)]}'
{
  "commit": "64ff2aef91afdff7f22eaef05a65b5bc3429ef21",
  "tree": "3f6a0d0259b80798d51a5aefcb2496e3ab95197c",
  "parents": [
    "ebb2ac4f32c32364b6f522270aeb0811829bd3cb"
  ],
  "author": {
    "name": "Florian Fainelli",
    "email": "f.fainelli@gmail.com",
    "time": "Fri Jan 20 12:36:32 2017 -0800"
  },
  "committer": {
    "name": "David S. Miller",
    "email": "davem@davemloft.net",
    "time": "Sun Jan 22 16:58:31 2017 -0500"
  },
  "message": "net: dsa: bcm_sf2: Allow non-IMP ports to have Broadcom tags enabled\n\nParse the \"brcm,use-bcm-hdr\" boolean property during ports\nidentification to fill a bitmask of ports that should have Broadcom tags\nenabled. This is needed in some configurations where per-packet metadata\ncan be exchanged using Broadcom tags between the switch and an on-chip\nacceleration device.\n\nSigned-off-by: Florian Fainelli \u003cf.fainelli@gmail.com\u003e\nSigned-off-by: David S. Miller \u003cdavem@davemloft.net\u003e\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "e1b2c3e32859b298807157fa0fe42b7734901019",
      "old_mode": 33188,
      "old_path": "Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt",
      "new_id": "9a734d808aa7eb2919c87d4bc9dd7440bdd7d2c3",
      "new_mode": 33188,
      "new_path": "Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt"
    },
    {
      "type": "modify",
      "old_id": "571e112c8e343839a197f3610f1906f83aa4efeb",
      "old_mode": 33188,
      "old_path": "drivers/net/dsa/bcm_sf2.c",
      "new_id": "8eecfd227e068b0b14aa7329189dd381aff756a2",
      "new_mode": 33188,
      "new_path": "drivers/net/dsa/bcm_sf2.c"
    },
    {
      "type": "modify",
      "old_id": "a1430866bd7953a0898dc2a3783d2fe866ba88f9",
      "old_mode": 33188,
      "old_path": "drivers/net/dsa/bcm_sf2.h",
      "new_id": "6e1f74e4d471daf982f10517bde7191a13530114",
      "new_mode": 33188,
      "new_path": "drivers/net/dsa/bcm_sf2.h"
    }
  ]
}