/*
 * Copyright 2018 NXP
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/dts-v1/;

#include "fsl-imx8mm.dtsi"

/ {
	model = "FSL i.MX8MM Columbia board";
	compatible = "fsl,imx8mm-columbia", "fsl,imx8mm";

	chosen {
		bootargs = "console=ttymxc1,115200 earlycon=ec_imx6q,0x30890000,115200";
		stdout-path = &uart2;
	};

	leds {
		compatible = "gpio-leds";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_gpio_led>;

		status {
			label = "status";
			gpios = <&gpio3 16 0>;
			default-state = "on";
		};
	};

	modem_reset: modem-reset {
		compatible = "gpio-reset";
		reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
		reset-delay-us = <2000>;
		reset-post-delay-ms = <40>;
		#reset-cells = <0>;
	};

	ir_recv: ir-receiver {
		compatible = "gpio-ir-receiver";
		gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ir_recv>;
	};

	apex_power {
		compatible = "google,apex-power";
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_apex_pmic>;
		power-supply = <&reg_apex>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_sd1_vmmc: sd1_regulator {
			compatible = "regulator-fixed";
			regulator-name = "WLAN_EN";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio2 10 GPIO_ACTIVE_HIGH>;
			off-on-delay = <20000>;
			startup-delay-us = <100>;
			enable-active-high;
		};

		reg_usdhc2_vmmc: regulator-usdhc2 {
			compatible = "regulator-fixed";
			regulator-name = "VSD_3V3";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
			off-on-delay = <20000>;
			enable-active-high;
		};

		reg_audio_board: regulator-audio-board {
			compatible = "regulator-fixed";
			regulator-name = "EXT_PWREN";
			regulator-min-microvolt = <3300000>;
			regulator-max-microvolt = <3300000>;
			enable-active-high;
			startup-delay-us = <300000>;
			gpio = <&pca6416 1 GPIO_ACTIVE_HIGH>;
		};

		reg_apex: apex_pmic {
			compatible = "regulator-fixed";
			regulator-name = "apex_regulators";
			regulator-min-microvolt = <1800000>;
			regulator-max-microvolt = <1800000>;
			gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
			enable-active-high;
			regulator-always-on;
			startup-delay-us = <500000>;
		};
	};

};

&clk {
	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>, <&clk IMX8MM_AUDIO_PLL2>;
	assigned-clock-rates = <786432000>, <722534400>;
};

&iomuxc {
	pinctrl-names = "default";

	imx8mm-evk {
		pinctrl_csi_pwn: csi_pwn_grp {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x19
			>;
		};

		pinctrl_ir_recv: ir_recv {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13		0x14f
			>;
		};

		pinctrl_csi_rst: csi_rst_grp {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6		0x19
				MX8MM_IOMUXC_GPIO1_IO14_CCMSRCGPCMIX_CLKO1	0x59
			>;
		};

		pinctrl_mipi_dsi_en: mipi_dsi_en {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x16
			>;
		};

		pinctrl_i2c2_synaptics_dsx_io: synaptics_dsx_iogrp {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19	/* Touch int */
			>;
		};

		pinctrl_fec1: fec1grp {
			fsl,pins = <
				MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x3
				MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO	0x3
				MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x1f
				MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x1f
				MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x1f
				MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x1f
				MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x91
				MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x91
				MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x91
				MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x91
				MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x1f
				MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x91
				MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
				MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
				MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22	0x19
			>;
		};
    /* Disabled for now */
		pinctrl_flexspi0: flexspi0grp {
			fsl,pins = <
				MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x1c2
				MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B		0x82
				MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2		0x82
				MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3		0x82
			>;
		};

		pinctrl_gpio_led: gpioledgrp {
			fsl,pins = <
				MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x19
			>;
		};

		pinctrl_i2c1: i2c1grp {
			fsl,pins = <
				MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL			0x400001c3
				MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA			0x400001c3
			>;
		};

		pinctrl_i2c2: i2c2grp {
			fsl,pins = <
				MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x400001c3
				MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x400001c3
			>;
		};

		pinctrl_i2c3: i2c3grp {
			fsl,pins = <
				MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL			0x400001c3
				MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA			0x400001c3
			>;
		};

		pinctrl_apex_pmic: apexpmicgrp {
			fsl,pins = <
			  MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x41  /* open drain, pull down */
			>;
		};

		pinctrl_pcie0: pcie0grp {
			fsl,pins = <
				MX8MM_IOMUXC_I2C4_SCL_PCIE1_CLKREQ_B	0x61 /* open drain, pull up */
				MX8MM_IOMUXC_NAND_DATA00_GPIO3_IO6	0x51  /* APEX_SYS_RST_L */
			>;
		};

		pinctrl_pmic: pmicirq {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3		0x41
			>;
		};

		pinctrl_typec1: typec1grp {
			fsl,pins = <
				MX8MM_IOMUXC_SD1_STROBE_GPIO2_IO11	0x159
			>;
		};

		pinctrl_typec2: typec2grp {
			fsl,pins = <
				MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12	0x159
			>;
		};

		pinctrl_sai1: sai1grp {
			fsl,pins = <
				MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK	0xd6
				MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC	0xd6
				MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_SYNC	0xd6
				MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK	0xd6
				MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0	0xd6
				MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1	0xd6
				MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2	0xd6
				MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3	0xd6
				MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4	0xd6
				MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5	0xd6
				MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6	0xd6
				MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7	0xd6
			>;
		};

		pinctrl_sai1_dsd: sai1grp_dsd {
			fsl,pins = <
				MX8MM_IOMUXC_SAI1_MCLK_SAI1_MCLK	0xd6
				MX8MM_IOMUXC_SAI1_TXFS_SAI1_TX_SYNC	0xd6
				MX8MM_IOMUXC_SAI1_RXD7_SAI1_TX_DATA4	0xd6
				MX8MM_IOMUXC_SAI1_TXC_SAI1_TX_BCLK	0xd6
				MX8MM_IOMUXC_SAI1_TXD0_SAI1_TX_DATA0	0xd6
				MX8MM_IOMUXC_SAI1_TXD1_SAI1_TX_DATA1	0xd6
				MX8MM_IOMUXC_SAI1_TXD2_SAI1_TX_DATA2	0xd6
				MX8MM_IOMUXC_SAI1_TXD3_SAI1_TX_DATA3	0xd6
				MX8MM_IOMUXC_SAI1_TXD4_SAI1_TX_DATA4	0xd6
				MX8MM_IOMUXC_SAI1_TXD5_SAI1_TX_DATA5	0xd6
				MX8MM_IOMUXC_SAI1_TXD6_SAI1_TX_DATA6	0xd6
				MX8MM_IOMUXC_SAI1_TXD7_SAI1_TX_DATA7	0xd6
			>;
		};

		pinctrl_sai3: sai3grp {
			fsl,pins = <
				MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC     0xd6
				MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK      0xd6
				MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK        0xd6
				MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0     0xd6
				MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21        0xd6
			>;
		};

		pinctrl_sai5: sai5grp {
			fsl,pins = <
				MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
				MX8MM_IOMUXC_SAI5_RXC_SAI5_RX_BCLK	0xd6
				MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
				MX8MM_IOMUXC_SAI5_RXD0_SAI5_RX_DATA0	0xd6
				MX8MM_IOMUXC_SAI5_RXD1_SAI5_RX_DATA1    0xd6
				MX8MM_IOMUXC_SAI5_RXD2_SAI5_RX_DATA2    0xd6
				MX8MM_IOMUXC_SAI5_RXD3_SAI5_RX_DATA3    0xd6
			>;
		};

		pinctrl_pdm: pdmgrp {
			fsl,pins = <
				MX8MM_IOMUXC_SAI5_MCLK_SAI5_MCLK	0xd6
				MX8MM_IOMUXC_SAI5_RXC_PDM_CLK		0xd6
				MX8MM_IOMUXC_SAI5_RXFS_SAI5_RX_SYNC	0xd6
				MX8MM_IOMUXC_SAI5_RXD0_PDM_DATA0	0xd6
				MX8MM_IOMUXC_SAI5_RXD1_PDM_DATA1	0xd6
				MX8MM_IOMUXC_SAI5_RXD2_PDM_DATA2	0xd6
				MX8MM_IOMUXC_SAI5_RXD3_PDM_DATA3	0xd6
			>;
		};

		pinctrl_spdif1: spdif1grp {
			fsl,pins = <
				MX8MM_IOMUXC_SPDIF_TX_SPDIF1_OUT	0xd6
				MX8MM_IOMUXC_SPDIF_RX_SPDIF1_IN		0xd6
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX	0x140
				MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX	0x140
				MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B	0x140
				MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B	0x140
				MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6	0x19
			>;
		};

		pinctrl_uart2: uart2grp {
			fsl,pins = <
				MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX	0x140
				MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX	0x140
			>;
		};

		pinctrl_uart3: uart3grp {
			fsl,pins = <
				MX8MM_IOMUXC_ECSPI1_SCLK_UART3_DCE_RX		0x140
				MX8MM_IOMUXC_ECSPI1_MOSI_UART3_DCE_TX		0x140
				MX8MM_IOMUXC_ECSPI1_SS0_UART3_DCE_RTS_B		0x140
				MX8MM_IOMUXC_ECSPI1_MISO_UART3_DCE_CTS_B	0x140
			>;
		};

		pinctrl_usdhc1_gpio: usdhc1grpgpio {
			fsl,pins = <
				MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10	0x41
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x190
				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d0
				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d0
				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d0
				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d0
				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d0
			>;
		};

		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
			fsl,pins = <
				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x194
				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d4
				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d4
				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d4
				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d4
				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d4
			>;
		};

		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
			fsl,pins = <
				MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK		0x196
				MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD		0x1d6
				MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0	0x1d6
				MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1	0x1d6
				MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2	0x1d6
				MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3	0x1d6
			>;
		};

		pinctrl_usdhc2_gpio: usdhc2grpgpio {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x1c4
				MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19	0x41
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x190
				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d0
				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d0
				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d0
				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d0
				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d0
				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			>;
		};

		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
			fsl,pins = <
				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x194
				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4
				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d4
				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d4
				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d4
				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d4
				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			>;
		};

		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
			fsl,pins = <
				MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x196
				MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d6
				MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0	0x1d6
				MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1	0x1d6
				MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2	0x1d6
				MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3	0x1d6
				MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x1d0
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x190
				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d0
				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d0
				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d0
				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d0
				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d0
				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d0
				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d0
				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d0
				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d0
				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x190
			>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
			fsl,pins = <
				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x194
				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d4
				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d4
				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d4
				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d4
				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d4
				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4
				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d4
				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d4
				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4
				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x194
			>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
			fsl,pins = <
				MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x196
				MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d6
				MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0		0x1d6
				MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1		0x1d6
				MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2		0x1d6
				MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3		0x1d6
				MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d6
				MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5		0x1d6
				MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6		0x1d6
				MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d6
				MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 		0x196
			>;
		};

		pinctrl_wdog: wdoggrp {
			fsl,pins = <
				MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B		0xc6
			>;
		};

		pinctrl_usb2514b: usb2514bgrp {
			fsl,pins = <
				MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x41
			>;
		};
	};
};

&csi1_bridge {
	fsl,mipi-mode;
	status = "okay";
	port {
		csi1_ep: endpoint {
			remote-endpoint = <&csi1_mipi_ep>;
		};
	};
};

&flexspi {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi0>;
	status = "disabled";

	flash0: mt25qu256aba@0 {
		reg = <0>;
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "micron,mt25qu256aba";
		spi-max-frequency = <80000000>;
		spi-nor,ddr-quad-read-dummy = <6>;
	};
};

&i2c1 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c1>;
	status = "okay";

	pmic: bd71837@4b {
		reg = <0x4b>;
		compatible = "rohm,bd71840", "rohm,bd71837";
		/* PMIC BD71837 PMIC_nINT GPIO1_IO3 */
		pinctrl-0 = <&pinctrl_pmic>;
		gpio_intr = <&gpio1 3 GPIO_ACTIVE_LOW>;

		gpo {
			rohm,drv = <0x0C>;	/* 0b0000_1100 all gpos with cmos output mode */
		};

		regulators {
			#address-cells = <1>;
			#size-cells = <0>;

			bd71837,pmic-buck2-uses-i2c-dvs;
			bd71837,pmic-buck2-dvs-voltage = <1000000>, <900000>, <0>; /* VDD_ARM: Run-Idle */

			buck1_reg: regulator@0 {
				reg = <0>;
				regulator-compatible = "buck1";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <1250>;
			};

			buck2_reg: regulator@1 {
				reg = <1>;
				regulator-compatible = "buck2";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
				regulator-boot-on;
				regulator-always-on;
				regulator-ramp-delay = <1250>;
			};

			buck3_reg: regulator@2 {
				reg = <2>;
				regulator-compatible = "buck3";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
			};

			buck4_reg: regulator@3 {
				reg = <3>;
				regulator-compatible = "buck4";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1300000>;
			};

			buck5_reg: regulator@4 {
				reg = <4>;
				regulator-compatible = "buck5";
				regulator-min-microvolt = <700000>;
				regulator-max-microvolt = <1350000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck6_reg: regulator@5 {
				reg = <5>;
				regulator-compatible = "buck6";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck7_reg: regulator@6 {
				reg = <6>;
				regulator-compatible = "buck7";
				regulator-min-microvolt = <1605000>;
				regulator-max-microvolt = <1995000>;
				regulator-boot-on;
				regulator-always-on;
			};

			buck8_reg: regulator@7 {
				reg = <7>;
				regulator-compatible = "buck8";
				regulator-min-microvolt = <800000>;
				regulator-max-microvolt = <1400000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo1_reg: regulator@8 {
				reg = <8>;
				regulator-compatible = "ldo1";
				regulator-min-microvolt = <3000000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo2_reg: regulator@9 {
				reg = <9>;
				regulator-compatible = "ldo2";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <900000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo3_reg: regulator@10 {
				reg = <10>;
				regulator-compatible = "ldo3";
				regulator-min-microvolt = <1800000>;
				regulator-max-microvolt = <3300000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo4_reg: regulator@11 {
				reg = <11>;
				regulator-compatible = "ldo4";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};

			ldo6_reg: regulator@13 {
				reg = <13>;
				regulator-compatible = "ldo6";
				regulator-min-microvolt = <900000>;
				regulator-max-microvolt = <1800000>;
				regulator-boot-on;
				regulator-always-on;
			};
		};
	};
};

&i2c2 {
	clock-frequency = <400000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";

	adv_bridge: adv7535@3d {
		compatible = "adi,adv7533";
		reg = <0x3d>;
		adi,addr-cec = <0x3b>;
		adi,dsi-lanes = <4>;
		status = "okay";

		port {
			adv7535_from_dsim: endpoint {
				remote-endpoint = <&dsim_to_adv7535>;
			};
		};
	};

	typec1_ptn5110: tcpci@50 {
		compatible = "usb,tcpci";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_typec1>;
		reg = <0x50>;
		interrupt-parent = <&gpio2>;
		interrupts = <11 8>;
		src-pdos = <0x380190c8>;
		snk-pdos = <0x380190c8>;
		/* Only can sink 5V for safe */
		max-snk-mv = <5000>;
		max-snk-ma = <3000>;
		op-snk-mw = <10000>;
		max-snk-mw = <15000>;
		port-type = "drp";
		default-role = "sink";
		status = "okay";
	};

	typec2_ptn5110: tcpci@52 {
		compatible = "usb,tcpci";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_typec2>;
		reg = <0x52>;
		interrupt-parent = <&gpio2>;
		interrupts = <12 8>;
		src-pdos = <0x380190c8>;
		snk-pdos = <0x380190c8>;
		/* Only can sink 5V for safe */
		max-snk-mv = <5000>;
		max-snk-ma = <3000>;
		op-snk-mw = <10000>;
		max-snk-mw = <15000>;
		port-type = "drp";
		default-role = "sink";
		status = "okay";
	};
};


&mipi_csi_1 {
	#address-cells = <1>;
	#size-cells = <0>;
	status = "okay";
	port {
		mipi1_sensor_ep: endpoint1 {
			remote-endpoint = <&ov5640_mipi1_ep>;
			data-lanes = <2>;
			csis-hs-settle = <13>;
			csis-clk-settle = <2>;
			csis-wclk;
		};

		csi1_mipi_ep: endpoint2 {
			remote-endpoint = <&csi1_ep>;
		};
	};
};

&i2c3 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c3>;
	status = "okay";

	pca6416: gpio@20 {
		compatible = "ti,tca6416";
		reg = <0x20>;
		gpio-controller;
		#gpio-cells = <2>;
	};

	ov5640_mipi: ov5640_mipi@3c {
		compatible = "ovti,ov5640_mipi";
		reg = <0x3c>;
		status = "okay";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_csi_pwn>, <&pinctrl_csi_rst>;
		clocks = <&clk IMX8MM_CLK_CLKO1_DIV>;
		clock-names = "csi_mclk";
		assigned-clocks = <&clk IMX8MM_CLK_CLKO1_SRC>,
				  <&clk IMX8MM_CLK_CLKO1_DIV>;
		assigned-clock-parents = <&clk IMX8MM_CLK_24M>;
		assigned-clock-rates = <0>, <24000000>;
		csi_id = <0>;
		pwn-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
		mclk = <24000000>;
		mclk_source = <0>;
		port {
			ov5640_mipi1_ep: endpoint {
				remote-endpoint = <&mipi1_sensor_ep>;
			};
		};
	};

	usb2514b: usb2514b@2c {
		compatible = "microchip,usb2514b";
		reg = <0x2c>;
		reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usb2514b>;
		swap-dx-lanes = <1 2 3 4>;
	};

	led_driver: ktd2027@30 {
		compatible = "kinetic,ktd2026";
		reg = <0x30>;
		status = "okay";
	};
};

&lcdif {
	status = "okay";
};

&mipi_dsi {
	status = "okay";

	port@1 {
		dsim_to_adv7535: endpoint {
			remote-endpoint = <&adv7535_from_dsim>;
		};
	};
};

&mu {
	status = "okay";
};

&sai1 {
	pinctrl-names = "default", "dsd";
	pinctrl-0 = <&pinctrl_sai1>;
	pinctrl-1 = <&pinctrl_sai1_dsd>;
	assigned-clocks = <&clk IMX8MM_CLK_SAI1_SRC>,
			<&clk IMX8MM_CLK_SAI1_DIV>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <0>, <49152000>;
	clocks = <&clk IMX8MM_CLK_SAI1_IPG>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_SAI1_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
		<&clk IMX8MM_AUDIO_PLL2_OUT>;
	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
	fsl,sai-multi-lane;
	fsl,dataline,dsd = <0 0xff 0xff 2 0xff 0x11>;
	dmas = <&sdma2 0 26 0>, <&sdma2 1 26 0>;
	status = "okay";
};

&sai3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai3>;
	assigned-clocks = <&clk IMX8MM_CLK_SAI3_SRC>,
			<&clk IMX8MM_CLK_SAI3_DIV>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <0>, <24576000>;
	status = "okay";
};

&sai5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai5>;
	assigned-clocks = <&clk IMX8MM_CLK_SAI5_SRC>,
			<&clk IMX8MM_CLK_SAI5_DIV>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <0>, <49152000>;
	clocks = <&clk IMX8MM_CLK_SAI5_IPG>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_SAI5_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
		<&clk IMX8MM_AUDIO_PLL2_OUT>;
	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
	fsl,sai-asynchronous;
	status = "disabled";
};

&spdif1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_spdif1>;
	assigned-clocks = <&clk IMX8MM_CLK_SPDIF1_SRC>,
			<&clk IMX8MM_CLK_SPDIF1_DIV>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <0>, <24576000>;
	clocks = <&clk IMX8MM_CLK_AUDIO_AHB_DIV>, <&clk IMX8MM_CLK_24M>,
		<&clk IMX8MM_CLK_SPDIF1_DIV>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_AUDIO_AHB_DIV>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>,
		<&clk IMX8MM_AUDIO_PLL1_OUT>, <&clk IMX8MM_AUDIO_PLL2_OUT>;
	clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3",
		"rxtx4", "rxtx5", "rxtx6", "rxtx7", "spba", "pll8k", "pll11k";
	status = "disabled";
};

&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec1>;
	phy-mode = "rgmii-id";
	phy-handle = <&ethphy0>;
	fsl,magic-packet;
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {
			compatible = "ethernet-phy-ieee802.3-c22";
			reg = <0>;
			at803x,led-act-blind-workaround;
			at803x,eee-okay;
			at803x,vddio-1p8v;
		};
	};
};

&pcie0{
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pcie0>;
	reset-gpio = <&gpio3 6 GPIO_ACTIVE_LOW>;
	ext_osc = <1>;
	hard-wired = <1>;
	status = "okay";
};

&uart1 { /* BT */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	assigned-clocks = <&clk IMX8MM_CLK_UART1_SRC>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	fsl,uart-has-rtscts;
	resets = <&modem_reset>;
	status = "okay";
};

&uart2 { /* console */
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
	status = "okay";
};

&uart3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart3>;
	assigned-clocks = <&clk IMX8MM_CLK_UART3_SRC>;
	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;
	fsl,uart-has-rtscts;
	status = "okay";
};

&usbotg1 {
	dr_mode = "otg";
	extcon = <0>, <&typec1_ptn5110>;
	picophy,pre-emp-curr-control = <3>;
	picophy,dc-vol-level-adjust = <7>;
	status = "okay";
};

&usbotg2 {
	dr_mode = "host";
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>, <&pinctrl_usdhc1_gpio>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>, <&pinctrl_usdhc1_gpio>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>, <&pinctrl_usdhc1_gpio>;
	bus-width = <4>;
	vmmc-supply = <&reg_sd1_vmmc>;
	pm-ignore-notify;
	keep-power-in-suspend;
	non-removable;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
	cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
	bus-width = <4>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};

&wdog1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_wdog>;
	fsl,ext-reset-output;
	status = "okay";
};

&A53_0 {
	arm-supply = <&buck2_reg>;
};

&gpu {
	status = "okay";
};

&vpu_g1 {
	status = "okay";
};

&vpu_g2 {
	status = "okay";
};

&vpu_h1 {
	status = "okay";
};

&micfil {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_pdm>;
	assigned-clocks = <&clk IMX8MM_CLK_PDM_SRC>, <&clk IMX8MM_CLK_PDM_DIV>;
	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
	assigned-clock-rates = <0>, <196608000>;
	status = "okay";
};