blob: ec59b53bd5629b4a58db6c3c02112fd3b84bdccd [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*/
#include <linux/export.h>
#include <drm/drmP.h>
#include <drm/drm_mode_object.h>
#include "drm_crtc_internal.h"
/*
* Internal function to assign a slot in the object idr and optionally
* register the object into the idr.
*/
int drm_mode_object_get_reg(struct drm_device *dev,
struct drm_mode_object *obj,
uint32_t obj_type,
bool register_obj,
void (*obj_free_cb)(struct kref *kref))
{
int ret;
mutex_lock(&dev->mode_config.idr_mutex);
ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL);
if (ret >= 0) {
/*
* Set up the object linking under the protection of the idr
* lock so that other users can't see inconsistent state.
*/
obj->id = ret;
obj->type = obj_type;
if (obj_free_cb) {
obj->free_cb = obj_free_cb;
kref_init(&obj->refcount);
}
}
mutex_unlock(&dev->mode_config.idr_mutex);
return ret < 0 ? ret : 0;
}
/**
* drm_mode_object_get - allocate a new modeset identifier
* @dev: DRM device
* @obj: object pointer, used to generate unique ID
* @obj_type: object type
*
* Create a unique identifier based on @ptr in @dev's identifier space. Used
* for tracking modes, CRTCs and connectors. Note that despite the _get postfix
* modeset identifiers are _not_ reference counted. Hence don't use this for
* reference counted modeset objects like framebuffers.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_mode_object_get(struct drm_device *dev,
struct drm_mode_object *obj, uint32_t obj_type)
{
return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL);
}
void drm_mode_object_register(struct drm_device *dev,
struct drm_mode_object *obj)
{
mutex_lock(&dev->mode_config.idr_mutex);
idr_replace(&dev->mode_config.crtc_idr, obj, obj->id);
mutex_unlock(&dev->mode_config.idr_mutex);
}
/**
* drm_lease_required - check types which must be leased to be used
* @type: type of object
*
* Returns whether the provided type of drm_mode_object must
* be owned or leased to be used by a process.
*/
bool drm_mode_object_lease_required(uint32_t type)
{
switch (type) {
case DRM_MODE_OBJECT_CRTC:
case DRM_MODE_OBJECT_CONNECTOR:
case DRM_MODE_OBJECT_PLANE:
return true;
default:
return false;
}
}
/**
* drm_mode_object_unregister - free a modeset identifer
* @dev: DRM device
* @object: object to free
*
* Free @id from @dev's unique identifier pool.
* This function can be called multiple times, and guards against
* multiple removals.
* These modeset identifiers are _not_ reference counted. Hence don't use this
* for reference counted modeset objects like framebuffers.
*/
void drm_mode_object_unregister(struct drm_device *dev,
struct drm_mode_object *object)
{
mutex_lock(&dev->mode_config.idr_mutex);
if (object->id) {
idr_remove(&dev->mode_config.crtc_idr, object->id);
object->id = 0;
}
mutex_unlock(&dev->mode_config.idr_mutex);
}
struct drm_mode_object *__drm_mode_object_find(struct drm_device *dev,
struct drm_file *file_priv,
uint32_t id, uint32_t type)
{
struct drm_mode_object *obj = NULL;
mutex_lock(&dev->mode_config.idr_mutex);
obj = idr_find(&dev->mode_config.crtc_idr, id);
if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type)
obj = NULL;
if (obj && obj->id != id)
obj = NULL;
if (obj && drm_mode_object_lease_required(obj->type) &&
!_drm_lease_held(file_priv, obj->id))
obj = NULL;
if (obj && obj->free_cb) {
if (!kref_get_unless_zero(&obj->refcount))
obj = NULL;
}
mutex_unlock(&dev->mode_config.idr_mutex);
return obj;
}
/**
* drm_mode_object_find - look up a drm object with static lifetime
* @dev: drm device
* @id: id of the mode object
* @type: type of the mode object
*
* This function is used to look up a modeset object. It will acquire a
* reference for reference counted objects. This reference must be dropped again
* by callind drm_mode_object_unreference().
*/
struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
struct drm_file *file_priv,
uint32_t id, uint32_t type)
{
struct drm_mode_object *obj = NULL;
obj = __drm_mode_object_find(dev, file_priv, id, type);
return obj;
}
EXPORT_SYMBOL(drm_mode_object_find);
/**
* drm_mode_object_unreference - decr the object refcnt
* @obj: mode_object
*
* This function decrements the object's refcount if it is a refcounted modeset
* object. It is a no-op on any other object. This is used to drop references
* acquired with drm_mode_object_reference().
*/
void drm_mode_object_unreference(struct drm_mode_object *obj)
{
if (obj->free_cb) {
DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount));
kref_put(&obj->refcount, obj->free_cb);
}
}
EXPORT_SYMBOL(drm_mode_object_unreference);
/**
* drm_mode_object_reference - incr the object refcnt
* @obj: mode_object
*
* This function increments the object's refcount if it is a refcounted modeset
* object. It is a no-op on any other object. References should be dropped again
* by calling drm_mode_object_unreference().
*/
void drm_mode_object_reference(struct drm_mode_object *obj)
{
if (obj->free_cb) {
DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount));
kref_get(&obj->refcount);
}
}
EXPORT_SYMBOL(drm_mode_object_reference);
/**
* drm_object_attach_property - attach a property to a modeset object
* @obj: drm modeset object
* @property: property to attach
* @init_val: initial value of the property
*
* This attaches the given property to the modeset object with the given initial
* value. Currently this function cannot fail since the properties are stored in
* a statically sized array.
*/
void drm_object_attach_property(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t init_val)
{
int count = obj->properties->count;
if (count == DRM_OBJECT_MAX_PROPERTY) {
WARN(1, "Failed to attach object property (type: 0x%x). Please "
"increase DRM_OBJECT_MAX_PROPERTY by 1 for each time "
"you see this message on the same object type.\n",
obj->type);
return;
}
obj->properties->properties[count] = property;
obj->properties->values[count] = init_val;
obj->properties->count++;
}
EXPORT_SYMBOL(drm_object_attach_property);
/**
* drm_object_property_set_value - set the value of a property
* @obj: drm mode object to set property value for
* @property: property to set
* @val: value the property should be set to
*
* This function sets a given property on a given object. This function only
* changes the software state of the property, it does not call into the
* driver's ->set_property callback.
*
* Note that atomic drivers should not have any need to call this, the core will
* ensure consistency of values reported back to userspace through the
* appropriate ->atomic_get_property callback. Only legacy drivers should call
* this function to update the tracked value (after clamping and other
* restrictions have been applied).
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_object_property_set_value(struct drm_mode_object *obj,
struct drm_property *property, uint64_t val)
{
int i;
for (i = 0; i < obj->properties->count; i++) {
if (obj->properties->properties[i] == property) {
obj->properties->values[i] = val;
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_set_value);
/**
* drm_object_property_get_value - retrieve the value of a property
* @obj: drm mode object to get property value from
* @property: property to retrieve
* @val: storage for the property value
*
* This function retrieves the softare state of the given property for the given
* property. Since there is no driver callback to retrieve the current property
* value this might be out of sync with the hardware, depending upon the driver
* and property.
*
* Atomic drivers should never call this function directly, the core will read
* out property values through the various ->atomic_get_property callbacks.
*
* Returns:
* Zero on success, error code on failure.
*/
int drm_object_property_get_value(struct drm_mode_object *obj,
struct drm_property *property, uint64_t *val)
{
int i;
/* read-only properties bypass atomic mechanism and still store
* their value in obj->properties->values[].. mostly to avoid
* having to deal w/ EDID and similar props in atomic paths:
*/
if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) &&
!(property->flags & DRM_MODE_PROP_IMMUTABLE))
return drm_atomic_get_property(obj, property, val);
for (i = 0; i < obj->properties->count; i++) {
if (obj->properties->properties[i] == property) {
*val = obj->properties->values[i];
return 0;
}
}
return -EINVAL;
}
EXPORT_SYMBOL(drm_object_property_get_value);
/* helper for getconnector and getproperties ioctls */
int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
uint32_t __user *prop_ptr,
uint64_t __user *prop_values,
uint32_t *arg_count_props)
{
int i, ret, count;
for (i = 0, count = 0; i < obj->properties->count; i++) {
struct drm_property *prop = obj->properties->properties[i];
uint64_t val;
if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic)
continue;
if (*arg_count_props > count) {
ret = drm_object_property_get_value(obj, prop, &val);
if (ret)
return ret;
if (put_user(prop->base.id, prop_ptr + count))
return -EFAULT;
if (put_user(val, prop_values + count))
return -EFAULT;
}
count++;
}
*arg_count_props = count;
return 0;
}
/**
* drm_mode_obj_get_properties_ioctl - get the current value of a object's property
* @dev: DRM device
* @data: ioctl data
* @file_priv: DRM file info
*
* This function retrieves the current value for an object's property. Compared
* to the connector specific ioctl this one is extended to also work on crtc and
* plane objects.
*
* Called by the user via ioctl.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_obj_get_properties *arg = data;
struct drm_mode_object *obj;
int ret = 0;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type);
if (!obj) {
ret = -ENOENT;
goto out;
}
if (!obj->properties) {
ret = -EINVAL;
goto out_unref;
}
ret = drm_mode_object_get_properties(obj, file_priv->atomic,
(uint32_t __user *)(unsigned long)(arg->props_ptr),
(uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
&arg->count_props);
out_unref:
drm_mode_object_unreference(obj);
out:
drm_modeset_unlock_all(dev);
return ret;
}
struct drm_property *drm_mode_obj_find_prop_id(struct drm_mode_object *obj,
uint32_t prop_id)
{
int i;
for (i = 0; i < obj->properties->count; i++)
if (obj->properties->properties[i]->base.id == prop_id)
return obj->properties->properties[i];
return NULL;
}
int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_mode_obj_set_property *arg = data;
struct drm_mode_object *arg_obj;
struct drm_property *property;
int ret = -EINVAL;
struct drm_mode_object *ref;
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
drm_modeset_lock_all(dev);
arg_obj = drm_mode_object_find(dev, file_priv, arg->obj_id, arg->obj_type);
if (!arg_obj) {
ret = -ENOENT;
goto out;
}
if (!arg_obj->properties)
goto out_unref;
property = drm_mode_obj_find_prop_id(arg_obj, arg->prop_id);
if (!property)
goto out_unref;
if (!drm_property_change_valid_get(property, arg->value, &ref))
goto out_unref;
switch (arg_obj->type) {
case DRM_MODE_OBJECT_CONNECTOR:
ret = drm_mode_connector_set_obj_prop(arg_obj, property,
arg->value);
break;
case DRM_MODE_OBJECT_CRTC:
ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value);
break;
case DRM_MODE_OBJECT_PLANE:
ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj),
property, arg->value);
break;
}
drm_property_change_valid_put(property, ref);
out_unref:
drm_mode_object_unreference(arg_obj);
out:
drm_modeset_unlock_all(dev);
return ret;
}