blob: 4642cdd83b1079c48fec47647e2b29cdd4fd1008 [file] [log] [blame]
<ARG>
<NAME>GstIirEqualizer10Bands::band0</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>29 Hz</NICK>
<BLURB>gain for the frequency band 29 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band1</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>59 Hz</NICK>
<BLURB>gain for the frequency band 59 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band2</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>119 Hz</NICK>
<BLURB>gain for the frequency band 119 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band3</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>237 Hz</NICK>
<BLURB>gain for the frequency band 237 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band4</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>474 Hz</NICK>
<BLURB>gain for the frequency band 474 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band5</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>947 Hz</NICK>
<BLURB>gain for the frequency band 947 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band6</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>1889 Hz</NICK>
<BLURB>gain for the frequency band 1889 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band7</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>3770 Hz</NICK>
<BLURB>gain for the frequency band 3770 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band8</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>7523 Hz</NICK>
<BLURB>gain for the frequency band 7523 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer10Bands::band9</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>15011 Hz</NICK>
<BLURB>gain for the frequency band 15011 Hz, ranging from -24 dB to +12 dB.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer3Bands::band0</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>110 Hz</NICK>
<BLURB>gain for the frequency band 100 Hz, ranging from -24.0 to +12.0.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer3Bands::band1</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>1100 Hz</NICK>
<BLURB>gain for the frequency band 1100 Hz, ranging from -24.0 to +12.0.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizer3Bands::band2</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-24,12]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>11 kHz</NICK>
<BLURB>gain for the frequency band 11 kHz, ranging from -24.0 to +12.0.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstIirEqualizerNBands::num-bands</NAME>
<TYPE>guint</TYPE>
<RANGE>[1,64]</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>num-bands</NICK>
<BLURB>number of different bands to use.</BLURB>
<DEFAULT>10</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>File Location</NICK>
<BLURB>Location of the file to write.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::index</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Index</NICK>
<BLURB>Index to use with location property to create file names. The index is incremented by one for each buffer written.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::next-file</NAME>
<TYPE>GstMultiFileSinkNext</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Next File</NICK>
<BLURB>When to start a new file.</BLURB>
<DEFAULT>New file for each buffer</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::post-messages</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Post Messages</NICK>
<BLURB>Post a message for each file with information of the buffer.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::max-files</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max files</NICK>
<BLURB>Maximum number of files to keep on disk. Once the maximum is reached,old files start to be deleted to make room for new ones.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::max-file-size</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Maximum File Size</NICK>
<BLURB>Maximum file size before starting a new file in max-size mode.</BLURB>
<DEFAULT>2147483648</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::aggregate-gops</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Aggregate GOPs</NICK>
<BLURB>Whether to aggregate GOPs and process them as a whole without splitting.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSink::max-file-duration</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Maximum File Duration</NICK>
<BLURB>Maximum file duration before starting a new file in max-size mode (in nanoseconds).</BLURB>
<DEFAULT>18446744073709551615</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::caps</NAME>
<TYPE>GstCaps*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Caps</NICK>
<BLURB>Caps describing the format of the data.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::index</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>File Index</NICK>
<BLURB>Index to use with location property to create file names. The index is incremented by one for each buffer read.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>File Location</NICK>
<BLURB>Pattern to create file names of input files. File names are created by calling sprintf() with the pattern and the current index.</BLURB>
<DEFAULT>"%05d"</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::loop</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Loop</NICK>
<BLURB>Whether to repeat from the beginning when all files have been read.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::start-index</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Start Index</NICK>
<BLURB>Start value of index. The initial value of index can be set either by setting index or start-index. When the end of the loop is reached, the index will be set to the value start-index.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiFileSrc::stop-index</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Stop Index</NICK>
<BLURB>Stop value of index. The special value -1 means no stop.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstOssSrc::device</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Device</NICK>
<BLURB>OSS device (usually /dev/dspN).</BLURB>
<DEFAULT>"/dev/dsp"</DEFAULT>
</ARG>
<ARG>
<NAME>GstOssSrc::device-name</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Device name</NICK>
<BLURB>Human-readable name of the sound device.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::bands</NAME>
<TYPE>guint</TYPE>
<RANGE>[2,1073741824]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bands</NICK>
<BLURB>Number of frequency bands.</BLURB>
<DEFAULT>128</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::interval</NAME>
<TYPE>guint64</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Interval</NICK>
<BLURB>Interval of time between message posts (in nanoseconds).</BLURB>
<DEFAULT>100000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::threshold</NAME>
<TYPE>gint</TYPE>
<RANGE><= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Threshold</NICK>
<BLURB>dB threshold for result. All lower values will be set to this.</BLURB>
<DEFAULT>-60</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::message-magnitude</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Magnitude</NICK>
<BLURB>Whether to add a 'magnitude' field to the structure of any 'spectrum' element messages posted on the bus.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::message-phase</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Phase</NICK>
<BLURB>Whether to add a 'phase' field to the structure of any 'spectrum' element messages posted on the bus.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::post-messages</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Post Messages</NICK>
<BLURB>Whether to post a 'spectrum' element message on the bus for each passed interval.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpectrum::multi-channel</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multichannel results</NICK>
<BLURB>Send separate results for each channel.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::alpha</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Alpha</NICK>
<BLURB>Alpha value picture.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::border-alpha</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Border Alpha</NICK>
<BLURB>Alpha value of the border.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::bottom</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bottom</NICK>
<BLURB>Pixels to box at bottom (<0 = add a border).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::fill</NAME>
<TYPE>GstVideoBoxFill</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Fill</NICK>
<BLURB>How to fill the borders.</BLURB>
<DEFAULT>Black</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::left</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Left</NICK>
<BLURB>Pixels to box at left (<0 = add a border).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::right</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Right</NICK>
<BLURB>Pixels to box at right (<0 = add a border).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::top</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Top</NICK>
<BLURB>Pixels to box at top (<0 = add a border).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBox::autocrop</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Auto crop</NICK>
<BLURB>Auto crop.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSink::host</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>host</NICK>
<BLURB>The host/IP/Multicast group to send the packets to.</BLURB>
<DEFAULT>"localhost"</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSink::port</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,65535]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>port</NICK>
<BLURB>The port to send the packets to.</BLURB>
<DEFAULT>5004</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::caps</NAME>
<TYPE>GstCaps*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Caps</NICK>
<BLURB>The caps of the source pad.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::multicast-group</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Group</NICK>
<BLURB>The Address of multicast group to join. (DEPRECATED: Use address property instead).</BLURB>
<DEFAULT>"0.0.0.0"</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::port</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,65535]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Port</NICK>
<BLURB>The port to receive the packets from, 0=allocate.</BLURB>
<DEFAULT>5004</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::uri</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>URI</NICK>
<BLURB>URI in the form of udp://multicast_group:port.</BLURB>
<DEFAULT>"udp://0.0.0.0:5004"</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::buffer-size</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffer Size</NICK>
<BLURB>Size of the kernel receive buffer in bytes, 0=default.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::timeout</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Timeout</NICK>
<BLURB>Post a message after timeout nanoseconds (0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::skip-first-bytes</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Skip first bytes</NICK>
<BLURB>number of bytes to skip for each udp packet.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::auto-multicast</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Auto Multicast</NICK>
<BLURB>Automatically join/leave multicast groups.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::multicast-iface</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Interface</NICK>
<BLURB>The network interface on which to join the multicast group.This allows multiple interfaces seperated by comma. ("eth0,eth1").</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::reuse</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Reuse</NICK>
<BLURB>Enable reuse of the port.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::close-socket</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Close socket</NICK>
<BLURB>Close socket if passed as property on state change.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::socket</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Socket</NICK>
<BLURB>Socket to use for UDP reception. (NULL == allocate).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::used-socket</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Socket Handle</NICK>
<BLURB>Socket currently in use for UDP reception. (NULL = no socket).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::address</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Address</NICK>
<BLURB>Address to receive packets for. This is equivalent to the multicast-group property for now.</BLURB>
<DEFAULT>"0.0.0.0"</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::loop</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Loopback</NICK>
<BLURB>Used for setting the multicast loop parameter. TRUE = enable, FALSE = disable.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstUDPSrc::retrieve-sender-address</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Retrieve Sender Address</NICK>
<BLURB>Whether to retrieve the sender address and add it to buffers as meta. Disabling this might result in minor performance improvements in certain scenarios.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSMPTE::border</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Border</NICK>
<BLURB>The border width of the transition.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstSMPTE::depth</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,24]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Depth</NICK>
<BLURB>Depth of the mask in bits.</BLURB>
<DEFAULT>16</DEFAULT>
</ARG>
<ARG>
<NAME>GstSMPTE::type</NAME>
<TYPE>GstSMPTETransitionType</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Type</NICK>
<BLURB>The type of transition to use.</BLURB>
<DEFAULT>A bar moves from left to right</DEFAULT>
</ARG>
<ARG>
<NAME>GstSMPTE::duration</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Duration</NICK>
<BLURB>Duration of the transition effect in nanoseconds.</BLURB>
<DEFAULT>1000000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstSMPTE::invert</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Invert</NICK>
<BLURB>Invert transition mask.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::debug</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Debug</NICK>
<BLURB>Dump request and response messages to stdout(DEPRECATED: Printed all RTSP message to gstreamer log as 'log' level).</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::location</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>RTSP Location</NICK>
<BLURB>Location of the RTSP url to read.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::protocols</NAME>
<TYPE>GstRTSPLowerTrans</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Protocols</NICK>
<BLURB>Allowed lower transport protocols.</BLURB>
<DEFAULT>GST_RTSP_LOWER_TRANS_UDP|GST_RTSP_LOWER_TRANS_UDP_MCAST|GST_RTSP_LOWER_TRANS_TCP</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::retry</NAME>
<TYPE>guint</TYPE>
<RANGE><= 65535</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Retry</NICK>
<BLURB>Max number of retries when allocating RTP ports.</BLURB>
<DEFAULT>20</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::timeout</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Timeout</NICK>
<BLURB>Retry TCP transport after UDP timeout microseconds (0 = disabled).</BLURB>
<DEFAULT>5000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::latency</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffer latency in ms</NICK>
<BLURB>Amount of ms to buffer.</BLURB>
<DEFAULT>2000</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::tcp-timeout</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>TCP Timeout</NICK>
<BLURB>Fail after timeout microseconds on TCP connections (0 = disabled).</BLURB>
<DEFAULT>20000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::connection-speed</NAME>
<TYPE>guint64</TYPE>
<RANGE><= 18446744073709551</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Connection Speed</NICK>
<BLURB>Network connection speed in kbps (0 = unknown).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::nat-method</NAME>
<TYPE>GstRTSPNatMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>NAT Method</NICK>
<BLURB>Method to use for traversing firewalls and NAT.</BLURB>
<DEFAULT>Send Dummy packets</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::do-rtcp</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Do RTCP</NICK>
<BLURB>Send RTCP packets, disable for old incompatible server.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::proxy</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Proxy</NICK>
<BLURB>Proxy settings for HTTP tunneling. Format: [http://][user:passwd@]host[:port].</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::rtp-blocksize</NAME>
<TYPE>guint</TYPE>
<RANGE><= 65536</RANGE>
<FLAGS>rw</FLAGS>
<NICK>RTP Blocksize</NICK>
<BLURB>RTP package size to suggest to server (0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::user-id</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>user-id</NICK>
<BLURB>RTSP location URI user id for authentication.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::user-pw</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>user-pw</NICK>
<BLURB>RTSP location URI user password for authentication.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::buffer-mode</NAME>
<TYPE>GstRTSPSrcBufferMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffer Mode</NICK>
<BLURB>Control the buffering algorithm in use.</BLURB>
<DEFAULT>Choose mode depending on stream live</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::port-range</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Port range</NICK>
<BLURB>Client port range that can be used to receive RTP and RTCP data, eg. 3000-3005 (NULL = no restrictions).</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::udp-buffer-size</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>UDP Buffer Size</NICK>
<BLURB>Size of the kernel UDP receive buffer in bytes, 0=default.</BLURB>
<DEFAULT>524288</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::short-header</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Short Header</NICK>
<BLURB>Only send the basic RTSP headers for broken encoders.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::do-rtsp-keep-alive</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Do RTSP Keep Alive</NICK>
<BLURB>Send RTSP keep alive packets, disable for old incompatible server.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::drop-on-latency</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop buffers when maximum latency is reached</NICK>
<BLURB>Tells the jitterbuffer to never exceed the given latency in size.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::probation</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Number of probations</NICK>
<BLURB>Consecutive packet sequence numbers to accept the source.</BLURB>
<DEFAULT>2</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::udp-reconnect</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Reconnect to the server</NICK>
<BLURB>Reconnect to the server if RTSP connection is closed when doing UDP.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::proxy-id</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>proxy-id</NICK>
<BLURB>HTTP proxy URI user id for authentication.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::proxy-pw</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>proxy-pw</NICK>
<BLURB>HTTP proxy URI user password for authentication.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::multicast-iface</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Interface</NICK>
<BLURB>The network interface on which to join the multicast group.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::ntp-sync</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync on NTP clock</NICK>
<BLURB>Synchronize received streams to the NTP clock.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::use-pipeline-clock</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use pipeline clock</NICK>
<BLURB>Use the pipeline running-time to set the NTP time in the RTCP SR messages(DEPRECATED: Use ntp-time-source property).</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::sdes</NAME>
<TYPE>GstStructure*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>SDES</NICK>
<BLURB>The SDES items of this session.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::tls-database</NAME>
<TYPE>GTlsDatabase*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>TLS database</NICK>
<BLURB>TLS database with anchor certificate authorities used to validate the server certificate.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::tls-validation-flags</NAME>
<TYPE>GTlsCertificateFlags</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>TLS validation flags</NICK>
<BLURB>TLS certificate validation flags used to validate the server certificate.</BLURB>
<DEFAULT>G_TLS_CERTIFICATE_UNKNOWN_CA|G_TLS_CERTIFICATE_BAD_IDENTITY|G_TLS_CERTIFICATE_NOT_ACTIVATED|G_TLS_CERTIFICATE_EXPIRED|G_TLS_CERTIFICATE_REVOKED|G_TLS_CERTIFICATE_INSECURE|G_TLS_CERTIFICATE_GENERIC_ERROR</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::do-retransmission</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Retransmission</NICK>
<BLURB>Ask the server to retransmit lost packets.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::tls-interaction</NAME>
<TYPE>GTlsInteraction*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>TLS interaction</NICK>
<BLURB>A GTlsInteraction object to promt the user for password or certificate.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::ntp-time-source</NAME>
<TYPE>GstRTSPSrcNtpTimeSource</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>NTP Time Source</NICK>
<BLURB>NTP time source for RTCP packets.</BLURB>
<DEFAULT>NTP time based on realtime clock</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::user-agent</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>User Agent</NICK>
<BLURB>The User-Agent string to send to the server.</BLURB>
<DEFAULT>"GStreamer/1.14.3"</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::max-rtcp-rtp-time-diff</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max RTCP RTP Time Diff</NICK>
<BLURB>Maximum amount of time in ms that the RTP time in RTCP SRs is allowed to be ahead (-1 disabled).</BLURB>
<DEFAULT>1000</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::rfc7273-sync</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Sync on RFC7273 clock</NICK>
<BLURB>Synchronize received streams to the RFC7273 clock (requires clock and offset to be provided).</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::default-rtsp-version</NAME>
<TYPE>GstRTSPVersion</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>The RTSP version to try first</NICK>
<BLURB>The RTSP version that should be tried first when negotiating version.</BLURB>
<DEFAULT>GST_RTSP_VERSION_1_0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::max-ts-offset</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max TS Offset</NICK>
<BLURB>The maximum absolute value of the time offset in (nanoseconds). Note, if the ntp-sync parameter is set the default value is changed to 0 (no limit).</BLURB>
<DEFAULT>3000000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::max-ts-offset-adjustment</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Max Timestamp Offset Adjustment</NICK>
<BLURB>The maximum number of nanoseconds per frame that time stamp offsets may be adjusted (0 = no limit).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTSPSrc::backchannel</NAME>
<TYPE>GstRTSPBackchannel</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Backchannel type</NICK>
<BLURB>The type of backchannel to setup. Default is 'none'.</BLURB>
<DEFAULT>No backchannel</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTPDec::latency</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffer latency in ms</NICK>
<BLURB>Amount of ms to buffer.</BLURB>
<DEFAULT>200</DEFAULT>
</ARG>
<ARG>
<NAME>GstLevel::interval</NAME>
<TYPE>guint64</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Interval</NICK>
<BLURB>Interval of time between message posts (in nanoseconds).</BLURB>
<DEFAULT>100000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstLevel::message</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>message</NICK>
<BLURB>Post a 'level' message for each passed interval (deprecated, use the post-messages property instead).</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstLevel::peak-falloff</NAME>
<TYPE>gdouble</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Peak Falloff</NICK>
<BLURB>Decay rate of decay peak after TTL (in dB/sec).</BLURB>
<DEFAULT>10</DEFAULT>
</ARG>
<ARG>
<NAME>GstLevel::peak-ttl</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Peak TTL</NICK>
<BLURB>Time To Live of decay peak before it falls back (in nanoseconds).</BLURB>
<DEFAULT>300000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstLevel::post-messages</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Post Messages</NICK>
<BLURB>Whether to post a 'level' element message on the bus for each passed interval.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDiceTV::square-bits</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,5]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Square Bits</NICK>
<BLURB>The size of the Squares.</BLURB>
<DEFAULT>4</DEFAULT>
</ARG>
<ARG>
<NAME>GstVertigoTV::speed</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0.01,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Speed</NICK>
<BLURB>Control the speed of movement.</BLURB>
<DEFAULT>0.02</DEFAULT>
</ARG>
<ARG>
<NAME>GstVertigoTV::zoom-speed</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[1.01,1.1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Zoom Speed</NICK>
<BLURB>Control the rate of zooming.</BLURB>
<DEFAULT>1.01</DEFAULT>
</ARG>
<ARG>
<NAME>GstRevTV::delay</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Delay</NICK>
<BLURB>Delay in frames between updates.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstRevTV::gain</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,200]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Gain</NICK>
<BLURB>Control gain.</BLURB>
<DEFAULT>50</DEFAULT>
</ARG>
<ARG>
<NAME>GstRevTV::linespace</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Linespace</NICK>
<BLURB>Control line spacing.</BLURB>
<DEFAULT>6</DEFAULT>
</ARG>
<ARG>
<NAME>GstQuarkTV::planes</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,64]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Planes</NICK>
<BLURB>Number of planes.</BLURB>
<DEFAULT>16</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::alpha</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Alpha</NICK>
<BLURB>The value for the alpha channel.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::angle</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,90]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Angle</NICK>
<BLURB>Size of the colorcube to change.</BLURB>
<DEFAULT>20</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::method</NAME>
<TYPE>GstAlphaMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Method</NICK>
<BLURB>How the alpha channels should be created.</BLURB>
<DEFAULT>Set/adjust alpha channel</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::noise-level</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,64]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Noise Level</NICK>
<BLURB>Size of noise radius.</BLURB>
<DEFAULT>2</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::target-b</NAME>
<TYPE>guint</TYPE>
<RANGE><= 255</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Target Blue</NICK>
<BLURB>The blue color value for custom RGB chroma keying.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::target-g</NAME>
<TYPE>guint</TYPE>
<RANGE><= 255</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Target Green</NICK>
<BLURB>The green color value for custom RGB chroma keying.</BLURB>
<DEFAULT>255</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::target-r</NAME>
<TYPE>guint</TYPE>
<RANGE><= 255</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Target Red</NICK>
<BLURB>The red color value for custom RGB chroma keying.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::black-sensitivity</NAME>
<TYPE>guint</TYPE>
<RANGE><= 128</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Black Sensitivity</NICK>
<BLURB>Sensitivity to dark colors.</BLURB>
<DEFAULT>100</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::white-sensitivity</NAME>
<TYPE>guint</TYPE>
<RANGE><= 128</RANGE>
<FLAGS>rw</FLAGS>
<NICK>White Sensitivity</NICK>
<BLURB>Sensitivity to bright colors.</BLURB>
<DEFAULT>100</DEFAULT>
</ARG>
<ARG>
<NAME>GstAlpha::prefer-passthrough</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Prefer Passthrough</NICK>
<BLURB>Don't do any processing for alpha=1.0 if possible.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::description</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>description</NICK>
<BLURB>description.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::genre</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>genre</NICK>
<BLURB>genre.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::ip</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>ip</NICK>
<BLURB>IP address or hostname.</BLURB>
<DEFAULT>"127.0.0.1"</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::mount</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>mount</NICK>
<BLURB>mount.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::password</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>password</NICK>
<BLURB>password.</BLURB>
<DEFAULT>"hackme"</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::port</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,65535]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>port</NICK>
<BLURB>port.</BLURB>
<DEFAULT>8000</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::protocol</NAME>
<TYPE>GstShout2SendProtocol</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>protocol</NICK>
<BLURB>Connection Protocol to use.</BLURB>
<DEFAULT>Http Protocol (icecast 2.x)</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::streamname</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>streamname</NICK>
<BLURB>name of the stream.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::url</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>url</NICK>
<BLURB>the stream's homepage URL.</BLURB>
<DEFAULT>""</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::username</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>username</NICK>
<BLURB>username.</BLURB>
<DEFAULT>"source"</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::public</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>public</NICK>
<BLURB>If the stream should be listed on the server's stream directory.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstShout2send::timeout</NAME>
<TYPE>guint</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>timeout</NICK>
<BLURB>Max amount of time to wait for network activity, in milliseconds.</BLURB>
<DEFAULT>10000</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexDec::enh</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Enh</NICK>
<BLURB>Enable perceptual enhancement.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstPngEnc::compression-level</NAME>
<TYPE>guint</TYPE>
<RANGE><= 9</RANGE>
<FLAGS>rw</FLAGS>
<NICK>compression-level</NICK>
<BLURB>PNG compression level.</BLURB>
<DEFAULT>6</DEFAULT>
</ARG>
<ARG>
<NAME>GstPngEnc::snapshot</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Snapshot</NICK>
<BLURB>Send EOS after encoding a frame, useful for snapshots.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstCACASink::anti-aliasing</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Anti Aliasing</NICK>
<BLURB>Enables Anti-Aliasing.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstCACASink::dither</NAME>
<TYPE>GstCACASinkDithering</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Dither Type</NICK>
<BLURB>Set type of Dither.</BLURB>
<DEFAULT>No dithering</DEFAULT>
</ARG>
<ARG>
<NAME>GstCACASink::screen-height</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>r</FLAGS>
<NICK>Screen Height</NICK>
<BLURB>The height of the screen.</BLURB>
<DEFAULT>25</DEFAULT>
</ARG>
<ARG>
<NAME>GstCACASink::screen-width</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>r</FLAGS>
<NICK>Screen Width</NICK>
<BLURB>The width of the screen.</BLURB>
<DEFAULT>80</DEFAULT>
</ARG>
<ARG>
<NAME>GstJpegEnc::quality</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,100]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Quality</NICK>
<BLURB>Quality of encoding.</BLURB>
<DEFAULT>85</DEFAULT>
</ARG>
<ARG>
<NAME>GstJpegEnc::idct-method</NAME>
<TYPE>GstIDCTMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>IDCT Method</NICK>
<BLURB>The IDCT algorithm to use.</BLURB>
<DEFAULT>Faster, less accurate integer method</DEFAULT>
</ARG>
<ARG>
<NAME>GstJpegEnc::snapshot</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Snapshot</NICK>
<BLURB>Send EOS after encoding a frame, useful for snapshots.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDVDec::clamp-chroma</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Clamp chroma</NICK>
<BLURB>Clamp chroma.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDVDec::clamp-luma</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Clamp luma</NICK>
<BLURB>Clamp luma.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDVDec::drop-factor</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Drop Factor</NICK>
<BLURB>Only decode Nth frame.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstDVDec::quality</NAME>
<TYPE>GstDVDecQualityEnum</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Quality</NICK>
<BLURB>Decoding quality.</BLURB>
<DEFAULT>Highest quality colour decoding</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::brightness</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>brightness</NICK>
<BLURB>brightness.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::contrast</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>contrast</NICK>
<BLURB>contrast.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::dither</NAME>
<TYPE>GstAASinkDitherers</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>dither</NICK>
<BLURB>dither.</BLURB>
<DEFAULT>no dithering</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::driver</NAME>
<TYPE>GstAASinkDrivers</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>driver</NICK>
<BLURB>driver.</BLURB>
<DEFAULT>X11 driver 1.1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::frame-time</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>frame time</NICK>
<BLURB>frame time.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::frames-displayed</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>frames displayed</NICK>
<BLURB>frames displayed.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::gamma</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,5]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>gamma</NICK>
<BLURB>gamma.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::height</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>height</NICK>
<BLURB>height.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::inversion</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>inversion</NICK>
<BLURB>inversion.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::randomval</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>randomval</NICK>
<BLURB>randomval.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAASink::width</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>width</NICK>
<BLURB>width.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::abr</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>ABR</NICK>
<BLURB>Enable average bit-rate (0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::bitrate</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Encoding Bit-rate</NICK>
<BLURB>Specify an encoding bit-rate (in bps). (0 = automatic).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::complexity</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Complexity</NICK>
<BLURB>Set encoding complexity.</BLURB>
<DEFAULT>3</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::dtx</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>DTX</NICK>
<BLURB>Enable discontinuous transmission.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::last-message</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>last-message</NICK>
<BLURB>The last status message.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::nframes</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>NFrames</NICK>
<BLURB>Number of frames per buffer.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::quality</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,10]</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Quality</NICK>
<BLURB>Encoding quality.</BLURB>
<DEFAULT>8</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::vad</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>VAD</NICK>
<BLURB>Enable voice activity detection.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::vbr</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>VBR</NICK>
<BLURB>Enable variable bit-rate.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstSpeexEnc::mode</NAME>
<TYPE>GstSpeexEncMode</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Mode</NICK>
<BLURB>The encoding mode.</BLURB>
<DEFAULT>Auto</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::channel</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,64]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Channel</NICK>
<BLURB>Channel number for listening.</BLURB>
<DEFAULT>63</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::consecutive</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>consecutive frames</NICK>
<BLURB>send n consecutive frames after skipping.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::drop-incomplete</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>drop incomplete</NICK>
<BLURB>drop incomplete frames.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::guid</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>GUID</NICK>
<BLURB>select one of multiple DV devices by its GUID. use a hexadecimal like 0xhhhhhhhhhhhhhhhh. (0 = no guid).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::port</NAME>
<TYPE>gint</TYPE>
<RANGE>[G_MAXULONG,16]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Port</NICK>
<BLURB>Port number (-1 automatic).</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::skip</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>skip frames</NICK>
<BLURB>skip n frames.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::use-avc</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use AV/C</NICK>
<BLURB>Use AV/C VTR control.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDV1394Src::device-name</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>device name</NICK>
<BLURB>user-friendly name of the device.</BLURB>
<DEFAULT>"Default"</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::blocksize</NAME>
<TYPE>guint</TYPE>
<RANGE>[16,65535]</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Blocksize</NICK>
<BLURB>Blocksize in samples.</BLURB>
<DEFAULT>4608</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::escape-coding</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Do Escape coding</NICK>
<BLURB>search for escape codes in the entropy coding stage for slightly better compression.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::exhaustive-model-search</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Do exhaustive model search</NICK>
<BLURB>do exhaustive search of LP coefficient quantization (expensive!).</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::loose-mid-side-stereo</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Loose mid side stereo</NICK>
<BLURB>Loose mid side stereo.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::max-lpc-order</NAME>
<TYPE>guint</TYPE>
<RANGE><= 32</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Max LPC order</NICK>
<BLURB>Max LPC order; 0 => use only fixed predictors.</BLURB>
<DEFAULT>8</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::max-residual-partition-order</NAME>
<TYPE>guint</TYPE>
<RANGE><= 16</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Max residual partition order</NICK>
<BLURB>Max residual partition order (above 4 doesn't usually help much).</BLURB>
<DEFAULT>3</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::mid-side-stereo</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Do mid side stereo</NICK>
<BLURB>Do mid side stereo (only for stereo input).</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::min-residual-partition-order</NAME>
<TYPE>guint</TYPE>
<RANGE><= 16</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Min residual partition order</NICK>
<BLURB>Min residual partition order (above 4 doesn't usually help much).</BLURB>
<DEFAULT>3</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::qlp-coeff-prec-search</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Do QLP coefficients precision search</NICK>
<BLURB>false = use qlp_coeff_precision, true = search around qlp_coeff_precision, take best.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::qlp-coeff-precision</NAME>
<TYPE>guint</TYPE>
<RANGE><= 32</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>QLP coefficients precision</NICK>
<BLURB>Precision in bits of quantized linear-predictor coefficients; 0 = automatic.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::quality</NAME>
<TYPE>GstFlacEncQuality</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Quality</NICK>
<BLURB>Speed versus compression tradeoff.</BLURB>
<DEFAULT>5 - Default</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::rice-parameter-search-dist</NAME>
<TYPE>guint</TYPE>
<RANGE><= 15</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>rice_parameter_search_dist</NICK>
<BLURB>0 = try only calc'd parameter k; else try all [k-dist..k+dist] parameters, use best.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::streamable-subset</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Streamable subset</NICK>
<BLURB>true to limit encoder to generating a Subset stream, else false.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::padding</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Padding</NICK>
<BLURB>Write a PADDING block with this length in bytes.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstFlacEnc::seekpoints</NAME>
<TYPE>gint</TYPE>
<RANGE>>= -2147483647</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Seekpoints</NICK>
<BLURB>Add SEEKTABLE metadata (if > 0, number of entries, if < 0, interval in sec).</BLURB>
<DEFAULT>-10</DEFAULT>
</ARG>
<ARG>
<NAME>GstOssSink::device</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Device</NICK>
<BLURB>OSS device (usually /dev/dspN).</BLURB>
<DEFAULT>"/dev/dsp"</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::writing-app</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Writing application.</NICK>
<BLURB>The name the application that creates the matroska file.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::version</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,2]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>DocType version</NICK>
<BLURB>This parameter determines what Matroska features can be used.</BLURB>
<DEFAULT>2</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::min-index-interval</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Minimum time between index entries</NICK>
<BLURB>An index entry is created every so many nanoseconds.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::streamable</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Determines whether output should be streamable</NICK>
<BLURB>If set to true, the output should be as if it is to be streamed and hence no indexes written or duration written.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::timecodescale</NAME>
<TYPE>gint64</TYPE>
<RANGE>[1,1000000000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Timecode Scale</NICK>
<BLURB>TimecodeScale used to calculate the Raw Timecode of a Block.</BLURB>
<DEFAULT>1000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::max-cluster-duration</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Maximum cluster duration</NICK>
<BLURB>A new cluster will be created if its duration exceeds this value. 0 means no maximum duration.</BLURB>
<DEFAULT>65535000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstMatroskaMux::min-cluster-duration</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Minimum cluster duration</NICK>
<BLURB>Desidered cluster duration as nanoseconds. A new cluster will be created irrespective of this property if a force key unit event is received. 0 means create a new cluster for each video keyframe or for each audio buffer in audio only streams.</BLURB>
<DEFAULT>500000000</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::allowed-timestamp-deviation</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>allowed timestamp deviation</NICK>
<BLURB>allowed average difference in usec between timestamp of next buffer and expected timestamp from analyzing last buffer.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::buffer-count</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>r</FLAGS>
<NICK>buffer count</NICK>
<BLURB>number of buffers in stream.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::expected-buffer-count</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>expected buffer count</NICK>
<BLURB>expected number of buffers in stream.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::expected-length</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>expected length</NICK>
<BLURB>expected length of stream.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::expected-md5</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>expected md5</NICK>
<BLURB>expected md5 of processing the whole data.</BLURB>
<DEFAULT>"---"</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::length</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>r</FLAGS>
<NICK>length</NICK>
<BLURB>length of stream.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::md5</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>md5</NICK>
<BLURB>md5 of processing the whole data.</BLURB>
<DEFAULT>"---"</DEFAULT>
</ARG>
<ARG>
<NAME>GstTest::timestamp-deviation</NAME>
<TYPE>gint64</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>r</FLAGS>
<NICK>timestamp deviation</NICK>
<BLURB>average difference in usec between timestamp of next buffer and expected timestamp from analyzing last buffer.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstProgressReport::silent</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Do not print output to stdout</NICK>
<BLURB>Do not print output to stdout.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstProgressReport::update-freq</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 1</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Update Frequency</NICK>
<BLURB>Number of seconds between reports when data is flowing.</BLURB>
<DEFAULT>5</DEFAULT>
</ARG>
<ARG>
<NAME>GstProgressReport::format</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>format</NICK>
<BLURB>Format to use for the querying.</BLURB>
<DEFAULT>"auto"</DEFAULT>
</ARG>
<ARG>
<NAME>GstProgressReport::do-query</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use a query instead of buffer metadata to determine stream position</NICK>
<BLURB>Use a query instead of buffer metadata to determine stream position.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstNavSeek::seek-offset</NAME>
<TYPE>gdouble</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Seek Offset</NICK>
<BLURB>Time in seconds to seek by.</BLURB>
<DEFAULT>5</DEFAULT>
</ARG>
<ARG>
<NAME>GstBreakMyData::probability</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>probability</NICK>
<BLURB>probability for each byte in the buffer to be changed.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstBreakMyData::seed</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>seed</NICK>
<BLURB>seed for randomness (initialized when going from READY to PAUSED).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstBreakMyData::set-to</NAME>
<TYPE>gint</TYPE>
<RANGE>[G_MAXULONG,255]</RANGE>
<FLAGS>rwx</FLAGS>
<NICK>set-to</NICK>
<BLURB>set changed bytes to this value (-1 means random value.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstBreakMyData::skip</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>skip</NICK>
<BLURB>amount of bytes skipped at the beginning of stream.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstCutter::leaky</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Leaky</NICK>
<BLURB>do we leak buffers when below threshold ?.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstCutter::pre-length</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Pre-recording buffer length</NICK>
<BLURB>Length of pre-recording buffer (in nanoseconds).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstCutter::run-length</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Run length</NICK>
<BLURB>Length of drop below threshold before cut_stop (in nanoseconds).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstCutter::threshold</NAME>
<TYPE>gdouble</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Threshold</NICK>
<BLURB>Volume threshold before trigger.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstCutter::threshold-dB</NAME>
<TYPE>gdouble</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Threshold (dB)</NICK>
<BLURB>Volume threshold before trigger (in dB).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoFlip::method</NAME>
<TYPE>GstVideoFlipMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>method</NICK>
<BLURB>method (deprecated, use video-direction instead).</BLURB>
<DEFAULT>Identity (no rotation)</DEFAULT>
</ARG>
<ARG>
<NAME>GstRtpMP4VPay::config-interval</NAME>
<TYPE>guint</TYPE>
<RANGE><= 3600</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Config Send Interval</NICK>
<BLURB>Send Config Insertion Interval in seconds (configuration headers will be multiplexed in the data stream when detected.) (0 = disabled).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultipartMux::boundary</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Boundary</NICK>
<BLURB>Boundary string.</BLURB>
<DEFAULT>"ThisRandomString"</DEFAULT>
</ARG>
<ARG>
<NAME>GstID3Demux::prefer-v1</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Prefer version 1 tag</NICK>
<BLURB>Prefer tags from ID3v1 tag at end of file when both ID3v1 and ID3v2 tags are present.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDynUDPSink::close-socket</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Close socket</NICK>
<BLURB>Close socket if passed as property on state change.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstDynUDPSink::socket</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Socket</NICK>
<BLURB>Socket to use for UDP sending. (NULL == allocate).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstDynUDPSink::bind-address</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bind Address</NICK>
<BLURB>Address to bind the socket to.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstDynUDPSink::bind-port</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,65535]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bind Port</NICK>
<BLURB>Port to bind the socket to.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstDynUDPSink::socket-v6</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Socket IPv6</NICK>
<BLURB>Socket to use for UDPv6 sending. (NULL == allocate).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::bytes-served</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Bytes served</NICK>
<BLURB>Total number of bytes sent to all clients.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::bytes-to-serve</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Bytes to serve</NICK>
<BLURB>Number of bytes received to serve to clients.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::clients</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Clients</NICK>
<BLURB>A comma separated list of host:port pairs with destinations.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::auto-multicast</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Automatically join/leave multicast groups</NICK>
<BLURB>Automatically join/leave the multicast groups, FALSE means user has to do it himself.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::loop</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Loopback</NICK>
<BLURB>Used for setting the multicast loop parameter. TRUE = enable, FALSE = disable.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::qos-dscp</NAME>
<TYPE>gint</TYPE>
<RANGE>[G_MAXULONG,63]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>QoS diff srv code point</NICK>
<BLURB>Quality of Service, differentiated services code point (-1 default).</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::ttl</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,255]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Unicast TTL</NICK>
<BLURB>Used for setting the unicast TTL parameter.</BLURB>
<DEFAULT>64</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::ttl-mc</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,255]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast TTL</NICK>
<BLURB>Used for setting the multicast TTL parameter.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::send-duplicates</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Send Duplicates</NICK>
<BLURB>When a distination/port pair is added multiple times, send packets multiple times as well.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::buffer-size</NAME>
<TYPE>gint</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Buffer Size</NICK>
<BLURB>Size of the kernel send buffer in bytes, 0=default.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::close-socket</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Close socket</NICK>
<BLURB>Close socket if passed as property on state change.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::socket</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Socket Handle</NICK>
<BLURB>Socket to use for UDP sending. (NULL == allocate).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::used-socket</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Used Socket Handle</NICK>
<BLURB>Socket currently in use for UDP sending. (NULL == no socket).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::force-ipv4</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Force IPv4</NICK>
<BLURB>Forcing the use of an IPv4 socket (DEPRECATED, has no effect anymore).</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::multicast-iface</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Multicast Interface</NICK>
<BLURB>The network interface on which to join the multicast group.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::bind-address</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bind Address</NICK>
<BLURB>Address to bind the socket to.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::bind-port</NAME>
<TYPE>gint</TYPE>
<RANGE>[0,65535]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bind Port</NICK>
<BLURB>Port to bind the socket to.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::socket-v6</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Socket Handle IPv6</NICK>
<BLURB>Socket to use for UDPv6 sending. (NULL == allocate).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstMultiUDPSink::used-socket-v6</NAME>
<TYPE>GSocket*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Used Socket Handle IPv6</NICK>
<BLURB>Socket currently in use for UDPv6 sending. (NULL == no socket).</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::display-name</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Display</NICK>
<BLURB>X Display Name.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::show-pointer</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Show Mouse Pointer</NICK>
<BLURB>Show mouse pointer (if XFixes extension enabled).</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::endx</NAME>
<TYPE>guint</TYPE>
<RANGE><= G_MAXINT</RANGE>
<FLAGS>rw</FLAGS>
<NICK>End X</NICK>
<BLURB>X coordinate of bottom right corner of area to be recorded (0 for bottom right of screen).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::endy</NAME>
<TYPE>guint</TYPE>
<RANGE><= G_MAXINT</RANGE>
<FLAGS>rw</FLAGS>
<NICK>End Y</NICK>
<BLURB>Y coordinate of bottom right corner of area to be recorded (0 for bottom right of screen).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::startx</NAME>
<TYPE>guint</TYPE>
<RANGE><= G_MAXINT</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Start X co-ordinate</NICK>
<BLURB>X coordinate of top left corner of area to be recorded (0 for top left of screen).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::starty</NAME>
<TYPE>guint</TYPE>
<RANGE><= G_MAXINT</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Start Y co-ordinate</NICK>
<BLURB>Y coordinate of top left corner of area to be recorded (0 for top left of screen).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::use-damage</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Use XDamage</NICK>
<BLURB>Use XDamage (if XDamage extension enabled).</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::remote</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Remote dispay</NICK>
<BLURB>Whether the display is remote.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::xid</NAME>
<TYPE>guint64</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Window XID</NICK>
<BLURB>Window XID to capture from.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstXImageSrc::xname</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Window name</NICK>
<BLURB>Window name to capture from.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBalance::brightness</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-1,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Brightness</NICK>
<BLURB>brightness.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBalance::contrast</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,2]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Contrast</NICK>
<BLURB>contrast.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBalance::hue</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[-1,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Hue</NICK>
<BLURB>hue.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoBalance::saturation</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,2]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Saturation</NICK>
<BLURB>saturation.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultipartDemux::boundary</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rwx</FLAGS>
<NICK>Boundary</NICK>
<BLURB>The boundary string separating data, automatic if NULL.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstMultipartDemux::single-stream</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Single Stream</NICK>
<BLURB>Assume that there is only one stream whose content-type will not change and emit no-more-pads as soon as the first boundary content is parsed, decoded, and pads are linked.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstAviMux::bigfile</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bigfile Support (>2GB)</NICK>
<BLURB>Support for openDML-2.0 (big) AVI files.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstJpegDec::idct-method</NAME>
<TYPE>GstIDCTMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>IDCT Method</NICK>
<BLURB>The IDCT algorithm to use.</BLURB>
<DEFAULT>Faster, less accurate integer method</DEFAULT>
</ARG>
<ARG>
<NAME>GstJpegDec::max-errors</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Maximum Consecutive Decoding Errors</NICK>
<BLURB>(Deprecated) Error out after receiving N consecutive decoding errors (-1 = never fail, 0 = automatic, 1 = fail on first error).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRTPiLBCDepay::mode</NAME>
<TYPE>iLBCMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>iLBC frame mode.</BLURB>
<DEFAULT>30ms frames</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioPanorama::panorama</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[-1,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Panorama</NICK>
<BLURB>Position in stereo panorama (-1.0 left -> 1.0 right).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioPanorama::method</NAME>
<TYPE>GstAudioPanoramaMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Panning method</NICK>
<BLURB>Psychoacoustic mode keeps same perceived loudness, simple mode just controls volume of one channel.</BLURB>
<DEFAULT>Psychoacoustic Panning (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioInvert::degree</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Degree</NICK>
<BLURB>Degree of inversion.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioAmplify::amplification</NAME>
<TYPE>gfloat</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Amplification</NICK>
<BLURB>Factor of amplification.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioAmplify::clipping-method</NAME>
<TYPE>GstAudioAmplifyClippingMethod</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Clipping method</NICK>
<BLURB>Selects how to handle values higher than the maximum.</BLURB>
<DEFAULT>Normal clipping (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioDynamic::characteristics</NAME>
<TYPE>GstAudioDynamicCharacteristics</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Characteristics</NICK>
<BLURB>Selects whether the ratio should be applied smooth (soft-knee) or hard (hard-knee).</BLURB>
<DEFAULT>Hard Knee (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioDynamic::mode</NAME>
<TYPE>GstAudioDynamicMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>Selects whether the filter should work on loud samples (compressor) orquiet samples (expander).</BLURB>
<DEFAULT>Compressor (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioDynamic::ratio</NAME>
<TYPE>gfloat</TYPE>
<RANGE>>= 0</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Ratio</NICK>
<BLURB>Ratio that should be applied.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioDynamic::threshold</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,1]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Threshold</NICK>
<BLURB>Threshold until the filter is activated.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::bitrate</NAME>
<TYPE>guint</TYPE>
<RANGE><= 9600000</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bitrate</NICK>
<BLURB>Try to encode with this average bitrate (bits/sec). This enables lossy encoding, values smaller than 24000 disable it again.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::bits-per-sample</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0,24]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bits per sample</NICK>
<BLURB>Try to encode with this amount of bits per sample. This enables lossy encoding, values smaller than 2.0 disable it again.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::correction-mode</NAME>
<TYPE>GstWavpackEncCorrectionMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Correction stream mode</NICK>
<BLURB>Use this mode for the correction stream. Only works in lossy mode!.</BLURB>
<DEFAULT>Create no correction file</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::extra-processing</NAME>
<TYPE>guint</TYPE>
<RANGE><= 6</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Extra processing</NICK>
<BLURB>Use better but slower filters for better compression/quality.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::joint-stereo-mode</NAME>
<TYPE>GstWavpackEncJSMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Joint-Stereo mode</NICK>
<BLURB>Use this joint-stereo mode.</BLURB>
<DEFAULT>auto</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::md5</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>MD5</NICK>
<BLURB>Store MD5 hash of raw samples within the file.</BLURB>
<DEFAULT>FALSE</DEFAULT>
</ARG>
<ARG>
<NAME>GstWavpackEnc::mode</NAME>
<TYPE>GstWavpackEncMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Encoding mode</NICK>
<BLURB>Speed versus compression tradeoff.</BLURB>
<DEFAULT>Normal Compression</DEFAULT>
</ARG>
<ARG>
<NAME>GstRtpMP2TDepay::skip-first-bytes</NAME>
<TYPE>guint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Skip first bytes</NICK>
<BLURB>The amount of bytes that need to be skipped at the beginning of the payload.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstRtpH263PPay::fragmentation-mode</NAME>
<TYPE>GstFragmentationMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Fragmentation Mode</NICK>
<BLURB>Packet Fragmentation Mode.</BLURB>
<DEFAULT>Normal</DEFAULT>
</ARG>
<ARG>
<NAME>GstGamma::gamma</NAME>
<TYPE>gdouble</TYPE>
<RANGE>[0.01,10]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Gamma</NICK>
<BLURB>gamma.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoCrop::bottom</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Bottom</NICK>
<BLURB>Pixels to crop at bottom (-1 to auto-crop).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoCrop::left</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Left</NICK>
<BLURB>Pixels to crop at left (-1 to auto-crop).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoCrop::right</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Right</NICK>
<BLURB>Pixels to crop at right (-1 to auto-crop).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstVideoCrop::top</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Top</NICK>
<BLURB>Pixels to crop at top (-1 to auto-crop).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::device</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Device</NICK>
<BLURB>Device location.</BLURB>
<DEFAULT>"/dev/video0"</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::device-name</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Device name</NICK>
<BLURB>Name of the device.</BLURB>
<DEFAULT>NULL</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::flags</NAME>
<TYPE>GstV4l2DeviceTypeFlags</TYPE>
<RANGE></RANGE>
<FLAGS>r</FLAGS>
<NICK>Flags</NICK>
<BLURB>Device type flags.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::device-fd</NAME>
<TYPE>gint</TYPE>
<RANGE>>= G_MAXULONG</RANGE>
<FLAGS>r</FLAGS>
<NICK>File descriptor</NICK>
<BLURB>File descriptor of the device.</BLURB>
<DEFAULT>-1</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::brightness</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Brightness</NICK>
<BLURB>Picture brightness, or more precisely, the black level.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::contrast</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Contrast</NICK>
<BLURB>Picture contrast or luma gain.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::hue</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Hue</NICK>
<BLURB>Hue or color balance.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::saturation</NAME>
<TYPE>gint</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Saturation</NICK>
<BLURB>Picture color saturation or chroma gain.</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::norm</NAME>
<TYPE>V4L2_TV_norms</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>TV norm</NICK>
<BLURB>video standard.</BLURB>
<DEFAULT>none</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::io-mode</NAME>
<TYPE>GstV4l2IOMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>IO mode</NICK>
<BLURB>I/O mode.</BLURB>
<DEFAULT>GST_V4L2_IO_AUTO</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::extra-controls</NAME>
<TYPE>GstStructure*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Extra Controls</NICK>
<BLURB>Extra v4l2 controls (CIDs) for the device.</BLURB>
<DEFAULT></DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::force-aspect-ratio</NAME>
<TYPE>gboolean</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Force aspect ratio</NICK>
<BLURB>When enabled, the pixel aspect ratio will be enforced.</BLURB>
<DEFAULT>TRUE</DEFAULT>
</ARG>
<ARG>
<NAME>GstV4l2Src::pixel-aspect-ratio</NAME>
<TYPE>gchar*</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Pixel Aspect Ratio</NICK>
<BLURB>Overwrite the pixel aspect ratio of the device.</BLURB>
<DEFAULT>"1/1"</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::lower-frequency</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Lower frequency</NICK>
<BLURB>Start frequency of the band (Hz).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::mode</NAME>
<TYPE>GstAudioChebBandMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>Low pass or high pass mode.</BLURB>
<DEFAULT>Band pass (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::poles</NAME>
<TYPE>gint</TYPE>
<RANGE>[4,32]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Poles</NICK>
<BLURB>Number of poles to use, will be rounded up to the next multiply of four.</BLURB>
<DEFAULT>4</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::ripple</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,200]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Ripple</NICK>
<BLURB>Amount of ripple (dB).</BLURB>
<DEFAULT>0.25</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::type</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,2]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Type</NICK>
<BLURB>Type of the chebychev filter.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebBand::upper-frequency</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Upper frequency</NICK>
<BLURB>Stop frequency of the band (Hz).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebLimit::cutoff</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Cutoff</NICK>
<BLURB>Cut off frequency (Hz).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebLimit::mode</NAME>
<TYPE>GstAudioChebLimitMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>Low pass or high pass mode.</BLURB>
<DEFAULT>Low pass (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebLimit::poles</NAME>
<TYPE>gint</TYPE>
<RANGE>[2,32]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Poles</NICK>
<BLURB>Number of poles to use, will be rounded up to the next even number.</BLURB>
<DEFAULT>4</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebLimit::ripple</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,200]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Ripple</NICK>
<BLURB>Amount of ripple (dB).</BLURB>
<DEFAULT>0.25</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioChebLimit::type</NAME>
<TYPE>gint</TYPE>
<RANGE>[1,2]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Type</NICK>
<BLURB>Type of the chebychev filter.</BLURB>
<DEFAULT>1</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincBand::lower-frequency</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Lower Frequency</NICK>
<BLURB>Cut-off lower frequency (Hz).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincBand::upper-frequency</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Upper Frequency</NICK>
<BLURB>Cut-off upper frequency (Hz).</BLURB>
<DEFAULT>0</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincBand::mode</NAME>
<TYPE>GstAudioWSincBandMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>Band pass or band reject mode.</BLURB>
<DEFAULT>Band pass (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincBand::window</NAME>
<TYPE>GstAudioWSincBandWindow</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Window</NICK>
<BLURB>Window function to use.</BLURB>
<DEFAULT>Hamming window (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincBand::length</NAME>
<TYPE>gint</TYPE>
<RANGE>[3,256000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Length</NICK>
<BLURB>Filter kernel length, will be rounded to the next odd number.</BLURB>
<DEFAULT>101</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincLimit::length</NAME>
<TYPE>gint</TYPE>
<RANGE>[3,256000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>Length</NICK>
<BLURB>Filter kernel length, will be rounded to the next odd number.</BLURB>
<DEFAULT>101</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincLimit::mode</NAME>
<TYPE>GstAudioWSincLimitMode</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Mode</NICK>
<BLURB>Low pass or high pass mode.</BLURB>
<DEFAULT>Low pass (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincLimit::window</NAME>
<TYPE>GstAudioWSincLimitWindow</TYPE>
<RANGE></RANGE>
<FLAGS>rw</FLAGS>
<NICK>Window</NICK>
<BLURB>Window function to use.</BLURB>
<DEFAULT>Hamming window (default)</DEFAULT>
</ARG>
<ARG>
<NAME>GstAudioWSincLimit::cutoff</NAME>
<TYPE>gfloat</TYPE>
<RANGE>[0,100000]</RANGE>
<FLAGS>rw</FLAGS>
<NICK>