ARM: mx3: dynamically allocate fsl-usb2-udc devices
While adapting the #defines for this I noticed that the offset
used for USB HS on i.MX35 differs from the documented offset.
I kept the working offset and commented that the documentation
differs.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
index 42c3923..59c33f6 100644
--- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
+++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c
@@ -25,6 +25,16 @@
imx_fsl_usb2_udc_data_entry_single(MX27);
#endif /* ifdef CONFIG_SOC_IMX27 */
+#ifdef CONFIG_SOC_IMX31
+const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX31);
+#endif /* ifdef CONFIG_SOC_IMX31 */
+
+#ifdef CONFIG_SOC_IMX35
+const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
+ imx_fsl_usb2_udc_data_entry_single(MX35);
+#endif /* ifdef CONFIG_SOC_IMX35 */
+
struct platform_device *__init imx_add_fsl_usb2_udc(
const struct imx_fsl_usb2_udc_data *data,
const struct fsl_usb2_platform_data *pdata)
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index d024c9c..09232314 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -24,7 +24,10 @@
#define MX31_ECT_CTIO_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x18000)
#define MX31_I2C1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x80000)
#define MX31_I2C3_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x84000)
-#define MX31_OTG_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_USB_OTG_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0000)
+#define MX31_USB_HS1_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0200)
+#define MX31_USB_HS2_BASE_ADDR (MX31_USB_BASE_ADDR + 0x0400)
#define MX31_ATA_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x8c000)
#define MX31_UART1_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x90000)
#define MX31_UART2_BASE_ADDR (MX31_AIPS1_BASE_ADDR + 0x94000)
@@ -161,10 +164,9 @@
#define MX31_INT_UART2 32
#define MX31_INT_NFC 33
#define MX31_INT_SDMA 34
-#define MX31_INT_USB1 35
-#define MX31_INT_USB2 36
-#define MX31_INT_USB3 37
-#define MX31_INT_USB4 38
+#define MX31_INT_USB_HS1 35
+#define MX31_INT_USB_HS2 36
+#define MX31_INT_USB_OTG 37
#define MX31_INT_MSHC1 39
#define MX31_INT_MSHC2 40
#define MX31_INT_IPU_ERR 41
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index 9067225..0fa3f68 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -65,8 +65,14 @@
#define MX35_CAN2_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xe8000)
#define MX35_RTIC_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xec000)
#define MX35_IIM_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf0000)
-
-#define MX35_OTG_BASE_ADDR 0x53ff4000
+#define MX35_USB_BASE_ADDR (MX35_AIPS2_BASE_ADDR + 0xf4000)
+#define MX35_USB_OTG_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0000)
+/*
+ * The Reference Manual (IMX35RM, Rev. 2, 3/2009) claims an offset of 0x200 for
+ * HS. When host support was implemented only a preliminary document was
+ * available, which told 0x400. This works fine.
+ */
+#define MX35_USB_HS_BASE_ADDR (MX35_USB_BASE_ADDR + 0x0400)
#define MX35_ROMP_BASE_ADDR 0x60000000
#define MX35_ROMP_SIZE SZ_1M
@@ -143,8 +149,8 @@
#define MX35_INT_UART2 32
#define MX35_INT_NFC 33
#define MX35_INT_SDMA 34
-#define MX35_INT_USBHS 35
-#define MX35_INT_USBOTG 37
+#define MX35_INT_USB_HS 35
+#define MX35_INT_USB_OTG 37
#define MX35_INT_MSHC1 39
#define MX35_INT_ESAI 40
#define MX35_INT_IPU_ERR 41
