diff --git a/drivers/char/drm/Kconfig b/drivers/char/drm/Kconfig
index 123417e..d6c50312 100644
--- a/drivers/char/drm/Kconfig
+++ b/drivers/char/drm/Kconfig
@@ -82,7 +82,7 @@
 
 config DRM_MGA
 	tristate "Matrox g200/g400"
-	depends on DRM && AGP
+	depends on DRM
 	help
 	  Choose this option if you have a Matrox G200, G400 or G450 graphics
 	  card.  If M is selected, the module will be called mga.  AGP
diff --git a/drivers/char/drm/mga_dma.c b/drivers/char/drm/mga_dma.c
index 832eaf8..7899e28 100644
--- a/drivers/char/drm/mga_dma.c
+++ b/drivers/char/drm/mga_dma.c
@@ -23,18 +23,21 @@
  * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
  * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  * DEALINGS IN THE SOFTWARE.
- *
- * Authors:
- *    Rickard E. (Rik) Faith <faith@valinux.com>
- *    Jeff Hartmann <jhartmann@valinux.com>
- *    Keith Whitwell <keith@tungstengraphics.com>
- *
- * Rewritten by:
- *    Gareth Hughes <gareth@valinux.com>
+ */
+
+/**
+ * \file mga_dma.c
+ * DMA support for MGA G200 / G400.
+ * 
+ * \author Rickard E. (Rik) Faith <faith@valinux.com>
+ * \author Jeff Hartmann <jhartmann@valinux.com>
+ * \author Keith Whitwell <keith@tungstengraphics.com>
+ * \author Gareth Hughes <gareth@valinux.com>
  */
 
 #include "drmP.h"
 #include "drm.h"
+#include "drm_sarea.h"
 #include "mga_drm.h"
 #include "mga_drv.h"
 
@@ -148,7 +151,7 @@
 	DRM_DEBUG( "  space = 0x%06x\n", primary->space );
 
 	mga_flush_write_combine();
-	MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER );
+	MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
 
 	DRM_DEBUG( "done.\n" );
 }
@@ -190,7 +193,7 @@
 	DRM_DEBUG( "  space = 0x%06x\n", primary->space );
 
 	mga_flush_write_combine();
-	MGA_WRITE( MGA_PRIMEND, tail | MGA_PAGPXFER );
+	MGA_WRITE(MGA_PRIMEND, tail | dev_priv->dma_access);
 
 	set_bit( 0, &primary->wrapped );
 	DRM_DEBUG( "done.\n" );
@@ -396,23 +399,383 @@
  * DMA initialization, cleanup
  */
 
+
+int mga_driver_preinit(drm_device_t *dev, unsigned long flags)
+{
+	drm_mga_private_t * dev_priv;
+
+	dev_priv = drm_alloc(sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+	if (!dev_priv)
+		return DRM_ERR(ENOMEM);
+
+	dev->dev_private = (void *)dev_priv;
+	memset(dev_priv, 0, sizeof(drm_mga_private_t));
+
+	dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
+	dev_priv->chipset = flags;
+
+	return 0;
+}
+
+/**
+ * Bootstrap the driver for AGP DMA.
+ * 
+ * \todo
+ * Investigate whether there is any benifit to storing the WARP microcode in
+ * AGP memory.  If not, the microcode may as well always be put in PCI
+ * memory.
+ *
+ * \todo
+ * This routine needs to set dma_bs->agp_mode to the mode actually configured
+ * in the hardware.  Looking just at the Linux AGP driver code, I don't see
+ * an easy way to determine this.
+ *
+ * \sa mga_do_dma_bootstrap, mga_do_pci_dma_bootstrap
+ */
+static int mga_do_agp_dma_bootstrap(drm_device_t * dev,
+				    drm_mga_dma_bootstrap_t * dma_bs)
+{
+	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
+	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	int err;
+	unsigned  offset;
+	const unsigned secondary_size = dma_bs->secondary_bin_count
+		* dma_bs->secondary_bin_size;
+	const unsigned agp_size = (dma_bs->agp_size << 20);
+	drm_buf_desc_t req;
+	drm_agp_mode_t mode;
+	drm_agp_info_t info;
+
+	
+	/* Acquire AGP. */
+	err = drm_agp_acquire(dev);
+	if (err) {
+		DRM_ERROR("Unable to acquire AGP\n");
+		return err;
+	}
+
+	err = drm_agp_info(dev, &info);
+	if (err) {
+		DRM_ERROR("Unable to get AGP info\n");
+		return err;
+	}
+
+	mode.mode = (info.mode & ~0x07) | dma_bs->agp_mode;
+	err = drm_agp_enable(dev, mode);
+	if (err) {
+		DRM_ERROR("Unable to enable AGP (mode = 0x%lx)\n", mode.mode);
+		return err;
+	}
+
+
+	/* In addition to the usual AGP mode configuration, the G200 AGP cards
+	 * need to have the AGP mode "manually" set.
+	 */
+
+	if (dev_priv->chipset == MGA_CARD_TYPE_G200) {
+		if (mode.mode & 0x02) {
+			MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_ENABLE);
+		}
+		else {
+			MGA_WRITE(MGA_AGP_PLL, MGA_AGP2XPLL_DISABLE);
+		}
+	}
+
+
+	/* Allocate and bind AGP memory. */
+	dev_priv->agp_pages = agp_size / PAGE_SIZE;
+	dev_priv->agp_mem = drm_alloc_agp( dev, dev_priv->agp_pages, 0 );
+	if (dev_priv->agp_mem == NULL) {
+		dev_priv->agp_pages = 0;
+		DRM_ERROR("Unable to allocate %uMB AGP memory\n",
+			  dma_bs->agp_size);
+		return DRM_ERR(ENOMEM);
+	}
+		
+	err = drm_bind_agp( dev_priv->agp_mem, 0 );
+	if (err) {
+		DRM_ERROR("Unable to bind AGP memory\n");
+		return err;
+	}
+
+	offset = 0;
+	err = drm_addmap( dev, offset, warp_size,
+			  _DRM_AGP, _DRM_READ_ONLY, & dev_priv->warp );
+	if (err) {
+		DRM_ERROR("Unable to map WARP microcode\n");
+		return err;
+	}
+
+	offset += warp_size;
+	err = drm_addmap( dev, offset, dma_bs->primary_size,
+			  _DRM_AGP, _DRM_READ_ONLY, & dev_priv->primary );
+	if (err) {
+		DRM_ERROR("Unable to map primary DMA region\n");
+		return err;
+	}
+
+	offset += dma_bs->primary_size;
+	err = drm_addmap( dev, offset, secondary_size,
+			  _DRM_AGP, 0, & dev->agp_buffer_map );
+	if (err) {
+		DRM_ERROR("Unable to map secondary DMA region\n");
+		return err;
+	}
+
+	(void) memset( &req, 0, sizeof(req) );
+	req.count = dma_bs->secondary_bin_count;
+	req.size = dma_bs->secondary_bin_size;
+	req.flags = _DRM_AGP_BUFFER;
+	req.agp_start = offset;
+
+	err = drm_addbufs_agp( dev, & req );
+	if (err) {
+		DRM_ERROR("Unable to add secondary DMA buffers\n");
+		return err;
+	}
+
+	offset += secondary_size;
+	err = drm_addmap( dev, offset, agp_size - offset,
+			  _DRM_AGP, 0, & dev_priv->agp_textures );
+	if (err) {
+		DRM_ERROR("Unable to map AGP texture region\n");
+		return err;
+	}
+
+	drm_core_ioremap(dev_priv->warp, dev);
+	drm_core_ioremap(dev_priv->primary, dev);
+	drm_core_ioremap(dev->agp_buffer_map, dev);
+
+	if (!dev_priv->warp->handle ||
+	    !dev_priv->primary->handle || !dev->agp_buffer_map->handle) {
+		DRM_ERROR("failed to ioremap agp regions! (%p, %p, %p)\n",
+			  dev_priv->warp->handle, dev_priv->primary->handle,
+			  dev->agp_buffer_map->handle);
+		return DRM_ERR(ENOMEM);
+	}
+
+	dev_priv->dma_access = MGA_PAGPXFER;
+	dev_priv->wagp_enable = MGA_WAGP_ENABLE;
+
+	DRM_INFO("Initialized card for AGP DMA.\n");
+	return 0;
+}
+
+/**
+ * Bootstrap the driver for PCI DMA.
+ * 
+ * \todo
+ * The algorithm for decreasing the size of the primary DMA buffer could be
+ * better.  The size should be rounded up to the nearest page size, then
+ * decrease the request size by a single page each pass through the loop.
+ *
+ * \todo
+ * Determine whether the maximum address passed to drm_pci_alloc is correct.
+ * The same goes for drm_addbufs_pci.
+ * 
+ * \sa mga_do_dma_bootstrap, mga_do_agp_dma_bootstrap
+ */
+static int mga_do_pci_dma_bootstrap(drm_device_t * dev,
+				    drm_mga_dma_bootstrap_t * dma_bs)
+{
+	drm_mga_private_t * const dev_priv = (drm_mga_private_t *) dev->dev_private;
+	const unsigned int warp_size = mga_warp_microcode_size(dev_priv);
+	unsigned int primary_size;
+	unsigned int bin_count;
+	int err;
+	drm_buf_desc_t req;
+
+	
+	if (dev->dma == NULL) {
+		DRM_ERROR("dev->dma is NULL\n");
+		return DRM_ERR(EFAULT);
+	}
+
+	/* The proper alignment is 0x100 for this mapping */
+	err = drm_addmap(dev, 0, warp_size, _DRM_CONSISTENT,
+			 _DRM_READ_ONLY, &dev_priv->warp);
+	if (err != 0) {
+		DRM_ERROR("Unable to create mapping for WARP microcode\n");
+		return err;
+	}
+
+	/* Other than the bottom two bits being used to encode other
+	 * information, there don't appear to be any restrictions on the
+	 * alignment of the primary or secondary DMA buffers.
+	 */
+
+	for ( primary_size = dma_bs->primary_size
+	      ; primary_size != 0
+	      ; primary_size >>= 1 ) {
+		/* The proper alignment for this mapping is 0x04 */
+		err = drm_addmap(dev, 0, primary_size, _DRM_CONSISTENT,
+				 _DRM_READ_ONLY, &dev_priv->primary);
+		if (!err)
+			break;
+	}
+
+	if (err != 0) {
+		DRM_ERROR("Unable to allocate primary DMA region\n");
+		return DRM_ERR(ENOMEM);
+	}
+
+	if (dev_priv->primary->size != dma_bs->primary_size) {
+		DRM_INFO("Primary DMA buffer size reduced from %u to %u.\n",
+			 dma_bs->primary_size, 
+			 (unsigned) dev_priv->primary->size);
+		dma_bs->primary_size = dev_priv->primary->size;
+	}
+
+	for ( bin_count = dma_bs->secondary_bin_count
+	      ; bin_count > 0 
+	      ; bin_count-- ) {
+		(void) memset( &req, 0, sizeof(req) );
+		req.count = bin_count;
+		req.size = dma_bs->secondary_bin_size;
+
+		err = drm_addbufs_pci( dev, & req );
+		if (!err) {
+			break;
+		}
+	}
+	
+	if (bin_count == 0) {
+		DRM_ERROR("Unable to add secondary DMA buffers\n");
+		return err;
+	}
+
+	if (bin_count != dma_bs->secondary_bin_count) {
+		DRM_INFO("Secondary PCI DMA buffer bin count reduced from %u "
+			 "to %u.\n", dma_bs->secondary_bin_count, bin_count);
+
+		dma_bs->secondary_bin_count = bin_count;
+	}
+
+	dev_priv->dma_access = 0;
+	dev_priv->wagp_enable = 0;
+
+	dma_bs->agp_mode = 0;
+
+	DRM_INFO("Initialized card for PCI DMA.\n");
+	return 0;
+}
+
+
+static int mga_do_dma_bootstrap(drm_device_t * dev,
+				drm_mga_dma_bootstrap_t * dma_bs)
+{
+	const int is_agp = (dma_bs->agp_mode != 0) && drm_device_is_agp(dev);
+	int err;
+	drm_mga_private_t * const dev_priv =
+		(drm_mga_private_t *) dev->dev_private;
+
+
+	dev_priv->used_new_dma_init = 1;
+
+	/* The first steps are the same for both PCI and AGP based DMA.  Map
+	 * the cards MMIO registers and map a status page.
+	 */
+	err = drm_addmap( dev, dev_priv->mmio_base, dev_priv->mmio_size,
+			  _DRM_REGISTERS, _DRM_READ_ONLY, & dev_priv->mmio );
+	if (err) {
+		DRM_ERROR("Unable to map MMIO region\n");
+		return err;
+	}
+
+
+	err = drm_addmap( dev, 0, SAREA_MAX, _DRM_SHM,
+			  _DRM_READ_ONLY | _DRM_LOCKED | _DRM_KERNEL,
+			  & dev_priv->status );
+	if (err) {
+		DRM_ERROR("Unable to map status region\n");
+		return err;
+	}
+
+
+	/* The DMA initialization procedure is slightly different for PCI and
+	 * AGP cards.  AGP cards just allocate a large block of AGP memory and
+	 * carve off portions of it for internal uses.  The remaining memory
+	 * is returned to user-mode to be used for AGP textures.
+	 */
+
+	if (is_agp) {
+		err = mga_do_agp_dma_bootstrap(dev, dma_bs);
+	}
+	
+	/* If we attempted to initialize the card for AGP DMA but failed,
+	 * clean-up any mess that may have been created.
+	 */
+
+	if (err) {
+		mga_do_cleanup_dma(dev);
+	}
+
+
+	/* Not only do we want to try and initialized PCI cards for PCI DMA,
+	 * but we also try to initialized AGP cards that could not be
+	 * initialized for AGP DMA.  This covers the case where we have an AGP
+	 * card in a system with an unsupported AGP chipset.  In that case the
+	 * card will be detected as AGP, but we won't be able to allocate any
+	 * AGP memory, etc.
+	 */
+
+	if (!is_agp || err) {
+		err = mga_do_pci_dma_bootstrap(dev, dma_bs);
+	}
+
+
+	return err;
+}
+
+int mga_dma_bootstrap(DRM_IOCTL_ARGS)
+{
+	DRM_DEVICE;
+	drm_mga_dma_bootstrap_t bootstrap;
+	int err;
+
+
+	DRM_COPY_FROM_USER_IOCTL(bootstrap,
+				 (drm_mga_dma_bootstrap_t __user *) data,
+				 sizeof(bootstrap));
+
+	err = mga_do_dma_bootstrap(dev, & bootstrap);
+	if (! err) {
+		static const int modes[] = { 0, 1, 2, 2, 4, 4, 4, 4 };
+		const drm_mga_private_t * const dev_priv = 
+			(drm_mga_private_t *) dev->dev_private;
+
+		if (dev_priv->agp_textures != NULL) {
+			bootstrap.texture_handle = dev_priv->agp_textures->offset;
+			bootstrap.texture_size = dev_priv->agp_textures->size;
+		}
+		else {
+			bootstrap.texture_handle = 0;
+			bootstrap.texture_size = 0;
+		}
+
+		bootstrap.agp_mode = modes[ bootstrap.agp_mode & 0x07 ];
+		if (DRM_COPY_TO_USER( (void __user *) data, & bootstrap,
+				     sizeof(bootstrap))) {
+			err = DRM_ERR(EFAULT);
+		}
+	}
+	else {
+		mga_do_cleanup_dma(dev);
+	}
+
+	return err;
+}
+
 static int mga_do_init_dma( drm_device_t *dev, drm_mga_init_t *init )
 {
 	drm_mga_private_t *dev_priv;
 	int ret;
 	DRM_DEBUG( "\n" );
 
-	dev_priv = drm_alloc( sizeof(drm_mga_private_t), DRM_MEM_DRIVER );
-	if ( !dev_priv )
-		return DRM_ERR(ENOMEM);
 
-	memset( dev_priv, 0, sizeof(drm_mga_private_t) );
+	dev_priv = dev->dev_private;
 
-	dev_priv->chipset = init->chipset;
-
-	dev_priv->usec_timeout = MGA_DEFAULT_USEC_TIMEOUT;
-
-	if ( init->sgram ) {
+	if (init->sgram) {
 		dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_BLK;
 	} else {
 		dev_priv->clear_cmd = MGA_DWGCTL_CLEAR | MGA_ATYPE_RSTR;
@@ -436,88 +799,65 @@
 
 	DRM_GETSAREA();
 
-	if(!dev_priv->sarea) {
-		DRM_ERROR( "failed to find sarea!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
+	if (!dev_priv->sarea) {
+		DRM_ERROR("failed to find sarea!\n");
 		return DRM_ERR(EINVAL);
 	}
 
-	dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
-	if(!dev_priv->mmio) {
-		DRM_ERROR( "failed to find mmio region!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
-		return DRM_ERR(EINVAL);
-	}
-	dev_priv->status = drm_core_findmap(dev, init->status_offset);
-	if(!dev_priv->status) {
-		DRM_ERROR( "failed to find status page!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
-		return DRM_ERR(EINVAL);
-	}
-	dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
-	if(!dev_priv->warp) {
-		DRM_ERROR( "failed to find warp microcode region!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
-		return DRM_ERR(EINVAL);
-	}
-	dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
-	if(!dev_priv->primary) {
-		DRM_ERROR( "failed to find primary dma region!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
-		return DRM_ERR(EINVAL);
-	}
-	dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
-	if(!dev->agp_buffer_map) {
-		DRM_ERROR( "failed to find dma buffer region!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
-		return DRM_ERR(EINVAL);
+	if (! dev_priv->used_new_dma_init) {
+		dev_priv->status = drm_core_findmap(dev, init->status_offset);
+		if (!dev_priv->status) {
+			DRM_ERROR("failed to find status page!\n");
+			return DRM_ERR(EINVAL);
+		}
+		dev_priv->mmio = drm_core_findmap(dev, init->mmio_offset);
+		if (!dev_priv->mmio) {
+			DRM_ERROR("failed to find mmio region!\n");
+			return DRM_ERR(EINVAL);
+		}
+		dev_priv->warp = drm_core_findmap(dev, init->warp_offset);
+		if (!dev_priv->warp) {
+			DRM_ERROR("failed to find warp microcode region!\n");
+			return DRM_ERR(EINVAL);
+		}
+		dev_priv->primary = drm_core_findmap(dev, init->primary_offset);
+		if (!dev_priv->primary) {
+			DRM_ERROR("failed to find primary dma region!\n");
+			return DRM_ERR(EINVAL);
+		}
+		dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset);
+		if (!dev->agp_buffer_map) {
+			DRM_ERROR("failed to find dma buffer region!\n");
+			return DRM_ERR(EINVAL);
+		}
+
+		drm_core_ioremap(dev_priv->warp, dev);
+		drm_core_ioremap(dev_priv->primary, dev);
+		drm_core_ioremap(dev->agp_buffer_map, dev);
 	}
 
 	dev_priv->sarea_priv =
 		(drm_mga_sarea_t *)((u8 *)dev_priv->sarea->handle +
 				    init->sarea_priv_offset);
 
-	drm_core_ioremap( dev_priv->warp, dev );
-	drm_core_ioremap( dev_priv->primary, dev );
-	drm_core_ioremap( dev->agp_buffer_map, dev );
-
-	if(!dev_priv->warp->handle ||
-	   !dev_priv->primary->handle ||
-	   !dev->agp_buffer_map->handle ) {
-		DRM_ERROR( "failed to ioremap agp regions!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
+	if (!dev_priv->warp->handle ||
+	    !dev_priv->primary->handle ||
+	    ((dev_priv->dma_access != 0) &&
+	     ((dev->agp_buffer_map == NULL) ||
+	      (dev->agp_buffer_map->handle == NULL)))) {
+		DRM_ERROR("failed to ioremap agp regions!\n");
 		return DRM_ERR(ENOMEM);
 	}
 
-	ret = mga_warp_install_microcode( dev_priv );
-	if ( ret < 0 ) {
-		DRM_ERROR( "failed to install WARP ucode!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
+	ret = mga_warp_install_microcode(dev_priv);
+	if (ret < 0) {
+		DRM_ERROR("failed to install WARP ucode!\n");
 		return ret;
 	}
 
-	ret = mga_warp_init( dev_priv );
-	if ( ret < 0 ) {
-		DRM_ERROR( "failed to init WARP engine!\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
+	ret = mga_warp_init(dev_priv);
+	if (ret < 0) {
+		DRM_ERROR("failed to init WARP engine!\n");
 		return ret;
 	}
 
@@ -557,22 +897,18 @@
 	dev_priv->sarea_priv->last_frame.head = 0;
 	dev_priv->sarea_priv->last_frame.wrap = 0;
 
-	if ( mga_freelist_init( dev, dev_priv ) < 0 ) {
-		DRM_ERROR( "could not initialize freelist\n" );
-		/* Assign dev_private so we can do cleanup. */
-		dev->dev_private = (void *)dev_priv;
-		mga_do_cleanup_dma( dev );
+	if (mga_freelist_init(dev, dev_priv) < 0) {
+		DRM_ERROR("could not initialize freelist\n");
 		return DRM_ERR(ENOMEM);
 	}
 
-	/* Make dev_private visable to others. */
-	dev->dev_private = (void *)dev_priv;
 	return 0;
 }
 
 static int mga_do_cleanup_dma( drm_device_t *dev )
 {
-	DRM_DEBUG( "\n" );
+	int err = 0;
+	DRM_DEBUG("\n");
 
 	/* Make sure interrupts are disabled here because the uninstall ioctl
 	 * may not have been called from userspace and after dev_private
@@ -583,20 +919,49 @@
 	if ( dev->dev_private ) {
 		drm_mga_private_t *dev_priv = dev->dev_private;
 
-		if ( dev_priv->warp != NULL )
-			drm_core_ioremapfree( dev_priv->warp, dev );
-		if ( dev_priv->primary != NULL )
-			drm_core_ioremapfree( dev_priv->primary, dev );
-		if ( dev->agp_buffer_map != NULL )
-			drm_core_ioremapfree( dev->agp_buffer_map, dev );
+		if ((dev_priv->warp != NULL) 
+		    && (dev_priv->mmio->type != _DRM_CONSISTENT))
+			drm_core_ioremapfree(dev_priv->warp, dev);
 
-		if ( dev_priv->head != NULL ) {
-			mga_freelist_cleanup( dev );
+		if ((dev_priv->primary != NULL) 
+		    && (dev_priv->primary->type != _DRM_CONSISTENT))
+			drm_core_ioremapfree(dev_priv->primary, dev);
+
+		if (dev->agp_buffer_map != NULL)
+			drm_core_ioremapfree(dev->agp_buffer_map, dev);
+
+		if (dev_priv->used_new_dma_init) {
+			if (dev_priv->agp_mem != NULL) {
+				dev_priv->agp_textures = NULL;
+				drm_unbind_agp(dev_priv->agp_mem);
+
+				drm_free_agp(dev_priv->agp_mem, dev_priv->agp_pages);
+				dev_priv->agp_pages = 0;
+				dev_priv->agp_mem = NULL;
+			}
+
+			if ((dev->agp != NULL) && dev->agp->acquired) {
+				err = drm_agp_release(dev);
+			}
+
+			dev_priv->used_new_dma_init = 0;
 		}
 
-		drm_free( dev->dev_private, sizeof(drm_mga_private_t),
-			   DRM_MEM_DRIVER );
-		dev->dev_private = NULL;
+		dev_priv->warp = NULL;
+		dev_priv->primary = NULL;
+		dev_priv->mmio = NULL;
+		dev_priv->status = NULL;
+		dev_priv->sarea = NULL;
+		dev_priv->sarea_priv = NULL;
+		dev->agp_buffer_map = NULL;
+
+		memset(&dev_priv->prim, 0, sizeof(dev_priv->prim));
+		dev_priv->warp_pipe = 0;
+		memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys));
+
+		if (dev_priv->head != NULL) {
+			mga_freelist_cleanup(dev);
+		}
 	}
 
 	return 0;
@@ -606,14 +971,20 @@
 {
 	DRM_DEVICE;
 	drm_mga_init_t init;
+	int err;
 
 	LOCK_TEST_WITH_RETURN( dev, filp );
 
-	DRM_COPY_FROM_USER_IOCTL( init, (drm_mga_init_t __user *)data, sizeof(init) );
+	DRM_COPY_FROM_USER_IOCTL(init, (drm_mga_init_t __user *) data,
+				 sizeof(init));
 
 	switch ( init.func ) {
 	case MGA_INIT_DMA:
-		return mga_do_init_dma( dev, &init );
+		err = mga_do_init_dma(dev, &init);
+		if (err) {
+			(void) mga_do_cleanup_dma(dev);
+		}
+		return err;
 	case MGA_CLEANUP_DMA:
 		return mga_do_cleanup_dma( dev );
 	}
@@ -742,7 +1113,21 @@
 	return ret;
 }
 
-void mga_driver_pretakedown(drm_device_t *dev)
+/**
+ * Called just before the module is unloaded.
+ */
+int mga_driver_postcleanup(drm_device_t * dev)
+{
+	drm_free(dev->dev_private, sizeof(drm_mga_private_t), DRM_MEM_DRIVER);
+	dev->dev_private = NULL;
+
+	return 0;
+}
+
+/**
+ * Called when the last opener of the device is closed.
+ */
+void mga_driver_pretakedown(drm_device_t * dev)
 {
 	mga_do_cleanup_dma( dev );
 }
diff --git a/drivers/char/drm/mga_drm.h b/drivers/char/drm/mga_drm.h
index 4500e6e..2d8aa79 100644
--- a/drivers/char/drm/mga_drm.h
+++ b/drivers/char/drm/mga_drm.h
@@ -226,10 +226,6 @@
 } drm_mga_sarea_t;
 
 
-/* WARNING: If you change any of these defines, make sure to change the
- * defines in the Xserver file (xf86drmMga.h)
- */
-
 /* MGA specific ioctls
  * The device specific ioctl range is 0x40 to 0x79.
  */
@@ -244,6 +240,14 @@
 #define DRM_MGA_BLIT     0x08
 #define DRM_MGA_GETPARAM 0x09
 
+/* 3.2:
+ * ioctls for operating on fences.
+ */
+#define DRM_MGA_SET_FENCE      0x0a
+#define DRM_MGA_WAIT_FENCE     0x0b
+#define DRM_MGA_DMA_BOOTSTRAP  0x0c
+
+
 #define DRM_IOCTL_MGA_INIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_INIT, drm_mga_init_t)
 #define DRM_IOCTL_MGA_FLUSH    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_FLUSH, drm_lock_t)
 #define DRM_IOCTL_MGA_RESET    DRM_IO(  DRM_COMMAND_BASE + DRM_MGA_RESET)
@@ -254,6 +258,9 @@
 #define DRM_IOCTL_MGA_ILOAD    DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_ILOAD, drm_mga_iload_t)
 #define DRM_IOCTL_MGA_BLIT     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_BLIT, drm_mga_blit_t)
 #define DRM_IOCTL_MGA_GETPARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_GETPARAM, drm_mga_getparam_t)
+#define DRM_IOCTL_MGA_SET_FENCE     DRM_IOW( DRM_COMMAND_BASE + DRM_MGA_SET_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_WAIT_FENCE    DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_WAIT_FENCE, uint32_t)
+#define DRM_IOCTL_MGA_DMA_BOOTSTRAP DRM_IOWR(DRM_COMMAND_BASE + DRM_MGA_DMA_BOOTSTRAP, drm_mga_dma_bootstrap_t)
 
 typedef struct _drm_mga_warp_index {
    	int installed;
@@ -292,12 +299,72 @@
 	unsigned long buffers_offset;
 } drm_mga_init_t;
 
-typedef struct drm_mga_fullscreen {
-	enum {
-		MGA_INIT_FULLSCREEN    = 0x01,
-		MGA_CLEANUP_FULLSCREEN = 0x02
-	} func;
-} drm_mga_fullscreen_t;
+typedef struct drm_mga_dma_bootstrap {
+	/**
+	 * \name AGP texture region
+	 * 
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, these fields will
+	 * be filled in with the actual AGP texture settings.
+	 * 
+	 * \warning
+	 * If these fields are non-zero, but dma_mga_dma_bootstrap::agp_mode
+	 * is zero, it means that PCI memory (most likely through the use of
+	 * an IOMMU) is being used for "AGP" textures.
+	 */
+	/*@{*/
+	drm_handle_t texture_handle;  /**< Handle used to map AGP textures. */
+	uint32_t     texture_size;    /**< Size of the AGP texture region. */
+	/*@}*/
+
+
+	/**
+	 * Requested size of the primary DMA region.
+	 * 
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 */
+	uint32_t primary_size;
+
+
+	/**
+	 * Requested number of secondary DMA buffers.
+	 * 
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual number of secondary DMA buffers
+	 * allocated.  Particularly when PCI DMA is used, this may be
+	 * (subtantially) less than the number requested.
+	 */
+	uint32_t secondary_bin_count;
+	
+	
+	/**
+	 * Requested size of each secondary DMA buffer.
+	 * 
+	 * While the kernel \b is free to reduce
+	 * dma_mga_dma_bootstrap::secondary_bin_count, it is \b not allowed
+	 * to reduce dma_mga_dma_bootstrap::secondary_bin_size.
+	 */
+	uint32_t secondary_bin_size;
+
+
+	/**
+	 * Bit-wise mask of AGPSTAT2_* values.  Currently only \c AGPSTAT2_1X,
+	 * \c AGPSTAT2_2X, and \c AGPSTAT2_4X are supported.  If this value is
+	 * zero, it means that PCI DMA should be used, even if AGP is
+	 * possible.
+	 * 
+	 * On return from the DRM_MGA_DMA_BOOTSTRAP ioctl, this field will be
+	 * filled in with the actual AGP mode.  If AGP was not available
+	 * (i.e., PCI DMA was used), this value will be zero.
+	 */
+	uint32_t agp_mode;
+
+
+	/**
+	 * Desired AGP GART size, measured in megabytes.
+	 */
+	uint8_t agp_size;
+} drm_mga_dma_bootstrap_t;
 
 typedef struct drm_mga_clear {
 	unsigned int flags;
@@ -342,6 +409,14 @@
  */
 #define MGA_PARAM_IRQ_NR            1
 
+/* 3.2: Query the actual card type.  The DDX only distinguishes between
+ * G200 chips and non-G200 chips, which it calls G400.  It turns out that
+ * there are some very sublte differences between the G4x0 chips and the G550
+ * chips.  Using this parameter query, a client-side driver can detect the
+ * difference between a G4x0 and a G550.
+ */
+#define MGA_PARAM_CARD_TYPE         2
+
 typedef struct drm_mga_getparam {
 	int param;
 	void __user *value;
diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h
index 38f9139..b22fdbd 100644
--- a/drivers/char/drm/mga_drv.h
+++ b/drivers/char/drm/mga_drv.h
@@ -38,11 +38,11 @@
 
 #define DRIVER_NAME		"mga"
 #define DRIVER_DESC		"Matrox G200/G400"
-#define DRIVER_DATE		"20051013"
+#define DRIVER_DATE		"20050607"
 
 #define DRIVER_MAJOR		3
-#define DRIVER_MINOR		1
-#define DRIVER_PATCHLEVEL	1
+#define DRIVER_MINOR		2
+#define DRIVER_PATCHLEVEL	0
 
 typedef struct drm_mga_primary_buffer {
 	u8 *start;
@@ -87,9 +87,43 @@
 	int chipset;
 	int usec_timeout;
 
+	/**
+	 * If set, the new DMA initialization sequence was used.  This is
+	 * primarilly used to select how the driver should uninitialized its
+	 * internal DMA structures.
+	 */
+	int used_new_dma_init;
+
+	/**
+	 * If AGP memory is used for DMA buffers, this will be the value
+	 * \c MGA_PAGPXFER.  Otherwise, it will be zero (for a PCI transfer).
+	 */
+	u32 dma_access;
+
+	/**
+	 * If AGP memory is used for DMA buffers, this will be the value
+	 * \c MGA_WAGP_ENABLE.  Otherwise, it will be zero (for a PCI
+	 * transfer).
+	 */
+	u32 wagp_enable;
+
+	/**
+	 * \name MMIO region parameters.
+	 * 
+	 * \sa drm_mga_private_t::mmio
+	 */
+	/*@{*/
+	u32 mmio_base;             /**< Bus address of base of MMIO. */
+	u32 mmio_size;             /**< Size of the MMIO region. */
+	/*@}*/
+
 	u32 clear_cmd;
 	u32 maccess;
 
+	wait_queue_head_t fence_queue;
+	atomic_t last_fence_retired;
+	u32 next_fence_to_post;
+
 	unsigned int fb_cpp;
 	unsigned int front_offset;
 	unsigned int front_pitch;
@@ -108,35 +142,43 @@
 	drm_local_map_t *status;
 	drm_local_map_t *warp;
 	drm_local_map_t *primary;
-	drm_local_map_t *buffers;
 	drm_local_map_t *agp_textures;
+	
+	DRM_AGP_MEM *agp_mem;
+	unsigned int agp_pages;
 } drm_mga_private_t;
 
 				/* mga_dma.c */
-extern int mga_dma_init( DRM_IOCTL_ARGS );
-extern int mga_dma_flush( DRM_IOCTL_ARGS );
-extern int mga_dma_reset( DRM_IOCTL_ARGS );
-extern int mga_dma_buffers( DRM_IOCTL_ARGS );
-extern void mga_driver_pretakedown(drm_device_t *dev);
-extern int mga_driver_dma_quiescent(drm_device_t *dev);
+extern int mga_driver_preinit(drm_device_t * dev, unsigned long flags);
+extern int mga_dma_bootstrap(DRM_IOCTL_ARGS);
+extern int mga_dma_init(DRM_IOCTL_ARGS);
+extern int mga_dma_flush(DRM_IOCTL_ARGS);
+extern int mga_dma_reset(DRM_IOCTL_ARGS);
+extern int mga_dma_buffers(DRM_IOCTL_ARGS);
+extern int mga_driver_postcleanup(drm_device_t * dev);
+extern void mga_driver_pretakedown(drm_device_t * dev);
+extern int mga_driver_dma_quiescent(drm_device_t * dev);
 
-extern int mga_do_wait_for_idle( drm_mga_private_t *dev_priv );
+extern int mga_do_wait_for_idle(drm_mga_private_t * dev_priv);
 
-extern void mga_do_dma_flush( drm_mga_private_t *dev_priv );
-extern void mga_do_dma_wrap_start( drm_mga_private_t *dev_priv );
-extern void mga_do_dma_wrap_end( drm_mga_private_t *dev_priv );
+extern void mga_do_dma_flush(drm_mga_private_t * dev_priv);
+extern void mga_do_dma_wrap_start(drm_mga_private_t * dev_priv);
+extern void mga_do_dma_wrap_end(drm_mga_private_t * dev_priv);
 
 extern int mga_freelist_put( drm_device_t *dev, drm_buf_t *buf );
 
 				/* mga_warp.c */
-extern int mga_warp_install_microcode( drm_mga_private_t *dev_priv );
-extern int mga_warp_init( drm_mga_private_t *dev_priv );
+extern unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv);
+extern int mga_warp_install_microcode(drm_mga_private_t * dev_priv);
+extern int mga_warp_init(drm_mga_private_t * dev_priv);
 
-extern int mga_driver_vblank_wait(drm_device_t *dev, unsigned int *sequence);
-extern irqreturn_t mga_driver_irq_handler( DRM_IRQ_ARGS );
-extern void mga_driver_irq_preinstall( drm_device_t *dev );
-extern void mga_driver_irq_postinstall( drm_device_t *dev );
-extern void mga_driver_irq_uninstall( drm_device_t *dev );
+				/* mga_irq.c */
+extern int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence);
+extern int mga_driver_vblank_wait(drm_device_t * dev, unsigned int *sequence);
+extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS);
+extern void mga_driver_irq_preinstall(drm_device_t * dev);
+extern void mga_driver_irq_postinstall(drm_device_t * dev);
+extern void mga_driver_irq_uninstall(drm_device_t * dev);
 extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
 			     unsigned long arg);
 
@@ -527,6 +569,12 @@
  */
 #define MGA_EXEC 			0x0100
 
+/* AGP PLL encoding (for G200 only).
+ */
+#define MGA_AGP_PLL 			0x1e4c
+#	define MGA_AGP2XPLL_DISABLE		(0 << 0)
+#	define MGA_AGP2XPLL_ENABLE		(1 << 0)
+
 /* Warp registers
  */
 #define MGA_WR0				0x2d00
diff --git a/drivers/char/drm/mga_irq.c b/drivers/char/drm/mga_irq.c
index bc0b6b5..52eaa4e 100644
--- a/drivers/char/drm/mga_irq.c
+++ b/drivers/char/drm/mga_irq.c
@@ -41,15 +41,40 @@
 	drm_mga_private_t *dev_priv = 
 	   (drm_mga_private_t *)dev->dev_private;
 	int status;
+	int handled = 0;
 
-	status = MGA_READ( MGA_STATUS );
-	
+	status = MGA_READ(MGA_STATUS);
+
 	/* VBLANK interrupt */
 	if ( status & MGA_VLINEPEN ) {
 		MGA_WRITE( MGA_ICLEAR, MGA_VLINEICLR );
 		atomic_inc(&dev->vbl_received);
 		DRM_WAKEUP(&dev->vbl_queue);
-		drm_vbl_send_signals( dev );
+		drm_vbl_send_signals(dev);
+		handled = 1;
+	}
+
+	/* SOFTRAP interrupt */
+	if (status & MGA_SOFTRAPEN) {
+		const u32 prim_start = MGA_READ(MGA_PRIMADDRESS);
+		const u32 prim_end   = MGA_READ(MGA_PRIMEND);
+
+
+		MGA_WRITE(MGA_ICLEAR, MGA_SOFTRAPICLR);
+
+		/* In addition to clearing the interrupt-pending bit, we
+		 * have to write to MGA_PRIMEND to re-start the DMA operation.
+		 */
+		if ( (prim_start & ~0x03) != (prim_end & ~0x03) ) {
+			MGA_WRITE(MGA_PRIMEND, prim_end);
+		}
+
+		atomic_inc(&dev_priv->last_fence_retired);
+		DRM_WAKEUP(&dev_priv->fence_queue);
+		handled = 1;
+	}
+
+	if ( handled ) {
 		return IRQ_HANDLED;
 	}
 	return IRQ_NONE;
@@ -73,9 +98,28 @@
 	return ret;
 }
 
-void mga_driver_irq_preinstall( drm_device_t *dev ) {
-  	drm_mga_private_t *dev_priv = 
-	   (drm_mga_private_t *)dev->dev_private;
+int mga_driver_fence_wait(drm_device_t * dev, unsigned int *sequence)
+{
+	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
+	unsigned int cur_fence;
+	int ret = 0;
+
+	/* Assume that the user has missed the current sequence number
+	 * by about a day rather than she wants to wait for years
+	 * using fences.
+	 */
+	DRM_WAIT_ON(ret, dev_priv->fence_queue, 3 * DRM_HZ,
+		    (((cur_fence = atomic_read(&dev_priv->last_fence_retired))
+		      - *sequence) <= (1 << 23)));
+
+	*sequence = cur_fence;
+
+	return ret;
+}
+
+void mga_driver_irq_preinstall(drm_device_t * dev)
+{
+	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
 
 	/* Disable *all* interrupts */
       	MGA_WRITE( MGA_IEN, 0 );
@@ -83,12 +127,14 @@
    	MGA_WRITE( MGA_ICLEAR, ~0 );
 }
 
-void mga_driver_irq_postinstall( drm_device_t *dev ) {
-  	drm_mga_private_t *dev_priv = 
-	   (drm_mga_private_t *)dev->dev_private;
+void mga_driver_irq_postinstall(drm_device_t * dev)
+{
+	drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
 
-	/* Turn on VBL interrupt */
-   	MGA_WRITE( MGA_IEN, MGA_VLINEIEN );
+	DRM_INIT_WAITQUEUE( &dev_priv->fence_queue );
+
+	/* Turn on vertical blank interrupt and soft trap interrupt. */
+	MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
 }
 
 void mga_driver_irq_uninstall( drm_device_t *dev ) {
@@ -98,5 +144,7 @@
 		return;
 
 	/* Disable *all* interrupts */
-	MGA_WRITE( MGA_IEN, 0 );
+	MGA_WRITE(MGA_IEN, 0);
+	
+	dev->irq_enabled = 0;
 }
diff --git a/drivers/char/drm/mga_state.c b/drivers/char/drm/mga_state.c
index 3c7a8f5..05bbb47 100644
--- a/drivers/char/drm/mga_state.c
+++ b/drivers/char/drm/mga_state.c
@@ -53,16 +53,16 @@
 
 	/* Force reset of DWGCTL on G400 (eliminates clip disable bit).
 	 */
-	if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {
-		DMA_BLOCK( MGA_DWGCTL,		ctx->dwgctl,
-			   MGA_LEN + MGA_EXEC,	0x80000000,
-			   MGA_DWGCTL,		ctx->dwgctl,
-			   MGA_LEN + MGA_EXEC,	0x80000000 );
+	if (dev_priv->chipset == MGA_CARD_TYPE_G400) {
+		DMA_BLOCK(MGA_DWGCTL, ctx->dwgctl,
+			  MGA_LEN + MGA_EXEC, 0x80000000,
+			  MGA_DWGCTL, ctx->dwgctl,
+			  MGA_LEN + MGA_EXEC, 0x80000000);
 	}
-	DMA_BLOCK( MGA_DMAPAD,	0x00000000,
-		   MGA_CXBNDRY,	(box->x2 << 16) | box->x1,
-		   MGA_YTOP,	box->y1 * pitch,
-		   MGA_YBOT,	box->y2 * pitch );
+	DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+		  MGA_CXBNDRY, ((box->x2 - 1) << 16) | box->x1,
+		  MGA_YTOP, box->y1 * pitch,
+		  MGA_YBOT, (box->y2 - 1) * pitch);
 
 	ADVANCE_DMA();
 }
@@ -260,12 +260,11 @@
 
 	/* Padding required to to hardware bug.
 	 */
-	DMA_BLOCK( MGA_DMAPAD,	0xffffffff,
-		   MGA_DMAPAD,	0xffffffff,
-		   MGA_DMAPAD,	0xffffffff,
-		   MGA_WIADDR,	(dev_priv->warp_pipe_phys[pipe] |
-				 MGA_WMODE_START |
-				 MGA_WAGP_ENABLE) );
+	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
+		  MGA_DMAPAD, 0xffffffff,
+		  MGA_DMAPAD, 0xffffffff,
+		  MGA_WIADDR, (dev_priv->warp_pipe_phys[pipe] |
+			       MGA_WMODE_START | dev_priv->wagp_enable));
 
 	ADVANCE_DMA();
 }
@@ -342,12 +341,11 @@
 		   MGA_WR60,	MGA_G400_WR_MAGIC );	/* tex1 height       */
 
 	/* Padding required to to hardware bug */
-	DMA_BLOCK( MGA_DMAPAD,	0xffffffff,
-		   MGA_DMAPAD,	0xffffffff,
-		   MGA_DMAPAD,	0xffffffff,
-		   MGA_WIADDR2,	(dev_priv->warp_pipe_phys[pipe] |
-				 MGA_WMODE_START |
-				 MGA_WAGP_ENABLE) );
+	DMA_BLOCK(MGA_DMAPAD, 0xffffffff,
+		  MGA_DMAPAD, 0xffffffff,
+		  MGA_DMAPAD, 0xffffffff,
+		  MGA_WIADDR2, (dev_priv->warp_pipe_phys[pipe] |
+				MGA_WMODE_START | dev_priv->wagp_enable));
 
 	ADVANCE_DMA();
 }
@@ -459,9 +457,9 @@
 	if ( dirty & MGA_UPLOAD_TEX0 )
 		ret |= mga_verify_tex( dev_priv, 0 );
 
-	if ( dev_priv->chipset == MGA_CARD_TYPE_G400 ) {
-		if ( dirty & MGA_UPLOAD_TEX1 )
-			ret |= mga_verify_tex( dev_priv, 1 );
+	if (dev_priv->chipset >= MGA_CARD_TYPE_G400) {
+		if (dirty & MGA_UPLOAD_TEX1)
+			ret |= mga_verify_tex(dev_priv, 1);
 
 		if ( dirty & MGA_UPLOAD_PIPE )
 			ret |= ( sarea_priv->warp_pipe > MGA_MAX_G400_PIPES );
@@ -686,12 +684,12 @@
 
 			BEGIN_DMA( 1 );
 
-			DMA_BLOCK( MGA_DMAPAD,		0x00000000,
-				   MGA_DMAPAD,		0x00000000,
-				   MGA_SECADDRESS,	(address |
-							 MGA_DMA_VERTEX),
-				   MGA_SECEND,		((address + length) |
-							 MGA_PAGPXFER) );
+			DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+				  MGA_DMAPAD, 0x00000000,
+				  MGA_SECADDRESS, (address |
+						   MGA_DMA_VERTEX),
+				  MGA_SECEND, ((address + length) |
+					       dev_priv->dma_access));
 
 			ADVANCE_DMA();
 		} while ( ++i < sarea_priv->nbox );
@@ -733,11 +731,11 @@
 
 			BEGIN_DMA( 1 );
 
-			DMA_BLOCK( MGA_DMAPAD,		0x00000000,
-				   MGA_DMAPAD,		0x00000000,
-				   MGA_SETUPADDRESS,	address + start,
-				   MGA_SETUPEND,	((address + end) |
-							 MGA_PAGPXFER) );
+			DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+				  MGA_DMAPAD, 0x00000000,
+				  MGA_SETUPADDRESS, address + start,
+				  MGA_SETUPEND, ((address + end) |
+						 dev_priv->dma_access));
 
 			ADVANCE_DMA();
 		} while ( ++i < sarea_priv->nbox );
@@ -764,7 +762,7 @@
 	drm_mga_private_t *dev_priv = dev->dev_private;
 	drm_mga_buf_priv_t *buf_priv = buf->dev_private;
 	drm_mga_context_regs_t *ctx = &dev_priv->sarea_priv->context_state;
-	u32 srcorg = buf->bus_address | MGA_SRCACC_AGP | MGA_SRCMAP_SYSMEM;
+	u32 srcorg = buf->bus_address | dev_priv->dma_access | MGA_SRCMAP_SYSMEM;
 	u32 y2;
 	DMA_LOCALS;
 	DRM_DEBUG( "buf=%d used=%d\n", buf->idx, buf->used );
@@ -1095,6 +1093,9 @@
 	case MGA_PARAM_IRQ_NR:
 		value = dev->irq;
 		break;
+	case MGA_PARAM_CARD_TYPE:
+		value = dev_priv->chipset;
+		break;
 	default:
 		return DRM_ERR(EINVAL);
 	}
@@ -1107,17 +1108,82 @@
 	return 0;
 }
 
+static int mga_set_fence(DRM_IOCTL_ARGS)
+{
+	DRM_DEVICE;
+	drm_mga_private_t *dev_priv = dev->dev_private;
+	u32 temp;
+	DMA_LOCALS;
+
+	if (!dev_priv) {
+		DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+		return DRM_ERR(EINVAL);
+	}
+
+	DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
+
+	/* I would normal do this assignment in the declaration of temp,
+	 * but dev_priv may be NULL.
+	 */
+
+	temp = dev_priv->next_fence_to_post;
+	dev_priv->next_fence_to_post++;
+
+	BEGIN_DMA(1);
+	DMA_BLOCK(MGA_DMAPAD, 0x00000000,
+		  MGA_DMAPAD, 0x00000000,
+		  MGA_DMAPAD, 0x00000000,
+		  MGA_SOFTRAP, 0x00000000);
+	ADVANCE_DMA();
+
+	if (DRM_COPY_TO_USER( (u32 __user *) data, & temp, sizeof(u32))) {
+		DRM_ERROR("copy_to_user\n");
+		return DRM_ERR(EFAULT);
+	}
+
+	return 0;
+}
+
+static int mga_wait_fence(DRM_IOCTL_ARGS)
+{
+	DRM_DEVICE;
+	drm_mga_private_t *dev_priv = dev->dev_private;
+	u32 fence;
+
+	if (!dev_priv) {
+		DRM_ERROR("%s called with no initialization\n", __FUNCTION__);
+		return DRM_ERR(EINVAL);
+	}
+
+	DRM_COPY_FROM_USER_IOCTL(fence, (u32 __user *) data, sizeof(u32));
+
+	DRM_DEBUG("pid=%d\n", DRM_CURRENTPID);
+
+	mga_driver_fence_wait(dev, & fence);
+
+	if (DRM_COPY_TO_USER( (u32 __user *) data, & fence, sizeof(u32))) {
+		DRM_ERROR("copy_to_user\n");
+		return DRM_ERR(EFAULT);
+	}
+
+	return 0;
+}
+
 drm_ioctl_desc_t mga_ioctls[] = {
-	[DRM_IOCTL_NR(DRM_MGA_INIT)]    = { mga_dma_init,    1, 1 },
-	[DRM_IOCTL_NR(DRM_MGA_FLUSH)]   = { mga_dma_flush,   1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_RESET)]   = { mga_dma_reset,   1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_SWAP)]    = { mga_dma_swap,    1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_CLEAR)]   = { mga_dma_clear,   1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_VERTEX)]  = { mga_dma_vertex,  1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_INDICES)] = { mga_dma_indices, 1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_ILOAD)]   = { mga_dma_iload,   1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_BLIT)]    = { mga_dma_blit,    1, 0 },
-	[DRM_IOCTL_NR(DRM_MGA_GETPARAM)]= { mga_getparam,    1, 0 },
+	[DRM_IOCTL_NR(DRM_MGA_INIT)] = {mga_dma_init, 1, 1},
+	[DRM_IOCTL_NR(DRM_MGA_FLUSH)] = {mga_dma_flush, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_RESET)] = {mga_dma_reset, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_SWAP)] = {mga_dma_swap, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_CLEAR)] = {mga_dma_clear, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_VERTEX)] = {mga_dma_vertex, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_INDICES)] = {mga_dma_indices, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_ILOAD)] = {mga_dma_iload, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_BLIT)] = {mga_dma_blit, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_GETPARAM)] = {mga_getparam, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_SET_FENCE)] = {mga_set_fence, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_WAIT_FENCE)] = {mga_wait_fence, 1, 0},
+	[DRM_IOCTL_NR(DRM_MGA_DMA_BOOTSTRAP)] = {mga_dma_bootstrap, 1, 1},
+
 };
 
 int mga_max_ioctl = DRM_ARRAY_SIZE(mga_ioctls);
diff --git a/drivers/char/drm/mga_warp.c b/drivers/char/drm/mga_warp.c
index 0a3a0cc..55ccc8a 100644
--- a/drivers/char/drm/mga_warp.c
+++ b/drivers/char/drm/mga_warp.c
@@ -48,65 +48,52 @@
 	vcbase += WARP_UCODE_SIZE( which );				\
 } while (0)
 
+static const unsigned int mga_warp_g400_microcode_size =
+	       (WARP_UCODE_SIZE(warp_g400_tgz) +
+		WARP_UCODE_SIZE(warp_g400_tgza) +
+		WARP_UCODE_SIZE(warp_g400_tgzaf) +
+		WARP_UCODE_SIZE(warp_g400_tgzf) +
+		WARP_UCODE_SIZE(warp_g400_tgzs) +
+		WARP_UCODE_SIZE(warp_g400_tgzsa) +
+		WARP_UCODE_SIZE(warp_g400_tgzsaf) +
+		WARP_UCODE_SIZE(warp_g400_tgzsf) +
+		WARP_UCODE_SIZE(warp_g400_t2gz) +
+		WARP_UCODE_SIZE(warp_g400_t2gza) +
+		WARP_UCODE_SIZE(warp_g400_t2gzaf) +
+		WARP_UCODE_SIZE(warp_g400_t2gzf) +
+		WARP_UCODE_SIZE(warp_g400_t2gzs) +
+		WARP_UCODE_SIZE(warp_g400_t2gzsa) +
+		WARP_UCODE_SIZE(warp_g400_t2gzsaf) +
+		WARP_UCODE_SIZE(warp_g400_t2gzsf));
 
-static unsigned int mga_warp_g400_microcode_size( drm_mga_private_t *dev_priv )
+static const unsigned int mga_warp_g200_microcode_size =
+	       (WARP_UCODE_SIZE(warp_g200_tgz) +
+		WARP_UCODE_SIZE(warp_g200_tgza) +
+		WARP_UCODE_SIZE(warp_g200_tgzaf) +
+		WARP_UCODE_SIZE(warp_g200_tgzf) +
+		WARP_UCODE_SIZE(warp_g200_tgzs) +
+		WARP_UCODE_SIZE(warp_g200_tgzsa) +
+		WARP_UCODE_SIZE(warp_g200_tgzsaf) +
+		WARP_UCODE_SIZE(warp_g200_tgzsf));
+
+
+unsigned int mga_warp_microcode_size(const drm_mga_private_t * dev_priv)
 {
-	unsigned int size;
-
-	size = ( WARP_UCODE_SIZE( warp_g400_tgz ) +
-		 WARP_UCODE_SIZE( warp_g400_tgza ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzaf ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzf ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzs ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzsa ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzsaf ) +
-		 WARP_UCODE_SIZE( warp_g400_tgzsf ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gz ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gza ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzaf ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzf ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzs ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzsa ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzsaf ) +
-		 WARP_UCODE_SIZE( warp_g400_t2gzsf ) );
-
-	size = PAGE_ALIGN( size );
-
-	DRM_DEBUG( "G400 ucode size = %d bytes\n", size );
-	return size;
-}
-
-static unsigned int mga_warp_g200_microcode_size( drm_mga_private_t *dev_priv )
-{
-	unsigned int size;
-
-	size = ( WARP_UCODE_SIZE( warp_g200_tgz ) +
-		 WARP_UCODE_SIZE( warp_g200_tgza ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzaf ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzf ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzs ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzsa ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzsaf ) +
-		 WARP_UCODE_SIZE( warp_g200_tgzsf ) );
-
-	size = PAGE_ALIGN( size );
-
-	DRM_DEBUG( "G200 ucode size = %d bytes\n", size );
-	return size;
+	switch (dev_priv->chipset) {
+	case MGA_CARD_TYPE_G400:
+	case MGA_CARD_TYPE_G550:
+		return PAGE_ALIGN(mga_warp_g400_microcode_size);
+	case MGA_CARD_TYPE_G200:
+		return PAGE_ALIGN(mga_warp_g200_microcode_size);
+	default:
+		return 0;
+	}
 }
 
 static int mga_warp_install_g400_microcode( drm_mga_private_t *dev_priv )
 {
 	unsigned char *vcbase = dev_priv->warp->handle;
 	unsigned long pcbase = dev_priv->warp->offset;
-	unsigned int size;
-
-	size = mga_warp_g400_microcode_size( dev_priv );
-	if ( size > dev_priv->warp->size ) {
-		DRM_ERROR( "microcode too large! (%u > %lu)\n",
-			   size, dev_priv->warp->size );
-		return DRM_ERR(ENOMEM);
-	}
 
 	memset( dev_priv->warp_pipe_phys, 0,
 		sizeof(dev_priv->warp_pipe_phys) );
@@ -136,35 +123,36 @@
 {
 	unsigned char *vcbase = dev_priv->warp->handle;
 	unsigned long pcbase = dev_priv->warp->offset;
-	unsigned int size;
 
-	size = mga_warp_g200_microcode_size( dev_priv );
-	if ( size > dev_priv->warp->size ) {
-		DRM_ERROR( "microcode too large! (%u > %lu)\n",
-			   size, dev_priv->warp->size );
-		return DRM_ERR(ENOMEM);
-	}
+	memset(dev_priv->warp_pipe_phys, 0, sizeof(dev_priv->warp_pipe_phys));
 
-	memset( dev_priv->warp_pipe_phys, 0,
-		sizeof(dev_priv->warp_pipe_phys) );
-
-	WARP_UCODE_INSTALL( warp_g200_tgz,	MGA_WARP_TGZ );
-	WARP_UCODE_INSTALL( warp_g200_tgzf,	MGA_WARP_TGZF );
-	WARP_UCODE_INSTALL( warp_g200_tgza,	MGA_WARP_TGZA );
-	WARP_UCODE_INSTALL( warp_g200_tgzaf,	MGA_WARP_TGZAF );
-	WARP_UCODE_INSTALL( warp_g200_tgzs,	MGA_WARP_TGZS );
-	WARP_UCODE_INSTALL( warp_g200_tgzsf,	MGA_WARP_TGZSF );
-	WARP_UCODE_INSTALL( warp_g200_tgzsa,	MGA_WARP_TGZSA );
-	WARP_UCODE_INSTALL( warp_g200_tgzsaf,	MGA_WARP_TGZSAF );
+	WARP_UCODE_INSTALL(warp_g200_tgz, MGA_WARP_TGZ);
+	WARP_UCODE_INSTALL(warp_g200_tgzf, MGA_WARP_TGZF);
+	WARP_UCODE_INSTALL(warp_g200_tgza, MGA_WARP_TGZA);
+	WARP_UCODE_INSTALL(warp_g200_tgzaf, MGA_WARP_TGZAF);
+	WARP_UCODE_INSTALL(warp_g200_tgzs, MGA_WARP_TGZS);
+	WARP_UCODE_INSTALL(warp_g200_tgzsf, MGA_WARP_TGZSF);
+	WARP_UCODE_INSTALL(warp_g200_tgzsa, MGA_WARP_TGZSA);
+	WARP_UCODE_INSTALL(warp_g200_tgzsaf, MGA_WARP_TGZSAF);
 
 	return 0;
 }
 
 int mga_warp_install_microcode(	drm_mga_private_t *dev_priv )
 {
-	switch ( dev_priv->chipset ) {
+	const unsigned int size = mga_warp_microcode_size(dev_priv);
+
+	DRM_DEBUG("MGA ucode size = %d bytes\n", size);
+	if (size > dev_priv->warp->size) {
+		DRM_ERROR("microcode too large! (%u > %lu)\n",
+			  size, dev_priv->warp->size);
+		return DRM_ERR(ENOMEM);
+	}
+
+	switch (dev_priv->chipset) {
 	case MGA_CARD_TYPE_G400:
-		return mga_warp_install_g400_microcode( dev_priv );
+	case MGA_CARD_TYPE_G550:
+		return mga_warp_install_g400_microcode(dev_priv);
 	case MGA_CARD_TYPE_G200:
 		return mga_warp_install_g200_microcode( dev_priv );
 	default:
@@ -182,10 +170,11 @@
 	 */
 	switch ( dev_priv->chipset ) {
 	case MGA_CARD_TYPE_G400:
-		MGA_WRITE( MGA_WIADDR2, MGA_WMODE_SUSPEND );
-		MGA_WRITE( MGA_WGETMSB, 0x00000E00 );
-		MGA_WRITE( MGA_WVRTXSZ, 0x00001807 );
-		MGA_WRITE( MGA_WACCEPTSEQ, 0x18000000 );
+	case MGA_CARD_TYPE_G550:
+		MGA_WRITE(MGA_WIADDR2, MGA_WMODE_SUSPEND);
+		MGA_WRITE(MGA_WGETMSB, 0x00000E00);
+		MGA_WRITE(MGA_WVRTXSZ, 0x00001807);
+		MGA_WRITE(MGA_WACCEPTSEQ, 0x18000000);
 		break;
 	case MGA_CARD_TYPE_G200:
 		MGA_WRITE( MGA_WIADDR, MGA_WMODE_SUSPEND );