[XFS] Refactor xfs_mountfs
Refactoring xfs_mountfs() to call sub-functions for logical chunks can
help save a bit of stack, and can make it easier to read this long
function.
The mount path is one of the longest common callchains, easily getting to
within a few bytes of the end of a 4k stack when over lvm, quotas are
enabled, and quotacheck must be done.
With this change on top of the other stack-related changes I've sent, I
can get xfs to survive a normal xfsqa run on 4k stacks over lvm.
SGI-PV: 971186
SGI-Modid: xfs-linux-melb:xfs-kern:29834a
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Donald Douwsma <donaldd@sgi.com>
Signed-off-by: Tim Shimmin <tes@sgi.com>
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index 6115f37..2806d43 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -733,49 +733,13 @@
}
/*
- * xfs_mountfs
- *
- * This function does the following on an initial mount of a file system:
- * - reads the superblock from disk and init the mount struct
- * - if we're a 32-bit kernel, do a size check on the superblock
- * so we don't mount terabyte filesystems
- * - init mount struct realtime fields
- * - allocate inode hash table for fs
- * - init directory manager
- * - perform recovery and init the log manager
+ * Update alignment values based on mount options and sb values
*/
-int
-xfs_mountfs(
- xfs_mount_t *mp,
- int mfsi_flags)
+STATIC int
+xfs_update_alignment(xfs_mount_t *mp, int mfsi_flags, __uint64_t *update_flags)
{
- xfs_buf_t *bp;
xfs_sb_t *sbp = &(mp->m_sb);
- xfs_inode_t *rip;
- bhv_vnode_t *rvp = NULL;
- int readio_log, writeio_log;
- xfs_daddr_t d;
- __uint64_t resblks;
- __int64_t update_flags;
- uint quotamount, quotaflags;
- int agno;
- int uuid_mounted = 0;
- int error = 0;
- if (mp->m_sb_bp == NULL) {
- if ((error = xfs_readsb(mp, mfsi_flags))) {
- return error;
- }
- }
- xfs_mount_common(mp, sbp);
-
- /*
- * Check if sb_agblocks is aligned at stripe boundary
- * If sb_agblocks is NOT aligned turn off m_dalign since
- * allocator alignment is within an ag, therefore ag has
- * to be aligned at stripe boundary.
- */
- update_flags = 0LL;
if (mp->m_dalign && !(mfsi_flags & XFS_MFSI_SECOND)) {
/*
* If stripe unit and stripe width are not multiples
@@ -786,8 +750,7 @@
if (mp->m_flags & XFS_MOUNT_RETERR) {
cmn_err(CE_WARN,
"XFS: alignment check 1 failed");
- error = XFS_ERROR(EINVAL);
- goto error1;
+ return XFS_ERROR(EINVAL);
}
mp->m_dalign = mp->m_swidth = 0;
} else {
@@ -797,8 +760,7 @@
mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
if (mp->m_flags & XFS_MOUNT_RETERR) {
- error = XFS_ERROR(EINVAL);
- goto error1;
+ return XFS_ERROR(EINVAL);
}
xfs_fs_cmn_err(CE_WARN, mp,
"stripe alignment turned off: sunit(%d)/swidth(%d) incompatible with agsize(%d)",
@@ -815,8 +777,7 @@
"stripe alignment turned off: sunit(%d) less than bsize(%d)",
mp->m_dalign,
mp->m_blockmask +1);
- error = XFS_ERROR(EINVAL);
- goto error1;
+ return XFS_ERROR(EINVAL);
}
mp->m_swidth = 0;
}
@@ -829,11 +790,11 @@
if (XFS_SB_VERSION_HASDALIGN(sbp)) {
if (sbp->sb_unit != mp->m_dalign) {
sbp->sb_unit = mp->m_dalign;
- update_flags |= XFS_SB_UNIT;
+ *update_flags |= XFS_SB_UNIT;
}
if (sbp->sb_width != mp->m_swidth) {
sbp->sb_width = mp->m_swidth;
- update_flags |= XFS_SB_WIDTH;
+ *update_flags |= XFS_SB_WIDTH;
}
}
} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
@@ -842,49 +803,45 @@
mp->m_swidth = sbp->sb_width;
}
- xfs_alloc_compute_maxlevels(mp);
- xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
- xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
- xfs_ialloc_compute_maxlevels(mp);
+ return 0;
+}
+
+/*
+ * Set the maximum inode count for this filesystem
+ */
+STATIC void
+xfs_set_maxicount(xfs_mount_t *mp)
+{
+ xfs_sb_t *sbp = &(mp->m_sb);
+ __uint64_t icount;
if (sbp->sb_imax_pct) {
- __uint64_t icount;
-
- /* Make sure the maximum inode count is a multiple of the
- * units we allocate inodes in.
+ /*
+ * Make sure the maximum inode count is a multiple
+ * of the units we allocate inodes in.
*/
-
icount = sbp->sb_dblocks * sbp->sb_imax_pct;
do_div(icount, 100);
do_div(icount, mp->m_ialloc_blks);
mp->m_maxicount = (icount * mp->m_ialloc_blks) <<
sbp->sb_inopblog;
- } else
+ } else {
mp->m_maxicount = 0;
-
- mp->m_maxioffset = xfs_max_file_offset(sbp->sb_blocklog);
-
- /*
- * XFS uses the uuid from the superblock as the unique
- * identifier for fsid. We can not use the uuid from the volume
- * since a single partition filesystem is identical to a single
- * partition volume/filesystem.
- */
- if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
- (mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
- if (xfs_uuid_mount(mp)) {
- error = XFS_ERROR(EINVAL);
- goto error1;
- }
- uuid_mounted=1;
}
+}
- /*
- * Set the default minimum read and write sizes unless
- * already specified in a mount option.
- * We use smaller I/O sizes when the file system
- * is being used for NFS service (wsync mount option).
- */
+/*
+ * Set the default minimum read and write sizes unless
+ * already specified in a mount option.
+ * We use smaller I/O sizes when the file system
+ * is being used for NFS service (wsync mount option).
+ */
+STATIC void
+xfs_set_rw_sizes(xfs_mount_t *mp)
+{
+ xfs_sb_t *sbp = &(mp->m_sb);
+ int readio_log, writeio_log;
+
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)) {
if (mp->m_flags & XFS_MOUNT_WSYNC) {
readio_log = XFS_WSYNC_READIO_LOG;
@@ -910,17 +867,14 @@
mp->m_writeio_log = writeio_log;
}
mp->m_writeio_blocks = 1 << (mp->m_writeio_log - sbp->sb_blocklog);
+}
- /*
- * Set the inode cluster size.
- * This may still be overridden by the file system
- * block size if it is larger than the chosen cluster size.
- */
- mp->m_inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
-
- /*
- * Set whether we're using inode alignment.
- */
+/*
+ * Set whether we're using inode alignment.
+ */
+STATIC void
+xfs_set_inoalignment(xfs_mount_t *mp)
+{
if (XFS_SB_VERSION_HASALIGN(&mp->m_sb) &&
mp->m_sb.sb_inoalignmt >=
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size))
@@ -936,14 +890,22 @@
mp->m_sinoalign = mp->m_dalign;
else
mp->m_sinoalign = 0;
- /*
- * Check that the data (and log if separate) are an ok size.
- */
+}
+
+/*
+ * Check that the data (and log if separate) are an ok size.
+ */
+STATIC int
+xfs_check_sizes(xfs_mount_t *mp, int mfsi_flags)
+{
+ xfs_buf_t *bp;
+ xfs_daddr_t d;
+ int error;
+
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_dblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_dblocks) {
cmn_err(CE_WARN, "XFS: size check 1 failed");
- error = XFS_ERROR(E2BIG);
- goto error1;
+ return XFS_ERROR(E2BIG);
}
error = xfs_read_buf(mp, mp->m_ddev_targp,
d - XFS_FSS_TO_BB(mp, 1),
@@ -952,10 +914,9 @@
xfs_buf_relse(bp);
} else {
cmn_err(CE_WARN, "XFS: size check 2 failed");
- if (error == ENOSPC) {
+ if (error == ENOSPC)
error = XFS_ERROR(E2BIG);
- }
- goto error1;
+ return error;
}
if (((mfsi_flags & XFS_MFSI_CLIENT) == 0) &&
@@ -963,8 +924,7 @@
d = (xfs_daddr_t)XFS_FSB_TO_BB(mp, mp->m_sb.sb_logblocks);
if (XFS_BB_TO_FSB(mp, d) != mp->m_sb.sb_logblocks) {
cmn_err(CE_WARN, "XFS: size check 3 failed");
- error = XFS_ERROR(E2BIG);
- goto error1;
+ return XFS_ERROR(E2BIG);
}
error = xfs_read_buf(mp, mp->m_logdev_targp,
d - XFS_FSB_TO_BB(mp, 1),
@@ -973,17 +933,111 @@
xfs_buf_relse(bp);
} else {
cmn_err(CE_WARN, "XFS: size check 3 failed");
- if (error == ENOSPC) {
+ if (error == ENOSPC)
error = XFS_ERROR(E2BIG);
- }
- goto error1;
+ return error;
}
}
+ return 0;
+}
+
+/*
+ * xfs_mountfs
+ *
+ * This function does the following on an initial mount of a file system:
+ * - reads the superblock from disk and init the mount struct
+ * - if we're a 32-bit kernel, do a size check on the superblock
+ * so we don't mount terabyte filesystems
+ * - init mount struct realtime fields
+ * - allocate inode hash table for fs
+ * - init directory manager
+ * - perform recovery and init the log manager
+ */
+int
+xfs_mountfs(
+ xfs_mount_t *mp,
+ int mfsi_flags)
+{
+ xfs_sb_t *sbp = &(mp->m_sb);
+ xfs_inode_t *rip;
+ bhv_vnode_t *rvp = NULL;
+ __uint64_t resblks;
+ __int64_t update_flags = 0LL;
+ uint quotamount, quotaflags;
+ int agno;
+ int uuid_mounted = 0;
+ int error = 0;
+
+ if (mp->m_sb_bp == NULL) {
+ error = xfs_readsb(mp, mfsi_flags);
+ if (error)
+ return error;
+ }
+ xfs_mount_common(mp, sbp);
+
+ /*
+ * Check if sb_agblocks is aligned at stripe boundary
+ * If sb_agblocks is NOT aligned turn off m_dalign since
+ * allocator alignment is within an ag, therefore ag has
+ * to be aligned at stripe boundary.
+ */
+ error = xfs_update_alignment(mp, mfsi_flags, &update_flags);
+ if (error)
+ goto error1;
+
+ xfs_alloc_compute_maxlevels(mp);
+ xfs_bmap_compute_maxlevels(mp, XFS_DATA_FORK);
+ xfs_bmap_compute_maxlevels(mp, XFS_ATTR_FORK);
+ xfs_ialloc_compute_maxlevels(mp);
+
+ xfs_set_maxicount(mp);
+
+ mp->m_maxioffset = xfs_max_file_offset(sbp->sb_blocklog);
+
+ /*
+ * XFS uses the uuid from the superblock as the unique
+ * identifier for fsid. We can not use the uuid from the volume
+ * since a single partition filesystem is identical to a single
+ * partition volume/filesystem.
+ */
+ if ((mfsi_flags & XFS_MFSI_SECOND) == 0 &&
+ (mp->m_flags & XFS_MOUNT_NOUUID) == 0) {
+ if (xfs_uuid_mount(mp)) {
+ error = XFS_ERROR(EINVAL);
+ goto error1;
+ }
+ uuid_mounted=1;
+ }
+
+ /*
+ * Set the minimum read and write sizes
+ */
+ xfs_set_rw_sizes(mp);
+
+ /*
+ * Set the inode cluster size.
+ * This may still be overridden by the file system
+ * block size if it is larger than the chosen cluster size.
+ */
+ mp->m_inode_cluster_size = XFS_INODE_BIG_CLUSTER_SIZE;
+
+ /*
+ * Set inode alignment fields
+ */
+ xfs_set_inoalignment(mp);
+
+ /*
+ * Check that the data (and log if separate) are an ok size.
+ */
+ error = xfs_check_sizes(mp, mfsi_flags);
+ if (error)
+ goto error1;
/*
* Initialize realtime fields in the mount structure
*/
- if ((error = xfs_rtmount_init(mp))) {
+ error = xfs_rtmount_init(mp);
+ if (error) {
cmn_err(CE_WARN, "XFS: RT mount failed");
goto error1;
}
@@ -1101,7 +1155,8 @@
/*
* Initialize realtime inode pointers in the mount structure
*/
- if ((error = xfs_rtmount_inodes(mp))) {
+ error = xfs_rtmount_inodes(mp);
+ if (error) {
/*
* Free up the root inode.
*/
@@ -1119,7 +1174,8 @@
/*
* Initialise the XFS quota management subsystem for this mount
*/
- if ((error = XFS_QM_INIT(mp, "amount, "aflags)))
+ error = XFS_QM_INIT(mp, "amount, "aflags);
+ if (error)
goto error4;
/*
@@ -1136,7 +1192,8 @@
/*
* Complete the quota initialisation, post-log-replay component.
*/
- if ((error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags)))
+ error = XFS_QM_MOUNT(mp, quotamount, quotaflags, mfsi_flags);
+ if (error)
goto error4;
/*
