coral / imx-gst-plugins-good / 03cbb255cb5a1414907dc644a9afaf15d3ccaa3d / . / gst / law / mulaw-conversion.c

/* | |

* This routine converts from linear to ulaw | |

* 29 September 1989 | |

* | |

* Craig Reese: IDA/Supercomputing Research Center | |

* Joe Campbell: Department of Defense | |

* | |

* References: | |

* 1) CCITT Recommendation G.711 (very difficult to follow) | |

* 2) "A New Digital Technique for Implementation of Any | |

* Continuous PCM Companding Law," Villeret, Michel, | |

* et al. 1973 IEEE Int. Conf. on Communications, Vol 1, | |

* 1973, pg. 11.12-11.17 | |

* 3) MIL-STD-188-113,"Interoperability and Performance Standards | |

* for Analog-to_Digital Conversion Techniques," | |

* 17 February 1987 | |

* | |

* Input: Signed 16 bit linear sample | |

* Output: 8 bit ulaw sample | |

*/ | |

#ifdef HAVE_CONFIG_H | |

#include "config.h" | |

#endif | |

#include <glib.h> | |

#include "mulaw-conversion.h" | |

#undef ZEROTRAP /* turn on the trap as per the MIL-STD */ | |

#define BIAS 0x84 /* define the add-in bias for 16 bit samples */ | |

#define CLIP 32635 | |

void | |

mulaw_encode (gint16 * in, guint8 * out, gint numsamples) | |

{ | |

static const gint16 exp_lut[256] = { | |

0, 0, 1, 1, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3, | |

4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, | |

5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, | |

5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, | |

6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, | |

6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, | |

6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, | |

6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, | |

7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7 | |

}; | |

gint16 sign, exponent, mantissa; | |

gint16 sample; | |

guint8 ulawbyte; | |

gint i; | |

for (i = 0; i < numsamples; i++) { | |

sample = in[i]; | |

/** get the sample into sign-magnitude **/ | |

sign = (sample >> 8) & 0x80; /* set aside the sign */ | |

if (sign != 0) { | |

sample = -sample; /* get magnitude */ | |

} | |

/* sample can be zero because we can overflow in the inversion, | |

* checking against the unsigned version solves this */ | |

if (((guint16) sample) > CLIP) | |

sample = CLIP; /* clip the magnitude */ | |

/** convert from 16 bit linear to ulaw **/ | |

sample = sample + BIAS; | |

exponent = exp_lut[(sample >> 7) & 0xFF]; | |

mantissa = (sample >> (exponent + 3)) & 0x0F; | |

ulawbyte = ~(sign | (exponent << 4) | mantissa); | |

#ifdef ZEROTRAP | |

if (ulawbyte == 0) | |

ulawbyte = 0x02; /* optional CCITT trap */ | |

#endif | |

out[i] = ulawbyte; | |

} | |

} | |

/* | |

* This routine converts from ulaw to 16 bit linear | |

* 29 September 1989 | |

* | |

* Craig Reese: IDA/Supercomputing Research Center | |

* | |

* References: | |

* 1) CCITT Recommendation G.711 (very difficult to follow) | |

* 2) MIL-STD-188-113,"Interoperability and Performance Standards | |

* for Analog-to_Digital Conversion Techniques," | |

* 17 February 1987 | |

* | |

* Input: 8 bit ulaw sample | |

* Output: signed 16 bit linear sample | |

*/ | |

void | |

mulaw_decode (guint8 * in, gint16 * out, gint numsamples) | |

{ | |

static const gint16 exp_lut[8] = | |

{ 0, 132, 396, 924, 1980, 4092, 8316, 16764 }; | |

gint16 sign, exponent, mantissa; | |

guint8 ulawbyte; | |

gint16 linear; | |

gint i; | |

for (i = 0; i < numsamples; i++) { | |

ulawbyte = in[i]; | |

ulawbyte = ~ulawbyte; | |

sign = (ulawbyte & 0x80); | |

exponent = (ulawbyte >> 4) & 0x07; | |

mantissa = ulawbyte & 0x0F; | |

linear = exp_lut[exponent] + (mantissa << (exponent + 3)); | |

if (sign != 0) | |

linear = -linear; | |

out[i] = linear; | |

} | |

} |