diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt
index 6e25340..accfe2f 100644
--- a/Documentation/RCU/checklist.txt
+++ b/Documentation/RCU/checklist.txt
@@ -298,3 +298,15 @@
 
 	Note that, rcu_assign_pointer() and rcu_dereference() relate to
 	SRCU just as they do to other forms of RCU.
+
+15.	The whole point of call_rcu(), synchronize_rcu(), and friends
+	is to wait until all pre-existing readers have finished before
+	carrying out some otherwise-destructive operation.  It is
+	therefore critically important to -first- remove any path
+	that readers can follow that could be affected by the
+	destructive operation, and -only- -then- invoke call_rcu(),
+	synchronize_rcu(), or friends.
+
+	Because these primitives only wait for pre-existing readers,
+	it is the caller's responsibility to guarantee safety to
+	any subsequent readers.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 5ddbe35..20d3b94 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -335,3 +335,12 @@
 	Secmark, it is time to deprecate the older mechanism and start the
 	process of removing the old code.
 Who:	Paul Moore <paul.moore@hp.com>
+---------------------------
+
+What:	sysfs ui for changing p4-clockmod parameters
+When:	September 2009
+Why:	See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
+	e088e4c9cdb618675874becb91b2fd581ee707e6.
+	Removal is subject to fixing any remaining bugs in ACPI which may
+	cause the thermal throttling not to happen at the right time.
+Who:	Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
diff --git a/Documentation/filesystems/squashfs.txt b/Documentation/filesystems/squashfs.txt
index 3e79e4a..b324c03 100644
--- a/Documentation/filesystems/squashfs.txt
+++ b/Documentation/filesystems/squashfs.txt
@@ -22,7 +22,7 @@
 
 				Squashfs		Cramfs
 
-Max filesystem size:		2^64			16 MiB
+Max filesystem size:		2^64			256 MiB
 Max file size:			~ 2 TiB			16 MiB
 Max files:			unlimited		unlimited
 Max directories:		unlimited		unlimited
diff --git a/Documentation/networking/ipv6.txt b/Documentation/networking/ipv6.txt
new file mode 100644
index 0000000..268e5c1
--- /dev/null
+++ b/Documentation/networking/ipv6.txt
@@ -0,0 +1,35 @@
+
+Options for the ipv6 module are supplied as parameters at load time.
+
+Module options may be given as command line arguments to the insmod
+or modprobe command, but are usually specified in either the
+/etc/modules.conf or /etc/modprobe.conf configuration file, or in a
+distro-specific configuration file.
+
+The available ipv6 module parameters are listed below.  If a parameter
+is not specified the default value is used.
+
+The parameters are as follows:
+
+disable
+
+	Specifies whether to load the IPv6 module, but disable all
+	its functionality.  This might be used when another module
+	has a dependency on the IPv6 module being loaded, but no
+	IPv6 addresses or operations are desired.
+
+	The possible values and their effects are:
+
+	0
+		IPv6 is enabled.
+
+		This is the default value.
+
+	1
+		IPv6 is disabled.
+
+		No IPv6 addresses will be added to interfaces, and
+		it will not be possible to open an IPv6 socket.
+
+		A reboot is required to enable IPv6.
+
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 134af97..b7f2332 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -347,6 +347,111 @@
 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
 #endif
 
+/* --------------------------------------------------------------------
+ *  Compact Flash (PCMCIA or IDE)
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
+    defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+
+static struct at91_cf_data cf0_data;
+
+static struct resource cf0_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_4,
+		.end	= AT91_CHIPSELECT_4 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf0_device = {
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &cf0_data,
+	},
+	.resource	= cf0_resources,
+	.num_resources	= ARRAY_SIZE(cf0_resources),
+};
+
+static struct at91_cf_data cf1_data;
+
+static struct resource cf1_resources[] = {
+	[0] = {
+		.start	= AT91_CHIPSELECT_5,
+		.end	= AT91_CHIPSELECT_5 + SZ_256M - 1,
+		.flags	= IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
+	}
+};
+
+static struct platform_device cf1_device = {
+	.id		= 1,
+	.dev		= {
+				.platform_data	= &cf1_data,
+	},
+	.resource	= cf1_resources,
+	.num_resources	= ARRAY_SIZE(cf1_resources),
+};
+
+void __init at91_add_device_cf(struct at91_cf_data *data)
+{
+	unsigned long ebi0_csa;
+	struct platform_device *pdev;
+
+	if (!data)
+		return;
+
+	/*
+	 * assign CS4 or CS5 to SMC with Compact Flash logic support,
+	 * we assume SMC timings are configured by board code,
+	 * except True IDE where timings are controlled by driver
+	 */
+	ebi0_csa = at91_sys_read(AT91_MATRIX_EBI0CSA);
+	switch (data->chipselect) {
+	case 4:
+		at91_set_A_periph(AT91_PIN_PD6, 0);  /* EBI0_NCS4/CFCS0 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
+		cf0_data = *data;
+		pdev = &cf0_device;
+		break;
+	case 5:
+		at91_set_A_periph(AT91_PIN_PD7, 0);  /* EBI0_NCS5/CFCS1 */
+		ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
+		cf1_data = *data;
+		pdev = &cf1_device;
+		break;
+	default:
+		printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
+		       data->chipselect);
+		return;
+	}
+	at91_sys_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
+
+	if (data->det_pin) {
+		at91_set_gpio_input(data->det_pin, 1);
+		at91_set_deglitch(data->det_pin, 1);
+	}
+
+	if (data->irq_pin) {
+		at91_set_gpio_input(data->irq_pin, 1);
+		at91_set_deglitch(data->irq_pin, 1);
+	}
+
+	if (data->vcc_pin)
+		/* initially off */
+		at91_set_gpio_output(data->vcc_pin, 0);
+
+	/* enable EBI controlled pins */
+	at91_set_A_periph(AT91_PIN_PD5, 1);  /* NWAIT */
+	at91_set_A_periph(AT91_PIN_PD8, 0);  /* CFCE1 */
+	at91_set_A_periph(AT91_PIN_PD9, 0);  /* CFCE2 */
+	at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
+
+	pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+	platform_device_register(pdev);
+}
+#else
+void __init at91_add_device_cf(struct at91_cf_data *data) {}
+#endif
 
 /* --------------------------------------------------------------------
  *  NAND / SmartMedia
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 0b3ae21..793fe7b 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -56,6 +56,9 @@
 	u8	vcc_pin;		/* power switching */
 	u8	rst_pin;		/* card reset */
 	u8	chipselect;		/* EBI Chip Select number */
+	u8	flags;
+#define AT91_CF_TRUE_IDE	0x01
+#define AT91_IDE_SWAP_A0_A2	0x02
 };
 extern void __init at91_add_device_cf(struct at91_cf_data *data);
 
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index f6a1345..6031e17 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -81,7 +81,7 @@
 	}
 
 	ldp_smc911x_resources[0].start = cs_mem_base + 0x0;
-	ldp_smc911x_resources[0].end   = cs_mem_base + 0xf;
+	ldp_smc911x_resources[0].end   = cs_mem_base + 0xff;
 	udelay(100);
 
 	eth_gpio = LDP_SMC911X_GPIO;
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index 8f1f97d..0c1f86e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -1129,6 +1129,7 @@
 
 config PM_WAKEUP_BY_GPIO
 	bool "Allow Wakeup from Standby by GPIO"
+	depends on PM && !BF54x
 
 config PM_WAKEUP_GPIO_NUMBER
 	int "GPIO number"
@@ -1168,6 +1169,12 @@
 	default n
 	help
 	  Enable General-Purpose Wake-Up (Voltage Regulator Power-Up)
+	  (all processors, except ADSP-BF549). This option sets
+	  the general-purpose wake-up enable (GPWE) control bit to enable
+	  wake-up upon detection of an active low signal on the /GPW (PH7) pin.
+	  On ADSP-BF549 this option enables the the same functionality on the
+	  /MRXON pin also PH7.
+
 endmenu
 
 menu "CPU Frequency scaling"
diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug
index 5f981d9..79e7e63 100644
--- a/arch/blackfin/Kconfig.debug
+++ b/arch/blackfin/Kconfig.debug
@@ -21,12 +21,6 @@
 config HAVE_ARCH_KGDB
 	def_bool y
 
-config KGDB_TESTCASE
-	tristate "KGDB: for test case in expect"
-	default n
-	help
-	  This is a kgdb test case for automated testing.
-
 config DEBUG_VERBOSE
 	bool "Verbose fault messages"
 	default y
diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig
index 4fdb9e0..281f4b6 100644
--- a/arch/blackfin/configs/BF518F-EZBRD_defconfig
+++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc2
-# Fri Jan  9 17:58:41 2009
+# Linux kernel version: 2.6.28
+# Fri Feb 20 10:01:44 2009
 #
 # CONFIG_MMU is not set
 # CONFIG_FPU is not set
@@ -133,10 +133,15 @@
 # CONFIG_BF538 is not set
 # CONFIG_BF539 is not set
 # CONFIG_BF542 is not set
+# CONFIG_BF542M is not set
 # CONFIG_BF544 is not set
+# CONFIG_BF544M is not set
 # CONFIG_BF547 is not set
+# CONFIG_BF547M is not set
 # CONFIG_BF548 is not set
+# CONFIG_BF548M is not set
 # CONFIG_BF549 is not set
+# CONFIG_BF549M is not set
 # CONFIG_BF561 is not set
 CONFIG_BF_REV_MIN=0
 CONFIG_BF_REV_MAX=2
@@ -426,7 +431,17 @@
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
+CONFIG_NET_DSA=y
+# CONFIG_NET_DSA_TAG_DSA is not set
+# CONFIG_NET_DSA_TAG_EDSA is not set
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_TAG_STPID=y
+# CONFIG_NET_DSA_MV88E6XXX is not set
+# CONFIG_NET_DSA_MV88E6060 is not set
+# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
+# CONFIG_NET_DSA_MV88E6131 is not set
+# CONFIG_NET_DSA_MV88E6123_61_65 is not set
+CONFIG_NET_DSA_KSZ8893M=y
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -529,6 +544,8 @@
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -561,7 +578,9 @@
 # CONFIG_BLK_DEV_HD is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -607,6 +626,7 @@
 # CONFIG_SMC91X is not set
 # CONFIG_SMSC911X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -764,7 +784,23 @@
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BFIN=y
+# CONFIG_SPI_BFIN_LOCK is not set
+# CONFIG_SPI_BITBANG is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -788,8 +824,10 @@
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_REGULATOR is not set
 
 #
 # Multimedia devices
@@ -861,10 +899,18 @@
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
 
 #
 # Platform RTC drivers
@@ -1062,12 +1108,20 @@
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+
+#
+# Tracers
+#
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
 # CONFIG_DYNAMIC_PRINTK_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_KGDB_TESTCASE is not set
 CONFIG_DEBUG_VERBOSE=y
 CONFIG_DEBUG_MMRS=y
 # CONFIG_DEBUG_HWERR is not set
@@ -1100,6 +1154,7 @@
 #
 # CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_CRYPTD is not set
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 833128b..a50050f 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -327,8 +327,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig
index 334c94b..0a2a00d 100644
--- a/arch/blackfin/configs/BF533-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF533-EZKIT_defconfig
@@ -290,8 +290,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig
index 9d73343..eb02758 100644
--- a/arch/blackfin/configs/BF533-STAMP_defconfig
+++ b/arch/blackfin/configs/BF533-STAMP_defconfig
@@ -290,8 +290,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig
index 4fb4108..9e62b9f 100644
--- a/arch/blackfin/configs/BF537-STAMP_defconfig
+++ b/arch/blackfin/configs/BF537-STAMP_defconfig
@@ -298,8 +298,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
@@ -568,15 +568,7 @@
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=m
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_BFIN is not set
-CONFIG_MTD_NAND_IDS=m
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=m
+# CONFIG_MTD_NAND is not set
 # CONFIG_MTD_ONENAND is not set
 
 #
diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig
index cb32f56..dd6ad6be 100644
--- a/arch/blackfin/configs/BF538-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF538-EZKIT_defconfig
@@ -306,8 +306,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 0f869761..6bc2fb1 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -361,8 +361,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
@@ -680,7 +680,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig
index 042c7ad..69714fb 100644
--- a/arch/blackfin/configs/BF561-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF561-EZKIT_defconfig
@@ -329,8 +329,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_BFIN_L2_CACHEABLE is not set
 # CONFIG_MPU is not set
 
diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig
index 3a20e28..017c6ea 100644
--- a/arch/blackfin/configs/BlackStamp_defconfig
+++ b/arch/blackfin/configs/BlackStamp_defconfig
@@ -288,8 +288,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig
index 865ed85..d880ef7 100644
--- a/arch/blackfin/configs/CM-BF527_defconfig
+++ b/arch/blackfin/configs/CM-BF527_defconfig
@@ -332,8 +332,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 # CONFIG_MPU is not set
 
 #
diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig
index efe9741..f410430 100644
--- a/arch/blackfin/configs/CM-BF548_defconfig
+++ b/arch/blackfin/configs/CM-BF548_defconfig
@@ -336,8 +336,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 # CONFIG_MPU is not set
 
@@ -595,7 +595,7 @@
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index eae83b5..7db9387 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -612,7 +612,7 @@
 CONFIG_SCSI=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
+# CONFIG_SCSI_PROC_FS is not set
 
 #
 # SCSI support type (disk, tape, CD-ROM)
diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig
index fa580af..a46529c 100644
--- a/arch/blackfin/configs/SRV1_defconfig
+++ b/arch/blackfin/configs/SRV1_defconfig
@@ -282,8 +282,8 @@
 CONFIG_BFIN_DCACHE=y
 # CONFIG_BFIN_DCACHE_BANKA is not set
 # CONFIG_BFIN_ICACHE_LOCK is not set
-# CONFIG_BFIN_WB is not set
-CONFIG_BFIN_WT=y
+CONFIG_BFIN_WB=y
+# CONFIG_BFIN_WT is not set
 CONFIG_L1_MAX_PIECE=16
 
 #
diff --git a/arch/blackfin/include/asm/Kbuild b/arch/blackfin/include/asm/Kbuild
index 606ecfd..09c3141 100644
--- a/arch/blackfin/include/asm/Kbuild
+++ b/arch/blackfin/include/asm/Kbuild
@@ -1,3 +1,4 @@
 include include/asm-generic/Kbuild.asm
 
+unifdef-y += bfin_sport.h
 unifdef-y += fixed_code.h
diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h
index fe88a2c..65a651d 100644
--- a/arch/blackfin/include/asm/bfin_sport.h
+++ b/arch/blackfin/include/asm/bfin_sport.h
@@ -1,30 +1,9 @@
 /*
- * File:         include/asm-blackfin/bfin_sport.h
- * Based on:
- * Author:       Roy Huang (roy.huang@analog.com)
+ * bfin_sport.h - userspace header for bfin sport driver
  *
- * Created:      Thu Aug. 24 2006
- * Description:
+ * Copyright 2004-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BFIN_SPORT_H__
@@ -42,11 +21,10 @@
 #define NORM_FORMAT	0x0
 #define ALAW_FORMAT	0x2
 #define ULAW_FORMAT	0x3
-struct sport_register;
 
 /* Function driver which use sport must initialize the structure */
 struct sport_config {
-	/*TDM (multichannels), I2S or other mode */
+	/* TDM (multichannels), I2S or other mode */
 	unsigned int mode:3;
 
 	/* if TDM mode is selected, channels must be set */
@@ -72,12 +50,18 @@
 	int serial_clk;
 	int fsync_clk;
 
-	unsigned int data_format:2;	/*Normal, u-law or a-law */
+	unsigned int data_format:2;	/* Normal, u-law or a-law */
 
 	int word_len;		/* How length of the word in bits, 3-32 bits */
 	int dma_enabled;
 };
 
+/* Userspace interface */
+#define SPORT_IOC_MAGIC		'P'
+#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
+
+#ifdef __KERNEL__
+
 struct sport_register {
 	unsigned short tcr1;
 	unsigned short reserved0;
@@ -117,9 +101,6 @@
 	unsigned long mrcs3;
 };
 
-#define SPORT_IOC_MAGIC		'P'
-#define SPORT_IOC_CONFIG	_IOWR('P', 0x01, struct sport_config)
-
 struct sport_dev {
 	struct cdev cdev;	/* Char device structure */
 
@@ -149,6 +130,8 @@
 	struct sport_config config;
 };
 
+#endif
+
 #define SPORT_TCR1	0
 #define	SPORT_TCR2	1
 #define	SPORT_TCLKDIV	2
@@ -169,4 +152,4 @@
 #define SPORT_MRCS2	22
 #define SPORT_MRCS3	23
 
-#endif				/*__BFIN_SPORT_H__*/
+#endif
diff --git a/arch/blackfin/include/asm/ipipe.h b/arch/blackfin/include/asm/ipipe.h
index 76f53d8..343b563 100644
--- a/arch/blackfin/include/asm/ipipe.h
+++ b/arch/blackfin/include/asm/ipipe.h
@@ -35,9 +35,9 @@
 #include <asm/atomic.h>
 #include <asm/traps.h>
 
-#define IPIPE_ARCH_STRING     "1.8-00"
+#define IPIPE_ARCH_STRING     "1.9-00"
 #define IPIPE_MAJOR_NUMBER    1
-#define IPIPE_MINOR_NUMBER    8
+#define IPIPE_MINOR_NUMBER    9
 #define IPIPE_PATCH_NUMBER    0
 
 #ifdef CONFIG_SMP
@@ -83,9 +83,9 @@
 				"%2 = CYCLES2\n"		\
 				"CC = %2 == %0\n"		\
 				"if ! CC jump 1b\n"		\
-				: "=r" (((unsigned long *)&t)[1]),	\
-				  "=r" (((unsigned long *)&t)[0]),	\
-				  "=r" (__cy2)				\
+				: "=d,a" (((unsigned long *)&t)[1]),	\
+				  "=d,a" (((unsigned long *)&t)[0]),	\
+				  "=d,a" (__cy2)				\
 				: /*no input*/ : "CC");			\
 	t;								\
 	})
@@ -118,35 +118,40 @@
 
 #define __ipipe_disable_irq(irq)	(irq_desc[irq].chip->mask(irq))
 
-#define __ipipe_lock_root()					\
-	set_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline int __ipipe_check_tickdev(const char *devname)
+{
+	return 1;
+}
 
-#define __ipipe_unlock_root()					\
-	clear_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags)
+static inline void __ipipe_lock_root(void)
+{
+	set_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
+
+static inline void __ipipe_unlock_root(void)
+{
+	clear_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status));
+}
 
 void __ipipe_enable_pipeline(void);
 
 #define __ipipe_hook_critical_ipi(ipd) do { } while (0)
 
-#define __ipipe_sync_pipeline(syncmask)					\
-	do {								\
-		struct ipipe_domain *ipd = ipipe_current_domain;	\
-		if (likely(ipd != ipipe_root_domain || !test_bit(IPIPE_ROOTLOCK_FLAG, &ipd->flags))) \
-			__ipipe_sync_stage(syncmask);			\
-	} while (0)
+#define __ipipe_sync_pipeline  ___ipipe_sync_pipeline
+void ___ipipe_sync_pipeline(unsigned long syncmask);
 
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs);
 
 int __ipipe_get_irq_priority(unsigned irq);
 
-int __ipipe_get_irqthread_priority(unsigned irq);
-
 void __ipipe_stall_root_raw(void);
 
 void __ipipe_unstall_root_raw(void);
 
 void __ipipe_serial_debug(const char *fmt, ...);
 
+asmlinkage void __ipipe_call_irqtail(unsigned long addr);
+
 DECLARE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
 extern unsigned long __ipipe_core_clock;
@@ -162,42 +167,25 @@
 
 #define __ipipe_run_irqtail()  /* Must be a macro */			\
 	do {								\
-		asmlinkage void __ipipe_call_irqtail(void);		\
 		unsigned long __pending;				\
-		CSYNC();					\
+		CSYNC();						\
 		__pending = bfin_read_IPEND();				\
 		if (__pending & 0x8000) {				\
 			__pending &= ~0x8010;				\
 			if (__pending && (__pending & (__pending - 1)) == 0) \
-				__ipipe_call_irqtail();			\
+				__ipipe_call_irqtail(__ipipe_irq_tail_hook); \
 		}							\
 	} while (0)
 
 #define __ipipe_run_isr(ipd, irq)					\
 	do {								\
 		if (ipd == ipipe_root_domain) {				\
-			/*						\
-			 * Note: the I-pipe implements a threaded interrupt model on \
-			 * this arch for Linux external IRQs. The interrupt handler we \
-			 * call here only wakes up the associated IRQ thread. \
-			 */						\
-			if (ipipe_virtual_irq_p(irq)) {			\
-				/* No irqtail here; virtual interrupts have no effect \
-				   on IPEND so there is no need for processing \
-				   deferral. */				\
-				local_irq_enable_nohead(ipd);		\
+			local_irq_enable_hw();				\
+			if (ipipe_virtual_irq_p(irq))			\
 				ipd->irqs[irq].handler(irq, ipd->irqs[irq].cookie); \
-				local_irq_disable_nohead(ipd);		\
-			} else						\
-				/*					\
-				 * No need to run the irqtail here either; \
-				 * we can't be preempted by hw IRQs, so	\
-				 * non-Linux IRQs cannot stack over the short \
-				 * thread wakeup code. Which in turn means \
-				 * that no irqtail condition could be pending \
-				 * for domains above Linux in the pipeline. \
-				 */					\
+			else						\
 				ipd->irqs[irq].handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs)); \
+			local_irq_disable_hw();				\
 		} else {						\
 			__clear_bit(IPIPE_SYNC_FLAG, &ipipe_cpudom_var(ipd, status)); \
 			local_irq_enable_nohead(ipd);			\
@@ -217,42 +205,24 @@
 
 int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc);
 
-#define IS_SYSIRQ(irq)		((irq) > IRQ_CORETMR && (irq) <= SYS_IRQS)
-#define IS_GPIOIRQ(irq)		((irq) >= GPIO_IRQ_BASE && (irq) < NR_IRQS)
-
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+#define IRQ_SYSTMR		IRQ_CORETMR
+#define IRQ_PRIOTMR		IRQ_CORETMR
+#else
 #define IRQ_SYSTMR		IRQ_TIMER0
 #define IRQ_PRIOTMR		CONFIG_IRQ_TIMER0
+#endif
 
-#if defined(CONFIG_BF531) || defined(CONFIG_BF532) || defined(CONFIG_BF533)
-#define PRIO_GPIODEMUX(irq)	CONFIG_PFA
-#elif defined(CONFIG_BF534) || defined(CONFIG_BF536) || defined(CONFIG_BF537)
-#define PRIO_GPIODEMUX(irq)	CONFIG_IRQ_PROG_INTA
-#elif defined(CONFIG_BF52x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PORTF_INTA ? CONFIG_IRQ_PORTF_INTA : \
-				 (irq) == IRQ_PORTG_INTA ? CONFIG_IRQ_PORTG_INTA : \
-				 (irq) == IRQ_PORTH_INTA ? CONFIG_IRQ_PORTH_INTA : \
-				 -1)
-#elif defined(CONFIG_BF561)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PROG0_INTA ? CONFIG_IRQ_PROG0_INTA : \
-				 (irq) == IRQ_PROG1_INTA ? CONFIG_IRQ_PROG1_INTA : \
-				 (irq) == IRQ_PROG2_INTA ? CONFIG_IRQ_PROG2_INTA : \
-				 -1)
+#ifdef CONFIG_BF561
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TMRS8_DISABLE(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TMRS8_ENABLE(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TMRS8_STATUS(val)
 #define bfin_read_TIMER_STATUS()	bfin_read_TMRS8_STATUS()
 #elif defined(CONFIG_BF54x)
-#define PRIO_GPIODEMUX(irq)	((irq) == IRQ_PINT0 ? CONFIG_IRQ_PINT0 : \
-				 (irq) == IRQ_PINT1 ? CONFIG_IRQ_PINT1 : \
-				 (irq) == IRQ_PINT2 ? CONFIG_IRQ_PINT2 : \
-				 (irq) == IRQ_PINT3 ? CONFIG_IRQ_PINT3 : \
-				 -1)
 #define bfin_write_TIMER_DISABLE(val)	bfin_write_TIMER_DISABLE0(val)
 #define bfin_write_TIMER_ENABLE(val)	bfin_write_TIMER_ENABLE0(val)
 #define bfin_write_TIMER_STATUS(val)	bfin_write_TIMER_STATUS0(val)
 #define bfin_read_TIMER_STATUS(val)	bfin_read_TIMER_STATUS0(val)
-#else
-# error "no PRIO_GPIODEMUX() for this part"
 #endif
 
 #define __ipipe_root_tick_p(regs)	((regs->ipend & 0x10) != 0)
@@ -275,4 +245,6 @@
 
 #endif /* !CONFIG_IPIPE */
 
+#define ipipe_update_tick_evtdev(evtdev)	do { } while (0)
+
 #endif	/* !__ASM_BLACKFIN_IPIPE_H */
diff --git a/arch/blackfin/include/asm/ipipe_base.h b/arch/blackfin/include/asm/ipipe_base.h
index cb1025a..3e8acbd 100644
--- a/arch/blackfin/include/asm/ipipe_base.h
+++ b/arch/blackfin/include/asm/ipipe_base.h
@@ -1,5 +1,5 @@
 /*   -*- linux-c -*-
- *   include/asm-blackfin/_baseipipe.h
+ *   include/asm-blackfin/ipipe_base.h
  *
  *   Copyright (C) 2007 Philippe Gerum.
  *
@@ -27,8 +27,9 @@
 #define IPIPE_NR_XIRQS		NR_IRQS
 #define IPIPE_IRQ_ISHIFT	5	/* 2^5 for 32bits arch. */
 
-/* Blackfin-specific, global domain flags */
-#define IPIPE_ROOTLOCK_FLAG	1	/* Lock pipeline for root */
+/* Blackfin-specific, per-cpu pipeline status */
+#define IPIPE_SYNCDEFER_FLAG	15
+#define IPIPE_SYNCDEFER_MASK	(1L << IPIPE_SYNCDEFER_MASK)
 
  /* Blackfin traps -- i.e. exception vector numbers */
 #define IPIPE_NR_FAULTS		52 /* We leave a gap after VEC_ILL_RES. */
@@ -48,11 +49,6 @@
 
 #ifndef __ASSEMBLY__
 
-#include <linux/bitops.h>
-
-extern int test_bit(int nr, const void *addr);
-
-
 extern unsigned long __ipipe_root_status; /* Alias to ipipe_root_cpudom_var(status) */
 
 static inline void __ipipe_stall_root(void)
diff --git a/arch/blackfin/include/asm/irq.h b/arch/blackfin/include/asm/irq.h
index 3d97790..7645e85 100644
--- a/arch/blackfin/include/asm/irq.h
+++ b/arch/blackfin/include/asm/irq.h
@@ -61,20 +61,38 @@
 #define raw_irqs_disabled_flags(flags)	(!irqs_enabled_from_flags_hw(flags))
 #define local_test_iflag_hw(x)		irqs_enabled_from_flags_hw(x)
 
-#define local_save_flags(x)						\
-	do {								\
-		(x) = __ipipe_test_root() ? \
+#define local_save_flags(x)					 \
+	do {							 \
+		(x) = __ipipe_test_root() ?			 \
 			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_save(x)				\
-	do {						\
-		(x) = __ipipe_test_and_stall_root();	\
+#define local_irq_save(x)					 \
+	do {						 	 \
+		(x) = __ipipe_test_and_stall_root() ?		 \
+			__all_masked_irq_flags : bfin_irq_flags; \
+		barrier();					 \
 	} while (0)
 
-#define local_irq_restore(x)	__ipipe_restore_root(x)
-#define local_irq_disable()	__ipipe_stall_root()
-#define local_irq_enable()	__ipipe_unstall_root()
+static inline void local_irq_restore(unsigned long x)
+{
+	barrier();
+	__ipipe_restore_root(x == __all_masked_irq_flags);
+}
+
+#define local_irq_disable()			\
+	do {					\
+		__ipipe_stall_root();		\
+		barrier();			\
+	} while (0)
+
+static inline void local_irq_enable(void)
+{
+	barrier();
+	__ipipe_unstall_root();
+}
+
 #define irqs_disabled()		__ipipe_test_root()
 
 #define local_save_flags_hw(x) \
diff --git a/arch/blackfin/include/asm/thread_info.h b/arch/blackfin/include/asm/thread_info.h
index e721ce5..2920087 100644
--- a/arch/blackfin/include/asm/thread_info.h
+++ b/arch/blackfin/include/asm/thread_info.h
@@ -122,6 +122,7 @@
 #define TIF_MEMDIE              4
 #define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
 #define TIF_FREEZE              6       /* is freezing for suspend */
+#define TIF_IRQ_SYNC            7       /* sync pipeline stage */
 
 /* as above, but as bit values */
 #define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
@@ -130,6 +131,7 @@
 #define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
 #define _TIF_RESTORE_SIGMASK	(1<<TIF_RESTORE_SIGMASK)
 #define _TIF_FREEZE             (1<<TIF_FREEZE)
+#define _TIF_IRQ_SYNC           (1<<TIF_IRQ_SYNC)
 
 #define _TIF_WORK_MASK		0x0000FFFE	/* work to do on interrupt/exception return */
 
diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile
index 4a92a86..fd4d432 100644
--- a/arch/blackfin/kernel/Makefile
+++ b/arch/blackfin/kernel/Makefile
@@ -15,13 +15,15 @@
     obj-y += time.o
 endif
 
-CFLAGS_kgdb_test.o := -mlong-calls -O0
-
 obj-$(CONFIG_IPIPE)                  += ipipe.o
 obj-$(CONFIG_IPIPE_TRACE_MCOUNT)     += mcount.o
 obj-$(CONFIG_BFIN_GPTIMERS)          += gptimers.o
 obj-$(CONFIG_CPLB_INFO)              += cplbinfo.o
 obj-$(CONFIG_MODULES)                += module.o
 obj-$(CONFIG_KGDB)                   += kgdb.o
-obj-$(CONFIG_KGDB_TESTCASE)          += kgdb_test.o
+obj-$(CONFIG_KGDB_TESTS)             += kgdb_test.o
 obj-$(CONFIG_EARLY_PRINTK)           += early_printk.o
+
+# the kgdb test puts code into L2 and without linker
+# relaxation, we need to force long calls to/from it
+CFLAGS_kgdb_test.o := -mlong-calls -O0
diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
index 0e28f75..d6c0677 100644
--- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c
+++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c
@@ -53,9 +53,13 @@
 
 	i_d = i_i = 0;
 
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
 	/* Set up the zero page.  */
 	d_tbl[i_d].addr = 0;
 	d_tbl[i_d++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+	i_tbl[i_i].addr = 0;
+	i_tbl[i_i++].data = SDRAM_OOPS | PAGE_SIZE_1KB;
+#endif
 
 	/* Cover kernel memory with 4M pages.  */
 	addr = 0;
diff --git a/arch/blackfin/kernel/ipipe.c b/arch/blackfin/kernel/ipipe.c
index 339be5a..a5de8d4 100644
--- a/arch/blackfin/kernel/ipipe.c
+++ b/arch/blackfin/kernel/ipipe.c
@@ -35,14 +35,8 @@
 #include <asm/atomic.h>
 #include <asm/io.h>
 
-static int create_irq_threads;
-
 DEFINE_PER_CPU(struct pt_regs, __ipipe_tick_regs);
 
-static DEFINE_PER_CPU(unsigned long, pending_irqthread_mask);
-
-static DEFINE_PER_CPU(int [IVG13 + 1], pending_irq_count);
-
 asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
 
 static void __ipipe_no_irqtail(void);
@@ -93,6 +87,7 @@
  */
 void __ipipe_handle_irq(unsigned irq, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
 	struct ipipe_domain *this_domain, *next_domain;
 	struct list_head *head, *pos;
 	int m_ack, s = -1;
@@ -104,7 +99,6 @@
 	 * interrupt.
 	 */
 	m_ack = (regs == NULL || irq == IRQ_SYSTMR || irq == IRQ_CORETMR);
-
 	this_domain = ipipe_current_domain;
 
 	if (unlikely(test_bit(IPIPE_STICKY_FLAG, &this_domain->irqs[irq].control)))
@@ -114,49 +108,28 @@
 		next_domain = list_entry(head, struct ipipe_domain, p_link);
 		if (likely(test_bit(IPIPE_WIRED_FLAG, &next_domain->irqs[irq].control))) {
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL)
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
-			if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-				s = __test_and_set_bit(IPIPE_STALL_FLAG,
-						       &ipipe_root_cpudom_var(status));
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
+			if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+				s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 			__ipipe_dispatch_wired(next_domain, irq);
-				goto finalize;
-			return;
+			goto out;
 		}
 	}
 
 	/* Ack the interrupt. */
 
 	pos = head;
-
 	while (pos != &__ipipe_pipeline) {
 		next_domain = list_entry(pos, struct ipipe_domain, p_link);
-		/*
-		 * For each domain handling the incoming IRQ, mark it
-		 * as pending in its log.
-		 */
 		if (test_bit(IPIPE_HANDLE_FLAG, &next_domain->irqs[irq].control)) {
-			/*
-			 * Domains that handle this IRQ are polled for
-			 * acknowledging it by decreasing priority
-			 * order. The interrupt must be made pending
-			 * _first_ in the domain's status flags before
-			 * the PIC is unlocked.
-			 */
 			__ipipe_set_irq_pending(next_domain, irq);
-
 			if (!m_ack && next_domain->irqs[irq].acknowledge != NULL) {
-				next_domain->irqs[irq].acknowledge(irq, irq_desc + irq);
+				next_domain->irqs[irq].acknowledge(irq, irq_to_desc(irq));
 				m_ack = 1;
 			}
 		}
-
-		/*
-		 * If the domain does not want the IRQ to be passed
-		 * down the interrupt pipe, exit the loop now.
-		 */
 		if (!test_bit(IPIPE_PASS_FLAG, &next_domain->irqs[irq].control))
 			break;
-
 		pos = next_domain->p_link.next;
 	}
 
@@ -166,18 +139,24 @@
 	 * immediately to the current domain if the interrupt has been
 	 * marked as 'sticky'. This search does not go beyond the
 	 * current domain in the pipeline. We also enforce the
-	 * additional root stage lock (blackfin-specific). */
+	 * additional root stage lock (blackfin-specific).
+	 */
+	if (test_bit(IPIPE_SYNCDEFER_FLAG, &p->status))
+		s = __test_and_set_bit(IPIPE_STALL_FLAG, &p->status);
 
-	if (test_bit(IPIPE_ROOTLOCK_FLAG, &ipipe_root_domain->flags))
-		s = __test_and_set_bit(IPIPE_STALL_FLAG,
-				       &ipipe_root_cpudom_var(status));
-finalize:
+	/*
+	 * If the interrupt preempted the head domain, then do not
+	 * even try to walk the pipeline, unless an interrupt is
+	 * pending for it.
+	 */
+	if (test_bit(IPIPE_AHEAD_FLAG, &this_domain->flags) &&
+	    ipipe_head_cpudom_var(irqpend_himask) == 0)
+		goto out;
 
 	__ipipe_walk_pipeline(head);
-
+out:
 	if (!s)
-		__clear_bit(IPIPE_STALL_FLAG,
-			    &ipipe_root_cpudom_var(status));
+		__clear_bit(IPIPE_STALL_FLAG, &p->status);
 }
 
 int __ipipe_check_root(void)
@@ -187,7 +166,7 @@
 
 void __ipipe_enable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	desc->depth = 0;
@@ -199,7 +178,7 @@
 
 void __ipipe_disable_irqdesc(struct ipipe_domain *ipd, unsigned irq)
 {
-	struct irq_desc *desc = irq_desc + irq;
+	struct irq_desc *desc = irq_to_desc(irq);
 	int prio = desc->ic_prio;
 
 	if (ipd != &ipipe_root &&
@@ -236,15 +215,18 @@
 {
 	unsigned long flags;
 
-	/* We need to run the IRQ tail hook whenever we don't
+	/*
+	 * We need to run the IRQ tail hook whenever we don't
 	 * propagate a syscall to higher domains, because we know that
 	 * important operations might be pending there (e.g. Xenomai
-	 * deferred rescheduling). */
+	 * deferred rescheduling).
+	 */
 
-	if (!__ipipe_syscall_watched_p(current, regs->orig_p0)) {
+	if (regs->orig_p0 < NR_syscalls) {
 		void (*hook)(void) = (void (*)(void))__ipipe_irq_tail_hook;
 		hook();
-		return 0;
+		if ((current->flags & PF_EVNOTIFY) == 0)
+			return 0;
 	}
 
 	/*
@@ -312,112 +294,46 @@
 {
 	unsigned long flags;
 
+#ifdef CONFIG_IPIPE_DEBUG
 	if (irq >= IPIPE_NR_IRQS ||
 	    (ipipe_virtual_irq_p(irq)
 	     && !test_bit(irq - IPIPE_VIRQ_BASE, &__ipipe_virtual_irq_map)))
 		return -EINVAL;
+#endif
 
 	local_irq_save_hw(flags);
-
 	__ipipe_handle_irq(irq, NULL);
-
 	local_irq_restore_hw(flags);
 
 	return 1;
 }
 
-/* Move Linux IRQ to threads. */
-
-static int do_irqd(void *__desc)
+asmlinkage void __ipipe_sync_root(void)
 {
-	struct irq_desc *desc = __desc;
-	unsigned irq = desc - irq_desc;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
-	cpumask_t cpumask;
+	unsigned long flags;
 
-	sigfillset(&current->blocked);
-	current->flags |= PF_NOFREEZE;
-	cpumask = cpumask_of_cpu(cpu);
-	set_cpus_allowed(current, cpumask);
-	ipipe_setscheduler_root(current, SCHED_FIFO, 50 + thrprio);
+	BUG_ON(irqs_disabled());
 
-	while (!kthread_should_stop()) {
-		local_irq_disable();
-		if (!(desc->status & IRQ_SCHEDULED)) {
-			set_current_state(TASK_INTERRUPTIBLE);
-resched:
-			local_irq_enable();
-			schedule();
-			local_irq_disable();
-		}
-		__set_current_state(TASK_RUNNING);
-		/*
-		 * If higher priority interrupt servers are ready to
-		 * run, reschedule immediately. We need this for the
-		 * GPIO demux IRQ handler to unmask the interrupt line
-		 * _last_, after all GPIO IRQs have run.
-		 */
-		if (per_cpu(pending_irqthread_mask, cpu) & ~(thrmask|(thrmask-1)))
-			goto resched;
-		if (--per_cpu(pending_irq_count[thrprio], cpu) == 0)
-			per_cpu(pending_irqthread_mask, cpu) &= ~thrmask;
-		desc->status &= ~IRQ_SCHEDULED;
-		desc->thr_handler(irq, &__raw_get_cpu_var(__ipipe_tick_regs));
-		local_irq_enable();
-	}
-	__set_current_state(TASK_RUNNING);
-	return 0;
+	local_irq_save_hw(flags);
+
+	clear_thread_flag(TIF_IRQ_SYNC);
+
+	if (ipipe_root_cpudom_var(irqpend_himask) != 0)
+		__ipipe_sync_pipeline(IPIPE_IRQMASK_ANY);
+
+	local_irq_restore_hw(flags);
 }
 
-static void kick_irqd(unsigned irq, void *cookie)
+void ___ipipe_sync_pipeline(unsigned long syncmask)
 {
-	struct irq_desc *desc = irq_desc + irq;
-	int thrprio = desc->thr_prio;
-	int thrmask = 1 << thrprio;
-	int cpu = smp_processor_id();
+	struct ipipe_domain *ipd = ipipe_current_domain;
 
-	if (!(desc->status & IRQ_SCHEDULED)) {
-		desc->status |= IRQ_SCHEDULED;
-		per_cpu(pending_irqthread_mask, cpu) |= thrmask;
-		++per_cpu(pending_irq_count[thrprio], cpu);
-		wake_up_process(desc->thread);
-	}
-}
-
-int ipipe_start_irq_thread(unsigned irq, struct irq_desc *desc)
-{
-	if (desc->thread || !create_irq_threads)
-		return 0;
-
-	desc->thread = kthread_create(do_irqd, desc, "IRQ %d", irq);
-	if (desc->thread == NULL) {
-		printk(KERN_ERR "irqd: could not create IRQ thread %d!\n", irq);
-		return -ENOMEM;
+	if (ipd == ipipe_root_domain) {
+		if (test_bit(IPIPE_SYNCDEFER_FLAG, &ipipe_root_cpudom_var(status)))
+			return;
 	}
 
-	wake_up_process(desc->thread);
-
-	desc->thr_handler = ipipe_root_domain->irqs[irq].handler;
-	ipipe_root_domain->irqs[irq].handler = &kick_irqd;
-
-	return 0;
-}
-
-void __init ipipe_init_irq_threads(void)
-{
-	unsigned irq;
-	struct irq_desc *desc;
-
-	create_irq_threads = 1;
-
-	for (irq = 0; irq < NR_IRQS; irq++) {
-		desc = irq_desc + irq;
-		if (desc->action != NULL ||
-			(desc->status & IRQ_NOREQUEST) != 0)
-			ipipe_start_irq_thread(irq, desc);
-	}
+	__ipipe_sync_stage(syncmask);
 }
 
 EXPORT_SYMBOL(show_stack);
diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c
index 75724ee..7fd1265 100644
--- a/arch/blackfin/kernel/irqchip.c
+++ b/arch/blackfin/kernel/irqchip.c
@@ -144,11 +144,15 @@
 #endif
 	generic_handle_irq(irq);
 
-#ifndef CONFIG_IPIPE	/* Useless and bugous over the I-pipe: IRQs are threaded. */
-	/* If we're the only interrupt running (ignoring IRQ15 which is for
-	   syscalls), lower our priority to IRQ14 so that softirqs run at
-	   that level.  If there's another, lower-level interrupt, irq_exit
-	   will defer softirqs to that.  */
+#ifndef CONFIG_IPIPE
+	/*
+	 * If we're the only interrupt running (ignoring IRQ15 which
+	 * is for syscalls), lower our priority to IRQ14 so that
+	 * softirqs run at that level.  If there's another,
+	 * lower-level interrupt, irq_exit will defer softirqs to
+	 * that. If the interrupt pipeline is enabled, we are already
+	 * running at IRQ14 priority, so we don't need this code.
+	 */
 	CSYNC();
 	pending = bfin_read_IPEND() & ~0x8000;
 	other_ints = pending & (pending - 1);
diff --git a/arch/blackfin/kernel/kgdb_test.c b/arch/blackfin/kernel/kgdb_test.c
index 3dba9c1..dbcf3e4 100644
--- a/arch/blackfin/kernel/kgdb_test.c
+++ b/arch/blackfin/kernel/kgdb_test.c
@@ -20,6 +20,7 @@
 static char cmdline[256];
 static unsigned long len;
 
+#ifndef CONFIG_SMP
 static int num1 __attribute__((l1_data));
 
 void kgdb_l1_test(void) __attribute__((l1_text));
@@ -32,6 +33,8 @@
 	printk(KERN_ALERT "L1(after change) : data variable addr = 0x%p, data value is %d\n", &num1, num1);
 	return ;
 }
+#endif
+
 #if L2_LENGTH
 
 static int num2 __attribute__((l2));
@@ -59,10 +62,12 @@
 static int test_proc_output(char *buf)
 {
 	kgdb_test("hello world!", 12, 0x55, 0x10);
+#ifndef CONFIG_SMP
 	kgdb_l1_test();
-	#if L2_LENGTH
+#endif
+#if L2_LENGTH
 	kgdb_l2_test();
-	#endif
+#endif
 
 	return 0;
 }
diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c
index 594e325b..d76618d 100644
--- a/arch/blackfin/kernel/ptrace.c
+++ b/arch/blackfin/kernel/ptrace.c
@@ -45,6 +45,7 @@
 #include <asm/asm-offsets.h>
 #include <asm/dma.h>
 #include <asm/fixed_code.h>
+#include <asm/cacheflush.h>
 #include <asm/mem_map.h>
 
 #define TEXT_OFFSET 0
@@ -240,7 +241,7 @@
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(tmp) <= FIXED_CODE_END) {
-				memcpy(&tmp, (const void *)(addr), sizeof(tmp));
+				copy_from_user_page(0, 0, 0, &tmp, (const void *)(addr), sizeof(tmp));
 				copied = sizeof(tmp);
 
 			} else
@@ -320,7 +321,7 @@
 
 			} else if (addr >= FIXED_CODE_START
 			    && addr + sizeof(data) <= FIXED_CODE_END) {
-				memcpy((void *)(addr), &data, sizeof(data));
+				copy_to_user_page(0, 0, 0, (void *)(addr), &data, sizeof(data));
 				copied = sizeof(data);
 
 			} else
diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c
index e5c1162..a58687b 100644
--- a/arch/blackfin/kernel/setup.c
+++ b/arch/blackfin/kernel/setup.c
@@ -889,6 +889,10 @@
 			       CPU, bfin_revid());
 	}
 
+	/* We can't run on BF548-0.1 due to ANOMALY 05000448 */
+	if (bfin_cpuid() == 0x27de && bfin_revid() == 1)
+		panic("You can't run on this processor due to 05000448\n");
+
 	printk(KERN_INFO "Blackfin Linux support by http://blackfin.uclinux.org/\n");
 
 	printk(KERN_INFO "Processor Speed: %lu MHz core clock and %lu MHz System Clock\n",
@@ -1141,12 +1145,12 @@
 		icache_size = 0;
 
 	seq_printf(m, "cache size\t: %d KB(L1 icache) "
-		"%d KB(L1 dcache-%s) %d KB(L2 cache)\n",
+		"%d KB(L1 dcache%s) %d KB(L2 cache)\n",
 		icache_size, dcache_size,
 #if defined CONFIG_BFIN_WB
-		"wb"
+		"-wb"
 #elif defined CONFIG_BFIN_WT
-		"wt"
+		"-wt"
 #endif
 		"", 0);
 
diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c
index 172b4c58..1bbacfb 100644
--- a/arch/blackfin/kernel/time.c
+++ b/arch/blackfin/kernel/time.c
@@ -134,7 +134,10 @@
 
 	write_seqlock(&xtime_lock);
 #if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE)
-/* FIXME: Here TIMIL0 is not set when IPIPE enabled, why? */
+	/*
+	 * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is
+	 * enabled.
+	 */
 	if (get_gptimer_status(0) & TIMER_STATUS_TIMIL0) {
 #endif
 		do_timer(1);
diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 0e17534..41f2eac 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -113,7 +113,6 @@
 	.name = "bfin_mac",
 	.dev.platform_data = &bfin_mii_bus,
 };
-#endif
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 static struct dsa_platform_data ksz8893m_switch_data = {
@@ -132,6 +131,7 @@
 	.dev.platform_data = &ksz8893m_switch_data,
 };
 #endif
+#endif
 
 #if defined(CONFIG_MTD_M25P80) \
 	|| defined(CONFIG_MTD_M25P80_MODULE)
@@ -171,6 +171,7 @@
 };
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 /* SPI SWITCH CHIP */
@@ -179,10 +180,11 @@
 	.bits_per_word = 8,
 };
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -259,6 +261,7 @@
 	},
 #endif
 
+#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 #if defined(CONFIG_NET_DSA_KSZ8893M) \
 	|| defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	{
@@ -271,24 +274,15 @@
 		.mode = SPI_MODE_3,
 	},
 #endif
+#endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
@@ -630,11 +624,10 @@
 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 	&bfin_mii_bus,
 	&bfin_mac_device,
-#endif
-
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
 	&ksz8893m_switch_device,
 #endif
+#endif
 
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
diff --git a/arch/blackfin/mach-bf518/include/mach/anomaly.h b/arch/blackfin/mach-bf518/include/mach/anomaly.h
index e5b4bef..c847bb1 100644
--- a/arch/blackfin/mach-bf518/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf518/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf518/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - ????
+ *  - Revision B, 02/03/2009; ADSP-BF512/BF514/BF516/BF518 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -19,6 +19,8 @@
 #define ANOMALY_05000122 (1)
 /* False Hardware Error from an Access in the Shadow of a Conditional Branch */
 #define ANOMALY_05000245 (1)
+/* Incorrect Timer Pulse Width in Single-Shot PWM_OUT Mode with External Clock */
+#define ANOMALY_05000254 (1)
 /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
 #define ANOMALY_05000265 (1)
 /* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
@@ -53,6 +55,12 @@
 #define ANOMALY_05000443 (1)
 /* Incorrect L1 Instruction Bank B Memory Map Location */
 #define ANOMALY_05000444 (1)
+/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
+#define ANOMALY_05000452 (1)
+/* PWM_TRIPB Signal Not Available on PG10 */
+#define ANOMALY_05000453 (1)
+/* PPI_FS3 is Driven One Half Cycle Later Than PPI Data */
+#define ANOMALY_05000455 (1)
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -65,15 +73,20 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (0)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (0)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
index b50a63b..e21c1c3 100644
--- a/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf518/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index 856c097..48e69ee 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -487,9 +487,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -585,23 +585,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/boards/ezbrd.c b/arch/blackfin/mach-bf527/boards/ezbrd.c
index 83606fc..7fe480e 100644
--- a/arch/blackfin/mach-bf527/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf527/boards/ezbrd.c
@@ -256,9 +256,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -366,23 +366,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index 035e8d8..df6808d 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf527/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -167,12 +167,16 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
 #define ANOMALY_05000285 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000312 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000363 (0)
 #define ANOMALY_05000412 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index 75722d6..e8c41fd 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	 CH_UART0_TX,
 	 CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART0_CTS_PIN,
 	 CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	 CH_UART1_TX,
 	 CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	 CONFIG_UART1_CTS_PIN,
 	 CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 308c98d..8d8b3e7 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -38,9 +38,4 @@
 	help
 	  Core support for IP04/IP04 open hardware IP-PBX.
 
-config GENERIC_BF533_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index 9afbe72..ff1e832 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf533/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF533_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
index 015c18f..0765872 100644
--- a/arch/blackfin/mach-bf533/boards/blackstamp.c
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -101,9 +101,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -129,23 +129,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index e7061c7..e897487 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -96,9 +96,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -138,23 +138,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c
deleted file mode 100644
index 986eeec..0000000
--- a/arch/blackfin/mach-bf533/boards/generic_board.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf533/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:      2005
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices, ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf533/boards/ip0x.c b/arch/blackfin/mach-bf533/boards/ip0x.c
index e30b1b7..f19b6337 100644
--- a/arch/blackfin/mach-bf533/boards/ip0x.c
+++ b/arch/blackfin/mach-bf533/boards/ip0x.c
@@ -127,8 +127,8 @@
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 /* all SPI peripherals info goes here */
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
 /*
  * CPOL (Clock Polarity)
  *  0 - Active high SCK
@@ -152,14 +152,13 @@
 /* Notice: for blackfin, the speed_hz is the value of register
  * SPI_BAUD, not the real baudrate */
 static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 2,
 		.bus_num = 1,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf533/include/mach/anomaly.h b/arch/blackfin/mach-bf533/include/mach/anomaly.h
index 0d3a034..1cf893e 100644
--- a/arch/blackfin/mach-bf533/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf533/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf533/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -160,7 +160,7 @@
 #define ANOMALY_05000301 (__SILICON_REVISION__ < 6)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (__SILICON_REVISION__ < 5)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* New Feature: Additional PPI Frame Sync Sampling Options (Not Available On Older Silicon) */
 #define ANOMALY_05000306 (__SILICON_REVISION__ < 5)
@@ -278,9 +278,12 @@
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
index f3d9e49..5f517f5 100644
--- a/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf533/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig
index 42a57b0..77c59da 100644
--- a/arch/blackfin/mach-bf537/boards/Kconfig
+++ b/arch/blackfin/mach-bf537/boards/Kconfig
@@ -33,9 +33,4 @@
 	help
 	  Board supply package for CSP Minotaur
 
-config GENERIC_BF537_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 7168cc1..68b98a7a 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf537/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF537_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN537_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_CM)   += cm_bf537.o
 obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM)  += tcm_bf537.o
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c
index 9cd8fb2..41c75b9 100644
--- a/arch/blackfin/mach-bf537/boards/cm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c
@@ -108,9 +108,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 1,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c
deleted file mode 100644
index da710fd..0000000
--- a/arch/blackfin/mach-bf537/boards/generic_board.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf537/boards/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
-#include <linux/irq.h>
-#include <linux/interrupt.h>
-#include <linux/usb/sl811.h>
-#include <asm/dma.h>
-#include <asm/bfin5xx_spi.h>
-#include <asm/reboot.h>
-#include <asm/portmux.h>
-#include <linux/spi/ad7877.h>
-
-/*
- * Name the Board for the /proc/cpuinfo
- */
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-#include <linux/usb/isp1760.h>
-static struct resource bfin_isp1760_resources[] = {
-	[0] = {
-		.start  = 0x203C0000,
-		.end    = 0x203C0000 + 0x000fffff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_PF7,
-		.end    = IRQ_PF7,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct isp1760_platform_data isp1760_priv = {
-	.is_isp1761 = 0,
-	.port1_disable = 0,
-	.bus_width_16 = 1,
-	.port1_otg = 0,
-	.analog_oc = 0,
-	.dack_polarity_high = 0,
-	.dreq_polarity_high = 0,
-};
-
-static struct platform_device bfin_isp1760_device = {
-	.name           = "isp1760-hcd",
-	.id             = 0,
-	.dev = {
-		.platform_data = &isp1760_priv,
-	},
-	.num_resources  = ARRAY_SIZE(bfin_isp1760_resources),
-	.resource       = bfin_isp1760_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-static struct resource bfin_pcmcia_cf_resources[] = {
-	{
-		.start = 0x20310000, /* IO PORT */
-		.end = 0x20312000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20311000, /* Attribute Memory */
-		.end = 0x20311FFF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF4,
-		.end = IRQ_PF4,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	}, {
-		.start = 6, /* Card Detect PF6 */
-		.end = 6,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pcmcia_cf_device = {
-	.name = "bfin_cf_pcmcia",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources),
-	.resource = bfin_pcmcia_cf_resources,
-};
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-static struct platform_device rtc_device = {
-	.name = "rtc-bfin",
-	.id   = -1,
-};
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.name = "smc91x-regs",
-		.start = 0x20300300,
-		.end = 0x20300300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-static struct resource dm9000_resources[] = {
-	[0] = {
-		.start	= 0x203FB800,
-		.end	= 0x203FB800 + 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0x203FB800 + 4,
-		.end	= 0x203FB800 + 5,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= IRQ_PF9,
-		.end	= IRQ_PF9,
-		.flags	= (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
-	},
-};
-
-static struct platform_device dm9000_device = {
-	.name		= "dm9000",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(dm9000_resources),
-	.resource	= dm9000_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-static struct resource sl811_hcd_resources[] = {
-	{
-		.start = 0x20340000,
-		.end = 0x20340000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20340004,
-		.end = 0x20340004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_SL811_BFIN_IRQ,
-		.end = CONFIG_USB_SL811_BFIN_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-void sl811_port_power(struct device *dev, int is_on)
-{
-	gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS");
-	gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on);
-
-}
-#endif
-
-static struct sl811_platform_data sl811_priv = {
-	.potpg = 10,
-	.power = 250,       /* == 500mA */
-#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS)
-	.port_power = &sl811_port_power,
-#endif
-};
-
-static struct platform_device sl811_hcd_device = {
-	.name = "sl811-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &sl811_priv,
-	},
-	.num_resources = ARRAY_SIZE(sl811_hcd_resources),
-	.resource = sl811_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
-	{
-		.start = 0x20360000,
-		.end = 0x20360000,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0x20360004,
-		.end = 0x20360004,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct isp1362_platform_data isp1362_priv = {
-	.sel15Kres = 1,
-	.clknotstop = 0,
-	.oc_enable = 0,
-	.int_act_high = 0,
-	.int_edge_triggered = 0,
-	.remote_wakeup_connected = 0,
-	.no_power_switching = 1,
-	.power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
-	.name = "isp1362-hcd",
-	.id = 0,
-	.dev = {
-		.platform_data = &isp1362_priv,
-	},
-	.num_resources = ARRAY_SIZE(isp1362_hcd_resources),
-	.resource = isp1362_hcd_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-static struct platform_device bfin_mii_bus = {
-	.name = "bfin_mii_bus",
-};
-
-static struct platform_device bfin_mac_device = {
-	.name = "bfin_mac",
-	.dev.platform_data = &bfin_mii_bus,
-};
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-static struct resource net2272_bfin_resources[] = {
-	{
-		.start = 0x20300000,
-		.end = 0x20300000 + 0x100,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PF7,
-		.end = IRQ_PF7,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device net2272_bfin_device = {
-	.name = "net2272",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(net2272_bfin_resources),
-	.resource = net2272_bfin_resources,
-};
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-static struct mtd_partition bfin_spi_flash_partitions[] = {
-	{
-		.name = "bootloader(spi)",
-		.size = 0x00020000,
-		.offset = 0,
-		.mask_flags = MTD_CAP_ROM
-	}, {
-		.name = "linux kernel(spi)",
-		.size = 0xe0000,
-		.offset = 0x20000
-	}, {
-		.name = "file system(spi)",
-		.size = 0x700000,
-		.offset = 0x00100000,
-	}
-};
-
-static struct flash_platform_data bfin_spi_flash_data = {
-	.name = "m25p80",
-	.parts = bfin_spi_flash_partitions,
-	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
-	.type = "m25p64",
-};
-
-/* SPI flash chip (m25p64) */
-static struct bfin5xx_spi_chip spi_flash_chip_info = {
-	.enable_dma = 0,         /* use dma transfer with this chip*/
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-/* SPI ADC chip */
-static struct bfin5xx_spi_chip spi_adc_chip_info = {
-	.enable_dma = 1,         /* use dma transfer with this chip*/
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-#endif
-
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
-	.bits_per_word = 8,
-};
-#endif
-
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
-	.ctl_reg	= 0x4, /* send zero */
-	.enable_dma	= 0,
-	.bits_per_word	= 8,
-	.cs_change_per_word = 1,
-};
-#endif
-
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-	.enable_dma = 0,
-	.bits_per_word = 16,
-};
-
-static const struct ad7877_platform_data bfin_ad7877_ts_info = {
-	.model			= 7877,
-	.vref_delay_usecs	= 50,	/* internal, no capacitor */
-	.x_plate_ohms		= 419,
-	.y_plate_ohms		= 486,
-	.pressure_max		= 1000,
-	.pressure_min		= 0,
-	.stopacq_polarity 	= 1,
-	.first_conversion_delay = 3,
-	.acquisition_time 	= 1,
-	.averaging 		= 1,
-	.pen_down_acc_interval 	= 1,
-};
-#endif
-
-static struct spi_board_info bfin_spi_board_info[] __initdata = {
-#if defined(CONFIG_MTD_M25P80) \
-	|| defined(CONFIG_MTD_M25P80_MODULE)
-	{
-		/* the modalias must be the same as spi device driver name */
-		.modalias = "m25p80", /* Name of spi_driver for this device */
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
-		.platform_data = &bfin_spi_flash_data,
-		.controller_data = &spi_flash_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
-	{
-		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
-		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. */
-		.platform_data = NULL, /* No spi_driver specific config */
-		.controller_data = &spi_adc_chip_info,
-	},
-#endif
-
-#if defined(CONFIG_SND_BLACKFIN_AD1836) \
-	|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
-	{
-		.modalias = "ad1836-spi",
-		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
-		.controller_data = &ad1836_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
-	{
-		.modalias = "ad9960-spi",
-		.max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 1,
-		.controller_data = &ad9960_spi_chip_info,
-	},
-#endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-	{
-		.modalias = "spi_mmc_dummy",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_PBX)
-	{
-		.modalias = "fxs-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J11_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "fxo-spi",
-		.max_speed_hz = 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = 8 - CONFIG_J19_JUMPER,
-		.controller_data = &spi_si3xxx_chip_info,
-		.mode = SPI_MODE_3,
-	},
-#endif
-#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
-	{
-		.modalias		= "ad7877",
-		.platform_data		= &bfin_ad7877_ts_info,
-		.irq			= IRQ_PF6,
-		.max_speed_hz	= 12500000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num	= 0,
-		.chip_select  = 1,
-		.controller_data = &spi_ad7877_chip_info,
-	},
-#endif
-};
-
-/* SPI controller data */
-static struct bfin5xx_spi_master bfin_spi0_info = {
-	.num_chipselect = 8,
-	.enable_dma = 1,  /* master has the ability to do dma transfer */
-	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
-};
-
-/* SPI (0) */
-static struct resource bfin_spi0_resource[] = {
-	[0] = {
-		.start = SPI0_REGBASE,
-		.end   = SPI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-		},
-	[1] = {
-		.start = CH_SPI,
-		.end   = CH_SPI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_spi0_device = {
-	.name = "bfin-spi",
-	.id = 0, /* Bus number */
-	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
-	.resource = bfin_spi0_resource,
-	.dev = {
-		.platform_data = &bfin_spi0_info, /* Passed to driver */
-	},
-};
-#endif  /* spi master and devices */
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
-	.name = "bf537-lq035",
-};
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-static struct platform_device bfin_fb_adv7393_device = {
-	.name = "bfin-adv7393",
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-static struct resource bfin_uart_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device bfin_uart_device = {
-	.name = "bfin-uart",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_uart_resources),
-	.resource = bfin_uart_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#ifdef CONFIG_BFIN_SIR1
-static struct resource bfin_sir1_resources[] = {
-	{
-		.start = 0xFFC02000,
-		.end = 0xFFC020FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART1_RX,
-		.end = IRQ_UART1_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART1_RX,
-		.end = CH_UART1_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir1_device = {
-	.name = "bfin_sir",
-	.id = 1,
-	.num_resources = ARRAY_SIZE(bfin_sir1_resources),
-	.resource = bfin_sir1_resources,
-};
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-static struct resource bfin_twi0_resource[] = {
-	[0] = {
-		.start = TWI0_REGBASE,
-		.end   = TWI0_REGBASE + 0xFF,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_TWI,
-		.end   = IRQ_TWI,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device i2c_bfin_twi_device = {
-	.name = "i2c-bfin-twi",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_twi0_resource),
-	.resource = bfin_twi0_resource,
-};
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-static struct platform_device bfin_sport0_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 0,
-};
-
-static struct platform_device bfin_sport1_uart_device = {
-	.name = "bfin-sport-uart",
-	.id = 1,
-};
-#endif
-
-static struct platform_device *stamp_devices[] __initdata = {
-#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE)
-	&bfin_pcmcia_cf_device,
-#endif
-
-#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
-	&rtc_device,
-#endif
-
-#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
-	&sl811_hcd_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-	&isp1362_hcd_device,
-#endif
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
-	&dm9000_device,
-#endif
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-	&bfin_mii_bus,
-	&bfin_mac_device,
-#endif
-
-#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
-	&net2272_bfin_device,
-#endif
-
-#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
-	&bfin_isp1760_device,
-#endif
-
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	&bfin_spi0_device,
-#endif
-
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-	&bfin_fb_device,
-#endif
-
-#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE)
-	&bfin_fb_adv7393_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
-	&bfin_uart_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#ifdef CONFIG_BFIN_SIR1
-	&bfin_sir1_device,
-#endif
-#endif
-
-#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
-	&i2c_bfin_twi_device,
-#endif
-
-#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
-	&bfin_sport0_uart_device,
-	&bfin_sport1_uart_device,
-#endif
-};
-
-static int __init generic_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-	spi_register_board_info(bfin_spi_board_info,
-				ARRAY_SIZE(bfin_spi_board_info));
-#endif
-
-	return 0;
-}
-
-arch_initcall(generic_init);
-
-void native_machine_restart(char *cmd)
-{
-	/* workaround reboot hang when booting from SPI */
-	if ((bfin_read_SYSCR() & 0x7) == 0x3)
-		bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
-}
-
-#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
-void bfin_get_ether_addr(char *addr)
-{
-	random_ether_addr(addr);
-	printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
-}
-EXPORT_SYMBOL(bfin_get_ether_addr);
-#endif
diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c
index db7d3a3..3c15981 100644
--- a/arch/blackfin/mach-bf537/boards/minotaur.c
+++ b/arch/blackfin/mach-bf537/boards/minotaur.c
@@ -134,9 +134,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -156,23 +156,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 0,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 5000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c
index 590eb3a..4e1de1e 100644
--- a/arch/blackfin/mach-bf537/boards/pnav10.c
+++ b/arch/blackfin/mach-bf537/boards/pnav10.c
@@ -289,9 +289,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -364,23 +364,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
index 3f4f203..53ad10f 100644
--- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c
+++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c
@@ -108,9 +108,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -160,23 +160,13 @@
 	},
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc_dummy",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = 7,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
-		.mode = SPI_MODE_3,
-	},
-	{
-		.modalias = "spi_mmc",
-		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
-		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/anomaly.h b/arch/blackfin/mach-bf537/include/mach/anomaly.h
index 9cb3912..1bfd80c 100644
--- a/arch/blackfin/mach-bf537/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf537/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf537/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -110,7 +110,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
 #define ANOMALY_05000304 (__SILICON_REVISION__ < 3)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 3)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 3)
@@ -168,9 +168,12 @@
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
index b3f87e1..9e34700 100644
--- a/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf537/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/anomaly.h b/arch/blackfin/mach-bf538/include/mach/anomaly.h
index e130b4f..3a56998 100644
--- a/arch/blackfin/mach-bf538/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf538/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf538/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -120,13 +120,17 @@
 #define ANOMALY_05000198 (0)
 #define ANOMALY_05000230 (0)
 #define ANOMALY_05000263 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
 #define ANOMALY_05000353 (1)
 #define ANOMALY_05000363 (0)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000412 (0)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
index 40503b6..3c2811e 100644
--- a/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf538/include/mach/bfin_serial_5xx.h
@@ -144,7 +144,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -158,7 +158,7 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
-#ifdef CONFIG_BFIN_UART1_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART1_CTS_PIN,
 	CONFIG_UART1_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-bf548/include/mach/anomaly.h b/arch/blackfin/mach-bf548/include/mach/anomaly.h
index 23d03c5..882e40c 100644
--- a/arch/blackfin/mach-bf548/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf548/include/mach/anomaly.h
@@ -2,12 +2,12 @@
  * File: include/asm-blackfin/mach-bf548/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
 /* This file shoule be up to date with:
- *  - Revision G, 08/07/2008; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
+ *  - Revision H, 01/16/2009; ADSP-BF542/BF544/BF547/BF548/BF549 Blackfin Processor Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
@@ -91,8 +91,6 @@
 #define ANOMALY_05000371 (__SILICON_REVISION__ < 2)
 /* USB DP/DM Data Pins May Lose State When Entering Hibernate */
 #define ANOMALY_05000372 (__SILICON_REVISION__ < 1)
-/* Mobile DDR Operation Not Functional */
-#define ANOMALY_05000377 (1)
 /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
 #define ANOMALY_05000378 (__SILICON_REVISION__ < 2)
 /* 16-Bit NAND FLASH Boot Mode Is Not Functional */
@@ -157,8 +155,22 @@
 #define ANOMALY_05000429 (__SILICON_REVISION__ < 2)
 /* Software System Reset Corrupts PLL_LOCKCNT Register */
 #define ANOMALY_05000430 (__SILICON_REVISION__ >= 2)
+/* Incorrect Use of Stack in Lockbox Firmware During Authentication */
+#define ANOMALY_05000431 (__SILICON_REVISION__ < 3)
+/* OTP Write Accesses Not Supported */
+#define ANOMALY_05000442 (__SILICON_REVISION__ < 1)
 /* IFLUSH Instruction at End of Hardware Loop Causes Infinite Stall */
 #define ANOMALY_05000443 (1)
+/* CDMAPRIO and L2DMAPRIO Bits in the SYSCR Register Are Not Functional */
+#define ANOMALY_05000446 (1)
+/* UART IrDA Receiver Fails on Extended Bit Pulses */
+#define ANOMALY_05000447 (1)
+/* DDR Clock Duty Cycle Spec Violation (tCH, tCL) */
+#define ANOMALY_05000448 (__SILICON_REVISION__ == 1)
+/* Reduced Timing Margins on DDR Output Setup and Hold (tDS and tDH) */
+#define ANOMALY_05000449 (__SILICON_REVISION__ == 1)
+/* USB DMA Mode 1 Short Packet Data Corruption */
+#define ANOMALY_05000450 (1
 
 /* Anomalies that don't exist on this proc */
 #define ANOMALY_05000125 (0)
@@ -171,6 +183,8 @@
 #define ANOMALY_05000263 (0)
 #define ANOMALY_05000266 (0)
 #define ANOMALY_05000273 (0)
+#define ANOMALY_05000278 (0)
+#define ANOMALY_05000305 (0)
 #define ANOMALY_05000307 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000323 (0)
diff --git a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
index e4cf35e..c05e79c 100644
--- a/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf548/include/mach/bfin_serial_5xx.h
@@ -63,7 +63,7 @@
 #define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
 #define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
 
-#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART2_CTSRTS)
 # define CONFIG_SERIAL_BFIN_CTSRTS
 
 # ifndef CONFIG_UART0_CTS_PIN
@@ -74,12 +74,12 @@
 #  define CONFIG_UART0_RTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_CTS_PIN
-#  define CONFIG_UART1_CTS_PIN -1
+# ifndef CONFIG_UART2_CTS_PIN
+#  define CONFIG_UART2_CTS_PIN -1
 # endif
 
-# ifndef CONFIG_UART1_RTS_PIN
-#  define CONFIG_UART1_RTS_PIN -1
+# ifndef CONFIG_UART2_RTS_PIN
+#  define CONFIG_UART2_RTS_PIN -1
 # endif
 #endif
 
@@ -130,7 +130,7 @@
 	CH_UART0_TX,
 	CH_UART0_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
@@ -144,6 +144,10 @@
 	CH_UART1_TX,
 	CH_UART1_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 #ifdef CONFIG_SERIAL_BFIN_UART2
@@ -154,7 +158,7 @@
 	CH_UART2_TX,
 	CH_UART2_RX,
 #endif
-#ifdef CONFIG_BFIN_UART2_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART2_CTS_PIN,
 	CONFIG_UART2_RTS_PIN,
 #endif
@@ -168,6 +172,10 @@
 	CH_UART3_TX,
 	CH_UART3_RX,
 #endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+	0,
+	0,
+#endif
 	},
 #endif
 };
diff --git a/arch/blackfin/mach-bf548/include/mach/irq.h b/arch/blackfin/mach-bf548/include/mach/irq.h
index 60299a7..f194625 100644
--- a/arch/blackfin/mach-bf548/include/mach/irq.h
+++ b/arch/blackfin/mach-bf548/include/mach/irq.h
@@ -123,8 +123,8 @@
 #define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
 #define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
 #define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_EPPI1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPPI2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
 #define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
 #define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
 #define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
@@ -361,8 +361,8 @@
 #define IRQ_UART2_ERR 		IRQ_UART2_ERROR
 #define IRQ_CAN0_ERR  		IRQ_CAN0_ERROR
 #define IRQ_MXVR_ERR  		IRQ_MXVR_ERROR
-#define IRQ_EPP1_ERR  		IRQ_EPP1_ERROR
-#define IRQ_EPP2_ERR  		IRQ_EPP2_ERROR
+#define IRQ_EPPI1_ERR  		IRQ_EPPI1_ERROR
+#define IRQ_EPPI2_ERR  		IRQ_EPPI2_ERROR
 #define IRQ_UART3_ERR 		IRQ_UART3_ERROR
 #define IRQ_HOST_ERR  		IRQ_HOST_ERROR
 #define IRQ_PIXC_ERR  		IRQ_PIXC_ERROR
diff --git a/arch/blackfin/mach-bf561/boards/Kconfig b/arch/blackfin/mach-bf561/boards/Kconfig
index e41a67b..e4bc6d7 100644
--- a/arch/blackfin/mach-bf561/boards/Kconfig
+++ b/arch/blackfin/mach-bf561/boards/Kconfig
@@ -19,9 +19,4 @@
 	help
 	  CM-BF561 support for EVAL- and DEV-Board.
 
-config GENERIC_BF561_BOARD
-	bool "Generic"
-	help
-	  Generic or Custom board support.
-
 endchoice
diff --git a/arch/blackfin/mach-bf561/boards/Makefile b/arch/blackfin/mach-bf561/boards/Makefile
index 04add01..3a15255 100644
--- a/arch/blackfin/mach-bf561/boards/Makefile
+++ b/arch/blackfin/mach-bf561/boards/Makefile
@@ -2,7 +2,6 @@
 # arch/blackfin/mach-bf561/boards/Makefile
 #
 
-obj-$(CONFIG_GENERIC_BF561_BOARD)      += generic_board.o
 obj-$(CONFIG_BFIN561_BLUETECHNIX_CM)   += cm_bf561.o
 obj-$(CONFIG_BFIN561_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN561_TEPLA)            += tepla.o
diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c
index 6880d1e..f623c6b 100644
--- a/arch/blackfin/mach-bf561/boards/cm_bf561.c
+++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c
@@ -105,9 +105,9 @@
 };
 #endif
 
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
-static struct bfin5xx_spi_chip spi_mmc_chip_info = {
-	.enable_dma = 1,
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+static struct bfin5xx_spi_chip mmc_spi_chip_info = {
+	.enable_dma = 0,
 	.bits_per_word = 8,
 };
 #endif
@@ -155,14 +155,13 @@
 		.controller_data = &ad9960_spi_chip_info,
 	},
 #endif
-#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
-		.modalias = "spi_mmc",
+		.modalias = "mmc_spi",
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0,
-		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
-		.platform_data = NULL,
-		.controller_data = &spi_mmc_chip_info,
+		.chip_select = 5,
+		.controller_data = &mmc_spi_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c
deleted file mode 100644
index 0ba366a..0000000
--- a/arch/blackfin/mach-bf561/boards/generic_board.c
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * File:         arch/blackfin/mach-bf561/generic_board.c
- * Based on:     arch/blackfin/mach-bf533/ezkit.c
- * Author:       Aidan Williams <aidan@nicta.com.au>
- *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2005 National ICT Australia (NICTA)
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-
-const char bfin_board_name[] = "UNKNOWN BOARD";
-
-/*
- *  Driver needs to know address, irq and flag pin.
- */
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-static struct resource smc91x_resources[] = {
-	{
-		.start = 0x2C010300,
-		.end = 0x2C010300 + 16,
-		.flags = IORESOURCE_MEM,
-	}, {
-		.start = IRQ_PROG_INTB,
-		.end = IRQ_PROG_INTB,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	}, {
-		.start = IRQ_PF9,
-		.end = IRQ_PF9,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
-	},
-};
-
-static struct platform_device smc91x_device = {
-	.name = "smc91x",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(smc91x_resources),
-	.resource = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-static struct resource bfin_sir0_resources[] = {
-	{
-		.start = 0xFFC00400,
-		.end = 0xFFC004FF,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = IRQ_UART0_RX,
-		.end = IRQ_UART0_RX+1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.start = CH_UART0_RX,
-		.end = CH_UART0_RX+1,
-		.flags = IORESOURCE_DMA,
-	},
-};
-
-static struct platform_device bfin_sir0_device = {
-	.name = "bfin_sir",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(bfin_sir0_resources),
-	.resource = bfin_sir0_resources,
-};
-#endif
-#endif
-
-static struct platform_device *generic_board_devices[] __initdata = {
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-	&smc91x_device,
-#endif
-
-#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
-#ifdef CONFIG_BFIN_SIR0
-	&bfin_sir0_device,
-#endif
-#endif
-};
-
-static int __init generic_board_init(void)
-{
-	printk(KERN_INFO "%s(): registering device resources\n", __func__);
-	return platform_add_devices(generic_board_devices,
-				    ARRAY_SIZE(generic_board_devices));
-}
-
-arch_initcall(generic_board_init);
diff --git a/arch/blackfin/mach-bf561/include/mach/anomaly.h b/arch/blackfin/mach-bf561/include/mach/anomaly.h
index 1a9e175..d0b0b35 100644
--- a/arch/blackfin/mach-bf561/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf561/include/mach/anomaly.h
@@ -2,7 +2,7 @@
  * File: include/asm-blackfin/mach-bf561/anomaly.h
  * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * Copyright (C) 2004-2008 Analog Devices Inc.
+ * Copyright (C) 2004-2009 Analog Devices Inc.
  * Licensed under the GPL-2 or later.
  */
 
@@ -224,7 +224,7 @@
 #define ANOMALY_05000301 (1)
 /* SSYNCs After Writes To DMA MMR Registers May Not Be Handled Correctly */
 #define ANOMALY_05000302 (1)
-/* New Feature: Additional Hysteresis on SPORT Input Pins (Not Available On Older Silicon) */
+/* SPORT_HYS Bit in PLL_CTL Register Is Not Functional */
 #define ANOMALY_05000305 (__SILICON_REVISION__ < 5)
 /* SCKELOW Bit Does Not Maintain State Through Hibernate */
 #define ANOMALY_05000307 (__SILICON_REVISION__ < 5)
@@ -283,8 +283,11 @@
 #define ANOMALY_05000273 (0)
 #define ANOMALY_05000311 (0)
 #define ANOMALY_05000353 (1)
+#define ANOMALY_05000380 (0)
 #define ANOMALY_05000386 (1)
 #define ANOMALY_05000432 (0)
 #define ANOMALY_05000435 (0)
+#define ANOMALY_05000447 (0)
+#define ANOMALY_05000448 (0)
 
 #endif
diff --git a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
index 043bfcf..ca8c5f6 100644
--- a/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf561/include/mach/bfin_serial_5xx.h
@@ -134,7 +134,7 @@
 	CH_UART_TX,
 	CH_UART_RX,
 #endif
-#ifdef CONFIG_BFIN_UART0_CTSRTS
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	CONFIG_UART0_CTS_PIN,
 	CONFIG_UART0_RTS_PIN,
 #endif
diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c
index 98133b9..80d39b2 100644
--- a/arch/blackfin/mach-common/arch_checks.c
+++ b/arch/blackfin/mach-common/arch_checks.c
@@ -62,3 +62,12 @@
 #if (CONFIG_BOOT_LOAD & 0x3)
 # error "The kernel load address must be 4 byte aligned"
 #endif
+
+/* The entire kernel must be able to make a 24bit pcrel call to start of L1 */
+#if ((0xffffffff - L1_CODE_START + 1) + CONFIG_BOOT_LOAD) > 0x1000000
+# error "The kernel load address is too high; keep it below 10meg for safety"
+#endif
+
+#if ANOMALY_05000448
+# error You are using a part with anomaly 05000448, this issue causes random memory read/write failures - that means random crashes.
+#endif
diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S
index 3c98dac..aa0648c 100644
--- a/arch/blackfin/mach-common/cache.S
+++ b/arch/blackfin/mach-common/cache.S
@@ -66,11 +66,33 @@
 
 /* Invalidate all instruction cache lines assocoiated with this memory area */
 ENTRY(_blackfin_icache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush IFLUSH, , nop
 ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
+/*
+ * Walkaround to avoid loading wrong instruction after invalidating icache
+ * and following sequence is met.
+ *
+ * 1) One instruction address is cached in the instruction cache.
+ * 2) This instruction in SDRAM is changed.
+ * 3) IFLASH[P0] is executed only once in blackfin_icache_flush_range().
+ * 4) This instruction is executed again, but the old one is loaded.
+ */
+	P0 = R0;
+	IFLUSH[P0];
 	do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c
index 9dddb6f..3539365 100644
--- a/arch/blackfin/mach-common/clocks-init.c
+++ b/arch/blackfin/mach-common/clocks-init.c
@@ -17,7 +17,7 @@
 #define SDGCTL_WIDTH (1 << 31)	/* SDRAM external data path width */
 #define PLL_CTL_VAL \
 	(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
-	 (PLL_BYPASS << 8) | (ANOMALY_05000265 ? 0x8000 : 0))
+	 (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
 
 __attribute__((l1_text))
 static void do_sync(void)
diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S
index 4da50bc..8009a51 100644
--- a/arch/blackfin/mach-common/dpmc_modes.S
+++ b/arch/blackfin/mach-common/dpmc_modes.S
@@ -376,10 +376,22 @@
 #endif
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_PUSH(PINT0_MASK_SET)
+	PM_SYS_PUSH(PINT1_MASK_SET)
+	PM_SYS_PUSH(PINT2_MASK_SET)
+	PM_SYS_PUSH(PINT3_MASK_SET)
 	PM_SYS_PUSH(PINT0_ASSIGN)
 	PM_SYS_PUSH(PINT1_ASSIGN)
 	PM_SYS_PUSH(PINT2_ASSIGN)
 	PM_SYS_PUSH(PINT3_ASSIGN)
+	PM_SYS_PUSH(PINT0_INVERT_SET)
+	PM_SYS_PUSH(PINT1_INVERT_SET)
+	PM_SYS_PUSH(PINT2_INVERT_SET)
+	PM_SYS_PUSH(PINT3_INVERT_SET)
+	PM_SYS_PUSH(PINT0_EDGE_SET)
+	PM_SYS_PUSH(PINT1_EDGE_SET)
+	PM_SYS_PUSH(PINT2_EDGE_SET)
+	PM_SYS_PUSH(PINT3_EDGE_SET)
 #endif
 
 	PM_SYS_PUSH(EBIU_AMBCTL0)
@@ -714,10 +726,22 @@
 	PM_SYS_POP(EBIU_AMBCTL0)
 
 #ifdef PINT0_ASSIGN
+	PM_SYS_POP(PINT3_EDGE_SET)
+	PM_SYS_POP(PINT2_EDGE_SET)
+	PM_SYS_POP(PINT1_EDGE_SET)
+	PM_SYS_POP(PINT0_EDGE_SET)
+	PM_SYS_POP(PINT3_INVERT_SET)
+	PM_SYS_POP(PINT2_INVERT_SET)
+	PM_SYS_POP(PINT1_INVERT_SET)
+	PM_SYS_POP(PINT0_INVERT_SET)
 	PM_SYS_POP(PINT3_ASSIGN)
 	PM_SYS_POP(PINT2_ASSIGN)
 	PM_SYS_POP(PINT1_ASSIGN)
 	PM_SYS_POP(PINT0_ASSIGN)
+	PM_SYS_POP(PINT3_MASK_SET)
+	PM_SYS_POP(PINT2_MASK_SET)
+	PM_SYS_POP(PINT1_MASK_SET)
+	PM_SYS_POP(PINT0_MASK_SET)
 #endif
 
 #ifdef SICA_IWR1
diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S
index 88de053..21e65a3 100644
--- a/arch/blackfin/mach-common/entry.S
+++ b/arch/blackfin/mach-common/entry.S
@@ -600,6 +600,19 @@
 	p2 = [p2];
 
 	[p2+(TASK_THREAD+THREAD_KSP)] = sp;
+#ifdef CONFIG_IPIPE
+	r0 = sp;
+	SP += -12;
+	call ___ipipe_syscall_root;
+	SP += 12;
+	cc = r0 == 1;
+	if cc jump .Lsyscall_really_exit;
+	cc = r0 == -1;
+	if cc jump .Lresume_userspace;
+	r3 = [sp + PT_R3];
+	r4 = [sp + PT_R4];
+	p0 = [sp + PT_ORIG_P0];
+#endif /* CONFIG_IPIPE */
 
 	/* Check the System Call */
 	r7 = __NR_syscall;
@@ -654,6 +667,17 @@
 	r7 =  r7 & r4;
 
 .Lsyscall_resched:
+#ifdef CONFIG_IPIPE
+	cc = BITTST(r7, TIF_IRQ_SYNC);
+	if !cc jump .Lsyscall_no_irqsync;
+	[--sp] = reti;
+	r0 = [sp++];
+	SP += -12;
+	call ___ipipe_sync_root;
+	SP += 12;
+	jump .Lresume_userspace_1;
+.Lsyscall_no_irqsync:
+#endif
 	cc = BITTST(r7, TIF_NEED_RESCHED);
 	if !cc jump .Lsyscall_sigpending;
 
@@ -685,6 +709,10 @@
 .Lsyscall_really_exit:
 	r5 = [sp + PT_RESERVED];
 	rets = r5;
+#ifdef CONFIG_IPIPE
+	[--sp] = reti;
+	r5 = [sp++];
+#endif /* CONFIG_IPIPE */
 	rts;
 ENDPROC(_system_call)
 
@@ -771,6 +799,15 @@
 ENDPROC(_resume)
 
 ENTRY(_ret_from_exception)
+#ifdef CONFIG_IPIPE
+	[--sp] = rets;
+	SP += -12;
+	call ___ipipe_check_root
+	SP += 12
+	rets = [sp++];
+	cc = r0 == 0;
+	if cc jump 4f;                /* not on behalf of Linux, get out */
+#endif /* CONFIG_IPIPE */
 	p2.l = lo(IPEND);
 	p2.h = hi(IPEND);
 
@@ -827,6 +864,28 @@
 	rts;
 ENDPROC(_ret_from_exception)
 
+#ifdef CONFIG_IPIPE
+
+_sync_root_irqs:
+	[--sp] = reti;		/* Reenable interrupts */
+	r0 = [sp++];
+	jump.l ___ipipe_sync_root
+
+_resume_kernel_from_int:
+	r0.l = _sync_root_irqs
+	r0.h = _sync_root_irqs
+	[--sp] = rets;
+	[--sp] = ( r7:4, p5:3 );
+	SP += -12;
+	call ___ipipe_call_irqtail
+	SP += 12;
+	( r7:4, p5:3 ) = [sp++];
+	rets = [sp++];
+	rts
+#else
+#define _resume_kernel_from_int	 2f
+#endif
+
 ENTRY(_return_from_int)
 	/* If someone else already raised IRQ 15, do nothing.  */
 	csync;
@@ -848,7 +907,7 @@
 	r1 = r0 - r1;
 	r2 = r0 & r1;
 	cc = r2 == 0;
-	if !cc jump 2f;
+	if !cc jump _resume_kernel_from_int;
 
 	/* Lower the interrupt level to 15.  */
 	p0.l = lo(EVT15);
diff --git a/arch/blackfin/mach-common/interrupt.S b/arch/blackfin/mach-common/interrupt.S
index 43c4eb9..0069c2d 100644
--- a/arch/blackfin/mach-common/interrupt.S
+++ b/arch/blackfin/mach-common/interrupt.S
@@ -235,6 +235,7 @@
 
 #ifdef CONFIG_IPIPE
 ENTRY(___ipipe_call_irqtail)
+	p0 = r0;
 	r0.l = 1f;
 	r0.h = 1f;
 	reti = r0;
@@ -242,9 +243,6 @@
 1:
 	[--sp] = rets;
 	[--sp] = ( r7:4, p5:3 );
-	p0.l = ___ipipe_irq_tail_hook;
-	p0.h = ___ipipe_irq_tail_hook;
-	p0 = [p0];
 	sp += -12;
 	call (p0);
 	sp += 12;
@@ -259,7 +257,7 @@
 	p0.h = hi(EVT14);
 	[p0] = r0;
 	csync;
-	r0 = 0x401f;
+	r0 = 0x401f (z);
 	sti r0;
 	raise 14;
 	[--sp] = reti;          /* IRQs on. */
@@ -277,11 +275,7 @@
 	p0.h = _bfin_irq_flags;
 	r0 = [p0];
 	sti r0;
-#if 0 /* FIXME: this actually raises scheduling latencies */
-	/* Reenable interrupts */
-	[--sp] = reti;
-	r0 = [sp++];
-#endif
 	rts;
 ENDPROC(___ipipe_call_irqtail)
+
 #endif /* CONFIG_IPIPE */
diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c
index 2024945..a7d7b2d 100644
--- a/arch/blackfin/mach-common/ints-priority.c
+++ b/arch/blackfin/mach-common/ints-priority.c
@@ -161,11 +161,15 @@
 
 static void bfin_internal_mask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
 			     ~(1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
@@ -175,15 +179,20 @@
 			     ~(1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 static void bfin_internal_unmask_irq(unsigned int irq)
 {
+	unsigned long flags;
+
 #ifdef CONFIG_BF53x
+	local_irq_save_hw(flags);
 	bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
 			     (1 << SIC_SYSIRQ(irq)));
 #else
 	unsigned mask_bank, mask_bit;
+	local_irq_save_hw(flags);
 	mask_bank = SIC_SYSIRQ(irq) / 32;
 	mask_bit = SIC_SYSIRQ(irq) % 32;
 	bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
@@ -193,6 +202,7 @@
 			     (1 << mask_bit));
 #endif
 #endif
+	local_irq_restore_hw(flags);
 }
 
 #ifdef CONFIG_PM
@@ -390,7 +400,7 @@
 static inline void bfin_set_irq_handler(unsigned irq, irq_flow_handler_t handle)
 {
 #ifdef CONFIG_IPIPE
-	_set_irq_handler(irq, handle_edge_irq);
+	_set_irq_handler(irq, handle_level_irq);
 #else
 	struct irq_desc *desc = irq_desc + irq;
 	/* May not call generic set_irq_handler() due to spinlock
@@ -1055,13 +1065,18 @@
 #endif
 		default:
 #ifdef CONFIG_IPIPE
-	/*
-	 * We want internal interrupt sources to be masked, because
-	 * ISRs may trigger interrupts recursively (e.g. DMA), but
-	 * interrupts are _not_ masked at CPU level. So let's handle
-	 * them as level interrupts.
-	 */
-			set_irq_handler(irq, handle_level_irq);
+			/*
+			 * We want internal interrupt sources to be
+			 * masked, because ISRs may trigger interrupts
+			 * recursively (e.g. DMA), but interrupts are
+			 * _not_ masked at CPU level. So let's handle
+			 * most of them as level interrupts, except
+			 * the timer interrupt which is special.
+			 */
+			if (irq == IRQ_SYSTMR || irq == IRQ_CORETMR)
+				set_irq_handler(irq, handle_simple_irq);
+			else
+				set_irq_handler(irq, handle_level_irq);
 #else /* !CONFIG_IPIPE */
 			set_irq_handler(irq, handle_simple_irq);
 #endif /* !CONFIG_IPIPE */
@@ -1123,9 +1138,8 @@
 
 #ifdef CONFIG_IPIPE
 	for (irq = 0; irq < NR_IRQS; irq++) {
-		struct irq_desc *desc = irq_desc + irq;
+		struct irq_desc *desc = irq_to_desc(irq);
 		desc->ic_prio = __ipipe_get_irq_priority(irq);
-		desc->thr_prio = __ipipe_get_irqthread_priority(irq);
 	}
 #endif /* CONFIG_IPIPE */
 
@@ -1208,76 +1222,21 @@
 	return IVG15;
 }
 
-int __ipipe_get_irqthread_priority(unsigned irq)
-{
-	int ient, prio;
-	int demux_irq;
-
-	/* The returned priority value is rescaled to [0..IVG13+1]
-	 * with 0 being the lowest effective priority level. */
-
-	if (irq <= IRQ_CORETMR)
-		return IVG13 - irq + 1;
-
-	/* GPIO IRQs are given the priority of the demux
-	 * interrupt. */
-	if (IS_GPIOIRQ(irq)) {
-#if defined(CONFIG_BF54x)
-		u32 bank = PINT_2_BANK(irq2pint_lut[irq - SYS_IRQS]);
-		demux_irq = (bank == 0 ? IRQ_PINT0 :
-				bank == 1 ? IRQ_PINT1 :
-				bank == 2 ? IRQ_PINT2 :
-				IRQ_PINT3);
-#elif defined(CONFIG_BF561)
-		demux_irq = (irq >= IRQ_PF32 ? IRQ_PROG2_INTA :
-				irq >= IRQ_PF16 ? IRQ_PROG1_INTA :
-				IRQ_PROG0_INTA);
-#elif defined(CONFIG_BF52x)
-		demux_irq = (irq >= IRQ_PH0 ? IRQ_PORTH_INTA :
-				irq >= IRQ_PG0 ? IRQ_PORTG_INTA :
-				IRQ_PORTF_INTA);
-#else
-		demux_irq = irq;
-#endif
-		return IVG13 - PRIO_GPIODEMUX(demux_irq) + 1;
-	}
-
-	/* The GPIO demux interrupt is given a lower priority
-	 * than the GPIO IRQs, so that its threaded handler
-	 * unmasks the interrupt line after the decoded IRQs
-	 * have been processed. */
-	prio = PRIO_GPIODEMUX(irq);
-	/* demux irq? */
-	if (prio != -1)
-		return IVG13 - prio;
-
-	for (ient = 0; ient < NR_PERI_INTS; ient++) {
-		struct ivgx *ivg = ivg_table + ient;
-		if (ivg->irqno == irq) {
-			for (prio = 0; prio <= IVG13-IVG7; prio++) {
-				if (ivg7_13[prio].ifirst <= ivg &&
-				    ivg7_13[prio].istop > ivg)
-					return IVG7 - prio;
-			}
-		}
-	}
-
-	return 0;
-}
-
 /* Hw interrupts are disabled on entry (check SAVE_CONTEXT). */
 #ifdef CONFIG_DO_IRQ_L1
 __attribute__((l1_text))
 #endif
 asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs)
 {
+	struct ipipe_percpu_domain_data *p = ipipe_root_cpudom_ptr();
+	struct ipipe_domain *this_domain = ipipe_current_domain;
 	struct ivgx *ivg_stop = ivg7_13[vec-IVG7].istop;
 	struct ivgx *ivg = ivg7_13[vec-IVG7].ifirst;
-	int irq;
+	int irq, s;
 
 	if (likely(vec == EVT_IVTMR_P)) {
 		irq = IRQ_CORETMR;
-		goto handle_irq;
+		goto core_tick;
 	}
 
 	SSYNC();
@@ -1319,24 +1278,39 @@
 	irq = ivg->irqno;
 
 	if (irq == IRQ_SYSTMR) {
+#ifdef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#else
 		bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */
+#endif
 		/* This is basically what we need from the register frame. */
 		__raw_get_cpu_var(__ipipe_tick_regs).ipend = regs->ipend;
 		__raw_get_cpu_var(__ipipe_tick_regs).pc = regs->pc;
-		if (!ipipe_root_domain_p)
-			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
-		else
+		if (this_domain != ipipe_root_domain)
 			__raw_get_cpu_var(__ipipe_tick_regs).ipend &= ~0x10;
+		else
+			__raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10;
 	}
 
-handle_irq:
+#ifndef CONFIG_GENERIC_CLOCKEVENTS
+core_tick:
+#endif
+	if (this_domain == ipipe_root_domain) {
+		s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+		barrier();
+	}
 
 	ipipe_trace_irq_entry(irq);
 	__ipipe_handle_irq(irq, regs);
-       ipipe_trace_irq_exit(irq);
+	ipipe_trace_irq_exit(irq);
 
-       if (ipipe_root_domain_p)
-		return !test_bit(IPIPE_STALL_FLAG, &ipipe_root_cpudom_var(status));
+	if (this_domain == ipipe_root_domain) {
+		set_thread_flag(TIF_IRQ_SYNC);
+		if (!s) {
+			__clear_bit(IPIPE_SYNCDEFER_FLAG, &p->status);
+			return !test_bit(IPIPE_STALL_FLAG, &p->status);
+		}
+	}
 
        return 0;
 }
diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c
index 77c9928..93eab61 100644
--- a/arch/blackfin/mach-common/smp.c
+++ b/arch/blackfin/mach-common/smp.c
@@ -158,10 +158,14 @@
 			kfree(msg);
 			break;
 		case BFIN_IPI_CALL_FUNC:
+			spin_unlock(&msg_queue->lock);
 			ipi_call_function(cpu, msg);
+			spin_lock(&msg_queue->lock);
 			break;
 		case BFIN_IPI_CPU_STOP:
+			spin_unlock(&msg_queue->lock);
 			ipi_cpu_stop(cpu);
+			spin_lock(&msg_queue->lock);
 			kfree(msg);
 			break;
 		default:
@@ -457,7 +461,7 @@
 	smp_flush_data.start = start;
 	smp_flush_data.end = end;
 
-	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
+	if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 0))
 		printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
 }
 EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c
index d0532b7..9c3629b 100644
--- a/arch/blackfin/mm/init.c
+++ b/arch/blackfin/mm/init.c
@@ -104,7 +104,7 @@
 	}
 }
 
-asmlinkage void init_pda(void)
+asmlinkage void __init init_pda(void)
 {
 	unsigned int cpu = raw_smp_processor_id();
 
diff --git a/arch/ia64/sn/pci/pcibr/pcibr_dma.c b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
index e626e50..060df4a 100644
--- a/arch/ia64/sn/pci/pcibr/pcibr_dma.c
+++ b/arch/ia64/sn/pci/pcibr/pcibr_dma.c
@@ -135,11 +135,10 @@
 	if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
 		pci_addr = IS_PIC_SOFT(pcibus_info) ?
 				PHYS_TO_DMA(paddr) :
-		    		PHYS_TO_TIODMA(paddr) | dma_attributes;
+				PHYS_TO_TIODMA(paddr);
 	else
-		pci_addr = IS_PIC_SOFT(pcibus_info) ?
-				paddr :
-				paddr | dma_attributes;
+		pci_addr = paddr;
+	pci_addr |= dma_attributes;
 
 	/* Handle Bus mode */
 	if (IS_PCIX(pcibus_info))
diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c
index d01a5d2..db90254 100644
--- a/arch/m68knommu/platform/5206e/config.c
+++ b/arch/m68knommu/platform/5206e/config.c
@@ -17,6 +17,7 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfdma.h>
+#include <asm/mcfuart.h>
 
 /***************************************************************************/
 
diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c
index dfdb5c2e..44baeb2 100644
--- a/arch/m68knommu/platform/528x/config.c
+++ b/arch/m68knommu/platform/528x/config.c
@@ -24,7 +24,6 @@
 #include <asm/coldfire.h>
 #include <asm/mcfsim.h>
 #include <asm/mcfuart.h>
-#include <asm/mcfqspi.h>
 
 #ifdef CONFIG_MTD_PARTITIONS
 #include <linux/mtd/partitions.h>
@@ -33,233 +32,6 @@
 /***************************************************************************/
 
 void coldfire_reset(void);
-static void coldfire_qspi_cs_control(u8 cs, u8 command);
-
-/***************************************************************************/
-
-#if defined(CONFIG_SPI)
-
-#if defined(CONFIG_WILDFIRE)
-#define SPI_NUM_CHIPSELECTS 	0x02
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x18
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		16
-#define FLASH_TYPE		"m25p80"
-
-#define M25P80_CS		0
-#define MMC_CS			1
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "stm25p80",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-
-#endif
-
-#elif defined(CONFIG_WILDFIREMOD)
-
-#define SPI_NUM_CHIPSELECTS	0x08
-#define SPI_PAR_VAL		0x07  /* Enable DIN, DOUT, CLK */
-#define SPI_CS_MASK		0x78
-
-#define FLASH_BLOCKSIZE		(1024*64)
-#define FLASH_NUMBLOCKS		64
-#define FLASH_TYPE		"m25p32"
-/* Reserve 1M for the kernel parition */
-#define FLASH_KERNEL_SIZE   (1024 * 1024)
-
-#define M25P80_CS		5
-#define MMC_CS			6
-
-#ifdef CONFIG_MTD_PARTITIONS
-static struct mtd_partition stm25p_partitions[] = {
-	/* sflash */
-	[0] = {
-		.name = "kernel",
-		.offset = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.size = FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[1] = {
-		.name = "image",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS - FLASH_KERNEL_SIZE,
-		.mask_flags = 0
-	},
-	[2] = {
-		.name = "all",
-		.offset = 0x00000000,
-		.size = FLASH_BLOCKSIZE * FLASH_NUMBLOCKS,
-		.mask_flags = 0
-	}
-};
-#endif
-
-#else
-#define SPI_NUM_CHIPSELECTS 	0x04
-#define SPI_PAR_VAL		0x7F  /* Enable DIN, DOUT, CLK, CS0 - CS4 */
-#endif
-
-#ifdef MMC_CS
-static struct coldfire_spi_chip flash_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0
-};
-
-static struct coldfire_spi_chip mmc_chip_info = {
-	.mode = SPI_MODE_0,
-	.bits_per_word = 16,
-	.del_cs_to_clk = 17,
-	.del_after_trans = 1,
-	.void_write_data = 0xFFFF
-};
-#endif
-
-#ifdef M25P80_CS
-static struct flash_platform_data stm25p80_platform_data = {
-	.name = "ST M25P80 SPI Flash chip",
-#ifdef CONFIG_MTD_PARTITIONS
-	.parts = stm25p_partitions,
-	.nr_parts = sizeof(stm25p_partitions) / sizeof(*stm25p_partitions),
-#endif
-	.type = FLASH_TYPE
-};
-#endif
-
-static struct spi_board_info spi_board_info[] __initdata = {
-#ifdef M25P80_CS
-	{
-		.modalias = "m25p80",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = M25P80_CS,
-		.platform_data = &stm25p80_platform_data,
-		.controller_data = &flash_chip_info
-	},
-#endif
-#ifdef MMC_CS
-	{
-		.modalias = "mmc_spi",
-		.max_speed_hz = 16000000,
-		.bus_num = 1,
-		.chip_select = MMC_CS,
-		.controller_data = &mmc_chip_info
-	}
-#endif
-};
-
-static struct coldfire_spi_master coldfire_master_info = {
-	.bus_num = 1,
-	.num_chipselect = SPI_NUM_CHIPSELECTS,
-	.irq_source = MCF5282_QSPI_IRQ_SOURCE,
-	.irq_vector = MCF5282_QSPI_IRQ_VECTOR,
-	.irq_mask = ((0x01 << MCF5282_QSPI_IRQ_SOURCE) | 0x01),
-	.irq_lp = 0x2B,  /* Level 5 and Priority 3 */
-	.par_val = SPI_PAR_VAL,
-	.cs_control = coldfire_qspi_cs_control,
-};
-
-static struct resource coldfire_spi_resources[] = {
-	[0] = {
-		.name = "qspi-par",
-		.start = MCF5282_QSPI_PAR,
-		.end = MCF5282_QSPI_PAR,
-		.flags = IORESOURCE_MEM
-	},
-
-	[1] = {
-		.name = "qspi-module",
-		.start = MCF5282_QSPI_QMR,
-		.end = MCF5282_QSPI_QMR + 0x18,
-		.flags = IORESOURCE_MEM
-	},
-
-	[2] = {
-		.name = "qspi-int-level",
-		.start = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.end = MCF5282_INTC0 + MCFINTC_ICR0 + MCF5282_QSPI_IRQ_SOURCE,
-		.flags = IORESOURCE_MEM
-	},
-
-	[3] = {
-		.name = "qspi-int-mask",
-		.start = MCF5282_INTC0 + MCFINTC_IMRL,
-		.end = MCF5282_INTC0 + MCFINTC_IMRL,
-		.flags = IORESOURCE_MEM
-	}
-};
-
-static struct platform_device coldfire_spi = {
-	.name = "spi_coldfire",
-	.id = -1,
-	.resource = coldfire_spi_resources,
-	.num_resources = ARRAY_SIZE(coldfire_spi_resources),
-	.dev = {
-		.platform_data = &coldfire_master_info,
-	}
-};
-
-static void coldfire_qspi_cs_control(u8 cs, u8 command)
-{
-	u8 cs_bit = ((0x01 << cs) << 3) & SPI_CS_MASK;
-
-#if defined(CONFIG_WILDFIRE)
-	u8 cs_mask = ~(((0x01 << cs) << 3) & SPI_CS_MASK);
-#endif
-#if defined(CONFIG_WILDFIREMOD)
-	u8 cs_mask = (cs << 3) & SPI_CS_MASK;
-#endif
-
-	/*
-	 * Don't do anything if the chip select is not
-	 * one of the port qs pins.
-	 */
-	if (command & QSPI_CS_INIT) {
-#if defined(CONFIG_WILDFIRE)
-		MCF5282_GPIO_DDRQS  |= cs_bit;
-		MCF5282_GPIO_PQSPAR &= ~cs_bit;
-#endif
-
-#if defined(CONFIG_WILDFIREMOD)
-		MCF5282_GPIO_DDRQS  |= SPI_CS_MASK;
-		MCF5282_GPIO_PQSPAR &= ~SPI_CS_MASK;
-#endif
-	}
-
-	if (command & QSPI_CS_ASSERT) {
-		MCF5282_GPIO_PORTQS &= ~SPI_CS_MASK;
-		MCF5282_GPIO_PORTQS |= cs_mask;
-	} else if (command & QSPI_CS_DROP) {
-		MCF5282_GPIO_PORTQS |= SPI_CS_MASK;
-	}
-}
-
-static int __init spi_dev_init(void)
-{
-	int retval;
-
-	retval = platform_device_register(&coldfire_spi);
-	if (retval < 0)
-		return retval;
-
-	if (ARRAY_SIZE(spi_board_info))
-		retval = spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
-
-	return retval;
-}
-
-#endif /* CONFIG_SPI */
 
 /***************************************************************************/
 
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index ac5d541..6c5b409 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,6 +3,8 @@
 /*
  * Architecture specific compatibility types
  */
+#include <linux/seccomp.h>
+#include <linux/thread_info.h>
 #include <linux/types.h>
 #include <asm/page.h>
 #include <asm/ptrace.h>
@@ -218,4 +220,9 @@
 	compat_ulong_t	__unused2;
 };
 
+static inline int is_compat_task(void)
+{
+	return test_thread_flag(TIF_32BIT);
+}
+
 #endif /* _ASM_COMPAT_H */
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 72da416..15b6d45 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -22,6 +22,7 @@
 #include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_gpio.h>
+#include <media/soc_camera.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
 #include <video/sh_mobile_lcdc.h>
diff --git a/arch/x86/include/asm/efi.h b/arch/x86/include/asm/efi.h
index ca5ffb2..edc90f2 100644
--- a/arch/x86/include/asm/efi.h
+++ b/arch/x86/include/asm/efi.h
@@ -37,8 +37,6 @@
 
 #else /* !CONFIG_X86_32 */
 
-#define MAX_EFI_IO_PAGES	100
-
 extern u64 efi_call0(void *fp);
 extern u64 efi_call1(void *fp, u64 arg1);
 extern u64 efi_call2(void *fp, u64 arg1, u64 arg2);
diff --git a/arch/x86/include/asm/fixmap_64.h b/arch/x86/include/asm/fixmap_64.h
index 00a30ab9..8be7409 100644
--- a/arch/x86/include/asm/fixmap_64.h
+++ b/arch/x86/include/asm/fixmap_64.h
@@ -16,7 +16,6 @@
 #include <asm/apicdef.h>
 #include <asm/page.h>
 #include <asm/vsyscall.h>
-#include <asm/efi.h>
 
 /*
  * Here we define all the compile-time 'special' virtual
@@ -43,9 +42,6 @@
 	FIX_APIC_BASE,	/* local (CPU) APIC) -- required for SMP or not */
 	FIX_IO_APIC_BASE_0,
 	FIX_IO_APIC_BASE_END = FIX_IO_APIC_BASE_0 + MAX_IO_APICS - 1,
-	FIX_EFI_IO_MAP_LAST_PAGE,
-	FIX_EFI_IO_MAP_FIRST_PAGE = FIX_EFI_IO_MAP_LAST_PAGE
-				  + MAX_EFI_IO_PAGES - 1,
 #ifdef CONFIG_PARAVIRT
 	FIX_PARAVIRT_BOOTMAP,
 #endif
diff --git a/arch/x86/include/asm/i387.h b/arch/x86/include/asm/i387.h
index 48f0004..71c9e51 100644
--- a/arch/x86/include/asm/i387.h
+++ b/arch/x86/include/asm/i387.h
@@ -172,7 +172,13 @@
 
 #else  /* CONFIG_X86_32 */
 
-extern void finit(void);
+#ifdef CONFIG_MATH_EMULATION
+extern void finit_task(struct task_struct *tsk);
+#else
+static inline void finit_task(struct task_struct *tsk)
+{
+}
+#endif
 
 static inline void tolerant_fwait(void)
 {
diff --git a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
index b585e04c..3178c3a 100644
--- a/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
+++ b/arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
@@ -277,7 +277,6 @@
 	.name		= "p4-clockmod",
 	.owner		= THIS_MODULE,
 	.attr		= p4clockmod_attr,
-	.hide_interface	= 1,
 };
 
 
diff --git a/arch/x86/kernel/ds.c b/arch/x86/kernel/ds.c
index 169a120..87b67e3 100644
--- a/arch/x86/kernel/ds.c
+++ b/arch/x86/kernel/ds.c
@@ -729,7 +729,7 @@
 
 	spin_unlock_irqrestore(&ds_lock, irq);
 
-	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_bts);
+	ds_write_config(tracer->ds.context, &tracer->trace.ds, ds_pebs);
 	ds_resume_pebs(tracer);
 
 	return tracer;
@@ -1029,5 +1029,4 @@
 
 void ds_exit_thread(struct task_struct *tsk)
 {
-	WARN_ON(tsk->thread.ds_ctx);
 }
diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c
index 1119d24..eb1ef3b 100644
--- a/arch/x86/kernel/efi.c
+++ b/arch/x86/kernel/efi.c
@@ -467,7 +467,7 @@
 	efi_memory_desc_t *md;
 	efi_status_t status;
 	unsigned long size;
-	u64 end, systab, addr, npages;
+	u64 end, systab, addr, npages, end_pfn;
 	void *p, *va;
 
 	efi.systab = NULL;
@@ -479,7 +479,10 @@
 		size = md->num_pages << EFI_PAGE_SHIFT;
 		end = md->phys_addr + size;
 
-		if (PFN_UP(end) <= max_low_pfn_mapped)
+		end_pfn = PFN_UP(end);
+		if (end_pfn <= max_low_pfn_mapped
+		    || (end_pfn > (1UL << (32 - PAGE_SHIFT))
+			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
 		else
 			va = efi_ioremap(md->phys_addr, size);
diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c
index 652c528..cb783b9 100644
--- a/arch/x86/kernel/efi_64.c
+++ b/arch/x86/kernel/efi_64.c
@@ -99,24 +99,11 @@
 
 void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size)
 {
-	static unsigned pages_mapped __initdata;
-	unsigned i, pages;
-	unsigned long offset;
+	unsigned long last_map_pfn;
 
-	pages = PFN_UP(phys_addr + size) - PFN_DOWN(phys_addr);
-	offset = phys_addr & ~PAGE_MASK;
-	phys_addr &= PAGE_MASK;
-
-	if (pages_mapped + pages > MAX_EFI_IO_PAGES)
+	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size)
 		return NULL;
 
-	for (i = 0; i < pages; i++) {
-		__set_fixmap(FIX_EFI_IO_MAP_FIRST_PAGE - pages_mapped,
-			     phys_addr, PAGE_KERNEL);
-		phys_addr += PAGE_SIZE;
-		pages_mapped++;
-	}
-
-	return (void __iomem *)__fix_to_virt(FIX_EFI_IO_MAP_FIRST_PAGE - \
-					     (pages_mapped - pages)) + offset;
+	return (void __iomem *)__va(phys_addr);
 }
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index b0f61f0..f2f8540 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -136,7 +136,7 @@
 #ifdef CONFIG_X86_32
 	if (!HAVE_HWFP) {
 		memset(tsk->thread.xstate, 0, xstate_size);
-		finit();
+		finit_task(tsk);
 		set_stopped_child_used_math(tsk);
 		return 0;
 	}
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2b46eb4..4526b3a 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -217,6 +217,14 @@
 			DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq"),
 		},
 	},
+	{	/* Handle problems with rebooting on Dell XPS710 */
+		.callback = set_bios_reboot,
+		.ident = "Dell XPS710",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c461f6d..6a8811a 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -770,6 +770,9 @@
 
 	finish_e820_parsing();
 
+	if (efi_enabled)
+		efi_init();
+
 	dmi_scan_machine();
 
 	dmi_check_system(bad_bios_dmi_table);
@@ -789,8 +792,6 @@
 	insert_resource(&iomem_resource, &data_resource);
 	insert_resource(&iomem_resource, &bss_resource);
 
-	if (efi_enabled)
-		efi_init();
 
 #ifdef CONFIG_X86_32
 	if (ppro_with_ram_bug()) {
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index 92f1c6f..960a8d9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -343,6 +343,11 @@
 		 * flush_tlb_user() for both user and kernel mappings unless
 		 * the Page Global Enable (PGE) feature bit is set. */
 		*dx |= 0x00002000;
+		/* We also lie, and say we're family id 5.  6 or greater
+		 * leads to a rdmsr in early_init_intel which we can't handle.
+		 * Family ID is returned as bits 8-12 in ax. */
+		*ax &= 0xFFFFF0FF;
+		*ax |= 0x00000500;
 		break;
 	case 0x80000000:
 		/* Futureproof this a little: if they ask how much extended
@@ -589,19 +594,21 @@
 		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
 		 * a straightforward 1 to 1 mapping, so force that here. */
 		__get_cpu_var(vector_irq)[vector] = i;
-		if (vector != SYSCALL_VECTOR) {
-			set_intr_gate(vector,
-				      interrupt[vector-FIRST_EXTERNAL_VECTOR]);
-			set_irq_chip_and_handler_name(i, &lguest_irq_controller,
-						      handle_level_irq,
-						      "level");
-		}
+		if (vector != SYSCALL_VECTOR)
+			set_intr_gate(vector, interrupt[i]);
 	}
 	/* This call is required to set up for 4k stacks, where we have
 	 * separate stacks for hard and soft interrupts. */
 	irq_ctx_init(smp_processor_id());
 }
 
+void lguest_setup_irq(unsigned int irq)
+{
+	irq_to_desc_alloc_cpu(irq, 0);
+	set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
+				      handle_level_irq, "level");
+}
+
 /*
  * Time.
  *
diff --git a/arch/x86/math-emu/fpu_aux.c b/arch/x86/math-emu/fpu_aux.c
index 491e737..aa09870 100644
--- a/arch/x86/math-emu/fpu_aux.c
+++ b/arch/x86/math-emu/fpu_aux.c
@@ -30,20 +30,29 @@
 }
 
 /* Needs to be externally visible */
-void finit(void)
+void finit_task(struct task_struct *tsk)
 {
-	control_word = 0x037f;
-	partial_status = 0;
-	top = 0;		/* We don't keep top in the status word internally. */
-	fpu_tag_word = 0xffff;
+	struct i387_soft_struct *soft = &tsk->thread.xstate->soft;
+	struct address *oaddr, *iaddr;
+	soft->cwd = 0x037f;
+	soft->swd = 0;
+	soft->ftop = 0;	/* We don't keep top in the status word internally. */
+	soft->twd = 0xffff;
 	/* The behaviour is different from that detailed in
 	   Section 15.1.6 of the Intel manual */
-	operand_address.offset = 0;
-	operand_address.selector = 0;
-	instruction_address.offset = 0;
-	instruction_address.selector = 0;
-	instruction_address.opcode = 0;
-	no_ip_update = 1;
+	oaddr = (struct address *)&soft->foo;
+	oaddr->offset = 0;
+	oaddr->selector = 0;
+	iaddr = (struct address *)&soft->fip;
+	iaddr->offset = 0;
+	iaddr->selector = 0;
+	iaddr->opcode = 0;
+	soft->no_update = 1;
+}
+
+void finit(void)
+{
+	finit_task(current);
 }
 
 /*
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 9f20503..6a518dd 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -451,23 +451,24 @@
 
 static void remove_kmmio_fault_pages(struct rcu_head *head)
 {
-	struct kmmio_delayed_release *dr = container_of(
-						head,
-						struct kmmio_delayed_release,
-						rcu);
+	struct kmmio_delayed_release *dr =
+		container_of(head, struct kmmio_delayed_release, rcu);
 	struct kmmio_fault_page *p = dr->release_list;
 	struct kmmio_fault_page **prevp = &dr->release_list;
 	unsigned long flags;
+
 	spin_lock_irqsave(&kmmio_lock, flags);
 	while (p) {
-		if (!p->count)
+		if (!p->count) {
 			list_del_rcu(&p->list);
-		else
+			prevp = &p->release_next;
+		} else {
 			*prevp = p->release_next;
-		prevp = &p->release_next;
+		}
 		p = p->release_next;
 	}
 	spin_unlock_irqrestore(&kmmio_lock, flags);
+
 	/* This is the real RCU destroy call. */
 	call_rcu(&dr->rcu, rcu_free_kmmio_fault_pages);
 }
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 7be47d1..7233bd7 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -515,6 +515,17 @@
 	 * primary protection behavior:
 	 */
 	__set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+
+	/*
+	 * Intel Atom errata AAH41 workaround.
+	 *
+	 * The real fix should be in hw or in a microcode update, but
+	 * we also probabilistically try to reduce the window of having
+	 * a large TLB mixed with 4K TLBs while instruction fetches are
+	 * going on.
+	 */
+	__flush_tlb_all();
+
 	base = NULL;
 
 out_unlock:
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 6c873dc..9812008 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -103,9 +103,6 @@
 	help
 	Can we use information of configuration file?
 
-config HIGHMEM
-	bool "High memory support"
-
 endmenu
 
 menu "Platform options"
diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c
index 9606d2b..4ec1633 100644
--- a/arch/xtensa/kernel/setup.c
+++ b/arch/xtensa/kernel/setup.c
@@ -44,6 +44,8 @@
 #include <asm/setup.h>
 #include <asm/param.h>
 
+#include <platform/hardware.h>
+
 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
 struct screen_info screen_info = { 0, 24, 0, 0, 0, 80, 0, 0, 0, 24, 1, 16};
 #endif
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index c7a021d..c44f830 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -30,6 +30,7 @@
 #include <linux/stringify.h>
 #include <linux/kallsyms.h>
 #include <linux/delay.h>
+#include <linux/hardirq.h>
 
 #include <asm/ptrace.h>
 #include <asm/timex.h>
diff --git a/arch/xtensa/mm/fault.c b/arch/xtensa/mm/fault.c
index 33f366b..bdd860d 100644
--- a/arch/xtensa/mm/fault.c
+++ b/arch/xtensa/mm/fault.c
@@ -14,6 +14,7 @@
 
 #include <linux/mm.h>
 #include <linux/module.h>
+#include <linux/hardirq.h>
 #include <asm/mmu_context.h>
 #include <asm/cacheflush.h>
 #include <asm/hardirq.h>
diff --git a/arch/xtensa/platforms/iss/console.c b/arch/xtensa/platforms/iss/console.c
index efed889..25d46c8 100644
--- a/arch/xtensa/platforms/iss/console.c
+++ b/arch/xtensa/platforms/iss/console.c
@@ -140,16 +140,14 @@
 }
 
 
-static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+static int rs_put_char(struct tty_struct *tty, unsigned char ch)
 {
 	char buf[2];
 
-	if (!tty)
-		return;
-
 	buf[0] = ch;
 	buf[1] = '\0';		/* Is this NULL necessary? */
 	__simc (SYS_write, 1, (unsigned long) buf, 1, 0, 0);
+	return 1;
 }
 
 static void rs_flush_chars(struct tty_struct *tty)
diff --git a/block/blk-merge.c b/block/blk-merge.c
index a104593..5a244f0 100644
--- a/block/blk-merge.c
+++ b/block/blk-merge.c
@@ -39,14 +39,13 @@
 }
 
 static unsigned int __blk_recalc_rq_segments(struct request_queue *q,
-					     struct bio *bio,
-					     unsigned int *seg_size_ptr)
+					     struct bio *bio)
 {
 	unsigned int phys_size;
 	struct bio_vec *bv, *bvprv = NULL;
 	int cluster, i, high, highprv = 1;
 	unsigned int seg_size, nr_phys_segs;
-	struct bio *fbio;
+	struct bio *fbio, *bbio;
 
 	if (!bio)
 		return 0;
@@ -87,26 +86,20 @@
 			seg_size = bv->bv_len;
 			highprv = high;
 		}
+		bbio = bio;
 	}
 
-	if (seg_size_ptr)
-		*seg_size_ptr = seg_size;
+	if (nr_phys_segs == 1 && seg_size > fbio->bi_seg_front_size)
+		fbio->bi_seg_front_size = seg_size;
+	if (seg_size > bbio->bi_seg_back_size)
+		bbio->bi_seg_back_size = seg_size;
 
 	return nr_phys_segs;
 }
 
 void blk_recalc_rq_segments(struct request *rq)
 {
-	unsigned int seg_size = 0, phys_segs;
-
-	phys_segs = __blk_recalc_rq_segments(rq->q, rq->bio, &seg_size);
-
-	if (phys_segs == 1 && seg_size > rq->bio->bi_seg_front_size)
-		rq->bio->bi_seg_front_size = seg_size;
-	if (seg_size > rq->biotail->bi_seg_back_size)
-		rq->biotail->bi_seg_back_size = seg_size;
-
-	rq->nr_phys_segments = phys_segs;
+	rq->nr_phys_segments = __blk_recalc_rq_segments(rq->q, rq->bio);
 }
 
 void blk_recount_segments(struct request_queue *q, struct bio *bio)
@@ -114,7 +107,7 @@
 	struct bio *nxt = bio->bi_next;
 
 	bio->bi_next = NULL;
-	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, NULL);
+	bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio);
 	bio->bi_next = nxt;
 	bio->bi_flags |= (1 << BIO_SEG_VALID);
 }
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index a603bbf..66e012c 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -582,18 +582,18 @@
 	{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci },		/* MCP79 */
 	{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci },		/* MCP79 */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc8), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc9), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bca), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcb), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcc), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci },		/* MCP7B */
-	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
+	{ PCI_VDEVICE(NVIDIA, 0x0d84), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d85), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d86), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d87), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d88), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d89), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8a), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8b), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8c), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8d), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8e), board_ahci },		/* MCP89 */
+	{ PCI_VDEVICE(NVIDIA, 0x0d8f), board_ahci },		/* MCP89 */
 
 	/* SiS */
 	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9fbf059..060bcd6 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1322,14 +1322,16 @@
 {
 	if (ata_id_has_lba(id)) {
 		if (ata_id_has_lba48(id))
-			return ata_id_u64(id, 100);
+			return ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
 		else
-			return ata_id_u32(id, 60);
+			return ata_id_u32(id, ATA_ID_LBA_CAPACITY);
 	} else {
 		if (ata_id_current_chs_valid(id))
-			return ata_id_u32(id, 57);
+			return id[ATA_ID_CUR_CYLS] * id[ATA_ID_CUR_HEADS] *
+			       id[ATA_ID_CUR_SECTORS];
 		else
-			return id[1] * id[3] * id[6];
+			return id[ATA_ID_CYLS] * id[ATA_ID_HEADS] *
+			       id[ATA_ID_SECTORS];
 	}
 }
 
@@ -4612,7 +4614,7 @@
 	VPRINTK("unmapping %u sg elements\n", qc->n_elem);
 
 	if (qc->n_elem)
-		dma_unmap_sg(ap->dev, sg, qc->n_elem, dir);
+		dma_unmap_sg(ap->dev, sg, qc->orig_n_elem, dir);
 
 	qc->flags &= ~ATA_QCFLAG_DMAMAP;
 	qc->sg = NULL;
@@ -4727,7 +4729,7 @@
 		return -1;
 
 	DPRINTK("%d sg elements mapped\n", n_elem);
-
+	qc->orig_n_elem = qc->n_elem;
 	qc->n_elem = n_elem;
 	qc->flags |= ATA_QCFLAG_DMAMAP;
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ce2ef04..ea89091 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2423,11 +2423,14 @@
 		}
 
 		/* prereset() might have cleared ATA_EH_RESET.  If so,
-		 * bang classes and return.
+		 * bang classes, thaw and return.
 		 */
 		if (reset && !(ehc->i.action & ATA_EH_RESET)) {
 			ata_for_each_dev(dev, link, ALL)
 				classes[dev->devno] = ATA_DEV_NONE;
+			if ((ap->pflags & ATA_PFLAG_FROZEN) &&
+			    ata_is_host_link(link))
+				ata_eh_thaw_port(ap);
 			rc = 0;
 			goto out;
 		}
@@ -2901,7 +2904,7 @@
 	int i;
 
 	for (i = 0; i < ATA_EH_UA_TRIES; i++) {
-		u8 sense_buffer[SCSI_SENSE_BUFFERSIZE];
+		u8 *sense_buffer = dev->link->ap->sector_buf;
 		u8 sense_key = 0;
 		unsigned int err_mask;
 
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 55a8eed..f65b537 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2523,7 +2523,7 @@
 module_init(nv_init);
 module_exit(nv_exit);
 module_param_named(adma, adma_enabled, bool, 0444);
-MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: true)");
+MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
 
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 43fa90b..f8f578a 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -303,7 +303,7 @@
 	sect_start_pfn = section_nr_to_pfn(mem_blk->phys_index);
 	sect_end_pfn = sect_start_pfn + PAGES_PER_SECTION - 1;
 	for (pfn = sect_start_pfn; pfn <= sect_end_pfn; pfn++) {
-		unsigned int nid;
+		int nid;
 
 		nid = get_nid_for_pfn(pfn);
 		if (nid < 0)
diff --git a/drivers/block/aoe/aoedev.c b/drivers/block/aoe/aoedev.c
index cc25057..eeea477 100644
--- a/drivers/block/aoe/aoedev.c
+++ b/drivers/block/aoe/aoedev.c
@@ -173,7 +173,7 @@
 		return;
 	while (atomic_read(&skb_shinfo(skb)->dataref) != 1 && i-- > 0)
 		msleep(Sms);
-	if (i <= 0) {
+	if (i < 0) {
 		printk(KERN_ERR
 			"aoe: %s holds ref: %s\n",
 			skb->dev ? skb->dev->name : "netif",
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index b5a0611..4f9b6d7 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -3606,11 +3606,9 @@
 		if (cciss_hard_reset_controller(pdev) || cciss_reset_msi(pdev))
 			return -ENODEV;
 
-		/* Some devices (notably the HP Smart Array 5i Controller)
-		   need a little pause here */
-		schedule_timeout_uninterruptible(30*HZ);
-
-		/* Now try to get the controller to respond to a no-op */
+		/* Now try to get the controller to respond to a no-op. Some
+		   devices (notably the HP Smart Array 5i Controller) need
+		   up to 30 seconds to respond. */
 		for (i=0; i<30; i++) {
 			if (cciss_noop(pdev) == 0)
 				break;
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6..bf03455 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -392,8 +392,7 @@
 	struct loop_device *lo = p->lo;
 	struct page *page = buf->page;
 	sector_t IV;
-	size_t size;
-	int ret;
+	int size, ret;
 
 	ret = buf->ops->confirm(pipe, buf);
 	if (unlikely(ret))
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index b6c8ce2..8f90508 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -977,6 +977,8 @@
 		break;
 
 	case XenbusStateClosing:
+		if (info->gd == NULL)
+			xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
 		bd = bdget_disk(info->gd, 0);
 		if (bd == NULL)
 			xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c
index 52f4361..d765afd 100644
--- a/drivers/char/agp/amd64-agp.c
+++ b/drivers/char/agp/amd64-agp.c
@@ -271,15 +271,15 @@
 	nb_order = (nb_order >> 1) & 7;
 	pci_read_config_dword(nb, AMD64_GARTAPERTUREBASE, &nb_base);
 	nb_aper = nb_base << 25;
-	if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order)) {
-		return 0;
-	}
 
 	/* Northbridge seems to contain crap. Try the AGP bridge. */
 
 	pci_read_config_word(agp, cap+0x14, &apsize);
-	if (apsize == 0xffff)
+	if (apsize == 0xffff) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
 		return -1;
+	}
 
 	apsize &= 0xfff;
 	/* Some BIOS use weird encodings not in the AGPv3 table. */
@@ -301,6 +301,11 @@
 		order = nb_order;
 	}
 
+	if (nb_order >= order) {
+		if (agp_aperture_valid(nb_aper, (32*1024*1024)<<nb_order))
+			return 0;
+	}
+
 	dev_info(&agp->dev, "aperture from AGP @ %Lx size %u MB\n",
 		 aper, 32 << order);
 	if (order < 0 || !agp_aperture_valid(aper, (32*1024*1024)<<order))
diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c
index c771418..4373adb 100644
--- a/drivers/char/agp/intel-agp.c
+++ b/drivers/char/agp/intel-agp.c
@@ -633,13 +633,15 @@
 			break;
 		}
 	}
-	if (gtt_entries > 0)
+	if (gtt_entries > 0) {
 		dev_info(&agp_bridge->dev->dev, "detected %dK %s memory\n",
 		       gtt_entries / KB(1), local ? "local" : "stolen");
-	else
+		gtt_entries /= KB(4);
+	} else {
 		dev_info(&agp_bridge->dev->dev,
 		       "no pre-allocated video memory detected\n");
-	gtt_entries /= KB(4);
+		gtt_entries = 0;
+	}
 
 	intel_private.gtt_entries = gtt_entries;
 }
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index b55cb67..d6daf3c 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -754,11 +754,6 @@
 	.release	= cpufreq_sysfs_release,
 };
 
-static struct kobj_type ktype_empty_cpufreq = {
-	.sysfs_ops	= &sysfs_ops,
-	.release	= cpufreq_sysfs_release,
-};
-
 
 /**
  * cpufreq_add_dev - add a CPU device
@@ -892,36 +887,26 @@
 	memcpy(&new_policy, policy, sizeof(struct cpufreq_policy));
 
 	/* prepare interface data */
-	if (!cpufreq_driver->hide_interface) {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+	ret = kobject_init_and_add(&policy->kobj, &ktype_cpufreq, &sys_dev->kobj,
+				   "cpufreq");
+	if (ret)
+		goto err_out_driver_exit;
+
+	/* set up files for this cpu device */
+	drv_attr = cpufreq_driver->attr;
+	while ((drv_attr) && (*drv_attr)) {
+		ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
 		if (ret)
 			goto err_out_driver_exit;
-
-		/* set up files for this cpu device */
-		drv_attr = cpufreq_driver->attr;
-		while ((drv_attr) && (*drv_attr)) {
-			ret = sysfs_create_file(&policy->kobj,
-						&((*drv_attr)->attr));
-			if (ret)
-				goto err_out_driver_exit;
-			drv_attr++;
-		}
-		if (cpufreq_driver->get) {
-			ret = sysfs_create_file(&policy->kobj,
-						&cpuinfo_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-		if (cpufreq_driver->target) {
-			ret = sysfs_create_file(&policy->kobj,
-						&scaling_cur_freq.attr);
-			if (ret)
-				goto err_out_driver_exit;
-		}
-	} else {
-		ret = kobject_init_and_add(&policy->kobj, &ktype_empty_cpufreq,
-					   &sys_dev->kobj, "cpufreq");
+		drv_attr++;
+	}
+	if (cpufreq_driver->get) {
+		ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+		if (ret)
+			goto err_out_driver_exit;
+	}
+	if (cpufreq_driver->target) {
+		ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
 		if (ret)
 			goto err_out_driver_exit;
 	}
diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c
index 33bd753..25b743a 100644
--- a/drivers/dca/dca-core.c
+++ b/drivers/dca/dca-core.c
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2007 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 732fa1e..e190d8b 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -430,13 +430,15 @@
 static void __exit dmatest_exit(void)
 {
 	struct dmatest_chan *dtc, *_dtc;
+	struct dma_chan *chan;
 
 	list_for_each_entry_safe(dtc, _dtc, &dmatest_channels, node) {
 		list_del(&dtc->node);
+		chan = dtc->chan;
 		dmatest_cleanup_channel(dtc);
 		pr_debug("dmatest: dropped channel %s\n",
-			 dma_chan_name(dtc->chan));
-		dma_release_channel(dtc->chan);
+			 dma_chan_name(chan));
+		dma_release_channel(chan);
 	}
 }
 module_exit(dmatest_exit);
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index 70126a6..86d6da4 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -158,7 +158,8 @@
 
 static void dma_halt(struct fsl_dma_chan *fsl_chan)
 {
-	int i = 0;
+	int i;
+
 	DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) | FSL_DMA_MR_CA,
 		32);
@@ -166,8 +167,11 @@
 		DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32) & ~(FSL_DMA_MR_CS
 		| FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA), 32);
 
-	while (!dma_is_idle(fsl_chan) && (i++ < 100))
+	for (i = 0; i < 100; i++) {
+		if (dma_is_idle(fsl_chan))
+			break;
 		udelay(10);
+	}
 	if (i >= 100 && !dma_is_idle(fsl_chan))
 		dev_err(fsl_chan->dev, "DMA halt timeout!\n");
 }
diff --git a/drivers/dma/ioat.c b/drivers/dma/ioat.c
index 4105d65..ed83dd9 100644
--- a/drivers/dma/ioat.c
+++ b/drivers/dma/ioat.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
diff --git a/drivers/dma/ioat_dca.c b/drivers/dma/ioat_dca.c
index 6cf622d..c012a1e 100644
--- a/drivers/dma/ioat_dca.c
+++ b/drivers/dma/ioat_dca.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2007 Intel Corporation.
+ * Copyright(c) 2007 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -49,6 +49,23 @@
 
 #define DCA_TAG_MAP_MASK 0xDF
 
+/* expected tag map bytes for I/OAT ver.2 */
+#define DCA2_TAG_MAP_BYTE0 0x80
+#define DCA2_TAG_MAP_BYTE1 0x0
+#define DCA2_TAG_MAP_BYTE2 0x81
+#define DCA2_TAG_MAP_BYTE3 0x82
+#define DCA2_TAG_MAP_BYTE4 0x82
+
+/* verify if tag map matches expected values */
+static inline int dca2_tag_map_valid(u8 *tag_map)
+{
+	return ((tag_map[0] == DCA2_TAG_MAP_BYTE0) &&
+		(tag_map[1] == DCA2_TAG_MAP_BYTE1) &&
+		(tag_map[2] == DCA2_TAG_MAP_BYTE2) &&
+		(tag_map[3] == DCA2_TAG_MAP_BYTE3) &&
+		(tag_map[4] == DCA2_TAG_MAP_BYTE4));
+}
+
 /*
  * "Legacy" DCA systems do not implement the DCA register set in the
  * I/OAT device.  Software needs direct support for their tag mappings.
@@ -452,6 +469,13 @@
 			ioatdca->tag_map[i] = 0;
 	}
 
+	if (!dca2_tag_map_valid(ioatdca->tag_map)) {
+		dev_err(&pdev->dev, "APICID_TAG_MAP set incorrectly by BIOS, "
+			"disabling DCA\n");
+		free_dca_provider(dca);
+		return NULL;
+	}
+
 	err = register_dca_provider(dca, &pdev->dev);
 	if (err) {
 		free_dca_provider(dca);
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index b3759c4..5905cd3 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1,6 +1,6 @@
 /*
  * Intel I/OAT DMA Linux driver
- * Copyright(c) 2004 - 2007 Intel Corporation.
+ * Copyright(c) 2004 - 2009 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
@@ -189,11 +189,13 @@
 		ioat_chan->xfercap = xfercap;
 		ioat_chan->desccount = 0;
 		INIT_DELAYED_WORK(&ioat_chan->work, ioat_dma_chan_reset_part2);
-		if (ioat_chan->device->version != IOAT_VER_1_2) {
-			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE
-					| IOAT_DMA_DCA_ANY_CPU,
-				ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
-		}
+		if (ioat_chan->device->version == IOAT_VER_2_0)
+			writel(IOAT_DCACTRL_CMPL_WRITE_ENABLE |
+			       IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
+		else if (ioat_chan->device->version == IOAT_VER_3_0)
+			writel(IOAT_DMA_DCA_ANY_CPU,
+			       ioat_chan->reg_base + IOAT_DCACTRL_OFFSET);
 		spin_lock_init(&ioat_chan->cleanup_lock);
 		spin_lock_init(&ioat_chan->desc_lock);
 		INIT_LIST_HEAD(&ioat_chan->free_desc);
@@ -1169,9 +1171,8 @@
 				 * up if the client is done with the descriptor
 				 */
 				if (async_tx_test_ack(&desc->async_tx)) {
-					list_del(&desc->node);
-					list_add_tail(&desc->node,
-						      &ioat_chan->free_desc);
+					list_move_tail(&desc->node,
+						       &ioat_chan->free_desc);
 				} else
 					desc->async_tx.cookie = 0;
 			} else {
@@ -1362,6 +1363,7 @@
 	dma_cookie_t cookie;
 	int err = 0;
 	struct completion cmp;
+	unsigned long tmo;
 
 	src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
 	if (!src)
@@ -1413,9 +1415,10 @@
 	}
 	device->common.device_issue_pending(dma_chan);
 
-	wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
+	tmo = wait_for_completion_timeout(&cmp, msecs_to_jiffies(3000));
 
-	if (device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
+	if (tmo == 0 ||
+	    device->common.device_is_tx_complete(dma_chan, cookie, NULL, NULL)
 					!= DMA_SUCCESS) {
 		dev_err(&device->pdev->dev,
 			"Self-test copy timed out, disabling\n");
@@ -1657,6 +1660,13 @@
 		" %d channels, device version 0x%02x, driver version %s\n",
 		device->common.chancnt, device->version, IOAT_DMA_VERSION);
 
+	if (!device->common.chancnt) {
+		dev_err(&device->pdev->dev,
+			"Intel(R) I/OAT DMA Engine problem found: "
+			"zero channels detected\n");
+		goto err_setup_interrupts;
+	}
+
 	err = ioat_dma_setup_interrupts(device);
 	if (err)
 		goto err_setup_interrupts;
@@ -1696,6 +1706,9 @@
 	struct dma_chan *chan, *_chan;
 	struct ioat_dma_chan *ioat_chan;
 
+	if (device->version != IOAT_VER_3_0)
+		cancel_delayed_work(&device->work);
+
 	ioat_dma_remove_interrupts(device);
 
 	dma_async_device_unregister(&device->common);
@@ -1707,10 +1720,6 @@
 	pci_release_regions(device->pdev);
 	pci_disable_device(device->pdev);
 
-	if (device->version != IOAT_VER_3_0) {
-		cancel_delayed_work(&device->work);
-	}
-
 	list_for_each_entry_safe(chan, _chan,
 				 &device->common.channels, device_node) {
 		ioat_chan = to_ioat_chan(chan);
diff --git a/drivers/dma/ioatdma.h b/drivers/dma/ioatdma.h
index a3306d0..a52ff4b 100644
--- a/drivers/dma/ioatdma.h
+++ b/drivers/dma/ioatdma.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -29,7 +29,7 @@
 #include <linux/pci_ids.h>
 #include <net/tcp.h>
 
-#define IOAT_DMA_VERSION  "3.30"
+#define IOAT_DMA_VERSION  "3.64"
 
 enum ioat_interrupt {
 	none = 0,
@@ -135,12 +135,14 @@
 	#ifdef CONFIG_NET_DMA
 	switch (dev->version) {
 	case IOAT_VER_1_2:
-	case IOAT_VER_3_0:
 		sysctl_tcp_dma_copybreak = 4096;
 		break;
 	case IOAT_VER_2_0:
 		sysctl_tcp_dma_copybreak = 2048;
 		break;
+	case IOAT_VER_3_0:
+		sysctl_tcp_dma_copybreak = 262144;
+		break;
 	}
 	#endif
 }
diff --git a/drivers/dma/ioatdma_hw.h b/drivers/dma/ioatdma_hw.h
index f1ae2c7..afa57ee 100644
--- a/drivers/dma/ioatdma_hw.h
+++ b/drivers/dma/ioatdma_hw.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/ioatdma_registers.h b/drivers/dma/ioatdma_registers.h
index 827cb50..49bc277 100644
--- a/drivers/dma/ioatdma_registers.h
+++ b/drivers/dma/ioatdma_registers.h
@@ -1,5 +1,5 @@
 /*
- * Copyright(c) 2004 - 2007 Intel Corporation. All rights reserved.
+ * Copyright(c) 2004 - 2009 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 647374a..16adbe6 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -928,19 +928,19 @@
 
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < IOP_ADMA_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index 1f154d0..ae50a9d 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -729,7 +729,7 @@
 
 	ichan->status = IPU_CHANNEL_READY;
 
-	spin_unlock_irqrestore(ipu->lock, flags);
+	spin_unlock_irqrestore(&ipu->lock, flags);
 
 	return 0;
 }
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index 5d5d5b3..cb7f26f 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1019,19 +1019,19 @@
 
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
 		xor_srcs[src_idx] = alloc_page(GFP_KERNEL);
-		if (!xor_srcs[src_idx])
-			while (src_idx--) {
+		if (!xor_srcs[src_idx]) {
+			while (src_idx--)
 				__free_page(xor_srcs[src_idx]);
-				return -ENOMEM;
-			}
+			return -ENOMEM;
+		}
 	}
 
 	dest = alloc_page(GFP_KERNEL);
-	if (!dest)
-		while (src_idx--) {
+	if (!dest) {
+		while (src_idx--)
 			__free_page(xor_srcs[src_idx]);
-			return -ENOMEM;
-		}
+		return -ENOMEM;
+	}
 
 	/* Fill in src buffers */
 	for (src_idx = 0; src_idx < MV_XOR_NUM_SRC_TEST; src_idx++) {
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index 096e2a3..7c8b15b 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -168,7 +168,7 @@
 	    file_priv->minor->master != file_priv->master) {
 		mutex_lock(&dev->struct_mutex);
 		file_priv->minor->master = drm_master_get(file_priv->master);
-		mutex_lock(&dev->struct_mutex);
+		mutex_unlock(&dev->struct_mutex);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 6dab63b..6d21b9e 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1105,7 +1105,7 @@
 					 1024 * 1024,
 					 MTRR_TYPE_WRCOMB, 1);
 	if (dev_priv->mm.gtt_mtrr < 0) {
-		DRM_INFO("MTRR allocation failed\n.  Graphics "
+		DRM_INFO("MTRR allocation failed.  Graphics "
 			 "performance may suffer.\n");
 	}
 
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 17fa408..d6cc986 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -279,7 +279,6 @@
 	u8 saveAR_INDEX;
 	u8 saveAR[21];
 	u8 saveDACMASK;
-	u8 saveDACDATA[256*3]; /* 256 3-byte colors */
 	u8 saveCR[37];
 
 	struct {
@@ -457,6 +456,12 @@
 
 	/** for phy allocated objects */
 	struct drm_i915_gem_phys_object *phys_obj;
+
+	/**
+	 * Used for checking the object doesn't appear more than once
+	 * in an execbuffer object list.
+	 */
+	int in_execbuffer;
 };
 
 /**
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index 85685bf..37427e4 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1476,7 +1476,7 @@
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	int regnum = obj_priv->fence_reg;
 	int tile_width;
-	uint32_t val;
+	uint32_t fence_reg, val;
 	uint32_t pitch_val;
 
 	if ((obj_priv->gtt_offset & ~I915_FENCE_START_MASK) ||
@@ -1503,7 +1503,11 @@
 	val |= pitch_val << I830_FENCE_PITCH_SHIFT;
 	val |= I830_FENCE_REG_VALID;
 
-	I915_WRITE(FENCE_REG_830_0 + (regnum * 4), val);
+	if (regnum < 8)
+		fence_reg = FENCE_REG_830_0 + (regnum * 4);
+	else
+		fence_reg = FENCE_REG_945_8 + ((regnum - 8) * 4);
+	I915_WRITE(fence_reg, val);
 }
 
 static void i830_write_fence_reg(struct drm_i915_fence_reg *reg)
@@ -1557,7 +1561,8 @@
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct drm_i915_gem_object *obj_priv = obj->driver_private;
 	struct drm_i915_fence_reg *reg = NULL;
-	int i, ret;
+	struct drm_i915_gem_object *old_obj_priv = NULL;
+	int i, ret, avail;
 
 	switch (obj_priv->tiling_mode) {
 	case I915_TILING_NONE:
@@ -1580,25 +1585,46 @@
 	}
 
 	/* First try to find a free reg */
+try_again:
+	avail = 0;
 	for (i = dev_priv->fence_reg_start; i < dev_priv->num_fence_regs; i++) {
 		reg = &dev_priv->fence_regs[i];
 		if (!reg->obj)
 			break;
+
+		old_obj_priv = reg->obj->driver_private;
+		if (!old_obj_priv->pin_count)
+		    avail++;
 	}
 
 	/* None available, try to steal one or wait for a user to finish */
 	if (i == dev_priv->num_fence_regs) {
-		struct drm_i915_gem_object *old_obj_priv = NULL;
+		uint32_t seqno = dev_priv->mm.next_gem_seqno;
 		loff_t offset;
 
-try_again:
-		/* Could try to use LRU here instead... */
+		if (avail == 0)
+			return -ENOMEM;
+
 		for (i = dev_priv->fence_reg_start;
 		     i < dev_priv->num_fence_regs; i++) {
+			uint32_t this_seqno;
+
 			reg = &dev_priv->fence_regs[i];
 			old_obj_priv = reg->obj->driver_private;
-			if (!old_obj_priv->pin_count)
+
+			if (old_obj_priv->pin_count)
+				continue;
+
+			/* i915 uses fences for GPU access to tiled buffers */
+			if (IS_I965G(dev) || !old_obj_priv->active)
 				break;
+
+			/* find the seqno of the first available fence */
+			this_seqno = old_obj_priv->last_rendering_seqno;
+			if (this_seqno != 0 &&
+			    reg->obj->write_domain == 0 &&
+			    i915_seqno_passed(seqno, this_seqno))
+				seqno = this_seqno;
 		}
 
 		/*
@@ -1606,15 +1632,25 @@
 		 * objects to finish before trying again.
 		 */
 		if (i == dev_priv->num_fence_regs) {
-			ret = i915_gem_object_set_to_gtt_domain(reg->obj, 0);
-			if (ret) {
-				WARN(ret != -ERESTARTSYS,
-				     "switch to GTT domain failed: %d\n", ret);
-				return ret;
+			if (seqno == dev_priv->mm.next_gem_seqno) {
+				i915_gem_flush(dev,
+					       I915_GEM_GPU_DOMAINS,
+					       I915_GEM_GPU_DOMAINS);
+				seqno = i915_add_request(dev,
+							 I915_GEM_GPU_DOMAINS);
+				if (seqno == 0)
+					return -ENOMEM;
 			}
+
+			ret = i915_wait_request(dev, seqno);
+			if (ret)
+				return ret;
 			goto try_again;
 		}
 
+		BUG_ON(old_obj_priv->active ||
+		       (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
+
 		/*
 		 * Zap this virtual mapping so we can set up a fence again
 		 * for this object next time we need it.
@@ -1655,8 +1691,17 @@
 
 	if (IS_I965G(dev))
 		I915_WRITE64(FENCE_REG_965_0 + (obj_priv->fence_reg * 8), 0);
-	else
-		I915_WRITE(FENCE_REG_830_0 + (obj_priv->fence_reg * 4), 0);
+	else {
+		uint32_t fence_reg;
+
+		if (obj_priv->fence_reg < 8)
+			fence_reg = FENCE_REG_830_0 + obj_priv->fence_reg * 4;
+		else
+			fence_reg = FENCE_REG_945_8 + (obj_priv->fence_reg -
+						       8) * 4;
+
+		I915_WRITE(fence_reg, 0);
+	}
 
 	dev_priv->fence_regs[obj_priv->fence_reg].obj = NULL;
 	obj_priv->fence_reg = I915_FENCE_REG_NONE;
@@ -2469,6 +2514,7 @@
 	struct drm_i915_gem_exec_object *exec_list = NULL;
 	struct drm_gem_object **object_list = NULL;
 	struct drm_gem_object *batch_obj;
+	struct drm_i915_gem_object *obj_priv;
 	int ret, i, pinned = 0;
 	uint64_t exec_offset;
 	uint32_t seqno, flush_domains;
@@ -2533,6 +2579,15 @@
 			ret = -EBADF;
 			goto err;
 		}
+
+		obj_priv = object_list[i]->driver_private;
+		if (obj_priv->in_execbuffer) {
+			DRM_ERROR("Object %p appears more than once in object list\n",
+				   object_list[i]);
+			ret = -EBADF;
+			goto err;
+		}
+		obj_priv->in_execbuffer = true;
 	}
 
 	/* Pin and relocate */
@@ -2674,8 +2729,13 @@
 	for (i = 0; i < pinned; i++)
 		i915_gem_object_unpin(object_list[i]);
 
-	for (i = 0; i < args->buffer_count; i++)
+	for (i = 0; i < args->buffer_count; i++) {
+		if (object_list[i]) {
+			obj_priv = object_list[i]->driver_private;
+			obj_priv->in_execbuffer = false;
+		}
 		drm_gem_object_unreference(object_list[i]);
+	}
 
 	mutex_unlock(&dev->struct_mutex);
 
@@ -2712,17 +2772,24 @@
 		ret = i915_gem_object_bind_to_gtt(obj, alignment);
 		if (ret != 0) {
 			if (ret != -EBUSY && ret != -ERESTARTSYS)
-				DRM_ERROR("Failure to bind: %d", ret);
+				DRM_ERROR("Failure to bind: %d\n", ret);
 			return ret;
 		}
-		/*
-		 * Pre-965 chips need a fence register set up in order to
-		 * properly handle tiled surfaces.
-		 */
-		if (!IS_I965G(dev) &&
-		    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
-		    obj_priv->tiling_mode != I915_TILING_NONE)
-			i915_gem_object_get_fence_reg(obj, true);
+	}
+	/*
+	 * Pre-965 chips need a fence register set up in order to
+	 * properly handle tiled surfaces.
+	 */
+	if (!IS_I965G(dev) &&
+	    obj_priv->fence_reg == I915_FENCE_REG_NONE &&
+	    obj_priv->tiling_mode != I915_TILING_NONE) {
+		ret = i915_gem_object_get_fence_reg(obj, true);
+		if (ret != 0) {
+			if (ret != -EBUSY && ret != -ERESTARTSYS)
+				DRM_ERROR("Failure to install fence: %d\n",
+					  ret);
+			return ret;
+		}
 	}
 	obj_priv->pin_count++;
 
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 9d6539a..90600d8 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -184,6 +184,7 @@
  * Fence registers
  */
 #define FENCE_REG_830_0			0x2000
+#define FENCE_REG_945_8			0x3000
 #define   I830_FENCE_START_MASK		0x07f80000
 #define   I830_FENCE_TILING_Y_SHIFT	12
 #define   I830_FENCE_SIZE_BITS(size)	((ffs((size) >> 19) - 1) << 8)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5d84027..d669cc2 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -119,11 +119,6 @@
 
 	/* VGA color palette registers */
 	dev_priv->saveDACMASK = I915_READ8(VGA_DACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACRX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		dev_priv->saveDACDATA[i] = I915_READ8(VGA_DACDATA);
 
 	/* MSR bits */
 	dev_priv->saveMSR = I915_READ8(VGA_MSR_READ);
@@ -225,12 +220,6 @@
 
 	/* VGA color palette registers */
 	I915_WRITE8(VGA_DACMASK, dev_priv->saveDACMASK);
-	/* DACCRX automatically increments during read */
-	I915_WRITE8(VGA_DACWX, 0);
-	/* Read 3 bytes of color data from each index */
-	for (i = 0; i < 256 * 3; i++)
-		I915_WRITE8(VGA_DACDATA, dev_priv->saveDACDATA[i]);
-
 }
 
 int i915_save_state(struct drm_device *dev)
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cfc1ee9..b251d86 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -72,6 +72,7 @@
 #define	LM85_COMPANY_SMSC		0x5c
 #define	LM85_VERSTEP_VMASK              0xf0
 #define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_GENERIC2		0x70
 #define	LM85_VERSTEP_LM85C		0x60
 #define	LM85_VERSTEP_LM85B		0x62
 #define	LM85_VERSTEP_ADM1027		0x60
@@ -334,6 +335,7 @@
 static const struct i2c_device_id lm85_id[] = {
 	{ "adm1027", adm1027 },
 	{ "adt7463", adt7463 },
+	{ "adt7468", adt7468 },
 	{ "lm85", any_chip },
 	{ "lm85b", lm85b },
 	{ "lm85c", lm85c },
@@ -408,7 +410,8 @@
 	struct lm85_data *data = lm85_update_device(dev);
 	int vid;
 
-	if (data->type == adt7463 && (data->vid & 0x80)) {
+	if ((data->type == adt7463 || data->type == adt7468) &&
+	    (data->vid & 0x80)) {
 		/* 6-pin VID (VRM 10) */
 		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
 	} else {
@@ -1153,7 +1156,8 @@
 			address, company, verstep);
 
 		/* All supported chips have the version in common */
-		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC) {
+		if ((verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC &&
+		    (verstep & LM85_VERSTEP_VMASK) != LM85_VERSTEP_GENERIC2) {
 			dev_dbg(&adapter->dev, "Autodetection failed: "
 				"unsupported version\n");
 			return -ENODEV;
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index e072903..5ea3bfa 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -721,6 +721,11 @@
 	depends on SOC_TX4939
 	select BLK_DEV_IDEDMA_SFF
 
+config BLK_DEV_IDE_AT91
+	tristate "Atmel AT91 (SAM9, CAP9, AT572D940HF) IDE support"
+	depends on ARM && ARCH_AT91 && !ARCH_AT91RM9200 && !ARCH_AT91X40
+	select IDE_TIMINGS
+
 config IDE_ARM
 	tristate "ARM IDE support"
 	depends on ARM && (ARCH_RPC || ARCH_SHARK)
diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile
index d0e3d7d..1c326d9 100644
--- a/drivers/ide/Makefile
+++ b/drivers/ide/Makefile
@@ -116,3 +116,4 @@
 
 obj-$(CONFIG_BLK_DEV_IDE_TX4938)	+= tx4938ide.o
 obj-$(CONFIG_BLK_DEV_IDE_TX4939)	+= tx4939ide.o
+obj-$(CONFIG_BLK_DEV_IDE_AT91)		+= at91_ide.o
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
new file mode 100644
index 0000000..1bb50f4
--- /dev/null
+++ b/drivers/ide/at91_ide.c
@@ -0,0 +1,467 @@
+/*
+ * IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller
+ * with Compact Flash True IDE logic
+ *
+ * Copyright (c) 2008, 2009 Kelvatek Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ide.h>
+#include <linux/platform_device.h>
+
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91sam9263.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9263_matrix.h>
+
+#define DRV_NAME "at91_ide"
+
+#define perr(fmt, args...) pr_err(DRV_NAME ": " fmt, ##args)
+#define pdbg(fmt, args...) pr_debug("%s " fmt, __func__, ##args)
+
+/*
+ * Access to IDE device is possible through EBI Static Memory Controller
+ * with Compact Flash logic. For details see EBI and SMC datasheet sections
+ * of any microcontroller from AT91SAM9 family.
+ *
+ * Within SMC chip select address space, lines A[23:21] distinguish Compact
+ * Flash modes (I/O, common memory, attribute memory, True IDE). IDE modes are:
+ *   0x00c0000 - True IDE
+ *   0x00e0000 - Alternate True IDE (Alt Status Register)
+ *
+ * On True IDE mode Task File and Data Register are mapped at the same address.
+ * To distinguish access between these two different bus data width is used:
+ * 8Bit for Task File, 16Bit for Data I/O.
+ *
+ * After initialization we do 8/16 bit flipping (changes in SMC MODE register)
+ * only inside IDE callback routines which are serialized by IDE layer,
+ * so no additional locking needed.
+ */
+
+#define TASK_FILE	0x00c00000
+#define ALT_MODE	0x00e00000
+#define REGS_SIZE	8
+
+#define enter_16bit(cs, mode) do {					\
+	mode = at91_sys_read(AT91_SMC_MODE(cs));			\
+	at91_sys_write(AT91_SMC_MODE(cs), mode | AT91_SMC_DBW_16);	\
+} while (0)
+
+#define leave_16bit(cs, mode) at91_sys_write(AT91_SMC_MODE(cs), mode);
+
+static void set_smc_timings(const u8 chipselect, const u16 cycle,
+			    const u16 setup, const u16 pulse,
+			    const u16 data_float, int use_iordy)
+{
+	unsigned long mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+			     AT91_SMC_BAT_SELECT;
+
+	/* disable or enable waiting for IORDY signal */
+	if (use_iordy)
+		mode |= AT91_SMC_EXNWMODE_READY;
+
+	/* add data float cycles if needed */
+	if (data_float)
+		mode |= AT91_SMC_TDF_(data_float);
+
+	at91_sys_write(AT91_SMC_MODE(chipselect), mode);
+
+	/* setup timings in SMC */
+	at91_sys_write(AT91_SMC_SETUP(chipselect), AT91_SMC_NWESETUP_(setup) |
+						   AT91_SMC_NCS_WRSETUP_(0) |
+						   AT91_SMC_NRDSETUP_(setup) |
+						   AT91_SMC_NCS_RDSETUP_(0));
+	at91_sys_write(AT91_SMC_PULSE(chipselect), AT91_SMC_NWEPULSE_(pulse) |
+						   AT91_SMC_NCS_WRPULSE_(cycle) |
+						   AT91_SMC_NRDPULSE_(pulse) |
+						   AT91_SMC_NCS_RDPULSE_(cycle));
+	at91_sys_write(AT91_SMC_CYCLE(chipselect), AT91_SMC_NWECYCLE_(cycle) |
+						   AT91_SMC_NRDCYCLE_(cycle));
+}
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+	u64 tmp = ns;
+
+	tmp *= mck_hz;
+	tmp += 1000*1000*1000 - 1; /* round up */
+	do_div(tmp, 1000*1000*1000);
+	return (unsigned int) tmp;
+}
+
+static void apply_timings(const u8 chipselect, const u8 pio,
+			  const struct ide_timing *timing, int use_iordy)
+{
+	unsigned int t0, t1, t2, t6z;
+	unsigned int cycle, setup, pulse, data_float;
+	unsigned int mck_hz;
+	struct clk *mck;
+
+	/* see table 22 of Compact Flash standard 4.1 for the meaning,
+	 * we do not stretch active (t2) time, so setup (t1) + hold time (th)
+	 * assure at least minimal recovery (t2i) time */
+	t0 = timing->cyc8b;
+	t1 = timing->setup;
+	t2 = timing->act8b;
+	t6z = (pio < 5) ? 30 : 20;
+
+	pdbg("t0=%u t1=%u t2=%u t6z=%u\n", t0, t1, t2, t6z);
+
+	mck = clk_get(NULL, "mck");
+	BUG_ON(IS_ERR(mck));
+	mck_hz = clk_get_rate(mck);
+	pdbg("mck_hz=%u\n", mck_hz);
+
+	cycle = calc_mck_cycles(t0, mck_hz);
+	setup = calc_mck_cycles(t1, mck_hz);
+	pulse = calc_mck_cycles(t2, mck_hz);
+	data_float = calc_mck_cycles(t6z, mck_hz);
+
+	pdbg("cycle=%u setup=%u pulse=%u data_float=%u\n",
+	     cycle, setup, pulse, data_float);
+
+	set_smc_timings(chipselect, cycle, setup, pulse, data_float, use_iordy);
+}
+
+static void at91_ide_input_data(ide_drive_t *drive, struct request *rq,
+				void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect, buf, len);
+
+	len++;
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_insw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static void at91_ide_output_data(ide_drive_t *drive, struct request *rq,
+				 void *buf, unsigned int len)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	u8 chipselect = hwif->select_data;
+	unsigned long mode;
+
+	pdbg("cs %u buf %p len %d\n", chipselect,  buf, len);
+
+	enter_16bit(chipselect, mode);
+	__ide_mm_outsw((void __iomem *) io_ports->data_addr, buf, len / 2);
+	leave_16bit(chipselect, mode);
+}
+
+static u8 ide_mm_inb(unsigned long port)
+{
+	return readb((void __iomem *) port);
+}
+
+static void ide_mm_outb(u8 value, unsigned long port)
+{
+	writeb(value, (void __iomem *) port);
+}
+
+static void at91_ide_tf_load(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+	u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
+
+	if (task->tf_flags & IDE_TFLAG_FLAGGED)
+		HIHI = 0xFF;
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DATA) {
+		u16 data = (tf->hob_data << 8) | tf->data;
+
+		at91_ide_output_data(drive, NULL, &data, 2);
+	}
+
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
+		ide_mm_outb(tf->hob_feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
+		ide_mm_outb(tf->hob_nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
+		ide_mm_outb(tf->hob_lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
+		ide_mm_outb(tf->hob_lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
+		ide_mm_outb(tf->hob_lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
+		ide_mm_outb(tf->feature, io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
+		ide_mm_outb(tf->nsect, io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
+		ide_mm_outb(tf->lbal, io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
+		ide_mm_outb(tf->lbam, io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
+		ide_mm_outb(tf->lbah, io_ports->lbah_addr);
+
+	if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
+		ide_mm_outb((tf->device & HIHI) | drive->select, io_ports->device_addr);
+}
+
+static void at91_ide_tf_read(ide_drive_t *drive, ide_task_t *task)
+{
+	ide_hwif_t *hwif = drive->hwif;
+	struct ide_io_ports *io_ports = &hwif->io_ports;
+	struct ide_taskfile *tf = &task->tf;
+
+	if (task->tf_flags & IDE_TFLAG_IN_DATA) {
+		u16 data;
+
+		at91_ide_input_data(drive, NULL, &data, 2);
+		tf->data = data & 0xff;
+		tf->hob_data = (data >> 8) & 0xff;
+	}
+
+	/* be sure we're looking at the low order bits */
+	ide_mm_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
+
+	if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
+		tf->feature = ide_mm_inb(io_ports->feature_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_NSECT)
+		tf->nsect  = ide_mm_inb(io_ports->nsect_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAL)
+		tf->lbal   = ide_mm_inb(io_ports->lbal_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAM)
+		tf->lbam   = ide_mm_inb(io_ports->lbam_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_LBAH)
+		tf->lbah   = ide_mm_inb(io_ports->lbah_addr);
+	if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
+		tf->device = ide_mm_inb(io_ports->device_addr);
+
+	if (task->tf_flags & IDE_TFLAG_LBA48) {
+		ide_mm_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
+
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
+			tf->hob_feature = ide_mm_inb(io_ports->feature_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
+			tf->hob_nsect   = ide_mm_inb(io_ports->nsect_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
+			tf->hob_lbal    = ide_mm_inb(io_ports->lbal_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
+			tf->hob_lbam    = ide_mm_inb(io_ports->lbam_addr);
+		if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
+			tf->hob_lbah    = ide_mm_inb(io_ports->lbah_addr);
+	}
+}
+
+static void at91_ide_set_pio_mode(ide_drive_t *drive, const u8 pio)
+{
+	struct ide_timing *timing;
+	u8 chipselect = drive->hwif->select_data;
+	int use_iordy = 0;
+
+	pdbg("chipselect %u pio %u\n", chipselect, pio);
+
+	timing = ide_timing_find_mode(XFER_PIO_0 + pio);
+	BUG_ON(!timing);
+
+	if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
+	    !(ata_id_is_cfa(drive->id) && pio > 4))
+		use_iordy = 1;
+
+	apply_timings(chipselect, pio, timing, use_iordy);
+}
+
+static const struct ide_tp_ops at91_ide_tp_ops = {
+	.exec_command	= ide_exec_command,
+	.read_status	= ide_read_status,
+	.read_altstatus	= ide_read_altstatus,
+	.set_irq	= ide_set_irq,
+
+	.tf_load	= at91_ide_tf_load,
+	.tf_read	= at91_ide_tf_read,
+
+	.input_data	= at91_ide_input_data,
+	.output_data	= at91_ide_output_data,
+};
+
+static const struct ide_port_ops at91_ide_port_ops = {
+	.set_pio_mode	= at91_ide_set_pio_mode,
+};
+
+static const struct ide_port_info at91_ide_port_info __initdata = {
+	.port_ops	= &at91_ide_port_ops,
+	.tp_ops		= &at91_ide_tp_ops,
+	.host_flags 	= IDE_HFLAG_MMIO | IDE_HFLAG_NO_DMA | IDE_HFLAG_SINGLE |
+			  IDE_HFLAG_NO_IO_32BIT | IDE_HFLAG_UNMASK_IRQS,
+	.pio_mask 	= ATA_PIO5,
+};
+
+/*
+ * If interrupt is delivered through GPIO, IRQ are triggered on falling
+ * and rising edge of signal. Whereas IDE device request interrupt on high
+ * level (rising edge in our case). This mean we have fake interrupts, so
+ * we need to check interrupt pin and exit instantly from ISR when line
+ * is on low level.
+ */
+
+irqreturn_t at91_irq_handler(int irq, void *dev_id)
+{
+	int ntries = 8;
+	int pin_val1, pin_val2;
+
+	/* additional deglitch, line can be noisy in badly designed PCB */
+	do {
+		pin_val1 = at91_get_gpio_value(irq);
+		pin_val2 = at91_get_gpio_value(irq);
+	} while (pin_val1 != pin_val2 && --ntries > 0);
+
+	if (pin_val1 == 0 || ntries <= 0)
+		return IRQ_HANDLED;
+
+	return ide_intr(irq, dev_id);
+}
+
+static int __init at91_ide_probe(struct platform_device *pdev)
+{
+	int ret;
+	hw_regs_t hw;
+	hw_regs_t *hws[] = { &hw, NULL, NULL, NULL };
+	struct ide_host *host;
+	struct resource *res;
+	unsigned long tf_base = 0, ctl_base = 0;
+	struct at91_cf_data *board = pdev->dev.platform_data;
+
+	if (!board)
+		return -ENODEV;
+
+	if (board->det_pin && at91_get_gpio_value(board->det_pin) != 0) {
+		perr("no device detected\n");
+		return -ENODEV;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		perr("can't get memory resource\n");
+		return -ENODEV;
+	}
+
+	if (!devm_request_mem_region(&pdev->dev, res->start + TASK_FILE,
+				     REGS_SIZE, "ide") ||
+	    !devm_request_mem_region(&pdev->dev, res->start + ALT_MODE,
+				     REGS_SIZE, "alt")) {
+		perr("memory resources in use\n");
+		return -EBUSY;
+	}
+
+	pdbg("chipselect %u irq %u res %08lx\n", board->chipselect,
+	     board->irq_pin, (unsigned long) res->start);
+
+	tf_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + TASK_FILE,
+					       REGS_SIZE);
+	ctl_base = (unsigned long) devm_ioremap(&pdev->dev, res->start + ALT_MODE,
+						REGS_SIZE);
+	if (!tf_base || !ctl_base) {
+		perr("can't map memory regions\n");
+		return -EBUSY;
+	}
+
+	memset(&hw, 0, sizeof(hw));
+
+	if (board->flags & AT91_IDE_SWAP_A0_A2) {
+		/* workaround for stupid hardware bug */
+		hw.io_ports.data_addr	= tf_base + 0;
+		hw.io_ports.error_addr	= tf_base + 4;
+		hw.io_ports.nsect_addr	= tf_base + 2;
+		hw.io_ports.lbal_addr	= tf_base + 6;
+		hw.io_ports.lbam_addr	= tf_base + 1;
+		hw.io_ports.lbah_addr	= tf_base + 5;
+		hw.io_ports.device_addr = tf_base + 3;
+		hw.io_ports.command_addr = tf_base + 7;
+		hw.io_ports.ctl_addr	= ctl_base + 3;
+	} else
+		ide_std_init_ports(&hw, tf_base, ctl_base + 6);
+
+	hw.irq = board->irq_pin;
+	hw.chipset = ide_generic;
+	hw.dev = &pdev->dev;
+
+	host = ide_host_alloc(&at91_ide_port_info, hws);
+	if (!host) {
+		perr("failed to allocate ide host\n");
+		return -ENOMEM;
+	}
+
+	/* setup Static Memory Controller - PIO 0 as default */
+	apply_timings(board->chipselect, 0, ide_timing_find_mode(XFER_PIO_0), 0);
+
+	/* with GPIO interrupt we have to do quirks in handler */
+	if (board->irq_pin >= PIN_BASE)
+		host->irq_handler = at91_irq_handler;
+
+	host->ports[0]->select_data = board->chipselect;
+
+	ret = ide_host_register(host, &at91_ide_port_info, hws);
+	if (ret) {
+		perr("failed to register ide host\n");
+		goto err_free_host;
+	}
+	platform_set_drvdata(pdev, host);
+	return 0;
+
+err_free_host:
+	ide_host_free(host);
+	return ret;
+}
+
+static int __exit at91_ide_remove(struct platform_device *pdev)
+{
+	struct ide_host *host = platform_get_drvdata(pdev);
+
+	ide_host_remove(host);
+	return 0;
+}
+
+static struct platform_driver at91_ide_driver = {
+	.driver	= {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+	},
+	.remove	= __exit_p(at91_ide_remove),
+};
+
+static int __init at91_ide_init(void)
+{
+	return platform_driver_probe(&at91_ide_driver, at91_ide_probe);
+}
+
+static void __exit at91_ide_exit(void)
+{
+	platform_driver_unregister(&at91_ide_driver);
+}
+
+module_init(at91_ide_init);
+module_exit(at91_ide_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Stanislaw Gruszka <stf_xl@wp.pl>");
+
diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c
index 1146f42..1f86dcb 100644
--- a/drivers/ide/ide-disk_proc.c
+++ b/drivers/ide/ide-disk_proc.c
@@ -125,5 +125,5 @@
 	IDE_PROC_DEVSET(multcount,	0,    16),
 	IDE_PROC_DEVSET(nowerr,		0,     1),
 	IDE_PROC_DEVSET(wcache,		0,     1),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c
index 3ec762c..fcd4d81 100644
--- a/drivers/ide/ide-floppy_proc.c
+++ b/drivers/ide/ide-floppy_proc.c
@@ -29,5 +29,5 @@
 	IDE_PROC_DEVSET(bios_head, 0,  255),
 	IDE_PROC_DEVSET(bios_sect, 0,   63),
 	IDE_PROC_DEVSET(ticks,	   0,  255),
-	{ 0 },
+	{ NULL },
 };
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 9ee51ad..a9a6c20 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -908,7 +908,7 @@
 	ide_drive_t	*uninitialized_var(drive);
 	ide_handler_t	*handler;
 	unsigned long	flags;
-	unsigned long	wait = -1;
+	int		wait = -1;
 	int		plug_device = 0;
 
 	spin_lock_irqsave(&hwif->lock, flags);
@@ -1162,6 +1162,7 @@
 
 	return irq_ret;
 }
+EXPORT_SYMBOL_GPL(ide_intr);
 
 /**
  *	ide_do_drive_cmd	-	issue IDE special command
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 753b92e..b1892bd 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -315,6 +315,8 @@
 	u8 io_32bit = drive->io_32bit;
 	u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
 
+	len++;
+
 	if (io_32bit) {
 		unsigned long uninitialized_var(flags);
 
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index ce0818a..ee8e3e7 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -950,6 +950,7 @@
 static int init_irq (ide_hwif_t *hwif)
 {
 	struct ide_io_ports *io_ports = &hwif->io_ports;
+	irq_handler_t irq_handler;
 	int sa = 0;
 
 	mutex_lock(&ide_cfg_mtx);
@@ -959,6 +960,10 @@
 	hwif->timer.function = &ide_timer_expiry;
 	hwif->timer.data = (unsigned long)hwif;
 
+	irq_handler = hwif->host->irq_handler;
+	if (irq_handler == NULL)
+		irq_handler = ide_intr;
+
 #if defined(__mc68000__)
 	sa = IRQF_SHARED;
 #endif /* __mc68000__ */
@@ -969,7 +974,7 @@
 	if (io_ports->ctl_addr)
 		hwif->tp_ops->set_irq(hwif, 1);
 
-	if (request_irq(hwif->irq, &ide_intr, sa, hwif->name, hwif))
+	if (request_irq(hwif->irq, irq_handler, sa, hwif->name, hwif))
 		goto out_up;
 
 	if (!hwif->rqsize) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 1d8978b..a7b9287 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -231,7 +231,7 @@
 	IDE_PROC_DEVSET(pio_mode, 0, 255),
 	IDE_PROC_DEVSET(unmaskirq, 0, 1),
 	IDE_PROC_DEVSET(using_dma, 0, 1),
-	{ 0 },
+	{ NULL },
 };
 
 static void proc_ide_settings_warn(void)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index bb450a7..4e6181c 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -2166,7 +2166,7 @@
 	__IDE_PROC_DEVSET(speed,	0, 0xffff, NULL, NULL),
 	__IDE_PROC_DEVSET(tdsc,		IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX,
 					mulf_tdsc, divf_tdsc),
-	{ 0 },
+	{ NULL },
 };
 #endif
 
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index b4d44e5..8132533 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -212,6 +212,9 @@
 	hcall(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT, 0, 0);
 }
 
+/* An extern declaration inside a C file is bad form.  Don't do it. */
+extern void lguest_setup_irq(unsigned int irq);
+
 /* This routine finds the first virtqueue described in the configuration of
  * this device and sets it up.
  *
@@ -266,6 +269,9 @@
 		goto unmap;
 	}
 
+	/* Make sure the interrupt is allocated. */
+	lguest_setup_irq(lvq->config.irq);
+
 	/* Tell the interrupt for this virtqueue to go to the virtio_ring
 	 * interrupt handler. */
 	/* FIXME: We used to have a flag for the Host to tell us we could use
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 03b4cd0..a307f87 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -214,12 +214,7 @@
 	return mddev;
 }
 
-static void mddev_delayed_delete(struct work_struct *ws)
-{
-	mddev_t *mddev = container_of(ws, mddev_t, del_work);
-	kobject_del(&mddev->kobj);
-	kobject_put(&mddev->kobj);
-}
+static void mddev_delayed_delete(struct work_struct *ws);
 
 static void mddev_put(mddev_t *mddev)
 {
@@ -3542,6 +3537,21 @@
 
 int mdp_major = 0;
 
+static void mddev_delayed_delete(struct work_struct *ws)
+{
+	mddev_t *mddev = container_of(ws, mddev_t, del_work);
+
+	if (mddev->private == &md_redundancy_group) {
+		sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
+		if (mddev->sysfs_action)
+			sysfs_put(mddev->sysfs_action);
+		mddev->sysfs_action = NULL;
+		mddev->private = NULL;
+	}
+	kobject_del(&mddev->kobj);
+	kobject_put(&mddev->kobj);
+}
+
 static int md_alloc(dev_t dev, char *name)
 {
 	static DEFINE_MUTEX(disks_mutex);
@@ -4033,13 +4043,9 @@
 			mddev->queue->merge_bvec_fn = NULL;
 			mddev->queue->unplug_fn = NULL;
 			mddev->queue->backing_dev_info.congested_fn = NULL;
-			if (mddev->pers->sync_request) {
-				sysfs_remove_group(&mddev->kobj, &md_redundancy_group);
-				if (mddev->sysfs_action)
-					sysfs_put(mddev->sysfs_action);
-				mddev->sysfs_action = NULL;
-			}
 			module_put(mddev->pers->owner);
+			if (mddev->pers->sync_request)
+				mddev->private = &md_redundancy_group;
 			mddev->pers = NULL;
 			/* tell userspace to handle 'inactive' */
 			sysfs_notify_dirent(mddev->sysfs_state);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 9c50e6f..34ce270 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -248,12 +248,15 @@
 
 	sg_init_one(&sg, data_buf, len);
 
-	/*
-	 * The spec states that CSR and CID accesses have a timeout
-	 * of 64 clock cycles.
-	 */
-	data.timeout_ns = 0;
-	data.timeout_clks = 64;
+	if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
+		/*
+		 * The spec states that CSR and CID accesses have a timeout
+		 * of 64 clock cycles.
+		 */
+		data.timeout_ns = 0;
+		data.timeout_clks = 64;
+	} else
+		mmc_set_data_timeout(&data, card);
 
 	mmc_wait_for_req(host, &mrq);
 
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d44f741..6d9f810 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -821,7 +821,8 @@
 					if (!(info->flags & IS_POW2PS))
 						return info;
 				}
-			}
+			} else
+				return info;
 		}
 	}
 
diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c
index 4b122e7..2297182 100644
--- a/drivers/mtd/maps/physmap.c
+++ b/drivers/mtd/maps/physmap.c
@@ -46,16 +46,19 @@
 
 	physmap_data = dev->dev.platform_data;
 
+	if (info->cmtd) {
 #ifdef CONFIG_MTD_PARTITIONS
-	if (info->nr_parts) {
-		del_mtd_partitions(info->cmtd);
-		kfree(info->parts);
-	} else if (physmap_data->nr_parts)
-		del_mtd_partitions(info->cmtd);
-	else
-		del_mtd_device(info->cmtd);
+		if (info->nr_parts || physmap_data->nr_parts)
+			del_mtd_partitions(info->cmtd);
+		else
+			del_mtd_device(info->cmtd);
 #else
-	del_mtd_device(info->cmtd);
+		del_mtd_device(info->cmtd);
+#endif
+	}
+#ifdef CONFIG_MTD_PARTITIONS
+	if (info->nr_parts)
+		kfree(info->parts);
 #endif
 
 #ifdef CONFIG_MTD_CONCAT
diff --git a/drivers/net/arm/ks8695net.c b/drivers/net/arm/ks8695net.c
index 1cf2f94..f3a1274 100644
--- a/drivers/net/arm/ks8695net.c
+++ b/drivers/net/arm/ks8695net.c
@@ -560,7 +560,7 @@
 		msleep(1);
 	}
 
-	if (reset_timeout == 0) {
+	if (reset_timeout < 0) {
 		dev_crit(ksp->dev,
 			 "Timeout waiting for DMA engines to reset\n");
 		/* And blithely carry on */
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 9fb3883..e0578fe 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -4113,7 +4113,7 @@
 		const struct net_device_ops *slave_ops
 			= slave->dev->netdev_ops;
 		if (slave_ops->ndo_neigh_setup)
-			return slave_ops->ndo_neigh_setup(dev, parms);
+			return slave_ops->ndo_neigh_setup(slave->dev, parms);
 	}
 	return 0;
 }
diff --git a/drivers/net/jme.c b/drivers/net/jme.c
index 08b3405..a6e1a35 100644
--- a/drivers/net/jme.c
+++ b/drivers/net/jme.c
@@ -957,13 +957,14 @@
 		goto out_inc;
 
 	i = atomic_read(&rxring->next_to_clean);
-	while (limit-- > 0) {
+	while (limit > 0) {
 		rxdesc = rxring->desc;
 		rxdesc += i;
 
 		if ((rxdesc->descwb.flags & cpu_to_le16(RXWBFLAG_OWN)) ||
 		!(rxdesc->descwb.desccnt & RXWBDCNT_WBCPL))
 			goto out;
+		--limit;
 
 		desccnt = rxdesc->descwb.desccnt & RXWBDCNT_DCNT;
 
diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index e5cb6b1..2404a83 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -1035,7 +1035,8 @@
 	DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 		  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
 	while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
-		   (--worklimit >= 0)) {
+			worklimit > 0) {
+		worklimit--;
 		if (rx_status & 0x4000) { /* Error, update stats. */
 			short error = rx_status & 0x3800;
 			dev->stats.rx_errors++;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index 73ecc65..1e01b8a6 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -857,7 +857,8 @@
     DEBUG(3, "%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
 	  dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
     while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
-	   (--worklimit >= 0)) {
+		    worklimit > 0) {
+	worklimit--;
 	if (rx_status & 0x4000) { /* Error, update stats. */
 	    short error = rx_status & 0x3800;
 	    dev->stats.rx_errors++;
diff --git a/drivers/net/smc911x.h b/drivers/net/smc911x.h
index 870b4c3..a45952e 100644
--- a/drivers/net/smc911x.h
+++ b/drivers/net/smc911x.h
@@ -42,6 +42,16 @@
   #define SMC_USE_16BIT		0
   #define SMC_USE_32BIT		1
   #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+#elif defined(CONFIG_ARCH_OMAP34XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
+#elif defined(CONFIG_ARCH_OMAP24XX)
+  #define SMC_USE_16BIT		0
+  #define SMC_USE_32BIT		1
+  #define SMC_IRQ_SENSE		IRQF_TRIGGER_LOW
+  #define SMC_MEM_RESERVED	1
 #else
 /*
  * Default configuration
@@ -675,6 +685,7 @@
 #define CHIP_9116	0x0116
 #define CHIP_9117	0x0117
 #define CHIP_9118	0x0118
+#define CHIP_9211	0x9211
 #define CHIP_9215	0x115A
 #define CHIP_9217	0x117A
 #define CHIP_9218	0x118A
@@ -689,6 +700,7 @@
 	{ CHIP_9116, "LAN9116" },
 	{ CHIP_9117, "LAN9117" },
 	{ CHIP_9118, "LAN9118" },
+	{ CHIP_9211, "LAN9211" },
 	{ CHIP_9215, "LAN9215" },
 	{ CHIP_9217, "LAN9217" },
 	{ CHIP_9218, "LAN9218" },
diff --git a/drivers/net/sungem.c b/drivers/net/sungem.c
index 8d64b1d..0fcb750 100644
--- a/drivers/net/sungem.c
+++ b/drivers/net/sungem.c
@@ -1229,7 +1229,7 @@
 			break;
 	} while (val & (GREG_SWRST_TXRST | GREG_SWRST_RXRST));
 
-	if (limit <= 0)
+	if (limit < 0)
 		printk(KERN_ERR "%s: SW reset is ghetto.\n", gp->dev->name);
 
 	if (gp->phy_type == phy_serialink || gp->phy_type == phy_serdes)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index b080f94..dabdf59 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -1473,7 +1473,8 @@
 {
 	u32 reg;
 
-	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+	    GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906)
 		return;
 
 	reg = MII_TG3_MISC_SHDW_WREN |
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 5f60177..e2150b3 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -121,11 +121,6 @@
 		goto err_out_trdev;
 	}
 
-	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
-			  dev->name, dev);
-	if (ret)
-		goto err_out_region;
-
 	dev->base_addr	= pci_ioaddr;
 	dev->irq 	= pci_irq_line;
 	dev->dma	= 0;
@@ -142,7 +137,7 @@
 	ret = tmsdev_init(dev, &pdev->dev);
 	if (ret) {
 		printk("%s: unable to get memory for dev->priv.\n", dev->name);
-		goto err_out_irq;
+		goto err_out_region;
 	}
 
 	tp = netdev_priv(dev);
@@ -157,6 +152,11 @@
 
 	tp->tmspriv = cardinfo;
 
+	ret = request_irq(pdev->irq, tms380tr_interrupt, IRQF_SHARED,
+			  dev->name, dev);
+	if (ret)
+		goto err_out_tmsdev;
+
 	dev->open = tms380tr_open;
 	dev->stop = tms380tr_close;
 	pci_set_drvdata(pdev, dev);
@@ -164,15 +164,15 @@
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto err_out_tmsdev;
+		goto err_out_irq;
 	
 	return 0;
 
+err_out_irq:
+	free_irq(pdev->irq, dev);
 err_out_tmsdev:
 	pci_set_drvdata(pdev, NULL);
 	tmsdev_term(dev);
-err_out_irq:
-	free_irq(pdev->irq, dev);
 err_out_region:
 	release_region(pci_ioaddr, TMS_PCI_IO_EXTENT);
 err_out_trdev:
diff --git a/drivers/net/ucc_geth_mii.c b/drivers/net/ucc_geth_mii.c
index 5463591..0ada4ed 100644
--- a/drivers/net/ucc_geth_mii.c
+++ b/drivers/net/ucc_geth_mii.c
@@ -107,7 +107,7 @@
 static int uec_mdio_reset(struct mii_bus *bus)
 {
 	struct ucc_mii_mng __iomem *regs = (void __iomem *)bus->priv;
-	unsigned int timeout = PHY_INIT_TIMEOUT;
+	int timeout = PHY_INIT_TIMEOUT;
 
 	mutex_lock(&bus->mdio_lock);
 
@@ -123,7 +123,7 @@
 
 	mutex_unlock(&bus->mdio_lock);
 
-	if (timeout <= 0) {
+	if (timeout < 0) {
 		printk(KERN_ERR "%s: The MII Bus is stuck!\n", bus->name);
 		return -EBUSY;
 	}
diff --git a/drivers/net/usb/dm9601.c b/drivers/net/usb/dm9601.c
index 5b67bbf..81682c6 100644
--- a/drivers/net/usb/dm9601.c
+++ b/drivers/net/usb/dm9601.c
@@ -635,6 +635,10 @@
 	USB_DEVICE(0x0a47, 0x9601),	/* Hirose USB-100 */
 	.driver_info = (unsigned long)&dm9601_info,
 	 },
+	{
+	USB_DEVICE(0x0fe6, 0x8101),	/* DM9601 USB to Fast Ethernet Adapter */
+	.driver_info = (unsigned long)&dm9601_info,
+	 },
 	{},			// END
 };
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 36bafeb3..129e2d3 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3868,7 +3868,7 @@
 	}
 	err = iwl_eeprom_check_version(priv);
 	if (err)
-		goto out_iounmap;
+		goto out_free_eeprom;
 
 	/* extract MAC Address */
 	iwl_eeprom_get_mac(priv, priv->mac_addr);
@@ -3945,6 +3945,8 @@
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl_attribute_group);
  out_uninit_drv:
 	iwl_uninit_drv(priv);
@@ -3953,8 +3955,8 @@
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
-	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_release_regions(pdev);
  out_pci_disable_device:
 	pci_disable_device(pdev);
  out_ieee80211_free_hw:
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 93be74a..57dd34e 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -7911,7 +7911,7 @@
 				CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000);
 	if (err < 0) {
 		IWL_DEBUG_INFO("Failed to init the card\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 
 	/***********************
@@ -7921,7 +7921,7 @@
 	err = iwl3945_eeprom_init(priv);
 	if (err) {
 		IWL_ERROR("Unable to init EEPROM\n");
-		goto out_remove_sysfs;
+		goto out_iounmap;
 	}
 	/* MAC Address location in EEPROM same for 3945/4965 */
 	get_eeprom_mac(priv, priv->mac_addr);
@@ -7975,7 +7975,7 @@
 	err = iwl3945_init_channel_map(priv);
 	if (err) {
 		IWL_ERROR("initializing regulatory failed: %d\n", err);
-		goto out_release_irq;
+		goto out_unset_hw_setting;
 	}
 
 	err = iwl3945_init_geos(priv);
@@ -8045,25 +8045,22 @@
 	return 0;
 
  out_remove_sysfs:
+	destroy_workqueue(priv->workqueue);
+	priv->workqueue = NULL;
 	sysfs_remove_group(&pdev->dev.kobj, &iwl3945_attribute_group);
  out_free_geos:
 	iwl3945_free_geos(priv);
  out_free_channel_map:
 	iwl3945_free_channel_map(priv);
-
-
- out_release_irq:
-	destroy_workqueue(priv->workqueue);
-	priv->workqueue = NULL;
+ out_unset_hw_setting:
 	iwl3945_unset_hw_setting(priv);
-
  out_iounmap:
 	pci_iounmap(pdev, priv->hw_base);
  out_pci_release_regions:
 	pci_release_regions(pdev);
  out_pci_disable_device:
-	pci_disable_device(pdev);
 	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
  out_ieee80211_free_hw:
 	ieee80211_free_hw(priv->hw);
  out:
diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c
index 34561e6..f170106 100644
--- a/drivers/net/wireless/p54/p54common.c
+++ b/drivers/net/wireless/p54/p54common.c
@@ -710,10 +710,11 @@
 					   __le32 req_id)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	unsigned long flags;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct p54_hdr *hdr = (struct p54_hdr *) entry->data;
 
@@ -732,7 +733,7 @@
 	struct p54_common *priv = dev->priv;
 	struct p54_hdr *hdr = (struct p54_hdr *) skb->data;
 	struct p54_frame_sent *payload = (struct p54_frame_sent *) hdr->data;
-	struct sk_buff *entry = (struct sk_buff *) priv->tx_queue.next;
+	struct sk_buff *entry;
 	u32 addr = le32_to_cpu(hdr->req_id) - priv->headroom;
 	struct memrecord *range = NULL;
 	u32 freed = 0;
@@ -741,6 +742,7 @@
 	int count, idx;
 
 	spin_lock_irqsave(&priv->tx_queue.lock, flags);
+	entry = (struct sk_buff *) priv->tx_queue.next;
 	while (entry != (struct sk_buff *)&priv->tx_queue) {
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry);
 		struct p54_hdr *entry_hdr;
@@ -976,7 +978,7 @@
 			       struct p54_hdr *data, u32 len)
 {
 	struct p54_common *priv = dev->priv;
-	struct sk_buff *entry = priv->tx_queue.next;
+	struct sk_buff *entry;
 	struct sk_buff *target_skb = NULL;
 	struct ieee80211_tx_info *info;
 	struct memrecord *range;
@@ -1014,6 +1016,7 @@
 		}
 	}
 
+	entry = priv->tx_queue.next;
 	while (left--) {
 		u32 hole_size;
 		info = IEEE80211_SKB_CB(entry);
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index af6b584..3e2ac2b 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1952,6 +1952,8 @@
 	{ USB_DEVICE(0x13b1, 0x000d), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x0011), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x13b1, 0x001a), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* CNet */
+	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Conceptronic */
 	{ USB_DEVICE(0x14b2, 0x3c02), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* D-LINK */
@@ -1976,14 +1978,20 @@
 	{ USB_DEVICE(0x148f, 0x2570), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ USB_DEVICE(0x148f, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* Sagem */
+	{ USB_DEVICE(0x079b, 0x004b), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Siemens */
 	{ USB_DEVICE(0x0681, 0x3c06), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* SMC */
 	{ USB_DEVICE(0x0707, 0xee13), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Spairon */
 	{ USB_DEVICE(0x114b, 0x0110), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* SURECOM */
+	{ USB_DEVICE(0x0769, 0x11f3), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Trust */
 	{ USB_DEVICE(0x0eb0, 0x9020), USB_DEVICE_DATA(&rt2500usb_ops) },
+	/* VTech */
+	{ USB_DEVICE(0x0f88, 0x3012), USB_DEVICE_DATA(&rt2500usb_ops) },
 	/* Zinwell */
 	{ USB_DEVICE(0x5a57, 0x0260), USB_DEVICE_DATA(&rt2500usb_ops) },
 	{ 0, }
diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c
index 96a8d69..cefee1b 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.c
+++ b/drivers/net/wireless/rt2x00/rt73usb.c
@@ -2281,7 +2281,18 @@
  */
 static struct usb_device_id rt73usb_device_table[] = {
 	/* AboCom */
+	{ USB_DEVICE(0x07b8, 0xb21b), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21c), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21e), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x07b8, 0xb21f), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AL */
+	{ USB_DEVICE(0x14b2, 0x3c10), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Amigo */
+	{ USB_DEVICE(0x148f, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0eb0, 0x9021), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* AMIT  */
+	{ USB_DEVICE(0x18c5, 0x0002), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Askey */
 	{ USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* ASUS */
@@ -2294,7 +2305,9 @@
 	{ USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Billionton */
 	{ USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x08dd, 0x0120), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Buffalo */
+	{ USB_DEVICE(0x0411, 0x00d8), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* CNet */
 	{ USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
@@ -2308,6 +2321,11 @@
 	{ USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Edimax */
+	{ USB_DEVICE(0x7392, 0x7318), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x7392, 0x7618), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* EnGenius */
+	{ USB_DEVICE(0x1740, 0x3701), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gemtek */
 	{ USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Gigabyte */
@@ -2328,22 +2346,34 @@
 	{ USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Ralink */
+	{ USB_DEVICE(0x04bb, 0x093d), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Qcom */
 	{ USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Samsung */
+	{ USB_DEVICE(0x04e8, 0x4471), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Senao */
 	{ USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Sitecom */
-	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0024), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x0027), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x002f), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
+	{ USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Surecom */
 	{ USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Philips */
+	{ USB_DEVICE(0x0471, 0x200a), USB_DEVICE_DATA(&rt73usb_ops) },
 	/* Planex */
 	{ USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* Zcom */
+	{ USB_DEVICE(0x0cde, 0x001c), USB_DEVICE_DATA(&rt73usb_ops) },
+	/* ZyXEL */
+	{ USB_DEVICE(0x0586, 0x3415), USB_DEVICE_DATA(&rt73usb_ops) },
 	{ 0, }
 };
 
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/i810/i810_main.c
index a24e680..2e94019 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/i810/i810_main.c
@@ -993,6 +993,7 @@
 	struct i810fb_par *par = info->par;
 	int line_length, vidmem, mode_valid = 0, retval = 0;
 	u32 vyres = var->yres_virtual, vxres = var->xres_virtual;
+
 	/*
 	 *  Memory limit
 	 */
@@ -1002,12 +1003,12 @@
 	if (vidmem > par->fb.size) {
 		vyres = par->fb.size/line_length;
 		if (vyres < var->yres) {
-			vyres = yres;
+			vyres = info->var.yres;
 			vxres = par->fb.size/vyres;
 			vxres /= var->bits_per_pixel >> 3;
 			line_length = get_line_length(par, vxres, 
 						      var->bits_per_pixel);
-			vidmem = line_length * yres;
+			vidmem = line_length * info->var.yres;
 			if (vxres < var->xres) {
 				printk("i810fb: required video memory, "
 				       "%d bytes, for %dx%d-%d (virtual) "
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 0e2b8fd..2c5d069 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -446,7 +446,6 @@
 {
 	struct sh_mobile_lcdc_chan *ch;
 	struct sh_mobile_lcdc_board_cfg	*board_cfg;
-	unsigned long tmp;
 	int k;
 
 	/* tell the board code to disable the panel */
@@ -456,9 +455,8 @@
 		if (board_cfg->display_off)
 			board_cfg->display_off(board_cfg->board_data);
 
-		/* cleanup deferred io if SYS bus */
-		tmp = ch->cfg.sys_bus_cfg.deferred_io_msec;
-		if (ch->ldmt1r_value & (1 << 12) && tmp) {
+		/* cleanup deferred io if enabled */
+		if (ch->info.fbdefio) {
 			fb_deferred_io_cleanup(&ch->info);
 			ch->info.fbdefio = NULL;
 		}
diff --git a/drivers/watchdog/gef_wdt.c b/drivers/watchdog/gef_wdt.c
index f0c2b7a..734d980 100644
--- a/drivers/watchdog/gef_wdt.c
+++ b/drivers/watchdog/gef_wdt.c
@@ -269,7 +269,7 @@
 	bus_clk = 133; /* in MHz */
 
 	freq = fsl_get_sys_freq();
-	if (freq > 0)
+	if (freq != -1)
 		bus_clk = freq;
 
 	/* Map devices registers into memory */
diff --git a/drivers/watchdog/ks8695_wdt.c b/drivers/watchdog/ks8695_wdt.c
index 0b798fd..74c92d3 100644
--- a/drivers/watchdog/ks8695_wdt.c
+++ b/drivers/watchdog/ks8695_wdt.c
@@ -21,6 +21,7 @@
 #include <linux/watchdog.h>
 #include <linux/io.h>
 #include <linux/uaccess.h>
+#include <mach/timex.h>
 #include <mach/regs-timer.h>
 
 #define WDT_DEFAULT_TIME	5	/* seconds */
diff --git a/drivers/watchdog/orion5x_wdt.c b/drivers/watchdog/orion5x_wdt.c
index 14a339f..b64ae1a 100644
--- a/drivers/watchdog/orion5x_wdt.c
+++ b/drivers/watchdog/orion5x_wdt.c
@@ -29,6 +29,7 @@
 #define  WDT_EN			0x0010
 #define WDT_VAL			(TIMER_VIRT_BASE + 0x0024)
 
+#define ORION5X_TCLK		166666667
 #define WDT_MAX_DURATION	(0xffffffff / ORION5X_TCLK)
 #define WDT_IN_USE		0
 #define WDT_OK_TO_CLOSE		1
diff --git a/drivers/watchdog/rc32434_wdt.c b/drivers/watchdog/rc32434_wdt.c
index 57027f4..f3553fa 100644
--- a/drivers/watchdog/rc32434_wdt.c
+++ b/drivers/watchdog/rc32434_wdt.c
@@ -34,104 +34,89 @@
 #include <asm/time.h>
 #include <asm/mach-rc32434/integ.h>
 
-#define MAX_TIMEOUT			20
-#define RC32434_WDT_INTERVAL		(15 * HZ)
-
-#define VERSION "0.2"
+#define VERSION "0.4"
 
 static struct {
-	struct completion stop;
-	int running;
-	struct timer_list timer;
-	int queue;
-	int default_ticks;
 	unsigned long inuse;
 } rc32434_wdt_device;
 
 static struct integ __iomem *wdt_reg;
-static int ticks = 100 * HZ;
 
 static int expect_close;
-static int timeout;
+
+/* Board internal clock speed in Hz,
+ * the watchdog timer ticks at. */
+extern unsigned int idt_cpu_freq;
+
+/* translate wtcompare value to seconds and vice versa */
+#define WTCOMP2SEC(x)	(x / idt_cpu_freq)
+#define SEC2WTCOMP(x)	(x * idt_cpu_freq)
+
+/* Use a default timeout of 20s. This should be
+ * safe for CPU clock speeds up to 400MHz, as
+ * ((2 ^ 32) - 1) / (400MHz / 2) = 21s.  */
+#define WATCHDOG_TIMEOUT 20
+
+static int timeout = WATCHDOG_TIMEOUT;
 
 static int nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, int, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+/* apply or and nand masks to data read from addr and write back */
+#define SET_BITS(addr, or, nand) \
+	writel((readl(&addr) | or) & ~nand, &addr)
 
 static void rc32434_wdt_start(void)
 {
-	u32 val;
+	u32 or, nand;
 
-	if (!rc32434_wdt_device.inuse) {
-		writel(0, &wdt_reg->wtcount);
+	/* zero the counter before enabling */
+	writel(0, &wdt_reg->wtcount);
 
-		val = RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) | val, &wdt_reg->errcs);
+	/* don't generate a non-maskable interrupt,
+	 * do a warm reset instead */
+	nand = 1 << RC32434_ERR_WNE;
+	or = 1 << RC32434_ERR_WRE;
 
-		val = RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) | val, &wdt_reg->wtc);
-	}
-	rc32434_wdt_device.running++;
+	/* reset the ERRCS timeout bit in case it's set */
+	nand |= 1 << RC32434_ERR_WTO;
+
+	SET_BITS(wdt_reg->errcs, or, nand);
+
+	/* reset WTC timeout bit and enable WDT */
+	nand = 1 << RC32434_WTC_TO;
+	or = 1 << RC32434_WTC_EN;
+
+	SET_BITS(wdt_reg->wtc, or, nand);
 }
 
 static void rc32434_wdt_stop(void)
 {
-	u32 val;
+	/* Disable WDT */
+	SET_BITS(wdt_reg->wtc, 0, 1 << RC32434_WTC_EN);
+}
 
-	if (rc32434_wdt_device.running) {
+static int rc32434_wdt_set(int new_timeout)
+{
+	int max_to = WTCOMP2SEC((u32)-1);
 
-		val = ~RC32434_WTC_EN;
-		writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
-
-		val = ~RC32434_ERR_WRE;
-		writel(readl(&wdt_reg->errcs) & val, &wdt_reg->errcs);
-
-		rc32434_wdt_device.running = 0;
+	if (new_timeout < 0 || new_timeout > max_to) {
+		printk(KERN_ERR KBUILD_MODNAME
+			": timeout value must be between 0 and %d",
+			max_to);
+		return -EINVAL;
 	}
-}
-
-static void rc32434_wdt_set(int new_timeout)
-{
-	u32 cmp = new_timeout * HZ;
-	u32 state, val;
-
 	timeout = new_timeout;
-	/*
-	 * store and disable WTC
-	 */
-	state = (u32)(readl(&wdt_reg->wtc) & RC32434_WTC_EN);
-	val = ~RC32434_WTC_EN;
-	writel(readl(&wdt_reg->wtc) & val, &wdt_reg->wtc);
+	writel(SEC2WTCOMP(timeout), &wdt_reg->wtcompare);
 
-	writel(0, &wdt_reg->wtcount);
-	writel(cmp, &wdt_reg->wtcompare);
-
-	/*
-	 * restore WTC
-	 */
-
-	writel(readl(&wdt_reg->wtc) | state, &wdt_reg);
+	return 0;
 }
 
-static void rc32434_wdt_reset(void)
+static void rc32434_wdt_ping(void)
 {
-	ticks = rc32434_wdt_device.default_ticks;
-}
-
-static void rc32434_wdt_update(unsigned long unused)
-{
-	if (rc32434_wdt_device.running)
-		ticks--;
-
 	writel(0, &wdt_reg->wtcount);
-
-	if (rc32434_wdt_device.queue && ticks)
-		mod_timer(&rc32434_wdt_device.timer,
-			jiffies + RC32434_WDT_INTERVAL);
-	else
-		complete(&rc32434_wdt_device.stop);
 }
 
 static int rc32434_wdt_open(struct inode *inode, struct file *file)
@@ -142,19 +127,23 @@
 	if (nowayout)
 		__module_get(THIS_MODULE);
 
+	rc32434_wdt_start();
+	rc32434_wdt_ping();
+
 	return nonseekable_open(inode, file);
 }
 
 static int rc32434_wdt_release(struct inode *inode, struct file *file)
 {
-	if (expect_close && nowayout == 0) {
+	if (expect_close == 42) {
 		rc32434_wdt_stop();
 		printk(KERN_INFO KBUILD_MODNAME ": disabling watchdog timer\n");
 		module_put(THIS_MODULE);
-	} else
+	} else {
 		printk(KERN_CRIT KBUILD_MODNAME
 			": device closed unexpectedly. WDT will not stop !\n");
-
+		rc32434_wdt_ping();
+	}
 	clear_bit(0, &rc32434_wdt_device.inuse);
 	return 0;
 }
@@ -174,10 +163,10 @@
 				if (get_user(c, data + i))
 					return -EFAULT;
 				if (c == 'V')
-					expect_close = 1;
+					expect_close = 42;
 			}
 		}
-		rc32434_wdt_update(0);
+		rc32434_wdt_ping();
 		return len;
 	}
 	return 0;
@@ -197,11 +186,11 @@
 	};
 	switch (cmd) {
 	case WDIOC_KEEPALIVE:
-		rc32434_wdt_reset();
+		rc32434_wdt_ping();
 		break;
 	case WDIOC_GETSTATUS:
 	case WDIOC_GETBOOTSTATUS:
-		value = readl(&wdt_reg->wtcount);
+		value = 0;
 		if (copy_to_user(argp, &value, sizeof(int)))
 			return -EFAULT;
 		break;
@@ -218,6 +207,7 @@
 			break;
 		case WDIOS_DISABLECARD:
 			rc32434_wdt_stop();
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -225,11 +215,9 @@
 	case WDIOC_SETTIMEOUT:
 		if (copy_from_user(&new_timeout, argp, sizeof(int)))
 			return -EFAULT;
-		if (new_timeout < 1)
+		if (rc32434_wdt_set(new_timeout))
 			return -EINVAL;
-		if (new_timeout > MAX_TIMEOUT)
-			return -EINVAL;
-		rc32434_wdt_set(new_timeout);
+		/* Fall through */
 	case WDIOC_GETTIMEOUT:
 		return copy_to_user(argp, &timeout, sizeof(int));
 	default:
@@ -254,15 +242,15 @@
 	.fops	= &rc32434_wdt_fops,
 };
 
-static char banner[] = KERN_INFO KBUILD_MODNAME
+static char banner[] __devinitdata = KERN_INFO KBUILD_MODNAME
 		": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
 
-static int rc32434_wdt_probe(struct platform_device *pdev)
+static int __devinit rc32434_wdt_probe(struct platform_device *pdev)
 {
 	int ret;
 	struct resource *r;
 
-	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb500_wdt_res");
+	r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "rb532_wdt_res");
 	if (!r) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to retrieve resources\n");
@@ -277,24 +265,12 @@
 	}
 
 	ret = misc_register(&rc32434_wdt_miscdev);
-
 	if (ret < 0) {
 		printk(KERN_ERR KBUILD_MODNAME
 			"failed to register watchdog device\n");
 		goto unmap;
 	}
 
-	init_completion(&rc32434_wdt_device.stop);
-	rc32434_wdt_device.queue = 0;
-
-	clear_bit(0, &rc32434_wdt_device.inuse);
-
-	setup_timer(&rc32434_wdt_device.timer, rc32434_wdt_update, 0L);
-
-	rc32434_wdt_device.default_ticks = ticks;
-
-	rc32434_wdt_start();
-
 	printk(banner, timeout);
 
 	return 0;
@@ -304,23 +280,17 @@
 	return ret;
 }
 
-static int rc32434_wdt_remove(struct platform_device *pdev)
+static int __devexit rc32434_wdt_remove(struct platform_device *pdev)
 {
-	if (rc32434_wdt_device.queue) {
-		rc32434_wdt_device.queue = 0;
-		wait_for_completion(&rc32434_wdt_device.stop);
-	}
 	misc_deregister(&rc32434_wdt_miscdev);
-
 	iounmap(wdt_reg);
-
 	return 0;
 }
 
 static struct platform_driver rc32434_wdt = {
 	.probe	= rc32434_wdt_probe,
-	.remove = rc32434_wdt_remove,
-	.driver = {
+	.remove	= __devexit_p(rc32434_wdt_remove),
+	.driver	= {
 		.name = "rc32434_wdt",
 	}
 };
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 42491d7..37f31b5 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -277,7 +277,7 @@
 	if (*cow_ret == buf)
 		unlock_orig = 1;
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 
 	if (parent)
 		parent_start = parent->start;
@@ -2365,7 +2365,7 @@
 	if (slot >= btrfs_header_nritems(upper) - 1)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	right = read_node_slot(root, upper, slot + 1);
 	btrfs_tree_lock(right);
@@ -2562,7 +2562,7 @@
 	if (right_nritems == 0)
 		return 1;
 
-	WARN_ON(!btrfs_tree_locked(path->nodes[1]));
+	btrfs_assert_tree_locked(path->nodes[1]);
 
 	left = read_node_slot(root, path->nodes[1], slot - 1);
 	btrfs_tree_lock(left);
@@ -4101,7 +4101,7 @@
 
 		next = read_node_slot(root, c, slot);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(c));
+			btrfs_assert_tree_locked(c);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
@@ -4126,7 +4126,7 @@
 			reada_for_search(root, path, level, slot, 0);
 		next = read_node_slot(root, next, 0);
 		if (!path->skip_locking) {
-			WARN_ON(!btrfs_tree_locked(path->nodes[level]));
+			btrfs_assert_tree_locked(path->nodes[level]);
 			btrfs_tree_lock(next);
 			btrfs_set_lock_blocking(next);
 		}
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index adda739..3e18175 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -857,7 +857,7 @@
 	struct inode *btree_inode = root->fs_info->btree_inode;
 	if (btrfs_header_generation(buf) ==
 	    root->fs_info->running_transaction->transid) {
-		WARN_ON(!btrfs_tree_locked(buf));
+		btrfs_assert_tree_locked(buf);
 
 		/* ugh, clear_extent_buffer_dirty can be expensive */
 		btrfs_set_lock_blocking(buf);
@@ -2361,7 +2361,7 @@
 
 	btrfs_set_lock_blocking(buf);
 
-	WARN_ON(!btrfs_tree_locked(buf));
+	btrfs_assert_tree_locked(buf);
 	if (transid != root->fs_info->generation) {
 		printk(KERN_CRIT "btrfs transid mismatch buffer %llu, "
 		       "found %llu running %llu\n",
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index 6b5966a..9abf81f 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -4418,13 +4418,13 @@
 	path = btrfs_alloc_path();
 	BUG_ON(!path);
 
-	BUG_ON(!btrfs_tree_locked(parent));
+	btrfs_assert_tree_locked(parent);
 	parent_level = btrfs_header_level(parent);
 	extent_buffer_get(parent);
 	path->nodes[parent_level] = parent;
 	path->slots[parent_level] = btrfs_header_nritems(parent);
 
-	BUG_ON(!btrfs_tree_locked(node));
+	btrfs_assert_tree_locked(node);
 	level = btrfs_header_level(node);
 	extent_buffer_get(node);
 	path->nodes[level] = node;
diff --git a/fs/btrfs/locking.c b/fs/btrfs/locking.c
index 85506c4..47b0a88 100644
--- a/fs/btrfs/locking.c
+++ b/fs/btrfs/locking.c
@@ -220,8 +220,8 @@
 	return 0;
 }
 
-int btrfs_tree_locked(struct extent_buffer *eb)
+void btrfs_assert_tree_locked(struct extent_buffer *eb)
 {
-	return test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags) ||
-			spin_is_locked(&eb->lock);
+	if (!test_bit(EXTENT_BUFFER_BLOCKING, &eb->bflags))
+		assert_spin_locked(&eb->lock);
 }
diff --git a/fs/btrfs/locking.h b/fs/btrfs/locking.h
index 6bb0afb..6c4ce45 100644
--- a/fs/btrfs/locking.h
+++ b/fs/btrfs/locking.h
@@ -21,11 +21,11 @@
 
 int btrfs_tree_lock(struct extent_buffer *eb);
 int btrfs_tree_unlock(struct extent_buffer *eb);
-int btrfs_tree_locked(struct extent_buffer *eb);
 
 int btrfs_try_tree_lock(struct extent_buffer *eb);
 int btrfs_try_spin_lock(struct extent_buffer *eb);
 
 void btrfs_set_lock_blocking(struct extent_buffer *eb);
 void btrfs_clear_lock_blocking(struct extent_buffer *eb);
+void btrfs_assert_tree_locked(struct extent_buffer *eb);
 #endif
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 5f3231b..bff4052 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -198,9 +198,6 @@
 
 	fsi->ptmx_dentry = dentry;
 	rc = 0;
-
-	printk(KERN_DEBUG "Created ptmx node in devpts ino %lu\n",
-			inode->i_ino);
 out:
 	mutex_unlock(&root->d_inode->i_mutex);
 	return rc;
@@ -369,8 +366,6 @@
 	struct pts_fs_info *fsi;
 	struct pts_mount_opts *opts;
 
-	printk(KERN_NOTICE "devpts: newinstance mount\n");
-
 	err = get_sb_nodev(fs_type, flags, data, devpts_fill_super, mnt);
 	if (err)
 		return err;
diff --git a/fs/ext4/ialloc.c b/fs/ext4/ialloc.c
index f18a919..627f8c3 100644
--- a/fs/ext4/ialloc.c
+++ b/fs/ext4/ialloc.c
@@ -188,7 +188,7 @@
 	struct ext4_group_desc *gdp;
 	struct ext4_super_block *es;
 	struct ext4_sb_info *sbi;
-	int fatal = 0, err, count;
+	int fatal = 0, err, count, cleared;
 	ext4_group_t flex_group;
 
 	if (atomic_read(&inode->i_count) > 1) {
@@ -248,8 +248,10 @@
 		goto error_return;
 
 	/* Ok, now we can actually update the inode bitmaps.. */
-	if (!ext4_clear_bit_atomic(sb_bgl_lock(sbi, block_group),
-					bit, bitmap_bh->b_data))
+	spin_lock(sb_bgl_lock(sbi, block_group));
+	cleared = ext4_clear_bit(bit, bitmap_bh->b_data);
+	spin_unlock(sb_bgl_lock(sbi, block_group));
+	if (!cleared)
 		ext4_error(sb, "ext4_free_inode",
 			   "bit already cleared for inode %lu", ino);
 	else {
diff --git a/fs/fat/inode.c b/fs/fat/inode.c
index 6b74d09..de0004f 100644
--- a/fs/fat/inode.c
+++ b/fs/fat/inode.c
@@ -202,9 +202,9 @@
 	sector_t blocknr;
 
 	/* fat_get_cluster() assumes the requested blocknr isn't truncated. */
-	mutex_lock(&mapping->host->i_mutex);
+	down_read(&mapping->host->i_alloc_sem);
 	blocknr = generic_block_bmap(mapping, block, fat_get_block);
-	mutex_unlock(&mapping->host->i_mutex);
+	up_read(&mapping->host->i_alloc_sem);
 
 	return blocknr;
 }
diff --git a/fs/proc/page.c b/fs/proc/page.c
index 2d13451..e998383 100644
--- a/fs/proc/page.c
+++ b/fs/proc/page.c
@@ -80,7 +80,7 @@
 #define KPF_RECLAIM    9
 #define KPF_BUDDY     10
 
-#define kpf_copy_bit(flags, srcpos, dstpos) (((flags >> srcpos) & 1) << dstpos)
+#define kpf_copy_bit(flags, dstpos, srcpos) (((flags >> srcpos) & 1) << dstpos)
 
 static ssize_t kpageflags_read(struct file *file, char __user *buf,
 			     size_t count, loff_t *ppos)
diff --git a/fs/squashfs/block.c b/fs/squashfs/block.c
index c837dfc..321728f 100644
--- a/fs/squashfs/block.c
+++ b/fs/squashfs/block.c
@@ -80,7 +80,7 @@
  * generated a larger block - this does occasionally happen with zlib).
  */
 int squashfs_read_data(struct super_block *sb, void **buffer, u64 index,
-			int length, u64 *next_index, int srclength)
+			int length, u64 *next_index, int srclength, int pages)
 {
 	struct squashfs_sb_info *msblk = sb->s_fs_info;
 	struct buffer_head **bh;
@@ -185,6 +185,14 @@
 			}
 
 			if (msblk->stream.avail_out == 0) {
+				if (page == pages) {
+					ERROR("zlib_inflate tried to "
+						"decompress too much data, "
+						"expected %d bytes.  Zlib "
+						"data probably corrupt\n",
+						srclength);
+					goto release_mutex;
+				}
 				msblk->stream.next_out = buffer[page++];
 				msblk->stream.avail_out = PAGE_CACHE_SIZE;
 			}
@@ -268,7 +276,8 @@
 		put_bh(bh[k]);
 
 read_failure:
-	ERROR("sb_bread failed reading block 0x%llx\n", cur_index);
+	ERROR("squashfs_read_data failed to read block 0x%llx\n",
+					(unsigned long long) index);
 	kfree(bh);
 	return -EIO;
 }
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index f29eda1..1c4739e 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -119,7 +119,7 @@
 
 			entry->length = squashfs_read_data(sb, entry->data,
 				block, length, &entry->next_index,
-				cache->block_size);
+				cache->block_size, cache->pages);
 
 			spin_lock(&cache->lock);
 
@@ -406,7 +406,7 @@
 	for (i = 0; i < pages; i++, buffer += PAGE_CACHE_SIZE)
 		data[i] = buffer;
 	res = squashfs_read_data(sb, data, block, length |
-		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length);
+		SQUASHFS_COMPRESSED_BIT_BLOCK, NULL, length, pages);
 	kfree(data);
 	return res;
 }
diff --git a/fs/squashfs/inode.c b/fs/squashfs/inode.c
index 7a63398..9101dbd 100644
--- a/fs/squashfs/inode.c
+++ b/fs/squashfs/inode.c
@@ -133,7 +133,8 @@
 	type = le16_to_cpu(sqshb_ino->inode_type);
 	switch (type) {
 	case SQUASHFS_REG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_reg_inode *sqsh_ino = &squashfs_ino.reg;
 
@@ -175,7 +176,8 @@
 		break;
 	}
 	case SQUASHFS_LREG_TYPE: {
-		unsigned int frag_offset, frag_size, frag;
+		unsigned int frag_offset, frag;
+		int frag_size;
 		u64 frag_blk;
 		struct squashfs_lreg_inode *sqsh_ino = &squashfs_ino.lreg;
 
diff --git a/fs/squashfs/squashfs.h b/fs/squashfs/squashfs.h
index 6b2515d..0e9feb6 100644
--- a/fs/squashfs/squashfs.h
+++ b/fs/squashfs/squashfs.h
@@ -34,7 +34,7 @@
 
 /* block.c */
 extern int squashfs_read_data(struct super_block *, void **, u64, int, u64 *,
-				int);
+				int, int);
 
 /* cache.c */
 extern struct squashfs_cache *squashfs_cache_init(char *, int, int);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index 071df5b..681ec0d 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -389,7 +389,7 @@
 		return err;
 	}
 
-	printk(KERN_INFO "squashfs: version 4.0 (2009/01/03) "
+	printk(KERN_INFO "squashfs: version 4.0 (2009/01/31) "
 		"Phillip Lougher\n");
 
 	return 0;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 08a86d5..9a061ac 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -89,6 +89,8 @@
 	ATA_ID_DLF		= 128,
 	ATA_ID_CSFO		= 129,
 	ATA_ID_CFA_POWER	= 160,
+	ATA_ID_CFA_KEY_MGMT	= 162,
+	ATA_ID_CFA_MODES	= 163,
 	ATA_ID_ROT_SPEED	= 217,
 	ATA_ID_PIO4		= (1 << 1),
 
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 384b38d..1610427 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -234,7 +234,6 @@
 	int	(*suspend)	(struct cpufreq_policy *policy, pm_message_t pmsg);
 	int	(*resume)	(struct cpufreq_policy *policy);
 	struct freq_attr	**attr;
-	bool			hide_interface;
 };
 
 /* flags */
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index f041384..1956c8d 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -97,7 +97,6 @@
 
 /**
  * struct dma_chan_percpu - the per-CPU part of struct dma_chan
- * @refcount: local_t used for open-coded "bigref" counting
  * @memcpy_count: transaction counter
  * @bytes_transferred: byte counter
  */
@@ -114,9 +113,6 @@
  * @cookie: last cookie value returned to client
  * @chan_id: channel ID for sysfs
  * @dev: class device for sysfs
- * @refcount: kref, used in "bigref" slow-mode
- * @slow_ref: indicates that the DMA channel is free
- * @rcu: the DMA channel's RCU head
  * @device_node: used to add this to the device chan list
  * @local: per-cpu pointer to a struct dma_chan_percpu
  * @client-count: how many clients are using this channel
@@ -213,8 +209,6 @@
  * @global_node: list_head for global dma_device_list
  * @cap_mask: one or more dma_capability flags
  * @max_xor: maximum number of xor sources, 0 if no capability
- * @refcount: reference count
- * @done: IO completion struct
  * @dev_id: unique device ID
  * @dev: struct device reference for dma mapping api
  * @device_alloc_chan_resources: allocate resources and return the
@@ -227,6 +221,7 @@
  * @device_prep_dma_interrupt: prepares an end of chain interrupt operation
  * @device_prep_slave_sg: prepares a slave dma operation
  * @device_terminate_all: terminate all pending operations
+ * @device_is_tx_complete: poll for transaction completion
  * @device_issue_pending: push pending transactions to hardware
  */
 struct dma_device {
diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index c37e924..ed21bd3 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -511,7 +511,6 @@
 	unsigned short	words69_70[2];	/* reserved words 69-70
 					 * future command overlap and queuing
 					 */
-	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
 	unsigned short	words71_74[4];	/* reserved words 71-74
 					 * for IDENTIFY PACKET DEVICE command
 					 */
diff --git a/include/linux/ide.h b/include/linux/ide.h
index fe235b6..e0cedfe 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -866,6 +866,7 @@
 	unsigned int	n_ports;
 	struct device	*dev[2];
 	unsigned int	(*init_chipset)(struct pci_dev *);
+	irq_handler_t	irq_handler;
 	unsigned long	host_flags;
 	void		*host_priv;
 	ide_hwif_t	*cur_port;	/* for hosts requiring serialization */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5d87bc0..dc18b87 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -275,7 +275,7 @@
 	 * advised to wait only for the following duration before
 	 * doing SRST.
 	 */
-	ATA_TMOUT_PMP_SRST_WAIT	= 1000,
+	ATA_TMOUT_PMP_SRST_WAIT	= 5000,
 
 	/* ATA bus states */
 	BUS_UNKNOWN		= 0,
@@ -530,6 +530,7 @@
 	unsigned long		flags;		/* ATA_QCFLAG_xxx */
 	unsigned int		tag;
 	unsigned int		n_elem;
+	unsigned int		orig_n_elem;
 
 	int			dma_dir;
 
@@ -750,7 +751,8 @@
 	acpi_handle		acpi_handle;
 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
 #endif
-	u8			sector_buf[ATA_SECT_SIZE]; /* owned by EH */
+	/* owned by EH */
+	u8			sector_buf[ATA_SECT_SIZE] ____cacheline_aligned;
 };
 
 /* The following initializer overrides a method to NULL whether one of
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index ec54785..6593667 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1079,6 +1079,7 @@
 extern int 		register_netdevice_notifier(struct notifier_block *nb);
 extern int		unregister_netdevice_notifier(struct notifier_block *nb);
 extern int		init_dummy_netdev(struct net_device *dev);
+extern void		netdev_resync_ops(struct net_device *dev);
 
 extern int call_netdevice_notifiers(unsigned long val, struct net_device *dev);
 extern struct net_device	*dev_get_by_index(struct net *net, int ifindex);
diff --git a/include/linux/serio.h b/include/linux/serio.h
index 1bcb357..e0417e4 100644
--- a/include/linux/serio.h
+++ b/include/linux/serio.h
@@ -212,7 +212,7 @@
 #define SERIO_FUJITSU	0x35
 #define SERIO_ZHENHUA	0x36
 #define SERIO_INEXIO	0x37
-#define SERIO_TOUCHIT213	0x37
+#define SERIO_TOUCHIT213	0x38
 #define SERIO_W8001	0x39
 
 #endif
diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h
index 6fc13d9..ded434b 100644
--- a/include/net/net_namespace.h
+++ b/include/net/net_namespace.h
@@ -109,11 +109,6 @@
 #ifdef CONFIG_NET_NS
 extern void __put_net(struct net *net);
 
-static inline int net_alive(struct net *net)
-{
-	return net && atomic_read(&net->count);
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	atomic_inc(&net->count);
@@ -145,11 +140,6 @@
 }
 #else
 
-static inline int net_alive(struct net *net)
-{
-	return 1;
-}
-
 static inline struct net *get_net(struct net *net)
 {
 	return net;
@@ -234,6 +224,23 @@
 	void (*exit)(struct net *net);
 };
 
+/*
+ * Use these carefully.  If you implement a network device and it
+ * needs per network namespace operations use device pernet operations,
+ * otherwise use pernet subsys operations.
+ *
+ * This is critically important.  Most of the network code cleanup
+ * runs with the assumption that dev_remove_pack has been called so no
+ * new packets will arrive during and after the cleanup functions have
+ * been called.  dev_remove_pack is not per namespace so instead the
+ * guarantee of no more packets arriving in a network namespace is
+ * provided by ensuring that all network devices and all sockets have
+ * left the network namespace before the cleanup methods are called.
+ *
+ * For the longest time the ipv4 icmp code was registered as a pernet
+ * device which caused kernel oops, and panics during network
+ * namespace cleanup.   So please don't get this wrong.
+ */
 extern int register_pernet_subsys(struct pernet_operations *);
 extern void unregister_pernet_subsys(struct pernet_operations *);
 extern int register_pernet_gen_subsys(int *id, struct pernet_operations *);
diff --git a/init/Kconfig b/init/Kconfig
index f068071..6a5c5fe 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -675,6 +675,9 @@
 config SYSCTL
 	bool
 
+config ANON_INODES
+	bool
+
 menuconfig EMBEDDED
 	bool "Configure standard kernel features (for small systems)"
 	help
@@ -780,18 +783,6 @@
           This option allows to disable the internal PC-Speaker
           support, saving some memory.
 
-config COMPAT_BRK
-	bool "Disable heap randomization"
-	default y
-	help
-	  Randomizing heap placement makes heap exploits harder, but it
-	  also breaks ancient binaries (including anything libc5 based).
-	  This option changes the bootup default to heap randomization
-	  disabled, and can be overriden runtime by setting
-	  /proc/sys/kernel/randomize_va_space to 2.
-
-	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
-
 config BASE_FULL
 	default y
 	bool "Enable full-sized data structures for core" if EMBEDDED
@@ -809,9 +800,6 @@
 	  support for "fast userspace mutexes".  The resulting kernel may not
 	  run glibc-based applications correctly.
 
-config ANON_INODES
-	bool
-
 config EPOLL
 	bool "Enable eventpoll support" if EMBEDDED
 	default y
@@ -897,6 +885,18 @@
 	  SLUB sysfs support. /sys/slab will not exist and there will be
 	  no support for cache validation etc.
 
+config COMPAT_BRK
+	bool "Disable heap randomization"
+	default y
+	help
+	  Randomizing heap placement makes heap exploits harder, but it
+	  also breaks ancient binaries (including anything libc5 based).
+	  This option changes the bootup default to heap randomization
+	  disabled, and can be overriden runtime by setting
+	  /proc/sys/kernel/randomize_va_space to 2.
+
+	  On non-ancient distros (post-2000 ones) N is usually a safe choice.
+
 choice
 	prompt "Choose SLAB allocator"
 	default SLUB
diff --git a/kernel/fork.c b/kernel/fork.c
index a66fbde..4854c2c 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1179,10 +1179,6 @@
 #endif
 	clear_all_latency_tracing(p);
 
-	/* Our parent execution domain becomes current domain
-	   These must match for thread signalling to apply */
-	p->parent_exec_id = p->self_exec_id;
-
 	/* ok, now we should be set up.. */
 	p->exit_signal = (clone_flags & CLONE_THREAD) ? -1 : (clone_flags & CSIGNAL);
 	p->pdeath_signal = 0;
@@ -1220,10 +1216,13 @@
 		set_task_cpu(p, smp_processor_id());
 
 	/* CLONE_PARENT re-uses the old parent */
-	if (clone_flags & (CLONE_PARENT|CLONE_THREAD))
+	if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) {
 		p->real_parent = current->real_parent;
-	else
+		p->parent_exec_id = current->parent_exec_id;
+	} else {
 		p->real_parent = current;
+		p->parent_exec_id = current->self_exec_id;
+	}
 
 	spin_lock(&current->sighand->siglock);
 
diff --git a/kernel/softirq.c b/kernel/softirq.c
index bdbe9de..9041ea7 100644
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -626,6 +626,7 @@
 			preempt_enable_no_resched();
 			cond_resched();
 			preempt_disable();
+			rcu_qsctr_inc((long)__bind_cpu);
 		}
 		preempt_enable();
 		set_current_state(TASK_INTERRUPTIBLE);
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 43f891b..00d59d0 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -122,8 +122,10 @@
 	if (likely(tsk->mm)) {
 		cputime_t time, dtime;
 		struct timeval value;
+		unsigned long flags;
 		u64 delta;
 
+		local_irq_save(flags);
 		time = tsk->stime + tsk->utime;
 		dtime = cputime_sub(time, tsk->acct_timexpd);
 		jiffies_to_timeval(cputime_to_jiffies(dtime), &value);
@@ -131,10 +133,12 @@
 		delta = delta * USEC_PER_SEC + value.tv_usec;
 
 		if (delta == 0)
-			return;
+			goto out;
 		tsk->acct_timexpd = time;
 		tsk->acct_rss_mem1 += delta * get_mm_rss(tsk->mm);
 		tsk->acct_vm_mem1 += delta * tsk->mm->total_vm;
+	out:
+		local_irq_restore(flags);
 	}
 }
 
diff --git a/kernel/user.c b/kernel/user.c
index 6a9b696..fbb300e 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -286,14 +286,12 @@
 /* work function to remove sysfs directory for a user and free up
  * corresponding structures.
  */
-static void remove_user_sysfs_dir(struct work_struct *w)
+static void cleanup_user_struct(struct work_struct *w)
 {
 	struct user_struct *up = container_of(w, struct user_struct, work);
 	unsigned long flags;
 	int remove_user = 0;
 
-	if (up->user_ns != &init_user_ns)
-		return;
 	/* Make uid_hash_remove() + sysfs_remove_file() + kobject_del()
 	 * atomic.
 	 */
@@ -312,9 +310,11 @@
 	if (!remove_user)
 		goto done;
 
-	kobject_uevent(&up->kobj, KOBJ_REMOVE);
-	kobject_del(&up->kobj);
-	kobject_put(&up->kobj);
+	if (up->user_ns == &init_user_ns) {
+		kobject_uevent(&up->kobj, KOBJ_REMOVE);
+		kobject_del(&up->kobj);
+		kobject_put(&up->kobj);
+	}
 
 	sched_destroy_user(up);
 	key_put(up->uid_keyring);
@@ -335,7 +335,7 @@
 	atomic_inc(&up->__count);
 	spin_unlock_irqrestore(&uidhash_lock, flags);
 
-	INIT_WORK(&up->work, remove_user_sysfs_dir);
+	INIT_WORK(&up->work, cleanup_user_struct);
 	schedule_work(&up->work);
 }
 
diff --git a/lib/idr.c b/lib/idr.c
index c11c576..dab4bca 100644
--- a/lib/idr.c
+++ b/lib/idr.c
@@ -449,6 +449,7 @@
 
 	n = idp->layers * IDR_BITS;
 	p = idp->top;
+	rcu_assign_pointer(idp->top, NULL);
 	max = 1 << n;
 
 	id = 0;
@@ -467,7 +468,6 @@
 			p = *--paa;
 		}
 	}
-	rcu_assign_pointer(idp->top, NULL);
 	idp->layers = 0;
 }
 EXPORT_SYMBOL(idr_remove_all);
diff --git a/net/802/tr.c b/net/802/tr.c
index 158150f..f47ae28 100644
--- a/net/802/tr.c
+++ b/net/802/tr.c
@@ -668,3 +668,5 @@
 
 EXPORT_SYMBOL(tr_type_trans);
 EXPORT_SYMBOL(alloc_trdev);
+
+MODULE_LICENSE("GPL");
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index 4a19acd..1b34135 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -553,7 +553,7 @@
 	int err = 0;
 
 	if (netif_device_present(real_dev) && ops->ndo_neigh_setup)
-		err = ops->ndo_neigh_setup(dev, pa);
+		err = ops->ndo_neigh_setup(real_dev, pa);
 
 	return err;
 }
@@ -639,6 +639,7 @@
 		dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
 		dev->netdev_ops         = &vlan_netdev_ops;
 	}
+	netdev_resync_ops(dev);
 
 	if (is_vlan_dev(real_dev))
 		subclass = 1;
diff --git a/net/core/dev.c b/net/core/dev.c
index 72b0d26f..f112970 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -2267,12 +2267,6 @@
 
 	rcu_read_lock();
 
-	/* Don't receive packets in an exiting network namespace */
-	if (!net_alive(dev_net(skb->dev))) {
-		kfree_skb(skb);
-		goto out;
-	}
-
 #ifdef CONFIG_NET_CLS_ACT
 	if (skb->tc_verd & TC_NCLS) {
 		skb->tc_verd = CLR_TC_NCLS(skb->tc_verd);
@@ -4288,6 +4282,39 @@
 }
 EXPORT_SYMBOL(netdev_fix_features);
 
+/* Some devices need to (re-)set their netdev_ops inside
+ * ->init() or similar.  If that happens, we have to setup
+ * the compat pointers again.
+ */
+void netdev_resync_ops(struct net_device *dev)
+{
+#ifdef CONFIG_COMPAT_NET_DEV_OPS
+	const struct net_device_ops *ops = dev->netdev_ops;
+
+	dev->init = ops->ndo_init;
+	dev->uninit = ops->ndo_uninit;
+	dev->open = ops->ndo_open;
+	dev->change_rx_flags = ops->ndo_change_rx_flags;
+	dev->set_rx_mode = ops->ndo_set_rx_mode;
+	dev->set_multicast_list = ops->ndo_set_multicast_list;
+	dev->set_mac_address = ops->ndo_set_mac_address;
+	dev->validate_addr = ops->ndo_validate_addr;
+	dev->do_ioctl = ops->ndo_do_ioctl;
+	dev->set_config = ops->ndo_set_config;
+	dev->change_mtu = ops->ndo_change_mtu;
+	dev->neigh_setup = ops->ndo_neigh_setup;
+	dev->tx_timeout = ops->ndo_tx_timeout;
+	dev->get_stats = ops->ndo_get_stats;
+	dev->vlan_rx_register = ops->ndo_vlan_rx_register;
+	dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
+	dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = ops->ndo_poll_controller;
+#endif
+#endif
+}
+EXPORT_SYMBOL(netdev_resync_ops);
+
 /**
  *	register_netdevice	- register a network device
  *	@dev: device to register
@@ -4332,27 +4359,7 @@
 	 * This is temporary until all network devices are converted.
 	 */
 	if (dev->netdev_ops) {
-		const struct net_device_ops *ops = dev->netdev_ops;
-
-		dev->init = ops->ndo_init;
-		dev->uninit = ops->ndo_uninit;
-		dev->open = ops->ndo_open;
-		dev->change_rx_flags = ops->ndo_change_rx_flags;
-		dev->set_rx_mode = ops->ndo_set_rx_mode;
-		dev->set_multicast_list = ops->ndo_set_multicast_list;
-		dev->set_mac_address = ops->ndo_set_mac_address;
-		dev->validate_addr = ops->ndo_validate_addr;
-		dev->do_ioctl = ops->ndo_do_ioctl;
-		dev->set_config = ops->ndo_set_config;
-		dev->change_mtu = ops->ndo_change_mtu;
-		dev->tx_timeout = ops->ndo_tx_timeout;
-		dev->get_stats = ops->ndo_get_stats;
-		dev->vlan_rx_register = ops->ndo_vlan_rx_register;
-		dev->vlan_rx_add_vid = ops->ndo_vlan_rx_add_vid;
-		dev->vlan_rx_kill_vid = ops->ndo_vlan_rx_kill_vid;
-#ifdef CONFIG_NET_POLL_CONTROLLER
-		dev->poll_controller = ops->ndo_poll_controller;
-#endif
+		netdev_resync_ops(dev);
 	} else {
 		char drivername[64];
 		pr_info("%s (%s): not using net_device_ops yet\n",
diff --git a/net/core/net-sysfs.c b/net/core/net-sysfs.c
index 6ac29a4..484f587 100644
--- a/net/core/net-sysfs.c
+++ b/net/core/net-sysfs.c
@@ -77,7 +77,9 @@
 	if (endp == buf)
 		goto err;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
+
 	if (dev_isalive(net)) {
 		if ((ret = (*set)(net, new)) == 0)
 			ret = len;
diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c
index 2adb1a7..e3bebd3 100644
--- a/net/core/net_namespace.c
+++ b/net/core/net_namespace.c
@@ -157,9 +157,6 @@
 	struct pernet_operations *ops;
 	struct net *net;
 
-	/* Be very certain incoming network packets will not find us */
-	rcu_barrier();
-
 	net = container_of(work, struct net, work);
 
 	mutex_lock(&net_mutex);
diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c
index 705b33b..fc562d2 100644
--- a/net/ipv4/icmp.c
+++ b/net/ipv4/icmp.c
@@ -1205,7 +1205,7 @@
 
 int __init icmp_init(void)
 {
-	return register_pernet_device(&icmp_sk_ops);
+	return register_pernet_subsys(&icmp_sk_ops);
 }
 
 EXPORT_SYMBOL(icmp_err_convert);
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 19d7b42..cf74c41 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -2443,7 +2443,7 @@
 void __init tcp_v4_init(void)
 {
 	inet_hashinfo_init(&tcp_hashinfo);
-	if (register_pernet_device(&tcp_sk_ops))
+	if (register_pernet_subsys(&tcp_sk_ops))
 		panic("Failed to create the TCP control socket.\n");
 }
 
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f9afb45..1220e2c 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -493,15 +493,17 @@
 	read_unlock(&dev_base_lock);
 }
 
-static void addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
+static int addrconf_fixup_forwarding(struct ctl_table *table, int *p, int old)
 {
 	struct net *net;
 
 	net = (struct net *)table->extra2;
 	if (p == &net->ipv6.devconf_dflt->forwarding)
-		return;
+		return 0;
 
-	rtnl_lock();
+	if (!rtnl_trylock())
+		return -ERESTARTSYS;
+
 	if (p == &net->ipv6.devconf_all->forwarding) {
 		__s32 newf = net->ipv6.devconf_all->forwarding;
 		net->ipv6.devconf_dflt->forwarding = newf;
@@ -512,6 +514,7 @@
 
 	if (*p)
 		rt6_purge_dflt_routers(net);
+	return 1;
 }
 #endif
 
@@ -2608,9 +2611,6 @@
 
 	ASSERT_RTNL();
 
-	if ((dev->flags & IFF_LOOPBACK) && how == 1)
-		how = 0;
-
 	rt6_ifdown(net, dev);
 	neigh_ifdown(&nd_tbl, dev);
 
@@ -3983,7 +3983,7 @@
 	ret = proc_dointvec(ctl, write, filp, buffer, lenp, ppos);
 
 	if (write)
-		addrconf_fixup_forwarding(ctl, valp, val);
+		ret = addrconf_fixup_forwarding(ctl, valp, val);
 	return ret;
 }
 
@@ -4019,8 +4019,7 @@
 	}
 
 	*valp = new;
-	addrconf_fixup_forwarding(table, valp, val);
-	return 1;
+	return addrconf_fixup_forwarding(table, valp, val);
 }
 
 static struct addrconf_sysctl_table
@@ -4446,25 +4445,6 @@
 
 EXPORT_SYMBOL(unregister_inet6addr_notifier);
 
-static void addrconf_net_exit(struct net *net)
-{
-	struct net_device *dev;
-
-	rtnl_lock();
-	/* clean dev list */
-	for_each_netdev(net, dev) {
-		if (__in6_dev_get(dev) == NULL)
-			continue;
-		addrconf_ifdown(dev, 1);
-	}
-	addrconf_ifdown(net->loopback_dev, 2);
-	rtnl_unlock();
-}
-
-static struct pernet_operations addrconf_net_ops = {
-	.exit = addrconf_net_exit,
-};
-
 /*
  *	Init / cleanup code
  */
@@ -4506,10 +4486,6 @@
 	if (err)
 		goto errlo;
 
-	err = register_pernet_device(&addrconf_net_ops);
-	if (err)
-		return err;
-
 	register_netdevice_notifier(&ipv6_dev_notf);
 
 	addrconf_verify(0);
@@ -4539,15 +4515,22 @@
 void addrconf_cleanup(void)
 {
 	struct inet6_ifaddr *ifa;
+	struct net_device *dev;
 	int i;
 
 	unregister_netdevice_notifier(&ipv6_dev_notf);
-	unregister_pernet_device(&addrconf_net_ops);
-
 	unregister_pernet_subsys(&addrconf_ops);
 
 	rtnl_lock();
 
+	/* clean dev list */
+	for_each_netdev(&init_net, dev) {
+		if (__in6_dev_get(dev) == NULL)
+			continue;
+		addrconf_ifdown(dev, 1);
+	}
+	addrconf_ifdown(init_net.loopback_dev, 2);
+
 	/*
 	 *	Check hash table.
 	 */
@@ -4568,6 +4551,4 @@
 
 	del_timer(&addr_chk_timer);
 	rtnl_unlock();
-
-	unregister_pernet_subsys(&addrconf_net_ops);
 }
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index c802bc1..da944ec 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -72,6 +72,10 @@
 static struct list_head inetsw6[SOCK_MAX];
 static DEFINE_SPINLOCK(inetsw6_lock);
 
+static int disable_ipv6 = 0;
+module_param_named(disable, disable_ipv6, int, 0);
+MODULE_PARM_DESC(disable, "Disable IPv6 such that it is non-functional");
+
 static __inline__ struct ipv6_pinfo *inet6_sk_generic(struct sock *sk)
 {
 	const int offset = sk->sk_prot->obj_size - sizeof(struct ipv6_pinfo);
@@ -991,10 +995,21 @@
 {
 	struct sk_buff *dummy_skb;
 	struct list_head *r;
-	int err;
+	int err = 0;
 
 	BUILD_BUG_ON(sizeof(struct inet6_skb_parm) > sizeof(dummy_skb->cb));
 
+	/* Register the socket-side information for inet6_create.  */
+	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
+		INIT_LIST_HEAD(r);
+
+	if (disable_ipv6) {
+		printk(KERN_INFO
+		       "IPv6: Loaded, but administratively disabled, "
+		       "reboot required to enable\n");
+		goto out;
+	}
+
 	err = proto_register(&tcpv6_prot, 1);
 	if (err)
 		goto out;
@@ -1012,10 +1027,6 @@
 		goto out_unregister_udplite_proto;
 
 
-	/* Register the socket-side information for inet6_create.  */
-	for(r = &inetsw6[0]; r < &inetsw6[SOCK_MAX]; ++r)
-		INIT_LIST_HEAD(r);
-
 	/* We MUST register RAW sockets before we create the ICMP6,
 	 * IGMP6, or NDISC control sockets.
 	 */
diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c
index 9eb895c..3ae3cb8 100644
--- a/net/netlink/af_netlink.c
+++ b/net/netlink/af_netlink.c
@@ -1084,6 +1084,13 @@
 	return 0;
 }
 
+/**
+ * netlink_set_err - report error to broadcast listeners
+ * @ssk: the kernel netlink socket, as returned by netlink_kernel_create()
+ * @pid: the PID of a process that we want to skip (if any)
+ * @groups: the broadcast group that will notice the error
+ * @code: error code, must be negative (as usual in kernelspace)
+ */
 void netlink_set_err(struct sock *ssk, u32 pid, u32 group, int code)
 {
 	struct netlink_set_err_data info;
@@ -1093,7 +1100,8 @@
 	info.exclude_sk = ssk;
 	info.pid = pid;
 	info.group = group;
-	info.code = code;
+	/* sk->sk_err wants a positive error value */
+	info.code = -code;
 
 	read_lock(&nl_table_lock);
 
diff --git a/net/sched/act_police.c b/net/sched/act_police.c
index 5c72a11..f8f047b6 100644
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -183,13 +183,6 @@
 		if (R_tab == NULL)
 			goto failure;
 
-		if (!est && (ret == ACT_P_CREATED ||
-			     !gen_estimator_active(&police->tcf_bstats,
-						   &police->tcf_rate_est))) {
-			err = -EINVAL;
-			goto failure;
-		}
-
 		if (parm->peakrate.rate) {
 			P_tab = qdisc_get_rtab(&parm->peakrate,
 					       tb[TCA_POLICE_PEAKRATE]);
@@ -205,6 +198,12 @@
 					    &police->tcf_lock, est);
 		if (err)
 			goto failure_unlock;
+	} else if (tb[TCA_POLICE_AVRATE] &&
+		   (ret == ACT_P_CREATED ||
+		    !gen_estimator_active(&police->tcf_bstats,
+					  &police->tcf_rate_est))) {
+		err = -EINVAL;
+		goto failure_unlock;
 	}
 
 	/* No failure allowed after this point */
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index b78e3be..c4986d0 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -717,15 +717,20 @@
 static int sctp_ctl_sock_init(void)
 {
 	int err;
-	sa_family_t family;
+	sa_family_t family = PF_INET;
 
 	if (sctp_get_pf_specific(PF_INET6))
 		family = PF_INET6;
-	else
-		family = PF_INET;
 
 	err = inet_ctl_sock_create(&sctp_ctl_sock, family,
 				   SOCK_SEQPACKET, IPPROTO_SCTP, &init_net);
+
+	/* If IPv6 socket could not be created, try the IPv4 socket */
+	if (err < 0 && family == PF_INET6)
+		err = inet_ctl_sock_create(&sctp_ctl_sock, AF_INET,
+					   SOCK_SEQPACKET, IPPROTO_SCTP,
+					   &init_net);
+
 	if (err < 0) {
 		printk(KERN_ERR
 		       "SCTP: Failed to create the SCTP control socket.\n");
@@ -1322,9 +1327,8 @@
 out:
 	return status;
 err_v6_add_protocol:
-	sctp_v6_del_protocol();
-err_add_protocol:
 	sctp_v4_del_protocol();
+err_add_protocol:
 	inet_ctl_sock_destroy(sctp_ctl_sock);
 err_ctl_sock_init:
 	sctp_v6_protosw_exit();
@@ -1335,7 +1339,6 @@
 	sctp_v4_pf_exit();
 	sctp_v6_pf_exit();
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 	free_pages((unsigned long)sctp_port_hashtable,
 		   get_order(sctp_port_hashsize *
 			     sizeof(struct sctp_bind_hashbucket)));
@@ -1383,7 +1386,6 @@
 	sctp_v4_pf_exit();
 
 	sctp_sysctl_unregister();
-	list_del(&sctp_af_inet.list);
 
 	free_pages((unsigned long)sctp_assoc_hashtable,
 		   get_order(sctp_assoc_hashsize *
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index e1d6076..b5495ae 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -787,36 +787,48 @@
 				   struct sctp_association *asoc,
 				   struct sctp_chunk *chunk)
 {
-	struct sctp_operr_chunk *operr_chunk;
 	struct sctp_errhdr *err_hdr;
+	struct sctp_ulpevent *ev;
 
-	operr_chunk = (struct sctp_operr_chunk *)chunk->chunk_hdr;
-	err_hdr = &operr_chunk->err_hdr;
+	while (chunk->chunk_end > chunk->skb->data) {
+		err_hdr = (struct sctp_errhdr *)(chunk->skb->data);
 
-	switch (err_hdr->cause) {
-	case SCTP_ERROR_UNKNOWN_CHUNK:
-	{
-		struct sctp_chunkhdr *unk_chunk_hdr;
+		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
+						     GFP_ATOMIC);
+		if (!ev)
+			return;
 
-		unk_chunk_hdr = (struct sctp_chunkhdr *)err_hdr->variable;
-		switch (unk_chunk_hdr->type) {
-		/* ADDIP 4.1 A9) If the peer responds to an ASCONF with an
-		 * ERROR chunk reporting that it did not recognized the ASCONF
-		 * chunk type, the sender of the ASCONF MUST NOT send any
-		 * further ASCONF chunks and MUST stop its T-4 timer.
-		 */
-		case SCTP_CID_ASCONF:
-			asoc->peer.asconf_capable = 0;
-			sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
+		sctp_ulpq_tail_event(&asoc->ulpq, ev);
+
+		switch (err_hdr->cause) {
+		case SCTP_ERROR_UNKNOWN_CHUNK:
+		{
+			sctp_chunkhdr_t *unk_chunk_hdr;
+
+			unk_chunk_hdr = (sctp_chunkhdr_t *)err_hdr->variable;
+			switch (unk_chunk_hdr->type) {
+			/* ADDIP 4.1 A9) If the peer responds to an ASCONF with
+			 * an ERROR chunk reporting that it did not recognized
+			 * the ASCONF chunk type, the sender of the ASCONF MUST
+			 * NOT send any further ASCONF chunks and MUST stop its
+			 * T-4 timer.
+			 */
+			case SCTP_CID_ASCONF:
+				if (asoc->peer.asconf_capable == 0)
+					break;
+
+				asoc->peer.asconf_capable = 0;
+				sctp_add_cmd_sf(cmds, SCTP_CMD_TIMER_STOP,
 					SCTP_TO(SCTP_EVENT_TIMEOUT_T4_RTO));
+				break;
+			default:
+				break;
+			}
 			break;
+		}
 		default:
 			break;
 		}
-		break;
-	}
-	default:
-		break;
 	}
 }
 
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 3a0cd07..f88dfde 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -3163,7 +3163,6 @@
 					sctp_cmd_seq_t *commands)
 {
 	struct sctp_chunk *chunk = arg;
-	struct sctp_ulpevent *ev;
 
 	if (!sctp_vtag_verify(chunk, asoc))
 		return sctp_sf_pdiscard(ep, asoc, type, arg, commands);
@@ -3173,21 +3172,10 @@
 		return sctp_sf_violation_chunklen(ep, asoc, type, arg,
 						  commands);
 
-	while (chunk->chunk_end > chunk->skb->data) {
-		ev = sctp_ulpevent_make_remote_error(asoc, chunk, 0,
-						     GFP_ATOMIC);
-		if (!ev)
-			goto nomem;
+	sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
+			SCTP_CHUNK(chunk));
 
-		sctp_add_cmd_sf(commands, SCTP_CMD_EVENT_ULP,
-				SCTP_ULPEVENT(ev));
-		sctp_add_cmd_sf(commands, SCTP_CMD_PROCESS_OPERR,
-				SCTP_CHUNK(chunk));
-	}
 	return SCTP_DISPOSITION_CONSUME;
-
-nomem:
-	return SCTP_DISPOSITION_NOMEM;
 }
 
 /*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 85c9034..bd0a16c 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -380,7 +380,8 @@
 
 	freq_diff = freq_range->end_freq_khz - freq_range->start_freq_khz;
 
-	if (freq_diff <= 0 || freq_range->max_bandwidth_khz > freq_diff)
+	if (freq_range->end_freq_khz <= freq_range->start_freq_khz ||
+			freq_range->max_bandwidth_khz > freq_diff)
 		return false;
 
 	return true;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index 0278bc0..e7ded13 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1498,58 +1498,31 @@
  * looks for host based access restrictions
  *
  * This version will only be appropriate for really small
- * sets of single label hosts. Because of the masking
- * it cannot shortcut out on the first match. There are
- * numerious ways to address the problem, but none of them
- * have been applied here.
+ * sets of single label hosts.
  *
  * Returns the label of the far end or NULL if it's not special.
  */
 static char *smack_host_label(struct sockaddr_in *sip)
 {
 	struct smk_netlbladdr *snp;
-	char *bestlabel = NULL;
 	struct in_addr *siap = &sip->sin_addr;
-	struct in_addr *liap;
-	struct in_addr *miap;
-	struct in_addr bestmask;
 
 	if (siap->s_addr == 0)
 		return NULL;
 
-	bestmask.s_addr = 0;
-
 	for (snp = smack_netlbladdrs; snp != NULL; snp = snp->smk_next) {
-		liap = &snp->smk_host.sin_addr;
-		miap = &snp->smk_mask;
 		/*
-		 * If the addresses match after applying the list entry mask
-		 * the entry matches the address. If it doesn't move along to
-		 * the next entry.
+		 * we break after finding the first match because
+		 * the list is sorted from longest to shortest mask
+		 * so we have found the most specific match
 		 */
-		if ((liap->s_addr & miap->s_addr) !=
-		    (siap->s_addr & miap->s_addr))
-			continue;
-		/*
-		 * If the list entry mask identifies a single address
-		 * it can't get any more specific.
-		 */
-		if (miap->s_addr == 0xffffffff)
+		if ((&snp->smk_host.sin_addr)->s_addr  ==
+			(siap->s_addr & (&snp->smk_mask)->s_addr)) {
 			return snp->smk_label;
-		/*
-		 * If the list entry mask is less specific than the best
-		 * already found this entry is uninteresting.
-		 */
-		if ((miap->s_addr | bestmask.s_addr) == bestmask.s_addr)
-			continue;
-		/*
-		 * This is better than any entry found so far.
-		 */
-		bestmask.s_addr = miap->s_addr;
-		bestlabel = snp->smk_label;
+		}
 	}
 
-	return bestlabel;
+	return NULL;
 }
 
 /**
diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c
index 8e42800..51f0efc 100644
--- a/security/smack/smackfs.c
+++ b/security/smack/smackfs.c
@@ -650,10 +650,6 @@
 
 	return skp;
 }
-/*
-#define BEMASK	0x80000000
-*/
-#define BEMASK	0x00000001
 #define BEBITS	(sizeof(__be32) * 8)
 
 /*
@@ -663,12 +659,10 @@
 {
 	struct smk_netlbladdr *skp = (struct smk_netlbladdr *) v;
 	unsigned char *hp = (char *) &skp->smk_host.sin_addr.s_addr;
-	__be32 bebits;
-	int maskn = 0;
+	int maskn;
+	u32 temp_mask = be32_to_cpu(skp->smk_mask.s_addr);
 
-	for (bebits = BEMASK; bebits != 0; maskn++, bebits <<= 1)
-		if ((skp->smk_mask.s_addr & bebits) == 0)
-			break;
+	for (maskn = 0; temp_mask; temp_mask <<= 1, maskn++);
 
 	seq_printf(s, "%u.%u.%u.%u/%d %s\n",
 		hp[0], hp[1], hp[2], hp[3], maskn, skp->smk_label);
@@ -702,6 +696,42 @@
 }
 
 /**
+ * smk_netlbladdr_insert
+ * @new : netlabel to insert
+ *
+ * This helper insert netlabel in the smack_netlbladdrs list
+ * sorted by netmask length (longest to smallest)
+ */
+static void smk_netlbladdr_insert(struct smk_netlbladdr *new)
+{
+	struct smk_netlbladdr *m;
+
+	if (smack_netlbladdrs == NULL) {
+		smack_netlbladdrs = new;
+		return;
+	}
+
+	/* the comparison '>' is a bit hacky, but works */
+	if (new->smk_mask.s_addr > smack_netlbladdrs->smk_mask.s_addr) {
+		new->smk_next = smack_netlbladdrs;
+		smack_netlbladdrs = new;
+		return;
+	}
+	for (m = smack_netlbladdrs; m != NULL; m = m->smk_next) {
+		if (m->smk_next == NULL) {
+			m->smk_next = new;
+			return;
+		}
+		if (new->smk_mask.s_addr > m->smk_next->smk_mask.s_addr) {
+			new->smk_next = m->smk_next;
+			m->smk_next = new;
+			return;
+		}
+	}
+}
+
+
+/**
  * smk_write_netlbladdr - write() for /smack/netlabel
  * @filp: file pointer, not actually used
  * @buf: where to get the data from
@@ -724,8 +754,9 @@
 	struct netlbl_audit audit_info;
 	struct in_addr mask;
 	unsigned int m;
-	__be32 bebits = BEMASK;
+	u32 mask_bits = (1<<31);
 	__be32 nsa;
+	u32 temp_mask;
 
 	/*
 	 * Must have privilege.
@@ -761,10 +792,13 @@
 	if (sp == NULL)
 		return -EINVAL;
 
-	for (mask.s_addr = 0; m > 0; m--) {
-		mask.s_addr |= bebits;
-		bebits <<= 1;
+	for (temp_mask = 0; m > 0; m--) {
+		temp_mask |= mask_bits;
+		mask_bits >>= 1;
 	}
+	mask.s_addr = cpu_to_be32(temp_mask);
+
+	newname.sin_addr.s_addr &= mask.s_addr;
 	/*
 	 * Only allow one writer at a time. Writes should be
 	 * quite rare and small in any case.
@@ -772,6 +806,7 @@
 	mutex_lock(&smk_netlbladdr_lock);
 
 	nsa = newname.sin_addr.s_addr;
+	/* try to find if the prefix is already in the list */
 	for (skp = smack_netlbladdrs; skp != NULL; skp = skp->smk_next)
 		if (skp->smk_host.sin_addr.s_addr == nsa &&
 		    skp->smk_mask.s_addr == mask.s_addr)
@@ -787,9 +822,8 @@
 			rc = 0;
 			skp->smk_host.sin_addr.s_addr = newname.sin_addr.s_addr;
 			skp->smk_mask.s_addr = mask.s_addr;
-			skp->smk_next = smack_netlbladdrs;
 			skp->smk_label = sp;
-			smack_netlbladdrs = skp;
+			smk_netlbladdr_insert(skp);
 		}
 	} else {
 		rc = netlbl_cfg_unlbl_static_del(&init_net, NULL,
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 3bc4276..6094344 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1207,7 +1207,7 @@
 	"LFE Playback Volume",
 	"Side Playback Volume",
 	"Headphone Playback Volume",
-	"Headphone Playback Volume",
+	"Headphone2 Playback Volume",
 	"Speaker Playback Volume",
 	"External Speaker Playback Volume",
 	"Speaker2 Playback Volume",
@@ -1221,7 +1221,7 @@
 	"LFE Playback Switch",
 	"Side Playback Switch",
 	"Headphone Playback Switch",
-	"Headphone Playback Switch",
+	"Headphone2 Playback Switch",
 	"Speaker Playback Switch",
 	"External Speaker Playback Switch",
 	"Speaker2 Playback Switch",
@@ -3516,6 +3516,7 @@
 	if (! spec->autocfg.line_outs)
 		return 0; /* can't find valid pin config */
 
+#if 0 /* FIXME: temporarily disabled */
 	/* If we have no real line-out pin and multiple hp-outs, HPs should
 	 * be set up as multi-channel outputs.
 	 */
@@ -3535,6 +3536,7 @@
 		spec->autocfg.line_out_type = AUTO_PIN_HP_OUT;
 		spec->autocfg.hp_outs = 0;
 	}
+#endif /* FIXME: temporarily disabled */
 	if (spec->autocfg.mono_out_pin) {
 		int dir = get_wcaps(codec, spec->autocfg.mono_out_pin) &
 			(AC_WCAP_OUT_AMP | AC_WCAP_IN_AMP);