blob: c9790ade1626951217dd3d2700b4efe4f5d0b16d [file] [log] [blame]
/*
* Copyright (C) 2012 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef _LIBS_CUTILS_TRACE_H
#define _LIBS_CUTILS_TRACE_H
#include <inttypes.h>
#include <stdatomic.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <sys/cdefs.h>
#include <sys/types.h>
#include <unistd.h>
#include <cutils/compiler.h>
__BEGIN_DECLS
/**
* The ATRACE_TAG macro can be defined before including this header to trace
* using one of the tags defined below. It must be defined to one of the
* following ATRACE_TAG_* macros. The trace tag is used to filter tracing in
* userland to avoid some of the runtime cost of tracing when it is not desired.
*
* Defining ATRACE_TAG to be ATRACE_TAG_ALWAYS will result in the tracing always
* being enabled - this should ONLY be done for debug code, as userland tracing
* has a performance cost even when the trace is not being recorded. Defining
* ATRACE_TAG to be ATRACE_TAG_NEVER or leaving ATRACE_TAG undefined will result
* in the tracing always being disabled.
*
* ATRACE_TAG_HAL should be bitwise ORed with the relevant tags for tracing
* within a hardware module. For example a camera hardware module would set:
* #define ATRACE_TAG (ATRACE_TAG_CAMERA | ATRACE_TAG_HAL)
*
* Keep these in sync with frameworks/base/core/java/android/os/Trace.java.
*/
#define ATRACE_TAG_NEVER 0 // This tag is never enabled.
#define ATRACE_TAG_ALWAYS (1<<0) // This tag is always enabled.
#define ATRACE_TAG_GRAPHICS (1<<1)
#define ATRACE_TAG_INPUT (1<<2)
#define ATRACE_TAG_VIEW (1<<3)
#define ATRACE_TAG_WEBVIEW (1<<4)
#define ATRACE_TAG_WINDOW_MANAGER (1<<5)
#define ATRACE_TAG_ACTIVITY_MANAGER (1<<6)
#define ATRACE_TAG_SYNC_MANAGER (1<<7)
#define ATRACE_TAG_AUDIO (1<<8)
#define ATRACE_TAG_VIDEO (1<<9)
#define ATRACE_TAG_CAMERA (1<<10)
#define ATRACE_TAG_HAL (1<<11)
#define ATRACE_TAG_APP (1<<12)
#define ATRACE_TAG_RESOURCES (1<<13)
#define ATRACE_TAG_DALVIK (1<<14)
#define ATRACE_TAG_RS (1<<15)
#define ATRACE_TAG_BIONIC (1<<16)
#define ATRACE_TAG_POWER (1<<17)
#define ATRACE_TAG_PACKAGE_MANAGER (1<<18)
#define ATRACE_TAG_SYSTEM_SERVER (1<<19)
#define ATRACE_TAG_DATABASE (1<<20)
#define ATRACE_TAG_LAST ATRACE_TAG_DATABASE
// Reserved for initialization.
#define ATRACE_TAG_NOT_READY (1ULL<<63)
#define ATRACE_TAG_VALID_MASK ((ATRACE_TAG_LAST - 1) | ATRACE_TAG_LAST)
#ifndef ATRACE_TAG
#define ATRACE_TAG ATRACE_TAG_NEVER
#elif ATRACE_TAG > ATRACE_TAG_VALID_MASK
#error ATRACE_TAG must be defined to be one of the tags defined in cutils/trace.h
#endif
/**
* Opens the trace file for writing and reads the property for initial tags.
* The atrace.tags.enableflags property sets the tags to trace.
* This function should not be explicitly called, the first call to any normal
* trace function will cause it to be run safely.
*/
void atrace_setup();
/**
* If tracing is ready, set atrace_enabled_tags to the system property
* debug.atrace.tags.enableflags. Can be used as a sysprop change callback.
*/
void atrace_update_tags();
/**
* Set whether the process is debuggable. By default the process is not
* considered debuggable. If the process is not debuggable then application-
* level tracing is not allowed unless the ro.debuggable system property is
* set to '1'.
*/
void atrace_set_debuggable(bool debuggable);
/**
* Set whether tracing is enabled for the current process. This is used to
* prevent tracing within the Zygote process.
*/
void atrace_set_tracing_enabled(bool enabled);
/**
* Flag indicating whether setup has been completed, initialized to 0.
* Nonzero indicates setup has completed.
* Note: This does NOT indicate whether or not setup was successful.
*/
extern atomic_bool atrace_is_ready;
/**
* Set of ATRACE_TAG flags to trace for, initialized to ATRACE_TAG_NOT_READY.
* A value of zero indicates setup has failed.
* Any other nonzero value indicates setup has succeeded, and tracing is on.
*/
extern uint64_t atrace_enabled_tags;
/**
* Handle to the kernel's trace buffer, initialized to -1.
* Any other value indicates setup has succeeded, and is a valid fd for tracing.
*/
extern int atrace_marker_fd;
/**
* atrace_init readies the process for tracing by opening the trace_marker file.
* Calling any trace function causes this to be run, so calling it is optional.
* This can be explicitly run to avoid setup delay on first trace function.
*/
#define ATRACE_INIT() atrace_init()
static inline void atrace_init()
{
if (CC_UNLIKELY(!atomic_load_explicit(&atrace_is_ready, memory_order_acquire))) {
atrace_setup();
}
}
/**
* Get the mask of all tags currently enabled.
* It can be used as a guard condition around more expensive trace calculations.
* Every trace function calls this, which ensures atrace_init is run.
*/
#define ATRACE_GET_ENABLED_TAGS() atrace_get_enabled_tags()
static inline uint64_t atrace_get_enabled_tags()
{
atrace_init();
return atrace_enabled_tags;
}
/**
* Test if a given tag is currently enabled.
* Returns nonzero if the tag is enabled, otherwise zero.
* It can be used as a guard condition around more expensive trace calculations.
*/
#define ATRACE_ENABLED() atrace_is_tag_enabled(ATRACE_TAG)
static inline uint64_t atrace_is_tag_enabled(uint64_t tag)
{
return atrace_get_enabled_tags() & tag;
}
/**
* Trace the beginning of a context. name is used to identify the context.
* This is often used to time function execution.
*/
#define ATRACE_BEGIN(name) atrace_begin(ATRACE_TAG, name)
static inline void atrace_begin(uint64_t tag, const char* name)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
void atrace_begin_body(const char*);
atrace_begin_body(name);
}
}
/**
* Trace the end of a context.
* This should match up (and occur after) a corresponding ATRACE_BEGIN.
*/
#define ATRACE_END() atrace_end(ATRACE_TAG)
static inline void atrace_end(uint64_t tag)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
char c = 'E';
write(atrace_marker_fd, &c, 1);
}
}
/**
* Trace the beginning of an asynchronous event. Unlike ATRACE_BEGIN/ATRACE_END
* contexts, asynchronous events do not need to be nested. The name describes
* the event, and the cookie provides a unique identifier for distinguishing
* simultaneous events. The name and cookie used to begin an event must be
* used to end it.
*/
#define ATRACE_ASYNC_BEGIN(name, cookie) \
atrace_async_begin(ATRACE_TAG, name, cookie)
static inline void atrace_async_begin(uint64_t tag, const char* name,
int32_t cookie)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
void atrace_async_begin_body(const char*, int32_t);
atrace_async_begin_body(name, cookie);
}
}
/**
* Trace the end of an asynchronous event.
* This should have a corresponding ATRACE_ASYNC_BEGIN.
*/
#define ATRACE_ASYNC_END(name, cookie) atrace_async_end(ATRACE_TAG, name, cookie)
static inline void atrace_async_end(uint64_t tag, const char* name, int32_t cookie)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
void atrace_async_end_body(const char*, int32_t);
atrace_async_end_body(name, cookie);
}
}
/**
* Traces an integer counter value. name is used to identify the counter.
* This can be used to track how a value changes over time.
*/
#define ATRACE_INT(name, value) atrace_int(ATRACE_TAG, name, value)
static inline void atrace_int(uint64_t tag, const char* name, int32_t value)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
void atrace_int_body(const char*, int32_t);
atrace_int_body(name, value);
}
}
/**
* Traces a 64-bit integer counter value. name is used to identify the
* counter. This can be used to track how a value changes over time.
*/
#define ATRACE_INT64(name, value) atrace_int64(ATRACE_TAG, name, value)
static inline void atrace_int64(uint64_t tag, const char* name, int64_t value)
{
if (CC_UNLIKELY(atrace_is_tag_enabled(tag))) {
void atrace_int64_body(const char*, int64_t);
atrace_int64_body(name, value);
}
}
__END_DECLS
#endif // _LIBS_CUTILS_TRACE_H