blob: c86b6d90576d0beb227d6cef25ffa010ecdcbeca [file] [log] [blame]
/*
* net/dsa/tag_edsa.c - Ethertype DSA tagging
* Copyright (c) 2008-2009 Marvell Semiconductor
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/etherdevice.h>
#include <linux/list.h>
#include <linux/slab.h>
#include "dsa_priv.h"
#define DSA_HLEN 4
#define EDSA_HLEN 8
static struct sk_buff *edsa_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct dsa_slave_priv *p = netdev_priv(dev);
u8 *edsa_header;
/*
* Convert the outermost 802.1q tag to a DSA tag and prepend
* a DSA ethertype field is the packet is tagged, or insert
* a DSA ethertype plus DSA tag between the addresses and the
* current ethertype field if the packet is untagged.
*/
if (skb->protocol == htons(ETH_P_8021Q)) {
if (skb_cow_head(skb, DSA_HLEN) < 0)
return NULL;
skb_push(skb, DSA_HLEN);
memmove(skb->data, skb->data + DSA_HLEN, 2 * ETH_ALEN);
/*
* Construct tagged FROM_CPU DSA tag from 802.1q tag.
*/
edsa_header = skb->data + 2 * ETH_ALEN;
edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
edsa_header[4] = 0x60 | p->dp->ds->index;
edsa_header[5] = p->dp->index << 3;
/*
* Move CFI field from byte 6 to byte 5.
*/
if (edsa_header[6] & 0x10) {
edsa_header[5] |= 0x01;
edsa_header[6] &= ~0x10;
}
} else {
if (skb_cow_head(skb, EDSA_HLEN) < 0)
return NULL;
skb_push(skb, EDSA_HLEN);
memmove(skb->data, skb->data + EDSA_HLEN, 2 * ETH_ALEN);
/*
* Construct untagged FROM_CPU DSA tag.
*/
edsa_header = skb->data + 2 * ETH_ALEN;
edsa_header[0] = (ETH_P_EDSA >> 8) & 0xff;
edsa_header[1] = ETH_P_EDSA & 0xff;
edsa_header[2] = 0x00;
edsa_header[3] = 0x00;
edsa_header[4] = 0x40 | p->dp->ds->index;
edsa_header[5] = p->dp->index << 3;
edsa_header[6] = 0x00;
edsa_header[7] = 0x00;
}
return skb;
}
static struct sk_buff *edsa_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt)
{
struct dsa_switch_tree *dst = dev->dsa_ptr;
struct dsa_switch *ds;
u8 *edsa_header;
int source_device;
int source_port;
if (unlikely(!pskb_may_pull(skb, EDSA_HLEN)))
return NULL;
/*
* Skip the two null bytes after the ethertype.
*/
edsa_header = skb->data + 2;
/*
* Check that frame type is either TO_CPU or FORWARD.
*/
if ((edsa_header[0] & 0xc0) != 0x00 && (edsa_header[0] & 0xc0) != 0xc0)
return NULL;
/*
* Determine source device and port.
*/
source_device = edsa_header[0] & 0x1f;
source_port = (edsa_header[1] >> 3) & 0x1f;
/*
* Check that the source device exists and that the source
* port is a registered DSA port.
*/
if (source_device >= DSA_MAX_SWITCHES)
return NULL;
ds = dst->ds[source_device];
if (!ds)
return NULL;
if (source_port >= ds->num_ports || !ds->ports[source_port].netdev)
return NULL;
if (unlikely(ds->cpu_port_mask & BIT(source_port)))
return NULL;
/*
* If the 'tagged' bit is set, convert the DSA tag to a 802.1q
* tag and delete the ethertype part. If the 'tagged' bit is
* clear, delete the ethertype and the DSA tag parts.
*/
if (edsa_header[0] & 0x20) {
u8 new_header[4];
/*
* Insert 802.1q ethertype and copy the VLAN-related
* fields, but clear the bit that will hold CFI (since
* DSA uses that bit location for another purpose).
*/
new_header[0] = (ETH_P_8021Q >> 8) & 0xff;
new_header[1] = ETH_P_8021Q & 0xff;
new_header[2] = edsa_header[2] & ~0x10;
new_header[3] = edsa_header[3];
/*
* Move CFI bit from its place in the DSA header to
* its 802.1q-designated place.
*/
if (edsa_header[1] & 0x01)
new_header[2] |= 0x10;
skb_pull_rcsum(skb, DSA_HLEN);
/*
* Update packet checksum if skb is CHECKSUM_COMPLETE.
*/
if (skb->ip_summed == CHECKSUM_COMPLETE) {
__wsum c = skb->csum;
c = csum_add(c, csum_partial(new_header + 2, 2, 0));
c = csum_sub(c, csum_partial(edsa_header + 2, 2, 0));
skb->csum = c;
}
memcpy(edsa_header, new_header, DSA_HLEN);
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - DSA_HLEN,
2 * ETH_ALEN);
} else {
/*
* Remove DSA tag and update checksum.
*/
skb_pull_rcsum(skb, EDSA_HLEN);
memmove(skb->data - ETH_HLEN,
skb->data - ETH_HLEN - EDSA_HLEN,
2 * ETH_ALEN);
}
skb->dev = ds->ports[source_port].netdev;
return skb;
}
const struct dsa_device_ops edsa_netdev_ops = {
.xmit = edsa_xmit,
.rcv = edsa_rcv,
};