blob: 77cf6cd904543c07a61c5e000ee51ec923785eb8 [file] [log] [blame]
* Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
#include <arch.h>
#include <asm_macros.S>
#include <assert_macros.S>
.globl smc
.globl zeromem
.globl zero_normalmem
.globl memcpy4
.globl disable_mmu_icache_secure
.globl disable_mmu_secure
func smc
* For AArch32 only r0-r3 will be in the registers;
* rest r4-r6 will be pushed on to the stack. So here, we'll
* have to load them from the stack to registers r4-r6 explicitly.
* Clobbers: r4-r6
ldm sp, {r4, r5, r6}
smc #0
endfunc smc
/* -----------------------------------------------------------------------
* void zeromem(void *mem, unsigned int length)
* Initialise a region in normal memory to 0. This functions complies with the
* AAPCS and can be called from C code.
* -----------------------------------------------------------------------
func zeromem
* Readable names for registers
* Registers r0, r1 and r2 are also set by zeromem which
* branches into the fallback path directly, so cursor, length and
* stop_address should not be retargeted to other registers.
cursor .req r0 /* Start address and then current address */
length .req r1 /* Length in bytes of the region to zero out */
* Reusing the r1 register as length is only used at the beginning of
* the function.
stop_address .req r1 /* Address past the last zeroed byte */
zeroreg1 .req r2 /* Source register filled with 0 */
zeroreg2 .req r3 /* Source register filled with 0 */
tmp .req r12 /* Temporary scratch register */
mov zeroreg1, #0
/* stop_address is the address past the last to zero */
add stop_address, cursor, length
* Length cannot be used anymore as it shares the same register with
* stop_address.
.unreq length
* If the start address is already aligned to 8 bytes, skip this loop.
tst cursor, #(8-1)
beq .Lzeromem_8bytes_aligned
/* Calculate the next address aligned to 8 bytes */
orr tmp, cursor, #(8-1)
adds tmp, tmp, #1
/* If it overflows, fallback to byte per byte zeroing */
beq .Lzeromem_1byte_aligned
/* If the next aligned address is after the stop address, fall back */
cmp tmp, stop_address
bhs .Lzeromem_1byte_aligned
/* zero byte per byte */
strb zeroreg1, [cursor], #1
cmp cursor, tmp
bne 1b
/* zero 8 bytes at a time */
/* Calculate the last 8 bytes aligned address. */
bic tmp, stop_address, #(8-1)
cmp cursor, tmp
bhs 2f
mov zeroreg2, #0
stmia cursor!, {zeroreg1, zeroreg2}
cmp cursor, tmp
blo 1b
/* zero byte per byte */
cmp cursor, stop_address
beq 2f
strb zeroreg1, [cursor], #1
cmp cursor, stop_address
bne 1b
bx lr
.unreq cursor
* length is already unreq'ed to reuse the register for another
* variable.
.unreq stop_address
.unreq zeroreg1
.unreq zeroreg2
.unreq tmp
endfunc zeromem
* AArch32 does not have special ways of zeroing normal memory as AArch64 does
* using the DC ZVA instruction, so we just alias zero_normalmem to zeromem.
.equ zero_normalmem, zeromem
/* --------------------------------------------------------------------------
* void memcpy4(void *dest, const void *src, unsigned int length)
* Copy length bytes from memory area src to memory area dest.
* The memory areas should not overlap.
* Destination and source addresses must be 4-byte aligned.
* --------------------------------------------------------------------------
func memcpy4
orr r3, r0, r1
tst r3, #0x3
/* copy 4 bytes at a time */
cmp r2, #4
blo m_loop1
ldr r3, [r1], #4
str r3, [r0], #4
sub r2, r2, #4
b m_loop4
/* copy byte per byte */
cmp r2,#0
beq m_end
ldrb r3, [r1], #1
strb r3, [r0], #1
subs r2, r2, #1
bne m_loop1
bx lr
endfunc memcpy4
/* ---------------------------------------------------------------------------
* Disable the MMU in Secure State
* ---------------------------------------------------------------------------
func disable_mmu_secure
mov r1, #(SCTLR_M_BIT | SCTLR_C_BIT)
ldcopr r0, SCTLR
bic r0, r0, r1
stcopr r0, SCTLR
isb // ensure MMU is off
dsb sy
bx lr
endfunc disable_mmu_secure
func disable_mmu_icache_secure
b do_disable_mmu
endfunc disable_mmu_icache_secure