tree 495bc7a5a4f1e4869e7b096c500f73ea13106ed2
parent 5b2e43658b4acaa74ab16419a4b3d436a08c222c
author Jacky Bai <ping.bai@nxp.com> 1547796071 +0800
committer Jacky Bai <ping.bai@nxp.com> 1548413477 +0800

plat: imx8mm: update the stby_count setting

The reset value of the STBY_COUNT is 0x0, so
it means GPC will wait for 4 ckil(32K) clock cycle
before checking the PMIC ready signal. increase
this value to 0x5, 128 ckil to make sure PMIC
output voltage is stable before GPC continue
to finish the DSM exit flow.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
(cherry picked from commit 94f65be918f91df676f0e61c4fef97dfd31e168f)