generic irqs: handle failure of irqchip->set_type in setup_irq
set_type returns an int indicating success or failure, but up to now
setup_irq ignores that.
In my case this resulted in a machine hang:
gpio-keys requested IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, but
arm/ns9xxx can only trigger on one direction so set_type didn't touch
the configuration which happens do default to a level sensitiveness and
returned -EINVAL. setup_irq ignored that and unmasked the irq. This
resulted in an endless triggering of the gpio-key interrupt service
routine which effectively killed the machine.
With this patch applied setup_irq propagates the error to the caller.
Note that before in the case
chip && !chip->set_type && !chip->name
a NULL pointer was feed to printk. This is fixed, too.
Signed-off-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 3cfc0fe..5bc6e5e 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -308,6 +308,30 @@
desc->handle_irq = NULL;
}
+static int __irq_set_trigger(struct irq_chip *chip, unsigned int irq,
+ unsigned long flags)
+{
+ int ret;
+
+ if (!chip || !chip->set_type) {
+ /*
+ * IRQF_TRIGGER_* but the PIC does not support multiple
+ * flow-types?
+ */
+ pr_warning("No set_type function for IRQ %d (%s)\n", irq,
+ chip ? (chip->name ? : "unknown") : "unknown");
+ return 0;
+ }
+
+ ret = chip->set_type(irq, flags & IRQF_TRIGGER_MASK);
+
+ if (ret)
+ pr_err("setting flow type for irq %u failed (%pF)\n",
+ irq, chip->set_type);
+
+ return ret;
+}
+
/*
* Internal function to register an irqaction - typically used to
* allocate special interrupts that are part of the architecture.
@@ -319,6 +343,7 @@
const char *old_name = NULL;
unsigned long flags;
int shared = 0;
+ int ret;
if (irq >= NR_IRQS)
return -EINVAL;
@@ -376,36 +401,24 @@
shared = 1;
}
- *p = new;
-
- /* Exclude IRQ from balancing */
- if (new->flags & IRQF_NOBALANCING)
- desc->status |= IRQ_NO_BALANCING;
-
if (!shared) {
irq_chip_set_defaults(desc->chip);
+ /* Setup the type (level, edge polarity) if configured: */
+ if (new->flags & IRQF_TRIGGER_MASK) {
+ ret = __irq_set_trigger(desc->chip, irq, new->flags);
+
+ if (ret) {
+ spin_unlock_irqrestore(&desc->lock, flags);
+ return ret;
+ }
+ } else
+ compat_irq_chip_set_default_handler(desc);
#if defined(CONFIG_IRQ_PER_CPU)
if (new->flags & IRQF_PERCPU)
desc->status |= IRQ_PER_CPU;
#endif
- /* Setup the type (level, edge polarity) if configured: */
- if (new->flags & IRQF_TRIGGER_MASK) {
- if (desc->chip->set_type)
- desc->chip->set_type(irq,
- new->flags & IRQF_TRIGGER_MASK);
- else
- /*
- * IRQF_TRIGGER_* but the PIC does not support
- * multiple flow-types?
- */
- printk(KERN_WARNING "No IRQF_TRIGGER set_type "
- "function for IRQ %d (%s)\n", irq,
- desc->chip->name);
- } else
- compat_irq_chip_set_default_handler(desc);
-
desc->status &= ~(IRQ_AUTODETECT | IRQ_WAITING |
IRQ_INPROGRESS | IRQ_SPURIOUS_DISABLED);
@@ -423,6 +436,13 @@
/* Set default affinity mask once everything is setup */
irq_select_affinity(irq);
}
+
+ *p = new;
+
+ /* Exclude IRQ from balancing */
+ if (new->flags & IRQF_NOBALANCING)
+ desc->status |= IRQ_NO_BALANCING;
+
/* Reset broken irq detection when installing new handler */
desc->irq_count = 0;
desc->irqs_unhandled = 0;
