Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/net/appletalk/Kconfig b/drivers/net/appletalk/Kconfig
new file mode 100644
index 0000000..60b1967
--- /dev/null
+++ b/drivers/net/appletalk/Kconfig
@@ -0,0 +1,98 @@
+#
+# Appletalk driver configuration
+#
+config DEV_APPLETALK
+	bool "Appletalk interfaces support"
+	depends on ATALK
+	help
+	  AppleTalk is the protocol that Apple computers can use to communicate
+	  on a network.  If your Linux box is connected to such a network, and wish
+	  to do IP over it, or you have a LocalTalk card and wish to use it to
+	  connect to the AppleTalk network, say Y.
+	  
+
+config LTPC
+	tristate "Apple/Farallon LocalTalk PC support"
+	depends on DEV_APPLETALK && (ISA || EISA)
+	help
+	  This allows you to use the AppleTalk PC card to connect to LocalTalk
+	  networks. The card is also known as the Farallon PhoneNet PC card.
+	  If you are in doubt, this card is the one with the 65C02 chip on it.
+	  You also need version 1.3.3 or later of the netatalk package.
+	  This driver is experimental, which means that it may not work.
+	  See the file <file:Documentation/networking/ltpc.txt>.
+
+config COPS
+	tristate "COPS LocalTalk PC support"
+	depends on DEV_APPLETALK && (ISA || EISA)
+	help
+	  This allows you to use COPS AppleTalk cards to connect to LocalTalk
+	  networks. You also need version 1.3.3 or later of the netatalk
+	  package. This driver is experimental, which means that it may not
+	  work. This driver will only work if you choose "AppleTalk DDP"
+	  networking support, above.
+	  Please read the file <file:Documentation/networking/cops.txt>.
+
+config COPS_DAYNA
+	bool "Dayna firmware support"
+	depends on COPS
+	help
+	  Support COPS compatible cards with Dayna style firmware (Dayna
+	  DL2000/ Daynatalk/PC (half length), COPS LT-95, Farallon PhoneNET PC
+	  III, Farallon PhoneNET PC II).
+
+config COPS_TANGENT
+	bool "Tangent firmware support"
+	depends on COPS
+	help
+	  Support COPS compatible cards with Tangent style firmware (Tangent
+	  ATB_II, Novell NL-1000, Daystar Digital LT-200.
+
+config IPDDP
+	tristate "Appletalk-IP driver support"
+	depends on DEV_APPLETALK && ATALK
+	---help---
+	  This allows IP networking for users who only have AppleTalk
+	  networking available. This feature is experimental. With this
+	  driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux
+	  box is stuck on an AppleTalk only network) or decapsulate (e.g. if
+	  you want your Linux box to act as an Internet gateway for a zoo of
+	  AppleTalk connected Macs). Please see the file
+	  <file:Documentation/networking/ipddp.txt> for more information.
+
+	  If you say Y here, the AppleTalk-IP support will be compiled into
+	  the kernel. In this case, you can either use encapsulation or
+	  decapsulation, but not both. With the following two questions, you
+	  decide which one you want.
+
+	  To compile the AppleTalk-IP support as a module, choose M here: the
+	  module will be called ipddp.
+	  In this case, you will be able to use both encapsulation and
+	  decapsulation simultaneously, by loading two copies of the module
+	  and specifying different values for the module option ipddp_mode.
+
+config IPDDP_ENCAP
+	bool "IP to Appletalk-IP Encapsulation support"
+	depends on IPDDP
+	help
+	  If you say Y here, the AppleTalk-IP code will be able to encapsulate
+	  IP packets inside AppleTalk frames; this is useful if your Linux box
+	  is stuck on an AppleTalk network (which hopefully contains a
+	  decapsulator somewhere). Please see
+	  <file:Documentation/networking/ipddp.txt> for more information. If
+	  you said Y to "AppleTalk-IP driver support" above and you say Y
+	  here, then you cannot say Y to "AppleTalk-IP to IP Decapsulation
+	  support", below.
+
+config IPDDP_DECAP
+	bool "Appletalk-IP to IP Decapsulation support"
+	depends on IPDDP
+	help
+	  If you say Y here, the AppleTalk-IP code will be able to decapsulate
+	  AppleTalk-IP frames to IP packets; this is useful if you want your
+	  Linux box to act as an Internet gateway for an AppleTalk network.
+	  Please see <file:Documentation/networking/ipddp.txt> for more
+	  information.  If you said Y to "AppleTalk-IP driver support" above
+	  and you say Y here, then you cannot say Y to "IP to AppleTalk-IP
+	  Encapsulation support", above.
+