blob: 581278c5848877ea1a90cfdbf8045afd23298c0c [file] [log] [blame]
#!/usr/bin/python
#
# top-like utility for displaying kvm statistics
#
# Copyright 2006-2008 Qumranet Technologies
# Copyright 2008-2011 Red Hat, Inc.
#
# Authors:
# Avi Kivity <avi@redhat.com>
#
# This work is licensed under the terms of the GNU GPL, version 2. See
# the COPYING file in the top-level directory.
"""The kvm_stat module outputs statistics about running KVM VMs
Three different ways of output formatting are available:
- as a top-like text ui
- in a key -> value format
- in an all keys, all values format
The data is sampled from the KVM's debugfs entries and its perf events.
"""
import curses
import sys
import os
import time
import optparse
import ctypes
import fcntl
import resource
import struct
import re
from collections import defaultdict
from time import sleep
VMX_EXIT_REASONS = {
'EXCEPTION_NMI': 0,
'EXTERNAL_INTERRUPT': 1,
'TRIPLE_FAULT': 2,
'PENDING_INTERRUPT': 7,
'NMI_WINDOW': 8,
'TASK_SWITCH': 9,
'CPUID': 10,
'HLT': 12,
'INVLPG': 14,
'RDPMC': 15,
'RDTSC': 16,
'VMCALL': 18,
'VMCLEAR': 19,
'VMLAUNCH': 20,
'VMPTRLD': 21,
'VMPTRST': 22,
'VMREAD': 23,
'VMRESUME': 24,
'VMWRITE': 25,
'VMOFF': 26,
'VMON': 27,
'CR_ACCESS': 28,
'DR_ACCESS': 29,
'IO_INSTRUCTION': 30,
'MSR_READ': 31,
'MSR_WRITE': 32,
'INVALID_STATE': 33,
'MWAIT_INSTRUCTION': 36,
'MONITOR_INSTRUCTION': 39,
'PAUSE_INSTRUCTION': 40,
'MCE_DURING_VMENTRY': 41,
'TPR_BELOW_THRESHOLD': 43,
'APIC_ACCESS': 44,
'EPT_VIOLATION': 48,
'EPT_MISCONFIG': 49,
'WBINVD': 54,
'XSETBV': 55,
'APIC_WRITE': 56,
'INVPCID': 58,
}
SVM_EXIT_REASONS = {
'READ_CR0': 0x000,
'READ_CR3': 0x003,
'READ_CR4': 0x004,
'READ_CR8': 0x008,
'WRITE_CR0': 0x010,
'WRITE_CR3': 0x013,
'WRITE_CR4': 0x014,
'WRITE_CR8': 0x018,
'READ_DR0': 0x020,
'READ_DR1': 0x021,
'READ_DR2': 0x022,
'READ_DR3': 0x023,
'READ_DR4': 0x024,
'READ_DR5': 0x025,
'READ_DR6': 0x026,
'READ_DR7': 0x027,
'WRITE_DR0': 0x030,
'WRITE_DR1': 0x031,
'WRITE_DR2': 0x032,
'WRITE_DR3': 0x033,
'WRITE_DR4': 0x034,
'WRITE_DR5': 0x035,
'WRITE_DR6': 0x036,
'WRITE_DR7': 0x037,
'EXCP_BASE': 0x040,
'INTR': 0x060,
'NMI': 0x061,
'SMI': 0x062,
'INIT': 0x063,
'VINTR': 0x064,
'CR0_SEL_WRITE': 0x065,
'IDTR_READ': 0x066,
'GDTR_READ': 0x067,
'LDTR_READ': 0x068,
'TR_READ': 0x069,
'IDTR_WRITE': 0x06a,
'GDTR_WRITE': 0x06b,
'LDTR_WRITE': 0x06c,
'TR_WRITE': 0x06d,
'RDTSC': 0x06e,
'RDPMC': 0x06f,
'PUSHF': 0x070,
'POPF': 0x071,
'CPUID': 0x072,
'RSM': 0x073,
'IRET': 0x074,
'SWINT': 0x075,
'INVD': 0x076,
'PAUSE': 0x077,
'HLT': 0x078,
'INVLPG': 0x079,
'INVLPGA': 0x07a,
'IOIO': 0x07b,
'MSR': 0x07c,
'TASK_SWITCH': 0x07d,
'FERR_FREEZE': 0x07e,
'SHUTDOWN': 0x07f,
'VMRUN': 0x080,
'VMMCALL': 0x081,
'VMLOAD': 0x082,
'VMSAVE': 0x083,
'STGI': 0x084,
'CLGI': 0x085,
'SKINIT': 0x086,
'RDTSCP': 0x087,
'ICEBP': 0x088,
'WBINVD': 0x089,
'MONITOR': 0x08a,
'MWAIT': 0x08b,
'MWAIT_COND': 0x08c,
'XSETBV': 0x08d,
'NPF': 0x400,
}
# EC definition of HSR (from arch/arm64/include/asm/kvm_arm.h)
AARCH64_EXIT_REASONS = {
'UNKNOWN': 0x00,
'WFI': 0x01,
'CP15_32': 0x03,
'CP15_64': 0x04,
'CP14_MR': 0x05,
'CP14_LS': 0x06,
'FP_ASIMD': 0x07,
'CP10_ID': 0x08,
'CP14_64': 0x0C,
'ILL_ISS': 0x0E,
'SVC32': 0x11,
'HVC32': 0x12,
'SMC32': 0x13,
'SVC64': 0x15,
'HVC64': 0x16,
'SMC64': 0x17,
'SYS64': 0x18,
'IABT': 0x20,
'IABT_HYP': 0x21,
'PC_ALIGN': 0x22,
'DABT': 0x24,
'DABT_HYP': 0x25,
'SP_ALIGN': 0x26,
'FP_EXC32': 0x28,
'FP_EXC64': 0x2C,
'SERROR': 0x2F,
'BREAKPT': 0x30,
'BREAKPT_HYP': 0x31,
'SOFTSTP': 0x32,
'SOFTSTP_HYP': 0x33,
'WATCHPT': 0x34,
'WATCHPT_HYP': 0x35,
'BKPT32': 0x38,
'VECTOR32': 0x3A,
'BRK64': 0x3C,
}
# From include/uapi/linux/kvm.h, KVM_EXIT_xxx
USERSPACE_EXIT_REASONS = {
'UNKNOWN': 0,
'EXCEPTION': 1,
'IO': 2,
'HYPERCALL': 3,
'DEBUG': 4,
'HLT': 5,
'MMIO': 6,
'IRQ_WINDOW_OPEN': 7,
'SHUTDOWN': 8,
'FAIL_ENTRY': 9,
'INTR': 10,
'SET_TPR': 11,
'TPR_ACCESS': 12,
'S390_SIEIC': 13,
'S390_RESET': 14,
'DCR': 15,
'NMI': 16,
'INTERNAL_ERROR': 17,
'OSI': 18,
'PAPR_HCALL': 19,
'S390_UCONTROL': 20,
'WATCHDOG': 21,
'S390_TSCH': 22,
'EPR': 23,
'SYSTEM_EVENT': 24,
}
IOCTL_NUMBERS = {
'SET_FILTER': 0x40082406,
'ENABLE': 0x00002400,
'DISABLE': 0x00002401,
'RESET': 0x00002403,
}
class Arch(object):
"""Encapsulates global architecture specific data.
Contains the performance event open syscall and ioctl numbers, as
well as the VM exit reasons for the architecture it runs on.
"""
@staticmethod
def get_arch():
machine = os.uname()[4]
if machine.startswith('ppc'):
return ArchPPC()
elif machine.startswith('aarch64'):
return ArchA64()
elif machine.startswith('s390'):
return ArchS390()
else:
# X86_64
for line in open('/proc/cpuinfo'):
if not line.startswith('flags'):
continue
flags = line.split()
if 'vmx' in flags:
return ArchX86(VMX_EXIT_REASONS)
if 'svm' in flags:
return ArchX86(SVM_EXIT_REASONS)
return
class ArchX86(Arch):
def __init__(self, exit_reasons):
self.sc_perf_evt_open = 298
self.ioctl_numbers = IOCTL_NUMBERS
self.exit_reasons = exit_reasons
class ArchPPC(Arch):
def __init__(self):
self.sc_perf_evt_open = 319
self.ioctl_numbers = IOCTL_NUMBERS
self.ioctl_numbers['ENABLE'] = 0x20002400
self.ioctl_numbers['DISABLE'] = 0x20002401
self.ioctl_numbers['RESET'] = 0x20002403
# PPC comes in 32 and 64 bit and some generated ioctl
# numbers depend on the wordsize.
char_ptr_size = ctypes.sizeof(ctypes.c_char_p)
self.ioctl_numbers['SET_FILTER'] = 0x80002406 | char_ptr_size << 16
self.exit_reasons = {}
class ArchA64(Arch):
def __init__(self):
self.sc_perf_evt_open = 241
self.ioctl_numbers = IOCTL_NUMBERS
self.exit_reasons = AARCH64_EXIT_REASONS
class ArchS390(Arch):
def __init__(self):
self.sc_perf_evt_open = 331
self.ioctl_numbers = IOCTL_NUMBERS
self.exit_reasons = None
ARCH = Arch.get_arch()
def walkdir(path):
"""Returns os.walk() data for specified directory.
As it is only a wrapper it returns the same 3-tuple of (dirpath,
dirnames, filenames).
"""
return next(os.walk(path))
def parse_int_list(list_string):
"""Returns an int list from a string of comma separated integers and
integer ranges."""
integers = []
members = list_string.split(',')
for member in members:
if '-' not in member:
integers.append(int(member))
else:
int_range = member.split('-')
integers.extend(range(int(int_range[0]),
int(int_range[1]) + 1))
return integers
def get_online_cpus():
"""Returns a list of cpu id integers."""
with open('/sys/devices/system/cpu/online') as cpu_list:
cpu_string = cpu_list.readline()
return parse_int_list(cpu_string)
def get_filters():
"""Returns a dict of trace events, their filter ids and
the values that can be filtered.
Trace events can be filtered for special values by setting a
filter string via an ioctl. The string normally has the format
identifier==value. For each filter a new event will be created, to
be able to distinguish the events.
"""
filters = {}
filters['kvm_userspace_exit'] = ('reason', USERSPACE_EXIT_REASONS)
if ARCH.exit_reasons:
filters['kvm_exit'] = ('exit_reason', ARCH.exit_reasons)
return filters
libc = ctypes.CDLL('libc.so.6', use_errno=True)
syscall = libc.syscall
class perf_event_attr(ctypes.Structure):
"""Struct that holds the necessary data to set up a trace event.
For an extensive explanation see perf_event_open(2) and
include/uapi/linux/perf_event.h, struct perf_event_attr
All fields that are not initialized in the constructor are 0.
"""
_fields_ = [('type', ctypes.c_uint32),
('size', ctypes.c_uint32),
('config', ctypes.c_uint64),
('sample_freq', ctypes.c_uint64),
('sample_type', ctypes.c_uint64),
('read_format', ctypes.c_uint64),
('flags', ctypes.c_uint64),
('wakeup_events', ctypes.c_uint32),
('bp_type', ctypes.c_uint32),
('bp_addr', ctypes.c_uint64),
('bp_len', ctypes.c_uint64),
]
def __init__(self):
super(self.__class__, self).__init__()
self.type = PERF_TYPE_TRACEPOINT
self.size = ctypes.sizeof(self)
self.read_format = PERF_FORMAT_GROUP
def perf_event_open(attr, pid, cpu, group_fd, flags):
"""Wrapper for the sys_perf_evt_open() syscall.
Used to set up performance events, returns a file descriptor or -1
on error.
Attributes are:
- syscall number
- struct perf_event_attr *
- pid or -1 to monitor all pids
- cpu number or -1 to monitor all cpus
- The file descriptor of the group leader or -1 to create a group.
- flags
"""
return syscall(ARCH.sc_perf_evt_open, ctypes.pointer(attr),
ctypes.c_int(pid), ctypes.c_int(cpu),
ctypes.c_int(group_fd), ctypes.c_long(flags))
PERF_TYPE_TRACEPOINT = 2
PERF_FORMAT_GROUP = 1 << 3
PATH_DEBUGFS_TRACING = '/sys/kernel/debug/tracing'
PATH_DEBUGFS_KVM = '/sys/kernel/debug/kvm'
class Group(object):
"""Represents a perf event group."""
def __init__(self):
self.events = []
def add_event(self, event):
self.events.append(event)
def read(self):
"""Returns a dict with 'event name: value' for all events in the
group.
Values are read by reading from the file descriptor of the
event that is the group leader. See perf_event_open(2) for
details.
Read format for the used event configuration is:
struct read_format {
u64 nr; /* The number of events */
struct {
u64 value; /* The value of the event */
} values[nr];
};
"""
length = 8 * (1 + len(self.events))
read_format = 'xxxxxxxx' + 'Q' * len(self.events)
return dict(zip([event.name for event in self.events],
struct.unpack(read_format,
os.read(self.events[0].fd, length))))
class Event(object):
"""Represents a performance event and manages its life cycle."""
def __init__(self, name, group, trace_cpu, trace_pid, trace_point,
trace_filter, trace_set='kvm'):
self.name = name
self.fd = None
self.setup_event(group, trace_cpu, trace_pid, trace_point,
trace_filter, trace_set)
def __del__(self):
"""Closes the event's file descriptor.
As no python file object was created for the file descriptor,
python will not reference count the descriptor and will not
close it itself automatically, so we do it.
"""
if self.fd:
os.close(self.fd)
def setup_event_attribute(self, trace_set, trace_point):
"""Returns an initialized ctype perf_event_attr struct."""
id_path = os.path.join(PATH_DEBUGFS_TRACING, 'events', trace_set,
trace_point, 'id')
event_attr = perf_event_attr()
event_attr.config = int(open(id_path).read())
return event_attr
def setup_event(self, group, trace_cpu, trace_pid, trace_point,
trace_filter, trace_set):
"""Sets up the perf event in Linux.
Issues the syscall to register the event in the kernel and
then sets the optional filter.
"""
event_attr = self.setup_event_attribute(trace_set, trace_point)
# First event will be group leader.
group_leader = -1
# All others have to pass the leader's descriptor instead.
if group.events:
group_leader = group.events[0].fd
fd = perf_event_open(event_attr, trace_pid,
trace_cpu, group_leader, 0)
if fd == -1:
err = ctypes.get_errno()
raise OSError(err, os.strerror(err),
'while calling sys_perf_event_open().')
if trace_filter:
fcntl.ioctl(fd, ARCH.ioctl_numbers['SET_FILTER'],
trace_filter)
self.fd = fd
def enable(self):
"""Enables the trace event in the kernel.
Enabling the group leader makes reading counters from it and the
events under it possible.
"""
fcntl.ioctl(self.fd, ARCH.ioctl_numbers['ENABLE'], 0)
def disable(self):
"""Disables the trace event in the kernel.
Disabling the group leader makes reading all counters under it
impossible.
"""
fcntl.ioctl(self.fd, ARCH.ioctl_numbers['DISABLE'], 0)
def reset(self):
"""Resets the count of the trace event in the kernel."""
fcntl.ioctl(self.fd, ARCH.ioctl_numbers['RESET'], 0)
class TracepointProvider(object):
"""Data provider for the stats class.
Manages the events/groups from which it acquires its data.
"""
def __init__(self):
self.group_leaders = []
self.filters = get_filters()
self._fields = self.get_available_fields()
self._pid = 0
def get_available_fields(self):
"""Returns a list of available event's of format 'event name(filter
name)'.
All available events have directories under
/sys/kernel/debug/tracing/events/ which export information
about the specific event. Therefore, listing the dirs gives us
a list of all available events.
Some events like the vm exit reasons can be filtered for
specific values. To take account for that, the routine below
creates special fields with the following format:
event name(filter name)
"""
path = os.path.join(PATH_DEBUGFS_TRACING, 'events', 'kvm')
fields = walkdir(path)[1]
extra = []
for field in fields:
if field in self.filters:
filter_name_, filter_dicts = self.filters[field]
for name in filter_dicts:
extra.append(field + '(' + name + ')')
fields += extra
return fields
def setup_traces(self):
"""Creates all event and group objects needed to be able to retrieve
data."""
if self._pid > 0:
# Fetch list of all threads of the monitored pid, as qemu
# starts a thread for each vcpu.
path = os.path.join('/proc', str(self._pid), 'task')
groupids = walkdir(path)[1]
else:
groupids = get_online_cpus()
# The constant is needed as a buffer for python libs, std
# streams and other files that the script opens.
newlim = len(groupids) * len(self._fields) + 50
try:
softlim_, hardlim = resource.getrlimit(resource.RLIMIT_NOFILE)
if hardlim < newlim:
# Now we need CAP_SYS_RESOURCE, to increase the hard limit.
resource.setrlimit(resource.RLIMIT_NOFILE, (newlim, newlim))
else:
# Raising the soft limit is sufficient.
resource.setrlimit(resource.RLIMIT_NOFILE, (newlim, hardlim))
except ValueError:
sys.exit("NOFILE rlimit could not be raised to {0}".format(newlim))
for groupid in groupids:
group = Group()
for name in self._fields:
tracepoint = name
tracefilter = None
match = re.match(r'(.*)\((.*)\)', name)
if match:
tracepoint, sub = match.groups()
tracefilter = ('%s==%d\0' %
(self.filters[tracepoint][0],
self.filters[tracepoint][1][sub]))
# From perf_event_open(2):
# pid > 0 and cpu == -1
# This measures the specified process/thread on any CPU.
#
# pid == -1 and cpu >= 0
# This measures all processes/threads on the specified CPU.
trace_cpu = groupid if self._pid == 0 else -1
trace_pid = int(groupid) if self._pid != 0 else -1
group.add_event(Event(name=name,
group=group,
trace_cpu=trace_cpu,
trace_pid=trace_pid,
trace_point=tracepoint,
trace_filter=tracefilter))
self.group_leaders.append(group)
def available_fields(self):
return self.get_available_fields()
@property
def fields(self):
return self._fields
@fields.setter
def fields(self, fields):
"""Enables/disables the (un)wanted events"""
self._fields = fields
for group in self.group_leaders:
for index, event in enumerate(group.events):
if event.name in fields:
event.reset()
event.enable()
else:
# Do not disable the group leader.
# It would disable all of its events.
if index != 0:
event.disable()
@property
def pid(self):
return self._pid
@pid.setter
def pid(self, pid):
"""Changes the monitored pid by setting new traces."""
self._pid = pid
# The garbage collector will get rid of all Event/Group
# objects and open files after removing the references.
self.group_leaders = []
self.setup_traces()
self.fields = self._fields
def read(self):
"""Returns 'event name: current value' for all enabled events."""
ret = defaultdict(int)
for group in self.group_leaders:
for name, val in group.read().iteritems():
if name in self._fields:
ret[name] += val
return ret
class DebugfsProvider(object):
"""Provides data from the files that KVM creates in the kvm debugfs
folder."""
def __init__(self):
self._fields = self.get_available_fields()
self._pid = 0
self.do_read = True
def get_available_fields(self):
""""Returns a list of available fields.
The fields are all available KVM debugfs files
"""
return walkdir(PATH_DEBUGFS_KVM)[2]
@property
def fields(self):
return self._fields
@fields.setter
def fields(self, fields):
self._fields = fields
@property
def pid(self):
return self._pid
@pid.setter
def pid(self, pid):
if pid != 0:
self._pid = pid
vms = walkdir(PATH_DEBUGFS_KVM)[1]
if len(vms) == 0:
self.do_read = False
self.paths = filter(lambda x: "{}-".format(pid) in x, vms)
else:
self.paths = ['']
self.do_read = True
def read(self):
"""Returns a dict with format:'file name / field -> current value'."""
results = {}
# If no debugfs filtering support is available, then don't read.
if not self.do_read:
return results
for path in self.paths:
for field in self._fields:
results[field] = results.get(field, 0) \
+ self.read_field(field, path)
return results
def read_field(self, field, path):
"""Returns the value of a single field from a specific VM."""
try:
return int(open(os.path.join(PATH_DEBUGFS_KVM,
path,
field))
.read())
except IOError:
return 0
class Stats(object):
"""Manages the data providers and the data they provide.
It is used to set filters on the provider's data and collect all
provider data.
"""
def __init__(self, providers, pid, fields=None):
self.providers = providers
self._pid_filter = pid
self._fields_filter = fields
self.values = {}
self.update_provider_pid()
self.update_provider_filters()
def update_provider_filters(self):
"""Propagates fields filters to providers."""
def wanted(key):
if not self._fields_filter:
return True
return re.match(self._fields_filter, key) is not None
# As we reset the counters when updating the fields we can
# also clear the cache of old values.
self.values = {}
for provider in self.providers:
provider_fields = [key for key in provider.get_available_fields()
if wanted(key)]
provider.fields = provider_fields
def update_provider_pid(self):
"""Propagates pid filters to providers."""
for provider in self.providers:
provider.pid = self._pid_filter
@property
def fields_filter(self):
return self._fields_filter
@fields_filter.setter
def fields_filter(self, fields_filter):
self._fields_filter = fields_filter
self.update_provider_filters()
@property
def pid_filter(self):
return self._pid_filter
@pid_filter.setter
def pid_filter(self, pid):
self._pid_filter = pid
self.values = {}
self.update_provider_pid()
def get(self):
"""Returns a dict with field -> (value, delta to last value) of all
provider data."""
for provider in self.providers:
new = provider.read()
for key in provider.fields:
oldval = self.values.get(key, (0, 0))
newval = new.get(key, 0)
newdelta = None
if oldval is not None:
newdelta = newval - oldval[0]
self.values[key] = (newval, newdelta)
return self.values
LABEL_WIDTH = 40
NUMBER_WIDTH = 10
class Tui(object):
"""Instruments curses to draw a nice text ui."""
def __init__(self, stats):
self.stats = stats
self.screen = None
self.drilldown = False
self.update_drilldown()
def __enter__(self):
"""Initialises curses for later use. Based on curses.wrapper
implementation from the Python standard library."""
self.screen = curses.initscr()
curses.noecho()
curses.cbreak()
# The try/catch works around a minor bit of
# over-conscientiousness in the curses module, the error
# return from C start_color() is ignorable.
try:
curses.start_color()
except:
pass
curses.use_default_colors()
return self
def __exit__(self, *exception):
"""Resets the terminal to its normal state. Based on curses.wrappre
implementation from the Python standard library."""
if self.screen:
self.screen.keypad(0)
curses.echo()
curses.nocbreak()
curses.endwin()
def update_drilldown(self):
"""Sets or removes a filter that only allows fields without braces."""
if not self.stats.fields_filter:
self.stats.fields_filter = r'^[^\(]*$'
elif self.stats.fields_filter == r'^[^\(]*$':
self.stats.fields_filter = None
def update_pid(self, pid):
"""Propagates pid selection to stats object."""
self.stats.pid_filter = pid
def refresh(self, sleeptime):
"""Refreshes on-screen data."""
self.screen.erase()
if self.stats.pid_filter > 0:
self.screen.addstr(0, 0, 'kvm statistics - pid {0}'
.format(self.stats.pid_filter),
curses.A_BOLD)
else:
self.screen.addstr(0, 0, 'kvm statistics - summary', curses.A_BOLD)
self.screen.addstr(2, 1, 'Event')
self.screen.addstr(2, 1 + LABEL_WIDTH + NUMBER_WIDTH -
len('Total'), 'Total')
self.screen.addstr(2, 1 + LABEL_WIDTH + NUMBER_WIDTH + 8 -
len('Current'), 'Current')
row = 3
stats = self.stats.get()
def sortkey(x):
if stats[x][1]:
return (-stats[x][1], -stats[x][0])
else:
return (0, -stats[x][0])
for key in sorted(stats.keys(), key=sortkey):
if row >= self.screen.getmaxyx()[0]:
break
values = stats[key]
if not values[0] and not values[1]:
break
col = 1
self.screen.addstr(row, col, key)
col += LABEL_WIDTH
self.screen.addstr(row, col, '%10d' % (values[0],))
col += NUMBER_WIDTH
if values[1] is not None:
self.screen.addstr(row, col, '%8d' % (values[1] / sleeptime,))
row += 1
self.screen.refresh()
def show_filter_selection(self):
"""Draws filter selection mask.
Asks for a valid regex and sets the fields filter accordingly.
"""
while True:
self.screen.erase()
self.screen.addstr(0, 0,
"Show statistics for events matching a regex.",
curses.A_BOLD)
self.screen.addstr(2, 0,
"Current regex: {0}"
.format(self.stats.fields_filter))
self.screen.addstr(3, 0, "New regex: ")
curses.echo()
regex = self.screen.getstr()
curses.noecho()
if len(regex) == 0:
return
try:
re.compile(regex)
self.stats.fields_filter = regex
return
except re.error:
continue
def show_vm_selection(self):
"""Draws PID selection mask.
Asks for a pid until a valid pid or 0 has been entered.
"""
while True:
self.screen.erase()
self.screen.addstr(0, 0,
'Show statistics for specific pid.',
curses.A_BOLD)
self.screen.addstr(1, 0,
'This might limit the shown data to the trace '
'statistics.')
curses.echo()
self.screen.addstr(3, 0, "Pid [0 or pid]: ")
pid = self.screen.getstr()
curses.noecho()
try:
pid = int(pid)
if pid == 0:
self.update_pid(pid)
break
else:
if not os.path.isdir(os.path.join('/proc/', str(pid))):
continue
else:
self.update_pid(pid)
break
except ValueError:
continue
def show_stats(self):
"""Refreshes the screen and processes user input."""
sleeptime = 0.25
while True:
self.refresh(sleeptime)
curses.halfdelay(int(sleeptime * 10))
sleeptime = 3
try:
char = self.screen.getkey()
if char == 'x':
self.drilldown = not self.drilldown
self.update_drilldown()
if char == 'q':
break
if char == 'f':
self.show_filter_selection()
if char == 'p':
self.show_vm_selection()
except KeyboardInterrupt:
break
except curses.error:
continue
def batch(stats):
"""Prints statistics in a key, value format."""
s = stats.get()
time.sleep(1)
s = stats.get()
for key in sorted(s.keys()):
values = s[key]
print '%-42s%10d%10d' % (key, values[0], values[1])
def log(stats):
"""Prints statistics as reiterating key block, multiple value blocks."""
keys = sorted(stats.get().iterkeys())
def banner():
for k in keys:
print '%s' % k,
print
def statline():
s = stats.get()
for k in keys:
print ' %9d' % s[k][1],
print
line = 0
banner_repeat = 20
while True:
time.sleep(1)
if line % banner_repeat == 0:
banner()
statline()
line += 1
def get_options():
"""Returns processed program arguments."""
description_text = """
This script displays various statistics about VMs running under KVM.
The statistics are gathered from the KVM debugfs entries and / or the
currently available perf traces.
The monitoring takes additional cpu cycles and might affect the VM's
performance.
Requirements:
- Access to:
/sys/kernel/debug/kvm
/sys/kernel/debug/trace/events/*
/proc/pid/task
- /proc/sys/kernel/perf_event_paranoid < 1 if user has no
CAP_SYS_ADMIN and perf events are used.
- CAP_SYS_RESOURCE if the hard limit is not high enough to allow
the large number of files that are possibly opened.
"""
class PlainHelpFormatter(optparse.IndentedHelpFormatter):
def format_description(self, description):
if description:
return description + "\n"
else:
return ""
optparser = optparse.OptionParser(description=description_text,
formatter=PlainHelpFormatter())
optparser.add_option('-1', '--once', '--batch',
action='store_true',
default=False,
dest='once',
help='run in batch mode for one second',
)
optparser.add_option('-l', '--log',
action='store_true',
default=False,
dest='log',
help='run in logging mode (like vmstat)',
)
optparser.add_option('-t', '--tracepoints',
action='store_true',
default=False,
dest='tracepoints',
help='retrieve statistics from tracepoints',
)
optparser.add_option('-d', '--debugfs',
action='store_true',
default=False,
dest='debugfs',
help='retrieve statistics from debugfs',
)
optparser.add_option('-f', '--fields',
action='store',
default=None,
dest='fields',
help='fields to display (regex)',
)
optparser.add_option('-p', '--pid',
action='store',
default=0,
type=int,
dest='pid',
help='restrict statistics to pid',
)
(options, _) = optparser.parse_args(sys.argv)
return options
def get_providers(options):
"""Returns a list of data providers depending on the passed options."""
providers = []
if options.tracepoints:
providers.append(TracepointProvider())
if options.debugfs:
providers.append(DebugfsProvider())
if len(providers) == 0:
providers.append(TracepointProvider())
return providers
def check_access(options):
"""Exits if the current user can't access all needed directories."""
if not os.path.exists('/sys/kernel/debug'):
sys.stderr.write('Please enable CONFIG_DEBUG_FS in your kernel.')
sys.exit(1)
if not os.path.exists(PATH_DEBUGFS_KVM):
sys.stderr.write("Please make sure, that debugfs is mounted and "
"readable by the current user:\n"
"('mount -t debugfs debugfs /sys/kernel/debug')\n"
"Also ensure, that the kvm modules are loaded.\n")
sys.exit(1)
if not os.path.exists(PATH_DEBUGFS_TRACING) and (options.tracepoints
or not options.debugfs):
sys.stderr.write("Please enable CONFIG_TRACING in your kernel "
"when using the option -t (default).\n"
"If it is enabled, make {0} readable by the "
"current user.\n"
.format(PATH_DEBUGFS_TRACING))
if options.tracepoints:
sys.exit(1)
sys.stderr.write("Falling back to debugfs statistics!\n")
options.debugfs = True
sleep(5)
return options
def main():
options = get_options()
options = check_access(options)
if (options.pid > 0 and
not os.path.isdir(os.path.join('/proc/',
str(options.pid)))):
sys.stderr.write('Did you use a (unsupported) tid instead of a pid?\n')
sys.exit('Specified pid does not exist.')
providers = get_providers(options)
stats = Stats(providers, options.pid, fields=options.fields)
if options.log:
log(stats)
elif not options.once:
with Tui(stats) as tui:
tui.show_stats()
else:
batch(stats)
if __name__ == "__main__":
main()