| /* |
| * KB3310B Embedded Controller |
| * |
| * Copyright (C) 2008 Lemote Inc. |
| * Author: liujl <liujl@lemote.com>, 2008-03-14 |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #ifndef _EC_KB3310B_H |
| #define _EC_KB3310B_H |
| |
| extern unsigned char ec_read(unsigned short addr); |
| extern void ec_write(unsigned short addr, unsigned char val); |
| extern int ec_query_seq(unsigned char cmd); |
| extern int ec_query_event_num(void); |
| extern int ec_get_event_num(void); |
| |
| typedef int (*sci_handler) (int status); |
| extern sci_handler yeeloong_report_lid_status; |
| |
| #define SCI_IRQ_NUM 0x0A |
| |
| /* |
| * The following registers are determined by the EC index configuration. |
| * 1, fill the PORT_HIGH as EC register high part. |
| * 2, fill the PORT_LOW as EC register low part. |
| * 3, fill the PORT_DATA as EC register write data or get the data from it. |
| */ |
| #define EC_IO_PORT_HIGH 0x0381 |
| #define EC_IO_PORT_LOW 0x0382 |
| #define EC_IO_PORT_DATA 0x0383 |
| |
| /* |
| * EC delay time is 500us for register and status access |
| */ |
| #define EC_REG_DELAY 500 /* unit : us */ |
| #define EC_CMD_TIMEOUT 0x1000 |
| |
| /* |
| * EC access port for SCI communication |
| */ |
| #define EC_CMD_PORT 0x66 |
| #define EC_STS_PORT 0x66 |
| #define EC_DAT_PORT 0x62 |
| #define CMD_INIT_IDLE_MODE 0xdd |
| #define CMD_EXIT_IDLE_MODE 0xdf |
| #define CMD_INIT_RESET_MODE 0xd8 |
| #define CMD_REBOOT_SYSTEM 0x8c |
| #define CMD_GET_EVENT_NUM 0x84 |
| #define CMD_PROGRAM_PIECE 0xda |
| |
| /* temperature & fan registers */ |
| #define REG_TEMPERATURE_VALUE 0xF458 |
| #define REG_FAN_AUTO_MAN_SWITCH 0xF459 |
| #define BIT_FAN_AUTO 0 |
| #define BIT_FAN_MANUAL 1 |
| #define REG_FAN_CONTROL 0xF4D2 |
| #define BIT_FAN_CONTROL_ON (1 << 0) |
| #define BIT_FAN_CONTROL_OFF (0 << 0) |
| #define REG_FAN_STATUS 0xF4DA |
| #define BIT_FAN_STATUS_ON (1 << 0) |
| #define BIT_FAN_STATUS_OFF (0 << 0) |
| #define REG_FAN_SPEED_HIGH 0xFE22 |
| #define REG_FAN_SPEED_LOW 0xFE23 |
| #define REG_FAN_SPEED_LEVEL 0xF4CC |
| /* fan speed divider */ |
| #define FAN_SPEED_DIVIDER 480000 /* (60*1000*1000/62.5/2)*/ |
| |
| /* battery registers */ |
| #define REG_BAT_DESIGN_CAP_HIGH 0xF77D |
| #define REG_BAT_DESIGN_CAP_LOW 0xF77E |
| #define REG_BAT_FULLCHG_CAP_HIGH 0xF780 |
| #define REG_BAT_FULLCHG_CAP_LOW 0xF781 |
| #define REG_BAT_DESIGN_VOL_HIGH 0xF782 |
| #define REG_BAT_DESIGN_VOL_LOW 0xF783 |
| #define REG_BAT_CURRENT_HIGH 0xF784 |
| #define REG_BAT_CURRENT_LOW 0xF785 |
| #define REG_BAT_VOLTAGE_HIGH 0xF786 |
| #define REG_BAT_VOLTAGE_LOW 0xF787 |
| #define REG_BAT_TEMPERATURE_HIGH 0xF788 |
| #define REG_BAT_TEMPERATURE_LOW 0xF789 |
| #define REG_BAT_RELATIVE_CAP_HIGH 0xF492 |
| #define REG_BAT_RELATIVE_CAP_LOW 0xF493 |
| #define REG_BAT_VENDOR 0xF4C4 |
| #define FLAG_BAT_VENDOR_SANYO 0x01 |
| #define FLAG_BAT_VENDOR_SIMPLO 0x02 |
| #define REG_BAT_CELL_COUNT 0xF4C6 |
| #define FLAG_BAT_CELL_3S1P 0x03 |
| #define FLAG_BAT_CELL_3S2P 0x06 |
| #define REG_BAT_CHARGE 0xF4A2 |
| #define FLAG_BAT_CHARGE_DISCHARGE 0x01 |
| #define FLAG_BAT_CHARGE_CHARGE 0x02 |
| #define FLAG_BAT_CHARGE_ACPOWER 0x00 |
| #define REG_BAT_STATUS 0xF4B0 |
| #define BIT_BAT_STATUS_LOW (1 << 5) |
| #define BIT_BAT_STATUS_DESTROY (1 << 2) |
| #define BIT_BAT_STATUS_FULL (1 << 1) |
| #define BIT_BAT_STATUS_IN (1 << 0) |
| #define REG_BAT_CHARGE_STATUS 0xF4B1 |
| #define BIT_BAT_CHARGE_STATUS_OVERTEMP (1 << 2) |
| #define BIT_BAT_CHARGE_STATUS_PRECHG (1 << 1) |
| #define REG_BAT_STATE 0xF482 |
| #define BIT_BAT_STATE_CHARGING (1 << 1) |
| #define BIT_BAT_STATE_DISCHARGING (1 << 0) |
| #define REG_BAT_POWER 0xF440 |
| #define BIT_BAT_POWER_S3 (1 << 2) |
| #define BIT_BAT_POWER_ON (1 << 1) |
| #define BIT_BAT_POWER_ACIN (1 << 0) |
| |
| /* other registers */ |
| /* Audio: rd/wr */ |
| #define REG_AUDIO_VOLUME 0xF46C |
| #define REG_AUDIO_MUTE 0xF4E7 |
| #define REG_AUDIO_BEEP 0xF4D0 |
| /* USB port power or not: rd/wr */ |
| #define REG_USB0_FLAG 0xF461 |
| #define REG_USB1_FLAG 0xF462 |
| #define REG_USB2_FLAG 0xF463 |
| #define BIT_USB_FLAG_ON 1 |
| #define BIT_USB_FLAG_OFF 0 |
| /* LID */ |
| #define REG_LID_DETECT 0xF4BD |
| #define BIT_LID_DETECT_ON 1 |
| #define BIT_LID_DETECT_OFF 0 |
| /* CRT */ |
| #define REG_CRT_DETECT 0xF4AD |
| #define BIT_CRT_DETECT_PLUG 1 |
| #define BIT_CRT_DETECT_UNPLUG 0 |
| /* LCD backlight brightness adjust: 9 levels */ |
| #define REG_DISPLAY_BRIGHTNESS 0xF4F5 |
| /* Black screen Status */ |
| #define BIT_DISPLAY_LCD_ON 1 |
| #define BIT_DISPLAY_LCD_OFF 0 |
| /* LCD backlight control: off/restore */ |
| #define REG_BACKLIGHT_CTRL 0xF7BD |
| #define BIT_BACKLIGHT_ON 1 |
| #define BIT_BACKLIGHT_OFF 0 |
| /* Reset the machine auto-clear: rd/wr */ |
| #define REG_RESET 0xF4EC |
| #define BIT_RESET_ON 1 |
| /* Light the led: rd/wr */ |
| #define REG_LED 0xF4C8 |
| #define BIT_LED_RED_POWER (1 << 0) |
| #define BIT_LED_ORANGE_POWER (1 << 1) |
| #define BIT_LED_GREEN_CHARGE (1 << 2) |
| #define BIT_LED_RED_CHARGE (1 << 3) |
| #define BIT_LED_NUMLOCK (1 << 4) |
| /* Test led mode, all led on/off */ |
| #define REG_LED_TEST 0xF4C2 |
| #define BIT_LED_TEST_IN 1 |
| #define BIT_LED_TEST_OUT 0 |
| /* Camera on/off */ |
| #define REG_CAMERA_STATUS 0xF46A |
| #define BIT_CAMERA_STATUS_ON 1 |
| #define BIT_CAMERA_STATUS_OFF 0 |
| #define REG_CAMERA_CONTROL 0xF7B7 |
| #define BIT_CAMERA_CONTROL_OFF 0 |
| #define BIT_CAMERA_CONTROL_ON 1 |
| /* Wlan Status */ |
| #define REG_WLAN 0xF4FA |
| #define BIT_WLAN_ON 1 |
| #define BIT_WLAN_OFF 0 |
| #define REG_DISPLAY_LCD 0xF79F |
| |
| /* SCI Event Number from EC */ |
| enum { |
| EVENT_LID = 0x23, /* LID open/close */ |
| EVENT_DISPLAY_TOGGLE, /* Fn+F3 for display switch */ |
| EVENT_SLEEP, /* Fn+F1 for entering sleep mode */ |
| EVENT_OVERTEMP, /* Over-temperature happened */ |
| EVENT_CRT_DETECT, /* CRT is connected */ |
| EVENT_CAMERA, /* Camera on/off */ |
| EVENT_USB_OC2, /* USB2 Over Current occurred */ |
| EVENT_USB_OC0, /* USB0 Over Current occurred */ |
| EVENT_BLACK_SCREEN, /* Turn on/off backlight */ |
| EVENT_AUDIO_MUTE, /* Mute on/off */ |
| EVENT_DISPLAY_BRIGHTNESS,/* LCD backlight brightness adjust */ |
| EVENT_AC_BAT, /* AC & Battery relative issue */ |
| EVENT_AUDIO_VOLUME, /* Volume adjust */ |
| EVENT_WLAN, /* Wlan on/off */ |
| EVENT_END |
| }; |
| |
| #endif /* !_EC_KB3310B_H */ |
