/******************************************************************************
 *
 * Copyright (C) 2016-2017 Cadence Design Systems, Inc.
 * All rights reserved worldwide.
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * 1. Redistributions of source code must retain the above copyright notice,
 * this list of conditions and the following disclaimer.
 *
 * 2. Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation and/or
 * other materials provided with the distribution.
 *
 * 3. Neither the name of the copyright holder nor the names of its contributors
 * may be used to endorse or promote products derived from this software without
 * specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
 * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
 * INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE
 * OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 * Copyright 2018 NXP
 *
 ******************************************************************************
 *
 * ss28fdsoi_hdmitx_table.h
 *
 ******************************************************************************
 */

#ifndef SS28FDSOI_HDMITX_TABLE_H_
#define SS28FDSOI_HDMITX_TABLE_H_

#include <linux/io.h>

# define SS28FDSOI_HDMITX_CLOCK_CONTROL_TABLE_ROWS 22
# define SS28FDSOI_HDMITX_CLOCK_CONTROL_TABLE_COLS 23

# define SS28FDSOI_HDMITX_PLL_TUNING_TABLE_ROWS 38
# define SS28FDSOI_HDMITX_PLL_TUNING_TABLE_COLS 10

typedef enum {
	PIXEL_CLK_FREQ_KHZ_MIN,
	PIXEL_CLK_FREQ_KHZ_MAX,
	FEEDBACK_FACTOR,
	DATA_RANGE_MBPS_MIN,
	DATA_RANGE_MBPS_MAX,
	CMNDA_PLL0_IP_DIV,
	CMN_REF_CLK_DIG_DIV,
	REF_CLK_DIVIDER_SCALER,
	PLL_FB_DIV_TOTAL,
	CMNDA_PLL0_FB_DIV_LOW,
	CMNDA_PLL0_FB_DIV_HIGH,
	VCO_FREQ_KHZ_MIN,
	VCO_FREQ_KHZ_MAX,
	VCO_RING_SELECT,
	CMNDA_HS_CLK_0_SEL,
	CMNDA_HS_CLK_1_SEL,
	HSCLK_DIV_AT_XCVR,
	HSCLK_DIV_TX_SUB_RATE,
	TX_CLK_KHZ_MIN,
	TX_CLK_KHZ_MAX,
	CMNDA_PLL0_HS_SYM_DIV_SEL,
	CMNDA_PLL0_CLK_FREQ_KHZ_MIN,
	CMNDA_PLL0_CLK_FREQ_KHZ_MAX
} CLK_CTRL_PARAM;

typedef enum {
	VCO_FREQ_BIN,
	PLL_VCO_FREQ_KHZ_MIN,
	PLL_VCO_FREQ_KHZ_MAX,
	VOLTAGE_TO_CURRENT_COARSE,
	VOLTAGE_TO_CURRENT,
	NDAC_CTRL,
	PMOS_CTRL,
	PTAT_NDAC_CTRL,
	PLL_FEEDBACK_DIV_TOTAL,
	CHARGE_PUMP_GAIN
} PLL_TUNE_PARAM;

extern const u32
ss28fdsoi_hdmitx_clock_control_table[SS28FDSOI_HDMITX_CLOCK_CONTROL_TABLE_ROWS]
    [SS28FDSOI_HDMITX_CLOCK_CONTROL_TABLE_COLS];
extern const u32
ss28fdsoi_hdmitx_pll_tuning_table[SS28FDSOI_HDMITX_PLL_TUNING_TABLE_ROWS]
    [SS28FDSOI_HDMITX_PLL_TUNING_TABLE_COLS];

#endif