drivers/usb/typec/ucsi/ucsi.h - linux-imx - Git at Google

 /* SPDX-License-Identifier: GPL-2.0 */

 #ifndef __DRIVER_USB_TYPEC_UCSI_H
 #define __DRIVER_USB_TYPEC_UCSI_H

 #include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/types.h>

 /* -------------------------------------------------------------------------- */

 /* Command Status and Connector Change Indication (CCI) data structure */
 struct ucsi_cci {
 	u8:1; /* reserved */
 	u8 connector_change:7;
 	u8 data_length;
 	u16:9; /* reserved */
 	u16 not_supported:1;
 	u16 cancel_complete:1;
 	u16 reset_complete:1;
 	u16 busy:1;
 	u16 ack_complete:1;
 	u16 error:1;
 	u16 cmd_complete:1;
 } __packed;

 /* Default fields in CONTROL data structure */
 struct ucsi_command {
 	u8 cmd;
 	u8 length;
 	u64 data:48;
 } __packed;

 /* ACK Command structure */
 struct ucsi_ack_cmd {
 	u8 cmd;
 	u8 length;
 	u8 cci_ack:1;
 	u8 cmd_ack:1;
 	u8:6; /* reserved */
 } __packed;

 /* Connector Reset Command structure */
 struct ucsi_con_rst {
 	u8 cmd;
 	u8 length;
 	u8 con_num:7;
 	u8 hard_reset:1;
 } __packed;

 /* Set USB Operation Mode Command structure */
 struct ucsi_uor_cmd {
 	u8 cmd;
 	u8 length;
 	u16 con_num:7;
 	u16 role:3;
 #define UCSI_UOR_ROLE_DFP			BIT(0)
 #define UCSI_UOR_ROLE_UFP			BIT(1)
 #define UCSI_UOR_ROLE_DRP			BIT(2)
 	u16:6; /* reserved */
 } __packed;

 struct ucsi_control {
 	union {
 		u64 raw_cmd;
 		struct ucsi_command cmd;
 		struct ucsi_uor_cmd uor;
 		struct ucsi_ack_cmd ack;
 		struct ucsi_con_rst con_rst;
 	};
 };

 #define __UCSI_CMD(_ctrl_, _cmd_)					\
 {									\
 	(_ctrl_).raw_cmd = 0;						\
 	(_ctrl_).cmd.cmd = _cmd_;					\
 }

 /* Helper for preparing ucsi_control for CONNECTOR_RESET command. */
 #define UCSI_CMD_CONNECTOR_RESET(_ctrl_, _con_, _hard_)			\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_CONNECTOR_RESET)			\
 	(_ctrl_).con_rst.con_num = (_con_)->num;			\
 	(_ctrl_).con_rst.hard_reset = _hard_;				\
 }

 /* Helper for preparing ucsi_control for ACK_CC_CI command. */
 #define UCSI_CMD_ACK(_ctrl_, _ack_)					\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_ACK_CC_CI)				\
 	(_ctrl_).ack.cci_ack = ((_ack_) == UCSI_ACK_EVENT);		\
 	(_ctrl_).ack.cmd_ack = ((_ack_) == UCSI_ACK_CMD);		\
 }

 /* Helper for preparing ucsi_control for SET_NOTIFY_ENABLE command. */
 #define UCSI_CMD_SET_NTFY_ENABLE(_ctrl_, _ntfys_)			\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_SET_NOTIFICATION_ENABLE)		\
 	(_ctrl_).cmd.data = _ntfys_;					\
 }

 /* Helper for preparing ucsi_control for GET_CAPABILITY command. */
 #define UCSI_CMD_GET_CAPABILITY(_ctrl_)					\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_GET_CAPABILITY)				\
 }

 /* Helper for preparing ucsi_control for GET_CONNECTOR_CAPABILITY command. */
 #define UCSI_CMD_GET_CONNECTOR_CAPABILITY(_ctrl_, _con_)		\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_CAPABILITY)		\
 	(_ctrl_).cmd.data = _con_;					\
 }

 /* Helper for preparing ucsi_control for GET_CONNECTOR_STATUS command. */
 #define UCSI_CMD_GET_CONNECTOR_STATUS(_ctrl_, _con_)			\
 {									\
 	__UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_STATUS)			\
 	(_ctrl_).cmd.data = _con_;					\
 }

 #define __UCSI_ROLE(_ctrl_, _cmd_, _con_num_)				\
 {									\
 	__UCSI_CMD(_ctrl_, _cmd_)					\
 	(_ctrl_).uor.con_num = _con_num_;				\
 	(_ctrl_).uor.role = UCSI_UOR_ROLE_DRP;				\
 }

 /* Helper for preparing ucsi_control for SET_UOR command. */
 #define UCSI_CMD_SET_UOR(_ctrl_, _con_, _role_)				\
 {									\
 	__UCSI_ROLE(_ctrl_, UCSI_SET_UOR, (_con_)->num)		\
 	(_ctrl_).uor.role |= (_role_) == TYPEC_HOST ? UCSI_UOR_ROLE_DFP : \
 			  UCSI_UOR_ROLE_UFP;				\
 }

 /* Helper for preparing ucsi_control for SET_PDR command. */
 #define UCSI_CMD_SET_PDR(_ctrl_, _con_, _role_)			\
 {									\
 	__UCSI_ROLE(_ctrl_, UCSI_SET_PDR, (_con_)->num)		\
 	(_ctrl_).uor.role |= (_role_) == TYPEC_SOURCE ? UCSI_UOR_ROLE_DFP : \
 			UCSI_UOR_ROLE_UFP;				\
 }

 /* Commands */
 #define UCSI_PPM_RESET			0x01
 #define UCSI_CANCEL			0x02
 #define UCSI_CONNECTOR_RESET		0x03
 #define UCSI_ACK_CC_CI			0x04
 #define UCSI_SET_NOTIFICATION_ENABLE	0x05
 #define UCSI_GET_CAPABILITY		0x06
 #define UCSI_GET_CONNECTOR_CAPABILITY	0x07
 #define UCSI_SET_UOM			0x08
 #define UCSI_SET_UOR			0x09
 #define UCSI_SET_PDM			0x0a
 #define UCSI_SET_PDR			0x0b
 #define UCSI_GET_ALTERNATE_MODES	0x0c
 #define UCSI_GET_CAM_SUPPORTED		0x0d
 #define UCSI_GET_CURRENT_CAM		0x0e
 #define UCSI_SET_NEW_CAM		0x0f
 #define UCSI_GET_PDOS			0x10
 #define UCSI_GET_CABLE_PROPERTY		0x11
 #define UCSI_GET_CONNECTOR_STATUS	0x12
 #define UCSI_GET_ERROR_STATUS		0x13

 /* ACK_CC_CI commands */
 #define UCSI_ACK_EVENT			1
 #define UCSI_ACK_CMD			2

 /* Bits for SET_NOTIFICATION_ENABLE command */
 #define UCSI_ENABLE_NTFY_CMD_COMPLETE		BIT(0)
 #define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE	BIT(1)
 #define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE	BIT(2)
 #define UCSI_ENABLE_NTFY_CAP_CHANGE		BIT(5)
 #define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE	BIT(6)
 #define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE	BIT(7)
 #define UCSI_ENABLE_NTFY_CAM_CHANGE		BIT(8)
 #define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE	BIT(9)
 #define UCSI_ENABLE_NTFY_PARTNER_CHANGE		BIT(11)
 #define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE		BIT(12)
 #define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE	BIT(14)
 #define UCSI_ENABLE_NTFY_ERROR			BIT(15)
 #define UCSI_ENABLE_NTFY_ALL			0xdbe7

 /* Error information returned by PPM in response to GET_ERROR_STATUS command. */
 #define UCSI_ERROR_UNREGONIZED_CMD		BIT(0)
 #define UCSI_ERROR_INVALID_CON_NUM		BIT(1)
 #define UCSI_ERROR_INVALID_CMD_ARGUMENT		BIT(2)
 #define UCSI_ERROR_INCOMPATIBLE_PARTNER		BIT(3)
 #define UCSI_ERROR_CC_COMMUNICATION_ERR		BIT(4)
 #define UCSI_ERROR_DEAD_BATTERY			BIT(5)
 #define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL	BIT(6)

 /* Data structure filled by PPM in response to GET_CAPABILITY command. */
 struct ucsi_capability {
 	u32 attributes;
 #define UCSI_CAP_ATTR_DISABLE_STATE		BIT(0)
 #define UCSI_CAP_ATTR_BATTERY_CHARGING		BIT(1)
 #define UCSI_CAP_ATTR_USB_PD			BIT(2)
 #define UCSI_CAP_ATTR_TYPEC_CURRENT		BIT(6)
 #define UCSI_CAP_ATTR_POWER_AC_SUPPLY		BIT(8)
 #define UCSI_CAP_ATTR_POWER_OTHER		BIT(10)
 #define UCSI_CAP_ATTR_POWER_VBUS		BIT(14)
 	u32 num_connectors:8;
 	u32 features:24;
 #define UCSI_CAP_SET_UOM			BIT(0)
 #define UCSI_CAP_SET_PDM			BIT(1)
 #define UCSI_CAP_ALT_MODE_DETAILS		BIT(2)
 #define UCSI_CAP_ALT_MODE_OVERRIDE		BIT(3)
 #define UCSI_CAP_PDO_DETAILS			BIT(4)
 #define UCSI_CAP_CABLE_DETAILS			BIT(5)
 #define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS	BIT(6)
 #define UCSI_CAP_PD_RESET			BIT(7)
 	u8 num_alt_modes;
 	u8 reserved;
 	u16 bc_version;
 	u16 pd_version;
 	u16 typec_version;
 } __packed;

 /* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
 struct ucsi_connector_capability {
 	u8 op_mode;
 #define UCSI_CONCAP_OPMODE_DFP			BIT(0)
 #define UCSI_CONCAP_OPMODE_UFP			BIT(1)
 #define UCSI_CONCAP_OPMODE_DRP			BIT(2)
 #define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY	BIT(3)
 #define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY	BIT(4)
 #define UCSI_CONCAP_OPMODE_USB2			BIT(5)
 #define UCSI_CONCAP_OPMODE_USB3			BIT(6)
 #define UCSI_CONCAP_OPMODE_ALT_MODE		BIT(7)
 	u8 provider:1;
 	u8 consumer:1;
 	u8:6; /* reserved */
 } __packed;

 struct ucsi_altmode {
 	u16 svid;
 	u32 mid;
 } __packed;

 /* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
 struct ucsi_cable_property {
 	u16 speed_supported;
 	u8 current_capability;
 	u8 vbus_in_cable:1;
 	u8 active_cable:1;
 	u8 directionality:1;
 	u8 plug_type:2;
 #define UCSI_CABLE_PROPERTY_PLUG_TYPE_A		0
 #define UCSI_CABLE_PROPERTY_PLUG_TYPE_B		1
 #define UCSI_CABLE_PROPERTY_PLUG_TYPE_C		2
 #define UCSI_CABLE_PROPERTY_PLUG_OTHER		3
 	u8 mode_support:1;
 	u8:2; /* reserved */
 	u8 latency:4;
 	u8:4; /* reserved */
 } __packed;

 /* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
 struct ucsi_connector_status {
 	u16 change;
 #define UCSI_CONSTAT_EXT_SUPPLY_CHANGE		BIT(1)
 #define UCSI_CONSTAT_POWER_OPMODE_CHANGE	BIT(2)
 #define UCSI_CONSTAT_PDOS_CHANGE		BIT(5)
 #define UCSI_CONSTAT_POWER_LEVEL_CHANGE		BIT(6)
 #define UCSI_CONSTAT_PD_RESET_COMPLETE		BIT(7)
 #define UCSI_CONSTAT_CAM_CHANGE			BIT(8)
 #define UCSI_CONSTAT_BC_CHANGE			BIT(9)
 #define UCSI_CONSTAT_PARTNER_CHANGE		BIT(11)
 #define UCSI_CONSTAT_POWER_DIR_CHANGE		BIT(12)
 #define UCSI_CONSTAT_CONNECT_CHANGE		BIT(14)
 #define UCSI_CONSTAT_ERROR			BIT(15)
 	u16 pwr_op_mode:3;
 #define UCSI_CONSTAT_PWR_OPMODE_NONE		0
 #define UCSI_CONSTAT_PWR_OPMODE_DEFAULT		1
 #define UCSI_CONSTAT_PWR_OPMODE_BC		2
 #define UCSI_CONSTAT_PWR_OPMODE_PD		3
 #define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5	4
 #define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0	5
 	u16 connected:1;
 	u16 pwr_dir:1;
 	u16 partner_flags:8;
 #define UCSI_CONSTAT_PARTNER_FLAG_USB		BIT(0)
 #define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE	BIT(1)
 	u16 partner_type:3;
 #define UCSI_CONSTAT_PARTNER_TYPE_DFP		1
 #define UCSI_CONSTAT_PARTNER_TYPE_UFP		2
 #define UCSI_CONSTAT_PARTNER_TYPE_CABLE		3 /* Powered Cable */
 #define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP	4 /* Powered Cable */
 #define UCSI_CONSTAT_PARTNER_TYPE_DEBUG		5
 #define UCSI_CONSTAT_PARTNER_TYPE_AUDIO		6
 	u32 request_data_obj;
 	u8 bc_status:2;
 #define UCSI_CONSTAT_BC_NOT_CHARGING		0
 #define UCSI_CONSTAT_BC_NOMINAL_CHARGING	1
 #define UCSI_CONSTAT_BC_SLOW_CHARGING		2
 #define UCSI_CONSTAT_BC_TRICKLE_CHARGING	3
 	u8 provider_cap_limit_reason:4;
 #define UCSI_CONSTAT_CAP_PWR_LOWERED		0
 #define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT	1
 	u8:2; /* reserved */
 } __packed;

 /* -------------------------------------------------------------------------- */

 struct ucsi;

 struct ucsi_data {
 	u16 version;
 	u16 reserved;
 	union {
 		u32 raw_cci;
 		struct ucsi_cci cci;
 	};
 	struct ucsi_control ctrl;
 	u32 message_in[4];
 	u32 message_out[4];
 } __packed;

 /*
  * struct ucsi_ppm - Interface to UCSI Platform Policy Manager
  * @data: memory location to the UCSI data structures
  * @cmd: UCSI command execution routine
  * @sync: Refresh UCSI mailbox (the data structures)
  */
 struct ucsi_ppm {
 	struct ucsi_data *data;
 	int (*cmd)(struct ucsi_ppm *, struct ucsi_control *);
 	int (*sync)(struct ucsi_ppm *);
 };

 struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm);
 void ucsi_unregister_ppm(struct ucsi *ucsi);
 void ucsi_notify(struct ucsi *ucsi);

 #endif /* __DRIVER_USB_TYPEC_UCSI_H */
	/* SPDX-License-Identifier: GPL-2.0 */

	#ifndef __DRIVER_USB_TYPEC_UCSI_H
	#define __DRIVER_USB_TYPEC_UCSI_H

	#include <linux/bitops.h>
	#include <linux/device.h>
	#include <linux/types.h>

	/* -------------------------------------------------------------------------- */

	/* Command Status and Connector Change Indication (CCI) data structure */
	struct ucsi_cci {
	u8:1; /* reserved */
	u8 connector_change:7;
	u8 data_length;
	u16:9; /* reserved */
	u16 not_supported:1;
	u16 cancel_complete:1;
	u16 reset_complete:1;
	u16 busy:1;
	u16 ack_complete:1;
	u16 error:1;
	u16 cmd_complete:1;
	} __packed;

	/* Default fields in CONTROL data structure */
	struct ucsi_command {
	u8 cmd;
	u8 length;
	u64 data:48;
	} __packed;

	/* ACK Command structure */
	struct ucsi_ack_cmd {
	u8 cmd;
	u8 length;
	u8 cci_ack:1;
	u8 cmd_ack:1;
	u8:6; /* reserved */
	} __packed;

	/* Connector Reset Command structure */
	struct ucsi_con_rst {
	u8 cmd;
	u8 length;
	u8 con_num:7;
	u8 hard_reset:1;
	} __packed;

	/* Set USB Operation Mode Command structure */
	struct ucsi_uor_cmd {
	u8 cmd;
	u8 length;
	u16 con_num:7;
	u16 role:3;
	#define UCSI_UOR_ROLE_DFP BIT(0)
	#define UCSI_UOR_ROLE_UFP BIT(1)
	#define UCSI_UOR_ROLE_DRP BIT(2)
	u16:6; /* reserved */
	} __packed;

	struct ucsi_control {
	union {
	u64 raw_cmd;
	struct ucsi_command cmd;
	struct ucsi_uor_cmd uor;
	struct ucsi_ack_cmd ack;
	struct ucsi_con_rst con_rst;
	};
	};

	#define __UCSI_CMD(_ctrl_, _cmd_) \
	{ \
	(_ctrl_).raw_cmd = 0; \
	(_ctrl_).cmd.cmd = _cmd_; \
	}

	/* Helper for preparing ucsi_control for CONNECTOR_RESET command. */
	#define UCSI_CMD_CONNECTOR_RESET(_ctrl_, _con_, _hard_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_CONNECTOR_RESET) \
	(_ctrl_).con_rst.con_num = (_con_)->num; \
	(_ctrl_).con_rst.hard_reset = _hard_; \
	}

	/* Helper for preparing ucsi_control for ACK_CC_CI command. */
	#define UCSI_CMD_ACK(_ctrl_, _ack_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_ACK_CC_CI) \
	(_ctrl_).ack.cci_ack = ((_ack_) == UCSI_ACK_EVENT); \
	(_ctrl_).ack.cmd_ack = ((_ack_) == UCSI_ACK_CMD); \
	}

	/* Helper for preparing ucsi_control for SET_NOTIFY_ENABLE command. */
	#define UCSI_CMD_SET_NTFY_ENABLE(_ctrl_, _ntfys_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_SET_NOTIFICATION_ENABLE) \
	(_ctrl_).cmd.data = _ntfys_; \
	}

	/* Helper for preparing ucsi_control for GET_CAPABILITY command. */
	#define UCSI_CMD_GET_CAPABILITY(_ctrl_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_GET_CAPABILITY) \
	}

	/* Helper for preparing ucsi_control for GET_CONNECTOR_CAPABILITY command. */
	#define UCSI_CMD_GET_CONNECTOR_CAPABILITY(_ctrl_, _con_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_CAPABILITY) \
	(_ctrl_).cmd.data = _con_; \
	}

	/* Helper for preparing ucsi_control for GET_CONNECTOR_STATUS command. */
	#define UCSI_CMD_GET_CONNECTOR_STATUS(_ctrl_, _con_) \
	{ \
	__UCSI_CMD(_ctrl_, UCSI_GET_CONNECTOR_STATUS) \
	(_ctrl_).cmd.data = _con_; \
	}

	#define __UCSI_ROLE(_ctrl_, _cmd_, _con_num_) \
	{ \
	__UCSI_CMD(_ctrl_, _cmd_) \
	(_ctrl_).uor.con_num = _con_num_; \
	(_ctrl_).uor.role = UCSI_UOR_ROLE_DRP; \
	}

	/* Helper for preparing ucsi_control for SET_UOR command. */
	#define UCSI_CMD_SET_UOR(_ctrl_, _con_, _role_) \
	{ \
	__UCSI_ROLE(_ctrl_, UCSI_SET_UOR, (_con_)->num) \
	(_ctrl_).uor.role \|= (_role_) == TYPEC_HOST ? UCSI_UOR_ROLE_DFP : \
	UCSI_UOR_ROLE_UFP; \
	}

	/* Helper for preparing ucsi_control for SET_PDR command. */
	#define UCSI_CMD_SET_PDR(_ctrl_, _con_, _role_) \
	{ \
	__UCSI_ROLE(_ctrl_, UCSI_SET_PDR, (_con_)->num) \
	(_ctrl_).uor.role \|= (_role_) == TYPEC_SOURCE ? UCSI_UOR_ROLE_DFP : \
	UCSI_UOR_ROLE_UFP; \
	}

	/* Commands */
	#define UCSI_PPM_RESET 0x01
	#define UCSI_CANCEL 0x02
	#define UCSI_CONNECTOR_RESET 0x03
	#define UCSI_ACK_CC_CI 0x04
	#define UCSI_SET_NOTIFICATION_ENABLE 0x05
	#define UCSI_GET_CAPABILITY 0x06
	#define UCSI_GET_CONNECTOR_CAPABILITY 0x07
	#define UCSI_SET_UOM 0x08
	#define UCSI_SET_UOR 0x09
	#define UCSI_SET_PDM 0x0a
	#define UCSI_SET_PDR 0x0b
	#define UCSI_GET_ALTERNATE_MODES 0x0c
	#define UCSI_GET_CAM_SUPPORTED 0x0d
	#define UCSI_GET_CURRENT_CAM 0x0e
	#define UCSI_SET_NEW_CAM 0x0f
	#define UCSI_GET_PDOS 0x10
	#define UCSI_GET_CABLE_PROPERTY 0x11
	#define UCSI_GET_CONNECTOR_STATUS 0x12
	#define UCSI_GET_ERROR_STATUS 0x13

	/* ACK_CC_CI commands */
	#define UCSI_ACK_EVENT 1
	#define UCSI_ACK_CMD 2

	/* Bits for SET_NOTIFICATION_ENABLE command */
	#define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(0)
	#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(1)
	#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(2)
	#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(5)
	#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(6)
	#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(7)
	#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(8)
	#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(9)
	#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(11)
	#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(12)
	#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(14)
	#define UCSI_ENABLE_NTFY_ERROR BIT(15)
	#define UCSI_ENABLE_NTFY_ALL 0xdbe7

	/* Error information returned by PPM in response to GET_ERROR_STATUS command. */
	#define UCSI_ERROR_UNREGONIZED_CMD BIT(0)
	#define UCSI_ERROR_INVALID_CON_NUM BIT(1)
	#define UCSI_ERROR_INVALID_CMD_ARGUMENT BIT(2)
	#define UCSI_ERROR_INCOMPATIBLE_PARTNER BIT(3)
	#define UCSI_ERROR_CC_COMMUNICATION_ERR BIT(4)
	#define UCSI_ERROR_DEAD_BATTERY BIT(5)
	#define UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL BIT(6)

	/* Data structure filled by PPM in response to GET_CAPABILITY command. */
	struct ucsi_capability {
	u32 attributes;
	#define UCSI_CAP_ATTR_DISABLE_STATE BIT(0)
	#define UCSI_CAP_ATTR_BATTERY_CHARGING BIT(1)
	#define UCSI_CAP_ATTR_USB_PD BIT(2)
	#define UCSI_CAP_ATTR_TYPEC_CURRENT BIT(6)
	#define UCSI_CAP_ATTR_POWER_AC_SUPPLY BIT(8)
	#define UCSI_CAP_ATTR_POWER_OTHER BIT(10)
	#define UCSI_CAP_ATTR_POWER_VBUS BIT(14)
	u32 num_connectors:8;
	u32 features:24;
	#define UCSI_CAP_SET_UOM BIT(0)
	#define UCSI_CAP_SET_PDM BIT(1)
	#define UCSI_CAP_ALT_MODE_DETAILS BIT(2)
	#define UCSI_CAP_ALT_MODE_OVERRIDE BIT(3)
	#define UCSI_CAP_PDO_DETAILS BIT(4)
	#define UCSI_CAP_CABLE_DETAILS BIT(5)
	#define UCSI_CAP_EXT_SUPPLY_NOTIFICATIONS BIT(6)
	#define UCSI_CAP_PD_RESET BIT(7)
	u8 num_alt_modes;
	u8 reserved;
	u16 bc_version;
	u16 pd_version;
	u16 typec_version;
	} __packed;

	/* Data structure filled by PPM in response to GET_CONNECTOR_CAPABILITY cmd. */
	struct ucsi_connector_capability {
	u8 op_mode;
	#define UCSI_CONCAP_OPMODE_DFP BIT(0)
	#define UCSI_CONCAP_OPMODE_UFP BIT(1)
	#define UCSI_CONCAP_OPMODE_DRP BIT(2)
	#define UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY BIT(3)
	#define UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY BIT(4)
	#define UCSI_CONCAP_OPMODE_USB2 BIT(5)
	#define UCSI_CONCAP_OPMODE_USB3 BIT(6)
	#define UCSI_CONCAP_OPMODE_ALT_MODE BIT(7)
	u8 provider:1;
	u8 consumer:1;
	u8:6; /* reserved */
	} __packed;

	struct ucsi_altmode {
	u16 svid;
	u32 mid;
	} __packed;

	/* Data structure filled by PPM in response to GET_CABLE_PROPERTY command. */
	struct ucsi_cable_property {
	u16 speed_supported;
	u8 current_capability;
	u8 vbus_in_cable:1;
	u8 active_cable:1;
	u8 directionality:1;
	u8 plug_type:2;
	#define UCSI_CABLE_PROPERTY_PLUG_TYPE_A 0
	#define UCSI_CABLE_PROPERTY_PLUG_TYPE_B 1
	#define UCSI_CABLE_PROPERTY_PLUG_TYPE_C 2
	#define UCSI_CABLE_PROPERTY_PLUG_OTHER 3
	u8 mode_support:1;
	u8:2; /* reserved */
	u8 latency:4;
	u8:4; /* reserved */
	} __packed;

	/* Data structure filled by PPM in response to GET_CONNECTOR_STATUS command. */
	struct ucsi_connector_status {
	u16 change;
	#define UCSI_CONSTAT_EXT_SUPPLY_CHANGE BIT(1)
	#define UCSI_CONSTAT_POWER_OPMODE_CHANGE BIT(2)
	#define UCSI_CONSTAT_PDOS_CHANGE BIT(5)
	#define UCSI_CONSTAT_POWER_LEVEL_CHANGE BIT(6)
	#define UCSI_CONSTAT_PD_RESET_COMPLETE BIT(7)
	#define UCSI_CONSTAT_CAM_CHANGE BIT(8)
	#define UCSI_CONSTAT_BC_CHANGE BIT(9)
	#define UCSI_CONSTAT_PARTNER_CHANGE BIT(11)
	#define UCSI_CONSTAT_POWER_DIR_CHANGE BIT(12)
	#define UCSI_CONSTAT_CONNECT_CHANGE BIT(14)
	#define UCSI_CONSTAT_ERROR BIT(15)
	u16 pwr_op_mode:3;
	#define UCSI_CONSTAT_PWR_OPMODE_NONE 0
	#define UCSI_CONSTAT_PWR_OPMODE_DEFAULT 1
	#define UCSI_CONSTAT_PWR_OPMODE_BC 2
	#define UCSI_CONSTAT_PWR_OPMODE_PD 3
	#define UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5 4
	#define UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0 5
	u16 connected:1;
	u16 pwr_dir:1;
	u16 partner_flags:8;
	#define UCSI_CONSTAT_PARTNER_FLAG_USB BIT(0)
	#define UCSI_CONSTAT_PARTNER_FLAG_ALT_MODE BIT(1)
	u16 partner_type:3;
	#define UCSI_CONSTAT_PARTNER_TYPE_DFP 1
	#define UCSI_CONSTAT_PARTNER_TYPE_UFP 2
	#define UCSI_CONSTAT_PARTNER_TYPE_CABLE 3 /* Powered Cable */
	#define UCSI_CONSTAT_PARTNER_TYPE_CABLE_AND_UFP 4 /* Powered Cable */
	#define UCSI_CONSTAT_PARTNER_TYPE_DEBUG 5
	#define UCSI_CONSTAT_PARTNER_TYPE_AUDIO 6
	u32 request_data_obj;
	u8 bc_status:2;
	#define UCSI_CONSTAT_BC_NOT_CHARGING 0
	#define UCSI_CONSTAT_BC_NOMINAL_CHARGING 1
	#define UCSI_CONSTAT_BC_SLOW_CHARGING 2
	#define UCSI_CONSTAT_BC_TRICKLE_CHARGING 3
	u8 provider_cap_limit_reason:4;
	#define UCSI_CONSTAT_CAP_PWR_LOWERED 0
	#define UCSI_CONSTAT_CAP_PWR_BUDGET_LIMIT 1
	u8:2; /* reserved */
	} __packed;

	/* -------------------------------------------------------------------------- */

	struct ucsi;

	struct ucsi_data {
	u16 version;
	u16 reserved;
	union {
	u32 raw_cci;
	struct ucsi_cci cci;
	};
	struct ucsi_control ctrl;
	u32 message_in[4];
	u32 message_out[4];
	} __packed;

	/*
	* struct ucsi_ppm - Interface to UCSI Platform Policy Manager
	* @data: memory location to the UCSI data structures
	* @cmd: UCSI command execution routine
	* @sync: Refresh UCSI mailbox (the data structures)
	*/
	struct ucsi_ppm {
	struct ucsi_data *data;
	int (cmd)(struct ucsi_ppm , struct ucsi_control *);
	int (sync)(struct ucsi_ppm );
	};

	struct ucsi ucsi_register_ppm(struct device dev, struct ucsi_ppm *ppm);
	void ucsi_unregister_ppm(struct ucsi *ucsi);
	void ucsi_notify(struct ucsi *ucsi);

	#endif /* __DRIVER_USB_TYPEC_UCSI_H */