blob: b6adc8a5305f27eceb469772ff22be70e9c35b9b [file] [log] [blame]
/*
* Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <assert.h>
#include <console.h>
#include <debug.h>
#include <mmio.h>
#include <platform_def.h>
#include <platform.h>
#include <psci.h>
#include "rpi3_hw.h"
/* Make composite power state parameter till power level 0 */
#if PSCI_EXTENDED_STATE_ID
#define rpi3_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
(((lvl0_state) << PSTATE_ID_SHIFT) | \
((type) << PSTATE_TYPE_SHIFT))
#else
#define rpi3_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type) \
(((lvl0_state) << PSTATE_ID_SHIFT) | \
((pwr_lvl) << PSTATE_PWR_LVL_SHIFT) | \
((type) << PSTATE_TYPE_SHIFT))
#endif /* PSCI_EXTENDED_STATE_ID */
#define rpi3_make_pwrstate_lvl1(lvl1_state, lvl0_state, pwr_lvl, type) \
(((lvl1_state) << PLAT_LOCAL_PSTATE_WIDTH) | \
rpi3_make_pwrstate_lvl0(lvl0_state, pwr_lvl, type))
/*
* The table storing the valid idle power states. Ensure that the
* array entries are populated in ascending order of state-id to
* enable us to use binary search during power state validation.
* The table must be terminated by a NULL entry.
*/
static const unsigned int rpi3_pm_idle_states[] = {
/* State-id - 0x01 */
rpi3_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_RET,
MPIDR_AFFLVL0, PSTATE_TYPE_STANDBY),
/* State-id - 0x02 */
rpi3_make_pwrstate_lvl1(PLAT_LOCAL_STATE_RUN, PLAT_LOCAL_STATE_OFF,
MPIDR_AFFLVL0, PSTATE_TYPE_POWERDOWN),
/* State-id - 0x22 */
rpi3_make_pwrstate_lvl1(PLAT_LOCAL_STATE_OFF, PLAT_LOCAL_STATE_OFF,
MPIDR_AFFLVL1, PSTATE_TYPE_POWERDOWN),
0,
};
/*******************************************************************************
* Platform handler called to check the validity of the power state
* parameter. The power state parameter has to be a composite power state.
******************************************************************************/
static int rpi3_validate_power_state(unsigned int power_state,
psci_power_state_t *req_state)
{
unsigned int state_id;
int i;
assert(req_state != 0);
/*
* Currently we are using a linear search for finding the matching
* entry in the idle power state array. This can be made a binary
* search if the number of entries justify the additional complexity.
*/
for (i = 0; rpi3_pm_idle_states[i] != 0; i++) {
if (power_state == rpi3_pm_idle_states[i]) {
break;
}
}
/* Return error if entry not found in the idle state array */
if (!rpi3_pm_idle_states[i]) {
return PSCI_E_INVALID_PARAMS;
}
i = 0;
state_id = psci_get_pstate_id(power_state);
/* Parse the State ID and populate the state info parameter */
while (state_id) {
req_state->pwr_domain_state[i++] = state_id &
PLAT_LOCAL_PSTATE_MASK;
state_id >>= PLAT_LOCAL_PSTATE_WIDTH;
}
return PSCI_E_SUCCESS;
}
/*******************************************************************************
* Platform handler called when a CPU is about to enter standby.
******************************************************************************/
static void rpi3_cpu_standby(plat_local_state_t cpu_state)
{
assert(cpu_state == PLAT_LOCAL_STATE_RET);
/*
* Enter standby state.
* dsb is good practice before using wfi to enter low power states
*/
dsb();
wfi();
}
/*******************************************************************************
* Platform handler called when a power domain is about to be turned on. The
* mpidr determines the CPU to be turned on.
******************************************************************************/
static int rpi3_pwr_domain_on(u_register_t mpidr)
{
int rc = PSCI_E_SUCCESS;
unsigned int pos = plat_core_pos_by_mpidr(mpidr);
uint64_t *hold_base = (uint64_t *)PLAT_RPI3_TM_HOLD_BASE;
assert(pos < PLATFORM_CORE_COUNT);
hold_base[pos] = PLAT_RPI3_TM_HOLD_STATE_GO;
/* Make sure that the write has completed */
dsb();
isb();
sev();
return rc;
}
/*******************************************************************************
* Platform handler called when a power domain has just been powered on after
* being turned off earlier. The target_state encodes the low power state that
* each level has woken up from.
******************************************************************************/
void rpi3_pwr_domain_on_finish(const psci_power_state_t *target_state)
{
assert(target_state->pwr_domain_state[MPIDR_AFFLVL0] ==
PLAT_LOCAL_STATE_OFF);
}
/*******************************************************************************
* Platform handlers for system reset and system off.
******************************************************************************/
/* 10 ticks (Watchdog timer = Timer clock / 16) */
#define RESET_TIMEOUT U(10)
static void __dead2 rpi3_watchdog_reset(void)
{
uint32_t rstc;
console_flush();
dsbsy();
isb();
mmio_write_32(RPI3_PM_BASE + RPI3_PM_WDOG_OFFSET,
RPI3_PM_PASSWORD | RESET_TIMEOUT);
rstc = mmio_read_32(RPI3_PM_BASE + RPI3_PM_RSTC_OFFSET);
rstc &= ~RPI3_PM_RSTC_WRCFG_MASK;
rstc |= RPI3_PM_PASSWORD | RPI3_PM_RSTC_WRCFG_FULL_RESET;
mmio_write_32(RPI3_PM_BASE + RPI3_PM_RSTC_OFFSET, rstc);
for (;;) {
wfi();
}
}
static void __dead2 rpi3_system_reset(void)
{
INFO("rpi3: PSCI_SYSTEM_RESET: Invoking watchdog reset\n");
rpi3_watchdog_reset();
}
static void __dead2 rpi3_system_off(void)
{
uint32_t rsts;
INFO("rpi3: PSCI_SYSTEM_OFF: Invoking watchdog reset\n");
/*
* This function doesn't actually make the Raspberry Pi turn itself off,
* the hardware doesn't allow it. It simply reboots it and the RSTS
* value tells the bootcode.bin firmware not to continue the regular
* bootflow and to stay in a low power mode.
*/
rsts = mmio_read_32(RPI3_PM_BASE + RPI3_PM_RSTS_OFFSET);
rsts |= RPI3_PM_PASSWORD | RPI3_PM_RSTS_WRCFG_HALT;
mmio_write_32(RPI3_PM_BASE + RPI3_PM_RSTS_OFFSET, rsts);
rpi3_watchdog_reset();
}
/*******************************************************************************
* Platform handlers and setup function.
******************************************************************************/
static const plat_psci_ops_t plat_rpi3_psci_pm_ops = {
.cpu_standby = rpi3_cpu_standby,
.pwr_domain_on = rpi3_pwr_domain_on,
.pwr_domain_on_finish = rpi3_pwr_domain_on_finish,
.system_off = rpi3_system_off,
.system_reset = rpi3_system_reset,
.validate_power_state = rpi3_validate_power_state,
};
int plat_setup_psci_ops(uintptr_t sec_entrypoint,
const plat_psci_ops_t **psci_ops)
{
uintptr_t *entrypoint = (void *) PLAT_RPI3_TM_ENTRYPOINT;
*entrypoint = sec_entrypoint;
*psci_ops = &plat_rpi3_psci_pm_ops;
return 0;
}