include/linux/ftrace_event.h
+++ b/include/linux/ftrace_event.h
@@ -78,6 +78,11 @@
/* trace_seq for __print_flags() and __print_symbolic() etc. */
struct trace_seq tmp_seq;
+ cpumask_var_t started;
+
+ /* it's true when current open file is snapshot */
+ bool snapshot;
+
/* The below is zeroed out in pipe_read */
struct trace_seq seq;
struct trace_entry *ent;
@@ -90,10 +95,7 @@
loff_t pos;
long idx;
- cpumask_var_t started;
-
- /* it's true when current open file is snapshot */
- bool snapshot;
+ /* All new field here will be zeroed out in pipe_read */
};
enum trace_iter_flags {
@@ -332,7 +334,7 @@
const char *name, int offset, int size,
int is_signed, int filter_type);
extern int trace_add_event_call(struct ftrace_event_call *call);
-extern void trace_remove_event_call(struct ftrace_event_call *call);
+extern int trace_remove_event_call(struct ftrace_event_call *call);
#define is_signed_type(type) (((type)(-1)) < (type)1)
diff --git a/include/linux/iio/trigger.h b/include/linux/iio/trigger.h
index 3869c52..369cf2c 100644
--- a/include/linux/iio/trigger.h
+++ b/include/linux/iio/trigger.h
@@ -8,6 +8,7 @@
*/
#include <linux/irq.h>
#include <linux/module.h>
+#include <linux/atomic.h>
#ifndef _IIO_TRIGGER_H_
#define _IIO_TRIGGER_H_
@@ -61,7 +62,7 @@
struct list_head list;
struct list_head alloc_list;
- int use_count;
+ atomic_t use_count;
struct irq_chip subirq_chip;
int subirq_base;
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 3bef14c..482ad2d 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -629,7 +629,7 @@
static inline void tracing_start(void) { }
static inline void tracing_stop(void) { }
static inline void ftrace_off_permanent(void) { }
-static inline void trace_dump_stack(void) { }
+static inline void trace_dump_stack(int skip) { }
static inline void tracing_on(void) { }
static inline void tracing_off(void) { }
diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
index 8d73fe2..db1791b 100644
--- a/include/linux/mfd/ti_am335x_tscadc.h
+++ b/include/linux/mfd/ti_am335x_tscadc.h
@@ -113,11 +113,27 @@
#define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
#define CNTRLREG_TSCENB BIT(7)
+/* FIFO READ Register */
+#define FIFOREAD_DATA_MASK (0xfff << 0)
+#define FIFOREAD_CHNLID_MASK (0xf << 16)
+
+/* Sequencer Status */
+#define SEQ_STATUS BIT(5)
+
#define ADC_CLK 3000000
#define MAX_CLK_DIV 7
#define TOTAL_STEPS 16
#define TOTAL_CHANNELS 8
+/*
+* ADC runs at 3MHz, and it takes
+* 15 cycles to latch one data output.
+* Hence the idle time for ADC to
+* process one sample data would be
+* around 5 micro seconds.
+*/
+#define IDLE_TIMEOUT 5 /* microsec */
+
#define TSCADC_CELLS 2
struct ti_tscadc_dev {
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 75981d0..580a532 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -15,6 +15,7 @@
#include <linux/list.h>
#include <linux/rbtree.h>
+#include <linux/err.h>
struct module;
struct device;
diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h
index 6d87035..1821445 100644
--- a/include/linux/sunrpc/sched.h
+++ b/include/linux/sunrpc/sched.h
@@ -121,6 +121,7 @@
#define RPC_TASK_SOFTCONN 0x0400 /* Fail if can't connect */
#define RPC_TASK_SENT 0x0800 /* message was sent */
#define RPC_TASK_TIMEOUT 0x1000 /* fail with ETIMEDOUT on timeout */
+#define RPC_TASK_NOCONNECT 0x2000 /* return ENOTCONN if not connected */
#define RPC_IS_ASYNC(t) ((t)->tk_flags & RPC_TASK_ASYNC)
#define RPC_IS_SWAPPER(t) ((t)->tk_flags & RPC_TASK_SWAPPER)
diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h
index b6b215f..14105c2 100644
--- a/include/linux/user_namespace.h
+++ b/include/linux/user_namespace.h
@@ -23,6 +23,7 @@
struct uid_gid_map projid_map;
atomic_t count;
struct user_namespace *parent;
+ int level;
kuid_t owner;
kgid_t group;
unsigned int proc_inum;
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index 7343a27..47ada23 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -22,6 +22,7 @@
#define _V4L2_CTRLS_H
#include <linux/list.h>
+#include <linux/mutex.h>
#include <linux/videodev2.h>
/* forward references */
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 789ec46..781845a 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -4335,8 +4335,10 @@
}
err = percpu_ref_init(&css->refcnt, css_release);
- if (err)
+ if (err) {
+ ss->css_free(cgrp);
goto err_free_all;
+ }
init_cgroup_css(css, ss, cgrp);
diff --git a/kernel/printk/braille.c b/kernel/printk/braille.c
index b51087f..276762f 100644
--- a/kernel/printk/braille.c
+++ b/kernel/printk/braille.c
@@ -19,7 +19,8 @@
pr_err("need port name after brl=\n");
else
*((*str)++) = 0;
- }
+ } else
+ return NULL;
return *str;
}
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 4041f57..a146ee3 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -469,7 +469,6 @@
/* Architecture-specific hardware disable .. */
ptrace_disable(child);
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
- flush_ptrace_hw_breakpoint(child);
write_lock_irq(&tasklist_lock);
/*
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 8ce9eefc..a6d098c 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2169,12 +2169,57 @@
static unsigned long ftrace_update_cnt;
unsigned long ftrace_update_tot_cnt;
-static int ops_traces_mod(struct ftrace_ops *ops)
+static inline int ops_traces_mod(struct ftrace_ops *ops)
{
- struct ftrace_hash *hash;
+ /*
+ * Filter_hash being empty will default to trace module.
+ * But notrace hash requires a test of individual module functions.
+ */
+ return ftrace_hash_empty(ops->filter_hash) &&
+ ftrace_hash_empty(ops->notrace_hash);
+}
- hash = ops->filter_hash;
- return ftrace_hash_empty(hash);
+/*
+ * Check if the current ops references the record.
+ *
+ * If the ops traces all functions, then it was already accounted for.
+ * If the ops does not trace the current record function, skip it.
+ * If the ops ignores the function via notrace filter, skip it.
+ */
+static inline bool
+ops_references_rec(struct ftrace_ops *ops, struct dyn_ftrace *rec)
+{
+ /* If ops isn't enabled, ignore it */
+ if (!(ops->flags & FTRACE_OPS_FL_ENABLED))
+ return 0;
+
+ /* If ops traces all mods, we already accounted for it */
+ if (ops_traces_mod(ops))
+ return 0;
+
+ /* The function must be in the filter */
+ if (!ftrace_hash_empty(ops->filter_hash) &&
+ !ftrace_lookup_ip(ops->filter_hash, rec->ip))
+ return 0;
+
+ /* If in notrace hash, we ignore it too */
+ if (ftrace_lookup_ip(ops->notrace_hash, rec->ip))
+ return 0;
+
+ return 1;
+}
+
+static int referenced_filters(struct dyn_ftrace *rec)
+{
+ struct ftrace_ops *ops;
+ int cnt = 0;
+
+ for (ops = ftrace_ops_list; ops != &ftrace_list_end; ops = ops->next) {
+ if (ops_references_rec(ops, rec))
+ cnt++;
+ }
+
+ return cnt;
}
static int ftrace_update_code(struct module *mod)
@@ -2183,6 +2228,7 @@
struct dyn_ftrace *p;
cycle_t start, stop;
unsigned long ref = 0;
+ bool test = false;
int i;
/*
@@ -2196,9 +2242,12 @@
for (ops = ftrace_ops_list;
ops != &ftrace_list_end; ops = ops->next) {
- if (ops->flags & FTRACE_OPS_FL_ENABLED &&
- ops_traces_mod(ops))
- ref++;
+ if (ops->flags & FTRACE_OPS_FL_ENABLED) {
+ if (ops_traces_mod(ops))
+ ref++;
+ else
+ test = true;
+ }
}
}
@@ -2208,12 +2257,16 @@
for (pg = ftrace_new_pgs; pg; pg = pg->next) {
for (i = 0; i < pg->index; i++) {
+ int cnt = ref;
+
/* If something went wrong, bail without enabling anything */
if (unlikely(ftrace_disabled))
return -1;
p = &pg->records[i];
- p->flags = ref;
+ if (test)
+ cnt += referenced_filters(p);
+ p->flags = cnt;
/*
* Do the initial record conversion from mcount jump
@@ -2233,7 +2286,7 @@
* conversion puts the module to the correct state, thus
* passing the ftrace_make_call check.
*/
- if (ftrace_start_up && ref) {
+ if (ftrace_start_up && cnt) {
int failed = __ftrace_replace_code(p, 1);
if (failed)
ftrace_bug(failed, p->ip);
@@ -3384,6 +3437,12 @@
return add_hash_entry(hash, ip);
}
+static void ftrace_ops_update_code(struct ftrace_ops *ops)
+{
+ if (ops->flags & FTRACE_OPS_FL_ENABLED && ftrace_enabled)
+ ftrace_run_update_code(FTRACE_UPDATE_CALLS);
+}
+
static int
ftrace_set_hash(struct ftrace_ops *ops, unsigned char *buf, int len,
unsigned long ip, int remove, int reset, int enable)
@@ -3426,9 +3485,8 @@
mutex_lock(&ftrace_lock);
ret = ftrace_hash_move(ops, enable, orig_hash, hash);
- if (!ret && ops->flags & FTRACE_OPS_FL_ENABLED
- && ftrace_enabled)
- ftrace_run_update_code(FTRACE_UPDATE_CALLS);
+ if (!ret)
+ ftrace_ops_update_code(ops);
mutex_unlock(&ftrace_lock);
@@ -3655,9 +3713,8 @@
mutex_lock(&ftrace_lock);
ret = ftrace_hash_move(iter->ops, filter_hash,
orig_hash, iter->hash);
- if (!ret && (iter->ops->flags & FTRACE_OPS_FL_ENABLED)
- && ftrace_enabled)
- ftrace_run_update_code(FTRACE_UPDATE_CALLS);
+ if (!ret)
+ ftrace_ops_update_code(iter->ops);
mutex_unlock(&ftrace_lock);
}
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 882ec1d..496f94d 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -243,20 +243,25 @@
}
EXPORT_SYMBOL_GPL(filter_current_check_discard);
-cycle_t ftrace_now(int cpu)
+cycle_t buffer_ftrace_now(struct trace_buffer *buf, int cpu)
{
u64 ts;
/* Early boot up does not have a buffer yet */
- if (!global_trace.trace_buffer.buffer)
+ if (!buf->buffer)
return trace_clock_local();
- ts = ring_buffer_time_stamp(global_trace.trace_buffer.buffer, cpu);
- ring_buffer_normalize_time_stamp(global_trace.trace_buffer.buffer, cpu, &ts);
+ ts = ring_buffer_time_stamp(buf->buffer, cpu);
+ ring_buffer_normalize_time_stamp(buf->buffer, cpu, &ts);
return ts;
}
+cycle_t ftrace_now(int cpu)
+{
+ return buffer_ftrace_now(&global_trace.trace_buffer, cpu);
+}
+
/**
* tracing_is_enabled - Show if global_trace has been disabled
*
@@ -1211,7 +1216,7 @@
/* Make sure all commits have finished */
synchronize_sched();
- buf->time_start = ftrace_now(buf->cpu);
+ buf->time_start = buffer_ftrace_now(buf, buf->cpu);
for_each_online_cpu(cpu)
ring_buffer_reset_cpu(buffer, cpu);
@@ -1219,11 +1224,6 @@
ring_buffer_record_enable(buffer);
}
-void tracing_reset_current(int cpu)
-{
- tracing_reset(&global_trace.trace_buffer, cpu);
-}
-
/* Must have trace_types_lock held */
void tracing_reset_all_online_cpus(void)
{
@@ -4151,6 +4151,7 @@
memset(&iter->seq, 0,
sizeof(struct trace_iterator) -
offsetof(struct trace_iterator, seq));
+ cpumask_clear(iter->started);
iter->pos = -1;
trace_event_read_lock();
@@ -4468,7 +4469,7 @@
/* disable tracing ? */
if (trace_flags & TRACE_ITER_STOP_ON_FREE)
- tracing_off();
+ tracer_tracing_off(tr);
/* resize the ring buffer to 0 */
tracing_resize_ring_buffer(tr, 0, RING_BUFFER_ALL_CPUS);
@@ -4633,12 +4634,12 @@
* New clock may not be consistent with the previous clock.
* Reset the buffer so that it doesn't have incomparable timestamps.
*/
- tracing_reset_online_cpus(&global_trace.trace_buffer);
+ tracing_reset_online_cpus(&tr->trace_buffer);
#ifdef CONFIG_TRACER_MAX_TRACE
if (tr->flags & TRACE_ARRAY_FL_GLOBAL && tr->max_buffer.buffer)
ring_buffer_set_clock(tr->max_buffer.buffer, trace_clocks[i].func);
- tracing_reset_online_cpus(&global_trace.max_buffer);
+ tracing_reset_online_cpus(&tr->max_buffer);
#endif
mutex_unlock(&trace_types_lock);
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 898f868..29a7ebc 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -409,33 +409,42 @@
mutex_unlock(&event_mutex);
}
-/*
- * Open and update trace_array ref count.
- * Must have the current trace_array passed to it.
- */
-static int tracing_open_generic_file(struct inode *inode, struct file *filp)
+static void remove_subsystem(struct ftrace_subsystem_dir *dir)
{
- struct ftrace_event_file *file = inode->i_private;
- struct trace_array *tr = file->tr;
- int ret;
+ if (!dir)
+ return;
- if (trace_array_get(tr) < 0)
- return -ENODEV;
-
- ret = tracing_open_generic(inode, filp);
- if (ret < 0)
- trace_array_put(tr);
- return ret;
+ if (!--dir->nr_events) {
+ debugfs_remove_recursive(dir->entry);
+ list_del(&dir->list);
+ __put_system_dir(dir);
+ }
}
-static int tracing_release_generic_file(struct inode *inode, struct file *filp)
+static void *event_file_data(struct file *filp)
{
- struct ftrace_event_file *file = inode->i_private;
- struct trace_array *tr = file->tr;
+ return ACCESS_ONCE(file_inode(filp)->i_private);
+}
- trace_array_put(tr);
+static void remove_event_file_dir(struct ftrace_event_file *file)
+{
+ struct dentry *dir = file->dir;
+ struct dentry *child;
- return 0;
+ if (dir) {
+ spin_lock(&dir->d_lock); /* probably unneeded */
+ list_for_each_entry(child, &dir->d_subdirs, d_u.d_child) {
+ if (child->d_inode) /* probably unneeded */
+ child->d_inode->i_private = NULL;
+ }
+ spin_unlock(&dir->d_lock);
+
+ debugfs_remove_recursive(dir);
+ }
+
+ list_del(&file->list);
+ remove_subsystem(file->system);
+ kmem_cache_free(file_cachep, file);
}
/*
@@ -679,15 +688,25 @@
event_enable_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
- struct ftrace_event_file *file = filp->private_data;
+ struct ftrace_event_file *file;
+ unsigned long flags;
char buf[4] = "0";
- if (file->flags & FTRACE_EVENT_FL_ENABLED &&
- !(file->flags & FTRACE_EVENT_FL_SOFT_DISABLED))
+ mutex_lock(&event_mutex);
+ file = event_file_data(filp);
+ if (likely(file))
+ flags = file->flags;
+ mutex_unlock(&event_mutex);
+
+ if (!file)
+ return -ENODEV;
+
+ if (flags & FTRACE_EVENT_FL_ENABLED &&
+ !(flags & FTRACE_EVENT_FL_SOFT_DISABLED))
strcpy(buf, "1");
- if (file->flags & FTRACE_EVENT_FL_SOFT_DISABLED ||
- file->flags & FTRACE_EVENT_FL_SOFT_MODE)
+ if (flags & FTRACE_EVENT_FL_SOFT_DISABLED ||
+ flags & FTRACE_EVENT_FL_SOFT_MODE)
strcat(buf, "*");
strcat(buf, "\n");
@@ -699,13 +718,10 @@
event_enable_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
- struct ftrace_event_file *file = filp->private_data;
+ struct ftrace_event_file *file;
unsigned long val;
int ret;
- if (!file)
- return -EINVAL;
-
ret = kstrtoul_from_user(ubuf, cnt, 10, &val);
if (ret)
return ret;
@@ -717,8 +733,11 @@
switch (val) {
case 0:
case 1:
+ ret = -ENODEV;
mutex_lock(&event_mutex);
- ret = ftrace_event_enable_disable(file, val);
+ file = event_file_data(filp);
+ if (likely(file))
+ ret = ftrace_event_enable_disable(file, val);
mutex_unlock(&event_mutex);
break;
@@ -825,7 +844,7 @@
static void *f_next(struct seq_file *m, void *v, loff_t *pos)
{
- struct ftrace_event_call *call = m->private;
+ struct ftrace_event_call *call = event_file_data(m->private);
struct list_head *common_head = &ftrace_common_fields;
struct list_head *head = trace_get_fields(call);
struct list_head *node = v;
@@ -857,7 +876,7 @@
static int f_show(struct seq_file *m, void *v)
{
- struct ftrace_event_call *call = m->private;
+ struct ftrace_event_call *call = event_file_data(m->private);
struct ftrace_event_field *field;
const char *array_descriptor;
@@ -910,6 +929,11 @@
void *p = (void *)FORMAT_HEADER;
loff_t l = 0;
+ /* ->stop() is called even if ->start() fails */
+ mutex_lock(&event_mutex);
+ if (!event_file_data(m->private))
+ return ERR_PTR(-ENODEV);
+
while (l < *pos && p)
p = f_next(m, p, &l);
@@ -918,6 +942,7 @@
static void f_stop(struct seq_file *m, void *p)
{
+ mutex_unlock(&event_mutex);
}
static const struct seq_operations trace_format_seq_ops = {
@@ -929,7 +954,6 @@
static int trace_format_open(struct inode *inode, struct file *file)
{
- struct ftrace_event_call *call = inode->i_private;
struct seq_file *m;
int ret;
@@ -938,7 +962,7 @@
return ret;
m = file->private_data;
- m->private = call;
+ m->private = file;
return 0;
}
@@ -946,14 +970,18 @@
static ssize_t
event_id_read(struct file *filp, char __user *ubuf, size_t cnt, loff_t *ppos)
{
- struct ftrace_event_call *call = filp->private_data;
+ int id = (long)event_file_data(filp);
char buf[32];
int len;
if (*ppos)
return 0;
- len = sprintf(buf, "%d\n", call->event.type);
+ if (unlikely(!id))
+ return -ENODEV;
+
+ len = sprintf(buf, "%d\n", id);
+
return simple_read_from_buffer(ubuf, cnt, ppos, buf, len);
}
@@ -961,21 +989,28 @@
event_filter_read(struct file *filp, char __user *ubuf, size_t cnt,
loff_t *ppos)
{
- struct ftrace_event_call *call = filp->private_data;
+ struct ftrace_event_call *call;
struct trace_seq *s;
- int r;
+ int r = -ENODEV;
if (*ppos)
return 0;
s = kmalloc(sizeof(*s), GFP_KERNEL);
+
if (!s)
return -ENOMEM;
trace_seq_init(s);
- print_event_filter(call, s);
- r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
+ mutex_lock(&event_mutex);
+ call = event_file_data(filp);
+ if (call)
+ print_event_filter(call, s);
+ mutex_unlock(&event_mutex);
+
+ if (call)
+ r = simple_read_from_buffer(ubuf, cnt, ppos, s->buffer, s->len);
kfree(s);
@@ -986,9 +1021,9 @@
event_filter_write(struct file *filp, const char __user *ubuf, size_t cnt,
loff_t *ppos)
{
- struct ftrace_event_call *call = filp->private_data;
+ struct ftrace_event_call *call;
char *buf;
- int err;
+ int err = -ENODEV;
if (cnt >= PAGE_SIZE)
return -EINVAL;
@@ -1003,7 +1038,12 @@
}
buf[cnt] = '\0';
- err = apply_event_filter(call, buf);
+ mutex_lock(&event_mutex);
+ call = event_file_data(filp);
+ if (call)
+ err = apply_event_filter(call, buf);
+ mutex_unlock(&event_mutex);
+
free_page((unsigned long) buf);
if (err < 0)
return err;
@@ -1225,10 +1265,9 @@
};
static const struct file_operations ftrace_enable_fops = {
- .open = tracing_open_generic_file,
+ .open = tracing_open_generic,
.read = event_enable_read,
.write = event_enable_write,
- .release = tracing_release_generic_file,
.llseek = default_llseek,
};
@@ -1240,7 +1279,6 @@
};
static const struct file_operations ftrace_event_id_fops = {
- .open = tracing_open_generic,
.read = event_id_read,
.llseek = default_llseek,
};
@@ -1488,8 +1526,8 @@
#ifdef CONFIG_PERF_EVENTS
if (call->event.type && call->class->reg)
- trace_create_file("id", 0444, file->dir, call,
- id);
+ trace_create_file("id", 0444, file->dir,
+ (void *)(long)call->event.type, id);
#endif
/*
@@ -1514,33 +1552,16 @@
return 0;
}
-static void remove_subsystem(struct ftrace_subsystem_dir *dir)
-{
- if (!dir)
- return;
-
- if (!--dir->nr_events) {
- debugfs_remove_recursive(dir->entry);
- list_del(&dir->list);
- __put_system_dir(dir);
- }
-}
-
static void remove_event_from_tracers(struct ftrace_event_call *call)
{
struct ftrace_event_file *file;
struct trace_array *tr;
do_for_each_event_file_safe(tr, file) {
-
if (file->event_call != call)
continue;
- list_del(&file->list);
- debugfs_remove_recursive(file->dir);
- remove_subsystem(file->system);
- kmem_cache_free(file_cachep, file);
-
+ remove_event_file_dir(file);
/*
* The do_for_each_event_file_safe() is
* a double loop. After finding the call for this
@@ -1692,16 +1713,53 @@
destroy_preds(call);
}
-/* Remove an event_call */
-void trace_remove_event_call(struct ftrace_event_call *call)
+static int probe_remove_event_call(struct ftrace_event_call *call)
{
+ struct trace_array *tr;
+ struct ftrace_event_file *file;
+
+#ifdef CONFIG_PERF_EVENTS
+ if (call->perf_refcount)
+ return -EBUSY;
+#endif
+ do_for_each_event_file(tr, file) {
+ if (file->event_call != call)
+ continue;
+ /*
+ * We can't rely on ftrace_event_enable_disable(enable => 0)
+ * we are going to do, FTRACE_EVENT_FL_SOFT_MODE can suppress
+ * TRACE_REG_UNREGISTER.
+ */
+ if (file->flags & FTRACE_EVENT_FL_ENABLED)
+ return -EBUSY;
+ /*
+ * The do_for_each_event_file_safe() is
+ * a double loop. After finding the call for this
+ * trace_array, we use break to jump to the next
+ * trace_array.
+ */
+ break;
+ } while_for_each_event_file();
+
+ __trace_remove_event_call(call);
+
+ return 0;
+}
+
+/* Remove an event_call */
+int trace_remove_event_call(struct ftrace_event_call *call)
+{
+ int ret;
+
mutex_lock(&trace_types_lock);
mutex_lock(&event_mutex);
down_write(&trace_event_sem);
- __trace_remove_event_call(call);
+ ret = probe_remove_event_call(call);
up_write(&trace_event_sem);
mutex_unlock(&event_mutex);
mutex_unlock(&trace_types_lock);
+
+ return ret;
}
#define for_each_event(event, start, end) \
@@ -2270,12 +2328,8 @@
{
struct ftrace_event_file *file, *next;
- list_for_each_entry_safe(file, next, &tr->events, list) {
- list_del(&file->list);
- debugfs_remove_recursive(file->dir);
- remove_subsystem(file->system);
- kmem_cache_free(file_cachep, file);
- }
+ list_for_each_entry_safe(file, next, &tr->events, list)
+ remove_event_file_dir(file);
}
static void
diff --git a/kernel/trace/trace_events_filter.c b/kernel/trace/trace_events_filter.c
index 0c7b75a..97daa8c 100644
--- a/kernel/trace/trace_events_filter.c
+++ b/kernel/trace/trace_events_filter.c
@@ -637,17 +637,15 @@
free_page((unsigned long) buf);
}
+/* caller must hold event_mutex */
void print_event_filter(struct ftrace_event_call *call, struct trace_seq *s)
{
- struct event_filter *filter;
+ struct event_filter *filter = call->filter;
- mutex_lock(&event_mutex);
- filter = call->filter;
if (filter && filter->filter_string)
trace_seq_printf(s, "%s\n", filter->filter_string);
else
trace_seq_puts(s, "none\n");
- mutex_unlock(&event_mutex);
}
void print_subsystem_event_filter(struct event_subsystem *system,
@@ -1841,23 +1839,22 @@
return err;
}
+/* caller must hold event_mutex */
int apply_event_filter(struct ftrace_event_call *call, char *filter_string)
{
struct event_filter *filter;
- int err = 0;
-
- mutex_lock(&event_mutex);
+ int err;
if (!strcmp(strstrip(filter_string), "0")) {
filter_disable(call);
filter = call->filter;
if (!filter)
- goto out_unlock;
+ return 0;
RCU_INIT_POINTER(call->filter, NULL);
/* Make sure the filter is not being used */
synchronize_sched();
__free_filter(filter);
- goto out_unlock;
+ return 0;
}
err = create_filter(call, filter_string, true, &filter);
@@ -1884,8 +1881,6 @@
__free_filter(tmp);
}
}
-out_unlock:
- mutex_unlock(&event_mutex);
return err;
}
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index 3811487..243f683 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -95,7 +95,7 @@
}
static int register_probe_event(struct trace_probe *tp);
-static void unregister_probe_event(struct trace_probe *tp);
+static int unregister_probe_event(struct trace_probe *tp);
static DEFINE_MUTEX(probe_lock);
static LIST_HEAD(probe_list);
@@ -351,9 +351,12 @@
if (trace_probe_is_enabled(tp))
return -EBUSY;
+ /* Will fail if probe is being used by ftrace or perf */
+ if (unregister_probe_event(tp))
+ return -EBUSY;
+
__unregister_trace_probe(tp);
list_del(&tp->list);
- unregister_probe_event(tp);
return 0;
}
@@ -632,7 +635,9 @@
/* TODO: Use batch unregistration */
while (!list_empty(&probe_list)) {
tp = list_entry(probe_list.next, struct trace_probe, list);
- unregister_trace_probe(tp);
+ ret = unregister_trace_probe(tp);
+ if (ret)
+ goto end;
free_trace_probe(tp);
}
@@ -1247,11 +1252,15 @@
return ret;
}
-static void unregister_probe_event(struct trace_probe *tp)
+static int unregister_probe_event(struct trace_probe *tp)
{
+ int ret;
+
/* tp->event is unregistered in trace_remove_event_call() */
- trace_remove_event_call(&tp->call);
- kfree(tp->call.print_fmt);
+ ret = trace_remove_event_call(&tp->call);
+ if (!ret)
+ kfree(tp->call.print_fmt);
+ return ret;
}
/* Make a debugfs interface for controlling probe points */
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index a23d2d71..272261b 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -70,7 +70,7 @@
(sizeof(struct probe_arg) * (n)))
static int register_uprobe_event(struct trace_uprobe *tu);
-static void unregister_uprobe_event(struct trace_uprobe *tu);
+static int unregister_uprobe_event(struct trace_uprobe *tu);
static DEFINE_MUTEX(uprobe_lock);
static LIST_HEAD(uprobe_list);
@@ -164,11 +164,17 @@
}
/* Unregister a trace_uprobe and probe_event: call with locking uprobe_lock */
-static void unregister_trace_uprobe(struct trace_uprobe *tu)
+static int unregister_trace_uprobe(struct trace_uprobe *tu)
{
+ int ret;
+
+ ret = unregister_uprobe_event(tu);
+ if (ret)
+ return ret;
+
list_del(&tu->list);
- unregister_uprobe_event(tu);
free_trace_uprobe(tu);
+ return 0;
}
/* Register a trace_uprobe and probe_event */
@@ -181,9 +187,12 @@
/* register as an event */
old_tp = find_probe_event(tu->call.name, tu->call.class->system);
- if (old_tp)
+ if (old_tp) {
/* delete old event */
- unregister_trace_uprobe(old_tp);
+ ret = unregister_trace_uprobe(old_tp);
+ if (ret)
+ goto end;
+ }
ret = register_uprobe_event(tu);
if (ret) {
@@ -256,6 +265,8 @@
group = UPROBE_EVENT_SYSTEM;
if (is_delete) {
+ int ret;
+
if (!event) {
pr_info("Delete command needs an event name.\n");
return -EINVAL;
@@ -269,9 +280,9 @@
return -ENOENT;
}
/* delete an event */
- unregister_trace_uprobe(tu);
+ ret = unregister_trace_uprobe(tu);
mutex_unlock(&uprobe_lock);
- return 0;
+ return ret;
}
if (argc < 2) {
@@ -408,16 +419,20 @@
return ret;
}
-static void cleanup_all_probes(void)
+static int cleanup_all_probes(void)
{
struct trace_uprobe *tu;
+ int ret = 0;
mutex_lock(&uprobe_lock);
while (!list_empty(&uprobe_list)) {
tu = list_entry(uprobe_list.next, struct trace_uprobe, list);
- unregister_trace_uprobe(tu);
+ ret = unregister_trace_uprobe(tu);
+ if (ret)
+ break;
}
mutex_unlock(&uprobe_lock);
+ return ret;
}
/* Probes listing interfaces */
@@ -462,8 +477,13 @@
static int probes_open(struct inode *inode, struct file *file)
{
- if ((file->f_mode & FMODE_WRITE) && (file->f_flags & O_TRUNC))
- cleanup_all_probes();
+ int ret;
+
+ if ((file->f_mode & FMODE_WRITE) && (file->f_flags & O_TRUNC)) {
+ ret = cleanup_all_probes();
+ if (ret)
+ return ret;
+ }
return seq_open(file, &probes_seq_op);
}
@@ -968,12 +988,17 @@
return ret;
}
-static void unregister_uprobe_event(struct trace_uprobe *tu)
+static int unregister_uprobe_event(struct trace_uprobe *tu)
{
+ int ret;
+
/* tu->event is unregistered in trace_remove_event_call() */
- trace_remove_event_call(&tu->call);
+ ret = trace_remove_event_call(&tu->call);
+ if (ret)
+ return ret;
kfree(tu->call.print_fmt);
tu->call.print_fmt = NULL;
+ return 0;
}
/* Make a trace interface for controling probe points */
diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c
index d8c30db..9064b91 100644
--- a/kernel/user_namespace.c
+++ b/kernel/user_namespace.c
@@ -62,6 +62,9 @@
kgid_t group = new->egid;
int ret;
+ if (parent_ns->level > 32)
+ return -EUSERS;
+
/*
* Verify that we can not violate the policy of which files
* may be accessed that is specified by the root directory,
@@ -92,6 +95,7 @@
atomic_set(&ns->count, 1);
/* Leave the new->user_ns reference with the new user namespace. */
ns->parent = parent_ns;
+ ns->level = parent_ns->level + 1;
ns->owner = owner;
ns->group = group;
@@ -105,16 +109,21 @@
int unshare_userns(unsigned long unshare_flags, struct cred **new_cred)
{
struct cred *cred;
+ int err = -ENOMEM;
if (!(unshare_flags & CLONE_NEWUSER))
return 0;
cred = prepare_creds();
- if (!cred)
- return -ENOMEM;
+ if (cred) {
+ err = create_user_ns(cred);
+ if (err)
+ put_cred(cred);
+ else
+ *new_cred = cred;
+ }
- *new_cred = cred;
- return create_user_ns(cred);
+ return err;
}
void free_user_ns(struct user_namespace *ns)
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 0b72e81..7f5d4be 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2817,6 +2817,19 @@
return false;
}
+static bool __flush_work(struct work_struct *work)
+{
+ struct wq_barrier barr;
+
+ if (start_flush_work(work, &barr)) {
+ wait_for_completion(&barr.done);
+ destroy_work_on_stack(&barr.work);
+ return true;
+ } else {
+ return false;
+ }
+}
+
/**
* flush_work - wait for a work to finish executing the last queueing instance
* @work: the work to flush
@@ -2830,18 +2843,10 @@
*/
bool flush_work(struct work_struct *work)
{
- struct wq_barrier barr;
-
lock_map_acquire(&work->lockdep_map);
lock_map_release(&work->lockdep_map);
- if (start_flush_work(work, &barr)) {
- wait_for_completion(&barr.done);
- destroy_work_on_stack(&barr.work);
- return true;
- } else {
- return false;
- }
+ return __flush_work(work);
}
EXPORT_SYMBOL_GPL(flush_work);
@@ -3411,6 +3416,12 @@
{
to->nice = from->nice;
cpumask_copy(to->cpumask, from->cpumask);
+ /*
+ * Unlike hash and equality test, this function doesn't ignore
+ * ->no_numa as it is used for both pool and wq attrs. Instead,
+ * get_unbound_pool() explicitly clears ->no_numa after copying.
+ */
+ to->no_numa = from->no_numa;
}
/* hash value of the content of @attr */
@@ -3578,6 +3589,12 @@
lockdep_set_subclass(&pool->lock, 1); /* see put_pwq() */
copy_workqueue_attrs(pool->attrs, attrs);
+ /*
+ * no_numa isn't a worker_pool attribute, always clear it. See
+ * 'struct workqueue_attrs' comments for detail.
+ */
+ pool->attrs->no_numa = false;
+
/* if cpumask is contained inside a NUMA node, we belong to that node */
if (wq_numa_enabled) {
for_each_node(node) {
@@ -4756,7 +4773,14 @@
INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn);
schedule_work_on(cpu, &wfc.work);
- flush_work(&wfc.work);
+
+ /*
+ * The work item is on-stack and can't lead to deadlock through
+ * flushing. Use __flush_work() to avoid spurious lockdep warnings
+ * when work_on_cpu()s are nested.
+ */
+ __flush_work(&wfc.work);
+
return wfc.ret;
}
EXPORT_SYMBOL_GPL(work_on_cpu);
diff --git a/mm/slub.c b/mm/slub.c
index 2b02d66..e3ba1f2 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -1968,9 +1968,6 @@
int pages;
int pobjects;
- if (!s->cpu_partial)
- return;
-
do {
pages = 0;
pobjects = 0;
diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c
index 74f6a70..ecbc4e3 100644
--- a/net/sunrpc/clnt.c
+++ b/net/sunrpc/clnt.c
@@ -1660,6 +1660,10 @@
task->tk_action = call_connect_status;
if (task->tk_status < 0)
return;
+ if (task->tk_flags & RPC_TASK_NOCONNECT) {
+ rpc_exit(task, -ENOTCONN);
+ return;
+ }
xprt_connect(task);
}
}
diff --git a/net/sunrpc/netns.h b/net/sunrpc/netns.h
index 74d948f..779742c 100644
--- a/net/sunrpc/netns.h
+++ b/net/sunrpc/netns.h
@@ -23,6 +23,7 @@
struct rpc_clnt *rpcb_local_clnt4;
spinlock_t rpcb_clnt_lock;
unsigned int rpcb_users;
+ unsigned int rpcb_is_af_local : 1;
struct mutex gssp_lock;
wait_queue_head_t gssp_wq;
diff --git a/net/sunrpc/rpcb_clnt.c b/net/sunrpc/rpcb_clnt.c
index 3df764d..1891a10 100644
--- a/net/sunrpc/rpcb_clnt.c
+++ b/net/sunrpc/rpcb_clnt.c
@@ -204,13 +204,15 @@
}
static void rpcb_set_local(struct net *net, struct rpc_clnt *clnt,
- struct rpc_clnt *clnt4)
+ struct rpc_clnt *clnt4,
+ bool is_af_local)
{
struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
/* Protected by rpcb_create_local_mutex */
sn->rpcb_local_clnt = clnt;
sn->rpcb_local_clnt4 = clnt4;
+ sn->rpcb_is_af_local = is_af_local ? 1 : 0;
smp_wmb();
sn->rpcb_users = 1;
dprintk("RPC: created new rpcb local clients (rpcb_local_clnt: "
@@ -238,6 +240,14 @@
.program = &rpcb_program,
.version = RPCBVERS_2,
.authflavor = RPC_AUTH_NULL,
+ /*
+ * We turn off the idle timeout to prevent the kernel
+ * from automatically disconnecting the socket.
+ * Otherwise, we'd have to cache the mount namespace
+ * of the caller and somehow pass that to the socket
+ * reconnect code.
+ */
+ .flags = RPC_CLNT_CREATE_NO_IDLE_TIMEOUT,
};
struct rpc_clnt *clnt, *clnt4;
int result = 0;
@@ -263,7 +273,7 @@
clnt4 = NULL;
}
- rpcb_set_local(net, clnt, clnt4);
+ rpcb_set_local(net, clnt, clnt4, true);
out:
return result;
@@ -315,7 +325,7 @@
clnt4 = NULL;
}
- rpcb_set_local(net, clnt, clnt4);
+ rpcb_set_local(net, clnt, clnt4, false);
out:
return result;
@@ -376,13 +386,16 @@
return rpc_create(&args);
}
-static int rpcb_register_call(struct rpc_clnt *clnt, struct rpc_message *msg)
+static int rpcb_register_call(struct sunrpc_net *sn, struct rpc_clnt *clnt, struct rpc_message *msg, bool is_set)
{
- int result, error = 0;
+ int flags = RPC_TASK_NOCONNECT;
+ int error, result = 0;
+ if (is_set || !sn->rpcb_is_af_local)
+ flags = RPC_TASK_SOFTCONN;
msg->rpc_resp = &result;
- error = rpc_call_sync(clnt, msg, RPC_TASK_SOFTCONN);
+ error = rpc_call_sync(clnt, msg, flags);
if (error < 0) {
dprintk("RPC: failed to contact local rpcbind "
"server (errno %d).\n", -error);
@@ -439,16 +452,19 @@
.rpc_argp = &map,
};
struct sunrpc_net *sn = net_generic(net, sunrpc_net_id);
+ bool is_set = false;
dprintk("RPC: %sregistering (%u, %u, %d, %u) with local "
"rpcbind\n", (port ? "" : "un"),
prog, vers, prot, port);
msg.rpc_proc = &rpcb_procedures2[RPCBPROC_UNSET];
- if (port)
+ if (port != 0) {
msg.rpc_proc = &rpcb_procedures2[RPCBPROC_SET];
+ is_set = true;
+ }
- return rpcb_register_call(sn->rpcb_local_clnt, &msg);
+ return rpcb_register_call(sn, sn->rpcb_local_clnt, &msg, is_set);
}
/*
@@ -461,6 +477,7 @@
const struct sockaddr_in *sin = (const struct sockaddr_in *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin->sin_port);
+ bool is_set = false;
int result;
map->r_addr = rpc_sockaddr2uaddr(sap, GFP_KERNEL);
@@ -471,10 +488,12 @@
map->r_addr, map->r_netid);
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
- if (port)
+ if (port != 0) {
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
+ is_set = true;
+ }
- result = rpcb_register_call(sn->rpcb_local_clnt4, msg);
+ result = rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, is_set);
kfree(map->r_addr);
return result;
}
@@ -489,6 +508,7 @@
const struct sockaddr_in6 *sin6 = (const struct sockaddr_in6 *)sap;
struct rpcbind_args *map = msg->rpc_argp;
unsigned short port = ntohs(sin6->sin6_port);
+ bool is_set = false;
int result;
map->r_addr = rpc_sockaddr2uaddr(sap, GFP_KERNEL);
@@ -499,10 +519,12 @@
map->r_addr, map->r_netid);
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
- if (port)
+ if (port != 0) {
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_SET];
+ is_set = true;
+ }
- result = rpcb_register_call(sn->rpcb_local_clnt4, msg);
+ result = rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, is_set);
kfree(map->r_addr);
return result;
}
@@ -519,7 +541,7 @@
map->r_addr = "";
msg->rpc_proc = &rpcb_procedures4[RPCBPROC_UNSET];
- return rpcb_register_call(sn->rpcb_local_clnt4, msg);
+ return rpcb_register_call(sn, sn->rpcb_local_clnt4, msg, false);
}
/**
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 3f7682a..eefbd10 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1998,12 +1998,11 @@
*
* Create or update the port list entry
*/
-static int smk_ipv6_port_check(struct sock *sk, struct sockaddr *address,
+static int smk_ipv6_port_check(struct sock *sk, struct sockaddr_in6 *address,
int act)
{
__be16 *bep;
__be32 *be32p;
- struct sockaddr_in6 *addr6;
struct smk_port_label *spp;
struct socket_smack *ssp = sk->sk_security;
struct smack_known *skp;
@@ -2025,10 +2024,9 @@
/*
* Get the IP address and port from the address.
*/
- addr6 = (struct sockaddr_in6 *)address;
- port = ntohs(addr6->sin6_port);
- bep = (__be16 *)(&addr6->sin6_addr);
- be32p = (__be32 *)(&addr6->sin6_addr);
+ port = ntohs(address->sin6_port);
+ bep = (__be16 *)(&address->sin6_addr);
+ be32p = (__be32 *)(&address->sin6_addr);
/*
* It's remote, so port lookup does no good.
@@ -2060,9 +2058,9 @@
ad.a.u.net->family = sk->sk_family;
ad.a.u.net->dport = port;
if (act == SMK_RECEIVING)
- ad.a.u.net->v6info.saddr = addr6->sin6_addr;
+ ad.a.u.net->v6info.saddr = address->sin6_addr;
else
- ad.a.u.net->v6info.daddr = addr6->sin6_addr;
+ ad.a.u.net->v6info.daddr = address->sin6_addr;
#endif
return smk_access(skp, object, MAY_WRITE, &ad);
}
@@ -2201,7 +2199,8 @@
case PF_INET6:
if (addrlen < sizeof(struct sockaddr_in6))
return -EINVAL;
- rc = smk_ipv6_port_check(sock->sk, sap, SMK_CONNECTING);
+ rc = smk_ipv6_port_check(sock->sk, (struct sockaddr_in6 *)sap,
+ SMK_CONNECTING);
break;
}
return rc;
@@ -3034,7 +3033,7 @@
int size)
{
struct sockaddr_in *sip = (struct sockaddr_in *) msg->msg_name;
- struct sockaddr *sap = (struct sockaddr *) msg->msg_name;
+ struct sockaddr_in6 *sap = (struct sockaddr_in6 *) msg->msg_name;
int rc = 0;
/*
@@ -3121,9 +3120,8 @@
return smack_net_ambient;
}
-static int smk_skb_to_addr_ipv6(struct sk_buff *skb, struct sockaddr *sap)
+static int smk_skb_to_addr_ipv6(struct sk_buff *skb, struct sockaddr_in6 *sip)
{
- struct sockaddr_in6 *sip = (struct sockaddr_in6 *)sap;
u8 nexthdr;
int offset;
int proto = -EINVAL;
@@ -3181,7 +3179,7 @@
struct netlbl_lsm_secattr secattr;
struct socket_smack *ssp = sk->sk_security;
struct smack_known *skp;
- struct sockaddr sadd;
+ struct sockaddr_in6 sadd;
int rc = 0;
struct smk_audit_info ad;
#ifdef CONFIG_AUDIT
diff --git a/sound/usb/6fire/comm.c b/sound/usb/6fire/comm.c
index 9e6e3ff..23452ee 100644
--- a/sound/usb/6fire/comm.c
+++ b/sound/usb/6fire/comm.c
@@ -110,19 +110,37 @@
static int usb6fire_comm_write8(struct comm_runtime *rt, u8 request,
u8 reg, u8 value)
{
- u8 buffer[13]; /* 13: maximum length of message */
+ u8 *buffer;
+ int ret;
+
+ /* 13: maximum length of message */
+ buffer = kmalloc(13, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
usb6fire_comm_init_buffer(buffer, 0x00, request, reg, value, 0x00);
- return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+ ret = usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+
+ kfree(buffer);
+ return ret;
}
static int usb6fire_comm_write16(struct comm_runtime *rt, u8 request,
u8 reg, u8 vl, u8 vh)
{
- u8 buffer[13]; /* 13: maximum length of message */
+ u8 *buffer;
+ int ret;
+
+ /* 13: maximum length of message */
+ buffer = kmalloc(13, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
usb6fire_comm_init_buffer(buffer, 0x00, request, reg, vl, vh);
- return usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+ ret = usb6fire_comm_send_buffer(buffer, rt->chip->dev);
+
+ kfree(buffer);
+ return ret;
}
int usb6fire_comm_init(struct sfire_chip *chip)
@@ -135,6 +153,12 @@
if (!rt)
return -ENOMEM;
+ rt->receiver_buffer = kzalloc(COMM_RECEIVER_BUFSIZE, GFP_KERNEL);
+ if (!rt->receiver_buffer) {
+ kfree(rt);
+ return -ENOMEM;
+ }
+
urb = &rt->receiver;
rt->serial = 1;
rt->chip = chip;
@@ -153,6 +177,7 @@
urb->interval = 1;
ret = usb_submit_urb(urb, GFP_KERNEL);
if (ret < 0) {
+ kfree(rt->receiver_buffer);
kfree(rt);
snd_printk(KERN_ERR PREFIX "cannot create comm data receiver.");
return ret;
@@ -171,6 +196,9 @@
void usb6fire_comm_destroy(struct sfire_chip *chip)
{
- kfree(chip->comm);
+ struct comm_runtime *rt = chip->comm;
+
+ kfree(rt->receiver_buffer);
+ kfree(rt);
chip->comm = NULL;
}
diff --git a/sound/usb/6fire/comm.h b/sound/usb/6fire/comm.h
index 6a0840b..780d5ed 100644
--- a/sound/usb/6fire/comm.h
+++ b/sound/usb/6fire/comm.h
@@ -24,7 +24,7 @@
struct sfire_chip *chip;
struct urb receiver;
- u8 receiver_buffer[COMM_RECEIVER_BUFSIZE];
+ u8 *receiver_buffer;
u8 serial; /* urb serial */
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 7a444b5..659950e 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -591,17 +591,16 @@
ep->stride = frame_bits >> 3;
ep->silence_value = pcm_format == SNDRV_PCM_FORMAT_U8 ? 0x80 : 0;
- /* calculate max. frequency */
- if (ep->maxpacksize) {
+ /* assume max. frequency is 25% higher than nominal */
+ ep->freqmax = ep->freqn + (ep->freqn >> 2);
+ maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
+ >> (16 - ep->datainterval);
+ /* but wMaxPacketSize might reduce this */
+ if (ep->maxpacksize && ep->maxpacksize < maxsize) {
/* whatever fits into a max. size packet */
maxsize = ep->maxpacksize;
ep->freqmax = (maxsize / (frame_bits >> 3))
<< (16 - ep->datainterval);
- } else {
- /* no max. packet size: just take 25% higher than nominal */
- ep->freqmax = ep->freqn + (ep->freqn >> 2);
- maxsize = ((ep->freqmax + 0xffff) * (frame_bits >> 3))
- >> (16 - ep->datainterval);
}
if (ep->fill_max)
