[ARM] 4822/1: RealView: Change the REALVIEW_MPCORE configuration option
This patch changes the REALVIEW_MPCORE configuration option to
REALVIEW_EB_ARM11MP since this is only specific to RealView/EB.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a0aeecc..a421a7f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -611,7 +611,7 @@
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && REALVIEW_MPCORE
+ depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
@@ -645,7 +645,7 @@
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && REALVIEW_MPCORE
+ depends on SMP && REALVIEW_EB_ARM11MP
default y
help
Enable support for local timers on SMP platforms, rather then the
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index 35156ca..39b3bb7 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -7,24 +7,21 @@
help
Include support for the ARM(R) RealView Emulation Baseboard platform.
-config REALVIEW_MPCORE
- bool "Support MPcore tile"
+config REALVIEW_EB_ARM11MP
+ bool "Support ARM11MPCore tile"
depends on MACH_REALVIEW_EB
select CACHE_L2X0
help
- Enable support for the MPCore tile on the Realview platform.
- Since there are device address and interrupt differences, a
- kernel built with this option enabled is not compatible with
- other tiles.
+ Enable support for the ARM11MPCore tile on the Realview platform.
-config REALVIEW_MPCORE_REVB
- bool "Support MPcore RevB tile"
- depends on REALVIEW_MPCORE
+config REALVIEW_EB_ARM11MP_REVB
+ bool "Support ARM11MPCore RevB tile"
+ depends on REALVIEW_EB_ARM11MP
default n
help
- Enable support for the MPCore RevB tile on the Realview platform.
- Since there are device address differences, a
+ Enable support for the ARM11MPCore RevB tile on the Realview
+ platform. Since there are device address differences, a
kernel built with this option enabled is not compatible with
- other tiles.
+ other revisions of the ARM11MPCore tile.
endmenu
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 8ded2cc..60d9eb8 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -261,7 +261,7 @@
gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
-#ifndef CONFIG_REALVIEW_MPCORE_REVB
+#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_GIC_DIST_BASE), 64);
gic_cpu_init(1, __io_address(REALVIEW_GIC_CPU_BASE));
diff --git a/include/asm-arm/arch-realview/board-eb.h b/include/asm-arm/arch-realview/board-eb.h
index 9e76b23..3e437b7 100644
--- a/include/asm-arm/arch-realview/board-eb.h
+++ b/include/asm-arm/arch-realview/board-eb.h
@@ -26,7 +26,7 @@
/*
* RealView EB + ARM11MPCore peripheral addresses
*/
-#ifdef CONFIG_REALVIEW_MPCORE_REVB
+#ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB
#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */
#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */
#define REALVIEW_EB11MP_TWD_BASE 0x10100700
@@ -143,7 +143,7 @@
#define NR_IRQS NR_IRQS_EB
#endif
-#if defined(CONFIG_REALVIEW_MPCORE) \
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) \
&& (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
#undef MAX_GIC_NR
#define MAX_GIC_NR NR_GIC_EB11MP
@@ -162,7 +162,7 @@
((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_EB_PROC_MASK) \
== proc_type)
-#ifdef CONFIG_REALVIEW_MPCORE
+#ifdef CONFIG_REALVIEW_EB_ARM11MP
#define core_tile_eb11mp() check_eb_proc(REALVIEW_EB_PROC_ARM11MP)
#else
#define core_tile_eb11mp() 0
