blob: aa1c336e244c5747f07008cdb2450c92355b8d98 [file] [log] [blame]
/*
* Copyright 2017-2018 NXP
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <arch_helpers.h>
#include <assert.h>
#include <bl_common.h>
#include <console.h>
#include <context.h>
#include <context_mgmt.h>
#include <debug.h>
#include <stdbool.h>
#include <dram.h>
#include <generic_delay_timer.h>
#include <mmio.h>
#include <platform.h>
#include <platform_def.h>
#include <plat_imx8.h>
#include <xlat_tables.h>
#include <soc.h>
#include <tzc380.h>
#include <imx_csu.h>
#include <imx_rdc.h>
#include <uart.h>
IMPORT_SYM(unsigned long, __COHERENT_RAM_START__, BL31_COHERENT_RAM_START);
IMPORT_SYM(unsigned long, __COHERENT_RAM_END__, BL31_COHERENT_RAM_END);
IMPORT_SYM(unsigned long, __RO_START__, BL31_RO_START);
IMPORT_SYM(unsigned long, __RO_END__, BL31_RO_END);
IMPORT_SYM(unsigned long, __RW_START__, BL31_RW_START);
IMPORT_SYM(unsigned long, __RW_END__, BL31_RW_END);
#define CAAM_BASE (0x30900000) /* HW address*/
#define JR0_BASE (CAAM_BASE + 0x1000)
#define CAAM_JR0MID (0x30900010)
#define CAAM_JR1MID (0x30900018)
#define CAAM_JR2MID (0x30900020)
#define CAAM_NS_MID (0x1)
#define SM_P0_PERM (JR0_BASE + 0xa04)
#define SM_P0_SMAG2 (JR0_BASE + 0xa08)
#define SM_P0_SMAG1 (JR0_BASE + 0xa0c)
#define SM_CMD (JR0_BASE + 0xbe4)
/* secure memory command */
#define SMC_PAGE_SHIFT 16
#define SMC_PART_SHIFT 8
#define SMC_CMD_ALLOC_PAGE 0x01 /* allocate page to this partition */
#define SMC_CMD_DEALLOC_PART 0x03 /* deallocate partition */
#define TRUSTY_PARAMS_LEN_BYTES (4096*2)
static entry_point_info_t bl32_image_ep_info;
static entry_point_info_t bl33_image_ep_info;
#define IMX_DDR_BASE 0x40000000
#if defined(DECRYPTED_BUFFER_START) && defined(DECRYPTED_BUFFER_LEN)
#define DECRYPTED_BUFFER_END DECRYPTED_BUFFER_START + DECRYPTED_BUFFER_LEN
#endif
#if defined(DECODED_BUFFER_START) && defined(DECODED_BUFFER_LEN)
#define DECODED_BUFFER_END DECODED_BUFFER_START + DECODED_BUFFER_LEN
#endif
#if !defined(DECRYPTED_BUFFER_END) && !defined(DECODED_BUFFER_END)
#define RDC_DISABLED
#else
static struct rdc_mda_conf masters_config[] = {
{RDC_MDA_A53, 0, 1},
{RDC_MDA_GPU, 1, 1},
{RDC_MDA_VPU_DEC, 2, 1},
{RDC_MDA_CAAM, 3, 1},
};
#endif
/* set RDC settings */
static void bl31_imx_rdc_setup(void)
{
#ifdef RDC_DISABLED
NOTICE("RDC off \n");
#else
struct imx_rdc_regs *imx_rdc = (struct imx_rdc_regs *)IMX_RDC_BASE;
NOTICE("RDC imx_rdc_set_masters default \n");
imx_rdc_set_masters(masters_config, ARRAY_SIZE(masters_config));
/*
* Need to substact offset 0x40000000 from CPU address when
* programming rdc region for i.mx8mq.
*/
#ifdef DECRYPTED_BUFFER_START
/* Domain 2 no write access to memory region below decrypted video */
/* Prevent VPU to decode outside secure decoded buffer */
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[2].mrsa), 0);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[2].mrea), (DECRYPTED_BUFFER_START - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[2].mrc), 0xC00000AF);
#endif // DECRYPTED_BUFFER_START
#ifdef DECRYPTED_BUFFER_END
NOTICE("RDC setup memory_region[0] decrypted buffer DID0 W DID2 R/W\n");
/* Domain 0 memory region W decrypted video */
/* Domain 2 memory region R decrypted video */
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[0].mrsa), (DECRYPTED_BUFFER_START - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[0].mrea), (DECRYPTED_BUFFER_END - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[0].mrc), 0xC0000061);
#endif // DECRYPTED_BUFFER_END
#ifdef DECODED_BUFFER_END
NOTICE("RDC setup memory_region[1] decoded buffer DID2 R/W DID3 R/W\n");
/* Domain 1+2 memory region R/W decoded video */
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[1].mrsa), (DECODED_BUFFER_START - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[1].mrea), (DECODED_BUFFER_END - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[1].mrc), 0xC000003D);
/* Domain 1+2+3 no access to memory region above decoded video */
/* Only CPU in secure mode can access TEE memory region (cf TZASC configuration) */
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[3].mrsa), (DECODED_BUFFER_END - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[3].mrea), (0xC0000000 - IMX_DDR_BASE) >> 1);
mmio_write_32((uintptr_t)&(imx_rdc->mem_region[3].mrc), 0xC00000C3);
#endif // DECODED_BUFFER_END
#endif // RDC_DISABLED
}
/* get SPSR for BL33 entry */
static uint32_t get_spsr_for_bl33_entry(void)
{
unsigned long el_status;
unsigned long mode;
uint32_t spsr;
/* figure out what mode we enter the non-secure world */
el_status = read_id_aa64pfr0_el1() >> ID_AA64PFR0_EL2_SHIFT;
el_status &= ID_AA64PFR0_ELX_MASK;
mode = (el_status) ? MODE_EL2 : MODE_EL1;
spsr = SPSR_64(mode, MODE_SP_ELX, DISABLE_ALL_EXCEPTIONS);
return spsr;
}
#define SCTR_BASE_ADDR 0x306c0000
#define CNTFID0_OFF 0x20
#define CNTFID1_OFF 0x24
#define SC_CNTCR_ENABLE (1 << 0)
#define SC_CNTCR_HDBG (1 << 1)
#define SC_CNTCR_FREQ0 (1 << 8)
#define SC_CNTCR_FREQ1 (1 << 9)
#define GPR_TZASC_EN (1 << 0)
#define GPR_TZASC_EN_LOCK (1 << 16)
void bl31_tzc380_setup(void)
{
unsigned int val;
val = mmio_read_32(IMX_IOMUX_GPR_BASE + 0x28);
if ((val & GPR_TZASC_EN) != GPR_TZASC_EN)
return;
NOTICE("Configuring TZASC380\n");
tzc380_init(IMX_TZASC_BASE);
/*
* Need to substact offset 0x40000000 from CPU address when
* programming tzasc region for i.mx8mq.
*/
/* Enable 1G-5G S/NS RW */
tzc380_configure_region(0, 0x00000000, TZC_ATTR_REGION_SIZE(TZC_REGION_SIZE_4G) | TZC_ATTR_REGION_EN_MASK | TZC_ATTR_SP_ALL);
tzc380_dump_state();
}
static void imx8mm_caam_config(void)
{
uint32_t sm_cmd;
/* Dealloc part 0 and 2 with current DID */
sm_cmd = (0 << SMC_PART_SHIFT | SMC_CMD_DEALLOC_PART);
mmio_write_32(SM_CMD, sm_cmd);
sm_cmd = (2 << SMC_PART_SHIFT | SMC_CMD_DEALLOC_PART);
mmio_write_32(SM_CMD, sm_cmd);
/* config CAAM JRaMID set MID to Cortex A */
mmio_write_32(CAAM_JR0MID, CAAM_NS_MID);
mmio_write_32(CAAM_JR1MID, CAAM_NS_MID);
mmio_write_32(CAAM_JR2MID, CAAM_NS_MID);
/* Alloc partition 0 writing SMPO and SMAGs */
mmio_write_32(SM_P0_PERM, 0xff);
mmio_write_32(SM_P0_SMAG2, 0xffffffff);
mmio_write_32(SM_P0_SMAG1, 0xffffffff);
/* Allocate page 0 and 1 to partition 0 with DID set */
sm_cmd = (0 << SMC_PAGE_SHIFT
| 0 << SMC_PART_SHIFT
| SMC_CMD_ALLOC_PAGE);
mmio_write_32(SM_CMD, sm_cmd);
sm_cmd = (1 << SMC_PAGE_SHIFT
| 0 << SMC_PART_SHIFT
| SMC_CMD_ALLOC_PAGE);
mmio_write_32(SM_CMD, sm_cmd);
}
static void imx8mm_aips_config(void)
{
/* config the AIPSTZ1 */
mmio_write_32(0x301f0000, 0x77777777);
mmio_write_32(0x301f0004, 0x77777777);
mmio_write_32(0x301f0040, 0x0);
mmio_write_32(0x301f0044, 0x0);
mmio_write_32(0x301f0048, 0x0);
mmio_write_32(0x301f004c, 0x0);
mmio_write_32(0x301f0050, 0x0);
/* config the AIPSTZ2 */
mmio_write_32(0x305f0000, 0x77777777);
mmio_write_32(0x305f0004, 0x77777777);
mmio_write_32(0x305f0040, 0x0);
mmio_write_32(0x305f0044, 0x0);
mmio_write_32(0x305f0048, 0x0);
mmio_write_32(0x305f004c, 0x0);
mmio_write_32(0x305f0050, 0x0);
/* config the AIPSTZ3 */
mmio_write_32(0x309f0000, 0x77777777);
mmio_write_32(0x309f0004, 0x77777777);
mmio_write_32(0x309f0040, 0x0);
mmio_write_32(0x309f0044, 0x0);
mmio_write_32(0x309f0048, 0x0);
mmio_write_32(0x309f004c, 0x0);
mmio_write_32(0x309f0050, 0x0);
/* config the AIPSTZ4 */
mmio_write_32(0x32df0000, 0x77777777);
mmio_write_32(0x32df0004, 0x77777777);
mmio_write_32(0x32df0040, 0x0);
mmio_write_32(0x32df0044, 0x0);
mmio_write_32(0x32df0048, 0x0);
mmio_write_32(0x32df004c, 0x0);
mmio_write_32(0x32df0050, 0x0);
}
void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
u_register_t arg2, u_register_t arg3)
{
#if DEBUG_CONSOLE
static console_uart_t console;
#endif
int i;
/* enable CSU NS access permission */
for (i = 0; i < 64; i++) {
mmio_write_32(0x303e0000 + i * 4, 0x00ff00ff);
}
/* config the aips access permission */
imx8mm_aips_config();
/* config the caam access permission */
imx8mm_caam_config();
#if DEBUG_CONSOLE
console_uart_register(IMX_BOOT_UART_BASE, IMX_BOOT_UART_CLK_IN_HZ,
IMX_CONSOLE_BAUDRATE, &console);
#endif
/*
* tell BL3-1 where the non-secure software image is located
* and the entry state information.
*/
bl33_image_ep_info.pc = PLAT_NS_IMAGE_OFFSET;
bl33_image_ep_info.spsr = get_spsr_for_bl33_entry();
SET_SECURITY_STATE(bl33_image_ep_info.h.attr, NON_SECURE);
#ifdef TEE_IMX8
/* Populate entry point information for BL32 */
SET_PARAM_HEAD(&bl32_image_ep_info, PARAM_EP, VERSION_1, 0);
SET_SECURITY_STATE(bl32_image_ep_info.h.attr, SECURE);
bl32_image_ep_info.pc = BL32_BASE;
bl32_image_ep_info.spsr = 0;
#ifdef SPD_trusty
bl32_image_ep_info.args.arg0 = BL32_SIZE;
bl32_image_ep_info.args.arg1 = BL32_BASE;
#else
/* Pass TEE base and size to uboot */
bl33_image_ep_info.args.arg1 = 0xBE000000;
#endif
/* TEE size + RDC reserved memory = 0x2000000 + 0x2000000 + 0x30000000 */
#ifdef DECRYPTED_BUFFER_START
bl33_image_ep_info.args.arg2 = 0xC0000000 - DECRYPTED_BUFFER_START;
#else
bl33_image_ep_info.args.arg2 = 0x2000000;
#endif
#endif
bl31_tzc380_setup();
/* Assign M4 to domain 1 */
mmio_write_32(IMX_RDC_BASE + 0x204, 0x1);
mmio_write_32(IMX_RDC_BASE + 0x518, 0xfc);
mmio_write_32(IMX_RDC_BASE + 0x5A4, 0xf3);
#if defined (CSU_RDC_TEST)
csu_test();
rdc_test();
#endif
bl31_imx_rdc_setup();
}
void bl31_plat_arch_setup(void)
{
/* add the mmap */
mmap_add_region(0x900000, 0x900000, 0x40000,
MT_MEMORY | MT_RW);
mmap_add_region(0x100000, 0x100000, 0x10000,
MT_MEMORY | MT_RW);
mmap_add_region(0x40000000, 0x40000000, 0xc0000000,
MT_MEMORY | MT_RW | MT_NS);
mmap_add_region(BL31_BASE, BL31_BASE, BL31_RO_END - BL31_RO_START,
MT_MEMORY | MT_RO);
mmap_add_region(IMX_ROM_BASE, IMX_ROM_BASE,
0x40000, MT_MEMORY | MT_RO);
/* Map GPV */
mmap_add_region(IMX_GPV_BASE, IMX_GPV_BASE, IMX_GPV_SIZE, MT_DEVICE | MT_RW);
/* Map AIPS 1~3 */
mmap_add_region(IMX_AIPS_BASE, IMX_AIPS_BASE, IMX_AIPS_SIZE, MT_DEVICE | MT_RW);
/* map AIPS4 */
mmap_add_region(0x32c00000, 0x32c00000, 0x400000, MT_DEVICE | MT_RW);
/* map GIC */
mmap_add_region(PLAT_GIC_BASE, PLAT_GIC_BASE, 0x100000, MT_DEVICE | MT_RW);
/* Map DDRC/PHY/PERF */
mmap_add_region(0x3c000000, 0x3c000000, 0x4000000, MT_DEVICE | MT_RW);
mmap_add_region(0x180000, 0x180000, 0x8000, MT_MEMORY | MT_RW);
mmap_add_region(0x38330000, 0x38330000, 0x100000, MT_DEVICE | MT_RW);
#ifdef SPD_trusty
mmap_add_region(BL32_BASE, BL32_BASE, BL32_SIZE, MT_MEMORY | MT_RW);
#endif
#if USE_COHERENT_MEM
mmap_add_region(BL31_COHERENT_RAM_BASE, BL31_COHERENT_RAM_BASE,
BL31_COHERENT_RAM_LIMIT - BL31_COHERENT_RAM_BASE,
MT_DEVICE | MT_RW);
#endif
/* setup xlat table */
init_xlat_tables();
/* enable the MMU */
enable_mmu_el3(0);
}
void bl31_platform_setup(void)
{
generic_delay_timer_init();
/* select the CKIL source to 32K OSC */
mmio_write_32(0x30360124, 0x1);
/* init the dram info */
dram_info_init(SAVED_DRAM_TIMING_BASE);
/* init the GICv3 cpu and distributor interface */
plat_gic_driver_init();
plat_gic_init();
/* gpc init */
imx_gpc_init();
}
entry_point_info_t *bl31_plat_get_next_image_ep_info(unsigned int type)
{
if (type == NON_SECURE)
return &bl33_image_ep_info;
if (type == SECURE)
return &bl32_image_ep_info;
return NULL;
}
unsigned int plat_get_syscnt_freq2(void)
{
return COUNTER_FREQUENCY;
}
void bl31_plat_runtime_setup(void)
{
return;
}
#ifdef SPD_trusty
void plat_trusty_set_boot_args(aapcs64_params_t *args)
{
args->arg0 = BL32_SIZE;
args->arg1 = BL32_BASE;
args->arg2 = TRUSTY_PARAMS_LEN_BYTES;
}
#endif