arch/arm/mach-imx/pm-imx6.c

/*
 * Copyright 2011-2016 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */

#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/genalloc.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/psci.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/mach/map.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/tlb.h>

#include <uapi/linux/psci.h>

#include "common.h"
#include "hardware.h"

#define CCR				0x0
#define BM_CCR_WB_COUNT			(0x7 << 16)
#define BM_CCR_RBC_BYPASS_COUNT		(0x3f << 21)
#define BM_CCR_RBC_EN			(0x1 << 27)

#define CLPCR				0x54
#define BP_CLPCR_LPM			0
#define BM_CLPCR_LPM			(0x3 << 0)
#define BM_CLPCR_BYPASS_PMIC_READY	(0x1 << 2)
#define BM_CLPCR_ARM_CLK_DIS_ON_LPM	(0x1 << 5)
#define BM_CLPCR_SBYOS			(0x1 << 6)
#define BM_CLPCR_DIS_REF_OSC		(0x1 << 7)
#define BM_CLPCR_VSTBY			(0x1 << 8)
#define BP_CLPCR_STBY_COUNT		9
#define BM_CLPCR_STBY_COUNT		(0x3 << 9)
#define BM_CLPCR_COSC_PWRDOWN		(0x1 << 11)
#define BM_CLPCR_WB_PER_AT_LPM		(0x1 << 16)
#define BM_CLPCR_WB_CORE_AT_LPM		(0x1 << 17)
#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS	(0x1 << 19)
#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS	(0x1 << 21)
#define BM_CLPCR_MASK_CORE0_WFI		(0x1 << 22)
#define BM_CLPCR_MASK_CORE1_WFI		(0x1 << 23)
#define BM_CLPCR_MASK_CORE2_WFI		(0x1 << 24)
#define BM_CLPCR_MASK_CORE3_WFI		(0x1 << 25)
#define BM_CLPCR_MASK_SCU_IDLE		(0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE		(0x1 << 27)

#define CGPR				0x64
#define BM_CGPR_INT_MEM_CLK_LPM		(0x1 << 17)
#define CCGR4				0x78
#define CCGR6				0x80

#define MX6Q_SUSPEND_OCRAM_SIZE		0x1000
#define MX6_MAX_MMDC_IO_NUM		36
#define MX6_MAX_MMDC_NUM		36

#define ROMC_ROMPATCH0D			0xf0
#define ROMC_ROMPATCHCNTL		0xf4
#define ROMC_ROMPATCHENL		0xfc
#define ROMC_ROMPATCH0A			0x100
#define BM_ROMPATCHCNTL_0D		(0x1 << 0)
#define BM_ROMPATCHCNTL_DIS		(0x1 << 29)
#define BM_ROMPATCHENL_0D		(0x1 << 0)
#define ROM_ADDR_FOR_INTERNAL_RAM_BASE	0x10d7c

#define UART_UCR1	0x80
#define UART_UCR2	0x84
#define UART_UCR3	0x88
#define UART_UCR4	0x8c
#define UART_UFCR	0x90
#define UART_UESC	0x9c
#define UART_UTIM	0xa0
#define UART_UBIR	0xa4
#define UART_UBMR	0xa8
#define UART_UBRC	0xac
#define UART_UTS	0xb4

#define IOMUXC_GPR5_CLOCK_AFCG_X_BYPASS_MASK	0xf800

extern unsigned long iram_tlb_base_addr;
extern unsigned long iram_tlb_phys_addr;

/* QSPI register layout */
#define QSPI_MCR			0x00
#define QSPI_IPCR			0x08
#define QSPI_BUF0CR			0x10
#define QSPI_BUF1CR			0x14
#define QSPI_BUF2CR			0x18
#define QSPI_BUF3CR			0x1c
#define QSPI_BFGENCR			0x20
#define QSPI_BUF0IND			0x30
#define QSPI_BUF1IND			0x34
#define QSPI_BUF2IND			0x38
#define QSPI_SFAR			0x100
#define QSPI_SMPR			0x108
#define QSPI_RBSR			0x10c
#define QSPI_RBCT			0x110
#define QSPI_TBSR			0x150
#define QSPI_TBDR			0x154
#define QSPI_SFA1AD			0x180
#define QSPI_SFA2AD			0x184
#define QSPI_SFB1AD			0x188
#define QSPI_SFB2AD			0x18c
#define QSPI_RBDR_BASE			0x200
#define QSPI_LUTKEY			0x300
#define QSPI_LCKCR			0x304
#define QSPI_LUT_BASE			0x310

#define QSPI_RBDR_(x)		(QSPI_RBDR_BASE + (x) * 4)
#define QSPI_LUT(x)		(QSPI_LUT_BASE + (x) * 4)

#define QSPI_LUTKEY_VALUE	0x5AF05AF0
#define QSPI_LCKER_LOCK		0x1
#define QSPI_LCKER_UNLOCK	0x2

enum qspi_regs_valuetype {
	QSPI_PREDEFINED,
	QSPI_RETRIEVED,
};

struct qspi_regs {
	int offset;
	unsigned int value;
	enum qspi_regs_valuetype valuetype;
};

struct qspi_regs qspi_regs_imx6sx[] = {
	{QSPI_IPCR, 0, QSPI_RETRIEVED},
	{QSPI_BUF0CR, 0, QSPI_RETRIEVED},
	{QSPI_BUF1CR, 0, QSPI_RETRIEVED},
	{QSPI_BUF2CR, 0, QSPI_RETRIEVED},
	{QSPI_BUF3CR, 0, QSPI_RETRIEVED},
	{QSPI_BFGENCR, 0, QSPI_RETRIEVED},
	{QSPI_BUF0IND, 0, QSPI_RETRIEVED},
	{QSPI_BUF1IND, 0, QSPI_RETRIEVED},
	{QSPI_BUF2IND, 0, QSPI_RETRIEVED},
	{QSPI_SFAR, 0, QSPI_RETRIEVED},
	{QSPI_SMPR, 0, QSPI_RETRIEVED},
	{QSPI_RBSR, 0, QSPI_RETRIEVED},
	{QSPI_RBCT, 0, QSPI_RETRIEVED},
	{QSPI_TBSR, 0, QSPI_RETRIEVED},
	{QSPI_TBDR, 0, QSPI_RETRIEVED},
	{QSPI_SFA1AD, 0, QSPI_RETRIEVED},
	{QSPI_SFA2AD, 0, QSPI_RETRIEVED},
	{QSPI_SFB1AD, 0, QSPI_RETRIEVED},
	{QSPI_SFB2AD, 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(0), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(1), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(2), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(3), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(4), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(5), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(6), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(7), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(8), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(9), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(10), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(11), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(12), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(13), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(14), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(15), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(16), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(17), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(18), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(19), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(20), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(21), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(22), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(23), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(24), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(25), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(26), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(27), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(28), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(29), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(30), 0, QSPI_RETRIEVED},
	{QSPI_RBDR_(31), 0, QSPI_RETRIEVED},
	{QSPI_LUTKEY, QSPI_LUTKEY_VALUE, QSPI_PREDEFINED},
	{QSPI_LCKCR, QSPI_LCKER_UNLOCK, QSPI_PREDEFINED},
	{QSPI_LUT(0), 0, QSPI_RETRIEVED},
	{QSPI_LUT(1), 0, QSPI_RETRIEVED},
	{QSPI_LUT(2), 0, QSPI_RETRIEVED},
	{QSPI_LUT(3), 0, QSPI_RETRIEVED},
	{QSPI_LUT(4), 0, QSPI_RETRIEVED},
	{QSPI_LUT(5), 0, QSPI_RETRIEVED},
	{QSPI_LUT(6), 0, QSPI_RETRIEVED},
	{QSPI_LUT(7), 0, QSPI_RETRIEVED},
	{QSPI_LUT(8), 0, QSPI_RETRIEVED},
	{QSPI_LUT(9), 0, QSPI_RETRIEVED},
	{QSPI_LUT(10), 0, QSPI_RETRIEVED},
	{QSPI_LUT(11), 0, QSPI_RETRIEVED},
	{QSPI_LUT(12), 0, QSPI_RETRIEVED},
	{QSPI_LUT(13), 0, QSPI_RETRIEVED},
	{QSPI_LUT(14), 0, QSPI_RETRIEVED},
	{QSPI_LUT(15), 0, QSPI_RETRIEVED},
	{QSPI_LUT(16), 0, QSPI_RETRIEVED},
	{QSPI_LUT(17), 0, QSPI_RETRIEVED},
	{QSPI_LUT(18), 0, QSPI_RETRIEVED},
	{QSPI_LUT(19), 0, QSPI_RETRIEVED},
	{QSPI_LUT(20), 0, QSPI_RETRIEVED},
	{QSPI_LUT(21), 0, QSPI_RETRIEVED},
	{QSPI_LUT(22), 0, QSPI_RETRIEVED},
	{QSPI_LUT(23), 0, QSPI_RETRIEVED},
	{QSPI_LUT(24), 0, QSPI_RETRIEVED},
	{QSPI_LUT(25), 0, QSPI_RETRIEVED},
	{QSPI_LUT(26), 0, QSPI_RETRIEVED},
	{QSPI_LUT(27), 0, QSPI_RETRIEVED},
	{QSPI_LUT(28), 0, QSPI_RETRIEVED},
	{QSPI_LUT(29), 0, QSPI_RETRIEVED},
	{QSPI_LUT(30), 0, QSPI_RETRIEVED},
	{QSPI_LUT(31), 0, QSPI_RETRIEVED},
	{QSPI_LUT(32), 0, QSPI_RETRIEVED},
	{QSPI_LUT(33), 0, QSPI_RETRIEVED},
	{QSPI_LUT(34), 0, QSPI_RETRIEVED},
	{QSPI_LUT(35), 0, QSPI_RETRIEVED},
	{QSPI_LUT(36), 0, QSPI_RETRIEVED},
	{QSPI_LUT(37), 0, QSPI_RETRIEVED},
	{QSPI_LUT(38), 0, QSPI_RETRIEVED},
	{QSPI_LUT(39), 0, QSPI_RETRIEVED},
	{QSPI_LUT(40), 0, QSPI_RETRIEVED},
	{QSPI_LUT(41), 0, QSPI_RETRIEVED},
	{QSPI_LUT(42), 0, QSPI_RETRIEVED},
	{QSPI_LUT(43), 0, QSPI_RETRIEVED},
	{QSPI_LUT(44), 0, QSPI_RETRIEVED},
	{QSPI_LUT(45), 0, QSPI_RETRIEVED},
	{QSPI_LUT(46), 0, QSPI_RETRIEVED},
	{QSPI_LUT(47), 0, QSPI_RETRIEVED},
	{QSPI_LUT(48), 0, QSPI_RETRIEVED},
	{QSPI_LUT(49), 0, QSPI_RETRIEVED},
	{QSPI_LUT(50), 0, QSPI_RETRIEVED},
	{QSPI_LUT(51), 0, QSPI_RETRIEVED},
	{QSPI_LUT(52), 0, QSPI_RETRIEVED},
	{QSPI_LUT(53), 0, QSPI_RETRIEVED},
	{QSPI_LUT(54), 0, QSPI_RETRIEVED},
	{QSPI_LUT(55), 0, QSPI_RETRIEVED},
	{QSPI_LUT(56), 0, QSPI_RETRIEVED},
	{QSPI_LUT(57), 0, QSPI_RETRIEVED},
	{QSPI_LUT(58), 0, QSPI_RETRIEVED},
	{QSPI_LUT(59), 0, QSPI_RETRIEVED},
	{QSPI_LUT(60), 0, QSPI_RETRIEVED},
	{QSPI_LUT(61), 0, QSPI_RETRIEVED},
	{QSPI_LUT(62), 0, QSPI_RETRIEVED},
	{QSPI_LUT(63), 0, QSPI_RETRIEVED},
	{QSPI_LUTKEY, QSPI_LUTKEY_VALUE, QSPI_PREDEFINED},
	{QSPI_LCKCR, QSPI_LCKER_LOCK, QSPI_PREDEFINED},
	{QSPI_MCR, 0, QSPI_RETRIEVED},
};

static unsigned int *ocram_saved_in_ddr;
static void __iomem *ocram_base;
static void __iomem *console_base;
static void __iomem *qspi_base;
static unsigned int ocram_size;
static void __iomem *ccm_base;
static void __iomem *suspend_ocram_base;
static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);
struct regmap *romcp;

/*
 * suspend ocram space layout:
 * ======================== high address ======================
 *                              .
 *                              .
 *                              .
 *                              ^
 *                              ^
 *                              ^
 *                      imx6_suspend code
 *              PM_INFO structure(imx6_cpu_pm_info)
 * ======================== low address =======================
 */

struct imx6_pm_base {
	phys_addr_t pbase;
	void __iomem *vbase;
};

struct imx6_pm_socdata {
	u32 ddr_type;
	const char *mmdc_compat;
	const char *src_compat;
	const char *iomuxc_compat;
	const char *gpc_compat;
	const char *pl310_compat;
	const u32 mmdc_io_num;
	const u32 *mmdc_io_offset;
	const u32 mmdc_num;
	const u32 *mmdc_offset;
};

static const u32 imx6q_mmdc_io_offset[] __initconst = {
	0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
	0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
	0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
	0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
	0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
	0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
	0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
	0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
	0x74c,			    /* GPR_ADDS */
};

static const u32 imx6q_mmdc_io_lpddr2_offset[] __initconst = {
	0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
	0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
	0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
	0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
	0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
	0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
	0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
	0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
	0x74c, 0x590, 0x598, 0x57c, /* GRP_ADDS, SDCKE0, SDCKE1, RESET */
};

static const u32 imx6dl_mmdc_io_offset[] __initconst = {
	0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
	0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
	0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
	0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
	0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
	0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
	0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
	0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
	0x74c,			    /* GPR_ADDS */
};

static const u32 imx6sl_mmdc_io_offset[] __initconst = {
	0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
	0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
	0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
	0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
	0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
};

static const u32 imx6sx_mmdc_io_lpddr2_offset[] __initconst = {
	0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
	0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
	0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
	0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
	0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
	0x324, 0x328, 0x340,	    /* DRAM_SDCKE0 ~ 1, DRAM_RESET */
};

static const u32 imx6sx_mmdc_lpddr2_offset[] __initconst = {
	0x01c, 0x85c, 0x800, 0x890,
	0x8b8, 0x81c, 0x820, 0x824,
	0x828, 0x82c, 0x830, 0x834,
	0x838, 0x848, 0x850, 0x8c0,
	0x83c, 0x840, 0x8b8, 0x00c,
	0x004, 0x010, 0x014, 0x018,
	0x02c, 0x030, 0x038, 0x008,
	0x040, 0x000, 0x020, 0x818,
	0x800, 0x004, 0x01c,
};

static const u32 imx6sx_mmdc_io_offset[] __initconst = {
	0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
	0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
	0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
	0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
	0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
};

static const u32 imx6sx_mmdc_offset[] __initconst = {
	0x800, 0x80c, 0x810, 0x83c,
	0x840, 0x848, 0x850, 0x81c,
	0x820, 0x824, 0x828, 0x8b8,
	0x004, 0x008, 0x00c, 0x010,
	0x014, 0x018, 0x01c, 0x02c,
	0x030, 0x040, 0x000, 0x01c,
	0x020, 0x818, 0x01c,
};

static const u32 imx6ul_mmdc_io_offset[] __initconst = {
	0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
	0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
	0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
	0x494, 0x4b0,	            /* MODE_CTL, MODE, */
};

static const u32 imx6ul_mmdc_offset[] __initconst = {
	0x01c, 0x800, 0x80c, 0x83c,
	0x848, 0x850, 0x81c, 0x820,
	0x82c, 0x830, 0x8c0, 0x8b8,
	0x004, 0x008, 0x00c, 0x010,
	0x014, 0x018, 0x01c, 0x02c,
	0x030, 0x040, 0x000, 0x01c,
	0x020, 0x818, 0x01c,
};

static const u32 imx6ul_mmdc_io_lpddr2_offset[] __initconst = {
	0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
	0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
	0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
	0x494, 0x4b0, 0x274, 0x278, /* MODE_CTL, MODE, SDCKE0, SDCKE1 */
	0x288,			    /* DRAM_RESET */
};

static const u32 imx6ul_mmdc_lpddr2_offset[] __initconst = {
	0x01c, 0x85c, 0x800, 0x890,
	0x8b8, 0x81c, 0x820, 0x82c,
	0x830, 0x83c, 0x848, 0x850,
	0x8c0, 0x8b8, 0x004, 0x008,
	0x00c, 0x010, 0x038, 0x014,
	0x018, 0x01c, 0x02c, 0x030,
	0x040, 0x000, 0x020, 0x818,
	0x800, 0x004, 0x01c,
};

static const u32 imx6sll_mmdc_io_offset[] __initconst = {
	0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */
	0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */
	0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */
	0x2a4, 0x2a8,		    /* SDCKE0, SDCKE1*/
};

static const u32 imx6sll_mmdc_lpddr3_offset[] __initconst = {
	0x01c, 0x85c, 0x800, 0x890,
	0x8b8, 0x81c, 0x820, 0x82c,
	0x830, 0x83c, 0x848, 0x850,
	0x8c0, 0x8b8, 0x004, 0x008,
	0x00c, 0x010, 0x038, 0x014,
	0x018, 0x01c, 0x02c, 0x030,
	0x040, 0x000, 0x020, 0x818,
	0x800, 0x004, 0x01c,
};

static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6q-mmdc",
	.src_compat = "fsl,imx6q-src",
	.iomuxc_compat = "fsl,imx6q-iomuxc",
	.gpc_compat = "fsl,imx6q-gpc",
	.pl310_compat = "arm,pl310-cache",
	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
	.mmdc_io_offset = imx6q_mmdc_io_offset,
	.mmdc_num = 0,
	.mmdc_offset = NULL,
};

static const struct imx6_pm_socdata imx6q_lpddr2_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6q-mmdc",
	.src_compat = "fsl,imx6q-src",
	.iomuxc_compat = "fsl,imx6q-iomuxc",
	.gpc_compat = "fsl,imx6q-gpc",
	.mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_lpddr2_offset),
	.mmdc_io_offset = imx6q_mmdc_io_lpddr2_offset,
	.mmdc_num = 0,
	.mmdc_offset = NULL,
};

static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6q-mmdc",
	.src_compat = "fsl,imx6q-src",
	.iomuxc_compat = "fsl,imx6dl-iomuxc",
	.gpc_compat = "fsl,imx6q-gpc",
	.pl310_compat = "arm,pl310-cache",
	.mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
	.mmdc_io_offset = imx6dl_mmdc_io_offset,
	.mmdc_num = 0,
	.mmdc_offset = NULL,
};

static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6sl-mmdc",
	.src_compat = "fsl,imx6sl-src",
	.iomuxc_compat = "fsl,imx6sl-iomuxc",
	.gpc_compat = "fsl,imx6sl-gpc",
	.pl310_compat = "arm,pl310-cache",
	.mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
	.mmdc_io_offset = imx6sl_mmdc_io_offset,
	.mmdc_num = 0,
	.mmdc_offset = NULL,
};

static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6sx-mmdc",
	.src_compat = "fsl,imx6sx-src",
	.iomuxc_compat = "fsl,imx6sx-iomuxc",
	.gpc_compat = "fsl,imx6sx-gpc",
	.pl310_compat = "arm,pl310-cache",
	.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
	.mmdc_io_offset = imx6sx_mmdc_io_offset,
	.mmdc_num = ARRAY_SIZE(imx6sx_mmdc_offset),
	.mmdc_offset = imx6sx_mmdc_offset,
};

static const struct imx6_pm_socdata imx6sx_lpddr2_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6sx-mmdc",
	.src_compat = "fsl,imx6sx-src",
	.iomuxc_compat = "fsl,imx6sx-iomuxc",
	.gpc_compat = "fsl,imx6sx-gpc",
	.mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_lpddr2_offset),
	.mmdc_io_offset = imx6sx_mmdc_io_lpddr2_offset,
	.mmdc_num = ARRAY_SIZE(imx6sx_mmdc_lpddr2_offset),
	.mmdc_offset = imx6sx_mmdc_lpddr2_offset,
};

static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6ul-mmdc",
	.src_compat = "fsl,imx6ul-src",
	.iomuxc_compat = "fsl,imx6ul-iomuxc",
	.gpc_compat = "fsl,imx6ul-gpc",
	.pl310_compat = NULL,
	.mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
	.mmdc_io_offset = imx6ul_mmdc_io_offset,
	.mmdc_num = ARRAY_SIZE(imx6ul_mmdc_offset),
	.mmdc_offset = imx6ul_mmdc_offset,
};

static const struct imx6_pm_socdata imx6ul_lpddr2_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6ul-mmdc",
	.src_compat = "fsl,imx6ul-src",
	.iomuxc_compat = "fsl,imx6ul-iomuxc",
	.gpc_compat = "fsl,imx6ul-gpc",
	.mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_lpddr2_offset),
	.mmdc_io_offset = imx6ul_mmdc_io_lpddr2_offset,
	.mmdc_num = ARRAY_SIZE(imx6ul_mmdc_lpddr2_offset),
	.mmdc_offset = imx6ul_mmdc_lpddr2_offset,
};

static const struct imx6_pm_socdata imx6sll_pm_data __initconst = {
	.mmdc_compat = "fsl,imx6sll-mmdc",
	.src_compat = "fsl,imx6sll-src",
	.iomuxc_compat = "fsl,imx6sll-iomuxc",
	.gpc_compat = "fsl,imx6sll-gpc",
	.mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset),
	.mmdc_io_offset = imx6sll_mmdc_io_offset,
	.mmdc_num = ARRAY_SIZE(imx6sll_mmdc_lpddr3_offset),
	.mmdc_offset = imx6sll_mmdc_lpddr3_offset,
};

static struct map_desc iram_tlb_io_desc __initdata = {
	/* .virtual and .pfn are run-time assigned */
	.length     = SZ_1M,
	.type       = MT_MEMORY_RWX_NONCACHED,
};

/*
 * AIPS1 and AIPS2 is not used, because it will trigger a BUG_ON if
 * lowlevel debug and earlyprintk are configured.
 *
 * it is because there is a vm conflict because UART1 is mapped early if
 * AIPS1 is mapped using 1M size.
 *
 * Thus no use AIPS1 and AIPS2 to avoid kernel BUG_ON.
 */
static struct map_desc imx6_pm_io_desc[] __initdata = {
	imx_map_entry(MX6Q, MMDC_P0, MT_DEVICE),
	imx_map_entry(MX6Q, MMDC_P1, MT_DEVICE),
	imx_map_entry(MX6Q, SRC, MT_DEVICE),
	imx_map_entry(MX6Q, IOMUXC, MT_DEVICE),
	imx_map_entry(MX6Q, CCM, MT_DEVICE),
	imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
	imx_map_entry(MX6Q, GPC, MT_DEVICE),
	imx_map_entry(MX6Q, L2,	MT_DEVICE),
};

static const char * const low_power_ocram_match[] __initconst = {
	"fsl,lpm-sram",
	NULL
};

/*
 * This structure is for passing necessary data for low level ocram
 * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
 * definition is changed, the offset definition in
 * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
 * otherwise, the suspend to ocram function will be broken!
 */
struct imx6_cpu_pm_info {
	phys_addr_t pbase; /* The physical address of pm_info. */
	phys_addr_t resume_addr; /* The physical resume address for asm code */
	u32 ddr_type;
	u32 pm_info_size; /* Size of pm_info. */
	struct imx6_pm_base mmdc0_base;
	struct imx6_pm_base mmdc1_base;
	struct imx6_pm_base src_base;
	struct imx6_pm_base iomuxc_base;
	struct imx6_pm_base ccm_base;
	struct imx6_pm_base gpc_base;
	struct imx6_pm_base l2_base;
	struct imx6_pm_base anatop_base;
	u32 ttbr1; /* Store TTBR1 */
	u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
	u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][3]; /* To save offset, value, low power settings */
	u32 mmdc_num; /* Number of MMDC registers which need saved/restored. */
	u32 mmdc_val[MX6_MAX_MMDC_NUM][2];
} __aligned(8);

void imx6_set_int_mem_clk_lpm(bool enable)
{
	u32 val = readl_relaxed(ccm_base + CGPR);

	val &= ~BM_CGPR_INT_MEM_CLK_LPM;
	if (enable)
		val |= BM_CGPR_INT_MEM_CLK_LPM;
	writel_relaxed(val, ccm_base + CGPR);
}

void imx6_enable_rbc(bool enable)
{
	u32 val;

	/*
	 * need to mask all interrupts in GPC before
	 * operating RBC configurations
	 */
	imx_gpc_mask_all();

	/* configure RBC enable bit */
	val = readl_relaxed(ccm_base + CCR);
	val &= ~BM_CCR_RBC_EN;
	val |= enable ? BM_CCR_RBC_EN : 0;
	writel_relaxed(val, ccm_base + CCR);

	/* configure RBC count */
	val = readl_relaxed(ccm_base + CCR);
	val &= ~BM_CCR_RBC_BYPASS_COUNT;
	val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
	writel(val, ccm_base + CCR);

	/*
	 * need to delay at least 2 cycles of CKIL(32K)
	 * due to hardware design requirement, which is
	 * ~61us, here we use 65us for safe
	 */
	udelay(65);

	/* restore GPC interrupt mask settings */
	imx_gpc_restore_all();
}

static void imx6q_enable_wb(bool enable)
{
	u32 val;

	/* configure well bias enable bit */
	val = readl_relaxed(ccm_base + CLPCR);
	val &= ~BM_CLPCR_WB_PER_AT_LPM;
	val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
	writel_relaxed(val, ccm_base + CLPCR);

	/* configure well bias count */
	val = readl_relaxed(ccm_base + CCR);
	val &= ~BM_CCR_WB_COUNT;
	val |= enable ? BM_CCR_WB_COUNT : 0;
	writel_relaxed(val, ccm_base + CCR);
}

int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
{
	u32 val = readl_relaxed(ccm_base + CLPCR);

	val &= ~BM_CLPCR_LPM;
	switch (mode) {
	case WAIT_CLOCKED:
		break;
	case WAIT_UNCLOCKED:
		val |= 0x1 << BP_CLPCR_LPM;
		val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
		break;
	case STOP_POWER_ON:
		val |= 0x2 << BP_CLPCR_LPM;
		val &= ~BM_CLPCR_VSTBY;
		val &= ~BM_CLPCR_SBYOS;
		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6sll())
			val |= BM_CLPCR_BYPASS_PMIC_READY;
		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
		    cpu_is_imx6ull() || cpu_is_imx6sll())
			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
		else if (cpu_is_imx6q() &&
		    imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2 &&
		    imx_mmdc_get_lpddr2_2ch_mode() == IMX_LPDDR2_2CH_MODE) {
			/* keep handshake enabled for lpddr2 2ch-mode */
			val &= ~BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
			val &= ~BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
		}
		else
			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
		break;
	case WAIT_UNCLOCKED_POWER_OFF:
		val |= 0x1 << BP_CLPCR_LPM;
		val &= ~BM_CLPCR_VSTBY;
		val &= ~BM_CLPCR_SBYOS;
		break;
	case STOP_POWER_OFF:
		val |= 0x2 << BP_CLPCR_LPM;
		val |= 0x3 << BP_CLPCR_STBY_COUNT;
		val |= BM_CLPCR_VSTBY;
		val |= BM_CLPCR_SBYOS;
		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6sll())
			val |= BM_CLPCR_BYPASS_PMIC_READY;
		if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
		    cpu_is_imx6ull() || cpu_is_imx6sll())
			val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
		else if (cpu_is_imx6q() &&
		    imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2 &&
		    imx_mmdc_get_lpddr2_2ch_mode() == IMX_LPDDR2_2CH_MODE) {
			/* keep handshake enabled for lpddr2 2ch-mode */
			val &= ~BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
			val &= ~BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
		}
		else
			val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
		break;
	default:
		return -EINVAL;
	}

	/*
	 * ERR007265: CCM: When improper low-power sequence is used,
	 * the SoC enters low power mode before the ARM core executes WFI.
	 *
	 * Software workaround:
	 * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
	 *    by setting IOMUX_GPR1_GINT.
	 * 2) Software should then unmask IRQ #32 in GPC before setting CCM
	 *    Low-Power mode.
	 * 3) Software should mask IRQ #32 right after CCM Low-Power mode
	 *    is set (set bits 0-1 of CCM_CLPCR).
	 *
	 * Note that IRQ #32 is GIC SPI #0.
	 */
	if (mode != WAIT_CLOCKED)
		imx_gpc_hwirq_unmask(0);
	writel_relaxed(val, ccm_base + CLPCR);
	if (mode != WAIT_CLOCKED)
		imx_gpc_hwirq_mask(0);

	return 0;
}

#define MX6Q_SUSPEND_PARAM	\
	((0 << PSCI_0_2_POWER_STATE_ID_SHIFT) | \
	 (1 << PSCI_0_2_POWER_STATE_AFFL_SHIFT) | \
	 (PSCI_POWER_STATE_TYPE_POWER_DOWN << PSCI_0_2_POWER_STATE_TYPE_SHIFT))

static int imx6q_suspend_finish(unsigned long val)
{
	if (psci_ops.cpu_suspend) {
		return psci_ops.cpu_suspend(MX6Q_SUSPEND_PARAM,
					    __pa(cpu_resume));
	}

	if (!imx6_suspend_in_ocram_fn) {
		cpu_do_idle();
	} else {
		/*
		 * call low level suspend function in ocram,
		 * as we need to float DDR IO.
		 */
		local_flush_tlb_all();
		/* check if need to flush internal L2 cache */
		if (!((struct imx6_cpu_pm_info *)
			suspend_ocram_base)->l2_base.vbase)
			flush_cache_all();
		imx6_suspend_in_ocram_fn(suspend_ocram_base);
	}

	return 0;
}

static void imx6_console_save(unsigned int *regs)
{
	if (!console_base)
		return;

	regs[0] = readl_relaxed(console_base + UART_UCR1);
	regs[1] = readl_relaxed(console_base + UART_UCR2);
	regs[2] = readl_relaxed(console_base + UART_UCR3);
	regs[3] = readl_relaxed(console_base + UART_UCR4);
	regs[4] = readl_relaxed(console_base + UART_UFCR);
	regs[5] = readl_relaxed(console_base + UART_UESC);
	regs[6] = readl_relaxed(console_base + UART_UTIM);
	regs[7] = readl_relaxed(console_base + UART_UBIR);
	regs[8] = readl_relaxed(console_base + UART_UBMR);
	regs[9] = readl_relaxed(console_base + UART_UTS);
}

static void imx6_console_restore(unsigned int *regs)
{
	if (!console_base)
		return;

	writel_relaxed(regs[4], console_base + UART_UFCR);
	writel_relaxed(regs[5], console_base + UART_UESC);
	writel_relaxed(regs[6], console_base + UART_UTIM);
	writel_relaxed(regs[7], console_base + UART_UBIR);
	writel_relaxed(regs[8], console_base + UART_UBMR);
	writel_relaxed(regs[9], console_base + UART_UTS);
	writel_relaxed(regs[0], console_base + UART_UCR1);
	writel_relaxed(regs[1] | 0x1, console_base + UART_UCR2);
	writel_relaxed(regs[2], console_base + UART_UCR3);
	writel_relaxed(regs[3], console_base + UART_UCR4);
}

static void imx6_qspi_save(struct qspi_regs *pregs, int reg_num)
{
	int i;

	if (!qspi_base)
		return;

	for (i = 0; i < reg_num; i++) {
		if (QSPI_RETRIEVED == pregs[i].valuetype)
			pregs[i].value = readl_relaxed(qspi_base +
				pregs[i].offset);
	}
}

static void imx6_qspi_restore(struct qspi_regs *pregs, int reg_num)
{
	int i;

	if (!qspi_base)
		return;

	for (i = 0; i < reg_num; i++)
		writel_relaxed(pregs[i].value, qspi_base + pregs[i].offset);
}

static int imx6q_pm_enter(suspend_state_t state)
{
	unsigned int console_saved_reg[10] = {0};
	static unsigned int ccm_ccgr4, ccm_ccgr6;

#ifdef CONFIG_SOC_IMX6SX
	if (imx_src_is_m4_enabled()) {
		if (imx_gpc_is_m4_sleeping() && imx_mu_is_m4_in_low_freq()) {
			imx_gpc_hold_m4_in_sleep();
			imx_mu_enable_m4_irqs_in_gic(true);
		} else {
			pr_info("M4 is busy, enter WAIT mode instead of STOP!\n");
			imx6_set_lpm(WAIT_UNCLOCKED);
			imx6_set_int_mem_clk_lpm(true);
			imx_gpc_pre_suspend(false);
			/* Zzz ... */
			cpu_do_idle();
			imx_gpc_post_resume();
			imx6_set_lpm(WAIT_CLOCKED);

			return 0;
		}
	}
#endif
	switch (state) {
	case PM_SUSPEND_STANDBY:
		imx6_set_lpm(STOP_POWER_ON);
		imx6_set_int_mem_clk_lpm(true);
		imx_gpc_pre_suspend(false);
#ifdef CONFIG_SOC_IMX6SL
		if (cpu_is_imx6sl())
			imx6sl_set_wait_clk(true);
#endif
		/* Zzz ... */
		cpu_do_idle();
#ifdef CONFIG_SOC_IMX6SL
		if (cpu_is_imx6sl())
			imx6sl_set_wait_clk(false);
#endif
		imx_gpc_post_resume();
		imx6_set_lpm(WAIT_CLOCKED);
		break;
	case PM_SUSPEND_MEM:
		imx6_set_lpm(STOP_POWER_OFF);
		imx6_set_int_mem_clk_lpm(false);
		imx6q_enable_wb(true);
		/*
		 * For suspend into ocram, asm code already take care of
		 * RBC setting, so we do NOT need to do that here.
		 */
		if (!imx6_suspend_in_ocram_fn)
			imx6_enable_rbc(true);
		imx_gpc_pre_suspend(true);
		imx_anatop_pre_suspend();
		if ((cpu_is_imx6ull() || cpu_is_imx6sll()) &&
			imx_gpc_is_mf_mix_off())
			imx6_console_save(console_saved_reg);
		if (cpu_is_imx6sx() && imx_gpc_is_mf_mix_off()) {
			ccm_ccgr4 = readl_relaxed(ccm_base + CCGR4);
			ccm_ccgr6 = readl_relaxed(ccm_base + CCGR6);
			/*
			 * i.MX6SX RDC needs PCIe and eim clk to be enabled
			 * if Mega/Fast off, it is better to check cpu type
			 * and whether Mega/Fast is off in this suspend flow,
			 * but we need to add cpu type check for 3 places which
			 * will increase code size, so here we just do it
			 * for all cases, as when STOP mode is entered, CCM
			 * hardware will gate all clocks, so it will NOT impact
			 * any function or power.
			 */
			writel_relaxed(ccm_ccgr4 | (0x3 << 0), ccm_base +
				CCGR4);
			writel_relaxed(ccm_ccgr6 | (0x3 << 10), ccm_base +
				CCGR6);
			memcpy(ocram_saved_in_ddr, ocram_base, ocram_size);
			imx6_console_save(console_saved_reg);
			if (imx_src_is_m4_enabled())
				imx6_qspi_save(qspi_regs_imx6sx,
					sizeof(qspi_regs_imx6sx) /
					sizeof(struct qspi_regs));
		}

		/* Zzz ... */
		cpu_suspend(0, imx6q_suspend_finish);

		if (cpu_is_imx6sx() && imx_gpc_is_mf_mix_off()) {
			writel_relaxed(ccm_ccgr4, ccm_base + CCGR4);
			writel_relaxed(ccm_ccgr6, ccm_base + CCGR6);
			memcpy(ocram_base, ocram_saved_in_ddr, ocram_size);
			imx6_console_restore(console_saved_reg);
			if (imx_src_is_m4_enabled())
				imx6_qspi_restore(qspi_regs_imx6sx,
					sizeof(qspi_regs_imx6sx) /
					sizeof(struct qspi_regs));
		}
		if ((cpu_is_imx6ull() || cpu_is_imx6sll()) &&
			imx_gpc_is_mf_mix_off())
			imx6_console_restore(console_saved_reg);
		if (cpu_is_imx6q() || cpu_is_imx6dl())
			imx_smp_prepare();
		imx_anatop_post_resume();
		imx_gpc_post_resume();
		imx6_enable_rbc(false);
		imx6q_enable_wb(false);
		imx6_set_int_mem_clk_lpm(true);
		imx6_set_lpm(WAIT_CLOCKED);
		break;
	default:
		return -EINVAL;
	}

#ifdef CONFIG_SOC_IMX6SX
	if (imx_src_is_m4_enabled()) {
		imx_mu_enable_m4_irqs_in_gic(false);
		imx_gpc_release_m4_in_sleep();
	}
#endif

	return 0;
}

static int imx6q_pm_valid(suspend_state_t state)
{
	return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
}

static const struct platform_suspend_ops imx6q_pm_ops = {
	.enter = imx6q_pm_enter,
	.valid = imx6q_pm_valid,
};

static int __init imx6_dt_find_lpsram(unsigned long node, const char *uname,
				      int depth, void *data)
{
	unsigned long lpram_addr;
	const __be32 *prop = of_get_flat_dt_prop(node, "reg", NULL);

	if (of_flat_dt_match(node, low_power_ocram_match)) {
		if (!prop)
			return -EINVAL;

		lpram_addr = be32_to_cpup(prop);

		/* We need to create a 1M page table entry. */
		iram_tlb_io_desc.virtual = IMX_IO_P2V(lpram_addr & 0xFFF00000);
		iram_tlb_io_desc.pfn = __phys_to_pfn(lpram_addr & 0xFFF00000);
		iram_tlb_phys_addr = lpram_addr;
		iram_tlb_base_addr = IMX_IO_P2V(lpram_addr);

		iotable_init(&iram_tlb_io_desc, 1);
	}

	return 0;
}

void __init imx6_pm_map_io(void)
{
	unsigned long i;

	iotable_init(imx6_pm_io_desc, ARRAY_SIZE(imx6_pm_io_desc));

	/*
	 * Get the address of IRAM or OCRAM to be used by the low
	 * power code from the device tree.
	 */
	WARN_ON(of_scan_flat_dt(imx6_dt_find_lpsram, NULL));

	/*
	 * We moved suspend/resume and lowpower idle to TEE,
	 * But busfreq now still in Linux, this table is still needed
	 * If we later decide to move busfreq to TEE, we could drop this.
	 */
	/* Return if no IRAM space is allocated for suspend/resume code. */
	if (!iram_tlb_base_addr) {
		pr_warn("No IRAM/OCRAM memory allocated for suspend/resume \
			 code. Please ensure device tree has an entry for \
			 fsl,lpm-sram.\n");
		return;
	}

	/* Set all entries to 0. */
	memset((void *)iram_tlb_base_addr, 0, MX6Q_IRAM_TLB_SIZE);

	/*
	 * Make sure the IRAM virtual address has a mapping in the IRAM
	 * page table.
	 *
	 * Only use the top 11 bits [31-20] when storing the physical
	 * address in the page table as only these bits are required
	 * for 1M mapping.
	 */
	i = ((iram_tlb_base_addr >> 20) << 2) / 4;
	*((unsigned long *)iram_tlb_base_addr + i) =
		(iram_tlb_phys_addr & 0xFFF00000) | TT_ATTRIB_NON_CACHEABLE_1M;

	/*
	 * Make sure the AIPS1 virtual address has a mapping in the
	 * IRAM page table.
	 */
	i = ((IMX_IO_P2V(MX6Q_AIPS1_BASE_ADDR) >> 20) << 2) / 4;
	*((unsigned long *)iram_tlb_base_addr + i) =
		(MX6Q_AIPS1_BASE_ADDR & 0xFFF00000) |
		TT_ATTRIB_NON_CACHEABLE_1M;

	/*
	 * Make sure the AIPS2 virtual address has a mapping in the
	 * IRAM page table.
	 */
	i = ((IMX_IO_P2V(MX6Q_AIPS2_BASE_ADDR) >> 20) << 2) / 4;
	*((unsigned long *)iram_tlb_base_addr + i) =
		(MX6Q_AIPS2_BASE_ADDR & 0xFFF00000) |
		TT_ATTRIB_NON_CACHEABLE_1M;

	/*
	 * Make sure the AIPS3 virtual address has a mapping
	 * in the IRAM page table.
	 */
	i = ((IMX_IO_P2V(MX6Q_AIPS3_BASE_ADDR) >> 20) << 2) / 4;
		*((unsigned long *)iram_tlb_base_addr + i) =
		(MX6Q_AIPS3_BASE_ADDR & 0xFFF00000) |
		TT_ATTRIB_NON_CACHEABLE_1M;

	/*
	 * Make sure the L2 controller virtual address has a mapping
	 * in the IRAM page table.
	 */
	i = ((IMX_IO_P2V(MX6Q_L2_BASE_ADDR) >> 20) << 2) / 4;
	*((unsigned long *)iram_tlb_base_addr + i) =
		(MX6Q_L2_BASE_ADDR & 0xFFF00000) | TT_ATTRIB_NON_CACHEABLE_1M;
}

static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
{
	struct device_node *node;
	struct imx6_cpu_pm_info *pm_info;
	unsigned long iram_paddr;
	int i, ret = 0;
	const u32 *mmdc_offset_array;
	const u32 *mmdc_io_offset_array;

	suspend_set_ops(&imx6q_pm_ops);

	if (!socdata) {
		pr_warn("%s: invalid argument!\n", __func__);
		return -EINVAL;
	}

	if (psci_ops.cpu_suspend) {
		/* TODO: seems not needed */
		/* of_node_put(node); */
		return ret;
	}

	/*
	 * 16KB is allocated for IRAM TLB, but only up 8k is for kernel TLB,
	 * The lower 8K is not used, so use the lower 8K for IRAM code and
	 * pm_info.
	 *
	 */
	iram_paddr = iram_tlb_phys_addr + MX6_SUSPEND_IRAM_ADDR_OFFSET;

	/* Make sure iram_paddr is 8 byte aligned. */
	if ((uintptr_t)(iram_paddr) & (FNCPY_ALIGN - 1))
		iram_paddr += FNCPY_ALIGN - iram_paddr % (FNCPY_ALIGN);

	/* Get the virtual address of the suspend code. */
	suspend_ocram_base = (void *)IMX_IO_P2V(iram_paddr);

	memset(suspend_ocram_base, 0, sizeof(*pm_info));
	pm_info = suspend_ocram_base;
	pm_info->pbase = iram_paddr;
	pm_info->resume_addr = __pa_symbol(v7_cpu_resume);
	pm_info->pm_info_size = sizeof(*pm_info);

	/*
	 * ccm physical address is not used by asm code currently,
	 * so get ccm virtual address directly.
	 */
	pm_info->ccm_base.pbase = MX6Q_CCM_BASE_ADDR;
	pm_info->ccm_base.vbase = (void __iomem *)
				   IMX_IO_P2V(MX6Q_CCM_BASE_ADDR);

	pm_info->mmdc0_base.pbase = MX6Q_MMDC_P0_BASE_ADDR;
	pm_info->mmdc0_base.vbase = (void __iomem *)
				    IMX_IO_P2V(MX6Q_MMDC_P0_BASE_ADDR);

	pm_info->mmdc1_base.pbase = MX6Q_MMDC_P1_BASE_ADDR;
	pm_info->mmdc1_base.vbase = (void __iomem *)
				    IMX_IO_P2V(MX6Q_MMDC_P1_BASE_ADDR);

	pm_info->src_base.pbase = MX6Q_SRC_BASE_ADDR;
	pm_info->src_base.vbase = (void __iomem *)
				   IMX_IO_P2V(MX6Q_SRC_BASE_ADDR);

	pm_info->iomuxc_base.pbase = MX6Q_IOMUXC_BASE_ADDR;
	pm_info->iomuxc_base.vbase = (void __iomem *)
				      IMX_IO_P2V(MX6Q_IOMUXC_BASE_ADDR);

	pm_info->gpc_base.pbase = MX6Q_GPC_BASE_ADDR;
	pm_info->gpc_base.vbase = (void __iomem *)
				   IMX_IO_P2V(MX6Q_GPC_BASE_ADDR);

	pm_info->l2_base.pbase = MX6Q_L2_BASE_ADDR;
	pm_info->l2_base.vbase = (void __iomem *)
				  IMX_IO_P2V(MX6Q_L2_BASE_ADDR);

	pm_info->anatop_base.pbase = MX6Q_ANATOP_BASE_ADDR;
	pm_info->anatop_base.vbase = (void __iomem *)
				  IMX_IO_P2V(MX6Q_ANATOP_BASE_ADDR);

	pm_info->ddr_type = imx_mmdc_get_ddr_type();
	pm_info->mmdc_io_num = socdata->mmdc_io_num;
	mmdc_io_offset_array = socdata->mmdc_io_offset;
	pm_info->mmdc_num = socdata->mmdc_num;
	mmdc_offset_array = socdata->mmdc_offset;

	for (i = 0; i < pm_info->mmdc_io_num; i++) {
		pm_info->mmdc_io_val[i][0] =
			mmdc_io_offset_array[i];
		pm_info->mmdc_io_val[i][1] =
			readl_relaxed(pm_info->iomuxc_base.vbase +
			mmdc_io_offset_array[i]);
		pm_info->mmdc_io_val[i][2] = 0;
	}

	/* i.MX6SLL has no DRAM RESET pin */
	if (cpu_is_imx6sll()) {
			pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000;
			pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x1000;
	} else {
		if (pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) {
			/* for LPDDR2, CKE0/1 and RESET pin need special setting */
			pm_info->mmdc_io_val[pm_info->mmdc_io_num - 3][2] = 0x1000;
			pm_info->mmdc_io_val[pm_info->mmdc_io_num - 2][2] = 0x1000;
			pm_info->mmdc_io_val[pm_info->mmdc_io_num - 1][2] = 0x80000;
		}
	}

	/* initialize MMDC settings */
	for (i = 0; i < pm_info->mmdc_num; i++) {
		pm_info->mmdc_val[i][0] =
			mmdc_offset_array[i];
		pm_info->mmdc_val[i][1] =
			readl_relaxed(pm_info->mmdc0_base.vbase +
			mmdc_offset_array[i]);
	}

	if (cpu_is_imx6sll() && pm_info->ddr_type == IMX_MMDC_DDR_TYPE_LPDDR3) {
		pm_info->mmdc_val[0][1] = 0x8000;
		pm_info->mmdc_val[2][1] = 0xa1390003;
		pm_info->mmdc_val[3][1] = 0x400000;
		pm_info->mmdc_val[4][1] = 0x800;
		pm_info->mmdc_val[13][1] = 0x800;
		pm_info->mmdc_val[14][1] = 0x20052;
		pm_info->mmdc_val[20][1] = 0x201718;
		pm_info->mmdc_val[21][1] = 0x8000;
		pm_info->mmdc_val[28][1] = 0xa1310003;
	}

	/* need to overwrite the value for some mmdc registers */
	if ((cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull()) &&
		pm_info->ddr_type != IMX_DDR_TYPE_LPDDR2) {
		pm_info->mmdc_val[20][1] = (pm_info->mmdc_val[20][1]
			& 0xffff0000) | 0x0202;
		pm_info->mmdc_val[23][1] = 0x8033;
	}

	if (cpu_is_imx6sx() &&
		pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) {
		pm_info->mmdc_val[0][1] = 0x8000;
		pm_info->mmdc_val[2][1] = 0xa1390003;
		pm_info->mmdc_val[3][1] = 0x380000;
		pm_info->mmdc_val[4][1] = 0x800;
		pm_info->mmdc_val[18][1] = 0x800;
		pm_info->mmdc_val[20][1] = 0x20024;
		pm_info->mmdc_val[23][1] = 0x1748;
		pm_info->mmdc_val[32][1] = 0xa1310003;
	}

	if ((cpu_is_imx6ul() || cpu_is_imx6ull()) &&
		pm_info->ddr_type == IMX_DDR_TYPE_LPDDR2) {
		pm_info->mmdc_val[0][1] = 0x8000;
		pm_info->mmdc_val[2][1] = 0xa1390003;
		pm_info->mmdc_val[3][1] = 0x470000;
		pm_info->mmdc_val[4][1] = 0x800;
		pm_info->mmdc_val[13][1] = 0x800;
		pm_info->mmdc_val[14][1] = 0x20012;
		pm_info->mmdc_val[20][1] = 0x1748;
		pm_info->mmdc_val[21][1] = 0x8000;
		pm_info->mmdc_val[28][1] = 0xa1310003;
	}

	imx6_suspend_in_ocram_fn = fncpy(
		suspend_ocram_base + sizeof(*pm_info),
		&imx6_suspend,
		MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));

	goto put_node;

put_node:
	of_node_put(node);

	return ret;
}

static void __init imx6_pm_common_init(const struct imx6_pm_socdata
					*socdata)
{
	struct regmap *gpr;
	int ret;

	WARN_ON(!ccm_base);

	if (IS_ENABLED(CONFIG_SUSPEND)) {
		ret = imx6q_suspend_init(socdata);
		if (ret)
			pr_warn("%s: No DDR LPM support with suspend %d!\n",
				__func__, ret);
	}

	/*
	 * This is for SW workaround step #1 of ERR007265, see comments
	 * in imx6_set_lpm for details of this errata.
	 * Force IOMUXC irq pending, so that the interrupt to GPC can be
	 * used to deassert dsm_request signal when the signal gets
	 * asserted unexpectedly.
	 */
	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
	if (!IS_ERR(gpr))
		regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
				   IMX6Q_GPR1_GINT);
}

void __init imx6_pm_ccm_init(const char *ccm_compat)
{
	struct device_node *np;
	u32 val;

	np = of_find_compatible_node(NULL, NULL, ccm_compat);
	ccm_base = of_iomap(np, 0);
	BUG_ON(!ccm_base);

	/*
	 * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
	 * clock being shut down unexpectedly by WAIT mode.
	 */
	val = readl_relaxed(ccm_base + CLPCR);
	val &= ~BM_CLPCR_LPM;
	writel_relaxed(val, ccm_base + CLPCR);
}

void __init imx6q_pm_init(void)
{
	if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
		imx6_pm_common_init(&imx6q_lpddr2_pm_data);
	else
		imx6_pm_common_init(&imx6q_pm_data);
}

void __init imx6dl_pm_init(void)
{
	imx6_pm_common_init(&imx6dl_pm_data);
}

void __init imx6sl_pm_init(void)
{
	struct device_node *np;
	struct regmap *gpr;

	if (cpu_is_imx6sll()) {
		imx6_pm_common_init(&imx6sll_pm_data);
		np = of_find_node_by_path(
			"/soc/aips-bus@02000000/spba-bus@02000000/serial@02020000");
		if (np)
			console_base = of_iomap(np, 0);
		/* i.MX6SLL has bus auto clock gating function */
		gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
		if (!IS_ERR(gpr))
			regmap_update_bits(gpr, IOMUXC_GPR5,
				IOMUXC_GPR5_CLOCK_AFCG_X_BYPASS_MASK, 0);
		return;
	}

	imx6_pm_common_init(&imx6sl_pm_data);
}

void __init imx6sx_pm_init(void)
{
	struct device_node *np;
	struct resource res;

	if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
		imx6_pm_common_init(&imx6sx_lpddr2_pm_data);
	else
		imx6_pm_common_init(&imx6sx_pm_data);
	if (imx_get_soc_revision() < IMX_CHIP_REVISION_1_2) {
	/*
	 * As there is a 16K OCRAM(start from 0x8f8000)
	 * dedicated for low power function on i.MX6SX,
	 * but ROM did NOT do the ocram address change
	 * accordingly, so we need to add a data patch
	 * to workaround this issue, otherwise, system
	 * will fail to resume from DSM mode. TO1.2 fixes
	 * this issue.
	 */
		romcp = syscon_regmap_lookup_by_compatible(
			"fsl,imx6sx-romcp");
		if (IS_ERR(romcp)) {
			pr_err("failed to find fsl,imx6sx-romcp regmap\n");
			return;
		}
		regmap_write(romcp, ROMC_ROMPATCH0D, iram_tlb_phys_addr);
		regmap_update_bits(romcp, ROMC_ROMPATCHCNTL,
			BM_ROMPATCHCNTL_0D, BM_ROMPATCHCNTL_0D);
		regmap_update_bits(romcp, ROMC_ROMPATCHENL,
			BM_ROMPATCHENL_0D, BM_ROMPATCHENL_0D);
		regmap_write(romcp, ROMC_ROMPATCH0A,
			ROM_ADDR_FOR_INTERNAL_RAM_BASE);
		regmap_update_bits(romcp, ROMC_ROMPATCHCNTL,
			BM_ROMPATCHCNTL_DIS, ~BM_ROMPATCHCNTL_DIS);
	}

	np = of_find_compatible_node(NULL, NULL, "fsl,mega-fast-sram");
	ocram_base = of_iomap(np, 0);
	WARN_ON(!ocram_base);
	WARN_ON(of_address_to_resource(np, 0, &res));
	ocram_size = resource_size(&res);
	ocram_saved_in_ddr = kzalloc(ocram_size, GFP_KERNEL);
	WARN_ON(!ocram_saved_in_ddr);

	np = of_find_node_by_path(
		"/soc/aips-bus@02000000/spba-bus@02000000/serial@02020000");
	if (np)
		console_base = of_iomap(np, 0);
	if (imx_src_is_m4_enabled()) {
		np = of_find_compatible_node(NULL, NULL,
				"fsl,imx6sx-qspi-m4-restore");
		if (np)
			qspi_base = of_iomap(np, 0);
		WARN_ON(!qspi_base);
	}
}

void __init imx6ul_pm_init(void)
{
	struct device_node *np;

	if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
		imx6_pm_common_init(&imx6ul_lpddr2_pm_data);
	else
		imx6_pm_common_init(&imx6ul_pm_data);

	if (cpu_is_imx6ull()) {
		np = of_find_node_by_path(
			"/soc/aips-bus@02000000/spba-bus@02000000/serial@02020000");
		if (np)
			console_base = of_iomap(np, 0);
	}
}