gst/smpte/paint.c

/* GStreamer
 * Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Library General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Library General Public License for more details.
 *
 * You should have received a copy of the GNU Library General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
 * Boston, MA 02110-1301, USA.
 */

#ifdef HAVE_CONFIG_H
#include "config.h"
#endif

#include <math.h>
#include <stdlib.h>
#include "paint.h"

#ifndef M_PI
#define M_PI  3.14159265358979323846
#endif

void
gst_smpte_paint_vbox (guint32 * dest, gint stride,
    gint x0, gint y0, gint c0, gint x1, gint y1, gint c1)
{
  gint i, j;
  gint width, height;

  width = x1 - x0;
  height = y1 - y0;

  g_assert (width > 0);
  g_assert (height > 0);

  dest = dest + y0 * stride + x0;

  for (i = 0; i < height; i++) {
    for (j = 0; j < width; j++) {
      dest[j] = (c1 * j + c0 * (width - j)) / width;
    }
    dest += stride;
  }
}

void
gst_smpte_paint_hbox (guint32 * dest, gint stride,
    gint x0, gint y0, gint c0, gint x1, gint y1, gint c1)
{
  gint i, j;
  gint width, height;

  width = x1 - x0;
  height = y1 - y0;

  g_assert (width > 0);
  g_assert (height > 0);

  dest = dest + y0 * stride + x0;

  for (i = 0; i < height; i++) {
    guint32 value = (c1 * i + c0 * (height - i)) / height;

    for (j = 0; j < width; j++) {
      dest[j] = value;
    }
    dest += stride;
  }
}

#define STEP_3D_LINE(dxabs,dyabs,dzabs,sdx,sdy,sdz,xr,yr,zr,px,py,pz)           \
G_STMT_START {                                          \
  if (dxabs >= dyabs && dxabs >= dzabs) {               \
    yr += dyabs;                                        \
    zr += dzabs;                                        \
    if (yr >= dxabs) {                                  \
      py += sdy;                                        \
      yr -= dxabs;                                      \
    }                                                   \
    if (zr >= dzabs) {                                  \
      pz += sdz;                                        \
      zr -= dxabs;                                      \
    }                                                   \
    px += sdx;                                          \
  } else if (dyabs >= dxabs && dyabs >= dzabs) {        \
    xr += dxabs;                                        \
    zr += dzabs;                                        \
    if (xr >= dyabs) {                                  \
      px += sdx;                                        \
      xr -= dyabs;                                      \
    }                                                   \
    if (zr >= dzabs) {                                  \
      pz += sdz;                                        \
      zr -= dyabs;                                      \
    }                                                   \
    py += sdy;                                          \
  } else {                                              \
    yr += dyabs;                                        \
    xr += dxabs;                                        \
    if (yr >= dyabs) {                                  \
      py += sdy;                                        \
      yr -= dzabs;                                      \
    }                                                   \
    if (xr >= dyabs) {                                  \
      px += sdx;                                        \
      xr -= dzabs;                                      \
    }                                                   \
    pz += sdz;                                          \
  }                                                     \
} G_STMT_END

#define SWAP_INT(a,b)           \
G_STMT_START {                  \
  gint tmp;                     \
  tmp = (a);                    \
  (a) = (b);                    \
  (b) = (tmp);                  \
} G_STMT_END

#define SIGN(a) ((a) < 0 ? -1 : 1)

#define PREPARE_3D_LINE(x0,y0,z0,x1,y1,z1,dxabs,dyabs,dzabs,sdx,sdy,sdz,xr,yr,zr,px,py,pz)\
G_STMT_START {                  \
  gint dx, dy, dz;              \
  dx = x1 - x0;                 \
  dy = y1 - y0;                 \
  dz = z1 - z0;                 \
  dxabs = abs (dx);             \
  dyabs = abs (dy);             \
  dzabs = abs (dz);             \
  sdx = SIGN (dx);              \
  sdy = SIGN (dy);              \
  sdz = SIGN (dz);              \
  xr = dxabs >> 1;              \
  yr = dyabs >> 1;              \
  zr = dzabs >> 1;              \
  px = x0;                      \
  py = y0;                      \
  pz = z0;                      \
} G_STMT_END

void
gst_smpte_paint_triangle_linear (guint32 * dest, gint stride,
    gint x0, gint y0, gint c0,
    gint x1, gint y1, gint c1, gint x2, gint y2, gint c2)
{
  gint sdxl, sdyl, sdcl, dxlabs, dylabs, dclabs, xrl, yrl, crl, pxl, pyl, pcl;
  gint sdxr, sdyr, sdcr, dxrabs, dyrabs, dcrabs, xrr, yrr, crr, pxr, pyr, pcr;
  gint i, j, k, seg_start, seg_end;

  if (y0 > y1) {
    SWAP_INT (x0, x1);
    SWAP_INT (y0, y1);
    SWAP_INT (c0, c1);
  }
  if (y0 > y2) {
    SWAP_INT (x0, x2);
    SWAP_INT (y0, y2);
    SWAP_INT (c0, c2);
  }
  if (y1 > y2) {
    SWAP_INT (x1, x2);
    SWAP_INT (y1, y2);
    SWAP_INT (c1, c2);
  }

  PREPARE_3D_LINE (x0, y0, c0, x2, y2, c2,
      dxlabs, dylabs, dclabs, sdxl, sdyl, sdcl, xrl, yrl, crl, pxl, pyl, pcl);

  PREPARE_3D_LINE (x0, y0, c0, x1, y1, c1,
      dxrabs, dyrabs, dcrabs, sdxr, sdyr, sdcr, xrr, yrr, crr, pxr, pyr, pcr);

  dest = dest + stride * y0;
  seg_start = y0;
  seg_end = y1;

  /* do two passes */
  for (k = 0; k < 2; k++) {
    for (i = seg_start; i < seg_end; i++) {
      gint s = pxl, e = pxr, sc = pcl, ec = pcr;
      gint sign = SIGN (e - s);

      e += sign;
      for (j = s; j != e; j += sign) {
        dest[j] = (ec * (j - s) + sc * (e - j)) / (e - s);
      }

      while (pyr == i) {
        STEP_3D_LINE (dxrabs, dyrabs, dcrabs, sdxr, sdyr, sdcr,
            xrr, yrr, crr, pxr, pyr, pcr);
      }
      while (pyl == i) {
        STEP_3D_LINE (dxlabs, dylabs, dclabs, sdxl, sdyl, sdcl,
            xrl, yrl, crl, pxl, pyl, pcl);
      }
      dest += stride;
    }

    PREPARE_3D_LINE (x1, y1, c1, x2, y2, c2,
        dxrabs, dyrabs, dcrabs, sdxr, sdyr, sdcr, xrr, yrr, crr, pxr, pyr, pcr);

    seg_start = y1;
    seg_end = y2;
  }
}

static void
draw_bresenham_line (guint32 * dest, gint stride,
    gint x0, gint y0, gint x1, gint y1, guint32 col)
{
  gint dx, dy;
  gint x_incr, y_incr;
  gint i, dpr, dpru, P, indep;

  dx = abs (x1 - x0);
  dy = abs (y1 - y0);

  dest = dest + y0 * stride + x0;

  x_incr = SIGN (x1 - x0);
  y_incr = SIGN (y1 - y0) * stride;

  if (dx >= dy) {
    dpr = dy << 1;
    i = dx;
    indep = x_incr;
  } else {
    dpr = dx << 1;
    i = dy;
    indep = y_incr;
  }

  dpru = dpr - (i << 1);
  P = dpr - i;

  for (; i >= 0; i--) {
    *dest = col;

    if (P > 0) {
      dest += x_incr;
      dest += y_incr;
      P += dpru;
    } else {
      dest += indep;
      P += dpr;
    }
  }
}

void
gst_smpte_paint_triangle_clock (guint32 * dest, gint stride,
    gint x0, gint y0, gint c0,
    gint x1, gint y1, gint c1, gint x2, gint y2, gint c2)
{
  gint i;
  gint sign;
  gfloat angle, angle_e;
  gfloat len1;

  angle_e = acos (((x1 - x0) * (x2 - x0) + (y1 - y0) * (y2 - y0)) /
      (sqrt ((x1 - x0) * (x1 - x0) + (y1 - y0) * (y1 - y0)) *
          sqrt ((x2 - x0) * (x2 - x0) + (y2 - y0) * (y2 - y0))));

  len1 = sqrt ((x1 - x0) * (x1 - x0) + (y1 - y0) * (y1 - y0));

  if (x1 == x2) {
    sign = SIGN (y2 - y1);

    for (i = y1; i != (y2 + sign); i += sign) {
      if (y1 == i)
        angle = 0;
      else
        angle = acos (((x1 - x0) * (x2 - x0) + (y1 - y0) * (i - y0)) /
            (len1 * sqrt ((x1 - x0) * (x1 - x0) + (i - y0) * (i -
                        y0)))) / angle_e;

      draw_bresenham_line (dest, stride,
          x0, y0, x1, i, (c2 * angle + c1 * (1.0 - angle)));
    }
  } else if (y1 == y2) {
    sign = SIGN (x2 - x1);

    for (i = x1; i != (x2 + sign); i += sign) {
      if (x1 == i)
        angle = 0;
      else
        angle = acos (((x1 - x0) * (i - x0) + (y1 - y0) * (y2 - y0)) /
            (len1 * sqrt ((i - x0) * (i - x0) + (y2 - y0) * (y2 -
                        y0)))) / angle_e;

      draw_bresenham_line (dest, stride,
          x0, y0, i, y1, (c2 * angle + c1 * (1.0 - angle)));
    }
  } else {
    g_warning ("paint triangle clock: not supported");
    return;
  }
}

void
gst_smpte_paint_box_clock (guint32 * dest, gint stride,
    gint x0, gint y0, gint c0,
    gint x1, gint y1, gint c1, gint x2, gint y2, gint c2)
{
  gfloat angle_m, col_m;
  gint xv, yv;

  if (x1 == x0) {
    xv = x2;
    yv = y1;
  } else if (y1 == y0) {
    xv = x1;
    yv = y2;
  } else {
    g_warning ("paint box clock: not supported");
    return;
  }

  angle_m = 2 * acos (((x1 - x0) * (xv - x0) + (y1 - y0) * (yv - y0)) /
      (sqrt ((x1 - x0) * (x1 - x0) + (y1 - y0) * (y1 - y0)) *
          sqrt ((xv - x0) * (xv - x0) + (yv - y0) * (yv - y0)))) / M_PI;

  col_m = c2 * angle_m + c1 * (1.0 - angle_m);

  gst_smpte_paint_triangle_clock (dest, stride,
      x0, y0, c0, x1, y1, c1, xv, yv, col_m);
  gst_smpte_paint_triangle_clock (dest, stride,
      x0, y0, c0, xv, yv, col_m, x2, y2, c2);
}