blob: 32aa2a2aa260cb59eb10557f2c4159588e350b3c [file] [log] [blame]
/*
* linux/arch/arm/mm/cache-v7m.S
*
* Based on linux/arch/arm/mm/cache-v7.S
*
* Copyright (C) 2001 Deep Blue Solutions Ltd.
* Copyright (C) 2005 ARM Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This is the "shell" of the ARMv7M processor support.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
#include <asm/errno.h>
#include <asm/unwind.h>
#include <asm/v7m.h>
#include "proc-macros.S"
/* Generic V7M read/write macros for memory mapped cache operations */
.macro v7m_cache_read, rt, reg
movw \rt, #:lower16:BASEADDR_V7M_SCB + \reg
movt \rt, #:upper16:BASEADDR_V7M_SCB + \reg
ldr \rt, [\rt]
.endm
.macro v7m_cacheop, rt, tmp, op, c = al
movw\c \tmp, #:lower16:BASEADDR_V7M_SCB + \op
movt\c \tmp, #:upper16:BASEADDR_V7M_SCB + \op
str\c \rt, [\tmp]
.endm
.macro read_ccsidr, rt
v7m_cache_read \rt, V7M_SCB_CCSIDR
.endm
.macro read_clidr, rt
v7m_cache_read \rt, V7M_SCB_CLIDR
.endm
.macro write_csselr, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_CSSELR
.endm
/*
* dcisw: Invalidate data cache by set/way
*/
.macro dcisw, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCISW
.endm
/*
* dccisw: Clean and invalidate data cache by set/way
*/
.macro dccisw, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCCISW
.endm
/*
* dccimvac: Clean and invalidate data cache line by MVA to PoC.
*/
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro dccimvac\c, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCCIMVAC, \c
.endm
.endr
/*
* dcimvac: Invalidate data cache line by MVA to PoC
*/
.irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo
.macro dcimvac\c, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCIMVAC, \c
.endm
.endr
/*
* dccmvau: Clean data cache line by MVA to PoU
*/
.macro dccmvau, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAU
.endm
/*
* dccmvac: Clean data cache line by MVA to PoC
*/
.macro dccmvac, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_DCCMVAC
.endm
/*
* icimvau: Invalidate instruction caches by MVA to PoU
*/
.macro icimvau, rt, tmp
v7m_cacheop \rt, \tmp, V7M_SCB_ICIMVAU
.endm
/*
* Invalidate the icache, inner shareable if SMP, invalidate BTB for UP.
* rt data ignored by ICIALLU(IS), so can be used for the address
*/
.macro invalidate_icache, rt
v7m_cacheop \rt, \rt, V7M_SCB_ICIALLU
mov \rt, #0
.endm
/*
* Invalidate the BTB, inner shareable if SMP.
* rt data ignored by BPIALL, so it can be used for the address
*/
.macro invalidate_bp, rt
v7m_cacheop \rt, \rt, V7M_SCB_BPIALL
mov \rt, #0
.endm
ENTRY(v7m_invalidate_l1)
mov r0, #0
write_csselr r0, r1
read_ccsidr r0
movw r1, #0x7fff
and r2, r1, r0, lsr #13
movw r1, #0x3ff
and r3, r1, r0, lsr #3 @ NumWays - 1
add r2, r2, #1 @ NumSets
and r0, r0, #0x7
add r0, r0, #4 @ SetShift
clz r1, r3 @ WayShift
add r4, r3, #1 @ NumWays
1: sub r2, r2, #1 @ NumSets--
mov r3, r4 @ Temp = NumWays
2: subs r3, r3, #1 @ Temp--
mov r5, r3, lsl r1
mov r6, r2, lsl r0
orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift)
dcisw r5, r6
bgt 2b
cmp r2, #0
bgt 1b
dsb st
isb
ret lr
ENDPROC(v7m_invalidate_l1)
/*
* v7m_flush_icache_all()
*
* Flush the whole I-cache.
*
* Registers:
* r0 - set to 0
*/
ENTRY(v7m_flush_icache_all)
invalidate_icache r0
ret lr
ENDPROC(v7m_flush_icache_all)
/*
* v7m_flush_dcache_all()
*
* Flush the whole D-cache.
*
* Corrupted registers: r0-r7, r9-r11
*/
ENTRY(v7m_flush_dcache_all)
dmb @ ensure ordering with previous memory accesses
read_clidr r0
mov r3, r0, lsr #23 @ move LoC into position
ands r3, r3, #7 << 1 @ extract LoC*2 from clidr
beq finished @ if loc is 0, then no need to clean
start_flush_levels:
mov r10, #0 @ start clean at cache level 0
flush_levels:
add r2, r10, r10, lsr #1 @ work out 3x current cache level
mov r1, r0, lsr r2 @ extract cache type bits from clidr
and r1, r1, #7 @ mask of the bits for current cache only
cmp r1, #2 @ see what cache we have at this level
blt skip @ skip if no cache, or just i-cache
#ifdef CONFIG_PREEMPT
save_and_disable_irqs_notrace r9 @ make cssr&csidr read atomic
#endif
write_csselr r10, r1 @ set current cache level
isb @ isb to sych the new cssr&csidr
read_ccsidr r1 @ read the new csidr
#ifdef CONFIG_PREEMPT
restore_irqs_notrace r9
#endif
and r2, r1, #7 @ extract the length of the cache lines
add r2, r2, #4 @ add 4 (line length offset)
movw r4, #0x3ff
ands r4, r4, r1, lsr #3 @ find maximum number on the way size
clz r5, r4 @ find bit position of way size increment
movw r7, #0x7fff
ands r7, r7, r1, lsr #13 @ extract max number of the index size
loop1:
mov r9, r7 @ create working copy of max index
loop2:
lsl r6, r4, r5
orr r11, r10, r6 @ factor way and cache number into r11
lsl r6, r9, r2
orr r11, r11, r6 @ factor index number into r11
dccisw r11, r6 @ clean/invalidate by set/way
subs r9, r9, #1 @ decrement the index
bge loop2
subs r4, r4, #1 @ decrement the way
bge loop1
skip:
add r10, r10, #2 @ increment cache number
cmp r3, r10
bgt flush_levels
finished:
mov r10, #0 @ switch back to cache level 0
write_csselr r10, r3 @ select current cache level in cssr
dsb st
isb
ret lr
ENDPROC(v7m_flush_dcache_all)
/*
* v7m_flush_cache_all()
*
* Flush the entire cache system.
* The data cache flush is now achieved using atomic clean / invalidates
* working outwards from L1 cache. This is done using Set/Way based cache
* maintenance instructions.
* The instruction cache can still be invalidated back to the point of
* unification in a single instruction.
*
*/
ENTRY(v7m_flush_kern_cache_all)
stmfd sp!, {r4-r7, r9-r11, lr}
bl v7m_flush_dcache_all
invalidate_icache r0
ldmfd sp!, {r4-r7, r9-r11, lr}
ret lr
ENDPROC(v7m_flush_kern_cache_all)
/*
* v7m_flush_cache_all()
*
* Flush all TLB entries in a particular address space
*
* - mm - mm_struct describing address space
*/
ENTRY(v7m_flush_user_cache_all)
/*FALLTHROUGH*/
/*
* v7m_flush_cache_range(start, end, flags)
*
* Flush a range of TLB entries in the specified address space.
*
* - start - start address (may not be aligned)
* - end - end address (exclusive, may not be aligned)
* - flags - vm_area_struct flags describing address space
*
* It is assumed that:
* - we have a VIPT cache.
*/
ENTRY(v7m_flush_user_cache_range)
ret lr
ENDPROC(v7m_flush_user_cache_all)
ENDPROC(v7m_flush_user_cache_range)
/*
* v7m_coherent_kern_range(start,end)
*
* Ensure that the I and D caches are coherent within specified
* region. This is typically used when code has been written to
* a memory region, and will be executed.
*
* - start - virtual start address of region
* - end - virtual end address of region
*
* It is assumed that:
* - the Icache does not read data from the write buffer
*/
ENTRY(v7m_coherent_kern_range)
/* FALLTHROUGH */
/*
* v7m_coherent_user_range(start,end)
*
* Ensure that the I and D caches are coherent within specified
* region. This is typically used when code has been written to
* a memory region, and will be executed.
*
* - start - virtual start address of region
* - end - virtual end address of region
*
* It is assumed that:
* - the Icache does not read data from the write buffer
*/
ENTRY(v7m_coherent_user_range)
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
1:
/*
* We use open coded version of dccmvau otherwise USER() would
* point at movw instruction.
*/
dccmvau r12, r3
add r12, r12, r2
cmp r12, r1
blo 1b
dsb ishst
icache_line_size r2, r3
sub r3, r2, #1
bic r12, r0, r3
2:
icimvau r12, r3
add r12, r12, r2
cmp r12, r1
blo 2b
invalidate_bp r0
dsb ishst
isb
ret lr
UNWIND(.fnend )
ENDPROC(v7m_coherent_kern_range)
ENDPROC(v7m_coherent_user_range)
/*
* v7m_flush_kern_dcache_area(void *addr, size_t size)
*
* Ensure that the data held in the page kaddr is written back
* to the page in question.
*
* - addr - kernel address
* - size - region size
*/
ENTRY(v7m_flush_kern_dcache_area)
dcache_line_size r2, r3
add r1, r0, r1
sub r3, r2, #1
bic r0, r0, r3
1:
dccimvac r0, r3 @ clean & invalidate D line / unified line
add r0, r0, r2
cmp r0, r1
blo 1b
dsb st
ret lr
ENDPROC(v7m_flush_kern_dcache_area)
/*
* v7m_dma_inv_range(start,end)
*
* Invalidate the data cache within the specified region; we will
* be performing a DMA operation in this region and we want to
* purge old data in the cache.
*
* - start - virtual start address of region
* - end - virtual end address of region
*/
v7m_dma_inv_range:
dcache_line_size r2, r3
sub r3, r2, #1
tst r0, r3
bic r0, r0, r3
dccimvacne r0, r3
addne r0, r0, r2
subne r3, r2, #1 @ restore r3, corrupted by v7m's dccimvac
tst r1, r3
bic r1, r1, r3
dccimvacne r1, r3
cmp r0, r1
1:
dcimvaclo r0, r3
addlo r0, r0, r2
cmplo r0, r1
blo 1b
dsb st
ret lr
ENDPROC(v7m_dma_inv_range)
/*
* v7m_dma_clean_range(start,end)
* - start - virtual start address of region
* - end - virtual end address of region
*/
v7m_dma_clean_range:
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
1:
dccmvac r0, r3 @ clean D / U line
add r0, r0, r2
cmp r0, r1
blo 1b
dsb st
ret lr
ENDPROC(v7m_dma_clean_range)
/*
* v7m_dma_flush_range(start,end)
* - start - virtual start address of region
* - end - virtual end address of region
*/
ENTRY(v7m_dma_flush_range)
dcache_line_size r2, r3
sub r3, r2, #1
bic r0, r0, r3
1:
dccimvac r0, r3 @ clean & invalidate D / U line
add r0, r0, r2
cmp r0, r1
blo 1b
dsb st
ret lr
ENDPROC(v7m_dma_flush_range)
/*
* dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(v7m_dma_map_area)
add r1, r1, r0
teq r2, #DMA_FROM_DEVICE
beq v7m_dma_inv_range
b v7m_dma_clean_range
ENDPROC(v7m_dma_map_area)
/*
* dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(v7m_dma_unmap_area)
add r1, r1, r0
teq r2, #DMA_TO_DEVICE
bne v7m_dma_inv_range
ret lr
ENDPROC(v7m_dma_unmap_area)
.globl v7m_flush_kern_cache_louis
.equ v7m_flush_kern_cache_louis, v7m_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions v7m