blob: 2ef1806bbc35050b646105b33da32060d7eda292 [file] [log] [blame]
/*
* Copyright (C) 2011-2016 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2017 NXP.
*/
/*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/*!
* @file busfreq_lpddr2.c
*
* @brief iMX6 LPDDR2 frequency change specific file.
*
* @ingroup PM
*/
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/tlb.h>
#include <linux/busfreq-imx.h>
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/cpumask.h>
#include <linux/delay.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/slab.h>
#include "common.h"
#include "hardware.h"
static struct device *busfreq_dev;
static int curr_ddr_rate;
static DEFINE_SPINLOCK(freq_lock);
void (*mx6_change_lpddr2_freq)(u32 ddr_freq, int bus_freq_mode) = NULL;
extern unsigned int ddr_normal_rate;
extern void mx6_lpddr2_freq_change(u32 freq, int bus_freq_mode);
extern void imx6_up_lpddr2_freq_change(u32 freq, int bus_freq_mode);
extern void imx6sll_lpddr2_freq_change(u32 freq, int bus_freq_mode);
extern unsigned long save_ttbr1(void);
extern void restore_ttbr1(unsigned long ttbr1);
extern void mx6q_lpddr2_freq_change(u32 freq, void *ddr_settings);
extern unsigned long ddr_freq_change_iram_base;
extern unsigned long imx6_lpddr2_freq_change_start asm("imx6_lpddr2_freq_change_start");
extern unsigned long imx6_lpddr2_freq_change_end asm("imx6_lpddr2_freq_change_end");
extern unsigned long mx6q_lpddr2_freq_change_start asm("mx6q_lpddr2_freq_change_start");
extern unsigned long mx6q_lpddr2_freq_change_end asm("mx6q_lpddr2_freq_change_end");
extern unsigned long iram_tlb_phys_addr;
struct mmdc_settings_info {
u32 size;
void *settings;
int freq;
} __aligned(8);
static struct mmdc_settings_info *mmdc_settings_info;
void (*mx6_change_lpddr2_freq_smp)(u32 ddr_freq, struct mmdc_settings_info
*mmdc_settings_info) = NULL;
static int mmdc_settings_size;
static unsigned long (*mmdc_settings)[2];
static unsigned long (*iram_mmdc_settings)[2];
static unsigned long *iram_settings_size;
static unsigned long *iram_ddr_freq_chage;
unsigned long mmdc_timing_settings[][2] = {
{0x0C, 0x0}, /* mmdc_mdcfg0 */
{0x10, 0x0}, /* mmdc_mdcfg1 */
{0x14, 0x0}, /* mmdc_mdcfg2 */
{0x18, 0x0}, /* mmdc_mdmisc */
{0x38, 0x0}, /* mmdc_mdcfg3lp */
};
#ifdef CONFIG_SMP
volatile u32 *wait_for_lpddr2_freq_update;
static unsigned int online_cpus;
static u32 *irqs_used;
void (*wfe_change_lpddr2_freq)(u32 cpuid, u32 *ddr_freq_change_done);
extern void wfe_smp_freq_change(u32 cpuid, u32 *ddr_freq_change_done);
extern unsigned long wfe_smp_freq_change_start asm("wfe_smp_freq_change_start");
extern unsigned long wfe_smp_freq_change_end asm("wfe_smp_freq_change_end");
extern void __iomem *imx_scu_base;
static void __iomem *gic_dist_base;
#endif
#ifdef CONFIG_SMP
static irqreturn_t wait_in_wfe_irq(int irq, void *dev_id)
{
u32 me;
me = smp_processor_id();
#ifdef CONFIG_LOCAL_TIMERS
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &me);
#endif
wfe_change_lpddr2_freq(0xff << (me * 8),
(u32 *)ddr_freq_change_iram_base);
#ifdef CONFIG_LOCAL_TIMERS
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &me);
#endif
return IRQ_HANDLED;
}
#endif
/* change the DDR frequency. */
int update_lpddr2_freq(int ddr_rate)
{
unsigned long ttbr1, flags;
int mode = get_bus_freq_mode();
if (ddr_rate == curr_ddr_rate)
return 0;
printk(KERN_DEBUG "\nBus freq set to %d start...\n", ddr_rate);
spin_lock_irqsave(&freq_lock, flags);
/*
* Flush the TLB, to ensure no TLB maintenance occurs
* when DDR is in self-refresh.
*/
ttbr1 = save_ttbr1();
/* Now change DDR frequency. */
if (cpu_is_imx6sl())
mx6_change_lpddr2_freq(ddr_rate,
(mode == BUS_FREQ_LOW || mode == BUS_FREQ_ULTRA_LOW) ? 1 : 0);
else
mx6_change_lpddr2_freq(ddr_rate,
(mode == BUS_FREQ_LOW || mode == BUS_FREQ_AUDIO) ? 1 : 0);
restore_ttbr1(ttbr1);
curr_ddr_rate = ddr_rate;
spin_unlock_irqrestore(&freq_lock, flags);
printk(KERN_DEBUG "\nBus freq set to %d done...\n", ddr_rate);
return 0;
}
int init_mmdc_lpddr2_settings(struct platform_device *busfreq_pdev)
{
unsigned long ddr_code_size;
busfreq_dev = &busfreq_pdev->dev;
ddr_code_size = SZ_4K;
if (cpu_is_imx6sl())
mx6_change_lpddr2_freq = (void *)fncpy(
(void *)ddr_freq_change_iram_base,
&mx6_lpddr2_freq_change, ddr_code_size);
if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull())
mx6_change_lpddr2_freq = (void *)fncpy(
(void *)ddr_freq_change_iram_base,
&imx6_up_lpddr2_freq_change, ddr_code_size);
if (cpu_is_imx6sll())
mx6_change_lpddr2_freq = (void *)fncpy(
(void *)ddr_freq_change_iram_base,
&imx6sll_lpddr2_freq_change, ddr_code_size);
curr_ddr_rate = ddr_normal_rate;
return 0;
}
int update_lpddr2_freq_smp(int ddr_rate)
{
unsigned long ttbr1;
int i, me = 0;
#ifdef CONFIG_SMP
int cpu = 0;
u32 reg = 0;
#endif
if (ddr_rate == curr_ddr_rate)
return 0;
printk(KERN_DEBUG "Bus freq set to %d start...\n", ddr_rate);
for (i=0; i < mmdc_settings_size; i++) {
iram_mmdc_settings[i][0] = mmdc_settings[i][0];
iram_mmdc_settings[i][1] = mmdc_settings[i][1];
}
mmdc_settings_info->size = mmdc_settings_size;
mmdc_settings_info->settings = iram_mmdc_settings;
mmdc_settings_info->freq = curr_ddr_rate;
/* ensure that all Cores are in WFE. */
local_irq_disable();
#ifdef CONFIG_SMP
me = smp_processor_id();
/* Make sure all the online cores are active */
while (1) {
bool not_exited_busfreq = false;
for_each_online_cpu(cpu) {
reg = __raw_readl(imx_scu_base + 0x08);
if (reg & (0x02 << (cpu * 8)))
not_exited_busfreq = true;
}
if (!not_exited_busfreq)
break;
}
wmb();
*wait_for_lpddr2_freq_update = 1;
dsb();
online_cpus = readl_relaxed(imx_scu_base + 0x08);
for_each_online_cpu(cpu) {
*((char *)(&online_cpus) + (u8)cpu) = 0x02;
if (cpu != me) {
reg = 1 << (irqs_used[cpu] % 32);
writel_relaxed(reg, gic_dist_base + GIC_DIST_PENDING_SET
+ (irqs_used[cpu] / 32) * 4);
}
}
/* Wait for the other active CPUs to idle */
while (1) {
reg = 0;
reg = readl_relaxed(imx_scu_base + 0x08);
reg |= (0x02 << (me * 8));
if (reg == online_cpus)
break;
}
#endif
/* Ensure iram_tlb_phys_addr is flushed to DDR. */
__cpuc_flush_dcache_area(&iram_tlb_phys_addr,
sizeof(iram_tlb_phys_addr));
outer_clean_range(__pa(&iram_tlb_phys_addr),
__pa(&iram_tlb_phys_addr + 1));
/*
* Flush the TLB, to ensure no TLB maintenance occurs
* when DDR is in self-refresh.
*/
ttbr1 = save_ttbr1();
curr_ddr_rate = ddr_rate;
/* Now change DDR frequency. */
mx6_change_lpddr2_freq_smp(ddr_rate, mmdc_settings_info);
restore_ttbr1(ttbr1);
#ifdef CONFIG_SMP
wmb();
/* DDR frequency change is done . */
*wait_for_lpddr2_freq_update = 0;
dsb();
/* wake up all the cores. */
sev();
#endif
local_irq_enable();
printk(KERN_DEBUG "Bus freq set to %d done! cpu=%d\n", ddr_rate, me);
return 0;
}
int init_mmdc_lpddr2_settings_mx6q(struct platform_device *busfreq_pdev)
{
struct device *dev = &busfreq_pdev->dev;
unsigned long ddr_code_size = 0;
unsigned long wfe_code_size = 0;
struct device_node *node;
void __iomem *mmdc_base;
int i;
#ifdef CONFIG_SMP
struct irq_data *d;
u32 cpu;
int err;
#endif
node = of_find_compatible_node(NULL, NULL, "fsl,imx6q-mmdc");
if (!node) {
printk(KERN_ERR "failed to find mmdc device tree data!\n");
return -EINVAL;
}
mmdc_base = of_iomap(node, 0);
if (!mmdc_base) {
dev_err(dev, "unable to map mmdc registers\n");
return -EINVAL;
}
mmdc_settings_size = ARRAY_SIZE(mmdc_timing_settings);
mmdc_settings = kmalloc((mmdc_settings_size * 8), GFP_KERNEL);
memcpy(mmdc_settings, mmdc_timing_settings,
sizeof(mmdc_timing_settings));
#ifdef CONFIG_SMP
node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
if (!node) {
printk(KERN_ERR "failed to find imx6q-a9-gic device tree data!\n");
return -EINVAL;
}
gic_dist_base = of_iomap(node, 0);
WARN(!gic_dist_base, "unable to map gic dist registers\n");
irqs_used = devm_kzalloc(dev, sizeof(u32) * num_present_cpus(),
GFP_KERNEL);
for_each_online_cpu(cpu) {
int irq = platform_get_irq(busfreq_pdev, cpu);
err = request_irq(irq, wait_in_wfe_irq, IRQF_PERCPU,
"mmdc_1", NULL);
if (err) {
dev_err(dev,
"Busfreq:request_irq failed %d, err = %d\n",
irq, err);
return err;
}
err = irq_set_affinity(irq, cpumask_of(cpu));
if (err) {
dev_err(dev,
"Busfreq: Cannot set irq affinity irq=%d,\n",
irq);
return err;
}
d = irq_get_irq_data(irq);
irqs_used[cpu] = d->hwirq + 32;
}
/* Stoange_iram_basee the variable used to communicate between cores in
* a non-cacheable IRAM area */
wait_for_lpddr2_freq_update = (u32 *)ddr_freq_change_iram_base;
wfe_code_size = (&wfe_smp_freq_change_end - &wfe_smp_freq_change_start) *4;
wfe_change_lpddr2_freq = (void *)fncpy((void *)ddr_freq_change_iram_base + 0x8,
&wfe_smp_freq_change, wfe_code_size);
#endif
iram_settings_size = (void *)ddr_freq_change_iram_base + wfe_code_size + 0x8;
iram_mmdc_settings = (void *)iram_settings_size + sizeof(*mmdc_settings_info);
iram_ddr_freq_chage = (void *)iram_mmdc_settings + (mmdc_settings_size * 8) + 0x8;
mmdc_settings_info = (struct mmdc_settings_info *)iram_settings_size;
ddr_code_size = (&mx6q_lpddr2_freq_change_end -&mx6q_lpddr2_freq_change_start) *4;
mx6_change_lpddr2_freq_smp = (void *)fncpy(iram_ddr_freq_chage,
&mx6q_lpddr2_freq_change, ddr_code_size);
/* save initial mmdc boot timing settings */
for (i=0; i < mmdc_settings_size; i++)
mmdc_settings[i][1] = readl_relaxed(mmdc_base +
mmdc_settings[i][0]);
curr_ddr_rate = ddr_normal_rate;
return 0;
}