sparc: convert to arch_gettimeoffset()
This patch converts sparc (specifically sparc32) to use GENERIC_TIME via
the arch_getoffset() infrastructure, reducing the amount of arch
specific code we need to maintain.
The sparc architecture is one of the last 3 arches that need to be
converted.
This patch applies on top of Linus' current -git tree
I've taken my best swing at converting this, but I'm not 100% confident
I got it right. My cross-compiler is now out of date (gcc4.2) so I
wasn't able to check if it compiled. Any assistance from arch
maintainers or testers to get this merged would be great.
Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/arch/sparc/kernel/time_32.c b/arch/sparc/kernel/time_32.c
index 5b2f595..0d4c09b 100644
--- a/arch/sparc/kernel/time_32.c
+++ b/arch/sparc/kernel/time_32.c
@@ -35,6 +35,7 @@
#include <linux/platform_device.h>
#include <asm/oplib.h>
+#include <asm/timex.h>
#include <asm/timer.h>
#include <asm/system.h>
#include <asm/irq.h>
@@ -51,7 +52,6 @@
EXPORT_SYMBOL(rtc_lock);
static int set_rtc_mmss(unsigned long);
-static int sbus_do_settimeofday(struct timespec *tv);
unsigned long profile_pc(struct pt_regs *regs)
{
@@ -76,6 +76,8 @@
__volatile__ unsigned int *master_l10_counter;
+u32 (*do_arch_gettimeoffset)(void);
+
/*
* timer_interrupt() needs to keep up the real-time clock,
* as well as call the "do_timer()" routine every clocktick
@@ -196,17 +198,37 @@
{
return of_register_driver(&clock_driver, &of_platform_bus_type);
}
-
/* Must be after subsys_initcall() so that busses are probed. Must
* be before device_initcall() because things like the RTC driver
* need to see the clock registers.
*/
fs_initcall(clock_init);
+
+u32 sbus_do_gettimeoffset(void)
+{
+ unsigned long val = *master_l10_counter;
+ unsigned long usec = (val >> 10) & 0x1fffff;
+
+ /* Limit hit? */
+ if (val & 0x80000000)
+ usec += 1000000 / HZ;
+
+ return usec * 1000;
+}
+
+
+u32 arch_gettimeoffset(void)
+{
+ if (unlikely(!do_arch_gettimeoffset))
+ return 0;
+ return do_arch_gettimeoffset();
+}
+
static void __init sbus_time_init(void)
{
+ do_arch_gettimeoffset = sbus_do_gettimeoffset;
- BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM);
btfixup();
sparc_init_timers(timer_interrupt);
@@ -224,94 +246,6 @@
sbus_time_init();
}
-static inline unsigned long do_gettimeoffset(void)
-{
- unsigned long val = *master_l10_counter;
- unsigned long usec = (val >> 10) & 0x1fffff;
-
- /* Limit hit? */
- if (val & 0x80000000)
- usec += 1000000 / HZ;
-
- return usec;
-}
-
-/* Ok, my cute asm atomicity trick doesn't work anymore.
- * There are just too many variables that need to be protected
- * now (both members of xtime, et al.)
- */
-void do_gettimeofday(struct timeval *tv)
-{
- unsigned long flags;
- unsigned long seq;
- unsigned long usec, sec;
- unsigned long max_ntp_tick = tick_usec - tickadj;
-
- do {
- seq = read_seqbegin_irqsave(&xtime_lock, flags);
- usec = do_gettimeoffset();
-
- /*
- * If time_adjust is negative then NTP is slowing the clock
- * so make sure not to go into next possible interval.
- * Better to lose some accuracy than have time go backwards..
- */
- if (unlikely(time_adjust < 0))
- usec = min(usec, max_ntp_tick);
-
- sec = xtime.tv_sec;
- usec += (xtime.tv_nsec / 1000);
- } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
-
- while (usec >= 1000000) {
- usec -= 1000000;
- sec++;
- }
-
- tv->tv_sec = sec;
- tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
- int ret;
-
- write_seqlock_irq(&xtime_lock);
- ret = bus_do_settimeofday(tv);
- write_sequnlock_irq(&xtime_lock);
- clock_was_set();
- return ret;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
-static int sbus_do_settimeofday(struct timespec *tv)
-{
- time_t wtm_sec, sec = tv->tv_sec;
- long wtm_nsec, nsec = tv->tv_nsec;
-
- if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
- return -EINVAL;
-
- /*
- * This is revolting. We need to set "xtime" correctly. However, the
- * value in this location is the value at the most recent update of
- * wall time. Discover what correction gettimeofday() would have
- * made, and then undo it!
- */
- nsec -= 1000 * do_gettimeoffset();
-
- wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
- wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
- set_normalized_timespec(&xtime, sec, nsec);
- set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
- ntp_clear();
- return 0;
-}
static int set_rtc_mmss(unsigned long secs)
{
