/*
 * Copyright (C) 2011-2016 Freescale Semiconductor, Inc. All Rights Reserved.
 * Copyright 2017 NXP.
 * Copyright 2018 NXP.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.

 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/io.h>
#include <asm/mach/map.h>
#include <asm/mach-types.h>
#include <asm/tlb.h>
#include <linux/busfreq-imx.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
#include <linux/reboot.h>
#include <linux/regulator/consumer.h>
#include <linux/sched.h>
#include <linux/suspend.h>
#include "hardware.h"
#include "common.h"

#define LPAPM_CLK		24000000
#define LOW_AUDIO_CLK		50000000
#define HIGH_AUDIO_CLK		100000000

#define LOW_POWER_RUN_VOLTAGE	950000

#define MMDC_MDMISC_DDR_TYPE_DDR3	0
#define MMDC_MDMISC_DDR_TYPE_LPDDR2	1

unsigned int ddr_med_rate;
unsigned int ddr_normal_rate;
unsigned long ddr_freq_change_total_size;
unsigned long ddr_freq_change_iram_base;
unsigned long ddr_freq_change_iram_phys;

static int ddr_type;
static int low_bus_freq_mode;
static int audio_bus_freq_mode;
static int ultra_low_bus_freq_mode;
static int high_bus_freq_mode;
static int med_bus_freq_mode;
static int bus_freq_scaling_initialized;
static bool cancel_reduce_bus_freq;
static struct device *busfreq_dev;
static int busfreq_suspended;
static int bus_freq_scaling_is_active;
static int high_bus_count, med_bus_count, audio_bus_count, low_bus_count;
static unsigned int ddr_low_rate;
static int cur_bus_freq_mode;
static u32 org_arm_rate;
static int origin_arm_volt, origin_soc_volt;

extern unsigned long iram_tlb_phys_addr;
extern int unsigned long iram_tlb_base_addr;

/*
 * Bus frequency management by Linux
 */
extern int init_mmdc_lpddr2_settings(struct platform_device *dev);
extern int init_mmdc_lpddr2_settings_mx6q(struct platform_device *dev);
extern int init_mmdc_ddr3_settings_imx6_up(struct platform_device *dev);
extern int init_mmdc_ddr3_settings_imx6_smp(struct platform_device *dev);
extern int init_ddrc_ddr_settings(struct platform_device *dev);
extern int update_ddr_freq_imx_smp(int ddr_rate);
extern int update_ddr_freq_imx6_up(int ddr_rate);
extern int update_lpddr2_freq(int ddr_rate);
extern int update_lpddr2_freq_smp(int ddr_rate);

#ifdef CONFIG_OPTEE
/*
 * Bus frequency management by OPTEE OS
 */
extern int update_freq_optee(int ddr_rate);
extern int init_freq_optee(struct platform_device *busfreq_pdev);
#endif

/**
 * @brief  Functions to init and update the busfreq function of
 *         device and memory type
 */
static struct busfreq_func {
	int (*init)(struct platform_device *dev);
	int (*update)(int ddr_rate);
} busfreq_func = {NULL, NULL};

DEFINE_MUTEX(bus_freq_mutex);

static struct clk *osc_clk;
static struct clk *ahb_clk;
static struct clk *axi_sel_clk;
static struct clk *dram_root;
static struct clk *dram_alt_sel;
static struct clk *dram_alt_root;
static struct clk *pfd0_392m;
static struct clk *pfd2_270m;
static struct clk *pfd1_332m;
static struct clk *pll_dram;
static struct clk *ahb_sel_clk;
static struct clk *axi_clk;

static struct clk *m4_clk;
static struct clk *arm_clk;
static struct clk *pll3_clk;
static struct clk *step_clk;
static struct clk *mmdc_clk;
static struct clk *ocram_clk;
static struct clk *pll1_clk;
static struct clk *pll1_bypass_clk;
static struct clk *pll1_bypass_src_clk;
static struct clk *pll1_sys_clk;
static struct clk *pll1_sw_clk;
static struct clk *pll2_bypass_src_clk;
static struct clk *pll2_bypass_clk;
static struct clk *pll2_clk;
static struct clk *pll2_400_clk;
static struct clk *pll2_200_clk;
static struct clk *pll2_bus_clk;
static struct clk *periph_clk;
static struct clk *periph_pre_clk;
static struct clk *periph_clk2_clk;
static struct clk *periph_clk2_sel_clk;
static struct clk *periph2_clk;
static struct clk *periph2_pre_clk;
static struct clk *periph2_clk2_clk;
static struct clk *periph2_clk2_sel_clk;
static struct clk *axi_alt_sel_clk;
static struct clk *pll3_pfd1_540m_clk;

static struct delayed_work low_bus_freq_handler;
static struct delayed_work bus_freq_daemon;

static RAW_NOTIFIER_HEAD(busfreq_notifier_chain);

static bool check_m4_sleep(void)
{
	unsigned long timeout = jiffies + msecs_to_jiffies(500);

	while (imx_gpc_is_m4_sleeping() == 0)
		if (time_after(jiffies, timeout))
			return false;
	return  true;
}

static bool busfreq_notified_low = false;

static int busfreq_notify(enum busfreq_event event)
{
	int ret;

	if (event == LOW_BUSFREQ_ENTER) {
		WARN_ON(busfreq_notified_low);
		busfreq_notified_low = true;
	} else if (event == LOW_BUSFREQ_EXIT) {
		WARN_ON(!busfreq_notified_low);
		busfreq_notified_low = false;
	}
	ret = raw_notifier_call_chain(&busfreq_notifier_chain, event, NULL);

	return notifier_to_errno(ret);
}

int register_busfreq_notifier(struct notifier_block *nb)
{
	return raw_notifier_chain_register(&busfreq_notifier_chain, nb);
}
EXPORT_SYMBOL(register_busfreq_notifier);

int unregister_busfreq_notifier(struct notifier_block *nb)
{
	return raw_notifier_chain_unregister(&busfreq_notifier_chain, nb);
}
EXPORT_SYMBOL(unregister_busfreq_notifier);

static struct clk *origin_step_parent;

/*
 * on i.MX6ULL, when entering low bus mode, the ARM core
 * can run at 24MHz to support the low power run mode per
 * to design team.
 */
static void imx6ull_lower_cpu_rate(bool enter)
{
	int ret;

	if (enter) {
		org_arm_rate = clk_get_rate(arm_clk);
		origin_arm_volt = regulator_get_voltage(arm_reg);
		origin_soc_volt = regulator_get_voltage(soc_reg);
	}

	clk_set_parent(pll1_bypass_clk, pll1_bypass_src_clk);
	clk_set_parent(pll1_sw_clk, pll1_sys_clk);

	if (enter) {
		origin_step_parent = clk_get_parent(step_clk);
		clk_set_parent(step_clk, osc_clk);
		clk_set_parent(pll1_sw_clk, step_clk);
		clk_set_rate(arm_clk, LPAPM_CLK);
		if (cpu_is_imx6sll() && uart_from_osc) {
			ret = regulator_set_voltage_tol(arm_reg, LOW_POWER_RUN_VOLTAGE, 0);
			if (ret)
				pr_err("set arm reg voltage failed\n");
			ret = regulator_set_voltage_tol(soc_reg, LOW_POWER_RUN_VOLTAGE, 0);
			if (ret)
				pr_err("set soc reg voltage failed\n");
		}
	} else {
		if (uart_from_osc) {
			ret = regulator_set_voltage_tol(soc_reg, origin_soc_volt, 0);
			if (ret)
				pr_err("set soc reg voltage failed\n");
			ret = regulator_set_voltage_tol(arm_reg, origin_arm_volt, 0);
			if (ret)
				pr_err("set arm reg voltage failed\n");
		}
		clk_set_parent(step_clk, origin_step_parent);
		clk_set_parent(pll1_sw_clk, step_clk);
		clk_set_rate(arm_clk, org_arm_rate);
		clk_set_parent(pll1_bypass_clk, pll1_clk);
	}
}

/*
 * enter_lpm_imx6_up and exit_lpm_imx6_up is used by
 * i.MX6SX/i.MX6UL for entering and exiting lpm mode.
 */
static void enter_lpm_imx6_up(void)
{
	if (cpu_is_imx6sx() && imx_src_is_m4_enabled())
		if (!check_m4_sleep())
			pr_err("M4 is NOT in sleep!!!\n");

	/* set periph_clk2 to source from OSC for periph */
	clk_set_parent(periph_clk2_sel_clk, osc_clk);
	clk_set_parent(periph_clk, periph_clk2_clk);
	/* set ahb/ocram to 24MHz */
	clk_set_rate(ahb_clk, LPAPM_CLK);
	clk_set_rate(ocram_clk, LPAPM_CLK);

	if (audio_bus_count) {
		/* Need to ensure that PLL2_PFD_400M is kept ON. */
		clk_prepare_enable(pll2_400_clk);
		if (ddr_type == IMX_DDR_TYPE_DDR3)
			busfreq_func.update(LOW_AUDIO_CLK);
		else if (ddr_type == IMX_DDR_TYPE_LPDDR2 ||
			 ddr_type == IMX_MMDC_DDR_TYPE_LPDDR3)
			busfreq_func.update(HIGH_AUDIO_CLK);
		clk_set_parent(periph2_clk2_sel_clk, pll3_clk);
		clk_set_parent(periph2_pre_clk, pll2_400_clk);
		clk_set_parent(periph2_clk, periph2_pre_clk);
		/*
		 * As periph2_clk's parent is not changed from
		 * high mode to audio mode, so clk framework
		 * will not update its children's freq, but we
		 * change the mmdc's podf in asm code, so here
		 * need to update mmdc rate to make sure clk
		 * tree is right, although it will not do any
		 * change to hardware.
		 */
		if (high_bus_freq_mode) {
			if (ddr_type == IMX_DDR_TYPE_DDR3)
				clk_set_rate(mmdc_clk, LOW_AUDIO_CLK);
			else if (ddr_type == IMX_DDR_TYPE_LPDDR2 ||
				 ddr_type == IMX_MMDC_DDR_TYPE_LPDDR3)
				clk_set_rate(mmdc_clk, HIGH_AUDIO_CLK);
		}

		if ((cpu_is_imx6ull() || cpu_is_imx6sll()) && low_bus_freq_mode)
			imx6ull_lower_cpu_rate(false);

		audio_bus_freq_mode = 1;
		low_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_AUDIO;
	} else {
		busfreq_func.update(LPAPM_CLK);

		clk_set_parent(periph2_clk2_sel_clk, osc_clk);
		clk_set_parent(periph2_clk, periph2_clk2_clk);

		if (audio_bus_freq_mode)
			clk_disable_unprepare(pll2_400_clk);

		if (cpu_is_imx6ull() || cpu_is_imx6sll())
			imx6ull_lower_cpu_rate(true);

		low_bus_freq_mode = 1;
		audio_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_LOW;
	}
}

static void enter_lpm_imx6_smp(void)
{
	if (cpu_is_imx6dl())
		/* Set axi to periph_clk */
		clk_set_parent(axi_sel_clk, periph_clk);

	if (audio_bus_count) {
		/* Need to ensure that PLL2_PFD_400M is kept ON. */
		clk_prepare_enable(pll2_400_clk);
		if (ddr_type == MMDC_MDMISC_DDR_TYPE_DDR3)
			busfreq_func.update(LOW_AUDIO_CLK);
		else if (ddr_type == MMDC_MDMISC_DDR_TYPE_LPDDR2)
			busfreq_func.update(HIGH_AUDIO_CLK);
		/* Make sure periph clk's parent also got updated */
		clk_set_parent(periph_clk2_sel_clk, pll3_clk);
		if (ddr_type == MMDC_MDMISC_DDR_TYPE_DDR3)
			clk_set_parent(periph_pre_clk, pll2_200_clk);
		else if (ddr_type == MMDC_MDMISC_DDR_TYPE_LPDDR2)
			clk_set_parent(periph_pre_clk, pll2_400_clk);
		clk_set_parent(periph_clk, periph_pre_clk);

		/*
		 * As periph_pre_clk's parent is not changed from
		 * high mode to audio mode on lpddr2, the clk framework
		 * will not update its children's freq, but we
		 * change the mmdc_ch0_axi podf in asm code, so here
		 * need to update mmdc rate to make sure clk
		 * tree is right, although it will not do any
		 * change to hardware. Calling get_rate will only call
		 * the .rate_recalc which is all we need.
		 */
		if (high_bus_freq_mode && mmdc_clk)
			if (ddr_type == IMX_DDR_TYPE_LPDDR2)
				clk_get_rate(mmdc_clk);

		audio_bus_freq_mode = 1;
		low_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_AUDIO;
	} else {
		busfreq_func.update(LPAPM_CLK);

		/* Make sure periph clk's parent also got updated */
		clk_set_parent(periph_clk2_sel_clk, osc_clk);
		/* Set periph_clk parent to OSC via periph_clk2_sel */
		clk_set_parent(periph_clk, periph_clk2_clk);
		if (audio_bus_freq_mode)
			clk_disable_unprepare(pll2_400_clk);
		low_bus_freq_mode = 1;
		audio_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_LOW;
	}
}

static void exit_lpm_imx6_up(void)
{
	if ((cpu_is_imx6ull() || cpu_is_imx6sll()) && low_bus_freq_mode)
		imx6ull_lower_cpu_rate(false);

	clk_prepare_enable(pll2_400_clk);

	/*
	 * lower ahb/ocram's freq first to avoid too high
	 * freq during parent switch from OSC to pll3.
	 */
	if (cpu_is_imx6ul() || cpu_is_imx6ull() || cpu_is_imx6sll())
		clk_set_rate(ahb_clk, LPAPM_CLK / 4);
	else
		clk_set_rate(ahb_clk, LPAPM_CLK / 3);

	clk_set_rate(ocram_clk, LPAPM_CLK / 2);
	/* set periph clk to from pll2_bus on i.MX6UL */
	if (cpu_is_imx6ul() || cpu_is_imx6ull() || cpu_is_imx6sll())
		clk_set_parent(periph_pre_clk, pll2_bus_clk);
	/* set periph clk to from pll2_400 */
	else
		clk_set_parent(periph_pre_clk, pll2_400_clk);
	clk_set_parent(periph_clk, periph_pre_clk);
	/* set periph_clk2 to pll3 */
	clk_set_parent(periph_clk2_sel_clk, pll3_clk);

	busfreq_func.update(ddr_normal_rate);

	/* correct parent info after ddr freq change in asm code */
	clk_set_parent(periph2_pre_clk, pll2_400_clk);
	clk_set_parent(periph2_clk, periph2_pre_clk);
	clk_set_parent(periph2_clk2_sel_clk, pll3_clk);

	/*
	 * As periph2_clk's parent is not changed from
	 * audio mode to high mode, so clk framework
	 * will not update its children's freq, but we
	 * change the mmdc's podf in asm code, so here
	 * need to update mmdc rate to make sure clk
	 * tree is right, although it will not do any
	 * change to hardware.
	 */
	if (audio_bus_freq_mode)
		clk_set_rate(mmdc_clk, ddr_normal_rate);

	clk_disable_unprepare(pll2_400_clk);

	if (audio_bus_freq_mode)
		clk_disable_unprepare(pll2_400_clk);
}

static void exit_lpm_imx6_smp(void)
{
	struct clk *periph_clk_parent;

	if (cpu_is_imx6q() && ddr_type == MMDC_MDMISC_DDR_TYPE_DDR3)
		periph_clk_parent = pll2_bus_clk;
	else
		periph_clk_parent = pll2_400_clk;

	clk_prepare_enable(pll2_400_clk);

	busfreq_func.update(ddr_normal_rate);

	/* Make sure periph clk's parent also got updated */
	clk_set_parent(periph_clk2_sel_clk, pll3_clk);
	clk_set_parent(periph_pre_clk, periph_clk_parent);
	clk_set_parent(periph_clk, periph_pre_clk);
	if (cpu_is_imx6dl()) {
		/* Set axi to pll3_pfd1_540m */
		clk_set_parent(axi_alt_sel_clk, pll3_pfd1_540m_clk);
		clk_set_parent(axi_sel_clk, axi_alt_sel_clk);
	}
	/*
	 * As periph_pre_clk's parent is not changed from
	 * high mode to audio mode on lpddr2, the clk framework
	 * will not update its children's freq, but we
	 * change the mmdc_ch0_axi podf in asm code, so here
	 * need to update mmdc rate to make sure clk
	 * tree is right, although it will not do any
	 * change to hardware. Calling get_rate will only call
	 * the .rate_recalc which is all we need.
	 */
	if (audio_bus_freq_mode && mmdc_clk)
		if (ddr_type == IMX_DDR_TYPE_LPDDR2)
			clk_get_rate(mmdc_clk);

	clk_disable_unprepare(pll2_400_clk);
	if (audio_bus_freq_mode)
		clk_disable_unprepare(pll2_400_clk);
}

static void enter_lpm_imx6sl(void)
{
	if (high_bus_freq_mode) {
		/* Set periph_clk to be sourced from OSC_CLK */
		clk_set_parent(periph_clk2_sel_clk, osc_clk);
		clk_set_parent(periph_clk, periph_clk2_clk);
		/* Ensure AHB/AXI clks are at 24MHz. */
		clk_set_rate(ahb_clk, LPAPM_CLK);
		clk_set_rate(ocram_clk, LPAPM_CLK);
	}
	if (audio_bus_count) {
		/* Set AHB to 8MHz to lower pwer.*/
		clk_set_rate(ahb_clk, LPAPM_CLK / 3);

		/* Set up DDR to 100MHz. */
		busfreq_func.update(HIGH_AUDIO_CLK);

		/* Fix the clock tree in kernel */
		clk_set_parent(periph2_pre_clk, pll2_200_clk);
		clk_set_parent(periph2_clk, periph2_pre_clk);

		if (low_bus_freq_mode || ultra_low_bus_freq_mode) {
			/*
			 * Fix the clock tree in kernel, make sure
			 * pll2_bypass is updated as it is
			 * sourced from PLL2.
			 */
			clk_set_parent(pll2_bypass_clk, pll2_clk);
			/*
			 * Swtich ARM to run off PLL2_PFD2_400MHz
			 * since DDR is anyway at 100MHz.
			 */
			clk_set_parent(step_clk, pll2_400_clk);
			clk_set_parent(pll1_sw_clk, step_clk);

			/*
			 * Need to ensure that PLL1 is bypassed and enabled
			 * before ARM-PODF is set.
			 */
			clk_set_parent(pll1_bypass_clk, pll1_bypass_src_clk);

			/*
			 * Ensure that the clock will be
			 * at original speed.
			 */
			clk_set_rate(arm_clk, org_arm_rate);
		}
		low_bus_freq_mode = 0;
		ultra_low_bus_freq_mode = 0;
		audio_bus_freq_mode = 1;
		cur_bus_freq_mode = BUS_FREQ_AUDIO;
	} else {
		u32 arm_div, pll1_rate;
		org_arm_rate = clk_get_rate(arm_clk);
		if (org_arm_rate == 0) {
			WARN_ON(1);
			return;
		}
		if (low_bus_freq_mode && low_bus_count == 0) {
			/*
			 * We are already in DDR @ 24MHz state, but
			 * no one but ARM needs the DDR. In this case,
			 * we can lower the DDR freq to 1MHz when ARM
			 * enters WFI in this state. Keep track of this state.
			 */
			ultra_low_bus_freq_mode = 1;
			low_bus_freq_mode = 0;
			audio_bus_freq_mode = 0;
			cur_bus_freq_mode = BUS_FREQ_ULTRA_LOW;
		} else {
			if (!ultra_low_bus_freq_mode && !low_bus_freq_mode) {
				/*
				 * Anyway, make sure the AHB is running at 24MHz
				 * in low_bus_freq_mode.
				 */
				if (audio_bus_freq_mode)
					clk_set_rate(ahb_clk, LPAPM_CLK);
				/*
				 * Set DDR to 24MHz.
				 * Since we are going to bypass PLL2,
				 * we need to move ARM clk off PLL2_PFD2
				 * to PLL1. Make sure the PLL1 is running
				 * at the lowest possible freq.
				 * To work well with CPUFREQ we want to ensure that
				 * the CPU freq does not change, so attempt to
				 * get a freq as close to 396MHz as possible.
				 */
				clk_set_rate(pll1_clk,
					clk_round_rate(pll1_clk, (org_arm_rate * 2)));
				pll1_rate = clk_get_rate(pll1_clk);
				arm_div = pll1_rate / org_arm_rate;
				if (pll1_rate / arm_div > org_arm_rate)
					arm_div++;
				/*
				  * Need to ensure that PLL1 is bypassed and enabled
				  * before ARM-PODF is set.
				  */
				clk_set_parent(pll1_bypass_clk, pll1_clk);
				/*
				 * Ensure ARM CLK is lower before
				 * changing the parent.
				 */
				clk_set_rate(arm_clk, org_arm_rate / arm_div);
				/* Now set the ARM clk parent to PLL1_SYS. */
				clk_set_parent(pll1_sw_clk, pll1_sys_clk);

				/*
				 * Set STEP_CLK back to OSC to save power and
				 * also to maintain the parent.The WFI iram code
				 * will switch step_clk to osc, but the clock API
				 * is not aware of the change and when a new request
				 * to change the step_clk parent to pll2_pfd2_400M
				 * is requested sometime later, the change is ignored.
				 */
				clk_set_parent(step_clk, osc_clk);

				/* Now set DDR to 24MHz. */
				busfreq_func.update(LPAPM_CLK);

				/*
				 * Fix the clock tree in kernel.
				 * Make sure PLL2 rate is updated as it gets
				 * bypassed in the DDR freq change code.
				 */
				clk_set_parent(pll2_bypass_clk, pll2_bypass_src_clk);
				clk_set_parent(periph2_clk2_sel_clk, pll2_bus_clk);
				clk_set_parent(periph2_clk, periph2_clk2_clk);
			}
			if (low_bus_count == 0) {
				ultra_low_bus_freq_mode = 1;
				low_bus_freq_mode = 0;
				cur_bus_freq_mode = BUS_FREQ_ULTRA_LOW;
			} else {
				ultra_low_bus_freq_mode = 0;
				low_bus_freq_mode = 1;
				cur_bus_freq_mode = BUS_FREQ_LOW;
			}
			audio_bus_freq_mode = 0;
		}
	}
}

static void exit_lpm_imx6sl(void)
{
	/* Change DDR freq in IRAM. */
	busfreq_func.update(ddr_normal_rate);

	/*
	 * Fix the clock tree in kernel.
	 * Make sure PLL2 rate is updated as it gets
	 * un-bypassed in the DDR freq change code.
	 */
	clk_set_parent(pll2_bypass_clk, pll2_clk);
	clk_set_parent(periph2_pre_clk, pll2_400_clk);
	clk_set_parent(periph2_clk, periph2_pre_clk);

	/* Ensure that periph_clk is sourced from PLL2_400. */
	clk_set_parent(periph_pre_clk, pll2_400_clk);
	/*
	 * Before switching the perhiph_clk, ensure that the
	 * AHB/AXI will not be too fast.
	 */
	clk_set_rate(ahb_clk, LPAPM_CLK / 3);
	clk_set_rate(ocram_clk, LPAPM_CLK / 2);
	clk_set_parent(periph_clk, periph_pre_clk);

	if (low_bus_freq_mode || ultra_low_bus_freq_mode) {
		/* Move ARM from PLL1_SW_CLK to PLL2_400. */
		clk_set_parent(step_clk, pll2_400_clk);
		clk_set_parent(pll1_sw_clk, step_clk);
		/*
		  * Need to ensure that PLL1 is bypassed and enabled
		  * before ARM-PODF is set.
		  */
		clk_set_parent(pll1_bypass_clk, pll1_bypass_src_clk);
		clk_set_rate(arm_clk, org_arm_rate);
		ultra_low_bus_freq_mode = 0;
	}
}

static void enter_lpm_imx7d(void)
{
	/*
	 * The AHB clock parent switch and divider change
	 * needs to keep previous/current parent enabled
	 * per design requirement, but when we switch the
	 * clock parent, previous AHB clock parent may be
	 * disabled by common clock framework, so here we
	 * have to make sure AHB's previous parent pfd2_270m
	 * is enabled during AHB set rate.
	 */
	clk_prepare_enable(pfd2_270m);
	if (audio_bus_count) {
		clk_prepare_enable(pfd0_392m);
		busfreq_func.update(HIGH_AUDIO_CLK);

		clk_set_parent(dram_alt_sel, pfd0_392m);
		clk_set_parent(dram_root, dram_alt_root);
		if (high_bus_freq_mode) {
			clk_set_parent(axi_sel_clk, osc_clk);
			clk_set_parent(ahb_sel_clk, osc_clk);
			clk_set_rate(ahb_clk, LPAPM_CLK);
		}
		clk_disable_unprepare(pfd0_392m);
		audio_bus_freq_mode = 1;
		low_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_AUDIO;
	} else {
		busfreq_func.update(LPAPM_CLK);

		clk_set_parent(dram_alt_sel, osc_clk);
		clk_set_parent(dram_root, dram_alt_root);
		if (high_bus_freq_mode) {
			clk_set_parent(axi_sel_clk, osc_clk);
			clk_set_parent(ahb_sel_clk, osc_clk);
			clk_set_rate(ahb_clk, LPAPM_CLK);
		}
		low_bus_freq_mode = 1;
		audio_bus_freq_mode = 0;
		cur_bus_freq_mode = BUS_FREQ_LOW;
	}
	clk_disable_unprepare(pfd2_270m);
}

static void exit_lpm_imx7d(void)
{
	clk_set_parent(axi_sel_clk, pfd1_332m);
	clk_set_rate(ahb_clk, LPAPM_CLK / 2);
	clk_set_parent(ahb_sel_clk, pfd2_270m);

	busfreq_func.update(ddr_normal_rate);

	clk_set_parent(dram_root, pll_dram);
}

static void reduce_bus_freq(void)
{
	if (cpu_is_imx6())
		clk_prepare_enable(pll3_clk);

	if (audio_bus_count && (low_bus_freq_mode || ultra_low_bus_freq_mode))
		busfreq_notify(LOW_BUSFREQ_EXIT);
	else if (!audio_bus_count)
		busfreq_notify(LOW_BUSFREQ_ENTER);

	if (cpu_is_imx7d())
		enter_lpm_imx7d();
	else if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull() || cpu_is_imx6sll())
		enter_lpm_imx6_up();
	else if (cpu_is_imx6q() || cpu_is_imx6dl())
		enter_lpm_imx6_smp();
	else if (cpu_is_imx6sl())
		enter_lpm_imx6sl();

	med_bus_freq_mode = 0;
	high_bus_freq_mode = 0;

	if (cpu_is_imx6())
		clk_disable_unprepare(pll3_clk);

	if (audio_bus_freq_mode)
		dev_dbg(busfreq_dev,
			"Bus freq set to audio mode. Count: high %d, med %d, audio %d\n",
			high_bus_count, med_bus_count, audio_bus_count);
	if (low_bus_freq_mode)
		dev_dbg(busfreq_dev,
			"Bus freq set to low mode. Count: high %d, med %d, audio %d\n",
			high_bus_count, med_bus_count, audio_bus_count);
}

static inline void cancel_low_bus_freq_handler(void)
{
	cancel_delayed_work(&low_bus_freq_handler);
	cancel_reduce_bus_freq = true;
}

static void reduce_bus_freq_handler(struct work_struct *work)
{
	mutex_lock(&bus_freq_mutex);

	if (!cancel_reduce_bus_freq) {
		reduce_bus_freq();
		cancel_low_bus_freq_handler();
	}

	mutex_unlock(&bus_freq_mutex);
}

/*
 * Set the DDR, AHB to 24MHz.
 * This mode will be activated only when none of the modules that
 * need a higher DDR or AHB frequency are active.
 */
static int set_low_bus_freq(void)
{
	if (busfreq_suspended)
		return 0;

	if (!bus_freq_scaling_initialized || !bus_freq_scaling_is_active)
		return 0;

	cancel_reduce_bus_freq = false;

	/*
	 * Check to see if we need to got from
	 * low bus freq mode to audio bus freq mode.
	 * If so, the change needs to be done immediately.
	 */
	if (audio_bus_count && (low_bus_freq_mode || ultra_low_bus_freq_mode))
		reduce_bus_freq();
	else
		/*
		 * Don't lower the frequency immediately. Instead
		 * scheduled a delayed work and drop the freq if
		 * the conditions still remain the same.
		 */
		schedule_delayed_work(&low_bus_freq_handler,
					usecs_to_jiffies(3000000));
	return 0;
}

/*
 * Set the DDR to either 528MHz or 400MHz for iMX6qd
 * or 400MHz for iMX6dl.
 */
static int set_high_bus_freq(int high_bus_freq)
{
	if (bus_freq_scaling_initialized && bus_freq_scaling_is_active)
		cancel_low_bus_freq_handler();

	if (busfreq_suspended)
		return 0;

	if (!bus_freq_scaling_initialized || !bus_freq_scaling_is_active)
		return 0;

	if (high_bus_freq_mode)
		return 0;

	/* medium bus freq is only supported for MX6DQ */
	if (med_bus_freq_mode && !high_bus_freq)
		return 0;

	if (low_bus_freq_mode || ultra_low_bus_freq_mode)
		busfreq_notify(LOW_BUSFREQ_EXIT);

	if (cpu_is_imx6())
		clk_prepare_enable(pll3_clk);

	if (cpu_is_imx7d())
		exit_lpm_imx7d();
	else if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull() || cpu_is_imx6sll())
		exit_lpm_imx6_up();
	else if (cpu_is_imx6q() || cpu_is_imx6dl())
		exit_lpm_imx6_smp();
	else if (cpu_is_imx6sl())
		exit_lpm_imx6sl();

	high_bus_freq_mode = 1;
	med_bus_freq_mode = 0;
	low_bus_freq_mode = 0;
	audio_bus_freq_mode = 0;
	cur_bus_freq_mode = BUS_FREQ_HIGH;

	if (cpu_is_imx6())
		clk_disable_unprepare(pll3_clk);

	if (high_bus_freq_mode)
		dev_dbg(busfreq_dev,
			"Bus freq set to high mode. Count: high %d, med %d, audio %d\n",
			high_bus_count, med_bus_count, audio_bus_count);
	if (med_bus_freq_mode)
		dev_dbg(busfreq_dev,
			"Bus freq set to med mode. Count: high %d, med %d, audio %d\n",
			high_bus_count, med_bus_count, audio_bus_count);

	return 0;
}

void request_bus_freq(enum bus_freq_mode mode)
{
	mutex_lock(&bus_freq_mutex);

	if (mode == BUS_FREQ_ULTRA_LOW) {
		dev_dbg(busfreq_dev, "This mode cannot be requested!\n");
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if (mode == BUS_FREQ_HIGH)
		high_bus_count++;
	else if (mode == BUS_FREQ_MED)
		med_bus_count++;
	else if (mode == BUS_FREQ_AUDIO)
		audio_bus_count++;
	else if (mode == BUS_FREQ_LOW)
		low_bus_count++;

	if (busfreq_suspended || !bus_freq_scaling_initialized ||
		!bus_freq_scaling_is_active) {
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	cancel_low_bus_freq_handler();

	if ((mode == BUS_FREQ_HIGH) && (!high_bus_freq_mode)) {
		set_high_bus_freq(1);
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if ((mode == BUS_FREQ_MED) && (!high_bus_freq_mode) &&
		(!med_bus_freq_mode)) {
		set_high_bus_freq(0);
		mutex_unlock(&bus_freq_mutex);
		return;
	}
	if ((mode == BUS_FREQ_AUDIO) && (!high_bus_freq_mode) &&
		(!med_bus_freq_mode) && (!audio_bus_freq_mode)) {
		set_low_bus_freq();
		mutex_unlock(&bus_freq_mutex);
		return;
	}
	mutex_unlock(&bus_freq_mutex);
}
EXPORT_SYMBOL(request_bus_freq);

void release_bus_freq(enum bus_freq_mode mode)
{
	mutex_lock(&bus_freq_mutex);

	if (mode == BUS_FREQ_ULTRA_LOW) {
		dev_dbg(busfreq_dev,
			"This mode cannot be released!\n");
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if (mode == BUS_FREQ_HIGH) {
		if (high_bus_count == 0) {
			dev_err(busfreq_dev, "high bus count mismatch!\n");
			dump_stack();
			mutex_unlock(&bus_freq_mutex);
			return;
		}
		high_bus_count--;
	} else if (mode == BUS_FREQ_MED) {
		if (med_bus_count == 0) {
			dev_err(busfreq_dev, "med bus count mismatch!\n");
			dump_stack();
			mutex_unlock(&bus_freq_mutex);
			return;
		}
		med_bus_count--;
	} else if (mode == BUS_FREQ_AUDIO) {
		if (audio_bus_count == 0) {
			dev_err(busfreq_dev, "audio bus count mismatch!\n");
			dump_stack();
			mutex_unlock(&bus_freq_mutex);
			return;
		}
		audio_bus_count--;
	} else if (mode == BUS_FREQ_LOW) {
		if (low_bus_count == 0) {
			dev_err(busfreq_dev, "low bus count mismatch!\n");
			dump_stack();
			mutex_unlock(&bus_freq_mutex);
			return;
		}
		low_bus_count--;
	}

	if (busfreq_suspended || !bus_freq_scaling_initialized ||
		!bus_freq_scaling_is_active) {
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	if ((!audio_bus_freq_mode) && (high_bus_count == 0) &&
		(med_bus_count == 0) && (audio_bus_count != 0)) {
		set_low_bus_freq();
		mutex_unlock(&bus_freq_mutex);
		return;
	}
	if ((!low_bus_freq_mode) && (high_bus_count == 0) &&
		(med_bus_count == 0) && (audio_bus_count == 0) &&
		(low_bus_count != 0)) {
		set_low_bus_freq();
		mutex_unlock(&bus_freq_mutex);
		return;
	}
	if ((!ultra_low_bus_freq_mode) && (high_bus_count == 0) &&
		(med_bus_count == 0) && (audio_bus_count == 0) &&
		(low_bus_count == 0)) {
		set_low_bus_freq();
		mutex_unlock(&bus_freq_mutex);
		return;
	}

	mutex_unlock(&bus_freq_mutex);
}
EXPORT_SYMBOL(release_bus_freq);

int get_bus_freq_mode(void)
{
	return cur_bus_freq_mode;
}
EXPORT_SYMBOL(get_bus_freq_mode);

static struct map_desc ddr_iram_io_desc __initdata = {
	/* .virtual and .pfn are run-time assigned */
	.length		= SZ_1M,
	.type		= MT_MEMORY_RWX_NONCACHED,
};

const static char *ddr_freq_iram_match[] __initconst = {
	"fsl,ddr-lpm-sram",
	NULL
};

static int __init imx_dt_find_ddr_sram(unsigned long node,
		const char *uname, int depth, void *data)
{
	unsigned long ddr_iram_addr;
	const __be32 *prop;

	if (of_flat_dt_match(node, ddr_freq_iram_match)) {
		unsigned int len;

		prop = of_get_flat_dt_prop(node, "reg", &len);
		if (prop == NULL || len != (sizeof(unsigned long) * 2))
			return -EINVAL;
		ddr_iram_addr = be32_to_cpu(prop[0]);
		ddr_freq_change_total_size = be32_to_cpu(prop[1]);
		ddr_freq_change_iram_phys = ddr_iram_addr;

		/* Make sure ddr_freq_change_iram_phys is 8 byte aligned. */
		if ((uintptr_t)(ddr_freq_change_iram_phys) & (FNCPY_ALIGN - 1))
			ddr_freq_change_iram_phys += FNCPY_ALIGN -
				((uintptr_t)ddr_freq_change_iram_phys %
				(FNCPY_ALIGN));
	}
	return 0;
}

void __init imx_busfreq_map_io(void)
{
	/*
	 * Get the address of IRAM to be used by the ddr frequency
	 * change code from the device tree.
	 */
	WARN_ON(of_scan_flat_dt(imx_dt_find_ddr_sram, NULL));
	if (ddr_freq_change_iram_phys) {
		ddr_freq_change_iram_base = IMX_IO_P2V(
			ddr_freq_change_iram_phys);
		if ((iram_tlb_phys_addr & 0xFFF00000) !=
			(ddr_freq_change_iram_phys & 0xFFF00000)) {
			/* We need to create a 1M page table entry. */
			ddr_iram_io_desc.virtual = IMX_IO_P2V(
				ddr_freq_change_iram_phys & 0xFFF00000);
			ddr_iram_io_desc.pfn = __phys_to_pfn(
				ddr_freq_change_iram_phys & 0xFFF00000);
			iotable_init(&ddr_iram_io_desc, 1);
		}
		memset((void *)ddr_freq_change_iram_base, 0,
			ddr_freq_change_total_size);
	}
}

static void bus_freq_daemon_handler(struct work_struct *work)
{
	mutex_lock(&bus_freq_mutex);
	if ((!low_bus_freq_mode) && (!ultra_low_bus_freq_mode)
		&& (high_bus_count == 0) &&
		(med_bus_count == 0) && (audio_bus_count == 0))
		set_low_bus_freq();
	mutex_unlock(&bus_freq_mutex);
}

static ssize_t bus_freq_scaling_enable_show(struct device *dev,
				struct device_attribute *attr, char *buf)
{
	if (bus_freq_scaling_is_active)
		return sprintf(buf, "Bus frequency scaling is enabled\n");
	else
		return sprintf(buf, "Bus frequency scaling is disabled\n");
}

static ssize_t bus_freq_scaling_enable_store(struct device *dev,
				 struct device_attribute *attr,
				 const char *buf, size_t size)
{
	if (strncmp(buf, "1", 1) == 0) {
		bus_freq_scaling_is_active = 1;
		set_high_bus_freq(1);
		/*
		 * We set bus freq to highest at the beginning,
		 * so we use this daemon thread to make sure system
		 * can enter low bus mode if
		 * there is no high bus request pending
		 */
		schedule_delayed_work(&bus_freq_daemon,
			usecs_to_jiffies(5000000));
	} else if (strncmp(buf, "0", 1) == 0) {
		if (bus_freq_scaling_is_active)
			set_high_bus_freq(1);
		bus_freq_scaling_is_active = 0;
	}
	return size;
}

static int bus_freq_pm_notify(struct notifier_block *nb, unsigned long event,
	void *dummy)
{
	mutex_lock(&bus_freq_mutex);

	if (event == PM_SUSPEND_PREPARE) {
		if (cpu_is_imx7d() && imx_src_is_m4_enabled())
			imx_mu_lpm_ready(false);
		high_bus_count++;
		set_high_bus_freq(1);
		busfreq_suspended = 1;
	} else if (event == PM_POST_SUSPEND) {
		busfreq_suspended = 0;
		high_bus_count--;
		if (cpu_is_imx7d() && imx_src_is_m4_enabled())
			imx_mu_lpm_ready(true);
		schedule_delayed_work(&bus_freq_daemon,
			usecs_to_jiffies(5000000));
	}

	mutex_unlock(&bus_freq_mutex);

	return NOTIFY_OK;
}

static int busfreq_reboot_notifier_event(struct notifier_block *this,
						 unsigned long event, void *ptr)
{
	/* System is rebooting. Set the system into high_bus_freq_mode. */
	request_bus_freq(BUS_FREQ_HIGH);

	return 0;
}

static struct notifier_block imx_bus_freq_pm_notifier = {
	.notifier_call = bus_freq_pm_notify,
};

static struct notifier_block imx_busfreq_reboot_notifier = {
	.notifier_call = busfreq_reboot_notifier_event,
};


static DEVICE_ATTR(enable, 0644, bus_freq_scaling_enable_show,
			bus_freq_scaling_enable_store);

/*!
 * This is the probe routine for the bus frequency driver.
 *
 * @param   pdev   The platform device structure
 *
 * @return         The function returns 0 on success
 *
 */

static int busfreq_probe(struct platform_device *pdev)
{
	u32 err;
#ifdef CONFIG_OPTEE
	struct device_node *node_optee = 0;
	uint32_t busfreq_val;
#endif

	busfreq_dev = &pdev->dev;

	/* Return if no IRAM space is allocated for ddr freq change code. */
	if (!ddr_freq_change_iram_base)
		return -ENOMEM;

	if (cpu_is_imx6()) {
		osc_clk = devm_clk_get(&pdev->dev, "osc");
		pll2_400_clk = devm_clk_get(&pdev->dev, "pll2_pfd2_396m");
		pll2_200_clk = devm_clk_get(&pdev->dev, "pll2_198m");
		pll2_bus_clk = devm_clk_get(&pdev->dev, "pll2_bus");
		pll3_clk = devm_clk_get(&pdev->dev, "pll3_usb_otg");
		periph_clk = devm_clk_get(&pdev->dev, "periph");
		periph_pre_clk = devm_clk_get(&pdev->dev, "periph_pre");
		periph_clk2_clk = devm_clk_get(&pdev->dev, "periph_clk2");
		periph_clk2_sel_clk = devm_clk_get(&pdev->dev,
			"periph_clk2_sel");
		if (IS_ERR(osc_clk) || IS_ERR(pll2_400_clk)
			|| IS_ERR(pll2_200_clk) || IS_ERR(pll2_bus_clk)
			|| IS_ERR(pll3_clk) || IS_ERR(periph_clk)
			|| IS_ERR(periph_pre_clk) || IS_ERR(periph_clk2_clk)
			|| IS_ERR(periph_clk2_sel_clk)) {
			dev_err(busfreq_dev,
				"%s: failed to get busfreq clk\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6dl()) {
		axi_alt_sel_clk = devm_clk_get(&pdev->dev, "axi_alt_sel");
		axi_sel_clk = devm_clk_get(&pdev->dev, "axi_sel");
		pll3_pfd1_540m_clk = devm_clk_get(&pdev->dev, "pll3_pfd1_540m");
		if (IS_ERR(axi_alt_sel_clk) || IS_ERR(axi_sel_clk)
			|| IS_ERR(pll3_pfd1_540m_clk)) {
			dev_err(busfreq_dev,
				"%s: failed to get busfreq clk\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6sl() || cpu_is_imx6ull() ||
	    cpu_is_imx6sll()) {
		ahb_clk = devm_clk_get(&pdev->dev, "ahb");
		ocram_clk = devm_clk_get(&pdev->dev, "ocram");
		periph2_clk = devm_clk_get(&pdev->dev, "periph2");
		periph2_pre_clk = devm_clk_get(&pdev->dev, "periph2_pre");
		periph2_clk2_clk = devm_clk_get(&pdev->dev, "periph2_clk2");
		periph2_clk2_sel_clk =
			devm_clk_get(&pdev->dev, "periph2_clk2_sel");
		if (IS_ERR(ahb_clk) || IS_ERR(ocram_clk)
			|| IS_ERR(periph2_clk) || IS_ERR(periph2_pre_clk)
			|| IS_ERR(periph2_clk2_clk)
			|| IS_ERR(periph2_clk2_sel_clk)) {
			dev_err(busfreq_dev,
				"%s: failed to get busfreq clk for imx6ul/sx/sl.\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull() || cpu_is_imx6sll()) {
		mmdc_clk = devm_clk_get(&pdev->dev, "mmdc");
		if (IS_ERR(mmdc_clk)) {
			dev_err(busfreq_dev,
				"%s: failed to get mmdc clk for imx6sx/ul.\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6q()) {
		mmdc_clk = devm_clk_get(&pdev->dev, "mmdc");
		if (IS_ERR(mmdc_clk)) {
			mmdc_clk = NULL;
		}
	}

	if (cpu_is_imx6sx()) {
		m4_clk = devm_clk_get(&pdev->dev, "m4");
		if (IS_ERR(m4_clk)) {
			dev_err(busfreq_dev, "%s: failed to get m4 clk.\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6sl()) {
		pll2_bypass_src_clk = devm_clk_get(&pdev->dev, "pll2_bypass_src");
		pll2_bypass_clk = devm_clk_get(&pdev->dev, "pll2_bypass");
		pll2_clk = devm_clk_get(&pdev->dev, "pll2");
		if (IS_ERR(pll2_bypass_src_clk) || IS_ERR(pll2_bypass_clk)
			|| IS_ERR(pll2_clk)) {
			dev_err(busfreq_dev,
				"%s failed to get busfreq clk for imx6sl.\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx6ull() || cpu_is_imx6sl() || cpu_is_imx6sll()) {
		arm_clk = devm_clk_get(&pdev->dev, "arm");
		step_clk = devm_clk_get(&pdev->dev, "step");
		pll1_clk = devm_clk_get(&pdev->dev, "pll1");
		pll1_bypass_src_clk = devm_clk_get(&pdev->dev, "pll1_bypass_src");
		pll1_bypass_clk = devm_clk_get(&pdev->dev, "pll1_bypass");
		pll1_sys_clk = devm_clk_get(&pdev->dev, "pll1_sys");
		pll1_sw_clk = devm_clk_get(&pdev->dev, "pll1_sw");
		if (IS_ERR(arm_clk) || IS_ERR(step_clk) || IS_ERR(pll1_clk)
			|| IS_ERR(pll1_bypass_src_clk) || IS_ERR(pll1_bypass_clk)
			|| IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk)) {
			dev_err(busfreq_dev, "%s failed to get busfreq clk for imx6ull/sl.\n", __func__);
			return -EINVAL;
		}
	}

	if (cpu_is_imx7d()) {
		osc_clk = devm_clk_get(&pdev->dev, "osc");
		axi_sel_clk = devm_clk_get(&pdev->dev, "axi_sel");
		ahb_sel_clk = devm_clk_get(&pdev->dev, "ahb_sel");
		pfd0_392m = devm_clk_get(&pdev->dev, "pfd0_392m");
		dram_root = devm_clk_get(&pdev->dev, "dram_root");
		dram_alt_sel = devm_clk_get(&pdev->dev, "dram_alt_sel");
		pll_dram = devm_clk_get(&pdev->dev, "pll_dram");
		dram_alt_root = devm_clk_get(&pdev->dev, "dram_alt_root");
		pfd1_332m = devm_clk_get(&pdev->dev, "pfd1_332m");
		pfd2_270m = devm_clk_get(&pdev->dev, "pfd2_270m");
		ahb_clk = devm_clk_get(&pdev->dev, "ahb");
		axi_clk = devm_clk_get(&pdev->dev, "axi");
		if (IS_ERR(osc_clk) || IS_ERR(axi_sel_clk) || IS_ERR(ahb_clk)
			|| IS_ERR(pfd0_392m) || IS_ERR(dram_root)
			|| IS_ERR(dram_alt_sel) || IS_ERR(pll_dram)
			|| IS_ERR(dram_alt_root) || IS_ERR(pfd1_332m)
			|| IS_ERR(ahb_clk) || IS_ERR(axi_clk)
			|| IS_ERR(pfd2_270m)) {
			dev_err(busfreq_dev,
				"%s: failed to get busfreq clk\n", __func__);
			return -EINVAL;
		}
	}

	err = sysfs_create_file(&busfreq_dev->kobj, &dev_attr_enable.attr);
	if (err) {
		dev_err(busfreq_dev,
		       "Unable to register sysdev entry for BUSFREQ");
		return err;
	}

	if (of_property_read_u32(pdev->dev.of_node, "fsl,max_ddr_freq",
			&ddr_normal_rate)) {
		dev_err(busfreq_dev, "max_ddr_freq entry missing\n");
		return -EINVAL;
	}

	high_bus_freq_mode = 1;
	med_bus_freq_mode = 0;
	low_bus_freq_mode = 0;
	audio_bus_freq_mode = 0;
	ultra_low_bus_freq_mode = 0;
	cur_bus_freq_mode = BUS_FREQ_HIGH;

	bus_freq_scaling_is_active = 1;
	bus_freq_scaling_initialized = 1;

	ddr_low_rate = LPAPM_CLK;

	INIT_DELAYED_WORK(&low_bus_freq_handler, reduce_bus_freq_handler);
	INIT_DELAYED_WORK(&bus_freq_daemon, bus_freq_daemon_handler);
	register_pm_notifier(&imx_bus_freq_pm_notifier);
	register_reboot_notifier(&imx_busfreq_reboot_notifier);

	/* enter low bus mode if no high speed device enabled */
	schedule_delayed_work(&bus_freq_daemon,
		msecs_to_jiffies(10000));

	/*
	 * Need to make sure to an entry for the ddr freq change code
	 * address in the IRAM page table.
	 * This is only required if the DDR freq code and suspend/idle
	 * code are in different OCRAM spaces.
	 */
	if ((iram_tlb_phys_addr & 0xFFF00000) !=
		(ddr_freq_change_iram_phys & 0xFFF00000)) {
		unsigned long i;

		/*
		 * Make sure the ddr_iram virtual address has a mapping
		 * in the IRAM page table.
		 */
		i = ((IMX_IO_P2V(ddr_freq_change_iram_phys) >> 20) << 2) / 4;
		*((unsigned long *)iram_tlb_base_addr + i) =
			(ddr_freq_change_iram_phys  & 0xFFF00000) |
			TT_ATTRIB_NON_CACHEABLE_1M;
	}

	if (cpu_is_imx7d()) {
		ddr_type = imx_ddrc_get_ddr_type();
		/* reduce ddr3 normal rate to 400M due to CKE issue on TO1.1 */
		if (imx_get_soc_revision() == IMX_CHIP_REVISION_1_1 &&
			ddr_type == IMX_DDR_TYPE_DDR3) {
			ddr_normal_rate = 400000000;
			pr_info("ddr3 normal rate changed to 400MHz for TO1.1.\n");
		}
		busfreq_func.init   = &init_ddrc_ddr_settings;
		busfreq_func.update = &update_ddr_freq_imx_smp;
	} else if (cpu_is_imx6sx() || cpu_is_imx6ul() || cpu_is_imx6ull() ||
		cpu_is_imx6sll()) {
		ddr_type = imx_mmdc_get_ddr_type();
		if (ddr_type == IMX_DDR_TYPE_DDR3) {
			busfreq_func.init   = &init_mmdc_ddr3_settings_imx6_up;
			busfreq_func.update = &update_ddr_freq_imx6_up;
		} else if (ddr_type == IMX_DDR_TYPE_LPDDR2 ||
			 ddr_type == IMX_MMDC_DDR_TYPE_LPDDR3) {
			busfreq_func.init   = &init_mmdc_lpddr2_settings;
			busfreq_func.update = &update_lpddr2_freq;
		}
	} else if (cpu_is_imx6q() || cpu_is_imx6dl()) {
		ddr_type = imx_mmdc_get_ddr_type();
		if (ddr_type == MMDC_MDMISC_DDR_TYPE_DDR3) {
			busfreq_func.init   = &init_mmdc_ddr3_settings_imx6_smp;
			busfreq_func.update = &update_ddr_freq_imx_smp;
		} else if (ddr_type == MMDC_MDMISC_DDR_TYPE_LPDDR2) {
			busfreq_func.init   = &init_mmdc_lpddr2_settings_mx6q;
			busfreq_func.update = &update_lpddr2_freq_smp;
		}
	} else if (cpu_is_imx6sl()) {
		busfreq_func.init   = &init_mmdc_lpddr2_settings;
		busfreq_func.update = &update_lpddr2_freq;
	}

#ifdef CONFIG_OPTEE
	/*
	 * Find the OPTEE node in the DT and look for the
	 * busfreq property.
	 * If property present and set to 1, busfreq is done by
	 * calling the OPTEE OS
	 */
	node_optee = of_find_compatible_node(NULL, NULL, "linaro,optee-tz");

	if (node_optee) {
		if (of_property_read_u32(node_optee, "busfreq",
			    &busfreq_val) == 0) {
			pr_info("OPTEE busfreq %s",
				(busfreq_val ? "Supported" : "Not Supported"));
			if (busfreq_val) {
				busfreq_func.init   = &init_freq_optee;
				busfreq_func.update = &update_freq_optee;
			}
		}
	}
#endif

	if (busfreq_func.init)
		err = busfreq_func.init(pdev);
	else
		err = -EINVAL;

	if (!err) {
		if (cpu_is_imx6sx()) {
			/*
			 * If M4 is enabled and rate > 24MHz,
			 * add high bus count
			 */
			if (imx_src_is_m4_enabled() &&
				(clk_get_rate(m4_clk) > LPAPM_CLK))
				high_bus_count++;
		}

		if (cpu_is_imx7d() && imx_src_is_m4_enabled()) {
			high_bus_count++;
			imx_mu_lpm_ready(true);
		}
	}

	if (err) {
		dev_err(busfreq_dev, "Busfreq init of ddr controller failed\n");
		return err;
	}
	return 0;
}

static const struct of_device_id imx_busfreq_ids[] = {
	{ .compatible = "fsl,imx_busfreq", },
	{ /* sentinel */ }
};

static struct platform_driver busfreq_driver = {
	.driver = {
		.name = "imx_busfreq",
		.owner  = THIS_MODULE,
		.of_match_table = imx_busfreq_ids,
		},
	.probe = busfreq_probe,
};

/*!
 * Initialise the busfreq_driver.
 *
 * @return  The function always returns 0.
 */

static int __init busfreq_init(void)
{
#ifndef CONFIG_MX6_VPU_352M
	if (platform_driver_register(&busfreq_driver) != 0)
		return -ENODEV;

	pr_info("Bus freq driver module loaded\n");
#endif
	return 0;
}

static void __exit busfreq_cleanup(void)
{
	sysfs_remove_file(&busfreq_dev->kobj, &dev_attr_enable.attr);

	/* Unregister the device structure */
	platform_driver_unregister(&busfreq_driver);
	bus_freq_scaling_initialized = 0;
}

module_init(busfreq_init);
module_exit(busfreq_cleanup);

MODULE_AUTHOR("Freescale Semiconductor, Inc.");
MODULE_DESCRIPTION("BusFreq driver");
MODULE_LICENSE("GPL");