Merge tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are 3 tiny fixes for 3.18-rc4.
One fixes up a long-stading race condition in the driver core for
removing directories in /sys/devices/virtual/ and the other 2 fix up
the wording of a new Kconfig option that was added in 3.18-rc1"
* tag 'driver-core-3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP
tiny: reverse logic for DISABLE_DEV_COREDUMP
sysfs: driver core: Fix glue dir race condition by gdp_mutex
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 0ef00be..43404b1 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -7,7 +7,10 @@
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2)
+ - "renesas,thermal-r8a7791" (R-Car M2-W)
+ - "renesas,thermal-r8a7792" (R-Car V2H)
+ - "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4c81a86..479f332 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -3621,7 +3621,7 @@
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
- scanned for Logical Units (default 5).
+ scanned for Logical Units (default 1).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or
diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt
index eeb11a2..e5a940e 100644
--- a/Documentation/video4linux/vivid.txt
+++ b/Documentation/video4linux/vivid.txt
@@ -221,12 +221,11 @@
key, not quality.
multiplanar: select whether each device instance supports multi-planar formats,
- and thus the V4L2 multi-planar API. By default the first device instance
- is single-planar, the second multi-planar, and it keeps alternating.
+ and thus the V4L2 multi-planar API. By default device instances are
+ single-planar.
This module option can override that for each instance. Values are:
- 0: use alternating single and multi-planar devices.
1: this is a single-planar instance.
2: this is a multi-planar instance.
@@ -975,9 +974,8 @@
0 otherwise.
The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
If the driver instance is using the multiplanar formats/API, then the first
single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
@@ -1021,7 +1019,7 @@
to see the blended framebuffer overlay that's being written to by the second
instance. This setup would require the following commands:
- $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+ $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
$ v4l2-ctl -d1 --find-fb
/dev/fb1 is the framebuffer associated with base address 0x12800000
$ sudo v4l2-ctl -d2 --set-fbuf fb=1
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c64271..a0d386e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1543,6 +1543,7 @@
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
+R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
@@ -7179,6 +7180,7 @@
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
@@ -8483,7 +8485,6 @@
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported
@@ -8493,7 +8494,6 @@
TI DAVINCI SERIES MEDIA DRIVER
M: Lad, Prabhakar <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
@@ -9703,11 +9703,6 @@
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
-USB/IP DRIVERS
-L: linux-usb@vger.kernel.org
-S: Orphan
-F: drivers/staging/usbip/
-
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 03dc4c1..d8f6a2e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -1187,7 +1187,7 @@
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
- default 0xf2100000 if DEBUG_PXA_UART1
+ default 0xf6200000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f1dc7fc..3487046 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -235,6 +235,7 @@
CONFIG_SPI_XILINX=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
@@ -411,6 +412,7 @@
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 16e719c..b3f8667 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -86,7 +86,6 @@
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
@@ -112,6 +111,7 @@
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
@@ -317,7 +317,7 @@
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig
index d7a5855..a2956c3 100644
--- a/arch/arm/configs/socfpga_defconfig
+++ b/arch/arm/configs/socfpga_defconfig
@@ -1,5 +1,6 @@
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -11,23 +12,17 @@
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_HOTPLUG=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SOCFPGA=y
-CONFIG_MACH_SOCFPGA_CYCLONE5=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
@@ -41,38 +36,30 @@
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_GW=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SRAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
-CONFIG_MICREL_PHY=y
-# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
-CONFIG_INPUT_EVDEV=y
CONFIG_DWMAC_SOCFPGA=y
-CONFIG_PPS=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_GARP=y
-CONFIG_IPV6=y
+CONFIG_MICREL_PHY=y
+CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
@@ -81,45 +68,43 @@
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
-# CONFIG_RTC_HCTOSYS is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_FHANDLE=y
+CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
-CONFIG_I2C=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_PM=y
-CONFIG_SUSPEND=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PLATFORM=y
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 559c69a..7d11979 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -76,7 +76,7 @@
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
- __raw_writeb(value, addr);
+ __raw_writeb(value, p);
return;
}
@@ -141,7 +141,7 @@
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
- return __raw_readb(addr);
+ return __raw_readb(p);
n = addr % 4;
byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index d22c30d..8c58b71 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -917,6 +917,10 @@
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+ WARN(!of_have_populated_dt(),
+ "legacy booting deprecated, please update to boot with .dts\n");
+
return 0;
}
omap_late_initcall_sync(omap_device_late_init);
diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h
index bbf9df3..d28fe29 100644
--- a/arch/arm/mach-pxa/include/mach/addr-map.h
+++ b/arch/arm/mach-pxa/include/mach/addr-map.h
@@ -39,6 +39,11 @@
#define DMEMC_SIZE 0x00100000
/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
+/*
* Internal Memory Controller (PXA27x and later)
*/
#define IMEMC_PHYS 0x58000000
diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h
index 4ef7a54..75e75d7 100644
--- a/arch/m68k/include/asm/unistd.h
+++ b/arch/m68k/include/asm/unistd.h
@@ -4,7 +4,7 @@
#include <uapi/asm/unistd.h>
-#define NR_syscalls 354
+#define NR_syscalls 355
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h
index b419c6b..2c1bec9 100644
--- a/arch/m68k/include/uapi/asm/unistd.h
+++ b/arch/m68k/include/uapi/asm/unistd.h
@@ -359,5 +359,6 @@
#define __NR_renameat2 351
#define __NR_getrandom 352
#define __NR_memfd_create 353
+#define __NR_bpf 354
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S
index 05b46c2..2ca219e 100644
--- a/arch/m68k/kernel/syscalltable.S
+++ b/arch/m68k/kernel/syscalltable.S
@@ -374,4 +374,5 @@
.long sys_renameat2
.long sys_getrandom
.long sys_memfd_create
+ .long sys_bpf
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 23cb948..5807647 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -93,6 +93,15 @@
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+#
+# pass -msoft-float to GAS if it supports it. However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+ cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
+
cflags-y += -ffreestanding
#
diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c
index 7417340..2bc4aa9 100644
--- a/arch/mips/cavium-octeon/octeon-irq.c
+++ b/arch/mips/cavium-octeon/octeon-irq.c
@@ -809,6 +809,7 @@
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
@@ -823,6 +824,7 @@
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h
index e38c281..cdac7b3 100644
--- a/arch/mips/include/asm/asmmacro-32.h
+++ b/arch/mips/include/asm/asmmacro-32.h
@@ -13,6 +13,8 @@
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
@@ -47,9 +49,12 @@
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_restore_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
@@ -84,6 +89,7 @@
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
+ .set pop
.endm
.macro cpu_save_nonscratch thread
diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h
index cd9a98b..6caf876 100644
--- a/arch/mips/include/asm/asmmacro.h
+++ b/arch/mips/include/asm/asmmacro.h
@@ -57,6 +57,8 @@
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
@@ -75,11 +77,13 @@
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
@@ -110,6 +114,8 @@
.endm
.macro fpu_restore_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
@@ -133,6 +139,7 @@
.macro fpu_restore_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
@@ -277,6 +284,7 @@
.macro cfcmsa rd, cs
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
@@ -286,6 +294,7 @@
.macro ctcmsa cd, rs
.set push
.set noat
+ SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
@@ -294,6 +303,7 @@
.macro ld_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
@@ -302,6 +312,7 @@
.macro st_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
@@ -310,6 +321,7 @@
.macro copy_u_w rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@@ -320,6 +332,7 @@
.macro copy_u_d rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
@@ -330,6 +343,7 @@
.macro insert_w wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
@@ -339,6 +353,7 @@
.macro insert_d wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
@@ -381,6 +396,7 @@
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
+ SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
@@ -389,6 +405,7 @@
.macro msa_restore_all thread
.set push
.set noat
+ SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
@@ -441,6 +458,7 @@
.macro msa_init_all_upper
.set push
.set noat
+ SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop
diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h
index 429481f..f184ba0 100644
--- a/arch/mips/include/asm/fpregdef.h
+++ b/arch/mips/include/asm/fpregdef.h
@@ -14,6 +14,20 @@
#include <asm/sgidefs.h>
+/*
+ * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
+ * hardfloat and softfloat object files. The kernel build uses soft-float by
+ * default, so we also need to pass -msoft-float along to GAS if it supports it.
+ * But this in turn causes assembler errors in files which access hardfloat
+ * registers. We detect if GAS supports "-msoft-float" in the Makefile and
+ * explicitly put ".set hardfloat" where floating point registers are touched.
+ */
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define SET_HARDFLOAT .set hardfloat
+#else
+#define SET_HARDFLOAT
+#endif
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h
index 4d0aeda..dd56241 100644
--- a/arch/mips/include/asm/fpu.h
+++ b/arch/mips/include/asm/fpu.h
@@ -145,8 +145,8 @@
if (is_msa_enabled()) {
if (save) {
save_msa(current);
- asm volatile("cfc1 %0, $31"
- : "=r"(current->thread.fpu.fcr31));
+ current->thread.fpu.fcr31 =
+ read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index cf3b580..b46cd22 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -1324,7 +1324,7 @@
/*
* Macros to access the floating point coprocessor control registers
*/
-#define read_32bit_cp1_register(source) \
+#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
@@ -1334,12 +1334,21 @@
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
+ " "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, .set hardfloat)
+#else
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, )
+#endif
+
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \
diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h
index fdb4923..9dc5856 100644
--- a/arch/mips/include/uapi/asm/unistd.h
+++ b/arch/mips/include/uapi/asm/unistd.h
@@ -375,16 +375,17 @@
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
+#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 354
+#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 354
+#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
@@ -707,16 +708,17 @@
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
+#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 314
+#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 314
+#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
@@ -1043,15 +1045,16 @@
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
+#define __NR_memfd_create (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 318
+#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 318
+#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index 7b2df22..4d7d99d 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -144,7 +144,7 @@
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
@@ -562,11 +562,7 @@
case cop1_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S
index ac35e12..a5e26dd 100644
--- a/arch/mips/kernel/genex.S
+++ b/arch/mips/kernel/genex.S
@@ -358,6 +358,7 @@
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
+ SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S
index f31063d..5ce3b74 100644
--- a/arch/mips/kernel/r2300_fpu.S
+++ b/arch/mips/kernel/r2300_fpu.S
@@ -28,6 +28,8 @@
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
@@ -65,6 +67,7 @@
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
+ .set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
@@ -80,6 +83,8 @@
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
@@ -116,6 +121,7 @@
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
+ .set pop
END(_restore_fp_context)
.set reorder
diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S
index 20b7b04..435ea65 100644
--- a/arch/mips/kernel/r2300_switch.S
+++ b/arch/mips/kernel/r2300_switch.S
@@ -120,6 +120,9 @@
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@@ -165,3 +168,5 @@
mtc1 t0, $f31
jr ra
END(_init_fpu)
+
+ .set pop
diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S
index 8352523..6c160c6 100644
--- a/arch/mips/kernel/r4k_fpu.S
+++ b/arch/mips/kernel/r4k_fpu.S
@@ -19,8 +19,12 @@
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
.macro EX insn, reg, src
.set push
+ SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
@@ -33,12 +37,17 @@
.set arch=r4000
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
+ .set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
@@ -64,6 +73,8 @@
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
@@ -84,11 +95,14 @@
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
+ .set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
@@ -134,6 +148,7 @@
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
+ .set pop
jr ra
li v0, 0 # success
@@ -150,8 +165,10 @@
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
@@ -175,6 +192,8 @@
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
@@ -192,6 +211,7 @@
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
+ .set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
@@ -199,6 +219,8 @@
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
+ .set push
+ SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
@@ -242,6 +264,7 @@
ctc1 t1, fcr31
jr ra
li v0, 0 # success
+ .set pop
END(_restore_fp_context32)
#endif
diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S
index 4c4ec18..64591e6 100644
--- a/arch/mips/kernel/r4k_switch.S
+++ b/arch/mips/kernel/r4k_switch.S
@@ -22,6 +22,9 @@
#include <asm/asmmacro.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
@@ -65,8 +68,12 @@
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
+ .set pop /* SET_HARDFLOAT */
+
sw t1, THREAD_FCR31(a0)
b 2f
@@ -161,6 +168,9 @@
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
@@ -232,7 +242,8 @@
#ifdef CONFIG_CPU_MIPS32_R2
.set push
- .set mips64r2
+ .set mips32r2
+ .set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
@@ -291,3 +302,5 @@
#endif
jr ra
END(_init_fpu)
+
+ .set pop /* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S
index da0fbe4..4707738 100644
--- a/arch/mips/kernel/r6000_fpu.S
+++ b/arch/mips/kernel/r6000_fpu.S
@@ -18,6 +18,9 @@
.set noreorder
.set mips2
+ .set push
+ SET_HARDFLOAT
+
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
@@ -85,3 +88,5 @@
1: jr ra
nop
END(_restore_fp_context)
+
+ .set pop /* SET_HARDFLOAT */
diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S
index 744cd10..00cad10 100644
--- a/arch/mips/kernel/scall32-o32.S
+++ b/arch/mips/kernel/scall32-o32.S
@@ -579,3 +579,4 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S
index 002b1bc..5251565 100644
--- a/arch/mips/kernel/scall64-64.S
+++ b/arch/mips/kernel/scall64-64.S
@@ -434,4 +434,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index ca6cbbe..77e7439 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -427,4 +427,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 9e10d11..6f8db9f 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -564,4 +564,5 @@
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index b3b8f0d..d21ec57 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -683,7 +683,8 @@
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
- reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+ if (reg->size != 0)
+ reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
static void __init resource_init(void)
diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c
index 91615c2..1ef365a 100644
--- a/arch/mips/lib/r3k_dump_tlb.c
+++ b/arch/mips/lib/r3k_dump_tlb.c
@@ -34,7 +34,7 @@
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & 0xffffe000) != 0x80000000
+ if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
@@ -43,7 +43,7 @@
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
- (entryhi & 0xffffe000),
+ (entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S
index f3af699..7d12c0d 100644
--- a/arch/mips/lib/strnlen_user.S
+++ b/arch/mips/lib/strnlen_user.S
@@ -40,9 +40,11 @@
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
- PTR_ADDIU v0, 1
+ .set noreorder
bnez t0, 1b
-1: PTR_SUBU v0, a0
+1: PTR_ADDIU v0, 1
+ .set reorder
+ PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)
diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c
index 51a0fde..cac529a 100644
--- a/arch/mips/math-emu/cp1emu.c
+++ b/arch/mips/math-emu/cp1emu.c
@@ -584,11 +584,7 @@
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c
index fa374fe..f7ac3ed 100644
--- a/arch/mips/pci/msi-xlp.c
+++ b/arch/mips/pci/msi-xlp.c
@@ -443,10 +443,8 @@
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0) {
- destroy_irq(xirq);
+ if (ret < 0)
return ret;
- }
write_msi_msg(xirq, &msg);
return 0;
diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h
index a677456..493e72f 100644
--- a/arch/powerpc/include/asm/fadump.h
+++ b/arch/powerpc/include/asm/fadump.h
@@ -70,39 +70,39 @@
#define CPU_UNKNOWN (~((u32)0))
/* Utility macros */
-#define SKIP_TO_NEXT_CPU(reg_entry) \
-({ \
- while (reg_entry->reg_id != REG_ID("CPUEND")) \
- reg_entry++; \
- reg_entry++; \
+#define SKIP_TO_NEXT_CPU(reg_entry) \
+({ \
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \
+ reg_entry++; \
+ reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
- u32 request_flag;
- u16 source_data_type;
- u16 error_flags;
- u64 source_address;
- u64 source_len;
- u64 bytes_dumped;
- u64 destination_address;
+ __be32 request_flag;
+ __be16 source_data_type;
+ __be16 error_flags;
+ __be64 source_address;
+ __be64 source_len;
+ __be64 bytes_dumped;
+ __be64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
- u32 dump_format_version;
- u16 dump_num_sections;
- u16 dump_status_flag;
- u32 offset_first_dump_section;
+ __be32 dump_format_version;
+ __be16 dump_num_sections;
+ __be16 dump_status_flag;
+ __be32 offset_first_dump_section;
/* Fields for disk dump option. */
- u32 dd_block_size;
- u64 dd_block_offset;
- u64 dd_num_blocks;
- u32 dd_offset_disk_path;
+ __be32 dd_block_size;
+ __be64 dd_block_offset;
+ __be64 dd_num_blocks;
+ __be32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
- u32 max_time_auto;
+ __be32 max_time_auto;
};
/*
@@ -174,15 +174,15 @@
/* Register save area header. */
struct fadump_reg_save_area_header {
- u64 magic_number;
- u32 version;
- u32 num_cpu_offset;
+ __be64 magic_number;
+ __be32 version;
+ __be32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
- u64 reg_id;
- u64 reg_value;
+ __be64 reg_id;
+ __be64 reg_value;
};
/* fadump crash info structure */
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index 5bbd1bc..0905c8d 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -659,7 +659,13 @@
3:
#endif
bl save_nvgprs
+ /*
+ * Use a non volatile GPR to save and restore our thread_info flags
+ * across the call to restore_interrupts.
+ */
+ mr r30,r4
bl restore_interrupts
+ mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except
diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c
index 742694c..26d091a 100644
--- a/arch/powerpc/kernel/fadump.c
+++ b/arch/powerpc/kernel/fadump.c
@@ -58,7 +58,7 @@
const __be32 *sections;
int i, num_sections;
int size;
- const int *token;
+ const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
@@ -72,7 +72,7 @@
return 1;
fw_dump.fadump_supported = 1;
- fw_dump.ibm_configure_kernel_dump = *token;
+ fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
@@ -147,11 +147,11 @@
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
- fdm->header.dump_format_version = 0x00000001;
- fdm->header.dump_num_sections = 3;
+ fdm->header.dump_format_version = cpu_to_be32(0x00000001);
+ fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
- (u32)offsetof(struct fadump_mem_struct, cpu_state_data);
+ cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
@@ -167,27 +167,27 @@
/* Kernel dump sections */
/* cpu state data section. */
- fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
- fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
+ fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
- fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
- fdm->cpu_state_data.destination_address = addr;
+ fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
+ fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
- fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
+ fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
- fdm->hpte_region.source_len = fw_dump.hpte_region_size;
- fdm->hpte_region.destination_address = addr;
+ fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
+ fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
- fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
- fdm->rmr_region.source_address = RMA_START;
- fdm->rmr_region.source_len = fw_dump.boot_memory_size;
- fdm->rmr_region.destination_address = addr;
+ fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
+ fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
+ fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
+ fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
@@ -272,7 +272,7 @@
* first kernel.
*/
if (fdm_active)
- fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
+ fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
@@ -314,8 +314,8 @@
(unsigned long)(base >> 20));
fw_dump.fadumphdr_addr =
- fdm_active->rmr_region.destination_address +
- fdm_active->rmr_region.source_len;
+ be64_to_cpu(fdm_active->rmr_region.destination_address) +
+ be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
@@ -472,9 +472,9 @@
{
memset(regs, 0, sizeof(struct pt_regs));
- while (reg_entry->reg_id != REG_ID("CPUEND")) {
- fadump_set_regval(regs, reg_entry->reg_id,
- reg_entry->reg_value);
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
+ fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
+ be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
@@ -603,20 +603,20 @@
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
- addr = fdm->cpu_state_data.destination_address;
+ addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
- if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
+ if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
- pr_debug("Magic Number: %llx\n", reg_header->magic_number);
- pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
+ pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
+ pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
- vaddr += reg_header->num_cpu_offset;
- num_cpus = *((u32 *)(vaddr));
+ vaddr += be32_to_cpu(reg_header->num_cpu_offset);
+ num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
@@ -639,13 +639,13 @@
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
- if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
+ if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
- cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
+ cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
@@ -692,7 +692,7 @@
return -EINVAL;
/* Check if the dump data is valid. */
- if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
+ if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
@@ -828,7 +828,7 @@
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
- return fdm.rmr_region.destination_address + paddr;
+ return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
@@ -902,7 +902,7 @@
* to the specified destination_address. Hence set
* the correct offset.
*/
- phdr->p_offset = fdm.rmr_region.destination_address;
+ phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
}
phdr->p_paddr = mbase;
@@ -951,7 +951,7 @@
fadump_setup_crash_memory_ranges();
- addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
+ addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
@@ -1023,7 +1023,7 @@
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
- fdm_active->cpu_state_data.destination_address);
+ be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
@@ -1063,7 +1063,7 @@
return;
}
- destination_address = fdm_active->cpu_state_data.destination_address;
+ destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
@@ -1183,31 +1183,31 @@
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->cpu_state_data.destination_address,
- fdm_ptr->cpu_state_data.destination_address +
- fdm_ptr->cpu_state_data.source_len - 1,
- fdm_ptr->cpu_state_data.source_len,
- fdm_ptr->cpu_state_data.bytes_dumped);
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
+ be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->hpte_region.destination_address,
- fdm_ptr->hpte_region.destination_address +
- fdm_ptr->hpte_region.source_len - 1,
- fdm_ptr->hpte_region.source_len,
- fdm_ptr->hpte_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address),
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
+ be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->hpte_region.source_len),
+ be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->rmr_region.destination_address,
- fdm_ptr->rmr_region.destination_address +
- fdm_ptr->rmr_region.source_len - 1,
- fdm_ptr->rmr_region.source_len,
- fdm_ptr->rmr_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address),
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
+ be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->rmr_region.source_len),
+ be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
- fdm_ptr->cpu_state_data.destination_address))
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
@@ -1215,10 +1215,10 @@
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address - 1,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index cad68ff..415a51b 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -103,7 +103,7 @@
/*
* Check for command-line options that affect what MMU_init will do.
*/
-void MMU_setup(void)
+void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {
diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c
index ad4b31d..e4169d6 100644
--- a/arch/powerpc/platforms/powernv/opal-lpc.c
+++ b/arch/powerpc/platforms/powernv/opal-lpc.c
@@ -216,14 +216,54 @@
&data, len);
if (rc)
return -ENXIO;
+
+ /*
+ * Now there is some trickery with the data returned by OPAL
+ * as it's the desired data right justified in a 32-bit BE
+ * word.
+ *
+ * This is a very bad interface and I'm to blame for it :-(
+ *
+ * So we can't just apply a 32-bit swap to what comes from OPAL,
+ * because user space expects the *bytes* to be in their proper
+ * respective positions (ie, LPC position).
+ *
+ * So what we really want to do here is to shift data right
+ * appropriately on a LE kernel.
+ *
+ * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+ * order, we have in memory written to by OPAL at the "data"
+ * pointer:
+ *
+ * Bytes: OPAL "data" LE "data"
+ * 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0
+ * 16-bit: B0 B1 0000B0B1 B1B00000
+ * 8-bit: B0 000000B0 B0000000
+ *
+ * So a BE kernel will have the leftmost of the above in the MSB
+ * and rightmost in the LSB and can just then "cast" the u32 "data"
+ * down to the appropriate quantity and write it.
+ *
+ * However, an LE kernel can't. It doesn't need to swap because a
+ * load from data followed by a store to user are going to preserve
+ * the byte ordering which is the wire byte order which is what the
+ * user wants, but in order to "crop" to the right size, we need to
+ * shift right first.
+ */
switch(len) {
case 4:
rc = __put_user((u32)data, (u32 __user *)ubuf);
break;
case 2:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 16;
+#endif
rc = __put_user((u16)data, (u16 __user *)ubuf);
break;
default:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 24;
+#endif
rc = __put_user((u8)data, (u8 __user *)ubuf);
break;
}
@@ -263,12 +303,31 @@
else if (todo > 1 && (pos & 1) == 0)
len = 2;
}
+
+ /*
+ * Similarly to the read case, we have some trickery here but
+ * it's different to handle. We need to pass the value to OPAL in
+ * a register whose layout depends on the access size. We want
+ * to reproduce the memory layout of the user, however we aren't
+ * doing a load from user and a store to another memory location
+ * which would achieve that. Here we pass the value to OPAL via
+ * a register which is expected to contain the "BE" interpretation
+ * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+ * in the MSB. So here we *do* need to byteswap on LE.
+ *
+ * User bytes: LE "data" OPAL "data"
+ * 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3
+ * 16-bit: B0 B1 0000B1B0 0000B0B1
+ * 8-bit: B0 000000B0 000000B0
+ */
switch(len) {
case 4:
rc = __get_user(data, (u32 __user *)ubuf);
+ data = cpu_to_be32(data);
break;
case 2:
rc = __get_user(data, (u16 __user *)ubuf);
+ data = cpu_to_be16(data);
break;
default:
rc = __get_user(data, (u8 __user *)ubuf);
diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c
index 6ad83bd..c22bb1b 100644
--- a/arch/powerpc/platforms/pseries/dlpar.c
+++ b/arch/powerpc/platforms/pseries/dlpar.c
@@ -382,7 +382,7 @@
BUG_ON(get_cpu_current_state(cpu)
!= CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_up(cpu);
+ rc = device_online(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
@@ -467,7 +467,7 @@
if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_down(cpu);
+ rc = device_offline(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c
index 8c509d5..f6880d2 100644
--- a/arch/powerpc/platforms/pseries/lpar.c
+++ b/arch/powerpc/platforms/pseries/lpar.c
@@ -43,6 +43,7 @@
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
+#include <asm/fadump.h>
#include "pseries.h"
@@ -247,8 +248,17 @@
}
#ifdef __LITTLE_ENDIAN__
- /* Reset exceptions to big endian */
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ /*
+ * Reset exceptions to big endian.
+ *
+ * FIXME this is a hack for kexec, we need to reset the exception
+ * endian before starting the new kernel and this is a convenient place
+ * to do it.
+ *
+ * This is also called on boot when a fadump happens. In that case we
+ * must not change the exception endian mode.
+ */
+ if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
long rc;
rc = pseries_big_endian_exceptions();
diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig
index 9d94fdd..9432d0f 100644
--- a/arch/s390/configs/default_defconfig
+++ b/arch/s390/configs/default_defconfig
@@ -35,7 +35,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -245,6 +244,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -252,11 +252,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -270,6 +265,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -286,9 +282,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -374,14 +367,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -427,7 +419,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -481,14 +472,14 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -574,7 +565,6 @@
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
@@ -600,8 +590,13 @@
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
@@ -609,7 +604,10 @@
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_STRING_HELPERS=y
+CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
+CONFIG_TEST_BPF=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
@@ -673,12 +671,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig
index 90f514b..219dca6 100644
--- a/arch/s390/configs/gcov_defconfig
+++ b/arch/s390/configs/gcov_defconfig
@@ -35,7 +35,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -243,6 +242,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -250,11 +250,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -268,6 +263,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -284,9 +280,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -371,14 +364,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -424,7 +416,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -478,13 +469,13 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -626,12 +617,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig
index 13559d3..822c2f2 100644
--- a/arch/s390/configs/performance_defconfig
+++ b/arch/s390/configs/performance_defconfig
@@ -33,7 +33,6 @@
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
@@ -241,6 +240,7 @@
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
@@ -248,11 +248,6 @@
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
@@ -266,6 +261,7 @@
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
@@ -282,9 +278,6 @@
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
@@ -369,14 +362,13 @@
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
@@ -422,7 +414,6 @@
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
@@ -476,13 +467,13 @@
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
@@ -550,8 +541,11 @@
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
@@ -618,12 +612,6 @@
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index e376789..9d63051 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -22,8 +22,8 @@
CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
-# CONFIG_IUCV is not set
CONFIG_NET=y
+# CONFIG_IUCV is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -36,9 +36,9 @@
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_ENCLOSURE=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_ZFCP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
@@ -75,12 +75,6 @@
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
# CONFIG_STRICT_DEVMEM is not set
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index fab35a8..785c5f2 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -92,10 +92,10 @@
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_NETDEVICES=y
@@ -164,14 +164,13 @@
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 51d14fe5..ca1cabb 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -121,6 +121,8 @@
{
struct ftrace_graph_ent trace;
+ if (unlikely(ftrace_graph_is_dead()))
+ goto out;
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S
index 48c2206..5eec9af 100644
--- a/arch/s390/kernel/vdso32/clock_gettime.S
+++ b/arch/s390/kernel/vdso32/clock_gettime.S
@@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
chi %r2,__CLOCK_REALTIME_COARSE
@@ -34,8 +35,8 @@
1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
@@ -70,6 +71,7 @@
8: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@@ -96,8 +98,8 @@
11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 11b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
@@ -132,11 +134,13 @@
17: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* Fallback to system call */
19: lhi %r1,__NR_clock_gettime
svc 0
+ ahi %r15,16
br %r14
20: .long 1000000000
diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S
index 60def5f..719de61 100644
--- a/arch/s390/kernel/vdso32/gettimeofday.S
+++ b/arch/s390/kernel/vdso32/gettimeofday.S
@@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,13f-0b(%r5) /* get &_vdso_data */
1: ltr %r3,%r3 /* check if tz is NULL */
@@ -29,30 +30,30 @@
l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
- st %r0,24(%r15)
+ st %r0,0(%r15)
l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
a %r0,__VDSO_TK_MULT(%r5)
-4: al %r0,24(%r15)
+4: al %r0,0(%r15)
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
+5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
srdl %r0,0(%r4) /* >> tk->shift */
- l %r4,24(%r15) /* get tv_sec from stack */
+ l %r4,0(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
jnz 7f
@@ -71,6 +72,7 @@
9: srl %r0,6
st %r0,4(%r2) /* store tv->tv_usec */
10: slr %r2,%r2
+ ahi %r15,16
br %r14
11: .long 1000000000
12: .long 274877907
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 9d9761f..7699e73 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -19,6 +19,7 @@
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME_COARSE
je 4f
@@ -37,10 +38,10 @@
0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r0,__VDSO_WTOM_SEC(%r5)
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_WTOM_NSEC(%r5)
@@ -56,6 +57,7 @@
2: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
@@ -82,9 +84,9 @@
5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@@ -101,6 +103,7 @@
7: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
@@ -134,11 +137,13 @@
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
+ aghi %r15,16
br %r14
/* Fallback to system call */
12: lghi %r1,__NR_clock_gettime
svc 0
+ aghi %r15,16
br %r14
13: .quad 1000000000
diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S
index 7a34499..6ce4670 100644
--- a/arch/s390/kernel/vdso64/gettimeofday.S
+++ b/arch/s390/kernel/vdso64/gettimeofday.S
@@ -19,6 +19,7 @@
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
0: ltgr %r3,%r3 /* check if tz is NULL */
je 1f
@@ -28,8 +29,8 @@
lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
- lg %r1,49(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
@@ -50,6 +51,7 @@
srlg %r0,%r0,6
stg %r0,8(%r2) /* store tv->tv_usec */
4: lghi %r2,0
+ aghi %r15,16
br %r14
5: .quad 1000000000
.long 274877907
diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c
index 416f2a3..7f0089d 100644
--- a/arch/s390/kernel/vtime.c
+++ b/arch/s390/kernel/vtime.c
@@ -66,7 +66,11 @@
clock = S390_lowcore.last_update_clock;
asm volatile(
" stpt %0\n" /* Store current cpu timer value */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+ " stckf %1" /* Store current tod clock value */
+#else
" stck %1" /* Store current tod clock value */
+#endif
: "=m" (S390_lowcore.last_update_timer),
"=m" (S390_lowcore.last_update_clock));
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c
index 0a54c58..27b71a0 100644
--- a/drivers/block/rbd.c
+++ b/drivers/block/rbd.c
@@ -342,7 +342,6 @@
struct list_head rq_queue; /* incoming rq queue */
spinlock_t lock; /* queue, flags, open_count */
- struct workqueue_struct *rq_wq;
struct work_struct rq_work;
struct rbd_image_header header;
@@ -402,6 +401,8 @@
static int rbd_major;
static DEFINE_IDA(rbd_dev_id_ida);
+static struct workqueue_struct *rbd_wq;
+
/*
* Default to false for now, as single-major requires >= 0.75 version of
* userspace rbd utility.
@@ -3452,7 +3453,7 @@
}
if (queued)
- queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
+ queue_work(rbd_wq, &rbd_dev->rq_work);
}
/*
@@ -3532,7 +3533,7 @@
page_count = (u32) calc_pages_for(offset, length);
pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
if (IS_ERR(pages))
- ret = PTR_ERR(pages);
+ return PTR_ERR(pages);
ret = -ENOMEM;
obj_request = rbd_obj_request_create(object_name, offset, length,
@@ -5242,16 +5243,9 @@
set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);
- rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
- rbd_dev->disk->disk_name);
- if (!rbd_dev->rq_wq) {
- ret = -ENOMEM;
- goto err_out_mapping;
- }
-
ret = rbd_bus_add_dev(rbd_dev);
if (ret)
- goto err_out_workqueue;
+ goto err_out_mapping;
/* Everything's ready. Announce the disk to the world. */
@@ -5263,9 +5257,6 @@
return ret;
-err_out_workqueue:
- destroy_workqueue(rbd_dev->rq_wq);
- rbd_dev->rq_wq = NULL;
err_out_mapping:
rbd_dev_mapping_clear(rbd_dev);
err_out_disk:
@@ -5512,7 +5503,6 @@
{
struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
- destroy_workqueue(rbd_dev->rq_wq);
rbd_free_disk(rbd_dev);
clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
rbd_dev_mapping_clear(rbd_dev);
@@ -5716,11 +5706,21 @@
if (rc)
return rc;
+ /*
+ * The number of active work items is limited by the number of
+ * rbd devices, so leave @max_active at default.
+ */
+ rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
+ if (!rbd_wq) {
+ rc = -ENOMEM;
+ goto err_out_slab;
+ }
+
if (single_major) {
rbd_major = register_blkdev(0, RBD_DRV_NAME);
if (rbd_major < 0) {
rc = rbd_major;
- goto err_out_slab;
+ goto err_out_wq;
}
}
@@ -5738,6 +5738,8 @@
err_out_blkdev:
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+err_out_wq:
+ destroy_workqueue(rbd_wq);
err_out_slab:
rbd_slab_exit();
return rc;
@@ -5749,6 +5751,7 @@
rbd_sysfs_cleanup();
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+ destroy_workqueue(rbd_wq);
rbd_slab_exit();
}
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index 65ef966..899bede 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -12,11 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
* ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 8b10f88..580dbf0 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -12,11 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c
index 3437009..270d84b 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.c
+++ b/drivers/i2c/algos/i2c-algo-pcf.c
@@ -14,11 +14,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- *
* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
* Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
* <mbailey@littlefeet-inc.com>
diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h
index 1ec703e..262ee80 100644
--- a/drivers/i2c/algos/i2c-algo-pcf.h
+++ b/drivers/i2c/algos/i2c-algo-pcf.h
@@ -12,12 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* -------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl> */
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 451e305..4f2d788 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 2fa21ce..45c5c48 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c
index 41fc683..65e32405 100644
--- a/drivers/i2c/busses/i2c-amd756-s4882.c
+++ b/drivers/i2c/busses/i2c-amd756-s4882.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index a16f728..6c7113d 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 917d545..e05a672 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -434,7 +434,7 @@
}
}
- ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ ret = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 8762458..6f8c075 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -21,10 +21,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index f3b89a4..5bdbc71 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -23,10 +23,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index 4d96147..d15b7c9 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -17,10 +17,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 3c20e4b..edca99d 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index d66b6cb..5a410ef 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index d31d313..acb40f9 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -19,10 +19,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index a743115..373dd4d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -18,10 +18,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index a44ea13..76e699f 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -9,10 +9,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c
index 4854970..92e8c0c 100644
--- a/drivers/i2c/busses/i2c-elektor.c
+++ b/drivers/i2c/busses/i2c-elektor.c
@@ -12,11 +12,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c
index 14d2b76..b7864cf 100644
--- a/drivers/i2c/busses/i2c-hydra.c
+++ b/drivers/i2c/busses/i2c-hydra.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 7cfc183..6ab4f1c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -15,10 +15,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index c48e46a..e9fb7cf 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -11,11 +11,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- *
* Author:
* Darius Augulis, Teltonika Inc.
*
diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h
index 097e270..2d6929c 100644
--- a/drivers/i2c/busses/i2c-iop3xx.h
+++ b/drivers/i2c/busses/i2c-iop3xx.h
@@ -11,11 +11,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index cf99dbf..113293d 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -14,10 +14,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index 3f6ecbf..f2b0ff0 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -14,10 +14,6 @@
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c
index b170bdf..88eda09 100644
--- a/drivers/i2c/busses/i2c-nforce2-s4985.c
+++ b/drivers/i2c/busses/i2c-nforce2-s4985.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index ee3a76c..70b3c91 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -17,10 +17,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0dffb0e..26942c1 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -22,10 +22,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c
index 62f55fe..d1f625f 100644
--- a/drivers/i2c/busses/i2c-parport-light.c
+++ b/drivers/i2c/busses/i2c-parport-light.c
@@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c
index a27aae2..a1fac5a 100644
--- a/drivers/i2c/busses/i2c-parport.c
+++ b/drivers/i2c/busses/i2c-parport.c
@@ -18,10 +18,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h
index e572f3a..4e12945 100644
--- a/drivers/i2c/busses/i2c-parport.h
+++ b/drivers/i2c/busses/i2c-parport.h
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0
diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c
index 7a9dce4..df1dbc9 100644
--- a/drivers/i2c/busses/i2c-pasemi.c
+++ b/drivers/i2c/busses/i2c-pasemi.c
@@ -11,10 +11,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c
index 323f061..e0eb4ca 100644
--- a/drivers/i2c/busses/i2c-pca-isa.c
+++ b/drivers/i2c/busses/i2c-pca-isa.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index a6f54ba..67cbec6 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -11,10 +11,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
index 8564768..177834e 100644
--- a/drivers/i2c/busses/i2c-pmcmsp.c
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -18,10 +18,6 @@
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 01e9677..60a53c1 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -14,10 +14,6 @@
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
*/
#include <linux/module.h>
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index e3b0337..6524477 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 8b5e79c..4855188 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -14,10 +14,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c
index 0fe505d..2b6219d 100644
--- a/drivers/i2c/busses/i2c-sibyte.c
+++ b/drivers/i2c/busses/i2c-sibyte.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c
index 964e5c6..15ac839 100644
--- a/drivers/i2c/busses/i2c-simtec.c
+++ b/drivers/i2c/busses/i2c-simtec.c
@@ -12,10 +12,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index ac9bc33..7d58a40 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -11,10 +11,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Note: we assume there can only be one SIS5595 with one SMBus interface */
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index c636673..1e6805b 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -10,10 +10,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 8dc2fc5..44b9044 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -10,10 +10,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
index 10855a0..4c7fc2d 100644
--- a/drivers/i2c/busses/i2c-taos-evm.c
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -13,10 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c
index f4a1ed7..59b1d23 100644
--- a/drivers/i2c/busses/i2c-via.c
+++ b/drivers/i2c/busses/i2c-via.c
@@ -12,10 +12,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 6841200..0ee2646 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -13,10 +13,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index ade9223..cc65ea0 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -12,10 +12,6 @@
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
*
* This code was implemented by Mocean Laboratories AB when porting linux
* to the automotive development board Russellville. The copyright holder
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index ff3f574..5153354 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -17,10 +17,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c
index f24cc64..90e3229 100644
--- a/drivers/i2c/i2c-boardinfo.c
+++ b/drivers/i2c/i2c-boardinfo.c
@@ -10,11 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 2f90ac6..f43b4e1 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -10,12 +10,7 @@
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
@@ -670,6 +665,9 @@
status = driver->remove(client);
}
+ if (dev->of_node)
+ irq_dispose_mapping(client->irq);
+
dev_pm_domain_detach(&client->dev, true);
return status;
}
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 18a8fd2..17700bf 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -10,11 +10,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/rwsem.h>
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index 80b47e8..71c7a39 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -14,11 +14,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
*/
/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index fc99f0d..9ebf9cb 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -13,11 +13,6 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
index d241aa2..af2a94e 100644
--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -13,10 +13,6 @@
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 98909a9..a23e58c 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -894,7 +894,7 @@
static const struct iio_event_spec kxcjk1013_event = {
.type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c
index a15006e..0763b86 100644
--- a/drivers/iio/light/tsl4531.c
+++ b/drivers/iio/light/tsl4531.c
@@ -230,9 +230,12 @@
return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
TSL4531_MODE_NORMAL);
}
-#endif
static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+#define TSL4531_PM_OPS (&tsl4531_pm_ops)
+#else
+#define TSL4531_PM_OPS NULL
+#endif
static const struct i2c_device_id tsl4531_id[] = {
{ "tsl4531", 0 },
@@ -243,7 +246,7 @@
static struct i2c_driver tsl4531_driver = {
.driver = {
.name = TSL4531_DRV_NAME,
- .pm = &tsl4531_pm_ops,
+ .pm = TSL4531_PM_OPS,
.owner = THIS_MODULE,
},
.probe = tsl4531_probe,
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index 5e780ef..8349cc0 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -330,7 +330,7 @@
return -EINVAL;
}
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(st));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c
index 3e238cd..6a2e168c 100644
--- a/drivers/irqchip/irq-armada-370-xp.c
+++ b/drivers/irqchip/irq-armada-370-xp.c
@@ -43,6 +43,7 @@
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
+#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid)
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_375_PPI_CAUSE (0x10)
@@ -406,19 +407,29 @@
struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
- unsigned long irqmap, irqn;
+ unsigned long irqmap, irqn, irqsrc, cpuid;
unsigned int cascade_irq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE);
-
- if (irqmap & BIT(0)) {
- armada_370_xp_handle_msi_irq(NULL, true);
- irqmap &= ~BIT(0);
- }
+ cpuid = cpu_logical_map(smp_processor_id());
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base +
+ ARMADA_370_XP_INT_SOURCE_CTL(irqn));
+
+ /* Check if the interrupt is not masked on current CPU.
+ * Test IRQ (0-1) and FIQ (8-9) mask bits.
+ */
+ if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid)))
+ continue;
+
+ if (irqn == 1) {
+ armada_370_xp_handle_msi_irq(NULL, true);
+ continue;
+ }
+
cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn);
generic_handle_irq(cascade_irq);
}
diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c
index b8579ee..2cf3057 100644
--- a/drivers/media/dvb-core/dvb_frontend.c
+++ b/drivers/media/dvb-core/dvb_frontend.c
@@ -962,6 +962,11 @@
case SYS_ATSC:
c->modulation = VSB_8;
break;
+ case SYS_ISDBS:
+ c->symbol_rate = 28860000;
+ c->rolloff = ROLLOFF_35;
+ c->bandwidth_hz = c->symbol_rate / 100 * 135;
+ break;
default:
c->modulation = QAM_AUTO;
break;
@@ -2072,6 +2077,7 @@
break;
case SYS_DVBS:
case SYS_TURBO:
+ case SYS_ISDBS:
rolloff = 135;
break;
case SYS_DVBS2:
diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c
index 335daef..9d0d034 100644
--- a/drivers/media/dvb-frontends/ds3000.c
+++ b/drivers/media/dvb-frontends/ds3000.c
@@ -864,6 +864,13 @@
memcpy(&state->frontend.ops, &ds3000_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+
+ /*
+ * Some devices like T480 starts with voltage on. Be sure
+ * to turn voltage off during init, as this can otherwise
+ * interfere with Unicable SCR systems.
+ */
+ ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
return &state->frontend;
error3:
diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c
index 9b684d5..15bf431 100644
--- a/drivers/media/dvb-frontends/sp2.c
+++ b/drivers/media/dvb-frontends/sp2.c
@@ -266,7 +266,7 @@
return s->status;
}
-int sp2_init(struct sp2 *s)
+static int sp2_init(struct sp2 *s)
{
int ret = 0;
u8 buf;
@@ -348,7 +348,7 @@
return ret;
}
-int sp2_exit(struct i2c_client *client)
+static int sp2_exit(struct i2c_client *client)
{
struct sp2 *s;
diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c
index d9905fb..b35d65c 100644
--- a/drivers/media/dvb-frontends/tc90522.c
+++ b/drivers/media/dvb-frontends/tc90522.c
@@ -216,32 +216,30 @@
c->delivery_system = SYS_ISDBS;
layers = 0;
- ret = reg_read(state, 0xe8, val, 3);
+ ret = reg_read(state, 0xe6, val, 5);
if (ret == 0) {
- int slots;
u8 v;
+ c->stream_id = val[0] << 8 | val[1];
+
/* high/single layer */
- v = (val[0] & 0x70) >> 4;
+ v = (val[2] & 0x70) >> 4;
c->modulation = (v == 7) ? PSK_8 : QPSK;
c->fec_inner = fec_conv_sat[v];
c->layer[0].fec = c->fec_inner;
c->layer[0].modulation = c->modulation;
- c->layer[0].segment_count = val[1] & 0x3f; /* slots */
+ c->layer[0].segment_count = val[3] & 0x3f; /* slots */
/* low layer */
- v = (val[0] & 0x07);
+ v = (val[2] & 0x07);
c->layer[1].fec = fec_conv_sat[v];
if (v == 0) /* no low layer */
c->layer[1].segment_count = 0;
else
- c->layer[1].segment_count = val[2] & 0x3f; /* slots */
+ c->layer[1].segment_count = val[4] & 0x3f; /* slots */
/* actually, BPSK if v==1, but not defined in fe_modulation_t */
c->layer[1].modulation = QPSK;
layers = (v > 0) ? 2 : 1;
-
- slots = c->layer[0].segment_count + c->layer[1].segment_count;
- c->symbol_rate = 28860000 * slots / 48;
}
/* statistics */
@@ -363,7 +361,7 @@
u8 v;
c->isdbt_partial_reception = val[0] & 0x01;
- c->isdbt_sb_mode = (val[0] & 0xc0) == 0x01;
+ c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40;
/* layer A */
v = (val[2] & 0x78) >> 3;
diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c
index 2c61a62..686c3c2 100644
--- a/drivers/media/platform/vivid/vivid-core.c
+++ b/drivers/media/platform/vivid/vivid-core.c
@@ -100,11 +100,9 @@
"\t\t bit 0=crop, 1=compose, 2=scale,\n"
"\t\t -1=user-controlled (default)");
-static unsigned multiplanar[VIVID_MAX_DEVS];
+static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
module_param_array(multiplanar, uint, NULL, 0444);
-MODULE_PARM_DESC(multiplanar, " 0 (default) is alternating single and multiplanar devices,\n"
- "\t\t 1 is single planar devices,\n"
- "\t\t 2 is multiplanar devices");
+MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
/* Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr + vbi-out + vid-out */
static unsigned node_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0x1d3d };
@@ -669,10 +667,7 @@
/* start detecting feature set */
/* do we use single- or multi-planar? */
- if (multiplanar[inst] == 0)
- dev->multiplanar = inst & 1;
- else
- dev->multiplanar = multiplanar[inst] > 1;
+ dev->multiplanar = multiplanar[inst] > 1;
v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
dev->multiplanar ? "multi" : "single ");
diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c
index b8837dd..65f80b8 100644
--- a/drivers/media/rc/imon.c
+++ b/drivers/media/rc/imon.c
@@ -1678,7 +1678,8 @@
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- if (ictx->rc_type == RC_BIT_RC6_MCE)
+ if (ictx->rc_type == RC_BIT_RC6_MCE ||
+ ictx->rc_type == RC_BIT_OTHER)
rc_keydown(ictx->rdev,
ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
ictx->rc_scancode, ictx->rc_toggle);
diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c
index 08bbd4f..b0df629 100644
--- a/drivers/media/rc/ir-hix5hd2.c
+++ b/drivers/media/rc/ir-hix5hd2.c
@@ -297,7 +297,7 @@
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int hix5hd2_ir_suspend(struct device *dev)
{
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c
index 2ef7639..84fa6e9 100644
--- a/drivers/media/rc/ir-rc5-decoder.c
+++ b/drivers/media/rc/ir-rc5-decoder.c
@@ -53,7 +53,7 @@
u32 scancode;
enum rc_type protocol;
- if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+ if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ)))
return 0;
if (!is_timing_event(ev)) {
diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c
index e8fff2a..b732ac6 100644
--- a/drivers/media/rc/rc-ir-raw.c
+++ b/drivers/media/rc/rc-ir-raw.c
@@ -262,7 +262,6 @@
return -ENOMEM;
dev->raw->dev = dev;
- dev->enabled_protocols = ~0;
dev->change_protocol = change_protocol;
rc = kfifo_alloc(&dev->raw->kfifo,
sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c
index a7991c7..8d3b74c 100644
--- a/drivers/media/rc/rc-main.c
+++ b/drivers/media/rc/rc-main.c
@@ -1421,6 +1421,8 @@
if (dev->change_protocol) {
u64 rc_type = (1 << rc_map->rc_type);
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ rc_type |= RC_BIT_LIRC;
rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_raw;
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 03c53b7..270d58a 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -311,7 +311,8 @@
struct device_node *np;
u32 bus_width;
int len, ret;
- bool cap_invert, gpio_invert;
+ bool cd_cap_invert, cd_gpio_invert = false;
+ bool ro_cap_invert, ro_gpio_invert = false;
if (!host->parent || !host->parent->of_node)
return 0;
@@ -359,16 +360,13 @@
if (of_find_property(np, "non-removable", &len)) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- if (of_property_read_bool(np, "cd-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ cd_cap_invert = of_property_read_bool(np, "cd-inverted");
if (of_find_property(np, "broken-cd", &len))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, true,
- 0, &gpio_invert);
+ 0, &cd_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
return ret;
@@ -391,17 +389,14 @@
* both inverted, the end result is that the CD line is
* not inverted.
*/
- if (cap_invert ^ gpio_invert)
+ if (cd_cap_invert ^ cd_gpio_invert)
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
}
/* Parse Write Protection */
- if (of_property_read_bool(np, "wp-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ ro_cap_invert = of_property_read_bool(np, "wp-inverted");
- ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
+ ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
goto out;
@@ -414,7 +409,7 @@
dev_info(host->parent, "Got WP GPIO\n");
/* See the comment on CD inversion above */
- if (cap_invert ^ gpio_invert)
+ if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
if (of_find_property(np, "cap-sd-highspeed", &len))
diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
index 8c84298..f091576 100644
--- a/drivers/phy/phy-omap-usb2.c
+++ b/drivers/phy/phy-omap-usb2.c
@@ -258,14 +258,16 @@
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
- if (IS_ERR(generic_phy))
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
return PTR_ERR(generic_phy);
+ }
phy_set_drvdata(generic_phy, phy);
- pm_runtime_enable(phy->dev);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c
index e12e5b0..9dc3814 100644
--- a/drivers/pinctrl/pinctrl-baytrail.c
+++ b/drivers/pinctrl/pinctrl-baytrail.c
@@ -227,10 +227,14 @@
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
+ WARN(value & BYT_DIRECT_IRQ_EN,
+ "Bad pad config for io mode, force direct_irq_en bit clearing");
+
/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
* are used to indicate high and low level triggering
*/
- value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
+ BYT_TRIG_LVL);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
@@ -318,7 +322,7 @@
"Potential Error: Setting GPIO with direct_irq_en to output");
reg_val = readl(reg) | BYT_DIR_MASK;
- reg_val &= ~BYT_OUTPUT_EN;
+ reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN);
if (value)
writel(reg_val | BYT_LEVEL, reg);
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 96a0b75..26c4fd1 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -579,6 +579,17 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
},
},
+ {
+ /*
+ * Note no video_set_backlight_video_vendor, we must use the
+ * acer interface, as there is no native backlight interface.
+ */
+ .ident = "Acer KAV80",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
+ },
+ },
{}
};
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 3a4951f..c1a6cd6 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -182,6 +182,15 @@
},
{
.callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550VB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550VB"),
+ },
+ .driver_data = &quirk_asus_wapf4,
+ },
+ {
+ .callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X55A",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 02152de..ed494f3 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -837,6 +837,13 @@
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
+ {
+ .ident = "Lenovo Yoga 3 Pro 1370",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"),
+ },
+ },
{}
};
diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c
index 5a59665..ff765d8 100644
--- a/drivers/platform/x86/samsung-laptop.c
+++ b/drivers/platform/x86/samsung-laptop.c
@@ -1561,6 +1561,16 @@
},
{
.callback = samsung_dmi_matched,
+ .ident = "NC210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
+ {
+ .callback = samsung_dmi_matched,
.ident = "730U3E/740U3E",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index ef3a190..ab6151f 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -240,6 +240,12 @@
DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"),
+ },
+ },
{}
};
diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index 86db310..d2a8c64c 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -163,7 +163,7 @@
struct max1586_platform_data *pdata)
{
struct max1586_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
struct device_node *np = dev->of_node;
int i, matched;
diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c
index ef1af2d..f69320e 100644
--- a/drivers/regulator/max77686.c
+++ b/drivers/regulator/max77686.c
@@ -395,7 +395,7 @@
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index c67ff05..d158f71 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -227,7 +227,7 @@
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77693_regulator_data *rdata = NULL;
int num_rdata, i;
- struct regulator_config config;
+ struct regulator_config config = { };
num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata);
if (!rdata || num_rdata <= 0) {
diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c
index d89792b..45fa240 100644
--- a/drivers/regulator/max77802.c
+++ b/drivers/regulator/max77802.c
@@ -454,7 +454,7 @@
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct device_node *pmic_np, *regulators_np;
struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
+ struct of_regulator_match rmatch = { };
unsigned int i;
pmic_np = iodev->dev->of_node;
diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c
index 2fc4111..7eee2ca 100644
--- a/drivers/regulator/max8660.c
+++ b/drivers/regulator/max8660.c
@@ -335,7 +335,7 @@
int matched, i;
struct device_node *np;
struct max8660_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
np = of_get_child_by_name(dev->of_node, "regulators");
if (!np) {
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 7a51814..5a1d4af 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -211,7 +211,8 @@
search = dev->of_node;
if (!search) {
- dev_err(dev, "Failed to find regulator container node\n");
+ dev_dbg(dev, "Failed to find regulator container node '%s'\n",
+ desc->regulators_node);
return NULL;
}
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 4acefa6..7633b9b 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -341,7 +341,7 @@
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
- struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+ struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
diff --git a/drivers/soc/versatile/soc-realview.c b/drivers/soc/versatile/soc-realview.c
index cea8ea3..1a07bf5 100644
--- a/drivers/soc/versatile/soc-realview.c
+++ b/drivers/soc/versatile/soc-realview.c
@@ -26,6 +26,7 @@
{ .compatible = "arm,realview-pb11mp-soc", },
{ .compatible = "arm,realview-pba8-soc", },
{ .compatible = "arm,realview-pbx-soc", },
+ { }
};
static u32 realview_coreid;
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index 4482160..831ceb4 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -46,7 +46,7 @@
#define SPI_TCR 0x08
-#define SPI_CTAR(x) (0x0c + (x * 4))
+#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
#define SPI_CTAR_CPOL(x) ((x) << 26)
#define SPI_CTAR_CPHA(x) ((x) << 25)
@@ -70,7 +70,7 @@
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CONT (1 << 31)
-#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28)
#define SPI_PUSHR_EOQ (1 << 27)
#define SPI_PUSHR_CTCNT (1 << 26)
#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index d8a105f..9e9e0f9 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1274,7 +1274,9 @@
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable_unprepare(ssp->clk);
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(ssp->clk);
return 0;
}
@@ -1288,7 +1290,8 @@
pxa2xx_spi_dma_resume(drv_data);
/* Enable the SSP clock */
- clk_prepare_enable(ssp->clk);
+ if (!pm_runtime_suspended(dev))
+ clk_prepare_enable(ssp->clk);
/* Restore LPSS private register bits */
lpss_ssp_setup(drv_data);
diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h
index 0731820..e8c98cf 100644
--- a/drivers/staging/iio/meter/ade7758.h
+++ b/drivers/staging/iio/meter/ade7758.h
@@ -119,7 +119,6 @@
u8 *tx;
u8 *rx;
struct mutex buf_lock;
- const struct iio_chan_spec *ade7758_ring_channels;
struct spi_transfer ring_xfer[4];
struct spi_message ring_msg;
/*
diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c
index abc6006..fb373b8 100644
--- a/drivers/staging/iio/meter/ade7758_core.c
+++ b/drivers/staging/iio/meter/ade7758_core.c
@@ -634,9 +634,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
.scan_index = 0,
.scan_type = {
@@ -648,9 +645,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
.scan_index = 1,
.scan_type = {
@@ -662,9 +656,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
.scan_index = 2,
.scan_type = {
@@ -676,9 +668,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
.scan_index = 3,
.scan_type = {
@@ -690,9 +680,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
.scan_index = 4,
.scan_type = {
@@ -704,9 +692,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
.scan_index = 5,
.scan_type = {
@@ -718,9 +703,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
.scan_index = 6,
.scan_type = {
@@ -732,9 +714,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
.scan_index = 7,
.scan_type = {
@@ -746,9 +726,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
.scan_index = 8,
.scan_type = {
@@ -760,9 +738,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
.scan_index = 9,
.scan_type = {
@@ -774,9 +750,6 @@
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
.scan_index = 10,
.scan_type = {
@@ -788,9 +761,6 @@
.type = IIO_CURRENT,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
.scan_index = 11,
.scan_type = {
@@ -802,9 +772,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
.scan_index = 12,
.scan_type = {
@@ -816,9 +784,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
.scan_index = 13,
.scan_type = {
@@ -830,9 +796,7 @@
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
.scan_index = 14,
.scan_type = {
@@ -873,13 +837,14 @@
goto error_free_rx;
}
st->us = spi;
- st->ade7758_ring_channels = &ade7758_channels[0];
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ade7758_info;
indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ade7758_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ade7758_channels);
ret = ade7758_configure_ring(indio_dev);
if (ret)
diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c
index c0accf8..6e90064 100644
--- a/drivers/staging/iio/meter/ade7758_ring.c
+++ b/drivers/staging/iio/meter/ade7758_ring.c
@@ -85,17 +85,16 @@
**/
static int ade7758_ring_preenable(struct iio_dev *indio_dev)
{
- struct ade7758_state *st = iio_priv(indio_dev);
unsigned channel;
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+ if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
return -EINVAL;
channel = find_first_bit(indio_dev->active_scan_mask,
indio_dev->masklength);
ade7758_write_waveform_type(&indio_dev->dev,
- st->ade7758_ring_channels[channel].address);
+ indio_dev->channels[channel].address);
return 0;
}
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index f8eb625..62143ba 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -387,15 +387,18 @@
int (*get_trend)(void *, long *))
{
struct device_node *np, *child, *sensor_np;
+ struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np)
return ERR_PTR(-ENODEV);
- if (!dev || !dev->of_node)
+ if (!dev || !dev->of_node) {
+ of_node_put(np);
return ERR_PTR(-EINVAL);
+ }
- sensor_np = dev->of_node;
+ sensor_np = of_node_get(dev->of_node);
for_each_child_of_node(np, child) {
struct of_phandle_args sensor_specs;
@@ -422,16 +425,21 @@
}
if (sensor_specs.np == sensor_np && id == sensor_id) {
- of_node_put(np);
- return thermal_zone_of_add_sensor(child, sensor_np,
- data,
- get_temp,
- get_trend);
+ tzd = thermal_zone_of_add_sensor(child, sensor_np,
+ data,
+ get_temp,
+ get_trend);
+ of_node_put(sensor_specs.np);
+ of_node_put(child);
+ goto exit;
}
+ of_node_put(sensor_specs.np);
}
+exit:
+ of_node_put(sensor_np);
of_node_put(np);
- return ERR_PTR(-ENODEV);
+ return tzd;
}
EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
@@ -623,6 +631,7 @@
/* Required for cooling map matching */
trip->np = np;
+ of_node_get(np);
return 0;
}
@@ -730,9 +739,14 @@
return tz;
free_tbps:
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
free_trips:
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
+ of_node_put(gchild);
free_tz:
kfree(tz);
of_node_put(child);
@@ -742,7 +756,13 @@
static inline void of_thermal_free_zone(struct __thermal_zone *tz)
{
+ int i;
+
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
kfree(tz);
}
@@ -814,10 +834,13 @@
/* attempting to build remaining zones still */
}
}
+ of_node_put(np);
return 0;
exit_free:
+ of_node_put(child);
+ of_node_put(np);
of_thermal_free_zone(tz);
/* no memory available, so free what we have built */
@@ -859,4 +882,5 @@
kfree(zone->ops);
of_thermal_free_zone(zone->devdata);
}
+ of_node_put(np);
}
diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h
index 3eb2ed9..158f5aa 100644
--- a/drivers/thermal/samsung/exynos_thermal_common.h
+++ b/drivers/thermal/samsung/exynos_thermal_common.h
@@ -27,7 +27,7 @@
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index acbff14..49c0924 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -77,16 +77,6 @@
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
@@ -101,7 +91,7 @@
temp_code = temp + pdata->default_temp_offset;
break;
}
-out:
+
return temp_code;
}
@@ -114,16 +104,6 @@
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
@@ -138,18 +118,35 @@
temp = temp_code - pdata->default_temp_offset;
break;
}
-out:
+
return temp;
}
+static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ const struct exynos_tmu_registers *reg = data->pdata->registers;
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + reg->tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + reg->tmu_intclear);
+}
+
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
+ int ret = 0, threshold_code, i;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -164,11 +161,17 @@
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
-
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
/* Save trimming info in order to perform calibration */
if (data->soc == SOC_ARCH_EXYNOS5440) {
@@ -197,7 +200,7 @@
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
@@ -207,67 +210,33 @@
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
+ (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
-skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
-
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
-
rising_threshold = readl(data->base + reg->threshold_th0);
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
writeb(threshold_code,
data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
} else {
/* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i] -
pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
+ falling_threshold |= threshold_code << 8 * i;
}
}
@@ -276,9 +245,7 @@
writel(falling_threshold,
data->base + reg->threshold_th1);
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
/* if last threshold limit is also present */
i = pdata->max_trigger_level - 1;
@@ -286,10 +253,6 @@
(pdata->trigger_type[i] == HW_TRIP)) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
@@ -325,7 +288,7 @@
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
+ unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
@@ -335,15 +298,11 @@
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
@@ -351,29 +310,8 @@
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
-
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
@@ -383,7 +321,7 @@
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
@@ -404,8 +342,16 @@
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ temp = code_to_temp(data, temp_code);
+out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
@@ -465,7 +411,7 @@
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
+ unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
@@ -483,9 +429,7 @@
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h
index 1b4a644..c58c766 100644
--- a/drivers/thermal/samsung/exynos_tmu.h
+++ b/drivers/thermal/samsung/exynos_tmu.h
@@ -34,11 +34,6 @@
TYPE_NONE,
};
-enum calibration_mode {
- SW_MODE,
- HW_MODE,
-};
-
enum soc_type {
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
@@ -82,46 +77,19 @@
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_data: register containing 2 pont trimming data
- * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
- * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
+ * @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
- * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
- * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
- register.
- * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
- * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl
- register.
- * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
- register.
- * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
- tmu_ctrl register.
- * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
- register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
- * @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
- * @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
- * @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
@@ -130,68 +98,35 @@
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @inten_fall1_shift: shift bits of falling 1 interrupt bits.
- * @inten_fall2_shift: shift bits of falling 2 interrupt bits.
- * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
- * @intclr_fall_shift: shift bits for interrupt clear fall 0
- * @intclr_rise_shift: shift bits of all rising interrupt bits.
- * @intclr_rise_mask: mask bits of all rising interrupt bits.
- * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
- * @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
u32 triminfo_data;
- u32 triminfo_25_shift;
- u32 triminfo_85_shift;
- u32 triminfo_ctrl;
- u32 triminfo_ctrl1;
- u32 triminfo_reload_shift;
+ u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+ u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
- u32 buf_vref_sel_shift;
- u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
- u32 buf_slope_sel_shift;
- u32 buf_slope_sel_mask;
- u32 calib_mode_shift;
- u32 calib_mode_mask;
- u32 therm_trip_tq_en_shift;
- u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
- u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
- u32 threshold_th0_l0_shift;
- u32 threshold_th0_l1_shift;
- u32 threshold_th0_l2_shift;
- u32 threshold_th0_l3_shift;
-
u32 threshold_th1;
- u32 threshold_th1_l0_shift;
- u32 threshold_th1_l1_shift;
- u32 threshold_th1_l2_shift;
- u32 threshold_th1_l3_shift;
-
u32 threshold_th2;
- u32 threshold_th2_l0_shift;
-
- u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
@@ -200,22 +135,14 @@
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
- u32 inten_fall1_shift;
- u32 inten_fall2_shift;
- u32 inten_fall3_shift;
u32 tmu_intstat;
u32 tmu_intclear;
- u32 intclr_fall_shift;
- u32 intclr_rise_shift;
- u32 intclr_fall_mask;
- u32 intclr_rise_mask;
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
- u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;
@@ -250,11 +177,12 @@
* 1 = enable trigger_level[] interrupt,
* 0 = disable trigger_level[] interrupt
* @max_trigger_level: max trigger level supported by the TMU
+ * @non_hw_trigger_levels: number of defined non-hardware trigger levels
* @gain: gain of amplifier in the positive-TC generator block
- * 0 <= gain <= 15
+ * 0 < gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
- * 0 <= reference_voltage <= 31
+ * 0 < reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
@@ -265,8 +193,8 @@
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
+ * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
- * @cal_mode: calibration mode for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
@@ -284,6 +212,7 @@
enum trigger_type trigger_type[MAX_TRIP_COUNT];
bool trigger_enable[MAX_TRIP_COUNT];
u8 max_trigger_level;
+ u8 non_hw_trigger_levels;
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
@@ -295,9 +224,9 @@
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
+ u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
- enum calibration_mode cal_mode;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c
index aa8e0de..2683d28 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.c
+++ b/drivers/thermal/samsung/exynos_tmu_data.c
@@ -27,14 +27,7 @@
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
@@ -46,7 +39,6 @@
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
@@ -64,6 +56,7 @@
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
+ .non_hw_trigger_levels = 3,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
@@ -93,18 +86,14 @@
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
+ .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 2,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -116,14 +105,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
@@ -141,6 +125,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -160,8 +145,10 @@
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
+ .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos3250_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
@@ -182,20 +169,13 @@
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
- .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -208,14 +188,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
@@ -233,6 +208,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -252,6 +228,7 @@
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
@@ -286,18 +263,11 @@
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -310,14 +280,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5260_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5260_TMU_DATA \
@@ -335,6 +300,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -359,9 +325,8 @@
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
.type = SOC_ARCH_EXYNOS5260, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
@@ -378,17 +343,10 @@
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
@@ -402,14 +360,9 @@
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5420_TMU_DATA \
@@ -427,6 +380,7 @@
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
@@ -451,16 +405,15 @@
#define EXYNOS5420_TMU_DATA \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5250, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
#define EXYNOS5420_TMU_DATA_SHARED \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
+ TMU_SUPPORT_ADDRESS_MULTIPLE)
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
@@ -477,19 +430,10 @@
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
- .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
@@ -504,10 +448,6 @@
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
@@ -521,11 +461,11 @@
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
+ .non_hw_trigger_levels = 1, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
- .cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h
index f0979e5..65e2ea6 100644
--- a/drivers/thermal/samsung/exynos_tmu_data.h
+++ b/drivers/thermal/samsung/exynos_tmu_data.h
@@ -39,55 +39,31 @@
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
#define EXYNOS_TMU_CORE_EN_SHIFT 0
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
-#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
-#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
-#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
-#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
-#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
-#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
-#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
-#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
-#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
-#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
-
-/* Exynos5250 and Exynos4412 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON 0x14
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
-#define EXYNOS_TMU_RISE_INT_MASK 0x111
-#define EXYNOS_TMU_RISE_INT_SHIFT 0
-#define EXYNOS_TMU_FALL_INT_MASK 0x111
-#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
-#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
-#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
-#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
-#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
-#define EXYNOS_TMU_CALIB_MODE_MASK 0x3
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
-#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
-#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
-#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
@@ -103,10 +79,6 @@
#define EXYNOS5260_TMU_REG_INTEN 0xC0
#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
-#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111
-#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16)
-#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111
-#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111
#define EXYNOS5260_EMUL_CON 0x100
/* Exynos4412 specific */
@@ -122,29 +94,17 @@
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
-#define EXYNOS5440_TMU_TEMP 0x008
-#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
-#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
-#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
-#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
-#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
-#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
-#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
-#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
index 9bf10aa..43b9070 100644
--- a/drivers/thermal/thermal_core.c
+++ b/drivers/thermal/thermal_core.c
@@ -1575,8 +1575,7 @@
thermal_zone_device_update(tz);
- if (!result)
- return tz;
+ return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c
index 89c4cee..2e900a9 100644
--- a/drivers/tty/n_tty.c
+++ b/drivers/tty/n_tty.c
@@ -2413,12 +2413,17 @@
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
- if (input_available_p(tty, 1))
- mask |= POLLIN | POLLRDNORM;
- if (tty->packet && tty->link->ctrl_status)
- mask |= POLLPRI | POLLIN | POLLRDNORM;
if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
mask |= POLLHUP;
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ else if (mask & POLLHUP) {
+ tty_flush_to_ldisc(tty);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
+ if (tty->packet && tty->link->ctrl_status)
+ mask |= POLLPRI | POLLIN | POLLRDNORM;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index 8f37d57..de7aae5 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -81,7 +81,7 @@
/* Set to highest baudrate supported */
if (baud >= 1152000)
baud = 921600;
- quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+ quot = (port->uartclk / (256 * baud)) + 1;
}
/*
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 8bc2563..56982da4 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -158,7 +158,7 @@
if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
return -EBUSY;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index df3a8c7..eaeb9a0 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -363,7 +363,7 @@
* The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
* Die! Die! Die!
*/
- if (baud == 38400)
+ if (try == 0 && baud == 38400)
baud = altbaud;
/*
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 16a2c02..0508a1d 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -1709,6 +1709,8 @@
int pty_master, tty_closing, o_tty_closing, do_sleep;
int idx;
char buf[64];
+ long timeout = 0;
+ int once = 1;
if (tty_paranoia_check(tty, inode, __func__))
return 0;
@@ -1789,11 +1791,18 @@
if (!do_sleep)
break;
- printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
- __func__, tty_name(tty, buf));
+ if (once) {
+ once = 0;
+ printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
+ __func__, tty_name(tty, buf));
+ }
tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
- schedule();
+ schedule_timeout_killable(timeout);
+ if (timeout < 120 * HZ)
+ timeout = 2 * timeout + 1;
+ else
+ timeout = MAX_SCHEDULE_TIMEOUT;
}
/*
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 610b720..59b25e0 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -539,6 +539,12 @@
/* Save original vc_unipagdir_loc in case we allocate a new one */
p = *vc->vc_uni_pagedir_loc;
+
+ if (!p) {
+ err = -EINVAL;
+
+ goto out_unlock;
+ }
if (p->refcount > 1) {
int j, k;
@@ -623,6 +629,7 @@
set_inverse_transl(vc, p, i); /* Update inverse translations */
set_inverse_trans_unicode(vc, p);
+out_unlock:
console_unlock();
return err;
}
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index e934e19..077d58a 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -60,6 +60,9 @@
static DEFINE_MUTEX(acm_table_lock);
+static void acm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *termios_old);
+
/*
* acm_table accessors
*/
@@ -145,8 +148,15 @@
/* devices aren't required to support these requests.
* the cdc acm descriptor tells whether they do...
*/
-#define acm_set_control(acm, control) \
- acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0)
+static inline int acm_set_control(struct acm *acm, int control)
+{
+ if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+ return -EOPNOTSUPP;
+
+ return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ control, NULL, 0);
+}
+
#define acm_set_line(acm, line) \
acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
#define acm_send_break(acm, ms) \
@@ -554,6 +564,8 @@
goto error_submit_urb;
}
+ acm_tty_set_termios(tty, NULL);
+
/*
* Unthrottle device in case the TTY was closed while throttled.
*/
@@ -980,11 +992,12 @@
/* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
- if (!newline.dwDTERate) {
+ if (C_BAUD(tty) == B0) {
newline.dwDTERate = acm->line.dwDTERate;
newctrl &= ~ACM_CTRL_DTR;
- } else
+ } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
newctrl |= ACM_CTRL_DTR;
+ }
if (newctrl != acm->ctrlout)
acm_set_control(acm, acm->ctrlout = newctrl);
@@ -1314,6 +1327,7 @@
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
init_usb_anchor(&acm->delayed);
+ acm->quirks = quirks;
buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
@@ -1681,6 +1695,9 @@
{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+ .driver_info = QUIRK_CONTROL_LINE_STATE, },
+ { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
/* Motorola H24 HSPA module: */
diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h
index fc75651..d3251eb 100644
--- a/drivers/usb/class/cdc-acm.h
+++ b/drivers/usb/class/cdc-acm.h
@@ -121,6 +121,7 @@
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
struct usb_anchor delayed; /* writes queued for a device about to be woken */
+ unsigned long quirks;
};
#define CDC_DATA_INTERFACE_TYPE 0x0a
@@ -132,3 +133,4 @@
#define NOT_A_MODEM BIT(3)
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
+#define QUIRK_CONTROL_LINE_STATE BIT(6)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index b84fb14..a6efb41 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2060,6 +2060,8 @@
return -EINVAL;
if (dev->speed != USB_SPEED_SUPER)
return -EINVAL;
+ if (dev->state < USB_STATE_CONFIGURED)
+ return -ENODEV;
for (i = 0; i < num_eps; i++) {
/* Streams only apply to bulk endpoints. */
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 11e80ac..b649fef 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -4468,9 +4468,6 @@
if (retval)
goto fail;
- if (hcd->usb_phy && !hdev->parent)
- usb_phy_notify_connect(hcd->usb_phy, udev->speed);
-
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
@@ -4627,8 +4624,7 @@
/* Disconnect any existing devices under this port */
if (udev) {
- if (hcd->usb_phy && !hdev->parent &&
- !(portstatus & USB_PORT_STAT_CONNECTION))
+ if (hcd->usb_phy && !hdev->parent)
usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
usb_disconnect(&port_dev->child);
}
@@ -4783,6 +4779,10 @@
port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
mutex_unlock(&usb_port_peer_mutex);
+ } else {
+ if (hcd->usb_phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->usb_phy,
+ udev->speed);
}
}
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 5ae883d..39b4081 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -97,6 +97,12 @@
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
+ { USB_DEVICE(0x04f3, 0x009b), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
+ { USB_DEVICE(0x04f3, 0x016f), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index eee8709..8b5c079 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -2327,7 +2327,7 @@
u32 usb_status = readl(hsotg->regs + GOTGCTL);
- dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
readl(hsotg->regs + GNPTXSTS));
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index a8a30b1..a3ca137 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -234,7 +234,7 @@
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
@@ -550,7 +550,7 @@
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c
index d0d8fad..1db0626 100644
--- a/drivers/usb/host/hwa-hc.c
+++ b/drivers/usb/host/hwa-hc.c
@@ -607,7 +607,7 @@
wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
- le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+ (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
result = 0;
error:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 280dde9..9a69b1f 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -128,20 +128,6 @@
xhci->quirks |= XHCI_AVOID_BEI;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
- /* Workaround for occasional spurious wakeups from S5 (or
- * any other sleep) on Haswell machines with LPT and LPT-LP
- * with the new Intel BIOS
- */
- /* Limit the quirk to only known vendors, as this triggers
- * yet another BIOS bug on some other machines
- * https://bugzilla.kernel.org/show_bug.cgi?id=66171
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
- xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
- }
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
}
@@ -162,6 +148,10 @@
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == 0x1042)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index 3d2bd65..02c420a 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -335,7 +335,8 @@
port->interrupt_out_urb->transfer_buffer_length = length;
priv->cur_pos = priv->cur_pos + length;
- result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+ result = usb_submit_urb(port->interrupt_out_urb,
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
todo = priv->filled - priv->cur_pos;
@@ -350,7 +351,7 @@
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
result = usb_submit_urb(port->interrupt_in_urb,
- GFP_NOIO);
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
}
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index 4856fb7..4b7bfb3 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -215,7 +215,7 @@
/* The connected devices do not have a bulk write endpoint,
* to transmit data to de barcode device the control endpoint is used */
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!dr) {
count = -ENOMEM;
goto error_no_dr;
diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c
index 4bc2fc9..73f125e 100644
--- a/drivers/usb/storage/initializers.c
+++ b/drivers/usb/storage/initializers.c
@@ -52,7 +52,7 @@
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
+ 0x01, 0x0, us->iobuf, 0x1, 5 * HZ);
usb_stor_dbg(us, "-- result is %d\n", result);
return 0;
@@ -100,7 +100,7 @@
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 0x01, 0x0, NULL, 0x0, 1000);
+ 0x01, 0x0, NULL, 0x0, 1 * HZ);
usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c
index 8591d89..27e4a58 100644
--- a/drivers/usb/storage/realtek_cr.c
+++ b/drivers/usb/storage/realtek_cr.c
@@ -626,6 +626,7 @@
return 0;
}
+#ifdef CONFIG_PM
static int config_autodelink_before_power_down(struct us_data *us)
{
struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
@@ -716,6 +717,7 @@
}
}
}
+#endif
#ifdef CONFIG_REALTEK_AUTOPM
static void fw5895_set_mmc_wp(struct us_data *us)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 22c7d43..b1d815e 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -1118,6 +1118,31 @@
*/
if (result == USB_STOR_XFER_LONG)
fake_sense = 1;
+
+ /*
+ * Sometimes a device will mistakenly skip the data phase
+ * and go directly to the status phase without sending a
+ * zero-length packet. If we get a 13-byte response here,
+ * check whether it really is a CSW.
+ */
+ if (result == USB_STOR_XFER_SHORT &&
+ srb->sc_data_direction == DMA_FROM_DEVICE &&
+ transfer_length - scsi_get_resid(srb) ==
+ US_BULK_CS_WRAP_LEN) {
+ struct scatterlist *sg = NULL;
+ unsigned int offset = 0;
+
+ if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+ US_BULK_CS_WRAP_LEN, srb, &sg,
+ &offset, FROM_XFER_BUF) ==
+ US_BULK_CS_WRAP_LEN &&
+ bcs->Signature ==
+ cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Device skipped data phase\n");
+ scsi_set_resid(srb, transfer_length);
+ goto skipped_data_phase;
+ }
+ }
}
/* See flow chart on pg 15 of the Bulk Only Transport spec for
@@ -1153,6 +1178,7 @@
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ skipped_data_phase:
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 8511b54..2fefaf9 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -54,6 +54,20 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
"Seagate",
@@ -61,6 +75,13 @@
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
"JMicron",
@@ -75,3 +96,10 @@
"ASM1051",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+ "VIA",
+ "VL711",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 97de0fb..a960440 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -925,7 +925,7 @@
size_t veclen, size_t total)
{
int ret;
- struct msghdr msg;
+ struct msghdr msg = {.msg_flags = 0,};
if (sock == NULL) {
ret = -EINVAL;
diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c
index 4e9d7c1..2a7ef4f 100644
--- a/fs/overlayfs/readdir.c
+++ b/fs/overlayfs/readdir.c
@@ -168,7 +168,7 @@
{
struct ovl_dir_cache *cache = od->cache;
- list_del(&od->cursor.l_node);
+ list_del_init(&od->cursor.l_node);
WARN_ON(cache->refcount <= 0);
cache->refcount--;
if (!cache->refcount) {
diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c
index 92e8f99..2810026 100644
--- a/fs/xfs/xfs_bmap_util.c
+++ b/fs/xfs/xfs_bmap_util.c
@@ -1338,7 +1338,10 @@
goto out;
}
-
+/*
+ * Preallocate and zero a range of a file. This mechanism has the allocation
+ * semantics of fallocate and in addition converts data in the range to zeroes.
+ */
int
xfs_zero_file_space(
struct xfs_inode *ip,
@@ -1346,65 +1349,30 @@
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
- uint granularity;
- xfs_off_t start_boundary;
- xfs_off_t end_boundary;
+ uint blksize;
int error;
trace_xfs_zero_file_space(ip);
- granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
+ blksize = 1 << mp->m_sb.sb_blocklog;
/*
- * Round the range of extents we are going to convert inwards. If the
- * offset is aligned, then it doesn't get changed so we zero from the
- * start of the block offset points to.
+ * Punch a hole and prealloc the range. We use hole punch rather than
+ * unwritten extent conversion for two reasons:
+ *
+ * 1.) Hole punch handles partial block zeroing for us.
+ *
+ * 2.) If prealloc returns ENOSPC, the file range is still zero-valued
+ * by virtue of the hole punch.
*/
- start_boundary = round_up(offset, granularity);
- end_boundary = round_down(offset + len, granularity);
+ error = xfs_free_file_space(ip, offset, len);
+ if (error)
+ goto out;
- ASSERT(start_boundary >= offset);
- ASSERT(end_boundary <= offset + len);
-
- if (start_boundary < end_boundary - 1) {
- /*
- * Writeback the range to ensure any inode size updates due to
- * appending writes make it to disk (otherwise we could just
- * punch out the delalloc blocks).
- */
- error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
- start_boundary, end_boundary - 1);
- if (error)
- goto out;
- truncate_pagecache_range(VFS_I(ip), start_boundary,
- end_boundary - 1);
-
- /* convert the blocks */
- error = xfs_alloc_file_space(ip, start_boundary,
- end_boundary - start_boundary - 1,
- XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT);
- if (error)
- goto out;
-
- /* We've handled the interior of the range, now for the edges */
- if (start_boundary != offset) {
- error = xfs_iozero(ip, offset, start_boundary - offset);
- if (error)
- goto out;
- }
-
- if (end_boundary != offset + len)
- error = xfs_iozero(ip, end_boundary,
- offset + len - end_boundary);
-
- } else {
- /*
- * It's either a sub-granularity range or the range spanned lies
- * partially across two adjacent blocks.
- */
- error = xfs_iozero(ip, offset, len);
- }
-
+ error = xfs_alloc_file_space(ip, round_down(offset, blksize),
+ round_up(offset + len, blksize) -
+ round_down(offset, blksize),
+ XFS_BMAPI_PREALLOC);
out:
return error;
diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c
index f1deb96..894924a 100644
--- a/fs/xfs/xfs_itable.c
+++ b/fs/xfs/xfs_itable.c
@@ -236,8 +236,10 @@
XFS_WANT_CORRUPTED_RETURN(stat == 1);
/* Check if the record contains the inode in request */
- if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino)
- return -EINVAL;
+ if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) {
+ *icount = 0;
+ return 0;
+ }
idx = agino - irec->ir_startino + 1;
if (idx < XFS_INODES_PER_CHUNK &&
@@ -262,75 +264,76 @@
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
+struct xfs_bulkstat_agichunk {
+ char __user **ac_ubuffer;/* pointer into user's buffer */
+ int ac_ubleft; /* bytes left in user's buffer */
+ int ac_ubelem; /* spaces used in user's buffer */
+};
+
/*
* Process inodes in chunk with a pointer to a formatter function
* that will iget the inode and fill in the appropriate structure.
*/
-int
+static int
xfs_bulkstat_ag_ichunk(
struct xfs_mount *mp,
xfs_agnumber_t agno,
struct xfs_inobt_rec_incore *irbp,
bulkstat_one_pf formatter,
size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp)
+ struct xfs_bulkstat_agichunk *acp,
+ xfs_agino_t *last_agino)
{
- xfs_ino_t lastino = acp->ac_lastino;
char __user **ubufp = acp->ac_ubuffer;
- int ubleft = acp->ac_ubleft;
- int ubelem = acp->ac_ubelem;
- int chunkidx, clustidx;
+ int chunkidx;
int error = 0;
- xfs_agino_t agino;
+ xfs_agino_t agino = irbp->ir_startino;
- for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
- XFS_BULKSTAT_UBLEFT(ubleft) &&
- irbp->ir_freecount < XFS_INODES_PER_CHUNK;
- chunkidx++, clustidx++, agino++) {
- int fmterror; /* bulkstat formatter result */
+ for (chunkidx = 0; chunkidx < XFS_INODES_PER_CHUNK;
+ chunkidx++, agino++) {
+ int fmterror;
int ubused;
- xfs_ino_t ino = XFS_AGINO_TO_INO(mp, agno, agino);
- ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
+ /* inode won't fit in buffer, we are done */
+ if (acp->ac_ubleft < statstruct_size)
+ break;
/* Skip if this inode is free */
- if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) {
- lastino = ino;
+ if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free)
continue;
- }
-
- /*
- * Count used inodes as free so we can tell when the
- * chunk is used up.
- */
- irbp->ir_freecount++;
/* Get the inode and fill in a single buffer */
ubused = statstruct_size;
- error = formatter(mp, ino, *ubufp, ubleft, &ubused, &fmterror);
- if (fmterror == BULKSTAT_RV_NOTHING) {
- if (error && error != -ENOENT && error != -EINVAL) {
- ubleft = 0;
- break;
- }
- lastino = ino;
- continue;
- }
- if (fmterror == BULKSTAT_RV_GIVEUP) {
- ubleft = 0;
+ error = formatter(mp, XFS_AGINO_TO_INO(mp, agno, agino),
+ *ubufp, acp->ac_ubleft, &ubused, &fmterror);
+
+ if (fmterror == BULKSTAT_RV_GIVEUP ||
+ (error && error != -ENOENT && error != -EINVAL)) {
+ acp->ac_ubleft = 0;
ASSERT(error);
break;
}
- if (*ubufp)
- *ubufp += ubused;
- ubleft -= ubused;
- ubelem++;
- lastino = ino;
+
+ /* be careful not to leak error if at end of chunk */
+ if (fmterror == BULKSTAT_RV_NOTHING || error) {
+ error = 0;
+ continue;
+ }
+
+ *ubufp += ubused;
+ acp->ac_ubleft -= ubused;
+ acp->ac_ubelem++;
}
- acp->ac_lastino = lastino;
- acp->ac_ubleft = ubleft;
- acp->ac_ubelem = ubelem;
+ /*
+ * Post-update *last_agino. At this point, agino will always point one
+ * inode past the last inode we processed successfully. Hence we
+ * substract that inode when setting the *last_agino cursor so that we
+ * return the correct cookie to userspace. On the next bulkstat call,
+ * the inode under the lastino cookie will be skipped as we have already
+ * processed it here.
+ */
+ *last_agino = agino - 1;
return error;
}
@@ -353,45 +356,33 @@
xfs_agino_t agino; /* inode # in allocation group */
xfs_agnumber_t agno; /* allocation group number */
xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */
- int end_of_ag; /* set if we've seen the ag end */
- int error; /* error code */
- int fmterror;/* bulkstat formatter result */
- int i; /* loop index */
- int icount; /* count of inodes good in irbuf */
size_t irbsize; /* size of irec buffer in bytes */
- xfs_ino_t ino; /* inode number (filesystem) */
- xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
- xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
- xfs_ino_t lastino; /* last inode number returned */
int nirbuf; /* size of irbuf */
- int rval; /* return value error code */
- int tmp; /* result value from btree calls */
int ubcount; /* size of user's buffer */
- int ubleft; /* bytes left in user's buffer */
- char __user *ubufp; /* pointer into user's buffer */
- int ubelem; /* spaces used in user's buffer */
+ struct xfs_bulkstat_agichunk ac;
+ int error = 0;
/*
* Get the last inode value, see if there's nothing to do.
*/
- ino = (xfs_ino_t)*lastinop;
- lastino = ino;
- agno = XFS_INO_TO_AGNO(mp, ino);
- agino = XFS_INO_TO_AGINO(mp, ino);
+ agno = XFS_INO_TO_AGNO(mp, *lastinop);
+ agino = XFS_INO_TO_AGINO(mp, *lastinop);
if (agno >= mp->m_sb.sb_agcount ||
- ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
+ *lastinop != XFS_AGINO_TO_INO(mp, agno, agino)) {
*done = 1;
*ubcountp = 0;
return 0;
}
ubcount = *ubcountp; /* statstruct's */
- ubleft = ubcount * statstruct_size; /* bytes */
- *ubcountp = ubelem = 0;
+ ac.ac_ubuffer = &ubuffer;
+ ac.ac_ubleft = ubcount * statstruct_size; /* bytes */;
+ ac.ac_ubelem = 0;
+
+ *ubcountp = 0;
*done = 0;
- fmterror = 0;
- ubufp = ubuffer;
+
irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4);
if (!irbuf)
return -ENOMEM;
@@ -402,9 +393,13 @@
* Loop over the allocation groups, starting from the last
* inode returned; 0 means start of the allocation group.
*/
- rval = 0;
- while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
- cond_resched();
+ while (agno < mp->m_sb.sb_agcount) {
+ struct xfs_inobt_rec_incore *irbp = irbuf;
+ struct xfs_inobt_rec_incore *irbufend = irbuf + nirbuf;
+ bool end_of_ag = false;
+ int icount = 0;
+ int stat;
+
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error)
break;
@@ -414,10 +409,6 @@
*/
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno,
XFS_BTNUM_INO);
- irbp = irbuf;
- irbufend = irbuf + nirbuf;
- end_of_ag = 0;
- icount = 0;
if (agino > 0) {
/*
* In the middle of an allocation group, we need to get
@@ -427,22 +418,23 @@
error = xfs_bulkstat_grab_ichunk(cur, agino, &icount, &r);
if (error)
- break;
+ goto del_cursor;
if (icount) {
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
}
/* Increment to the next record */
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
} else {
/* Start of ag. Lookup the first inode chunk */
- error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
+ error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &stat);
}
- if (error)
- break;
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
/*
* Loop through inode btree records in this ag,
@@ -451,10 +443,10 @@
while (irbp < irbufend && icount < ubcount) {
struct xfs_inobt_rec_incore r;
- error = xfs_inobt_get_rec(cur, &r, &i);
- if (error || i == 0) {
- end_of_ag = 1;
- break;
+ error = xfs_inobt_get_rec(cur, &r, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
/*
@@ -469,77 +461,79 @@
irbp++;
icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
}
- /*
- * Set agino to after this chunk and bump the cursor.
- */
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
cond_resched();
}
+
/*
- * Drop the btree buffers and the agi buffer.
- * We can't hold any of the locks these represent
- * when calling iget.
+ * Drop the btree buffers and the agi buffer as we can't hold any
+ * of the locks these represent when calling iget. If there is a
+ * pending error, then we are done.
*/
+del_cursor:
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
+ if (error)
+ break;
/*
- * Now format all the good inodes into the user's buffer.
+ * Now format all the good inodes into the user's buffer. The
+ * call to xfs_bulkstat_ag_ichunk() sets up the agino pointer
+ * for the next loop iteration.
*/
irbufend = irbp;
for (irbp = irbuf;
- irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
- struct xfs_bulkstat_agichunk ac;
-
- ac.ac_lastino = lastino;
- ac.ac_ubuffer = &ubuffer;
- ac.ac_ubleft = ubleft;
- ac.ac_ubelem = ubelem;
+ irbp < irbufend && ac.ac_ubleft >= statstruct_size;
+ irbp++) {
error = xfs_bulkstat_ag_ichunk(mp, agno, irbp,
- formatter, statstruct_size, &ac);
+ formatter, statstruct_size, &ac,
+ &agino);
if (error)
- rval = error;
-
- lastino = ac.ac_lastino;
- ubleft = ac.ac_ubleft;
- ubelem = ac.ac_ubelem;
+ break;
cond_resched();
}
+
/*
- * Set up for the next loop iteration.
+ * If we've run out of space or had a formatting error, we
+ * are now done
*/
- if (XFS_BULKSTAT_UBLEFT(ubleft)) {
- if (end_of_ag) {
- agno++;
- agino = 0;
- } else
- agino = XFS_INO_TO_AGINO(mp, lastino);
- } else
+ if (ac.ac_ubleft < statstruct_size || error)
break;
+
+ if (end_of_ag) {
+ agno++;
+ agino = 0;
+ }
}
/*
* Done, we're either out of filesystem or space to put the data.
*/
kmem_free(irbuf);
- *ubcountp = ubelem;
- /*
- * Found some inodes, return them now and return the error next time.
- */
- if (ubelem)
- rval = 0;
- if (agno >= mp->m_sb.sb_agcount) {
- /*
- * If we ran out of filesystem, mark lastino as off
- * the end of the filesystem, so the next call
- * will return immediately.
- */
- *lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0);
- *done = 1;
- } else
- *lastinop = (xfs_ino_t)lastino;
+ *ubcountp = ac.ac_ubelem;
- return rval;
+ /*
+ * We found some inodes, so clear the error status and return them.
+ * The lastino pointer will point directly at the inode that triggered
+ * any error that occurred, so on the next call the error will be
+ * triggered again and propagated to userspace as there will be no
+ * formatted inodes in the buffer.
+ */
+ if (ac.ac_ubelem)
+ error = 0;
+
+ /*
+ * If we ran out of filesystem, lastino will point off the end of
+ * the filesystem so the next call will return immediately.
+ */
+ *lastinop = XFS_AGINO_TO_INO(mp, agno, agino);
+ if (agno >= mp->m_sb.sb_agcount)
+ *done = 1;
+
+ return error;
}
int
diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h
index aaed080..6ea8b39 100644
--- a/fs/xfs/xfs_itable.h
+++ b/fs/xfs/xfs_itable.h
@@ -30,22 +30,6 @@
int *ubused,
int *stat);
-struct xfs_bulkstat_agichunk {
- xfs_ino_t ac_lastino; /* last inode returned */
- char __user **ac_ubuffer;/* pointer into user's buffer */
- int ac_ubleft; /* bytes left in user's buffer */
- int ac_ubelem; /* spaces used in user's buffer */
-};
-
-int
-xfs_bulkstat_ag_ichunk(
- struct xfs_mount *mp,
- xfs_agnumber_t agno,
- struct xfs_inobt_rec_incore *irbp,
- bulkstat_one_pf formatter,
- size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp);
-
/*
* Values for stat return value.
*/
diff --git a/include/linux/cma.h b/include/linux/cma.h
index 0430ed0..a93438b 100644
--- a/include/linux/cma.h
+++ b/include/linux/cma.h
@@ -18,12 +18,12 @@
extern phys_addr_t cma_get_base(struct cma *cma);
extern unsigned long cma_get_size(struct cma *cma);
-extern int __init cma_declare_contiguous(phys_addr_t size,
- phys_addr_t base, phys_addr_t limit,
+extern int __init cma_declare_contiguous(phys_addr_t base,
+ phys_addr_t size, phys_addr_t limit,
phys_addr_t alignment, unsigned int order_per_bit,
bool fixed, struct cma **res_cma);
-extern int cma_init_reserved_mem(phys_addr_t size,
- phys_addr_t base, int order_per_bit,
+extern int cma_init_reserved_mem(phys_addr_t base,
+ phys_addr_t size, int order_per_bit,
struct cma **res_cma);
extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align);
extern bool cma_release(struct cma *cma, struct page *pages, int count);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 64dacb7..24c7728 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -41,8 +41,13 @@
if (pci_is_root_bus(pbus))
dev = pbus->bridge;
- else
+ else {
+ /* If pbus is a virtual bus, there is no bridge to it */
+ if (!pbus->self)
+ return NULL;
+
dev = &pbus->self->dev;
+ }
return ACPI_HANDLE(dev);
}
diff --git a/mm/cma.c b/mm/cma.c
index 963bc4a..fde706e 100644
--- a/mm/cma.c
+++ b/mm/cma.c
@@ -124,6 +124,7 @@
err:
kfree(cma->bitmap);
+ cma->count = 0;
return -EINVAL;
}
@@ -217,9 +218,8 @@
phys_addr_t highmem_start = __pa(high_memory);
int ret = 0;
- pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n",
- __func__, (unsigned long)size, (unsigned long)base,
- (unsigned long)limit, (unsigned long)alignment);
+ pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
+ __func__, &size, &base, &limit, &alignment);
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
@@ -244,52 +244,72 @@
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
+ if (!base)
+ fixed = false;
+
/* size should be aligned with order_per_bit */
if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
/*
- * adjust limit to avoid crossing low/high memory boundary for
- * automatically allocated regions
+ * If allocating at a fixed base the request region must not cross the
+ * low/high memory boundary.
*/
- if (((limit == 0 || limit > memblock_end) &&
- (memblock_end - size < highmem_start &&
- memblock_end > highmem_start)) ||
- (!fixed && limit > highmem_start && limit - size < highmem_start)) {
- limit = highmem_start;
- }
-
- if (fixed && base < highmem_start && base+size > highmem_start) {
+ if (fixed && base < highmem_start && base + size > highmem_start) {
ret = -EINVAL;
- pr_err("Region at %08lx defined on low/high memory boundary (%08lx)\n",
- (unsigned long)base, (unsigned long)highmem_start);
+ pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",
+ &base, &highmem_start);
goto err;
}
+ /*
+ * If the limit is unspecified or above the memblock end, its effective
+ * value will be the memblock end. Set it explicitly to simplify further
+ * checks.
+ */
+ if (limit == 0 || limit > memblock_end)
+ limit = memblock_end;
+
/* Reserve memory */
- if (base && fixed) {
+ if (fixed) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
- phys_addr_t addr = memblock_alloc_range(size, alignment, base,
- limit);
- if (!addr) {
- ret = -ENOMEM;
- goto err;
- } else {
- base = addr;
+ phys_addr_t addr = 0;
+
+ /*
+ * All pages in the reserved area must come from the same zone.
+ * If the requested region crosses the low/high memory boundary,
+ * try allocating from high memory first and fall back to low
+ * memory in case of failure.
+ */
+ if (base < highmem_start && limit > highmem_start) {
+ addr = memblock_alloc_range(size, alignment,
+ highmem_start, limit);
+ limit = highmem_start;
}
+
+ if (!addr) {
+ addr = memblock_alloc_range(size, alignment, base,
+ limit);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ }
+
+ base = addr;
}
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
goto err;
- pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
- (unsigned long)base);
+ pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
+ &base);
return 0;
err:
diff --git a/mm/truncate.c b/mm/truncate.c
index 261eaf6..f1e4d60 100644
--- a/mm/truncate.c
+++ b/mm/truncate.c
@@ -715,8 +715,9 @@
* necessary) to @newsize. It will be typically be called from the filesystem's
* setattr function when ATTR_SIZE is passed in.
*
- * Must be called with inode_mutex held and before all filesystem specific
- * block truncation has been performed.
+ * Must be called with a lock serializing truncates and writes (generally
+ * i_mutex but e.g. xfs uses a different lock) and before all filesystem
+ * specific block truncation has been performed.
*/
void truncate_setsize(struct inode *inode, loff_t newsize)
{
@@ -755,7 +756,6 @@
struct page *page;
pgoff_t index;
- WARN_ON(!mutex_is_locked(&inode->i_mutex));
WARN_ON(to > inode->i_size);
if (from >= to || bsize == PAGE_CACHE_SIZE)
diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c
index de6662b..7e38b72 100644
--- a/net/ceph/auth_x.c
+++ b/net/ceph/auth_x.c
@@ -149,6 +149,7 @@
struct ceph_crypto_key old_key;
void *ticket_buf = NULL;
void *tp, *tpend;
+ void **ptp;
struct ceph_timespec new_validity;
struct ceph_crypto_key new_session_key;
struct ceph_buffer *new_ticket_blob;
@@ -208,25 +209,19 @@
goto out;
}
tp = ticket_buf;
- dlen = ceph_decode_32(&tp);
+ ptp = &tp;
+ tpend = *ptp + dlen;
} else {
/* unencrypted */
- ceph_decode_32_safe(p, end, dlen, bad);
- ticket_buf = kmalloc(dlen, GFP_NOFS);
- if (!ticket_buf) {
- ret = -ENOMEM;
- goto out;
- }
- tp = ticket_buf;
- ceph_decode_need(p, end, dlen, bad);
- ceph_decode_copy(p, ticket_buf, dlen);
+ ptp = p;
+ tpend = end;
}
- tpend = tp + dlen;
+ ceph_decode_32_safe(ptp, tpend, dlen, bad);
dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(ptp);
+ new_secret_id = ceph_decode_64(ptp);
+ ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend);
if (ret)
goto out;
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index 559c9f6..8d1653c 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -484,7 +484,7 @@
IPPROTO_TCP, &sock);
if (ret)
return ret;
- sock->sk->sk_allocation = GFP_NOFS;
+ sock->sk->sk_allocation = GFP_NOFS | __GFP_MEMALLOC;
#ifdef CONFIG_LOCKDEP
lockdep_set_class(&sock->sk->sk_lock, &socket_class);
@@ -509,6 +509,9 @@
return ret;
}
+
+ sk_set_memalloc(sock->sk);
+
con->sock = sock;
return 0;
}
@@ -2769,8 +2772,11 @@
{
struct ceph_connection *con = container_of(work, struct ceph_connection,
work.work);
+ unsigned long pflags = current->flags;
bool fault;
+ current->flags |= PF_MEMALLOC;
+
mutex_lock(&con->mutex);
while (true) {
int ret;
@@ -2824,6 +2830,8 @@
con_fault_finish(con);
con->ops->put(con);
+
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
}
/*
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index c9cf248..da03693 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -291,18 +291,14 @@
/* additional initialization for ALC888 variants */
static void alc888_coef_init(struct hda_codec *codec)
{
- if (alc_get_coef0(codec) == 0x20)
- /* alc888S-VC */
- alc_write_coef_idx(codec, 7, 0x830);
- else
- /* alc888-VB */
- alc_write_coef_idx(codec, 7, 0x3030);
-}
-
-/* additional initialization for ALC889 variants */
-static void alc889_coef_init(struct hda_codec *codec)
-{
- alc_update_coef_idx(codec, 7, 0, 0x2010);
+ switch (alc_get_coef0(codec) & 0x00f0) {
+ /* alc888-VA */
+ case 0x00:
+ /* alc888-VB */
+ case 0x10:
+ alc_update_coef_idx(codec, 7, 0, 0x2030); /* Turn EAPD to High */
+ break;
+ }
}
/* turn on/off EAPD control (only if available) */
@@ -359,25 +355,15 @@
case 0x10ec0260:
alc_update_coefex_idx(codec, 0x1a, 7, 0, 0x2010);
break;
- case 0x10ec0262:
case 0x10ec0880:
case 0x10ec0882:
case 0x10ec0883:
case 0x10ec0885:
- case 0x10ec0887:
- /*case 0x10ec0889:*/ /* this causes an SPDIF problem */
- case 0x10ec0900:
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
break;
case 0x10ec0888:
alc888_coef_init(codec);
break;
-#if 0 /* XXX: This may cause the silent output on speaker on some machines */
- case 0x10ec0267:
- case 0x10ec0268:
- alc_update_coef_idx(codec, 7, 0, 0x3000);
- break;
-#endif /* XXX */
}
break;
}
@@ -1710,7 +1696,7 @@
{
if (action != HDA_FIXUP_ACT_INIT)
return;
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
}
/* toggle speaker-output according to the hp-jack state */
@@ -3350,6 +3336,27 @@
}
}
+static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ /* Like hp_gpio_mic1_led, but also needs GPIO4 low to enable headphone amp */
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_verb gpio_init[] = {
+ { 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
+ { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
+ {}
+ };
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+ spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
+ spec->gpio_led = 0;
+ spec->cap_mute_led_nid = 0x18;
+ snd_hda_add_verbs(codec, gpio_init);
+ codec->power_filter = led_power_filter;
+ }
+}
+
static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
@@ -4217,6 +4224,7 @@
ALC283_FIXUP_BXBT2807_MIC,
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
ALC282_FIXUP_ASPIRE_V5_PINS,
+ ALC280_FIXUP_HP_GPIO4,
};
static const struct hda_fixup alc269_fixups[] = {
@@ -4680,7 +4688,10 @@
{ },
},
},
-
+ [ALC280_FIXUP_HP_GPIO4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc280_fixup_hp_gpio4,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
@@ -4728,21 +4739,16 @@
SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x8004, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
/* ALC290 */
SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2246, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2247, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2248, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2249, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2258, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -4751,7 +4757,6 @@
SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2277, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
@@ -4804,7 +4809,7 @@
SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
@@ -4984,6 +4989,19 @@
{0x17, 0x40000000},
{0x1d, 0x40700001},
{0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
+ {0x12, 0x90a60130},
+ {0x13, 0x40000000},
+ {0x14, 0x90170110},
+ {0x15, 0x0421101f},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x411111f0},
+ {0x19, 0x411111f0},
+ {0x1a, 0x04a11020},
+ {0x1b, 0x411111f0},
+ {0x1d, 0x40748605},
+ {0x1e, 0x411111f0}),
SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED,
{0x12, 0x90a60140},
{0x13, 0x40000000},
@@ -5651,6 +5669,35 @@
}
}
+static struct coef_fw alc668_coefs[] = {
+ WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
+ WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
+ WRITE_COEF(0x08, 0x0031), WRITE_COEF(0x0a, 0x0060), WRITE_COEF(0x0b, 0x0),
+ WRITE_COEF(0x0c, 0x7cf7), WRITE_COEF(0x0d, 0x1080), WRITE_COEF(0x0e, 0x7f7f),
+ WRITE_COEF(0x0f, 0xcccc), WRITE_COEF(0x10, 0xddcc), WRITE_COEF(0x11, 0x0001),
+ WRITE_COEF(0x13, 0x0), WRITE_COEF(0x14, 0x2aa0), WRITE_COEF(0x17, 0xa940),
+ WRITE_COEF(0x19, 0x0), WRITE_COEF(0x1a, 0x0), WRITE_COEF(0x1b, 0x0),
+ WRITE_COEF(0x1c, 0x0), WRITE_COEF(0x1d, 0x0), WRITE_COEF(0x1e, 0x7418),
+ WRITE_COEF(0x1f, 0x0804), WRITE_COEF(0x20, 0x4200), WRITE_COEF(0x21, 0x0468),
+ WRITE_COEF(0x22, 0x8ccc), WRITE_COEF(0x23, 0x0250), WRITE_COEF(0x24, 0x7418),
+ WRITE_COEF(0x27, 0x0), WRITE_COEF(0x28, 0x8ccc), WRITE_COEF(0x2a, 0xff00),
+ WRITE_COEF(0x2b, 0x8000), WRITE_COEF(0xa7, 0xff00), WRITE_COEF(0xa8, 0x8000),
+ WRITE_COEF(0xaa, 0x2e17), WRITE_COEF(0xab, 0xa0c0), WRITE_COEF(0xac, 0x0),
+ WRITE_COEF(0xad, 0x0), WRITE_COEF(0xae, 0x2ac6), WRITE_COEF(0xaf, 0xa480),
+ WRITE_COEF(0xb0, 0x0), WRITE_COEF(0xb1, 0x0), WRITE_COEF(0xb2, 0x0),
+ WRITE_COEF(0xb3, 0x0), WRITE_COEF(0xb4, 0x0), WRITE_COEF(0xb5, 0x1040),
+ WRITE_COEF(0xb6, 0xd697), WRITE_COEF(0xb7, 0x902b), WRITE_COEF(0xb8, 0xd697),
+ WRITE_COEF(0xb9, 0x902b), WRITE_COEF(0xba, 0xb8ba), WRITE_COEF(0xbb, 0xaaab),
+ WRITE_COEF(0xbc, 0xaaaf), WRITE_COEF(0xbd, 0x6aaa), WRITE_COEF(0xbe, 0x1c02),
+ WRITE_COEF(0xc0, 0x00ff), WRITE_COEF(0xc1, 0x0fa6),
+ {}
+};
+
+static void alc668_restore_default_value(struct hda_codec *codec)
+{
+ alc_process_coef_fw(codec, alc668_coefs);
+}
+
enum {
ALC662_FIXUP_ASPIRE,
ALC662_FIXUP_LED_GPIO1,
@@ -6118,8 +6165,15 @@
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- spec->init_hook = alc662_fill_coef;
- alc662_fill_coef(codec);
+ switch (codec->vendor_id) {
+ case 0x10ec0668:
+ spec->init_hook = alc668_restore_default_value;
+ break;
+ default:
+ spec->init_hook = alc662_fill_coef;
+ alc662_fill_coef(codec);
+ break;
+ }
snd_hda_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 7ecd0e8..f61ebb1 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -591,18 +591,19 @@
{
struct snd_card *card;
struct list_head *p;
+ bool was_shutdown;
if (chip == (void *)-1L)
return;
card = chip->card;
down_write(&chip->shutdown_rwsem);
+ was_shutdown = chip->shutdown;
chip->shutdown = 1;
up_write(&chip->shutdown_rwsem);
mutex_lock(®ister_mutex);
- chip->num_interfaces--;
- if (chip->num_interfaces <= 0) {
+ if (!was_shutdown) {
struct snd_usb_endpoint *ep;
snd_card_disconnect(card);
@@ -622,6 +623,10 @@
list_for_each(p, &chip->mixer_list) {
snd_usb_mixer_disconnect(p);
}
+ }
+
+ chip->num_interfaces--;
+ if (chip->num_interfaces <= 0) {
usb_chip[chip->index] = NULL;
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest
index a8f81c7..5152476 100755
--- a/tools/testing/selftests/ftrace/ftracetest
+++ b/tools/testing/selftests/ftrace/ftracetest
@@ -82,7 +82,7 @@
}
# Parameters
-DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' '`
+DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1`
TRACING_DIR=$DEBUGFS_DIR/tracing
TOP_DIR=`absdir $0`
TEST_DIR=$TOP_DIR/test.d
