/*
 * Copyright 2018 NXP
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/imx8qm-clock.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/imx_rsrc.h>
#include <dt-bindings/soc/imx8_hsio.h>
#include <dt-bindings/soc/imx8_pd.h>
#include <dt-bindings/pinctrl/pads-imx8qm.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/thermal/thermal.h>

/ {
	model = "Freescale i.MX8QM DOMU";
	compatible = "fsl,imx8qm-lpddr4", "fsl,imx8qm", "xen,xenvm-4.10", "xen,xenvm";
	interrupt-parent = <&gic>;
	#address-cells = <0x2>;
	#size-cells = <0x2>;

	/delete-node/ aliases;

	aliases {
		mmc0 = &usdhc1;
		dpu1 = &dpu2;
		ldb1 = &ldb2;
		serial1 = &lpuart1;
	};

	cpus {
		#address-cells = <0x2>;
		#size-cells = <0x0>;

		cpu@0 {
			device_type = "cpu";
			compatible = "arm,armv8";
			enable-method = "psci";
			reg = <0x0 0x0>;
		};

		cpu@1 {
			device_type = "cpu";
			compatible = "arm,armv8";
			enable-method = "psci";
			reg = <0x0 0x1>;
		};
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "hvc";
	};

	memory@80000000 {
		device_type = "memory";
		/* Will be updated by U-Boot or XEN TOOL */
		reg = <0x00000000 0x40000000 0 0x40000000>;
	};

	gic: interrupt-controller@3001000 {
		compatible = "arm,gic-v3";
		#interrupt-cells = <3>;
		#address-cells = <0x0>;
		interrupt-controller;
		redistributor-stride = <0x20000>;
		#redistributor-regions = <0x1>;
		reg = <0x0 0x3001000 0 0x10000>, /* GIC Dist */
		      <0x0 0x3020000 0 0x1000000>; /* GICR */
		interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
		interrupt-parent = <&gic>;
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
		interrupt-parent = <&gic>;
		clock-frequency = <8000000>;
	};

	hypervisor {
		compatible = "xen,xen-4.11", "xen,xen";
		reg = <0x0 0x38000000 0x0 0x1000000>;
		interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
		interrupt-parent = <&gic>;
	};

	passthrough {
		compatible = "simple-bus";
		ranges;
		#address-cells = <2>;
		#size-cells = <2>;

		firmware {
			android {
				compatible = "android,firmware";
				fstab {
					compatible = "android,fstab";
					vendor {
						compatible = "android,vendor";
						/* emmc node which used if androidboot.storage_type=emmc */
						dev_emmc = "/dev/block/platform/passthrough/15b010000.usdhc/by-name/vendor";
						type = "ext4";
						mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
						fsmgr_flags = "wait,slotselect,avb";
					};
				};

				vbmeta {
					/*we need use FirstStageMountVBootV2 if we enable avb*/
					compatible = "android,vbmeta";
					/*parts means the partition witch can be mount in first stage*/
					parts = "vbmeta,boot,system,vendor";
				};
			};
		};


		clk: clk {
			compatible = "fsl,imx8qm-clk";
			#clock-cells = <1>;
			fsl,lpcg_base_offset = <0x00000001 0x00000000>;
		};

		iomuxc: iomuxc {
			compatible = "fsl,imx8qm-iomuxc";
		};

		#include "fsl-imx8qm-device.dtsi"

		mu2: mu@15d1d0000 {
			compatible = "fsl,imx8-mu";
			reg = <0x1 0x5d1d0000 0x0 0x10000>;
			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
			fsl,scu_ap_mu_id = <0>;
			status = "okay";
		};

		usb_lpcg {
			reg = <0x1 0x5b270000 0x0 0x10000>;
		};

		edma01: dma-controller1@5a1f0000 {
			compatible = "fsl,imx8qm-edma";
			reg = <0x1 0x5a2e0000 0x0 0x10000>, /* channel14 UART1 rx */
			      <0x1 0x5a2f0000 0x0 0x10000>; /* channel15 UART1 tx */
			#dma-cells = <3>;
			dma-channels = <2>;
			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "edma0-chan14-rx", "edma0-chan15-tx";
			status = "okay";
		};
	};
};

/delete-node/ &tsens;
/delete-node/ &thermal_zones;
/delete-node/ &rtc;

&display {
	ports = <&dpu2_disp0>, <&dpu2_disp1>;
};

&dpu2_intsteer {
	reg = <0x1 0x57000000 0x0 0x10000>;
	status = "okay";
};

&prg10 {
	reg = <0x1 0x57040000 0x0 0x10000>;
	status = "okay";
};

&prg11 {
	reg = <0x1 0x57050000 0x0 0x10000>;
	status = "okay";
};

&prg12 {
	reg = <0x1 0x57060000 0x0 0x10000>;
	status = "okay";
};

&prg13 {
	reg = <0x1 0x57070000 0x0 0x10000>;
	status = "okay";
};

&prg14 {
	reg = <0x1 0x57080000 0x0 0x10000>;
	status = "okay";
};

&prg15 {
	reg = <0x1 0x57090000 0x0 0x10000>;
	status = "okay";
};

&prg16 {
	reg = <0x1 0x570a0000 0x0 0x10000>;
	status = "okay";
};

&prg17 {
	reg = <0x1 0x570b0000 0x0 0x10000>;
	status = "okay";
};

&prg18 {
	reg = <0x1 0x570c0000 0x0 0x10000>;
	status = "okay";
};

&dpr3_channel1 {
	reg = <0x1 0x570d0000 0x0 0x10000>;
	status = "okay";
};

&dpr3_channel2 {
	reg = <0x1 0x570e0000 0x0 0x10000>;
	status = "okay";
};

&dpr3_channel3 {
	reg = <0x1 0x570f0000 0x0 0x10000>;
	status = "okay";
};

&dpr4_channel1 {
	reg = <0x1 0x57100000 0x0 0x10000>;
	status = "okay";
};

&dpr4_channel2 {
	reg = <0x1 0x57110000 0x0 0x10000>;
	status = "okay";
};

&dpr4_channel3 {
	reg = <0x1 0x57120000 0x0 0x10000>;
	status = "okay";
};

&dpu2 {
	reg = <0x1 0x57180000 0x0 0x40000>;
	status = "okay";

	dpu2_disp0: port@0 {
		dpu2_disp0_mipi_dsi: mipi-dsi-endpoint {
			/delete-property/ remote-endpoint;
		};
	};
	dpu2_disp1: port@1 {
		reg = <1>;

		dpu2_disp1_lvds0: lvds0-endpoint {
			remote-endpoint = <&ldb2_lvds0>;
		};

		dpu2_disp1_lvds1: lvds1-endpoint {
			remote-endpoint = <&ldb2_lvds1>;
		};
	};
};

/delete-node/ &hdmi;
/delete-node/ &irqsteer_dsi0;
/delete-node/ &i2c0_mipi_dsi0;
/delete-node/ &mipi_dsi_csr1;
/delete-node/ &mipi_dsi_phy1;
/delete-node/ &mipi_dsi1;
/delete-node/ &mipi_dsi_bridge1;

&lvds_region2 {
	reg = <0x1 0x57240000 0x0 0x10000>;
	status = "okay";
};

&ldb2_phy {
	reg = <0x1 0x57241000 0x0 0x100>;
	status = "okay";
};

&ldb2 {
	status = "okay";

	lvds-channel@0 {
		fsl,data-mapping = "jeida";
		fsl,data-width = <24>;
		status = "okay";

		port@1 {
			reg = <1>;

			lvds1_out: endpoint {
				remote-endpoint = <&it6263_1_in>;
			};
		};
	};
};

/delete-node/ &lvds0_pwm;
/delete-node/ &dpu1_intsteer;
/delete-node/ &prg1;
/delete-node/ &prg2;
/delete-node/ &prg3;
/delete-node/ &prg4;
/delete-node/ &prg5;
/delete-node/ &prg6;
/delete-node/ &prg7;
/delete-node/ &prg8;
/delete-node/ &prg9;
/delete-node/ &dpr1_channel1;
/delete-node/ &dpr1_channel2;
/delete-node/ &dpr1_channel3;
/delete-node/ &dpr2_channel1;
/delete-node/ &dpr2_channel2;
/delete-node/ &dpr2_channel3;
/delete-node/ &dpu1;
/delete-node/ &dsp;
/delete-node/ &irqsteer_dsi1;
/delete-node/ &i2c0_mipi_dsi1;
/delete-node/ &mipi_dsi_csr2;
/delete-node/ &mipi_dsi_phy2;
/delete-node/ &mipi_dsi2;
/delete-node/ &mipi_dsi_bridge2;
/delete-node/ &lvds_region1;
/delete-node/ &ldb1_phy;
/delete-node/ &ldb1;
/delete-node/ &lvds1_pwm;
/delete-node/ &camera;
/delete-node/ &adc0;
/delete-node/ &adc1;
/delete-node/ &i2c0;
/delete-node/ &i2c1;
/delete-node/ &i2c2;
/delete-node/ &i2c3;
/delete-node/ &i2c4;
/delete-node/ &i2c0_cm40;
/delete-node/ &i2c0_cm41;
/delete-node/ &irqsteer_hdmi;
/delete-node/ &i2c0_hdmi;

&irqsteer_lvds1 {
	reg = <0x1 0x57240000 0x0 0x1000>;
	/delete-property/ interrupt-parent;
	status = "okay";
};

/delete-node/ &flexcan1;
/delete-node/ &flexcan2;
/delete-node/ &flexcan3;

&i2c1_lvds1 {
	reg = <0x1 0x57247000 0x0 0x1000>;
	status = "okay";
};

/delete-node/ &irqsteer_lvds0;
/delete-node/ &i2c1_lvds0;
/delete-node/ &irqsteer_csi0;
/delete-node/ &i2c0_mipi_csi0;
/delete-node/ &irqsteer_csi1;
/delete-node/ &i2c0_mipi_csi1;
/delete-node/ &lpspi0;
/delete-node/ &lpspi3;
/delete-node/ &lpuart0;

&lpuart1 {
	/delete-property/ interrupt-parent;
	reg = <0x1 0x5a070000 0 0x1000>;
	dmas = <&edma01 15 0 0>, <&edma01 14 0 1>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpuart1>;
	status = "okay";
};

/delete-node/ &lpuart2;
/delete-node/ &lpuart3;
/delete-node/ &lpuart4;
/delete-node/ &emvsim0;
/delete-node/ &edma0;
/delete-node/ &edma2;
/delete-node/ &edma3;
/delete-node/ &gpio0;
/delete-node/ &gpio1;
/delete-node/ &gpio2;
/delete-node/ &gpio3;
/delete-node/ &gpio4;
/delete-node/ &gpio5;
/delete-node/ &gpio6;
/delete-node/ &gpio7;
/delete-node/ &gpio0_mipi_csi0;
/delete-node/ &gpio0_mipi_csi1;
/delete-node/ &gpt0;
/delete-node/ &pwm0;
/delete-node/ &pwm1;
/delete-node/ &pwm2;
/delete-node/ &pwm3;
/delete-node/ &pwm4;
/delete-node/ &pwm5;
/delete-node/ &pwm6;
/delete-node/ &pwm7;

&gpu_3d1 {
	reg = <0x0 0x24100000 0 0x40000>;
	status = "okay";
};

/delete-node/ &gpu_3d0;

&imx8_gpu_ss {
	/* xen guests have 3GB of low RAM @ 1GB */
	reg = <0x0 0x40000000 0x0 0xc0000000>;
	reg-names = "phys_baseaddr";
	cores = <&gpu_3d1>;
	status = "okay";
};

/delete-node/ &mlb;

&usdhc1 {
	compatible = "fsl,imx8qm-usdhc", "fsl,imx6sl-usdhc";
	/*interrupt-parent = <&gic>;*/
	/delete-property/ interrupt-parent;
	reg = <0x1 0x5b010000 0x0 0x10000>;
};

/delete-node/ &usdhc2;
/delete-node/ &usdhc3;
/delete-node/ &fec1;
/delete-node/ &fec2;

&usbmisc1 {
	reg = <0x1 0x5b0d0200 0x0 0x200>;
};

/delete-node/ &usbmisc2;

&usbphy1 {
	reg = <0x1 0x5b100000 0x0 0x200>;
};

/delete-node/ &usbh1;
/delete-node/ &usbotg3;
/delete-node/ &usbphynop1;
/delete-node/ &usbphynop2;

&usbotg1 {
	reg = <0x1 0x5b0d0000 0x0 0x200>;
	/delete-property/ interrupt-parent;
};

/delete-node/ &ddr_pmu0;
/delete-node/ &ddr_pmu1;
/delete-node/ &vpu;
/delete-node/ &acm;
/delete-node/ &esai0;
/delete-node/ &esai1;
/delete-node/ &spdif0;
/delete-node/ &spdif1;
/delete-node/ &sai1;
/delete-node/ &sai0;
/delete-node/ &sai2;
/delete-node/ &sai3;
/delete-node/ &sai_hdmi_rx;
/delete-node/ &sai_hdmi_tx;
/delete-node/ &sai6;
/delete-node/ &sai7;
/delete-node/ &amix;
/delete-node/ &asrc0;
/delete-node/ &asrc1;
/delete-node/ &mqs;
/delete-node/ &flexspi0;

&dma_cap {
	compatible = "dma-capability";
	only-dma-mask32 = <1>;
};

/delete-node/ &hsio;
/delete-node/ &ocotp;
/delete-node/ &pciea;
/delete-node/ &pcieb;
/delete-node/ &sata;

/delete-node/ &intmux_cm40;
/delete-node/ &intmux_cm41;
/delete-node/ &imx_rpmsg;
/delete-node/ &crypto;
/delete-node/ &caam_sm;
/delete-node/ &sc_pwrkey;
/delete-node/ &wdog;
/delete-node/ &wu;

&iomuxc {
	imx8qm-mek {
		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000041
				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
			>;
		};

		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
			fsl,pins = <
				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000040
				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
			>;
		};

		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
			fsl,pins = <
				SC_P_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
				SC_P_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
				SC_P_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
				SC_P_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
				SC_P_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
				SC_P_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
				SC_P_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
				SC_P_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
				SC_P_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
				SC_P_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
				SC_P_EMMC0_STROBE_CONN_EMMC0_STROBE	0x06000040
				SC_P_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
			>;
		};

		pinctrl_usbotg1: usbotg1 {
			fsl,pins = <
				SC_P_USB_SS3_TC0_CONN_USB_OTG1_PWR		0x00000021
			>;
		};

		pinctrl_lvds1_lpi2c1: lvds1lpi2c1grp {
			fsl,pins = <
				SC_P_LVDS1_I2C1_SCL_LVDS1_I2C1_SCL	0xc600004c
				SC_P_LVDS1_I2C1_SDA_LVDS1_I2C1_SDA	0xc600004c
			>;
		};

		pinctrl_lpuart1: lpuart1grp {
			fsl,pins = <
				SC_P_UART1_RX_DMA_UART1_RX		0x06000020
				SC_P_UART1_TX_DMA_UART1_TX		0x06000020
				SC_P_UART1_CTS_B_DMA_UART1_CTS_B	0x06000020
				SC_P_UART1_RTS_B_DMA_UART1_RTS_B	0x06000020
				SC_P_QSPI1A_DQS_LSIO_GPIO4_IO22		0x00000021
			>;
		};
	};
};

&usdhc1 {
	/delete-property/ iommus;
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&usbotg1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	srp-disable;
	hnp-disable;
	adp-disable;
	power-polarity-active-high;
	disable-over-current;
	status = "okay";
};

&i2c1_lvds1 {
	#address-cells = <1>;
	#size-cells = <0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lvds1_lpi2c1>;
	clock-frequency = <100000>;
	status = "okay";

	lvds-to-hdmi-bridge@4c {
		compatible = "ite,it6263";
		reg = <0x4c>;

		port {
			it6263_1_in: endpoint {
				clock-lanes = <3>;
				data-lanes = <0 1 2 4>;
				remote-endpoint = <&lvds1_out>;
			};
		};
	};
};