)]}'
{
  "commit": "5401ff2cb69952f05ceca11b6c4e4c48ef64c40d",
  "tree": "52ff5fdf47ec722ee7df6d0e410a2dc3542a5024",
  "parents": [
    "e52d7148fb24ee46566d28221456a360194876bc"
  ],
  "author": {
    "name": "Franck LENORMAND",
    "email": "franck.lenormand@nxp.com",
    "time": "Thu Aug 23 09:35:23 2018 +0200"
  },
  "committer": {
    "name": "Jacky Bai",
    "email": "ping.bai@nxp.com",
    "time": "Fri Jan 25 18:51:17 2019 +0800"
  },
  "message": "MLK-18619: [MX8MM-EVK]CSU_RDC: enable csu_rdc test in ATF make the board crash\n\ncsu_rdc test in ATF makes use of GPIO 4 and 5. Unfortunatly GPIO5 is\nbeing used by u-boot. This is why u-boot crashes.\nChanging the peripherals to protect, instead of gpio4 and 5, use csu\nand rdc registers instead.\n\nSigned-off-by: Silvano di Ninno \u003csilvano.dininno@nxp.com\u003e\nSigned-off-by: Franck LENORMAND \u003cfranck.lenormand@nxp.com\u003e\n(cherry picked from commit fe1cd0abc6c57cc59312ab751dd015cb149d7100)\n",
  "tree_diff": [
    {
      "type": "modify",
      "old_id": "85c1caf86b4ff439b1e0181bc12ac2703089985d",
      "old_mode": 33188,
      "old_path": "plat/imx/common/imx8m/imx_csu.c",
      "new_id": "1bb89d71d3724be33f4c75438feffc883296b8b0",
      "new_mode": 33188,
      "new_path": "plat/imx/common/imx8m/imx_csu.c"
    },
    {
      "type": "modify",
      "old_id": "1929c99b35c9e641ec30f52f86254cfa7f3a7f06",
      "old_mode": 33188,
      "old_path": "plat/imx/common/imx8m/imx_rdc.c",
      "new_id": "337db739ca235c82b79b86a0328af131e5b61931",
      "new_mode": 33188,
      "new_path": "plat/imx/common/imx8m/imx_rdc.c"
    },
    {
      "type": "modify",
      "old_id": "1820c4bb37c9fe517bc3c386cf24f45e2080ac11",
      "old_mode": 33188,
      "old_path": "plat/imx/imx8mm/imx8mm_bl31_setup.c",
      "new_id": "072950144a509d1bae0090645962137146485280",
      "new_mode": 33188,
      "new_path": "plat/imx/imx8mm/imx8mm_bl31_setup.c"
    }
  ]
}